From 1f7a03a7060390ea5ea9f80d520527051653b7fc Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Sun, 2 Oct 2016 14:27:45 +0200 Subject: [PATCH] lantiq: drop lzma-loader It isn't used any more. Signed-off-by: Mathias Kresin --- .../linux/lantiq/image/lzma-loader/Makefile | 65 -- .../lantiq/image/lzma-loader/src/LzmaDecode.c | 584 -------------- .../lantiq/image/lzma-loader/src/LzmaDecode.h | 113 --- .../lantiq/image/lzma-loader/src/LzmaTypes.h | 45 -- .../lantiq/image/lzma-loader/src/Makefile | 110 --- .../lantiq/image/lzma-loader/src/ar71xx.mk | 1 - .../image/lzma-loader/src/ar71xx_regs.h | 725 ------------------ .../image/lzma-loader/src/board-ar71xx.c | 56 -- .../image/lzma-loader/src/board-lantiq.c | 33 - .../image/lzma-loader/src/board-ralink.c | 42 - .../lantiq/image/lzma-loader/src/cache.c | 43 -- .../lantiq/image/lzma-loader/src/cache.h | 17 - .../lantiq/image/lzma-loader/src/cacheops.h | 85 -- .../lantiq/image/lzma-loader/src/config.h | 27 - .../lantiq/image/lzma-loader/src/cp0regdef.h | 39 - .../linux/lantiq/image/lzma-loader/src/head.S | 121 --- .../lantiq/image/lzma-loader/src/lantiq.mk | 1 - .../lantiq/image/lzma-loader/src/loader.c | 263 ------- .../lantiq/image/lzma-loader/src/loader.lds | 35 - .../lantiq/image/lzma-loader/src/loader2.lds | 10 - .../image/lzma-loader/src/lzma-data.lds | 8 - .../lantiq/image/lzma-loader/src/printf.c | 350 --------- .../lantiq/image/lzma-loader/src/printf.h | 18 - .../lantiq/image/lzma-loader/src/ralink.mk | 1 - 24 files changed, 2792 deletions(-) delete mode 100644 target/linux/lantiq/image/lzma-loader/Makefile delete mode 100644 target/linux/lantiq/image/lzma-loader/src/LzmaDecode.c delete mode 100644 target/linux/lantiq/image/lzma-loader/src/LzmaDecode.h delete mode 100644 target/linux/lantiq/image/lzma-loader/src/LzmaTypes.h delete mode 100644 target/linux/lantiq/image/lzma-loader/src/Makefile delete mode 100644 target/linux/lantiq/image/lzma-loader/src/ar71xx.mk delete mode 100644 target/linux/lantiq/image/lzma-loader/src/ar71xx_regs.h delete mode 100644 target/linux/lantiq/image/lzma-loader/src/board-ar71xx.c delete mode 100644 target/linux/lantiq/image/lzma-loader/src/board-lantiq.c delete mode 100644 target/linux/lantiq/image/lzma-loader/src/board-ralink.c delete mode 100644 target/linux/lantiq/image/lzma-loader/src/cache.c delete mode 100644 target/linux/lantiq/image/lzma-loader/src/cache.h delete mode 100644 target/linux/lantiq/image/lzma-loader/src/cacheops.h delete mode 100644 target/linux/lantiq/image/lzma-loader/src/config.h delete mode 100644 target/linux/lantiq/image/lzma-loader/src/cp0regdef.h delete mode 100644 target/linux/lantiq/image/lzma-loader/src/head.S delete mode 100644 target/linux/lantiq/image/lzma-loader/src/lantiq.mk delete mode 100644 target/linux/lantiq/image/lzma-loader/src/loader.c delete mode 100644 target/linux/lantiq/image/lzma-loader/src/loader.lds delete mode 100644 target/linux/lantiq/image/lzma-loader/src/loader2.lds delete mode 100644 target/linux/lantiq/image/lzma-loader/src/lzma-data.lds delete mode 100644 target/linux/lantiq/image/lzma-loader/src/printf.c delete mode 100644 target/linux/lantiq/image/lzma-loader/src/printf.h delete mode 100644 target/linux/lantiq/image/lzma-loader/src/ralink.mk diff --git a/target/linux/lantiq/image/lzma-loader/Makefile b/target/linux/lantiq/image/lzma-loader/Makefile deleted file mode 100644 index ab6640ac5f..0000000000 --- a/target/linux/lantiq/image/lzma-loader/Makefile +++ /dev/null @@ -1,65 +0,0 @@ -# -# Copyright (C) 2011 OpenWrt.org -# Copyright (C) 2011 Gabor Juhos -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk - -LZMA_TEXT_START := 0x80a00000 -LOADER := loader.bin -LOADER_NAME := $(basename $(notdir $(LOADER))) -LOADER_DATA := -TARGET_DIR := -FLASH_OFFS := -FLASH_MAX := -BOARD := - -ifeq ($(TARGET_DIR),) -TARGET_DIR := $(KDIR) -endif - -LOADER_BIN := $(TARGET_DIR)/$(LOADER_NAME).bin -LOADER_GZ := $(TARGET_DIR)/$(LOADER_NAME).gz -LOADER_ELF := $(TARGET_DIR)/$(LOADER_NAME).elf - -PKG_NAME := lzma-loader -PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME) - -.PHONY : loader-compile loader.bin loader.elf loader.gz - -$(PKG_BUILD_DIR)/.prepared: - mkdir $(PKG_BUILD_DIR) - $(CP) ./src/* $(PKG_BUILD_DIR)/ - touch $@ - -loader-compile: $(PKG_BUILD_DIR)/.prepared - $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \ - LZMA_TEXT_START=$(LZMA_TEXT_START) \ - LOADER_DATA=$(LOADER_DATA) \ - FLASH_OFFS=$(FLASH_OFFS) \ - FLASH_MAX=$(FLASH_MAX) \ - BOARD="$(BOARD)" \ - PLATFORM="lantiq" \ - clean all - -loader.gz: $(PKG_BUILD_DIR)/loader.bin - gzip -nc9 $< > $(LOADER_GZ) - -loader.elf: $(PKG_BUILD_DIR)/loader.elf - $(CP) $< $(LOADER_ELF) - -loader.bin: $(PKG_BUILD_DIR)/loader.bin - $(CP) $< $(LOADER_BIN) - -download: -prepare: $(PKG_BUILD_DIR)/.prepared -compile: loader-compile - -install: - -clean: - rm -rf $(PKG_BUILD_DIR) - diff --git a/target/linux/lantiq/image/lzma-loader/src/LzmaDecode.c b/target/linux/lantiq/image/lzma-loader/src/LzmaDecode.c deleted file mode 100644 index cb8345377e..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/LzmaDecode.c +++ /dev/null @@ -1,584 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - -#ifdef _LZMA_IN_CB - -#define RC_TEST { if (Buffer == BufferLim) \ - { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ - BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} - -#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 - -#else - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - -#endif - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) -{ - unsigned char prop0; - if (size < LZMA_PROPERTIES_SIZE) - return LZMA_RESULT_DATA_ERROR; - prop0 = propsData[0]; - if (prop0 >= (9 * 5 * 5)) - return LZMA_RESULT_DATA_ERROR; - { - for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); - for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); - propsRes->lc = prop0; - /* - unsigned char remainder = (unsigned char)(prop0 / 9); - propsRes->lc = prop0 % 9; - propsRes->pb = remainder / 5; - propsRes->lp = remainder % 5; - */ - } - - #ifdef _LZMA_OUT_READ - { - int i; - propsRes->DictionarySize = 0; - for (i = 0; i < 4; i++) - propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8); - if (propsRes->DictionarySize == 0) - propsRes->DictionarySize = 1; - } - #endif - return LZMA_RESULT_OK; -} - -#define kLzmaStreamWasFinishedId (-1) - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) -{ - CProb *p = vs->Probs; - SizeT nowPos = 0; - Byte previousByte = 0; - UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; - UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; - int lc = vs->Properties.lc; - - #ifdef _LZMA_OUT_READ - - UInt32 Range = vs->Range; - UInt32 Code = vs->Code; - #ifdef _LZMA_IN_CB - const Byte *Buffer = vs->Buffer; - const Byte *BufferLim = vs->BufferLim; - #else - const Byte *Buffer = inStream; - const Byte *BufferLim = inStream + inSize; - #endif - int state = vs->State; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - UInt32 distanceLimit = vs->DistanceLimit; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->Properties.DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - Byte tempDictionary[4]; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - if (len == kLzmaStreamWasFinishedId) - return LZMA_RESULT_OK; - - if (dictionarySize == 0) - { - dictionary = tempDictionary; - dictionarySize = 1; - tempDictionary[0] = vs->TempDictionary[0]; - } - - if (len == kLzmaNeedInitId) - { - { - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - UInt32 i; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - rep0 = rep1 = rep2 = rep3 = 1; - state = 0; - globalPos = 0; - distanceLimit = 0; - dictionaryPos = 0; - dictionary[dictionarySize - 1] = 0; - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - } - len = 0; - } - while(len != 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; - - #else /* if !_LZMA_OUT_READ */ - - int state = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - int len = 0; - const Byte *Buffer; - const Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - - { - UInt32 i; - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - } - - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - - #endif /* _LZMA_OUT_READ */ - - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - UpdateBit0(prob); - - #ifdef _LZMA_OUT_READ - if (distanceLimit == 0) - #else - if (nowPos == 0) - #endif - return LZMA_RESULT_DATA_ERROR; - - state = state < kNumLitStates ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - #endif - - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = kLzmaStreamWasFinishedId; - break; - } - } - - len += kMatchMinLen; - #ifdef _LZMA_OUT_READ - if (rep0 > distanceLimit) - #else - if (rep0 > nowPos) - #endif - return LZMA_RESULT_DATA_ERROR; - - #ifdef _LZMA_OUT_READ - if (dictionarySize - distanceLimit > (UInt32)len) - distanceLimit += len; - else - distanceLimit = dictionarySize; - #endif - - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - #ifdef _LZMA_OUT_READ - vs->Range = Range; - vs->Code = Code; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + (UInt32)nowPos; - vs->DistanceLimit = distanceLimit; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->RemainLen = len; - vs->TempDictionary[0] = tempDictionary[0]; - #endif - - #ifdef _LZMA_IN_CB - vs->Buffer = Buffer; - vs->BufferLim = BufferLim; - #else - *inSizeProcessed = (SizeT)(Buffer - inStream); - #endif - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/target/linux/lantiq/image/lzma-loader/src/LzmaDecode.h b/target/linux/lantiq/image/lzma-loader/src/LzmaDecode.h deleted file mode 100644 index 2870eeb9c9..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/LzmaDecode.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -#include "LzmaTypes.h" - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb UInt16 -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -#define LZMA_PROPERTIES_SIZE 5 - -typedef struct _CLzmaProperties -{ - int lc; - int lp; - int pb; - #ifdef _LZMA_OUT_READ - UInt32 DictionarySize; - #endif -}CLzmaProperties; - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); - -#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) - -#define kLzmaNeedInitId (-2) - -typedef struct _CLzmaDecoderState -{ - CLzmaProperties Properties; - CProb *Probs; - - #ifdef _LZMA_IN_CB - const unsigned char *Buffer; - const unsigned char *BufferLim; - #endif - - #ifdef _LZMA_OUT_READ - unsigned char *Dictionary; - UInt32 Range; - UInt32 Code; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 DistanceLimit; - UInt32 Reps[4]; - int State; - int RemainLen; - unsigned char TempDictionary[4]; - #endif -} CLzmaDecoderState; - -#ifdef _LZMA_OUT_READ -#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; } -#endif - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); - -#endif diff --git a/target/linux/lantiq/image/lzma-loader/src/LzmaTypes.h b/target/linux/lantiq/image/lzma-loader/src/LzmaTypes.h deleted file mode 100644 index 9c27290757..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/LzmaTypes.h +++ /dev/null @@ -1,45 +0,0 @@ -/* -LzmaTypes.h - -Types for LZMA Decoder - -This file written and distributed to public domain by Igor Pavlov. -This file is part of LZMA SDK 4.40 (2006-05-01) -*/ - -#ifndef __LZMATYPES_H -#define __LZMATYPES_H - -#ifndef _7ZIP_BYTE_DEFINED -#define _7ZIP_BYTE_DEFINED -typedef unsigned char Byte; -#endif - -#ifndef _7ZIP_UINT16_DEFINED -#define _7ZIP_UINT16_DEFINED -typedef unsigned short UInt16; -#endif - -#ifndef _7ZIP_UINT32_DEFINED -#define _7ZIP_UINT32_DEFINED -#ifdef _LZMA_UINT32_IS_ULONG -typedef unsigned long UInt32; -#else -typedef unsigned int UInt32; -#endif -#endif - -/* #define _LZMA_NO_SYSTEM_SIZE_T */ -/* You can use it, if you don't want */ - -#ifndef _7ZIP_SIZET_DEFINED -#define _7ZIP_SIZET_DEFINED -#ifdef _LZMA_NO_SYSTEM_SIZE_T -typedef UInt32 SizeT; -#else -#include -typedef size_t SizeT; -#endif -#endif - -#endif diff --git a/target/linux/lantiq/image/lzma-loader/src/Makefile b/target/linux/lantiq/image/lzma-loader/src/Makefile deleted file mode 100644 index 1ea01bfbc5..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/Makefile +++ /dev/null @@ -1,110 +0,0 @@ -# -# Makefile for the LZMA compressed kernel loader for -# Atheros AR7XXX/AR9XXX based boards -# -# Copyright (C) 2011 Gabor Juhos -# -# Some parts of this file was based on the OpenWrt specific lzma-loader -# for the BCM47xx and ADM5120 based boards: -# Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) -# Copyright (C) 2005 Mineharu Takahara -# Copyright (C) 2005 by Oleg I. Vdovikin -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 as published -# by the Free Software Foundation. -# - -LOADADDR := -LZMA_TEXT_START := 0x80a00000 -LOADER_DATA := -BOARD := -FLASH_OFFS := -FLASH_MAX := -PLATFORM := - -CC := $(CROSS_COMPILE)gcc -LD := $(CROSS_COMPILE)ld -OBJCOPY := $(CROSS_COMPILE)objcopy -OBJDUMP := $(CROSS_COMPILE)objdump - -BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug -R .MIPS.abiflags -S - -CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ - -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \ - -mno-abicalls -fno-pic -ffunction-sections -pipe -mlong-calls \ - -fno-common -ffreestanding -fhonour-copts \ - -mabi=32 -march=mips32r2 \ - -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -CFLAGS += -D_LZMA_PROB32 -DARCH=$(PLATFORM) - -ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -LDFLAGS = -static --gc-sections -no-warn-mismatch -LDFLAGS += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START) - -O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32) - -OBJECTS := head.o loader.o cache.o board-$(PLATFORM).o printf.o LzmaDecode.o - -include $(PLATFORM).mk -CFLAGS+=$(CACHE_FLAGS) -ASFLAGS+=$(CACHE_FLAGS) - -ifneq ($(strip $(LOADER_DATA)),) -OBJECTS += data.o -CFLAGS += -DLZMA_WRAPPER=1 -DLOADADDR=$(LOADADDR) -endif - -ifneq ($(strip $(KERNEL_CMDLINE)),) -CFLAGS += -DCONFIG_KERNEL_CMDLINE='"$(KERNEL_CMDLINE)"' -endif - -ifneq ($(strip $(FLASH_OFFS)),) -CFLAGS += -DCONFIG_FLASH_OFFS=$(FLASH_OFFS) -endif - -ifneq ($(strip $(FLASH_MAX)),) -CFLAGS += -DCONFIG_FLASH_MAX=$(FLASH_MAX) -endif - -BOARD_DEF := $(shell echo $(strip $(BOARD)) | tr a-z A-Z | tr - _) -ifneq ($(BOARD_DEF),) -CFLAGS += -DCONFIG_BOARD_$(BOARD_DEF) -endif - -all: loader.elf - -# Don't build dependencies, this may die if $(CC) isn't gcc -dep: - -install: - -%.o : %.c - $(CC) $(CFLAGS) -c -o $@ $< - -%.o : %.S - $(CC) $(ASFLAGS) -c -o $@ $< - -data.o: $(LOADER_DATA) - $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $< - -loader: $(OBJECTS) - $(LD) $(LDFLAGS) -o $@ $(OBJECTS) - -loader.bin: loader - $(OBJCOPY) $(BIN_FLAGS) $< $@ - -loader2.o: loader.bin - $(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $< - -loader.elf: loader2.o - $(LD) -e startup -T loader2.lds -Ttext $(LOADADDR) -o $@ $< - -mrproper: clean - -clean: - rm -f loader *.elf *.bin *.o - - - diff --git a/target/linux/lantiq/image/lzma-loader/src/ar71xx.mk b/target/linux/lantiq/image/lzma-loader/src/ar71xx.mk deleted file mode 100644 index 31541d74fd..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/ar71xx.mk +++ /dev/null @@ -1 +0,0 @@ -CACHE_FLAGS+=-DCONFIG_ICACHE_SIZE="(32 * 1024)" -DCONFIG_DCACHE_SIZE="(64 * 1024)" -DCONFIG_CACHELINE_SIZE=32 diff --git a/target/linux/lantiq/image/lzma-loader/src/ar71xx_regs.h b/target/linux/lantiq/image/lzma-loader/src/ar71xx_regs.h deleted file mode 100644 index 19a4785bb4..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/ar71xx_regs.h +++ /dev/null @@ -1,725 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X SoC register definitions - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan - * Copyright (C) 2008-2010 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_AR71XX_REGS_H -#define __ASM_MACH_AR71XX_REGS_H - -#define BIT(_x) (1UL << (_x)) - -#define AR71XX_APB_BASE 0x18000000 -#define AR71XX_GE0_BASE 0x19000000 -#define AR71XX_GE0_SIZE 0x10000 -#define AR71XX_GE1_BASE 0x1a000000 -#define AR71XX_GE1_SIZE 0x10000 -#define AR71XX_EHCI_BASE 0x1b000000 -#define AR71XX_EHCI_SIZE 0x1000 -#define AR71XX_OHCI_BASE 0x1c000000 -#define AR71XX_OHCI_SIZE 0x1000 -#define AR71XX_SPI_BASE 0x1f000000 -#define AR71XX_SPI_SIZE 0x01000000 - -#define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000) -#define AR71XX_DDR_CTRL_SIZE 0x100 -#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) -#define AR71XX_UART_SIZE 0x100 -#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) -#define AR71XX_USB_CTRL_SIZE 0x100 -#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) -#define AR71XX_GPIO_SIZE 0x100 -#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) -#define AR71XX_PLL_SIZE 0x100 -#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) -#define AR71XX_RESET_SIZE 0x100 -#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) -#define AR71XX_MII_SIZE 0x100 - -#define AR71XX_PCI_MEM_BASE 0x10000000 -#define AR71XX_PCI_MEM_SIZE 0x07000000 - -#define AR71XX_PCI_WIN0_OFFS 0x10000000 -#define AR71XX_PCI_WIN1_OFFS 0x11000000 -#define AR71XX_PCI_WIN2_OFFS 0x12000000 -#define AR71XX_PCI_WIN3_OFFS 0x13000000 -#define AR71XX_PCI_WIN4_OFFS 0x14000000 -#define AR71XX_PCI_WIN5_OFFS 0x15000000 -#define AR71XX_PCI_WIN6_OFFS 0x16000000 -#define AR71XX_PCI_WIN7_OFFS 0x07000000 - -#define AR71XX_PCI_CFG_BASE \ - (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000) -#define AR71XX_PCI_CFG_SIZE 0x100 - -#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) -#define AR7240_USB_CTRL_SIZE 0x100 -#define AR7240_OHCI_BASE 0x1b000000 -#define AR7240_OHCI_SIZE 0x1000 - -#define AR724X_PCI_MEM_BASE 0x10000000 -#define AR724X_PCI_MEM_SIZE 0x04000000 - -#define AR724X_PCI_CFG_BASE 0x14000000 -#define AR724X_PCI_CFG_SIZE 0x1000 -#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000c0000) -#define AR724X_PCI_CRP_SIZE 0x1000 -#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000) -#define AR724X_PCI_CTRL_SIZE 0x100 - -#define AR724X_EHCI_BASE 0x1b000000 -#define AR724X_EHCI_SIZE 0x1000 - -#define AR913X_EHCI_BASE 0x1b000000 -#define AR913X_EHCI_SIZE 0x1000 -#define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) -#define AR913X_WMAC_SIZE 0x30000 - -#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) -#define AR933X_UART_SIZE 0x14 -#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -#define AR933X_GMAC_SIZE 0x04 -#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -#define AR933X_WMAC_SIZE 0x20000 -#define AR933X_EHCI_BASE 0x1b000000 -#define AR933X_EHCI_SIZE 0x1000 - -#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -#define AR934X_GMAC_SIZE 0x14 -#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -#define AR934X_WMAC_SIZE 0x20000 -#define AR934X_EHCI_BASE 0x1b000000 -#define AR934X_EHCI_SIZE 0x200 - -#define QCA955X_PCI_MEM_BASE0 0x10000000 -#define QCA955X_PCI_MEM_BASE1 0x12000000 -#define QCA955X_PCI_MEM_SIZE 0x02000000 -#define QCA955X_PCI_CFG_BASE0 0x14000000 -#define QCA955X_PCI_CFG_BASE1 0x16000000 -#define QCA955X_PCI_CFG_SIZE 0x1000 -#define QCA955X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000) -#define QCA955X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000) -#define QCA955X_PCI_CRP_SIZE 0x1000 -#define QCA955X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000) -#define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) -#define QCA955X_PCI_CTRL_SIZE 0x100 - -#define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -#define QCA955X_WMAC_SIZE 0x20000 -#define QCA955X_EHCI0_BASE 0x1b000000 -#define QCA955X_EHCI1_BASE 0x1b400000 -#define QCA955X_EHCI_SIZE 0x1000 -#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -#define QCA955X_GMAC_SIZE 0x40 - -#define AR9300_OTP_BASE 0x14000 -#define AR9300_OTP_STATUS 0x15f18 -#define AR9300_OTP_STATUS_TYPE 0x7 -#define AR9300_OTP_STATUS_VALID 0x4 -#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 -#define AR9300_OTP_STATUS_SM_BUSY 0x1 -#define AR9300_OTP_READ_DATA 0x15f1c - -/* - * DDR_CTRL block - */ -#define AR71XX_DDR_REG_PCI_WIN0 0x7c -#define AR71XX_DDR_REG_PCI_WIN1 0x80 -#define AR71XX_DDR_REG_PCI_WIN2 0x84 -#define AR71XX_DDR_REG_PCI_WIN3 0x88 -#define AR71XX_DDR_REG_PCI_WIN4 0x8c -#define AR71XX_DDR_REG_PCI_WIN5 0x90 -#define AR71XX_DDR_REG_PCI_WIN6 0x94 -#define AR71XX_DDR_REG_PCI_WIN7 0x98 -#define AR71XX_DDR_REG_FLUSH_GE0 0x9c -#define AR71XX_DDR_REG_FLUSH_GE1 0xa0 -#define AR71XX_DDR_REG_FLUSH_USB 0xa4 -#define AR71XX_DDR_REG_FLUSH_PCI 0xa8 - -#define AR724X_DDR_REG_FLUSH_GE0 0x7c -#define AR724X_DDR_REG_FLUSH_GE1 0x80 -#define AR724X_DDR_REG_FLUSH_USB 0x84 -#define AR724X_DDR_REG_FLUSH_PCIE 0x88 - -#define AR913X_DDR_REG_FLUSH_GE0 0x7c -#define AR913X_DDR_REG_FLUSH_GE1 0x80 -#define AR913X_DDR_REG_FLUSH_USB 0x84 -#define AR913X_DDR_REG_FLUSH_WMAC 0x88 - -#define AR933X_DDR_REG_FLUSH_GE0 0x7c -#define AR933X_DDR_REG_FLUSH_GE1 0x80 -#define AR933X_DDR_REG_FLUSH_USB 0x84 -#define AR933X_DDR_REG_FLUSH_WMAC 0x88 - -#define AR934X_DDR_REG_FLUSH_GE0 0x9c -#define AR934X_DDR_REG_FLUSH_GE1 0xa0 -#define AR934X_DDR_REG_FLUSH_USB 0xa4 -#define AR934X_DDR_REG_FLUSH_PCIE 0xa8 -#define AR934X_DDR_REG_FLUSH_WMAC 0xac - -/* - * PLL block - */ -#define AR71XX_PLL_REG_CPU_CONFIG 0x00 -#define AR71XX_PLL_REG_SEC_CONFIG 0x04 -#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10 -#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14 - -#define AR71XX_PLL_DIV_SHIFT 3 -#define AR71XX_PLL_DIV_MASK 0x1f -#define AR71XX_CPU_DIV_SHIFT 16 -#define AR71XX_CPU_DIV_MASK 0x3 -#define AR71XX_DDR_DIV_SHIFT 18 -#define AR71XX_DDR_DIV_MASK 0x3 -#define AR71XX_AHB_DIV_SHIFT 20 -#define AR71XX_AHB_DIV_MASK 0x7 - -#define AR71XX_ETH0_PLL_SHIFT 17 -#define AR71XX_ETH1_PLL_SHIFT 19 - -#define AR724X_PLL_REG_CPU_CONFIG 0x00 -#define AR724X_PLL_REG_PCIE_CONFIG 0x18 - -#define AR724X_PLL_DIV_SHIFT 0 -#define AR724X_PLL_DIV_MASK 0x3ff -#define AR724X_PLL_REF_DIV_SHIFT 10 -#define AR724X_PLL_REF_DIV_MASK 0xf -#define AR724X_AHB_DIV_SHIFT 19 -#define AR724X_AHB_DIV_MASK 0x1 -#define AR724X_DDR_DIV_SHIFT 22 -#define AR724X_DDR_DIV_MASK 0x3 - -#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c - -#define AR913X_PLL_REG_CPU_CONFIG 0x00 -#define AR913X_PLL_REG_ETH_CONFIG 0x04 -#define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14 -#define AR913X_PLL_REG_ETH1_INT_CLOCK 0x18 - -#define AR913X_PLL_DIV_SHIFT 0 -#define AR913X_PLL_DIV_MASK 0x3ff -#define AR913X_DDR_DIV_SHIFT 22 -#define AR913X_DDR_DIV_MASK 0x3 -#define AR913X_AHB_DIV_SHIFT 19 -#define AR913X_AHB_DIV_MASK 0x1 - -#define AR913X_ETH0_PLL_SHIFT 20 -#define AR913X_ETH1_PLL_SHIFT 22 - -#define AR933X_PLL_CPU_CONFIG_REG 0x00 -#define AR933X_PLL_CLOCK_CTRL_REG 0x08 - -#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10 -#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f -#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16 -#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23 -#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 - -#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2) -#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5 -#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3 -#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10 -#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3 -#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15 -#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7 - -#define AR934X_PLL_CPU_CONFIG_REG 0x00 -#define AR934X_PLL_DDR_CONFIG_REG 0x04 -#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08 -#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c - -#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 -#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT 6 -#define AR934X_PLL_CPU_CONFIG_NINT_MASK 0x3f -#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 -#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 -#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 - -#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 -#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff -#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT 10 -#define AR934X_PLL_DDR_CONFIG_NINT_MASK 0x3f -#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 -#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f -#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 -#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 - -#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT 5 -#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x1f -#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT 10 -#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x1f -#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT 15 -#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x1f -#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -#define QCA955X_PLL_CPU_CONFIG_REG 0x00 -#define QCA955X_PLL_DDR_CONFIG_REG 0x04 -#define QCA955X_PLL_CLK_CTRL_REG 0x08 - -#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 -#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -#define QCA955X_PLL_CPU_CONFIG_NINT_SHIFT 6 -#define QCA955X_PLL_CPU_CONFIG_NINT_MASK 0x3f -#define QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 -#define QCA955X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -#define QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 -#define QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 - -#define QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 -#define QCA955X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff -#define QCA955X_PLL_DDR_CONFIG_NINT_SHIFT 10 -#define QCA955X_PLL_DDR_CONFIG_NINT_MASK 0x3f -#define QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 -#define QCA955X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f -#define QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 -#define QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 - -#define QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -#define QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -#define QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 -#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f -#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 -#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f -#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 -#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f -#define QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) -#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) -#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -/* - * USB_CONFIG block - */ -#define AR71XX_USB_CTRL_REG_FLADJ 0x00 -#define AR71XX_USB_CTRL_REG_CONFIG 0x04 - -/* - * RESET block - */ -#define AR71XX_RESET_REG_TIMER 0x00 -#define AR71XX_RESET_REG_TIMER_RELOAD 0x04 -#define AR71XX_RESET_REG_WDOG_CTRL 0x08 -#define AR71XX_RESET_REG_WDOG 0x0c -#define AR71XX_RESET_REG_MISC_INT_STATUS 0x10 -#define AR71XX_RESET_REG_MISC_INT_ENABLE 0x14 -#define AR71XX_RESET_REG_PCI_INT_STATUS 0x18 -#define AR71XX_RESET_REG_PCI_INT_ENABLE 0x1c -#define AR71XX_RESET_REG_GLOBAL_INT_STATUS 0x20 -#define AR71XX_RESET_REG_RESET_MODULE 0x24 -#define AR71XX_RESET_REG_PERFC_CTRL 0x2c -#define AR71XX_RESET_REG_PERFC0 0x30 -#define AR71XX_RESET_REG_PERFC1 0x34 -#define AR71XX_RESET_REG_REV_ID 0x90 - -#define AR913X_RESET_REG_GLOBAL_INT_STATUS 0x18 -#define AR913X_RESET_REG_RESET_MODULE 0x1c -#define AR913X_RESET_REG_PERF_CTRL 0x20 -#define AR913X_RESET_REG_PERFC0 0x24 -#define AR913X_RESET_REG_PERFC1 0x28 - -#define AR724X_RESET_REG_RESET_MODULE 0x1c - -#define AR933X_RESET_REG_RESET_MODULE 0x1c -#define AR933X_RESET_REG_BOOTSTRAP 0xac - -#define AR934X_RESET_REG_RESET_MODULE 0x1c -#define AR934X_RESET_REG_BOOTSTRAP 0xb0 -#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac - -#define QCA955X_RESET_REG_BOOTSTRAP 0xb0 -#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac - -#define MISC_INT_ETHSW BIT(12) -#define MISC_INT_TIMER4 BIT(10) -#define MISC_INT_TIMER3 BIT(9) -#define MISC_INT_TIMER2 BIT(8) -#define MISC_INT_DMA BIT(7) -#define MISC_INT_OHCI BIT(6) -#define MISC_INT_PERFC BIT(5) -#define MISC_INT_WDOG BIT(4) -#define MISC_INT_UART BIT(3) -#define MISC_INT_GPIO BIT(2) -#define MISC_INT_ERROR BIT(1) -#define MISC_INT_TIMER BIT(0) - -#define AR71XX_RESET_EXTERNAL BIT(28) -#define AR71XX_RESET_FULL_CHIP BIT(24) -#define AR71XX_RESET_CPU_NMI BIT(21) -#define AR71XX_RESET_CPU_COLD BIT(20) -#define AR71XX_RESET_DMA BIT(19) -#define AR71XX_RESET_SLIC BIT(18) -#define AR71XX_RESET_STEREO BIT(17) -#define AR71XX_RESET_DDR BIT(16) -#define AR71XX_RESET_GE1_MAC BIT(13) -#define AR71XX_RESET_GE1_PHY BIT(12) -#define AR71XX_RESET_USBSUS_OVERRIDE BIT(10) -#define AR71XX_RESET_GE0_MAC BIT(9) -#define AR71XX_RESET_GE0_PHY BIT(8) -#define AR71XX_RESET_USB_OHCI_DLL BIT(6) -#define AR71XX_RESET_USB_HOST BIT(5) -#define AR71XX_RESET_USB_PHY BIT(4) -#define AR71XX_RESET_PCI_BUS BIT(1) -#define AR71XX_RESET_PCI_CORE BIT(0) - -#define AR7240_RESET_USB_HOST BIT(5) -#define AR7240_RESET_OHCI_DLL BIT(3) - -#define AR724X_RESET_GE1_MDIO BIT(23) -#define AR724X_RESET_GE0_MDIO BIT(22) -#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10) -#define AR724X_RESET_PCIE_PHY BIT(7) -#define AR724X_RESET_PCIE BIT(6) -#define AR724X_RESET_USB_HOST BIT(5) -#define AR724X_RESET_USB_PHY BIT(4) -#define AR724X_RESET_USBSUS_OVERRIDE BIT(3) - -#define AR913X_RESET_AMBA2WMAC BIT(22) -#define AR913X_RESET_USBSUS_OVERRIDE BIT(10) -#define AR913X_RESET_USB_HOST BIT(5) -#define AR913X_RESET_USB_PHY BIT(4) - -#define AR933X_RESET_GE1_MDIO BIT(23) -#define AR933X_RESET_GE0_MDIO BIT(22) -#define AR933X_RESET_GE1_MAC BIT(13) -#define AR933X_RESET_WMAC BIT(11) -#define AR933X_RESET_GE0_MAC BIT(9) -#define AR933X_RESET_USB_HOST BIT(5) -#define AR933X_RESET_USB_PHY BIT(4) -#define AR933X_RESET_USBSUS_OVERRIDE BIT(3) - -#define AR934X_RESET_HOST BIT(31) -#define AR934X_RESET_SLIC BIT(30) -#define AR934X_RESET_HDMA BIT(29) -#define AR934X_RESET_EXTERNAL BIT(28) -#define AR934X_RESET_RTC BIT(27) -#define AR934X_RESET_PCIE_EP_INT BIT(26) -#define AR934X_RESET_CHKSUM_ACC BIT(25) -#define AR934X_RESET_FULL_CHIP BIT(24) -#define AR934X_RESET_GE1_MDIO BIT(23) -#define AR934X_RESET_GE0_MDIO BIT(22) -#define AR934X_RESET_CPU_NMI BIT(21) -#define AR934X_RESET_CPU_COLD BIT(20) -#define AR934X_RESET_HOST_RESET_INT BIT(19) -#define AR934X_RESET_PCIE_EP BIT(18) -#define AR934X_RESET_UART1 BIT(17) -#define AR934X_RESET_DDR BIT(16) -#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -#define AR934X_RESET_NANDF BIT(14) -#define AR934X_RESET_GE1_MAC BIT(13) -#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) -#define AR934X_RESET_USB_PHY_ANALOG BIT(11) -#define AR934X_RESET_HOST_DMA_INT BIT(10) -#define AR934X_RESET_GE0_MAC BIT(9) -#define AR934X_RESET_ETH_SWITCH BIT(8) -#define AR934X_RESET_PCIE_PHY BIT(7) -#define AR934X_RESET_PCIE BIT(6) -#define AR934X_RESET_USB_HOST BIT(5) -#define AR934X_RESET_USB_PHY BIT(4) -#define AR934X_RESET_USBSUS_OVERRIDE BIT(3) -#define AR934X_RESET_LUT BIT(2) -#define AR934X_RESET_MBOX BIT(1) -#define AR934X_RESET_I2S BIT(0) - -#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) -#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) -#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) - -#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) -#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22) -#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21) -#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20) -#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19) -#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18) -#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17) -#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16) -#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7) -#define AR934X_BOOTSTRAP_PCIE_RC BIT(6) -#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5) -#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4) -#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2) -#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) -#define AR934X_BOOTSTRAP_DDR1 BIT(0) - -#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) - -#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) -#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) -#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) -#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3) -#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4) -#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5) -#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6) -#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7) -#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8) -#define AR934X_PCIE_WMAC_INT_WMAC_ALL \ - (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \ - AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP) - -#define AR934X_PCIE_WMAC_INT_PCIE_ALL \ - (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \ - AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \ - AR934X_PCIE_WMAC_INT_PCIE_RC3) - -#define QCA955X_EXT_INT_WMAC_MISC BIT(0) -#define QCA955X_EXT_INT_WMAC_TX BIT(1) -#define QCA955X_EXT_INT_WMAC_RXLP BIT(2) -#define QCA955X_EXT_INT_WMAC_RXHP BIT(3) -#define QCA955X_EXT_INT_PCIE_RC1 BIT(4) -#define QCA955X_EXT_INT_PCIE_RC1_INT0 BIT(5) -#define QCA955X_EXT_INT_PCIE_RC1_INT1 BIT(6) -#define QCA955X_EXT_INT_PCIE_RC1_INT2 BIT(7) -#define QCA955X_EXT_INT_PCIE_RC1_INT3 BIT(8) -#define QCA955X_EXT_INT_PCIE_RC2 BIT(12) -#define QCA955X_EXT_INT_PCIE_RC2_INT0 BIT(13) -#define QCA955X_EXT_INT_PCIE_RC2_INT1 BIT(14) -#define QCA955X_EXT_INT_PCIE_RC2_INT2 BIT(15) -#define QCA955X_EXT_INT_PCIE_RC2_INT3 BIT(16) -#define QCA955X_EXT_INT_USB1 BIT(24) -#define QCA955X_EXT_INT_USB2 BIT(28) - -#define QCA955X_EXT_INT_WMAC_ALL \ - (QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \ - QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP) - -#define QCA955X_EXT_INT_PCIE_RC1_ALL \ - (QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \ - QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \ - QCA955X_EXT_INT_PCIE_RC1_INT3) - -#define QCA955X_EXT_INT_PCIE_RC2_ALL \ - (QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \ - QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \ - QCA955X_EXT_INT_PCIE_RC2_INT3) - -#define REV_ID_MAJOR_MASK 0xfff0 -#define REV_ID_MAJOR_AR71XX 0x00a0 -#define REV_ID_MAJOR_AR913X 0x00b0 -#define REV_ID_MAJOR_AR7240 0x00c0 -#define REV_ID_MAJOR_AR7241 0x0100 -#define REV_ID_MAJOR_AR7242 0x1100 -#define REV_ID_MAJOR_AR9330 0x0110 -#define REV_ID_MAJOR_AR9331 0x1110 -#define REV_ID_MAJOR_AR9341 0x0120 -#define REV_ID_MAJOR_AR9342 0x1120 -#define REV_ID_MAJOR_AR9344 0x2120 -#define REV_ID_MAJOR_QCA9558 0x1130 - -#define AR71XX_REV_ID_MINOR_MASK 0x3 -#define AR71XX_REV_ID_MINOR_AR7130 0x0 -#define AR71XX_REV_ID_MINOR_AR7141 0x1 -#define AR71XX_REV_ID_MINOR_AR7161 0x2 -#define AR71XX_REV_ID_REVISION_MASK 0x3 -#define AR71XX_REV_ID_REVISION_SHIFT 2 - -#define AR913X_REV_ID_MINOR_MASK 0x3 -#define AR913X_REV_ID_MINOR_AR9130 0x0 -#define AR913X_REV_ID_MINOR_AR9132 0x1 -#define AR913X_REV_ID_REVISION_MASK 0x3 -#define AR913X_REV_ID_REVISION_SHIFT 2 - -#define AR933X_REV_ID_REVISION_MASK 0x3 - -#define AR724X_REV_ID_REVISION_MASK 0x3 - -#define AR934X_REV_ID_REVISION_MASK 0xf - -#define AR944X_REV_ID_REVISION_MASK 0xf - -/* - * SPI block - */ -#define AR71XX_SPI_REG_FS 0x00 /* Function Select */ -#define AR71XX_SPI_REG_CTRL 0x04 /* SPI Control */ -#define AR71XX_SPI_REG_IOC 0x08 /* SPI I/O Control */ -#define AR71XX_SPI_REG_RDS 0x0c /* Read Data Shift */ - -#define AR71XX_SPI_FS_GPIO BIT(0) /* Enable GPIO mode */ - -#define AR71XX_SPI_CTRL_RD BIT(6) /* Remap Disable */ -#define AR71XX_SPI_CTRL_DIV_MASK 0x3f - -#define AR71XX_SPI_IOC_DO BIT(0) /* Data Out pin */ -#define AR71XX_SPI_IOC_CLK BIT(8) /* CLK pin */ -#define AR71XX_SPI_IOC_CS(n) BIT(16 + (n)) -#define AR71XX_SPI_IOC_CS0 AR71XX_SPI_IOC_CS(0) -#define AR71XX_SPI_IOC_CS1 AR71XX_SPI_IOC_CS(1) -#define AR71XX_SPI_IOC_CS2 AR71XX_SPI_IOC_CS(2) -#define AR71XX_SPI_IOC_CS_ALL (AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1 | \ - AR71XX_SPI_IOC_CS2) - -/* - * GPIO block - */ -#define AR71XX_GPIO_REG_OE 0x00 -#define AR71XX_GPIO_REG_IN 0x04 -#define AR71XX_GPIO_REG_OUT 0x08 -#define AR71XX_GPIO_REG_SET 0x0c -#define AR71XX_GPIO_REG_CLEAR 0x10 -#define AR71XX_GPIO_REG_INT_MODE 0x14 -#define AR71XX_GPIO_REG_INT_TYPE 0x18 -#define AR71XX_GPIO_REG_INT_POLARITY 0x1c -#define AR71XX_GPIO_REG_INT_PENDING 0x20 -#define AR71XX_GPIO_REG_INT_ENABLE 0x24 -#define AR71XX_GPIO_REG_FUNC 0x28 - -#define AR934X_GPIO_REG_OUT_FUNC0 0x2c -#define AR934X_GPIO_REG_OUT_FUNC1 0x30 -#define AR934X_GPIO_REG_OUT_FUNC2 0x34 -#define AR934X_GPIO_REG_OUT_FUNC3 0x38 -#define AR934X_GPIO_REG_OUT_FUNC4 0x3c -#define AR934X_GPIO_REG_OUT_FUNC5 0x40 -#define AR934X_GPIO_REG_FUNC 0x6c - -#define AR71XX_GPIO_COUNT 16 -#define AR724X_GPIO_COUNT 18 -#define AR913X_GPIO_COUNT 22 -#define AR933X_GPIO_COUNT 30 -#define AR934X_GPIO_COUNT 23 -#define QCA955X_GPIO_COUNT 24 - -#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) -#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) -#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) -#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) -#define AR71XX_GPIO_FUNC_UART_EN BIT(8) -#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) -#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) - -#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) -#define AR724X_GPIO_FUNC_SPI_EN BIT(18) -#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) -#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) -#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) -#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) -#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -#define AR724X_GPIO_FUNC_UART_EN BIT(1) -#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) - -#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) -#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) -#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) -#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19) -#define AR913X_GPIO_FUNC_I2S1_EN BIT(18) -#define AR913X_GPIO_FUNC_I2S0_EN BIT(17) -#define AR913X_GPIO_FUNC_SLIC_EN BIT(16) -#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9) -#define AR913X_GPIO_FUNC_UART_EN BIT(8) -#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4) - -#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) -#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) -#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) -#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) -#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) -#define AR933X_GPIO_FUNC_SPI_EN BIT(18) -#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -#define AR933X_GPIO_FUNC_UART_EN BIT(1) -#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) - -#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17) -#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14) -#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13) - -#define AR934X_GPIO_OUT_GPIO 0x00 - -/* - * MII_CTRL block - */ -#define AR71XX_MII_REG_MII0_CTRL 0x00 -#define AR71XX_MII_REG_MII1_CTRL 0x04 - -#define AR71XX_MII_CTRL_IF_MASK 3 -#define AR71XX_MII_CTRL_SPEED_SHIFT 4 -#define AR71XX_MII_CTRL_SPEED_MASK 3 -#define AR71XX_MII_CTRL_SPEED_10 0 -#define AR71XX_MII_CTRL_SPEED_100 1 -#define AR71XX_MII_CTRL_SPEED_1000 2 - -#define AR71XX_MII0_CTRL_IF_GMII 0 -#define AR71XX_MII0_CTRL_IF_MII 1 -#define AR71XX_MII0_CTRL_IF_RGMII 2 -#define AR71XX_MII0_CTRL_IF_RMII 3 - -#define AR71XX_MII1_CTRL_IF_RGMII 0 -#define AR71XX_MII1_CTRL_IF_RMII 1 - -/* - * AR933X GMAC interface - */ -#define AR933X_GMAC_REG_ETH_CFG 0x00 - -#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) -#define AR933X_ETH_CFG_MII_GE0 BIT(1) -#define AR933X_ETH_CFG_GMII_GE0 BIT(2) -#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) -#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) -#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) -#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) -#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) -#define AR933X_ETH_CFG_RMII_GE0 BIT(9) -#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 -#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) - -/* - * AR934X GMAC Interface - */ -#define AR934X_GMAC_REG_ETH_CFG 0x00 - -#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) -#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) -#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) -#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) -#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) -#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) -#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) -#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) -#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) -#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) -#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) -#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) -#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) - -/* - * QCA955X GMAC Interface - */ - -#define QCA955X_GMAC_REG_ETH_CFG 0x00 - -#define QCA955X_ETH_CFG_RGMII_GMAC0 BIT(0) -#define QCA955X_ETH_CFG_SGMII_GMAC0 BIT(6) - -#endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/lantiq/image/lzma-loader/src/board-ar71xx.c b/target/linux/lantiq/image/lzma-loader/src/board-ar71xx.c deleted file mode 100644 index 2f4dd6b1f6..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/board-ar71xx.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include "config.h" -#include "ar71xx_regs.h" - -#define READREG(r) *(volatile unsigned int *)(r) -#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v - -#define KSEG1ADDR(_x) (((_x) & 0x1fffffff) | 0xa0000000) - -#define UART_BASE 0xb8020000 - -#define UART_TX 0 -#define UART_LSR 5 - -#define UART_LSR_THRE 0x20 - -#define UART_READ(r) READREG(UART_BASE + 4 * (r)) -#define UART_WRITE(r,v) WRITEREG(UART_BASE + 4 * (r), (v)) - -void board_putc(int ch) -{ - while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0); - UART_WRITE(UART_TX, ch); - while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0); -} - -#ifdef CONFIG_BOARD_TL_WR1043ND_V1 -static void tlwr1043nd_init(void) -{ - unsigned int reg = KSEG1ADDR(AR71XX_RESET_BASE); - unsigned int t; - - t = READREG(reg + AR913X_RESET_REG_RESET_MODULE); - t |= AR71XX_RESET_GE0_PHY; - WRITEREG(reg + AR913X_RESET_REG_RESET_MODULE, t); - /* flush write */ - t = READREG(reg + AR913X_RESET_REG_RESET_MODULE); -} -#else -static inline void tlwr1043nd_init(void) {} -#endif - -void board_init(void) -{ - tlwr1043nd_init(); -} diff --git a/target/linux/lantiq/image/lzma-loader/src/board-lantiq.c b/target/linux/lantiq/image/lzma-loader/src/board-lantiq.c deleted file mode 100644 index b1b4373493..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/board-lantiq.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Arch specific code for Lantiq based boards - * - * Copyright (C) 2013 John Crispin - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include "config.h" - -#define READREG(r) *(volatile unsigned int *)(r) -#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v - -#define UART_BASE 0xbe100c00 -#define ASC_TBUF (UART_BASE | 0x20) -#define ASC_FSTAT (UART_BASE | 0x48) - -#define TXMASK 0x3F00 -#define TXOFFSET 8 - -void board_putc(char c) -{ - while ((READREG(ASC_FSTAT) & TXMASK) >> TXOFFSET); - - WRITEREG(ASC_TBUF, c); -} - -void board_init(void) -{ -} diff --git a/target/linux/lantiq/image/lzma-loader/src/board-ralink.c b/target/linux/lantiq/image/lzma-loader/src/board-ralink.c deleted file mode 100644 index 7c947ec6eb..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/board-ralink.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Arch specific code for Ralink based boards - * - * Copyright (C) 2013 John Crispin - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include "config.h" - -#define READREG(r) *(volatile unsigned int *)(r) -#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v - -#define KSEG1ADDR(_x) (((_x) & 0x1fffffff) | 0xa0000000) - -#ifdef CONFIG_SOC_RT288X -#define UART_BASE 0xb0300c00 -#else -#define UART_BASE 0xb0000c00 -#endif - -#define UART_TX 1 -#define UART_LSR 7 - -#define UART_LSR_THRE 0x20 - -#define UART_READ(r) READREG(UART_BASE + 4 * (r)) -#define UART_WRITE(r,v) WRITEREG(UART_BASE + 4 * (r), (v)) - -void board_putc(int ch) -{ - while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0); - UART_WRITE(UART_TX, ch); - while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0); -} - -void board_init(void) -{ -} diff --git a/target/linux/lantiq/image/lzma-loader/src/cache.c b/target/linux/lantiq/image/lzma-loader/src/cache.c deleted file mode 100644 index 28cc848333..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/cache.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos - * - * The cache manipulation routine has been taken from the U-Boot project. - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include "cache.h" -#include "cacheops.h" -#include "config.h" - -#define cache_op(op,addr) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3\n\t \n" \ - " cache %0, %1 \n" \ - " .set pop \n" \ - : \ - : "i" (op), "R" (*(unsigned char *)(addr))) - -void flush_cache(unsigned long start_addr, unsigned long size) -{ - unsigned long lsize = CONFIG_CACHELINE_SIZE; - unsigned long addr = start_addr & ~(lsize - 1); - unsigned long aend = (start_addr + size - 1) & ~(lsize - 1); - - while (1) { - cache_op(Hit_Writeback_Inv_D, addr); - cache_op(Hit_Invalidate_I, addr); - if (addr == aend) - break; - addr += lsize; - } -} diff --git a/target/linux/lantiq/image/lzma-loader/src/cache.h b/target/linux/lantiq/image/lzma-loader/src/cache.h deleted file mode 100644 index 506a235884..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/cache.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef __CACHE_H -#define __CACHE_H - -void flush_cache(unsigned long start_addr, unsigned long size); - -#endif /* __CACHE_H */ diff --git a/target/linux/lantiq/image/lzma-loader/src/cacheops.h b/target/linux/lantiq/image/lzma-loader/src/cacheops.h deleted file mode 100644 index 70bcad7694..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/cacheops.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Cache operations for the cache instruction. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle - * (C) Copyright 1999 Silicon Graphics, Inc. - */ -#ifndef __ASM_CACHEOPS_H -#define __ASM_CACHEOPS_H - -/* - * Cache Operations available on all MIPS processors with R4000-style caches - */ -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 -#define Index_Load_Tag_I 0x04 -#define Index_Load_Tag_D 0x05 -#define Index_Store_Tag_I 0x08 -#define Index_Store_Tag_D 0x09 -#if defined(CONFIG_CPU_LOONGSON2) -#define Hit_Invalidate_I 0x00 -#else -#define Hit_Invalidate_I 0x10 -#endif -#define Hit_Invalidate_D 0x11 -#define Hit_Writeback_Inv_D 0x15 - -/* - * R4000-specific cacheops - */ -#define Create_Dirty_Excl_D 0x0d -#define Fill 0x14 -#define Hit_Writeback_I 0x18 -#define Hit_Writeback_D 0x19 - -/* - * R4000SC and R4400SC-specific cacheops - */ -#define Index_Invalidate_SI 0x02 -#define Index_Writeback_Inv_SD 0x03 -#define Index_Load_Tag_SI 0x06 -#define Index_Load_Tag_SD 0x07 -#define Index_Store_Tag_SI 0x0A -#define Index_Store_Tag_SD 0x0B -#define Create_Dirty_Excl_SD 0x0f -#define Hit_Invalidate_SI 0x12 -#define Hit_Invalidate_SD 0x13 -#define Hit_Writeback_Inv_SD 0x17 -#define Hit_Writeback_SD 0x1b -#define Hit_Set_Virtual_SI 0x1e -#define Hit_Set_Virtual_SD 0x1f - -/* - * R5000-specific cacheops - */ -#define R5K_Page_Invalidate_S 0x17 - -/* - * RM7000-specific cacheops - */ -#define Page_Invalidate_T 0x16 - -/* - * R10000-specific cacheops - * - * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused. - * Most of the _S cacheops are identical to the R4000SC _SD cacheops. - */ -#define Index_Writeback_Inv_S 0x03 -#define Index_Load_Tag_S 0x07 -#define Index_Store_Tag_S 0x0B -#define Hit_Invalidate_S 0x13 -#define Cache_Barrier 0x14 -#define Hit_Writeback_Inv_S 0x17 -#define Index_Load_Data_I 0x18 -#define Index_Load_Data_D 0x19 -#define Index_Load_Data_S 0x1b -#define Index_Store_Data_I 0x1c -#define Index_Store_Data_D 0x1d -#define Index_Store_Data_S 0x1f - -#endif /* __ASM_CACHEOPS_H */ diff --git a/target/linux/lantiq/image/lzma-loader/src/config.h b/target/linux/lantiq/image/lzma-loader/src/config.h deleted file mode 100644 index b7719e9ca8..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/config.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _CONFIG_H_ -#define _CONFIG_H_ - -#ifndef CONFIG_FLASH_OFFS -#define CONFIG_FLASH_OFFS 0 -#endif - -#ifndef CONFIG_FLASH_MAX -#define CONFIG_FLASH_MAX 0 -#endif - -#ifndef CONFIG_FLASH_STEP -#define CONFIG_FLASH_STEP 0x1000 -#endif - -#endif /* _CONFIG_H_ */ diff --git a/target/linux/lantiq/image/lzma-loader/src/cp0regdef.h b/target/linux/lantiq/image/lzma-loader/src/cp0regdef.h deleted file mode 100644 index c1188ad8c8..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/cp0regdef.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle - * - * Copyright (C) 2001, Monta Vista Software - * Author: jsun@mvista.com or jsun@junsun.net - */ -#ifndef _cp0regdef_h_ -#define _cp0regdef_h_ - -#define CP0_INDEX $0 -#define CP0_RANDOM $1 -#define CP0_ENTRYLO0 $2 -#define CP0_ENTRYLO1 $3 -#define CP0_CONTEXT $4 -#define CP0_PAGEMASK $5 -#define CP0_WIRED $6 -#define CP0_BADVADDR $8 -#define CP0_COUNT $9 -#define CP0_ENTRYHI $10 -#define CP0_COMPARE $11 -#define CP0_STATUS $12 -#define CP0_CAUSE $13 -#define CP0_EPC $14 -#define CP0_PRID $15 -#define CP0_CONFIG $16 -#define CP0_LLADDR $17 -#define CP0_WATCHLO $18 -#define CP0_WATCHHI $19 -#define CP0_XCONTEXT $20 -#define CP0_FRAMEMASK $21 -#define CP0_DIAGNOSTIC $22 -#define CP0_PERFORMANCE $25 -#define CP0_ECC $26 -#define CP0_CACHEERR $27 -#define CP0_TAGLO $28 -#define CP0_TAGHI $29 -#define CP0_ERROREPC $30 - -#endif diff --git a/target/linux/lantiq/image/lzma-loader/src/head.S b/target/linux/lantiq/image/lzma-loader/src/head.S deleted file mode 100644 index 47a7c9bd63..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/head.S +++ /dev/null @@ -1,121 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos - * - * Some parts of this code was based on the OpenWrt specific lzma-loader - * for the BCM47xx and ADM5120 based boards: - * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) - * Copyright (C) 2005 by Oleg I. Vdovikin - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include "cp0regdef.h" -#include "cacheops.h" -#include "config.h" - -#define KSEG0 0x80000000 - - .macro ehb - sll zero, 3 - .endm - - .text - -LEAF(startup) - .set noreorder - .set mips32 - - mtc0 zero, CP0_WATCHLO # clear watch registers - mtc0 zero, CP0_WATCHHI - mtc0 zero, CP0_CAUSE # clear before writing status register - - mfc0 t0, CP0_STATUS - li t1, 0x1000001f - or t0, t1 - xori t0, 0x1f - mtc0 t0, CP0_STATUS - ehb - - mtc0 zero, CP0_COUNT - mtc0 zero, CP0_COMPARE - ehb - - la t0, __reloc_label # get linked address of label - bal __reloc_label # branch and link to label to - nop # get actual address -__reloc_label: - subu t0, ra, t0 # get reloc_delta - - beqz t0, __reloc_done # if delta is 0 we are in the right place - nop - - /* Copy our code to the right place */ - la t1, _code_start # get linked address of _code_start - la t2, _code_end # get linked address of _code_end - addu t0, t0, t1 # calculate actual address of _code_start - -__reloc_copy: - lw t3, 0(t0) - sw t3, 0(t1) - add t1, 4 - blt t1, t2, __reloc_copy - add t0, 4 - - /* flush cache */ - la t0, _code_start - la t1, _code_end - - li t2, ~(CONFIG_CACHELINE_SIZE - 1) - and t0, t2 - and t1, t2 - li t2, CONFIG_CACHELINE_SIZE - - b __flush_check - nop - -__flush_line: - cache Hit_Writeback_Inv_D, 0(t0) - cache Hit_Invalidate_I, 0(t0) - add t0, t2 - -__flush_check: - bne t0, t1, __flush_line - nop - - sync - -__reloc_done: - - /* clear bss */ - la t0, _bss_start - la t1, _bss_end - b __bss_check - nop - -__bss_fill: - sw zero, 0(t0) - addi t0, 4 - -__bss_check: - bne t0, t1, __bss_fill - nop - - /* Setup new "C" stack */ - la sp, _stack - - /* reserve stack space for a0-a3 registers */ - subu sp, 16 - - /* jump to the decompressor routine */ - la t0, loader_main - jr t0 - nop - - .set reorder -END(startup) diff --git a/target/linux/lantiq/image/lzma-loader/src/lantiq.mk b/target/linux/lantiq/image/lzma-loader/src/lantiq.mk deleted file mode 100644 index 413764593b..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/lantiq.mk +++ /dev/null @@ -1 +0,0 @@ -CACHE_FLAGS+=-DCONFIG_ICACHE_SIZE="(32 * 1024)" -DCONFIG_DCACHE_SIZE="(32 * 1024)" -DCONFIG_CACHELINE_SIZE=32 diff --git a/target/linux/lantiq/image/lzma-loader/src/loader.c b/target/linux/lantiq/image/lzma-loader/src/loader.c deleted file mode 100644 index 1d42bfa2f7..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/loader.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos - * - * Some parts of this code was based on the OpenWrt specific lzma-loader - * for the BCM47xx and ADM5120 based boards: - * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) - * Copyright (C) 2005 Mineharu Takahara - * Copyright (C) 2005 by Oleg I. Vdovikin - * - * The image_header structure has been taken from the U-Boot project. - * (C) Copyright 2008 Semihalf - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include - -#include "config.h" -#include "cache.h" -#include "printf.h" -#include "LzmaDecode.h" - -#define AR71XX_FLASH_START 0x1f000000 -#define AR71XX_FLASH_END 0x1fe00000 - -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 - -#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) - -#undef LZMA_DEBUG - -#ifdef LZMA_DEBUG -# define DBG(f, a...) printf(f, ## a) -#else -# define DBG(f, a...) do {} while (0) -#endif - -#define IH_MAGIC_OKLI 0x4f4b4c49 /* 'OKLI' */ - -#define IH_NMLEN 32 /* Image Name Length */ - -typedef struct image_header { - uint32_t ih_magic; /* Image Header Magic Number */ - uint32_t ih_hcrc; /* Image Header CRC Checksum */ - uint32_t ih_time; /* Image Creation Timestamp */ - uint32_t ih_size; /* Image Data Size */ - uint32_t ih_load; /* Data Load Address */ - uint32_t ih_ep; /* Entry Point Address */ - uint32_t ih_dcrc; /* Image Data CRC Checksum */ - uint8_t ih_os; /* Operating System */ - uint8_t ih_arch; /* CPU architecture */ - uint8_t ih_type; /* Image Type */ - uint8_t ih_comp; /* Compression Type */ - uint8_t ih_name[IH_NMLEN]; /* Image Name */ -} image_header_t; - -/* beyond the image end, size not known in advance */ -extern unsigned char workspace[]; -extern void board_init(void); - -static CLzmaDecoderState lzma_state; -static unsigned char *lzma_data; -static unsigned long lzma_datasize; -static unsigned long lzma_outsize; -static unsigned long kernel_la; - -#ifdef CONFIG_KERNEL_CMDLINE -#define kernel_argc 1 -static const char kernel_cmdline[] = CONFIG_KERNEL_CMDLINE; -static const char *kernel_argv[] = { - kernel_cmdline, - NULL, -}; -#endif /* CONFIG_KERNEL_CMDLINE */ - -static void halt(void) -{ - printf("\nSystem halted!\n"); - for(;;); -} - -static __inline__ unsigned long get_be32(void *buf) -{ - unsigned char *p = buf; - - return (((unsigned long) p[0] << 24) + - ((unsigned long) p[1] << 16) + - ((unsigned long) p[2] << 8) + - (unsigned long) p[3]); -} - -static __inline__ unsigned char lzma_get_byte(void) -{ - unsigned char c; - - lzma_datasize--; - c = *lzma_data++; - - return c; -} - -static int lzma_init_props(void) -{ - unsigned char props[LZMA_PROPERTIES_SIZE]; - int res; - int i; - - /* read lzma properties */ - for (i = 0; i < LZMA_PROPERTIES_SIZE; i++) - props[i] = lzma_get_byte(); - - /* read the lower half of uncompressed size in the header */ - lzma_outsize = ((SizeT) lzma_get_byte()) + - ((SizeT) lzma_get_byte() << 8) + - ((SizeT) lzma_get_byte() << 16) + - ((SizeT) lzma_get_byte() << 24); - - /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) - lzma_get_byte(); - - res = LzmaDecodeProperties(&lzma_state.Properties, props, - LZMA_PROPERTIES_SIZE); - return res; -} - -static int lzma_decompress(unsigned char *outStream) -{ - SizeT ip, op; - int ret; - - lzma_state.Probs = (CProb *) workspace; - - ret = LzmaDecode(&lzma_state, lzma_data, lzma_datasize, &ip, outStream, - lzma_outsize, &op); - - if (ret != LZMA_RESULT_OK) { - int i; - - DBG("LzmaDecode error %d at %08x, osize:%d ip:%d op:%d\n", - ret, lzma_data + ip, lzma_outsize, ip, op); - - for (i = 0; i < 16; i++) - DBG("%02x ", lzma_data[ip + i]); - - DBG("\n"); - } - - return ret; -} - -#if (LZMA_WRAPPER) -static void lzma_init_data(void) -{ - extern unsigned char _lzma_data_start[]; - extern unsigned char _lzma_data_end[]; - - kernel_la = LOADADDR; - lzma_data = _lzma_data_start; - lzma_datasize = _lzma_data_end - _lzma_data_start; -} -#else -static void lzma_init_data(void) -{ - struct image_header *hdr = NULL; - unsigned char *flash_base; - unsigned long flash_ofs; - unsigned long kernel_ofs; - unsigned long kernel_size; - - flash_base = (unsigned char *) KSEG1ADDR(AR71XX_FLASH_START); - - printf("Looking for OpenWrt image... "); - - for (flash_ofs = CONFIG_FLASH_OFFS; - flash_ofs <= (CONFIG_FLASH_OFFS + CONFIG_FLASH_MAX); - flash_ofs += CONFIG_FLASH_STEP) { - unsigned long magic; - unsigned char *p; - - p = flash_base + flash_ofs; - magic = get_be32(p); - if (magic == IH_MAGIC_OKLI) { - hdr = (struct image_header *) p; - break; - } - } - - if (hdr == NULL) { - printf("not found!\n"); - halt(); - } - - printf("found at 0x%08x\n", flash_base + flash_ofs); - - kernel_ofs = sizeof(struct image_header); - kernel_size = get_be32(&hdr->ih_size); - kernel_la = get_be32(&hdr->ih_load); - - lzma_data = flash_base + flash_ofs + kernel_ofs; - lzma_datasize = kernel_size; -} -#endif /* (LZMA_WRAPPER) */ - -void loader_main(unsigned long reg_a0, unsigned long reg_a1, - unsigned long reg_a2, unsigned long reg_a3) -{ - void (*kernel_entry) (unsigned long, unsigned long, unsigned long, - unsigned long); - int res; - - board_init(); - - printf("\n\nOpenWrt kernel loader for MIPS based SoC\n"); - printf("Copyright (C) 2011 Gabor Juhos \n"); - - lzma_init_data(); - - res = lzma_init_props(); - if (res != LZMA_RESULT_OK) { - printf("Incorrect LZMA stream properties!\n"); - halt(); - } - - printf("Decompressing kernel... "); - - res = lzma_decompress((unsigned char *) kernel_la); - if (res != LZMA_RESULT_OK) { - printf("failed, "); - switch (res) { - case LZMA_RESULT_DATA_ERROR: - printf("data error!\n"); - break; - default: - printf("unknown error %d!\n", res); - } - halt(); - } else { - printf("done!\n"); - } - - flush_cache(kernel_la, lzma_outsize); - - printf("Starting kernel at %08x...\n\n", kernel_la); - -#ifdef CONFIG_KERNEL_CMDLINE - reg_a0 = kernel_argc; - reg_a1 = (unsigned long) kernel_argv; - reg_a2 = 0; - reg_a3 = 0; -#endif - - kernel_entry = (void *) kernel_la; - kernel_entry(reg_a0, reg_a1, reg_a2, reg_a3); -} diff --git a/target/linux/lantiq/image/lzma-loader/src/loader.lds b/target/linux/lantiq/image/lzma-loader/src/loader.lds deleted file mode 100644 index 80cc7ca3ec..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/loader.lds +++ /dev/null @@ -1,35 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .text : { - _code_start = .; - *(.text) - *(.text.*) - *(.rodata) - *(.rodata.*) - *(.data.lzma) - } - - . = ALIGN(32); - .data : { - *(.data) - *(.data.*) - . = . + 524288; /* workaround for buggy bootloaders */ - } - - . = ALIGN(32); - _code_end = .; - - _bss_start = .; - .bss : { - *(.bss) - *(.bss.*) - } - - . = ALIGN(32); - _bss_end = .; - - . = . + 8192; - _stack = .; - - workspace = .; -} diff --git a/target/linux/lantiq/image/lzma-loader/src/loader2.lds b/target/linux/lantiq/image/lzma-loader/src/loader2.lds deleted file mode 100644 index db0bb46424..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/loader2.lds +++ /dev/null @@ -1,10 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .text : { - startup = .; - *(.text) - *(.text.*) - *(.data) - *(.data.*) - } -} diff --git a/target/linux/lantiq/image/lzma-loader/src/lzma-data.lds b/target/linux/lantiq/image/lzma-loader/src/lzma-data.lds deleted file mode 100644 index abf756ba13..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/lzma-data.lds +++ /dev/null @@ -1,8 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .data.lzma : { - _lzma_data_start = .; - *(.data) - _lzma_data_end = .; - } -} diff --git a/target/linux/lantiq/image/lzma-loader/src/printf.c b/target/linux/lantiq/image/lzma-loader/src/printf.c deleted file mode 100644 index 7bb5a86e18..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/printf.c +++ /dev/null @@ -1,350 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include "printf.h" - -extern void board_putc(int ch); - -/* this is the maximum width for a variable */ -#define LP_MAX_BUF 256 - -/* macros */ -#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') ) -#define Ctod(x) ( (x) - '0') - -/* forward declaration */ -static int PrintChar(char *, char, int, int); -static int PrintString(char *, char *, int, int); -static int PrintNum(char *, unsigned long, int, int, int, int, char, int); - -/* private variable */ -static const char theFatalMsg[] = "fatal error in lp_Print!"; - -/* -*- - * A low level printf() function. - */ -static void -lp_Print(void (*output)(void *, char *, int), - void * arg, - char *fmt, - va_list ap) -{ - -#define OUTPUT(arg, s, l) \ - { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \ - (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \ - } else { \ - (*output)(arg, s, l); \ - } \ - } - - char buf[LP_MAX_BUF]; - - char c; - char *s; - long int num; - - int longFlag; - int negFlag; - int width; - int prec; - int ladjust; - char padc; - - int length; - - for(;;) { - { - /* scan for the next '%' */ - char *fmtStart = fmt; - while ( (*fmt != '\0') && (*fmt != '%')) { - fmt ++; - } - - /* flush the string found so far */ - OUTPUT(arg, fmtStart, fmt-fmtStart); - - /* are we hitting the end? */ - if (*fmt == '\0') break; - } - - /* we found a '%' */ - fmt ++; - - /* check for long */ - if (*fmt == 'l') { - longFlag = 1; - fmt ++; - } else { - longFlag = 0; - } - - /* check for other prefixes */ - width = 0; - prec = -1; - ladjust = 0; - padc = ' '; - - if (*fmt == '-') { - ladjust = 1; - fmt ++; - } - - if (*fmt == '0') { - padc = '0'; - fmt++; - } - - if (IsDigit(*fmt)) { - while (IsDigit(*fmt)) { - width = 10 * width + Ctod(*fmt++); - } - } - - if (*fmt == '.') { - fmt ++; - if (IsDigit(*fmt)) { - prec = 0; - while (IsDigit(*fmt)) { - prec = prec*10 + Ctod(*fmt++); - } - } - } - - - /* check format flag */ - negFlag = 0; - switch (*fmt) { - case 'b': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'd': - case 'D': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - if (num < 0) { - num = - num; - negFlag = 1; - } - length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'o': - case 'O': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'u': - case 'U': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'x': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'X': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1); - OUTPUT(arg, buf, length); - break; - - case 'c': - c = (char)va_arg(ap, int); - length = PrintChar(buf, c, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case 's': - s = (char*)va_arg(ap, char *); - length = PrintString(buf, s, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case '\0': - fmt --; - break; - - default: - /* output this char as it is */ - OUTPUT(arg, fmt, 1); - } /* switch (*fmt) */ - - fmt ++; - } /* for(;;) */ - - /* special termination call */ - OUTPUT(arg, "\0", 1); -} - - -/* --------------- local help functions --------------------- */ -static int -PrintChar(char * buf, char c, int length, int ladjust) -{ - int i; - - if (length < 1) length = 1; - if (ladjust) { - *buf = c; - for (i=1; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-1; i++) buf[i] = ' '; - buf[length - 1] = c; - } - return length; -} - -static int -PrintString(char * buf, char* s, int length, int ladjust) -{ - int i; - int len=0; - char* s1 = s; - while (*s1++) len++; - if (length < len) length = len; - - if (ladjust) { - for (i=0; i< len; i++) buf[i] = s[i]; - for (i=len; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-len; i++) buf[i] = ' '; - for (i=length-len; i < length; i++) buf[i] = s[i-length+len]; - } - return length; -} - -static int -PrintNum(char * buf, unsigned long u, int base, int negFlag, - int length, int ladjust, char padc, int upcase) -{ - /* algorithm : - * 1. prints the number from left to right in reverse form. - * 2. fill the remaining spaces with padc if length is longer than - * the actual length - * TRICKY : if left adjusted, no "0" padding. - * if negtive, insert "0" padding between "0" and number. - * 3. if (!ladjust) we reverse the whole string including paddings - * 4. otherwise we only reverse the actual string representing the num. - */ - - int actualLength =0; - char *p = buf; - int i; - - do { - int tmp = u %base; - if (tmp <= 9) { - *p++ = '0' + tmp; - } else if (upcase) { - *p++ = 'A' + tmp - 10; - } else { - *p++ = 'a' + tmp - 10; - } - u /= base; - } while (u != 0); - - if (negFlag) { - *p++ = '-'; - } - - /* figure out actual length and adjust the maximum length */ - actualLength = p - buf; - if (length < actualLength) length = actualLength; - - /* add padding */ - if (ladjust) { - padc = ' '; - } - if (negFlag && !ladjust && (padc == '0')) { - for (i = actualLength-1; i< length-1; i++) buf[i] = padc; - buf[length -1] = '-'; - } else { - for (i = actualLength; i< length; i++) buf[i] = padc; - } - - - /* prepare to reverse the string */ - { - int begin = 0; - int end; - if (ladjust) { - end = actualLength - 1; - } else { - end = length -1; - } - - while (end > begin) { - char tmp = buf[begin]; - buf[begin] = buf[end]; - buf[end] = tmp; - begin ++; - end --; - } - } - - /* adjust the string pointer */ - return length; -} - -static void printf_output(void *arg, char *s, int l) -{ - int i; - - // special termination call - if ((l==1) && (s[0] == '\0')) return; - - for (i=0; i< l; i++) { - board_putc(s[i]); - if (s[i] == '\n') board_putc('\r'); - } -} - -void printf(char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - lp_Print(printf_output, 0, fmt, ap); - va_end(ap); -} diff --git a/target/linux/lantiq/image/lzma-loader/src/printf.h b/target/linux/lantiq/image/lzma-loader/src/printf.h deleted file mode 100644 index 9b1c1df232..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/printf.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _printf_h_ -#define _printf_h_ - -#include -void printf(char *fmt, ...); - -#endif /* _printf_h_ */ diff --git a/target/linux/lantiq/image/lzma-loader/src/ralink.mk b/target/linux/lantiq/image/lzma-loader/src/ralink.mk deleted file mode 100644 index 3ff5fddf98..0000000000 --- a/target/linux/lantiq/image/lzma-loader/src/ralink.mk +++ /dev/null @@ -1 +0,0 @@ -CACHE_FLAGS+=-DCONFIG_ICACHE_SIZE="(32 * 1024)" -DCONFIG_DCACHE_SIZE="(16 * 1024)" -DCONFIG_CACHELINE_SIZE=32 -- 2.30.2