From 2259b7a64d71f27311a19fd7a5bed47413d75985 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Mon, 25 Jun 2018 15:07:12 +0100 Subject: [PATCH] net: lan78xx: Allow for VLAN headers in timeout calcs The frame abort timeout being set by lan78xx_set_rx_max_frame_length didn't account for any VLAN headers, resulting in very low throughput if used with tagged VLANs. Use VLAN_ETH_HLEN instead of ETH_HLEN to correct for this. Signed-off-by: Dave Stevenson Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 8dff87ec6d99..1a1d3cc8e308 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2298,7 +2298,7 @@ static int lan78xx_change_mtu(struct net_device *netdev, int new_mtu) if ((ll_mtu % dev->maxpacket) == 0) return -EDOM; - ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN); + ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + VLAN_ETH_HLEN); netdev->mtu = new_mtu; @@ -2587,7 +2587,8 @@ static int lan78xx_reset(struct lan78xx_net *dev) buf |= FCT_TX_CTL_EN_; ret = lan78xx_write_reg(dev, FCT_TX_CTL, buf); - ret = lan78xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN); + ret = lan78xx_set_rx_max_frame_length(dev, + dev->net->mtu + VLAN_ETH_HLEN); ret = lan78xx_read_reg(dev, MAC_RX, &buf); buf |= MAC_RX_RXEN_; -- 2.30.2