From 28be5f15df2ee6882b0a122693159c96a28203c7 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 1 Oct 2018 22:43:46 +0200 Subject: [PATCH] regulator: fixed: Default enable high on DT regulators commit efdfeb079cc3 ("regulator: fixed: Convert to use GPIO descriptor only") switched to use gpiod_get() to look up the regulator from the gpiolib core whether that is device tree or boardfile. This meant that we activate the code in a603a2b8d86e ("gpio: of: Add special quirk to parse regulator flags") which means the descriptors coming from the device tree already have the right inversion and open drain semantics set up from the gpiolib core. As the fixed regulator was inspected again we got the inverted inversion and things broke. Fix it by ignoring the config in the device tree for now: the later patches in the series will push all inversion handling over to the gpiolib core and set it up properly in the boardfiles for legacy devices, but I did not finish that for this kernel cycle. Fixes: commit efdfeb079cc3 ("regulator: fixed: Convert to use GPIO descriptor only") Reported-by: Leonard Crestez Reported-by: Fabio Estevam Reported-by: John Stultz Reported-by: Anders Roxell Signed-off-by: Linus Walleij Tested-by: John Stultz Signed-off-by: Mark Brown --- drivers/regulator/fixed.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index 1142f195529b..7d639ad953b6 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -79,9 +79,14 @@ of_get_fixed_voltage_config(struct device *dev, of_property_read_u32(np, "startup-delay-us", &config->startup_delay); - config->enable_high = of_property_read_bool(np, "enable-active-high"); - config->gpio_is_open_drain = of_property_read_bool(np, - "gpio-open-drain"); + /* + * FIXME: we pulled active low/high and open drain handling into + * gpiolib so it will be handled there. Delete this in the second + * step when we also remove the custom inversion handling for all + * legacy boardfiles. + */ + config->enable_high = 1; + config->gpio_is_open_drain = 0; if (of_find_property(np, "vin-supply", NULL)) config->input_supply = "vin"; -- 2.30.2