From 203e41514a557b71c4c42b4bb2912b56fa0c2fdc Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 5 Dec 2012 08:40:59 +0000 Subject: [PATCH] e1000e: add ethtool .get_eee/.set_eee Add the ability to query and set Energy Efficient Ethernet parameters via ethtool for applicable devices. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/defines.h | 30 +++++ drivers/net/ethernet/intel/e1000e/e1000.h | 1 + drivers/net/ethernet/intel/e1000e/ethtool.c | 134 ++++++++++++++++++++ drivers/net/ethernet/intel/e1000e/hw.h | 1 + drivers/net/ethernet/intel/e1000e/ich8lan.c | 24 +--- 5 files changed, 167 insertions(+), 23 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 7326ea2fef8f..3041a54e3a61 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -383,6 +383,9 @@ #define E1000_KABGTXD_BGSQLBIAS 0x00050000 +/* Low Power IDLE Control */ +#define E1000_LPIC_LPIET_SHIFT 24 /* Low Power Idle Entry Time */ + /* PBA constants */ #define E1000_PBA_8K 0x0008 /* 8KB */ #define E1000_PBA_16K 0x0010 /* 16KB */ @@ -799,6 +802,33 @@ /* BME1000 PHY Specific Control Register */ #define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */ +/* PHY Low Power Idle Control */ +#define I82579_LPI_CTRL PHY_REG(772, 20) +#define I82579_LPI_CTRL_100_ENABLE 0x2000 +#define I82579_LPI_CTRL_1000_ENABLE 0x4000 +#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 + +/* Extended Management Interface (EMI) Registers */ +#define I82579_EMI_ADDR 0x10 +#define I82579_EMI_DATA 0x11 +#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ +#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */ +#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ +#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ +#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */ +#define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */ +#define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */ +#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */ +#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */ +#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE supported */ +#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */ +#define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */ +#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ +#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ + +#define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */ +#define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */ #define PHY_PAGE_SHIFT 5 #define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 3f8bbc31795c..b89b181da7b1 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -659,6 +659,7 @@ extern s32 e1000_check_polarity_ife(struct e1000_hw *hw); extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); extern s32 e1000_check_polarity_igp(struct e1000_hw *hw); extern bool e1000_check_phy_82574(struct e1000_hw *hw); +extern s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data); static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw) { diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 2225603a8a28..636ba09ca6fb 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -35,6 +35,7 @@ #include #include #include +#include #include "e1000.h" @@ -2050,6 +2051,137 @@ static int e1000_get_rxnfc(struct net_device *netdev, } } +static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 cap_addr, adv_addr, lpa_addr, pcs_stat_addr, phy_data, lpi_ctrl; + u32 status, ret_val; + + if (!(adapter->flags & FLAG_IS_ICH) || + !(adapter->flags2 & FLAG2_HAS_EEE)) + return -EOPNOTSUPP; + + switch (hw->phy.type) { + case e1000_phy_82579: + cap_addr = I82579_EEE_CAPABILITY; + adv_addr = I82579_EEE_ADVERTISEMENT; + lpa_addr = I82579_EEE_LP_ABILITY; + pcs_stat_addr = I82579_EEE_PCS_STATUS; + break; + case e1000_phy_i217: + cap_addr = I217_EEE_CAPABILITY; + adv_addr = I217_EEE_ADVERTISEMENT; + lpa_addr = I217_EEE_LP_ABILITY; + pcs_stat_addr = I217_EEE_PCS_STATUS; + break; + default: + return -EOPNOTSUPP; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return -EBUSY; + + /* EEE Capability */ + ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data); + if (ret_val) + goto release; + edata->supported = mmd_eee_cap_to_ethtool_sup_t(phy_data); + + /* EEE Advertised */ + ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &phy_data); + if (ret_val) + goto release; + edata->advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + /* EEE Link Partner Advertised */ + ret_val = e1000_read_emi_reg_locked(hw, lpa_addr, &phy_data); + if (ret_val) + goto release; + edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + /* EEE PCS Status */ + ret_val = e1000_read_emi_reg_locked(hw, pcs_stat_addr, &phy_data); + if (hw->phy.type == e1000_phy_82579) + phy_data <<= 8; + +release: + hw->phy.ops.release(hw); + if (ret_val) + return -ENODATA; + + e1e_rphy(hw, I82579_LPI_CTRL, &lpi_ctrl); + status = er32(STATUS); + + /* Result of the EEE auto negotiation - there is no register that + * has the status of the EEE negotiation so do a best-guess based + * on whether both Tx and Rx LPI indications have been received or + * base it on the link speed, the EEE advertised speeds on both ends + * and the speeds on which EEE is enabled locally. + */ + if (((phy_data & E1000_EEE_TX_LPI_RCVD) && + (phy_data & E1000_EEE_RX_LPI_RCVD)) || + ((status & E1000_STATUS_SPEED_100) && + (edata->advertised & ADVERTISED_100baseT_Full) && + (edata->lp_advertised & ADVERTISED_100baseT_Full) && + (lpi_ctrl & I82579_LPI_CTRL_100_ENABLE)) || + ((status & E1000_STATUS_SPEED_1000) && + (edata->advertised & ADVERTISED_1000baseT_Full) && + (edata->lp_advertised & ADVERTISED_1000baseT_Full) && + (lpi_ctrl & I82579_LPI_CTRL_1000_ENABLE))) + edata->eee_active = true; + + edata->eee_enabled = !hw->dev_spec.ich8lan.eee_disable; + edata->tx_lpi_enabled = true; + edata->tx_lpi_timer = er32(LPIC) >> E1000_LPIC_LPIET_SHIFT; + + return 0; +} + +static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct ethtool_eee eee_curr; + s32 ret_val; + + if (!(adapter->flags & FLAG_IS_ICH) || + !(adapter->flags2 & FLAG2_HAS_EEE)) + return -EOPNOTSUPP; + + ret_val = e1000e_get_eee(netdev, &eee_curr); + if (ret_val) + return ret_val; + + if (eee_curr.advertised != edata->advertised) { + e_err("Setting EEE advertisement is not supported\n"); + return -EINVAL; + } + + if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) { + e_err("Setting EEE tx-lpi is not supported\n"); + return -EINVAL; + } + + if (eee_curr.tx_lpi_timer != edata->tx_lpi_timer) { + e_err("Setting EEE Tx LPI timer is not supported\n"); + return -EINVAL; + } + + if (hw->dev_spec.ich8lan.eee_disable != !edata->eee_enabled) { + hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled; + + /* reset the link */ + if (netif_running(netdev)) + e1000e_reinit_locked(adapter); + else + e1000e_reset(adapter); + } + + return 0; +} + static const struct ethtool_ops e1000_ethtool_ops = { .get_settings = e1000_get_settings, .set_settings = e1000_set_settings, @@ -2078,6 +2210,8 @@ static const struct ethtool_ops e1000_ethtool_ops = { .set_coalesce = e1000_set_coalesce, .get_rxnfc = e1000_get_rxnfc, .get_ts_info = ethtool_op_get_ts_info, + .get_eee = e1000e_get_eee, + .set_eee = e1000e_set_eee, }; void e1000e_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 06239fe47db1..81afad5b80f2 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -62,6 +62,7 @@ enum e1e_registers { E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */ E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */ #define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2)) + E1000_LPIC = 0x000FC, /* Low Power Idle Control - RW */ E1000_RCTL = 0x00100, /* Rx Control - RW */ E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */ E1000_TXCW = 0x00178, /* Tx Configuration Word - RW */ diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 051dfda75fc0..3829f7fd1d97 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -148,28 +148,6 @@ #define HV_PM_CTRL PHY_REG(770, 17) #define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 -/* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_100_ENABLE 0x2000 -#define I82579_LPI_CTRL_1000_ENABLE 0x4000 -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 -#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 - -/* Extended Management Interface (EMI) Registers */ -#define I82579_EMI_ADDR 0x10 -#define I82579_EMI_DATA 0x11 -#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ -#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */ -#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ -#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ -#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */ -#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */ -#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */ -#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE supported */ -#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */ -#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ -#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ - /* Intel Rapid Start Technology Support */ #define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70) #define I217_PROXY_CTRL_AUTO_DISABLE 0x0080 @@ -829,7 +807,7 @@ static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address, * * Assumes the SW/FW/HW Semaphore is already acquired. **/ -static s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data) +s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data) { return __e1000_access_emi_reg_locked(hw, addr, data, true); } -- 2.30.2