From 2a309f33def4a8f72cb3b2e6f6a93ad487a50189 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 9 Apr 2013 16:41:31 -0500 Subject: [PATCH] omap5912-osk: Fix device initialisation In the current u-boot, the device pin multiplexing and clock initialisation needs to be early during the boot process and before board_init() is called. U-boot is currently crashing on this board because this is not being done early enough. Therefore, add a s_init() function for the omap5912-osk board to do this. Also fix the stack pointer so that it is pointing to the end of the internal RAM and not the beginning as this was also causing the device to crash. Signed-off-by: Jon Hunter --- board/ti/omap5912osk/lowlevel_init.S | 20 ++++++++++++++++++++ board/ti/omap5912osk/omap5912osk.c | 12 ++++++++---- include/configs/omap5912osk.h | 7 +++++-- 3 files changed, 33 insertions(+), 6 deletions(-) diff --git a/board/ti/omap5912osk/lowlevel_init.S b/board/ti/omap5912osk/lowlevel_init.S index e60161ebaf..ca7361e05a 100644 --- a/board/ti/omap5912osk/lowlevel_init.S +++ b/board/ti/omap5912osk/lowlevel_init.S @@ -306,6 +306,23 @@ common_tc: ldr r1, VAL_MPU_CNTL_TIMER str r1, [r0] + /* + * Setup a temporary stack + */ + ldr sp, SRAM_STACK + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + + /* + * Save the old lr(passed in ip) and the current lr to stack + */ + push {ip, lr} + + /* + * go setup pll, mux, memory + */ + bl s_init + pop {ip, pc} + /* back to arch calling code */ mov pc, lr @@ -470,6 +487,9 @@ VAL_ARM_IDLECT2: VAL_ARM_IDLECT3: .word 0x00000015 +SRAM_STACK: + .word CONFIG_SYS_INIT_SP_ADDR + /* command values */ .equ CMD_SDRAM_NOP, 0x00000000 .equ CMD_SDRAM_PRECHARGE, 0x00000001 diff --git a/board/ti/omap5912osk/omap5912osk.c b/board/ti/omap5912osk/omap5912osk.c index 9e91c5efc1..95140719aa 100644 --- a/board/ti/omap5912osk/omap5912osk.c +++ b/board/ti/omap5912osk/omap5912osk.c @@ -66,6 +66,14 @@ int board_init (void) /* adress of boot parameters */ gd->bd->bi_boot_params = 0x10000100; + flash__init(); + ether__init(); + + return 0; +} + +void s_init(void) +{ /* Configure MUX settings */ set_muxconf_regs (); peripheral_power_enable (); @@ -75,10 +83,6 @@ int board_init (void) * ... rkw ... */ icache_enable (); - - flash__init (); - ether__init (); - return 0; } /****************************** diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index 40ca9bb98d..558e933b0a 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -183,7 +183,10 @@ #define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ #define CONFIG_ENV_OFFSET 0x20000 /* environment starts here */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR PHYS_SRAM +#define CONFIG_SYS_INIT_RAM_SIZE (250 * 1024) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE) #endif /* __CONFIG_H */ -- 2.30.2