From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 26 Nov 2020 12:02:21 +0100 Subject: [PATCH] realtek: update the tree to the latest refactored version MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit * rename the target to realtek * add refactored DSA driver * add latest gpio driver * lots of arch cleanups * new irq driver * additional boards Signed-off-by: Bert Vermeulen Signed-off-by: Birger Koblitz Signed-off-by: Sander Vanheule Signed-off-by: Bjørn Mork Signed-off-by: John Crispin --- target/linux/{rtl838x => realtek}/Makefile | 4 +- .../base-files/etc/board.d/01_leds | 0 .../base-files/etc/board.d/02_network | 4 +- .../base-files/etc/inittab | 0 .../base-files/lib/upgrade/platform.sh | 0 target/linux/{rtl838x => realtek}/config-5.4 | 66 +- .../dts/rtl8380_netgear_gs110tpp-v1.dts | 226 ++ .../dts/rtl8382_allnet_all-sg8208m.dts | 0 .../dts/rtl8382_d-link_dgs-1210-10p.dts | 0 .../dts/rtl8382_d-link_dgs-1210-16.dts | 0 .../dts/rtl8382_d-link_dgs-1210-28.dts | 0 .../dts/rtl8382_d-link_dgs-1210.dtsi | 0 .../{rtl838x => realtek}/dts/rtl838x.dtsi | 50 +- .../mips/include/asm/mach-rtl838x/ioremap.h | 0 .../arch/mips/include/asm/mach-rtl838x/irq.h | 66 + .../include/asm/mach-rtl838x/mach-rtl83xx.h} | 77 +- .../files-5.4/arch/mips/rtl838x/Makefile | 2 +- .../files-5.4/arch/mips/rtl838x/Platform | 0 .../realtek/files-5.4/arch/mips/rtl838x/irq.c | 167 ++ .../files-5.4/arch/mips/rtl838x/prom.c | 66 +- .../files-5.4/arch/mips/rtl838x/setup.c | 91 +- .../files-5.4/drivers/gpio/gpio-rtl8231.c | 321 ++ .../files-5.4/drivers/gpio/gpio-rtl838x.c | 425 +++ .../drivers/mtd/spi-nor/rtl838x-nor.c | 4 +- .../drivers/mtd/spi-nor/rtl838x-spi.h | 6 +- .../files-5.4/drivers/net/dsa/rtl83xx/Kconfig | 8 + .../drivers/net/dsa/rtl83xx/Makefile | 3 + .../drivers/net/dsa/rtl83xx/common.c | 407 +++ .../drivers/net/dsa/rtl83xx/debugfs.c | 99 + .../files-5.4/drivers/net/dsa/rtl83xx/dsa.c | 1170 ++++++++ .../drivers/net/dsa/rtl83xx/rtl838x.c | 476 +++ .../drivers/net/dsa/rtl83xx}/rtl838x.h | 81 +- .../drivers/net/dsa/rtl83xx/rtl839x.c | 514 ++++ .../drivers/net/dsa/rtl83xx/rtl83xx.h | 44 + .../files-5.4/drivers/net/dsa/rtl83xx/storm.c | 64 + .../drivers/net/ethernet/rtl838x_eth.c | 136 +- .../drivers/net/ethernet/rtl838x_eth.h | 6 +- .../files-5.4/drivers/net/phy/rtl83xx-phy.c} | 341 +-- .../files-5.4/drivers/net/phy/rtl83xx-phy.h | 40 + .../firmware/rtl838x_phy/rtl838x_8214fc.fw | Bin .../firmware/rtl838x_phy/rtl838x_8218b.fw | Bin .../firmware/rtl838x_phy/rtl838x_8380.fw | Bin .../{rtl838x => realtek}/generic/target.mk | 0 .../linux/{rtl838x => realtek}/image/Makefile | 13 + .../300-mips-add-rtl838x-platform.patch | 21 +- .../301-gpio-add-rtl838x-driver.patch | 11 +- ...400-mtd-add-rtl838x-spi-flash-driver.patch | 0 ...t-dsa-add-support-for-rtl838x-switch.patch | 22 + ...-add-rtl838x-support-for-tag-trailer.patch | 12 +- ...a-increase-dsa-max-ports-for-rtl838x.patch | 0 ...net-add-support-for-rtl838x-ethernet.patch | 0 ...nclude-linux-add-phy-ops-for-rtl838x.patch | 0 ...vers-net-phy-eee-support-for-rtl838x.patch | 0 .../realtek/patches-5.4/705-add-rtl-phy.patch | 13 + ...rease-phy-address-number-for-rtl839x.patch | 11 + .../profiles/00-default.mk | 0 .../arch/mips/include/asm/mach-rtl838x/irq.h | 10 - .../rtl838x/files-5.4/arch/mips/rtl838x/irq.c | 203 -- .../files-5.4/arch/mips/rtl838x/serial.c | 100 - .../files-5.4/drivers/gpio/gpio-rtl838x.c | 806 ----- .../files-5.4/drivers/net/dsa/rtl838x_sw.c | 2612 ----------------- ...t-dsa-add-support-for-rtl838x-switch.patch | 26 - 62 files changed, 4570 insertions(+), 4254 deletions(-) rename target/linux/{rtl838x => realtek}/Makefile (88%) rename target/linux/{rtl838x => realtek}/base-files/etc/board.d/01_leds (100%) rename target/linux/{rtl838x => realtek}/base-files/etc/board.d/02_network (90%) rename target/linux/{rtl838x => realtek}/base-files/etc/inittab (100%) rename target/linux/{rtl838x => realtek}/base-files/lib/upgrade/platform.sh (100%) rename target/linux/{rtl838x => realtek}/config-5.4 (70%) create mode 100644 target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts rename target/linux/{rtl838x => realtek}/dts/rtl8382_allnet_all-sg8208m.dts (100%) rename target/linux/{rtl838x => realtek}/dts/rtl8382_d-link_dgs-1210-10p.dts (100%) rename target/linux/{rtl838x => realtek}/dts/rtl8382_d-link_dgs-1210-16.dts (100%) rename target/linux/{rtl838x => realtek}/dts/rtl8382_d-link_dgs-1210-28.dts (100%) rename target/linux/{rtl838x => realtek}/dts/rtl8382_d-link_dgs-1210.dtsi (100%) rename target/linux/{rtl838x => realtek}/dts/rtl838x.dtsi (73%) rename target/linux/{rtl838x => realtek}/files-5.4/arch/mips/include/asm/mach-rtl838x/ioremap.h (100%) create mode 100644 target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h rename target/linux/{rtl838x/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl838x.h => realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h} (85%) rename target/linux/{rtl838x => realtek}/files-5.4/arch/mips/rtl838x/Makefile (61%) rename target/linux/{rtl838x => realtek}/files-5.4/arch/mips/rtl838x/Platform (100%) create mode 100644 target/linux/realtek/files-5.4/arch/mips/rtl838x/irq.c rename target/linux/{rtl838x => realtek}/files-5.4/arch/mips/rtl838x/prom.c (67%) rename target/linux/{rtl838x => realtek}/files-5.4/arch/mips/rtl838x/setup.c (61%) create mode 100644 target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl8231.c create mode 100644 target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl838x.c rename target/linux/{rtl838x => realtek}/files-5.4/drivers/mtd/spi-nor/rtl838x-nor.c (99%) rename target/linux/{rtl838x => realtek}/files-5.4/drivers/mtd/spi-nor/rtl838x-spi.h (95%) create mode 100644 target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/Kconfig create mode 100644 target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/Makefile create mode 100644 target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c create mode 100644 target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/debugfs.c create mode 100644 target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c create mode 100644 target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c rename target/linux/{rtl838x/files-5.4/drivers/net/dsa => realtek/files-5.4/drivers/net/dsa/rtl83xx}/rtl838x.h (75%) create mode 100644 target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c create mode 100644 target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl83xx.h create mode 100644 target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/storm.c rename target/linux/{rtl838x => realtek}/files-5.4/drivers/net/ethernet/rtl838x_eth.c (91%) rename target/linux/{rtl838x => realtek}/files-5.4/drivers/net/ethernet/rtl838x_eth.h (98%) rename target/linux/{rtl838x/files-5.4/drivers/net/dsa/rtl838x_phy.c => realtek/files-5.4/drivers/net/phy/rtl83xx-phy.c} (83%) create mode 100644 target/linux/realtek/files-5.4/drivers/net/phy/rtl83xx-phy.h rename target/linux/{rtl838x => realtek}/files/firmware/rtl838x_phy/rtl838x_8214fc.fw (100%) rename target/linux/{rtl838x => realtek}/files/firmware/rtl838x_phy/rtl838x_8218b.fw (100%) rename target/linux/{rtl838x => realtek}/files/firmware/rtl838x_phy/rtl838x_8380.fw (100%) rename target/linux/{rtl838x => realtek}/generic/target.mk (100%) rename target/linux/{rtl838x => realtek}/image/Makefile (84%) rename target/linux/{rtl838x => realtek}/patches-5.4/300-mips-add-rtl838x-platform.patch (60%) rename target/linux/{rtl838x => realtek}/patches-5.4/301-gpio-add-rtl838x-driver.patch (73%) rename target/linux/{rtl838x => realtek}/patches-5.4/400-mtd-add-rtl838x-spi-flash-driver.patch (100%) create mode 100644 target/linux/realtek/patches-5.4/700-net-dsa-add-support-for-rtl838x-switch.patch rename target/linux/{rtl838x => realtek}/patches-5.4/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch (72%) rename target/linux/{rtl838x => realtek}/patches-5.4/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch (100%) rename target/linux/{rtl838x => realtek}/patches-5.4/702-net-ethernet-add-support-for-rtl838x-ethernet.patch (100%) rename target/linux/{rtl838x => realtek}/patches-5.4/703-include-linux-add-phy-ops-for-rtl838x.patch (100%) rename target/linux/{rtl838x => realtek}/patches-5.4/704-drivers-net-phy-eee-support-for-rtl838x.patch (100%) create mode 100644 target/linux/realtek/patches-5.4/705-add-rtl-phy.patch create mode 100644 target/linux/realtek/patches-5.4/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch rename target/linux/{rtl838x => realtek}/profiles/00-default.mk (100%) delete mode 100644 target/linux/rtl838x/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h delete mode 100644 target/linux/rtl838x/files-5.4/arch/mips/rtl838x/irq.c delete mode 100644 target/linux/rtl838x/files-5.4/arch/mips/rtl838x/serial.c delete mode 100644 target/linux/rtl838x/files-5.4/drivers/gpio/gpio-rtl838x.c delete mode 100644 target/linux/rtl838x/files-5.4/drivers/net/dsa/rtl838x_sw.c delete mode 100644 target/linux/rtl838x/patches-5.4/700-net-dsa-add-support-for-rtl838x-switch.patch diff --git a/target/linux/rtl838x/Makefile b/target/linux/realtek/Makefile similarity index 88% rename from target/linux/rtl838x/Makefile rename to target/linux/realtek/Makefile index a4e203718d..98fcaf3968 100644 --- a/target/linux/rtl838x/Makefile +++ b/target/linux/realtek/Makefile @@ -5,7 +5,7 @@ include $(TOPDIR)/rules.mk ARCH:=mips CPU_TYPE:=4kec -BOARD:=rtl838x +BOARD:=realtek BOARDNAME:=Realtek MIPS DEVICE_TYPE:=basic FEATURES:=ramdisk squashfs @@ -14,7 +14,7 @@ SUBTARGETS:=generic KERNEL_PATCHVER:=5.4 define Target/Description - Build firmware images for Realtek RTL838x based boards. + Build firmware images for Realtek RTL83xx based boards. endef include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/rtl838x/base-files/etc/board.d/01_leds b/target/linux/realtek/base-files/etc/board.d/01_leds similarity index 100% rename from target/linux/rtl838x/base-files/etc/board.d/01_leds rename to target/linux/realtek/base-files/etc/board.d/01_leds diff --git a/target/linux/rtl838x/base-files/etc/board.d/02_network b/target/linux/realtek/base-files/etc/board.d/02_network similarity index 90% rename from target/linux/rtl838x/base-files/etc/board.d/02_network rename to target/linux/realtek/base-files/etc/board.d/02_network index d745526d0e..dc1465661b 100755 --- a/target/linux/rtl838x/base-files/etc/board.d/02_network +++ b/target/linux/realtek/base-files/etc/board.d/02_network @@ -11,6 +11,7 @@ rtl838x_setup_switch() for lan in /sys/class/net/lan*; do lan_list="$lan_list $(basename $lan)" done + ucidef_set_bridge_device switch ucidef_set_interface_lan "$lan_list" } @@ -22,7 +23,8 @@ rtl838x_setup_macs() local label_mac case $board in - allnet,all-sg8208m) + allnet,all-sg8208m|\ + netgear,gs110tpp-v1) lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) label_mac=$lan_mac esac diff --git a/target/linux/rtl838x/base-files/etc/inittab b/target/linux/realtek/base-files/etc/inittab similarity index 100% rename from target/linux/rtl838x/base-files/etc/inittab rename to target/linux/realtek/base-files/etc/inittab diff --git a/target/linux/rtl838x/base-files/lib/upgrade/platform.sh b/target/linux/realtek/base-files/lib/upgrade/platform.sh similarity index 100% rename from target/linux/rtl838x/base-files/lib/upgrade/platform.sh rename to target/linux/realtek/base-files/lib/upgrade/platform.sh diff --git a/target/linux/rtl838x/config-5.4 b/target/linux/realtek/config-5.4 similarity index 70% rename from target/linux/rtl838x/config-5.4 rename to target/linux/realtek/config-5.4 index 4d1ba372e6..0d459237c7 100644 --- a/target/linux/rtl838x/config-5.4 +++ b/target/linux/realtek/config-5.4 @@ -1,28 +1,13 @@ CONFIG_ARCH_32BIT_OFF_T=y CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y -CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y -CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y -CONFIG_ARCH_HAS_UNCACHED_SEGMENT=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_MMAP_RND_BITS_MAX=15 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_MEMREMAP_PROT=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y -CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_CEVT_R4K=y -CONFIG_CLKDEV_LOOKUP=y CONFIG_CLONE_BACKWARDS=y CONFIG_COMPAT_32BIT_TIME=y CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15 @@ -51,6 +36,7 @@ CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y CONFIG_DTC=y CONFIG_EARLY_PRINTK=y +CONFIG_EARLY_PRINTK_8250=y CONFIG_EFI_EARLYCON=y CONFIG_ETHERNET_PACKET_MANGLE=y CONFIG_EXTRA_FIRMWARE="rtl838x_phy/rtl838x_8214fc.fw rtl838x_phy/rtl838x_8218b.fw rtl838x_phy/rtl838x_8380.fw" @@ -68,7 +54,6 @@ CONFIG_GENERIC_GETTIMEOFDAY=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_IPI=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_LIB_ASHLDI3=y CONFIG_GENERIC_LIB_ASHRDI3=y @@ -77,10 +62,14 @@ CONFIG_GENERIC_LIB_LSHRDI3=y CONFIG_GENERIC_LIB_UCMPDI2=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y CONFIG_GENERIC_SCHED_CLOCK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GPIOLIB=y +CONFIG_GPIO_RTL8231=y CONFIG_GPIO_RTL838X=y CONFIG_GRO_CELLS=y CONFIG_HANDLE_DOMAIN_IRQ=y @@ -88,41 +77,6 @@ CONFIG_HARDWARE_WATCHPOINTS=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_ARCH_COMPILER_H=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ASM_MODVERSIONS=y -CONFIG_HAVE_CBPF_JIT=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FAST_GUP=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_VDSO=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KVM=y -CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y # CONFIG_HIGH_RES_TIMERS is not set CONFIG_HZ=250 CONFIG_HZ_250=y @@ -130,7 +84,6 @@ CONFIG_HZ_PERIODIC=y CONFIG_INITRAMFS_SOURCE="" CONFIG_IRQCHIP=y CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_MIPS_CPU=y CONFIG_IRQ_WORK=y @@ -155,11 +108,9 @@ CONFIG_MIPS_CLOCK_VSYSCALL=y CONFIG_MIPS_CMDLINE_FROM_DTB=y # CONFIG_MIPS_ELF_APPENDED_DTB is not set CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_NO_APPENDED_DTB is not set CONFIG_MIPS_RAW_APPENDED_DTB=y CONFIG_MIPS_SPRAM=y -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_MODULES_USE_ELF_REL=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_GEOMETRY=y @@ -175,7 +126,7 @@ CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_PER_CPU_KM=y CONFIG_NET_DEVLINK=y CONFIG_NET_DSA=y -CONFIG_NET_DSA_RTL838X=y +CONFIG_NET_DSA_RTL83XX=y CONFIG_NET_DSA_TAG_TRAILER=y CONFIG_NET_RTL838X=y CONFIG_NET_SWITCHDEV=y @@ -196,7 +147,6 @@ CONFIG_PGTABLE_LEVELS=2 CONFIG_PHYLIB=y CONFIG_PHYLINK=y CONFIG_PINCTRL=y -# CONFIG_PINCTRL_SINGLE is not set CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_PSB6970_PHY=y @@ -211,7 +161,6 @@ CONFIG_SPI_MASTER=y CONFIG_SPI_MEM=y CONFIG_SPI_RTL838X=y CONFIG_SRCU=y -CONFIG_SWAP_IO_SPACE=y CONFIG_SWCONFIG=y CONFIG_SWPHY=y CONFIG_SYSCTL_EXCEPTION_TRACE=y @@ -222,11 +171,10 @@ CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_MULTITHREADING=y -CONFIG_SYS_SUPPORTS_VPE_LOADER=y CONFIG_TARGET_ISA_REV=2 CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TINY_SRCU=y +CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y CONFIG_USE_OF=y CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts b/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts new file mode 100644 index 0000000000..1bf175b7bf --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/dts-v1/; + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "netgear,gs110tpp-v1", "realtek,rtl838x-soc"; + model = "Netgear GS110TPP"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + mode { + label = "reset"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x0e0000>; + read-only; + }; + partition@e0000 { + label = "u-boot-env"; + reg = <0x00e0000 0x010000>; + }; + partition@f0000 { + label = "sysinfo"; + reg = <0x00f0000 0x010000>; + read-only; + }; + partition@100000{ + label = "jffs2_cfg"; + reg = <0x0100000 0x100000>; + read-only; + }; + partition@200000{ + label = "jffs2_log"; + reg = <0x0200000 0x100000>; + }; + partition@300000{ + label = "firmware"; + compatible = "netgear,uimage"; + reg = <0x0300000 0x1d00000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + /* Internal phy */ + phy8: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <8>; + }; + phy9: ethernet-phy@9 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <9>; + }; + phy10: ethernet-phy@10 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <10>; + }; + phy11: ethernet-phy@11 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <11>; + }; + phy12: ethernet-phy@12 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <12>; + }; + phy13: ethernet-phy@13 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <13>; + }; + phy14: ethernet-phy@14 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <14>; + }; + phy15: ethernet-phy@15 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <15>; + }; +/* phy10: ethernet-phy@10 { + compatible = "ethernet-phy-ieee802.3-c22"; + phy-is-integrated; + reg = <10>; + }; + phy11: ethernet-phy@11 { + compatible = "ethernet-phy-ieee802.3-c22"; + phy-is-integrated; + reg = <11>; + }; + phy12: ethernet-phy@12 { + compatible = "ethernet-phy-ieee802.3-c22"; + phy-is-integrated; + reg = <12>; + }; + phy13: ethernet-phy@13 { + compatible = "ethernet-phy-ieee802.3-c22"; + phy-is-integrated; + reg = <13>; + };*/ + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@8 { + reg = <8>; + label = "lan1"; + phy-handle = <&phy8>; + phy-mode = "internal"; + }; + port@9 { + reg = <9>; + label = "lan2"; + phy-handle = <&phy9>; + phy-mode = "internal"; + }; + port@10 { + reg = <10>; + label = "lan3"; + phy-handle = <&phy10>; + phy-mode = "internal"; + }; + port@11 { + reg = <11>; + label = "lan4"; + phy-handle = <&phy11>; + phy-mode = "internal"; + }; + port@12 { + reg = <12>; + label = "lan5"; + phy-handle = <&phy12>; + phy-mode = "internal"; + }; + port@13 { + reg = <13>; + label = "lan6"; + phy-handle = <&phy13>; + phy-mode = "internal"; + }; + port@14 { + reg = <14>; + label = "lan7"; + phy-handle = <&phy14>; + phy-mode = "internal"; + }; + port@15 { + reg = <15>; + label = "lan8"; + phy-handle = <&phy15>; + phy-mode = "internal"; + }; +/* port@10 { + reg = <10>; + label = "lan9"; + phy-mode = "internal"; + phy-handle = <&phy10>; + }; + port@11 { + reg = <11>; + label = "lan10"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@12 { + reg = <12>; + label = "lan11"; + phy-mode = "internal"; + phy-handle = <&phy12>; + }; + port@13 { + reg = <13>; + label = "lan12"; + phy-mode = "internal"; + phy-handle = <&phy13>; + };*/ + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/rtl838x/dts/rtl8382_allnet_all-sg8208m.dts b/target/linux/realtek/dts/rtl8382_allnet_all-sg8208m.dts similarity index 100% rename from target/linux/rtl838x/dts/rtl8382_allnet_all-sg8208m.dts rename to target/linux/realtek/dts/rtl8382_allnet_all-sg8208m.dts diff --git a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-10p.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-10p.dts similarity index 100% rename from target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-10p.dts rename to target/linux/realtek/dts/rtl8382_d-link_dgs-1210-10p.dts diff --git a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-16.dts similarity index 100% rename from target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts rename to target/linux/realtek/dts/rtl8382_d-link_dgs-1210-16.dts diff --git a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-28.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28.dts similarity index 100% rename from target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-28.dts rename to target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28.dts diff --git a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210.dtsi b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210.dtsi similarity index 100% rename from target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210.dtsi rename to target/linux/realtek/dts/rtl8382_d-link_dgs-1210.dtsi diff --git a/target/linux/rtl838x/dts/rtl838x.dtsi b/target/linux/realtek/dts/rtl838x.dtsi similarity index 73% rename from target/linux/rtl838x/dts/rtl838x.dtsi rename to target/linux/realtek/dts/rtl838x.dtsi index 37bbcefd44..f48d759a10 100644 --- a/target/linux/rtl838x/dts/rtl838x.dtsi +++ b/target/linux/realtek/dts/rtl838x.dtsi @@ -65,7 +65,14 @@ #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; - compatible = "rtl838x,icu"; + compatible = "mti,cpu-interrupt-controller"; + }; + + intc: rtlintc { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "realtek,rt8380-intc"; reg = <0xb8003000 0x20>; }; @@ -80,7 +87,7 @@ }; uart0: uart@b8002000 { - status = "disabled"; + status = "okay"; compatible = "ns16550a"; reg = <0xb8002000 0x100>; @@ -88,7 +95,7 @@ clock-frequency = <200000000>; interrupt-parent = <&cpuintc>; - interrupts = <31>; + interrupts = <3>; reg-io-width = <1>; reg-shift = <2>; @@ -97,6 +104,9 @@ }; uart1: uart@b8002100 { + pinctrl-names = "default"; + pinctrl-0 = <&enable_uart1>; + status = "okay"; compatible = "ns16550a"; @@ -104,7 +114,7 @@ clock-frequency = <200000000>; - interrupt-parent = <&cpuintc>; + interrupt-parent = <&intc>; interrupts = <30>; reg-io-width = <1>; @@ -118,16 +128,38 @@ reg = <0xb8003500 0x20>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&cpuintc>; + interrupt-parent = <&intc>; interrupts = <23>; }; + gpio1: rtl8231-gpio { + status = "disabled"; + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + indirect-access-bus-id = <0>; + gpio-controller; + }; + + pinmux: pinmux@bb001000 { + compatible = "pinctrl-single"; + reg = <0xbb001000 0x4>; + + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + #pinctrl-cells = <2>; + + enable_uart1: pinmux_enable_uart1 { + pinctrl-single,bits = <0x0 0x10 0x10>; + }; + }; + ethernet0: ethernet@bb00a300 { status = "okay"; compatible = "realtek,rtl838x-eth"; reg = <0xbb00a300 0x100>; - interrupt-parent = <&cpuintc>; + interrupt-parent = <&intc>; interrupts = <24>; #interrupt-cells = <1>; phy-mode = "internal"; @@ -141,6 +173,10 @@ switch0: switch@bb000000 { status = "okay"; - compatible = "realtek,rtl838x-switch"; + interrupt-parent = <&cpuintc>; + interrupts = <4>; + + + compatible = "realtek,rtl83xx-switch"; }; }; diff --git a/target/linux/rtl838x/files-5.4/arch/mips/include/asm/mach-rtl838x/ioremap.h b/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/ioremap.h similarity index 100% rename from target/linux/rtl838x/files-5.4/arch/mips/include/asm/mach-rtl838x/ioremap.h rename to target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/ioremap.h diff --git a/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h b/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h new file mode 100644 index 0000000000..580c3d8d61 --- /dev/null +++ b/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#ifndef _RTL83XX_IRQ_H_ +#define _RTL83XX_IRQ_H_ + +#define NR_IRQS 32 +#include_next + +/* Global Interrupt Mask Register */ +#define RTL83XX_ICTL_GIMR 0x00 +/* Global Interrupt Status Register */ +#define RTL83XX_ICTL_GISR 0x04 + +#define RTL83XX_IRQ_CPU_BASE 0 +#define RTL83XX_IRQ_CPU_NUM 8 +#define RTL83XX_IRQ_ICTL_BASE (RTL83XX_IRQ_CPU_BASE + RTL83XX_IRQ_CPU_NUM) +#define RTL83XX_IRQ_ICTL_NUM 32 + +/* Cascaded interrupts */ +#define RTL83XX_ICTL1_IRQ (RTL83XX_IRQ_CPU_BASE + 2) +#define RTL83XX_ICTL2_IRQ (RTL83XX_IRQ_CPU_BASE + 3) +#define RTL83XX_ICTL3_IRQ (RTL83XX_IRQ_CPU_BASE + 4) +#define RTL83XX_ICTL4_IRQ (RTL83XX_IRQ_CPU_BASE + 5) +#define RTL83XX_ICTL5_IRQ (RTL83XX_IRQ_CPU_BASE + 6) + +/* Interrupt routing register */ +#define RTL83XX_IRR0 0x08 +#define RTL83XX_IRR1 0x0c +#define RTL83XX_IRR2 0x10 +#define RTL83XX_IRR3 0x14 + +/* Cascade map */ +#define UART0_CASCADE 2 +#define UART1_CASCADE 1 +#define TC0_CASCADE 5 +#define TC1_CASCADE 1 +#define OCPTO_CASCADE 1 +#define HLXTO_CASCADE 1 +#define SLXTO_CASCADE 1 +#define NIC_CASCADE 4 +#define GPIO_ABCD_CASCADE 4 +#define GPIO_EFGH_CASCADE 4 +#define RTC_CASCADE 4 +#define SWCORE_CASCADE 3 +#define WDT_IP1_CASCADE 4 +#define WDT_IP2_CASCADE 5 + +/* Pack cascade map into interrupt routing registers */ +#define RTL83XX_IRR0_SETTING (\ + (UART0_CASCADE << 28) | \ + (UART1_CASCADE << 24) | \ + (TC0_CASCADE << 20) | \ + (TC1_CASCADE << 16) | \ + (OCPTO_CASCADE << 12) | \ + (HLXTO_CASCADE << 8) | \ + (SLXTO_CASCADE << 4) | \ + (NIC_CASCADE << 0)) +#define RTL83XX_IRR1_SETTING (\ + (GPIO_ABCD_CASCADE << 28) | \ + (GPIO_EFGH_CASCADE << 24) | \ + (RTC_CASCADE << 20) | \ + (SWCORE_CASCADE << 16)) +#define RTL83XX_IRR2_SETTING 0 +#define RTL83XX_IRR3_SETTING 0 + +#endif /* _RTL83XX_IRQ_H_ */ diff --git a/target/linux/rtl838x/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl838x.h b/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h similarity index 85% rename from target/linux/rtl838x/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl838x.h rename to target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h index 7759c0cac6..b7d2a6f037 100644 --- a/target/linux/rtl838x/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl838x.h +++ b/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h @@ -6,29 +6,30 @@ #ifndef _MACH_RTL838X_H_ #define _MACH_RTL838X_H_ +#include /* * Register access macros */ #define RTL838X_SW_BASE ((volatile void *) 0xBB000000) -#define rtl838x_r32(reg) __raw_readl(reg) -#define rtl838x_w32(val, reg) __raw_writel(val, reg) -#define rtl838x_w32_mask(clear, set, reg) rtl838x_w32((rtl838x_r32(reg) & ~(clear)) | (set), reg) +#define rtl83xx_r32(reg) readl(reg) +#define rtl83xx_w32(val, reg) writel(val, reg) +#define rtl83xx_w32_mask(clear, set, reg) rtl83xx_w32((rtl83xx_r32(reg) & ~(clear)) | (set), reg) -#define rtl838x_r8(reg) __raw_readb(reg) -#define rtl838x_w8(val, reg) __raw_writeb(val, reg) +#define rtl83xx_r8(reg) readb(reg) +#define rtl83xx_w8(val, reg) writeb(val, reg) -#define sw_r32(reg) __raw_readl(RTL838X_SW_BASE + reg) -#define sw_w32(val, reg) __raw_writel(val, RTL838X_SW_BASE + reg) +#define sw_r32(reg) readl(RTL838X_SW_BASE + reg) +#define sw_w32(val, reg) writel(val, RTL838X_SW_BASE + reg) #define sw_w32_mask(clear, set, reg) \ sw_w32((sw_r32(reg) & ~(clear)) | (set), reg) -#define sw_r64(reg) ((((u64)__raw_readl(RTL838X_SW_BASE + reg)) << 32) | \ - __raw_readl(RTL838X_SW_BASE + reg + 4)) +#define sw_r64(reg) ((((u64)readl(RTL838X_SW_BASE + reg)) << 32) | \ + readl(RTL838X_SW_BASE + reg + 4)) #define sw_w64(val, reg) do { \ - __raw_writel((u32)((val) >> 32), RTL838X_SW_BASE + reg); \ - __raw_writel((u32)((val) & 0xffffffff), \ + writel((u32)((val) >> 32), RTL838X_SW_BASE + reg); \ + writel((u32)((val) & 0xffffffff), \ RTL838X_SW_BASE + reg + 4); \ } while (0) @@ -46,6 +47,22 @@ #define RTL838X_IRQ_ICTL_BASE (RTL838X_IRQ_CPU_BASE + RTL838X_IRQ_CPU_NUM) #define RTL838X_IRQ_ICTL_NUM 32 +#define RTL83XX_IRQ_UART0 31 +#define RTL83XX_IRQ_UART1 30 +#define RTL83XX_IRQ_TC0 29 +#define RTL83XX_IRQ_TC1 28 +#define RTL83XX_IRQ_OCPTO 27 +#define RTL83XX_IRQ_HLXTO 26 +#define RTL83XX_IRQ_SLXTO 25 +#define RTL83XX_IRQ_NIC 24 +#define RTL83XX_IRQ_GPIO_ABCD 23 +#define RTL83XX_IRQ_GPIO_EFGH 22 +#define RTL83XX_IRQ_RTC 21 +#define RTL83XX_IRQ_SWCORE 20 +#define RTL83XX_IRQ_WDT_IP1 19 +#define RTL83XX_IRQ_WDT_IP2 18 + + /* * MIPS32R2 counter */ @@ -103,7 +120,6 @@ ) #define IRR1 (0x0c) - #define IRR1_SETTING_RTL838X ((GPIO_ABCD_RS << 28) | \ (GPIO_EFGH_RS << 24) | \ (RTC_RS << 20) | \ @@ -113,7 +129,6 @@ (SWCORE_RS << 16) \ ) - #define IRR2 (0x10) #define IRR2_SETTING 0 @@ -315,16 +330,13 @@ #define RTL839X_MODEL_NAME_INFO (0x0FF0) #define RTL838X_LED_GLB_CTRL (0xA000) #define RTL839X_LED_GLB_CTRL (0x00E4) -#define RTL838X_EXT_GPIO_DIR_0 (0xA08C) -#define RTL838X_EXT_GPIO_DIR_1 (0xA090) -#define RTL838X_EXT_GPIO_DATA_0 (0xA094) -#define RTL838X_EXT_GPIO_DATA_1 (0xA098) +#define RTL838X_EXT_GPIO_DIR (0xA08C) +#define RTL839X_EXT_GPIO_DIR (0x0214) +#define RTL838X_EXT_GPIO_DATA (0xA094) +#define RTL839X_EXT_GPIO_DATA (0x021c) #define RTL838X_EXT_GPIO_INDRT_ACCESS (0xA09C) +#define RTL839X_EXT_GPIO_INDRT_ACCESS (0x0224) #define RTL838X_EXTRA_GPIO_CTRL (0xA0E0) -#define RTL838X_EXTRA_GPIO_DIR_0 (0xA0E4) -#define RTL838X_EXTRA_GPIO_DIR_1 (0xA0E8) -#define RTL838X_EXTRA_GPIO_DATA_0 (0xA0EC) -#define RTL838X_EXTRA_GPIO_DATA_1 (0xA0F0) #define RTL838X_DMY_REG5 (0x0144) #define RTL838X_EXTRA_GPIO_CTRL (0xA0E0) @@ -374,11 +386,18 @@ #define RTL838X_LED_P_EN_CTRL (0xA008) /* LED control by software */ -#define RTL838X_LED_SW_CTRL (0xA00C) +#define RTL838X_LED_SW_CTRL (0x0128) +#define RTL839X_LED_SW_CTRL (0xA00C) +#define RTL838X_LED_SW_P_EN_CTRL (0xA010) +#define RTL839X_LED_SW_P_EN_CTRL (0x012C) #define RTL838X_LED0_SW_P_EN_CTRL (0xA010) +#define RTL839X_LED0_SW_P_EN_CTRL (0x012C) #define RTL838X_LED1_SW_P_EN_CTRL (0xA014) +#define RTL839X_LED1_SW_P_EN_CTRL (0x0130) #define RTL838X_LED2_SW_P_EN_CTRL (0xA018) -#define RTL838X_LED_SW_P_CTRL(p) (0xA01C + ((p) << 2)) +#define RTL839X_LED2_SW_P_EN_CTRL (0x0134) +#define RTL838X_LED_SW_P_CTRL (0xA01C) +#define RTL839X_LED_SW_P_CTRL (0x0144) #define RTL839X_MAC_EFUSE_CTRL (0x02ac) @@ -420,7 +439,7 @@ #define RTL8380_FAMILY_ID (0x8380) #define RTL8330_FAMILY_ID (0x8330) -struct rtl838x_soc_info { +struct rtl83xx_soc_info { unsigned char *name; unsigned int id; unsigned int family; @@ -429,9 +448,11 @@ struct rtl838x_soc_info { volatile void *icu_base; }; -extern struct rtl838x_soc_info soc_info; -extern struct mutex smi_lock; - -void rtl838x_soc_detect(struct rtl838x_soc_info *i); +/* rtl83xx-related functions used across subsystems */ +int rtl838x_smi_wait_op(int timeout); +int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val); +int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val); +int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val); +int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val); #endif /* _MACH_RTL838X_H_ */ diff --git a/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/Makefile b/target/linux/realtek/files-5.4/arch/mips/rtl838x/Makefile similarity index 61% rename from target/linux/rtl838x/files-5.4/arch/mips/rtl838x/Makefile rename to target/linux/realtek/files-5.4/arch/mips/rtl838x/Makefile index fe5e1d96a9..8212dc3f48 100644 --- a/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/Makefile +++ b/target/linux/realtek/files-5.4/arch/mips/rtl838x/Makefile @@ -2,4 +2,4 @@ # Makefile for the rtl838x specific parts of the kernel # -obj-y := serial.o setup.o prom.o irq.o +obj-y := setup.o prom.o irq.o diff --git a/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/Platform b/target/linux/realtek/files-5.4/arch/mips/rtl838x/Platform similarity index 100% rename from target/linux/rtl838x/files-5.4/arch/mips/rtl838x/Platform rename to target/linux/realtek/files-5.4/arch/mips/rtl838x/Platform diff --git a/target/linux/realtek/files-5.4/arch/mips/rtl838x/irq.c b/target/linux/realtek/files-5.4/arch/mips/rtl838x/irq.c new file mode 100644 index 0000000000..9057d48543 --- /dev/null +++ b/target/linux/realtek/files-5.4/arch/mips/rtl838x/irq.c @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Realtek RTL83XX architecture specific IRQ handling + * + * based on the original BSP + * Copyright (C) 2006-2012 Tony Wu (tonywu@realtek.com) + * Copyright (C) 2020 B. Koblitz + * Copyright (C) 2020 Bert Vermeulen + * Copyright (C) 2020 John Crispin + */ + +#include +#include +#include +#include +#include +#include + +#include +#include "irq.h" + +#define REALTEK_CPU_IRQ_SHARED0 (MIPS_CPU_IRQ_BASE + 2) +#define REALTEK_CPU_IRQ_UART (MIPS_CPU_IRQ_BASE + 3) +#define REALTEK_CPU_IRQ_SWITCH (MIPS_CPU_IRQ_BASE + 4) +#define REALTEK_CPU_IRQ_SHARED1 (MIPS_CPU_IRQ_BASE + 5) +#define REALTEK_CPU_IRQ_EXTERNAL (MIPS_CPU_IRQ_BASE + 6) +#define REALTEK_CPU_IRQ_COUNTER (MIPS_CPU_IRQ_BASE + 7) + +#define REG(x) (rtl83xx_ictl_base + x) + +extern struct rtl83xx_soc_info soc_info; + +static DEFINE_RAW_SPINLOCK(irq_lock); +static void __iomem *rtl83xx_ictl_base; + +static void rtl83xx_ictl_enable_irq(struct irq_data *i) +{ + unsigned long flags; + u32 value; + + raw_spin_lock_irqsave(&irq_lock, flags); + + value = rtl83xx_r32(REG(RTL83XX_ICTL_GIMR)); + value |= BIT(i->hwirq); + rtl83xx_w32(value, REG(RTL83XX_ICTL_GIMR)); + + raw_spin_unlock_irqrestore(&irq_lock, flags); +} + +static void rtl83xx_ictl_disable_irq(struct irq_data *i) +{ + unsigned long flags; + u32 value; + + raw_spin_lock_irqsave(&irq_lock, flags); + + value = rtl83xx_r32(REG(RTL83XX_ICTL_GIMR)); + value &= ~BIT(i->hwirq); + rtl83xx_w32(value, REG(RTL83XX_ICTL_GIMR)); + + raw_spin_unlock_irqrestore(&irq_lock, flags); +} + +static struct irq_chip rtl83xx_ictl_irq = { + .name = "RTL83xx", + .irq_enable = rtl83xx_ictl_enable_irq, + .irq_disable = rtl83xx_ictl_disable_irq, + .irq_ack = rtl83xx_ictl_disable_irq, + .irq_mask = rtl83xx_ictl_disable_irq, + .irq_unmask = rtl83xx_ictl_enable_irq, + .irq_eoi = rtl83xx_ictl_enable_irq, +}; + +static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) +{ + irq_set_chip_and_handler(hw, &rtl83xx_ictl_irq, handle_level_irq); + + return 0; +} + +static const struct irq_domain_ops irq_domain_ops = { + .map = intc_map, + .xlate = irq_domain_xlate_onecell, +}; + +static void rtl838x_irq_dispatch(struct irq_desc *desc) +{ + unsigned int pending = rtl83xx_r32(REG(RTL83XX_ICTL_GIMR)) & rtl83xx_r32(REG(RTL83XX_ICTL_GISR)); + + if (pending) { + struct irq_domain *domain = irq_desc_get_handler_data(desc); + generic_handle_irq(irq_find_mapping(domain, __ffs(pending))); + } else { + spurious_interrupt(); + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending; + + pending = read_c0_cause() & read_c0_status() & ST0_IM; + + if (pending & CAUSEF_IP7) + do_IRQ(REALTEK_CPU_IRQ_COUNTER); + + else if (pending & CAUSEF_IP6) + do_IRQ(REALTEK_CPU_IRQ_EXTERNAL); + + else if (pending & CAUSEF_IP5) + do_IRQ(REALTEK_CPU_IRQ_SHARED1); + + else if (pending & CAUSEF_IP4) + do_IRQ(REALTEK_CPU_IRQ_SWITCH); + + else if (pending & CAUSEF_IP3) + do_IRQ(REALTEK_CPU_IRQ_UART); + + else if (pending & CAUSEF_IP2) + do_IRQ(REALTEK_CPU_IRQ_SHARED0); + + else + spurious_interrupt(); +} + +static void __init icu_of_init(struct device_node *node, struct device_node *parent) +{ + struct irq_domain *domain; + + domain = irq_domain_add_simple(node, 32, 0, + &irq_domain_ops, NULL); + irq_set_chained_handler_and_data(2, rtl838x_irq_dispatch, domain); + irq_set_chained_handler_and_data(5, rtl838x_irq_dispatch, domain); + + rtl83xx_ictl_base = of_iomap(node, 0); + if (!rtl83xx_ictl_base) + return; + + /* Disable all cascaded interrupts */ + rtl83xx_w32(0, REG(RTL83XX_ICTL_GIMR)); + + /* Set up interrupt routing */ + rtl83xx_w32(RTL83XX_IRR0_SETTING, REG(RTL83XX_IRR0)); + rtl83xx_w32(RTL83XX_IRR1_SETTING, REG(RTL83XX_IRR1)); + rtl83xx_w32(RTL83XX_IRR2_SETTING, REG(RTL83XX_IRR2)); + rtl83xx_w32(RTL83XX_IRR3_SETTING, REG(RTL83XX_IRR3)); + + /* Clear timer interrupt */ + write_c0_compare(0); + + /* Enable all CPU interrupts */ + write_c0_status(read_c0_status() | ST0_IM); + + /* Enable timer0 and uart0 interrupts */ + rtl83xx_w32(BIT(RTL83XX_IRQ_TC0) | BIT(RTL83XX_IRQ_UART0), REG(RTL83XX_ICTL_GIMR)); +} + +static struct of_device_id __initdata of_irq_ids[] = { + { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init }, + { .compatible = "realtek,rt8380-intc", .data = icu_of_init }, + {}, +}; + +void __init arch_init_irq(void) +{ + of_irq_init(of_irq_ids); +} diff --git a/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/prom.c b/target/linux/realtek/files-5.4/arch/mips/rtl838x/prom.c similarity index 67% rename from target/linux/rtl838x/files-5.4/arch/mips/rtl838x/prom.c rename to target/linux/realtek/files-5.4/arch/mips/rtl838x/prom.c index 81507e235b..5278afae03 100644 --- a/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/prom.c +++ b/target/linux/realtek/files-5.4/arch/mips/rtl838x/prom.c @@ -19,59 +19,19 @@ #include #include -#include +#include extern char arcs_cmdline[]; -const void *fdt; extern const char __appended_dtb; -void prom_console_init(void) -{ - /* UART 16550A is initialized by the bootloader */ -} - -#ifdef CONFIG_EARLY_PRINTK -#define rtl838x_r8(reg) __raw_readb(reg) -#define rtl838x_w8(val, reg) __raw_writeb(val, reg) - -void unregister_prom_console(void) -{ - -} - -void disable_early_printk(void) -{ - -} - -void prom_putchar(char c) -{ - unsigned int retry = 0; - - do { - if (retry++ >= 30000) { - /* Reset Tx FIFO */ - rtl838x_w8(TXRST | CHAR_TRIGGER_14, UART0_FCR); - return; - } - } while ((rtl838x_r8(UART0_LSR) & LSR_THRE) == TxCHAR_AVAIL); - - /* Send Character */ - rtl838x_w8(c, UART0_THR); -} - -char prom_getchar(void) -{ - return '\0'; -} -#endif +struct rtl83xx_soc_info soc_info; +const void *fdt; const char *get_system_type(void) { return soc_info.name; } - void __init prom_free_prom_memory(void) { @@ -79,7 +39,6 @@ void __init prom_free_prom_memory(void) void __init device_tree_init(void) { - pr_info("%s called\r\n", __func__); if (!fdt_check_header(&__appended_dtb)) { fdt = &__appended_dtb; pr_info("Using appended Device Tree.\n"); @@ -107,24 +66,19 @@ static void __init prom_init_cmdline(void) pr_info("Kernel command line: %s\n", arcs_cmdline); } -/* Do basic initialization */ void __init prom_init(void) { uint32_t model; - pr_info("%s called\n", __func__); - soc_info.sw_base = RTL838X_SW_BASE; + /* uart0 */ + setup_8250_early_printk_port(0xb8002000, 2, 0); - model = sw_r32(RTL838X_MODEL_NAME_INFO); - pr_info("RTL838X model is %x\n", model); - model = model >> 16 & 0xFFFF; + soc_info.sw_base = RTL838X_SW_BASE; - if ((model != 0x8328) && (model != 0x8330) && (model != 0x8332) - && (model != 0x8380) && (model != 0x8382)) { - model = sw_r32(RTL839X_MODEL_NAME_INFO); - pr_info("RTL839X model is %x\n", model); - model = model >> 16 & 0xFFFF; - } + model = sw_r32(RTL838X_MODEL_NAME_INFO) >> 16; + if (model != 0x8328 && model != 0x8330 && model != 0x8332 && + model != 0x8380 && model != 0x8382) + model = sw_r32(RTL839X_MODEL_NAME_INFO) >> 16; soc_info.id = model; diff --git a/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/setup.c b/target/linux/realtek/files-5.4/arch/mips/rtl838x/setup.c similarity index 61% rename from target/linux/rtl838x/files-5.4/arch/mips/rtl838x/setup.c rename to target/linux/realtek/files-5.4/arch/mips/rtl838x/setup.c index d1ccbcee10..dbabb0354b 100644 --- a/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/setup.c +++ b/target/linux/realtek/files-5.4/arch/mips/rtl838x/setup.c @@ -25,17 +25,10 @@ #include #include -#include "mach-rtl838x.h" +#include "mach-rtl83xx.h" extern int rtl838x_serial_init(void); -struct rtl838x_soc_info soc_info; - -struct clk { - struct clk_lookup cl; - unsigned long rate; -}; - -struct clk cpu_clk; +extern struct rtl83xx_soc_info soc_info; u32 pll_reset_value; @@ -69,38 +62,16 @@ static void rtl838x_restart(char *command) static void rtl838x_halt(void) { pr_info("System halted.\n"); - while - (1); -} - -static void __init rtl838x_setup(void) -{ - unsigned int val; - - pr_info("Registering _machine_restart\n"); - _machine_restart = rtl838x_restart; - _machine_halt = rtl838x_halt; - - val = rtl838x_r32((volatile void *)0xBB0040000); - if (val == 3) - pr_info("PCI device found\n"); - else - pr_info("NO PCI device found\n"); - - /* Setup System LED. Bit 15 (14 for RTL8390) then allows to toggle it */ - if (soc_info.family == RTL8380_FAMILY_ID) - sw_w32_mask(0, 3 << 16, RTL838X_LED_GLB_CTRL); - else - sw_w32_mask(0, 3 << 15, RTL839X_LED_GLB_CTRL); + while(1); } void __init plat_mem_setup(void) { void *dtb; - pr_info("%s called\n", __func__); - set_io_port_base(KSEG1); + _machine_restart = rtl838x_restart; + _machine_halt = rtl838x_halt; if (fw_passed_dtb) /* UHI interface */ dtb = (void *)fw_passed_dtb; @@ -114,52 +85,12 @@ void __init plat_mem_setup(void) * parsed resulting in our memory appearing */ __dt_setup_arch(dtb); - - rtl838x_setup(); } - -/* - * Linux clock API - */ -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL_GPL(clk_enable); - -void clk_disable(struct clk *clk) -{ - -} -EXPORT_SYMBOL_GPL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (!clk) - return 0; - - return clk->rate; -} -EXPORT_SYMBOL_GPL(clk_get_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - return -1; -} -EXPORT_SYMBOL_GPL(clk_set_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - return -1; -} -EXPORT_SYMBOL_GPL(clk_round_rate); - void __init plat_time_init(void) { - u32 freq = 500000000; struct device_node *np; - struct clk *clk = &cpu_clk; + u32 freq = 500000000; np = of_find_node_by_name(NULL, "cpus"); if (!np) { @@ -172,17 +103,7 @@ void __init plat_time_init(void) of_node_put(np); } - clk->rate = freq; - - if (IS_ERR(clk)) - panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); - - pr_info("CPU Clock: %ld MHz\n", clk->rate / 1000000); mips_hpt_frequency = freq / 2; pll_reset_value = sw_r32(RTL838X_PLL_CML_CTRL); - pr_info("PLL control register: %x\n", pll_reset_value); - - /* With the info from the command line and cpu-freq we can setup the console */ - rtl838x_serial_init(); } diff --git a/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl8231.c b/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl8231.c new file mode 100644 index 0000000000..be5efc2997 --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl8231.c @@ -0,0 +1,321 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include +#include +#include +#include + +/* RTL8231 registers for LED control */ +#define RTL8231_LED_FUNC0 0x0000 +#define RTL8231_GPIO_PIN_SEL(gpio) ((0x0002) + ((gpio) >> 4)) +#define RTL8231_GPIO_DIR(gpio) ((0x0005) + ((gpio) >> 4)) +#define RTL8231_GPIO_DATA(gpio) ((0x001C) + ((gpio) >> 4)) + +struct rtl8231_gpios { + struct gpio_chip gc; + struct device *dev; + u32 id; + int smi_bus_id; + u16 reg_shadow[0x20]; + u32 reg_cached; + int ext_gpio_indrt_access; +}; + +extern struct mutex smi_lock; +extern struct rtl83xx_soc_info soc_info; + +static u32 rtl8231_read(struct rtl8231_gpios *gpios, u32 reg) +{ + u32 t = 0; + u8 bus_id = gpios->smi_bus_id; + + reg &= 0x1f; + bus_id &= 0x1f; + + /* Calculate read register address */ + t = (bus_id << 2) | (reg << 7); + + /* Set execution bit: cleared when operation completed */ + t |= 1; + sw_w32(t, gpios->ext_gpio_indrt_access); + do { /* TODO: Return 0x80000000 if timeout */ + t = sw_r32(gpios->ext_gpio_indrt_access); + } while (t & 1); + pr_debug("%s: %x, %x, %x\n", __func__, bus_id, reg, (t & 0xffff0000) >> 16); + + return (t & 0xffff0000) >> 16; +} + +static int rtl8231_write(struct rtl8231_gpios *gpios, u32 reg, u32 data) +{ + u32 t = 0; + u8 bus_id = gpios->smi_bus_id; + + pr_debug("%s: %x, %x, %x\n", __func__, bus_id, reg, data); + reg &= 0x1f; + bus_id &= 0x1f; + + t = (bus_id << 2) | (reg << 7) | (data << 16); + /* Set write bit */ + t |= 2; + + /* Set execution bit: cleared when operation completed */ + t |= 1; + sw_w32(t, gpios->ext_gpio_indrt_access); + do { /* TODO: Return -1 if timeout */ + t = sw_r32(gpios->ext_gpio_indrt_access); + } while (t & 1); + + return 0; +} + +static u32 rtl8231_read_cached(struct rtl8231_gpios *gpios, u32 reg) +{ + if (reg > 0x1f) + return 0; + + if (gpios->reg_cached & (1 << reg)) + return gpios->reg_shadow[reg]; + + return rtl8231_read(gpios, reg); +} + +/* Set Direction of the RTL8231 pin: + * dir 1: input + * dir 0: output + */ +static int rtl8231_pin_dir(struct rtl8231_gpios *gpios, u32 gpio, u32 dir) +{ + u32 v; + int pin_sel_addr = RTL8231_GPIO_PIN_SEL(gpio); + int pin_dir_addr = RTL8231_GPIO_DIR(gpio); + int pin = gpio % 16; + int dpin = pin; + + if (gpio > 31) { + pr_info("WARNING: HIGH pin\n"); + dpin = pin << 5; + pin_dir_addr = pin_sel_addr; + } + + v = rtl8231_read_cached(gpios, pin_dir_addr); + if (v & 0x80000000) { + pr_err("Error reading RTL8231\n"); + return -1; + } + + v = (v & ~(1 << dpin)) | (dir << dpin); + rtl8231_write(gpios, pin_dir_addr, v); + gpios->reg_shadow[pin_dir_addr] = v; + gpios->reg_cached |= 1 << pin_dir_addr; + return 0; +} + +static int rtl8231_pin_dir_get(struct rtl8231_gpios *gpios, u32 gpio, u32 *dir) +{ + /* dir 1: input + * dir 0: output + */ + + u32 v; + int pin_dir_addr = RTL8231_GPIO_DIR(gpio); + int pin = gpio % 16; + + if (gpio > 31) { + pin_dir_addr = RTL8231_GPIO_PIN_SEL(gpio); + pin = pin << 5; + } + + v = rtl8231_read(gpios, pin_dir_addr); + if (v & (1 << pin)) + *dir = 1; + else + *dir = 0; + return 0; +} + +static int rtl8231_pin_set(struct rtl8231_gpios *gpios, u32 gpio, u32 data) +{ + u32 v = rtl8231_read(gpios, RTL8231_GPIO_DATA(gpio)); + + pr_debug("%s: %d to %d\n", __func__, gpio, data); + if (v & 0x80000000) { + pr_err("Error reading RTL8231\n"); + return -1; + } + v = (v & ~(1 << (gpio % 16))) | (data << (gpio % 16)); + rtl8231_write(gpios, RTL8231_GPIO_DATA(gpio), v); + gpios->reg_shadow[RTL8231_GPIO_DATA(gpio)] = v; + gpios->reg_cached |= 1 << RTL8231_GPIO_DATA(gpio); + return 0; +} + +static int rtl8231_pin_get(struct rtl8231_gpios *gpios, u32 gpio, u16 *state) +{ + u32 v = rtl8231_read(gpios, RTL8231_GPIO_DATA(gpio)); + + if (v & 0x80000000) { + pr_err("Error reading RTL8231\n"); + return -1; + } + + *state = v & 0xffff; + return 0; +} + +static int rtl8231_direction_input(struct gpio_chip *gc, unsigned int offset) +{ + int err; + struct rtl8231_gpios *gpios = gpiochip_get_data(gc); + + pr_debug("%s: %d\n", __func__, offset); + mutex_lock(&smi_lock); + err = rtl8231_pin_dir(gpios, offset, 1); + mutex_unlock(&smi_lock); + return err; +} + +static int rtl8231_direction_output(struct gpio_chip *gc, unsigned int offset, int value) +{ + int err; + struct rtl8231_gpios *gpios = gpiochip_get_data(gc); + + pr_debug("%s: %d\n", __func__, offset); + mutex_lock(&smi_lock); + err = rtl8231_pin_dir(gpios, offset, 0); + mutex_unlock(&smi_lock); + if (!err) + err = rtl8231_pin_set(gpios, offset, value); + return err; +} + +static int rtl8231_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + u32 v = 0; + struct rtl8231_gpios *gpios = gpiochip_get_data(gc); + + pr_debug("%s: %d\n", __func__, offset); + mutex_lock(&smi_lock); + rtl8231_pin_dir_get(gpios, offset, &v); + mutex_unlock(&smi_lock); + return v; +} + +static int rtl8231_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + u16 state = 0; + struct rtl8231_gpios *gpios = gpiochip_get_data(gc); + + mutex_lock(&smi_lock); + rtl8231_pin_get(gpios, offset, &state); + mutex_unlock(&smi_lock); + if (state & (1 << (offset % 16))) + return 1; + return 0; +} + +void rtl8231_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +{ + struct rtl8231_gpios *gpios = gpiochip_get_data(gc); + + rtl8231_pin_set(gpios, offset, value); +} + +int rtl8231_init(struct rtl8231_gpios *gpios) +{ + pr_info("%s called, MDIO bus ID: %d\n", __func__, gpios->smi_bus_id); + + if (soc_info.family == RTL8390_FAMILY_ID) { + sw_w32_mask(0x7 << 18, 0x4 << 18, RTL839X_LED_GLB_CTRL); + return 0; + } + + /* Enable RTL8231 indirect access mode */ + sw_w32_mask(0, 1, RTL838X_EXTRA_GPIO_CTRL); + sw_w32_mask(3, 1, RTL838X_DMY_REG5); + + /* Enable RTL8231 via GPIO_A1 line + rtl838x_w32_mask(0, 1 << RTL838X_GPIO_A1, RTL838X_GPIO_PABC_DIR); + rtl838x_w32_mask(0, 1 << RTL838X_GPIO_A1, RTL838X_GPIO_PABC_DATA); */ + mdelay(50); /* wait 50ms for reset */ + + /*Select GPIO functionality for pins 0-15, 16-31 and 32-37 */ + rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(0), 0xffff); + rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(16), 0xffff); + + gpios->reg_cached = 0; + + return 0; +} + +static const struct of_device_id rtl8231_gpio_of_match[] = { + { .compatible = "realtek,rtl8231-gpio" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, rtl8231_gpio_of_match); + +static int rtl8231_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct rtl8231_gpios *gpios; + int err; + u8 indirect_bus_id; + + pr_info("Probing RTL8231 GPIOs\n"); + + if (!np) { + dev_err(&pdev->dev, "No DT found\n"); + return -EINVAL; + } + + gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL); + if (!gpios) + return -ENOMEM; + + gpios->id = soc_info.id; + if (soc_info.family == RTL8380_FAMILY_ID) { + gpios->ext_gpio_indrt_access = RTL838X_EXT_GPIO_INDRT_ACCESS; + } + + if (soc_info.family == RTL8390_FAMILY_ID) { + gpios->ext_gpio_indrt_access = RTL839X_EXT_GPIO_INDRT_ACCESS; + } + + if (!of_property_read_u8(np, "indirect-access-bus-id", &indirect_bus_id)) { + gpios->smi_bus_id = indirect_bus_id; + rtl8231_init(gpios); + } + + gpios->dev = dev; + gpios->gc.base = 160; + gpios->gc.ngpio = 36; + gpios->gc.label = "rtl8231"; + gpios->gc.parent = dev; + gpios->gc.owner = THIS_MODULE; + gpios->gc.can_sleep = true; + + gpios->gc.direction_input = rtl8231_direction_input; + gpios->gc.direction_output = rtl8231_direction_output; + gpios->gc.set = rtl8231_gpio_set; + gpios->gc.get = rtl8231_gpio_get; + gpios->gc.get_direction = rtl8231_get_direction; + + err = devm_gpiochip_add_data(dev, &gpios->gc, gpios); + return err; +} + +static struct platform_driver rtl8231_gpio_driver = { + .driver = { + .name = "rtl8231-gpio", + .of_match_table = rtl8231_gpio_of_match, + }, + .probe = rtl8231_gpio_probe, +}; + +module_platform_driver(rtl8231_gpio_driver); + +MODULE_DESCRIPTION("Realtek RTL8231 GPIO expansion chip support"); +MODULE_LICENSE("GPL v2"); diff --git a/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl838x.c b/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl838x.c new file mode 100644 index 0000000000..92cf5f765a --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl838x.c @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include +#include +#include +#include + +/* RTL8231 registers for LED control */ +#define RTL8231_LED_FUNC0 0x0000 +#define RTL8231_GPIO_PIN_SEL(gpio) ((0x0002) + ((gpio) >> 4)) +#define RTL8231_GPIO_DIR(gpio) ((0x0005) + ((gpio) >> 4)) +#define RTL8231_GPIO_DATA(gpio) ((0x001C) + ((gpio) >> 4)) + +struct rtl838x_gpios { + struct gpio_chip gc; + u32 id; + struct device *dev; + int irq; + int num_leds; + int min_led; + int leds_per_port; + u32 led_mode; + int led_glb_ctrl; + int led_sw_ctrl; + int (*led_sw_p_ctrl)(int port); + int (*led_sw_p_en_ctrl)(int port); + int (*ext_gpio_dir)(int i); + int (*ext_gpio_data)(int i); +}; + +inline int rtl838x_ext_gpio_dir(int i) +{ + return RTL838X_EXT_GPIO_DIR + ((i >>5) << 2); +} + +inline int rtl839x_ext_gpio_dir(int i) +{ + return RTL839X_EXT_GPIO_DIR + ((i >>5) << 2); +} + +inline int rtl838x_ext_gpio_data(int i) +{ + return RTL838X_EXT_GPIO_DATA + ((i >>5) << 2); +} + +inline int rtl839x_ext_gpio_data(int i) +{ + return RTL839X_EXT_GPIO_DATA + ((i >>5) << 2); +} + +inline int rtl838x_led_sw_p_ctrl(int p) +{ + return RTL838X_LED_SW_P_CTRL + (p << 2); +} + +inline int rtl839x_led_sw_p_ctrl(int p) +{ + return RTL839X_LED_SW_P_CTRL + (p << 2); +} + +inline int rtl838x_led_sw_p_en_ctrl(int p) +{ + return RTL838X_LED_SW_P_EN_CTRL + ((p / 10) << 2); +} + +inline int rtl839x_led_sw_p_en_ctrl(int p) +{ + return RTL839X_LED_SW_P_EN_CTRL + ((p / 10) << 2); +} + +extern struct mutex smi_lock; +extern struct rtl83xx_soc_info soc_info; + + +void rtl838x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +{ + int bit; + struct rtl838x_gpios *gpios = gpiochip_get_data(gc); + + pr_debug("rtl838x_set: %d, value: %d\n", offset, value); + /* Internal GPIO of the RTL8380 */ + if (offset < 32) { + if (value) + rtl83xx_w32_mask(0, BIT(offset), RTL838X_GPIO_PABC_DATA); + else + rtl83xx_w32_mask(BIT(offset), 0, RTL838X_GPIO_PABC_DATA); + } + + /* LED driver for PWR and SYS */ + if (offset >= 32 && offset < 64) { + bit = offset - 32; + if (value) + sw_w32_mask(0, BIT(bit), gpios->led_glb_ctrl); + else + sw_w32_mask(BIT(bit), 0, gpios->led_glb_ctrl); + return; + } + + bit = (offset - 64) % 32; + /* First Port-LED */ + if (offset >= 64 && offset < 96 + && offset >= (64 + gpios->min_led) + && offset < (64 + gpios->min_led + gpios->num_leds)) { + if (value) + sw_w32_mask(7, 5, gpios->led_sw_p_ctrl(bit)); + else + sw_w32_mask(7, 0, gpios->led_sw_p_ctrl(bit)); + } + if (offset >= 96 && offset < 128 + && offset >= (96 + gpios->min_led) + && offset < (96 + gpios->min_led + gpios->num_leds)) { + if (value) + sw_w32_mask(7 << 3, 5 << 3, gpios->led_sw_p_ctrl(bit)); + else + sw_w32_mask(7 << 3, 0, gpios->led_sw_p_ctrl(bit)); + } + if (offset >= 128 && offset < 160 + && offset >= (128 + gpios->min_led) + && offset < (128 + gpios->min_led + gpios->num_leds)) { + if (value) + sw_w32_mask(7 << 6, 5 << 6, gpios->led_sw_p_ctrl(bit)); + else + sw_w32_mask(7 << 6, 0, gpios->led_sw_p_ctrl(bit)); + } + __asm__ volatile ("sync"); +} + +static int rtl838x_direction_input(struct gpio_chip *gc, unsigned int offset) +{ + pr_debug("%s: %d\n", __func__, offset); + + if (offset < 32) { + rtl83xx_w32_mask(BIT(offset), 0, RTL838X_GPIO_PABC_DIR); + return 0; + } + + /* Internal LED driver does not support input */ + return -ENOTSUPP; +} + +static int rtl838x_direction_output(struct gpio_chip *gc, unsigned int offset, int value) +{ + pr_debug("%s: %d\n", __func__, offset); + if (offset < 32) + rtl83xx_w32_mask(0, BIT(offset), RTL838X_GPIO_PABC_DIR); + rtl838x_gpio_set(gc, offset, value); + + /* LED for PWR and SYS driver is direction output by default */ + return 0; +} + +static int rtl838x_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + u32 v = 0; + + pr_debug("%s: %d\n", __func__, offset); + if (offset < 32) { + v = rtl83xx_r32(RTL838X_GPIO_PABC_DIR); + if (v & BIT(offset)) + return 0; + return 1; + } + + /* LED driver for PWR and SYS is direction output by default */ + if (offset >= 32 && offset < 64) + return 0; + + return 0; +} + +static int rtl838x_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + u32 v; + struct rtl838x_gpios *gpios = gpiochip_get_data(gc); + + pr_debug("%s: %d\n", __func__, offset); + + /* Internal GPIO of the RTL8380 */ + if (offset < 32) { + v = rtl83xx_r32(RTL838X_GPIO_PABC_DATA); + if (v & BIT(offset)) + return 1; + return 0; + } + + /* LED driver for PWR and SYS */ + if (offset >= 32 && offset < 64) { + v = sw_r32(gpios->led_glb_ctrl); + if (v & BIT(offset-32)) + return 1; + return 0; + } + +/* BUG: + bit = (offset - 64) % 32; + if (offset >= 64 && offset < 96) { + if (sw_r32(RTL838X_LED1_SW_P_EN_CTRL) & BIT(bit)) + return 1; + return 0; + } + if (offset >= 96 && offset < 128) { + if (sw_r32(RTL838X_LED1_SW_P_EN_CTRL) & BIT(bit)) + return 1; + return 0; + } + if (offset >= 128 && offset < 160) { + if (sw_r32(RTL838X_LED1_SW_P_EN_CTRL) & BIT(bit)) + return 1; + return 0; + } + */ + return 0; +} + +void rtl8380_led_test(struct rtl838x_gpios *gpios, u32 mask) +{ + int i; + u32 led_gbl = sw_r32(gpios->led_glb_ctrl); + u32 mode_sel, led_p_en; + + if (soc_info.family == RTL8380_FAMILY_ID) { + mode_sel = sw_r32(RTL838X_LED_MODE_SEL); + led_p_en = sw_r32(RTL838X_LED_P_EN_CTRL); + } + + /* 2 Leds for ports 0-23 and 24-27, 3 would be 0x7 */ + sw_w32_mask(0x3f, 0x3 | (0x3 << 3), gpios->led_glb_ctrl); + + if(soc_info.family == RTL8380_FAMILY_ID) { + /* Enable all leds */ + sw_w32(0xFFFFFFF, RTL838X_LED_P_EN_CTRL); + } + /* Enable software control of all leds */ + sw_w32(0xFFFFFFF, gpios->led_sw_ctrl); + sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(0)); + sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(10)); + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(20)); + + for (i = 0; i < 28; i++) { + if (mask & BIT(i)) + sw_w32(5 | (5 << 3) | (5 << 6), gpios->led_sw_p_ctrl(i)); + } + msleep(3000); + + if (soc_info.family == RTL8380_FAMILY_ID) + sw_w32(led_p_en, RTL838X_LED_P_EN_CTRL); + /* Disable software control of all leds */ + sw_w32(0x0000000, gpios->led_sw_ctrl); + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(0)); + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(10)); + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(20)); + + sw_w32(led_gbl, gpios->led_glb_ctrl); + if (soc_info.family == RTL8380_FAMILY_ID) + sw_w32(mode_sel, RTL838X_LED_MODE_SEL); +} + +void take_port_leds(struct rtl838x_gpios *gpios) +{ + int leds_per_port = gpios->leds_per_port; + int mode = gpios->led_mode; + + pr_info("%s, %d, %x\n", __func__, leds_per_port, mode); + pr_debug("Bootloader settings: %x %x %x\n", + sw_r32(gpios->led_sw_p_en_ctrl(0)), + sw_r32(gpios->led_sw_p_en_ctrl(10)), + sw_r32(gpios->led_sw_p_en_ctrl(20)) + ); + + if (soc_info.family == RTL8380_FAMILY_ID) { + pr_debug("led glb: %x, sel %x\n", + sw_r32(gpios->led_glb_ctrl), sw_r32(RTL838X_LED_MODE_SEL)); + pr_debug("RTL838X_LED_P_EN_CTRL: %x", sw_r32(RTL838X_LED_P_EN_CTRL)); + pr_debug("RTL838X_LED_MODE_CTRL: %x", sw_r32(RTL838X_LED_MODE_CTRL)); + sw_w32_mask(3, 0, RTL838X_LED_MODE_SEL); + sw_w32(mode, RTL838X_LED_MODE_CTRL); + } + + /* Enable software control of all leds */ + sw_w32(0xFFFFFFF, gpios->led_sw_ctrl); + if (soc_info.family == RTL8380_FAMILY_ID) + sw_w32(0xFFFFFFF, RTL838X_LED_P_EN_CTRL); + + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(0)); + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(10)); + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(20)); + + sw_w32_mask(0x3f, 0, gpios->led_glb_ctrl); + switch (leds_per_port) { + case 3: + sw_w32_mask(0, 0x7 | (0x7 << 3), gpios->led_glb_ctrl); + sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(20)); + /* FALLTHRU */ + case 2: + sw_w32_mask(0, 0x3 | (0x3 << 3), gpios->led_glb_ctrl); + sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(10)); + /* FALLTHRU */ + case 1: + sw_w32_mask(0, 0x1 | (0x1 << 3), gpios->led_glb_ctrl); + sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(0)); + break; + default: + pr_err("No LEDS configured for software control\n"); + } +} + +static const struct of_device_id rtl838x_gpio_of_match[] = { + { .compatible = "realtek,rtl838x-gpio" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, rtl838x_gpio_of_match); + +static int rtl838x_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct rtl838x_gpios *gpios; + int err; + + pr_info("Probing RTL838X GPIOs\n"); + + if (!np) { + dev_err(&pdev->dev, "No DT found\n"); + return -EINVAL; + } + + gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL); + if (!gpios) + return -ENOMEM; + + gpios->id = soc_info.id; + + switch (gpios->id) { + case 0x8332: + pr_debug("Found RTL8332M GPIO\n"); + break; + case 0x8380: + pr_debug("Found RTL8380M GPIO\n"); + break; + case 0x8381: + pr_debug("Found RTL8381M GPIO\n"); + break; + case 0x8382: + pr_debug("Found RTL8382M GPIO\n"); + break; + case 0x8391: + pr_debug("Found RTL8391 GPIO\n"); + break; + case 0x8393: + pr_debug("Found RTL8393 GPIO\n"); + break; + default: + pr_err("Unknown GPIO chip id (%04x)\n", gpios->id); + return -ENODEV; + } + + if (soc_info.family == RTL8380_FAMILY_ID) { + gpios->led_glb_ctrl = gpios->led_glb_ctrl; + gpios->led_sw_ctrl = RTL838X_LED_SW_CTRL; + gpios->led_sw_p_ctrl = rtl838x_led_sw_p_ctrl; + gpios->led_sw_p_en_ctrl = rtl838x_led_sw_p_en_ctrl; + gpios->ext_gpio_dir = rtl838x_ext_gpio_dir; + gpios->ext_gpio_data = rtl838x_ext_gpio_data; + } + + if (soc_info.family == RTL8390_FAMILY_ID) { + gpios->led_glb_ctrl = RTL839X_LED_GLB_CTRL; + gpios->led_sw_ctrl = RTL839X_LED_SW_CTRL; + gpios->led_sw_p_ctrl = rtl839x_led_sw_p_ctrl; + gpios->led_sw_p_en_ctrl = rtl839x_led_sw_p_en_ctrl; + gpios->ext_gpio_dir = rtl839x_ext_gpio_dir; + gpios->ext_gpio_data = rtl839x_ext_gpio_data; + } + + gpios->dev = dev; + gpios->gc.base = 0; + /* 0-31: internal + * 32-63, LED control register + * 64-95: PORT-LED 0 + * 96-127: PORT-LED 1 + * 128-159: PORT-LED 2 + */ + gpios->gc.ngpio = 160; + gpios->gc.label = "rtl838x"; + gpios->gc.parent = dev; + gpios->gc.owner = THIS_MODULE; + gpios->gc.can_sleep = true; + gpios->irq = 31; + + gpios->gc.direction_input = rtl838x_direction_input; + gpios->gc.direction_output = rtl838x_direction_output; + gpios->gc.set = rtl838x_gpio_set; + gpios->gc.get = rtl838x_gpio_get; + gpios->gc.get_direction = rtl838x_get_direction; + + if (of_property_read_bool(np, "take-port-leds")) { + if (of_property_read_u32(np, "leds-per-port", &gpios->leds_per_port)) + gpios->leds_per_port = 2; + if (of_property_read_u32(np, "led-mode", &gpios->led_mode)) + gpios->led_mode = (0x1ea << 15) | 0x1ea; + if (of_property_read_u32(np, "num-leds", &gpios->num_leds)) + gpios->num_leds = 32; + if (of_property_read_u32(np, "min-led", &gpios->min_led)) + gpios->min_led = 0; + take_port_leds(gpios); + } + + err = devm_gpiochip_add_data(dev, &gpios->gc, gpios); + return err; +} + +static struct platform_driver rtl838x_gpio_driver = { + .driver = { + .name = "rtl838x-gpio", + .of_match_table = rtl838x_gpio_of_match, + }, + .probe = rtl838x_gpio_probe, +}; + +module_platform_driver(rtl838x_gpio_driver); + +MODULE_DESCRIPTION("Realtek RTL838X GPIO API support"); +MODULE_LICENSE("GPL v2"); diff --git a/target/linux/rtl838x/files-5.4/drivers/mtd/spi-nor/rtl838x-nor.c b/target/linux/realtek/files-5.4/drivers/mtd/spi-nor/rtl838x-nor.c similarity index 99% rename from target/linux/rtl838x/files-5.4/drivers/mtd/spi-nor/rtl838x-nor.c rename to target/linux/realtek/files-5.4/drivers/mtd/spi-nor/rtl838x-nor.c index b72f08d2fd..35bf53ea5a 100644 --- a/target/linux/rtl838x/files-5.4/drivers/mtd/spi-nor/rtl838x-nor.c +++ b/target/linux/realtek/files-5.4/drivers/mtd/spi-nor/rtl838x-nor.c @@ -13,7 +13,9 @@ #include #include "rtl838x-spi.h" -#include +#include + +extern struct rtl83xx_soc_info soc_info; struct rtl838x_nor { struct spi_nor nor; diff --git a/target/linux/rtl838x/files-5.4/drivers/mtd/spi-nor/rtl838x-spi.h b/target/linux/realtek/files-5.4/drivers/mtd/spi-nor/rtl838x-spi.h similarity index 95% rename from target/linux/rtl838x/files-5.4/drivers/mtd/spi-nor/rtl838x-spi.h rename to target/linux/realtek/files-5.4/drivers/mtd/spi-nor/rtl838x-spi.h index 1209d47b02..de424c647a 100644 --- a/target/linux/rtl838x/files-5.4/drivers/mtd/spi-nor/rtl838x-spi.h +++ b/target/linux/realtek/files-5.4/drivers/mtd/spi-nor/rtl838x-spi.h @@ -22,8 +22,8 @@ * Register access macros */ -#define spi_r32(reg) __raw_readl(rtl838x_nor->base + reg) -#define spi_w32(val, reg) __raw_writel(val, rtl838x_nor->base + reg) +#define spi_r32(reg) readl(rtl838x_nor->base + reg) +#define spi_w32(val, reg) writel(val, rtl838x_nor->base + reg) #define spi_w32_mask(clear, set, reg) \ spi_w32((spi_r32(reg) & ~(clear)) | (set), reg) @@ -31,7 +31,7 @@ } while (!(spi_r32(SFCSR) & SFCSR_SPI_RDY)) #define spi_w32w(val, reg) do { \ - __raw_writel(val, rtl838x_nor->base + reg); \ + writel(val, rtl838x_nor->base + reg); \ SPI_WAIT_READY; \ } while (0) diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/Kconfig b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/Kconfig new file mode 100644 index 0000000000..f293832eb5 --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/Kconfig @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-only +config NET_DSA_RTL83XX + tristate "Realtek RTL838x/RTL839x switch support" + depends on RTL838X + select NET_DSA_TAG_TRAILER + ---help--- + This driver adds support for Realtek RTL83xx series switching. + diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/Makefile b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/Makefile new file mode 100644 index 0000000000..52cc151a56 --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_NET_DSA_RTL83XX) += common.o dsa.o \ + rtl838x.o rtl839x.o storm.o debugfs.o diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c new file mode 100644 index 0000000000..1b57ddc92c --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c @@ -0,0 +1,407 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include + +#include +#include "rtl83xx.h" + +extern struct rtl83xx_soc_info soc_info; + +extern const struct rtl838x_reg rtl838x_reg; +extern const struct rtl838x_reg rtl839x_reg; +extern const struct dsa_switch_ops rtl83xx_switch_ops; + +DEFINE_MUTEX(smi_lock); + + +// TODO: unused +static void dump_fdb(struct rtl838x_switch_priv *priv) +{ + struct rtl838x_l2_entry e; + int i; + + mutex_lock(&priv->reg_mutex); + + for (i = 0; i < priv->fib_entries; i++) { + priv->r->read_l2_entry_using_hash(i >> 2, i & 0x3, &e); + + if (!e.valid) /* Check for invalid entry */ + continue; + + pr_debug("-> port %02d: mac %pM, vid: %d, rvid: %d, MC: %d, %d\n", + e.port, &e.mac[0], e.vid, e.rvid, e.is_ip_mc, e.is_ipv6_mc); + } + + mutex_unlock(&priv->reg_mutex); +} + +// TODO: unused +static void rtl83xx_port_get_stp_state(struct rtl838x_switch_priv *priv, int port) +{ + u32 cmd, msti = 0; + u32 port_state[4]; + int index, bit, i; + int pos = port; + int n = priv->family_id == RTL8380_FAMILY_ID ? 2 : 4; + + /* CPU PORT can only be configured on RTL838x */ + if (port >= priv->cpu_port || port > 51) + return; + + mutex_lock(&priv->reg_mutex); + + /* For the RTL839x, the bits are left-aligned in the 128 bit field */ + if (priv->family_id == RTL8390_FAMILY_ID) + pos += 12; + + index = n - (pos >> 4) - 1; + bit = (pos << 1) % 32; + + if (priv->family_id == RTL8380_FAMILY_ID) { + cmd = BIT(15) /* Execute cmd */ + | BIT(14) /* Read */ + | 2 << 12 /* Table type 0b10 */ + | (msti & 0xfff); + } else { + cmd = BIT(16) /* Execute cmd */ + | 0 << 15 /* Read */ + | 5 << 12 /* Table type 0b101 */ + | (msti & 0xfff); + } + priv->r->exec_tbl0_cmd(cmd); + + for (i = 0; i < n; i++) + port_state[i] = sw_r32(priv->r->tbl_access_data_0(i)); + + mutex_unlock(&priv->reg_mutex); +} + +int rtl83xx_dsa_phy_read(struct dsa_switch *ds, int phy_addr, int phy_reg) +{ + u32 val; + u32 offset = 0; + struct rtl838x_switch_priv *priv = ds->priv; + + if (phy_addr >= 24 && phy_addr <= 27 + && priv->ports[24].phy == PHY_RTL838X_SDS) { + if (phy_addr == 26) + offset = 0x100; + val = sw_r32(MAPLE_SDS4_FIB_REG0r + offset + (phy_reg << 2)) & 0xffff; + return val; + } + + if (soc_info.family == RTL8390_FAMILY_ID) + rtl839x_read_phy(phy_addr, 0, phy_reg, &val); + else + rtl838x_read_phy(phy_addr, 0, phy_reg, &val); + return val; +} + +int rtl83xx_dsa_phy_write(struct dsa_switch *ds, int phy_addr, int phy_reg, u16 val) +{ + u32 offset = 0; + struct rtl838x_switch_priv *priv = ds->priv; + + if (phy_addr >= 24 && phy_addr <= 27 + && priv->ports[24].phy == PHY_RTL838X_SDS) { + if (phy_addr == 26) + offset = 0x100; + sw_w32(val, MAPLE_SDS4_FIB_REG0r + offset + (phy_reg << 2)); + return 0; + } + if (soc_info.family == RTL8390_FAMILY_ID) + return rtl839x_write_phy(phy_addr, 0, phy_reg, val); + else + return rtl838x_write_phy(phy_addr, 0, phy_reg, val); +} + +static int rtl83xx_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + int ret; + struct rtl838x_switch_priv *priv = bus->priv; + + ret = rtl83xx_dsa_phy_read(priv->ds, addr, regnum); + return ret; +} + +static int rtl83xx_mdio_write(struct mii_bus *bus, int addr, int regnum, + u16 val) +{ + struct rtl838x_switch_priv *priv = bus->priv; + + return rtl83xx_dsa_phy_write(priv->ds, addr, regnum, val); +} + +static void rtl8380_sds_rst(int mac) +{ + u32 offset = (mac == 24) ? 0 : 0x100; + + sw_w32_mask(1 << 11, 0, RTL8380_SDS4_FIB_REG0 + offset); + sw_w32_mask(0x3, 0, RTL838X_SDS4_REG28 + offset); + sw_w32_mask(0x3, 0x3, RTL838X_SDS4_REG28 + offset); + sw_w32_mask(0, 0x1 << 6, RTL838X_SDS4_DUMMY0 + offset); + sw_w32_mask(0x1 << 6, 0, RTL838X_SDS4_DUMMY0 + offset); + pr_debug("SERDES reset: %d\n", mac); +} + +static int __init rtl8380_sds_power(int mac, int val) +{ + u32 mode = (val == 1) ? 0x4 : 0x9; + u32 offset = (mac == 24) ? 5 : 0; + + if ((mac != 24) && (mac != 26)) { + pr_err("%s: not a fibre port: %d\n", __func__, mac); + return -1; + } + + sw_w32_mask(0x1f << offset, mode << offset, RTL838X_SDS_MODE_SEL); + + rtl8380_sds_rst(mac); + + return 0; +} + +static int __init rtl83xx_mdio_probe(struct rtl838x_switch_priv *priv) +{ + struct device *dev = priv->dev; + struct device_node *dn, *mii_np = dev->of_node; + struct mii_bus *bus; + int ret; + u32 pn; + + pr_debug("In %s\n", __func__); + mii_np = of_find_compatible_node(NULL, NULL, "realtek,rtl838x-mdio"); + if (mii_np) { + pr_debug("Found compatible MDIO node!\n"); + } else { + dev_err(priv->dev, "no %s child node found", "mdio-bus"); + return -ENODEV; + } + + priv->mii_bus = of_mdio_find_bus(mii_np); + if (!priv->mii_bus) { + pr_debug("Deferring probe of mdio bus\n"); + return -EPROBE_DEFER; + } + if (!of_device_is_available(mii_np)) + ret = -ENODEV; + + bus = devm_mdiobus_alloc(priv->ds->dev); + if (!bus) + return -ENOMEM; + + bus->name = "rtl838x slave mii"; + bus->read = &rtl83xx_mdio_read; + bus->write = &rtl83xx_mdio_write; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", bus->name, dev->id); + bus->parent = dev; + priv->ds->slave_mii_bus = bus; + priv->ds->slave_mii_bus->priv = priv; + + ret = mdiobus_register(priv->ds->slave_mii_bus); + if (ret && mii_np) { + of_node_put(dn); + return ret; + } + + dn = mii_np; + for_each_node_by_name(dn, "ethernet-phy") { + if (of_property_read_u32(dn, "reg", &pn)) + continue; + + priv->ports[pn].dp = dsa_to_port(priv->ds, pn); + + // Check for the integrated SerDes of the RTL8380M first + if (of_property_read_bool(dn, "phy-is-integrated") + && priv->id == 0x8380 && pn >= 24) { + pr_debug("----> FÓUND A SERDES\n"); + priv->ports[pn].phy = PHY_RTL838X_SDS; + continue; + } + + if (of_property_read_bool(dn, "phy-is-integrated") + && !of_property_read_bool(dn, "sfp")) { + priv->ports[pn].phy = PHY_RTL8218B_INT; + continue; + } + + if (!of_property_read_bool(dn, "phy-is-integrated") + && of_property_read_bool(dn, "sfp")) { + priv->ports[pn].phy = PHY_RTL8214FC; + continue; + } + + if (!of_property_read_bool(dn, "phy-is-integrated") + && !of_property_read_bool(dn, "sfp")) { + priv->ports[pn].phy = PHY_RTL8218B_EXT; + continue; + } + } + + /* Disable MAC polling the PHY so that we can start configuration */ + priv->r->set_port_reg_le(0ULL, priv->r->smi_poll_ctrl); + + /* Enable PHY control via SoC */ + if (priv->family_id == RTL8380_FAMILY_ID) { + /* Enable PHY control via SoC */ + sw_w32_mask(0, BIT(15), RTL838X_SMI_GLB_CTRL); + } else { + /* Disable PHY polling via SoC */ + sw_w32_mask(BIT(7), 0, RTL839X_SMI_GLB_CTRL); + } + + /* Power on fibre ports and reset them if necessary */ + if (priv->ports[24].phy == PHY_RTL838X_SDS) { + pr_debug("Powering on fibre ports & reset\n"); + rtl8380_sds_power(24, 1); + rtl8380_sds_power(26, 1); + } + + pr_debug("%s done\n", __func__); + return 0; +} + +static int __init rtl83xx_get_l2aging(struct rtl838x_switch_priv *priv) +{ + int t = sw_r32(priv->r->l2_ctrl_1); + + t &= priv->family_id == RTL8380_FAMILY_ID ? 0x7fffff : 0x1FFFFF; + + if (priv->family_id == RTL8380_FAMILY_ID) + t = t * 128 / 625; /* Aging time in seconds. 0: L2 aging disabled */ + else + t = (t * 3) / 5; + + pr_debug("L2 AGING time: %d sec\n", t); + pr_debug("Dynamic aging for ports: %x\n", sw_r32(priv->r->l2_port_aging_out)); + return t; +} + +static int __init rtl83xx_sw_probe(struct platform_device *pdev) +{ + int err = 0, i; + struct rtl838x_switch_priv *priv; + struct device *dev = &pdev->dev; + u64 irq_mask; + + pr_debug("Probing RTL838X switch device\n"); + if (!pdev->dev.of_node) { + dev_err(dev, "No DT found\n"); + return -EINVAL; + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->ds = dsa_switch_alloc(dev, DSA_MAX_PORTS); + + if (!priv->ds) + return -ENOMEM; + priv->ds->dev = dev; + priv->ds->priv = priv; + priv->ds->ops = &rtl83xx_switch_ops; + priv->dev = dev; + + priv->family_id = soc_info.family; + priv->id = soc_info.id; + if (soc_info.family == RTL8380_FAMILY_ID) { + priv->cpu_port = RTL838X_CPU_PORT; + priv->port_mask = 0x1f; + priv->r = &rtl838x_reg; + priv->ds->num_ports = 30; + priv->fib_entries = 8192; + rtl8380_get_version(priv); + } else { + priv->cpu_port = RTL839X_CPU_PORT; + priv->port_mask = 0x3f; + priv->r = &rtl839x_reg; + priv->ds->num_ports = 53; + priv->fib_entries = 16384; + rtl8390_get_version(priv); + } + pr_debug("Chip version %c\n", priv->version); + + err = rtl83xx_mdio_probe(priv); + if (err) { + /* Probing fails the 1st time because of missing ethernet driver + * initialization. Use this to disable traffic in case the bootloader left if on + */ + return err; + } + err = dsa_register_switch(priv->ds); + if (err) { + dev_err(dev, "Error registering switch: %d\n", err); + return err; + } + + /* Enable link and media change interrupts. Are the SERDES masks needed? */ + sw_w32_mask(0, 3, priv->r->isr_glb_src); + /* ... for all ports */ + irq_mask = soc_info.family == RTL8380_FAMILY_ID ? 0x0FFFFFFF : 0xFFFFFFFFFFFFFULL; + priv->r->set_port_reg_le(irq_mask, priv->r->isr_port_link_sts_chg); + priv->r->set_port_reg_le(irq_mask, priv->r->imr_port_link_sts_chg); + + priv->link_state_irq = platform_get_irq(pdev, 0);; + if (priv->family_id == RTL8380_FAMILY_ID) { + err = request_irq(priv->link_state_irq, rtl838x_switch_irq, + IRQF_SHARED, "rtl838x-link-state", priv->ds); + } else { + err = request_irq(priv->link_state_irq, rtl839x_switch_irq, + IRQF_SHARED, "rtl839x-link-state", priv->ds); + } + if (err) { + dev_err(dev, "Error setting up switch interrupt.\n"); + /* Need to free allocated switch here */ + } + + /* Enable interrupts for switch */ + sw_w32(0x1, priv->r->imr_glb); + + rtl83xx_get_l2aging(priv); + +/* + if (priv->family_id == RTL8380_FAMILY_ID) + rtl83xx_storm_control_init(priv); +*/ + + /* Clear all destination ports for mirror groups */ + for (i = 0; i < 4; i++) + priv->mirror_group_ports[i] = -1; + + rtl838x_dbgfs_init(priv); + + return err; +} + +static int rtl83xx_sw_remove(struct platform_device *pdev) +{ + // TODO: + pr_debug("Removing platform driver for rtl83xx-sw\n"); + return 0; +} + +static const struct of_device_id rtl83xx_switch_of_ids[] = { + { .compatible = "realtek,rtl83xx-switch"}, + { /* sentinel */ } +}; + + +MODULE_DEVICE_TABLE(of, rtl83xx_switch_of_ids); + +static struct platform_driver rtl83xx_switch_driver = { + .probe = rtl83xx_sw_probe, + .remove = rtl83xx_sw_remove, + .driver = { + .name = "rtl83xx-switch", + .pm = NULL, + .of_match_table = rtl83xx_switch_of_ids, + }, +}; + +module_platform_driver(rtl83xx_switch_driver); + +MODULE_AUTHOR("B. Koblitz"); +MODULE_DESCRIPTION("RTL83XX SoC Switch Driver"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/debugfs.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/debugfs.c new file mode 100644 index 0000000000..af24e8fa42 --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/debugfs.c @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include + +#include +#include "rtl838x.h" + +#define RTL838X_DRIVER_NAME "rtl838x" + +static const struct debugfs_reg32 port_ctrl_regs[] = { + { .name = "port_isolation", .offset = RTL838X_PORT_ISO_CTRL(0), }, + { .name = "mac_force_mode", .offset = RTL838X_MAC_FORCE_MODE_CTRL, }, +}; + +void rtl838x_dbgfs_cleanup(struct rtl838x_switch_priv *priv) +{ + debugfs_remove_recursive(priv->dbgfs_dir); + +// kfree(priv->dbgfs_entries); +} + +static int rtl838x_dbgfs_port_init(struct dentry *parent, struct rtl838x_switch_priv *priv, + int port) +{ + struct dentry *port_dir; + struct debugfs_regset32 *port_ctrl_regset; + + port_dir = debugfs_create_dir(priv->ports[port].dp->name, parent); + + debugfs_create_x32("rate_uc", 0644, port_dir, + (u32 *)(RTL838X_SW_BASE + RTL838X_STORM_CTRL_PORT_UC(port))); + + debugfs_create_x32("rate_mc", 0644, port_dir, + (u32 *)(RTL838X_SW_BASE + RTL838X_STORM_CTRL_PORT_BC(port))); + + debugfs_create_x32("rate_bc", 0644, port_dir, + (u32 *)(RTL838X_SW_BASE + RTL838X_STORM_CTRL_PORT_BC(port))); + + debugfs_create_u32("id", 0444, port_dir, &priv->ports[port].dp->index); + + + debugfs_create_x32("vlan_port_tag_sts_ctrl", 0644, port_dir, + (u32 *)(RTL838X_SW_BASE + RTL838X_VLAN_PORT_TAG_STS_CTRL(port))); + + port_ctrl_regset = devm_kzalloc(priv->dev, sizeof(*port_ctrl_regset), GFP_KERNEL); + if (!port_ctrl_regset) + return -ENOMEM; + + port_ctrl_regset->regs = port_ctrl_regs; + port_ctrl_regset->nregs = ARRAY_SIZE(port_ctrl_regs); + port_ctrl_regset->base = RTL838X_SW_BASE + (port << 2); + debugfs_create_regset32("port_ctrl", 0400, port_dir, port_ctrl_regset); + + return 0; +} + +void rtl838x_dbgfs_init(struct rtl838x_switch_priv *priv) +{ + struct dentry *rtl838x_dir; + struct dentry *port_dir; + struct debugfs_regset32 *port_ctrl_regset; + int ret, i; + + rtl838x_dir = debugfs_lookup(RTL838X_DRIVER_NAME, NULL); + if (!rtl838x_dir) + rtl838x_dir = debugfs_create_dir(RTL838X_DRIVER_NAME, NULL); + + priv->dbgfs_dir = rtl838x_dir; + + debugfs_create_u32("soc", 0444, rtl838x_dir, + (u32 *)(RTL838X_SW_BASE + RTL838X_MODEL_NAME_INFO)); + + /* Create one directory per port */ + for (i = 0; i < priv->cpu_port; i++) { + if (priv->ports[i].phy) { + pr_debug("debugfs, port %d\n", i); + ret = rtl838x_dbgfs_port_init(rtl838x_dir, priv, i); + if (ret) + goto err; + } + } + + /* Create directory for CPU-port */ + port_dir = debugfs_create_dir("cpu_port", rtl838x_dir); port_ctrl_regset = devm_kzalloc(priv->dev, sizeof(*port_ctrl_regset), GFP_KERNEL); + if (!port_ctrl_regset) { + ret = -ENOMEM; + goto err; + } + + port_ctrl_regset->regs = port_ctrl_regs; + port_ctrl_regset->nregs = ARRAY_SIZE(port_ctrl_regs); + port_ctrl_regset->base = RTL838X_SW_BASE + (priv->cpu_port << 2); + debugfs_create_regset32("port_ctrl", 0400, port_dir, port_ctrl_regset); + debugfs_create_u8("id", 0444, port_dir, &priv->cpu_port); + + return; +err: + rtl838x_dbgfs_cleanup(priv); +} diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c new file mode 100644 index 0000000000..a0717e1d9a --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c @@ -0,0 +1,1170 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include + +#include +#include "rtl83xx.h" + + +extern struct rtl83xx_soc_info soc_info; + + +static void rtl83xx_print_matrix(void) +{ + unsigned volatile int *ptr8; + volatile u64 *ptr9; + int i; + + if (soc_info.family == RTL8380_FAMILY_ID) { + ptr8 = RTL838X_SW_BASE + RTL838X_PORT_ISO_CTRL(0); + for (i = 0; i < 28; i += 8) + pr_debug("> %8x %8x %8x %8x %8x %8x %8x %8x\n", + ptr8[i + 0], ptr8[i + 1], ptr8[i + 2], ptr8[i + 3], + ptr8[i + 4], ptr8[i + 5], ptr8[i + 6], ptr8[i + 7]); + pr_debug("CPU_PORT> %8x\n", ptr8[28]); + } else { + ptr9 = RTL838X_SW_BASE + RTL839X_PORT_ISO_CTRL(0); + for (i = 0; i < 52; i += 4) + pr_debug("> %16llx %16llx %16llx %16llx\n", + ptr9[i + 0], ptr9[i + 1], ptr9[i + 2], ptr9[i + 3]); + pr_debug("CPU_PORT> %16llx\n", ptr9[52]); + } + +} + +static void rtl83xx_init_stats(struct rtl838x_switch_priv *priv) +{ + mutex_lock(&priv->reg_mutex); + + /* Enable statistics module: all counters plus debug. + * On RTL839x all counters are enabled by default + */ + if (priv->family_id == RTL8380_FAMILY_ID) + sw_w32_mask(0, 3, RTL838X_STAT_CTRL); + + /* Reset statistics counters */ + sw_w32_mask(0, 1, priv->r->stat_rst); + + mutex_unlock(&priv->reg_mutex); +} + +static void rtl83xx_write_cam(int idx, u32 *r) +{ + u32 cmd = BIT(16) /* Execute cmd */ + | BIT(15) /* Read */ + | BIT(13) /* Table type 0b01 */ + | (idx & 0x3f); + + sw_w32(r[0], RTL838X_TBL_ACCESS_L2_DATA(0)); + sw_w32(r[1], RTL838X_TBL_ACCESS_L2_DATA(1)); + sw_w32(r[2], RTL838X_TBL_ACCESS_L2_DATA(2)); + + sw_w32(cmd, RTL838X_TBL_ACCESS_L2_CTRL); + do { } while (sw_r32(RTL838X_TBL_ACCESS_L2_CTRL) & BIT(16)); +} + +static u64 rtl83xx_hash_key(struct rtl838x_switch_priv *priv, u64 mac, u32 vid) +{ + if (priv->family_id == RTL8380_FAMILY_ID) + return rtl838x_hash(priv, mac << 12 | vid); + else + return rtl839x_hash(priv, mac << 12 | vid); +} + +static void rtl83xx_write_hash(int idx, u32 *r) +{ + u32 cmd = BIT(16) /* Execute cmd */ + | 0 << 15 /* Write */ + | 0 << 13 /* Table type 0b00 */ + | (idx & 0x1fff); + + sw_w32(0, RTL838X_TBL_ACCESS_L2_DATA(0)); + sw_w32(0, RTL838X_TBL_ACCESS_L2_DATA(1)); + sw_w32(0, RTL838X_TBL_ACCESS_L2_DATA(2)); + sw_w32(cmd, RTL838X_TBL_ACCESS_L2_CTRL); + do { } while (sw_r32(RTL838X_TBL_ACCESS_L2_CTRL) & BIT(16)); +} + +static void rtl83xx_enable_phy_polling(struct rtl838x_switch_priv *priv) +{ + int i; + u64 v = 0; + + msleep(1000); + /* Enable all ports with a PHY, including the SFP-ports */ + for (i = 0; i < priv->cpu_port; i++) { + if (priv->ports[i].phy) + v |= BIT(i); + } + + pr_debug("%s: %16llx\n", __func__, v); + priv->r->set_port_reg_le(v, priv->r->smi_poll_ctrl); + + /* PHY update complete */ + if (priv->family_id == RTL8390_FAMILY_ID) + sw_w32_mask(0, BIT(7), RTL839X_SMI_GLB_CTRL); + else + sw_w32_mask(0, 0x8000, RTL838X_SMI_GLB_CTRL); +} + +const struct rtl83xx_mib_desc rtl83xx_mib[] = { + MIB_DESC(2, 0xf8, "ifInOctets"), + MIB_DESC(2, 0xf0, "ifOutOctets"), + MIB_DESC(1, 0xec, "dot1dTpPortInDiscards"), + MIB_DESC(1, 0xe8, "ifInUcastPkts"), + MIB_DESC(1, 0xe4, "ifInMulticastPkts"), + MIB_DESC(1, 0xe0, "ifInBroadcastPkts"), + MIB_DESC(1, 0xdc, "ifOutUcastPkts"), + MIB_DESC(1, 0xd8, "ifOutMulticastPkts"), + MIB_DESC(1, 0xd4, "ifOutBroadcastPkts"), + MIB_DESC(1, 0xd0, "ifOutDiscards"), + MIB_DESC(1, 0xcc, ".3SingleCollisionFrames"), + MIB_DESC(1, 0xc8, ".3MultipleCollisionFrames"), + MIB_DESC(1, 0xc4, ".3DeferredTransmissions"), + MIB_DESC(1, 0xc0, ".3LateCollisions"), + MIB_DESC(1, 0xbc, ".3ExcessiveCollisions"), + MIB_DESC(1, 0xb8, ".3SymbolErrors"), + MIB_DESC(1, 0xb4, ".3ControlInUnknownOpcodes"), + MIB_DESC(1, 0xb0, ".3InPauseFrames"), + MIB_DESC(1, 0xac, ".3OutPauseFrames"), + MIB_DESC(1, 0xa8, "DropEvents"), + MIB_DESC(1, 0xa4, "tx_BroadcastPkts"), + MIB_DESC(1, 0xa0, "tx_MulticastPkts"), + MIB_DESC(1, 0x9c, "CRCAlignErrors"), + MIB_DESC(1, 0x98, "tx_UndersizePkts"), + MIB_DESC(1, 0x94, "rx_UndersizePkts"), + MIB_DESC(1, 0x90, "rx_UndersizedropPkts"), + MIB_DESC(1, 0x8c, "tx_OversizePkts"), + MIB_DESC(1, 0x88, "rx_OversizePkts"), + MIB_DESC(1, 0x84, "Fragments"), + MIB_DESC(1, 0x80, "Jabbers"), + MIB_DESC(1, 0x7c, "Collisions"), + MIB_DESC(1, 0x78, "tx_Pkts64Octets"), + MIB_DESC(1, 0x74, "rx_Pkts64Octets"), + MIB_DESC(1, 0x70, "tx_Pkts65to127Octets"), + MIB_DESC(1, 0x6c, "rx_Pkts65to127Octets"), + MIB_DESC(1, 0x68, "tx_Pkts128to255Octets"), + MIB_DESC(1, 0x64, "rx_Pkts128to255Octets"), + MIB_DESC(1, 0x60, "tx_Pkts256to511Octets"), + MIB_DESC(1, 0x5c, "rx_Pkts256to511Octets"), + MIB_DESC(1, 0x58, "tx_Pkts512to1023Octets"), + MIB_DESC(1, 0x54, "rx_Pkts512to1023Octets"), + MIB_DESC(1, 0x50, "tx_Pkts1024to1518Octets"), + MIB_DESC(1, 0x4c, "rx_StatsPkts1024to1518Octets"), + MIB_DESC(1, 0x48, "tx_Pkts1519toMaxOctets"), + MIB_DESC(1, 0x44, "rx_Pkts1519toMaxOctets"), + MIB_DESC(1, 0x40, "rxMacDiscards") +}; + + +/* DSA callbacks */ + + +static enum dsa_tag_protocol rtl83xx_get_tag_protocol(struct dsa_switch *ds, int port) +{ + /* The switch does not tag the frames, instead internally the header + * structure for each packet is tagged accordingly. + */ + return DSA_TAG_PROTO_TRAILER; +} + +static int rtl83xx_setup(struct dsa_switch *ds) +{ + int i; + struct rtl838x_switch_priv *priv = ds->priv; + u64 port_bitmap = BIT_ULL(priv->cpu_port); + + pr_debug("%s called\n", __func__); + + /* Disable MAC polling the PHY so that we can start configuration */ + priv->r->set_port_reg_le(0ULL, priv->r->smi_poll_ctrl); + + for (i = 0; i < ds->num_ports; i++) + priv->ports[i].enable = false; + priv->ports[priv->cpu_port].enable = true; + + /* Isolate ports from each other: traffic only CPU <-> port */ + /* Setting bit j in register RTL838X_PORT_ISO_CTRL(i) allows + * traffic from source port i to destination port j + */ + for (i = 0; i < priv->cpu_port; i++) { + if (priv->ports[i].phy) { + priv->r->set_port_reg_be(BIT_ULL(priv->cpu_port) | BIT(i), + priv->r->port_iso_ctrl(i)); + port_bitmap |= BIT_ULL(i); + } + } + priv->r->set_port_reg_be(port_bitmap, priv->r->port_iso_ctrl(priv->cpu_port)); + + rtl83xx_print_matrix(); + + rtl83xx_init_stats(priv); + + ds->configure_vlan_while_not_filtering = true; + + /* Enable MAC Polling PHY again */ + rtl83xx_enable_phy_polling(priv); + pr_debug("Please wait until PHY is settled\n"); + msleep(1000); + return 0; +} + +static void rtl83xx_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +{ + struct rtl838x_switch_priv *priv = ds->priv; + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + + pr_debug("In %s port %d", __func__, port); + + if (!phy_interface_mode_is_rgmii(state->interface) && + state->interface != PHY_INTERFACE_MODE_1000BASEX && + state->interface != PHY_INTERFACE_MODE_MII && + state->interface != PHY_INTERFACE_MODE_REVMII && + state->interface != PHY_INTERFACE_MODE_GMII && + state->interface != PHY_INTERFACE_MODE_QSGMII && + state->interface != PHY_INTERFACE_MODE_INTERNAL && + state->interface != PHY_INTERFACE_MODE_SGMII) { + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + dev_err(ds->dev, + "Unsupported interface: %d for port %d\n", + state->interface, port); + return; + } + + /* Allow all the expected bits */ + phylink_set(mask, Autoneg); + phylink_set_port_modes(mask); + phylink_set(mask, Pause); + phylink_set(mask, Asym_Pause); + + /* With the exclusion of MII and Reverse MII, we support Gigabit, + * including Half duplex + */ + if (state->interface != PHY_INTERFACE_MODE_MII && + state->interface != PHY_INTERFACE_MODE_REVMII) { + phylink_set(mask, 1000baseT_Full); + phylink_set(mask, 1000baseT_Half); + } + + /* On both the 8380 and 8382, ports 24-27 are SFP ports */ + if (port >= 24 && port <= 27 && priv->family_id == RTL8380_FAMILY_ID) + phylink_set(mask, 1000baseX_Full); + + phylink_set(mask, 10baseT_Half); + phylink_set(mask, 10baseT_Full); + phylink_set(mask, 100baseT_Half); + phylink_set(mask, 100baseT_Full); + + bitmap_and(supported, supported, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); + bitmap_and(state->advertising, state->advertising, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); +} + +static int rtl83xx_phylink_mac_link_state(struct dsa_switch *ds, int port, + struct phylink_link_state *state) +{ + struct rtl838x_switch_priv *priv = ds->priv; + u64 speed; + + if (port < 0 || port > priv->cpu_port) + return -EINVAL; + + state->link = 0; + if (priv->r->get_port_reg_le(priv->r->mac_link_sts) & BIT_ULL(port)) + state->link = 1; + state->duplex = 0; + if (priv->r->get_port_reg_le(priv->r->mac_link_dup_sts) & BIT_ULL(port)) + state->duplex = 1; + + speed = priv->r->get_port_reg_le(priv->r->mac_link_spd_sts(port)); + speed >>= (port % 16) << 1; + switch (speed & 0x3) { + case 0: + state->speed = SPEED_10; + break; + case 1: + state->speed = SPEED_100; + break; + case 2: + state->speed = SPEED_1000; + break; + case 3: + if (port == 24 || port == 26) /* Internal serdes */ + state->speed = SPEED_2500; + else + state->speed = SPEED_100; /* Is in fact 500Mbit */ + } + + state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX); + if (priv->r->get_port_reg_le(priv->r->mac_rx_pause_sts) & BIT_ULL(port)) + state->pause |= MLO_PAUSE_RX; + if (priv->r->get_port_reg_le(priv->r->mac_tx_pause_sts) & BIT_ULL(port)) + state->pause |= MLO_PAUSE_TX; + return 1; +} + +static void rtl83xx_phylink_mac_config(struct dsa_switch *ds, int port, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct rtl838x_switch_priv *priv = ds->priv; + u32 reg; + int speed_bit = priv->family_id == RTL8380_FAMILY_ID ? 4 : 3; + + pr_debug("%s port %d, mode %x\n", __func__, port, mode); + + if (port == priv->cpu_port) { + /* Set Speed, duplex, flow control + * FORCE_EN | LINK_EN | NWAY_EN | DUP_SEL + * | SPD_SEL = 0b10 | FORCE_FC_EN | PHY_MASTER_SLV_MANUAL_EN + * | MEDIA_SEL + */ + if (priv->family_id == RTL8380_FAMILY_ID) { + sw_w32(0x6192F, priv->r->mac_force_mode_ctrl(priv->cpu_port)); + /* allow CRC errors on CPU-port */ + sw_w32_mask(0, 0x8, RTL838X_MAC_PORT_CTRL(priv->cpu_port)); + } else { + sw_w32_mask(0, 3, priv->r->mac_force_mode_ctrl(priv->cpu_port)); + } + return; + } + + reg = sw_r32(priv->r->mac_force_mode_ctrl(port)); + /* Auto-Negotiation does not work for MAC in RTL8390 */ + if (priv->family_id == RTL8380_FAMILY_ID) { + if (mode == MLO_AN_PHY) { + pr_debug("PHY autonegotiates\n"); + reg |= BIT(2); + sw_w32(reg, priv->r->mac_force_mode_ctrl(port)); + return; + } + } + + if (mode != MLO_AN_FIXED) + pr_debug("Fixed state.\n"); + + if (priv->family_id == RTL8380_FAMILY_ID) { + /* Clear id_mode_dis bit, and the existing port mode, let + * RGMII_MODE_EN bet set by mac_link_{up,down} + */ + reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN); + + if (state->pause & MLO_PAUSE_TXRX_MASK) { + if (state->pause & MLO_PAUSE_TX) + reg |= TX_PAUSE_EN; + reg |= RX_PAUSE_EN; + } + } + + reg &= ~(3 << speed_bit); + switch (state->speed) { + case SPEED_1000: + reg |= 2 << speed_bit; + break; + case SPEED_100: + reg |= 1 << speed_bit; + break; + } + + if (priv->family_id == RTL8380_FAMILY_ID) { + reg &= ~(DUPLEX_FULL | FORCE_LINK_EN); + if (state->link) + reg |= FORCE_LINK_EN; + if (state->duplex == DUPLEX_FULL) + reg |= DUPLX_MODE; + } + + // Disable AN + if (priv->family_id == RTL8380_FAMILY_ID) + reg &= ~BIT(2); + sw_w32(reg, priv->r->mac_force_mode_ctrl(port)); +} + +static void rtl83xx_phylink_mac_link_down(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface) +{ + struct rtl838x_switch_priv *priv = ds->priv; + /* Stop TX/RX to port */ + sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(port)); +} + +static void rtl83xx_phylink_mac_link_up(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface, + struct phy_device *phydev) +{ + struct rtl838x_switch_priv *priv = ds->priv; + /* Restart TX/RX to port */ + sw_w32_mask(0, 0x3, priv->r->mac_port_ctrl(port)); +} + +static void rtl83xx_get_strings(struct dsa_switch *ds, + int port, u32 stringset, u8 *data) +{ + int i; + + if (stringset != ETH_SS_STATS) + return; + + for (i = 0; i < ARRAY_SIZE(rtl83xx_mib); i++) + strncpy(data + i * ETH_GSTRING_LEN, rtl83xx_mib[i].name, + ETH_GSTRING_LEN); +} + +static void rtl83xx_get_ethtool_stats(struct dsa_switch *ds, int port, + uint64_t *data) +{ + struct rtl838x_switch_priv *priv = ds->priv; + const struct rtl83xx_mib_desc *mib; + int i; + u64 high; + + for (i = 0; i < ARRAY_SIZE(rtl83xx_mib); i++) { + mib = &rtl83xx_mib[i]; + + data[i] = sw_r32(priv->r->stat_port_std_mib(port) + 252 - mib->offset); + if (mib->size == 2) { + high = sw_r32(priv->r->stat_port_std_mib(port) + 252 - mib->offset - 4); + data[i] |= high << 32; + } + } +} + +static int rtl83xx_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + if (sset != ETH_SS_STATS) + return 0; + + return ARRAY_SIZE(rtl83xx_mib); +} + +static int rtl83xx_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct rtl838x_switch_priv *priv = ds->priv; + + pr_debug("%s: %x %d", __func__, (u32) priv, port); + priv->ports[port].enable = true; + + /* enable inner tagging on egress, do not keep any tags */ + sw_w32(1, priv->r->vlan_port_tag_sts_ctrl(port)); + + if (dsa_is_cpu_port(ds, port)) + return 0; + + /* add port to switch mask of CPU_PORT */ + priv->r->mask_port_reg_be(0ULL, BIT_ULL(port), priv->r->port_iso_ctrl(priv->cpu_port)); + + /* add all other ports in the same bridge to switch mask of port */ + priv->r->mask_port_reg_be(0ULL, priv->ports[port].pm, priv->r->port_iso_ctrl(port)); + + return 0; +} + +static void rtl83xx_port_disable(struct dsa_switch *ds, int port) +{ + struct rtl838x_switch_priv *priv = ds->priv; + + pr_debug("%s %x: %d", __func__, (u32)priv, port); + /* you can only disable user ports */ + if (!dsa_is_user_port(ds, port)) + return; + + /* remove port from switch mask of CPU_PORT */ + priv->r->mask_port_reg_be(BIT_ULL(port), 0, priv->r->port_iso_ctrl(priv->cpu_port)); + + /* remove all other ports in the same bridge from switch mask of port */ + priv->r->mask_port_reg_be(priv->ports[port].pm, 0LL, priv->r->port_iso_ctrl(port)); + + priv->ports[port].enable = false; +} + +static int rtl83xx_get_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_eee *e) +{ + struct rtl838x_switch_priv *priv = ds->priv; + + pr_debug("%s: port %d", __func__, port); + e->supported = SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full; + if (sw_r32(priv->r->mac_force_mode_ctrl(port)) & BIT(9)) + e->advertised |= ADVERTISED_100baseT_Full; + + if (sw_r32(priv->r->mac_force_mode_ctrl(port)) & BIT(10)) + e->advertised |= ADVERTISED_1000baseT_Full; + + e->eee_enabled = priv->ports[port].eee_enabled; + pr_debug("enabled: %d, active %x\n", e->eee_enabled, e->advertised); + + if (sw_r32(RTL838X_MAC_EEE_ABLTY) & BIT(port)) { + e->lp_advertised = ADVERTISED_100baseT_Full; + e->lp_advertised |= ADVERTISED_1000baseT_Full; + } + + e->eee_active = !!(e->advertised & e->lp_advertised); + pr_debug("active: %d, lp %x\n", e->eee_active, e->lp_advertised); + + return 0; +} + +static int rtl83xx_set_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_eee *e) +{ + struct rtl838x_switch_priv *priv = ds->priv; + + pr_debug("%s: port %d", __func__, port); + if (e->eee_enabled) { + pr_debug("Globally enabling EEE\n"); + sw_w32_mask(0x4, 0, RTL838X_SMI_GLB_CTRL); + } + if (e->eee_enabled) { + pr_debug("Enabling EEE for MAC %d\n", port); + sw_w32_mask(0, 3 << 9, priv->r->mac_force_mode_ctrl(port)); + sw_w32_mask(0, BIT(port), RTL838X_EEE_PORT_TX_EN); + sw_w32_mask(0, BIT(port), RTL838X_EEE_PORT_RX_EN); + priv->ports[port].eee_enabled = true; + e->eee_enabled = true; + } else { + pr_debug("Disabling EEE for MAC %d\n", port); + sw_w32_mask(3 << 9, 0, priv->r->mac_force_mode_ctrl(port)); + sw_w32_mask(BIT(port), 0, RTL838X_EEE_PORT_TX_EN); + sw_w32_mask(BIT(port), 0, RTL838X_EEE_PORT_RX_EN); + priv->ports[port].eee_enabled = false; + e->eee_enabled = false; + } + return 0; +} + +/* + * Set Switch L2 Aging time, t is time in milliseconds + * t = 0: aging is disabled + */ +static int rtl83xx_set_l2aging(struct dsa_switch *ds, u32 t) +{ + struct rtl838x_switch_priv *priv = ds->priv; + int t_max = priv->family_id == RTL8380_FAMILY_ID ? 0x7fffff : 0x1FFFFF; + + /* Convert time in mseconds to internal value */ + if (t > 0x10000000) { /* Set to maximum */ + t = t_max; + } else { + if (priv->family_id == RTL8380_FAMILY_ID) + t = ((t * 625) / 1000 + 127) / 128; + else + t = (t * 5 + 2) / 3; + } + sw_w32(t, priv->r->l2_ctrl_1); + return 0; +} + +static int rtl83xx_port_bridge_join(struct dsa_switch *ds, int port, + struct net_device *bridge) +{ + struct rtl838x_switch_priv *priv = ds->priv; + u64 port_bitmap = BIT_ULL(priv->cpu_port); + int i; + + pr_debug("%s %x: %d %llx", __func__, (u32)priv, port, port_bitmap); + mutex_lock(&priv->reg_mutex); + for (i = 0; i < ds->num_ports; i++) { + /* Add this port to the port matrix of the other ports in the + * same bridge. If the port is disabled, port matrix is kept + * and not being setup until the port becomes enabled. + */ + if (dsa_is_user_port(ds, i) && i != port) { + if (dsa_to_port(ds, i)->bridge_dev != bridge) + continue; + if (priv->ports[i].enable) + priv->r->mask_port_reg_be(0, BIT_ULL(port), + priv->r->port_iso_ctrl(i)); + priv->ports[i].pm |= BIT_ULL(port); + + port_bitmap |= BIT_ULL(i); + } + } + + /* Add all other ports to this port matrix. */ + if (priv->ports[port].enable) { + priv->r->mask_port_reg_be(0, BIT_ULL(port), + priv->r->port_iso_ctrl(priv->cpu_port)); + priv->r->mask_port_reg_be(0, port_bitmap, + priv->r->port_iso_ctrl(port)); + } + priv->ports[port].pm |= port_bitmap; + mutex_unlock(&priv->reg_mutex); + + return 0; +} + +static void rtl83xx_port_bridge_leave(struct dsa_switch *ds, int port, + struct net_device *bridge) +{ + struct rtl838x_switch_priv *priv = ds->priv; + u64 port_bitmap = BIT_ULL(priv->cpu_port); + int i; + + pr_debug("%s %x: %d", __func__, (u32)priv, port); + mutex_lock(&priv->reg_mutex); + for (i = 0; i < ds->num_ports; i++) { + /* Remove this port from the port matrix of the other ports + * in the same bridge. If the port is disabled, port matrix + * is kept and not being setup until the port becomes enabled. + * And the other port's port matrix cannot be broken when the + * other port is still a VLAN-aware port. + */ + if (dsa_is_user_port(ds, i) && i != port) { + if (dsa_to_port(ds, i)->bridge_dev != bridge) + continue; + if (priv->ports[i].enable) + priv->r->mask_port_reg_be(BIT_ULL(port), 0, + priv->r->port_iso_ctrl(i)); + priv->ports[i].pm &= ~BIT_ULL(port); + + port_bitmap &= ~BIT_ULL(i); + } + } + + /* Add all other ports to this port matrix. */ + if (priv->ports[port].enable) + priv->r->mask_port_reg_be(0, port_bitmap, priv->r->port_iso_ctrl(port)); + priv->ports[port].pm &= ~port_bitmap; + + mutex_unlock(&priv->reg_mutex); +} + +static void rtl83xx_port_stp_state_set(struct dsa_switch *ds, int port, + u8 state) +{ + u32 cmd, msti = 0; + u32 port_state[4]; + int index, bit, i; + int pos = port; + struct rtl838x_switch_priv *priv = ds->priv; + int n = priv->family_id == RTL8380_FAMILY_ID ? 2 : 4; + + pr_debug("%s: port %d state %2x\n", __func__, port, state); + + /* CPU PORT can only be configured on RTL838x */ + if (port >= priv->cpu_port || port > 51) + return; + + mutex_lock(&priv->reg_mutex); + + /* For the RTL839x, the bits are left-aligned in the 128 bit field */ + if (priv->family_id == RTL8390_FAMILY_ID) + pos += 12; + + index = n - (pos >> 4) - 1; + bit = (pos << 1) % 32; + + if (priv->family_id == RTL8380_FAMILY_ID) { + cmd = BIT(15) /* Execute cmd */ + | BIT(14) /* Read */ + | 2 << 12 /* Table type 0b10 */ + | (msti & 0xfff); + } else { + cmd = BIT(16) /* Execute cmd */ + | 0 << 15 /* Read */ + | 5 << 12 /* Table type 0b101 */ + | (msti & 0xfff); + } + priv->r->exec_tbl0_cmd(cmd); + + for (i = 0; i < n; i++) + port_state[i] = sw_r32(priv->r->tbl_access_data_0(i)); + + pr_debug("Current state, port %d: %d\n", port, (port_state[index] >> bit) & 3); + port_state[index] &= ~(3 << bit); + + switch (state) { + case BR_STATE_DISABLED: /* 0 */ + port_state[index] |= (0 << bit); + break; + case BR_STATE_BLOCKING: /* 4 */ + case BR_STATE_LISTENING: /* 1 */ + port_state[index] |= (1 << bit); + break; + case BR_STATE_LEARNING: /* 2 */ + port_state[index] |= (2 << bit); + break; + case BR_STATE_FORWARDING: /* 3*/ + port_state[index] |= (3 << bit); + default: + break; + } + + if (priv->family_id == RTL8380_FAMILY_ID) { + cmd = BIT(15) /* Execute cmd */ + | 0 << 14 /* Write */ + | 2 << 12 /* Table type 0b10 */ + | (msti & 0xfff); + } else { + cmd = 1 << 16 /* Execute cmd */ + | BIT(15) /* Write */ + | 5 << 12 /* Table type 0b101 */ + | (msti & 0xfff); + } + for (i = 0; i < n; i++) + sw_w32(port_state[i], priv->r->tbl_access_data_0(i)); + priv->r->exec_tbl0_cmd(cmd); + + mutex_unlock(&priv->reg_mutex); +} + +static void rtl83xx_fast_age(struct dsa_switch *ds, int port) +{ + struct rtl838x_switch_priv *priv = ds->priv; + int s = priv->family_id == RTL8390_FAMILY_ID ? 2 : 0; + + pr_debug("FAST AGE port %d\n", port); + mutex_lock(&priv->reg_mutex); + /* RTL838X_L2_TBL_FLUSH_CTRL register bits, 839x has 1 bit larger + * port fields: + * 0-4: Replacing port + * 5-9: Flushed/replaced port + * 10-21: FVID + * 22: Entry types: 1: dynamic, 0: also static + * 23: Match flush port + * 24: Match FVID + * 25: Flush (0) or replace (1) L2 entries + * 26: Status of action (1: Start, 0: Done) + */ + sw_w32(1 << (26 + s) | 1 << (23 + s) | port << (5 + (s / 2)), priv->r->l2_tbl_flush_ctrl); + + do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & (1 << (26 + s))); + + mutex_unlock(&priv->reg_mutex); +} + +static int rtl83xx_vlan_filtering(struct dsa_switch *ds, int port, + bool vlan_filtering) +{ + struct rtl838x_switch_priv *priv = ds->priv; + + pr_debug("%s: port %d\n", __func__, port); + mutex_lock(&priv->reg_mutex); + + if (vlan_filtering) { + /* Enable ingress and egress filtering */ + if (port != priv->cpu_port) + sw_w32_mask(0b10 << ((port % 16) << 1), 0b01 << ((port % 16) << 1), + priv->r->vlan_port_igr_filter(port)); + sw_w32_mask(0, 1 << (port % 32), priv->r->vlan_port_egr_filter(port)); + } else { + /* Disable ingress and egress filtering */ + if (port != priv->cpu_port) + sw_w32_mask(0b11 << ((port % 16) << 1), 0, + priv->r->vlan_port_igr_filter(port)); + sw_w32_mask(1 << (port % 32), 0, priv->r->vlan_port_egr_filter(port)); + } + + /* Do we need to do something to the CPU-Port, too? */ + mutex_unlock(&priv->reg_mutex); + + return 0; +} + +static int rtl83xx_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct rtl838x_vlan_info info; + struct rtl838x_switch_priv *priv = ds->priv; + + pr_debug("%s: port %d\n", __func__, port); + + mutex_lock(&priv->reg_mutex); + + if (priv->family_id == RTL8380_FAMILY_ID) + rtl838x_vlan_profile_dump(0); + else + rtl839x_vlan_profile_dump(0); + + priv->r->vlan_tables_read(0, &info); + + pr_debug("Tagged ports %llx, untag %llx, prof %x, MC# %d, UC# %d, FID %x\n", + info.tagged_ports, info.untagged_ports, info.profile_id, + info.hash_mc_fid, info.hash_uc_fid, info.fid); + + mutex_unlock(&priv->reg_mutex); + return 0; +} + +static void rtl83xx_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct rtl838x_vlan_info info = {}; + struct rtl838x_switch_priv *priv = ds->priv; + int v; + + pr_debug("%s port %d, vid_end %d, vid_end %d, flags %x\n", __func__, + port, vlan->vid_begin, vlan->vid_end, vlan->flags); + + if (vlan->vid_begin > 4095 || vlan->vid_end > 4095) { + dev_err(priv->dev, "VLAN out of range: %d - %d", + vlan->vid_begin, vlan->vid_end); + return; + } + + mutex_lock(&priv->reg_mutex); + + if (vlan->flags & BRIDGE_VLAN_INFO_PVID) { + /* Set both inner and outer PVID of the port */ + sw_w32((vlan->vid_end << 16) | vlan->vid_end << 2, priv->r->vlan_port_pb(port)); + priv->ports[port].pvid = vlan->vid_end; + } + + for (v = vlan->vid_begin; v <= vlan->vid_end; v++) { + /* Get port memberships of this vlan */ + priv->r->vlan_tables_read(v, &info); + + /* new VLAN? */ + if (!info.tagged_ports) { + info.fid = 0; + info.hash_mc_fid = false; + info.hash_uc_fid = false; + info.profile_id = 0; + } + + /* sanitize untagged_ports - must be a subset */ + if (info.untagged_ports & ~info.tagged_ports) + info.untagged_ports = 0; + + info.tagged_ports |= BIT_ULL(port); + if (vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED) + info.untagged_ports |= BIT_ULL(port); + + priv->r->vlan_set_untagged(v, info.untagged_ports); + pr_debug("Untagged ports, VLAN %d: %llx\n", v, info.untagged_ports); + + priv->r->vlan_set_tagged(v, &info); + pr_debug("Tagged ports, VLAN %d: %llx\n", v, info.tagged_ports); + } + + mutex_unlock(&priv->reg_mutex); +} + +static int rtl83xx_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct rtl838x_vlan_info info; + struct rtl838x_switch_priv *priv = ds->priv; + int v; + u16 pvid; + + pr_debug("%s: port %d, vid_end %d, vid_end %d, flags %x\n", __func__, + port, vlan->vid_begin, vlan->vid_end, vlan->flags); + + if (vlan->vid_begin > 4095 || vlan->vid_end > 4095) { + dev_err(priv->dev, "VLAN out of range: %d - %d", + vlan->vid_begin, vlan->vid_end); + return -ENOTSUPP; + } + + mutex_lock(&priv->reg_mutex); + pvid = priv->ports[port].pvid; + + for (v = vlan->vid_begin; v <= vlan->vid_end; v++) { + /* Reset to default if removing the current PVID */ + if (v == pvid) + sw_w32(0, priv->r->vlan_port_pb(port)); + + /* Get port memberships of this vlan */ + priv->r->vlan_tables_read(v, &info); + + /* remove port from both tables */ + info.untagged_ports &= (~BIT_ULL(port)); + /* always leave vid 1 */ + if (v != 1) + info.tagged_ports &= (~BIT_ULL(port)); + + priv->r->vlan_set_untagged(v, info.untagged_ports); + pr_debug("Untagged ports, VLAN %d: %llx\n", v, info.untagged_ports); + + priv->r->vlan_set_tagged(v, &info); + pr_debug("Tagged ports, VLAN %d: %llx\n", v, info.tagged_ports); + } + mutex_unlock(&priv->reg_mutex); + + return 0; +} + +static int rtl83xx_port_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct rtl838x_switch_priv *priv = ds->priv; + u64 mac = ether_addr_to_u64(addr); + u32 key = rtl83xx_hash_key(priv, mac, vid); + struct rtl838x_l2_entry e; + u32 r[3]; + u64 entry; + int idx = -1, err = 0, i; + + mutex_lock(&priv->reg_mutex); + for (i = 0; i < 4; i++) { + entry = priv->r->read_l2_entry_using_hash(key, i, &e); + if (!e.valid) { + idx = (key << 2) | i; + break; + } + if ((entry & 0x0fffffffffffffffULL) == ((mac << 12) | vid)) { + idx = (key << 2) | i; + break; + } + } + if (idx >= 0) { + r[0] = 3 << 17 | port << 12; // Aging and port + r[0] |= vid; + r[1] = mac >> 16; + r[2] = (mac & 0xffff) << 12; /* rvid = 0 */ + rtl83xx_write_hash(idx, r); + goto out; + } + + /* Hash buckets full, try CAM */ + for (i = 0; i < 64; i++) { + entry = priv->r->read_cam(i, &e); + if (!e.valid) { + if (idx < 0) /* First empty entry? */ + idx = i; + break; + } else if ((entry & 0x0fffffffffffffffULL) == ((mac << 12) | vid)) { + pr_debug("Found entry in CAM\n"); + idx = i; + break; + } + } + if (idx >= 0) { + r[0] = 3 << 17 | port << 12; // Aging + r[0] |= vid; + r[1] = mac >> 16; + r[2] = (mac & 0xffff) << 12; /* rvid = 0 */ + rtl83xx_write_cam(idx, r); + goto out; + } + err = -ENOTSUPP; +out: + mutex_unlock(&priv->reg_mutex); + return err; +} + +static int rtl83xx_port_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct rtl838x_switch_priv *priv = ds->priv; + u64 mac = ether_addr_to_u64(addr); + u32 key = rtl83xx_hash_key(priv, mac, vid); + struct rtl838x_l2_entry e; + u32 r[3]; + u64 entry; + int idx = -1, err = 0, i; + + pr_debug("In %s, mac %llx, vid: %d, key: %x\n", __func__, mac, vid, key); + mutex_lock(&priv->reg_mutex); + for (i = 0; i < 4; i++) { + entry = priv->r->read_l2_entry_using_hash(key, i, &e); + if (!e.valid) + continue; + if ((entry & 0x0fffffffffffffffULL) == ((mac << 12) | vid)) { + idx = (key << 2) | i; + break; + } + } + + if (idx >= 0) { + r[0] = r[1] = r[2] = 0; + rtl83xx_write_hash(idx, r); + goto out; + } + + /* Check CAM for spillover from hash buckets */ + for (i = 0; i < 64; i++) { + entry = priv->r->read_cam(i, &e); + if ((entry & 0x0fffffffffffffffULL) == ((mac << 12) | vid)) { + idx = i; + break; + } + } + if (idx >= 0) { + r[0] = r[1] = r[2] = 0; + rtl83xx_write_cam(idx, r); + goto out; + } + err = -ENOENT; +out: + mutex_unlock(&priv->reg_mutex); + return err; +} + +static int rtl83xx_port_fdb_dump(struct dsa_switch *ds, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + struct rtl838x_l2_entry e; + struct rtl838x_switch_priv *priv = ds->priv; + int i; + u32 fid; + u32 pkey; + u64 mac; + + mutex_lock(&priv->reg_mutex); + + for (i = 0; i < priv->fib_entries; i++) { + priv->r->read_l2_entry_using_hash(i >> 2, i & 0x3, &e); + + if (!e.valid) + continue; + + if (e.port == port) { + fid = (i & 0x3ff) | (e.rvid & ~0x3ff); + mac = ether_addr_to_u64(&e.mac[0]); + pkey = rtl838x_hash(priv, mac << 12 | fid); + fid = (pkey & 0x3ff) | (fid & ~0x3ff); + pr_debug("-> mac %016llx, fid: %d\n", mac, fid); + cb(e.mac, e.vid, e.is_static, data); + } + } + + for (i = 0; i < 64; i++) { + priv->r->read_cam(i, &e); + + if (!e.valid) + continue; + + if (e.port == port) + cb(e.mac, e.vid, e.is_static, data); + } + + mutex_unlock(&priv->reg_mutex); + return 0; +} + +static int rtl83xx_port_mirror_add(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror, + bool ingress) +{ + /* We support 4 mirror groups, one destination port per group */ + int group; + struct rtl838x_switch_priv *priv = ds->priv; + + pr_debug("In %s\n", __func__); + + for (group = 0; group < 4; group++) { + if (priv->mirror_group_ports[group] == mirror->to_local_port) + break; + } + if (group >= 4) { + for (group = 0; group < 4; group++) { + if (priv->mirror_group_ports[group] < 0) + break; + } + } + + if (group >= 4) + return -ENOSPC; + + pr_debug("Using group %d\n", group); + mutex_lock(&priv->reg_mutex); + + if (priv->family_id == RTL8380_FAMILY_ID) { + /* Enable mirroring to port across VLANs (bit 11) */ + sw_w32(1 << 11 | (mirror->to_local_port << 4) | 1, RTL838X_MIR_CTRL(group)); + } else { + /* Enable mirroring to destination port */ + sw_w32((mirror->to_local_port << 4) | 1, RTL839X_MIR_CTRL(group)); + } + + if (ingress && (priv->r->get_port_reg_be(priv->r->mir_spm(group)) & (1ULL << port))) { + mutex_unlock(&priv->reg_mutex); + return -EEXIST; + } + if ((!ingress) && (priv->r->get_port_reg_be(priv->r->mir_dpm(group)) & (1ULL << port))) { + mutex_unlock(&priv->reg_mutex); + return -EEXIST; + } + + if (ingress) + priv->r->mask_port_reg_be(0, 1ULL << port, priv->r->mir_spm(group)); + else + priv->r->mask_port_reg_be(0, 1ULL << port, priv->r->mir_dpm(group)); + + priv->mirror_group_ports[group] = mirror->to_local_port; + mutex_unlock(&priv->reg_mutex); + return 0; +} + +static void rtl83xx_port_mirror_del(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror) +{ + int group = 0; + struct rtl838x_switch_priv *priv = ds->priv; + + pr_debug("In %s\n", __func__); + for (group = 0; group < 4; group++) { + if (priv->mirror_group_ports[group] == mirror->to_local_port) + break; + } + if (group >= 4) + return; + + mutex_lock(&priv->reg_mutex); + if (mirror->ingress) { + /* Ingress, clear source port matrix */ + priv->r->mask_port_reg_be(1ULL << port, 0, priv->r->mir_spm(group)); + } else { + /* Egress, clear destination port matrix */ + priv->r->mask_port_reg_be(1ULL << port, 0, priv->r->mir_dpm(group)); + } + + if (!(sw_r32(priv->r->mir_spm(group)) || sw_r32(priv->r->mir_dpm(group)))) { + priv->mirror_group_ports[group] = -1; + sw_w32(0, priv->r->mir_ctrl(group)); + } + + mutex_unlock(&priv->reg_mutex); +} + +const struct dsa_switch_ops rtl83xx_switch_ops = { + .get_tag_protocol = rtl83xx_get_tag_protocol, + .setup = rtl83xx_setup, + + .phy_read = rtl83xx_dsa_phy_read, + .phy_write = rtl83xx_dsa_phy_write, + + .phylink_validate = rtl83xx_phylink_validate, + .phylink_mac_link_state = rtl83xx_phylink_mac_link_state, + .phylink_mac_config = rtl83xx_phylink_mac_config, + .phylink_mac_link_down = rtl83xx_phylink_mac_link_down, + .phylink_mac_link_up = rtl83xx_phylink_mac_link_up, + + .get_strings = rtl83xx_get_strings, + .get_ethtool_stats = rtl83xx_get_ethtool_stats, + .get_sset_count = rtl83xx_get_sset_count, + + .port_enable = rtl83xx_port_enable, + .port_disable = rtl83xx_port_disable, + + .get_mac_eee = rtl83xx_get_mac_eee, + .set_mac_eee = rtl83xx_set_mac_eee, + + .set_ageing_time = rtl83xx_set_l2aging, + .port_bridge_join = rtl83xx_port_bridge_join, + .port_bridge_leave = rtl83xx_port_bridge_leave, + .port_stp_state_set = rtl83xx_port_stp_state_set, + .port_fast_age = rtl83xx_fast_age, + + .port_vlan_filtering = rtl83xx_vlan_filtering, + .port_vlan_prepare = rtl83xx_vlan_prepare, + .port_vlan_add = rtl83xx_vlan_add, + .port_vlan_del = rtl83xx_vlan_del, + + .port_fdb_add = rtl83xx_port_fdb_add, + .port_fdb_del = rtl83xx_port_fdb_del, + .port_fdb_dump = rtl83xx_port_fdb_dump, + + .port_mirror_add = rtl83xx_port_mirror_add, + .port_mirror_del = rtl83xx_port_mirror_del, +}; + diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c new file mode 100644 index 0000000000..c7b5873e99 --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c @@ -0,0 +1,476 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include "rtl83xx.h" + +extern struct mutex smi_lock; + + +static inline void rtl838x_mask_port_reg(u64 clear, u64 set, int reg) +{ + sw_w32_mask((u32)clear, (u32)set, reg); +} + +static inline void rtl838x_set_port_reg(u64 set, int reg) +{ + sw_w32(set, reg); +} + +static inline u64 rtl838x_get_port_reg(int reg) +{ + return ((u64) sw_r32(reg)); +} + +static inline int rtl838x_stat_port_std_mib(int p) +{ + return RTL838X_STAT_PORT_STD_MIB + (p << 8); +} + +static inline int rtl838x_port_iso_ctrl(int p) +{ + return RTL838X_PORT_ISO_CTRL(p); +} + +static inline void rtl838x_exec_tbl0_cmd(u32 cmd) +{ + sw_w32(cmd, RTL838X_TBL_ACCESS_CTRL_0); + do { } while (sw_r32(RTL838X_TBL_ACCESS_CTRL_0) & BIT(15)); +} + +static inline void rtl838x_exec_tbl1_cmd(u32 cmd) +{ + sw_w32(cmd, RTL838X_TBL_ACCESS_CTRL_1); + do { } while (sw_r32(RTL838X_TBL_ACCESS_CTRL_1) & BIT(15)); +} + +static inline int rtl838x_tbl_access_data_0(int i) +{ + return RTL838X_TBL_ACCESS_DATA_0(i); +} + +static void rtl838x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info) +{ + u32 cmd, v; + + cmd = BIT(15) /* Execute cmd */ + | BIT(14) /* Read */ + | 0 << 12 /* Table type 0b00 */ + | (vlan & 0xfff); + rtl838x_exec_tbl0_cmd(cmd); + info->tagged_ports = sw_r32(RTL838X_TBL_ACCESS_DATA_0(0)); + v = sw_r32(RTL838X_TBL_ACCESS_DATA_0(1)); + info->profile_id = v & 0x7; + info->hash_mc_fid = !!(v & 0x8); + info->hash_uc_fid = !!(v & 0x10); + info->fid = (v >> 5) & 0x3f; + + + cmd = BIT(15) /* Execute cmd */ + | BIT(14) /* Read */ + | 0 << 12 /* Table type 0b00 */ + | (vlan & 0xfff); + rtl838x_exec_tbl1_cmd(cmd); + info->untagged_ports = sw_r32(RTL838X_TBL_ACCESS_DATA_1(0)); +} + +static void rtl838x_vlan_set_tagged(u32 vlan, struct rtl838x_vlan_info *info) +{ + u32 cmd = BIT(15) /* Execute cmd */ + | 0 << 14 /* Write */ + | 0 << 12 /* Table type 0b00 */ + | (vlan & 0xfff); + u32 v; + + sw_w32(info->tagged_ports, RTL838X_TBL_ACCESS_DATA_0(0)); + + v = info->profile_id; + v |= info->hash_mc_fid ? 0x8 : 0; + v |= info->hash_uc_fid ? 0x10 : 0; + v |= ((u32)info->fid) << 5; + + sw_w32(v, RTL838X_TBL_ACCESS_DATA_0(1)); + rtl838x_exec_tbl0_cmd(cmd); +} + +static void rtl838x_vlan_set_untagged(u32 vlan, u64 portmask) +{ + u32 cmd = BIT(15) /* Execute cmd */ + | 0 << 14 /* Write */ + | 0 << 12 /* Table type 0b00 */ + | (vlan & 0xfff); + sw_w32(portmask & 0x1fffffff, RTL838X_TBL_ACCESS_DATA_1(0)); + rtl838x_exec_tbl1_cmd(cmd); +} + +static inline int rtl838x_mac_force_mode_ctrl(int p) +{ + return RTL838X_MAC_FORCE_MODE_CTRL + (p << 2); +} + +static inline int rtl838x_mac_port_ctrl(int p) +{ + return RTL838X_MAC_PORT_CTRL(p); +} + +static inline int rtl838x_l2_port_new_salrn(int p) +{ + return RTL838X_L2_PORT_NEW_SALRN(p); +} + +static inline int rtl838x_l2_port_new_sa_fwd(int p) +{ + return RTL838X_L2_PORT_NEW_SA_FWD(p); +} + +static inline int rtl838x_mir_ctrl(int group) +{ + return RTL838X_MIR_CTRL(group); +} + +static inline int rtl838x_mir_dpm(int group) +{ + return RTL838X_MIR_DPM_CTRL(group); +} + +static inline int rtl838x_mir_spm(int group) +{ + return RTL838X_MIR_SPM_CTRL(group); +} + +static inline int rtl838x_mac_link_spd_sts(int p) +{ + return RTL838X_MAC_LINK_SPD_STS(p); +} + +static u64 rtl838x_read_l2_entry_using_hash(u32 hash, u32 position, struct rtl838x_l2_entry *e) +{ + u64 entry; + u32 r[3]; + + /* Search in SRAM, with hash and at position in hash bucket (0-3) */ + u32 idx = (0 << 14) | (hash << 2) | position; + + u32 cmd = BIT(16) /* Execute cmd */ + | BIT(15) /* Read */ + | 0 << 13 /* Table type 0b00 */ + | (idx & 0x1fff); + + sw_w32(cmd, RTL838X_TBL_ACCESS_L2_CTRL); + do { } while (sw_r32(RTL838X_TBL_ACCESS_L2_CTRL) & BIT(16)); + r[0] = sw_r32(RTL838X_TBL_ACCESS_L2_DATA(0)); + r[1] = sw_r32(RTL838X_TBL_ACCESS_L2_DATA(1)); + r[2] = sw_r32(RTL838X_TBL_ACCESS_L2_DATA(2)); + + e->mac[0] = (r[1] >> 20); + e->mac[1] = (r[1] >> 12); + e->mac[2] = (r[1] >> 4); + e->mac[3] = (r[1] & 0xf) << 4 | (r[2] >> 28); + e->mac[4] = (r[2] >> 20); + e->mac[5] = (r[2] >> 12); + e->is_static = !!((r[0] >> 19) & 1); + e->vid = r[0] & 0xfff; + e->rvid = r[2] & 0xfff; + e->port = (r[0] >> 12) & 0x1f; + + e->valid = true; + if (!(r[0] >> 17)) /* Check for invalid entry */ + e->valid = false; + + if (e->valid) + pr_debug("Found in Hash: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]); + + entry = (((u64) r[1]) << 32) | (r[2] & 0xfffff000) | (r[0] & 0xfff); + return entry; +} + +static u64 rtl838x_read_cam(int idx, struct rtl838x_l2_entry *e) +{ + u64 entry; + u32 r[3]; + + u32 cmd = BIT(16) /* Execute cmd */ + | BIT(15) /* Read */ + | BIT(13) /* Table type 0b01 */ + | (idx & 0x3f); + sw_w32(cmd, RTL838X_TBL_ACCESS_L2_CTRL); + do { } while (sw_r32(RTL838X_TBL_ACCESS_L2_CTRL) & BIT(16)); + r[0] = sw_r32(RTL838X_TBL_ACCESS_L2_DATA(0)); + r[1] = sw_r32(RTL838X_TBL_ACCESS_L2_DATA(1)); + r[2] = sw_r32(RTL838X_TBL_ACCESS_L2_DATA(2)); + + e->mac[0] = (r[1] >> 20); + e->mac[1] = (r[1] >> 12); + e->mac[2] = (r[1] >> 4); + e->mac[3] = (r[1] & 0xf) << 4 | (r[2] >> 28); + e->mac[4] = (r[2] >> 20); + e->mac[5] = (r[2] >> 12); + e->is_static = !!((r[0] >> 19) & 1); + e->vid = r[0] & 0xfff; + e->rvid = r[2] & 0xfff; + e->port = (r[0] >> 12) & 0x1f; + + e->valid = true; + if (!(r[0] >> 17)) /* Check for invalid entry */ + e->valid = false; + + if (e->valid) + pr_debug("Found in CAM: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]); + + entry = (((u64) r[1]) << 32) | (r[2] & 0xfffff000) | (r[0] & 0xfff); + return entry; +} + +static inline int rtl838x_vlan_profile(int profile) +{ + return RTL838X_VLAN_PROFILE(profile); +} + +static inline int rtl838x_vlan_port_egr_filter(int port) +{ + return RTL838X_VLAN_PORT_EGR_FLTR; +} + +static inline int rtl838x_vlan_port_igr_filter(int port) +{ + return RTL838X_VLAN_PORT_IGR_FLTR(port); +} + +static inline int rtl838x_vlan_port_pb(int port) +{ + return RTL838X_VLAN_PORT_PB_VLAN(port); +} + +static inline int rtl838x_vlan_port_tag_sts_ctrl(int port) +{ + return RTL838X_VLAN_PORT_TAG_STS_CTRL(port); +} + +const struct rtl838x_reg rtl838x_reg = { + .mask_port_reg_be = rtl838x_mask_port_reg, + .set_port_reg_be = rtl838x_set_port_reg, + .get_port_reg_be = rtl838x_get_port_reg, + .mask_port_reg_le = rtl838x_mask_port_reg, + .set_port_reg_le = rtl838x_set_port_reg, + .get_port_reg_le = rtl838x_get_port_reg, + .stat_port_rst = RTL838X_STAT_PORT_RST, + .stat_rst = RTL838X_STAT_RST, + .stat_port_std_mib = rtl838x_stat_port_std_mib, + .port_iso_ctrl = rtl838x_port_iso_ctrl, + .l2_ctrl_0 = RTL838X_L2_CTRL_0, + .l2_ctrl_1 = RTL838X_L2_CTRL_1, + .l2_port_aging_out = RTL838X_L2_PORT_AGING_OUT, + .smi_poll_ctrl = RTL838X_SMI_POLL_CTRL, + .l2_tbl_flush_ctrl = RTL838X_L2_TBL_FLUSH_CTRL, + .exec_tbl0_cmd = rtl838x_exec_tbl0_cmd, + .exec_tbl1_cmd = rtl838x_exec_tbl1_cmd, + .tbl_access_data_0 = rtl838x_tbl_access_data_0, + .isr_glb_src = RTL838X_ISR_GLB_SRC, + .isr_port_link_sts_chg = RTL838X_ISR_PORT_LINK_STS_CHG, + .imr_port_link_sts_chg = RTL838X_IMR_PORT_LINK_STS_CHG, + .imr_glb = RTL838X_IMR_GLB, + .vlan_tables_read = rtl838x_vlan_tables_read, + .vlan_set_tagged = rtl838x_vlan_set_tagged, + .vlan_set_untagged = rtl838x_vlan_set_untagged, + .mac_force_mode_ctrl = rtl838x_mac_force_mode_ctrl, + .mac_port_ctrl = rtl838x_mac_port_ctrl, + .l2_port_new_salrn = rtl838x_l2_port_new_salrn, + .l2_port_new_sa_fwd = rtl838x_l2_port_new_sa_fwd, + .mir_ctrl = rtl838x_mir_ctrl, + .mir_dpm = rtl838x_mir_dpm, + .mir_spm = rtl838x_mir_spm, + .mac_link_sts = RTL838X_MAC_LINK_STS, + .mac_link_dup_sts = RTL838X_MAC_LINK_DUP_STS, + .mac_link_spd_sts = rtl838x_mac_link_spd_sts, + .mac_rx_pause_sts = RTL838X_MAC_RX_PAUSE_STS, + .mac_tx_pause_sts = RTL838X_MAC_TX_PAUSE_STS, + .read_l2_entry_using_hash = rtl838x_read_l2_entry_using_hash, + .read_cam = rtl838x_read_cam, + .vlan_profile = rtl838x_vlan_profile, + .vlan_port_egr_filter = rtl838x_vlan_port_egr_filter, + .vlan_port_igr_filter = rtl838x_vlan_port_igr_filter, + .vlan_port_pb = rtl838x_vlan_port_pb, + .vlan_port_tag_sts_ctrl = rtl838x_vlan_port_tag_sts_ctrl, +}; + +irqreturn_t rtl838x_switch_irq(int irq, void *dev_id) +{ + struct dsa_switch *ds = dev_id; + u32 status = sw_r32(RTL838X_ISR_GLB_SRC); + u32 ports = sw_r32(RTL838X_ISR_PORT_LINK_STS_CHG); + u32 link; + int i; + + /* Clear status */ + sw_w32(ports, RTL838X_ISR_PORT_LINK_STS_CHG); + pr_debug("RTL8380 Link change: status: %x, ports %x\n", status, ports); + + for (i = 0; i < 28; i++) { + if (ports & BIT(i)) { + link = sw_r32(RTL838X_MAC_LINK_STS); + if (link & BIT(i)) + dsa_port_phylink_mac_change(ds, i, true); + else + dsa_port_phylink_mac_change(ds, i, false); + } + } + return IRQ_HANDLED; +} + +int rtl838x_smi_wait_op(int timeout) +{ + do { + timeout--; + udelay(10); + } while ((sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_1) & 0x1) && (timeout >= 0)); + if (timeout <= 0) + return -1; + return 0; +} + +/* + * Reads a register in a page from the PHY + */ +int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val) +{ + u32 v; + u32 park_page; + + if (port > 31) { + *val = 0xffff; + return 0; + } + + if (page > 4095 || reg > 31) + return -ENOTSUPP; + + mutex_lock(&smi_lock); + + if (rtl838x_smi_wait_op(10000)) + goto timeout; + + sw_w32_mask(0xffff0000, port << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2); + + park_page = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_1) & ((0x1f << 15) | 0x2); + v = reg << 20 | page << 3; + sw_w32(v | park_page, RTL838X_SMI_ACCESS_PHY_CTRL_1); + sw_w32_mask(0, 1, RTL838X_SMI_ACCESS_PHY_CTRL_1); + + if (rtl838x_smi_wait_op(10000)) + goto timeout; + + *val = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_2) & 0xffff; + + mutex_unlock(&smi_lock); + return 0; + +timeout: + mutex_unlock(&smi_lock); + return -ETIMEDOUT; +} + +/* + * Write to a register in a page of the PHY + */ +int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val) +{ + u32 v; + u32 park_page; + + val &= 0xffff; + if (port > 31 || page > 4095 || reg > 31) + return -ENOTSUPP; + + mutex_lock(&smi_lock); + if (rtl838x_smi_wait_op(10000)) + goto timeout; + + sw_w32(BIT(port), RTL838X_SMI_ACCESS_PHY_CTRL_0); + mdelay(10); + + sw_w32_mask(0xffff0000, val << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2); + + park_page = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_1) & ((0x1f << 15) | 0x2); + v = reg << 20 | page << 3 | 0x4; + sw_w32(v | park_page, RTL838X_SMI_ACCESS_PHY_CTRL_1); + sw_w32_mask(0, 1, RTL838X_SMI_ACCESS_PHY_CTRL_1); + + if (rtl838x_smi_wait_op(10000)) + goto timeout; + + mutex_unlock(&smi_lock); + return 0; + +timeout: + mutex_unlock(&smi_lock); + return -ETIMEDOUT; +} + +void rtl8380_get_version(struct rtl838x_switch_priv *priv) +{ + u32 rw_save, info_save; + u32 info; + + rw_save = sw_r32(RTL838X_INT_RW_CTRL); + sw_w32(rw_save | 0x3, RTL838X_INT_RW_CTRL); + + info_save = sw_r32(RTL838X_CHIP_INFO); + sw_w32(info_save | 0xA0000000, RTL838X_CHIP_INFO); + + info = sw_r32(RTL838X_CHIP_INFO); + sw_w32(info_save, RTL838X_CHIP_INFO); + sw_w32(rw_save, RTL838X_INT_RW_CTRL); + + if ((info & 0xFFFF) == 0x6275) { + if (((info >> 16) & 0x1F) == 0x1) + priv->version = RTL8380_VERSION_A; + else if (((info >> 16) & 0x1F) == 0x2) + priv->version = RTL8380_VERSION_B; + else + priv->version = RTL8380_VERSION_B; + } else { + priv->version = '-'; + } +} + +/* + * Applies the same hash algorithm as the one used currently by the ASIC + */ +u32 rtl838x_hash(struct rtl838x_switch_priv *priv, u64 seed) +{ + u32 h1, h2, h3, h; + + if (sw_r32(priv->r->l2_ctrl_0) & 1) { + h1 = (seed >> 11) & 0x7ff; + h1 = ((h1 & 0x1f) << 6) | ((h1 >> 5) & 0x3f); + + h2 = (seed >> 33) & 0x7ff; + h2 = ((h2 & 0x3f) << 5) | ((h2 >> 6) & 0x1f); + + h3 = (seed >> 44) & 0x7ff; + h3 = ((h3 & 0x7f) << 4) | ((h3 >> 7) & 0xf); + + h = h1 ^ h2 ^ h3 ^ ((seed >> 55) & 0x1ff); + h ^= ((seed >> 22) & 0x7ff) ^ (seed & 0x7ff); + } else { + h = ((seed >> 55) & 0x1ff) ^ ((seed >> 44) & 0x7ff) + ^ ((seed >> 33) & 0x7ff) ^ ((seed >> 22) & 0x7ff) + ^ ((seed >> 11) & 0x7ff) ^ (seed & 0x7ff); + } + + return h; +} + +void rtl838x_vlan_profile_dump(int index) +{ + u32 profile; + + if (index < 0 || index > 7) + return; + + profile = sw_r32(RTL838X_VLAN_PROFILE(index)); + + pr_debug("VLAN %d: L2 learning: %d, L2 Unknown MultiCast Field %x, \ + IPv4 Unknown MultiCast Field %x, IPv6 Unknown MultiCast Field: %x", + index, profile & 1, (profile >> 1) & 0x1ff, (profile >> 10) & 0x1ff, + (profile >> 19) & 0x1ff); +} diff --git a/target/linux/rtl838x/files-5.4/drivers/net/dsa/rtl838x.h b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.h similarity index 75% rename from target/linux/rtl838x/files-5.4/drivers/net/dsa/rtl838x.h rename to target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.h index 13fb804436..1ebb4dff72 100644 --- a/target/linux/rtl838x/files-5.4/drivers/net/dsa/rtl838x.h +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.h @@ -54,34 +54,28 @@ #define MAPLE_SDS4_FIB_REG0r (RTL838X_SDS4_REG28 + 0x880) #define MAPLE_SDS5_FIB_REG0r (RTL838X_SDS4_REG28 + 0x980) -/* Registers of the internal Serdes of the 8390 */ -#define RTL8390_SDS0_1_XSG0 (0xA000) -#define RTL8390_SDS0_1_XSG1 (0xA100) -#define RTL839X_SDS12_13_XSG0 (0xB800) -#define RTL839X_SDS12_13_XSG1 (0xB900) -#define RTL839X_SDS12_13_PWR0 (0xb880) -#define RTL839X_SDS12_13_PWR1 (0xb980) - /* VLAN registers */ -#define RTL838X_VLAN_PROFILE (0x3A88) +#define RTL838X_VLAN_PROFILE(idx) (0x3A88 + ((idx) << 2)) #define RTL838X_VLAN_PORT_EGR_FLTR (0x3A84) -#define RTL838X_VLAN_PORT_PB_VLAN (0x3C00) -#define RTL838X_VLAN_PORT_IGR_FLTR (0x3A7C) +#define RTL838X_VLAN_PORT_PB_VLAN(port) (0x3C00 + ((port) << 2)) +#define RTL838X_VLAN_PORT_IGR_FLTR(port) (0x3A7C + (((port >> 4) << 2))) #define RTL838X_VLAN_PORT_IGR_FLTR_0 (0x3A7C) -#define RTL838X_VLAN_PORT_IGR_FLTR_1 (0x3A80) -#define RTL839X_VLAN_PROFILE (0x25C0) +#define RTL838X_VLAN_PORT_IGR_FLTR_1 (0x3A7C + 4) +#define RTL838X_VLAN_PORT_TAG_STS_CTRL(port) (0xA530 + (((port) << 2))) +#define RTL839X_VLAN_PROFILE(idx) (0x25C0 + (((idx) << 3))) #define RTL839X_VLAN_CTRL (0x26D4) -#define RTL839X_VLAN_PORT_PB_VLAN (0x26D8) -#define RTL839X_VLAN_PORT_IGR_FLTR (0x27B4) -#define RTL839X_VLAN_PORT_EGR_FLTR (0x27C4) +#define RTL839X_VLAN_PORT_PB_VLAN(port) (0x26D8 + (((port) << 2))) +#define RTL839X_VLAN_PORT_IGR_FLTR(port) (0x27B4 + (((port >> 4) << 2))) +#define RTL839X_VLAN_PORT_EGR_FLTR(port) (0x27C4 + (((port >> 5) << 2))) +#define RTL839X_VLAN_PORT_TAG_STS_CTRL(port) (0x6828 + (((port) << 2))) /* Table 0/1 access registers */ #define RTL838X_TBL_ACCESS_CTRL_0 (0x6914) -#define RTL838X_TBL_ACCESS_DATA_0 (0x6918) +#define RTL838X_TBL_ACCESS_DATA_0(idx) (0x6918 + ((idx) << 2)) #define RTL838X_TBL_ACCESS_CTRL_1 (0xA4C8) #define RTL838X_TBL_ACCESS_DATA_1(idx) (0xA4CC + ((idx) << 2)) #define RTL839X_TBL_ACCESS_CTRL_0 (0x1190) -#define RTL839X_TBL_ACCESS_DATA_0 (0x1194) +#define RTL839X_TBL_ACCESS_DATA_0(idx) (0x1194 + ((idx) << 2)) #define RTL839X_TBL_ACCESS_CTRL_1 (0x6b80) #define RTL839X_TBL_ACCESS_DATA_1(idx) (0x6b84 + ((idx) << 2)) @@ -143,6 +137,36 @@ #define RTL839X_MIR_DPM_CTRL(grp) (0x2530 + (((grp) << 2))) #define RTL839X_MIR_SPM_CTRL(grp) (0x2510 + (((grp) << 2))) +/* Storm control */ +#define RTL838X_STORM_CTRL (0x4700) +#define RTL839X_STORM_CTRL (0x1800) +#define RTL838X_STORM_CTRL_LB_CTRL(p) (0x4884 + (((p) << 2))) +#define RTL838X_STORM_CTRL_BURST_PPS_0 (0x4874) +#define RTL838X_STORM_CTRL_BURST_PPS_1 (0x4878) +#define RTL838X_STORM_CTRL_BURST_0 (0x487c) +#define RTL838X_STORM_CTRL_BURST_1 (0x4880) +#define RTL838X_SCHED_CTRL (0xB980) +#define RTL838X_SCHED_LB_TICK_TKN_CTRL_0 (0xAD58) +#define RTL838X_SCHED_LB_TICK_TKN_CTRL_1 (0xAD5C) +#define RTL839X_SCHED_LB_TICK_TKN_CTRL_0 (0x1804) +#define RTL839X_SCHED_LB_TICK_TKN_CTRL_1 (0x1808) +#define RTL838X_SCHED_LB_THR (0xB984) +#define RTL838X_STORM_CTRL_PORT_BC_EXCEED (0x470C) +#define RTL838X_STORM_CTRL_PORT_MC_EXCEED (0x4710) +#define RTL838X_STORM_CTRL_PORT_UC_EXCEED (0x4714) +#define RTL839X_STORM_CTRL_PORT_BC_EXCEED(p) (0x180c + (((p >> 5) << 2))) +#define RTL839X_STORM_CTRL_PORT_MC_EXCEED(p) (0x1814 + (((p >> 5) << 2))) +#define RTL839X_STORM_CTRL_PORT_UC_EXCEED(p) (0x181c + (((p >> 5) << 2))) +#define RTL838X_STORM_CTRL_PORT_UC(p) (0x4718 + (((p) << 2))) +#define RTL838X_STORM_CTRL_PORT_MC(p) (0x478c + (((p) << 2))) +#define RTL838X_STORM_CTRL_PORT_BC(p) (0x4800 + (((p) << 2))) + +/* Attack prevention */ +#define RTL838X_ATK_PRVNT_PORT_EN (0x5B00) +#define RTL838X_ATK_PRVNT_CTRL (0x5B04) +#define RTL838X_ATK_PRVNT_ACT (0x5B08) +#define RTL838X_ATK_PRVNT_STS (0x5B1C) + enum phy_type { PHY_NONE = 0, PHY_RTL838X_SDS = 1, @@ -158,14 +182,15 @@ struct rtl838x_port { u16 pvid; bool eee_enabled; enum phy_type phy; + const struct dsa_port *dp; }; struct rtl838x_vlan_info { u64 untagged_ports; u64 tagged_ports; u8 profile_id; - bool hash_mc; - bool hash_uc; + bool hash_mc_fid; + bool hash_uc_fid; u8 fid; }; @@ -178,7 +203,7 @@ enum l2_entry_type { }; struct rtl838x_l2_entry { - u8 mac[ETH_ALEN]; + u8 mac[6]; u16 vid; u16 rvid; u8 port; @@ -221,7 +246,7 @@ struct rtl838x_reg { int imr_port_link_sts_chg; int imr_glb; void (*vlan_tables_read)(u32 vlan, struct rtl838x_vlan_info *info); - void (*vlan_set_tagged)(u32 vlan, const struct rtl838x_vlan_info *info); + void (*vlan_set_tagged)(u32 vlan, struct rtl838x_vlan_info *info); void (*vlan_set_untagged)(u32 vlan, u64 portmask); int (*mac_force_mode_ctrl)(int port); int (*mac_port_ctrl)(int port); @@ -241,6 +266,7 @@ struct rtl838x_reg { int (*vlan_port_egr_filter)(int port); int (*vlan_port_igr_filter)(int port); int (*vlan_port_pb)(int port); + int (*vlan_port_tag_sts_ctrl)(int port); }; struct rtl838x_switch_priv { @@ -259,16 +285,9 @@ struct rtl838x_switch_priv { u8 cpu_port; u8 port_mask; u32 fib_entries; + struct dentry *dbgfs_dir; }; -extern struct rtl838x_soc_info soc_info; -extern void rtl8380_sds_rst(int mac); - -extern int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val); -extern int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val); -extern int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val); -extern int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val); -extern int rtl838x_write_mmd_phy(u32 port, u32 addr, u32 reg, u32 val); -extern int rtl838x_read_mmd_phy(u32 port, u32 addr, u32 reg, u32 *val); +void rtl838x_dbgfs_init(struct rtl838x_switch_priv *priv); #endif /* _RTL838X_H */ diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c new file mode 100644 index 0000000000..8dd123f609 --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c @@ -0,0 +1,514 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include "rtl83xx.h" + +extern struct mutex smi_lock; + + +static inline void rtl839x_mask_port_reg_be(u64 clear, u64 set, int reg) +{ + sw_w32_mask((u32)(clear >> 32), (u32)(set >> 32), reg); + sw_w32_mask((u32)(clear & 0xffffffff), (u32)(set & 0xffffffff), reg + 4); +} + +static inline u64 rtl839x_get_port_reg_be(int reg) +{ + u64 v = sw_r32(reg); + + v <<= 32; + v |= sw_r32(reg + 4); + return v; +} + +static inline void rtl839x_set_port_reg_be(u64 set, int reg) +{ + sw_w32(set >> 32, reg); + sw_w32(set & 0xffffffff, reg + 4); +} + +static inline void rtl839x_mask_port_reg_le(u64 clear, u64 set, int reg) +{ + sw_w32_mask((u32)clear, (u32)set, reg); + sw_w32_mask((u32)(clear >> 32), (u32)(set >> 32), reg + 4); +} + +static inline void rtl839x_set_port_reg_le(u64 set, int reg) +{ + sw_w32(set, reg); + sw_w32(set >> 32, reg + 4); +} + +static inline u64 rtl839x_get_port_reg_le(int reg) +{ + u64 v = sw_r32(reg + 4); + + v <<= 32; + v |= sw_r32(reg); + return v; +} + +static inline int rtl839x_stat_port_std_mib(int p) +{ + return RTL839X_STAT_PORT_STD_MIB + (p << 8); +} + +static inline int rtl839x_port_iso_ctrl(int p) +{ + return RTL839X_PORT_ISO_CTRL(p); +} + +static inline void rtl839x_exec_tbl0_cmd(u32 cmd) +{ + sw_w32(cmd, RTL839X_TBL_ACCESS_CTRL_0); + do { } while (sw_r32(RTL839X_TBL_ACCESS_CTRL_0) & BIT(16)); +} + +static inline void rtl839x_exec_tbl1_cmd(u32 cmd) +{ + sw_w32(cmd, RTL839X_TBL_ACCESS_CTRL_1); + do { } while (sw_r32(RTL839X_TBL_ACCESS_CTRL_1) & BIT(16)); +} + +static inline int rtl839x_tbl_access_data_0(int i) +{ + return RTL839X_TBL_ACCESS_DATA_0(i); +} + +static void rtl839x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info) +{ + u32 cmd; + u64 v; + u32 u, w; + + cmd = BIT(16) /* Execute cmd */ + | 0 << 15 /* Read */ + | 0 << 12 /* Table type 0b000 */ + | (vlan & 0xfff); + rtl839x_exec_tbl0_cmd(cmd); + + v = sw_r32(RTL838X_TBL_ACCESS_DATA_0(0)); + v <<= 32; + u = sw_r32(RTL838X_TBL_ACCESS_DATA_0(1)); + v |= u; + info->tagged_ports = v >> 11; + + w = sw_r32(RTL838X_TBL_ACCESS_DATA_0(2)); + + info->profile_id = w >> 30 | ((u & 1) << 2); + info->hash_mc_fid = !!(u & 2); + info->hash_uc_fid = !!(u & 4); + info->fid = (u >> 3) & 0xff; + + cmd = BIT(16) /* Execute cmd */ + | 0 << 15 /* Read */ + | 0 << 12 /* Table type 0b000 */ + | (vlan & 0xfff); + rtl839x_exec_tbl1_cmd(cmd); + v = sw_r32(RTL838X_TBL_ACCESS_DATA_1(0)); + v <<= 32; + v |= sw_r32(RTL838X_TBL_ACCESS_DATA_1(1)); + info->untagged_ports = v >> 11; +} + +static void rtl839x_vlan_set_tagged(u32 vlan, struct rtl838x_vlan_info *info) +{ + u32 cmd = BIT(16) /* Execute cmd */ + | BIT(15) /* Write */ + | 0 << 12 /* Table type 0b00 */ + | (vlan & 0xfff); + u32 w; + u64 v = info->tagged_ports << 11; + + v |= info->profile_id >> 2; + v |= info->hash_mc_fid ? 2 : 0; + v |= info->hash_uc_fid ? 4 : 0; + v |= ((u32)info->fid) << 3; + rtl839x_set_port_reg_be(v, RTL838X_TBL_ACCESS_DATA_0(0)); + + w = info->profile_id; + sw_w32(w << 30, RTL838X_TBL_ACCESS_DATA_0(2)); + rtl839x_exec_tbl0_cmd(cmd); +} + +static void rtl839x_vlan_set_untagged(u32 vlan, u64 portmask) +{ + u32 cmd = BIT(16) /* Execute cmd */ + | BIT(15) /* Write */ + | 0 << 12 /* Table type 0b00 */ + | (vlan & 0xfff); + rtl839x_set_port_reg_be(portmask << 11, RTL838X_TBL_ACCESS_DATA_1(0)); + rtl839x_exec_tbl1_cmd(cmd); +} + +static inline int rtl839x_mac_force_mode_ctrl(int p) +{ + return RTL839X_MAC_FORCE_MODE_CTRL + (p << 2); +} + +static inline int rtl839x_mac_port_ctrl(int p) +{ + return RTL839X_MAC_PORT_CTRL(p); +} + +static inline int rtl839x_l2_port_new_salrn(int p) +{ + return RTL839X_L2_PORT_NEW_SALRN(p); +} + +static inline int rtl839x_l2_port_new_sa_fwd(int p) +{ + return RTL839X_L2_PORT_NEW_SA_FWD(p); +} + +static inline int rtl839x_mir_ctrl(int group) +{ + return RTL839X_MIR_CTRL(group); +} + +static inline int rtl839x_mir_dpm(int group) +{ + return RTL839X_MIR_DPM_CTRL(group); +} + +static inline int rtl839x_mir_spm(int group) +{ + return RTL839X_MIR_SPM_CTRL(group); +} + +static inline int rtl839x_mac_link_spd_sts(int p) +{ + return RTL839X_MAC_LINK_SPD_STS(p); +} + +static u64 rtl839x_read_l2_entry_using_hash(u32 hash, u32 position, struct rtl838x_l2_entry *e) +{ + u64 entry; + u32 r[3]; + + /* Search in SRAM, with hash and at position in hash bucket (0-3) */ + u32 idx = (0 << 14) | (hash << 2) | position; + + u32 cmd = BIT(17) /* Execute cmd */ + | 0 << 16 /* Read */ + | 0 << 14 /* Table type 0b00 */ + | (idx & 0x3fff); + + sw_w32(cmd, RTL839X_TBL_ACCESS_L2_CTRL); + do { } while (sw_r32(RTL839X_TBL_ACCESS_L2_CTRL) & BIT(17)); + r[0] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(0)); + r[1] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(1)); + r[2] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(2)); + + /* Table contains different entry types, we need to identify the right one: + * Check for MC entries, first + */ + e->is_ip_mc = !!(r[2] & BIT(31)); + e->is_ipv6_mc = !!(r[2] & BIT(30)); + e->type = L2_INVALID; + if (!e->is_ip_mc) { + e->mac[0] = (r[0] >> 12); + e->mac[1] = (r[0] >> 4); + e->mac[2] = ((r[1] >> 28) | (r[0] << 4)); + e->mac[3] = (r[1] >> 20); + e->mac[4] = (r[1] >> 12); + e->mac[5] = (r[1] >> 4); + + /* Is it a unicast entry? check multicast bit */ + if (!(e->mac[0] & 1)) { + e->is_static = !!((r[2] >> 18) & 1); + e->vid = (r[2] >> 4) & 0xfff; + e->rvid = (r[0] >> 20) & 0xfff; + e->port = (r[2] >> 24) & 0x3f; + e->block_da = !!(r[2] & BIT(19)); + e->block_sa = !!(r[2] & BIT(20)); + e->suspended = !!(r[2] & BIT(17)); + e->next_hop = !!(r[2] & BIT(16)); + if (e->next_hop) + pr_debug("Found next hop entry, need to read data\n"); + e->age = (r[2] >> 21) & 3; + e->valid = true; + if (!(r[2] & 0xc0fd0000)) /* Check for valid entry */ + e->valid = false; + else + e->type = L2_UNICAST; + } else { + e->valid = true; + e->type = L2_MULTICAST; + e->mc_portmask_index = (r[2]>>6) & 0xfff; + } + } + if (e->is_ip_mc) { + e->valid = true; + e->type = IP4_MULTICAST; + } + if (e->is_ipv6_mc) { + e->valid = true; + e->type = IP6_MULTICAST; + } + + entry = (((u64) r[0]) << 12) | ((r[1] & 0xfffffff0) << 12) | ((r[2] >> 4) & 0xfff); + return entry; +} + +static u64 rtl839x_read_cam(int idx, struct rtl838x_l2_entry *e) +{ + u64 entry; + u32 r[3]; + + u32 cmd = BIT(17) /* Execute cmd */ + | 0 << 16 /* Read */ + | BIT(14) /* Table type 0b01 */ + | (idx & 0x3f); + sw_w32(cmd, RTL839X_TBL_ACCESS_L2_CTRL); + do { } while (sw_r32(RTL839X_TBL_ACCESS_L2_CTRL) & BIT(17)); + r[0] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(0)); + r[1] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(1)); + r[2] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(2)); + + e->mac[0] = (r[0] >> 12); + e->mac[1] = (r[0] >> 4); + e->mac[2] = ((r[1] >> 28) | (r[0] << 4)); + e->mac[3] = (r[1] >> 20); + e->mac[4] = (r[1] >> 12); + e->mac[5] = (r[1] >> 4); + e->is_static = !!((r[2] >> 18) & 1); + e->vid = (r[2] >> 4) & 0xfff; + e->rvid = (r[0] >> 20) & 0xfff; + e->port = (r[2] >> 24) & 0x3f; + + e->valid = true; + if (!(r[2] & 0x10fd0000)) /* Check for invalid entry */ + e->valid = false; + + if (e->valid) + pr_debug("Found in CAM: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]); + + entry = (((u64) r[0]) << 12) | ((r[1] & 0xfffffff0) << 12) | ((r[2] >> 4) & 0xfff); + return entry; +} + +static inline int rtl839x_vlan_profile(int profile) +{ + return RTL839X_VLAN_PROFILE(profile); +} + +static inline int rtl839x_vlan_port_egr_filter(int port) +{ + return RTL839X_VLAN_PORT_EGR_FLTR(port); +} + +static inline int rtl839x_vlan_port_igr_filter(int port) +{ + return RTL839X_VLAN_PORT_IGR_FLTR(port); +} + +static inline int rtl839x_vlan_port_pb(int port) +{ + return RTL839X_VLAN_PORT_PB_VLAN(port); +} + +static inline int rtl839x_vlan_port_tag_sts_ctrl(int port) +{ + return RTL839X_VLAN_PORT_TAG_STS_CTRL(port); +} + +const struct rtl838x_reg rtl839x_reg = { + .mask_port_reg_be = rtl839x_mask_port_reg_be, + .set_port_reg_be = rtl839x_set_port_reg_be, + .get_port_reg_be = rtl839x_get_port_reg_be, + .mask_port_reg_le = rtl839x_mask_port_reg_le, + .set_port_reg_le = rtl839x_set_port_reg_le, + .get_port_reg_le = rtl839x_get_port_reg_le, + .stat_port_rst = RTL839X_STAT_PORT_RST, + .stat_rst = RTL839X_STAT_RST, + .stat_port_std_mib = rtl839x_stat_port_std_mib, + .port_iso_ctrl = rtl839x_port_iso_ctrl, + .l2_ctrl_0 = RTL839X_L2_CTRL_0, + .l2_ctrl_1 = RTL839X_L2_CTRL_1, + .l2_port_aging_out = RTL839X_L2_PORT_AGING_OUT, + .smi_poll_ctrl = RTL839X_SMI_PORT_POLLING_CTRL, + .l2_tbl_flush_ctrl = RTL839X_L2_TBL_FLUSH_CTRL, + .exec_tbl0_cmd = rtl839x_exec_tbl0_cmd, + .exec_tbl1_cmd = rtl839x_exec_tbl1_cmd, + .tbl_access_data_0 = rtl839x_tbl_access_data_0, + .isr_glb_src = RTL839X_ISR_GLB_SRC, + .isr_port_link_sts_chg = RTL839X_ISR_PORT_LINK_STS_CHG, + .imr_port_link_sts_chg = RTL839X_IMR_PORT_LINK_STS_CHG, + .imr_glb = RTL839X_IMR_GLB, + .vlan_tables_read = rtl839x_vlan_tables_read, + .vlan_set_tagged = rtl839x_vlan_set_tagged, + .vlan_set_untagged = rtl839x_vlan_set_untagged, + .mac_force_mode_ctrl = rtl839x_mac_force_mode_ctrl, + .mac_port_ctrl = rtl839x_mac_port_ctrl, + .l2_port_new_salrn = rtl839x_l2_port_new_salrn, + .l2_port_new_sa_fwd = rtl839x_l2_port_new_sa_fwd, + .mir_ctrl = rtl839x_mir_ctrl, + .mir_dpm = rtl839x_mir_dpm, + .mir_spm = rtl839x_mir_spm, + .mac_link_sts = RTL839X_MAC_LINK_STS, + .mac_link_dup_sts = RTL839X_MAC_LINK_DUP_STS, + .mac_link_spd_sts = rtl839x_mac_link_spd_sts, + .mac_rx_pause_sts = RTL839X_MAC_RX_PAUSE_STS, + .mac_tx_pause_sts = RTL839X_MAC_TX_PAUSE_STS, + .read_l2_entry_using_hash = rtl839x_read_l2_entry_using_hash, + .read_cam = rtl839x_read_cam, + .vlan_profile = rtl839x_vlan_profile, + .vlan_port_egr_filter = rtl839x_vlan_port_egr_filter, + .vlan_port_igr_filter = rtl839x_vlan_port_igr_filter, + .vlan_port_pb = rtl839x_vlan_port_pb, + .vlan_port_tag_sts_ctrl = rtl839x_vlan_port_tag_sts_ctrl, +}; + +irqreturn_t rtl839x_switch_irq(int irq, void *dev_id) +{ + struct dsa_switch *ds = dev_id; + u32 status = sw_r32(RTL839X_ISR_GLB_SRC); + u64 ports = rtl839x_get_port_reg_le(RTL839X_ISR_PORT_LINK_STS_CHG); + u64 link; + int i; + + /* Clear status */ + rtl839x_set_port_reg_le(ports, RTL839X_ISR_PORT_LINK_STS_CHG); + pr_debug("RTL8390 Link change: status: %x, ports %llx\n", status, ports); + + for (i = 0; i < 52; i++) { + if (ports & (1ULL << i)) { + link = rtl839x_get_port_reg_le(RTL839X_MAC_LINK_STS); + if (link & (1ULL << i)) + dsa_port_phylink_mac_change(ds, i, true); + else + dsa_port_phylink_mac_change(ds, i, false); + } + } + return IRQ_HANDLED; +} + +// TODO: unused +int rtl8390_sds_power(int mac, int val) +{ + u32 offset = (mac == 48) ? 0x0 : 0x100; + u32 mode = val ? 0 : 1; + + pr_debug("In %s: mac %d, set %d\n", __func__, mac, val); + + if ((mac != 48) && (mac != 49)) { + pr_err("%s: not an SFP port: %d\n", __func__, mac); + return -1; + } + + // Set bit 1003. 1000 starts at 7c + sw_w32_mask(BIT(11), mode << 11, RTL839X_SDS12_13_PWR0 + offset); + + return 0; +} + +int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val) +{ + u32 v; + + if (port > 63 || page > 4095 || reg > 31) + return -ENOTSUPP; + + mutex_lock(&smi_lock); + + sw_w32_mask(0xffff0000, port << 16, RTL839X_PHYREG_DATA_CTRL); + v = reg << 5 | page << 10 | ((page == 0x1fff) ? 0x1f : 0) << 23; + sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); + + sw_w32(0x1ff, RTL839X_PHYREG_CTRL); + + v |= 1; + sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); + + do { + } while (sw_r32(RTL839X_PHYREG_ACCESS_CTRL) & 0x1); + + *val = sw_r32(RTL839X_PHYREG_DATA_CTRL) & 0xffff; + + mutex_unlock(&smi_lock); + return 0; +} + +int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val) +{ + u32 v; + int err = 0; + + val &= 0xffff; + if (port > 63 || page > 4095 || reg > 31) + return -ENOTSUPP; + + mutex_lock(&smi_lock); + /* Clear both port registers */ + sw_w32(0, RTL839X_PHYREG_PORT_CTRL(0)); + sw_w32(0, RTL839X_PHYREG_PORT_CTRL(0) + 4); + sw_w32_mask(0, BIT(port), RTL839X_PHYREG_PORT_CTRL(port)); + + sw_w32_mask(0xffff0000, val << 16, RTL839X_PHYREG_DATA_CTRL); + + v = reg << 5 | page << 10 | ((page == 0x1fff) ? 0x1f : 0) << 23; + sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); + + sw_w32(0x1ff, RTL839X_PHYREG_CTRL); + + v |= BIT(3) | 1; /* Write operation and execute */ + sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); + + do { + } while (sw_r32(RTL839X_PHYREG_ACCESS_CTRL) & 0x1); + + if (sw_r32(RTL839X_PHYREG_ACCESS_CTRL) & 0x2) + err = -EIO; + + mutex_unlock(&smi_lock); + return err; +} + +void rtl8390_get_version(struct rtl838x_switch_priv *priv) +{ + u32 info; + + sw_w32_mask(0xf << 28, 0xa << 28, RTL839X_CHIP_INFO); + info = sw_r32(RTL839X_CHIP_INFO); + pr_debug("Chip-Info: %x\n", info); + priv->version = RTL8390_VERSION_A; +} + +u32 rtl839x_hash(struct rtl838x_switch_priv *priv, u64 seed) +{ + u32 h1, h2, h; + + if (sw_r32(priv->r->l2_ctrl_0) & 1) { + h1 = (u32) (((seed >> 60) & 0x3f) ^ ((seed >> 54) & 0x3f) + ^ ((seed >> 36) & 0x3f) ^ ((seed >> 30) & 0x3f) + ^ ((seed >> 12) & 0x3f) ^ ((seed >> 6) & 0x3f)); + h2 = (u32) (((seed >> 48) & 0x3f) ^ ((seed >> 42) & 0x3f) + ^ ((seed >> 24) & 0x3f) ^ ((seed >> 18) & 0x3f) + ^ (seed & 0x3f)); + h = (h1 << 6) | h2; + } else { + h = (seed >> 60) + ^ ((((seed >> 48) & 0x3f) << 6) | ((seed >> 54) & 0x3f)) + ^ ((seed >> 36) & 0xfff) ^ ((seed >> 24) & 0xfff) + ^ ((seed >> 12) & 0xfff) ^ (seed & 0xfff); + } + + return h; +} + +void rtl839x_vlan_profile_dump(int index) +{ + u32 profile, profile1; + + if (index < 0 || index > 7) + return; + + profile1 = sw_r32(RTL839X_VLAN_PROFILE(index) + 4); + profile = sw_r32(RTL839X_VLAN_PROFILE(index)); + + pr_debug("VLAN %d: L2 learning: %d, L2 Unknown MultiCast Field %x, \ + IPv4 Unknown MultiCast Field %x, IPv6 Unknown MultiCast Field: %x", + index, profile & 1, (profile >> 1) & 0xfff, (profile >> 13) & 0xfff, + (profile1) & 0xfff); +} diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl83xx.h b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl83xx.h new file mode 100644 index 0000000000..3953512525 --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl83xx.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef _NET_DSA_RTL83XX_H +#define _NET_DSA_RTL83XX_H + +#include +#include "rtl838x.h" + + +#define RTL8380_VERSION_A 'A' +#define RTL8390_VERSION_A 'A' +#define RTL8380_VERSION_B 'B' + +struct fdb_update_work { + struct work_struct work; + struct net_device *ndev; + u64 macs[]; +}; + +#define MIB_DESC(_size, _offset, _name) {.size = _size, .offset = _offset, .name = _name} +struct rtl83xx_mib_desc { + unsigned int size; + unsigned int offset; + const char *name; +}; + +void __init rtl83xx_storm_control_init(struct rtl838x_switch_priv *priv); + +/* RTL838x-specific */ +u32 rtl838x_hash(struct rtl838x_switch_priv *priv, u64 seed); +irqreturn_t rtl838x_switch_irq(int irq, void *dev_id); +void rtl8380_get_version(struct rtl838x_switch_priv *priv); +void rtl838x_vlan_profile_dump(int index); +int rtl83xx_dsa_phy_read(struct dsa_switch *ds, int phy_addr, int phy_reg); + +/* RTL839x-specific */ +u32 rtl839x_hash(struct rtl838x_switch_priv *priv, u64 seed); +irqreturn_t rtl839x_switch_irq(int irq, void *dev_id); +void rtl8390_get_version(struct rtl838x_switch_priv *priv); +void rtl839x_vlan_profile_dump(int index); +int rtl83xx_dsa_phy_write(struct dsa_switch *ds, int phy_addr, int phy_reg, u16 val); + +#endif /* _NET_DSA_RTL83XX_H */ + diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/storm.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/storm.c new file mode 100644 index 0000000000..de0af033f3 --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/storm.c @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include "rtl83xx.h" + + +static void rtl83xx_storm_enable(struct rtl838x_switch_priv *priv, int port, bool enable) +{ + // Enable Storm control for that port for UC, MC, and BC + if (enable) + sw_w32(0x7, RTL838X_STORM_CTRL_LB_CTRL(port)); + else + sw_w32(0x0, RTL838X_STORM_CTRL_LB_CTRL(port)); +} + +void __init rtl83xx_storm_control_init(struct rtl838x_switch_priv *priv) +{ + int i; + + pr_debug("Enabling Storm control\n"); + // TICK_PERIOD_PPS + if (priv->id == 0x8380) + sw_w32_mask(0x3ff << 20, 434 << 20, RTL838X_SCHED_LB_TICK_TKN_CTRL_0); + + // Set burst rate + sw_w32(0x00008000, RTL838X_STORM_CTRL_BURST_0); // UC + sw_w32(0x80008000, RTL838X_STORM_CTRL_BURST_1); // MC and BC + + // Set burst Packets per Second to 32 + sw_w32(0x00000020, RTL838X_STORM_CTRL_BURST_PPS_0); // UC + sw_w32(0x00200020, RTL838X_STORM_CTRL_BURST_PPS_1); // MC and BC + + // Include IFG in storm control + sw_w32_mask(0, BIT(6), RTL838X_STORM_CTRL); + // Rate control is based on bytes/s (0 = packets) + sw_w32_mask(0, BIT(5), RTL838X_STORM_CTRL); + // Bandwidth control includes preamble and IFG (10 Bytes) + sw_w32_mask(0, 1, RTL838X_SCHED_CTRL); + + // On SoCs except RTL8382M, set burst size of port egress + if (priv->id != 0x8382) + sw_w32_mask(0xffff, 0x800, RTL838X_SCHED_LB_THR); + + /* Enable storm control on all ports with a PHY and limit rates, + * for UC and MC for both known and unknown addresses */ + for (i = 0; i < priv->cpu_port; i++) { + if (priv->ports[i].phy) { + sw_w32(BIT(18) | 0x8000, RTL838X_STORM_CTRL_PORT_UC(i)); + sw_w32(BIT(18) | 0x8000, RTL838X_STORM_CTRL_PORT_MC(i)); + sw_w32(0x000, RTL838X_STORM_CTRL_PORT_BC(i)); + rtl83xx_storm_enable(priv, i, true); + } + } + + // Attack prevention, enable all attack prevention measures + //sw_w32(0x1ffff, RTL838X_ATK_PRVNT_CTRL); + /* Attack prevention, drop (bit = 0) problematic packets on all ports. + * Setting bit = 1 means: trap to CPU + */ + //sw_w32(0, RTL838X_ATK_PRVNT_ACT); + // Enable attack prevention on all ports + //sw_w32(0x0fffffff, RTL838X_ATK_PRVNT_PORT_EN); +} + diff --git a/target/linux/rtl838x/files-5.4/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.c similarity index 91% rename from target/linux/rtl838x/files-5.4/drivers/net/ethernet/rtl838x_eth.c rename to target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.c index 78c8fdcf68..d53d5dec12 100644 --- a/target/linux/rtl838x/files-5.4/drivers/net/ethernet/rtl838x_eth.c +++ b/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.c @@ -20,9 +20,11 @@ #include #include -#include +#include #include "rtl838x_eth.h" +extern struct rtl83xx_soc_info soc_info; + /* * Maximum number of RX rings is 8, assigned by switch based on * packet/port priortity (not implemented) @@ -43,6 +45,11 @@ #define RING_BUFFER 1600 +#define RTL838X_STORM_CTRL_PORT_BC_EXCEED (0x470C) +#define RTL838X_STORM_CTRL_PORT_MC_EXCEED (0x4710) +#define RTL838X_STORM_CTRL_PORT_UC_EXCEED (0x4714) +#define RTL838X_ATK_PRVNT_STS (0x5B1C) + struct p_hdr { uint8_t *buf; uint16_t reserved; @@ -118,8 +125,6 @@ inline void rtl839x_create_tx_header(struct p_hdr *h, int dest_port) } } -extern void rtl838x_fdb_sync(struct work_struct *work); - struct rtl838x_eth_priv { struct net_device *netdev; struct platform_device *pdev; @@ -222,6 +227,29 @@ struct fdb_update_work { u64 macs[NOTIFY_EVENTS + 1]; }; +void rtl838x_fdb_sync(struct work_struct *work) +{ + const struct fdb_update_work *uw = + container_of(work, struct fdb_update_work, work); + struct switchdev_notifier_fdb_info info; + u8 addr[ETH_ALEN]; + int i = 0; + int action; + + while (uw->macs[i]) { + action = (uw->macs[i] & (1ULL << 63)) ? SWITCHDEV_FDB_ADD_TO_BRIDGE + : SWITCHDEV_FDB_DEL_TO_BRIDGE; + u64_to_ether_addr(uw->macs[i] & 0xffffffffffffULL, addr); + info.addr = &addr[0]; + info.vid = 0; + info.offloaded = 1; + pr_debug("FDB entry %d: %llx, action %d\n", i, uw->macs[0], action); + call_switchdev_notifiers(action, uw->ndev, &info.info, NULL); + i++; + } + kfree(work); +} + static void rtl839x_l2_notification_handler(struct rtl838x_eth_priv *priv) { struct notify_b *nb = priv->membase + sizeof(struct ring_b); @@ -265,6 +293,28 @@ static irqreturn_t rtl838x_net_irq(int irq, void *dev_id) struct net_device *dev = dev_id; struct rtl838x_eth_priv *priv = netdev_priv(dev); u32 status = sw_r32(priv->r->dma_if_intr_sts); + bool triggered = false; + u32 atk = sw_r32(RTL838X_ATK_PRVNT_STS); + u32 storm_uc = sw_r32(RTL838X_STORM_CTRL_PORT_UC_EXCEED); + u32 storm_mc = sw_r32(RTL838X_STORM_CTRL_PORT_MC_EXCEED); + u32 storm_bc = sw_r32(RTL838X_STORM_CTRL_PORT_BC_EXCEED); + + if (storm_uc || storm_mc || storm_bc) { + + pr_warn("Storm control UC: %08x, MC: %08x, BC: %08x\n", + storm_uc, storm_mc, storm_bc); + + sw_w32(storm_uc, RTL838X_STORM_CTRL_PORT_UC_EXCEED); + sw_w32(storm_mc, RTL838X_STORM_CTRL_PORT_MC_EXCEED); + sw_w32(storm_bc, RTL838X_STORM_CTRL_PORT_BC_EXCEED); + + triggered = true; + } + + if (atk) { + pr_debug("Attack prevention triggered: %08x\n", atk); + sw_w32(atk, RTL838X_ATK_PRVNT_STS); + } spin_lock(&priv->lock); /* Ignore TX interrupt */ @@ -276,6 +326,8 @@ static irqreturn_t rtl838x_net_irq(int irq, void *dev_id) /* RX interrupt */ if (status & 0x0ff00) { /* Disable RX interrupt */ + if (triggered) + pr_info("RX\n"); sw_w32_mask(0xff00, 0, priv->r->dma_if_intr_msk); sw_w32(0x0000ff00, priv->r->dma_if_intr_sts); napi_schedule(&priv->napi); @@ -283,14 +335,24 @@ static irqreturn_t rtl838x_net_irq(int irq, void *dev_id) /* RX buffer overrun */ if (status & 0x000ff) { - pr_debug("RX buffer overrun: status %x, mask: %x\n", + pr_info("RX buffer overrun: status %x, mask: %x\n", status, sw_r32(priv->r->dma_if_intr_msk)); sw_w32(0x000000ff, priv->r->dma_if_intr_sts); rtl838x_rb_cleanup(priv); } if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00100000) { - sw_w32(0x00700000, priv->r->dma_if_intr_sts); + sw_w32(0x00100000, priv->r->dma_if_intr_sts); + rtl839x_l2_notification_handler(priv); + } + + if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00200000) { + sw_w32(0x00200000, priv->r->dma_if_intr_sts); + rtl839x_l2_notification_handler(priv); + } + + if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00400000) { + sw_w32(0x00400000, priv->r->dma_if_intr_sts); rtl839x_l2_notification_handler(priv); } @@ -1051,6 +1113,70 @@ static int rtl838x_set_link_ksettings(struct net_device *ndev, return phylink_ethtool_ksettings_set(priv->phylink, cmd); } +int rtl839x_read_sds_phy(int phy_addr, int phy_reg) +{ + int offset = 0; + int reg; + u32 val; + + if (phy_addr == 49) + offset = 0x100; + + /* For the RTL8393 internal SerDes, we simulate a PHY ID in registers 2/3 + * which would otherwise read as 0 + */ + if (soc_info.id == 0x8393) { + if (phy_reg == 2) + return 0x1c; + if (phy_reg == 3) + return 0x8393; + } + + reg = (phy_reg << 1) & 0xfc; + val = sw_r32(RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); + + if (phy_reg & 1) + val = (val >> 16) & 0xffff; + else + val &= 0xffff; + return val; +} + +int rtl838x_read_sds_phy(int phy_addr, int phy_reg) +{ + int offset = 0; + u32 val; + + if (phy_addr == 26) + offset = 0x100; + val = sw_r32(MAPLE_SDS4_FIB_REG0r + offset + (phy_reg << 2)) & 0xffff; + + return val; +} + +int rtl839x_write_sds_phy(int phy_addr, int phy_reg, u16 v) +{ + int offset = 0; + int reg; + u32 val; + + if (phy_addr == 49) + offset = 0x100; + + reg = (phy_reg << 1) & 0xfc; + val = v; + if (phy_reg & 1) { + val = val << 16; + sw_w32_mask(0xffff0000, val, + RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); + } else { + sw_w32_mask(0xffff, val, + RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); + } + + return 0; +} + static int rtl838x_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { u32 val; diff --git a/target/linux/rtl838x/files-5.4/drivers/net/ethernet/rtl838x_eth.h b/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.h similarity index 98% rename from target/linux/rtl838x/files-5.4/drivers/net/ethernet/rtl838x_eth.h rename to target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.h index f434b8c94b..4366e6b64f 100644 --- a/target/linux/rtl838x/files-5.4/drivers/net/ethernet/rtl838x_eth.h +++ b/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.h @@ -116,6 +116,10 @@ #define RTL839X_RMA_CTRL_2 (0x1208) #define RTL839X_RMA_CTRL_3 (0x120C) +/* Registers of the internal Serdes of the 8390 */ +#define RTL839X_SDS12_13_XSG0 (0xB800) + + inline int rtl838x_mac_port_ctrl(int p) { return RTL838X_MAC_PORT_CTRL + (p << 7); @@ -272,6 +276,4 @@ int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val); int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val); int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val); -extern int rtl8380_sds_power(int mac, int val); - #endif /* _RTL838X_ETH_H */ diff --git a/target/linux/rtl838x/files-5.4/drivers/net/dsa/rtl838x_phy.c b/target/linux/realtek/files-5.4/drivers/net/phy/rtl83xx-phy.c similarity index 83% rename from target/linux/rtl838x/files-5.4/drivers/net/dsa/rtl838x_phy.c rename to target/linux/realtek/files-5.4/drivers/net/phy/rtl83xx-phy.c index e5dfdcaa07..eba416934f 100644 --- a/target/linux/rtl838x/files-5.4/drivers/net/dsa/rtl838x_phy.c +++ b/target/linux/realtek/files-5.4/drivers/net/phy/rtl83xx-phy.c @@ -4,52 +4,24 @@ * Copyright (C) 2020 B. Koblitz */ -#include -#include #include -#include -#include +#include #include -#include +#include #include #include -#include -#include "rtl838x.h" - -/* External RTL8218B and RTL8214FC IDs are identical */ -#define PHY_ID_RTL8214C 0x001cc942 -#define PHY_ID_RTL8214FC 0x001cc981 -#define PHY_ID_RTL8218B_E 0x001cc981 -#define PHY_ID_RTL8218B_I 0x001cca40 -#define PHY_ID_RTL8390_GENERIC 0x001ccab0 -#define PHY_ID_RTL8393_I 0x001c8393 - -struct __attribute__ ((__packed__)) part { - uint16_t start; - uint8_t wordsize; - uint8_t words; -}; +#include +#include "rtl83xx-phy.h" -struct __attribute__ ((__packed__)) fw_header { - uint32_t magic; - uint32_t phy; - uint32_t checksum; - uint32_t version; - struct part parts[10]; -}; -#define FIRMWARE_838X_8380_1 "rtl838x_phy/rtl838x_8380.fw" -#define FIRMWARE_838X_8214FC_1 "rtl838x_phy/rtl838x_8214fc.fw" -#define FIRMWARE_838X_8218b_1 "rtl838x_phy/rtl838x_8218b.fw" +extern struct rtl83xx_soc_info soc_info; +extern struct mutex smi_lock; static const struct firmware rtl838x_8380_fw; static const struct firmware rtl838x_8214fc_fw; static const struct firmware rtl838x_8218b_fw; -struct rtl838x_phy_priv { - char *name; -}; static int read_phy(u32 port, u32 page, u32 reg, u32 *val) { @@ -67,7 +39,7 @@ static int write_phy(u32 port, u32 page, u32 reg, u32 val) return rtl838x_write_phy(port, page, reg, val); } -static void rtl8380_int_phy_on_off(int mac, bool on) +static void int_phy_on_off(int mac, bool on) { u32 val; @@ -78,7 +50,7 @@ static void rtl8380_int_phy_on_off(int mac, bool on) write_phy(mac, 0, 0, val | (1 << 11)); } -static void rtl8380_rtl8214fc_on_off(int mac, bool on) +static void rtl8214fc_on_off(int mac, bool on) { u32 val; @@ -99,7 +71,7 @@ static void rtl8380_rtl8214fc_on_off(int mac, bool on) write_phy(mac, 0xa40, 16, val | (1 << 11)); } -static void rtl8380_phy_reset(int mac) +static void phy_reset(int mac) { u32 val; @@ -107,89 +79,12 @@ static void rtl8380_phy_reset(int mac) write_phy(mac, 0, 0, val | (0x1 << 15)); } -void rtl8380_sds_rst(int mac) -{ - u32 offset = (mac == 24) ? 0 : 0x100; - - sw_w32_mask(1 << 11, 0, RTL8380_SDS4_FIB_REG0 + offset); - sw_w32_mask(0x3, 0, RTL838X_SDS4_REG28 + offset); - sw_w32_mask(0x3, 0x3, RTL838X_SDS4_REG28 + offset); - sw_w32_mask(0, 0x1 << 6, RTL838X_SDS4_DUMMY0 + offset); - sw_w32_mask(0x1 << 6, 0, RTL838X_SDS4_DUMMY0 + offset); - pr_info("SERDES reset: %d\n", mac); -} - -int rtl839x_read_sds_phy(int phy_addr, int phy_reg) -{ - int offset = 0; - int reg; - u32 val; - - if (phy_addr == 49) - offset = 0x100; - - /* For the RTL8393 internal SerDes, we simulate a PHY ID in registers 2/3 - * which would otherwise read as 0 - */ - if (soc_info.id == 0x8393) { - if (phy_reg == 2) - return 0x1c; - if (phy_reg == 3) - return 0x8393; - } - - reg = (phy_reg << 1) & 0xfc; - val = sw_r32(RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); - - if (phy_reg & 1) - val = (val >> 16) & 0xffff; - else - val &= 0xffff; - return val; -} - -int rtl838x_read_sds_phy(int phy_addr, int phy_reg) -{ - int offset = 0; - u32 val; - - if (phy_addr == 26) - offset = 0x100; - val = sw_r32(MAPLE_SDS4_FIB_REG0r + offset + (phy_reg << 2)) & 0xffff; - - return val; -} - -int rtl839x_write_sds_phy(int phy_addr, int phy_reg, u16 v) -{ - int offset = 0; - int reg; - u32 val; - - if (phy_addr == 49) - offset = 0x100; - - reg = (phy_reg << 1) & 0xfc; - val = v; - if (phy_reg & 1) { - val = val << 16; - sw_w32_mask(0xffff0000, val, - RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); - } else { - sw_w32_mask(0xffff, val, - RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); - } - - return 0; -} - /* Read the link and speed status of the 2 internal SGMII/1000Base-X * ports of the RTL838x SoCs */ static int rtl8380_read_status(struct phy_device *phydev) { int err; - int phy_addr = phydev->mdio.addr; err = genphy_read_status(phydev); @@ -229,9 +124,9 @@ static int rtl8393_read_status(struct phy_device *phydev) return err; } -static struct fw_header * -rtl838x_request_fw(struct phy_device *phydev, const struct firmware *fw, - const char *name) +static struct fw_header *rtl838x_request_fw(struct phy_device *phydev, + const struct firmware *fw, + const char *name) { struct device *dev = &phydev->mdio.dev; int err; @@ -339,9 +234,9 @@ static int rtl8380_configure_int_rtl8218b(struct phy_device *phydev) read_phy(mac, 0, 0, &val); if (val & (1 << 11)) - rtl8380_int_phy_on_off(mac, true); + int_phy_on_off(mac, true); else - rtl8380_phy_reset(mac); + phy_reset(mac); msleep(100); /* Ready PHY for patch */ @@ -431,9 +326,9 @@ static int rtl8380_configure_ext_rtl8218b(struct phy_device *phydev) read_phy(mac, 0, 0, &val); if (val & (1 << 11)) - rtl8380_int_phy_on_off(mac, true); + int_phy_on_off(mac, true); else - rtl8380_phy_reset(mac); + phy_reset(mac); msleep(100); /* Get Chip revision */ @@ -528,28 +423,100 @@ static int rtl8218b_ext_match_phy_device(struct phy_device *phydev) return phydev->phy_id == PHY_ID_RTL8218B_E; } +/* + * Read an mmd register of the PHY + */ +static int rtl83xx_read_mmd_phy(u32 port, u32 addr, u32 reg, u32 *val) +{ + u32 v; -static int rtl8380_rtl8218b_write_mmd(struct phy_device *phydev, - int devnum, u16 regnum, u16 val) + mutex_lock(&smi_lock); + + if (rtl838x_smi_wait_op(10000)) + goto timeout; + + sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0); + mdelay(10); + + sw_w32_mask(0xffff0000, port << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2); + + v = addr << 16 | reg; + sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_3); + + /* mmd-access | read | cmd-start */ + v = 1 << 1 | 0 << 2 | 1; + sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_1); + + if (rtl838x_smi_wait_op(10000)) + goto timeout; + + *val = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_2) & 0xffff; + + mutex_unlock(&smi_lock); + return 0; + +timeout: + mutex_unlock(&smi_lock); + return -ETIMEDOUT; +} + +/* + * Write to an mmd register of the PHY + */ +static int rtl838x_write_mmd_phy(u32 port, u32 addr, u32 reg, u32 val) { - int addr = phydev->mdio.addr; + u32 v; - return rtl838x_write_mmd_phy(addr, devnum, regnum, val); + pr_debug("MMD write: port %d, dev %d, reg %d, val %x\n", port, addr, reg, val); + val &= 0xffff; + mutex_lock(&smi_lock); + + if (rtl838x_smi_wait_op(10000)) + goto timeout; + + sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0); + mdelay(10); + + sw_w32_mask(0xffff0000, val << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2); + + sw_w32_mask(0x1f << 16, addr << 16, RTL838X_SMI_ACCESS_PHY_CTRL_3); + sw_w32_mask(0xffff, reg, RTL838X_SMI_ACCESS_PHY_CTRL_3); + /* mmd-access | write | cmd-start */ + v = 1 << 1 | 1 << 2 | 1; + sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_1); + + if (rtl838x_smi_wait_op(10000)) + goto timeout; + + mutex_unlock(&smi_lock); + return 0; + +timeout: + mutex_unlock(&smi_lock); + return -ETIMEDOUT; } -static int rtl8380_rtl8218b_read_mmd(struct phy_device *phydev, +static int rtl8218b_read_mmd(struct phy_device *phydev, int devnum, u16 regnum) { int ret; u32 val; int addr = phydev->mdio.addr; - ret = rtl838x_read_mmd_phy(addr, devnum, regnum, &val); + ret = rtl83xx_read_mmd_phy(addr, devnum, regnum, &val); if (ret) return ret; return val; } +static int rtl8218b_write_mmd(struct phy_device *phydev, + int devnum, u16 regnum, u16 val) +{ + int addr = phydev->mdio.addr; + + return rtl838x_write_mmd_phy(addr, devnum, regnum, val); +} + static void rtl8380_rtl8214fc_media_set(int mac, bool set_fibre) { int base = mac - (mac % 4); @@ -622,7 +589,7 @@ static bool rtl8380_rtl8214fc_media_is_fibre(int mac) return true; } -static int rtl8380_rtl8214fc_set_port(struct phy_device *phydev, int port) +static int rtl8214fc_set_port(struct phy_device *phydev, int port) { bool is_fibre = (port == PORT_FIBRE ? true : false); int addr = phydev->mdio.addr; @@ -633,7 +600,7 @@ static int rtl8380_rtl8214fc_set_port(struct phy_device *phydev, int port) return 0; } -static int rtl8380_rtl8214fc_get_port(struct phy_device *phydev) +static int rtl8214fc_get_port(struct phy_device *phydev) { int addr = phydev->mdio.addr; @@ -643,12 +610,7 @@ static int rtl8380_rtl8214fc_get_port(struct phy_device *phydev) return PORT_MII; } -void rtl8380_rtl8214fc_ldps_set(int mac, struct ethtool_eee *e) -{ - -} - -static void rtl8380_rtl8218b_eee_set_u_boot(int port, bool enable) +static void rtl8218b_eee_set_u_boot(int port, bool enable) { u32 val; bool an_enabled; @@ -691,29 +653,8 @@ static void rtl8380_rtl8218b_eee_set_u_boot(int port, bool enable) write_phy(port, 0xa42, 29, 0); } -static int rtl8380_rtl8218b_get_eee_u_boot(struct phy_device *phydev, struct ethtool_eee *e) -{ - u32 val; - int addr = phydev->mdio.addr; - - pr_debug("In %s %d\n", __func__, addr); - - /* Set GPHY page to copper */ - write_phy(addr, 0xa42, 29, 0x0001); - - read_phy(addr, 0xa43, 25, &val); - if (e->eee_enabled && (!!(val & (1 << 4)))) - e->eee_enabled = !!(val & (1 << 4)); - else - e->eee_enabled = 0; - - /* GPHY page to auto */ - write_phy(addr, 0xa42, 29, 0x0000); - - return 0; -} - -void rtl8380_rtl8218b_eee_set(int port, bool enable) +// TODO: unused +static void rtl8380_rtl8218b_eee_set(int port, bool enable) { u32 val; bool an_enabled; @@ -755,7 +696,7 @@ void rtl8380_rtl8218b_eee_set(int port, bool enable) write_phy(port, 0xa42, 29, 0); } -int rtl8380_rtl8218b_get_eee(struct phy_device *phydev, +static int rtl8218b_get_eee(struct phy_device *phydev, struct ethtool_eee *e) { u32 val; @@ -766,7 +707,7 @@ int rtl8380_rtl8218b_get_eee(struct phy_device *phydev, /* Set GPHY page to copper */ write_phy(addr, 0xa42, 29, 0x0001); - rtl838x_read_mmd_phy(addr, 7, 60, &val); + rtl83xx_read_mmd_phy(addr, 7, 60, &val); if (e->eee_enabled && (!!(val & (1 << 7)))) e->eee_enabled = !!(val & (1 << 7)); else @@ -778,7 +719,8 @@ int rtl8380_rtl8218b_get_eee(struct phy_device *phydev, return 0; } -void rtl8380_rtl8218b_green_set(int mac, bool enable) +// TODO: unused +static void rtl8380_rtl8218b_green_set(int mac, bool enable) { u32 val; @@ -801,7 +743,8 @@ void rtl8380_rtl8218b_green_set(int mac, bool enable) write_phy(mac, 0xa42, 29, 0x0000); } -int rtl8380_rtl8214fc_get_green(struct phy_device *phydev, struct ethtool_eee *e) +// TODO: unused +static int rtl8380_rtl8214fc_get_green(struct phy_device *phydev, struct ethtool_eee *e) { u32 val; int addr = phydev->mdio.addr; @@ -823,8 +766,8 @@ int rtl8380_rtl8214fc_get_green(struct phy_device *phydev, struct ethtool_eee *e return 0; } -static int rtl8380_rtl8214fc_set_eee(struct phy_device *phydev, - struct ethtool_eee *e) +static int rtl8214fc_set_eee(struct phy_device *phydev, + struct ethtool_eee *e) { u32 pollMask; int addr = phydev->mdio.addr; @@ -838,12 +781,12 @@ static int rtl8380_rtl8214fc_set_eee(struct phy_device *phydev, pollMask = sw_r32(RTL838X_SMI_POLL_CTRL); sw_w32(0, RTL838X_SMI_POLL_CTRL); - rtl8380_rtl8218b_eee_set_u_boot(addr, (bool) e->eee_enabled); + rtl8218b_eee_set_u_boot(addr, (bool) e->eee_enabled); sw_w32(pollMask, RTL838X_SMI_POLL_CTRL); return 0; } -static int rtl8380_rtl8214fc_get_eee(struct phy_device *phydev, +static int rtl8214fc_get_eee(struct phy_device *phydev, struct ethtool_eee *e) { int addr = phydev->mdio.addr; @@ -854,10 +797,10 @@ static int rtl8380_rtl8214fc_get_eee(struct phy_device *phydev, return -ENOTSUPP; } - return rtl8380_rtl8218b_get_eee_u_boot(phydev, e); + return rtl8218b_get_eee(phydev, e); } -static int rtl8380_rtl8218b_set_eee(struct phy_device *phydev, +static int rtl8218b_set_eee(struct phy_device *phydev, struct ethtool_eee *e) { u32 pollMask; @@ -867,7 +810,7 @@ static int rtl8380_rtl8218b_set_eee(struct phy_device *phydev, pollMask = sw_r32(RTL838X_SMI_POLL_CTRL); sw_w32(0, RTL838X_SMI_POLL_CTRL); - rtl8380_rtl8218b_eee_set_u_boot(addr, (bool) e->eee_enabled); + rtl8218b_eee_set_u_boot(addr, (bool) e->eee_enabled); sw_w32(pollMask, RTL838X_SMI_POLL_CTRL); return 0; @@ -943,9 +886,9 @@ static int rtl8380_configure_rtl8214fc(struct phy_device *phydev) read_phy(mac, 0, 16, &val); if (val & (1 << 11)) - rtl8380_rtl8214fc_on_off(mac, true); + rtl8214fc_on_off(mac, true); else - rtl8380_phy_reset(mac); + phy_reset(mac); msleep(100); write_phy(mac, 0, 30, 0x0001); @@ -1356,10 +1299,10 @@ static int rtl8390_serdes_probe(struct phy_device *phydev) return rtl8390_configure_generic(phydev); } -static struct phy_driver rtl838x_phy_driver[] = { +static struct phy_driver rtl83xx_phy_driver[] = { { PHY_ID_MATCH_MODEL(PHY_ID_RTL8214C), - .name = "REALTEK RTL8214C", + .name = "Realtek RTL8214C", .features = PHY_GBIT_FEATURES, .match_phy_device = rtl8214c_match_phy_device, .probe = rtl8214c_phy_probe, @@ -1369,62 +1312,62 @@ static struct phy_driver rtl838x_phy_driver[] = { }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8214FC), - .name = "REALTEK RTL8214FC", + .name = "Realtek RTL8214FC", .features = PHY_GBIT_FIBRE_FEATURES, .match_phy_device = rtl8214fc_match_phy_device, .probe = rtl8214fc_phy_probe, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, - .read_mmd = rtl8380_rtl8218b_read_mmd, - .write_mmd = rtl8380_rtl8218b_write_mmd, - .set_port = rtl8380_rtl8214fc_set_port, - .get_port = rtl8380_rtl8214fc_get_port, - .set_eee = rtl8380_rtl8214fc_set_eee, - .get_eee = rtl8380_rtl8214fc_get_eee, + .read_mmd = rtl8218b_read_mmd, + .write_mmd = rtl8218b_write_mmd, + .set_port = rtl8214fc_set_port, + .get_port = rtl8214fc_get_port, + .set_eee = rtl8214fc_set_eee, + .get_eee = rtl8214fc_get_eee, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_E), - .name = "REALTEK RTL8218B (external)", + .name = "Realtek RTL8218B (external)", .features = PHY_GBIT_FEATURES, .match_phy_device = rtl8218b_ext_match_phy_device, .probe = rtl8218b_ext_phy_probe, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, - .read_mmd = rtl8380_rtl8218b_read_mmd, - .write_mmd = rtl8380_rtl8218b_write_mmd, - .set_eee = rtl8380_rtl8218b_set_eee, - .get_eee = rtl8380_rtl8218b_get_eee_u_boot, + .read_mmd = rtl8218b_read_mmd, + .write_mmd = rtl8218b_write_mmd, + .set_eee = rtl8218b_set_eee, + .get_eee = rtl8218b_get_eee, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_I), - .name = "REALTEK RTL8218B (internal)", + .name = "Realtek RTL8218B (internal)", .features = PHY_GBIT_FEATURES, .probe = rtl8218b_int_phy_probe, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, - .read_mmd = rtl8380_rtl8218b_read_mmd, - .write_mmd = rtl8380_rtl8218b_write_mmd, - .set_eee = rtl8380_rtl8218b_set_eee, - .get_eee = rtl8380_rtl8218b_get_eee_u_boot, + .read_mmd = rtl8218b_read_mmd, + .write_mmd = rtl8218b_write_mmd, + .set_eee = rtl8218b_set_eee, + .get_eee = rtl8218b_get_eee, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_I), - .name = "REALTEK RTL8380 SERDES", + .name = "Realtek RTL8380 SERDES", .features = PHY_GBIT_FIBRE_FEATURES, .probe = rtl838x_serdes_probe, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, - .read_mmd = rtl8380_rtl8218b_read_mmd, - .write_mmd = rtl8380_rtl8218b_write_mmd, + .read_mmd = rtl8218b_read_mmd, + .write_mmd = rtl8218b_write_mmd, .read_status = rtl8380_read_status, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8393_I), - .name = "REALTEK RTL8393 SERDES", + .name = "Realtek RTL8393 SERDES", .features = PHY_GBIT_FIBRE_FEATURES, .probe = rtl8393_serdes_probe, .suspend = genphy_suspend, @@ -1434,7 +1377,7 @@ static struct phy_driver rtl838x_phy_driver[] = { }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8390_GENERIC), - .name = "REALTEK RTL8390 Generic", + .name = "Realtek RTL8390 Generic", .features = PHY_GBIT_FIBRE_FEATURES, .probe = rtl8390_serdes_probe, .suspend = genphy_suspend, @@ -1443,15 +1386,15 @@ static struct phy_driver rtl838x_phy_driver[] = { } }; -module_phy_driver(rtl838x_phy_driver); +module_phy_driver(rtl83xx_phy_driver); -static struct mdio_device_id __maybe_unused rtl838x_tbl[] = { +static struct mdio_device_id __maybe_unused rtl83xx_tbl[] = { { PHY_ID_MATCH_MODEL(PHY_ID_RTL8214FC) }, { } }; -MODULE_DEVICE_TABLE(mdio, rtl838x_tbl); +MODULE_DEVICE_TABLE(mdio, rtl83xx_tbl); MODULE_AUTHOR("B. Koblitz"); -MODULE_DESCRIPTION("RTL838x PHY driver"); +MODULE_DESCRIPTION("RTL83xx PHY driver"); MODULE_LICENSE("GPL"); diff --git a/target/linux/realtek/files-5.4/drivers/net/phy/rtl83xx-phy.h b/target/linux/realtek/files-5.4/drivers/net/phy/rtl83xx-phy.h new file mode 100644 index 0000000000..7af35a3583 --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/net/phy/rtl83xx-phy.h @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-only + +// TODO: not really used +struct rtl838x_phy_priv { + char *name; +}; + +struct __attribute__ ((__packed__)) part { + uint16_t start; + uint8_t wordsize; + uint8_t words; +}; + +struct __attribute__ ((__packed__)) fw_header { + uint32_t magic; + uint32_t phy; + uint32_t checksum; + uint32_t version; + struct part parts[10]; +}; + +// TODO: fixed path? +#define FIRMWARE_838X_8380_1 "rtl838x_phy/rtl838x_8380.fw" +#define FIRMWARE_838X_8214FC_1 "rtl838x_phy/rtl838x_8214fc.fw" +#define FIRMWARE_838X_8218b_1 "rtl838x_phy/rtl838x_8218b.fw" + +/* External RTL8218B and RTL8214FC IDs are identical */ +#define PHY_ID_RTL8214C 0x001cc942 +#define PHY_ID_RTL8214FC 0x001cc981 +#define PHY_ID_RTL8218B_E 0x001cc981 +#define PHY_ID_RTL8218B_I 0x001cca40 +#define PHY_ID_RTL8390_GENERIC 0x001ccab0 +#define PHY_ID_RTL8393_I 0x001c8393 + +#define RTL839X_SDS12_13_XSG0 (0xB800) + +#define RTL838X_SDS_MODE_SEL (0x0028) +#define RTL838X_SDS_CFG_REG (0x0034) +#define RTL838X_INT_MODE_CTRL (0x005c) +#define RTL838X_DMY_REG31 (0x3b28) diff --git a/target/linux/rtl838x/files/firmware/rtl838x_phy/rtl838x_8214fc.fw b/target/linux/realtek/files/firmware/rtl838x_phy/rtl838x_8214fc.fw similarity index 100% rename from target/linux/rtl838x/files/firmware/rtl838x_phy/rtl838x_8214fc.fw rename to target/linux/realtek/files/firmware/rtl838x_phy/rtl838x_8214fc.fw diff --git a/target/linux/rtl838x/files/firmware/rtl838x_phy/rtl838x_8218b.fw b/target/linux/realtek/files/firmware/rtl838x_phy/rtl838x_8218b.fw similarity index 100% rename from target/linux/rtl838x/files/firmware/rtl838x_phy/rtl838x_8218b.fw rename to target/linux/realtek/files/firmware/rtl838x_phy/rtl838x_8218b.fw diff --git a/target/linux/rtl838x/files/firmware/rtl838x_phy/rtl838x_8380.fw b/target/linux/realtek/files/firmware/rtl838x_phy/rtl838x_8380.fw similarity index 100% rename from target/linux/rtl838x/files/firmware/rtl838x_phy/rtl838x_8380.fw rename to target/linux/realtek/files/firmware/rtl838x_phy/rtl838x_8380.fw diff --git a/target/linux/rtl838x/generic/target.mk b/target/linux/realtek/generic/target.mk similarity index 100% rename from target/linux/rtl838x/generic/target.mk rename to target/linux/realtek/generic/target.mk diff --git a/target/linux/rtl838x/image/Makefile b/target/linux/realtek/image/Makefile similarity index 84% rename from target/linux/rtl838x/image/Makefile rename to target/linux/realtek/image/Makefile index 266759220f..4e9dbc350d 100644 --- a/target/linux/rtl838x/image/Makefile +++ b/target/linux/realtek/image/Makefile @@ -55,4 +55,17 @@ define Device/d-link_dgs-1210-28 DEVICE_MODEL := DGS-1210-28 endef TARGET_DEVICES += d-link_dgs-1210-28 + +define Device/netgear_gs110tpp-v1 + $(Device/Default) + SOC := rtl8380 + IMAGE_SIZE := 14848k + UIMAGE_MAGIC := 0x4e474520 + DEVICE_VENDOR := NETGEAR + DEVICE_MODEL := GS110TP + DEVICE_VARIANT := v1 + DEVICE_PACKAGES := ip-full ip-bridge ethtool tc +endef +TARGET_DEVICES += netgear_gs110tpp-v1 + $(eval $(call BuildImage)) diff --git a/target/linux/rtl838x/patches-5.4/300-mips-add-rtl838x-platform.patch b/target/linux/realtek/patches-5.4/300-mips-add-rtl838x-platform.patch similarity index 60% rename from target/linux/rtl838x/patches-5.4/300-mips-add-rtl838x-platform.patch rename to target/linux/realtek/patches-5.4/300-mips-add-rtl838x-platform.patch index ec114a04c9..2c4f062792 100644 --- a/target/linux/rtl838x/patches-5.4/300-mips-add-rtl838x-platform.patch +++ b/target/linux/realtek/patches-5.4/300-mips-add-rtl838x-platform.patch @@ -1,5 +1,7 @@ ---- a/arch/mips/Kbuild.platforms -+++ b/arch/mips/Kbuild.platforms +Index: linux-5.4.77/arch/mips/Kbuild.platforms +=================================================================== +--- linux-5.4.77.orig/arch/mips/Kbuild.platforms ++++ linux-5.4.77/arch/mips/Kbuild.platforms @@ -27,6 +27,7 @@ platforms += pistachio platforms += pmcs-msp71xx platforms += pnx833x @@ -8,9 +10,11 @@ platforms += rb532 platforms += sgi-ip22 platforms += sgi-ip27 ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -630,6 +630,29 @@ config RALINK +Index: linux-5.4.77/arch/mips/Kconfig +=================================================================== +--- linux-5.4.77.orig/arch/mips/Kconfig ++++ linux-5.4.77/arch/mips/Kconfig +@@ -630,6 +630,26 @@ config RALINK select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER @@ -25,16 +29,13 @@ + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_MIPS16 -+ select SYS_SUPPORTS_MULTITHREADING -+ select SYS_SUPPORTS_VPE_LOADER + select SYS_HAS_EARLY_PRINTK -+ select SWAP_IO_SPACE ++ select SYS_HAS_EARLY_PRINTK_8250 ++ select USE_GENERIC_EARLY_PRINTK_8250 + select BOOT_RAW -+ select CLKDEV_LOOKUP + select PINCTRL + select ARCH_HAS_RESET_CONTROLLER + select RESET_CONTROLLER -+ select RTL8380_SERIES + select USE_OF + config SGI_IP22 diff --git a/target/linux/rtl838x/patches-5.4/301-gpio-add-rtl838x-driver.patch b/target/linux/realtek/patches-5.4/301-gpio-add-rtl838x-driver.patch similarity index 73% rename from target/linux/rtl838x/patches-5.4/301-gpio-add-rtl838x-driver.patch rename to target/linux/realtek/patches-5.4/301-gpio-add-rtl838x-driver.patch index f911e5158b..4f5901d87f 100644 --- a/target/linux/rtl838x/patches-5.4/301-gpio-add-rtl838x-driver.patch +++ b/target/linux/realtek/patches-5.4/301-gpio-add-rtl838x-driver.patch @@ -1,9 +1,15 @@ --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -441,6 +441,12 @@ config GPIO_REG +@@ -441,6 +441,18 @@ config GPIO_REG A 32-bit single register GPIO fixed in/out implementation. This can be used to represent any register as a set of GPIO signals. ++config GPIO_RTL8231 ++ tristate "RTL8231 GPIO" ++ depends on GPIO_RTL838X ++ help ++ Say yes here to support Realtek RTL8231 GPIO expansion chips. ++ +config GPIO_RTL838X + tristate "RTL838X GPIO" + depends on RTL838X @@ -15,10 +21,11 @@ depends on MFD_SYSCON --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile -@@ -117,6 +117,7 @@ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t +@@ -117,6 +117,8 @@ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o obj-$(CONFIG_GPIO_REG) += gpio-reg.o ++obj-$(CONFIG_GPIO_RTL8231) += gpio-rtl8231.o +obj-$(CONFIG_GPIO_RTL838X) += gpio-rtl838x.o obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o diff --git a/target/linux/rtl838x/patches-5.4/400-mtd-add-rtl838x-spi-flash-driver.patch b/target/linux/realtek/patches-5.4/400-mtd-add-rtl838x-spi-flash-driver.patch similarity index 100% rename from target/linux/rtl838x/patches-5.4/400-mtd-add-rtl838x-spi-flash-driver.patch rename to target/linux/realtek/patches-5.4/400-mtd-add-rtl838x-spi-flash-driver.patch diff --git a/target/linux/realtek/patches-5.4/700-net-dsa-add-support-for-rtl838x-switch.patch b/target/linux/realtek/patches-5.4/700-net-dsa-add-support-for-rtl838x-switch.patch new file mode 100644 index 0000000000..20602076b2 --- /dev/null +++ b/target/linux/realtek/patches-5.4/700-net-dsa-add-support-for-rtl838x-switch.patch @@ -0,0 +1,22 @@ +Index: linux-5.4.77/drivers/net/dsa/Kconfig +=================================================================== +--- linux-5.4.77.orig/drivers/net/dsa/Kconfig ++++ linux-5.4.77/drivers/net/dsa/Kconfig +@@ -63,6 +63,8 @@ config NET_DSA_QCA8K + This enables support for the Qualcomm Atheros QCA8K Ethernet + switch chips. + ++source "drivers/net/dsa/rtl83xx/Kconfig" ++ + config NET_DSA_REALTEK_SMI + tristate "Realtek SMI Ethernet switch family support" + depends on NET_DSA +Index: linux-5.4.77/drivers/net/dsa/Makefile +=================================================================== +--- linux-5.4.77.orig/drivers/net/dsa/Makefile ++++ linux-5.4.77/drivers/net/dsa/Makefile +@@ -21,3 +21,4 @@ obj-y += b53/ + obj-y += microchip/ + obj-y += mv88e6xxx/ + obj-y += sja1105/ ++obj-y += rtl83xx/ diff --git a/target/linux/rtl838x/patches-5.4/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch b/target/linux/realtek/patches-5.4/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch similarity index 72% rename from target/linux/rtl838x/patches-5.4/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch rename to target/linux/realtek/patches-5.4/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch index d45c547803..9d4140c8e1 100644 --- a/target/linux/rtl838x/patches-5.4/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch +++ b/target/linux/realtek/patches-5.4/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch @@ -1,15 +1,17 @@ ---- a/net/dsa/tag_trailer.c -+++ b/net/dsa/tag_trailer.c +Index: linux-5.4.77/net/dsa/tag_trailer.c +=================================================================== +--- linux-5.4.77.orig/net/dsa/tag_trailer.c ++++ linux-5.4.77/net/dsa/tag_trailer.c @@ -44,7 +44,12 @@ static struct sk_buff *trailer_xmit(stru trailer = skb_put(nskb, 4); trailer[0] = 0x80; + -+#ifdef CONFIG_NET_DSA_RTL838X ++#ifdef CONFIG_NET_DSA_RTL83XX + trailer[1] = dp->index; +#else trailer[1] = 1 << dp->index; -+#endif /* CONFIG_NET_DSA_RTL838X */ ++#endif /* CONFIG_NET_DSA_RTL83XX */ trailer[2] = 0x10; trailer[3] = 0x00; @@ -18,7 +20,7 @@ trailer = skb_tail_pointer(skb) - 4; + -+#ifdef CONFIG_NET_DSA_RTL838X ++#ifdef CONFIG_NET_DSA_RTL83XX + if (trailer[0] != 0x80 || (trailer[1] & 0xe0) != 0x00 || + (trailer[2] & 0xef) != 0x00 || trailer[3] != 0x00) + return NULL; diff --git a/target/linux/rtl838x/patches-5.4/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch b/target/linux/realtek/patches-5.4/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch similarity index 100% rename from target/linux/rtl838x/patches-5.4/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch rename to target/linux/realtek/patches-5.4/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch diff --git a/target/linux/rtl838x/patches-5.4/702-net-ethernet-add-support-for-rtl838x-ethernet.patch b/target/linux/realtek/patches-5.4/702-net-ethernet-add-support-for-rtl838x-ethernet.patch similarity index 100% rename from target/linux/rtl838x/patches-5.4/702-net-ethernet-add-support-for-rtl838x-ethernet.patch rename to target/linux/realtek/patches-5.4/702-net-ethernet-add-support-for-rtl838x-ethernet.patch diff --git a/target/linux/rtl838x/patches-5.4/703-include-linux-add-phy-ops-for-rtl838x.patch b/target/linux/realtek/patches-5.4/703-include-linux-add-phy-ops-for-rtl838x.patch similarity index 100% rename from target/linux/rtl838x/patches-5.4/703-include-linux-add-phy-ops-for-rtl838x.patch rename to target/linux/realtek/patches-5.4/703-include-linux-add-phy-ops-for-rtl838x.patch diff --git a/target/linux/rtl838x/patches-5.4/704-drivers-net-phy-eee-support-for-rtl838x.patch b/target/linux/realtek/patches-5.4/704-drivers-net-phy-eee-support-for-rtl838x.patch similarity index 100% rename from target/linux/rtl838x/patches-5.4/704-drivers-net-phy-eee-support-for-rtl838x.patch rename to target/linux/realtek/patches-5.4/704-drivers-net-phy-eee-support-for-rtl838x.patch diff --git a/target/linux/realtek/patches-5.4/705-add-rtl-phy.patch b/target/linux/realtek/patches-5.4/705-add-rtl-phy.patch new file mode 100644 index 0000000000..5c5d08fe9f --- /dev/null +++ b/target/linux/realtek/patches-5.4/705-add-rtl-phy.patch @@ -0,0 +1,13 @@ +Index: linux-5.4.77/drivers/net/phy/Makefile +=================================================================== +--- linux-5.4.77.orig/drivers/net/phy/Makefile ++++ linux-5.4.77/drivers/net/phy/Makefile +@@ -101,7 +101,7 @@ obj-$(CONFIG_MICROSEMI_PHY) += mscc.o + obj-$(CONFIG_NATIONAL_PHY) += national.o + obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o + obj-$(CONFIG_QSEMI_PHY) += qsemi.o +-obj-$(CONFIG_REALTEK_PHY) += realtek.o ++obj-$(CONFIG_REALTEK_PHY) += realtek.o rtl83xx-phy.o + obj-$(CONFIG_RENESAS_PHY) += uPD60620.o + obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o + obj-$(CONFIG_SMSC_PHY) += smsc.o diff --git a/target/linux/realtek/patches-5.4/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch b/target/linux/realtek/patches-5.4/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch new file mode 100644 index 0000000000..c74f78b0b0 --- /dev/null +++ b/target/linux/realtek/patches-5.4/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch @@ -0,0 +1,11 @@ +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -188,7 +188,7 @@ + #define PHY_INIT_TIMEOUT 100000 + #define PHY_FORCE_TIMEOUT 10 + +-#define PHY_MAX_ADDR 32 ++#define PHY_MAX_ADDR 64 + + /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ + #define PHY_ID_FMT "%s:%02x" diff --git a/target/linux/rtl838x/profiles/00-default.mk b/target/linux/realtek/profiles/00-default.mk similarity index 100% rename from target/linux/rtl838x/profiles/00-default.mk rename to target/linux/realtek/profiles/00-default.mk diff --git a/target/linux/rtl838x/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h b/target/linux/rtl838x/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h deleted file mode 100644 index e821111c5d..0000000000 --- a/target/linux/rtl838x/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -#ifndef __ASM_MACH_RTL838X_IRQ_H -#define __ASM_MACH_RTL838X_IRQ_H - -#define MIPS_CPU_IRQ_BASE 0 -#define NR_IRQS 64 - -#include_next - -#endif /* __ASM_MACH_ATH79_IRQ_H */ diff --git a/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/irq.c b/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/irq.c deleted file mode 100644 index 40e1269c92..0000000000 --- a/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/irq.c +++ /dev/null @@ -1,203 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Realtek RTL838X architecture specific IRQ handling - * - * Copyright (C) 2020 B. Koblitz - * based on the original BSP - * Copyright (C) 2006-2012 Tony Wu (tonywu@realtek.com) - * - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define icu_r32(reg) rtl838x_r32(soc_info.icu_base + reg) -#define icu_w32(val, reg) rtl838x_w32(val, soc_info.icu_base + reg) -#define icu_w32_mask(clear, set, reg) rtl838x_w32_mask(clear, set, soc_info.icu_base + reg) - -static DEFINE_RAW_SPINLOCK(irq_lock); - -extern irqreturn_t c0_compare_interrupt(int irq, void *dev_id); - - -static void rtl838x_ictl_enable_irq(struct irq_data *i) -{ - unsigned long flags; - - raw_spin_lock_irqsave(&irq_lock, flags); - icu_w32_mask(0, 1 << i->irq, GIMR); - raw_spin_unlock_irqrestore(&irq_lock, flags); -} - -static void rtl838x_ictl_disable_irq(struct irq_data *i) -{ - unsigned long flags; - - raw_spin_lock_irqsave(&irq_lock, flags); - icu_w32_mask(1 << i->irq, 0, GIMR); - raw_spin_unlock_irqrestore(&irq_lock, flags); -} - -static void rtl838x_ictl_eoi_irq(struct irq_data *i) -{ - unsigned long flags; - - raw_spin_lock_irqsave(&irq_lock, flags); - icu_w32_mask(0, 1 << i->irq, GIMR); - raw_spin_unlock_irqrestore(&irq_lock, flags); -} - -static struct irq_chip rtl838x_ictl_irq = { - .name = "RTL83xx", - .irq_enable = rtl838x_ictl_enable_irq, - .irq_disable = rtl838x_ictl_disable_irq, - .irq_ack = rtl838x_ictl_disable_irq, - .irq_mask = rtl838x_ictl_disable_irq, - .irq_unmask = rtl838x_ictl_enable_irq, - .irq_eoi = rtl838x_ictl_eoi_irq, -}; - -/* - * RTL8390/80/28 Interrupt Scheme - * - * Source IRQ CPU INT - * -------- ------- ------- - * UART0 31 IP3 - * UART1 30 IP2 - * TIMER0 29 IP6 - * TIMER1 28 IP2 - * OCPTO 27 IP2 - * HLXTO 26 IP2 - * SLXTO 25 IP2 - * NIC 24 IP5 - * GPIO_ABCD 23 IP5 - * SWCORE 20 IP4 - */ - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending, ext_int; - - pending = read_c0_cause(); - - if (pending & CAUSEF_IP7) { - c0_compare_interrupt(7, NULL); - } else if (pending & CAUSEF_IP6) { - do_IRQ(TC0_IRQ); - } else if (pending & CAUSEF_IP5) { - ext_int = icu_r32(GIMR) & icu_r32(GISR); - if (ext_int & NIC_IP) - do_IRQ(NIC_IRQ); - else if (ext_int & GPIO_ABCD_IP) - do_IRQ(GPIO_ABCD_IRQ); - else if ((ext_int & GPIO_EFGH_IP) && (soc_info.family == RTL8328_FAMILY_ID)) - do_IRQ(GPIO_EFGH_IRQ); - else - spurious_interrupt(); - } else if (pending & CAUSEF_IP4) { - do_IRQ(SWCORE_IRQ); - } else if (pending & CAUSEF_IP3) { - do_IRQ(UART0_IRQ); - } else if (pending & CAUSEF_IP2) { - ext_int = icu_r32(GIMR) & icu_r32(GISR); - if (ext_int & TC1_IP) - do_IRQ(TC1_IRQ); - else if (ext_int & UART1_IP) - do_IRQ(UART1_IRQ); - else - spurious_interrupt(); - } else { - spurious_interrupt(); - } -} - -static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) -{ - irq_set_chip_and_handler(hw, &rtl838x_ictl_irq, handle_level_irq); - - return 0; -} - -static const struct irq_domain_ops irq_domain_ops = { - .xlate = irq_domain_xlate_onecell, - .map = intc_map, -}; - -int __init icu_of_init(struct device_node *node, struct device_node *parent) -{ - int i; - struct irq_domain *domain; - struct resource res; - - pr_info("Found Interrupt controller: %s (%s)\n", node->name, node->full_name); - if (of_address_to_resource(node, 0, &res)) - panic("Failed to get icu memory range"); - - if (!request_mem_region(res.start, resource_size(&res), res.name)) - pr_err("Failed to request icu memory\n"); - - soc_info.icu_base = ioremap(res.start, resource_size(&res)); - pr_info("ICU Memory: %08x\n", (u32)soc_info.icu_base); - - mips_cpu_irq_init(); - - domain = irq_domain_add_simple(node, 32, 0, &irq_domain_ops, NULL); - - /* Setup all external HW irqs */ - for (i = 8; i < RTL838X_IRQ_ICTL_NUM; i++) { - irq_domain_associate(domain, i, i); - irq_set_chip_and_handler(RTL838X_IRQ_ICTL_BASE + i, - &rtl838x_ictl_irq, handle_level_irq); - } - - if (request_irq(RTL838X_ICTL1_IRQ, no_action, IRQF_NO_THREAD, - "IRQ cascade 1", NULL)) { - pr_err("request_irq() cascade 1 for irq %d failed\n", RTL838X_ICTL1_IRQ); - } - if (request_irq(RTL838X_ICTL2_IRQ, no_action, IRQF_NO_THREAD, - "IRQ cascade 2", NULL)) { - pr_err("request_irq() cascade 2 for irq %d failed\n", RTL838X_ICTL2_IRQ); - } - if (request_irq(RTL838X_ICTL3_IRQ, no_action, IRQF_NO_THREAD, - "IRQ cascade 3", NULL)) { - pr_err("request_irq() cascade 3 for irq %d failed\n", RTL838X_ICTL3_IRQ); - } - if (request_irq(RTL838X_ICTL4_IRQ, no_action, IRQF_NO_THREAD, - "IRQ cascade 4", NULL)) { - pr_err("request_irq() cascade 4 for irq %d failed\n", RTL838X_ICTL4_IRQ); - } - if (request_irq(RTL838X_ICTL5_IRQ, no_action, IRQF_NO_THREAD, - "IRQ cascade 5", NULL)) { - pr_err("request_irq() cascade 5 for irq %d failed\n", RTL838X_ICTL5_IRQ); - } - - /* Set up interrupt routing scheme */ - icu_w32(IRR0_SETTING, IRR0); - if (soc_info.family == RTL8380_FAMILY_ID) - icu_w32(IRR1_SETTING_RTL838X, IRR1); - else - icu_w32(IRR1_SETTING_RTL839X, IRR1); - icu_w32(IRR2_SETTING, IRR2); - icu_w32(IRR3_SETTING, IRR3); - - /* Enable timer0 and uart0 interrupts */ - icu_w32(TC0_IE | UART0_IE, GIMR); - return 0; -} - -void __init arch_init_irq(void) -{ - /* do board-specific irq initialization */ - irqchip_init(); -} - -IRQCHIP_DECLARE(mips_cpu_intc, "rtl838x,icu", icu_of_init); diff --git a/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/serial.c b/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/serial.c deleted file mode 100644 index 9d22f6f9e1..0000000000 --- a/target/linux/rtl838x/files-5.4/arch/mips/rtl838x/serial.c +++ /dev/null @@ -1,100 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * 8250 serial console setup for the Realtek RTL838X SoC - * - * based on the original BSP by - * Copyright (C) 2006-2012 Tony Wu (tonywu@realtek.com) - * - * Copyright (C) 2020 B. Koblitz - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -extern char arcs_cmdline[]; - -int __init rtl838x_serial_init(void) -{ -#ifdef CONFIG_SERIAL_8250 - int ret; - struct uart_port p; - unsigned long baud = 0; - int err; - char parity = '\0', bits = '\0', flow = '\0'; - char *s; - struct device_node *dn; - - dn = of_find_compatible_node(NULL, NULL, "ns16550a"); - if (dn) { - pr_info("Found NS16550a: %s (%s)\n", dn->name, dn->full_name); - dn = of_find_compatible_node(dn, NULL, "ns16550a"); - if (dn && of_device_is_available(dn) && soc_info.family == RTL8380_FAMILY_ID) { - /* Enable UART1 on RTL838x */ - pr_info("Enabling uart1\n"); - sw_w32(0x10, RTL838X_GMII_INTF_SEL); - } - } else { - pr_err("No NS16550a UART found!"); - return -ENODEV; - } - - s = strstr(arcs_cmdline, "console=ttyS0,"); - if (s) { - s += 14; - err = kstrtoul(s, 10, &baud); - if (err) - baud = 0; - while (isdigit(*s)) - s++; - if (*s == ',') - s++; - if (*s) - parity = *s++; - if (*s == ',') - s++; - if (*s) - bits = *s++; - if (*s == ',') - s++; - if (*s == 'h') - flow = 'r'; - } - - if (baud == 0) { - baud = 38400; - pr_warn("Using default baud rate: %lu\n", baud); - } - if (parity != 'n' && parity != 'o' && parity != 'e') - parity = 'n'; - if (bits != '7' && bits != '8') - bits = '8'; - - memset(&p, 0, sizeof(p)); - - p.type = PORT_16550A; - p.membase = (unsigned char *) RTL838X_UART0_BASE; - p.irq = RTL838X_UART0_IRQ; - p.uartclk = SYSTEM_FREQ - (24 * baud); - p.flags = UPF_SKIP_TEST | UPF_LOW_LATENCY | UPF_FIXED_TYPE; - p.iotype = UPIO_MEM; - p.regshift = 2; - p.fifosize = 1; - - /* Call early_serial_setup() here, to set up 8250 console driver */ - if (early_serial_setup(&p) != 0) - ret = 1; -#endif - return 0; -} diff --git a/target/linux/rtl838x/files-5.4/drivers/gpio/gpio-rtl838x.c b/target/linux/rtl838x/files-5.4/drivers/gpio/gpio-rtl838x.c deleted file mode 100644 index 00098715fb..0000000000 --- a/target/linux/rtl838x/files-5.4/drivers/gpio/gpio-rtl838x.c +++ /dev/null @@ -1,806 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include -#include -#include -#include - -/* RTL8231 registers for LED control */ -#define RTL8231_LED_FUNC0 0x0000 -#define RTL8231_GPIO_PIN_SEL(gpio) ((0x0002) + ((gpio) >> 4)) -#define RTL8231_GPIO_DIR(gpio) ((0x0005) + ((gpio) >> 4)) -#define RTL8231_GPIO_DATA(gpio) ((0x001C) + ((gpio) >> 4)) -#define RTL8231_GPIO_PIN_SEL0 0x0002 -#define RTL8231_GPIO_PIN_SEL1 0x0003 -#define RTL8231_GPIO_PIN_SEL2 0x0004 -#define RTL8231_GPIO_IO_SEL0 0x0005 -#define RTL8231_GPIO_IO_SEL1 0x0006 -#define RTL8231_GPIO_IO_SEL2 0x0007 - -#define MDC_WAIT { int i; for (i = 0; i < 2; i++); } -#define I2C_WAIT { int i; for (i = 0; i < 5; i++); } - -struct rtl838x_gpios { - struct gpio_chip gc; - u32 id; - struct device *dev; - int irq; - int bus_id; - int num_leds; - int min_led; - int leds_per_port; - u32 led_mode; - u16 rtl8381_phy_id; - int smi_clock; - int smi_data; - int i2c_sda; - int i2c_sdc; -}; - -u32 rtl838x_rtl8231_read(u8 bus_id, u32 reg) -{ - u32 t = 0; - - reg &= 0x1f; - bus_id &= 0x1f; - - /* Calculate read register address */ - t = (bus_id << 2) | (reg << 7); - - mutex_lock(&smi_lock); - /* Set execution bit: cleared when operation completed */ - t |= 1; - sw_w32(t, RTL838X_EXT_GPIO_INDRT_ACCESS); - do { /* TODO: Return 0x80000000 if timeout */ - t = sw_r32(RTL838X_EXT_GPIO_INDRT_ACCESS); - } while (t & 1); - pr_debug("%s: %x, %x, %x\n", __func__, bus_id, reg, (t & 0xffff0000) >> 16); - - mutex_unlock(&smi_lock); - return (t & 0xffff0000) >> 16; -} - -int rtl838x_rtl8231_write(u8 bus_id, u32 reg, u32 data) -{ - u32 t = 0; - - pr_debug("%s: %x, %x, %x\n", __func__, bus_id, reg, data); - data &= 0xffff; - reg &= 0x1f; - bus_id &= 0x1f; - - mutex_lock(&smi_lock); - t = (bus_id << 2) | (reg << 7) | (data << 16); - /* Set write bit */ - t |= 2; - - /* Set execution bit: cleared when operation completed */ - t |= 1; - sw_w32(t, RTL838X_EXT_GPIO_INDRT_ACCESS); - do { /* TODO: Return -1 if timeout */ - t = sw_r32(RTL838X_EXT_GPIO_INDRT_ACCESS); - } while (t & 1); - - mutex_unlock(&smi_lock); - return 0; -} - -static int rtl8231_pin_dir(u8 bus_id, u32 gpio, u32 dir) -{ - /* dir 1: input - * dir 0: output - */ - - u32 v; - int pin_sel_addr = RTL8231_GPIO_PIN_SEL(gpio); - int pin_dir_addr = RTL8231_GPIO_DIR(gpio); - int pin = gpio % 16; - int dpin = pin; - - if (gpio > 31) { - dpin = pin << 5; - pin_dir_addr = pin_sel_addr; - } - - /* Select GPIO function for pin */ - v = rtl838x_rtl8231_read(bus_id, pin_sel_addr); - if (v & 0x80000000) { - pr_err("Error reading RTL8231\n"); - return -1; - } - rtl838x_rtl8231_write(bus_id, pin_sel_addr, v | (1 << pin)); - - v = rtl838x_rtl8231_read(bus_id, pin_dir_addr); - if (v & 0x80000000) { - pr_err("Error reading RTL8231\n"); - return -1; - } - rtl838x_rtl8231_write(bus_id, pin_dir_addr, - (v & ~(1 << dpin)) | (dir << dpin)); - return 0; -} - -static int rtl8231_pin_dir_get(u8 bus_id, u32 gpio, u32 *dir) -{ - /* dir 1: input - * dir 0: output - */ - - u32 v; - int pin_dir_addr = RTL8231_GPIO_DIR(gpio); - int pin = gpio % 16; - - if (gpio > 31) { - pin_dir_addr = RTL8231_GPIO_PIN_SEL(gpio); - pin = pin << 5; - } - - v = rtl838x_rtl8231_read(bus_id, pin_dir_addr); - if (v & (1 << pin)) - *dir = 1; - else - *dir = 0; - return 0; -} - -static int rtl8231_pin_set(u8 bus_id, u32 gpio, u32 data) -{ - u32 v = rtl838x_rtl8231_read(bus_id, RTL8231_GPIO_DATA(gpio)); - - if (v & 0x80000000) { - pr_err("Error reading RTL8231\n"); - return -1; - } - rtl838x_rtl8231_write(bus_id, RTL8231_GPIO_DATA(gpio), - (v & ~(1 << (gpio % 16))) | (data << (gpio % 16))); - return 0; -} - -static int rtl8231_pin_get(u8 bus_id, u32 gpio, u16 *state) -{ - u32 v = rtl838x_rtl8231_read(bus_id, RTL8231_GPIO_DATA(gpio)); - - if (v & 0x80000000) { - pr_err("Error reading RTL8231\n"); - return -1; - } - - *state = v & 0xffff; - return 0; -} - -static int rtl838x_direction_input(struct gpio_chip *gc, unsigned int offset) -{ - struct rtl838x_gpios *gpios = gpiochip_get_data(gc); - - pr_debug("%s: %d\n", __func__, offset); - - if (offset < 32) { - rtl838x_w32_mask(1 << offset, 0, RTL838X_GPIO_PABC_DIR); - return 0; - } - - /* Internal LED driver does not support input */ - if (offset >= 32 && offset < 64) - return -ENOTSUPP; - - if (offset >= 64 && offset < 100 && gpios->bus_id >= 0) - return rtl8231_pin_dir(gpios->bus_id, offset - 64, 1); - - return -ENOTSUPP; -} - -static int rtl838x_direction_output(struct gpio_chip *gc, unsigned int offset, int value) -{ - struct rtl838x_gpios *gpios = gpiochip_get_data(gc); - - pr_debug("%s: %d\n", __func__, offset); - if (offset < 32) - rtl838x_w32_mask(0, 1 << offset, RTL838X_GPIO_PABC_DIR); - - /* LED for PWR and SYS driver is direction output by default */ - if (offset >= 32 && offset < 64) - return 0; - - if (offset >= 64 && offset < 100 && gpios->bus_id >= 0) - return rtl8231_pin_dir(gpios->bus_id, offset - 64, 0); - return 0; -} - -static int rtl838x_get_direction(struct gpio_chip *gc, unsigned int offset) -{ - u32 v = 0; - struct rtl838x_gpios *gpios = gpiochip_get_data(gc); - - pr_debug("%s: %d\n", __func__, offset); - if (offset < 32) { - v = rtl838x_r32(RTL838X_GPIO_PABC_DIR); - if (v & (1 << offset)) - return 0; - return 1; - } - - /* LED driver for PWR and SYS is direction output by default */ - if (offset >= 32 && offset < 64) - return 0; - - if (offset >= 64 && offset < 100 && gpios->bus_id >= 0) { - rtl8231_pin_dir_get(gpios->bus_id, offset - 64, &v); - return v; - } - - return 0; -} - -static int rtl838x_gpio_get(struct gpio_chip *gc, unsigned int offset) -{ - u32 v; - u16 state = 0; - int bit; - struct rtl838x_gpios *gpios = gpiochip_get_data(gc); - - pr_debug("%s: %d\n", __func__, offset); - - /* Internal GPIO of the RTL8380 */ - if (offset < 32) { - v = rtl838x_r32(RTL838X_GPIO_PABC_DATA); - if (v & (1 << offset)) - return 1; - return 0; - } - - /* LED driver for PWR and SYS */ - if (offset >= 32 && offset < 64) { - v = sw_r32(RTL838X_LED_GLB_CTRL); - if (v & (1 << (offset-32))) - return 1; - return 0; - } - - /* Indirect access GPIO with RTL8231 */ - if (offset >= 64 && offset < 100 && gpios->bus_id >= 0) { - rtl8231_pin_get(gpios->bus_id, offset - 64, &state); - if (state & (1 << (offset % 16))) - return 1; - return 0; - } - - bit = (offset - 100) % 32; - if (offset >= 100 && offset < 132) { - if (sw_r32(RTL838X_LED1_SW_P_EN_CTRL) & (1 << bit)) - return 1; - return 0; - } - if (offset >= 132 && offset < 164) { - if (sw_r32(RTL838X_LED1_SW_P_EN_CTRL) & (1 << bit)) - return 1; - return 0; - } - if (offset >= 164 && offset < 196) { - if (sw_r32(RTL838X_LED1_SW_P_EN_CTRL) & (1 << bit)) - return 1; - return 0; - } - return 0; -} - -void rtl838x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) -{ - int bit; - struct rtl838x_gpios *gpios = gpiochip_get_data(gc); - - pr_debug("rtl838x_set: %d, value: %d\n", offset, value); - /* Internal GPIO of the RTL8380 */ - if (offset < 32) { - if (value) - rtl838x_w32_mask(0, 1 << offset, RTL838X_GPIO_PABC_DATA); - else - rtl838x_w32_mask(1 << offset, 0, RTL838X_GPIO_PABC_DATA); - } - - /* LED driver for PWR and SYS */ - if (offset >= 32 && offset < 64) { - bit = offset - 32; - if (value) - sw_w32_mask(0, 1 << bit, RTL838X_LED_GLB_CTRL); - else - sw_w32_mask(1 << bit, 0, RTL838X_LED_GLB_CTRL); - return; - } - - /* Indirect access GPIO with RTL8231 */ - if (offset >= 64 && offset < 100 && gpios->bus_id >= 0) { - rtl8231_pin_set(gpios->bus_id, offset - 64, value); - return; - } - - bit = (offset - 100) % 32; - /* First Port-LED */ - if (offset >= 100 && offset < 132 - && offset >= (100 + gpios->min_led) - && offset < (100 + gpios->min_led + gpios->num_leds)) { - if (value) - sw_w32_mask(7, 5, RTL838X_LED_SW_P_CTRL(bit)); - else - sw_w32_mask(7, 0, RTL838X_LED_SW_P_CTRL(bit)); - } - if (offset >= 132 && offset < 164 - && offset >= (132 + gpios->min_led) - && offset < (132 + gpios->min_led + gpios->num_leds)) { - if (value) - sw_w32_mask(7 << 3, 5 << 3, RTL838X_LED_SW_P_CTRL(bit)); - else - sw_w32_mask(7 << 3, 0, RTL838X_LED_SW_P_CTRL(bit)); - } - if (offset >= 164 && offset < 196 - && offset >= (164 + gpios->min_led) - && offset < (164 + gpios->min_led + gpios->num_leds)) { - if (value) - sw_w32_mask(7 << 6, 5 << 6, RTL838X_LED_SW_P_CTRL(bit)); - else - sw_w32_mask(7 << 6, 0, RTL838X_LED_SW_P_CTRL(bit)); - } - __asm__ volatile ("sync"); -} - -int rtl8231_init(struct rtl838x_gpios *gpios) -{ - uint32_t v; - u8 bus_id = gpios->bus_id; - - pr_info("%s called\n", __func__); - - /* Enable RTL8231 indirect access mode */ - sw_w32_mask(0, 1, RTL838X_EXTRA_GPIO_CTRL); - sw_w32_mask(3, 1, RTL838X_DMY_REG5); - - /* Enable RTL8231 via GPIO_A1 line */ - rtl838x_w32_mask(0, 1 << RTL838X_GPIO_A1, RTL838X_GPIO_PABC_DIR); - rtl838x_w32_mask(0, 1 << RTL838X_GPIO_A1, RTL838X_GPIO_PABC_DATA); - mdelay(50); /* wait 50ms for reset */ - - /*Select GPIO functionality for pins 0-15, 16-31 and 32-37 */ - rtl838x_rtl8231_write(bus_id, RTL8231_GPIO_PIN_SEL(0), 0xffff); - rtl838x_rtl8231_write(bus_id, RTL8231_GPIO_PIN_SEL(16), 0xffff); - rtl838x_rtl8231_write(bus_id, RTL8231_GPIO_PIN_SEL2, 0x03ff); - - v = rtl838x_rtl8231_read(bus_id, RTL8231_LED_FUNC0); - pr_info("RTL8231 led function now: %x\n", v); - - return 0; -} - -static void smi_write_bit(struct rtl838x_gpios *gpios, u32 bit) -{ - if (bit) - rtl838x_w32_mask(0, 1 << gpios->smi_data, RTL838X_GPIO_PABC_DATA); - else - rtl838x_w32_mask(1 << gpios->smi_data, 0, RTL838X_GPIO_PABC_DATA); - - MDC_WAIT; - rtl838x_w32_mask(1 << gpios->smi_clock, 0, RTL838X_GPIO_PABC_DATA); - MDC_WAIT; - rtl838x_w32_mask(0, 1 << gpios->smi_clock, RTL838X_GPIO_PABC_DATA); -} - -static int smi_read_bit(struct rtl838x_gpios *gpios) -{ - u32 v; - - MDC_WAIT; - rtl838x_w32_mask(1 << gpios->smi_clock, 0, RTL838X_GPIO_PABC_DATA); - MDC_WAIT; - rtl838x_w32_mask(0, 1 << gpios->smi_clock, RTL838X_GPIO_PABC_DATA); - - v = rtl838x_r32(RTL838X_GPIO_PABC_DATA); - if (v & (1 << gpios->smi_data)) - return 1; - return 0; -} - -/* Tri-state of MDIO line */ -static void smi_z(struct rtl838x_gpios *gpios) -{ - /* MDIO pin to input */ - rtl838x_w32_mask(1 << gpios->smi_data, 0, RTL838X_GPIO_PABC_DIR); - MDC_WAIT; - rtl838x_w32_mask(1 << gpios->smi_clock, 0, RTL838X_GPIO_PABC_DATA); - MDC_WAIT; - rtl838x_w32_mask(0, 1 << gpios->smi_clock, RTL838X_GPIO_PABC_DATA); -} - -static void smi_write_bits(struct rtl838x_gpios *gpios, u32 data, int len) -{ - while (len) { - len--; - smi_write_bit(gpios, data & (1 << len)); - } -} - -static void smi_read_bits(struct rtl838x_gpios *gpios, int len, u32 *data) -{ - u32 v = 0; - - while (len) { - len--; - v <<= 1; - v |= smi_read_bit(gpios); - } - *data = v; -} - -/* Bit-banged verson of SMI write access, caller must hold smi_lock */ -int rtl8380_smi_write(struct rtl838x_gpios *gpios, u16 reg, u32 data) -{ - u16 bus_id = gpios->bus_id; - - /* Set clock and data pins on RTL838X to output */ - rtl838x_w32_mask(0, 1 << gpios->smi_clock, RTL838X_GPIO_PABC_DIR); - rtl838x_w32_mask(0, 1 << gpios->smi_data, RTL838X_GPIO_PABC_DIR); - - /* Write start bits */ - smi_write_bits(gpios, 0xffffffff, 32); - - smi_write_bits(gpios, 0x5, 4); /* ST and write OP */ - - smi_write_bits(gpios, bus_id, 5); /* 5 bits: phy address */ - smi_write_bits(gpios, reg, 5); /* 5 bits: register address */ - - smi_write_bits(gpios, 0x2, 2); /* TURNAROUND */ - - smi_write_bits(gpios, data, 16); /* 16 bits: data*/ - - smi_z(gpios); - - return 0; -} - -/* Bit-banged verson of SMI read access, caller must hold smi_lock */ -int rtl8380_smi_read(struct rtl838x_gpios *gpios, u16 reg, u32 *data) -{ - u16 bus_id = gpios->bus_id; - - /* Set clock and data pins on RTL838X to output */ - rtl838x_w32_mask(0, 1 << gpios->smi_clock, RTL838X_GPIO_PABC_DIR); - rtl838x_w32_mask(0, 1 << gpios->smi_data, RTL838X_GPIO_PABC_DIR); - - /* Write start bits */ - smi_write_bits(gpios, 0xffffffff, 32); - - smi_write_bits(gpios, 0x6, 4); /* ST and read OP */ - - smi_write_bits(gpios, bus_id, 5); /* 5 bits: phy address */ - smi_write_bits(gpios, reg, 5); /* 5 bits: register address */ - - smi_z(gpios); /* TURNAROUND */ - - smi_read_bits(gpios, 16, data); - return 0; -} - -static void i2c_pin_set(struct rtl838x_gpios *gpios, int pin, u32 data) -{ - u32 v; - - rtl8380_smi_read(gpios, RTL8231_GPIO_DATA(pin), &v); - if (!data) - v &= ~(1 << (pin % 16)); - else - v |= (1 << (pin % 16)); - rtl8380_smi_write(gpios, RTL8231_GPIO_DATA(pin), v); -} - -static void i2c_pin_get(struct rtl838x_gpios *gpios, int pin, u32 *data) -{ - u32 v; - - rtl8380_smi_read(gpios, RTL8231_GPIO_DATA(pin), &v); - if (v & (1 << (pin % 16))) { - *data = 1; - return; - } - *data = 0; -} - -static void i2c_pin_dir(struct rtl838x_gpios *gpios, int pin, u16 direction) -{ - u32 v; - - rtl8380_smi_read(gpios, RTL8231_GPIO_DIR(pin), &v); - if (direction) // Output - v &= ~(1 << (pin % 16)); - else - v |= (1 << (pin % 16)); - rtl8380_smi_write(gpios, RTL8231_GPIO_DIR(pin), v); -} - -static void i2c_start(struct rtl838x_gpios *gpios) -{ - i2c_pin_dir(gpios, gpios->i2c_sda, 0); /* Output */ - i2c_pin_dir(gpios, gpios->i2c_sdc, 0); /* Output */ - I2C_WAIT; - i2c_pin_set(gpios, gpios->i2c_sdc, 1); - I2C_WAIT; - i2c_pin_set(gpios, gpios->i2c_sda, 1); - I2C_WAIT; - i2c_pin_set(gpios, gpios->i2c_sda, 0); - I2C_WAIT; - i2c_pin_set(gpios, gpios->i2c_sdc, 0); - I2C_WAIT; -} - -static void i2c_stop(struct rtl838x_gpios *gpios) -{ - I2C_WAIT; - i2c_pin_set(gpios, gpios->i2c_sdc, 1); - i2c_pin_set(gpios, gpios->i2c_sda, 0); - I2C_WAIT; - - i2c_pin_set(gpios, gpios->i2c_sda, 1); - I2C_WAIT; - i2c_pin_set(gpios, gpios->i2c_sdc, 0); - - i2c_pin_dir(gpios, gpios->i2c_sda, 1); /* Input */ - i2c_pin_dir(gpios, gpios->i2c_sdc, 1); /* Input */ -} - -static void i2c_read_bits(struct rtl838x_gpios *gpios, int len, u32 *data) -{ - u32 v = 0, t; - - while (len) { - len--; - v <<= 1; - i2c_pin_set(gpios, gpios->i2c_sdc, 1); - I2C_WAIT; - i2c_pin_get(gpios, gpios->i2c_sda, &t); - v |= t; - i2c_pin_set(gpios, gpios->i2c_sdc, 0); - I2C_WAIT; - } - *data = v; -} - -static void i2c_write_bits(struct rtl838x_gpios *gpios, u32 data, int len) -{ - while (len) { - len--; - i2c_pin_set(gpios, gpios->i2c_sda, data & (1 << len)); - I2C_WAIT; - i2c_pin_set(gpios, gpios->i2c_sdc, 1); - I2C_WAIT; - i2c_pin_set(gpios, gpios->i2c_sdc, 0); - I2C_WAIT; - } -} - -/* This initializes direct external GPIOs via the RTL8231 */ -int rtl8380_rtl8321_init(struct rtl838x_gpios *gpios) -{ - u32 v; - int mdc = gpios->smi_clock; - int mdio = gpios->smi_data; - - pr_info("Configuring SMI: Clock %d, Data %d\n", mdc, mdio); - sw_w32_mask(0, 0x2, RTL838X_IO_DRIVING_ABILITY_CTRL); - - /* Enter simulated GPIO mode */ - sw_w32_mask(1, 0, RTL838X_EXTRA_GPIO_CTRL); - - /* MDIO clock to 2.6MHz */ - sw_w32_mask(0x3 << 8, 0, RTL838X_EXTRA_GPIO_CTRL); - - /* Configure SMI clock and data GPIO pins */ - rtl838x_w32_mask((1 << mdc) | (1 << mdio), 0, RTL838X_GPIO_PABC_CNR); - rtl838x_w32_mask(0, (1 << mdc) | (1 << mdio), RTL838X_GPIO_PABC_DIR); - - rtl8380_smi_write(gpios, RTL8231_GPIO_PIN_SEL0, 0xffff); - rtl8380_smi_write(gpios, RTL8231_GPIO_PIN_SEL1, 0xffff); - rtl8380_smi_read(gpios, RTL8231_GPIO_PIN_SEL2, &v); - v |= 0x1f; - rtl8380_smi_write(gpios, RTL8231_GPIO_PIN_SEL2, v); - - rtl8380_smi_write(gpios, RTL8231_GPIO_IO_SEL0, 0xffff); - rtl8380_smi_write(gpios, RTL8231_GPIO_IO_SEL1, 0xffff); - rtl8380_smi_read(gpios, RTL8231_GPIO_IO_SEL2, &v); - v |= 0x1f << 5; - rtl8380_smi_write(gpios, RTL8231_GPIO_PIN_SEL2, v); - - return 0; -} - -void rtl8380_led_test(u32 mask) -{ - int i; - u32 mode_sel = sw_r32(RTL838X_LED_MODE_SEL); - u32 led_gbl = sw_r32(RTL838X_LED_GLB_CTRL); - u32 led_p_en = sw_r32(RTL838X_LED_P_EN_CTRL); - - /* 2 Leds for ports 0-23 and 24-27, 3 would be 0x7 */ - sw_w32_mask(0x3f, 0x3 | (0x3 << 3), RTL838X_LED_GLB_CTRL); - /* Enable all leds */ - sw_w32(0xFFFFFFF, RTL838X_LED_P_EN_CTRL); - - /* Enable software control of all leds */ - sw_w32(0xFFFFFFF, RTL838X_LED_SW_CTRL); - sw_w32(0xFFFFFFF, RTL838X_LED0_SW_P_EN_CTRL); - sw_w32(0xFFFFFFF, RTL838X_LED1_SW_P_EN_CTRL); - sw_w32(0x0000000, RTL838X_LED2_SW_P_EN_CTRL); - - for (i = 0; i < 28; i++) { - if (mask & (1 << i)) - sw_w32(5 | (5 << 3) | (5 << 6), - RTL838X_LED_SW_P_CTRL(i)); - } - msleep(3000); - - sw_w32(led_p_en, RTL838X_LED_P_EN_CTRL); - /* Disable software control of all leds */ - sw_w32(0x0000000, RTL838X_LED_SW_CTRL); - sw_w32(0x0000000, RTL838X_LED0_SW_P_EN_CTRL); - sw_w32(0x0000000, RTL838X_LED1_SW_P_EN_CTRL); - sw_w32(0x0000000, RTL838X_LED2_SW_P_EN_CTRL); - - sw_w32(led_gbl, RTL838X_LED_GLB_CTRL); - sw_w32(mode_sel, RTL838X_LED_MODE_SEL); -} - -void take_port_leds(struct rtl838x_gpios *gpios) -{ - int leds_per_port = gpios->leds_per_port; - int mode = gpios->led_mode; - - pr_info("%s, %d, %x\n", __func__, leds_per_port, mode); - pr_debug("Bootloader settings: %x %x %x\n", - sw_r32(RTL838X_LED0_SW_P_EN_CTRL), - sw_r32(RTL838X_LED1_SW_P_EN_CTRL), - sw_r32(RTL838X_LED2_SW_P_EN_CTRL) - ); - - pr_debug("led glb: %x, sel %x\n", - sw_r32(RTL838X_LED_GLB_CTRL), sw_r32(RTL838X_LED_MODE_SEL)); - pr_debug("RTL838X_LED_P_EN_CTRL: %x", sw_r32(RTL838X_LED_P_EN_CTRL)); - pr_debug("RTL838X_LED_MODE_CTRL: %x", sw_r32(RTL838X_LED_MODE_CTRL)); - - sw_w32_mask(3, 0, RTL838X_LED_MODE_SEL); - sw_w32(mode, RTL838X_LED_MODE_CTRL); - - /* Enable software control of all leds */ - sw_w32(0xFFFFFFF, RTL838X_LED_SW_CTRL); - sw_w32(0xFFFFFFF, RTL838X_LED_P_EN_CTRL); - - sw_w32(0x0000000, RTL838X_LED0_SW_P_EN_CTRL); - sw_w32(0x0000000, RTL838X_LED1_SW_P_EN_CTRL); - sw_w32(0x0000000, RTL838X_LED2_SW_P_EN_CTRL); - - sw_w32_mask(0x3f, 0, RTL838X_LED_GLB_CTRL); - switch (leds_per_port) { - case 3: - sw_w32_mask(0, 0x7 | (0x7 << 3), RTL838X_LED_GLB_CTRL); - sw_w32(0xFFFFFFF, RTL838X_LED2_SW_P_EN_CTRL); - /* FALLTHRU */ - case 2: - sw_w32_mask(0, 0x3 | (0x3 << 3), RTL838X_LED_GLB_CTRL); - sw_w32(0xFFFFFFF, RTL838X_LED1_SW_P_EN_CTRL); - /* FALLTHRU */ - case 1: - sw_w32_mask(0, 0x1 | (0x1 << 3), RTL838X_LED_GLB_CTRL); - sw_w32(0xFFFFFFF, RTL838X_LED0_SW_P_EN_CTRL); - break; - default: - pr_err("No LEDS configured for software control\n"); - } -} - -static const struct of_device_id rtl838x_gpio_of_match[] = { - { .compatible = "realtek,rtl838x-gpio" }, - {}, -}; - -MODULE_DEVICE_TABLE(of, rtl838x_gpio_of_match); - -static int rtl838x_gpio_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - struct rtl838x_gpios *gpios; - int err; - u8 indirect_bus_id; - - pr_info("Probing RTL838X GPIOs\n"); - - if (!np) { - dev_err(&pdev->dev, "No DT found\n"); - return -EINVAL; - } - - gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL); - if (!gpios) - return -ENOMEM; - - gpios->id = sw_r32(RTL838X_MODEL_NAME_INFO) >> 16; - - switch (gpios->id) { - case 0x8332: - pr_debug("Found RTL8332M GPIO\n"); - break; - case 0x8380: - pr_debug("Found RTL8380M GPIO\n"); - break; - case 0x8381: - pr_debug("Found RTL8381M GPIO\n"); - break; - case 0x8382: - pr_debug("Found RTL8382M GPIO\n"); - break; - default: - pr_err("Unknown GPIO chip id (%04x)\n", gpios->id); - return -ENODEV; - } - - gpios->dev = dev; - gpios->gc.base = 0; - /* 0-31: internal - * 32-63, LED control register - * 64-99: external RTL8231 - * 100-131: PORT-LED 0 - * 132-163: PORT-LED 1 - * 164-195: PORT-LED 2 - */ - gpios->gc.ngpio = 196; - gpios->gc.label = "rtl838x"; - gpios->gc.parent = dev; - gpios->gc.owner = THIS_MODULE; - gpios->gc.can_sleep = true; - gpios->bus_id = -1; - gpios->irq = 31; - - gpios->gc.direction_input = rtl838x_direction_input; - gpios->gc.direction_output = rtl838x_direction_output; - gpios->gc.set = rtl838x_gpio_set; - gpios->gc.get = rtl838x_gpio_get; - gpios->gc.get_direction = rtl838x_get_direction; - - if (!of_property_read_u8(np, "indirect-access-bus-id", &indirect_bus_id)) { - gpios->bus_id = indirect_bus_id; - rtl8231_init(gpios); - } - if (!of_property_read_u8(np, "smi-bus-id", &indirect_bus_id)) { - gpios->bus_id = indirect_bus_id; - gpios->smi_clock = RTL838X_GPIO_A2; - gpios->smi_data = RTL838X_GPIO_A3; - gpios->i2c_sda = 1; - gpios->i2c_sdc = 2; - rtl8380_rtl8321_init(gpios); - } - - if (of_property_read_bool(np, "take-port-leds")) { - if (of_property_read_u32(np, "leds-per-port", &gpios->leds_per_port)) - gpios->leds_per_port = 2; - if (of_property_read_u32(np, "led-mode", &gpios->led_mode)) - gpios->led_mode = (0x1ea << 15) | 0x1ea; - if (of_property_read_u32(np, "num-leds", &gpios->num_leds)) - gpios->num_leds = 32; - if (of_property_read_u32(np, "min-led", &gpios->min_led)) - gpios->min_led = 0; - take_port_leds(gpios); - } - - err = devm_gpiochip_add_data(dev, &gpios->gc, gpios); - return err; -} - - -static struct platform_driver rtl838x_gpio_driver = { - .driver = { - .name = "rtl838x-gpio", - .of_match_table = rtl838x_gpio_of_match, - }, - .probe = rtl838x_gpio_probe, -}; - -module_platform_driver(rtl838x_gpio_driver); - -MODULE_DESCRIPTION("Realtek RTL838X GPIO API support"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/rtl838x/files-5.4/drivers/net/dsa/rtl838x_sw.c b/target/linux/rtl838x/files-5.4/drivers/net/dsa/rtl838x_sw.c deleted file mode 100644 index 9b9dda1891..0000000000 --- a/target/linux/rtl838x/files-5.4/drivers/net/dsa/rtl838x_sw.c +++ /dev/null @@ -1,2612 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include "rtl838x.h" - -#define RTL8380_VERSION_A 'A' -#define RTL8390_VERSION_A 'A' -#define RTL8380_VERSION_B 'B' - -DEFINE_MUTEX(smi_lock); - -#define MIB_DESC(_size, _offset, _name) {.size = _size, .offset = _offset, .name = _name} -struct rtl838x_mib_desc { - unsigned int size; - unsigned int offset; - const char *name; -}; - -static inline void rtl838x_mask_port_reg(u64 clear, u64 set, int reg) -{ - sw_w32_mask((u32)clear, (u32)set, reg); -} - -static inline void rtl838x_set_port_reg(u64 set, int reg) -{ - sw_w32(set, reg); -} - -static inline u64 rtl838x_get_port_reg(int reg) -{ - return ((u64) sw_r32(reg)); -} - -static inline void rtl839x_mask_port_reg_be(u64 clear, u64 set, int reg) -{ - sw_w32_mask((u32)(clear >> 32), (u32)(set >> 32), reg); - sw_w32_mask((u32)(clear & 0xffffffff), (u32)(set & 0xffffffff), reg + 4); -} - -static inline void rtl839x_mask_port_reg_le(u64 clear, u64 set, int reg) -{ - sw_w32_mask((u32)clear, (u32)set, reg); - sw_w32_mask((u32)(clear >> 32), (u32)(set >> 32), reg + 4); -} - -static inline void rtl839x_set_port_reg_be(u64 set, int reg) -{ - sw_w32(set >> 32, reg); - sw_w32(set & 0xffffffff, reg + 4); -} - -static inline void rtl839x_set_port_reg_le(u64 set, int reg) -{ - sw_w32(set, reg); - sw_w32(set >> 32, reg + 4); -} - -static inline u64 rtl839x_get_port_reg_be(int reg) -{ - u64 v = sw_r32(reg); - - v <<= 32; - v |= sw_r32(reg + 4); - return v; -} - -static inline u64 rtl839x_get_port_reg_le(int reg) -{ - u64 v = sw_r32(reg + 4); - - v <<= 32; - v |= sw_r32(reg); - return v; -} - -static inline int rtl838x_stat_port_std_mib(int p) -{ - return RTL838X_STAT_PORT_STD_MIB + (p << 8); -} - -static inline int rtl839x_stat_port_std_mib(int p) -{ - return RTL839X_STAT_PORT_STD_MIB + (p << 8); -} - -static inline int rtl838x_port_iso_ctrl(int p) -{ - return RTL838X_PORT_ISO_CTRL(p); -} - -static inline int rtl839x_port_iso_ctrl(int p) -{ - return RTL839X_PORT_ISO_CTRL(p); -} - -static inline void rtl838x_exec_tbl0_cmd(u32 cmd) -{ - sw_w32(cmd, RTL838X_TBL_ACCESS_CTRL_0); - do { } while (sw_r32(RTL838X_TBL_ACCESS_CTRL_0) & (1 << 15)); -} - -static inline void rtl839x_exec_tbl0_cmd(u32 cmd) -{ - sw_w32(cmd, RTL839X_TBL_ACCESS_CTRL_0); - do { } while (sw_r32(RTL839X_TBL_ACCESS_CTRL_0) & (1 << 16)); -} - -static inline void rtl838x_exec_tbl1_cmd(u32 cmd) -{ - sw_w32(cmd, RTL838X_TBL_ACCESS_CTRL_1); - do { } while (sw_r32(RTL838X_TBL_ACCESS_CTRL_1) & (1 << 15)); -} - -static inline void rtl839x_exec_tbl1_cmd(u32 cmd) -{ - sw_w32(cmd, RTL839X_TBL_ACCESS_CTRL_1); - do { } while (sw_r32(RTL839X_TBL_ACCESS_CTRL_1) & (1 << 16)); -} - -static inline int rtl838x_tbl_access_data_0(int i) -{ - return RTL838X_TBL_ACCESS_DATA_0 + (i << 2); -} - -static inline int rtl839x_tbl_access_data_0(int i) -{ - return RTL839X_TBL_ACCESS_DATA_0 + (i << 2); -} - -static inline int rtl838x_vlan_profile(int profile) -{ - return RTL838X_VLAN_PROFILE + (profile << 2); -} - -static inline int rtl839x_vlan_profile(int profile) -{ - return RTL839X_VLAN_PROFILE + (profile << 3); -} - -static inline int rtl838x_vlan_port_egr_filter(int port) -{ - return RTL838X_VLAN_PORT_EGR_FLTR; -} - -static inline int rtl839x_vlan_port_egr_filter(int port) -{ - return RTL839X_VLAN_PORT_EGR_FLTR + ((port >> 5) << 2); -} - -static inline int rtl838x_vlan_port_igr_filter(int port) -{ - return RTL838X_VLAN_PORT_IGR_FLTR + ((port >> 4) << 2); -} - -static inline int rtl839x_vlan_port_igr_filter(int port) -{ - return RTL839X_VLAN_PORT_IGR_FLTR + ((port >> 4) << 2); -} - -static inline int rtl838x_vlan_port_pb(int port) -{ - return RTL838X_VLAN_PORT_PB_VLAN + (port << 2); -} - -static inline int rtl839x_vlan_port_pb(int port) -{ - return RTL839X_VLAN_PORT_PB_VLAN + (port << 2); -} - -static void rtl839x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info) -{ - u32 cmd; - u64 v; - u32 u, w; - - cmd = 1 << 16 /* Execute cmd */ - | 0 << 15 /* Read */ - | 0 << 12 /* Table type 0b000 */ - | (vlan & 0xfff); - rtl839x_exec_tbl0_cmd(cmd); - - v = sw_r32(rtl838x_tbl_access_data_0(0)); - v <<= 32; - u = sw_r32(rtl838x_tbl_access_data_0(1)); - v |= u; - info->tagged_ports = v >> 11; - - w = sw_r32(rtl838x_tbl_access_data_0(2)); - - info->profile_id = w >> 30 | ((u & 1) << 2); - info->hash_mc = !!(u & 2); - info->hash_uc = !!(u & 4); - info->fid = (u >> 3) & 0xff; - - cmd = 1 << 16 /* Execute cmd */ - | 0 << 15 /* Read */ - | 0 << 12 /* Table type 0b000 */ - | (vlan & 0xfff); - rtl839x_exec_tbl1_cmd(cmd); - v = sw_r32(RTL838X_TBL_ACCESS_DATA_1(0)); - v <<= 32; - v |= sw_r32(RTL838X_TBL_ACCESS_DATA_1(1)); - info->untagged_ports = v >> 11; -} - -static void rtl838x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info) -{ - u32 cmd, v; - - cmd = 1 << 15 /* Execute cmd */ - | 1 << 14 /* Read */ - | 0 << 12 /* Table type 0b00 */ - | (vlan & 0xfff); - rtl838x_exec_tbl0_cmd(cmd); - info->tagged_ports = sw_r32(rtl838x_tbl_access_data_0(0)); - v = sw_r32(rtl838x_tbl_access_data_0(1)); - info->profile_id = v & 0x7; - info->hash_mc = !!(v & 0x8); - info->hash_uc = !!(v & 0x10); - info->fid = (v >> 5) & 0x3f; - - - cmd = 1 << 15 /* Execute cmd */ - | 1 << 14 /* Read */ - | 0 << 12 /* Table type 0b00 */ - | (vlan & 0xfff); - rtl838x_exec_tbl1_cmd(cmd); - info->untagged_ports = sw_r32(RTL838X_TBL_ACCESS_DATA_1(0)); -} - -static void rtl839x_vlan_set_tagged(u32 vlan, const struct rtl838x_vlan_info *info) -{ - u32 cmd = 1 << 16 /* Execute cmd */ - | 1 << 15 /* Write */ - | 0 << 12 /* Table type 0b00 */ - | (vlan & 0xfff); - u32 w; - u64 v = info->tagged_ports << 11; - - v |= info->profile_id >> 2; - v |= info->hash_mc ? 2 : 0; - v |= info->hash_uc ? 4 : 0; - v |= ((u32)info->fid) << 3; - rtl839x_set_port_reg_be(v, rtl838x_tbl_access_data_0(0)); - - w = info->profile_id; - sw_w32(w << 30, rtl838x_tbl_access_data_0(2)); - rtl839x_exec_tbl0_cmd(cmd); -} - -static void rtl838x_vlan_set_tagged(u32 vlan, const struct rtl838x_vlan_info *info) -{ - u32 cmd = 1 << 15 /* Execute cmd */ - | 0 << 14 /* Write */ - | 0 << 12 /* Table type 0b00 */ - | (vlan & 0xfff); - u32 v; - - sw_w32(info->tagged_ports, rtl838x_tbl_access_data_0(0)); - - v = info->profile_id; - v |= info->hash_mc ? 0x8 : 0; - v |= info->hash_uc ? 0x10 : 0; - v |= ((u32)info->fid) << 5; - - sw_w32(v, rtl838x_tbl_access_data_0(1)); - rtl838x_exec_tbl0_cmd(cmd); -} - -static void rtl839x_vlan_set_untagged(u32 vlan, u64 portmask) -{ - u32 cmd = 1 << 16 /* Execute cmd */ - | 1 << 15 /* Write */ - | 0 << 12 /* Table type 0b00 */ - | (vlan & 0xfff); - rtl839x_set_port_reg_be(portmask << 11, RTL838X_TBL_ACCESS_DATA_1(0)); - rtl839x_exec_tbl1_cmd(cmd); -} - -static void rtl838x_vlan_set_untagged(u32 vlan, u64 portmask) -{ - u32 cmd = 1 << 15 /* Execute cmd */ - | 0 << 14 /* Write */ - | 0 << 12 /* Table type 0b00 */ - | (vlan & 0xfff); - sw_w32(portmask & 0x1fffffff, RTL838X_TBL_ACCESS_DATA_1(0)); - rtl838x_exec_tbl1_cmd(cmd); -} - -static inline int rtl838x_mac_force_mode_ctrl(int p) -{ - return RTL838X_MAC_FORCE_MODE_CTRL + (p << 2); -} - -static inline int rtl839x_mac_force_mode_ctrl(int p) -{ - return RTL839X_MAC_FORCE_MODE_CTRL + (p << 2); -} - -static inline int rtl838x_mac_port_ctrl(int p) -{ - return RTL838X_MAC_PORT_CTRL(p); -} - -static inline int rtl839x_mac_port_ctrl(int p) -{ - return RTL839X_MAC_PORT_CTRL(p); -} - -static inline int rtl838x_l2_port_new_salrn(int p) -{ - return RTL838X_L2_PORT_NEW_SALRN(p); -} - -static inline int rtl839x_l2_port_new_salrn(int p) -{ - return RTL839X_L2_PORT_NEW_SALRN(p); -} - -static inline int rtl838x_l2_port_new_sa_fwd(int p) -{ - return RTL838X_L2_PORT_NEW_SA_FWD(p); -} - -static inline int rtl839x_l2_port_new_sa_fwd(int p) -{ - return RTL839X_L2_PORT_NEW_SA_FWD(p); -} - -static inline int rtl838x_mac_link_spd_sts(int p) -{ - return RTL838X_MAC_LINK_SPD_STS(p); -} - -static inline int rtl839x_mac_link_spd_sts(int p) -{ - return RTL839X_MAC_LINK_SPD_STS(p); -} - -static inline int rtl838x_mir_ctrl(int group) -{ - return RTL838X_MIR_CTRL(group); -} - -static inline int rtl839x_mir_ctrl(int group) -{ - return RTL839X_MIR_CTRL(group); -} - -static inline int rtl838x_mir_dpm(int group) -{ - return RTL838X_MIR_DPM_CTRL(group); -} - -static inline int rtl839x_mir_dpm(int group) -{ - return RTL839X_MIR_DPM_CTRL(group); -} - -static inline int rtl838x_mir_spm(int group) -{ - return RTL838X_MIR_SPM_CTRL(group); -} - -static inline int rtl839x_mir_spm(int group) -{ - return RTL839X_MIR_SPM_CTRL(group); -} - -static u64 rtl838x_read_l2_entry_using_hash(u32 hash, u32 position, struct rtl838x_l2_entry *e) -{ - u64 entry; - u32 r[3]; - - /* Search in SRAM, with hash and at position in hash bucket (0-3) */ - u32 idx = (0 << 14) | (hash << 2) | position; - - u32 cmd = 1 << 16 /* Execute cmd */ - | 1 << 15 /* Read */ - | 0 << 13 /* Table type 0b00 */ - | (idx & 0x1fff); - - sw_w32(cmd, RTL838X_TBL_ACCESS_L2_CTRL); - do { } while (sw_r32(RTL838X_TBL_ACCESS_L2_CTRL) & (1 << 16)); - r[0] = sw_r32(RTL838X_TBL_ACCESS_L2_DATA(0)); - r[1] = sw_r32(RTL838X_TBL_ACCESS_L2_DATA(1)); - r[2] = sw_r32(RTL838X_TBL_ACCESS_L2_DATA(2)); - - e->mac[0] = (r[1] >> 20); - e->mac[1] = (r[1] >> 12); - e->mac[2] = (r[1] >> 4); - e->mac[3] = (r[1] & 0xf) << 4 | (r[2] >> 28); - e->mac[4] = (r[2] >> 20); - e->mac[5] = (r[2] >> 12); - e->is_static = !!((r[0] >> 19) & 1); - e->vid = r[0] & 0xfff; - e->rvid = r[2] & 0xfff; - e->port = (r[0] >> 12) & 0x1f; - - e->valid = true; - if (!(r[0] >> 17)) /* Check for invalid entry */ - e->valid = false; - - if (e->valid) - pr_info("Found in Hash: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]); - - entry = (((u64) r[1]) << 32) | (r[2] & 0xfffff000) | (r[0] & 0xfff); - return entry; -} - -static u64 rtl839x_read_l2_entry_using_hash(u32 hash, u32 position, struct rtl838x_l2_entry *e) -{ - u64 entry; - u32 r[3]; - - /* Search in SRAM, with hash and at position in hash bucket (0-3) */ - u32 idx = (0 << 14) | (hash << 2) | position; - - u32 cmd = 1 << 17 /* Execute cmd */ - | 0 << 16 /* Read */ - | 0 << 14 /* Table type 0b00 */ - | (idx & 0x3fff); - - sw_w32(cmd, RTL839X_TBL_ACCESS_L2_CTRL); - do { } while (sw_r32(RTL839X_TBL_ACCESS_L2_CTRL) & (1 << 17)); - r[0] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(0)); - r[1] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(1)); - r[2] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(2)); - - /* Table contains different entry types, we need to identify the right one: - * Check for MC entries, first - */ - e->is_ip_mc = !!(r[2] & (1 << 31)); - e->is_ipv6_mc = !!(r[2] & (1 << 30)); - e->type = L2_INVALID; - if (!e->is_ip_mc) { - e->mac[0] = (r[0] >> 12); - e->mac[1] = (r[0] >> 4); - e->mac[2] = ((r[1] >> 28) | (r[0] << 4)); - e->mac[3] = (r[1] >> 20); - e->mac[4] = (r[1] >> 12); - e->mac[5] = (r[1] >> 4); - - /* Is it a unicast entry? check multicast bit */ - if (!(e->mac[0] & 1)) { - e->is_static = !!((r[2] >> 18) & 1); - e->vid = (r[2] >> 4) & 0xfff; - e->rvid = (r[0] >> 20) & 0xfff; - e->port = (r[2] >> 24) & 0x3f; - e->block_da = !!(r[2] & (1 << 19)); - e->block_sa = !!(r[2] & (1 << 20)); - e->suspended = !!(r[2] & (1 << 17)); - e->next_hop = !!(r[2] & (1 << 16)); - if (e->next_hop) - pr_info("Found next hop entry, need to read data\n"); - e->age = (r[2] >> 21) & 3; - e->valid = true; - if (!(r[2] & 0xc0fd0000)) /* Check for valid entry */ - e->valid = false; - else - e->type = L2_UNICAST; - } else { - e->valid = true; - e->type = L2_MULTICAST; - e->mc_portmask_index = (r[2] >> 6) & 0xfff; - } - } - if (e->is_ip_mc) { - e->valid = true; - e->type = IP4_MULTICAST; - } - if (e->is_ipv6_mc) { - e->valid = true; - e->type = IP6_MULTICAST; - } - - entry = (((u64) r[0]) << 44) | ((u64)(r[1] & 0xfffffff0) << 12) | ((r[2] >> 4) & 0xfff); - return entry; -} - -static u64 rtl838x_read_cam(int idx, struct rtl838x_l2_entry *e) -{ - u64 entry; - u32 r[3]; - - u32 cmd = 1 << 16 /* Execute cmd */ - | 1 << 15 /* Read */ - | 1 << 13 /* Table type 0b01 */ - | (idx & 0x3f); - sw_w32(cmd, RTL838X_TBL_ACCESS_L2_CTRL); - do { } while (sw_r32(RTL838X_TBL_ACCESS_L2_CTRL) & (1 << 16)); - r[0] = sw_r32(RTL838X_TBL_ACCESS_L2_DATA(0)); - r[1] = sw_r32(RTL838X_TBL_ACCESS_L2_DATA(1)); - r[2] = sw_r32(RTL838X_TBL_ACCESS_L2_DATA(2)); - - e->mac[0] = (r[1] >> 20); - e->mac[1] = (r[1] >> 12); - e->mac[2] = (r[1] >> 4); - e->mac[3] = (r[1] & 0xf) << 4 | (r[2] >> 28); - e->mac[4] = (r[2] >> 20); - e->mac[5] = (r[2] >> 12); - e->is_static = !!((r[0] >> 19) & 1); - e->vid = r[0] & 0xfff; - e->rvid = r[2] & 0xfff; - e->port = (r[0] >> 12) & 0x1f; - - e->valid = true; - if (!(r[0] >> 17)) /* Check for invalid entry */ - e->valid = false; - - if (e->valid) - pr_info("Found in CAM: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]); - - entry = (((u64) r[1]) << 32) | (r[2] & 0xfffff000) | (r[0] & 0xfff); - return entry; -} - -static u64 rtl839x_read_cam(int idx, struct rtl838x_l2_entry *e) -{ - u64 entry; - u32 r[3]; - - u32 cmd = 1 << 17 /* Execute cmd */ - | 0 << 16 /* Read */ - | 1 << 14 /* Table type 0b01 */ - | (idx & 0x3f); - sw_w32(cmd, RTL839X_TBL_ACCESS_L2_CTRL); - do { } while (sw_r32(RTL839X_TBL_ACCESS_L2_CTRL) & (1 << 17)); - r[0] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(0)); - r[1] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(1)); - r[2] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(2)); - - e->mac[0] = (r[0] >> 12); - e->mac[1] = (r[0] >> 4); - e->mac[2] = ((r[1] >> 28) | (r[0] << 4)); - e->mac[3] = (r[1] >> 20); - e->mac[4] = (r[1] >> 12); - e->mac[5] = (r[1] >> 4); - e->is_static = !!((r[2] >> 18) & 1); - e->vid = (r[2] >> 4) & 0xfff; - e->rvid = (r[0] >> 20) & 0xfff; - e->port = (r[2] >> 24) & 0x3f; - - e->valid = true; - if (!(r[2] & 0x10fd0000)) /* Check for invalid entry */ - e->valid = false; - - if (e->valid) - pr_info("Found in CAM: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]); - - entry = (((u64) r[0]) << 12) | ((r[1] & 0xfffffff0) << 12) | ((r[2] >> 4) & 0xfff); - return entry; -} - -static const struct rtl838x_reg rtl838x_reg = { - .mask_port_reg_be = rtl838x_mask_port_reg, - .set_port_reg_be = rtl838x_set_port_reg, - .get_port_reg_be = rtl838x_get_port_reg, - .mask_port_reg_le = rtl838x_mask_port_reg, - .set_port_reg_le = rtl838x_set_port_reg, - .get_port_reg_le = rtl838x_get_port_reg, - .stat_port_rst = RTL838X_STAT_PORT_RST, - .stat_rst = RTL838X_STAT_RST, - .stat_port_std_mib = rtl838x_stat_port_std_mib, - .port_iso_ctrl = rtl838x_port_iso_ctrl, - .l2_ctrl_0 = RTL838X_L2_CTRL_0, - .l2_ctrl_1 = RTL838X_L2_CTRL_1, - .l2_port_aging_out = RTL838X_L2_PORT_AGING_OUT, - .smi_poll_ctrl = RTL838X_SMI_POLL_CTRL, - .l2_tbl_flush_ctrl = RTL838X_L2_TBL_FLUSH_CTRL, - .exec_tbl0_cmd = rtl838x_exec_tbl0_cmd, - .exec_tbl1_cmd = rtl838x_exec_tbl1_cmd, - .tbl_access_data_0 = rtl838x_tbl_access_data_0, - .isr_glb_src = RTL838X_ISR_GLB_SRC, - .isr_port_link_sts_chg = RTL838X_ISR_PORT_LINK_STS_CHG, - .imr_port_link_sts_chg = RTL838X_IMR_PORT_LINK_STS_CHG, - .imr_glb = RTL838X_IMR_GLB, - .vlan_tables_read = rtl838x_vlan_tables_read, - .vlan_set_tagged = rtl838x_vlan_set_tagged, - .vlan_set_untagged = rtl838x_vlan_set_untagged, - .mac_force_mode_ctrl = rtl838x_mac_force_mode_ctrl, - .mac_port_ctrl = rtl838x_mac_port_ctrl, - .l2_port_new_salrn = rtl838x_l2_port_new_salrn, - .l2_port_new_sa_fwd = rtl838x_l2_port_new_sa_fwd, - .mir_ctrl = rtl838x_mir_ctrl, - .mir_dpm = rtl838x_mir_dpm, - .mir_spm = rtl838x_mir_spm, - .mac_link_sts = RTL838X_MAC_LINK_STS, - .mac_link_dup_sts = RTL838X_MAC_LINK_DUP_STS, - .mac_link_spd_sts = rtl838x_mac_link_spd_sts, - .mac_rx_pause_sts = RTL838X_MAC_RX_PAUSE_STS, - .mac_tx_pause_sts = RTL838X_MAC_TX_PAUSE_STS, - .read_l2_entry_using_hash = rtl838x_read_l2_entry_using_hash, - .read_cam = rtl838x_read_cam, - .vlan_profile = rtl838x_vlan_profile, - .vlan_port_egr_filter = rtl838x_vlan_port_egr_filter, - .vlan_port_igr_filter = rtl838x_vlan_port_igr_filter, - .vlan_port_pb = rtl838x_vlan_port_pb, -}; - -static const struct rtl838x_reg rtl839x_reg = { - .mask_port_reg_be = rtl839x_mask_port_reg_be, - .set_port_reg_be = rtl839x_set_port_reg_be, - .get_port_reg_be = rtl839x_get_port_reg_be, - .mask_port_reg_le = rtl839x_mask_port_reg_le, - .set_port_reg_le = rtl839x_set_port_reg_le, - .get_port_reg_le = rtl839x_get_port_reg_le, - .stat_port_rst = RTL839X_STAT_PORT_RST, - .stat_rst = RTL839X_STAT_RST, - .stat_port_std_mib = rtl839x_stat_port_std_mib, - .port_iso_ctrl = rtl839x_port_iso_ctrl, - .l2_ctrl_0 = RTL839X_L2_CTRL_0, - .l2_ctrl_1 = RTL839X_L2_CTRL_1, - .l2_port_aging_out = RTL839X_L2_PORT_AGING_OUT, - .smi_poll_ctrl = RTL839X_SMI_PORT_POLLING_CTRL, - .l2_tbl_flush_ctrl = RTL839X_L2_TBL_FLUSH_CTRL, - .exec_tbl0_cmd = rtl839x_exec_tbl0_cmd, - .exec_tbl1_cmd = rtl839x_exec_tbl1_cmd, - .tbl_access_data_0 = rtl839x_tbl_access_data_0, - .isr_glb_src = RTL839X_ISR_GLB_SRC, - .isr_port_link_sts_chg = RTL839X_ISR_PORT_LINK_STS_CHG, - .imr_port_link_sts_chg = RTL839X_IMR_PORT_LINK_STS_CHG, - .imr_glb = RTL839X_IMR_GLB, - .vlan_tables_read = rtl839x_vlan_tables_read, - .vlan_set_tagged = rtl839x_vlan_set_tagged, - .vlan_set_untagged = rtl839x_vlan_set_untagged, - .mac_force_mode_ctrl = rtl839x_mac_force_mode_ctrl, - .mac_port_ctrl = rtl839x_mac_port_ctrl, - .l2_port_new_salrn = rtl839x_l2_port_new_salrn, - .l2_port_new_sa_fwd = rtl839x_l2_port_new_sa_fwd, - .mir_ctrl = rtl839x_mir_ctrl, - .mir_dpm = rtl839x_mir_dpm, - .mir_spm = rtl839x_mir_spm, - .mac_link_sts = RTL839X_MAC_LINK_STS, - .mac_link_dup_sts = RTL839X_MAC_LINK_DUP_STS, - .mac_link_spd_sts = rtl839x_mac_link_spd_sts, - .mac_rx_pause_sts = RTL839X_MAC_RX_PAUSE_STS, - .mac_tx_pause_sts = RTL839X_MAC_TX_PAUSE_STS, - .read_l2_entry_using_hash = rtl839x_read_l2_entry_using_hash, - .read_cam = rtl839x_read_cam, - .vlan_profile = rtl839x_vlan_profile, - .vlan_port_egr_filter = rtl839x_vlan_port_egr_filter, - .vlan_port_igr_filter = rtl839x_vlan_port_igr_filter, - .vlan_port_pb = rtl839x_vlan_port_pb, -}; - -static const struct rtl838x_mib_desc rtl838x_mib[] = { - MIB_DESC(2, 0xf8, "ifInOctets"), - MIB_DESC(2, 0xf0, "ifOutOctets"), - MIB_DESC(1, 0xec, "dot1dTpPortInDiscards"), - MIB_DESC(1, 0xe8, "ifInUcastPkts"), - MIB_DESC(1, 0xe4, "ifInMulticastPkts"), - MIB_DESC(1, 0xe0, "ifInBroadcastPkts"), - MIB_DESC(1, 0xdc, "ifOutUcastPkts"), - MIB_DESC(1, 0xd8, "ifOutMulticastPkts"), - MIB_DESC(1, 0xd4, "ifOutBroadcastPkts"), - MIB_DESC(1, 0xd0, "ifOutDiscards"), - MIB_DESC(1, 0xcc, ".3SingleCollisionFrames"), - MIB_DESC(1, 0xc8, ".3MultipleCollisionFrames"), - MIB_DESC(1, 0xc4, ".3DeferredTransmissions"), - MIB_DESC(1, 0xc0, ".3LateCollisions"), - MIB_DESC(1, 0xbc, ".3ExcessiveCollisions"), - MIB_DESC(1, 0xb8, ".3SymbolErrors"), - MIB_DESC(1, 0xb4, ".3ControlInUnknownOpcodes"), - MIB_DESC(1, 0xb0, ".3InPauseFrames"), - MIB_DESC(1, 0xac, ".3OutPauseFrames"), - MIB_DESC(1, 0xa8, "DropEvents"), - MIB_DESC(1, 0xa4, "tx_BroadcastPkts"), - MIB_DESC(1, 0xa0, "tx_MulticastPkts"), - MIB_DESC(1, 0x9c, "CRCAlignErrors"), - MIB_DESC(1, 0x98, "tx_UndersizePkts"), - MIB_DESC(1, 0x94, "rx_UndersizePkts"), - MIB_DESC(1, 0x90, "rx_UndersizedropPkts"), - MIB_DESC(1, 0x8c, "tx_OversizePkts"), - MIB_DESC(1, 0x88, "rx_OversizePkts"), - MIB_DESC(1, 0x84, "Fragments"), - MIB_DESC(1, 0x80, "Jabbers"), - MIB_DESC(1, 0x7c, "Collisions"), - MIB_DESC(1, 0x78, "tx_Pkts64Octets"), - MIB_DESC(1, 0x74, "rx_Pkts64Octets"), - MIB_DESC(1, 0x70, "tx_Pkts65to127Octets"), - MIB_DESC(1, 0x6c, "rx_Pkts65to127Octets"), - MIB_DESC(1, 0x68, "tx_Pkts128to255Octets"), - MIB_DESC(1, 0x64, "rx_Pkts128to255Octets"), - MIB_DESC(1, 0x60, "tx_Pkts256to511Octets"), - MIB_DESC(1, 0x5c, "rx_Pkts256to511Octets"), - MIB_DESC(1, 0x58, "tx_Pkts512to1023Octets"), - MIB_DESC(1, 0x54, "rx_Pkts512to1023Octets"), - MIB_DESC(1, 0x50, "tx_Pkts1024to1518Octets"), - MIB_DESC(1, 0x4c, "rx_StatsPkts1024to1518Octets"), - MIB_DESC(1, 0x48, "tx_Pkts1519toMaxOctets"), - MIB_DESC(1, 0x44, "rx_Pkts1519toMaxOctets"), - MIB_DESC(1, 0x40, "rxMacDiscards") -}; - -static irqreturn_t rtl838x_switch_irq(int irq, void *dev_id) -{ - struct dsa_switch *ds = dev_id; - u32 status = sw_r32(RTL838X_ISR_GLB_SRC); - u32 ports = sw_r32(RTL838X_ISR_PORT_LINK_STS_CHG); - u32 link; - int i; - - /* Clear status */ - sw_w32(ports, RTL838X_ISR_PORT_LINK_STS_CHG); - pr_info("RTL8380 Link change: status: %x, ports %x\n", status, ports); - - for (i = 0; i < 28; i++) { - if (ports & (1 << i)) { - link = sw_r32(RTL838X_MAC_LINK_STS); - if (link & (1 << i)) - dsa_port_phylink_mac_change(ds, i, true); - else - dsa_port_phylink_mac_change(ds, i, false); - } - } - return IRQ_HANDLED; -} - -static irqreturn_t rtl839x_switch_irq(int irq, void *dev_id) -{ - struct dsa_switch *ds = dev_id; - u32 status = sw_r32(RTL839X_ISR_GLB_SRC); - u64 ports = rtl839x_get_port_reg_le(RTL839X_ISR_PORT_LINK_STS_CHG); - u64 link; - int i; - - /* Clear status */ - rtl839x_set_port_reg_le(ports, RTL839X_ISR_PORT_LINK_STS_CHG); - pr_info("RTL8390 Link change: status: %x, ports %llx\n", status, ports); - - for (i = 0; i < 52; i++) { - if (ports & (1ULL << i)) { - link = rtl839x_get_port_reg_le(RTL839X_MAC_LINK_STS); - if (link & (1ULL << i)) - dsa_port_phylink_mac_change(ds, i, true); - else - dsa_port_phylink_mac_change(ds, i, false); - } - } - return IRQ_HANDLED; -} - -struct fdb_update_work { - struct work_struct work; - struct net_device *ndev; - u64 macs[]; -}; - -void rtl838x_fdb_sync(struct work_struct *work) -{ - const struct fdb_update_work *uw = - container_of(work, struct fdb_update_work, work); - struct switchdev_notifier_fdb_info info; - u8 addr[ETH_ALEN]; - int i = 0; - int action; - - while (uw->macs[i]) { - action = (uw->macs[i] & (1ULL << 63)) ? SWITCHDEV_FDB_ADD_TO_BRIDGE - : SWITCHDEV_FDB_DEL_TO_BRIDGE; - u64_to_ether_addr(uw->macs[i] & 0xffffffffffffULL, addr); - info.addr = &addr[0]; - info.vid = 0; - info.offloaded = 1; - pr_debug("FDB entry %d: %llx, action %d\n", i, uw->macs[0], action); - call_switchdev_notifiers(action, uw->ndev, &info.info, NULL); - i++; - } - kfree(work); -} - -int rtl8380_sds_power(int mac, int val) -{ - u32 mode = (val == 1) ? 0x4 : 0x9; - u32 offset = (mac == 24) ? 5 : 0; - - if ((mac != 24) && (mac != 26)) { - pr_err("%s: not a fibre port: %d\n", __func__, mac); - return -1; - } - - sw_w32_mask(0x1f << offset, mode << offset, RTL838X_SDS_MODE_SEL); - - rtl8380_sds_rst(mac); - - return 0; -} - -int rtl8390_sds_power(int mac, int val) -{ - u32 offset = (mac == 48) ? 0x0 : 0x100; - u32 mode = val ? 0 : 1; - - pr_info("In %s: mac %d, set %d\n", __func__, mac, val); - - if ((mac != 48) && (mac != 49)) { - pr_err("%s: not an SFP port: %d\n", __func__, mac); - return -1; - } - - // Set bit 1003. 1000 starts at 7c - sw_w32_mask(1 << 11, mode << 11, RTL839X_SDS12_13_PWR0 + offset); - - return 0; -} - -static int rtl838x_smi_wait_op(int timeout) -{ - do { - timeout--; - udelay(10); - } while ((sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_1) & 0x1) && (timeout >= 0)); - if (timeout <= 0) - return -1; - return 0; -} - -/* - * Write to a register in a page of the PHY - */ -int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val) -{ - u32 v; - u32 park_page; - - val &= 0xffff; - if (port > 31 || page > 4095 || reg > 31) - return -ENOTSUPP; - - mutex_lock(&smi_lock); - if (rtl838x_smi_wait_op(10000)) - goto timeout; - - sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0); - mdelay(10); - - sw_w32_mask(0xffff0000, val << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2); - - park_page = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_1) & ((0x1f << 15) | 0x2); - v = reg << 20 | page << 3 | 0x4; - sw_w32(v | park_page, RTL838X_SMI_ACCESS_PHY_CTRL_1); - sw_w32_mask(0, 1, RTL838X_SMI_ACCESS_PHY_CTRL_1); - - if (rtl838x_smi_wait_op(10000)) - goto timeout; - - mutex_unlock(&smi_lock); - return 0; - -timeout: - mutex_unlock(&smi_lock); - return -ETIMEDOUT; -} - -int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val) -{ - u32 v; - int err = 0; - - val &= 0xffff; - if (port > 63 || page > 4095 || reg > 31) - return -ENOTSUPP; - - mutex_lock(&smi_lock); - /* Clear both port registers */ - sw_w32(0, RTL839X_PHYREG_PORT_CTRL(0)); - sw_w32(0, RTL839X_PHYREG_PORT_CTRL(0) + 4); - sw_w32_mask(0, 1 << port, RTL839X_PHYREG_PORT_CTRL(port)); - - sw_w32_mask(0xffff0000, val << 16, RTL839X_PHYREG_DATA_CTRL); - - v = reg << 5 | page << 10 | ((page == 0x1fff) ? 0x1f : 0) << 23; - sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); - - sw_w32(0x1ff, RTL839X_PHYREG_CTRL); - - v |= 1 << 3 | 1; /* Write operation and execute */ - sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); - - do { - } while (sw_r32(RTL839X_PHYREG_ACCESS_CTRL) & 0x1); - - if (sw_r32(RTL839X_PHYREG_ACCESS_CTRL) & 0x2) - err = -EIO; - - mutex_unlock(&smi_lock); - return err; -} - -/* - * Reads a register in a page from the PHY - */ -int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val) -{ - u32 v; - u32 park_page; - - if (port > 31) { - *val = 0xffff; - return 0; - } - - if (page > 4095 || reg > 31) - return -ENOTSUPP; - - mutex_lock(&smi_lock); - - if (rtl838x_smi_wait_op(10000)) - goto timeout; - - sw_w32_mask(0xffff0000, port << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2); - - park_page = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_1) & ((0x1f << 15) | 0x2); - v = reg << 20 | page << 3; - sw_w32(v | park_page, RTL838X_SMI_ACCESS_PHY_CTRL_1); - sw_w32_mask(0, 1, RTL838X_SMI_ACCESS_PHY_CTRL_1); - - if (rtl838x_smi_wait_op(10000)) - goto timeout; - - *val = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_2) & 0xffff; - - mutex_unlock(&smi_lock); - return 0; - -timeout: - mutex_unlock(&smi_lock); - return -ETIMEDOUT; -} - -int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val) -{ - u32 v; - - if (port > 63 || page > 4095 || reg > 31) - return -ENOTSUPP; - - mutex_lock(&smi_lock); - - sw_w32_mask(0xffff0000, port << 16, RTL839X_PHYREG_DATA_CTRL); - v = reg << 5 | page << 10 | ((page == 0x1fff) ? 0x1f : 0) << 23; - sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); - - sw_w32(0x1ff, RTL839X_PHYREG_CTRL); - - v |= 1; - sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); - - do { - } while (sw_r32(RTL839X_PHYREG_ACCESS_CTRL) & 0x1); - - *val = sw_r32(RTL839X_PHYREG_DATA_CTRL) & 0xffff; - - mutex_unlock(&smi_lock); - return 0; -} - -static int read_phy(u32 port, u32 page, u32 reg, u32 *val) -{ - if (soc_info.family == RTL8390_FAMILY_ID) - return rtl839x_read_phy(port, page, reg, val); - else - return rtl838x_read_phy(port, page, reg, val); -} - -static int write_phy(u32 port, u32 page, u32 reg, u32 val) -{ - if (soc_info.family == RTL8390_FAMILY_ID) - return rtl839x_write_phy(port, page, reg, val); - else - return rtl838x_write_phy(port, page, reg, val); -} - -/* - * Write to an mmd register of the PHY - */ -int rtl838x_write_mmd_phy(u32 port, u32 addr, u32 reg, u32 val) -{ - u32 v; - - pr_debug("MMD write: port %d, dev %d, reg %d, val %x\n", port, addr, reg, val); - val &= 0xffff; - mutex_lock(&smi_lock); - - if (rtl838x_smi_wait_op(10000)) - goto timeout; - - sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0); - mdelay(10); - - sw_w32_mask(0xffff0000, val << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2); - - sw_w32_mask(0x1f << 16, addr << 16, RTL838X_SMI_ACCESS_PHY_CTRL_3); - sw_w32_mask(0xffff, reg, RTL838X_SMI_ACCESS_PHY_CTRL_3); - /* mmd-access | write | cmd-start */ - v = 1 << 1 | 1 << 2 | 1; - sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_1); - - if (rtl838x_smi_wait_op(10000)) - goto timeout; - - mutex_unlock(&smi_lock); - return 0; - -timeout: - mutex_unlock(&smi_lock); - return -ETIMEDOUT; -} - -/* - * Read an mmd register of the PHY - */ -int rtl838x_read_mmd_phy(u32 port, u32 addr, u32 reg, u32 *val) -{ - u32 v; - - mutex_lock(&smi_lock); - - if (rtl838x_smi_wait_op(10000)) - goto timeout; - - sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0); - mdelay(10); - - sw_w32_mask(0xffff0000, port << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2); - - v = addr << 16 | reg; - sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_3); - - /* mmd-access | read | cmd-start */ - v = 1 << 1 | 0 << 2 | 1; - sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_1); - - if (rtl838x_smi_wait_op(10000)) - goto timeout; - - *val = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_2) & 0xffff; - - mutex_unlock(&smi_lock); - return 0; - -timeout: - mutex_unlock(&smi_lock); - return -ETIMEDOUT; -} - -static void rtl8380_get_version(struct rtl838x_switch_priv *priv) -{ - u32 rw_save, info_save; - u32 info; - - if (priv->id) - pr_debug("SoC ID: %4x: %s\n", priv->id, soc_info.name); - else - pr_err("Unknown chip id (%04x)\n", priv->id); - - rw_save = sw_r32(RTL838X_INT_RW_CTRL); - sw_w32(rw_save | 0x3, RTL838X_INT_RW_CTRL); - - info_save = sw_r32(RTL838X_CHIP_INFO); - sw_w32(info_save | 0xA0000000, RTL838X_CHIP_INFO); - - info = sw_r32(RTL838X_CHIP_INFO); - sw_w32(info_save, RTL838X_CHIP_INFO); - sw_w32(rw_save, RTL838X_INT_RW_CTRL); - - if ((info & 0xFFFF) == 0x6275) { - if (((info >> 16) & 0x1F) == 0x1) - priv->version = RTL8380_VERSION_A; - else if (((info >> 16) & 0x1F) == 0x2) - priv->version = RTL8380_VERSION_B; - else - priv->version = RTL8380_VERSION_B; - } else { - priv->version = '-'; - } -} - -static void rtl8390_get_version(struct rtl838x_switch_priv *priv) -{ - u32 info; - - sw_w32_mask(0xf << 28, 0xa << 28, RTL839X_CHIP_INFO); - info = sw_r32(RTL839X_CHIP_INFO); - pr_info("Chip-Info: %x\n", info); - priv->version = RTL8390_VERSION_A; -} - -int dsa_phy_read(struct dsa_switch *ds, int phy_addr, int phy_reg) -{ - u32 val; - u32 offset = 0; - struct rtl838x_switch_priv *priv = ds->priv; - - if (phy_addr >= 24 && phy_addr <= 27 - && priv->ports[24].phy == PHY_RTL838X_SDS) { - if (phy_addr == 26) - offset = 0x100; - val = sw_r32(MAPLE_SDS4_FIB_REG0r + offset + (phy_reg << 2)) & 0xffff; - return val; - } - - read_phy(phy_addr, 0, phy_reg, &val); - return val; -} - -int dsa_phy_write(struct dsa_switch *ds, int phy_addr, int phy_reg, u16 val) -{ - u32 offset = 0; - struct rtl838x_switch_priv *priv = ds->priv; - - if (phy_addr >= 24 && phy_addr <= 27 - && priv->ports[24].phy == PHY_RTL838X_SDS) { - if (phy_addr == 26) - offset = 0x100; - sw_w32(val, MAPLE_SDS4_FIB_REG0r + offset + (phy_reg << 2)); - return 0; - } - return write_phy(phy_addr, 0, phy_reg, val); -} - -static int rtl838x_mdio_read(struct mii_bus *bus, int addr, int regnum) -{ - int ret; - struct rtl838x_switch_priv *priv = bus->priv; - - ret = dsa_phy_read(priv->ds, addr, regnum); - return ret; -} - -static int rtl838x_mdio_write(struct mii_bus *bus, int addr, int regnum, - u16 val) -{ - struct rtl838x_switch_priv *priv = bus->priv; - - return dsa_phy_write(priv->ds, addr, regnum, val); -} - -static void rtl838x_enable_phy_polling(struct rtl838x_switch_priv *priv) -{ - int i; - u64 v = 0; - - msleep(1000); - /* Enable all ports with a PHY, including the SFP-ports */ - for (i = 0; i < priv->cpu_port; i++) { - if (priv->ports[i].phy) - v |= 1 << i; - } - - pr_info("%s: %16llx\n", __func__, v); - priv->r->set_port_reg_le(v, priv->r->smi_poll_ctrl); - - /* PHY update complete */ - if (priv->family_id == RTL8390_FAMILY_ID) - sw_w32_mask(0, 1 << 7, RTL839X_SMI_GLB_CTRL); - else - sw_w32_mask(0, 0x8000, RTL838X_SMI_GLB_CTRL); -} - -void rtl839x_print_matrix(void) -{ - volatile u64 *ptr = RTL838X_SW_BASE + RTL839X_PORT_ISO_CTRL(0); - int i; - - for (i = 0; i < 52; i += 4) - pr_info("> %16llx %16llx %16llx %16llx\n", - ptr[i + 0], ptr[i + 1], ptr[i + 2], ptr[i + 3]); - pr_info("CPU_PORT> %16llx\n", ptr[52]); -} - -void rtl838x_print_matrix(void) -{ - unsigned volatile int *ptr = RTL838X_SW_BASE + RTL838X_PORT_ISO_CTRL(0); - int i; - - if (soc_info.family == RTL8390_FAMILY_ID) - return rtl839x_print_matrix(); - - for (i = 0; i < 28; i += 8) - pr_info("> %8x %8x %8x %8x %8x %8x %8x %8x\n", - ptr[i + 0], ptr[i + 1], ptr[i + 2], ptr[i + 3], ptr[i + 4], ptr[i + 5], - ptr[i + 6], ptr[i + 7]); - pr_info("CPU_PORT> %8x\n", ptr[28]); -} - -static void rtl838x_init_stats(struct rtl838x_switch_priv *priv) -{ - mutex_lock(&priv->reg_mutex); - - /* Enable statistics module: all counters plus debug. - * On RTL839x all counters are enabled by default - */ - if (priv->family_id == RTL8380_FAMILY_ID) - sw_w32_mask(0, 3, RTL838X_STAT_CTRL); - - /* Reset statistics counters */ - sw_w32_mask(0, 1, priv->r->stat_rst); - - mutex_unlock(&priv->reg_mutex); -} - -static int rtl838x_setup(struct dsa_switch *ds) -{ - int i; - struct rtl838x_switch_priv *priv = ds->priv; - u64 port_bitmap = 1ULL << priv->cpu_port; - - pr_info("%s called\n", __func__); - - /* Disable MAC polling the PHY so that we can start configuration */ - priv->r->set_port_reg_le(0ULL, priv->r->smi_poll_ctrl); - - for (i = 0; i < ds->num_ports; i++) - priv->ports[i].enable = false; - priv->ports[priv->cpu_port].enable = true; - - /* Isolate ports from each other: traffic only CPU <-> port */ - /* Setting bit j in register RTL838X_PORT_ISO_CTRL(i) allows - * traffic from source port i to destination port j - */ - for (i = 0; i < priv->cpu_port; i++) { - if (priv->ports[i].phy) { - priv->r->set_port_reg_be(1ULL << priv->cpu_port | 1ULL << i, - priv->r->port_iso_ctrl(i)); - port_bitmap |= 1ULL << i; - } - } - priv->r->set_port_reg_be(port_bitmap, priv->r->port_iso_ctrl(priv->cpu_port)); - - rtl838x_print_matrix(); - - rtl838x_init_stats(priv); - - /* Enable MAC Polling PHY again */ - rtl838x_enable_phy_polling(priv); - pr_info("Please wait until PHY is settled\n"); - msleep(1000); - return 0; -} - -static void rtl838x_get_strings(struct dsa_switch *ds, - int port, u32 stringset, u8 *data) -{ - int i; - - if (stringset != ETH_SS_STATS) - return; - - for (i = 0; i < ARRAY_SIZE(rtl838x_mib); i++) - strncpy(data + i * ETH_GSTRING_LEN, rtl838x_mib[i].name, - ETH_GSTRING_LEN); -} - -static void rtl838x_get_ethtool_stats(struct dsa_switch *ds, int port, - uint64_t *data) -{ - struct rtl838x_switch_priv *priv = ds->priv; - const struct rtl838x_mib_desc *mib; - int i; - u64 high; - - for (i = 0; i < ARRAY_SIZE(rtl838x_mib); i++) { - mib = &rtl838x_mib[i]; - - data[i] = sw_r32(priv->r->stat_port_std_mib(port) + 252 - mib->offset); - if (mib->size == 2) { - high = sw_r32(priv->r->stat_port_std_mib(port) + 252 - mib->offset - 4); - data[i] |= high << 32; - } - } -} - -static int rtl838x_get_sset_count(struct dsa_switch *ds, int port, int sset) -{ - if (sset != ETH_SS_STATS) - return 0; - - return ARRAY_SIZE(rtl838x_mib); -} - -static enum dsa_tag_protocol -rtl838x_get_tag_protocol(struct dsa_switch *ds, int port) -{ - /* The switch does not tag the frames, instead internally the header - * structure for each packet is tagged accordingly. - */ - return DSA_TAG_PROTO_TRAILER; -} - -static int rtl838x_get_l2aging(struct rtl838x_switch_priv *priv) -{ - int t = sw_r32(priv->r->l2_ctrl_1); - - t &= priv->family_id == RTL8380_FAMILY_ID ? 0x7fffff : 0x1FFFFF; - - if (priv->family_id == RTL8380_FAMILY_ID) - t = t * 128 / 625; /* Aging time in seconds. 0: L2 aging disabled */ - else - t = (t * 3) / 5; - - pr_info("L2 AGING time: %d sec\n", t); - pr_info("Dynamic aging for ports: %x\n", sw_r32(priv->r->l2_port_aging_out)); - return t; -} - -/* - * Set Switch L2 Aging time, t is time in milliseconds - * t = 0: aging is disabled - */ -static int rtl838x_set_l2aging(struct dsa_switch *ds, u32 t) -{ - struct rtl838x_switch_priv *priv = ds->priv; - int t_max = priv->family_id == RTL8380_FAMILY_ID ? 0x7fffff : 0x1FFFFF; - - /* Convert time in mseconds to internal value */ - if (t > 0x10000000) { /* Set to maximum */ - t = t_max; - } else { - if (priv->family_id == RTL8380_FAMILY_ID) - t = ((t * 625) / 1000 + 127) / 128; - else - t = (t * 5 + 2) / 3; - } - sw_w32(t, priv->r->l2_ctrl_1); - return 0; -} - -static void rtl838x_fast_age(struct dsa_switch *ds, int port) -{ - struct rtl838x_switch_priv *priv = ds->priv; - int s = priv->family_id == RTL8390_FAMILY_ID ? 2 : 0; - - pr_info("FAST AGE port %d\n", port); - mutex_lock(&priv->reg_mutex); - /* RTL838X_L2_TBL_FLUSH_CTRL register bits, 839x has 1 bit larger - * port fields: - * 0-4: Replacing port - * 5-9: Flushed/replaced port - * 10-21: FVID - * 22: Entry types: 1: dynamic, 0: also static - * 23: Match flush port - * 24: Match FVID - * 25: Flush (0) or replace (1) L2 entries - * 26: Status of action (1: Start, 0: Done) - */ - sw_w32(1 << (26 + s) | 1 << (23 + s) | port << (5 + (s / 2)), priv->r->l2_tbl_flush_ctrl); - - do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & (1 << (26 + s))); - - mutex_unlock(&priv->reg_mutex); -} - -/* - * Applies the same hash algorithm as the one used currently by the ASIC - */ -static u32 rtl838x_hash(struct rtl838x_switch_priv *priv, u64 seed) -{ - u32 h1, h2, h3, h; - - if (sw_r32(priv->r->l2_ctrl_0) & 1) { - h1 = (seed >> 11) & 0x7ff; - h1 = ((h1 & 0x1f) << 6) | ((h1 >> 5) & 0x3f); - - h2 = (seed >> 33) & 0x7ff; - h2 = ((h2 & 0x3f) << 5) | ((h2 >> 6) & 0x1f); - - h3 = (seed >> 44) & 0x7ff; - h3 = ((h3 & 0x7f) << 4) | ((h3 >> 7) & 0xf); - - h = h1 ^ h2 ^ h3 ^ ((seed >> 55) & 0x1ff); - h ^= ((seed >> 22) & 0x7ff) ^ (seed & 0x7ff); - } else { - h = ((seed >> 55) & 0x1ff) ^ ((seed >> 44) & 0x7ff) - ^ ((seed >> 33) & 0x7ff) ^ ((seed >> 22) & 0x7ff) - ^ ((seed >> 11) & 0x7ff) ^ (seed & 0x7ff); - } - - return h; -} - -static u32 rtl839x_hash(struct rtl838x_switch_priv *priv, u64 seed) -{ - u32 h1, h2, h; - - if (sw_r32(priv->r->l2_ctrl_0) & 1) { - h1 = (u32) (((seed >> 60) & 0x3f) ^ ((seed >> 54) & 0x3f) - ^ ((seed >> 36) & 0x3f) ^ ((seed >> 30) & 0x3f) - ^ ((seed >> 12) & 0x3f) ^ ((seed >> 6) & 0x3f)); - h2 = (u32) (((seed >> 48) & 0x3f) ^ ((seed >> 42) & 0x3f) - ^ ((seed >> 24) & 0x3f) ^ ((seed >> 18) & 0x3f) - ^ (seed & 0x3f)); - h = (h1 << 6) | h2; - } else { - h = (seed >> 60) - ^ ((((seed >> 48) & 0x3f) << 6) | ((seed >> 54) & 0x3f)) - ^ ((seed >> 36) & 0xfff) ^ ((seed >> 24) & 0xfff) - ^ ((seed >> 12) & 0xfff) ^ (seed & 0xfff); - } - - return h; -} - -static u64 rtl838x_hash_key(struct rtl838x_switch_priv *priv, u64 mac, u32 vid) -{ - if (priv->family_id == RTL8380_FAMILY_ID) - return rtl838x_hash(priv, mac << 12 | vid); - else - return rtl839x_hash(priv, mac << 12 | vid); -} - -static void rtl838x_write_cam(int idx, u32 *r) -{ - u32 cmd = 1 << 16 /* Execute cmd */ - | 1 << 15 /* Read */ - | 1 << 13 /* Table type 0b01 */ - | (idx & 0x3f); - - sw_w32(r[0], RTL838X_TBL_ACCESS_L2_DATA(0)); - sw_w32(r[1], RTL838X_TBL_ACCESS_L2_DATA(1)); - sw_w32(r[2], RTL838X_TBL_ACCESS_L2_DATA(2)); - - sw_w32(cmd, RTL838X_TBL_ACCESS_L2_CTRL); - do { } while (sw_r32(RTL838X_TBL_ACCESS_L2_CTRL) & (1 << 16)); -} - -static void rtl838x_write_hash(int idx, u32 *r) -{ - u32 cmd = 1 << 16 /* Execute cmd */ - | 0 << 15 /* Write */ - | 0 << 13 /* Table type 0b00 */ - | (idx & 0x1fff); - - sw_w32(0, RTL838X_TBL_ACCESS_L2_DATA(0)); - sw_w32(0, RTL838X_TBL_ACCESS_L2_DATA(1)); - sw_w32(0, RTL838X_TBL_ACCESS_L2_DATA(2)); - sw_w32(cmd, RTL838X_TBL_ACCESS_L2_CTRL); - do { } while (sw_r32(RTL838X_TBL_ACCESS_L2_CTRL) & (1 << 16)); -} - -static void dump_fdb(struct rtl838x_switch_priv *priv) -{ - struct rtl838x_l2_entry e; - int i; - - mutex_lock(&priv->reg_mutex); - - for (i = 0; i < priv->fib_entries; i++) { - priv->r->read_l2_entry_using_hash(i >> 2, i & 0x3, &e); - - if (!e.valid) /* Check for invalid entry */ - continue; - - pr_info("-> port %02d: mac %pM, vid: %d, rvid: %d, MC: %d, %d\n", - e.port, &e.mac[0], e.vid, e.rvid, e.is_ip_mc, e.is_ipv6_mc); - } - - mutex_unlock(&priv->reg_mutex); -} - -static void rtl838x_port_get_stp_state(struct rtl838x_switch_priv *priv, int port) -{ - u32 cmd, msti = 0; - u32 port_state[4]; - int index, bit, i; - int pos = port; - int n = priv->family_id == RTL8380_FAMILY_ID ? 2 : 4; - - /* CPU PORT can only be configured on RTL838x */ - if (port >= priv->cpu_port || port > 51) - return; - - mutex_lock(&priv->reg_mutex); - - /* For the RTL839x, the bits are left-aligned in the 128 bit field */ - if (priv->family_id == RTL8390_FAMILY_ID) - pos += 12; - - index = n - (pos >> 4) - 1; - bit = (pos << 1) % 32; - - if (priv->family_id == RTL8380_FAMILY_ID) { - cmd = 1 << 15 /* Execute cmd */ - | 1 << 14 /* Read */ - | 2 << 12 /* Table type 0b10 */ - | (msti & 0xfff); - } else { - cmd = 1 << 16 /* Execute cmd */ - | 0 << 15 /* Read */ - | 5 << 12 /* Table type 0b101 */ - | (msti & 0xfff); - } - priv->r->exec_tbl0_cmd(cmd); - - for (i = 0; i < n; i++) - port_state[i] = sw_r32(priv->r->tbl_access_data_0(i)); - - mutex_unlock(&priv->reg_mutex); -} - -static int rtl838x_port_fdb_dump(struct dsa_switch *ds, int port, - dsa_fdb_dump_cb_t *cb, void *data) -{ - struct rtl838x_l2_entry e; - struct rtl838x_switch_priv *priv = ds->priv; - int i; - u32 fid; - u32 pkey; - u64 mac; - - mutex_lock(&priv->reg_mutex); - - for (i = 0; i < priv->fib_entries; i++) { - priv->r->read_l2_entry_using_hash(i >> 2, i & 0x3, &e); - - if (!e.valid) - continue; - - if (e.port == port) { - fid = (i & 0x3ff) | (e.rvid & ~0x3ff); - mac = ether_addr_to_u64(&e.mac[0]); - pkey = rtl838x_hash(priv, mac << 12 | fid); - fid = (pkey & 0x3ff) | (fid & ~0x3ff); - pr_info("-> mac %016llx, fid: %d\n", mac, fid); - cb(e.mac, e.vid, e.is_static, data); - } - } - - for (i = 0; i < 64; i++) { - priv->r->read_cam(i, &e); - - if (!e.valid) - continue; - - if (e.port == port) - cb(e.mac, e.vid, e.is_static, data); - } - - mutex_unlock(&priv->reg_mutex); - return 0; -} - -static int rtl838x_port_fdb_del(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 mac = ether_addr_to_u64(addr); - u32 key = rtl838x_hash_key(priv, mac, vid); - struct rtl838x_l2_entry e; - u32 r[3]; - u64 entry; - int idx = -1, err = 0, i; - - pr_info("In %s, mac %llx, vid: %d, key: %x\n", __func__, mac, vid, key); - mutex_lock(&priv->reg_mutex); - for (i = 0; i < 4; i++) { - entry = priv->r->read_l2_entry_using_hash(key, i, &e); - if (!e.valid) - continue; - if ((entry & 0x0fffffffffffffffULL) == ((mac << 12) | vid)) { - idx = (key << 2) | i; - break; - } - } - - if (idx >= 0) { - r[0] = r[1] = r[2] = 0; - rtl838x_write_hash(idx, r); - goto out; - } - - /* Check CAM for spillover from hash buckets */ - for (i = 0; i < 64; i++) { - entry = priv->r->read_cam(i, &e); - if ((entry & 0x0fffffffffffffffULL) == ((mac << 12) | vid)) { - idx = i; - break; - } - } - if (idx >= 0) { - r[0] = r[1] = r[2] = 0; - rtl838x_write_cam(idx, r); - goto out; - } - err = -ENOENT; -out: - mutex_unlock(&priv->reg_mutex); - return err; -} - -static int rtl838x_port_fdb_add(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 mac = ether_addr_to_u64(addr); - u32 key = rtl838x_hash_key(priv, mac, vid); - struct rtl838x_l2_entry e; - u32 r[3]; - u64 entry; - int idx = -1, err = 0, i; - - mutex_lock(&priv->reg_mutex); - for (i = 0; i < 4; i++) { - entry = priv->r->read_l2_entry_using_hash(key, i, &e); - if (!e.valid) { - idx = (key << 2) | i; - break; - } - if ((entry & 0x0fffffffffffffffULL) == ((mac << 12) | vid)) { - idx = (key << 2) | i; - break; - } - } - if (idx >= 0) { - r[0] = 3 << 17 | port << 12; // Aging and port - r[0] |= vid; - r[1] = mac >> 16; - r[2] = (mac & 0xffff) << 12; /* rvid = 0 */ - rtl838x_write_hash(idx, r); - goto out; - } - - /* Hash buckets full, try CAM */ - for (i = 0; i < 64; i++) { - entry = rtl838x_read_cam(i, &e); - if (!e.valid) { - if (idx < 0) /* First empty entry? */ - idx = i; - break; - } else if ((entry & 0x0fffffffffffffffULL) == ((mac << 12) | vid)) { - pr_debug("Found entry in CAM\n"); - idx = i; - break; - } - } - if (idx >= 0) { - r[0] = 3 << 17 | port << 12; // Aging - r[0] |= vid; - r[1] = mac >> 16; - r[2] = (mac & 0xffff) << 12; /* rvid = 0 */ - rtl838x_write_cam(idx, r); - goto out; - } - err = -ENOTSUPP; -out: - mutex_unlock(&priv->reg_mutex); - return err; -} - -static void rtl838x_port_stp_state_set(struct dsa_switch *ds, int port, - u8 state) -{ - u32 cmd, msti = 0; - u32 port_state[4]; - int index, bit, i; - int pos = port; - struct rtl838x_switch_priv *priv = ds->priv; - int n = priv->family_id == RTL8380_FAMILY_ID ? 2 : 4; - - pr_info("%s: port %d state %2x\n", __func__, port, state); - - /* CPU PORT can only be configured on RTL838x */ - if (port >= priv->cpu_port || port > 51) - return; - - mutex_lock(&priv->reg_mutex); - - /* For the RTL839x, the bits are left-aligned in the 128 bit field */ - if (priv->family_id == RTL8390_FAMILY_ID) - pos += 12; - - index = n - (pos >> 4) - 1; - bit = (pos << 1) % 32; - - if (priv->family_id == RTL8380_FAMILY_ID) { - cmd = 1 << 15 /* Execute cmd */ - | 1 << 14 /* Read */ - | 2 << 12 /* Table type 0b10 */ - | (msti & 0xfff); - } else { - cmd = 1 << 16 /* Execute cmd */ - | 0 << 15 /* Read */ - | 5 << 12 /* Table type 0b101 */ - | (msti & 0xfff); - } - priv->r->exec_tbl0_cmd(cmd); - - for (i = 0; i < n; i++) - port_state[i] = sw_r32(priv->r->tbl_access_data_0(i)); - - pr_debug("Current state, port %d: %d\n", port, (port_state[index] >> bit) & 3); - port_state[index] &= ~(3 << bit); - - switch (state) { - case BR_STATE_DISABLED: /* 0 */ - port_state[index] |= (0 << bit); - break; - case BR_STATE_BLOCKING: /* 4 */ - case BR_STATE_LISTENING: /* 1 */ - port_state[index] |= (1 << bit); - break; - case BR_STATE_LEARNING: /* 2 */ - port_state[index] |= (2 << bit); - break; - case BR_STATE_FORWARDING: /* 3*/ - port_state[index] |= (3 << bit); - default: - break; - } - - if (priv->family_id == RTL8380_FAMILY_ID) { - cmd = 1 << 15 /* Execute cmd */ - | 0 << 14 /* Write */ - | 2 << 12 /* Table type 0b10 */ - | (msti & 0xfff); - } else { - cmd = 1 << 16 /* Execute cmd */ - | 1 << 15 /* Write */ - | 5 << 12 /* Table type 0b101 */ - | (msti & 0xfff); - } - for (i = 0; i < n; i++) - sw_w32(port_state[i], priv->r->tbl_access_data_0(i)); - priv->r->exec_tbl0_cmd(cmd); - - mutex_unlock(&priv->reg_mutex); -} - -static int rtl838x_port_mirror_add(struct dsa_switch *ds, int port, - struct dsa_mall_mirror_tc_entry *mirror, - bool ingress) -{ - /* We support 4 mirror groups, one destination port per group */ - int group; - struct rtl838x_switch_priv *priv = ds->priv; - - pr_info("In %s\n", __func__); - - for (group = 0; group < 4; group++) { - if (priv->mirror_group_ports[group] == mirror->to_local_port) - break; - } - if (group >= 4) { - for (group = 0; group < 4; group++) { - if (priv->mirror_group_ports[group] < 0) - break; - } - } - - if (group >= 4) - return -ENOSPC; - - pr_debug("Using group %d\n", group); - mutex_lock(&priv->reg_mutex); - - if (priv->family_id == RTL8380_FAMILY_ID) { - /* Enable mirroring to port across VLANs (bit 11) */ - sw_w32(1 << 11 | (mirror->to_local_port << 4) | 1, RTL838X_MIR_CTRL(group)); - } else { - /* Enable mirroring to destination port */ - sw_w32((mirror->to_local_port << 4) | 1, RTL839X_MIR_CTRL(group)); - } - - if (ingress && (priv->r->get_port_reg_be(priv->r->mir_spm(group)) & (1ULL << port))) { - mutex_unlock(&priv->reg_mutex); - return -EEXIST; - } - if ((!ingress) && (priv->r->get_port_reg_be(priv->r->mir_dpm(group)) & (1ULL << port))) { - mutex_unlock(&priv->reg_mutex); - return -EEXIST; - } - - if (ingress) - priv->r->mask_port_reg_be(0, 1ULL << port, priv->r->mir_spm(group)); - else - priv->r->mask_port_reg_be(0, 1ULL << port, priv->r->mir_dpm(group)); - - priv->mirror_group_ports[group] = mirror->to_local_port; - mutex_unlock(&priv->reg_mutex); - return 0; -} - -static void rtl838x_port_mirror_del(struct dsa_switch *ds, int port, - struct dsa_mall_mirror_tc_entry *mirror) -{ - int group = 0; - struct rtl838x_switch_priv *priv = ds->priv; - - pr_info("In %s\n", __func__); - for (group = 0; group < 4; group++) { - if (priv->mirror_group_ports[group] == mirror->to_local_port) - break; - } - if (group >= 4) - return; - - mutex_lock(&priv->reg_mutex); - if (mirror->ingress) { - /* Ingress, clear source port matrix */ - priv->r->mask_port_reg_be(1ULL << port, 0, priv->r->mir_spm(group)); - } else { - /* Egress, clear destination port matrix */ - priv->r->mask_port_reg_be(1ULL << port, 0, priv->r->mir_dpm(group)); - } - - if (!(sw_r32(priv->r->mir_spm(group)) || sw_r32(priv->r->mir_dpm(group)))) { - priv->mirror_group_ports[group] = -1; - sw_w32(0, priv->r->mir_ctrl(group)); - } - - mutex_unlock(&priv->reg_mutex); -} - -void rtl838x_vlan_profile_dump(int index) -{ - u32 profile; - - if (index < 0 || index > 7) - return; - - profile = sw_r32(rtl838x_vlan_profile(index)); - - pr_info("VLAN %d: L2 learning: %d, L2 Unknown MultiCast Field %x, \ - IPv4 Unknown MultiCast Field %x, IPv6 Unknown MultiCast Field: %x", - index, profile & 1, (profile >> 1) & 0x1ff, (profile >> 10) & 0x1ff, - (profile >> 19) & 0x1ff); -} - -void rtl839x_vlan_profile_dump(int index) -{ - u32 profile, profile1; - - if (index < 0 || index > 7) - return; - - profile1 = sw_r32(rtl839x_vlan_profile(index) + 4); - profile = sw_r32(rtl839x_vlan_profile(index)); - - pr_info("VLAN %d: L2 learning: %d, L2 Unknown MultiCast Field %x, \ - IPv4 Unknown MultiCast Field %x, IPv6 Unknown MultiCast Field: %x", - index, profile & 1, (profile >> 1) & 0xfff, (profile >> 13) & 0xfff, - (profile1) & 0xfff); -} - -static int rtl838x_vlan_filtering(struct dsa_switch *ds, int port, - bool vlan_filtering) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - pr_info("%s: port %d\n", __func__, port); - mutex_lock(&priv->reg_mutex); - - if (vlan_filtering) { - /* Enable ingress and egress filtering */ - if (port != priv->cpu_port) - sw_w32_mask(0b10 << ((port % 16) << 1), 0b01 << ((port % 16) << 1), - priv->r->vlan_port_igr_filter(port)); - sw_w32_mask(0, 1 << (port % 32), priv->r->vlan_port_egr_filter(port)); - } else { - /* Disable ingress and egress filtering */ - if (port != priv->cpu_port) - sw_w32_mask(0b11 << ((port % 16) << 1), 0, - priv->r->vlan_port_igr_filter(port)); - sw_w32_mask(1 << (port % 32), 0, priv->r->vlan_port_egr_filter(port)); - } - - /* Do we need to do something to the CPU-Port, too? */ - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static int rtl838x_vlan_prepare(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - struct rtl838x_vlan_info info; - struct rtl838x_switch_priv *priv = ds->priv; - - pr_info("%s: port %d\n", __func__, port); - - mutex_lock(&priv->reg_mutex); - - if (priv->family_id == RTL8380_FAMILY_ID) - rtl839x_vlan_profile_dump(0); - else - rtl839x_vlan_profile_dump(0); - - priv->r->vlan_tables_read(0, &info); - - pr_info("Tagged ports %llx, untag %llx, prof %x, MC# %d, UC# %d, FID %x\n", - info.tagged_ports, info.untagged_ports, info.profile_id, - info.hash_mc, info.hash_uc, info.fid); - - mutex_unlock(&priv->reg_mutex); - return 0; -} - -static void rtl838x_vlan_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - struct rtl838x_vlan_info info; - struct rtl838x_switch_priv *priv = ds->priv; - int v; - u64 portmask; - - pr_info("%s port %d, vid_end %d, vid_end %d, flags %x\n", __func__, - port, vlan->vid_begin, vlan->vid_end, vlan->flags); - - if (vlan->vid_begin > 4095 || vlan->vid_end > 4095) { - dev_err(priv->dev, "VLAN out of range: %d - %d", - vlan->vid_begin, vlan->vid_end); - return; - } - - mutex_lock(&priv->reg_mutex); - - if (vlan->flags & BRIDGE_VLAN_INFO_PVID) { - for (v = vlan->vid_begin; v <= vlan->vid_end; v++) { - /* Set both inner and outer PVID of the port */ - sw_w32((v << 16) | v, priv->r->vlan_port_pb(port)); - } - } - - if (vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED) { - for (v = vlan->vid_begin; v <= vlan->vid_end; v++) { - /* Get untagged port memberships of this vlan */ - priv->r->vlan_tables_read(v, &info); - portmask = info.untagged_ports | (1 << port); - pr_debug("Untagged ports, VLAN %d: %llx\n", v, portmask); - priv->r->vlan_set_untagged(v, portmask); - } - } else { - for (v = vlan->vid_begin; v <= vlan->vid_end; v++) { - /* Get tagged port memberships of this vlan */ - priv->r->vlan_tables_read(v, &info); - info.tagged_ports |= (1 << port); - pr_debug("Tagged ports, VLAN %d: %llx\n", v, info.tagged_ports); - priv->r->vlan_set_tagged(v, &info); - } - } - - mutex_unlock(&priv->reg_mutex); -} - -static int rtl838x_vlan_del(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - struct rtl838x_vlan_info info; - struct rtl838x_switch_priv *priv = ds->priv; - int v; - u64 portmask; - - pr_info("%s: port %d, vid_end %d, vid_end %d, flags %x\n", __func__, - port, vlan->vid_begin, vlan->vid_end, vlan->flags); - - if (vlan->vid_begin > 4095 || vlan->vid_end > 4095) { - dev_err(priv->dev, "VLAN out of range: %d - %d", - vlan->vid_begin, vlan->vid_end); - return -ENOTSUPP; - } - - mutex_lock(&priv->reg_mutex); - - for (v = vlan->vid_begin; v <= vlan->vid_end; v++) { - /* Reset both inner and out PVID of the port */ - sw_w32(0, priv->r->vlan_port_pb(port)); - - if (vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED) { - /* Get untagged port memberships of this vlan */ - priv->r->vlan_tables_read(v, &info); - portmask = info.untagged_ports & (~(1ULL << port)); - pr_info("Untagged ports, VLAN %d: %llx\n", v, portmask); - priv->r->vlan_set_untagged(v, portmask); - } - - /* Get tagged port memberships of this vlan */ - priv->r->vlan_tables_read(v, &info); - info.tagged_ports &= (~(1ULL << port)); - pr_info("Tagged ports, VLAN %d: %llx\n", v, info.tagged_ports); - priv->r->vlan_set_tagged(v, &info); - } - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static void rtl838x_port_bridge_leave(struct dsa_switch *ds, int port, - struct net_device *bridge) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 port_bitmap = 1ULL << priv->cpu_port; - int i; - - pr_info("%s %x: %d", __func__, (u32)priv, port); - mutex_lock(&priv->reg_mutex); - for (i = 0; i < ds->num_ports; i++) { - /* Remove this port from the port matrix of the other ports - * in the same bridge. If the port is disabled, port matrix - * is kept and not being setup until the port becomes enabled. - * And the other port's port matrix cannot be broken when the - * other port is still a VLAN-aware port. - */ - if (dsa_is_user_port(ds, i) && i != port) { - if (dsa_to_port(ds, i)->bridge_dev != bridge) - continue; - if (priv->ports[i].enable) - priv->r->mask_port_reg_be(1ULL << port, 0, - priv->r->port_iso_ctrl(i)); - priv->ports[i].pm |= 1ULL << port; - - port_bitmap &= ~(1ULL << i); - } - } - - /* Add all other ports to this port matrix. */ - if (priv->ports[port].enable) - priv->r->mask_port_reg_be(0, port_bitmap, priv->r->port_iso_ctrl(port)); - priv->ports[port].pm &= ~port_bitmap; - mutex_unlock(&priv->reg_mutex); -} - -static int rtl838x_port_bridge_join(struct dsa_switch *ds, int port, - struct net_device *bridge) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 port_bitmap = 1ULL << priv->cpu_port; - int i; - - pr_info("%s %x: %d %llx", __func__, (u32)priv, port, port_bitmap); - mutex_lock(&priv->reg_mutex); - for (i = 0; i < ds->num_ports; i++) { - /* Add this port to the port matrix of the other ports in the - * same bridge. If the port is disabled, port matrix is kept - * and not being setup until the port becomes enabled. - */ - if (dsa_is_user_port(ds, i) && i != port) { - if (dsa_to_port(ds, i)->bridge_dev != bridge) - continue; - if (priv->ports[i].enable) - priv->r->mask_port_reg_be(0, 1ULL << port, - priv->r->port_iso_ctrl(i)); - priv->ports[i].pm |= 1ULL << port; - - port_bitmap |= 1ULL << i; - } - } - - /* Add all other ports to this port matrix. */ - if (priv->ports[port].enable) { - priv->r->mask_port_reg_be(0, 1ULL << port, - priv->r->port_iso_ctrl(priv->cpu_port)); - priv->r->mask_port_reg_be(0, port_bitmap, - priv->r->port_iso_ctrl(port)); - } - priv->ports[port].pm |= port_bitmap; - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static int rtl838x_port_enable(struct dsa_switch *ds, int port, - struct phy_device *phydev) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - pr_info("%s: %x %d", __func__, (u32) priv, port); - priv->ports[port].enable = true; - - if (dsa_is_cpu_port(ds, port)) - return 0; - - /* add port to switch mask of CPU_PORT */ - priv->r->mask_port_reg_be(0, 1ULL << port, priv->r->port_iso_ctrl(priv->cpu_port)); - - /* add all other ports in the same bridge to switch mask of port */ - priv->r->mask_port_reg_be(0, priv->ports[port].pm, priv->r->port_iso_ctrl(port)); - - return 0; -} - -static void rtl838x_port_disable(struct dsa_switch *ds, int port) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - pr_info("%s %x: %d", __func__, (u32)priv, port); - /* you can only disable user ports */ - if (!dsa_is_user_port(ds, port)) - return; - - /* remove port from switch mask of CPU_PORT */ - priv->r->mask_port_reg_be(1ULL << port, 0, priv->r->port_iso_ctrl(priv->cpu_port)); - - /* remove all other ports in the same bridge from switch mask of port */ - priv->r->mask_port_reg_be(priv->ports[port].pm, 0LL, priv->r->port_iso_ctrl(port)); - - priv->ports[port].enable = false; -} - -static int rtl838x_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - pr_info("%s: port %d", __func__, port); - e->supported = SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full; - if (sw_r32(priv->r->mac_force_mode_ctrl(port)) & (1 << 9)) - e->advertised |= ADVERTISED_100baseT_Full; - - if (sw_r32(priv->r->mac_force_mode_ctrl(port)) & (1 << 10)) - e->advertised |= ADVERTISED_1000baseT_Full; - - e->eee_enabled = priv->ports[port].eee_enabled; - pr_info("enabled: %d, active %x\n", e->eee_enabled, e->advertised); - - if (sw_r32(RTL838X_MAC_EEE_ABLTY) & (1 << port)) { - e->lp_advertised = ADVERTISED_100baseT_Full; - e->lp_advertised |= ADVERTISED_1000baseT_Full; - } - - e->eee_active = !!(e->advertised & e->lp_advertised); - pr_info("active: %d, lp %x\n", e->eee_active, e->lp_advertised); - - return 0; -} - -static int rtl838x_set_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - pr_info("%s: port %d", __func__, port); - if (e->eee_enabled) { - pr_info("Globally enabling EEE\n"); - sw_w32_mask(0x4, 0, RTL838X_SMI_GLB_CTRL); - } - if (e->eee_enabled) { - pr_info("Enabling EEE for MAC %d\n", port); - sw_w32_mask(0, 3 << 9, priv->r->mac_force_mode_ctrl(port)); - sw_w32_mask(0, 1 << port, RTL838X_EEE_PORT_TX_EN); - sw_w32_mask(0, 1 << port, RTL838X_EEE_PORT_RX_EN); - priv->ports[port].eee_enabled = true; - e->eee_enabled = true; - } else { - pr_info("Disabling EEE for MAC %d\n", port); - sw_w32_mask(3 << 9, 0, priv->r->mac_force_mode_ctrl(port)); - sw_w32_mask(1 << port, 0, RTL838X_EEE_PORT_TX_EN); - sw_w32_mask(1 << port, 0, RTL838X_EEE_PORT_RX_EN); - priv->ports[port].eee_enabled = false; - e->eee_enabled = false; - } - return 0; -} - -static void rtl838x_phylink_mac_config(struct dsa_switch *ds, int port, - unsigned int mode, - const struct phylink_link_state *state) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u32 reg; - int speed_bit = priv->family_id == RTL8380_FAMILY_ID ? 4 : 3; - - pr_info("%s port %d, mode %x\n", __func__, port, mode); - - if (port == priv->cpu_port) { - /* Set Speed, duplex, flow control - * FORCE_EN | LINK_EN | NWAY_EN | DUP_SEL - * | SPD_SEL = 0b10 | FORCE_FC_EN | PHY_MASTER_SLV_MANUAL_EN - * | MEDIA_SEL - */ - if (priv->family_id == RTL8380_FAMILY_ID) { - sw_w32(0x6192F, priv->r->mac_force_mode_ctrl(priv->cpu_port)); - /* allow CRC errors on CPU-port */ - sw_w32_mask(0, 0x8, RTL838X_MAC_PORT_CTRL(priv->cpu_port)); - } else { - sw_w32_mask(0, 3, priv->r->mac_force_mode_ctrl(priv->cpu_port)); - } - return; - } - - reg = sw_r32(priv->r->mac_force_mode_ctrl(port)); - /* Auto-Negotiation does not work for MAC in RTL8390 */ - if (priv->family_id == RTL8380_FAMILY_ID) { - if (mode == MLO_AN_PHY) { - pr_info("PHY autonegotiates\n"); - reg |= 1 << 2; - sw_w32(reg, priv->r->mac_force_mode_ctrl(port)); - return; - } - } - - if (mode != MLO_AN_FIXED) - pr_info("Fixed state.\n"); - - if (priv->family_id == RTL8380_FAMILY_ID) { - /* Clear id_mode_dis bit, and the existing port mode, let - * RGMII_MODE_EN bet set by mac_link_{up,down} - */ - reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN); - - if (state->pause & MLO_PAUSE_TXRX_MASK) { - if (state->pause & MLO_PAUSE_TX) - reg |= TX_PAUSE_EN; - reg |= RX_PAUSE_EN; - } - } - - reg &= ~(3 << speed_bit); - switch (state->speed) { - case SPEED_1000: - reg |= 2 << speed_bit; - break; - case SPEED_100: - reg |= 1 << speed_bit; - break; - } - - if (priv->family_id == RTL8380_FAMILY_ID) { - reg &= ~(DUPLEX_FULL | FORCE_LINK_EN); - if (state->link) - reg |= FORCE_LINK_EN; - if (state->duplex == DUPLEX_FULL) - reg |= DUPLX_MODE; - } - - // Disable AN - if (priv->family_id == RTL8380_FAMILY_ID) - reg &= ~(1 << 2); - sw_w32(reg, priv->r->mac_force_mode_ctrl(port)); -} - -static void rtl838x_phylink_mac_link_down(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface) -{ - struct rtl838x_switch_priv *priv = ds->priv; - /* Stop TX/RX to port */ - sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(port)); -} - -static void rtl838x_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, - struct phy_device *phydev) -{ - struct rtl838x_switch_priv *priv = ds->priv; - /* Restart TX/RX to port */ - sw_w32_mask(0, 0x3, priv->r->mac_port_ctrl(port)); -} - -static void rtl838x_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) -{ - struct rtl838x_switch_priv *priv = ds->priv; - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - - pr_info("In %s port %d", __func__, port); - - if (!phy_interface_mode_is_rgmii(state->interface) && - state->interface != PHY_INTERFACE_MODE_1000BASEX && - state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_REVMII && - state->interface != PHY_INTERFACE_MODE_GMII && - state->interface != PHY_INTERFACE_MODE_QSGMII && - state->interface != PHY_INTERFACE_MODE_INTERNAL && - state->interface != PHY_INTERFACE_MODE_SGMII) { - bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); - dev_err(ds->dev, - "Unsupported interface: %d for port %d\n", - state->interface, port); - return; - } - - /* Allow all the expected bits */ - phylink_set(mask, Autoneg); - phylink_set_port_modes(mask); - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); - - /* With the exclusion of MII and Reverse MII, we support Gigabit, - * including Half duplex - */ - if (state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_REVMII) { - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseT_Half); - } - - /* On both the 8380 and 8382, ports 24-27 are SFP ports */ - if (port >= 24 && port <= 27 && priv->family_id == RTL8380_FAMILY_ID) - phylink_set(mask, 1000baseX_Full); - - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 100baseT_Full); - - bitmap_and(supported, supported, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); - bitmap_and(state->advertising, state->advertising, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); -} - -static int rtl838x_phylink_mac_link_state(struct dsa_switch *ds, int port, - struct phylink_link_state *state) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 speed; - - if (port < 0 || port > priv->cpu_port) - return -EINVAL; - - state->link = 0; - if (priv->r->get_port_reg_le(priv->r->mac_link_sts) & (1ULL << port)) - state->link = 1; - state->duplex = 0; - if (priv->r->get_port_reg_le(priv->r->mac_link_dup_sts) & (1ULL << port)) - state->duplex = 1; - - speed = priv->r->get_port_reg_le(priv->r->mac_link_spd_sts(port)); - speed >>= (port % 16) << 1; - switch (speed & 0x3) { - case 0: - state->speed = SPEED_10; - break; - case 1: - state->speed = SPEED_100; - break; - case 2: - state->speed = SPEED_1000; - break; - case 3: - if (port == 24 || port == 26) /* Internal serdes */ - state->speed = SPEED_2500; - else - state->speed = SPEED_100; /* Is in fact 500Mbit */ - } - - state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX); - if (priv->r->get_port_reg_le(priv->r->mac_rx_pause_sts) & (1ULL << port)) - state->pause |= MLO_PAUSE_RX; - if (priv->r->get_port_reg_le(priv->r->mac_tx_pause_sts) & (1ULL << port)) - state->pause |= MLO_PAUSE_TX; - return 1; -} - -static int rtl838x_mdio_probe(struct rtl838x_switch_priv *priv) -{ - struct device *dev = priv->dev; - struct device_node *dn, *mii_np = dev->of_node; - struct mii_bus *bus; - int ret; - u32 pn; - - pr_info("In %s\n", __func__); - mii_np = of_find_compatible_node(NULL, NULL, "realtek,rtl838x-mdio"); - if (mii_np) { - pr_info("Found compatible MDIO node!\n"); - } else { - dev_err(priv->dev, "no %s child node found", "mdio-bus"); - return -ENODEV; - } - - priv->mii_bus = of_mdio_find_bus(mii_np); - if (!priv->mii_bus) { - pr_info("Deferring probe of mdio bus\n"); - return -EPROBE_DEFER; - } - if (!of_device_is_available(mii_np)) - ret = -ENODEV; - - bus = devm_mdiobus_alloc(priv->ds->dev); - if (!bus) - return -ENOMEM; - - bus->name = "rtl838x slave mii"; - bus->read = &rtl838x_mdio_read; - bus->write = &rtl838x_mdio_write; - snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", bus->name, dev->id); - bus->parent = dev; - priv->ds->slave_mii_bus = bus; - priv->ds->slave_mii_bus->priv = priv; - - ret = mdiobus_register(priv->ds->slave_mii_bus); - if (ret && mii_np) { - of_node_put(dn); - return ret; - } - - dn = mii_np; - for_each_node_by_name(dn, "ethernet-phy") { - if (of_property_read_u32(dn, "reg", &pn)) - continue; - - // Check for the integrated SerDes of the RTL8380M first - if (of_property_read_bool(dn, "phy-is-integrated") - && priv->id == 0x8380 && pn >= 24) { - pr_info("----> FÓUND A SERDES\n"); - priv->ports[pn].phy = PHY_RTL838X_SDS; - continue; - } - - if (of_property_read_bool(dn, "phy-is-integrated") - && !of_property_read_bool(dn, "sfp")) { - priv->ports[pn].phy = PHY_RTL8218B_INT; - continue; - } - - if (!of_property_read_bool(dn, "phy-is-integrated") - && of_property_read_bool(dn, "sfp")) { - priv->ports[pn].phy = PHY_RTL8214FC; - continue; - } - - if (!of_property_read_bool(dn, "phy-is-integrated") - && !of_property_read_bool(dn, "sfp")) { - priv->ports[pn].phy = PHY_RTL8218B_EXT; - continue; - } - } - - /* Disable MAC polling the PHY so that we can start configuration */ - priv->r->set_port_reg_le(0ULL, priv->r->smi_poll_ctrl); - - /* Enable PHY control via SoC */ - if (priv->family_id == RTL8380_FAMILY_ID) { - /* Enable PHY control via SoC */ - sw_w32_mask(0, 1 << 15, RTL838X_SMI_GLB_CTRL); - } else { - /* Disable PHY polling via SoC */ - sw_w32_mask(1 << 7, 0, RTL839X_SMI_GLB_CTRL); - } - - /* Power on fibre ports and reset them if necessary */ - if (priv->ports[24].phy == PHY_RTL838X_SDS) { - pr_info("Powering on fibre ports & reset\n"); - rtl8380_sds_power(24, 1); - rtl8380_sds_power(26, 1); - } - - pr_info("%s done\n", __func__); - return 0; -} - -static const struct dsa_switch_ops rtl838x_switch_ops = { - .get_tag_protocol = rtl838x_get_tag_protocol, - .setup = rtl838x_setup, - .port_vlan_filtering = rtl838x_vlan_filtering, - .port_vlan_prepare = rtl838x_vlan_prepare, - .port_vlan_add = rtl838x_vlan_add, - .port_vlan_del = rtl838x_vlan_del, - .port_bridge_join = rtl838x_port_bridge_join, - .port_bridge_leave = rtl838x_port_bridge_leave, - .port_stp_state_set = rtl838x_port_stp_state_set, - .set_ageing_time = rtl838x_set_l2aging, - .port_fast_age = rtl838x_fast_age, - .port_fdb_add = rtl838x_port_fdb_add, - .port_fdb_del = rtl838x_port_fdb_del, - .port_fdb_dump = rtl838x_port_fdb_dump, - .port_enable = rtl838x_port_enable, - .port_disable = rtl838x_port_disable, - .port_mirror_add = rtl838x_port_mirror_add, - .port_mirror_del = rtl838x_port_mirror_del, - .phy_read = dsa_phy_read, - .phy_write = dsa_phy_write, - .get_strings = rtl838x_get_strings, - .get_ethtool_stats = rtl838x_get_ethtool_stats, - .get_sset_count = rtl838x_get_sset_count, - .phylink_validate = rtl838x_phylink_validate, - .phylink_mac_link_state = rtl838x_phylink_mac_link_state, - .phylink_mac_config = rtl838x_phylink_mac_config, - .phylink_mac_link_down = rtl838x_phylink_mac_link_down, - .phylink_mac_link_up = rtl838x_phylink_mac_link_up, - .set_mac_eee = rtl838x_set_mac_eee, - .get_mac_eee = rtl838x_get_mac_eee, -}; - -static int __init rtl838x_sw_probe(struct platform_device *pdev) -{ - int err = 0, i; - struct rtl838x_switch_priv *priv; - struct device *dev = &pdev->dev; - u64 irq_mask; - - pr_info("Probing RTL838X switch device\n"); - if (!pdev->dev.of_node) { - dev_err(dev, "No DT found\n"); - return -EINVAL; - } - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->ds = dsa_switch_alloc(dev, DSA_MAX_PORTS); - - if (!priv->ds) - return -ENOMEM; - priv->ds->dev = dev; - priv->ds->priv = priv; - priv->ds->ops = &rtl838x_switch_ops; - priv->dev = dev; - - priv->family_id = soc_info.family; - priv->id = soc_info.id; - if (soc_info.family == RTL8380_FAMILY_ID) { - priv->cpu_port = RTL838X_CPU_PORT; - priv->port_mask = 0x1f; - priv->r = &rtl838x_reg; - priv->ds->num_ports = 30; - priv->fib_entries = 8192; - rtl8380_get_version(priv); - } else { - priv->cpu_port = RTL839X_CPU_PORT; - priv->port_mask = 0x3f; - priv->r = &rtl839x_reg; - priv->ds->num_ports = 53; - priv->fib_entries = 16384; - rtl8390_get_version(priv); - } - pr_info("Chip version %c\n", priv->version); - - err = rtl838x_mdio_probe(priv); - if (err) { - /* Probing fails the 1st time because of missing ethernet driver - * initialization. Use this to disable traffic in case the bootloader left if on - */ - return err; - } - err = dsa_register_switch(priv->ds); - if (err) { - dev_err(dev, "Error registering switch: %d\n", err); - return err; - } - - /* Enable link and media change interrupts. Are the SERDES masks needed? */ - sw_w32_mask(0, 3, priv->r->isr_glb_src); - /* ... for all ports */ - irq_mask = soc_info.family == RTL8380_FAMILY_ID ? 0x0FFFFFFF : 0xFFFFFFFFFFFFFULL; - priv->r->set_port_reg_le(irq_mask, priv->r->isr_port_link_sts_chg); - priv->r->set_port_reg_le(irq_mask, priv->r->imr_port_link_sts_chg); - - priv->link_state_irq = 20; - if (priv->family_id == RTL8380_FAMILY_ID) { - err = request_irq(priv->link_state_irq, rtl838x_switch_irq, - IRQF_SHARED, "rtl838x-link-state", priv->ds); - } else { - err = request_irq(priv->link_state_irq, rtl839x_switch_irq, - IRQF_SHARED, "rtl838x-link-state", priv->ds); - } - if (err) { - dev_err(dev, "Error setting up switch interrupt.\n"); - /* Need to free allocated switch here */ - } - - /* Enable interrupts for switch */ - sw_w32(0x1, priv->r->imr_glb); - - rtl838x_get_l2aging(priv); - - /* Clear all destination ports for mirror groups */ - for (i = 0; i < 4; i++) - priv->mirror_group_ports[i] = -1; - - return err; -} - -static int rtl838x_sw_remove(struct platform_device *pdev) -{ - pr_info("Removing platform driver for rtl838x-sw\n"); - return 0; -} - -static const struct of_device_id rtl838x_switch_of_ids[] = { - { .compatible = "realtek,rtl838x-switch"}, - { /* sentinel */ } -}; - - -MODULE_DEVICE_TABLE(of, rtl838x_switch_of_ids); - -static struct platform_driver rtl838x_switch_driver = { - .probe = rtl838x_sw_probe, - .remove = rtl838x_sw_remove, - .driver = { - .name = "rtl838x-switch", - .pm = NULL, - .of_match_table = rtl838x_switch_of_ids, - }, -}; - -module_platform_driver(rtl838x_switch_driver); - -MODULE_AUTHOR("B. Koblitz"); -MODULE_DESCRIPTION("RTL838X SoC Switch Driver"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/rtl838x/patches-5.4/700-net-dsa-add-support-for-rtl838x-switch.patch b/target/linux/rtl838x/patches-5.4/700-net-dsa-add-support-for-rtl838x-switch.patch deleted file mode 100644 index 7dd12b7917..0000000000 --- a/target/linux/rtl838x/patches-5.4/700-net-dsa-add-support-for-rtl838x-switch.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/net/dsa/Kconfig -+++ b/drivers/net/dsa/Kconfig -@@ -75,6 +75,13 @@ config NET_DSA_REALTEK_SMI - This enables support for the Realtek SMI-based switch - chips, currently only RTL8366RB. - -+config NET_DSA_RTL838X -+ tristate "Realtek rtl838x switch support" -+ depends on RTL838X -+ select NET_DSA_TAG_TRAILER -+ ---help--- -+ Say Y here if you want to use the Realtek rtl838x switch. -+ - config NET_DSA_SMSC_LAN9303 - tristate - select NET_DSA_TAG_LAN9303 ---- a/drivers/net/dsa/Makefile -+++ b/drivers/net/dsa/Makefile -@@ -11,6 +11,7 @@ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e - obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o - obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o - realtek-smi-objs := realtek-smi-core.o rtl8366.o rtl8366rb.o -+obj-$(CONFIG_NET_DSA_RTL838X) += rtl838x_sw.o rtl838x_phy.o - obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o - obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o - obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o -- 2.30.2