From 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve Date: Tue, 8 Jul 2008 11:02:05 -0400 Subject: [PATCH] ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS) ARM: Fix for incorrect version of patch applied when adding support for the Lyrtech SFF-SDR board. Signed-off-by: Hugo Villeneuve Signed-off-by: Philip Balister, OpenSDR --- CREDITS | 5 + board/davinci/sffsdr/Makefile | 2 +- board/davinci/sffsdr/config.mk | 11 +- board/davinci/sffsdr/dv_board.c | 212 --------------------- board/davinci/sffsdr/sffsdr.c | 310 +++++++++++++++++++++++++++++++ include/configs/davinci_sffsdr.h | 69 +++---- 6 files changed, 342 insertions(+), 267 deletions(-) delete mode 100644 board/davinci/sffsdr/dv_board.c create mode 100644 board/davinci/sffsdr/sffsdr.c diff --git a/CREDITS b/CREDITS index aa57682751..3b6e57dee1 100644 --- a/CREDITS +++ b/CREDITS @@ -537,3 +537,8 @@ N: Timo Tuunainen E: timo.tuunainen@sysart.fi D: Support for Artila M-501 starter kit W: http://www.sysart.fi/ + +N: Philip Balister +E: philip@opensdr.com +D: Port to Lyrtech SFFSDR development board. +W: www.opensdr.com diff --git a/board/davinci/sffsdr/Makefile b/board/davinci/sffsdr/Makefile index 579efe2623..fb31ee42b2 100644 --- a/board/davinci/sffsdr/Makefile +++ b/board/davinci/sffsdr/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := dv_board.o +COBJS := $(BOARD).o SOBJS := board_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/davinci/sffsdr/config.mk b/board/davinci/sffsdr/config.mk index e8a329cf56..f3b23d1c83 100644 --- a/board/davinci/sffsdr/config.mk +++ b/board/davinci/sffsdr/config.mk @@ -3,8 +3,10 @@ # Gary Jennejohn, DENX Software Engineering, # David Mueller, ELSOFT AG, # +# Copyright (C) 2008 Lyrtech +# Copyright (C) 2008 Philip Balister, OpenSDR +# # Lyrtech SFF SDR board (ARM926EJS) cpu -# see http://www.lyrtech.com/ for more information on Lyrtech # # SFF SDR board has 1 bank of 128 MB DDR RAM # Physical Address: @@ -16,9 +18,6 @@ # Integrity kernel is expected to be at 8000'0000, entry 8000'00D0, # up to 81FF'FFFF (uses up to 32 MB of memory for text, heap, etc). # -# we load ourself to 8400'0000 -# -# - -# Provide at least 32MB spacing between us and the Integrity kernel image +# we load ourself to 8400'0000 to provide at least 32MB spacing +# between us and the Integrity kernel image TEXT_BASE = 0x84000000 diff --git a/board/davinci/sffsdr/dv_board.c b/board/davinci/sffsdr/dv_board.c deleted file mode 100644 index 0771b5b6ee..0000000000 --- a/board/davinci/sffsdr/dv_board.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * ---------------------------------------------------------------------------- - */ - -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -extern void timer_init(void); -extern int eth_hw_init(void); -extern phy_t phy; - - -/* Works on Always On power domain only (no PD argument) */ -void lpsc_on(unsigned int id) -{ - dv_reg_p mdstat, mdctl; - - if (id >= DAVINCI_LPSC_GEM) - return; /* Don't work on DSP Power Domain */ - - mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); - mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); - - while (REG(PSC_PTSTAT) & 0x01); - - if ((*mdstat & 0x1f) == 0x03) - return; /* Already on and enabled */ - - *mdctl |= 0x03; - - /* Special treatment for some modules as for sprue14 p.7.4.2 */ - if ((id == DAVINCI_LPSC_VPSSSLV) || - (id == DAVINCI_LPSC_EMAC) || - (id == DAVINCI_LPSC_EMAC_WRAPPER) || - (id == DAVINCI_LPSC_MDIO) || - (id == DAVINCI_LPSC_USB) || - (id == DAVINCI_LPSC_ATA) || - (id == DAVINCI_LPSC_VLYNQ) || - (id == DAVINCI_LPSC_UHPI) || - (id == DAVINCI_LPSC_DDR_EMIF) || - (id == DAVINCI_LPSC_AEMIF) || - (id == DAVINCI_LPSC_MMC_SD) || - (id == DAVINCI_LPSC_MEMSTICK) || - (id == DAVINCI_LPSC_McBSP) || - (id == DAVINCI_LPSC_GPIO)) - * mdctl |= 0x200; - - REG(PSC_PTCMD) = 0x01; - - while (REG(PSC_PTSTAT) & 0x03); - while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */ -} - -void dsp_on(void) -{ - int i; - - if (REG(PSC_PDSTAT1) & 0x1f) - return; /* Already on */ - - REG(PSC_GBLCTL) |= 0x01; - REG(PSC_PDCTL1) |= 0x01; - REG(PSC_PDCTL1) &= ~0x100; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; - REG(PSC_PTCMD) = 0x02; - - for (i = 0; i < 100; i++) { - if (REG(PSC_EPCPR) & 0x02) - break; - } - - REG(PSC_CHP_SHRTSW) = 0x01; - REG(PSC_PDCTL1) |= 0x100; - REG(PSC_EPCCR) = 0x02; - - for (i = 0; i < 100; i++) { - if (!(REG(PSC_PTSTAT) & 0x02)) - break; - } - - REG(PSC_GBLCTL) &= ~0x1f; -} - - -int board_init(void) -{ - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_SFFSDR; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* Workaround for TMS320DM6446 errata 1.3.22 */ - REG(PSC_SILVER_BULLET) = 0; - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_EMAC); - lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); - lpsc_on(DAVINCI_LPSC_MDIO); - lpsc_on(DAVINCI_LPSC_I2C); - lpsc_on(DAVINCI_LPSC_UART0); - lpsc_on(DAVINCI_LPSC_TIMER1); - lpsc_on(DAVINCI_LPSC_GPIO); - - /* Powerup the DSP */ - dsp_on(); - - /* Bringup UART0 out of reset */ - REG(UART0_PWREMU_MGMT) = 0x0000e003; - - /* Enable GIO3.3V cells used for EMAC */ - REG(VDD3P3V_PWDN) = 0; - - /* Enable UART0 MUX lines */ - REG(PINMUX1) |= 1; - - /* Enable EMAC and AEMIF pins */ - REG(PINMUX0) = 0x80000c1f; - - /* Enable I2C pin Mux */ - REG(PINMUX1) |= (1 << 7); - - /* Set the Bus Priority Register to appropriate value */ - REG(VBPR) = 0x20; - - timer_init(); - - return(0); -} - -int misc_init_r(void) -{ - u_int8_t tmp[20], buf[10]; - int i = 0; - int clk = 0; - - clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1); - - printf("ARM Clock: %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27) / 2); - printf("DDR Clock: %dMHz\n", (clk / 2)); - - /* Configure I2C switch (PCA9543) to enable channel 0. */ - tmp[0] = CFG_I2C_PCA9543_ENABLE_CH0; - if (i2c_write(CFG_I2C_PCA9543_ADDR, 0, - CFG_I2C_PCA9543_ADDR_LEN, tmp, 1)) - printf("Write to MUX @ 0x%02x failed\n", CFG_I2C_PCA9543_ADDR); - - /* Set Ethernet MAC address from EEPROM. - * We must read 8 bytes because data is stored in little-endian. */ - if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x05A8, - CFG_I2C_EEPROM_ADDR_LEN, buf, 8)) { - printf("Read from EEPROM @ 0x%02x failed\n", - CFG_I2C_EEPROM_ADDR); - } else { - tmp[0] = 0xff; - for (i = 0; i < 6; i++) - tmp[0] &= buf[i]; - - if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) { - sprintf((char *)&tmp[0], - "%02x:%02x:%02x:%02x:%02x:%02x", - buf[3], buf[2], buf[1], buf[0], - buf[7], buf[6]); - setenv("ethaddr", (char *)&tmp[0]); - } - } - - if (!eth_hw_init()) { - printf("Ethernet init failed\n"); - } else { - printf("ETH PHY: %s\n", phy.name); - } - - return(0); -} - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return(0); -} diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c new file mode 100644 index 0000000000..b73484ae2b --- /dev/null +++ b/board/davinci/sffsdr/sffsdr.c @@ -0,0 +1,310 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * Copyright (C) 2008 Lyrtech + * Copyright (C) 2008 Philip Balister, OpenSDR + * + * Parts are shamelessly stolen from various TI sources, original copyright + * follows: + * + * Copyright (C) 2004 Texas Instruments. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */ +#define DAVINCI_A3CR_VAL (0x3FFFFFFD) /* EMIF-A CS3 value for FPGA. */ + +#define INTEGRITY_SYSCFG_OFFSET 0x7E8 +#define INTEGRITY_CHECKWORD_OFFSET 0x7F8 +#define INTEGRITY_CHECKWORD_VALUE 0x10ADBEEF + +DECLARE_GLOBAL_DATA_PTR; + +extern void timer_init(void); +extern int eth_hw_init(void); +extern phy_t phy; + + +/* Works on Always On power domain only (no PD argument) */ +void lpsc_on(unsigned int id) +{ + dv_reg_p mdstat, mdctl; + + if (id >= DAVINCI_LPSC_GEM) + return; /* Don't work on DSP Power Domain */ + + mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); + mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); + + while (REG(PSC_PTSTAT) & 0x01); + + if ((*mdstat & 0x1f) == 0x03) + return; /* Already on and enabled */ + + *mdctl |= 0x03; + + /* Special treatment for some modules as for sprue14 p.7.4.2 */ + switch (id) { + case DAVINCI_LPSC_VPSSSLV: + case DAVINCI_LPSC_EMAC: + case DAVINCI_LPSC_EMAC_WRAPPER: + case DAVINCI_LPSC_MDIO: + case DAVINCI_LPSC_USB: + case DAVINCI_LPSC_ATA: + case DAVINCI_LPSC_VLYNQ: + case DAVINCI_LPSC_UHPI: + case DAVINCI_LPSC_DDR_EMIF: + case DAVINCI_LPSC_AEMIF: + case DAVINCI_LPSC_MMC_SD: + case DAVINCI_LPSC_MEMSTICK: + case DAVINCI_LPSC_McBSP: + case DAVINCI_LPSC_GPIO: + *mdctl |= 0x200; + break; + } + + REG(PSC_PTCMD) = 0x01; + + while (REG(PSC_PTSTAT) & 0x03); + while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */ +} + +#if !defined(CFG_USE_DSPLINK) +void dsp_on(void) +{ + int i; + + if (REG(PSC_PDSTAT1) & 0x1f) + return; /* Already on */ + + REG(PSC_GBLCTL) |= 0x01; + REG(PSC_PDCTL1) |= 0x01; + REG(PSC_PDCTL1) &= ~0x100; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; + REG(PSC_PTCMD) = 0x02; + + for (i = 0; i < 100; i++) { + if (REG(PSC_EPCPR) & 0x02) + break; + } + + REG(PSC_CHP_SHRTSW) = 0x01; + REG(PSC_PDCTL1) |= 0x100; + REG(PSC_EPCCR) = 0x02; + + for (i = 0; i < 100; i++) { + if (!(REG(PSC_PTSTAT) & 0x02)) + break; + } + + REG(PSC_GBLCTL) &= ~0x1f; +} +#endif /* CFG_USE_DSPLINK */ + +int board_init(void) +{ + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_SFFSDR; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + /* Workaround for TMS320DM6446 errata 1.3.22 */ + REG(PSC_SILVER_BULLET) = 0; + + /* Power on required peripherals */ + lpsc_on(DAVINCI_LPSC_EMAC); + lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); + lpsc_on(DAVINCI_LPSC_MDIO); + lpsc_on(DAVINCI_LPSC_I2C); + lpsc_on(DAVINCI_LPSC_UART0); + lpsc_on(DAVINCI_LPSC_TIMER1); + lpsc_on(DAVINCI_LPSC_GPIO); + +#if !defined(CFG_USE_DSPLINK) + /* Powerup the DSP */ + dsp_on(); +#endif /* CFG_USE_DSPLINK */ + + /* Bringup UART0 out of reset */ + REG(UART0_PWREMU_MGMT) = 0x0000e003; + + /* Enable GIO3.3V cells used for EMAC */ + REG(VDD3P3V_PWDN) = 0; + + /* Enable UART0 MUX lines */ + REG(PINMUX1) |= 1; + + /* Enable EMAC and AEMIF pins */ + REG(PINMUX0) = 0x80000c1f; + + /* Enable I2C pin Mux */ + REG(PINMUX1) |= (1 << 7); + + /* Set the Bus Priority Register to appropriate value */ + REG(VBPR) = 0x20; + + timer_init(); + + return(0); +} + +/* Read ethernet MAC address from Integrity data structure inside EEPROM. */ +int read_mac_address(uint8_t *buf) +{ + u_int32_t value, mac[2], address; + + /* Read Integrity data structure checkword. */ + if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET, + CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) + goto err; + if (value != INTEGRITY_CHECKWORD_VALUE) + return 1; + + /* Read SYSCFG structure offset. */ + if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET, + CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) + goto err; + address = 0x800 + (int) value; /* Address of SYSCFG structure. */ + + /* Read NET CONFIG structure offset. */ + if (i2c_read(CFG_I2C_EEPROM_ADDR, address, + CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) + goto err; + address = 0x800 + (int) value; /* Address of NET CONFIG structure. */ + address += 12; /* Address of NET INTERFACE CONFIG structure. */ + + /* Read NET INTERFACE CONFIG 2 structure offset. */ + if (i2c_read(CFG_I2C_EEPROM_ADDR, address, + CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) + goto err; + address = 0x800 + 16 + (int) value; /* Address of NET INTERFACE + * CONFIG 2 structure. */ + + /* Read MAC address. */ + if (i2c_read(CFG_I2C_EEPROM_ADDR, address, + CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8)) + goto err; + + buf[0] = mac[0] >> 24; + buf[1] = mac[0] >> 16; + buf[2] = mac[0] >> 8; + buf[3] = mac[0]; + buf[4] = mac[1] >> 24; + buf[5] = mac[1] >> 16; + + return 0; + +err: + printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR); + return 1; +} + +/* Platform dependent initialisation. */ +int misc_init_r(void) +{ + int i; + u_int8_t i2cbuf; + u_int8_t env_enetaddr[6], eeprom_enetaddr[6]; + char *tmp = getenv("ethaddr"); + char *end; + int clk; + + /* EMIF-A CS3 configuration for FPGA. */ + REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL; + + clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1); + + printf("ARM Clock: %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27) / 2); + printf("DDR Clock: %dMHz\n", (clk / 2)); + + /* Configure I2C switch (PCA9543) to enable channel 0. */ + i2cbuf = CFG_I2C_PCA9543_ENABLE_CH0; + if (i2c_write(CFG_I2C_PCA9543_ADDR, 0, + CFG_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) { + printf("Write to MUX @ 0x%02x failed\n", CFG_I2C_PCA9543_ADDR); + return 1; + } + + /* Read Ethernet MAC address from the U-Boot environment. */ + for (i = 0; i < 6; i++) { + env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; + if (tmp) + tmp = (*end) ? end+1 : end; + } + + /* Read Ethernet MAC address from EEPROM. */ + if (read_mac_address(eeprom_enetaddr) == 0) { + if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 && + memcmp(env_enetaddr, eeprom_enetaddr, 6) != 0) { + printf("\nWarning: MAC addresses don't match:\n"); + printf("\tHW MAC address: " + "%02X:%02X:%02X:%02X:%02X:%02X\n", + eeprom_enetaddr[0], eeprom_enetaddr[1], + eeprom_enetaddr[2], eeprom_enetaddr[3], + eeprom_enetaddr[4], eeprom_enetaddr[5]); + printf("\t\"ethaddr\" value: " + "%02X:%02X:%02X:%02X:%02X:%02X\n", + env_enetaddr[0], env_enetaddr[1], + env_enetaddr[2], env_enetaddr[3], + env_enetaddr[4], env_enetaddr[5]) ; + debug("### Set MAC addr from environment\n"); + memcpy(eeprom_enetaddr, env_enetaddr, 6); + } + if (!tmp) { + char ethaddr[20]; + + sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", + eeprom_enetaddr[0], eeprom_enetaddr[1], + eeprom_enetaddr[2], eeprom_enetaddr[3], + eeprom_enetaddr[4], eeprom_enetaddr[5]) ; + debug("### Set environment from HW MAC addr = \"%s\"\n", + ethaddr); + setenv("ethaddr", ethaddr); + } + } + + if (!eth_hw_init()) { + printf("Ethernet init failed\n"); + } else { + printf("ETH PHY: %s\n", phy.name); + } + + /* On this platform, U-Boot is copied in RAM by the UBL, + * so we are always in the relocated state. */ + gd->flags |= GD_FLG_RELOC; + + return(0); +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return(0); +} diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 41a6763e8f..0e49e6c159 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -1,6 +1,9 @@ /* * Copyright (C) 2007 Sergey Kubushyn * + * Copyright (C) 2008 Lyrtech + * Copyright (C) 2008 Philip Balister, OpenSDR + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of @@ -21,30 +24,24 @@ #define __CONFIG_H #include -/*=======*/ /* Board */ -/*=======*/ #define SFFSDR #define CFG_NAND_LARGEPAGE #define CFG_USE_NAND -/*===================*/ +#define CFG_USE_DSPLINK /* This is to prevent U-Boot from + * powering ON the DSP. */ /* SoC Configuration */ -/*===================*/ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ #define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ #define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CFG_HZ 1000 -/*==================================================*/ -/* EEPROM definitions for Atmel 24LC64 EEPROM chip */ -/*==================================================*/ +/* EEPROM definitions for Atmel 24LC64 EEPROM chip */ #define CFG_I2C_EEPROM_ADDR_LEN 2 #define CFG_I2C_EEPROM_ADDR 0x50 #define CFG_EEPROM_PAGE_WRITE_BITS 5 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -/*=============*/ /* Memory Info */ -/*=============*/ #define CFG_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ #define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ #define CFG_MEMTEST_START 0x80000000 /* memtest start address */ @@ -54,9 +51,7 @@ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ #define DDR_4BANKS /* 4-bank DDR2 (128MB) */ -/*====================*/ /* Serial Driver info */ -/*====================*/ #define CFG_NS16550 #define CFG_NS16550_SERIAL #define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ @@ -65,16 +60,12 @@ #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/*===================*/ /* I2C Configuration */ -/*===================*/ #define CONFIG_HARD_I2C #define CONFIG_DRIVER_DAVINCI_I2C #define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ #define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ /* Network & Ethernet Configuration */ -/*==================================*/ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII #define CONFIG_BOOTP_DEFAULT @@ -83,9 +74,7 @@ #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10 #define CONFIG_OVERWRITE_ETHADDR_ONCE -/*=====================*/ /* Flash & Environment */ -/*=====================*/ #undef CFG_ENV_IS_IN_FLASH #define CFG_NO_FLASH #define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ @@ -98,28 +87,19 @@ #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define NAND_MAX_CHIPS 1 #define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -/*=====================*/ -/* Board related stuff */ -/*=====================*/ -/*==========================================*/ -/* I2C switch definitions for PCA9543 chip */ -/* on Lyrtech SFF SDR board. */ -/* This chip has a single register. */ -/*==========================================*/ +/* I2C switch definitions for PCA9543 chip */ #define CFG_I2C_PCA9543_ADDR 0x70 -#define CFG_I2C_PCA9543_ADDR_LEN 0 +#define CFG_I2C_PCA9543_ADDR_LEN 0 /* Single register. */ #define CFG_I2C_PCA9543_ENABLE_CH0 0x01 /* Enable channel 0. */ -/*==============================*/ /* U-Boot general configuration */ -/*==============================*/ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds. */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -/* Print buffer size */ -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_PBSIZE \ + (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print buffer size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x80700000 /* Default Linux kernel @@ -133,25 +113,20 @@ #define CFG_LONGHELP #define CONFIG_CRC32_VERIFY #define CONFIG_MX_CYCLIC -/* - * Define this to load an Integrity kernel. - * -#define CONFIG_CMD_ELF - */ - -/*===================*/ /* Linux Information */ -/*===================*/ #define LINUX_BOOT_PARAM_ADDR 0x80000100 #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS \ - "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot" - -/*=================*/ +#define CONFIG_BOOTARGS \ + "mem=56M " \ + "console=ttyS0,115200n8 " \ + "root=/dev/nfs rw noinitrd ip=dhcp " \ + "nfsroot=${serverip}:/nfsroot/sffsdr " \ + "eth0=${ethaddr}" +#define CONFIG_BOOTCOMMAND \ + "nand read 87A00000 100000 300000;" \ + "bootelf 87A00000" /* U-Boot commands */ -/*=================*/ #include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP @@ -167,9 +142,7 @@ #undef CONFIG_CMD_SETGETDCR #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_IMLS -/*=======================*/ /* KGDB support (if any) */ -/*=======================*/ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -- 2.30.2