From 1e8b6382fb1716ee3aec47c08e258dd09cc41d5f Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 29 Mar 2011 07:10:50 +0000 Subject: [PATCH] [lantiq] * adds spi driver, thx daniel SVN-Revision: 26355 --- target/linux/lantiq/patches/940-spi1.patch | 44 + target/linux/lantiq/patches/941-spi2.patch | 1103 ++++++++++++++++++++ target/linux/lantiq/patches/942-spi3.patch | 66 ++ target/linux/lantiq/xway/config-default | 5 + 4 files changed, 1218 insertions(+) create mode 100644 target/linux/lantiq/patches/940-spi1.patch create mode 100644 target/linux/lantiq/patches/941-spi2.patch create mode 100644 target/linux/lantiq/patches/942-spi3.patch diff --git a/target/linux/lantiq/patches/940-spi1.patch b/target/linux/lantiq/patches/940-spi1.patch new file mode 100644 index 0000000000..343db3d58e --- /dev/null +++ b/target/linux/lantiq/patches/940-spi1.patch @@ -0,0 +1,44 @@ +From: Daniel Schwierzeck +Date: Thu, 3 Mar 2011 17:15:58 +0000 (+0100) +Subject: MIPS: lantiq: Add platform data for Lantiq SoC SPI controller driver +X-Git-Url: http://nbd.name/gitweb.cgi?p=lantiq.git;a=commitdiff_plain;h=3d21b04682ae8eb1c1965aba39d1796e8c5ad84b;hp=06b420500fe98e37662837e78d8e51aead8aea81 + +MIPS: lantiq: Add platform data for Lantiq SoC SPI controller driver + +Signed-off-by: Daniel Schwierzeck +--- + +--- a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h ++++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h +@@ -48,4 +48,13 @@ + + extern int (*lqpci_plat_dev_init)(struct pci_dev *dev); + ++ ++struct lq_spi_platform_data { ++ u16 num_chipselect; ++}; ++ ++struct lq_spi_controller_data { ++ unsigned gpio; ++}; ++ + #endif +--- a/arch/mips/include/asm/mach-lantiq/xway/xway.h ++++ b/arch/mips/include/asm/mach-lantiq/xway/xway.h +@@ -72,6 +72,7 @@ + #define LQ_PMU_BASE_ADDR (KSEG1 + 0x1F102000) + + #define PMU_DMA 0x0020 ++#define PMU_SPI 0x0100 + #define PMU_USB 0x8041 + #define PMU_LED 0x0800 + #define PMU_GPT 0x1000 +@@ -105,6 +106,7 @@ + + /*------------ SSC */ + #define LQ_SSC_BASE_ADDR (KSEG1 + 0x1e100800) ++#define LQ_SSC_SIZE 0x100 + + /*------------ MEI */ + #define LQ_MEI_BASE_ADDR (KSEG1 + 0x1E116000) diff --git a/target/linux/lantiq/patches/941-spi2.patch b/target/linux/lantiq/patches/941-spi2.patch new file mode 100644 index 0000000000..9cc23a1442 --- /dev/null +++ b/target/linux/lantiq/patches/941-spi2.patch @@ -0,0 +1,1103 @@ +From: Daniel Schwierzeck +Date: Thu, 3 Mar 2011 17:15:30 +0000 (+0100) +Subject: SPI: lantiq: Add driver for Lantiq SoC SPI controller +X-Git-Url: http://nbd.name/gitweb.cgi?p=lantiq.git;a=commitdiff_plain;h=653c95b8b9066c9c6ac08bd64d0ceee439e9fd90;hp=3d21b04682ae8eb1c1965aba39d1796e8c5ad84b + +SPI: lantiq: Add driver for Lantiq SoC SPI controller + +Signed-off-by: Daniel Schwierzeck +--- + +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -176,6 +176,14 @@ + This enables using the Freescale i.MX SPI controllers in master + mode. + ++config SPI_LANTIQ ++ tristate "Lantiq SoC SPI controller" ++ depends on SOC_LANTIQ_XWAY ++ select SPI_BITBANG ++ help ++ This driver supports the Lantiq SoC SPI controller in master ++ mode. ++ + config SPI_LM70_LLP + tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" + depends on PARPORT && EXPERIMENTAL +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -24,6 +24,7 @@ + obj-$(CONFIG_SPI_GPIO) += spi_gpio.o + obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o + obj-$(CONFIG_SPI_IMX) += spi_imx.o ++obj-$(CONFIG_SPI_LANTIQ) += spi_lantiq.o + obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o + obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o + obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o +--- /dev/null ++++ b/drivers/spi/spi_lantiq.c +@@ -0,0 +1,1063 @@ ++/* ++ * Lantiq SoC SPI controller ++ * ++ * Copyright (C) 2011 Daniel Schwierzeck ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#define LQ_SPI_CLC 0x00 /* Clock control */ ++#define LQ_SPI_PISEL 0x04 /* Port input select */ ++#define LQ_SPI_ID 0x08 /* Identification */ ++#define LQ_SPI_CON 0x10 /* Control */ ++#define LQ_SPI_STAT 0x14 /* Status */ ++#define LQ_SPI_WHBSTATE 0x18 /* Write HW modified state */ ++#define LQ_SPI_TB 0x20 /* Transmit buffer */ ++#define LQ_SPI_RB 0x24 /* Receive buffer */ ++#define LQ_SPI_RXFCON 0x30 /* Receive FIFO control */ ++#define LQ_SPI_TXFCON 0x34 /* Transmit FIFO control */ ++#define LQ_SPI_FSTAT 0x38 /* FIFO status */ ++#define LQ_SPI_BRT 0x40 /* Baudrate timer */ ++#define LQ_SPI_BRSTAT 0x44 /* Baudrate timer status */ ++#define LQ_SPI_SFCON 0x60 /* Serial frame control */ ++#define LQ_SPI_SFSTAT 0x64 /* Serial frame status */ ++#define LQ_SPI_GPOCON 0x70 /* General purpose output control */ ++#define LQ_SPI_GPOSTAT 0x74 /* General purpose output status */ ++#define LQ_SPI_FGPO 0x78 /* Forced general purpose output */ ++#define LQ_SPI_RXREQ 0x80 /* Receive request */ ++#define LQ_SPI_RXCNT 0x84 /* Receive count */ ++#define LQ_SPI_DMACON 0xEC /* DMA control */ ++#define LQ_SPI_IRNEN 0xF4 /* Interrupt node enable */ ++#define LQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */ ++#define LQ_SPI_IRNCR 0xFC /* Interrupt node control */ ++ ++#define LQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */ ++#define LQ_SPI_CLC_SMC_MASK 0xFF ++#define LQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */ ++#define LQ_SPI_CLC_RMC_MASK 0xFF ++#define LQ_SPI_CLC_DISS BIT(1) /* Disable status bit */ ++#define LQ_SPI_CLC_DISR BIT(0) /* Disable request bit */ ++ ++#define LQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */ ++#define LQ_SPI_ID_TXFS_MASK 0x3F ++#define LQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */ ++#define LQ_SPI_ID_RXFS_MASK 0x3F ++#define LQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */ ++#define LQ_SPI_ID_CFG BIT(5) /* DMA interface support */ ++ ++#define LQ_SPI_CON_BM_SHIFT 16 /* Data width selection */ ++#define LQ_SPI_CON_BM_MASK 0x1F ++#define LQ_SPI_CON_EM BIT(24) /* Echo mode */ ++#define LQ_SPI_CON_IDLE BIT(23) /* Idle bit value */ ++#define LQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */ ++#define LQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ ++#define LQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ ++#define LQ_SPI_CON_AEN BIT(10) /* Abort error enable */ ++#define LQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */ ++#define LQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ ++#define LQ_SPI_CON_LB BIT(7) /* Loopback control */ ++#define LQ_SPI_CON_PO BIT(6) /* Clock polarity control */ ++#define LQ_SPI_CON_PH BIT(5) /* Clock phase control */ ++#define LQ_SPI_CON_HB BIT(4) /* Heading control */ ++#define LQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */ ++#define LQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ ++ ++#define LQ_SPI_STAT_RXBV_MASK 0x7 ++#define LQ_SPI_STAT_RXBV_SHIFT 28 ++#define LQ_SPI_STAT_BSY BIT(13) /* Busy flag */ ++#define LQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ ++#define LQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ ++#define LQ_SPI_STAT_AE BIT(10) /* Abort error flag */ ++#define LQ_SPI_STAT_RE BIT(9) /* Receive error flag */ ++#define LQ_SPI_STAT_TE BIT(8) /* Transmit error flag */ ++#define LQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */ ++#define LQ_SPI_STAT_EN BIT(0) /* Enable bit */ ++ ++#define LQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ ++#define LQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ ++#define LQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ ++#define LQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ ++#define LQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ ++#define LQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ ++#define LQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ ++#define LQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ ++#define LQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ ++#define LQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ ++#define LQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ ++#define LQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ ++#define LQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ ++#define LQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ ++#define LQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ ++#define LQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ ++#define LQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50 ++ ++#define LQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */ ++#define LQ_SPI_RXFCON_RXFITL_MASK 0x3F ++#define LQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ ++#define LQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ ++ ++#define LQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */ ++#define LQ_SPI_TXFCON_TXFITL_MASK 0x3F ++#define LQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ ++#define LQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ ++ ++#define LQ_SPI_FSTAT_RXFFL_MASK 0x3f ++#define LQ_SPI_FSTAT_RXFFL_SHIFT 0 ++#define LQ_SPI_FSTAT_TXFFL_MASK 0x3f ++#define LQ_SPI_FSTAT_TXFFL_SHIFT 8 ++ ++#define LQ_SPI_GPOCON_ISCSBN_SHIFT 8 ++#define LQ_SPI_GPOCON_INVOUTN_SHIFT 0 ++ ++#define LQ_SPI_FGPO_SETOUTN_SHIFT 8 ++#define LQ_SPI_FGPO_CLROUTN_SHIFT 0 ++ ++#define LQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */ ++#define LQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */ ++ ++#define LQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ ++#define LQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */ ++#define LQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */ ++#define LQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */ ++#define LQ_SPI_IRNEN_ALL 0xF ++ ++/* Hard-wired GPIOs used by SPI controller */ ++#define LQ_SPI_GPIO_DI 16 ++#define LQ_SPI_GPIO_DO 17 ++#define LQ_SPI_GPIO_CLK 18 ++ ++struct lq_spi { ++ struct spi_bitbang bitbang; ++ struct completion done; ++ spinlock_t lock; ++ ++ struct device *dev; ++ void __iomem *base; ++ struct clk *clk; ++ ++ int status; ++ int irq[3]; ++ ++ const u8 *tx; ++ u8 *rx; ++ u32 tx_cnt; ++ u32 rx_cnt; ++ u32 len; ++ struct spi_transfer *curr_transfer; ++ ++ u32 (*get_tx) (struct lq_spi *); ++ ++ u16 txfs; ++ u16 rxfs; ++ unsigned dma_support:1; ++ unsigned cfg_mode:1; ++ ++}; ++ ++struct lq_spi_controller_state { ++ void (*cs_activate) (struct spi_device *); ++ void (*cs_deactivate) (struct spi_device *); ++}; ++ ++struct lq_spi_irq_map { ++ char *name; ++ irq_handler_t handler; ++}; ++ ++struct lq_spi_cs_gpio_map { ++ unsigned gpio; ++ unsigned altsel0; ++ unsigned altsel1; ++}; ++ ++static inline struct lq_spi *lq_spi_to_hw(struct spi_device *spi) ++{ ++ return spi_master_get_devdata(spi->master); ++} ++ ++static inline u32 lq_spi_reg_read(struct lq_spi *hw, u32 reg) ++{ ++ return ioread32be(hw->base + reg); ++} ++ ++static inline void lq_spi_reg_write(struct lq_spi *hw, u32 val, u32 reg) ++{ ++ iowrite32be(val, hw->base + reg); ++} ++ ++static inline void lq_spi_reg_setbit(struct lq_spi *hw, u32 bits, u32 reg) ++{ ++ u32 val; ++ ++ val = lq_spi_reg_read(hw, reg); ++ val |= bits; ++ lq_spi_reg_write(hw, val, reg); ++} ++ ++static inline void lq_spi_reg_clearbit(struct lq_spi *hw, u32 bits, u32 reg) ++{ ++ u32 val; ++ ++ val = lq_spi_reg_read(hw, reg); ++ val &= ~bits; ++ lq_spi_reg_write(hw, val, reg); ++} ++ ++static void lq_spi_hw_enable(struct lq_spi *hw) ++{ ++ u32 clc; ++ ++ /* Power-up mdule */ ++ lq_pmu_enable(PMU_SPI); ++ ++ /* ++ * Set clock divider for run mode to 1 to ++ * run at same frequency as FPI bus ++ */ ++ clc = (1 << LQ_SPI_CLC_RMC_SHIFT); ++ lq_spi_reg_write(hw, clc, LQ_SPI_CLC); ++} ++ ++static void lq_spi_hw_disable(struct lq_spi *hw) ++{ ++ /* Set clock divider to 0 and set module disable bit */ ++ lq_spi_reg_write(hw, LQ_SPI_CLC_DISS, LQ_SPI_CLC); ++ ++ /* Power-down mdule */ ++ lq_pmu_disable(PMU_SPI); ++} ++ ++static void lq_spi_reset_fifos(struct lq_spi *hw) ++{ ++ u32 val; ++ ++ /* ++ * Enable and flush FIFOs. Set interrupt trigger level to ++ * half of FIFO count implemented in hardware. ++ */ ++ if (hw->txfs > 1) { ++ val = hw->txfs << (LQ_SPI_TXFCON_TXFITL_SHIFT - 1); ++ val |= LQ_SPI_TXFCON_TXFEN | LQ_SPI_TXFCON_TXFLU; ++ lq_spi_reg_write(hw, val, LQ_SPI_TXFCON); ++ } ++ ++ if (hw->rxfs > 1) { ++ val = hw->rxfs << (LQ_SPI_RXFCON_RXFITL_SHIFT - 1); ++ val |= LQ_SPI_RXFCON_RXFEN | LQ_SPI_RXFCON_RXFLU; ++ lq_spi_reg_write(hw, val, LQ_SPI_RXFCON); ++ } ++} ++ ++static inline int lq_spi_wait_ready(struct lq_spi *hw) ++{ ++ u32 stat; ++ unsigned long timeout; ++ ++ timeout = jiffies + msecs_to_jiffies(200); ++ ++ do { ++ stat = lq_spi_reg_read(hw, LQ_SPI_STAT); ++ if (!(stat & LQ_SPI_STAT_BSY)) ++ return 0; ++ ++ cond_resched(); ++ } while (!time_after_eq(jiffies, timeout)); ++ ++ dev_err(hw->dev, "SPI wait ready timed out\n"); ++ ++ return -ETIMEDOUT; ++} ++ ++static void lq_spi_config_mode_set(struct lq_spi *hw) ++{ ++ if (hw->cfg_mode) ++ return; ++ ++ /* ++ * Putting the SPI module in config mode is only safe if no ++ * transfer is in progress as indicated by busy flag STATE.BSY. ++ */ ++ if (lq_spi_wait_ready(hw)) { ++ lq_spi_reset_fifos(hw); ++ hw->status = -ETIMEDOUT; ++ } ++ lq_spi_reg_write(hw, LQ_SPI_WHBSTATE_CLREN, LQ_SPI_WHBSTATE); ++ ++ hw->cfg_mode = 1; ++} ++ ++static void lq_spi_run_mode_set(struct lq_spi *hw) ++{ ++ if (!hw->cfg_mode) ++ return; ++ ++ lq_spi_reg_write(hw, LQ_SPI_WHBSTATE_SETEN, LQ_SPI_WHBSTATE); ++ ++ hw->cfg_mode = 0; ++} ++ ++static u32 lq_spi_tx_word_u8(struct lq_spi *hw) ++{ ++ const u8 *tx = hw->tx; ++ u32 data = *tx++; ++ ++ hw->tx_cnt++; ++ hw->tx++; ++ ++ return data; ++} ++ ++static u32 lq_spi_tx_word_u16(struct lq_spi *hw) ++{ ++ const u16 *tx = (u16 *) hw->tx; ++ u32 data = *tx++; ++ ++ hw->tx_cnt += 2; ++ hw->tx += 2; ++ ++ return data; ++} ++ ++static u32 lq_spi_tx_word_u32(struct lq_spi *hw) ++{ ++ const u32 *tx = (u32 *) hw->tx; ++ u32 data = *tx++; ++ ++ hw->tx_cnt += 4; ++ hw->tx += 4; ++ ++ return data; ++} ++ ++static void lq_spi_bits_per_word_set(struct spi_device *spi) ++{ ++ struct lq_spi *hw = lq_spi_to_hw(spi); ++ u32 bm; ++ u8 bits_per_word = spi->bits_per_word; ++ ++ /* ++ * Use either default value of SPI device or value ++ * from current transfer. ++ */ ++ if (hw->curr_transfer && hw->curr_transfer->bits_per_word) ++ bits_per_word = hw->curr_transfer->bits_per_word; ++ ++ if (bits_per_word <= 8) ++ hw->get_tx = lq_spi_tx_word_u8; ++ else if (bits_per_word <= 16) ++ hw->get_tx = lq_spi_tx_word_u16; ++ else if (bits_per_word <= 32) ++ hw->get_tx = lq_spi_tx_word_u32; ++ ++ /* CON.BM value = bits_per_word - 1 */ ++ bm = (bits_per_word - 1) << LQ_SPI_CON_BM_SHIFT; ++ ++ lq_spi_reg_clearbit(hw, LQ_SPI_CON_BM_MASK << ++ LQ_SPI_CON_BM_SHIFT, LQ_SPI_CON); ++ lq_spi_reg_setbit(hw, bm, LQ_SPI_CON); ++} ++ ++static void lq_spi_speed_set(struct spi_device *spi) ++{ ++ struct lq_spi *hw = lq_spi_to_hw(spi); ++ u32 br, max_speed_hz, spi_clk; ++ u32 speed_hz = spi->max_speed_hz; ++ ++ /* ++ * Use either default value of SPI device or value ++ * from current transfer. ++ */ ++ if (hw->curr_transfer && hw->curr_transfer->speed_hz) ++ speed_hz = hw->curr_transfer->speed_hz; ++ ++ /* ++ * SPI module clock is derived from FPI bus clock dependent on ++ * divider value in CLC.RMS which is always set to 1. ++ */ ++ spi_clk = clk_get_rate(hw->clk); ++ ++ /* ++ * Maximum SPI clock frequency in master mode is half of ++ * SPI module clock frequency. Maximum reload value of ++ * baudrate generator BR is 2^16. ++ */ ++ max_speed_hz = spi_clk / 2; ++ if (speed_hz >= max_speed_hz) ++ br = 0; ++ else ++ br = (max_speed_hz / speed_hz) - 1; ++ ++ if (br > 0xFFFF) ++ br = 0xFFFF; ++ ++ lq_spi_reg_write(hw, br, LQ_SPI_BRT); ++} ++ ++static void lq_spi_clockmode_set(struct spi_device *spi) ++{ ++ struct lq_spi *hw = lq_spi_to_hw(spi); ++ u32 con; ++ ++ con = lq_spi_reg_read(hw, LQ_SPI_CON); ++ ++ /* ++ * SPI mode mapping in CON register: ++ * Mode CPOL CPHA CON.PO CON.PH ++ * 0 0 0 0 1 ++ * 1 0 1 0 0 ++ * 2 1 0 1 1 ++ * 3 1 1 1 0 ++ */ ++ if (spi->mode & SPI_CPHA) ++ con &= ~LQ_SPI_CON_PH; ++ else ++ con |= LQ_SPI_CON_PH; ++ ++ if (spi->mode & SPI_CPOL) ++ con |= LQ_SPI_CON_PO; ++ else ++ con &= ~LQ_SPI_CON_PO; ++ ++ /* Set heading control */ ++ if (spi->mode & SPI_LSB_FIRST) ++ con &= ~LQ_SPI_CON_HB; ++ else ++ con |= LQ_SPI_CON_HB; ++ ++ lq_spi_reg_write(hw, con, LQ_SPI_CON); ++} ++ ++static void lq_spi_xmit_set(struct lq_spi *hw, struct spi_transfer *t) ++{ ++ u32 con; ++ ++ con = lq_spi_reg_read(hw, LQ_SPI_CON); ++ ++ if (t) { ++ if (t->tx_buf && t->rx_buf) { ++ con &= ~(LQ_SPI_CON_TXOFF | LQ_SPI_CON_RXOFF); ++ } else if (t->rx_buf) { ++ con &= ~LQ_SPI_CON_RXOFF; ++ con |= LQ_SPI_CON_TXOFF; ++ } else if (t->tx_buf) { ++ con &= ~LQ_SPI_CON_TXOFF; ++ con |= LQ_SPI_CON_RXOFF; ++ } ++ } else ++ con |= (LQ_SPI_CON_TXOFF | LQ_SPI_CON_RXOFF); ++ ++ lq_spi_reg_write(hw, con, LQ_SPI_CON); ++} ++ ++static void lq_spi_gpio_cs_activate(struct spi_device *spi) ++{ ++ struct lq_spi_controller_data *cdata = spi->controller_data; ++ int val = spi->mode & SPI_CS_HIGH ? 1 : 0; ++ ++ gpio_set_value(cdata->gpio, val); ++} ++ ++static void lq_spi_gpio_cs_deactivate(struct spi_device *spi) ++{ ++ struct lq_spi_controller_data *cdata = spi->controller_data; ++ int val = spi->mode & SPI_CS_HIGH ? 0 : 1; ++ ++ gpio_set_value(cdata->gpio, val); ++} ++ ++static void lq_spi_internal_cs_activate(struct spi_device *spi) ++{ ++ struct lq_spi *hw = lq_spi_to_hw(spi); ++ u32 fgpo; ++ ++ fgpo = (1 << (spi->chip_select + LQ_SPI_FGPO_CLROUTN_SHIFT)); ++ lq_spi_reg_setbit(hw, fgpo, LQ_SPI_FGPO); ++} ++ ++static void lq_spi_internal_cs_deactivate(struct spi_device *spi) ++{ ++ struct lq_spi *hw = lq_spi_to_hw(spi); ++ u32 fgpo; ++ ++ fgpo = (1 << (spi->chip_select + LQ_SPI_FGPO_SETOUTN_SHIFT)); ++ lq_spi_reg_setbit(hw, fgpo, LQ_SPI_FGPO); ++} ++ ++static void lq_spi_chipselect(struct spi_device *spi, int cs) ++{ ++ struct lq_spi *hw = lq_spi_to_hw(spi); ++ struct lq_spi_controller_state *cstate = spi->controller_state; ++ ++ switch (cs) { ++ case BITBANG_CS_ACTIVE: ++ lq_spi_bits_per_word_set(spi); ++ lq_spi_speed_set(spi); ++ lq_spi_clockmode_set(spi); ++ lq_spi_run_mode_set(hw); ++ ++ cstate->cs_activate(spi); ++ break; ++ ++ case BITBANG_CS_INACTIVE: ++ cstate->cs_deactivate(spi); ++ ++ lq_spi_config_mode_set(hw); ++ ++ break; ++ } ++} ++ ++static int lq_spi_setup_transfer(struct spi_device *spi, ++ struct spi_transfer *t) ++{ ++ struct lq_spi *hw = lq_spi_to_hw(spi); ++ u8 bits_per_word = spi->bits_per_word; ++ ++ hw->curr_transfer = t; ++ ++ if (t && t->bits_per_word) ++ bits_per_word = t->bits_per_word; ++ ++ if (bits_per_word > 32) ++ return -EINVAL; ++ ++ lq_spi_config_mode_set(hw); ++ ++ return 0; ++} ++ ++static const struct lq_spi_cs_gpio_map lq_spi_cs[] = { ++ { 15, 1, 0 }, ++ { 22, 1, 0 }, ++ { 13, 0, 1 }, ++ { 10, 0, 1 }, ++ { 9, 0, 1 }, ++ { 11, 1, 1 }, ++}; ++ ++static int lq_spi_setup(struct spi_device *spi) ++{ ++ struct lq_spi *hw = lq_spi_to_hw(spi); ++ struct lq_spi_controller_data *cdata = spi->controller_data; ++ struct lq_spi_controller_state *cstate; ++ u32 gpocon, fgpo; ++ int ret; ++ ++ /* Set default word length to 8 if not set */ ++ if (!spi->bits_per_word) ++ spi->bits_per_word = 8; ++ ++ if (spi->bits_per_word > 32) ++ return -EINVAL; ++ ++ if (!spi->controller_state) { ++ cstate = kzalloc(sizeof(struct lq_spi_controller_state), ++ GFP_KERNEL); ++ if (!cstate) ++ return -ENOMEM; ++ ++ spi->controller_state = cstate; ++ } else ++ return 0; ++ ++ /* ++ * Up to six GPIOs can be connected to the SPI module ++ * via GPIO alternate function to control the chip select lines. ++ * For more flexibility in board layout this driver can also control ++ * the CS lines via GPIO API. If GPIOs should be used, board setup code ++ * have to register the SPI device with struct lq_spi_controller_data ++ * attached. ++ */ ++ if (cdata && cdata->gpio) { ++ ret = gpio_request(cdata->gpio, "spi-cs"); ++ if (ret) ++ return -EBUSY; ++ ++ ret = spi->mode & SPI_CS_HIGH ? 0 : 1; ++ gpio_direction_output(cdata->gpio, ret); ++ ++ cstate->cs_activate = lq_spi_gpio_cs_activate; ++ cstate->cs_deactivate = lq_spi_gpio_cs_deactivate; ++ } else { ++ ret = lq_gpio_request(lq_spi_cs[spi->chip_select].gpio, ++ lq_spi_cs[spi->chip_select].altsel0, ++ lq_spi_cs[spi->chip_select].altsel1, ++ 1, "spi-cs"); ++ if (ret) ++ return -EBUSY; ++ ++ gpocon = (1 << (spi->chip_select + ++ LQ_SPI_GPOCON_ISCSBN_SHIFT)); ++ ++ if (spi->mode & SPI_CS_HIGH) ++ gpocon |= (1 << spi->chip_select); ++ ++ fgpo = (1 << (spi->chip_select + LQ_SPI_FGPO_SETOUTN_SHIFT)); ++ ++ lq_spi_reg_setbit(hw, gpocon, LQ_SPI_GPOCON); ++ lq_spi_reg_setbit(hw, fgpo, LQ_SPI_FGPO); ++ ++ cstate->cs_activate = lq_spi_internal_cs_activate; ++ cstate->cs_deactivate = lq_spi_internal_cs_deactivate; ++ } ++ ++ return 0; ++} ++ ++static void lq_spi_cleanup(struct spi_device *spi) ++{ ++ struct lq_spi_controller_data *cdata = spi->controller_data; ++ struct lq_spi_controller_state *cstate = spi->controller_state; ++ unsigned gpio; ++ ++ if (cdata && cdata->gpio) ++ gpio = cdata->gpio; ++ else ++ gpio = lq_spi_cs[spi->chip_select].gpio; ++ ++ gpio_free(gpio); ++ kfree(cstate); ++} ++ ++static void lq_spi_txfifo_write(struct lq_spi *hw) ++{ ++ u32 fstat, data; ++ u16 fifo_space; ++ ++ /* Determine how much FIFOs are free for TX data */ ++ fstat = lq_spi_reg_read(hw, LQ_SPI_FSTAT); ++ fifo_space = hw->txfs - ((fstat >> LQ_SPI_FSTAT_TXFFL_SHIFT) & ++ LQ_SPI_FSTAT_TXFFL_MASK); ++ ++ if (!fifo_space) ++ return; ++ ++ while (hw->tx_cnt < hw->len && fifo_space) { ++ data = hw->get_tx(hw); ++ lq_spi_reg_write(hw, data, LQ_SPI_TB); ++ fifo_space--; ++ } ++} ++ ++static void lq_spi_rxfifo_read(struct lq_spi *hw) ++{ ++ u32 fstat, data, *rx32; ++ u16 fifo_fill; ++ u8 rxbv, shift, *rx8; ++ ++ /* Determine how much FIFOs are filled with RX data */ ++ fstat = lq_spi_reg_read(hw, LQ_SPI_FSTAT); ++ fifo_fill = ((fstat >> LQ_SPI_FSTAT_RXFFL_SHIFT) ++ & LQ_SPI_FSTAT_RXFFL_MASK); ++ ++ if (!fifo_fill) ++ return; ++ ++ /* ++ * The 32 bit FIFO is always used completely independent from the ++ * bits_per_word value. Thus four bytes have to be read at once ++ * per FIFO. ++ */ ++ rx32 = (u32 *) hw->rx; ++ while (hw->len - hw->rx_cnt >= 4 && fifo_fill) { ++ *rx32++ = lq_spi_reg_read(hw, LQ_SPI_RB); ++ hw->rx_cnt += 4; ++ hw->rx += 4; ++ fifo_fill--; ++ } ++ ++ /* ++ * If there are remaining bytes, read byte count from STAT.RXBV ++ * register and read the data byte-wise. ++ */ ++ while (fifo_fill && hw->rx_cnt < hw->len) { ++ rxbv = (lq_spi_reg_read(hw, LQ_SPI_STAT) >> ++ LQ_SPI_STAT_RXBV_SHIFT) & LQ_SPI_STAT_RXBV_MASK; ++ data = lq_spi_reg_read(hw, LQ_SPI_RB); ++ ++ shift = (rxbv - 1) * 8; ++ rx8 = hw->rx; ++ ++ while (rxbv) { ++ *rx8++ = (data >> shift) & 0xFF; ++ rxbv--; ++ shift -= 8; ++ hw->rx_cnt++; ++ hw->rx++; ++ } ++ ++ fifo_fill--; ++ } ++} ++ ++static void lq_spi_rxreq_set(struct lq_spi *hw) ++{ ++ u32 rxreq, rxreq_max, rxtodo; ++ ++ rxtodo = lq_spi_reg_read(hw, LQ_SPI_RXCNT) & LQ_SPI_RXCNT_TODO_MASK; ++ ++ /* ++ * In RX-only mode the serial clock is activated only after writing ++ * the expected amount of RX bytes into RXREQ register. ++ * To avoid receive overflows at high clocks it is better to request ++ * only the amount of bytes that fits into all FIFOs. This value ++ * depends on the FIFO size implemented in hardware. ++ */ ++ rxreq = hw->len - hw->rx_cnt; ++ rxreq_max = hw->rxfs << 2; ++ rxreq = min(rxreq_max, rxreq); ++ ++ if (!rxtodo && rxreq) ++ lq_spi_reg_write(hw, rxreq, LQ_SPI_RXREQ); ++} ++ ++static inline void lq_spi_complete(struct lq_spi *hw) ++{ ++ complete(&hw->done); ++} ++ ++irqreturn_t lq_spi_tx_irq(int irq, void *data) ++{ ++ struct lq_spi *hw = data; ++ unsigned long flags; ++ int completed = 0; ++ ++ spin_lock_irqsave(&hw->lock, flags); ++ ++ if (hw->tx_cnt < hw->len) ++ lq_spi_txfifo_write(hw); ++ ++ if (hw->tx_cnt == hw->len) ++ completed = 1; ++ ++ spin_unlock_irqrestore(&hw->lock, flags); ++ ++ if (completed) ++ lq_spi_complete(hw); ++ ++ return IRQ_HANDLED; ++} ++ ++irqreturn_t lq_spi_rx_irq(int irq, void *data) ++{ ++ struct lq_spi *hw = data; ++ unsigned long flags; ++ int completed = 0; ++ ++ spin_lock_irqsave(&hw->lock, flags); ++ ++ if (hw->rx_cnt < hw->len) { ++ lq_spi_rxfifo_read(hw); ++ ++ if (hw->tx && hw->tx_cnt < hw->len) ++ lq_spi_txfifo_write(hw); ++ } ++ ++ if (hw->rx_cnt == hw->len) ++ completed = 1; ++ else if (!hw->tx) ++ lq_spi_rxreq_set(hw); ++ ++ spin_unlock_irqrestore(&hw->lock, flags); ++ ++ if (completed) ++ lq_spi_complete(hw); ++ ++ return IRQ_HANDLED; ++} ++ ++irqreturn_t lq_spi_err_irq(int irq, void *data) ++{ ++ struct lq_spi *hw = data; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&hw->lock, flags); ++ ++ /* Disable all interrupts */ ++ lq_spi_reg_clearbit(hw, LQ_SPI_IRNEN_ALL, LQ_SPI_IRNEN); ++ ++ /* Clear all error flags */ ++ lq_spi_reg_write(hw, LQ_SPI_WHBSTATE_CLR_ERRORS, LQ_SPI_WHBSTATE); ++ ++ /* Flush FIFOs */ ++ lq_spi_reg_setbit(hw, LQ_SPI_RXFCON_RXFLU, LQ_SPI_RXFCON); ++ lq_spi_reg_setbit(hw, LQ_SPI_TXFCON_TXFLU, LQ_SPI_TXFCON); ++ ++ hw->status = -EIO; ++ spin_unlock_irqrestore(&hw->lock, flags); ++ ++ lq_spi_complete(hw); ++ ++ return IRQ_HANDLED; ++} ++ ++static int lq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) ++{ ++ struct lq_spi *hw = lq_spi_to_hw(spi); ++ u32 irq_flags = 0; ++ ++ hw->tx = t->tx_buf; ++ hw->rx = t->rx_buf; ++ hw->len = t->len; ++ hw->tx_cnt = 0; ++ hw->rx_cnt = 0; ++ hw->status = 0; ++ INIT_COMPLETION(hw->done); ++ ++ lq_spi_xmit_set(hw, t); ++ ++ /* Enable error interrupts */ ++ lq_spi_reg_setbit(hw, LQ_SPI_IRNEN_E, LQ_SPI_IRNEN); ++ ++ if (hw->tx) { ++ /* Initially fill TX FIFO with as much data as possible */ ++ lq_spi_txfifo_write(hw); ++ irq_flags |= LQ_SPI_IRNEN_T; ++ ++ /* Always enable RX interrupt in Full Duplex mode */ ++ if (hw->rx) ++ irq_flags |= LQ_SPI_IRNEN_R; ++ } else if (hw->rx) { ++ /* Start RX clock */ ++ lq_spi_rxreq_set(hw); ++ ++ /* Enable RX interrupt to receive data from RX FIFOs */ ++ irq_flags |= LQ_SPI_IRNEN_R; ++ } ++ ++ /* Enable TX or RX interrupts */ ++ lq_spi_reg_setbit(hw, irq_flags, LQ_SPI_IRNEN); ++ wait_for_completion_interruptible(&hw->done); ++ ++ /* Disable all interrupts */ ++ lq_spi_reg_clearbit(hw, LQ_SPI_IRNEN_ALL, LQ_SPI_IRNEN); ++ ++ /* ++ * Return length of current transfer for bitbang utility code if ++ * no errors occured during transmission. ++ */ ++ if (!hw->status) ++ hw->status = hw->len; ++ ++ return hw->status; ++} ++ ++static const struct lq_spi_irq_map lq_spi_irqs[] = { ++ { "spi_tx", lq_spi_tx_irq }, ++ { "spi_rx", lq_spi_rx_irq }, ++ { "spi_err", lq_spi_err_irq }, ++}; ++ ++static int __init lq_spi_probe(struct platform_device *pdev) ++{ ++ struct spi_master *master; ++ struct resource *r; ++ struct lq_spi *hw; ++ struct lq_spi_platform_data *pdata = pdev->dev.platform_data; ++ int ret, i; ++ u32 data, id; ++ ++ master = spi_alloc_master(&pdev->dev, sizeof(struct lq_spi)); ++ if (!master) { ++ dev_err(&pdev->dev, "spi_alloc_master\n"); ++ ret = -ENOMEM; ++ goto err; ++ } ++ ++ hw = spi_master_get_devdata(master); ++ ++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (r == NULL) { ++ dev_err(&pdev->dev, "platform_get_resource\n"); ++ ret = -ENOENT; ++ goto err_master; ++ } ++ ++ r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r), ++ pdev->name); ++ if (!r) { ++ dev_err(&pdev->dev, "devm_request_mem_region\n"); ++ ret = -ENXIO; ++ goto err_master; ++ } ++ ++ hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r)); ++ if (!hw->base) { ++ dev_err(&pdev->dev, "devm_ioremap_nocache\n"); ++ ret = -ENXIO; ++ goto err_master; ++ } ++ ++ hw->clk = clk_get(&pdev->dev, "fpi"); ++ if (IS_ERR(hw->clk)) { ++ dev_err(&pdev->dev, "clk_get\n"); ++ ret = PTR_ERR(hw->clk); ++ goto err_master; ++ } ++ ++ memset(hw->irq, 0, sizeof(hw->irq)); ++ for (i = 0; i < ARRAY_SIZE(lq_spi_irqs); i++) { ++ ret = platform_get_irq_byname(pdev, lq_spi_irqs[i].name); ++ if (0 > ret) { ++ dev_err(&pdev->dev, "platform_get_irq_byname\n"); ++ goto err_irq; ++ } ++ ++ hw->irq[i] = ret; ++ ret = request_irq(hw->irq[i], lq_spi_irqs[i].handler, ++ 0, lq_spi_irqs[i].name, hw); ++ if (ret) { ++ dev_err(&pdev->dev, "request_irq\n"); ++ goto err_irq; ++ } ++ } ++ ++ hw->bitbang.master = spi_master_get(master); ++ hw->bitbang.chipselect = lq_spi_chipselect; ++ hw->bitbang.setup_transfer = lq_spi_setup_transfer; ++ hw->bitbang.txrx_bufs = lq_spi_txrx_bufs; ++ ++ master->bus_num = pdev->id; ++ master->num_chipselect = pdata->num_chipselect; ++ master->setup = lq_spi_setup; ++ master->cleanup = lq_spi_cleanup; ++ ++ hw->dev = &pdev->dev; ++ init_completion(&hw->done); ++ spin_lock_init(&hw->lock); ++ ++ /* Set GPIO alternate functions to SPI */ ++ lq_gpio_request(LQ_SPI_GPIO_DI, 1, 0, 0, "spi-di"); ++ lq_gpio_request(LQ_SPI_GPIO_DO, 1, 0, 1, "spi-do"); ++ lq_gpio_request(LQ_SPI_GPIO_CLK, 1, 0, 1, "spi-clk"); ++ ++ lq_spi_hw_enable(hw); ++ ++ /* Read module capabilities */ ++ id = lq_spi_reg_read(hw, LQ_SPI_ID); ++ hw->txfs = (id >> LQ_SPI_ID_TXFS_SHIFT) & LQ_SPI_ID_TXFS_MASK; ++ hw->rxfs = (id >> LQ_SPI_ID_TXFS_SHIFT) & LQ_SPI_ID_TXFS_MASK; ++ hw->dma_support = (id & LQ_SPI_ID_CFG) ? 1 : 0; ++ ++ lq_spi_config_mode_set(hw); ++ ++ /* Enable error checking, disable TX/RX, set idle value high */ ++ data = LQ_SPI_CON_RUEN | LQ_SPI_CON_AEN | ++ LQ_SPI_CON_TEN | LQ_SPI_CON_REN | ++ LQ_SPI_CON_TXOFF | LQ_SPI_CON_RXOFF | LQ_SPI_CON_IDLE; ++ lq_spi_reg_write(hw, data, LQ_SPI_CON); ++ ++ /* Enable master mode and clear error flags */ ++ lq_spi_reg_write(hw, LQ_SPI_WHBSTATE_SETMS | ++ LQ_SPI_WHBSTATE_CLR_ERRORS, LQ_SPI_WHBSTATE); ++ ++ /* Reset GPIO/CS registers */ ++ lq_spi_reg_write(hw, 0x0, LQ_SPI_GPOCON); ++ lq_spi_reg_write(hw, 0xFF00, LQ_SPI_FGPO); ++ ++ /* Enable and flush FIFOs */ ++ lq_spi_reset_fifos(hw); ++ ++ ret = spi_bitbang_start(&hw->bitbang); ++ if (ret) { ++ dev_err(&pdev->dev, "spi_bitbang_start\n"); ++ goto err_bitbang; ++ } ++ ++ platform_set_drvdata(pdev, hw); ++ ++ pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n", ++ id & LQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support); ++ ++ return 0; ++ ++err_bitbang: ++ lq_spi_hw_disable(hw); ++ ++err_irq: ++ clk_put(hw->clk); ++ ++ for (; i > 0; i--) ++ free_irq(hw->irq[i], hw); ++ ++err_master: ++ spi_master_put(master); ++ ++err: ++ return ret; ++} ++ ++static int __exit lq_spi_remove(struct platform_device *pdev) ++{ ++ struct lq_spi *hw = platform_get_drvdata(pdev); ++ int ret, i; ++ ++ ret = spi_bitbang_stop(&hw->bitbang); ++ if (ret) ++ return ret; ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ lq_spi_config_mode_set(hw); ++ lq_spi_hw_disable(hw); ++ ++ for (i = 0; i < ARRAY_SIZE(hw->irq); i++) ++ if (0 < hw->irq[i]) ++ free_irq(hw->irq[i], hw); ++ ++ gpio_free(LQ_SPI_GPIO_DI); ++ gpio_free(LQ_SPI_GPIO_DO); ++ gpio_free(LQ_SPI_GPIO_CLK); ++ ++ clk_put(hw->clk); ++ spi_master_put(hw->bitbang.master); ++ ++ return 0; ++} ++ ++static struct platform_driver lq_spi_driver = { ++ .driver = { ++ .name = "ltq-spi", ++ .owner = THIS_MODULE, ++ }, ++ .remove = __exit_p(lq_spi_remove), ++}; ++ ++static int __init lq_spi_init(void) ++{ ++ return platform_driver_probe(&lq_spi_driver, lq_spi_probe); ++} ++module_init(lq_spi_init); ++ ++static void __exit lq_spi_exit(void) ++{ ++ platform_driver_unregister(&lq_spi_driver); ++} ++module_exit(lq_spi_exit); ++ ++MODULE_DESCRIPTION("Lantiq SoC SPI controller driver"); ++MODULE_AUTHOR("Daniel Schwierzeck "); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:ltq-spi"); diff --git a/target/linux/lantiq/patches/942-spi3.patch b/target/linux/lantiq/patches/942-spi3.patch new file mode 100644 index 0000000000..c09125f66a --- /dev/null +++ b/target/linux/lantiq/patches/942-spi3.patch @@ -0,0 +1,66 @@ +From: Daniel Schwierzeck +Date: Thu, 3 Mar 2011 20:42:26 +0000 (+0100) +Subject: MIPS: lantiq: Add device register helper for SPI controller and devices +X-Git-Url: http://nbd.name/gitweb.cgi?p=lantiq.git;a=commitdiff_plain;h=b35b07062b718ece9b9cb7b23b12d83a087eafb0;hp=653c95b8b9066c9c6ac08bd64d0ceee439e9fd90 + +MIPS: lantiq: Add device register helper for SPI controller and devices + +Signed-off-by: Daniel Schwierzeck +--- + +--- a/arch/mips/lantiq/xway/devices.c ++++ b/arch/mips/lantiq/xway/devices.c +@@ -22,6 +22,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -332,5 +333,27 @@ + lantiq_emulate_madwifi_eep = 1; + } + ++static struct resource lq_spi_resources[] = { ++ { ++ .start = LQ_SSC_BASE_ADDR, ++ .end = LQ_SSC_BASE_ADDR + LQ_SSC_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ IRQ_RES(spi_tx, LQ_SSC_TIR), ++ IRQ_RES(spi_rx, LQ_SSC_RIR), ++ IRQ_RES(spi_err, LQ_SSC_EIR), ++}; + ++static struct platform_device lq_spi = { ++ .name = "ltq-spi", ++ .resource = lq_spi_resources, ++ .num_resources = ARRAY_SIZE(lq_spi_resources), ++}; + ++void __init lq_register_spi(struct lq_spi_platform_data *pdata, ++ struct spi_board_info const *info, unsigned n) ++{ ++ spi_register_board_info(info, n); ++ lq_spi.dev.platform_data = pdata; ++ platform_device_register(&lq_spi); ++} +--- a/arch/mips/lantiq/xway/devices.h ++++ b/arch/mips/lantiq/xway/devices.h +@@ -11,6 +11,7 @@ + + #include + #include ++#include + + extern void __init lq_register_gpio(void); + extern void __init lq_register_gpio_stp(void); +@@ -25,5 +26,7 @@ + extern void __init lq_register_asc(int port); + extern void __init lq_register_gpio_buttons(struct gpio_button *buttons, int cnt); + extern void __init lq_register_crypto(const char *name); ++extern void lq_register_spi(struct lq_spi_platform_data *pdata, ++ struct spi_board_info const *info, unsigned n); + + #endif diff --git a/target/linux/lantiq/xway/config-default b/target/linux/lantiq/xway/config-default index bb4298deab..bcd0521dca 100644 --- a/target/linux/lantiq/xway/config-default +++ b/target/linux/lantiq/xway/config-default @@ -19,4 +19,9 @@ CONFIG_LANTIQ_PROM_ASC1=y CONFIG_RTL8306_PHY=y # CONFIG_SOC_LANTIQ_FALCON is not set CONFIG_SOC_LANTIQ_XWAY=y +CONFIG_SPI=y +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_LANTIQ=y +CONFIG_SPI_MASTER=y CONFIG_USB_SUPPORT=y -- 2.30.2