From 26fd33b9be0ccfbefcfe89fe1632bbff0fc901c6 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 28 Apr 2011 13:41:20 -0500 Subject: [PATCH] powerpc/86xx: display boot device and bank on the MPC8610 HPCD Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- board/freescale/mpc8610hpcd/mpc8610hpcd.c | 25 +++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index d7dd470c3f..4e4b7c096f 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -94,11 +94,32 @@ int checkboard(void) volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm; u8 *pixis_base = (u8 *)PIXIS_BASE; - printf ("Board: MPC8610HPCD, System ID: 0x%02x, " - "System Version: 0x%02x, FPGA Version: 0x%02x\n", + printf ("Board: MPC8610HPCD, Sys ID: 0x%02x, " + "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER), in_8(pixis_base + PIXIS_PVER)); + /* + * The MPC8610 HPCD workbook says that LBMAP=11 is the "normal" boot + * bank and LBMAP=00 is the alternate bank. However, the pixis + * altbank code can only set bits, not clear them, so we treat 00 as + * the normal bank and 11 as the alternate. + */ + switch (in_8(pixis_base + PIXIS_VBOOT) & 0xC0) { + case 0: + puts("vBank: Standard\n"); + break; + case 0x40: + puts("Promjet\n"); + break; + case 0x80: + puts("NAND\n"); + break; + case 0xC0: + puts("vBank: Alternate\n"); + break; + } + mcm->abcr |= 0x00010000; /* 0 */ mcm->hpmr3 = 0x80000008; /* 4c */ mcm->hpmr0 = 0; -- 2.30.2