From 1db9c753f7aac4f80ad635332228a19a13c42759 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 2 Jun 2016 15:50:11 +0800 Subject: [PATCH] ARM: dts: sun8i-h3: Add dts file for Sinovoip BPI-M2+ The BPI-M2+ is an H3 development board. It is a smaller form factor than the original BPI-M2, with the new H3 SoC. It has 1GB DRAM, 8GB eMMC, a micro SD card slot, HDMI output, 2 USB host connector and 1 USB OTG connector, an IR receiver, WiFi+BT based on Ampak AP6212. The board also has a 3 pin header for (debug) UART, a 40 pin GPIO header based on the Raspberry Pi B+, but the peripheral signals are not the same, and an FPC connector for connecting BPI's camera. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 3 +- .../dts/sun8i-h3-sinovoip-bpi-m2-plus.dts | 195 ++++++++++++++++++ 2 files changed, 197 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 06b6c2d695bf..970e9064f56d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -765,7 +765,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-one.dtb \ sun8i-h3-orangepi-pc.dtb \ - sun8i-h3-orangepi-plus.dtb + sun8i-h3-orangepi-plus.dtb \ + sun8i-h3-sinovoip-bpi-m2-plus.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb diff --git a/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts new file mode 100644 index 000000000000..d21bc57ce140 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts @@ -0,0 +1,195 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Sinovoip BPI-M2+"; + compatible = "sinovoip,bpi-m2+", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_led_bpi_m2p>; + + pwr_led { + label = "bpi-m2+:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_bpi_m2p>; + + sw4 { + label = "power"; + linux,code = ; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en_bpi_m2p>; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&r_pio { + pwr_led_bpi_m2p: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + sw_r_bpi_m2p: key_pins@0 { + allwinner,pins = "PL3"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + wifi_en_bpi_m2p: wifi_en_pin { + allwinner,pins = "PL7"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is on as long as VCC-IO is on */ + status = "okay"; +}; -- 2.30.2