From 1d3ea7874df420ab8d3acbddf5ec9251bf79ed9b Mon Sep 17 00:00:00 2001 From: Daniel Gimpelevich Date: Mon, 6 Aug 2018 10:52:28 -0700 Subject: [PATCH] ramips: fix BR-6478ACv2 support The wholesale changes introduced in commit f9b8328 missed this DTS file because it hadn't been merged yet. This patch brings it in line to match the other mt7620a devices' DTS files. Additionally, the Internet LED is now labeled correctly and set to unused by default, since the WAN interface is not known in every configuration. Using sysupgrade between images before and after this commit will require the -F flag. Tested-by: Rohan Murch Signed-off-by: Daniel Gimpelevich [drop internet led default setting] Signed-off-by: Mathias Kresin --- .../ramips/base-files/etc/board.d/01_leds | 10 +- .../ramips/base-files/etc/board.d/02_network | 18 ++-- target/linux/ramips/base-files/lib/ramips.sh | 3 - .../ramips/base-files/lib/upgrade/platform.sh | 2 +- target/linux/ramips/dts/BR-6478AC-V2.dts | 92 +++++++++---------- target/linux/ramips/image/mt7620.mk | 6 +- 6 files changed, 61 insertions(+), 70 deletions(-) diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 5d833e4410..b64e9d14c5 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -86,12 +86,6 @@ asl26555-16M) bc2) set_usb_led "$boardname:blue:usb" ;; -br-6478ac-v2) - ucidef_set_led_default "power" "POWER" "$boardname:white:power" "1" - ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2" - set_wifi_led "$boardname:blue:wlan" - set_usb_led "$boardname:blue:usb" - ;; broadway) set_usb_led "$boardname:red:diskmounted" set_wifi_led "$boardname:red:wps_active" @@ -185,6 +179,10 @@ vr500) dir-860l-b1) ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2" ;; +edimax,br-6478ac-v2) + set_wifi_led "$boardname:blue:wlan" + set_usb_led "$boardname:blue:usb" + ;; ex2700|\ wn3000rpv3) set_wifi_led "$boardname:green:router" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 28bf815ee9..3ae01448b5 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -283,6 +283,11 @@ ramips_setup_interfaces() ucidef_add_switch "switch1" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; + edimax,br-6478ac-v2|\ + tplink,c2-v1) + ucidef_add_switch "switch1" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; hc5*61|\ y1s) ucidef_add_switch "switch0" \ @@ -342,11 +347,6 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0" ;; - br-6478ac-v2|\ - tplink,c2-v1) - ucidef_add_switch "switch1" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" - ;; tplink,tl-wr902ac-v3) ucidef_add_switch "switch0" \ "4:lan" "6@eth0" @@ -448,10 +448,6 @@ ramips_setup_macs() lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(mtd_get_mac_binary devdata 7) ;; - br-6478ac-v2) - lan_mac=$(cat /sys/class/net/eth0/address) - wan_mac=$(macaddr_add "$lan_mac" 2) - ;; cy-swr1100|\ dch-m225) lan_mac=$(mtd_get_mac_ascii factory lanmac) @@ -472,6 +468,10 @@ ramips_setup_macs() e1700) wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR) ;; + edimax,br-6478ac-v2) + lan_mac=$(cat /sys/class/net/eth0/address) + wan_mac=$(macaddr_add "$lan_mac" 2) + ;; elecom,wrc-1167ghbk2-s|\ elecom,wrc-2533gst|\ sk-wb8) diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 986fbdc527..5741cbd2ee 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -82,9 +82,6 @@ ramips_board_detect() { *"BR-6475nD") name="br-6475nd" ;; - *"BR-6478AC v2") - name="br-6478ac-v2" - ;; *"Broadway") name="broadway" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 51691e30fb..a46925a43b 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -241,7 +241,7 @@ platform_check_image() { 3g-6200n|\ 3g-6200nl|\ br-6475nd|\ - br-6478ac-v2) + edimax,br-6478ac-v2) [ "$magic" != "43535953" ] && { echo "Invalid image type." return 1 diff --git a/target/linux/ramips/dts/BR-6478AC-V2.dts b/target/linux/ramips/dts/BR-6478AC-V2.dts index d0da5efdcd..b38be1e2c2 100644 --- a/target/linux/ramips/dts/BR-6478AC-V2.dts +++ b/target/linux/ramips/dts/BR-6478AC-V2.dts @@ -32,8 +32,6 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <20>; reset_wps { @@ -50,8 +48,8 @@ label = "br-6478ac-v2:white:power"; gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; }; - wan { - label = "br-6478ac-v2:blue:wan"; + internet { + label = "br-6478ac-v2:blue:internet"; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; }; wlan { @@ -71,7 +69,7 @@ usb-power { gpio-export,name="usb-power"; gpio-export,output=<1>; - gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* pin45 */ + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; }; }; }; @@ -81,45 +79,47 @@ status = "okay"; }; - &spi0 { status = "okay"; - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; + flash@0 { compatible = "jedec,spi-nor"; reg = <0 0>; - linux,modalias = "m25p80", "mx25l6405d"; spi-max-frequency = <10000000>; - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "cimage"; - reg = <0x50000 0x20000>; - read-only; - }; - - partition@70000 { - label = "firmware"; - reg = <0x00070000 0x00790000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "cimage"; + reg = <0x50000 0x20000>; + read-only; + }; + + partition@70000 { + label = "firmware"; + reg = <0x00070000 0x00790000>; + }; }; }; }; @@ -127,8 +127,7 @@ &pinctrl { state_default: pinctrl0 { gpio { - ralink,group = "i2c", "uartf", "wdt", "pa", - "ephy", "nd_sd", "wled"; + ralink,group = "i2c", "uartf", "nd_sd"; ralink,function = "gpio"; }; }; @@ -186,23 +185,20 @@ mediatek,port4 = "gmac"; }; - &wmac { ralink,mtd-eeprom = <&factory 0>; }; &pcie { status = "okay"; +}; - pcie-bridge { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - device_type = "pci"; - mediatek,mtd-eeprom = <&factory 0x8000>; - mediatek,2ghz = <0>; - }; +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; }; - }; &ehci { diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 0edea9f13c..c759a89f24 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -475,7 +475,7 @@ define Device/tiny-ac endef TARGET_DEVICES += tiny-ac -define Device/br-6478ac-v2 +define Device/edimax_br-6478ac-v2 DTS := BR-6478AC-V2 DEVICE_TITLE := Edimax BR-6478AC V2 BLOCKSIZE := 64k @@ -483,9 +483,9 @@ define Device/br-6478ac-v2 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \ edimax-header -s CSYS -m RN68 -f 0x70000 -S 0x01100000 | pad-rootfs | \ append-metadata | check-size $$$$(IMAGE_SIZE) - DEVICE_PACKAGES := kmod-mt76 + DEVICE_PACKAGES := kmod-mt76 kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport endef -TARGET_DEVICES += br-6478ac-v2 +TARGET_DEVICES += edimax_br-6478ac-v2 define Device/tplink_c2-v1 $(Device/Archer) -- 2.30.2