From 21be2c26d555b33e9faf85be3e980876810b29d3 Mon Sep 17 00:00:00 2001 From: Chukun Pan Date: Fri, 10 Feb 2023 23:08:25 +0800 Subject: [PATCH] mediatek: add support for TP-Link TL-XDR4288/608x Hardware specification: SoC: MediaTek MT7986A 4x A53 Flash: ESMT F50L1G41LB 128MB RAM: ESMT M15T4G16256A 512MB Ethernet (Max Speed): XDR4288: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan XDR6086: 1x 2.5G Wan, 1x 2.5G Lan, 1x 1G Lan XDR6088: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan WiFi: XDR4288: MT7976DAN (2.4G 2T2R, 5G 3T3R) XDR6086/XDR6088: WiFi1: MT7976GN 2.4GHz 4T4R WiFi2: MT7976AN 5GHz 4T4R Button: Reset, WPS, Turbo USB: 1 x USB 3.0 Power: DC 12V 4A Flash instructions: 1. Execute the following operation to open nc shell: https://openwrt.org/inbox/toh/tp-link/xdr-6086#rooting 2. Replace the stock bootloader to OpenWrt's: dd bs=131072 conv=sync of=/dev/mtdblock9 if=/tmp/xxx-preloader.bin dd bs=131072 conv=sync of=/dev/mtdblock9 seek=28 if=/tmp/xxx-bl31-uboot.fip 3. Connect to your PC via the Gigabit port of the router, set a static ip on the ethernet interface of your PC. (ip 192.168.1.254, gateway 192.168.1.1) 4. Download the initramfs image, and restart the router, waiting for tftp recovery to complete. 5. After openwrt boots up, perform sysupgrade. Signed-off-by: Chukun Pan [Add uboot build, fit and sysupgrade support, fix RealTek PHYs] Signed-off-by: Daniel Golle --- .../dts/mt7986a-tplink-tl-xdr-common.dtsi | 258 ++++++++++++++++++ .../dts/mt7986a-tplink-tl-xdr4288.dts | 79 ++++++ .../dts/mt7986a-tplink-tl-xdr6086.dts | 64 +++++ .../dts/mt7986a-tplink-tl-xdr6088.dts | 79 ++++++ .../filogic/base-files/etc/board.d/02_network | 7 + .../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 5 + .../base-files/lib/upgrade/platform.sh | 11 +- target/linux/mediatek/image/filogic.mk | 44 +++ 8 files changed, 543 insertions(+), 4 deletions(-) create mode 100644 target/linux/mediatek/dts/mt7986a-tplink-tl-xdr-common.dtsi create mode 100644 target/linux/mediatek/dts/mt7986a-tplink-tl-xdr4288.dts create mode 100644 target/linux/mediatek/dts/mt7986a-tplink-tl-xdr6086.dts create mode 100644 target/linux/mediatek/dts/mt7986a-tplink-tl-xdr6088.dts diff --git a/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr-common.dtsi b/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr-common.dtsi new file mode 100644 index 0000000000..739e500a12 --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr-common.dtsi @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include + +#include "mt7986a.dtsi" + +/ { + aliases { + serial0 = &uart0; + label-mac-device = &gmac0; + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_red; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0 0x40000000 0 0x20000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = ; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + + turbo { + label = "turbo"; + linux,code = ; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: status_red { + label = "red:status"; + gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + }; + + led_status_green: status_green { + label = "green:status"; + gpios = <&pio 8 GPIO_ACTIVE_HIGH>; + }; + + turbo { + label = "green:turbo"; + gpios = <&pio 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cells = <&macaddr_config_1c>; + nvmem-cell-names = "mac-address"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy7>; + phy-mode = "2500base-x"; + + nvmem-cells = <&macaddr_config_1c>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + phy5: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <5>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&pio 13 GPIO_ACTIVE_LOW>; + realtek,aldps-enable; + }; + + phy7: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <7>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&pio 17 GPIO_ACTIVE_LOW>; + realtek,aldps-enable; + }; + + switch: switch@31 { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <20000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x000000 0x0100000>; + read-only; + }; + + config: partition@100000 { + label = "config"; + reg = <0x100000 0x0060000>; + read-only; + }; + + factory: partition@160000 { + label = "factory"; + reg = <0x160000 0x0060000>; + read-only; + }; + + partition@1c0000 { + label = "reserved"; + reg = <0x1c0000 0x01c0000>; + read-only; + }; + + partition@380000 { + label = "fip"; + reg = <0x380000 0x0200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x7800000>; + }; + }; + }; +}; + +&pio { + spi_flash_pins: spi-flash-pins-33-to-38 { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <8>; + mediatek,pull-down-adv = <0>; /* bias-disable */ + }; + }; +}; + +&ssusb { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&wmac { + mediatek,mtd-eeprom = <&factory 0x0>; + nvmem-cells = <&macaddr_config_1c>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <2>; + status = "okay"; +}; + +&config { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_config_1c: macaddr@1c { + reg = <0x1c 0x6>; + }; +}; diff --git a/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr4288.dts b/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr4288.dts new file mode 100644 index 0000000000..b7f7d2d371 --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr4288.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; +#include "mt7986a-tplink-tl-xdr-common.dtsi" + +/ { + model = "TP-Link TL-XDR4288"; + compatible = "tplink,tl-xdr4288", "mediatek,mt7986a"; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "lan5"; + phy-handle = <&phy5>; + phy-mode = "2500base-x"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&pio { + wf_dbdc_pins: wf-dbdc-pins { + mux { + function = "wifi"; + groups = "wf_dbdc"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&wmac { + pinctrl-names = "dbdc"; + pinctrl-0 = <&wf_dbdc_pins>; +}; diff --git a/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr6086.dts b/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr6086.dts new file mode 100644 index 0000000000..ffe57e5502 --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr6086.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; +#include "mt7986a-tplink-tl-xdr-common.dtsi" + +/ { + model = "TP-Link TL-XDR6086"; + compatible = "tplink,tl-xdr6086", "mediatek,mt7986a"; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@5 { + reg = <5>; + label = "lan2"; + phy-handle = <&phy5>; + phy-mode = "2500base-x"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&pio { + wf_2g_5g_pins: wf_2g_5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&wmac { + pinctrl-names = "default"; + pinctrl-0 = <&wf_2g_5g_pins>; +}; diff --git a/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr6088.dts b/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr6088.dts new file mode 100644 index 0000000000..213f89918f --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-tplink-tl-xdr6088.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; +#include "mt7986a-tplink-tl-xdr-common.dtsi" + +/ { + model = "TP-Link TL-XDR6088"; + compatible = "tplink,tl-xdr6088", "mediatek,mt7986a"; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "lan5"; + phy-handle = <&phy5>; + phy-mode = "2500base-x"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&pio { + wf_2g_5g_pins: wf_2g_5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&wmac { + pinctrl-names = "default"; + pinctrl-0 = <&wf_2g_5g_pins>; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 6cb9e1478e..4207a5873f 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -20,6 +20,13 @@ mediatek_setup_interfaces() mediatek,mt7986b-rfb) ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" eth1 ;; + tplink,tl-xdr4288|\ + tplink,tl-xdr6088) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" eth1 + ;; + tplink,tl-xdr6086) + ucidef_set_interfaces_lan_wan "lan1 lan2" eth1 + ;; xiaomi,redmi-router-ax6000-stock|\ xiaomi,redmi-router-ax6000-ubootmod) ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" wan diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index ecaf2eadcd..b4c1c8f1d0 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -24,4 +24,9 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_unsetbit $addr 6 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_setbit $addr 6 > /sys${DEVPATH}/macaddress ;; + tplink,tl-xdr4288|\ + tplink,tl-xdr6086|\ + tplink,tl-xdr6088) + [ "$PHYNBR" = "0" ] && get_mac_label > /sys${DEVPATH}/macaddress + ;; esac diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index ca09741030..9dafe1a97b 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -67,15 +67,18 @@ platform_do_upgrade() { ;; esac ;; + tplink,tl-xdr4288|\ + tplink,tl-xdr6086|\ + tplink,tl-xdr6088|\ + xiaomi,redmi-router-ax6000-ubootmod) + CI_KERNPART="fit" + nand_do_upgrade "$1" + ;; xiaomi,redmi-router-ax6000-stock) CI_KERN_UBIPART=ubi_kernel CI_ROOT_UBIPART=ubi nand_do_upgrade "$1" ;; - xiaomi,redmi-router-ax6000-ubootmod) - CI_KERNPART="fit" - nand_do_upgrade "$1" - ;; *) nand_do_upgrade "$1" ;; diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 3538ec1b86..1259d08152 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -141,6 +141,50 @@ define Device/mediatek_mt7986b-rfb endef TARGET_DEVICES += mediatek_mt7986b-rfb +define Device/tplink_tl-xdr-common + DEVICE_VENDOR := TP-Link + DEVICE_DTS_DIR := ../dts + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_IN_UBI := 1 + UBOOTENV_IN_UBI := 1 + IMAGES := sysupgrade.itb + KERNEL_INITRAMFS_SUFFIX := -recovery.itb + KERNEL := kernel-bin | gzip + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.itb := append-kernel | \ + fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata + DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware + ARTIFACTS := preloader.bin bl31-uboot.fip + ARTIFACT/preloader.bin := bl2 spim-nand-ddr3 +endef + +define Device/tplink_tl-xdr4288 + DEVICE_MODEL := TL-XDR4288 + DEVICE_DTS := mt7986a-tplink-tl-xdr4288 + ARTIFACT/bl31-uboot.fip := bl31-uboot tplink_tl-xdr4288 + $(call Device/tplink_tl-xdr-common) +endef +TARGET_DEVICES += tplink_tl-xdr4288 + +define Device/tplink_tl-xdr6086 + DEVICE_MODEL := TL-XDR6086 + DEVICE_DTS := mt7986a-tplink-tl-xdr6086 + ARTIFACT/bl31-uboot.fip := bl31-uboot tplink_tl-xdr6086 + $(call Device/tplink_tl-xdr-common) +endef +TARGET_DEVICES += tplink_tl-xdr6086 + +define Device/tplink_tl-xdr6088 + DEVICE_MODEL := TL-XDR6088 + DEVICE_DTS := mt7986a-tplink-tl-xdr6088 + ARTIFACT/bl31-uboot.fip := bl31-uboot tplink_tl-xdr6088 + $(call Device/tplink_tl-xdr-common) +endef +TARGET_DEVICES += tplink_tl-xdr6088 + define Device/xiaomi_redmi-router-ax6000-stock DEVICE_VENDOR := Xiaomi DEVICE_MODEL := Redmi Router AX6000 (stock layout) -- 2.30.2