From 211f658b7b40fd3355a0920481132645e24ffb16 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 10 Jun 2018 16:01:22 +0200 Subject: [PATCH] usb: dwc3: pci: Use devm functions to get the phy GPIOs Even though we only use them once, it is better to not put/release the GPIOs immediately after use, so that others cannot claim them. Use devm functions to get the phy GPIOs, so that they will be automatically released when were unbound from the device and remove the gpio_put calls. Signed-off-by: Hans de Goede Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 26829b299482..08713398073d 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -177,20 +177,20 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) * put the gpio descriptors again here because the phy driver * might want to grab them, too. */ - gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW); + gpio = devm_gpiod_get_optional(&pdev->dev, "cs", + GPIOD_OUT_LOW); if (IS_ERR(gpio)) return PTR_ERR(gpio); gpiod_set_value_cansleep(gpio, 1); - gpiod_put(gpio); - gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW); + gpio = devm_gpiod_get_optional(&pdev->dev, "reset", + GPIOD_OUT_LOW); if (IS_ERR(gpio)) return PTR_ERR(gpio); if (gpio) { gpiod_set_value_cansleep(gpio, 1); - gpiod_put(gpio); usleep_range(10000, 11000); } } -- 2.30.2