From 2332bd04199353b06bf35f14f972d518907f08e0 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Sat, 23 Dec 2017 12:53:52 +0800 Subject: [PATCH] cpufreq: imx6q: switch to Use clk_bulk_get() to refine clk operations Use clk_bulk_get() to simplify the driver's clocks handling. Acked-by: Viresh Kumar Signed-off-by: Dong Aisheng Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/imx6q-cpufreq.c | 125 ++++++++++++++------------------ 1 file changed, 56 insertions(+), 69 deletions(-) diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index d9b2c2de49c4..8bfb0775662b 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -25,15 +25,29 @@ static struct regulator *arm_reg; static struct regulator *pu_reg; static struct regulator *soc_reg; -static struct clk *arm_clk; -static struct clk *pll1_sys_clk; -static struct clk *pll1_sw_clk; -static struct clk *step_clk; -static struct clk *pll2_pfd2_396m_clk; - -/* clk used by i.MX6UL */ -static struct clk *pll2_bus_clk; -static struct clk *secondary_sel_clk; +enum IMX6_CPUFREQ_CLKS { + ARM, + PLL1_SYS, + STEP, + PLL1_SW, + PLL2_PFD2_396M, + /* MX6UL requires two more clks */ + PLL2_BUS, + SECONDARY_SEL, +}; +#define IMX6Q_CPUFREQ_CLK_NUM 5 +#define IMX6UL_CPUFREQ_CLK_NUM 7 + +static int num_clks; +static struct clk_bulk_data clks[] = { + { .id = "arm" }, + { .id = "pll1_sys" }, + { .id = "step" }, + { .id = "pll1_sw" }, + { .id = "pll2_pfd2_396m" }, + { .id = "pll2_bus" }, + { .id = "secondary_sel" }, +}; static struct device *cpu_dev; static bool free_opp; @@ -53,7 +67,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) new_freq = freq_table[index].frequency; freq_hz = new_freq * 1000; - old_freq = clk_get_rate(arm_clk) / 1000; + old_freq = clk_get_rate(clks[ARM].clk) / 1000; opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); if (IS_ERR(opp)) { @@ -112,29 +126,31 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) * voltage of 528MHz, so lower the CPU frequency to one * half before changing CPU frequency. */ - clk_set_rate(arm_clk, (old_freq >> 1) * 1000); - clk_set_parent(pll1_sw_clk, pll1_sys_clk); - if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) - clk_set_parent(secondary_sel_clk, pll2_bus_clk); + clk_set_rate(clks[ARM].clk, (old_freq >> 1) * 1000); + clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk); + if (freq_hz > clk_get_rate(clks[PLL2_PFD2_396M].clk)) + clk_set_parent(clks[SECONDARY_SEL].clk, + clks[PLL2_BUS].clk); else - clk_set_parent(secondary_sel_clk, pll2_pfd2_396m_clk); - clk_set_parent(step_clk, secondary_sel_clk); - clk_set_parent(pll1_sw_clk, step_clk); + clk_set_parent(clks[SECONDARY_SEL].clk, + clks[PLL2_PFD2_396M].clk); + clk_set_parent(clks[STEP].clk, clks[SECONDARY_SEL].clk); + clk_set_parent(clks[PLL1_SW].clk, clks[STEP].clk); } else { - clk_set_parent(step_clk, pll2_pfd2_396m_clk); - clk_set_parent(pll1_sw_clk, step_clk); - if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) { - clk_set_rate(pll1_sys_clk, new_freq * 1000); - clk_set_parent(pll1_sw_clk, pll1_sys_clk); + clk_set_parent(clks[STEP].clk, clks[PLL2_PFD2_396M].clk); + clk_set_parent(clks[PLL1_SW].clk, clks[STEP].clk); + if (freq_hz > clk_get_rate(clks[PLL2_PFD2_396M].clk)) { + clk_set_rate(clks[PLL1_SYS].clk, new_freq * 1000); + clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk); } else { /* pll1_sys needs to be enabled for divider rate change to work. */ pll1_sys_temp_enabled = true; - clk_prepare_enable(pll1_sys_clk); + clk_prepare_enable(clks[PLL1_SYS].clk); } } /* Ensure the arm clock divider is what we expect */ - ret = clk_set_rate(arm_clk, new_freq * 1000); + ret = clk_set_rate(clks[ARM].clk, new_freq * 1000); if (ret) { dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); regulator_set_voltage_tol(arm_reg, volt_old, 0); @@ -143,7 +159,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) /* PLL1 is only needed until after ARM-PODF is set. */ if (pll1_sys_temp_enabled) - clk_disable_unprepare(pll1_sys_clk); + clk_disable_unprepare(clks[PLL1_SYS].clk); /* scaling down? scale voltage after frequency */ if (new_freq < old_freq) { @@ -174,7 +190,7 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy) { int ret; - policy->clk = arm_clk; + policy->clk = clks[ARM].clk; ret = cpufreq_generic_init(policy, freq_table, transition_latency); policy->suspend_freq = policy->max; @@ -266,28 +282,15 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) return -ENOENT; } - arm_clk = clk_get(cpu_dev, "arm"); - pll1_sys_clk = clk_get(cpu_dev, "pll1_sys"); - pll1_sw_clk = clk_get(cpu_dev, "pll1_sw"); - step_clk = clk_get(cpu_dev, "step"); - pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m"); - if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) || - IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) { - dev_err(cpu_dev, "failed to get clocks\n"); - ret = -ENOENT; - goto put_clk; - } - if (of_machine_is_compatible("fsl,imx6ul") || - of_machine_is_compatible("fsl,imx6ull")) { - pll2_bus_clk = clk_get(cpu_dev, "pll2_bus"); - secondary_sel_clk = clk_get(cpu_dev, "secondary_sel"); - if (IS_ERR(pll2_bus_clk) || IS_ERR(secondary_sel_clk)) { - dev_err(cpu_dev, "failed to get clocks specific to imx6ul\n"); - ret = -ENOENT; - goto put_clk; - } - } + of_machine_is_compatible("fsl,imx6ull")) + num_clks = IMX6UL_CPUFREQ_CLK_NUM; + else + num_clks = IMX6Q_CPUFREQ_CLK_NUM; + + ret = clk_bulk_get(cpu_dev, num_clks, clks); + if (ret) + goto put_node; arm_reg = regulator_get(cpu_dev, "arm"); pu_reg = regulator_get_optional(cpu_dev, "pu"); @@ -424,22 +427,11 @@ put_reg: regulator_put(pu_reg); if (!IS_ERR(soc_reg)) regulator_put(soc_reg); -put_clk: - if (!IS_ERR(arm_clk)) - clk_put(arm_clk); - if (!IS_ERR(pll1_sys_clk)) - clk_put(pll1_sys_clk); - if (!IS_ERR(pll1_sw_clk)) - clk_put(pll1_sw_clk); - if (!IS_ERR(step_clk)) - clk_put(step_clk); - if (!IS_ERR(pll2_pfd2_396m_clk)) - clk_put(pll2_pfd2_396m_clk); - if (!IS_ERR(pll2_bus_clk)) - clk_put(pll2_bus_clk); - if (!IS_ERR(secondary_sel_clk)) - clk_put(secondary_sel_clk); + + clk_bulk_put(num_clks, clks); +put_node: of_node_put(np); + return ret; } @@ -453,13 +445,8 @@ static int imx6q_cpufreq_remove(struct platform_device *pdev) if (!IS_ERR(pu_reg)) regulator_put(pu_reg); regulator_put(soc_reg); - clk_put(arm_clk); - clk_put(pll1_sys_clk); - clk_put(pll1_sw_clk); - clk_put(step_clk); - clk_put(pll2_pfd2_396m_clk); - clk_put(pll2_bus_clk); - clk_put(secondary_sel_clk); + + clk_bulk_put(num_clks, clks); return 0; } -- 2.30.2