From 1f594b64a4f74ece0b7166ca4db05a71a64bd685 Mon Sep 17 00:00:00 2001 From: Jim Lin Date: Sun, 17 Apr 2011 11:58:25 +0300 Subject: [PATCH] USB: ehci: tegra: fix USB1 port reset issue Tegra USB1 port needs to issue Port Reset twice internally, otherwise it fails to enumerate devices attached to it Signed-off-by: Jim Lin Signed-off-by: Olof Johansson [ squash two patches into one and minor style cleanups ] Signed-off-by: Mike Rapoport Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 72 +++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index a516af28c29b..7359bcbe4176 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -58,6 +58,71 @@ static void tegra_ehci_power_down(struct usb_hcd *hcd) clk_disable(tegra->emc_clk); } +static int tegra_ehci_internal_port_reset( + struct ehci_hcd *ehci, + u32 __iomem *portsc_reg +) +{ + u32 temp; + unsigned long flags; + int retval = 0; + int i, tries; + u32 saved_usbintr; + + spin_lock_irqsave(&ehci->lock, flags); + saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable); + /* disable USB interrupt */ + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + spin_unlock_irqrestore(&ehci->lock, flags); + + /* + * Here we have to do Port Reset at most twice for + * Port Enable bit to be set. + */ + for (i = 0; i < 2; i++) { + temp = ehci_readl(ehci, portsc_reg); + temp |= PORT_RESET; + ehci_writel(ehci, temp, portsc_reg); + mdelay(10); + temp &= ~PORT_RESET; + ehci_writel(ehci, temp, portsc_reg); + mdelay(1); + tries = 100; + do { + mdelay(1); + /* + * Up to this point, Port Enable bit is + * expected to be set after 2 ms waiting. + * USB1 usually takes extra 45 ms, for safety, + * we take 100 ms as timeout. + */ + temp = ehci_readl(ehci, portsc_reg); + } while (!(temp & PORT_PE) && tries--); + if (temp & PORT_PE) + break; + } + if (i == 2) + retval = -ETIMEDOUT; + + /* + * Clear Connect Status Change bit if it's set. + * We can't clear PORT_PEC. It will also cause PORT_PE to be cleared. + */ + if (temp & PORT_CSC) + ehci_writel(ehci, PORT_CSC, portsc_reg); + + /* + * Write to clear any interrupt status bits that might be set + * during port reset. + */ + temp = ehci_readl(ehci, &ehci->regs->status); + ehci_writel(ehci, temp, &ehci->regs->status); + + /* restore original interrupt enable bits */ + ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable); + return retval; +} + static int tegra_ehci_hub_control( struct usb_hcd *hcd, u16 typeReq, @@ -121,6 +186,13 @@ static int tegra_ehci_hub_control( goto done; } + /* For USB1 port we need to issue Port Reset twice internally */ + if (tegra->phy->instance == 0 && + (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_RESET)) { + spin_unlock_irqrestore(&ehci->lock, flags); + return tegra_ehci_internal_port_reset(ehci, status_reg); + } + /* * Tegra host controller will time the resume operation to clear the bit * when the port control state switches to HS or FS Idle. This behavior -- 2.30.2