From 1f786257147f978ce4c5750fdc404851453fafcb Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Sat, 12 May 2018 12:57:47 -0700 Subject: [PATCH] ramips: remove conditional compilation. Code currently defines: and then compiles code only if they are defined. We might want to disable some of these via devicetree one day, but for now just remove the #defines and the conditions - all the code for different ports is easy to identify. Signed-off-by: NeilBrown Signed-off-by: Greg Kroah-Hartman --- .../files-4.14/arch/mips/pci/pci-mt7621.c | 66 +++---------------- 1 file changed, 8 insertions(+), 58 deletions(-) diff --git a/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c b/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c index 80f9cc2080..2d4cc65ccf 100644 --- a/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c +++ b/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c @@ -65,9 +65,6 @@ extern void chk_phy_pll(void); * devices. */ -#define CONFIG_PCIE_PORT0 -#define CONFIG_PCIE_PORT1 -#define CONFIG_PCIE_PORT2 #define RALINK_PCIE0_CLK_EN (1<<24) #define RALINK_PCIE1_CLK_EN (1<<25) #define RALINK_PCIE2_CLK_EN (1<<26) @@ -144,7 +141,7 @@ extern void chk_phy_pll(void); #define RALINK_PCI_IO_MAP_BASE 0x1e160000 #define RALINK_SYSTEM_CONTROL_BASE 0xbe000000 -#define GPIO_PERST + #define ASSERT_SYSRST_PCIE(val) do { \ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \ RALINK_RSTCTRL |= val; \ @@ -397,21 +394,15 @@ set_pcie_phy(u32 *addr, int start_b, int bits, int val) void bypass_pipe_rst(void) { -#if defined (CONFIG_PCIE_PORT0) /* PCIe Port 0 */ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4] -#endif -#if defined (CONFIG_PCIE_PORT1) /* PCIe Port 1 */ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01); // rg_pe1_pipe_rst_b set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4] -#endif -#if defined (CONFIG_PCIE_PORT2) /* PCIe Port 2 */ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4] -#endif } void @@ -420,7 +411,6 @@ set_phy_for_ssc(void) unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10)); reg = (reg >> 6) & 0x7; -#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1) /* Set PCIe Port0 & Port1 PHY to disable SSC */ /* Debug Xtal Type */ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type @@ -461,8 +451,7 @@ set_phy_for_ssc(void) set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x01); // rg_pe1_phy_en //Port 1 enable set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 1 disable control -#endif -#if defined (CONFIG_PCIE_PORT2) + /* Set PCIe Port2 PHY to disable SSC */ /* Debug Xtal Type */ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type @@ -495,7 +484,6 @@ set_phy_for_ssc(void) /* Enable PHY and disable force mode */ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control -#endif } void setup_cm_memory_region(struct resource *mem_resource) @@ -528,18 +516,13 @@ static int mt7621_pci_probe(struct platform_device *pdev) ioport_resource.start= 0; ioport_resource.end = ~0; -#if defined (CONFIG_PCIE_PORT0) val = RALINK_PCIE0_RST; -#endif -#if defined (CONFIG_PCIE_PORT1) val |= RALINK_PCIE1_RST; -#endif -#if defined (CONFIG_PCIE_PORT2) val |= RALINK_PCIE2_RST; -#endif + ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST); printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL); -#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/ + *(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3); *(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3; mdelay(100); @@ -548,18 +531,11 @@ static int mt7621_pci_probe(struct platform_device *pdev) *(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7); // clear DATA mdelay(100); -#else - *(unsigned int *)(0xbe000060) &= ~0x00000c00; -#endif -#if defined (CONFIG_PCIE_PORT0) + val = RALINK_PCIE0_RST; -#endif -#if defined (CONFIG_PCIE_PORT1) val |= RALINK_PCIE1_RST; -#endif -#if defined (CONFIG_PCIE_PORT2) val |= RALINK_PCIE2_RST; -#endif + DEASSERT_SYSRST_PCIE(val); printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL); @@ -568,18 +544,12 @@ static int mt7621_pci_probe(struct platform_device *pdev) set_phy_for_ssc(); printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL); -#if defined (CONFIG_PCIE_PORT0) read_config(0, 0, 0, 0x70c, &val); printk("Port 0 N_FTS = %x\n", (unsigned int)val); -#endif -#if defined (CONFIG_PCIE_PORT1) read_config(0, 1, 0, 0x70c, &val); printk("Port 1 N_FTS = %x\n", (unsigned int)val); -#endif -#if defined (CONFIG_PCIE_PORT2) read_config(0, 2, 0, 0x70c, &val); printk("Port 2 N_FTS = %x\n", (unsigned int)val); -#endif RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST); RALINK_SYSCFG1 &= ~(0x30); @@ -590,19 +560,11 @@ static int mt7621_pci_probe(struct platform_device *pdev) RALINK_PCIE_CLK_GEN |= 0x80000000; mdelay(50); RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST); - -#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/ + /* Use GPIO control instead of PERST_N */ *(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // set DATA - mdelay(100); -#else - RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST -#endif - mdelay(500); + mdelay(1000); - - mdelay(500); -#if defined (CONFIG_PCIE_PORT0) if(( RALINK_PCI0_STATUS & 0x1) == 0) { printk("PCIE0 no card, disable it(RST&CLK)\n"); @@ -613,8 +575,6 @@ static int mt7621_pci_probe(struct platform_device *pdev) pcie_link_status |= 1<<0; RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt } -#endif -#if defined (CONFIG_PCIE_PORT1) if(( RALINK_PCI1_STATUS & 0x1) == 0) { printk("PCIE1 no card, disable it(RST&CLK)\n"); @@ -625,8 +585,6 @@ static int mt7621_pci_probe(struct platform_device *pdev) pcie_link_status |= 1<<1; RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt } -#endif -#if defined (CONFIG_PCIE_PORT2) if (( RALINK_PCI2_STATUS & 0x1) == 0) { printk("PCIE2 no card, disable it(RST&CLK)\n"); ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST); @@ -636,7 +594,6 @@ static int mt7621_pci_probe(struct platform_device *pdev) pcie_link_status |= 1<<2; RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt } -#endif if (pcie_link_status == 0) return 0; @@ -687,7 +644,6 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE; RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE; -#if defined (CONFIG_PCIE_PORT0) //PCIe0 if((pcie_link_status & 0x1) != 0) { RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE @@ -695,8 +651,6 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num RALINK_PCI0_CLASS = 0x06040001; printk("PCIE0 enabled\n"); } -#endif -#if defined (CONFIG_PCIE_PORT1) //PCIe1 if ((pcie_link_status & 0x2) != 0) { RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE @@ -704,8 +658,6 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num RALINK_PCI1_CLASS = 0x06040001; printk("PCIE1 enabled\n"); } -#endif -#if defined (CONFIG_PCIE_PORT2) //PCIe2 if ((pcie_link_status & 0x4) != 0) { RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE @@ -713,8 +665,6 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num RALINK_PCI2_CLASS = 0x06040001; printk("PCIE2 enabled\n"); } -#endif - switch(pcie_link_status) { case 7: -- 2.30.2