From 1ec0ed083988ae433305d7f4158fda8c3a1a23b9 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Thu, 17 May 2012 17:50:45 -0300 Subject: [PATCH] [media] v4l: Remove "_ACTUAL" from subdev selection API target definition names The string "_ACTUAL" does not say anything more about the target names. Drop it. V4L2 selection API was changed by "V4L: Remove "_ACTIVE" from the selection target name definitions" by Sylwester Nawrocki. This patch does the same for the V4L2 subdev API. Signed-off-by: Sakari Ailus Acked-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- .../DocBook/media/v4l/dev-subdev.xml | 28 +++++++++---------- .../media/v4l/vidioc-subdev-g-selection.xml | 12 ++++---- drivers/media/video/omap3isp/ispccdc.c | 4 +-- drivers/media/video/omap3isp/isppreview.c | 4 +-- drivers/media/video/omap3isp/ispresizer.c | 4 +-- drivers/media/video/smiapp/smiapp-core.c | 22 +++++++-------- drivers/media/video/v4l2-subdev.c | 4 +-- include/linux/v4l2-subdev.h | 9 ++++-- 8 files changed, 46 insertions(+), 41 deletions(-) diff --git a/Documentation/DocBook/media/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml index 4afcbbec5eda..e88d5ea8f826 100644 --- a/Documentation/DocBook/media/v4l/dev-subdev.xml +++ b/Documentation/DocBook/media/v4l/dev-subdev.xml @@ -289,9 +289,9 @@ &v4l2-rect; by the coordinates of the top left corner and the rectangle size. Both the coordinates and sizes are expressed in pixels. - As for pad formats, drivers store try and active - rectangles for the selection targets of ACTUAL type . + As for pad formats, drivers store try and active rectangles for + the selection targets . On sink pads, cropping is applied relative to the current pad format. The pad format represents the image size as @@ -308,7 +308,7 @@ Scaling support is optional. When supported by a subdev, the crop rectangle on the subdev's sink pad is scaled to the size configured using the &VIDIOC-SUBDEV-S-SELECTION; IOCTL - using V4L2_SUBDEV_SEL_COMPOSE_ACTUAL + using V4L2_SUBDEV_SEL_TGT_COMPOSE selection target on the same pad. If the subdev supports scaling but not composing, the top and left values are not used and must always be set to zero. @@ -333,22 +333,22 @@ Types of selection targets
- ACTUAL targets + Actual targets - ACTUAL targets reflect the actual hardware configuration - at any point of time. There is a BOUNDS target - corresponding to every ACTUAL. + Actual targets (without a postfix) reflect the actual + hardware configuration at any point of time. There is a BOUNDS + target corresponding to every actual target.
BOUNDS targets - BOUNDS targets is the smallest rectangle that contains - all valid ACTUAL rectangles. It may not be possible to set the - ACTUAL rectangle as large as the BOUNDS rectangle, however. - This may be because e.g. a sensor's pixel array is not - rectangular but cross-shaped or round. The maximum size may - also be smaller than the BOUNDS rectangle. + BOUNDS targets is the smallest rectangle that contains all + valid actual rectangles. It may not be possible to set the actual + rectangle as large as the BOUNDS rectangle, however. This may be + because e.g. a sensor's pixel array is not rectangular but + cross-shaped or round. The maximum size may also be smaller than the + BOUNDS rectangle.
diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml index 208e9f0da3f3..4c44808ab25c 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml @@ -72,10 +72,10 @@
Types of selection targets - There are two types of selection targets: actual and bounds. - The ACTUAL targets are the targets which configure the hardware. - The BOUNDS target will return a rectangle that contain all - possible ACTUAL rectangles. + There are two types of selection targets: actual and bounds. The + actual targets are the targets which configure the hardware. The BOUNDS + target will return a rectangle that contain all possible actual + rectangles.
@@ -93,7 +93,7 @@ &cs-def; - V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL + V4L2_SUBDEV_SEL_TGT_CROP 0x0000 Actual crop. Defines the cropping performed by the processing step. @@ -104,7 +104,7 @@ Bounds of the crop rectangle. - V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL + V4L2_SUBDEV_SEL_TGT_COMPOSE 0x0100 Actual compose rectangle. Used to configure scaling on sink pads and composition on source pads. diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c index 7e32331b60fb..f19774f8396a 100644 --- a/drivers/media/video/omap3isp/ispccdc.c +++ b/drivers/media/video/omap3isp/ispccdc.c @@ -2024,7 +2024,7 @@ static int ccdc_get_selection(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, ccdc_try_crop(ccdc, format, &sel->r); break; - case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL: + case V4L2_SUBDEV_SEL_TGT_CROP: sel->r = *__ccdc_get_crop(ccdc, fh, sel->which); break; @@ -2052,7 +2052,7 @@ static int ccdc_set_selection(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd); struct v4l2_mbus_framefmt *format; - if (sel->target != V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL || + if (sel->target != V4L2_SUBDEV_SEL_TGT_CROP || sel->pad != CCDC_PAD_SOURCE_OF) return -EINVAL; diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c index 8a4935ecc655..1086f6a9ff76 100644 --- a/drivers/media/video/omap3isp/isppreview.c +++ b/drivers/media/video/omap3isp/isppreview.c @@ -1960,7 +1960,7 @@ static int preview_get_selection(struct v4l2_subdev *sd, preview_try_crop(prev, format, &sel->r); break; - case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL: + case V4L2_SUBDEV_SEL_TGT_CROP: sel->r = *__preview_get_crop(prev, fh, sel->which); break; @@ -1988,7 +1988,7 @@ static int preview_set_selection(struct v4l2_subdev *sd, struct isp_prev_device *prev = v4l2_get_subdevdata(sd); struct v4l2_mbus_framefmt *format; - if (sel->target != V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL || + if (sel->target != V4L2_SUBDEV_SEL_TGT_CROP || sel->pad != PREV_PAD_SINK) return -EINVAL; diff --git a/drivers/media/video/omap3isp/ispresizer.c b/drivers/media/video/omap3isp/ispresizer.c index 14041c9c8643..945665295571 100644 --- a/drivers/media/video/omap3isp/ispresizer.c +++ b/drivers/media/video/omap3isp/ispresizer.c @@ -1259,7 +1259,7 @@ static int resizer_get_selection(struct v4l2_subdev *sd, resizer_calc_ratios(res, &sel->r, format_source, &ratio); break; - case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL: + case V4L2_SUBDEV_SEL_TGT_CROP: sel->r = *__resizer_get_crop(res, fh, sel->which); resizer_calc_ratios(res, &sel->r, format_source, &ratio); break; @@ -1293,7 +1293,7 @@ static int resizer_set_selection(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *format_sink, *format_source; struct resizer_ratio ratio; - if (sel->target != V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL || + if (sel->target != V4L2_SUBDEV_SEL_TGT_CROP || sel->pad != RESZ_PAD_SINK) return -EINVAL; diff --git a/drivers/media/video/smiapp/smiapp-core.c b/drivers/media/video/smiapp/smiapp-core.c index e8c93c89265a..37622bb6c667 100644 --- a/drivers/media/video/smiapp/smiapp-core.c +++ b/drivers/media/video/smiapp/smiapp-core.c @@ -1630,7 +1630,7 @@ static void smiapp_propagate(struct v4l2_subdev *subdev, smiapp_get_crop_compose(subdev, fh, crops, &comp, which); switch (target) { - case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL: + case V4L2_SUBDEV_SEL_TGT_CROP: comp->width = crops[SMIAPP_PAD_SINK]->width; comp->height = crops[SMIAPP_PAD_SINK]->height; if (which == V4L2_SUBDEV_FORMAT_ACTIVE) { @@ -1646,7 +1646,7 @@ static void smiapp_propagate(struct v4l2_subdev *subdev, } } /* Fall through */ - case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL: + case V4L2_SUBDEV_SEL_TGT_COMPOSE: *crops[SMIAPP_PAD_SRC] = *comp; break; default: @@ -1722,7 +1722,7 @@ static int smiapp_set_format(struct v4l2_subdev *subdev, if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) ssd->sink_fmt = *crops[ssd->sink_pad]; smiapp_propagate(subdev, fh, fmt->which, - V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL); + V4L2_SUBDEV_SEL_TGT_CROP); mutex_unlock(&sensor->mutex); @@ -1957,7 +1957,7 @@ static int smiapp_set_compose(struct v4l2_subdev *subdev, *comp = sel->r; smiapp_propagate(subdev, fh, sel->which, - V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL); + V4L2_SUBDEV_SEL_TGT_COMPOSE); if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) return smiapp_update_mode(sensor); @@ -1973,7 +1973,7 @@ static int __smiapp_sel_supported(struct v4l2_subdev *subdev, /* We only implement crop in three places. */ switch (sel->target) { - case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL: + case V4L2_SUBDEV_SEL_TGT_CROP: case V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS: if (ssd == sensor->pixel_array && sel->pad == SMIAPP_PA_PAD_SRC) @@ -1987,7 +1987,7 @@ static int __smiapp_sel_supported(struct v4l2_subdev *subdev, == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) return 0; return -EINVAL; - case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL: + case V4L2_SUBDEV_SEL_TGT_COMPOSE: case V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS: if (sel->pad == ssd->source_pad) return -EINVAL; @@ -2050,7 +2050,7 @@ static int smiapp_set_crop(struct v4l2_subdev *subdev, if (ssd != sensor->pixel_array && sel->pad == SMIAPP_PAD_SINK) smiapp_propagate(subdev, fh, sel->which, - V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL); + V4L2_SUBDEV_SEL_TGT_CROP); return 0; } @@ -2096,11 +2096,11 @@ static int __smiapp_get_selection(struct v4l2_subdev *subdev, sel->r = *comp; } break; - case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL: + case V4L2_SUBDEV_SEL_TGT_CROP: case V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS: sel->r = *crops[sel->pad]; break; - case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL: + case V4L2_SUBDEV_SEL_TGT_COMPOSE: sel->r = *comp; break; } @@ -2147,10 +2147,10 @@ static int smiapp_set_selection(struct v4l2_subdev *subdev, sel->r.height); switch (sel->target) { - case V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL: + case V4L2_SUBDEV_SEL_TGT_CROP: ret = smiapp_set_crop(subdev, fh, sel); break; - case V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL: + case V4L2_SUBDEV_SEL_TGT_COMPOSE: ret = smiapp_set_compose(subdev, fh, sel); break; default: diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c index db6e859b93d4..cd86f0c3ec74 100644 --- a/drivers/media/video/v4l2-subdev.c +++ b/drivers/media/video/v4l2-subdev.c @@ -245,7 +245,7 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) memset(&sel, 0, sizeof(sel)); sel.which = crop->which; sel.pad = crop->pad; - sel.target = V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL; + sel.target = V4L2_SUBDEV_SEL_TGT_CROP; rval = v4l2_subdev_call( sd, pad, get_selection, subdev_fh, &sel); @@ -274,7 +274,7 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) memset(&sel, 0, sizeof(sel)); sel.which = crop->which; sel.pad = crop->pad; - sel.target = V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL; + sel.target = V4L2_SUBDEV_SEL_TGT_CROP; sel.r = crop->rect; rval = v4l2_subdev_call( diff --git a/include/linux/v4l2-subdev.h b/include/linux/v4l2-subdev.h index 812019ee1e06..3cbe6889fcb5 100644 --- a/include/linux/v4l2-subdev.h +++ b/include/linux/v4l2-subdev.h @@ -128,14 +128,19 @@ struct v4l2_subdev_frame_interval_enum { #define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG (1 << 2) /* active cropping area */ -#define V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL 0x0000 +#define V4L2_SUBDEV_SEL_TGT_CROP 0x0000 /* cropping bounds */ #define V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS 0x0002 /* current composing area */ -#define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL 0x0100 +#define V4L2_SUBDEV_SEL_TGT_COMPOSE 0x0100 /* composing bounds */ #define V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS 0x0102 +/* backward compatibility definitions */ +#define V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL \ + V4L2_SUBDEV_SEL_TGT_CROP +#define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL \ + V4L2_SUBDEV_SEL_TGT_COMPOSE /** * struct v4l2_subdev_selection - selection info -- 2.30.2