From 2165c4a1f71a04c7ea6493f18740a3afd4e47e4f Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 16 May 2017 18:35:45 +0200 Subject: [PATCH] mtd: nand: Support 'EXIT GET STATUS' command in nand_command[_lp]() READ0 is sometimes used to exit GET STATUS mode. When this is the case no address cycles are requested, and we can use this information to detect that READSTART should not be issued after READ0 or that we shouldn't wait for the chip to be ready. Signed-off-by: Boris Brezillon Tested-by: Thomas Petazzoni --- drivers/mtd/nand/nand_base.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 4b4fea4a3d1f..58a97e30b3f4 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -753,6 +753,16 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, return; /* This applies to read commands */ + case NAND_CMD_READ0: + /* + * READ0 is sometimes used to exit GET STATUS mode. When this + * is the case no address cycles are requested, and we can use + * this information to detect that we should not wait for the + * device to be ready. + */ + if (column == -1 && page_addr == -1) + return; + default: /* * If we don't have access to the busy pin, we apply the given @@ -887,6 +897,15 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, return; case NAND_CMD_READ0: + /* + * READ0 is sometimes used to exit GET STATUS mode. When this + * is the case no address cycles are requested, and we can use + * this information to detect that READSTART should not be + * issued. + */ + if (column == -1 && page_addr == -1) + return; + chip->cmd_ctrl(mtd, NAND_CMD_READSTART, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, -- 2.30.2