From 21dc61d3c0a4c0ee11e3e4a4e4888d4c71875b6d Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 6 Aug 2012 22:47:10 -0300 Subject: [PATCH] [media] au0828: tweak workaround for i2c clock stretching bug The hack I put in a couple of years ago to avoid clock stretching issues when talking to the xc5000 worked fine for writes, but intermittently fails for register reads, because the xc5000 may stretch the clock for longer between bytes (I was seeing cases of 21 us on the analyzer). The problem manifested itself as the xc5000 firmware version and PLL lock register intermittently showing garbage values. Slow down the i2c bus from 30 KHz to 20 KHz to accommodate. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/au0828/au0828-cards.c | 4 ++-- drivers/media/video/au0828/au0828-reg.h | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index e3fe9a6637f6..448361c6a13e 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -46,7 +46,7 @@ struct au0828_board au0828_boards[] = { .name = "Hauppauge HVR850", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, - .i2c_clk_divider = AU0828_I2C_CLK_30KHZ, + .i2c_clk_divider = AU0828_I2C_CLK_20KHZ, .input = { { .type = AU0828_VMUX_TELEVISION, @@ -77,7 +77,7 @@ struct au0828_board au0828_boards[] = { stretch fits inside of a normal clock cycle, or else the au0828 fails to set the STOP bit. A 30 KHz clock puts the clock pulse width at 18us */ - .i2c_clk_divider = AU0828_I2C_CLK_30KHZ, + .i2c_clk_divider = AU0828_I2C_CLK_20KHZ, .input = { { .type = AU0828_VMUX_TELEVISION, diff --git a/drivers/media/video/au0828/au0828-reg.h b/drivers/media/video/au0828/au0828-reg.h index c39f3d2b721e..2140f4cfb645 100644 --- a/drivers/media/video/au0828/au0828-reg.h +++ b/drivers/media/video/au0828/au0828-reg.h @@ -63,3 +63,4 @@ #define AU0828_I2C_CLK_250KHZ 0x07 #define AU0828_I2C_CLK_100KHZ 0x14 #define AU0828_I2C_CLK_30KHZ 0x40 +#define AU0828_I2C_CLK_20KHZ 0x60 -- 2.30.2