From 29d1d52b06fbf4b26b592310bff7c4fe3ffaca07 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 25 Feb 2018 14:08:14 +0100 Subject: [PATCH] ARM: dts: Set D-Link DNS-313 SATA to muxmode 0 This stops the driver from trying to probe the ATA slave interface. The vendor code enables the slave interface but the driver in the vendor tree does not make use of it. Setting it to muxmode 0 disables the slave interface: the hardware only has the master interface connected to the one harddrive slot anyways. Without this change booting takes excessive time, so it is very annoying to end users. Fixes: dd5c0561db75 ("ARM: dts: Add basic devicetree for D-Link DNS-313") Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts index 08568ce24d06..da8bb9d60f99 100644 --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts @@ -269,7 +269,7 @@ sata: sata@46000000 { /* The ROM uses this muxmode */ - cortina,gemini-ata-muxmode = <3>; + cortina,gemini-ata-muxmode = <0>; cortina,gemini-enable-sata-bridge; status = "okay"; }; -- 2.30.2