From 263b7fb557f797d9d4d1dcf93fb6bb2efc3f1d46 Mon Sep 17 00:00:00 2001 From: John Youn Date: Thu, 17 Dec 2015 11:16:58 -0800 Subject: [PATCH] usb: dwc2: Move reset into dwc2_get_hwparams() The reset is required to get reset values of the hardware parameters but the force mode is not. Move the base reset into dwc2_get_hwparams() and do the reset and force mode afterwards. Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/core.c | 8 ++++++++ drivers/usb/dwc2/platform.c | 10 +++------- 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index b700a47e026a..3b55635c878c 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -3120,6 +3120,9 @@ void dwc2_set_parameters(struct dwc2_hsotg *hsotg, /** * During device initialization, read various hardware configuration * registers and interpret the contents. + * + * This should be called during driver probe. It will perform a core + * soft reset in order to get the reset values of the parameters. */ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) { @@ -3128,6 +3131,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4; u32 hptxfsiz, grxfsiz, gnptxfsiz; u32 gusbcfg = 0; + int retval; /* * Attempt to ensure this device is really a DWC_otg Controller. @@ -3147,6 +3151,10 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf, hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid); + retval = dwc2_core_reset(hsotg); + if (retval) + return retval; + hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1); hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2); hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index f4366513acb6..bfa4a6a8a1f3 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -512,13 +512,7 @@ static int dwc2_driver_probe(struct platform_device *dev) if (retval) return retval; - /* - * Reset before dwc2_get_hwparams() then it could get power-on real - * reset value form registers. - */ - dwc2_core_reset_and_force_dr_mode(hsotg); - - /* Detect config values from hardware */ + /* Reset the controller and detect hardware config values */ retval = dwc2_get_hwparams(hsotg); if (retval) goto error; @@ -526,6 +520,8 @@ static int dwc2_driver_probe(struct platform_device *dev) /* Validate parameter values */ dwc2_set_parameters(hsotg, params); + dwc2_core_reset_and_force_dr_mode(hsotg); + if (hsotg->dr_mode != USB_DR_MODE_HOST) { retval = dwc2_gadget_init(hsotg, irq); if (retval) -- 2.30.2