From 2b2f14c959ad883e3859d957f5f8571e9c2ef547 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Tue, 25 Oct 2022 09:12:16 +0200 Subject: [PATCH] ipq40xx: utilize nvmem-cells for openmesh,a42 The calibration data and mac addresses on this device are stored in the 0:ART partition. It is therefore possible to move the code to handle them directly to the devicetree instead of the various scripts. But the actual relevant information about the partition layout is provided by the bootloader via bootargs (mtdparts) and not via the devicetree itself. Instead of using a fixed-partition template, the mtd dynamic partitions support from the upstream kernel is used. Reported-by: Robert Marko Reviewed-by: Robert Marko Signed-off-by: Sven Eckelmann --- .../ipq40xx/base-files/etc/board.d/02_network | 1 - .../etc/hotplug.d/firmware/11-ath10k-caldata | 2 - .../lib/preinit/05_set_iface_mac_ipq40xx.sh | 1 - .../arch/arm/boot/dts/qcom-ipq4018-a42.dts | 38 +++++++++++++++++++ 4 files changed, 38 insertions(+), 4 deletions(-) diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index b98c85decfb..46e6a3f9bdc 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -163,7 +163,6 @@ ipq40xx_setup_macs() pakedge,wr-1) wan_mac=$(macaddr_add $(get_mac_label) 1) ;; - openmesh,a42|\ openmesh,a62) label_mac="$(mtd_get_mac_binary "0:ART" 0x0)" ;; diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 5d075509b57..559aacea1eb 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -77,7 +77,6 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; cellc,rtl30vw |\ - openmesh,a42 |\ openmesh,a62 |\ plasmacloud,pa1200 |\ plasmacloud,pa2200) @@ -174,7 +173,6 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; cellc,rtl30vw |\ - openmesh,a42 |\ openmesh,a62 |\ plasmacloud,pa1200 |\ plasmacloud,pa2200) diff --git a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh index 0d19c6bae0e..81d22686a3d 100644 --- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh +++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh @@ -29,7 +29,6 @@ preinit_set_mac_address() { ip link set dev lan1 address $(macaddr_add "$base_mac" 1) ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7) ;; - openmesh,a42|\ openmesh,a62) ip link set dev ethernet1 address $(mtd_get_mac_binary "0:ART" 0x0) ip link set dev ethernet2 address $(mtd_get_mac_binary "0:ART" 0x6) diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts index 89f5183045d..b6ff09a0420 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts @@ -71,6 +71,7 @@ led-failsafe = &led_status_green; led-running = &led_status_green; led-upgrade = &led_status_green; + label-mac-device = &swport5; }; leds { @@ -144,7 +145,32 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <24000000>; + /* partitions are passed via bootloader */ + partitions { + partition-art { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + label = "0:ART"; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; + + macaddr_gmac0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_gmac1: macaddr@6 { + reg = <0x6 0x6>; + }; + }; + }; }; }; @@ -177,19 +203,31 @@ &swport4 { status = "okay"; label = "ethernet2"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_gmac1>; }; &swport5 { status = "okay"; label = "ethernet1"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_gmac0>; }; &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "OM-A42"; + + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_1000>; }; &wifi1 { status = "okay"; qcom,ath10k-calibration-variant = "OM-A42"; + + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_5000>; }; -- 2.30.2