From 24b6dbf7f1a750edf4ac2ec9e04e488a5d5687d3 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 31 Jan 2009 18:36:07 +0000 Subject: [PATCH] mac80211/ath9k: disable leds on the ar9100 devices SVN-Revision: 14330 --- ...1-ath9k-dont-register-leds-on-ar9100.patch | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch diff --git a/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch b/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch new file mode 100644 index 00000000000..85518a20387 --- /dev/null +++ b/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch @@ -0,0 +1,38 @@ +--- a/drivers/net/wireless/ath9k/main.c ++++ b/drivers/net/wireless/ath9k/main.c +@@ -989,6 +989,11 @@ static void ath_unregister_led(struct at + + static void ath_deinit_leds(struct ath_softc *sc) + { ++#if 0 ++ if (AR_SREV_9100(sc->sc_ah)) ++ return; ++#endif ++ + ath_unregister_led(&sc->assoc_led); + sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; + ath_unregister_led(&sc->tx_led); +@@ -1002,6 +1007,11 @@ static void ath_init_leds(struct ath_sof + char *trigger; + int ret; + ++#if 0 ++ if (AR_SREV_9100(sc->sc_ah)) ++ return; ++#endif ++ + /* Configure gpio 1 for output */ + ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); +--- a/drivers/net/wireless/ath9k/hw.c ++++ b/drivers/net/wireless/ath9k/hw.c +@@ -3527,6 +3527,9 @@ void ath9k_hw_cfg_output(struct ath_hal + + void ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio, u32 val) + { ++ if (AR_SREV_9100(ah)) ++ return; ++ + REG_RMW(ah, AR_GPIO_IN_OUT, ((val & 1) << gpio), + AR_GPIO_BIT(gpio)); + } -- 2.30.2