From 2983f296f2327bc517e3b29344fce82271160197 Mon Sep 17 00:00:00 2001 From: Shyam Sundar S K Date: Thu, 8 Dec 2016 17:31:14 +0530 Subject: [PATCH] pinctrl/amd: Set the level based on ACPI tables In the function amd_gpio_irq_set_type, read the values from the ACPI table to set the level and drop the settings passed by the client. Cc: # 4.8.x+ Reviewed-by: Pankaj Sen Reviewed-by: Nitesh Kumar Agrawal Reviewed-by: Shah, Nehal-bakulchandra Signed-off-by: Shyam-sundar S-k Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index aea310a91821..c9a146948192 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -382,26 +382,21 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type) { int ret = 0; u32 pin_reg; - unsigned long flags; - bool level_trig; - u32 active_level; + unsigned long flags, irq_flags; struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct amd_gpio *gpio_dev = gpiochip_get_data(gc); spin_lock_irqsave(&gpio_dev->lock, flags); pin_reg = readl(gpio_dev->base + (d->hwirq)*4); - /* - * When level_trig is set EDGE and active_level is set HIGH in BIOS - * default settings, ignore incoming settings from client and use - * BIOS settings to configure GPIO register. + /* Ignore the settings coming from the client and + * read the values from the ACPI tables + * while setting the trigger type */ - level_trig = !(pin_reg & (LEVEL_TRIGGER << LEVEL_TRIG_OFF)); - active_level = pin_reg & (ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF); - if(level_trig && - ((active_level >> ACTIVE_LEVEL_OFF) == ACTIVE_HIGH)) - type = IRQ_TYPE_EDGE_FALLING; + irq_flags = irq_get_trigger_type(d->irq); + if (irq_flags != IRQ_TYPE_NONE) + type = irq_flags; switch (type & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_EDGE_RISING: -- 2.30.2