From 251ecfe37914919422d74dd32fab15a86f65e879 Mon Sep 17 00:00:00 2001 From: Sebastian Schaper Date: Wed, 9 Sep 2020 20:42:53 +0200 Subject: [PATCH] ath79: add support for ZyXEL NWA1121-NI Specifications: * AR9342, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R, 2.4 GHz * 1x Gigabit Ethernet (AR8035), 802.3af PoE Installation: * OEM Web UI is at 192.168.1.2 login as `admin` with password `1234` * Flash factory-AABJ.bin The string `AABJ` needs to be present within the file name of the uploaded image to be accepted by the OEM Web-based updater, the factory image is named accordingly to save the user from the hassle of manual renaming. TFTP Recovery: * Open the case, connect to TTL UART port (this is the official method described by Zyxel, the reset button is useless during power-on) * Extract factory image (.tar.bz2), serve `vmlinux_mi124_f1e.lzma.uImage` and `mi124_f1e-jffs2` via tftp at 192.168.1.10 * Interrupt uboot countdown, execute commands `run lk` `run lf` to flash the kernel / filesystem accordingly MAC addresses as verified by OEM firmware: use address source LAN *:cc mib0 0x30 ('eth0mac'), art 0x1002 (label) 2g *:cd mib0 0x4b ('wifi0mac') Signed-off-by: Sebastian Schaper --- .../ath79/dts/ar9342_zyxel_nwa1121-ni.dts | 31 ++++ .../linux/ath79/dts/ar9342_zyxel_nwa11xx.dtsi | 166 ++++++++++++++++++ .../generic/base-files/etc/board.d/02_network | 3 +- target/linux/ath79/image/generic.mk | 31 +++- 4 files changed, 229 insertions(+), 2 deletions(-) create mode 100644 target/linux/ath79/dts/ar9342_zyxel_nwa1121-ni.dts create mode 100644 target/linux/ath79/dts/ar9342_zyxel_nwa11xx.dtsi diff --git a/target/linux/ath79/dts/ar9342_zyxel_nwa1121-ni.dts b/target/linux/ath79/dts/ar9342_zyxel_nwa1121-ni.dts new file mode 100644 index 0000000000..65dc8c0440 --- /dev/null +++ b/target/linux/ath79/dts/ar9342_zyxel_nwa1121-ni.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9342_zyxel_nwa11xx.dtsi" + +/ { + compatible = "zyxel,nwa1121-ni", "qca,ar9342"; + model = "Zyxel NWA1121-NI"; + + aliases { + label-mac-device = ð0; + led-boot = &led_status_green; + led-failsafe = &led_status_amber; + led-running = &led_status_green; + led-upgrade = &led_status_amber; + }; + + leds { + compatible = "gpio-leds"; + + led_status_green: status_green { + label = "green:status"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led_status_amber: status_amber { + label = "amber:status"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/ath79/dts/ar9342_zyxel_nwa11xx.dtsi b/target/linux/ath79/dts/ar9342_zyxel_nwa11xx.dtsi new file mode 100644 index 0000000000..7cc1bba3fc --- /dev/null +++ b/target/linux/ath79/dts/ar9342_zyxel_nwa11xx.dtsi @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9344.dtsi" + +#include +#include +#include + +/ { + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; + + virtual_flash { + compatible = "mtd-concat"; + + devices = <&fwconcat0 &fwconcat1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = ; + label = "firmware"; + reg = <0x0 0x0>; + }; + }; + }; +}; + +&ref { + clock-frequency = <40000000>; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + fwconcat0: partition@50000 { + label = "fwconcat0"; + reg = <0x050000 0x800000>; + }; + + partition@850000 { + label = "loader"; + reg = <0x850000 0x010000>; + read-only; + }; + + fwconcat1: partition@860000 { + label = "fwconcat1"; + reg = <0x860000 0x740000>; + }; + + partition@fa0000 { + label = "config"; + reg = <0xfa0000 0x040000>; + read-only; + }; + + partition@fe0000 { + label = "mib0"; + reg = <0xfe0000 0x010000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_mib0_4b: macaddr@4b { + reg = <0x4b 0x11>; + }; + + macaddr_mib0_66: macaddr@66 { + reg = <0x66 0x11>; + }; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + calibration_ath9k: calibration@1000 { + reg = <0x1000 0x440>; + }; + + macaddr_art_1002: macaddr@1002 { + reg = <0x1002 0x6>; + }; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x06000000 0x00000101 0x00001313>; + + nvmem-cells = <&macaddr_art_1002>; + nvmem-cell-names = "mac-address"; + + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + + gmac-config { + device = <&gmac>; + rxdv-delay = <3>; + rxd-delay = <3>; + txen-delay = <3>; + txd-delay = <3>; + rgmii-gmac0 = <1>; + }; +}; + +&wmac { + status = "okay"; + + ieee80211-freq-limit = <2402000 2482000>; + + nvmem-cells = <&macaddr_mib0_4b>, <&calibration_ath9k>; + nvmem-cell-names = "mac-address-ascii", "calibration"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index f10737f2fb..34f04b5300 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -109,7 +109,8 @@ ath79_setup_interfaces() ubnt,unifiac-mesh|\ ubnt,unifi|\ wd,mynet-wifi-rangeextender|\ - winchannel,wb2000) + winchannel,wb2000|\ + zyxel,nwa1121-ni) ucidef_set_interface_lan "eth0" ;; airtight,c-75) diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 4aa6ed6480..9ba5e20e57 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -9,7 +9,7 @@ DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK DEVICE_VARS += KERNEL_INITRAMFS_PREFIX DAP_SIGNATURE DEVICE_VARS += EDIMAX_HEADER_MAGIC EDIMAX_HEADER_MODEL -DEVICE_VARS += OPENMESH_CE_TYPE +DEVICE_VARS += OPENMESH_CE_TYPE ZYXEL_MODEL_STRING define Build/add-elecom-factory-initramfs $(eval edimax_model=$(word 1,$(1))) @@ -161,6 +161,13 @@ define Build/wrgg-pad-rootfs $(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@ endef +define Build/zyxel-tar-bz2 + mkdir -p $@.tmp + mv $@ $@.tmp/$(word 2,$(1)) + cp $(KDIR)/loader-$(DEVICE_NAME).uImage $@.tmp/$(word 1,$(1)).lzma.uImage + $(TAR) -cjf $@ -C $@.tmp . + rm -rf $@.tmp +endef define Device/seama KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma @@ -2687,6 +2694,28 @@ define Device/zbtlink_zbt-wd323 endef TARGET_DEVICES += zbtlink_zbt-wd323 +define Device/zyxel_nwa11xx + $(Device/loader-okli-uimage) + SOC := ar9342 + DEVICE_VENDOR := ZyXEL + LOADER_FLASH_OFFS := 0x050000 + KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 + IMAGE_SIZE := 8192k + IMAGES += factory-$$$$(ZYXEL_MODEL_STRING).bin + IMAGE/factory-$$$$(ZYXEL_MODEL_STRING).bin := \ + append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \ + pad-rootfs | pad-to 8192k | check-size | zyxel-tar-bz2 \ + vmlinux_mi124_f1e mi124_f1e-jffs2 | append-md5sum-bin +endef + +define Device/zyxel_nwa1121-ni + $(Device/zyxel_nwa11xx) + DEVICE_MODEL := NWA1121 + DEVICE_VARIANT := NI + ZYXEL_MODEL_STRING := AABJ +endef +TARGET_DEVICES += zyxel_nwa1121-ni + define Device/zyxel_nbg6616 SOC := qca9557 DEVICE_VENDOR := ZyXEL -- 2.30.2