From 26fda610f3c5217600e87904d1ba9236091c1b7c Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Tue, 10 Mar 2020 19:31:20 +0100 Subject: [PATCH] ath79: use rgmii-id instead of rgmii in ubnt,lap-120 Since commit 6f2e1b7485 (ath79: disable delays on AT803X config init) the incoming incoming traffic on the ubnt,lap-120 devices Ethernet port was not making it through. Using rgmii-id instead of rgmii (same configuration as ubnt,litebeam-ac-gen2) fixes it. Fixes FS#2893. Signed-off-by: Roger Pueyo Centelles --- target/linux/ath79/dts/ar9342_ubnt_lap-120.dts | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/target/linux/ath79/dts/ar9342_ubnt_lap-120.dts b/target/linux/ath79/dts/ar9342_ubnt_lap-120.dts index 9ea6079264..78567622b6 100644 --- a/target/linux/ath79/dts/ar9342_ubnt_lap-120.dts +++ b/target/linux/ath79/dts/ar9342_ubnt_lap-120.dts @@ -13,7 +13,6 @@ phy-mask = <4>; phy4: ethernet-phy@4 { - phy-mode = "rgmii"; reg = <4>; }; }; @@ -22,11 +21,11 @@ status = "okay"; /* default for ar934x, except for 1000M and 10M */ - pll-data = <0x06000000 0x00000101 0x00001313>; + pll-data = <0x02000000 0x00000101 0x00001313>; mtd-mac-address = <&art 0x0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&phy4>; gmac-config { -- 2.30.2