From 1d3e71bd9710593cc0d7216b0ce9898b8e89aeef Mon Sep 17 00:00:00 2001
From: Nick Hainke <vincent@systemli.org>
Date: Thu, 4 May 2023 21:13:33 +0200
Subject: [PATCH] treewide: remove files for building 5.10 kernel

All targets are bumped to 5.15. Remove the old 5.10 patches, configs
and files using:

  find target/linux -iname '*-5.10' -exec rm -r {} \;

Further, remove the 5.10 include.

Signed-off-by: Nick Hainke <vincent@systemli.org>
---
 include/kernel-5.10                           |     2 -
 target/linux/apm821xx/config-5.10             |   244 -
 .../100-dwc2-disable-powerdown.patch          |    29 -
 .../201-add-amcc-apollo3g-support.patch       |    30 -
 .../300-fix-atheros-nics-on-apm82181.patch    |    51 -
 .../301-fix-memory-map-wndr4700.patch         |    14 -
 .../802-usb-xhci-force-msi-renesas-xhci.patch |    53 -
 ...03-hwmon-tc654-add-detection-routine.patch |    65 -
 ...mon-tc654-add-thermal_cooling-device.patch |   166 -
 ...per-force-gzip-as-mkimage-s-compress.patch |    29 -
 target/linux/archs38/config-5.10              |   277 -
 target/linux/armvirt/32/config-5.10           |    75 -
 target/linux/armvirt/64/config-5.10           |   154 -
 target/linux/armvirt/config-5.10              |   155 -
 .../101-ARM-at91-build-dtb-for-q5xr5.patch    |    10 -
 ...s-clock-at91-add-sama7g5-pll-defines.patch |    65 -
 ...-allow-SYS-and-CPU-PLLs-to-be-export.patch |    41 -
 ...aster-add-5th-divisor-for-mck-master.patch |    42 -
 ...-add-5th-divisor-for-mck0-layout-and.patch |    36 -
 ...9x60-pll-allow-runtime-changes-for-p.patch |   510 -
 ...-remove-mck0-from-parent-list-of-oth.patch |   196 -
 ...5-decrease-lower-limit-for-MCK0-rate.patch |    30 -
 ...-do-not-allow-cpu-pll-to-go-higher-t.patch |   221 -
 ...91-clk-master-re-factor-master-clock.patch |  1230 --
 ...-clk-at91-sama7g5-register-cpu-clock.patch |    65 -
 ...91-Fix-the-declaration-of-the-clocks.patch |   181 -
 ...ial-typo-fixes-in-the-file-sama7g5.c.patch |    45 -
 ...-remove-all-kernel-doc-kernel-doc-wa.patch |    90 -
 ...serio-bits-as-platform-configuration.patch |   179 -
 ...capability-to-not-set-the-clock-rate.patch |    85 -
 ...-function-to-disable-all-macb-clocks.patch |    82 -
 ...-unprepare-clocks-in-case-of-failure.patch |    60 -
 ...dd-support-for-sama7g5-gem-interface.patch |    54 -
 ...d-support-for-sama7g5-emac-interface.patch |    39 -
 ...-ASoC-pcm5102a-Make-codec-selectable.patch |    28 -
 ...i2s-do-not-warn-if-muxclk-is-missing.patch |    30 -
 ...egulator-mcp16502-add-linear_min_sel.patch |    25 -
 ...02-adapt-for-get-set-on-other-regist.patch |   117 -
 ...-mcp16502-add-support-for-ramp-delay.patch |   141 -
 ...02-remove-void-documentation-of-stru.patch |    27 -
 ...alidate-selector-against-linear_min_.patch |    64 -
 ...re-do-not-continue-if-selector-match.patch |    26 -
 ...eturn-zero-for-selectors-lower-than-.patch |    64 -
 ...02-lpm-pin-can-be-optional-on-some-p.patch |    30 -
 ...4-add-support-for-fewer-lines-on-las.patch |    70 -
 ...ac-adapt-perid-for-mem2mem-operation.patch |    50 -
 ...ac-add-support-for-sama7g5-based-at_.patch |   280 -
 ...ac-add-AXI-priority-support-and-reco.patch |   113 -
 ...t-usage-of-MACB_CAPS_CLK_HW_CHG-flag.patch |    45 -
 ...0-SiP-types-added-to-soc-description.patch |    43 -
 .../137-drivers-soc-atmel-use-GENMASK.patch   |    25 -
 ...l-fix-__initconst-should-be-placed-a.patch |    26 -
 ...l-add-per-soc-id-and-version-match-m.patch |   348 -
 ...rs-soc-atmel-add-support-for-sama7g5.patch |    87 -
 ...oc-atmel-add-spdx-license-identifier.patch |    49 -
 ...drivers-soc-atmel-fix-type-for-same7.patch |    28 -
 ...ers-timer-microchip-pit64b-Add-clock.patch |   173 -
 ...dc-Use-managed-DMA-buffer-allocation.patch |   135 -
 ...-sama5d2_shdwc-add-support-for-sama7.patch |   141 -
 ...-at91-pio4-add-support-for-slew-rate.patch |   121 -
 ...4-fix-Prefer-unsigned-int-to-bare-us.patch |   340 -
 ...ault-usrio-config-to-default-gem-con.patch |    58 -
 ...-prototypes-to-mutually-included-hea.patch |   108 -
 ...p-i2s-mcc-Add-compatible-for-SAMA7G5.patch |    46 -
 ...c-Add-multi-channel-support-for-I2S-.patch |   113 -
 ...s-mcc-Add-support-to-select-TDM-pins.patch |   108 -
 ...-ASoC-mchp-i2s-mcc-Add-FIFOs-support.patch |   187 -
 ...-at91-pio4-Fix-slew-rate-disablement.patch |    49 -
 ...-media-atmel-properly-get-pm_runtime.patch |   159 -
 ...l-isc-Remove-redundant-assignment-to.patch |    32 -
 ...l-isc-specialize-gamma-table-into-pr.patch |   187 -
 ...l-isc-specialize-driver-name-constan.patch |    70 -
 ...l-isc-add-checks-for-limiting-frame-.patch |    45 -
 ...l-isc-specialize-max-width-and-max-h.patch |   131 -
 ...a-atmel-atmel-isc-specialize-dma-cfg.patch |    60 -
 ...l-isc-extract-CSC-submodule-config-i.patch |    94 -
 ...l-isc-base-add-id-to-clock-debug-mes.patch |    28 -
 ...l-isc-create-register-offsets-struct.patch |   115 -
 ...l-isc-extract-CBC-submodule-config-i.patch |    80 -
 ...l-isc-add-CBC-to-the-reg-offsets-str.patch |    82 -
 ...l-isc-add-SUB422-and-SUB420-to-regis.patch |    80 -
 ...tmel-isc-add-RLP-to-register-offsets.patch |    74 -
 ...tmel-isc-add-HIS-to-register-offsets.patch |    99 -
 ...tmel-isc-add-DMA-to-register-offsets.patch |   110 -
 ...l-isc-add-support-for-version-regist.patch |    77 -
 ...l-isc-add-his_entry-to-register-offs.patch |    71 -
 ...l-isc-add-register-description-for-a.patch |    99 -
 ...l-isc-extend-pipeline-with-extra-mod.patch |   104 -
 ...l-isc-add-CC-initialization-function.patch |    83 -
 ...l-isc-create-product-specific-v4l2-c.patch |    86 -
 ...l-isc-create-callback-for-DPC-submod.patch |    75 -
 ...l-isc-create-callback-for-GAM-submod.patch |    75 -
 ...l-isc-create-callback-for-RLP-submod.patch |    95 -
 ...l-isc-move-the-formats-list-into-pro.patch |   440 -
 ...l-isc-create-an-adapt-pipeline-callb.patch |    89 -
 ...l-isc-regs-add-additional-fields-for.patch |    55 -
 ...l-isc-base-add-support-for-more-form.patch |   145 -
 ...l-isc-sama5d2-remove-duplicate-defin.patch |    26 -
 ...-atmel-isc-add-microchip-xisc-driver.patch |   810 --
 ...186-ASoC-atmel-fix-shadowed-variable.patch |    48 -
 ...el-i2s-remove-useless-initialization.patch |    36 -
 ...-atmel-i2s-Set-symmetric-sample-bits.patch |    26 -
 ...a5d4_wdt-add-support-for-sama7g5-wdt.patch |    46 -
 ...tmel-fix-build-when-ISC-m-and-XISC-y.patch |   135 -
 ...191-i2c-at91-remove-define-CONFIG_PM.patch |    76 -
 ...3x-add-support-for-96kHz-and-192kHz-.patch |    91 -
 ...el-atmel-sama5d2-isc-fix-YUYV-format.patch |    48 -
 ...ister-definition-for-sama7g5-s-maste.patch |    51 -
 .../195-ARM-at91-add-new-SoC-sama7g5.patch    |    49 -
 ...bug-add-sama7g5-low-level-debug-uart.patch |    50 -
 ...-move-pm_bu-to-soc_pm-data-structure.patch |    87 -
 ...ove-the-setup-of-soc_pm.bu-suspended.patch |    55 -
 ...91-pm-document-at91_soc_pm-structure.patch |    31 -
 ...k-for-different-controllers-in-at91_.patch |   238 -
 ...1-ARM-at91-pm-do-not-initialize-pdev.patch |    25 -
 ...2-ARM-at91-pm-use-r7-instead-of-tmp1.patch |    60 -
 ...d-push-and-pop-on-stack-while-memory.patch |   467 -
 ...NFIG_SOC_SAM9X60-CONFIG_HAVE_AT91_SA.patch |    36 -
 ...91-pm-add-support-for-waiting-MCK1.4.patch |   150 -
 ...dd-sfrbu-registers-definitions-for-s.patch |    53 -
 ...-registers-definitions-for-sama7g5-s.patch |    99 -
 ...add-self-refresh-support-for-sama7g5.patch |   274 -
 ...support-for-MCK1.4-save-restore-for-.patch |   165 -
 ...support-for-2.5V-LDO-regulator-contr.patch |    79 -
 ...-at91-pm-wait-for-ddr-power-mode-off.patch |    28 -
 ...M-at91-pm-add-sama7g5-ddr-controller.patch |    40 -
 ...91-pm-add-sama7g5-ddr-phy-controller.patch |    94 -
 ...-ddr-phy-calibration-data-to-securam.patch |   151 -
 ...-add-backup-mode-support-for-SAMA7G5.patch |    52 -
 .../216-ARM-at91-pm-add-sama7g5-s-pmc.patch   |    36 -
 ...t91-sama7-introduce-sama7-SoC-family.patch |    63 -
 ...M-at91-pm-add-pm-support-for-SAMA7G5.patch |    96 -
 .../219-ARM-at91-pm-add-sama7g5-shdwc.patch   |    24 -
 ...-add-defconfig-for-sama7-family-of-S.patch |   233 -
 ...M-multi_v7_defconfig-add-sama7g5-SoC.patch |    33 -
 ...91-add-sama7g5-SoC-DT-and-sama7g5-ek.patch |  2154 ---
 ...ot-panic-if-ram-controllers-are-not-.patch |    74 -
 ...dts-at91-sama7g5-add-ram-controllers.patch |    36 -
 ...RM-dts-at91-sama7g5-add-securam-node.patch |    34 -
 ...-ARM-dts-at91-sama7g5-add-shdwc-node.patch |    53 -
 .../227-ARM-dts-at91-sama7g5-add-chipid.patch |    28 -
 ...ch-backup-area-to-vbat-in-backup-mod.patch |   117 -
 ...a7g5ek-add-suspend-voltage-for-ddr3l.patch |    42 -
 ...roup-constants-and-addresses-loading.patch |    48 -
 ...oad-base-address-of-controllers-in-t.patch |    93 -
 ...a7g5ek-use-proper-slew-rate-settings.patch |    85 -
 ...a7g5ek-to-not-touch-slew-rate-for-SD.patch |    73 -
 ...at91-re-factor-clocks-suspend-resume.patch |  1342 --
 ...cute-suspend-resume-only-for-backup-.patch |    89 -
 ...ma7g5-add-securam-s-peripheral-clock.patch |    25 -
 ...ter-add-register-definition-for-sama.patch |   124 -
 ...ter-improve-readability-by-using-loc.patch |    40 -
 ...-sama7g5-to-the-list-of-available-pm.patch |    39 -
 ...-master-check-if-div-or-pres-is-zero.patch |    39 -
 ...master-mask-mckr-against-layout-mask.patch |    46 -
 ...-at91-clk-master-fix-prescaler-logic.patch |    29 -
 ...9x60-pll-add-notifier-for-div-part-o.patch |   312 -
 ...-clk-master-add-notifier-for-divider.patch |   519 -
 ...-remove-prescaler-part-of-master-clo.patch |    45 -
 ...a7g5-set-low-limit-for-mck0-at-32KHz.patch |    26 -
 ...core_get_rate_recalc-in-clk_rate_get.patch |    32 -
 .../99-scripts-fix-compilation-error.patch    |    21 -
 target/linux/at91/sam9x/config-5.10           |   312 -
 target/linux/at91/sama5/config-5.10           |   488 -
 target/linux/at91/sama7/config-5.10           |   396 -
 target/linux/ath25/config-5.10                |   128 -
 .../ath25/patches-5.10/107-ar5312_gpio.patch  |   212 -
 .../ath25/patches-5.10/108-ar2315_gpio.patch  |   363 -
 .../patches-5.10/110-ar2313_ethernet.patch    |  1735 ---
 .../ath25/patches-5.10/120-spiflash.patch     |   631 -
 .../ath25/patches-5.10/130-watchdog.patch     |   277 -
 .../140-redboot_boardconfig.patch             |    60 -
 .../141-redboot_partition_scan.patch          |    44 -
 .../142-redboot_various_erase_size_fix.patch  |    72 -
 .../ath25/patches-5.10/210-reset_button.patch |    71 -
 .../220-enet_micrel_workaround.patch          |   111 -
 .../ath25/patches-5.10/330-board_leds.patch   |   116 -
 .../patches-5.10/700-swconfig_mvswitch.patch  |    23 -
 target/linux/ath79/config-5.10                |   203 -
 ...ds-add-reset-controller-based-driver.patch |   186 -
 .../0004-phy-add-ath79-usb-phys.patch         |   333 -
 ...005-usb-add-more-OF-quirk-properties.patch |    24 -
 ...9-intc-add-irq-cascade-driver-for-QC.patch |   168 -
 ...ip-irq-ath79-cpu-drop-OF-init-helper.patch |    23 -
 ...ngs-PCI-qcom-ar7100-adds-binding-doc.patch |    57 -
 .../0018-MIPS-pci-ar71xx-convert-to-OF.patch  |   202 -
 ...ngs-PCI-qcom-ar7240-adds-binding-doc.patch |    61 -
 .../0020-MIPS-pci-ar724x-convert-to-OF.patch  |   205 -
 .../0032-MIPS-ath79-sanitize-symbols.patch    |    93 -
 .../0033-spi-ath79-drop-pdata-support.patch   |    70 -
 .../0034-MIPS-ath79-ath9k-exports.patch       |    36 -
 ...-MIPS-ath79-remove-irq-code-from-pci.patch |   149 -
 .../patches-5.10/0037-missing-registers.patch |    20 -
 ...9-add-missing-QCA955x-GMAC-registers.patch |    90 -
 ...S-ath79-export-UART1-reference-clock.patch |    67 -
 .../004-register_gpio_driver_earlier.patch    |    26 -
 .../0040-ath79-sgmii-config.patch             |    30 -
 ...or-use-4-bit-locking-for-MX25L12805D.patch |    33 -
 ...ci-ar724x-add-QCA9550-reset-sequence.patch |   130 -
 ...or-support-mtd-name-from-device-tree.patch |    54 -
 ...-ar934x-fix-transfer-and-word-delays.patch |    27 -
 ...3-v5.17-spi-ar934x-fix-transfer-size.patch |    62 -
 .../404-mtd-cybertan-trx-parser.patch         |    45 -
 ...th79-Implement-the-spi_mem-interface.patch |    68 -
 ...ath79-set-number-of-chipselect-lines.patch |    26 -
 .../420-net-use-downstream-ag71xx.patch       |    41 -
 ...425-at803x-allow-sgmii-aneg-override.patch |    32 -
 .../430-drivers-link-spi-before-mtd.patch     |    20 -
 .../440-mtd-ar934x-nand-driver.patch          |    34 -
 ...ath79-swizzle-pci-address-for-ar71xx.patch |   109 -
 .../900-mdio_bitbang_ignore_ta_value.patch    |    44 -
 ...-prevent-rescheduling-during-command.patch |    61 -
 .../910-unaligned_access_hacks.patch          |   903 --
 .../patches-5.10/920-mikrotik-rb4xx.patch     |   121 -
 .../930-ar8216-make-reg-access-atomic.patch   |    59 -
 .../patches-5.10/939-mikrotik-rb91x.patch     |    97 -
 ...th79-add-support-for-booting-QCN550x.patch |    48 -
 target/linux/bcm47xx/config-5.10              |   213 -
 ...XX-Define-Linksys-WRT310N-V2-buttons.patch |    40 -
 ...d-board-entry-for-Linksys-WRT320N-v1.patch |    89 -
 ...dd-LEDs-and-buttons-for-Asus-RTN-10U.patch |    67 -
 ...7XX-Add-support-for-Netgear-R6300-v1.patch |    60 -
 ...d-support-for-Netgear-WN2500RP-v1-v2.patch |    63 -
 ...-Add-support-for-Netgear-WNR3500L-v2.patch |   109 -
 ...7XX-Add-support-for-Linksys-E2500-V3.patch |    65 -
 ...nand-Assign-soc-as-early-as-possible.patch |    33 -
 ...-Allow-SoC-to-provide-I-O-operations.patch |   150 -
 ...mnand-Avoid-pdev-in-brcmnand_init_cs.patch |    52 -
 ...F-operations-out-of-brcmnand_init_cs.patch |    63 -
 ...and-Allow-working-without-interrupts.patch |    91 -
 ...Add-platform-data-structure-for-BCMA.patch |   115 -
 ...and-Allow-platform-data-instantation.patch |   124 -
 ...A-controller-uses-command-shift-of-0.patch |    29 -
 ...8-mtd-rawnand-brcmnand-Add-BCMA-shim.patch |   201 -
 ...47XX-Add-support-for-Huawei-B593u-12.patch |    61 -
 .../bcm47xx/patches-5.10/159-cpu_fixes.patch  |   493 -
 .../patches-5.10/160-kmap_coherent.patch      |    78 -
 .../209-b44-register-adm-switch.patch         |   121 -
 .../patches-5.10/210-b44_phy_fix.patch        |    54 -
 .../280-activate_ssb_support_in_usb.patch     |    25 -
 .../patches-5.10/300-fork_cacheflush.patch    |    21 -
 .../patches-5.10/310-no_highpage.patch        |    74 -
 .../400-mtd-bcm47xxpart-get-nvram.patch       |    34 -
 .../patches-5.10/610-pci_ide_fix.patch        |    41 -
 ...t-to-PHY-even-if-it-is-BGMAC_PHY_NOR.patch |    42 -
 ...t-to-PHY-even-if-it-is-BGMAC_PHY_NOR.patch |    33 -
 .../patches-5.10/791-tg3-no-pci-sleep.patch   |    17 -
 ...f-serial-flashes-with-smaller-blocks.patch |    73 -
 .../patches-5.10/820-wgt634u-nvram-fix.patch  |   296 -
 .../830-huawei_e970_support.patch             |   101 -
 .../patches-5.10/831-old_gpio_wdt.patch       |   360 -
 ...rites-setting-CardBus-bridge-resourc.patch |    30 -
 .../patches-5.10/940-bcm47xx-yenta.patch      |    46 -
 .../976-ssb_increase_pci_delay.patch          |    11 -
 .../bcm47xx/patches-5.10/999-wl_exports.patch |    24 -
 target/linux/bcm4908/config-5.10              |   234 -
 .../drivers/net/ethernet/broadcom/unimac.h    |    68 -
 ...gs-arm-bcm-document-BCM4908-bindings.patch |    60 -
 ...om-add-BCM4908-and-Asus-GT-AC5300-ea.patch |   307 -
 ...add-config-for-Broadcom-BCM4908-SoCs.patch |    44 -
 ...-bcm-document-Netgear-R8000P-binding.patch |    28 -
 ...om-bcm4908-add-BCM4906-Netgear-R8000.patch |   104 -
 ...dcom-bcm4908-use-proper-NAND-binding.patch |    32 -
 ...om-bcm4908-describe-PCIe-reset-contr.patch |    41 -
 ...com-bcm4908-describe-internal-switch.patch |   184 -
 ...-broadcom-bcm4908-describe-PMB-block.patch |    50 -
 ...ts-broadcom-bcm4908-describe-USB-PHY.patch |   134 -
 ...om-bcm4908-describe-Ethernet-control.patch |    51 -
 ...om-bcm4908-describe-Netgear-R8000P-s.patch |    50 -
 ...om-bcm4908-add-remaining-Netgear-R80.patch |    81 -
 ...om-bcm4908-describe-firmware-partiti.patch |    55 -
 ...om-bcm4908-fix-switch-parent-node-na.patch |    30 -
 ...bcm-document-TP-Link-Archer-C2300-bi.patch |    27 -
 ...om-bcm4908-add-TP-Link-Archer-C2300-.patch |   212 -
 ...om-bcm4908-set-Asus-GT-AC5300-port-7.patch |    28 -
 ...broadcom-bcm4908-add-Ethernet-TX-irq.patch |    30 -
 ...oadcom-bcm4908-add-Ethernet-MAC-addr.patch |    82 -
 ...RM-dts-BCM5301X-Fix-NAND-nodes-names.patch |    25 -
 ...-broadcom-bcm4908-Fix-NAND-node-name.patch |    27 -
 ...om-bcm4908-Move-reboot-syscon-out-of.patch |    38 -
 ...broadcom-bcm4908-Fix-UART-clock-name.patch |    28 -
 ...bcm-document-Netgear-RAXE500-binding.patch |    27 -
 ...om-bcm4908-add-DT-for-Netgear-RAXE50.patch |    81 -
 ...adcom-bcm4908-use-proper-TWD-binding.patch |    47 -
 ...broadcom-bcm4908-add-pinctrl-binding.patch |   160 -
 ...-broadcom-bcm4908-add-watchdog-block.patch |    35 -
 ...4-dts-broadcom-bcm4908-add-I2C-block.patch |    34 -
 ...dd-DTS-files-for-bcmbca-SoC-BCM63158.patch |   199 -
 ...Add-DTS-files-for-bcmbca-SoC-BCM4912.patch |   191 -
 ...Add-DTS-files-for-bcmbca-SoC-BCM6858.patch |   184 -
 ...dd-DTS-files-for-bcmbca-SoC-BCM63146.patch |   174 -
 ...Add-DTS-files-for-bcmbca-SoC-BCM6856.patch |   167 -
 ...Add-DTS-files-for-bcmbca-SoC-BCM6813.patch |   192 -
 ...om-align-gpio-key-node-names-with-dt.patch |    79 -
 ...om-bcm4908-Fix-timer-node-for-BCM490.patch |    33 -
 ...om-bcm4908-Fix-cpu-node-for-smp-boot.patch |    28 -
 ...se-DTS-file-for-bcmbca-device-Asus-G.patch |    54 -
 ...bcmbca-add-arch-bcmbca-machine-entry.patch |    31 -
 ...adcom-bcm4908-add-remaining-LED-pins.patch |   115 -
 ...om-bcm4908-add-LEDs-controller-block.patch |    35 -
 ...dcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch |    81 -
 ...cmbca-update-BCM4908-board-dts-files.patch |    66 -
 ...ts-Move-BCM4908-dts-to-bcmbca-folder.patch |  2491 ----
 ...64-dts-Add-BCM4908-generic-board-dts.patch |    62 -
 ...om-bcmbca-bcm4908-add-TWD-block-time.patch |    31 -
 ...roadcom-bcmbca-bcm6858-add-TWD-block.patch |    46 -
 ...Update-cache-properties-for-broadcom.patch |   134 -
 ...parsers-add-Broadcom-s-U-Boot-parser.patch |   137 -
 ...adcom-bcmbca-Add-spi-controller-node.patch |   367 -
 ...om-bcmbca-bcm4908-fix-NAND-interrupt.patch |    33 -
 ...com-bcmbca-bcm4908-fix-LED-nodenames.patch |    66 -
 ...om-bcmbca-bcm4908-fix-procmon-nodena.patch |    30 -
 ...om-bcmbca-bcm4908-add-on-SoC-USB-por.patch |    81 -
 ...om-bcmbca-bcm4908-add-Netgear-R8000P.patch |    38 -
 ...om-bcmbca-bcm4908-add-TP-Link-C2300-.patch |    41 -
 ...-support-BCM4908-s-integrated-switch.patch |   141 -
 ...-use-2-Gbps-IMP-port-link-on-BCM4908.patch |    33 -
 ...document-BCM4908-Ethernet-controller.patch |    65 -
 ...4908enet-add-BCM4908-controller-driv.patch |   847 --
 ...-net-rename-BCM4908-Ethernet-binding.patch |   128 -
 ...bcm4908-enet-include-ethernet-contro.patch |    32 -
 ...ame-BCM4908-driver-update-DT-binding.patch |  1614 ---
 ...om-bcm4908_enet-drop-unneeded-memset.patch |    30 -
 ...4908_enet-drop-inline-from-C-functio.patch |    75 -
 ...roadcom-bcm4908_enet-fix-minor-typos.patch |    60 -
 ...bcm4908_enet-fix-received-skb-length.patch |    28 -
 ...4908_enet-fix-endianness-in-xmit-cod.patch |    28 -
 ...4908_enet-set-MTU-on-open-on-request.patch |   119 -
 ...4908_enet-fix-RX-path-possible-mem-l.patch |    30 -
 ...4908_enet-fix-NAPI-poll-returned-val.patch |    31 -
 ...4908_enet-enable-RX-after-processing.patch |    34 -
 ...4908_ENET-should-not-default-to-y-un.patch |    33 -
 ...oadcom-bcm4908_enet-read-MAC-from-OF.patch |    38 -
 ...bcm4908-enet-add-optional-TX-interru.patch |    50 -
 ...om-bcm4908_enet-support-TX-interrupt.patch |   300 -
 ...store-PHY-interface-mode-in-port-str.patch |    73 -
 ..._sf2-setup-BCM4908-internal-crossbar.patch |   152 -
 ...-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch |    25 -
 ...-add-function-finding-RGMII-register.patch |   161 -
 ...-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch |    56 -
 ...Fix-bcm_sf2_reg_rgmii_cntrl-call-for.patch |    46 -
 ...dsa-bcm_sf2-refactor-LED-regs-access.patch |   209 -
 ...4908_enet-reset-DMA-rings-sw-indexes.patch |    45 -
 ...4908enet-remove-redundant-variable-b.patch |    34 -
 ...4908_enet-handle-EPROBE_DEFER-when-g.patch |    55 -
 ...4908_enet-update-TX-stats-after-actu.patch |    65 -
 ...-broadcom-bcm4908_enet-use-build_skb.patch |   152 -
 ...4908_enet-report-queued-and-transmit.patch |    45 -
 ...al-bcm63xx-lower-driver-dependencies.patch |    31 -
 ...-BCM4908-MISC-PCIe-reset-controller-.patch |    40 -
 ...ower-document-Broadcom-s-PMB-binding.patch |    90 -
 ...bcm-add-PM-driver-for-Broadcom-s-PMB.patch |   409 -
 ...b-add-stubs-for-getting-platform-IDs.patch |    63 -
 ...ctrl-Add-binding-for-BCM4908-pinctrl.patch |   111 -
 ...rl-bcm-add-driver-for-BCM4908-pinmux.patch |   629 -
 ...usb-improve-getting-OF-matching-data.patch |    49 -
 ...-specify-init-function-format-at-str.patch |    50 -
 ...brcm-brcmstb-usb-phy-convert-to-the-.patch |   315 -
 ...brcm-brcmstb-usb-phy-add-BCM4908-bin.patch |    41 -
 ...-brcm-usb-support-PHY-on-the-BCM4908.patch |    48 -
 ...b-select-SOC_BRCMSTB-on-brcmstb-only.patch |    35 -
 ...brcm-brcmstb-usb-phy-add-power-domai.patch |    31 -
 ...c-brcmstb-allow-compiling-on-BCM4908.patch |    30 -
 ...y-phy-brcm-usb-fixup-BCM4908-support.patch |   147 -
 ...low-building-BCM7038_WDT-for-BCM4908.patch |    32 -
 ..._wdt-Support-BCM6345-compatible-stri.patch |    34 -
 ...om-bcmbca-bcm4908-limit-amount-of-GP.patch |    23 -
 ...wnand-brcmnand-disable-WP-on-BCM4908.patch |    34 -
 ...m_sf2-enable-GPHY-for-switch-probing.patch |    46 -
 ...sf2-keep-GPHY-enabled-on-the-BCM4908.patch |    30 -
 target/linux/bcm53xx/config-5.10              |   308 -
 ...-Linksys-EA9500-add-port-5-and-port-.patch |    47 -
 ...1X-Harmonize-EHCI-OHCI-DT-nodes-name.patch |    60 -
 ...CM5310X-Harmonize-xHCI-DT-nodes-name.patch |    29 -
 ...-Linksys-EA9500-add-fixed-partitions.patch |    71 -
 ...-Use-corretc-pinctrl-compatible-for-.patch |    49 -
 ...X-Linksys-EA9500-make-use-of-pinctrl.patch |    61 -
 ...01X-Move-CRU-devices-to-the-CRU-node.patch |    85 -
 ...-Disable-USB-3-PHY-on-devices-withou.patch |    94 -
 ...X-Enable-USB-3-PHY-on-Luxul-XWR-3150.patch |    30 -
 ...01X-Update-Ethernet-switch-node-name.patch |    32 -
 ...-Add-a-default-compatible-for-switch.patch |    82 -
 ...-Provide-defaults-ports-container-no.patch |   180 -
 ...NSP-Update-ethernet-switch-node-name.patch |    32 -
 ...-Ethernet-switch-SGMII-register-name.patch |    26 -
 ...a-SRAB-compatible-string-for-each-bo.patch |    77 -
 ...rovide-defaults-ports-container-node.patch |    99 -
 ...-Describe-NVMEM-NVRAM-on-Linksys-Lux.patch |   136 -
 ...M5301X-Fix-Linksys-EA9500-partitions.patch |    60 -
 ...CM5301X-Set-Linksys-EA9500-power-LED.patch |    27 -
 ...RM-dts-BCM5301X-Fix-NAND-nodes-names.patch |    77 -
 ...s-BCM5301X-Fix-pinmux-subnodes-names.patch |    52 -
 ...s-NSP-add-device-names-to-compatible.patch |    97 -
 ...RM-dts-NSP-enable-DMA-on-bcm988312hr.patch |    29 -
 ...dts-NSP-disable-qspi-node-by-default.patch |   113 -
 ...dts-NSP-add-MDIO-bus-controller-node.patch |    30 -
 ...P-Move-USB3-PHY-to-internal-MDIO-bus.patch |    85 -
 ...SP-Add-common-bindings-for-MX64-MX65.patch |   148 -
 ...ts-NSP-Add-Ax-stepping-modifications.patch |    90 -
 ...-Add-DT-files-for-Meraki-MX64-series.patch |   340 -
 ...-Add-DT-files-for-Meraki-MX65-series.patch |   386 -
 ...010-ARM-dts-BCM5301X-Fix-nodes-names.patch |    70 -
 ...RM-dts-BCM5301X-Fix-MDIO-mux-binding.patch |    28 -
 ...SP-Add-bcm958623hr-board-name-to-dts.patch |    27 -
 ...-ARM-dts-NSP-Fix-MDIO-mux-node-names.patch |    47 -
 ...s-NSP-Fix-MX64-MX65-eeprom-node-name.patch |    28 -
 ...M-dts-NSP-Fix-MX65-MDIO-mux-warnings.patch |    52 -
 ...-Specify-switch-ports-for-more-devic.patch |   290 -
 ...-Describe-on-SoC-BCM53125-rev-4-swit.patch |    44 -
 ...-BCM53573-Add-Tenda-AC9-switch-ports.patch |    59 -
 ...Specify-switch-ports-for-Meraki-MR32.patch |    57 -
 ...3016-MR32-get-mac-address-from-nvmem.patch |    41 -
 ...ts-BCM5301X-Add-DT-for-Asus-RT-AC88U.patch |   242 -
 ...-add-qca8k-falling-edge-PLL-properti.patch |    42 -
 ...-remove-unnecessary-address-size-cel.patch |    29 -
 ...-define-RTL8365MB-switch-on-Asus-RT-.patch |   104 -
 ...2-convert-to-Broadcom-iProc-I2C-Driv.patch |   104 -
 ...CM5301X-update-CRU-block-description.patch |    60 -
 ...-use-non-deprecated-USB-2.0-PHY-bind.patch |    54 -
 ...ts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch |    42 -
 ...08-ARM-dts-NSP-Rename-SATA-unit-name.patch |    25 -
 ...-correct-RX-delay-and-enable-flow-co.patch |    45 -
 ...CM5301X-define-RTL8365MB-switch-on-A.patch |   109 -
 ...-define-RTL8365MB-switch-on-Asus-RT-.patch |   103 -
 ...NSP-MX6X-get-mac-address-from-eeprom.patch |    40 -
 ...-NSP-MX6X-correct-LED-function-types.patch |    62 -
 ...-Add-Ethernet-MAC-address-to-Luxul-X.patch |    42 -
 ...301X-Update-pin-controller-node-name.patch |    32 -
 ...M5301X-Fix-DTC-warning-for-NAND-node.patch |    31 -
 ...-Remove-cell-properties-from-srab-po.patch |    40 -
 ...-Add-rgmii-to-port-5-of-Broadcom-swi.patch |    29 -
 ...-Retrieve-gmac1-MAC-address-from-NVR.patch |    43 -
 ...-Fix-compatible-strings-for-BCM53012.patch |    65 -
 ...-Disable-gmac0-and-enable-port-8-on-.patch |    39 -
 ...BCM5301X-Add-DT-for-WZR-1166DHP-DHP2.patch |   300 -
 ...CM5301X-Fix-DTC-warning-for-NAND-nod.patch |    32 -
 ...-align-gpio-key-node-names-with-dtsc.patch |   912 --
 ...roadcom-correct-gpio-keys-properties.patch |   108 -
 ...-Correct-description-of-TP-Link-part.patch |    99 -
 ...4-Add-devicetree-for-D-Link-DIR-890L.patch |   242 -
 ...-Add-devicetree-for-D-Link-DWL-8610A.patch |   165 -
 .../039-v6.2-bcma-support-SPROM-rev-11.patch  |    28 -
 ...support-updated-DT-binding-with-PHY-.patch |   131 -
 ...-bindings-nvmem-add-Broadcom-s-NVRAM.patch |    56 -
 ...x-parse-firmware-MTD-partitions-only.patch |    43 -
 ...support-for-performing-fake-doorbell.patch |   137 -
 ...able-MMU-and-Dcache-during-decompres.patch |   101 -
 ...-Specify-switch-ports-for-remaining-.patch |   711 -
 ...RM-BCM5301X-Add-DT-for-Netgear-R7900.patch |    64 -
 ...-Extend-RAM-to-full-256MB-for-Linksy.patch |    27 -
 ...-BCM5301X-Describe-partition-formats.patch |    25 -
 ...-mark-and-erase-all-remaining-blocks.patch |    59 -
 .../600-net-disable-GRO-by-default.patch      |    36 -
 ...-frame-size-to-support-just-MTU-1500.patch |    33 -
 ...xx_nvram-support-init-from-IO-memory.patch |    61 -
 ...-provide-NVMEM-content-to-the-NVRAM-.patch |    31 -
 .../905-BCM53573-minor-hacks.patch            |    80 -
 target/linux/gemini/config-5.10               |   416 -
 ...t-fotg2-add-Gemini-specific-handling.patch |   131 -
 ...-DIR-685-partition-table-for-OpenWrt.patch |    37 -
 ...ild-use-Wdeclaration-after-statement.patch |    73 -
 ...05-v5.17-02-Kbuild-move-to-std-gnu11.patch |    60 -
 ...-use-std-gnu11-for-KBUILD_USERCFLAGS.patch |    43 -
 ...dcode-path-to-awk-in-scripts-ld-vers.patch |    30 -
 .../011-kbuild-export-SUBARCH.patch           |    21 -
 ...station-poweroff-add-missing-put_dev.patch |    27 -
 ...-uasm-Enable-muhu-opcode-for-MIPS-R6.patch |    65 -
 ...rkaround-for-Loongson-2F-nop-CPU-err.patch |    31 -
 ...ips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch |  3078 ----
 ...bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch |  1005 --
 ...f-Add-JIT-workarounds-for-CPU-errata.patch |   120 -
 ...0-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch |    61 -
 ...f-Remove-old-BPF-JIT-implementations.patch |   387 -
 ...a-neon-optimize-for-non-block-size-m.patch |   272 -
 ...a-neon-add-missing-counter-increment.patch |    38 -
 ...ut-frequently-used-members-above-cac.patch |    42 -
 ...to-define-reg_update_bits-for-no-bus.patch |    52 -
 ...CPU_MIPS64-for-remaining-MIPS64-CPUs.patch |    36 -
 ...resolve_btfids-Build-with-host-flags.patch |    49 -
 ...boot-put-appended-dtb-into-a-section.patch |    36 -
 ...ow_offload-handle-netdevice-events-f.patch |   106 -
 ...convert-fixed-partitions-to-the-json.patch |   324 -
 ...move-partition-binding-to-its-own-fi.patch |   115 -
 ...d-add-binding-for-BCM4908-partitions.patch |    92 -
 ...art-support-BCM4908-fixed-partitions.patch |   654 -
 ...rt-limit-parsing-of-deprecated-DT-sy.patch |    69 -
 ...rt-make-symbol-bcm4908_partitions_qu.patch |    34 -
 ...em-cells-compatible-to-parse-mtd-as-.patch |    38 -
 ...ings-nvmem-drop-nodename-restriction.patch |    25 -
 ...Document-use-of-nvmem-cells-compatib.patch |   117 -
 ...add-binding-for-Linksys-Northstar-pa.patch |    98 -
 ...rt-support-Linksys-Northstar-partiti.patch |   156 -
 ...0002-Disable-buffered-writes-for-AMD.patch |    54 -
 ...ings-mtd-brcm-trx-Add-brcm-trx-magic.patch |    32 -
 ...Allow-to-specify-brcm-trx-magic-in-D.patch |    50 -
 ...Allow-to-use-TRX-parser-on-Mediatek-.patch |    25 -
 ...x-allow-to-use-on-MediaTek-MIPS-SoCs.patch |    33 -
 ...s-add-support-for-Sercomm-partitions.patch |   301 -
 ...platform_populate-for-MTD-partitions.patch |    72 -
 ...ce-of-support-for-dynamic-partitions.patch |   106 -
 ...g-MTD-device-associated-with-a-speci.patch |    72 -
 ...e-check-partition-before-dereference.patch |    30 -
 ...sing-of_node_get-in-dynamic-partitio.patch |   101 -
 ...y-a-bit-code-find-partition-matching.patch |    65 -
 ...find-OF-node-for-every-MTD-partition.patch |    84 -
 ...T_DEV-for-partitions-marked-as-rootf.patch |    47 -
 ...and-gigadevice-Support-GD5F1GQ5UExxG.patch |   172 -
 ...device-fix-Quad-IO-for-GD5F1GQ5UExxG.patch |    44 -
 ...device-add-support-for-GD5FxGQ4xExxG.patch |    58 -
 ...device-add-support-for-GD5F1GQ5RExxG.patch |    33 -
 ...device-add-support-for-GD5F-2-4-GQ5x.patch |    84 -
 ...device-add-support-for-GD5FxGM7xExxG.patch |    91 -
 ...TP-Link-SafeLoader-partitions-table-.patch |   229 -
 ...9-mtd-spi-nor-support-eon-en25qh256a.patch |    49 -
 ...13-ubifs-default-to-zstd-compression.patch |    25 -
 ...pi-poll-functionality-to-__napi_poll.patch |    88 -
 ...threaded-able-napi-poll-loop-support.patch |   261 -
 ...tribute-to-control-napi-threaded-mod.patch |   177 -
 ...ween-napi-kthread-mode-and-busy-poll.patch |    93 -
 ...up-on-napi_disable-for-threaded-napi.patch |    53 -
 ...2-net-export-dev_set_threaded-symbol.patch |    24 -
 ...table-add-hash-offset-field-to-tuple.patch |    52 -
 ...ble-separate-replace-destroy-and-sta.patch |    98 -
 ...ack-Remove-unused-variable-declarati.patch |    22 -
 ...ble-consolidate-skb_try_make_writabl.patch |   291 -
 ...ble-move-skb_try_make_writable-befor.patch |    35 -
 ...ble-move-FLOW_OFFLOAD_DIR_MAX-away-f.patch |    82 -
 ...wtable-fast-NAT-functions-never-fail.patch |   394 -
 ...ble-call-dst_check-to-fall-back-to-c.patch |    46 -
 ...ble-refresh-timeout-after-dst-and-wr.patch |    49 -
 ...es-update-table-flags-from-the-commi.patch |   103 -
 ...arding-path-from-virtual-netdevice-a.patch |   170 -
 ...lve-forwarding-path-for-vlan-devices.patch |    80 -
 ...ve-forwarding-path-for-bridge-device.patch |    62 -
 ...ve-forwarding-path-for-VLAN-tag-acti.patch |   207 -
 ...forwarding-path-for-bridge-pppoe-dev.patch |   113 -
 ...-forwarding-path-for-dsa-slave-ports.patch |    63 -
 ...filter-flowtable-add-xmit-path-types.patch |   147 -
 ...ble-use-dev_fill_forward_path-to-obt.patch |   191 -
 ...ble-use-dev_fill_forward_path-to-obt.patch |   374 -
 ...netfilter-flowtable-add-vlan-support.patch |   410 -
 ...ble-add-bridge-vlan-filtering-suppor.patch |    30 -
 ...etfilter-flowtable-add-pppoe-support.patch |   145 -
 ...-netfilter-flowtable-add-dsa-support.patch |    32 -
 ...ter-flowtable-bridge-and-vlan-suppor.patch |   107 -
 ...ble-add-offload-support-for-xmit-pat.patch |   310 -
 ...ow_offload-use-direct-xmit-if-hardwa.patch |   114 -
 ...ble-bridge-vlan-hardware-offload-and.patch |   123 -
 ...w_offload-add-FLOW_ACTION_PPPOE_PUSH.patch |    30 -
 ...ble-support-for-FLOW_ACTION_PPPOE_PU.patch |    35 -
 ...sa-slave-add-support-for-TC_SETUP_FT.patch |    53 -
 ...k_eth_soc-fix-parsing-packets-in-GDM.patch |    68 -
 ..._eth_soc-add-support-for-initializin.patch |  1312 --
 ..._eth_soc-add-flow-offloading-support.patch |   568 -
 ...e-update-documentation-with-enhancem.patch |   236 -
 ...rnet-mediatek-ppe-fix-busy-wait-loop.patch |    72 -
 ...iatek-fix-a-typo-bug-in-flow-offload.patch |    29 -
 ..._eth_soc-unmap-RX-data-before-callin.patch |    38 -
 ...et-mtk_eth_soc-fix-build_skb-cleanup.patch |    38 -
 ...net-mtk_eth_soc-use-napi_consume_skb.patch |    77 -
 ..._eth_soc-reduce-MDIO-bus-access-late.patch |    30 -
 ..._eth_soc-remove-unnecessary-TX-queue.patch |    54 -
 ..._eth_soc-use-larger-burst-size-for-Q.patch |    37 -
 ...-mtk_eth_soc-increase-DMA-ring-sizes.patch |    26 -
 ..._eth_soc-implement-dynamic-interrupt.patch |   313 -
 ..._eth_soc-cache-HW-pointer-of-last-fr.patch |    73 -
 ..._eth_soc-only-read-the-full-RX-descr.patch |    49 -
 ..._eth_soc-reduce-unnecessary-interrup.patch |    39 -
 ...et-mtk_eth_soc-rework-NAPI-callbacks.patch |   110 -
 ..._eth_soc-set-PPE-flow-hash-as-skb-ha.patch |    47 -
 ..._eth_soc-use-iopoll.h-macro-for-DMA-.patch |    71 -
 ...t-ethernet-mtk_eth_soc-missing-mutex.patch |    63 -
 ...t-mtk_eth_soc-handle-VLAN-pop-action.patch |    22 -
 ...ble-dst_check-from-garbage-collector.patch |   159 -
 ...ack-Introduce-tcp-offload-timeout-co.patch |    94 -
 ...ack-Introduce-udp-offload-timeout-co.patch |    92 -
 ...ble-Set-offload-timeouts-according-t.patch |   134 -
 ...ble-Add-FLOW_OFFLOAD_XMIT_UNSPEC-xmi.patch |    41 -
 ...owtable-avoid-possible-false-sharing.patch |    27 -
 ...wtable-move-dst_check-to-packet-path.patch |    99 -
 ...thernet-mediatek-support-setting-MTU.patch |   138 -
 ...ack-sanitize-table-size-default-sett.patch |   100 -
 ...table-remove-nf_ct_l4proto_find-call.patch |    47 -
 ...ack-remove-offload_pickup-sysctl-aga.patch |   184 -
 ...lter-flowtable-fix-TCP-flow-teardown.patch |   166 -
 ...-segment-s-lowest-address-as-unicast.patch |    32 -
 .../630-v5.15-page_pool_frag_support.patch    |   798 -
 ...net-page_pool-use-in_softirq-instead.patch |    56 -
 ...632-v6.3-net-add-helper-eth_addr_add.patch |    41 -
 ...e-between-coalescing-and-releasing-S.patch |    85 -
 ...x-select-correct-page-on-config-init.patch |   108 -
 ...ix-probe-error-if-copper-page-is-sel.patch |    73 -
 ...10-v5.12-net-phy-Add-100-base-x-mode.patch |    56 -
 ...-sfp-add-support-for-100-base-x-SFPs.patch |    40 -
 ...phy-marvell-refactor-HWMON-OOP-style.patch |   549 -
 ...-marvell-add-SFP-support-for-88E1510.patch |   161 -
 ...cally-bring-up-DSA-master-when-openi.patch |    85 -
 ...y-switchdev-of-disappearance-of-old-.patch |   126 -
 ...r-when-a-non-legacy-FDB-operation-fa.patch |    52 -
 ...e-switchdev_notifier_fdb_info-in-dsa.patch |   226 -
 ...tchdev-event-implementation-under-th.patch |    85 -
 ...ly-in-dsa_slave_switchdev_event-if-w.patch |    42 -
 ...or-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch |   264 -
 ...hy-at803x-mask-1000-Base-X-link-mode.patch |    68 -
 ...setup-core-clock-even-in-TRGMII-mode.patch |    84 -
 ...-mt7530-MT7530-optional-GPIO-support.patch |   181 -
 ...-mt7530-Add-support-for-EEE-features.patch |   120 -
 ...-formatting-issues-and-provide-missi.patch |    95 -
 ...5-of-Fix-kerneldoc-output-formatting.patch |   489 -
 ...Return-section-in-kerneldoc-comments.patch |   787 -
 ...lling-issue-with-function-param-prop.patch |    54 -
 ...the-dst-buffer-to-of_get_mac_address.patch |  1935 ---
 ...t_mac_addr_nvmem-for-non-platform-de.patch |    77 -
 ...andle-deferred-probe-error-due-to-ma.patch |    42 -
 ...platform-handle-mac-address-deferral.patch |    36 -
 ...-0001-net-bgmac-improve-handling-PHY.patch |    84 -
 ...t-bgmac-support-MDIO-described-in-DT.patch |    54 -
 ...k-change-simple-print-to-dev-variant.patch |    35 -
 ...use-iopoll-macro-for-qca8k_busy_wait.patch |    61 -
 ...prove-qca8k-read-write-rmw-bus-acces.patch |    86 -
 ...a-qca8k-handle-qca8k_set_page-errors.patch |   101 -
 ...ndle-error-with-qca8k_read-operation.patch |   207 -
 ...ndle-error-with-qca8k_write-operatio.patch |   263 -
 ...andle-error-with-qca8k_rmw-operation.patch |   226 -
 ...8k-handle-error-from-qca8k_busy_wait.patch |    66 -
 ...qca8k-add-support-for-qca8327-switch.patch |    96 -
 ...sa-qca8k-Document-new-compatible-qca.patch |    26 -
 ...add-priority-tweak-to-qca8337-switch.patch |   130 -
 ...a-qca8k-limit-port5-delay-to-qca8337.patch |    31 -
 ...d-GLOBAL_FC-settings-needed-for-qca8.patch |    48 -
 ...dsa-qca8k-add-support-for-switch-rev.patch |   114 -
 ...d-ethernet-ports-fallback-to-setup_m.patch |    28 -
 ...-qca8k-make-rgmii-delay-configurable.patch |   188 -
 ...clear-MASTER_EN-after-phy-read-write.patch |    50 -
 ...a-qca8k-protect-MASTER-busy_wait-wit.patch |   128 -
 ...qca8k-enlarge-mdio-delay-and-timeout.patch |    39 -
 ...d-support-for-internal-phy-and-inter.patch |   267 -
 ...ngs-dsa-qca8k-Document-internal-mdio.patch |    93 -
 ...prove-internal-mdio-read-write-bus-a.patch |    95 -
 ...ss-switch_revision-info-to-phy-dev_f.patch |    48 -
 ...ort-for-qca8k-switch-internal-PHY-in.patch |   229 -
 ...issing-unlock-on-error-in-qca8k-vlan.patch |    64 -
 ...eck-return-value-of-read-functions-c.patch |   348 -
 ...d-missing-check-return-value-in-qca8.patch |    47 -
 ...x-an-endian-bug-in-qca8k-get-ethtool.patch |    47 -
 ...eck-the-correct-variable-in-qca8k-se.patch |    31 -
 ...ernel-panic-with-legacy-mdio-mapping.patch |    80 -
 ...-Add-debug-prints-in-b53_vlan_enable.patch |    65 -
 ...sa-b53-spi-allow-device-tree-probing.patch |    41 -
 ...3-net-dsa-b53-relax-is63xx-condition.patch |    31 -
 ...tag_brcm-add-support-for-legacy-tags.patch |   180 -
 ...0005-net-dsa-b53-support-legacy-tags.patch |    53 -
 ...dsa-b53-mmap-Add-device-tree-support.patch |    92 -
 ...-spi-add-missing-MODULE_DEVICE_TABLE.patch |    27 -
 ...Do-not-force-CPU-to-be-always-tagged.patch |    86 -
 ...3-remove-redundant-null-check-on-dev.patch |    30 -
 ...Create-default-VLAN-entry-explicitly.patch |    71 -
 ...dd-support-for-qca-8327-internal-phy.patch |    48 -
 ...3-Include-all-ports-in-enabled_ports.patch |   131 -
 ...-BCM5301x-workaround-for-a-wrong-CPU.patch |    42 -
 ...prove-flow-control-setup-on-BCM5301x.patch |    32 -
 ...t-dsa-b53-Drop-unused-cpu_port-field.patch |   205 -
 ...t-skb-offload_fwd_mark-when-not-offl.patch |   138 -
 ...x-add-support-for-qca-8327-A-variant.patch |    65 -
 ...dd-resume-suspend-function-to-qca83x.patch |    45 -
 ...ix-spacing-and-improve-name-for-83xx.patch |    95 -
 ...hy-at803x-fix-resume-for-QCA8327-phy.patch |   131 -
 ...x-add-DAC-amplitude-fix-for-8327-phy.patch |    91 -
 ...nable-prefer-master-for-83xx-interna.patch |    27 -
 ...hy-at803x-better-describe-debug-regs.patch |   127 -
 ...-dsa-qca8k-add-mac-power-sel-support.patch |    80 -
 ...dsa-qca8k-Add-SGMII-clock-phase-prop.patch |    30 -
 ...k-add-support-for-sgmii-falling-edge.patch |   127 -
 ...dsa-qca8k-Document-support-for-CPU-p.patch |    29 -
 ...dsa-qca8k-add-support-for-cpu-port-6.patch |   153 -
 ...work-rgmii-delay-logic-and-scan-for-.patch |   295 -
 ...dsa-qca8k-Document-qca-sgmii-enable-.patch |    33 -
 ...-qca8k-add-explicit-SGMII-PLL-enable.patch |    65 -
 ...dsa-qca8k-Document-qca-led-open-drai.patch |    37 -
 ...qca8k-add-support-for-pws-config-reg.patch |    92 -
 ...dsa-qca8k-document-support-for-qca83.patch |    32 -
 ...et-dsa-qca8k-add-support-for-QCA8328.patch |    78 -
 ...8k-set-internal-delay-also-for-sgmii.patch |   159 -
 ...move-port-config-to-dedicated-struct.patch |   124 -
 ...ipq8064-mdio-fix-warning-with-new-qc.patch |    26 -
 ...net-dsa-qca8k-convert-to-YAML-schema.patch |   631 -
 ...elay-applied-to-wrong-cpu-in-parse-p.patch |    28 -
 ...for-loop-in-setup-and-add-cpu-port-c.patch |   151 -
 ...sure-pad0-mac06-exchange-is-disabled.patch |    47 -
 ...ernal-delay-applied-to-the-wrong-PAD.patch |    48 -
 ...16-net-dsa-qca8k-fix-MTU-calculation.patch |    46 -
 ...redundant-check-in-parse_port_config.patch |    29 -
 ...vert-to-GENMASK_FIELD_PREP_FIELD_GET.patch |   508 -
 ...move-extra-mutex_init-in-qca8k_setup.patch |    25 -
 ...move-regmap-init-in-probe-and-set-it.patch |    46 -
 ...k-initial-conversion-to-regmap-heper.patch |   249 -
 ...ca8k-add-additional-MIB-counter-and-.patch |   120 -
 ...ca8k-add-support-for-port-fast-aging.patch |    53 -
 ...sa-qca8k-add-set_ageing_time-support.patch |    78 -
 ...sa-qca8k-add-support-for-mdb_add-del.patch |   142 -
 ...1-net-dsa-mt7530-support-setting-MTU.patch |   112 -
 ...-dsa-mt7530-enable-MTU-normalization.patch |    36 -
 ...a-mt7530-support-setting-ageing-time.patch |    99 -
 ...et-dsa-mt7530-support-MDB-operations.patch |   171 -
 ...MediaTek-Gigabit-Ethernet-PHY-driver.patch |   159 -
 ...net-dsa-mt7530-add-interrupt-support.patch |   425 -
 ...N-filtering-syncing-out-of-dsa_switc.patch |    83 -
 ...cross-chip-syncing-of-VLAN-filtering.patch |    58 -
 ...x-keep-the-pvid-at-0-when-VLAN-unawa.patch |   225 -
 ...ve-page-selection-fix-to-config_init.patch |    81 -
 ...-02-net-phy-at803x-add-fiber-support.patch |   193 -
 ...y-at803x-support-downstream-SFP-cage.patch |    95 -
 ...LL-pointer-dereference-on-AR9331-PHY.patch |    56 -
 ...ix-error-return-code-in-at803x_probe.patch |    31 -
 ...ovide-missing-documentation-for-some.patch |    72 -
 ...x-a-couple-of-spelling-errors-in-fw_.patch |    34 -
 ...153_ecm-support-ECM-mode-for-RTL8153.patch |   320 -
 ...12-net-usb-r8152-use-new-tasklet-API.patch |    41 -
 ...veral-functions-about-phy-patch-requ.patch |   198 -
 ...t-the-flow-of-power-cut-for-RTL8153B.patch |   134 -
 ...152-enable-U1-U2-for-USB_SPEED_SUPER.patch |    47 -
 ...f-the-pointer-of-the-function-exists.patch |    51 -
 ...r8152-replace-netif_err-with-dev_err.patch |    36 -
 ...rtl_set_eee_plus-and-r8153b_green_en.patch |    89 -
 ...ter-fram-gap-time-depending-on-speed.patch |    75 -
 ...just-rtl8152_check_firmware-function.patch |   152 -
 ...8152-add-help-function-to-change-mtu.patch |   157 -
 .../793-v5.13-r8152-support-new-chips.patch   |  2886 ----
 ...port-PHY-firmware-for-RTL8156-series.patch |   691 -
 ...rch-the-configuration-of-vendor-mode.patch |    79 -
 ...add-dt-property-to-disable-CLKOUT-cl.patch |   119 -
 ...net-usb-ax88179_178a-add-TSO-feature.patch |    68 -
 ..._nvram-rename-finding-function-and-i.patch |    80 -
 ..._nvram-add-helper-checking-for-NVRAM.patch |    90 -
 ...7xx_nvram-extract-code-copying-NVRAM.patch |    80 -
 ..._nvram-look-for-NVRAM-with-for-inste.patch |    37 -
 ..._nvram-inline-code-checking-NVRAM-si.patch |    70 -
 ...core-Add-support-for-keepout-regions.patch |   267 -
 ...mem-qfprom-Don-t-touch-certain-fuses.patch |    87 -
 ...add-support-for-the-unaliged-word-co.patch |   105 -
 ...imx-iim-Use-of_device_get_match_data.patch |    41 -
 ...r-to-expose-reserved-memory-as-nvmem.patch |   160 -
 ...m-Kconfig-Correct-typo-in-NVMEM_RMEM.patch |    28 -
 ...001-nvmem-convert-comma-to-semicolon.patch |    39 -
 ...-new-driver-exposing-Broadcom-s-NVRA.patch |   126 -
 ...unctions-to-make-number-reading-easy.patch |   174 -
 ...x-unintentional-sign-extension-issue.patch |    34 -
 ...-fix-undefined-reference-to-memremap.patch |    29 -
 ...d-support-for-fuse-blowing-on-sc7280.patch |   102 -
 ...-nvmem-core-allow-specifying-of_node.patch |    80 -
 ...0002-nvmem-sprd-Fix-an-error-message.patch |    30 -
 ...0003-nvmem-sunxi_sid-Set-type-to-OTP.patch |    27 -
 ...14-0004-nvmem-qfprom-minor-nit-fixes.patch |    46 -
 ...ify-nvmem_cell_read_variable_common-.patch |    52 -
 ...rove-the-comment-about-regulator-set.patch |    33 -
 ...v5.14-0007-nvmem-add-NVMEM_TYPE_FRAM.patch |    36 -
 ...280-Handle-the-additional-power-doma.patch |    89 -
 ...rror-handling-while-validating-keepo.patch |    36 -
 ...tp-Add-new-driver-for-the-Wii-and-Wi.patch |   191 -
 ...EM_NINTENDO_OTP-should-depend-on-WII.patch |    29 -
 ...-rework-nvmem-cell-instance-creation.patch |   456 -
 ...-nvmem-cell-post-processing-callback.patch |    82 -
 ...cotp-add-support-for-post-processing.patch |    92 -
 ...support-minimum-one-byte-access-stri.patch |    47 -
 ...-Remove-unused-devm_nvmem_unregister.patch |    72 -
 ...em-core-Use-devm_add_action_or_reset.patch |    58 -
 ...-input-parameter-for-NULL-in-nvmem_u.patch |    30 -
 ...4-nvmem-qfprom-fix-kerneldoc-warning.patch |    29 -
 ...sunxi_sid-Add-support-for-D1-variant.patch |    38 -
 ...fuse-replace-unnecessary-devm_kstrdu.patch |    28 -
 ...-for-Layerscape-SFP-Security-Fuse-Pr.patch |   139 -
 ...rease-fuse-blow-timeout-to-prevent-w.patch |    32 -
 ...d-driver-for-OCOTP-in-Sunplus-SP7021.patch |   277 -
 ...-parse-NVRAM-content-into-NVMEM-cell.patch |   146 -
 ...mark-ACPI-device-ID-table-as-maybe-u.patch |    32 -
 ...em-sunplus-ocotp-staticize-sp_otp_v0.patch |    30 -
 ...cotp-drop-useless-probe-confirmation.patch |    27 -
 ...support-passing-DT-node-in-cell-info.patch |    41 -
 ...-find-Device-Tree-nodes-for-NVMEM-ce.patch |    38 -
 ...19-0006-nvmem-Add-Apple-eFuse-driver.patch |   130 -
 ...ng-pm_runtime_resume_and_get-instead.patch |    31 -
 .../809-v5.19-0008-nvmem-sfp-Use-regmap.patch |   109 -
 ...m-sfp-Add-support-for-TA-2.1-devices.patch |    38 -
 ...001-nvmem-microchip-otpc-add-support.patch |   389 -
 ...Simplify-with-devm_platform_get_and_.patch |    32 -
 ...m-core-Fix-memleak-in-nvmem_register.patch |    53 -
 ...-handling-U-Boot-environment-variabl.patch |   286 -
 ...-Use-kzalloc-for-allocating-only-one.patch |    29 -
 ...nvmem-prefix-all-symbols-with-NVMEM_.patch |   270 -
 ...m-sort-config-symbols-alphabetically.patch |   535 -
 ...-find-Device-Tree-nodes-for-NVMEM-ce.patch |    31 -
 ...1-0008-nvmem-lan9662-otp-add-support.patch |   274 -
 ...em-u-boot-env-fix-crc32-casting-type.patch |    32 -
 ...em-lan9662-otp-Fix-compatible-string.patch |    34 -
 ...-fix-crc32_data_offset-on-redundant-.patch |    59 -
 ...-Fix-return-value-check-in-rmem_read.patch |    36 -
 ...p-Change-return-type-of-lan9662_otp_.patch |    35 -
 ...e-STM32MP15_BSEC_NUM_LOWER-in-config.patch |    82 -
 ...-warning-when-upper-OTPs-are-updated.patch |    34 -
 ...nvmem-stm32-add-nvmem-type-attribute.patch |    26 -
 ...m-stm32-fix-spelling-typo-in-comment.patch |    27 -
 ...x-spelling-mistake-controlls-control.patch |    27 -
 ...boot-env-add-Broadcom-format-support.patch |    67 -
 ...mem-brcm_nvram-Add-check-for-kzalloc.patch |    30 -
 ...nxi_sid-Always-use-32-bit-MMIO-reads.patch |    55 -
 ...mem-core-fix-device-node-refcounting.patch |    48 -
 ...mem-core-remove-spurious-white-space.patch |    26 -
 ...e-add-an-index-parameter-to-the-cell.patch |   180 -
 ...struct-nvmem_cell_info-to-nvmem-prov.patch |    78 -
 ...the-removal-of-the-cells-in-nvmem_ad.patch |    65 -
 ...05-nvmem-core-add-nvmem_add_one_cell.patch |   122 -
 ...vmem_add_one_cell-in-nvmem_add_cells.patch |    93 -
 ...32-add-OP-TEE-support-for-STM32MP13x.patch |   562 -
 ...ect-bsec-pta-presence-for-STM32MP15x.patch |    85 -
 ...eprm-fix-kernel-doc-bad-line-warning.patch |    32 -
 ...mi-sdam-register-at-device-init-time.patch |    43 -
 ...011-nvmem-stm32-fix-OPTEE-dependency.patch |    46 -
 ...001-nvmem-xilinx-zynqmp-make-modular.patch |    35 -
 ...2-nvmem-core-introduce-NVMEM-layouts.patch |   387 -
 ...ndle-the-absence-of-expected-layouts.patch |    61 -
 ...-core-request-layout-modules-loading.patch |    52 -
 ...em-core-add-per-cell-post-processing.patch |    86 -
 ...ow-to-modify-a-cell-before-adding-it.patch |    59 -
 ...replace-global-post-processing-with-.patch |    81 -
 ...m-cell-drop-global-cell_post_process.patch |    68 -
 ...de-own-priv-pointer-in-post-process-.patch |    76 -
 ...ayouts-sl28vpd-Add-new-layout-driver.patch |   215 -
 ...youts-onie-tlv-Add-new-layout-driver.patch |   306 -
 ...m-mark-OF-related-data-as-maybe-unus.patch |    32 -
 ...Support-postprocessing-for-GPU-speed.patch |   120 -
 ...p-Use-devm_platform_ioremap_resource.patch |    39 -
 ...tp-Use-devm_platform_ioremap_resourc.patch |    39 -
 ...p-Use-devm_platform_get_and_ioremap_.patch |    32 -
 ...rt-specifying-both-cell-raw-data-pos.patch |   115 -
 ...nv-post-process-ethaddr-env-variable.patch |    81 -
 ...cro-to-register-nvmem-layout-drivers.patch |    42 -
 ...28vpd-Use-module_nvmem_layout_driver.patch |    39 -
 ...ie-tlv-Use-module_nvmem_layout_drive.patch |    39 -
 ...uts-onie-tlv-Drop-wrong-module-alias.patch |    24 -
 ...28vpd-set-varaiable-sl28vpd_layout-s.patch |    31 -
 ...rious-flag-to-disable-overcurrent-ch.patch |    88 -
 ...-platform-add-spurious_oc-DT-support.patch |    31 -
 ...-declare-its-reliance-on-msi-domains.patch |    34 -
 ...declar-their-reliance-on-msi-domains.patch |    44 -
 ...ertise-lack-of-built-in-msi-handling.patch |    59 -
 ...t_phandle_with_args-arguments-with-C.patch |    27 -
 ...ll-of_parse_phandle-variants-static-.patch |   359 -
 ...-of_parse_phandle_with_optional_args.patch |    58 -
 ...ke-.-cells-optional-for-simple-props.patch |    34 -
 ...operty-add-nvmem-cell-cells-property.patch |    30 -
 ...vice-Ignore-modalias-of-reused-nodes.patch |    37 -
 ...-ignore-error-code-in-of_device_ueve.patch |    29 -
 ...01-of-Fix-modalias-string-generation.patch |    70 -
 ...002-of-Update-of_device_get_modalias.patch |   103 -
 ...v6.4-0003-of-Rename-of_modalias_node.patch |   173 -
 ...0004-of-Move-of_modalias-to-module.c.patch |   160 -
 ...uest-module-helper-logic-to-module.c.patch |   131 -
 ...ialize-enable-GPIO-direction-to-outp.patch |    28 -
 ...eds-pca955x-clean-up-code-formatting.patch |   176 -
 ...-pca955x-add-brightness-get-function.patch |    81 -
 ...implement-the-default-state-property.patch |   117 -
 ...955x-let-the-core-process-the-fwnode.patch |   136 -
 ...leds-pca955x-switch-to-i2c-probe-new.patch |    63 -
 ...s-add-Broadcom-s-BCM63138-controller.patch |   125 -
 ...-add-support-for-BCM63138-controller.patch |   371 -
 ...-leds-bcm63138-unify-full-stops-in-d.patch |    30 -
 ...help-info-about-BCM63138-module-name.patch |    25 -
 ...eds-leds-bcm63138-get-rid-of-LED_OFF.patch |    30 -
 ...mul-Add-description-for-class_revisi.patch |    44 -
 ...mul-Add-definitions-for-missing-capa.patch |    73 -
 ...-support-for-DEVCAP2-DEVCTL2-LNKCAP2.patch |    61 -
 ...ment-actions-in-driver-remove-method.patch |    34 -
 ...able-bus-mastering-when-unbinding-dr.patch |    41 -
 ...k-all-interrupts-when-unbinding-driv.patch |    48 -
 ...ark-Fix-memory-leak-in-driver-unbind.patch |    33 -
 ...k-Assert-PERST-when-unbinding-driver.patch |    33 -
 ...able-link-training-when-unbinding-dr.patch |    34 -
 ...able-common-PHY-when-unbinding-drive.patch |    30 -
 ...mvebu-a3700-comphy-Rename-HS-SGMMI-t.patch |    67 -
 ...mvebu-a3700-comphy-Remove-unsupporte.patch |    40 -
 ...PS-ath79-drop-_machine_restart-again.patch |    49 -
 ...ext-hwmon-lm70-Add-ti-tmp125-support.patch |    71 -
 ...dd-Texas-Instruments-TPS23861-driver.patch |   711 -
 ...-tps23861-define-regmap-max-register.patch |    29 -
 ...mon-tps23861-set-current-shunt-value.patch |    57 -
 ...on-tps23861-correct-shunt-LSB-values.patch |    34 -
 ...ix-byte-order-in-current-and-voltage.patch |    66 -
 ...ether-export-usbnet_cdc_zte_rx_fixup.patch |    58 -
 ...e-the-bogus-MAC-fixup-for-ZTE-device.patch |   118 -
 ...-scope-of-bogus-MAC-address-detectio.patch |    63 -
 ...Refine-the-ic_id_table-for-clearer-a.patch |   183 -
 ...ooth-btrtl-rename-USB-fw-for-RTL8761.patch |    39 -
 ...Add-0x0b05-0x190e-Realtek-8761BU-ASU.patch |    54 -
 ...Add-support-for-TP-Link-UB500-Adapte.patch |    57 -
 ...oth-btusb-Add-another-Realtek-8761BU.patch |    55 -
 target/linux/generic/config-5.10              |  7205 ---------
 .../hack-5.10/100-update-mtk_wed_h.patch      |   248 -
 .../generic/hack-5.10/204-module_strip.patch  |   212 -
 ...-abort-configuration-on-unset-symbol.patch |    41 -
 .../210-darwin_scripts_include.patch          |  3053 ----
 .../211-darwin-uuid-typedef-clash.patch       |    22 -
 .../hack-5.10/212-tools_portability.patch     |   110 -
 .../hack-5.10/214-spidev_h_portability.patch  |    24 -
 .../hack-5.10/220-arm-gc_sections.patch       |   123 -
 .../hack-5.10/221-module_exports.patch        |   126 -
 .../hack-5.10/230-openwrt_lzma_options.patch  |    34 -
 .../hack-5.10/250-netfilter_depends.patch     |    27 -
 .../linux/generic/hack-5.10/251-kconfig.patch |   210 -
 .../generic/hack-5.10/253-ksmbd-config.patch  |    34 -
 .../hack-5.10/259-regmap_dynamic.patch        |   135 -
 .../260-crypto_test_dependencies.patch        |    52 -
 .../hack-5.10/261-lib-arc4-unhide.patch       |    28 -
 .../generic/hack-5.10/280-rfkill-stubs.patch  |    84 -
 ...cache-use-more-efficient-cache-blast.patch |    64 -
 .../321-powerpc_crtsavres_prereq.patch        |    38 -
 ...don-t-reply-on-mtdblock-device-minor.patch |    85 -
 ...rans-call-add-disks-after-mtd-device.patch |    98 -
 .../410-block-fit-partition-parser.patch      |   251 -
 ...upport-OpenWrt-s-MTD_ROOTFS_ROOT_DEV.patch |    24 -
 ...-root-on-targets-with-CONFIG_FIT_PAR.patch |    31 -
 ...ers-add-nvmem-support-to-cmdlinepart.patch |   120 -
 .../hack-5.10/430-mtk-bmt-support.patch       |    34 -
 .../hack-5.10/600-bridge_offload.patch        |   845 --
 ...of_net-add-mac-address-ascii-support.patch |   116 -
 ...lter-connmark-introduce-set-dscpmark.patch |   214 -
 ...-netfilter-add-xt_FLOWOFFLOAD-target.patch |   874 --
 .../hack-5.10/651-wireless_mesh_header.patch  |    24 -
 .../hack-5.10/660-fq_codel_defaults.patch     |    27 -
 ...t-size-the-hashtable-more-adequately.patch |    25 -
 .../700-swconfig_switch_drivers.patch         |   131 -
 ...-dsa-mv88e6xxx-disable-ATU-violation.patch |    41 -
 .../hack-5.10/720-net-phy-add-aqr-phys.patch  |   142 -
 .../721-net-add-packet-mangeling.patch        |   167 -
 ...hy-aquantia-enable-AQR112-and-AQR412.patch |   154 -
 ...aquantia-fix-system-side-protocol-mi.patch |    34 -
 ...y-aquantia-Add-AQR113-driver-support.patch |    43 -
 ...ntia-add-PHY_IDs-for-AQR112-variants.patch |    63 -
 ...-r8152-add-LED-configuration-from-OF.patch |    74 -
 ...et-add-RTL8152-binding-documentation.patch |    54 -
 .../hack-5.10/773-bgmac-add-srab-switch.patch |    98 -
 .../780-usb-net-MeigLink_modem_support.patch  |    47 -
 .../800-GPIO-add-named-gpio-exports.patch     |   162 -
 .../810-bcma-ssb-fallback-sprom.patch         |   169 -
 .../hack-5.10/901-debloat_sock_diag.patch     |   162 -
 .../generic/hack-5.10/902-debloat_proc.patch  |   408 -
 .../hack-5.10/904-debloat_dma_buf.patch       |    92 -
 .../hack-5.10/910-kobject_uevent.patch        |    32 -
 .../911-kobject_add_broadcast_uevent.patch    |    76 -
 .../hack-5.10/920-device_tree_cmdline.patch   |    28 -
 ...terrupt-provider-address-cells-check.patch |    28 -
 ...include-asm-rwonce.h-for-kernel-code.patch |    29 -
 ...s-negative-stack-offsets-on-stack-tr.patch |    57 -
 ...ilicon-Labs-EM3581-device-compatible.patch |    21 -
 ...ilicon-Labs-SI3210-device-compatible.patch |    22 -
 ..._wdt-Add-support-for-specifying-WDI-.patch |    75 -
 ...e_mem_map-with-ARCH_PFN_OFFSET-calcu.patch |    82 -
 ...ame2-and-add-RENAME_WHITEOUT-support.patch |    78 -
 ...41-jffs2-add-RENAME_EXCHANGE-support.patch |    73 -
 .../142-jffs2-add-splice-ops.patch            |    20 -
 ...ge_allow_receiption_on_disabled_port.patch |    45 -
 ...-rs5c372-support_alarms_up_to_1_week.patch |    94 -
 ...he_alarm_to_be_used_as_wakeup_source.patch |    70 -
 .../203-kallsyms_uncompressed.patch           |   119 -
 .../205-backtrace_module_info.patch           |    41 -
 ...e-filenames-from-deps_initramfs-list.patch |    30 -
 ...able_wilink_platform_without_drivers.patch |    20 -
 .../270-platform-mikrotik-build-bits.patch    |    31 -
 .../300-mips_expose_boot_raw.patch            |    40 -
 ...rriers-between-dcache-icache-flushes.patch |    71 -
 .../302-mips_no_branch_likely.patch           |    22 -
 .../pending-5.10/305-mips_module_reloc.patch  |   371 -
 .../307-mips_highmem_offset.patch             |    19 -
 .../pending-5.10/308-mips32r2_tune.patch      |    22 -
 ...CPU-option-reporting-to-proc-cpuinfo.patch |   140 -
 .../310-arm_module_unresolved_weak_sym.patch  |    22 -
 ...t-command-line-parameters-from-users.patch |   281 -
 .../332-arc-add-OWRTDTB-section.patch         |    84 -
 ...able-unaligned-access-in-kernel-mode.patch |    24 -
 ...ernel-XZ-compression-option-on-PPC_8.patch |    25 -
 .../400-mtd-mtdsplit-support.patch            |   337 -
 ...support-for-minor-aligned-partitions.patch |   245 -
 ...ers-ofpart-fix-parsing-subpartitions.patch |    76 -
 .../pending-5.10/420-mtd-redboot_space.patch  |    41 -
 ...30-mtd-add-myloader-partition-parser.patch |   229 -
 ...check-for-bad-blocks-when-calculatin.patch |    68 -
 ...bcm47xxpart-detect-T_Meter-partition.patch |    37 -
 ...mtd-add-routerbootpart-parser-config.patch |    38 -
 ...mtd-cfi_cmdset_0002-no-erase_suspend.patch |    25 -
 ...et_0002-add-buffer-write-cmd-timeout.patch |    17 -
 ...25p80-mx-disable-software-protection.patch |    18 -
 .../476-mtd-spi-nor-add-eon-en25q128.patch    |    18 -
 .../477-mtd-spi-nor-add-eon-en25qx128a.patch  |    21 -
 .../479-mtd-spi-nor-add-xtx-xt25f128b.patch   |    79 -
 ...r-add-support-for-Gigadevice-GD25D05.patch |    22 -
 .../483-mtd-spi-nor-add-gd25q512.patch        |    21 -
 ...spinand-add-support-for-xtx-xt26g0xa.patch |   178 -
 .../484-mtd-spi-nor-add-esmt-f25l16pa.patch   |    24 -
 .../485-mtd-spi-nor-add-xmc-xm25qh128c.patch  |    22 -
 .../488-mtd-spi-nor-add-xmc-xm25qh64c.patch   |    22 -
 ...mtd-device-named-ubi-or-data-on-boot.patch |    97 -
 ...to-create-ubiblock-device-for-rootfs.patch |    69 -
 ...ting-ubi0-rootfs-in-init-do_mounts.c.patch |    53 -
 ...ROOT_DEV-to-ubiblock-rootfs-if-unset.patch |    34 -
 .../494-mtd-ubi-add-EOF-marker-support.patch  |    60 -
 ...-add-bindings-for-mtd-concat-devices.patch |    52 -
 ...cat-add-dt-driver-for-concat-devices.patch |   216 -
 ...i-nor-locking-support-for-MX25L6405D.patch |    34 -
 ...i-nor-disable-16-bit-sr-for-macronix.patch |    30 -
 .../500-fs_cdrom_dependencies.patch           |    51 -
 .../530-jffs2_make_lzma_available.patch       |  4581 ------
 .../pending-5.10/532-jffs2_eofdetect.patch    |    65 -
 .../600-netfilter_conntrack_flush.patch       |    88 -
 ...etfilter_match_bypass_default_checks.patch |   110 -
 ...netfilter_match_bypass_default_table.patch |   106 -
 ...netfilter_match_reduce_memory_access.patch |    22 -
 ...del-do-not-defer-queue-length-update.patch |    86 -
 .../pending-5.10/630-packet_socket_type.patch |   138 -
 .../pending-5.10/655-increase_skb_pad.patch   |    20 -
 ...Add-support-for-MAP-E-FMRs-mesh-mode.patch |   511 -
 ...ng-with-source-address-failed-policy.patch |   263 -
 ...nes-for-_POLICY_FAILED-until-all-cod.patch |    50 -
 ...T-skip-GRO-for-foreign-MAC-addresses.patch |   149 -
 ...et-add-mac-address-increment-support.patch |    89 -
 ...83-of_net-add-mac-address-to-of-tree.patch |    54 -
 ...t-do-mac-address-increment-only-once.patch |    31 -
 ..._eth_soc-avoid-creating-duplicate-of.patch |    26 -
 ..._eth_soc-add-support-for-coherent-DM.patch |   327 -
 ...ek-mt7622-add-support-for-coherent-D.patch |    30 -
 ..._eth_soc-add-support-for-Wireless-Et.patch |  1679 ---
 ..._eth_soc-implement-flow-offloading-t.patch |   269 -
 ...ek-mt7622-introduce-nodes-for-Wirele.patch |    62 -
 ..._eth_soc-add-ipv6-flow-offload-suppo.patch |    79 -
 ..._eth_soc-support-TC_SETUP_BLOCK-for-.patch |    29 -
 ..._eth_soc-allocate-struct-mtk_ppe-sep.patch |   159 -
 ..._eth_soc-rework-hardware-flow-table-.patch |   424 -
 ..._eth_soc-remove-bridge-flow-offload-.patch |    44 -
 ..._eth_soc-support-creating-mac-addres.patch |   553 -
 ...net-mtk_eth_soc-enable-threaded-NAPI.patch |    41 -
 ...detach-callback-to-struct-phy_driver.patch |    38 -
 ...ble-fix-excessive-hw-offload-attempt.patch |    27 -
 ...ow_offload-skip-dst-neigh-lookup-for.patch |    64 -
 ..._fill_forward_path-with-pppoe-bridge.patch |    66 -
 ...ow_offload-fix-offload-with-pppoe-vl.patch |    24 -
 ...a-tag_mtk-add-padding-for-tx-packets.patch |    28 -
 ...d-knob-for-filtering-rx-tx-BPDU-pack.patch |   177 -
 ...pool-and-page-referenced-frags-in-GR.patch |    35 -
 ...760-net-dsa-mv88e6xxx-fix-vlan-setup.patch |    27 -
 ...hdev-Refactor-br_switchdev_fdb_notif.patch |    77 -
 ...hdev-Include-local-flag-in-FDB-notif.patch |    42 -
 ...hdev-Send-FDB-notifications-for-host.patch |    96 -
 ...local-addresses-in-assisted-CPU-port.patch |    36 -
 ...bridge-addresses-in-assisted-CPU-por.patch |    30 -
 ...tic-FDB-entries-on-foreign-interface.patch |    56 -
 ...equest-assisted-learning-on-CPU-port.patch |    27 -
 ...-missing-linux-if_ether.h-for-ETH_AL.patch |    61 -
 ...ice-struct-copy-its-DMA-params-to-th.patch |    64 -
 ...pio-cascade-add-generic-GPIO-cascade.patch |   222 -
 ...env-align-endianness-of-crc32-values.patch |    47 -
 .../810-pci_disable_common_quirks.patch       |    62 -
 .../811-pci_disable_usb_common_quirks.patch   |   115 -
 ...problem-with-platfom-data-in-w1-gpio.patch |    26 -
 .../pending-5.10/834-ledtrig-libata.patch     |   149 -
 ...40-hwrng-bcm2835-set-quality-to-1000.patch |    26 -
 ..._wwan-add-ZTE-MF286D-modem-19d2-1485.patch |    59 -
 ...lace-custom-PCIE_CORE_INT_-macros-wi.patch |    40 -
 ...rite-IRQ-code-to-chained-IRQ-handler.patch |   125 -
 ...ck-return-value-of-generic_handle_do.patch |    31 -
 ...e-MSI-irq_chip-structures-static-dri.patch |    93 -
 ...e-msi_domain_info-structure-a-static.patch |    64 -
 ...-dev_fwnode-instead-of-of_node_to_fw.patch |    40 -
 ...actor-unmasking-summary-MSI-interrup.patch |    44 -
 ...d-support-for-masking-MSI-interrupts.patch |   117 -
 ...PCI-aardvark-Fix-setting-MSI-address.patch |    91 -
 ...12-PCI-aardvark-Enable-MSI-X-support.patch |    38 -
 ...-support-for-ERR-interrupt-on-emulat.patch |   100 -
 ...imize-writing-PCI_EXP_RTCTL_PMEIE-an.patch |    52 -
 ...dvark-Add-support-for-PME-interrupts.patch |    47 -
 ...-support-for-PME-requester-on-emulat.patch |   173 -
 ...-separate-INTA-interrupt-for-emulate.patch |   161 -
 ...ove-irq_mask_ack-callback-for-INTx-i.patch |    29 -
 ...aardvark-Don-t-mask-irq-when-mapping.patch |    27 -
 ...p-__maybe_unused-from-advk_pcie_disa.patch |    28 -
 ...ate-comment-about-link-going-down-af.patch |    35 -
 ...e-main-irq_chip-structure-a-static-d.patch |   102 -
 ...mvebu-a3700-comphy-Remove-port-from-.patch |   217 -
 ...mvebu-a3700-comphy-Add-native-kernel.patch |  1564 --
 ...l-armada-37xx-Add-xtal-clock-to-comp.patch |    31 -
 ...mvebu-Make-SATA-PHY-optional-for-Arm.patch |    61 -
 ...xhci-mvebu-make-USB-3.0-PHY-optional.patch |   163 -
 ...ark-Fix-initialization-with-old-Marv.patch |    36 -
 .../pending-5.10/920-mangle_bootargs.patch    |    71 -
 target/linux/ipq806x/config-5.10              |   492 -
 .../arm/boot/dts/qcom-ipq8062-wg2600hp3.dts   |   479 -
 .../arch/arm/boot/dts/qcom-ipq8062.dtsi       |    98 -
 .../boot/dts/qcom-ipq8064-ad7200-c2600.dtsi   |   375 -
 .../arch/arm/boot/dts/qcom-ipq8064-ad7200.dts |   135 -
 .../arch/arm/boot/dts/qcom-ipq8064-ap148.dts  |   121 -
 .../arch/arm/boot/dts/qcom-ipq8064-ap161.dts  |   159 -
 .../arch/arm/boot/dts/qcom-ipq8064-c2600.dts  |   119 -
 .../arch/arm/boot/dts/qcom-ipq8064-d7800.dts  |   384 -
 .../arch/arm/boot/dts/qcom-ipq8064-db149.dts  |   163 -
 .../arm/boot/dts/qcom-ipq8064-ea7500-v1.dts   |    91 -
 .../arch/arm/boot/dts/qcom-ipq8064-ea8500.dts |   128 -
 .../arm/boot/dts/qcom-ipq8064-eax500.dtsi     |   219 -
 .../arch/arm/boot/dts/qcom-ipq8064-g10.dts    |   279 -
 .../arch/arm/boot/dts/qcom-ipq8064-r7500.dts  |   314 -
 .../arm/boot/dts/qcom-ipq8064-r7500v2.dts     |   374 -
 .../arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts |   317 -
 .../arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi  |    69 -
 .../arm/boot/dts/qcom-ipq8064-vr2600v.dts     |   408 -
 .../arm/boot/dts/qcom-ipq8064-wg2600hp.dts    |   447 -
 .../arch/arm/boot/dts/qcom-ipq8064-wpq864.dts |   465 -
 .../arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts |   526 -
 .../arm/boot/dts/qcom-ipq8065-nbg6817.dts     |   316 -
 .../arm/boot/dts/qcom-ipq8065-nighthawk.dtsi  |   453 -
 .../arch/arm/boot/dts/qcom-ipq8065-r7800.dts  |    48 -
 .../boot/dts/qcom-ipq8065-rt4230w-rev6.dts    |   403 -
 .../arm/boot/dts/qcom-ipq8065-tr4400-v2.dts   |   425 -
 .../arch/arm/boot/dts/qcom-ipq8065-xr500.dts  |    50 -
 .../arch/arm/boot/dts/qcom-ipq8065.dtsi       |   167 -
 .../boot/dts/qcom-ipq8068-cryptid-common.dtsi |   239 -
 .../arm/boot/dts/qcom-ipq8068-ecw5410.dts     |   332 -
 .../arch/arm/boot/dts/qcom-ipq8068-mr42.dts   |   204 -
 .../arch/arm/boot/dts/qcom-ipq8068-mr52.dts   |   230 -
 ...ings-qcom_adm-Fix-channel-specifiers.patch |    71 -
 ...ically-select-PCI_DOMAINS-if-PCI-is-.patch |    29 -
 ...arch-arm-force-ZRELADDR-on-arch-qcom.patch |    62 -
 .../0065-arm-override-compiler-flags.patch    |    21 -
 ...Mangle-bootloader-s-kernel-arguments.patch |   210 -
 .../0072-add-ipq806x-with-no-clocks.patch     |    10 -
 .../082-ipq8064-dtsi-tweaks.patch             |   212 -
 .../083-ipq8064-dtsi-additions.patch          |   846 --
 .../084-ipq8064-v1.0-dtsi-cleanup.patch       |    89 -
 .../085-ipq8064-v1.0-dtsi-additions.patch     |    14 -
 .../086-ipq8064-fix-duplicate-node.patch      |   145 -
 ...qcom-cpufreq-nvmem-support-specific-.patch |    51 -
 ...7-1-ipq806x-gcc-add-missing-clk-flag.patch |    99 -
 .../097-2-ipq806x-lcc-add-missing-reset.patch |    59 -
 ...com-krait-add-missing-enable-disable.patch |    57 -
 ...missing-clk-and-reset-for-crypto-eng.patch |   372 -
 ...q-add-Krait-dedicated-scaling-driver.patch |   687 -
 ...ufreq-add-qcom-krait-cpufreq-binding.patch |   237 -
 ...add-fab-scaling-support-with-cpufreq.patch |   243 -
 ...m_nandc-add-boot_layout_mode-support.patch |   239 -
 ...vicetree-mtd-qcom_nandc-document-qco.patch |    42 -
 ...-v5.11-dmaengine-qcom-add_ADM_driver.patch |   965 --
 ....12-mtd-parsers-Add-Qcom-SMEM-parser.patch |   217 -
 ...-dwmac-ipq806x-qsgmii-pcs-all-ch-ctl.patch |    83 -
 ...conflicts-with-OpenWrt-auto-mounting.patch |    24 -
 ...M-dts-qcom-reduce-pci-IO-size-to-64K.patch |    46 -
 ...hermal-tsens-Add-VER_0-tsens-version.patch |   285 -
 ...al-tsens-Don-t-hardcode-sensor-slope.patch |    28 -
 ...l-tsens-Convert-msm8960-to-reg_field.patch |   119 -
 ...al-tsens-Use-init_common-for-msm8960.patch |    81 -
 ...tsens-Fix-bug-in-sensor-enable-for-m.patch |    66 -
 ...tsens-Replace-custom-8960-apis-with-.patch |   109 -
 ...tsens-Drop-unused-define-for-msm8960.patch |    65 -
 ...-tsens-Add-support-for-ipq8064-tsens.patch |    26 -
 ...rmal-tsens-Document-ipq8064-bindings.patch |   112 -
 ...al-tsens-Fix-wrong-slope-on-msm-8960.patch |    32 -
 ...ns-init-debugfs-only-with-successful.patch |    41 -
 ...tsens-simplify-debugfs-init-function.patch |    54 -
 ...c-explicitly-deassert-gmac-ahb-reset.patch |    75 -
 ...s-qcom-add-ahb-reset-to-ipq806x-gmac.patch |    64 -
 .../850-soc-add-qualcomm-syscon.patch         |   121 -
 .../900-arm-add-cmdline-override.patch        |    37 -
 target/linux/kirkwood/config-5.10             |   293 -
 .../kirkwood/patches-5.10/100-ib62x0.patch    |    53 -
 .../kirkwood/patches-5.10/101-iconnect.patch  |    80 -
 .../kirkwood/patches-5.10/102-dockstar.patch  |    62 -
 .../patches-5.10/103-iomega-ix2-200.patch     |    67 -
 .../patches-5.10/105-linksys-viper-dts.patch  |    59 -
 .../kirkwood/patches-5.10/106-goflexnet.patch |    53 -
 ...-zyxel-nsa3x0-common-nand-partitions.patch |    48 -
 .../kirkwood/patches-5.10/107-03-nsa325.patch |    54 -
 .../patches-5.10/109-pogoplug_v4.patch        |    87 -
 .../kirkwood/patches-5.10/110-pogo_e02.patch  |    68 -
 .../kirkwood/patches-5.10/111-l-50.patch      |    47 -
 .../patches-5.10/112-sheevaplug.patch         |    47 -
 .../patches-5.10/113-readynas_duo_v2.patch    |    76 -
 ...able-sata-port-specific-led-triggers.patch |    10 -
 .../202-linksys-find-active-root.patch        |    62 -
 .../patches-5.10/203-blackarmor-nas220.patch  |    99 -
 ...station-poweroff-prepare-for-new-dev.patch |   101 -
 ...-linkstation-poweroff-add-new-device.patch |    97 -
 target/linux/lantiq/ase/config-5.10           |    25 -
 target/linux/lantiq/config-5.10               |   225 -
 target/linux/lantiq/falcon/config-5.10        |     9 -
 .../0001-MIPS-lantiq-add-pcie-driver.patch    |  5507 -------
 .../0004-MIPS-lantiq-add-atm-hack.patch       |   482 -
 ...-MIPS-lantiq-backport-old-timer-code.patch |  1035 --
 .../0018-MTD-nand-lots-of-xrx200-fixes.patch  |   121 -
 ...antiq-handle-NO_XIP-on-cfi0001-flash.patch |    25 -
 ...T-PHY-add-led-support-for-intel-xway.patch |   294 -
 .../0028-NET-lantiq-various-etop-fixes.patch  |   864 --
 ...PS-lantiq-add-FALC-ON-i2c-bus-master.patch |  1034 --
 ...iq-wifi-and-ethernet-eeprom-handling.patch |   218 -
 ...42-arch-mips-increase-io_space_limit.patch |    24 -
 ...e-lantiq-settings-match-vendor-drive.patch |    78 -
 ...PS-lantiq-improve-USB-initialization.patch |    49 -
 .../patches-5.10/0101-find_active_root.patch  |    93 -
 .../0151-lantiq-ifxmips_pcie-use-of.patch     |   387 -
 .../lantiq/patches-5.10/0152-lantiq-VPE.patch |   172 -
 .../0154-lantiq-pci-bar11mask-fix.patch       |    22 -
 .../patches-5.10/0155-lantiq-VPE-nosmp.patch  |    14 -
 .../0160-owrt-lantiq-multiple-flash.patch     |   220 -
 ...-cmdset-0001-disable-buffered-writes.patch |    11 -
 ...add-gphy-clk-src-device-tree-binding.patch |    30 -
 ...make-the-burst-length-configurable-b.patch |    86 -
 ...le-all-hardware-interrupts-on-second.patch |    87 -
 ...y-don-t-yield-while-holding-spinlock.patch |    38 -
 .../0701-NET-lantiq-etop-of-mido.patch        |    37 -
 ...-lantiq-add-support-for-jumbo-frames.patch |   145 -
 ...q_xrx200-increase-buffer-reservation.patch |   122 -
 ...iq_xrx200-add-ingress-SG-DMA-support.patch |   104 -
 ...llow-to-use-all-GPHYs-on-xRX300-and-.patch |   275 -
 ...-lantiq-enable-jumbo-frames-on-GSWIP.patch |   127 -
 ...gure-the-burst-length-in-ethernet-dr.patch |   126 -
 ...x200-Hardcode-the-burst-length-value.patch |    73 -
 ...et-lantiq_etop-Fix-compilation-error.patch |    26 -
 ...-lantiq-dma-increase-descritor-count.patch |    28 -
 ...tiq_xrx200-increase-napi-poll-weigth.patch |    32 -
 ...t-lantiq_xrx200-convert-to-build_skb.patch |   206 -
 ...lantiq_xrx200-fix-use-after-free-bug.patch |    30 -
 ...0-confirm-skb-is-allocated-before-us.patch |    33 -
 ...rx200-fix-lock-under-memory-pressure.patch |    33 -
 ...0-restore-buffer-if-memory-allocatio.patch |    27 -
 target/linux/lantiq/xrx200/config-5.10        |    93 -
 target/linux/lantiq/xway/config-5.10          |    77 -
 target/linux/lantiq/xway_legacy/config-5.10   |    33 -
 target/linux/layerscape/armv7/config-5.10     |   668 -
 target/linux/layerscape/armv8_64b/config-5.10 |   851 --
 ...0-add-DTS-for-Traverse-LS1043-Boards.patch |    26 -
 ...s1021a-Add-LS1021A-IOT-board-support.patch |   291 -
 ...dts-ls1012a-update-with-ppfe-support.patch |   295 -
 ...a-frdm-workaround-by-updating-qspi-f.patch |    41 -
 ...a-rdb-workaround-by-updating-qspi-fl.patch |    29 -
 ...a-rdb-Update-qspi-spi-rx-bus-width-t.patch |    34 -
 ...nor-Use-1-bit-mode-of-spansion-s25fs.patch |    26 -
 .../701-staging-add-fsl_ppfe-driver.patch     | 12036 ----------------
 ...02-phy-Add-2.5G-SGMII-interface-mode.patch |    32 -
 target/linux/malta/config-5.10                |   275 -
 target/linux/mpc85xx/config-5.10              |   269 -
 ...85xx-add-gpio-keys-to-of-match-table.patch |    10 -
 ...0-powerpc-85xx-tl-wdr4900-v1-support.patch |    83 -
 .../101-powerpc-85xx-hiveap-330-support.patch |    30 -
 .../102-powerpc-add-cmdline-override.patch    |    37 -
 .../103-powerpc-85xx-red-15w-rev1.patch       |    29 -
 ...change-P2020RDB-dts-file-for-OpenWRT.patch |   170 -
 .../105-powerpc-85xx-panda-support.patch      |    30 -
 .../106-powerpc-85xx-ws-ap3710i-support.patch |    30 -
 ...-powerpc-85xx-add-ws-ap3825i-support.patch |    65 -
 ...werpc-85xx-firebox-t10-support.patch.patch |    29 -
 ...-powerpc-85xx-add-ws-ap3715i-support.patch |    50 -
 ...ootwrapper-disable-uImage-generation.patch |    42 -
 target/linux/mvebu/config-5.10                |   424 -
 target/linux/mvebu/cortexa53/config-5.10      |   102 -
 target/linux/mvebu/cortexa72/config-5.10      |   115 -
 target/linux/mvebu/cortexa9/config-5.10       |     4 -
 ...s-mcbin-singleshot-add-heartbeat-LED.patch |    65 -
 ...is-omnia-enable-HW-buffer-management.patch |    74 -
 ...rris-omnia-add-comphy-handle-to-eth2.patch |    37 -
 ...rris-omnia-describe-switch-interrupt.patch |    61 -
 ...11-ARM-dts-turris-omnia-add-SFP-node.patch |    90 -
 ...turris-omnia-add-LED-controller-node.patch |   160 -
 ...te-ethernet-phy-node-and-handle-name.patch |    52 -
 ...omnia-fix-hardware-buffer-management.patch |    33 -
 ...mnia-configure-LED-0-pin-function-to.patch |    38 -
 ...ris-omnia-enable-LED-controller-node.patch |    48 -
 ...a-support-HW-controlled-mode-via-pri.patch |   118 -
 ...a-initialize-multi-intensity-to-full.patch |    33 -
 ...a-change-max-brightness-from-255-to-.patch |    31 -
 ...Mangle-bootloader-s-kernel-arguments.patch |   208 -
 ...-mvebu-armada-38x-enable-libata-leds.patch |    10 -
 .../patches-5.10/302-add_powertables.patch    |   770 -
 ...3-linksys_hardcode_nand_ecc_settings.patch |    17 -
 .../patches-5.10/304-revert_i2c_delay.patch   |    15 -
 .../305-armada-385-rd-mtd-partitions.patch    |    19 -
 .../306-ARM-mvebu-385-ap-Add-partitions.patch |    35 -
 ...-armada-xp-linksys-mamba-broken-idle.patch |    10 -
 .../308-armada-xp-linksys-mamba-wan.patch     |    11 -
 .../patches-5.10/309-linksys-status-led.patch |    50 -
 .../310-linksys-use-eth0-as-cpu-port.patch    |    25 -
 .../311-adjust-compatible-for-linksys.patch   |    68 -
 ...da388-clearfog-emmc-on-clearfog-base.patch |    87 -
 .../313-helios4-dts-status-led-alias.patch    |    28 -
 ...rmada-xp-linksys-mamba-resize-kernel.patch |    37 -
 ...316-armada-370-dts-fix-crypto-engine.patch |    29 -
 .../patches-5.10/400-find_active_root.patch   |    60 -
 .../700-mvneta-tx-queue-workaround.patch      |    38 -
 ...14-net-ethernet-marvell-mvnetaMQPrio.patch |   109 -
 ...ethernet-marvell-mvnetaMQPrioOffload.patch |    66 -
 ...xt-ethernet-marvell-mvnetaMQPrioFlag.patch |    30 -
 ...t-ethernet-marvell-mvnetaMQPrioQueue.patch |    97 -
 ...hernet-marvell-mvnetaMQPrioTCOffload.patch |   182 -
 ...dicate-failure-to-enter-deeper-sleep.patch |    40 -
 ...-pci-mvebu-time-out-reset-on-link-up.patch |    60 -
 ...IEI-vendor-prefix-and-IEI-WT61P803-P.patch |   218 -
 ...a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch |  1034 --
 ...d-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch |   501 -
 ...d-the-IEI-WT61P803-PUZZLE-LED-driver.patch |   207 -
 ...I-Add-iei-wt61p803-puzzle-driver-sys.patch |    82 -
 ...mon-Add-iei-wt61p803-puzzle-hwmon-dr.patch |    74 -
 ...an-entry-for-the-IEI-WT61P803-PUZZLE.patch |    41 -
 ...rs-leds-wt61p803-puzzle-improvements.patch |   271 -
 ...ivers-leds-wt61p803-puzzle-mcu-retry.patch |    63 -
 target/linux/octeon/config-5.10               |   250 -
 .../100-mips_image_cmdline_hack.patch         |    38 -
 .../100-ubnt_edgerouter2_support.patch        |    11 -
 .../110-er200-ethernet_probe_order.patch      |    34 -
 .../patches-5.10/120-cmdline-hack.patch       |    47 -
 .../130-itus_shield_support.patch             |    42 -
 .../140-octeon_e300_support.patch             |    18 -
 .../patches-5.10/150-ubnt_usg_support.patch   |    46 -
 .../700-allocate_interface_by_label.patch     |    37 -
 ...-honor_sgmii_node_device_tree_status.patch |    27 -
 target/linux/omap/config-5.10                 |   678 -
 target/linux/pistachio/config-5.10            |   313 -
 ...ine-img-mdc-Handle-early-status-read.patch |    68 -
 ...mg-spfi-Implement-dual-and-quad-mode.patch |   198 -
 ...-device-0-configuration-for-all-devi.patch |    64 -
 ...i-RX-maximum-burst-size-for-DMA-is-8.patch |    59 -
 ...g-spfi-finish-every-transfer-cleanly.patch |   120 -
 ...istachio-Fix-wrong-SDHost-card-speed.patch |    49 -
 ...-img-marduk-switch-mmc-to-1-bit-mode.patch |    47 -
 ...or-support-mtd-name-from-device-tree.patch |    54 -
 ...PS-DTS-img-marduk-Add-SPI-NAND-flash.patch |    30 -
 ...mg-marduk-Add-Cascoda-CA8210-6LoWPAN.patch |    43 -
 ...-DTS-img-marduk-Add-NXP-SC16IS752IPW.patch |    81 -
 ...PS-DTS-img-marduk-Add-partition-name.patch |    27 -
 ...-MIPS-DTS-img-marduk-Add-led-aliases.patch |    27 -
 target/linux/ramips/mt7620/config-5.10        |   197 -
 target/linux/ramips/mt7621/config-5.10        |   294 -
 target/linux/ramips/mt76x8/config-5.10        |   194 -
 ...0-mips-ralink-manage-low-reset-lines.patch |    45 -
 ...t7621-Delay-phy-ports-initialization.patch |    52 -
 .../patches-5.10/200-add-ralink-eth.patch     |    20 -
 ...k-rt288x-select-MIPS_AUTO_PFN_OFFSET.patch |    32 -
 ...1-pci-phy-kconfig-select-regmap-mmio.patch |    10 -
 ...0-mt7620-export-chip-version-and-pkg.patch |    19 -
 ...e-to-enable-disable-the-cevt-r4k-irq.patch |   100 -
 ...IPS-ralink-add-cpu-frequency-scaling.patch |   195 -
 ...-MIPS-add-bootargs-override-property.patch |    63 -
 ...315-owrt-hack-fix-mt7688-cache-issue.patch |    29 -
 ...-select-illegal-access-driver-by-def.patch |    25 -
 ...ort-for-buggy-MT7621S-core-detection.patch |    74 -
 .../322-mt7621-fix-cpu-clk-add-clkdev.patch   |   186 -
 .../323-mt7621-memory-detect.patch            |   129 -
 .../patches-5.10/324-mt7621-perfctr-fix.patch |    15 -
 .../325-mt7621-fix-memory-detect.patch        |    58 -
 ...mtd-cfi-cmdset-0002-force-word-write.patch |    20 -
 ...or-Add-support-for-BoHong-bh25q128as.patch |    75 -
 ...driver-support-for-MT7621-nand-flash.patch |    47 -
 ...documentation-for-mt7621-nand-driver.patch |    85 -
 ...ethernet-mediatek-support-net-labels.patch |    34 -
 ...y-simplify-phy_link_change-arguments.patch |   118 -
 .../721-NET-no-auto-carrier-off-support.patch |    47 -
 ...DT-Add-documentation-for-gpio-ralink.patch |    59 -
 ...alink-add-gpio-driver-for-ralink-SoC.patch |   416 -
 ...support-for-GPIO-as-interrupt-contro.patch |    44 -
 ...621-pinctrl-use-ngpios-not-num-gpios.patch |    11 -
 .../patches-5.10/805-pinctrl-AW9523.patch     |    72 -
 .../810-uvc-add-iPassion-iP2970-support.patch |   245 -
 ...-DT-Add-documentation-for-spi-rt2880.patch |    44 -
 ...SPI-ralink-add-Ralink-SoC-spi-driver.patch |   574 -
 .../825-i2c-MIPS-adds-ralink-I2C-driver.patch |   507 -
 ...IPS-ralink-add-sdhci-for-mt7620a-SoC.patch |    43 -
 .../835-asoc-add-mt7620-support.patch         |  1029 --
 ...erial-add-ugly-custom-baud-rate-hack.patch |    22 -
 .../845-pwm-add-mediatek-support.patch        |   217 -
 .../850-awake-rt305x-dwc2-controller.patch    |    15 -
 .../patches-5.10/855-linkit_bootstrap.patch   |    97 -
 target/linux/ramips/rt288x/config-5.10        |   178 -
 target/linux/ramips/rt305x/config-5.10        |   178 -
 target/linux/ramips/rt3883/config-5.10        |   178 -
 .../rtl8380_d-link_dgs-1210-10mp-f.dts        |   140 -
 .../dts-5.10/rtl8380_engenius_ews2910p.dts    |   229 -
 .../realtek/dts-5.10/rtl8380_hpe_1920-8g.dts  |   115 -
 .../dts-5.10/rtl8380_netgear_gigabit.dtsi     |    85 -
 .../dts-5.10/rtl8380_netgear_gigabit_1xx.dtsi |    60 -
 .../dts-5.10/rtl8380_netgear_gigabit_3xx.dtsi |    60 -
 .../dts-5.10/rtl8380_netgear_gs108t-v3.dts    |    35 -
 .../dts-5.10/rtl8380_netgear_gs110tpp-v1.dts  |    57 -
 .../dts-5.10/rtl8380_netgear_gs308t-v1.dts    |    35 -
 .../dts-5.10/rtl8380_netgear_gs310tp-v1.dts   |    25 -
 .../rtl8380_panasonic_m8eg-pn28080k.dts       |   133 -
 .../dts-5.10/rtl8380_tplink_sg2008p-v1.dts    |    28 -
 .../dts-5.10/rtl8380_tplink_sg2210p-v3.dts    |    16 -
 .../dts-5.10/rtl8380_tplink_sg2xxx.dtsi       |   183 -
 .../dts-5.10/rtl8380_zyxel_gs1900-10hp.dts    |    75 -
 .../dts-5.10/rtl8380_zyxel_gs1900-8.dts       |    12 -
 .../dts-5.10/rtl8380_zyxel_gs1900-8hp-v1.dts  |    12 -
 .../dts-5.10/rtl8380_zyxel_gs1900-8hp-v2.dts  |    12 -
 .../dts-5.10/rtl8380_zyxel_gs1900.dtsi        |   149 -
 .../dts-5.10/rtl8382_allnet_all-sg8208m.dts   |   141 -
 .../dts-5.10/rtl8382_apresia_aplgs120gtss.dts |   270 -
 .../dts-5.10/rtl8382_d-link_dgs-1210-10p.dts  |   102 -
 .../dts-5.10/rtl8382_d-link_dgs-1210-16.dts   |    81 -
 .../dts-5.10/rtl8382_d-link_dgs-1210-20.dts   |    82 -
 .../dts-5.10/rtl8382_d-link_dgs-1210-28.dts   |    11 -
 .../rtl8382_d-link_dgs-1210-28_common.dtsi    |    91 -
 .../rtl8382_d-link_dgs-1210-28mp-f.dts        |    40 -
 .../realtek/dts-5.10/rtl8382_hpe_1920-16g.dts |    48 -
 .../realtek/dts-5.10/rtl8382_hpe_1920-24g.dts |    68 -
 .../realtek/dts-5.10/rtl8382_hpe_1920.dtsi    |   117 -
 .../dts-5.10/rtl8382_inaba_aml2-17gp.dts      |   158 -
 .../dts-5.10/rtl8382_iodata_bsh-g24mb.dts     |   197 -
 .../rtl8382_panasonic_m16eg-pn28160k.dts      |   171 -
 .../rtl8382_panasonic_m24eg-pn28240k.dts      |   190 -
 .../dts-5.10/rtl8382_zyxel_gs1900-16.dts      |    36 -
 .../dts-5.10/rtl8382_zyxel_gs1900-24-v1.dts   |   128 -
 .../dts-5.10/rtl8382_zyxel_gs1900-24e.dts     |    63 -
 .../dts-5.10/rtl8382_zyxel_gs1900-24hp-v1.dts |   125 -
 .../dts-5.10/rtl8382_zyxel_gs1900-24hp-v2.dts |   121 -
 target/linux/realtek/dts-5.10/rtl838x.dtsi    |   287 -
 .../realtek/dts-5.10/rtl838x_hpe_1920.dtsi    |    96 -
 .../dts-5.10/rtl8393_d-link_dgs-1210-52.dts   |   163 -
 .../dts-5.10/rtl8393_netgear_gs750e.dts       |   252 -
 .../rtl8393_panasonic_m48eg-pn28480k.dts      |   380 -
 .../dts-5.10/rtl8393_tplink_sg2452p-v4.dts    |   422 -
 .../dts-5.10/rtl8393_zyxel_gs1900-48.dts      |   320 -
 target/linux/realtek/dts-5.10/rtl839x.dtsi    |   319 -
 .../rtl839x_d-link_dgs-1210_gpio.dtsi         |    75 -
 .../rtl83xx_d-link_dgs-1210_common.dtsi       |    83 -
 .../rtl83xx_d-link_dgs-1210_gpio.dtsi         |    27 -
 .../rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi     |   196 -
 .../dts-5.10/rtl9302_zyxel_xgs1250-12.dts     |   324 -
 target/linux/realtek/dts-5.10/rtl930x.dtsi    |   175 -
 target/linux/realtek/dts-5.10/rtl931x.dtsi    |   200 -
 .../bindings/realtek,otto-timer.yaml          |    85 -
 .../mips/include/asm/mach-rtl838x/ioremap.h   |    29 -
 .../include/asm/mach-rtl838x/mach-rtl83xx.h   |   416 -
 .../arch/mips/kernel/cevt-rtl9300.c           |   200 -
 .../files-5.10/arch/mips/rtl838x/Makefile     |     5 -
 .../files-5.10/arch/mips/rtl838x/Platform     |     5 -
 .../files-5.10/arch/mips/rtl838x/prom.c       |   216 -
 .../files-5.10/arch/mips/rtl838x/setup.c      |   105 -
 .../files-5.10/drivers/clk/realtek/Kconfig    |    19 -
 .../files-5.10/drivers/clk/realtek/Makefile   |     2 -
 .../drivers/clk/realtek/clk-rtl838x-sram.S    |   150 -
 .../drivers/clk/realtek/clk-rtl839x-sram.S    |   142 -
 .../drivers/clk/realtek/clk-rtl83xx.c         |   766 -
 .../drivers/clk/realtek/clk-rtl83xx.h         |    75 -
 .../drivers/clocksource/timer-rtl-otto.c      |   299 -
 .../files-5.10/drivers/gpio/gpio-rtl8231.c    |   355 -
 .../drivers/i2c/busses/i2c-rtl9300.c          |   488 -
 .../drivers/i2c/busses/i2c-rtl9300.h          |    62 -
 .../drivers/i2c/muxes/i2c-mux-rtl9300.c       |   293 -
 .../drivers/net/dsa/rtl83xx/Kconfig           |     8 -
 .../drivers/net/dsa/rtl83xx/Makefile          |     3 -
 .../drivers/net/dsa/rtl83xx/common.c          |  1708 ---
 .../drivers/net/dsa/rtl83xx/debugfs.c         |   730 -
 .../files-5.10/drivers/net/dsa/rtl83xx/dsa.c  |  2234 ---
 .../files-5.10/drivers/net/dsa/rtl83xx/qos.c  |   576 -
 .../drivers/net/dsa/rtl83xx/rtl838x.c         |  2064 ---
 .../drivers/net/dsa/rtl83xx/rtl838x.h         |  1106 --
 .../drivers/net/dsa/rtl83xx/rtl839x.c         |  1948 ---
 .../drivers/net/dsa/rtl83xx/rtl83xx.h         |   137 -
 .../drivers/net/dsa/rtl83xx/rtl930x.c         |  2560 ----
 .../drivers/net/dsa/rtl83xx/rtl931x.c         |  1701 ---
 .../files-5.10/drivers/net/dsa/rtl83xx/tc.c   |   409 -
 .../drivers/net/ethernet/rtl838x_eth.c        |  2588 ----
 .../drivers/net/ethernet/rtl838x_eth.h        |   457 -
 .../files-5.10/drivers/net/phy/rtl83xx-phy.c  |  4018 ------
 .../files-5.10/drivers/net/phy/rtl83xx-phy.h  |    68 -
 .../include/dt-bindings/clock/rtl83xx-clk.h   |    15 -
 ...s-gpio-binding-for-realtek-otto-gpio.patch |   103 -
 ...3-gpio-add-realtek-otto-gpio-support.patch |   394 -
 ...altek-rtl838x-rtl839x-spi-controller.patch |    57 -
 ...ltek-rtl838x-rtl839x-spi-controllers.patch |   248 -
 ...-add-realtek-rtl838x-rtl839x-support.patch |    78 -
 ...rtl838x-rtl839x-interrupt-controller.patch |   211 -
 ...ealtek-otto-fix-gpio-line-irq-offset.patch |    22 -
 ...hdog-add-realtek-otto-watchdog-timer.patch |   467 -
 ...pers-to-extract-clause-45-regad-and-.patch |    53 -
 ...k-otto-Support-reversed-port-layouts.patch |   123 -
 ...ltek-otto-Support-per-cpu-interrupts.patch |   153 -
 ...pio-realtek-otto-Add-RTL930x-support.patch |    29 -
 ...pio-realtek-otto-Add-RTL931x-support.patch |    30 -
 .../300-mips-add-rtl838x-platform.patch       |    97 -
 .../301-gpio-add-rtl8231-driver.patch         |    50 -
 .../302-clocksource-add-otto-driver.patch     |    93 -
 ...e-dependencies-for-gpio-realtek-otto.patch |    25 -
 ...pdate-dependency-for-spi-realtek-rtl.patch |    25 -
 ...pdate-dependency-for-irq-realtek-rtl.patch |    22 -
 ...date-dependency-for-realtek-otto-wdt.patch |    32 -
 ...308-otto-wdt-fix-missing-math-header.patch |    28 -
 .../309-cevt-rtl9300-support.patch            |    54 -
 .../310-add-i2c-rtl9300-support.patch         |    46 -
 .../311-add-i2c-mux-rtl9300-support.patch     |    46 -
 ...chip-irq-realtek-rtl-add-VPE-support.patch |   407 -
 .../316-otto-gpio-uniprocessor-irq-mask.patch |    51 -
 ...io-realtek-otto-switch-to-32-bit-I-O.patch |   373 -
 .../318-add-rtl83xx-clk-support.patch         |    33 -
 ...hip-irq-realtek-rtl-fix-VPE-affinity.patch |   159 -
 ...t-dsa-add-support-for-rtl838x-switch.patch |    40 -
 ...-add-rtl838x-support-for-tag-trailer.patch |    61 -
 ...a-increase-dsa-max-ports-for-rtl838x.patch |    32 -
 ...net-add-support-for-rtl838x-ethernet.patch |    48 -
 ...nclude-linux-add-phy-ops-for-rtl838x.patch |    34 -
 ...vers-net-phy-eee-support-for-rtl838x.patch |    61 -
 ...04-include-linux-add-phy-hsgmii-mode.patch |    33 -
 .../patches-5.10/705-add-rtl-phy.patch        |    39 -
 ...rease-phy-address-number-for-rtl839x.patch |    32 -
 .../patches-5.10/708-brflood-api.patch        |   162 -
 .../patches-5.10/709-lag-offloading.patch     |   781 -
 ...sfp-re-probe-modules-on-DEV_UP-event.patch |    26 -
 ...11-net-phy-add-an-MDIO-SMBus-library.patch |   168 -
 ...12-net-phy-sfp-add-support-for-SMBus.patch |    99 -
 ...e-better-brport-flags-when-ports-lea.patch |   148 -
 ...rt-hardware-assisted-indirect-access.patch |   840 --
 target/linux/realtek/rtl838x/config-5.10      |   227 -
 target/linux/realtek/rtl839x/config-5.10      |   223 -
 target/linux/realtek/rtl930x/config-5.10      |   210 -
 target/linux/realtek/rtl931x/config-5.10      |   224 -
 target/linux/rockchip/armv8/config-5.10       |   644 -
 ...Add-support-for-FriendlyARM-NanoPi-R.patch |   177 -
 ...kchip-add-EEPROM-node-for-NanoPi-R4S.patch |    31 -
 ...-rockchip-use-system-LED-for-OpenWrt.patch |    31 -
 ...usb3-controller-node-for-RK3328-SoCs.patch |    70 -
 ...ckchip-enable-LAN-port-on-NanoPi-R2S.patch |    60 -
 ...dd-OF-node-for-USB-eth-on-NanoPi-R2S.patch |    28 -
 ...-host-by-default-on-rk3399-rock-pi-4.patch |    32 -
 .../105-nanopi-r4s-sd-signalling.patch        |    26 -
 .../patches-5.10/106-r4s-openwrt-leds.patch   |    16 -
 target/linux/sunxi/cortexa53/config-5.10      |    96 -
 target/linux/sunxi/cortexa7/config-5.10       |    26 -
 target/linux/sunxi/cortexa8/config-5.10       |    12 -
 target/linux/tegra/config-5.10                |   483 -
 ...interrupts-due-to-tegra2-silicon-bug.patch |    77 -
 ...enable-front-panel-leds-in-TrimSlice.patch |    46 -
 target/linux/uml/config-5.10                  |   135 -
 ...001-um-Fix-build-w-o-CONFIG_PM_SLEEP.patch |    32 -
 .../uml/patches-5.10/101-mconsole-exec.patch  |   213 -
 .../patches-5.10/102-pseudo-random-mac.patch  |   147 -
 target/linux/x86/64/config-5.10               |   510 -
 target/linux/x86/config-5.10                  |   432 -
 target/linux/x86/generic/config-5.10          |   449 -
 target/linux/x86/geode/config-5.10            |   139 -
 target/linux/x86/legacy/config-5.10           |   220 -
 .../100-fix_cs5535_clockevt.patch             |    13 -
 ..._ich-Enable-GPIO-driver-for-DH89xxCC.patch |    28 -
 ...x86-add-meraki-mx100-platform-driver.patch |   291 -
 ..._atom-Add-Lex-3I380NX-industrial-PC-.patch |    52 -
 .../patches-5.10/300-pcengines_apu1_led.patch |    41 -
 1545 files changed, 254276 deletions(-)
 delete mode 100644 include/kernel-5.10
 delete mode 100644 target/linux/apm821xx/config-5.10
 delete mode 100644 target/linux/apm821xx/patches-5.10/100-dwc2-disable-powerdown.patch
 delete mode 100644 target/linux/apm821xx/patches-5.10/201-add-amcc-apollo3g-support.patch
 delete mode 100644 target/linux/apm821xx/patches-5.10/300-fix-atheros-nics-on-apm82181.patch
 delete mode 100644 target/linux/apm821xx/patches-5.10/301-fix-memory-map-wndr4700.patch
 delete mode 100644 target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch
 delete mode 100644 target/linux/apm821xx/patches-5.10/803-hwmon-tc654-add-detection-routine.patch
 delete mode 100644 target/linux/apm821xx/patches-5.10/804-hwmon-tc654-add-thermal_cooling-device.patch
 delete mode 100644 target/linux/apm821xx/patches-5.10/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch
 delete mode 100644 target/linux/archs38/config-5.10
 delete mode 100644 target/linux/armvirt/32/config-5.10
 delete mode 100644 target/linux/armvirt/64/config-5.10
 delete mode 100644 target/linux/armvirt/config-5.10
 delete mode 100644 target/linux/at91/patches-5.10/101-ARM-at91-build-dtb-for-q5xr5.patch
 delete mode 100644 target/linux/at91/patches-5.10/102-dt-bindings-clock-at91-add-sama7g5-pll-defines.patch
 delete mode 100644 target/linux/at91/patches-5.10/103-clk-at91-sama7g5-allow-SYS-and-CPU-PLLs-to-be-export.patch
 delete mode 100644 target/linux/at91/patches-5.10/104-clk-at91-clk-master-add-5th-divisor-for-mck-master.patch
 delete mode 100644 target/linux/at91/patches-5.10/105-clk-at91-sama7g5-add-5th-divisor-for-mck0-layout-and.patch
 delete mode 100644 target/linux/at91/patches-5.10/106-clk-at91-clk-sam9x60-pll-allow-runtime-changes-for-p.patch
 delete mode 100644 target/linux/at91/patches-5.10/107-clk-at91-sama7g5-remove-mck0-from-parent-list-of-oth.patch
 delete mode 100644 target/linux/at91/patches-5.10/108-clk-at91-sama7g5-decrease-lower-limit-for-MCK0-rate.patch
 delete mode 100644 target/linux/at91/patches-5.10/109-clk-at91-sama7g5-do-not-allow-cpu-pll-to-go-higher-t.patch
 delete mode 100644 target/linux/at91/patches-5.10/110-clk-at91-clk-master-re-factor-master-clock.patch
 delete mode 100644 target/linux/at91/patches-5.10/111-clk-at91-sama7g5-register-cpu-clock.patch
 delete mode 100644 target/linux/at91/patches-5.10/112-clk-at91-Fix-the-declaration-of-the-clocks.patch
 delete mode 100644 target/linux/at91/patches-5.10/113-clk-at91-Trivial-typo-fixes-in-the-file-sama7g5.c.patch
 delete mode 100644 target/linux/at91/patches-5.10/114-clk-at91-sama7g5-remove-all-kernel-doc-kernel-doc-wa.patch
 delete mode 100644 target/linux/at91/patches-5.10/115-net-macb-add-userio-bits-as-platform-configuration.patch
 delete mode 100644 target/linux/at91/patches-5.10/116-net-macb-add-capability-to-not-set-the-clock-rate.patch
 delete mode 100644 target/linux/at91/patches-5.10/117-net-macb-add-function-to-disable-all-macb-clocks.patch
 delete mode 100644 target/linux/at91/patches-5.10/118-net-macb-unprepare-clocks-in-case-of-failure.patch
 delete mode 100644 target/linux/at91/patches-5.10/119-net-macb-add-support-for-sama7g5-gem-interface.patch
 delete mode 100644 target/linux/at91/patches-5.10/120-net-macb-add-support-for-sama7g5-emac-interface.patch
 delete mode 100644 target/linux/at91/patches-5.10/121-ASoC-pcm5102a-Make-codec-selectable.patch
 delete mode 100644 target/linux/at91/patches-5.10/122-ASoC-atmel-i2s-do-not-warn-if-muxclk-is-missing.patch
 delete mode 100644 target/linux/at91/patches-5.10/123-regulator-mcp16502-add-linear_min_sel.patch
 delete mode 100644 target/linux/at91/patches-5.10/124-regulator-mcp16502-adapt-for-get-set-on-other-regist.patch
 delete mode 100644 target/linux/at91/patches-5.10/125-regulator-mcp16502-add-support-for-ramp-delay.patch
 delete mode 100644 target/linux/at91/patches-5.10/126-regulator-mcp16502-remove-void-documentation-of-stru.patch
 delete mode 100644 target/linux/at91/patches-5.10/127-regulator-core-validate-selector-against-linear_min_.patch
 delete mode 100644 target/linux/at91/patches-5.10/128-regulator-core-do-not-continue-if-selector-match.patch
 delete mode 100644 target/linux/at91/patches-5.10/129-regulator-core-return-zero-for-selectors-lower-than-.patch
 delete mode 100644 target/linux/at91/patches-5.10/130-regulator-mcp16502-lpm-pin-can-be-optional-on-some-p.patch
 delete mode 100644 target/linux/at91/patches-5.10/131-pinctrl-at91-pio4-add-support-for-fewer-lines-on-las.patch
 delete mode 100644 target/linux/at91/patches-5.10/132-dmaengine-at_xdmac-adapt-perid-for-mem2mem-operation.patch
 delete mode 100644 target/linux/at91/patches-5.10/133-dmaengine-at_xdmac-add-support-for-sama7g5-based-at_.patch
 delete mode 100644 target/linux/at91/patches-5.10/134-dmaengine-at_xdmac-add-AXI-priority-support-and-reco.patch
 delete mode 100644 target/linux/at91/patches-5.10/135-net-macb-Correct-usage-of-MACB_CAPS_CLK_HW_CHG-flag.patch
 delete mode 100644 target/linux/at91/patches-5.10/136-ARM-at91-sam9x60-SiP-types-added-to-soc-description.patch
 delete mode 100644 target/linux/at91/patches-5.10/137-drivers-soc-atmel-use-GENMASK.patch
 delete mode 100644 target/linux/at91/patches-5.10/138-drivers-soc-atmel-fix-__initconst-should-be-placed-a.patch
 delete mode 100644 target/linux/at91/patches-5.10/139-drivers-soc-atmel-add-per-soc-id-and-version-match-m.patch
 delete mode 100644 target/linux/at91/patches-5.10/140-drivers-soc-atmel-add-support-for-sama7g5.patch
 delete mode 100644 target/linux/at91/patches-5.10/141-drivers-soc-atmel-add-spdx-license-identifier.patch
 delete mode 100644 target/linux/at91/patches-5.10/142-drivers-soc-atmel-fix-type-for-same7.patch
 delete mode 100644 target/linux/at91/patches-5.10/143-clocksource-drivers-timer-microchip-pit64b-Add-clock.patch
 delete mode 100644 target/linux/at91/patches-5.10/144-ASoC-atmel-pdc-Use-managed-DMA-buffer-allocation.patch
 delete mode 100644 target/linux/at91/patches-5.10/145-power-reset-at91-sama5d2_shdwc-add-support-for-sama7.patch
 delete mode 100644 target/linux/at91/patches-5.10/146-pinctrl-at91-pio4-add-support-for-slew-rate.patch
 delete mode 100644 target/linux/at91/patches-5.10/147-pinctrl-at91-pio4-fix-Prefer-unsigned-int-to-bare-us.patch
 delete mode 100644 target/linux/at91/patches-5.10/148-net-macb-Add-default-usrio-config-to-default-gem-con.patch
 delete mode 100644 target/linux/at91/patches-5.10/149-ARM-at91-pm-Move-prototypes-to-mutually-included-hea.patch
 delete mode 100644 target/linux/at91/patches-5.10/150-ASoC-mchp-i2s-mcc-Add-compatible-for-SAMA7G5.patch
 delete mode 100644 target/linux/at91/patches-5.10/151-ASoC-mchp-i2s-mcc-Add-multi-channel-support-for-I2S-.patch
 delete mode 100644 target/linux/at91/patches-5.10/152-ASoC-mchp-i2s-mcc-Add-support-to-select-TDM-pins.patch
 delete mode 100644 target/linux/at91/patches-5.10/153-ASoC-mchp-i2s-mcc-Add-FIFOs-support.patch
 delete mode 100644 target/linux/at91/patches-5.10/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch
 delete mode 100644 target/linux/at91/patches-5.10/155-media-atmel-properly-get-pm_runtime.patch
 delete mode 100644 target/linux/at91/patches-5.10/156-media-atmel-atmel-isc-Remove-redundant-assignment-to.patch
 delete mode 100644 target/linux/at91/patches-5.10/157-media-atmel-atmel-isc-specialize-gamma-table-into-pr.patch
 delete mode 100644 target/linux/at91/patches-5.10/158-media-atmel-atmel-isc-specialize-driver-name-constan.patch
 delete mode 100644 target/linux/at91/patches-5.10/159-media-atmel-atmel-isc-add-checks-for-limiting-frame-.patch
 delete mode 100644 target/linux/at91/patches-5.10/160-media-atmel-atmel-isc-specialize-max-width-and-max-h.patch
 delete mode 100644 target/linux/at91/patches-5.10/161-media-atmel-atmel-isc-specialize-dma-cfg.patch
 delete mode 100644 target/linux/at91/patches-5.10/162-media-atmel-atmel-isc-extract-CSC-submodule-config-i.patch
 delete mode 100644 target/linux/at91/patches-5.10/163-media-atmel-atmel-isc-base-add-id-to-clock-debug-mes.patch
 delete mode 100644 target/linux/at91/patches-5.10/164-media-atmel-atmel-isc-create-register-offsets-struct.patch
 delete mode 100644 target/linux/at91/patches-5.10/165-media-atmel-atmel-isc-extract-CBC-submodule-config-i.patch
 delete mode 100644 target/linux/at91/patches-5.10/166-media-atmel-atmel-isc-add-CBC-to-the-reg-offsets-str.patch
 delete mode 100644 target/linux/at91/patches-5.10/167-media-atmel-atmel-isc-add-SUB422-and-SUB420-to-regis.patch
 delete mode 100644 target/linux/at91/patches-5.10/168-media-atmel-atmel-isc-add-RLP-to-register-offsets.patch
 delete mode 100644 target/linux/at91/patches-5.10/169-media-atmel-atmel-isc-add-HIS-to-register-offsets.patch
 delete mode 100644 target/linux/at91/patches-5.10/170-media-atmel-atmel-isc-add-DMA-to-register-offsets.patch
 delete mode 100644 target/linux/at91/patches-5.10/171-media-atmel-atmel-isc-add-support-for-version-regist.patch
 delete mode 100644 target/linux/at91/patches-5.10/172-media-atmel-atmel-isc-add-his_entry-to-register-offs.patch
 delete mode 100644 target/linux/at91/patches-5.10/173-media-atmel-atmel-isc-add-register-description-for-a.patch
 delete mode 100644 target/linux/at91/patches-5.10/174-media-atmel-atmel-isc-extend-pipeline-with-extra-mod.patch
 delete mode 100644 target/linux/at91/patches-5.10/175-media-atmel-atmel-isc-add-CC-initialization-function.patch
 delete mode 100644 target/linux/at91/patches-5.10/176-media-atmel-atmel-isc-create-product-specific-v4l2-c.patch
 delete mode 100644 target/linux/at91/patches-5.10/177-media-atmel-atmel-isc-create-callback-for-DPC-submod.patch
 delete mode 100644 target/linux/at91/patches-5.10/178-media-atmel-atmel-isc-create-callback-for-GAM-submod.patch
 delete mode 100644 target/linux/at91/patches-5.10/179-media-atmel-atmel-isc-create-callback-for-RLP-submod.patch
 delete mode 100644 target/linux/at91/patches-5.10/180-media-atmel-atmel-isc-move-the-formats-list-into-pro.patch
 delete mode 100644 target/linux/at91/patches-5.10/181-media-atmel-atmel-isc-create-an-adapt-pipeline-callb.patch
 delete mode 100644 target/linux/at91/patches-5.10/182-media-atmel-atmel-isc-regs-add-additional-fields-for.patch
 delete mode 100644 target/linux/at91/patches-5.10/183-media-atmel-atmel-isc-base-add-support-for-more-form.patch
 delete mode 100644 target/linux/at91/patches-5.10/184-media-atmel-atmel-isc-sama5d2-remove-duplicate-defin.patch
 delete mode 100644 target/linux/at91/patches-5.10/185-media-atmel-atmel-isc-add-microchip-xisc-driver.patch
 delete mode 100644 target/linux/at91/patches-5.10/186-ASoC-atmel-fix-shadowed-variable.patch
 delete mode 100644 target/linux/at91/patches-5.10/187-ASoC-atmel-atmel-i2s-remove-useless-initialization.patch
 delete mode 100644 target/linux/at91/patches-5.10/188-ASoC-atmel-i2s-Set-symmetric-sample-bits.patch
 delete mode 100644 target/linux/at91/patches-5.10/189-watchdog-sama5d4_wdt-add-support-for-sama7g5-wdt.patch
 delete mode 100644 target/linux/at91/patches-5.10/190-media-atmel-fix-build-when-ISC-m-and-XISC-y.patch
 delete mode 100644 target/linux/at91/patches-5.10/191-i2c-at91-remove-define-CONFIG_PM.patch
 delete mode 100644 target/linux/at91/patches-5.10/192-ASoC-codecs-ad193x-add-support-for-96kHz-and-192kHz-.patch
 delete mode 100644 target/linux/at91/patches-5.10/193-media-atmel-atmel-sama5d2-isc-fix-YUYV-format.patch
 delete mode 100644 target/linux/at91/patches-5.10/194-clk-at91-add-register-definition-for-sama7g5-s-maste.patch
 delete mode 100644 target/linux/at91/patches-5.10/195-ARM-at91-add-new-SoC-sama7g5.patch
 delete mode 100644 target/linux/at91/patches-5.10/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch
 delete mode 100644 target/linux/at91/patches-5.10/197-ARM-at91-pm-move-pm_bu-to-soc_pm-data-structure.patch
 delete mode 100644 target/linux/at91/patches-5.10/198-ARM-at91-pm-move-the-setup-of-soc_pm.bu-suspended.patch
 delete mode 100644 target/linux/at91/patches-5.10/199-ARM-at91-pm-document-at91_soc_pm-structure.patch
 delete mode 100644 target/linux/at91/patches-5.10/200-ARM-at91-pm-check-for-different-controllers-in-at91_.patch
 delete mode 100644 target/linux/at91/patches-5.10/201-ARM-at91-pm-do-not-initialize-pdev.patch
 delete mode 100644 target/linux/at91/patches-5.10/202-ARM-at91-pm-use-r7-instead-of-tmp1.patch
 delete mode 100644 target/linux/at91/patches-5.10/203-ARM-at91-pm-avoid-push-and-pop-on-stack-while-memory.patch
 delete mode 100644 target/linux/at91/patches-5.10/204-ARM-at91-pm-s-CONFIG_SOC_SAM9X60-CONFIG_HAVE_AT91_SA.patch
 delete mode 100644 target/linux/at91/patches-5.10/205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch
 delete mode 100644 target/linux/at91/patches-5.10/206-ARM-at91-sfrbu-add-sfrbu-registers-definitions-for-s.patch
 delete mode 100644 target/linux/at91/patches-5.10/207-ARM-at91-ddr-add-registers-definitions-for-sama7g5-s.patch
 delete mode 100644 target/linux/at91/patches-5.10/208-ARM-at91-pm-add-self-refresh-support-for-sama7g5.patch
 delete mode 100644 target/linux/at91/patches-5.10/209-ARM-at91-pm-add-support-for-MCK1.4-save-restore-for-.patch
 delete mode 100644 target/linux/at91/patches-5.10/210-ARM-at91-pm-add-support-for-2.5V-LDO-regulator-contr.patch
 delete mode 100644 target/linux/at91/patches-5.10/211-ARM-at91-pm-wait-for-ddr-power-mode-off.patch
 delete mode 100644 target/linux/at91/patches-5.10/212-ARM-at91-pm-add-sama7g5-ddr-controller.patch
 delete mode 100644 target/linux/at91/patches-5.10/213-ARM-at91-pm-add-sama7g5-ddr-phy-controller.patch
 delete mode 100644 target/linux/at91/patches-5.10/214-ARM-at91-pm-save-ddr-phy-calibration-data-to-securam.patch
 delete mode 100644 target/linux/at91/patches-5.10/215-ARM-at91-pm-add-backup-mode-support-for-SAMA7G5.patch
 delete mode 100644 target/linux/at91/patches-5.10/216-ARM-at91-pm-add-sama7g5-s-pmc.patch
 delete mode 100644 target/linux/at91/patches-5.10/217-ARM-at91-sama7-introduce-sama7-SoC-family.patch
 delete mode 100644 target/linux/at91/patches-5.10/218-ARM-at91-pm-add-pm-support-for-SAMA7G5.patch
 delete mode 100644 target/linux/at91/patches-5.10/219-ARM-at91-pm-add-sama7g5-shdwc.patch
 delete mode 100644 target/linux/at91/patches-5.10/220-ARM-configs-at91-add-defconfig-for-sama7-family-of-S.patch
 delete mode 100644 target/linux/at91/patches-5.10/221-ARM-multi_v7_defconfig-add-sama7g5-SoC.patch
 delete mode 100644 target/linux/at91/patches-5.10/222-ARM-dts-at91-add-sama7g5-SoC-DT-and-sama7g5-ek.patch
 delete mode 100644 target/linux/at91/patches-5.10/223-ARM-at91-pm-do-not-panic-if-ram-controllers-are-not-.patch
 delete mode 100644 target/linux/at91/patches-5.10/224-ARM-dts-at91-sama7g5-add-ram-controllers.patch
 delete mode 100644 target/linux/at91/patches-5.10/225-ARM-dts-at91-sama7g5-add-securam-node.patch
 delete mode 100644 target/linux/at91/patches-5.10/226-ARM-dts-at91-sama7g5-add-shdwc-node.patch
 delete mode 100644 target/linux/at91/patches-5.10/227-ARM-dts-at91-sama7g5-add-chipid.patch
 delete mode 100644 target/linux/at91/patches-5.10/228-ARM-at91-pm-switch-backup-area-to-vbat-in-backup-mod.patch
 delete mode 100644 target/linux/at91/patches-5.10/229-ARM-dts-at91-sama7g5ek-add-suspend-voltage-for-ddr3l.patch
 delete mode 100644 target/linux/at91/patches-5.10/230-ARM-at91-pm-group-constants-and-addresses-loading.patch
 delete mode 100644 target/linux/at91/patches-5.10/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch
 delete mode 100644 target/linux/at91/patches-5.10/232-ARM-dts-at91-sama7g5ek-use-proper-slew-rate-settings.patch
 delete mode 100644 target/linux/at91/patches-5.10/233-ARM-dts-at91-sama7g5ek-to-not-touch-slew-rate-for-SD.patch
 delete mode 100644 target/linux/at91/patches-5.10/234-clk-at91-re-factor-clocks-suspend-resume.patch
 delete mode 100644 target/linux/at91/patches-5.10/235-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch
 delete mode 100644 target/linux/at91/patches-5.10/236-clk-at91-sama7g5-add-securam-s-peripheral-clock.patch
 delete mode 100644 target/linux/at91/patches-5.10/237-clk-at91-clk-master-add-register-definition-for-sama.patch
 delete mode 100644 target/linux/at91/patches-5.10/238-clk-at91-clk-master-improve-readability-by-using-loc.patch
 delete mode 100644 target/linux/at91/patches-5.10/239-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch
 delete mode 100644 target/linux/at91/patches-5.10/240-clk-at91-clk-master-check-if-div-or-pres-is-zero.patch
 delete mode 100644 target/linux/at91/patches-5.10/241-clk-at91-clk-master-mask-mckr-against-layout-mask.patch
 delete mode 100644 target/linux/at91/patches-5.10/242-clk-at91-clk-master-fix-prescaler-logic.patch
 delete mode 100644 target/linux/at91/patches-5.10/243-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch
 delete mode 100644 target/linux/at91/patches-5.10/244-clk-at91-clk-master-add-notifier-for-divider.patch
 delete mode 100644 target/linux/at91/patches-5.10/245-clk-at91-sama7g5-remove-prescaler-part-of-master-clo.patch
 delete mode 100644 target/linux/at91/patches-5.10/246-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch
 delete mode 100644 target/linux/at91/patches-5.10/247-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch
 delete mode 100644 target/linux/at91/patches-5.10/99-scripts-fix-compilation-error.patch
 delete mode 100644 target/linux/at91/sam9x/config-5.10
 delete mode 100644 target/linux/at91/sama5/config-5.10
 delete mode 100644 target/linux/at91/sama7/config-5.10
 delete mode 100644 target/linux/ath25/config-5.10
 delete mode 100644 target/linux/ath25/patches-5.10/107-ar5312_gpio.patch
 delete mode 100644 target/linux/ath25/patches-5.10/108-ar2315_gpio.patch
 delete mode 100644 target/linux/ath25/patches-5.10/110-ar2313_ethernet.patch
 delete mode 100644 target/linux/ath25/patches-5.10/120-spiflash.patch
 delete mode 100644 target/linux/ath25/patches-5.10/130-watchdog.patch
 delete mode 100644 target/linux/ath25/patches-5.10/140-redboot_boardconfig.patch
 delete mode 100644 target/linux/ath25/patches-5.10/141-redboot_partition_scan.patch
 delete mode 100644 target/linux/ath25/patches-5.10/142-redboot_various_erase_size_fix.patch
 delete mode 100644 target/linux/ath25/patches-5.10/210-reset_button.patch
 delete mode 100644 target/linux/ath25/patches-5.10/220-enet_micrel_workaround.patch
 delete mode 100644 target/linux/ath25/patches-5.10/330-board_leds.patch
 delete mode 100644 target/linux/ath25/patches-5.10/700-swconfig_mvswitch.patch
 delete mode 100644 target/linux/ath79/config-5.10
 delete mode 100644 target/linux/ath79/patches-5.10/0003-leds-add-reset-controller-based-driver.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0004-phy-add-ath79-usb-phys.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0005-usb-add-more-OF-quirk-properties.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0018-MIPS-pci-ar71xx-convert-to-OF.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0020-MIPS-pci-ar724x-convert-to-OF.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0032-MIPS-ath79-sanitize-symbols.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0033-spi-ath79-drop-pdata-support.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0034-MIPS-ath79-ath9k-exports.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0036-MIPS-ath79-remove-irq-code-from-pci.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0037-missing-registers.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0039-MIPS-ath79-export-UART1-reference-clock.patch
 delete mode 100644 target/linux/ath79/patches-5.10/004-register_gpio_driver_earlier.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0040-ath79-sgmii-config.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0052-mtd-spi-nor-use-4-bit-locking-for-MX25L12805D.patch
 delete mode 100644 target/linux/ath79/patches-5.10/0062-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch
 delete mode 100644 target/linux/ath79/patches-5.10/401-mtd-nor-support-mtd-name-from-device-tree.patch
 delete mode 100644 target/linux/ath79/patches-5.10/402-v5.17-spi-ar934x-fix-transfer-and-word-delays.patch
 delete mode 100644 target/linux/ath79/patches-5.10/403-v5.17-spi-ar934x-fix-transfer-size.patch
 delete mode 100644 target/linux/ath79/patches-5.10/404-mtd-cybertan-trx-parser.patch
 delete mode 100644 target/linux/ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch
 delete mode 100644 target/linux/ath79/patches-5.10/412-spi-ath79-set-number-of-chipselect-lines.patch
 delete mode 100644 target/linux/ath79/patches-5.10/420-net-use-downstream-ag71xx.patch
 delete mode 100644 target/linux/ath79/patches-5.10/425-at803x-allow-sgmii-aneg-override.patch
 delete mode 100644 target/linux/ath79/patches-5.10/430-drivers-link-spi-before-mtd.patch
 delete mode 100644 target/linux/ath79/patches-5.10/440-mtd-ar934x-nand-driver.patch
 delete mode 100644 target/linux/ath79/patches-5.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
 delete mode 100644 target/linux/ath79/patches-5.10/900-mdio_bitbang_ignore_ta_value.patch
 delete mode 100644 target/linux/ath79/patches-5.10/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
 delete mode 100644 target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch
 delete mode 100644 target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch
 delete mode 100644 target/linux/ath79/patches-5.10/930-ar8216-make-reg-access-atomic.patch
 delete mode 100644 target/linux/ath79/patches-5.10/939-mikrotik-rb91x.patch
 delete mode 100644 target/linux/ath79/patches-5.10/940-ath79-add-support-for-booting-QCN550x.patch
 delete mode 100644 target/linux/bcm47xx/config-5.10
 delete mode 100644 target/linux/bcm47xx/patches-5.10/030-v5.17-0001-MIPS-BCM47XX-Define-Linksys-WRT310N-V2-buttons.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/030-v5.17-0002-MIPS-BCM47XX-Add-board-entry-for-Linksys-WRT320N-v1.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/030-v5.17-0003-MIPS-BCM47XX-Add-LEDs-and-buttons-for-Asus-RTN-10U.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/030-v5.17-0004-MIPS-BCM47XX-Add-support-for-Netgear-R6300-v1.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/030-v5.17-0005-MIPS-BCM47XX-Add-support-for-Netgear-WN2500RP-v1-v2.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/031-v6.0-MIPS-BCM47XX-Add-support-for-Netgear-WNR3500L-v2.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/032-v6.3-MIPS-BCM47XX-Add-support-for-Linksys-E2500-V3.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/100-v5.18-mtd-rawnand-brcmnand-Assign-soc-as-early-as-possible.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/101-v5.18-mtd-rawnand-brcmnand-Allow-SoC-to-provide-I-O-operations.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/102-v5.18-mtd-rawnand-brcmnand-Avoid-pdev-in-brcmnand_init_cs.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/103-v5.18-mtd-rawnand-brcmnand-Move-OF-operations-out-of-brcmnand_init_cs.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/104-v5.18-mtd-rawnand-brcmnand-Allow-working-without-interrupts.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/105-v5.18-mtd-rawnand-brcmnand-Add-platform-data-structure-for-BCMA.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/106-v5.18-mtd-rawnand-brcmnand-Allow-platform-data-instantation.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/107-v5.18-mtd-rawnand-brcmnand-BCMA-controller-uses-command-shift-of-0.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/108-v5.18-mtd-rawnand-brcmnand-Add-BCMA-shim.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/130-MIPS-BCM47XX-Add-support-for-Huawei-B593u-12.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/159-cpu_fixes.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/160-kmap_coherent.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/209-b44-register-adm-switch.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/210-b44_phy_fix.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/280-activate_ssb_support_in_usb.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/300-fork_cacheflush.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/310-no_highpage.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/400-mtd-bcm47xxpart-get-nvram.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/610-pci_ide_fix.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/700-net-bgmac-connect-to-PHY-even-if-it-is-BGMAC_PHY_NOR.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/701-net-bgmac-connect-to-PHY-even-if-it-is-BGMAC_PHY_NOR.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/791-tg3-no-pci-sleep.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/820-wgt634u-nvram-fix.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/830-huawei_e970_support.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/831-old_gpio_wdt.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/940-bcm47xx-yenta.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/976-ssb_increase_pci_delay.patch
 delete mode 100644 target/linux/bcm47xx/patches-5.10/999-wl_exports.patch
 delete mode 100644 target/linux/bcm4908/config-5.10
 delete mode 100644 target/linux/bcm4908/files-5.10/drivers/net/ethernet/broadcom/unimac.h
 delete mode 100644 target/linux/bcm4908/patches-5.10/030-v5.11-0001-dt-bindings-arm-bcm-document-BCM4908-bindings.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/030-v5.11-0003-v5.11-arm64-add-config-for-Broadcom-BCM4908-SoCs.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/031-v5.12-0001-dt-bindings-arm-bcm-document-Netgear-R8000P-binding.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/031-v5.12-0002-arm64-dts-broadcom-bcm4908-add-BCM4906-Netgear-R8000.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/031-v5.12-0003-arm64-dts-broadcom-bcm4908-use-proper-NAND-binding.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/031-v5.12-0004-arm64-dts-broadcom-bcm4908-describe-PCIe-reset-contr.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/031-v5.12-0005-arm64-dts-broadcom-bcm4908-describe-internal-switch.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/031-v5.12-0006-arm64-dts-broadcom-bcm4908-describe-PMB-block.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/032-v5.13-0001-arm64-dts-broadcom-bcm4908-describe-USB-PHY.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/032-v5.13-0002-arm64-dts-broadcom-bcm4908-describe-Ethernet-control.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/032-v5.13-0003-arm64-dts-broadcom-bcm4908-describe-Netgear-R8000P-s.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/032-v5.13-0004-arm64-dts-broadcom-bcm4908-add-remaining-Netgear-R80.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/032-v5.13-0005-arm64-dts-broadcom-bcm4908-describe-firmware-partiti.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/032-v5.13-0006-arm64-dts-broadcom-bcm4908-fix-switch-parent-node-na.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/032-v5.13-0007-dt-bindings-arm-bcm-document-TP-Link-Archer-C2300-bi.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/032-v5.13-0008-arm64-dts-broadcom-bcm4908-add-TP-Link-Archer-C2300-.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/032-v5.13-0009-arm64-dts-broadcom-bcm4908-set-Asus-GT-AC5300-port-7.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/032-v5.13-0010-arm64-dts-broadcom-bcm4908-add-Ethernet-TX-irq.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/032-v5.13-0011-arm64-dts-broadcom-bcm4908-add-Ethernet-MAC-addr.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/033-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/034-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/034-v5.16-0002-arm64-dts-broadcom-bcm4908-Move-reboot-syscon-out-of.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/034-v5.16-0003-arm64-dts-broadcom-bcm4908-Fix-UART-clock-name.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/035-v5.17-0001-dt-bindings-arm-bcm-document-Netgear-RAXE500-binding.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/035-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/036-v5.18-0001-arm64-dts-broadcom-bcm4908-use-proper-TWD-binding.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/036-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/036-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/036-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/037-v5.20-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/037-v5.20-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/037-v5.20-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/037-v5.20-0004-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63146.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/037-v5.20-0005-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6856.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/037-v5.20-0006-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6813.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/037-v5.20-0007-arm64-dts-broadcom-align-gpio-key-node-names-with-dt.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/037-v5.20-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/037-v5.20-0009-arm64-dts-broadcom-bcm4908-Fix-cpu-node-for-smp-boot.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/037-v5.20-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/037-v5.20-0011-arm64-bcmbca-add-arch-bcmbca-machine-entry.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/038-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/038-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/038-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/038-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/038-v6.1-0006-arm64-dts-Add-BCM4908-generic-board-dts.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/039-v6.2-0001-arm64-dts-broadcom-bcmbca-bcm4908-add-TWD-block-time.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/039-v6.2-0002-arm64-dts-broadcom-bcmbca-bcm6858-add-TWD-block.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/039-v6.2-0003-arm64-dts-Update-cache-properties-for-broadcom.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/040-v6.1-mtd-parsers-add-Broadcom-s-U-Boot-parser.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/040-v6.4-0001-arm64-dts-broadcom-bcmbca-Add-spi-controller-node.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/040-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/040-v6.4-0003-arm64-dts-broadcom-bcmbca-bcm4908-fix-LED-nodenames.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/040-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/040-v6.4-0005-arm64-dts-broadcom-bcmbca-bcm4908-add-on-SoC-USB-por.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/040-v6.4-0006-arm64-dts-broadcom-bcmbca-bcm4908-add-Netgear-R8000P.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/040-v6.4-0007-arm64-dts-broadcom-bcmbca-bcm4908-add-TP-Link-C2300-.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/071-v5.12-0001-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/071-v5.12-0002-net-dsa-bcm_sf2-use-2-Gbps-IMP-port-link-on-BCM4908.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/072-v5.12-0001-dt-bindings-net-document-BCM4908-Ethernet-controller.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/072-v5.12-0002-net-broadcom-bcm4908enet-add-BCM4908-controller-driv.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0001-dt-bindings-net-rename-BCM4908-Ethernet-binding.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0002-dt-bindings-net-bcm4908-enet-include-ethernet-contro.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0003-net-broadcom-rename-BCM4908-driver-update-DT-binding.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0004-net-broadcom-bcm4908_enet-drop-unneeded-memset.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0005-net-broadcom-bcm4908_enet-drop-inline-from-C-functio.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0006-net-broadcom-bcm4908_enet-fix-minor-typos.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0007-net-broadcom-bcm4908_enet-fix-received-skb-length.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0008-net-broadcom-bcm4908_enet-fix-endianness-in-xmit-cod.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0009-net-broadcom-bcm4908_enet-set-MTU-on-open-on-request.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0010-net-broadcom-bcm4908_enet-fix-RX-path-possible-mem-l.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0011-net-broadcom-bcm4908_enet-fix-NAPI-poll-returned-val.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0012-net-broadcom-bcm4908_enet-enable-RX-after-processing.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/073-v5.12-0013-net-broadcom-BCM4908_ENET-should-not-default-to-y-un.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/074-v5.13-0001-net-broadcom-bcm4908_enet-read-MAC-from-OF.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/074-v5.13-0002-dt-bindings-net-bcm4908-enet-add-optional-TX-interru.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/074-v5.13-0003-net-broadcom-bcm4908_enet-support-TX-interrupt.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/075-v5.13-0001-net-dsa-bcm_sf2-store-PHY-interface-mode-in-port-str.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/075-v5.13-0003-net-dsa-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/075-v5.13-0004-net-dsa-bcm_sf2-add-function-finding-RGMII-register.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/075-v5.13-0005-net-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/075-v5.13-0006-net-dsa-bcm_sf2-Fix-bcm_sf2_reg_rgmii_cntrl-call-for.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/076-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/077-v5.14-net-broadcom-bcm4908_enet-reset-DMA-rings-sw-indexes.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/077-v5.17-net-broadcom-bcm4908enet-remove-redundant-variable-b.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/078-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/078-v6.1-0002-net-broadcom-bcm4908_enet-update-TX-stats-after-actu.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/079-v6.2-0001-net-broadcom-bcm4908_enet-use-build_skb.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/079-v6.2-0002-net-broadcom-bcm4908_enet-report-queued-and-transmit.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/080-v5.11-tty-serial-bcm63xx-lower-driver-dependencies.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/081-v5.12-reset-simple-add-BCM4908-MISC-PCIe-reset-controller-.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/082-v5.12-0001-dt-bindings-power-document-Broadcom-s-PMB-binding.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/082-v5.12-0002-soc-bcm-add-PM-driver-for-Broadcom-s-PMB.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/082-v5.12-0003-soc-bcm-brcmstb-add-stubs-for-getting-platform-IDs.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/085-v5.18-0001-dt-bindings-pinctrl-Add-binding-for-BCM4908-pinctrl.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/085-v5.18-0002-pinctrl-bcm-add-driver-for-BCM4908-pinmux.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/086-v5.12-0003-dt-bindings-phy-brcm-brcmstb-usb-phy-convert-to-the-.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/086-v5.12-0004-dt-bindings-phy-brcm-brcmstb-usb-phy-add-BCM4908-bin.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/086-v5.13-0001-phy-phy-brcm-usb-select-SOC_BRCMSTB-on-brcmstb-only.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/086-v5.13-0002-dt-bindings-phy-brcm-brcmstb-usb-phy-add-power-domai.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/087-v5.18-0001-i2c-brcmstb-allow-compiling-on-BCM4908.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/088-v5.18-phy-phy-brcm-usb-fixup-BCM4908-support.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/089-v5.18-watchdog-allow-building-BCM7038_WDT-for-BCM4908.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/090-v5.20-watchdog-bcm7038_wdt-Support-BCM6345-compatible-stri.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/400-mtd-rawnand-brcmnand-disable-WP-on-BCM4908.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch
 delete mode 100644 target/linux/bcm4908/patches-5.10/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
 delete mode 100644 target/linux/bcm53xx/config-5.10
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0001-ARM-dts-BCM5301X-Linksys-EA9500-add-port-5-and-port-.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0002-ARM-dts-BCM5301X-Harmonize-EHCI-OHCI-DT-nodes-name.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0003-ARM-dts-BCM5310X-Harmonize-xHCI-DT-nodes-name.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0004-ARM-dts-BCM5301X-Linksys-EA9500-add-fixed-partitions.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0005-ARM-dts-BCM5301X-Use-corretc-pinctrl-compatible-for-.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0006-ARM-dts-BCM5301X-Linksys-EA9500-make-use-of-pinctrl.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0007-ARM-dts-BCM5301X-Move-CRU-devices-to-the-CRU-node.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0008-ARM-dts-BCM5301X-Disable-USB-3-PHY-on-devices-withou.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0009-ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0010-ARM-dts-BCM5301X-Update-Ethernet-switch-node-name.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0011-ARM-dts-BCM5301X-Add-a-default-compatible-for-switch.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0012-ARM-dts-BCM5301X-Provide-defaults-ports-container-no.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0013-ARM-dts-NSP-Update-ethernet-switch-node-name.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0014-ARM-dts-NSP-Fix-Ethernet-switch-SGMII-register-name.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0015-ARM-dts-NSP-Add-a-SRAB-compatible-string-for-each-bo.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/030-v5.11-0016-ARM-dts-NSP-Provide-defaults-ports-container-node.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/031-v5.13-0002-ARM-dts-BCM5301X-Describe-NVMEM-NVRAM-on-Linksys-Lux.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/031-v5.13-0003-ARM-dts-BCM5301X-Fix-Linksys-EA9500-partitions.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/031-v5.13-0004-ARM-dts-BCM5301X-Set-Linksys-EA9500-power-LED.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/032-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/032-v5.14-0002-ARM-dts-BCM5301X-Fix-pinmux-subnodes-names.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.15-0001-ARM-dts-NSP-add-device-names-to-compatible.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.15-0002-ARM-dts-NSP-enable-DMA-on-bcm988312hr.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.15-0003-ARM-dts-NSP-disable-qspi-node-by-default.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.15-0004-ARM-dts-NSP-add-MDIO-bus-controller-node.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.15-0005-ARM-dts-NSP-Move-USB3-PHY-to-internal-MDIO-bus.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.15-0006-ARM-dts-NSP-Add-common-bindings-for-MX64-MX65.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.15-0007-ARM-dts-NSP-Add-Ax-stepping-modifications.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.15-0008-ARM-dts-NSP-Add-DT-files-for-Meraki-MX64-series.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.15-0009-ARM-dts-NSP-Add-DT-files-for-Meraki-MX65-series.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.15-0010-ARM-dts-BCM5301X-Fix-nodes-names.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.15-0011-ARM-dts-BCM5301X-Fix-MDIO-mux-binding.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.16-0013-ARM-dts-NSP-Add-bcm958623hr-board-name-to-dts.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.16-0015-ARM-dts-NSP-Fix-MDIO-mux-node-names.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.16-0016-ARM-dts-NSP-Fix-MX64-MX65-eeprom-node-name.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.16-0017-ARM-dts-NSP-Fix-MX65-MDIO-mux-warnings.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.16-0018-ARM-dts-BCM5301X-Specify-switch-ports-for-more-devic.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.16-0019-ARM-dts-BCM53573-Describe-on-SoC-BCM53125-rev-4-swit.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.16-0020-ARM-dts-BCM53573-Add-Tenda-AC9-switch-ports.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.16-0021-ARM-BCM53016-Specify-switch-ports-for-Meraki-MR32.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.16-0022-ARM-BCM53016-MR32-get-mac-address-from-nvmem.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/033-v5.16-0023-ARM-dts-BCM5301X-Add-DT-for-Asus-RT-AC88U.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0001-ARM-dts-NSP-MX65-add-qca8k-falling-edge-PLL-properti.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0002-ARM-dts-BCM5301X-remove-unnecessary-address-size-cel.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0003-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0004-ARM-BCM53016-MR32-convert-to-Broadcom-iProc-I2C-Driv.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0005-ARM-dts-BCM5301X-update-CRU-block-description.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0006-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0007-ARM-dts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0008-ARM-dts-NSP-Rename-SATA-unit-name.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0009-ARM-dts-BCM5301X-correct-RX-delay-and-enable-flow-co.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0010-Revert-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-A.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/035-v5.18-0001-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/035-v5.18-0002-ARM-dts-NSP-MX6X-get-mac-address-from-eeprom.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/035-v5.18-0004-ARM-dts-BCM5301X-Add-Ethernet-MAC-address-to-Luxul-X.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0001-ARM-dts-BCM5301X-Update-pin-controller-node-name.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0002-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-node.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0003-ARM-dts-BCM5301X-Remove-cell-properties-from-srab-po.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0004-ARM-dts-BCM5301X-Add-rgmii-to-port-5-of-Broadcom-swi.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0005-ARM-dts-BCM5301X-Retrieve-gmac1-MAC-address-from-NVR.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0006-ARM-dts-BCM5301X-Fix-compatible-strings-for-BCM53012.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0007-ARM-dts-BCM5301X-Disable-gmac0-and-enable-port-8-on-.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0008-ARM-dts-BCM5301X-Add-DT-for-WZR-1166DHP-DHP2.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0009-Revert-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-nod.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/037-v6.0-0001-ARM-dts-broadcom-align-gpio-key-node-names-with-dtsc.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/037-v6.0-0002-ARM-dts-broadcom-correct-gpio-keys-properties.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/039-v6.2-bcma-support-SPROM-rev-11.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/070-v5.17-phy-bcm-ns-usb2-support-updated-DT-binding-with-PHY-.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/080-v5.13-0001-dt-bindings-nvmem-add-Broadcom-s-NVRAM.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/315-ARM-dts-BCM5301X-Extend-RAM-to-full-256MB-for-Linksy.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/321-ARM-dts-BCM5301X-Describe-partition-formats.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/600-net-disable-GRO-by-default.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/800-0001-firmware-bcm47xx_nvram-support-init-from-IO-memory.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/800-0002-nvmem-brcm_nvram-provide-NVMEM-content-to-the-NVRAM-.patch
 delete mode 100644 target/linux/bcm53xx/patches-5.10/905-BCM53573-minor-hacks.patch
 delete mode 100644 target/linux/gemini/config-5.10
 delete mode 100644 target/linux/gemini/patches-5.10/0001-usb-host-fotg2-add-Gemini-specific-handling.patch
 delete mode 100644 target/linux/gemini/patches-5.10/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch
 delete mode 100644 target/linux/generic/backport-5.10/005-v5.17-01-Kbuild-use-Wdeclaration-after-statement.patch
 delete mode 100644 target/linux/generic/backport-5.10/005-v5.17-02-Kbuild-move-to-std-gnu11.patch
 delete mode 100644 target/linux/generic/backport-5.10/005-v5.17-03-Kbuild-use-std-gnu11-for-KBUILD_USERCFLAGS.patch
 delete mode 100644 target/linux/generic/backport-5.10/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch
 delete mode 100644 target/linux/generic/backport-5.10/011-kbuild-export-SUBARCH.patch
 delete mode 100644 target/linux/generic/backport-5.10/026-power-reset-linkstation-poweroff-add-missing-put_dev.patch
 delete mode 100644 target/linux/generic/backport-5.10/050-v5.16-00-MIPS-uasm-Enable-muhu-opcode-for-MIPS-R6.patch
 delete mode 100644 target/linux/generic/backport-5.10/050-v5.16-01-mips-uasm-Add-workaround-for-Loongson-2F-nop-CPU-err.patch
 delete mode 100644 target/linux/generic/backport-5.10/050-v5.16-02-mips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch
 delete mode 100644 target/linux/generic/backport-5.10/050-v5.16-03-mips-bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch
 delete mode 100644 target/linux/generic/backport-5.10/050-v5.16-04-mips-bpf-Add-JIT-workarounds-for-CPU-errata.patch
 delete mode 100644 target/linux/generic/backport-5.10/050-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch
 delete mode 100644 target/linux/generic/backport-5.10/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch
 delete mode 100644 target/linux/generic/backport-5.10/071-crypto-arm-chacha-neon-optimize-for-non-block-size-m.patch
 delete mode 100644 target/linux/generic/backport-5.10/072-crypto-arm-chacha-neon-add-missing-counter-increment.patch
 delete mode 100644 target/linux/generic/backport-5.10/080-wireguard-peer-put-frequently-used-members-above-cac.patch
 delete mode 100644 target/linux/generic/backport-5.10/081-net-next-regmap-allow-to-define-reg_update_bits-for-no-bus.patch
 delete mode 100644 target/linux/generic/backport-5.10/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch
 delete mode 100644 target/linux/generic/backport-5.10/200-v5.18-tools-resolve_btfids-Build-with-host-flags.patch
 delete mode 100644 target/linux/generic/backport-5.10/311-v5.11-MIPS-zboot-put-appended-dtb-into-a-section.patch
 delete mode 100644 target/linux/generic/backport-5.10/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
 delete mode 100644 target/linux/generic/backport-5.10/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch
 delete mode 100644 target/linux/generic/backport-5.10/402-v5.12-0001-dt-bindings-mtd-move-partition-binding-to-its-own-fi.patch
 delete mode 100644 target/linux/generic/backport-5.10/402-v5.12-0002-dt-bindings-mtd-add-binding-for-BCM4908-partitions.patch
 delete mode 100644 target/linux/generic/backport-5.10/403-v5.13-mtd-parsers-ofpart-support-BCM4908-fixed-partitions.patch
 delete mode 100644 target/linux/generic/backport-5.10/404-v5.13-mtd-parsers-ofpart-limit-parsing-of-deprecated-DT-sy.patch
 delete mode 100644 target/linux/generic/backport-5.10/405-v5.13-mtd-parsers-ofpart-make-symbol-bcm4908_partitions_qu.patch
 delete mode 100644 target/linux/generic/backport-5.10/406-v5.13-0001-mtd-core-add-nvmem-cells-compatible-to-parse-mtd-as-.patch
 delete mode 100644 target/linux/generic/backport-5.10/406-v5.13-0002-dt-bindings-nvmem-drop-nodename-restriction.patch
 delete mode 100644 target/linux/generic/backport-5.10/406-v5.13-0003-dt-bindings-mtd-Document-use-of-nvmem-cells-compatib.patch
 delete mode 100644 target/linux/generic/backport-5.10/407-v5.13-0001-dt-bindings-mtd-add-binding-for-Linksys-Northstar-pa.patch
 delete mode 100644 target/linux/generic/backport-5.10/407-v5.13-0002-mtd-parsers-ofpart-support-Linksys-Northstar-partiti.patch
 delete mode 100644 target/linux/generic/backport-5.10/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch
 delete mode 100644 target/linux/generic/backport-5.10/409-v5.14-0001-dt-bindings-mtd-brcm-trx-Add-brcm-trx-magic.patch
 delete mode 100644 target/linux/generic/backport-5.10/409-v5.14-0002-mtd-parsers-trx-Allow-to-specify-brcm-trx-magic-in-D.patch
 delete mode 100644 target/linux/generic/backport-5.10/409-v5.14-0003-mtd-parsers-trx-Allow-to-use-TRX-parser-on-Mediatek-.patch
 delete mode 100644 target/linux/generic/backport-5.10/410-mtd-next-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch
 delete mode 100644 target/linux/generic/backport-5.10/411-v6.0-mtd-parsers-add-support-for-Sercomm-partitions.patch
 delete mode 100644 target/linux/generic/backport-5.10/412-v5.19-mtd-call-of_platform_populate-for-MTD-partitions.patch
 delete mode 100644 target/linux/generic/backport-5.10/413-v6.0-mtd-next-mtd-core-introduce-of-support-for-dynamic-partitions.patch
 delete mode 100644 target/linux/generic/backport-5.10/414-v6.1-mtd-allow-getting-MTD-device-associated-with-a-speci.patch
 delete mode 100644 target/linux/generic/backport-5.10/415-v6.0-mtd-core-check-partition-before-dereference.patch
 delete mode 100644 target/linux/generic/backport-5.10/416-v6.1-mtd-core-add-missing-of_node_get-in-dynamic-partitio.patch
 delete mode 100644 target/linux/generic/backport-5.10/417-v6.2-0001-mtd-core-simplify-a-bit-code-find-partition-matching.patch
 delete mode 100644 target/linux/generic/backport-5.10/417-v6.2-0002-mtd-core-try-to-find-OF-node-for-every-MTD-partition.patch
 delete mode 100644 target/linux/generic/backport-5.10/418-v6.2-mtd-core-set-ROOT_DEV-for-partitions-marked-as-rootf.patch
 delete mode 100644 target/linux/generic/backport-5.10/419-v5.14-mtd-spinand-gigadevice-Support-GD5F1GQ5UExxG.patch
 delete mode 100644 target/linux/generic/backport-5.10/420-v5.19-01-mtd-spinand-gigadevice-fix-Quad-IO-for-GD5F1GQ5UExxG.patch
 delete mode 100644 target/linux/generic/backport-5.10/420-v5.19-02-mtd-spinand-gigadevice-add-support-for-GD5FxGQ4xExxG.patch
 delete mode 100644 target/linux/generic/backport-5.10/420-v5.19-03-mtd-spinand-gigadevice-add-support-for-GD5F1GQ5RExxG.patch
 delete mode 100644 target/linux/generic/backport-5.10/420-v5.19-04-mtd-spinand-gigadevice-add-support-for-GD5F-2-4-GQ5x.patch
 delete mode 100644 target/linux/generic/backport-5.10/420-v5.19-05-mtd-spinand-gigadevice-add-support-for-GD5FxGM7xExxG.patch
 delete mode 100644 target/linux/generic/backport-5.10/421-v6.2-mtd-parsers-add-TP-Link-SafeLoader-partitions-table-.patch
 delete mode 100644 target/linux/generic/backport-5.10/422-v5.19-mtd-spi-nor-support-eon-en25qh256a.patch
 delete mode 100644 target/linux/generic/backport-5.10/500-v5.13-ubifs-default-to-zstd-compression.patch
 delete mode 100644 target/linux/generic/backport-5.10/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch
 delete mode 100644 target/linux/generic/backport-5.10/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch
 delete mode 100644 target/linux/generic/backport-5.10/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch
 delete mode 100644 target/linux/generic/backport-5.10/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch
 delete mode 100644 target/linux/generic/backport-5.10/605-v5.12-net-export-dev_set_threaded-symbol.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-00-netfilter-flowtable-add-hash-offset-field-to-tuple.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-01-netfilter-flowtable-separate-replace-destroy-and-sta.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-03-netfilter-conntrack-Remove-unused-variable-declarati.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-04-netfilter-flowtable-consolidate-skb_try_make_writabl.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-05-netfilter-flowtable-move-skb_try_make_writable-befor.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-06-netfilter-flowtable-move-FLOW_OFFLOAD_DIR_MAX-away-f.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-07-netfilter-flowtable-fast-NAT-functions-never-fail.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-08-netfilter-flowtable-call-dst_check-to-fall-back-to-c.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-09-netfilter-flowtable-refresh-timeout-after-dst-and-wr.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-10-netfilter-nftables-update-table-flags-from-the-commi.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-11-net-resolve-forwarding-path-from-virtual-netdevice-a.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-12-net-8021q-resolve-forwarding-path-for-vlan-devices.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-13-net-bridge-resolve-forwarding-path-for-bridge-device.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-14-net-bridge-resolve-forwarding-path-for-VLAN-tag-acti.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-15-net-ppp-resolve-forwarding-path-for-bridge-pppoe-dev.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-16-net-dsa-resolve-forwarding-path-for-dsa-slave-ports.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-17-netfilter-flowtable-add-xmit-path-types.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-18-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-19-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-20-netfilter-flowtable-add-vlan-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-21-netfilter-flowtable-add-bridge-vlan-filtering-suppor.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-22-netfilter-flowtable-add-pppoe-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-23-netfilter-flowtable-add-dsa-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-24-selftests-netfilter-flowtable-bridge-and-vlan-suppor.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-25-netfilter-flowtable-add-offload-support-for-xmit-pat.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-26-netfilter-nft_flow_offload-use-direct-xmit-if-hardwa.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-27-netfilter-flowtable-bridge-vlan-hardware-offload-and.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-28-net-flow_offload-add-FLOW_ACTION_PPPOE_PUSH.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-29-netfilter-flowtable-support-for-FLOW_ACTION_PPPOE_PU.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-30-dsa-slave-add-support-for-TC_SETUP_FT.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-31-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-33-net-ethernet-mtk_eth_soc-add-flow-offloading-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-34-docs-nf_flowtable-update-documentation-with-enhancem.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-35-net-ethernet-mediatek-ppe-fix-busy-wait-loop.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-36-net-ethernet-mediatek-fix-a-typo-bug-in-flow-offload.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-38-net-ethernet-mtk_eth_soc-unmap-RX-data-before-callin.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-39-net-ethernet-mtk_eth_soc-fix-build_skb-cleanup.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-40-net-ethernet-mtk_eth_soc-use-napi_consume_skb.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-41-net-ethernet-mtk_eth_soc-reduce-MDIO-bus-access-late.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-42-net-ethernet-mtk_eth_soc-remove-unnecessary-TX-queue.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-43-net-ethernet-mtk_eth_soc-use-larger-burst-size-for-Q.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-44-net-ethernet-mtk_eth_soc-increase-DMA-ring-sizes.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-45-net-ethernet-mtk_eth_soc-implement-dynamic-interrupt.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-46-net-ethernet-mtk_eth_soc-cache-HW-pointer-of-last-fr.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-47-net-ethernet-mtk_eth_soc-only-read-the-full-RX-descr.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-48-net-ethernet-mtk_eth_soc-reduce-unnecessary-interrup.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-49-net-ethernet-mtk_eth_soc-rework-NAPI-callbacks.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-50-net-ethernet-mtk_eth_soc-set-PPE-flow-hash-as-skb-ha.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-51-net-ethernet-mtk_eth_soc-use-iopoll.h-macro-for-DMA-.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-52-net-ethernet-mtk_eth_soc-missing-mutex.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-53-net-ethernet-mtk_eth_soc-handle-VLAN-pop-action.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-54-netfilter-flowtable-dst_check-from-garbage-collector.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-55-netfilter-conntrack-Introduce-tcp-offload-timeout-co.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-56-netfilter-conntrack-Introduce-udp-offload-timeout-co.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-57-netfilter-flowtable-Set-offload-timeouts-according-t.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.13-58-netfilter-flowtable-Add-FLOW_OFFLOAD_XMIT_UNSPEC-xmi.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.15-58-netfilter-flowtable-avoid-possible-false-sharing.patch
 delete mode 100644 target/linux/generic/backport-5.10/610-v5.18-netfilter-flowtable-move-dst_check-to-packet-path.patch
 delete mode 100644 target/linux/generic/backport-5.10/611-v5.12-net-ethernet-mediatek-support-setting-MTU.patch
 delete mode 100644 target/linux/generic/backport-5.10/612-v5.15-netfilter-conntrack-sanitize-table-size-default-sett.patch
 delete mode 100644 target/linux/generic/backport-5.10/613-v5.15-01-netfilter-flowtable-remove-nf_ct_l4proto_find-call.patch
 delete mode 100644 target/linux/generic/backport-5.10/613-v5.15-02-netfilter-conntrack-remove-offload_pickup-sysctl-aga.patch
 delete mode 100644 target/linux/generic/backport-5.10/614-v5.18-netfilter-flowtable-fix-TCP-flow-teardown.patch
 delete mode 100644 target/linux/generic/backport-5.10/615-v5.14-ip-Treat-IPv4-segment-s-lowest-address-as-unicast.patch
 delete mode 100644 target/linux/generic/backport-5.10/630-v5.15-page_pool_frag_support.patch
 delete mode 100644 target/linux/generic/backport-5.10/631-v6.3-net-page_pool-use-in_softirq-instead.patch
 delete mode 100644 target/linux/generic/backport-5.10/632-v6.3-net-add-helper-eth_addr_add.patch
 delete mode 100644 target/linux/generic/backport-5.10/633-v6.3-skbuff-Fix-a-race-between-coalescing-and-releasing-S.patch
 delete mode 100644 target/linux/generic/backport-5.10/705-net-phy-at803x-select-correct-page-on-config-init.patch
 delete mode 100644 target/linux/generic/backport-5.10/706-net-phy-at803x-fix-probe-error-if-copper-page-is-sel.patch
 delete mode 100644 target/linux/generic/backport-5.10/710-v5.12-net-phy-Add-100-base-x-mode.patch
 delete mode 100644 target/linux/generic/backport-5.10/711-v5.12-sfp-add-support-for-100-base-x-SFPs.patch
 delete mode 100644 target/linux/generic/backport-5.10/712-v5.13-net-phy-marvell-refactor-HWMON-OOP-style.patch
 delete mode 100644 target/linux/generic/backport-5.10/713-v5.15-net-phy-marvell-add-SFP-support-for-88E1510.patch
 delete mode 100644 target/linux/generic/backport-5.10/719-v5.12-net-dsa-automatically-bring-up-DSA-master-when-openi.patch
 delete mode 100644 target/linux/generic/backport-5.10/720-v5.12-net-bridge-notify-switchdev-of-disappearance-of-old-.patch
 delete mode 100644 target/linux/generic/backport-5.10/721-v5.12-net-dsa-be-louder-when-a-non-legacy-FDB-operation-fa.patch
 delete mode 100644 target/linux/generic/backport-5.10/722-v5.12-net-dsa-don-t-use-switchdev_notifier_fdb_info-in-dsa.patch
 delete mode 100644 target/linux/generic/backport-5.10/723-v5.12-net-dsa-move-switchdev-event-implementation-under-th.patch
 delete mode 100644 target/linux/generic/backport-5.10/724-v5.12-net-dsa-exit-early-in-dsa_slave_switchdev_event-if-w.patch
 delete mode 100644 target/linux/generic/backport-5.10/725-v5.12-net-dsa-listen-for-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch
 delete mode 100644 target/linux/generic/backport-5.10/729-v5.14-net-phy-at803x-mask-1000-Base-X-link-mode.patch
 delete mode 100644 target/linux/generic/backport-5.10/730-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch
 delete mode 100644 target/linux/generic/backport-5.10/731-v5.12-net-dsa-mt7530-MT7530-optional-GPIO-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/731-v5.13-net-dsa-mt7530-Add-support-for-EEE-features.patch
 delete mode 100644 target/linux/generic/backport-5.10/732-v5.13-0003-of-base-Fix-some-formatting-issues-and-provide-missi.patch
 delete mode 100644 target/linux/generic/backport-5.10/732-v5.13-0005-of-Fix-kerneldoc-output-formatting.patch
 delete mode 100644 target/linux/generic/backport-5.10/732-v5.13-0006-of-Add-missing-Return-section-in-kerneldoc-comments.patch
 delete mode 100644 target/linux/generic/backport-5.10/732-v5.13-0007-of-base-Fix-spelling-issue-with-function-param-prop.patch
 delete mode 100644 target/linux/generic/backport-5.10/732-v5.13-0008-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch
 delete mode 100644 target/linux/generic/backport-5.10/732-v5.13-0009-of-net-fix-of_get_mac_addr_nvmem-for-non-platform-de.patch
 delete mode 100644 target/linux/generic/backport-5.10/733-v5.15-0001-net-bgmac-bcma-handle-deferred-probe-error-due-to-ma.patch
 delete mode 100644 target/linux/generic/backport-5.10/733-v5.15-0002-net-bgmac-platform-handle-mac-address-deferral.patch
 delete mode 100644 target/linux/generic/backport-5.10/734-v5.16-0001-net-bgmac-improve-handling-PHY.patch
 delete mode 100644 target/linux/generic/backport-5.10/734-v5.16-0002-net-bgmac-support-MDIO-described-in-DT.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-01-net-dsa-qca8k-change-simple-print-to-dev-variant.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-02-net-dsa-qca8k-use-iopoll-macro-for-qca8k_busy_wait.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-03-net-dsa-qca8k-improve-qca8k-read-write-rmw-bus-acces.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-04-net-dsa-qca8k-handle-qca8k_set_page-errors.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-05-net-dsa-qca8k-handle-error-with-qca8k_read-operation.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-06-net-dsa-qca8k-handle-error-with-qca8k_write-operatio.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-07-net-dsa-qca8k-handle-error-with-qca8k_rmw-operation.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-08-net-dsa-qca8k-handle-error-from-qca8k_busy_wait.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-09-net-dsa-qca8k-add-support-for-qca8327-switch.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-10-devicetree-net-dsa-qca8k-Document-new-compatible-qca.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-11-net-dsa-qca8k-add-priority-tweak-to-qca8337-switch.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-12-net-dsa-qca8k-limit-port5-delay-to-qca8337.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-13-net-dsa-qca8k-add-GLOBAL_FC-settings-needed-for-qca8.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-14-net-dsa-qca8k-add-support-for-switch-rev.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-15-net-dsa-qca8k-add-ethernet-ports-fallback-to-setup_m.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-16-net-dsa-qca8k-make-rgmii-delay-configurable.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-17-net-dsa-qca8k-clear-MASTER_EN-after-phy-read-write.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-18-net-dsa-qca8k-dsa-qca8k-protect-MASTER-busy_wait-wit.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-19-net-dsa-qca8k-enlarge-mdio-delay-and-timeout.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-20-net-dsa-qca8k-add-support-for-internal-phy-and-inter.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-21-devicetree-bindings-dsa-qca8k-Document-internal-mdio.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-22-net-dsa-qca8k-improve-internal-mdio-read-write-bus-a.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-23-net-dsa-qca8k-pass-switch_revision-info-to-phy-dev_f.patch
 delete mode 100644 target/linux/generic/backport-5.10/735-v5.14-25-net-phy-add-support-for-qca8k-switch-internal-PHY-in.patch
 delete mode 100644 target/linux/generic/backport-5.10/736-v5.14-net-dsa-qca8k-fix-missing-unlock-on-error-in-qca8k-vlan.patch
 delete mode 100644 target/linux/generic/backport-5.10/737-v5.14-01-net-dsa-qca8k-check-return-value-of-read-functions-c.patch
 delete mode 100644 target/linux/generic/backport-5.10/737-v5.14-02-net-dsa-qca8k-add-missing-check-return-value-in-qca8.patch
 delete mode 100644 target/linux/generic/backport-5.10/738-v5.14-01-net-dsa-qca8k-fix-an-endian-bug-in-qca8k-get-ethtool.patch
 delete mode 100644 target/linux/generic/backport-5.10/738-v5.14-02-net-dsa-qca8k-check-the-correct-variable-in-qca8k-se.patch
 delete mode 100644 target/linux/generic/backport-5.10/739-v5.15-net-dsa-qca8k-fix-kernel-panic-with-legacy-mdio-mapping.patch
 delete mode 100644 target/linux/generic/backport-5.10/740-v5.13-0001-net-dsa-b53-Add-debug-prints-in-b53_vlan_enable.patch
 delete mode 100644 target/linux/generic/backport-5.10/740-v5.13-0002-net-dsa-b53-spi-allow-device-tree-probing.patch
 delete mode 100644 target/linux/generic/backport-5.10/740-v5.13-0003-net-dsa-b53-relax-is63xx-condition.patch
 delete mode 100644 target/linux/generic/backport-5.10/740-v5.13-0004-net-dsa-tag_brcm-add-support-for-legacy-tags.patch
 delete mode 100644 target/linux/generic/backport-5.10/740-v5.13-0005-net-dsa-b53-support-legacy-tags.patch
 delete mode 100644 target/linux/generic/backport-5.10/740-v5.13-0006-net-dsa-b53-mmap-Add-device-tree-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/740-v5.13-0007-net-dsa-b53-spi-add-missing-MODULE_DEVICE_TABLE.patch
 delete mode 100644 target/linux/generic/backport-5.10/741-v5.14-0001-net-dsa-b53-Do-not-force-CPU-to-be-always-tagged.patch
 delete mode 100644 target/linux/generic/backport-5.10/741-v5.14-0002-net-dsa-b53-remove-redundant-null-check-on-dev.patch
 delete mode 100644 target/linux/generic/backport-5.10/741-v5.14-0003-net-dsa-b53-Create-default-VLAN-entry-explicitly.patch
 delete mode 100644 target/linux/generic/backport-5.10/742-v5.16-net-phy-at803x-add-support-for-qca-8327-internal-phy.patch
 delete mode 100644 target/linux/generic/backport-5.10/743-v5.16-0001-net-dsa-b53-Include-all-ports-in-enabled_ports.patch
 delete mode 100644 target/linux/generic/backport-5.10/743-v5.16-0002-net-dsa-b53-Drop-BCM5301x-workaround-for-a-wrong-CPU.patch
 delete mode 100644 target/linux/generic/backport-5.10/743-v5.16-0003-net-dsa-b53-Improve-flow-control-setup-on-BCM5301x.patch
 delete mode 100644 target/linux/generic/backport-5.10/743-v5.16-0004-net-dsa-b53-Drop-unused-cpu_port-field.patch
 delete mode 100644 target/linux/generic/backport-5.10/744-v5.15-net-dsa-don-t-set-skb-offload_fwd_mark-when-not-offl.patch
 delete mode 100644 target/linux/generic/backport-5.10/745-v5.16-01-net-phy-at803x-add-support-for-qca-8327-A-variant.patch
 delete mode 100644 target/linux/generic/backport-5.10/745-v5.16-02-net-phy-at803x-add-resume-suspend-function-to-qca83x.patch
 delete mode 100644 target/linux/generic/backport-5.10/745-v5.16-03-net-phy-at803x-fix-spacing-and-improve-name-for-83xx.patch
 delete mode 100644 target/linux/generic/backport-5.10/746-v5.16-01-net-phy-at803x-fix-resume-for-QCA8327-phy.patch
 delete mode 100644 target/linux/generic/backport-5.10/746-v5.16-02-net-phy-at803x-add-DAC-amplitude-fix-for-8327-phy.patch
 delete mode 100644 target/linux/generic/backport-5.10/746-v5.16-03-net-phy-at803x-enable-prefer-master-for-83xx-interna.patch
 delete mode 100644 target/linux/generic/backport-5.10/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-01-dsa-qca8k-add-mac-power-sel-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-02-dt-bindings-net-dsa-qca8k-Add-SGMII-clock-phase-prop.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-04-dt-bindings-net-dsa-qca8k-Document-support-for-CPU-p.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-06-net-dsa-qca8k-rework-rgmii-delay-logic-and-scan-for-.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-07-dt-bindings-net-dsa-qca8k-Document-qca-sgmii-enable-.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-08-net-dsa-qca8k-add-explicit-SGMII-PLL-enable.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-09-dt-bindings-net-dsa-qca8k-Document-qca-led-open-drai.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-10-net-dsa-qca8k-add-support-for-pws-config-reg.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-11-dt-bindings-net-dsa-qca8k-document-support-for-qca83.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-12-net-dsa-qca8k-add-support-for-QCA8328.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-14-net-dsa-qca8k-move-port-config-to-dedicated-struct.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-15-dt-bindings-net-ipq8064-mdio-fix-warning-with-new-qc.patch
 delete mode 100644 target/linux/generic/backport-5.10/747-v5.16-16-dt-bindings-net-dsa-qca8k-convert-to-YAML-schema.patch
 delete mode 100644 target/linux/generic/backport-5.10/748-v5.16-net-dsa-qca8k-fix-delay-applied-to-wrong-cpu-in-parse-p.patch
 delete mode 100644 target/linux/generic/backport-5.10/749-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch
 delete mode 100644 target/linux/generic/backport-5.10/750-v5.16-net-dsa-qca8k-make-sure-pad0-mac06-exchange-is-disabled.patch
 delete mode 100644 target/linux/generic/backport-5.10/751-v5.16-net-dsa-qca8k-fix-internal-delay-applied-to-the-wrong-PAD.patch
 delete mode 100644 target/linux/generic/backport-5.10/752-v5.16-net-dsa-qca8k-fix-MTU-calculation.patch
 delete mode 100644 target/linux/generic/backport-5.10/753-net-next-net-dsa-qca8k-remove-redundant-check-in-parse_port_config.patch
 delete mode 100644 target/linux/generic/backport-5.10/754-net-next-net-dsa-qca8k-convert-to-GENMASK_FIELD_PREP_FIELD_GET.patch
 delete mode 100644 target/linux/generic/backport-5.10/755-net-next-net-dsa-qca8k-remove-extra-mutex_init-in-qca8k_setup.patch
 delete mode 100644 target/linux/generic/backport-5.10/756-net-next-net-dsa-qca8k-move-regmap-init-in-probe-and-set-it.patch
 delete mode 100644 target/linux/generic/backport-5.10/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch
 delete mode 100644 target/linux/generic/backport-5.10/758-net-next-net-dsa-qca8k-add-additional-MIB-counter-and-.patch
 delete mode 100644 target/linux/generic/backport-5.10/759-net-next-net-dsa-qca8k-add-support-for-port-fast-aging.patch
 delete mode 100644 target/linux/generic/backport-5.10/760-net-next-net-dsa-qca8k-add-set_ageing_time-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/761-net-next-net-dsa-qca8k-add-support-for-mdb_add-del.patch
 delete mode 100644 target/linux/generic/backport-5.10/762-v5.11-net-dsa-mt7530-support-setting-MTU.patch
 delete mode 100644 target/linux/generic/backport-5.10/763-v5.11-net-dsa-mt7530-enable-MTU-normalization.patch
 delete mode 100644 target/linux/generic/backport-5.10/764-v5.11-net-dsa-mt7530-support-setting-ageing-time.patch
 delete mode 100644 target/linux/generic/backport-5.10/770-v5.15-net-dsa-mt7530-support-MDB-operations.patch
 delete mode 100644 target/linux/generic/backport-5.10/771-v5.14-net-phy-add-MediaTek-Gigabit-Ethernet-PHY-driver.patch
 delete mode 100644 target/linux/generic/backport-5.10/772-v5.14-net-dsa-mt7530-add-interrupt-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/773-v5.18-1-net-dsa-Move-VLAN-filtering-syncing-out-of-dsa_switc.patch
 delete mode 100644 target/linux/generic/backport-5.10/773-v5.18-2-net-dsa-Avoid-cross-chip-syncing-of-VLAN-filtering.patch
 delete mode 100644 target/linux/generic/backport-5.10/774-v5.15-net-dsa-mv88e6xxx-keep-the-pvid-at-0-when-VLAN-unawa.patch
 delete mode 100644 target/linux/generic/backport-5.10/775-v5.18-01-net-phy-at803x-move-page-selection-fix-to-config_init.patch
 delete mode 100644 target/linux/generic/backport-5.10/775-v5.18-02-net-phy-at803x-add-fiber-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/775-v5.18-03-net-phy-at803x-support-downstream-SFP-cage.patch
 delete mode 100644 target/linux/generic/backport-5.10/775-v5.18-04-net-phy-at803x-fix-NULL-pointer-dereference-on-AR9331-PHY.patch
 delete mode 100644 target/linux/generic/backport-5.10/775-v5.18-05-net-phy-at803x-fix-error-return-code-in-at803x_probe.patch
 delete mode 100644 target/linux/generic/backport-5.10/780-v5.11-net-usb-r8152-Provide-missing-documentation-for-some.patch
 delete mode 100644 target/linux/generic/backport-5.10/781-v5.11-net-usb-r8152-Fix-a-couple-of-spelling-errors-in-fw_.patch
 delete mode 100644 target/linux/generic/backport-5.10/782-v5.11-net-usb-r8153_ecm-support-ECM-mode-for-RTL8153.patch
 delete mode 100644 target/linux/generic/backport-5.10/783-v5.12-net-usb-r8152-use-new-tasklet-API.patch
 delete mode 100644 target/linux/generic/backport-5.10/784-v5.12-r8152-replace-several-functions-about-phy-patch-requ.patch
 delete mode 100644 target/linux/generic/backport-5.10/785-v5.12-r8152-adjust-the-flow-of-power-cut-for-RTL8153B.patch
 delete mode 100644 target/linux/generic/backport-5.10/786-v5.12-r8152-enable-U1-U2-for-USB_SPEED_SUPER.patch
 delete mode 100644 target/linux/generic/backport-5.10/787-v5.12-r8152-check-if-the-pointer-of-the-function-exists.patch
 delete mode 100644 target/linux/generic/backport-5.10/788-v5.12-r8152-replace-netif_err-with-dev_err.patch
 delete mode 100644 target/linux/generic/backport-5.10/789-v5.12-r8152-spilt-rtl_set_eee_plus-and-r8153b_green_en.patch
 delete mode 100644 target/linux/generic/backport-5.10/790-v5.13-r8152-set-inter-fram-gap-time-depending-on-speed.patch
 delete mode 100644 target/linux/generic/backport-5.10/791-v5.13-r8152-adjust-rtl8152_check_firmware-function.patch
 delete mode 100644 target/linux/generic/backport-5.10/792-v5.13-r8152-add-help-function-to-change-mtu.patch
 delete mode 100644 target/linux/generic/backport-5.10/793-v5.13-r8152-support-new-chips.patch
 delete mode 100644 target/linux/generic/backport-5.10/794-v5.13-r8152-support-PHY-firmware-for-RTL8156-series.patch
 delete mode 100644 target/linux/generic/backport-5.10/795-v5.13-r8152-search-the-configuration-of-vendor-mode.patch
 delete mode 100644 target/linux/generic/backport-5.10/796-v5.14-net-phy-realtek-add-dt-property-to-disable-CLKOUT-cl.patch
 delete mode 100644 target/linux/generic/backport-5.10/797-v5.17-net-usb-ax88179_178a-add-TSO-feature.patch
 delete mode 100644 target/linux/generic/backport-5.10/800-v5.13-0001-firmware-bcm47xx_nvram-rename-finding-function-and-i.patch
 delete mode 100644 target/linux/generic/backport-5.10/800-v5.13-0002-firmware-bcm47xx_nvram-add-helper-checking-for-NVRAM.patch
 delete mode 100644 target/linux/generic/backport-5.10/800-v5.13-0003-firmware-bcm47xx_nvram-extract-code-copying-NVRAM.patch
 delete mode 100644 target/linux/generic/backport-5.10/800-v5.13-0004-firmware-bcm47xx_nvram-look-for-NVRAM-with-for-inste.patch
 delete mode 100644 target/linux/generic/backport-5.10/800-v5.13-0005-firmware-bcm47xx_nvram-inline-code-checking-NVRAM-si.patch
 delete mode 100644 target/linux/generic/backport-5.10/801-v5.11-0001-nvmem-core-Add-support-for-keepout-regions.patch
 delete mode 100644 target/linux/generic/backport-5.10/801-v5.11-0002-nvmem-qfprom-Don-t-touch-certain-fuses.patch
 delete mode 100644 target/linux/generic/backport-5.10/801-v5.11-0003-nvmem-imx-ocotp-add-support-for-the-unaliged-word-co.patch
 delete mode 100644 target/linux/generic/backport-5.10/802-v5.12-0002-nvmem-imx-iim-Use-of_device_get_match_data.patch
 delete mode 100644 target/linux/generic/backport-5.10/802-v5.12-0003-nvmem-Add-driver-to-expose-reserved-memory-as-nvmem.patch
 delete mode 100644 target/linux/generic/backport-5.10/802-v5.12-0005-nvmem-Kconfig-Correct-typo-in-NVMEM_RMEM.patch
 delete mode 100644 target/linux/generic/backport-5.10/803-v5.13-0001-nvmem-convert-comma-to-semicolon.patch
 delete mode 100644 target/linux/generic/backport-5.10/803-v5.13-0003-nvmem-brcm_nvram-new-driver-exposing-Broadcom-s-NVRA.patch
 delete mode 100644 target/linux/generic/backport-5.10/803-v5.13-0004-nvmem-core-Add-functions-to-make-number-reading-easy.patch
 delete mode 100644 target/linux/generic/backport-5.10/803-v5.13-0005-nvmem-core-Fix-unintentional-sign-extension-issue.patch
 delete mode 100644 target/linux/generic/backport-5.10/803-v5.13-0006-nvmem-rmem-fix-undefined-reference-to-memremap.patch
 delete mode 100644 target/linux/generic/backport-5.10/803-v5.13-0007-nvmem-qfprom-Add-support-for-fuse-blowing-on-sc7280.patch
 delete mode 100644 target/linux/generic/backport-5.10/804-v5.14-0001-nvmem-core-allow-specifying-of_node.patch
 delete mode 100644 target/linux/generic/backport-5.10/804-v5.14-0002-nvmem-sprd-Fix-an-error-message.patch
 delete mode 100644 target/linux/generic/backport-5.10/804-v5.14-0003-nvmem-sunxi_sid-Set-type-to-OTP.patch
 delete mode 100644 target/linux/generic/backport-5.10/804-v5.14-0004-nvmem-qfprom-minor-nit-fixes.patch
 delete mode 100644 target/linux/generic/backport-5.10/804-v5.14-0005-nvmem-core-constify-nvmem_cell_read_variable_common-.patch
 delete mode 100644 target/linux/generic/backport-5.10/804-v5.14-0006-nvmem-qfprom-Improve-the-comment-about-regulator-set.patch
 delete mode 100644 target/linux/generic/backport-5.10/804-v5.14-0007-nvmem-add-NVMEM_TYPE_FRAM.patch
 delete mode 100644 target/linux/generic/backport-5.10/805-v5.15-0002-nvmem-qfprom-sc7280-Handle-the-additional-power-doma.patch
 delete mode 100644 target/linux/generic/backport-5.10/805-v5.15-0003-nvmem-core-fix-error-handling-while-validating-keepo.patch
 delete mode 100644 target/linux/generic/backport-5.10/805-v5.15-0004-nvmem-nintendo-otp-Add-new-driver-for-the-Wii-and-Wi.patch
 delete mode 100644 target/linux/generic/backport-5.10/805-v5.15-0005-nvmem-NVMEM_NINTENDO_OTP-should-depend-on-WII.patch
 delete mode 100644 target/linux/generic/backport-5.10/806-v5.16-0001-nvmem-core-rework-nvmem-cell-instance-creation.patch
 delete mode 100644 target/linux/generic/backport-5.10/806-v5.16-0002-nvmem-core-add-nvmem-cell-post-processing-callback.patch
 delete mode 100644 target/linux/generic/backport-5.10/806-v5.16-0003-nvmem-imx-ocotp-add-support-for-post-processing.patch
 delete mode 100644 target/linux/generic/backport-5.10/807-v5.17-0002-nvmem-mtk-efuse-support-minimum-one-byte-access-stri.patch
 delete mode 100644 target/linux/generic/backport-5.10/808-v5.18-0001-nvmem-core-Remove-unused-devm_nvmem_unregister.patch
 delete mode 100644 target/linux/generic/backport-5.10/808-v5.18-0002-nvmem-core-Use-devm_add_action_or_reset.patch
 delete mode 100644 target/linux/generic/backport-5.10/808-v5.18-0003-nvmem-core-Check-input-parameter-for-NULL-in-nvmem_u.patch
 delete mode 100644 target/linux/generic/backport-5.10/808-v5.18-0004-nvmem-qfprom-fix-kerneldoc-warning.patch
 delete mode 100644 target/linux/generic/backport-5.10/808-v5.18-0005-nvmem-sunxi_sid-Add-support-for-D1-variant.patch
 delete mode 100644 target/linux/generic/backport-5.10/808-v5.18-0006-nvmem-meson-mx-efuse-replace-unnecessary-devm_kstrdu.patch
 delete mode 100644 target/linux/generic/backport-5.10/808-v5.18-0007-nvmem-add-driver-for-Layerscape-SFP-Security-Fuse-Pr.patch
 delete mode 100644 target/linux/generic/backport-5.10/808-v5.18-0008-nvmem-qfprom-Increase-fuse-blow-timeout-to-prevent-w.patch
 delete mode 100644 target/linux/generic/backport-5.10/808-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch
 delete mode 100644 target/linux/generic/backport-5.10/808-v5.18-0010-nvmem-brcm_nvram-parse-NVRAM-content-into-NVMEM-cell.patch
 delete mode 100644 target/linux/generic/backport-5.10/809-v5.19-0001-nvmem-bcm-ocotp-mark-ACPI-device-ID-table-as-maybe-u.patch
 delete mode 100644 target/linux/generic/backport-5.10/809-v5.19-0002-nvmem-sunplus-ocotp-staticize-sp_otp_v0.patch
 delete mode 100644 target/linux/generic/backport-5.10/809-v5.19-0003-nvmem-sunplus-ocotp-drop-useless-probe-confirmation.patch
 delete mode 100644 target/linux/generic/backport-5.10/809-v5.19-0004-nvmem-core-support-passing-DT-node-in-cell-info.patch
 delete mode 100644 target/linux/generic/backport-5.10/809-v5.19-0005-nvmem-brcm_nvram-find-Device-Tree-nodes-for-NVMEM-ce.patch
 delete mode 100644 target/linux/generic/backport-5.10/809-v5.19-0006-nvmem-Add-Apple-eFuse-driver.patch
 delete mode 100644 target/linux/generic/backport-5.10/809-v5.19-0007-nvmem-qfprom-using-pm_runtime_resume_and_get-instead.patch
 delete mode 100644 target/linux/generic/backport-5.10/809-v5.19-0008-nvmem-sfp-Use-regmap.patch
 delete mode 100644 target/linux/generic/backport-5.10/809-v5.19-0009-nvmem-sfp-Add-support-for-TA-2.1-devices.patch
 delete mode 100644 target/linux/generic/backport-5.10/810-v6.0-0001-nvmem-microchip-otpc-add-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/810-v6.0-0002-nvmem-mtk-efuse-Simplify-with-devm_platform_get_and_.patch
 delete mode 100644 target/linux/generic/backport-5.10/811-v6.1-0001-nvmem-core-Fix-memleak-in-nvmem_register.patch
 delete mode 100644 target/linux/generic/backport-5.10/811-v6.1-0002-nvmem-add-driver-handling-U-Boot-environment-variabl.patch
 delete mode 100644 target/linux/generic/backport-5.10/811-v6.1-0004-nvmem-brcm_nvram-Use-kzalloc-for-allocating-only-one.patch
 delete mode 100644 target/linux/generic/backport-5.10/811-v6.1-0005-nvmem-prefix-all-symbols-with-NVMEM_.patch
 delete mode 100644 target/linux/generic/backport-5.10/811-v6.1-0006-nvmem-sort-config-symbols-alphabetically.patch
 delete mode 100644 target/linux/generic/backport-5.10/811-v6.1-0007-nvmem-u-boot-env-find-Device-Tree-nodes-for-NVMEM-ce.patch
 delete mode 100644 target/linux/generic/backport-5.10/811-v6.1-0008-nvmem-lan9662-otp-add-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/811-v6.1-0009-nvmem-u-boot-env-fix-crc32-casting-type.patch
 delete mode 100644 target/linux/generic/backport-5.10/811-v6.1-0010-nvmem-lan9662-otp-Fix-compatible-string.patch
 delete mode 100644 target/linux/generic/backport-5.10/811-v6.1-0011-nvmem-u-boot-env-fix-crc32_data_offset-on-redundant-.patch
 delete mode 100644 target/linux/generic/backport-5.10/811-v6.1-0012-nvmem-rmem-Fix-return-value-check-in-rmem_read.patch
 delete mode 100644 target/linux/generic/backport-5.10/811-v6.1-0013-nvmem-lan9662-otp-Change-return-type-of-lan9662_otp_.patch
 delete mode 100644 target/linux/generic/backport-5.10/812-v6.2-0001-nvmem-stm32-move-STM32MP15_BSEC_NUM_LOWER-in-config.patch
 delete mode 100644 target/linux/generic/backport-5.10/812-v6.2-0002-nvmem-stm32-add-warning-when-upper-OTPs-are-updated.patch
 delete mode 100644 target/linux/generic/backport-5.10/812-v6.2-0003-nvmem-stm32-add-nvmem-type-attribute.patch
 delete mode 100644 target/linux/generic/backport-5.10/812-v6.2-0004-nvmem-stm32-fix-spelling-typo-in-comment.patch
 delete mode 100644 target/linux/generic/backport-5.10/812-v6.2-0005-nvmem-Kconfig-Fix-spelling-mistake-controlls-control.patch
 delete mode 100644 target/linux/generic/backport-5.10/812-v6.2-0006-nvmem-u-boot-env-add-Broadcom-format-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/812-v6.2-0007-nvmem-brcm_nvram-Add-check-for-kzalloc.patch
 delete mode 100644 target/linux/generic/backport-5.10/812-v6.2-0008-nvmem-sunxi_sid-Always-use-32-bit-MMIO-reads.patch
 delete mode 100644 target/linux/generic/backport-5.10/812-v6.2-0013-nvmem-core-fix-device-node-refcounting.patch
 delete mode 100644 target/linux/generic/backport-5.10/813-v6.3-0001-nvmem-core-remove-spurious-white-space.patch
 delete mode 100644 target/linux/generic/backport-5.10/813-v6.3-0002-nvmem-core-add-an-index-parameter-to-the-cell.patch
 delete mode 100644 target/linux/generic/backport-5.10/813-v6.3-0003-nvmem-core-move-struct-nvmem_cell_info-to-nvmem-prov.patch
 delete mode 100644 target/linux/generic/backport-5.10/813-v6.3-0004-nvmem-core-drop-the-removal-of-the-cells-in-nvmem_ad.patch
 delete mode 100644 target/linux/generic/backport-5.10/813-v6.3-0005-nvmem-core-add-nvmem_add_one_cell.patch
 delete mode 100644 target/linux/generic/backport-5.10/813-v6.3-0006-nvmem-core-use-nvmem_add_one_cell-in-nvmem_add_cells.patch
 delete mode 100644 target/linux/generic/backport-5.10/813-v6.3-0007-nvmem-stm32-add-OP-TEE-support-for-STM32MP13x.patch
 delete mode 100644 target/linux/generic/backport-5.10/813-v6.3-0008-nvmem-stm32-detect-bsec-pta-presence-for-STM32MP15x.patch
 delete mode 100644 target/linux/generic/backport-5.10/813-v6.3-0009-nvmem-rave-sp-eeprm-fix-kernel-doc-bad-line-warning.patch
 delete mode 100644 target/linux/generic/backport-5.10/813-v6.3-0010-nvmem-qcom-spmi-sdam-register-at-device-init-time.patch
 delete mode 100644 target/linux/generic/backport-5.10/813-v6.3-0011-nvmem-stm32-fix-OPTEE-dependency.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0001-nvmem-xilinx-zynqmp-make-modular.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0002-nvmem-core-introduce-NVMEM-layouts.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0003-nvmem-core-handle-the-absence-of-expected-layouts.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0004-nvmem-core-request-layout-modules-loading.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0005-nvmem-core-add-per-cell-post-processing.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0006-nvmem-core-allow-to-modify-a-cell-before-adding-it.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0007-nvmem-imx-ocotp-replace-global-post-processing-with-.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0008-nvmem-cell-drop-global-cell_post_process.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0009-nvmem-core-provide-own-priv-pointer-in-post-process-.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0010-nvmem-layouts-sl28vpd-Add-new-layout-driver.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0011-nvmem-layouts-onie-tlv-Add-new-layout-driver.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0012-nvmem-stm32-romem-mark-OF-related-data-as-maybe-unus.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0013-nvmem-mtk-efuse-Support-postprocessing-for-GPU-speed.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0014-nvmem-bcm-ocotp-Use-devm_platform_ioremap_resource.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0015-nvmem-nintendo-otp-Use-devm_platform_ioremap_resourc.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0016-nvmem-vf610-ocotp-Use-devm_platform_get_and_ioremap_.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0017-nvmem-core-support-specifying-both-cell-raw-data-pos.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0018-nvmem-u-boot-env-post-process-ethaddr-env-variable.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0019-nvmem-Add-macro-to-register-nvmem-layout-drivers.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0020-nvmem-layouts-sl28vpd-Use-module_nvmem_layout_driver.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0021-nvmem-layouts-onie-tlv-Use-module_nvmem_layout_drive.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0022-nvmem-layouts-onie-tlv-Drop-wrong-module-alias.patch
 delete mode 100644 target/linux/generic/backport-5.10/814-v6.4-0023-nvmem-layouts-sl28vpd-set-varaiable-sl28vpd_layout-s.patch
 delete mode 100644 target/linux/generic/backport-5.10/818-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch
 delete mode 100644 target/linux/generic/backport-5.10/819-v5.13-usb-host-ehci-platform-add-spurious_oc-DT-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/820-v5.13-make-pci_host_common_probe-declare-its-reliance-on-msi-domains.patch
 delete mode 100644 target/linux/generic/backport-5.10/821-v5.13-let-pci-host-bridges-declar-their-reliance-on-msi-domains.patch
 delete mode 100644 target/linux/generic/backport-5.10/822-v5.13-advertise-lack-of-built-in-msi-handling.patch
 delete mode 100644 target/linux/generic/backport-5.10/825-v5.15-of-unify-of_count_phandle_with_args-arguments-with-C.patch
 delete mode 100644 target/linux/generic/backport-5.10/826-v5.17-of-base-make-small-of_parse_phandle-variants-static-.patch
 delete mode 100644 target/linux/generic/backport-5.10/827-v6.3-0001-of-base-add-of_parse_phandle_with_optional_args.patch
 delete mode 100644 target/linux/generic/backport-5.10/827-v6.3-0002-of-property-make-.-cells-optional-for-simple-props.patch
 delete mode 100644 target/linux/generic/backport-5.10/827-v6.3-0003-of-property-add-nvmem-cell-cells-property.patch
 delete mode 100644 target/linux/generic/backport-5.10/827-v6.3-0004-of-device-Ignore-modalias-of-reused-nodes.patch
 delete mode 100644 target/linux/generic/backport-5.10/827-v6.3-0005-of-device-Do-not-ignore-error-code-in-of_device_ueve.patch
 delete mode 100644 target/linux/generic/backport-5.10/828-v6.4-0001-of-Fix-modalias-string-generation.patch
 delete mode 100644 target/linux/generic/backport-5.10/828-v6.4-0002-of-Update-of_device_get_modalias.patch
 delete mode 100644 target/linux/generic/backport-5.10/828-v6.4-0003-of-Rename-of_modalias_node.patch
 delete mode 100644 target/linux/generic/backport-5.10/828-v6.4-0004-of-Move-of_modalias-to-module.c.patch
 delete mode 100644 target/linux/generic/backport-5.10/828-v6.4-0005-of-Move-the-request-module-helper-logic-to-module.c.patch
 delete mode 100644 target/linux/generic/backport-5.10/830-v5.14-leds-lp55xx-Initialize-enable-GPIO-direction-to-outp.patch
 delete mode 100644 target/linux/generic/backport-5.10/840-v5.15-leds-pca955x-clean-up-code-formatting.patch
 delete mode 100644 target/linux/generic/backport-5.10/841-v5.15-leds-pca955x-add-brightness-get-function.patch
 delete mode 100644 target/linux/generic/backport-5.10/842-v5.15-leds-pca955x-implement-the-default-state-property.patch
 delete mode 100644 target/linux/generic/backport-5.10/843-v5.15-leds-pca955x-let-the-core-process-the-fwnode.patch
 delete mode 100644 target/linux/generic/backport-5.10/844-v5.15-leds-pca955x-switch-to-i2c-probe-new.patch
 delete mode 100644 target/linux/generic/backport-5.10/845-v6.0-0001-dt-bindings-leds-add-Broadcom-s-BCM63138-controller.patch
 delete mode 100644 target/linux/generic/backport-5.10/845-v6.0-0002-leds-bcm63138-add-support-for-BCM63138-controller.patch
 delete mode 100644 target/linux/generic/backport-5.10/846-v6.0-0001-dt-bindings-leds-leds-bcm63138-unify-full-stops-in-d.patch
 delete mode 100644 target/linux/generic/backport-5.10/846-v6.0-0002-leds-add-help-info-about-BCM63138-module-name.patch
 delete mode 100644 target/linux/generic/backport-5.10/846-v6.0-0003-leds-leds-bcm63138-get-rid-of-LED_OFF.patch
 delete mode 100644 target/linux/generic/backport-5.10/850-v5.17-0001-PCI-pci-bridge-emul-Add-description-for-class_revisi.patch
 delete mode 100644 target/linux/generic/backport-5.10/850-v5.17-0002-PCI-pci-bridge-emul-Add-definitions-for-missing-capa.patch
 delete mode 100644 target/linux/generic/backport-5.10/850-v5.17-0003-PCI-aardvark-Add-support-for-DEVCAP2-DEVCTL2-LNKCAP2.patch
 delete mode 100644 target/linux/generic/backport-5.10/850-v5.17-0005-PCI-aardvark-Comment-actions-in-driver-remove-method.patch
 delete mode 100644 target/linux/generic/backport-5.10/850-v5.17-0006-PCI-aardvark-Disable-bus-mastering-when-unbinding-dr.patch
 delete mode 100644 target/linux/generic/backport-5.10/850-v5.17-0007-PCI-aardvark-Mask-all-interrupts-when-unbinding-driv.patch
 delete mode 100644 target/linux/generic/backport-5.10/850-v5.17-0008-PCI-aardvark-Fix-memory-leak-in-driver-unbind.patch
 delete mode 100644 target/linux/generic/backport-5.10/850-v5.17-0009-PCI-aardvark-Assert-PERST-when-unbinding-driver.patch
 delete mode 100644 target/linux/generic/backport-5.10/850-v5.17-0010-PCI-aardvark-Disable-link-training-when-unbinding-dr.patch
 delete mode 100644 target/linux/generic/backport-5.10/850-v5.17-0011-PCI-aardvark-Disable-common-PHY-when-unbinding-drive.patch
 delete mode 100644 target/linux/generic/backport-5.10/851-v5.15-0001-phy-marvell-phy-mvebu-a3700-comphy-Rename-HS-SGMMI-t.patch
 delete mode 100644 target/linux/generic/backport-5.10/851-v5.15-0002-phy-marvell-phy-mvebu-a3700-comphy-Remove-unsupporte.patch
 delete mode 100644 target/linux/generic/backport-5.10/860-v5.17-MIPS-ath79-drop-_machine_restart-again.patch
 delete mode 100644 target/linux/generic/backport-5.10/870-hwmon-next-hwmon-lm70-Add-ti-tmp125-support.patch
 delete mode 100644 target/linux/generic/backport-5.10/871-v5.12-hwmon-add-Texas-Instruments-TPS23861-driver.patch
 delete mode 100644 target/linux/generic/backport-5.10/872-v5.13-01-hwmon-tps23861-define-regmap-max-register.patch
 delete mode 100644 target/linux/generic/backport-5.10/872-v5.13-02-hwmon-tps23861-set-current-shunt-value.patch
 delete mode 100644 target/linux/generic/backport-5.10/872-v5.13-03-hwmon-tps23861-correct-shunt-LSB-values.patch
 delete mode 100644 target/linux/generic/backport-5.10/873-v6.0-hwmon-tps23861-fix-byte-order-in-current-and-voltage.patch
 delete mode 100644 target/linux/generic/backport-5.10/880-v5.19-cdc_ether-export-usbnet_cdc_zte_rx_fixup.patch
 delete mode 100644 target/linux/generic/backport-5.10/881-v5.19-rndis_host-enable-the-bogus-MAC-fixup-for-ZTE-device.patch
 delete mode 100644 target/linux/generic/backport-5.10/882-v5.19-rndis_host-limit-scope-of-bogus-MAC-address-detectio.patch
 delete mode 100644 target/linux/generic/backport-5.10/883-v5.11-Bluetooth-btrtl-Refine-the-ic_id_table-for-clearer-a.patch
 delete mode 100644 target/linux/generic/backport-5.10/884-v5.14-Bluetooth-btrtl-rename-USB-fw-for-RTL8761.patch
 delete mode 100644 target/linux/generic/backport-5.10/885-v5.14-Bluetooth-btusb-Add-0x0b05-0x190e-Realtek-8761BU-ASU.patch
 delete mode 100644 target/linux/generic/backport-5.10/886-v5.16-Bluetooth-btusb-Add-support-for-TP-Link-UB500-Adapte.patch
 delete mode 100644 target/linux/generic/backport-5.10/887-v5.18-Bluetooth-btusb-Add-another-Realtek-8761BU.patch
 delete mode 100644 target/linux/generic/config-5.10
 delete mode 100644 target/linux/generic/hack-5.10/100-update-mtk_wed_h.patch
 delete mode 100644 target/linux/generic/hack-5.10/204-module_strip.patch
 delete mode 100644 target/linux/generic/hack-5.10/205-kconfig-abort-configuration-on-unset-symbol.patch
 delete mode 100644 target/linux/generic/hack-5.10/210-darwin_scripts_include.patch
 delete mode 100644 target/linux/generic/hack-5.10/211-darwin-uuid-typedef-clash.patch
 delete mode 100644 target/linux/generic/hack-5.10/212-tools_portability.patch
 delete mode 100644 target/linux/generic/hack-5.10/214-spidev_h_portability.patch
 delete mode 100644 target/linux/generic/hack-5.10/220-arm-gc_sections.patch
 delete mode 100644 target/linux/generic/hack-5.10/221-module_exports.patch
 delete mode 100644 target/linux/generic/hack-5.10/230-openwrt_lzma_options.patch
 delete mode 100644 target/linux/generic/hack-5.10/250-netfilter_depends.patch
 delete mode 100644 target/linux/generic/hack-5.10/251-kconfig.patch
 delete mode 100644 target/linux/generic/hack-5.10/253-ksmbd-config.patch
 delete mode 100644 target/linux/generic/hack-5.10/259-regmap_dynamic.patch
 delete mode 100644 target/linux/generic/hack-5.10/260-crypto_test_dependencies.patch
 delete mode 100644 target/linux/generic/hack-5.10/261-lib-arc4-unhide.patch
 delete mode 100644 target/linux/generic/hack-5.10/280-rfkill-stubs.patch
 delete mode 100644 target/linux/generic/hack-5.10/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
 delete mode 100644 target/linux/generic/hack-5.10/321-powerpc_crtsavres_prereq.patch
 delete mode 100644 target/linux/generic/hack-5.10/401-mtd-super-don-t-reply-on-mtdblock-device-minor.patch
 delete mode 100644 target/linux/generic/hack-5.10/402-mtd-blktrans-call-add-disks-after-mtd-device.patch
 delete mode 100644 target/linux/generic/hack-5.10/410-block-fit-partition-parser.patch
 delete mode 100644 target/linux/generic/hack-5.10/420-mtd-support-OpenWrt-s-MTD_ROOTFS_ROOT_DEV.patch
 delete mode 100644 target/linux/generic/hack-5.10/421-mtd-fix-squashfs-root-on-targets-with-CONFIG_FIT_PAR.patch
 delete mode 100644 target/linux/generic/hack-5.10/422-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch
 delete mode 100644 target/linux/generic/hack-5.10/430-mtk-bmt-support.patch
 delete mode 100644 target/linux/generic/hack-5.10/600-bridge_offload.patch
 delete mode 100644 target/linux/generic/hack-5.10/601-of_net-add-mac-address-ascii-support.patch
 delete mode 100644 target/linux/generic/hack-5.10/645-netfilter-connmark-introduce-set-dscpmark.patch
 delete mode 100644 target/linux/generic/hack-5.10/650-netfilter-add-xt_FLOWOFFLOAD-target.patch
 delete mode 100644 target/linux/generic/hack-5.10/651-wireless_mesh_header.patch
 delete mode 100644 target/linux/generic/hack-5.10/660-fq_codel_defaults.patch
 delete mode 100644 target/linux/generic/hack-5.10/661-kernel-ct-size-the-hashtable-more-adequately.patch
 delete mode 100644 target/linux/generic/hack-5.10/700-swconfig_switch_drivers.patch
 delete mode 100644 target/linux/generic/hack-5.10/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch
 delete mode 100644 target/linux/generic/hack-5.10/720-net-phy-add-aqr-phys.patch
 delete mode 100644 target/linux/generic/hack-5.10/721-net-add-packet-mangeling.patch
 delete mode 100644 target/linux/generic/hack-5.10/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch
 delete mode 100644 target/linux/generic/hack-5.10/723-net-phy-aquantia-fix-system-side-protocol-mi.patch
 delete mode 100644 target/linux/generic/hack-5.10/724-net-phy-aquantia-Add-AQR113-driver-support.patch
 delete mode 100644 target/linux/generic/hack-5.10/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch
 delete mode 100644 target/linux/generic/hack-5.10/760-net-usb-r8152-add-LED-configuration-from-OF.patch
 delete mode 100644 target/linux/generic/hack-5.10/761-dt-bindings-net-add-RTL8152-binding-documentation.patch
 delete mode 100644 target/linux/generic/hack-5.10/773-bgmac-add-srab-switch.patch
 delete mode 100644 target/linux/generic/hack-5.10/780-usb-net-MeigLink_modem_support.patch
 delete mode 100644 target/linux/generic/hack-5.10/800-GPIO-add-named-gpio-exports.patch
 delete mode 100644 target/linux/generic/hack-5.10/810-bcma-ssb-fallback-sprom.patch
 delete mode 100644 target/linux/generic/hack-5.10/901-debloat_sock_diag.patch
 delete mode 100644 target/linux/generic/hack-5.10/902-debloat_proc.patch
 delete mode 100644 target/linux/generic/hack-5.10/904-debloat_dma_buf.patch
 delete mode 100644 target/linux/generic/hack-5.10/910-kobject_uevent.patch
 delete mode 100644 target/linux/generic/hack-5.10/911-kobject_add_broadcast_uevent.patch
 delete mode 100644 target/linux/generic/hack-5.10/920-device_tree_cmdline.patch
 delete mode 100644 target/linux/generic/pending-5.10/050-dtc-checks-Drop-interrupt-provider-address-cells-check.patch
 delete mode 100644 target/linux/generic/pending-5.10/100-compiler.h-only-include-asm-rwonce.h-for-kernel-code.patch
 delete mode 100644 target/linux/generic/pending-5.10/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
 delete mode 100644 target/linux/generic/pending-5.10/110-v6.3-0001-spidev-Add-Silicon-Labs-EM3581-device-compatible.patch
 delete mode 100644 target/linux/generic/pending-5.10/110-v6.3-0002-spidev-Add-Silicon-Labs-SI3210-device-compatible.patch
 delete mode 100644 target/linux/generic/pending-5.10/111-watchdog-max63xx_wdt-Add-support-for-specifying-WDI-.patch
 delete mode 100644 target/linux/generic/pending-5.10/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
 delete mode 100644 target/linux/generic/pending-5.10/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
 delete mode 100644 target/linux/generic/pending-5.10/141-jffs2-add-RENAME_EXCHANGE-support.patch
 delete mode 100644 target/linux/generic/pending-5.10/142-jffs2-add-splice-ops.patch
 delete mode 100644 target/linux/generic/pending-5.10/150-bridge_allow_receiption_on_disabled_port.patch
 delete mode 100644 target/linux/generic/pending-5.10/190-rtc-rs5c372-support_alarms_up_to_1_week.patch
 delete mode 100644 target/linux/generic/pending-5.10/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch
 delete mode 100644 target/linux/generic/pending-5.10/203-kallsyms_uncompressed.patch
 delete mode 100644 target/linux/generic/pending-5.10/205-backtrace_module_info.patch
 delete mode 100644 target/linux/generic/pending-5.10/240-remove-unsane-filenames-from-deps_initramfs-list.patch
 delete mode 100644 target/linux/generic/pending-5.10/261-enable_wilink_platform_without_drivers.patch
 delete mode 100644 target/linux/generic/pending-5.10/270-platform-mikrotik-build-bits.patch
 delete mode 100644 target/linux/generic/pending-5.10/300-mips_expose_boot_raw.patch
 delete mode 100644 target/linux/generic/pending-5.10/301-MIPS-Add-barriers-between-dcache-icache-flushes.patch
 delete mode 100644 target/linux/generic/pending-5.10/302-mips_no_branch_likely.patch
 delete mode 100644 target/linux/generic/pending-5.10/305-mips_module_reloc.patch
 delete mode 100644 target/linux/generic/pending-5.10/307-mips_highmem_offset.patch
 delete mode 100644 target/linux/generic/pending-5.10/308-mips32r2_tune.patch
 delete mode 100644 target/linux/generic/pending-5.10/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch
 delete mode 100644 target/linux/generic/pending-5.10/310-arm_module_unresolved_weak_sym.patch
 delete mode 100644 target/linux/generic/pending-5.10/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
 delete mode 100644 target/linux/generic/pending-5.10/332-arc-add-OWRTDTB-section.patch
 delete mode 100644 target/linux/generic/pending-5.10/333-arc-enable-unaligned-access-in-kernel-mode.patch
 delete mode 100644 target/linux/generic/pending-5.10/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
 delete mode 100644 target/linux/generic/pending-5.10/400-mtd-mtdsplit-support.patch
 delete mode 100644 target/linux/generic/pending-5.10/402-mtd-spi-nor-write-support-for-minor-aligned-partitions.patch
 delete mode 100644 target/linux/generic/pending-5.10/410-mtd-parsers-ofpart-fix-parsing-subpartitions.patch
 delete mode 100644 target/linux/generic/pending-5.10/420-mtd-redboot_space.patch
 delete mode 100644 target/linux/generic/pending-5.10/430-mtd-add-myloader-partition-parser.patch
 delete mode 100644 target/linux/generic/pending-5.10/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
 delete mode 100644 target/linux/generic/pending-5.10/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
 delete mode 100644 target/linux/generic/pending-5.10/435-mtd-add-routerbootpart-parser-config.patch
 delete mode 100644 target/linux/generic/pending-5.10/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
 delete mode 100644 target/linux/generic/pending-5.10/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
 delete mode 100644 target/linux/generic/pending-5.10/465-m25p80-mx-disable-software-protection.patch
 delete mode 100644 target/linux/generic/pending-5.10/476-mtd-spi-nor-add-eon-en25q128.patch
 delete mode 100644 target/linux/generic/pending-5.10/477-mtd-spi-nor-add-eon-en25qx128a.patch
 delete mode 100644 target/linux/generic/pending-5.10/479-mtd-spi-nor-add-xtx-xt25f128b.patch
 delete mode 100644 target/linux/generic/pending-5.10/482-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch
 delete mode 100644 target/linux/generic/pending-5.10/483-mtd-spi-nor-add-gd25q512.patch
 delete mode 100644 target/linux/generic/pending-5.10/483-mtd-spinand-add-support-for-xtx-xt26g0xa.patch
 delete mode 100644 target/linux/generic/pending-5.10/484-mtd-spi-nor-add-esmt-f25l16pa.patch
 delete mode 100644 target/linux/generic/pending-5.10/485-mtd-spi-nor-add-xmc-xm25qh128c.patch
 delete mode 100644 target/linux/generic/pending-5.10/488-mtd-spi-nor-add-xmc-xm25qh64c.patch
 delete mode 100644 target/linux/generic/pending-5.10/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
 delete mode 100644 target/linux/generic/pending-5.10/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
 delete mode 100644 target/linux/generic/pending-5.10/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
 delete mode 100644 target/linux/generic/pending-5.10/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
 delete mode 100644 target/linux/generic/pending-5.10/494-mtd-ubi-add-EOF-marker-support.patch
 delete mode 100644 target/linux/generic/pending-5.10/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
 delete mode 100644 target/linux/generic/pending-5.10/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
 delete mode 100644 target/linux/generic/pending-5.10/498-mtd-spi-nor-locking-support-for-MX25L6405D.patch
 delete mode 100644 target/linux/generic/pending-5.10/499-mtd-spi-nor-disable-16-bit-sr-for-macronix.patch
 delete mode 100644 target/linux/generic/pending-5.10/500-fs_cdrom_dependencies.patch
 delete mode 100644 target/linux/generic/pending-5.10/530-jffs2_make_lzma_available.patch
 delete mode 100644 target/linux/generic/pending-5.10/532-jffs2_eofdetect.patch
 delete mode 100644 target/linux/generic/pending-5.10/600-netfilter_conntrack_flush.patch
 delete mode 100644 target/linux/generic/pending-5.10/610-netfilter_match_bypass_default_checks.patch
 delete mode 100644 target/linux/generic/pending-5.10/611-netfilter_match_bypass_default_table.patch
 delete mode 100644 target/linux/generic/pending-5.10/612-netfilter_match_reduce_memory_access.patch
 delete mode 100644 target/linux/generic/pending-5.10/620-net_sched-codel-do-not-defer-queue-length-update.patch
 delete mode 100644 target/linux/generic/pending-5.10/630-packet_socket_type.patch
 delete mode 100644 target/linux/generic/pending-5.10/655-increase_skb_pad.patch
 delete mode 100644 target/linux/generic/pending-5.10/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
 delete mode 100644 target/linux/generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
 delete mode 100644 target/linux/generic/pending-5.10/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
 delete mode 100644 target/linux/generic/pending-5.10/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
 delete mode 100644 target/linux/generic/pending-5.10/682-of_net-add-mac-address-increment-support.patch
 delete mode 100644 target/linux/generic/pending-5.10/683-of_net-add-mac-address-to-of-tree.patch
 delete mode 100644 target/linux/generic/pending-5.10/684-of_net-do-mac-address-increment-only-once.patch
 delete mode 100644 target/linux/generic/pending-5.10/700-net-ethernet-mtk_eth_soc-avoid-creating-duplicate-of.patch
 delete mode 100644 target/linux/generic/pending-5.10/701-00-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch
 delete mode 100644 target/linux/generic/pending-5.10/701-01-arm64-dts-mediatek-mt7622-add-support-for-coherent-D.patch
 delete mode 100644 target/linux/generic/pending-5.10/701-02-net-ethernet-mtk_eth_soc-add-support-for-Wireless-Et.patch
 delete mode 100644 target/linux/generic/pending-5.10/701-03-net-ethernet-mtk_eth_soc-implement-flow-offloading-t.patch
 delete mode 100644 target/linux/generic/pending-5.10/701-04-arm64-dts-mediatek-mt7622-introduce-nodes-for-Wirele.patch
 delete mode 100644 target/linux/generic/pending-5.10/701-05-net-ethernet-mtk_eth_soc-add-ipv6-flow-offload-suppo.patch
 delete mode 100644 target/linux/generic/pending-5.10/701-06-net-ethernet-mtk_eth_soc-support-TC_SETUP_BLOCK-for-.patch
 delete mode 100644 target/linux/generic/pending-5.10/701-07-net-ethernet-mtk_eth_soc-allocate-struct-mtk_ppe-sep.patch
 delete mode 100644 target/linux/generic/pending-5.10/701-08-net-ethernet-mtk_eth_soc-rework-hardware-flow-table-.patch
 delete mode 100644 target/linux/generic/pending-5.10/701-09-net-ethernet-mtk_eth_soc-remove-bridge-flow-offload-.patch
 delete mode 100644 target/linux/generic/pending-5.10/701-10-net-ethernet-mtk_eth_soc-support-creating-mac-addres.patch
 delete mode 100644 target/linux/generic/pending-5.10/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch
 delete mode 100644 target/linux/generic/pending-5.10/703-phy-add-detach-callback-to-struct-phy_driver.patch
 delete mode 100644 target/linux/generic/pending-5.10/704-00-netfilter-flowtable-fix-excessive-hw-offload-attempt.patch
 delete mode 100644 target/linux/generic/pending-5.10/704-01-netfilter-nft_flow_offload-skip-dst-neigh-lookup-for.patch
 delete mode 100644 target/linux/generic/pending-5.10/704-02-net-fix-dev_fill_forward_path-with-pppoe-bridge.patch
 delete mode 100644 target/linux/generic/pending-5.10/704-03-netfilter-nft_flow_offload-fix-offload-with-pppoe-vl.patch
 delete mode 100644 target/linux/generic/pending-5.10/705-net-dsa-tag_mtk-add-padding-for-tx-packets.patch
 delete mode 100644 target/linux/generic/pending-5.10/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch
 delete mode 100644 target/linux/generic/pending-5.10/750-skb-Do-mix-page-pool-and-page-referenced-frags-in-GR.patch
 delete mode 100644 target/linux/generic/pending-5.10/760-net-dsa-mv88e6xxx-fix-vlan-setup.patch
 delete mode 100644 target/linux/generic/pending-5.10/762-net-bridge-switchdev-Refactor-br_switchdev_fdb_notif.patch
 delete mode 100644 target/linux/generic/pending-5.10/763-net-bridge-switchdev-Include-local-flag-in-FDB-notif.patch
 delete mode 100644 target/linux/generic/pending-5.10/764-net-bridge-switchdev-Send-FDB-notifications-for-host.patch
 delete mode 100644 target/linux/generic/pending-5.10/765-net-dsa-Include-local-addresses-in-assisted-CPU-port.patch
 delete mode 100644 target/linux/generic/pending-5.10/766-net-dsa-Include-bridge-addresses-in-assisted-CPU-por.patch
 delete mode 100644 target/linux/generic/pending-5.10/767-net-dsa-Sync-static-FDB-entries-on-foreign-interface.patch
 delete mode 100644 target/linux/generic/pending-5.10/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch
 delete mode 100644 target/linux/generic/pending-5.10/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch
 delete mode 100644 target/linux/generic/pending-5.10/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
 delete mode 100644 target/linux/generic/pending-5.10/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch
 delete mode 100644 target/linux/generic/pending-5.10/802-nvmem-u-boot-env-align-endianness-of-crc32-values.patch
 delete mode 100644 target/linux/generic/pending-5.10/810-pci_disable_common_quirks.patch
 delete mode 100644 target/linux/generic/pending-5.10/811-pci_disable_usb_common_quirks.patch
 delete mode 100644 target/linux/generic/pending-5.10/820-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
 delete mode 100644 target/linux/generic/pending-5.10/834-ledtrig-libata.patch
 delete mode 100644 target/linux/generic/pending-5.10/840-hwrng-bcm2835-set-quality-to-1000.patch
 delete mode 100644 target/linux/generic/pending-5.10/842-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0001-PCI-aardvark-Replace-custom-PCIE_CORE_INT_-macros-wi.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0004-PCI-aardvark-Rewrite-IRQ-code-to-chained-IRQ-handler.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0005-PCI-aardvark-Check-return-value-of-generic_handle_do.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0006-PCI-aardvark-Make-MSI-irq_chip-structures-static-dri.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0007-PCI-aardvark-Make-msi_domain_info-structure-a-static.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0008-PCI-aardvark-Use-dev_fwnode-instead-of-of_node_to_fw.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0009-PCI-aardvark-Refactor-unmasking-summary-MSI-interrup.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0010-PCI-aardvark-Add-support-for-masking-MSI-interrupts.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0011-PCI-aardvark-Fix-setting-MSI-address.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0012-PCI-aardvark-Enable-MSI-X-support.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0013-PCI-aardvark-Add-support-for-ERR-interrupt-on-emulat.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0015-PCI-aardvark-Optimize-writing-PCI_EXP_RTCTL_PMEIE-an.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0016-PCI-aardvark-Add-support-for-PME-interrupts.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0017-PCI-aardvark-Fix-support-for-PME-requester-on-emulat.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0018-PCI-aardvark-Use-separate-INTA-interrupt-for-emulate.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0019-PCI-aardvark-Remove-irq_mask_ack-callback-for-INTx-i.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0020-PCI-aardvark-Don-t-mask-irq-when-mapping.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0021-PCI-aardvark-Drop-__maybe_unused-from-advk_pcie_disa.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0022-PCI-aardvark-Update-comment-about-link-going-down-af.patch
 delete mode 100644 target/linux/generic/pending-5.10/850-0023-PCI-aardvark-Make-main-irq_chip-structure-a-static-d.patch
 delete mode 100644 target/linux/generic/pending-5.10/851-0001-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch
 delete mode 100644 target/linux/generic/pending-5.10/851-0002-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch
 delete mode 100644 target/linux/generic/pending-5.10/851-0003-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch
 delete mode 100644 target/linux/generic/pending-5.10/851-0004-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch
 delete mode 100644 target/linux/generic/pending-5.10/851-0005-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch
 delete mode 100644 target/linux/generic/pending-5.10/851-0006-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch
 delete mode 100644 target/linux/generic/pending-5.10/920-mangle_bootargs.patch
 delete mode 100644 target/linux/ipq806x/config-5.10
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062.dtsi
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-db149.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-g10.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-xr500.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065.dtsi
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-mr42.dts
 delete mode 100644 target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-mr52.dts
 delete mode 100644 target/linux/ipq806x/patches-5.10/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/0067-generic-Mangle-bootloader-s-kernel-arguments.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/0072-add-ipq806x-with-no-clocks.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/084-ipq8064-v1.0-dtsi-cleanup.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/085-ipq8064-v1.0-dtsi-additions.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/093-drivers-cpufreq-qcom-cpufreq-nvmem-support-specific-.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/097-1-ipq806x-gcc-add-missing-clk-flag.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/097-2-ipq806x-lcc-add-missing-reset.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/097-3-clk-qcom-krait-add-missing-enable-disable.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/097-4-ipq806x-gcc-add-missing-clk-and-reset-for-crypto-eng.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/098-2-Documentation-cpufreq-add-qcom-krait-cpufreq-binding.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/098-3-add-fab-scaling-support-with-cpufreq.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/100-v5.11-dmaengine-qcom-add_ADM_driver.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/101-5.12-mtd-parsers-Add-Qcom-SMEM-parser.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/101-dwmac-ipq806x-qsgmii-pcs-all-ch-ctl.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/102-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/103-ARM-dts-qcom-reduce-pci-IO-size-to-64K.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/104-2-drivers-thermal-tsens-Don-t-hardcode-sensor-slope.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/104-3-drivers-thermal-tsens-Convert-msm8960-to-reg_field.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/104-4-drivers-thermal-tsens-Use-init_common-for-msm8960.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/104-5-drivers-thermal-tsens-Fix-bug-in-sensor-enable-for-m.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/104-6-drivers-thermal-tsens-Replace-custom-8960-apis-with-.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/104-7-drivers-thermal-tsens-Drop-unused-define-for-msm8960.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/104-8-drivers-thermal-tsens-Add-support-for-ipq8064-tsens.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/104-9-dt-bindings-thermal-tsens-Document-ipq8064-bindings.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/105-10-drivers-thermal-tsens-Fix-wrong-slope-on-msm-8960.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/107-1-thermal-qcom-tsens-init-debugfs-only-with-successful.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/107-2-thermal-qcom-tsens-simplify-debugfs-init-function.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/108-v5.14-net-stmmac-explicitly-deassert-gmac-ahb-reset.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/109-v5.15-arm-dts-qcom-add-ahb-reset-to-ipq806x-gmac.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/850-soc-add-qualcomm-syscon.patch
 delete mode 100644 target/linux/ipq806x/patches-5.10/900-arm-add-cmdline-override.patch
 delete mode 100644 target/linux/kirkwood/config-5.10
 delete mode 100644 target/linux/kirkwood/patches-5.10/100-ib62x0.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/101-iconnect.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/102-dockstar.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/103-iomega-ix2-200.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/105-linksys-viper-dts.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/106-goflexnet.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/107-01-zyxel-nsa3x0-common-nand-partitions.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/107-03-nsa325.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/109-pogoplug_v4.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/110-pogo_e02.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/111-l-50.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/112-sheevaplug.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/113-readynas_duo_v2.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/203-blackarmor-nas220.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/800-power-reset-linkstation-poweroff-prepare-for-new-dev.patch
 delete mode 100644 target/linux/kirkwood/patches-5.10/801-power-reset-linkstation-poweroff-add-new-device.patch
 delete mode 100644 target/linux/lantiq/ase/config-5.10
 delete mode 100644 target/linux/lantiq/config-5.10
 delete mode 100644 target/linux/lantiq/falcon/config-5.10
 delete mode 100644 target/linux/lantiq/patches-5.10/0001-MIPS-lantiq-add-pcie-driver.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0004-MIPS-lantiq-add-atm-hack.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0008-MIPS-lantiq-backport-old-timer-code.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0018-MTD-nand-lots-of-xrx200-fixes.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0023-NET-PHY-add-led-support-for-intel-xway.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0042-arch-mips-increase-io_space_limit.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0051-MIPS-lantiq-improve-USB-initialization.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0101-find_active_root.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0151-lantiq-ifxmips_pcie-use-of.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0152-lantiq-VPE.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0154-lantiq-pci-bar11mask-fix.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0155-lantiq-VPE-nosmp.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0160-owrt-lantiq-multiple-flash.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0310-v5.16-MIPS-lantiq-dma-make-the-burst-length-configurable-b.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0320-v6.1-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0400-mtd-rawnand-xway-don-t-yield-while-holding-spinlock.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0701-NET-lantiq-etop-of-mido.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0702-v5.16-net-lantiq-add-support-for-jumbo-frames.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0703-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0704-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0712-v5.16-net-ethernet-lantiq_etop-Fix-compilation-error.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0713-v5.17-MIPS-lantiq-dma-increase-descritor-count.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0714-v5.17-net-lantiq_xrx200-increase-napi-poll-weigth.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0715-v5.17-net-lantiq_xrx200-convert-to-build_skb.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0716-v5.17-net-lantiq_xrx200-fix-use-after-free-bug.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0717-v6.0-net-lantiq_xrx200-confirm-skb-is-allocated-before-us.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0718-v6.0-net-lantiq_xrx200-fix-lock-under-memory-pressure.patch
 delete mode 100644 target/linux/lantiq/patches-5.10/0719-v6.0-net-lantiq_xrx200-restore-buffer-if-memory-allocatio.patch
 delete mode 100644 target/linux/lantiq/xrx200/config-5.10
 delete mode 100644 target/linux/lantiq/xway/config-5.10
 delete mode 100644 target/linux/lantiq/xway_legacy/config-5.10
 delete mode 100644 target/linux/layerscape/armv7/config-5.10
 delete mode 100644 target/linux/layerscape/armv8_64b/config-5.10
 delete mode 100644 target/linux/layerscape/patches-5.10/300-add-DTS-for-Traverse-LS1043-Boards.patch
 delete mode 100644 target/linux/layerscape/patches-5.10/301-arm-dts-ls1021a-Add-LS1021A-IOT-board-support.patch
 delete mode 100644 target/linux/layerscape/patches-5.10/302-arm64-dts-ls1012a-update-with-ppfe-support.patch
 delete mode 100644 target/linux/layerscape/patches-5.10/303-arm64-dts-ls1012a-frdm-workaround-by-updating-qspi-f.patch
 delete mode 100644 target/linux/layerscape/patches-5.10/304-arm64-dts-ls1012a-rdb-workaround-by-updating-qspi-fl.patch
 delete mode 100644 target/linux/layerscape/patches-5.10/305-arm64-dts-ls1046a-rdb-Update-qspi-spi-rx-bus-width-t.patch
 delete mode 100644 target/linux/layerscape/patches-5.10/400-LF-20-3-mtd-spi-nor-Use-1-bit-mode-of-spansion-s25fs.patch
 delete mode 100644 target/linux/layerscape/patches-5.10/701-staging-add-fsl_ppfe-driver.patch
 delete mode 100644 target/linux/layerscape/patches-5.10/702-phy-Add-2.5G-SGMII-interface-mode.patch
 delete mode 100644 target/linux/malta/config-5.10
 delete mode 100644 target/linux/mpc85xx/config-5.10
 delete mode 100644 target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
 delete mode 100644 target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1-support.patch
 delete mode 100644 target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330-support.patch
 delete mode 100644 target/linux/mpc85xx/patches-5.10/102-powerpc-add-cmdline-override.patch
 delete mode 100644 target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w-rev1.patch
 delete mode 100644 target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
 delete mode 100644 target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda-support.patch
 delete mode 100644 target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i-support.patch
 delete mode 100644 target/linux/mpc85xx/patches-5.10/107-powerpc-85xx-add-ws-ap3825i-support.patch
 delete mode 100644 target/linux/mpc85xx/patches-5.10/108-powerpc-85xx-firebox-t10-support.patch.patch
 delete mode 100644 target/linux/mpc85xx/patches-5.10/109-powerpc-85xx-add-ws-ap3715i-support.patch
 delete mode 100644 target/linux/mpc85xx/patches-5.10/900-powerpc-bootwrapper-disable-uImage-generation.patch
 delete mode 100644 target/linux/mvebu/config-5.10
 delete mode 100644 target/linux/mvebu/cortexa53/config-5.10
 delete mode 100644 target/linux/mvebu/cortexa72/config-5.10
 delete mode 100644 target/linux/mvebu/cortexa9/config-5.10
 delete mode 100644 target/linux/mvebu/patches-5.10/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/002-v5.11-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/003-v5.11-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/004-v5.11-ARM-dts-turris-omnia-describe-switch-interrupt.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/005-v5.11-ARM-dts-turris-omnia-add-SFP-node.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/006-v5.11-ARM-dts-turris-omnia-add-LED-controller-node.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/007-v5.11-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/008-v5.12-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/100-mvebu-dt-ARM-dts-turris-omnia-configure-LED-0-pin-function-to.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/101-mvebu-dt-ARM-dts-turris-omnia-enable-LED-controller-node.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/102-leds-turris-omnia-support-HW-controlled-mode-via-pri.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/103-leds-turris-omnia-initialize-multi-intensity-to-full.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/104-leds-turris-omnia-change-max-brightness-from-255-to-.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/301-mvebu-armada-38x-enable-libata-leds.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/302-add_powertables.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/303-linksys_hardcode_nand_ecc_settings.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/304-revert_i2c_delay.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/305-armada-385-rd-mtd-partitions.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/306-ARM-mvebu-385-ap-Add-partitions.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/307-armada-xp-linksys-mamba-broken-idle.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/308-armada-xp-linksys-mamba-wan.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/309-linksys-status-led.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/310-linksys-use-eth0-as-cpu-port.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/311-adjust-compatible-for-linksys.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/313-helios4-dts-status-led-alias.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/315-armada-xp-linksys-mamba-resize-kernel.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/316-armada-370-dts-fix-crypto-engine.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/400-find_active_root.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/700-mvneta-tx-queue-workaround.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/701-v5.14-net-ethernet-marvell-mvnetaMQPrio.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/801-pci-mvebu-time-out-reset-on-link-up.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/905-Documentation-ABI-Add-iei-wt61p803-puzzle-driver-sys.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/910-drivers-leds-wt61p803-puzzle-improvements.patch
 delete mode 100644 target/linux/mvebu/patches-5.10/911-drivers-leds-wt61p803-puzzle-mcu-retry.patch
 delete mode 100644 target/linux/octeon/config-5.10
 delete mode 100644 target/linux/octeon/patches-5.10/100-mips_image_cmdline_hack.patch
 delete mode 100644 target/linux/octeon/patches-5.10/100-ubnt_edgerouter2_support.patch
 delete mode 100644 target/linux/octeon/patches-5.10/110-er200-ethernet_probe_order.patch
 delete mode 100644 target/linux/octeon/patches-5.10/120-cmdline-hack.patch
 delete mode 100644 target/linux/octeon/patches-5.10/130-itus_shield_support.patch
 delete mode 100644 target/linux/octeon/patches-5.10/140-octeon_e300_support.patch
 delete mode 100644 target/linux/octeon/patches-5.10/150-ubnt_usg_support.patch
 delete mode 100644 target/linux/octeon/patches-5.10/700-allocate_interface_by_label.patch
 delete mode 100644 target/linux/octeon/patches-5.10/701-honor_sgmii_node_device_tree_status.patch
 delete mode 100644 target/linux/omap/config-5.10
 delete mode 100644 target/linux/pistachio/config-5.10
 delete mode 100644 target/linux/pistachio/patches-5.10/101-dmaengine-img-mdc-Handle-early-status-read.patch
 delete mode 100644 target/linux/pistachio/patches-5.10/102-spi-img-spfi-Implement-dual-and-quad-mode.patch
 delete mode 100644 target/linux/pistachio/patches-5.10/104-spi-img-spfi-use-device-0-configuration-for-all-devi.patch
 delete mode 100644 target/linux/pistachio/patches-5.10/105-spi-img-spfi-RX-maximum-burst-size-for-DMA-is-8.patch
 delete mode 100644 target/linux/pistachio/patches-5.10/106-spi-img-spfi-finish-every-transfer-cleanly.patch
 delete mode 100644 target/linux/pistachio/patches-5.10/108-clk-pistachio-Fix-wrong-SDHost-card-speed.patch
 delete mode 100644 target/linux/pistachio/patches-5.10/109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch
 delete mode 100644 target/linux/pistachio/patches-5.10/401-mtd-nor-support-mtd-name-from-device-tree.patch
 delete mode 100644 target/linux/pistachio/patches-5.10/901-MIPS-DTS-img-marduk-Add-SPI-NAND-flash.patch
 delete mode 100644 target/linux/pistachio/patches-5.10/902-MIPS-DTS-img-marduk-Add-Cascoda-CA8210-6LoWPAN.patch
 delete mode 100644 target/linux/pistachio/patches-5.10/903-MIPS-DTS-img-marduk-Add-NXP-SC16IS752IPW.patch
 delete mode 100644 target/linux/pistachio/patches-5.10/904-MIPS-DTS-img-marduk-Add-partition-name.patch
 delete mode 100644 target/linux/pistachio/patches-5.10/905-MIPS-DTS-img-marduk-Add-led-aliases.patch
 delete mode 100644 target/linux/ramips/mt7620/config-5.10
 delete mode 100644 target/linux/ramips/mt7621/config-5.10
 delete mode 100644 target/linux/ramips/mt76x8/config-5.10
 delete mode 100644 target/linux/ramips/patches-5.10/020-mips-ralink-manage-low-reset-lines.patch
 delete mode 100644 target/linux/ramips/patches-5.10/108-PCI-mt7621-Delay-phy-ports-initialization.patch
 delete mode 100644 target/linux/ramips/patches-5.10/200-add-ralink-eth.patch
 delete mode 100644 target/linux/ramips/patches-5.10/201-MIPS-ralink-rt288x-select-MIPS_AUTO_PFN_OFFSET.patch
 delete mode 100644 target/linux/ramips/patches-5.10/203-staging-mt7621-pci-phy-kconfig-select-regmap-mmio.patch
 delete mode 100644 target/linux/ramips/patches-5.10/300-mt7620-export-chip-version-and-pkg.patch
 delete mode 100644 target/linux/ramips/patches-5.10/311-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
 delete mode 100644 target/linux/ramips/patches-5.10/312-MIPS-ralink-add-cpu-frequency-scaling.patch
 delete mode 100644 target/linux/ramips/patches-5.10/314-MIPS-add-bootargs-override-property.patch
 delete mode 100644 target/linux/ramips/patches-5.10/315-owrt-hack-fix-mt7688-cache-issue.patch
 delete mode 100644 target/linux/ramips/patches-5.10/316-arch-mips-do-not-select-illegal-access-driver-by-def.patch
 delete mode 100644 target/linux/ramips/patches-5.10/320-MIPS-add-support-for-buggy-MT7621S-core-detection.patch
 delete mode 100644 target/linux/ramips/patches-5.10/322-mt7621-fix-cpu-clk-add-clkdev.patch
 delete mode 100644 target/linux/ramips/patches-5.10/323-mt7621-memory-detect.patch
 delete mode 100644 target/linux/ramips/patches-5.10/324-mt7621-perfctr-fix.patch
 delete mode 100644 target/linux/ramips/patches-5.10/325-mt7621-fix-memory-detect.patch
 delete mode 100644 target/linux/ramips/patches-5.10/400-mtd-cfi-cmdset-0002-force-word-write.patch
 delete mode 100644 target/linux/ramips/patches-5.10/405-mtd-spi-nor-Add-support-for-BoHong-bh25q128as.patch
 delete mode 100644 target/linux/ramips/patches-5.10/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch
 delete mode 100644 target/linux/ramips/patches-5.10/411-dt-bindings-add-documentation-for-mt7621-nand-driver.patch
 delete mode 100644 target/linux/ramips/patches-5.10/700-net-ethernet-mediatek-support-net-labels.patch
 delete mode 100644 target/linux/ramips/patches-5.10/720-Revert-net-phy-simplify-phy_link_change-arguments.patch
 delete mode 100644 target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch
 delete mode 100644 target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch
 delete mode 100644 target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
 delete mode 100644 target/linux/ramips/patches-5.10/803-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch
 delete mode 100644 target/linux/ramips/patches-5.10/804-staging-mt7621-pinctrl-use-ngpios-not-num-gpios.patch
 delete mode 100644 target/linux/ramips/patches-5.10/805-pinctrl-AW9523.patch
 delete mode 100644 target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch
 delete mode 100644 target/linux/ramips/patches-5.10/820-DT-Add-documentation-for-spi-rt2880.patch
 delete mode 100644 target/linux/ramips/patches-5.10/821-SPI-ralink-add-Ralink-SoC-spi-driver.patch
 delete mode 100644 target/linux/ramips/patches-5.10/825-i2c-MIPS-adds-ralink-I2C-driver.patch
 delete mode 100644 target/linux/ramips/patches-5.10/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
 delete mode 100644 target/linux/ramips/patches-5.10/835-asoc-add-mt7620-support.patch
 delete mode 100644 target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch
 delete mode 100644 target/linux/ramips/patches-5.10/845-pwm-add-mediatek-support.patch
 delete mode 100644 target/linux/ramips/patches-5.10/850-awake-rt305x-dwc2-controller.patch
 delete mode 100644 target/linux/ramips/patches-5.10/855-linkit_bootstrap.patch
 delete mode 100644 target/linux/ramips/rt288x/config-5.10
 delete mode 100644 target/linux/ramips/rt305x/config-5.10
 delete mode 100644 target/linux/ramips/rt3883/config-5.10
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10mp-f.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_engenius_ews2910p.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_hpe_1920-8g.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_1xx.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_3xx.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_netgear_gs108t-v3.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_netgear_gs110tpp-v1.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_netgear_gs308t-v1.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_netgear_gs310tp-v1.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_panasonic_m8eg-pn28080k.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_tplink_sg2008p-v1.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_tplink_sg2210p-v3.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_tplink_sg2xxx.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-10hp.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v1.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v2.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_allnet_all-sg8208m.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_apresia_aplgs120gtss.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-16.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-20.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28_common.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28mp-f.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_hpe_1920-16g.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_hpe_1920-24g.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_hpe_1920.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_inaba_aml2-17gp.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_iodata_bsh-g24mb.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_panasonic_m16eg-pn28160k.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_panasonic_m24eg-pn28240k.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-16.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24-v1.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24e.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v1.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v2.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl838x.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl838x_hpe_1920.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8393_d-link_dgs-1210-52.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8393_netgear_gs750e.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8393_panasonic_m48eg-pn28480k.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl8393_zyxel_gs1900-48.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl839x.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl839x_d-link_dgs-1210_gpio.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl83xx_d-link_dgs-1210_common.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl83xx_d-link_dgs-1210_gpio.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl9302_zyxel_xgs1250-12.dts
 delete mode 100644 target/linux/realtek/dts-5.10/rtl930x.dtsi
 delete mode 100644 target/linux/realtek/dts-5.10/rtl931x.dtsi
 delete mode 100644 target/linux/realtek/files-5.10/Documentation/devicetree/bindings/realtek,otto-timer.yaml
 delete mode 100644 target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/ioremap.h
 delete mode 100644 target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h
 delete mode 100644 target/linux/realtek/files-5.10/arch/mips/kernel/cevt-rtl9300.c
 delete mode 100644 target/linux/realtek/files-5.10/arch/mips/rtl838x/Makefile
 delete mode 100644 target/linux/realtek/files-5.10/arch/mips/rtl838x/Platform
 delete mode 100644 target/linux/realtek/files-5.10/arch/mips/rtl838x/prom.c
 delete mode 100644 target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/clk/realtek/Kconfig
 delete mode 100644 target/linux/realtek/files-5.10/drivers/clk/realtek/Makefile
 delete mode 100644 target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl838x-sram.S
 delete mode 100644 target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl839x-sram.S
 delete mode 100644 target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl83xx.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl83xx.h
 delete mode 100644 target/linux/realtek/files-5.10/drivers/clocksource/timer-rtl-otto.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/gpio/gpio-rtl8231.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/i2c/busses/i2c-rtl9300.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/i2c/busses/i2c-rtl9300.h
 delete mode 100644 target/linux/realtek/files-5.10/drivers/i2c/muxes/i2c-mux-rtl9300.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/Kconfig
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/Makefile
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/debugfs.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/qos.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl83xx.h
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl930x.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl931x.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/tc.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.c
 delete mode 100644 target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.h
 delete mode 100644 target/linux/realtek/files-5.10/include/dt-bindings/clock/rtl83xx-clk.h
 delete mode 100644 target/linux/realtek/patches-5.10/001-5.13-dt-bindings-gpio-binding-for-realtek-otto-gpio.patch
 delete mode 100644 target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch
 delete mode 100644 target/linux/realtek/patches-5.10/003-5.12-spi-realtek-rtl838x-rtl839x-spi-controller.patch
 delete mode 100644 target/linux/realtek/patches-5.10/004-5.12-spi-realtek-rtl-add-support-for-realtek-rtl838x-rtl839x-spi-controllers.patch
 delete mode 100644 target/linux/realtek/patches-5.10/005-5.12-dt-bindings-interrupt-controller-add-realtek-rtl838x-rtl839x-support.patch
 delete mode 100644 target/linux/realtek/patches-5.10/006-5.12-irqchip-add-support-for-realtek-rtl838x-rtl839x-interrupt-controller.patch
 delete mode 100644 target/linux/realtek/patches-5.10/007-5.16-gpio-realtek-realtek-otto-fix-gpio-line-irq-offset.patch
 delete mode 100644 target/linux/realtek/patches-5.10/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch
 delete mode 100644 target/linux/realtek/patches-5.10/020-v5.17-net-mdio-add-helpers-to-extract-clause-45-regad-and-.patch
 delete mode 100644 target/linux/realtek/patches-5.10/021-v5.19-02-gpio-realtek-otto-Support-reversed-port-layouts.patch
 delete mode 100644 target/linux/realtek/patches-5.10/021-v5.19-03-gpio-realtek-otto-Support-per-cpu-interrupts.patch
 delete mode 100644 target/linux/realtek/patches-5.10/021-v5.19-04-gpio-realtek-otto-Add-RTL930x-support.patch
 delete mode 100644 target/linux/realtek/patches-5.10/021-v5.19-06-gpio-realtek-otto-Add-RTL931x-support.patch
 delete mode 100644 target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch
 delete mode 100644 target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch
 delete mode 100644 target/linux/realtek/patches-5.10/302-clocksource-add-otto-driver.patch
 delete mode 100644 target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch
 delete mode 100644 target/linux/realtek/patches-5.10/304-spi-update-dependency-for-spi-realtek-rtl.patch
 delete mode 100644 target/linux/realtek/patches-5.10/305-irqchip-update-dependency-for-irq-realtek-rtl.patch
 delete mode 100644 target/linux/realtek/patches-5.10/307-wdt-update-dependency-for-realtek-otto-wdt.patch
 delete mode 100644 target/linux/realtek/patches-5.10/308-otto-wdt-fix-missing-math-header.patch
 delete mode 100644 target/linux/realtek/patches-5.10/309-cevt-rtl9300-support.patch
 delete mode 100644 target/linux/realtek/patches-5.10/310-add-i2c-rtl9300-support.patch
 delete mode 100644 target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch
 delete mode 100644 target/linux/realtek/patches-5.10/315-irqchip-irq-realtek-rtl-add-VPE-support.patch
 delete mode 100644 target/linux/realtek/patches-5.10/316-otto-gpio-uniprocessor-irq-mask.patch
 delete mode 100644 target/linux/realtek/patches-5.10/317-gpio-realtek-otto-switch-to-32-bit-I-O.patch
 delete mode 100644 target/linux/realtek/patches-5.10/318-add-rtl83xx-clk-support.patch
 delete mode 100644 target/linux/realtek/patches-5.10/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch
 delete mode 100644 target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch
 delete mode 100644 target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch
 delete mode 100644 target/linux/realtek/patches-5.10/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch
 delete mode 100644 target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch
 delete mode 100644 target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch
 delete mode 100644 target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch
 delete mode 100644 target/linux/realtek/patches-5.10/704-include-linux-add-phy-hsgmii-mode.patch
 delete mode 100644 target/linux/realtek/patches-5.10/705-add-rtl-phy.patch
 delete mode 100644 target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch
 delete mode 100644 target/linux/realtek/patches-5.10/708-brflood-api.patch
 delete mode 100644 target/linux/realtek/patches-5.10/709-lag-offloading.patch
 delete mode 100644 target/linux/realtek/patches-5.10/710-net-phy-sfp-re-probe-modules-on-DEV_UP-event.patch
 delete mode 100644 target/linux/realtek/patches-5.10/711-net-phy-add-an-MDIO-SMBus-library.patch
 delete mode 100644 target/linux/realtek/patches-5.10/712-net-phy-sfp-add-support-for-SMBus.patch
 delete mode 100644 target/linux/realtek/patches-5.10/713-v5.12-net-dsa-configure-better-brport-flags-when-ports-lea.patch
 delete mode 100644 target/linux/realtek/patches-5.10/800-net-mdio-support-hardware-assisted-indirect-access.patch
 delete mode 100644 target/linux/realtek/rtl838x/config-5.10
 delete mode 100644 target/linux/realtek/rtl839x/config-5.10
 delete mode 100644 target/linux/realtek/rtl930x/config-5.10
 delete mode 100644 target/linux/realtek/rtl931x/config-5.10
 delete mode 100644 target/linux/rockchip/armv8/config-5.10
 delete mode 100644 target/linux/rockchip/patches-5.10/004-v5.13-rockchip-rk3399-Add-support-for-FriendlyARM-NanoPi-R.patch
 delete mode 100644 target/linux/rockchip/patches-5.10/005-arm64-dts-rockchip-add-EEPROM-node-for-NanoPi-R4S.patch
 delete mode 100644 target/linux/rockchip/patches-5.10/100-rockchip-use-system-LED-for-OpenWrt.patch
 delete mode 100644 target/linux/rockchip/patches-5.10/101-dts-rockchip-add-usb3-controller-node-for-RK3328-SoCs.patch
 delete mode 100644 target/linux/rockchip/patches-5.10/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch
 delete mode 100644 target/linux/rockchip/patches-5.10/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch
 delete mode 100644 target/linux/rockchip/patches-5.10/104-rockchip-use-USB-host-by-default-on-rk3399-rock-pi-4.patch
 delete mode 100644 target/linux/rockchip/patches-5.10/105-nanopi-r4s-sd-signalling.patch
 delete mode 100644 target/linux/rockchip/patches-5.10/106-r4s-openwrt-leds.patch
 delete mode 100644 target/linux/sunxi/cortexa53/config-5.10
 delete mode 100644 target/linux/sunxi/cortexa7/config-5.10
 delete mode 100644 target/linux/sunxi/cortexa8/config-5.10
 delete mode 100644 target/linux/tegra/config-5.10
 delete mode 100644 target/linux/tegra/patches-5.10/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch
 delete mode 100644 target/linux/tegra/patches-5.10/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch
 delete mode 100644 target/linux/uml/config-5.10
 delete mode 100644 target/linux/uml/patches-5.10/001-um-Fix-build-w-o-CONFIG_PM_SLEEP.patch
 delete mode 100644 target/linux/uml/patches-5.10/101-mconsole-exec.patch
 delete mode 100644 target/linux/uml/patches-5.10/102-pseudo-random-mac.patch
 delete mode 100644 target/linux/x86/64/config-5.10
 delete mode 100644 target/linux/x86/config-5.10
 delete mode 100644 target/linux/x86/generic/config-5.10
 delete mode 100644 target/linux/x86/geode/config-5.10
 delete mode 100644 target/linux/x86/legacy/config-5.10
 delete mode 100644 target/linux/x86/patches-5.10/100-fix_cs5535_clockevt.patch
 delete mode 100644 target/linux/x86/patches-5.10/101-v5.15-mfd-lpc_ich-Enable-GPIO-driver-for-DH89xxCC.patch
 delete mode 100644 target/linux/x86/patches-5.10/102-v5.15-platform-x86-add-meraki-mx100-platform-driver.patch
 delete mode 100644 target/linux/x86/patches-5.10/113-v5.21-platform-x86-pmc_atom-Add-Lex-3I380NX-industrial-PC-.patch
 delete mode 100644 target/linux/x86/patches-5.10/300-pcengines_apu1_led.patch

diff --git a/include/kernel-5.10 b/include/kernel-5.10
deleted file mode 100644
index bc3926bb3df1..000000000000
--- a/include/kernel-5.10
+++ /dev/null
@@ -1,2 +0,0 @@
-LINUX_VERSION-5.10 = .179
-LINUX_KERNEL_HASH-5.10.179 = 1bbd445c154b053eea46acc883be548a98179988a9ed3a0b81bddfbf30a37e29
diff --git a/target/linux/apm821xx/config-5.10 b/target/linux/apm821xx/config-5.10
deleted file mode 100644
index 89d72e2641b8..000000000000
--- a/target/linux/apm821xx/config-5.10
+++ /dev/null
@@ -1,244 +0,0 @@
-# CONFIG_40x is not set
-CONFIG_44x=y
-CONFIG_4xx=y
-CONFIG_4xx_SOC=y
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_APM821xx=y
-# CONFIG_APOLLO3G is not set
-# CONFIG_ARCHES is not set
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS=11
-CONFIG_ARCH_MMAP_RND_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_BITS_MIN=11
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_BAMBOO is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLUESTONE=y
-CONFIG_BOOKE=y
-CONFIG_BOOKE_WDT=y
-# CONFIG_CANYONLANDS is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DEV_PPC4XX=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_MD5_PPC is not set
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_SHA1_PPC is not set
-CONFIG_DATA_SHIFT=12
-CONFIG_DMADEVICES=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DTC=y
-CONFIG_DW_DMAC=y
-CONFIG_DW_DMAC_CORE=y
-# CONFIG_E200 is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EBONY is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-# CONFIG_EIGER is not set
-CONFIG_EXTRA_TARGETS="uImage"
-CONFIG_FIXED_PHY=y
-CONFIG_FORCE_PCI=y
-# CONFIG_FSL_LBC is not set
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_GLACIER is not set
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_PPC4XX=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IBM_IIC=y
-CONFIG_IBM_EMAC=y
-CONFIG_IBM_EMAC_EMAC4=y
-CONFIG_IBM_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_EMAC_RGMII=y
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_EMAC_TAH=y
-CONFIG_IBM_EMAC_TXB=128
-# CONFIG_ICON is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_KATMAI is not set
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_LEDS_TRIGGER_MTD=y
-CONFIG_LEDS_TRIGGER_PATTERN=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MMU_GATHER_PAGE_SIZE=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_IRQS=512
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-CONFIG_PACKING=y
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_ARCH_FALLBACKS=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYS_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-# CONFIG_PMU_SYSFS is not set
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_PPC44x_SIMPLE=y
-CONFIG_PPC4xx_GPIO=y
-CONFIG_PPC4xx_MSI=y
-CONFIG_PPC4xx_PCI_EXPRESS=y
-# CONFIG_PPC64 is not set
-# CONFIG_PPC_47x is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
-CONFIG_PPC_ADV_DEBUG_DVCS=2
-CONFIG_PPC_ADV_DEBUG_IACS=4
-CONFIG_PPC_ADV_DEBUG_REGS=y
-# CONFIG_PPC_BOOK3S_6xx is not set
-CONFIG_PPC_DCR=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-CONFIG_PPC_FPU=y
-CONFIG_PPC_INDIRECT_PCI=y
-# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_MSI_BITMAP=y
-CONFIG_PPC_PAGE_SHIFT=12
-# CONFIG_PPC_PTDUMP is not set
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-CONFIG_PTE_64BIT=y
-# CONFIG_RAINIER is not set
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_REGULATOR=y
-CONFIG_RSEQ=y
-# CONFIG_SAM440EP is not set
-# CONFIG_SCOM_DEBUGFS is not set
-# CONFIG_SEQUOIA is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-# CONFIG_TAISHAN is not set
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_THREAD_SHIFT=13
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VDSO32=y
-# CONFIG_VIRTIO_MENU is not set
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
-# CONFIG_WARP is not set
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_XILINX_SYSACE is not set
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
-# CONFIG_YOSEMITE is not set
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/apm821xx/patches-5.10/100-dwc2-disable-powerdown.patch b/target/linux/apm821xx/patches-5.10/100-dwc2-disable-powerdown.patch
deleted file mode 100644
index ede7d732ff36..000000000000
--- a/target/linux/apm821xx/patches-5.10/100-dwc2-disable-powerdown.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 88ca61467a0897c79b1fbf8f5c30691b43b52613 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 26 Dec 2021 22:36:29 +0200
-Subject: [PATCH] dwc2: temporary force to be powered up all times
-
-the APM821xx's onchip dwc2 misbehaves with 5.4 and 5.10
-when a USB device gets connected. Instead of announcing
-and setting up the USB devices it crashes and burns with:
-
-[   22.023476] dwc2 4bff80000.usbotg: dwc2_restore_global_registers: no global registers to restore
-[   22.032245] dwc2 4bff80000.usbotg: dwc2_exit_partial_power_down: failed to restore registers
-[   22.040647] dwc2 4bff80000.usbotg: exit partial_power_down failed
-[   22.058765] dwc2 4bff80000.usbotg: HC died; cleaning up
-
-This is all seemingly fixed with dwc2 from a 5.16-rc6.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
-
---- a/drivers/usb/dwc2/params.c
-+++ b/drivers/usb/dwc2/params.c
-@@ -137,6 +137,7 @@ static void dwc2_set_amcc_params(struct
- 	struct dwc2_core_params *p = &hsotg->params;
- 
- 	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
-+	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
- }
- 
- static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg)
diff --git a/target/linux/apm821xx/patches-5.10/201-add-amcc-apollo3g-support.patch b/target/linux/apm821xx/patches-5.10/201-add-amcc-apollo3g-support.patch
deleted file mode 100644
index e1889540947e..000000000000
--- a/target/linux/apm821xx/patches-5.10/201-add-amcc-apollo3g-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -121,6 +121,17 @@ config CANYONLANDS
- 	help
- 	  This option enables support for the AMCC PPC460EX evaluation board.
- 
-+config APOLLO3G
-+	bool "Apollo3G"
-+	depends on 44x
-+	default n
-+	select PPC44x_SIMPLE
-+	select APM821xx
-+	select IBM_EMAC_RGMII
-+	select 460EX
-+	help
-+	  This option enables support for the AMCC Apollo 3G board.
-+
- config GLACIER
- 	bool "Glacier"
- 	depends on 44x
---- a/arch/powerpc/platforms/44x/ppc44x_simple.c
-+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
-@@ -47,6 +47,7 @@ machine_device_initcall(ppc44x_simple, p
-  * board.c file for it rather than adding it to this list.
-  */
- static char *board[] __initdata = {
-+	"amcc,apollo3g",
- 	"amcc,arches",
- 	"amcc,bamboo",
- 	"apm,bluestone",
diff --git a/target/linux/apm821xx/patches-5.10/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-5.10/300-fix-atheros-nics-on-apm82181.patch
deleted file mode 100644
index 110726d258ac..000000000000
--- a/target/linux/apm821xx/patches-5.10/300-fix-atheros-nics-on-apm82181.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/powerpc/platforms/4xx/pci.c
-+++ b/arch/powerpc/platforms/4xx/pci.c
-@@ -1060,15 +1060,24 @@ static int __init apm821xx_pciex_init_po
- 	u32 val;
- 
- 	/*
--	 * Do a software reset on PCIe ports.
--	 * This code is to fix the issue that pci drivers doesn't re-assign
--	 * bus number for PCIE devices after Uboot
--	 * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
--	 * PT quad port, SAS LSI 1064E)
-+	 * Only reset the PHY when no link is currently established.
-+	 * This is for the Atheros PCIe board which has problems to establish
-+	 * the link (again) after this PHY reset. All other currently tested
-+	 * PCIe boards don't show this problem.
- 	 */
--
--	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
--	mdelay(10);
-+	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+	if (!(val & 0x00001000)) {
-+		/*
-+		 * Do a software reset on PCIe ports.
-+		 * This code is to fix the issue that pci drivers doesn't re-assign
-+		 * bus number for PCIE devices after Uboot
-+		 * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
-+		 * PT quad port, SAS LSI 1064E)
-+		 */
-+
-+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
-+		mdelay(10);
-+	}
- 
- 	if (port->endpoint)
- 		val = PTYPE_LEGACY_ENDPOINT << 20;
-@@ -1085,9 +1094,12 @@ static int __init apm821xx_pciex_init_po
- 	mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
- 	mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
- 
--	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
--	mdelay(50);
--	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+	if (!(val & 0x00001000)) {
-+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
-+		mdelay(50);
-+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+	}
- 
- 	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- 		mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
diff --git a/target/linux/apm821xx/patches-5.10/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-5.10/301-fix-memory-map-wndr4700.patch
deleted file mode 100644
index 452d97e85aa0..000000000000
--- a/target/linux/apm821xx/patches-5.10/301-fix-memory-map-wndr4700.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/arch/powerpc/platforms/4xx/pci.c
-+++ b/arch/powerpc/platforms/4xx/pci.c
-@@ -1902,9 +1902,9 @@ static void __init ppc4xx_configure_pcie
- 		 * if it works
- 		 */
- 		out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
--		out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
-+		out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
- 		out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
--		out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
-+		out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
- 		out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
- 		out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
- 
diff --git a/target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch
deleted file mode 100644
index 754e9027698f..000000000000
--- a/target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Thu, 23 Jun 2016 20:28:20 +0200
-Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
- uPD720202
-
-The APM82181 does not support MSI-X. When probed, it will
-produce a noisy warning.
-
----
- drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 362 insertions(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -279,6 +279,7 @@ static void xhci_pci_quirks(struct devic
- 	    pdev->device == 0x0015) {
- 		xhci->quirks |= XHCI_RESET_ON_RESUME;
- 		xhci->quirks |= XHCI_ZERO_64B_REGS;
-+		xhci->quirks |= XHCI_FORCE_MSI;
- 	}
- 	if (pdev->vendor == PCI_VENDOR_ID_VIA)
- 		xhci->quirks |= XHCI_RESET_ON_RESUME;
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -431,10 +431,14 @@ static int xhci_try_enable_msi(struct us
- 		free_irq(hcd->irq, hcd);
- 	hcd->irq = 0;
- 
--	ret = xhci_setup_msix(xhci);
--	if (ret)
--		/* fall back to msi*/
-+	if (xhci->quirks & XHCI_FORCE_MSI) {
- 		ret = xhci_setup_msi(xhci);
-+	} else {
-+		ret = xhci_setup_msix(xhci);
-+		if (ret)
-+			/* fall back to msi*/
-+			ret = xhci_setup_msi(xhci);
-+	}
- 
- 	if (!ret) {
- 		hcd->msi_enabled = 1;
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1902,6 +1902,7 @@ struct xhci_hcd {
- 	struct xhci_hub		usb2_rhub;
- 	struct xhci_hub		usb3_rhub;
- 	/* support xHCI 1.0 spec USB2 hardware LPM */
-+#define XHCI_FORCE_MSI		(1 << 24)
- 	unsigned		hw_lpm_support:1;
- 	/* Broken Suspend flag for SNPS Suspend resume issue */
- 	unsigned		broken_suspend:1;
diff --git a/target/linux/apm821xx/patches-5.10/803-hwmon-tc654-add-detection-routine.patch b/target/linux/apm821xx/patches-5.10/803-hwmon-tc654-add-detection-routine.patch
deleted file mode 100644
index ad83ea2d8660..000000000000
--- a/target/linux/apm821xx/patches-5.10/803-hwmon-tc654-add-detection-routine.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 694f9bfb8efaef8a33e8992015ff9d0866faf4a2 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 17 Dec 2017 17:27:15 +0100
-Subject: [PATCH 1/2] hwmon: tc654 add detection routine
-
-This patch adds a detection routine for the TC654/TC655
-chips.  Both IDs are listed in the Datasheet.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/hwmon/tc654.c | 29 +++++++++++++++++++++++++++++
- 1 file changed, 29 insertions(+)
-
---- a/drivers/hwmon/tc654.c
-+++ b/drivers/hwmon/tc654.c
-@@ -55,6 +55,11 @@ enum tc654_regs {
- /* Register data is read (and cached) at most once per second. */
- #define TC654_UPDATE_INTERVAL		HZ
- 
-+/* Manufacturer and Version Identification Register Values */
-+#define TC654_MFR_ID_MICROCHIP		0x84
-+#define TC654_VER_ID			0x00
-+#define TC655_VER_ID			0x01
-+
- struct tc654_data {
- 	struct i2c_client *client;
- 
-@@ -481,6 +486,29 @@ static const struct i2c_device_id tc654_
- 	{}
- };
- 
-+static int
-+tc654_detect(struct i2c_client *new_client, struct i2c_board_info *info)
-+{
-+	struct i2c_adapter *adapter = new_client->adapter;
-+	int manufacturer, product;
-+
-+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-+		return -ENODEV;
-+
-+	manufacturer = i2c_smbus_read_byte_data(new_client, TC654_REG_MFR_ID);
-+	if (manufacturer != TC654_MFR_ID_MICROCHIP)
-+		return -ENODEV;
-+
-+	product = i2c_smbus_read_byte_data(new_client, TC654_REG_VER_ID);
-+	if (!((product == TC654_VER_ID) || (product == TC655_VER_ID)))
-+		return -ENODEV;
-+
-+	strlcpy(info->type, product == TC654_VER_ID ? "tc654" : "tc655",
-+		I2C_NAME_SIZE);
-+	return 0;
-+}
-+
-+
- MODULE_DEVICE_TABLE(i2c, tc654_id);
- 
- static struct i2c_driver tc654_driver = {
-@@ -489,6 +517,7 @@ static struct i2c_driver tc654_driver =
- 		   },
- 	.probe_new = tc654_probe,
- 	.id_table = tc654_id,
-+	.detect = tc654_detect,
- };
- 
- module_i2c_driver(tc654_driver);
diff --git a/target/linux/apm821xx/patches-5.10/804-hwmon-tc654-add-thermal_cooling-device.patch b/target/linux/apm821xx/patches-5.10/804-hwmon-tc654-add-thermal_cooling-device.patch
deleted file mode 100644
index 466507a8fb41..000000000000
--- a/target/linux/apm821xx/patches-5.10/804-hwmon-tc654-add-thermal_cooling-device.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-From 4d49367c5303e3ebd17502a45b74de280f6be539 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 13 Feb 2022 01:47:33 +0100
-Subject: hwmon: (tc654) Add thermal_cooling device support
-
-Adds thermal_cooling device support to the tc654/tc655
-driver. This make it possible to integrate it into a
-device-tree supported thermal-zone node as a
-cooling device.
-
-I have been using this patch as part of the Netgear WNDR4700
-Centria NAS Router support within OpenWrt since 2016.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Link: https://lore.kernel.org/r/20220213004733.2421193-1-chunkeey@gmail.com
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
----
---- a/drivers/hwmon/tc654.c
-+++ b/drivers/hwmon/tc654.c
-@@ -15,6 +15,7 @@
- #include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/slab.h>
-+#include <linux/thermal.h>
- #include <linux/util_macros.h>
- 
- enum tc654_regs {
-@@ -384,28 +385,20 @@ static ssize_t pwm_show(struct device *d
- 	return sprintf(buf, "%d\n", pwm);
- }
- 
--static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
--			 const char *buf, size_t count)
-+static int _set_pwm(struct tc654_data *data, unsigned long val)
- {
--	struct tc654_data *data = dev_get_drvdata(dev);
- 	struct i2c_client *client = data->client;
--	unsigned long val;
- 	int ret;
- 
--	if (kstrtoul(buf, 10, &val))
--		return -EINVAL;
--	if (val > 255)
--		return -EINVAL;
--
- 	mutex_lock(&data->update_lock);
- 
--	if (val == 0)
-+	if (val == 0) {
- 		data->config |= TC654_REG_CONFIG_SDM;
--	else
-+		data->duty_cycle = 0;
-+	} else {
- 		data->config &= ~TC654_REG_CONFIG_SDM;
--
--	data->duty_cycle = find_closest(val, tc654_pwm_map,
--					ARRAY_SIZE(tc654_pwm_map));
-+		data->duty_cycle = val - 1;
-+	}
- 
- 	ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);
- 	if (ret < 0)
-@@ -416,6 +409,24 @@ static ssize_t pwm_store(struct device *
- 
- out:
- 	mutex_unlock(&data->update_lock);
-+	return ret;
-+}
-+
-+static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
-+			 const char *buf, size_t count)
-+{
-+	struct tc654_data *data = dev_get_drvdata(dev);
-+	unsigned long val;
-+	int ret;
-+
-+	if (kstrtoul(buf, 10, &val))
-+		return -EINVAL;
-+	if (val > 255)
-+		return -EINVAL;
-+	if (val > 0)
-+		val = find_closest(val, tc654_pwm_map, ARRAY_SIZE(tc654_pwm_map)) + 1;
-+
-+	ret = _set_pwm(data, val);
- 	return ret < 0 ? ret : count;
- }
- 
-@@ -448,6 +459,58 @@ static struct attribute *tc654_attrs[] =
- ATTRIBUTE_GROUPS(tc654);
- 
- /*
-+ * thermal cooling device functions
-+ *
-+ * Account for the "ShutDown Mode (SDM)" state by offsetting
-+ * the 16 PWM duty cycle states by 1.
-+ *
-+ * State  0 =   0% PWM | Shutdown - Fan(s) are off
-+ * State  1 =  30% PWM | duty_cycle =  0
-+ * State  2 = ~35% PWM | duty_cycle =  1
-+ * [...]
-+ * State 15 = ~95% PWM | duty_cycle = 14
-+ * State 16 = 100% PWM | duty_cycle = 15
-+ */
-+#define TC654_MAX_COOLING_STATE	16
-+
-+static int tc654_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state)
-+{
-+	*state = TC654_MAX_COOLING_STATE;
-+	return 0;
-+}
-+
-+static int tc654_get_cur_state(struct thermal_cooling_device *cdev, unsigned long *state)
-+{
-+	struct tc654_data *data = tc654_update_client(cdev->devdata);
-+
-+	if (IS_ERR(data))
-+		return PTR_ERR(data);
-+
-+	if (data->config & TC654_REG_CONFIG_SDM)
-+		*state = 0;	/* FAN is off */
-+	else
-+		*state = data->duty_cycle + 1;	/* offset PWM States by 1 */
-+
-+	return 0;
-+}
-+
-+static int tc654_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
-+{
-+	struct tc654_data *data = tc654_update_client(cdev->devdata);
-+
-+	if (IS_ERR(data))
-+		return PTR_ERR(data);
-+
-+	return _set_pwm(data, clamp_val(state, 0, TC654_MAX_COOLING_STATE));
-+}
-+
-+static const struct thermal_cooling_device_ops tc654_fan_cool_ops = {
-+	.get_max_state = tc654_get_max_state,
-+	.get_cur_state = tc654_get_cur_state,
-+	.set_cur_state = tc654_set_cur_state,
-+};
-+
-+/*
-  * device probe and removal
-  */
- 
-@@ -477,7 +540,18 @@ static int tc654_probe(struct i2c_client
- 	hwmon_dev =
- 	    devm_hwmon_device_register_with_groups(dev, client->name, data,
- 						   tc654_groups);
--	return PTR_ERR_OR_ZERO(hwmon_dev);
-+	if (IS_ERR(hwmon_dev))
-+		return PTR_ERR(hwmon_dev);
-+
-+	if (IS_ENABLED(CONFIG_THERMAL)) {
-+		struct thermal_cooling_device *cdev;
-+
-+		cdev = devm_thermal_of_cooling_device_register(dev, dev->of_node, client->name,
-+							       hwmon_dev, &tc654_fan_cool_ops);
-+		return PTR_ERR_OR_ZERO(cdev);
-+	}
-+
-+	return 0;
- }
- 
- static const struct i2c_device_id tc654_id[] = {
diff --git a/target/linux/apm821xx/patches-5.10/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch b/target/linux/apm821xx/patches-5.10/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch
deleted file mode 100644
index 3d7cc39a6343..000000000000
--- a/target/linux/apm821xx/patches-5.10/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From c9395ad54e2cabb87d408becc37566f3d8248933 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 1 Dec 2019 02:08:23 +0100
-Subject: [PATCH] powerpc: bootwrapper: force gzip as mkimage's compression
- method
-
-Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to
-instruct the mkimage to use the xz compression, which isn't
-supported. This patch forces the gzip compression, which is
-supported and doesn't matter because the generated uImage for
-the apm821xx target gets ignored as the OpenWrt toolchain will
-do separate U-Boot kernel images for each device individually.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/powerpc/boot/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -251,7 +251,7 @@ compressor-$(CONFIG_KERNEL_LZO) := lzo
- 
- # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
- quiet_cmd_wrap	= WRAP    $@
--      cmd_wrap	=$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \
-+      cmd_wrap	=$(CONFIG_SHELL) $(wrapper) -Z gzip -c -o $@ -p $2 \
- 		$(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \
- 		vmlinux
- 
diff --git a/target/linux/archs38/config-5.10 b/target/linux/archs38/config-5.10
deleted file mode 100644
index 442f741328cf..000000000000
--- a/target/linux/archs38/config-5.10
+++ /dev/null
@@ -1,277 +0,0 @@
-# CONFIG_16KSTACKS is not set
-CONFIG_ARC=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y
-CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARC_BUILTIN_DTB_NAME=""
-CONFIG_ARC_CACHE=y
-CONFIG_ARC_CACHE_LINE_SHIFT=6
-CONFIG_ARC_CACHE_PAGES=y
-CONFIG_ARC_CPU_HS=y
-CONFIG_ARC_CURR_IN_REG=y
-CONFIG_ARC_DBG=y
-# CONFIG_ARC_DBG_TLB_PARANOIA is not set
-CONFIG_ARC_DW2_UNWIND=y
-CONFIG_ARC_HAS_ACCL_REGS=y
-CONFIG_ARC_HAS_DCACHE=y
-# CONFIG_ARC_HAS_DCCM is not set
-CONFIG_ARC_HAS_DIV_REM=y
-CONFIG_ARC_HAS_ICACHE=y
-# CONFIG_ARC_HAS_ICCM is not set
-CONFIG_ARC_HAS_LL64=y
-CONFIG_ARC_HAS_LLSC=y
-# CONFIG_ARC_HAS_PAE40 is not set
-CONFIG_ARC_HAS_SWAPE=y
-CONFIG_ARC_IRQ_NO_AUTOSAVE=y
-CONFIG_ARC_KVADDR_SIZE=256
-CONFIG_ARC_MCIP=y
-# CONFIG_ARC_METAWARE_HLINK is not set
-CONFIG_ARC_MMU_V4=y
-# CONFIG_ARC_PAGE_SIZE_16K is not set
-# CONFIG_ARC_PAGE_SIZE_4K is not set
-CONFIG_ARC_PAGE_SIZE_8K=y
-CONFIG_ARC_PLAT_AXS10X=y
-# CONFIG_ARC_PLAT_EZNPS is not set
-# CONFIG_ARC_PLAT_TB10X is not set
-# CONFIG_ARC_SMP_HALT_ON_RESET is not set
-CONFIG_ARC_SOC_HSDK=y
-CONFIG_ARC_TIMERS=y
-CONFIG_ARC_TIMERS_64BIT=y
-CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS=y
-CONFIG_AXS103=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED=y
-CONFIG_CC_HAS_KASAN_GENERIC=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_CLK_HSDK=y
-CONFIG_ARC_TUNE_MCPU=""
-CONFIG_ARC_DSP_NONE=y
-# CONFIG_ARC_FPU_SAVE_RESTORE is not set
-# CONFIG_ARC_DSP_KERNEL is not set
-# CONFIG_ARC_DSP_USERSPACE is not set
-# CONFIG_ARC_DSP_AGU_USERSPACE is not set
-# CONFIG_ARC_LPB_DISABLE is not set
-# CONFIG_SPI_DW_DMA is not set
-CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
-# CONFIG_HARDENED_USERCOPY is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DWMAC_ANARION=y
-CONFIG_DWMAC_GENERIC=y
-CONFIG_DW_APB_ICTL=y
-CONFIG_DW_AXI_DMAC=y
-CONFIG_EXT4_FS=y
-# CONFIG_EZNPS_GIC is not set
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIO_DWAPB=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_SNPS_CREG=y
-CONFIG_GRACE_PERIOD=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FUTEX_CMPXCHG=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PCI=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_IIO=y
-CONFIG_IIO_BUFFER=y
-CONFIG_IIO_KFIFO_BUF=y
-CONFIG_IIO_ST_PRESS=y
-CONFIG_IIO_ST_PRESS_I2C=y
-CONFIG_IIO_ST_PRESS_SPI=y
-CONFIG_IIO_ST_SENSORS_CORE=y
-CONFIG_IIO_ST_SENSORS_I2C=y
-CONFIG_IIO_ST_SENSORS_SPI=y
-CONFIG_IIO_TRIGGER=y
-CONFIG_IIO_TRIGGERED_BUFFER=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISA_ARCOMPACT is not set
-CONFIG_ISA_ARCV2=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KERNEL_GZIP=y
-CONFIG_LIBFDT=y
-CONFIG_LINUX_LINK_BASE=0x90000000
-CONFIG_LINUX_RAM_BASE=0x80000000
-CONFIG_LOCKD=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_DW=y
-# CONFIG_MMC_DW_BLUEFIELD is not set
-# CONFIG_MMC_DW_EXYNOS is not set
-# CONFIG_MMC_DW_HI3798CV200 is not set
-# CONFIG_MMC_DW_K3 is not set
-CONFIG_MMC_DW_PLTFM=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NAMESPACES=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_NS=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_IOPORT_MAP=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-CONFIG_PAGE_POOL=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PPS=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPTION=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_RESET_AXS10X=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_HSDK=y
-CONFIG_RESET_SIMPLE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_ARC=y
-CONFIG_SERIAL_ARC_CONSOLE=y
-CONFIG_SERIAL_ARC_NR_PORTS=1
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SOFTLOCKUP_DETECTOR=y
-CONFIG_SPI=y
-CONFIG_SPI_DESIGNWARE=y
-CONFIG_SPI_DW_MMIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-CONFIG_STACKTRACE=y
-# CONFIG_STANDALONE is not set
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STMMAC_SELFTESTS is not set
-CONFIG_SUNRPC=y
-CONFIG_SWPHY=y
-CONFIG_TASKS_RCU=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TI_ADC108S102=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USER_NS is not set
-CONFIG_VFAT_FS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
diff --git a/target/linux/armvirt/32/config-5.10 b/target/linux/armvirt/32/config-5.10
deleted file mode 100644
index 3c6443bcbf5e..000000000000
--- a/target/linux/armvirt/32/config-5.10
+++ /dev/null
@@ -1,75 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_VIRT=y
-CONFIG_ARM=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_CACHE_L2X0=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DMA_OPS=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HAVE_SMP=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_NEON=y
-CONFIG_NR_CPUS=4
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
diff --git a/target/linux/armvirt/64/config-5.10 b/target/linux/armvirt/64/config-5.10
deleted file mode 100644
index 275fe4571d29..000000000000
--- a/target/linux/armvirt/64/config-5.10
+++ /dev/null
@@ -1,154 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CNP=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_ERRATUM_1165522=y
-CONFIG_ARM64_ERRATUM_1286807=y
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_HW_AFDBM=y
-CONFIG_ARM64_MODULE_PLTS=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARM64_VHE=y
-CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
-CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_ARM_SBSA_WATCHDOG=y
-CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BLK_PM=y
-CONFIG_CAVIUM_TX2_ERRATUM_219=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CLK_SP810=y
-CONFIG_CLK_VEXPRESS_OSC=y
-# CONFIG_COMPAT_32BIT_TIME is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PM=y
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_BS=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
-CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CHACHA20=y
-CONFIG_CRYPTO_CHACHA20_NEON=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA256_ARM64=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_SHA512_ARM64=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DRM=y
-CONFIG_DRM_BOCHS=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_GEM_SHMEM_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_QXL=y
-CONFIG_DRM_TTM=y
-CONFIG_DRM_TTM_DMA_PAGE_POOL=y
-CONFIG_DRM_TTM_HELPER=y
-CONFIG_DRM_VIRTIO_GPU=y
-CONFIG_DRM_VRAM_HELPER=y
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FSL_ERRATUM_A008585=y
-CONFIG_FUJITSU_ERRATUM_010001=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_HDMI=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_ICST is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_KCMP=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MFD_VEXPRESS_SYSREG=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=64
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_SMC91X=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_VIDEOMODE_HELPERS=y
-CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
-CONFIG_VMAP_STACK=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/armvirt/config-5.10 b/target/linux/armvirt/config-5.10
deleted file mode 100644
index 9af7fe18ad17..000000000000
--- a/target/linux/armvirt/config-5.10
+++ /dev/null
@@ -1,155 +0,0 @@
-CONFIG_9P_FS=y
-# CONFIG_9P_FS_POSIX_ACL is not set
-# CONFIG_9P_FS_SECURITY is not set
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DTC=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-CONFIG_FAILOVER=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_PL061=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HVC_DRIVER=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_BALLOON=y
-CONFIG_MIGRATION=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_9P=y
-# CONFIG_NET_9P_DEBUG is not set
-CONFIG_NET_9P_VIRTIO=y
-CONFIG_NET_FAILOVER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-CONFIG_PAGE_REPORTING=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_ECAM=y
-CONFIG_PCI_HOST_COMMON=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_RATIONAL=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCSI=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-CONFIG_XPS=y
diff --git a/target/linux/at91/patches-5.10/101-ARM-at91-build-dtb-for-q5xr5.patch b/target/linux/at91/patches-5.10/101-ARM-at91-build-dtb-for-q5xr5.patch
deleted file mode 100644
index 2bf8ca52ec0b..000000000000
--- a/target/linux/at91/patches-5.10/101-ARM-at91-build-dtb-for-q5xr5.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -41,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- 	at91-kizboxmini-mb.dtb \
- 	at91-kizboxmini-rd.dtb \
- 	at91-smartkiz.dtb \
-+	at91-q5xr5.dtb \
- 	at91-wb45n.dtb \
- 	at91sam9g15ek.dtb \
- 	at91sam9g25-gardena-smart-gateway.dtb \
diff --git a/target/linux/at91/patches-5.10/102-dt-bindings-clock-at91-add-sama7g5-pll-defines.patch b/target/linux/at91/patches-5.10/102-dt-bindings-clock-at91-add-sama7g5-pll-defines.patch
deleted file mode 100644
index e684e5d4db20..000000000000
--- a/target/linux/at91/patches-5.10/102-dt-bindings-clock-at91-add-sama7g5-pll-defines.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 44bb7c72cdd830f54fe18e730205f892d9cbfe39 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Thu, 19 Nov 2020 17:43:08 +0200
-Subject: [PATCH 102/247] dt-bindings: clock: at91: add sama7g5 pll defines
-
-Add SAMA7G5 specific PLL defines to be referenced in a phandle as a
-PMC_TYPE_CORE clock.
-
-Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-[claudiu.beznea@microchip.com: adapt comit message, adapt sama7g5.c]
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605800597-16720-3-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/sama7g5.c       |  6 +++---
- include/dt-bindings/clock/at91.h | 10 ++++++++++
- 2 files changed, 13 insertions(+), 3 deletions(-)
-
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -182,13 +182,13 @@ static const struct {
- 		  .p = "audiopll_fracck",
- 		  .l = &pll_layout_divpmc,
- 		  .t = PLL_TYPE_DIV,
--		  .eid = PMC_I2S0_MUX, },
-+		  .eid = PMC_AUDIOPMCPLL, },
- 
- 		{ .n = "audiopll_diviock",
- 		  .p = "audiopll_fracck",
- 		  .l = &pll_layout_divio,
- 		  .t = PLL_TYPE_DIV,
--		  .eid = PMC_I2S1_MUX, },
-+		  .eid = PMC_AUDIOIOPLL, },
- 	},
- 
- 	[PLL_ID_ETH] = {
-@@ -835,7 +835,7 @@ static void __init sama7g5_pmc_setup(str
- 	if (IS_ERR(regmap))
- 		return;
- 
--	sama7g5_pmc = pmc_data_allocate(PMC_I2S1_MUX + 1,
-+	sama7g5_pmc = pmc_data_allocate(PMC_ETHPLL + 1,
- 					nck(sama7g5_systemck),
- 					nck(sama7g5_periphck),
- 					nck(sama7g5_gck), 8);
---- a/include/dt-bindings/clock/at91.h
-+++ b/include/dt-bindings/clock/at91.h
-@@ -25,6 +25,16 @@
- #define PMC_PLLBCK		8
- #define PMC_AUDIOPLLCK		9
- 
-+/* SAMA7G5 */
-+#define PMC_CPUPLL		(PMC_MAIN + 1)
-+#define PMC_SYSPLL		(PMC_MAIN + 2)
-+#define PMC_DDRPLL		(PMC_MAIN + 3)
-+#define PMC_IMGPLL		(PMC_MAIN + 4)
-+#define PMC_BAUDPLL		(PMC_MAIN + 5)
-+#define PMC_AUDIOPMCPLL		(PMC_MAIN + 6)
-+#define PMC_AUDIOIOPLL		(PMC_MAIN + 7)
-+#define PMC_ETHPLL		(PMC_MAIN + 8)
-+
- #ifndef AT91_PMC_MOSCS
- #define AT91_PMC_MOSCS		0		/* MOSCS Flag */
- #define AT91_PMC_LOCKA		1		/* PLLA Lock */
diff --git a/target/linux/at91/patches-5.10/103-clk-at91-sama7g5-allow-SYS-and-CPU-PLLs-to-be-export.patch b/target/linux/at91/patches-5.10/103-clk-at91-sama7g5-allow-SYS-and-CPU-PLLs-to-be-export.patch
deleted file mode 100644
index cd50dee6e181..000000000000
--- a/target/linux/at91/patches-5.10/103-clk-at91-sama7g5-allow-SYS-and-CPU-PLLs-to-be-export.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 55c14526f970805a6bf2ed4b820f062334375abe Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Thu, 19 Nov 2020 17:43:09 +0200
-Subject: [PATCH 103/247] clk: at91: sama7g5: allow SYS and CPU PLLs to be
- exported and referenced in DT
-
-Allow SYSPLL and CPUPLL to be referenced as a PMC_TYPE_CORE clock
-from phandle in DT.
-
-Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-[claudiu.beznea@microchip.com: adapt commit message, add CPU PLL]
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605800597-16720-4-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/sama7g5.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -117,7 +117,8 @@ static const struct {
- 		  .p = "cpupll_fracck",
- 		  .l = &pll_layout_divpmc,
- 		  .t = PLL_TYPE_DIV,
--		  .c = 1, },
-+		  .c = 1,
-+		  .eid = PMC_CPUPLL, },
- 	},
- 
- 	[PLL_ID_SYS] = {
-@@ -131,7 +132,8 @@ static const struct {
- 		  .p = "syspll_fracck",
- 		  .l = &pll_layout_divpmc,
- 		  .t = PLL_TYPE_DIV,
--		  .c = 1, },
-+		  .c = 1,
-+		  .eid = PMC_SYSPLL, },
- 	},
- 
- 	[PLL_ID_DDR] = {
diff --git a/target/linux/at91/patches-5.10/104-clk-at91-clk-master-add-5th-divisor-for-mck-master.patch b/target/linux/at91/patches-5.10/104-clk-at91-clk-master-add-5th-divisor-for-mck-master.patch
deleted file mode 100644
index 9feea8249034..000000000000
--- a/target/linux/at91/patches-5.10/104-clk-at91-clk-master-add-5th-divisor-for-mck-master.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From b2349278894bb381fa26a8717d3093d53f08fd36 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Thu, 19 Nov 2020 17:43:10 +0200
-Subject: [PATCH 104/247] clk: at91: clk-master: add 5th divisor for mck master
-
-clk-master can have 5 divisors with a field width of 3 bits
-on some products.
-
-Change the mask and number of divisors accordingly.
-
-Reported-by: Mihai Sain <mihai.sain@microchip.com>
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605800597-16720-5-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/clk-master.c | 2 +-
- drivers/clk/at91/pmc.h        | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/at91/clk-master.c
-+++ b/drivers/clk/at91/clk-master.c
-@@ -15,7 +15,7 @@
- #define MASTER_PRES_MASK	0x7
- #define MASTER_PRES_MAX		MASTER_PRES_MASK
- #define MASTER_DIV_SHIFT	8
--#define MASTER_DIV_MASK		0x3
-+#define MASTER_DIV_MASK		0x7
- 
- #define PMC_MCR			0x30
- #define PMC_MCR_ID_MSK		GENMASK(3, 0)
---- a/drivers/clk/at91/pmc.h
-+++ b/drivers/clk/at91/pmc.h
-@@ -48,7 +48,7 @@ extern const struct clk_master_layout at
- 
- struct clk_master_characteristics {
- 	struct clk_range output;
--	u32 divisors[4];
-+	u32 divisors[5];
- 	u8 have_div3_pres;
- };
- 
diff --git a/target/linux/at91/patches-5.10/105-clk-at91-sama7g5-add-5th-divisor-for-mck0-layout-and.patch b/target/linux/at91/patches-5.10/105-clk-at91-sama7g5-add-5th-divisor-for-mck0-layout-and.patch
deleted file mode 100644
index 55e7f913c254..000000000000
--- a/target/linux/at91/patches-5.10/105-clk-at91-sama7g5-add-5th-divisor-for-mck0-layout-and.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From c41f013e13962dcc78239d5e4834214d44556cfb Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Thu, 19 Nov 2020 17:43:11 +0200
-Subject: [PATCH 105/247] clk: at91: sama7g5: add 5th divisor for mck0 layout
- and characteristics
-
-This SoC has the 5th divisor for the mck0 master clock.
-Adapt the characteristics accordingly.
-
-Reported-by: Mihai Sain <mihai.sain@microchip.com>
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605800597-16720-6-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/sama7g5.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -775,13 +775,13 @@ static const struct clk_pll_characterist
- /* MCK0 characteristics. */
- static const struct clk_master_characteristics mck0_characteristics = {
- 	.output = { .min = 140000000, .max = 200000000 },
--	.divisors = { 1, 2, 4, 3 },
-+	.divisors = { 1, 2, 4, 3, 5 },
- 	.have_div3_pres = 1,
- };
- 
- /* MCK0 layout. */
- static const struct clk_master_layout mck0_layout = {
--	.mask = 0x373,
-+	.mask = 0x773,
- 	.pres_shift = 4,
- 	.offset = 0x28,
- };
diff --git a/target/linux/at91/patches-5.10/106-clk-at91-clk-sam9x60-pll-allow-runtime-changes-for-p.patch b/target/linux/at91/patches-5.10/106-clk-at91-clk-sam9x60-pll-allow-runtime-changes-for-p.patch
deleted file mode 100644
index fa76cbb5a39e..000000000000
--- a/target/linux/at91/patches-5.10/106-clk-at91-clk-sam9x60-pll-allow-runtime-changes-for-p.patch
+++ /dev/null
@@ -1,510 +0,0 @@
-From 6fe2927863de96edf35d8357712dbf83a489f556 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 19 Nov 2020 17:43:12 +0200
-Subject: [PATCH 106/247] clk: at91: clk-sam9x60-pll: allow runtime changes for
- pll
-
-Allow runtime frequency changes for PLLs registered with proper flags.
-This is necessary for CPU PLL on SAMA7G5 which is used by DVFS.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605800597-16720-7-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/clk-sam9x60-pll.c | 145 +++++++++++++++++++++++++----
- drivers/clk/at91/pmc.h             |   4 +-
- drivers/clk/at91/sam9x60.c         |  22 ++++-
- drivers/clk/at91/sama7g5.c         |  67 +++++++++----
- 4 files changed, 197 insertions(+), 41 deletions(-)
-
---- a/drivers/clk/at91/clk-sam9x60-pll.c
-+++ b/drivers/clk/at91/clk-sam9x60-pll.c
-@@ -229,6 +229,57 @@ static int sam9x60_frac_pll_set_rate(str
- 	return sam9x60_frac_pll_compute_mul_frac(core, rate, parent_rate, true);
- }
- 
-+static int sam9x60_frac_pll_set_rate_chg(struct clk_hw *hw, unsigned long rate,
-+					 unsigned long parent_rate)
-+{
-+	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
-+	struct sam9x60_frac *frac = to_sam9x60_frac(core);
-+	struct regmap *regmap = core->regmap;
-+	unsigned long irqflags;
-+	unsigned int val, cfrac, cmul;
-+	long ret;
-+
-+	ret = sam9x60_frac_pll_compute_mul_frac(core, rate, parent_rate, true);
-+	if (ret <= 0)
-+		return ret;
-+
-+	spin_lock_irqsave(core->lock, irqflags);
-+
-+	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK,
-+			   core->id);
-+	regmap_read(regmap, AT91_PMC_PLL_CTRL1, &val);
-+	cmul = (val & core->layout->mul_mask) >> core->layout->mul_shift;
-+	cfrac = (val & core->layout->frac_mask) >> core->layout->frac_shift;
-+
-+	if (cmul == frac->mul && cfrac == frac->frac)
-+		goto unlock;
-+
-+	regmap_write(regmap, AT91_PMC_PLL_CTRL1,
-+		     (frac->mul << core->layout->mul_shift) |
-+		     (frac->frac << core->layout->frac_shift));
-+
-+	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
-+			   AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
-+			   AT91_PMC_PLL_UPDT_UPDATE | core->id);
-+
-+	regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
-+			   AT91_PMC_PLL_CTRL0_ENLOCK | AT91_PMC_PLL_CTRL0_ENPLL,
-+			   AT91_PMC_PLL_CTRL0_ENLOCK |
-+			   AT91_PMC_PLL_CTRL0_ENPLL);
-+
-+	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
-+			   AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
-+			   AT91_PMC_PLL_UPDT_UPDATE | core->id);
-+
-+	while (!sam9x60_pll_ready(regmap, core->id))
-+		cpu_relax();
-+
-+unlock:
-+	spin_unlock_irqrestore(core->lock, irqflags);
-+
-+	return ret;
-+}
-+
- static const struct clk_ops sam9x60_frac_pll_ops = {
- 	.prepare = sam9x60_frac_pll_prepare,
- 	.unprepare = sam9x60_frac_pll_unprepare,
-@@ -238,6 +289,15 @@ static const struct clk_ops sam9x60_frac
- 	.set_rate = sam9x60_frac_pll_set_rate,
- };
- 
-+static const struct clk_ops sam9x60_frac_pll_ops_chg = {
-+	.prepare = sam9x60_frac_pll_prepare,
-+	.unprepare = sam9x60_frac_pll_unprepare,
-+	.is_prepared = sam9x60_frac_pll_is_prepared,
-+	.recalc_rate = sam9x60_frac_pll_recalc_rate,
-+	.round_rate = sam9x60_frac_pll_round_rate,
-+	.set_rate = sam9x60_frac_pll_set_rate_chg,
-+};
-+
- static int sam9x60_div_pll_prepare(struct clk_hw *hw)
- {
- 	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
-@@ -384,6 +444,44 @@ static int sam9x60_div_pll_set_rate(stru
- 	return 0;
- }
- 
-+static int sam9x60_div_pll_set_rate_chg(struct clk_hw *hw, unsigned long rate,
-+					unsigned long parent_rate)
-+{
-+	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
-+	struct sam9x60_div *div = to_sam9x60_div(core);
-+	struct regmap *regmap = core->regmap;
-+	unsigned long irqflags;
-+	unsigned int val, cdiv;
-+
-+	div->div = DIV_ROUND_CLOSEST(parent_rate, rate) - 1;
-+
-+	spin_lock_irqsave(core->lock, irqflags);
-+	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK,
-+			   core->id);
-+	regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
-+	cdiv = (val & core->layout->div_mask) >> core->layout->div_shift;
-+
-+	/* Stop if nothing changed. */
-+	if (cdiv == div->div)
-+		goto unlock;
-+
-+	regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
-+			   core->layout->div_mask,
-+			   (div->div << core->layout->div_shift));
-+
-+	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
-+			   AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
-+			   AT91_PMC_PLL_UPDT_UPDATE | core->id);
-+
-+	while (!sam9x60_pll_ready(regmap, core->id))
-+		cpu_relax();
-+
-+unlock:
-+	spin_unlock_irqrestore(core->lock, irqflags);
-+
-+	return 0;
-+}
-+
- static const struct clk_ops sam9x60_div_pll_ops = {
- 	.prepare = sam9x60_div_pll_prepare,
- 	.unprepare = sam9x60_div_pll_unprepare,
-@@ -393,17 +491,26 @@ static const struct clk_ops sam9x60_div_
- 	.set_rate = sam9x60_div_pll_set_rate,
- };
- 
-+static const struct clk_ops sam9x60_div_pll_ops_chg = {
-+	.prepare = sam9x60_div_pll_prepare,
-+	.unprepare = sam9x60_div_pll_unprepare,
-+	.is_prepared = sam9x60_div_pll_is_prepared,
-+	.recalc_rate = sam9x60_div_pll_recalc_rate,
-+	.round_rate = sam9x60_div_pll_round_rate,
-+	.set_rate = sam9x60_div_pll_set_rate_chg,
-+};
-+
- struct clk_hw * __init
- sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
- 			      const char *name, const char *parent_name,
- 			      struct clk_hw *parent_hw, u8 id,
- 			      const struct clk_pll_characteristics *characteristics,
--			      const struct clk_pll_layout *layout, bool critical)
-+			      const struct clk_pll_layout *layout, u32 flags)
- {
- 	struct sam9x60_frac *frac;
- 	struct clk_hw *hw;
- 	struct clk_init_data init;
--	unsigned long parent_rate, flags;
-+	unsigned long parent_rate, irqflags;
- 	unsigned int val;
- 	int ret;
- 
-@@ -417,10 +524,12 @@ sam9x60_clk_register_frac_pll(struct reg
- 	init.name = name;
- 	init.parent_names = &parent_name;
- 	init.num_parents = 1;
--	init.ops = &sam9x60_frac_pll_ops;
--	init.flags = CLK_SET_RATE_GATE;
--	if (critical)
--		init.flags |= CLK_IS_CRITICAL;
-+	if (flags & CLK_SET_RATE_GATE)
-+		init.ops = &sam9x60_frac_pll_ops;
-+	else
-+		init.ops = &sam9x60_frac_pll_ops_chg;
-+
-+	init.flags = flags;
- 
- 	frac->core.id = id;
- 	frac->core.hw.init = &init;
-@@ -429,7 +538,7 @@ sam9x60_clk_register_frac_pll(struct reg
- 	frac->core.regmap = regmap;
- 	frac->core.lock = lock;
- 
--	spin_lock_irqsave(frac->core.lock, flags);
-+	spin_lock_irqsave(frac->core.lock, irqflags);
- 	if (sam9x60_pll_ready(regmap, id)) {
- 		regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
- 				   AT91_PMC_PLL_UPDT_ID_MSK, id);
-@@ -457,7 +566,7 @@ sam9x60_clk_register_frac_pll(struct reg
- 			goto free;
- 		}
- 	}
--	spin_unlock_irqrestore(frac->core.lock, flags);
-+	spin_unlock_irqrestore(frac->core.lock, irqflags);
- 
- 	hw = &frac->core.hw;
- 	ret = clk_hw_register(NULL, hw);
-@@ -469,7 +578,7 @@ sam9x60_clk_register_frac_pll(struct reg
- 	return hw;
- 
- free:
--	spin_unlock_irqrestore(frac->core.lock, flags);
-+	spin_unlock_irqrestore(frac->core.lock, irqflags);
- 	kfree(frac);
- 	return hw;
- }
-@@ -478,12 +587,12 @@ struct clk_hw * __init
- sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
- 			     const char *name, const char *parent_name, u8 id,
- 			     const struct clk_pll_characteristics *characteristics,
--			     const struct clk_pll_layout *layout, bool critical)
-+			     const struct clk_pll_layout *layout, u32 flags)
- {
- 	struct sam9x60_div *div;
- 	struct clk_hw *hw;
- 	struct clk_init_data init;
--	unsigned long flags;
-+	unsigned long irqflags;
- 	unsigned int val;
- 	int ret;
- 
-@@ -497,11 +606,11 @@ sam9x60_clk_register_div_pll(struct regm
- 	init.name = name;
- 	init.parent_names = &parent_name;
- 	init.num_parents = 1;
--	init.ops = &sam9x60_div_pll_ops;
--	init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
--		     CLK_SET_RATE_PARENT;
--	if (critical)
--		init.flags |= CLK_IS_CRITICAL;
-+	if (flags & CLK_SET_RATE_GATE)
-+		init.ops = &sam9x60_div_pll_ops;
-+	else
-+		init.ops = &sam9x60_div_pll_ops_chg;
-+	init.flags = flags;
- 
- 	div->core.id = id;
- 	div->core.hw.init = &init;
-@@ -510,14 +619,14 @@ sam9x60_clk_register_div_pll(struct regm
- 	div->core.regmap = regmap;
- 	div->core.lock = lock;
- 
--	spin_lock_irqsave(div->core.lock, flags);
-+	spin_lock_irqsave(div->core.lock, irqflags);
- 
- 	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
- 			   AT91_PMC_PLL_UPDT_ID_MSK, id);
- 	regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
- 	div->div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, val);
- 
--	spin_unlock_irqrestore(div->core.lock, flags);
-+	spin_unlock_irqrestore(div->core.lock, irqflags);
- 
- 	hw = &div->core.hw;
- 	ret = clk_hw_register(NULL, hw);
---- a/drivers/clk/at91/pmc.h
-+++ b/drivers/clk/at91/pmc.h
-@@ -190,14 +190,14 @@ struct clk_hw * __init
- sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
- 			     const char *name, const char *parent_name, u8 id,
- 			     const struct clk_pll_characteristics *characteristics,
--			     const struct clk_pll_layout *layout, bool critical);
-+			     const struct clk_pll_layout *layout, u32 flags);
- 
- struct clk_hw * __init
- sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
- 			      const char *name, const char *parent_name,
- 			      struct clk_hw *parent_hw, u8 id,
- 			      const struct clk_pll_characteristics *characteristics,
--			      const struct clk_pll_layout *layout, bool critical);
-+			      const struct clk_pll_layout *layout, u32 flags);
- 
- struct clk_hw * __init
- at91_clk_register_programmable(struct regmap *regmap, const char *name,
---- a/drivers/clk/at91/sam9x60.c
-+++ b/drivers/clk/at91/sam9x60.c
-@@ -224,13 +224,24 @@ static void __init sam9x60_pmc_setup(str
- 	hw = sam9x60_clk_register_frac_pll(regmap, &pmc_pll_lock, "pllack_fracck",
- 					   "mainck", sam9x60_pmc->chws[PMC_MAIN],
- 					   0, &plla_characteristics,
--					   &pll_frac_layout, true);
-+					   &pll_frac_layout,
-+					   /*
-+					    * This feeds pllack_divck which
-+					    * feeds CPU. It should not be
-+					    * disabled.
-+					    */
-+					   CLK_IS_CRITICAL | CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
- 	hw = sam9x60_clk_register_div_pll(regmap, &pmc_pll_lock, "pllack_divck",
- 					  "pllack_fracck", 0, &plla_characteristics,
--					  &pll_div_layout, true);
-+					  &pll_div_layout,
-+					   /*
-+					    * This feeds CPU. It should not
-+					    * be disabled.
-+					    */
-+					  CLK_IS_CRITICAL | CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -239,13 +250,16 @@ static void __init sam9x60_pmc_setup(str
- 	hw = sam9x60_clk_register_frac_pll(regmap, &pmc_pll_lock, "upllck_fracck",
- 					   "main_osc", main_osc_hw, 1,
- 					   &upll_characteristics,
--					   &pll_frac_layout, false);
-+					   &pll_frac_layout, CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
- 	hw = sam9x60_clk_register_div_pll(regmap, &pmc_pll_lock, "upllck_divck",
- 					  "upllck_fracck", 1, &upll_characteristics,
--					  &pll_div_layout, false);
-+					  &pll_div_layout,
-+					  CLK_SET_RATE_GATE |
-+					  CLK_SET_PARENT_GATE |
-+					  CLK_SET_RATE_PARENT);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -95,15 +95,15 @@ static const struct clk_pll_layout pll_l
-  * @p:		clock parent
-  * @l:		clock layout
-  * @t:		clock type
-- * @f:		true if clock is critical and cannot be disabled
-+ * @f:		clock flags
-  * @eid:	export index in sama7g5->chws[] array
-  */
- static const struct {
- 	const char *n;
- 	const char *p;
- 	const struct clk_pll_layout *l;
-+	unsigned long f;
- 	u8 t;
--	u8 c;
- 	u8 eid;
- } sama7g5_plls[][PLL_ID_MAX] = {
- 	[PLL_ID_CPU] = {
-@@ -111,13 +111,18 @@ static const struct {
- 		  .p = "mainck",
- 		  .l = &pll_layout_frac,
- 		  .t = PLL_TYPE_FRAC,
--		  .c = 1, },
-+		   /*
-+		    * This feeds cpupll_divpmcck which feeds CPU. It should
-+		    * not be disabled.
-+		    */
-+		  .f = CLK_IS_CRITICAL, },
- 
- 		{ .n = "cpupll_divpmcck",
- 		  .p = "cpupll_fracck",
- 		  .l = &pll_layout_divpmc,
- 		  .t = PLL_TYPE_DIV,
--		  .c = 1,
-+		   /* This feeds CPU. It should not be disabled. */
-+		  .f = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
- 		  .eid = PMC_CPUPLL, },
- 	},
- 
-@@ -126,13 +131,22 @@ static const struct {
- 		  .p = "mainck",
- 		  .l = &pll_layout_frac,
- 		  .t = PLL_TYPE_FRAC,
--		  .c = 1, },
-+		   /*
-+		    * This feeds syspll_divpmcck which may feed critial parts
-+		    * of the systems like timers. Therefore it should not be
-+		    * disabled.
-+		    */
-+		  .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, },
- 
- 		{ .n = "syspll_divpmcck",
- 		  .p = "syspll_fracck",
- 		  .l = &pll_layout_divpmc,
- 		  .t = PLL_TYPE_DIV,
--		  .c = 1,
-+		   /*
-+		    * This may feed critial parts of the systems like timers.
-+		    * Therefore it should not be disabled.
-+		    */
-+		  .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE,
- 		  .eid = PMC_SYSPLL, },
- 	},
- 
-@@ -141,55 +155,71 @@ static const struct {
- 		  .p = "mainck",
- 		  .l = &pll_layout_frac,
- 		  .t = PLL_TYPE_FRAC,
--		  .c = 1, },
-+		   /*
-+		    * This feeds ddrpll_divpmcck which feeds DDR. It should not
-+		    * be disabled.
-+		    */
-+		  .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, },
- 
- 		{ .n = "ddrpll_divpmcck",
- 		  .p = "ddrpll_fracck",
- 		  .l = &pll_layout_divpmc,
- 		  .t = PLL_TYPE_DIV,
--		  .c = 1, },
-+		   /* This feeds DDR. It should not be disabled. */
-+		  .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, },
- 	},
- 
- 	[PLL_ID_IMG] = {
- 		{ .n = "imgpll_fracck",
- 		  .p = "mainck",
- 		  .l = &pll_layout_frac,
--		  .t = PLL_TYPE_FRAC, },
-+		  .t = PLL_TYPE_FRAC,
-+		  .f = CLK_SET_RATE_GATE, },
- 
- 		{ .n = "imgpll_divpmcck",
- 		  .p = "imgpll_fracck",
- 		  .l = &pll_layout_divpmc,
--		  .t = PLL_TYPE_DIV, },
-+		  .t = PLL_TYPE_DIV,
-+		  .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
-+		       CLK_SET_RATE_PARENT, },
- 	},
- 
- 	[PLL_ID_BAUD] = {
- 		{ .n = "baudpll_fracck",
- 		  .p = "mainck",
- 		  .l = &pll_layout_frac,
--		  .t = PLL_TYPE_FRAC, },
-+		  .t = PLL_TYPE_FRAC,
-+		  .f = CLK_SET_RATE_GATE, },
- 
- 		{ .n = "baudpll_divpmcck",
- 		  .p = "baudpll_fracck",
- 		  .l = &pll_layout_divpmc,
--		  .t = PLL_TYPE_DIV, },
-+		  .t = PLL_TYPE_DIV,
-+		  .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
-+		       CLK_SET_RATE_PARENT, },
- 	},
- 
- 	[PLL_ID_AUDIO] = {
- 		{ .n = "audiopll_fracck",
- 		  .p = "main_xtal",
- 		  .l = &pll_layout_frac,
--		  .t = PLL_TYPE_FRAC, },
-+		  .t = PLL_TYPE_FRAC,
-+		  .f = CLK_SET_RATE_GATE, },
- 
- 		{ .n = "audiopll_divpmcck",
- 		  .p = "audiopll_fracck",
- 		  .l = &pll_layout_divpmc,
- 		  .t = PLL_TYPE_DIV,
-+		  .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
-+		       CLK_SET_RATE_PARENT,
- 		  .eid = PMC_AUDIOPMCPLL, },
- 
- 		{ .n = "audiopll_diviock",
- 		  .p = "audiopll_fracck",
- 		  .l = &pll_layout_divio,
- 		  .t = PLL_TYPE_DIV,
-+		  .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
-+		       CLK_SET_RATE_PARENT,
- 		  .eid = PMC_AUDIOIOPLL, },
- 	},
- 
-@@ -197,12 +227,15 @@ static const struct {
- 		{ .n = "ethpll_fracck",
- 		  .p = "main_xtal",
- 		  .l = &pll_layout_frac,
--		  .t = PLL_TYPE_FRAC, },
-+		  .t = PLL_TYPE_FRAC,
-+		  .f = CLK_SET_RATE_GATE, },
- 
- 		{ .n = "ethpll_divpmcck",
- 		  .p = "ethpll_fracck",
- 		  .l = &pll_layout_divpmc,
--		  .t = PLL_TYPE_DIV, },
-+		  .t = PLL_TYPE_DIV,
-+		  .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
-+		       CLK_SET_RATE_PARENT, },
- 	},
- };
- 
-@@ -890,7 +923,7 @@ static void __init sama7g5_pmc_setup(str
- 					sama7g5_plls[i][j].p, parent_hw, i,
- 					&pll_characteristics,
- 					sama7g5_plls[i][j].l,
--					sama7g5_plls[i][j].c);
-+					sama7g5_plls[i][j].f);
- 				break;
- 
- 			case PLL_TYPE_DIV:
-@@ -899,7 +932,7 @@ static void __init sama7g5_pmc_setup(str
- 					sama7g5_plls[i][j].p, i,
- 					&pll_characteristics,
- 					sama7g5_plls[i][j].l,
--					sama7g5_plls[i][j].c);
-+					sama7g5_plls[i][j].f);
- 				break;
- 
- 			default:
diff --git a/target/linux/at91/patches-5.10/107-clk-at91-sama7g5-remove-mck0-from-parent-list-of-oth.patch b/target/linux/at91/patches-5.10/107-clk-at91-sama7g5-remove-mck0-from-parent-list-of-oth.patch
deleted file mode 100644
index 209c40cf2f7b..000000000000
--- a/target/linux/at91/patches-5.10/107-clk-at91-sama7g5-remove-mck0-from-parent-list-of-oth.patch
+++ /dev/null
@@ -1,196 +0,0 @@
-From 7cfe2dfe5ac7c72b904e4b59b240caa42721ee07 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 19 Nov 2020 17:43:13 +0200
-Subject: [PATCH 107/247] clk: at91: sama7g5: remove mck0 from parent list of
- other clocks
-
-MCK0 is changed at runtime by DVFS. Due to this, since not all IPs
-are glitch free aware at MCK0 changes, remove MCK0 from parent list
-of other clocks (e.g. generic clock, programmable/system clock, MCKX).
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605800597-16720-8-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/sama7g5.c | 55 ++++++++++++++++++--------------------
- 1 file changed, 26 insertions(+), 29 deletions(-)
-
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -280,7 +280,7 @@ static const struct {
- 	  .ep = { "syspll_divpmcck", "ddrpll_divpmcck", "imgpll_divpmcck", },
- 	  .ep_mux_table = { 5, 6, 7, },
- 	  .ep_count = 3,
--	  .ep_chg_id = 6, },
-+	  .ep_chg_id = 5, },
- 
- 	{ .n = "mck4",
- 	  .id = 4,
-@@ -313,7 +313,7 @@ static const struct {
- };
- 
- /* Mux table for programmable clocks. */
--static u32 sama7g5_prog_mux_table[] = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, };
-+static u32 sama7g5_prog_mux_table[] = { 0, 1, 2, 5, 6, 7, 8, 9, 10, };
- 
- /**
-  * Peripheral clock description
-@@ -436,7 +436,7 @@ static const struct {
- 	  .pp = { "audiopll_divpmcck", },
- 	  .pp_mux_table = { 9, },
- 	  .pp_count = 1,
--	  .pp_chg_id = 4, },
-+	  .pp_chg_id = 3, },
- 
- 	{ .n  = "csi_gclk",
- 	  .id = 33,
-@@ -548,7 +548,7 @@ static const struct {
- 	  .pp = { "ethpll_divpmcck", },
- 	  .pp_mux_table = { 10, },
- 	  .pp_count = 1,
--	  .pp_chg_id = 4, },
-+	  .pp_chg_id = 3, },
- 
- 	{ .n  = "gmac1_gclk",
- 	  .id = 52,
-@@ -580,7 +580,7 @@ static const struct {
- 	  .pp = { "syspll_divpmcck", "audiopll_divpmcck", },
- 	  .pp_mux_table = { 5, 9, },
- 	  .pp_count = 2,
--	  .pp_chg_id = 5, },
-+	  .pp_chg_id = 4, },
- 
- 	{ .n  = "i2smcc1_gclk",
- 	  .id = 58,
-@@ -588,7 +588,7 @@ static const struct {
- 	  .pp = { "syspll_divpmcck", "audiopll_divpmcck", },
- 	  .pp_mux_table = { 5, 9, },
- 	  .pp_count = 2,
--	  .pp_chg_id = 5, },
-+	  .pp_chg_id = 4, },
- 
- 	{ .n  = "mcan0_gclk",
- 	  .id = 61,
-@@ -730,7 +730,7 @@ static const struct {
- 	  .pp = { "syspll_divpmcck", "baudpll_divpmcck", },
- 	  .pp_mux_table = { 5, 8, },
- 	  .pp_count = 2,
--	  .pp_chg_id = 5, },
-+	  .pp_chg_id = 4, },
- 
- 	{ .n  = "sdmmc1_gclk",
- 	  .id = 81,
-@@ -738,7 +738,7 @@ static const struct {
- 	  .pp = { "syspll_divpmcck", "baudpll_divpmcck", },
- 	  .pp_mux_table = { 5, 8, },
- 	  .pp_count = 2,
--	  .pp_chg_id = 5, },
-+	  .pp_chg_id = 4, },
- 
- 	{ .n  = "sdmmc2_gclk",
- 	  .id = 82,
-@@ -746,7 +746,7 @@ static const struct {
- 	  .pp = { "syspll_divpmcck", "baudpll_divpmcck", },
- 	  .pp_mux_table = { 5, 8, },
- 	  .pp_count = 2,
--	  .pp_chg_id = 5, },
-+	  .pp_chg_id = 4, },
- 
- 	{ .n  = "spdifrx_gclk",
- 	  .id = 84,
-@@ -754,7 +754,7 @@ static const struct {
- 	  .pp = { "syspll_divpmcck", "audiopll_divpmcck", },
- 	  .pp_mux_table = { 5, 9, },
- 	  .pp_count = 2,
--	  .pp_chg_id = 5, },
-+	  .pp_chg_id = 4, },
- 
- 	{ .n = "spdiftx_gclk",
- 	  .id = 85,
-@@ -762,7 +762,7 @@ static const struct {
- 	  .pp = { "syspll_divpmcck", "audiopll_divpmcck", },
- 	  .pp_mux_table = { 5, 9, },
- 	  .pp_count = 2,
--	  .pp_chg_id = 5, },
-+	  .pp_chg_id = 4, },
- 
- 	{ .n  = "tcb0_ch0_gclk",
- 	  .id = 88,
-@@ -961,9 +961,8 @@ static void __init sama7g5_pmc_setup(str
- 	parent_names[0] = md_slck_name;
- 	parent_names[1] = td_slck_name;
- 	parent_names[2] = "mainck";
--	parent_names[3] = "mck0";
- 	for (i = 0; i < ARRAY_SIZE(sama7g5_mckx); i++) {
--		u8 num_parents = 4 + sama7g5_mckx[i].ep_count;
-+		u8 num_parents = 3 + sama7g5_mckx[i].ep_count;
- 		u32 *mux_table;
- 
- 		mux_table = kmalloc_array(num_parents, sizeof(*mux_table),
-@@ -971,10 +970,10 @@ static void __init sama7g5_pmc_setup(str
- 		if (!mux_table)
- 			goto err_free;
- 
--		SAMA7G5_INIT_TABLE(mux_table, 4);
--		SAMA7G5_FILL_TABLE(&mux_table[4], sama7g5_mckx[i].ep_mux_table,
-+		SAMA7G5_INIT_TABLE(mux_table, 3);
-+		SAMA7G5_FILL_TABLE(&mux_table[3], sama7g5_mckx[i].ep_mux_table,
- 				   sama7g5_mckx[i].ep_count);
--		SAMA7G5_FILL_TABLE(&parent_names[4], sama7g5_mckx[i].ep,
-+		SAMA7G5_FILL_TABLE(&parent_names[3], sama7g5_mckx[i].ep,
- 				   sama7g5_mckx[i].ep_count);
- 
- 		hw = at91_clk_sama7g5_register_master(regmap, sama7g5_mckx[i].n,
-@@ -997,20 +996,19 @@ static void __init sama7g5_pmc_setup(str
- 	parent_names[0] = md_slck_name;
- 	parent_names[1] = td_slck_name;
- 	parent_names[2] = "mainck";
--	parent_names[3] = "mck0";
--	parent_names[4] = "syspll_divpmcck";
--	parent_names[5] = "ddrpll_divpmcck";
--	parent_names[6] = "imgpll_divpmcck";
--	parent_names[7] = "baudpll_divpmcck";
--	parent_names[8] = "audiopll_divpmcck";
--	parent_names[9] = "ethpll_divpmcck";
-+	parent_names[3] = "syspll_divpmcck";
-+	parent_names[4] = "ddrpll_divpmcck";
-+	parent_names[5] = "imgpll_divpmcck";
-+	parent_names[6] = "baudpll_divpmcck";
-+	parent_names[7] = "audiopll_divpmcck";
-+	parent_names[8] = "ethpll_divpmcck";
- 	for (i = 0; i < 8; i++) {
- 		char name[6];
- 
- 		snprintf(name, sizeof(name), "prog%d", i);
- 
- 		hw = at91_clk_register_programmable(regmap, name, parent_names,
--						    10, i,
-+						    9, i,
- 						    &programmable_layout,
- 						    sama7g5_prog_mux_table);
- 		if (IS_ERR(hw))
-@@ -1047,9 +1045,8 @@ static void __init sama7g5_pmc_setup(str
- 	parent_names[0] = md_slck_name;
- 	parent_names[1] = td_slck_name;
- 	parent_names[2] = "mainck";
--	parent_names[3] = "mck0";
- 	for (i = 0; i < ARRAY_SIZE(sama7g5_gck); i++) {
--		u8 num_parents = 4 + sama7g5_gck[i].pp_count;
-+		u8 num_parents = 3 + sama7g5_gck[i].pp_count;
- 		u32 *mux_table;
- 
- 		mux_table = kmalloc_array(num_parents, sizeof(*mux_table),
-@@ -1057,10 +1054,10 @@ static void __init sama7g5_pmc_setup(str
- 		if (!mux_table)
- 			goto err_free;
- 
--		SAMA7G5_INIT_TABLE(mux_table, 4);
--		SAMA7G5_FILL_TABLE(&mux_table[4], sama7g5_gck[i].pp_mux_table,
-+		SAMA7G5_INIT_TABLE(mux_table, 3);
-+		SAMA7G5_FILL_TABLE(&mux_table[3], sama7g5_gck[i].pp_mux_table,
- 				   sama7g5_gck[i].pp_count);
--		SAMA7G5_FILL_TABLE(&parent_names[4], sama7g5_gck[i].pp,
-+		SAMA7G5_FILL_TABLE(&parent_names[3], sama7g5_gck[i].pp,
- 				   sama7g5_gck[i].pp_count);
- 
- 		hw = at91_clk_register_generated(regmap, &pmc_pcr_lock,
diff --git a/target/linux/at91/patches-5.10/108-clk-at91-sama7g5-decrease-lower-limit-for-MCK0-rate.patch b/target/linux/at91/patches-5.10/108-clk-at91-sama7g5-decrease-lower-limit-for-MCK0-rate.patch
deleted file mode 100644
index 2bc1907cfb28..000000000000
--- a/target/linux/at91/patches-5.10/108-clk-at91-sama7g5-decrease-lower-limit-for-MCK0-rate.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 8b88f1e9918c173b24b43015cdb713cdde9e4d17 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 19 Nov 2020 17:43:14 +0200
-Subject: [PATCH 108/247] clk: at91: sama7g5: decrease lower limit for MCK0
- rate
-
-On SAMA7G5 CPU clock is changed at run-time by DVFS. Since MCK0 and
-CPU clock shares the same parent clock (CPUPLL clock) the MCK0 is
-also changed by DVFS to avoid over/under clocking of MCK0 consumers.
-The lower limit is changed to be able to set MCK0 accordingly by
-DVFS.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605800597-16720-9-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/sama7g5.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -807,7 +807,7 @@ static const struct clk_pll_characterist
- 
- /* MCK0 characteristics. */
- static const struct clk_master_characteristics mck0_characteristics = {
--	.output = { .min = 140000000, .max = 200000000 },
-+	.output = { .min = 50000000, .max = 200000000 },
- 	.divisors = { 1, 2, 4, 3, 5 },
- 	.have_div3_pres = 1,
- };
diff --git a/target/linux/at91/patches-5.10/109-clk-at91-sama7g5-do-not-allow-cpu-pll-to-go-higher-t.patch b/target/linux/at91/patches-5.10/109-clk-at91-sama7g5-do-not-allow-cpu-pll-to-go-higher-t.patch
deleted file mode 100644
index b11efc9d4eb6..000000000000
--- a/target/linux/at91/patches-5.10/109-clk-at91-sama7g5-do-not-allow-cpu-pll-to-go-higher-t.patch
+++ /dev/null
@@ -1,221 +0,0 @@
-From 943ed75a2a5ab08582d3bc8025e8111903698763 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 19 Nov 2020 17:43:15 +0200
-Subject: [PATCH 109/247] clk: at91: sama7g5: do not allow cpu pll to go higher
- than 1GHz
-
-Since CPU PLL feeds both CPU clock and MCK0, MCK0 cannot go higher
-than 200MHz and MCK0 maximum prescaller is 5 limit the CPU PLL at
-1GHz to avoid MCK0 overclocking while CPU PLL is changed by DVFS.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605800597-16720-10-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/sama7g5.c | 61 +++++++++++++++++++++++++++++---------
- 1 file changed, 47 insertions(+), 14 deletions(-)
-
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -89,11 +89,40 @@ static const struct clk_pll_layout pll_l
- 	.endiv_shift	= 30,
- };
- 
-+/*
-+ * CPU PLL output range.
-+ * Notice: The upper limit has been setup to 1000000002 due to hardware
-+ * block which cannot output exactly 1GHz.
-+ */
-+static const struct clk_range cpu_pll_outputs[] = {
-+	{ .min = 2343750, .max = 1000000002 },
-+};
-+
-+/* PLL output range. */
-+static const struct clk_range pll_outputs[] = {
-+	{ .min = 2343750, .max = 1200000000 },
-+};
-+
-+/* CPU PLL characteristics. */
-+static const struct clk_pll_characteristics cpu_pll_characteristics = {
-+	.input = { .min = 12000000, .max = 50000000 },
-+	.num_output = ARRAY_SIZE(cpu_pll_outputs),
-+	.output = cpu_pll_outputs,
-+};
-+
-+/* PLL characteristics. */
-+static const struct clk_pll_characteristics pll_characteristics = {
-+	.input = { .min = 12000000, .max = 50000000 },
-+	.num_output = ARRAY_SIZE(pll_outputs),
-+	.output = pll_outputs,
-+};
-+
- /**
-  * PLL clocks description
-  * @n:		clock name
-  * @p:		clock parent
-  * @l:		clock layout
-+ * @c:		clock characteristics
-  * @t:		clock type
-  * @f:		clock flags
-  * @eid:	export index in sama7g5->chws[] array
-@@ -102,6 +131,7 @@ static const struct {
- 	const char *n;
- 	const char *p;
- 	const struct clk_pll_layout *l;
-+	const struct clk_pll_characteristics *c;
- 	unsigned long f;
- 	u8 t;
- 	u8 eid;
-@@ -110,6 +140,7 @@ static const struct {
- 		{ .n = "cpupll_fracck",
- 		  .p = "mainck",
- 		  .l = &pll_layout_frac,
-+		  .c = &cpu_pll_characteristics,
- 		  .t = PLL_TYPE_FRAC,
- 		   /*
- 		    * This feeds cpupll_divpmcck which feeds CPU. It should
-@@ -120,6 +151,7 @@ static const struct {
- 		{ .n = "cpupll_divpmcck",
- 		  .p = "cpupll_fracck",
- 		  .l = &pll_layout_divpmc,
-+		  .c = &cpu_pll_characteristics,
- 		  .t = PLL_TYPE_DIV,
- 		   /* This feeds CPU. It should not be disabled. */
- 		  .f = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
-@@ -130,6 +162,7 @@ static const struct {
- 		{ .n = "syspll_fracck",
- 		  .p = "mainck",
- 		  .l = &pll_layout_frac,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_FRAC,
- 		   /*
- 		    * This feeds syspll_divpmcck which may feed critial parts
-@@ -141,6 +174,7 @@ static const struct {
- 		{ .n = "syspll_divpmcck",
- 		  .p = "syspll_fracck",
- 		  .l = &pll_layout_divpmc,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_DIV,
- 		   /*
- 		    * This may feed critial parts of the systems like timers.
-@@ -154,6 +188,7 @@ static const struct {
- 		{ .n = "ddrpll_fracck",
- 		  .p = "mainck",
- 		  .l = &pll_layout_frac,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_FRAC,
- 		   /*
- 		    * This feeds ddrpll_divpmcck which feeds DDR. It should not
-@@ -164,6 +199,7 @@ static const struct {
- 		{ .n = "ddrpll_divpmcck",
- 		  .p = "ddrpll_fracck",
- 		  .l = &pll_layout_divpmc,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_DIV,
- 		   /* This feeds DDR. It should not be disabled. */
- 		  .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, },
-@@ -173,12 +209,14 @@ static const struct {
- 		{ .n = "imgpll_fracck",
- 		  .p = "mainck",
- 		  .l = &pll_layout_frac,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_FRAC,
- 		  .f = CLK_SET_RATE_GATE, },
- 
- 		{ .n = "imgpll_divpmcck",
- 		  .p = "imgpll_fracck",
- 		  .l = &pll_layout_divpmc,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_DIV,
- 		  .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
- 		       CLK_SET_RATE_PARENT, },
-@@ -188,12 +226,14 @@ static const struct {
- 		{ .n = "baudpll_fracck",
- 		  .p = "mainck",
- 		  .l = &pll_layout_frac,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_FRAC,
- 		  .f = CLK_SET_RATE_GATE, },
- 
- 		{ .n = "baudpll_divpmcck",
- 		  .p = "baudpll_fracck",
- 		  .l = &pll_layout_divpmc,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_DIV,
- 		  .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
- 		       CLK_SET_RATE_PARENT, },
-@@ -203,12 +243,14 @@ static const struct {
- 		{ .n = "audiopll_fracck",
- 		  .p = "main_xtal",
- 		  .l = &pll_layout_frac,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_FRAC,
- 		  .f = CLK_SET_RATE_GATE, },
- 
- 		{ .n = "audiopll_divpmcck",
- 		  .p = "audiopll_fracck",
- 		  .l = &pll_layout_divpmc,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_DIV,
- 		  .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
- 		       CLK_SET_RATE_PARENT,
-@@ -217,6 +259,7 @@ static const struct {
- 		{ .n = "audiopll_diviock",
- 		  .p = "audiopll_fracck",
- 		  .l = &pll_layout_divio,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_DIV,
- 		  .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
- 		       CLK_SET_RATE_PARENT,
-@@ -227,12 +270,14 @@ static const struct {
- 		{ .n = "ethpll_fracck",
- 		  .p = "main_xtal",
- 		  .l = &pll_layout_frac,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_FRAC,
- 		  .f = CLK_SET_RATE_GATE, },
- 
- 		{ .n = "ethpll_divpmcck",
- 		  .p = "ethpll_fracck",
- 		  .l = &pll_layout_divpmc,
-+		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_DIV,
- 		  .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
- 		       CLK_SET_RATE_PARENT, },
-@@ -793,18 +838,6 @@ static const struct {
- 	  .pp_chg_id = INT_MIN, },
- };
- 
--/* PLL output range. */
--static const struct clk_range pll_outputs[] = {
--	{ .min = 2343750, .max = 1200000000 },
--};
--
--/* PLL characteristics. */
--static const struct clk_pll_characteristics pll_characteristics = {
--	.input = { .min = 12000000, .max = 50000000 },
--	.num_output = ARRAY_SIZE(pll_outputs),
--	.output = pll_outputs,
--};
--
- /* MCK0 characteristics. */
- static const struct clk_master_characteristics mck0_characteristics = {
- 	.output = { .min = 50000000, .max = 200000000 },
-@@ -921,7 +954,7 @@ static void __init sama7g5_pmc_setup(str
- 				hw = sam9x60_clk_register_frac_pll(regmap,
- 					&pmc_pll_lock, sama7g5_plls[i][j].n,
- 					sama7g5_plls[i][j].p, parent_hw, i,
--					&pll_characteristics,
-+					sama7g5_plls[i][j].c,
- 					sama7g5_plls[i][j].l,
- 					sama7g5_plls[i][j].f);
- 				break;
-@@ -930,7 +963,7 @@ static void __init sama7g5_pmc_setup(str
- 				hw = sam9x60_clk_register_div_pll(regmap,
- 					&pmc_pll_lock, sama7g5_plls[i][j].n,
- 					sama7g5_plls[i][j].p, i,
--					&pll_characteristics,
-+					sama7g5_plls[i][j].c,
- 					sama7g5_plls[i][j].l,
- 					sama7g5_plls[i][j].f);
- 				break;
diff --git a/target/linux/at91/patches-5.10/110-clk-at91-clk-master-re-factor-master-clock.patch b/target/linux/at91/patches-5.10/110-clk-at91-clk-master-re-factor-master-clock.patch
deleted file mode 100644
index a0eadd888646..000000000000
--- a/target/linux/at91/patches-5.10/110-clk-at91-clk-master-re-factor-master-clock.patch
+++ /dev/null
@@ -1,1230 +0,0 @@
-From 9109b768fe65994547ef464b13e508b22de3e89b Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 19 Nov 2020 17:43:16 +0200
-Subject: [PATCH 110/247] clk: at91: clk-master: re-factor master clock
-
-Re-factor master clock driver by splitting it into 2 clocks: prescaller
-and divider clocks. Based on registered clock flags the prescaler's rate
-could be changed at runtime. This is necessary for platforms supporting
-DVFS (e.g. SAMA7G5) where master clock could be changed at run-time.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605800597-16720-11-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/at91rm9200.c  |  21 ++-
- drivers/clk/at91/at91sam9260.c |  26 ++-
- drivers/clk/at91/at91sam9g45.c |  32 +++-
- drivers/clk/at91/at91sam9n12.c |  36 ++--
- drivers/clk/at91/at91sam9rl.c  |  23 ++-
- drivers/clk/at91/at91sam9x5.c  |  28 ++-
- drivers/clk/at91/clk-master.c  | 335 ++++++++++++++++++++++++++++-----
- drivers/clk/at91/dt-compat.c   |  15 +-
- drivers/clk/at91/pmc.h         |  16 +-
- drivers/clk/at91/sam9x60.c     |  23 ++-
- drivers/clk/at91/sama5d2.c     |  42 +++--
- drivers/clk/at91/sama5d3.c     |  38 ++--
- drivers/clk/at91/sama5d4.c     |  40 ++--
- drivers/clk/at91/sama7g5.c     |  13 +-
- 14 files changed, 542 insertions(+), 146 deletions(-)
-
---- a/drivers/clk/at91/at91rm9200.c
-+++ b/drivers/clk/at91/at91rm9200.c
-@@ -7,6 +7,8 @@
- 
- #include "pmc.h"
- 
-+static DEFINE_SPINLOCK(rm9200_mck_lock);
-+
- struct sck {
- 	char *n;
- 	char *p;
-@@ -137,9 +139,20 @@ static void __init at91rm9200_pmc_setup(
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "pllack";
- 	parent_names[3] = "pllbck";
--	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
--				      &at91rm9200_master_layout,
--				      &rm9200_mck_characteristics);
-+	hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
-+					   parent_names,
-+					   &at91rm9200_master_layout,
-+					   &rm9200_mck_characteristics,
-+					   &rm9200_mck_lock, CLK_SET_RATE_GATE,
-+					   INT_MIN);
-+	if (IS_ERR(hw))
-+		goto err_free;
-+
-+	hw = at91_clk_register_master_div(regmap, "masterck_div",
-+					  "masterck_pres",
-+					  &at91rm9200_master_layout,
-+					  &rm9200_mck_characteristics,
-+					  &rm9200_mck_lock, CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -181,7 +194,7 @@ static void __init at91rm9200_pmc_setup(
- 	for (i = 0; i < ARRAY_SIZE(at91rm9200_periphck); i++) {
- 		hw = at91_clk_register_peripheral(regmap,
- 						  at91rm9200_periphck[i].n,
--						  "masterck",
-+						  "masterck_div",
- 						  at91rm9200_periphck[i].id);
- 		if (IS_ERR(hw))
- 			goto err_free;
---- a/drivers/clk/at91/at91sam9260.c
-+++ b/drivers/clk/at91/at91sam9260.c
-@@ -32,6 +32,8 @@ struct at91sam926x_data {
- 	bool has_slck;
- };
- 
-+static DEFINE_SPINLOCK(at91sam9260_mck_lock);
-+
- static const struct clk_master_characteristics sam9260_mck_characteristics = {
- 	.output = { .min = 0, .max = 105000000 },
- 	.divisors = { 1, 2, 4, 0 },
-@@ -218,8 +220,8 @@ static const struct sck at91sam9261_syst
- 	{ .n = "pck1",  .p = "prog1",    .id = 9 },
- 	{ .n = "pck2",  .p = "prog2",    .id = 10 },
- 	{ .n = "pck3",  .p = "prog3",    .id = 11 },
--	{ .n = "hclk0", .p = "masterck", .id = 16 },
--	{ .n = "hclk1", .p = "masterck", .id = 17 },
-+	{ .n = "hclk0", .p = "masterck_div", .id = 16 },
-+	{ .n = "hclk1", .p = "masterck_div", .id = 17 },
- };
- 
- static const struct pck at91sam9261_periphck[] = {
-@@ -413,9 +415,21 @@ static void __init at91sam926x_pmc_setup
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "pllack";
- 	parent_names[3] = "pllbck";
--	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
--				      &at91rm9200_master_layout,
--				      data->mck_characteristics);
-+	hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
-+					   parent_names,
-+					   &at91rm9200_master_layout,
-+					   data->mck_characteristics,
-+					   &at91sam9260_mck_lock,
-+					   CLK_SET_RATE_GATE, INT_MIN);
-+	if (IS_ERR(hw))
-+		goto err_free;
-+
-+	hw = at91_clk_register_master_div(regmap, "masterck_div",
-+					  "masterck_pres",
-+					  &at91rm9200_master_layout,
-+					  data->mck_characteristics,
-+					  &at91sam9260_mck_lock,
-+					  CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -457,7 +471,7 @@ static void __init at91sam926x_pmc_setup
- 	for (i = 0; i < data->num_pck; i++) {
- 		hw = at91_clk_register_peripheral(regmap,
- 						  data->pck[i].n,
--						  "masterck",
-+						  "masterck_div",
- 						  data->pck[i].id);
- 		if (IS_ERR(hw))
- 			goto err_free;
---- a/drivers/clk/at91/at91sam9g45.c
-+++ b/drivers/clk/at91/at91sam9g45.c
-@@ -7,6 +7,8 @@
- 
- #include "pmc.h"
- 
-+static DEFINE_SPINLOCK(at91sam9g45_mck_lock);
-+
- static const struct clk_master_characteristics mck_characteristics = {
- 	.output = { .min = 0, .max = 133333333 },
- 	.divisors = { 1, 2, 4, 3 },
-@@ -40,10 +42,10 @@ static const struct {
- 	char *p;
- 	u8 id;
- } at91sam9g45_systemck[] = {
--	{ .n = "ddrck", .p = "masterck", .id = 2 },
--	{ .n = "uhpck", .p = "usbck",    .id = 6 },
--	{ .n = "pck0",  .p = "prog0",    .id = 8 },
--	{ .n = "pck1",  .p = "prog1",    .id = 9 },
-+	{ .n = "ddrck", .p = "masterck_div", .id = 2 },
-+	{ .n = "uhpck", .p = "usbck",        .id = 6 },
-+	{ .n = "pck0",  .p = "prog0",        .id = 8 },
-+	{ .n = "pck1",  .p = "prog1",        .id = 9 },
- };
- 
- struct pck {
-@@ -148,9 +150,21 @@ static void __init at91sam9g45_pmc_setup
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "utmick";
--	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
--				      &at91rm9200_master_layout,
--				      &mck_characteristics);
-+	hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
-+					   parent_names,
-+					   &at91rm9200_master_layout,
-+					   &mck_characteristics,
-+					   &at91sam9g45_mck_lock,
-+					   CLK_SET_RATE_GATE, INT_MIN);
-+	if (IS_ERR(hw))
-+		goto err_free;
-+
-+	hw = at91_clk_register_master_div(regmap, "masterck_div",
-+					  "masterck_pres",
-+					  &at91rm9200_master_layout,
-+					  &mck_characteristics,
-+					  &at91sam9g45_mck_lock,
-+					  CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -166,7 +180,7 @@ static void __init at91sam9g45_pmc_setup
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "utmick";
--	parent_names[4] = "masterck";
-+	parent_names[4] = "masterck_div";
- 	for (i = 0; i < 2; i++) {
- 		char name[6];
- 
-@@ -195,7 +209,7 @@ static void __init at91sam9g45_pmc_setup
- 	for (i = 0; i < ARRAY_SIZE(at91sam9g45_periphck); i++) {
- 		hw = at91_clk_register_peripheral(regmap,
- 						  at91sam9g45_periphck[i].n,
--						  "masterck",
-+						  "masterck_div",
- 						  at91sam9g45_periphck[i].id);
- 		if (IS_ERR(hw))
- 			goto err_free;
---- a/drivers/clk/at91/at91sam9n12.c
-+++ b/drivers/clk/at91/at91sam9n12.c
-@@ -7,6 +7,8 @@
- 
- #include "pmc.h"
- 
-+static DEFINE_SPINLOCK(at91sam9n12_mck_lock);
-+
- static const struct clk_master_characteristics mck_characteristics = {
- 	.output = { .min = 0, .max = 133333333 },
- 	.divisors = { 1, 2, 4, 3 },
-@@ -54,12 +56,12 @@ static const struct {
- 	char *p;
- 	u8 id;
- } at91sam9n12_systemck[] = {
--	{ .n = "ddrck", .p = "masterck", .id = 2 },
--	{ .n = "lcdck", .p = "masterck", .id = 3 },
--	{ .n = "uhpck", .p = "usbck",    .id = 6 },
--	{ .n = "udpck", .p = "usbck",    .id = 7 },
--	{ .n = "pck0",  .p = "prog0",    .id = 8 },
--	{ .n = "pck1",  .p = "prog1",    .id = 9 },
-+	{ .n = "ddrck", .p = "masterck_div", .id = 2 },
-+	{ .n = "lcdck", .p = "masterck_div", .id = 3 },
-+	{ .n = "uhpck", .p = "usbck",        .id = 6 },
-+	{ .n = "udpck", .p = "usbck",        .id = 7 },
-+	{ .n = "pck0",  .p = "prog0",        .id = 8 },
-+	{ .n = "pck1",  .p = "prog1",        .id = 9 },
- };
- 
- static const struct clk_pcr_layout at91sam9n12_pcr_layout = {
-@@ -175,9 +177,21 @@ static void __init at91sam9n12_pmc_setup
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "pllbck";
--	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
--				      &at91sam9x5_master_layout,
--				      &mck_characteristics);
-+	hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
-+					   parent_names,
-+					   &at91sam9x5_master_layout,
-+					   &mck_characteristics,
-+					   &at91sam9n12_mck_lock,
-+					   CLK_SET_RATE_GATE, INT_MIN);
-+	if (IS_ERR(hw))
-+		goto err_free;
-+
-+	hw = at91_clk_register_master_div(regmap, "masterck_div",
-+					  "masterck_pres",
-+					  &at91sam9x5_master_layout,
-+					  &mck_characteristics,
-+					  &at91sam9n12_mck_lock,
-+					  CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -191,7 +205,7 @@ static void __init at91sam9n12_pmc_setup
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "pllbck";
--	parent_names[4] = "masterck";
-+	parent_names[4] = "masterck_div";
- 	for (i = 0; i < 2; i++) {
- 		char name[6];
- 
-@@ -221,7 +235,7 @@ static void __init at91sam9n12_pmc_setup
- 		hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
- 							 &at91sam9n12_pcr_layout,
- 							 at91sam9n12_periphck[i].n,
--							 "masterck",
-+							 "masterck_div",
- 							 at91sam9n12_periphck[i].id,
- 							 &range, INT_MIN);
- 		if (IS_ERR(hw))
---- a/drivers/clk/at91/at91sam9rl.c
-+++ b/drivers/clk/at91/at91sam9rl.c
-@@ -7,6 +7,8 @@
- 
- #include "pmc.h"
- 
-+static DEFINE_SPINLOCK(sam9rl_mck_lock);
-+
- static const struct clk_master_characteristics sam9rl_mck_characteristics = {
- 	.output = { .min = 0, .max = 94000000 },
- 	.divisors = { 1, 2, 4, 0 },
-@@ -117,9 +119,20 @@ static void __init at91sam9rl_pmc_setup(
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "pllack";
- 	parent_names[3] = "utmick";
--	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
--				      &at91rm9200_master_layout,
--				      &sam9rl_mck_characteristics);
-+	hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
-+					   parent_names,
-+					   &at91rm9200_master_layout,
-+					   &sam9rl_mck_characteristics,
-+					   &sam9rl_mck_lock, CLK_SET_RATE_GATE,
-+					   INT_MIN);
-+	if (IS_ERR(hw))
-+		goto err_free;
-+
-+	hw = at91_clk_register_master_div(regmap, "masterck_div",
-+					  "masterck_pres",
-+					  &at91rm9200_master_layout,
-+					  &sam9rl_mck_characteristics,
-+					  &sam9rl_mck_lock, CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -129,7 +142,7 @@ static void __init at91sam9rl_pmc_setup(
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "pllack";
- 	parent_names[3] = "utmick";
--	parent_names[4] = "masterck";
-+	parent_names[4] = "masterck_div";
- 	for (i = 0; i < 2; i++) {
- 		char name[6];
- 
-@@ -158,7 +171,7 @@ static void __init at91sam9rl_pmc_setup(
- 	for (i = 0; i < ARRAY_SIZE(at91sam9rl_periphck); i++) {
- 		hw = at91_clk_register_peripheral(regmap,
- 						  at91sam9rl_periphck[i].n,
--						  "masterck",
-+						  "masterck_div",
- 						  at91sam9rl_periphck[i].id);
- 		if (IS_ERR(hw))
- 			goto err_free;
---- a/drivers/clk/at91/at91sam9x5.c
-+++ b/drivers/clk/at91/at91sam9x5.c
-@@ -7,6 +7,8 @@
- 
- #include "pmc.h"
- 
-+static DEFINE_SPINLOCK(mck_lock);
-+
- static const struct clk_master_characteristics mck_characteristics = {
- 	.output = { .min = 0, .max = 133333333 },
- 	.divisors = { 1, 2, 4, 3 },
-@@ -41,7 +43,7 @@ static const struct {
- 	char *p;
- 	u8 id;
- } at91sam9x5_systemck[] = {
--	{ .n = "ddrck", .p = "masterck", .id = 2 },
-+	{ .n = "ddrck", .p = "masterck_div", .id = 2 },
- 	{ .n = "smdck", .p = "smdclk",   .id = 4 },
- 	{ .n = "uhpck", .p = "usbck",    .id = 6 },
- 	{ .n = "udpck", .p = "usbck",    .id = 7 },
-@@ -196,9 +198,19 @@ static void __init at91sam9x5_pmc_setup(
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "utmick";
--	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
--				      &at91sam9x5_master_layout,
--				      &mck_characteristics);
-+	hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
-+					   parent_names,
-+					   &at91sam9x5_master_layout,
-+					   &mck_characteristics, &mck_lock,
-+					   CLK_SET_RATE_GATE, INT_MIN);
-+	if (IS_ERR(hw))
-+		goto err_free;
-+
-+	hw = at91_clk_register_master_div(regmap, "masterck_div",
-+					  "masterck_pres",
-+					  &at91sam9x5_master_layout,
-+					  &mck_characteristics, &mck_lock,
-+					  CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -218,7 +230,7 @@ static void __init at91sam9x5_pmc_setup(
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "utmick";
--	parent_names[4] = "masterck";
-+	parent_names[4] = "masterck_div";
- 	for (i = 0; i < 2; i++) {
- 		char name[6];
- 
-@@ -245,7 +257,7 @@ static void __init at91sam9x5_pmc_setup(
- 	}
- 
- 	if (has_lcdck) {
--		hw = at91_clk_register_system(regmap, "lcdck", "masterck", 3);
-+		hw = at91_clk_register_system(regmap, "lcdck", "masterck_div", 3);
- 		if (IS_ERR(hw))
- 			goto err_free;
- 
-@@ -256,7 +268,7 @@ static void __init at91sam9x5_pmc_setup(
- 		hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
- 							 &at91sam9x5_pcr_layout,
- 							 at91sam9x5_periphck[i].n,
--							 "masterck",
-+							 "masterck_div",
- 							 at91sam9x5_periphck[i].id,
- 							 &range, INT_MIN);
- 		if (IS_ERR(hw))
-@@ -269,7 +281,7 @@ static void __init at91sam9x5_pmc_setup(
- 		hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
- 							 &at91sam9x5_pcr_layout,
- 							 extra_pcks[i].n,
--							 "masterck",
-+							 "masterck_div",
- 							 extra_pcks[i].id,
- 							 &range, INT_MIN);
- 		if (IS_ERR(hw))
---- a/drivers/clk/at91/clk-master.c
-+++ b/drivers/clk/at91/clk-master.c
-@@ -58,83 +58,309 @@ static inline bool clk_master_ready(stru
- static int clk_master_prepare(struct clk_hw *hw)
- {
- 	struct clk_master *master = to_clk_master(hw);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(master->lock, flags);
- 
- 	while (!clk_master_ready(master))
- 		cpu_relax();
- 
-+	spin_unlock_irqrestore(master->lock, flags);
-+
- 	return 0;
- }
- 
- static int clk_master_is_prepared(struct clk_hw *hw)
- {
- 	struct clk_master *master = to_clk_master(hw);
-+	unsigned long flags;
-+	bool status;
-+
-+	spin_lock_irqsave(master->lock, flags);
-+	status = clk_master_ready(master);
-+	spin_unlock_irqrestore(master->lock, flags);
- 
--	return clk_master_ready(master);
-+	return status;
- }
- 
--static unsigned long clk_master_recalc_rate(struct clk_hw *hw,
--					    unsigned long parent_rate)
-+static unsigned long clk_master_div_recalc_rate(struct clk_hw *hw,
-+						unsigned long parent_rate)
- {
--	u8 pres;
- 	u8 div;
--	unsigned long rate = parent_rate;
-+	unsigned long flags, rate = parent_rate;
- 	struct clk_master *master = to_clk_master(hw);
- 	const struct clk_master_layout *layout = master->layout;
- 	const struct clk_master_characteristics *characteristics =
- 						master->characteristics;
- 	unsigned int mckr;
- 
-+	spin_lock_irqsave(master->lock, flags);
- 	regmap_read(master->regmap, master->layout->offset, &mckr);
-+	spin_unlock_irqrestore(master->lock, flags);
-+
- 	mckr &= layout->mask;
- 
--	pres = (mckr >> layout->pres_shift) & MASTER_PRES_MASK;
- 	div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
- 
--	if (characteristics->have_div3_pres && pres == MASTER_PRES_MAX)
--		rate /= 3;
--	else
--		rate >>= pres;
--
- 	rate /= characteristics->divisors[div];
- 
- 	if (rate < characteristics->output.min)
--		pr_warn("master clk is underclocked");
-+		pr_warn("master clk div is underclocked");
- 	else if (rate > characteristics->output.max)
--		pr_warn("master clk is overclocked");
-+		pr_warn("master clk div is overclocked");
- 
- 	return rate;
- }
- 
--static u8 clk_master_get_parent(struct clk_hw *hw)
-+static const struct clk_ops master_div_ops = {
-+	.prepare = clk_master_prepare,
-+	.is_prepared = clk_master_is_prepared,
-+	.recalc_rate = clk_master_div_recalc_rate,
-+};
-+
-+static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate,
-+				   unsigned long parent_rate)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+	const struct clk_master_characteristics *characteristics =
-+						master->characteristics;
-+	unsigned long flags;
-+	int div, i;
-+
-+	div = DIV_ROUND_CLOSEST(parent_rate, rate);
-+	if (div > ARRAY_SIZE(characteristics->divisors))
-+		return -EINVAL;
-+
-+	for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) {
-+		if (!characteristics->divisors[i])
-+			break;
-+
-+		if (div == characteristics->divisors[i]) {
-+			div = i;
-+			break;
-+		}
-+	}
-+
-+	if (i == ARRAY_SIZE(characteristics->divisors))
-+		return -EINVAL;
-+
-+	spin_lock_irqsave(master->lock, flags);
-+	regmap_update_bits(master->regmap, master->layout->offset,
-+			   (MASTER_DIV_MASK << MASTER_DIV_SHIFT),
-+			   (div << MASTER_DIV_SHIFT));
-+	while (!clk_master_ready(master))
-+		cpu_relax();
-+	spin_unlock_irqrestore(master->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int clk_master_div_determine_rate(struct clk_hw *hw,
-+					 struct clk_rate_request *req)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+	const struct clk_master_characteristics *characteristics =
-+						master->characteristics;
-+	struct clk_hw *parent;
-+	unsigned long parent_rate, tmp_rate, best_rate = 0;
-+	int i, best_diff = INT_MIN, tmp_diff;
-+
-+	parent = clk_hw_get_parent(hw);
-+	if (!parent)
-+		return -EINVAL;
-+
-+	parent_rate = clk_hw_get_rate(parent);
-+	if (!parent_rate)
-+		return -EINVAL;
-+
-+	for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) {
-+		if (!characteristics->divisors[i])
-+			break;
-+
-+		tmp_rate = DIV_ROUND_CLOSEST_ULL(parent_rate,
-+						 characteristics->divisors[i]);
-+		tmp_diff = abs(tmp_rate - req->rate);
-+
-+		if (!best_rate || best_diff > tmp_diff) {
-+			best_diff = tmp_diff;
-+			best_rate = tmp_rate;
-+		}
-+
-+		if (!best_diff)
-+			break;
-+	}
-+
-+	req->best_parent_rate = best_rate;
-+	req->best_parent_hw = parent;
-+	req->rate = best_rate;
-+
-+	return 0;
-+}
-+
-+static const struct clk_ops master_div_ops_chg = {
-+	.prepare = clk_master_prepare,
-+	.is_prepared = clk_master_is_prepared,
-+	.recalc_rate = clk_master_div_recalc_rate,
-+	.determine_rate = clk_master_div_determine_rate,
-+	.set_rate = clk_master_div_set_rate,
-+};
-+
-+static void clk_sama7g5_master_best_diff(struct clk_rate_request *req,
-+					 struct clk_hw *parent,
-+					 unsigned long parent_rate,
-+					 long *best_rate,
-+					 long *best_diff,
-+					 u32 div)
-+{
-+	unsigned long tmp_rate, tmp_diff;
-+
-+	if (div == MASTER_PRES_MAX)
-+		tmp_rate = parent_rate / 3;
-+	else
-+		tmp_rate = parent_rate >> div;
-+
-+	tmp_diff = abs(req->rate - tmp_rate);
-+
-+	if (*best_diff < 0 || *best_diff >= tmp_diff) {
-+		*best_rate = tmp_rate;
-+		*best_diff = tmp_diff;
-+		req->best_parent_rate = parent_rate;
-+		req->best_parent_hw = parent;
-+	}
-+}
-+
-+static int clk_master_pres_determine_rate(struct clk_hw *hw,
-+					  struct clk_rate_request *req)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+	struct clk_rate_request req_parent = *req;
-+	const struct clk_master_characteristics *characteristics =
-+							master->characteristics;
-+	struct clk_hw *parent;
-+	long best_rate = LONG_MIN, best_diff = LONG_MIN;
-+	u32 pres;
-+	int i;
-+
-+	if (master->chg_pid < 0)
-+		return -EOPNOTSUPP;
-+
-+	parent = clk_hw_get_parent_by_index(hw, master->chg_pid);
-+	if (!parent)
-+		return -EOPNOTSUPP;
-+
-+	for (i = 0; i <= MASTER_PRES_MAX; i++) {
-+		if (characteristics->have_div3_pres && i == MASTER_PRES_MAX)
-+			pres = 3;
-+		else
-+			pres = 1 << i;
-+
-+		req_parent.rate = req->rate * pres;
-+		if (__clk_determine_rate(parent, &req_parent))
-+			continue;
-+
-+		clk_sama7g5_master_best_diff(req, parent, req_parent.rate,
-+					     &best_diff, &best_rate, pres);
-+		if (!best_diff)
-+			break;
-+	}
-+
-+	return 0;
-+}
-+
-+static int clk_master_pres_set_rate(struct clk_hw *hw, unsigned long rate,
-+				    unsigned long parent_rate)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+	unsigned long flags;
-+	unsigned int pres;
-+
-+	pres = DIV_ROUND_CLOSEST(parent_rate, rate);
-+	if (pres > MASTER_PRES_MAX)
-+		return -EINVAL;
-+
-+	else if (pres == 3)
-+		pres = MASTER_PRES_MAX;
-+	else
-+		pres = ffs(pres) - 1;
-+
-+	spin_lock_irqsave(master->lock, flags);
-+	regmap_update_bits(master->regmap, master->layout->offset,
-+			   (MASTER_PRES_MASK << master->layout->pres_shift),
-+			   (pres << master->layout->pres_shift));
-+
-+	while (!clk_master_ready(master))
-+		cpu_relax();
-+	spin_unlock_irqrestore(master->lock, flags);
-+
-+	return 0;
-+}
-+
-+static unsigned long clk_master_pres_recalc_rate(struct clk_hw *hw,
-+						 unsigned long parent_rate)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+	const struct clk_master_characteristics *characteristics =
-+						master->characteristics;
-+	unsigned long flags;
-+	unsigned int val, pres;
-+
-+	spin_lock_irqsave(master->lock, flags);
-+	regmap_read(master->regmap, master->layout->offset, &val);
-+	spin_unlock_irqrestore(master->lock, flags);
-+
-+	pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK;
-+	if (pres == 3 && characteristics->have_div3_pres)
-+		pres = 3;
-+	else
-+		pres = (1 << pres);
-+
-+	return DIV_ROUND_CLOSEST_ULL(parent_rate, pres);
-+}
-+
-+static u8 clk_master_pres_get_parent(struct clk_hw *hw)
- {
- 	struct clk_master *master = to_clk_master(hw);
-+	unsigned long flags;
- 	unsigned int mckr;
- 
-+	spin_lock_irqsave(master->lock, flags);
- 	regmap_read(master->regmap, master->layout->offset, &mckr);
-+	spin_unlock_irqrestore(master->lock, flags);
- 
- 	return mckr & AT91_PMC_CSS;
- }
- 
--static const struct clk_ops master_ops = {
-+static const struct clk_ops master_pres_ops = {
- 	.prepare = clk_master_prepare,
- 	.is_prepared = clk_master_is_prepared,
--	.recalc_rate = clk_master_recalc_rate,
--	.get_parent = clk_master_get_parent,
-+	.recalc_rate = clk_master_pres_recalc_rate,
-+	.get_parent = clk_master_pres_get_parent,
- };
- 
--struct clk_hw * __init
--at91_clk_register_master(struct regmap *regmap,
-+static const struct clk_ops master_pres_ops_chg = {
-+	.prepare = clk_master_prepare,
-+	.is_prepared = clk_master_is_prepared,
-+	.determine_rate = clk_master_pres_determine_rate,
-+	.recalc_rate = clk_master_pres_recalc_rate,
-+	.get_parent = clk_master_pres_get_parent,
-+	.set_rate = clk_master_pres_set_rate,
-+};
-+
-+static struct clk_hw * __init
-+at91_clk_register_master_internal(struct regmap *regmap,
- 		const char *name, int num_parents,
- 		const char **parent_names,
- 		const struct clk_master_layout *layout,
--		const struct clk_master_characteristics *characteristics)
-+		const struct clk_master_characteristics *characteristics,
-+		const struct clk_ops *ops, spinlock_t *lock, u32 flags,
-+		int chg_pid)
- {
- 	struct clk_master *master;
- 	struct clk_init_data init;
- 	struct clk_hw *hw;
- 	int ret;
- 
--	if (!name || !num_parents || !parent_names)
-+	if (!name || !num_parents || !parent_names || !lock)
- 		return ERR_PTR(-EINVAL);
- 
- 	master = kzalloc(sizeof(*master), GFP_KERNEL);
-@@ -142,15 +368,17 @@ at91_clk_register_master(struct regmap *
- 		return ERR_PTR(-ENOMEM);
- 
- 	init.name = name;
--	init.ops = &master_ops;
-+	init.ops = ops;
- 	init.parent_names = parent_names;
- 	init.num_parents = num_parents;
--	init.flags = 0;
-+	init.flags = flags;
- 
- 	master->hw.init = &init;
- 	master->layout = layout;
- 	master->characteristics = characteristics;
- 	master->regmap = regmap;
-+	master->chg_pid = chg_pid;
-+	master->lock = lock;
- 
- 	hw = &master->hw;
- 	ret = clk_hw_register(NULL, &master->hw);
-@@ -162,37 +390,54 @@ at91_clk_register_master(struct regmap *
- 	return hw;
- }
- 
--static unsigned long
--clk_sama7g5_master_recalc_rate(struct clk_hw *hw,
--			       unsigned long parent_rate)
-+struct clk_hw * __init
-+at91_clk_register_master_pres(struct regmap *regmap,
-+		const char *name, int num_parents,
-+		const char **parent_names,
-+		const struct clk_master_layout *layout,
-+		const struct clk_master_characteristics *characteristics,
-+		spinlock_t *lock, u32 flags, int chg_pid)
- {
--	struct clk_master *master = to_clk_master(hw);
-+	const struct clk_ops *ops;
- 
--	return DIV_ROUND_CLOSEST_ULL(parent_rate, (1 << master->div));
-+	if (flags & CLK_SET_RATE_GATE)
-+		ops = &master_pres_ops;
-+	else
-+		ops = &master_pres_ops_chg;
-+
-+	return at91_clk_register_master_internal(regmap, name, num_parents,
-+						 parent_names, layout,
-+						 characteristics, ops,
-+						 lock, flags, chg_pid);
- }
- 
--static void clk_sama7g5_master_best_diff(struct clk_rate_request *req,
--					 struct clk_hw *parent,
--					 unsigned long parent_rate,
--					 long *best_rate,
--					 long *best_diff,
--					 u32 div)
-+struct clk_hw * __init
-+at91_clk_register_master_div(struct regmap *regmap,
-+		const char *name, const char *parent_name,
-+		const struct clk_master_layout *layout,
-+		const struct clk_master_characteristics *characteristics,
-+		spinlock_t *lock, u32 flags)
- {
--	unsigned long tmp_rate, tmp_diff;
-+	const struct clk_ops *ops;
- 
--	if (div == MASTER_PRES_MAX)
--		tmp_rate = parent_rate / 3;
-+	if (flags & CLK_SET_RATE_GATE)
-+		ops = &master_div_ops;
- 	else
--		tmp_rate = parent_rate >> div;
-+		ops = &master_div_ops_chg;
- 
--	tmp_diff = abs(req->rate - tmp_rate);
-+	return at91_clk_register_master_internal(regmap, name, 1,
-+						 &parent_name, layout,
-+						 characteristics, ops,
-+						 lock, flags, -EINVAL);
-+}
- 
--	if (*best_diff < 0 || *best_diff >= tmp_diff) {
--		*best_rate = tmp_rate;
--		*best_diff = tmp_diff;
--		req->best_parent_rate = parent_rate;
--		req->best_parent_hw = parent;
--	}
-+static unsigned long
-+clk_sama7g5_master_recalc_rate(struct clk_hw *hw,
-+			       unsigned long parent_rate)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+
-+	return DIV_ROUND_CLOSEST_ULL(parent_rate, (1 << master->div));
- }
- 
- static int clk_sama7g5_master_determine_rate(struct clk_hw *hw,
---- a/drivers/clk/at91/dt-compat.c
-+++ b/drivers/clk/at91/dt-compat.c
-@@ -24,6 +24,8 @@
- 
- #define GCK_INDEX_DT_AUDIO_PLL	5
- 
-+static DEFINE_SPINLOCK(mck_lock);
-+
- #ifdef CONFIG_HAVE_AT91_AUDIO_PLL
- static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np)
- {
-@@ -388,9 +390,16 @@ of_at91_clk_master_setup(struct device_n
- 	if (IS_ERR(regmap))
- 		return;
- 
--	hw = at91_clk_register_master(regmap, name, num_parents,
--				      parent_names, layout,
--				      characteristics);
-+	hw = at91_clk_register_master_pres(regmap, "masterck_pres", num_parents,
-+					   parent_names, layout,
-+					   characteristics, &mck_lock,
-+					   CLK_SET_RATE_GATE, INT_MIN);
-+	if (IS_ERR(hw))
-+		goto out_free_characteristics;
-+
-+	hw = at91_clk_register_master_div(regmap, name, "masterck_pres",
-+					  layout, characteristics,
-+					  &mck_lock, CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto out_free_characteristics;
- 
---- a/drivers/clk/at91/pmc.h
-+++ b/drivers/clk/at91/pmc.h
-@@ -155,10 +155,18 @@ at91_clk_register_sam9x5_main(struct reg
- 			      const char **parent_names, int num_parents);
- 
- struct clk_hw * __init
--at91_clk_register_master(struct regmap *regmap, const char *name,
--			 int num_parents, const char **parent_names,
--			 const struct clk_master_layout *layout,
--			 const struct clk_master_characteristics *characteristics);
-+at91_clk_register_master_pres(struct regmap *regmap, const char *name,
-+			      int num_parents, const char **parent_names,
-+			      const struct clk_master_layout *layout,
-+			      const struct clk_master_characteristics *characteristics,
-+			      spinlock_t *lock, u32 flags, int chg_pid);
-+
-+struct clk_hw * __init
-+at91_clk_register_master_div(struct regmap *regmap, const char *name,
-+			     const char *parent_names,
-+			     const struct clk_master_layout *layout,
-+			     const struct clk_master_characteristics *characteristics,
-+			     spinlock_t *lock, u32 flags);
- 
- struct clk_hw * __init
- at91_clk_sama7g5_register_master(struct regmap *regmap,
---- a/drivers/clk/at91/sam9x60.c
-+++ b/drivers/clk/at91/sam9x60.c
-@@ -8,6 +8,7 @@
- #include "pmc.h"
- 
- static DEFINE_SPINLOCK(pmc_pll_lock);
-+static DEFINE_SPINLOCK(mck_lock);
- 
- static const struct clk_master_characteristics mck_characteristics = {
- 	.output = { .min = 140000000, .max = 200000000 },
-@@ -76,11 +77,11 @@ static const struct {
- 	char *p;
- 	u8 id;
- } sam9x60_systemck[] = {
--	{ .n = "ddrck",  .p = "masterck", .id = 2 },
-+	{ .n = "ddrck",  .p = "masterck_div", .id = 2 },
- 	{ .n = "uhpck",  .p = "usbck",    .id = 6 },
- 	{ .n = "pck0",   .p = "prog0",    .id = 8 },
- 	{ .n = "pck1",   .p = "prog1",    .id = 9 },
--	{ .n = "qspick", .p = "masterck", .id = 19 },
-+	{ .n = "qspick", .p = "masterck_div", .id = 19 },
- };
- 
- static const struct {
-@@ -268,9 +269,17 @@ static void __init sam9x60_pmc_setup(str
- 	parent_names[0] = md_slck_name;
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "pllack_divck";
--	hw = at91_clk_register_master(regmap, "masterck", 3, parent_names,
--				      &sam9x60_master_layout,
--				      &mck_characteristics);
-+	hw = at91_clk_register_master_pres(regmap, "masterck_pres", 3,
-+					   parent_names, &sam9x60_master_layout,
-+					   &mck_characteristics, &mck_lock,
-+					   CLK_SET_RATE_GATE, INT_MIN);
-+	if (IS_ERR(hw))
-+		goto err_free;
-+
-+	hw = at91_clk_register_master_div(regmap, "masterck_div",
-+					  "masterck_pres", &sam9x60_master_layout,
-+					  &mck_characteristics, &mck_lock,
-+					  CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -286,7 +295,7 @@ static void __init sam9x60_pmc_setup(str
- 	parent_names[0] = md_slck_name;
- 	parent_names[1] = td_slck_name;
- 	parent_names[2] = "mainck";
--	parent_names[3] = "masterck";
-+	parent_names[3] = "masterck_div";
- 	parent_names[4] = "pllack_divck";
- 	parent_names[5] = "upllck_divck";
- 	for (i = 0; i < 2; i++) {
-@@ -318,7 +327,7 @@ static void __init sam9x60_pmc_setup(str
- 		hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
- 							 &sam9x60_pcr_layout,
- 							 sam9x60_periphck[i].n,
--							 "masterck",
-+							 "masterck_div",
- 							 sam9x60_periphck[i].id,
- 							 &range, INT_MIN);
- 		if (IS_ERR(hw))
---- a/drivers/clk/at91/sama5d2.c
-+++ b/drivers/clk/at91/sama5d2.c
-@@ -7,6 +7,8 @@
- 
- #include "pmc.h"
- 
-+static DEFINE_SPINLOCK(mck_lock);
-+
- static const struct clk_master_characteristics mck_characteristics = {
- 	.output = { .min = 124000000, .max = 166000000 },
- 	.divisors = { 1, 2, 4, 3 },
-@@ -40,14 +42,14 @@ static const struct {
- 	char *p;
- 	u8 id;
- } sama5d2_systemck[] = {
--	{ .n = "ddrck", .p = "masterck", .id = 2 },
--	{ .n = "lcdck", .p = "masterck", .id = 3 },
--	{ .n = "uhpck", .p = "usbck",    .id = 6 },
--	{ .n = "udpck", .p = "usbck",    .id = 7 },
--	{ .n = "pck0",  .p = "prog0",    .id = 8 },
--	{ .n = "pck1",  .p = "prog1",    .id = 9 },
--	{ .n = "pck2",  .p = "prog2",    .id = 10 },
--	{ .n = "iscck", .p = "masterck", .id = 18 },
-+	{ .n = "ddrck", .p = "masterck_div", .id = 2 },
-+	{ .n = "lcdck", .p = "masterck_div", .id = 3 },
-+	{ .n = "uhpck", .p = "usbck",        .id = 6 },
-+	{ .n = "udpck", .p = "usbck",        .id = 7 },
-+	{ .n = "pck0",  .p = "prog0",        .id = 8 },
-+	{ .n = "pck1",  .p = "prog1",        .id = 9 },
-+	{ .n = "pck2",  .p = "prog2",        .id = 10 },
-+	{ .n = "iscck", .p = "masterck_div", .id = 18 },
- };
- 
- static const struct {
-@@ -235,15 +237,25 @@ static void __init sama5d2_pmc_setup(str
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "utmick";
--	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
--				      &at91sam9x5_master_layout,
--				      &mck_characteristics);
-+	hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
-+					   parent_names,
-+					   &at91sam9x5_master_layout,
-+					   &mck_characteristics, &mck_lock,
-+					   CLK_SET_RATE_GATE, INT_MIN);
-+	if (IS_ERR(hw))
-+		goto err_free;
-+
-+	hw = at91_clk_register_master_div(regmap, "masterck_div",
-+					  "masterck_pres",
-+					  &at91sam9x5_master_layout,
-+					  &mck_characteristics, &mck_lock,
-+					  CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
- 	sama5d2_pmc->chws[PMC_MCK] = hw;
- 
--	hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck");
-+	hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck_div");
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -259,7 +271,7 @@ static void __init sama5d2_pmc_setup(str
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "utmick";
--	parent_names[4] = "masterck";
-+	parent_names[4] = "masterck_div";
- 	parent_names[5] = "audiopll_pmcck";
- 	for (i = 0; i < 3; i++) {
- 		char name[6];
-@@ -290,7 +302,7 @@ static void __init sama5d2_pmc_setup(str
- 		hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
- 							 &sama5d2_pcr_layout,
- 							 sama5d2_periphck[i].n,
--							 "masterck",
-+							 "masterck_div",
- 							 sama5d2_periphck[i].id,
- 							 &range, INT_MIN);
- 		if (IS_ERR(hw))
-@@ -317,7 +329,7 @@ static void __init sama5d2_pmc_setup(str
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "utmick";
--	parent_names[4] = "masterck";
-+	parent_names[4] = "masterck_div";
- 	parent_names[5] = "audiopll_pmcck";
- 	for (i = 0; i < ARRAY_SIZE(sama5d2_gck); i++) {
- 		hw = at91_clk_register_generated(regmap, &pmc_pcr_lock,
---- a/drivers/clk/at91/sama5d3.c
-+++ b/drivers/clk/at91/sama5d3.c
-@@ -7,6 +7,8 @@
- 
- #include "pmc.h"
- 
-+static DEFINE_SPINLOCK(mck_lock);
-+
- static const struct clk_master_characteristics mck_characteristics = {
- 	.output = { .min = 0, .max = 166000000 },
- 	.divisors = { 1, 2, 4, 3 },
-@@ -40,14 +42,14 @@ static const struct {
- 	char *p;
- 	u8 id;
- } sama5d3_systemck[] = {
--	{ .n = "ddrck", .p = "masterck", .id = 2 },
--	{ .n = "lcdck", .p = "masterck", .id = 3 },
--	{ .n = "smdck", .p = "smdclk",   .id = 4 },
--	{ .n = "uhpck", .p = "usbck",    .id = 6 },
--	{ .n = "udpck", .p = "usbck",    .id = 7 },
--	{ .n = "pck0",  .p = "prog0",    .id = 8 },
--	{ .n = "pck1",  .p = "prog1",    .id = 9 },
--	{ .n = "pck2",  .p = "prog2",    .id = 10 },
-+	{ .n = "ddrck", .p = "masterck_div", .id = 2 },
-+	{ .n = "lcdck", .p = "masterck_div", .id = 3 },
-+	{ .n = "smdck", .p = "smdclk",       .id = 4 },
-+	{ .n = "uhpck", .p = "usbck",        .id = 6 },
-+	{ .n = "udpck", .p = "usbck",        .id = 7 },
-+	{ .n = "pck0",  .p = "prog0",        .id = 8 },
-+	{ .n = "pck1",  .p = "prog1",        .id = 9 },
-+	{ .n = "pck2",  .p = "prog2",        .id = 10 },
- };
- 
- static const struct {
-@@ -170,9 +172,19 @@ static void __init sama5d3_pmc_setup(str
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "utmick";
--	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
--				      &at91sam9x5_master_layout,
--				      &mck_characteristics);
-+	hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
-+					   parent_names,
-+					   &at91sam9x5_master_layout,
-+					   &mck_characteristics, &mck_lock,
-+					   CLK_SET_RATE_GATE, INT_MIN);
-+	if (IS_ERR(hw))
-+		goto err_free;
-+
-+	hw = at91_clk_register_master_div(regmap, "masterck_div",
-+					  "masterck_pres",
-+					  &at91sam9x5_master_layout,
-+					  &mck_characteristics, &mck_lock,
-+					  CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -192,7 +204,7 @@ static void __init sama5d3_pmc_setup(str
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "utmick";
--	parent_names[4] = "masterck";
-+	parent_names[4] = "masterck_div";
- 	for (i = 0; i < 3; i++) {
- 		char name[6];
- 
-@@ -222,7 +234,7 @@ static void __init sama5d3_pmc_setup(str
- 		hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
- 							 &sama5d3_pcr_layout,
- 							 sama5d3_periphck[i].n,
--							 "masterck",
-+							 "masterck_div",
- 							 sama5d3_periphck[i].id,
- 							 &sama5d3_periphck[i].r,
- 							 INT_MIN);
---- a/drivers/clk/at91/sama5d4.c
-+++ b/drivers/clk/at91/sama5d4.c
-@@ -7,6 +7,8 @@
- 
- #include "pmc.h"
- 
-+static DEFINE_SPINLOCK(mck_lock);
-+
- static const struct clk_master_characteristics mck_characteristics = {
- 	.output = { .min = 125000000, .max = 200000000 },
- 	.divisors = { 1, 2, 4, 3 },
-@@ -39,14 +41,14 @@ static const struct {
- 	char *p;
- 	u8 id;
- } sama5d4_systemck[] = {
--	{ .n = "ddrck", .p = "masterck", .id = 2 },
--	{ .n = "lcdck", .p = "masterck", .id = 3 },
--	{ .n = "smdck", .p = "smdclk",   .id = 4 },
--	{ .n = "uhpck", .p = "usbck",    .id = 6 },
--	{ .n = "udpck", .p = "usbck",    .id = 7 },
--	{ .n = "pck0",  .p = "prog0",    .id = 8 },
--	{ .n = "pck1",  .p = "prog1",    .id = 9 },
--	{ .n = "pck2",  .p = "prog2",    .id = 10 },
-+	{ .n = "ddrck", .p = "masterck_div", .id = 2 },
-+	{ .n = "lcdck", .p = "masterck_div", .id = 3 },
-+	{ .n = "smdck", .p = "smdclk",       .id = 4 },
-+	{ .n = "uhpck", .p = "usbck",        .id = 6 },
-+	{ .n = "udpck", .p = "usbck",        .id = 7 },
-+	{ .n = "pck0",  .p = "prog0",        .id = 8 },
-+	{ .n = "pck1",  .p = "prog1",        .id = 9 },
-+	{ .n = "pck2",  .p = "prog2",        .id = 10 },
- };
- 
- static const struct {
-@@ -185,15 +187,25 @@ static void __init sama5d4_pmc_setup(str
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "utmick";
--	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
--				      &at91sam9x5_master_layout,
--				      &mck_characteristics);
-+	hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
-+					   parent_names,
-+					   &at91sam9x5_master_layout,
-+					   &mck_characteristics, &mck_lock,
-+					   CLK_SET_RATE_GATE, INT_MIN);
-+	if (IS_ERR(hw))
-+		goto err_free;
-+
-+	hw = at91_clk_register_master_div(regmap, "masterck_div",
-+					  "masterck_pres",
-+					  &at91sam9x5_master_layout,
-+					  &mck_characteristics, &mck_lock,
-+					  CLK_SET_RATE_GATE);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
- 	sama5d4_pmc->chws[PMC_MCK] = hw;
- 
--	hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck");
-+	hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck_div");
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -215,7 +227,7 @@ static void __init sama5d4_pmc_setup(str
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "plladivck";
- 	parent_names[3] = "utmick";
--	parent_names[4] = "masterck";
-+	parent_names[4] = "masterck_div";
- 	for (i = 0; i < 3; i++) {
- 		char name[6];
- 
-@@ -245,7 +257,7 @@ static void __init sama5d4_pmc_setup(str
- 		hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
- 							 &sama5d4_pcr_layout,
- 							 sama5d4_periphck[i].n,
--							 "masterck",
-+							 "masterck_div",
- 							 sama5d4_periphck[i].id,
- 							 &range, INT_MIN);
- 		if (IS_ERR(hw))
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -32,6 +32,7 @@
- 	} while (0)
- 
- static DEFINE_SPINLOCK(pmc_pll_lock);
-+static DEFINE_SPINLOCK(pmc_mck0_lock);
- static DEFINE_SPINLOCK(pmc_mckX_lock);
- 
- /**
-@@ -984,8 +985,16 @@ static void __init sama7g5_pmc_setup(str
- 	parent_names[1] = "mainck";
- 	parent_names[2] = "cpupll_divpmcck";
- 	parent_names[3] = "syspll_divpmcck";
--	hw = at91_clk_register_master(regmap, "mck0", 4, parent_names,
--				      &mck0_layout, &mck0_characteristics);
-+	hw = at91_clk_register_master_pres(regmap, "mck0_pres", 4, parent_names,
-+					   &mck0_layout, &mck0_characteristics,
-+					   &pmc_mck0_lock,
-+					   CLK_SET_RATE_PARENT, 0);
-+	if (IS_ERR(hw))
-+		goto err_free;
-+
-+	hw = at91_clk_register_master_div(regmap, "mck0_div", "mck0_pres",
-+					  &mck0_layout, &mck0_characteristics,
-+					  &pmc_mck0_lock, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
diff --git a/target/linux/at91/patches-5.10/111-clk-at91-sama7g5-register-cpu-clock.patch b/target/linux/at91/patches-5.10/111-clk-at91-sama7g5-register-cpu-clock.patch
deleted file mode 100644
index dc55e32027cf..000000000000
--- a/target/linux/at91/patches-5.10/111-clk-at91-sama7g5-register-cpu-clock.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 36e97c421dd9f866e31fe14bcb7af01334791890 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 19 Nov 2020 17:43:17 +0200
-Subject: [PATCH 111/247] clk: at91: sama7g5: register cpu clock
-
-Register CPU clock as being the master clock prescaler. This would
-be used by DVFS. The block schema of SAMA7G5's PMC contains also a divider
-between master clock prescaler and CPU (PMC_CPU_RATIO.RATIO) but the
-frequencies supported by SAMA7G5 could be directly received from
-CPUPLL + master clock prescaler and the extra divider would do no work in
-case it would be enabled.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605800597-16720-12-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/sama7g5.c       | 13 ++++++-------
- include/dt-bindings/clock/at91.h |  1 +
- 2 files changed, 7 insertions(+), 7 deletions(-)
-
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -904,7 +904,7 @@ static void __init sama7g5_pmc_setup(str
- 	if (IS_ERR(regmap))
- 		return;
- 
--	sama7g5_pmc = pmc_data_allocate(PMC_ETHPLL + 1,
-+	sama7g5_pmc = pmc_data_allocate(PMC_CPU + 1,
- 					nck(sama7g5_systemck),
- 					nck(sama7g5_periphck),
- 					nck(sama7g5_gck), 8);
-@@ -981,18 +981,17 @@ static void __init sama7g5_pmc_setup(str
- 		}
- 	}
- 
--	parent_names[0] = md_slck_name;
--	parent_names[1] = "mainck";
--	parent_names[2] = "cpupll_divpmcck";
--	parent_names[3] = "syspll_divpmcck";
--	hw = at91_clk_register_master_pres(regmap, "mck0_pres", 4, parent_names,
-+	parent_names[0] = "cpupll_divpmcck";
-+	hw = at91_clk_register_master_pres(regmap, "cpuck", 1, parent_names,
- 					   &mck0_layout, &mck0_characteristics,
- 					   &pmc_mck0_lock,
- 					   CLK_SET_RATE_PARENT, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
--	hw = at91_clk_register_master_div(regmap, "mck0_div", "mck0_pres",
-+	sama7g5_pmc->chws[PMC_CPU] = hw;
-+
-+	hw = at91_clk_register_master_div(regmap, "mck0", "cpuck",
- 					  &mck0_layout, &mck0_characteristics,
- 					  &pmc_mck0_lock, 0);
- 	if (IS_ERR(hw))
---- a/include/dt-bindings/clock/at91.h
-+++ b/include/dt-bindings/clock/at91.h
-@@ -34,6 +34,7 @@
- #define PMC_AUDIOPMCPLL		(PMC_MAIN + 6)
- #define PMC_AUDIOIOPLL		(PMC_MAIN + 7)
- #define PMC_ETHPLL		(PMC_MAIN + 8)
-+#define PMC_CPU			(PMC_MAIN + 9)
- 
- #ifndef AT91_PMC_MOSCS
- #define AT91_PMC_MOSCS		0		/* MOSCS Flag */
diff --git a/target/linux/at91/patches-5.10/112-clk-at91-Fix-the-declaration-of-the-clocks.patch b/target/linux/at91/patches-5.10/112-clk-at91-Fix-the-declaration-of-the-clocks.patch
deleted file mode 100644
index e989ed207ebf..000000000000
--- a/target/linux/at91/patches-5.10/112-clk-at91-Fix-the-declaration-of-the-clocks.patch
+++ /dev/null
@@ -1,181 +0,0 @@
-From 5a25e2437af0db535b17da352fb16680a8dfdeda Mon Sep 17 00:00:00 2001
-From: Tudor Ambarus <tudor.ambarus@microchip.com>
-Date: Wed, 3 Feb 2021 17:43:32 +0200
-Subject: [PATCH 112/247] clk: at91: Fix the declaration of the clocks
-
-These are all "early clocks" that require initialization just at
-of_clk_init() time. Use CLK_OF_DECLARE() to declare them.
-
-This also fixes a problem that was spotted when fw_devlink was
-set to 'on' by default: the boards failed to boot. The reason is
-that CLK_OF_DECLARE_DRIVER() clears the OF_POPULATED and causes
-the consumers of the clock to be postponed by fw_devlink until
-the second initialization routine of the clock has been completed.
-One of the consumers of the clock is the timer, which is used as a
-clocksource, and needs the clock initialized early. Postponing the
-timers caused the fail at boot.
-
-Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
-Link: https://lore.kernel.org/r/20210203154332.470587-1-tudor.ambarus@microchip.com
-Acked-by: Saravana Kannan <saravanak@google.com>
-Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/at91rm9200.c  |  3 +--
- drivers/clk/at91/at91sam9260.c | 16 ++++++++--------
- drivers/clk/at91/at91sam9g45.c |  3 +--
- drivers/clk/at91/at91sam9n12.c |  3 +--
- drivers/clk/at91/at91sam9rl.c  |  3 ++-
- drivers/clk/at91/at91sam9x5.c  | 20 ++++++++++----------
- drivers/clk/at91/sama5d2.c     |  3 ++-
- drivers/clk/at91/sama5d3.c     |  2 +-
- drivers/clk/at91/sama5d4.c     |  3 ++-
- 9 files changed, 28 insertions(+), 28 deletions(-)
-
---- a/drivers/clk/at91/at91rm9200.c
-+++ b/drivers/clk/at91/at91rm9200.c
-@@ -215,5 +215,4 @@ err_free:
-  * deferring properly. Once this is fixed, this can be switched to a platform
-  * driver.
-  */
--CLK_OF_DECLARE_DRIVER(at91rm9200_pmc, "atmel,at91rm9200-pmc",
--		      at91rm9200_pmc_setup);
-+CLK_OF_DECLARE(at91rm9200_pmc, "atmel,at91rm9200-pmc", at91rm9200_pmc_setup);
---- a/drivers/clk/at91/at91sam9260.c
-+++ b/drivers/clk/at91/at91sam9260.c
-@@ -491,26 +491,26 @@ static void __init at91sam9260_pmc_setup
- {
- 	at91sam926x_pmc_setup(np, &at91sam9260_data);
- }
--CLK_OF_DECLARE_DRIVER(at91sam9260_pmc, "atmel,at91sam9260-pmc",
--		      at91sam9260_pmc_setup);
-+
-+CLK_OF_DECLARE(at91sam9260_pmc, "atmel,at91sam9260-pmc", at91sam9260_pmc_setup);
- 
- static void __init at91sam9261_pmc_setup(struct device_node *np)
- {
- 	at91sam926x_pmc_setup(np, &at91sam9261_data);
- }
--CLK_OF_DECLARE_DRIVER(at91sam9261_pmc, "atmel,at91sam9261-pmc",
--		      at91sam9261_pmc_setup);
-+
-+CLK_OF_DECLARE(at91sam9261_pmc, "atmel,at91sam9261-pmc", at91sam9261_pmc_setup);
- 
- static void __init at91sam9263_pmc_setup(struct device_node *np)
- {
- 	at91sam926x_pmc_setup(np, &at91sam9263_data);
- }
--CLK_OF_DECLARE_DRIVER(at91sam9263_pmc, "atmel,at91sam9263-pmc",
--		      at91sam9263_pmc_setup);
-+
-+CLK_OF_DECLARE(at91sam9263_pmc, "atmel,at91sam9263-pmc", at91sam9263_pmc_setup);
- 
- static void __init at91sam9g20_pmc_setup(struct device_node *np)
- {
- 	at91sam926x_pmc_setup(np, &at91sam9g20_data);
- }
--CLK_OF_DECLARE_DRIVER(at91sam9g20_pmc, "atmel,at91sam9g20-pmc",
--		      at91sam9g20_pmc_setup);
-+
-+CLK_OF_DECLARE(at91sam9g20_pmc, "atmel,at91sam9g20-pmc", at91sam9g20_pmc_setup);
---- a/drivers/clk/at91/at91sam9g45.c
-+++ b/drivers/clk/at91/at91sam9g45.c
-@@ -228,5 +228,4 @@ err_free:
-  * The TCB is used as the clocksource so its clock is needed early. This means
-  * this can't be a platform driver.
-  */
--CLK_OF_DECLARE_DRIVER(at91sam9g45_pmc, "atmel,at91sam9g45-pmc",
--		      at91sam9g45_pmc_setup);
-+CLK_OF_DECLARE(at91sam9g45_pmc, "atmel,at91sam9g45-pmc", at91sam9g45_pmc_setup);
---- a/drivers/clk/at91/at91sam9n12.c
-+++ b/drivers/clk/at91/at91sam9n12.c
-@@ -255,5 +255,4 @@ err_free:
-  * The TCB is used as the clocksource so its clock is needed early. This means
-  * this can't be a platform driver.
-  */
--CLK_OF_DECLARE_DRIVER(at91sam9n12_pmc, "atmel,at91sam9n12-pmc",
--		      at91sam9n12_pmc_setup);
-+CLK_OF_DECLARE(at91sam9n12_pmc, "atmel,at91sam9n12-pmc", at91sam9n12_pmc_setup);
---- a/drivers/clk/at91/at91sam9rl.c
-+++ b/drivers/clk/at91/at91sam9rl.c
-@@ -186,4 +186,5 @@ static void __init at91sam9rl_pmc_setup(
- err_free:
- 	kfree(at91sam9rl_pmc);
- }
--CLK_OF_DECLARE_DRIVER(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
-+
-+CLK_OF_DECLARE(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
---- a/drivers/clk/at91/at91sam9x5.c
-+++ b/drivers/clk/at91/at91sam9x5.c
-@@ -302,33 +302,33 @@ static void __init at91sam9g15_pmc_setup
- {
- 	at91sam9x5_pmc_setup(np, at91sam9g15_periphck, true);
- }
--CLK_OF_DECLARE_DRIVER(at91sam9g15_pmc, "atmel,at91sam9g15-pmc",
--		      at91sam9g15_pmc_setup);
-+
-+CLK_OF_DECLARE(at91sam9g15_pmc, "atmel,at91sam9g15-pmc", at91sam9g15_pmc_setup);
- 
- static void __init at91sam9g25_pmc_setup(struct device_node *np)
- {
- 	at91sam9x5_pmc_setup(np, at91sam9g25_periphck, false);
- }
--CLK_OF_DECLARE_DRIVER(at91sam9g25_pmc, "atmel,at91sam9g25-pmc",
--		      at91sam9g25_pmc_setup);
-+
-+CLK_OF_DECLARE(at91sam9g25_pmc, "atmel,at91sam9g25-pmc", at91sam9g25_pmc_setup);
- 
- static void __init at91sam9g35_pmc_setup(struct device_node *np)
- {
- 	at91sam9x5_pmc_setup(np, at91sam9g35_periphck, true);
- }
--CLK_OF_DECLARE_DRIVER(at91sam9g35_pmc, "atmel,at91sam9g35-pmc",
--		      at91sam9g35_pmc_setup);
-+
-+CLK_OF_DECLARE(at91sam9g35_pmc, "atmel,at91sam9g35-pmc", at91sam9g35_pmc_setup);
- 
- static void __init at91sam9x25_pmc_setup(struct device_node *np)
- {
- 	at91sam9x5_pmc_setup(np, at91sam9x25_periphck, false);
- }
--CLK_OF_DECLARE_DRIVER(at91sam9x25_pmc, "atmel,at91sam9x25-pmc",
--		      at91sam9x25_pmc_setup);
-+
-+CLK_OF_DECLARE(at91sam9x25_pmc, "atmel,at91sam9x25-pmc", at91sam9x25_pmc_setup);
- 
- static void __init at91sam9x35_pmc_setup(struct device_node *np)
- {
- 	at91sam9x5_pmc_setup(np, at91sam9x35_periphck, true);
- }
--CLK_OF_DECLARE_DRIVER(at91sam9x35_pmc, "atmel,at91sam9x35-pmc",
--		      at91sam9x35_pmc_setup);
-+
-+CLK_OF_DECLARE(at91sam9x35_pmc, "atmel,at91sam9x35-pmc", at91sam9x35_pmc_setup);
---- a/drivers/clk/at91/sama5d2.c
-+++ b/drivers/clk/at91/sama5d2.c
-@@ -372,4 +372,5 @@ static void __init sama5d2_pmc_setup(str
- err_free:
- 	kfree(sama5d2_pmc);
- }
--CLK_OF_DECLARE_DRIVER(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
-+
-+CLK_OF_DECLARE(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
---- a/drivers/clk/at91/sama5d3.c
-+++ b/drivers/clk/at91/sama5d3.c
-@@ -255,4 +255,4 @@ err_free:
-  * The TCB is used as the clocksource so its clock is needed early. This means
-  * this can't be a platform driver.
-  */
--CLK_OF_DECLARE_DRIVER(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
-+CLK_OF_DECLARE(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
---- a/drivers/clk/at91/sama5d4.c
-+++ b/drivers/clk/at91/sama5d4.c
-@@ -286,4 +286,5 @@ static void __init sama5d4_pmc_setup(str
- err_free:
- 	kfree(sama5d4_pmc);
- }
--CLK_OF_DECLARE_DRIVER(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
-+
-+CLK_OF_DECLARE(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
diff --git a/target/linux/at91/patches-5.10/113-clk-at91-Trivial-typo-fixes-in-the-file-sama7g5.c.patch b/target/linux/at91/patches-5.10/113-clk-at91-Trivial-typo-fixes-in-the-file-sama7g5.c.patch
deleted file mode 100644
index f3ebee10fedb..000000000000
--- a/target/linux/at91/patches-5.10/113-clk-at91-Trivial-typo-fixes-in-the-file-sama7g5.c.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 268b36c42b7d1e480dd56ecfec626a46f4b5975e Mon Sep 17 00:00:00 2001
-From: Bhaskar Chowdhury <unixbhaskar@gmail.com>
-Date: Sat, 13 Mar 2021 11:02:22 +0530
-Subject: [PATCH 113/247] clk: at91: Trivial typo fixes in the file sama7g5.c
-
-s/critial/critical/  ......two different places
-s/parrent/parent/
-
-Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
-Link: https://lore.kernel.org/r/20210313053222.14706-1-unixbhaskar@gmail.com
-Acked-by: Randy Dunlap <rdunlap@infradead.org>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/sama7g5.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -166,7 +166,7 @@ static const struct {
- 		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_FRAC,
- 		   /*
--		    * This feeds syspll_divpmcck which may feed critial parts
-+		    * This feeds syspll_divpmcck which may feed critical parts
- 		    * of the systems like timers. Therefore it should not be
- 		    * disabled.
- 		    */
-@@ -178,7 +178,7 @@ static const struct {
- 		  .c = &pll_characteristics,
- 		  .t = PLL_TYPE_DIV,
- 		   /*
--		    * This may feed critial parts of the systems like timers.
-+		    * This may feed critical parts of the systems like timers.
- 		    * Therefore it should not be disabled.
- 		    */
- 		  .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE,
-@@ -455,7 +455,7 @@ static const struct {
-  * @pp:			PLL parents
-  * @pp_mux_table:	PLL parents mux table
-  * @r:			clock output range
-- * @pp_chg_id:		id in parrent array of changeable PLL parent
-+ * @pp_chg_id:		id in parent array of changeable PLL parent
-  * @pp_count:		PLL parents count
-  * @id:			clock id
-  */
diff --git a/target/linux/at91/patches-5.10/114-clk-at91-sama7g5-remove-all-kernel-doc-kernel-doc-wa.patch b/target/linux/at91/patches-5.10/114-clk-at91-sama7g5-remove-all-kernel-doc-kernel-doc-wa.patch
deleted file mode 100644
index a9ceda533bc5..000000000000
--- a/target/linux/at91/patches-5.10/114-clk-at91-sama7g5-remove-all-kernel-doc-kernel-doc-wa.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 9997227090cf529675aeb775585ec9f6c2f0f131 Mon Sep 17 00:00:00 2001
-From: Randy Dunlap <rdunlap@infradead.org>
-Date: Thu, 19 Aug 2021 15:32:37 -0700
-Subject: [PATCH 114/247] clk: at91: sama7g5: remove all kernel-doc &
- kernel-doc warnings
-
-Remove all "/**" kernel-doc markers from sama7g5.c since they are
-all internal to this driver source file only.
-This eliminates 14 warnings that were reported by the kernel test robot.
-
-Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
-Reported-by: kernel test robot <lkp@intel.com>
-Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
-Cc: Michael Turquette <mturquette@baylibre.com>
-Cc: Stephen Boyd <sboyd@kernel.org>
-Cc: Eugen Hristev <eugen.hristev@microchip.com>
-Cc: linux-clk@vger.kernel.org
-Cc: linux-arm-kernel@lists.infradead.org
-Link: https://lore.kernel.org/r/20210819223237.20115-1-rdunlap@infradead.org
-Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/sama7g5.c | 14 +++++++-------
- 1 file changed, 7 insertions(+), 7 deletions(-)
-
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -35,7 +35,7 @@ static DEFINE_SPINLOCK(pmc_pll_lock);
- static DEFINE_SPINLOCK(pmc_mck0_lock);
- static DEFINE_SPINLOCK(pmc_mckX_lock);
- 
--/**
-+/*
-  * PLL clocks identifiers
-  * @PLL_ID_CPU:		CPU PLL identifier
-  * @PLL_ID_SYS:		System PLL identifier
-@@ -56,7 +56,7 @@ enum pll_ids {
- 	PLL_ID_MAX,
- };
- 
--/**
-+/*
-  * PLL type identifiers
-  * @PLL_TYPE_FRAC:	fractional PLL identifier
-  * @PLL_TYPE_DIV:	divider PLL identifier
-@@ -118,7 +118,7 @@ static const struct clk_pll_characterist
- 	.output = pll_outputs,
- };
- 
--/**
-+/*
-  * PLL clocks description
-  * @n:		clock name
-  * @p:		clock parent
-@@ -285,7 +285,7 @@ static const struct {
- 	},
- };
- 
--/**
-+/*
-  * Master clock (MCK[1..4]) description
-  * @n:			clock name
-  * @ep:			extra parents names array
-@@ -337,7 +337,7 @@ static const struct {
- 	  .c = 1, },
- };
- 
--/**
-+/*
-  * System clock description
-  * @n:	clock name
-  * @p:	clock parent name
-@@ -361,7 +361,7 @@ static const struct {
- /* Mux table for programmable clocks. */
- static u32 sama7g5_prog_mux_table[] = { 0, 1, 2, 5, 6, 7, 8, 9, 10, };
- 
--/**
-+/*
-  * Peripheral clock description
-  * @n:		clock name
-  * @p:		clock parent name
-@@ -449,7 +449,7 @@ static const struct {
- 	{ .n = "uhphs_clk",	.p = "mck1", .id = 106, },
- };
- 
--/**
-+/*
-  * Generic clock description
-  * @n:			clock name
-  * @pp:			PLL parents
diff --git a/target/linux/at91/patches-5.10/115-net-macb-add-userio-bits-as-platform-configuration.patch b/target/linux/at91/patches-5.10/115-net-macb-add-userio-bits-as-platform-configuration.patch
deleted file mode 100644
index e474590053fc..000000000000
--- a/target/linux/at91/patches-5.10/115-net-macb-add-userio-bits-as-platform-configuration.patch
+++ /dev/null
@@ -1,179 +0,0 @@
-From 89f37ac2780d113d3c17d329726c0e92a1400744 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 9 Dec 2020 15:03:32 +0200
-Subject: [PATCH 115/247] net: macb: add userio bits as platform configuration
-
-This is necessary for SAMA7G5 as it uses different values for
-PHY interface and also introduces hdfctlen bit.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/cadence/macb.h      | 10 +++++++++
- drivers/net/ethernet/cadence/macb_main.c | 28 ++++++++++++++++++++----
- 2 files changed, 34 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/cadence/macb.h
-+++ b/drivers/net/ethernet/cadence/macb.h
-@@ -1104,6 +1104,14 @@ struct macb_pm_data {
- 	u32 usrio;
- };
- 
-+struct macb_usrio_config {
-+	u32 mii;
-+	u32 rmii;
-+	u32 rgmii;
-+	u32 refclk;
-+	u32 hdfctlen;
-+};
-+
- struct macb_config {
- 	u32			caps;
- 	unsigned int		dma_burst_length;
-@@ -1112,6 +1120,7 @@ struct macb_config {
- 			    struct clk **rx_clk, struct clk **tsu_clk);
- 	int	(*init)(struct platform_device *pdev);
- 	int	jumbo_max_len;
-+	const struct macb_usrio_config *usrio;
- };
- 
- struct tsu_incr {
-@@ -1244,6 +1253,7 @@ struct macb {
- 	u32	rx_intr_mask;
- 
- 	struct macb_pm_data pm_data;
-+	const struct macb_usrio_config *usrio;
- };
- 
- #ifdef CONFIG_MACB_USE_HWSTAMP
---- a/drivers/net/ethernet/cadence/macb_main.c
-+++ b/drivers/net/ethernet/cadence/macb_main.c
-@@ -3828,15 +3828,15 @@ static int macb_init(struct platform_dev
- 	if (!(bp->caps & MACB_CAPS_USRIO_DISABLED)) {
- 		val = 0;
- 		if (phy_interface_mode_is_rgmii(bp->phy_interface))
--			val = GEM_BIT(RGMII);
-+			val = bp->usrio->rgmii;
- 		else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII &&
- 			 (bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII))
--			val = MACB_BIT(RMII);
-+			val = bp->usrio->rmii;
- 		else if (!(bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII))
--			val = MACB_BIT(MII);
-+			val = bp->usrio->mii;
- 
- 		if (bp->caps & MACB_CAPS_USRIO_HAS_CLKEN)
--			val |= MACB_BIT(CLKEN);
-+			val |= bp->usrio->refclk;
- 
- 		macb_or_gem_writel(bp, USRIO, val);
- 	}
-@@ -4354,6 +4354,13 @@ static int fu540_c000_init(struct platfo
- 	return macb_init(pdev);
- }
- 
-+static const struct macb_usrio_config macb_default_usrio = {
-+	.mii = MACB_BIT(MII),
-+	.rmii = MACB_BIT(RMII),
-+	.rgmii = GEM_BIT(RGMII),
-+	.refclk = MACB_BIT(CLKEN),
-+};
-+
- static const struct macb_config fu540_c000_config = {
- 	.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO |
- 		MACB_CAPS_GEM_HAS_PTP,
-@@ -4361,12 +4368,14 @@ static const struct macb_config fu540_c0
- 	.clk_init = fu540_c000_clk_init,
- 	.init = fu540_c000_init,
- 	.jumbo_max_len = 10240,
-+	.usrio = &macb_default_usrio,
- };
- 
- static const struct macb_config at91sam9260_config = {
- 	.caps = MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII,
- 	.clk_init = macb_clk_init,
- 	.init = macb_init,
-+	.usrio = &macb_default_usrio,
- };
- 
- static const struct macb_config sama5d3macb_config = {
-@@ -4374,6 +4383,7 @@ static const struct macb_config sama5d3m
- 	      | MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII,
- 	.clk_init = macb_clk_init,
- 	.init = macb_init,
-+	.usrio = &macb_default_usrio,
- };
- 
- static const struct macb_config pc302gem_config = {
-@@ -4381,6 +4391,7 @@ static const struct macb_config pc302gem
- 	.dma_burst_length = 16,
- 	.clk_init = macb_clk_init,
- 	.init = macb_init,
-+	.usrio = &macb_default_usrio,
- };
- 
- static const struct macb_config sama5d2_config = {
-@@ -4388,6 +4399,7 @@ static const struct macb_config sama5d2_
- 	.dma_burst_length = 16,
- 	.clk_init = macb_clk_init,
- 	.init = macb_init,
-+	.usrio = &macb_default_usrio,
- };
- 
- static const struct macb_config sama5d3_config = {
-@@ -4397,6 +4409,7 @@ static const struct macb_config sama5d3_
- 	.clk_init = macb_clk_init,
- 	.init = macb_init,
- 	.jumbo_max_len = 10240,
-+	.usrio = &macb_default_usrio,
- };
- 
- static const struct macb_config sama5d4_config = {
-@@ -4404,18 +4417,21 @@ static const struct macb_config sama5d4_
- 	.dma_burst_length = 4,
- 	.clk_init = macb_clk_init,
- 	.init = macb_init,
-+	.usrio = &macb_default_usrio,
- };
- 
- static const struct macb_config emac_config = {
- 	.caps = MACB_CAPS_NEEDS_RSTONUBR | MACB_CAPS_MACB_IS_EMAC,
- 	.clk_init = at91ether_clk_init,
- 	.init = at91ether_init,
-+	.usrio = &macb_default_usrio,
- };
- 
- static const struct macb_config np4_config = {
- 	.caps = MACB_CAPS_USRIO_DISABLED,
- 	.clk_init = macb_clk_init,
- 	.init = macb_init,
-+	.usrio = &macb_default_usrio,
- };
- 
- static const struct macb_config zynqmp_config = {
-@@ -4426,6 +4442,7 @@ static const struct macb_config zynqmp_c
- 	.clk_init = macb_clk_init,
- 	.init = macb_init,
- 	.jumbo_max_len = 10240,
-+	.usrio = &macb_default_usrio,
- };
- 
- static const struct macb_config zynq_config = {
-@@ -4434,6 +4451,7 @@ static const struct macb_config zynq_con
- 	.dma_burst_length = 16,
- 	.clk_init = macb_clk_init,
- 	.init = macb_init,
-+	.usrio = &macb_default_usrio,
- };
- 
- static const struct of_device_id macb_dt_ids[] = {
-@@ -4554,6 +4572,8 @@ static int macb_probe(struct platform_de
- 		bp->wol |= MACB_WOL_HAS_MAGIC_PACKET;
- 	device_set_wakeup_capable(&pdev->dev, bp->wol & MACB_WOL_HAS_MAGIC_PACKET);
- 
-+	bp->usrio = macb_config->usrio;
-+
- 	spin_lock_init(&bp->lock);
- 
- 	/* setup capabilities */
diff --git a/target/linux/at91/patches-5.10/116-net-macb-add-capability-to-not-set-the-clock-rate.patch b/target/linux/at91/patches-5.10/116-net-macb-add-capability-to-not-set-the-clock-rate.patch
deleted file mode 100644
index 87dde7ef60c4..000000000000
--- a/target/linux/at91/patches-5.10/116-net-macb-add-capability-to-not-set-the-clock-rate.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 1b15259551b701f416aa024050a2e619860bd0d8 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 9 Dec 2020 15:03:33 +0200
-Subject: [PATCH 116/247] net: macb: add capability to not set the clock rate
-
-SAMA7G5's ethernet IPs TX clock could be provided by its generic clock or
-by the external clock provided by the PHY. The internal IP logic divides
-properly this clock depending on the link speed. The patch adds a new
-capability so that macb_set_tx_clock() to not be called for IPs having
-this capability (the clock rate, in case of generic clock, is set at the
-boot time via device tree and the driver only enables it).
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/cadence/macb.h      |  1 +
- drivers/net/ethernet/cadence/macb_main.c | 18 +++++++++---------
- 2 files changed, 10 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/cadence/macb.h
-+++ b/drivers/net/ethernet/cadence/macb.h
-@@ -658,6 +658,7 @@
- #define MACB_CAPS_GEM_HAS_PTP			0x00000040
- #define MACB_CAPS_BD_RD_PREFETCH		0x00000080
- #define MACB_CAPS_NEEDS_RSTONUBR		0x00000100
-+#define MACB_CAPS_CLK_HW_CHG			0x04000000
- #define MACB_CAPS_MACB_IS_EMAC			0x08000000
- #define MACB_CAPS_FIFO_MODE			0x10000000
- #define MACB_CAPS_GIGABIT_MODE_AVAILABLE	0x20000000
---- a/drivers/net/ethernet/cadence/macb_main.c
-+++ b/drivers/net/ethernet/cadence/macb_main.c
-@@ -457,15 +457,14 @@ static void macb_init_buffers(struct mac
- 
- /**
-  * macb_set_tx_clk() - Set a clock to a new frequency
-- * @clk:	Pointer to the clock to change
-+ * @bp:		pointer to struct macb
-  * @speed:	New frequency in Hz
-- * @dev:	Pointer to the struct net_device
-  */
--static void macb_set_tx_clk(struct clk *clk, int speed, struct net_device *dev)
-+static void macb_set_tx_clk(struct macb *bp, int speed)
- {
- 	long ferr, rate, rate_rounded;
- 
--	if (!clk)
-+	if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
- 		return;
- 
- 	switch (speed) {
-@@ -482,7 +481,7 @@ static void macb_set_tx_clk(struct clk *
- 		return;
- 	}
- 
--	rate_rounded = clk_round_rate(clk, rate);
-+	rate_rounded = clk_round_rate(bp->tx_clk, rate);
- 	if (rate_rounded < 0)
- 		return;
- 
-@@ -492,11 +491,12 @@ static void macb_set_tx_clk(struct clk *
- 	ferr = abs(rate_rounded - rate);
- 	ferr = DIV_ROUND_UP(ferr, rate / 100000);
- 	if (ferr > 5)
--		netdev_warn(dev, "unable to generate target frequency: %ld Hz\n",
-+		netdev_warn(bp->dev,
-+			    "unable to generate target frequency: %ld Hz\n",
- 			    rate);
- 
--	if (clk_set_rate(clk, rate_rounded))
--		netdev_err(dev, "adjusting tx_clk failed.\n");
-+	if (clk_set_rate(bp->tx_clk, rate_rounded))
-+		netdev_err(bp->dev, "adjusting tx_clk failed.\n");
- }
- 
- static void macb_validate(struct phylink_config *config,
-@@ -649,7 +649,7 @@ static void macb_mac_link_up(struct phyl
- 		if (rx_pause)
- 			ctrl |= MACB_BIT(PAE);
- 
--		macb_set_tx_clk(bp->tx_clk, speed, ndev);
-+		macb_set_tx_clk(bp, speed);
- 
- 		/* Initialize rings & buffers as clearing MACB_BIT(TE) in link down
- 		 * cleared the pipeline and control registers.
diff --git a/target/linux/at91/patches-5.10/117-net-macb-add-function-to-disable-all-macb-clocks.patch b/target/linux/at91/patches-5.10/117-net-macb-add-function-to-disable-all-macb-clocks.patch
deleted file mode 100644
index 337343340cce..000000000000
--- a/target/linux/at91/patches-5.10/117-net-macb-add-function-to-disable-all-macb-clocks.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 935d9aae15ee245a1bc6e322cbef02566a8996cc Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 9 Dec 2020 15:03:34 +0200
-Subject: [PATCH 117/247] net: macb: add function to disable all macb clocks
-
-Add function to disable all macb clocks.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/cadence/macb_main.c | 38 +++++++++++++-----------
- 1 file changed, 21 insertions(+), 17 deletions(-)
-
---- a/drivers/net/ethernet/cadence/macb_main.c
-+++ b/drivers/net/ethernet/cadence/macb_main.c
-@@ -3603,6 +3603,20 @@ static void macb_probe_queues(void __iom
- 	*num_queues = hweight32(*queue_mask);
- }
- 
-+static void macb_clks_disable(struct clk *pclk, struct clk *hclk, struct clk *tx_clk,
-+			      struct clk *rx_clk, struct clk *tsu_clk)
-+{
-+	struct clk_bulk_data clks[] = {
-+		{ .clk = tsu_clk, },
-+		{ .clk = rx_clk, },
-+		{ .clk = pclk, },
-+		{ .clk = hclk, },
-+		{ .clk = tx_clk },
-+	};
-+
-+	clk_bulk_disable_unprepare(ARRAY_SIZE(clks), clks);
-+}
-+
- static int macb_clk_init(struct platform_device *pdev, struct clk **pclk,
- 			 struct clk **hclk, struct clk **tx_clk,
- 			 struct clk **rx_clk, struct clk **tsu_clk)
-@@ -4665,11 +4679,7 @@ err_out_free_netdev:
- 	free_netdev(dev);
- 
- err_disable_clocks:
--	clk_disable_unprepare(tx_clk);
--	clk_disable_unprepare(hclk);
--	clk_disable_unprepare(pclk);
--	clk_disable_unprepare(rx_clk);
--	clk_disable_unprepare(tsu_clk);
-+	macb_clks_disable(pclk, hclk, tx_clk, rx_clk, tsu_clk);
- 	pm_runtime_disable(&pdev->dev);
- 	pm_runtime_set_suspended(&pdev->dev);
- 	pm_runtime_dont_use_autosuspend(&pdev->dev);
-@@ -4694,11 +4704,8 @@ static int macb_remove(struct platform_d
- 		pm_runtime_disable(&pdev->dev);
- 		pm_runtime_dont_use_autosuspend(&pdev->dev);
- 		if (!pm_runtime_suspended(&pdev->dev)) {
--			clk_disable_unprepare(bp->tx_clk);
--			clk_disable_unprepare(bp->hclk);
--			clk_disable_unprepare(bp->pclk);
--			clk_disable_unprepare(bp->rx_clk);
--			clk_disable_unprepare(bp->tsu_clk);
-+			macb_clks_disable(bp->pclk, bp->hclk, bp->tx_clk,
-+					  bp->rx_clk, bp->tsu_clk);
- 			pm_runtime_set_suspended(&pdev->dev);
- 		}
- 		phylink_destroy(bp->phylink);
-@@ -4877,13 +4884,10 @@ static int __maybe_unused macb_runtime_s
- 	struct net_device *netdev = dev_get_drvdata(dev);
- 	struct macb *bp = netdev_priv(netdev);
- 
--	if (!(device_may_wakeup(dev))) {
--		clk_disable_unprepare(bp->tx_clk);
--		clk_disable_unprepare(bp->hclk);
--		clk_disable_unprepare(bp->pclk);
--		clk_disable_unprepare(bp->rx_clk);
--	}
--	clk_disable_unprepare(bp->tsu_clk);
-+	if (!(device_may_wakeup(dev)))
-+		macb_clks_disable(bp->pclk, bp->hclk, bp->tx_clk, bp->rx_clk, bp->tsu_clk);
-+	else
-+		macb_clks_disable(NULL, NULL, NULL, NULL, bp->tsu_clk);
- 
- 	return 0;
- }
diff --git a/target/linux/at91/patches-5.10/118-net-macb-unprepare-clocks-in-case-of-failure.patch b/target/linux/at91/patches-5.10/118-net-macb-unprepare-clocks-in-case-of-failure.patch
deleted file mode 100644
index c66d334f3a1b..000000000000
--- a/target/linux/at91/patches-5.10/118-net-macb-unprepare-clocks-in-case-of-failure.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 9692c07ee8bf8f68b74d553d861d092e33264781 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 9 Dec 2020 15:03:35 +0200
-Subject: [PATCH 118/247] net: macb: unprepare clocks in case of failure
-
-Unprepare clocks in case of any failure in fu540_c000_clk_init().
-
-Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000")
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/cadence/macb_main.c | 24 ++++++++++++++++++------
- 1 file changed, 18 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/cadence/macb_main.c
-+++ b/drivers/net/ethernet/cadence/macb_main.c
-@@ -4335,8 +4335,10 @@ static int fu540_c000_clk_init(struct pl
- 		return err;
- 
- 	mgmt = devm_kzalloc(&pdev->dev, sizeof(*mgmt), GFP_KERNEL);
--	if (!mgmt)
--		return -ENOMEM;
-+	if (!mgmt) {
-+		err = -ENOMEM;
-+		goto err_disable_clks;
-+	}
- 
- 	init.name = "sifive-gemgxl-mgmt";
- 	init.ops = &fu540_c000_ops;
-@@ -4347,16 +4349,26 @@ static int fu540_c000_clk_init(struct pl
- 	mgmt->hw.init = &init;
- 
- 	*tx_clk = devm_clk_register(&pdev->dev, &mgmt->hw);
--	if (IS_ERR(*tx_clk))
--		return PTR_ERR(*tx_clk);
-+	if (IS_ERR(*tx_clk)) {
-+		err = PTR_ERR(*tx_clk);
-+		goto err_disable_clks;
-+	}
- 
- 	err = clk_prepare_enable(*tx_clk);
--	if (err)
-+	if (err) {
- 		dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n", err);
--	else
-+		*tx_clk = NULL;
-+		goto err_disable_clks;
-+	} else {
- 		dev_info(&pdev->dev, "Registered clk switch '%s'\n", init.name);
-+	}
- 
- 	return 0;
-+
-+err_disable_clks:
-+	macb_clks_disable(*pclk, *hclk, *tx_clk, *rx_clk, *tsu_clk);
-+
-+	return err;
- }
- 
- static int fu540_c000_init(struct platform_device *pdev)
diff --git a/target/linux/at91/patches-5.10/119-net-macb-add-support-for-sama7g5-gem-interface.patch b/target/linux/at91/patches-5.10/119-net-macb-add-support-for-sama7g5-gem-interface.patch
deleted file mode 100644
index 78a222e657fc..000000000000
--- a/target/linux/at91/patches-5.10/119-net-macb-add-support-for-sama7g5-gem-interface.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 0085cd8576ceeaddeedf973b939b41ba96e3f77c Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 9 Dec 2020 15:03:38 +0200
-Subject: [PATCH 119/247] net: macb: add support for sama7g5 gem interface
-
-Add support for SAMA7G5 gigabit ethernet interface.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/cadence/macb_main.c | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/drivers/net/ethernet/cadence/macb_main.c
-+++ b/drivers/net/ethernet/cadence/macb_main.c
-@@ -4387,6 +4387,14 @@ static const struct macb_usrio_config ma
- 	.refclk = MACB_BIT(CLKEN),
- };
- 
-+static const struct macb_usrio_config sama7g5_usrio = {
-+	.mii = 0,
-+	.rmii = 1,
-+	.rgmii = 2,
-+	.refclk = BIT(2),
-+	.hdfctlen = BIT(6),
-+};
-+
- static const struct macb_config fu540_c000_config = {
- 	.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO |
- 		MACB_CAPS_GEM_HAS_PTP,
-@@ -4480,6 +4488,14 @@ static const struct macb_config zynq_con
- 	.usrio = &macb_default_usrio,
- };
- 
-+static const struct macb_config sama7g5_gem_config = {
-+	.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_CLK_HW_CHG,
-+	.dma_burst_length = 16,
-+	.clk_init = macb_clk_init,
-+	.init = macb_init,
-+	.usrio = &sama7g5_usrio,
-+};
-+
- static const struct of_device_id macb_dt_ids[] = {
- 	{ .compatible = "cdns,at32ap7000-macb" },
- 	{ .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config },
-@@ -4497,6 +4513,7 @@ static const struct of_device_id macb_dt
- 	{ .compatible = "cdns,zynqmp-gem", .data = &zynqmp_config},
- 	{ .compatible = "cdns,zynq-gem", .data = &zynq_config },
- 	{ .compatible = "sifive,fu540-c000-gem", .data = &fu540_c000_config },
-+	{ .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config },
- 	{ /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, macb_dt_ids);
diff --git a/target/linux/at91/patches-5.10/120-net-macb-add-support-for-sama7g5-emac-interface.patch b/target/linux/at91/patches-5.10/120-net-macb-add-support-for-sama7g5-emac-interface.patch
deleted file mode 100644
index 5711add94078..000000000000
--- a/target/linux/at91/patches-5.10/120-net-macb-add-support-for-sama7g5-emac-interface.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From a42f90357cfcfcf5cdade4594ad79a1eae633a9f Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 9 Dec 2020 15:03:39 +0200
-Subject: [PATCH 120/247] net: macb: add support for sama7g5 emac interface
-
-Add support for SAMA7G5 10/100Mbps interface.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/cadence/macb_main.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/ethernet/cadence/macb_main.c
-+++ b/drivers/net/ethernet/cadence/macb_main.c
-@@ -4496,6 +4496,14 @@ static const struct macb_config sama7g5_
- 	.usrio = &sama7g5_usrio,
- };
- 
-+static const struct macb_config sama7g5_emac_config = {
-+	.caps = MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII | MACB_CAPS_USRIO_HAS_CLKEN,
-+	.dma_burst_length = 16,
-+	.clk_init = macb_clk_init,
-+	.init = macb_init,
-+	.usrio = &sama7g5_usrio,
-+};
-+
- static const struct of_device_id macb_dt_ids[] = {
- 	{ .compatible = "cdns,at32ap7000-macb" },
- 	{ .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config },
-@@ -4514,6 +4522,7 @@ static const struct of_device_id macb_dt
- 	{ .compatible = "cdns,zynq-gem", .data = &zynq_config },
- 	{ .compatible = "sifive,fu540-c000-gem", .data = &fu540_c000_config },
- 	{ .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config },
-+	{ .compatible = "microchip,sama7g5-emac", .data = &sama7g5_emac_config },
- 	{ /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, macb_dt_ids);
diff --git a/target/linux/at91/patches-5.10/121-ASoC-pcm5102a-Make-codec-selectable.patch b/target/linux/at91/patches-5.10/121-ASoC-pcm5102a-Make-codec-selectable.patch
deleted file mode 100644
index 8c918fd77985..000000000000
--- a/target/linux/at91/patches-5.10/121-ASoC-pcm5102a-Make-codec-selectable.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 5ac0e1f5577b266543756521b1a749003b0f3686 Mon Sep 17 00:00:00 2001
-From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Date: Mon, 12 Oct 2020 17:19:11 +0300
-Subject: [PATCH 121/247] ASoC: pcm5102a: Make codec selectable
-
-The TI PCM5102A codec driver can be used with the generic sound card
-drivers, so it should be selectable. For example, with the addition
-of #sound-dai-cells = <0> property in DT, it can be used with simple/graph
-card drivers.
-
-Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Link: https://lore.kernel.org/r/20201012141911.3150996-1-codrin.ciubotariu@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/codecs/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/sound/soc/codecs/Kconfig
-+++ b/sound/soc/codecs/Kconfig
-@@ -1007,7 +1007,7 @@ config SND_SOC_PCM3168A_SPI
- 	select REGMAP_SPI
- 
- config SND_SOC_PCM5102A
--	tristate
-+	tristate "Texas Instruments PCM5102A CODEC"
- 
- config SND_SOC_PCM512x
- 	tristate
diff --git a/target/linux/at91/patches-5.10/122-ASoC-atmel-i2s-do-not-warn-if-muxclk-is-missing.patch b/target/linux/at91/patches-5.10/122-ASoC-atmel-i2s-do-not-warn-if-muxclk-is-missing.patch
deleted file mode 100644
index 978b68184e24..000000000000
--- a/target/linux/at91/patches-5.10/122-ASoC-atmel-i2s-do-not-warn-if-muxclk-is-missing.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From f4389949bf422fe04775c17b833100fa0e95ea68 Mon Sep 17 00:00:00 2001
-From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Date: Tue, 3 Nov 2020 12:05:54 +0200
-Subject: [PATCH 122/247] ASoC: atmel-i2s: do not warn if muxclk is missing
-
-Besides the fact that muxclk is optional, muxclk can be set using
-assigned-clocks, removing the need to set it in driver. The warning is
-thus unneeded, so we can transform it in a debug print, eventually to just
-reflect that muxclk was not set by the driver.
-
-Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Link: https://lore.kernel.org/r/20201103100554.1307190-1-codrin.ciubotariu@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/atmel/atmel-i2s.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/sound/soc/atmel/atmel-i2s.c
-+++ b/sound/soc/atmel/atmel-i2s.c
-@@ -581,8 +581,8 @@ static int atmel_i2s_sama5d2_mck_init(st
- 		err = PTR_ERR(muxclk);
- 		if (err == -EPROBE_DEFER)
- 			return -EPROBE_DEFER;
--		dev_warn(dev->dev,
--			 "failed to get the I2S clock control: %d\n", err);
-+		dev_dbg(dev->dev,
-+			"failed to get the I2S clock control: %d\n", err);
- 		return 0;
- 	}
- 
diff --git a/target/linux/at91/patches-5.10/123-regulator-mcp16502-add-linear_min_sel.patch b/target/linux/at91/patches-5.10/123-regulator-mcp16502-add-linear_min_sel.patch
deleted file mode 100644
index ce97be4b775a..000000000000
--- a/target/linux/at91/patches-5.10/123-regulator-mcp16502-add-linear_min_sel.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From f5a73f3bb600b96b6149f2115360e1d0d51fbac4 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Fri, 13 Nov 2020 17:21:07 +0200
-Subject: [PATCH 123/247] regulator: mcp16502: add linear_min_sel
-
-Selectors b/w zero and VDD_LOW_SEL are not valid. Use linear_min_sel.
-
-Fixes: 919261c03e7ca ("regulator: mcp16502: add regulator driver for MCP16502")
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605280870-32432-4-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/mcp16502.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/regulator/mcp16502.c
-+++ b/drivers/regulator/mcp16502.c
-@@ -93,6 +93,7 @@ static unsigned int mcp16502_of_map_mode
- 		.owner			= THIS_MODULE,			\
- 		.n_voltages		= MCP16502_VSEL + 1,		\
- 		.linear_ranges		= _ranges,			\
-+		.linear_min_sel		= VDD_LOW_SEL,			\
- 		.n_linear_ranges	= ARRAY_SIZE(_ranges),		\
- 		.of_match		= of_match_ptr(_name),		\
- 		.of_map_mode		= mcp16502_of_map_mode,		\
diff --git a/target/linux/at91/patches-5.10/124-regulator-mcp16502-adapt-for-get-set-on-other-regist.patch b/target/linux/at91/patches-5.10/124-regulator-mcp16502-adapt-for-get-set-on-other-regist.patch
deleted file mode 100644
index f371266c78a1..000000000000
--- a/target/linux/at91/patches-5.10/124-regulator-mcp16502-adapt-for-get-set-on-other-regist.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From 5295f4c122258a11fb6012b7e043248e681db5a2 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Fri, 13 Nov 2020 17:21:08 +0200
-Subject: [PATCH 124/247] regulator: mcp16502: adapt for get/set on other
- registers
-
-MCP16502 have multiple registers for each regulator (as described
-in enum mcp16502_reg). Adapt the code to be able to get/set all these
-registers. This is necessary for the following commits.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605280870-32432-5-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/mcp16502.c | 43 ++++++++++++++++++++++--------------
- 1 file changed, 27 insertions(+), 16 deletions(-)
-
---- a/drivers/regulator/mcp16502.c
-+++ b/drivers/regulator/mcp16502.c
-@@ -54,13 +54,9 @@
-  * This function is useful for iterating over all regulators and accessing their
-  * registers in a generic way or accessing a regulator device by its id.
-  */
--#define MCP16502_BASE(i) (((i) + 1) << 4)
-+#define MCP16502_REG_BASE(i, r) ((((i) + 1) << 4) + MCP16502_REG_##r)
- #define MCP16502_STAT_BASE(i) ((i) + 5)
- 
--#define MCP16502_OFFSET_MODE_A 0
--#define MCP16502_OFFSET_MODE_LPM 1
--#define MCP16502_OFFSET_MODE_HIB 2
--
- #define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL
- #define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE
- #define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY
-@@ -75,6 +71,23 @@
- #define MCP16502_MIN_REG 0x0
- #define MCP16502_MAX_REG 0x65
- 
-+/**
-+ * enum mcp16502_reg - MCP16502 regulators's registers
-+ * @MCP16502_REG_A: active state register
-+ * @MCP16502_REG_LPM: low power mode state register
-+ * @MCP16502_REG_HIB: hibernate state register
-+ * @MCP16502_REG_SEQ: startup sequence register
-+ * @MCP16502_REG_CFG: configuration register
-+ */
-+enum mcp16502_reg {
-+	MCP16502_REG_A,
-+	MCP16502_REG_LPM,
-+	MCP16502_REG_HIB,
-+	MCP16502_REG_HPM,
-+	MCP16502_REG_SEQ,
-+	MCP16502_REG_CFG,
-+};
-+
- static unsigned int mcp16502_of_map_mode(unsigned int mode)
- {
- 	if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE)
-@@ -144,22 +157,20 @@ static void mcp16502_gpio_set_mode(struc
- }
- 
- /*
-- * mcp16502_get_reg() - get the PMIC's configuration register for opmode
-+ * mcp16502_get_reg() - get the PMIC's state configuration register for opmode
-  *
-  * @rdev: the regulator whose register we are searching
-  * @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate
-  */
--static int mcp16502_get_reg(struct regulator_dev *rdev, int opmode)
-+static int mcp16502_get_state_reg(struct regulator_dev *rdev, int opmode)
- {
--	int reg = MCP16502_BASE(rdev_get_id(rdev));
--
- 	switch (opmode) {
- 	case MCP16502_OPMODE_ACTIVE:
--		return reg + MCP16502_OFFSET_MODE_A;
-+		return MCP16502_REG_BASE(rdev_get_id(rdev), A);
- 	case MCP16502_OPMODE_LPM:
--		return reg + MCP16502_OFFSET_MODE_LPM;
-+		return MCP16502_REG_BASE(rdev_get_id(rdev), LPM);
- 	case MCP16502_OPMODE_HIB:
--		return reg + MCP16502_OFFSET_MODE_HIB;
-+		return MCP16502_REG_BASE(rdev_get_id(rdev), HIB);
- 	default:
- 		return -EINVAL;
- 	}
-@@ -179,7 +190,7 @@ static unsigned int mcp16502_get_mode(st
- 	unsigned int val;
- 	int ret, reg;
- 
--	reg = mcp16502_get_reg(rdev, MCP16502_OPMODE_ACTIVE);
-+	reg = mcp16502_get_state_reg(rdev, MCP16502_OPMODE_ACTIVE);
- 	if (reg < 0)
- 		return reg;
- 
-@@ -210,7 +221,7 @@ static int _mcp16502_set_mode(struct reg
- 	int val;
- 	int reg;
- 
--	reg = mcp16502_get_reg(rdev, op_mode);
-+	reg = mcp16502_get_state_reg(rdev, op_mode);
- 	if (reg < 0)
- 		return reg;
- 
-@@ -269,10 +280,10 @@ static int mcp16502_suspend_get_target_r
- {
- 	switch (pm_suspend_target_state) {
- 	case PM_SUSPEND_STANDBY:
--		return mcp16502_get_reg(rdev, MCP16502_OPMODE_LPM);
-+		return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_LPM);
- 	case PM_SUSPEND_ON:
- 	case PM_SUSPEND_MEM:
--		return mcp16502_get_reg(rdev, MCP16502_OPMODE_HIB);
-+		return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_HIB);
- 	default:
- 		dev_err(&rdev->dev, "invalid suspend target: %d\n",
- 			pm_suspend_target_state);
diff --git a/target/linux/at91/patches-5.10/125-regulator-mcp16502-add-support-for-ramp-delay.patch b/target/linux/at91/patches-5.10/125-regulator-mcp16502-add-support-for-ramp-delay.patch
deleted file mode 100644
index c91dd4a18bc6..000000000000
--- a/target/linux/at91/patches-5.10/125-regulator-mcp16502-add-support-for-ramp-delay.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From 7f13433e11a3c88f1fd6417c4c5e5a6c98370b9a Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Fri, 13 Nov 2020 17:21:09 +0200
-Subject: [PATCH 125/247] regulator: mcp16502: add support for ramp delay
-
-MCP16502 have configurable ramp delay support (via DVSR bits in
-regulators' CFG register).
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605280870-32432-6-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/mcp16502.c | 89 +++++++++++++++++++++++++++++++++++-
- 1 file changed, 87 insertions(+), 2 deletions(-)
-
---- a/drivers/regulator/mcp16502.c
-+++ b/drivers/regulator/mcp16502.c
-@@ -22,8 +22,9 @@
- #define VDD_LOW_SEL 0x0D
- #define VDD_HIGH_SEL 0x3F
- 
--#define MCP16502_FLT BIT(7)
--#define MCP16502_ENS BIT(0)
-+#define MCP16502_FLT		BIT(7)
-+#define MCP16502_DVSR		GENMASK(3, 2)
-+#define MCP16502_ENS		BIT(0)
- 
- /*
-  * The PMIC has four sets of registers corresponding to four power modes:
-@@ -88,6 +89,12 @@ enum mcp16502_reg {
- 	MCP16502_REG_CFG,
- };
- 
-+/* Ramp delay (uV/us) for buck1, ldo1, ldo2. */
-+static const int mcp16502_ramp_b1l12[] = { 6250, 3125, 2083, 1563 };
-+
-+/* Ramp delay (uV/us) for buck2, buck3, buck4. */
-+static const int mcp16502_ramp_b234[] = { 3125, 1563, 1042, 781 };
-+
- static unsigned int mcp16502_of_map_mode(unsigned int mode)
- {
- 	if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE)
-@@ -271,6 +278,80 @@ static int mcp16502_get_status(struct re
- 	return REGULATOR_STATUS_UNDEFINED;
- }
- 
-+static int mcp16502_set_voltage_time_sel(struct regulator_dev *rdev,
-+					 unsigned int old_sel,
-+					 unsigned int new_sel)
-+{
-+	static const u8 us_ramp[] = { 8, 16, 24, 32 };
-+	int id = rdev_get_id(rdev);
-+	unsigned int uV_delta, val;
-+	int ret;
-+
-+	ret = regmap_read(rdev->regmap, MCP16502_REG_BASE(id, CFG), &val);
-+	if (ret)
-+		return ret;
-+
-+	val = (val & MCP16502_DVSR) >> 2;
-+	uV_delta = abs(new_sel * rdev->desc->linear_ranges->step -
-+		       old_sel * rdev->desc->linear_ranges->step);
-+	switch (id) {
-+	case BUCK1:
-+	case LDO1:
-+	case LDO2:
-+		ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val],
-+					mcp16502_ramp_b1l12[val]);
-+		break;
-+
-+	case BUCK2:
-+	case BUCK3:
-+	case BUCK4:
-+		ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val],
-+					mcp16502_ramp_b234[val]);
-+		break;
-+
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return ret;
-+}
-+
-+static int mcp16502_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-+{
-+	const int *ramp;
-+	int id = rdev_get_id(rdev);
-+	unsigned int i, size;
-+
-+	switch (id) {
-+	case BUCK1:
-+	case LDO1:
-+	case LDO2:
-+		ramp = mcp16502_ramp_b1l12;
-+		size = ARRAY_SIZE(mcp16502_ramp_b1l12);
-+		break;
-+
-+	case BUCK2:
-+	case BUCK3:
-+	case BUCK4:
-+		ramp = mcp16502_ramp_b234;
-+		size = ARRAY_SIZE(mcp16502_ramp_b234);
-+		break;
-+
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	for (i = 0; i < size; i++) {
-+		if (ramp[i] == ramp_delay)
-+			break;
-+	}
-+	if (i == size)
-+		return -EINVAL;
-+
-+	return regmap_update_bits(rdev->regmap, MCP16502_REG_BASE(id, CFG),
-+				  MCP16502_DVSR, (i << 2));
-+}
-+
- #ifdef CONFIG_SUSPEND
- /*
-  * mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC
-@@ -365,6 +446,8 @@ static const struct regulator_ops mcp165
- 	.disable			= regulator_disable_regmap,
- 	.is_enabled			= regulator_is_enabled_regmap,
- 	.get_status			= mcp16502_get_status,
-+	.set_voltage_time_sel		= mcp16502_set_voltage_time_sel,
-+	.set_ramp_delay			= mcp16502_set_ramp_delay,
- 
- 	.set_mode			= mcp16502_set_mode,
- 	.get_mode			= mcp16502_get_mode,
-@@ -389,6 +472,8 @@ static const struct regulator_ops mcp165
- 	.disable			= regulator_disable_regmap,
- 	.is_enabled			= regulator_is_enabled_regmap,
- 	.get_status			= mcp16502_get_status,
-+	.set_voltage_time_sel		= mcp16502_set_voltage_time_sel,
-+	.set_ramp_delay			= mcp16502_set_ramp_delay,
- 
- #ifdef CONFIG_SUSPEND
- 	.set_suspend_voltage		= mcp16502_set_suspend_voltage,
diff --git a/target/linux/at91/patches-5.10/126-regulator-mcp16502-remove-void-documentation-of-stru.patch b/target/linux/at91/patches-5.10/126-regulator-mcp16502-remove-void-documentation-of-stru.patch
deleted file mode 100644
index f570e2805f93..000000000000
--- a/target/linux/at91/patches-5.10/126-regulator-mcp16502-remove-void-documentation-of-stru.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 8dcbcb052f682478dcbfa7fc9abdd909e1deab87 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Fri, 13 Nov 2020 17:21:10 +0200
-Subject: [PATCH 126/247] regulator: mcp16502: remove void documentation of
- struct mcp16502
-
-struct mcp16502 has no members called rdev or rmap. Remove the
-documentation.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605280870-32432-7-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/mcp16502.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/regulator/mcp16502.c
-+++ b/drivers/regulator/mcp16502.c
-@@ -135,8 +135,6 @@ enum {
- 
- /*
-  * struct mcp16502 - PMIC representation
-- * @rdev: the regulators belonging to this chip
-- * @rmap: regmap to be used for I2C communication
-  * @lpm: LPM GPIO descriptor
-  */
- struct mcp16502 {
diff --git a/target/linux/at91/patches-5.10/127-regulator-core-validate-selector-against-linear_min_.patch b/target/linux/at91/patches-5.10/127-regulator-core-validate-selector-against-linear_min_.patch
deleted file mode 100644
index 78cfcfca3e55..000000000000
--- a/target/linux/at91/patches-5.10/127-regulator-core-validate-selector-against-linear_min_.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 3aee4f22ed0a22d3d6d22fc49812c03d876c7637 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Fri, 13 Nov 2020 17:21:05 +0200
-Subject: [PATCH 127/247] regulator: core: validate selector against
- linear_min_sel
-
-There are regulators who's min selector is not zero. Selectors loops
-(looping b/w zero and regulator::desc::n_voltages) might throw errors
-because invalid selectors are used (lower than
-regulator::desc::linear_min_sel). For this situations validate selectors
-against regulator::desc::linear_min_sel.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605280870-32432-2-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/core.c    | 9 +++++++--
- drivers/regulator/helpers.c | 3 ++-
- 2 files changed, 9 insertions(+), 3 deletions(-)
-
---- a/drivers/regulator/core.c
-+++ b/drivers/regulator/core.c
-@@ -3000,7 +3000,8 @@ static int _regulator_list_voltage(struc
- 		return rdev->desc->fixed_uV;
- 
- 	if (ops->list_voltage) {
--		if (selector >= rdev->desc->n_voltages)
-+		if (selector >= rdev->desc->n_voltages ||
-+		    selector < rdev->desc->linear_min_sel)
- 			return -EINVAL;
- 		if (lock)
- 			regulator_lock(rdev);
-@@ -3151,7 +3152,8 @@ int regulator_list_hardware_vsel(struct
- 	struct regulator_dev *rdev = regulator->rdev;
- 	const struct regulator_ops *ops = rdev->desc->ops;
- 
--	if (selector >= rdev->desc->n_voltages)
-+	if (selector >= rdev->desc->n_voltages ||
-+	    selector < rdev->desc->linear_min_sel)
- 		return -EINVAL;
- 	if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
- 		return -EOPNOTSUPP;
-@@ -4074,6 +4076,9 @@ int regulator_set_voltage_time(struct re
- 
- 	for (i = 0; i < rdev->desc->n_voltages; i++) {
- 		/* We only look for exact voltage matches here */
-+		if (i < rdev->desc->linear_min_sel)
-+			continue;
-+
- 		voltage = regulator_list_voltage(regulator, i);
- 		if (voltage < 0)
- 			return -EINVAL;
---- a/drivers/regulator/helpers.c
-+++ b/drivers/regulator/helpers.c
-@@ -647,7 +647,8 @@ int regulator_list_voltage_table(struct
- 		return -EINVAL;
- 	}
- 
--	if (selector >= rdev->desc->n_voltages)
-+	if (selector >= rdev->desc->n_voltages ||
-+	    selector < rdev->desc->linear_min_sel)
- 		return -EINVAL;
- 
- 	return rdev->desc->volt_table[selector];
diff --git a/target/linux/at91/patches-5.10/128-regulator-core-do-not-continue-if-selector-match.patch b/target/linux/at91/patches-5.10/128-regulator-core-do-not-continue-if-selector-match.patch
deleted file mode 100644
index 9c9930298032..000000000000
--- a/target/linux/at91/patches-5.10/128-regulator-core-do-not-continue-if-selector-match.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 42b56e8bd343f34d5f2a601d8a8a05d8c861c08c Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Fri, 13 Nov 2020 19:56:04 +0200
-Subject: [PATCH 128/247] regulator: core: do not continue if selector match
-
-Do not continue if selector has already been located.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1605290164-11556-1-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/core.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/regulator/core.c
-+++ b/drivers/regulator/core.c
-@@ -4079,6 +4079,9 @@ int regulator_set_voltage_time(struct re
- 		if (i < rdev->desc->linear_min_sel)
- 			continue;
- 
-+		if (old_sel >= 0 && new_sel >= 0)
-+			break;
-+
- 		voltage = regulator_list_voltage(regulator, i);
- 		if (voltage < 0)
- 			return -EINVAL;
diff --git a/target/linux/at91/patches-5.10/129-regulator-core-return-zero-for-selectors-lower-than-.patch b/target/linux/at91/patches-5.10/129-regulator-core-return-zero-for-selectors-lower-than-.patch
deleted file mode 100644
index 5c6267c03304..000000000000
--- a/target/linux/at91/patches-5.10/129-regulator-core-return-zero-for-selectors-lower-than-.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 0e933ffc049a0e181b5a6c3af1933976d6959ba9 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 25 Nov 2020 19:25:47 +0200
-Subject: [PATCH 129/247] regulator: core: return zero for selectors lower than
- linear_min_sel
-
-Selectors lower than linear_min_sel should not be considered invalid.
-Thus return zero in case _regulator_list_voltage(),
-regulator_list_hardware_vsel() or regulator_list_voltage_table()
-receives such selectors as argument.
-
-Fixes: bdcd1177578c ("regulator: core: validate selector against linear_min_sel")
-Reported-by: Jon Hunter <jonathanh@nvidia.com>
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1606325147-606-1-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/core.c    | 10 ++++++----
- drivers/regulator/helpers.c |  5 +++--
- 2 files changed, 9 insertions(+), 6 deletions(-)
-
---- a/drivers/regulator/core.c
-+++ b/drivers/regulator/core.c
-@@ -3000,9 +3000,10 @@ static int _regulator_list_voltage(struc
- 		return rdev->desc->fixed_uV;
- 
- 	if (ops->list_voltage) {
--		if (selector >= rdev->desc->n_voltages ||
--		    selector < rdev->desc->linear_min_sel)
-+		if (selector >= rdev->desc->n_voltages)
- 			return -EINVAL;
-+		if (selector < rdev->desc->linear_min_sel)
-+			return 0;
- 		if (lock)
- 			regulator_lock(rdev);
- 		ret = ops->list_voltage(rdev, selector);
-@@ -3152,9 +3153,10 @@ int regulator_list_hardware_vsel(struct
- 	struct regulator_dev *rdev = regulator->rdev;
- 	const struct regulator_ops *ops = rdev->desc->ops;
- 
--	if (selector >= rdev->desc->n_voltages ||
--	    selector < rdev->desc->linear_min_sel)
-+	if (selector >= rdev->desc->n_voltages)
- 		return -EINVAL;
-+	if (selector < rdev->desc->linear_min_sel)
-+		return 0;
- 	if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
- 		return -EOPNOTSUPP;
- 
---- a/drivers/regulator/helpers.c
-+++ b/drivers/regulator/helpers.c
-@@ -647,9 +647,10 @@ int regulator_list_voltage_table(struct
- 		return -EINVAL;
- 	}
- 
--	if (selector >= rdev->desc->n_voltages ||
--	    selector < rdev->desc->linear_min_sel)
-+	if (selector >= rdev->desc->n_voltages)
- 		return -EINVAL;
-+	if (selector < rdev->desc->linear_min_sel)
-+		return 0;
- 
- 	return rdev->desc->volt_table[selector];
- }
diff --git a/target/linux/at91/patches-5.10/130-regulator-mcp16502-lpm-pin-can-be-optional-on-some-p.patch b/target/linux/at91/patches-5.10/130-regulator-mcp16502-lpm-pin-can-be-optional-on-some-p.patch
deleted file mode 100644
index 12679a20bda4..000000000000
--- a/target/linux/at91/patches-5.10/130-regulator-mcp16502-lpm-pin-can-be-optional-on-some-p.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 763fe72f607d4e929d2c710c88e5c6978dd6ad97 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 7 Jan 2021 16:15:26 +0200
-Subject: [PATCH 130/247] regulator: mcp16502: lpm pin can be optional on some
- platforms
-
-On some platform (e.g. SAMA7G5) LPM pin should be optional as it can
-be controlled explicitly (via shutdown controller registers) in the
-platform specific power saving code to decrease the power consumption
-while suspended as this SoC pin may be connected to other devices that
-could take power saving actions based on its value.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/1610028927-9842-3-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/mcp16502.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/regulator/mcp16502.c
-+++ b/drivers/regulator/mcp16502.c
-@@ -550,7 +550,7 @@ static int mcp16502_probe(struct i2c_cli
- 	config.regmap = rmap;
- 	config.driver_data = mcp;
- 
--	mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW);
-+	mcp->lpm = devm_gpiod_get_optional(dev, "lpm", GPIOD_OUT_LOW);
- 	if (IS_ERR(mcp->lpm)) {
- 		dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm));
- 		return PTR_ERR(mcp->lpm);
diff --git a/target/linux/at91/patches-5.10/131-pinctrl-at91-pio4-add-support-for-fewer-lines-on-las.patch b/target/linux/at91/patches-5.10/131-pinctrl-at91-pio4-add-support-for-fewer-lines-on-las.patch
deleted file mode 100644
index 78db5a0d3217..000000000000
--- a/target/linux/at91/patches-5.10/131-pinctrl-at91-pio4-add-support-for-fewer-lines-on-las.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 7cb1dad7a7dfe4cfe55ebe86930dd6aef0de66b4 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Fri, 13 Nov 2020 15:24:29 +0200
-Subject: [PATCH 131/247] pinctrl: at91-pio4: add support for fewer lines on
- last PIO bank
-
-Some products, like sama7g5, do not have a full last bank of PIO lines.
-In this case for example, sama7g5 only has 8 lines for the PE bank.
-PA0-31, PB0-31, PC0-31, PD0-31, PE0-7, in total 136 lines.
-To cope with this situation, added a data attribute that is product dependent,
-to specify the number of lines of the last bank.
-In case this number is different from the macro ATMEL_PIO_NPINS_PER_BANK,
-adjust the total number of lines accordingly.
-This will avoid advertising 160 lines instead of the actual 136, as this
-product supports, and to avoid reading/writing to invalid register addresses.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
-Link: https://lore.kernel.org/r/20201113132429.420940-1-eugen.hristev@microchip.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-at91-pio4.c | 18 ++++++++++++++++--
- 1 file changed, 16 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-at91-pio4.c
-+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
-@@ -71,8 +71,15 @@
- /* Custom pinconf parameters */
- #define ATMEL_PIN_CONFIG_DRIVE_STRENGTH	(PIN_CONFIG_END + 1)
- 
-+/**
-+ * struct atmel_pioctrl_data - Atmel PIO controller (pinmux + gpio) data struct
-+ * @nbanks: number of PIO banks
-+ * @last_bank_count: number of lines in the last bank (can be less than
-+ *	the rest of the banks).
-+ */
- struct atmel_pioctrl_data {
- 	unsigned nbanks;
-+	unsigned last_bank_count;
- };
- 
- struct atmel_group {
-@@ -980,11 +987,13 @@ static const struct dev_pm_ops atmel_pct
-  * We can have up to 16 banks.
-  */
- static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = {
--	.nbanks		= 4,
-+	.nbanks			= 4,
-+	.last_bank_count	= ATMEL_PIO_NPINS_PER_BANK,
- };
- 
- static const struct atmel_pioctrl_data microchip_sama7g5_pioctrl_data = {
--	.nbanks		= 5,
-+	.nbanks			= 5,
-+	.last_bank_count	= 8, /* sama7g5 has only PE0 to PE7 */
- };
- 
- static const struct of_device_id atmel_pctrl_of_match[] = {
-@@ -1025,6 +1034,11 @@ static int atmel_pinctrl_probe(struct pl
- 	atmel_pioctrl_data = match->data;
- 	atmel_pioctrl->nbanks = atmel_pioctrl_data->nbanks;
- 	atmel_pioctrl->npins = atmel_pioctrl->nbanks * ATMEL_PIO_NPINS_PER_BANK;
-+	/* if last bank has limited number of pins, adjust accordingly */
-+	if (atmel_pioctrl_data->last_bank_count != ATMEL_PIO_NPINS_PER_BANK) {
-+		atmel_pioctrl->npins -= ATMEL_PIO_NPINS_PER_BANK;
-+		atmel_pioctrl->npins += atmel_pioctrl_data->last_bank_count;
-+	}
- 
- 	atmel_pioctrl->reg_base = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(atmel_pioctrl->reg_base))
diff --git a/target/linux/at91/patches-5.10/132-dmaengine-at_xdmac-adapt-perid-for-mem2mem-operation.patch b/target/linux/at91/patches-5.10/132-dmaengine-at_xdmac-adapt-perid-for-mem2mem-operation.patch
deleted file mode 100644
index ca1fa8cee50f..000000000000
--- a/target/linux/at91/patches-5.10/132-dmaengine-at_xdmac-adapt-perid-for-mem2mem-operation.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 1dccaa4c1e99cd8bd27684a2c87ec806d426c088 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Fri, 16 Oct 2020 12:37:25 +0300
-Subject: [PATCH 132/247] dmaengine: at_xdmac: adapt perid for mem2mem
- operations
-
-The PERID in the CC register for mem2mem operations must match an unused
-PERID.
-The PERID field is 7 bits, but the selected value is 0x3f.
-On later products we can have more reserved PERIDs for actual peripherals,
-thus this needs to be increased to maximum size.
-Changing the value to 0x7f, which is the maximum for 7 bits field.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
-Link: https://lore.kernel.org/r/20201016093725.289880-1-eugen.hristev@microchip.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/dma/at_xdmac.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/dma/at_xdmac.c
-+++ b/drivers/dma/at_xdmac.c
-@@ -865,7 +865,7 @@ at_xdmac_interleaved_queue_desc(struct d
- 	 * match the one of another channel. If not, it could lead to spurious
- 	 * flag status.
- 	 */
--	u32			chan_cc = AT_XDMAC_CC_PERID(0x3f)
-+	u32			chan_cc = AT_XDMAC_CC_PERID(0x7f)
- 					| AT_XDMAC_CC_DIF(0)
- 					| AT_XDMAC_CC_SIF(0)
- 					| AT_XDMAC_CC_MBSIZE_SIXTEEN
-@@ -1047,7 +1047,7 @@ at_xdmac_prep_dma_memcpy(struct dma_chan
- 	 * match the one of another channel. If not, it could lead to spurious
- 	 * flag status.
- 	 */
--	u32			chan_cc = AT_XDMAC_CC_PERID(0x3f)
-+	u32			chan_cc = AT_XDMAC_CC_PERID(0x7f)
- 					| AT_XDMAC_CC_DAM_INCREMENTED_AM
- 					| AT_XDMAC_CC_SAM_INCREMENTED_AM
- 					| AT_XDMAC_CC_DIF(0)
-@@ -1153,7 +1153,7 @@ static struct at_xdmac_desc *at_xdmac_me
- 	 * match the one of another channel. If not, it could lead to spurious
- 	 * flag status.
- 	 */
--	u32			chan_cc = AT_XDMAC_CC_PERID(0x3f)
-+	u32			chan_cc = AT_XDMAC_CC_PERID(0x7f)
- 					| AT_XDMAC_CC_DAM_UBS_AM
- 					| AT_XDMAC_CC_SAM_INCREMENTED_AM
- 					| AT_XDMAC_CC_DIF(0)
diff --git a/target/linux/at91/patches-5.10/133-dmaengine-at_xdmac-add-support-for-sama7g5-based-at_.patch b/target/linux/at91/patches-5.10/133-dmaengine-at_xdmac-add-support-for-sama7g5-based-at_.patch
deleted file mode 100644
index 6d338490fbae..000000000000
--- a/target/linux/at91/patches-5.10/133-dmaengine-at_xdmac-add-support-for-sama7g5-based-at_.patch
+++ /dev/null
@@ -1,280 +0,0 @@
-From 613af756b93fe005d9db11ea26fd0318f239d5a2 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Fri, 16 Oct 2020 12:38:50 +0300
-Subject: [PATCH 133/247] dmaengine: at_xdmac: add support for sama7g5 based
- at_xdmac
-
-SAMA7G5 SoC uses a slightly different variant of the AT_XDMAC.
-Added support by a new compatible and a layout struct that copes
-to the specific version considering the compatible string.
-Only the differences in register map are present in the layout struct.
-I reworked the register access for this part that has the differences.
-Also the Source/Destination Interface bits are no longer valid for this
-variant of the XDMAC. Thus, the layout also has a bool for specifying
-whether these bits are required or not.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Link: https://lore.kernel.org/r/20201016093850.290053-1-eugen.hristev@microchip.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/dma/at_xdmac.c | 110 +++++++++++++++++++++++++++++++----------
- 1 file changed, 84 insertions(+), 26 deletions(-)
-
---- a/drivers/dma/at_xdmac.c
-+++ b/drivers/dma/at_xdmac.c
-@@ -38,13 +38,6 @@
- #define AT_XDMAC_GE		0x1C	/* Global Channel Enable Register */
- #define AT_XDMAC_GD		0x20	/* Global Channel Disable Register */
- #define AT_XDMAC_GS		0x24	/* Global Channel Status Register */
--#define AT_XDMAC_GRS		0x28	/* Global Channel Read Suspend Register */
--#define AT_XDMAC_GWS		0x2C	/* Global Write Suspend Register */
--#define AT_XDMAC_GRWS		0x30	/* Global Channel Read Write Suspend Register */
--#define AT_XDMAC_GRWR		0x34	/* Global Channel Read Write Resume Register */
--#define AT_XDMAC_GSWR		0x38	/* Global Channel Software Request Register */
--#define AT_XDMAC_GSWS		0x3C	/* Global channel Software Request Status Register */
--#define AT_XDMAC_GSWF		0x40	/* Global Channel Software Flush Request Register */
- #define AT_XDMAC_VERSION	0xFFC	/* XDMAC Version Register */
- 
- /* Channel relative registers offsets */
-@@ -151,8 +144,6 @@
- #define AT_XDMAC_CSUS		0x30	/* Channel Source Microblock Stride */
- #define AT_XDMAC_CDUS		0x34	/* Channel Destination Microblock Stride */
- 
--#define AT_XDMAC_CHAN_REG_BASE	0x50	/* Channel registers base address */
--
- /* Microblock control members */
- #define AT_XDMAC_MBR_UBC_UBLEN_MAX	0xFFFFFFUL	/* Maximum Microblock Length */
- #define AT_XDMAC_MBR_UBC_NDE		(0x1 << 24)	/* Next Descriptor Enable */
-@@ -180,6 +171,27 @@ enum atc_status {
- 	AT_XDMAC_CHAN_IS_PAUSED,
- };
- 
-+struct at_xdmac_layout {
-+	/* Global Channel Read Suspend Register */
-+	u8				grs;
-+	/* Global Write Suspend Register */
-+	u8				gws;
-+	/* Global Channel Read Write Suspend Register */
-+	u8				grws;
-+	/* Global Channel Read Write Resume Register */
-+	u8				grwr;
-+	/* Global Channel Software Request Register */
-+	u8				gswr;
-+	/* Global channel Software Request Status Register */
-+	u8				gsws;
-+	/* Global Channel Software Flush Request Register */
-+	u8				gswf;
-+	/* Channel reg base */
-+	u8				chan_cc_reg_base;
-+	/* Source/Destination Interface must be specified or not */
-+	bool				sdif;
-+};
-+
- /* ----- Channels ----- */
- struct at_xdmac_chan {
- 	struct dma_chan			chan;
-@@ -213,6 +225,7 @@ struct at_xdmac {
- 	struct clk		*clk;
- 	u32			save_gim;
- 	struct dma_pool		*at_xdmac_desc_pool;
-+	const struct at_xdmac_layout	*layout;
- 	struct at_xdmac_chan	chan[];
- };
- 
-@@ -245,9 +258,33 @@ struct at_xdmac_desc {
- 	struct list_head		xfer_node;
- } __aligned(sizeof(u64));
- 
-+static const struct at_xdmac_layout at_xdmac_sama5d4_layout = {
-+	.grs = 0x28,
-+	.gws = 0x2C,
-+	.grws = 0x30,
-+	.grwr = 0x34,
-+	.gswr = 0x38,
-+	.gsws = 0x3C,
-+	.gswf = 0x40,
-+	.chan_cc_reg_base = 0x50,
-+	.sdif = true,
-+};
-+
-+static const struct at_xdmac_layout at_xdmac_sama7g5_layout = {
-+	.grs = 0x30,
-+	.gws = 0x38,
-+	.grws = 0x40,
-+	.grwr = 0x44,
-+	.gswr = 0x48,
-+	.gsws = 0x4C,
-+	.gswf = 0x50,
-+	.chan_cc_reg_base = 0x60,
-+	.sdif = false,
-+};
-+
- static inline void __iomem *at_xdmac_chan_reg_base(struct at_xdmac *atxdmac, unsigned int chan_nb)
- {
--	return atxdmac->regs + (AT_XDMAC_CHAN_REG_BASE + chan_nb * 0x40);
-+	return atxdmac->regs + (atxdmac->layout->chan_cc_reg_base + chan_nb * 0x40);
- }
- 
- #define at_xdmac_read(atxdmac, reg) readl_relaxed((atxdmac)->regs + (reg))
-@@ -343,8 +380,10 @@ static void at_xdmac_start_xfer(struct a
- 	first->active_xfer = true;
- 
- 	/* Tell xdmac where to get the first descriptor. */
--	reg = AT_XDMAC_CNDA_NDA(first->tx_dma_desc.phys)
--	      | AT_XDMAC_CNDA_NDAIF(atchan->memif);
-+	reg = AT_XDMAC_CNDA_NDA(first->tx_dma_desc.phys);
-+	if (atxdmac->layout->sdif)
-+		reg |= AT_XDMAC_CNDA_NDAIF(atchan->memif);
-+
- 	at_xdmac_chan_write(atchan, AT_XDMAC_CNDA, reg);
- 
- 	/*
-@@ -539,6 +578,7 @@ static int at_xdmac_compute_chan_conf(st
- 				      enum dma_transfer_direction direction)
- {
- 	struct at_xdmac_chan	*atchan = to_at_xdmac_chan(chan);
-+	struct at_xdmac		*atxdmac = to_at_xdmac(atchan->chan.device);
- 	int			csize, dwidth;
- 
- 	if (direction == DMA_DEV_TO_MEM) {
-@@ -546,12 +586,14 @@ static int at_xdmac_compute_chan_conf(st
- 			AT91_XDMAC_DT_PERID(atchan->perid)
- 			| AT_XDMAC_CC_DAM_INCREMENTED_AM
- 			| AT_XDMAC_CC_SAM_FIXED_AM
--			| AT_XDMAC_CC_DIF(atchan->memif)
--			| AT_XDMAC_CC_SIF(atchan->perif)
- 			| AT_XDMAC_CC_SWREQ_HWR_CONNECTED
- 			| AT_XDMAC_CC_DSYNC_PER2MEM
- 			| AT_XDMAC_CC_MBSIZE_SIXTEEN
- 			| AT_XDMAC_CC_TYPE_PER_TRAN;
-+		if (atxdmac->layout->sdif)
-+			atchan->cfg |= AT_XDMAC_CC_DIF(atchan->memif) |
-+				       AT_XDMAC_CC_SIF(atchan->perif);
-+
- 		csize = ffs(atchan->sconfig.src_maxburst) - 1;
- 		if (csize < 0) {
- 			dev_err(chan2dev(chan), "invalid src maxburst value\n");
-@@ -569,12 +611,14 @@ static int at_xdmac_compute_chan_conf(st
- 			AT91_XDMAC_DT_PERID(atchan->perid)
- 			| AT_XDMAC_CC_DAM_FIXED_AM
- 			| AT_XDMAC_CC_SAM_INCREMENTED_AM
--			| AT_XDMAC_CC_DIF(atchan->perif)
--			| AT_XDMAC_CC_SIF(atchan->memif)
- 			| AT_XDMAC_CC_SWREQ_HWR_CONNECTED
- 			| AT_XDMAC_CC_DSYNC_MEM2PER
- 			| AT_XDMAC_CC_MBSIZE_SIXTEEN
- 			| AT_XDMAC_CC_TYPE_PER_TRAN;
-+		if (atxdmac->layout->sdif)
-+			atchan->cfg |= AT_XDMAC_CC_DIF(atchan->perif) |
-+				       AT_XDMAC_CC_SIF(atchan->memif);
-+
- 		csize = ffs(atchan->sconfig.dst_maxburst) - 1;
- 		if (csize < 0) {
- 			dev_err(chan2dev(chan), "invalid src maxburst value\n");
-@@ -864,10 +908,12 @@ at_xdmac_interleaved_queue_desc(struct d
- 	 * ERRATA: Even if useless for memory transfers, the PERID has to not
- 	 * match the one of another channel. If not, it could lead to spurious
- 	 * flag status.
-+	 * For SAMA7G5x case, the SIF and DIF fields are no longer used.
-+	 * Thus, no need to have the SIF/DIF interfaces here.
-+	 * For SAMA5D4x and SAMA5D2x the SIF and DIF are already configured as
-+	 * zero.
- 	 */
- 	u32			chan_cc = AT_XDMAC_CC_PERID(0x7f)
--					| AT_XDMAC_CC_DIF(0)
--					| AT_XDMAC_CC_SIF(0)
- 					| AT_XDMAC_CC_MBSIZE_SIXTEEN
- 					| AT_XDMAC_CC_TYPE_MEM_TRAN;
- 
-@@ -1046,12 +1092,14 @@ at_xdmac_prep_dma_memcpy(struct dma_chan
- 	 * ERRATA: Even if useless for memory transfers, the PERID has to not
- 	 * match the one of another channel. If not, it could lead to spurious
- 	 * flag status.
-+	 * For SAMA7G5x case, the SIF and DIF fields are no longer used.
-+	 * Thus, no need to have the SIF/DIF interfaces here.
-+	 * For SAMA5D4x and SAMA5D2x the SIF and DIF are already configured as
-+	 * zero.
- 	 */
- 	u32			chan_cc = AT_XDMAC_CC_PERID(0x7f)
- 					| AT_XDMAC_CC_DAM_INCREMENTED_AM
- 					| AT_XDMAC_CC_SAM_INCREMENTED_AM
--					| AT_XDMAC_CC_DIF(0)
--					| AT_XDMAC_CC_SIF(0)
- 					| AT_XDMAC_CC_MBSIZE_SIXTEEN
- 					| AT_XDMAC_CC_TYPE_MEM_TRAN;
- 	unsigned long		irqflags;
-@@ -1152,12 +1200,14 @@ static struct at_xdmac_desc *at_xdmac_me
- 	 * ERRATA: Even if useless for memory transfers, the PERID has to not
- 	 * match the one of another channel. If not, it could lead to spurious
- 	 * flag status.
-+	 * For SAMA7G5x case, the SIF and DIF fields are no longer used.
-+	 * Thus, no need to have the SIF/DIF interfaces here.
-+	 * For SAMA5D4x and SAMA5D2x the SIF and DIF are already configured as
-+	 * zero.
- 	 */
- 	u32			chan_cc = AT_XDMAC_CC_PERID(0x7f)
- 					| AT_XDMAC_CC_DAM_UBS_AM
- 					| AT_XDMAC_CC_SAM_INCREMENTED_AM
--					| AT_XDMAC_CC_DIF(0)
--					| AT_XDMAC_CC_SIF(0)
- 					| AT_XDMAC_CC_MBSIZE_SIXTEEN
- 					| AT_XDMAC_CC_MEMSET_HW_MODE
- 					| AT_XDMAC_CC_TYPE_MEM_TRAN;
-@@ -1436,7 +1486,7 @@ at_xdmac_tx_status(struct dma_chan *chan
- 	mask = AT_XDMAC_CC_TYPE | AT_XDMAC_CC_DSYNC;
- 	value = AT_XDMAC_CC_TYPE_PER_TRAN | AT_XDMAC_CC_DSYNC_PER2MEM;
- 	if ((desc->lld.mbr_cfg & mask) == value) {
--		at_xdmac_write(atxdmac, AT_XDMAC_GSWF, atchan->mask);
-+		at_xdmac_write(atxdmac, atxdmac->layout->gswf, atchan->mask);
- 		while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS))
- 			cpu_relax();
- 	}
-@@ -1494,7 +1544,7 @@ at_xdmac_tx_status(struct dma_chan *chan
- 	 * FIFO flush ensures that data are really written.
- 	 */
- 	if ((desc->lld.mbr_cfg & mask) == value) {
--		at_xdmac_write(atxdmac, AT_XDMAC_GSWF, atchan->mask);
-+		at_xdmac_write(atxdmac, atxdmac->layout->gswf, atchan->mask);
- 		while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS))
- 			cpu_relax();
- 	}
-@@ -1762,7 +1812,7 @@ static int at_xdmac_device_pause(struct
- 		return 0;
- 
- 	spin_lock_irqsave(&atchan->lock, flags);
--	at_xdmac_write(atxdmac, AT_XDMAC_GRWS, atchan->mask);
-+	at_xdmac_write(atxdmac, atxdmac->layout->grws, atchan->mask);
- 	while (at_xdmac_chan_read(atchan, AT_XDMAC_CC)
- 	       & (AT_XDMAC_CC_WRIP | AT_XDMAC_CC_RDIP))
- 		cpu_relax();
-@@ -1785,7 +1835,7 @@ static int at_xdmac_device_resume(struct
- 		return 0;
- 	}
- 
--	at_xdmac_write(atxdmac, AT_XDMAC_GRWR, atchan->mask);
-+	at_xdmac_write(atxdmac, atxdmac->layout->grwr, atchan->mask);
- 	clear_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status);
- 	spin_unlock_irqrestore(&atchan->lock, flags);
- 
-@@ -1992,6 +2042,10 @@ static int at_xdmac_probe(struct platfor
- 	atxdmac->regs = base;
- 	atxdmac->irq = irq;
- 
-+	atxdmac->layout = of_device_get_match_data(&pdev->dev);
-+	if (!atxdmac->layout)
-+		return -ENODEV;
-+
- 	atxdmac->clk = devm_clk_get(&pdev->dev, "dma_clk");
- 	if (IS_ERR(atxdmac->clk)) {
- 		dev_err(&pdev->dev, "can't get dma_clk\n");
-@@ -2134,6 +2188,10 @@ static const struct dev_pm_ops atmel_xdm
- static const struct of_device_id atmel_xdmac_dt_ids[] = {
- 	{
- 		.compatible = "atmel,sama5d4-dma",
-+		.data = &at_xdmac_sama5d4_layout,
-+	}, {
-+		.compatible = "microchip,sama7g5-dma",
-+		.data = &at_xdmac_sama7g5_layout,
- 	}, {
- 		/* sentinel */
- 	}
diff --git a/target/linux/at91/patches-5.10/134-dmaengine-at_xdmac-add-AXI-priority-support-and-reco.patch b/target/linux/at91/patches-5.10/134-dmaengine-at_xdmac-add-AXI-priority-support-and-reco.patch
deleted file mode 100644
index 463d03a35ebd..000000000000
--- a/target/linux/at91/patches-5.10/134-dmaengine-at_xdmac-add-AXI-priority-support-and-reco.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From 4833d6ea13a6d2c44a91247991a82c3eb6c1613e Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Fri, 16 Oct 2020 12:39:18 +0300
-Subject: [PATCH 134/247] dmaengine: at_xdmac: add AXI priority support and
- recommended settings
-
-The sama7g5 version of the XDMAC supports priority configuration and
-outstanding capabilities.
-Add defines for the specific registers for this configuration, together
-with recommended settings.
-However the settings are very different if the XDMAC is a mem2mem or a
-per2mem controller.
-Thus, we need to differentiate according to device tree property.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Link: https://lore.kernel.org/r/20201016093918.290137-1-eugen.hristev@microchip.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/dma/at_xdmac.c | 47 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 47 insertions(+)
-
---- a/drivers/dma/at_xdmac.c
-+++ b/drivers/dma/at_xdmac.c
-@@ -30,7 +30,24 @@
- #define		AT_XDMAC_FIFO_SZ(i)	(((i) >> 5) & 0x7FF)		/* Number of Bytes */
- #define		AT_XDMAC_NB_REQ(i)	((((i) >> 16) & 0x3F) + 1)	/* Number of Peripheral Requests Minus One */
- #define AT_XDMAC_GCFG		0x04	/* Global Configuration Register */
-+#define		AT_XDMAC_WRHP(i)		(((i) & 0xF) << 4)
-+#define		AT_XDMAC_WRMP(i)		(((i) & 0xF) << 8)
-+#define		AT_XDMAC_WRLP(i)		(((i) & 0xF) << 12)
-+#define		AT_XDMAC_RDHP(i)		(((i) & 0xF) << 16)
-+#define		AT_XDMAC_RDMP(i)		(((i) & 0xF) << 20)
-+#define		AT_XDMAC_RDLP(i)		(((i) & 0xF) << 24)
-+#define		AT_XDMAC_RDSG(i)		(((i) & 0xF) << 28)
-+#define AT_XDMAC_GCFG_M2M	(AT_XDMAC_RDLP(0xF) | AT_XDMAC_WRLP(0xF))
-+#define AT_XDMAC_GCFG_P2M	(AT_XDMAC_RDSG(0x1) | AT_XDMAC_RDHP(0x3) | \
-+				AT_XDMAC_WRHP(0x5))
- #define AT_XDMAC_GWAC		0x08	/* Global Weighted Arbiter Configuration Register */
-+#define		AT_XDMAC_PW0(i)		(((i) & 0xF) << 0)
-+#define		AT_XDMAC_PW1(i)		(((i) & 0xF) << 4)
-+#define		AT_XDMAC_PW2(i)		(((i) & 0xF) << 8)
-+#define		AT_XDMAC_PW3(i)		(((i) & 0xF) << 12)
-+#define AT_XDMAC_GWAC_M2M	0
-+#define AT_XDMAC_GWAC_P2M	(AT_XDMAC_PW0(0xF) | AT_XDMAC_PW2(0xF))
-+
- #define AT_XDMAC_GIE		0x0C	/* Global Interrupt Enable Register */
- #define AT_XDMAC_GID		0x10	/* Global Interrupt Disable Register */
- #define AT_XDMAC_GIM		0x14	/* Global Interrupt Mask Register */
-@@ -190,6 +207,8 @@ struct at_xdmac_layout {
- 	u8				chan_cc_reg_base;
- 	/* Source/Destination Interface must be specified or not */
- 	bool				sdif;
-+	/* AXI queue priority configuration supported */
-+	bool				axi_config;
- };
- 
- /* ----- Channels ----- */
-@@ -268,6 +287,7 @@ static const struct at_xdmac_layout at_x
- 	.gswf = 0x40,
- 	.chan_cc_reg_base = 0x50,
- 	.sdif = true,
-+	.axi_config = false,
- };
- 
- static const struct at_xdmac_layout at_xdmac_sama7g5_layout = {
-@@ -280,6 +300,7 @@ static const struct at_xdmac_layout at_x
- 	.gswf = 0x50,
- 	.chan_cc_reg_base = 0x60,
- 	.sdif = false,
-+	.axi_config = true,
- };
- 
- static inline void __iomem *at_xdmac_chan_reg_base(struct at_xdmac *atxdmac, unsigned int chan_nb)
-@@ -2003,6 +2024,30 @@ static int atmel_xdmac_resume(struct dev
- }
- #endif /* CONFIG_PM_SLEEP */
- 
-+static void at_xdmac_axi_config(struct platform_device *pdev)
-+{
-+	struct at_xdmac	*atxdmac = (struct at_xdmac *)platform_get_drvdata(pdev);
-+	bool dev_m2m = false;
-+	u32 dma_requests;
-+
-+	if (!atxdmac->layout->axi_config)
-+		return; /* Not supported */
-+
-+	if (!of_property_read_u32(pdev->dev.of_node, "dma-requests",
-+				  &dma_requests)) {
-+		dev_info(&pdev->dev, "controller in mem2mem mode.\n");
-+		dev_m2m = true;
-+	}
-+
-+	if (dev_m2m) {
-+		at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_M2M);
-+		at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_M2M);
-+	} else {
-+		at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_P2M);
-+		at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_P2M);
-+	}
-+}
-+
- static int at_xdmac_probe(struct platform_device *pdev)
- {
- 	struct at_xdmac	*atxdmac;
-@@ -2147,6 +2192,8 @@ static int at_xdmac_probe(struct platfor
- 	dev_info(&pdev->dev, "%d channels, mapped at 0x%p\n",
- 		 nr_channels, atxdmac->regs);
- 
-+	at_xdmac_axi_config(pdev);
-+
- 	return 0;
- 
- err_dma_unregister:
diff --git a/target/linux/at91/patches-5.10/135-net-macb-Correct-usage-of-MACB_CAPS_CLK_HW_CHG-flag.patch b/target/linux/at91/patches-5.10/135-net-macb-Correct-usage-of-MACB_CAPS_CLK_HW_CHG-flag.patch
deleted file mode 100644
index 210d1bd2de7b..000000000000
--- a/target/linux/at91/patches-5.10/135-net-macb-Correct-usage-of-MACB_CAPS_CLK_HW_CHG-flag.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 982347f757b85ef526afaf243867ddd515475e1b Mon Sep 17 00:00:00 2001
-From: Charles Keepax <ckeepax@opensource.cirrus.com>
-Date: Mon, 4 Jan 2021 10:38:02 +0000
-Subject: [PATCH 135/247] net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
-
-A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of
-macb_set_tx_clk were gated on the presence of this flag.
-
--   if (!clk)
-+ if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
-
-However the flag was not added to anything other than the new
-sama7g5_gem, turning that function call into a no op for all other
-systems. This breaks the networking on Zynq.
-
-The commit message adding this states: a new capability so that
-macb_set_tx_clock() to not be called for IPs having this
-capability
-
-This strongly implies that present of the flag was intended to skip
-the function not absence of the flag. Update the if statement to
-this effect, which repairs the existing users.
-
-Fixes: daafa1d33cc9 ("net: macb: add capability to not set the clock rate")
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
-Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20210104103802.13091-1-ckeepax@opensource.cirrus.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/cadence/macb_main.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/cadence/macb_main.c
-+++ b/drivers/net/ethernet/cadence/macb_main.c
-@@ -464,7 +464,7 @@ static void macb_set_tx_clk(struct macb
- {
- 	long ferr, rate, rate_rounded;
- 
--	if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
-+	if (!bp->tx_clk || (bp->caps & MACB_CAPS_CLK_HW_CHG))
- 		return;
- 
- 	switch (speed) {
diff --git a/target/linux/at91/patches-5.10/136-ARM-at91-sam9x60-SiP-types-added-to-soc-description.patch b/target/linux/at91/patches-5.10/136-ARM-at91-sam9x60-SiP-types-added-to-soc-description.patch
deleted file mode 100644
index 7c36d0f93a10..000000000000
--- a/target/linux/at91/patches-5.10/136-ARM-at91-sam9x60-SiP-types-added-to-soc-description.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From a2eda4ef1e3d617cdd669e256e45e969fab62398 Mon Sep 17 00:00:00 2001
-From: Kai Stuhlemmer <kai.stuhlemmer@ebee.de>
-Date: Thu, 8 Oct 2020 14:50:28 +0200
-Subject: [PATCH 136/247] ARM: at91: sam9x60 SiP types added to soc description
-
-Adding SAM9X60 SIP variants to the soc description list.
-
-Signed-off-by: Kai Stuhlemmer <kai.stuhlemmer@ebee.de>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-Link: https://lore.kernel.org/r/20201008125028.21071-1-nicolas.ferre@microchip.com
----
- drivers/soc/atmel/soc.c | 6 ++++++
- drivers/soc/atmel/soc.h | 3 +++
- 2 files changed, 9 insertions(+)
-
---- a/drivers/soc/atmel/soc.c
-+++ b/drivers/soc/atmel/soc.c
-@@ -69,6 +69,12 @@ static const struct at91_soc __initconst
- #endif
- #ifdef CONFIG_SOC_SAM9X60
- 	AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_EXID_MATCH, "sam9x60", "sam9x60"),
-+	AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D5M_EXID_MATCH,
-+		 "sam9x60 64MiB DDR2 SiP", "sam9x60"),
-+	AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D1G_EXID_MATCH,
-+		 "sam9x60 128MiB DDR2 SiP", "sam9x60"),
-+	AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D6K_EXID_MATCH,
-+		 "sam9x60 8MiB SDRAM SiP", "sam9x60"),
- #endif
- #ifdef CONFIG_SOC_SAMA5
- 	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
---- a/drivers/soc/atmel/soc.h
-+++ b/drivers/soc/atmel/soc.h
-@@ -60,6 +60,9 @@ at91_soc_init(const struct at91_soc *soc
- #define AT91SAM9CN11_EXID_MATCH		0x00000009
- 
- #define SAM9X60_EXID_MATCH		0x00000000
-+#define SAM9X60_D5M_EXID_MATCH		0x00000001
-+#define SAM9X60_D1G_EXID_MATCH		0x00000010
-+#define SAM9X60_D6K_EXID_MATCH		0x00000011
- 
- #define AT91SAM9XE128_CIDR_MATCH	0x329973a0
- #define AT91SAM9XE256_CIDR_MATCH	0x329a93a0
diff --git a/target/linux/at91/patches-5.10/137-drivers-soc-atmel-use-GENMASK.patch b/target/linux/at91/patches-5.10/137-drivers-soc-atmel-use-GENMASK.patch
deleted file mode 100644
index de99d562f488..000000000000
--- a/target/linux/at91/patches-5.10/137-drivers-soc-atmel-use-GENMASK.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 8d858d9c57a0210ca1ce9e5ba76fab8bdb4d7b39 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Fri, 22 Jan 2021 14:21:32 +0200
-Subject: [PATCH 137/247] drivers: soc: atmel: use GENMASK
-
-Use GENMASK() to define CIDR match mask.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/1611318097-8970-3-git-send-email-claudiu.beznea@microchip.com
----
- drivers/soc/atmel/soc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/soc/atmel/soc.c
-+++ b/drivers/soc/atmel/soc.c
-@@ -27,7 +27,7 @@
- #define AT91_CHIPID_EXID		0x04
- #define AT91_CIDR_VERSION(x)		((x) & 0x1f)
- #define AT91_CIDR_EXT			BIT(31)
--#define AT91_CIDR_MATCH_MASK		0x7fffffe0
-+#define AT91_CIDR_MATCH_MASK		GENMASK(30, 5)
- 
- static const struct at91_soc __initconst socs[] = {
- #ifdef CONFIG_SOC_AT91RM9200
diff --git a/target/linux/at91/patches-5.10/138-drivers-soc-atmel-fix-__initconst-should-be-placed-a.patch b/target/linux/at91/patches-5.10/138-drivers-soc-atmel-fix-__initconst-should-be-placed-a.patch
deleted file mode 100644
index 885528a28e60..000000000000
--- a/target/linux/at91/patches-5.10/138-drivers-soc-atmel-fix-__initconst-should-be-placed-a.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From ed871f95827e9b6d4ee9f9eafec4e18b87fb1a56 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Fri, 22 Jan 2021 14:21:33 +0200
-Subject: [PATCH 138/247] drivers: soc: atmel: fix "__initconst should be
- placed after socs[]" warning
-
-Fix checkpatch.pl warning: "__initconst should be placed after socs[]".
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/1611318097-8970-4-git-send-email-claudiu.beznea@microchip.com
----
- drivers/soc/atmel/soc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/soc/atmel/soc.c
-+++ b/drivers/soc/atmel/soc.c
-@@ -29,7 +29,7 @@
- #define AT91_CIDR_EXT			BIT(31)
- #define AT91_CIDR_MATCH_MASK		GENMASK(30, 5)
- 
--static const struct at91_soc __initconst socs[] = {
-+static const struct at91_soc socs[] __initconst = {
- #ifdef CONFIG_SOC_AT91RM9200
- 	AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
- #endif
diff --git a/target/linux/at91/patches-5.10/139-drivers-soc-atmel-add-per-soc-id-and-version-match-m.patch b/target/linux/at91/patches-5.10/139-drivers-soc-atmel-add-per-soc-id-and-version-match-m.patch
deleted file mode 100644
index 72cdb46f116a..000000000000
--- a/target/linux/at91/patches-5.10/139-drivers-soc-atmel-add-per-soc-id-and-version-match-m.patch
+++ /dev/null
@@ -1,348 +0,0 @@
-From 8f6f7ef363268f417f1729bb0b234326dd1e8e2a Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Fri, 22 Jan 2021 14:21:35 +0200
-Subject: [PATCH 139/247] drivers: soc: atmel: add per soc id and version match
- masks
-
-SAMA7G5 has different masks for chip ID and chip version on CIDR
-register compared to previous AT91 SoCs. For this the commit adapts
-the code for SAMA7G5 addition by introducing 2 new members in
-struct at91_soc and fill them properly and also preparing the
-parsing of proper DT binding.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/1611318097-8970-6-git-send-email-claudiu.beznea@microchip.com
----
- drivers/soc/atmel/soc.c | 199 +++++++++++++++++++++++++++-------------
- drivers/soc/atmel/soc.h |   7 +-
- 2 files changed, 140 insertions(+), 66 deletions(-)
-
---- a/drivers/soc/atmel/soc.c
-+++ b/drivers/soc/atmel/soc.c
-@@ -25,135 +25,200 @@
- #define AT91_DBGU_EXID			0x44
- #define AT91_CHIPID_CIDR		0x00
- #define AT91_CHIPID_EXID		0x04
--#define AT91_CIDR_VERSION(x)		((x) & 0x1f)
-+#define AT91_CIDR_VERSION(x, m)		((x) & (m))
-+#define AT91_CIDR_VERSION_MASK		GENMASK(4, 0)
- #define AT91_CIDR_EXT			BIT(31)
- #define AT91_CIDR_MATCH_MASK		GENMASK(30, 5)
- 
- static const struct at91_soc socs[] __initconst = {
- #ifdef CONFIG_SOC_AT91RM9200
--	AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
-+	AT91_SOC(AT91RM9200_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, 0, "at91rm9200 BGA", "at91rm9200"),
- #endif
- #ifdef CONFIG_SOC_AT91SAM9
--	AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
--	AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
--	AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
--	AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
--	AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
--	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
-+	AT91_SOC(AT91SAM9260_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, 0, "at91sam9260", NULL),
-+	AT91_SOC(AT91SAM9261_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, 0, "at91sam9261", NULL),
-+	AT91_SOC(AT91SAM9263_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, 0, "at91sam9263", NULL),
-+	AT91_SOC(AT91SAM9G20_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, 0, "at91sam9g20", NULL),
-+	AT91_SOC(AT91SAM9RL64_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, 0, "at91sam9rl64", NULL),
-+	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, AT91SAM9M11_EXID_MATCH,
- 		 "at91sam9m11", "at91sam9g45"),
--	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
-+	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, AT91SAM9M10_EXID_MATCH,
- 		 "at91sam9m10", "at91sam9g45"),
--	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
-+	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, AT91SAM9G46_EXID_MATCH,
- 		 "at91sam9g46", "at91sam9g45"),
--	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
-+	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, AT91SAM9G45_EXID_MATCH,
- 		 "at91sam9g45", "at91sam9g45"),
--	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
-+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, AT91SAM9G15_EXID_MATCH,
- 		 "at91sam9g15", "at91sam9x5"),
--	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
-+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, AT91SAM9G35_EXID_MATCH,
- 		 "at91sam9g35", "at91sam9x5"),
--	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
-+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, AT91SAM9X35_EXID_MATCH,
- 		 "at91sam9x35", "at91sam9x5"),
--	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
-+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, AT91SAM9G25_EXID_MATCH,
- 		 "at91sam9g25", "at91sam9x5"),
--	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
-+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, AT91SAM9X25_EXID_MATCH,
- 		 "at91sam9x25", "at91sam9x5"),
--	AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
-+	AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, AT91SAM9CN12_EXID_MATCH,
- 		 "at91sam9cn12", "at91sam9n12"),
--	AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
-+	AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, AT91SAM9N12_EXID_MATCH,
- 		 "at91sam9n12", "at91sam9n12"),
--	AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
-+	AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, AT91SAM9CN11_EXID_MATCH,
- 		 "at91sam9cn11", "at91sam9n12"),
--	AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
--	AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
--	AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
-+	AT91_SOC(AT91SAM9XE128_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, 0, "at91sam9xe128", "at91sam9xe128"),
-+	AT91_SOC(AT91SAM9XE256_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, 0, "at91sam9xe256", "at91sam9xe256"),
-+	AT91_SOC(AT91SAM9XE512_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, 0, "at91sam9xe512", "at91sam9xe512"),
- #endif
- #ifdef CONFIG_SOC_SAM9X60
--	AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_EXID_MATCH, "sam9x60", "sam9x60"),
-+	AT91_SOC(SAM9X60_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAM9X60_EXID_MATCH,
-+		 "sam9x60", "sam9x60"),
- 	AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D5M_EXID_MATCH,
-+		 AT91_CIDR_VERSION_MASK, SAM9X60_EXID_MATCH,
- 		 "sam9x60 64MiB DDR2 SiP", "sam9x60"),
- 	AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D1G_EXID_MATCH,
-+		 AT91_CIDR_VERSION_MASK, SAM9X60_EXID_MATCH,
- 		 "sam9x60 128MiB DDR2 SiP", "sam9x60"),
- 	AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D6K_EXID_MATCH,
-+		 AT91_CIDR_VERSION_MASK, SAM9X60_EXID_MATCH,
- 		 "sam9x60 8MiB SDRAM SiP", "sam9x60"),
- #endif
- #ifdef CONFIG_SOC_SAMA5
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D21CU_EXID_MATCH,
- 		 "sama5d21", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D22CU_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D22CU_EXID_MATCH,
- 		 "sama5d22", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D225C_D1M_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D225C_D1M_EXID_MATCH,
- 		 "sama5d225c 16MiB SiP", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D23CU_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D23CU_EXID_MATCH,
- 		 "sama5d23", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CX_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D24CX_EXID_MATCH,
- 		 "sama5d24", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CU_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D24CU_EXID_MATCH,
- 		 "sama5d24", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D26CU_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D26CU_EXID_MATCH,
- 		 "sama5d26", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CU_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D27CU_EXID_MATCH,
- 		 "sama5d27", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CN_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D27CN_EXID_MATCH,
- 		 "sama5d27", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_D1G_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D27C_D1G_EXID_MATCH,
- 		 "sama5d27c 128MiB SiP", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_D5M_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D27C_D5M_EXID_MATCH,
- 		 "sama5d27c 64MiB SiP", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_LD1G_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D27C_LD1G_EXID_MATCH,
- 		 "sama5d27c 128MiB LPDDR2 SiP", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_LD2G_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D27C_LD2G_EXID_MATCH,
- 		 "sama5d27c 256MiB LPDDR2 SiP", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CU_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D28CU_EXID_MATCH,
- 		 "sama5d28", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CN_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D28CN_EXID_MATCH,
- 		 "sama5d28", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28C_D1G_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D28C_D1G_EXID_MATCH,
- 		 "sama5d28c 128MiB SiP", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28C_LD1G_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D28C_LD1G_EXID_MATCH,
- 		 "sama5d28c 128MiB LPDDR2 SiP", "sama5d2"),
--	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28C_LD2G_EXID_MATCH,
-+	AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D28C_LD2G_EXID_MATCH,
- 		 "sama5d28c 256MiB LPDDR2 SiP", "sama5d2"),
--	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
-+	AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D31_EXID_MATCH,
- 		 "sama5d31", "sama5d3"),
--	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
-+	AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D33_EXID_MATCH,
- 		 "sama5d33", "sama5d3"),
--	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
-+	AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D34_EXID_MATCH,
- 		 "sama5d34", "sama5d3"),
--	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
-+	AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D35_EXID_MATCH,
- 		 "sama5d35", "sama5d3"),
--	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
-+	AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D36_EXID_MATCH,
- 		 "sama5d36", "sama5d3"),
--	AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
-+	AT91_SOC(SAMA5D4_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D41_EXID_MATCH,
- 		 "sama5d41", "sama5d4"),
--	AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
-+	AT91_SOC(SAMA5D4_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D42_EXID_MATCH,
- 		 "sama5d42", "sama5d4"),
--	AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
-+	AT91_SOC(SAMA5D4_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D43_EXID_MATCH,
- 		 "sama5d43", "sama5d4"),
--	AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
-+	AT91_SOC(SAMA5D4_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMA5D44_EXID_MATCH,
- 		 "sama5d44", "sama5d4"),
- #endif
- #ifdef CONFIG_SOC_SAMV7
--	AT91_SOC(SAME70Q21_CIDR_MATCH, SAME70Q21_EXID_MATCH,
-+	AT91_SOC(SAME70Q21_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAME70Q21_EXID_MATCH,
- 		 "same70q21", "same7"),
--	AT91_SOC(SAME70Q20_CIDR_MATCH, SAME70Q20_EXID_MATCH,
-+	AT91_SOC(SAME70Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAME70Q20_EXID_MATCH,
- 		 "same70q20", "same7"),
--	AT91_SOC(SAME70Q19_CIDR_MATCH, SAME70Q19_EXID_MATCH,
-+	AT91_SOC(SAME70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK
-+		 AT91_CIDR_VERSION_MASK, SAME70Q19_EXID_MATCH,
- 		 "same70q19", "same7"),
--	AT91_SOC(SAMS70Q21_CIDR_MATCH, SAMS70Q21_EXID_MATCH,
-+	AT91_SOC(SAMS70Q21_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMS70Q21_EXID_MATCH,
- 		 "sams70q21", "sams7"),
--	AT91_SOC(SAMS70Q20_CIDR_MATCH, SAMS70Q20_EXID_MATCH,
-+	AT91_SOC(SAMS70Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMS70Q20_EXID_MATCH,
- 		 "sams70q20", "sams7"),
--	AT91_SOC(SAMS70Q19_CIDR_MATCH, SAMS70Q19_EXID_MATCH,
-+	AT91_SOC(SAMS70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMS70Q19_EXID_MATCH,
- 		 "sams70q19", "sams7"),
--	AT91_SOC(SAMV71Q21_CIDR_MATCH, SAMV71Q21_EXID_MATCH,
-+	AT91_SOC(SAMV71Q21_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMV71Q21_EXID_MATCH,
- 		 "samv71q21", "samv7"),
--	AT91_SOC(SAMV71Q20_CIDR_MATCH, SAMV71Q20_EXID_MATCH,
-+	AT91_SOC(SAMV71Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMV71Q20_EXID_MATCH,
- 		 "samv71q20", "samv7"),
--	AT91_SOC(SAMV71Q19_CIDR_MATCH, SAMV71Q19_EXID_MATCH,
-+	AT91_SOC(SAMV71Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMV71Q19_EXID_MATCH,
- 		 "samv71q19", "samv7"),
--	AT91_SOC(SAMV70Q20_CIDR_MATCH, SAMV70Q20_EXID_MATCH,
-+	AT91_SOC(SAMV70Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMV70Q20_EXID_MATCH,
- 		 "samv70q20", "samv7"),
--	AT91_SOC(SAMV70Q19_CIDR_MATCH, SAMV70Q19_EXID_MATCH,
-+	AT91_SOC(SAMV70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK, SAMV70Q19_EXID_MATCH,
- 		 "samv70q19", "samv7"),
- #endif
- 	{ /* sentinel */ },
-@@ -191,8 +256,12 @@ static int __init at91_get_cidr_exid_fro
- {
- 	struct device_node *np;
- 	void __iomem *regs;
-+	static const struct of_device_id chipids[] = {
-+		{ .compatible = "atmel,sama5d2-chipid" },
-+		{ },
-+	};
- 
--	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-chipid");
-+	np = of_find_matching_node(NULL, chipids);
- 	if (!np)
- 		return -ENODEV;
- 
-@@ -235,7 +304,7 @@ struct soc_device * __init at91_soc_init
- 	}
- 
- 	for (soc = socs; soc->name; soc++) {
--		if (soc->cidr_match != (cidr & AT91_CIDR_MATCH_MASK))
-+		if (soc->cidr_match != (cidr & soc->cidr_mask))
- 			continue;
- 
- 		if (!(cidr & AT91_CIDR_EXT) || soc->exid_match == exid)
-@@ -254,7 +323,7 @@ struct soc_device * __init at91_soc_init
- 	soc_dev_attr->family = soc->family;
- 	soc_dev_attr->soc_id = soc->name;
- 	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
--					   AT91_CIDR_VERSION(cidr));
-+					   AT91_CIDR_VERSION(cidr, soc->version_mask));
- 	soc_dev = soc_device_register(soc_dev_attr);
- 	if (IS_ERR(soc_dev)) {
- 		kfree(soc_dev_attr->revision);
-@@ -266,7 +335,7 @@ struct soc_device * __init at91_soc_init
- 	if (soc->family)
- 		pr_info("Detected SoC family: %s\n", soc->family);
- 	pr_info("Detected SoC: %s, revision %X\n", soc->name,
--		AT91_CIDR_VERSION(cidr));
-+		AT91_CIDR_VERSION(cidr, soc->version_mask));
- 
- 	return soc_dev;
- }
---- a/drivers/soc/atmel/soc.h
-+++ b/drivers/soc/atmel/soc.h
-@@ -16,14 +16,19 @@
- 
- struct at91_soc {
- 	u32 cidr_match;
-+	u32 cidr_mask;
-+	u32 version_mask;
- 	u32 exid_match;
- 	const char *name;
- 	const char *family;
- };
- 
--#define AT91_SOC(__cidr, __exid, __name, __family)		\
-+#define AT91_SOC(__cidr, __cidr_mask, __version_mask, __exid,	\
-+		 __name, __family)				\
- 	{							\
- 		.cidr_match = (__cidr),				\
-+		.cidr_mask = (__cidr_mask),			\
-+		.version_mask = (__version_mask),		\
- 		.exid_match = (__exid),				\
- 		.name = (__name),				\
- 		.family = (__family),				\
diff --git a/target/linux/at91/patches-5.10/140-drivers-soc-atmel-add-support-for-sama7g5.patch b/target/linux/at91/patches-5.10/140-drivers-soc-atmel-add-support-for-sama7g5.patch
deleted file mode 100644
index 3b2101767326..000000000000
--- a/target/linux/at91/patches-5.10/140-drivers-soc-atmel-add-support-for-sama7g5.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From e20bb57fc51741677a6fcae04e564797fd18921b Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Fri, 22 Jan 2021 14:21:37 +0200
-Subject: [PATCH 140/247] drivers: soc: atmel: add support for sama7g5
-
-Add support for SAMA7G5 SoCs.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/1611318097-8970-8-git-send-email-claudiu.beznea@microchip.com
----
- drivers/soc/atmel/soc.c | 18 ++++++++++++++++++
- drivers/soc/atmel/soc.h |  6 ++++++
- 2 files changed, 24 insertions(+)
-
---- a/drivers/soc/atmel/soc.c
-+++ b/drivers/soc/atmel/soc.c
-@@ -27,8 +27,10 @@
- #define AT91_CHIPID_EXID		0x04
- #define AT91_CIDR_VERSION(x, m)		((x) & (m))
- #define AT91_CIDR_VERSION_MASK		GENMASK(4, 0)
-+#define AT91_CIDR_VERSION_MASK_SAMA7G5	GENMASK(3, 0)
- #define AT91_CIDR_EXT			BIT(31)
- #define AT91_CIDR_MATCH_MASK		GENMASK(30, 5)
-+#define AT91_CIDR_MASK_SAMA7G5		GENMASK(27, 5)
- 
- static const struct at91_soc socs[] __initconst = {
- #ifdef CONFIG_SOC_AT91RM9200
-@@ -221,6 +223,20 @@ static const struct at91_soc socs[] __in
- 		 AT91_CIDR_VERSION_MASK, SAMV70Q19_EXID_MATCH,
- 		 "samv70q19", "samv7"),
- #endif
-+#ifdef CONFIG_SOC_SAMA7
-+	AT91_SOC(SAMA7G5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK_SAMA7G5, SAMA7G51_EXID_MATCH,
-+		 "sama7g51", "sama7g5"),
-+	AT91_SOC(SAMA7G5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK_SAMA7G5, SAMA7G52_EXID_MATCH,
-+		 "sama7g52", "sama7g5"),
-+	AT91_SOC(SAMA7G5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK_SAMA7G5, SAMA7G53_EXID_MATCH,
-+		 "sama7g53", "sama7g5"),
-+	AT91_SOC(SAMA7G5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
-+		 AT91_CIDR_VERSION_MASK_SAMA7G5, SAMA7G54_EXID_MATCH,
-+		 "sama7g54", "sama7g5"),
-+#endif
- 	{ /* sentinel */ },
- };
- 
-@@ -258,6 +274,7 @@ static int __init at91_get_cidr_exid_fro
- 	void __iomem *regs;
- 	static const struct of_device_id chipids[] = {
- 		{ .compatible = "atmel,sama5d2-chipid" },
-+		{ .compatible = "microchip,sama7g5-chipid" },
- 		{ },
- 	};
- 
-@@ -345,6 +362,7 @@ static const struct of_device_id at91_so
- 	{ .compatible = "atmel,at91sam9", },
- 	{ .compatible = "atmel,sama5", },
- 	{ .compatible = "atmel,samv7", },
-+	{ .compatible = "microchip,sama7g5", },
- 	{ }
- };
- 
---- a/drivers/soc/atmel/soc.h
-+++ b/drivers/soc/atmel/soc.h
-@@ -48,6 +48,7 @@ at91_soc_init(const struct at91_soc *soc
- #define AT91SAM9X5_CIDR_MATCH		0x019a05a0
- #define AT91SAM9N12_CIDR_MATCH		0x019a07a0
- #define SAM9X60_CIDR_MATCH		0x019b35a0
-+#define SAMA7G5_CIDR_MATCH		0x00162100
- 
- #define AT91SAM9M11_EXID_MATCH		0x00000001
- #define AT91SAM9M10_EXID_MATCH		0x00000002
-@@ -69,6 +70,11 @@ at91_soc_init(const struct at91_soc *soc
- #define SAM9X60_D1G_EXID_MATCH		0x00000010
- #define SAM9X60_D6K_EXID_MATCH		0x00000011
- 
-+#define SAMA7G51_EXID_MATCH		0x3
-+#define SAMA7G52_EXID_MATCH		0x2
-+#define SAMA7G53_EXID_MATCH		0x1
-+#define SAMA7G54_EXID_MATCH		0x0
-+
- #define AT91SAM9XE128_CIDR_MATCH	0x329973a0
- #define AT91SAM9XE256_CIDR_MATCH	0x329a93a0
- #define AT91SAM9XE512_CIDR_MATCH	0x329aa3a0
diff --git a/target/linux/at91/patches-5.10/141-drivers-soc-atmel-add-spdx-license-identifier.patch b/target/linux/at91/patches-5.10/141-drivers-soc-atmel-add-spdx-license-identifier.patch
deleted file mode 100644
index be238147d659..000000000000
--- a/target/linux/at91/patches-5.10/141-drivers-soc-atmel-add-spdx-license-identifier.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From acd4816cfa7811b13ca2864645f2de41031ccf4d Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Tue, 26 Jan 2021 11:29:30 +0200
-Subject: [PATCH 141/247] drivers: soc: atmel: add spdx license identifier
-
-Add SPDX-License-Identifier.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-[nicolas.ferre@microhcip.com: remove license boilerplate now it's useless]
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/1611653376-24168-2-git-send-email-claudiu.beznea@microchip.com
----
- drivers/soc/atmel/soc.c | 6 +-----
- drivers/soc/atmel/soc.h | 6 +-----
- 2 files changed, 2 insertions(+), 10 deletions(-)
-
---- a/drivers/soc/atmel/soc.c
-+++ b/drivers/soc/atmel/soc.c
-@@ -1,13 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-only
- /*
-  * Copyright (C) 2015 Atmel
-  *
-  * Alexandre Belloni <alexandre.belloni@free-electrons.com
-  * Boris Brezillon <boris.brezillon@free-electrons.com
-- *
-- * This file is licensed under the terms of the GNU General Public
-- * License version 2.  This program is licensed "as is" without any
-- * warranty of any kind, whether express or implied.
-- *
-  */
- 
- #define pr_fmt(fmt)	"AT91: " fmt
---- a/drivers/soc/atmel/soc.h
-+++ b/drivers/soc/atmel/soc.h
-@@ -1,12 +1,8 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
- /*
-  * Copyright (C) 2015 Atmel
-  *
-  * Boris Brezillon <boris.brezillon@free-electrons.com
-- *
-- * This file is licensed under the terms of the GNU General Public
-- * License version 2.  This program is licensed "as is" without any
-- * warranty of any kind, whether express or implied.
-- *
-  */
- 
- #ifndef __AT91_SOC_H
diff --git a/target/linux/at91/patches-5.10/142-drivers-soc-atmel-fix-type-for-same7.patch b/target/linux/at91/patches-5.10/142-drivers-soc-atmel-fix-type-for-same7.patch
deleted file mode 100644
index c28101300be8..000000000000
--- a/target/linux/at91/patches-5.10/142-drivers-soc-atmel-fix-type-for-same7.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From b105d1dfab46c13070b8bdea1ab28d223a9c1bee Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Thu, 4 Feb 2021 16:49:25 +0100
-Subject: [PATCH 142/247] drivers: soc: atmel: fix type for same7
-
-A missing comma caused a build failure:
-
-drivers/soc/atmel/soc.c:196:24: error: too few arguments provided to function-like macro invocation
-
-Fixes: af3a10513cd6 ("drivers: soc: atmel: add per soc id and version match masks")
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
- drivers/soc/atmel/soc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/soc/atmel/soc.c
-+++ b/drivers/soc/atmel/soc.c
-@@ -191,7 +191,7 @@ static const struct at91_soc socs[] __in
- 	AT91_SOC(SAME70Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
- 		 AT91_CIDR_VERSION_MASK, SAME70Q20_EXID_MATCH,
- 		 "same70q20", "same7"),
--	AT91_SOC(SAME70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK
-+	AT91_SOC(SAME70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
- 		 AT91_CIDR_VERSION_MASK, SAME70Q19_EXID_MATCH,
- 		 "same70q19", "same7"),
- 	AT91_SOC(SAMS70Q21_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
diff --git a/target/linux/at91/patches-5.10/143-clocksource-drivers-timer-microchip-pit64b-Add-clock.patch b/target/linux/at91/patches-5.10/143-clocksource-drivers-timer-microchip-pit64b-Add-clock.patch
deleted file mode 100644
index 7b2462cd009f..000000000000
--- a/target/linux/at91/patches-5.10/143-clocksource-drivers-timer-microchip-pit64b-Add-clock.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-From 5f090a664d62ceeaf9a0f482426e35cab18d65a9 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Tue, 19 Jan 2021 14:59:25 +0200
-Subject: [PATCH 143/247] clocksource/drivers/timer-microchip-pit64b: Add
- clocksource suspend/resume
-
-Add suspend/resume support for clocksource timer.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
----
- drivers/clocksource/timer-microchip-pit64b.c | 86 ++++++++++++++++----
- 1 file changed, 71 insertions(+), 15 deletions(-)
-
---- a/drivers/clocksource/timer-microchip-pit64b.c
-+++ b/drivers/clocksource/timer-microchip-pit64b.c
-@@ -71,10 +71,24 @@ struct mchp_pit64b_clkevt {
- 	struct clock_event_device	clkevt;
- };
- 
--#define to_mchp_pit64b_timer(x) \
-+#define clkevt_to_mchp_pit64b_timer(x) \
- 	((struct mchp_pit64b_timer *)container_of(x,\
- 		struct mchp_pit64b_clkevt, clkevt))
- 
-+/**
-+ * mchp_pit64b_clksrc - PIT64B clocksource data structure
-+ * @timer: PIT64B timer
-+ * @clksrc: clocksource
-+ */
-+struct mchp_pit64b_clksrc {
-+	struct mchp_pit64b_timer	timer;
-+	struct clocksource		clksrc;
-+};
-+
-+#define clksrc_to_mchp_pit64b_timer(x) \
-+	((struct mchp_pit64b_timer *)container_of(x,\
-+		struct mchp_pit64b_clksrc, clksrc))
-+
- /* Base address for clocksource timer. */
- static void __iomem *mchp_pit64b_cs_base;
- /* Default cycles for clockevent timer. */
-@@ -116,6 +130,36 @@ static inline void mchp_pit64b_reset(str
- 	writel_relaxed(MCHP_PIT64B_CR_START, timer->base + MCHP_PIT64B_CR);
- }
- 
-+static void mchp_pit64b_suspend(struct mchp_pit64b_timer *timer)
-+{
-+	writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
-+	if (timer->mode & MCHP_PIT64B_MR_SGCLK)
-+		clk_disable_unprepare(timer->gclk);
-+	clk_disable_unprepare(timer->pclk);
-+}
-+
-+static void mchp_pit64b_resume(struct mchp_pit64b_timer *timer)
-+{
-+	clk_prepare_enable(timer->pclk);
-+	if (timer->mode & MCHP_PIT64B_MR_SGCLK)
-+		clk_prepare_enable(timer->gclk);
-+}
-+
-+static void mchp_pit64b_clksrc_suspend(struct clocksource *cs)
-+{
-+	struct mchp_pit64b_timer *timer = clksrc_to_mchp_pit64b_timer(cs);
-+
-+	mchp_pit64b_suspend(timer);
-+}
-+
-+static void mchp_pit64b_clksrc_resume(struct clocksource *cs)
-+{
-+	struct mchp_pit64b_timer *timer = clksrc_to_mchp_pit64b_timer(cs);
-+
-+	mchp_pit64b_resume(timer);
-+	mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0);
-+}
-+
- static u64 mchp_pit64b_clksrc_read(struct clocksource *cs)
- {
- 	return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
-@@ -128,7 +172,7 @@ static u64 notrace mchp_pit64b_sched_rea
- 
- static int mchp_pit64b_clkevt_shutdown(struct clock_event_device *cedev)
- {
--	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
-+	struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
- 
- 	writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
- 
-@@ -137,7 +181,7 @@ static int mchp_pit64b_clkevt_shutdown(s
- 
- static int mchp_pit64b_clkevt_set_periodic(struct clock_event_device *cedev)
- {
--	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
-+	struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
- 
- 	mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_CONT,
- 			  MCHP_PIT64B_IER_PERIOD);
-@@ -148,7 +192,7 @@ static int mchp_pit64b_clkevt_set_period
- static int mchp_pit64b_clkevt_set_next_event(unsigned long evt,
- 					     struct clock_event_device *cedev)
- {
--	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
-+	struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
- 
- 	mchp_pit64b_reset(timer, evt, MCHP_PIT64B_MR_ONE_SHOT,
- 			  MCHP_PIT64B_IER_PERIOD);
-@@ -158,21 +202,16 @@ static int mchp_pit64b_clkevt_set_next_e
- 
- static void mchp_pit64b_clkevt_suspend(struct clock_event_device *cedev)
- {
--	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
-+	struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
- 
--	writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
--	if (timer->mode & MCHP_PIT64B_MR_SGCLK)
--		clk_disable_unprepare(timer->gclk);
--	clk_disable_unprepare(timer->pclk);
-+	mchp_pit64b_suspend(timer);
- }
- 
- static void mchp_pit64b_clkevt_resume(struct clock_event_device *cedev)
- {
--	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
-+	struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
- 
--	clk_prepare_enable(timer->pclk);
--	if (timer->mode & MCHP_PIT64B_MR_SGCLK)
--		clk_prepare_enable(timer->gclk);
-+	mchp_pit64b_resume(timer);
- }
- 
- static irqreturn_t mchp_pit64b_interrupt(int irq, void *dev_id)
-@@ -296,20 +335,37 @@ done:
- static int __init mchp_pit64b_init_clksrc(struct mchp_pit64b_timer *timer,
- 					  u32 clk_rate)
- {
-+	struct mchp_pit64b_clksrc *cs;
- 	int ret;
- 
-+	cs = kzalloc(sizeof(*cs), GFP_KERNEL);
-+	if (!cs)
-+		return -ENOMEM;
-+
- 	mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0);
- 
- 	mchp_pit64b_cs_base = timer->base;
- 
--	ret = clocksource_mmio_init(timer->base, MCHP_PIT64B_NAME, clk_rate,
--				    210, 64, mchp_pit64b_clksrc_read);
-+	cs->timer.base = timer->base;
-+	cs->timer.pclk = timer->pclk;
-+	cs->timer.gclk = timer->gclk;
-+	cs->timer.mode = timer->mode;
-+	cs->clksrc.name = MCHP_PIT64B_NAME;
-+	cs->clksrc.mask = CLOCKSOURCE_MASK(64);
-+	cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
-+	cs->clksrc.rating = 210;
-+	cs->clksrc.read = mchp_pit64b_clksrc_read;
-+	cs->clksrc.suspend = mchp_pit64b_clksrc_suspend;
-+	cs->clksrc.resume = mchp_pit64b_clksrc_resume;
-+
-+	ret = clocksource_register_hz(&cs->clksrc, clk_rate);
- 	if (ret) {
- 		pr_debug("clksrc: Failed to register PIT64B clocksource!\n");
- 
- 		/* Stop timer. */
- 		writel_relaxed(MCHP_PIT64B_CR_SWRST,
- 			       timer->base + MCHP_PIT64B_CR);
-+		kfree(cs);
- 
- 		return ret;
- 	}
diff --git a/target/linux/at91/patches-5.10/144-ASoC-atmel-pdc-Use-managed-DMA-buffer-allocation.patch b/target/linux/at91/patches-5.10/144-ASoC-atmel-pdc-Use-managed-DMA-buffer-allocation.patch
deleted file mode 100644
index 072e13bcc61f..000000000000
--- a/target/linux/at91/patches-5.10/144-ASoC-atmel-pdc-Use-managed-DMA-buffer-allocation.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From 0b20c174a17dcfa805ddac1301a5af7298877ec3 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Wed, 6 Jan 2021 14:36:48 +0100
-Subject: [PATCH 144/247] ASoC: atmel-pdc: Use managed DMA buffer allocation
-
-Instead of manually managing its DMA buffers using
-dma_{alloc,free}_coherent() lets the sound core take care of this using
-managed buffers.
-
-On one hand this reduces the amount of boiler plate code, but the main
-motivation for the change is to use the shared code where possible. This
-makes it easier to argue about correctness and that the code does not
-contain subtle bugs like data leakage or similar.
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
-Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Link: https://lore.kernel.org/r/20210106133650.13509-1-lars@metafoo.de
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/atmel/atmel-pcm-pdc.c | 78 ++-------------------------------
- 1 file changed, 4 insertions(+), 74 deletions(-)
-
---- a/sound/soc/atmel/atmel-pcm-pdc.c
-+++ b/sound/soc/atmel/atmel-pcm-pdc.c
-@@ -34,86 +34,21 @@
- #include "atmel-pcm.h"
- 
- 
--static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
--	int stream)
--{
--	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
--	struct snd_dma_buffer *buf = &substream->dma_buffer;
--	size_t size = ATMEL_SSC_DMABUF_SIZE;
--
--	buf->dev.type = SNDRV_DMA_TYPE_DEV;
--	buf->dev.dev = pcm->card->dev;
--	buf->private_data = NULL;
--	buf->area = dma_alloc_coherent(pcm->card->dev, size,
--			&buf->addr, GFP_KERNEL);
--	pr_debug("atmel-pcm: alloc dma buffer: area=%p, addr=%p, size=%zu\n",
--			(void *)buf->area, (void *)(long)buf->addr, size);
--
--	if (!buf->area)
--		return -ENOMEM;
--
--	buf->bytes = size;
--	return 0;
--}
--
--static int atmel_pcm_mmap(struct snd_soc_component *component,
--			  struct snd_pcm_substream *substream,
--			  struct vm_area_struct *vma)
--{
--	return remap_pfn_range(vma, vma->vm_start,
--		       substream->dma_buffer.addr >> PAGE_SHIFT,
--		       vma->vm_end - vma->vm_start, vma->vm_page_prot);
--}
--
- static int atmel_pcm_new(struct snd_soc_component *component,
- 			 struct snd_soc_pcm_runtime *rtd)
- {
- 	struct snd_card *card = rtd->card->snd_card;
--	struct snd_pcm *pcm = rtd->pcm;
- 	int ret;
- 
- 	ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
- 	if (ret)
- 		return ret;
- 
--	if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
--		pr_debug("atmel-pcm: allocating PCM playback DMA buffer\n");
--		ret = atmel_pcm_preallocate_dma_buffer(pcm,
--			SNDRV_PCM_STREAM_PLAYBACK);
--		if (ret)
--			goto out;
--	}
-+	snd_pcm_set_managed_buffer_all(rtd->pcm, SNDRV_DMA_TYPE_DEV,
-+				       card->dev, ATMEL_SSC_DMABUF_SIZE,
-+				       ATMEL_SSC_DMABUF_SIZE);
- 
--	if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
--		pr_debug("atmel-pcm: allocating PCM capture DMA buffer\n");
--		ret = atmel_pcm_preallocate_dma_buffer(pcm,
--			SNDRV_PCM_STREAM_CAPTURE);
--		if (ret)
--			goto out;
--	}
-- out:
--	return ret;
--}
--
--static void atmel_pcm_free(struct snd_soc_component *component,
--			   struct snd_pcm *pcm)
--{
--	struct snd_pcm_substream *substream;
--	struct snd_dma_buffer *buf;
--	int stream;
--
--	for (stream = 0; stream < 2; stream++) {
--		substream = pcm->streams[stream].substream;
--		if (!substream)
--			continue;
--
--		buf = &substream->dma_buffer;
--		if (!buf->area)
--			continue;
--		dma_free_coherent(pcm->card->dev, buf->bytes,
--				  buf->area, buf->addr);
--		buf->area = NULL;
--	}
-+	return 0;
- }
- 
- /*--------------------------------------------------------------------------*\
-@@ -210,9 +145,6 @@ static int atmel_pcm_hw_params(struct sn
- 	/* this may get called several times by oss emulation
- 	 * with different params */
- 
--	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
--	runtime->dma_bytes = params_buffer_bytes(params);
--
- 	prtd->params = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
- 	prtd->params->dma_intr_handler = atmel_pcm_dma_irq;
- 
-@@ -384,9 +316,7 @@ static const struct snd_soc_component_dr
- 	.prepare	= atmel_pcm_prepare,
- 	.trigger	= atmel_pcm_trigger,
- 	.pointer	= atmel_pcm_pointer,
--	.mmap		= atmel_pcm_mmap,
- 	.pcm_construct	= atmel_pcm_new,
--	.pcm_destruct	= atmel_pcm_free,
- };
- 
- int atmel_pcm_pdc_platform_register(struct device *dev)
diff --git a/target/linux/at91/patches-5.10/145-power-reset-at91-sama5d2_shdwc-add-support-for-sama7.patch b/target/linux/at91/patches-5.10/145-power-reset-at91-sama5d2_shdwc-add-support-for-sama7.patch
deleted file mode 100644
index af1c01bf90f3..000000000000
--- a/target/linux/at91/patches-5.10/145-power-reset-at91-sama5d2_shdwc-add-support-for-sama7.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From f39f2312a68ec0843adba08f9c9182ffa5624190 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 16 Dec 2020 14:57:33 +0200
-Subject: [PATCH 145/247] power: reset: at91-sama5d2_shdwc: add support for
- sama7g5
-
-Add support for SAMA7G5 by adding proper struct reg_config structure
-and since SAMA7G5 is not currently on LPDDR setups the commit also
-avoid the mapping of DDR controller.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
----
- drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++------
- 1 file changed, 54 insertions(+), 18 deletions(-)
-
---- a/drivers/power/reset/at91-sama5d2_shdwc.c
-+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
-@@ -78,9 +78,15 @@ struct pmc_reg_config {
- 	u8 mckr;
- };
- 
-+struct ddrc_reg_config {
-+	u32 type_offset;
-+	u32 type_mask;
-+};
-+
- struct reg_config {
- 	struct shdwc_reg_config shdwc;
- 	struct pmc_reg_config pmc;
-+	struct ddrc_reg_config ddrc;
- };
- 
- struct shdwc {
-@@ -262,6 +268,10 @@ static const struct reg_config sama5d2_r
- 	.pmc = {
- 		.mckr		= 0x30,
- 	},
-+	.ddrc = {
-+		.type_offset	= AT91_DDRSDRC_MDR,
-+		.type_mask	= AT91_DDRSDRC_MD
-+	},
- };
- 
- static const struct reg_config sam9x60_reg_config = {
-@@ -275,6 +285,23 @@ static const struct reg_config sam9x60_r
- 	.pmc = {
- 		.mckr		= 0x28,
- 	},
-+	.ddrc = {
-+		.type_offset	= AT91_DDRSDRC_MDR,
-+		.type_mask	= AT91_DDRSDRC_MD
-+	},
-+};
-+
-+static const struct reg_config sama7g5_reg_config = {
-+	.shdwc = {
-+		.wkup_pin_input = 0,
-+		.mr_rtcwk_shift = 17,
-+		.mr_rttwk_shift = 16,
-+		.sr_rtcwk_shift = 5,
-+		.sr_rttwk_shift = 4,
-+	},
-+	.pmc = {
-+		.mckr		= 0x28,
-+	},
- };
- 
- static const struct of_device_id at91_shdwc_of_match[] = {
-@@ -285,6 +312,10 @@ static const struct of_device_id at91_sh
- 	{
- 		.compatible = "microchip,sam9x60-shdwc",
- 		.data = &sam9x60_reg_config,
-+	},
-+	{
-+		.compatible = "microchip,sama7g5-shdwc",
-+		.data = &sama7g5_reg_config,
- 	}, {
- 		/*sentinel*/
- 	}
-@@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_ma
- static const struct of_device_id at91_pmc_ids[] = {
- 	{ .compatible = "atmel,sama5d2-pmc" },
- 	{ .compatible = "microchip,sam9x60-pmc" },
-+	{ .compatible = "microchip,sama7g5-pmc" },
- 	{ /* Sentinel. */ }
- };
- 
-@@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struc
- 		goto clk_disable;
- 	}
- 
--	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
--	if (!np) {
--		ret = -ENODEV;
--		goto unmap;
--	}
-+	if (at91_shdwc->rcfg->ddrc.type_mask) {
-+		np = of_find_compatible_node(NULL, NULL,
-+					     "atmel,sama5d3-ddramc");
-+		if (!np) {
-+			ret = -ENODEV;
-+			goto unmap;
-+		}
- 
--	at91_shdwc->mpddrc_base = of_iomap(np, 0);
--	of_node_put(np);
-+		at91_shdwc->mpddrc_base = of_iomap(np, 0);
-+		of_node_put(np);
- 
--	if (!at91_shdwc->mpddrc_base) {
--		ret = -ENOMEM;
--		goto unmap;
-+		if (!at91_shdwc->mpddrc_base) {
-+			ret = -ENOMEM;
-+			goto unmap;
-+		}
-+
-+		ddr_type = readl(at91_shdwc->mpddrc_base +
-+				 at91_shdwc->rcfg->ddrc.type_offset) &
-+				 at91_shdwc->rcfg->ddrc.type_mask;
-+		if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
-+		    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
-+			iounmap(at91_shdwc->mpddrc_base);
-+			at91_shdwc->mpddrc_base = NULL;
-+		}
- 	}
- 
- 	pm_power_off = at91_poweroff;
- 
--	ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
--			 AT91_DDRSDRC_MD;
--	if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
--	    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
--		iounmap(at91_shdwc->mpddrc_base);
--		at91_shdwc->mpddrc_base = NULL;
--	}
--
- 	return 0;
- 
- unmap:
diff --git a/target/linux/at91/patches-5.10/146-pinctrl-at91-pio4-add-support-for-slew-rate.patch b/target/linux/at91/patches-5.10/146-pinctrl-at91-pio4-add-support-for-slew-rate.patch
deleted file mode 100644
index 84dea5a48acd..000000000000
--- a/target/linux/at91/patches-5.10/146-pinctrl-at91-pio4-add-support-for-slew-rate.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From bd819c78346012ae0627b1cd4f6ceb1b51162c71 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 27 Jan 2021 13:45:44 +0200
-Subject: [PATCH 146/247] pinctrl: at91-pio4: add support for slew-rate
-
-SAMA7G5 supports slew rate configuration. Adapt the driver for this.
-For output switching frequencies lower than 50MHz the slew rate needs to
-be enabled. Since most of the pins on SAMA7G5 fall into this category
-enabled the slew rate by default.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
-Link: https://lore.kernel.org/r/1611747945-29960-3-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-at91-pio4.c | 27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/drivers/pinctrl/pinctrl-at91-pio4.c
-+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
-@@ -36,6 +36,7 @@
- #define		ATMEL_PIO_DIR_MASK		BIT(8)
- #define		ATMEL_PIO_PUEN_MASK		BIT(9)
- #define		ATMEL_PIO_PDEN_MASK		BIT(10)
-+#define		ATMEL_PIO_SR_MASK		BIT(11)
- #define		ATMEL_PIO_IFEN_MASK		BIT(12)
- #define		ATMEL_PIO_IFSCEN_MASK		BIT(13)
- #define		ATMEL_PIO_OPD_MASK		BIT(14)
-@@ -76,10 +77,12 @@
-  * @nbanks: number of PIO banks
-  * @last_bank_count: number of lines in the last bank (can be less than
-  *	the rest of the banks).
-+ * @slew_rate_support: slew rate support
-  */
- struct atmel_pioctrl_data {
- 	unsigned nbanks;
- 	unsigned last_bank_count;
-+	unsigned int slew_rate_support;
- };
- 
- struct atmel_group {
-@@ -117,6 +120,7 @@ struct atmel_pin {
-  * @pm_suspend_backup: backup/restore register values on suspend/resume
-  * @dev: device entry for the Atmel PIO controller.
-  * @node: node of the Atmel PIO controller.
-+ * @slew_rate_support: slew rate support
-  */
- struct atmel_pioctrl {
- 	void __iomem		*reg_base;
-@@ -138,6 +142,7 @@ struct atmel_pioctrl {
- 	} *pm_suspend_backup;
- 	struct device		*dev;
- 	struct device_node	*node;
-+	unsigned int		slew_rate_support;
- };
- 
- static const char * const atmel_functions[] = {
-@@ -760,6 +765,13 @@ static int atmel_conf_pin_config_group_g
- 			return -EINVAL;
- 		arg = 1;
- 		break;
-+	case PIN_CONFIG_SLEW_RATE:
-+		if (!atmel_pioctrl->slew_rate_support)
-+			return -EOPNOTSUPP;
-+		if (!(res & ATMEL_PIO_SR_MASK))
-+			return -EINVAL;
-+		arg = 1;
-+		break;
- 	case ATMEL_PIN_CONFIG_DRIVE_STRENGTH:
- 		if (!(res & ATMEL_PIO_DRVSTR_MASK))
- 			return -EINVAL;
-@@ -793,6 +805,10 @@ static int atmel_conf_pin_config_group_s
- 		dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n",
- 			__func__, pin_id, configs[i]);
- 
-+		/* Keep slew rate enabled by default. */
-+		if (atmel_pioctrl->slew_rate_support)
-+			conf |= ATMEL_PIO_SR_MASK;
-+
- 		switch (param) {
- 		case PIN_CONFIG_BIAS_DISABLE:
- 			conf &= (~ATMEL_PIO_PUEN_MASK);
-@@ -850,6 +866,13 @@ static int atmel_conf_pin_config_group_s
- 					ATMEL_PIO_SODR);
- 			}
- 			break;
-+		case PIN_CONFIG_SLEW_RATE:
-+			if (!atmel_pioctrl->slew_rate_support)
-+				break;
-+			/* And remove it if explicitly requested. */
-+			if (arg == 0)
-+				conf &= ~ATMEL_PIO_SR_MASK;
-+			break;
- 		case ATMEL_PIN_CONFIG_DRIVE_STRENGTH:
- 			switch (arg) {
- 			case ATMEL_PIO_DRVSTR_LO:
-@@ -901,6 +924,8 @@ static void atmel_conf_pin_config_dbg_sh
- 		seq_printf(s, "%s ", "open-drain");
- 	if (conf & ATMEL_PIO_SCHMITT_MASK)
- 		seq_printf(s, "%s ", "schmitt");
-+	if (atmel_pioctrl->slew_rate_support && (conf & ATMEL_PIO_SR_MASK))
-+		seq_printf(s, "%s ", "slew-rate");
- 	if (conf & ATMEL_PIO_DRVSTR_MASK) {
- 		switch ((conf & ATMEL_PIO_DRVSTR_MASK) >> ATMEL_PIO_DRVSTR_OFFSET) {
- 		case ATMEL_PIO_DRVSTR_ME:
-@@ -994,6 +1019,7 @@ static const struct atmel_pioctrl_data a
- static const struct atmel_pioctrl_data microchip_sama7g5_pioctrl_data = {
- 	.nbanks			= 5,
- 	.last_bank_count	= 8, /* sama7g5 has only PE0 to PE7 */
-+	.slew_rate_support	= 1,
- };
- 
- static const struct of_device_id atmel_pctrl_of_match[] = {
-@@ -1039,6 +1065,7 @@ static int atmel_pinctrl_probe(struct pl
- 		atmel_pioctrl->npins -= ATMEL_PIO_NPINS_PER_BANK;
- 		atmel_pioctrl->npins += atmel_pioctrl_data->last_bank_count;
- 	}
-+	atmel_pioctrl->slew_rate_support = atmel_pioctrl_data->slew_rate_support;
- 
- 	atmel_pioctrl->reg_base = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(atmel_pioctrl->reg_base))
diff --git a/target/linux/at91/patches-5.10/147-pinctrl-at91-pio4-fix-Prefer-unsigned-int-to-bare-us.patch b/target/linux/at91/patches-5.10/147-pinctrl-at91-pio4-fix-Prefer-unsigned-int-to-bare-us.patch
deleted file mode 100644
index 0be811cc97aa..000000000000
--- a/target/linux/at91/patches-5.10/147-pinctrl-at91-pio4-fix-Prefer-unsigned-int-to-bare-us.patch
+++ /dev/null
@@ -1,340 +0,0 @@
-From 99629d1ad7e4e03ac3324d36b703220555b65566 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 27 Jan 2021 13:45:45 +0200
-Subject: [PATCH 147/247] pinctrl: at91-pio4: fix "Prefer 'unsigned int' to
- bare use of 'unsigned'"
-
-Fix "Prefer 'unsigned int' to bare use of 'unsigned'" checkpatch.pl
-warning.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
-Link: https://lore.kernel.org/r/1611747945-29960-4-git-send-email-claudiu.beznea@microchip.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-at91-pio4.c | 110 ++++++++++++++--------------
- 1 file changed, 57 insertions(+), 53 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-at91-pio4.c
-+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
-@@ -80,8 +80,8 @@
-  * @slew_rate_support: slew rate support
-  */
- struct atmel_pioctrl_data {
--	unsigned nbanks;
--	unsigned last_bank_count;
-+	unsigned int nbanks;
-+	unsigned int last_bank_count;
- 	unsigned int slew_rate_support;
- };
- 
-@@ -91,11 +91,11 @@ struct atmel_group {
- };
- 
- struct atmel_pin {
--	unsigned pin_id;
--	unsigned mux;
--	unsigned ioset;
--	unsigned bank;
--	unsigned line;
-+	unsigned int pin_id;
-+	unsigned int mux;
-+	unsigned int ioset;
-+	unsigned int bank;
-+	unsigned int line;
- 	const char *device;
- };
- 
-@@ -125,16 +125,16 @@ struct atmel_pin {
- struct atmel_pioctrl {
- 	void __iomem		*reg_base;
- 	struct clk		*clk;
--	unsigned		nbanks;
-+	unsigned int		nbanks;
- 	struct pinctrl_dev	*pinctrl_dev;
- 	struct atmel_group	*groups;
- 	const char * const	*group_names;
- 	struct atmel_pin	**pins;
--	unsigned		npins;
-+	unsigned int		npins;
- 	struct gpio_chip	*gpio_chip;
- 	struct irq_domain	*irq_domain;
- 	int			*irqs;
--	unsigned		*pm_wakeup_sources;
-+	unsigned int		*pm_wakeup_sources;
- 	struct {
- 		u32		imr;
- 		u32		odsr;
-@@ -177,11 +177,11 @@ static void atmel_gpio_irq_ack(struct ir
- 	 */
- }
- 
--static int atmel_gpio_irq_set_type(struct irq_data *d, unsigned type)
-+static int atmel_gpio_irq_set_type(struct irq_data *d, unsigned int type)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = irq_data_get_irq_chip_data(d);
- 	struct atmel_pin *pin = atmel_pioctrl->pins[d->hwirq];
--	unsigned reg;
-+	unsigned int reg;
- 
- 	atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_MSKR,
- 			 BIT(pin->line));
-@@ -268,7 +268,7 @@ static struct irq_chip atmel_gpio_irq_ch
- 	.irq_set_wake	= atmel_gpio_irq_set_wake,
- };
- 
--static int atmel_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-+static int atmel_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
- 
-@@ -316,11 +316,12 @@ static void atmel_gpio_irq_handler(struc
- 	chained_irq_exit(chip, desc);
- }
- 
--static int atmel_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-+static int atmel_gpio_direction_input(struct gpio_chip *chip,
-+				      unsigned int offset)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
- 	struct atmel_pin *pin = atmel_pioctrl->pins[offset];
--	unsigned reg;
-+	unsigned int reg;
- 
- 	atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_MSKR,
- 			 BIT(pin->line));
-@@ -331,11 +332,11 @@ static int atmel_gpio_direction_input(st
- 	return 0;
- }
- 
--static int atmel_gpio_get(struct gpio_chip *chip, unsigned offset)
-+static int atmel_gpio_get(struct gpio_chip *chip, unsigned int offset)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
- 	struct atmel_pin *pin = atmel_pioctrl->pins[offset];
--	unsigned reg;
-+	unsigned int reg;
- 
- 	reg = atmel_gpio_read(atmel_pioctrl, pin->bank, ATMEL_PIO_PDSR);
- 
-@@ -369,12 +370,13 @@ static int atmel_gpio_get_multiple(struc
- 	return 0;
- }
- 
--static int atmel_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
-+static int atmel_gpio_direction_output(struct gpio_chip *chip,
-+				       unsigned int offset,
- 				       int value)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
- 	struct atmel_pin *pin = atmel_pioctrl->pins[offset];
--	unsigned reg;
-+	unsigned int reg;
- 
- 	atmel_gpio_write(atmel_pioctrl, pin->bank,
- 			 value ? ATMEL_PIO_SODR : ATMEL_PIO_CODR,
-@@ -389,7 +391,7 @@ static int atmel_gpio_direction_output(s
- 	return 0;
- }
- 
--static void atmel_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
-+static void atmel_gpio_set(struct gpio_chip *chip, unsigned int offset, int val)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
- 	struct atmel_pin *pin = atmel_pioctrl->pins[offset];
-@@ -445,11 +447,11 @@ static struct gpio_chip atmel_gpio_chip
- 
- /* --- PINCTRL --- */
- static unsigned int atmel_pin_config_read(struct pinctrl_dev *pctldev,
--					  unsigned pin_id)
-+					  unsigned int pin_id)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
--	unsigned bank = atmel_pioctrl->pins[pin_id]->bank;
--	unsigned line = atmel_pioctrl->pins[pin_id]->line;
-+	unsigned int bank = atmel_pioctrl->pins[pin_id]->bank;
-+	unsigned int line = atmel_pioctrl->pins[pin_id]->line;
- 	void __iomem *addr = atmel_pioctrl->reg_base
- 			     + bank * ATMEL_PIO_BANK_OFFSET;
- 
-@@ -461,11 +463,11 @@ static unsigned int atmel_pin_config_rea
- }
- 
- static void atmel_pin_config_write(struct pinctrl_dev *pctldev,
--				   unsigned pin_id, u32 conf)
-+				   unsigned int pin_id, u32 conf)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
--	unsigned bank = atmel_pioctrl->pins[pin_id]->bank;
--	unsigned line = atmel_pioctrl->pins[pin_id]->line;
-+	unsigned int bank = atmel_pioctrl->pins[pin_id]->bank;
-+	unsigned int line = atmel_pioctrl->pins[pin_id]->line;
- 	void __iomem *addr = atmel_pioctrl->reg_base
- 			     + bank * ATMEL_PIO_BANK_OFFSET;
- 
-@@ -483,7 +485,7 @@ static int atmel_pctl_get_groups_count(s
- }
- 
- static const char *atmel_pctl_get_group_name(struct pinctrl_dev *pctldev,
--					     unsigned selector)
-+					     unsigned int selector)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
- 
-@@ -491,19 +493,20 @@ static const char *atmel_pctl_get_group_
- }
- 
- static int atmel_pctl_get_group_pins(struct pinctrl_dev *pctldev,
--				     unsigned selector, const unsigned **pins,
--				     unsigned *num_pins)
-+				     unsigned int selector,
-+				     const unsigned int **pins,
-+				     unsigned int *num_pins)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
- 
--	*pins = (unsigned *)&atmel_pioctrl->groups[selector].pin;
-+	*pins = (unsigned int *)&atmel_pioctrl->groups[selector].pin;
- 	*num_pins = 1;
- 
- 	return 0;
- }
- 
- static struct atmel_group *
--atmel_pctl_find_group_by_pin(struct pinctrl_dev *pctldev, unsigned pin)
-+atmel_pctl_find_group_by_pin(struct pinctrl_dev *pctldev, unsigned int pin)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
- 	int i;
-@@ -524,7 +527,7 @@ static int atmel_pctl_xlate_pinfunc(stru
- 				    const char **func_name)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
--	unsigned pin_id, func_id;
-+	unsigned int pin_id, func_id;
- 	struct atmel_group *grp;
- 
- 	pin_id = ATMEL_GET_PIN_NO(pinfunc);
-@@ -554,10 +557,10 @@ static int atmel_pctl_xlate_pinfunc(stru
- static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
- 					struct device_node *np,
- 					struct pinctrl_map **map,
--					unsigned *reserved_maps,
--					unsigned *num_maps)
-+					unsigned int *reserved_maps,
-+					unsigned int *num_maps)
- {
--	unsigned num_pins, num_configs, reserve;
-+	unsigned int num_pins, num_configs, reserve;
- 	unsigned long *configs;
- 	struct property	*pins;
- 	u32 pinfunc;
-@@ -628,10 +631,10 @@ exit:
- static int atmel_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
- 				     struct device_node *np_config,
- 				     struct pinctrl_map **map,
--				     unsigned *num_maps)
-+				     unsigned int *num_maps)
- {
- 	struct device_node *np;
--	unsigned reserved_maps;
-+	unsigned int reserved_maps;
- 	int ret;
- 
- 	*map = NULL;
-@@ -679,13 +682,13 @@ static int atmel_pmx_get_functions_count
- }
- 
- static const char *atmel_pmx_get_function_name(struct pinctrl_dev *pctldev,
--					       unsigned selector)
-+					       unsigned int selector)
- {
- 	return atmel_functions[selector];
- }
- 
- static int atmel_pmx_get_function_groups(struct pinctrl_dev *pctldev,
--					 unsigned selector,
-+					 unsigned int selector,
- 					 const char * const **groups,
- 					 unsigned * const num_groups)
- {
-@@ -698,11 +701,11 @@ static int atmel_pmx_get_function_groups
- }
- 
- static int atmel_pmx_set_mux(struct pinctrl_dev *pctldev,
--			     unsigned function,
--			     unsigned group)
-+			     unsigned int function,
-+			     unsigned int group)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
--	unsigned pin;
-+	unsigned int pin;
- 	u32 conf;
- 
- 	dev_dbg(pctldev->dev, "enable function %s group %s\n",
-@@ -726,13 +729,13 @@ static const struct pinmux_ops atmel_pmx
- };
- 
- static int atmel_conf_pin_config_group_get(struct pinctrl_dev *pctldev,
--					   unsigned group,
-+					   unsigned int group,
- 					   unsigned long *config)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
--	unsigned param = pinconf_to_config_param(*config), arg = 0;
-+	unsigned int param = pinconf_to_config_param(*config), arg = 0;
- 	struct atmel_group *grp = atmel_pioctrl->groups + group;
--	unsigned pin_id = grp->pin;
-+	unsigned int pin_id = grp->pin;
- 	u32 res;
- 
- 	res = atmel_pin_config_read(pctldev, pin_id);
-@@ -786,21 +789,21 @@ static int atmel_conf_pin_config_group_g
- }
- 
- static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
--					   unsigned group,
-+					   unsigned int group,
- 					   unsigned long *configs,
--					   unsigned num_configs)
-+					   unsigned int num_configs)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
- 	struct atmel_group *grp = atmel_pioctrl->groups + group;
--	unsigned bank, pin, pin_id = grp->pin;
-+	unsigned int bank, pin, pin_id = grp->pin;
- 	u32 mask, conf = 0;
- 	int i;
- 
- 	conf = atmel_pin_config_read(pctldev, pin_id);
- 
- 	for (i = 0; i < num_configs; i++) {
--		unsigned param = pinconf_to_config_param(configs[i]);
--		unsigned arg = pinconf_to_config_argument(configs[i]);
-+		unsigned int param = pinconf_to_config_param(configs[i]);
-+		unsigned int arg = pinconf_to_config_argument(configs[i]);
- 
- 		dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n",
- 			__func__, pin_id, configs[i]);
-@@ -900,7 +903,8 @@ static int atmel_conf_pin_config_group_s
- }
- 
- static void atmel_conf_pin_config_dbg_show(struct pinctrl_dev *pctldev,
--					   struct seq_file *s, unsigned pin_id)
-+					   struct seq_file *s,
-+					   unsigned int pin_id)
- {
- 	struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
- 	u32 conf;
-@@ -1108,8 +1112,8 @@ static int atmel_pinctrl_probe(struct pl
- 		return -ENOMEM;
- 	for (i = 0 ; i < atmel_pioctrl->npins; i++) {
- 		struct atmel_group *group = atmel_pioctrl->groups + i;
--		unsigned bank = ATMEL_PIO_BANK(i);
--		unsigned line = ATMEL_PIO_LINE(i);
-+		unsigned int bank = ATMEL_PIO_BANK(i);
-+		unsigned int line = ATMEL_PIO_LINE(i);
- 
- 		atmel_pioctrl->pins[i] = devm_kzalloc(dev,
- 				sizeof(**atmel_pioctrl->pins), GFP_KERNEL);
diff --git a/target/linux/at91/patches-5.10/148-net-macb-Add-default-usrio-config-to-default-gem-con.patch b/target/linux/at91/patches-5.10/148-net-macb-Add-default-usrio-config-to-default-gem-con.patch
deleted file mode 100644
index ee09fe34ffb3..000000000000
--- a/target/linux/at91/patches-5.10/148-net-macb-Add-default-usrio-config-to-default-gem-con.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 096f58e564aed56936ef6de42a44c3101e9b8ed1 Mon Sep 17 00:00:00 2001
-From: Atish Patra <atish.patra@wdc.com>
-Date: Wed, 3 Mar 2021 11:55:49 -0800
-Subject: [PATCH 148/247] net: macb: Add default usrio config to default gem
- config
-
-There is no usrio config defined for default gem config leading to
-a kernel panic devices that don't define a data. This issue can be
-reprdouced with microchip polar fire soc where compatible string
-is defined as "cdns,macb".
-
-Fixes: edac63861db7 ("add userio bits as platform configuration")
-
-Signed-off-by: Atish Patra <atish.patra@wdc.com>
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/cadence/macb_main.c | 15 ++++++++-------
- 1 file changed, 8 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/cadence/macb_main.c
-+++ b/drivers/net/ethernet/cadence/macb_main.c
-@@ -3865,6 +3865,13 @@ static int macb_init(struct platform_dev
- 	return 0;
- }
- 
-+static const struct macb_usrio_config macb_default_usrio = {
-+	.mii = MACB_BIT(MII),
-+	.rmii = MACB_BIT(RMII),
-+	.rgmii = GEM_BIT(RGMII),
-+	.refclk = MACB_BIT(CLKEN),
-+};
-+
- #if defined(CONFIG_OF)
- /* 1518 rounded up */
- #define AT91ETHER_MAX_RBUFF_SZ	0x600
-@@ -4380,13 +4387,6 @@ static int fu540_c000_init(struct platfo
- 	return macb_init(pdev);
- }
- 
--static const struct macb_usrio_config macb_default_usrio = {
--	.mii = MACB_BIT(MII),
--	.rmii = MACB_BIT(RMII),
--	.rgmii = GEM_BIT(RGMII),
--	.refclk = MACB_BIT(CLKEN),
--};
--
- static const struct macb_usrio_config sama7g5_usrio = {
- 	.mii = 0,
- 	.rmii = 1,
-@@ -4535,6 +4535,7 @@ static const struct macb_config default_
- 	.dma_burst_length = 16,
- 	.clk_init = macb_clk_init,
- 	.init = macb_init,
-+	.usrio = &macb_default_usrio,
- 	.jumbo_max_len = 10240,
- };
- 
diff --git a/target/linux/at91/patches-5.10/149-ARM-at91-pm-Move-prototypes-to-mutually-included-hea.patch b/target/linux/at91/patches-5.10/149-ARM-at91-pm-Move-prototypes-to-mutually-included-hea.patch
deleted file mode 100644
index cc7f6583aa82..000000000000
--- a/target/linux/at91/patches-5.10/149-ARM-at91-pm-Move-prototypes-to-mutually-included-hea.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From 746aba88c64e409cbc3757a5f81fad5b5c74bbcc Mon Sep 17 00:00:00 2001
-From: Lee Jones <lee.jones@linaro.org>
-Date: Wed, 3 Mar 2021 12:41:49 +0000
-Subject: [PATCH 149/247] ARM: at91: pm: Move prototypes to mutually included
- header
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Both the caller and the supplier's source file should have access to
-the include file containing the prototypes.
-
-Fixes the following W=1 kernel build warning(s):
-
- drivers/pinctrl/pinctrl-at91.c:1637:6: warning: no previous prototype for ‘at91_pinctrl_gpio_suspend’ [-Wmissing-prototypes]
- 1637 | void at91_pinctrl_gpio_suspend(void)
- | ^~~~~~~~~~~~~~~~~~~~~~~~~
- drivers/pinctrl/pinctrl-at91.c:1661:6: warning: no previous prototype for ‘at91_pinctrl_gpio_resume’ [-Wmissing-prototypes]
- 1661 | void at91_pinctrl_gpio_resume(void)
- | ^~~~~~~~~~~~~~~~~~~~~~~~
-
-Cc: Russell King <linux@armlinux.org.uk>
-Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
-Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
-Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Acked-by: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-Link: https://lore.kernel.org/r/20210303124149.3149511-1-lee.jones@linaro.org
----
- arch/arm/mach-at91/pm.c        | 19 ++++++++-----------
- drivers/pinctrl/pinctrl-at91.c |  2 ++
- include/soc/at91/pm.h          | 16 ++++++++++++++++
- 3 files changed, 26 insertions(+), 11 deletions(-)
- create mode 100644 include/soc/at91/pm.h
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -17,6 +17,8 @@
- #include <linux/clk/at91_pmc.h>
- #include <linux/platform_data/atmel.h>
- 
-+#include <soc/at91/pm.h>
-+
- #include <asm/cacheflush.h>
- #include <asm/fncpy.h>
- #include <asm/system_misc.h>
-@@ -25,17 +27,6 @@
- #include "generic.h"
- #include "pm.h"
- 
--/*
-- * FIXME: this is needed to communicate between the pinctrl driver and
-- * the PM implementation in the machine. Possibly part of the PM
-- * implementation should be moved down into the pinctrl driver and get
-- * called as part of the generic suspend/resume path.
-- */
--#ifdef CONFIG_PINCTRL_AT91
--extern void at91_pinctrl_gpio_suspend(void);
--extern void at91_pinctrl_gpio_resume(void);
--#endif
--
- struct at91_soc_pm {
- 	int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
- 	int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
-@@ -326,6 +317,12 @@ static void at91_pm_suspend(suspend_stat
- static int at91_pm_enter(suspend_state_t state)
- {
- #ifdef CONFIG_PINCTRL_AT91
-+	/*
-+	 * FIXME: this is needed to communicate between the pinctrl driver and
-+	 * the PM implementation in the machine. Possibly part of the PM
-+	 * implementation should be moved down into the pinctrl driver and get
-+	 * called as part of the generic suspend/resume path.
-+	 */
- 	at91_pinctrl_gpio_suspend();
- #endif
- 
---- a/drivers/pinctrl/pinctrl-at91.c
-+++ b/drivers/pinctrl/pinctrl-at91.c
-@@ -23,6 +23,8 @@
- /* Since we request GPIOs from ourself */
- #include <linux/pinctrl/consumer.h>
- 
-+#include <soc/at91/pm.h>
-+
- #include "pinctrl-at91.h"
- #include "core.h"
- 
---- /dev/null
-+++ b/include/soc/at91/pm.h
-@@ -0,0 +1,16 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/*
-+ * Atmel Power Management
-+ *
-+ * Copyright (C) 2020 Atmel
-+ *
-+ * Author: Lee Jones <lee.jones@linaro.org>
-+ */
-+
-+#ifndef __SOC_ATMEL_PM_H
-+#define __SOC_ATMEL_PM_H
-+
-+void at91_pinctrl_gpio_suspend(void);
-+void at91_pinctrl_gpio_resume(void);
-+
-+#endif /* __SOC_ATMEL_PM_H */
diff --git a/target/linux/at91/patches-5.10/150-ASoC-mchp-i2s-mcc-Add-compatible-for-SAMA7G5.patch b/target/linux/at91/patches-5.10/150-ASoC-mchp-i2s-mcc-Add-compatible-for-SAMA7G5.patch
deleted file mode 100644
index 174d0b3ced27..000000000000
--- a/target/linux/at91/patches-5.10/150-ASoC-mchp-i2s-mcc-Add-compatible-for-SAMA7G5.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From d6493e6f1c42f7ad350ea25e11f0e71fc32e6116 Mon Sep 17 00:00:00 2001
-From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Date: Mon, 1 Mar 2021 19:09:00 +0200
-Subject: [PATCH 150/247] ASoC: mchp-i2s-mcc: Add compatible for SAMA7G5
-
-Microchip's new SAMA7G5 includes an updated I2S-MCC compatible with the
-previous version found on SAM9X60. The new controller includes 8 (4 * 2)
-input and output data pins for up to 8 channels for I2S and Left-Justified
-formats.
-
-Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Link: https://lore.kernel.org/r/20210301170905.835091-3-codrin.ciubotariu@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/atmel/Kconfig        | 3 +++
- sound/soc/atmel/mchp-i2s-mcc.c | 3 +++
- 2 files changed, 6 insertions(+)
-
---- a/sound/soc/atmel/Kconfig
-+++ b/sound/soc/atmel/Kconfig
-@@ -126,10 +126,13 @@ config SND_MCHP_SOC_I2S_MCC
- 	  Say Y or M if you want to add support for I2S Multi-Channel ASoC
- 	  driver on the following Microchip platforms:
- 	  - sam9x60
-+	  - sama7g5
- 
- 	  The I2SMCC complies with the Inter-IC Sound (I2S) bus specification
- 	  and supports a Time Division Multiplexed (TDM) interface with
- 	  external multi-channel audio codecs.
-+	  Starting with sama7g5, I2S and Left-Justified multi-channel is
-+	  supported by using multiple data pins, output and input, without TDM.
- 
- config SND_MCHP_SOC_SPDIFTX
- 	tristate "Microchip ASoC driver for boards using S/PDIF TX"
---- a/sound/soc/atmel/mchp-i2s-mcc.c
-+++ b/sound/soc/atmel/mchp-i2s-mcc.c
-@@ -873,6 +873,9 @@ static const struct of_device_id mchp_i2
- 	{
- 		.compatible = "microchip,sam9x60-i2smcc",
- 	},
-+	{
-+		.compatible = "microchip,sama7g5-i2smcc",
-+	},
- 	{ /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, mchp_i2s_mcc_dt_ids);
diff --git a/target/linux/at91/patches-5.10/151-ASoC-mchp-i2s-mcc-Add-multi-channel-support-for-I2S-.patch b/target/linux/at91/patches-5.10/151-ASoC-mchp-i2s-mcc-Add-multi-channel-support-for-I2S-.patch
deleted file mode 100644
index 5047e04d5b9b..000000000000
--- a/target/linux/at91/patches-5.10/151-ASoC-mchp-i2s-mcc-Add-multi-channel-support-for-I2S-.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From 5bef4e8125d09443b5486971d5550ed285cde4b1 Mon Sep 17 00:00:00 2001
-From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Date: Mon, 1 Mar 2021 19:09:01 +0200
-Subject: [PATCH 151/247] ASoC: mchp-i2s-mcc: Add multi-channel support for I2S
- and LEFT_J formats
-
-The latest I2S-MCC available in SAMA7G5 supports multi-channel for I2S and
-Left-Justified formats. For this, the new version uses 8 (4 * 2) input and
-output pins, with each pin being responsible for 2 channels. This sums up
-to a total of 8 channels for synchronous capture and playback.
-
-Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Link: https://lore.kernel.org/r/20210301170905.835091-4-codrin.ciubotariu@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/atmel/mchp-i2s-mcc.c | 38 ++++++++++++++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
---- a/sound/soc/atmel/mchp-i2s-mcc.c
-+++ b/sound/soc/atmel/mchp-i2s-mcc.c
-@@ -16,6 +16,7 @@
- #include <linux/clk.h>
- #include <linux/mfd/syscon.h>
- #include <linux/lcm.h>
-+#include <linux/of_device.h>
- 
- #include <sound/core.h>
- #include <sound/pcm.h>
-@@ -225,6 +226,10 @@ static const struct regmap_config mchp_i
- 	.max_register = MCHP_I2SMCC_VERSION,
- };
- 
-+struct mchp_i2s_mcc_soc_data {
-+	unsigned int	data_pin_pair_num;
-+};
-+
- struct mchp_i2s_mcc_dev {
- 	struct wait_queue_head			wq_txrdy;
- 	struct wait_queue_head			wq_rxrdy;
-@@ -232,6 +237,7 @@ struct mchp_i2s_mcc_dev {
- 	struct regmap				*regmap;
- 	struct clk				*pclk;
- 	struct clk				*gclk;
-+	const struct mchp_i2s_mcc_soc_data	*soc;
- 	struct snd_dmaengine_dai_dma_data	playback;
- 	struct snd_dmaengine_dai_dma_data	capture;
- 	unsigned int				fmt;
-@@ -549,6 +555,17 @@ static int mchp_i2s_mcc_hw_params(struct
- 	}
- 
- 	if (dev->fmt & (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_LEFT_J)) {
-+		/* for I2S and LEFT_J one pin is needed for every 2 channels */
-+		if (channels > dev->soc->data_pin_pair_num * 2) {
-+			dev_err(dev->dev,
-+				"unsupported number of audio channels: %d\n",
-+				channels);
-+			return -EINVAL;
-+		}
-+
-+		/* enable for interleaved format */
-+		mrb |= MCHP_I2SMCC_MRB_CRAMODE_REGULAR;
-+
- 		switch (channels) {
- 		case 1:
- 			if (is_playback)
-@@ -558,6 +575,12 @@ static int mchp_i2s_mcc_hw_params(struct
- 			break;
- 		case 2:
- 			break;
-+		case 4:
-+			mra |= MCHP_I2SMCC_MRA_WIRECFG_I2S_2_TDM_1;
-+			break;
-+		case 8:
-+			mra |= MCHP_I2SMCC_MRA_WIRECFG_I2S_4_TDM_2;
-+			break;
- 		default:
- 			dev_err(dev->dev, "unsupported number of audio channels\n");
- 			return -EINVAL;
-@@ -869,12 +892,22 @@ static const struct snd_soc_component_dr
- };
- 
- #ifdef CONFIG_OF
-+static struct mchp_i2s_mcc_soc_data mchp_i2s_mcc_sam9x60 = {
-+	.data_pin_pair_num = 1,
-+};
-+
-+static struct mchp_i2s_mcc_soc_data mchp_i2s_mcc_sama7g5 = {
-+	.data_pin_pair_num = 4,
-+};
-+
- static const struct of_device_id mchp_i2s_mcc_dt_ids[] = {
- 	{
- 		.compatible = "microchip,sam9x60-i2smcc",
-+		.data = &mchp_i2s_mcc_sam9x60,
- 	},
- 	{
- 		.compatible = "microchip,sama7g5-i2smcc",
-+		.data = &mchp_i2s_mcc_sama7g5,
- 	},
- 	{ /* sentinel */ }
- };
-@@ -932,6 +965,11 @@ static int mchp_i2s_mcc_probe(struct pla
- 		dev->gclk = NULL;
- 	}
- 
-+	dev->soc = of_device_get_match_data(&pdev->dev);
-+	if (!dev->soc) {
-+		dev_err(&pdev->dev, "failed to get soc data\n");
-+		return -ENODEV;
-+	}
- 	dev->dev = &pdev->dev;
- 	dev->regmap = regmap;
- 	platform_set_drvdata(pdev, dev);
diff --git a/target/linux/at91/patches-5.10/152-ASoC-mchp-i2s-mcc-Add-support-to-select-TDM-pins.patch b/target/linux/at91/patches-5.10/152-ASoC-mchp-i2s-mcc-Add-support-to-select-TDM-pins.patch
deleted file mode 100644
index 6d5a15d36bdf..000000000000
--- a/target/linux/at91/patches-5.10/152-ASoC-mchp-i2s-mcc-Add-support-to-select-TDM-pins.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From 2bbdc5b38603384996271a8817b0578a2360af2f Mon Sep 17 00:00:00 2001
-From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Date: Mon, 1 Mar 2021 19:09:03 +0200
-Subject: [PATCH 152/247] ASoC: mchp-i2s-mcc: Add support to select TDM pins
-
-SAMA7G5's I2S-MCC has 4 pairs of DIN/DOUT pins. Since TDM only uses a
-single pair of pins for synchronous capture and playback, the controller
-needs to be told which of the pair is connected. This can be mentioned
-using the "microchip,tdm-data-pair" property from DT. The property is
-optional, useful only if TDM is used. If it's missing, DIN/DOUT 0 pins
-will be used by default.
-
-Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Link: https://lore.kernel.org/r/20210301170905.835091-6-codrin.ciubotariu@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/atmel/mchp-i2s-mcc.c | 52 +++++++++++++++++++++++++++++++---
- 1 file changed, 48 insertions(+), 4 deletions(-)
-
---- a/sound/soc/atmel/mchp-i2s-mcc.c
-+++ b/sound/soc/atmel/mchp-i2s-mcc.c
-@@ -100,6 +100,8 @@
- #define MCHP_I2SMCC_MRA_DATALENGTH_8_BITS_COMPACT	(7 << 1)
- 
- #define MCHP_I2SMCC_MRA_WIRECFG_MASK		GENMASK(5, 4)
-+#define MCHP_I2SMCC_MRA_WIRECFG_TDM(pin)	(((pin) << 4) & \
-+						 MCHP_I2SMCC_MRA_WIRECFG_MASK)
- #define MCHP_I2SMCC_MRA_WIRECFG_I2S_1_TDM_0	(0 << 4)
- #define MCHP_I2SMCC_MRA_WIRECFG_I2S_2_TDM_1	(1 << 4)
- #define MCHP_I2SMCC_MRA_WIRECFG_I2S_4_TDM_2	(2 << 4)
-@@ -245,6 +247,7 @@ struct mchp_i2s_mcc_dev {
- 	unsigned int				frame_length;
- 	int					tdm_slots;
- 	int					channels;
-+	u8					tdm_data_pair;
- 	unsigned int				gclk_use:1;
- 	unsigned int				gclk_running:1;
- 	unsigned int				tx_rdy:1;
-@@ -589,6 +592,8 @@ static int mchp_i2s_mcc_hw_params(struct
- 		if (!frame_length)
- 			frame_length = 2 * params_physical_width(params);
- 	} else if (dev->fmt & SND_SOC_DAIFMT_DSP_A) {
-+		mra |= MCHP_I2SMCC_MRA_WIRECFG_TDM(dev->tdm_data_pair);
-+
- 		if (dev->tdm_slots) {
- 			if (channels % 2 && channels * 2 <= dev->tdm_slots) {
- 				/*
-@@ -914,6 +919,45 @@ static const struct of_device_id mchp_i2
- MODULE_DEVICE_TABLE(of, mchp_i2s_mcc_dt_ids);
- #endif
- 
-+static int mchp_i2s_mcc_soc_data_parse(struct platform_device *pdev,
-+				       struct mchp_i2s_mcc_dev *dev)
-+{
-+	int err;
-+
-+	if (!dev->soc) {
-+		dev_err(&pdev->dev, "failed to get soc data\n");
-+		return -ENODEV;
-+	}
-+
-+	if (dev->soc->data_pin_pair_num == 1)
-+		return 0;
-+
-+	err = of_property_read_u8(pdev->dev.of_node, "microchip,tdm-data-pair",
-+				  &dev->tdm_data_pair);
-+	if (err < 0 && err != -EINVAL) {
-+		dev_err(&pdev->dev,
-+			"bad property data for 'microchip,tdm-data-pair': %d",
-+			err);
-+		return err;
-+	}
-+	if (err == -EINVAL) {
-+		dev_info(&pdev->dev,
-+			 "'microchip,tdm-data-pair' not found; assuming DIN/DOUT 0 for TDM\n");
-+		dev->tdm_data_pair = 0;
-+	} else {
-+		if (dev->tdm_data_pair > dev->soc->data_pin_pair_num - 1) {
-+			dev_err(&pdev->dev,
-+				"invalid value for 'microchip,tdm-data-pair': %d\n",
-+				dev->tdm_data_pair);
-+			return -EINVAL;
-+		}
-+		dev_dbg(&pdev->dev, "TMD format on DIN/DOUT %d pins\n",
-+			dev->tdm_data_pair);
-+	}
-+
-+	return 0;
-+}
-+
- static int mchp_i2s_mcc_probe(struct platform_device *pdev)
- {
- 	struct mchp_i2s_mcc_dev *dev;
-@@ -966,10 +1010,10 @@ static int mchp_i2s_mcc_probe(struct pla
- 	}
- 
- 	dev->soc = of_device_get_match_data(&pdev->dev);
--	if (!dev->soc) {
--		dev_err(&pdev->dev, "failed to get soc data\n");
--		return -ENODEV;
--	}
-+	err = mchp_i2s_mcc_soc_data_parse(pdev, dev);
-+	if (err < 0)
-+		return err;
-+
- 	dev->dev = &pdev->dev;
- 	dev->regmap = regmap;
- 	platform_set_drvdata(pdev, dev);
diff --git a/target/linux/at91/patches-5.10/153-ASoC-mchp-i2s-mcc-Add-FIFOs-support.patch b/target/linux/at91/patches-5.10/153-ASoC-mchp-i2s-mcc-Add-FIFOs-support.patch
deleted file mode 100644
index 24e0e4de4cb5..000000000000
--- a/target/linux/at91/patches-5.10/153-ASoC-mchp-i2s-mcc-Add-FIFOs-support.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-From 36bb4f0ab8e7ef69cc11d4d888aa898223b0e901 Mon Sep 17 00:00:00 2001
-From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Date: Mon, 1 Mar 2021 19:09:04 +0200
-Subject: [PATCH 153/247] ASoC: mchp-i2s-mcc: Add FIFOs support
-
-I2S-MCC found on SAMA7G5 includes 2 FIFOs (capture and playback). When
-FIFOs are enabled, bits I2SMCC_ISRA.TXLRDYx and I2SMCC_ISRA.TXRRDYx must
-not be used. Bits I2SMCC_ISRB.TXFFRDY and I2SMCC_ISRB.RXFFRDY must be used
-instead.
-
-Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Link: https://lore.kernel.org/r/20210301170905.835091-7-codrin.ciubotariu@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/atmel/mchp-i2s-mcc.c | 76 +++++++++++++++++++++++++---------
- 1 file changed, 56 insertions(+), 20 deletions(-)
-
---- a/sound/soc/atmel/mchp-i2s-mcc.c
-+++ b/sound/soc/atmel/mchp-i2s-mcc.c
-@@ -176,7 +176,7 @@
-  */
- #define MCHP_I2SMCC_MRB_CRAMODE_REGULAR		(1 << 0)
- 
--#define MCHP_I2SMCC_MRB_FIFOEN			BIT(1)
-+#define MCHP_I2SMCC_MRB_FIFOEN			BIT(4)
- 
- #define MCHP_I2SMCC_MRB_DMACHUNK_MASK		GENMASK(9, 8)
- #define MCHP_I2SMCC_MRB_DMACHUNK(no_words) \
-@@ -230,6 +230,7 @@ static const struct regmap_config mchp_i
- 
- struct mchp_i2s_mcc_soc_data {
- 	unsigned int	data_pin_pair_num;
-+	bool		has_fifo;
- };
- 
- struct mchp_i2s_mcc_dev {
-@@ -257,7 +258,7 @@ struct mchp_i2s_mcc_dev {
- static irqreturn_t mchp_i2s_mcc_interrupt(int irq, void *dev_id)
- {
- 	struct mchp_i2s_mcc_dev *dev = dev_id;
--	u32 sra, imra, srb, imrb, pendinga, pendingb, idra = 0;
-+	u32 sra, imra, srb, imrb, pendinga, pendingb, idra = 0, idrb = 0;
- 	irqreturn_t ret = IRQ_NONE;
- 
- 	regmap_read(dev->regmap, MCHP_I2SMCC_IMRA, &imra);
-@@ -275,24 +276,36 @@ static irqreturn_t mchp_i2s_mcc_interrup
- 	 * Tx/Rx ready interrupts are enabled when stopping only, to assure
- 	 * availability and to disable clocks if necessary
- 	 */
--	idra |= pendinga & (MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels) |
--			    MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels));
--	if (idra)
-+	if (dev->soc->has_fifo) {
-+		idrb |= pendingb & (MCHP_I2SMCC_INT_TXFFRDY |
-+				    MCHP_I2SMCC_INT_RXFFRDY);
-+	} else {
-+		idra |= pendinga & (MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels) |
-+				    MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels));
-+	}
-+	if (idra || idrb)
- 		ret = IRQ_HANDLED;
- 
--	if ((imra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)) &&
--	    (imra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)) ==
--	    (idra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels))) {
-+	if ((!dev->soc->has_fifo &&
-+	     (imra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)) &&
-+	     (imra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)) ==
-+	     (idra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels))) ||
-+	    (dev->soc->has_fifo && imrb & MCHP_I2SMCC_INT_TXFFRDY)) {
- 		dev->tx_rdy = 1;
- 		wake_up_interruptible(&dev->wq_txrdy);
- 	}
--	if ((imra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)) &&
--	    (imra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)) ==
--	    (idra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels))) {
-+	if ((!dev->soc->has_fifo &&
-+	     (imra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)) &&
-+	     (imra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)) ==
-+	     (idra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels))) ||
-+	    (dev->soc->has_fifo && imrb & MCHP_I2SMCC_INT_RXFFRDY)) {
- 		dev->rx_rdy = 1;
- 		wake_up_interruptible(&dev->wq_rxrdy);
- 	}
--	regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, idra);
-+	if (dev->soc->has_fifo)
-+		regmap_write(dev->regmap, MCHP_I2SMCC_IDRB, idrb);
-+	else
-+		regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, idra);
- 
- 	return ret;
- }
-@@ -664,6 +677,10 @@ static int mchp_i2s_mcc_hw_params(struct
- 		}
- 	}
- 
-+	/* enable FIFO if available */
-+	if (dev->soc->has_fifo)
-+		mrb |= MCHP_I2SMCC_MRB_FIFOEN;
-+
- 	/*
- 	 * If we are already running, the wanted setup must be
- 	 * the same with the one that's currently ongoing
-@@ -726,8 +743,13 @@ static int mchp_i2s_mcc_hw_free(struct s
- 		if (err == 0) {
- 			dev_warn_once(dev->dev,
- 				      "Timeout waiting for Tx ready\n");
--			regmap_write(dev->regmap, MCHP_I2SMCC_IDRA,
--				     MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels));
-+			if (dev->soc->has_fifo)
-+				regmap_write(dev->regmap, MCHP_I2SMCC_IDRB,
-+					     MCHP_I2SMCC_INT_TXFFRDY);
-+			else
-+				regmap_write(dev->regmap, MCHP_I2SMCC_IDRA,
-+					     MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels));
-+
- 			dev->tx_rdy = 1;
- 		}
- 	} else {
-@@ -737,8 +759,12 @@ static int mchp_i2s_mcc_hw_free(struct s
- 		if (err == 0) {
- 			dev_warn_once(dev->dev,
- 				      "Timeout waiting for Rx ready\n");
--			regmap_write(dev->regmap, MCHP_I2SMCC_IDRA,
--				     MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels));
-+			if (dev->soc->has_fifo)
-+				regmap_write(dev->regmap, MCHP_I2SMCC_IDRB,
-+					     MCHP_I2SMCC_INT_RXFFRDY);
-+			else
-+				regmap_write(dev->regmap, MCHP_I2SMCC_IDRA,
-+					     MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels));
- 			dev->rx_rdy = 1;
- 		}
- 	}
-@@ -765,7 +791,7 @@ static int mchp_i2s_mcc_trigger(struct s
- 	struct mchp_i2s_mcc_dev *dev = snd_soc_dai_get_drvdata(dai);
- 	bool is_playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
- 	u32 cr = 0;
--	u32 iera = 0;
-+	u32 iera = 0, ierb = 0;
- 	u32 sr;
- 	int err;
- 
-@@ -789,7 +815,10 @@ static int mchp_i2s_mcc_trigger(struct s
- 			 * Enable Tx Ready interrupts on all channels
- 			 * to assure all data is sent
- 			 */
--			iera = MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels);
-+			if (dev->soc->has_fifo)
-+				ierb = MCHP_I2SMCC_INT_TXFFRDY;
-+			else
-+				iera = MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels);
- 		} else if (!is_playback && (sr & MCHP_I2SMCC_SR_RXEN)) {
- 			cr = MCHP_I2SMCC_CR_RXDIS;
- 			dev->rx_rdy = 0;
-@@ -797,7 +826,10 @@ static int mchp_i2s_mcc_trigger(struct s
- 			 * Enable Rx Ready interrupts on all channels
- 			 * to assure all data is received
- 			 */
--			iera = MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels);
-+			if (dev->soc->has_fifo)
-+				ierb = MCHP_I2SMCC_INT_RXFFRDY;
-+			else
-+				iera = MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels);
- 		}
- 		break;
- 	default:
-@@ -815,7 +847,10 @@ static int mchp_i2s_mcc_trigger(struct s
- 		}
- 	}
- 
--	regmap_write(dev->regmap, MCHP_I2SMCC_IERA, iera);
-+	if (dev->soc->has_fifo)
-+		regmap_write(dev->regmap, MCHP_I2SMCC_IERB, ierb);
-+	else
-+		regmap_write(dev->regmap, MCHP_I2SMCC_IERA, iera);
- 	regmap_write(dev->regmap, MCHP_I2SMCC_CR, cr);
- 
- 	return 0;
-@@ -903,6 +938,7 @@ static struct mchp_i2s_mcc_soc_data mchp
- 
- static struct mchp_i2s_mcc_soc_data mchp_i2s_mcc_sama7g5 = {
- 	.data_pin_pair_num = 4,
-+	.has_fifo = true,
- };
- 
- static const struct of_device_id mchp_i2s_mcc_dt_ids[] = {
diff --git a/target/linux/at91/patches-5.10/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch b/target/linux/at91/patches-5.10/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch
deleted file mode 100644
index c61e6b1c9052..000000000000
--- a/target/linux/at91/patches-5.10/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From dc07cbae6e96843d26e8f10b16e901620bd16462 Mon Sep 17 00:00:00 2001
-From: Tudor Ambarus <tudor.ambarus@microchip.com>
-Date: Fri, 9 Apr 2021 11:25:22 +0300
-Subject: [PATCH 154/247] pinctrl: at91-pio4: Fix slew rate disablement
-
-The slew rate was enabled by default for each configuration of the
-pin. In case the pin had more than one configuration, even if
-we set the slew rate as disabled in the device tree, the next pin
-configuration would set again the slew rate enabled by default,
-overwriting the slew rate disablement.
-Instead of enabling the slew rate by default for each pin configuration,
-enable the slew rate by default just once per pin, regardless of the
-number of configurations. This way the slew rate disablement will also
-work for cases where pins have multiple configurations.
-
-Fixes: c709135e576b ("pinctrl: at91-pio4: add support for slew-rate")
-Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
-Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
-Link: https://lore.kernel.org/r/20210409082522.625168-1-tudor.ambarus@microchip.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-at91-pio4.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-at91-pio4.c
-+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
-@@ -801,6 +801,10 @@ static int atmel_conf_pin_config_group_s
- 
- 	conf = atmel_pin_config_read(pctldev, pin_id);
- 
-+	/* Keep slew rate enabled by default. */
-+	if (atmel_pioctrl->slew_rate_support)
-+		conf |= ATMEL_PIO_SR_MASK;
-+
- 	for (i = 0; i < num_configs; i++) {
- 		unsigned int param = pinconf_to_config_param(configs[i]);
- 		unsigned int arg = pinconf_to_config_argument(configs[i]);
-@@ -808,10 +812,6 @@ static int atmel_conf_pin_config_group_s
- 		dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n",
- 			__func__, pin_id, configs[i]);
- 
--		/* Keep slew rate enabled by default. */
--		if (atmel_pioctrl->slew_rate_support)
--			conf |= ATMEL_PIO_SR_MASK;
--
- 		switch (param) {
- 		case PIN_CONFIG_BIAS_DISABLE:
- 			conf &= (~ATMEL_PIO_PUEN_MASK);
diff --git a/target/linux/at91/patches-5.10/155-media-atmel-properly-get-pm_runtime.patch b/target/linux/at91/patches-5.10/155-media-atmel-properly-get-pm_runtime.patch
deleted file mode 100644
index 58f90db46daf..000000000000
--- a/target/linux/at91/patches-5.10/155-media-atmel-properly-get-pm_runtime.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From c7660cc977621c4a14d870d523918df067f0db39 Mon Sep 17 00:00:00 2001
-From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-Date: Fri, 23 Apr 2021 16:47:42 +0200
-Subject: [PATCH 155/247] media: atmel: properly get pm_runtime
-
-There are several issues in the way the atmel driver handles
-pm_runtime_get_sync():
-
-- it doesn't check return codes;
-- it doesn't properly decrement the usage_count on all places;
-- it starts streaming even if pm_runtime_get_sync() fails.
-- while it tries to get pm_runtime at the clock enable logic,
-  it doesn't check if the operation was suceeded.
-
-Replace all occurrences of it to use the new kAPI:
-pm_runtime_resume_and_get(), which ensures that, if the
-return code is not negative, the usage_count was incremented.
-
-With that, add additional checks when this is called, in order
-to ensure that errors will be properly addressed.
-
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c | 30 ++++++++++++++-----
- drivers/media/platform/atmel/atmel-isi.c      | 19 +++++++++---
- 2 files changed, 38 insertions(+), 11 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct cl
- static int isc_clk_prepare(struct clk_hw *hw)
- {
- 	struct isc_clk *isc_clk = to_isc_clk(hw);
-+	int ret;
- 
--	if (isc_clk->id == ISC_ISPCK)
--		pm_runtime_get_sync(isc_clk->dev);
-+	if (isc_clk->id == ISC_ISPCK) {
-+		ret = pm_runtime_resume_and_get(isc_clk->dev);
-+		if (ret < 0)
-+			return ret;
-+	}
- 
- 	return isc_wait_clk_stable(hw);
- }
-@@ -353,9 +357,13 @@ static int isc_clk_is_enabled(struct clk
- {
- 	struct isc_clk *isc_clk = to_isc_clk(hw);
- 	u32 status;
-+	int ret;
- 
--	if (isc_clk->id == ISC_ISPCK)
--		pm_runtime_get_sync(isc_clk->dev);
-+	if (isc_clk->id == ISC_ISPCK) {
-+		ret = pm_runtime_resume_and_get(isc_clk->dev);
-+		if (ret < 0)
-+			return 0;
-+	}
- 
- 	regmap_read(isc_clk->regmap, ISC_CLKSR, &status);
- 
-@@ -807,7 +815,12 @@ static int isc_start_streaming(struct vb
- 		goto err_start_stream;
- 	}
- 
--	pm_runtime_get_sync(isc->dev);
-+	ret = pm_runtime_resume_and_get(isc->dev);
-+	if (ret < 0) {
-+		v4l2_err(&isc->v4l2_dev, "RPM resume failed in subdev %d\n",
-+			 ret);
-+		goto err_pm_get;
-+	}
- 
- 	ret = isc_configure(isc);
- 	if (unlikely(ret))
-@@ -838,7 +851,7 @@ static int isc_start_streaming(struct vb
- 
- err_configure:
- 	pm_runtime_put_sync(isc->dev);
--
-+err_pm_get:
- 	v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0);
- 
- err_start_stream:
-@@ -1809,6 +1822,7 @@ static void isc_awb_work(struct work_str
- 	u32 baysel;
- 	unsigned long flags;
- 	u32 min, max;
-+	int ret;
- 
- 	/* streaming is not active anymore */
- 	if (isc->stop)
-@@ -1831,7 +1845,9 @@ static void isc_awb_work(struct work_str
- 	ctrls->hist_id = hist_id;
- 	baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT;
- 
--	pm_runtime_get_sync(isc->dev);
-+	ret = pm_runtime_resume_and_get(isc->dev);
-+	if (ret < 0)
-+		return;
- 
- 	/*
- 	 * only update if we have all the required histograms and controls
---- a/drivers/media/platform/atmel/atmel-isi.c
-+++ b/drivers/media/platform/atmel/atmel-isi.c
-@@ -423,7 +423,9 @@ static int start_streaming(struct vb2_qu
- 	struct frame_buffer *buf, *node;
- 	int ret;
- 
--	pm_runtime_get_sync(isi->dev);
-+	ret = pm_runtime_resume_and_get(isi->dev);
-+	if (ret < 0)
-+		return ret;
- 
- 	/* Enable stream on the sub device */
- 	ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1);
-@@ -783,9 +785,10 @@ static int isi_enum_frameintervals(struc
- 	return 0;
- }
- 
--static void isi_camera_set_bus_param(struct atmel_isi *isi)
-+static int isi_camera_set_bus_param(struct atmel_isi *isi)
- {
- 	u32 cfg1 = 0;
-+	int ret;
- 
- 	/* set bus param for ISI */
- 	if (isi->pdata.hsync_act_low)
-@@ -802,12 +805,16 @@ static void isi_camera_set_bus_param(str
- 	cfg1 |= ISI_CFG1_THMASK_BEATS_16;
- 
- 	/* Enable PM and peripheral clock before operate isi registers */
--	pm_runtime_get_sync(isi->dev);
-+	ret = pm_runtime_resume_and_get(isi->dev);
-+	if (ret < 0)
-+		return ret;
- 
- 	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
- 	isi_writel(isi, ISI_CFG1, cfg1);
- 
- 	pm_runtime_put(isi->dev);
-+
-+	return 0;
- }
- 
- /* -----------------------------------------------------------------------*/
-@@ -1086,7 +1093,11 @@ static int isi_graph_notify_complete(str
- 		dev_err(isi->dev, "No supported mediabus format found\n");
- 		return ret;
- 	}
--	isi_camera_set_bus_param(isi);
-+	ret = isi_camera_set_bus_param(isi);
-+	if (ret) {
-+		dev_err(isi->dev, "Can't wake up device\n");
-+		return ret;
-+	}
- 
- 	ret = isi_set_default_fmt(isi);
- 	if (ret) {
diff --git a/target/linux/at91/patches-5.10/156-media-atmel-atmel-isc-Remove-redundant-assignment-to.patch b/target/linux/at91/patches-5.10/156-media-atmel-atmel-isc-Remove-redundant-assignment-to.patch
deleted file mode 100644
index f8bdcbef232d..000000000000
--- a/target/linux/at91/patches-5.10/156-media-atmel-atmel-isc-Remove-redundant-assignment-to.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From b074b4695004b793a9199716295cb76da6c41686 Mon Sep 17 00:00:00 2001
-From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
-Date: Mon, 17 May 2021 12:07:48 +0200
-Subject: [PATCH 156/247] media: atmel: atmel-isc: Remove redundant assignment
- to i
-
-Variable i is being assigned a value however the assignment is
-never read, so this redundant assignment can be removed.
-
-Clean up the following clang-analyzer warning:
-
-drivers/media/platform/atmel/atmel-isc-base.c:975:2: warning: Value
-stored to 'i' is never read [clang-analyzer-deadcode.DeadStores].
-
-Reported-by: Abaci Robot <abaci@linux.alibaba.com>
-Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -972,7 +972,6 @@ static int isc_enum_fmt_vid_cap(struct f
- 
- 	index -= ARRAY_SIZE(controller_formats);
- 
--	i = 0;
- 	supported_index = 0;
- 
- 	for (i = 0; i < ARRAY_SIZE(formats_list); i++) {
diff --git a/target/linux/at91/patches-5.10/157-media-atmel-atmel-isc-specialize-gamma-table-into-pr.patch b/target/linux/at91/patches-5.10/157-media-atmel-atmel-isc-specialize-gamma-table-into-pr.patch
deleted file mode 100644
index 6f2d5879c7f0..000000000000
--- a/target/linux/at91/patches-5.10/157-media-atmel-atmel-isc-specialize-gamma-table-into-pr.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-From c3f54d192dc7344c5216a3628b67c4bbccbf8c3c Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:56:59 +0200
-Subject: [PATCH 157/247] media: atmel: atmel-isc: specialize gamma table into
- product specific
-
-Separate the gamma table from the isc base file into the specific sama5d2
-product file.
-Add a pointer to the gamma table and entries count inside the platform
-driver specific struct.
-
-[hverkuil: made isc_sama5d2_gamma_table static]
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c | 47 ++-----------------
- drivers/media/platform/atmel/atmel-isc.h      | 11 +++--
- .../media/platform/atmel/atmel-sama5d2-isc.c  | 45 ++++++++++++++++++
- 3 files changed, 56 insertions(+), 47 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -176,48 +176,6 @@ struct isc_format formats_list[] = {
- 
- };
- 
--/* Gamma table with gamma 1/2.2 */
--const u32 isc_gamma_table[GAMMA_MAX + 1][GAMMA_ENTRIES] = {
--	/* 0 --> gamma 1/1.8 */
--	{      0x65,  0x66002F,  0x950025,  0xBB0020,  0xDB001D,  0xF8001A,
--	  0x1130018, 0x12B0017, 0x1420016, 0x1580014, 0x16D0013, 0x1810012,
--	  0x1940012, 0x1A60012, 0x1B80011, 0x1C90010, 0x1DA0010, 0x1EA000F,
--	  0x1FA000F, 0x209000F, 0x218000F, 0x227000E, 0x235000E, 0x243000E,
--	  0x251000E, 0x25F000D, 0x26C000D, 0x279000D, 0x286000D, 0x293000C,
--	  0x2A0000C, 0x2AC000C, 0x2B8000C, 0x2C4000C, 0x2D0000B, 0x2DC000B,
--	  0x2E7000B, 0x2F3000B, 0x2FE000B, 0x309000B, 0x314000B, 0x31F000A,
--	  0x32A000A, 0x334000B, 0x33F000A, 0x349000A, 0x354000A, 0x35E000A,
--	  0x368000A, 0x372000A, 0x37C000A, 0x386000A, 0x3900009, 0x399000A,
--	  0x3A30009, 0x3AD0009, 0x3B60009, 0x3BF000A, 0x3C90009, 0x3D20009,
--	  0x3DB0009, 0x3E40009, 0x3ED0009, 0x3F60009 },
--
--	/* 1 --> gamma 1/2 */
--	{      0x7F,  0x800034,  0xB50028,  0xDE0021, 0x100001E, 0x11E001B,
--	  0x1390019, 0x1520017, 0x16A0015, 0x1800014, 0x1940014, 0x1A80013,
--	  0x1BB0012, 0x1CD0011, 0x1DF0010, 0x1EF0010, 0x200000F, 0x20F000F,
--	  0x21F000E, 0x22D000F, 0x23C000E, 0x24A000E, 0x258000D, 0x265000D,
--	  0x273000C, 0x27F000D, 0x28C000C, 0x299000C, 0x2A5000C, 0x2B1000B,
--	  0x2BC000C, 0x2C8000B, 0x2D3000C, 0x2DF000B, 0x2EA000A, 0x2F5000A,
--	  0x2FF000B, 0x30A000A, 0x314000B, 0x31F000A, 0x329000A, 0x333000A,
--	  0x33D0009, 0x3470009, 0x350000A, 0x35A0009, 0x363000A, 0x36D0009,
--	  0x3760009, 0x37F0009, 0x3880009, 0x3910009, 0x39A0009, 0x3A30009,
--	  0x3AC0008, 0x3B40009, 0x3BD0008, 0x3C60008, 0x3CE0008, 0x3D60009,
--	  0x3DF0008, 0x3E70008, 0x3EF0008, 0x3F70008 },
--
--	/* 2 --> gamma 1/2.2 */
--	{      0x99,  0x9B0038,  0xD4002A,  0xFF0023, 0x122001F, 0x141001B,
--	  0x15D0019, 0x1760017, 0x18E0015, 0x1A30015, 0x1B80013, 0x1CC0012,
--	  0x1DE0011, 0x1F00010, 0x2010010, 0x2110010, 0x221000F, 0x230000F,
--	  0x23F000E, 0x24D000E, 0x25B000D, 0x269000C, 0x276000C, 0x283000C,
--	  0x28F000C, 0x29B000C, 0x2A7000C, 0x2B3000B, 0x2BF000B, 0x2CA000B,
--	  0x2D5000B, 0x2E0000A, 0x2EB000A, 0x2F5000A, 0x2FF000A, 0x30A000A,
--	  0x3140009, 0x31E0009, 0x327000A, 0x3310009, 0x33A0009, 0x3440009,
--	  0x34D0009, 0x3560009, 0x35F0009, 0x3680008, 0x3710008, 0x3790009,
--	  0x3820008, 0x38A0008, 0x3930008, 0x39B0008, 0x3A30008, 0x3AB0008,
--	  0x3B30008, 0x3BB0008, 0x3C30008, 0x3CB0007, 0x3D20008, 0x3DA0007,
--	  0x3E20007, 0x3E90007, 0x3F00008, 0x3F80007 },
--};
--
- #define ISC_IS_FORMAT_RAW(mbus_code) \
- 	(((mbus_code) & 0xf000) == 0x3000)
- 
-@@ -691,7 +649,7 @@ static void isc_set_pipeline(struct isc_
- 
- 	regmap_write(regmap, ISC_CFA_CFG, bay_cfg | ISC_CFA_CFG_EITPOL);
- 
--	gamma = &isc_gamma_table[ctrls->gamma_index][0];
-+	gamma = &isc->gamma_table[ctrls->gamma_index][0];
- 	regmap_bulk_write(regmap, ISC_GAM_BENTRY, gamma, GAMMA_ENTRIES);
- 	regmap_bulk_write(regmap, ISC_GAM_GENTRY, gamma, GAMMA_ENTRIES);
- 	regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES);
-@@ -2085,7 +2043,8 @@ static int isc_ctrl_init(struct isc_devi
- 
- 	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -1024, 1023, 1, 0);
- 	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256);
--	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAMMA, 0, GAMMA_MAX, 1, 2);
-+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAMMA, 0, isc->gamma_max, 1,
-+			  isc->gamma_max);
- 	isc->awb_ctrl = v4l2_ctrl_new_std(hdl, &isc_awb_ops,
- 					  V4L2_CID_AUTO_WHITE_BALANCE,
- 					  0, 1, 1, 1);
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -186,6 +186,10 @@ struct isc_ctrls {
-  *
-  * @current_subdev:	current subdevice: the sensor
-  * @subdev_entities:	list of subdevice entitites
-+ *
-+ * @gamma_table:	pointer to the table with gamma values, has
-+ *			gamma_max sets of GAMMA_ENTRIES entries each
-+ * @gamma_max:		maximum number of sets of inside the gamma_table
-  */
- struct isc_device {
- 	struct regmap		*regmap;
-@@ -244,16 +248,17 @@ struct isc_device {
- 		struct v4l2_ctrl	*gr_off_ctrl;
- 		struct v4l2_ctrl	*gb_off_ctrl;
- 	};
--};
- 
--#define GAMMA_MAX	2
- #define GAMMA_ENTRIES	64
-+	/* pointer to the defined gamma table */
-+	const u32	(*gamma_table)[GAMMA_ENTRIES];
-+	u32		gamma_max;
-+};
- 
- #define ATMEL_ISC_NAME "atmel-isc"
- 
- extern struct isc_format formats_list[];
- extern const struct isc_format controller_formats[];
--extern const u32 isc_gamma_table[GAMMA_MAX + 1][GAMMA_ENTRIES];
- extern const struct regmap_config isc_regmap_config;
- extern const struct v4l2_async_notifier_operations isc_async_ops;
- 
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -54,6 +54,48 @@
- 
- #define ISC_CLK_MAX_DIV		255
- 
-+/* Gamma table with gamma 1/2.2 */
-+static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
-+	/* 0 --> gamma 1/1.8 */
-+	{      0x65,  0x66002F,  0x950025,  0xBB0020,  0xDB001D,  0xF8001A,
-+	  0x1130018, 0x12B0017, 0x1420016, 0x1580014, 0x16D0013, 0x1810012,
-+	  0x1940012, 0x1A60012, 0x1B80011, 0x1C90010, 0x1DA0010, 0x1EA000F,
-+	  0x1FA000F, 0x209000F, 0x218000F, 0x227000E, 0x235000E, 0x243000E,
-+	  0x251000E, 0x25F000D, 0x26C000D, 0x279000D, 0x286000D, 0x293000C,
-+	  0x2A0000C, 0x2AC000C, 0x2B8000C, 0x2C4000C, 0x2D0000B, 0x2DC000B,
-+	  0x2E7000B, 0x2F3000B, 0x2FE000B, 0x309000B, 0x314000B, 0x31F000A,
-+	  0x32A000A, 0x334000B, 0x33F000A, 0x349000A, 0x354000A, 0x35E000A,
-+	  0x368000A, 0x372000A, 0x37C000A, 0x386000A, 0x3900009, 0x399000A,
-+	  0x3A30009, 0x3AD0009, 0x3B60009, 0x3BF000A, 0x3C90009, 0x3D20009,
-+	  0x3DB0009, 0x3E40009, 0x3ED0009, 0x3F60009 },
-+
-+	/* 1 --> gamma 1/2 */
-+	{      0x7F,  0x800034,  0xB50028,  0xDE0021, 0x100001E, 0x11E001B,
-+	  0x1390019, 0x1520017, 0x16A0015, 0x1800014, 0x1940014, 0x1A80013,
-+	  0x1BB0012, 0x1CD0011, 0x1DF0010, 0x1EF0010, 0x200000F, 0x20F000F,
-+	  0x21F000E, 0x22D000F, 0x23C000E, 0x24A000E, 0x258000D, 0x265000D,
-+	  0x273000C, 0x27F000D, 0x28C000C, 0x299000C, 0x2A5000C, 0x2B1000B,
-+	  0x2BC000C, 0x2C8000B, 0x2D3000C, 0x2DF000B, 0x2EA000A, 0x2F5000A,
-+	  0x2FF000B, 0x30A000A, 0x314000B, 0x31F000A, 0x329000A, 0x333000A,
-+	  0x33D0009, 0x3470009, 0x350000A, 0x35A0009, 0x363000A, 0x36D0009,
-+	  0x3760009, 0x37F0009, 0x3880009, 0x3910009, 0x39A0009, 0x3A30009,
-+	  0x3AC0008, 0x3B40009, 0x3BD0008, 0x3C60008, 0x3CE0008, 0x3D60009,
-+	  0x3DF0008, 0x3E70008, 0x3EF0008, 0x3F70008 },
-+
-+	/* 2 --> gamma 1/2.2 */
-+	{      0x99,  0x9B0038,  0xD4002A,  0xFF0023, 0x122001F, 0x141001B,
-+	  0x15D0019, 0x1760017, 0x18E0015, 0x1A30015, 0x1B80013, 0x1CC0012,
-+	  0x1DE0011, 0x1F00010, 0x2010010, 0x2110010, 0x221000F, 0x230000F,
-+	  0x23F000E, 0x24D000E, 0x25B000D, 0x269000C, 0x276000C, 0x283000C,
-+	  0x28F000C, 0x29B000C, 0x2A7000C, 0x2B3000B, 0x2BF000B, 0x2CA000B,
-+	  0x2D5000B, 0x2E0000A, 0x2EB000A, 0x2F5000A, 0x2FF000A, 0x30A000A,
-+	  0x3140009, 0x31E0009, 0x327000A, 0x3310009, 0x33A0009, 0x3440009,
-+	  0x34D0009, 0x3560009, 0x35F0009, 0x3680008, 0x3710008, 0x3790009,
-+	  0x3820008, 0x38A0008, 0x3930008, 0x39B0008, 0x3A30008, 0x3AB0008,
-+	  0x3B30008, 0x3BB0008, 0x3C30008, 0x3CB0007, 0x3D20008, 0x3DA0007,
-+	  0x3E20007, 0x3E90007, 0x3F00008, 0x3F80007 },
-+};
-+
- static int isc_parse_dt(struct device *dev, struct isc_device *isc)
- {
- 	struct device_node *np = dev->of_node;
-@@ -171,6 +213,9 @@ static int atmel_isc_probe(struct platfo
- 		return ret;
- 	}
- 
-+	isc->gamma_table = isc_sama5d2_gamma_table;
-+	isc->gamma_max = 2;
-+
- 	ret = isc_pipeline_init(isc);
- 	if (ret)
- 		return ret;
diff --git a/target/linux/at91/patches-5.10/158-media-atmel-atmel-isc-specialize-driver-name-constan.patch b/target/linux/at91/patches-5.10/158-media-atmel-atmel-isc-specialize-driver-name-constan.patch
deleted file mode 100644
index 5fd7be80983f..000000000000
--- a/target/linux/at91/patches-5.10/158-media-atmel-atmel-isc-specialize-driver-name-constan.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 0576e163d93d08a1ed112bd23f40478ef3fd323d Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:00 +0200
-Subject: [PATCH 158/247] media: atmel: atmel-isc: specialize driver name
- constant
-
-The driver name constant must defined based on product driver, thus moving
-the constant directly where it's required. This will allow each ISC based
-product to define it's own name.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    | 4 ++--
- drivers/media/platform/atmel/atmel-isc.h         | 2 --
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 4 ++--
- 3 files changed, 4 insertions(+), 6 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -909,7 +909,7 @@ static int isc_querycap(struct file *fil
- {
- 	struct isc_device *isc = video_drvdata(file);
- 
--	strscpy(cap->driver, ATMEL_ISC_NAME, sizeof(cap->driver));
-+	strscpy(cap->driver, "microchip-isc", sizeof(cap->driver));
- 	strscpy(cap->card, "Atmel Image Sensor Controller", sizeof(cap->card));
- 	snprintf(cap->bus_info, sizeof(cap->bus_info),
- 		 "platform:%s", isc->v4l2_dev.name);
-@@ -2261,7 +2261,7 @@ static int isc_async_complete(struct v4l
- 	}
- 
- 	/* Register video device */
--	strscpy(vdev->name, ATMEL_ISC_NAME, sizeof(vdev->name));
-+	strscpy(vdev->name, "microchip-isc", sizeof(vdev->name));
- 	vdev->release		= video_device_release_empty;
- 	vdev->fops		= &isc_fops;
- 	vdev->ioctl_ops		= &isc_ioctl_ops;
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -255,8 +255,6 @@ struct isc_device {
- 	u32		gamma_max;
- };
- 
--#define ATMEL_ISC_NAME "atmel-isc"
--
- extern struct isc_format formats_list[];
- extern const struct isc_format controller_formats[];
- extern const struct regmap_config isc_regmap_config;
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -206,7 +206,7 @@ static int atmel_isc_probe(struct platfo
- 		return irq;
- 
- 	ret = devm_request_irq(dev, irq, isc_interrupt, 0,
--			       ATMEL_ISC_NAME, isc);
-+			       "atmel-sama5d2-isc", isc);
- 	if (ret < 0) {
- 		dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n",
- 			irq, ret);
-@@ -378,7 +378,7 @@ static struct platform_driver atmel_isc_
- 	.probe	= atmel_isc_probe,
- 	.remove	= atmel_isc_remove,
- 	.driver	= {
--		.name		= ATMEL_ISC_NAME,
-+		.name		= "atmel-sama5d2-isc",
- 		.pm		= &atmel_isc_dev_pm_ops,
- 		.of_match_table = of_match_ptr(atmel_isc_of_match),
- 	},
diff --git a/target/linux/at91/patches-5.10/159-media-atmel-atmel-isc-add-checks-for-limiting-frame-.patch b/target/linux/at91/patches-5.10/159-media-atmel-atmel-isc-add-checks-for-limiting-frame-.patch
deleted file mode 100644
index c6ca456a5631..000000000000
--- a/target/linux/at91/patches-5.10/159-media-atmel-atmel-isc-add-checks-for-limiting-frame-.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From de8fa25cdf3726c83ac0d7b3b1e28bcb6334aadd Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:01 +0200
-Subject: [PATCH 159/247] media: atmel: atmel-isc: add checks for limiting
- frame sizes
-
-When calling the subdev, certain subdev drivers will overwrite the
-frame size and adding sizes which are beyond the ISC's capabilities.
-Thus we need to ensure the frame size is cropped to the maximum caps.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -1338,6 +1338,12 @@ static int isc_try_fmt(struct isc_device
- 
- 	v4l2_fill_pix_format(pixfmt, &format.format);
- 
-+	/* Limit to Atmel ISC hardware capabilities */
-+	if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
-+		pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
-+	if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
-+		pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
-+
- 	pixfmt->field = V4L2_FIELD_NONE;
- 	pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp) >> 3;
- 	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
-@@ -1373,6 +1379,12 @@ static int isc_set_fmt(struct isc_device
- 	if (ret < 0)
- 		return ret;
- 
-+	/* Limit to Atmel ISC hardware capabilities */
-+	if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
-+		pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
-+	if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
-+		pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
-+
- 	isc->fmt = *f;
- 
- 	if (isc->try_config.sd_format && isc->config.sd_format &&
diff --git a/target/linux/at91/patches-5.10/160-media-atmel-atmel-isc-specialize-max-width-and-max-h.patch b/target/linux/at91/patches-5.10/160-media-atmel-atmel-isc-specialize-max-width-and-max-h.patch
deleted file mode 100644
index afa89ed91667..000000000000
--- a/target/linux/at91/patches-5.10/160-media-atmel-atmel-isc-specialize-max-width-and-max-h.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From b51819e17260af2ecc152b7dcd61e63bcaa35edf Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:02 +0200
-Subject: [PATCH 160/247] media: atmel: atmel-isc: specialize max width and max
- height
-
-Move the max width and max height constants to the product specific driver
-and have them in the device struct.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c | 28 +++++++++----------
- drivers/media/platform/atmel/atmel-isc.h      |  9 ++++--
- .../media/platform/atmel/atmel-sama5d2-isc.c  |  7 +++--
- 3 files changed, 25 insertions(+), 19 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -1216,8 +1216,8 @@ static void isc_try_fse(struct isc_devic
- 	 * just use the maximum ISC can receive.
- 	 */
- 	if (ret) {
--		pad_cfg->try_crop.width = ISC_MAX_SUPPORT_WIDTH;
--		pad_cfg->try_crop.height = ISC_MAX_SUPPORT_HEIGHT;
-+		pad_cfg->try_crop.width = isc->max_width;
-+		pad_cfg->try_crop.height = isc->max_height;
- 	} else {
- 		pad_cfg->try_crop.width = fse.max_width;
- 		pad_cfg->try_crop.height = fse.max_height;
-@@ -1294,10 +1294,10 @@ static int isc_try_fmt(struct isc_device
- 	isc->try_config.sd_format = sd_fmt;
- 
- 	/* Limit to Atmel ISC hardware capabilities */
--	if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
--		pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
--	if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
--		pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
-+	if (pixfmt->width > isc->max_width)
-+		pixfmt->width = isc->max_width;
-+	if (pixfmt->height > isc->max_height)
-+		pixfmt->height = isc->max_height;
- 
- 	/*
- 	 * The mbus format is the one the subdev outputs.
-@@ -1339,10 +1339,10 @@ static int isc_try_fmt(struct isc_device
- 	v4l2_fill_pix_format(pixfmt, &format.format);
- 
- 	/* Limit to Atmel ISC hardware capabilities */
--	if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
--		pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
--	if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
--		pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
-+	if (pixfmt->width > isc->max_width)
-+		pixfmt->width = isc->max_width;
-+	if (pixfmt->height > isc->max_height)
-+		pixfmt->height = isc->max_height;
- 
- 	pixfmt->field = V4L2_FIELD_NONE;
- 	pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp) >> 3;
-@@ -1380,10 +1380,10 @@ static int isc_set_fmt(struct isc_device
- 		return ret;
- 
- 	/* Limit to Atmel ISC hardware capabilities */
--	if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
--		pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
--	if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
--		pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
-+	if (f->fmt.pix.width > isc->max_width)
-+		f->fmt.pix.width = isc->max_width;
-+	if (f->fmt.pix.height > isc->max_height)
-+		f->fmt.pix.height = isc->max_height;
- 
- 	isc->fmt = *f;
- 
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -10,9 +10,6 @@
-  */
- #ifndef _ATMEL_ISC_H_
- 
--#define ISC_MAX_SUPPORT_WIDTH   2592
--#define ISC_MAX_SUPPORT_HEIGHT  1944
--
- #define ISC_CLK_MAX_DIV		255
- 
- enum isc_clk_id {
-@@ -190,6 +187,9 @@ struct isc_ctrls {
-  * @gamma_table:	pointer to the table with gamma values, has
-  *			gamma_max sets of GAMMA_ENTRIES entries each
-  * @gamma_max:		maximum number of sets of inside the gamma_table
-+ *
-+ * @max_width:		maximum frame width, dependent on the internal RAM
-+ * @max_height:		maximum frame height, dependent on the internal RAM
-  */
- struct isc_device {
- 	struct regmap		*regmap;
-@@ -253,6 +253,9 @@ struct isc_device {
- 	/* pointer to the defined gamma table */
- 	const u32	(*gamma_table)[GAMMA_ENTRIES];
- 	u32		gamma_max;
-+
-+	u32		max_width;
-+	u32		max_height;
- };
- 
- extern struct isc_format formats_list[];
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -49,8 +49,8 @@
- #include "atmel-isc-regs.h"
- #include "atmel-isc.h"
- 
--#define ISC_MAX_SUPPORT_WIDTH   2592
--#define ISC_MAX_SUPPORT_HEIGHT  1944
-+#define ISC_SAMA5D2_MAX_SUPPORT_WIDTH   2592
-+#define ISC_SAMA5D2_MAX_SUPPORT_HEIGHT  1944
- 
- #define ISC_CLK_MAX_DIV		255
- 
-@@ -216,6 +216,9 @@ static int atmel_isc_probe(struct platfo
- 	isc->gamma_table = isc_sama5d2_gamma_table;
- 	isc->gamma_max = 2;
- 
-+	isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH;
-+	isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT;
-+
- 	ret = isc_pipeline_init(isc);
- 	if (ret)
- 		return ret;
diff --git a/target/linux/at91/patches-5.10/161-media-atmel-atmel-isc-specialize-dma-cfg.patch b/target/linux/at91/patches-5.10/161-media-atmel-atmel-isc-specialize-dma-cfg.patch
deleted file mode 100644
index 410831771e4c..000000000000
--- a/target/linux/at91/patches-5.10/161-media-atmel-atmel-isc-specialize-dma-cfg.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From c42305f52560a1be6fc25a2f23579c7b323de654 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:03 +0200
-Subject: [PATCH 161/247] media: atmel: atmel-isc: specialize dma cfg
-
-The dma configuration (DCFG) is specific to the product.
-Move this configuration in the product specific driver, and add the
-field inside the driver struct.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    | 3 +--
- drivers/media/platform/atmel/atmel-isc.h         | 2 ++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 3 +++
- 3 files changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -724,8 +724,7 @@ static int isc_configure(struct isc_devi
- 	rlp_mode = isc->config.rlp_cfg_mode;
- 	pipeline = isc->config.bits_pipeline;
- 
--	dcfg = isc->config.dcfg_imode |
--		       ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
-+	dcfg = isc->config.dcfg_imode | isc->dcfg;
- 
- 	pfe_cfg0  |= subdev->pfe_cfg0 | ISC_PFE_CFG0_MODE_PROGRESSIVE;
- 	mask = ISC_PFE_CFG0_BPS_MASK | ISC_PFE_CFG0_HPOL_LOW |
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -149,6 +149,7 @@ struct isc_ctrls {
-  * @hclock:		Hclock clock input (refer datasheet)
-  * @ispck:		iscpck clock (refer datasheet)
-  * @isc_clks:		ISC clocks
-+ * @dcfg:		DMA master configuration, architecture dependent
-  *
-  * @dev:		Registered device driver
-  * @v4l2_dev:		v4l2 registered device
-@@ -196,6 +197,7 @@ struct isc_device {
- 	struct clk		*hclock;
- 	struct clk		*ispck;
- 	struct isc_clk		isc_clks[2];
-+	u32			dcfg;
- 
- 	struct device		*dev;
- 	struct v4l2_device	v4l2_dev;
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -219,6 +219,9 @@ static int atmel_isc_probe(struct platfo
- 	isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH;
- 	isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT;
- 
-+	/* sama5d2-isc - 8 bits per beat */
-+	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
-+
- 	ret = isc_pipeline_init(isc);
- 	if (ret)
- 		return ret;
diff --git a/target/linux/at91/patches-5.10/162-media-atmel-atmel-isc-extract-CSC-submodule-config-i.patch b/target/linux/at91/patches-5.10/162-media-atmel-atmel-isc-extract-CSC-submodule-config-i.patch
deleted file mode 100644
index 7b8e8ed697be..000000000000
--- a/target/linux/at91/patches-5.10/162-media-atmel-atmel-isc-extract-CSC-submodule-config-i.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 6ccda3cf6a102ac4f6e21386d0dd0fedfb066525 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:04 +0200
-Subject: [PATCH 162/247] media: atmel: atmel-isc: extract CSC submodule config
- into separate function
-
-The CSC submodule is a part of the atmel-isc pipeline, and stands for
-Color Space Conversion. It is used to apply a matrix transformation to
-RGB pixels to convert them to the YUV components.
-The CSC submodule should be initialized in the product specific driver
-as it's product specific. Other products can implement it differently.
-
-[hverkuil: made isc_sama5d2_config_csc static]
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    |  8 +-------
- drivers/media/platform/atmel/atmel-isc.h         |  7 +++++++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 15 +++++++++++++++
- 3 files changed, 23 insertions(+), 7 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -654,13 +654,7 @@ static void isc_set_pipeline(struct isc_
- 	regmap_bulk_write(regmap, ISC_GAM_GENTRY, gamma, GAMMA_ENTRIES);
- 	regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES);
- 
--	/* Convert RGB to YUV */
--	regmap_write(regmap, ISC_CSC_YR_YG, 0x42 | (0x81 << 16));
--	regmap_write(regmap, ISC_CSC_YB_OY, 0x19 | (0x10 << 16));
--	regmap_write(regmap, ISC_CSC_CBR_CBG, 0xFDA | (0xFB6 << 16));
--	regmap_write(regmap, ISC_CSC_CBB_OCB, 0x70 | (0x80 << 16));
--	regmap_write(regmap, ISC_CSC_CRR_CRG, 0x70 | (0xFA2 << 16));
--	regmap_write(regmap, ISC_CSC_CRB_OCR, 0xFEE | (0x80 << 16));
-+	isc->config_csc(isc);
- 
- 	regmap_write(regmap, ISC_CBC_BRIGHT, ctrls->brightness);
- 	regmap_write(regmap, ISC_CBC_CONTRAST, ctrls->contrast);
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -191,6 +191,9 @@ struct isc_ctrls {
-  *
-  * @max_width:		maximum frame width, dependent on the internal RAM
-  * @max_height:		maximum frame height, dependent on the internal RAM
-+ *
-+ * @config_csc:		pointer to a function that initializes product
-+ *			specific CSC module
-  */
- struct isc_device {
- 	struct regmap		*regmap;
-@@ -258,6 +261,10 @@ struct isc_device {
- 
- 	u32		max_width;
- 	u32		max_height;
-+
-+	struct {
-+		void (*config_csc)(struct isc_device *isc);
-+	};
- };
- 
- extern struct isc_format formats_list[];
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -54,6 +54,19 @@
- 
- #define ISC_CLK_MAX_DIV		255
- 
-+static void isc_sama5d2_config_csc(struct isc_device *isc)
-+{
-+	struct regmap *regmap = isc->regmap;
-+
-+	/* Convert RGB to YUV */
-+	regmap_write(regmap, ISC_CSC_YR_YG, 0x42 | (0x81 << 16));
-+	regmap_write(regmap, ISC_CSC_YB_OY, 0x19 | (0x10 << 16));
-+	regmap_write(regmap, ISC_CSC_CBR_CBG, 0xFDA | (0xFB6 << 16));
-+	regmap_write(regmap, ISC_CSC_CBB_OCB, 0x70 | (0x80 << 16));
-+	regmap_write(regmap, ISC_CSC_CRR_CRG, 0x70 | (0xFA2 << 16));
-+	regmap_write(regmap, ISC_CSC_CRB_OCR, 0xFEE | (0x80 << 16));
-+}
-+
- /* Gamma table with gamma 1/2.2 */
- static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
- 	/* 0 --> gamma 1/1.8 */
-@@ -219,6 +232,8 @@ static int atmel_isc_probe(struct platfo
- 	isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH;
- 	isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT;
- 
-+	isc->config_csc = isc_sama5d2_config_csc;
-+
- 	/* sama5d2-isc - 8 bits per beat */
- 	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
- 
diff --git a/target/linux/at91/patches-5.10/163-media-atmel-atmel-isc-base-add-id-to-clock-debug-mes.patch b/target/linux/at91/patches-5.10/163-media-atmel-atmel-isc-base-add-id-to-clock-debug-mes.patch
deleted file mode 100644
index 832465363b7e..000000000000
--- a/target/linux/at91/patches-5.10/163-media-atmel-atmel-isc-base-add-id-to-clock-debug-mes.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 19dd7c72c6c457c147133a7dad8ab28d35538f99 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:05 +0200
-Subject: [PATCH 163/247] media: atmel: atmel-isc-base: add id to clock debug
- message
-
-Add the clock id to the debug message regarding clock setup
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -281,8 +281,8 @@ static int isc_clk_enable(struct clk_hw
- 	unsigned long flags;
- 	unsigned int status;
- 
--	dev_dbg(isc_clk->dev, "ISC CLK: %s, div = %d, parent id = %d\n",
--		__func__, isc_clk->div, isc_clk->parent_id);
-+	dev_dbg(isc_clk->dev, "ISC CLK: %s, id = %d, div = %d, parent id = %d\n",
-+		__func__, id, isc_clk->div, isc_clk->parent_id);
- 
- 	spin_lock_irqsave(&isc_clk->lock, flags);
- 	regmap_update_bits(regmap, ISC_CLKCFG,
diff --git a/target/linux/at91/patches-5.10/164-media-atmel-atmel-isc-create-register-offsets-struct.patch b/target/linux/at91/patches-5.10/164-media-atmel-atmel-isc-create-register-offsets-struct.patch
deleted file mode 100644
index bb599618d13a..000000000000
--- a/target/linux/at91/patches-5.10/164-media-atmel-atmel-isc-create-register-offsets-struct.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 7a1b082cd81a2496e2687cee7ea1ef04a3020f48 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:06 +0200
-Subject: [PATCH 164/247] media: atmel: atmel-isc: create register offsets
- struct
-
-Create a struct that holds register offsets that are product specific.
-Add initially the CSC register.
-This allows each product that contains a variant of the ISC to add their
-own register offset.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c |  2 +-
- drivers/media/platform/atmel/atmel-isc-regs.h |  3 +++
- drivers/media/platform/atmel/atmel-isc.h      | 12 +++++++++++
- .../media/platform/atmel/atmel-sama5d2-isc.c  | 20 +++++++++++++------
- 4 files changed, 30 insertions(+), 7 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -2326,7 +2326,7 @@ int isc_pipeline_init(struct isc_device
- 		REG_FIELD(ISC_GAM_CTRL, 1, 1),
- 		REG_FIELD(ISC_GAM_CTRL, 2, 2),
- 		REG_FIELD(ISC_GAM_CTRL, 3, 3),
--		REG_FIELD(ISC_CSC_CTRL, 0, 0),
-+		REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0),
- 		REG_FIELD(ISC_CBC_CTRL, 0, 0),
- 		REG_FIELD(ISC_SUB422_CTRL, 0, 0),
- 		REG_FIELD(ISC_SUB420_CTRL, 0, 0),
---- a/drivers/media/platform/atmel/atmel-isc-regs.h
-+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
-@@ -153,6 +153,9 @@
- /* ISC_Gamma Correction Green Entry Register */
- #define ISC_GAM_RENTRY	0x00000298
- 
-+/* Offset for CSC register specific to sama5d2 product */
-+#define ISC_SAMA5D2_CSC_OFFSET	0
-+
- /* Color Space Conversion Control Register */
- #define ISC_CSC_CTRL    0x00000398
- 
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -144,6 +144,14 @@ struct isc_ctrls {
- #define ISC_PIPE_LINE_NODE_NUM	11
- 
- /*
-+ * struct isc_reg_offsets - ISC device register offsets
-+ * @csc:		Offset for the CSC register
-+ */
-+struct isc_reg_offsets {
-+	u32 csc;
-+};
-+
-+/*
-  * struct isc_device - ISC device driver data/config struct
-  * @regmap:		Register map
-  * @hclock:		Hclock clock input (refer datasheet)
-@@ -194,6 +202,8 @@ struct isc_ctrls {
-  *
-  * @config_csc:		pointer to a function that initializes product
-  *			specific CSC module
-+ *
-+ * @offsets:		struct holding the product specific register offsets
-  */
- struct isc_device {
- 	struct regmap		*regmap;
-@@ -265,6 +275,8 @@ struct isc_device {
- 	struct {
- 		void (*config_csc)(struct isc_device *isc);
- 	};
-+
-+	struct isc_reg_offsets		offsets;
- };
- 
- extern struct isc_format formats_list[];
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -59,12 +59,18 @@ static void isc_sama5d2_config_csc(struc
- 	struct regmap *regmap = isc->regmap;
- 
- 	/* Convert RGB to YUV */
--	regmap_write(regmap, ISC_CSC_YR_YG, 0x42 | (0x81 << 16));
--	regmap_write(regmap, ISC_CSC_YB_OY, 0x19 | (0x10 << 16));
--	regmap_write(regmap, ISC_CSC_CBR_CBG, 0xFDA | (0xFB6 << 16));
--	regmap_write(regmap, ISC_CSC_CBB_OCB, 0x70 | (0x80 << 16));
--	regmap_write(regmap, ISC_CSC_CRR_CRG, 0x70 | (0xFA2 << 16));
--	regmap_write(regmap, ISC_CSC_CRB_OCR, 0xFEE | (0x80 << 16));
-+	regmap_write(regmap, ISC_CSC_YR_YG + isc->offsets.csc,
-+		     0x42 | (0x81 << 16));
-+	regmap_write(regmap, ISC_CSC_YB_OY + isc->offsets.csc,
-+		     0x19 | (0x10 << 16));
-+	regmap_write(regmap, ISC_CSC_CBR_CBG + isc->offsets.csc,
-+		     0xFDA | (0xFB6 << 16));
-+	regmap_write(regmap, ISC_CSC_CBB_OCB + isc->offsets.csc,
-+		     0x70 | (0x80 << 16));
-+	regmap_write(regmap, ISC_CSC_CRR_CRG + isc->offsets.csc,
-+		     0x70 | (0xFA2 << 16));
-+	regmap_write(regmap, ISC_CSC_CRB_OCR + isc->offsets.csc,
-+		     0xFEE | (0x80 << 16));
- }
- 
- /* Gamma table with gamma 1/2.2 */
-@@ -234,6 +240,8 @@ static int atmel_isc_probe(struct platfo
- 
- 	isc->config_csc = isc_sama5d2_config_csc;
- 
-+	isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
-+
- 	/* sama5d2-isc - 8 bits per beat */
- 	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
- 
diff --git a/target/linux/at91/patches-5.10/165-media-atmel-atmel-isc-extract-CBC-submodule-config-i.patch b/target/linux/at91/patches-5.10/165-media-atmel-atmel-isc-extract-CBC-submodule-config-i.patch
deleted file mode 100644
index fd7ed1e94d87..000000000000
--- a/target/linux/at91/patches-5.10/165-media-atmel-atmel-isc-extract-CBC-submodule-config-i.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From aa31e58d80d233385fa3b972e6b85f293e2a9093 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:07 +0200
-Subject: [PATCH 165/247] media: atmel: atmel-isc: extract CBC submodule config
- into separate function
-
-The CBC submodule is a part of the atmel-isc pipeline, and stands for
-Contrast Brightness Control. It is used to apply gains and offsets to the
-luma (Y) and chroma (U, V) components of the YUV elements.
-The CBC submodule should be initialized in the product specific driver
-as it's product specific. Other products can implement it differently
-
-[hverkuil: made isc_sama5d2_config_cbc static]
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    | 4 +---
- drivers/media/platform/atmel/atmel-isc.h         | 3 +++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 9 +++++++++
- 3 files changed, 13 insertions(+), 3 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -655,9 +655,7 @@ static void isc_set_pipeline(struct isc_
- 	regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES);
- 
- 	isc->config_csc(isc);
--
--	regmap_write(regmap, ISC_CBC_BRIGHT, ctrls->brightness);
--	regmap_write(regmap, ISC_CBC_CONTRAST, ctrls->contrast);
-+	isc->config_cbc(isc);
- }
- 
- static int isc_update_profile(struct isc_device *isc)
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -202,6 +202,8 @@ struct isc_reg_offsets {
-  *
-  * @config_csc:		pointer to a function that initializes product
-  *			specific CSC module
-+ * @config_cbc:		pointer to a function that initializes product
-+ *			specific CBC module
-  *
-  * @offsets:		struct holding the product specific register offsets
-  */
-@@ -274,6 +276,7 @@ struct isc_device {
- 
- 	struct {
- 		void (*config_csc)(struct isc_device *isc);
-+		void (*config_cbc)(struct isc_device *isc);
- 	};
- 
- 	struct isc_reg_offsets		offsets;
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -73,6 +73,14 @@ static void isc_sama5d2_config_csc(struc
- 		     0xFEE | (0x80 << 16));
- }
- 
-+static void isc_sama5d2_config_cbc(struct isc_device *isc)
-+{
-+	struct regmap *regmap = isc->regmap;
-+
-+	regmap_write(regmap, ISC_CBC_BRIGHT, isc->ctrls.brightness);
-+	regmap_write(regmap, ISC_CBC_CONTRAST, isc->ctrls.contrast);
-+}
-+
- /* Gamma table with gamma 1/2.2 */
- static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
- 	/* 0 --> gamma 1/1.8 */
-@@ -239,6 +247,7 @@ static int atmel_isc_probe(struct platfo
- 	isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT;
- 
- 	isc->config_csc = isc_sama5d2_config_csc;
-+	isc->config_cbc = isc_sama5d2_config_cbc;
- 
- 	isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
- 
diff --git a/target/linux/at91/patches-5.10/166-media-atmel-atmel-isc-add-CBC-to-the-reg-offsets-str.patch b/target/linux/at91/patches-5.10/166-media-atmel-atmel-isc-add-CBC-to-the-reg-offsets-str.patch
deleted file mode 100644
index 51659f54a409..000000000000
--- a/target/linux/at91/patches-5.10/166-media-atmel-atmel-isc-add-CBC-to-the-reg-offsets-str.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 52e4b779ae1af3e322d0c673375dcd51315739d4 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:08 +0200
-Subject: [PATCH 166/247] media: atmel: atmel-isc: add CBC to the reg offsets
- struct
-
-The CBC submodule is a part of the atmel-isc pipeline, and stands for
-Contrast Brightness Control. It is used to apply gains and offsets to the
-luma (Y) and chroma (U, V) components of the YUV elements.
-Add cbc to the reg offsets struct. This will allow different products
-to have a different reg offset for this particular module.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    | 2 +-
- drivers/media/platform/atmel/atmel-isc-regs.h    | 3 +++
- drivers/media/platform/atmel/atmel-isc.h         | 2 ++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 7 +++++--
- 4 files changed, 11 insertions(+), 3 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -2325,7 +2325,7 @@ int isc_pipeline_init(struct isc_device
- 		REG_FIELD(ISC_GAM_CTRL, 2, 2),
- 		REG_FIELD(ISC_GAM_CTRL, 3, 3),
- 		REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0),
--		REG_FIELD(ISC_CBC_CTRL, 0, 0),
-+		REG_FIELD(ISC_CBC_CTRL + isc->offsets.cbc, 0, 0),
- 		REG_FIELD(ISC_SUB422_CTRL, 0, 0),
- 		REG_FIELD(ISC_SUB420_CTRL, 0, 0),
- 	};
---- a/drivers/media/platform/atmel/atmel-isc-regs.h
-+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
-@@ -177,6 +177,9 @@
- /* Color Space Conversion CRB OCR Register */
- #define ISC_CSC_CRB_OCR	0x000003b0
- 
-+/* Offset for CBC register specific to sama5d2 product */
-+#define ISC_SAMA5D2_CBC_OFFSET	0
-+
- /* Contrast And Brightness Control Register */
- #define ISC_CBC_CTRL    0x000003b4
- 
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -146,9 +146,11 @@ struct isc_ctrls {
- /*
-  * struct isc_reg_offsets - ISC device register offsets
-  * @csc:		Offset for the CSC register
-+ * @cbc:		Offset for the CBC register
-  */
- struct isc_reg_offsets {
- 	u32 csc;
-+	u32 cbc;
- };
- 
- /*
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -77,8 +77,10 @@ static void isc_sama5d2_config_cbc(struc
- {
- 	struct regmap *regmap = isc->regmap;
- 
--	regmap_write(regmap, ISC_CBC_BRIGHT, isc->ctrls.brightness);
--	regmap_write(regmap, ISC_CBC_CONTRAST, isc->ctrls.contrast);
-+	regmap_write(regmap, ISC_CBC_BRIGHT + isc->offsets.cbc,
-+		     isc->ctrls.brightness);
-+	regmap_write(regmap, ISC_CBC_CONTRAST + isc->offsets.cbc,
-+		     isc->ctrls.contrast);
- }
- 
- /* Gamma table with gamma 1/2.2 */
-@@ -250,6 +252,7 @@ static int atmel_isc_probe(struct platfo
- 	isc->config_cbc = isc_sama5d2_config_cbc;
- 
- 	isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
-+	isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET;
- 
- 	/* sama5d2-isc - 8 bits per beat */
- 	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
diff --git a/target/linux/at91/patches-5.10/167-media-atmel-atmel-isc-add-SUB422-and-SUB420-to-regis.patch b/target/linux/at91/patches-5.10/167-media-atmel-atmel-isc-add-SUB422-and-SUB420-to-regis.patch
deleted file mode 100644
index 6d937fdeb7ba..000000000000
--- a/target/linux/at91/patches-5.10/167-media-atmel-atmel-isc-add-SUB422-and-SUB420-to-regis.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From aebb741058a63c3493f4139d11d6f290d5691e9b Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:09 +0200
-Subject: [PATCH 167/247] media: atmel: atmel-isc: add SUB422 and SUB420 to
- register offsets
-
-The SUB submodules are a part of the atmel-isc pipeline, and stand for
-Subsampling. They are used to subsample the original YUV 4:4:4 pixel ratio
-aspect to either 4:2:2 or 4:2:0.
-Add sub420 and sub422 to the reg offsets struct.
-This will allow different products to have a different reg offset for these
-particular modules.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    | 4 ++--
- drivers/media/platform/atmel/atmel-isc-regs.h    | 4 ++++
- drivers/media/platform/atmel/atmel-isc.h         | 4 ++++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 2 ++
- 4 files changed, 12 insertions(+), 2 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -2326,8 +2326,8 @@ int isc_pipeline_init(struct isc_device
- 		REG_FIELD(ISC_GAM_CTRL, 3, 3),
- 		REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0),
- 		REG_FIELD(ISC_CBC_CTRL + isc->offsets.cbc, 0, 0),
--		REG_FIELD(ISC_SUB422_CTRL, 0, 0),
--		REG_FIELD(ISC_SUB420_CTRL, 0, 0),
-+		REG_FIELD(ISC_SUB422_CTRL + isc->offsets.sub422, 0, 0),
-+		REG_FIELD(ISC_SUB420_CTRL + isc->offsets.sub420, 0, 0),
- 	};
- 
- 	for (i = 0; i < ISC_PIPE_LINE_NODE_NUM; i++) {
---- a/drivers/media/platform/atmel/atmel-isc-regs.h
-+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
-@@ -194,9 +194,13 @@
- #define ISC_CBC_CONTRAST	0x000003c0
- #define ISC_CBC_CONTRAST_MASK	GENMASK(11, 0)
- 
-+/* Offset for SUB422 register specific to sama5d2 product */
-+#define ISC_SAMA5D2_SUB422_OFFSET	0
- /* Subsampling 4:4:4 to 4:2:2 Control Register */
- #define ISC_SUB422_CTRL 0x000003c4
- 
-+/* Offset for SUB420 register specific to sama5d2 product */
-+#define ISC_SAMA5D2_SUB420_OFFSET	0
- /* Subsampling 4:2:2 to 4:2:0 Control Register */
- #define ISC_SUB420_CTRL 0x000003cc
- 
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -147,10 +147,14 @@ struct isc_ctrls {
-  * struct isc_reg_offsets - ISC device register offsets
-  * @csc:		Offset for the CSC register
-  * @cbc:		Offset for the CBC register
-+ * @sub422:		Offset for the SUB422 register
-+ * @sub420:		Offset for the SUB420 register
-  */
- struct isc_reg_offsets {
- 	u32 csc;
- 	u32 cbc;
-+	u32 sub422;
-+	u32 sub420;
- };
- 
- /*
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -253,6 +253,8 @@ static int atmel_isc_probe(struct platfo
- 
- 	isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
- 	isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET;
-+	isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET;
-+	isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET;
- 
- 	/* sama5d2-isc - 8 bits per beat */
- 	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
diff --git a/target/linux/at91/patches-5.10/168-media-atmel-atmel-isc-add-RLP-to-register-offsets.patch b/target/linux/at91/patches-5.10/168-media-atmel-atmel-isc-add-RLP-to-register-offsets.patch
deleted file mode 100644
index 050e2816c034..000000000000
--- a/target/linux/at91/patches-5.10/168-media-atmel-atmel-isc-add-RLP-to-register-offsets.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From b432a8b0fc88de5b49236482053d8d372c68ee55 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:10 +0200
-Subject: [PATCH 168/247] media: atmel: atmel-isc: add RLP to register offsets
-
-The RLP submodule is a part of the atmel-isc pipeline, and stands for
-Rounding,Limiting and Packaging. It used to extract specific data from the
-ISC pipeline. For example if we want to output greyscale 8 bit, we would
-use limiting to 8 bits, and packaging to Luma component only.
-Add rlp to the reg offsets struct.
-This will allow different products to have a different reg offset for this
-particular module.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    | 4 ++--
- drivers/media/platform/atmel/atmel-isc-regs.h    | 2 ++
- drivers/media/platform/atmel/atmel-isc.h         | 2 ++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 1 +
- 4 files changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -726,8 +726,8 @@ static int isc_configure(struct isc_devi
- 
- 	regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0);
- 
--	regmap_update_bits(regmap, ISC_RLP_CFG, ISC_RLP_CFG_MODE_MASK,
--			   rlp_mode);
-+	regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
-+			   ISC_RLP_CFG_MODE_MASK, rlp_mode);
- 
- 	regmap_write(regmap, ISC_DCFG, dcfg);
- 
---- a/drivers/media/platform/atmel/atmel-isc-regs.h
-+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
-@@ -204,6 +204,8 @@
- /* Subsampling 4:2:2 to 4:2:0 Control Register */
- #define ISC_SUB420_CTRL 0x000003cc
- 
-+/* Offset for RLP register specific to sama5d2 product */
-+#define ISC_SAMA5D2_RLP_OFFSET	0
- /* Rounding, Limiting and Packing Configuration Register */
- #define ISC_RLP_CFG     0x000003d0
- 
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -149,12 +149,14 @@ struct isc_ctrls {
-  * @cbc:		Offset for the CBC register
-  * @sub422:		Offset for the SUB422 register
-  * @sub420:		Offset for the SUB420 register
-+ * @rlp:		Offset for the RLP register
-  */
- struct isc_reg_offsets {
- 	u32 csc;
- 	u32 cbc;
- 	u32 sub422;
- 	u32 sub420;
-+	u32 rlp;
- };
- 
- /*
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -255,6 +255,7 @@ static int atmel_isc_probe(struct platfo
- 	isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET;
- 	isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET;
- 	isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET;
-+	isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET;
- 
- 	/* sama5d2-isc - 8 bits per beat */
- 	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
diff --git a/target/linux/at91/patches-5.10/169-media-atmel-atmel-isc-add-HIS-to-register-offsets.patch b/target/linux/at91/patches-5.10/169-media-atmel-atmel-isc-add-HIS-to-register-offsets.patch
deleted file mode 100644
index 6ce49e67ff5a..000000000000
--- a/target/linux/at91/patches-5.10/169-media-atmel-atmel-isc-add-HIS-to-register-offsets.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 8c19aa14b8303a0e7c4bae42f3f00f9a2a65b0db Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:11 +0200
-Subject: [PATCH 169/247] media: atmel: atmel-isc: add HIS to register offsets
-
-The HIS submodule is a part of the atmel-isc pipeline, and stands for
-Histogram. This module performs a color histogram that can be read and used
-by the main processor.
-Add his to the reg offsets struct.
-This will allow different products to have a different reg offset for this
-particular module.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    | 11 +++++++----
- drivers/media/platform/atmel/atmel-isc-regs.h    |  2 ++
- drivers/media/platform/atmel/atmel-isc.h         |  2 ++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c |  1 +
- 4 files changed, 12 insertions(+), 4 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -686,12 +686,13 @@ static void isc_set_histogram(struct isc
- 	struct isc_ctrls *ctrls = &isc->ctrls;
- 
- 	if (enable) {
--		regmap_write(regmap, ISC_HIS_CFG,
-+		regmap_write(regmap, ISC_HIS_CFG + isc->offsets.his,
- 			     ISC_HIS_CFG_MODE_GR |
- 			     (isc->config.sd_format->cfa_baycfg
- 					<< ISC_HIS_CFG_BAYSEL_SHIFT) |
- 					ISC_HIS_CFG_RAR);
--		regmap_write(regmap, ISC_HIS_CTRL, ISC_HIS_CTRL_EN);
-+		regmap_write(regmap, ISC_HIS_CTRL + isc->offsets.his,
-+			     ISC_HIS_CTRL_EN);
- 		regmap_write(regmap, ISC_INTEN, ISC_INT_HISDONE);
- 		ctrls->hist_id = ISC_HIS_CFG_MODE_GR;
- 		isc_update_profile(isc);
-@@ -700,7 +701,8 @@ static void isc_set_histogram(struct isc
- 		ctrls->hist_stat = HIST_ENABLED;
- 	} else {
- 		regmap_write(regmap, ISC_INTDIS, ISC_INT_HISDONE);
--		regmap_write(regmap, ISC_HIS_CTRL, ISC_HIS_CTRL_DIS);
-+		regmap_write(regmap, ISC_HIS_CTRL + isc->offsets.his,
-+			     ISC_HIS_CTRL_DIS);
- 
- 		ctrls->hist_stat = HIST_DISABLED;
- 	}
-@@ -1836,7 +1838,8 @@ static void isc_awb_work(struct work_str
- 			ctrls->awb = ISC_WB_NONE;
- 		}
- 	}
--	regmap_write(regmap, ISC_HIS_CFG, hist_id | baysel | ISC_HIS_CFG_RAR);
-+	regmap_write(regmap, ISC_HIS_CFG + isc->offsets.his,
-+		     hist_id | baysel | ISC_HIS_CFG_RAR);
- 	isc_update_profile(isc);
- 	/* if awb has been disabled, we don't need to start another histogram */
- 	if (ctrls->awb)
---- a/drivers/media/platform/atmel/atmel-isc-regs.h
-+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
-@@ -224,6 +224,8 @@
- #define ISC_RLP_CFG_MODE_YYCC_LIMITED   0xc
- #define ISC_RLP_CFG_MODE_MASK           GENMASK(3, 0)
- 
-+/* Offset for HIS register specific to sama5d2 product */
-+#define ISC_SAMA5D2_HIS_OFFSET	0
- /* Histogram Control Register */
- #define ISC_HIS_CTRL	0x000003d4
- 
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -150,6 +150,7 @@ struct isc_ctrls {
-  * @sub422:		Offset for the SUB422 register
-  * @sub420:		Offset for the SUB420 register
-  * @rlp:		Offset for the RLP register
-+ * @his:		Offset for the HIS related registers
-  */
- struct isc_reg_offsets {
- 	u32 csc;
-@@ -157,6 +158,7 @@ struct isc_reg_offsets {
- 	u32 sub422;
- 	u32 sub420;
- 	u32 rlp;
-+	u32 his;
- };
- 
- /*
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -256,6 +256,7 @@ static int atmel_isc_probe(struct platfo
- 	isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET;
- 	isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET;
- 	isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET;
-+	isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET;
- 
- 	/* sama5d2-isc - 8 bits per beat */
- 	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
diff --git a/target/linux/at91/patches-5.10/170-media-atmel-atmel-isc-add-DMA-to-register-offsets.patch b/target/linux/at91/patches-5.10/170-media-atmel-atmel-isc-add-DMA-to-register-offsets.patch
deleted file mode 100644
index ef7104e5875d..000000000000
--- a/target/linux/at91/patches-5.10/170-media-atmel-atmel-isc-add-DMA-to-register-offsets.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From 7173e54070a9b530c8c16e0a507be71385133abd Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:12 +0200
-Subject: [PATCH 170/247] media: atmel: atmel-isc: add DMA to register offsets
-
-The DMA submodule is a part of the atmel-isc pipeline, and stands for
-Direct Memory Access. It acts like a master on the AXI bus of the SoC, and
-can directly write the RAM area with the pixel data from the ISC internal
-sram.
-Add dma to the reg offsets struct.
-This will allow different products to have a different reg offset for this
-particular module.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c | 19 ++++++++++++-------
- drivers/media/platform/atmel/atmel-isc-regs.h |  3 +++
- drivers/media/platform/atmel/atmel-isc.h      |  2 ++
- .../media/platform/atmel/atmel-sama5d2-isc.c  |  1 +
- 4 files changed, 18 insertions(+), 7 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -601,16 +601,20 @@ static void isc_start_dma(struct isc_dev
- 			   ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN);
- 
- 	addr0 = vb2_dma_contig_plane_dma_addr(&isc->cur_frm->vb.vb2_buf, 0);
--	regmap_write(regmap, ISC_DAD0, addr0);
-+	regmap_write(regmap, ISC_DAD0 + isc->offsets.dma, addr0);
- 
- 	switch (isc->config.fourcc) {
- 	case V4L2_PIX_FMT_YUV420:
--		regmap_write(regmap, ISC_DAD1, addr0 + (sizeimage * 2) / 3);
--		regmap_write(regmap, ISC_DAD2, addr0 + (sizeimage * 5) / 6);
-+		regmap_write(regmap, ISC_DAD1 + isc->offsets.dma,
-+			     addr0 + (sizeimage * 2) / 3);
-+		regmap_write(regmap, ISC_DAD2 + isc->offsets.dma,
-+			     addr0 + (sizeimage * 5) / 6);
- 		break;
- 	case V4L2_PIX_FMT_YUV422P:
--		regmap_write(regmap, ISC_DAD1, addr0 + sizeimage / 2);
--		regmap_write(regmap, ISC_DAD2, addr0 + (sizeimage * 3) / 4);
-+		regmap_write(regmap, ISC_DAD1 + isc->offsets.dma,
-+			     addr0 + sizeimage / 2);
-+		regmap_write(regmap, ISC_DAD2 + isc->offsets.dma,
-+			     addr0 + (sizeimage * 3) / 4);
- 		break;
- 	default:
- 		break;
-@@ -618,7 +622,8 @@ static void isc_start_dma(struct isc_dev
- 
- 	dctrl_dview = isc->config.dctrl_dview;
- 
--	regmap_write(regmap, ISC_DCTRL, dctrl_dview | ISC_DCTRL_IE_IS);
-+	regmap_write(regmap, ISC_DCTRL + isc->offsets.dma,
-+		     dctrl_dview | ISC_DCTRL_IE_IS);
- 	spin_lock(&isc->awb_lock);
- 	regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_CAPTURE);
- 	spin_unlock(&isc->awb_lock);
-@@ -731,7 +736,7 @@ static int isc_configure(struct isc_devi
- 	regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
- 			   ISC_RLP_CFG_MODE_MASK, rlp_mode);
- 
--	regmap_write(regmap, ISC_DCFG, dcfg);
-+	regmap_write(regmap, ISC_DCFG + isc->offsets.dma, dcfg);
- 
- 	/* Set the pipeline */
- 	isc_set_pipeline(isc, pipeline);
---- a/drivers/media/platform/atmel/atmel-isc-regs.h
-+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
-@@ -247,6 +247,9 @@
- 
- #define ISC_HIS_CFG_RAR			BIT(8)
- 
-+/* Offset for DMA register specific to sama5d2 product */
-+#define ISC_SAMA5D2_DMA_OFFSET	0
-+
- /* DMA Configuration Register */
- #define ISC_DCFG        0x000003e0
- #define ISC_DCFG_IMODE_PACKED8          0x0
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -151,6 +151,7 @@ struct isc_ctrls {
-  * @sub420:		Offset for the SUB420 register
-  * @rlp:		Offset for the RLP register
-  * @his:		Offset for the HIS related registers
-+ * @dma:		Offset for the DMA related registers
-  */
- struct isc_reg_offsets {
- 	u32 csc;
-@@ -159,6 +160,7 @@ struct isc_reg_offsets {
- 	u32 sub420;
- 	u32 rlp;
- 	u32 his;
-+	u32 dma;
- };
- 
- /*
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -257,6 +257,7 @@ static int atmel_isc_probe(struct platfo
- 	isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET;
- 	isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET;
- 	isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET;
-+	isc->offsets.dma = ISC_SAMA5D2_DMA_OFFSET;
- 
- 	/* sama5d2-isc - 8 bits per beat */
- 	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
diff --git a/target/linux/at91/patches-5.10/171-media-atmel-atmel-isc-add-support-for-version-regist.patch b/target/linux/at91/patches-5.10/171-media-atmel-atmel-isc-add-support-for-version-regist.patch
deleted file mode 100644
index b582945b990e..000000000000
--- a/target/linux/at91/patches-5.10/171-media-atmel-atmel-isc-add-support-for-version-regist.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 0939b0a92acca11a5a3b0de5dd70434e17e40ed3 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:13 +0200
-Subject: [PATCH 171/247] media: atmel: atmel-isc: add support for version
- register
-
-Add support for version register and print it at probe time.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-regs.h    | 5 +++++
- drivers/media/platform/atmel/atmel-isc.h         | 2 ++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 5 +++++
- 3 files changed, 12 insertions(+)
-
---- a/drivers/media/platform/atmel/atmel-isc-regs.h
-+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
-@@ -295,6 +295,11 @@
- /* DMA Address 2 Register */
- #define ISC_DAD2        0x000003fc
- 
-+/* Offset for version register specific to sama5d2 product */
-+#define ISC_SAMA5D2_VERSION_OFFSET	0
-+/* Version Register */
-+#define ISC_VERSION	0x0000040c
-+
- /* Histogram Entry */
- #define ISC_HIS_ENTRY	0x00000410
- 
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -152,6 +152,7 @@ struct isc_ctrls {
-  * @rlp:		Offset for the RLP register
-  * @his:		Offset for the HIS related registers
-  * @dma:		Offset for the DMA related registers
-+ * @version:		Offset for the version register
-  */
- struct isc_reg_offsets {
- 	u32 csc;
-@@ -161,6 +162,7 @@ struct isc_reg_offsets {
- 	u32 rlp;
- 	u32 his;
- 	u32 dma;
-+	u32 version;
- };
- 
- /*
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -210,6 +210,7 @@ static int atmel_isc_probe(struct platfo
- 	struct isc_subdev_entity *subdev_entity;
- 	int irq;
- 	int ret;
-+	u32 ver;
- 
- 	isc = devm_kzalloc(dev, sizeof(*isc), GFP_KERNEL);
- 	if (!isc)
-@@ -258,6 +259,7 @@ static int atmel_isc_probe(struct platfo
- 	isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET;
- 	isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET;
- 	isc->offsets.dma = ISC_SAMA5D2_DMA_OFFSET;
-+	isc->offsets.version = ISC_SAMA5D2_VERSION_OFFSET;
- 
- 	/* sama5d2-isc - 8 bits per beat */
- 	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
-@@ -346,6 +348,9 @@ static int atmel_isc_probe(struct platfo
- 	pm_runtime_enable(dev);
- 	pm_request_idle(dev);
- 
-+	regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
-+	dev_info(dev, "Microchip ISC version %x\n", ver);
-+
- 	return 0;
- 
- cleanup_subdev:
diff --git a/target/linux/at91/patches-5.10/172-media-atmel-atmel-isc-add-his_entry-to-register-offs.patch b/target/linux/at91/patches-5.10/172-media-atmel-atmel-isc-add-his_entry-to-register-offs.patch
deleted file mode 100644
index c48301cf25fc..000000000000
--- a/target/linux/at91/patches-5.10/172-media-atmel-atmel-isc-add-his_entry-to-register-offs.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From bce46a8a620a796ca3cfe5bff61baf6744074986 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:14 +0200
-Subject: [PATCH 172/247] media: atmel: atmel-isc: add his_entry to register
- offsets
-
-Add his_entry to the reg offsets struct.
-This will allow different products to have a different reg offset for this
-particular module.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    | 3 ++-
- drivers/media/platform/atmel/atmel-isc-regs.h    | 2 ++
- drivers/media/platform/atmel/atmel-isc.h         | 2 ++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 1 +
- 4 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -1684,7 +1684,8 @@ static void isc_hist_count(struct isc_de
- 	*min = 0;
- 	*max = HIST_ENTRIES;
- 
--	regmap_bulk_read(regmap, ISC_HIS_ENTRY, hist_entry, HIST_ENTRIES);
-+	regmap_bulk_read(regmap, ISC_HIS_ENTRY + isc->offsets.his_entry,
-+			 hist_entry, HIST_ENTRIES);
- 
- 	*hist_count = 0;
- 	/*
---- a/drivers/media/platform/atmel/atmel-isc-regs.h
-+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
-@@ -300,6 +300,8 @@
- /* Version Register */
- #define ISC_VERSION	0x0000040c
- 
-+/* Offset for version register specific to sama5d2 product */
-+#define ISC_SAMA5D2_HIS_ENTRY_OFFSET	0
- /* Histogram Entry */
- #define ISC_HIS_ENTRY	0x00000410
- 
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -153,6 +153,7 @@ struct isc_ctrls {
-  * @his:		Offset for the HIS related registers
-  * @dma:		Offset for the DMA related registers
-  * @version:		Offset for the version register
-+ * @his_entry:		Offset for the HIS entries registers
-  */
- struct isc_reg_offsets {
- 	u32 csc;
-@@ -163,6 +164,7 @@ struct isc_reg_offsets {
- 	u32 his;
- 	u32 dma;
- 	u32 version;
-+	u32 his_entry;
- };
- 
- /*
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -260,6 +260,7 @@ static int atmel_isc_probe(struct platfo
- 	isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET;
- 	isc->offsets.dma = ISC_SAMA5D2_DMA_OFFSET;
- 	isc->offsets.version = ISC_SAMA5D2_VERSION_OFFSET;
-+	isc->offsets.his_entry = ISC_SAMA5D2_HIS_ENTRY_OFFSET;
- 
- 	/* sama5d2-isc - 8 bits per beat */
- 	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
diff --git a/target/linux/at91/patches-5.10/173-media-atmel-atmel-isc-add-register-description-for-a.patch b/target/linux/at91/patches-5.10/173-media-atmel-atmel-isc-add-register-description-for-a.patch
deleted file mode 100644
index f701ede09c02..000000000000
--- a/target/linux/at91/patches-5.10/173-media-atmel-atmel-isc-add-register-description-for-a.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 87b581b1197df5f77bd65819d0428f2404c6b764 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:15 +0200
-Subject: [PATCH 173/247] media: atmel: atmel-isc: add register description for
- additional modules
-
-Add register description for additional pipeline modules: the
-Defective Pixel Correction (DPC) and the Vertical and Horizontal Scaler(VHXS)
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-regs.h | 67 +++++++++++++++++++
- 1 file changed, 67 insertions(+)
-
---- a/drivers/media/platform/atmel/atmel-isc-regs.h
-+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
-@@ -90,6 +90,46 @@
- #define ISC_INT_DDONE		BIT(8)
- #define ISC_INT_HISDONE		BIT(12)
- 
-+/* ISC DPC Control Register */
-+#define ISC_DPC_CTRL	0x40
-+
-+#define ISC_DPC_CTRL_DPCEN	BIT(0)
-+#define ISC_DPC_CTRL_GDCEN	BIT(1)
-+#define ISC_DPC_CTRL_BLCEN	BIT(2)
-+
-+/* ISC DPC Config Register */
-+#define ISC_DPC_CFG	0x44
-+
-+#define ISC_DPC_CFG_BAYSEL_SHIFT	0
-+
-+#define ISC_DPC_CFG_EITPOL		BIT(4)
-+
-+#define ISC_DPC_CFG_TA_ENABLE		BIT(14)
-+#define ISC_DPC_CFG_TC_ENABLE		BIT(13)
-+#define ISC_DPC_CFG_TM_ENABLE		BIT(12)
-+
-+#define ISC_DPC_CFG_RE_MODE		BIT(17)
-+
-+#define ISC_DPC_CFG_GDCCLP_SHIFT	20
-+#define ISC_DPC_CFG_GDCCLP_MASK		GENMASK(22, 20)
-+
-+#define ISC_DPC_CFG_BLOFF_SHIFT		24
-+#define ISC_DPC_CFG_BLOFF_MASK		GENMASK(31, 24)
-+
-+#define ISC_DPC_CFG_BAYCFG_SHIFT	0
-+#define ISC_DPC_CFG_BAYCFG_MASK		GENMASK(1, 0)
-+/* ISC DPC Threshold Median Register */
-+#define ISC_DPC_THRESHM	0x48
-+
-+/* ISC DPC Threshold Closest Register */
-+#define ISC_DPC_THRESHC	0x4C
-+
-+/* ISC DPC Threshold Average Register */
-+#define ISC_DPC_THRESHA	0x50
-+
-+/* ISC DPC STatus Register */
-+#define ISC_DPC_SR	0x54
-+
- /* ISC White Balance Control Register */
- #define ISC_WB_CTRL     0x00000058
- 
-@@ -153,6 +193,33 @@
- /* ISC_Gamma Correction Green Entry Register */
- #define ISC_GAM_RENTRY	0x00000298
- 
-+/* ISC VHXS Control Register */
-+#define ISC_VHXS_CTRL	0x398
-+
-+/* ISC VHXS Source Size Register */
-+#define ISC_VHXS_SS	0x39C
-+
-+/* ISC VHXS Destination Size Register */
-+#define ISC_VHXS_DS	0x3A0
-+
-+/* ISC Vertical Factor Register */
-+#define ISC_VXS_FACT	0x3a4
-+
-+/* ISC Horizontal Factor Register */
-+#define ISC_HXS_FACT	0x3a8
-+
-+/* ISC Vertical Config Register */
-+#define ISC_VXS_CFG	0x3ac
-+
-+/* ISC Horizontal Config Register */
-+#define ISC_HXS_CFG	0x3b0
-+
-+/* ISC Vertical Tap Register */
-+#define ISC_VXS_TAP	0x3b4
-+
-+/* ISC Horizontal Tap Register */
-+#define ISC_HXS_TAP	0x434
-+
- /* Offset for CSC register specific to sama5d2 product */
- #define ISC_SAMA5D2_CSC_OFFSET	0
- 
diff --git a/target/linux/at91/patches-5.10/174-media-atmel-atmel-isc-extend-pipeline-with-extra-mod.patch b/target/linux/at91/patches-5.10/174-media-atmel-atmel-isc-extend-pipeline-with-extra-mod.patch
deleted file mode 100644
index 7cb5233c2ee6..000000000000
--- a/target/linux/at91/patches-5.10/174-media-atmel-atmel-isc-extend-pipeline-with-extra-mod.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From 58a6cc3c7eecd16208cd16b92b4eaf8385e69696 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:16 +0200
-Subject: [PATCH 174/247] media: atmel: atmel-isc: extend pipeline with extra
- modules
-
-Newer ISC pipelines have the additional modules of
-Defective Pixel Correction -> DPC itself,
-Defective Pixel Correction -> Green Disparity Correction (DPC_GDC)
-Defective Pixel Correction -> Black Level Correction (DPC_BLC)
-Vertical and Horizontal Scaler -> VHXS
-
-Some products have this full pipeline (sama7g5), other products do not (sama5d2)
-
-Add the modules to the isc base, and also extend the register range to include
-the modules.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c | 11 ++++++--
- drivers/media/platform/atmel/atmel-isc.h      | 28 +++++++++++--------
- 2 files changed, 25 insertions(+), 14 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -2324,8 +2324,14 @@ int isc_pipeline_init(struct isc_device
- 	struct regmap_field *regs;
- 	unsigned int i;
- 
--	/* WB-->CFA-->CC-->GAM-->CSC-->CBC-->SUB422-->SUB420 */
-+	/*
-+	 * DPCEN-->GDCEN-->BLCEN-->WB-->CFA-->CC-->
-+	 * GAM-->VHXS-->CSC-->CBC-->SUB422-->SUB420
-+	 */
- 	const struct reg_field regfields[ISC_PIPE_LINE_NODE_NUM] = {
-+		REG_FIELD(ISC_DPC_CTRL, 0, 0),
-+		REG_FIELD(ISC_DPC_CTRL, 1, 1),
-+		REG_FIELD(ISC_DPC_CTRL, 2, 2),
- 		REG_FIELD(ISC_WB_CTRL, 0, 0),
- 		REG_FIELD(ISC_CFA_CTRL, 0, 0),
- 		REG_FIELD(ISC_CC_CTRL, 0, 0),
-@@ -2333,6 +2339,7 @@ int isc_pipeline_init(struct isc_device
- 		REG_FIELD(ISC_GAM_CTRL, 1, 1),
- 		REG_FIELD(ISC_GAM_CTRL, 2, 2),
- 		REG_FIELD(ISC_GAM_CTRL, 3, 3),
-+		REG_FIELD(ISC_VHXS_CTRL, 0, 0),
- 		REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0),
- 		REG_FIELD(ISC_CBC_CTRL + isc->offsets.cbc, 0, 0),
- 		REG_FIELD(ISC_SUB422_CTRL + isc->offsets.sub422, 0, 0),
-@@ -2351,7 +2358,7 @@ int isc_pipeline_init(struct isc_device
- }
- 
- /* regmap configuration */
--#define ATMEL_ISC_REG_MAX    0xbfc
-+#define ATMEL_ISC_REG_MAX    0xd5c
- const struct regmap_config isc_regmap_config = {
- 	.reg_bits       = 32,
- 	.reg_stride     = 4,
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -67,17 +67,21 @@ struct isc_format {
- };
- 
- /* Pipeline bitmap */
--#define WB_ENABLE	BIT(0)
--#define CFA_ENABLE	BIT(1)
--#define CC_ENABLE	BIT(2)
--#define GAM_ENABLE	BIT(3)
--#define GAM_BENABLE	BIT(4)
--#define GAM_GENABLE	BIT(5)
--#define GAM_RENABLE	BIT(6)
--#define CSC_ENABLE	BIT(7)
--#define CBC_ENABLE	BIT(8)
--#define SUB422_ENABLE	BIT(9)
--#define SUB420_ENABLE	BIT(10)
-+#define DPC_DPCENABLE	BIT(0)
-+#define DPC_GDCENABLE	BIT(1)
-+#define DPC_BLCENABLE	BIT(2)
-+#define WB_ENABLE	BIT(3)
-+#define CFA_ENABLE	BIT(4)
-+#define CC_ENABLE	BIT(5)
-+#define GAM_ENABLE	BIT(6)
-+#define GAM_BENABLE	BIT(7)
-+#define GAM_GENABLE	BIT(8)
-+#define GAM_RENABLE	BIT(9)
-+#define VHXS_ENABLE	BIT(10)
-+#define CSC_ENABLE	BIT(11)
-+#define CBC_ENABLE	BIT(12)
-+#define SUB422_ENABLE	BIT(13)
-+#define SUB420_ENABLE	BIT(14)
- 
- #define GAM_ENABLES	(GAM_RENABLE | GAM_GENABLE | GAM_BENABLE | GAM_ENABLE)
- 
-@@ -141,7 +145,7 @@ struct isc_ctrls {
- 	u32 hist_minmax[HIST_BAYER][2];
- };
- 
--#define ISC_PIPE_LINE_NODE_NUM	11
-+#define ISC_PIPE_LINE_NODE_NUM	15
- 
- /*
-  * struct isc_reg_offsets - ISC device register offsets
diff --git a/target/linux/at91/patches-5.10/175-media-atmel-atmel-isc-add-CC-initialization-function.patch b/target/linux/at91/patches-5.10/175-media-atmel-atmel-isc-add-CC-initialization-function.patch
deleted file mode 100644
index 69491d7d1355..000000000000
--- a/target/linux/at91/patches-5.10/175-media-atmel-atmel-isc-add-CC-initialization-function.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 0db91d2a803221c313c9f2cd1d71050d7c5a7b5b Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:17 +0200
-Subject: [PATCH 175/247] media: atmel: atmel-isc: add CC initialization
- function
-
-The CC submodule is a part of the atmel-isc pipeline, and stands for
-Color Correction. It is used to apply gains and offsets to the
-chroma (U, V) components of the YUV elements.
-Implement the CC submodule initialization, as a product
-specific function, which currently configures the neutral point in color
-correction.
-
-[hverkuil: made isc_sama5d2_config_cc static]
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    |  1 +
- drivers/media/platform/atmel/atmel-isc.h         |  3 +++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 14 ++++++++++++++
- 3 files changed, 18 insertions(+)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -661,6 +661,7 @@ static void isc_set_pipeline(struct isc_
- 
- 	isc->config_csc(isc);
- 	isc->config_cbc(isc);
-+	isc->config_cc(isc);
- }
- 
- static int isc_update_profile(struct isc_device *isc)
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -224,6 +224,8 @@ struct isc_reg_offsets {
-  *			specific CSC module
-  * @config_cbc:		pointer to a function that initializes product
-  *			specific CBC module
-+ * @config_cc:		pointer to a function that initializes product
-+ *			specific CC module
-  *
-  * @offsets:		struct holding the product specific register offsets
-  */
-@@ -297,6 +299,7 @@ struct isc_device {
- 	struct {
- 		void (*config_csc)(struct isc_device *isc);
- 		void (*config_cbc)(struct isc_device *isc);
-+		void (*config_cc)(struct isc_device *isc);
- 	};
- 
- 	struct isc_reg_offsets		offsets;
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -83,6 +83,19 @@ static void isc_sama5d2_config_cbc(struc
- 		     isc->ctrls.contrast);
- }
- 
-+static void isc_sama5d2_config_cc(struct isc_device *isc)
-+{
-+	struct regmap *regmap = isc->regmap;
-+
-+	/* Configure each register at the neutral fixed point 1.0 or 0.0 */
-+	regmap_write(regmap, ISC_CC_RR_RG, (1 << 8));
-+	regmap_write(regmap, ISC_CC_RB_OR, 0);
-+	regmap_write(regmap, ISC_CC_GR_GG, (1 << 8) << 16);
-+	regmap_write(regmap, ISC_CC_GB_OG, 0);
-+	regmap_write(regmap, ISC_CC_BR_BG, 0);
-+	regmap_write(regmap, ISC_CC_BB_OB, (1 << 8));
-+}
-+
- /* Gamma table with gamma 1/2.2 */
- static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
- 	/* 0 --> gamma 1/1.8 */
-@@ -251,6 +264,7 @@ static int atmel_isc_probe(struct platfo
- 
- 	isc->config_csc = isc_sama5d2_config_csc;
- 	isc->config_cbc = isc_sama5d2_config_cbc;
-+	isc->config_cc = isc_sama5d2_config_cc;
- 
- 	isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
- 	isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET;
diff --git a/target/linux/at91/patches-5.10/176-media-atmel-atmel-isc-create-product-specific-v4l2-c.patch b/target/linux/at91/patches-5.10/176-media-atmel-atmel-isc-create-product-specific-v4l2-c.patch
deleted file mode 100644
index 35c839692c61..000000000000
--- a/target/linux/at91/patches-5.10/176-media-atmel-atmel-isc-create-product-specific-v4l2-c.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 0a75c502eac4f2ef71b6c3e0b3a01db1b3c37ba9 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:18 +0200
-Subject: [PATCH 176/247] media: atmel: atmel-isc: create product specific v4l2
- controls config
-
-Create product specific callback for initializing v4l2 controls.
-Call this from v4l2 controls init function.
-
-[hverkuil: made isc_sama5d2_config_ctrls static]
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    |  5 +++--
- drivers/media/platform/atmel/atmel-isc.h         |  5 +++++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 12 ++++++++++++
- 3 files changed, 20 insertions(+), 2 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -2051,11 +2051,12 @@ static int isc_ctrl_init(struct isc_devi
- 	if (ret < 0)
- 		return ret;
- 
-+	/* Initialize product specific controls. For example, contrast */
-+	isc->config_ctrls(isc, ops);
-+
- 	ctrls->brightness = 0;
--	ctrls->contrast = 256;
- 
- 	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -1024, 1023, 1, 0);
--	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256);
- 	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAMMA, 0, isc->gamma_max, 1,
- 			  isc->gamma_max);
- 	isc->awb_ctrl = v4l2_ctrl_new_std(hdl, &isc_awb_ops,
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -226,6 +226,8 @@ struct isc_reg_offsets {
-  *			specific CBC module
-  * @config_cc:		pointer to a function that initializes product
-  *			specific CC module
-+ * @config_ctrls:	pointer to a functoin that initializes product
-+ *			specific v4l2 controls.
-  *
-  * @offsets:		struct holding the product specific register offsets
-  */
-@@ -300,6 +302,9 @@ struct isc_device {
- 		void (*config_csc)(struct isc_device *isc);
- 		void (*config_cbc)(struct isc_device *isc);
- 		void (*config_cc)(struct isc_device *isc);
-+
-+		void (*config_ctrls)(struct isc_device *isc,
-+				     const struct v4l2_ctrl_ops *ops);
- 	};
- 
- 	struct isc_reg_offsets		offsets;
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -96,6 +96,17 @@ static void isc_sama5d2_config_cc(struct
- 	regmap_write(regmap, ISC_CC_BB_OB, (1 << 8));
- }
- 
-+static void isc_sama5d2_config_ctrls(struct isc_device *isc,
-+				     const struct v4l2_ctrl_ops *ops)
-+{
-+	struct isc_ctrls *ctrls = &isc->ctrls;
-+	struct v4l2_ctrl_handler *hdl = &ctrls->handler;
-+
-+	ctrls->contrast = 256;
-+
-+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256);
-+}
-+
- /* Gamma table with gamma 1/2.2 */
- static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
- 	/* 0 --> gamma 1/1.8 */
-@@ -265,6 +276,7 @@ static int atmel_isc_probe(struct platfo
- 	isc->config_csc = isc_sama5d2_config_csc;
- 	isc->config_cbc = isc_sama5d2_config_cbc;
- 	isc->config_cc = isc_sama5d2_config_cc;
-+	isc->config_ctrls = isc_sama5d2_config_ctrls;
- 
- 	isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
- 	isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET;
diff --git a/target/linux/at91/patches-5.10/177-media-atmel-atmel-isc-create-callback-for-DPC-submod.patch b/target/linux/at91/patches-5.10/177-media-atmel-atmel-isc-create-callback-for-DPC-submod.patch
deleted file mode 100644
index ef396f84cf32..000000000000
--- a/target/linux/at91/patches-5.10/177-media-atmel-atmel-isc-create-callback-for-DPC-submod.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From d53eb90044c19ba22b51978fcb007d9b5200b83a Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:19 +0200
-Subject: [PATCH 177/247] media: atmel: atmel-isc: create callback for DPC
- submodule product specific
-
-The DPC submodule is a part of the atmel-isc pipeline, and stands for
-Defective Pixel Correction. Its purpose is to detect defective pixels and
-correct them if possible with the help of adjacent pixels.
-Create a product specific callback for initializing the DPC submodule
-of the pipeline.
-For sama5d2 product, this module does not exist, thus this function is a noop.
-
-[hverkuil: made isc_sama5d2_config_dpc static]
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    | 1 +
- drivers/media/platform/atmel/atmel-isc.h         | 3 +++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 6 ++++++
- 3 files changed, 10 insertions(+)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -659,6 +659,7 @@ static void isc_set_pipeline(struct isc_
- 	regmap_bulk_write(regmap, ISC_GAM_GENTRY, gamma, GAMMA_ENTRIES);
- 	regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES);
- 
-+	isc->config_dpc(isc);
- 	isc->config_csc(isc);
- 	isc->config_cbc(isc);
- 	isc->config_cc(isc);
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -220,6 +220,8 @@ struct isc_reg_offsets {
-  * @max_width:		maximum frame width, dependent on the internal RAM
-  * @max_height:		maximum frame height, dependent on the internal RAM
-  *
-+ * @config_dpc:		pointer to a function that initializes product
-+ *			specific DPC module
-  * @config_csc:		pointer to a function that initializes product
-  *			specific CSC module
-  * @config_cbc:		pointer to a function that initializes product
-@@ -299,6 +301,7 @@ struct isc_device {
- 	u32		max_height;
- 
- 	struct {
-+		void (*config_dpc)(struct isc_device *isc);
- 		void (*config_csc)(struct isc_device *isc);
- 		void (*config_cbc)(struct isc_device *isc);
- 		void (*config_cc)(struct isc_device *isc);
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -107,6 +107,11 @@ static void isc_sama5d2_config_ctrls(str
- 	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256);
- }
- 
-+static void isc_sama5d2_config_dpc(struct isc_device *isc)
-+{
-+	/* This module is not present on sama5d2 pipeline */
-+}
-+
- /* Gamma table with gamma 1/2.2 */
- static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
- 	/* 0 --> gamma 1/1.8 */
-@@ -273,6 +278,7 @@ static int atmel_isc_probe(struct platfo
- 	isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH;
- 	isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT;
- 
-+	isc->config_dpc = isc_sama5d2_config_dpc;
- 	isc->config_csc = isc_sama5d2_config_csc;
- 	isc->config_cbc = isc_sama5d2_config_cbc;
- 	isc->config_cc = isc_sama5d2_config_cc;
diff --git a/target/linux/at91/patches-5.10/178-media-atmel-atmel-isc-create-callback-for-GAM-submod.patch b/target/linux/at91/patches-5.10/178-media-atmel-atmel-isc-create-callback-for-GAM-submod.patch
deleted file mode 100644
index a219704b3103..000000000000
--- a/target/linux/at91/patches-5.10/178-media-atmel-atmel-isc-create-callback-for-GAM-submod.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 96936a6753a13dea5a8f66de949e6594dd82ce22 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:20 +0200
-Subject: [PATCH 178/247] media: atmel: atmel-isc: create callback for GAM
- submodule product specific
-
-The GAM submodule is a part of the atmel-isc pipeline, and stands for
-Gamma Correction. It is used to apply the gamma curve to the incoming pixels.
-Create a product specific callback for initializing the GAM submodule
-of the pipeline.
-For sama5d2 product, there is no special configuration at this moment,
-thus this function is a noop.
-
-[hverkuil: made isc_sama5d2_config_gam static]
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    | 1 +
- drivers/media/platform/atmel/atmel-isc.h         | 3 +++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 6 ++++++
- 3 files changed, 10 insertions(+)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -663,6 +663,7 @@ static void isc_set_pipeline(struct isc_
- 	isc->config_csc(isc);
- 	isc->config_cbc(isc);
- 	isc->config_cc(isc);
-+	isc->config_gam(isc);
- }
- 
- static int isc_update_profile(struct isc_device *isc)
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -228,6 +228,8 @@ struct isc_reg_offsets {
-  *			specific CBC module
-  * @config_cc:		pointer to a function that initializes product
-  *			specific CC module
-+ * @config_gam:		pointer to a function that initializes product
-+ *			specific GAMMA module
-  * @config_ctrls:	pointer to a functoin that initializes product
-  *			specific v4l2 controls.
-  *
-@@ -305,6 +307,7 @@ struct isc_device {
- 		void (*config_csc)(struct isc_device *isc);
- 		void (*config_cbc)(struct isc_device *isc);
- 		void (*config_cc)(struct isc_device *isc);
-+		void (*config_gam)(struct isc_device *isc);
- 
- 		void (*config_ctrls)(struct isc_device *isc,
- 				     const struct v4l2_ctrl_ops *ops);
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -112,6 +112,11 @@ static void isc_sama5d2_config_dpc(struc
- 	/* This module is not present on sama5d2 pipeline */
- }
- 
-+static void isc_sama5d2_config_gam(struct isc_device *isc)
-+{
-+	/* No specific gamma configuration */
-+}
-+
- /* Gamma table with gamma 1/2.2 */
- static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
- 	/* 0 --> gamma 1/1.8 */
-@@ -282,6 +287,7 @@ static int atmel_isc_probe(struct platfo
- 	isc->config_csc = isc_sama5d2_config_csc;
- 	isc->config_cbc = isc_sama5d2_config_cbc;
- 	isc->config_cc = isc_sama5d2_config_cc;
-+	isc->config_gam = isc_sama5d2_config_gam;
- 	isc->config_ctrls = isc_sama5d2_config_ctrls;
- 
- 	isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
diff --git a/target/linux/at91/patches-5.10/179-media-atmel-atmel-isc-create-callback-for-RLP-submod.patch b/target/linux/at91/patches-5.10/179-media-atmel-atmel-isc-create-callback-for-RLP-submod.patch
deleted file mode 100644
index 8442925a7ebf..000000000000
--- a/target/linux/at91/patches-5.10/179-media-atmel-atmel-isc-create-callback-for-RLP-submod.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From ece1d7059731e31875e6eb464da4fb4a16465305 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:21 +0200
-Subject: [PATCH 179/247] media: atmel: atmel-isc: create callback for RLP
- submodule product specific
-
-The RLP submodule is a part of the atmel-isc pipeline, and stands for
-Rounding,Limiting and Packaging. It used to extract specific data from the
-ISC pipeline. For example if we want to output greyscale 8 bit, we would
-use limiting to 8 bits, and packaging to Luma component only.
-
-Create a product specific callback for initializing the RLP submodule
-of the pipeline
-
-[hverkuil: made isc_sama5d2_config_rlp static]
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    |  6 ++----
- drivers/media/platform/atmel/atmel-isc.h         |  3 +++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 10 ++++++++++
- 3 files changed, 15 insertions(+), 4 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -719,11 +719,10 @@ static void isc_set_histogram(struct isc
- static int isc_configure(struct isc_device *isc)
- {
- 	struct regmap *regmap = isc->regmap;
--	u32 pfe_cfg0, rlp_mode, dcfg, mask, pipeline;
-+	u32 pfe_cfg0, dcfg, mask, pipeline;
- 	struct isc_subdev_entity *subdev = isc->current_subdev;
- 
- 	pfe_cfg0 = isc->config.sd_format->pfe_cfg0_bps;
--	rlp_mode = isc->config.rlp_cfg_mode;
- 	pipeline = isc->config.bits_pipeline;
- 
- 	dcfg = isc->config.dcfg_imode | isc->dcfg;
-@@ -736,8 +735,7 @@ static int isc_configure(struct isc_devi
- 
- 	regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0);
- 
--	regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
--			   ISC_RLP_CFG_MODE_MASK, rlp_mode);
-+	isc->config_rlp(isc);
- 
- 	regmap_write(regmap, ISC_DCFG + isc->offsets.dma, dcfg);
- 
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -230,6 +230,8 @@ struct isc_reg_offsets {
-  *			specific CC module
-  * @config_gam:		pointer to a function that initializes product
-  *			specific GAMMA module
-+ * @config_rlp:		pointer to a function that initializes product
-+ *			specific RLP module
-  * @config_ctrls:	pointer to a functoin that initializes product
-  *			specific v4l2 controls.
-  *
-@@ -308,6 +310,7 @@ struct isc_device {
- 		void (*config_cbc)(struct isc_device *isc);
- 		void (*config_cc)(struct isc_device *isc);
- 		void (*config_gam)(struct isc_device *isc);
-+		void (*config_rlp)(struct isc_device *isc);
- 
- 		void (*config_ctrls)(struct isc_device *isc,
- 				     const struct v4l2_ctrl_ops *ops);
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -117,6 +117,15 @@ static void isc_sama5d2_config_gam(struc
- 	/* No specific gamma configuration */
- }
- 
-+static void isc_sama5d2_config_rlp(struct isc_device *isc)
-+{
-+	struct regmap *regmap = isc->regmap;
-+	u32 rlp_mode = isc->config.rlp_cfg_mode;
-+
-+	regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
-+			   ISC_RLP_CFG_MODE_MASK, rlp_mode);
-+}
-+
- /* Gamma table with gamma 1/2.2 */
- static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
- 	/* 0 --> gamma 1/1.8 */
-@@ -288,6 +297,7 @@ static int atmel_isc_probe(struct platfo
- 	isc->config_cbc = isc_sama5d2_config_cbc;
- 	isc->config_cc = isc_sama5d2_config_cc;
- 	isc->config_gam = isc_sama5d2_config_gam;
-+	isc->config_rlp = isc_sama5d2_config_rlp;
- 	isc->config_ctrls = isc_sama5d2_config_ctrls;
- 
- 	isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
diff --git a/target/linux/at91/patches-5.10/180-media-atmel-atmel-isc-move-the-formats-list-into-pro.patch b/target/linux/at91/patches-5.10/180-media-atmel-atmel-isc-move-the-formats-list-into-pro.patch
deleted file mode 100644
index 1c64cfca2e89..000000000000
--- a/target/linux/at91/patches-5.10/180-media-atmel-atmel-isc-move-the-formats-list-into-pro.patch
+++ /dev/null
@@ -1,440 +0,0 @@
-From dda51aa2e4524914d25022864466fa9d8713a5e9 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:22 +0200
-Subject: [PATCH 180/247] media: atmel: atmel-isc: move the formats list into
- product specific code
-
-The list of input and output formats has to be product specific.
-Move this list into the product specific code.
-Have pointers to these arrays inside the device struct.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c | 167 ++----------------
- drivers/media/platform/atmel/atmel-isc.h      |  12 +-
- .../media/platform/atmel/atmel-sama5d2-isc.c  | 136 ++++++++++++++
- 3 files changed, 165 insertions(+), 150 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -45,137 +45,6 @@ module_param(sensor_preferred, uint, 064
- MODULE_PARM_DESC(sensor_preferred,
- 		 "Sensor is preferred to output the specified format (1-on 0-off), default 1");
- 
--/* This is a list of the formats that the ISC can *output* */
--const struct isc_format controller_formats[] = {
--	{
--		.fourcc		= V4L2_PIX_FMT_ARGB444,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_ARGB555,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_RGB565,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_ABGR32,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_XBGR32,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_YUV420,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_YUYV,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_YUV422P,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_GREY,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_Y10,
--	},
--};
--
--/* This is a list of formats that the ISC can receive as *input* */
--struct isc_format formats_list[] = {
--	{
--		.fourcc		= V4L2_PIX_FMT_SBGGR8,
--		.mbus_code	= MEDIA_BUS_FMT_SBGGR8_1X8,
--		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
--		.cfa_baycfg	= ISC_BAY_CFG_BGBG,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_SGBRG8,
--		.mbus_code	= MEDIA_BUS_FMT_SGBRG8_1X8,
--		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
--		.cfa_baycfg	= ISC_BAY_CFG_GBGB,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_SGRBG8,
--		.mbus_code	= MEDIA_BUS_FMT_SGRBG8_1X8,
--		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
--		.cfa_baycfg	= ISC_BAY_CFG_GRGR,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_SRGGB8,
--		.mbus_code	= MEDIA_BUS_FMT_SRGGB8_1X8,
--		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
--		.cfa_baycfg	= ISC_BAY_CFG_RGRG,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_SBGGR10,
--		.mbus_code	= MEDIA_BUS_FMT_SBGGR10_1X10,
--		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
--		.cfa_baycfg	= ISC_BAY_CFG_RGRG,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_SGBRG10,
--		.mbus_code	= MEDIA_BUS_FMT_SGBRG10_1X10,
--		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
--		.cfa_baycfg	= ISC_BAY_CFG_GBGB,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_SGRBG10,
--		.mbus_code	= MEDIA_BUS_FMT_SGRBG10_1X10,
--		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
--		.cfa_baycfg	= ISC_BAY_CFG_GRGR,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_SRGGB10,
--		.mbus_code	= MEDIA_BUS_FMT_SRGGB10_1X10,
--		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
--		.cfa_baycfg	= ISC_BAY_CFG_RGRG,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_SBGGR12,
--		.mbus_code	= MEDIA_BUS_FMT_SBGGR12_1X12,
--		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TWELVE,
--		.cfa_baycfg	= ISC_BAY_CFG_BGBG,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_SGBRG12,
--		.mbus_code	= MEDIA_BUS_FMT_SGBRG12_1X12,
--		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TWELVE,
--		.cfa_baycfg	= ISC_BAY_CFG_GBGB,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_SGRBG12,
--		.mbus_code	= MEDIA_BUS_FMT_SGRBG12_1X12,
--		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TWELVE,
--		.cfa_baycfg	= ISC_BAY_CFG_GRGR,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_SRGGB12,
--		.mbus_code	= MEDIA_BUS_FMT_SRGGB12_1X12,
--		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TWELVE,
--		.cfa_baycfg	= ISC_BAY_CFG_RGRG,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_GREY,
--		.mbus_code	= MEDIA_BUS_FMT_Y8_1X8,
--		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_YUYV,
--		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
--		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_RGB565,
--		.mbus_code	= MEDIA_BUS_FMT_RGB565_2X8_LE,
--		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
--	},
--	{
--		.fourcc		= V4L2_PIX_FMT_Y10,
--		.mbus_code	= MEDIA_BUS_FMT_Y10_1X10,
--		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
--	},
--
--};
--
- #define ISC_IS_FORMAT_RAW(mbus_code) \
- 	(((mbus_code) & 0xf000) == 0x3000)
- 
-@@ -919,24 +788,25 @@ static int isc_querycap(struct file *fil
- static int isc_enum_fmt_vid_cap(struct file *file, void *priv,
- 				 struct v4l2_fmtdesc *f)
- {
-+	struct isc_device *isc = video_drvdata(file);
- 	u32 index = f->index;
- 	u32 i, supported_index;
- 
--	if (index < ARRAY_SIZE(controller_formats)) {
--		f->pixelformat = controller_formats[index].fourcc;
-+	if (index < isc->controller_formats_size) {
-+		f->pixelformat = isc->controller_formats[index].fourcc;
- 		return 0;
- 	}
- 
--	index -= ARRAY_SIZE(controller_formats);
-+	index -= isc->controller_formats_size;
- 
- 	supported_index = 0;
- 
--	for (i = 0; i < ARRAY_SIZE(formats_list); i++) {
--		if (!ISC_IS_FORMAT_RAW(formats_list[i].mbus_code) ||
--		    !formats_list[i].sd_support)
-+	for (i = 0; i < isc->formats_list_size; i++) {
-+		if (!ISC_IS_FORMAT_RAW(isc->formats_list[i].mbus_code) ||
-+		    !isc->formats_list[i].sd_support)
- 			continue;
- 		if (supported_index == index) {
--			f->pixelformat = formats_list[i].fourcc;
-+			f->pixelformat = isc->formats_list[i].fourcc;
- 			return 0;
- 		}
- 		supported_index++;
-@@ -1477,8 +1347,8 @@ static int isc_enum_framesizes(struct fi
- 		if (isc->user_formats[i]->fourcc == fsize->pixel_format)
- 			ret = 0;
- 
--	for (i = 0; i < ARRAY_SIZE(controller_formats); i++)
--		if (controller_formats[i].fourcc == fsize->pixel_format)
-+	for (i = 0; i < isc->controller_formats_size; i++)
-+		if (isc->controller_formats[i].fourcc == fsize->pixel_format)
- 			ret = 0;
- 
- 	if (ret)
-@@ -1514,8 +1384,8 @@ static int isc_enum_frameintervals(struc
- 		if (isc->user_formats[i]->fourcc == fival->pixel_format)
- 			ret = 0;
- 
--	for (i = 0; i < ARRAY_SIZE(controller_formats); i++)
--		if (controller_formats[i].fourcc == fival->pixel_format)
-+	for (i = 0; i < isc->controller_formats_size; i++)
-+		if (isc->controller_formats[i].fourcc == fival->pixel_format)
- 			ret = 0;
- 
- 	if (ret)
-@@ -2126,12 +1996,13 @@ static void isc_async_unbind(struct v4l2
- 	v4l2_ctrl_handler_free(&isc->ctrls.handler);
- }
- 
--static struct isc_format *find_format_by_code(unsigned int code, int *index)
-+static struct isc_format *find_format_by_code(struct isc_device *isc,
-+					      unsigned int code, int *index)
- {
--	struct isc_format *fmt = &formats_list[0];
-+	struct isc_format *fmt = &isc->formats_list[0];
- 	unsigned int i;
- 
--	for (i = 0; i < ARRAY_SIZE(formats_list); i++) {
-+	for (i = 0; i < isc->formats_list_size; i++) {
- 		if (fmt->mbus_code == code) {
- 			*index = i;
- 			return fmt;
-@@ -2148,7 +2019,7 @@ static int isc_formats_init(struct isc_d
- 	struct isc_format *fmt;
- 	struct v4l2_subdev *subdev = isc->current_subdev->sd;
- 	unsigned int num_fmts, i, j;
--	u32 list_size = ARRAY_SIZE(formats_list);
-+	u32 list_size = isc->formats_list_size;
- 	struct v4l2_subdev_mbus_code_enum mbus_code = {
- 		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
- 	};
-@@ -2158,7 +2029,7 @@ static int isc_formats_init(struct isc_d
- 	       NULL, &mbus_code)) {
- 		mbus_code.index++;
- 
--		fmt = find_format_by_code(mbus_code.code, &i);
-+		fmt = find_format_by_code(isc, mbus_code.code, &i);
- 		if (!fmt) {
- 			v4l2_warn(&isc->v4l2_dev, "Mbus code %x not supported\n",
- 				  mbus_code.code);
-@@ -2179,7 +2050,7 @@ static int isc_formats_init(struct isc_d
- 	if (!isc->user_formats)
- 		return -ENOMEM;
- 
--	fmt = &formats_list[0];
-+	fmt = &isc->formats_list[0];
- 	for (i = 0, j = 0; i < list_size; i++) {
- 		if (fmt->sd_support)
- 			isc->user_formats[j++] = fmt;
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -236,6 +236,12 @@ struct isc_reg_offsets {
-  *			specific v4l2 controls.
-  *
-  * @offsets:		struct holding the product specific register offsets
-+ * @controller_formats:	pointer to the array of possible formats that the
-+ *			controller can output
-+ * @formats_list:	pointer to the array of possible formats that can
-+ *			be used as an input to the controller
-+ * @controller_formats_size:	size of controller_formats array
-+ * @formats_list_size:	size of formats_list array
-  */
- struct isc_device {
- 	struct regmap		*regmap;
-@@ -317,10 +323,12 @@ struct isc_device {
- 	};
- 
- 	struct isc_reg_offsets		offsets;
-+	const struct isc_format		*controller_formats;
-+	struct isc_format		*formats_list;
-+	u32				controller_formats_size;
-+	u32				formats_list_size;
- };
- 
--extern struct isc_format formats_list[];
--extern const struct isc_format controller_formats[];
- extern const struct regmap_config isc_regmap_config;
- extern const struct v4l2_async_notifier_operations isc_async_ops;
- 
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -54,6 +54,137 @@
- 
- #define ISC_CLK_MAX_DIV		255
- 
-+/* This is a list of the formats that the ISC can *output* */
-+static const struct isc_format sama5d2_controller_formats[] = {
-+	{
-+		.fourcc		= V4L2_PIX_FMT_ARGB444,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_ARGB555,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_RGB565,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_ABGR32,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_XBGR32,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_YUV420,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_YUYV,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_YUV422P,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_GREY,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_Y10,
-+	},
-+};
-+
-+/* This is a list of formats that the ISC can receive as *input* */
-+static struct isc_format sama5d2_formats_list[] = {
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SBGGR8,
-+		.mbus_code	= MEDIA_BUS_FMT_SBGGR8_1X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+		.cfa_baycfg	= ISC_BAY_CFG_BGBG,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SGBRG8,
-+		.mbus_code	= MEDIA_BUS_FMT_SGBRG8_1X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+		.cfa_baycfg	= ISC_BAY_CFG_GBGB,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SGRBG8,
-+		.mbus_code	= MEDIA_BUS_FMT_SGRBG8_1X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+		.cfa_baycfg	= ISC_BAY_CFG_GRGR,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SRGGB8,
-+		.mbus_code	= MEDIA_BUS_FMT_SRGGB8_1X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+		.cfa_baycfg	= ISC_BAY_CFG_RGRG,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SBGGR10,
-+		.mbus_code	= MEDIA_BUS_FMT_SBGGR10_1X10,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
-+		.cfa_baycfg	= ISC_BAY_CFG_RGRG,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SGBRG10,
-+		.mbus_code	= MEDIA_BUS_FMT_SGBRG10_1X10,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
-+		.cfa_baycfg	= ISC_BAY_CFG_GBGB,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SGRBG10,
-+		.mbus_code	= MEDIA_BUS_FMT_SGRBG10_1X10,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
-+		.cfa_baycfg	= ISC_BAY_CFG_GRGR,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SRGGB10,
-+		.mbus_code	= MEDIA_BUS_FMT_SRGGB10_1X10,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
-+		.cfa_baycfg	= ISC_BAY_CFG_RGRG,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SBGGR12,
-+		.mbus_code	= MEDIA_BUS_FMT_SBGGR12_1X12,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TWELVE,
-+		.cfa_baycfg	= ISC_BAY_CFG_BGBG,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SGBRG12,
-+		.mbus_code	= MEDIA_BUS_FMT_SGBRG12_1X12,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TWELVE,
-+		.cfa_baycfg	= ISC_BAY_CFG_GBGB,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SGRBG12,
-+		.mbus_code	= MEDIA_BUS_FMT_SGRBG12_1X12,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TWELVE,
-+		.cfa_baycfg	= ISC_BAY_CFG_GRGR,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SRGGB12,
-+		.mbus_code	= MEDIA_BUS_FMT_SRGGB12_1X12,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TWELVE,
-+		.cfa_baycfg	= ISC_BAY_CFG_RGRG,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_GREY,
-+		.mbus_code	= MEDIA_BUS_FMT_Y8_1X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_YUYV,
-+		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_RGB565,
-+		.mbus_code	= MEDIA_BUS_FMT_RGB565_2X8_LE,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_Y10,
-+		.mbus_code	= MEDIA_BUS_FMT_Y10_1X10,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
-+	},
-+
-+};
-+
- static void isc_sama5d2_config_csc(struct isc_device *isc)
- {
- 	struct regmap *regmap = isc->regmap;
-@@ -310,6 +441,11 @@ static int atmel_isc_probe(struct platfo
- 	isc->offsets.version = ISC_SAMA5D2_VERSION_OFFSET;
- 	isc->offsets.his_entry = ISC_SAMA5D2_HIS_ENTRY_OFFSET;
- 
-+	isc->controller_formats = sama5d2_controller_formats;
-+	isc->controller_formats_size = ARRAY_SIZE(sama5d2_controller_formats);
-+	isc->formats_list = sama5d2_formats_list;
-+	isc->formats_list_size = ARRAY_SIZE(sama5d2_formats_list);
-+
- 	/* sama5d2-isc - 8 bits per beat */
- 	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
- 
diff --git a/target/linux/at91/patches-5.10/181-media-atmel-atmel-isc-create-an-adapt-pipeline-callb.patch b/target/linux/at91/patches-5.10/181-media-atmel-atmel-isc-create-an-adapt-pipeline-callb.patch
deleted file mode 100644
index 042fc609fede..000000000000
--- a/target/linux/at91/patches-5.10/181-media-atmel-atmel-isc-create-an-adapt-pipeline-callb.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From 8601f1fc0a9a22788bfa6369fbbf83b3828a5b42 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:23 +0200
-Subject: [PATCH 181/247] media: atmel: atmel-isc: create an adapt pipeline
- callback for product specific
-
-Once the pipeline is set in the base code, create a callback that will adapt
-the ISC pipeline to each product.
-Create the adapt_pipeline callback that will be used in this fashion.
-
-[hverkuil: made isc_sama5d2_adapt_pipeline static]
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c    |  4 ++++
- drivers/media/platform/atmel/atmel-isc.h         |  5 +++++
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 11 +++++++++++
- 3 files changed, 20 insertions(+)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -1059,6 +1059,10 @@ static int isc_try_configure_pipeline(st
- 	default:
- 		isc->try_config.bits_pipeline = 0x0;
- 	}
-+
-+	/* Tune the pipeline to product specific */
-+	isc->adapt_pipeline(isc);
-+
- 	return 0;
- }
- 
---- a/drivers/media/platform/atmel/atmel-isc.h
-+++ b/drivers/media/platform/atmel/atmel-isc.h
-@@ -235,6 +235,9 @@ struct isc_reg_offsets {
-  * @config_ctrls:	pointer to a functoin that initializes product
-  *			specific v4l2 controls.
-  *
-+ * @adapt_pipeline:	pointer to a function that adapts the pipeline bits
-+ *			to the product specific pipeline
-+ *
-  * @offsets:		struct holding the product specific register offsets
-  * @controller_formats:	pointer to the array of possible formats that the
-  *			controller can output
-@@ -320,6 +323,8 @@ struct isc_device {
- 
- 		void (*config_ctrls)(struct isc_device *isc,
- 				     const struct v4l2_ctrl_ops *ops);
-+
-+		void (*adapt_pipeline)(struct isc_device *isc);
- 	};
- 
- 	struct isc_reg_offsets		offsets;
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -54,6 +54,10 @@
- 
- #define ISC_CLK_MAX_DIV		255
- 
-+#define ISC_SAMA5D2_PIPELINE \
-+	(WB_ENABLE | CFA_ENABLE | CC_ENABLE | GAM_ENABLES | CSC_ENABLE | \
-+	CBC_ENABLE | SUB422_ENABLE | SUB420_ENABLE)
-+
- /* This is a list of the formats that the ISC can *output* */
- static const struct isc_format sama5d2_controller_formats[] = {
- 	{
-@@ -257,6 +261,11 @@ static void isc_sama5d2_config_rlp(struc
- 			   ISC_RLP_CFG_MODE_MASK, rlp_mode);
- }
- 
-+static void isc_sama5d2_adapt_pipeline(struct isc_device *isc)
-+{
-+	isc->try_config.bits_pipeline &= ISC_SAMA5D2_PIPELINE;
-+}
-+
- /* Gamma table with gamma 1/2.2 */
- static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
- 	/* 0 --> gamma 1/1.8 */
-@@ -431,6 +440,8 @@ static int atmel_isc_probe(struct platfo
- 	isc->config_rlp = isc_sama5d2_config_rlp;
- 	isc->config_ctrls = isc_sama5d2_config_ctrls;
- 
-+	isc->adapt_pipeline = isc_sama5d2_adapt_pipeline;
-+
- 	isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
- 	isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET;
- 	isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET;
diff --git a/target/linux/at91/patches-5.10/182-media-atmel-atmel-isc-regs-add-additional-fields-for.patch b/target/linux/at91/patches-5.10/182-media-atmel-atmel-isc-regs-add-additional-fields-for.patch
deleted file mode 100644
index 00849c7d12ad..000000000000
--- a/target/linux/at91/patches-5.10/182-media-atmel-atmel-isc-regs-add-additional-fields-for.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From bf032d1a0105939b90072914d88181fbe6187f43 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:24 +0200
-Subject: [PATCH 182/247] media: atmel: atmel-isc-regs: add additional fields
- for sama7g5 type pipeline
-
-Add additional fields for registers present in sama7g5 type pipeline.
-Extend register masks for additional bits in sama7g5 type pipeline registers.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-regs.h | 16 ++++++++++++++--
- 1 file changed, 14 insertions(+), 2 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-regs.h
-+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
-@@ -289,8 +289,18 @@
- #define ISC_RLP_CFG_MODE_ARGB32         0xa
- #define ISC_RLP_CFG_MODE_YYCC           0xb
- #define ISC_RLP_CFG_MODE_YYCC_LIMITED   0xc
-+#define ISC_RLP_CFG_MODE_YCYC           0xd
- #define ISC_RLP_CFG_MODE_MASK           GENMASK(3, 0)
- 
-+#define ISC_RLP_CFG_LSH			BIT(5)
-+
-+#define ISC_RLP_CFG_YMODE_YUYV		(3 << 6)
-+#define ISC_RLP_CFG_YMODE_YVYU		(2 << 6)
-+#define ISC_RLP_CFG_YMODE_VYUY		(0 << 6)
-+#define ISC_RLP_CFG_YMODE_UYVY		(1 << 6)
-+
-+#define ISC_RLP_CFG_YMODE_MASK		GENMASK(7, 6)
-+
- /* Offset for HIS register specific to sama5d2 product */
- #define ISC_SAMA5D2_HIS_OFFSET	0
- /* Histogram Control Register */
-@@ -332,13 +342,15 @@
- #define ISC_DCFG_YMBSIZE_BEATS4         (0x1 << 4)
- #define ISC_DCFG_YMBSIZE_BEATS8         (0x2 << 4)
- #define ISC_DCFG_YMBSIZE_BEATS16        (0x3 << 4)
--#define ISC_DCFG_YMBSIZE_MASK           GENMASK(5, 4)
-+#define ISC_DCFG_YMBSIZE_BEATS32        (0x4 << 4)
-+#define ISC_DCFG_YMBSIZE_MASK           GENMASK(6, 4)
- 
- #define ISC_DCFG_CMBSIZE_SINGLE         (0x0 << 8)
- #define ISC_DCFG_CMBSIZE_BEATS4         (0x1 << 8)
- #define ISC_DCFG_CMBSIZE_BEATS8         (0x2 << 8)
- #define ISC_DCFG_CMBSIZE_BEATS16        (0x3 << 8)
--#define ISC_DCFG_CMBSIZE_MASK           GENMASK(9, 8)
-+#define ISC_DCFG_CMBSIZE_BEATS32        (0x4 << 8)
-+#define ISC_DCFG_CMBSIZE_MASK           GENMASK(10, 8)
- 
- /* DMA Control Register */
- #define ISC_DCTRL       0x000003e4
diff --git a/target/linux/at91/patches-5.10/183-media-atmel-atmel-isc-base-add-support-for-more-form.patch b/target/linux/at91/patches-5.10/183-media-atmel-atmel-isc-base-add-support-for-more-form.patch
deleted file mode 100644
index 247c901558f4..000000000000
--- a/target/linux/at91/patches-5.10/183-media-atmel-atmel-isc-base-add-support-for-more-form.patch
+++ /dev/null
@@ -1,145 +0,0 @@
-From fa9e6cd8f3ba4a277c06e4c1fb01cd69b3a57234 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:25 +0200
-Subject: [PATCH 183/247] media: atmel: atmel-isc-base: add support for more
- formats and additional pipeline modules
-
-Add support for additional formats supported by newer pipelines, and for
-additional pipeline modules.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-isc-base.c | 48 +++++++++++++++----
- 1 file changed, 38 insertions(+), 10 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -855,6 +855,8 @@ static int isc_try_validate_formats(stru
- 	case V4L2_PIX_FMT_YUV420:
- 	case V4L2_PIX_FMT_YUV422P:
- 	case V4L2_PIX_FMT_YUYV:
-+	case V4L2_PIX_FMT_UYVY:
-+	case V4L2_PIX_FMT_VYUY:
- 		ret = 0;
- 		yuv = true;
- 		break;
-@@ -869,6 +871,7 @@ static int isc_try_validate_formats(stru
- 		break;
- 	case V4L2_PIX_FMT_GREY:
- 	case V4L2_PIX_FMT_Y10:
-+	case V4L2_PIX_FMT_Y16:
- 		ret = 0;
- 		grey = true;
- 		break;
-@@ -899,6 +902,8 @@ static int isc_try_validate_formats(stru
-  */
- static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump)
- {
-+	isc->try_config.rlp_cfg_mode = 0;
-+
- 	switch (isc->try_config.fourcc) {
- 	case V4L2_PIX_FMT_SBGGR8:
- 	case V4L2_PIX_FMT_SGBRG8:
-@@ -965,7 +970,19 @@ static int isc_try_configure_rlp_dma(str
- 		isc->try_config.bpp = 16;
- 		break;
- 	case V4L2_PIX_FMT_YUYV:
--		isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC;
-+		isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_YUYV;
-+		isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32;
-+		isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED;
-+		isc->try_config.bpp = 16;
-+		break;
-+	case V4L2_PIX_FMT_UYVY:
-+		isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_UYVY;
-+		isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32;
-+		isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED;
-+		isc->try_config.bpp = 16;
-+		break;
-+	case V4L2_PIX_FMT_VYUY:
-+		isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_VYUY;
- 		isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32;
- 		isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED;
- 		isc->try_config.bpp = 16;
-@@ -976,8 +993,11 @@ static int isc_try_configure_rlp_dma(str
- 		isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED;
- 		isc->try_config.bpp = 8;
- 		break;
-+	case V4L2_PIX_FMT_Y16:
-+		isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY10 | ISC_RLP_CFG_LSH;
-+		fallthrough;
- 	case V4L2_PIX_FMT_Y10:
--		isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY10;
-+		isc->try_config.rlp_cfg_mode |= ISC_RLP_CFG_MODE_DATY10;
- 		isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16;
- 		isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED;
- 		isc->try_config.bpp = 16;
-@@ -1011,7 +1031,8 @@ static int isc_try_configure_pipeline(st
- 		/* if sensor format is RAW, we convert inside ISC */
- 		if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
- 			isc->try_config.bits_pipeline = CFA_ENABLE |
--				WB_ENABLE | GAM_ENABLES;
-+				WB_ENABLE | GAM_ENABLES | DPC_BLCENABLE |
-+				CC_ENABLE;
- 		} else {
- 			isc->try_config.bits_pipeline = 0x0;
- 		}
-@@ -1020,8 +1041,9 @@ static int isc_try_configure_pipeline(st
- 		/* if sensor format is RAW, we convert inside ISC */
- 		if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
- 			isc->try_config.bits_pipeline = CFA_ENABLE |
--				CSC_ENABLE | WB_ENABLE | GAM_ENABLES |
--				SUB420_ENABLE | SUB422_ENABLE | CBC_ENABLE;
-+				CSC_ENABLE | GAM_ENABLES | WB_ENABLE |
-+				SUB420_ENABLE | SUB422_ENABLE | CBC_ENABLE |
-+				DPC_BLCENABLE;
- 		} else {
- 			isc->try_config.bits_pipeline = 0x0;
- 		}
-@@ -1031,33 +1053,39 @@ static int isc_try_configure_pipeline(st
- 		if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
- 			isc->try_config.bits_pipeline = CFA_ENABLE |
- 				CSC_ENABLE | WB_ENABLE | GAM_ENABLES |
--				SUB422_ENABLE | CBC_ENABLE;
-+				SUB422_ENABLE | CBC_ENABLE | DPC_BLCENABLE;
- 		} else {
- 			isc->try_config.bits_pipeline = 0x0;
- 		}
- 		break;
- 	case V4L2_PIX_FMT_YUYV:
-+	case V4L2_PIX_FMT_UYVY:
-+	case V4L2_PIX_FMT_VYUY:
- 		/* if sensor format is RAW, we convert inside ISC */
- 		if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
- 			isc->try_config.bits_pipeline = CFA_ENABLE |
- 				CSC_ENABLE | WB_ENABLE | GAM_ENABLES |
--				SUB422_ENABLE | CBC_ENABLE;
-+				SUB422_ENABLE | CBC_ENABLE | DPC_BLCENABLE;
- 		} else {
- 			isc->try_config.bits_pipeline = 0x0;
- 		}
- 		break;
- 	case V4L2_PIX_FMT_GREY:
--		if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
-+	case V4L2_PIX_FMT_Y16:
- 		/* if sensor format is RAW, we convert inside ISC */
-+		if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
- 			isc->try_config.bits_pipeline = CFA_ENABLE |
- 				CSC_ENABLE | WB_ENABLE | GAM_ENABLES |
--				CBC_ENABLE;
-+				CBC_ENABLE | DPC_BLCENABLE;
- 		} else {
- 			isc->try_config.bits_pipeline = 0x0;
- 		}
- 		break;
- 	default:
--		isc->try_config.bits_pipeline = 0x0;
-+		if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code))
-+			isc->try_config.bits_pipeline = WB_ENABLE | DPC_BLCENABLE;
-+		else
-+			isc->try_config.bits_pipeline = 0x0;
- 	}
- 
- 	/* Tune the pipeline to product specific */
diff --git a/target/linux/at91/patches-5.10/184-media-atmel-atmel-isc-sama5d2-remove-duplicate-defin.patch b/target/linux/at91/patches-5.10/184-media-atmel-atmel-isc-sama5d2-remove-duplicate-defin.patch
deleted file mode 100644
index 587f4862f281..000000000000
--- a/target/linux/at91/patches-5.10/184-media-atmel-atmel-isc-sama5d2-remove-duplicate-defin.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From b36d11efc134f9f1e2804270d08b9dbefdee4a0d Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:26 +0200
-Subject: [PATCH 184/247] media: atmel: atmel-isc-sama5d2: remove duplicate
- define
-
-Remove a duplicate definition of clock max divider
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/atmel-sama5d2-isc.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -52,8 +52,6 @@
- #define ISC_SAMA5D2_MAX_SUPPORT_WIDTH   2592
- #define ISC_SAMA5D2_MAX_SUPPORT_HEIGHT  1944
- 
--#define ISC_CLK_MAX_DIV		255
--
- #define ISC_SAMA5D2_PIPELINE \
- 	(WB_ENABLE | CFA_ENABLE | CC_ENABLE | GAM_ENABLES | CSC_ENABLE | \
- 	CBC_ENABLE | SUB422_ENABLE | SUB420_ENABLE)
diff --git a/target/linux/at91/patches-5.10/185-media-atmel-atmel-isc-add-microchip-xisc-driver.patch b/target/linux/at91/patches-5.10/185-media-atmel-atmel-isc-add-microchip-xisc-driver.patch
deleted file mode 100644
index a21ac2a7c02d..000000000000
--- a/target/linux/at91/patches-5.10/185-media-atmel-atmel-isc-add-microchip-xisc-driver.patch
+++ /dev/null
@@ -1,810 +0,0 @@
-From 74fd7ea680cb1a3a43b51a7279aea45efdf9ec42 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Tue, 13 Apr 2021 12:57:29 +0200
-Subject: [PATCH 185/247] media: atmel: atmel-isc: add microchip-xisc driver
-
-Add driver for the extended variant of the isc, the microchip XISC
-present on sama7g5 product.
-
-[hverkuil: drop MODULE_SUPPORTED_DEVICE, no longer exists]
-[hverkuil: made isc_sama7g5_config_csc et al static]
-[hverkuil: made sama7g5_controller_formats et al static]
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/Makefile               |   1 +
- drivers/media/platform/atmel/Kconfig          |  11 +
- drivers/media/platform/atmel/Makefile         |   2 +
- drivers/media/platform/atmel/atmel-isc-base.c |   2 +-
- drivers/media/platform/atmel/atmel-isc-regs.h |  26 +
- .../media/platform/atmel/atmel-sama7g5-isc.c  | 630 ++++++++++++++++++
- 6 files changed, 671 insertions(+), 1 deletion(-)
- create mode 100644 drivers/media/platform/atmel/atmel-sama7g5-isc.c
-
---- a/drivers/media/platform/Makefile
-+++ b/drivers/media/platform/Makefile
-@@ -64,6 +64,7 @@ obj-$(CONFIG_VIDEO_RCAR_VIN)		+= rcar-vi
- 
- obj-$(CONFIG_VIDEO_ATMEL_ISC)		+= atmel/
- obj-$(CONFIG_VIDEO_ATMEL_ISI)		+= atmel/
-+obj-$(CONFIG_VIDEO_ATMEL_XISC)		+= atmel/
- 
- obj-$(CONFIG_VIDEO_STM32_DCMI)		+= stm32/
- 
---- a/drivers/media/platform/atmel/Kconfig
-+++ b/drivers/media/platform/atmel/Kconfig
-@@ -12,6 +12,17 @@ config VIDEO_ATMEL_ISC
- 	   This module makes the ATMEL Image Sensor Controller available
- 	   as a v4l2 device.
- 
-+config VIDEO_ATMEL_XISC
-+	tristate "ATMEL eXtended Image Sensor Controller (XISC) support"
-+	depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API
-+	depends on ARCH_AT91 || COMPILE_TEST
-+	select VIDEOBUF2_DMA_CONTIG
-+	select REGMAP_MMIO
-+	select V4L2_FWNODE
-+	help
-+	   This module makes the ATMEL eXtended Image Sensor Controller
-+	   available as a v4l2 device.
-+
- config VIDEO_ATMEL_ISI
- 	tristate "ATMEL Image Sensor Interface (ISI) support"
- 	depends on VIDEO_V4L2 && OF
---- a/drivers/media/platform/atmel/Makefile
-+++ b/drivers/media/platform/atmel/Makefile
-@@ -1,5 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0-only
- atmel-isc-objs = atmel-sama5d2-isc.o atmel-isc-base.o
-+atmel-xisc-objs = atmel-sama7g5-isc.o atmel-isc-base.o
- 
- obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
- obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel-isc.o
-+obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel-xisc.o
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -600,7 +600,7 @@ static int isc_configure(struct isc_devi
- 	mask = ISC_PFE_CFG0_BPS_MASK | ISC_PFE_CFG0_HPOL_LOW |
- 	       ISC_PFE_CFG0_VPOL_LOW | ISC_PFE_CFG0_PPOL_LOW |
- 	       ISC_PFE_CFG0_MODE_MASK | ISC_PFE_CFG0_CCIR_CRC |
--		   ISC_PFE_CFG0_CCIR656;
-+	       ISC_PFE_CFG0_CCIR656 | ISC_PFE_CFG0_MIPI;
- 
- 	regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0);
- 
---- a/drivers/media/platform/atmel/atmel-isc-regs.h
-+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
-@@ -26,6 +26,7 @@
- #define ISC_PFE_CFG0_PPOL_LOW   BIT(2)
- #define ISC_PFE_CFG0_CCIR656    BIT(9)
- #define ISC_PFE_CFG0_CCIR_CRC   BIT(10)
-+#define ISC_PFE_CFG0_MIPI	BIT(14)
- 
- #define ISC_PFE_CFG0_MODE_PROGRESSIVE   (0x0 << 4)
- #define ISC_PFE_CFG0_MODE_MASK          GENMASK(6, 4)
-@@ -184,6 +185,8 @@
- /* ISC Gamma Correction Control Register */
- #define ISC_GAM_CTRL    0x00000094
- 
-+#define ISC_GAM_CTRL_BIPART	BIT(4)
-+
- /* ISC_Gamma Correction Blue Entry Register */
- #define ISC_GAM_BENTRY	0x00000098
- 
-@@ -222,6 +225,8 @@
- 
- /* Offset for CSC register specific to sama5d2 product */
- #define ISC_SAMA5D2_CSC_OFFSET	0
-+/* Offset for CSC register specific to sama7g5 product */
-+#define ISC_SAMA7G5_CSC_OFFSET	0x11c
- 
- /* Color Space Conversion Control Register */
- #define ISC_CSC_CTRL    0x00000398
-@@ -246,6 +251,8 @@
- 
- /* Offset for CBC register specific to sama5d2 product */
- #define ISC_SAMA5D2_CBC_OFFSET	0
-+/* Offset for CBC register specific to sama7g5 product */
-+#define ISC_SAMA7G5_CBC_OFFSET	0x11c
- 
- /* Contrast And Brightness Control Register */
- #define ISC_CBC_CTRL    0x000003b4
-@@ -261,18 +268,30 @@
- #define ISC_CBC_CONTRAST	0x000003c0
- #define ISC_CBC_CONTRAST_MASK	GENMASK(11, 0)
- 
-+/* Hue Register */
-+#define ISC_CBCHS_HUE	0x4e0
-+/* Saturation Register */
-+#define ISC_CBCHS_SAT	0x4e4
-+
- /* Offset for SUB422 register specific to sama5d2 product */
- #define ISC_SAMA5D2_SUB422_OFFSET	0
-+/* Offset for SUB422 register specific to sama7g5 product */
-+#define ISC_SAMA7G5_SUB422_OFFSET	0x124
-+
- /* Subsampling 4:4:4 to 4:2:2 Control Register */
- #define ISC_SUB422_CTRL 0x000003c4
- 
- /* Offset for SUB420 register specific to sama5d2 product */
- #define ISC_SAMA5D2_SUB420_OFFSET	0
-+/* Offset for SUB420 register specific to sama7g5 product */
-+#define ISC_SAMA7G5_SUB420_OFFSET	0x124
- /* Subsampling 4:2:2 to 4:2:0 Control Register */
- #define ISC_SUB420_CTRL 0x000003cc
- 
- /* Offset for RLP register specific to sama5d2 product */
- #define ISC_SAMA5D2_RLP_OFFSET	0
-+/* Offset for RLP register specific to sama7g5 product */
-+#define ISC_SAMA7G5_RLP_OFFSET	0x124
- /* Rounding, Limiting and Packing Configuration Register */
- #define ISC_RLP_CFG     0x000003d0
- 
-@@ -303,6 +322,8 @@
- 
- /* Offset for HIS register specific to sama5d2 product */
- #define ISC_SAMA5D2_HIS_OFFSET	0
-+/* Offset for HIS register specific to sama7g5 product */
-+#define ISC_SAMA7G5_HIS_OFFSET	0x124
- /* Histogram Control Register */
- #define ISC_HIS_CTRL	0x000003d4
- 
-@@ -326,6 +347,8 @@
- 
- /* Offset for DMA register specific to sama5d2 product */
- #define ISC_SAMA5D2_DMA_OFFSET	0
-+/* Offset for DMA register specific to sama7g5 product */
-+#define ISC_SAMA7G5_DMA_OFFSET	0x13c
- 
- /* DMA Configuration Register */
- #define ISC_DCFG        0x000003e0
-@@ -376,11 +399,14 @@
- 
- /* Offset for version register specific to sama5d2 product */
- #define ISC_SAMA5D2_VERSION_OFFSET	0
-+#define ISC_SAMA7G5_VERSION_OFFSET	0x13c
- /* Version Register */
- #define ISC_VERSION	0x0000040c
- 
- /* Offset for version register specific to sama5d2 product */
- #define ISC_SAMA5D2_HIS_ENTRY_OFFSET	0
-+/* Offset for version register specific to sama7g5 product */
-+#define ISC_SAMA7G5_HIS_ENTRY_OFFSET	0x14c
- /* Histogram Entry */
- #define ISC_HIS_ENTRY	0x00000410
- 
---- /dev/null
-+++ b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
-@@ -0,0 +1,630 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Microchip eXtended Image Sensor Controller (XISC) driver
-+ *
-+ * Copyright (C) 2019-2021 Microchip Technology, Inc. and its subsidiaries
-+ *
-+ * Author: Eugen Hristev <eugen.hristev@microchip.com>
-+ *
-+ * Sensor-->PFE-->DPC-->WB-->CFA-->CC-->GAM-->VHXS-->CSC-->CBHS-->SUB-->RLP-->DMA-->HIS
-+ *
-+ * ISC video pipeline integrates the following submodules:
-+ * PFE: Parallel Front End to sample the camera sensor input stream
-+ * DPC: Defective Pixel Correction with black offset correction, green disparity
-+ *      correction and defective pixel correction (3 modules total)
-+ *  WB: Programmable white balance in the Bayer domain
-+ * CFA: Color filter array interpolation module
-+ *  CC: Programmable color correction
-+ * GAM: Gamma correction
-+ *VHXS: Vertical and Horizontal Scaler
-+ * CSC: Programmable color space conversion
-+ *CBHS: Contrast Brightness Hue and Saturation control
-+ * SUB: This module performs YCbCr444 to YCbCr420 chrominance subsampling
-+ * RLP: This module performs rounding, range limiting
-+ *      and packing of the incoming data
-+ * DMA: This module performs DMA master accesses to write frames to external RAM
-+ * HIS: Histogram module performs statistic counters on the frames
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/clkdev.h>
-+#include <linux/clk-provider.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/math64.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_graph.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_runtime.h>
-+#include <linux/regmap.h>
-+#include <linux/videodev2.h>
-+
-+#include <media/v4l2-ctrls.h>
-+#include <media/v4l2-device.h>
-+#include <media/v4l2-event.h>
-+#include <media/v4l2-image-sizes.h>
-+#include <media/v4l2-ioctl.h>
-+#include <media/v4l2-fwnode.h>
-+#include <media/v4l2-subdev.h>
-+#include <media/videobuf2-dma-contig.h>
-+
-+#include "atmel-isc-regs.h"
-+#include "atmel-isc.h"
-+
-+#define ISC_SAMA7G5_MAX_SUPPORT_WIDTH   3264
-+#define ISC_SAMA7G5_MAX_SUPPORT_HEIGHT  2464
-+
-+#define ISC_SAMA7G5_PIPELINE \
-+	(WB_ENABLE | CFA_ENABLE | CC_ENABLE | GAM_ENABLES | CSC_ENABLE | \
-+	CBC_ENABLE | SUB422_ENABLE | SUB420_ENABLE)
-+
-+/* This is a list of the formats that the ISC can *output* */
-+static const struct isc_format sama7g5_controller_formats[] = {
-+	{
-+		.fourcc		= V4L2_PIX_FMT_ARGB444,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_ARGB555,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_RGB565,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_ABGR32,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_XBGR32,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_YUV420,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_UYVY,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_VYUY,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_YUYV,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_YUV422P,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_GREY,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_Y10,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_Y16,
-+	},
-+};
-+
-+/* This is a list of formats that the ISC can receive as *input* */
-+static struct isc_format sama7g5_formats_list[] = {
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SBGGR8,
-+		.mbus_code	= MEDIA_BUS_FMT_SBGGR8_1X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+		.cfa_baycfg	= ISC_BAY_CFG_BGBG,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SGBRG8,
-+		.mbus_code	= MEDIA_BUS_FMT_SGBRG8_1X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+		.cfa_baycfg	= ISC_BAY_CFG_GBGB,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SGRBG8,
-+		.mbus_code	= MEDIA_BUS_FMT_SGRBG8_1X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+		.cfa_baycfg	= ISC_BAY_CFG_GRGR,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SRGGB8,
-+		.mbus_code	= MEDIA_BUS_FMT_SRGGB8_1X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+		.cfa_baycfg	= ISC_BAY_CFG_RGRG,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SBGGR10,
-+		.mbus_code	= MEDIA_BUS_FMT_SBGGR10_1X10,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
-+		.cfa_baycfg	= ISC_BAY_CFG_RGRG,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SGBRG10,
-+		.mbus_code	= MEDIA_BUS_FMT_SGBRG10_1X10,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
-+		.cfa_baycfg	= ISC_BAY_CFG_GBGB,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SGRBG10,
-+		.mbus_code	= MEDIA_BUS_FMT_SGRBG10_1X10,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
-+		.cfa_baycfg	= ISC_BAY_CFG_GRGR,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SRGGB10,
-+		.mbus_code	= MEDIA_BUS_FMT_SRGGB10_1X10,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
-+		.cfa_baycfg	= ISC_BAY_CFG_RGRG,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SBGGR12,
-+		.mbus_code	= MEDIA_BUS_FMT_SBGGR12_1X12,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TWELVE,
-+		.cfa_baycfg	= ISC_BAY_CFG_BGBG,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SGBRG12,
-+		.mbus_code	= MEDIA_BUS_FMT_SGBRG12_1X12,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TWELVE,
-+		.cfa_baycfg	= ISC_BAY_CFG_GBGB,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SGRBG12,
-+		.mbus_code	= MEDIA_BUS_FMT_SGRBG12_1X12,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TWELVE,
-+		.cfa_baycfg	= ISC_BAY_CFG_GRGR,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_SRGGB12,
-+		.mbus_code	= MEDIA_BUS_FMT_SRGGB12_1X12,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TWELVE,
-+		.cfa_baycfg	= ISC_BAY_CFG_RGRG,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_GREY,
-+		.mbus_code	= MEDIA_BUS_FMT_Y8_1X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_YUYV,
-+		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_UYVY,
-+		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_RGB565,
-+		.mbus_code	= MEDIA_BUS_FMT_RGB565_2X8_LE,
-+		.pfe_cfg0_bps	= ISC_PFE_CFG0_BPS_EIGHT,
-+	},
-+	{
-+		.fourcc		= V4L2_PIX_FMT_Y10,
-+		.mbus_code	= MEDIA_BUS_FMT_Y10_1X10,
-+		.pfe_cfg0_bps	= ISC_PFG_CFG0_BPS_TEN,
-+	},
-+
-+};
-+
-+static void isc_sama7g5_config_csc(struct isc_device *isc)
-+{
-+	struct regmap *regmap = isc->regmap;
-+
-+	/* Convert RGB to YUV */
-+	regmap_write(regmap, ISC_CSC_YR_YG + isc->offsets.csc,
-+		     0x42 | (0x81 << 16));
-+	regmap_write(regmap, ISC_CSC_YB_OY + isc->offsets.csc,
-+		     0x19 | (0x10 << 16));
-+	regmap_write(regmap, ISC_CSC_CBR_CBG + isc->offsets.csc,
-+		     0xFDA | (0xFB6 << 16));
-+	regmap_write(regmap, ISC_CSC_CBB_OCB + isc->offsets.csc,
-+		     0x70 | (0x80 << 16));
-+	regmap_write(regmap, ISC_CSC_CRR_CRG + isc->offsets.csc,
-+		     0x70 | (0xFA2 << 16));
-+	regmap_write(regmap, ISC_CSC_CRB_OCR + isc->offsets.csc,
-+		     0xFEE | (0x80 << 16));
-+}
-+
-+static void isc_sama7g5_config_cbc(struct isc_device *isc)
-+{
-+	struct regmap *regmap = isc->regmap;
-+
-+	/* Configure what is set via v4l2 ctrls */
-+	regmap_write(regmap, ISC_CBC_BRIGHT + isc->offsets.cbc, isc->ctrls.brightness);
-+	regmap_write(regmap, ISC_CBC_CONTRAST + isc->offsets.cbc, isc->ctrls.contrast);
-+	/* Configure Hue and Saturation as neutral midpoint */
-+	regmap_write(regmap, ISC_CBCHS_HUE, 0);
-+	regmap_write(regmap, ISC_CBCHS_SAT, (1 << 4));
-+}
-+
-+static void isc_sama7g5_config_cc(struct isc_device *isc)
-+{
-+	struct regmap *regmap = isc->regmap;
-+
-+	/* Configure each register at the neutral fixed point 1.0 or 0.0 */
-+	regmap_write(regmap, ISC_CC_RR_RG, (1 << 8));
-+	regmap_write(regmap, ISC_CC_RB_OR, 0);
-+	regmap_write(regmap, ISC_CC_GR_GG, (1 << 8) << 16);
-+	regmap_write(regmap, ISC_CC_GB_OG, 0);
-+	regmap_write(regmap, ISC_CC_BR_BG, 0);
-+	regmap_write(regmap, ISC_CC_BB_OB, (1 << 8));
-+}
-+
-+static void isc_sama7g5_config_ctrls(struct isc_device *isc,
-+				     const struct v4l2_ctrl_ops *ops)
-+{
-+	struct isc_ctrls *ctrls = &isc->ctrls;
-+	struct v4l2_ctrl_handler *hdl = &ctrls->handler;
-+
-+	ctrls->contrast = 16;
-+
-+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 16);
-+}
-+
-+static void isc_sama7g5_config_dpc(struct isc_device *isc)
-+{
-+	u32 bay_cfg = isc->config.sd_format->cfa_baycfg;
-+	struct regmap *regmap = isc->regmap;
-+
-+	regmap_update_bits(regmap, ISC_DPC_CFG, ISC_DPC_CFG_BLOFF_MASK,
-+			   (64 << ISC_DPC_CFG_BLOFF_SHIFT));
-+	regmap_update_bits(regmap, ISC_DPC_CFG, ISC_DPC_CFG_BAYCFG_MASK,
-+			   (bay_cfg << ISC_DPC_CFG_BAYCFG_SHIFT));
-+}
-+
-+static void isc_sama7g5_config_gam(struct isc_device *isc)
-+{
-+	struct regmap *regmap = isc->regmap;
-+
-+	regmap_update_bits(regmap, ISC_GAM_CTRL, ISC_GAM_CTRL_BIPART,
-+			   ISC_GAM_CTRL_BIPART);
-+}
-+
-+static void isc_sama7g5_config_rlp(struct isc_device *isc)
-+{
-+	struct regmap *regmap = isc->regmap;
-+	u32 rlp_mode = isc->config.rlp_cfg_mode;
-+
-+	regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
-+			   ISC_RLP_CFG_MODE_MASK | ISC_RLP_CFG_LSH |
-+			   ISC_RLP_CFG_YMODE_MASK, rlp_mode);
-+}
-+
-+static void isc_sama7g5_adapt_pipeline(struct isc_device *isc)
-+{
-+	isc->try_config.bits_pipeline &= ISC_SAMA7G5_PIPELINE;
-+}
-+
-+/* Gamma table with gamma 1/2.2 */
-+static const u32 isc_sama7g5_gamma_table[][GAMMA_ENTRIES] = {
-+	/* index 0 --> gamma bipartite */
-+	{
-+	      0x980,  0x4c0320,  0x650260,  0x7801e0,  0x8701a0,  0x940180,
-+	   0xa00160,  0xab0120,  0xb40120,  0xbd0120,  0xc60100,  0xce0100,
-+	   0xd600e0,  0xdd00e0,  0xe400e0,  0xeb00c0,  0xf100c0,  0xf700c0,
-+	   0xfd00c0, 0x10300a0, 0x10800c0, 0x10e00a0, 0x11300a0, 0x11800a0,
-+	  0x11d00a0, 0x12200a0, 0x12700a0, 0x12c0080, 0x13000a0, 0x1350080,
-+	  0x13900a0, 0x13e0080, 0x1420076, 0x17d0062, 0x1ae0054, 0x1d8004a,
-+	  0x1fd0044, 0x21f003e, 0x23e003a, 0x25b0036, 0x2760032, 0x28f0030,
-+	  0x2a7002e, 0x2be002c, 0x2d4002c, 0x2ea0028, 0x2fe0028, 0x3120026,
-+	  0x3250024, 0x3370024, 0x3490022, 0x35a0022, 0x36b0020, 0x37b0020,
-+	  0x38b0020, 0x39b001e, 0x3aa001e, 0x3b9001c, 0x3c7001c, 0x3d5001c,
-+	  0x3e3001c, 0x3f1001c, 0x3ff001a, 0x40c001a },
-+};
-+
-+static int xisc_parse_dt(struct device *dev, struct isc_device *isc)
-+{
-+	struct device_node *np = dev->of_node;
-+	struct device_node *epn = NULL;
-+	struct isc_subdev_entity *subdev_entity;
-+	unsigned int flags;
-+	int ret;
-+	bool mipi_mode;
-+
-+	INIT_LIST_HEAD(&isc->subdev_entities);
-+
-+	mipi_mode = of_property_read_bool(np, "microchip,mipi-mode");
-+
-+	while (1) {
-+		struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
-+
-+		epn = of_graph_get_next_endpoint(np, epn);
-+		if (!epn)
-+			return 0;
-+
-+		ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(epn),
-+						 &v4l2_epn);
-+		if (ret) {
-+			ret = -EINVAL;
-+			dev_err(dev, "Could not parse the endpoint\n");
-+			break;
-+		}
-+
-+		subdev_entity = devm_kzalloc(dev, sizeof(*subdev_entity),
-+					     GFP_KERNEL);
-+		if (!subdev_entity) {
-+			ret = -ENOMEM;
-+			break;
-+		}
-+		subdev_entity->epn = epn;
-+
-+		flags = v4l2_epn.bus.parallel.flags;
-+
-+		if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
-+			subdev_entity->pfe_cfg0 = ISC_PFE_CFG0_HPOL_LOW;
-+
-+		if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
-+			subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_VPOL_LOW;
-+
-+		if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
-+			subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_PPOL_LOW;
-+
-+		if (v4l2_epn.bus_type == V4L2_MBUS_BT656)
-+			subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_CCIR_CRC |
-+					ISC_PFE_CFG0_CCIR656;
-+
-+		if (mipi_mode)
-+			subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_MIPI;
-+
-+		list_add_tail(&subdev_entity->list, &isc->subdev_entities);
-+	}
-+	of_node_put(epn);
-+
-+	return ret;
-+}
-+
-+static int microchip_xisc_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct isc_device *isc;
-+	struct resource *res;
-+	void __iomem *io_base;
-+	struct isc_subdev_entity *subdev_entity;
-+	int irq;
-+	int ret;
-+	u32 ver;
-+
-+	isc = devm_kzalloc(dev, sizeof(*isc), GFP_KERNEL);
-+	if (!isc)
-+		return -ENOMEM;
-+
-+	platform_set_drvdata(pdev, isc);
-+	isc->dev = dev;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	io_base = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(io_base))
-+		return PTR_ERR(io_base);
-+
-+	isc->regmap = devm_regmap_init_mmio(dev, io_base, &isc_regmap_config);
-+	if (IS_ERR(isc->regmap)) {
-+		ret = PTR_ERR(isc->regmap);
-+		dev_err(dev, "failed to init register map: %d\n", ret);
-+		return ret;
-+	}
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0)
-+		return irq;
-+
-+	ret = devm_request_irq(dev, irq, isc_interrupt, 0,
-+			       "microchip-sama7g5-xisc", isc);
-+	if (ret < 0) {
-+		dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n",
-+			irq, ret);
-+		return ret;
-+	}
-+
-+	isc->gamma_table = isc_sama7g5_gamma_table;
-+	isc->gamma_max = 0;
-+
-+	isc->max_width = ISC_SAMA7G5_MAX_SUPPORT_WIDTH;
-+	isc->max_height = ISC_SAMA7G5_MAX_SUPPORT_HEIGHT;
-+
-+	isc->config_dpc = isc_sama7g5_config_dpc;
-+	isc->config_csc = isc_sama7g5_config_csc;
-+	isc->config_cbc = isc_sama7g5_config_cbc;
-+	isc->config_cc = isc_sama7g5_config_cc;
-+	isc->config_gam = isc_sama7g5_config_gam;
-+	isc->config_rlp = isc_sama7g5_config_rlp;
-+	isc->config_ctrls = isc_sama7g5_config_ctrls;
-+
-+	isc->adapt_pipeline = isc_sama7g5_adapt_pipeline;
-+
-+	isc->offsets.csc = ISC_SAMA7G5_CSC_OFFSET;
-+	isc->offsets.cbc = ISC_SAMA7G5_CBC_OFFSET;
-+	isc->offsets.sub422 = ISC_SAMA7G5_SUB422_OFFSET;
-+	isc->offsets.sub420 = ISC_SAMA7G5_SUB420_OFFSET;
-+	isc->offsets.rlp = ISC_SAMA7G5_RLP_OFFSET;
-+	isc->offsets.his = ISC_SAMA7G5_HIS_OFFSET;
-+	isc->offsets.dma = ISC_SAMA7G5_DMA_OFFSET;
-+	isc->offsets.version = ISC_SAMA7G5_VERSION_OFFSET;
-+	isc->offsets.his_entry = ISC_SAMA7G5_HIS_ENTRY_OFFSET;
-+
-+	isc->controller_formats = sama7g5_controller_formats;
-+	isc->controller_formats_size = ARRAY_SIZE(sama7g5_controller_formats);
-+	isc->formats_list = sama7g5_formats_list;
-+	isc->formats_list_size = ARRAY_SIZE(sama7g5_formats_list);
-+
-+	/* sama7g5-isc RAM access port is full AXI4 - 32 bits per beat */
-+	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS32 | ISC_DCFG_CMBSIZE_BEATS32;
-+
-+	ret = isc_pipeline_init(isc);
-+	if (ret)
-+		return ret;
-+
-+	isc->hclock = devm_clk_get(dev, "hclock");
-+	if (IS_ERR(isc->hclock)) {
-+		ret = PTR_ERR(isc->hclock);
-+		dev_err(dev, "failed to get hclock: %d\n", ret);
-+		return ret;
-+	}
-+
-+	ret = clk_prepare_enable(isc->hclock);
-+	if (ret) {
-+		dev_err(dev, "failed to enable hclock: %d\n", ret);
-+		return ret;
-+	}
-+
-+	ret = isc_clk_init(isc);
-+	if (ret) {
-+		dev_err(dev, "failed to init isc clock: %d\n", ret);
-+		goto unprepare_hclk;
-+	}
-+
-+	isc->ispck = isc->isc_clks[ISC_ISPCK].clk;
-+
-+	ret = clk_prepare_enable(isc->ispck);
-+	if (ret) {
-+		dev_err(dev, "failed to enable ispck: %d\n", ret);
-+		goto unprepare_hclk;
-+	}
-+
-+	/* ispck should be greater or equal to hclock */
-+	ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
-+	if (ret) {
-+		dev_err(dev, "failed to set ispck rate: %d\n", ret);
-+		goto unprepare_clk;
-+	}
-+
-+	ret = v4l2_device_register(dev, &isc->v4l2_dev);
-+	if (ret) {
-+		dev_err(dev, "unable to register v4l2 device.\n");
-+		goto unprepare_clk;
-+	}
-+
-+	ret = xisc_parse_dt(dev, isc);
-+	if (ret) {
-+		dev_err(dev, "fail to parse device tree\n");
-+		goto unregister_v4l2_device;
-+	}
-+
-+	if (list_empty(&isc->subdev_entities)) {
-+		dev_err(dev, "no subdev found\n");
-+		ret = -ENODEV;
-+		goto unregister_v4l2_device;
-+	}
-+
-+	list_for_each_entry(subdev_entity, &isc->subdev_entities, list) {
-+		struct v4l2_async_subdev *asd;
-+
-+		v4l2_async_notifier_init(&subdev_entity->notifier);
-+
-+		asd = v4l2_async_notifier_add_fwnode_remote_subdev(
-+					&subdev_entity->notifier,
-+					of_fwnode_handle(subdev_entity->epn),
-+					struct v4l2_async_subdev);
-+
-+		of_node_put(subdev_entity->epn);
-+		subdev_entity->epn = NULL;
-+
-+		if (IS_ERR(asd)) {
-+			ret = PTR_ERR(asd);
-+			goto cleanup_subdev;
-+		}
-+
-+		subdev_entity->notifier.ops = &isc_async_ops;
-+
-+		ret = v4l2_async_notifier_register(&isc->v4l2_dev,
-+						   &subdev_entity->notifier);
-+		if (ret) {
-+			dev_err(dev, "fail to register async notifier\n");
-+			goto cleanup_subdev;
-+		}
-+
-+		if (video_is_registered(&isc->video_dev))
-+			break;
-+	}
-+
-+	pm_runtime_set_active(dev);
-+	pm_runtime_enable(dev);
-+	pm_request_idle(dev);
-+
-+	regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
-+	dev_info(dev, "Microchip XISC version %x\n", ver);
-+
-+	return 0;
-+
-+cleanup_subdev:
-+	isc_subdev_cleanup(isc);
-+
-+unregister_v4l2_device:
-+	v4l2_device_unregister(&isc->v4l2_dev);
-+
-+unprepare_clk:
-+	clk_disable_unprepare(isc->ispck);
-+unprepare_hclk:
-+	clk_disable_unprepare(isc->hclock);
-+
-+	isc_clk_cleanup(isc);
-+
-+	return ret;
-+}
-+
-+static int microchip_xisc_remove(struct platform_device *pdev)
-+{
-+	struct isc_device *isc = platform_get_drvdata(pdev);
-+
-+	pm_runtime_disable(&pdev->dev);
-+
-+	isc_subdev_cleanup(isc);
-+
-+	v4l2_device_unregister(&isc->v4l2_dev);
-+
-+	clk_disable_unprepare(isc->ispck);
-+	clk_disable_unprepare(isc->hclock);
-+
-+	isc_clk_cleanup(isc);
-+
-+	return 0;
-+}
-+
-+static int __maybe_unused xisc_runtime_suspend(struct device *dev)
-+{
-+	struct isc_device *isc = dev_get_drvdata(dev);
-+
-+	clk_disable_unprepare(isc->ispck);
-+	clk_disable_unprepare(isc->hclock);
-+
-+	return 0;
-+}
-+
-+static int __maybe_unused xisc_runtime_resume(struct device *dev)
-+{
-+	struct isc_device *isc = dev_get_drvdata(dev);
-+	int ret;
-+
-+	ret = clk_prepare_enable(isc->hclock);
-+	if (ret)
-+		return ret;
-+
-+	ret = clk_prepare_enable(isc->ispck);
-+	if (ret)
-+		clk_disable_unprepare(isc->hclock);
-+
-+	return ret;
-+}
-+
-+static const struct dev_pm_ops microchip_xisc_dev_pm_ops = {
-+	SET_RUNTIME_PM_OPS(xisc_runtime_suspend, xisc_runtime_resume, NULL)
-+};
-+
-+static const struct of_device_id microchip_xisc_of_match[] = {
-+	{ .compatible = "microchip,sama7g5-isc" },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, microchip_xisc_of_match);
-+
-+static struct platform_driver microchip_xisc_driver = {
-+	.probe	= microchip_xisc_probe,
-+	.remove	= microchip_xisc_remove,
-+	.driver	= {
-+		.name		= "microchip-sama7g5-xisc",
-+		.pm		= &microchip_xisc_dev_pm_ops,
-+		.of_match_table = of_match_ptr(microchip_xisc_of_match),
-+	},
-+};
-+
-+module_platform_driver(microchip_xisc_driver);
-+
-+MODULE_AUTHOR("Eugen Hristev <eugen.hristev@microchip.com>");
-+MODULE_DESCRIPTION("The V4L2 driver for Microchip-XISC");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/at91/patches-5.10/186-ASoC-atmel-fix-shadowed-variable.patch b/target/linux/at91/patches-5.10/186-ASoC-atmel-fix-shadowed-variable.patch
deleted file mode 100644
index 7e88bb39ce36..000000000000
--- a/target/linux/at91/patches-5.10/186-ASoC-atmel-fix-shadowed-variable.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 1b41c69264d7233a3e9a0aa36333ee22a5a049e9 Mon Sep 17 00:00:00 2001
-From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
-Date: Fri, 26 Mar 2021 16:59:12 -0500
-Subject: [PATCH 186/247] ASoC: atmel: fix shadowed variable
-
-Fix cppcheck warning:
-
-sound/soc/atmel/atmel-classd.c:51:14: style: Local variable 'pwm_type'
-shadows outer variable [shadowVariable]
- const char *pwm_type;
-             ^
-sound/soc/atmel/atmel-classd.c:226:27: note: Shadowed declaration
-static const char * const pwm_type[] = {
-                          ^
-sound/soc/atmel/atmel-classd.c:51:14: note: Shadow variable
- const char *pwm_type;
-             ^
-
-Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
-Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Link: https://lore.kernel.org/r/20210326215927.936377-3-pierre-louis.bossart@linux.intel.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/atmel/atmel-classd.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/sound/soc/atmel/atmel-classd.c
-+++ b/sound/soc/atmel/atmel-classd.c
-@@ -48,7 +48,7 @@ static struct atmel_classd_pdata *atmel_
- {
- 	struct device_node *np = dev->of_node;
- 	struct atmel_classd_pdata *pdata;
--	const char *pwm_type;
-+	const char *pwm_type_s;
- 	int ret;
- 
- 	if (!np) {
-@@ -60,8 +60,8 @@ static struct atmel_classd_pdata *atmel_
- 	if (!pdata)
- 		return ERR_PTR(-ENOMEM);
- 
--	ret = of_property_read_string(np, "atmel,pwm-type", &pwm_type);
--	if ((ret == 0) && (strcmp(pwm_type, "diff") == 0))
-+	ret = of_property_read_string(np, "atmel,pwm-type", &pwm_type_s);
-+	if ((ret == 0) && (strcmp(pwm_type_s, "diff") == 0))
- 		pdata->pwm_type = CLASSD_MR_PWMTYP_DIFF;
- 	else
- 		pdata->pwm_type = CLASSD_MR_PWMTYP_SINGLE;
diff --git a/target/linux/at91/patches-5.10/187-ASoC-atmel-atmel-i2s-remove-useless-initialization.patch b/target/linux/at91/patches-5.10/187-ASoC-atmel-atmel-i2s-remove-useless-initialization.patch
deleted file mode 100644
index ed2ae1a979d4..000000000000
--- a/target/linux/at91/patches-5.10/187-ASoC-atmel-atmel-i2s-remove-useless-initialization.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From e53725fe0c7e6b52927280272f49fe5f4b4ef317 Mon Sep 17 00:00:00 2001
-From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
-Date: Fri, 26 Mar 2021 16:59:13 -0500
-Subject: [PATCH 187/247] ASoC: atmel: atmel-i2s: remove useless initialization
-
-Cppcheck complains:
-
-sound/soc/atmel/atmel-i2s.c:628:6: style: Redundant initialization for 'err'. The initialized value is overwritten before it is read. [redundantInitialization]
- err = devm_request_irq(&pdev->dev, irq, atmel_i2s_interrupt, 0,
-     ^
-sound/soc/atmel/atmel-i2s.c:598:10: note: err is initialized
- int err = -ENXIO;
-         ^
-sound/soc/atmel/atmel-i2s.c:628:6: note: err is overwritten
- err = devm_request_irq(&pdev->dev, irq, atmel_i2s_interrupt, 0,
-     ^
-
-Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
-Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Link: https://lore.kernel.org/r/20210326215927.936377-4-pierre-louis.bossart@linux.intel.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/atmel/atmel-i2s.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/sound/soc/atmel/atmel-i2s.c
-+++ b/sound/soc/atmel/atmel-i2s.c
-@@ -613,7 +613,7 @@ static int atmel_i2s_probe(struct platfo
- 	struct regmap *regmap;
- 	void __iomem *base;
- 	int irq;
--	int err = -ENXIO;
-+	int err;
- 	unsigned int pcm_flags = 0;
- 	unsigned int version;
- 
diff --git a/target/linux/at91/patches-5.10/188-ASoC-atmel-i2s-Set-symmetric-sample-bits.patch b/target/linux/at91/patches-5.10/188-ASoC-atmel-i2s-Set-symmetric-sample-bits.patch
deleted file mode 100644
index bc8c7fa2b1df..000000000000
--- a/target/linux/at91/patches-5.10/188-ASoC-atmel-i2s-Set-symmetric-sample-bits.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From a6f337fdf68294cfae233724567cbeea0ae5148f Mon Sep 17 00:00:00 2001
-From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Date: Fri, 18 Jun 2021 18:07:40 +0300
-Subject: [PATCH 188/247] ASoC: atmel-i2s: Set symmetric sample bits
-
-The I2S needs to have the same sample bits for both capture and playback
-streams.
-
-Fixes: b543e467d1a9 ("ASoC: atmel-i2s: add driver for the new Atmel I2S controller")
-Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Link: https://lore.kernel.org/r/20210618150741.401739-1-codrin.ciubotariu@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/atmel/atmel-i2s.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/sound/soc/atmel/atmel-i2s.c
-+++ b/sound/soc/atmel/atmel-i2s.c
-@@ -560,6 +560,7 @@ static struct snd_soc_dai_driver atmel_i
- 	},
- 	.ops = &atmel_i2s_dai_ops,
- 	.symmetric_rates = 1,
-+	.symmetric_samplebits = 1,
- };
- 
- static const struct snd_soc_component_driver atmel_i2s_component = {
diff --git a/target/linux/at91/patches-5.10/189-watchdog-sama5d4_wdt-add-support-for-sama7g5-wdt.patch b/target/linux/at91/patches-5.10/189-watchdog-sama5d4_wdt-add-support-for-sama7g5-wdt.patch
deleted file mode 100644
index b79ccadf9220..000000000000
--- a/target/linux/at91/patches-5.10/189-watchdog-sama5d4_wdt-add-support-for-sama7g5-wdt.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From ff83cc9f95aaba75991210312061b7fe52aaa400 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Thu, 27 May 2021 13:01:19 +0300
-Subject: [PATCH 189/247] watchdog: sama5d4_wdt: add support for sama7g5-wdt
-
-Add support for compatible sama7g5-wdt.
-The sama7g5 wdt is the same hardware block as on sam9x60.
-Adapt the driver to use the sam9x60/sama7g5 variant if either
-of the two compatibles are selected (sam9x60-wdt/sama7g5-wdt).
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Link: https://lore.kernel.org/r/20210527100120.266796-2-eugen.hristev@microchip.com
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
----
- drivers/watchdog/sama5d4_wdt.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
---- a/drivers/watchdog/sama5d4_wdt.c
-+++ b/drivers/watchdog/sama5d4_wdt.c
-@@ -268,8 +268,10 @@ static int sama5d4_wdt_probe(struct plat
- 	wdd->min_timeout = MIN_WDT_TIMEOUT;
- 	wdd->max_timeout = MAX_WDT_TIMEOUT;
- 	wdt->last_ping = jiffies;
--	wdt->sam9x60_support = of_device_is_compatible(dev->of_node,
--						       "microchip,sam9x60-wdt");
-+
-+	if (of_device_is_compatible(dev->of_node, "microchip,sam9x60-wdt") ||
-+	    of_device_is_compatible(dev->of_node, "microchip,sama7g5-wdt"))
-+		wdt->sam9x60_support = true;
- 
- 	watchdog_set_drvdata(wdd, wdt);
- 
-@@ -329,6 +331,10 @@ static const struct of_device_id sama5d4
- 	{
- 		.compatible = "microchip,sam9x60-wdt",
- 	},
-+	{
-+		.compatible = "microchip,sama7g5-wdt",
-+	},
-+
- 	{ }
- };
- MODULE_DEVICE_TABLE(of, sama5d4_wdt_of_match);
diff --git a/target/linux/at91/patches-5.10/190-media-atmel-fix-build-when-ISC-m-and-XISC-y.patch b/target/linux/at91/patches-5.10/190-media-atmel-fix-build-when-ISC-m-and-XISC-y.patch
deleted file mode 100644
index 60b410444287..000000000000
--- a/target/linux/at91/patches-5.10/190-media-atmel-fix-build-when-ISC-m-and-XISC-y.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From dfcc0395f5e838c0b5c3fb93c9335b6a8892178a Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Mon, 5 Jul 2021 14:57:08 +0200
-Subject: [PATCH 190/247] media: atmel: fix build when ISC=m and XISC=y
-
-Building VIDEO_ATMEL_ISC as module and VIDEO_ATMEL_XISC as built-in
-(or viceversa) causes build errors:
-
- or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o: in function `isc_async_complete':
- atmel-isc-base.c:(.text+0x40d0): undefined reference to `__this_module'
- or1k-linux-ld: atmel-isc-base.c:(.text+0x40f0): undefined reference to `__this_module'
- or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o:(.rodata+0x390): undefined reference to `__this_module'
- or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o:(__param+0x4): undefined reference to `__this_module'
- or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o:(__param+0x18): undefined reference to `__this_module'
-
-This is caused by the file atmel-isc-base.c which is common code between
-the two drivers.
-
-The solution is to create another Kconfig symbol that is automatically
-selected and generates the module atmel-isc-base.ko. This module can be
-loaded when both drivers are modules, or built-in when at least one of them
-is built-in.
-
-Reported-by: kernel test robot <lkp@intel.com>
-Fixes: c9aa973884a1 ("media: atmel: atmel-isc: add microchip-xisc driver")
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- drivers/media/platform/atmel/Kconfig          |  8 ++++++++
- drivers/media/platform/atmel/Makefile         |  5 +++--
- drivers/media/platform/atmel/atmel-isc-base.c | 11 +++++++++++
- 3 files changed, 22 insertions(+), 2 deletions(-)
-
---- a/drivers/media/platform/atmel/Kconfig
-+++ b/drivers/media/platform/atmel/Kconfig
-@@ -8,6 +8,7 @@ config VIDEO_ATMEL_ISC
- 	select VIDEOBUF2_DMA_CONTIG
- 	select REGMAP_MMIO
- 	select V4L2_FWNODE
-+	select VIDEO_ATMEL_ISC_BASE
- 	help
- 	   This module makes the ATMEL Image Sensor Controller available
- 	   as a v4l2 device.
-@@ -19,10 +20,17 @@ config VIDEO_ATMEL_XISC
- 	select VIDEOBUF2_DMA_CONTIG
- 	select REGMAP_MMIO
- 	select V4L2_FWNODE
-+	select VIDEO_ATMEL_ISC_BASE
- 	help
- 	   This module makes the ATMEL eXtended Image Sensor Controller
- 	   available as a v4l2 device.
- 
-+config VIDEO_ATMEL_ISC_BASE
-+	tristate
-+	default n
-+	help
-+	  ATMEL ISC and XISC common code base.
-+
- config VIDEO_ATMEL_ISI
- 	tristate "ATMEL Image Sensor Interface (ISI) support"
- 	depends on VIDEO_V4L2 && OF
---- a/drivers/media/platform/atmel/Makefile
-+++ b/drivers/media/platform/atmel/Makefile
-@@ -1,7 +1,8 @@
- # SPDX-License-Identifier: GPL-2.0-only
--atmel-isc-objs = atmel-sama5d2-isc.o atmel-isc-base.o
--atmel-xisc-objs = atmel-sama7g5-isc.o atmel-isc-base.o
-+atmel-isc-objs = atmel-sama5d2-isc.o
-+atmel-xisc-objs = atmel-sama7g5-isc.o
- 
- obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
-+obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-base.o
- obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel-isc.o
- obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel-xisc.o
---- a/drivers/media/platform/atmel/atmel-isc-base.c
-+++ b/drivers/media/platform/atmel/atmel-isc-base.c
-@@ -378,6 +378,7 @@ int isc_clk_init(struct isc_device *isc)
- 
- 	return 0;
- }
-+EXPORT_SYMBOL_GPL(isc_clk_init);
- 
- void isc_clk_cleanup(struct isc_device *isc)
- {
-@@ -392,6 +393,7 @@ void isc_clk_cleanup(struct isc_device *
- 			clk_unregister(isc_clk->clk);
- 	}
- }
-+EXPORT_SYMBOL_GPL(isc_clk_cleanup);
- 
- static int isc_queue_setup(struct vb2_queue *vq,
- 			    unsigned int *nbuffers, unsigned int *nplanes,
-@@ -1575,6 +1577,7 @@ irqreturn_t isc_interrupt(int irq, void
- 
- 	return ret;
- }
-+EXPORT_SYMBOL_GPL(isc_interrupt);
- 
- static void isc_hist_count(struct isc_device *isc, u32 *min, u32 *max)
- {
-@@ -2209,6 +2212,7 @@ const struct v4l2_async_notifier_operati
- 	.unbind = isc_async_unbind,
- 	.complete = isc_async_complete,
- };
-+EXPORT_SYMBOL_GPL(isc_async_ops);
- 
- void isc_subdev_cleanup(struct isc_device *isc)
- {
-@@ -2221,6 +2225,7 @@ void isc_subdev_cleanup(struct isc_devic
- 
- 	INIT_LIST_HEAD(&isc->subdev_entities);
- }
-+EXPORT_SYMBOL_GPL(isc_subdev_cleanup);
- 
- int isc_pipeline_init(struct isc_device *isc)
- {
-@@ -2261,6 +2266,7 @@ int isc_pipeline_init(struct isc_device
- 
- 	return 0;
- }
-+EXPORT_SYMBOL_GPL(isc_pipeline_init);
- 
- /* regmap configuration */
- #define ATMEL_ISC_REG_MAX    0xd5c
-@@ -2270,4 +2276,9 @@ const struct regmap_config isc_regmap_co
- 	.val_bits       = 32,
- 	.max_register	= ATMEL_ISC_REG_MAX,
- };
-+EXPORT_SYMBOL_GPL(isc_regmap_config);
- 
-+MODULE_AUTHOR("Songjun Wu");
-+MODULE_AUTHOR("Eugen Hristev");
-+MODULE_DESCRIPTION("Atmel ISC common code base");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/at91/patches-5.10/191-i2c-at91-remove-define-CONFIG_PM.patch b/target/linux/at91/patches-5.10/191-i2c-at91-remove-define-CONFIG_PM.patch
deleted file mode 100644
index 27ee1b6d1980..000000000000
--- a/target/linux/at91/patches-5.10/191-i2c-at91-remove-define-CONFIG_PM.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 023a6b46536dce41f2c5a7425826fc4da4509b8f Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 5 Jul 2021 15:15:16 +0300
-Subject: [PATCH 191/247] i2c: at91: remove #define CONFIG_PM
-
-Remove #define CONFIG_PM and use __maybe_unused for PM functions and
-pm_ptr() for PM ops.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Signed-off-by: Wolfram Sang <wsa@kernel.org>
----
- drivers/i2c/busses/i2c-at91-core.c | 17 +++++------------
- 1 file changed, 5 insertions(+), 12 deletions(-)
-
---- a/drivers/i2c/busses/i2c-at91-core.c
-+++ b/drivers/i2c/busses/i2c-at91-core.c
-@@ -286,9 +286,7 @@ static int at91_twi_remove(struct platfo
- 	return 0;
- }
- 
--#ifdef CONFIG_PM
--
--static int at91_twi_runtime_suspend(struct device *dev)
-+static int __maybe_unused at91_twi_runtime_suspend(struct device *dev)
- {
- 	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
- 
-@@ -299,7 +297,7 @@ static int at91_twi_runtime_suspend(stru
- 	return 0;
- }
- 
--static int at91_twi_runtime_resume(struct device *dev)
-+static int __maybe_unused at91_twi_runtime_resume(struct device *dev)
- {
- 	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
- 
-@@ -308,7 +306,7 @@ static int at91_twi_runtime_resume(struc
- 	return clk_prepare_enable(twi_dev->clk);
- }
- 
--static int at91_twi_suspend_noirq(struct device *dev)
-+static int __maybe_unused at91_twi_suspend_noirq(struct device *dev)
- {
- 	if (!pm_runtime_status_suspended(dev))
- 		at91_twi_runtime_suspend(dev);
-@@ -316,7 +314,7 @@ static int at91_twi_suspend_noirq(struct
- 	return 0;
- }
- 
--static int at91_twi_resume_noirq(struct device *dev)
-+static int __maybe_unused at91_twi_resume_noirq(struct device *dev)
- {
- 	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
- 	int ret;
-@@ -342,11 +340,6 @@ static const struct dev_pm_ops at91_twi_
- 	.runtime_resume		= at91_twi_runtime_resume,
- };
- 
--#define at91_twi_pm_ops (&at91_twi_pm)
--#else
--#define at91_twi_pm_ops NULL
--#endif
--
- static struct platform_driver at91_twi_driver = {
- 	.probe		= at91_twi_probe,
- 	.remove		= at91_twi_remove,
-@@ -354,7 +347,7 @@ static struct platform_driver at91_twi_d
- 	.driver		= {
- 		.name	= "at91_i2c",
- 		.of_match_table = of_match_ptr(atmel_twi_dt_ids),
--		.pm	= at91_twi_pm_ops,
-+		.pm	= pm_ptr(&at91_twi_pm),
- 	},
- };
- 
diff --git a/target/linux/at91/patches-5.10/192-ASoC-codecs-ad193x-add-support-for-96kHz-and-192kHz-.patch b/target/linux/at91/patches-5.10/192-ASoC-codecs-ad193x-add-support-for-96kHz-and-192kHz-.patch
deleted file mode 100644
index 6220c1dab294..000000000000
--- a/target/linux/at91/patches-5.10/192-ASoC-codecs-ad193x-add-support-for-96kHz-and-192kHz-.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 1c906a59a60887e1b997ebab63f19f33a1c69a3e Mon Sep 17 00:00:00 2001
-From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Date: Tue, 3 Aug 2021 13:48:25 +0300
-Subject: [PATCH 192/247] ASoC: codecs: ad193x: add support for 96kHz and
- 192kHz playback rates
-
-ad193x devices support 96KHz and 192KHz sampling rates, when PLL/MCLK is
-referenced to 48kHz.
-Tested on ad1934.
-
-Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-Link: https://lore.kernel.org/r/20210803104825.2198335-1-codrin.ciubotariu@microchip.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/codecs/ad193x.c | 30 ++++++++++++++++++++++++++++--
- sound/soc/codecs/ad193x.h |  4 ++++
- 2 files changed, 32 insertions(+), 2 deletions(-)
-
---- a/sound/soc/codecs/ad193x.c
-+++ b/sound/soc/codecs/ad193x.c
-@@ -316,6 +316,13 @@ static int ad193x_hw_params(struct snd_p
- 	int word_len = 0, master_rate = 0;
- 	struct snd_soc_component *component = dai->component;
- 	struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(component);
-+	bool is_playback = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
-+	u8 dacc0;
-+
-+	dev_dbg(dai->dev, "%s() rate=%u format=%#x width=%u channels=%u\n",
-+		__func__, params_rate(params), params_format(params),
-+		params_width(params), params_channels(params));
-+
- 
- 	/* bit size */
- 	switch (params_width(params)) {
-@@ -346,6 +353,25 @@ static int ad193x_hw_params(struct snd_p
- 		break;
- 	}
- 
-+	if (is_playback) {
-+		switch (params_rate(params)) {
-+		case 48000:
-+			dacc0 = AD193X_DAC_SR_48;
-+			break;
-+		case 96000:
-+			dacc0 = AD193X_DAC_SR_96;
-+			break;
-+		case 192000:
-+			dacc0 = AD193X_DAC_SR_192;
-+			break;
-+		default:
-+			dev_err(dai->dev, "invalid sampling rate: %d\n", params_rate(params));
-+			return -EINVAL;
-+		}
-+
-+		regmap_update_bits(ad193x->regmap, AD193X_DAC_CTRL0, AD193X_DAC_SR_MASK, dacc0);
-+	}
-+
- 	regmap_update_bits(ad193x->regmap, AD193X_PLL_CLK_CTRL0,
- 			    AD193X_PLL_INPUT_MASK, master_rate);
- 
-@@ -385,7 +411,7 @@ static struct snd_soc_dai_driver ad193x_
- 		.stream_name = "Playback",
- 		.channels_min = 2,
- 		.channels_max = 8,
--		.rates = SNDRV_PCM_RATE_48000,
-+		.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000,
- 		.formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
- 			SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
- 	},
-@@ -407,7 +433,7 @@ static struct snd_soc_dai_driver ad193x_
- 		.stream_name = "Playback",
- 		.channels_min = 2,
- 		.channels_max = 8,
--		.rates = SNDRV_PCM_RATE_48000,
-+		.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000,
- 		.formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
- 			SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
- 	},
---- a/sound/soc/codecs/ad193x.h
-+++ b/sound/soc/codecs/ad193x.h
-@@ -37,6 +37,10 @@ int ad193x_probe(struct device *dev, str
- #define AD193X_PLL_CLK_SRC_MCLK	(1 << 1)
- #define AD193X_DAC_CTRL0        0x02
- #define AD193X_DAC_POWERDOWN           0x01
-+#define AD193X_DAC_SR_MASK           0x06
-+#define AD193X_DAC_SR_48	(0 << 1)
-+#define AD193X_DAC_SR_96	(1 << 1)
-+#define AD193X_DAC_SR_192	(2 << 1)
- #define AD193X_DAC_SERFMT_MASK		0xC0
- #define AD193X_DAC_SERFMT_STEREO	(0 << 6)
- #define AD193X_DAC_SERFMT_TDM		(1 << 6)
diff --git a/target/linux/at91/patches-5.10/193-media-atmel-atmel-sama5d2-isc-fix-YUYV-format.patch b/target/linux/at91/patches-5.10/193-media-atmel-atmel-sama5d2-isc-fix-YUYV-format.patch
deleted file mode 100644
index a554a288a517..000000000000
--- a/target/linux/at91/patches-5.10/193-media-atmel-atmel-sama5d2-isc-fix-YUYV-format.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 21261e30679118b96ed537d1cdf9e12682fc1b29 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Wed, 9 Jun 2021 15:00:28 +0200
-Subject: [PATCH 193/247] media: atmel: atmel-sama5d2-isc: fix YUYV format
-
-SAMA5D2 does not have the YCYC field for the RLP (rounding, limiting,
-packaging) module.
-The YCYC field is supposed to work with interleaved YUV formats like YUYV.
-In SAMA5D2, we have to use YYCC field, which is used for both planar
-formats like YUV420 and interleaved formats like YUYV.
-Fix the according rlp callback to replace the generic YCYC field (which
-makes more sense from a logical point of view) with the required YYCC
-field.
-
-Fixes: debfa496871c ("media: atmel: atmel-isc-base: add support for more formats and additional pipeline modules")
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
----
- .../media/platform/atmel/atmel-sama5d2-isc.c    | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
-@@ -255,6 +255,23 @@ static void isc_sama5d2_config_rlp(struc
- 	struct regmap *regmap = isc->regmap;
- 	u32 rlp_mode = isc->config.rlp_cfg_mode;
- 
-+	/*
-+	 * In sama5d2, the YUV planar modes and the YUYV modes are treated
-+	 * in the same way in RLP register.
-+	 * Normally, YYCC mode should be Luma(n) - Color B(n) - Color R (n)
-+	 * and YCYC should be Luma(n + 1) - Color B (n) - Luma (n) - Color R (n)
-+	 * but in sama5d2, the YCYC mode does not exist, and YYCC must be
-+	 * selected for both planar and interleaved modes, as in fact
-+	 * both modes are supported.
-+	 *
-+	 * Thus, if the YCYC mode is selected, replace it with the
-+	 * sama5d2-compliant mode which is YYCC .
-+	 */
-+	if ((rlp_mode & ISC_RLP_CFG_MODE_YCYC) == ISC_RLP_CFG_MODE_YCYC) {
-+		rlp_mode &= ~ISC_RLP_CFG_MODE_MASK;
-+		rlp_mode |= ISC_RLP_CFG_MODE_YYCC;
-+	}
-+
- 	regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
- 			   ISC_RLP_CFG_MODE_MASK, rlp_mode);
- }
diff --git a/target/linux/at91/patches-5.10/194-clk-at91-add-register-definition-for-sama7g5-s-maste.patch b/target/linux/at91/patches-5.10/194-clk-at91-add-register-definition-for-sama7g5-s-maste.patch
deleted file mode 100644
index dd221f5be92e..000000000000
--- a/target/linux/at91/patches-5.10/194-clk-at91-add-register-definition-for-sama7g5-s-maste.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 602f85ff15d45bd313f8f6600d72202a50fd83a9 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 19 Jul 2021 11:03:17 +0300
-Subject: [PATCH 194/247] clk: at91: add register definition for sama7g5's
- master clock
-
-Add register definitions for SAMA7G5's master clock. These would be
-also used by architecture specific power saving code.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210719080317.1045832-3-claudiu.beznea@microchip.com
----
- include/linux/clk/at91_pmc.h | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/include/linux/clk/at91_pmc.h
-+++ b/include/linux/clk/at91_pmc.h
-@@ -137,6 +137,32 @@
- #define			AT91_PMC_PLLADIV2_ON		(1 << 12)
- #define		AT91_PMC_H32MXDIV	BIT(24)
- 
-+#define	AT91_PMC_MCR_V2		0x30				/* Master Clock Register [SAMA7G5 only] */
-+#define		AT91_PMC_MCR_V2_ID_MSK	(0xF)
-+#define			AT91_PMC_MCR_V2_ID(_id)		((_id) & AT91_PMC_MCR_V2_ID_MSK)
-+#define		AT91_PMC_MCR_V2_CMD	(1 << 7)
-+#define		AT91_PMC_MCR_V2_DIV	(7 << 8)
-+#define			AT91_PMC_MCR_V2_DIV1		(0 << 8)
-+#define			AT91_PMC_MCR_V2_DIV2		(1 << 8)
-+#define			AT91_PMC_MCR_V2_DIV4		(2 << 8)
-+#define			AT91_PMC_MCR_V2_DIV8		(3 << 8)
-+#define			AT91_PMC_MCR_V2_DIV16		(4 << 8)
-+#define			AT91_PMC_MCR_V2_DIV32		(5 << 8)
-+#define			AT91_PMC_MCR_V2_DIV64		(6 << 8)
-+#define			AT91_PMC_MCR_V2_DIV3		(7 << 8)
-+#define		AT91_PMC_MCR_V2_CSS	(0x1F << 16)
-+#define			AT91_PMC_MCR_V2_CSS_MD_SLCK	(0 << 16)
-+#define			AT91_PMC_MCR_V2_CSS_TD_SLCK	(1 << 16)
-+#define			AT91_PMC_MCR_V2_CSS_MAINCK	(2 << 16)
-+#define			AT91_PMC_MCR_V2_CSS_MCK0	(3 << 16)
-+#define			AT91_PMC_MCR_V2_CSS_SYSPLL	(5 << 16)
-+#define			AT91_PMC_MCR_V2_CSS_DDRPLL	(6 << 16)
-+#define			AT91_PMC_MCR_V2_CSS_IMGPLL	(7 << 16)
-+#define			AT91_PMC_MCR_V2_CSS_BAUDPLL	(8 << 16)
-+#define			AT91_PMC_MCR_V2_CSS_AUDIOPLL	(9 << 16)
-+#define			AT91_PMC_MCR_V2_CSS_ETHPLL	(10 << 16)
-+#define		AT91_PMC_MCR_V2_EN	(1 << 28)
-+
- #define AT91_PMC_XTALF		0x34			/* Main XTAL Frequency Register [SAMA7G5 only] */
- 
- #define	AT91_PMC_USB		0x38			/* USB Clock Register [some SAM9 only] */
diff --git a/target/linux/at91/patches-5.10/195-ARM-at91-add-new-SoC-sama7g5.patch b/target/linux/at91/patches-5.10/195-ARM-at91-add-new-SoC-sama7g5.patch
deleted file mode 100644
index 1d6b45ac94a6..000000000000
--- a/target/linux/at91/patches-5.10/195-ARM-at91-add-new-SoC-sama7g5.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 32bac6971d0572f67758f9a8c8af7bf4592f1675 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Fri, 9 Apr 2021 14:31:15 +0300
-Subject: [PATCH 195/247] ARM: at91: add new SoC sama7g5
-
-Add new SoC from at91 family : sama7g5
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-[claudiu.beznea@microchip.com: Select PLL, generic clock and UTMI support, add PM configs]
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210409113116.482199-1-eugen.hristev@microchip.com
-Link: https://lore.kernel.org/r/20210719080317.1045832-2-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/Kconfig | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/arm/mach-at91/Kconfig
-+++ b/arch/arm/mach-at91/Kconfig
-@@ -57,6 +57,16 @@ config SOC_SAMA5D4
- 	help
- 	  Select this if you are using one of Microchip's SAMA5D4 family SoC.
- 
-+config SOC_SAMA7G5
-+	bool "SAMA7G5 family"
-+	depends on ARCH_MULTI_V7
-+	select HAVE_AT91_GENERATED_CLK
-+	select HAVE_AT91_SAM9X60_PLL
-+	select HAVE_AT91_UTMI
-+	select SOC_SAMA7
-+	help
-+	  Select this if you are using one of Microchip's SAMA7G5 family SoC.
-+
- config SOC_AT91RM9200
- 	bool "AT91RM9200"
- 	depends on ARCH_MULTI_V4T
-@@ -191,4 +201,12 @@ config SOC_SAMA5
- config ATMEL_PM
- 	bool
- 
-+config SOC_SAMA7
-+	bool
-+	select ARM_GIC
-+	select ATMEL_PM if PM
-+	select ATMEL_SDRAMC
-+	select MEMORY
-+	select SOC_SAM_V7
-+	select SRAM if PM
- endif
diff --git a/target/linux/at91/patches-5.10/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch b/target/linux/at91/patches-5.10/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch
deleted file mode 100644
index c99a2d5219bb..000000000000
--- a/target/linux/at91/patches-5.10/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 3de4879bf59b46a966ea226a67df70b88f43a23e Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Fri, 9 Apr 2021 14:31:16 +0300
-Subject: [PATCH 196/247] ARM: at91: debug: add sama7g5 low level debug uart
-
-Add sama7g5 SoC debug uart on Flexcom3. This is the UART that the
-ROM bootloader uses.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210409113116.482199-2-eugen.hristev@microchip.com
-[claudiu.beznea: adapt to v5.10.27]
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
----
- arch/arm/Kconfig.debug | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/Kconfig.debug
-+++ b/arch/arm/Kconfig.debug
-@@ -191,6 +191,14 @@ choice
- 		  their output to the USART1 port on SAMV7 based
- 		  machines.
- 
-+	config DEBUG_AT91_SAMA7G5_FLEXCOM3
-+		bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3"
-+		select DEBUG_AT91_UART
-+		depends on SOC_SAMA7G5
-+		help
-+		  Say Y here if you want kernel low-level debugging support
-+		  on the FLEXCOM3 port of SAMA7G5.
-+
- 	config DEBUG_BCM2835
- 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
- 		depends on ARCH_BCM2835 && ARCH_MULTI_V6
-@@ -1731,6 +1739,7 @@ config DEBUG_UART_PHYS
- 	default 0xd4017000 if DEBUG_MMP_UART2
- 	default 0xd4018000 if DEBUG_MMP_UART3
- 	default 0xe0000000 if DEBUG_SPEAR13XX
-+	default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
- 	default 0xe4007000 if DEBUG_HIP04_UART
- 	default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
- 	default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
-@@ -1791,6 +1800,7 @@ config DEBUG_UART_VIRT
- 	default 0xc8912000 if DEBUG_RV1108_UART0
- 	default 0xe0010fe0 if ARCH_RPC
- 	default 0xf0000be0 if ARCH_EBSA110
-+	default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
- 	default 0xf0010000 if DEBUG_ASM9260_UART
- 	default 0xf0100000 if DEBUG_DIGICOLOR_UA0
- 	default 0xf01fb000 if DEBUG_NOMADIK_UART
diff --git a/target/linux/at91/patches-5.10/197-ARM-at91-pm-move-pm_bu-to-soc_pm-data-structure.patch b/target/linux/at91/patches-5.10/197-ARM-at91-pm-move-pm_bu-to-soc_pm-data-structure.patch
deleted file mode 100644
index dfd47d55d263..000000000000
--- a/target/linux/at91/patches-5.10/197-ARM-at91-pm-move-pm_bu-to-soc_pm-data-structure.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From e41d00bdaa31b36fd314e927104082615aa4643a Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:47 +0300
-Subject: [PATCH 197/247] ARM: at91: pm: move pm_bu to soc_pm data structure
-
-Move pm_bu to soc_pm data structure.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-2-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c | 34 +++++++++++++++++++++-------------
- 1 file changed, 21 insertions(+), 13 deletions(-)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -27,10 +27,25 @@
- #include "generic.h"
- #include "pm.h"
- 
-+/**
-+ * struct at91_pm_bu - AT91 power management backup unit data structure
-+ * @suspended: true if suspended to backup mode
-+ * @reserved: reserved
-+ * @canary: canary data for memory checking after exit from backup mode
-+ * @resume: resume API
-+ */
-+struct at91_pm_bu {
-+	int suspended;
-+	unsigned long reserved;
-+	phys_addr_t canary;
-+	phys_addr_t resume;
-+};
-+
- struct at91_soc_pm {
- 	int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
- 	int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
- 	const struct of_device_id *ws_ids;
-+	struct at91_pm_bu *bu;
- 	struct at91_pm_data data;
- };
- 
-@@ -71,13 +86,6 @@ static int at91_pm_valid_state(suspend_s
- 
- static int canary = 0xA5A5A5A5;
- 
--static struct at91_pm_bu {
--	int suspended;
--	unsigned long reserved;
--	phys_addr_t canary;
--	phys_addr_t resume;
--} *pm_bu;
--
- struct wakeup_source_info {
- 	unsigned int pmc_fsmr_bit;
- 	unsigned int shdwc_mr_bit;
-@@ -288,7 +296,7 @@ static int at91_suspend_finish(unsigned
- static void at91_pm_suspend(suspend_state_t state)
- {
- 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
--		pm_bu->suspended = 1;
-+		soc_pm.bu->suspended = 1;
- 
- 		cpu_suspend(0, at91_suspend_finish);
- 
-@@ -672,16 +680,16 @@ static int __init at91_pm_backup_init(vo
- 		goto securam_fail;
- 	}
- 
--	pm_bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu));
--	if (!pm_bu) {
-+	soc_pm.bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu));
-+	if (!soc_pm.bu) {
- 		pr_warn("%s: unable to alloc securam!\n", __func__);
- 		ret = -ENOMEM;
- 		goto securam_fail;
- 	}
- 
--	pm_bu->suspended = 0;
--	pm_bu->canary = __pa_symbol(&canary);
--	pm_bu->resume = __pa_symbol(cpu_resume);
-+	soc_pm.bu->suspended = 0;
-+	soc_pm.bu->canary = __pa_symbol(&canary);
-+	soc_pm.bu->resume = __pa_symbol(cpu_resume);
- 
- 	return 0;
- 
diff --git a/target/linux/at91/patches-5.10/198-ARM-at91-pm-move-the-setup-of-soc_pm.bu-suspended.patch b/target/linux/at91/patches-5.10/198-ARM-at91-pm-move-the-setup-of-soc_pm.bu-suspended.patch
deleted file mode 100644
index 5b484b7343d9..000000000000
--- a/target/linux/at91/patches-5.10/198-ARM-at91-pm-move-the-setup-of-soc_pm.bu-suspended.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From c8f2a8aaae41fa0a40ad88855ae82696098230d7 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:48 +0300
-Subject: [PATCH 198/247] ARM: at91: pm: move the setup of soc_pm.bu->suspended
-
-Move the setup of soc_pm.bu->suspended in platform_suspend::begin
-function so that the PMC code in charge with clocks suspend/resume
-to differentiate b/w standard PM mode and backup mode.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-3-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c | 15 ++++++++++++---
- 1 file changed, 12 insertions(+), 3 deletions(-)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -214,6 +214,8 @@ static int at91_sam9x60_config_pmc_ws(vo
-  */
- static int at91_pm_begin(suspend_state_t state)
- {
-+	int ret;
-+
- 	switch (state) {
- 	case PM_SUSPEND_MEM:
- 		soc_pm.data.mode = soc_pm.data.suspend_mode;
-@@ -227,7 +229,16 @@ static int at91_pm_begin(suspend_state_t
- 		soc_pm.data.mode = -1;
- 	}
- 
--	return at91_pm_config_ws(soc_pm.data.mode, true);
-+	ret = at91_pm_config_ws(soc_pm.data.mode, true);
-+	if (ret)
-+		return ret;
-+
-+	if (soc_pm.data.mode == AT91_PM_BACKUP)
-+		soc_pm.bu->suspended = 1;
-+	else if (soc_pm.bu)
-+		soc_pm.bu->suspended = 0;
-+
-+	return 0;
- }
- 
- /*
-@@ -296,8 +307,6 @@ static int at91_suspend_finish(unsigned
- static void at91_pm_suspend(suspend_state_t state)
- {
- 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
--		soc_pm.bu->suspended = 1;
--
- 		cpu_suspend(0, at91_suspend_finish);
- 
- 		/* The SRAM is lost between suspend cycles */
diff --git a/target/linux/at91/patches-5.10/199-ARM-at91-pm-document-at91_soc_pm-structure.patch b/target/linux/at91/patches-5.10/199-ARM-at91-pm-document-at91_soc_pm-structure.patch
deleted file mode 100644
index 965555a11d0b..000000000000
--- a/target/linux/at91/patches-5.10/199-ARM-at91-pm-document-at91_soc_pm-structure.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 59a4b3b9381b727f416d9cc52e60d0bc7d93ecae Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:49 +0300
-Subject: [PATCH 199/247] ARM: at91: pm: document at91_soc_pm structure
-
-Document at91_soc_pm structure.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-4-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -41,6 +41,14 @@ struct at91_pm_bu {
- 	phys_addr_t resume;
- };
- 
-+/**
-+ * struct at91_soc_pm - AT91 SoC power management data structure
-+ * @config_shdwc_ws: wakeup sources configuration function for SHDWC
-+ * @config_pmc_ws: wakeup srouces configuration function for PMC
-+ * @ws_ids: wakup sources of_device_id array
-+ * @data: PM data to be used on last phase of suspend
-+ * @bu: backup unit mapped data (for backup mode)
-+ */
- struct at91_soc_pm {
- 	int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
- 	int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
diff --git a/target/linux/at91/patches-5.10/200-ARM-at91-pm-check-for-different-controllers-in-at91_.patch b/target/linux/at91/patches-5.10/200-ARM-at91-pm-check-for-different-controllers-in-at91_.patch
deleted file mode 100644
index f15095aafdbe..000000000000
--- a/target/linux/at91/patches-5.10/200-ARM-at91-pm-check-for-different-controllers-in-at91_.patch
+++ /dev/null
@@ -1,238 +0,0 @@
-From 0c4cbd38a705bdeab11de4c84ad0ce8c3de8a81d Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:50 +0300
-Subject: [PATCH 200/247] ARM: at91: pm: check for different controllers in
- at91_pm_modes_init()
-
-at91_pm_modes_init() checks for proper nodes in device tree and maps
-them accordingly. Up to SAMA7G5 all AT91 SoCs had the same mapping
-b/w power saving modes and different controllers needed in the
-final/first steps of suspend/resume. SAMA7G5 is not aligned with the
-old SoCs thus the code is adapted for this. This patch prepares
-the field for next commits.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-5-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c | 143 +++++++++++++++++++++++++---------------
- 1 file changed, 91 insertions(+), 52 deletions(-)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -57,6 +57,18 @@ struct at91_soc_pm {
- 	struct at91_pm_data data;
- };
- 
-+/**
-+ * enum at91_pm_iomaps:	IOs that needs to be mapped for different PM modes
-+ * @AT91_PM_IOMAP_SHDWC:	SHDWC controller
-+ * @AT91_PM_IOMAP_SFRBU:	SFRBU controller
-+ */
-+enum at91_pm_iomaps {
-+	AT91_PM_IOMAP_SHDWC,
-+	AT91_PM_IOMAP_SFRBU,
-+};
-+
-+#define AT91_PM_IOMAP(name)	BIT(AT91_PM_IOMAP_##name)
-+
- static struct at91_soc_pm soc_pm = {
- 	.data = {
- 		.standby_mode = AT91_PM_STANDBY,
-@@ -671,24 +683,15 @@ static int __init at91_pm_backup_init(vo
- 	if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
- 		return 0;
- 
--	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
--	if (!np) {
--		pr_warn("%s: failed to find sfrbu!\n", __func__);
--		return ret;
--	}
--
--	soc_pm.data.sfrbu = of_iomap(np, 0);
--	of_node_put(np);
--
- 	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
- 	if (!np)
--		goto securam_fail_no_ref_dev;
-+		return ret;
- 
- 	pdev = of_find_device_by_node(np);
- 	of_node_put(np);
- 	if (!pdev) {
- 		pr_warn("%s: failed to find securam device!\n", __func__);
--		goto securam_fail_no_ref_dev;
-+		return ret;
- 	}
- 
- 	sram_pool = gen_pool_get(&pdev->dev, NULL);
-@@ -712,64 +715,92 @@ static int __init at91_pm_backup_init(vo
- 
- securam_fail:
- 	put_device(&pdev->dev);
--securam_fail_no_ref_dev:
--	iounmap(soc_pm.data.sfrbu);
--	soc_pm.data.sfrbu = NULL;
- 	return ret;
- }
- 
--static void __init at91_pm_use_default_mode(int pm_mode)
--{
--	if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP)
--		return;
--
--	if (soc_pm.data.standby_mode == pm_mode)
--		soc_pm.data.standby_mode = AT91_PM_ULP0;
--	if (soc_pm.data.suspend_mode == pm_mode)
--		soc_pm.data.suspend_mode = AT91_PM_ULP0;
--}
--
- static const struct of_device_id atmel_shdwc_ids[] = {
- 	{ .compatible = "atmel,sama5d2-shdwc" },
- 	{ .compatible = "microchip,sam9x60-shdwc" },
- 	{ /* sentinel. */ }
- };
- 
--static void __init at91_pm_modes_init(void)
-+static void __init at91_pm_modes_init(const u32 *maps, int len)
- {
- 	struct device_node *np;
--	int ret;
-+	int ret, mode;
- 
--	if (!at91_is_pm_mode_active(AT91_PM_BACKUP) &&
--	    !at91_is_pm_mode_active(AT91_PM_ULP1))
--		return;
-+	ret = at91_pm_backup_init();
-+	if (ret) {
-+		if (soc_pm.data.standby_mode == AT91_PM_BACKUP)
-+			soc_pm.data.standby_mode = AT91_PM_ULP0;
-+		if (soc_pm.data.suspend_mode == AT91_PM_BACKUP)
-+			soc_pm.data.suspend_mode = AT91_PM_ULP0;
-+	}
-+
-+	if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
-+	    maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC)) {
-+		np = of_find_matching_node(NULL, atmel_shdwc_ids);
-+		if (!np) {
-+			pr_warn("%s: failed to find shdwc!\n", __func__);
-+
-+			/* Use ULP0 if it doesn't needs SHDWC.*/
-+			if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC)))
-+				mode = AT91_PM_ULP0;
-+			else
-+				mode = AT91_PM_STANDBY;
-+
-+			if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC))
-+				soc_pm.data.standby_mode = mode;
-+			if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC))
-+				soc_pm.data.suspend_mode = mode;
-+		} else {
-+			soc_pm.data.shdwc = of_iomap(np, 0);
-+			of_node_put(np);
-+		}
-+	}
- 
--	np = of_find_matching_node(NULL, atmel_shdwc_ids);
--	if (!np) {
--		pr_warn("%s: failed to find shdwc!\n", __func__);
--		goto ulp1_default;
-+	if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) ||
-+	    maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU)) {
-+		np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
-+		if (!np) {
-+			pr_warn("%s: failed to find sfrbu!\n", __func__);
-+
-+			/*
-+			 * Use ULP0 if it doesn't need SHDWC or if SHDWC
-+			 * was already located.
-+			 */
-+			if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC)) ||
-+			    soc_pm.data.shdwc)
-+				mode = AT91_PM_ULP0;
-+			else
-+				mode = AT91_PM_STANDBY;
-+
-+			if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU))
-+				soc_pm.data.standby_mode = mode;
-+			if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU))
-+				soc_pm.data.suspend_mode = mode;
-+		} else {
-+			soc_pm.data.sfrbu = of_iomap(np, 0);
-+			of_node_put(np);
-+		}
- 	}
- 
--	soc_pm.data.shdwc = of_iomap(np, 0);
--	of_node_put(np);
-+	/* Unmap all unnecessary. */
-+	if (soc_pm.data.shdwc &&
-+	    !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
-+	      maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC))) {
-+		iounmap(soc_pm.data.shdwc);
-+		soc_pm.data.shdwc = NULL;
-+	}
- 
--	ret = at91_pm_backup_init();
--	if (ret) {
--		if (!at91_is_pm_mode_active(AT91_PM_ULP1))
--			goto unmap;
--		else
--			goto backup_default;
-+	if (soc_pm.data.sfrbu &&
-+	    !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) ||
-+	      maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU))) {
-+		iounmap(soc_pm.data.sfrbu);
-+		soc_pm.data.sfrbu = NULL;
- 	}
- 
- 	return;
--
--unmap:
--	iounmap(soc_pm.data.shdwc);
--	soc_pm.data.shdwc = NULL;
--ulp1_default:
--	at91_pm_use_default_mode(AT91_PM_ULP1);
--backup_default:
--	at91_pm_use_default_mode(AT91_PM_BACKUP);
- }
- 
- struct pmc_info {
-@@ -936,13 +967,16 @@ void __init sam9x60_pm_init(void)
- 	static const int modes[] __initconst = {
- 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
- 	};
-+	static const int iomaps[] __initconst = {
-+		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SHDWC),
-+	};
- 	int ret;
- 
- 	if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
- 		return;
- 
- 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
--	at91_pm_modes_init();
-+	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
- 	ret = at91_dt_ramc();
- 	if (ret)
- 		return;
-@@ -999,13 +1033,18 @@ void __init sama5d2_pm_init(void)
- 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
- 		AT91_PM_BACKUP,
- 	};
-+	static const u32 iomaps[] __initconst = {
-+		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SHDWC),
-+		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SHDWC) |
-+					  AT91_PM_IOMAP(SFRBU),
-+	};
- 	int ret;
- 
- 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
- 		return;
- 
- 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
--	at91_pm_modes_init();
-+	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
- 	ret = at91_dt_ramc();
- 	if (ret)
- 		return;
diff --git a/target/linux/at91/patches-5.10/201-ARM-at91-pm-do-not-initialize-pdev.patch b/target/linux/at91/patches-5.10/201-ARM-at91-pm-do-not-initialize-pdev.patch
deleted file mode 100644
index 413a95a968d7..000000000000
--- a/target/linux/at91/patches-5.10/201-ARM-at91-pm-do-not-initialize-pdev.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 31e25503bbad1fffd29fd074a46bd4858b65304f Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:51 +0300
-Subject: [PATCH 201/247] ARM: at91: pm: do not initialize pdev
-
-There is no need to initialize pdev.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-6-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -674,7 +674,7 @@ static int __init at91_pm_backup_init(vo
- {
- 	struct gen_pool *sram_pool;
- 	struct device_node *np;
--	struct platform_device *pdev = NULL;
-+	struct platform_device *pdev;
- 	int ret = -ENODEV;
- 
- 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
diff --git a/target/linux/at91/patches-5.10/202-ARM-at91-pm-use-r7-instead-of-tmp1.patch b/target/linux/at91/patches-5.10/202-ARM-at91-pm-use-r7-instead-of-tmp1.patch
deleted file mode 100644
index a313ab029a8a..000000000000
--- a/target/linux/at91/patches-5.10/202-ARM-at91-pm-use-r7-instead-of-tmp1.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 8a7a4cf3860910e460e2c3ca467b1dabf7ce9827 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:52 +0300
-Subject: [PATCH 202/247] ARM: at91: pm: use r7 instead of tmp1
-
-Use r7 instead of tmp1 in macros. This prepares the filed for
-next commits.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-7-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm_suspend.S | 18 ++++++++++++------
- 1 file changed, 12 insertions(+), 6 deletions(-)
-
---- a/arch/arm/mach-at91/pm_suspend.S
-+++ b/arch/arm/mach-at91/pm_suspend.S
-@@ -31,30 +31,36 @@ tmp3	.req	r6
- 
- /*
-  * Wait until master oscillator has stabilized.
-+ *
-+ * Side effects: overwrites r7
-  */
- 	.macro wait_moscrdy
--1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
--	tst	tmp1, #AT91_PMC_MOSCS
-+1:	ldr	r7, [pmc, #AT91_PMC_SR]
-+	tst	r7, #AT91_PMC_MOSCS
- 	beq	1b
- 	.endm
- 
- /*
-  * Wait for main oscillator selection is done
-+ *
-+ * Side effects: overwrites r7
-  */
- 	.macro wait_moscsels
--1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
--	tst	tmp1, #AT91_PMC_MOSCSELS
-+1:	ldr	r7, [pmc, #AT91_PMC_SR]
-+	tst	r7, #AT91_PMC_MOSCSELS
- 	beq	1b
- 	.endm
- 
- /*
-  * Put the processor to enter the idle state
-+ *
-+ * Side effects: overwrites r7
-  */
- 	.macro at91_cpu_idle
- 
- #if defined(CONFIG_CPU_V7)
--	mov	tmp1, #AT91_PMC_PCK
--	str	tmp1, [pmc, #AT91_PMC_SCDR]
-+	mov	r7, #AT91_PMC_PCK
-+	str	r7, [pmc, #AT91_PMC_SCDR]
- 
- 	dsb
- 
diff --git a/target/linux/at91/patches-5.10/203-ARM-at91-pm-avoid-push-and-pop-on-stack-while-memory.patch b/target/linux/at91/patches-5.10/203-ARM-at91-pm-avoid-push-and-pop-on-stack-while-memory.patch
deleted file mode 100644
index a2edec371d55..000000000000
--- a/target/linux/at91/patches-5.10/203-ARM-at91-pm-avoid-push-and-pop-on-stack-while-memory.patch
+++ /dev/null
@@ -1,467 +0,0 @@
-From 892f6d2fb9c42d4ac451236639599f533c37b507 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:53 +0300
-Subject: [PATCH 203/247] ARM: at91: pm: avoid push and pop on stack while
- memory is in self-refersh
-
-For the previous AT91 RAM controller and self-refresh procedure this
-had no side effects. However, for SAMA7G5 the self-refresh procedure
-doesn't allow this anymore as the RAM controller ports are closed
-before switching it to self-refresh. This commits prepares the code
-for the following ones adding self-refresh and PM support for SAMA7G5.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-8-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm_suspend.S | 397 +++++++++++++++++---------------
- 1 file changed, 205 insertions(+), 192 deletions(-)
-
---- a/arch/arm/mach-at91/pm_suspend.S
-+++ b/arch/arm/mach-at91/pm_suspend.S
-@@ -75,98 +75,147 @@ tmp3	.req	r6
- 
- 	.arm
- 
--/*
-- * void at91_suspend_sram_fn(struct at91_pm_data*)
-- * @input param:
-- * 	@r0: base address of struct at91_pm_data
-+/**
-+ * Enable self-refresh
-+ *
-+ * register usage:
-+ * 	@r1: memory type
-+ *	@r2: base address of the sram controller
-+ *	@r3: temporary
-  */
--/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
--	.align 3
--ENTRY(at91_pm_suspend_in_sram)
--	/* Save registers on stack */
--	stmfd	sp!, {r4 - r12, lr}
-+.macro at91_sramc_self_refresh_ena
-+	ldr	r1, .memtype
-+	ldr	r2, .sramc_base
- 
--	/* Drain write buffer */
--	mov	tmp1, #0
--	mcr	p15, 0, tmp1, c7, c10, 4
-+	cmp	r1, #AT91_MEMCTRL_MC
-+	bne	sr_ena_ddrc_sf
- 
--	ldr	tmp1, [r0, #PM_DATA_PMC]
--	str	tmp1, .pmc_base
--	ldr	tmp1, [r0, #PM_DATA_RAMC0]
--	str	tmp1, .sramc_base
--	ldr	tmp1, [r0, #PM_DATA_RAMC1]
--	str	tmp1, .sramc1_base
--	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
--	str	tmp1, .memtype
--	ldr	tmp1, [r0, #PM_DATA_MODE]
--	str	tmp1, .pm_mode
--	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
--	str	tmp1, .mckr_offset
--	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
--	str	tmp1, .pmc_version
--	/* Both ldrne below are here to preload their address in the TLB */
--	ldr	tmp1, [r0, #PM_DATA_SHDWC]
--	str	tmp1, .shdwc
--	cmp	tmp1, #0
--	ldrne	tmp2, [tmp1, #0]
--	ldr	tmp1, [r0, #PM_DATA_SFRBU]
--	str	tmp1, .sfrbu
--	cmp	tmp1, #0
--	ldrne	tmp2, [tmp1, #0x10]
-+	/* Active SDRAM self-refresh mode */
-+	mov	r3, #1
-+	str	r3, [r2, #AT91_MC_SDRAMC_SRR]
-+	b	sr_ena_exit
- 
--	/* Active the self-refresh mode */
--	mov	r0, #SRAMC_SELF_FRESH_ACTIVE
--	bl	at91_sramc_self_refresh
-+sr_ena_ddrc_sf:
-+	cmp	r1, #AT91_MEMCTRL_DDRSDR
-+	bne	sr_ena_sdramc_sf
- 
--	ldr	r0, .pm_mode
--	cmp	r0, #AT91_PM_STANDBY
--	beq	standby
--	cmp	r0, #AT91_PM_BACKUP
--	beq	backup_mode
-+	/*
-+	 * DDR Memory controller
-+	 */
- 
--	bl	at91_ulp_mode
--	b	exit_suspend
-+	/* LPDDR1 --> force DDR2 mode during self-refresh */
-+	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
-+	str	r3, .saved_sam9_mdr
-+	bic	r3, r3, #~AT91_DDRSDRC_MD
-+	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
-+	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
-+	biceq	r3, r3, #AT91_DDRSDRC_MD
-+	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
-+	streq	r3, [r2, #AT91_DDRSDRC_MDR]
- 
--standby:
--	/* Wait for interrupt */
--	ldr	pmc, .pmc_base
--	at91_cpu_idle
--	b	exit_suspend
-+	/* Active DDRC self-refresh mode */
-+	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
-+	str	r3, .saved_sam9_lpr
-+	bic	r3, r3, #AT91_DDRSDRC_LPCB
-+	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-+	str	r3, [r2, #AT91_DDRSDRC_LPR]
- 
--backup_mode:
--	bl	at91_backup_mode
--	b	exit_suspend
-+	/* If using the 2nd ddr controller */
-+	ldr	r2, .sramc1_base
-+	cmp	r2, #0
-+	beq	sr_ena_no_2nd_ddrc
- 
--exit_suspend:
--	/* Exit the self-refresh mode */
--	mov	r0, #SRAMC_SELF_FRESH_EXIT
--	bl	at91_sramc_self_refresh
-+	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
-+	str	r3, .saved_sam9_mdr1
-+	bic	r3, r3, #~AT91_DDRSDRC_MD
-+	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
-+	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
-+	biceq	r3, r3, #AT91_DDRSDRC_MD
-+	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
-+	streq	r3, [r2, #AT91_DDRSDRC_MDR]
- 
--	/* Restore registers, and return */
--	ldmfd	sp!, {r4 - r12, pc}
--ENDPROC(at91_pm_suspend_in_sram)
-+	/* Active DDRC self-refresh mode */
-+	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
-+	str	r3, .saved_sam9_lpr1
-+	bic	r3, r3, #AT91_DDRSDRC_LPCB
-+	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-+	str	r3, [r2, #AT91_DDRSDRC_LPR]
- 
--ENTRY(at91_backup_mode)
--	/* Switch the master clock source to slow clock. */
--	ldr	pmc, .pmc_base
--	ldr	tmp2, .mckr_offset
--	ldr	tmp1, [pmc, tmp2]
--	bic	tmp1, tmp1, #AT91_PMC_CSS
--	str	tmp1, [pmc, tmp2]
-+sr_ena_no_2nd_ddrc:
-+	b	sr_ena_exit
- 
--	wait_mckrdy
-+	/*
-+	 * SDRAMC Memory controller
-+	 */
-+sr_ena_sdramc_sf:
-+	/* Active SDRAMC self-refresh mode */
-+	ldr	r3, [r2, #AT91_SDRAMC_LPR]
-+	str	r3, .saved_sam9_lpr
-+	bic	r3, r3, #AT91_SDRAMC_LPCB
-+	orr	r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
-+	str	r3, [r2, #AT91_SDRAMC_LPR]
- 
--	/*BUMEN*/
--	ldr	r0, .sfrbu
--	mov	tmp1, #0x1
--	str	tmp1, [r0, #0x10]
-+	ldr	r3, .saved_sam9_lpr
-+	str	r3, [r2, #AT91_SDRAMC_LPR]
- 
--	/* Shutdown */
--	ldr	r0, .shdwc
--	mov	tmp1, #0xA5000000
--	add	tmp1, tmp1, #0x1
--	str	tmp1, [r0, #0]
--ENDPROC(at91_backup_mode)
-+sr_ena_exit:
-+.endm
-+
-+/**
-+ * Disable self-refresh
-+ *
-+ * register usage:
-+ * 	@r1: memory type
-+ *	@r2: base address of the sram controller
-+ *	@r3: temporary
-+ */
-+.macro at91_sramc_self_refresh_dis
-+	ldr	r1, .memtype
-+	ldr	r2, .sramc_base
-+
-+	cmp	r1, #AT91_MEMCTRL_MC
-+	bne	sr_dis_ddrc_exit_sf
-+
-+	/*
-+	 * at91rm9200 Memory controller
-+	 */
-+
-+	 /*
-+	  * For exiting the self-refresh mode, do nothing,
-+	  * automatically exit the self-refresh mode.
-+	  */
-+	b	sr_dis_exit
-+
-+sr_dis_ddrc_exit_sf:
-+	cmp	r1, #AT91_MEMCTRL_DDRSDR
-+	bne	sdramc_exit_sf
-+
-+	/* DDR Memory controller */
-+
-+	/* Restore MDR in case of LPDDR1 */
-+	ldr	r3, .saved_sam9_mdr
-+	str	r3, [r2, #AT91_DDRSDRC_MDR]
-+	/* Restore LPR on AT91 with DDRAM */
-+	ldr	r3, .saved_sam9_lpr
-+	str	r3, [r2, #AT91_DDRSDRC_LPR]
-+
-+	/* If using the 2nd ddr controller */
-+	ldr	r2, .sramc1_base
-+	cmp	r2, #0
-+	ldrne	r3, .saved_sam9_mdr1
-+	strne	r3, [r2, #AT91_DDRSDRC_MDR]
-+	ldrne	r3, .saved_sam9_lpr1
-+	strne	r3, [r2, #AT91_DDRSDRC_LPR]
-+
-+	b	sr_dis_exit
-+
-+sdramc_exit_sf:
-+	/* SDRAMC Memory controller */
-+	ldr	r3, .saved_sam9_lpr
-+	str	r3, [r2, #AT91_SDRAMC_LPR]
-+
-+sr_dis_exit:
-+.endm
- 
- .macro at91_pm_ulp0_mode
- 	ldr	pmc, .pmc_base
-@@ -503,7 +552,7 @@ ENDPROC(at91_backup_mode)
- 2:
- .endm
- 
--ENTRY(at91_ulp_mode)
-+.macro at91_ulp_mode
- 	ldr	pmc, .pmc_base
- 	ldr	tmp2, .mckr_offset
- 	ldr	tmp3, .pm_mode
-@@ -552,133 +601,97 @@ ulp_exit:
- 
- 	wait_mckrdy
- 
--	mov	pc, lr
--ENDPROC(at91_ulp_mode)
--
--/*
-- * void at91_sramc_self_refresh(unsigned int is_active)
-- *
-- * @input param:
-- *	@r0: 1 - active self-refresh mode
-- *	     0 - exit self-refresh mode
-- * register usage:
-- * 	@r1: memory type
-- *	@r2: base address of the sram controller
-- */
--
--ENTRY(at91_sramc_self_refresh)
--	ldr	r1, .memtype
--	ldr	r2, .sramc_base
--
--	cmp	r1, #AT91_MEMCTRL_MC
--	bne	ddrc_sf
--
--	/*
--	 * at91rm9200 Memory controller
--	 */
--
--	 /*
--	  * For exiting the self-refresh mode, do nothing,
--	  * automatically exit the self-refresh mode.
--	  */
--	tst	r0, #SRAMC_SELF_FRESH_ACTIVE
--	beq	exit_sramc_sf
--
--	/* Active SDRAM self-refresh mode */
--	mov	r3, #1
--	str	r3, [r2, #AT91_MC_SDRAMC_SRR]
--	b	exit_sramc_sf
--
--ddrc_sf:
--	cmp	r1, #AT91_MEMCTRL_DDRSDR
--	bne	sdramc_sf
-+.endm
- 
--	/*
--	 * DDR Memory controller
--	 */
--	tst	r0, #SRAMC_SELF_FRESH_ACTIVE
--	beq	ddrc_exit_sf
-+.macro at91_backup_mode
-+	/* Switch the master clock source to slow clock. */
-+	ldr	pmc, .pmc_base
-+	ldr	tmp2, .mckr_offset
-+	ldr	tmp1, [pmc, tmp2]
-+	bic	tmp1, tmp1, #AT91_PMC_CSS
-+	str	tmp1, [pmc, tmp2]
- 
--	/* LPDDR1 --> force DDR2 mode during self-refresh */
--	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
--	str	r3, .saved_sam9_mdr
--	bic	r3, r3, #~AT91_DDRSDRC_MD
--	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
--	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
--	biceq	r3, r3, #AT91_DDRSDRC_MD
--	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
--	streq	r3, [r2, #AT91_DDRSDRC_MDR]
-+	wait_mckrdy
- 
--	/* Active DDRC self-refresh mode */
--	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
--	str	r3, .saved_sam9_lpr
--	bic	r3, r3, #AT91_DDRSDRC_LPCB
--	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
--	str	r3, [r2, #AT91_DDRSDRC_LPR]
-+	/*BUMEN*/
-+	ldr	r0, .sfrbu
-+	mov	tmp1, #0x1
-+	str	tmp1, [r0, #0x10]
- 
--	/* If using the 2nd ddr controller */
--	ldr	r2, .sramc1_base
--	cmp	r2, #0
--	beq	no_2nd_ddrc
-+	/* Shutdown */
-+	ldr	r0, .shdwc
-+	mov	tmp1, #0xA5000000
-+	add	tmp1, tmp1, #0x1
-+	str	tmp1, [r0, #0]
-+.endm
- 
--	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
--	str	r3, .saved_sam9_mdr1
--	bic	r3, r3, #~AT91_DDRSDRC_MD
--	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
--	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
--	biceq	r3, r3, #AT91_DDRSDRC_MD
--	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
--	streq	r3, [r2, #AT91_DDRSDRC_MDR]
-+/*
-+ * void at91_suspend_sram_fn(struct at91_pm_data*)
-+ * @input param:
-+ * 	@r0: base address of struct at91_pm_data
-+ */
-+/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
-+	.align 3
-+ENTRY(at91_pm_suspend_in_sram)
-+	/* Save registers on stack */
-+	stmfd	sp!, {r4 - r12, lr}
- 
--	/* Active DDRC self-refresh mode */
--	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
--	str	r3, .saved_sam9_lpr1
--	bic	r3, r3, #AT91_DDRSDRC_LPCB
--	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
--	str	r3, [r2, #AT91_DDRSDRC_LPR]
-+	/* Drain write buffer */
-+	mov	tmp1, #0
-+	mcr	p15, 0, tmp1, c7, c10, 4
- 
--no_2nd_ddrc:
--	b	exit_sramc_sf
-+	ldr	tmp1, [r0, #PM_DATA_PMC]
-+	str	tmp1, .pmc_base
-+	ldr	tmp1, [r0, #PM_DATA_RAMC0]
-+	str	tmp1, .sramc_base
-+	ldr	tmp1, [r0, #PM_DATA_RAMC1]
-+	str	tmp1, .sramc1_base
-+	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
-+	str	tmp1, .memtype
-+	ldr	tmp1, [r0, #PM_DATA_MODE]
-+	str	tmp1, .pm_mode
-+	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
-+	str	tmp1, .mckr_offset
-+	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
-+	str	tmp1, .pmc_version
-+	/* Both ldrne below are here to preload their address in the TLB */
-+	ldr	tmp1, [r0, #PM_DATA_SHDWC]
-+	str	tmp1, .shdwc
-+	cmp	tmp1, #0
-+	ldrne	tmp2, [tmp1, #0]
-+	ldr	tmp1, [r0, #PM_DATA_SFRBU]
-+	str	tmp1, .sfrbu
-+	cmp	tmp1, #0
-+	ldrne	tmp2, [tmp1, #0x10]
- 
--ddrc_exit_sf:
--	/* Restore MDR in case of LPDDR1 */
--	ldr	r3, .saved_sam9_mdr
--	str	r3, [r2, #AT91_DDRSDRC_MDR]
--	/* Restore LPR on AT91 with DDRAM */
--	ldr	r3, .saved_sam9_lpr
--	str	r3, [r2, #AT91_DDRSDRC_LPR]
-+	/* Active the self-refresh mode */
-+	at91_sramc_self_refresh_ena
- 
--	/* If using the 2nd ddr controller */
--	ldr	r2, .sramc1_base
--	cmp	r2, #0
--	ldrne	r3, .saved_sam9_mdr1
--	strne	r3, [r2, #AT91_DDRSDRC_MDR]
--	ldrne	r3, .saved_sam9_lpr1
--	strne	r3, [r2, #AT91_DDRSDRC_LPR]
-+	ldr	r0, .pm_mode
-+	cmp	r0, #AT91_PM_STANDBY
-+	beq	standby
-+	cmp	r0, #AT91_PM_BACKUP
-+	beq	backup_mode
- 
--	b	exit_sramc_sf
-+	at91_ulp_mode
-+	b	exit_suspend
- 
--	/*
--	 * SDRAMC Memory controller
--	 */
--sdramc_sf:
--	tst	r0, #SRAMC_SELF_FRESH_ACTIVE
--	beq	sdramc_exit_sf
-+standby:
-+	/* Wait for interrupt */
-+	ldr	pmc, .pmc_base
-+	at91_cpu_idle
-+	b	exit_suspend
- 
--	/* Active SDRAMC self-refresh mode */
--	ldr	r3, [r2, #AT91_SDRAMC_LPR]
--	str	r3, .saved_sam9_lpr
--	bic	r3, r3, #AT91_SDRAMC_LPCB
--	orr	r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
--	str	r3, [r2, #AT91_SDRAMC_LPR]
-+backup_mode:
-+	at91_backup_mode
- 
--sdramc_exit_sf:
--	ldr	r3, .saved_sam9_lpr
--	str	r3, [r2, #AT91_SDRAMC_LPR]
-+exit_suspend:
-+	/* Exit the self-refresh mode */
-+	at91_sramc_self_refresh_dis
- 
--exit_sramc_sf:
--	mov	pc, lr
--ENDPROC(at91_sramc_self_refresh)
-+	/* Restore registers, and return */
-+	ldmfd	sp!, {r4 - r12, pc}
-+ENDPROC(at91_pm_suspend_in_sram)
- 
- .pmc_base:
- 	.word 0
diff --git a/target/linux/at91/patches-5.10/204-ARM-at91-pm-s-CONFIG_SOC_SAM9X60-CONFIG_HAVE_AT91_SA.patch b/target/linux/at91/patches-5.10/204-ARM-at91-pm-s-CONFIG_SOC_SAM9X60-CONFIG_HAVE_AT91_SA.patch
deleted file mode 100644
index 4601d922d65b..000000000000
--- a/target/linux/at91/patches-5.10/204-ARM-at91-pm-s-CONFIG_SOC_SAM9X60-CONFIG_HAVE_AT91_SA.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 673d2519e9028dafb678fac29a990740958bed3c Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:54 +0300
-Subject: [PATCH 204/247] ARM: at91: pm:
- s/CONFIG_SOC_SAM9X60/CONFIG_HAVE_AT91_SAM9X60_PLL/g
-
-Replace CONFIG_SOC_SAM9X60 with CONFIG_HAVE_AT91_SAM9X60_PLL as the
-SAM9X60's PLL is also present on SAMA7G5.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-9-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm_suspend.S | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/mach-at91/pm_suspend.S
-+++ b/arch/arm/mach-at91/pm_suspend.S
-@@ -422,7 +422,7 @@ sr_dis_exit:
- 	cmp	tmp1, #AT91_PMC_V1
- 	beq	1f
- 
--#ifdef CONFIG_SOC_SAM9X60
-+#ifdef CONFIG_HAVE_AT91_SAM9X60_PLL
- 	/* Save PLLA settings. */
- 	ldr	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
- 	bic	tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
-@@ -489,7 +489,7 @@ sr_dis_exit:
- 	cmp	tmp3, #AT91_PMC_V1
- 	beq	4f
- 
--#ifdef CONFIG_SOC_SAM9X60
-+#ifdef CONFIG_HAVE_AT91_SAM9X60_PLL
- 	/* step 1. */
- 	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
- 	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
diff --git a/target/linux/at91/patches-5.10/205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch b/target/linux/at91/patches-5.10/205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch
deleted file mode 100644
index 16e733727f4c..000000000000
--- a/target/linux/at91/patches-5.10/205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From 67face049c62cb37cf93da26b7fea037228d1d3d Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:55 +0300
-Subject: [PATCH 205/247] ARM: at91: pm: add support for waiting MCK1..4
-
-SAMA7G5 has 5 master clocks 0..4. MCK0 is controlled differently than
-MCK 1..4. MCK 1..4 should also be saved/restored in the last phase of
-suspend/resume. Thus, adapt wait_mckrdy to support also MCK1..4.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-10-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm_suspend.S | 48 ++++++++++++++++++++++++---------
- 1 file changed, 35 insertions(+), 13 deletions(-)
-
---- a/arch/arm/mach-at91/pm_suspend.S
-+++ b/arch/arm/mach-at91/pm_suspend.S
-@@ -22,11 +22,23 @@ tmp3	.req	r6
- 
- /*
-  * Wait until master clock is ready (after switching master clock source)
-+ *
-+ * @r_mckid:	register holding master clock identifier
-+ *
-+ * Side effects: overwrites r7, r8
-  */
--	.macro wait_mckrdy
--1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
--	tst	tmp1, #AT91_PMC_MCKRDY
--	beq	1b
-+	.macro wait_mckrdy r_mckid
-+#ifdef CONFIG_SOC_SAMA7
-+	cmp	\r_mckid, #0
-+	beq	1f
-+	mov	r7, #AT91_PMC_MCKXRDY
-+	b	2f
-+#endif
-+1:	mov	r7, #AT91_PMC_MCKRDY
-+2:	ldr	r8, [pmc, #AT91_PMC_SR]
-+	and	r8, r7
-+	cmp	r8, r7
-+	bne	2b
- 	.endm
- 
- /*
-@@ -231,7 +243,9 @@ sr_dis_exit:
- 	bic	tmp1, tmp1, #AT91_PMC_PRES
- 	orr	tmp1, tmp1, #AT91_PMC_PRES_64
- 	str	tmp1, [pmc, tmp3]
--	wait_mckrdy
-+
-+	mov	tmp3, #0
-+	wait_mckrdy tmp3
- 	b	1f
- 
- 0:
-@@ -267,10 +281,13 @@ sr_dis_exit:
- 	bne	5f
- 
- 	/* Set lowest prescaler for fast resume. */
-+	ldr	tmp3, .mckr_offset
- 	ldr	tmp1, [pmc, tmp3]
- 	bic	tmp1, tmp1, #AT91_PMC_PRES
- 	str	tmp1, [pmc, tmp3]
--	wait_mckrdy
-+
-+	mov	tmp3, #0
-+	wait_mckrdy tmp3
- 	b	6f
- 
- 5:	/* Restore RC oscillator state */
-@@ -307,6 +324,7 @@ sr_dis_exit:
- .macro at91_pm_ulp1_mode
- 	ldr	pmc, .pmc_base
- 	ldr	tmp2, .mckr_offset
-+	mov	tmp3, #0
- 
- 	/* Save RC oscillator state and check if it is enabled. */
- 	ldr	tmp1, [pmc, #AT91_PMC_SR]
-@@ -348,7 +366,7 @@ sr_dis_exit:
- 	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
- 	str	tmp1, [pmc, tmp2]
- 
--	wait_mckrdy
-+	wait_mckrdy tmp3
- 
- 	/* Enter the ULP1 mode by set WAITMODE bit in CKGR_MOR */
- 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-@@ -361,7 +379,7 @@ sr_dis_exit:
- 	nop
- 	nop
- 
--	wait_mckrdy
-+	wait_mckrdy tmp3
- 
- 	/* Enable the crystal oscillator */
- 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-@@ -377,7 +395,7 @@ sr_dis_exit:
- 	bic	tmp1, tmp1, #AT91_PMC_CSS
- 	str	tmp1, [pmc, tmp2]
- 
--	wait_mckrdy
-+	wait_mckrdy tmp3
- 
- 	/* Switch main clock source to crystal oscillator */
- 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-@@ -394,7 +412,7 @@ sr_dis_exit:
- 	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
- 	str	tmp1, [pmc, tmp2]
- 
--	wait_mckrdy
-+	wait_mckrdy tmp3
- 
- 	/* Restore RC oscillator state */
- 	ldr	tmp1, .saved_osc_status
-@@ -573,10 +591,12 @@ sr_dis_exit:
- save_mck:
- 	str	tmp1, [pmc, tmp2]
- 
--	wait_mckrdy
-+	mov	tmp3, #0
-+	wait_mckrdy tmp3
- 
- 	at91_plla_disable
- 
-+	ldr	tmp3, .pm_mode
- 	cmp	tmp3, #AT91_PM_ULP1
- 	beq	ulp1_mode
- 
-@@ -599,7 +619,8 @@ ulp_exit:
- 	ldr	tmp2, .saved_mckr
- 	str	tmp2, [pmc, tmp1]
- 
--	wait_mckrdy
-+	mov	tmp3, #0
-+	wait_mckrdy tmp3
- 
- .endm
- 
-@@ -611,7 +632,8 @@ ulp_exit:
- 	bic	tmp1, tmp1, #AT91_PMC_CSS
- 	str	tmp1, [pmc, tmp2]
- 
--	wait_mckrdy
-+	mov	tmp3, #0
-+	wait_mckrdy tmp3
- 
- 	/*BUMEN*/
- 	ldr	r0, .sfrbu
diff --git a/target/linux/at91/patches-5.10/206-ARM-at91-sfrbu-add-sfrbu-registers-definitions-for-s.patch b/target/linux/at91/patches-5.10/206-ARM-at91-sfrbu-add-sfrbu-registers-definitions-for-s.patch
deleted file mode 100644
index 37a22885d79f..000000000000
--- a/target/linux/at91/patches-5.10/206-ARM-at91-sfrbu-add-sfrbu-registers-definitions-for-s.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From c6b435625975d9a6daeffd81509a9877ddfb93b5 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:56 +0300
-Subject: [PATCH 206/247] ARM: at91: sfrbu: add sfrbu registers definitions for
- sama7g5
-
-Add SFRBU registers definitions for SAMA7G5.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-11-claudiu.beznea@microchip.com
----
- include/soc/at91/sama7-sfrbu.h | 34 ++++++++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
- create mode 100644 include/soc/at91/sama7-sfrbu.h
-
---- /dev/null
-+++ b/include/soc/at91/sama7-sfrbu.h
-@@ -0,0 +1,34 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/*
-+ * Microchip SAMA7 SFRBU registers offsets and bit definitions.
-+ *
-+ * Copyright (C) [2020] Microchip Technology Inc. and its subsidiaries
-+ *
-+ * Author: Claudu Beznea <claudiu.beznea@microchip.com>
-+ */
-+
-+#ifndef __SAMA7_SFRBU_H__
-+#define __SAMA7_SFRBU_H__
-+
-+#ifdef CONFIG_SOC_SAMA7
-+
-+#define AT91_SFRBU_PSWBU			(0x00)		/* SFRBU Power Switch BU Control Register */
-+#define		AT91_SFRBU_PSWBU_PSWKEY		(0x4BD20C << 8)	/* Specific value mandatory to allow writing of other register bits */
-+#define		AT91_SFRBU_PSWBU_STATE		(1 << 2)	/* Power switch BU state */
-+#define		AT91_SFRBU_PSWBU_SOFTSWITCH	(1 << 1)	/* Power switch BU source selection */
-+#define		AT91_SFRBU_PSWBU_CTRL		(1 << 0)	/* Power switch BU control */
-+
-+#define AT91_SFRBU_25LDOCR			(0x0C)		/* SFRBU 2.5V LDO Control Register */
-+#define		AT91_SFRBU_25LDOCR_LDOANAKEY	(0x3B6E18 << 8)	/* Specific value mandatory to allow writing of other register bits. */
-+#define		AT91_SFRBU_25LDOCR_STATE	(1 << 3)	/* LDOANA Switch On/Off Control */
-+#define		AT91_SFRBU_25LDOCR_LP		(1 << 2)	/* LDOANA Low-Power Mode Control */
-+#define		AT91_SFRBU_PD_VALUE_MSK		(0x3)
-+#define		AT91_SFRBU_25LDOCR_PD_VALUE(v)	((v) & AT91_SFRBU_PD_VALUE_MSK)	/* LDOANA Pull-down value */
-+
-+#define AT91_FRBU_DDRPWR			(0x10)		/* SFRBU DDR Power Control Register */
-+#define		AT91_FRBU_DDRPWR_STATE		(1 << 0)	/* DDR Power Mode State */
-+
-+#endif /* CONFIG_SOC_SAMA7 */
-+
-+#endif /* __SAMA7_SFRBU_H__ */
-+
diff --git a/target/linux/at91/patches-5.10/207-ARM-at91-ddr-add-registers-definitions-for-sama7g5-s.patch b/target/linux/at91/patches-5.10/207-ARM-at91-ddr-add-registers-definitions-for-sama7g5-s.patch
deleted file mode 100644
index 1df310f2165e..000000000000
--- a/target/linux/at91/patches-5.10/207-ARM-at91-ddr-add-registers-definitions-for-sama7g5-s.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 0005be9abfcddf9a29c6d07afe06caa41560d424 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:57 +0300
-Subject: [PATCH 207/247] ARM: at91: ddr: add registers definitions for
- sama7g5's ddr
-
-Add registers and bits definitions for SAMA7G5's UDDRC and DDR3PHY.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-12-claudiu.beznea@microchip.com
----
- include/soc/at91/sama7-ddr.h | 80 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 80 insertions(+)
- create mode 100644 include/soc/at91/sama7-ddr.h
-
---- /dev/null
-+++ b/include/soc/at91/sama7-ddr.h
-@@ -0,0 +1,80 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/*
-+ * Microchip SAMA7 UDDR Controller and DDR3 PHY Controller registers offsets
-+ * and bit definitions.
-+ *
-+ * Copyright (C) [2020] Microchip Technology Inc. and its subsidiaries
-+ *
-+ * Author: Claudu Beznea <claudiu.beznea@microchip.com>
-+ */
-+
-+#ifndef __SAMA7_DDR_H__
-+#define __SAMA7_DDR_H__
-+
-+#ifdef CONFIG_SOC_SAMA7
-+
-+/* DDR3PHY */
-+#define DDR3PHY_PIR				(0x04)		/* DDR3PHY PHY Initialization Register	*/
-+#define	DDR3PHY_PIR_DLLBYP		(1 << 17)	/* DLL Bypass */
-+#define		DDR3PHY_PIR_ITMSRST		(1 << 4)	/* Interface Timing Module Soft Reset */
-+#define	DDR3PHY_PIR_DLLLOCK		(1 << 2)	/* DLL Lock */
-+#define		DDR3PHY_PIR_DLLSRST		(1 << 1)	/* DLL Soft Rest */
-+#define	DDR3PHY_PIR_INIT		(1 << 0)	/* Initialization Trigger */
-+
-+#define DDR3PHY_PGCR				(0x08)		/* DDR3PHY PHY General Configuration Register */
-+#define		DDR3PHY_PGCR_CKDV1		(1 << 13)	/* CK# Disable Value */
-+#define		DDR3PHY_PGCR_CKDV0		(1 << 12)	/* CK Disable Value */
-+
-+#define	DDR3PHY_PGSR				(0x0C)		/* DDR3PHY PHY General Status Register */
-+#define		DDR3PHY_PGSR_IDONE		(1 << 0)	/* Initialization Done */
-+
-+#define DDR3PHY_ACIOCR				(0x24)		/*  DDR3PHY AC I/O Configuration Register */
-+#define		DDR3PHY_ACIOCR_CSPDD_CS0	(1 << 18)	/* CS#[0] Power Down Driver */
-+#define		DDR3PHY_ACIOCR_CKPDD_CK0	(1 << 8)	/* CK[0] Power Down Driver */
-+#define		DDR3PHY_ACIORC_ACPDD		(1 << 3)	/* AC Power Down Driver */
-+
-+#define DDR3PHY_DXCCR				(0x28)		/* DDR3PHY DATX8 Common Configuration Register */
-+#define		DDR3PHY_DXCCR_DXPDR		(1 << 3)	/* Data Power Down Receiver */
-+
-+#define DDR3PHY_DSGCR				(0x2C)		/* DDR3PHY DDR System General Configuration Register */
-+#define		DDR3PHY_DSGCR_ODTPDD_ODT0	(1 << 20)	/* ODT[0] Power Down Driver */
-+
-+#define DDR3PHY_ZQ0SR0				(0x188)		/* ZQ status register 0 */
-+
-+/* UDDRC */
-+#define UDDRC_STAT				(0x04)		/* UDDRC Operating Mode Status Register */
-+#define		UDDRC_STAT_SELFREF_TYPE_DIS	(0x0 << 4)	/* SDRAM is not in Self-refresh */
-+#define		UDDRC_STAT_SELFREF_TYPE_PHY	(0x1 << 4)	/* SDRAM is in Self-refresh, which was caused by PHY Master Request */
-+#define		UDDRC_STAT_SELFREF_TYPE_SW	(0x2 << 4)	/* SDRAM is in Self-refresh, which was not caused solely under Automatic Self-refresh control */
-+#define		UDDRC_STAT_SELFREF_TYPE_AUTO	(0x3 << 4)	/* SDRAM is in Self-refresh, which was caused by Automatic Self-refresh only */
-+#define		UDDRC_STAT_SELFREF_TYPE_MSK	(0x3 << 4)	/* Self-refresh type mask */
-+#define		UDDRC_STAT_OPMODE_INIT		(0x0 << 0)	/* Init */
-+#define		UDDRC_STAT_OPMODE_NORMAL	(0x1 << 0)	/* Normal */
-+#define		UDDRC_STAT_OPMODE_PWRDOWN	(0x2 << 0)	/* Power-down */
-+#define		UDDRC_STAT_OPMODE_SELF_REFRESH	(0x3 << 0)	/* Self-refresh */
-+#define		UDDRC_STAT_OPMODE_MSK		(0x7 << 0)	/* Operating mode mask */
-+
-+#define UDDRC_PWRCTL				(0x30)		/* UDDRC Low Power Control Register */
-+#define		UDDRC_PWRCTRL_SELFREF_SW	(1 << 5)	/* Software self-refresh */
-+
-+#define UDDRC_DFIMISC				(0x1B0)		/* UDDRC DFI Miscellaneous Control Register */
-+#define		UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN (1 << 0)	/* PHY initialization complete enable signal */
-+
-+#define UDDRC_SWCTRL				(0x320)		/* UDDRC Software Register Programming Control Enable */
-+#define		UDDRC_SWCTRL_SW_DONE		(1 << 0)	/* Enable quasi-dynamic register programming outside reset */
-+
-+#define UDDRC_SWSTAT				(0x324)		/* UDDRC Software Register Programming Control Status */
-+#define		UDDRC_SWSTAT_SW_DONE_ACK	(1 << 0)	/* Register programming done */
-+
-+#define UDDRC_PSTAT				(0x3FC)		/* UDDRC Port Status Register */
-+#define	UDDRC_PSTAT_ALL_PORTS		(0x1F001F)	/* Read + writes outstanding transactions on all ports */
-+
-+#define UDDRC_PCTRL_0				(0x490)		/* UDDRC Port 0 Control Register */
-+#define UDDRC_PCTRL_1				(0x540)		/* UDDRC Port 1 Control Register */
-+#define UDDRC_PCTRL_2				(0x5F0)		/* UDDRC Port 2 Control Register */
-+#define UDDRC_PCTRL_3				(0x6A0)		/* UDDRC Port 3 Control Register */
-+#define UDDRC_PCTRL_4				(0x750)		/* UDDRC Port 4 Control Register */
-+
-+#endif /* CONFIG_SOC_SAMA7 */
-+
-+#endif /* __SAMA7_DDR_H__ */
diff --git a/target/linux/at91/patches-5.10/208-ARM-at91-pm-add-self-refresh-support-for-sama7g5.patch b/target/linux/at91/patches-5.10/208-ARM-at91-pm-add-self-refresh-support-for-sama7g5.patch
deleted file mode 100644
index f8321e50429a..000000000000
--- a/target/linux/at91/patches-5.10/208-ARM-at91-pm-add-self-refresh-support-for-sama7g5.patch
+++ /dev/null
@@ -1,274 +0,0 @@
-From 1bfd85d71703f80392a71043caf74f159bec97b8 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:58 +0300
-Subject: [PATCH 208/247] ARM: at91: pm: add self-refresh support for sama7g5
-
-Add self-refresh support for SAMA7G5.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-13-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.h              |   2 +
- arch/arm/mach-at91/pm_data-offsets.c |   2 +
- arch/arm/mach-at91/pm_suspend.S      | 199 +++++++++++++++++++++++++++
- 3 files changed, 203 insertions(+)
-
---- a/arch/arm/mach-at91/pm.h
-+++ b/arch/arm/mach-at91/pm.h
-@@ -12,6 +12,7 @@
- #include <linux/mfd/syscon/atmel-mc.h>
- #include <soc/at91/at91sam9_ddrsdr.h>
- #include <soc/at91/at91sam9_sdramc.h>
-+#include <soc/at91/sama7-ddr.h>
- 
- #define AT91_MEMCTRL_MC		0
- #define AT91_MEMCTRL_SDRAMC	1
-@@ -27,6 +28,7 @@
- struct at91_pm_data {
- 	void __iomem *pmc;
- 	void __iomem *ramc[2];
-+	void __iomem *ramc_phy;
- 	unsigned long uhp_udp_mask;
- 	unsigned int memctrl;
- 	unsigned int mode;
---- a/arch/arm/mach-at91/pm_data-offsets.c
-+++ b/arch/arm/mach-at91/pm_data-offsets.c
-@@ -8,6 +8,8 @@ int main(void)
- 	DEFINE(PM_DATA_PMC,		offsetof(struct at91_pm_data, pmc));
- 	DEFINE(PM_DATA_RAMC0,		offsetof(struct at91_pm_data, ramc[0]));
- 	DEFINE(PM_DATA_RAMC1,		offsetof(struct at91_pm_data, ramc[1]));
-+	DEFINE(PM_DATA_RAMC_PHY,	offsetof(struct at91_pm_data,
-+						 ramc_phy));
- 	DEFINE(PM_DATA_MEMCTRL,	offsetof(struct at91_pm_data, memctrl));
- 	DEFINE(PM_DATA_MODE,		offsetof(struct at91_pm_data, mode));
- 	DEFINE(PM_DATA_SHDWC,		offsetof(struct at91_pm_data, shdwc));
---- a/arch/arm/mach-at91/pm_suspend.S
-+++ b/arch/arm/mach-at91/pm_suspend.S
-@@ -87,6 +87,200 @@ tmp3	.req	r6
- 
- 	.arm
- 
-+#ifdef CONFIG_SOC_SAMA7
-+/**
-+ * Enable self-refresh
-+ *
-+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3, r7
-+ */
-+.macro at91_sramc_self_refresh_ena
-+	ldr	r2, .sramc_base
-+	ldr	r3, .sramc_phy_base
-+	ldr	r7, .pm_mode
-+
-+	dsb
-+
-+	/* Disable all AXI ports. */
-+	ldr	tmp1, [r2, #UDDRC_PCTRL_0]
-+	bic	tmp1, tmp1, #0x1
-+	str	tmp1, [r2, #UDDRC_PCTRL_0]
-+
-+	ldr	tmp1, [r2, #UDDRC_PCTRL_1]
-+	bic	tmp1, tmp1, #0x1
-+	str	tmp1, [r2, #UDDRC_PCTRL_1]
-+
-+	ldr	tmp1, [r2, #UDDRC_PCTRL_2]
-+	bic	tmp1, tmp1, #0x1
-+	str	tmp1, [r2, #UDDRC_PCTRL_2]
-+
-+	ldr	tmp1, [r2, #UDDRC_PCTRL_3]
-+	bic	tmp1, tmp1, #0x1
-+	str	tmp1, [r2, #UDDRC_PCTRL_3]
-+
-+	ldr	tmp1, [r2, #UDDRC_PCTRL_4]
-+	bic	tmp1, tmp1, #0x1
-+	str	tmp1, [r2, #UDDRC_PCTRL_4]
-+
-+sr_ena_1:
-+	/* Wait for all ports to disable. */
-+	ldr	tmp1, [r2, #UDDRC_PSTAT]
-+	ldr	tmp2, =UDDRC_PSTAT_ALL_PORTS
-+	tst	tmp1, tmp2
-+	bne	sr_ena_1
-+
-+	/* Switch to self-refresh. */
-+	ldr	tmp1, [r2, #UDDRC_PWRCTL]
-+	orr	tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
-+	str	tmp1, [r2, #UDDRC_PWRCTL]
-+
-+sr_ena_2:
-+	/* Wait for self-refresh enter. */
-+	ldr	tmp1, [r2, #UDDRC_STAT]
-+	bic	tmp1, tmp1, #~UDDRC_STAT_SELFREF_TYPE_MSK
-+	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
-+	bne	sr_ena_2
-+
-+	/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
-+	cmp	r7, #AT91_PM_BACKUP
-+	beq	sr_ena_3
-+	ldr	tmp1, [r3, #DDR3PHY_PIR]
-+	orr	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
-+	str	tmp1, [r3, #DDR3PHY_PIR]
-+
-+sr_ena_3:
-+	/* Power down DDR PHY data receivers. */
-+	ldr	tmp1, [r3, #DDR3PHY_DXCCR]
-+	orr	tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
-+	str	tmp1, [r3, #DDR3PHY_DXCCR]
-+
-+	/* Power down ADDR/CMD IO. */
-+	ldr	tmp1, [r3, #DDR3PHY_ACIOCR]
-+	orr	tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
-+	orr	tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
-+	orr	tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
-+	str	tmp1, [r3, #DDR3PHY_ACIOCR]
-+
-+	/* Power down ODT. */
-+	ldr	tmp1, [r3, #DDR3PHY_DSGCR]
-+	orr	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
-+	str	tmp1, [r3, #DDR3PHY_DSGCR]
-+.endm
-+
-+/**
-+ * Disable self-refresh
-+ *
-+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3
-+ */
-+.macro at91_sramc_self_refresh_dis
-+	ldr	r2, .sramc_base
-+	ldr	r3, .sramc_phy_base
-+
-+	/* Power up DDR PHY data receivers. */
-+	ldr	tmp1, [r3, #DDR3PHY_DXCCR]
-+	bic	tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
-+	str	tmp1, [r3, #DDR3PHY_DXCCR]
-+
-+	/* Power up the output of CK and CS pins. */
-+	ldr	tmp1, [r3, #DDR3PHY_ACIOCR]
-+	bic	tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
-+	bic	tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
-+	bic	tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
-+	str	tmp1, [r3, #DDR3PHY_ACIOCR]
-+
-+	/* Power up ODT. */
-+	ldr	tmp1, [r3, #DDR3PHY_DSGCR]
-+	bic	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
-+	str	tmp1, [r3, #DDR3PHY_DSGCR]
-+
-+	/* Take DDR PHY's DLL out of bypass mode. */
-+	ldr	tmp1, [r3, #DDR3PHY_PIR]
-+	bic	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
-+	str	tmp1, [r3, #DDR3PHY_PIR]
-+
-+	/* Enable quasi-dynamic programming. */
-+	mov	tmp1, #0
-+	str	tmp1, [r2, #UDDRC_SWCTRL]
-+
-+	/* De-assert SDRAM initialization. */
-+	ldr	tmp1, [r2, #UDDRC_DFIMISC]
-+	bic	tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
-+	str	tmp1, [r2, #UDDRC_DFIMISC]
-+
-+	/* Quasi-dynamic programming done. */
-+	mov	tmp1, #UDDRC_SWCTRL_SW_DONE
-+	str	tmp1, [r2, #UDDRC_SWCTRL]
-+
-+sr_dis_1:
-+	ldr	tmp1, [r2, #UDDRC_SWSTAT]
-+	tst	tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
-+	beq	sr_dis_1
-+
-+	/* DLL soft-reset + DLL lock wait + ITM reset */
-+	mov	tmp1, #(DDR3PHY_PIR_INIT | DDR3PHY_PIR_DLLSRST | \
-+			DDR3PHY_PIR_DLLLOCK | DDR3PHY_PIR_ITMSRST)
-+	str	tmp1, [r3, #DDR3PHY_PIR]
-+
-+sr_dis_4:
-+	/* Wait for it. */
-+	ldr	tmp1, [r3, #DDR3PHY_PGSR]
-+	tst	tmp1, #DDR3PHY_PGSR_IDONE
-+	beq	sr_dis_4
-+
-+	/* Enable quasi-dynamic programming. */
-+	mov	tmp1, #0
-+	str	tmp1, [r2, #UDDRC_SWCTRL]
-+
-+	/* Assert PHY init complete enable signal. */
-+	ldr	tmp1, [r2, #UDDRC_DFIMISC]
-+	orr	tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
-+	str	tmp1, [r2, #UDDRC_DFIMISC]
-+
-+	/* Programming is done. Set sw_done. */
-+	mov	tmp1, #UDDRC_SWCTRL_SW_DONE
-+	str	tmp1, [r2, #UDDRC_SWCTRL]
-+
-+sr_dis_5:
-+	/* Wait for it. */
-+	ldr	tmp1, [r2, #UDDRC_SWSTAT]
-+	tst	tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
-+	beq	sr_dis_5
-+
-+	/* Trigger self-refresh exit. */
-+	ldr	tmp1, [r2, #UDDRC_PWRCTL]
-+	bic	tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
-+	str	tmp1, [r2, #UDDRC_PWRCTL]
-+
-+sr_dis_6:
-+	/* Wait for self-refresh exit done. */
-+	ldr	tmp1, [r2, #UDDRC_STAT]
-+	bic	tmp1, tmp1, #~UDDRC_STAT_OPMODE_MSK
-+	cmp	tmp1, #UDDRC_STAT_OPMODE_NORMAL
-+	bne	sr_dis_6
-+
-+	/* Enable all AXI ports. */
-+	ldr	tmp1, [r2, #UDDRC_PCTRL_0]
-+	orr	tmp1, tmp1, #0x1
-+	str	tmp1, [r2, #UDDRC_PCTRL_0]
-+
-+	ldr	tmp1, [r2, #UDDRC_PCTRL_1]
-+	orr	tmp1, tmp1, #0x1
-+	str	tmp1, [r2, #UDDRC_PCTRL_1]
-+
-+	ldr	tmp1, [r2, #UDDRC_PCTRL_2]
-+	orr	tmp1, tmp1, #0x1
-+	str	tmp1, [r2, #UDDRC_PCTRL_2]
-+
-+	ldr	tmp1, [r2, #UDDRC_PCTRL_3]
-+	orr	tmp1, tmp1, #0x1
-+	str	tmp1, [r2, #UDDRC_PCTRL_3]
-+
-+	ldr	tmp1, [r2, #UDDRC_PCTRL_4]
-+	orr	tmp1, tmp1, #0x1
-+	str	tmp1, [r2, #UDDRC_PCTRL_4]
-+
-+	dsb
-+.endm
-+#else
- /**
-  * Enable self-refresh
-  *
-@@ -228,6 +422,7 @@ sdramc_exit_sf:
- 
- sr_dis_exit:
- .endm
-+#endif
- 
- .macro at91_pm_ulp0_mode
- 	ldr	pmc, .pmc_base
-@@ -668,6 +863,8 @@ ENTRY(at91_pm_suspend_in_sram)
- 	str	tmp1, .sramc_base
- 	ldr	tmp1, [r0, #PM_DATA_RAMC1]
- 	str	tmp1, .sramc1_base
-+	ldr	tmp1, [r0, #PM_DATA_RAMC_PHY]
-+	str	tmp1, .sramc_phy_base
- 	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
- 	str	tmp1, .memtype
- 	ldr	tmp1, [r0, #PM_DATA_MODE]
-@@ -721,6 +918,8 @@ ENDPROC(at91_pm_suspend_in_sram)
- 	.word 0
- .sramc1_base:
- 	.word 0
-+.sramc_phy_base:
-+	.word 0
- .shdwc:
- 	.word 0
- .sfrbu:
diff --git a/target/linux/at91/patches-5.10/209-ARM-at91-pm-add-support-for-MCK1.4-save-restore-for-.patch b/target/linux/at91/patches-5.10/209-ARM-at91-pm-add-support-for-MCK1.4-save-restore-for-.patch
deleted file mode 100644
index 7c8614125c84..000000000000
--- a/target/linux/at91/patches-5.10/209-ARM-at91-pm-add-support-for-MCK1.4-save-restore-for-.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From 9ee7fd7aa956671727752dac6bd131cf511c1137 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:49:59 +0300
-Subject: [PATCH 209/247] ARM: at91: pm: add support for MCK1..4 save/restore
- for ulp modes
-
-Add support for MCK1..4 save restore for ULP modes.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-14-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm_suspend.S | 126 ++++++++++++++++++++++++++++++++
- 1 file changed, 126 insertions(+)
-
---- a/arch/arm/mach-at91/pm_suspend.S
-+++ b/arch/arm/mach-at91/pm_suspend.S
-@@ -765,7 +765,122 @@ sr_dis_exit:
- 2:
- .endm
- 
-+/**
-+ * at91_mckx_ps_enable:	save MCK1..4 settings and switch it to main clock
-+ *
-+ * Side effects: overwrites tmp1, tmp2
-+ */
-+.macro at91_mckx_ps_enable
-+#ifdef CONFIG_SOC_SAMA7
-+	ldr	pmc, .pmc_base
-+
-+	/* There are 4 MCKs we need to handle: MCK1..4 */
-+	mov	tmp1, #1
-+e_loop:	cmp	tmp1, #5
-+	beq	e_done
-+
-+	/* Write MCK ID to retrieve the settings. */
-+	str	tmp1, [pmc, #AT91_PMC_MCR_V2]
-+	ldr	tmp2, [pmc, #AT91_PMC_MCR_V2]
-+
-+e_save_mck1:
-+	cmp	tmp1, #1
-+	bne	e_save_mck2
-+	str	tmp2, .saved_mck1
-+	b	e_ps
-+
-+e_save_mck2:
-+	cmp	tmp1, #2
-+	bne	e_save_mck3
-+	str	tmp2, .saved_mck2
-+	b	e_ps
-+
-+e_save_mck3:
-+	cmp	tmp1, #3
-+	bne	e_save_mck4
-+	str	tmp2, .saved_mck3
-+	b	e_ps
-+
-+e_save_mck4:
-+	str	tmp2, .saved_mck4
-+
-+e_ps:
-+	/* Use CSS=MAINCK and DIV=1. */
-+	bic	tmp2, tmp2, #AT91_PMC_MCR_V2_CSS
-+	bic	tmp2, tmp2, #AT91_PMC_MCR_V2_DIV
-+	orr	tmp2, tmp2, #AT91_PMC_MCR_V2_CSS_MAINCK
-+	orr	tmp2, tmp2, #AT91_PMC_MCR_V2_DIV1
-+	str	tmp2, [pmc, #AT91_PMC_MCR_V2]
-+
-+	wait_mckrdy tmp1
-+
-+	add	tmp1, tmp1, #1
-+	b	e_loop
-+
-+e_done:
-+#endif
-+.endm
-+
-+/**
-+ * at91_mckx_ps_restore: restore MCK1..4 settings
-+ *
-+ * Side effects: overwrites tmp1, tmp2
-+ */
-+.macro at91_mckx_ps_restore
-+#ifdef CONFIG_SOC_SAMA7
-+	ldr	pmc, .pmc_base
-+
-+	/* There are 4 MCKs we need to handle: MCK1..4 */
-+	mov	tmp1, #1
-+r_loop:	cmp	tmp1, #5
-+	beq	r_done
-+
-+r_save_mck1:
-+	cmp	tmp1, #1
-+	bne	r_save_mck2
-+	ldr	tmp2, .saved_mck1
-+	b	r_ps
-+
-+r_save_mck2:
-+	cmp	tmp1, #2
-+	bne	r_save_mck3
-+	ldr	tmp2, .saved_mck2
-+	b	r_ps
-+
-+r_save_mck3:
-+	cmp	tmp1, #3
-+	bne	r_save_mck4
-+	ldr	tmp2, .saved_mck3
-+	b	r_ps
-+
-+r_save_mck4:
-+	ldr	tmp2, .saved_mck4
-+
-+r_ps:
-+	/* Write MCK ID to retrieve the settings. */
-+	str	tmp1, [pmc, #AT91_PMC_MCR_V2]
-+	ldr	tmp3, [pmc, #AT91_PMC_MCR_V2]
-+
-+	/* We need to restore CSS and DIV. */
-+	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_CSS
-+	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_DIV
-+	orr	tmp3, tmp3, tmp2
-+	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK
-+	orr	tmp3, tmp3, tmp1
-+	orr	tmp3, tmp3, #AT91_PMC_MCR_V2_CMD
-+	str	tmp2, [pmc, #AT91_PMC_MCR_V2]
-+
-+	wait_mckrdy tmp1
-+
-+	add	tmp1, tmp1, #1
-+	b	r_loop
-+r_done:
-+#endif
-+.endm
-+
- .macro at91_ulp_mode
-+	at91_mckx_ps_enable
-+
- 	ldr	pmc, .pmc_base
- 	ldr	tmp2, .mckr_offset
- 	ldr	tmp3, .pm_mode
-@@ -817,6 +932,7 @@ ulp_exit:
- 	mov	tmp3, #0
- 	wait_mckrdy tmp3
- 
-+	at91_mckx_ps_restore
- .endm
- 
- .macro at91_backup_mode
-@@ -946,6 +1062,16 @@ ENDPROC(at91_pm_suspend_in_sram)
- 	.word 0
- .saved_osc_status:
- 	.word 0
-+#ifdef CONFIG_SOC_SAMA7
-+.saved_mck1:
-+	.word 0
-+.saved_mck2:
-+	.word 0
-+.saved_mck3:
-+	.word 0
-+.saved_mck4:
-+	.word 0
-+#endif
- 
- ENTRY(at91_pm_suspend_in_sram_sz)
- 	.word .-at91_pm_suspend_in_sram
diff --git a/target/linux/at91/patches-5.10/210-ARM-at91-pm-add-support-for-2.5V-LDO-regulator-contr.patch b/target/linux/at91/patches-5.10/210-ARM-at91-pm-add-support-for-2.5V-LDO-regulator-contr.patch
deleted file mode 100644
index ede839bf7031..000000000000
--- a/target/linux/at91/patches-5.10/210-ARM-at91-pm-add-support-for-2.5V-LDO-regulator-contr.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From b2073cc043612bf95b115bd94103cfb2936f05bf Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:50:00 +0300
-Subject: [PATCH 210/247] ARM: at91: pm: add support for 2.5V LDO regulator
- control
-
-Add support to disable/enable 2.5V LDO regulator when entering/exiting
-any ULP mode.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-15-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.h         |  1 +
- arch/arm/mach-at91/pm_suspend.S | 29 +++++++++++++++++++++++++++++
- 2 files changed, 30 insertions(+)
-
---- a/arch/arm/mach-at91/pm.h
-+++ b/arch/arm/mach-at91/pm.h
-@@ -13,6 +13,7 @@
- #include <soc/at91/at91sam9_ddrsdr.h>
- #include <soc/at91/at91sam9_sdramc.h>
- #include <soc/at91/sama7-ddr.h>
-+#include <soc/at91/sama7-sfrbu.h>
- 
- #define AT91_MEMCTRL_MC		0
- #define AT91_MEMCTRL_SDRAMC	1
---- a/arch/arm/mach-at91/pm_suspend.S
-+++ b/arch/arm/mach-at91/pm_suspend.S
-@@ -83,6 +83,29 @@ tmp3	.req	r6
- 
- 	.endm
- 
-+/**
-+ * Set state for 2.5V low power regulator
-+ * @ena: 0 - disable regulator
-+ *	 1 - enable regulator
-+ *
-+ * Side effects: overwrites r7, r8, r9, r10
-+ */
-+	.macro at91_2_5V_reg_set_low_power ena
-+#ifdef CONFIG_SOC_SAMA7
-+	ldr	r7, .sfrbu
-+	mov	r8, #\ena
-+	ldr	r9, [r7, #AT91_SFRBU_25LDOCR]
-+	orr	r9, r9, #AT91_SFRBU_25LDOCR_LP
-+	cmp	r8, #1
-+	beq	lp_done_\ena
-+	bic	r9, r9, #AT91_SFRBU_25LDOCR_LP
-+lp_done_\ena:
-+	ldr	r10, =AT91_SFRBU_25LDOCR_LDOANAKEY
-+	orr	r9, r9, r10
-+	str	r9, [r7, #AT91_SFRBU_25LDOCR]
-+#endif
-+	.endm
-+
- 	.text
- 
- 	.arm
-@@ -906,6 +929,9 @@ save_mck:
- 
- 	at91_plla_disable
- 
-+	/* Enable low power mode for 2.5V regulator. */
-+	at91_2_5V_reg_set_low_power 1
-+
- 	ldr	tmp3, .pm_mode
- 	cmp	tmp3, #AT91_PM_ULP1
- 	beq	ulp1_mode
-@@ -918,6 +944,9 @@ ulp1_mode:
- 	b	ulp_exit
- 
- ulp_exit:
-+	/* Disable low power mode for 2.5V regulator. */
-+	at91_2_5V_reg_set_low_power 0
-+
- 	ldr	pmc, .pmc_base
- 
- 	at91_plla_enable
diff --git a/target/linux/at91/patches-5.10/211-ARM-at91-pm-wait-for-ddr-power-mode-off.patch b/target/linux/at91/patches-5.10/211-ARM-at91-pm-wait-for-ddr-power-mode-off.patch
deleted file mode 100644
index 886f81e7adfa..000000000000
--- a/target/linux/at91/patches-5.10/211-ARM-at91-pm-wait-for-ddr-power-mode-off.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 2b522a22243938dd7613e09c954172b1fa6217f5 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:50:01 +0300
-Subject: [PATCH 211/247] ARM: at91: pm: wait for ddr power mode off
-
-Wait for DDR power mode off before shutting down the core.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-16-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm_suspend.S | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/arm/mach-at91/pm_suspend.S
-+++ b/arch/arm/mach-at91/pm_suspend.S
-@@ -980,6 +980,11 @@ ulp_exit:
- 	mov	tmp1, #0x1
- 	str	tmp1, [r0, #0x10]
- 
-+	/* Wait for it. */
-+1:	ldr	tmp1, [r0, #0x10]
-+	tst	tmp1, #0x1
-+	beq	1b
-+
- 	/* Shutdown */
- 	ldr	r0, .shdwc
- 	mov	tmp1, #0xA5000000
diff --git a/target/linux/at91/patches-5.10/212-ARM-at91-pm-add-sama7g5-ddr-controller.patch b/target/linux/at91/patches-5.10/212-ARM-at91-pm-add-sama7g5-ddr-controller.patch
deleted file mode 100644
index e4962450615e..000000000000
--- a/target/linux/at91/patches-5.10/212-ARM-at91-pm-add-sama7g5-ddr-controller.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 3f55310c00b8c478da1458704027036c1a414973 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:50:03 +0300
-Subject: [PATCH 212/247] ARM: at91: pm: add sama7g5 ddr controller
-
-Add SAMA7G5 DDR controller to the list of DDR controller compatibles.
-At the moment there is no standby support. Adapt the code for this.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-18-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -548,6 +548,7 @@ static const struct of_device_id ramc_id
- 	{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
- 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
- 	{ .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
-+	{ .compatible = "microchip,sama7g5-uddrc", },
- 	{ /*sentinel*/ }
- };
- 
-@@ -569,9 +570,11 @@ static __init int at91_dt_ramc(void)
- 		}
- 
- 		ramc = of_id->data;
--		if (!standby)
--			standby = ramc->idle;
--		soc_pm.data.memctrl = ramc->memctrl;
-+		if (ramc) {
-+			if (!standby)
-+				standby = ramc->idle;
-+			soc_pm.data.memctrl = ramc->memctrl;
-+		}
- 
- 		idx++;
- 	}
diff --git a/target/linux/at91/patches-5.10/213-ARM-at91-pm-add-sama7g5-ddr-phy-controller.patch b/target/linux/at91/patches-5.10/213-ARM-at91-pm-add-sama7g5-ddr-phy-controller.patch
deleted file mode 100644
index 89dcacec92e7..000000000000
--- a/target/linux/at91/patches-5.10/213-ARM-at91-pm-add-sama7g5-ddr-phy-controller.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From bbbbf16c44f34a2d563fa7d71de64ffe3b4b82dc Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:50:04 +0300
-Subject: [PATCH 213/247] ARM: at91: pm: add sama7g5 ddr phy controller
-
-SAMA7G5 self-refresh procedure accesses also the DDR PHY registers.
-Adapt the code so that the at91_dt_ramc() to look also for DDR PHYs,
-in case it is mandatory.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-19-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c | 27 +++++++++++++++++++++------
- 1 file changed, 21 insertions(+), 6 deletions(-)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -552,7 +552,12 @@ static const struct of_device_id ramc_id
- 	{ /*sentinel*/ }
- };
- 
--static __init int at91_dt_ramc(void)
-+static const struct of_device_id ramc_phy_ids[] __initconst = {
-+	{ .compatible = "microchip,sama7g5-ddr3phy", },
-+	{ /* Sentinel. */ },
-+};
-+
-+static __init void at91_dt_ramc(bool phy_mandatory)
- {
- 	struct device_node *np;
- 	const struct of_device_id *of_id;
-@@ -585,6 +590,16 @@ static __init int at91_dt_ramc(void)
- 		goto unmap_ramc;
- 	}
- 
-+	/* Lookup for DDR PHY node, if any. */
-+	for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) {
-+		soc_pm.data.ramc_phy = of_iomap(np, 0);
-+		if (!soc_pm.data.ramc_phy)
-+			panic(pr_fmt("unable to map ramc phy cpu registers\n"));
-+	}
-+
-+	if (phy_mandatory && !soc_pm.data.ramc_phy)
-+		panic(pr_fmt("DDR PHY is mandatory!\n"));
-+
- 	if (!standby) {
- 		pr_warn("ramc no standby function available\n");
- 		return 0;
-@@ -953,7 +968,7 @@ void __init at91rm9200_pm_init(void)
- 	soc_pm.data.standby_mode = AT91_PM_STANDBY;
- 	soc_pm.data.suspend_mode = AT91_PM_ULP0;
- 
--	ret = at91_dt_ramc();
-+	ret = at91_dt_ramc(false);
- 	if (ret)
- 		return;
- 
-@@ -980,7 +995,7 @@ void __init sam9x60_pm_init(void)
- 
- 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
- 	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
--	ret = at91_dt_ramc();
-+	ret = at91_dt_ramc(false);
- 	if (ret)
- 		return;
- 
-@@ -1005,7 +1020,7 @@ void __init at91sam9_pm_init(void)
- 	soc_pm.data.standby_mode = AT91_PM_STANDBY;
- 	soc_pm.data.suspend_mode = AT91_PM_ULP0;
- 
--	ret = at91_dt_ramc();
-+	ret = at91_dt_ramc(false);
- 	if (ret)
- 		return;
- 
-@@ -1023,7 +1038,7 @@ void __init sama5_pm_init(void)
- 		return;
- 
- 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
--	ret = at91_dt_ramc();
-+	ret = at91_dt_ramc(false);
- 	if (ret)
- 		return;
- 
-@@ -1048,7 +1063,7 @@ void __init sama5d2_pm_init(void)
- 
- 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
- 	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
--	ret = at91_dt_ramc();
-+	ret = at91_dt_ramc(false);
- 	if (ret)
- 		return;
- 
diff --git a/target/linux/at91/patches-5.10/214-ARM-at91-pm-save-ddr-phy-calibration-data-to-securam.patch b/target/linux/at91/patches-5.10/214-ARM-at91-pm-save-ddr-phy-calibration-data-to-securam.patch
deleted file mode 100644
index a46b5acb2215..000000000000
--- a/target/linux/at91/patches-5.10/214-ARM-at91-pm-save-ddr-phy-calibration-data-to-securam.patch
+++ /dev/null
@@ -1,151 +0,0 @@
-From b355bb98eae3e343969fc5a0203e0dab472a6acd Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:50:05 +0300
-Subject: [PATCH 214/247] ARM: at91: pm: save ddr phy calibration data to
- securam
-
-The resuming from backup mode is done with the help of bootloader.
-The bootloader reconfigure the DDR controller and DDR PHY controller.
-To speed-up the resuming process save the PHY calibration data into
-SECURAM before suspending (securam is powered on backup mode).
-This data will be later used by bootloader in DDR PHY reconfiguration
-process. Also, in the process or recalibration the first 8 words of
-the memory may get corrupted. To solve this, these 8 words are saved
-in the securam and restored by bootloader in the process of PHY
-configuration.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-20-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c | 60 ++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 59 insertions(+), 1 deletion(-)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -10,6 +10,7 @@
- #include <linux/io.h>
- #include <linux/of_address.h>
- #include <linux/of.h>
-+#include <linux/of_fdt.h>
- #include <linux/of_platform.h>
- #include <linux/parser.h>
- #include <linux/suspend.h>
-@@ -27,18 +28,23 @@
- #include "generic.h"
- #include "pm.h"
- 
-+#define BACKUP_DDR_PHY_CALIBRATION	(9)
-+
- /**
-  * struct at91_pm_bu - AT91 power management backup unit data structure
-  * @suspended: true if suspended to backup mode
-  * @reserved: reserved
-  * @canary: canary data for memory checking after exit from backup mode
-  * @resume: resume API
-+ * @ddr_phy_calibration: DDR PHY calibration data: ZQ0CR0, first 8 words
-+ * of the memory
-  */
- struct at91_pm_bu {
- 	int suspended;
- 	unsigned long reserved;
- 	phys_addr_t canary;
- 	phys_addr_t resume;
-+	unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION];
- };
- 
- /**
-@@ -48,6 +54,7 @@ struct at91_pm_bu {
-  * @ws_ids: wakup sources of_device_id array
-  * @data: PM data to be used on last phase of suspend
-  * @bu: backup unit mapped data (for backup mode)
-+ * @memcs: memory chip select
-  */
- struct at91_soc_pm {
- 	int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
-@@ -55,6 +62,7 @@ struct at91_soc_pm {
- 	const struct of_device_id *ws_ids;
- 	struct at91_pm_bu *bu;
- 	struct at91_pm_data data;
-+	void *memcs;
- };
- 
- /**
-@@ -316,6 +324,19 @@ extern u32 at91_pm_suspend_in_sram_sz;
- 
- static int at91_suspend_finish(unsigned long val)
- {
-+	int i;
-+
-+	if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) {
-+		/*
-+		 * The 1st 8 words of memory might get corrupted in the process
-+		 * of DDR PHY recalibration; it is saved here in securam and it
-+		 * will be restored later, after recalibration, by bootloader
-+		 */
-+		for (i = 1; i < BACKUP_DDR_PHY_CALIBRATION; i++)
-+			soc_pm.bu->ddr_phy_calibration[i] =
-+				*((unsigned int *)soc_pm.memcs + (i - 1));
-+	}
-+
- 	flush_cache_all();
- 	outer_disable();
- 
-@@ -688,12 +709,40 @@ static bool __init at91_is_pm_mode_activ
- 		soc_pm.data.suspend_mode == pm_mode);
- }
- 
-+static int __init at91_pm_backup_scan_memcs(unsigned long node,
-+					    const char *uname, int depth,
-+					    void *data)
-+{
-+	const char *type;
-+	const __be32 *reg;
-+	int *located = data;
-+	int size;
-+
-+	/* Memory node already located. */
-+	if (*located)
-+		return 0;
-+
-+	type = of_get_flat_dt_prop(node, "device_type", NULL);
-+
-+	/* We are scanning "memory" nodes only. */
-+	if (!type || strcmp(type, "memory"))
-+		return 0;
-+
-+	reg = of_get_flat_dt_prop(node, "reg", &size);
-+	if (reg) {
-+		soc_pm.memcs = __va((phys_addr_t)be32_to_cpu(*reg));
-+		*located = 1;
-+	}
-+
-+	return 0;
-+}
-+
- static int __init at91_pm_backup_init(void)
- {
- 	struct gen_pool *sram_pool;
- 	struct device_node *np;
- 	struct platform_device *pdev;
--	int ret = -ENODEV;
-+	int ret = -ENODEV, located = 0;
- 
- 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
- 		return -EPERM;
-@@ -728,6 +777,15 @@ static int __init at91_pm_backup_init(vo
- 	soc_pm.bu->suspended = 0;
- 	soc_pm.bu->canary = __pa_symbol(&canary);
- 	soc_pm.bu->resume = __pa_symbol(cpu_resume);
-+	if (soc_pm.data.ramc_phy) {
-+		of_scan_flat_dt(at91_pm_backup_scan_memcs, &located);
-+		if (!located)
-+			goto securam_fail;
-+
-+		/* DDR3PHY_ZQ0SR0 */
-+		soc_pm.bu->ddr_phy_calibration[0] = readl(soc_pm.data.ramc_phy +
-+							  0x188);
-+	}
- 
- 	return 0;
- 
diff --git a/target/linux/at91/patches-5.10/215-ARM-at91-pm-add-backup-mode-support-for-SAMA7G5.patch b/target/linux/at91/patches-5.10/215-ARM-at91-pm-add-backup-mode-support-for-SAMA7G5.patch
deleted file mode 100644
index cc5f4aec0a60..000000000000
--- a/target/linux/at91/patches-5.10/215-ARM-at91-pm-add-backup-mode-support-for-SAMA7G5.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 62be32b56ff31b2cd048a53fac40a165c5bc66cd Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:50:06 +0300
-Subject: [PATCH 215/247] ARM: at91: pm: add backup mode support for SAMA7G5
-
-Adapt at91_pm_backup_init() to work for SAMA7G5. Also, set the LPM pin
-to shutdown controller. This will signal to PMIC that it needs to switch
-to the state corresponding to backup mode.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-21-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c         | 3 ++-
- arch/arm/mach-at91/pm_suspend.S | 7 +++++++
- 2 files changed, 9 insertions(+), 1 deletion(-)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -744,7 +744,8 @@ static int __init at91_pm_backup_init(vo
- 	struct platform_device *pdev;
- 	int ret = -ENODEV, located = 0;
- 
--	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
-+	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2) &&
-+	    !IS_ENABLED(CONFIG_SOC_SAMA7G5))
- 		return -EPERM;
- 
- 	if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
---- a/arch/arm/mach-at91/pm_suspend.S
-+++ b/arch/arm/mach-at91/pm_suspend.S
-@@ -106,6 +106,12 @@ lp_done_\ena:
- #endif
- 	.endm
- 
-+	.macro at91_backup_set_lpm reg
-+#ifdef CONFIG_SOC_SAMA7
-+	orr	\reg, \reg, #0x200000
-+#endif
-+	.endm
-+
- 	.text
- 
- 	.arm
-@@ -989,6 +995,7 @@ ulp_exit:
- 	ldr	r0, .shdwc
- 	mov	tmp1, #0xA5000000
- 	add	tmp1, tmp1, #0x1
-+	at91_backup_set_lpm tmp1
- 	str	tmp1, [r0, #0]
- .endm
- 
diff --git a/target/linux/at91/patches-5.10/216-ARM-at91-pm-add-sama7g5-s-pmc.patch b/target/linux/at91/patches-5.10/216-ARM-at91-pm-add-sama7g5-s-pmc.patch
deleted file mode 100644
index a471195fbc63..000000000000
--- a/target/linux/at91/patches-5.10/216-ARM-at91-pm-add-sama7g5-s-pmc.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From e9855ac00e8d9a2c41cea42b4f38a2b0b010bef3 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:50:07 +0300
-Subject: [PATCH 216/247] ARM: at91: pm: add sama7g5's pmc
-
-Add SAMA7G5's PMC to compatible list.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-22-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -912,6 +912,11 @@ static const struct pmc_info pmc_infos[]
- 		.mckr = 0x28,
- 		.version = AT91_PMC_V2,
- 	},
-+	{
-+		.mckr = 0x28,
-+		.version = AT91_PMC_V2,
-+	},
-+
- };
- 
- static const struct of_device_id atmel_pmc_ids[] __initconst = {
-@@ -927,6 +932,7 @@ static const struct of_device_id atmel_p
- 	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
- 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
- 	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
-+	{ .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
- 	{ /* sentinel */ },
- };
- 
diff --git a/target/linux/at91/patches-5.10/217-ARM-at91-sama7-introduce-sama7-SoC-family.patch b/target/linux/at91/patches-5.10/217-ARM-at91-sama7-introduce-sama7-SoC-family.patch
deleted file mode 100644
index dca065971b47..000000000000
--- a/target/linux/at91/patches-5.10/217-ARM-at91-sama7-introduce-sama7-SoC-family.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From dea645bce478cc72a2bf2413ec873927d1471442 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Thu, 15 Apr 2021 13:50:08 +0300
-Subject: [PATCH 217/247] ARM: at91: sama7: introduce sama7 SoC family
-
-Introduce new family of SoCs, sama7, and first SoC, sama7g5.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-[claudiu.beznea@microchip.com: keep only the sama7_dt]
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-23-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/Makefile |  1 +
- arch/arm/mach-at91/sama7.c  | 32 ++++++++++++++++++++++++++++++++
- 2 files changed, 33 insertions(+)
- create mode 100644 arch/arm/mach-at91/sama7.c
-
---- a/arch/arm/mach-at91/Makefile
-+++ b/arch/arm/mach-at91/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm92
- obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
- obj-$(CONFIG_SOC_SAM9X60)	+= sam9x60.o
- obj-$(CONFIG_SOC_SAMA5)		+= sama5.o
-+obj-$(CONFIG_SOC_SAMA7)		+= sama7.o
- obj-$(CONFIG_SOC_SAMV7)		+= samv7.o
- 
- # Power Management
---- /dev/null
-+++ b/arch/arm/mach-at91/sama7.c
-@@ -0,0 +1,32 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * Setup code for SAMA7
-+ *
-+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
-+ *
-+ */
-+
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/system_misc.h>
-+
-+#include "generic.h"
-+
-+static void __init sama7_dt_device_init(void)
-+{
-+	of_platform_default_populate(NULL, NULL, NULL);
-+}
-+
-+static const char *const sama7_dt_board_compat[] __initconst = {
-+	"microchip,sama7",
-+	NULL
-+};
-+
-+DT_MACHINE_START(sama7_dt, "Microchip SAMA7")
-+	/* Maintainer: Microchip */
-+	.init_machine	= sama7_dt_device_init,
-+	.dt_compat	= sama7_dt_board_compat,
-+MACHINE_END
-+
diff --git a/target/linux/at91/patches-5.10/218-ARM-at91-pm-add-pm-support-for-SAMA7G5.patch b/target/linux/at91/patches-5.10/218-ARM-at91-pm-add-pm-support-for-SAMA7G5.patch
deleted file mode 100644
index aada9c9679c9..000000000000
--- a/target/linux/at91/patches-5.10/218-ARM-at91-pm-add-pm-support-for-SAMA7G5.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From aba3984dc7a405d20b83bff603d23719d0e26bc7 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:50:09 +0300
-Subject: [PATCH 218/247] ARM: at91: pm: add pm support for SAMA7G5
-
-Add support for SAMA7G5 power management modes: standby, ulp0, ulp1, backup.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-24-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/generic.h |  2 ++
- arch/arm/mach-at91/pm.c      | 37 ++++++++++++++++++++++++++++++++++++
- arch/arm/mach-at91/sama7.c   |  1 +
- 3 files changed, 40 insertions(+)
-
---- a/arch/arm/mach-at91/generic.h
-+++ b/arch/arm/mach-at91/generic.h
-@@ -14,12 +14,14 @@ extern void __init at91sam9_pm_init(void
- extern void __init sam9x60_pm_init(void);
- extern void __init sama5_pm_init(void);
- extern void __init sama5d2_pm_init(void);
-+extern void __init sama7_pm_init(void);
- #else
- static inline void __init at91rm9200_pm_init(void) { }
- static inline void __init at91sam9_pm_init(void) { }
- static inline void __init sam9x60_pm_init(void) { }
- static inline void __init sama5_pm_init(void) { }
- static inline void __init sama5d2_pm_init(void) { }
-+static inline void __init sama7_pm_init(void) { }
- #endif
- 
- #endif /* _AT91_GENERIC_H */
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -152,6 +152,17 @@ static const struct of_device_id sam9x60
- 	{ /* sentinel */ }
- };
- 
-+static const struct of_device_id sama7g5_ws_ids[] = {
-+	{ .compatible = "atmel,at91sam9x5-rtc",		.data = &ws_info[1] },
-+	{ .compatible = "microchip,sama7g5-ohci",	.data = &ws_info[2] },
-+	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
-+	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
-+	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
-+	{ .compatible = "microchip,sama7g5-sdhci",	.data = &ws_info[3] },
-+	{ .compatible = "atmel,at91sam9260-rtt",	.data = &ws_info[4] },
-+	{ /* sentinel */ }
-+};
-+
- static int at91_pm_config_ws(unsigned int pm_mode, bool set)
- {
- 	const struct wakeup_source_info *wsi;
-@@ -1139,6 +1150,32 @@ void __init sama5d2_pm_init(void)
- 	soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
- }
- 
-+void __init sama7_pm_init(void)
-+{
-+	static const int modes[] __initconst = {
-+		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP1, AT91_PM_BACKUP,
-+	};
-+	static const u32 iomaps[] __initconst = {
-+		[AT91_PM_ULP0]		= AT91_PM_IOMAP(SFRBU),
-+		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SFRBU) |
-+					  AT91_PM_IOMAP(SHDWC),
-+		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SFRBU) |
-+					  AT91_PM_IOMAP(SHDWC),
-+	};
-+
-+	if (!IS_ENABLED(CONFIG_SOC_SAMA7))
-+		return;
-+
-+	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
-+
-+	at91_dt_ramc(true);
-+	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
-+	at91_pm_init(NULL);
-+
-+	soc_pm.ws_ids = sama7g5_ws_ids;
-+	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
-+}
-+
- static int __init at91_pm_modes_select(char *str)
- {
- 	char *s;
---- a/arch/arm/mach-at91/sama7.c
-+++ b/arch/arm/mach-at91/sama7.c
-@@ -17,6 +17,7 @@
- static void __init sama7_dt_device_init(void)
- {
- 	of_platform_default_populate(NULL, NULL, NULL);
-+	sama7_pm_init();
- }
- 
- static const char *const sama7_dt_board_compat[] __initconst = {
diff --git a/target/linux/at91/patches-5.10/219-ARM-at91-pm-add-sama7g5-shdwc.patch b/target/linux/at91/patches-5.10/219-ARM-at91-pm-add-sama7g5-shdwc.patch
deleted file mode 100644
index 062274c18fee..000000000000
--- a/target/linux/at91/patches-5.10/219-ARM-at91-pm-add-sama7g5-shdwc.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 84ff37cc98e6aaefe27d6edd5e3ced2be99d9833 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 15 Apr 2021 13:50:10 +0300
-Subject: [PATCH 219/247] ARM: at91: pm: add sama7g5 shdwc
-
-Add SAMA7G5 SHDWC.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210415105010.569620-25-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -809,6 +809,7 @@ securam_fail:
- static const struct of_device_id atmel_shdwc_ids[] = {
- 	{ .compatible = "atmel,sama5d2-shdwc" },
- 	{ .compatible = "microchip,sam9x60-shdwc" },
-+	{ .compatible = "microchip,sama7g5-shdwc" },
- 	{ /* sentinel. */ }
- };
- 
diff --git a/target/linux/at91/patches-5.10/220-ARM-configs-at91-add-defconfig-for-sama7-family-of-S.patch b/target/linux/at91/patches-5.10/220-ARM-configs-at91-add-defconfig-for-sama7-family-of-S.patch
deleted file mode 100644
index fdb45afa7dfc..000000000000
--- a/target/linux/at91/patches-5.10/220-ARM-configs-at91-add-defconfig-for-sama7-family-of-S.patch
+++ /dev/null
@@ -1,233 +0,0 @@
-From 2223a85aed2d892bd7c13053f27e777c743e5332 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Mon, 28 Jun 2021 15:04:51 +0300
-Subject: [PATCH 220/247] ARM: configs: at91: add defconfig for sama7 family of
- SoCs
-
-Add defconfig for sama7 SoC family.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-[claudiu.beznea@microchip.com: add clocks, ethernet, timers, power]
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-[codrin.ciubotariu@microchip.com: add audio]
-Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-[nicolas.ferre@microchip.com: atags not set, mtd tests, spi gpio]
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210628120452.74408-3-eugen.hristev@microchip.com
----
- arch/arm/configs/sama7_defconfig | 209 +++++++++++++++++++++++++++++++
- 1 file changed, 209 insertions(+)
- create mode 100644 arch/arm/configs/sama7_defconfig
-
---- /dev/null
-+++ b/arch/arm/configs/sama7_defconfig
-@@ -0,0 +1,209 @@
-+# CONFIG_LOCALVERSION_AUTO is not set
-+# CONFIG_SWAP is not set
-+CONFIG_SYSVIPC=y
-+CONFIG_NO_HZ_IDLE=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_LOG_BUF_SHIFT=16
-+CONFIG_CGROUPS=y
-+CONFIG_CGROUP_DEBUG=y
-+CONFIG_NAMESPACES=y
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+CONFIG_BLK_DEV_INITRD=y
-+# CONFIG_FHANDLE is not set
-+# CONFIG_IO_URING is not set
-+CONFIG_KALLSYMS_ALL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_VM_EVENT_COUNTERS is not set
-+CONFIG_SLAB=y
-+CONFIG_ARCH_AT91=y
-+CONFIG_SOC_SAMA7G5=y
-+CONFIG_ATMEL_CLOCKSOURCE_TCB=y
-+# CONFIG_CACHE_L2X0 is not set
-+# CONFIG_ARM_PATCH_IDIV is not set
-+# CONFIG_CPU_SW_DOMAIN_PAN is not set
-+CONFIG_FORCE_MAX_ZONEORDER=15
-+CONFIG_UACCESS_WITH_MEMCPY=y
-+# CONFIG_ATAGS is not set
-+CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel"
-+CONFIG_VFP=y
-+CONFIG_NEON=y
-+CONFIG_KERNEL_MODE_NEON=y
-+CONFIG_MODULES=y
-+CONFIG_MODULE_FORCE_LOAD=y
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_BLK_DEV_BSG is not set
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_COREDUMP is not set
-+# CONFIG_COMPACTION is not set
-+CONFIG_CMA=y
-+CONFIG_NET=y
-+CONFIG_PACKET=y
-+CONFIG_UNIX=y
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_INET_DIAG is not set
-+CONFIG_IPV6_SIT_6RD=y
-+CONFIG_BRIDGE=m
-+CONFIG_BRIDGE_VLAN_FILTERING=y
-+CONFIG_NET_DSA=m
-+CONFIG_VLAN_8021Q=m
-+CONFIG_CAN=y
-+CONFIG_CAN_M_CAN=y
-+CONFIG_CAN_M_CAN_PLATFORM=y
-+CONFIG_BT=y
-+CONFIG_BT_RFCOMM=y
-+CONFIG_BT_RFCOMM_TTY=y
-+CONFIG_BT_BNEP=y
-+CONFIG_BT_BNEP_MC_FILTER=y
-+CONFIG_BT_BNEP_PROTO_FILTER=y
-+CONFIG_BT_HIDP=y
-+CONFIG_BT_HCIBTUSB=y
-+CONFIG_BT_HCIUART=y
-+CONFIG_BT_HCIUART_H4=y
-+CONFIG_BT_HCIVHCI=y
-+CONFIG_CFG80211=m
-+# CONFIG_CFG80211_DEFAULT_PS is not set
-+CONFIG_CFG80211_DEBUGFS=y
-+CONFIG_CFG80211_WEXT=y
-+CONFIG_MAC80211=m
-+CONFIG_MAC80211_LEDS=y
-+CONFIG_RFKILL=y
-+CONFIG_RFKILL_INPUT=y
-+CONFIG_PCCARD=y
-+CONFIG_DEVTMPFS=y
-+CONFIG_DEVTMPFS_MOUNT=y
-+# CONFIG_STANDALONE is not set
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_ALLOW_DEV_COREDUMP is not set
-+CONFIG_MTD=y
-+CONFIG_MTD_TESTS=m
-+CONFIG_MTD_CMDLINE_PARTS=y
-+CONFIG_BLK_DEV_LOOP=y
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=1
-+CONFIG_BLK_DEV_RAM_SIZE=8192
-+CONFIG_EEPROM_AT24=y
-+CONFIG_SCSI=y
-+CONFIG_BLK_DEV_SD=y
-+CONFIG_NETDEVICES=y
-+CONFIG_MACB=y
-+CONFIG_MICREL_PHY=y
-+CONFIG_INPUT_EVDEV=y
-+CONFIG_KEYBOARD_GPIO=y
-+# CONFIG_INPUT_MOUSE is not set
-+CONFIG_LEGACY_PTY_COUNT=4
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_HW_RANDOM=y
-+CONFIG_I2C=y
-+CONFIG_I2C_CHARDEV=y
-+CONFIG_I2C_AT91=y
-+CONFIG_SPI=y
-+CONFIG_SPI_MEM=y
-+CONFIG_SPI_ATMEL=y
-+CONFIG_SPI_GPIO=y
-+CONFIG_PINCTRL_AT91=y
-+CONFIG_PINCTRL_AT91PIO4=y
-+CONFIG_GPIO_SYSFS=y
-+CONFIG_POWER_RESET=y
-+CONFIG_POWER_RESET_AT91_RESET=y
-+CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
-+# CONFIG_HWMON is not set
-+CONFIG_WATCHDOG=y
-+CONFIG_SAMA5D4_WATCHDOG=y
-+CONFIG_MFD_ATMEL_FLEXCOM=y
-+CONFIG_REGULATOR=y
-+CONFIG_REGULATOR_FIXED_VOLTAGE=y
-+CONFIG_REGULATOR_MCP16502=y
-+CONFIG_MEDIA_SUPPORT=y
-+CONFIG_MEDIA_SUPPORT_FILTER=y
-+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-+CONFIG_MEDIA_CAMERA_SUPPORT=y
-+CONFIG_MEDIA_PLATFORM_SUPPORT=y
-+CONFIG_V4L_PLATFORM_DRIVERS=y
-+CONFIG_VIDEO_IMX219=m
-+CONFIG_VIDEO_IMX274=m
-+CONFIG_VIDEO_OV5647=m
-+CONFIG_SOUND=y
-+CONFIG_SND=y
-+CONFIG_SND_SOC=y
-+CONFIG_SND_ATMEL_SOC=y
-+CONFIG_SND_SOC_MIKROE_PROTO=m
-+CONFIG_SND_MCHP_SOC_I2S_MCC=y
-+CONFIG_SND_MCHP_SOC_SPDIFTX=y
-+CONFIG_SND_MCHP_SOC_SPDIFRX=y
-+CONFIG_SND_SOC_PCM5102A=y
-+CONFIG_SND_SOC_SPDIF=y
-+CONFIG_SND_SIMPLE_CARD=y
-+CONFIG_USB=y
-+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-+CONFIG_USB_DYNAMIC_MINORS=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_USB_STORAGE=y
-+CONFIG_USB_UAS=y
-+CONFIG_USB_GADGET=y
-+CONFIG_U_SERIAL_CONSOLE=y
-+CONFIG_USB_ATMEL_USBA=m
-+CONFIG_USB_CONFIGFS=y
-+CONFIG_USB_CONFIGFS_ACM=y
-+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
-+CONFIG_USB_CONFIGFS_F_UVC=y
-+CONFIG_USB_G_SERIAL=m
-+CONFIG_MMC=y
-+CONFIG_MMC_SDHCI=y
-+CONFIG_MMC_SDHCI_PLTFM=y
-+CONFIG_MMC_SDHCI_OF_AT91=y
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+CONFIG_LEDS_GPIO=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+CONFIG_RTC_CLASS=y
-+# CONFIG_RTC_NVMEM is not set
-+CONFIG_RTC_DRV_AT91RM9200=y
-+CONFIG_RTC_DRV_AT91SAM9=y
-+CONFIG_DMADEVICES=y
-+CONFIG_AT_XDMAC=y
-+CONFIG_DMATEST=y
-+CONFIG_STAGING=y
-+CONFIG_MICROCHIP_PIT64B=y
-+# CONFIG_IOMMU_SUPPORT is not set
-+# CONFIG_ATMEL_EBI is not set
-+CONFIG_IIO=y
-+CONFIG_IIO_SW_TRIGGER=y
-+CONFIG_AT91_SAMA5D2_ADC=y
-+CONFIG_PWM=y
-+CONFIG_PWM_ATMEL=y
-+CONFIG_EXT2_FS=y
-+CONFIG_EXT3_FS=y
-+CONFIG_FANOTIFY=y
-+CONFIG_VFAT_FS=y
-+CONFIG_TMPFS=y
-+CONFIG_NFS_FS=y
-+CONFIG_ROOT_NFS=y
-+CONFIG_NLS_CODEPAGE_437=y
-+CONFIG_NLS_CODEPAGE_850=y
-+CONFIG_NLS_ISO8859_1=y
-+CONFIG_NLS_UTF8=y
-+CONFIG_LSM="N"
-+CONFIG_CRYPTO_DEFLATE=y
-+CONFIG_CRYPTO_LZO=y
-+# CONFIG_CRYPTO_HW is not set
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC_ITU_T=y
-+CONFIG_DMA_CMA=y
-+CONFIG_CMA_SIZE_MBYTES=32
-+CONFIG_CMA_ALIGNMENT=9
-+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_DEBUG_MISC is not set
-+# CONFIG_SCHED_DEBUG is not set
-+CONFIG_STACKTRACE=y
-+# CONFIG_FTRACE is not set
-+CONFIG_DEBUG_USER=y
-+# CONFIG_RUNTIME_TESTING_MENU is not set
diff --git a/target/linux/at91/patches-5.10/221-ARM-multi_v7_defconfig-add-sama7g5-SoC.patch b/target/linux/at91/patches-5.10/221-ARM-multi_v7_defconfig-add-sama7g5-SoC.patch
deleted file mode 100644
index 6c95d4a0f5ba..000000000000
--- a/target/linux/at91/patches-5.10/221-ARM-multi_v7_defconfig-add-sama7g5-SoC.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From a62536054548e85da84ed835dc87baa8e5e99b41 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Mon, 28 Jun 2021 15:04:52 +0300
-Subject: [PATCH 221/247] ARM: multi_v7_defconfig: add sama7g5 SoC
-
-Add the Microchip SAMA7G5 ARM v7 Cortex-A7 based SoC to multi_v7_defconfig.
-Also add it's clock timer, the PIT64B.
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210628120452.74408-4-eugen.hristev@microchip.com
----
- arch/arm/configs/multi_v7_defconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm/configs/multi_v7_defconfig
-+++ b/arch/arm/configs/multi_v7_defconfig
-@@ -15,6 +15,7 @@ CONFIG_ARCH_AT91=y
- CONFIG_SOC_SAMA5D2=y
- CONFIG_SOC_SAMA5D3=y
- CONFIG_SOC_SAMA5D4=y
-+CONFIG_SOC_SAMA7G5=y
- CONFIG_ARCH_BCM=y
- CONFIG_ARCH_BCM_CYGNUS=y
- CONFIG_ARCH_BCM_HR2=y
-@@ -967,6 +968,7 @@ CONFIG_APQ_MMCC_8084=y
- CONFIG_MSM_GCC_8660=y
- CONFIG_MSM_MMCC_8960=y
- CONFIG_MSM_MMCC_8974=y
-+CONFIG_MICROCHIP_PIT64B=y
- CONFIG_BCM2835_MBOX=y
- CONFIG_ROCKCHIP_IOMMU=y
- CONFIG_TEGRA_IOMMU_GART=y
diff --git a/target/linux/at91/patches-5.10/222-ARM-dts-at91-add-sama7g5-SoC-DT-and-sama7g5-ek.patch b/target/linux/at91/patches-5.10/222-ARM-dts-at91-add-sama7g5-SoC-DT-and-sama7g5-ek.patch
deleted file mode 100644
index b79ce5ab2e50..000000000000
--- a/target/linux/at91/patches-5.10/222-ARM-dts-at91-add-sama7g5-SoC-DT-and-sama7g5-ek.patch
+++ /dev/null
@@ -1,2154 +0,0 @@
-From 969b39d51b7df0869cca9983b06cefb59dae72b0 Mon Sep 17 00:00:00 2001
-From: Eugen Hristev <eugen.hristev@microchip.com>
-Date: Mon, 28 Jun 2021 15:04:50 +0300
-Subject: [PATCH 222/247] ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek
-
-Add Device Tree for sama7g5 SoC and associated board sama7g5-ek
-
-Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
-[claudiu.beznea@microchip.com: add clocks, ethernet, timers, power]
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-[codrin.ciubotariu@microchip.com: add audio]
-Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-[nicolas.ferre@microchip.com: removed eeproms, reorder i2s dma chans]
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210628120452.74408-2-eugen.hristev@microchip.com
-[claudiu.beznea: adapt to kernel v5.10]
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
----
- arch/arm/boot/dts/Makefile           |   2 +
- arch/arm/boot/dts/at91-sama7g5ek.dts | 656 +++++++++++++++++++
- arch/arm/boot/dts/sama7g5-pinfunc.h  | 923 +++++++++++++++++++++++++++
- arch/arm/boot/dts/sama7g5.dtsi       | 528 +++++++++++++++
- 4 files changed, 2109 insertions(+)
- create mode 100644 arch/arm/boot/dts/at91-sama7g5ek.dts
- create mode 100644 arch/arm/boot/dts/sama7g5-pinfunc.h
- create mode 100644 arch/arm/boot/dts/sama7g5.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -79,6 +79,8 @@ dtb-$(CONFIG_ARCH_ATLAS6) += \
- 	atlas6-evb.dtb
- dtb-$(CONFIG_ARCH_ATLAS7) += \
- 	atlas7-evb.dtb
-+dtb-$(CONFIG_SOC_SAMA7G5) += \
-+	at91-sama7g5ek.dtb
- dtb-$(CONFIG_ARCH_AXXIA) += \
- 	axm5516-amarillo.dtb
- dtb-$(CONFIG_ARCH_BCM2835) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
-@@ -0,0 +1,656 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ *  at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
-+ *
-+ *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
-+ *
-+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
-+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
-+ *
-+ */
-+/dts-v1/;
-+#include "sama7g5-pinfunc.h"
-+#include "sama7g5.dtsi"
-+#include <dt-bindings/mfd/atmel-flexcom.h>
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+	model = "Microchip SAMA7G5-EK";
-+	compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
-+
-+	chosen {
-+		bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	aliases {
-+		serial0 = &uart3;
-+		serial1 = &uart4;
-+		serial2 = &uart7;
-+		serial3 = &uart0;
-+		i2c0 = &i2c1;
-+		i2c1 = &i2c8;
-+		i2c2 = &i2c9;
-+	};
-+
-+	clocks {
-+		slow_xtal {
-+			clock-frequency = <32768>;
-+		};
-+
-+		main_xtal {
-+			clock-frequency = <24000000>;
-+		};
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_key_gpio_default>;
-+
-+		bp1 {
-+			label = "PB_USER";
-+			gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
-+			linux,code = <KEY_PROG1>;
-+			wakeup-source;
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_led_gpio_default>;
-+		status = "okay"; /* Conflict with pwm. */
-+
-+		red_led {
-+			label = "red";
-+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		green_led {
-+			label = "green";
-+			gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		blue_led {
-+			label = "blue";
-+			gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+	};
-+
-+	/* 512 M */
-+	memory@60000000 {
-+		device_type = "memory";
-+		reg = <0x60000000 0x20000000>;
-+	};
-+
-+	sound: sound {
-+		compatible = "simple-audio-card";
-+		simple-audio-card,name = "sama7g5ek audio";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		simple-audio-card,dai-link@0 {
-+			reg = <0>;
-+			cpu {
-+				sound-dai = <&spdiftx>;
-+			};
-+			codec {
-+				sound-dai = <&spdif_out>;
-+			};
-+		};
-+		simple-audio-card,dai-link@1 {
-+			reg = <1>;
-+			cpu {
-+				sound-dai = <&spdifrx>;
-+			};
-+			codec {
-+				sound-dai = <&spdif_in>;
-+			};
-+		};
-+	};
-+
-+	spdif_in: spdif-in {
-+		#sound-dai-cells = <0>;
-+		compatible = "linux,spdif-dir";
-+	};
-+
-+	spdif_out: spdif-out {
-+		#sound-dai-cells = <0>;
-+		compatible = "linux,spdif-dit";
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vddcpu>;
-+};
-+
-+&dma0 {
-+	status = "okay";
-+};
-+
-+&dma1 {
-+	status = "okay";
-+};
-+
-+&dma2 {
-+	status = "okay";
-+};
-+
-+&flx0 {
-+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-+	status = "disabled";
-+
-+	uart0: serial@200 {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_flx0_default>;
-+		status = "disabled";
-+	};
-+};
-+
-+&flx1 {
-+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-+	status = "okay";
-+
-+	i2c1: i2c@600 {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_i2c1_default>;
-+		i2c-analog-filter;
-+		i2c-digital-filter;
-+		i2c-digital-filter-width-ns = <35>;
-+		status = "okay";
-+
-+		mcp16502@5b {
-+			compatible = "microchip,mcp16502";
-+			reg = <0x5b>;
-+			status = "okay";
-+
-+			regulators {
-+				vdd_3v3: VDD_IO {
-+					regulator-name = "VDD_IO";
-+					regulator-min-microvolt = <1200000>;
-+					regulator-max-microvolt = <3700000>;
-+					regulator-initial-mode = <2>;
-+					regulator-allowed-modes = <2>, <4>;
-+					regulator-always-on;
-+
-+					regulator-state-standby {
-+						regulator-on-in-suspend;
-+						regulator-mode = <4>;
-+					};
-+
-+					regulator-state-mem {
-+						regulator-off-in-suspend;
-+						regulator-mode = <4>;
-+					};
-+				};
-+
-+				vddioddr: VDD_DDR {
-+					regulator-name = "VDD_DDR";
-+					regulator-min-microvolt = <1300000>;
-+					regulator-max-microvolt = <1450000>;
-+					regulator-initial-mode = <2>;
-+					regulator-allowed-modes = <2>, <4>;
-+					regulator-always-on;
-+
-+					regulator-state-standby {
-+						regulator-on-in-suspend;
-+						regulator-mode = <4>;
-+					};
-+
-+					regulator-state-mem {
-+						regulator-on-in-suspend;
-+						regulator-mode = <4>;
-+					};
-+				};
-+
-+				vddcore: VDD_CORE {
-+					regulator-name = "VDD_CORE";
-+					regulator-min-microvolt = <1100000>;
-+					regulator-max-microvolt = <1850000>;
-+					regulator-initial-mode = <2>;
-+					regulator-allowed-modes = <2>, <4>;
-+					regulator-always-on;
-+
-+					regulator-state-standby {
-+						regulator-on-in-suspend;
-+						regulator-mode = <4>;
-+					};
-+
-+					regulator-state-mem {
-+						regulator-off-in-suspend;
-+						regulator-mode = <4>;
-+					};
-+				};
-+
-+				vddcpu: VDD_OTHER {
-+					regulator-name = "VDD_OTHER";
-+					regulator-min-microvolt = <1125000>;
-+					regulator-max-microvolt = <1850000>;
-+					regulator-initial-mode = <2>;
-+					regulator-allowed-modes = <2>, <4>;
-+					regulator-ramp-delay = <3125>;
-+					regulator-always-on;
-+
-+					regulator-state-standby {
-+						regulator-on-in-suspend;
-+						regulator-mode = <4>;
-+					};
-+
-+					regulator-state-mem {
-+						regulator-off-in-suspend;
-+						regulator-mode = <4>;
-+					};
-+				};
-+
-+				vldo1: LDO1 {
-+					regulator-name = "LDO1";
-+					regulator-min-microvolt = <1200000>;
-+					regulator-max-microvolt = <3700000>;
-+					regulator-always-on;
-+
-+					regulator-state-standby {
-+						regulator-on-in-suspend;
-+					};
-+
-+					regulator-state-mem {
-+						regulator-off-in-suspend;
-+					};
-+				};
-+
-+				vldo2: LDO2 {
-+					regulator-name = "LDO2";
-+					regulator-min-microvolt = <1200000>;
-+					regulator-max-microvolt = <3700000>;
-+
-+					regulator-state-standby {
-+						regulator-on-in-suspend;
-+					};
-+
-+					regulator-state-mem {
-+						regulator-off-in-suspend;
-+					};
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&flx3 {
-+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-+	status = "okay";
-+
-+	uart3: serial@200 {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_flx3_default>;
-+		status = "okay";
-+	};
-+};
-+
-+&flx4 {
-+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-+	status = "okay";
-+
-+	uart4: serial@200 {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_flx4_default>;
-+		status = "okay";
-+	};
-+};
-+
-+&flx7 {
-+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-+	status = "okay";
-+
-+	uart7: serial@200 {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_flx7_default>;
-+		status = "okay";
-+	};
-+};
-+
-+&flx8 {
-+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-+	status = "okay";
-+
-+	i2c8: i2c@600 {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_i2c8_default>;
-+		i2c-analog-filter;
-+		i2c-digital-filter;
-+		i2c-digital-filter-width-ns = <35>;
-+		status = "okay";
-+	};
-+};
-+
-+&flx9 {
-+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-+	status = "okay";
-+
-+	i2c9: i2c@600 {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_i2c9_default>;
-+		i2c-analog-filter;
-+		i2c-digital-filter;
-+		i2c-digital-filter-width-ns = <35>;
-+		status = "okay";
-+	};
-+};
-+
-+&flx11 {
-+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-+	status = "okay";
-+
-+	spi11: spi@400 {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
-+		status = "okay";
-+	};
-+};
-+
-+&gmac0 {
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>;
-+	phy-mode = "rgmii-id";
-+	status = "okay";
-+
-+	ethernet-phy@7 {
-+		reg = <0x7>;
-+		interrupt-parent = <&pioA>;
-+		interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
-+	};
-+};
-+
-+&gmac1 {
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>;
-+	phy-mode = "rmii";
-+	status = "okay";
-+
-+	ethernet-phy@0 {
-+		reg = <0x0>;
-+		interrupt-parent = <&pioA>;
-+		interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
-+	};
-+};
-+
-+&i2s0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2s0_default>;
-+};
-+
-+&pioA {
-+	pinctrl_flx0_default: flx0_default {
-+		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
-+			 <PIN_PE4__FLEXCOM0_IO1>,
-+			 <PIN_PE6__FLEXCOM0_IO3>,
-+			 <PIN_PE7__FLEXCOM0_IO4>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_flx3_default: flx3_default {
-+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
-+			 <PIN_PD17__FLEXCOM3_IO1>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_flx4_default: flx4_default {
-+		pinmux = <PIN_PD18__FLEXCOM4_IO0>,
-+			 <PIN_PD19__FLEXCOM4_IO1>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_flx7_default: flx7_default {
-+		pinmux = <PIN_PC23__FLEXCOM7_IO0>,
-+			 <PIN_PC24__FLEXCOM7_IO1>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_gmac0_default: gmac0_default {
-+		pinmux = <PIN_PA16__G0_TX0>,
-+			 <PIN_PA17__G0_TX1>,
-+			 <PIN_PA26__G0_TX2>,
-+			 <PIN_PA27__G0_TX3>,
-+			 <PIN_PA19__G0_RX0>,
-+			 <PIN_PA20__G0_RX1>,
-+			 <PIN_PA28__G0_RX2>,
-+			 <PIN_PA29__G0_RX3>,
-+			 <PIN_PA15__G0_TXEN>,
-+			 <PIN_PA30__G0_RXCK>,
-+			 <PIN_PA18__G0_RXDV>,
-+			 <PIN_PA22__G0_MDC>,
-+			 <PIN_PA23__G0_MDIO>,
-+			 <PIN_PA25__G0_125CK>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_gmac0_txck_default: gmac0_txck_default {
-+		pinmux = <PIN_PA24__G0_TXCK>;
-+		bias-pull-up;
-+	};
-+
-+	pinctrl_gmac0_phy_irq: gmac0_phy_irq {
-+		pinmux = <PIN_PA31__GPIO>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_gmac1_default: gmac1_default {
-+		pinmux = <PIN_PD30__G1_TXCK>,
-+			 <PIN_PD22__G1_TX0>,
-+			 <PIN_PD23__G1_TX1>,
-+			 <PIN_PD21__G1_TXEN>,
-+			 <PIN_PD25__G1_RX0>,
-+			 <PIN_PD26__G1_RX1>,
-+			 <PIN_PD27__G1_RXER>,
-+			 <PIN_PD24__G1_RXDV>,
-+			 <PIN_PD28__G1_MDC>,
-+			 <PIN_PD29__G1_MDIO>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_gmac1_phy_irq: gmac1_phy_irq {
-+		pinmux = <PIN_PA21__GPIO>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_i2c1_default: i2c1_default {
-+		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
-+			 <PIN_PC10__FLEXCOM1_IO1>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_i2c8_default: i2c8_default {
-+		pinmux = <PIN_PC14__FLEXCOM8_IO0>,
-+			 <PIN_PC13__FLEXCOM8_IO1>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_i2c9_default: i2c9_default {
-+		pinmux = <PIN_PC18__FLEXCOM9_IO0>,
-+			 <PIN_PC19__FLEXCOM9_IO1>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_i2s0_default: i2s0_default {
-+		pinmux = <PIN_PB23__I2SMCC0_CK>,
-+			 <PIN_PB24__I2SMCC0_WS>,
-+			 <PIN_PB25__I2SMCC0_DOUT1>,
-+			 <PIN_PB26__I2SMCC0_DOUT0>,
-+			 <PIN_PB27__I2SMCC0_MCK>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_key_gpio_default: key_gpio_default {
-+		pinmux = <PIN_PA12__GPIO>;
-+		bias-pull-up;
-+	};
-+
-+	pinctrl_led_gpio_default: led_gpio_default {
-+		pinmux = <PIN_PA13__GPIO>,
-+			 <PIN_PB8__GPIO>,
-+			 <PIN_PD20__GPIO>;
-+		bias-pull-up;
-+	};
-+
-+	pinctrl_mikrobus1_an_default: mikrobus1_an_default {
-+		pinmux = <PIN_PD0__GPIO>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_mikrobus2_an_default: mikrobus2_an_default {
-+		pinmux = <PIN_PD1__GPIO>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
-+		pinmux = <PIN_PA13__PWMH2>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
-+		pinmux = <PIN_PD20__PWMH3>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
-+		pinmux = <PIN_PB6__FLEXCOM11_IO3>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_mikrobus1_spi: mikrobus1_spi {
-+		pinmux = <PIN_PB3__FLEXCOM11_IO0>,
-+			 <PIN_PB4__FLEXCOM11_IO1>,
-+			 <PIN_PB5__FLEXCOM11_IO2>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_sdmmc0_default: sdmmc0_default {
-+		cmd_data {
-+			pinmux = <PIN_PA1__SDMMC0_CMD>,
-+				 <PIN_PA3__SDMMC0_DAT0>,
-+				 <PIN_PA4__SDMMC0_DAT1>,
-+				 <PIN_PA5__SDMMC0_DAT2>,
-+				 <PIN_PA6__SDMMC0_DAT3>,
-+				 <PIN_PA7__SDMMC0_DAT4>,
-+				 <PIN_PA8__SDMMC0_DAT5>,
-+				 <PIN_PA9__SDMMC0_DAT6>,
-+				 <PIN_PA10__SDMMC0_DAT7>;
-+			bias-pull-up;
-+		};
-+
-+		ck_cd_rstn_vddsel {
-+			pinmux = <PIN_PA0__SDMMC0_CK>,
-+				 <PIN_PA2__SDMMC0_RSTN>,
-+				 <PIN_PA11__SDMMC0_DS>;
-+			bias-pull-up;
-+		};
-+	};
-+
-+	pinctrl_sdmmc1_default: sdmmc1_default {
-+		cmd_data {
-+			pinmux = <PIN_PB29__SDMMC1_CMD>,
-+				 <PIN_PB31__SDMMC1_DAT0>,
-+				 <PIN_PC0__SDMMC1_DAT1>,
-+				 <PIN_PC1__SDMMC1_DAT2>,
-+				 <PIN_PC2__SDMMC1_DAT3>;
-+			bias-pull-up;
-+		};
-+
-+		ck_cd_rstn_vddsel {
-+			pinmux = <PIN_PB30__SDMMC1_CK>,
-+				 <PIN_PB28__SDMMC1_RSTN>,
-+				 <PIN_PC5__SDMMC1_1V8SEL>,
-+				 <PIN_PC4__SDMMC1_CD>;
-+			bias-pull-up;
-+		};
-+	};
-+
-+	pinctrl_sdmmc2_default: sdmmc2_default {
-+		cmd_data {
-+			pinmux = <PIN_PD3__SDMMC2_CMD>,
-+				 <PIN_PD5__SDMMC2_DAT0>,
-+				 <PIN_PD6__SDMMC2_DAT1>,
-+				 <PIN_PD7__SDMMC2_DAT2>,
-+				 <PIN_PD8__SDMMC2_DAT3>;
-+			bias-pull-up;
-+		};
-+
-+		ck {
-+			pinmux = <PIN_PD4__SDMMC2_CK>;
-+			bias-pull-up;
-+		};
-+	};
-+
-+	pinctrl_spdifrx_default: spdifrx_default {
-+		pinmux = <PIN_PB0__SPDIF_RX>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_spdiftx_default: spdiftx_default {
-+		pinmux = <PIN_PB1__SPDIF_TX>;
-+		bias-disable;
-+	};
-+};
-+
-+&pwm {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
-+	status = "disabled"; /* Conflict with leds. */
-+};
-+
-+&rtt {
-+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-+};
-+
-+&sdmmc0 {
-+	bus-width = <8>;
-+	non-removable;
-+	no-1-8-v;
-+	sdhci-caps-mask = <0x0 0x00200000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
-+	status = "okay";
-+};
-+
-+&sdmmc1 {
-+	bus-width = <4>;
-+	no-1-8-v;
-+	sdhci-caps-mask = <0x0 0x00200000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
-+	status = "okay";
-+};
-+
-+&sdmmc2 {
-+	bus-width = <4>;
-+	no-1-8-v;
-+	sdhci-caps-mask = <0x0 0x00200000>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_sdmmc2_default>;
-+};
-+
-+&spdifrx {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_spdifrx_default>;
-+	status = "okay";
-+};
-+
-+&spdiftx {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_spdiftx_default>;
-+	status = "okay";
-+};
-+
-+&trng {
-+	status = "okay";
-+};
-+
-+&vddout25 {
-+	vin-supply = <&vdd_3v3>;
-+	status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/sama7g5-pinfunc.h
-@@ -0,0 +1,923 @@
-+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
-+#define PINMUX_PIN(no, func, ioset) \
-+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
-+
-+#define PIN_PA0				0
-+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
-+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
-+#define PIN_PA0__FLEXCOM0_IO0		PINMUX_PIN(PIN_PA0, 2, 1)
-+#define PIN_PA0__CANTX3			PINMUX_PIN(PIN_PA0, 3, 1)
-+#define PIN_PA0__PWML0			PINMUX_PIN(PIN_PA0, 5, 2)
-+#define PIN_PA1				1
-+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
-+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
-+#define PIN_PA1__FLEXCOM0_IO1		PINMUX_PIN(PIN_PA1, 2, 1)
-+#define PIN_PA1__CANRX3			PINMUX_PIN(PIN_PA1, 3, 1)
-+#define PIN_PA1__D14			PINMUX_PIN(PIN_PA1, 4, 1)
-+#define PIN_PA1__PWMH0			PINMUX_PIN(PIN_PA1, 5, 3)
-+#define PIN_PA2				2
-+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
-+#define PIN_PA2__SDMMC0_RSTN		PINMUX_PIN(PIN_PA2, 1, 1)
-+#define PIN_PA2__FLEXCOM0_IO2		PINMUX_PIN(PIN_PA2, 2, 1)
-+#define PIN_PA2__PDMC1_CLK		PINMUX_PIN(PIN_PA2, 3, 1)
-+#define PIN_PA2__D15			PINMUX_PIN(PIN_PA2, 4, 1)
-+#define PIN_PA2__PWMH1			PINMUX_PIN(PIN_PA2, 5, 3)
-+#define PIN_PA2__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA2, 6, 3)
-+#define PIN_PA3				3
-+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
-+#define PIN_PA3__SDMMC0_DAT0		PINMUX_PIN(PIN_PA3, 1, 1)
-+#define PIN_PA3__FLEXCOM0_IO3		PINMUX_PIN(PIN_PA3, 2, 1)
-+#define PIN_PA3__PDMC1_DS0		PINMUX_PIN(PIN_PA3, 3, 1)
-+#define PIN_PA3__NWR1_NBS1		PINMUX_PIN(PIN_PA3, 4, 1)
-+#define PIN_PA3__PWML3			PINMUX_PIN(PIN_PA3, 5, 3)
-+#define PIN_PA3__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA3, 6, 3)
-+#define PIN_PA4				4
-+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
-+#define PIN_PA4__SDMMC0_DAT1		PINMUX_PIN(PIN_PA4, 1, 1)
-+#define PIN_PA4__FLEXCOM0_IO4		PINMUX_PIN(PIN_PA4, 2, 1)
-+#define PIN_PA4__PDMC1_DS1		PINMUX_PIN(PIN_PA4, 3, 1)
-+#define PIN_PA4__NCS2			PINMUX_PIN(PIN_PA4, 4, 1)
-+#define PIN_PA4__PWMH3			PINMUX_PIN(PIN_PA4, 5, 3)
-+#define PIN_PA4__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA4, 6, 3)
-+#define PIN_PA5				5
-+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
-+#define PIN_PA5__SDMMC0_DAT2		PINMUX_PIN(PIN_PA5, 1, 1)
-+#define PIN_PA5__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA5, 2, 1)
-+#define PIN_PA5__CANTX2			PINMUX_PIN(PIN_PA5, 3, 1)
-+#define PIN_PA5__A23			PINMUX_PIN(PIN_PA5, 4, 1)
-+#define PIN_PA5__PWMEXTRG0		PINMUX_PIN(PIN_PA5, 5, 3)
-+#define PIN_PA5__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA5, 6, 3)
-+#define PIN_PA6				6
-+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
-+#define PIN_PA6__SDMMC0_DAT3		PINMUX_PIN(PIN_PA6, 1, 1)
-+#define PIN_PA6__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA6, 2, 1)
-+#define PIN_PA6__CANRX2			PINMUX_PIN(PIN_PA6, 3, 1)
-+#define PIN_PA6__A24			PINMUX_PIN(PIN_PA6, 4, 1)
-+#define PIN_PA6__PWMEXTRG1		PINMUX_PIN(PIN_PA6, 5, 3)
-+#define PIN_PA6__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA6, 6, 3)
-+#define PIN_PA7				7
-+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
-+#define PIN_PA7__SDMMC0_DAT4		PINMUX_PIN(PIN_PA7, 1, 1)
-+#define PIN_PA7__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
-+#define PIN_PA7__CANTX1			PINMUX_PIN(PIN_PA7, 3, 1)
-+#define PIN_PA7__NWAIT			PINMUX_PIN(PIN_PA7, 4, 1)
-+#define PIN_PA7__PWMFI0			PINMUX_PIN(PIN_PA7, 5, 3)
-+#define PIN_PA7__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA7, 6, 3)
-+#define PIN_PA8				8
-+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
-+#define PIN_PA8__SDMMC0_DAT5		PINMUX_PIN(PIN_PA8, 1, 1)
-+#define PIN_PA8__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
-+#define PIN_PA8__CANRX1			PINMUX_PIN(PIN_PA8, 3, 1)
-+#define PIN_PA8__NCS0			PINMUX_PIN(PIN_PA8, 4, 1)
-+#define PIN_PA8__PWMIF1			PINMUX_PIN(PIN_PA8, 5, 3)
-+#define PIN_PA8__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA8, 6, 3)
-+#define PIN_PA9				9
-+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
-+#define PIN_PA9__SDMMC0_DAT6		PINMUX_PIN(PIN_PA9, 1, 1)
-+#define PIN_PA9__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
-+#define PIN_PA9__CANTX0			PINMUX_PIN(PIN_PA9, 3, 1)
-+#define PIN_PA9__SMCK			PINMUX_PIN(PIN_PA9, 4, 1)
-+#define PIN_PA9__SPDIF_RX		PINMUX_PIN(PIN_PA9, 5, 1)
-+#define PIN_PA9__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA9, 6, 3)
-+#define PIN_PA10			10
-+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
-+#define PIN_PA10__SDMMC0_DAT7		PINMUX_PIN(PIN_PA10, 1, 1)
-+#define PIN_PA10__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
-+#define PIN_PA10__CANRX0		PINMUX_PIN(PIN_PA10, 3, 1)
-+#define PIN_PA10__NCS1			PINMUX_PIN(PIN_PA10, 4, 1)
-+#define PIN_PA10__SPDIF_TX		PINMUX_PIN(PIN_PA10, 5, 1)
-+#define PIN_PA10__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA10, 6, 3)
-+#define PIN_PA11			11
-+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
-+#define PIN_PA11__SDMMC0_DS		PINMUX_PIN(PIN_PA11, 1, 1)
-+#define PIN_PA11__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA11, 2, 1)
-+#define PIN_PA11__A0_NBS0		PINMUX_PIN(PIN_PA11, 4, 1)
-+#define PIN_PA11__TIOA0			PINMUX_PIN(PIN_PA11, 5, 1)
-+#define PIN_PA11__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA11, 6, 3)
-+#define PIN_PA12			12
-+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
-+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
-+#define PIN_PA12__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA12, 2, 1)
-+#define PIN_PA12__FLEXCOM3_IO5		PINMUX_PIN(PIN_PA12, 4, 1)
-+#define PIN_PA12__PWML2			PINMUX_PIN(PIN_PA12, 5, 3)
-+#define PIN_PA12__FLEXCOM6_IO0		PINMUX_PIN(PIN_PA12, 6, 3)
-+#define PIN_PA13			13
-+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
-+#define PIN_PA13__SDMMC0_1V8SEL		PINMUX_PIN(PIN_PA13, 1, 1)
-+#define PIN_PA13__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA13, 2, 1)
-+#define PIN_PA13__FLEXCOM3_IO6		PINMUX_PIN(PIN_PA13, 4, 1)
-+#define PIN_PA13__PWMH2			PINMUX_PIN(PIN_PA13, 5, 3)
-+#define PIN_PA13__FLEXCOM6_IO1		PINMUX_PIN(PIN_PA13, 6, 3)
-+#define PIN_PA14			14
-+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
-+#define PIN_PA14__SDMMC0_CD		PINMUX_PIN(PIN_PA14, 1, 1)
-+#define PIN_PA14__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA14, 2, 1)
-+#define PIN_PA14__A25			PINMUX_PIN(PIN_PA14, 4, 1)
-+#define PIN_PA14__PWML1			PINMUX_PIN(PIN_PA14, 5, 3)
-+#define PIN_PA15			15
-+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
-+#define PIN_PA15__G0_TXEN		PINMUX_PIN(PIN_PA15, 1, 1)
-+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 2, 1)
-+#define PIN_PA15__ISC_MCK		PINMUX_PIN(PIN_PA15, 3, 1)
-+#define PIN_PA15__A1			PINMUX_PIN(PIN_PA15, 4, 1)
-+#define PIN_PA15__TIOB0			PINMUX_PIN(PIN_PA15, 5, 1)
-+#define PIN_PA16			16
-+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
-+#define PIN_PA16__G0_TX0		PINMUX_PIN(PIN_PA16, 1, 1)
-+#define PIN_PA16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA16, 2, 1)
-+#define PIN_PA16__ISC_D0		PINMUX_PIN(PIN_PA16, 3, 1)
-+#define PIN_PA16__A2			PINMUX_PIN(PIN_PA16, 4, 1)
-+#define PIN_PA16__TCLK0			PINMUX_PIN(PIN_PA16, 5, 1)
-+#define PIN_PA17			17
-+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
-+#define PIN_PA17__G0_TX1		PINMUX_PIN(PIN_PA17, 1, 1)
-+#define PIN_PA17__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA17, 2, 1)
-+#define PIN_PA17__ISC_D1		PINMUX_PIN(PIN_PA17, 3, 1)
-+#define PIN_PA17__A3			PINMUX_PIN(PIN_PA17, 4, 1)
-+#define PIN_PA17__TIOA1			PINMUX_PIN(PIN_PA17, 5, 1)
-+#define PIN_PA18			18
-+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
-+#define PIN_PA18__G0_RXDV		PINMUX_PIN(PIN_PA18, 1, 1)
-+#define PIN_PA18__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA18, 2, 1)
-+#define PIN_PA18__ISC_D2		PINMUX_PIN(PIN_PA18, 3, 1)
-+#define PIN_PA18__A4			PINMUX_PIN(PIN_PA18, 4, 1)
-+#define PIN_PA18__TIOB1			PINMUX_PIN(PIN_PA18, 5, 1)
-+#define PIN_PA19			19
-+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
-+#define PIN_PA19__G0_RX0		PINMUX_PIN(PIN_PA19, 1, 1)
-+#define PIN_PA19__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA19, 2, 1)
-+#define PIN_PA19__ISC_D3		PINMUX_PIN(PIN_PA19, 3, 1)
-+#define PIN_PA19__A5			PINMUX_PIN(PIN_PA19, 4, 1)
-+#define PIN_PA19__TCLK1			PINMUX_PIN(PIN_PA19, 5, 1)
-+#define PIN_PA20			20
-+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
-+#define PIN_PA20__G0_RX1		PINMUX_PIN(PIN_PA20, 1, 1)
-+#define PIN_PA20__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA20, 2, 1)
-+#define PIN_PA20__ISC_D4		PINMUX_PIN(PIN_PA20, 3, 1)
-+#define PIN_PA20__A6			PINMUX_PIN(PIN_PA20, 4, 1)
-+#define PIN_PA20__TIOA2			PINMUX_PIN(PIN_PA20, 5, 1)
-+#define PIN_PA21			21
-+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
-+#define PIN_PA21__G0_RXER		PINMUX_PIN(PIN_PA21, 1, 1)
-+#define PIN_PA21__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA21, 2, 1)
-+#define PIN_PA21__ISC_D5		PINMUX_PIN(PIN_PA21, 3, 1)
-+#define PIN_PA21__A7			PINMUX_PIN(PIN_PA21, 4, 1)
-+#define PIN_PA21__TIOB2			PINMUX_PIN(PIN_PA21, 5, 1)
-+#define PIN_PA22			22
-+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
-+#define PIN_PA22__G0_MDC		PINMUX_PIN(PIN_PA22, 1, 1)
-+#define PIN_PA22__FLEXCOM4_IO2		PINMUX_PIN(PIN_PA22, 2, 1)
-+#define PIN_PA22__ISC_D6		PINMUX_PIN(PIN_PA22, 3, 1)
-+#define PIN_PA22__A8			PINMUX_PIN(PIN_PA22, 4, 1)
-+#define PIN_PA22__TCLK2			PINMUX_PIN(PIN_PA22, 5, 1)
-+#define PIN_PA23			23
-+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
-+#define PIN_PA23__G0_MDIO		PINMUX_PIN(PIN_PA23, 1, 1)
-+#define PIN_PA23__FLEXCOM4_IO3		PINMUX_PIN(PIN_PA23, 2, 1)
-+#define PIN_PA23__ISC_D7		PINMUX_PIN(PIN_PA23, 3, 1)
-+#define PIN_PA23__A9			PINMUX_PIN(PIN_PA23, 4, 1)
-+#define PIN_PA24			24
-+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
-+#define PIN_PA24__G0_TXCK		PINMUX_PIN(PIN_PA24, 1, 1)
-+#define PIN_PA24__FLEXCOM4_IO4		PINMUX_PIN(PIN_PA24, 2, 1)
-+#define PIN_PA24__ISC_HSYNC		PINMUX_PIN(PIN_PA24, 3, 1)
-+#define PIN_PA24__A10			PINMUX_PIN(PIN_PA24, 4, 1)
-+#define PIN_PA24__FLEXCOM0_IO5		PINMUX_PIN(PIN_PA24, 5, 1)
-+#define PIN_PA25			25
-+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
-+#define PIN_PA25__G0_125CK		PINMUX_PIN(PIN_PA25, 1, 1)
-+#define PIN_PA25__FLEXCOM5_IO4		PINMUX_PIN(PIN_PA25, 2, 1)
-+#define PIN_PA25__ISC_VSYNC		PINMUX_PIN(PIN_PA25, 3, 1)
-+#define PIN_PA25__A11			PINMUX_PIN(PIN_PA25, 4, 1)
-+#define PIN_PA25__FLEXCOM0_IO6		PINMUX_PIN(PIN_PA25, 5, 1)
-+#define PIN_PA25__FLEXCOM7_IO0		PINMUX_PIN(PIN_PA25, 6, 3)
-+#define PIN_PA26			26
-+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
-+#define PIN_PA26__G0_TX2		PINMUX_PIN(PIN_PA26, 1, 1)
-+#define PIN_PA26__FLEXCOM5_IO2		PINMUX_PIN(PIN_PA26, 2, 1)
-+#define PIN_PA26__ISC_FIELD		PINMUX_PIN(PIN_PA26, 3, 1)
-+#define PIN_PA26__A12			PINMUX_PIN(PIN_PA26, 4, 1)
-+#define PIN_PA26__TF0			PINMUX_PIN(PIN_PA26, 5, 1)
-+#define PIN_PA26__FLEXCOM7_IO1		PINMUX_PIN(PIN_PA26, 6, 3)
-+#define PIN_PA27			27
-+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
-+#define PIN_PA27__G0_TX3		PINMUX_PIN(PIN_PA27, 1, 1)
-+#define PIN_PA27__FLEXCOM5_IO3		PINMUX_PIN(PIN_PA27, 2, 1)
-+#define PIN_PA27__ISC_PCK		PINMUX_PIN(PIN_PA27, 3, 1)
-+#define PIN_PA27__A13			PINMUX_PIN(PIN_PA27, 4, 1)
-+#define PIN_PA27__TK0			PINMUX_PIN(PIN_PA27, 5, 1)
-+#define PIN_PA27__FLEXCOM8_IO0		PINMUX_PIN(PIN_PA27, 6, 3)
-+#define PIN_PA28			28
-+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
-+#define PIN_PA28__G0_RX2		PINMUX_PIN(PIN_PA28, 1, 1)
-+#define PIN_PA28__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA28, 2, 1)
-+#define PIN_PA28__ISC_D8		PINMUX_PIN(PIN_PA28, 3, 1)
-+#define PIN_PA28__A14			PINMUX_PIN(PIN_PA28, 4, 1)
-+#define PIN_PA28__RD0			PINMUX_PIN(PIN_PA28, 5, 1)
-+#define PIN_PA28__FLEXCOM8_IO1		PINMUX_PIN(PIN_PA28, 6, 3)
-+#define PIN_PA29			29
-+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
-+#define PIN_PA29__G0_RX3		PINMUX_PIN(PIN_PA29, 1, 1)
-+#define PIN_PA29__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA29, 2, 1)
-+#define PIN_PA29__ISC_D9		PINMUX_PIN(PIN_PA29, 3, 1)
-+#define PIN_PA29__A15			PINMUX_PIN(PIN_PA29, 4, 1)
-+#define PIN_PA29__RF0			PINMUX_PIN(PIN_PA29, 5, 1)
-+#define PIN_PA29__FLEXCOM9_IO0		PINMUX_PIN(PIN_PA29, 6, 3)
-+#define PIN_PA30			30
-+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
-+#define PIN_PA30__G0_RXCK		PINMUX_PIN(PIN_PA30, 1, 1)
-+#define PIN_PA30__FLEXCOM6_IO4		PINMUX_PIN(PIN_PA30, 2, 1)
-+#define PIN_PA30__ISC_D10		PINMUX_PIN(PIN_PA30, 3, 1)
-+#define PIN_PA30__A16			PINMUX_PIN(PIN_PA30, 4, 1)
-+#define PIN_PA30__RK0			PINMUX_PIN(PIN_PA30, 5, 1)
-+#define PIN_PA30__FLEXCOM9_IO1		PINMUX_PIN(PIN_PA30, 6, 3)
-+#define PIN_PA31			31
-+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
-+#define PIN_PA31__G0_TXER		PINMUX_PIN(PIN_PA31, 1, 1)
-+#define PIN_PA31__FLEXCOM6_IO2		PINMUX_PIN(PIN_PA31, 2, 1)
-+#define PIN_PA31__ISC_D11		PINMUX_PIN(PIN_PA31, 3, 1)
-+#define PIN_PA31__A17			PINMUX_PIN(PIN_PA31, 4, 1)
-+#define PIN_PA31__TD0			PINMUX_PIN(PIN_PA31, 5, 1)
-+#define PIN_PA31__FLEXCOM10_IO0		PINMUX_PIN(PIN_PA31, 6, 3)
-+#define PIN_PB0				32
-+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
-+#define PIN_PB0__G0_COL			PINMUX_PIN(PIN_PB0, 1, 1)
-+#define PIN_PB0__FLEXCOM6_IO3		PINMUX_PIN(PIN_PB0, 2, 2)
-+#define PIN_PB0__EXT_IRQ0		PINMUX_PIN(PIN_PB0, 3, 1)
-+#define PIN_PB0__A18			PINMUX_PIN(PIN_PB0, 4, 1)
-+#define PIN_PB0__SPDIF_RX		PINMUX_PIN(PIN_PB0, 5, 2)
-+#define PIN_PB0__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB0, 6, 3)
-+#define PIN_PB1				33
-+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
-+#define PIN_PB1__G0_CRS			PINMUX_PIN(PIN_PB1, 1, 1)
-+#define PIN_PB1__FLEXCOM6_IO1		PINMUX_PIN(PIN_PB1, 2, 2)
-+#define PIN_PB1__EXT_IRQ1		PINMUX_PIN(PIN_PB1, 3, 1)
-+#define PIN_PB1__A19			PINMUX_PIN(PIN_PB1, 4, 1)
-+#define PIN_PB1__SPDIF_TX		PINMUX_PIN(PIN_PB1, 5, 2)
-+#define PIN_PB1__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB1, 6, 3)
-+#define PIN_PB2				34
-+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
-+#define PIN_PB2__G0_TSUCOMP		PINMUX_PIN(PIN_PB2, 1, 1)
-+#define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
-+#define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
-+#define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
-+#define PIN_PB2__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB2, 6, 3)
-+#define PIN_PB3				35
-+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
-+#define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)
-+#define PIN_PB3__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB3, 2, 1)
-+#define PIN_PB3__PCK2			PINMUX_PIN(PIN_PB3, 3, 2)
-+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 4, 1)
-+#define PIN_PB4				36
-+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
-+#define PIN_PB4__TF1			PINMUX_PIN(PIN_PB4, 1, 1)
-+#define PIN_PB4__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB4, 2, 1)
-+#define PIN_PB4__PCK3			PINMUX_PIN(PIN_PB4, 3, 2)
-+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 4, 1)
-+#define PIN_PB5				37
-+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
-+#define PIN_PB5__TK1			PINMUX_PIN(PIN_PB5, 1, 1)
-+#define PIN_PB5__FLEXCOM11_IO2		PINMUX_PIN(PIN_PB5, 2, 1)
-+#define PIN_PB5__PCK4			PINMUX_PIN(PIN_PB5, 3, 2)
-+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 4, 1)
-+#define PIN_PB6				38
-+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
-+#define PIN_PB6__RK1			PINMUX_PIN(PIN_PB6, 1, 1)
-+#define PIN_PB6__FLEXCOM11_IO3		PINMUX_PIN(PIN_PB6, 2, 1)
-+#define PIN_PB6__PCK5			PINMUX_PIN(PIN_PB6, 3, 2)
-+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 4, 1)
-+#define PIN_PB7				39
-+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
-+#define PIN_PB7__TD1			PINMUX_PIN(PIN_PB7, 1, 1)
-+#define PIN_PB7__FLEXCOM11_IO4		PINMUX_PIN(PIN_PB7, 2, 1)
-+#define PIN_PB7__FLEXCOM3_IO5		PINMUX_PIN(PIN_PB7, 3, 2)
-+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 4, 1)
-+#define PIN_PB8				40
-+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
-+#define PIN_PB8__RD1			PINMUX_PIN(PIN_PB8, 1, 1)
-+#define PIN_PB8__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB8, 2, 1)
-+#define PIN_PB8__FLEXCOM3_IO6		PINMUX_PIN(PIN_PB8, 3, 2)
-+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 4, 1)
-+#define PIN_PB9				41
-+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
-+#define PIN_PB9__QSPI0_IO3		PINMUX_PIN(PIN_PB9, 1, 1)
-+#define PIN_PB9__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB9, 2, 1)
-+#define PIN_PB9__PDMC0_CLK		PINMUX_PIN(PIN_PB9, 3, 1)
-+#define PIN_PB9__NCS3_NANDCS		PINMUX_PIN(PIN_PB9, 4, 1)
-+#define PIN_PB9__PWML0			PINMUX_PIN(PIN_PB9, 5, 2)
-+#define PIN_PB10			42
-+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
-+#define PIN_PB10__QSPI0_IO2		PINMUX_PIN(PIN_PB10, 1, 1)
-+#define PIN_PB10__FLEXCOM8_IO2		PINMUX_PIN(PIN_PB10, 2, 1)
-+#define PIN_PB10__PDMC0_DS0		PINMUX_PIN(PIN_PB10, 3, 1)
-+#define PIN_PB10__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PB10, 4, 1)
-+#define PIN_PB10__PWMH0			PINMUX_PIN(PIN_PB10, 5, 2)
-+#define PIN_PB11			43
-+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
-+#define PIN_PB11__QSPI0_IO1		PINMUX_PIN(PIN_PB11, 1, 1)
-+#define PIN_PB11__FLEXCOM8_IO3		PINMUX_PIN(PIN_PB11, 2, 1)
-+#define PIN_PB11__PDMC0_DS1		PINMUX_PIN(PIN_PB11, 3, 1)
-+#define PIN_PB11__NRD_NANDOE		PINMUX_PIN(PIN_PB11, 4, 1)
-+#define PIN_PB11__PWML1			PINMUX_PIN(PIN_PB11, 5, 2)
-+#define PIN_PB12			44
-+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
-+#define PIN_PB12__QSPI0_IO0		PINMUX_PIN(PIN_PB12, 1, 1)
-+#define PIN_PB12__FLEXCOM8_IO4		PINMUX_PIN(PIN_PB12, 2, 1)
-+#define PIN_PB12__FLEXCOM6_IO5		PINMUX_PIN(PIN_PB12, 3, 1)
-+#define PIN_PB12__A21_NANDALE		PINMUX_PIN(PIN_PB12, 4, 1)
-+#define PIN_PB12__PWMH1			PINMUX_PIN(PIN_PB12, 5, 2)
-+#define PIN_PB13			45
-+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
-+#define PIN_PB13__QSPI0_CS		PINMUX_PIN(PIN_PB13, 1, 1)
-+#define PIN_PB13__FLEXCOM9_IO0		PINMUX_PIN(PIN_PB13, 2, 1)
-+#define PIN_PB13__FLEXCOM6_IO6		PINMUX_PIN(PIN_PB13, 3, 1)
-+#define PIN_PB13__A22_NANDCLE		PINMUX_PIN(PIN_PB13, 4, 1)
-+#define PIN_PB13__PWML2			PINMUX_PIN(PIN_PB13, 5, 2)
-+#define PIN_PB14			46
-+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
-+#define PIN_PB14__QSPI0_SCK		PINMUX_PIN(PIN_PB14, 1, 1)
-+#define PIN_PB14__FLEXCOM9_IO1		PINMUX_PIN(PIN_PB14, 2, 1)
-+#define PIN_PB14__D0			PINMUX_PIN(PIN_PB14, 4, 1)
-+#define PIN_PB14__PWMH2			PINMUX_PIN(PIN_PB14, 5, 2)
-+#define PIN_PB15			47
-+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
-+#define PIN_PB15__QSPI0_SCKN		PINMUX_PIN(PIN_PB15, 1, 1)
-+#define PIN_PB15__FLEXCOM9_IO2		PINMUX_PIN(PIN_PB15, 2, 1)
-+#define PIN_PB15__D1			PINMUX_PIN(PIN_PB15, 4, 1)
-+#define PIN_PB15__PWML3			PINMUX_PIN(PIN_PB15, 5, 2)
-+#define PIN_PB16			48
-+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
-+#define PIN_PB16__QSPI0_IO4		PINMUX_PIN(PIN_PB16, 1, 1)
-+#define PIN_PB16__FLEXCOM9_IO3		PINMUX_PIN(PIN_PB16, 2, 1)
-+#define PIN_PB16__PCK0			PINMUX_PIN(PIN_PB16, 3, 1)
-+#define PIN_PB16__D2			PINMUX_PIN(PIN_PB16, 4, 1)
-+#define PIN_PB16__PWMH3			PINMUX_PIN(PIN_PB16, 5, 2)
-+#define PIN_PB16__EXT_IRQ0		PINMUX_PIN(PIN_PB16, 6, 2)
-+#define PIN_PB17			49
-+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
-+#define PIN_PB17__QSPI0_IO5		PINMUX_PIN(PIN_PB17, 1, 1)
-+#define PIN_PB17__FLEXCOM9_IO4		PINMUX_PIN(PIN_PB17, 2, 1)
-+#define PIN_PB17__PCK1			PINMUX_PIN(PIN_PB17, 3, 1)
-+#define PIN_PB17__D3			PINMUX_PIN(PIN_PB17, 4, 1)
-+#define PIN_PB17__PWMEXTRG0		PINMUX_PIN(PIN_PB17, 5, 2)
-+#define PIN_PB17__EXT_IRQ1		PINMUX_PIN(PIN_PB17, 6, 2)
-+#define PIN_PB18			50
-+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
-+#define PIN_PB18__QSPI0_IO6		PINMUX_PIN(PIN_PB18, 1, 1)
-+#define PIN_PB18__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB18, 2, 1)
-+#define PIN_PB18__PCK2			PINMUX_PIN(PIN_PB18, 3, 1)
-+#define PIN_PB18__D4			PINMUX_PIN(PIN_PB18, 4, 1)
-+#define PIN_PB18__PWMEXTRG1		PINMUX_PIN(PIN_PB18, 5, 2)
-+#define PIN_PB19			51
-+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
-+#define PIN_PB19__QSPI0_IO7		PINMUX_PIN(PIN_PB19, 1, 1)
-+#define PIN_PB19__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB19, 2, 1)
-+#define PIN_PB19__PCK3			PINMUX_PIN(PIN_PB19, 3, 1)
-+#define PIN_PB19__D5			PINMUX_PIN(PIN_PB19, 4, 1)
-+#define PIN_PB19__PWMFI0		PINMUX_PIN(PIN_PB19, 5, 2)
-+#define PIN_PB20			52
-+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
-+#define PIN_PB20__QSPI0_DQS		PINMUX_PIN(PIN_PB20, 1, 1)
-+#define PIN_PB20__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB20, 2, 1)
-+#define PIN_PB20__D6			PINMUX_PIN(PIN_PB20, 4, 1)
-+#define PIN_PB20__PWMFI1		PINMUX_PIN(PIN_PB20, 5, 2)
-+#define PIN_PB21			53
-+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
-+#define PIN_PB21__QSPI0_INT		PINMUX_PIN(PIN_PB21, 1, 1)
-+#define PIN_PB21__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB21, 2, 1)
-+#define PIN_PB21__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB21, 3, 1)
-+#define PIN_PB21__D7			PINMUX_PIN(PIN_PB21, 4, 1)
-+#define PIN_PB22			54
-+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
-+#define PIN_PB22__QSPI1_IO3		PINMUX_PIN(PIN_PB22, 1, 1)
-+#define PIN_PB22__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB22, 2, 1)
-+#define PIN_PB22__FLEXCOM9_IO6		PINMUX_PIN(PIN_PB22, 3, 1)
-+#define PIN_PB22__NANDRDY		PINMUX_PIN(PIN_PB22, 4, 1)
-+#define PIN_PB23			55
-+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
-+#define PIN_PB23__QSPI1_IO2		PINMUX_PIN(PIN_PB23, 1, 1)
-+#define PIN_PB23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB23, 2, 1)
-+#define PIN_PB23__I2SMCC0_CK		PINMUX_PIN(PIN_PB23, 3, 1)
-+#define PIN_PB23__PCK4			PINMUX_PIN(PIN_PB23, 6, 1)
-+#define PIN_PB24			56
-+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
-+#define PIN_PB24__QSPI1_IO1		PINMUX_PIN(PIN_PB24, 1, 1)
-+#define PIN_PB24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB24, 2, 1)
-+#define PIN_PB24__I2SMCC0_WS		PINMUX_PIN(PIN_PB24, 3, 1)
-+#define PIN_PB24__PCK5			PINMUX_PIN(PIN_PB24, 6, 1)
-+#define PIN_PB25			57
-+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
-+#define PIN_PB25__QSPI1_IO0		PINMUX_PIN(PIN_PB25, 1, 1)
-+#define PIN_PB25__FLEXCOM7_IO2		PINMUX_PIN(PIN_PB25, 2, 1)
-+#define PIN_PB25__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PB25, 3, 1)
-+#define PIN_PB25__PCK6			PINMUX_PIN(PIN_PB25, 6, 1)
-+#define PIN_PB26			58
-+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
-+#define PIN_PB26__QSPI1_CS		PINMUX_PIN(PIN_PB26, 1, 1)
-+#define PIN_PB26__FLEXCOM7_IO3		PINMUX_PIN(PIN_PB26, 2, 1)
-+#define PIN_PB26__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PB26, 3, 1)
-+#define PIN_PB26__PWMEXTRG0		PINMUX_PIN(PIN_PB26, 5, 1)
-+#define PIN_PB26__PCK7			PINMUX_PIN(PIN_PB26, 6, 1)
-+#define PIN_PB27			59
-+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
-+#define PIN_PB27__QSPI1_SCK		PINMUX_PIN(PIN_PB27, 1, 1)
-+#define PIN_PB27__FLEXCOM7_IO4		PINMUX_PIN(PIN_PB27, 2, 1)
-+#define PIN_PB27__I2SMCC0_MCK		PINMUX_PIN(PIN_PB27, 3, 1)
-+#define PIN_PB27__PWMEXTRG1		PINMUX_PIN(PIN_PB27, 5, 1)
-+#define PIN_PB28			60
-+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
-+#define PIN_PB28__SDMMC1_RSTN		PINMUX_PIN(PIN_PB28, 1, 1)
-+#define PIN_PB28__ADTRG			PINMUX_PIN(PIN_PB28, 2, 2)
-+#define PIN_PB28__PWMFI0		PINMUX_PIN(PIN_PB28, 5, 1)
-+#define PIN_PB28__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB28, 6, 4)
-+#define PIN_PB29			61
-+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
-+#define PIN_PB29__SDMMC1_CMD		PINMUX_PIN(PIN_PB29, 1, 1)
-+#define PIN_PB29__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB29, 2, 2)
-+#define PIN_PB29__FLEXCOM0_IO5		PINMUX_PIN(PIN_PB29, 3, 2)
-+#define PIN_PB29__TIOA3			PINMUX_PIN(PIN_PB29, 4, 2)
-+#define PIN_PB29__PWMFI1		PINMUX_PIN(PIN_PB29, 5, 1)
-+#define PIN_PB29__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB29, 6, 4)
-+#define PIN_PB30			62
-+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
-+#define PIN_PB30__SDMMC1_CK		PINMUX_PIN(PIN_PB30, 1, 1)
-+#define PIN_PB30__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB30, 2, 2)
-+#define PIN_PB30__FLEXCOM0_IO6		PINMUX_PIN(PIN_PB30, 3, 2)
-+#define PIN_PB30__TIOB3			PINMUX_PIN(PIN_PB30, 4, 1)
-+#define PIN_PB30__PWMH0			PINMUX_PIN(PIN_PB30, 5, 1)
-+#define PIN_PB30__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB30, 6, 4)
-+#define PIN_PB31			63
-+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
-+#define PIN_PB31__SDMMC1_DAT0		PINMUX_PIN(PIN_PB31, 1, 1)
-+#define PIN_PB31__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB31, 2, 2)
-+#define PIN_PB31__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB31, 3, 2)
-+#define PIN_PB31__TCLK3			PINMUX_PIN(PIN_PB31, 4, 1)
-+#define PIN_PB31__PWML0			PINMUX_PIN(PIN_PB31, 5, 1)
-+#define PIN_PB31__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB31, 6, 4)
-+#define PIN_PC0				64
-+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
-+#define PIN_PC0__SDMMC1_DAT1		PINMUX_PIN(PIN_PC0, 1, 1)
-+#define PIN_PC0__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC0, 2, 2)
-+#define PIN_PC0__TIOA4			PINMUX_PIN(PIN_PC0, 4, 1)
-+#define PIN_PC0__PWML1			PINMUX_PIN(PIN_PC0, 5, 1)
-+#define PIN_PC0__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC0, 6, 4)
-+#define PIN_PC1				65
-+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
-+#define PIN_PC1__SDMMC1_DAT2		PINMUX_PIN(PIN_PC1, 1, 1)
-+#define PIN_PC1__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC1, 2, 2)
-+#define PIN_PC1__TIOB4			PINMUX_PIN(PIN_PC1, 4, 1)
-+#define PIN_PC1__PWMH1			PINMUX_PIN(PIN_PC1, 5, 1)
-+#define PIN_PC1__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC1, 6, 4)
-+#define PIN_PC2				66
-+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
-+#define PIN_PC2__SDMMC1_DAT3		PINMUX_PIN(PIN_PC2, 1, 1)
-+#define PIN_PC2__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC2, 2, 2)
-+#define PIN_PC2__TCLK4			PINMUX_PIN(PIN_PC2, 4, 1)
-+#define PIN_PC2__PWML2			PINMUX_PIN(PIN_PC2, 5, 1)
-+#define PIN_PC2__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC2, 6, 4)
-+#define PIN_PC3				67
-+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
-+#define PIN_PC3__SDMMC1_WP		PINMUX_PIN(PIN_PC3, 1, 1)
-+#define PIN_PC3__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC3, 2, 2)
-+#define PIN_PC3__TIOA5			PINMUX_PIN(PIN_PC3, 4, 1)
-+#define PIN_PC3__PWMH2			PINMUX_PIN(PIN_PC3, 5, 1)
-+#define PIN_PC3__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC3, 6, 4)
-+#define PIN_PC4				68
-+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
-+#define PIN_PC4__SDMMC1_CD		PINMUX_PIN(PIN_PC4, 1, 1)
-+#define PIN_PC4__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC4, 2, 2)
-+#define PIN_PC4__FLEXCOM9_IO6		PINMUX_PIN(PIN_PC4, 3, 2)
-+#define PIN_PC4__TIOB5			PINMUX_PIN(PIN_PC4, 4, 1)
-+#define PIN_PC4__PWML3			PINMUX_PIN(PIN_PC4, 5, 1)
-+#define PIN_PC4__FLEXCOM11_IO0		PINMUX_PIN(PIN_PC4, 6, 4)
-+#define PIN_PC5				69
-+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
-+#define PIN_PC5__SDMMC1_1V8SEL		PINMUX_PIN(PIN_PC5, 1, 1)
-+#define PIN_PC5__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC5, 2, 2)
-+#define PIN_PC5__FLEXCOM6_IO5		PINMUX_PIN(PIN_PC5, 3, 2)
-+#define PIN_PC5__TCLK5			PINMUX_PIN(PIN_PC5, 4, 1)
-+#define PIN_PC5__PWMH3			PINMUX_PIN(PIN_PC5, 5, 1)
-+#define PIN_PC5__FLEXCOM11_IO1		PINMUX_PIN(PIN_PC5, 6, 4)
-+#define PIN_PC6				70
-+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
-+#define PIN_PC6__FLEXCOM4_IO4		PINMUX_PIN(PIN_PC6, 2, 2)
-+#define PIN_PC6__FLEXCOM6_IO6		PINMUX_PIN(PIN_PC6, 3, 2)
-+#define PIN_PC7				71
-+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
-+#define PIN_PC7__I2SMCC0_DIN0		PINMUX_PIN(PIN_PC7, 1, 1)
-+#define PIN_PC7__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC7, 2, 2)
-+#define PIN_PC8				72
-+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
-+#define PIN_PC8__I2SMCC0_DIN1		PINMUX_PIN(PIN_PC8, 1, 1)
-+#define PIN_PC8__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC8, 2, 2)
-+#define PIN_PC9				73
-+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
-+#define PIN_PC9__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PC9, 1, 1)
-+#define PIN_PC9__FLEXCOM7_IO2		PINMUX_PIN(PIN_PC9, 2, 2)
-+#define PIN_PC9__FLEXCOM1_IO0		PINMUX_PIN(PIN_PC9, 6, 4)
-+#define PIN_PC10			74
-+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
-+#define PIN_PC10__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PC10, 1, 1)
-+#define PIN_PC10__FLEXCOM7_IO3		PINMUX_PIN(PIN_PC10, 2, 2)
-+#define PIN_PC10__FLEXCOM1_IO1		PINMUX_PIN(PIN_PC10, 6, 4)
-+#define PIN_PC11			75
-+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
-+#define PIN_PC11__I2SMCC1_CK		PINMUX_PIN(PIN_PC11, 1, 1)
-+#define PIN_PC11__FLEXCOM7_IO4		PINMUX_PIN(PIN_PC11, 2, 2)
-+#define PIN_PC11__FLEXCOM2_IO0		PINMUX_PIN(PIN_PC11, 6, 4)
-+#define PIN_PC12			76
-+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
-+#define PIN_PC12__I2SMCC1_WS		PINMUX_PIN(PIN_PC12, 1, 1)
-+#define PIN_PC12__FLEXCOM8_IO2		PINMUX_PIN(PIN_PC12, 2, 2)
-+#define PIN_PC12__FLEXCOM2_IO1		PINMUX_PIN(PIN_PC12, 6, 4)
-+#define PIN_PC13			77
-+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
-+#define PIN_PC13__I2SMCC1_MCK		PINMUX_PIN(PIN_PC13, 1, 1)
-+#define PIN_PC13__FLEXCOM8_IO1		PINMUX_PIN(PIN_PC13, 2, 2)
-+#define PIN_PC13__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC13, 6, 4)
-+#define PIN_PC14			78
-+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
-+#define PIN_PC14__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PC14, 1, 1)
-+#define PIN_PC14__FLEXCOM8_IO0		PINMUX_PIN(PIN_PC14, 2, 2)
-+#define PIN_PC14__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC14, 6, 4)
-+#define PIN_PC15			79
-+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
-+#define PIN_PC15__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PC15, 1, 1)
-+#define PIN_PC15__FLEXCOM8_IO3		PINMUX_PIN(PIN_PC15, 2, 2)
-+#define PIN_PC15__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC15, 6, 4)
-+#define PIN_PC16			80
-+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
-+#define PIN_PC16__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PC16, 1, 1)
-+#define PIN_PC16__FLEXCOM8_IO4		PINMUX_PIN(PIN_PC16, 2, 2)
-+#define PIN_PC16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC16, 6, 4)
-+#define PIN_PC17			81
-+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
-+#define PIN_PC17__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PC17, 1, 1)
-+#define PIN_PC17__EXT_IRQ0		PINMUX_PIN(PIN_PC17, 2, 3)
-+#define PIN_PC17__FLEXCOM5_IO0		PINMUX_PIN(PIN_PC17, 6, 4)
-+#define PIN_PC18			82
-+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
-+#define PIN_PC18__I2SMCC1_DIN0		PINMUX_PIN(PIN_PC18, 1, 1)
-+#define PIN_PC18__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC18, 2, 2)
-+#define PIN_PC18__FLEXCOM5_IO1		PINMUX_PIN(PIN_PC18, 6, 4)
-+#define PIN_PC19			83
-+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
-+#define PIN_PC19__I2SMCC1_DIN1		PINMUX_PIN(PIN_PC19, 1, 1)
-+#define PIN_PC19__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC19, 2, 2)
-+#define PIN_PC19__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC19, 6, 4)
-+#define PIN_PC20			84
-+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
-+#define PIN_PC20__I2SMCC1_DIN2		PINMUX_PIN(PIN_PC20, 1, 1)
-+#define PIN_PC20__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC20, 2, 2)
-+#define PIN_PC20__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC20, 6, 4)
-+#define PIN_PC21			85
-+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
-+#define PIN_PC21__I2SMCC1_DIN3		PINMUX_PIN(PIN_PC21, 1, 1)
-+#define PIN_PC21__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC21, 2, 2)
-+#define PIN_PC21__D3			PINMUX_PIN(PIN_PC21, 4, 2)
-+#define PIN_PC21__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC21, 6, 5)
-+#define PIN_PC22			86
-+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
-+#define PIN_PC22__I2SMCC0_DIN2		PINMUX_PIN(PIN_PC22, 1, 1)
-+#define PIN_PC22__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC22, 2, 2)
-+#define PIN_PC22__D4			PINMUX_PIN(PIN_PC22, 4, 2)
-+#define PIN_PC22__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC22, 6, 5)
-+#define PIN_PC23			87
-+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
-+#define PIN_PC23__I2SMCC0_DIN3		PINMUX_PIN(PIN_PC23, 1, 1)
-+#define PIN_PC23__FLEXCOM0_IO5		PINMUX_PIN(PIN_PC23, 2, 3)
-+#define PIN_PC23__D5			PINMUX_PIN(PIN_PC23, 4, 2)
-+#define PIN_PC23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC23, 6, 5)
-+#define PIN_PC24			88
-+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
-+#define PIN_PC24__FLEXCOM0_IO6		PINMUX_PIN(PIN_PC24, 2, 3)
-+#define PIN_PC24__EXT_IRQ1		PINMUX_PIN(PIN_PC24, 3, 3)
-+#define PIN_PC24__D6			PINMUX_PIN(PIN_PC24, 4, 2)
-+#define PIN_PC24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC24, 6, 5)
-+#define PIN_PC25			89
-+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
-+#define PIN_PC25__NTRST			PINMUX_PIN(PIN_PC25, 1, 1)
-+#define PIN_PC26			90
-+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
-+#define PIN_PC26__TCK_SWCLK		PINMUX_PIN(PIN_PC26, 1, 1)
-+#define PIN_PC27			91
-+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
-+#define PIN_PC27__TMS_SWDIO		PINMUX_PIN(PIN_PC27, 1, 1)
-+#define PIN_PC28			92
-+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
-+#define PIN_PC28__TDI			PINMUX_PIN(PIN_PC28, 1, 1)
-+#define PIN_PC29			93
-+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
-+#define PIN_PC29__TDO			PINMUX_PIN(PIN_PC29, 1, 1)
-+#define PIN_PC30			94
-+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
-+#define PIN_PC30__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC30, 2, 2)
-+#define PIN_PC31			95
-+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
-+#define PIN_PC31__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC31, 2, 2)
-+#define PIN_PD0				96
-+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
-+#define PIN_PD0__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD0, 2, 2)
-+#define PIN_PD1				97
-+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
-+#define PIN_PD1__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD1, 2, 2)
-+#define PIN_PD2				98
-+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
-+#define PIN_PD2__SDMMC2_RSTN		PINMUX_PIN(PIN_PD2, 1, 1)
-+#define PIN_PD2__PCK0			PINMUX_PIN(PIN_PD2, 2, 2)
-+#define PIN_PD2__CANTX4			PINMUX_PIN(PIN_PD2, 3, 1)
-+#define PIN_PD2__D7			PINMUX_PIN(PIN_PD2, 4, 2)
-+#define PIN_PD2__TIOA0			PINMUX_PIN(PIN_PD2, 5, 2)
-+#define PIN_PD2__FLEXCOM8_IO0		PINMUX_PIN(PIN_PD2, 6, 5)
-+#define PIN_PD3				99
-+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
-+#define PIN_PD3__SDMMC2_CMD		PINMUX_PIN(PIN_PD3, 1, 1)
-+#define PIN_PD3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD3, 2, 2)
-+#define PIN_PD3__CANRX4			PINMUX_PIN(PIN_PD3, 3, 1)
-+#define PIN_PD3__NANDRDY		PINMUX_PIN(PIN_PD3, 4, 2)
-+#define PIN_PD3__TIOB0			PINMUX_PIN(PIN_PD3, 5, 2)
-+#define PIN_PD3__FLEXCOM8_IO1		PINMUX_PIN(PIN_PD3, 6, 5)
-+#define PIN_PD4				100
-+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
-+#define PIN_PD4__SDMMC2_CK		PINMUX_PIN(PIN_PD4, 1, 1)
-+#define PIN_PD4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD4, 2, 2)
-+#define PIN_PD4__CANTX5			PINMUX_PIN(PIN_PD4, 3, 1)
-+#define PIN_PD4__NCS3_NANDCS		PINMUX_PIN(PIN_PD4, 4, 2)
-+#define PIN_PD4__TCLK0			PINMUX_PIN(PIN_PD4, 5, 2)
-+#define PIN_PD4__FLEXCOM9_IO0		PINMUX_PIN(PIN_PD4, 6, 5)
-+#define PIN_PD5				101
-+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
-+#define PIN_PD5__SDMMC2_DAT0		PINMUX_PIN(PIN_PD5, 1, 1)
-+#define PIN_PD5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PD5, 2, 2)
-+#define PIN_PD5__CANRX5			PINMUX_PIN(PIN_PD5, 3, 1)
-+#define PIN_PD5__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PD5, 4, 2)
-+#define PIN_PD5__TIOA1			PINMUX_PIN(PIN_PD5, 5, 2)
-+#define PIN_PD5__FLEXCOM9_IO1		PINMUX_PIN(PIN_PD5, 6, 5)
-+#define PIN_PD6				102
-+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
-+#define PIN_PD6__SDMMC2_DAT1		PINMUX_PIN(PIN_PD6, 1, 1)
-+#define PIN_PD6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PD6, 2, 2)
-+#define PIN_PD6__SPDIF_RX		PINMUX_PIN(PIN_PD6, 3, 3)
-+#define PIN_PD6__NRD_NANDOE		PINMUX_PIN(PIN_PD6, 4, 2)
-+#define PIN_PD6__TIOB1			PINMUX_PIN(PIN_PD6, 5, 2)
-+#define PIN_PD6__FLEXCOM10_IO0		PINMUX_PIN(PIN_PD6, 6, 5)
-+#define PIN_PD7				103
-+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
-+#define PIN_PD7__SDMMC2_DAT2		PINMUX_PIN(PIN_PD7, 1, 1)
-+#define PIN_PD7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PD7, 2, 2)
-+#define PIN_PD7__SPDIF_TX		PINMUX_PIN(PIN_PD7, 2, 2)
-+#define PIN_PD7__A21_NANDALE		PINMUX_PIN(PIN_PD7, 4, 2)
-+#define PIN_PD7__TCLK1			PINMUX_PIN(PIN_PD7, 5, 2)
-+#define PIN_PD7__FLEXCOM10_IO1		PINMUX_PIN(PIN_PD7, 6, 5)
-+#define PIN_PD8				104
-+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
-+#define PIN_PD8__SDMMC2_DAT3		PINMUX_PIN(PIN_PD8, 1, 1)
-+#define PIN_PD8__I2SMCC0_DIN0		PINMUX_PIN(PIN_PD8, 3, 1)
-+#define PIN_PD8__A11_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
-+#define PIN_PD8__TIOA2			PINMUX_PIN(PIN_PD8, 5, 2)
-+#define PIN_PD8__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD8, 6, 5)
-+#define PIN_PD9				105
-+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
-+#define PIN_PD9__SDMMC2_WP		PINMUX_PIN(PIN_PD9, 1, 1)
-+#define PIN_PD9__I2SMCC0_DIN1		PINMUX_PIN(PIN_PD9, 3, 2)
-+#define PIN_PD9__D0			PINMUX_PIN(PIN_PD9, 4, 2)
-+#define PIN_PD9__TIOB2			PINMUX_PIN(PIN_PD9, 5, 2)
-+#define PIN_PD9__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD9, 6, 5)
-+#define PIN_PD10			106
-+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
-+#define PIN_PD10__SDMMC2_CD		PINMUX_PIN(PIN_PD10, 1, 1)
-+#define PIN_PD10__PCK6			PINMUX_PIN(PIN_PD10, 2, 2)
-+#define PIN_PD10__I2SMCC0_DIN2		PINMUX_PIN(PIN_PD10, 3, 2)
-+#define PIN_PD10__D1			PINMUX_PIN(PIN_PD10, 4, 2)
-+#define PIN_PD10__TCLK2			PINMUX_PIN(PIN_PD10, 5, 2)
-+#define PIN_PD10__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD10, 6, 3)
-+#define PIN_PD11			107
-+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
-+#define PIN_PD11__SDMMC2_1V8SEL		PINMUX_PIN(PIN_PD11, 1, 1)
-+#define PIN_PD11__PCK7			PINMUX_PIN(PIN_PD11, 2, 2)
-+#define PIN_PD11__I2SMCC0_DIN3		PINMUX_PIN(PIN_PD11, 3, 2)
-+#define PIN_PD11__D2			PINMUX_PIN(PIN_PD11, 4, 2)
-+#define PIN_PD11__TIOA3			PINMUX_PIN(PIN_PD11, 5, 2)
-+#define PIN_PD11__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD11, 6, 3)
-+#define PIN_PD12			108
-+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
-+#define PIN_PD12__PCK1			PINMUX_PIN(PIN_PD12, 1, 2)
-+#define PIN_PD12__FLEXCOM1_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
-+#define PIN_PD12__CANTX0		PINMUX_PIN(PIN_PD12, 4, 2)
-+#define PIN_PD12__TIOB3			PINMUX_PIN(PIN_PD12, 5, 2)
-+#define PIN_PD13			109
-+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
-+#define PIN_PD13__I2SMCC0_CK		PINMUX_PIN(PIN_PD13, 1, 2)
-+#define PIN_PD13__FLEXCOM1_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
-+#define PIN_PD13__PWML0			PINMUX_PIN(PIN_PD13, 3, 4)
-+#define PIN_PD13__CANRX0		PINMUX_PIN(PIN_PD13, 4, 2)
-+#define PIN_PD13__TCLK3			PINMUX_PIN(PIN_PD13, 5, 2)
-+#define PIN_PD14			110
-+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
-+#define PIN_PD14__I2SMCC0_MCK		PINMUX_PIN(PIN_PD14, 1, 2)
-+#define PIN_PD14__FLEXCOM1_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
-+#define PIN_PD14__PWMH0			PINMUX_PIN(PIN_PD14, 3, 4)
-+#define PIN_PD14__CANTX1		PINMUX_PIN(PIN_PD14, 4, 2)
-+#define PIN_PD14__TIOA4			PINMUX_PIN(PIN_PD14, 5, 2)
-+#define PIN_PD14__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD14, 6, 5)
-+#define PIN_PD15			111
-+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
-+#define PIN_PD15__I2SMCC0_WS		PINMUX_PIN(PIN_PD15, 1, 2)
-+#define PIN_PD15__FLEXCOM1_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
-+#define PIN_PD15__PWML1			PINMUX_PIN(PIN_PD15, 3, 4)
-+#define PIN_PD15__CANRX1		PINMUX_PIN(PIN_PD15, 4, 2)
-+#define PIN_PD15__TIOB4			PINMUX_PIN(PIN_PD15, 5, 2)
-+#define PIN_PD15__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD15, 6, 5)
-+#define PIN_PD16			112
-+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
-+#define PIN_PD16__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PD16, 1, 2)
-+#define PIN_PD16__FLEXCOM1_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
-+#define PIN_PD16__PWMH1			PINMUX_PIN(PIN_PD16, 3, 4)
-+#define PIN_PD16__CANTX2		PINMUX_PIN(PIN_PD16, 4, 2)
-+#define PIN_PD16__TCLK4			PINMUX_PIN(PIN_PD16, 5, 2)
-+#define PIN_PD16__FLEXCOM3_IO0		PINMUX_PIN(PIN_PD16, 6, 5)
-+#define PIN_PD17			113
-+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
-+#define PIN_PD17__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PD17, 1, 2)
-+#define PIN_PD17__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD17, 2, 2)
-+#define PIN_PD17__PWML2			PINMUX_PIN(PIN_PD17, 3, 4)
-+#define PIN_PD17__CANRX2		PINMUX_PIN(PIN_PD17, 4, 2)
-+#define PIN_PD17__TIOA5			PINMUX_PIN(PIN_PD17, 5, 2)
-+#define PIN_PD17__FLEXCOM3_IO1		PINMUX_PIN(PIN_PD17, 6, 5)
-+#define PIN_PD18			114
-+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
-+#define PIN_PD18__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PD18, 1, 2)
-+#define PIN_PD18__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD18, 2, 2)
-+#define PIN_PD18__PWMH2			PINMUX_PIN(PIN_PD18, 3, 4)
-+#define PIN_PD18__CANTX3		PINMUX_PIN(PIN_PD18, 4, 2)
-+#define PIN_PD18__TIOB5			PINMUX_PIN(PIN_PD18, 5, 2)
-+#define PIN_PD18__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD18, 6, 5)
-+#define PIN_PD19			115
-+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
-+#define PIN_PD19__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PD19, 1, 2)
-+#define PIN_PD19__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD19, 2, 2)
-+#define PIN_PD19__PWML3			PINMUX_PIN(PIN_PD19, 3, 4)
-+#define PIN_PD19__CANRX3		PINMUX_PIN(PIN_PD19, 4, 2)
-+#define PIN_PD19__TCLK5			PINMUX_PIN(PIN_PD19, 5, 2)
-+#define PIN_PD19__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD19, 6, 5)
-+#define PIN_PD20			116
-+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
-+#define PIN_PD20__PCK0			PINMUX_PIN(PIN_PD20, 1, 3)
-+#define PIN_PD20__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD20, 2, 2)
-+#define PIN_PD20__PWMH3			PINMUX_PIN(PIN_PD20, 3, 4)
-+#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 5, 2)
-+#define PIN_PD20__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD20, 6, 5)
-+#define PIN_PD21			117
-+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
-+#define PIN_PD21__PCK1			PINMUX_PIN(PIN_PD21, 1, 3)
-+#define PIN_PD21__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD21, 2, 2)
-+#define PIN_PD21__CANRX4		PINMUX_PIN(PIN_PD21, 4, 2)
-+#define PIN_PD21__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD21, 6, 5)
-+#define PIN_PD21__G1_TXEN		PINMUX_PIN(PIN_PD21, 7, 1)
-+#define PIN_PD22			118
-+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
-+#define PIN_PD22__PDMC0_CLK		PINMUX_PIN(PIN_PD22, 1, 2)
-+#define PIN_PD22__PWMEXTRG0		PINMUX_PIN(PIN_PD22, 3, 4)
-+#define PIN_PD22__RD1			PINMUX_PIN(PIN_PD22, 4, 2)
-+#define PIN_PD22__CANTX5		PINMUX_PIN(PIN_PD22, 6, 2)
-+#define PIN_PD22__G1_TX0		PINMUX_PIN(PIN_PD22, 7, 1)
-+#define PIN_PD23			119
-+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
-+#define PIN_PD23__PDMC0_DS0		PINMUX_PIN(PIN_PD23, 1, 2)
-+#define PIN_PD23__PWMEXTRG1		PINMUX_PIN(PIN_PD23, 3, 4)
-+#define PIN_PD23__RF1			PINMUX_PIN(PIN_PD23, 4, 2)
-+#define PIN_PD23__ISC_MCK		PINMUX_PIN(PIN_PD23, 5, 2)
-+#define PIN_PD23__CANRX5		PINMUX_PIN(PIN_PD23, 6, 2)
-+#define PIN_PD23__G1_TX1		PINMUX_PIN(PIN_PD23, 7, 1)
-+#define PIN_PD24			120
-+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
-+#define PIN_PD24__PDMC0_DS1		PINMUX_PIN(PIN_PD24, 1, 2)
-+#define PIN_PD24__PWMFI0		PINMUX_PIN(PIN_PD24, 3, 4)
-+#define PIN_PD24__RK1			PINMUX_PIN(PIN_PD24, 4, 2)
-+#define PIN_PD24__ISC_D0		PINMUX_PIN(PIN_PD24, 5, 2)
-+#define PIN_PD24__G1_RXDV		PINMUX_PIN(PIN_PD24, 7, 1)
-+#define PIN_PD25			121
-+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
-+#define PIN_PD25__PDMC1_CLK		PINMUX_PIN(PIN_PD25, 1, 2)
-+#define PIN_PD25__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD25, 2, 2)
-+#define PIN_PD25__PWMFI1		PINMUX_PIN(PIN_PD25, 3, 4)
-+#define PIN_PD25__TD1			PINMUX_PIN(PIN_PD25, 4, 2)
-+#define PIN_PD25__ISC_D1		PINMUX_PIN(PIN_PD25, 5, 2)
-+#define PIN_PD25__G1_RX0		PINMUX_PIN(PIN_PD25, 7, 1)
-+#define PIN_PD26			122
-+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
-+#define PIN_PD26__PDMC1_DS0		PINMUX_PIN(PIN_PD26, 1, 2)
-+#define PIN_PD26__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD26, 2, 2)
-+#define PIN_PD26__ADTRG			PINMUX_PIN(PIN_PD26, 3, 3)
-+#define PIN_PD26__TF1			PINMUX_PIN(PIN_PD26, 4, 2)
-+#define PIN_PD26__ISC_D2		PINMUX_PIN(PIN_PD26, 5, 2)
-+#define PIN_PD26__G1_RX1		PINMUX_PIN(PIN_PD26, 7, 1)
-+#define PIN_PD27			123
-+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
-+#define PIN_PD27__PDMC1_DS1		PINMUX_PIN(PIN_PD27, 1, 2)
-+#define PIN_PD27__FLEXCOM5_IO2		PINMUX_PIN(PIN_PD27, 2, 2)
-+#define PIN_PD27__TIOA0			PINMUX_PIN(PIN_PD27, 3, 3)
-+#define PIN_PD27__TK1			PINMUX_PIN(PIN_PD27, 4, 2)
-+#define PIN_PD27__ISC_D3		PINMUX_PIN(PIN_PD27, 5, 2)
-+#define PIN_PD27__G1_RXER		PINMUX_PIN(PIN_PD27, 7, 1)
-+#define PIN_PD28			124
-+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
-+#define PIN_PD28__RD0			PINMUX_PIN(PIN_PD28, 1, 2)
-+#define PIN_PD28__FLEXCOM5_IO3		PINMUX_PIN(PIN_PD28, 2, 2)
-+#define PIN_PD28__TIOB0			PINMUX_PIN(PIN_PD28, 3, 3)
-+#define PIN_PD28__I2SMCC1_CK		PINMUX_PIN(PIN_PD28, 4, 2)
-+#define PIN_PD28__ISC_D4		PINMUX_PIN(PIN_PD28, 5, 2)
-+#define PIN_PD28__PWML3			PINMUX_PIN(PIN_PD28, 6, 5)
-+#define PIN_PD28__G1_MDC		PINMUX_PIN(PIN_PD28, 7, 1)
-+#define PIN_PD29			125
-+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
-+#define PIN_PD29__RF0			PINMUX_PIN(PIN_PD29, 1, 2)
-+#define PIN_PD29__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD29, 2, 2)
-+#define PIN_PD29__TCLK0			PINMUX_PIN(PIN_PD29, 3, 3)
-+#define PIN_PD29__I2SMCC1_WS		PINMUX_PIN(PIN_PD29, 4, 2)
-+#define PIN_PD29__ISC_D5		PINMUX_PIN(PIN_PD29, 5, 2)
-+#define PIN_PD29__PWMH3			PINMUX_PIN(PIN_PD29, 6, 5)
-+#define PIN_PD29__G1_MDIO		PINMUX_PIN(PIN_PD29, 7, 1)
-+#define PIN_PD30			126
-+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
-+#define PIN_PD30__RK0			PINMUX_PIN(PIN_PD30, 1, 2)
-+#define PIN_PD30__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD30, 2, 2)
-+#define PIN_PD30__TIOA1			PINMUX_PIN(PIN_PD30, 3, 3)
-+#define PIN_PD30__I2SMCC1_MCK		PINMUX_PIN(PIN_PD30, 4, 2)
-+#define PIN_PD30__ISC_D6		PINMUX_PIN(PIN_PD30, 5, 2)
-+#define PIN_PD30__PWMEXTRG0		PINMUX_PIN(PIN_PD30, 6, 5)
-+#define PIN_PD30__G1_TXCK		PINMUX_PIN(PIN_PD30, 7, 1)
-+#define PIN_PD31			127
-+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
-+#define PIN_PD31__TD0			PINMUX_PIN(PIN_PD31, 1, 2)
-+#define PIN_PD31__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD31, 2, 2)
-+#define PIN_PD31__TIOB1			PINMUX_PIN(PIN_PD31, 3, 3)
-+#define PIN_PD31__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PD31, 4, 2)
-+#define PIN_PD31__ISC_D7		PINMUX_PIN(PIN_PD31, 5, 2)
-+#define PIN_PD31__PWM_EXTRG1		PINMUX_PIN(PIN_PD31, 6, 5)
-+#define PIN_PD31__G1_TX2		PINMUX_PIN(PIN_PD31, 7, 1)
-+#define PIN_PE0				128
-+#define PIN_PE0__GPIO			PINMUX_PIN(PIN_PE0, 0, 0)
-+#define PIN_PE0__TF0			PINMUX_PIN(PIN_PE0, 1, 2)
-+#define PIN_PE0__FLEXCOM6_IO2		PINMUX_PIN(PIN_PE0, 2, 2)
-+#define PIN_PE0__TCLK1			PINMUX_PIN(PIN_PE0, 3, 3)
-+#define PIN_PE0__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PE0, 4, 2)
-+#define PIN_PE0__ISC_HSYNC		PINMUX_PIN(PIN_PE0, 5, 2)
-+#define PIN_PE0__PWMFI0			PINMUX_PIN(PIN_PE0, 6, 5)
-+#define PIN_PE0__G1_TX3			PINMUX_PIN(PIN_PE0, 7, 1)
-+#define PIN_PE1				129
-+#define PIN_PE1__GPIO			PINMUX_PIN(PIN_PE1, 0, 0)
-+#define PIN_PE1__TK0			PINMUX_PIN(PIN_PE1, 1, 2)
-+#define PIN_PE1__FLEXCOM6_IO3		PINMUX_PIN(PIN_PE1, 2, 2)
-+#define PIN_PE1__TIOA2			PINMUX_PIN(PIN_PE1, 3, 3)
-+#define PIN_PE1__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PE1, 4, 2)
-+#define PIN_PE1__ISC_VSYNC		PINMUX_PIN(PIN_PE1, 5, 2)
-+#define PIN_PE1__PWMFI1			PINMUX_PIN(PIN_PE1, 6, 5)
-+#define PIN_PE1__G1_RX2			PINMUX_PIN(PIN_PE1, 7, 1)
-+#define PIN_PE2				130
-+#define PIN_PE2__GPIO			PINMUX_PIN(PIN_PE2, 0, 0)
-+#define PIN_PE2__PWML0			PINMUX_PIN(PIN_PE2, 1, 5)
-+#define PIN_PE2__FLEXCOM6_IO4		PINMUX_PIN(PIN_PE2, 2, 2)
-+#define PIN_PE2__TIOB2			PINMUX_PIN(PIN_PE2, 3, 3)
-+#define PIN_PE2__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PE2, 4, 2)
-+#define PIN_PE2__ISC_FIELD		PINMUX_PIN(PIN_PE2, 5, 2)
-+#define PIN_PE2__G1_RX3			PINMUX_PIN(PIN_PE2, 7, 1)
-+#define PIN_PE3				131
-+#define PIN_PE3__GPIO			PINMUX_PIN(PIN_PE3, 0, 0)
-+#define PIN_PE3__PWMH0			PINMUX_PIN(PIN_PE3, 1, 5)
-+#define PIN_PE3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PE3, 2, 4)
-+#define PIN_PE3__TCLK2			PINMUX_PIN(PIN_PE3, 3, 3)
-+#define PIN_PE3__I2SMCC1_DIN0		PINMUX_PIN(PIN_PE3, 4, 2)
-+#define PIN_PE3__ISC_PCK		PINMUX_PIN(PIN_PE3, 5, 2)
-+#define PIN_PE3__G1_RXCK		PINMUX_PIN(PIN_PE3, 7, 1)
-+#define PIN_PE4				132
-+#define PIN_PE4__GPIO			PINMUX_PIN(PIN_PE4, 0, 0)
-+#define PIN_PE4__PWML1			PINMUX_PIN(PIN_PE4, 1, 5)
-+#define PIN_PE4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PE4, 2, 4)
-+#define PIN_PE4__TIOA3			PINMUX_PIN(PIN_PE4, 3, 3)
-+#define PIN_PE4__I2SMCC1_DIN1		PINMUX_PIN(PIN_PE4, 4, 2)
-+#define PIN_PE4__ISC_D8			PINMUX_PIN(PIN_PE4, 5, 2)
-+#define PIN_PE4__G1_TXER		PINMUX_PIN(PIN_PE4, 7, 1)
-+#define PIN_PE5				133
-+#define PIN_PE5__GPIO			PINMUX_PIN(PIN_PE5, 0, 0)
-+#define PIN_PE5__PWMH1			PINMUX_PIN(PIN_PE5, 1, 5)
-+#define PIN_PE5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PE5, 2, 4)
-+#define PIN_PE5__TIOB3			PINMUX_PIN(PIN_PE5, 3, 3)
-+#define PIN_PE5__I2SMCC1_DIN2		PINMUX_PIN(PIN_PE5, 4, 2)
-+#define PIN_PE5__ISC_D9			PINMUX_PIN(PIN_PE5, 5, 2)
-+#define PIN_PE5__G1_COL			PINMUX_PIN(PIN_PE5, 7, 1)
-+#define PIN_PE6				134
-+#define PIN_PE6__GPIO			PINMUX_PIN(PIN_PE6, 0, 0)
-+#define PIN_PE6__PWML2			PINMUX_PIN(PIN_PE6, 1, 5)
-+#define PIN_PE6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PE6, 2, 4)
-+#define PIN_PE6__TCLK3			PINMUX_PIN(PIN_PE6, 3, 3)
-+#define PIN_PE6__I2SMCC1_DIN3		PINMUX_PIN(PIN_PE6, 4, 2)
-+#define PIN_PE6__ISC_D10		PINMUX_PIN(PIN_PE6, 5, 2)
-+#define PIN_PE6__G1_CRS			PINMUX_PIN(PIN_PE6, 7, 1)
-+#define PIN_PE7				135
-+#define PIN_PE7__GPIO			PINMUX_PIN(PIN_PE7, 0, 0)
-+#define PIN_PE7__PWMH2			PINMUX_PIN(PIN_PE7, 1, 5)
-+#define PIN_PE7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PE7, 2, 4)
-+#define PIN_PE7__TIOA4			PINMUX_PIN(PIN_PE7, 3, 3)
-+#define PIN_PE7__ISC_D11		PINMUX_PIN(PIN_PE7, 5, 2)
-+#define PIN_PE7__G1_TSUCOMP		PINMUX_PIN(PIN_PE7, 7, 1)
---- /dev/null
-+++ b/arch/arm/boot/dts/sama7g5.dtsi
-@@ -0,0 +1,528 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ *  sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
-+ *
-+ *  Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
-+ *
-+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
-+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
-+ *
-+ */
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/clock/at91.h>
-+#include <dt-bindings/dma/at91.h>
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/ {
-+	model = "Microchip SAMA7G5 family SoC";
-+	compatible = "microchip,sama7g5";
-+	#address-cells = <1>;
-+	#size-cells = <1>;
-+	interrupt-parent = <&gic>;
-+
-+	cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		cpu0: cpu@0 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0x0>;
-+		};
-+	};
-+
-+	clocks {
-+		slow_xtal: slow_xtal {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+		};
-+
-+		main_xtal: main_xtal {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+		};
-+
-+		usb_clk: usb_clk {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <48000000>;
-+		};
-+	};
-+
-+	vddout25: fixed-regulator-vddout25 {
-+		compatible = "regulator-fixed";
-+
-+		regulator-name = "VDDOUT25";
-+		regulator-min-microvolt = <2500000>;
-+		regulator-max-microvolt = <2500000>;
-+		regulator-boot-on;
-+		status = "disabled";
-+	};
-+
-+	ns_sram: sram@100000 {
-+		compatible = "mmio-sram";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		reg = <0x100000 0x20000>;
-+		ranges;
-+	};
-+
-+	soc {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges;
-+
-+		secumod: secumod@e0004000 {
-+			compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
-+			reg = <0xe0004000 0x4000>;
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+		};
-+
-+		sfrbu: sfr@e0008000 {
-+			compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
-+			reg = <0xe0008000 0x20>;
-+		};
-+
-+		pioA: pinctrl@e0014000 {
-+			compatible = "microchip,sama7g5-pinctrl";
-+			reg = <0xe0014000 0x800>;
-+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-+				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-+				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-+				<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-+				<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
-+		};
-+
-+		pmc: pmc@e0018000 {
-+			compatible = "microchip,sama7g5-pmc", "syscon";
-+			reg = <0xe0018000 0x200>;
-+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-+			#clock-cells = <2>;
-+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
-+			clock-names = "td_slck", "md_slck", "main_xtal";
-+		};
-+
-+		rtt: rtt@e001d020 {
-+			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
-+			reg = <0xe001d020 0x30>;
-+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clk32k 0>;
-+		};
-+
-+		clk32k: clock-controller@e001d050 {
-+			compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
-+			reg = <0xe001d050 0x4>;
-+			clocks = <&slow_xtal>;
-+			#clock-cells = <1>;
-+		};
-+
-+		gpbr: gpbr@e001d060 {
-+			compatible = "microchip,sama7g5-gpbr", "syscon";
-+			reg = <0xe001d060 0x48>;
-+		};
-+
-+		ps_wdt: watchdog@e001d180 {
-+			compatible = "microchip,sama7g5-wdt";
-+			reg = <0xe001d180 0x24>;
-+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clk32k 0>;
-+		};
-+
-+		sdmmc0: mmc@e1204000 {
-+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
-+			reg = <0xe1204000 0x4000>;
-+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
-+			clock-names = "hclock", "multclk";
-+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
-+			assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
-+			assigned-clock-rates = <200000000>;
-+			microchip,sdcal-inverted;
-+			status = "disabled";
-+		};
-+
-+		sdmmc1: mmc@e1208000 {
-+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
-+			reg = <0xe1208000 0x4000>;
-+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
-+			clock-names = "hclock", "multclk";
-+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
-+			assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
-+			assigned-clock-rates = <200000000>;
-+			microchip,sdcal-inverted;
-+			status = "disabled";
-+		};
-+
-+		sdmmc2: mmc@e120c000 {
-+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
-+			reg = <0xe120c000 0x4000>;
-+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
-+			clock-names = "hclock", "multclk";
-+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
-+			assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
-+			assigned-clock-rates = <200000000>;
-+			microchip,sdcal-inverted;
-+			status = "disabled";
-+		};
-+
-+		pwm: pwm@e1604000 {
-+			compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
-+			reg = <0xe1604000 0x4000>;
-+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-+			#pwm-cells = <3>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
-+			status = "disabled";
-+		};
-+
-+		spdifrx: spdifrx@e1614000 {
-+			#sound-dai-cells = <0>;
-+			compatible = "microchip,sama7g5-spdifrx";
-+			reg = <0xe1614000 0x4000>;
-+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-+			dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
-+			dma-names = "rx";
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
-+			clock-names = "pclk", "gclk";
-+			status = "disabled";
-+		};
-+
-+		spdiftx: spdiftx@e1618000 {
-+			#sound-dai-cells = <0>;
-+			compatible = "microchip,sama7g5-spdiftx";
-+			reg = <0xe1618000 0x4000>;
-+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-+			dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
-+			dma-names = "tx";
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
-+			clock-names = "pclk", "gclk";
-+		};
-+
-+		i2s0: i2s@e161c000 {
-+			compatible = "microchip,sama7g5-i2smcc";
-+			#sound-dai-cells = <0>;
-+			reg = <0xe161c000 0x4000>;
-+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-+			dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
-+			dma-names = "tx", "rx";
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
-+			clock-names = "pclk", "gclk";
-+			status = "disabled";
-+		};
-+
-+		i2s1: i2s@e1620000 {
-+			compatible = "microchip,sama7g5-i2smcc";
-+			#sound-dai-cells = <0>;
-+			reg = <0xe1620000 0x4000>;
-+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-+			dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
-+			dma-names = "tx", "rx";
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
-+			clock-names = "pclk", "gclk";
-+			status = "disabled";
-+		};
-+
-+		pit64b0: timer@e1800000 {
-+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
-+			reg = <0xe1800000 0x4000>;
-+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
-+			clock-names = "pclk", "gclk";
-+		};
-+
-+		pit64b1: timer@e1804000 {
-+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
-+			reg = <0xe1804000 0x4000>;
-+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
-+			clock-names = "pclk", "gclk";
-+		};
-+
-+		flx0: flexcom@e1818000 {
-+			compatible = "atmel,sama5d2-flexcom";
-+			reg = <0xe1818000 0x200>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0x0 0xe1818000 0x800>;
-+			status = "disabled";
-+
-+			uart0: serial@200 {
-+				compatible = "atmel,at91sam9260-usart";
-+				reg = <0x200 0x200>;
-+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
-+				clock-names = "usart";
-+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
-+					<&dma1 AT91_XDMAC_DT_PERID(5)>;
-+				dma-names = "tx", "rx";
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "disabled";
-+			};
-+		};
-+
-+		flx1: flexcom@e181c000 {
-+			compatible = "atmel,sama5d2-flexcom";
-+			reg = <0xe181c000 0x200>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0x0 0xe181c000 0x800>;
-+			status = "disabled";
-+
-+			i2c1: i2c@600 {
-+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
-+				reg = <0x600 0x200>;
-+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
-+				atmel,fifo-size = <32>;
-+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
-+					<&dma0 AT91_XDMAC_DT_PERID(8)>;
-+				dma-names = "rx", "tx";
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "disabled";
-+			};
-+		};
-+
-+		flx3: flexcom@e1824000 {
-+			compatible = "atmel,sama5d2-flexcom";
-+			reg = <0xe1824000 0x200>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0x0 0xe1824000 0x800>;
-+			status = "disabled";
-+
-+			uart3: serial@200 {
-+				compatible = "atmel,at91sam9260-usart";
-+				reg = <0x200 0x200>;
-+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
-+				clock-names = "usart";
-+				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
-+					<&dma1 AT91_XDMAC_DT_PERID(11)>;
-+				dma-names = "tx", "rx";
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "disabled";
-+			};
-+		};
-+
-+		trng: rng@e2010000 {
-+			compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
-+			reg = <0xe2010000 0x100>;
-+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
-+			status = "disabled";
-+		};
-+
-+		flx4: flexcom@e2018000 {
-+			compatible = "atmel,sama5d2-flexcom";
-+			reg = <0xe2018000 0x200>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0x0 0xe2018000 0x800>;
-+			status = "disabled";
-+
-+			uart4: serial@200 {
-+				compatible = "atmel,at91sam9260-usart";
-+				reg = <0x200 0x200>;
-+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
-+				clock-names = "usart";
-+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
-+					<&dma1 AT91_XDMAC_DT_PERID(13)>;
-+				dma-names = "tx", "rx";
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				atmel,fifo-size = <16>;
-+				status = "disabled";
-+			};
-+		};
-+
-+		flx7: flexcom@e2024000 {
-+			compatible = "atmel,sama5d2-flexcom";
-+			reg = <0xe2024000 0x200>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0x0 0xe2024000 0x800>;
-+			status = "disabled";
-+
-+			uart7: serial@200 {
-+				compatible = "atmel,at91sam9260-usart";
-+				reg = <0x200 0x200>;
-+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
-+				clock-names = "usart";
-+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
-+					<&dma1 AT91_XDMAC_DT_PERID(19)>;
-+				dma-names = "tx", "rx";
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				atmel,fifo-size = <16>;
-+				status = "disabled";
-+			};
-+		};
-+
-+		gmac0: ethernet@e2800000 {
-+			compatible = "microchip,sama7g5-gem";
-+			reg = <0xe2800000 0x1000>;
-+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
-+				      GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH
-+				      GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
-+				      GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
-+				      GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH
-+				      GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
-+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
-+			assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
-+			assigned-clock-rates = <125000000>;
-+			status = "disabled";
-+		};
-+
-+		gmac1: ethernet@e2804000 {
-+			compatible = "microchip,sama7g5-emac";
-+			reg = <0xe2804000 0x1000>;
-+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
-+				      GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
-+			clock-names = "pclk", "hclk";
-+			status = "disabled";
-+		};
-+
-+		dma0: dma-controller@e2808000 {
-+			compatible = "microchip,sama7g5-dma";
-+			reg = <0xe2808000 0x1000>;
-+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-+			#dma-cells = <1>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
-+			clock-names = "dma_clk";
-+			status = "disabled";
-+		};
-+
-+		dma1: dma-controller@e280c000 {
-+			compatible = "microchip,sama7g5-dma";
-+			reg = <0xe280c000 0x1000>;
-+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-+			#dma-cells = <1>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
-+			clock-names = "dma_clk";
-+			status = "disabled";
-+		};
-+
-+		/* Place dma2 here despite it's address */
-+		dma2: dma-controller@e1200000 {
-+			compatible = "microchip,sama7g5-dma";
-+			reg = <0xe1200000 0x1000>;
-+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-+			#dma-cells = <1>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
-+			clock-names = "dma_clk";
-+			dma-requests = <0>;
-+			status = "disabled";
-+		};
-+
-+		flx8: flexcom@e2818000 {
-+			compatible = "atmel,sama5d2-flexcom";
-+			reg = <0xe2818000 0x200>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0x0 0xe2818000 0x800>;
-+			status = "disabled";
-+
-+			i2c8: i2c@600 {
-+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
-+				reg = <0x600 0x200>;
-+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
-+				atmel,fifo-size = <32>;
-+				dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
-+					<&dma0 AT91_XDMAC_DT_PERID(22)>;
-+				dma-names = "rx", "tx";
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "disabled";
-+			};
-+		};
-+
-+		flx9: flexcom@e281c000 {
-+			compatible = "atmel,sama5d2-flexcom";
-+			reg = <0xe281c000 0x200>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0x0 0xe281c000 0x800>;
-+			status = "disabled";
-+
-+			i2c9: i2c@600 {
-+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
-+				reg = <0x600 0x200>;
-+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
-+				atmel,fifo-size = <32>;
-+				dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
-+					<&dma0 AT91_XDMAC_DT_PERID(24)>;
-+				dma-names = "rx", "tx";
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "disabled";
-+			};
-+		};
-+
-+		flx11: flexcom@e2824000 {
-+			compatible = "atmel,sama5d2-flexcom";
-+			reg = <0xe2824000 0x200>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0x0 0xe2824000 0x800>;
-+			status = "disabled";
-+
-+			spi11: spi@400 {
-+				compatible = "atmel,at91rm9200-spi";
-+				reg = <0x400 0x200>;
-+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-+				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
-+				clock-names = "spi_clk";
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				atmel,fifo-size = <32>;
-+				dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>,
-+					    <&dma0 AT91_XDMAC_DT_PERID(28)>;
-+				dma-names = "rx", "tx";
-+				status = "disabled";
-+			};
-+		};
-+
-+		gic: interrupt-controller@e8c11000 {
-+			compatible = "arm,cortex-a7-gic";
-+			#interrupt-cells = <3>;
-+			#address-cells = <0>;
-+			interrupt-controller;
-+			interrupt-parent;
-+			reg = <0xe8c11000 0x1000>,
-+				<0xe8c12000 0x2000>;
-+		};
-+	};
-+};
diff --git a/target/linux/at91/patches-5.10/223-ARM-at91-pm-do-not-panic-if-ram-controllers-are-not-.patch b/target/linux/at91/patches-5.10/223-ARM-at91-pm-do-not-panic-if-ram-controllers-are-not-.patch
deleted file mode 100644
index 68bf447a03bb..000000000000
--- a/target/linux/at91/patches-5.10/223-ARM-at91-pm-do-not-panic-if-ram-controllers-are-not-.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 76dbc56ad65350d78d12bd9b36b00c36fb27addf Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 23 Aug 2021 16:19:12 +0300
-Subject: [PATCH 223/247] ARM: at91: pm: do not panic if ram controllers are
- not enabled
-
-In case PM is enabled but there is no RAM controller information
-in DT the code will panic. Avoid such scenarios by not initializing
-platform specific PM code in case RAM controller is not provided
-via DT.
-
-Reported-by: Eugen Hristev <eugen.hristev@microchip.com>
-Fixes: 827de1f123ba0 ("ARM: at91: remove at91_dt_initialize and machine init_early()")
-Fixes: 892e1f4a3ae58 ("ARM: at91: pm: add sama7g5 ddr phy controller")
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210823131915.23857-2-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c | 22 ++++++++++++++++------
- 1 file changed, 16 insertions(+), 6 deletions(-)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -589,7 +589,7 @@ static const struct of_device_id ramc_ph
- 	{ /* Sentinel. */ },
- };
- 
--static __init void at91_dt_ramc(bool phy_mandatory)
-+static __init int at91_dt_ramc(bool phy_mandatory)
- {
- 	struct device_node *np;
- 	const struct of_device_id *of_id;
-@@ -625,12 +625,18 @@ static __init void at91_dt_ramc(bool phy
- 	/* Lookup for DDR PHY node, if any. */
- 	for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) {
- 		soc_pm.data.ramc_phy = of_iomap(np, 0);
--		if (!soc_pm.data.ramc_phy)
--			panic(pr_fmt("unable to map ramc phy cpu registers\n"));
-+		if (!soc_pm.data.ramc_phy) {
-+			pr_err("unable to map ramc phy cpu registers\n");
-+			ret = -ENOMEM;
-+			goto unmap_ramc;
-+		}
- 	}
- 
--	if (phy_mandatory && !soc_pm.data.ramc_phy)
--		panic(pr_fmt("DDR PHY is mandatory!\n"));
-+	if (phy_mandatory && !soc_pm.data.ramc_phy) {
-+		pr_err("DDR PHY is mandatory!\n");
-+		ret = -ENODEV;
-+		goto unmap_ramc;
-+	}
- 
- 	if (!standby) {
- 		pr_warn("ramc no standby function available\n");
-@@ -1163,13 +1169,17 @@ void __init sama7_pm_init(void)
- 		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SFRBU) |
- 					  AT91_PM_IOMAP(SHDWC),
- 	};
-+	int ret;
- 
- 	if (!IS_ENABLED(CONFIG_SOC_SAMA7))
- 		return;
- 
- 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
- 
--	at91_dt_ramc(true);
-+	ret = at91_dt_ramc(true);
-+	if (ret)
-+		return;
-+
- 	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
- 	at91_pm_init(NULL);
- 
diff --git a/target/linux/at91/patches-5.10/224-ARM-dts-at91-sama7g5-add-ram-controllers.patch b/target/linux/at91/patches-5.10/224-ARM-dts-at91-sama7g5-add-ram-controllers.patch
deleted file mode 100644
index 11c0f2c1e319..000000000000
--- a/target/linux/at91/patches-5.10/224-ARM-dts-at91-sama7g5-add-ram-controllers.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From cf96a88e44f1fde9f1a30ab335329ff9e895e6f8 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 23 Aug 2021 16:19:13 +0300
-Subject: [PATCH 224/247] ARM: dts: at91: sama7g5: add ram controllers
-
-Add RAM and RAMC PHY controllers. These are necessary for platform
-specific power management code.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210823131915.23857-3-claudiu.beznea@microchip.com
----
- arch/arm/boot/dts/sama7g5.dtsi | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm/boot/dts/sama7g5.dtsi
-+++ b/arch/arm/boot/dts/sama7g5.dtsi
-@@ -515,6 +515,18 @@
- 			};
- 		};
- 
-+		uddrc: uddrc@e3800000 {
-+			compatible = "microchip,sama7g5-uddrc";
-+			reg = <0xe3800000 0x4000>;
-+			status = "okay";
-+		};
-+
-+		ddr3phy: ddr3phy@e3804000 {
-+			compatible = "microchip,sama7g5-ddr3phy";
-+			reg = <0xe3804000 0x1000>;
-+			status = "okay";
-+		};
-+
- 		gic: interrupt-controller@e8c11000 {
- 			compatible = "arm,cortex-a7-gic";
- 			#interrupt-cells = <3>;
diff --git a/target/linux/at91/patches-5.10/225-ARM-dts-at91-sama7g5-add-securam-node.patch b/target/linux/at91/patches-5.10/225-ARM-dts-at91-sama7g5-add-securam-node.patch
deleted file mode 100644
index f264f5c1298e..000000000000
--- a/target/linux/at91/patches-5.10/225-ARM-dts-at91-sama7g5-add-securam-node.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 1da1aae0b207d6a5ac7c3070b8d7c6ef61a32d71 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 23 Aug 2021 16:19:14 +0300
-Subject: [PATCH 225/247] ARM: dts: at91: sama7g5: add securam node
-
-Add securam node.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210823131915.23857-4-claudiu.beznea@microchip.com
----
- arch/arm/boot/dts/sama7g5.dtsi | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/arch/arm/boot/dts/sama7g5.dtsi
-+++ b/arch/arm/boot/dts/sama7g5.dtsi
-@@ -75,6 +75,17 @@
- 		#size-cells = <1>;
- 		ranges;
- 
-+		securam: securam@e0000000 {
-+			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
-+			reg = <0xe0000000 0x4000>;
-+			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0 0xe0000000 0x4000>;
-+			no-memory-wc;
-+			status = "okay";
-+		};
-+
- 		secumod: secumod@e0004000 {
- 			compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
- 			reg = <0xe0004000 0x4000>;
diff --git a/target/linux/at91/patches-5.10/226-ARM-dts-at91-sama7g5-add-shdwc-node.patch b/target/linux/at91/patches-5.10/226-ARM-dts-at91-sama7g5-add-shdwc-node.patch
deleted file mode 100644
index da941918a183..000000000000
--- a/target/linux/at91/patches-5.10/226-ARM-dts-at91-sama7g5-add-shdwc-node.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 372fa27d07f66f97a4bf45621c1b840ce8417a85 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 23 Aug 2021 16:19:15 +0300
-Subject: [PATCH 226/247] ARM: dts: at91: sama7g5: add shdwc node
-
-Add shutdown controller node and enable it.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210823131915.23857-5-claudiu.beznea@microchip.com
----
- arch/arm/boot/dts/at91-sama7g5ek.dts |  9 +++++++++
- arch/arm/boot/dts/sama7g5.dtsi       | 11 +++++++++++
- 2 files changed, 20 insertions(+)
-
---- a/arch/arm/boot/dts/at91-sama7g5ek.dts
-+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
-@@ -634,6 +634,15 @@
- 	pinctrl-0 = <&pinctrl_sdmmc2_default>;
- };
- 
-+&shdwc {
-+	atmel,shdwc-debouncer = <976>;
-+	status = "okay";
-+
-+	input@0 {
-+		reg = <0>;
-+	};
-+};
-+
- &spdifrx {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&pinctrl_spdifrx_default>;
---- a/arch/arm/boot/dts/sama7g5.dtsi
-+++ b/arch/arm/boot/dts/sama7g5.dtsi
-@@ -122,6 +122,17 @@
- 			clock-names = "td_slck", "md_slck", "main_xtal";
- 		};
- 
-+		shdwc: shdwc@e001d010 {
-+			compatible = "microchip,sama7g5-shdwc", "syscon";
-+			reg = <0xe001d010 0x10>;
-+			clocks = <&clk32k 0>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			atmel,wakeup-rtc-timer;
-+			atmel,wakeup-rtt-timer;
-+			status = "disabled";
-+		};
-+
- 		rtt: rtt@e001d020 {
- 			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
- 			reg = <0xe001d020 0x30>;
diff --git a/target/linux/at91/patches-5.10/227-ARM-dts-at91-sama7g5-add-chipid.patch b/target/linux/at91/patches-5.10/227-ARM-dts-at91-sama7g5-add-chipid.patch
deleted file mode 100644
index 3e307e418e7b..000000000000
--- a/target/linux/at91/patches-5.10/227-ARM-dts-at91-sama7g5-add-chipid.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From d216c1ecf978574216ece8140146c8dc0ea400e3 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 8 Sep 2021 12:43:29 +0300
-Subject: [PATCH 227/247] ARM: dts: at91: sama7g5: add chipid
-
-Add chipid node for sama7g5.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210908094329.182477-1-claudiu.beznea@microchip.com
----
- arch/arm/boot/dts/sama7g5.dtsi | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/arm/boot/dts/sama7g5.dtsi
-+++ b/arch/arm/boot/dts/sama7g5.dtsi
-@@ -159,6 +159,11 @@
- 			clocks = <&clk32k 0>;
- 		};
- 
-+		chipid@e0020000 {
-+			compatible = "microchip,sama7g5-chipid";
-+			reg = <0xe0020000 0x8>;
-+		};
-+
- 		sdmmc0: mmc@e1204000 {
- 			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
- 			reg = <0xe1204000 0x4000>;
diff --git a/target/linux/at91/patches-5.10/228-ARM-at91-pm-switch-backup-area-to-vbat-in-backup-mod.patch b/target/linux/at91/patches-5.10/228-ARM-at91-pm-switch-backup-area-to-vbat-in-backup-mod.patch
deleted file mode 100644
index 02532b4722a3..000000000000
--- a/target/linux/at91/patches-5.10/228-ARM-at91-pm-switch-backup-area-to-vbat-in-backup-mod.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From 2cd84ddf0e9623c6bc723b1df368cd8b16a3a8e2 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 30 Aug 2021 13:09:27 +0300
-Subject: [PATCH 228/247] ARM: at91: pm: switch backup area to vbat in backup
- mode
-
-Backup area is now switched to VDDIN33 at boot (with the help of
-bootloader). When switching to backup mode we need to switch backup area
-to VBAT as all the other power sources are cut off. The resuming from
-backup mode is done with the help of bootloader, so there is no need to
-do something particular in Linux to restore backup area power source.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210830100927.22711-1-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm.c | 52 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 52 insertions(+)
-
---- a/arch/arm/mach-at91/pm.c
-+++ b/arch/arm/mach-at91/pm.c
-@@ -47,12 +47,26 @@ struct at91_pm_bu {
- 	unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION];
- };
- 
-+/*
-+ * struct at91_pm_sfrbu_offsets: registers mapping for SFRBU
-+ * @pswbu: power switch BU control registers
-+ */
-+struct at91_pm_sfrbu_regs {
-+	struct {
-+		u32 key;
-+		u32 ctrl;
-+		u32 state;
-+		u32 softsw;
-+	} pswbu;
-+};
-+
- /**
-  * struct at91_soc_pm - AT91 SoC power management data structure
-  * @config_shdwc_ws: wakeup sources configuration function for SHDWC
-  * @config_pmc_ws: wakeup srouces configuration function for PMC
-  * @ws_ids: wakup sources of_device_id array
-  * @data: PM data to be used on last phase of suspend
-+ * @sfrbu_regs: SFRBU registers mapping
-  * @bu: backup unit mapped data (for backup mode)
-  * @memcs: memory chip select
-  */
-@@ -62,6 +76,7 @@ struct at91_soc_pm {
- 	const struct of_device_id *ws_ids;
- 	struct at91_pm_bu *bu;
- 	struct at91_pm_data data;
-+	struct at91_pm_sfrbu_regs sfrbu_regs;
- 	void *memcs;
- };
- 
-@@ -356,9 +371,36 @@ static int at91_suspend_finish(unsigned
- 	return 0;
- }
- 
-+static void at91_pm_switch_ba_to_vbat(void)
-+{
-+	unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
-+	unsigned int val;
-+
-+	/* Just for safety. */
-+	if (!soc_pm.data.sfrbu)
-+		return;
-+
-+	val = readl(soc_pm.data.sfrbu + offset);
-+
-+	/* Already on VBAT. */
-+	if (!(val & soc_pm.sfrbu_regs.pswbu.state))
-+		return;
-+
-+	val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
-+	val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
-+	writel(val, soc_pm.data.sfrbu + offset);
-+
-+	/* Wait for update. */
-+	val = readl(soc_pm.data.sfrbu + offset);
-+	while (val & soc_pm.sfrbu_regs.pswbu.state)
-+		val = readl(soc_pm.data.sfrbu + offset);
-+}
-+
- static void at91_pm_suspend(suspend_state_t state)
- {
- 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
-+		at91_pm_switch_ba_to_vbat();
-+
- 		cpu_suspend(0, at91_suspend_finish);
- 
- 		/* The SRAM is lost between suspend cycles */
-@@ -1155,6 +1197,11 @@ void __init sama5d2_pm_init(void)
- 	soc_pm.ws_ids = sama5d2_ws_ids;
- 	soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
- 	soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
-+
-+	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
-+	soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
-+	soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
-+	soc_pm.sfrbu_regs.pswbu.state = BIT(3);
- }
- 
- void __init sama7_pm_init(void)
-@@ -1185,6 +1232,11 @@ void __init sama7_pm_init(void)
- 
- 	soc_pm.ws_ids = sama7g5_ws_ids;
- 	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
-+
-+	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
-+	soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
-+	soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
-+	soc_pm.sfrbu_regs.pswbu.state = BIT(2);
- }
- 
- static int __init at91_pm_modes_select(char *str)
diff --git a/target/linux/at91/patches-5.10/229-ARM-dts-at91-sama7g5ek-add-suspend-voltage-for-ddr3l.patch b/target/linux/at91/patches-5.10/229-ARM-dts-at91-sama7g5ek-add-suspend-voltage-for-ddr3l.patch
deleted file mode 100644
index b5074b58a09f..000000000000
--- a/target/linux/at91/patches-5.10/229-ARM-dts-at91-sama7g5ek-add-suspend-voltage-for-ddr3l.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From e5f87471392b344b1261d1eaf93fd44710587ea9 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 30 Sep 2021 18:42:17 +0300
-Subject: [PATCH 229/247] ARM: dts: at91: sama7g5ek: add suspend voltage for
- ddr3l rail
-
-SAMA7G5-EK board has DDR3L type of memory soldered. This needs 1.35V. The
-1.35V for DDR3L rail at run-time is selected by the proper configuration
-on SELV2 pin (for 1.35V it needs to be in high-z state). When suspended
-the MCP16502 PMIC soldered on SAMA7G5-EK will use different sets of
-configuration registers to provide proper voltages on its rail. Run-time
-configuration registers could be configured differently than suspend
-configuration register for MCP16502 (VSEL2 affects only run-time
-configuration). In suspend states the DDR3L memory soldered on SAMA7G5-EK
-switches to self-refresh. Even on self-refresh it needs to be powered by
-a 1.35V rail. Thus, make sure the PMIC is configured properly when system
-is suspended.
-
-Fixes: 7540629e2fc7 (ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210930154219.2214051-2-claudiu.beznea@microchip.com
----
- arch/arm/boot/dts/at91-sama7g5ek.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm/boot/dts/at91-sama7g5ek.dts
-+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
-@@ -196,11 +196,13 @@
- 
- 					regulator-state-standby {
- 						regulator-on-in-suspend;
-+						regulator-suspend-microvolt = <1350000>;
- 						regulator-mode = <4>;
- 					};
- 
- 					regulator-state-mem {
- 						regulator-on-in-suspend;
-+						regulator-suspend-microvolt = <1350000>;
- 						regulator-mode = <4>;
- 					};
- 				};
diff --git a/target/linux/at91/patches-5.10/230-ARM-at91-pm-group-constants-and-addresses-loading.patch b/target/linux/at91/patches-5.10/230-ARM-at91-pm-group-constants-and-addresses-loading.patch
deleted file mode 100644
index e952f6c3773f..000000000000
--- a/target/linux/at91/patches-5.10/230-ARM-at91-pm-group-constants-and-addresses-loading.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 12330a9f6b99622e3c21ddcc720b02431b8a6e2d Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 30 Sep 2021 18:42:18 +0300
-Subject: [PATCH 230/247] ARM: at91: pm: group constants and addresses loading
-
-Group constants and addresses loading. This commit prepares the field for
-the next one.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210930154219.2214051-3-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm_suspend.S | 17 +++++++++--------
- 1 file changed, 9 insertions(+), 8 deletions(-)
-
---- a/arch/arm/mach-at91/pm_suspend.S
-+++ b/arch/arm/mach-at91/pm_suspend.S
-@@ -1014,6 +1014,15 @@ ENTRY(at91_pm_suspend_in_sram)
- 	mov	tmp1, #0
- 	mcr	p15, 0, tmp1, c7, c10, 4
- 
-+	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
-+	str	tmp1, .mckr_offset
-+	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
-+	str	tmp1, .pmc_version
-+	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
-+	str	tmp1, .memtype
-+	ldr	tmp1, [r0, #PM_DATA_MODE]
-+	str	tmp1, .pm_mode
-+
- 	ldr	tmp1, [r0, #PM_DATA_PMC]
- 	str	tmp1, .pmc_base
- 	ldr	tmp1, [r0, #PM_DATA_RAMC0]
-@@ -1022,14 +1031,6 @@ ENTRY(at91_pm_suspend_in_sram)
- 	str	tmp1, .sramc1_base
- 	ldr	tmp1, [r0, #PM_DATA_RAMC_PHY]
- 	str	tmp1, .sramc_phy_base
--	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
--	str	tmp1, .memtype
--	ldr	tmp1, [r0, #PM_DATA_MODE]
--	str	tmp1, .pm_mode
--	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
--	str	tmp1, .mckr_offset
--	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
--	str	tmp1, .pmc_version
- 	/* Both ldrne below are here to preload their address in the TLB */
- 	ldr	tmp1, [r0, #PM_DATA_SHDWC]
- 	str	tmp1, .shdwc
diff --git a/target/linux/at91/patches-5.10/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch b/target/linux/at91/patches-5.10/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch
deleted file mode 100644
index bd7fb4e39ef2..000000000000
--- a/target/linux/at91/patches-5.10/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 6075bbc75e55258a762d618cd459dbe0dd38aff9 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 30 Sep 2021 18:42:19 +0300
-Subject: [PATCH 231/247] ARM: at91: pm: preload base address of controllers in
- tlb
-
-In suspend/resume procedure for AT91 architecture different controllers
-(PMC, SHDWC, RAM, RAM PHY, SFRBU) are accessed to do the proper settings
-for power saving. Commit f0bbf17958e8 ("ARM: at91: pm: add self-refresh
-support for sama7g5") introduced the access to RAMC PHY controller for
-SAMA7G5. The access to this controller is done after RAMC ports are
-closed, thus any TLB walk necessary for RAMC PHY virtual address will
-fail. In the development branch this was not encountered. However, on
-current kernel the issue is reproducible.
-
-To solve the issue the previous mechanism of pre-loading the TLB with
-the RAMC PHY virtual address has been used. However, only the addition
-of this new pre-load breaks the functionality for ARMv5 based
-devices (SAM9X60). This behavior has been encountered previously
-while debugging this code and using the same mechanism for pre-loading
-address for different controllers (e.g. pin controller, the assumption
-being that other requested translations are replaced from TLB).
-
-To solve this new issue the TLB flush + the extension of pre-loading
-the rest of controllers to TLB (e.g. PMC, RAMC) has been added. The
-rest of the controllers should have been pre-loaded previously, anyway.
-
-Fixes: f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5")
-Depends-on: e42cbbe5c9a2 ("ARM: at91: pm: group constants and addresses loading")
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210930154219.2214051-4-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm_suspend.S | 25 ++++++++++++++++++++++++-
- 1 file changed, 24 insertions(+), 1 deletion(-)
-
---- a/arch/arm/mach-at91/pm_suspend.S
-+++ b/arch/arm/mach-at91/pm_suspend.S
-@@ -1014,6 +1014,10 @@ ENTRY(at91_pm_suspend_in_sram)
- 	mov	tmp1, #0
- 	mcr	p15, 0, tmp1, c7, c10, 4
- 
-+	/* Flush tlb. */
-+	mov	r4, #0
-+	mcr	p15, 0, r4, c8, c7, 0
-+
- 	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
- 	str	tmp1, .mckr_offset
- 	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
-@@ -1023,23 +1027,42 @@ ENTRY(at91_pm_suspend_in_sram)
- 	ldr	tmp1, [r0, #PM_DATA_MODE]
- 	str	tmp1, .pm_mode
- 
-+	/*
-+	 * ldrne below are here to preload their address in the TLB as access
-+	 * to RAM may be limited while in self-refresh.
-+	 */
- 	ldr	tmp1, [r0, #PM_DATA_PMC]
- 	str	tmp1, .pmc_base
-+	cmp	tmp1, #0
-+	ldrne	tmp2, [tmp1, #0]
-+
- 	ldr	tmp1, [r0, #PM_DATA_RAMC0]
- 	str	tmp1, .sramc_base
-+	cmp	tmp1, #0
-+	ldrne	tmp2, [tmp1, #0]
-+
- 	ldr	tmp1, [r0, #PM_DATA_RAMC1]
- 	str	tmp1, .sramc1_base
-+	cmp	tmp1, #0
-+	ldrne	tmp2, [tmp1, #0]
-+
-+#ifndef CONFIG_SOC_SAM_V4_V5
-+	/* ldrne below are here to preload their address in the TLB */
- 	ldr	tmp1, [r0, #PM_DATA_RAMC_PHY]
- 	str	tmp1, .sramc_phy_base
--	/* Both ldrne below are here to preload their address in the TLB */
-+	cmp	tmp1, #0
-+	ldrne	tmp2, [tmp1, #0]
-+
- 	ldr	tmp1, [r0, #PM_DATA_SHDWC]
- 	str	tmp1, .shdwc
- 	cmp	tmp1, #0
- 	ldrne	tmp2, [tmp1, #0]
-+
- 	ldr	tmp1, [r0, #PM_DATA_SFRBU]
- 	str	tmp1, .sfrbu
- 	cmp	tmp1, #0
- 	ldrne	tmp2, [tmp1, #0x10]
-+#endif
- 
- 	/* Active the self-refresh mode */
- 	at91_sramc_self_refresh_ena
diff --git a/target/linux/at91/patches-5.10/232-ARM-dts-at91-sama7g5ek-use-proper-slew-rate-settings.patch b/target/linux/at91/patches-5.10/232-ARM-dts-at91-sama7g5ek-use-proper-slew-rate-settings.patch
deleted file mode 100644
index 9b59d9521fe1..000000000000
--- a/target/linux/at91/patches-5.10/232-ARM-dts-at91-sama7g5ek-use-proper-slew-rate-settings.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 98d2c4ca97dde30616fa78ad5677825b1966cec6 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 15 Sep 2021 10:48:35 +0300
-Subject: [PATCH 232/247] ARM: dts: at91: sama7g5ek: use proper slew-rate
- settings for GMACs
-
-Datasheet chapter "EMAC Timings" specifies that while in 3.3V domain
-GMAC's MDIO pins should be configured with slew-rate enabled, while the
-data + signaling pins should be configured with slew-rate disabled when
-GMAC works in RGMII or RMII modes. The pin controller for SAMA7G5 sets
-the slew-rate as enabled for all pins. Adapt the device tree to comply
-with these.
-
-Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210915074836.6574-2-claudiu.beznea@microchip.com
----
- arch/arm/boot/dts/at91-sama7g5ek.dts | 28 ++++++++++++++++++++++------
- 1 file changed, 22 insertions(+), 6 deletions(-)
-
---- a/arch/arm/boot/dts/at91-sama7g5ek.dts
-+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
-@@ -355,7 +355,10 @@
- 	#address-cells = <1>;
- 	#size-cells = <0>;
- 	pinctrl-names = "default";
--	pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>;
-+	pinctrl-0 = <&pinctrl_gmac0_default
-+		     &pinctrl_gmac0_mdio_default
-+		     &pinctrl_gmac0_txck_default
-+		     &pinctrl_gmac0_phy_irq>;
- 	phy-mode = "rgmii-id";
- 	status = "okay";
- 
-@@ -370,7 +373,9 @@
- 	#address-cells = <1>;
- 	#size-cells = <0>;
- 	pinctrl-names = "default";
--	pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>;
-+	pinctrl-0 = <&pinctrl_gmac1_default
-+		     &pinctrl_gmac1_mdio_default
-+		     &pinctrl_gmac1_phy_irq>;
- 	phy-mode = "rmii";
- 	status = "okay";
- 
-@@ -425,14 +430,20 @@
- 			 <PIN_PA15__G0_TXEN>,
- 			 <PIN_PA30__G0_RXCK>,
- 			 <PIN_PA18__G0_RXDV>,
--			 <PIN_PA22__G0_MDC>,
--			 <PIN_PA23__G0_MDIO>,
- 			 <PIN_PA25__G0_125CK>;
-+		slew-rate = <0>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_gmac0_mdio_default: gmac0_mdio_default {
-+		pinmux = <PIN_PA22__G0_MDC>,
-+			 <PIN_PA23__G0_MDIO>;
- 		bias-disable;
- 	};
- 
- 	pinctrl_gmac0_txck_default: gmac0_txck_default {
- 		pinmux = <PIN_PA24__G0_TXCK>;
-+		slew-rate = <0>;
- 		bias-pull-up;
- 	};
- 
-@@ -449,8 +460,13 @@
- 			 <PIN_PD25__G1_RX0>,
- 			 <PIN_PD26__G1_RX1>,
- 			 <PIN_PD27__G1_RXER>,
--			 <PIN_PD24__G1_RXDV>,
--			 <PIN_PD28__G1_MDC>,
-+			 <PIN_PD24__G1_RXDV>;
-+		slew-rate = <0>;
-+		bias-disable;
-+	};
-+
-+	pinctrl_gmac1_mdio_default: gmac1_mdio_default {
-+		pinmux = <PIN_PD28__G1_MDC>,
- 			 <PIN_PD29__G1_MDIO>;
- 		bias-disable;
- 	};
diff --git a/target/linux/at91/patches-5.10/233-ARM-dts-at91-sama7g5ek-to-not-touch-slew-rate-for-SD.patch b/target/linux/at91/patches-5.10/233-ARM-dts-at91-sama7g5ek-to-not-touch-slew-rate-for-SD.patch
deleted file mode 100644
index 61ed933f029c..000000000000
--- a/target/linux/at91/patches-5.10/233-ARM-dts-at91-sama7g5ek-to-not-touch-slew-rate-for-SD.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 4c0b77276307d2cba8ae2595cbae4cc916c84c36 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 15 Sep 2021 10:48:36 +0300
-Subject: [PATCH 233/247] ARM: dts: at91: sama7g5ek: to not touch slew-rate for
- SDMMC pins
-
-With commit c709135e576b ("pinctrl: at91-pio4: add support for slew-rate")
-and commit cbde6c823bfa ("pinctrl: at91-pio4: Fix slew rate disablement")
-the slew-rate is enabled by default for each configured pin. The datasheet
-specifies at chapter "Output Driver AC Characteristics" that HSIO
-drivers (use in SDMMCx and QSPI0 peripherals), don't have a slewrate
-setting but are rather calibrated against an external 1% resistor mounted
-on the SDMMCx_CAL or QSPI0_CAL pins. Depending on the target signal
-frequency and the external load, it is possible to adjust their target
-output impedance. Thus set slew-rate = <0> for SDMMC (QSPI is not enabled
-at the moment in device tree).
-
-Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210915074836.6574-3-claudiu.beznea@microchip.com
----
- arch/arm/boot/dts/at91-sama7g5ek.dts | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/at91-sama7g5ek.dts
-+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
-@@ -558,6 +558,7 @@
- 				 <PIN_PA8__SDMMC0_DAT5>,
- 				 <PIN_PA9__SDMMC0_DAT6>,
- 				 <PIN_PA10__SDMMC0_DAT7>;
-+			slew-rate = <0>;
- 			bias-pull-up;
- 		};
- 
-@@ -565,6 +566,7 @@
- 			pinmux = <PIN_PA0__SDMMC0_CK>,
- 				 <PIN_PA2__SDMMC0_RSTN>,
- 				 <PIN_PA11__SDMMC0_DS>;
-+			slew-rate = <0>;
- 			bias-pull-up;
- 		};
- 	};
-@@ -576,6 +578,7 @@
- 				 <PIN_PC0__SDMMC1_DAT1>,
- 				 <PIN_PC1__SDMMC1_DAT2>,
- 				 <PIN_PC2__SDMMC1_DAT3>;
-+			slew-rate = <0>;
- 			bias-pull-up;
- 		};
- 
-@@ -584,6 +587,7 @@
- 				 <PIN_PB28__SDMMC1_RSTN>,
- 				 <PIN_PC5__SDMMC1_1V8SEL>,
- 				 <PIN_PC4__SDMMC1_CD>;
-+			slew-rate = <0>;
- 			bias-pull-up;
- 		};
- 	};
-@@ -595,11 +599,13 @@
- 				 <PIN_PD6__SDMMC2_DAT1>,
- 				 <PIN_PD7__SDMMC2_DAT2>,
- 				 <PIN_PD8__SDMMC2_DAT3>;
-+			slew-rate = <0>;
- 			bias-pull-up;
- 		};
- 
- 		ck {
- 			pinmux = <PIN_PD4__SDMMC2_CK>;
-+			slew-rate = <0>;
- 			bias-pull-up;
- 		};
- 	};
diff --git a/target/linux/at91/patches-5.10/234-clk-at91-re-factor-clocks-suspend-resume.patch b/target/linux/at91/patches-5.10/234-clk-at91-re-factor-clocks-suspend-resume.patch
deleted file mode 100644
index 5d399f6535e8..000000000000
--- a/target/linux/at91/patches-5.10/234-clk-at91-re-factor-clocks-suspend-resume.patch
+++ /dev/null
@@ -1,1342 +0,0 @@
-From 65bb4687b2a5c6f02f44345540c3389d6e7523e7 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:05 +0300
-Subject: [PATCH 234/247] clk: at91: re-factor clocks suspend/resume
-
-SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where
-most of the SoC's components are powered off (including PMC). Resuming
-from this mode is done with the help of bootloader. Peripherals are not
-aware of the power saving mode thus most of them are disabling clocks in
-proper suspend API and re-enable them in resume API without taking into
-account the previously setup rate. Moreover some of the peripherals are
-acting as wakeup sources and are not disabling the clocks in this
-scenario, when suspending. Since backup mode cuts the power for
-peripherals, in resume part these clocks needs to be re-configured.
-
-The initial PMC suspend/resume code was designed only for SAMA5D2's PMC
-(as it was the only one supporting backup mode). SAMA7G supports also
-backup mode and its PMC is different (few new functionalities, different
-registers offsets, different offsets in registers for each
-functionalities). To address both SAMA5D2 and SAMA7G5 PMC add
-.save_context()/.resume_context() support to each clocks driver and call
-this from PMC driver.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-2-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/clk-generated.c    |  46 +++++--
- drivers/clk/at91/clk-main.c         |  66 ++++++++++
- drivers/clk/at91/clk-master.c       | 194 ++++++++++++++++++++++++++--
- drivers/clk/at91/clk-peripheral.c   |  40 +++++-
- drivers/clk/at91/clk-pll.c          |  39 ++++++
- drivers/clk/at91/clk-programmable.c |  29 ++++-
- drivers/clk/at91/clk-sam9x60-pll.c  |  68 +++++++++-
- drivers/clk/at91/clk-system.c       |  20 +++
- drivers/clk/at91/clk-usb.c          |  27 ++++
- drivers/clk/at91/clk-utmi.c         |  39 ++++++
- drivers/clk/at91/pmc.c              | 147 +--------------------
- drivers/clk/at91/pmc.h              |  24 ++--
- 12 files changed, 558 insertions(+), 181 deletions(-)
-
---- a/drivers/clk/at91/clk-generated.c
-+++ b/drivers/clk/at91/clk-generated.c
-@@ -27,6 +27,7 @@ struct clk_generated {
- 	u32 id;
- 	u32 gckdiv;
- 	const struct clk_pcr_layout *layout;
-+	struct at91_clk_pms pms;
- 	u8 parent_id;
- 	int chg_pid;
- };
-@@ -34,25 +35,35 @@ struct clk_generated {
- #define to_clk_generated(hw) \
- 	container_of(hw, struct clk_generated, hw)
- 
--static int clk_generated_enable(struct clk_hw *hw)
-+static int clk_generated_set(struct clk_generated *gck, int status)
- {
--	struct clk_generated *gck = to_clk_generated(hw);
- 	unsigned long flags;
--
--	pr_debug("GCLK: %s, gckdiv = %d, parent id = %d\n",
--		 __func__, gck->gckdiv, gck->parent_id);
-+	unsigned int enable = status ? AT91_PMC_PCR_GCKEN : 0;
- 
- 	spin_lock_irqsave(gck->lock, flags);
- 	regmap_write(gck->regmap, gck->layout->offset,
- 		     (gck->id & gck->layout->pid_mask));
- 	regmap_update_bits(gck->regmap, gck->layout->offset,
- 			   AT91_PMC_PCR_GCKDIV_MASK | gck->layout->gckcss_mask |
--			   gck->layout->cmd | AT91_PMC_PCR_GCKEN,
-+			   gck->layout->cmd | enable,
- 			   field_prep(gck->layout->gckcss_mask, gck->parent_id) |
- 			   gck->layout->cmd |
- 			   FIELD_PREP(AT91_PMC_PCR_GCKDIV_MASK, gck->gckdiv) |
--			   AT91_PMC_PCR_GCKEN);
-+			   enable);
- 	spin_unlock_irqrestore(gck->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int clk_generated_enable(struct clk_hw *hw)
-+{
-+	struct clk_generated *gck = to_clk_generated(hw);
-+
-+	pr_debug("GCLK: %s, gckdiv = %d, parent id = %d\n",
-+		 __func__, gck->gckdiv, gck->parent_id);
-+
-+	clk_generated_set(gck, 1);
-+
- 	return 0;
- }
- 
-@@ -249,6 +260,23 @@ static int clk_generated_set_rate(struct
- 	return 0;
- }
- 
-+static int clk_generated_save_context(struct clk_hw *hw)
-+{
-+	struct clk_generated *gck = to_clk_generated(hw);
-+
-+	gck->pms.status = clk_generated_is_enabled(&gck->hw);
-+
-+	return 0;
-+}
-+
-+static void clk_generated_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_generated *gck = to_clk_generated(hw);
-+
-+	if (gck->pms.status)
-+		clk_generated_set(gck, gck->pms.status);
-+}
-+
- static const struct clk_ops generated_ops = {
- 	.enable = clk_generated_enable,
- 	.disable = clk_generated_disable,
-@@ -258,6 +286,8 @@ static const struct clk_ops generated_op
- 	.get_parent = clk_generated_get_parent,
- 	.set_parent = clk_generated_set_parent,
- 	.set_rate = clk_generated_set_rate,
-+	.save_context = clk_generated_save_context,
-+	.restore_context = clk_generated_restore_context,
- };
- 
- /**
-@@ -324,8 +354,6 @@ at91_clk_register_generated(struct regma
- 	if (ret) {
- 		kfree(gck);
- 		hw = ERR_PTR(ret);
--	} else {
--		pmc_register_id(id);
- 	}
- 
- 	return hw;
---- a/drivers/clk/at91/clk-main.c
-+++ b/drivers/clk/at91/clk-main.c
-@@ -28,6 +28,7 @@
- struct clk_main_osc {
- 	struct clk_hw hw;
- 	struct regmap *regmap;
-+	struct at91_clk_pms pms;
- };
- 
- #define to_clk_main_osc(hw) container_of(hw, struct clk_main_osc, hw)
-@@ -37,6 +38,7 @@ struct clk_main_rc_osc {
- 	struct regmap *regmap;
- 	unsigned long frequency;
- 	unsigned long accuracy;
-+	struct at91_clk_pms pms;
- };
- 
- #define to_clk_main_rc_osc(hw) container_of(hw, struct clk_main_rc_osc, hw)
-@@ -51,6 +53,7 @@ struct clk_rm9200_main {
- struct clk_sam9x5_main {
- 	struct clk_hw hw;
- 	struct regmap *regmap;
-+	struct at91_clk_pms pms;
- 	u8 parent;
- };
- 
-@@ -120,10 +123,29 @@ static int clk_main_osc_is_prepared(stru
- 	return (status & AT91_PMC_MOSCS) && clk_main_parent_select(tmp);
- }
- 
-+static int clk_main_osc_save_context(struct clk_hw *hw)
-+{
-+	struct clk_main_osc *osc = to_clk_main_osc(hw);
-+
-+	osc->pms.status = clk_main_osc_is_prepared(hw);
-+
-+	return 0;
-+}
-+
-+static void clk_main_osc_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_main_osc *osc = to_clk_main_osc(hw);
-+
-+	if (osc->pms.status)
-+		clk_main_osc_prepare(hw);
-+}
-+
- static const struct clk_ops main_osc_ops = {
- 	.prepare = clk_main_osc_prepare,
- 	.unprepare = clk_main_osc_unprepare,
- 	.is_prepared = clk_main_osc_is_prepared,
-+	.save_context = clk_main_osc_save_context,
-+	.restore_context = clk_main_osc_restore_context,
- };
- 
- struct clk_hw * __init
-@@ -240,12 +262,31 @@ static unsigned long clk_main_rc_osc_rec
- 	return osc->accuracy;
- }
- 
-+static int clk_main_rc_osc_save_context(struct clk_hw *hw)
-+{
-+	struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
-+
-+	osc->pms.status = clk_main_rc_osc_is_prepared(hw);
-+
-+	return 0;
-+}
-+
-+static void clk_main_rc_osc_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
-+
-+	if (osc->pms.status)
-+		clk_main_rc_osc_prepare(hw);
-+}
-+
- static const struct clk_ops main_rc_osc_ops = {
- 	.prepare = clk_main_rc_osc_prepare,
- 	.unprepare = clk_main_rc_osc_unprepare,
- 	.is_prepared = clk_main_rc_osc_is_prepared,
- 	.recalc_rate = clk_main_rc_osc_recalc_rate,
- 	.recalc_accuracy = clk_main_rc_osc_recalc_accuracy,
-+	.save_context = clk_main_rc_osc_save_context,
-+	.restore_context = clk_main_rc_osc_restore_context,
- };
- 
- struct clk_hw * __init
-@@ -465,12 +506,37 @@ static u8 clk_sam9x5_main_get_parent(str
- 	return clk_main_parent_select(status);
- }
- 
-+static int clk_sam9x5_main_save_context(struct clk_hw *hw)
-+{
-+	struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
-+
-+	clkmain->pms.status = clk_main_rc_osc_is_prepared(&clkmain->hw);
-+	clkmain->pms.parent = clk_sam9x5_main_get_parent(&clkmain->hw);
-+
-+	return 0;
-+}
-+
-+static void clk_sam9x5_main_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
-+	int ret;
-+
-+	ret = clk_sam9x5_main_set_parent(hw, clkmain->pms.parent);
-+	if (ret)
-+		return;
-+
-+	if (clkmain->pms.status)
-+		clk_sam9x5_main_prepare(hw);
-+}
-+
- static const struct clk_ops sam9x5_main_ops = {
- 	.prepare = clk_sam9x5_main_prepare,
- 	.is_prepared = clk_sam9x5_main_is_prepared,
- 	.recalc_rate = clk_sam9x5_main_recalc_rate,
- 	.set_parent = clk_sam9x5_main_set_parent,
- 	.get_parent = clk_sam9x5_main_get_parent,
-+	.save_context = clk_sam9x5_main_save_context,
-+	.restore_context = clk_sam9x5_main_restore_context,
- };
- 
- struct clk_hw * __init
---- a/drivers/clk/at91/clk-master.c
-+++ b/drivers/clk/at91/clk-master.c
-@@ -37,6 +37,7 @@ struct clk_master {
- 	spinlock_t *lock;
- 	const struct clk_master_layout *layout;
- 	const struct clk_master_characteristics *characteristics;
-+	struct at91_clk_pms pms;
- 	u32 *mux_table;
- 	u32 mckr;
- 	int chg_pid;
-@@ -112,10 +113,52 @@ static unsigned long clk_master_div_reca
- 	return rate;
- }
- 
-+static int clk_master_div_save_context(struct clk_hw *hw)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+	struct clk_hw *parent_hw = clk_hw_get_parent(hw);
-+	unsigned long flags;
-+	unsigned int mckr, div;
-+
-+	spin_lock_irqsave(master->lock, flags);
-+	regmap_read(master->regmap, master->layout->offset, &mckr);
-+	spin_unlock_irqrestore(master->lock, flags);
-+
-+	mckr &= master->layout->mask;
-+	div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
-+	div = master->characteristics->divisors[div];
-+
-+	master->pms.parent_rate = clk_hw_get_rate(parent_hw);
-+	master->pms.rate = DIV_ROUND_CLOSEST(master->pms.parent_rate, div);
-+
-+	return 0;
-+}
-+
-+static void clk_master_div_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+	unsigned long flags;
-+	unsigned int mckr;
-+	u8 div;
-+
-+	spin_lock_irqsave(master->lock, flags);
-+	regmap_read(master->regmap, master->layout->offset, &mckr);
-+	spin_unlock_irqrestore(master->lock, flags);
-+
-+	mckr &= master->layout->mask;
-+	div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
-+	div = master->characteristics->divisors[div];
-+
-+	if (div != DIV_ROUND_CLOSEST(master->pms.parent_rate, master->pms.rate))
-+		pr_warn("MCKR DIV not configured properly by firmware!\n");
-+}
-+
- static const struct clk_ops master_div_ops = {
- 	.prepare = clk_master_prepare,
- 	.is_prepared = clk_master_is_prepared,
- 	.recalc_rate = clk_master_div_recalc_rate,
-+	.save_context = clk_master_div_save_context,
-+	.restore_context = clk_master_div_restore_context,
- };
- 
- static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate,
-@@ -125,7 +168,9 @@ static int clk_master_div_set_rate(struc
- 	const struct clk_master_characteristics *characteristics =
- 						master->characteristics;
- 	unsigned long flags;
-+	unsigned int mckr, tmp;
- 	int div, i;
-+	int ret;
- 
- 	div = DIV_ROUND_CLOSEST(parent_rate, rate);
- 	if (div > ARRAY_SIZE(characteristics->divisors))
-@@ -145,11 +190,24 @@ static int clk_master_div_set_rate(struc
- 		return -EINVAL;
- 
- 	spin_lock_irqsave(master->lock, flags);
--	regmap_update_bits(master->regmap, master->layout->offset,
--			   (MASTER_DIV_MASK << MASTER_DIV_SHIFT),
--			   (div << MASTER_DIV_SHIFT));
-+	ret = regmap_read(master->regmap, master->layout->offset, &mckr);
-+	if (ret)
-+		goto unlock;
-+
-+	tmp = mckr & master->layout->mask;
-+	tmp = (tmp >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
-+	if (tmp == div)
-+		goto unlock;
-+
-+	mckr &= ~(MASTER_DIV_MASK << MASTER_DIV_SHIFT);
-+	mckr |= (div << MASTER_DIV_SHIFT);
-+	ret = regmap_write(master->regmap, master->layout->offset, mckr);
-+	if (ret)
-+		goto unlock;
-+
- 	while (!clk_master_ready(master))
- 		cpu_relax();
-+unlock:
- 	spin_unlock_irqrestore(master->lock, flags);
- 
- 	return 0;
-@@ -197,12 +255,25 @@ static int clk_master_div_determine_rate
- 	return 0;
- }
- 
-+static void clk_master_div_restore_context_chg(struct clk_hw *hw)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+	int ret;
-+
-+	ret = clk_master_div_set_rate(hw, master->pms.rate,
-+				      master->pms.parent_rate);
-+	if (ret)
-+		pr_warn("Failed to restore MCK DIV clock\n");
-+}
-+
- static const struct clk_ops master_div_ops_chg = {
- 	.prepare = clk_master_prepare,
- 	.is_prepared = clk_master_is_prepared,
- 	.recalc_rate = clk_master_div_recalc_rate,
- 	.determine_rate = clk_master_div_determine_rate,
- 	.set_rate = clk_master_div_set_rate,
-+	.save_context = clk_master_div_save_context,
-+	.restore_context = clk_master_div_restore_context_chg,
- };
- 
- static void clk_sama7g5_master_best_diff(struct clk_rate_request *req,
-@@ -272,7 +343,8 @@ static int clk_master_pres_set_rate(stru
- {
- 	struct clk_master *master = to_clk_master(hw);
- 	unsigned long flags;
--	unsigned int pres;
-+	unsigned int pres, mckr, tmp;
-+	int ret;
- 
- 	pres = DIV_ROUND_CLOSEST(parent_rate, rate);
- 	if (pres > MASTER_PRES_MAX)
-@@ -284,15 +356,27 @@ static int clk_master_pres_set_rate(stru
- 		pres = ffs(pres) - 1;
- 
- 	spin_lock_irqsave(master->lock, flags);
--	regmap_update_bits(master->regmap, master->layout->offset,
--			   (MASTER_PRES_MASK << master->layout->pres_shift),
--			   (pres << master->layout->pres_shift));
-+	ret = regmap_read(master->regmap, master->layout->offset, &mckr);
-+	if (ret)
-+		goto unlock;
-+
-+	mckr &= master->layout->mask;
-+	tmp = (mckr >> master->layout->pres_shift) & MASTER_PRES_MASK;
-+	if (pres == tmp)
-+		goto unlock;
-+
-+	mckr &= ~(MASTER_PRES_MASK << master->layout->pres_shift);
-+	mckr |= (pres << master->layout->pres_shift);
-+	ret = regmap_write(master->regmap, master->layout->offset, mckr);
-+	if (ret)
-+		goto unlock;
- 
- 	while (!clk_master_ready(master))
- 		cpu_relax();
-+unlock:
- 	spin_unlock_irqrestore(master->lock, flags);
- 
--	return 0;
-+	return ret;
- }
- 
- static unsigned long clk_master_pres_recalc_rate(struct clk_hw *hw,
-@@ -330,11 +414,68 @@ static u8 clk_master_pres_get_parent(str
- 	return mckr & AT91_PMC_CSS;
- }
- 
-+static int clk_master_pres_save_context(struct clk_hw *hw)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+	struct clk_hw *parent_hw = clk_hw_get_parent(hw);
-+	unsigned long flags;
-+	unsigned int val, pres;
-+
-+	spin_lock_irqsave(master->lock, flags);
-+	regmap_read(master->regmap, master->layout->offset, &val);
-+	spin_unlock_irqrestore(master->lock, flags);
-+
-+	val &= master->layout->mask;
-+	pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK;
-+	if (pres == MASTER_PRES_MAX && master->characteristics->have_div3_pres)
-+		pres = 3;
-+	else
-+		pres = (1 << pres);
-+
-+	master->pms.parent = val & AT91_PMC_CSS;
-+	master->pms.parent_rate = clk_hw_get_rate(parent_hw);
-+	master->pms.rate = DIV_ROUND_CLOSEST_ULL(master->pms.parent_rate, pres);
-+
-+	return 0;
-+}
-+
-+static void clk_master_pres_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+	unsigned long flags;
-+	unsigned int val, pres;
-+
-+	spin_lock_irqsave(master->lock, flags);
-+	regmap_read(master->regmap, master->layout->offset, &val);
-+	spin_unlock_irqrestore(master->lock, flags);
-+
-+	val &= master->layout->mask;
-+	pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK;
-+	if (pres == MASTER_PRES_MAX && master->characteristics->have_div3_pres)
-+		pres = 3;
-+	else
-+		pres = (1 << pres);
-+
-+	if (master->pms.rate !=
-+	    DIV_ROUND_CLOSEST_ULL(master->pms.parent_rate, pres) ||
-+	    (master->pms.parent != (val & AT91_PMC_CSS)))
-+		pr_warn("MCKR PRES was not configured properly by firmware!\n");
-+}
-+
-+static void clk_master_pres_restore_context_chg(struct clk_hw *hw)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+
-+	clk_master_pres_set_rate(hw, master->pms.rate, master->pms.parent_rate);
-+}
-+
- static const struct clk_ops master_pres_ops = {
- 	.prepare = clk_master_prepare,
- 	.is_prepared = clk_master_is_prepared,
- 	.recalc_rate = clk_master_pres_recalc_rate,
- 	.get_parent = clk_master_pres_get_parent,
-+	.save_context = clk_master_pres_save_context,
-+	.restore_context = clk_master_pres_restore_context,
- };
- 
- static const struct clk_ops master_pres_ops_chg = {
-@@ -344,6 +485,8 @@ static const struct clk_ops master_pres_
- 	.recalc_rate = clk_master_pres_recalc_rate,
- 	.get_parent = clk_master_pres_get_parent,
- 	.set_rate = clk_master_pres_set_rate,
-+	.save_context = clk_master_pres_save_context,
-+	.restore_context = clk_master_pres_restore_context_chg,
- };
- 
- static struct clk_hw * __init
-@@ -539,20 +682,21 @@ static int clk_sama7g5_master_set_parent
- 	return 0;
- }
- 
--static int clk_sama7g5_master_enable(struct clk_hw *hw)
-+static void clk_sama7g5_master_set(struct clk_master *master,
-+				   unsigned int status)
- {
--	struct clk_master *master = to_clk_master(hw);
- 	unsigned long flags;
- 	unsigned int val, cparent;
-+	unsigned int enable = status ? PMC_MCR_EN : 0;
- 
- 	spin_lock_irqsave(master->lock, flags);
- 
- 	regmap_write(master->regmap, PMC_MCR, PMC_MCR_ID(master->id));
- 	regmap_read(master->regmap, PMC_MCR, &val);
- 	regmap_update_bits(master->regmap, PMC_MCR,
--			   PMC_MCR_EN | PMC_MCR_CSS | PMC_MCR_DIV |
-+			   enable | PMC_MCR_CSS | PMC_MCR_DIV |
- 			   PMC_MCR_CMD | PMC_MCR_ID_MSK,
--			   PMC_MCR_EN | (master->parent << PMC_MCR_CSS_SHIFT) |
-+			   enable | (master->parent << PMC_MCR_CSS_SHIFT) |
- 			   (master->div << MASTER_DIV_SHIFT) |
- 			   PMC_MCR_CMD | PMC_MCR_ID(master->id));
- 
-@@ -563,6 +707,13 @@ static int clk_sama7g5_master_enable(str
- 		cpu_relax();
- 
- 	spin_unlock_irqrestore(master->lock, flags);
-+}
-+
-+static int clk_sama7g5_master_enable(struct clk_hw *hw)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+
-+	clk_sama7g5_master_set(master, 1);
- 
- 	return 0;
- }
-@@ -620,6 +771,23 @@ static int clk_sama7g5_master_set_rate(s
- 	return 0;
- }
- 
-+static int clk_sama7g5_master_save_context(struct clk_hw *hw)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+
-+	master->pms.status = clk_sama7g5_master_is_enabled(hw);
-+
-+	return 0;
-+}
-+
-+static void clk_sama7g5_master_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_master *master = to_clk_master(hw);
-+
-+	if (master->pms.status)
-+		clk_sama7g5_master_set(master, master->pms.status);
-+}
-+
- static const struct clk_ops sama7g5_master_ops = {
- 	.enable = clk_sama7g5_master_enable,
- 	.disable = clk_sama7g5_master_disable,
-@@ -629,6 +797,8 @@ static const struct clk_ops sama7g5_mast
- 	.set_rate = clk_sama7g5_master_set_rate,
- 	.get_parent = clk_sama7g5_master_get_parent,
- 	.set_parent = clk_sama7g5_master_set_parent,
-+	.save_context = clk_sama7g5_master_save_context,
-+	.restore_context = clk_sama7g5_master_restore_context,
- };
- 
- struct clk_hw * __init
---- a/drivers/clk/at91/clk-peripheral.c
-+++ b/drivers/clk/at91/clk-peripheral.c
-@@ -37,6 +37,7 @@ struct clk_sam9x5_peripheral {
- 	u32 id;
- 	u32 div;
- 	const struct clk_pcr_layout *layout;
-+	struct at91_clk_pms pms;
- 	bool auto_div;
- 	int chg_pid;
- };
-@@ -155,10 +156,11 @@ static void clk_sam9x5_peripheral_autodi
- 	periph->div = shift;
- }
- 
--static int clk_sam9x5_peripheral_enable(struct clk_hw *hw)
-+static int clk_sam9x5_peripheral_set(struct clk_sam9x5_peripheral *periph,
-+				     unsigned int status)
- {
--	struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
- 	unsigned long flags;
-+	unsigned int enable = status ? AT91_PMC_PCR_EN : 0;
- 
- 	if (periph->id < PERIPHERAL_ID_MIN)
- 		return 0;
-@@ -168,15 +170,21 @@ static int clk_sam9x5_peripheral_enable(
- 		     (periph->id & periph->layout->pid_mask));
- 	regmap_update_bits(periph->regmap, periph->layout->offset,
- 			   periph->layout->div_mask | periph->layout->cmd |
--			   AT91_PMC_PCR_EN,
-+			   enable,
- 			   field_prep(periph->layout->div_mask, periph->div) |
--			   periph->layout->cmd |
--			   AT91_PMC_PCR_EN);
-+			   periph->layout->cmd | enable);
- 	spin_unlock_irqrestore(periph->lock, flags);
- 
- 	return 0;
- }
- 
-+static int clk_sam9x5_peripheral_enable(struct clk_hw *hw)
-+{
-+	struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
-+
-+	return clk_sam9x5_peripheral_set(periph, 1);
-+}
-+
- static void clk_sam9x5_peripheral_disable(struct clk_hw *hw)
- {
- 	struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
-@@ -393,6 +401,23 @@ static int clk_sam9x5_peripheral_set_rat
- 	return -EINVAL;
- }
- 
-+static int clk_sam9x5_peripheral_save_context(struct clk_hw *hw)
-+{
-+	struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
-+
-+	periph->pms.status = clk_sam9x5_peripheral_is_enabled(hw);
-+
-+	return 0;
-+}
-+
-+static void clk_sam9x5_peripheral_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
-+
-+	if (periph->pms.status)
-+		clk_sam9x5_peripheral_set(periph, periph->pms.status);
-+}
-+
- static const struct clk_ops sam9x5_peripheral_ops = {
- 	.enable = clk_sam9x5_peripheral_enable,
- 	.disable = clk_sam9x5_peripheral_disable,
-@@ -400,6 +425,8 @@ static const struct clk_ops sam9x5_perip
- 	.recalc_rate = clk_sam9x5_peripheral_recalc_rate,
- 	.round_rate = clk_sam9x5_peripheral_round_rate,
- 	.set_rate = clk_sam9x5_peripheral_set_rate,
-+	.save_context = clk_sam9x5_peripheral_save_context,
-+	.restore_context = clk_sam9x5_peripheral_restore_context,
- };
- 
- static const struct clk_ops sam9x5_peripheral_chg_ops = {
-@@ -409,6 +436,8 @@ static const struct clk_ops sam9x5_perip
- 	.recalc_rate = clk_sam9x5_peripheral_recalc_rate,
- 	.determine_rate = clk_sam9x5_peripheral_determine_rate,
- 	.set_rate = clk_sam9x5_peripheral_set_rate,
-+	.save_context = clk_sam9x5_peripheral_save_context,
-+	.restore_context = clk_sam9x5_peripheral_restore_context,
- };
- 
- struct clk_hw * __init
-@@ -460,7 +489,6 @@ at91_clk_register_sam9x5_peripheral(stru
- 		hw = ERR_PTR(ret);
- 	} else {
- 		clk_sam9x5_peripheral_autodiv(periph);
--		pmc_register_id(id);
- 	}
- 
- 	return hw;
---- a/drivers/clk/at91/clk-pll.c
-+++ b/drivers/clk/at91/clk-pll.c
-@@ -40,6 +40,7 @@ struct clk_pll {
- 	u16 mul;
- 	const struct clk_pll_layout *layout;
- 	const struct clk_pll_characteristics *characteristics;
-+	struct at91_clk_pms pms;
- };
- 
- static inline bool clk_pll_ready(struct regmap *regmap, int id)
-@@ -260,6 +261,42 @@ static int clk_pll_set_rate(struct clk_h
- 	return 0;
- }
- 
-+static int clk_pll_save_context(struct clk_hw *hw)
-+{
-+	struct clk_pll *pll = to_clk_pll(hw);
-+	struct clk_hw *parent_hw = clk_hw_get_parent(hw);
-+
-+	pll->pms.parent_rate = clk_hw_get_rate(parent_hw);
-+	pll->pms.rate = clk_pll_recalc_rate(&pll->hw, pll->pms.parent_rate);
-+	pll->pms.status = clk_pll_ready(pll->regmap, PLL_REG(pll->id));
-+
-+	return 0;
-+}
-+
-+static void clk_pll_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_pll *pll = to_clk_pll(hw);
-+	unsigned long calc_rate;
-+	unsigned int pllr, pllr_out, pllr_count;
-+	u8 out = 0;
-+
-+	if (pll->characteristics->out)
-+		out = pll->characteristics->out[pll->range];
-+
-+	regmap_read(pll->regmap, PLL_REG(pll->id), &pllr);
-+
-+	calc_rate = (pll->pms.parent_rate / PLL_DIV(pllr)) *
-+		     (PLL_MUL(pllr, pll->layout) + 1);
-+	pllr_count = (pllr >> PLL_COUNT_SHIFT) & PLL_MAX_COUNT;
-+	pllr_out = (pllr >> PLL_OUT_SHIFT) & out;
-+
-+	if (pll->pms.rate != calc_rate ||
-+	    pll->pms.status != clk_pll_ready(pll->regmap, PLL_REG(pll->id)) ||
-+	    pllr_count != PLL_MAX_COUNT ||
-+	    (out && pllr_out != out))
-+		pr_warn("PLLAR was not configured properly by firmware\n");
-+}
-+
- static const struct clk_ops pll_ops = {
- 	.prepare = clk_pll_prepare,
- 	.unprepare = clk_pll_unprepare,
-@@ -267,6 +304,8 @@ static const struct clk_ops pll_ops = {
- 	.recalc_rate = clk_pll_recalc_rate,
- 	.round_rate = clk_pll_round_rate,
- 	.set_rate = clk_pll_set_rate,
-+	.save_context = clk_pll_save_context,
-+	.restore_context = clk_pll_restore_context,
- };
- 
- struct clk_hw * __init
---- a/drivers/clk/at91/clk-programmable.c
-+++ b/drivers/clk/at91/clk-programmable.c
-@@ -24,6 +24,7 @@ struct clk_programmable {
- 	u32 *mux_table;
- 	u8 id;
- 	const struct clk_programmable_layout *layout;
-+	struct at91_clk_pms pms;
- };
- 
- #define to_clk_programmable(hw) container_of(hw, struct clk_programmable, hw)
-@@ -177,12 +178,38 @@ static int clk_programmable_set_rate(str
- 	return 0;
- }
- 
-+static int clk_programmable_save_context(struct clk_hw *hw)
-+{
-+	struct clk_programmable *prog = to_clk_programmable(hw);
-+	struct clk_hw *parent_hw = clk_hw_get_parent(hw);
-+
-+	prog->pms.parent = clk_programmable_get_parent(hw);
-+	prog->pms.parent_rate = clk_hw_get_rate(parent_hw);
-+	prog->pms.rate = clk_programmable_recalc_rate(hw, prog->pms.parent_rate);
-+
-+	return 0;
-+}
-+
-+static void clk_programmable_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_programmable *prog = to_clk_programmable(hw);
-+	int ret;
-+
-+	ret = clk_programmable_set_parent(hw, prog->pms.parent);
-+	if (ret)
-+		return;
-+
-+	clk_programmable_set_rate(hw, prog->pms.rate, prog->pms.parent_rate);
-+}
-+
- static const struct clk_ops programmable_ops = {
- 	.recalc_rate = clk_programmable_recalc_rate,
- 	.determine_rate = clk_programmable_determine_rate,
- 	.get_parent = clk_programmable_get_parent,
- 	.set_parent = clk_programmable_set_parent,
- 	.set_rate = clk_programmable_set_rate,
-+	.save_context = clk_programmable_save_context,
-+	.restore_context = clk_programmable_restore_context,
- };
- 
- struct clk_hw * __init
-@@ -221,8 +248,6 @@ at91_clk_register_programmable(struct re
- 	if (ret) {
- 		kfree(prog);
- 		hw = ERR_PTR(ret);
--	} else {
--		pmc_register_pck(id);
- 	}
- 
- 	return hw;
---- a/drivers/clk/at91/clk-sam9x60-pll.c
-+++ b/drivers/clk/at91/clk-sam9x60-pll.c
-@@ -38,12 +38,14 @@ struct sam9x60_pll_core {
- 
- struct sam9x60_frac {
- 	struct sam9x60_pll_core core;
-+	struct at91_clk_pms pms;
- 	u32 frac;
- 	u16 mul;
- };
- 
- struct sam9x60_div {
- 	struct sam9x60_pll_core core;
-+	struct at91_clk_pms pms;
- 	u8 div;
- };
- 
-@@ -75,9 +77,8 @@ static unsigned long sam9x60_frac_pll_re
- 		DIV_ROUND_CLOSEST_ULL((u64)parent_rate * frac->frac, (1 << 22));
- }
- 
--static int sam9x60_frac_pll_prepare(struct clk_hw *hw)
-+static int sam9x60_frac_pll_set(struct sam9x60_pll_core *core)
- {
--	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
- 	struct sam9x60_frac *frac = to_sam9x60_frac(core);
- 	struct regmap *regmap = core->regmap;
- 	unsigned int val, cfrac, cmul;
-@@ -141,6 +142,13 @@ unlock:
- 	return 0;
- }
- 
-+static int sam9x60_frac_pll_prepare(struct clk_hw *hw)
-+{
-+	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
-+
-+	return sam9x60_frac_pll_set(core);
-+}
-+
- static void sam9x60_frac_pll_unprepare(struct clk_hw *hw)
- {
- 	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
-@@ -280,6 +288,25 @@ unlock:
- 	return ret;
- }
- 
-+static int sam9x60_frac_pll_save_context(struct clk_hw *hw)
-+{
-+	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
-+	struct sam9x60_frac *frac = to_sam9x60_frac(core);
-+
-+	frac->pms.status = sam9x60_pll_ready(core->regmap, core->id);
-+
-+	return 0;
-+}
-+
-+static void sam9x60_frac_pll_restore_context(struct clk_hw *hw)
-+{
-+	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
-+	struct sam9x60_frac *frac = to_sam9x60_frac(core);
-+
-+	if (frac->pms.status)
-+		sam9x60_frac_pll_set(core);
-+}
-+
- static const struct clk_ops sam9x60_frac_pll_ops = {
- 	.prepare = sam9x60_frac_pll_prepare,
- 	.unprepare = sam9x60_frac_pll_unprepare,
-@@ -287,6 +314,8 @@ static const struct clk_ops sam9x60_frac
- 	.recalc_rate = sam9x60_frac_pll_recalc_rate,
- 	.round_rate = sam9x60_frac_pll_round_rate,
- 	.set_rate = sam9x60_frac_pll_set_rate,
-+	.save_context = sam9x60_frac_pll_save_context,
-+	.restore_context = sam9x60_frac_pll_restore_context,
- };
- 
- static const struct clk_ops sam9x60_frac_pll_ops_chg = {
-@@ -296,11 +325,12 @@ static const struct clk_ops sam9x60_frac
- 	.recalc_rate = sam9x60_frac_pll_recalc_rate,
- 	.round_rate = sam9x60_frac_pll_round_rate,
- 	.set_rate = sam9x60_frac_pll_set_rate_chg,
-+	.save_context = sam9x60_frac_pll_save_context,
-+	.restore_context = sam9x60_frac_pll_restore_context,
- };
- 
--static int sam9x60_div_pll_prepare(struct clk_hw *hw)
-+static int sam9x60_div_pll_set(struct sam9x60_pll_core *core)
- {
--	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
- 	struct sam9x60_div *div = to_sam9x60_div(core);
- 	struct regmap *regmap = core->regmap;
- 	unsigned long flags;
-@@ -334,6 +364,13 @@ unlock:
- 	return 0;
- }
- 
-+static int sam9x60_div_pll_prepare(struct clk_hw *hw)
-+{
-+	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
-+
-+	return sam9x60_div_pll_set(core);
-+}
-+
- static void sam9x60_div_pll_unprepare(struct clk_hw *hw)
- {
- 	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
-@@ -482,6 +519,25 @@ unlock:
- 	return 0;
- }
- 
-+static int sam9x60_div_pll_save_context(struct clk_hw *hw)
-+{
-+	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
-+	struct sam9x60_div *div = to_sam9x60_div(core);
-+
-+	div->pms.status = sam9x60_div_pll_is_prepared(hw);
-+
-+	return 0;
-+}
-+
-+static void sam9x60_div_pll_restore_context(struct clk_hw *hw)
-+{
-+	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
-+	struct sam9x60_div *div = to_sam9x60_div(core);
-+
-+	if (div->pms.status)
-+		sam9x60_div_pll_set(core);
-+}
-+
- static const struct clk_ops sam9x60_div_pll_ops = {
- 	.prepare = sam9x60_div_pll_prepare,
- 	.unprepare = sam9x60_div_pll_unprepare,
-@@ -489,6 +545,8 @@ static const struct clk_ops sam9x60_div_
- 	.recalc_rate = sam9x60_div_pll_recalc_rate,
- 	.round_rate = sam9x60_div_pll_round_rate,
- 	.set_rate = sam9x60_div_pll_set_rate,
-+	.save_context = sam9x60_div_pll_save_context,
-+	.restore_context = sam9x60_div_pll_restore_context,
- };
- 
- static const struct clk_ops sam9x60_div_pll_ops_chg = {
-@@ -498,6 +556,8 @@ static const struct clk_ops sam9x60_div_
- 	.recalc_rate = sam9x60_div_pll_recalc_rate,
- 	.round_rate = sam9x60_div_pll_round_rate,
- 	.set_rate = sam9x60_div_pll_set_rate_chg,
-+	.save_context = sam9x60_div_pll_save_context,
-+	.restore_context = sam9x60_div_pll_restore_context,
- };
- 
- struct clk_hw * __init
---- a/drivers/clk/at91/clk-system.c
-+++ b/drivers/clk/at91/clk-system.c
-@@ -20,6 +20,7 @@
- struct clk_system {
- 	struct clk_hw hw;
- 	struct regmap *regmap;
-+	struct at91_clk_pms pms;
- 	u8 id;
- };
- 
-@@ -77,10 +78,29 @@ static int clk_system_is_prepared(struct
- 	return !!(status & (1 << sys->id));
- }
- 
-+static int clk_system_save_context(struct clk_hw *hw)
-+{
-+	struct clk_system *sys = to_clk_system(hw);
-+
-+	sys->pms.status = clk_system_is_prepared(hw);
-+
-+	return 0;
-+}
-+
-+static void clk_system_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_system *sys = to_clk_system(hw);
-+
-+	if (sys->pms.status)
-+		clk_system_prepare(&sys->hw);
-+}
-+
- static const struct clk_ops system_ops = {
- 	.prepare = clk_system_prepare,
- 	.unprepare = clk_system_unprepare,
- 	.is_prepared = clk_system_is_prepared,
-+	.save_context = clk_system_save_context,
-+	.restore_context = clk_system_restore_context,
- };
- 
- struct clk_hw * __init
---- a/drivers/clk/at91/clk-usb.c
-+++ b/drivers/clk/at91/clk-usb.c
-@@ -24,6 +24,7 @@
- struct at91sam9x5_clk_usb {
- 	struct clk_hw hw;
- 	struct regmap *regmap;
-+	struct at91_clk_pms pms;
- 	u32 usbs_mask;
- 	u8 num_parents;
- };
-@@ -148,12 +149,38 @@ static int at91sam9x5_clk_usb_set_rate(s
- 	return 0;
- }
- 
-+static int at91sam9x5_usb_save_context(struct clk_hw *hw)
-+{
-+	struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
-+	struct clk_hw *parent_hw = clk_hw_get_parent(hw);
-+
-+	usb->pms.parent = at91sam9x5_clk_usb_get_parent(hw);
-+	usb->pms.parent_rate = clk_hw_get_rate(parent_hw);
-+	usb->pms.rate = at91sam9x5_clk_usb_recalc_rate(hw, usb->pms.parent_rate);
-+
-+	return 0;
-+}
-+
-+static void at91sam9x5_usb_restore_context(struct clk_hw *hw)
-+{
-+	struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
-+	int ret;
-+
-+	ret = at91sam9x5_clk_usb_set_parent(hw, usb->pms.parent);
-+	if (ret)
-+		return;
-+
-+	at91sam9x5_clk_usb_set_rate(hw, usb->pms.rate, usb->pms.parent_rate);
-+}
-+
- static const struct clk_ops at91sam9x5_usb_ops = {
- 	.recalc_rate = at91sam9x5_clk_usb_recalc_rate,
- 	.determine_rate = at91sam9x5_clk_usb_determine_rate,
- 	.get_parent = at91sam9x5_clk_usb_get_parent,
- 	.set_parent = at91sam9x5_clk_usb_set_parent,
- 	.set_rate = at91sam9x5_clk_usb_set_rate,
-+	.save_context = at91sam9x5_usb_save_context,
-+	.restore_context = at91sam9x5_usb_restore_context,
- };
- 
- static int at91sam9n12_clk_usb_enable(struct clk_hw *hw)
---- a/drivers/clk/at91/clk-utmi.c
-+++ b/drivers/clk/at91/clk-utmi.c
-@@ -23,6 +23,7 @@ struct clk_utmi {
- 	struct clk_hw hw;
- 	struct regmap *regmap_pmc;
- 	struct regmap *regmap_sfr;
-+	struct at91_clk_pms pms;
- };
- 
- #define to_clk_utmi(hw) container_of(hw, struct clk_utmi, hw)
-@@ -113,11 +114,30 @@ static unsigned long clk_utmi_recalc_rat
- 	return UTMI_RATE;
- }
- 
-+static int clk_utmi_save_context(struct clk_hw *hw)
-+{
-+	struct clk_utmi *utmi = to_clk_utmi(hw);
-+
-+	utmi->pms.status = clk_utmi_is_prepared(hw);
-+
-+	return 0;
-+}
-+
-+static void clk_utmi_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_utmi *utmi = to_clk_utmi(hw);
-+
-+	if (utmi->pms.status)
-+		clk_utmi_prepare(hw);
-+}
-+
- static const struct clk_ops utmi_ops = {
- 	.prepare = clk_utmi_prepare,
- 	.unprepare = clk_utmi_unprepare,
- 	.is_prepared = clk_utmi_is_prepared,
- 	.recalc_rate = clk_utmi_recalc_rate,
-+	.save_context = clk_utmi_save_context,
-+	.restore_context = clk_utmi_restore_context,
- };
- 
- static struct clk_hw * __init
-@@ -232,10 +252,29 @@ static int clk_utmi_sama7g5_is_prepared(
- 	return 0;
- }
- 
-+static int clk_utmi_sama7g5_save_context(struct clk_hw *hw)
-+{
-+	struct clk_utmi *utmi = to_clk_utmi(hw);
-+
-+	utmi->pms.status = clk_utmi_sama7g5_is_prepared(hw);
-+
-+	return 0;
-+}
-+
-+static void clk_utmi_sama7g5_restore_context(struct clk_hw *hw)
-+{
-+	struct clk_utmi *utmi = to_clk_utmi(hw);
-+
-+	if (utmi->pms.status)
-+		clk_utmi_sama7g5_prepare(hw);
-+}
-+
- static const struct clk_ops sama7g5_utmi_ops = {
- 	.prepare = clk_utmi_sama7g5_prepare,
- 	.is_prepared = clk_utmi_sama7g5_is_prepared,
- 	.recalc_rate = clk_utmi_recalc_rate,
-+	.save_context = clk_utmi_sama7g5_save_context,
-+	.restore_context = clk_utmi_sama7g5_restore_context,
- };
- 
- struct clk_hw * __init
---- a/drivers/clk/at91/pmc.c
-+++ b/drivers/clk/at91/pmc.c
-@@ -3,6 +3,7 @@
-  *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
-  */
- 
-+#include <linux/clk.h>
- #include <linux/clk-provider.h>
- #include <linux/clkdev.h>
- #include <linux/clk/at91_pmc.h>
-@@ -14,8 +15,6 @@
- 
- #include <asm/proc-fns.h>
- 
--#include <dt-bindings/clock/at91.h>
--
- #include "pmc.h"
- 
- #define PMC_MAX_IDS 128
-@@ -111,147 +110,19 @@ struct pmc_data *pmc_data_allocate(unsig
- }
- 
- #ifdef CONFIG_PM
--static struct regmap *pmcreg;
--
--static u8 registered_ids[PMC_MAX_IDS];
--static u8 registered_pcks[PMC_MAX_PCKS];
--
--static struct
--{
--	u32 scsr;
--	u32 pcsr0;
--	u32 uckr;
--	u32 mor;
--	u32 mcfr;
--	u32 pllar;
--	u32 mckr;
--	u32 usb;
--	u32 imr;
--	u32 pcsr1;
--	u32 pcr[PMC_MAX_IDS];
--	u32 audio_pll0;
--	u32 audio_pll1;
--	u32 pckr[PMC_MAX_PCKS];
--} pmc_cache;
--
--/*
-- * As Peripheral ID 0 is invalid on AT91 chips, the identifier is stored
-- * without alteration in the table, and 0 is for unused clocks.
-- */
--void pmc_register_id(u8 id)
-+static int at91_pmc_suspend(void)
- {
--	int i;
--
--	for (i = 0; i < PMC_MAX_IDS; i++) {
--		if (registered_ids[i] == 0) {
--			registered_ids[i] = id;
--			break;
--		}
--		if (registered_ids[i] == id)
--			break;
--	}
-+	return clk_save_context();
- }
- 
--/*
-- * As Programmable Clock 0 is valid on AT91 chips, there is an offset
-- * of 1 between the stored value and the real clock ID.
-- */
--void pmc_register_pck(u8 pck)
-+static void at91_pmc_resume(void)
- {
--	int i;
--
--	for (i = 0; i < PMC_MAX_PCKS; i++) {
--		if (registered_pcks[i] == 0) {
--			registered_pcks[i] = pck + 1;
--			break;
--		}
--		if (registered_pcks[i] == (pck + 1))
--			break;
--	}
--}
--
--static int pmc_suspend(void)
--{
--	int i;
--	u8 num;
--
--	regmap_read(pmcreg, AT91_PMC_SCSR, &pmc_cache.scsr);
--	regmap_read(pmcreg, AT91_PMC_PCSR, &pmc_cache.pcsr0);
--	regmap_read(pmcreg, AT91_CKGR_UCKR, &pmc_cache.uckr);
--	regmap_read(pmcreg, AT91_CKGR_MOR, &pmc_cache.mor);
--	regmap_read(pmcreg, AT91_CKGR_MCFR, &pmc_cache.mcfr);
--	regmap_read(pmcreg, AT91_CKGR_PLLAR, &pmc_cache.pllar);
--	regmap_read(pmcreg, AT91_PMC_MCKR, &pmc_cache.mckr);
--	regmap_read(pmcreg, AT91_PMC_USB, &pmc_cache.usb);
--	regmap_read(pmcreg, AT91_PMC_IMR, &pmc_cache.imr);
--	regmap_read(pmcreg, AT91_PMC_PCSR1, &pmc_cache.pcsr1);
--
--	for (i = 0; registered_ids[i]; i++) {
--		regmap_write(pmcreg, AT91_PMC_PCR,
--			     (registered_ids[i] & AT91_PMC_PCR_PID_MASK));
--		regmap_read(pmcreg, AT91_PMC_PCR,
--			    &pmc_cache.pcr[registered_ids[i]]);
--	}
--	for (i = 0; registered_pcks[i]; i++) {
--		num = registered_pcks[i] - 1;
--		regmap_read(pmcreg, AT91_PMC_PCKR(num), &pmc_cache.pckr[num]);
--	}
--
--	return 0;
--}
--
--static bool pmc_ready(unsigned int mask)
--{
--	unsigned int status;
--
--	regmap_read(pmcreg, AT91_PMC_SR, &status);
--
--	return ((status & mask) == mask) ? 1 : 0;
--}
--
--static void pmc_resume(void)
--{
--	int i;
--	u8 num;
--	u32 tmp;
--	u32 mask = AT91_PMC_MCKRDY | AT91_PMC_LOCKA;
--
--	regmap_read(pmcreg, AT91_PMC_MCKR, &tmp);
--	if (pmc_cache.mckr != tmp)
--		pr_warn("MCKR was not configured properly by the firmware\n");
--	regmap_read(pmcreg, AT91_CKGR_PLLAR, &tmp);
--	if (pmc_cache.pllar != tmp)
--		pr_warn("PLLAR was not configured properly by the firmware\n");
--
--	regmap_write(pmcreg, AT91_PMC_SCER, pmc_cache.scsr);
--	regmap_write(pmcreg, AT91_PMC_PCER, pmc_cache.pcsr0);
--	regmap_write(pmcreg, AT91_CKGR_UCKR, pmc_cache.uckr);
--	regmap_write(pmcreg, AT91_CKGR_MOR, pmc_cache.mor);
--	regmap_write(pmcreg, AT91_CKGR_MCFR, pmc_cache.mcfr);
--	regmap_write(pmcreg, AT91_PMC_USB, pmc_cache.usb);
--	regmap_write(pmcreg, AT91_PMC_IMR, pmc_cache.imr);
--	regmap_write(pmcreg, AT91_PMC_PCER1, pmc_cache.pcsr1);
--
--	for (i = 0; registered_ids[i]; i++) {
--		regmap_write(pmcreg, AT91_PMC_PCR,
--			     pmc_cache.pcr[registered_ids[i]] |
--			     AT91_PMC_PCR_CMD);
--	}
--	for (i = 0; registered_pcks[i]; i++) {
--		num = registered_pcks[i] - 1;
--		regmap_write(pmcreg, AT91_PMC_PCKR(num), pmc_cache.pckr[num]);
--	}
--
--	if (pmc_cache.uckr & AT91_PMC_UPLLEN)
--		mask |= AT91_PMC_LOCKU;
--
--	while (!pmc_ready(mask))
--		cpu_relax();
-+	clk_restore_context();
- }
- 
- static struct syscore_ops pmc_syscore_ops = {
--	.suspend = pmc_suspend,
--	.resume = pmc_resume,
-+	.suspend = at91_pmc_suspend,
-+	.resume = at91_pmc_resume,
- };
- 
- static const struct of_device_id sama5d2_pmc_dt_ids[] = {
-@@ -271,11 +142,7 @@ static int __init pmc_register_ops(void)
- 		of_node_put(np);
- 		return -ENODEV;
- 	}
--
--	pmcreg = device_node_to_regmap(np);
- 	of_node_put(np);
--	if (IS_ERR(pmcreg))
--		return PTR_ERR(pmcreg);
- 
- 	register_syscore_ops(&pmc_syscore_ops);
- 
---- a/drivers/clk/at91/pmc.h
-+++ b/drivers/clk/at91/pmc.h
-@@ -13,6 +13,8 @@
- #include <linux/regmap.h>
- #include <linux/spinlock.h>
- 
-+#include <dt-bindings/clock/at91.h>
-+
- extern spinlock_t pmc_pcr_lock;
- 
- struct pmc_data {
-@@ -98,6 +100,20 @@ struct clk_pcr_layout {
- 	u32 pid_mask;
- };
- 
-+/**
-+ * struct at91_clk_pms - Power management state for AT91 clock
-+ * @rate: clock rate
-+ * @parent_rate: clock parent rate
-+ * @status: clock status (enabled or disabled)
-+ * @parent: clock parent index
-+ */
-+struct at91_clk_pms {
-+	unsigned long rate;
-+	unsigned long parent_rate;
-+	unsigned int status;
-+	unsigned int parent;
-+};
-+
- #define field_get(_mask, _reg) (((_reg) & (_mask)) >> (ffs(_mask) - 1))
- #define field_prep(_mask, _val) (((_val) << (ffs(_mask) - 1)) & (_mask))
- 
-@@ -248,12 +264,4 @@ struct clk_hw * __init
- at91_clk_sama7g5_register_utmi(struct regmap *regmap, const char *name,
- 			       const char *parent_name);
- 
--#ifdef CONFIG_PM
--void pmc_register_id(u8 id);
--void pmc_register_pck(u8 pck);
--#else
--static inline void pmc_register_id(u8 id) {}
--static inline void pmc_register_pck(u8 pck) {}
--#endif
--
- #endif /* __PMC_H_ */
diff --git a/target/linux/at91/patches-5.10/235-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch b/target/linux/at91/patches-5.10/235-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch
deleted file mode 100644
index 19f1f6fdf2d0..000000000000
--- a/target/linux/at91/patches-5.10/235-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From 63a0c32028148e91ea91cfbf95841c4ecd69d21b Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:06 +0300
-Subject: [PATCH 235/247] clk: at91: pmc: execute suspend/resume only for
- backup mode
-
-Before going to backup mode architecture specific PM code sets the first
-word in securam (file arch/arm/mach-at91/pm.c, function at91_pm_begin()).
-Thus take this into account when suspending/resuming clocks. This will
-avoid executing unnecessary instructions when suspending to non backup
-modes.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-3-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/pmc.c | 39 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/drivers/clk/at91/pmc.c
-+++ b/drivers/clk/at91/pmc.c
-@@ -8,6 +8,7 @@
- #include <linux/clkdev.h>
- #include <linux/clk/at91_pmc.h>
- #include <linux/of.h>
-+#include <linux/of_address.h>
- #include <linux/mfd/syscon.h>
- #include <linux/platform_device.h>
- #include <linux/regmap.h>
-@@ -110,13 +111,35 @@ struct pmc_data *pmc_data_allocate(unsig
- }
- 
- #ifdef CONFIG_PM
-+
-+/* Address in SECURAM that say if we suspend to backup mode. */
-+static void __iomem *at91_pmc_backup_suspend;
-+
- static int at91_pmc_suspend(void)
- {
-+	unsigned int backup;
-+
-+	if (!at91_pmc_backup_suspend)
-+		return 0;
-+
-+	backup = readl_relaxed(at91_pmc_backup_suspend);
-+	if (!backup)
-+		return 0;
-+
- 	return clk_save_context();
- }
- 
- static void at91_pmc_resume(void)
- {
-+	unsigned int backup;
-+
-+	if (!at91_pmc_backup_suspend)
-+		return;
-+
-+	backup = readl_relaxed(at91_pmc_backup_suspend);
-+	if (!backup)
-+		return;
-+
- 	clk_restore_context();
- }
- 
-@@ -144,6 +167,22 @@ static int __init pmc_register_ops(void)
- 	}
- 	of_node_put(np);
- 
-+	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
-+	if (!np)
-+		return -ENODEV;
-+
-+	if (!of_device_is_available(np)) {
-+		of_node_put(np);
-+		return -ENODEV;
-+	}
-+	of_node_put(np);
-+
-+	at91_pmc_backup_suspend = of_iomap(np, 0);
-+	if (!at91_pmc_backup_suspend) {
-+		pr_warn("%s(): unable to map securam\n", __func__);
-+		return -ENOMEM;
-+	}
-+
- 	register_syscore_ops(&pmc_syscore_ops);
- 
- 	return 0;
diff --git a/target/linux/at91/patches-5.10/236-clk-at91-sama7g5-add-securam-s-peripheral-clock.patch b/target/linux/at91/patches-5.10/236-clk-at91-sama7g5-add-securam-s-peripheral-clock.patch
deleted file mode 100644
index 046acec453d7..000000000000
--- a/target/linux/at91/patches-5.10/236-clk-at91-sama7g5-add-securam-s-peripheral-clock.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 50edd53c26177e95995533b7d649801086a52f6c Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:07 +0300
-Subject: [PATCH 236/247] clk: at91: sama7g5: add securam's peripheral clock
-
-Add SECURAM's peripheral clock.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-4-claudiu.beznea@microchip.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/sama7g5.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -377,6 +377,7 @@ static const struct {
- 	u8 id;
- } sama7g5_periphck[] = {
- 	{ .n = "pioA_clk",	.p = "mck0", .id = 11, },
-+	{ .n = "securam_clk",	.p = "mck0", .id = 18, },
- 	{ .n = "sfr_clk",	.p = "mck1", .id = 19, },
- 	{ .n = "hsmc_clk",	.p = "mck1", .id = 21, },
- 	{ .n = "xdmac0_clk",	.p = "mck1", .id = 22, },
diff --git a/target/linux/at91/patches-5.10/237-clk-at91-clk-master-add-register-definition-for-sama.patch b/target/linux/at91/patches-5.10/237-clk-at91-clk-master-add-register-definition-for-sama.patch
deleted file mode 100644
index 726d9b33e40e..000000000000
--- a/target/linux/at91/patches-5.10/237-clk-at91-clk-master-add-register-definition-for-sama.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From c716562753d1e51a1c53647aa77a332f97187d15 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:08 +0300
-Subject: [PATCH 237/247] clk: at91: clk-master: add register definition for
- sama7g5's master clock
-
-SAMA7G5 has 4 master clocks (MCK1..4) which are controlled though the
-register at offset 0x30 (relative to PMC). In the last/first phase of
-suspend/resume procedure (which is architecture specific) the parent
-of master clocks are changed (via assembly code) for more power saving
-(see file arch/arm/mach-at91/pm_suspend.S, macros at91_mckx_ps_enable
-and at91_mckx_ps_restore). Thus the macros corresponding to register
-at offset 0x30 need to be shared b/w clk-master.c and pm_suspend.S.
-commit ec03f18cc222 ("clk: at91: add register definition for sama7g5's
-master clock") introduced the proper macros but didn't adapted the
-clk-master.c as well. Thus, this commit adapt the clk-master.c to use
-the macros introduced in commit ec03f18cc222 ("clk: at91: add register
-definition for sama7g5's master clock").
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-5-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/clk-master.c | 50 ++++++++++++++++-------------------
- 1 file changed, 23 insertions(+), 27 deletions(-)
-
---- a/drivers/clk/at91/clk-master.c
-+++ b/drivers/clk/at91/clk-master.c
-@@ -17,15 +17,7 @@
- #define MASTER_DIV_SHIFT	8
- #define MASTER_DIV_MASK		0x7
- 
--#define PMC_MCR			0x30
--#define PMC_MCR_ID_MSK		GENMASK(3, 0)
--#define PMC_MCR_CMD		BIT(7)
--#define PMC_MCR_DIV		GENMASK(10, 8)
--#define PMC_MCR_CSS		GENMASK(20, 16)
- #define PMC_MCR_CSS_SHIFT	(16)
--#define PMC_MCR_EN		BIT(28)
--
--#define PMC_MCR_ID(x)		((x) & PMC_MCR_ID_MSK)
- 
- #define MASTER_MAX_ID		4
- 
-@@ -687,20 +679,22 @@ static void clk_sama7g5_master_set(struc
- {
- 	unsigned long flags;
- 	unsigned int val, cparent;
--	unsigned int enable = status ? PMC_MCR_EN : 0;
-+	unsigned int enable = status ? AT91_PMC_MCR_V2_EN : 0;
- 
- 	spin_lock_irqsave(master->lock, flags);
- 
--	regmap_write(master->regmap, PMC_MCR, PMC_MCR_ID(master->id));
--	regmap_read(master->regmap, PMC_MCR, &val);
--	regmap_update_bits(master->regmap, PMC_MCR,
--			   enable | PMC_MCR_CSS | PMC_MCR_DIV |
--			   PMC_MCR_CMD | PMC_MCR_ID_MSK,
-+	regmap_write(master->regmap, AT91_PMC_MCR_V2,
-+		     AT91_PMC_MCR_V2_ID(master->id));
-+	regmap_read(master->regmap, AT91_PMC_MCR_V2, &val);
-+	regmap_update_bits(master->regmap, AT91_PMC_MCR_V2,
-+			   enable | AT91_PMC_MCR_V2_CSS | AT91_PMC_MCR_V2_DIV |
-+			   AT91_PMC_MCR_V2_CMD | AT91_PMC_MCR_V2_ID_MSK,
- 			   enable | (master->parent << PMC_MCR_CSS_SHIFT) |
- 			   (master->div << MASTER_DIV_SHIFT) |
--			   PMC_MCR_CMD | PMC_MCR_ID(master->id));
-+			   AT91_PMC_MCR_V2_CMD |
-+			   AT91_PMC_MCR_V2_ID(master->id));
- 
--	cparent = (val & PMC_MCR_CSS) >> PMC_MCR_CSS_SHIFT;
-+	cparent = (val & AT91_PMC_MCR_V2_CSS) >> PMC_MCR_CSS_SHIFT;
- 
- 	/* Wait here only if parent is being changed. */
- 	while ((cparent != master->parent) && !clk_master_ready(master))
-@@ -725,10 +719,12 @@ static void clk_sama7g5_master_disable(s
- 
- 	spin_lock_irqsave(master->lock, flags);
- 
--	regmap_write(master->regmap, PMC_MCR, master->id);
--	regmap_update_bits(master->regmap, PMC_MCR,
--			   PMC_MCR_EN | PMC_MCR_CMD | PMC_MCR_ID_MSK,
--			   PMC_MCR_CMD | PMC_MCR_ID(master->id));
-+	regmap_write(master->regmap, AT91_PMC_MCR_V2, master->id);
-+	regmap_update_bits(master->regmap, AT91_PMC_MCR_V2,
-+			   AT91_PMC_MCR_V2_EN | AT91_PMC_MCR_V2_CMD |
-+			   AT91_PMC_MCR_V2_ID_MSK,
-+			   AT91_PMC_MCR_V2_CMD |
-+			   AT91_PMC_MCR_V2_ID(master->id));
- 
- 	spin_unlock_irqrestore(master->lock, flags);
- }
-@@ -741,12 +737,12 @@ static int clk_sama7g5_master_is_enabled
- 
- 	spin_lock_irqsave(master->lock, flags);
- 
--	regmap_write(master->regmap, PMC_MCR, master->id);
--	regmap_read(master->regmap, PMC_MCR, &val);
-+	regmap_write(master->regmap, AT91_PMC_MCR_V2, master->id);
-+	regmap_read(master->regmap, AT91_PMC_MCR_V2, &val);
- 
- 	spin_unlock_irqrestore(master->lock, flags);
- 
--	return !!(val & PMC_MCR_EN);
-+	return !!(val & AT91_PMC_MCR_V2_EN);
- }
- 
- static int clk_sama7g5_master_set_rate(struct clk_hw *hw, unsigned long rate,
-@@ -842,10 +838,10 @@ at91_clk_sama7g5_register_master(struct
- 	master->mux_table = mux_table;
- 
- 	spin_lock_irqsave(master->lock, flags);
--	regmap_write(master->regmap, PMC_MCR, master->id);
--	regmap_read(master->regmap, PMC_MCR, &val);
--	master->parent = (val & PMC_MCR_CSS) >> PMC_MCR_CSS_SHIFT;
--	master->div = (val & PMC_MCR_DIV) >> MASTER_DIV_SHIFT;
-+	regmap_write(master->regmap, AT91_PMC_MCR_V2, master->id);
-+	regmap_read(master->regmap, AT91_PMC_MCR_V2, &val);
-+	master->parent = (val & AT91_PMC_MCR_V2_CSS) >> PMC_MCR_CSS_SHIFT;
-+	master->div = (val & AT91_PMC_MCR_V2_DIV) >> MASTER_DIV_SHIFT;
- 	spin_unlock_irqrestore(master->lock, flags);
- 
- 	hw = &master->hw;
diff --git a/target/linux/at91/patches-5.10/238-clk-at91-clk-master-improve-readability-by-using-loc.patch b/target/linux/at91/patches-5.10/238-clk-at91-clk-master-improve-readability-by-using-loc.patch
deleted file mode 100644
index a5b57a67adba..000000000000
--- a/target/linux/at91/patches-5.10/238-clk-at91-clk-master-improve-readability-by-using-loc.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 17b53ad1574cb5f41789993289d3d94f7a50f0ce Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:09 +0300
-Subject: [PATCH 238/247] clk: at91: clk-master: improve readability by using
- local variables
-
-Improve readability in clk_sama7g5_master_set() by using local
-variables.
-
-Suggested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-6-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/clk-master.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/clk/at91/clk-master.c
-+++ b/drivers/clk/at91/clk-master.c
-@@ -680,6 +680,8 @@ static void clk_sama7g5_master_set(struc
- 	unsigned long flags;
- 	unsigned int val, cparent;
- 	unsigned int enable = status ? AT91_PMC_MCR_V2_EN : 0;
-+	unsigned int parent = master->parent << PMC_MCR_CSS_SHIFT;
-+	unsigned int div = master->div << MASTER_DIV_SHIFT;
- 
- 	spin_lock_irqsave(master->lock, flags);
- 
-@@ -689,9 +691,7 @@ static void clk_sama7g5_master_set(struc
- 	regmap_update_bits(master->regmap, AT91_PMC_MCR_V2,
- 			   enable | AT91_PMC_MCR_V2_CSS | AT91_PMC_MCR_V2_DIV |
- 			   AT91_PMC_MCR_V2_CMD | AT91_PMC_MCR_V2_ID_MSK,
--			   enable | (master->parent << PMC_MCR_CSS_SHIFT) |
--			   (master->div << MASTER_DIV_SHIFT) |
--			   AT91_PMC_MCR_V2_CMD |
-+			   enable | parent | div | AT91_PMC_MCR_V2_CMD |
- 			   AT91_PMC_MCR_V2_ID(master->id));
- 
- 	cparent = (val & AT91_PMC_MCR_V2_CSS) >> PMC_MCR_CSS_SHIFT;
diff --git a/target/linux/at91/patches-5.10/239-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch b/target/linux/at91/patches-5.10/239-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch
deleted file mode 100644
index 2918de170084..000000000000
--- a/target/linux/at91/patches-5.10/239-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 8a38e0dda46c9d941a61d8b2e6c14704531b7871 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:10 +0300
-Subject: [PATCH 239/247] clk: at91: pmc: add sama7g5 to the list of available
- pmcs
-
-Add SAMA7G5 to the list of available PMCs such that the suspend/resume
-code for clocks to be used on backup mode.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-7-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/pmc.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/at91/pmc.c
-+++ b/drivers/clk/at91/pmc.c
-@@ -148,8 +148,9 @@ static struct syscore_ops pmc_syscore_op
- 	.resume = at91_pmc_resume,
- };
- 
--static const struct of_device_id sama5d2_pmc_dt_ids[] = {
-+static const struct of_device_id pmc_dt_ids[] = {
- 	{ .compatible = "atmel,sama5d2-pmc" },
-+	{ .compatible = "microchip,sama7g5-pmc", },
- 	{ /* sentinel */ }
- };
- 
-@@ -157,7 +158,7 @@ static int __init pmc_register_ops(void)
- {
- 	struct device_node *np;
- 
--	np = of_find_matching_node(NULL, sama5d2_pmc_dt_ids);
-+	np = of_find_matching_node(NULL, pmc_dt_ids);
- 	if (!np)
- 		return -ENODEV;
- 
diff --git a/target/linux/at91/patches-5.10/240-clk-at91-clk-master-check-if-div-or-pres-is-zero.patch b/target/linux/at91/patches-5.10/240-clk-at91-clk-master-check-if-div-or-pres-is-zero.patch
deleted file mode 100644
index c78883c8d613..000000000000
--- a/target/linux/at91/patches-5.10/240-clk-at91-clk-master-check-if-div-or-pres-is-zero.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From bb8e6ca274763fa98613dbe8b0833348a1d8fe4d Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:12 +0300
-Subject: [PATCH 240/247] clk: at91: clk-master: check if div or pres is zero
-
-Check if div or pres is zero before using it as argument for ffs().
-In case div is zero ffs() will return 0 and thus substracting from
-zero will lead to invalid values to be setup in registers.
-
-Fixes: 7a110b9107ed8 ("clk: at91: clk-master: re-factor master clock")
-Fixes: 75c88143f3b87 ("clk: at91: clk-master: add master clock support for SAMA7G5")
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-9-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/clk-master.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/at91/clk-master.c
-+++ b/drivers/clk/at91/clk-master.c
-@@ -344,7 +344,7 @@ static int clk_master_pres_set_rate(stru
- 
- 	else if (pres == 3)
- 		pres = MASTER_PRES_MAX;
--	else
-+	else if (pres)
- 		pres = ffs(pres) - 1;
- 
- 	spin_lock_irqsave(master->lock, flags);
-@@ -757,7 +757,7 @@ static int clk_sama7g5_master_set_rate(s
- 
- 	if (div == 3)
- 		div = MASTER_PRES_MAX;
--	else
-+	else if (div)
- 		div = ffs(div) - 1;
- 
- 	spin_lock_irqsave(master->lock, flags);
diff --git a/target/linux/at91/patches-5.10/241-clk-at91-clk-master-mask-mckr-against-layout-mask.patch b/target/linux/at91/patches-5.10/241-clk-at91-clk-master-mask-mckr-against-layout-mask.patch
deleted file mode 100644
index 14fa690769c0..000000000000
--- a/target/linux/at91/patches-5.10/241-clk-at91-clk-master-mask-mckr-against-layout-mask.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 27c11c09346b7b9f67eeb39db1b943f4a9742ff3 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:13 +0300
-Subject: [PATCH 241/247] clk: at91: clk-master: mask mckr against layout->mask
-
-Mask values read/written from/to MCKR against layout->mask as this
-mask may be different b/w PMC versions.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-10-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/clk-master.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/at91/clk-master.c
-+++ b/drivers/clk/at91/clk-master.c
-@@ -186,8 +186,8 @@ static int clk_master_div_set_rate(struc
- 	if (ret)
- 		goto unlock;
- 
--	tmp = mckr & master->layout->mask;
--	tmp = (tmp >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
-+	mckr &= master->layout->mask;
-+	tmp = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
- 	if (tmp == div)
- 		goto unlock;
- 
-@@ -384,6 +384,7 @@ static unsigned long clk_master_pres_rec
- 	regmap_read(master->regmap, master->layout->offset, &val);
- 	spin_unlock_irqrestore(master->lock, flags);
- 
-+	val &= master->layout->mask;
- 	pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK;
- 	if (pres == 3 && characteristics->have_div3_pres)
- 		pres = 3;
-@@ -403,6 +404,8 @@ static u8 clk_master_pres_get_parent(str
- 	regmap_read(master->regmap, master->layout->offset, &mckr);
- 	spin_unlock_irqrestore(master->lock, flags);
- 
-+	mckr &= master->layout->mask;
-+
- 	return mckr & AT91_PMC_CSS;
- }
- 
diff --git a/target/linux/at91/patches-5.10/242-clk-at91-clk-master-fix-prescaler-logic.patch b/target/linux/at91/patches-5.10/242-clk-at91-clk-master-fix-prescaler-logic.patch
deleted file mode 100644
index 950ca26afd21..000000000000
--- a/target/linux/at91/patches-5.10/242-clk-at91-clk-master-fix-prescaler-logic.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 4375cd63b55860f5e82618dc5f50846b3129842a Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:14 +0300
-Subject: [PATCH 242/247] clk: at91: clk-master: fix prescaler logic
-
-When prescaler value read from register is MASTER_PRES_MAX it means
-that the input clock will be divided by 3. Fix the code to reflect
-this.
-
-Fixes: 7a110b9107ed8 ("clk: at91: clk-master: re-factor master clock")
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-11-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/clk-master.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/clk/at91/clk-master.c
-+++ b/drivers/clk/at91/clk-master.c
-@@ -386,7 +386,7 @@ static unsigned long clk_master_pres_rec
- 
- 	val &= master->layout->mask;
- 	pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK;
--	if (pres == 3 && characteristics->have_div3_pres)
-+	if (pres == MASTER_PRES_MAX && characteristics->have_div3_pres)
- 		pres = 3;
- 	else
- 		pres = (1 << pres);
diff --git a/target/linux/at91/patches-5.10/243-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch b/target/linux/at91/patches-5.10/243-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch
deleted file mode 100644
index 678303da3717..000000000000
--- a/target/linux/at91/patches-5.10/243-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch
+++ /dev/null
@@ -1,312 +0,0 @@
-From e76d2af5009f52aa02d3db7ae32d150ad66398f9 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:15 +0300
-Subject: [PATCH 243/247] clk: at91: clk-sam9x60-pll: add notifier for div part
- of PLL
-
-SAM9X60's PLL which is also part of SAMA7G5 is composed of 2 parts:
-one fractional part and one divider. On SAMA7G5 the CPU PLL could be
-changed at run-time to implement DVFS. The hardware clock tree on
-SAMA7G5 for CPU PLL is as follows:
-
-                       +---- div1 ----------------> cpuck
-                       |
-FRAC PLL ---> DIV PLL -+-> prescaler ---> div0 ---> mck0
-
-The div1 block is not implemented in Linux; on prescaler block it has
-been discovered a bug on some scenarios and will be removed from Linux
-in next commits. Thus, the final clock tree that will be used in Linux
-will be as follows:
-
-                       +-----------> cpuck
-                       |
-FRAC PLL ---> DIV PLL -+-> div0 ---> mck0
-
-It has been proposed in [1] to not introduce a new CPUFreq driver but
-to overload the proper clock drivers with proper operation such that
-cpufreq-dt to be used. To accomplish this DIV PLL and div0 implement
-clock notifiers which applies safe dividers before FRAC PLL is changed.
-The current commit treats only the DIV PLL by adding a notifier that
-sets a safe divider on PRE_RATE_CHANGE events. The safe divider is
-provided by initialization clock code (sama7g5.c). The div0 is treated
-in next commits (to keep the changes as clean as possible).
-
-[1] https://lore.kernel.org/lkml/20210105104426.4tmgc2l3vyicwedd@vireshk-i7/
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-12-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/clk-sam9x60-pll.c | 102 ++++++++++++++++++++++-------
- drivers/clk/at91/pmc.h             |   3 +-
- drivers/clk/at91/sam9x60.c         |   6 +-
- drivers/clk/at91/sama7g5.c         |  13 +++-
- 4 files changed, 95 insertions(+), 29 deletions(-)
-
---- a/drivers/clk/at91/clk-sam9x60-pll.c
-+++ b/drivers/clk/at91/clk-sam9x60-pll.c
-@@ -5,6 +5,7 @@
-  */
- 
- #include <linux/bitfield.h>
-+#include <linux/clk.h>
- #include <linux/clk-provider.h>
- #include <linux/clkdev.h>
- #include <linux/clk/at91_pmc.h>
-@@ -47,12 +48,15 @@ struct sam9x60_div {
- 	struct sam9x60_pll_core core;
- 	struct at91_clk_pms pms;
- 	u8 div;
-+	u8 safe_div;
- };
- 
- #define to_sam9x60_pll_core(hw)	container_of(hw, struct sam9x60_pll_core, hw)
- #define to_sam9x60_frac(core)	container_of(core, struct sam9x60_frac, core)
- #define to_sam9x60_div(core)	container_of(core, struct sam9x60_div, core)
- 
-+static struct sam9x60_div *notifier_div;
-+
- static inline bool sam9x60_pll_ready(struct regmap *regmap, int id)
- {
- 	unsigned int status;
-@@ -329,6 +333,26 @@ static const struct clk_ops sam9x60_frac
- 	.restore_context = sam9x60_frac_pll_restore_context,
- };
- 
-+/* This function should be called with spinlock acquired. */
-+static void sam9x60_div_pll_set_div(struct sam9x60_pll_core *core, u32 div,
-+				    bool enable)
-+{
-+	struct regmap *regmap = core->regmap;
-+	u32 ena_msk = enable ? core->layout->endiv_mask : 0;
-+	u32 ena_val = enable ? (1 << core->layout->endiv_shift) : 0;
-+
-+	regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
-+			   core->layout->div_mask | ena_msk,
-+			   (div << core->layout->div_shift) | ena_val);
-+
-+	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
-+			   AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
-+			   AT91_PMC_PLL_UPDT_UPDATE | core->id);
-+
-+	while (!sam9x60_pll_ready(regmap, core->id))
-+		cpu_relax();
-+}
-+
- static int sam9x60_div_pll_set(struct sam9x60_pll_core *core)
- {
- 	struct sam9x60_div *div = to_sam9x60_div(core);
-@@ -346,17 +370,7 @@ static int sam9x60_div_pll_set(struct sa
- 	if (!!(val & core->layout->endiv_mask) && cdiv == div->div)
- 		goto unlock;
- 
--	regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
--			   core->layout->div_mask | core->layout->endiv_mask,
--			   (div->div << core->layout->div_shift) |
--			   (1 << core->layout->endiv_shift));
--
--	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
--			   AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
--			   AT91_PMC_PLL_UPDT_UPDATE | core->id);
--
--	while (!sam9x60_pll_ready(regmap, core->id))
--		cpu_relax();
-+	sam9x60_div_pll_set_div(core, div->div, 1);
- 
- unlock:
- 	spin_unlock_irqrestore(core->lock, flags);
-@@ -502,16 +516,7 @@ static int sam9x60_div_pll_set_rate_chg(
- 	if (cdiv == div->div)
- 		goto unlock;
- 
--	regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
--			   core->layout->div_mask,
--			   (div->div << core->layout->div_shift));
--
--	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
--			   AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
--			   AT91_PMC_PLL_UPDT_UPDATE | core->id);
--
--	while (!sam9x60_pll_ready(regmap, core->id))
--		cpu_relax();
-+	sam9x60_div_pll_set_div(core, div->div, 0);
- 
- unlock:
- 	spin_unlock_irqrestore(core->lock, irqflags);
-@@ -538,6 +543,48 @@ static void sam9x60_div_pll_restore_cont
- 		sam9x60_div_pll_set(core);
- }
- 
-+static int sam9x60_div_pll_notifier_fn(struct notifier_block *notifier,
-+				       unsigned long code, void *data)
-+{
-+	struct sam9x60_div *div = notifier_div;
-+	struct sam9x60_pll_core core = div->core;
-+	struct regmap *regmap = core.regmap;
-+	unsigned long irqflags;
-+	u32 val, cdiv;
-+	int ret = NOTIFY_DONE;
-+
-+	if (code != PRE_RATE_CHANGE)
-+		return ret;
-+
-+	/*
-+	 * We switch to safe divider to avoid overclocking of other domains
-+	 * feed by us while the frac PLL (our parent) is changed.
-+	 */
-+	div->div = div->safe_div;
-+
-+	spin_lock_irqsave(core.lock, irqflags);
-+	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK,
-+			   core.id);
-+	regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
-+	cdiv = (val & core.layout->div_mask) >> core.layout->div_shift;
-+
-+	/* Stop if nothing changed. */
-+	if (cdiv == div->safe_div)
-+		goto unlock;
-+
-+	sam9x60_div_pll_set_div(&core, div->div, 0);
-+	ret = NOTIFY_OK;
-+
-+unlock:
-+	spin_unlock_irqrestore(core.lock, irqflags);
-+
-+	return ret;
-+}
-+
-+static struct notifier_block sam9x60_div_pll_notifier = {
-+	.notifier_call = sam9x60_div_pll_notifier_fn,
-+};
-+
- static const struct clk_ops sam9x60_div_pll_ops = {
- 	.prepare = sam9x60_div_pll_prepare,
- 	.unprepare = sam9x60_div_pll_unprepare,
-@@ -647,7 +694,8 @@ struct clk_hw * __init
- sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
- 			     const char *name, const char *parent_name, u8 id,
- 			     const struct clk_pll_characteristics *characteristics,
--			     const struct clk_pll_layout *layout, u32 flags)
-+			     const struct clk_pll_layout *layout, u32 flags,
-+			     u32 safe_div)
- {
- 	struct sam9x60_div *div;
- 	struct clk_hw *hw;
-@@ -656,9 +704,13 @@ sam9x60_clk_register_div_pll(struct regm
- 	unsigned int val;
- 	int ret;
- 
--	if (id > PLL_MAX_ID || !lock)
-+	/* We only support one changeable PLL. */
-+	if (id > PLL_MAX_ID || !lock || (safe_div && notifier_div))
- 		return ERR_PTR(-EINVAL);
- 
-+	if (safe_div >= PLL_DIV_MAX)
-+		safe_div = PLL_DIV_MAX - 1;
-+
- 	div = kzalloc(sizeof(*div), GFP_KERNEL);
- 	if (!div)
- 		return ERR_PTR(-ENOMEM);
-@@ -678,6 +730,7 @@ sam9x60_clk_register_div_pll(struct regm
- 	div->core.layout = layout;
- 	div->core.regmap = regmap;
- 	div->core.lock = lock;
-+	div->safe_div = safe_div;
- 
- 	spin_lock_irqsave(div->core.lock, irqflags);
- 
-@@ -693,6 +746,9 @@ sam9x60_clk_register_div_pll(struct regm
- 	if (ret) {
- 		kfree(div);
- 		hw = ERR_PTR(ret);
-+	} else if (div->safe_div) {
-+		notifier_div = div;
-+		clk_notifier_register(hw->clk, &sam9x60_div_pll_notifier);
- 	}
- 
- 	return hw;
---- a/drivers/clk/at91/pmc.h
-+++ b/drivers/clk/at91/pmc.h
-@@ -214,7 +214,8 @@ struct clk_hw * __init
- sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
- 			     const char *name, const char *parent_name, u8 id,
- 			     const struct clk_pll_characteristics *characteristics,
--			     const struct clk_pll_layout *layout, u32 flags);
-+			     const struct clk_pll_layout *layout, u32 flags,
-+			     u32 safe_div);
- 
- struct clk_hw * __init
- sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
---- a/drivers/clk/at91/sam9x60.c
-+++ b/drivers/clk/at91/sam9x60.c
-@@ -242,7 +242,7 @@ static void __init sam9x60_pmc_setup(str
- 					    * This feeds CPU. It should not
- 					    * be disabled.
- 					    */
--					  CLK_IS_CRITICAL | CLK_SET_RATE_GATE);
-+					  CLK_IS_CRITICAL | CLK_SET_RATE_GATE, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -260,7 +260,7 @@ static void __init sam9x60_pmc_setup(str
- 					  &pll_div_layout,
- 					  CLK_SET_RATE_GATE |
- 					  CLK_SET_PARENT_GATE |
--					  CLK_SET_RATE_PARENT);
-+					  CLK_SET_RATE_PARENT, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
-@@ -279,7 +279,7 @@ static void __init sam9x60_pmc_setup(str
- 	hw = at91_clk_register_master_div(regmap, "masterck_div",
- 					  "masterck_pres", &sam9x60_master_layout,
- 					  &mck_characteristics, &mck_lock,
--					  CLK_SET_RATE_GATE);
-+					  CLK_SET_RATE_GATE, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -127,6 +127,8 @@ static const struct clk_pll_characterist
-  * @t:		clock type
-  * @f:		clock flags
-  * @eid:	export index in sama7g5->chws[] array
-+ * @safe_div:	intermediate divider need to be set on PRE_RATE_CHANGE
-+ *		notification
-  */
- static const struct {
- 	const char *n;
-@@ -136,6 +138,7 @@ static const struct {
- 	unsigned long f;
- 	u8 t;
- 	u8 eid;
-+	u8 safe_div;
- } sama7g5_plls[][PLL_ID_MAX] = {
- 	[PLL_ID_CPU] = {
- 		{ .n = "cpupll_fracck",
-@@ -156,7 +159,12 @@ static const struct {
- 		  .t = PLL_TYPE_DIV,
- 		   /* This feeds CPU. It should not be disabled. */
- 		  .f = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
--		  .eid = PMC_CPUPLL, },
-+		  .eid = PMC_CPUPLL,
-+		  /*
-+		   * Safe div=15 should be safe even for switching b/w 1GHz and
-+		   * 90MHz (frac pll might go up to 1.2GHz).
-+		   */
-+		  .safe_div = 15, },
- 	},
- 
- 	[PLL_ID_SYS] = {
-@@ -967,7 +975,8 @@ static void __init sama7g5_pmc_setup(str
- 					sama7g5_plls[i][j].p, i,
- 					sama7g5_plls[i][j].c,
- 					sama7g5_plls[i][j].l,
--					sama7g5_plls[i][j].f);
-+					sama7g5_plls[i][j].f,
-+					sama7g5_plls[i][j].safe_div);
- 				break;
- 
- 			default:
diff --git a/target/linux/at91/patches-5.10/244-clk-at91-clk-master-add-notifier-for-divider.patch b/target/linux/at91/patches-5.10/244-clk-at91-clk-master-add-notifier-for-divider.patch
deleted file mode 100644
index 35262db6cb72..000000000000
--- a/target/linux/at91/patches-5.10/244-clk-at91-clk-master-add-notifier-for-divider.patch
+++ /dev/null
@@ -1,519 +0,0 @@
-From 75d5d1d584ae73ba0c36d1d7255db6153ca4d3f3 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:16 +0300
-Subject: [PATCH 244/247] clk: at91: clk-master: add notifier for divider
-
-SAMA7G5 supports DVFS by changing cpuck. On SAMA7G5 mck0 shares the same
-parent with cpuck as seen in the following clock tree:
-
-                       +----------> cpuck
-                       |
-FRAC PLL ---> DIV PLL -+-> DIV ---> mck0
-
-mck0 could go b/w 32KHz and 200MHz on SAMA7G5. To avoid mck0 overclocking
-while changing FRAC PLL or DIV PLL the commit implements a notifier for
-mck0 which applies a safe divider to register (maximum value of the divider
-which is 5) on PRE_RATE_CHANGE events (such that changes on PLL to not
-overclock mck0) and sets the maximum allowed rate on POST_RATE_CHANGE
-events.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-13-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/at91rm9200.c  |   2 +-
- drivers/clk/at91/at91sam9260.c |   2 +-
- drivers/clk/at91/at91sam9g45.c |   2 +-
- drivers/clk/at91/at91sam9n12.c |   2 +-
- drivers/clk/at91/at91sam9rl.c  |   2 +-
- drivers/clk/at91/at91sam9x5.c  |   2 +-
- drivers/clk/at91/clk-master.c  | 244 +++++++++++++++++++++++----------
- drivers/clk/at91/dt-compat.c   |   2 +-
- drivers/clk/at91/pmc.h         |   2 +-
- drivers/clk/at91/sama5d2.c     |   2 +-
- drivers/clk/at91/sama5d3.c     |   2 +-
- drivers/clk/at91/sama5d4.c     |   2 +-
- drivers/clk/at91/sama7g5.c     |   2 +-
- 13 files changed, 186 insertions(+), 82 deletions(-)
-
---- a/drivers/clk/at91/at91rm9200.c
-+++ b/drivers/clk/at91/at91rm9200.c
-@@ -152,7 +152,7 @@ static void __init at91rm9200_pmc_setup(
- 					  "masterck_pres",
- 					  &at91rm9200_master_layout,
- 					  &rm9200_mck_characteristics,
--					  &rm9200_mck_lock, CLK_SET_RATE_GATE);
-+					  &rm9200_mck_lock, CLK_SET_RATE_GATE, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
---- a/drivers/clk/at91/at91sam9260.c
-+++ b/drivers/clk/at91/at91sam9260.c
-@@ -429,7 +429,7 @@ static void __init at91sam926x_pmc_setup
- 					  &at91rm9200_master_layout,
- 					  data->mck_characteristics,
- 					  &at91sam9260_mck_lock,
--					  CLK_SET_RATE_GATE);
-+					  CLK_SET_RATE_GATE, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
---- a/drivers/clk/at91/at91sam9g45.c
-+++ b/drivers/clk/at91/at91sam9g45.c
-@@ -164,7 +164,7 @@ static void __init at91sam9g45_pmc_setup
- 					  &at91rm9200_master_layout,
- 					  &mck_characteristics,
- 					  &at91sam9g45_mck_lock,
--					  CLK_SET_RATE_GATE);
-+					  CLK_SET_RATE_GATE, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
---- a/drivers/clk/at91/at91sam9n12.c
-+++ b/drivers/clk/at91/at91sam9n12.c
-@@ -191,7 +191,7 @@ static void __init at91sam9n12_pmc_setup
- 					  &at91sam9x5_master_layout,
- 					  &mck_characteristics,
- 					  &at91sam9n12_mck_lock,
--					  CLK_SET_RATE_GATE);
-+					  CLK_SET_RATE_GATE, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
---- a/drivers/clk/at91/at91sam9rl.c
-+++ b/drivers/clk/at91/at91sam9rl.c
-@@ -132,7 +132,7 @@ static void __init at91sam9rl_pmc_setup(
- 					  "masterck_pres",
- 					  &at91rm9200_master_layout,
- 					  &sam9rl_mck_characteristics,
--					  &sam9rl_mck_lock, CLK_SET_RATE_GATE);
-+					  &sam9rl_mck_lock, CLK_SET_RATE_GATE, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
---- a/drivers/clk/at91/at91sam9x5.c
-+++ b/drivers/clk/at91/at91sam9x5.c
-@@ -210,7 +210,7 @@ static void __init at91sam9x5_pmc_setup(
- 					  "masterck_pres",
- 					  &at91sam9x5_master_layout,
- 					  &mck_characteristics, &mck_lock,
--					  CLK_SET_RATE_GATE);
-+					  CLK_SET_RATE_GATE, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
---- a/drivers/clk/at91/clk-master.c
-+++ b/drivers/clk/at91/clk-master.c
-@@ -5,6 +5,7 @@
- 
- #include <linux/clk-provider.h>
- #include <linux/clkdev.h>
-+#include <linux/clk.h>
- #include <linux/clk/at91_pmc.h>
- #include <linux/of.h>
- #include <linux/mfd/syscon.h>
-@@ -36,8 +37,12 @@ struct clk_master {
- 	u8 id;
- 	u8 parent;
- 	u8 div;
-+	u32 safe_div;
- };
- 
-+/* MCK div reference to be used by notifier. */
-+static struct clk_master *master_div;
-+
- static inline bool clk_master_ready(struct clk_master *master)
- {
- 	unsigned int bit = master->id ? AT91_PMC_MCKXRDY : AT91_PMC_MCKRDY;
-@@ -153,107 +158,81 @@ static const struct clk_ops master_div_o
- 	.restore_context = clk_master_div_restore_context,
- };
- 
--static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate,
--				   unsigned long parent_rate)
-+/* This function must be called with lock acquired. */
-+static int clk_master_div_set(struct clk_master *master,
-+			      unsigned long parent_rate, int div)
- {
--	struct clk_master *master = to_clk_master(hw);
- 	const struct clk_master_characteristics *characteristics =
- 						master->characteristics;
--	unsigned long flags;
--	unsigned int mckr, tmp;
--	int div, i;
-+	unsigned long rate = parent_rate;
-+	unsigned int max_div = 0, div_index = 0, max_div_index = 0;
-+	unsigned int i, mckr, tmp;
- 	int ret;
- 
--	div = DIV_ROUND_CLOSEST(parent_rate, rate);
--	if (div > ARRAY_SIZE(characteristics->divisors))
--		return -EINVAL;
--
- 	for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) {
- 		if (!characteristics->divisors[i])
- 			break;
- 
--		if (div == characteristics->divisors[i]) {
--			div = i;
--			break;
-+		if (div == characteristics->divisors[i])
-+			div_index = i;
-+
-+		if (max_div < characteristics->divisors[i]) {
-+			max_div = characteristics->divisors[i];
-+			max_div_index = i;
- 		}
- 	}
- 
--	if (i == ARRAY_SIZE(characteristics->divisors))
--		return -EINVAL;
-+	if (div > max_div)
-+		div_index = max_div_index;
- 
--	spin_lock_irqsave(master->lock, flags);
- 	ret = regmap_read(master->regmap, master->layout->offset, &mckr);
- 	if (ret)
--		goto unlock;
-+		return ret;
- 
- 	mckr &= master->layout->mask;
- 	tmp = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
--	if (tmp == div)
--		goto unlock;
-+	if (tmp == div_index)
-+		return 0;
-+
-+	rate /= characteristics->divisors[div_index];
-+	if (rate < characteristics->output.min)
-+		pr_warn("master clk div is underclocked");
-+	else if (rate > characteristics->output.max)
-+		pr_warn("master clk div is overclocked");
- 
- 	mckr &= ~(MASTER_DIV_MASK << MASTER_DIV_SHIFT);
--	mckr |= (div << MASTER_DIV_SHIFT);
-+	mckr |= (div_index << MASTER_DIV_SHIFT);
- 	ret = regmap_write(master->regmap, master->layout->offset, mckr);
- 	if (ret)
--		goto unlock;
-+		return ret;
- 
- 	while (!clk_master_ready(master))
- 		cpu_relax();
--unlock:
--	spin_unlock_irqrestore(master->lock, flags);
-+
-+	master->div = characteristics->divisors[div_index];
- 
- 	return 0;
- }
- 
--static int clk_master_div_determine_rate(struct clk_hw *hw,
--					 struct clk_rate_request *req)
-+static unsigned long clk_master_div_recalc_rate_chg(struct clk_hw *hw,
-+						    unsigned long parent_rate)
- {
- 	struct clk_master *master = to_clk_master(hw);
--	const struct clk_master_characteristics *characteristics =
--						master->characteristics;
--	struct clk_hw *parent;
--	unsigned long parent_rate, tmp_rate, best_rate = 0;
--	int i, best_diff = INT_MIN, tmp_diff;
--
--	parent = clk_hw_get_parent(hw);
--	if (!parent)
--		return -EINVAL;
--
--	parent_rate = clk_hw_get_rate(parent);
--	if (!parent_rate)
--		return -EINVAL;
- 
--	for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) {
--		if (!characteristics->divisors[i])
--			break;
--
--		tmp_rate = DIV_ROUND_CLOSEST_ULL(parent_rate,
--						 characteristics->divisors[i]);
--		tmp_diff = abs(tmp_rate - req->rate);
--
--		if (!best_rate || best_diff > tmp_diff) {
--			best_diff = tmp_diff;
--			best_rate = tmp_rate;
--		}
--
--		if (!best_diff)
--			break;
--	}
--
--	req->best_parent_rate = best_rate;
--	req->best_parent_hw = parent;
--	req->rate = best_rate;
--
--	return 0;
-+	return DIV_ROUND_CLOSEST_ULL(parent_rate, master->div);
- }
- 
- static void clk_master_div_restore_context_chg(struct clk_hw *hw)
- {
- 	struct clk_master *master = to_clk_master(hw);
-+	unsigned long flags;
- 	int ret;
- 
--	ret = clk_master_div_set_rate(hw, master->pms.rate,
--				      master->pms.parent_rate);
-+	spin_lock_irqsave(master->lock, flags);
-+	ret = clk_master_div_set(master, master->pms.parent_rate,
-+				 DIV_ROUND_CLOSEST(master->pms.parent_rate,
-+						   master->pms.rate));
-+	spin_unlock_irqrestore(master->lock, flags);
- 	if (ret)
- 		pr_warn("Failed to restore MCK DIV clock\n");
- }
-@@ -261,13 +240,116 @@ static void clk_master_div_restore_conte
- static const struct clk_ops master_div_ops_chg = {
- 	.prepare = clk_master_prepare,
- 	.is_prepared = clk_master_is_prepared,
--	.recalc_rate = clk_master_div_recalc_rate,
--	.determine_rate = clk_master_div_determine_rate,
--	.set_rate = clk_master_div_set_rate,
-+	.recalc_rate = clk_master_div_recalc_rate_chg,
- 	.save_context = clk_master_div_save_context,
- 	.restore_context = clk_master_div_restore_context_chg,
- };
- 
-+static int clk_master_div_notifier_fn(struct notifier_block *notifier,
-+				      unsigned long code, void *data)
-+{
-+	const struct clk_master_characteristics *characteristics =
-+						master_div->characteristics;
-+	struct clk_notifier_data *cnd = data;
-+	unsigned long flags, new_parent_rate, new_rate;
-+	unsigned int mckr, div, new_div = 0;
-+	int ret, i;
-+	long tmp_diff;
-+	long best_diff = -1;
-+
-+	spin_lock_irqsave(master_div->lock, flags);
-+	switch (code) {
-+	case PRE_RATE_CHANGE:
-+		/*
-+		 * We want to avoid any overclocking of MCK DIV domain. To do
-+		 * this we set a safe divider (the underclocking is not of
-+		 * interest as we can go as low as 32KHz). The relation
-+		 * b/w this clock and its parents are as follows:
-+		 *
-+		 * FRAC PLL -> DIV PLL -> MCK DIV
-+		 *
-+		 * With the proper safe divider we should be good even with FRAC
-+		 * PLL at its maximum value.
-+		 */
-+		ret = regmap_read(master_div->regmap, master_div->layout->offset,
-+				  &mckr);
-+		if (ret) {
-+			ret = NOTIFY_STOP_MASK;
-+			goto unlock;
-+		}
-+
-+		mckr &= master_div->layout->mask;
-+		div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
-+
-+		/* Switch to safe divider. */
-+		clk_master_div_set(master_div,
-+				   cnd->old_rate * characteristics->divisors[div],
-+				   master_div->safe_div);
-+		break;
-+
-+	case POST_RATE_CHANGE:
-+		/*
-+		 * At this point we want to restore MCK DIV domain to its maximum
-+		 * allowed rate.
-+		 */
-+		ret = regmap_read(master_div->regmap, master_div->layout->offset,
-+				  &mckr);
-+		if (ret) {
-+			ret = NOTIFY_STOP_MASK;
-+			goto unlock;
-+		}
-+
-+		mckr &= master_div->layout->mask;
-+		div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
-+		new_parent_rate = cnd->new_rate * characteristics->divisors[div];
-+
-+		for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) {
-+			if (!characteristics->divisors[i])
-+				break;
-+
-+			new_rate = DIV_ROUND_CLOSEST_ULL(new_parent_rate,
-+							 characteristics->divisors[i]);
-+
-+			tmp_diff = characteristics->output.max - new_rate;
-+			if (tmp_diff < 0)
-+				continue;
-+
-+			if (best_diff < 0 || best_diff > tmp_diff) {
-+				new_div = characteristics->divisors[i];
-+				best_diff = tmp_diff;
-+			}
-+
-+			if (!tmp_diff)
-+				break;
-+		}
-+
-+		if (!new_div) {
-+			ret = NOTIFY_STOP_MASK;
-+			goto unlock;
-+		}
-+
-+		/* Update the div to preserve MCK DIV clock rate. */
-+		clk_master_div_set(master_div, new_parent_rate,
-+				   new_div);
-+
-+		ret = NOTIFY_OK;
-+		break;
-+
-+	default:
-+		ret = NOTIFY_DONE;
-+		break;
-+	}
-+
-+unlock:
-+	spin_unlock_irqrestore(master_div->lock, flags);
-+
-+	return ret;
-+}
-+
-+static struct notifier_block clk_master_div_notifier = {
-+	.notifier_call = clk_master_div_notifier_fn,
-+};
-+
- static void clk_sama7g5_master_best_diff(struct clk_rate_request *req,
- 					 struct clk_hw *parent,
- 					 unsigned long parent_rate,
-@@ -496,6 +578,8 @@ at91_clk_register_master_internal(struct
- 	struct clk_master *master;
- 	struct clk_init_data init;
- 	struct clk_hw *hw;
-+	unsigned int mckr;
-+	unsigned long irqflags;
- 	int ret;
- 
- 	if (!name || !num_parents || !parent_names || !lock)
-@@ -518,6 +602,16 @@ at91_clk_register_master_internal(struct
- 	master->chg_pid = chg_pid;
- 	master->lock = lock;
- 
-+	if (ops == &master_div_ops_chg) {
-+		spin_lock_irqsave(master->lock, irqflags);
-+		regmap_read(master->regmap, master->layout->offset, &mckr);
-+		spin_unlock_irqrestore(master->lock, irqflags);
-+
-+		mckr &= layout->mask;
-+		mckr = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
-+		master->div = characteristics->divisors[mckr];
-+	}
-+
- 	hw = &master->hw;
- 	ret = clk_hw_register(NULL, &master->hw);
- 	if (ret) {
-@@ -554,19 +648,29 @@ at91_clk_register_master_div(struct regm
- 		const char *name, const char *parent_name,
- 		const struct clk_master_layout *layout,
- 		const struct clk_master_characteristics *characteristics,
--		spinlock_t *lock, u32 flags)
-+		spinlock_t *lock, u32 flags, u32 safe_div)
- {
- 	const struct clk_ops *ops;
-+	struct clk_hw *hw;
- 
- 	if (flags & CLK_SET_RATE_GATE)
- 		ops = &master_div_ops;
- 	else
- 		ops = &master_div_ops_chg;
- 
--	return at91_clk_register_master_internal(regmap, name, 1,
--						 &parent_name, layout,
--						 characteristics, ops,
--						 lock, flags, -EINVAL);
-+	hw = at91_clk_register_master_internal(regmap, name, 1,
-+					       &parent_name, layout,
-+					       characteristics, ops,
-+					       lock, flags, -EINVAL);
-+
-+	if (!IS_ERR(hw) && safe_div) {
-+		master_div = to_clk_master(hw);
-+		master_div->safe_div = safe_div;
-+		clk_notifier_register(hw->clk,
-+				      &clk_master_div_notifier);
-+	}
-+
-+	return hw;
- }
- 
- static unsigned long
---- a/drivers/clk/at91/dt-compat.c
-+++ b/drivers/clk/at91/dt-compat.c
-@@ -399,7 +399,7 @@ of_at91_clk_master_setup(struct device_n
- 
- 	hw = at91_clk_register_master_div(regmap, name, "masterck_pres",
- 					  layout, characteristics,
--					  &mck_lock, CLK_SET_RATE_GATE);
-+					  &mck_lock, CLK_SET_RATE_GATE, 0);
- 	if (IS_ERR(hw))
- 		goto out_free_characteristics;
- 
---- a/drivers/clk/at91/pmc.h
-+++ b/drivers/clk/at91/pmc.h
-@@ -182,7 +182,7 @@ at91_clk_register_master_div(struct regm
- 			     const char *parent_names,
- 			     const struct clk_master_layout *layout,
- 			     const struct clk_master_characteristics *characteristics,
--			     spinlock_t *lock, u32 flags);
-+			     spinlock_t *lock, u32 flags, u32 safe_div);
- 
- struct clk_hw * __init
- at91_clk_sama7g5_register_master(struct regmap *regmap,
---- a/drivers/clk/at91/sama5d2.c
-+++ b/drivers/clk/at91/sama5d2.c
-@@ -249,7 +249,7 @@ static void __init sama5d2_pmc_setup(str
- 					  "masterck_pres",
- 					  &at91sam9x5_master_layout,
- 					  &mck_characteristics, &mck_lock,
--					  CLK_SET_RATE_GATE);
-+					  CLK_SET_RATE_GATE, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
---- a/drivers/clk/at91/sama5d3.c
-+++ b/drivers/clk/at91/sama5d3.c
-@@ -184,7 +184,7 @@ static void __init sama5d3_pmc_setup(str
- 					  "masterck_pres",
- 					  &at91sam9x5_master_layout,
- 					  &mck_characteristics, &mck_lock,
--					  CLK_SET_RATE_GATE);
-+					  CLK_SET_RATE_GATE, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
---- a/drivers/clk/at91/sama5d4.c
-+++ b/drivers/clk/at91/sama5d4.c
-@@ -199,7 +199,7 @@ static void __init sama5d4_pmc_setup(str
- 					  "masterck_pres",
- 					  &at91sam9x5_master_layout,
- 					  &mck_characteristics, &mck_lock,
--					  CLK_SET_RATE_GATE);
-+					  CLK_SET_RATE_GATE, 0);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -1003,7 +1003,7 @@ static void __init sama7g5_pmc_setup(str
- 
- 	hw = at91_clk_register_master_div(regmap, "mck0", "cpuck",
- 					  &mck0_layout, &mck0_characteristics,
--					  &pmc_mck0_lock, 0);
-+					  &pmc_mck0_lock, CLK_GET_RATE_NOCACHE, 5);
- 	if (IS_ERR(hw))
- 		goto err_free;
- 
diff --git a/target/linux/at91/patches-5.10/245-clk-at91-sama7g5-remove-prescaler-part-of-master-clo.patch b/target/linux/at91/patches-5.10/245-clk-at91-sama7g5-remove-prescaler-part-of-master-clo.patch
deleted file mode 100644
index 1ae5076da94d..000000000000
--- a/target/linux/at91/patches-5.10/245-clk-at91-sama7g5-remove-prescaler-part-of-master-clo.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 91a49481af7332853c4c921d46aded8210572210 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:17 +0300
-Subject: [PATCH 245/247] clk: at91: sama7g5: remove prescaler part of master
- clock
-
-On SAMA7G5 the prescaler part of master clock has been implemented as a
-changeable one. Everytime the prescaler is changed the PMC_SR.MCKRDY bit
-must be polled. Value 1 for PMC_SR.MCKRDY means the prescaler update is
-done. Driver polls for this bit until it becomes 1. On SAMA7G5 it has
-been discovered that in some conditions the PMC_SR.MCKRDY is not rising
-but the rate it provides it's stable. The workaround is to add a timeout
-when polling for PMC_SR.MCKRDY. At the moment, for SAMA7G5, the prescaler
-will be removed from Linux clock tree as all the frequencies for CPU could
-be obtained from PLL and also there will be less overhead when changing
-frequency via DVFS.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-14-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/sama7g5.c | 11 +----------
- 1 file changed, 1 insertion(+), 10 deletions(-)
-
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -992,16 +992,7 @@ static void __init sama7g5_pmc_setup(str
- 	}
- 
- 	parent_names[0] = "cpupll_divpmcck";
--	hw = at91_clk_register_master_pres(regmap, "cpuck", 1, parent_names,
--					   &mck0_layout, &mck0_characteristics,
--					   &pmc_mck0_lock,
--					   CLK_SET_RATE_PARENT, 0);
--	if (IS_ERR(hw))
--		goto err_free;
--
--	sama7g5_pmc->chws[PMC_CPU] = hw;
--
--	hw = at91_clk_register_master_div(regmap, "mck0", "cpuck",
-+	hw = at91_clk_register_master_div(regmap, "mck0", "cpupll_divpmcck",
- 					  &mck0_layout, &mck0_characteristics,
- 					  &pmc_mck0_lock, CLK_GET_RATE_NOCACHE, 5);
- 	if (IS_ERR(hw))
diff --git a/target/linux/at91/patches-5.10/246-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch b/target/linux/at91/patches-5.10/246-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch
deleted file mode 100644
index 922cf0b69c32..000000000000
--- a/target/linux/at91/patches-5.10/246-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 9fd5a49f6da9de5da83f4a53eccefad647ab15ed Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:18 +0300
-Subject: [PATCH 246/247] clk: at91: sama7g5: set low limit for mck0 at 32KHz
-
-MCK0 could go as low as 32KHz. Set this limit.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-15-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/at91/sama7g5.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/clk/at91/sama7g5.c
-+++ b/drivers/clk/at91/sama7g5.c
-@@ -850,7 +850,7 @@ static const struct {
- 
- /* MCK0 characteristics. */
- static const struct clk_master_characteristics mck0_characteristics = {
--	.output = { .min = 50000000, .max = 200000000 },
-+	.output = { .min = 32768, .max = 200000000 },
- 	.divisors = { 1, 2, 4, 3, 5 },
- 	.have_div3_pres = 1,
- };
diff --git a/target/linux/at91/patches-5.10/247-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch b/target/linux/at91/patches-5.10/247-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch
deleted file mode 100644
index 436fa1836245..000000000000
--- a/target/linux/at91/patches-5.10/247-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From fe07791494a78d5a4be1363385e6ba7940740644 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Mon, 11 Oct 2021 14:27:19 +0300
-Subject: [PATCH 247/247] clk: use clk_core_get_rate_recalc() in clk_rate_get()
-
-In case clock flags contains CLK_GET_RATE_NOCACHE the clk_rate_get()
-will return the cached rate. Thus, use clk_core_get_rate_recalc() which
-takes proper action when clock flags contains CLK_GET_RATE_NOCACHE.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Link: https://lore.kernel.org/r/20211011112719.3951784-16-claudiu.beznea@microchip.com
-Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-[sboyd@kernel.org: Grab prepare lock around operation]
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/clk.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/clk/clk.c
-+++ b/drivers/clk/clk.c
-@@ -3116,7 +3116,10 @@ static int clk_rate_get(void *data, u64
- {
- 	struct clk_core *core = data;
- 
--	*val = core->rate;
-+	clk_prepare_lock();
-+	*val = clk_core_get_rate_recalc(core);
-+	clk_prepare_unlock();
-+
- 	return 0;
- }
- 
diff --git a/target/linux/at91/patches-5.10/99-scripts-fix-compilation-error.patch b/target/linux/at91/patches-5.10/99-scripts-fix-compilation-error.patch
deleted file mode 100644
index 711c7dfbcc8d..000000000000
--- a/target/linux/at91/patches-5.10/99-scripts-fix-compilation-error.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 6d18eaaaff92f928eab6fad2708b6d28785b4872 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 13 Oct 2021 08:32:07 +0300
-Subject: [PATCH] scripts: fix compilation error
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
----
- scripts/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/scripts/Makefile
-+++ b/scripts/Makefile
-@@ -21,7 +21,7 @@ HOSTCFLAGS_asn1_compiler.o = -I$(srctree
- HOSTCFLAGS_sign-file.o = $(CRYPTO_CFLAGS)
- HOSTLDLIBS_sign-file = $(CRYPTO_LIBS)
- HOSTCFLAGS_extract-cert.o = $(CRYPTO_CFLAGS)
--HOSTLDLIBS_extract-cert = $(CRYPTO_LIBS)
-+HOSTLDLIBS_extract-cert = $(CRYPTO_LIBS) -lpthread
- 
- ifdef CONFIG_UNWINDER_ORC
- ifeq ($(ARCH),x86_64)
diff --git a/target/linux/at91/sam9x/config-5.10 b/target/linux/at91/sam9x/config-5.10
deleted file mode 100644
index 73ee93f2ae19..000000000000
--- a/target/linux/at91/sam9x/config-5.10
+++ /dev/null
@@ -1,312 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_V4 is not set
-CONFIG_ARCH_MULTI_V4T=y
-CONFIG_ARCH_MULTI_V4_V5=y
-CONFIG_ARCH_MULTI_V5=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_AT91RM9200_WATCHDOG is not set
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_AT91_ADC is not set
-CONFIG_AT91_SAMA5D2_ADC=y
-CONFIG_AT91_SOC_ID=y
-# CONFIG_AT91_SOC_SFR is not set
-CONFIG_ATMEL_AIC5_IRQ=y
-CONFIG_ATMEL_AIC_IRQ=y
-CONFIG_ATMEL_CLOCKSOURCE_PIT=y
-CONFIG_ATMEL_CLOCKSOURCE_TCB=y
-CONFIG_ATMEL_EBI=y
-CONFIG_ATMEL_PIT=y
-CONFIG_ATMEL_PM=y
-CONFIG_ATMEL_SDRAMC=y
-CONFIG_ATMEL_SSC=y
-CONFIG_ATMEL_ST=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCLIB=y
-CONFIG_AT_HDMAC=y
-CONFIG_AT_XDMAC=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_PM=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_AT91=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_ARM926T=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_CPU_NO_EFFICIENT_FFS=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC16=y
-CONFIG_CRC7=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DTC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EXT4_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_CACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_ATMEL=y
-CONFIG_HZ=128
-CONFIG_HZ_FIXED=128
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_AT91=y
-# CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL is not set
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_GPIO=y
-CONFIG_IIO=y
-CONFIG_IIO_BUFFER=y
-CONFIG_IIO_KFIFO_BUF=y
-CONFIG_IIO_TRIGGER=y
-CONFIG_IIO_TRIGGERED_BUFFER=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACB=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MFD_AT91_USART=y
-CONFIG_MFD_ATMEL_FLEXCOM=y
-CONFIG_MFD_ATMEL_HLCDC=y
-CONFIG_MFD_ATMEL_SMC=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MICREL_PHY=y
-CONFIG_MICROCHIP_PIT64B=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF_AT91=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NLS=y
-CONFIG_NVMEM=y
-# CONFIG_NVMEM_MICROCHIP_OTPC is not set
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_AT91=y
-# CONFIG_PINCTRL_AT91PIO4 is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_SLEEP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_AT91_POWEROFF=y
-CONFIG_POWER_RESET_AT91_RESET=y
-CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PWM=y
-CONFIG_PWM_ATMEL=y
-CONFIG_PWM_ATMEL_HLCDC_PWM=y
-CONFIG_PWM_ATMEL_TCB=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_SAMA5D4_WATCHDOG=y
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SOC_AT91RM9200=y
-CONFIG_SOC_AT91SAM9=y
-CONFIG_SOC_BUS=y
-CONFIG_SOC_SAM9X60=y
-CONFIG_SOC_SAM_V4_V5=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_AT91_USART is not set
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_ATMEL_QUADSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWPHY=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_ACM=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_AT91 is not set
-# CONFIG_USB_ATMEL_USBA is not set
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_AT91=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_AT91=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XXHASH=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/at91/sama5/config-5.10 b/target/linux/at91/sama5/config-5.10
deleted file mode 100644
index 42db74c621a9..000000000000
--- a/target/linux/at91/sama5/config-5.10
+++ /dev/null
@@ -1,488 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_AT91_CPUIDLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_AT91_ADC=y
-CONFIG_AT91_SAMA5D2_ADC=y
-CONFIG_AT91_SOC_ID=y
-# CONFIG_AT91_SOC_SFR is not set
-CONFIG_ATMEL_AIC5_IRQ=y
-# CONFIG_ATMEL_CLOCKSOURCE_PIT is not set
-CONFIG_ATMEL_CLOCKSOURCE_TCB=y
-CONFIG_ATMEL_EBI=y
-CONFIG_ATMEL_PM=y
-CONFIG_ATMEL_SDRAMC=y
-CONFIG_ATMEL_SSC=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCLIB=y
-CONFIG_AT_HDMAC=y
-CONFIG_AT_XDMAC=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BATTERY_ACT8945A=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_AT91=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_COREDUMP=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRASH_DUMP=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DEBUG_USER=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DNOTIFY=y
-CONFIG_DRM=y
-CONFIG_DRM_ATMEL_HLCDC=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_GEM_CMA_HELPER=y
-CONFIG_DRM_KMS_CMA_HELPER=y
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_DTC=y
-CONFIG_DVB_CORE=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_ELF_CORE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FORCE_MAX_ZONEORDER=15
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_CACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HDMI=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_ATMEL=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_AT91=y
-# CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL is not set
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_IIO=y
-CONFIG_IIO_BUFFER=y
-CONFIG_IIO_KFIFO_BUF=y
-CONFIG_IIO_TRIGGER=y
-CONFIG_IIO_TRIGGERED_BUFFER=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_LEDS=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-# CONFIG_JFFS2_FS is not set
-CONFIG_KCMP=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_QT1070=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACB=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
-CONFIG_MEDIA_PLATFORM_SUPPORT=y
-CONFIG_MEDIA_RADIO_SUPPORT=y
-CONFIG_MEDIA_SDR_SUPPORT=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_TEST_SUPPORT=y
-CONFIG_MEDIA_TUNER=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_ACT8945A=y
-CONFIG_MFD_AT91_USART=y
-CONFIG_MFD_ATMEL_FLEXCOM=y
-CONFIG_MFD_ATMEL_HLCDC=y
-CONFIG_MFD_ATMEL_SMC=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF_AT91=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-# CONFIG_NEON is not set
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NVMEM=y
-# CONFIG_NVMEM_MICROCHIP_OTPC is not set
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_AT91=y
-CONFIG_PINCTRL_AT91PIO4=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_SLEEP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_AT91_POWEROFF=y
-CONFIG_POWER_RESET_AT91_RESET=y
-CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_VMCORE=y
-CONFIG_PWM=y
-CONFIG_PWM_ATMEL=y
-CONFIG_PWM_ATMEL_HLCDC_PWM=y
-CONFIG_PWM_ATMEL_TCB=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_ACT8865=y
-CONFIG_REGULATOR_ACT8945A=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_SAMA5D4_WATCHDOG=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SND=y
-CONFIG_SND_ARM=y
-# CONFIG_SND_AT73C213 is not set
-# CONFIG_SND_AT91_SOC_SAM9G20_WM8731 is not set
-# CONFIG_SND_AT91_SOC_SAM9X5_WM8731 is not set
-CONFIG_SND_ATMEL_SOC=y
-CONFIG_SND_ATMEL_SOC_CLASSD=y
-CONFIG_SND_ATMEL_SOC_DMA=y
-CONFIG_SND_ATMEL_SOC_I2S=y
-CONFIG_SND_ATMEL_SOC_PDC=y
-# CONFIG_SND_ATMEL_SOC_PDMIC is not set
-CONFIG_SND_ATMEL_SOC_SSC=y
-CONFIG_SND_ATMEL_SOC_SSC_DMA=y
-# CONFIG_SND_ATMEL_SOC_SSC_PDC is not set
-# CONFIG_SND_ATMEL_SOC_TSE850_PCM5142 is not set
-CONFIG_SND_ATMEL_SOC_WM8904=y
-# CONFIG_SND_COMPRESS_OFFLOAD is not set
-CONFIG_SND_DMAENGINE_PCM=y
-CONFIG_SND_JACK=y
-CONFIG_SND_JACK_INPUT_DEV=y
-# CONFIG_SND_MCHP_SOC_I2S_MCC is not set
-# CONFIG_SND_MCHP_SOC_SPDIFRX is not set
-# CONFIG_SND_MCHP_SOC_SPDIFTX is not set
-CONFIG_SND_PCM=y
-CONFIG_SND_PCM_TIMER=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-CONFIG_SND_SOC_MIKROE_PROTO=y
-# CONFIG_SND_SOC_PCM5102A is not set
-CONFIG_SND_SOC_WM8731=y
-CONFIG_SND_SOC_WM8904=y
-CONFIG_SND_SPI=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_TIMER=y
-CONFIG_SOC_BUS=y
-CONFIG_SOC_SAMA5=y
-CONFIG_SOC_SAMA5D2=y
-CONFIG_SOC_SAMA5D3=y
-CONFIG_SOC_SAMA5D4=y
-# CONFIG_SOC_SAMA7G5 is not set
-CONFIG_SOC_SAM_V7=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_AT91_USART is not set
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_ATMEL_QUADSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SQUASHFS is not set
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-# CONFIG_STANDALONE is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWPHY=y
-# CONFIG_SWP_EMULATE is not set
-CONFIG_SYNC_FILE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=y
-CONFIG_TOUCHSCREEN_PROPERTIES=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_ACM=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_AT91 is not set
-# CONFIG_USB_ATMEL_USBA is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_AT91=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_HID=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_AT91=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-# CONFIG_USB_PWC is not set
-CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VIDEOMODE_HELPERS=y
-# CONFIG_VIDEO_CPIA2 is not set
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L2_I2C=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XXHASH=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/at91/sama7/config-5.10 b/target/linux/at91/sama7/config-5.10
deleted file mode 100644
index dbf7914a6a84..000000000000
--- a/target/linux/at91/sama7/config-5.10
+++ /dev/null
@@ -1,396 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ALLOW_DEV_COREDUMP is not set
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_PATCH_IDIV is not set
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-# CONFIG_AT91SAM9X_WATCHDOG is not set
-# CONFIG_AT91_ADC is not set
-CONFIG_AT91_SAMA5D2_ADC=y
-CONFIG_AT91_SOC_ID=y
-# CONFIG_AT91_SOC_SFR is not set
-CONFIG_ATMEL_CLOCKSOURCE_TCB=y
-# CONFIG_ATMEL_EBI is not set
-CONFIG_ATMEL_SDRAMC=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-# CONFIG_ATMEL_TCLIB is not set
-# CONFIG_AT_HDMAC is not set
-CONFIG_AT_XDMAC=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_SCSI_REQUEST=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CAN=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=9
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=256
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk nocache ignore_loglevel"
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_AT91=y
-# CONFIG_COMPACTION is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_SPECTRE=y
-# CONFIG_CPU_SW_DOMAIN_PAN is not set
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CMAC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ECC=y
-CONFIG_CRYPTO_ECDH=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_AT91_SAMA7G5_FLEXCOM3=y
-CONFIG_DEBUG_AT91_UART=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/at91.S"
-CONFIG_DEBUG_UART_PHYS=0xe1824200
-CONFIG_DEBUG_UART_VIRT=0xe0824200
-# CONFIG_DEBUG_UNCOMPRESS is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMADEVICES=y
-CONFIG_DMATEST=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-# CONFIG_EFI_PARTITION is not set
-CONFIG_EXT4_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_FAT_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FORCE_MAX_ZONEORDER=15
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GRACE_PERIOD=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_AT91=y
-# CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL is not set
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_IIO=y
-CONFIG_IIO_BUFFER=y
-CONFIG_IIO_CONFIGFS=y
-# CONFIG_IIO_HRTIMER_TRIGGER is not set
-CONFIG_IIO_KFIFO_BUF=y
-CONFIG_IIO_SW_TRIGGER=y
-# CONFIG_IIO_TIGHTLOOP_TRIGGER is not set
-CONFIG_IIO_TRIGGER=y
-CONFIG_IIO_TRIGGERED_BUFFER=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_BOOTP is not set
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCKD=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_LSM="N"
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACB=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_MEDIA_PLATFORM_SUPPORT=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_SUPPORT_FILTER=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
-CONFIG_MFD_AT91_USART=y
-CONFIG_MFD_ATMEL_FLEXCOM=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MICREL_PHY=y
-CONFIG_MICROCHIP_PIT64B=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-# CONFIG_MMC_ATMELMCI is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF_AT91=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEON=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NFS_FS=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NVMEM=y
-# CONFIG_NVMEM_MICROCHIP_OTPC is not set
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCCARD=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_AT91=y
-CONFIG_PINCTRL_AT91PIO4=y
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-# CONFIG_POWER_RESET_AT91_POWEROFF is not set
-CONFIG_POWER_RESET_AT91_RESET=y
-CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_PRINTK_TIME=y
-CONFIG_PWM=y
-CONFIG_PWM_ATMEL=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_MCP16502=y
-CONFIG_ROOT_NFS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-# CONFIG_RUNTIME_TESTING_MENU is not set
-CONFIG_SAMA5D4_WATCHDOG=y
-CONFIG_SCSI=y
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SND=y
-CONFIG_SND_ATMEL_SOC=y
-# CONFIG_SND_ATMEL_SOC_CLASSD is not set
-# CONFIG_SND_ATMEL_SOC_I2S is not set
-# CONFIG_SND_ATMEL_SOC_PDMIC is not set
-# CONFIG_SND_COMPRESS_OFFLOAD is not set
-CONFIG_SND_DMAENGINE_PCM=y
-CONFIG_SND_JACK=y
-CONFIG_SND_JACK_INPUT_DEV=y
-CONFIG_SND_MCHP_SOC_I2S_MCC=y
-CONFIG_SND_MCHP_SOC_SPDIFRX=y
-CONFIG_SND_MCHP_SOC_SPDIFTX=y
-CONFIG_SND_PCM=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_SIMPLE_CARD_UTILS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_MIKROE_PROTO is not set
-CONFIG_SND_SOC_PCM5102A=y
-CONFIG_SND_SOC_SPDIF=y
-CONFIG_SOC_BUS=y
-# CONFIG_SOC_SAMA5D2 is not set
-# CONFIG_SOC_SAMA5D3 is not set
-# CONFIG_SOC_SAMA5D4 is not set
-CONFIG_SOC_SAMA7=y
-CONFIG_SOC_SAMA7G5=y
-CONFIG_SOC_SAM_V7=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_AT91_USART is not set
-CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_ATMEL_QUADSPI is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-CONFIG_STACKTRACE=y
-# CONFIG_STANDALONE is not set
-CONFIG_SUNRPC=y
-# CONFIG_SWAP is not set
-CONFIG_SWPHY=y
-# CONFIG_SWP_EMULATE is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USE_OF=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_VIDEO_ATMEL_XISC is not set
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L2_I2C=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/ath25/config-5.10 b/target/linux/ath25/config-5.10
deleted file mode 100644
index ef764820e45d..000000000000
--- a/target/linux/ath25/config-5.10
+++ /dev/null
@@ -1,128 +0,0 @@
-CONFIG_ADM6996_PHY=y
-CONFIG_AR2315_WDT=y
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATH25=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_COMMON_CLK is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FORCE_PCI=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIO_AR2315=y
-CONFIG_GPIO_AR5312=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_MIPS_EBPF_JIT=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_AR2315=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MVSWITCH_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_AR231X=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_OF is not set
-CONFIG_PCI=y
-CONFIG_PCI_AR2315=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SOC_AR2315=y
-CONFIG_SOC_AR5312=y
-CONFIG_SRCU=y
-# CONFIG_SWAP is not set
-CONFIG_SWCONFIG=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_TARGET_ISA_REV=1
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
diff --git a/target/linux/ath25/patches-5.10/107-ar5312_gpio.patch b/target/linux/ath25/patches-5.10/107-ar5312_gpio.patch
deleted file mode 100644
index a1efdbeeae14..000000000000
--- a/target/linux/ath25/patches-5.10/107-ar5312_gpio.patch
+++ /dev/null
@@ -1,212 +0,0 @@
---- a/arch/mips/ath25/Kconfig
-+++ b/arch/mips/ath25/Kconfig
-@@ -2,6 +2,7 @@
- config SOC_AR5312
- 	bool "Atheros AR5312/AR2312+ SoC support"
- 	depends on ATH25
-+	select GPIO_AR5312
- 	default y
- 
- config SOC_AR2315
---- a/arch/mips/ath25/ar5312.c
-+++ b/arch/mips/ath25/ar5312.c
-@@ -23,6 +23,7 @@
- #include <linux/platform_device.h>
- #include <linux/mtd/physmap.h>
- #include <linux/reboot.h>
-+#include <linux/gpio.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-@@ -178,6 +179,22 @@ static struct platform_device ar5312_phy
- 	.num_resources = 1,
- };
- 
-+static struct resource ar5312_gpio_res[] = {
-+	{
-+		.name = "ar5312-gpio",
-+		.flags = IORESOURCE_MEM,
-+		.start = AR5312_GPIO_BASE,
-+		.end = AR5312_GPIO_BASE + AR5312_GPIO_SIZE - 1,
-+	},
-+};
-+
-+static struct platform_device ar5312_gpio = {
-+	.name = "ar5312-gpio",
-+	.id = -1,
-+	.resource = ar5312_gpio_res,
-+	.num_resources = ARRAY_SIZE(ar5312_gpio_res),
-+};
-+
- static void __init ar5312_flash_init(void)
- {
- 	void __iomem *flashctl_base;
-@@ -245,6 +262,8 @@ void __init ar5312_init_devices(void)
- 
- 	platform_device_register(&ar5312_physmap_flash);
- 
-+	platform_device_register(&ar5312_gpio);
-+
- 	switch (ath25_soc) {
- 	case ATH25_SOC_AR5312:
- 		if (!ath25_board.radio)
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -142,6 +142,13 @@ config GPIO_AMDPT
- 	  driver for GPIO functionality on Promontory IOHub
- 	  Require ACPI ASL code to enumerate as a platform device.
- 
-+config GPIO_AR5312
-+	bool "AR5312 SoC GPIO support"
-+	default y if SOC_AR5312
-+	depends on SOC_AR5312
-+	help
-+	  Say yes here to enable GPIO support for Atheros AR5312/AR2312+ SoCs.
-+
- config GPIO_ASPEED
- 	tristate "Aspeed GPIO support"
- 	depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_GPIO_ALTERA)  		+= gpio-alt
- obj-$(CONFIG_GPIO_AMD8111)		+= gpio-amd8111.o
- obj-$(CONFIG_GPIO_AMD_FCH)		+= gpio-amd-fch.o
- obj-$(CONFIG_GPIO_AMDPT)		+= gpio-amdpt.o
-+obj-$(CONFIG_GPIO_AR5312)		+= gpio-ar5312.o
- obj-$(CONFIG_GPIO_ARIZONA)		+= gpio-arizona.o
- obj-$(CONFIG_GPIO_ASPEED)		+= gpio-aspeed.o
- obj-$(CONFIG_GPIO_ASPEED_SGPIO)		+= gpio-aspeed-sgpio.o
---- /dev/null
-+++ b/drivers/gpio/gpio-ar5312.c
-@@ -0,0 +1,121 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
-+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+
-+#define DRIVER_NAME	"ar5312-gpio"
-+
-+#define AR5312_GPIO_DO		0x00		/* output register */
-+#define AR5312_GPIO_DI		0x04		/* intput register */
-+#define AR5312_GPIO_CR		0x08		/* control register */
-+
-+#define AR5312_GPIO_CR_M(x)	(1 << (x))	/* mask for i/o */
-+#define AR5312_GPIO_CR_O(x)	(0 << (x))	/* mask for output */
-+#define AR5312_GPIO_CR_I(x)	(1 << (x))	/* mask for input */
-+#define AR5312_GPIO_CR_INT(x)	(1 << ((x)+8))	/* mask for interrupt */
-+#define AR5312_GPIO_CR_UART(x)	(1 << ((x)+16))	/* uart multiplex */
-+
-+#define AR5312_GPIO_NUM		8
-+
-+static void __iomem *ar5312_mem;
-+
-+static inline u32 ar5312_gpio_reg_read(unsigned reg)
-+{
-+	return __raw_readl(ar5312_mem + reg);
-+}
-+
-+static inline void ar5312_gpio_reg_write(unsigned reg, u32 val)
-+{
-+	__raw_writel(val, ar5312_mem + reg);
-+}
-+
-+static inline void ar5312_gpio_reg_mask(unsigned reg, u32 mask, u32 val)
-+{
-+	ar5312_gpio_reg_write(reg, (ar5312_gpio_reg_read(reg) & ~mask) | val);
-+}
-+
-+static int ar5312_gpio_get_val(struct gpio_chip *chip, unsigned gpio)
-+{
-+	return (ar5312_gpio_reg_read(AR5312_GPIO_DI) >> gpio) & 1;
-+}
-+
-+static void ar5312_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val)
-+{
-+	u32 reg = ar5312_gpio_reg_read(AR5312_GPIO_DO);
-+
-+	reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio);
-+	ar5312_gpio_reg_write(AR5312_GPIO_DO, reg);
-+}
-+
-+static int ar5312_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
-+{
-+	ar5312_gpio_reg_mask(AR5312_GPIO_CR, 0, 1 << gpio);
-+	return 0;
-+}
-+
-+static int ar5312_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val)
-+{
-+	ar5312_gpio_reg_mask(AR5312_GPIO_CR, 1 << gpio, 0);
-+	ar5312_gpio_set_val(chip, gpio, val);
-+	return 0;
-+}
-+
-+static struct gpio_chip ar5312_gpio_chip = {
-+	.label			= DRIVER_NAME,
-+	.direction_input	= ar5312_gpio_dir_in,
-+	.direction_output	= ar5312_gpio_dir_out,
-+	.set			= ar5312_gpio_set_val,
-+	.get			= ar5312_gpio_get_val,
-+	.base			= 0,
-+	.ngpio			= AR5312_GPIO_NUM,
-+};
-+
-+static int ar5312_gpio_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct resource *res;
-+	int ret;
-+
-+	if (ar5312_mem)
-+		return -EBUSY;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	ar5312_mem = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(ar5312_mem))
-+		return PTR_ERR(ar5312_mem);
-+
-+	ar5312_gpio_chip.parent = dev;
-+	ret = gpiochip_add(&ar5312_gpio_chip);
-+	if (ret) {
-+		dev_err(dev, "failed to add gpiochip\n");
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static struct platform_driver ar5312_gpio_driver = {
-+	.probe = ar5312_gpio_probe,
-+	.driver = {
-+		.name = DRIVER_NAME,
-+		.owner = THIS_MODULE,
-+	}
-+};
-+
-+static int __init ar5312_gpio_init(void)
-+{
-+	return platform_driver_register(&ar5312_gpio_driver);
-+}
-+subsys_initcall(ar5312_gpio_init);
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -219,6 +219,7 @@ config ATH25
- 	select CEVT_R4K
- 	select CSRC_R4K
- 	select DMA_NONCOHERENT
-+	select GPIOLIB
- 	select IRQ_MIPS_CPU
- 	select IRQ_DOMAIN
- 	select SYS_HAS_CPU_MIPS32_R1
diff --git a/target/linux/ath25/patches-5.10/108-ar2315_gpio.patch b/target/linux/ath25/patches-5.10/108-ar2315_gpio.patch
deleted file mode 100644
index 10289086e8d7..000000000000
--- a/target/linux/ath25/patches-5.10/108-ar2315_gpio.patch
+++ /dev/null
@@ -1,363 +0,0 @@
---- a/arch/mips/ath25/Kconfig
-+++ b/arch/mips/ath25/Kconfig
-@@ -8,6 +8,7 @@ config SOC_AR5312
- config SOC_AR2315
- 	bool "Atheros AR2315+ SoC support"
- 	depends on ATH25
-+	select GPIO_AR2315
- 	default y
- 
- config PCI_AR2315
---- a/arch/mips/ath25/ar2315.c
-+++ b/arch/mips/ath25/ar2315.c
-@@ -22,6 +22,8 @@
- #include <linux/memblock.h>
- #include <linux/platform_device.h>
- #include <linux/reboot.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-@@ -165,11 +167,42 @@ void __init ar2315_arch_init_irq(void)
- 	ar2315_misc_irq_domain = domain;
- }
- 
-+static struct resource ar2315_gpio_res[] = {
-+	{
-+		.name = "ar2315-gpio",
-+		.flags = IORESOURCE_MEM,
-+		.start = AR2315_RST_BASE + AR2315_GPIO,
-+		.end = AR2315_RST_BASE + AR2315_GPIO + 0x10 - 1,
-+	},
-+	{
-+		.name = "ar2315-gpio",
-+		.flags = IORESOURCE_IRQ,
-+	},
-+	{
-+		.name = "ar2315-gpio-irq-base",
-+		.flags = IORESOURCE_IRQ,
-+		.start = AR231X_GPIO_IRQ_BASE,
-+		.end = AR231X_GPIO_IRQ_BASE,
-+	}
-+};
-+
-+static struct platform_device ar2315_gpio = {
-+	.id = -1,
-+	.name = "ar2315-gpio",
-+	.resource = ar2315_gpio_res,
-+	.num_resources = ARRAY_SIZE(ar2315_gpio_res)
-+};
-+
- void __init ar2315_init_devices(void)
- {
- 	/* Find board configuration */
- 	ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE);
- 
-+	ar2315_gpio_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
-+						      AR2315_MISC_IRQ_GPIO);
-+	ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
-+	platform_device_register(&ar2315_gpio);
-+
- 	ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0);
- }
- 
-@@ -185,8 +218,8 @@ static void ar2315_restart(char *command
- 	/* Cold reset does not work on the AR2315/6, use the GPIO reset bits
- 	 * a workaround. Give it some time to attempt a gpio based hardware
- 	 * reset (atheros reference design workaround) */
--
--	/* TODO: implement the GPIO reset workaround */
-+	gpio_request_one(AR2315_RESET_GPIO, GPIOF_OUT_INIT_LOW, "Reset");
-+	mdelay(100);
- 
- 	/* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
- 	 * workaround. Attempt to jump to the mips reset location -
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -142,6 +142,13 @@ config GPIO_AMDPT
- 	  driver for GPIO functionality on Promontory IOHub
- 	  Require ACPI ASL code to enumerate as a platform device.
- 
-+config GPIO_AR2315
-+	bool "AR2315 SoC GPIO support"
-+	default y if SOC_AR2315
-+	depends on SOC_AR2315
-+	help
-+	  Say yes here to enable GPIO support for Atheros AR2315+ SoCs.
-+
- config GPIO_AR5312
- 	bool "AR5312 SoC GPIO support"
- 	default y if SOC_AR5312
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_GPIO_ALTERA)  		+= gpio-alt
- obj-$(CONFIG_GPIO_AMD8111)		+= gpio-amd8111.o
- obj-$(CONFIG_GPIO_AMD_FCH)		+= gpio-amd-fch.o
- obj-$(CONFIG_GPIO_AMDPT)		+= gpio-amdpt.o
-+obj-$(CONFIG_GPIO_AR2315)		+= gpio-ar2315.o
- obj-$(CONFIG_GPIO_AR5312)		+= gpio-ar5312.o
- obj-$(CONFIG_GPIO_ARIZONA)		+= gpio-arizona.o
- obj-$(CONFIG_GPIO_ASPEED)		+= gpio-aspeed.o
---- /dev/null
-+++ b/drivers/gpio/gpio-ar2315.c
-@@ -0,0 +1,233 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@nbd.name>
-+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+#include <linux/irq.h>
-+
-+#define DRIVER_NAME	"ar2315-gpio"
-+
-+#define AR2315_GPIO_DI			0x0000
-+#define AR2315_GPIO_DO			0x0008
-+#define AR2315_GPIO_DIR			0x0010
-+#define AR2315_GPIO_INT			0x0018
-+
-+#define AR2315_GPIO_DIR_M(x)		(1 << (x))	/* mask for i/o */
-+#define AR2315_GPIO_DIR_O(x)		(1 << (x))	/* output */
-+#define AR2315_GPIO_DIR_I(x)		(0)		/* input */
-+
-+#define AR2315_GPIO_INT_NUM_M		0x3F		/* mask for GPIO num */
-+#define AR2315_GPIO_INT_TRIG(x)		((x) << 6)	/* interrupt trigger */
-+#define AR2315_GPIO_INT_TRIG_M		(0x3 << 6)	/* mask for int trig */
-+
-+#define AR2315_GPIO_INT_TRIG_OFF	0	/* Triggerring off */
-+#define AR2315_GPIO_INT_TRIG_LOW	1	/* Low Level Triggered */
-+#define AR2315_GPIO_INT_TRIG_HIGH	2	/* High Level Triggered */
-+#define AR2315_GPIO_INT_TRIG_EDGE	3	/* Edge Triggered */
-+
-+#define AR2315_GPIO_NUM		22
-+
-+static u32 ar2315_gpio_intmask;
-+static u32 ar2315_gpio_intval;
-+static unsigned ar2315_gpio_irq_base;
-+static void __iomem *ar2315_mem;
-+
-+static inline u32 ar2315_gpio_reg_read(unsigned reg)
-+{
-+	return __raw_readl(ar2315_mem + reg);
-+}
-+
-+static inline void ar2315_gpio_reg_write(unsigned reg, u32 val)
-+{
-+	__raw_writel(val, ar2315_mem + reg);
-+}
-+
-+static inline void ar2315_gpio_reg_mask(unsigned reg, u32 mask, u32 val)
-+{
-+	ar2315_gpio_reg_write(reg, (ar2315_gpio_reg_read(reg) & ~mask) | val);
-+}
-+
-+static void ar2315_gpio_irq_handler(struct irq_desc *desc)
-+{
-+	u32 pend;
-+	int bit = -1;
-+
-+	/* only do one gpio interrupt at a time */
-+	pend = ar2315_gpio_reg_read(AR2315_GPIO_DI);
-+	pend ^= ar2315_gpio_intval;
-+	pend &= ar2315_gpio_intmask;
-+
-+	if (pend) {
-+		bit = fls(pend) - 1;
-+		pend &= ~(1 << bit);
-+		ar2315_gpio_intval ^= (1 << bit);
-+	}
-+
-+	/* Enable interrupt with edge detection */
-+	if ((ar2315_gpio_reg_read(AR2315_GPIO_DIR) & AR2315_GPIO_DIR_M(bit)) !=
-+	    AR2315_GPIO_DIR_I(bit))
-+		return;
-+
-+	if (bit >= 0)
-+		generic_handle_irq(ar2315_gpio_irq_base + bit);
-+}
-+
-+static void ar2315_gpio_int_setup(unsigned gpio, int trig)
-+{
-+	u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_INT);
-+
-+	reg &= ~(AR2315_GPIO_INT_NUM_M | AR2315_GPIO_INT_TRIG_M);
-+	reg |= gpio | AR2315_GPIO_INT_TRIG(trig);
-+	ar2315_gpio_reg_write(AR2315_GPIO_INT, reg);
-+}
-+
-+static void ar2315_gpio_irq_unmask(struct irq_data *d)
-+{
-+	unsigned gpio = d->irq - ar2315_gpio_irq_base;
-+	u32 dir = ar2315_gpio_reg_read(AR2315_GPIO_DIR);
-+
-+	/* Enable interrupt with edge detection */
-+	if ((dir & AR2315_GPIO_DIR_M(gpio)) != AR2315_GPIO_DIR_I(gpio))
-+		return;
-+
-+	ar2315_gpio_intmask |= (1 << gpio);
-+	ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_EDGE);
-+}
-+
-+static void ar2315_gpio_irq_mask(struct irq_data *d)
-+{
-+	unsigned gpio = d->irq - ar2315_gpio_irq_base;
-+
-+	/* Disable interrupt */
-+	ar2315_gpio_intmask &= ~(1 << gpio);
-+	ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_OFF);
-+}
-+
-+static struct irq_chip ar2315_gpio_irq_chip = {
-+	.name		= DRIVER_NAME,
-+	.irq_unmask	= ar2315_gpio_irq_unmask,
-+	.irq_mask	= ar2315_gpio_irq_mask,
-+};
-+
-+static void ar2315_gpio_irq_init(unsigned irq)
-+{
-+	unsigned i;
-+
-+	ar2315_gpio_intval = ar2315_gpio_reg_read(AR2315_GPIO_DI);
-+	for (i = 0; i < AR2315_GPIO_NUM; i++) {
-+		unsigned _irq = ar2315_gpio_irq_base + i;
-+
-+		irq_set_chip_and_handler(_irq, &ar2315_gpio_irq_chip,
-+					 handle_level_irq);
-+	}
-+	irq_set_chained_handler(irq, ar2315_gpio_irq_handler);
-+}
-+
-+static int ar2315_gpio_get_val(struct gpio_chip *chip, unsigned gpio)
-+{
-+	return (ar2315_gpio_reg_read(AR2315_GPIO_DI) >> gpio) & 1;
-+}
-+
-+static void ar2315_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val)
-+{
-+	u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_DO);
-+
-+	reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio);
-+	ar2315_gpio_reg_write(AR2315_GPIO_DO, reg);
-+}
-+
-+static int ar2315_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
-+{
-+	ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 1 << gpio, 0);
-+	return 0;
-+}
-+
-+static int ar2315_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val)
-+{
-+	ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 0, 1 << gpio);
-+	ar2315_gpio_set_val(chip, gpio, val);
-+	return 0;
-+}
-+
-+static int ar2315_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+	return ar2315_gpio_irq_base + gpio;
-+}
-+
-+static struct gpio_chip ar2315_gpio_chip = {
-+	.label			= DRIVER_NAME,
-+	.direction_input	= ar2315_gpio_dir_in,
-+	.direction_output	= ar2315_gpio_dir_out,
-+	.set			= ar2315_gpio_set_val,
-+	.get			= ar2315_gpio_get_val,
-+	.to_irq			= ar2315_gpio_to_irq,
-+	.base			= 0,
-+	.ngpio			= AR2315_GPIO_NUM,
-+};
-+
-+static int ar2315_gpio_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct resource *res;
-+	unsigned irq;
-+	int ret;
-+
-+	if (ar2315_mem)
-+		return -EBUSY;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
-+					   "ar2315-gpio-irq-base");
-+	if (!res) {
-+		dev_err(dev, "not found GPIO IRQ base\n");
-+		return -ENXIO;
-+	}
-+	ar2315_gpio_irq_base = res->start;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, DRIVER_NAME);
-+	if (!res) {
-+		dev_err(dev, "not found IRQ number\n");
-+		return -ENXIO;
-+	}
-+	irq = res->start;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, DRIVER_NAME);
-+	ar2315_mem = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(ar2315_mem))
-+		return PTR_ERR(ar2315_mem);
-+
-+	ar2315_gpio_chip.parent = dev;
-+	ret = gpiochip_add(&ar2315_gpio_chip);
-+	if (ret) {
-+		dev_err(dev, "failed to add gpiochip\n");
-+		return ret;
-+	}
-+
-+	ar2315_gpio_irq_init(irq);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver ar2315_gpio_driver = {
-+	.probe = ar2315_gpio_probe,
-+	.driver = {
-+		.name = DRIVER_NAME,
-+		.owner = THIS_MODULE,
-+	}
-+};
-+
-+static int __init ar2315_gpio_init(void)
-+{
-+	return platform_driver_register(&ar2315_gpio_driver);
-+}
-+subsys_initcall(ar2315_gpio_init);
---- a/arch/mips/ath25/devices.h
-+++ b/arch/mips/ath25/devices.h
-@@ -4,6 +4,11 @@
- 
- #include <linux/cpu.h>
- 
-+#define AR231X_GPIO_IRQ_BASE		0x30
-+
-+/* GPIO number for AR2315/16 reset issue workaround */
-+#define AR2315_RESET_GPIO		5
-+
- #define ATH25_REG_MS(_val, _field)	(((_val) & _field##_M) >> _field##_S)
- 
- #define ATH25_IRQ_CPU_CLOCK	(MIPS_CPU_IRQ_BASE + 7)	/* C0_CAUSE: 0x8000 */
---- a/arch/mips/ath25/ar2315_regs.h
-+++ b/arch/mips/ath25/ar2315_regs.h
-@@ -315,6 +315,9 @@
- #define AR2315_MEM_CFG_BANKADDR_BITS_M	0x00000018
- #define AR2315_MEM_CFG_BANKADDR_BITS_S	3
- 
-+/* GPIO MMR base address */
-+#define AR2315_GPIO			0x0088
-+
- /*
-  * Local Bus Interface Registers
-  */
diff --git a/target/linux/ath25/patches-5.10/110-ar2313_ethernet.patch b/target/linux/ath25/patches-5.10/110-ar2313_ethernet.patch
deleted file mode 100644
index 72b8660baa6b..000000000000
--- a/target/linux/ath25/patches-5.10/110-ar2313_ethernet.patch
+++ /dev/null
@@ -1,1735 +0,0 @@
---- a/drivers/net/ethernet/atheros/Makefile
-+++ b/drivers/net/ethernet/atheros/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_ATL2) += atlx/
- obj-$(CONFIG_ATL1E) += atl1e/
- obj-$(CONFIG_ATL1C) += atl1c/
- obj-$(CONFIG_ALX) += alx/
-+obj-$(CONFIG_NET_AR231X) += ar231x/
---- a/drivers/net/ethernet/atheros/Kconfig
-+++ b/drivers/net/ethernet/atheros/Kconfig
-@@ -6,7 +6,7 @@
- config NET_VENDOR_ATHEROS
- 	bool "Atheros devices"
- 	default y
--	depends on (PCI || ATH79)
-+	depends on (PCI || ATH25 || ATH79)
- 	help
- 	  If you have a network (Ethernet) card belonging to this class, say Y.
- 
-@@ -87,4 +87,10 @@ config ALX
- 	  To compile this driver as a module, choose M here.  The module
- 	  will be called alx.
- 
-+config NET_AR231X
-+	tristate "Atheros AR231X built-in Ethernet support"
-+	depends on ATH25
-+	help
-+	  Support for the AR231x/531x ethernet controller
-+
- endif # NET_VENDOR_ATHEROS
---- /dev/null
-+++ b/drivers/net/ethernet/atheros/ar231x/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_NET_AR231X) += ar231x.o
---- /dev/null
-+++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c
-@@ -0,0 +1,1119 @@
-+/*
-+ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Additional credits:
-+ * This code is taken from John Taylor's Sibyte driver and then
-+ * modified for the AR2313.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/interrupt.h>
-+#include <linux/skbuff.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <linux/mii.h>
-+#include <linux/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+
-+#define AR2313_MTU                     1692
-+#define AR2313_PRIOS                   1
-+#define AR2313_QUEUES                  (2*AR2313_PRIOS)
-+#define AR2313_DESCR_ENTRIES           64
-+
-+#ifndef min
-+#define min(a, b)	(((a) < (b)) ? (a) : (b))
-+#endif
-+
-+#ifndef SMP_CACHE_BYTES
-+#define SMP_CACHE_BYTES	L1_CACHE_BYTES
-+#endif
-+
-+#define AR2313_MBOX_SET_BIT  0x8
-+
-+#include "ar231x.h"
-+
-+/**
-+ * New interrupt handler strategy:
-+ *
-+ * An old interrupt handler worked using the traditional method of
-+ * replacing an skbuff with a new one when a packet arrives. However
-+ * the rx rings do not need to contain a static number of buffer
-+ * descriptors, thus it makes sense to move the memory allocation out
-+ * of the main interrupt handler and do it in a bottom half handler
-+ * and only allocate new buffers when the number of buffers in the
-+ * ring is below a certain threshold. In order to avoid starving the
-+ * NIC under heavy load it is however necessary to force allocation
-+ * when hitting a minimum threshold. The strategy for alloction is as
-+ * follows:
-+ *
-+ *     RX_LOW_BUF_THRES    - allocate buffers in the bottom half
-+ *     RX_PANIC_LOW_THRES  - we are very low on buffers, allocate
-+ *                           the buffers in the interrupt handler
-+ *     RX_RING_THRES       - maximum number of buffers in the rx ring
-+ *
-+ * One advantagous side effect of this allocation approach is that the
-+ * entire rx processing can be done without holding any spin lock
-+ * since the rx rings and registers are totally independent of the tx
-+ * ring and its registers.  This of course includes the kmalloc's of
-+ * new skb's. Thus start_xmit can run in parallel with rx processing
-+ * and the memory allocation on SMP systems.
-+ *
-+ * Note that running the skb reallocation in a bottom half opens up
-+ * another can of races which needs to be handled properly. In
-+ * particular it can happen that the interrupt handler tries to run
-+ * the reallocation while the bottom half is either running on another
-+ * CPU or was interrupted on the same CPU. To get around this the
-+ * driver uses bitops to prevent the reallocation routines from being
-+ * reentered.
-+ *
-+ * TX handling can also be done without holding any spin lock, wheee
-+ * this is fun! since tx_csm is only written to by the interrupt
-+ * handler.
-+ */
-+
-+/**
-+ * Threshold values for RX buffer allocation - the low water marks for
-+ * when to start refilling the rings are set to 75% of the ring
-+ * sizes. It seems to make sense to refill the rings entirely from the
-+ * intrrupt handler once it gets below the panic threshold, that way
-+ * we don't risk that the refilling is moved to another CPU when the
-+ * one running the interrupt handler just got the slab code hot in its
-+ * cache.
-+ */
-+#define RX_RING_SIZE		AR2313_DESCR_ENTRIES
-+#define RX_PANIC_THRES	        (RX_RING_SIZE/4)
-+#define RX_LOW_THRES	        ((3*RX_RING_SIZE)/4)
-+#define CRC_LEN                 4
-+#define RX_OFFSET               2
-+
-+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-+#define VLAN_HDR                4
-+#else
-+#define VLAN_HDR                0
-+#endif
-+
-+#define AR2313_BUFSIZE		(AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + \
-+				 RX_OFFSET)
-+
-+#ifdef MODULE
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@nbd.name>");
-+MODULE_DESCRIPTION("AR231x Ethernet driver");
-+#endif
-+
-+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-+
-+/* prototypes */
-+static void ar231x_halt(struct net_device *dev);
-+static void rx_tasklet_func(unsigned long data);
-+static void rx_tasklet_cleanup(struct net_device *dev);
-+static void ar231x_multicast_list(struct net_device *dev);
-+static void ar231x_tx_timeout(struct net_device *dev, unsigned int txqueue);
-+
-+static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
-+static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
-+				u16 value);
-+static int ar231x_mdiobus_reset(struct mii_bus *bus);
-+static int ar231x_mdiobus_probe(struct net_device *dev);
-+static void ar231x_adjust_link(struct net_device *dev);
-+
-+#ifndef ERR
-+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-+#endif
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void
-+ar231x_netpoll(struct net_device *dev)
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+	ar231x_interrupt(dev->irq, dev);
-+	local_irq_restore(flags);
-+}
-+#endif
-+
-+static const struct net_device_ops ar231x_ops = {
-+	.ndo_open		= ar231x_open,
-+	.ndo_stop		= ar231x_close,
-+	.ndo_start_xmit		= ar231x_start_xmit,
-+	.ndo_set_rx_mode	= ar231x_multicast_list,
-+	.ndo_do_ioctl		= ar231x_ioctl,
-+	.ndo_validate_addr	= eth_validate_addr,
-+	.ndo_set_mac_address	= eth_mac_addr,
-+	.ndo_tx_timeout		= ar231x_tx_timeout,
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+	.ndo_poll_controller	= ar231x_netpoll,
-+#endif
-+};
-+
-+static int ar231x_probe(struct platform_device *pdev)
-+{
-+	struct net_device *dev;
-+	struct ar231x_private *sp;
-+	struct resource *res;
-+	unsigned long ar_eth_base;
-+	char buf[64];
-+
-+	dev = alloc_etherdev(sizeof(struct ar231x_private));
-+
-+	if (dev == NULL) {
-+		printk(KERN_ERR
-+			   "ar231x: Unable to allocate net_device structure!\n");
-+		return -ENOMEM;
-+	}
-+
-+	platform_set_drvdata(pdev, dev);
-+
-+	SET_NETDEV_DEV(dev, &pdev->dev);
-+
-+	sp = netdev_priv(dev);
-+	sp->dev = dev;
-+	sp->pdev = pdev;
-+	sp->cfg = pdev->dev.platform_data;
-+
-+	sprintf(buf, "eth%d_membase", pdev->id);
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
-+	if (!res)
-+		return -ENODEV;
-+
-+	sp->link = 0;
-+	ar_eth_base = res->start;
-+
-+	sprintf(buf, "eth%d_irq", pdev->id);
-+	dev->irq = platform_get_irq_byname(pdev, buf);
-+
-+	spin_lock_init(&sp->lock);
-+
-+	dev->features |= NETIF_F_HIGHDMA;
-+	dev->netdev_ops = &ar231x_ops;
-+
-+	tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long)dev);
-+	tasklet_disable(&sp->rx_tasklet);
-+
-+	sp->eth_regs = ioremap(ar_eth_base, sizeof(*sp->eth_regs));
-+	if (!sp->eth_regs) {
-+		printk("Can't remap eth registers\n");
-+		return -ENXIO;
-+	}
-+
-+	/**
-+	 * When there's only one MAC, PHY regs are typically on ENET0,
-+	 * even though the MAC might be on ENET1.
-+	 * So remap PHY regs separately.
-+	 */
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eth0_mii");
-+	if (!res) {
-+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+						   "eth1_mii");
-+		if (!res)
-+			return -ENODEV;
-+	}
-+	sp->phy_regs = ioremap(res->start, resource_size(res));
-+	if (!sp->phy_regs) {
-+		printk("Can't remap phy registers\n");
-+		return -ENXIO;
-+	}
-+
-+	sp->dma_regs = ioremap(ar_eth_base + 0x1000,
-+			       sizeof(*sp->dma_regs));
-+	if (!sp->dma_regs) {
-+		printk("Can't remap DMA registers\n");
-+		return -ENXIO;
-+	}
-+	dev->base_addr = ar_eth_base + 0x1000;
-+
-+	strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
-+	sp->name[sizeof(sp->name) - 1] = '\0';
-+	memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
-+
-+	if (ar231x_init(dev)) {
-+		/* ar231x_init() calls ar231x_init_cleanup() on error */
-+		kfree(dev);
-+		return -ENODEV;
-+	}
-+
-+	if (register_netdev(dev)) {
-+		printk("%s: register_netdev failed\n", __func__);
-+		return -1;
-+	}
-+
-+	printk("%s: %s: %pM, irq %d\n", dev->name, sp->name, dev->dev_addr,
-+	       dev->irq);
-+
-+	sp->mii_bus = mdiobus_alloc();
-+	if (sp->mii_bus == NULL)
-+		return -1;
-+
-+	sp->mii_bus->priv = dev;
-+	sp->mii_bus->read = ar231x_mdiobus_read;
-+	sp->mii_bus->write = ar231x_mdiobus_write;
-+	sp->mii_bus->reset = ar231x_mdiobus_reset;
-+	sp->mii_bus->name = "ar231x_eth_mii";
-+	snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
-+
-+	mdiobus_register(sp->mii_bus);
-+
-+	if (ar231x_mdiobus_probe(dev) != 0) {
-+		printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
-+		rx_tasklet_cleanup(dev);
-+		ar231x_init_cleanup(dev);
-+		unregister_netdev(dev);
-+		kfree(dev);
-+		return -ENODEV;
-+	}
-+
-+	return 0;
-+}
-+
-+static void ar231x_multicast_list(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	unsigned int filter;
-+
-+	filter = sp->eth_regs->mac_control;
-+
-+	if (dev->flags & IFF_PROMISC)
-+		filter |= MAC_CONTROL_PR;
-+	else
-+		filter &= ~MAC_CONTROL_PR;
-+	if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 0))
-+		filter |= MAC_CONTROL_PM;
-+	else
-+		filter &= ~MAC_CONTROL_PM;
-+
-+	sp->eth_regs->mac_control = filter;
-+}
-+
-+static void rx_tasklet_cleanup(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+
-+	/**
-+	 * Tasklet may be scheduled. Need to get it removed from the list
-+	 * since we're about to free the struct.
-+	 */
-+
-+	sp->unloading = 1;
-+	tasklet_enable(&sp->rx_tasklet);
-+	tasklet_kill(&sp->rx_tasklet);
-+}
-+
-+static int ar231x_remove(struct platform_device *pdev)
-+{
-+	struct net_device *dev = platform_get_drvdata(pdev);
-+	struct ar231x_private *sp = netdev_priv(dev);
-+
-+	rx_tasklet_cleanup(dev);
-+	ar231x_init_cleanup(dev);
-+	unregister_netdev(dev);
-+	mdiobus_unregister(sp->mii_bus);
-+	mdiobus_free(sp->mii_bus);
-+	kfree(dev);
-+	return 0;
-+}
-+
-+/**
-+ * Restart the AR2313 ethernet controller.
-+ */
-+static int ar231x_restart(struct net_device *dev)
-+{
-+	/* disable interrupts */
-+	disable_irq(dev->irq);
-+
-+	/* stop mac */
-+	ar231x_halt(dev);
-+
-+	/* initialize */
-+	ar231x_init(dev);
-+
-+	/* enable interrupts */
-+	enable_irq(dev->irq);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver ar231x_driver = {
-+	.driver.name = "ar231x-eth",
-+	.probe = ar231x_probe,
-+	.remove = ar231x_remove,
-+};
-+
-+module_platform_driver(ar231x_driver);
-+
-+static void ar231x_free_descriptors(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+
-+	if (sp->rx_ring != NULL) {
-+		kfree((void *)KSEG0ADDR(sp->rx_ring));
-+		sp->rx_ring = NULL;
-+		sp->tx_ring = NULL;
-+	}
-+}
-+
-+static int ar231x_allocate_descriptors(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	int size;
-+	int j;
-+	ar231x_descr_t *space;
-+
-+	if (sp->rx_ring != NULL) {
-+		printk("%s: already done.\n", __func__);
-+		return 0;
-+	}
-+
-+	size = sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES);
-+	space = kmalloc(size, GFP_KERNEL);
-+	if (space == NULL)
-+		return 1;
-+
-+	/* invalidate caches */
-+	dma_cache_inv((unsigned int)space, size);
-+
-+	/* now convert pointer to KSEG1 */
-+	space = (ar231x_descr_t *)KSEG1ADDR(space);
-+
-+	memset((void *)space, 0, size);
-+
-+	sp->rx_ring = space;
-+	space += AR2313_DESCR_ENTRIES;
-+
-+	sp->tx_ring = space;
-+	space += AR2313_DESCR_ENTRIES;
-+
-+	/* Initialize the transmit Descriptors */
-+	for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+		ar231x_descr_t *td = &sp->tx_ring[j];
-+
-+		td->status = 0;
-+		td->devcs = DMA_TX1_CHAINED;
-+		td->addr = 0;
-+		td->descr = virt_to_phys(&sp->tx_ring[DSC_NEXT(j)]);
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ * Generic cleanup handling data allocated during init. Used when the
-+ * module is unloaded or if an error occurs during initialization
-+ */
-+static void ar231x_init_cleanup(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	struct sk_buff *skb;
-+	int j;
-+
-+	ar231x_free_descriptors(dev);
-+
-+	if (sp->eth_regs)
-+		iounmap((void *)sp->eth_regs);
-+	if (sp->dma_regs)
-+		iounmap((void *)sp->dma_regs);
-+	if (sp->phy_regs)
-+		iounmap((void *)sp->phy_regs);
-+
-+	if (sp->rx_skb) {
-+		for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+			skb = sp->rx_skb[j];
-+			if (skb) {
-+				sp->rx_skb[j] = NULL;
-+				dev_kfree_skb(skb);
-+			}
-+		}
-+		kfree(sp->rx_skb);
-+		sp->rx_skb = NULL;
-+	}
-+
-+	if (sp->tx_skb) {
-+		for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+			skb = sp->tx_skb[j];
-+			if (skb) {
-+				sp->tx_skb[j] = NULL;
-+				dev_kfree_skb(skb);
-+			}
-+		}
-+		kfree(sp->tx_skb);
-+		sp->tx_skb = NULL;
-+	}
-+}
-+
-+static int ar231x_reset_reg(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	unsigned int ethsal, ethsah;
-+	unsigned int flags;
-+
-+	sp->cfg->reset_set(sp->cfg->reset_mac);
-+	mdelay(10);
-+	sp->cfg->reset_clear(sp->cfg->reset_mac);
-+	mdelay(10);
-+	sp->cfg->reset_set(sp->cfg->reset_phy);
-+	mdelay(10);
-+	sp->cfg->reset_clear(sp->cfg->reset_phy);
-+	mdelay(10);
-+
-+	sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
-+	mdelay(10);
-+	sp->dma_regs->bus_mode =
-+		((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-+
-+	/* enable interrupts */
-+	sp->dma_regs->intr_ena = DMA_STATUS_AIS | DMA_STATUS_NIS |
-+				 DMA_STATUS_RI | DMA_STATUS_TI |
-+				 DMA_STATUS_FBE;
-+	sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
-+	sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
-+	sp->dma_regs->control =
-+		(DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-+
-+	sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
-+	sp->eth_regs->vlan_tag = (0x8100);
-+
-+	/* Enable Ethernet Interface */
-+	flags = (MAC_CONTROL_TE |	/* transmit enable */
-+			 MAC_CONTROL_PM |	/* pass mcast */
-+			 MAC_CONTROL_F |	/* full duplex */
-+			 MAC_CONTROL_HBD);	/* heart beat disabled */
-+
-+	if (dev->flags & IFF_PROMISC) {	/* set promiscuous mode */
-+		flags |= MAC_CONTROL_PR;
-+	}
-+	sp->eth_regs->mac_control = flags;
-+
-+	/* Set all Ethernet station address registers to their initial values */
-+	ethsah = (((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+		 (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF);
-+
-+	ethsal = (((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+		 (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+		 (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+		 (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF);
-+
-+	sp->eth_regs->mac_addr[0] = ethsah;
-+	sp->eth_regs->mac_addr[1] = ethsal;
-+
-+	mdelay(10);
-+
-+	return 0;
-+}
-+
-+static int ar231x_init(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	int ecode = 0;
-+
-+	/* Allocate descriptors */
-+	if (ar231x_allocate_descriptors(dev)) {
-+		printk("%s: %s: ar231x_allocate_descriptors failed\n",
-+		       dev->name, __func__);
-+		ecode = -EAGAIN;
-+		goto init_error;
-+	}
-+
-+	/* Get the memory for the skb rings */
-+	if (sp->rx_skb == NULL) {
-+		sp->rx_skb =
-+			kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+				GFP_KERNEL);
-+		if (!(sp->rx_skb)) {
-+			printk("%s: %s: rx_skb kmalloc failed\n",
-+			       dev->name, __func__);
-+			ecode = -EAGAIN;
-+			goto init_error;
-+		}
-+	}
-+	memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+	if (sp->tx_skb == NULL) {
-+		sp->tx_skb =
-+			kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+				GFP_KERNEL);
-+		if (!(sp->tx_skb)) {
-+			printk("%s: %s: tx_skb kmalloc failed\n",
-+			       dev->name, __func__);
-+			ecode = -EAGAIN;
-+			goto init_error;
-+		}
-+	}
-+	memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+	/**
-+	 * Set tx_csm before we start receiving interrupts, otherwise
-+	 * the interrupt handler might think it is supposed to process
-+	 * tx ints before we are up and running, which may cause a null
-+	 * pointer access in the int handler.
-+	 */
-+	sp->rx_skbprd = 0;
-+	sp->cur_rx = 0;
-+	sp->tx_prd = 0;
-+	sp->tx_csm = 0;
-+
-+	/* Zero the stats before starting the interface */
-+	memset(&dev->stats, 0, sizeof(dev->stats));
-+
-+	/**
-+	 * We load the ring here as there seem to be no way to tell the
-+	 * firmware to wipe the ring without re-initializing it.
-+	 */
-+	ar231x_load_rx_ring(dev, RX_RING_SIZE);
-+
-+	/* Init hardware */
-+	ar231x_reset_reg(dev);
-+
-+	/* Get the IRQ */
-+	ecode = request_irq(dev->irq, &ar231x_interrupt, 0,
-+			    dev->name, dev);
-+	if (ecode) {
-+		printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
-+		       dev->name, __func__, dev->irq);
-+		goto init_error;
-+	}
-+
-+	tasklet_enable(&sp->rx_tasklet);
-+
-+	return 0;
-+
-+init_error:
-+	ar231x_init_cleanup(dev);
-+	return ecode;
-+}
-+
-+/**
-+ * Load the rx ring.
-+ *
-+ * Loading rings is safe without holding the spin lock since this is
-+ * done only before the device is enabled, thus no interrupts are
-+ * generated and by the interrupt handler/tasklet handler.
-+ */
-+static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	short i, idx;
-+
-+	idx = sp->rx_skbprd;
-+
-+	for (i = 0; i < nr_bufs; i++) {
-+		struct sk_buff *skb;
-+		ar231x_descr_t *rd;
-+
-+		if (sp->rx_skb[idx])
-+			break;
-+
-+		skb = netdev_alloc_skb_ip_align(dev, AR2313_BUFSIZE);
-+		if (!skb) {
-+			printk("\n\n\n\n %s: No memory in system\n\n\n\n",
-+			       __func__);
-+			break;
-+		}
-+
-+		/* Make sure IP header starts on a fresh cache line */
-+		skb->dev = dev;
-+		sp->rx_skb[idx] = skb;
-+
-+		rd = (ar231x_descr_t *)&sp->rx_ring[idx];
-+
-+		/* initialize dma descriptor */
-+		rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+					 DMA_RX1_CHAINED);
-+		rd->addr = virt_to_phys(skb->data);
-+		rd->descr = virt_to_phys(&sp->rx_ring[DSC_NEXT(idx)]);
-+		rd->status = DMA_RX_OWN;
-+
-+		idx = DSC_NEXT(idx);
-+	}
-+
-+	if (i)
-+		sp->rx_skbprd = idx;
-+}
-+
-+#define AR2313_MAX_PKTS_PER_CALL        64
-+
-+static int ar231x_rx_int(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	struct sk_buff *skb, *skb_new;
-+	ar231x_descr_t *rxdesc;
-+	unsigned int status;
-+	u32 idx;
-+	int pkts = 0;
-+	int rval;
-+
-+	idx = sp->cur_rx;
-+
-+	/* process at most the entire ring and then wait for another int */
-+	while (1) {
-+		rxdesc = &sp->rx_ring[idx];
-+		status = rxdesc->status;
-+
-+		if (status & DMA_RX_OWN) {
-+			/* SiByte owns descriptor or descr not yet filled in */
-+			rval = 0;
-+			break;
-+		}
-+
-+		if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
-+			rval = 1;
-+			break;
-+		}
-+
-+		if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
-+			dev->stats.rx_errors++;
-+			dev->stats.rx_dropped++;
-+
-+			/* add statistics counters */
-+			if (status & DMA_RX_ERR_CRC)
-+				dev->stats.rx_crc_errors++;
-+			if (status & DMA_RX_ERR_COL)
-+				dev->stats.rx_over_errors++;
-+			if (status & DMA_RX_ERR_LENGTH)
-+				dev->stats.rx_length_errors++;
-+			if (status & DMA_RX_ERR_RUNT)
-+				dev->stats.rx_over_errors++;
-+			if (status & DMA_RX_ERR_DESC)
-+				dev->stats.rx_over_errors++;
-+
-+		} else {
-+			/* alloc new buffer. */
-+			skb_new = netdev_alloc_skb_ip_align(dev,
-+							    AR2313_BUFSIZE);
-+			if (skb_new != NULL) {
-+				skb = sp->rx_skb[idx];
-+				/* set skb */
-+				skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) &
-+					0x3fff) - CRC_LEN);
-+
-+				dev->stats.rx_bytes += skb->len;
-+				skb->protocol = eth_type_trans(skb, dev);
-+				/* pass the packet to upper layers */
-+				netif_rx(skb);
-+
-+				skb_new->dev = dev;
-+				/* reset descriptor's curr_addr */
-+				rxdesc->addr = virt_to_phys(skb_new->data);
-+
-+				dev->stats.rx_packets++;
-+				sp->rx_skb[idx] = skb_new;
-+			} else {
-+				dev->stats.rx_dropped++;
-+			}
-+		}
-+
-+		rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+						 DMA_RX1_CHAINED);
-+		rxdesc->status = DMA_RX_OWN;
-+
-+		idx = DSC_NEXT(idx);
-+	}
-+
-+	sp->cur_rx = idx;
-+
-+	return rval;
-+}
-+
-+static void ar231x_tx_int(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	u32 idx;
-+	struct sk_buff *skb;
-+	ar231x_descr_t *txdesc;
-+	unsigned int status = 0;
-+
-+	idx = sp->tx_csm;
-+
-+	while (idx != sp->tx_prd) {
-+		txdesc = &sp->tx_ring[idx];
-+		status = txdesc->status;
-+
-+		if (status & DMA_TX_OWN) {
-+			/* ar231x dma still owns descr */
-+			break;
-+		}
-+		/* done with this descriptor */
-+		dma_unmap_single(&sp->pdev->dev, txdesc->addr,
-+				 txdesc->devcs & DMA_TX1_BSIZE_MASK,
-+				 DMA_TO_DEVICE);
-+		txdesc->status = 0;
-+
-+		if (status & DMA_TX_ERROR) {
-+			dev->stats.tx_errors++;
-+			dev->stats.tx_dropped++;
-+			if (status & DMA_TX_ERR_UNDER)
-+				dev->stats.tx_fifo_errors++;
-+			if (status & DMA_TX_ERR_HB)
-+				dev->stats.tx_heartbeat_errors++;
-+			if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
-+				dev->stats.tx_carrier_errors++;
-+			if (status & (DMA_TX_ERR_LATE | DMA_TX_ERR_COL |
-+			    DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
-+				dev->stats.tx_aborted_errors++;
-+		} else {
-+			/* transmit OK */
-+			dev->stats.tx_packets++;
-+		}
-+
-+		skb = sp->tx_skb[idx];
-+		sp->tx_skb[idx] = NULL;
-+		idx = DSC_NEXT(idx);
-+		dev->stats.tx_bytes += skb->len;
-+		dev_kfree_skb_irq(skb);
-+	}
-+
-+	sp->tx_csm = idx;
-+}
-+
-+static void rx_tasklet_func(unsigned long data)
-+{
-+	struct net_device *dev = (struct net_device *)data;
-+	struct ar231x_private *sp = netdev_priv(dev);
-+
-+	if (sp->unloading)
-+		return;
-+
-+	if (ar231x_rx_int(dev)) {
-+		tasklet_hi_schedule(&sp->rx_tasklet);
-+	} else {
-+		unsigned long flags;
-+
-+		spin_lock_irqsave(&sp->lock, flags);
-+		sp->dma_regs->intr_ena |= DMA_STATUS_RI;
-+		spin_unlock_irqrestore(&sp->lock, flags);
-+	}
-+}
-+
-+static void rx_schedule(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+
-+	sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-+
-+	tasklet_hi_schedule(&sp->rx_tasklet);
-+}
-+
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
-+{
-+	struct net_device *dev = (struct net_device *)dev_id;
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	unsigned int status, enabled;
-+
-+	/* clear interrupt */
-+	/* Don't clear RI bit if currently disabled */
-+	status = sp->dma_regs->status;
-+	enabled = sp->dma_regs->intr_ena;
-+	sp->dma_regs->status = status & enabled;
-+
-+	if (status & DMA_STATUS_NIS) {
-+		/* normal status */
-+		/**
-+		 * Don't schedule rx processing if interrupt
-+		 * is already disabled.
-+		 */
-+		if (status & enabled & DMA_STATUS_RI) {
-+			/* receive interrupt */
-+			rx_schedule(dev);
-+		}
-+		if (status & DMA_STATUS_TI) {
-+			/* transmit interrupt */
-+			ar231x_tx_int(dev);
-+		}
-+	}
-+
-+	/* abnormal status */
-+	if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS))
-+		ar231x_restart(dev);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int ar231x_open(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	unsigned int ethsal, ethsah;
-+
-+	/* reset the hardware, in case the MAC address changed */
-+	ethsah = (((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+		 (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF);
-+
-+	ethsal = (((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+		 (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+		 (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+		 (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF);
-+
-+	sp->eth_regs->mac_addr[0] = ethsah;
-+	sp->eth_regs->mac_addr[1] = ethsal;
-+
-+	mdelay(10);
-+
-+	dev->mtu = 1500;
-+	netif_start_queue(dev);
-+
-+	sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-+
-+	phy_start(sp->phy_dev);
-+
-+	return 0;
-+}
-+
-+static void ar231x_tx_timeout(struct net_device *dev, unsigned int txqueue)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&sp->lock, flags);
-+	ar231x_restart(dev);
-+	spin_unlock_irqrestore(&sp->lock, flags);
-+}
-+
-+static void ar231x_halt(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	int j;
-+
-+	tasklet_disable(&sp->rx_tasklet);
-+
-+	/* kill the MAC */
-+	sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE |	/* disable Receives */
-+				       MAC_CONTROL_TE);	/* disable Transmits */
-+	/* stop dma */
-+	sp->dma_regs->control = 0;
-+	sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-+
-+	/* place phy and MAC in reset */
-+	sp->cfg->reset_set(sp->cfg->reset_mac);
-+	sp->cfg->reset_set(sp->cfg->reset_phy);
-+
-+	/* free buffers on tx ring */
-+	for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+		struct sk_buff *skb;
-+		ar231x_descr_t *txdesc;
-+
-+		txdesc = &sp->tx_ring[j];
-+		txdesc->descr = 0;
-+
-+		skb = sp->tx_skb[j];
-+		if (skb) {
-+			dev_kfree_skb(skb);
-+			sp->tx_skb[j] = NULL;
-+		}
-+	}
-+}
-+
-+/**
-+ * close should do nothing. Here's why. It's called when
-+ * 'ifconfig bond0 down' is run. If it calls free_irq then
-+ * the irq is gone forever ! When bond0 is made 'up' again,
-+ * the ar231x_open () does not call request_irq (). Worse,
-+ * the call to ar231x_halt() generates a WDOG reset due to
-+ * the write to reset register and the box reboots.
-+ * Commenting this out is good since it allows the
-+ * system to resume when bond0 is made up again.
-+ */
-+static int ar231x_close(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+#if 0
-+	/* Disable interrupts */
-+	disable_irq(dev->irq);
-+
-+	/**
-+	 * Without (or before) releasing irq and stopping hardware, this
-+	 * is an absolute non-sense, by the way. It will be reset instantly
-+	 * by the first irq.
-+	 */
-+	netif_stop_queue(dev);
-+
-+	/* stop the MAC and DMA engines */
-+	ar231x_halt(dev);
-+
-+	/* release the interrupt */
-+	free_irq(dev->irq, dev);
-+
-+#endif
-+
-+	phy_stop(sp->phy_dev);
-+
-+	return 0;
-+}
-+
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	ar231x_descr_t *td;
-+	u32 idx;
-+
-+	idx = sp->tx_prd;
-+	td = &sp->tx_ring[idx];
-+
-+	if (td->status & DMA_TX_OWN) {
-+		/* free skbuf and lie to the caller that we sent it out */
-+		dev->stats.tx_dropped++;
-+		dev_kfree_skb(skb);
-+
-+		/* restart transmitter in case locked */
-+		sp->dma_regs->xmt_poll = 0;
-+		return 0;
-+	}
-+
-+	/* Setup the transmit descriptor. */
-+	td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
-+				 (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
-+	td->addr = dma_map_single(&sp->pdev->dev, skb->data, skb->len, DMA_TO_DEVICE);
-+	td->status = DMA_TX_OWN;
-+
-+	/* kick transmitter last */
-+	sp->dma_regs->xmt_poll = 0;
-+
-+	sp->tx_skb[idx] = skb;
-+	idx = DSC_NEXT(idx);
-+	sp->tx_prd = idx;
-+
-+	return 0;
-+}
-+
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+
-+	switch (cmd) {
-+	case SIOCGMIIPHY:
-+	case SIOCGMIIREG:
-+	case SIOCSMIIREG:
-+		return phy_mii_ioctl(sp->phy_dev, ifr, cmd);
-+
-+	default:
-+		break;
-+	}
-+
-+	return -EOPNOTSUPP;
-+}
-+
-+static void ar231x_adjust_link(struct net_device *dev)
-+{
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	struct phy_device *phydev = sp->phy_dev;
-+	u32 mc;
-+
-+	if (!phydev->link) {
-+		if (sp->link) {
-+			pr_info("%s: link down\n", dev->name);
-+			sp->link = 0;
-+		}
-+		return;
-+	}
-+	sp->link = 1;
-+
-+	pr_info("%s: link up (%uMbps/%s duplex)\n", dev->name,
-+		phydev->speed, phydev->duplex ? "full" : "half");
-+
-+	mc = sp->eth_regs->mac_control;
-+	if (phydev->duplex)
-+		mc = (mc | MAC_CONTROL_F) & ~MAC_CONTROL_DRO;
-+	else
-+		mc = (mc | MAC_CONTROL_DRO) & ~MAC_CONTROL_F;
-+	sp->eth_regs->mac_control = mc;
-+	sp->duplex = phydev->duplex;
-+}
-+
-+#define MII_ADDR(phy, reg) \
-+	((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
-+
-+static int
-+ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
-+{
-+	struct net_device *const dev = bus->priv;
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	volatile MII *ethernet = sp->phy_regs;
-+
-+	ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
-+	while (ethernet->mii_addr & MII_ADDR_BUSY)
-+		;
-+	return ethernet->mii_data >> MII_DATA_SHIFT;
-+}
-+
-+static int
-+ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
-+{
-+	struct net_device *const dev = bus->priv;
-+	struct ar231x_private *sp = netdev_priv(dev);
-+	volatile MII *ethernet = sp->phy_regs;
-+
-+	while (ethernet->mii_addr & MII_ADDR_BUSY)
-+		;
-+	ethernet->mii_data = value << MII_DATA_SHIFT;
-+	ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
-+
-+	return 0;
-+}
-+
-+static int ar231x_mdiobus_reset(struct mii_bus *bus)
-+{
-+	struct net_device *const dev = bus->priv;
-+
-+	ar231x_reset_reg(dev);
-+
-+	return 0;
-+}
-+
-+static int ar231x_mdiobus_probe(struct net_device *dev)
-+{
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-+	struct ar231x_private *const sp = netdev_priv(dev);
-+	struct phy_device *phydev = NULL;
-+
-+	/* find the first (lowest address) PHY on the current MAC's MII bus */
-+	phydev = phy_find_first(sp->mii_bus);
-+	if (!phydev) {
-+		printk(KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
-+		return -1;
-+	}
-+
-+	/* now we are supposed to have a proper phydev, to attach to... */
-+	BUG_ON(phydev->attached_dev);
-+
-+	phydev = phy_connect(dev, phydev_name(phydev), &ar231x_adjust_link,
-+			     PHY_INTERFACE_MODE_MII);
-+	if (IS_ERR(phydev)) {
-+		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+		return PTR_ERR(phydev);
-+	}
-+
-+	/* mask with MAC supported features */
-+	linkmode_set_bit_array(phy_10_100_features_array,
-+			       ARRAY_SIZE(phy_10_100_features_array),
-+			       mask);
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, mask);
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_MII_BIT, mask);
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, mask);
-+
-+	linkmode_and(phydev->supported, phydev->supported, mask);
-+	linkmode_copy(phydev->advertising, phydev->supported);
-+
-+	sp->phy_dev = phydev;
-+
-+	printk(KERN_INFO "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
-+	       dev->name, phydev->drv->name, phydev_name(phydev));
-+
-+	return 0;
-+}
-+
---- /dev/null
-+++ b/drivers/net/ethernet/atheros/ar231x/ar231x.h
-@@ -0,0 +1,282 @@
-+/*
-+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef _AR2313_H_
-+#define _AR2313_H_
-+
-+#include <linux/interrupt.h>
-+#include <generated/autoconf.h>
-+#include <linux/bitops.h>
-+#include <ath25_platform.h>
-+
-+/* probe link timer - 5 secs */
-+#define LINK_TIMER    (5*HZ)
-+
-+#define IS_DMA_TX_INT(X)   (((X) & (DMA_STATUS_TI)) != 0)
-+#define IS_DMA_RX_INT(X)   (((X) & (DMA_STATUS_RI)) != 0)
-+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN))    == 0)
-+
-+#define AR2313_TX_TIMEOUT (HZ/4)
-+
-+/* Rings */
-+#define DSC_RING_ENTRIES_SIZE	(AR2313_DESCR_ENTRIES * sizeof(struct desc))
-+#define DSC_NEXT(idx)	        ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
-+
-+#define AR2313_MBGET		2
-+#define AR2313_MBSET		3
-+#define AR2313_PCI_RECONFIG	4
-+#define AR2313_PCI_DUMP		5
-+#define AR2313_TEST_PANIC	6
-+#define AR2313_TEST_NULLPTR	7
-+#define AR2313_READ_DATA	8
-+#define AR2313_WRITE_DATA	9
-+#define AR2313_GET_VERSION	10
-+#define AR2313_TEST_HANG	11
-+#define AR2313_SYNC		12
-+
-+#define DMA_RX_ERR_CRC		BIT(1)
-+#define DMA_RX_ERR_DRIB		BIT(2)
-+#define DMA_RX_ERR_MII		BIT(3)
-+#define DMA_RX_EV2		BIT(5)
-+#define DMA_RX_ERR_COL		BIT(6)
-+#define DMA_RX_LONG		BIT(7)
-+#define DMA_RX_LS		BIT(8)	/* last descriptor */
-+#define DMA_RX_FS		BIT(9)	/* first descriptor */
-+#define DMA_RX_MF		BIT(10)	/* multicast frame */
-+#define DMA_RX_ERR_RUNT		BIT(11)	/* runt frame */
-+#define DMA_RX_ERR_LENGTH	BIT(12)	/* length error */
-+#define DMA_RX_ERR_DESC		BIT(14)	/* descriptor error */
-+#define DMA_RX_ERROR		BIT(15)	/* error summary */
-+#define DMA_RX_LEN_MASK		0x3fff0000
-+#define DMA_RX_LEN_SHIFT	16
-+#define DMA_RX_FILT		BIT(30)
-+#define DMA_RX_OWN		BIT(31)	/* desc owned by DMA controller */
-+
-+#define DMA_RX1_BSIZE_MASK	0x000007ff
-+#define DMA_RX1_BSIZE_SHIFT	0
-+#define DMA_RX1_CHAINED		BIT(24)
-+#define DMA_RX1_RER		BIT(25)
-+
-+#define DMA_TX_ERR_UNDER	BIT(1)	/* underflow error */
-+#define DMA_TX_ERR_DEFER	BIT(2)	/* excessive deferral */
-+#define DMA_TX_COL_MASK		0x78
-+#define DMA_TX_COL_SHIFT	3
-+#define DMA_TX_ERR_HB		BIT(7)	/* hearbeat failure */
-+#define DMA_TX_ERR_COL		BIT(8)	/* excessive collisions */
-+#define DMA_TX_ERR_LATE		BIT(9)	/* late collision */
-+#define DMA_TX_ERR_LINK		BIT(10)	/* no carrier */
-+#define DMA_TX_ERR_LOSS		BIT(11)	/* loss of carrier */
-+#define DMA_TX_ERR_JABBER	BIT(14)	/* transmit jabber timeout */
-+#define DMA_TX_ERROR		BIT(15)	/* frame aborted */
-+#define DMA_TX_OWN		BIT(31)	/* descr owned by DMA controller */
-+
-+#define DMA_TX1_BSIZE_MASK	0x000007ff
-+#define DMA_TX1_BSIZE_SHIFT	0
-+#define DMA_TX1_CHAINED		BIT(24)	/* chained descriptors */
-+#define DMA_TX1_TER		BIT(25)	/* transmit end of ring */
-+#define DMA_TX1_FS		BIT(29)	/* first segment */
-+#define DMA_TX1_LS		BIT(30)	/* last segment */
-+#define DMA_TX1_IC		BIT(31)	/* interrupt on completion */
-+
-+#define RCVPKT_LENGTH(X)	(X  >> 16)	/* Received pkt Length */
-+
-+#define MAC_CONTROL_RE		BIT(2)	/* receive enable */
-+#define MAC_CONTROL_TE		BIT(3)	/* transmit enable */
-+#define MAC_CONTROL_DC		BIT(5)	/* Deferral check */
-+#define MAC_CONTROL_ASTP	BIT(8)	/* Auto pad strip */
-+#define MAC_CONTROL_DRTY	BIT(10)	/* Disable retry */
-+#define MAC_CONTROL_DBF		BIT(11)	/* Disable bcast frames */
-+#define MAC_CONTROL_LCC		BIT(12)	/* late collision ctrl */
-+#define MAC_CONTROL_HP		BIT(13)	/* Hash Perfect filtering */
-+#define MAC_CONTROL_HASH	BIT(14)	/* Unicast hash filtering */
-+#define MAC_CONTROL_HO		BIT(15)	/* Hash only filtering */
-+#define MAC_CONTROL_PB		BIT(16)	/* Pass Bad frames */
-+#define MAC_CONTROL_IF		BIT(17)	/* Inverse filtering */
-+#define MAC_CONTROL_PR		BIT(18)	/* promis mode (valid frames only) */
-+#define MAC_CONTROL_PM		BIT(19)	/* pass multicast */
-+#define MAC_CONTROL_F		BIT(20)	/* full-duplex */
-+#define MAC_CONTROL_DRO		BIT(23)	/* Disable Receive Own */
-+#define MAC_CONTROL_HBD		BIT(28)	/* heart-beat disabled (MUST BE SET) */
-+#define MAC_CONTROL_BLE		BIT(30)	/* big endian mode */
-+#define MAC_CONTROL_RA		BIT(31)	/* rcv all (valid and invalid frames) */
-+
-+#define MII_ADDR_BUSY		BIT(0)
-+#define MII_ADDR_WRITE		BIT(1)
-+#define MII_ADDR_REG_SHIFT	6
-+#define MII_ADDR_PHY_SHIFT	11
-+#define MII_DATA_SHIFT		0
-+
-+#define FLOW_CONTROL_FCE	BIT(1)
-+
-+#define DMA_BUS_MODE_SWR	BIT(0)	/* software reset */
-+#define DMA_BUS_MODE_BLE	BIT(7)	/* big endian mode */
-+#define DMA_BUS_MODE_PBL_SHIFT	8	/* programmable burst length 32 */
-+#define DMA_BUS_MODE_DBO	BIT(20)	/* big-endian descriptors */
-+
-+#define DMA_STATUS_TI		BIT(0)	/* transmit interrupt */
-+#define DMA_STATUS_TPS		BIT(1)	/* transmit process stopped */
-+#define DMA_STATUS_TU		BIT(2)	/* transmit buffer unavailable */
-+#define DMA_STATUS_TJT		BIT(3)	/* transmit buffer timeout */
-+#define DMA_STATUS_UNF		BIT(5)	/* transmit underflow */
-+#define DMA_STATUS_RI		BIT(6)	/* receive interrupt */
-+#define DMA_STATUS_RU		BIT(7)	/* receive buffer unavailable */
-+#define DMA_STATUS_RPS		BIT(8)	/* receive process stopped */
-+#define DMA_STATUS_ETI		BIT(10)	/* early transmit interrupt */
-+#define DMA_STATUS_FBE		BIT(13)	/* fatal bus interrupt */
-+#define DMA_STATUS_ERI		BIT(14)	/* early receive interrupt */
-+#define DMA_STATUS_AIS		BIT(15)	/* abnormal interrupt summary */
-+#define DMA_STATUS_NIS		BIT(16)	/* normal interrupt summary */
-+#define DMA_STATUS_RS_SHIFT	17	/* receive process state */
-+#define DMA_STATUS_TS_SHIFT	20	/* transmit process state */
-+#define DMA_STATUS_EB_SHIFT	23	/* error bits */
-+
-+#define DMA_CONTROL_SR		BIT(1)	/* start receive */
-+#define DMA_CONTROL_ST		BIT(13)	/* start transmit */
-+#define DMA_CONTROL_SF		BIT(21)	/* store and forward */
-+
-+typedef struct {
-+	volatile unsigned int status;	/* OWN, Device control and status. */
-+	volatile unsigned int devcs;	/* pkt Control bits + Length */
-+	volatile unsigned int addr;	/* Current Address. */
-+	volatile unsigned int descr;	/* Next descriptor in chain. */
-+} ar231x_descr_t;
-+
-+/**
-+ * New Combo structure for Both Eth0 AND eth1
-+ *
-+ * Don't directly access MII related regs since phy chip could be actually
-+ * connected to another ethernet block.
-+ */
-+typedef struct {
-+	volatile unsigned int mac_control;	/* 0x00 */
-+	volatile unsigned int mac_addr[2];	/* 0x04 - 0x08 */
-+	volatile unsigned int mcast_table[2];	/* 0x0c - 0x10 */
-+	volatile unsigned int __mii_addr;	/* 0x14 */
-+	volatile unsigned int __mii_data;	/* 0x18 */
-+	volatile unsigned int flow_control;	/* 0x1c */
-+	volatile unsigned int vlan_tag;	/* 0x20 */
-+	volatile unsigned int pad[7];	/* 0x24 - 0x3c */
-+	volatile unsigned int ucast_table[8];	/* 0x40-0x5c */
-+} ETHERNET_STRUCT;
-+
-+typedef struct {
-+	volatile unsigned int mii_addr;
-+	volatile unsigned int mii_data;
-+} MII;
-+
-+/********************************************************************
-+ * Interrupt controller
-+ ********************************************************************/
-+
-+typedef struct {
-+	volatile unsigned int wdog_control;	/* 0x08 */
-+	volatile unsigned int wdog_timer;	/* 0x0c */
-+	volatile unsigned int misc_status;	/* 0x10 */
-+	volatile unsigned int misc_mask;	/* 0x14 */
-+	volatile unsigned int global_status;	/* 0x18 */
-+	volatile unsigned int reserved;	/* 0x1c */
-+	volatile unsigned int reset_control;	/* 0x20 */
-+} INTERRUPT;
-+
-+/********************************************************************
-+ * DMA controller
-+ ********************************************************************/
-+typedef struct {
-+	volatile unsigned int bus_mode;	/* 0x00 (CSR0) */
-+	volatile unsigned int xmt_poll;	/* 0x04 (CSR1) */
-+	volatile unsigned int rcv_poll;	/* 0x08 (CSR2) */
-+	volatile unsigned int rcv_base;	/* 0x0c (CSR3) */
-+	volatile unsigned int xmt_base;	/* 0x10 (CSR4) */
-+	volatile unsigned int status;	/* 0x14 (CSR5) */
-+	volatile unsigned int control;	/* 0x18 (CSR6) */
-+	volatile unsigned int intr_ena;	/* 0x1c (CSR7) */
-+	volatile unsigned int rcv_missed;	/* 0x20 (CSR8) */
-+	volatile unsigned int reserved[11];	/* 0x24-0x4c (CSR9-19) */
-+	volatile unsigned int cur_tx_buf_addr;	/* 0x50 (CSR20) */
-+	volatile unsigned int cur_rx_buf_addr;	/* 0x50 (CSR21) */
-+} DMA;
-+
-+/**
-+ * Struct private for the Sibyte.
-+ *
-+ * Elements are grouped so variables used by the tx handling goes
-+ * together, and will go into the same cache lines etc. in order to
-+ * avoid cache line contention between the rx and tx handling on SMP.
-+ *
-+ * Frequently accessed variables are put at the beginning of the
-+ * struct to help the compiler generate better/shorter code.
-+ */
-+struct ar231x_private {
-+	struct net_device *dev;
-+	struct platform_device *pdev;
-+	int version;
-+	u32 mb[2];
-+
-+	volatile MII *phy_regs;
-+	volatile ETHERNET_STRUCT *eth_regs;
-+	volatile DMA *dma_regs;
-+	struct ar231x_eth *cfg;
-+
-+	spinlock_t lock;			/* Serialise access to device */
-+
-+	/* RX and TX descriptors, must be adjacent */
-+	ar231x_descr_t *rx_ring;
-+	ar231x_descr_t *tx_ring;
-+
-+	struct sk_buff **rx_skb;
-+	struct sk_buff **tx_skb;
-+
-+	/* RX elements */
-+	u32 rx_skbprd;
-+	u32 cur_rx;
-+
-+	/* TX elements */
-+	u32 tx_prd;
-+	u32 tx_csm;
-+
-+	/* Misc elements */
-+	char name[48];
-+	struct {
-+		u32 address;
-+		u32 length;
-+		char *mapping;
-+	} desc;
-+
-+	unsigned short link;		/* 0 - link down, 1 - link up */
-+	unsigned short duplex;		/* 0 - half, 1 - full */
-+
-+	struct tasklet_struct rx_tasklet;
-+	int unloading;
-+
-+	struct phy_device *phy_dev;
-+	struct mii_bus *mii_bus;
-+};
-+
-+/* Prototypes */
-+static int ar231x_init(struct net_device *dev);
-+#ifdef TX_TIMEOUT
-+static void ar231x_tx_timeout(struct net_device *dev);
-+#endif
-+static int ar231x_restart(struct net_device *dev);
-+static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
-+static int ar231x_open(struct net_device *dev);
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static int ar231x_close(struct net_device *dev);
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
-+static void ar231x_init_cleanup(struct net_device *dev);
-+
-+#endif	/* _AR2313_H_ */
---- a/arch/mips/ath25/ar2315_regs.h
-+++ b/arch/mips/ath25/ar2315_regs.h
-@@ -57,6 +57,9 @@
- #define AR2315_PCI_EXT_BASE	0x80000000	/* PCI external */
- #define AR2315_PCI_EXT_SIZE	0x40000000
- 
-+/* MII registers offset inside Ethernet MMR region */
-+#define AR2315_ENET0_MII_BASE	(AR2315_ENET0_BASE + 0x14)
-+
- /*
-  * Configuration registers
-  */
---- a/arch/mips/ath25/ar5312_regs.h
-+++ b/arch/mips/ath25/ar5312_regs.h
-@@ -64,6 +64,10 @@
- #define AR5312_AR5312_REV7	0x0057		/* AR5312 WMAC (AP30-040) */
- #define AR5312_AR2313_REV8	0x0058		/* AR2313 WMAC (AP43-030) */
- 
-+/* MII registers offset inside Ethernet MMR region */
-+#define AR5312_ENET0_MII_BASE	(AR5312_ENET0_BASE + 0x14)
-+#define AR5312_ENET1_MII_BASE	(AR5312_ENET1_BASE + 0x14)
-+
- /* Reset/Timer Block Address Map */
- #define AR5312_TIMER		0x0000 /* countdown timer */
- #define AR5312_RELOAD		0x0004 /* timer reload value */
---- a/arch/mips/ath25/ar2315.c
-+++ b/arch/mips/ath25/ar2315.c
-@@ -132,6 +132,8 @@ static void ar2315_irq_dispatch(void)
- 
- 	if (pending & CAUSEF_IP3)
- 		do_IRQ(AR2315_IRQ_WLAN0);
-+	else if (pending & CAUSEF_IP4)
-+		do_IRQ(AR2315_IRQ_ENET0);
- #ifdef CONFIG_PCI_AR2315
- 	else if (pending & CAUSEF_IP5)
- 		do_IRQ(AR2315_IRQ_LCBUS_PCI);
-@@ -167,6 +169,29 @@ void __init ar2315_arch_init_irq(void)
- 	ar2315_misc_irq_domain = domain;
- }
- 
-+static void ar2315_device_reset_set(u32 mask)
-+{
-+	u32 val;
-+
-+	val = ar2315_rst_reg_read(AR2315_RESET);
-+	ar2315_rst_reg_write(AR2315_RESET, val | mask);
-+}
-+
-+static void ar2315_device_reset_clear(u32 mask)
-+{
-+	u32 val;
-+
-+	val = ar2315_rst_reg_read(AR2315_RESET);
-+	ar2315_rst_reg_write(AR2315_RESET, val & ~mask);
-+}
-+
-+static struct ar231x_eth ar2315_eth_data = {
-+	.reset_set = ar2315_device_reset_set,
-+	.reset_clear = ar2315_device_reset_clear,
-+	.reset_mac = AR2315_RESET_ENET0,
-+	.reset_phy = AR2315_RESET_EPHY0,
-+};
-+
- static struct resource ar2315_gpio_res[] = {
- 	{
- 		.name = "ar2315-gpio",
-@@ -203,6 +228,11 @@ void __init ar2315_init_devices(void)
- 	ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
- 	platform_device_register(&ar2315_gpio);
- 
-+	ar2315_eth_data.macaddr = ath25_board.config->enet0_mac;
-+	ath25_add_ethernet(0, AR2315_ENET0_BASE, "eth0_mii",
-+			   AR2315_ENET0_MII_BASE, AR2315_IRQ_ENET0,
-+			   &ar2315_eth_data);
-+
- 	ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0);
- }
- 
---- a/arch/mips/ath25/ar5312.c
-+++ b/arch/mips/ath25/ar5312.c
-@@ -128,6 +128,10 @@ static void ar5312_irq_dispatch(void)
- 
- 	if (pending & CAUSEF_IP2)
- 		do_IRQ(AR5312_IRQ_WLAN0);
-+	else if (pending & CAUSEF_IP3)
-+		do_IRQ(AR5312_IRQ_ENET0);
-+	else if (pending & CAUSEF_IP4)
-+		do_IRQ(AR5312_IRQ_ENET1);
- 	else if (pending & CAUSEF_IP5)
- 		do_IRQ(AR5312_IRQ_WLAN1);
- 	else if (pending & CAUSEF_IP6)
-@@ -161,6 +165,36 @@ void __init ar5312_arch_init_irq(void)
- 	ar5312_misc_irq_domain = domain;
- }
- 
-+static void ar5312_device_reset_set(u32 mask)
-+{
-+	u32 val;
-+
-+	val = ar5312_rst_reg_read(AR5312_RESET);
-+	ar5312_rst_reg_write(AR5312_RESET, val | mask);
-+}
-+
-+static void ar5312_device_reset_clear(u32 mask)
-+{
-+	u32 val;
-+
-+	val = ar5312_rst_reg_read(AR5312_RESET);
-+	ar5312_rst_reg_write(AR5312_RESET, val & ~mask);
-+}
-+
-+static struct ar231x_eth ar5312_eth0_data = {
-+	.reset_set = ar5312_device_reset_set,
-+	.reset_clear = ar5312_device_reset_clear,
-+	.reset_mac = AR5312_RESET_ENET0,
-+	.reset_phy = AR5312_RESET_EPHY0,
-+};
-+
-+static struct ar231x_eth ar5312_eth1_data = {
-+	.reset_set = ar5312_device_reset_set,
-+	.reset_clear = ar5312_device_reset_clear,
-+	.reset_mac = AR5312_RESET_ENET1,
-+	.reset_phy = AR5312_RESET_EPHY1,
-+};
-+
- static struct physmap_flash_data ar5312_flash_data = {
- 	.width = 2,
- };
-@@ -241,6 +275,7 @@ static void __init ar5312_flash_init(voi
- void __init ar5312_init_devices(void)
- {
- 	struct ath25_boarddata *config;
-+	u8 *c;
- 
- 	ar5312_flash_init();
- 
-@@ -264,8 +299,30 @@ void __init ar5312_init_devices(void)
- 
- 	platform_device_register(&ar5312_gpio);
- 
-+	/* Fix up MAC addresses if necessary */
-+	if (is_broadcast_ether_addr(config->enet0_mac))
-+		ether_addr_copy(config->enet0_mac, config->enet1_mac);
-+
-+	/* If ENET0 and ENET1 have the same mac address,
-+	 * increment the one from ENET1 */
-+	if (ether_addr_equal(config->enet0_mac, config->enet1_mac)) {
-+		c = config->enet1_mac + 5;
-+		while ((c >= config->enet1_mac) && !(++(*c)))
-+			c--;
-+	}
-+
- 	switch (ath25_soc) {
- 	case ATH25_SOC_AR5312:
-+		ar5312_eth0_data.macaddr = config->enet0_mac;
-+		ath25_add_ethernet(0, AR5312_ENET0_BASE, "eth0_mii",
-+				   AR5312_ENET0_MII_BASE, AR5312_IRQ_ENET0,
-+				   &ar5312_eth0_data);
-+
-+		ar5312_eth1_data.macaddr = config->enet1_mac;
-+		ath25_add_ethernet(1, AR5312_ENET1_BASE, "eth1_mii",
-+				   AR5312_ENET1_MII_BASE, AR5312_IRQ_ENET1,
-+				   &ar5312_eth1_data);
-+
- 		if (!ath25_board.radio)
- 			return;
- 
-@@ -274,8 +331,18 @@ void __init ar5312_init_devices(void)
- 
- 		ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0);
- 		break;
-+	/*
-+	 * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
-+	 * of ENET1. Atheros calls it 'twisted' for a reason :)
-+	 */
- 	case ATH25_SOC_AR2312:
- 	case ATH25_SOC_AR2313:
-+		ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
-+		ar5312_eth1_data.macaddr = config->enet0_mac;
-+		ath25_add_ethernet(1, AR5312_ENET1_BASE, "eth0_mii",
-+				   AR5312_ENET0_MII_BASE, AR5312_IRQ_ENET1,
-+				   &ar5312_eth1_data);
-+
- 		if (!ath25_board.radio)
- 			return;
- 		break;
---- a/arch/mips/ath25/devices.h
-+++ b/arch/mips/ath25/devices.h
-@@ -33,6 +33,8 @@ extern struct ar231x_board_config ath25_
- extern void (*ath25_irq_dispatch)(void);
- 
- int ath25_find_config(phys_addr_t offset, unsigned long size);
-+int ath25_add_ethernet(int nr, u32 base, const char *mii_name, u32 mii_base,
-+		       int irq, void *pdata);
- void ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk);
- int ath25_add_wmac(int nr, u32 base, int irq);
- 
---- a/arch/mips/ath25/devices.c
-+++ b/arch/mips/ath25/devices.c
-@@ -13,6 +13,51 @@
- struct ar231x_board_config ath25_board;
- enum ath25_soc_type ath25_soc = ATH25_SOC_UNKNOWN;
- 
-+static struct resource ath25_eth0_res[] = {
-+	{
-+		.name = "eth0_membase",
-+		.flags = IORESOURCE_MEM,
-+	},
-+	{
-+		.name = "eth0_mii",
-+		.flags = IORESOURCE_MEM,
-+	},
-+	{
-+		.name = "eth0_irq",
-+		.flags = IORESOURCE_IRQ,
-+	}
-+};
-+
-+static struct resource ath25_eth1_res[] = {
-+	{
-+		.name = "eth1_membase",
-+		.flags = IORESOURCE_MEM,
-+	},
-+	{
-+		.name = "eth1_mii",
-+		.flags = IORESOURCE_MEM,
-+	},
-+	{
-+		.name = "eth1_irq",
-+		.flags = IORESOURCE_IRQ,
-+	}
-+};
-+
-+static struct platform_device ath25_eth[] = {
-+	{
-+		.id = 0,
-+		.name = "ar231x-eth",
-+		.resource = ath25_eth0_res,
-+		.num_resources = ARRAY_SIZE(ath25_eth0_res)
-+	},
-+	{
-+		.id = 1,
-+		.name = "ar231x-eth",
-+		.resource = ath25_eth1_res,
-+		.num_resources = ARRAY_SIZE(ath25_eth1_res)
-+	}
-+};
-+
- static struct resource ath25_wmac0_res[] = {
- 	{
- 		.name = "wmac0_membase",
-@@ -71,6 +116,25 @@ const char *get_system_type(void)
- 	return soc_type_strings[ath25_soc];
- }
- 
-+int __init ath25_add_ethernet(int nr, u32 base, const char *mii_name,
-+			      u32 mii_base, int irq, void *pdata)
-+{
-+	struct resource *res;
-+
-+	ath25_eth[nr].dev.platform_data = pdata;
-+	res = &ath25_eth[nr].resource[0];
-+	res->start = base;
-+	res->end = base + 0x2000 - 1;
-+	res++;
-+	res->name = mii_name;
-+	res->start = mii_base;
-+	res->end = mii_base + 8 - 1;
-+	res++;
-+	res->start = irq;
-+	res->end = irq;
-+	return platform_device_register(&ath25_eth[nr]);
-+}
-+
- void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk)
- {
- #ifdef CONFIG_SERIAL_8250_CONSOLE
---- a/arch/mips/include/asm/mach-ath25/ath25_platform.h
-+++ b/arch/mips/include/asm/mach-ath25/ath25_platform.h
-@@ -71,4 +71,15 @@ struct ar231x_board_config {
- 	const char *radio;
- };
- 
-+/*
-+ * Platform device information for the Ethernet MAC
-+ */
-+struct ar231x_eth {
-+	void (*reset_set)(u32);
-+	void (*reset_clear)(u32);
-+	u32 reset_mac;
-+	u32 reset_phy;
-+	char *macaddr;
-+};
-+
- #endif /* __ASM_MACH_ATH25_PLATFORM_H */
diff --git a/target/linux/ath25/patches-5.10/120-spiflash.patch b/target/linux/ath25/patches-5.10/120-spiflash.patch
deleted file mode 100644
index 6b869d9fcd2c..000000000000
--- a/target/linux/ath25/patches-5.10/120-spiflash.patch
+++ /dev/null
@@ -1,631 +0,0 @@
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
-@@ -114,6 +114,10 @@ config MTD_BCM47XXSFLASH
- 	  registered by bcma as platform devices. This enables driver for
- 	  serial flash memories.
- 
-+config MTD_AR2315
-+	tristate "Atheros AR2315+ SPI Flash support"
-+	depends on SOC_AR2315
-+
- config MTD_SLRAM
- 	tristate "Uncached system RAM"
- 	help
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataf
- obj-$(CONFIG_MTD_MCHP23K256)	+= mchp23k256.o
- obj-$(CONFIG_MTD_SPEAR_SMI)	+= spear_smi.o
- obj-$(CONFIG_MTD_SST25L)	+= sst25l.o
-+obj-$(CONFIG_MTD_AR2315)	+= ar2315.o
- obj-$(CONFIG_MTD_BCM47XXSFLASH)	+= bcm47xxsflash.o
- obj-$(CONFIG_MTD_ST_SPI_FSM)    += st_spi_fsm.o
- obj-$(CONFIG_MTD_POWERNV_FLASH)	+= powernv_flash.o
---- /dev/null
-+++ b/drivers/mtd/devices/ar2315.c
-@@ -0,0 +1,456 @@
-+
-+/*
-+ * MTD driver for the SPI Flash Memory support on Atheros AR2315
-+ *
-+ * Copyright (c) 2005-2006 Atheros Communications Inc.
-+ * Copyright (C) 2006-2007 FON Technology, SL.
-+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
-+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/platform_device.h>
-+#include <linux/sched.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/mutex.h>
-+
-+#include "ar2315_spiflash.h"
-+
-+#define DRIVER_NAME "ar2315-spiflash"
-+
-+#define busy_wait(_priv, _condition, _wait) do { \
-+	while (_condition) { \
-+		if (_wait > 1) \
-+			msleep(_wait); \
-+		else if ((_wait == 1) && need_resched()) \
-+			schedule(); \
-+		else \
-+			udelay(1); \
-+	} \
-+} while (0)
-+
-+enum {
-+	FLASH_NONE,
-+	FLASH_1MB,
-+	FLASH_2MB,
-+	FLASH_4MB,
-+	FLASH_8MB,
-+	FLASH_16MB,
-+};
-+
-+/* Flash configuration table */
-+struct flashconfig {
-+	u32 byte_cnt;
-+	u32 sector_cnt;
-+	u32 sector_size;
-+};
-+
-+static const struct flashconfig flashconfig_tbl[] = {
-+	[FLASH_NONE] = { 0, 0, 0},
-+	[FLASH_1MB]  = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT,
-+			 STM_1MB_SECTOR_SIZE},
-+	[FLASH_2MB]  = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT,
-+			 STM_2MB_SECTOR_SIZE},
-+	[FLASH_4MB]  = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT,
-+			 STM_4MB_SECTOR_SIZE},
-+	[FLASH_8MB]  = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT,
-+			 STM_8MB_SECTOR_SIZE},
-+	[FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT,
-+			 STM_16MB_SECTOR_SIZE}
-+};
-+
-+/* Mapping of generic opcodes to STM serial flash opcodes */
-+enum {
-+	SPI_WRITE_ENABLE,
-+	SPI_WRITE_DISABLE,
-+	SPI_RD_STATUS,
-+	SPI_WR_STATUS,
-+	SPI_RD_DATA,
-+	SPI_FAST_RD_DATA,
-+	SPI_PAGE_PROGRAM,
-+	SPI_SECTOR_ERASE,
-+	SPI_BULK_ERASE,
-+	SPI_DEEP_PWRDOWN,
-+	SPI_RD_SIG,
-+};
-+
-+struct opcodes {
-+	__u16 code;
-+	__s8 tx_cnt;
-+	__s8 rx_cnt;
-+};
-+
-+static const struct opcodes stm_opcodes[] = {
-+	[SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
-+	[SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
-+	[SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
-+	[SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
-+	[SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
-+	[SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
-+	[SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
-+	[SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
-+	[SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
-+	[SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
-+	[SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
-+};
-+
-+/* Driver private data structure */
-+struct spiflash_priv {
-+	struct mtd_info mtd;
-+	void __iomem *readaddr; /* memory mapped data for read  */
-+	void __iomem *mmraddr;  /* memory mapped register space */
-+	struct mutex lock;	/* serialize registers access */
-+};
-+
-+#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
-+
-+enum {
-+	FL_READY,
-+	FL_READING,
-+	FL_ERASING,
-+	FL_WRITING
-+};
-+
-+/*****************************************************************************/
-+
-+static u32
-+spiflash_read_reg(struct spiflash_priv *priv, int reg)
-+{
-+	return ioread32(priv->mmraddr + reg);
-+}
-+
-+static void
-+spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
-+{
-+	iowrite32(data, priv->mmraddr + reg);
-+}
-+
-+static u32
-+spiflash_wait_busy(struct spiflash_priv *priv)
-+{
-+	u32 reg;
-+
-+	busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
-+		SPI_CTL_BUSY, 0);
-+	return reg;
-+}
-+
-+static u32
-+spiflash_sendcmd(struct spiflash_priv *priv, int opcode, u32 addr)
-+{
-+	const struct opcodes *op;
-+	u32 reg, mask;
-+
-+	op = &stm_opcodes[opcode];
-+	reg = spiflash_wait_busy(priv);
-+	spiflash_write_reg(priv, SPI_FLASH_OPCODE,
-+			   ((u32)op->code) | (addr << 8));
-+
-+	reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+	reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
-+
-+	spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+	spiflash_wait_busy(priv);
-+
-+	if (!op->rx_cnt)
-+		return 0;
-+
-+	reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
-+
-+	switch (op->rx_cnt) {
-+	case 1:
-+		mask = 0x000000ff;
-+		break;
-+	case 2:
-+		mask = 0x0000ffff;
-+		break;
-+	case 3:
-+		mask = 0x00ffffff;
-+		break;
-+	default:
-+		mask = 0xffffffff;
-+		break;
-+	}
-+	reg &= mask;
-+
-+	return reg;
-+}
-+
-+/*
-+ * Probe SPI flash device
-+ * Function returns 0 for failure.
-+ * and flashconfig_tbl array index for success.
-+ */
-+static int
-+spiflash_probe_chip(struct platform_device *pdev, struct spiflash_priv *priv)
-+{
-+	u32 sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
-+	int flash_size;
-+
-+	switch (sig) {
-+	case STM_8MBIT_SIGNATURE:
-+		flash_size = FLASH_1MB;
-+		break;
-+	case STM_16MBIT_SIGNATURE:
-+		flash_size = FLASH_2MB;
-+		break;
-+	case STM_32MBIT_SIGNATURE:
-+		flash_size = FLASH_4MB;
-+		break;
-+	case STM_64MBIT_SIGNATURE:
-+		flash_size = FLASH_8MB;
-+		break;
-+	case STM_128MBIT_SIGNATURE:
-+		flash_size = FLASH_16MB;
-+		break;
-+	default:
-+		dev_warn(&pdev->dev, "read of flash device signature failed!\n");
-+		return 0;
-+	}
-+
-+	return flash_size;
-+}
-+
-+static void
-+spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout)
-+{
-+	busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
-+		SPI_STATUS_WIP, timeout);
-+}
-+
-+static int
-+spiflash_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+	struct spiflash_priv *priv = to_spiflash(mtd);
-+	const struct opcodes *op;
-+	u32 temp, reg;
-+
-+	if (instr->addr + instr->len > mtd->size)
-+		return -EINVAL;
-+
-+	mutex_lock(&priv->lock);
-+
-+	spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+	reg = spiflash_wait_busy(priv);
-+
-+	op = &stm_opcodes[SPI_SECTOR_ERASE];
-+	temp = ((u32)instr->addr << 8) | (u32)(op->code);
-+	spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
-+
-+	reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+	reg |= op->tx_cnt | SPI_CTL_START;
-+	spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+	spiflash_wait_complete(priv, 20);
-+
-+	mutex_unlock(&priv->lock);
-+
-+	return 0;
-+}
-+
-+static int
-+spiflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
-+	      u_char *buf)
-+{
-+	struct spiflash_priv *priv = to_spiflash(mtd);
-+
-+	if (!len)
-+		return 0;
-+
-+	if (from + len > mtd->size)
-+		return -EINVAL;
-+
-+	*retlen = len;
-+
-+	mutex_lock(&priv->lock);
-+
-+	memcpy_fromio(buf, priv->readaddr + from, len);
-+
-+	mutex_unlock(&priv->lock);
-+
-+	return 0;
-+}
-+
-+static int
-+spiflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
-+	       const u8 *buf)
-+{
-+	struct spiflash_priv *priv = to_spiflash(mtd);
-+	u32 opcode, bytes_left;
-+
-+	*retlen = 0;
-+
-+	if (!len)
-+		return 0;
-+
-+	if (to + len > mtd->size)
-+		return -EINVAL;
-+
-+	bytes_left = len;
-+
-+	do {
-+		u32 read_len, reg, page_offset, spi_data = 0;
-+
-+		read_len = min(bytes_left, sizeof(u32));
-+
-+		/* 32-bit writes cannot span across a page boundary
-+		 * (256 bytes). This types of writes require two page
-+		 * program operations to handle it correctly. The STM part
-+		 * will write the overflow data to the beginning of the
-+		 * current page as opposed to the subsequent page.
-+		 */
-+		page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
-+
-+		if (page_offset > STM_PAGE_SIZE)
-+			read_len -= (page_offset - STM_PAGE_SIZE);
-+
-+		mutex_lock(&priv->lock);
-+
-+		spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+		spi_data = 0;
-+		switch (read_len) {
-+		case 4:
-+			spi_data |= buf[3] << 24;
-+			/* fall through */
-+		case 3:
-+			spi_data |= buf[2] << 16;
-+			/* fall through */
-+		case 2:
-+			spi_data |= buf[1] << 8;
-+			/* fall through */
-+		case 1:
-+			spi_data |= buf[0] & 0xff;
-+			break;
-+		default:
-+			break;
-+		}
-+
-+		spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
-+		opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
-+			(to & 0x00ffffff) << 8;
-+		spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
-+
-+		reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
-+		reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+		reg |= (read_len + 4) | SPI_CTL_START;
-+		spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+		spiflash_wait_complete(priv, 1);
-+
-+		mutex_unlock(&priv->lock);
-+
-+		bytes_left -= read_len;
-+		to += read_len;
-+		buf += read_len;
-+
-+		*retlen += read_len;
-+	} while (bytes_left != 0);
-+
-+	return 0;
-+}
-+
-+#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS
-+static const char * const part_probe_types[] = {
-+	"cmdlinepart", "RedBoot", "MyLoader", NULL
-+};
-+#endif
-+
-+static int
-+spiflash_probe(struct platform_device *pdev)
-+{
-+	struct spiflash_priv *priv;
-+	struct mtd_info *mtd;
-+	struct resource *res;
-+	int index;
-+	int result = 0;
-+
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	mutex_init(&priv->lock);
-+	mtd = &priv->mtd;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+	priv->mmraddr = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(priv->mmraddr)) {
-+		dev_warn(&pdev->dev, "failed to map flash MMR\n");
-+		return PTR_ERR(priv->mmraddr);
-+	}
-+
-+	index = spiflash_probe_chip(pdev, priv);
-+	if (!index) {
-+		dev_warn(&pdev->dev, "found no flash device\n");
-+		return -ENODEV;
-+	}
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	priv->readaddr = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(priv->readaddr)) {
-+		dev_warn(&pdev->dev, "failed to map flash read mem\n");
-+		return PTR_ERR(priv->readaddr);
-+	}
-+
-+	platform_set_drvdata(pdev, priv);
-+	mtd->name = "spiflash";
-+	mtd->type = MTD_NORFLASH;
-+	mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
-+	mtd->size = flashconfig_tbl[index].byte_cnt;
-+	mtd->erasesize = flashconfig_tbl[index].sector_size;
-+	mtd->writesize = 1;
-+	mtd->numeraseregions = 0;
-+	mtd->eraseregions = NULL;
-+	mtd->_erase = spiflash_erase;
-+	mtd->_read = spiflash_read;
-+	mtd->_write = spiflash_write;
-+	mtd->owner = THIS_MODULE;
-+
-+	dev_info(&pdev->dev, "%lld Kbytes flash detected\n", mtd->size >> 10);
-+
-+#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS
-+	/* parse redboot partitions */
-+
-+	result = mtd_device_parse_register(mtd, part_probe_types,
-+					   NULL, NULL, 0);
-+#endif
-+
-+	return result;
-+}
-+
-+static int
-+spiflash_remove(struct platform_device *pdev)
-+{
-+	struct spiflash_priv *priv = platform_get_drvdata(pdev);
-+
-+	mtd_device_unregister(&priv->mtd);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver spiflash_driver = {
-+	.driver.name = DRIVER_NAME,
-+	.probe = spiflash_probe,
-+	.remove = spiflash_remove,
-+};
-+
-+module_platform_driver(spiflash_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("OpenWrt.org");
-+MODULE_AUTHOR("Atheros Communications Inc");
-+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros AR2315+ SOC");
-+MODULE_ALIAS("platform:" DRIVER_NAME);
-+
---- /dev/null
-+++ b/drivers/mtd/devices/ar2315_spiflash.h
-@@ -0,0 +1,106 @@
-+/*
-+ * Atheros AR2315 SPI Flash Memory support header file.
-+ *
-+ * Copyright (c) 2005, Atheros Communications Inc.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __AR2315_SPIFLASH_H
-+#define __AR2315_SPIFLASH_H
-+
-+#define STM_PAGE_SIZE           256
-+
-+#define SFI_WRITE_BUFFER_SIZE   4
-+#define SFI_FLASH_ADDR_MASK     0x00ffffff
-+
-+#define STM_8MBIT_SIGNATURE     0x13
-+#define STM_M25P80_BYTE_COUNT   1048576
-+#define STM_M25P80_SECTOR_COUNT 16
-+#define STM_M25P80_SECTOR_SIZE  0x10000
-+
-+#define STM_16MBIT_SIGNATURE    0x14
-+#define STM_M25P16_BYTE_COUNT   2097152
-+#define STM_M25P16_SECTOR_COUNT 32
-+#define STM_M25P16_SECTOR_SIZE  0x10000
-+
-+#define STM_32MBIT_SIGNATURE    0x15
-+#define STM_M25P32_BYTE_COUNT   4194304
-+#define STM_M25P32_SECTOR_COUNT 64
-+#define STM_M25P32_SECTOR_SIZE  0x10000
-+
-+#define STM_64MBIT_SIGNATURE    0x16
-+#define STM_M25P64_BYTE_COUNT   8388608
-+#define STM_M25P64_SECTOR_COUNT 128
-+#define STM_M25P64_SECTOR_SIZE  0x10000
-+
-+#define STM_128MBIT_SIGNATURE   0x17
-+#define STM_M25P128_BYTE_COUNT   16777216
-+#define STM_M25P128_SECTOR_COUNT 256
-+#define STM_M25P128_SECTOR_SIZE  0x10000
-+
-+#define STM_1MB_BYTE_COUNT   STM_M25P80_BYTE_COUNT
-+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
-+#define STM_1MB_SECTOR_SIZE  STM_M25P80_SECTOR_SIZE
-+#define STM_2MB_BYTE_COUNT   STM_M25P16_BYTE_COUNT
-+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
-+#define STM_2MB_SECTOR_SIZE  STM_M25P16_SECTOR_SIZE
-+#define STM_4MB_BYTE_COUNT   STM_M25P32_BYTE_COUNT
-+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
-+#define STM_4MB_SECTOR_SIZE  STM_M25P32_SECTOR_SIZE
-+#define STM_8MB_BYTE_COUNT   STM_M25P64_BYTE_COUNT
-+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
-+#define STM_8MB_SECTOR_SIZE  STM_M25P64_SECTOR_SIZE
-+#define STM_16MB_BYTE_COUNT   STM_M25P128_BYTE_COUNT
-+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
-+#define STM_16MB_SECTOR_SIZE  STM_M25P128_SECTOR_SIZE
-+
-+/*
-+ * ST Microelectronics Opcodes for Serial Flash
-+ */
-+
-+#define STM_OP_WR_ENABLE       0x06     /* Write Enable */
-+#define STM_OP_WR_DISABLE      0x04     /* Write Disable */
-+#define STM_OP_RD_STATUS       0x05     /* Read Status */
-+#define STM_OP_WR_STATUS       0x01     /* Write Status */
-+#define STM_OP_RD_DATA         0x03     /* Read Data */
-+#define STM_OP_FAST_RD_DATA    0x0b     /* Fast Read Data */
-+#define STM_OP_PAGE_PGRM       0x02     /* Page Program */
-+#define STM_OP_SECTOR_ERASE    0xd8     /* Sector Erase */
-+#define STM_OP_BULK_ERASE      0xc7     /* Bulk Erase */
-+#define STM_OP_DEEP_PWRDOWN    0xb9     /* Deep Power-Down Mode */
-+#define STM_OP_RD_SIG          0xab     /* Read Electronic Signature */
-+
-+#define STM_STATUS_WIP       0x01       /* Write-In-Progress */
-+#define STM_STATUS_WEL       0x02       /* Write Enable Latch */
-+#define STM_STATUS_BP0       0x04       /* Block Protect 0 */
-+#define STM_STATUS_BP1       0x08       /* Block Protect 1 */
-+#define STM_STATUS_BP2       0x10       /* Block Protect 2 */
-+#define STM_STATUS_SRWD      0x80       /* Status Register Write Disable */
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+
-+#define SPI_FLASH_CTL           0x00
-+#define SPI_FLASH_OPCODE        0x04
-+#define SPI_FLASH_DATA          0x08
-+
-+#define SPI_CTL_START           0x00000100
-+#define SPI_CTL_BUSY            0x00010000
-+#define SPI_CTL_TXCNT_MASK      0x0000000f
-+#define SPI_CTL_RXCNT_MASK      0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
-+#define SPI_CTL_SIZE_MASK       0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK    0x03000000
-+#define SPI_OPCODE_MASK         0x000000ff
-+
-+#define SPI_STATUS_WIP		STM_STATUS_WIP
-+
-+#endif
---- a/arch/mips/ath25/ar2315.c
-+++ b/arch/mips/ath25/ar2315.c
-@@ -218,6 +218,28 @@ static struct platform_device ar2315_gpi
- 	.num_resources = ARRAY_SIZE(ar2315_gpio_res)
- };
- 
-+static struct resource ar2315_spiflash_res[] = {
-+	{
-+		.name = "spiflash_read",
-+		.flags = IORESOURCE_MEM,
-+		.start = AR2315_SPI_READ_BASE,
-+		.end = AR2315_SPI_READ_BASE + AR2315_SPI_READ_SIZE - 1,
-+	},
-+	{
-+		.name = "spiflash_mmr",
-+		.flags = IORESOURCE_MEM,
-+		.start = AR2315_SPI_MMR_BASE,
-+		.end = AR2315_SPI_MMR_BASE + AR2315_SPI_MMR_SIZE - 1,
-+	},
-+};
-+
-+static struct platform_device ar2315_spiflash = {
-+	.id = 0,
-+	.name = "ar2315-spiflash",
-+	.resource = ar2315_spiflash_res,
-+	.num_resources = ARRAY_SIZE(ar2315_spiflash_res)
-+};
-+
- void __init ar2315_init_devices(void)
- {
- 	/* Find board configuration */
-@@ -228,6 +250,8 @@ void __init ar2315_init_devices(void)
- 	ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
- 	platform_device_register(&ar2315_gpio);
- 
-+	platform_device_register(&ar2315_spiflash);
-+
- 	ar2315_eth_data.macaddr = ath25_board.config->enet0_mac;
- 	ath25_add_ethernet(0, AR2315_ENET0_BASE, "eth0_mii",
- 			   AR2315_ENET0_MII_BASE, AR2315_IRQ_ENET0,
diff --git a/target/linux/ath25/patches-5.10/130-watchdog.patch b/target/linux/ath25/patches-5.10/130-watchdog.patch
deleted file mode 100644
index 1c8c9a9677ee..000000000000
--- a/target/linux/ath25/patches-5.10/130-watchdog.patch
+++ /dev/null
@@ -1,277 +0,0 @@
---- /dev/null
-+++ b/drivers/watchdog/ar2315-wtd.c
-@@ -0,0 +1,209 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
-+ *
-+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
-+ * Based on EP93xx and ifxmips wdt driver
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/fs.h>
-+#include <linux/ioport.h>
-+#include <linux/notifier.h>
-+#include <linux/reboot.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/uaccess.h>
-+
-+#define DRIVER_NAME	"ar2315-wdt"
-+
-+#define CLOCK_RATE 40000000
-+#define HEARTBEAT(x) (x < 1 || x > 90 ? 20 : x)
-+
-+#define WDT_REG_TIMER		0x00
-+#define WDT_REG_CTRL		0x04
-+
-+#define WDT_CTRL_ACT_NONE	0x00000000	/* No action */
-+#define WDT_CTRL_ACT_NMI	0x00000001	/* NMI on watchdog */
-+#define WDT_CTRL_ACT_RESET	0x00000002	/* reset on watchdog */
-+
-+static int wdt_timeout = 20;
-+static int started;
-+static int in_use;
-+static void __iomem *wdt_base;
-+
-+static inline void ar2315_wdt_wr(unsigned reg, u32 val)
-+{
-+	iowrite32(val, wdt_base + reg);
-+}
-+
-+static void
-+ar2315_wdt_enable(void)
-+{
-+	ar2315_wdt_wr(WDT_REG_TIMER, wdt_timeout * CLOCK_RATE);
-+}
-+
-+static ssize_t
-+ar2315_wdt_write(struct file *file, const char __user *data, size_t len,
-+		 loff_t *ppos)
-+{
-+	if (len)
-+		ar2315_wdt_enable();
-+	return len;
-+}
-+
-+static int
-+ar2315_wdt_open(struct inode *inode, struct file *file)
-+{
-+	if (in_use)
-+		return -EBUSY;
-+	ar2315_wdt_enable();
-+	in_use = 1;
-+	started = 1;
-+	return nonseekable_open(inode, file);
-+}
-+
-+static int
-+ar2315_wdt_release(struct inode *inode, struct file *file)
-+{
-+	in_use = 0;
-+	return 0;
-+}
-+
-+static irqreturn_t
-+ar2315_wdt_interrupt(int irq, void *dev)
-+{
-+	struct platform_device *pdev = (struct platform_device *)dev;
-+
-+	if (started) {
-+		dev_crit(&pdev->dev, "watchdog expired, rebooting system\n");
-+		emergency_restart();
-+	} else {
-+		ar2315_wdt_wr(WDT_REG_CTRL, 0);
-+		ar2315_wdt_wr(WDT_REG_TIMER, 0);
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+static struct watchdog_info ident = {
-+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+	.identity = "ar2315 Watchdog",
-+};
-+
-+static long
-+ar2315_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+	int new_wdt_timeout;
-+	int ret = -ENOIOCTLCMD;
-+
-+	switch (cmd) {
-+	case WDIOC_GETSUPPORT:
-+		ret = copy_to_user((void __user *)arg, &ident, sizeof(ident)) ?
-+		      -EFAULT : 0;
-+		break;
-+	case WDIOC_KEEPALIVE:
-+		ar2315_wdt_enable();
-+		ret = 0;
-+		break;
-+	case WDIOC_SETTIMEOUT:
-+		ret = get_user(new_wdt_timeout, (int __user *)arg);
-+		if (ret)
-+			break;
-+		wdt_timeout = HEARTBEAT(new_wdt_timeout);
-+		ar2315_wdt_enable();
-+		break;
-+	case WDIOC_GETTIMEOUT:
-+		ret = put_user(wdt_timeout, (int __user *)arg);
-+		break;
-+	}
-+	return ret;
-+}
-+
-+static const struct file_operations ar2315_wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.write		= ar2315_wdt_write,
-+	.unlocked_ioctl	= ar2315_wdt_ioctl,
-+	.open		= ar2315_wdt_open,
-+	.release	= ar2315_wdt_release,
-+};
-+
-+static struct miscdevice ar2315_wdt_miscdev = {
-+	.minor	= WATCHDOG_MINOR,
-+	.name	= "watchdog",
-+	.fops	= &ar2315_wdt_fops,
-+};
-+
-+static int
-+ar2315_wdt_probe(struct platform_device *dev)
-+{
-+	struct resource *mem_res, *irq_res;
-+	int ret = 0;
-+
-+	if (wdt_base)
-+		return -EBUSY;
-+
-+	irq_res = platform_get_resource(dev, IORESOURCE_IRQ, 0);
-+	if (!irq_res) {
-+		dev_err(&dev->dev, "no IRQ resource\n");
-+		return -ENOENT;
-+	}
-+
-+	mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-+	wdt_base = devm_ioremap_resource(&dev->dev, mem_res);
-+	if (IS_ERR(wdt_base))
-+		return PTR_ERR(wdt_base);
-+
-+	ret = devm_request_irq(&dev->dev, irq_res->start, ar2315_wdt_interrupt,
-+			       0, DRIVER_NAME, dev);
-+	if (ret) {
-+		dev_err(&dev->dev, "failed to register inetrrupt\n");
-+		goto out;
-+	}
-+
-+	ret = misc_register(&ar2315_wdt_miscdev);
-+	if (ret)
-+		dev_err(&dev->dev, "failed to register miscdev\n");
-+
-+out:
-+	return ret;
-+}
-+
-+static int
-+ar2315_wdt_remove(struct platform_device *dev)
-+{
-+	misc_deregister(&ar2315_wdt_miscdev);
-+	return 0;
-+}
-+
-+static struct platform_driver ar2315_wdt_driver = {
-+	.probe = ar2315_wdt_probe,
-+	.remove = ar2315_wdt_remove,
-+	.driver = {
-+		.name = DRIVER_NAME,
-+		.owner = THIS_MODULE,
-+	},
-+};
-+
-+module_platform_driver(ar2315_wdt_driver);
-+
-+MODULE_DESCRIPTION("Atheros AR2315 hardware watchdog driver");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:" DRIVER_NAME);
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1873,6 +1873,13 @@ config PIC32_DMT
- 	  To compile this driver as a loadable module, choose M here.
- 	  The module will be called pic32-dmt.
- 
-+config AR2315_WDT
-+	tristate "Atheros AR2315+ WiSoCs Watchdog Timer"
-+	depends on ATH25
-+	help
-+	  Hardware driver for the built-in watchdog timer on the Atheros
-+	  AR2315/AR2316 WiSoCs.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -164,6 +164,7 @@ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
-+obj-$(CONFIG_AR2315_WDT) += ar2315-wtd.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
---- a/arch/mips/ath25/ar2315.c
-+++ b/arch/mips/ath25/ar2315.c
-@@ -218,6 +218,24 @@ static struct platform_device ar2315_gpi
- 	.num_resources = ARRAY_SIZE(ar2315_gpio_res)
- };
- 
-+static struct resource ar2315_wdt_res[] = {
-+	{
-+		.flags = IORESOURCE_MEM,
-+		.start = AR2315_RST_BASE + AR2315_WDT_TIMER,
-+		.end = AR2315_RST_BASE + AR2315_WDT_TIMER + 8 - 1,
-+	},
-+	{
-+		.flags = IORESOURCE_IRQ,
-+	}
-+};
-+
-+static struct platform_device ar2315_wdt = {
-+	.id = 0,
-+	.name = "ar2315-wdt",
-+	.resource = ar2315_wdt_res,
-+	.num_resources = ARRAY_SIZE(ar2315_wdt_res)
-+};
-+
- static struct resource ar2315_spiflash_res[] = {
- 	{
- 		.name = "spiflash_read",
-@@ -250,6 +268,11 @@ void __init ar2315_init_devices(void)
- 	ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
- 	platform_device_register(&ar2315_gpio);
- 
-+	ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
-+						     AR2315_MISC_IRQ_WATCHDOG);
-+	ar2315_wdt_res[1].end = ar2315_wdt_res[1].start;
-+	platform_device_register(&ar2315_wdt);
-+
- 	platform_device_register(&ar2315_spiflash);
- 
- 	ar2315_eth_data.macaddr = ath25_board.config->enet0_mac;
diff --git a/target/linux/ath25/patches-5.10/140-redboot_boardconfig.patch b/target/linux/ath25/patches-5.10/140-redboot_boardconfig.patch
deleted file mode 100644
index 07d75b9fbae6..000000000000
--- a/target/linux/ath25/patches-5.10/140-redboot_boardconfig.patch
+++ /dev/null
@@ -1,60 +0,0 @@
---- a/drivers/mtd/parsers/redboot.c
-+++ b/drivers/mtd/parsers/redboot.c
-@@ -16,6 +16,8 @@
- #include <linux/mtd/partitions.h>
- #include <linux/module.h>
- 
-+#define BOARD_CONFIG_PART		"boardconfig"
-+
- struct fis_image_desc {
-     unsigned char name[16];      // Null terminated name
-     uint32_t	  flash_base;    // Address within FLASH of image
-@@ -73,6 +75,7 @@ static int parse_redboot_partitions(stru
- 				    const struct mtd_partition **pparts,
- 				    struct mtd_part_parser_data *data)
- {
-+	unsigned long max_offset = 0;
- 	int nrparts = 0;
- 	struct fis_image_desc *buf;
- 	struct mtd_partition *parts;
-@@ -240,14 +243,15 @@ static int parse_redboot_partitions(stru
- 		}
- 	}
- #endif
--	parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
-+	parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen +
-+			sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
- 
- 	if (!parts) {
- 		ret = -ENOMEM;
- 		goto out;
- 	}
- 
--	nullname = (char *)&parts[nrparts];
-+	nullname = (char *)&parts[nrparts + 1];
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 	if (nulllen > 0) {
- 		strcpy(nullname, nullstring);
-@@ -266,6 +270,8 @@ static int parse_redboot_partitions(stru
- 	}
- #endif
- 	for ( ; i<nrparts; i++) {
-+		if (max_offset < buf[i].flash_base + buf[i].size)
-+			max_offset = buf[i].flash_base + buf[i].size;
- 		parts[i].size = fl->img->size;
- 		parts[i].offset = fl->img->flash_base;
- 		parts[i].name = names;
-@@ -299,6 +305,13 @@ static int parse_redboot_partitions(stru
- 		fl = fl->next;
- 		kfree(tmp_fl);
- 	}
-+	if (master->size - max_offset >= master->erasesize) {
-+		parts[nrparts].size = master->size - max_offset;
-+		parts[nrparts].offset = max_offset;
-+		parts[nrparts].name = names;
-+		strcpy(names, BOARD_CONFIG_PART);
-+		nrparts++;
-+	}
- 	ret = nrparts;
- 	*pparts = parts;
-  out:
diff --git a/target/linux/ath25/patches-5.10/141-redboot_partition_scan.patch b/target/linux/ath25/patches-5.10/141-redboot_partition_scan.patch
deleted file mode 100644
index 68019f90eaad..000000000000
--- a/target/linux/ath25/patches-5.10/141-redboot_partition_scan.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/drivers/mtd/parsers/redboot.c
-+++ b/drivers/mtd/parsers/redboot.c
-@@ -94,12 +94,18 @@ static int parse_redboot_partitions(stru
- 
- 	parse_redboot_of(master);
- 
-+	buf = vmalloc(master->erasesize);
-+	if (!buf)
-+		return -ENOMEM;
-+
-+ restart:
- 	if ( directory < 0 ) {
- 		offset = master->size + directory * master->erasesize;
- 		while (mtd_block_isbad(master, offset)) {
- 			if (!offset) {
- 			nogood:
- 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+				vfree(buf);
- 				return -EIO;
- 			}
- 			offset -= master->erasesize;
-@@ -112,10 +118,6 @@ static int parse_redboot_partitions(stru
- 				goto nogood;
- 		}
- 	}
--	buf = vmalloc(master->erasesize);
--
--	if (!buf)
--		return -ENOMEM;
- 
- 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- 	       master->name, offset);
-@@ -188,6 +190,11 @@ static int parse_redboot_partitions(stru
- 	}
- 	if (i == numslots) {
- 		/* Didn't find it */
-+		if (offset + master->erasesize < master->size) {
-+			/* not at the end of the flash yet, maybe next block */
-+			directory++;
-+			goto restart;
-+		}
- 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- 		       master->name);
- 		ret = 0;
diff --git a/target/linux/ath25/patches-5.10/142-redboot_various_erase_size_fix.patch b/target/linux/ath25/patches-5.10/142-redboot_various_erase_size_fix.patch
deleted file mode 100644
index c3b73eabe967..000000000000
--- a/target/linux/ath25/patches-5.10/142-redboot_various_erase_size_fix.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/drivers/mtd/parsers/redboot.c
-+++ b/drivers/mtd/parsers/redboot.c
-@@ -71,6 +71,22 @@ static void parse_redboot_of(struct mtd_
- 	directory = dirblock;
- }
- 
-+static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset)
-+{
-+	struct mtd_erase_region_info *regions = mtd->eraseregions;
-+	int i;
-+
-+	for (i = 0; i < mtd->numeraseregions; i++) {
-+		if (regions[i].offset +
-+		    regions[i].numblocks * regions[i].erasesize <= offset)
-+			continue;
-+
-+		return regions[i].erasesize;
-+	}
-+
-+	return mtd->erasesize;
-+}
-+
- static int parse_redboot_partitions(struct mtd_info *master,
- 				    const struct mtd_partition **pparts,
- 				    struct mtd_part_parser_data *data)
-@@ -87,6 +103,7 @@ static int parse_redboot_partitions(stru
- 	int namelen = 0;
- 	int nulllen = 0;
- 	int numslots;
-+	int first_slot;
- 	unsigned long offset;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 	static char nullstring[] = "unallocated";
-@@ -201,7 +218,10 @@ static int parse_redboot_partitions(stru
- 		goto out;
- 	}
- 
--	for (i = 0; i < numslots; i++) {
-+	first_slot = (buf[i].flash_base & (master->erasesize - 1)) /
-+		     sizeof(struct fis_image_desc);
-+
-+	for (i = first_slot; i < first_slot + numslots; i++) {
- 		struct fis_list *new_fl, **prev;
- 
- 		if (buf[i].name[0] == 0xff) {
-@@ -277,12 +297,13 @@ static int parse_redboot_partitions(stru
- 	}
- #endif
- 	for ( ; i<nrparts; i++) {
--		if (max_offset < buf[i].flash_base + buf[i].size)
--			max_offset = buf[i].flash_base + buf[i].size;
- 		parts[i].size = fl->img->size;
- 		parts[i].offset = fl->img->flash_base;
- 		parts[i].name = names;
- 
-+		if (max_offset < parts[i].offset + parts[i].size)
-+			max_offset = parts[i].offset + parts[i].size;
-+
- 		strcpy(names, fl->img->name);
- #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY
- 		if (!memcmp(names, "RedBoot", 8) ||
-@@ -312,7 +333,9 @@ static int parse_redboot_partitions(stru
- 		fl = fl->next;
- 		kfree(tmp_fl);
- 	}
--	if (master->size - max_offset >= master->erasesize) {
-+
-+	if (master->size - max_offset >=
-+	    mtd_get_offset_erasesize(master, max_offset)) {
- 		parts[nrparts].size = master->size - max_offset;
- 		parts[nrparts].offset = max_offset;
- 		parts[nrparts].name = names;
diff --git a/target/linux/ath25/patches-5.10/210-reset_button.patch b/target/linux/ath25/patches-5.10/210-reset_button.patch
deleted file mode 100644
index b3f7a14cda68..000000000000
--- a/target/linux/ath25/patches-5.10/210-reset_button.patch
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/ath25/Makefile
-+++ b/arch/mips/ath25/Makefile
-@@ -8,7 +8,7 @@
- # Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
- #
- 
--obj-y += board.o prom.o devices.o
-+obj-y += board.o prom.o devices.o reset.o
- 
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
- 
---- /dev/null
-+++ b/arch/mips/ath25/reset.c
-@@ -0,0 +1,57 @@
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <ath25_platform.h>
-+#include "devices.h"
-+
-+static int __init
-+ar231x_init_reset(void)
-+{
-+	struct platform_device *pdev;
-+	struct gpio_keys_platform_data pdata;
-+	struct gpio_keys_button *p;
-+	int err;
-+
-+	if (ath25_board.config->reset_config_gpio == 0xffff)
-+		return -ENODEV;
-+
-+	p = kzalloc(sizeof(*p), GFP_KERNEL);
-+	if (!p)
-+		goto err;
-+
-+	p->desc = "reset";
-+	p->type = EV_KEY;
-+	p->code = KEY_RESTART;
-+	p->debounce_interval = 60;
-+	p->gpio = ath25_board.config->reset_config_gpio;
-+
-+	memset(&pdata, 0, sizeof(pdata));
-+	pdata.poll_interval = 20;
-+	pdata.buttons = p;
-+	pdata.nbuttons = 1;
-+
-+	pdev = platform_device_alloc("gpio-keys-polled", 0);
-+	if (!pdev)
-+		goto err_free;
-+
-+	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
-+	if (err)
-+		goto err_put_pdev;
-+
-+	err = platform_device_add(pdev);
-+	if (err)
-+		goto err_put_pdev;
-+
-+	return 0;
-+
-+err_put_pdev:
-+	platform_device_put(pdev);
-+err_free:
-+	kfree(p);
-+err:
-+	return -ENOMEM;
-+}
-+
-+device_initcall(ar231x_init_reset);
diff --git a/target/linux/ath25/patches-5.10/220-enet_micrel_workaround.patch b/target/linux/ath25/patches-5.10/220-enet_micrel_workaround.patch
deleted file mode 100644
index 2bd081563172..000000000000
--- a/target/linux/ath25/patches-5.10/220-enet_micrel_workaround.patch
+++ /dev/null
@@ -1,111 +0,0 @@
---- a/drivers/net/ethernet/atheros/ar231x/ar231x.c
-+++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c
-@@ -135,6 +135,7 @@ static int ar231x_mdiobus_write(struct m
- static int ar231x_mdiobus_reset(struct mii_bus *bus);
- static int ar231x_mdiobus_probe(struct net_device *dev);
- static void ar231x_adjust_link(struct net_device *dev);
-+static bool no_phy;
- 
- #ifndef ERR
- #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-@@ -166,6 +167,32 @@ static const struct net_device_ops ar231
- #endif
- };
- 
-+static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id)
-+{
-+	int phy_reg;
-+
-+	/**
-+	 * Grab the bits from PHYIR1, and put them
-+	 * in the upper half.
-+	 */
-+	phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
-+
-+	if (phy_reg < 0)
-+		return -EIO;
-+
-+	*phy_id = (phy_reg & 0xffff) << 16;
-+
-+	/* Grab the bits from PHYIR2, and put them in the lower half */
-+	phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
-+
-+	if (phy_reg < 0)
-+		return -EIO;
-+
-+	*phy_id |= (phy_reg & 0xffff);
-+
-+	return 0;
-+}
-+
- static int ar231x_probe(struct platform_device *pdev)
- {
- 	struct net_device *dev;
-@@ -273,6 +300,24 @@ static int ar231x_probe(struct platform_
- 
- 	mdiobus_register(sp->mii_bus);
- 
-+	/**
-+	 * Workaround for Micrel switch, which is only available on
-+	 * one PHY and cannot be configured through MDIO.
-+	 */
-+	if (!no_phy) {
-+		u32 phy_id = 0;
-+
-+		get_phy_id(sp->mii_bus, 1, &phy_id);
-+		if (phy_id == 0x00221450)
-+			no_phy = true;
-+	}
-+	if (no_phy) {
-+		sp->link = 1;
-+		netif_carrier_on(dev);
-+		return 0;
-+	}
-+	no_phy = true;
-+
- 	if (ar231x_mdiobus_probe(dev) != 0) {
- 		printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
- 		rx_tasklet_cleanup(dev);
-@@ -326,8 +371,10 @@ static int ar231x_remove(struct platform
- 	rx_tasklet_cleanup(dev);
- 	ar231x_init_cleanup(dev);
- 	unregister_netdev(dev);
--	mdiobus_unregister(sp->mii_bus);
--	mdiobus_free(sp->mii_bus);
-+	if (sp->mii_bus) {
-+		mdiobus_unregister(sp->mii_bus);
-+		mdiobus_free(sp->mii_bus);
-+	}
- 	kfree(dev);
- 	return 0;
- }
-@@ -870,7 +917,8 @@ static int ar231x_open(struct net_device
- 
- 	sp->eth_regs->mac_control |= MAC_CONTROL_RE;
- 
--	phy_start(sp->phy_dev);
-+	if (sp->phy_dev)
-+		phy_start(sp->phy_dev);
- 
- 	return 0;
- }
-@@ -951,7 +999,8 @@ static int ar231x_close(struct net_devic
- 
- #endif
- 
--	phy_stop(sp->phy_dev);
-+	if (sp->phy_dev)
-+		phy_stop(sp->phy_dev);
- 
- 	return 0;
- }
-@@ -995,6 +1044,9 @@ static int ar231x_ioctl(struct net_devic
- {
- 	struct ar231x_private *sp = netdev_priv(dev);
- 
-+	if (!sp->phy_dev)
-+		return -ENODEV;
-+
- 	switch (cmd) {
- 	case SIOCGMIIPHY:
- 	case SIOCGMIIREG:
diff --git a/target/linux/ath25/patches-5.10/330-board_leds.patch b/target/linux/ath25/patches-5.10/330-board_leds.patch
deleted file mode 100644
index a683d01111b9..000000000000
--- a/target/linux/ath25/patches-5.10/330-board_leds.patch
+++ /dev/null
@@ -1,116 +0,0 @@
---- a/arch/mips/ath25/ar2315.c
-+++ b/arch/mips/ath25/ar2315.c
-@@ -24,6 +24,7 @@
- #include <linux/reboot.h>
- #include <linux/delay.h>
- #include <linux/gpio.h>
-+#include <linux/leds.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-@@ -258,6 +259,50 @@ static struct platform_device ar2315_spi
- 	.num_resources = ARRAY_SIZE(ar2315_spiflash_res)
- };
- 
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar2315_leds[6];
-+static struct gpio_led_platform_data ar2315_led_data = {
-+	.leds = (void *)ar2315_leds,
-+};
-+
-+static struct platform_device ar2315_gpio_leds = {
-+	.name = "leds-gpio",
-+	.id = -1,
-+	.dev = {
-+		.platform_data = (void *)&ar2315_led_data,
-+	}
-+};
-+
-+static void __init ar2315_init_gpio_leds(void)
-+{
-+	static char led_names[6][6];
-+	int i, led = 0;
-+
-+	ar2315_led_data.num_leds = 0;
-+	for (i = 1; i < 8; i++) {
-+		if ((i == AR2315_RESET_GPIO) ||
-+		    (i == ath25_board.config->reset_config_gpio))
-+			continue;
-+
-+		if (i == ath25_board.config->sys_led_gpio)
-+			strcpy(led_names[led], "wlan");
-+		else
-+			sprintf(led_names[led], "gpio%d", i);
-+
-+		ar2315_leds[led].name = led_names[led];
-+		ar2315_leds[led].gpio = i;
-+		ar2315_leds[led].active_low = 0;
-+		led++;
-+	}
-+	ar2315_led_data.num_leds = led;
-+	platform_device_register(&ar2315_gpio_leds);
-+}
-+#else
-+static inline void ar2315_init_gpio_leds(void)
-+{
-+}
-+#endif
-+
- void __init ar2315_init_devices(void)
- {
- 	/* Find board configuration */
-@@ -268,6 +313,8 @@ void __init ar2315_init_devices(void)
- 	ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
- 	platform_device_register(&ar2315_gpio);
- 
-+	ar2315_init_gpio_leds();
-+
- 	ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
- 						     AR2315_MISC_IRQ_WATCHDOG);
- 	ar2315_wdt_res[1].end = ar2315_wdt_res[1].start;
---- a/arch/mips/ath25/ar5312.c
-+++ b/arch/mips/ath25/ar5312.c
-@@ -24,6 +24,7 @@
- #include <linux/mtd/physmap.h>
- #include <linux/reboot.h>
- #include <linux/gpio.h>
-+#include <linux/leds.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-@@ -229,6 +230,23 @@ static struct platform_device ar5312_gpi
- 	.num_resources = ARRAY_SIZE(ar5312_gpio_res),
- };
- 
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar5312_leds[] = {
-+	{ .name = "wlan", .gpio = 0, .active_low = 1, },
-+};
-+
-+static const struct gpio_led_platform_data ar5312_led_data = {
-+	.num_leds = ARRAY_SIZE(ar5312_leds),
-+	.leds = (void *)ar5312_leds,
-+};
-+
-+static struct platform_device ar5312_gpio_leds = {
-+	.name = "leds-gpio",
-+	.id = -1,
-+	.dev.platform_data = (void *)&ar5312_led_data,
-+};
-+#endif
-+
- static void __init ar5312_flash_init(void)
- {
- 	void __iomem *flashctl_base;
-@@ -299,6 +317,11 @@ void __init ar5312_init_devices(void)
- 
- 	platform_device_register(&ar5312_gpio);
- 
-+#ifdef CONFIG_LEDS_GPIO
-+	ar5312_leds[0].gpio = config->sys_led_gpio;
-+	platform_device_register(&ar5312_gpio_leds);
-+#endif
-+
- 	/* Fix up MAC addresses if necessary */
- 	if (is_broadcast_ether_addr(config->enet0_mac))
- 		ether_addr_copy(config->enet0_mac, config->enet1_mac);
diff --git a/target/linux/ath25/patches-5.10/700-swconfig_mvswitch.patch b/target/linux/ath25/patches-5.10/700-swconfig_mvswitch.patch
deleted file mode 100644
index 79a4d1c1a030..000000000000
--- a/target/linux/ath25/patches-5.10/700-swconfig_mvswitch.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -95,6 +95,10 @@ config IP17XX_PHY
- 	tristate "Driver for IC+ IP17xx switches"
- 	select SWCONFIG
- 
-+config MVSWITCH_PHY
-+	tristate "Driver for Marvell 88E6060 switches"
-+	select ETHERNET_PACKET_MANGLE
-+
- config PSB6970_PHY
- 	tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
- 	select SWCONFIG
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -31,6 +31,7 @@ ar8xxx-y			+= ar8216.o
- ar8xxx-y			+= ar8327.o
- obj-$(CONFIG_SWCONFIG_B53)	+= b53/
- obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
-+obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
- obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
- obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
- obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
diff --git a/target/linux/ath79/config-5.10 b/target/linux/ath79/config-5.10
deleted file mode 100644
index 04eec4375f0a..000000000000
--- a/target/linux/ath79/config-5.10
+++ /dev/null
@@ -1,203 +0,0 @@
-CONFIG_AG71XX=y
-# CONFIG_AG71XX_DEBUG is not set
-CONFIG_AG71XX_DEBUG_FS=y
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_AT803X_PHY=y
-CONFIG_ATH79=y
-CONFIG_ATH79_WDT=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_BLAKE2S=y
-# CONFIG_CRYPTO_CHACHA_MIPS is not set
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-# CONFIG_CRYPTO_POLY1305_MIPS is not set
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_ATH79=y
-CONFIG_GPIO_GENERIC=y
-# CONFIG_GPIO_LATCH is not set
-# CONFIG_GPIO_RB91X_KEY is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_RESET is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MEMFD_CREATE=y
-# CONFIG_MFD_RB4XX_CPLD is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-# CONFIG_MIPS_GENERIC_KERNEL is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_PARSER_CYBERTAN=y
-# CONFIG_MTD_PARSER_TPLINK_SAFELOADER is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_ELF_FW=y
-CONFIG_MTD_SPLIT_LZMA_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_MTD_VIRT_CONCAT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI=y
-CONFIG_PCI_AR71XX=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_AR7100_USB is not set
-# CONFIG_PHY_AR7200_USB is not set
-# CONFIG_PHY_ATH79_USB is not set
-CONFIG_PINCTRL=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_RESET_ATH79=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_AR933X=y
-CONFIG_SERIAL_AR933X_CONSOLE=y
-CONFIG_SERIAL_AR933X_NR_UARTS=2
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SPI=y
-CONFIG_SPI_AR934X=y
-CONFIG_SPI_ATH79=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_RB4XX is not set
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
diff --git a/target/linux/ath79/patches-5.10/0003-leds-add-reset-controller-based-driver.patch b/target/linux/ath79/patches-5.10/0003-leds-add-reset-controller-based-driver.patch
deleted file mode 100644
index 4a721f2af26a..000000000000
--- a/target/linux/ath79/patches-5.10/0003-leds-add-reset-controller-based-driver.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From ecbd9c87f073f097d9fe56390353e64e963e866a Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:03:03 +0100
-Subject: [PATCH 03/27] leds: add reset-controller based driver
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/leds/Kconfig      |  11 ++++
- drivers/leds/Makefile     |   1 +
- drivers/leds/leds-reset.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 149 insertions(+)
- create mode 100644 drivers/leds/leds-reset.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -931,6 +931,17 @@ config LEDS_ACER_A500
- 
- source "drivers/leds/blink/Kconfig"
- 
-+config LEDS_RESET
-+	tristate "LED support for reset-controller API"
-+	depends on LEDS_CLASS
-+	depends on RESET_CONTROLLER
-+	help
-+	  This option enables support for LEDs connected to pins driven by reset
-+	  controllers. Yes, DNI actual built HW like that.
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called leds-reset.
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
- 
---- /dev/null
-+++ b/drivers/leds/leds-reset.c
-@@ -0,0 +1,140 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/err.h>
-+#include <linux/reset.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+
-+struct reset_led_data {
-+	struct led_classdev cdev;
-+	struct reset_control *rst;
-+};
-+
-+static inline struct reset_led_data *
-+			cdev_to_reset_led_data(struct led_classdev *led_cdev)
-+{
-+	return container_of(led_cdev, struct reset_led_data, cdev);
-+}
-+
-+static void reset_led_set(struct led_classdev *led_cdev,
-+	enum led_brightness value)
-+{
-+	struct reset_led_data *led_dat = cdev_to_reset_led_data(led_cdev);
-+
-+	if (value == LED_OFF)
-+		reset_control_assert(led_dat->rst);
-+	else
-+		reset_control_deassert(led_dat->rst);
-+}
-+
-+struct reset_leds_priv {
-+	int num_leds;
-+	struct reset_led_data leds[];
-+};
-+
-+static inline int sizeof_reset_leds_priv(int num_leds)
-+{
-+	return sizeof(struct reset_leds_priv) +
-+		(sizeof(struct reset_led_data) * num_leds);
-+}
-+
-+static struct reset_leds_priv *reset_leds_create(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct fwnode_handle *child;
-+	struct reset_leds_priv *priv;
-+	int count, ret;
-+
-+	count = device_get_child_node_count(dev);
-+	if (!count)
-+		return ERR_PTR(-ENODEV);
-+
-+	priv = devm_kzalloc(dev, sizeof_reset_leds_priv(count), GFP_KERNEL);
-+	if (!priv)
-+		return ERR_PTR(-ENOMEM);
-+
-+	device_for_each_child_node(dev, child) {
-+		struct reset_led_data *led = &priv->leds[priv->num_leds];
-+		struct device_node *np = to_of_node(child);
-+
-+		ret = fwnode_property_read_string(child, "label", &led->cdev.name);
-+		if (!led->cdev.name) {
-+			fwnode_handle_put(child);
-+			return ERR_PTR(-EINVAL);
-+		}
-+		led->rst = __of_reset_control_get(np, NULL, 0, 0, 0, true);
-+		if (IS_ERR(led->rst))
-+			return ERR_PTR(-EINVAL);
-+
-+		fwnode_property_read_string(child, "linux,default-trigger",
-+						&led->cdev.default_trigger);
-+
-+		led->cdev.brightness_set = reset_led_set;
-+		ret = devm_led_classdev_register(&pdev->dev, &led->cdev);
-+		if (ret < 0)
-+			return ERR_PTR(ret);
-+		led->cdev.dev->of_node = np;
-+		priv->num_leds++;
-+	}
-+
-+	return priv;
-+}
-+
-+static const struct of_device_id of_reset_leds_match[] = {
-+	{ .compatible = "reset-leds", },
-+	{},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_reset_leds_match);
-+
-+static int reset_led_probe(struct platform_device *pdev)
-+{
-+	struct reset_leds_priv *priv;
-+
-+	priv = reset_leds_create(pdev);
-+	if (IS_ERR(priv))
-+		return PTR_ERR(priv);
-+
-+	platform_set_drvdata(pdev, priv);
-+
-+	return 0;
-+}
-+
-+static void reset_led_shutdown(struct platform_device *pdev)
-+{
-+	struct reset_leds_priv *priv = platform_get_drvdata(pdev);
-+	int i;
-+
-+	for (i = 0; i < priv->num_leds; i++) {
-+		struct reset_led_data *led = &priv->leds[i];
-+
-+		if (!(led->cdev.flags & LED_RETAIN_AT_SHUTDOWN))
-+			reset_led_set(&led->cdev, LED_OFF);
-+	}
-+}
-+
-+static struct platform_driver reset_led_driver = {
-+	.probe		= reset_led_probe,
-+	.shutdown	= reset_led_shutdown,
-+	.driver		= {
-+		.name	= "leds-reset",
-+		.of_match_table = of_reset_leds_match,
-+	},
-+};
-+
-+module_platform_driver(reset_led_driver);
-+
-+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
-+MODULE_DESCRIPTION("reset controller LED driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:leds-reset");
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -93,6 +93,7 @@ obj-$(CONFIG_LEDS_TURRIS_OMNIA)		+= leds
- obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
- obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
- obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
-+obj-$(CONFIG_LEDS_RESET)		+= leds-reset.o
- 
- # LED SPI Drivers
- obj-$(CONFIG_LEDS_CR0014114)		+= leds-cr0014114.o
diff --git a/target/linux/ath79/patches-5.10/0004-phy-add-ath79-usb-phys.patch b/target/linux/ath79/patches-5.10/0004-phy-add-ath79-usb-phys.patch
deleted file mode 100644
index 56c3d6188763..000000000000
--- a/target/linux/ath79/patches-5.10/0004-phy-add-ath79-usb-phys.patch
+++ /dev/null
@@ -1,333 +0,0 @@
-From 08c9d6ceef01893678a5d2e8a15517c745417f21 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:04:05 +0100
-Subject: [PATCH 04/27] phy: add ath79 usb phys
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/phy/Kconfig          |  16 ++++++
- drivers/phy/Makefile         |   2 +
- drivers/phy/phy-ar7100-usb.c | 124 +++++++++++++++++++++++++++++++++++++++++++
- drivers/phy/phy-ar7200-usb.c | 108 +++++++++++++++++++++++++++++++++++++
- 4 files changed, 250 insertions(+)
- create mode 100644 drivers/phy/phy-ar7100-usb.c
- create mode 100644 drivers/phy/phy-ar7200-usb.c
-
---- a/drivers/phy/Kconfig
-+++ b/drivers/phy/Kconfig
-@@ -24,6 +24,22 @@ config GENERIC_PHY_MIPI_DPHY
- 	  Provides a number of helpers a core functions for MIPI D-PHY
- 	  drivers to us.
- 
-+config PHY_AR7100_USB
-+	tristate "Atheros AR7100 USB PHY driver"
-+	depends on ATH79 || COMPILE_TEST
-+	default y if USB_EHCI_HCD_PLATFORM
-+	select GENERIC_PHY
-+	help
-+	  Enable this to support the USB PHY on Atheros AR7100 SoCs.
-+
-+config PHY_AR7200_USB
-+	tristate "Atheros AR7200 USB PHY driver"
-+	depends on ATH79 || COMPILE_TEST
-+	default y if USB_EHCI_HCD_PLATFORM
-+	select GENERIC_PHY
-+	help
-+	  Enable this to support the USB PHY on Atheros AR7200 SoCs.
-+
- config PHY_LPC18XX_USB_OTG
- 	tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
- 	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
---- a/drivers/phy/Makefile
-+++ b/drivers/phy/Makefile
-@@ -4,6 +4,8 @@
- #
- 
- obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
-+obj-$(CONFIG_PHY_AR7100_USB)		+= phy-ar7100-usb.o
-+obj-$(CONFIG_PHY_AR7200_USB)		+= phy-ar7200-usb.o
- obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY)	+= phy-core-mipi-dphy.o
- obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
- obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
---- /dev/null
-+++ b/drivers/phy/phy-ar7100-usb.c
-@@ -0,0 +1,140 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/delay.h>
-+#include <linux/reset.h>
-+#include <linux/of_gpio.h>
-+
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+struct ar7100_usb_phy {
-+	struct reset_control	*rst_phy;
-+	struct reset_control	*rst_host;
-+	struct reset_control	*rst_ohci_dll;
-+	void __iomem		*io_base;
-+	struct phy		*phy;
-+	int			gpio;
-+};
-+
-+static int ar7100_usb_phy_power_off(struct phy *phy)
-+{
-+	struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
-+	int err = 0;
-+
-+	err |= reset_control_assert(priv->rst_host);
-+	err |= reset_control_assert(priv->rst_phy);
-+	err |= reset_control_assert(priv->rst_ohci_dll);
-+
-+	return err;
-+}
-+
-+static int ar7100_usb_phy_power_on(struct phy *phy)
-+{
-+	struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
-+	int err = 0;
-+
-+	err |= ar7100_usb_phy_power_off(phy);
-+	mdelay(100);
-+	err |= reset_control_deassert(priv->rst_ohci_dll);
-+	err |= reset_control_deassert(priv->rst_phy);
-+	err |= reset_control_deassert(priv->rst_host);
-+	mdelay(500);
-+	iowrite32(0xf0000, priv->io_base + AR71XX_USB_CTRL_REG_CONFIG);
-+	iowrite32(0x20c00, priv->io_base + AR71XX_USB_CTRL_REG_FLADJ);
-+
-+	return err;
-+}
-+
-+static const struct phy_ops ar7100_usb_phy_ops = {
-+	.power_on	= ar7100_usb_phy_power_on,
-+	.power_off	= ar7100_usb_phy_power_off,
-+	.owner		= THIS_MODULE,
-+};
-+
-+static int ar7100_usb_phy_probe(struct platform_device *pdev)
-+{
-+	struct phy_provider *phy_provider;
-+	struct resource *res;
-+	struct ar7100_usb_phy *priv;
-+
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	priv->io_base = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(priv->io_base))
-+		return PTR_ERR(priv->io_base);
-+
-+	priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
-+	if (IS_ERR(priv->rst_phy)) {
-+		dev_err(&pdev->dev, "phy reset is missing\n");
-+		return PTR_ERR(priv->rst_phy);
-+	}
-+
-+	priv->rst_host = devm_reset_control_get(&pdev->dev, "usb-host");
-+	if (IS_ERR(priv->rst_host)) {
-+		dev_err(&pdev->dev, "host reset is missing\n");
-+		return PTR_ERR(priv->rst_host);
-+	}
-+
-+	priv->rst_ohci_dll = devm_reset_control_get(&pdev->dev, "usb-ohci-dll");
-+	if (IS_ERR(priv->rst_ohci_dll)) {
-+		dev_err(&pdev->dev, "ohci-dll reset is missing\n");
-+		return PTR_ERR(priv->rst_host);
-+	}
-+
-+	priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7100_usb_phy_ops);
-+	if (IS_ERR(priv->phy)) {
-+		dev_err(&pdev->dev, "failed to create PHY\n");
-+		return PTR_ERR(priv->phy);
-+	}
-+
-+	priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
-+	if (priv->gpio >= 0) {
-+		int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
-+
-+		if (ret) {
-+			dev_err(&pdev->dev, "failed to request gpio\n");
-+			return ret;
-+		}
-+		gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
-+		gpio_set_value(priv->gpio, 1);
-+	}
-+
-+	phy_set_drvdata(priv->phy, priv);
-+
-+	phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-+
-+
-+	return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id ar7100_usb_phy_of_match[] = {
-+	{ .compatible = "qca,ar7100-usb-phy" },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, ar7100_usb_phy_of_match);
-+
-+static struct platform_driver ar7100_usb_phy_driver = {
-+	.probe	= ar7100_usb_phy_probe,
-+	.driver = {
-+		.of_match_table	= ar7100_usb_phy_of_match,
-+		.name		= "ar7100-usb-phy",
-+	}
-+};
-+module_platform_driver(ar7100_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("ATH79 USB PHY driver");
-+MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/phy/phy-ar7200-usb.c
-@@ -0,0 +1,136 @@
-+/*
-+ * Copyright (C) 2015 Alban Bedel <albeu@free.fr>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/reset.h>
-+#include <linux/of_gpio.h>
-+
-+struct ar7200_usb_phy {
-+	struct reset_control	*rst_phy;
-+	struct reset_control	*rst_phy_analog;
-+	struct reset_control	*suspend_override;
-+	struct phy		*phy;
-+	int			gpio;
-+};
-+
-+static int ar7200_usb_phy_power_on(struct phy *phy)
-+{
-+	struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
-+	int err = 0;
-+
-+	if (priv->suspend_override)
-+		err = reset_control_assert(priv->suspend_override);
-+	if (priv->rst_phy)
-+		err |= reset_control_deassert(priv->rst_phy);
-+	if (priv->rst_phy_analog)
-+		err |= reset_control_deassert(priv->rst_phy_analog);
-+
-+	return err;
-+}
-+
-+static int ar7200_usb_phy_power_off(struct phy *phy)
-+{
-+	struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
-+	int err = 0;
-+
-+	if (priv->suspend_override)
-+		err = reset_control_deassert(priv->suspend_override);
-+	if (priv->rst_phy)
-+		err |= reset_control_assert(priv->rst_phy);
-+	if (priv->rst_phy_analog)
-+		err |= reset_control_assert(priv->rst_phy_analog);
-+
-+	return err;
-+}
-+
-+static const struct phy_ops ar7200_usb_phy_ops = {
-+	.power_on	= ar7200_usb_phy_power_on,
-+	.power_off	= ar7200_usb_phy_power_off,
-+	.owner		= THIS_MODULE,
-+};
-+
-+static int ar7200_usb_phy_probe(struct platform_device *pdev)
-+{
-+	struct phy_provider *phy_provider;
-+	struct ar7200_usb_phy *priv;
-+
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
-+	if (IS_ERR(priv->rst_phy)) {
-+		if (PTR_ERR(priv->rst_phy) != -EPROBE_DEFER)
-+			dev_err(&pdev->dev, "phy reset is missing\n");
-+		return PTR_ERR(priv->rst_phy);
-+	}
-+
-+	priv->rst_phy_analog = devm_reset_control_get_optional(
-+		&pdev->dev, "usb-phy-analog");
-+	if (IS_ERR(priv->rst_phy_analog)) {
-+		if (PTR_ERR(priv->rst_phy_analog) == -ENOENT)
-+			priv->rst_phy_analog = NULL;
-+		else
-+			return PTR_ERR(priv->rst_phy_analog);
-+	}
-+
-+	priv->suspend_override = devm_reset_control_get_optional(
-+		&pdev->dev, "usb-suspend-override");
-+	if (IS_ERR(priv->suspend_override)) {
-+		if (PTR_ERR(priv->suspend_override) == -ENOENT)
-+			priv->suspend_override = NULL;
-+		else
-+			return PTR_ERR(priv->suspend_override);
-+	}
-+
-+	priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7200_usb_phy_ops);
-+	if (IS_ERR(priv->phy)) {
-+		dev_err(&pdev->dev, "failed to create PHY\n");
-+		return PTR_ERR(priv->phy);
-+	}
-+
-+	priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
-+	if (priv->gpio >= 0) {
-+		int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
-+
-+		if (ret) {
-+			dev_err(&pdev->dev, "failed to request gpio\n");
-+			return ret;
-+		}
-+		gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
-+		gpio_set_value(priv->gpio, 1);
-+	}
-+
-+	phy_set_drvdata(priv->phy, priv);
-+
-+	phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-+
-+	return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id ar7200_usb_phy_of_match[] = {
-+	{ .compatible = "qca,ar7200-usb-phy" },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, ar7200_usb_phy_of_match);
-+
-+static struct platform_driver ar7200_usb_phy_driver = {
-+	.probe	= ar7200_usb_phy_probe,
-+	.driver = {
-+		.of_match_table	= ar7200_usb_phy_of_match,
-+		.name		= "ar7200-usb-phy",
-+	}
-+};
-+module_platform_driver(ar7200_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("ATH79 USB PHY driver");
-+MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ath79/patches-5.10/0005-usb-add-more-OF-quirk-properties.patch b/target/linux/ath79/patches-5.10/0005-usb-add-more-OF-quirk-properties.patch
deleted file mode 100644
index d6d8cb695222..000000000000
--- a/target/linux/ath79/patches-5.10/0005-usb-add-more-OF-quirk-properties.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 2201818e5bd33f389beceb3943fdfcf5a698fc5b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:01:43 +0100
-Subject: [PATCH 05/27] usb: add more OF/quirk properties
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/usb/host/ehci-platform.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -277,6 +277,11 @@ static int ehci_platform_probe(struct pl
- 	ehci = hcd_to_ehci(hcd);
- 
- 	if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
-+		of_property_read_u32(dev->dev.of_node, "caps-offset", &pdata->caps_offset);
-+
-+		if (of_property_read_bool(dev->dev.of_node, "has-synopsys-hc-bug"))
-+			pdata->has_synopsys_hc_bug = 1;
-+
- 		if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
- 			ehci->big_endian_mmio = 1;
- 
diff --git a/target/linux/ath79/patches-5.10/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch b/target/linux/ath79/patches-5.10/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
deleted file mode 100644
index ceda511c21af..000000000000
--- a/target/linux/ath79/patches-5.10/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
+++ /dev/null
@@ -1,168 +0,0 @@
-From f3eacff2310a60348a755c50a8da6fc251fc8587 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:55:13 +0100
-Subject: [PATCH 07/33] irqchip/irq-ath79-intc: add irq cascade driver for
- QCA9556 SoCs
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/irqchip/Makefile         |   1 +
- drivers/irqchip/irq-ath79-intc.c | 142 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 143 insertions(+)
- create mode 100644 drivers/irqchip/irq-ath79-intc.c
-
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -4,6 +4,7 @@ obj-$(CONFIG_IRQCHIP)			+= irqchip.o
- obj-$(CONFIG_AL_FIC)			+= irq-al-fic.o
- obj-$(CONFIG_ALPINE_MSI)		+= irq-alpine-msi.o
- obj-$(CONFIG_ATH79)			+= irq-ath79-cpu.o
-+obj-$(CONFIG_ATH79)			+= irq-ath79-intc.o
- obj-$(CONFIG_ATH79)			+= irq-ath79-misc.o
- obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
- obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2836.o
---- /dev/null
-+++ b/drivers/irqchip/irq-ath79-intc.c
-@@ -0,0 +1,142 @@
-+/*
-+ *  Atheros AR71xx/AR724x/AR913x specific interrupt handling
-+ *
-+ *  Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/irqchip.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/irqdomain.h>
-+
-+#include <asm/irq_cpu.h>
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#define ATH79_MAX_INTC_CASCADE	3
-+
-+struct ath79_intc {
-+	struct irq_chip chip;
-+	u32 irq;
-+	u32 pending_mask;
-+	u32 int_status;
-+	u32 irq_mask[ATH79_MAX_INTC_CASCADE];
-+	u32 irq_wb_chan[ATH79_MAX_INTC_CASCADE];
-+};
-+
-+static void ath79_intc_irq_handler(struct irq_desc *desc)
-+{
-+	struct irq_domain *domain = irq_desc_get_handler_data(desc);
-+	struct ath79_intc *intc = domain->host_data;
-+	u32 pending;
-+
-+	pending = ath79_reset_rr(intc->int_status);
-+	pending &= intc->pending_mask;
-+
-+	if (pending) {
-+		int i;
-+
-+		for (i = 0; i < domain->hwirq_max; i++)
-+			if (pending & intc->irq_mask[i]) {
-+				if (intc->irq_wb_chan[i] != 0xffffffff)
-+					ath79_ddr_wb_flush(intc->irq_wb_chan[i]);
-+				generic_handle_irq(irq_find_mapping(domain, i));
-+			}
-+	} else {
-+		spurious_interrupt();
-+	}
-+}
-+
-+static void ath79_intc_irq_enable(struct irq_data *d)
-+{
-+	struct ath79_intc *intc = d->domain->host_data;
-+	enable_irq(intc->irq);
-+}
-+
-+static void ath79_intc_irq_disable(struct irq_data *d)
-+{
-+	struct ath79_intc *intc = d->domain->host_data;
-+	disable_irq(intc->irq);
-+}
-+
-+static int ath79_intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+	struct ath79_intc *intc = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &intc->chip, handle_level_irq);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops ath79_irq_domain_ops = {
-+	.xlate = irq_domain_xlate_onecell,
-+	.map = ath79_intc_map,
-+};
-+
-+static int __init ath79_intc_of_init(
-+	struct device_node *node, struct device_node *parent)
-+{
-+	struct irq_domain *domain;
-+	struct ath79_intc *intc;
-+	int cnt, cntwb, i, err;
-+
-+	cnt = of_property_count_u32_elems(node, "qca,pending-bits");
-+	if (cnt > ATH79_MAX_INTC_CASCADE)
-+		panic("Too many INTC pending bits\n");
-+
-+	intc = kzalloc(sizeof(*intc), GFP_KERNEL);
-+	if (!intc)
-+		panic("Failed to allocate INTC memory\n");
-+	intc->chip = dummy_irq_chip;
-+	intc->chip.name = "INTC";
-+	intc->chip.irq_disable = ath79_intc_irq_disable;
-+	intc->chip.irq_enable = ath79_intc_irq_enable;
-+
-+	if (of_property_read_u32(node, "qca,int-status-addr", &intc->int_status) < 0) {
-+		panic("Missing address of interrupt status register\n");
-+	}
-+
-+	of_property_read_u32_array(node, "qca,pending-bits", intc->irq_mask, cnt);
-+	for (i = 0; i < cnt; i++) {
-+		intc->pending_mask |= intc->irq_mask[i];
-+		intc->irq_wb_chan[i] = 0xffffffff;
-+	}
-+
-+	cntwb = of_count_phandle_with_args(
-+		node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
-+
-+	for (i = 0; i < cntwb; i++) {
-+		struct of_phandle_args args;
-+		u32 irq = i;
-+
-+		of_property_read_u32_index(
-+			node, "qca,ddr-wb-channel-interrupts", i, &irq);
-+		if (irq >= ATH79_MAX_INTC_CASCADE)
-+			continue;
-+
-+		err = of_parse_phandle_with_args(
-+			node, "qca,ddr-wb-channels",
-+			"#qca,ddr-wb-channel-cells",
-+			i, &args);
-+		if (err)
-+			return err;
-+
-+		intc->irq_wb_chan[irq] = args.args[0];
-+	}
-+
-+	intc->irq = irq_of_parse_and_map(node, 0);
-+	if (!intc->irq)
-+		panic("Failed to get INTC IRQ");
-+
-+	domain = irq_domain_add_linear(node, cnt, &ath79_irq_domain_ops, intc);
-+	irq_set_chained_handler_and_data(intc->irq, ath79_intc_irq_handler, domain);
-+
-+	return 0;
-+}
-+IRQCHIP_DECLARE(ath79_intc, "qca,ar9340-intc",
-+		ath79_intc_of_init);
diff --git a/target/linux/ath79/patches-5.10/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch b/target/linux/ath79/patches-5.10/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
deleted file mode 100644
index 13117d9a8e6f..000000000000
--- a/target/linux/ath79/patches-5.10/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From e029f998594f151008ecbfa024e2957edd2a5189 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:58:19 +0100
-Subject: [PATCH 08/33] irqchip/irq-ath79-cpu: drop !OF init helper
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/irqchip/irq-ath79-cpu.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/drivers/irqchip/irq-ath79-cpu.c
-+++ b/drivers/irqchip/irq-ath79-cpu.c
-@@ -85,10 +85,3 @@ static int __init ar79_cpu_intc_of_init(
- }
- IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
- 		ar79_cpu_intc_of_init);
--
--void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3)
--{
--	irq_wb_chan[2] = irq_wb_chan2;
--	irq_wb_chan[3] = irq_wb_chan3;
--	mips_cpu_irq_init();
--}
diff --git a/target/linux/ath79/patches-5.10/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch b/target/linux/ath79/patches-5.10/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
deleted file mode 100644
index bf7eb691a5db..000000000000
--- a/target/linux/ath79/patches-5.10/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 4a4f869ec58ed8910b9b2e68d0eee50957e9bb20 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:10 +0200
-Subject: [PATCH 17/33] dt-bindings: PCI: qcom,ar7100: adds binding doc
-
-With the driver being converted from platform_data to pure OF, we need to
-also add some docs.
-
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../devicetree/bindings/pci/qcom,ar7100-pci.txt    | 38 ++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
-@@ -0,0 +1,38 @@
-+* Qualcomm Atheros AR7100 PCI express root complex
-+
-+Required properties:
-+- compatible: should contain "qcom,ar7100-pci" to identify the core.
-+- reg: Should contain the register ranges as listed in the reg-names property.
-+- reg-names: Definition: Must include the following entries
-+	- "cfg_base"	IO Memory
-+- #address-cells: set to <3>
-+- #size-cells: set to <2>
-+- ranges: ranges for the PCI memory and I/O regions
-+- interrupt-map-mask and interrupt-map: standard PCI
-+	properties to define the mapping of the PCIe interface to interrupt
-+	numbers.
-+- #interrupt-cells: set to <1>
-+- interrupt-controller: define to enable the builtin IRQ cascade.
-+
-+Optional properties:
-+- interrupt-parent: phandle to the MIPS IRQ controller
-+
-+* Example for ar7100
-+	pcie-controller@180c0000 {
-+		compatible = "qca,ar7100-pci";
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+		bus-range = <0x0 0x0>;
-+		reg = <0x17010000 0x100>;
-+		reg-names = "cfg_base";
-+		ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000
-+			  0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
-+		interrupt-parent = <&cpuintc>;
-+		interrupts = <2>;
-+
-+		interrupt-controller;
-+		#interrupt-cells = <1>;
-+
-+		interrupt-map-mask = <0 0 0 1>;
-+		interrupt-map = <0 0 0 0 &pcie0 0>;
-+	};
diff --git a/target/linux/ath79/patches-5.10/0018-MIPS-pci-ar71xx-convert-to-OF.patch b/target/linux/ath79/patches-5.10/0018-MIPS-pci-ar71xx-convert-to-OF.patch
deleted file mode 100644
index e600a4f0d945..000000000000
--- a/target/linux/ath79/patches-5.10/0018-MIPS-pci-ar71xx-convert-to-OF.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From 1855ab6b1d27f5b38a648baf57ff6a534afec26d Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:07:23 +0200
-Subject: [PATCH 18/33] MIPS: pci-ar71xx: convert to OF
-
-With the ath79 target getting converted to pure OF, we can drop all the
-platform data code and add the missing OF bits to the driver. We also add
-a irq domain for the PCI/e controllers cascade, thus making it usable from
-dts files.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/pci/pci-ar71xx.c | 82 +++++++++++++++++++++++-----------------------
- 1 file changed, 41 insertions(+), 41 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -15,8 +15,11 @@
- #include <linux/pci.h>
- #include <linux/pci_regs.h>
- #include <linux/interrupt.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
- 
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79.h>
-@@ -46,12 +49,13 @@
- #define AR71XX_PCI_IRQ_COUNT		5
- 
- struct ar71xx_pci_controller {
-+	struct device_node *np;
- 	void __iomem *cfg_base;
- 	int irq;
--	int irq_base;
- 	struct pci_controller pci_ctrl;
- 	struct resource io_res;
- 	struct resource mem_res;
-+	struct irq_domain *domain;
- };
- 
- /* Byte lane enable bits */
-@@ -225,29 +229,30 @@ static struct pci_ops ar71xx_pci_ops = {
- 
- static void ar71xx_pci_irq_handler(struct irq_desc *desc)
- {
--	struct ar71xx_pci_controller *apc;
- 	void __iomem *base = ath79_reset_base;
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
- 	u32 pending;
- 
--	apc = irq_desc_get_handler_data(desc);
--
-+	chained_irq_enter(chip, desc);
- 	pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
- 		  __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- 
- 	if (pending & AR71XX_PCI_INT_DEV0)
--		generic_handle_irq(apc->irq_base + 0);
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 1));
- 
- 	else if (pending & AR71XX_PCI_INT_DEV1)
--		generic_handle_irq(apc->irq_base + 1);
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 2));
- 
- 	else if (pending & AR71XX_PCI_INT_DEV2)
--		generic_handle_irq(apc->irq_base + 2);
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 3));
- 
- 	else if (pending & AR71XX_PCI_INT_CORE)
--		generic_handle_irq(apc->irq_base + 4);
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 4));
- 
- 	else
- 		spurious_interrupt();
-+	chained_irq_exit(chip, desc);
- }
- 
- static void ar71xx_pci_irq_unmask(struct irq_data *d)
-@@ -258,7 +263,7 @@ static void ar71xx_pci_irq_unmask(struct
- 	u32 t;
- 
- 	apc = irq_data_get_irq_chip_data(d);
--	irq = d->irq - apc->irq_base;
-+	irq = irq_linear_revmap(apc->domain, d->irq);
- 
- 	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- 	__raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-@@ -275,7 +280,7 @@ static void ar71xx_pci_irq_mask(struct i
- 	u32 t;
- 
- 	apc = irq_data_get_irq_chip_data(d);
--	irq = d->irq - apc->irq_base;
-+	irq = irq_linear_revmap(apc->domain, d->irq);
- 
- 	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- 	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-@@ -291,24 +296,31 @@ static struct irq_chip ar71xx_pci_irq_ch
- 	.irq_mask_ack	= ar71xx_pci_irq_mask,
- };
- 
-+static int ar71xx_pci_irq_map(struct irq_domain *d,
-+			      unsigned int irq, irq_hw_number_t hw)
-+{
-+	struct ar71xx_pci_controller *apc = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
-+	irq_set_chip_data(irq, apc);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops ar71xx_pci_domain_ops = {
-+	.xlate = irq_domain_xlate_onecell,
-+	.map = ar71xx_pci_irq_map,
-+};
-+
- static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
- {
- 	void __iomem *base = ath79_reset_base;
--	int i;
- 
- 	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- 	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
- 
--	BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
--
--	apc->irq_base = ATH79_PCI_IRQ_BASE;
--	for (i = apc->irq_base;
--	     i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) {
--		irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
--					 handle_level_irq);
--		irq_set_chip_data(i, apc);
--	}
--
-+	apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
-+					    &ar71xx_pci_domain_ops, apc);
- 	irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
- 					 apc);
- }
-@@ -325,6 +337,11 @@ static void ar71xx_pci_reset(void)
- 	mdelay(100);
- }
- 
-+static const struct of_device_id ar71xx_pci_ids[] = {
-+	{ .compatible = "qca,ar7100-pci" },
-+	{},
-+};
-+
- static int ar71xx_pci_probe(struct platform_device *pdev)
- {
- 	struct ar71xx_pci_controller *apc;
-@@ -345,26 +362,6 @@ static int ar71xx_pci_probe(struct platf
- 	if (apc->irq < 0)
- 		return -EINVAL;
- 
--	res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
--	if (!res)
--		return -EINVAL;
--
--	apc->io_res.parent = res;
--	apc->io_res.name = "PCI IO space";
--	apc->io_res.start = res->start;
--	apc->io_res.end = res->end;
--	apc->io_res.flags = IORESOURCE_IO;
--
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
--	if (!res)
--		return -EINVAL;
--
--	apc->mem_res.parent = res;
--	apc->mem_res.name = "PCI memory space";
--	apc->mem_res.start = res->start;
--	apc->mem_res.end = res->end;
--	apc->mem_res.flags = IORESOURCE_MEM;
--
- 	ar71xx_pci_reset();
- 
- 	/* setup COMMAND register */
-@@ -377,9 +374,11 @@ static int ar71xx_pci_probe(struct platf
- 
- 	ar71xx_pci_irq_init(apc);
- 
-+	apc->np = pdev->dev.of_node;
- 	apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
- 	apc->pci_ctrl.mem_resource = &apc->mem_res;
- 	apc->pci_ctrl.io_resource = &apc->io_res;
-+	pci_load_of_ranges(&apc->pci_ctrl, pdev->dev.of_node);
- 
- 	register_pci_controller(&apc->pci_ctrl);
- 
-@@ -390,6 +389,7 @@ static struct platform_driver ar71xx_pci
- 	.probe = ar71xx_pci_probe,
- 	.driver = {
- 		.name = "ar71xx-pci",
-+		.of_match_table = of_match_ptr(ar71xx_pci_ids),
- 	},
- };
- 
diff --git a/target/linux/ath79/patches-5.10/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch b/target/linux/ath79/patches-5.10/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
deleted file mode 100644
index a0af79cb4da9..000000000000
--- a/target/linux/ath79/patches-5.10/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From ea27764bc3ef2a05decf3ae05edffc289cd0d93c Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:02 +0200
-Subject: [PATCH 19/33] dt-bindings: PCI: qcom,ar7240: adds binding doc
-
-With the driver being converted from platform_data to pure OF, we need to
-also add some docs.
-
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../devicetree/bindings/pci/qcom,ar7240-pci.txt    | 42 ++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
-@@ -0,0 +1,42 @@
-+* Qualcomm Atheros AR724X PCI express root complex
-+
-+Required properties:
-+- compatible: should contain "qcom,ar7240-pci" to identify the core.
-+- reg: Should contain the register ranges as listed in the reg-names property.
-+- reg-names: Definition: Must include the following entries
-+	- "crp_base"	Configuration registers
-+	- "ctrl_base"	Control registers
-+	- "cfg_base"	IO Memory
-+- #address-cells: set to <3>
-+- #size-cells: set to <2>
-+- ranges: ranges for the PCI memory and I/O regions
-+- interrupt-map-mask and interrupt-map: standard PCI
-+	properties to define the mapping of the PCIe interface to interrupt
-+	numbers.
-+- #interrupt-cells: set to <1>
-+- interrupt-parent: phandle to the MIPS IRQ controller
-+
-+Optional properties:
-+- interrupt-controller: define to enable the builtin IRQ cascade.
-+
-+* Example for qca9557
-+	pcie-controller@180c0000 {
-+		compatible = "qcom,ar7240-pci";
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+		bus-range = <0x0 0x0>;
-+		reg = <0x180c0000 0x1000>,
-+		      <0x180f0000 0x100>,
-+		      <0x14000000 0x1000>;
-+		reg-names = "crp_base", "ctrl_base", "cfg_base";
-+		ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000
-+			  0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
-+		interrupt-parent = <&intc2>;
-+		interrupts = <1>;
-+
-+		interrupt-controller;
-+		#interrupt-cells = <1>;
-+
-+		interrupt-map-mask = <0 0 0 1>;
-+		interrupt-map = <0 0 0 0 &pcie0 0>;
-+	};
diff --git a/target/linux/ath79/patches-5.10/0020-MIPS-pci-ar724x-convert-to-OF.patch b/target/linux/ath79/patches-5.10/0020-MIPS-pci-ar724x-convert-to-OF.patch
deleted file mode 100644
index 2772c533928b..000000000000
--- a/target/linux/ath79/patches-5.10/0020-MIPS-pci-ar724x-convert-to-OF.patch
+++ /dev/null
@@ -1,205 +0,0 @@
-From a522ee0199d5d3ea114ca2e211f6ac398d3e8e0b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:07:37 +0200
-Subject: [PATCH 20/33] MIPS: pci-ar724x: convert to OF
-
-With the ath79 target getting converted to pure OF, we can drop all the
-platform data code and add the missing OF bits to the driver. We also add
-a irq domain for the PCI/e controllers cascade, thus making it usable from
-dts files.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/pci/pci-ar724x.c | 88 ++++++++++++++++++++++------------------------
- 1 file changed, 42 insertions(+), 46 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -11,8 +11,11 @@
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/platform_device.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
- 
- #define AR724X_PCI_REG_APP		0x00
- #define AR724X_PCI_REG_RESET		0x18
-@@ -42,17 +45,20 @@ struct ar724x_pci_controller {
- 	void __iomem *crp_base;
- 
- 	int irq;
--	int irq_base;
- 
- 	bool link_up;
- 	bool bar0_is_cached;
- 	u32  bar0_value;
- 
-+	struct device_node *np;
- 	struct pci_controller pci_controller;
-+	struct irq_domain *domain;
- 	struct resource io_res;
- 	struct resource mem_res;
- };
- 
-+static struct irq_chip ar724x_pci_irq_chip;
-+
- static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
- {
- 	u32 reset;
-@@ -228,35 +234,31 @@ static struct pci_ops ar724x_pci_ops = {
- 
- static void ar724x_pci_irq_handler(struct irq_desc *desc)
- {
--	struct ar724x_pci_controller *apc;
--	void __iomem *base;
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	struct ar724x_pci_controller *apc = irq_desc_get_handler_data(desc);
- 	u32 pending;
- 
--	apc = irq_desc_get_handler_data(desc);
--	base = apc->ctrl_base;
--
--	pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
--		  __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-+	chained_irq_enter(chip, desc);
-+	pending = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_STATUS) &
-+		  __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_MASK);
- 
- 	if (pending & AR724X_PCI_INT_DEV0)
--		generic_handle_irq(apc->irq_base + 0);
--
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 1));
- 	else
- 		spurious_interrupt();
-+	chained_irq_exit(chip, desc);
- }
- 
- static void ar724x_pci_irq_unmask(struct irq_data *d)
- {
- 	struct ar724x_pci_controller *apc;
- 	void __iomem *base;
--	int offset;
- 	u32 t;
- 
- 	apc = irq_data_get_irq_chip_data(d);
- 	base = apc->ctrl_base;
--	offset = apc->irq_base - d->irq;
- 
--	switch (offset) {
-+	switch (irq_linear_revmap(apc->domain, d->irq)) {
- 	case 0:
- 		t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- 		__raw_writel(t | AR724X_PCI_INT_DEV0,
-@@ -270,14 +272,12 @@ static void ar724x_pci_irq_mask(struct i
- {
- 	struct ar724x_pci_controller *apc;
- 	void __iomem *base;
--	int offset;
- 	u32 t;
- 
- 	apc = irq_data_get_irq_chip_data(d);
- 	base = apc->ctrl_base;
--	offset = apc->irq_base - d->irq;
- 
--	switch (offset) {
-+	switch (irq_linear_revmap(apc->domain, d->irq)) {
- 	case 0:
- 		t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- 		__raw_writel(t & ~AR724X_PCI_INT_DEV0,
-@@ -302,26 +302,34 @@ static struct irq_chip ar724x_pci_irq_ch
- 	.irq_mask_ack	= ar724x_pci_irq_mask,
- };
- 
-+static int ar724x_pci_irq_map(struct irq_domain *d,
-+			      unsigned int irq, irq_hw_number_t hw)
-+{
-+	struct ar724x_pci_controller *apc = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &ar724x_pci_irq_chip, handle_level_irq);
-+	irq_set_chip_data(irq, apc);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops ar724x_pci_domain_ops = {
-+	.xlate = irq_domain_xlate_onecell,
-+	.map = ar724x_pci_irq_map,
-+};
-+
- static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc,
- 				int id)
- {
- 	void __iomem *base;
--	int i;
- 
- 	base = apc->ctrl_base;
- 
- 	__raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
- 	__raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
- 
--	apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT);
--
--	for (i = apc->irq_base;
--	     i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) {
--		irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
--					 handle_level_irq);
--		irq_set_chip_data(i, apc);
--	}
--
-+	apc->domain = irq_domain_add_linear(apc->np, 2,
-+					    &ar724x_pci_domain_ops, apc);
- 	irq_set_chained_handler_and_data(apc->irq, ar724x_pci_irq_handler,
- 					 apc);
- }
-@@ -388,29 +396,11 @@ static int ar724x_pci_probe(struct platf
- 	if (apc->irq < 0)
- 		return -EINVAL;
- 
--	res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
--	if (!res)
--		return -EINVAL;
--
--	apc->io_res.parent = res;
--	apc->io_res.name = "PCI IO space";
--	apc->io_res.start = res->start;
--	apc->io_res.end = res->end;
--	apc->io_res.flags = IORESOURCE_IO;
--
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
--	if (!res)
--		return -EINVAL;
--
--	apc->mem_res.parent = res;
--	apc->mem_res.name = "PCI memory space";
--	apc->mem_res.start = res->start;
--	apc->mem_res.end = res->end;
--	apc->mem_res.flags = IORESOURCE_MEM;
--
-+	apc->np = pdev->dev.of_node;
- 	apc->pci_controller.pci_ops = &ar724x_pci_ops;
- 	apc->pci_controller.io_resource = &apc->io_res;
- 	apc->pci_controller.mem_resource = &apc->mem_res;
-+	pci_load_of_ranges(&apc->pci_controller, pdev->dev.of_node);
- 
- 	/*
- 	 * Do the full PCIE Root Complex Initialization Sequence if the PCIe
-@@ -432,10 +422,16 @@ static int ar724x_pci_probe(struct platf
- 	return 0;
- }
- 
-+static const struct of_device_id ar724x_pci_ids[] = {
-+	{ .compatible = "qcom,ar7240-pci" },
-+	{},
-+};
-+
- static struct platform_driver ar724x_pci_driver = {
- 	.probe = ar724x_pci_probe,
- 	.driver = {
- 		.name = "ar724x-pci",
-+		.of_match_table = of_match_ptr(ar724x_pci_ids),
- 	},
- };
- 
diff --git a/target/linux/ath79/patches-5.10/0032-MIPS-ath79-sanitize-symbols.patch b/target/linux/ath79/patches-5.10/0032-MIPS-ath79-sanitize-symbols.patch
deleted file mode 100644
index 40cd1689a04b..000000000000
--- a/target/linux/ath79/patches-5.10/0032-MIPS-ath79-sanitize-symbols.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 3fc8585cf76022dba7496627074d42af88c30718 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:16:55 +0200
-Subject: [PATCH 32/33] MIPS: ath79: sanitize symbols
-
-We no longer need to select which SoCs are supported as the whole arch
-code is always built. So lets drop all the SoC symbols
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig       |  2 ++
- arch/mips/ath79/Kconfig | 44 +++++---------------------------------------
- arch/mips/pci/Makefile  |  2 +-
- 3 files changed, 8 insertions(+), 40 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -245,6 +245,8 @@ config ATH79
- 	select SYS_SUPPORTS_BIG_ENDIAN
- 	select SYS_SUPPORTS_MIPS16
- 	select SYS_SUPPORTS_ZBOOT_UART_PROM
-+	select HAVE_PCI
-+	select USB_ARCH_HAS_EHCI
- 	select USE_OF
- 	select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
- 	help
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1,48 +1,14 @@
- # SPDX-License-Identifier: GPL-2.0
- if ATH79
- 
--config SOC_AR71XX
--	select HAVE_PCI
--	def_bool n
--
--config SOC_AR724X
--	select HAVE_PCI
--	select PCI_AR724X if PCI
--	def_bool n
--
--config SOC_AR913X
--	def_bool n
--
--config SOC_AR933X
--	def_bool n
--
--config SOC_AR934X
--	select HAVE_PCI
--	select PCI_AR724X if PCI
--	def_bool n
--
--config SOC_QCA955X
--	select HAVE_PCI
--	select PCI_AR724X if PCI
-+config PCI_AR71XX
-+	bool "PCI support for AR7100 type SoCs"
-+	depends on PCI
- 	def_bool n
- 
- config PCI_AR724X
--	def_bool n
--
--config ATH79_DEV_GPIO_BUTTONS
--	def_bool n
--
--config ATH79_DEV_LEDS_GPIO
--	def_bool n
--
--config ATH79_DEV_SPI
--	def_bool n
--
--config ATH79_DEV_USB
--	def_bool n
--
--config ATH79_DEV_WMAC
--	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
-+	bool "PCI support for AR724x type SoCs"
-+	depends on PCI
- 	def_bool n
- 
- endif
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -21,7 +21,7 @@ obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o
- 					ops-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchemy.o
- obj-$(CONFIG_PCI_AR2315)	+= pci-ar2315.o
--obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
-+obj-$(CONFIG_PCI_AR71XX)	+= pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
- obj-$(CONFIG_PCI_XTALK_BRIDGE)	+= pci-xtalk-bridge.o
- #
diff --git a/target/linux/ath79/patches-5.10/0033-spi-ath79-drop-pdata-support.patch b/target/linux/ath79/patches-5.10/0033-spi-ath79-drop-pdata-support.patch
deleted file mode 100644
index 162a82bda3d2..000000000000
--- a/target/linux/ath79/patches-5.10/0033-spi-ath79-drop-pdata-support.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From c4e197bbcecc7233aa9e553e7047fa50e4e1fe77 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:34 +0200
-Subject: [PATCH 33/33] spi: ath79: drop pdata support
-
-The target is being converted to pure OF. We can therefore drop all of the
-platform data code from the driver.
-
-Cc: linux-spi@vger.kernel.org
-Acked-by: Mark Brown <broonie@kernel.org>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- include/linux/platform_data/spi-ath79.h | 16 -------------------
- drivers/spi/spi-ath79.c                               |  8 --------
- 2 files changed, 27 deletions(-)
- delete mode 100644 arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-
---- a/include/linux/platform_data/spi-ath79.h
-+++ /dev/null
-@@ -1,16 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0-only */
--/*
-- *  Platform data definition for Atheros AR71XX/AR724X/AR913X SPI controller
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- */
--
--#ifndef _ATH79_SPI_PLATFORM_H
--#define _ATH79_SPI_PLATFORM_H
--
--struct ath79_spi_platform_data {
--	unsigned	bus_num;
--	unsigned	num_chipselect;
--};
--
--#endif /* _ATH79_SPI_PLATFORM_H */
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -19,7 +19,6 @@
- #include <linux/bitops.h>
- #include <linux/clk.h>
- #include <linux/err.h>
--#include <linux/platform_data/spi-ath79.h>
- 
- #define DRV_NAME	"ath79-spi"
- 
-@@ -138,7 +137,6 @@ static int ath79_spi_probe(struct platfo
- {
- 	struct spi_master *master;
- 	struct ath79_spi *sp;
--	struct ath79_spi_platform_data *pdata;
- 	unsigned long rate;
- 	int ret;
- 
-@@ -152,15 +150,9 @@ static int ath79_spi_probe(struct platfo
- 	master->dev.of_node = pdev->dev.of_node;
- 	platform_set_drvdata(pdev, sp);
- 
--	pdata = dev_get_platdata(&pdev->dev);
--
- 	master->use_gpio_descriptors = true;
- 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
- 	master->flags = SPI_MASTER_GPIO_SS;
--	if (pdata) {
--		master->bus_num = pdata->bus_num;
--		master->num_chipselect = pdata->num_chipselect;
--	}
- 
- 	sp->bitbang.master = master;
- 	sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ath79/patches-5.10/0034-MIPS-ath79-ath9k-exports.patch b/target/linux/ath79/patches-5.10/0034-MIPS-ath79-ath9k-exports.patch
deleted file mode 100644
index e460fe58f3fc..000000000000
--- a/target/linux/ath79/patches-5.10/0034-MIPS-ath79-ath9k-exports.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From: John Crispin <john@phrozen.org>
-Subject: [PATCH] ath79: make ahb wifi work
-
-Submitted-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/common.c                      | 3 +++
- mips/include/asm/mach-ath79/ath79.h           | 1+
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -31,11 +31,13 @@ EXPORT_SYMBOL_GPL(ath79_ddr_freq);
- 
- enum ath79_soc_type ath79_soc;
- unsigned int ath79_soc_rev;
-+EXPORT_SYMBOL_GPL(ath79_soc_rev);
- 
- void __iomem *ath79_pll_base;
- void __iomem *ath79_reset_base;
- EXPORT_SYMBOL_GPL(ath79_reset_base);
--static void __iomem *ath79_ddr_base;
-+void __iomem *ath79_ddr_base;
-+EXPORT_SYMBOL_GPL(ath79_ddr_base);
- static void __iomem *ath79_ddr_wb_flush_base;
- static void __iomem *ath79_ddr_pci_win_base;
- 
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -149,6 +149,7 @@ void ath79_ddr_wb_flush(unsigned int reg
- void ath79_ddr_set_pci_windows(void);
- 
- extern void __iomem *ath79_pll_base;
-+extern void __iomem *ath79_ddr_base;
- extern void __iomem *ath79_reset_base;
- 
- static inline void ath79_pll_wr(unsigned reg, u32 val)
diff --git a/target/linux/ath79/patches-5.10/0036-MIPS-ath79-remove-irq-code-from-pci.patch b/target/linux/ath79/patches-5.10/0036-MIPS-ath79-remove-irq-code-from-pci.patch
deleted file mode 100644
index 4732d1b2c876..000000000000
--- a/target/linux/ath79/patches-5.10/0036-MIPS-ath79-remove-irq-code-from-pci.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From: John Crispin <john@phrozen.org>
-Subject: ath79: fix remove irq code from pci driver patch
-
-This patch got mangled in the void while rebasing it.
-
-Submitted-by: John Crispin <john@phrozen.org>
----
- arch/mips/pci/pci-ar71xx.c                    | 107 ------------------
- 1 file changed, 141 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -51,11 +51,9 @@
- struct ar71xx_pci_controller {
- 	struct device_node *np;
- 	void __iomem *cfg_base;
--	int irq;
- 	struct pci_controller pci_ctrl;
- 	struct resource io_res;
- 	struct resource mem_res;
--	struct irq_domain *domain;
- };
- 
- /* Byte lane enable bits */
-@@ -227,104 +225,6 @@ static struct pci_ops ar71xx_pci_ops = {
- 	.write	= ar71xx_pci_write_config,
- };
- 
--static void ar71xx_pci_irq_handler(struct irq_desc *desc)
--{
--	void __iomem *base = ath79_reset_base;
--	struct irq_chip *chip = irq_desc_get_chip(desc);
--	struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
--	u32 pending;
--
--	chained_irq_enter(chip, desc);
--	pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
--		  __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
--	if (pending & AR71XX_PCI_INT_DEV0)
--		generic_handle_irq(irq_linear_revmap(apc->domain, 1));
--
--	else if (pending & AR71XX_PCI_INT_DEV1)
--		generic_handle_irq(irq_linear_revmap(apc->domain, 2));
--
--	else if (pending & AR71XX_PCI_INT_DEV2)
--		generic_handle_irq(irq_linear_revmap(apc->domain, 3));
--
--	else if (pending & AR71XX_PCI_INT_CORE)
--		generic_handle_irq(irq_linear_revmap(apc->domain, 4));
--
--	else
--		spurious_interrupt();
--	chained_irq_exit(chip, desc);
--}
--
--static void ar71xx_pci_irq_unmask(struct irq_data *d)
--{
--	struct ar71xx_pci_controller *apc;
--	unsigned int irq;
--	void __iomem *base = ath79_reset_base;
--	u32 t;
--
--	apc = irq_data_get_irq_chip_data(d);
--	irq = irq_linear_revmap(apc->domain, d->irq);
--
--	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--	__raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
--	/* flush write */
--	__raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--}
--
--static void ar71xx_pci_irq_mask(struct irq_data *d)
--{
--	struct ar71xx_pci_controller *apc;
--	unsigned int irq;
--	void __iomem *base = ath79_reset_base;
--	u32 t;
--
--	apc = irq_data_get_irq_chip_data(d);
--	irq = irq_linear_revmap(apc->domain, d->irq);
--
--	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
--	/* flush write */
--	__raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--}
--
--static struct irq_chip ar71xx_pci_irq_chip = {
--	.name		= "AR71XX PCI",
--	.irq_mask	= ar71xx_pci_irq_mask,
--	.irq_unmask	= ar71xx_pci_irq_unmask,
--	.irq_mask_ack	= ar71xx_pci_irq_mask,
--};
--
--static int ar71xx_pci_irq_map(struct irq_domain *d,
--			      unsigned int irq, irq_hw_number_t hw)
--{
--	struct ar71xx_pci_controller *apc = d->host_data;
--
--	irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
--	irq_set_chip_data(irq, apc);
--
--	return 0;
--}
--
--static const struct irq_domain_ops ar71xx_pci_domain_ops = {
--	.xlate = irq_domain_xlate_onecell,
--	.map = ar71xx_pci_irq_map,
--};
--
--static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
--{
--	void __iomem *base = ath79_reset_base;
--
--	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
--
--	apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
--					    &ar71xx_pci_domain_ops, apc);
--	irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
--					 apc);
--}
--
- static void ar71xx_pci_reset(void)
- {
- 	ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
-@@ -358,10 +258,6 @@ static int ar71xx_pci_probe(struct platf
- 	if (IS_ERR(apc->cfg_base))
- 		return PTR_ERR(apc->cfg_base);
- 
--	apc->irq = platform_get_irq(pdev, 0);
--	if (apc->irq < 0)
--		return -EINVAL;
--
- 	ar71xx_pci_reset();
- 
- 	/* setup COMMAND register */
-@@ -372,8 +268,6 @@ static int ar71xx_pci_probe(struct platf
- 	/* clear bus errors */
- 	ar71xx_pci_check_error(apc, 1);
- 
--	ar71xx_pci_irq_init(apc);
--
- 	apc->np = pdev->dev.of_node;
- 	apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
- 	apc->pci_ctrl.mem_resource = &apc->mem_res;
diff --git a/target/linux/ath79/patches-5.10/0037-missing-registers.patch b/target/linux/ath79/patches-5.10/0037-missing-registers.patch
deleted file mode 100644
index 0e6ac52ade6e..000000000000
--- a/target/linux/ath79/patches-5.10/0037-missing-registers.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Christian Lamparter <chunkeey@gmail.com>
-Subject: [PATCH] ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for
-
-    ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for AR9344
-
-    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1226,6 +1226,10 @@
- #define AR934X_ETH_CFG_RDV_DELAY        BIT(16)
- #define AR934X_ETH_CFG_RDV_DELAY_MASK   0x3
- #define AR934X_ETH_CFG_RDV_DELAY_SHIFT  16
-+#define AR934X_ETH_CFG_TXD_DELAY_MASK   0x3
-+#define AR934X_ETH_CFG_TXD_DELAY_SHIFT  18
-+#define AR934X_ETH_CFG_TXE_DELAY_MASK   0x3
-+#define AR934X_ETH_CFG_TXE_DELAY_SHIFT  20
- 
- /*
-  * QCA953X GMAC Interface
diff --git a/target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch b/target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
deleted file mode 100644
index bc09062dc59f..000000000000
--- a/target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 60efe35257b063ce584968f9f80b437030ce6ba6 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Mon, 18 Mar 2019 00:54:06 +0100
-Subject: [PATCH] MIPS: ath79: add missing QCA955x GMAC registers
-
-This adds missing GMAC register definitions for the Qualcomm Atheros
-QCA955X series MIPS SoCs.
-
-They originate from the platforms U-Boot code and the AVM FRITZ!WLAN
-Repeater 450E's GPL tarball.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- .../mips/include/asm/mach-ath79/ar71xx_regs.h | 54 +++++++++++++++++++
- 1 file changed, 54 insertions(+)
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1246,7 +1246,12 @@
-  */
- 
- #define QCA955X_GMAC_REG_ETH_CFG	0x00
-+#define QCA955X_GMAC_REG_SGMII_RESET	0x14
- #define QCA955X_GMAC_REG_SGMII_SERDES	0x18
-+#define QCA955X_GMAC_REG_MR_AN_CONTROL	0x1c
-+#define QCA955X_GMAC_REG_MR_AN_STATUS	0x20
-+#define QCA955X_GMAC_REG_SGMII_CONFIG	0x34
-+#define QCA955X_GMAC_REG_SGMII_DEBUG	0x58
- 
- #define QCA955X_ETH_CFG_RGMII_EN	BIT(0)
- #define QCA955X_ETH_CFG_MII_GE0		BIT(1)
-@@ -1268,9 +1273,58 @@
- #define QCA955X_ETH_CFG_TXE_DELAY_MASK	0x3
- #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT	20
- 
-+#define QCA955X_SGMII_RESET_RX_CLK_N_RESET	0
-+#define QCA955X_SGMII_RESET_RX_CLK_N		BIT(0)
-+#define QCA955X_SGMII_RESET_TX_CLK_N		BIT(1)
-+#define QCA955X_SGMII_RESET_RX_125M_N		BIT(2)
-+#define QCA955X_SGMII_RESET_TX_125M_N		BIT(3)
-+#define QCA955X_SGMII_RESET_HW_RX_125M_N	BIT(4)
-+
- #define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS	BIT(15)
- #define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
- #define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
-+
-+#define QCA955X_MR_AN_CONTROL_SPEED_SEL1	BIT(6)
-+#define QCA955X_MR_AN_CONTROL_DUPLEX_MODE	BIT(8)
-+#define QCA955X_MR_AN_CONTROL_RESTART_AN	BIT(9)
-+#define QCA955X_MR_AN_CONTROL_POWER_DOWN	BIT(11)
-+#define QCA955X_MR_AN_CONTROL_AN_ENABLE		BIT(12)
-+#define QCA955X_MR_AN_CONTROL_SPEED_SEL0	BIT(13)
-+#define QCA955X_MR_AN_CONTROL_LOOPBACK		BIT(14)
-+#define QCA955X_MR_AN_CONTROL_PHY_RESET		BIT(15)
-+
-+#define QCA955X_MR_AN_STATUS_EXT_CAP		BIT(0)
-+#define QCA955X_MR_AN_STATUS_LINK_UP		BIT(2)
-+#define QCA955X_MR_AN_STATUS_AN_ABILITY		BIT(3)
-+#define QCA955X_MR_AN_STATUS_REMOTE_FAULT	BIT(4)
-+#define QCA955X_MR_AN_STATUS_AN_COMPLETE	BIT(5)
-+#define QCA955X_MR_AN_STATUS_NO_PREAMBLE	BIT(6)
-+#define QCA955X_MR_AN_STATUS_BASE_PAGE		BIT(7)
-+
-+#define QCA955X_SGMII_CONFIG_MODE_CTRL_SHIFT		0
-+#define QCA955X_SGMII_CONFIG_MODE_CTRL_MASK		0x7
-+#define QCA955X_SGMII_CONFIG_ENABLE_SGMII_TX_PAUSE	BIT(3)
-+#define QCA955X_SGMII_CONFIG_MR_REG4_CHANGED		BIT(4)
-+#define QCA955X_SGMII_CONFIG_FORCE_SPEED		BIT(5)
-+#define QCA955X_SGMII_CONFIG_SPEED_SHIFT		6
-+#define QCA955X_SGMII_CONFIG_SPEED_MASK			0xc0
-+#define QCA955X_SGMII_CONFIG_REMOTE_PHY_LOOPBACK	BIT(8)
-+#define QCA955X_SGMII_CONFIG_NEXT_PAGE_LOADED		BIT(9)
-+#define QCA955X_SGMII_CONFIG_MDIO_ENABLE		BIT(10)
-+#define QCA955X_SGMII_CONFIG_MDIO_PULSE			BIT(11)
-+#define QCA955X_SGMII_CONFIG_MDIO_COMPLETE		BIT(12)
-+#define QCA955X_SGMII_CONFIG_PRBS_ENABLE		BIT(13)
-+#define QCA955X_SGMII_CONFIG_BERT_ENABLE		BIT(14)
-+
-+#define QCA955X_SGMII_DEBUG_TX_STATE_MASK	0xff
-+#define QCA955X_SGMII_DEBUG_TX_STATE_SHIFT	0
-+#define QCA955X_SGMII_DEBUG_RX_STATE_MASK	0xff00
-+#define QCA955X_SGMII_DEBUG_RX_STATE_SHIFT	8
-+#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_MASK	0xff0000
-+#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_SHIFT	16
-+#define QCA955X_SGMII_DEBUG_ARB_STATE_MASK	0xf000000
-+#define QCA955X_SGMII_DEBUG_ARB_STATE_SHIFT	24
-+
- /*
-  * QCA956X GMAC Interface
-  */
diff --git a/target/linux/ath79/patches-5.10/0039-MIPS-ath79-export-UART1-reference-clock.patch b/target/linux/ath79/patches-5.10/0039-MIPS-ath79-export-UART1-reference-clock.patch
deleted file mode 100644
index b24ff216928f..000000000000
--- a/target/linux/ath79/patches-5.10/0039-MIPS-ath79-export-UART1-reference-clock.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: [PATCH] ath79: add support for Atheros AR934x HS UART
-
-AR934x chips also got the 'old' qca,ar9330-uart in addition to the
-'new' ns16550a compatible one. Add support for UART1 clock selector as
-well as device-tree bindings in ar934x.dtsi to make use of that uart.
-
-Reported-by: Piotr Dymacz <pepe2k@gmail.com>
-Submitted-by: Daniel Golle <daniel@makrotopia.org>
----
- arch/mips/ath79/clock.c                       | 7 +++++++
- .../mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
- include/dt-bindings/clock/ath79-clk.h         | 3 ++-
- 3 files changed, 10 insertions(+), 1 deletion(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -40,6 +40,7 @@ static const char * const clk_names[ATH7
- 	[ATH79_CLK_AHB] = "ahb",
- 	[ATH79_CLK_REF] = "ref",
- 	[ATH79_CLK_MDIO] = "mdio",
-+	[ATH79_CLK_UART1] = "uart1",
- };
- 
- static const char * __init ath79_clk_name(int type)
-@@ -344,6 +345,9 @@ static void __init ar934x_clocks_init(vo
- 	if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL)
- 		ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000);
- 
-+	if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_UART1_CLK_SEL)
-+		ath79_set_clk(ATH79_CLK_UART1, 100 * 1000 * 1000);
-+
- 	iounmap(dpll_base);
- }
- 
-@@ -649,6 +653,9 @@ static void __init ath79_clocks_init_dt(
- 	if (!clks[ATH79_CLK_MDIO])
- 		clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF];
- 
-+	if (!clks[ATH79_CLK_UART1])
-+		clks[ATH79_CLK_UART1] = clks[ATH79_CLK_REF];
-+
- 	if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
- 		pr_err("%pOF: could not register clk provider\n", np);
- 		goto err_iounmap;
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -348,6 +348,7 @@
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL	BIT(24)
- 
- #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL	BIT(6)
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_UART1_CLK_SEL	BIT(7)
- 
- #define QCA953X_PLL_CPU_CONFIG_REG		0x00
- #define QCA953X_PLL_DDR_CONFIG_REG		0x04
---- a/include/dt-bindings/clock/ath79-clk.h
-+++ b/include/dt-bindings/clock/ath79-clk.h
-@@ -11,7 +11,8 @@
- #define ATH79_CLK_AHB		2
- #define ATH79_CLK_REF		3
- #define ATH79_CLK_MDIO		4
-+#define ATH79_CLK_UART1		5
- 
--#define ATH79_CLK_END		5
-+#define ATH79_CLK_END		6
- 
- #endif /* __DT_BINDINGS_ATH79_CLK_H */
diff --git a/target/linux/ath79/patches-5.10/004-register_gpio_driver_earlier.patch b/target/linux/ath79/patches-5.10/004-register_gpio_driver_earlier.patch
deleted file mode 100644
index 154de918a575..000000000000
--- a/target/linux/ath79/patches-5.10/004-register_gpio_driver_earlier.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: John Crispin <john@phrozen.org>
-Subject: ath79: Register GPIO driver earlier
-
-HACK: register the GPIO driver earlier to ensure that gpio_request calls
-from mach files succeed.
-
-Submitted-by: John Crispin <john@phrozen.org>
----
- drivers/gpio/gpio-ath79.c                     | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/gpio/gpio-ath79.c
-+++ b/drivers/gpio/gpio-ath79.c
-@@ -306,7 +306,11 @@ static struct platform_driver ath79_gpio
- 	.probe = ath79_gpio_probe,
- };
- 
--module_platform_driver(ath79_gpio_driver);
-+static int __init ath79_gpio_init(void)
-+{
-+	return platform_driver_register(&ath79_gpio_driver);
-+}
-+postcore_initcall(ath79_gpio_init);
- 
- MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
- MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ath79/patches-5.10/0040-ath79-sgmii-config.patch b/target/linux/ath79/patches-5.10/0040-ath79-sgmii-config.patch
deleted file mode 100644
index 4c2b94899aed..000000000000
--- a/target/linux/ath79/patches-5.10/0040-ath79-sgmii-config.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: David Bauer <mail@david-bauer.net>
-Subject: [PATCH] ath79: force SGMII SerDes mode to MAC operation
-
-The mode on the SGMII SerDes on the QCA9563 is 1000 Base-X by default.
-This only allows for 1000 Mbit/s links, however when used with an SGMII
-PHY in 100 Mbit/s link mode, the link remains dead.
-
-This strictly has nothing to do with the SerDes calibration, however it
-is done at the same point in the QCA reference U-Boot which is the
-blueprint for everything happening here. As the current state is more or
-less a hack, this should be fine.
-
-This fixes the issues outlined above on a TP-Link EAP-225 Outdoor.
-
-Reported-by: Tom Herbers <freifunk@tomherbers.de>
-Tested-by: Tom Herbers <freifunk@tomherbers.de>
-Submitted-by: David Bauer <mail@david-bauer.net>
----
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h           | 1 +
- 1 files changed, 1 insertion(+)
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1376,5 +1376,6 @@
- 
- #define QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT	0
- #define QCA956X_SGMII_CONFIG_MODE_CTRL_MASK	0x7
-+#define QCA956X_SGMII_CONFIG_MODE_CTRL_SGMII_MAC	0x2
- 
- #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ath79/patches-5.10/0052-mtd-spi-nor-use-4-bit-locking-for-MX25L12805D.patch b/target/linux/ath79/patches-5.10/0052-mtd-spi-nor-use-4-bit-locking-for-MX25L12805D.patch
deleted file mode 100644
index e99d067c48a3..000000000000
--- a/target/linux/ath79/patches-5.10/0052-mtd-spi-nor-use-4-bit-locking-for-MX25L12805D.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From a449cd03db4d0e1d292b3734f7676634cfd94f53 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 25 Oct 2020 01:14:22 +0200
-Subject: [PATCH] mtd: spi-nor: use 4 bit locking for MX25L12805D
-
-Macronix MX25L12805D supports locking with 4 block
-protection bits in its status register. Add the corresponding
-flag in order to clear these bits when unloking the flash.
-
-Otherwise, the flash might not be writable depending on the state
-left by the bootloader.
-
-Tested-on: Ubiquiti UniFi AC Lite (ath79)
-
-Fixes commit 62593cf40b23 ("mtd: spi-nor: refactor block protection functions")
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- drivers/mtd/spi-nor/macronix.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/macronix.c
-+++ b/drivers/mtd/spi-nor/macronix.c
-@@ -51,7 +51,8 @@ static const struct flash_info macronix_
- 	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8, SECT_4K) },
- 	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16, SECT_4K) },
- 	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
--	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, SECT_4K) },
-+	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, SECT_4K |
-+			      SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP) },
- 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- 	{ "mx25r1635f",  INFO(0xc22815, 0, 64 * 1024,  32,
- 			      SECT_4K | SPI_NOR_DUAL_READ |
diff --git a/target/linux/ath79/patches-5.10/0062-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch b/target/linux/ath79/patches-5.10/0062-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch
deleted file mode 100644
index f596ddb7336f..000000000000
--- a/target/linux/ath79/patches-5.10/0062-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From: David Bauer <mail@david-bauer.net>
-Date: Sat, 11 Apr 2020 14:03:12 +0200
-Subject: MIPS: pci-ar724x: add QCA9550 reset sequence
-
-The QCA9550 family of SoCs have a slightly different reset
-sequence compared to older chips.
-
-Normally the bootloader performs this sequence, however
-some bootloader implementation expect the operating system
-to clear the reset.
-
-Also get the resets from OF to support handling of the second
-PCIe root-complex on the QCA9558.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -391,6 +391,7 @@
- #define QCA955X_PLL_CPU_CONFIG_REG		0x00
- #define QCA955X_PLL_DDR_CONFIG_REG		0x04
- #define QCA955X_PLL_CLK_CTRL_REG		0x08
-+#define QCA955X_PLL_PCIE_CONFIG_REG		0x0c
- #define QCA955X_PLL_ETH_XMII_CONTROL_REG	0x28
- #define QCA955X_PLL_ETH_SGMII_CONTROL_REG	0x48
- #define QCA955X_PLL_ETH_SGMII_SERDES_REG	0x4c
-@@ -476,6 +477,9 @@
- #define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL	BIT(21)
- #define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
- 
-+#define QCA955X_PLL_PCIE_CONFIG_PLL_PWD			BIT(30)
-+#define QCA955X_PLL_PCIE_CONFIG_PLL_BYPASS		BIT(16)
-+
- #define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB		BIT(5)
- #define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1		BIT(6)
- #define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL		BIT(7)
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -8,6 +8,7 @@
- 
- #include <linux/irq.h>
- #include <linux/pci.h>
-+#include <linux/reset.h>
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/platform_device.h>
-@@ -55,6 +56,9 @@ struct ar724x_pci_controller {
- 	struct irq_domain *domain;
- 	struct resource io_res;
- 	struct resource mem_res;
-+
-+	struct reset_control *hc_reset;
-+	struct reset_control *phy_reset;
- };
- 
- static struct irq_chip ar724x_pci_irq_chip;
-@@ -340,18 +344,30 @@ static void ar724x_pci_hw_init(struct ar
- 	int wait = 0;
- 
- 	/* deassert PCIe host controller and PCIe PHY reset */
--	ath79_device_reset_clear(AR724X_RESET_PCIE);
--	ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
-+	reset_control_deassert(apc->hc_reset);
-+	reset_control_deassert(apc->phy_reset);
- 
--	/* remove the reset of the PCIE PLL */
--	ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
--	ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
--	ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
--
--	/* deassert bypass for the PCIE PLL */
--	ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
--	ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
--	ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+	if (of_device_is_compatible(apc->np, "qcom,qca9550-pci")) {
-+		/* remove the reset of the PCIE PLL */
-+		ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG);
-+		ppl &= ~QCA955X_PLL_PCIE_CONFIG_PLL_PWD;
-+		ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl);
-+
-+		/* deassert bypass for the PCIE PLL */
-+		ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG);
-+		ppl &= ~QCA955X_PLL_PCIE_CONFIG_PLL_BYPASS;
-+		ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl);
-+	} else {
-+		/* remove the reset of the PCIE PLL */
-+		ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+		ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
-+		ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+
-+		/* deassert bypass for the PCIE PLL */
-+		ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+		ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
-+		ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+	}
- 
- 	/* set PCIE Application Control to ready */
- 	app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
-@@ -396,6 +412,14 @@ static int ar724x_pci_probe(struct platf
- 	if (apc->irq < 0)
- 		return -EINVAL;
- 
-+	apc->hc_reset = devm_reset_control_get_exclusive(&pdev->dev, "hc");
-+	if (IS_ERR(apc->hc_reset))
-+		return PTR_ERR(apc->hc_reset);
-+
-+	apc->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, "phy");
-+	if (IS_ERR(apc->phy_reset))
-+		return PTR_ERR(apc->phy_reset);
-+
- 	apc->np = pdev->dev.of_node;
- 	apc->pci_controller.pci_ops = &ar724x_pci_ops;
- 	apc->pci_controller.io_resource = &apc->io_res;
-@@ -406,7 +430,7 @@ static int ar724x_pci_probe(struct platf
- 	 * Do the full PCIE Root Complex Initialization Sequence if the PCIe
- 	 * host controller is in reset.
- 	 */
--	if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
-+	if (reset_control_status(apc->hc_reset))
- 		ar724x_pci_hw_init(apc);
- 
- 	apc->link_up = ar724x_pci_check_link(apc);
-@@ -424,6 +448,7 @@ static int ar724x_pci_probe(struct platf
- 
- static const struct of_device_id ar724x_pci_ids[] = {
- 	{ .compatible = "qcom,ar7240-pci" },
-+	{ .compatible = "qcom,qca9550-pci" },
- 	{},
- };
- 
diff --git a/target/linux/ath79/patches-5.10/401-mtd-nor-support-mtd-name-from-device-tree.patch b/target/linux/ath79/patches-5.10/401-mtd-nor-support-mtd-name-from-device-tree.patch
deleted file mode 100644
index 99985eba40c5..000000000000
--- a/target/linux/ath79/patches-5.10/401-mtd-nor-support-mtd-name-from-device-tree.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From f32bc2aa01edcba2f2ed5db151cf183eac9ef919 Mon Sep 17 00:00:00 2001
-From: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
-Date: Sat, 25 Feb 2017 16:42:50 +0000
-Subject: mtd: nor: support mtd name from device tree
-
-Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/core.c
-+++ b/drivers/mtd/spi-nor/core.c
-@@ -3152,6 +3152,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	struct device *dev = nor->dev;
- 	struct mtd_info *mtd = &nor->mtd;
- 	struct device_node *np = spi_nor_get_flash_node(nor);
-+	const char __maybe_unused *of_mtd_name = NULL;
- 	int ret;
- 	int i;
- 
-@@ -3206,7 +3207,12 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	if (ret)
- 		return ret;
- 
--	if (!mtd->name)
-+#ifdef CONFIG_MTD_OF_PARTS
-+	of_property_read_string(np, "linux,mtd-name", &of_mtd_name);
-+#endif
-+	if (of_mtd_name)
-+		mtd->name = of_mtd_name;
-+	else if (!mtd->name)
- 		mtd->name = dev_name(dev);
- 	mtd->priv = nor;
- 	mtd->type = MTD_NORFLASH;
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -850,6 +850,17 @@ out_error:
-  */
- static void mtd_set_dev_defaults(struct mtd_info *mtd)
- {
-+#ifdef CONFIG_MTD_OF_PARTS
-+	const char __maybe_unused *of_mtd_name = NULL;
-+	struct device_node *np;
-+
-+	np = mtd_get_of_node(mtd);
-+	if (np && !mtd->name) {
-+		of_property_read_string(np, "linux,mtd-name", &of_mtd_name);
-+		if (of_mtd_name)
-+			mtd->name = of_mtd_name;
-+	} else
-+#endif
- 	if (mtd->dev.parent) {
- 		if (!mtd->owner && mtd->dev.parent->driver)
- 			mtd->owner = mtd->dev.parent->driver->owner;
diff --git a/target/linux/ath79/patches-5.10/402-v5.17-spi-ar934x-fix-transfer-and-word-delays.patch b/target/linux/ath79/patches-5.10/402-v5.17-spi-ar934x-fix-transfer-and-word-delays.patch
deleted file mode 100644
index 7ce6df6d7bd6..000000000000
--- a/target/linux/ath79/patches-5.10/402-v5.17-spi-ar934x-fix-transfer-and-word-delays.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From c70282457c380db7deb57c81a6894debc8f88efa Mon Sep 17 00:00:00 2001
-From: Oskari Lemmela <oskari@lemmela.net>
-Date: Wed, 22 Dec 2021 07:59:58 +0200
-Subject: [PATCH] spi: ar934x: fix transfer and word delays
-
-Add missing delay between transferred messages and words.
-
-Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
-Link: https://lore.kernel.org/r/20211222055958.1383233-3-oskari@lemmela.net
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-ar934x.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/spi/spi-ar934x.c
-+++ b/drivers/spi/spi-ar934x.c
-@@ -137,8 +137,10 @@ static int ar934x_spi_transfer_one_messa
- 					reg >>= 8;
- 				}
- 			}
-+			spi_delay_exec(&t->word_delay, t);
- 		}
- 		m->actual_length += t->len;
-+		spi_transfer_delay_exec(t);
- 	}
- 
- msg_done:
diff --git a/target/linux/ath79/patches-5.10/403-v5.17-spi-ar934x-fix-transfer-size.patch b/target/linux/ath79/patches-5.10/403-v5.17-spi-ar934x-fix-transfer-size.patch
deleted file mode 100644
index 87f5da2c60e4..000000000000
--- a/target/linux/ath79/patches-5.10/403-v5.17-spi-ar934x-fix-transfer-size.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From ebe33e5a98dcf14a9630845f3f10c193584ac054 Mon Sep 17 00:00:00 2001
-From: Oskari Lemmela <oskari@lemmela.net>
-Date: Wed, 22 Dec 2021 07:59:57 +0200
-Subject: [PATCH] spi: ar934x: fix transfer size
-
-If bits_per_word is configured, transfer only word amount
-of data per iteration.
-
-Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
-Link: https://lore.kernel.org/r/20211222055958.1383233-2-oskari@lemmela.net
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-ar934x.c | 16 +++++++++++-----
- 1 file changed, 11 insertions(+), 5 deletions(-)
-
---- a/drivers/spi/spi-ar934x.c
-+++ b/drivers/spi/spi-ar934x.c
-@@ -82,7 +82,7 @@ static int ar934x_spi_transfer_one_messa
- 	struct spi_device *spi = m->spi;
- 	unsigned long trx_done, trx_cur;
- 	int stat = 0;
--	u8 term = 0;
-+	u8 bpw, term = 0;
- 	int div, i;
- 	u32 reg;
- 	const u8 *tx_buf;
-@@ -90,6 +90,11 @@ static int ar934x_spi_transfer_one_messa
- 
- 	m->actual_length = 0;
- 	list_for_each_entry(t, &m->transfers, transfer_list) {
-+		if (t->bits_per_word >= 8 && t->bits_per_word < 32)
-+			bpw = t->bits_per_word >> 3;
-+		else
-+			bpw = 4;
-+
- 		if (t->speed_hz)
- 			div = ar934x_spi_clk_div(sp, t->speed_hz);
- 		else
-@@ -105,10 +110,10 @@ static int ar934x_spi_transfer_one_messa
- 		iowrite32(reg, sp->base + AR934X_SPI_REG_CTRL);
- 		iowrite32(0, sp->base + AR934X_SPI_DATAOUT);
- 
--		for (trx_done = 0; trx_done < t->len; trx_done += 4) {
-+		for (trx_done = 0; trx_done < t->len; trx_done += bpw) {
- 			trx_cur = t->len - trx_done;
--			if (trx_cur > 4)
--				trx_cur = 4;
-+			if (trx_cur > bpw)
-+				trx_cur = bpw;
- 			else if (list_is_last(&t->transfer_list, &m->transfers))
- 				term = 1;
- 
-@@ -193,7 +198,8 @@ static int ar934x_spi_probe(struct platf
- 	ctlr->mode_bits = SPI_LSB_FIRST;
- 	ctlr->setup = ar934x_spi_setup;
- 	ctlr->transfer_one_message = ar934x_spi_transfer_one_message;
--	ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
-+	ctlr->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(24) |
-+				   SPI_BPW_MASK(16) | SPI_BPW_MASK(8);
- 	ctlr->dev.of_node = pdev->dev.of_node;
- 	ctlr->num_chipselect = 3;
- 
diff --git a/target/linux/ath79/patches-5.10/404-mtd-cybertan-trx-parser.patch b/target/linux/ath79/patches-5.10/404-mtd-cybertan-trx-parser.patch
deleted file mode 100644
index 4e8e536e2945..000000000000
--- a/target/linux/ath79/patches-5.10/404-mtd-cybertan-trx-parser.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Christian Lamparter <chunkeey@gmail.com>
-Subject: [PATCH] ath79: port cybertan_part from ar71xx
-
-This patch ports the cybertan_part code from ar71xx and converts the
-driver to a DT-supported mtd parser. As a result, it will no longer
-add the u-boot, nvram and art partitions, which were never part of
-the special Cybertan header.
-
-Instead these partitions have to be specified in the DT, which has the
-upside of making it possible to add properties (i.e.: read-only), labels
-and references to these important partitions.
-
-Submitted-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/mtd/parsers/Makefile                  | 1 +
- drivers/mtd/parsers/Kconfig                   | 8 ++++++++
- 2 files changed, 9 insertions(+)
-
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_OF_PARTS)		+= ofpart.o
- ofpart-y				+= ofpart_core.o
- ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908)	+= ofpart_bcm4908.o
- ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o
-+obj-$(CONFIG_MTD_PARSER_CYBERTAN)	+= parser_cybertan.o
- obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
- obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
- obj-$(CONFIG_MTD_PARSER_TPLINK_SAFELOADER)	+= tplink_safeloader.o
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -102,6 +102,14 @@ config MTD_OF_PARTS_LINKSYS_NS
- 	  two "firmware" partitions. Currently used firmware has to be detected
- 	  using CFE environment variable.
- 
-+config MTD_PARSER_CYBERTAN
-+	tristate "Parser for Cybertan format partitions"
-+	depends on MTD && (ATH79 || COMPILE_TEST)
-+	help
-+	  Cybertan has a proprietory header than encompasses a Broadcom trx
-+	  header. This driver will parse the header and take care of the
-+	  special offsets that result in the extra headers.
-+
- config MTD_PARSER_IMAGETAG
- 	tristate "Parser for BCM963XX Image Tag format partitions"
- 	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
diff --git a/target/linux/ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch b/target/linux/ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch
deleted file mode 100644
index 51a71c6ef2fd..000000000000
--- a/target/linux/ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 8d8cdb4a6ccee5b62cc0dc64651c3946364514dc Mon Sep 17 00:00:00 2001
-From: Luiz Angelo Daros de Luca <luizluca@gmail.com>
-Date: Mon, 10 Feb 2020 16:11:27 -0300
-Subject: [PATCH] spi: ath79: Implement the spi_mem interface
-
-Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
----
- drivers/spi/spi-ath79.c | 35 +++++++++++++++++++++++++++++++++++
- 1 file changed, 35 insertions(+)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -15,6 +15,7 @@
- #include <linux/platform_device.h>
- #include <linux/io.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/spi-mem.h>
- #include <linux/spi/spi_bitbang.h>
- #include <linux/bitops.h>
- #include <linux/clk.h>
-@@ -133,6 +134,39 @@ static u32 ath79_spi_txrx_mode0(struct s
- 	return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
- }
- 
-+static int ath79_exec_mem_op(struct spi_mem *mem,
-+                              const struct spi_mem_op *op)
-+{
-+	struct ath79_spi *sp = ath79_spidev_to_sp(mem->spi);
-+
-+	/* Ensures that reading is performed on device connected
-+	   to hardware cs0 */
-+	if (mem->spi->chip_select || mem->spi->cs_gpiod)
-+		return -ENOTSUPP;
-+
-+	/* Only use for fast-read op. */
-+	if (op->cmd.opcode != 0x0b || op->data.dir != SPI_MEM_DATA_IN ||
-+	    op->addr.nbytes != 3 || op->dummy.nbytes != 1)
-+		return -ENOTSUPP;
-+
-+	/* disable GPIO mode */
-+	ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
-+
-+	memcpy_fromio(op->data.buf.in, sp->base + op->addr.val, op->data.nbytes);
-+
-+	/* enable GPIO mode */
-+	ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
-+
-+	/* restore IOC register */
-+	ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
-+
-+	return 0;
-+}
-+
-+static const struct spi_controller_mem_ops ath79_mem_ops = {
-+	.exec_op = ath79_exec_mem_op,
-+};
-+
- static int ath79_spi_probe(struct platform_device *pdev)
- {
- 	struct spi_master *master;
-@@ -164,6 +198,7 @@ static int ath79_spi_probe(struct platfo
- 		ret = PTR_ERR(sp->base);
- 		goto err_put_master;
- 	}
-+	master->mem_ops = &ath79_mem_ops;
- 
- 	sp->clk = devm_clk_get(&pdev->dev, "ahb");
- 	if (IS_ERR(sp->clk)) {
diff --git a/target/linux/ath79/patches-5.10/412-spi-ath79-set-number-of-chipselect-lines.patch b/target/linux/ath79/patches-5.10/412-spi-ath79-set-number-of-chipselect-lines.patch
deleted file mode 100644
index 614bcbcded3d..000000000000
--- a/target/linux/ath79/patches-5.10/412-spi-ath79-set-number-of-chipselect-lines.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From e2e9f6d9f9bd7449ff113c157b639ce1a24b9d3f Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sat, 24 Apr 2021 16:14:48 +0200
-Subject: [PATCH 2/2] spi: ath79: set number of chipselect lines
-
-All chipsets from AR7100 up to QCA9563 have three dedicated chipselect
-lines for the integrated SPI controller. Remove the number of
-chipselects from the platform data, as there is no need to manually set
-this to a different value.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- drivers/spi/spi-ath79.c                 | 2 +-
- include/linux/platform_data/spi-ath79.h | 1 -
- 2 files changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -187,6 +187,7 @@ static int ath79_spi_probe(struct platfo
- 	master->use_gpio_descriptors = true;
- 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
- 	master->flags = SPI_MASTER_GPIO_SS;
-+	master->num_chipselect = 3;
- 
- 	sp->bitbang.master = master;
- 	sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ath79/patches-5.10/420-net-use-downstream-ag71xx.patch b/target/linux/ath79/patches-5.10/420-net-use-downstream-ag71xx.patch
deleted file mode 100644
index 65867c1cd5ea..000000000000
--- a/target/linux/ath79/patches-5.10/420-net-use-downstream-ag71xx.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: John Crispin <john@phrozen.org>
-Subject: [PATCH] ath79: add new OF only target for QCA MIPS silicon
-
-This target aims to replace ar71xx mid-term. The big part that is still
-missing is making the MMIO/AHB wifi work using OF. NAND and mikrotik
-subtargets will follow.
-
-Submitted-by: John Crispin <john@phrozen.org>
----
- drivers/net/ethernet/atheros/Kconfig          | 8 +-------
- drivers/net/ethernet/atheros/Makefile         | 2 +-
- 2 files changed, 2 insertions(+), 8 deletions(-)
-
---- a/drivers/net/ethernet/atheros/Kconfig
-+++ b/drivers/net/ethernet/atheros/Kconfig
-@@ -17,13 +17,7 @@ config NET_VENDOR_ATHEROS
- 
- if NET_VENDOR_ATHEROS
- 
--config AG71XX
--	tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support"
--	depends on ATH79
--	select PHYLINK
--	help
--	  If you wish to compile a kernel for AR7XXX/91XXX and enable
--	  ethernet support, then you should always answer Y to this.
-+source "drivers/net/ethernet/atheros/ag71xx/Kconfig"
- 
- config ATL2
- 	tristate "Atheros L2 Fast Ethernet support"
---- a/drivers/net/ethernet/atheros/Makefile
-+++ b/drivers/net/ethernet/atheros/Makefile
-@@ -3,7 +3,7 @@
- # Makefile for the Atheros network device drivers.
- #
- 
--obj-$(CONFIG_AG71XX) += ag71xx.o
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_ATL1) += atlx/
- obj-$(CONFIG_ATL2) += atlx/
- obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/linux/ath79/patches-5.10/425-at803x-allow-sgmii-aneg-override.patch b/target/linux/ath79/patches-5.10/425-at803x-allow-sgmii-aneg-override.patch
deleted file mode 100644
index ef1e5a6b4a33..000000000000
--- a/target/linux/ath79/patches-5.10/425-at803x-allow-sgmii-aneg-override.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: David Bauer <mail@david-bauer.net>
-Subject: [PATCH] ath79: allow to override AR8033 SGMII aneg status
-
-In order to make the QCA955x SGMII workaround work, the unsuccessful
-SGMII autonegotiation on the AR8033 should not block the PHY
-state-machine.
-
-Otherwise, the ag71xx driver never becomes aware of the copper-side
-link-establishment and the workaround is never executed.
-
-Submitted-by: David Bauer <mail@david-bauer.net>
-Submitted-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
----
- drivers/net/phy/at803x.c-override.patch          | 7 +++++++
- 1 files changed, 7 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -959,6 +959,13 @@ static int at803x_aneg_done(struct phy_d
- 	if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
- 		phydev_warn(phydev, "803x_aneg_done: SGMII link is not ok\n");
- 		aneg_done = 0;
-+#ifdef CONFIG_OF_MDIO
-+		if (phydev->mdio.dev.of_node &&
-+				of_property_read_bool(phydev->mdio.dev.of_node,
-+				"at803x-override-sgmii-link-check")) {
-+			aneg_done = 1;
-+		}
-+#endif
- 	}
- 	/* switch back to copper page */
- 	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
diff --git a/target/linux/ath79/patches-5.10/430-drivers-link-spi-before-mtd.patch b/target/linux/ath79/patches-5.10/430-drivers-link-spi-before-mtd.patch
deleted file mode 100644
index cba537408a57..000000000000
--- a/target/linux/ath79/patches-5.10/430-drivers-link-spi-before-mtd.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: [PATCH] ar71xx: Link SPI before MTD
-
-SVN-Revision: 22863
----
- drivers/Makefile                              |   2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -81,8 +81,8 @@ obj-y				+= scsi/
- obj-y				+= nvme/
- obj-$(CONFIG_ATA)		+= ata/
- obj-$(CONFIG_TARGET_CORE)	+= target/
--obj-$(CONFIG_MTD)		+= mtd/
- obj-$(CONFIG_SPI)		+= spi/
-+obj-$(CONFIG_MTD)		+= mtd/
- obj-$(CONFIG_SPMI)		+= spmi/
- obj-$(CONFIG_HSI)		+= hsi/
- obj-$(CONFIG_SLIMBUS)		+= slimbus/
diff --git a/target/linux/ath79/patches-5.10/440-mtd-ar934x-nand-driver.patch b/target/linux/ath79/patches-5.10/440-mtd-ar934x-nand-driver.patch
deleted file mode 100644
index 366cf5118e73..000000000000
--- a/target/linux/ath79/patches-5.10/440-mtd-ar934x-nand-driver.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x
-
-SVN-Revision: 33385
----
- drivers/mtd/nand/raw/Kconfig                  | 8 ++++++++
- drivers/mtd/nand/raw/Makefile                 | 1 +
- 2 files changed, 9 insertions(+)
-
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -556,4 +556,12 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
- 	  load time (assuming you build diskonchip as a module) with the module
- 	  parameter "inftl_bbt_write=1".
- 
-+config MTD_NAND_AR934X
-+	tristate "Support for NAND controller on Qualcomm Atheros AR934x/QCA955x SoCs"
-+	depends on ATH79 || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	help
-+	  Enables support for NAND controller on Qualcomm Atheros SoCs.
-+	  This controller is found on AR934x and QCA955x SoCs.
-+
- endif # MTD_RAW_NAND
---- a/drivers/mtd/nand/raw/Makefile
-+++ b/drivers/mtd/nand/raw/Makefile
-@@ -58,6 +58,7 @@ obj-$(CONFIG_MTD_NAND_STM32_FMC2)	+= stm
- obj-$(CONFIG_MTD_NAND_MESON)		+= meson_nand.o
- obj-$(CONFIG_MTD_NAND_CADENCE)		+= cadence-nand-controller.o
- obj-$(CONFIG_MTD_NAND_ARASAN)		+= arasan-nand-controller.o
-+obj-$(CONFIG_MTD_NAND_AR934X)		+= ar934x_nand.o
- 
- nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
- nand-objs += nand_onfi.o
diff --git a/target/linux/ath79/patches-5.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ath79/patches-5.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
deleted file mode 100644
index 3b8fee2269a4..000000000000
--- a/target/linux/ath79/patches-5.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: [PATCH] ar71xx: swizzle address for PCI byte/word access on AR71xx
-
-Closes #11683.
-
-SVN-Revision: 32639
----
- .../mips/include/asm/mach-ath79/mangle-port.h | 111 ++++++++++++++++++
- 1 file changed, 111 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-ath79/mangle-port.h
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
-@@ -0,0 +1,37 @@
-+/*
-+ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
-+ *      Copyright (C) 2003, 2004 Ralf Baechle
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
-+#define __ASM_MACH_ATH79_MANGLE_PORT_H
-+
-+#ifdef CONFIG_PCI_AR71XX
-+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
-+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
-+#else
-+#define ath79_pci_swizzle_b(port) (port)
-+#define ath79_pci_swizzle_w(port) (port)
-+#endif
-+
-+#define __swizzle_addr_b(port)	ath79_pci_swizzle_b(port)
-+#define __swizzle_addr_w(port)	ath79_pci_swizzle_w(port)
-+#define __swizzle_addr_l(port)	(port)
-+#define __swizzle_addr_q(port)	(port)
-+
-+# define ioswabb(a, x)           (x)
-+# define __mem_ioswabb(a, x)     (x)
-+# define ioswabw(a, x)           (x)
-+# define __mem_ioswabw(a, x)     cpu_to_le16(x)
-+# define ioswabl(a, x)           (x)
-+# define __mem_ioswabl(a, x)     cpu_to_le32(x)
-+# define ioswabq(a, x)           (x)
-+# define __mem_ioswabq(a, x)     cpu_to_le64(x)
-+
-+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -68,6 +68,45 @@ static const u32 ar71xx_pci_read_mask[8]
- 	0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0
- };
- 
-+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
-+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
-+
-+static inline bool ar71xx_is_pci_addr(unsigned long port)
-+{
-+	unsigned long phys = CPHYSADDR(port);
-+
-+	return (phys >= AR71XX_PCI_MEM_BASE &&
-+		phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
-+{
-+	return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
-+{
-+	return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
-+}
-+
-+unsigned long ath79_pci_swizzle_b(unsigned long port)
-+{
-+	if (__ath79_pci_swizzle_b)
-+		return __ath79_pci_swizzle_b(port);
-+
-+	return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_b);
-+
-+unsigned long ath79_pci_swizzle_w(unsigned long port)
-+{
-+	if (__ath79_pci_swizzle_w)
-+		return __ath79_pci_swizzle_w(port);
-+
-+	return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_w);
-+
- static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
- {
- 	u32 t;
-@@ -276,6 +315,9 @@ static int ar71xx_pci_probe(struct platf
- 
- 	register_pci_controller(&apc->pci_ctrl);
- 
-+	__ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
-+	__ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
-+
- 	return 0;
- }
- 
diff --git a/target/linux/ath79/patches-5.10/900-mdio_bitbang_ignore_ta_value.patch b/target/linux/ath79/patches-5.10/900-mdio_bitbang_ignore_ta_value.patch
deleted file mode 100644
index d35b53638a0d..000000000000
--- a/target/linux/ath79/patches-5.10/900-mdio_bitbang_ignore_ta_value.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: ar71xx: add a workaround for ar8316 not always driving the TA bit to low
-
-AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit
-to low despite returning a valid value. Ignore it and just use the
-returned value anyway.
-
-SVN-Revision: 28422
----
- drivers/net/mdio/mdio-bitbang.c               | 16 ++-----------------
- 1 file changed, 2 insertions(+), 14 deletions(-)
-
---- a/drivers/net/mdio/mdio-bitbang.c
-+++ b/drivers/net/mdio/mdio-bitbang.c
-@@ -152,7 +152,7 @@ static int mdiobb_cmd_addr(struct mdiobb
- static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
- {
- 	struct mdiobb_ctrl *ctrl = bus->priv;
--	int ret, i;
-+	int ret;
- 
- 	if (reg & MII_ADDR_C45) {
- 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
-@@ -162,19 +162,7 @@ static int mdiobb_read(struct mii_bus *b
- 
- 	ctrl->ops->set_mdio_dir(ctrl, 0);
- 
--	/* check the turnaround bit: the PHY should be driving it to zero, if this
--	 * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that
--	 */
--	if (mdiobb_get_bit(ctrl) != 0 &&
--	    !(bus->phy_ignore_ta_mask & (1 << phy))) {
--		/* PHY didn't drive TA low -- flush any bits it
--		 * may be trying to send.
--		 */
--		for (i = 0; i < 32; i++)
--			mdiobb_get_bit(ctrl);
--
--		return 0xffff;
--	}
-+	mdiobb_get_bit(ctrl);
- 
- 	ret = mdiobb_get_num(ctrl, 16);
- 	mdiobb_get_bit(ctrl);
diff --git a/target/linux/ath79/patches-5.10/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch b/target/linux/ath79/patches-5.10/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
deleted file mode 100644
index e6fae3349d53..000000000000
--- a/target/linux/ath79/patches-5.10/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 16 Jun 2015 13:15:08 +0200
-Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command
-
-It seems some phys have some maximum timings for accessing the MDIO line,
-resulting in bit errors under cpu stress. Prevent this from happening by
-disabling interrupts when sending commands.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/mdio/mdio-bitbang.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/mdio/mdio-bitbang.c
-+++ b/drivers/net/mdio/mdio-bitbang.c
-@@ -15,6 +15,7 @@
-  */
- 
- #include <linux/delay.h>
-+#include <linux/irqflags.h>
- #include <linux/mdio-bitbang.h>
- #include <linux/module.h>
- #include <linux/types.h>
-@@ -153,7 +154,9 @@ static int mdiobb_read(struct mii_bus *b
- {
- 	struct mdiobb_ctrl *ctrl = bus->priv;
- 	int ret;
-+	unsigned long flags;
- 
-+	local_irq_save(flags);
- 	if (reg & MII_ADDR_C45) {
- 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
- 		mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
-@@ -166,13 +169,17 @@ static int mdiobb_read(struct mii_bus *b
- 
- 	ret = mdiobb_get_num(ctrl, 16);
- 	mdiobb_get_bit(ctrl);
-+	local_irq_restore(flags);
-+
- 	return ret;
- }
- 
- static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
- {
- 	struct mdiobb_ctrl *ctrl = bus->priv;
-+	unsigned long flags;
- 
-+	local_irq_save(flags);
- 	if (reg & MII_ADDR_C45) {
- 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
- 		mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
-@@ -187,6 +194,8 @@ static int mdiobb_write(struct mii_bus *
- 
- 	ctrl->ops->set_mdio_dir(ctrl, 0);
- 	mdiobb_get_bit(ctrl);
-+	local_irq_restore(flags);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch b/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch
deleted file mode 100644
index 2ec0c2b9acad..000000000000
--- a/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch
+++ /dev/null
@@ -1,903 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Subject: [PATCH] ar71xx: fix unaligned access in a few more places
-
-SVN-Revision: 35130
----
- arch/mips/include/asm/checksum.h              | 83 +++---------------
- include/uapi/linux/ip.h                       |  2 +-
- include/uapi/linux/ipv6.h                     |  2 +-
- include/uapi/linux/tcp.h                      |  4 ++--
- include/uapi/linux/udp.h                      |  2 +-
- net/netfilter/nf_conntrack_core.c             |  4 ++--
- include/uapi/linux/icmp.h                     |  2 +-
- include/uapi/linux/in6.h                      |  2 +-
- net/ipv6/tcp_ipv6.c                           |  9 +++--
- net/ipv6/datagram.c                           |  6 ++--
- net/ipv6/exthdrs.c                            |  2 +-
- include/linux/types.h                         |  5 +++
- net/ipv4/af_inet.c                            |  4 ++--
- net/ipv4/tcp_output.c                         | 69 +++++++++--------
- include/uapi/linux/igmp.h                     |  8 +++---
- net/core/flow_dissector.c                     |  2 +-
- include/uapi/linux/icmpv6.h                   |  2 +-
- include/net/ndisc.h                           | 10 ++++----
- net/sched/cls_u32.c                           |  6 +++---
- net/ipv6/ip6_offload.c                        |  2 +-
- include/net/addrconf.h                        |  2 +-
- include/net/inet_ecn.h                        |  4 ++--
- include/net/ipv6.h                            | 23 +++++----
- include/net/secure_seq.h                      |  1 +
- include/uapi/linux/in.h                       |  2 +-
- net/ipv6/ip6_fib.h                            |  2 +-
- net/netfilter/nf_conntrack_proto_tcp.c        |  2 +-
- net/xfrm/xfrm_input.c                         |  4 ++--
- net/ipv4/tcp_input.c                          | 12 ++++---
- include/uapi/linux/if_pppox.h                 |  1 +
- net/ipv6/netfilter/nf_log_ipv6.c              |  4 ++--
- include/net/neighbour.h                       |  6 +++--
- include/uapi/linux/netfilter_arp/arp_tables.h |  2 +-
- net/core/utils.c                              | 10 +++++--
- include/linux/etherdevice.h                   | 11 ++++---
- net/ipv4/tcp_offload.c                        |  6 +++---
- net/ipv6/netfilter/ip6table_mangle.c          |  4 ++--
- 37 file changed, 171 insertions(+), 141 deletions(-)
-
---- a/arch/mips/include/asm/checksum.h
-+++ b/arch/mips/include/asm/checksum.h
-@@ -100,26 +100,30 @@ static inline __sum16 ip_fast_csum(const
- 	const unsigned int *stop = word + ihl;
- 	unsigned int csum;
- 	int carry;
-+	unsigned int w;
- 
--	csum = word[0];
--	csum += word[1];
--	carry = (csum < word[1]);
-+	csum = net_hdr_word(word++);
-+
-+	w = net_hdr_word(word++);
-+	csum += w;
-+	carry = (csum < w);
- 	csum += carry;
- 
--	csum += word[2];
--	carry = (csum < word[2]);
-+	w = net_hdr_word(word++);
-+	csum += w;
-+	carry = (csum < w);
- 	csum += carry;
- 
--	csum += word[3];
--	carry = (csum < word[3]);
-+	w = net_hdr_word(word++);
-+	csum += w;
-+	carry = (csum < w);
- 	csum += carry;
- 
--	word += 4;
- 	do {
--		csum += *word;
--		carry = (csum < *word);
-+		w = net_hdr_word(word++);
-+		csum += w;
-+		carry = (csum < w);
- 		csum += carry;
--		word++;
- 	} while (word != stop);
- 
- 	return csum_fold(csum);
-@@ -180,73 +184,6 @@ static inline __sum16 ip_compute_csum(co
- 	return csum_fold(csum_partial(buff, len, 0));
- }
- 
--#define _HAVE_ARCH_IPV6_CSUM
--static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
--					  const struct in6_addr *daddr,
--					  __u32 len, __u8 proto,
--					  __wsum sum)
--{
--	__wsum tmp;
--
--	__asm__(
--	"	.set	push		# csum_ipv6_magic\n"
--	"	.set	noreorder	\n"
--	"	.set	noat		\n"
--	"	addu	%0, %5		# proto (long in network byte order)\n"
--	"	sltu	$1, %0, %5	\n"
--	"	addu	%0, $1		\n"
--
--	"	addu	%0, %6		# csum\n"
--	"	sltu	$1, %0, %6	\n"
--	"	lw	%1, 0(%2)	# four words source address\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 4(%2)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 8(%2)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 12(%2)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 0(%3)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 4(%3)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 8(%3)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 12(%3)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	addu	%0, $1		# Add final carry\n"
--	"	.set	pop"
--	: "=&r" (sum), "=&r" (tmp)
--	: "r" (saddr), "r" (daddr),
--	  "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
--
--	return csum_fold(sum);
--}
--
- #include <asm-generic/checksum.h>
- #endif /* CONFIG_GENERIC_CSUM */
- 
---- a/include/uapi/linux/ip.h
-+++ b/include/uapi/linux/ip.h
-@@ -106,7 +106,7 @@ struct iphdr {
- 		__be32	daddr;
- 	);
- 	/*The options start here. */
--};
-+} __attribute__((packed, aligned(2)));
- 
- 
- struct ip_auth_hdr {
---- a/include/uapi/linux/ipv6.h
-+++ b/include/uapi/linux/ipv6.h
-@@ -135,7 +135,7 @@ struct ipv6hdr {
- 		struct	in6_addr	saddr;
- 		struct	in6_addr	daddr;
- 	);
--};
-+} __attribute__((packed, aligned(2)));
- 
- 
- /* index values for the variables in ipv6_devconf */
---- a/include/uapi/linux/tcp.h
-+++ b/include/uapi/linux/tcp.h
-@@ -55,7 +55,7 @@ struct tcphdr {
- 	__be16	window;
- 	__sum16	check;
- 	__be16	urg_ptr;
--};
-+} __attribute__((packed, aligned(2)));
- 
- /*
-  *	The union cast uses a gcc extension to avoid aliasing problems
-@@ -65,7 +65,7 @@ struct tcphdr {
- union tcp_word_hdr { 
- 	struct tcphdr hdr;
- 	__be32 		  words[5];
--}; 
-+} __attribute__((packed, aligned(2)));
- 
- #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
- 
---- a/include/uapi/linux/udp.h
-+++ b/include/uapi/linux/udp.h
-@@ -25,7 +25,7 @@ struct udphdr {
- 	__be16	dest;
- 	__be16	len;
- 	__sum16	check;
--};
-+} __attribute__((packed, aligned(2)));
- 
- /* UDP socket options */
- #define UDP_CORK	1	/* Never send partially complete segments */
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -271,8 +271,8 @@ nf_ct_get_tuple(const struct sk_buff *sk
- 
- 	switch (l3num) {
- 	case NFPROTO_IPV4:
--		tuple->src.u3.ip = ap[0];
--		tuple->dst.u3.ip = ap[1];
-+		tuple->src.u3.ip = net_hdr_word(ap++);
-+		tuple->dst.u3.ip = net_hdr_word(ap);
- 		break;
- 	case NFPROTO_IPV6:
- 		memcpy(tuple->src.u3.ip6, ap, sizeof(tuple->src.u3.ip6));
---- a/include/uapi/linux/icmp.h
-+++ b/include/uapi/linux/icmp.h
-@@ -83,7 +83,7 @@ struct icmphdr {
- 	} frag;
- 	__u8	reserved[4];
-   } un;
--};
-+} __attribute__((packed, aligned(2)));
- 
- 
- /*
---- a/include/uapi/linux/in6.h
-+++ b/include/uapi/linux/in6.h
-@@ -43,7 +43,7 @@ struct in6_addr {
- #define s6_addr16		in6_u.u6_addr16
- #define s6_addr32		in6_u.u6_addr32
- #endif
--};
-+} __attribute__((packed, aligned(2)));
- #endif /* __UAPI_DEF_IN6_ADDR */
- 
- #if __UAPI_DEF_SOCKADDR_IN6
---- a/net/ipv6/tcp_ipv6.c
-+++ b/net/ipv6/tcp_ipv6.c
-@@ -35,6 +35,7 @@
- #include <linux/ipsec.h>
- #include <linux/times.h>
- #include <linux/slab.h>
-+#include <asm/unaligned.h>
- #include <linux/uaccess.h>
- #include <linux/ipv6.h>
- #include <linux/icmpv6.h>
-@@ -927,10 +928,10 @@ static void tcp_v6_send_response(const s
- 	topt = (__be32 *)(t1 + 1);
- 
- 	if (tsecr) {
--		*topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
--				(TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
--		*topt++ = htonl(tsval);
--		*topt++ = htonl(tsecr);
-+		put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+				(TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
-+		put_unaligned_be32(tsval, topt++);
-+		put_unaligned_be32(tsecr, topt++);
- 	}
- 
- #ifdef CONFIG_TCP_MD5SIG
---- a/net/ipv6/datagram.c
-+++ b/net/ipv6/datagram.c
-@@ -492,7 +492,7 @@ int ipv6_recv_error(struct sock *sk, str
- 				ipv6_iface_scope_id(&sin->sin6_addr,
- 						    IP6CB(skb)->iif);
- 		} else {
--			ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
-+			ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
- 					       &sin->sin6_addr);
- 			sin->sin6_scope_id = 0;
- 		}
-@@ -846,12 +846,12 @@ int ip6_datagram_send_ctl(struct net *ne
- 			}
- 
- 			if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
--				if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
-+				if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
- 					err = -EINVAL;
- 					goto exit_f;
- 				}
- 			}
--			fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
-+			fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
- 			break;
- 
- 		case IPV6_2292HOPOPTS:
---- a/net/ipv6/exthdrs.c
-+++ b/net/ipv6/exthdrs.c
-@@ -948,7 +948,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
- 		goto drop;
- 	}
- 
--	pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
-+	pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
- 	if (pkt_len <= IPV6_MAXPLEN) {
- 		__IP6_INC_STATS(net, idev, IPSTATS_MIB_INHDRERRORS);
- 		icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, optoff+2);
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -227,5 +227,11 @@ typedef void (*swap_func_t)(void *a, voi
- typedef int (*cmp_r_func_t)(const void *a, const void *b, const void *priv);
- typedef int (*cmp_func_t)(const void *a, const void *b);
- 
-+struct net_hdr_word {
-+       u32 words[1];
-+} __attribute__((packed, aligned(2)));
-+
-+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
-+
- #endif /*  __ASSEMBLY__ */
- #endif /* _LINUX_TYPES_H */
---- a/net/ipv4/af_inet.c
-+++ b/net/ipv4/af_inet.c
-@@ -1469,8 +1469,8 @@ struct sk_buff *inet_gro_receive(struct
- 	if (unlikely(ip_fast_csum((u8 *)iph, 5)))
- 		goto out_unlock;
- 
--	id = ntohl(*(__be32 *)&iph->id);
--	flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
-+	id = ntohl(net_hdr_word(&iph->id));
-+	flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF));
- 	id >>= 16;
- 
- 	list_for_each_entry(p, head, list) {
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -609,48 +609,53 @@ static void tcp_options_write(__be32 *pt
- 	u16 options = opts->options;	/* mungable copy */
- 
- 	if (unlikely(OPTION_MD5 & options)) {
--		*ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
--			       (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+			      (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
- 		/* overload cookie hash location */
- 		opts->hash_location = (__u8 *)ptr;
- 		ptr += 4;
- 	}
- 
- 	if (unlikely(opts->mss)) {
--		*ptr++ = htonl((TCPOPT_MSS << 24) |
--			       (TCPOLEN_MSS << 16) |
--			       opts->mss);
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
-+			      opts->mss);
- 	}
- 
- 	if (likely(OPTION_TS & options)) {
- 		if (unlikely(OPTION_SACK_ADVERTISE & options)) {
--			*ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
--				       (TCPOLEN_SACK_PERM << 16) |
--				       (TCPOPT_TIMESTAMP << 8) |
--				       TCPOLEN_TIMESTAMP);
-+			net_hdr_word(ptr++) =
-+				htonl((TCPOPT_SACK_PERM << 24) |
-+				      (TCPOLEN_SACK_PERM << 16) |
-+				      (TCPOPT_TIMESTAMP << 8) |
-+				      TCPOLEN_TIMESTAMP);
- 			options &= ~OPTION_SACK_ADVERTISE;
- 		} else {
--			*ptr++ = htonl((TCPOPT_NOP << 24) |
--				       (TCPOPT_NOP << 16) |
--				       (TCPOPT_TIMESTAMP << 8) |
--				       TCPOLEN_TIMESTAMP);
-+			net_hdr_word(ptr++) =
-+				htonl((TCPOPT_NOP << 24) |
-+				      (TCPOPT_NOP << 16) |
-+				      (TCPOPT_TIMESTAMP << 8) |
-+				      TCPOLEN_TIMESTAMP);
- 		}
--		*ptr++ = htonl(opts->tsval);
--		*ptr++ = htonl(opts->tsecr);
-+		net_hdr_word(ptr++) = htonl(opts->tsval);
-+		net_hdr_word(ptr++) = htonl(opts->tsecr);
- 	}
- 
- 	if (unlikely(OPTION_SACK_ADVERTISE & options)) {
--		*ptr++ = htonl((TCPOPT_NOP << 24) |
--			       (TCPOPT_NOP << 16) |
--			       (TCPOPT_SACK_PERM << 8) |
--			       TCPOLEN_SACK_PERM);
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_NOP << 24) |
-+			      (TCPOPT_NOP << 16) |
-+			      (TCPOPT_SACK_PERM << 8) |
-+			      TCPOLEN_SACK_PERM);
- 	}
- 
- 	if (unlikely(OPTION_WSCALE & options)) {
--		*ptr++ = htonl((TCPOPT_NOP << 24) |
--			       (TCPOPT_WINDOW << 16) |
--			       (TCPOLEN_WINDOW << 8) |
--			       opts->ws);
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_NOP << 24) |
-+			      (TCPOPT_WINDOW << 16) |
-+			      (TCPOLEN_WINDOW << 8) |
-+			      opts->ws);
- 	}
- 
- 	if (unlikely(opts->num_sack_blocks)) {
-@@ -658,16 +663,17 @@ static void tcp_options_write(__be32 *pt
- 			tp->duplicate_sack : tp->selective_acks;
- 		int this_sack;
- 
--		*ptr++ = htonl((TCPOPT_NOP  << 24) |
--			       (TCPOPT_NOP  << 16) |
--			       (TCPOPT_SACK <<  8) |
--			       (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_NOP << 24) |
-+			      (TCPOPT_NOP << 16) |
-+			      (TCPOPT_SACK << 8) |
-+			      (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
- 						     TCPOLEN_SACK_PERBLOCK)));
- 
- 		for (this_sack = 0; this_sack < opts->num_sack_blocks;
- 		     ++this_sack) {
--			*ptr++ = htonl(sp[this_sack].start_seq);
--			*ptr++ = htonl(sp[this_sack].end_seq);
-+			net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
-+			net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
- 		}
- 
- 		tp->rx_opt.dsack = 0;
-@@ -680,13 +686,14 @@ static void tcp_options_write(__be32 *pt
- 
- 		if (foc->exp) {
- 			len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;
--			*ptr = htonl((TCPOPT_EXP << 24) | (len << 16) |
-+			net_hdr_word(ptr) =
-+				htonl((TCPOPT_EXP << 24) | (len << 16) |
- 				     TCPOPT_FASTOPEN_MAGIC);
- 			p += TCPOLEN_EXP_FASTOPEN_BASE;
- 		} else {
- 			len = TCPOLEN_FASTOPEN_BASE + foc->len;
--			*p++ = TCPOPT_FASTOPEN;
--			*p++ = len;
-+			net_hdr_word(p++) = TCPOPT_FASTOPEN;
-+			net_hdr_word(p++) = len;
- 		}
- 
- 		memcpy(p, foc->val, foc->len);
---- a/include/uapi/linux/igmp.h
-+++ b/include/uapi/linux/igmp.h
-@@ -33,7 +33,7 @@ struct igmphdr {
- 	__u8 code;		/* For newer IGMP */
- 	__sum16 csum;
- 	__be32 group;
--};
-+} __attribute__((packed, aligned(2)));
- 
- /* V3 group record types [grec_type] */
- #define IGMPV3_MODE_IS_INCLUDE		1
-@@ -49,7 +49,7 @@ struct igmpv3_grec {
- 	__be16	grec_nsrcs;
- 	__be32	grec_mca;
- 	__be32	grec_src[0];
--};
-+} __attribute__((packed, aligned(2)));
- 
- struct igmpv3_report {
- 	__u8 type;
-@@ -58,7 +58,7 @@ struct igmpv3_report {
- 	__be16 resv2;
- 	__be16 ngrec;
- 	struct igmpv3_grec grec[0];
--};
-+} __attribute__((packed, aligned(2)));
- 
- struct igmpv3_query {
- 	__u8 type;
-@@ -79,7 +79,7 @@ struct igmpv3_query {
- 	__u8 qqic;
- 	__be16 nsrcs;
- 	__be32 srcs[0];
--};
-+} __attribute__((packed, aligned(2)));
- 
- #define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
- #define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
---- a/net/core/flow_dissector.c
-+++ b/net/core/flow_dissector.c
-@@ -128,7 +128,7 @@ __be32 __skb_flow_get_ports(const struct
- 		ports = __skb_header_pointer(skb, thoff + poff,
- 					     sizeof(_ports), data, hlen, &_ports);
- 		if (ports)
--			return *ports;
-+			return (__be32)net_hdr_word(ports);
- 	}
- 
- 	return 0;
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -78,7 +78,7 @@ struct icmp6hdr {
- #define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
- #define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
- #define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
--};
-+} __attribute__((packed, aligned(2)));
- 
- 
- #define ICMPV6_ROUTER_PREF_LOW		0x3
---- a/include/net/ndisc.h
-+++ b/include/net/ndisc.h
-@@ -93,7 +93,7 @@ struct ra_msg {
-         struct icmp6hdr		icmph;
- 	__be32			reachable_time;
- 	__be32			retrans_timer;
--};
-+} __attribute__((packed, aligned(2)));
- 
- struct rd_msg {
- 	struct icmp6hdr icmph;
-@@ -372,10 +372,10 @@ static inline u32 ndisc_hashfn(const voi
- {
- 	const u32 *p32 = pkey;
- 
--	return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
--		(p32[1] * hash_rnd[1]) +
--		(p32[2] * hash_rnd[2]) +
--		(p32[3] * hash_rnd[3]));
-+	return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
-+		(net_hdr_word(&p32[1]) * hash_rnd[1]) +
-+		(net_hdr_word(&p32[2]) * hash_rnd[2]) +
-+		(net_hdr_word(&p32[3]) * hash_rnd[3]));
- }
- 
- static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
---- a/net/sched/cls_u32.c
-+++ b/net/sched/cls_u32.c
-@@ -155,7 +155,7 @@ next_knode:
- 			data = skb_header_pointer(skb, toff, 4, &hdata);
- 			if (!data)
- 				goto out;
--			if ((*data ^ key->val) & key->mask) {
-+			if ((net_hdr_word(data) ^ key->val) & key->mask) {
- 				n = rcu_dereference_bh(n->next);
- 				goto next_knode;
- 			}
-@@ -206,8 +206,8 @@ check_terminal:
- 						  &hdata);
- 			if (!data)
- 				goto out;
--			sel = ht->divisor & u32_hash_fold(*data, &n->sel,
--							  n->fshift);
-+			sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
-+							  &n->sel, n->fshift);
- 		}
- 		if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
- 			goto next_ht;
---- a/net/ipv6/ip6_offload.c
-+++ b/net/ipv6/ip6_offload.c
-@@ -240,7 +240,7 @@ INDIRECT_CALLABLE_SCOPE struct sk_buff *
- 			continue;
- 
- 		iph2 = (struct ipv6hdr *)(p->data + off);
--		first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
-+		first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
- 
- 		/* All fields must match except length and Traffic Class.
- 		 * XXX skbs on the gro_list have all been parsed and pulled
---- a/include/net/addrconf.h
-+++ b/include/net/addrconf.h
-@@ -47,7 +47,7 @@ struct prefix_info {
- 	__be32			reserved2;
- 
- 	struct in6_addr		prefix;
--};
-+} __attribute__((packed, aligned(2)));
- 
- #include <linux/ipv6.h>
- #include <linux/netdevice.h>
---- a/include/net/inet_ecn.h
-+++ b/include/net/inet_ecn.h
-@@ -140,9 +140,9 @@ static inline int IP6_ECN_set_ce(struct
- 	if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
- 		return 0;
- 
--	from = *(__be32 *)iph;
-+	from = net_hdr_word(iph);
- 	to = from | htonl(INET_ECN_CE << 20);
--	*(__be32 *)iph = to;
-+	net_hdr_word(iph) = to;
- 	if (skb->ip_summed == CHECKSUM_COMPLETE)
- 		skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from),
- 				     (__force __wsum)to);
---- a/include/net/ipv6.h
-+++ b/include/net/ipv6.h
-@@ -146,7 +146,7 @@ struct frag_hdr {
- 	__u8	reserved;
- 	__be16	frag_off;
- 	__be32	identification;
--};
-+} __attribute__((packed, aligned(2)));
- 
- #define	IP6_MF		0x0001
- #define	IP6_OFFSET	0xFFF8
-@@ -560,8 +560,8 @@ static inline void __ipv6_addr_set_half(
- 	}
- #endif
- #endif
--	addr[0] = wh;
--	addr[1] = wl;
-+	net_hdr_word(&addr[0]) = wh;
-+	net_hdr_word(&addr[1]) = wl;
- }
- 
- static inline void ipv6_addr_set(struct in6_addr *addr,
-@@ -620,6 +620,8 @@ static inline bool ipv6_prefix_equal(con
- 	const __be32 *a1 = addr1->s6_addr32;
- 	const __be32 *a2 = addr2->s6_addr32;
- 	unsigned int pdw, pbi;
-+	/* Used for last <32-bit fraction of prefix */
-+	u32 pbia1, pbia2;
- 
- 	/* check complete u32 in prefix */
- 	pdw = prefixlen >> 5;
-@@ -628,7 +630,9 @@ static inline bool ipv6_prefix_equal(con
- 
- 	/* check incomplete u32 in prefix */
- 	pbi = prefixlen & 0x1f;
--	if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
-+	pbia1 = net_hdr_word(&a1[pdw]);
-+	pbia2 = net_hdr_word(&a2[pdw]);
-+	if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
- 		return false;
- 
- 	return true;
-@@ -749,13 +753,13 @@ static inline void ipv6_addr_set_v4mappe
-  */
- static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
- {
--	const __be32 *a1 = token1, *a2 = token2;
-+	const struct in6_addr *a1 = token1, *a2 = token2;
- 	int i;
- 
- 	addrlen >>= 2;
- 
- 	for (i = 0; i < addrlen; i++) {
--		__be32 xb = a1[i] ^ a2[i];
-+		__be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
- 		if (xb)
- 			return i * 32 + 31 - __fls(ntohl(xb));
- 	}
-@@ -941,17 +945,18 @@ static inline int ip6_multipath_hash_pol
- static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
- 				__be32 flowlabel)
- {
--	*(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
-+	net_hdr_word((__be32 *)hdr) =
-+		htonl(0x60000000 | (tclass << 20)) | flowlabel;
- }
- 
- static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
- {
--	return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
-+	return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
- }
- 
- static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr)
- {
--	return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK;
-+	return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK;
- }
- 
- static inline u8 ip6_tclass(__be32 flowinfo)
---- a/include/net/secure_seq.h
-+++ b/include/net/secure_seq.h
-@@ -3,6 +3,7 @@
- #define _NET_SECURE_SEQ
- 
- #include <linux/types.h>
-+#include <linux/in6.h>
- 
- u64 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
- u64 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -88,7 +88,7 @@ enum {
- /* Internet address. */
- struct in_addr {
- 	__be32	s_addr;
--};
-+} __attribute__((packed, aligned(2)));
- #endif
- 
- #define IP_TOS		1
---- a/net/ipv6/ip6_fib.c
-+++ b/net/ipv6/ip6_fib.c
-@@ -140,7 +140,7 @@ static __be32 addr_bit_set(const void *t
- 	 * See include/asm-generic/bitops/le.h.
- 	 */
- 	return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
--	       addr[fn_bit >> 5];
-+	       net_hdr_word(&addr[fn_bit >> 5]);
- }
- 
- struct fib6_info *fib6_info_alloc(gfp_t gfp_flags, bool with_fib6_nh)
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -412,7 +412,7 @@ static void tcp_sack(const struct sk_buf
- 
- 	/* Fast path for timestamp-only option */
- 	if (length == TCPOLEN_TSTAMP_ALIGNED
--	    && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
-+	    && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
- 				       | (TCPOPT_NOP << 16)
- 				       | (TCPOPT_TIMESTAMP << 8)
- 				       | TCPOLEN_TIMESTAMP))
---- a/net/xfrm/xfrm_input.c
-+++ b/net/xfrm/xfrm_input.c
-@@ -165,8 +165,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
- 	if (!pskb_may_pull(skb, hlen))
- 		return -EINVAL;
- 
--	*spi = *(__be32 *)(skb_transport_header(skb) + offset);
--	*seq = *(__be32 *)(skb_transport_header(skb) + offset_seq);
-+	*spi = net_hdr_word(skb_transport_header(skb) + offset);
-+	*seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
- 	return 0;
- }
- EXPORT_SYMBOL(xfrm_parse_spi);
---- a/net/ipv4/tcp_input.c
-+++ b/net/ipv4/tcp_input.c
-@@ -4128,14 +4128,16 @@ static bool tcp_parse_aligned_timestamp(
- {
- 	const __be32 *ptr = (const __be32 *)(th + 1);
- 
--	if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
--			  | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
-+	if (net_hdr_word(ptr) ==
-+	    htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+		  (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
- 		tp->rx_opt.saw_tstamp = 1;
- 		++ptr;
--		tp->rx_opt.rcv_tsval = ntohl(*ptr);
-+		tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
- 		++ptr;
--		if (*ptr)
--			tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
-+		if (net_hdr_word(ptr))
-+			tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
-+					       tp->tsoffset;
- 		else
- 			tp->rx_opt.rcv_tsecr = 0;
- 		return true;
---- a/include/uapi/linux/if_pppox.h
-+++ b/include/uapi/linux/if_pppox.h
-@@ -51,6 +51,7 @@ struct pppoe_addr {
-  */
- struct pptp_addr {
- 	__u16		call_id;
-+	__u16		pad;
- 	struct in_addr	sin_addr;
- };
- 
---- a/net/ipv6/netfilter/nf_log_ipv6.c
-+++ b/net/ipv6/netfilter/nf_log_ipv6.c
-@@ -63,9 +63,9 @@ static void dump_ipv6_packet(struct net
- 	/* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
- 	nf_log_buf_add(m, "LEN=%zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
- 	       ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
--	       (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
-+	       (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
- 	       ih->hop_limit,
--	       (ntohl(*(__be32 *)ih) & 0x000fffff));
-+	       (ntohl(net_hdr_word(ih)) & 0x000fffff));
- 
- 	fragment = 0;
- 	ptr = ip6hoff + sizeof(struct ipv6hdr);
---- a/include/net/neighbour.h
-+++ b/include/net/neighbour.h
-@@ -275,8 +275,10 @@ static inline bool neigh_key_eq128(const
- 	const u32 *n32 = (const u32 *)n->primary_key;
- 	const u32 *p32 = pkey;
- 
--	return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
--		(n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0;
-+	return ((n32[0] ^ net_hdr_word(&p32[0])) |
-+		(n32[1] ^ net_hdr_word(&p32[1])) |
-+		(n32[2] ^ net_hdr_word(&p32[2])) |
-+		(n32[3] ^ net_hdr_word(&p32[3]))) == 0;
- }
- 
- static inline struct neighbour *___neigh_lookup_noref(
---- a/include/uapi/linux/netfilter_arp/arp_tables.h
-+++ b/include/uapi/linux/netfilter_arp/arp_tables.h
-@@ -70,7 +70,7 @@ struct arpt_arp {
- 	__u8 flags;
- 	/* Inverse flags */
- 	__u16 invflags;
--};
-+} __attribute__((aligned(4)));
- 
- /* Values for "flag" field in struct arpt_ip (general arp structure).
-  * No flags defined yet.
---- a/net/core/utils.c
-+++ b/net/core/utils.c
-@@ -460,8 +460,14 @@ void inet_proto_csum_replace16(__sum16 *
- 			       bool pseudohdr)
- {
- 	__be32 diff[] = {
--		~from[0], ~from[1], ~from[2], ~from[3],
--		to[0], to[1], to[2], to[3],
-+		~net_hdr_word(&from[0]),
-+		~net_hdr_word(&from[1]),
-+		~net_hdr_word(&from[2]),
-+		~net_hdr_word(&from[3]),
-+		net_hdr_word(&to[0]),
-+		net_hdr_word(&to[1]),
-+		net_hdr_word(&to[2]),
-+		net_hdr_word(&to[3]),
- 	};
- 	if (skb->ip_summed != CHECKSUM_PARTIAL) {
- 		*sum = csum_fold(csum_partial(diff, sizeof(diff),
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -513,7 +513,7 @@ static inline bool is_etherdev_addr(cons
-  * @b: Pointer to Ethernet header
-  *
-  * Compare two Ethernet headers, returns 0 if equal.
-- * This assumes that the network header (i.e., IP header) is 4-byte
-+ * This assumes that the network header (i.e., IP header) is 2-byte
-  * aligned OR the platform can handle unaligned access.  This is the
-  * case for all packets coming into netif_receive_skb or similar
-  * entry points.
-@@ -536,11 +536,12 @@ static inline unsigned long compare_ethe
- 	fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6);
- 	return fold;
- #else
--	u32 *a32 = (u32 *)((u8 *)a + 2);
--	u32 *b32 = (u32 *)((u8 *)b + 2);
-+	const u16 *a16 = a;
-+	const u16 *b16 = b;
- 
--	return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
--	       (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
-+	return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) |
-+	       (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) |
-+	       (a16[6] ^ b16[6]);
- #endif
- }
- 
---- a/net/ipv4/tcp_offload.c
-+++ b/net/ipv4/tcp_offload.c
-@@ -223,7 +223,7 @@ struct sk_buff *tcp_gro_receive(struct l
- 
- 		th2 = tcp_hdr(p);
- 
--		if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
-+		if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) {
- 			NAPI_GRO_CB(p)->same_flow = 0;
- 			continue;
- 		}
-@@ -241,8 +241,8 @@ found:
- 		  ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
- 	flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
- 	for (i = sizeof(*th); i < thlen; i += 4)
--		flush |= *(u32 *)((u8 *)th + i) ^
--			 *(u32 *)((u8 *)th2 + i);
-+		flush |= net_hdr_word((u8 *)th + i) ^
-+			 net_hdr_word((u8 *)th2 + i);
- 
- 	/* When we receive our second frame we can made a decision on if we
- 	 * continue this flow as an atomic flow with a fixed ID or if we use
---- a/net/ipv6/netfilter/ip6table_mangle.c
-+++ b/net/ipv6/netfilter/ip6table_mangle.c
-@@ -47,7 +47,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- 	hop_limit = ipv6_hdr(skb)->hop_limit;
- 
- 	/* flowlabel and prio (includes version, which shouldn't change either */
--	flowlabel = *((u_int32_t *)ipv6_hdr(skb));
-+	flowlabel = net_hdr_word(ipv6_hdr(skb));
- 
- 	ret = ip6t_do_table(skb, state, state->net->ipv6.ip6table_mangle);
- 
-@@ -56,7 +56,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- 	     !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) ||
- 	     skb->mark != mark ||
- 	     ipv6_hdr(skb)->hop_limit != hop_limit ||
--	     flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) {
-+	     flowlabel != net_hdr_word(ipv6_hdr(skb)))) {
- 		err = ip6_route_me_harder(state->net, state->sk, skb);
- 		if (err < 0)
- 			ret = NF_DROP_ERR(err);
diff --git a/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch b/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch
deleted file mode 100644
index 5cd522cacb29..000000000000
--- a/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From: Christopher Hill <ch6574@gmail.com>
-Subject: [PATCH] ath79: add Mikrotik rb4xx series drivers
-
-This adds 3 Mikrotik rb4xx series drivers as follows:
-
-rb4xx-cpld: This is in the mfd subsystem, and is the parent CPLD device
-that interfaces between the SoC SPI bus and its two children below.
-rb4xx-gpio: This is the GPIO expander.
-rb4xx-nand: This is the NAND driver.
-
-The history of this code comes in three phases.
-
-1. The first is a May 2015 attempt to push the equivalient ar71xx rb4xx
-drivers upstream. See https://lore.kernel.org/patchwork/patch/940880/.
-
-Module-author: Gabor Juhos <juhosg@openwrt.org>
-Module-author: Imre Kaloz <kaloz@openwrt.org>
-Module-author: Bert Vermeulen <bert@biot.com>
-
-2. Next several ar71xx patches were applied bringing the code current.
-
-commit 7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c
-Submitted-by: Hauke Mehrtens <hauke@hauke-m.de>
-
-commit af79fdbe4af32a287798b579141204bda056b8aa
-commit 889272d92db689fd9c910243635e44c9d8323095
-commit e21cb649a235180563363b8af5ba8296b9ac0baa
-commit 7c09fa4a7492ca436f2c94bd9a465b7c5bbeed6f
-Submitted-by: Felix Fietkau <nbd@nbd.name>
-
-3. Finally a heavy refactor to split the driver into the three new
-subsystems, and updated to work with the device tree configuration, plus
-updates and review feedback incorporated
-
-Reviewed-by: Thibaut VARÈNE <hacks@slashdirt.org>
-Submitted-by: Christopher Hill <ch6574@gmail.com>
----
- drivers/mfd/Kconfig                           | 8 ++++++++
- drivers/mfd/Makefile                          | 1 +
- drivers/gpio/Kconfig                          | 6 ++++++
- drivers/gpio/Makefile                         | 1 +
- drivers/mtd/nand/raw/Kconfig                  | 7 +++++++
- drivers/mtd/nand/raw/Makefile                 | 1 +
- 6 files changed, 24 insertions(+)
-
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -2142,6 +2142,14 @@ config RAVE_SP_CORE
- 	  Select this to get support for the Supervisory Processor
- 	  device found on several devices in RAVE line of hardware.
- 
-+config MFD_RB4XX_CPLD
-+	tristate "CPLD driver for Mikrotik RB4xx series boards"
-+	select MFD_CORE
-+	depends on ATH79 || COMPILE_TEST
-+	help
-+	  Enables support for the CPLD chip (NAND & GPIO) on Mikrotik
-+	  Routerboard RB4xx series.
-+
- config SGI_MFD_IOC3
- 	tristate "SGI IOC3 core driver"
- 	depends on PCI && MIPS && 64BIT
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -264,6 +264,7 @@ obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-b
- obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o
- obj-$(CONFIG_MFD_KHADAS_MCU) 	+= khadas-mcu.o
- 
-+obj-$(CONFIG_MFD_RB4XX_CPLD)	+= rb4xx-cpld.o
- obj-$(CONFIG_SGI_MFD_IOC3)	+= ioc3.o
- obj-$(CONFIG_MFD_SIMPLE_MFD_I2C)	+= simple-mfd-i2c.o
- obj-$(CONFIG_MFD_INTEL_M10_BMC)   += intel-m10-bmc.o
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -1520,6 +1520,12 @@ config GPIO_SODAVILLE
- 	help
- 	  Say Y here to support Intel Sodaville GPIO.
- 
-+config GPIO_RB4XX
-+	tristate "GPIO expander for Mikrotik RB4xx series boards"
-+	depends on MFD_RB4XX_CPLD
-+	help
-+	  GPIO driver for Mikrotik Routerboard RB4xx series.
-+
- endmenu
- 
- menu "SPI GPIO expanders"
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -121,6 +121,7 @@ obj-$(CONFIG_GPIO_PL061)		+= gpio-pl061.
- obj-$(CONFIG_GPIO_PMIC_EIC_SPRD)	+= gpio-pmic-eic-sprd.o
- obj-$(CONFIG_GPIO_PXA)			+= gpio-pxa.o
- obj-$(CONFIG_GPIO_RASPBERRYPI_EXP)	+= gpio-raspberrypi-exp.o
-+obj-$(CONFIG_GPIO_RB4XX)		+= gpio-rb4xx.o
- obj-$(CONFIG_GPIO_RC5T583)		+= gpio-rc5t583.o
- obj-$(CONFIG_GPIO_RCAR)			+= gpio-rcar.o
- obj-$(CONFIG_GPIO_RDA)			+= gpio-rda.o
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -564,4 +564,11 @@ config MTD_NAND_AR934X
- 	  Enables support for NAND controller on Qualcomm Atheros SoCs.
- 	  This controller is found on AR934x and QCA955x SoCs.
- 
-+config MTD_NAND_RB4XX
-+	tristate "Support for NAND driver for Mikrotik RB4xx series boards"
-+	depends on MFD_RB4XX_CPLD
-+	help
-+	  Enables support for the NAND flash chip on Mikrotik Routerboard
-+	  RB4xx series.
-+
- endif # MTD_RAW_NAND
---- a/drivers/mtd/nand/raw/Makefile
-+++ b/drivers/mtd/nand/raw/Makefile
-@@ -59,6 +59,7 @@ obj-$(CONFIG_MTD_NAND_MESON)		+= meson_n
- obj-$(CONFIG_MTD_NAND_CADENCE)		+= cadence-nand-controller.o
- obj-$(CONFIG_MTD_NAND_ARASAN)		+= arasan-nand-controller.o
- obj-$(CONFIG_MTD_NAND_AR934X)		+= ar934x_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX)		+= nand_rb4xx.o
- 
- nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
- nand-objs += nand_onfi.o
diff --git a/target/linux/ath79/patches-5.10/930-ar8216-make-reg-access-atomic.patch b/target/linux/ath79/patches-5.10/930-ar8216-make-reg-access-atomic.patch
deleted file mode 100644
index 02f763534e43..000000000000
--- a/target/linux/ath79/patches-5.10/930-ar8216-make-reg-access-atomic.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From b3797d1a92afe97c173b00fdb7824cedba24eef0 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Sun, 20 Sep 2020 01:00:45 +0800
-Subject: [PATCH] ath79: ar8216: make switch register access atomic
-
-due to some unknown reason these register accesses sometimes fail
-on the integrated switch without this patch.
-
-THIS ONLY WORKS ON ATH79 AND MAY BREAK THE DRIVER ON OTHER PLATFORMS!
-The mdio bus on ath79 works in polling mode and doesn't rely on
-any interrupt. This patch breaks the driver on any mdio master
-with interrupts used.
-
----
---- a/drivers/net/phy/ar8216.c
-+++ b/drivers/net/phy/ar8216.c
-@@ -252,6 +252,7 @@ ar8xxx_mii_write32(struct ar8xxx_priv *p
- u32
- ar8xxx_read(struct ar8xxx_priv *priv, int reg)
- {
-+	unsigned long flags;
- 	struct mii_bus *bus = priv->mii_bus;
- 	u16 r1, r2, page;
- 	u32 val;
-@@ -259,11 +260,13 @@ ar8xxx_read(struct ar8xxx_priv *priv, in
- 	split_addr((u32) reg, &r1, &r2, &page);
- 
- 	mutex_lock(&bus->mdio_lock);
-+	local_irq_save(flags);
- 
- 	bus->write(bus, 0x18, 0, page);
- 	wait_for_page_switch();
- 	val = ar8xxx_mii_read32(priv, 0x10 | r2, r1);
- 
-+	local_irq_restore(flags);
- 	mutex_unlock(&bus->mdio_lock);
- 
- 	return val;
-@@ -272,17 +275,20 @@ ar8xxx_read(struct ar8xxx_priv *priv, in
- void
- ar8xxx_write(struct ar8xxx_priv *priv, int reg, u32 val)
- {
-+	unsigned long flags;
- 	struct mii_bus *bus = priv->mii_bus;
- 	u16 r1, r2, page;
- 
- 	split_addr((u32) reg, &r1, &r2, &page);
- 
- 	mutex_lock(&bus->mdio_lock);
-+	local_irq_save(flags);
- 
- 	bus->write(bus, 0x18, 0, page);
- 	wait_for_page_switch();
- 	ar8xxx_mii_write32(priv, 0x10 | r2, r1, val);
- 
-+	local_irq_restore(flags);
- 	mutex_unlock(&bus->mdio_lock);
- }
- 
diff --git a/target/linux/ath79/patches-5.10/939-mikrotik-rb91x.patch b/target/linux/ath79/patches-5.10/939-mikrotik-rb91x.patch
deleted file mode 100644
index 7990061cbdb8..000000000000
--- a/target/linux/ath79/patches-5.10/939-mikrotik-rb91x.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From: Denis Kalashnikov <denis281089@gmail.com>
-Subject: [PATCH] ath79: add support for reset key on MikroTik RB912UAG-2HPnD
-
-On MikroTik RB91x board series a reset key shares SoC gpio
-line #15 with NAND ALE and NAND IO7. So we need a custom
-gpio driver to manage this non-trivial connection schema.
-Also rb91x-nand needs to have an ability to disable a polling
-of the key while it works with NAND.
-
-While we've been integrating rb91x-key into a firmware, we've
-figured out that:
-* In the gpio-latch driver we need to add a "cansleep" suffix to
-several gpiolib calls,
-* When gpio-latch and rb91x-nand fail to get a gpio and an error
-is -EPROBE_DEFER, they shouldn't report about this, since this
-actually is not an error and occurs when the gpio-latch probe
-function is called before the rb91x-key probe.
-We fix these related things here too.
-
-Submitted-by: Denis Kalashnikov <denis281089@gmail.com>
-Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
-Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
----
- drivers/gpio/Kconfig                          | 11 +++++++++++
- drivers/gpio/Makefile                         |  2 ++
- drivers/mtd/nand/raw/Kconfig                  |  6 ++++++
- drivers/mtd/nand/raw/Makefile                 |  1 +
- 7 files changed, 20 insertions(+)
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -341,6 +341,13 @@ config GPIO_IXP4XX
- 	  IXP4xx series of chips.
- 
- 	  If unsure, say N.
-+
-+config GPIO_LATCH
-+	tristate "MikroTik RouterBOARD GPIO latch support"
-+	depends on ATH79
-+	help
-+	  GPIO driver for latch on some MikroTik RouterBOARDs.
-+
- config GPIO_LOGICVC
- 	tristate "Xylon LogiCVC GPIO support"
- 	depends on MFD_SYSCON && OF
-@@ -495,6 +502,10 @@ config GPIO_REG
- 	  A 32-bit single register GPIO fixed in/out implementation.  This
- 	  can be used to represent any register as a set of GPIO signals.
- 
-+config GPIO_RB91X_KEY
-+	tristate "MikroTik RB91x board series reset key support"
-+	depends on ATH79
-+
- config GPIO_SAMA5D2_PIOBU
- 	tristate "SAMA5D2 PIOBU GPIO support"
- 	depends on MFD_SYSCON
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -73,6 +73,7 @@ obj-$(CONFIG_GPIO_IT87)			+= gpio-it87.o
- obj-$(CONFIG_GPIO_IXP4XX)		+= gpio-ixp4xx.o
- obj-$(CONFIG_GPIO_JANZ_TTL)		+= gpio-janz-ttl.o
- obj-$(CONFIG_GPIO_KEMPLD)		+= gpio-kempld.o
-+obj-$(CONFIG_GPIO_LATCH)		+= gpio-latch.o
- obj-$(CONFIG_GPIO_LOGICVC)		+= gpio-logicvc.o
- obj-$(CONFIG_GPIO_LOONGSON1)		+= gpio-loongson1.o
- obj-$(CONFIG_GPIO_LOONGSON)		+= gpio-loongson.o
-@@ -122,6 +123,7 @@ obj-$(CONFIG_GPIO_PMIC_EIC_SPRD)	+= gpio
- obj-$(CONFIG_GPIO_PXA)			+= gpio-pxa.o
- obj-$(CONFIG_GPIO_RASPBERRYPI_EXP)	+= gpio-raspberrypi-exp.o
- obj-$(CONFIG_GPIO_RB4XX)		+= gpio-rb4xx.o
-+obj-$(CONFIG_GPIO_RB91X_KEY)		+= gpio-rb91x-key.o
- obj-$(CONFIG_GPIO_RC5T583)		+= gpio-rc5t583.o
- obj-$(CONFIG_GPIO_RCAR)			+= gpio-rcar.o
- obj-$(CONFIG_GPIO_RDA)			+= gpio-rda.o
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -571,4 +571,10 @@ config MTD_NAND_RB4XX
- 	  Enables support for the NAND flash chip on Mikrotik Routerboard
- 	  RB4xx series.
- 
-+config MTD_NAND_RB91X
-+	tristate "MikroTik RB91x NAND driver support"
-+	depends on ATH79 && MTD_RAW_NAND
-+	help
-+	  Enables support for the NAND flash chip on MikroTik RB91x series.
-+
- endif # MTD_RAW_NAND
---- a/drivers/mtd/nand/raw/Makefile
-+++ b/drivers/mtd/nand/raw/Makefile
-@@ -60,6 +60,7 @@ obj-$(CONFIG_MTD_NAND_CADENCE)		+= caden
- obj-$(CONFIG_MTD_NAND_ARASAN)		+= arasan-nand-controller.o
- obj-$(CONFIG_MTD_NAND_AR934X)		+= ar934x_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX)		+= nand_rb4xx.o
-+obj-$(CONFIG_MTD_NAND_RB91X)		+= rb91x_nand.o
- 
- nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
- nand-objs += nand_onfi.o
diff --git a/target/linux/ath79/patches-5.10/940-ath79-add-support-for-booting-QCN550x.patch b/target/linux/ath79/patches-5.10/940-ath79-add-support-for-booting-QCN550x.patch
deleted file mode 100644
index cf7743363434..000000000000
--- a/target/linux/ath79/patches-5.10/940-ath79-add-support-for-booting-QCN550x.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From: Wenli Looi <wlooi@ucalgary.ca>
-Date: Sun, 20 Jun 2021 23:32:28 -0700
-Subject: [PATCH] ath79: add support for booting QCN550x
-
-Based on wikidevi, QCN550x is a "Dragonfly" like QCA9561 and QCA9563.
-Treating it as QCA956x seems to work.
-Tested on Netgear EX7300v2 which boots successfully with
-the same CPU clock as the stock firmware.
-
-Link: https://wikidevi.wi-cat.ru/Qualcomm#bgn
-Link: https://wikidevi.wi-cat.ru/Qualcomm_Atheros#.28a.29bgn_2
-Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
-
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -121,6 +121,7 @@ static void prom_putchar_init(void)
- 	case REV_ID_MAJOR_QCA9558:
- 	case REV_ID_MAJOR_TP9343:
- 	case REV_ID_MAJOR_QCA956X:
-+	case REV_ID_MAJOR_QCN550X:
- 		_prom_putchar = prom_putchar_ar71xx;
- 		break;
- 
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -168,6 +168,12 @@ static void __init ath79_detect_sys_type
- 		rev = id & QCA956X_REV_ID_REVISION_MASK;
- 		break;
- 
-+	case REV_ID_MAJOR_QCN550X:
-+		ath79_soc = ATH79_SOC_QCA956X;
-+		chip = "550X";
-+		rev = id & QCA956X_REV_ID_REVISION_MASK;
-+		break;
-+
- 	case REV_ID_MAJOR_TP9343:
- 		ath79_soc = ATH79_SOC_TP9343;
- 		chip = "9343";
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -867,6 +867,7 @@
- #define REV_ID_MAJOR_QCA9558		0x1130
- #define REV_ID_MAJOR_TP9343		0x0150
- #define REV_ID_MAJOR_QCA956X		0x1150
-+#define REV_ID_MAJOR_QCN550X		0x2170
- 
- #define AR71XX_REV_ID_MINOR_MASK	0x3
- #define AR71XX_REV_ID_MINOR_AR7130	0x0
diff --git a/target/linux/bcm47xx/config-5.10 b/target/linux/bcm47xx/config-5.10
deleted file mode 100644
index bee300d9c021..000000000000
--- a/target/linux/bcm47xx/config-5.10
+++ /dev/null
@@ -1,213 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BCM47XX=y
-CONFIG_BCM47XX_BCMA=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_SSB=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_MIPS=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_NFLASH=y
-CONFIG_BCMA_PFLASH=y
-CONFIG_BCMA_SFLASH=y
-# CONFIG_BGMAC_BCMA is not set
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_COMMON_CLK is not set
-CONFIG_COMPAT_32BIT_TIME=y
-# CONFIG_CPU_BMIPS is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_DIRECT_OPS=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
-CONFIG_DMA_NONCOHERENT_MMAP=y
-CONFIG_DMA_NONCOHERENT_OPS=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_WDT=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_COMPILER_H=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO_REGISTER=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_BCM47XXNFLASH=y
-CONFIG_MTD_NAND_BRCMNAND=y
-CONFIG_MTD_NAND_BRCMNAND_BCMA=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_PARSER_TRX=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_OF is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_DRIVER_EXTIF=y
-CONFIG_SSB_DRIVER_GIGE=y
-CONFIG_SSB_DRIVER_GPIO=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_HOST_SOC=y
-CONFIG_SSB_PCICORE_HOSTMODE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_SFLASH=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_BMIPS=y
-CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
-CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/bcm47xx/patches-5.10/030-v5.17-0001-MIPS-BCM47XX-Define-Linksys-WRT310N-V2-buttons.patch b/target/linux/bcm47xx/patches-5.10/030-v5.17-0001-MIPS-BCM47XX-Define-Linksys-WRT310N-V2-buttons.patch
deleted file mode 100644
index 921825be5caa..000000000000
--- a/target/linux/bcm47xx/patches-5.10/030-v5.17-0001-MIPS-BCM47XX-Define-Linksys-WRT310N-V2-buttons.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From eea175eedf3e2f71b9538d21e643e7a1be4923df Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Thu, 6 Jan 2022 19:51:37 -0800
-Subject: [PATCH] MIPS: BCM47XX: Define Linksys WRT310N V2 buttons
-
-Update the buttons registration code to register the two buttons (WPS,
-system rester) using the existing BCM47XX_BOARD_LINKSYS_WRT310NV2 board
-entry.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/bcm47xx/buttons.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -277,6 +277,12 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in
- };
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = {
-+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
- 	BCM47XX_GPIO_KEY(5, KEY_WIMAX),
- 	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-@@ -608,6 +614,9 @@ int __init bcm47xx_buttons_register(void
- 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
- 		break;
-+	case BCM47XX_BOARD_LINKSYS_WRT310NV2:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2);
-+		break;
- 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
- 		break;
diff --git a/target/linux/bcm47xx/patches-5.10/030-v5.17-0002-MIPS-BCM47XX-Add-board-entry-for-Linksys-WRT320N-v1.patch b/target/linux/bcm47xx/patches-5.10/030-v5.17-0002-MIPS-BCM47XX-Add-board-entry-for-Linksys-WRT320N-v1.patch
deleted file mode 100644
index 3fb013a58577..000000000000
--- a/target/linux/bcm47xx/patches-5.10/030-v5.17-0002-MIPS-BCM47XX-Add-board-entry-for-Linksys-WRT320N-v1.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From 3829e4f10a232964cc728c0479c8097922e5e073 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Thu, 6 Jan 2022 19:51:38 -0800
-Subject: [PATCH] MIPS: BCM47XX: Add board entry for Linksys WRT320N v1
-
-This router is based on a Broadcom BCM4717A1 chipset and supports
-802.11n Wi-Fi. Add a board entry for that router and register LEDs and
-buttons accordingly.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/bcm47xx/board.c                          |  1 +
- arch/mips/bcm47xx/buttons.c                        |  9 +++++++++
- arch/mips/bcm47xx/leds.c                           | 10 ++++++++++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h |  1 +
- 4 files changed, 21 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -141,6 +141,7 @@ struct bcm47xx_board_type_list2 bcm47xx_
- 	{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
-+	{{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -283,6 +283,12 @@ bcm47xx_buttons_linksys_wrt310n_v2[] __i
- };
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = {
-+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(8, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
- 	BCM47XX_GPIO_KEY(5, KEY_WIMAX),
- 	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-@@ -617,6 +623,9 @@ int __init bcm47xx_buttons_register(void
- 	case BCM47XX_BOARD_LINKSYS_WRT310NV2:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2);
- 		break;
-+	case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1);
-+		break;
- 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
- 		break;
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -314,6 +314,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
- };
- 
- static const struct gpio_led
-+bcm47xx_leds_linksys_wrt320n_v1[] __initconst = {
-+	BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+	BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
- 	BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
- 	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-@@ -689,6 +696,9 @@ void __init bcm47xx_leds_register(void)
- 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
- 		break;
-+	case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
-+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1);
-+		break;
- 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
- 		break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -72,6 +72,7 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_LINKSYS_WRT300NV11,
- 	BCM47XX_BOARD_LINKSYS_WRT310NV1,
- 	BCM47XX_BOARD_LINKSYS_WRT310NV2,
-+	BCM47XX_BOARD_LINKSYS_WRT320N_V1,
- 	BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
- 	BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
- 	BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
diff --git a/target/linux/bcm47xx/patches-5.10/030-v5.17-0003-MIPS-BCM47XX-Add-LEDs-and-buttons-for-Asus-RTN-10U.patch b/target/linux/bcm47xx/patches-5.10/030-v5.17-0003-MIPS-BCM47XX-Add-LEDs-and-buttons-for-Asus-RTN-10U.patch
deleted file mode 100644
index c09140e99d02..000000000000
--- a/target/linux/bcm47xx/patches-5.10/030-v5.17-0003-MIPS-BCM47XX-Add-LEDs-and-buttons-for-Asus-RTN-10U.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From aecf89f2f8e8a604c33085c230a1f04ea325de64 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Thu, 6 Jan 2022 19:51:39 -0800
-Subject: [PATCH] MIPS: BCM47XX: Add LEDs and buttons for Asus RTN-10U
-
-Add the definitions for the buttons and LEDs used on the Asus RTN-10U
-router.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/bcm47xx/buttons.c |  9 +++++++++
- arch/mips/bcm47xx/leds.c    | 11 +++++++++++
- 2 files changed, 20 insertions(+)
-
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -27,6 +27,12 @@
- /* Asus */
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_asus_rtn10u[] __initconst = {
-+	BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(21, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_asus_rtn12[] __initconst = {
- 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
- 	BCM47XX_GPIO_KEY(1, KEY_RESTART),
-@@ -490,6 +496,9 @@ int __init bcm47xx_buttons_register(void
- 	int err;
- 
- 	switch (board) {
-+	case BCM47XX_BOARD_ASUS_RTN10U:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u);
-+		break;
- 	case BCM47XX_BOARD_ASUS_RTN12:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
- 		break;
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -30,6 +30,14 @@
- /* Asus */
- 
- static const struct gpio_led
-+bcm47xx_leds_asus_rtn10u[] __initconst = {
-+	BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+	BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_asus_rtn12[] __initconst = {
- 	BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
- 	BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-@@ -563,6 +571,9 @@ void __init bcm47xx_leds_register(void)
- 	enum bcm47xx_board board = bcm47xx_board_get();
- 
- 	switch (board) {
-+	case BCM47XX_BOARD_ASUS_RTN10U:
-+		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u);
-+		break;
- 	case BCM47XX_BOARD_ASUS_RTN12:
- 		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
- 		break;
diff --git a/target/linux/bcm47xx/patches-5.10/030-v5.17-0004-MIPS-BCM47XX-Add-support-for-Netgear-R6300-v1.patch b/target/linux/bcm47xx/patches-5.10/030-v5.17-0004-MIPS-BCM47XX-Add-support-for-Netgear-R6300-v1.patch
deleted file mode 100644
index 8740942d6f15..000000000000
--- a/target/linux/bcm47xx/patches-5.10/030-v5.17-0004-MIPS-BCM47XX-Add-support-for-Netgear-R6300-v1.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 15e690af5cc3cd8f5d14ee2aa3a093f80196110e Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Thu, 6 Jan 2022 19:51:40 -0800
-Subject: [PATCH] MIPS: BCM47XX: Add support for Netgear R6300 v1
-
-Add support for the Netgear R6300 v1 Wi-Fi router using a Broadcom
-BCM4706 chipset and supporting 802.11n and 802.11ac.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/bcm47xx/board.c                          | 1 +
- arch/mips/bcm47xx/buttons.c                        | 8 ++++++++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -162,6 +162,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
- 	{{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
- 	{{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
- 	{{BCM47XX_BOARD_NETGEAR_R6200_V1, "Netgear R6200 V1"}, "U12H192T00_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -410,6 +410,11 @@ bcm47xx_buttons_netgear_r6200_v1[] __ini
- };
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_r6300_v1[] __initconst = {
-+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
- 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
- 	BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-@@ -701,6 +706,9 @@ int __init bcm47xx_buttons_register(void
- 	case BCM47XX_BOARD_NETGEAR_R6200_V1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6200_v1);
- 		break;
-+	case BCM47XX_BOARD_NETGEAR_R6300_V1:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1);
-+		break;
- 	case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
- 		break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -100,6 +100,7 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
- 
- 	BCM47XX_BOARD_NETGEAR_R6200_V1,
-+	BCM47XX_BOARD_NETGEAR_R6300_V1,
- 	BCM47XX_BOARD_NETGEAR_WGR614V8,
- 	BCM47XX_BOARD_NETGEAR_WGR614V9,
- 	BCM47XX_BOARD_NETGEAR_WGR614_V10,
diff --git a/target/linux/bcm47xx/patches-5.10/030-v5.17-0005-MIPS-BCM47XX-Add-support-for-Netgear-WN2500RP-v1-v2.patch b/target/linux/bcm47xx/patches-5.10/030-v5.17-0005-MIPS-BCM47XX-Add-support-for-Netgear-WN2500RP-v1-v2.patch
deleted file mode 100644
index 6975bce95232..000000000000
--- a/target/linux/bcm47xx/patches-5.10/030-v5.17-0005-MIPS-BCM47XX-Add-support-for-Netgear-WN2500RP-v1-v2.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 4da27b6d550427a0560a15df36de99cb17629216 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Thu, 6 Jan 2022 19:51:41 -0800
-Subject: [PATCH] MIPS: BCM47XX: Add support for Netgear WN2500RP v1 & v2
-
-Add support for the Netgear WN2500 RP v1 and v2 Wi-Fi range extenders
-based on the BCM5357 chipset and supporting 802.11n and 802.11ac.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/bcm47xx/board.c                          | 2 ++
- arch/mips/bcm47xx/buttons.c                        | 9 +++++++++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 2 ++
- 3 files changed, 13 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -166,6 +166,8 @@ struct bcm47xx_board_type_list1 bcm47xx_
- 	{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -415,6 +415,12 @@ bcm47xx_buttons_netgear_r6300_v1[] __ini
- };
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = {
-+	BCM47XX_GPIO_KEY(12, KEY_RESTART),
-+	BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
- 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
- 	BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-@@ -709,6 +715,9 @@ int __init bcm47xx_buttons_register(void
- 	case BCM47XX_BOARD_NETGEAR_R6300_V1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1);
- 		break;
-+	case BCM47XX_BOARD_NETGEAR_WN2500RP_V1:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1);
-+		break;
- 	case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
- 		break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -104,6 +104,8 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_NETGEAR_WGR614V8,
- 	BCM47XX_BOARD_NETGEAR_WGR614V9,
- 	BCM47XX_BOARD_NETGEAR_WGR614_V10,
-+	BCM47XX_BOARD_NETGEAR_WN2500RP_V1,
-+	BCM47XX_BOARD_NETGEAR_WN2500RP_V2,
- 	BCM47XX_BOARD_NETGEAR_WNDR3300,
- 	BCM47XX_BOARD_NETGEAR_WNDR3400V1,
- 	BCM47XX_BOARD_NETGEAR_WNDR3400V2,
diff --git a/target/linux/bcm47xx/patches-5.10/031-v6.0-MIPS-BCM47XX-Add-support-for-Netgear-WNR3500L-v2.patch b/target/linux/bcm47xx/patches-5.10/031-v6.0-MIPS-BCM47XX-Add-support-for-Netgear-WNR3500L-v2.patch
deleted file mode 100644
index 8c2233c804af..000000000000
--- a/target/linux/bcm47xx/patches-5.10/031-v6.0-MIPS-BCM47XX-Add-support-for-Netgear-WNR3500L-v2.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From c022e87162219d67d687df22c977d1c2fc95fb42 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Thu, 14 Jul 2022 14:13:01 -0700
-Subject: [PATCH] MIPS: BCM47XX: Add support for Netgear WNR3500L v2
-
-Add support for the Netgear WNR3500L v2 router based on the BCM47186
-chipset and supporting 802.11n Wi-Fi.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/bcm47xx/board.c                          |  2 ++
- arch/mips/bcm47xx/buttons.c                        | 10 ++++++++++
- arch/mips/bcm47xx/leds.c                           | 11 +++++++++++
- arch/mips/bcm47xx/workarounds.c                    |  1 +
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h |  1 +
- 5 files changed, 25 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -181,6 +181,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
- 	{{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T50_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_WNR3500L_V2, "Netgear WNR3500L V2"}, "U12H172T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR"},
-@@ -195,6 +196,7 @@ struct bcm47xx_board_type_list3 bcm47xx_
- 	{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
- 	{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
- 	{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
-+	{{BCM47XX_BOARD_NETGEAR_WNR3500L_V2, "Netgear WNR3500L V2"}, "0x052b", "3500L", "02"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -460,6 +460,13 @@ bcm47xx_buttons_netgear_wnr3500lv1[] __i
- };
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wnr3500lv2[] __initconst = {
-+	BCM47XX_GPIO_KEY(4, KEY_RESTART),
-+	BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(8, KEY_RFKILL),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wnr834bv2[] __initconst = {
- 	BCM47XX_GPIO_KEY(6, KEY_RESTART),
- };
-@@ -736,6 +743,9 @@ int __init bcm47xx_buttons_register(void
- 	case BCM47XX_BOARD_NETGEAR_WNR3500L:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr3500lv1);
- 		break;
-+	case BCM47XX_BOARD_NETGEAR_WNR3500L_V2:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr3500lv2);
-+		break;
- 	case BCM47XX_BOARD_NETGEAR_WNR834BV2:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2);
- 		break;
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -528,6 +528,14 @@ bcm47xx_leds_netgear_wnr3500lv1[] __init
- };
- 
- static const struct gpio_led
-+bcm47xx_leds_netgear_wnr3500lv2[] __initconst = {
-+	BCM47XX_GPIO_LED(0, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(1, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(3, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+	BCM47XX_GPIO_LED(7, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_netgear_wnr834bv2[] __initconst = {
- 	BCM47XX_GPIO_LED(2, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
- 	BCM47XX_GPIO_LED(3, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
-@@ -791,6 +799,9 @@ void __init bcm47xx_leds_register(void)
- 	case BCM47XX_BOARD_NETGEAR_WNR3500L:
- 		bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr3500lv1);
- 		break;
-+	case BCM47XX_BOARD_NETGEAR_WNR3500L_V2:
-+		bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr3500lv2);
-+		break;
- 	case BCM47XX_BOARD_NETGEAR_WNR834BV2:
- 		bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
- 		break;
---- a/arch/mips/bcm47xx/workarounds.c
-+++ b/arch/mips/bcm47xx/workarounds.c
-@@ -22,6 +22,7 @@ void __init bcm47xx_workarounds(void)
- 
- 	switch (board) {
- 	case BCM47XX_BOARD_NETGEAR_WNR3500L:
-+	case BCM47XX_BOARD_NETGEAR_WNR3500L_V2:
- 		bcm47xx_workarounds_enable_usb_power(12);
- 		break;
- 	case BCM47XX_BOARD_NETGEAR_WNDR3400V2:
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -118,6 +118,7 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_NETGEAR_WNR1000_V3,
- 	BCM47XX_BOARD_NETGEAR_WNR2000,
- 	BCM47XX_BOARD_NETGEAR_WNR3500L,
-+	BCM47XX_BOARD_NETGEAR_WNR3500L_V2,
- 	BCM47XX_BOARD_NETGEAR_WNR3500U,
- 	BCM47XX_BOARD_NETGEAR_WNR3500V2,
- 	BCM47XX_BOARD_NETGEAR_WNR3500V2VC,
diff --git a/target/linux/bcm47xx/patches-5.10/032-v6.3-MIPS-BCM47XX-Add-support-for-Linksys-E2500-V3.patch b/target/linux/bcm47xx/patches-5.10/032-v6.3-MIPS-BCM47XX-Add-support-for-Linksys-E2500-V3.patch
deleted file mode 100644
index 4faecdc7d567..000000000000
--- a/target/linux/bcm47xx/patches-5.10/032-v6.3-MIPS-BCM47XX-Add-support-for-Linksys-E2500-V3.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From fc605b914167de75432c3b5aae239fb191e84a31 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 8 Feb 2023 08:03:01 +0100
-Subject: [PATCH] MIPS: BCM47XX: Add support for Linksys E2500 V3
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a BCM5358 based home WiFi router. 16 MiB flash, 64 MiB RAM, BCM5325
-switch, on-SoC 802.11n radio.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/bcm47xx/board.c                          | 1 +
- arch/mips/bcm47xx/buttons.c                        | 9 +++++++++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 1 +
- 3 files changed, 11 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -130,6 +130,7 @@ struct bcm47xx_board_type_list2 bcm47xx_
- 	{{BCM47XX_BOARD_LINKSYS_E1000V21, "Linksys E1000 V2.1"}, "E1000", "2.1"},
- 	{{BCM47XX_BOARD_LINKSYS_E1200V2, "Linksys E1200 V2"}, "E1200", "2.0"},
- 	{{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"},
-+	{{BCM47XX_BOARD_LINKSYS_E2500V3, "Linksys E2500 V3"}, "E2500", "1.0"},
- 	/* like WRT610N v2.0 */
- 	{{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -223,6 +223,12 @@ bcm47xx_buttons_linksys_e2000v1[] __init
- };
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_e2500v3[] __initconst = {
-+	BCM47XX_GPIO_KEY(9, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(10, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_linksys_e3000v1[] __initconst = {
- 	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
- 	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-@@ -617,6 +623,9 @@ int __init bcm47xx_buttons_register(void
- 	case BCM47XX_BOARD_LINKSYS_E2000V1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e2000v1);
- 		break;
-+	case BCM47XX_BOARD_LINKSYS_E2500V3:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e2500v3);
-+		break;
- 	case BCM47XX_BOARD_LINKSYS_E3000V1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3000v1);
- 		break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -61,6 +61,7 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_LINKSYS_E1000V21,
- 	BCM47XX_BOARD_LINKSYS_E1200V2,
- 	BCM47XX_BOARD_LINKSYS_E2000V1,
-+	BCM47XX_BOARD_LINKSYS_E2500V3,
- 	BCM47XX_BOARD_LINKSYS_E3000V1,
- 	BCM47XX_BOARD_LINKSYS_E3200V1,
- 	BCM47XX_BOARD_LINKSYS_E4200V1,
diff --git a/target/linux/bcm47xx/patches-5.10/100-v5.18-mtd-rawnand-brcmnand-Assign-soc-as-early-as-possible.patch b/target/linux/bcm47xx/patches-5.10/100-v5.18-mtd-rawnand-brcmnand-Assign-soc-as-early-as-possible.patch
deleted file mode 100644
index 8efda1080957..000000000000
--- a/target/linux/bcm47xx/patches-5.10/100-v5.18-mtd-rawnand-brcmnand-Assign-soc-as-early-as-possible.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: [PATCH v3 1/9] mtd: rawnand: brcmnand: Assign soc as early as possible
-Date: Fri, 07 Jan 2022 10:46:06 -0800
-Content-Type: text/plain; charset="utf-8"
-
-In order to key off the brcmnand_probe() code in subsequent changes
-depending upon ctrl->soc, assign that variable as early as possible,
-instead of much later when we have checked that it is non-NULL.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -2949,6 +2949,7 @@ int brcmnand_probe(struct platform_devic
- 
- 	dev_set_drvdata(dev, ctrl);
- 	ctrl->dev = dev;
-+	ctrl->soc = soc;
- 
- 	init_completion(&ctrl->done);
- 	init_completion(&ctrl->dma_done);
-@@ -3089,8 +3090,6 @@ int brcmnand_probe(struct platform_devic
- 	 * interesting ways
- 	 */
- 	if (soc) {
--		ctrl->soc = soc;
--
- 		ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
- 				       DRV_NAME, ctrl);
- 
diff --git a/target/linux/bcm47xx/patches-5.10/101-v5.18-mtd-rawnand-brcmnand-Allow-SoC-to-provide-I-O-operations.patch b/target/linux/bcm47xx/patches-5.10/101-v5.18-mtd-rawnand-brcmnand-Allow-SoC-to-provide-I-O-operations.patch
deleted file mode 100644
index 23f5df301586..000000000000
--- a/target/linux/bcm47xx/patches-5.10/101-v5.18-mtd-rawnand-brcmnand-Allow-SoC-to-provide-I-O-operations.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: [PATCH v3 2/9] mtd: rawnand: brcmnand: Allow SoC to provide I/O operations
-Date: Fri, 07 Jan 2022 10:46:07 -0800
-Content-Type: text/plain; charset="utf-8"
-
-Allow a brcmnand_soc instance to provide a custom set of I/O operations
-which we will require when using this driver on a BCMA bus which is not
-directly memory mapped I/O. Update the nand_{read,write}_reg accordingly
-to use the SoC operations if provided.
-
-To minimize the penalty on other SoCs which do support standard MMIO
-accesses, we use a static key which is disabled by default and gets
-enabled if a soc implementation does provide I/O operations.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 28 +++++++++++++++++++++--
- drivers/mtd/nand/raw/brcmnand/brcmnand.h | 29 ++++++++++++++++++++++++
- 2 files changed, 55 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -25,6 +25,7 @@
- #include <linux/of.h>
- #include <linux/of_platform.h>
- #include <linux/slab.h>
-+#include <linux/static_key.h>
- #include <linux/list.h>
- #include <linux/log2.h>
- 
-@@ -207,6 +208,8 @@ enum {
- 
- struct brcmnand_host;
- 
-+static DEFINE_STATIC_KEY_FALSE(brcmnand_soc_has_ops_key);
-+
- struct brcmnand_controller {
- 	struct device		*dev;
- 	struct nand_controller	controller;
-@@ -589,15 +592,25 @@ enum {
- 	INTFC_CTLR_READY		= BIT(31),
- };
- 
-+static inline bool brcmnand_non_mmio_ops(struct brcmnand_controller *ctrl)
-+{
-+	return static_branch_unlikely(&brcmnand_soc_has_ops_key);
-+}
-+
- static inline u32 nand_readreg(struct brcmnand_controller *ctrl, u32 offs)
- {
-+	if (brcmnand_non_mmio_ops(ctrl))
-+		return brcmnand_soc_read(ctrl->soc, offs);
- 	return brcmnand_readl(ctrl->nand_base + offs);
- }
- 
- static inline void nand_writereg(struct brcmnand_controller *ctrl, u32 offs,
- 				 u32 val)
- {
--	brcmnand_writel(val, ctrl->nand_base + offs);
-+	if (brcmnand_non_mmio_ops(ctrl))
-+		brcmnand_soc_write(ctrl->soc, val, offs);
-+	else
-+		brcmnand_writel(val, ctrl->nand_base + offs);
- }
- 
- static int brcmnand_revision_init(struct brcmnand_controller *ctrl)
-@@ -763,13 +776,18 @@ static inline void brcmnand_rmw_reg(stru
- 
- static inline u32 brcmnand_read_fc(struct brcmnand_controller *ctrl, int word)
- {
-+	if (brcmnand_non_mmio_ops(ctrl))
-+		return brcmnand_soc_read(ctrl->soc, BRCMNAND_NON_MMIO_FC_ADDR);
- 	return __raw_readl(ctrl->nand_fc + word * 4);
- }
- 
- static inline void brcmnand_write_fc(struct brcmnand_controller *ctrl,
- 				     int word, u32 val)
- {
--	__raw_writel(val, ctrl->nand_fc + word * 4);
-+	if (brcmnand_non_mmio_ops(ctrl))
-+		brcmnand_soc_write(ctrl->soc, val, BRCMNAND_NON_MMIO_FC_ADDR);
-+	else
-+		__raw_writel(val, ctrl->nand_fc + word * 4);
- }
- 
- static inline void edu_writel(struct brcmnand_controller *ctrl,
-@@ -2951,6 +2969,12 @@ int brcmnand_probe(struct platform_devic
- 	ctrl->dev = dev;
- 	ctrl->soc = soc;
- 
-+	/* Enable the static key if the soc provides I/O operations indicating
-+	 * that a non-memory mapped IO access path must be used
-+	 */
-+	if (brcmnand_soc_has_ops(ctrl->soc))
-+		static_branch_enable(&brcmnand_soc_has_ops_key);
-+
- 	init_completion(&ctrl->done);
- 	init_completion(&ctrl->dma_done);
- 	init_completion(&ctrl->edu_done);
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.h
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.h
-@@ -11,12 +11,25 @@
- 
- struct platform_device;
- struct dev_pm_ops;
-+struct brcmnand_io_ops;
-+
-+/* Special register offset constant to intercept a non-MMIO access
-+ * to the flash cache register space. This is intentionally large
-+ * not to overlap with an existing offset.
-+ */
-+#define BRCMNAND_NON_MMIO_FC_ADDR	0xffffffff
- 
- struct brcmnand_soc {
- 	bool (*ctlrdy_ack)(struct brcmnand_soc *soc);
- 	void (*ctlrdy_set_enabled)(struct brcmnand_soc *soc, bool en);
- 	void (*prepare_data_bus)(struct brcmnand_soc *soc, bool prepare,
- 				 bool is_param);
-+	const struct brcmnand_io_ops *ops;
-+};
-+
-+struct brcmnand_io_ops {
-+	u32 (*read_reg)(struct brcmnand_soc *soc, u32 offset);
-+	void (*write_reg)(struct brcmnand_soc *soc, u32 val, u32 offset);
- };
- 
- static inline void brcmnand_soc_data_bus_prepare(struct brcmnand_soc *soc,
-@@ -58,6 +71,22 @@ static inline void brcmnand_writel(u32 v
- 		writel_relaxed(val, addr);
- }
- 
-+static inline bool brcmnand_soc_has_ops(struct brcmnand_soc *soc)
-+{
-+	return soc && soc->ops && soc->ops->read_reg && soc->ops->write_reg;
-+}
-+
-+static inline u32 brcmnand_soc_read(struct brcmnand_soc *soc, u32 offset)
-+{
-+	return soc->ops->read_reg(soc, offset);
-+}
-+
-+static inline void brcmnand_soc_write(struct brcmnand_soc *soc, u32 val,
-+				      u32 offset)
-+{
-+	soc->ops->write_reg(soc, val, offset);
-+}
-+
- int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc);
- int brcmnand_remove(struct platform_device *pdev);
- 
diff --git a/target/linux/bcm47xx/patches-5.10/102-v5.18-mtd-rawnand-brcmnand-Avoid-pdev-in-brcmnand_init_cs.patch b/target/linux/bcm47xx/patches-5.10/102-v5.18-mtd-rawnand-brcmnand-Avoid-pdev-in-brcmnand_init_cs.patch
deleted file mode 100644
index d9324c25953e..000000000000
--- a/target/linux/bcm47xx/patches-5.10/102-v5.18-mtd-rawnand-brcmnand-Avoid-pdev-in-brcmnand_init_cs.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: [PATCH v3 3/9] mtd: rawnand: brcmnand: Avoid pdev in brcmnand_init_cs()
-Date: Fri, 07 Jan 2022 10:46:08 -0800
-Content-Type: text/plain; charset="utf-8"
-
-In preparation for encapsulating more of what the loop calling
-brcmnand_init_cs() does, avoid using platform_device when it is the
-device behind platform_device that we are using for printing errors.
-
-No functional changes introduced.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -2722,7 +2722,7 @@ static const struct nand_controller_ops
- static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
- {
- 	struct brcmnand_controller *ctrl = host->ctrl;
--	struct platform_device *pdev = host->pdev;
-+	struct device *dev = ctrl->dev;
- 	struct mtd_info *mtd;
- 	struct nand_chip *chip;
- 	int ret;
-@@ -2730,7 +2730,7 @@ static int brcmnand_init_cs(struct brcmn
- 
- 	ret = of_property_read_u32(dn, "reg", &host->cs);
- 	if (ret) {
--		dev_err(&pdev->dev, "can't get chip-select\n");
-+		dev_err(dev, "can't get chip-select\n");
- 		return -ENXIO;
- 	}
- 
-@@ -2739,13 +2739,13 @@ static int brcmnand_init_cs(struct brcmn
- 
- 	nand_set_flash_node(chip, dn);
- 	nand_set_controller_data(chip, host);
--	mtd->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "brcmnand.%d",
-+	mtd->name = devm_kasprintf(dev, GFP_KERNEL, "brcmnand.%d",
- 				   host->cs);
- 	if (!mtd->name)
- 		return -ENOMEM;
- 
- 	mtd->owner = THIS_MODULE;
--	mtd->dev.parent = &pdev->dev;
-+	mtd->dev.parent = dev;
- 
- 	chip->legacy.cmd_ctrl = brcmnand_cmd_ctrl;
- 	chip->legacy.cmdfunc = brcmnand_cmdfunc;
diff --git a/target/linux/bcm47xx/patches-5.10/103-v5.18-mtd-rawnand-brcmnand-Move-OF-operations-out-of-brcmnand_init_cs.patch b/target/linux/bcm47xx/patches-5.10/103-v5.18-mtd-rawnand-brcmnand-Move-OF-operations-out-of-brcmnand_init_cs.patch
deleted file mode 100644
index 34fd1b47eab4..000000000000
--- a/target/linux/bcm47xx/patches-5.10/103-v5.18-mtd-rawnand-brcmnand-Move-OF-operations-out-of-brcmnand_init_cs.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: [PATCH v3 4/9] mtd: rawnand: brcmnand: Move OF operations out of brcmnand_init_cs()
-Date: Fri, 07 Jan 2022 10:46:09 -0800
-Content-Type: text/plain; charset="utf-8"
-
-In order to initialize a given chip select object for use by the
-brcmnand driver, move all of the Device Tree specific routines outside
-of brcmnand_init_cs() in order to make it usable in a platform data
-configuration which will be necessary for supporting BCMA chips.
-
-No functional changes introduced.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 20 +++++++++++---------
- 1 file changed, 11 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -2719,7 +2719,7 @@ static const struct nand_controller_ops
- 	.attach_chip = brcmnand_attach_chip,
- };
- 
--static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
-+static int brcmnand_init_cs(struct brcmnand_host *host)
- {
- 	struct brcmnand_controller *ctrl = host->ctrl;
- 	struct device *dev = ctrl->dev;
-@@ -2728,16 +2728,9 @@ static int brcmnand_init_cs(struct brcmn
- 	int ret;
- 	u16 cfg_offs;
- 
--	ret = of_property_read_u32(dn, "reg", &host->cs);
--	if (ret) {
--		dev_err(dev, "can't get chip-select\n");
--		return -ENXIO;
--	}
--
- 	mtd = nand_to_mtd(&host->chip);
- 	chip = &host->chip;
- 
--	nand_set_flash_node(chip, dn);
- 	nand_set_controller_data(chip, host);
- 	mtd->name = devm_kasprintf(dev, GFP_KERNEL, "brcmnand.%d",
- 				   host->cs);
-@@ -3144,7 +3137,16 @@ int brcmnand_probe(struct platform_devic
- 			host->pdev = pdev;
- 			host->ctrl = ctrl;
- 
--			ret = brcmnand_init_cs(host, child);
-+			ret = of_property_read_u32(child, "reg", &host->cs);
-+			if (ret) {
-+				dev_err(dev, "can't get chip-select\n");
-+				devm_kfree(dev, host);
-+				continue;
-+			}
-+
-+			nand_set_flash_node(&host->chip, child);
-+
-+			ret = brcmnand_init_cs(host);
- 			if (ret) {
- 				devm_kfree(dev, host);
- 				continue; /* Try all chip-selects */
diff --git a/target/linux/bcm47xx/patches-5.10/104-v5.18-mtd-rawnand-brcmnand-Allow-working-without-interrupts.patch b/target/linux/bcm47xx/patches-5.10/104-v5.18-mtd-rawnand-brcmnand-Allow-working-without-interrupts.patch
deleted file mode 100644
index 3a9d18fa21c9..000000000000
--- a/target/linux/bcm47xx/patches-5.10/104-v5.18-mtd-rawnand-brcmnand-Allow-working-without-interrupts.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: [PATCH v3 5/9] mtd: rawnand: brcmnand: Allow working without interrupts
-Date: Fri, 07 Jan 2022 10:46:10 -0800
-Content-Type: text/plain; charset="utf-8"
-
-The BCMA devices include the brcmnand controller but they do not wire up
-any interrupt line, allow the main interrupt to be optional and update
-the completion path to also check for the lack of an interrupt line.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 52 +++++++++++-------------
- 1 file changed, 24 insertions(+), 28 deletions(-)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -216,7 +216,7 @@ struct brcmnand_controller {
- 	void __iomem		*nand_base;
- 	void __iomem		*nand_fc; /* flash cache */
- 	void __iomem		*flash_dma_base;
--	unsigned int		irq;
-+	int			irq;
- 	unsigned int		dma_irq;
- 	int			nand_version;
- 
-@@ -1590,7 +1590,7 @@ static bool brcmstb_nand_wait_for_comple
- 	bool err = false;
- 	int sts;
- 
--	if (mtd->oops_panic_write) {
-+	if (mtd->oops_panic_write || ctrl->irq < 0) {
- 		/* switch to interrupt polling and PIO mode */
- 		disable_ctrl_irqs(ctrl);
- 		sts = bcmnand_ctrl_poll_status(ctrl, NAND_CTRL_RDY,
-@@ -3095,33 +3095,29 @@ int brcmnand_probe(struct platform_devic
- 	}
- 
- 	/* IRQ */
--	ctrl->irq = platform_get_irq(pdev, 0);
--	if ((int)ctrl->irq < 0) {
--		dev_err(dev, "no IRQ defined\n");
--		ret = -ENODEV;
--		goto err;
--	}
--
--	/*
--	 * Some SoCs integrate this controller (e.g., its interrupt bits) in
--	 * interesting ways
--	 */
--	if (soc) {
--		ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
--				       DRV_NAME, ctrl);
--
--		/* Enable interrupt */
--		ctrl->soc->ctlrdy_ack(ctrl->soc);
--		ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
--	} else {
--		/* Use standard interrupt infrastructure */
--		ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
--				       DRV_NAME, ctrl);
--	}
--	if (ret < 0) {
--		dev_err(dev, "can't allocate IRQ %d: error %d\n",
--			ctrl->irq, ret);
--		goto err;
-+	ctrl->irq = platform_get_irq_optional(pdev, 0);
-+	if (ctrl->irq > 0) {
-+		/*
-+		 * Some SoCs integrate this controller (e.g., its interrupt bits) in
-+		 * interesting ways
-+		 */
-+		if (soc) {
-+			ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
-+					       DRV_NAME, ctrl);
-+
-+			/* Enable interrupt */
-+			ctrl->soc->ctlrdy_ack(ctrl->soc);
-+			ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
-+		} else {
-+			/* Use standard interrupt infrastructure */
-+			ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
-+					       DRV_NAME, ctrl);
-+		}
-+		if (ret < 0) {
-+			dev_err(dev, "can't allocate IRQ %d: error %d\n",
-+				ctrl->irq, ret);
-+			goto err;
-+		}
- 	}
- 
- 	for_each_available_child_of_node(dn, child) {
diff --git a/target/linux/bcm47xx/patches-5.10/105-v5.18-mtd-rawnand-brcmnand-Add-platform-data-structure-for-BCMA.patch b/target/linux/bcm47xx/patches-5.10/105-v5.18-mtd-rawnand-brcmnand-Add-platform-data-structure-for-BCMA.patch
deleted file mode 100644
index 973a3e95ee13..000000000000
--- a/target/linux/bcm47xx/patches-5.10/105-v5.18-mtd-rawnand-brcmnand-Add-platform-data-structure-for-BCMA.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: [PATCH v3 6/9] mtd: rawnand: brcmnand: Add platform data structure for BCMA
-Date: Fri, 07 Jan 2022 10:46:11 -0800
-Content-Type: text/plain; charset="utf-8"
-
-Update the BCMA's chipcommon nand flash driver to detect which
-chip-select is used and pass that information via platform data to the
-brcmnand driver. Make sure that the brcmnand platform data structure is
-always at the beginning of the platform data of the "nflash" device
-created by BCMA to allow brcmnand to safely de-reference it.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- MAINTAINERS                                 |  1 +
- drivers/bcma/driver_chipcommon_nflash.c     | 20 +++++++++++++++++++-
- include/linux/bcma/bcma_driver_chipcommon.h |  5 +++++
- include/linux/platform_data/brcmnand.h      | 12 ++++++++++++
- 4 files changed, 37 insertions(+), 1 deletion(-)
- create mode 100644 include/linux/platform_data/brcmnand.h
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3712,6 +3712,7 @@ L:	linux-mtd@lists.infradead.org
- L:	bcm-kernel-feedback-list@broadcom.com
- S:	Maintained
- F:	drivers/mtd/nand/raw/brcmnand/
-+F:	include/linux/platform_data/brcmnand.h
- 
- BROADCOM SYSTEMPORT ETHERNET DRIVER
- M:	Florian Fainelli <f.fainelli@gmail.com>
---- a/drivers/bcma/driver_chipcommon_nflash.c
-+++ b/drivers/bcma/driver_chipcommon_nflash.c
-@@ -7,18 +7,28 @@
- 
- #include "bcma_private.h"
- 
-+#include <linux/bitops.h>
- #include <linux/platform_device.h>
-+#include <linux/platform_data/brcmnand.h>
- #include <linux/bcma/bcma.h>
- 
-+/* Alternate NAND controller driver name in order to allow both bcm47xxnflash
-+ * and bcma_brcmnand to be built into the same kernel image.
-+ */
-+static const char *bcma_nflash_alt_name = "bcma_brcmnand";
-+
- struct platform_device bcma_nflash_dev = {
- 	.name		= "bcma_nflash",
- 	.num_resources	= 0,
- };
- 
-+static const char *probes[] = { "bcm47xxpart", NULL };
-+
- /* Initialize NAND flash access */
- int bcma_nflash_init(struct bcma_drv_cc *cc)
- {
- 	struct bcma_bus *bus = cc->core->bus;
-+	u32 reg;
- 
- 	if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 &&
- 	    cc->core->id.rev != 38) {
-@@ -33,8 +43,16 @@ int bcma_nflash_init(struct bcma_drv_cc
- 
- 	cc->nflash.present = true;
- 	if (cc->core->id.rev == 38 &&
--	    (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT))
-+	    (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT)) {
- 		cc->nflash.boot = true;
-+		/* Determine the chip select that is being used */
-+		reg = bcma_cc_read32(cc, BCMA_CC_NAND_CS_NAND_SELECT) & 0xff;
-+		cc->nflash.brcmnand_info.chip_select = ffs(reg) - 1;
-+		cc->nflash.brcmnand_info.part_probe_types = probes;
-+		cc->nflash.brcmnand_info.ecc_stepsize = 512;
-+		cc->nflash.brcmnand_info.ecc_strength = 1;
-+		bcma_nflash_dev.name = bcma_nflash_alt_name;
-+	}
- 
- 	/* Prepare platform device, but don't register it yet. It's too early,
- 	 * malloc (required by device_private_init) is not available yet. */
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -3,6 +3,7 @@
- #define LINUX_BCMA_DRIVER_CC_H_
- 
- #include <linux/platform_device.h>
-+#include <linux/platform_data/brcmnand.h>
- #include <linux/gpio.h>
- 
- /** ChipCommon core registers. **/
-@@ -599,6 +600,10 @@ struct bcma_sflash {
- 
- #ifdef CONFIG_BCMA_NFLASH
- struct bcma_nflash {
-+	/* Must be the fist member for the brcmnand driver to
-+	 * de-reference that structure.
-+	 */
-+	struct brcmnand_platform_data brcmnand_info;
- 	bool present;
- 	bool boot;		/* This is the flash the SoC boots from */
- };
---- /dev/null
-+++ b/include/linux/platform_data/brcmnand.h
-@@ -0,0 +1,12 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+#ifndef BRCMNAND_PLAT_DATA_H
-+#define BRCMNAND_PLAT_DATA_H
-+
-+struct brcmnand_platform_data {
-+	int	chip_select;
-+	const char * const *part_probe_types;
-+	unsigned int ecc_stepsize;
-+	unsigned int ecc_strength;
-+};
-+
-+#endif /* BRCMNAND_PLAT_DATA_H */
diff --git a/target/linux/bcm47xx/patches-5.10/106-v5.18-mtd-rawnand-brcmnand-Allow-platform-data-instantation.patch b/target/linux/bcm47xx/patches-5.10/106-v5.18-mtd-rawnand-brcmnand-Allow-platform-data-instantation.patch
deleted file mode 100644
index fb9ee07d041d..000000000000
--- a/target/linux/bcm47xx/patches-5.10/106-v5.18-mtd-rawnand-brcmnand-Allow-platform-data-instantation.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: [PATCH v3 7/9] mtd: rawnand: brcmnand: Allow platform data instantation
-Date: Fri, 07 Jan 2022 10:46:12 -0800
-Content-Type: text/plain; charset="utf-8"
-
-Make use of the recently refactored code in brcmnand_init_cs() and
-derive the chip-select from the platform data that is supplied. Update
-the various code paths to avoid relying on possibly non-existent
-resources, too.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 45 ++++++++++++++++++------
- 1 file changed, 35 insertions(+), 10 deletions(-)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -9,6 +9,7 @@
- #include <linux/delay.h>
- #include <linux/device.h>
- #include <linux/platform_device.h>
-+#include <linux/platform_data/brcmnand.h>
- #include <linux/err.h>
- #include <linux/completion.h>
- #include <linux/interrupt.h>
-@@ -2719,7 +2720,8 @@ static const struct nand_controller_ops
- 	.attach_chip = brcmnand_attach_chip,
- };
- 
--static int brcmnand_init_cs(struct brcmnand_host *host)
-+static int brcmnand_init_cs(struct brcmnand_host *host,
-+			    const char * const *part_probe_types)
- {
- 	struct brcmnand_controller *ctrl = host->ctrl;
- 	struct device *dev = ctrl->dev;
-@@ -2772,7 +2774,7 @@ static int brcmnand_init_cs(struct brcmn
- 	if (ret)
- 		return ret;
- 
--	ret = mtd_device_register(mtd, NULL, 0);
-+	ret = mtd_device_parse_register(mtd, part_probe_types, NULL, NULL, 0);
- 	if (ret)
- 		nand_cleanup(chip);
- 
-@@ -2941,17 +2943,15 @@ static int brcmnand_edu_setup(struct pla
- 
- int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
- {
-+	struct brcmnand_platform_data *pd = dev_get_platdata(&pdev->dev);
- 	struct device *dev = &pdev->dev;
- 	struct device_node *dn = dev->of_node, *child;
- 	struct brcmnand_controller *ctrl;
-+	struct brcmnand_host *host;
- 	struct resource *res;
- 	int ret;
- 
--	/* We only support device-tree instantiation */
--	if (!dn)
--		return -ENODEV;
--
--	if (!of_match_node(brcmnand_of_match, dn))
-+	if (dn && !of_match_node(brcmnand_of_match, dn))
- 		return -ENODEV;
- 
- 	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
-@@ -2978,7 +2978,7 @@ int brcmnand_probe(struct platform_devic
- 	/* NAND register range */
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	ctrl->nand_base = devm_ioremap_resource(dev, res);
--	if (IS_ERR(ctrl->nand_base))
-+	if (IS_ERR(ctrl->nand_base) && !brcmnand_soc_has_ops(soc))
- 		return PTR_ERR(ctrl->nand_base);
- 
- 	/* Enable clock before using NAND registers */
-@@ -3122,7 +3122,6 @@ int brcmnand_probe(struct platform_devic
- 
- 	for_each_available_child_of_node(dn, child) {
- 		if (of_device_is_compatible(child, "brcm,nandcs")) {
--			struct brcmnand_host *host;
- 
- 			host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
- 			if (!host) {
-@@ -3142,7 +3141,7 @@ int brcmnand_probe(struct platform_devic
- 
- 			nand_set_flash_node(&host->chip, child);
- 
--			ret = brcmnand_init_cs(host);
-+			ret = brcmnand_init_cs(host, NULL);
- 			if (ret) {
- 				devm_kfree(dev, host);
- 				continue; /* Try all chip-selects */
-@@ -3152,6 +3151,32 @@ int brcmnand_probe(struct platform_devic
- 		}
- 	}
- 
-+	if (!list_empty(&ctrl->host_list))
-+		return 0;
-+
-+	if (!pd) {
-+		ret = -ENODEV;
-+		goto err;
-+	}
-+
-+	/* If we got there we must have been probing via platform data */
-+	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
-+	if (!host) {
-+		ret = -ENOMEM;
-+		goto err;
-+	}
-+	host->pdev = pdev;
-+	host->ctrl = ctrl;
-+	host->cs = pd->chip_select;
-+	host->chip.ecc.size = pd->ecc_stepsize;
-+	host->chip.ecc.strength = pd->ecc_strength;
-+
-+	ret = brcmnand_init_cs(host, pd->part_probe_types);
-+	if (ret)
-+		goto err;
-+
-+	list_add_tail(&host->node, &ctrl->host_list);
-+
- 	/* No chip-selects could initialize properly */
- 	if (list_empty(&ctrl->host_list)) {
- 		ret = -ENODEV;
diff --git a/target/linux/bcm47xx/patches-5.10/107-v5.18-mtd-rawnand-brcmnand-BCMA-controller-uses-command-shift-of-0.patch b/target/linux/bcm47xx/patches-5.10/107-v5.18-mtd-rawnand-brcmnand-BCMA-controller-uses-command-shift-of-0.patch
deleted file mode 100644
index 39f34aab29d4..000000000000
--- a/target/linux/bcm47xx/patches-5.10/107-v5.18-mtd-rawnand-brcmnand-BCMA-controller-uses-command-shift-of-0.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: [PATCH v3 8/9] mtd: rawnand: brcmnand: BCMA controller uses command shift of 0
-Date: Fri, 07 Jan 2022 10:46:13 -0800
-Content-Type: text/plain; charset="utf-8"
-
-For some odd and unexplained reason the BCMA NAND controller, albeit
-revision 3.4 uses a command shift of 0 instead of 24 as it should be,
-quirk that.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -913,6 +913,12 @@ static void brcmnand_wr_corr_thresh(stru
- 
- static inline int brcmnand_cmd_shift(struct brcmnand_controller *ctrl)
- {
-+	/* Kludge for the BCMA-based NAND controller which does not actually
-+	 * shift the command
-+	 */
-+	if (ctrl->nand_version == 0x0304 && brcmnand_non_mmio_ops(ctrl))
-+		return 0;
-+
- 	if (ctrl->nand_version < 0x0602)
- 		return 24;
- 	return 0;
diff --git a/target/linux/bcm47xx/patches-5.10/108-v5.18-mtd-rawnand-brcmnand-Add-BCMA-shim.patch b/target/linux/bcm47xx/patches-5.10/108-v5.18-mtd-rawnand-brcmnand-Add-BCMA-shim.patch
deleted file mode 100644
index eabb4c24750e..000000000000
--- a/target/linux/bcm47xx/patches-5.10/108-v5.18-mtd-rawnand-brcmnand-Add-BCMA-shim.patch
+++ /dev/null
@@ -1,201 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: [PATCH v3 9/9] mtd: rawnand: brcmnand: Add BCMA shim
-Date: Fri, 07 Jan 2022 10:46:14 -0800
-Content-Type: text/plain; charset="utf-8"
-
-Add a BCMA shim to allow us to register the brcmnand driver using the
-BCMA bus which provides indirect memory mapped access to SoC registers.
-
-There are a number of registers that need to be byte swapped because
-they are natively big endian, coming directly from the NAND chip, and
-there is no bus interface unlike the iProc or STB platforms that
-performs the byte swapping for us.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/mtd/nand/raw/Kconfig              |  13 +++
- drivers/mtd/nand/raw/brcmnand/Makefile    |   2 +
- drivers/mtd/nand/raw/brcmnand/bcma_nand.c | 132 ++++++++++++++++++++++
- drivers/mtd/nand/raw/brcmnand/brcmnand.c  |   4 +
- 4 files changed, 151 insertions(+)
- create mode 100644 drivers/mtd/nand/raw/brcmnand/bcma_nand.c
-
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -236,6 +236,19 @@ config MTD_NAND_BRCMNAND
- 	  originally designed for Set-Top Box but is used on various BCM7xxx,
- 	  BCM3xxx, BCM63xxx, iProc/Cygnus and more.
- 
-+if MTD_NAND_BRCMNAND
-+
-+config MTD_NAND_BRCMNAND_BCMA
-+	tristate "Broadcom BCMA NAND controller"
-+	depends on BCMA_NFLASH
-+	depends on BCMA
-+	help
-+	  Enables the BRCMNAND controller over BCMA on BCM47186/BCM5358 SoCs.
-+	  The glue driver will take care of performing the low-level I/O
-+	  operations to interface the BRCMNAND controller over the BCMA bus.
-+
-+endif # MTD_NAND_BRCMNAND
-+
- config MTD_NAND_BCM47XXNFLASH
- 	tristate "BCM4706 BCMA NAND controller"
- 	depends on BCMA_NFLASH
---- a/drivers/mtd/nand/raw/brcmnand/Makefile
-+++ b/drivers/mtd/nand/raw/brcmnand/Makefile
-@@ -6,3 +6,5 @@ obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm6
- obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm6368_nand.o
- obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmstb_nand.o
- obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand.o
-+
-+obj-$(CONFIG_MTD_NAND_BRCMNAND_BCMA)	+= bcma_nand.o
---- /dev/null
-+++ b/drivers/mtd/nand/raw/brcmnand/bcma_nand.c
-@@ -0,0 +1,132 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright © 2021 Broadcom
-+ */
-+#include <linux/bcma/bcma.h>
-+#include <linux/bcma/bcma_driver_chipcommon.h>
-+#include <linux/device.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include "brcmnand.h"
-+
-+struct brcmnand_bcma_soc {
-+	struct brcmnand_soc soc;
-+	struct bcma_drv_cc *cc;
-+};
-+
-+static inline bool brcmnand_bcma_needs_swapping(u32 offset)
-+{
-+	switch (offset) {
-+	case BCMA_CC_NAND_SPARE_RD0:
-+	case BCMA_CC_NAND_SPARE_RD4:
-+	case BCMA_CC_NAND_SPARE_RD8:
-+	case BCMA_CC_NAND_SPARE_RD12:
-+	case BCMA_CC_NAND_SPARE_WR0:
-+	case BCMA_CC_NAND_SPARE_WR4:
-+	case BCMA_CC_NAND_SPARE_WR8:
-+	case BCMA_CC_NAND_SPARE_WR12:
-+	case BCMA_CC_NAND_DEVID:
-+	case BCMA_CC_NAND_DEVID_X:
-+	case BCMA_CC_NAND_SPARE_RD16:
-+	case BCMA_CC_NAND_SPARE_RD20:
-+	case BCMA_CC_NAND_SPARE_RD24:
-+	case BCMA_CC_NAND_SPARE_RD28:
-+		return true;
-+	}
-+
-+	return false;
-+}
-+
-+static inline struct brcmnand_bcma_soc *to_bcma_soc(struct brcmnand_soc *soc)
-+{
-+	return container_of(soc, struct brcmnand_bcma_soc, soc);
-+}
-+
-+static u32 brcmnand_bcma_read_reg(struct brcmnand_soc *soc, u32 offset)
-+{
-+	struct brcmnand_bcma_soc *sc = to_bcma_soc(soc);
-+	u32 val;
-+
-+	/* Offset into the NAND block and deal with the flash cache separately */
-+	if (offset == BRCMNAND_NON_MMIO_FC_ADDR)
-+		offset = BCMA_CC_NAND_CACHE_DATA;
-+	else
-+		offset += BCMA_CC_NAND_REVISION;
-+
-+	val = bcma_cc_read32(sc->cc, offset);
-+
-+	/* Swap if necessary */
-+	if (brcmnand_bcma_needs_swapping(offset))
-+		val = be32_to_cpu(val);
-+	return val;
-+}
-+
-+static void brcmnand_bcma_write_reg(struct brcmnand_soc *soc, u32 val,
-+				    u32 offset)
-+{
-+	struct brcmnand_bcma_soc *sc = to_bcma_soc(soc);
-+
-+	/* Offset into the NAND block */
-+	if (offset == BRCMNAND_NON_MMIO_FC_ADDR)
-+		offset = BCMA_CC_NAND_CACHE_DATA;
-+	else
-+		offset += BCMA_CC_NAND_REVISION;
-+
-+	/* Swap if necessary */
-+	if (brcmnand_bcma_needs_swapping(offset))
-+		val = cpu_to_be32(val);
-+
-+	bcma_cc_write32(sc->cc, offset, val);
-+}
-+
-+static struct brcmnand_io_ops brcmnand_bcma_io_ops = {
-+	.read_reg	= brcmnand_bcma_read_reg,
-+	.write_reg	= brcmnand_bcma_write_reg,
-+};
-+
-+static void brcmnand_bcma_prepare_data_bus(struct brcmnand_soc *soc, bool prepare,
-+					   bool is_param)
-+{
-+	struct brcmnand_bcma_soc *sc = to_bcma_soc(soc);
-+
-+	/* Reset the cache address to ensure we are already accessing the
-+	 * beginning of a sub-page.
-+	 */
-+	bcma_cc_write32(sc->cc, BCMA_CC_NAND_CACHE_ADDR, 0);
-+}
-+
-+static int brcmnand_bcma_nand_probe(struct platform_device *pdev)
-+{
-+	struct bcma_nflash *nflash = dev_get_platdata(&pdev->dev);
-+	struct brcmnand_bcma_soc *soc;
-+
-+	soc = devm_kzalloc(&pdev->dev, sizeof(*soc), GFP_KERNEL);
-+	if (!soc)
-+		return -ENOMEM;
-+
-+	soc->cc = container_of(nflash, struct bcma_drv_cc, nflash);
-+	soc->soc.prepare_data_bus = brcmnand_bcma_prepare_data_bus;
-+	soc->soc.ops = &brcmnand_bcma_io_ops;
-+
-+	if (soc->cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
-+		dev_err(&pdev->dev, "Use bcm47xxnflash for 4706!\n");
-+		return -ENODEV;
-+	}
-+
-+	return brcmnand_probe(pdev, &soc->soc);
-+}
-+
-+static struct platform_driver brcmnand_bcma_nand_driver = {
-+	.probe			= brcmnand_bcma_nand_probe,
-+	.remove			= brcmnand_remove,
-+	.driver = {
-+		.name		= "bcma_brcmnand",
-+		.pm		= &brcmnand_pm_ops,
-+	}
-+};
-+module_platform_driver(brcmnand_bcma_nand_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Broadcom");
-+MODULE_DESCRIPTION("NAND controller driver glue for BCMA chips");
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -595,7 +595,11 @@ enum {
- 
- static inline bool brcmnand_non_mmio_ops(struct brcmnand_controller *ctrl)
- {
-+#if IS_ENABLED(CONFIG_MTD_NAND_BRCMNAND_BCMA)
- 	return static_branch_unlikely(&brcmnand_soc_has_ops_key);
-+#else
-+	return false;
-+#endif
- }
- 
- static inline u32 nand_readreg(struct brcmnand_controller *ctrl, u32 offs)
diff --git a/target/linux/bcm47xx/patches-5.10/130-MIPS-BCM47XX-Add-support-for-Huawei-B593u-12.patch b/target/linux/bcm47xx/patches-5.10/130-MIPS-BCM47XX-Add-support-for-Huawei-B593u-12.patch
deleted file mode 100644
index 333c3d7b8707..000000000000
--- a/target/linux/bcm47xx/patches-5.10/130-MIPS-BCM47XX-Add-support-for-Huawei-B593u-12.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 27 Feb 2023 07:44:38 +0100
-Subject: [PATCH] MIPS: BCM47XX: Add support for Huawei B593u-12
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a BCM5358 based home router. One of very few bcm47xx devices with
-cellular modems (here: LTE).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/mips/bcm47xx/board.c                          | 1 +
- arch/mips/bcm47xx/leds.c                           | 8 ++++++++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -193,6 +193,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
- /* boardtype, boardnum, boardrev */
- static const
- struct bcm47xx_board_type_list3 bcm47xx_board_list_board[] __initconst = {
-+	{{BCM47XX_BOARD_HUAWEI_B593U_12, "Huawei B593u-12"}, "0x053d", "1234", "0x1301"},
- 	{{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
- 	{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
- 	{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -223,6 +223,11 @@ bcm47xx_leds_dlink_dir330[] __initconst
- /* Huawei */
- 
- static const struct gpio_led
-+bcm47xx_leds_huawei_b593u_12[] __initconst = {
-+	BCM47XX_GPIO_LED(5, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_huawei_e970[] __initconst = {
- 	BCM47XX_GPIO_LED(0, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
- };
-@@ -672,6 +677,9 @@ void __init bcm47xx_leds_register(void)
- 		bcm47xx_set_pdata(bcm47xx_leds_dlink_dir330);
- 		break;
- 
-+	case BCM47XX_BOARD_HUAWEI_B593U_12:
-+		bcm47xx_set_pdata(bcm47xx_leds_huawei_b593u_12);
-+		break;
- 	case BCM47XX_BOARD_HUAWEI_E970:
- 		bcm47xx_set_pdata(bcm47xx_leds_huawei_e970);
- 		break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -53,6 +53,7 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_DLINK_DIR130,
- 	BCM47XX_BOARD_DLINK_DIR330,
- 
-+	BCM47XX_BOARD_HUAWEI_B593U_12,
- 	BCM47XX_BOARD_HUAWEI_E970,
- 
- 	BCM47XX_BOARD_LINKSYS_E900V1,
diff --git a/target/linux/bcm47xx/patches-5.10/159-cpu_fixes.patch b/target/linux/bcm47xx/patches-5.10/159-cpu_fixes.patch
deleted file mode 100644
index eb4c0e6ac8f5..000000000000
--- a/target/linux/bcm47xx/patches-5.10/159-cpu_fixes.patch
+++ /dev/null
@@ -1,493 +0,0 @@
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -28,6 +28,38 @@
- extern void (*r4k_blast_dcache)(void);
- extern void (*r4k_blast_icache)(void);
- 
-+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
-+#include <asm/paccess.h>
-+#include <linux/ssb/ssb.h>
-+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
-+
-+static inline unsigned long bcm4710_dummy_rreg(void)
-+{
-+      return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
-+}
-+
-+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
-+
-+static inline unsigned long bcm4710_fill_tlb(void *addr)
-+{
-+      return *(unsigned long *)addr;
-+}
-+
-+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
-+
-+static inline void bcm4710_protected_fill_tlb(void *addr)
-+{
-+      unsigned long x;
-+      get_dbe(x, (unsigned long *)addr);;
-+}
-+
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
-  * This macro return a properly sign-extended address suitable as base address
-  * for indexed cache operations.  Two issues here:
-@@ -61,6 +93,7 @@ static inline void flush_icache_line_ind
- 
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Index_Writeback_Inv_D, addr);
- }
- 
-@@ -84,11 +117,13 @@ static inline void flush_icache_line(uns
- 
- static inline void flush_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Writeback_Inv_D, addr);
- }
- 
- static inline void invalidate_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Invalidate_D, addr);
- }
- 
-@@ -161,6 +196,7 @@ static inline int protected_flush_icache
- #ifdef CONFIG_EVA
- 		return protected_cachee_op(Hit_Invalidate_I, addr);
- #else
-+		BCM4710_DUMMY_RREG();
- 		return protected_cache_op(Hit_Invalidate_I, addr);
- #endif
- 	}
-@@ -174,6 +210,7 @@ static inline int protected_flush_icache
-  */
- static inline int protected_writeback_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- #ifdef CONFIG_EVA
- 	return protected_cachee_op(Hit_Writeback_Inv_D, addr);
- #else
-@@ -203,8 +240,51 @@ static inline void invalidate_tcache_pag
- 	unroll(times, _cache_op, insn, op, (addr) + (i++ * (lsize)));	\
- } while (0)
- 
-+static inline void blast_dcache(void)
-+{
-+	unsigned long start = KSEG0;
-+	unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+	unsigned long end = (start + dcache_size);
-+
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Index_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+
-+	BCM4710_FILL_TLB(start);
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Hit_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+	unsigned long ws_end = current_cpu_data.dcache.ways <<
-+	                       current_cpu_data.dcache.waybit;
-+	unsigned long ws, addr;
-+	for (ws = 0; ws < ws_end; ws += ws_inc) {
-+		start = page + ws;
-+		for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+			BCM4710_DUMMY_RREG();
-+			cache_op(Index_Writeback_Inv_D, addr);
-+		}
-+	}
-+}
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
--#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra)	\
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \
- static inline void extra##blast_##pfx##cache##lsize(void)		\
- {									\
- 	unsigned long start = INDEX_BASE;				\
-@@ -214,6 +294,7 @@ static inline void extra##blast_##pfx##c
- 			       current_cpu_data.desc.waybit;		\
- 	unsigned long ws, addr;						\
- 									\
-+	war								\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
- 		for (addr = start; addr < end; addr += lsize * 32)	\
- 			cache_unroll(32, kernel_cache, indexop,		\
-@@ -225,6 +306,7 @@ static inline void extra##blast_##pfx##c
- 	unsigned long start = page;					\
- 	unsigned long end = page + PAGE_SIZE;				\
- 									\
-+	war								\
- 	do {								\
- 		cache_unroll(32, kernel_cache, hitop, start, lsize);	\
- 		start += lsize * 32;					\
-@@ -241,32 +323,33 @@ static inline void extra##blast_##pfx##c
- 			       current_cpu_data.desc.waybit;		\
- 	unsigned long ws, addr;						\
- 									\
-+	war								\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
- 		for (addr = start; addr < end; addr += lsize * 32)	\
- 			cache_unroll(32, kernel_cache, indexop,		\
- 				     addr | ws, lsize);			\
- }
- 
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
--
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, , )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , )
-+
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , )
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , )
- 
- #define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \
- static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \
-@@ -291,58 +374,29 @@ __BUILD_BLAST_USER_CACHE(d, dcache, Inde
- __BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
- 
- /* build blast_xxx_range, protected_blast_xxx_range */
--#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra)	\
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2)	\
- static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
--	unsigned long lsize_2 = lsize * 2;				\
--	unsigned long lsize_3 = lsize * 3;				\
--	unsigned long lsize_4 = lsize * 4;				\
--	unsigned long lsize_5 = lsize * 5;				\
--	unsigned long lsize_6 = lsize * 6;				\
--	unsigned long lsize_7 = lsize * 7;				\
--	unsigned long lsize_8 = lsize * 8;				\
- 	unsigned long addr = start & ~(lsize - 1);			\
--	unsigned long aend = (end + lsize - 1) & ~(lsize - 1);		\
--	int lines = (aend - addr) / lsize;				\
--									\
--	while (lines >= 8) {						\
--		prot##cache_op(hitop, addr);				\
--		prot##cache_op(hitop, addr + lsize);			\
--		prot##cache_op(hitop, addr + lsize_2);			\
--		prot##cache_op(hitop, addr + lsize_3);			\
--		prot##cache_op(hitop, addr + lsize_4);			\
--		prot##cache_op(hitop, addr + lsize_5);			\
--		prot##cache_op(hitop, addr + lsize_6);			\
--		prot##cache_op(hitop, addr + lsize_7);			\
--		addr += lsize_8;					\
--		lines -= 8;						\
--	}								\
--									\
--	if (lines & 0x4) {						\
--		prot##cache_op(hitop, addr);				\
--		prot##cache_op(hitop, addr + lsize);			\
--		prot##cache_op(hitop, addr + lsize_2);			\
--		prot##cache_op(hitop, addr + lsize_3);			\
--		addr += lsize_4;					\
--	}								\
-+	unsigned long aend = (end - 1) & ~(lsize - 1);			\
- 									\
--	if (lines & 0x2) {						\
--		prot##cache_op(hitop, addr);				\
--		prot##cache_op(hitop, addr + lsize);			\
--		addr += lsize_2;					\
--	}								\
-+	war								\
- 									\
--	if (lines & 0x1) {						\
-+	while (1) {							\
-+		war2							\
- 		prot##cache_op(hitop, addr);				\
-+		if (addr == aend)					\
-+			break;						\
-+		addr += lsize;						\
- 	}								\
- }
- 
- #ifndef CONFIG_EVA
- 
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , )
- 
- #else
- 
-@@ -376,15 +430,15 @@ __BUILD_PROT_BLAST_CACHE_RANGE(d, dcache
- __BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I)
- 
- #endif
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , )
- __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \
--	protected_, loongson2_)
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , )
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
-+	protected_, loongson2_, , )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , , , )
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , )
- /* blast_inv_dcache_range */
--__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
--__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , )
- 
- /* Currently, this is very specific to Loongson-3 */
- #define __BUILD_BLAST_CACHE_NODE(pfx, desc, indexop, hitop, lsize)	\
---- a/arch/mips/include/asm/stackframe.h
-+++ b/arch/mips/include/asm/stackframe.h
-@@ -429,6 +429,10 @@
- #else
- 		.set	push
- 		.set	arch=r4000
-+#ifdef CONFIG_BCM47XX
-+		nop
-+		nop
-+#endif
- 		eret
- 		.set	pop
- #endif
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -22,6 +22,19 @@
- #include <asm/war.h>
- #include <asm/thread_info.h>
- 
-+#ifdef CONFIG_BCM47XX
-+# ifdef eret
-+#  undef eret
-+# endif
-+# define eret 					\
-+	.set push;				\
-+	.set noreorder;				\
-+	 nop; 					\
-+	 nop;					\
-+	 eret;					\
-+	.set pop;
-+#endif
-+
- 	__INIT
- 
- /*
-@@ -33,6 +46,9 @@
- NESTED(except_vec3_generic, 0, sp)
- 	.set	push
- 	.set	noat
-+#ifdef CONFIG_BCM47XX
-+	nop
-+#endif
- 	mfc0	k1, CP0_CAUSE
- 	andi	k1, k1, 0x7c
- #ifdef CONFIG_64BIT
-@@ -53,6 +69,9 @@ NESTED(except_vec3_r4000, 0, sp)
- 	.set	push
- 	.set	arch=r4000
- 	.set	noat
-+#ifdef CONFIG_BCM47XX
-+	nop
-+#endif
- 	mfc0	k1, CP0_CAUSE
- 	li	k0, 31<<2
- 	andi	k1, k1, 0x7c
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -38,6 +38,9 @@
- #include <asm/dma-coherence.h>
- #include <asm/mips-cps.h>
- 
-+/* For enabling BCM4710 cache workarounds */
-+static int bcm4710 = 0;
-+
- /*
-  * Bits describing what cache ops an SMP callback function may perform.
-  *
-@@ -190,6 +193,9 @@ static void r4k_blast_dcache_user_page_s
- {
- 	unsigned long  dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page = blast_dcache_page;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_user_page = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -208,6 +214,9 @@ static void r4k_blast_dcache_page_indexe
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_page_indexed = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -227,6 +236,9 @@ static void r4k_blast_dcache_setup(void)
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache = blast_dcache;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -1827,6 +1839,17 @@ static void coherency_setup(void)
- 	 * silly idea of putting something else there ...
- 	 */
- 	switch (current_cpu_type()) {
-+	case CPU_BMIPS3300:
-+		{
-+			u32 cm;
-+			cm = read_c0_diag();
-+			/* Enable icache */
-+			cm |= (1 << 31);
-+			/* Enable dcache */
-+			cm |= (1 << 30);
-+			write_c0_diag(cm);
-+		}
-+		break;
- 	case CPU_R4000PC:
- 	case CPU_R4000SC:
- 	case CPU_R4000MC:
-@@ -1873,6 +1896,15 @@ void r4k_cache_init(void)
- 	extern void build_copy_page(void);
- 	struct cpuinfo_mips *c = &current_cpu_data;
- 
-+	/* Check if special workarounds are required */
-+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
-+	if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
-+		printk("Enabling BCM4710A0 cache workarounds.\n");
-+		bcm4710 = 1;
-+	} else
-+#endif
-+		bcm4710 = 0;
-+
- 	probe_pcache();
- 	probe_vcache();
- 	setup_scache();
-@@ -1949,7 +1981,15 @@ void r4k_cache_init(void)
- 	 */
- 	local_r4k___flush_cache_all(NULL);
- 
-+#ifdef CONFIG_BCM47XX
-+	{
-+		static void (*_coherency_setup)(void);
-+		_coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
-+		_coherency_setup();
-+	}
-+#else
- 	coherency_setup();
-+#endif
- 	board_cache_error_setup = r4k_cache_error_setup;
- 
- 	/*
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -984,6 +984,9 @@ void build_get_pgde32(u32 **p, unsigned
- 		uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
- 		uasm_i_addu(p, ptr, tmp, ptr);
- #else
-+#ifdef CONFIG_BCM47XX
-+		uasm_i_nop(p);
-+#endif
- 		UASM_i_LA_mostly(p, ptr, pgdc);
- #endif
- 		uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-@@ -1345,6 +1348,9 @@ static void build_r4000_tlb_refill_handl
- #ifdef CONFIG_64BIT
- 		build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-+# ifdef CONFIG_BCM47XX
-+		uasm_i_nop(&p);
-+# endif
- 		build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
- #endif
- 
-@@ -1356,6 +1362,9 @@ static void build_r4000_tlb_refill_handl
- 		build_update_entries(&p, K0, K1);
- 		build_tlb_write_entry(&p, &l, &r, tlb_random);
- 		uasm_l_leave(&l, p);
-+#ifdef CONFIG_BCM47XX
-+		uasm_i_nop(&p);
-+#endif
- 		uasm_i_eret(&p); /* return from trap */
- 	}
- #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
-@@ -2056,6 +2065,9 @@ build_r4000_tlbchange_handler_head(u32 *
- #ifdef CONFIG_64BIT
- 	build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
- #else
-+# ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+# endif
- 	build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
- #endif
- 
-@@ -2102,6 +2114,9 @@ build_r4000_tlbchange_handler_tail(u32 *
- 	build_tlb_write_entry(p, l, r, tlb_indexed);
- 	uasm_l_leave(l, *p);
- 	build_restore_work_registers(p);
-+#ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+#endif
- 	uasm_i_eret(p); /* return from trap */
- 
- #ifdef CONFIG_64BIT
diff --git a/target/linux/bcm47xx/patches-5.10/160-kmap_coherent.patch b/target/linux/bcm47xx/patches-5.10/160-kmap_coherent.patch
deleted file mode 100644
index c85fa0be4cfe..000000000000
--- a/target/linux/bcm47xx/patches-5.10/160-kmap_coherent.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From: Jeff Hansen <jhansen@cardaccess-inc.com>
-Subject: [PATCH] kmap_coherent
-
-On ASUS WL-500gP there are some "Data bus error"s when executing simple
-commands liks "ps" or "cat /proc/1/cmdline".
-
-This fixes OpenWrt ticket #1485: https://dev.openwrt.org/ticket/1485
----
---- a/arch/mips/include/asm/cpu-features.h
-+++ b/arch/mips/include/asm/cpu-features.h
-@@ -242,6 +242,9 @@
- #ifndef cpu_has_pindexed_dcache
- #define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
- #endif
-+#ifndef cpu_use_kmap_coherent
-+#define cpu_use_kmap_coherent 1
-+#endif
- 
- /*
-  * I-Cache snoops remote store.	 This only matters on SMP.  Some multiprocessors
---- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-@@ -80,4 +80,6 @@
- #define cpu_scache_line_size()		0
- #define cpu_has_vz			0
- 
-+#define cpu_use_kmap_coherent		0
-+
- #endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -702,7 +702,7 @@ static inline void local_r4k_flush_cache
- 		map_coherent = (cpu_has_dc_aliases &&
- 				page_mapcount(page) &&
- 				!Page_dcache_dirty(page));
--		if (map_coherent)
-+		if (map_coherent && cpu_use_kmap_coherent)
- 			vaddr = kmap_coherent(page, addr);
- 		else
- 			vaddr = kmap_atomic(page);
-@@ -729,7 +729,7 @@ static inline void local_r4k_flush_cache
- 	}
- 
- 	if (vaddr) {
--		if (map_coherent)
-+		if (map_coherent && cpu_use_kmap_coherent)
- 			kunmap_coherent();
- 		else
- 			kunmap_atomic(vaddr);
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -173,7 +173,7 @@ void copy_user_highpage(struct page *to,
- 	void *vfrom, *vto;
- 
- 	vto = kmap_atomic(to);
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapcount(from) && !Page_dcache_dirty(from)) {
- 		vfrom = kmap_coherent(from, vaddr);
- 		copy_page(vto, vfrom);
-@@ -195,7 +195,7 @@ void copy_to_user_page(struct vm_area_st
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapcount(page) && !Page_dcache_dirty(page)) {
- 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(vto, src, len);
-@@ -213,7 +213,7 @@ void copy_from_user_page(struct vm_area_
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapcount(page) && !Page_dcache_dirty(page)) {
- 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(dst, vfrom, len);
diff --git a/target/linux/bcm47xx/patches-5.10/209-b44-register-adm-switch.patch b/target/linux/bcm47xx/patches-5.10/209-b44-register-adm-switch.patch
deleted file mode 100644
index 7728ec10942f..000000000000
--- a/target/linux/bcm47xx/patches-5.10/209-b44-register-adm-switch.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 9 Nov 2013 17:03:59 +0100
-Subject: [PATCH 210/210] b44: register adm switch
-
----
- drivers/net/ethernet/broadcom/b44.c |   57 +++++++++++++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/b44.h |    3 ++
- 2 files changed, 60 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -31,6 +31,8 @@
- #include <linux/ssb/ssb.h>
- #include <linux/slab.h>
- #include <linux/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/adm6996-gpio.h>
- 
- #include <linux/uaccess.h>
- #include <asm/io.h>
-@@ -2243,6 +2245,69 @@ static void b44_adjust_link(struct net_d
- 	}
- }
- 
-+#ifdef CONFIG_BCM47XX
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+	int gpio;
-+	struct platform_device *pdev;
-+	struct adm6996_gpio_platform_data adm_data = {0};
-+	struct platform_device_info info = {0};
-+
-+	adm_data.model = ADM6996L;
-+	gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
-+	if (gpio >= 0)
-+		adm_data.eecs = gpio;
-+	else
-+		adm_data.eecs = 2;
-+
-+	gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
-+	if (gpio >= 0)
-+		adm_data.eesk = gpio;
-+	else
-+		adm_data.eesk = 3;
-+
-+	gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
-+	if (gpio >= 0)
-+		adm_data.eedi = gpio;
-+	else
-+		adm_data.eedi = 4;
-+
-+	/*
-+	 * We ignore the "adm_rc" GPIO here. The driver does not use it,
-+	 * and it conflicts with the Reset button GPIO on the Linksys WRT54GSv1.
-+	 */
-+
-+	info.parent = bp->sdev->dev;
-+	info.name = "adm6996_gpio";
-+	info.id = -1;
-+	info.data = &adm_data;
-+	info.size_data = sizeof(adm_data);
-+
-+	if (!bp->adm_switch) {
-+		pdev = platform_device_register_full(&info);
-+		if (IS_ERR(pdev))
-+			return PTR_ERR(pdev);
-+
-+		bp->adm_switch = pdev;
-+	}
-+	return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+	if (bp->adm_switch)
-+		platform_device_unregister(bp->adm_switch);
-+}
-+#else
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+	return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+
-+}
-+#endif /* CONFIG_BCM47XX */
-+
- static int b44_register_phy_one(struct b44 *bp)
- {
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-@@ -2279,6 +2344,9 @@ static int b44_register_phy_one(struct b
- 	if (!mdiobus_is_registered_device(bp->mii_bus, bp->phy_addr) &&
- 	    (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
- 
-+		if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
-+			b44_register_adm_switch(bp);
-+
- 		dev_info(sdev->dev,
- 			 "could not find PHY at %i, use fixed one\n",
- 			 bp->phy_addr);
-@@ -2473,6 +2541,7 @@ static void b44_remove_one(struct ssb_de
- 	unregister_netdev(dev);
- 	if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- 		b44_unregister_phy_one(bp);
-+	b44_unregister_adm_switch(bp);
- 	ssb_device_disable(sdev, 0);
- 	ssb_bus_may_powerdown(sdev->bus);
- 	netif_napi_del(&bp->napi);
---- a/drivers/net/ethernet/broadcom/b44.h
-+++ b/drivers/net/ethernet/broadcom/b44.h
-@@ -408,6 +408,9 @@ struct b44 {
- 	struct mii_bus		*mii_bus;
- 	int			old_link;
- 	struct mii_if_info	mii_if;
-+
-+	/* platform device for associated switch */
-+	struct platform_device *adm_switch;
- };
- 
- #endif /* _B44_H */
diff --git a/target/linux/bcm47xx/patches-5.10/210-b44_phy_fix.patch b/target/linux/bcm47xx/patches-5.10/210-b44_phy_fix.patch
deleted file mode 100644
index bedebc415e73..000000000000
--- a/target/linux/bcm47xx/patches-5.10/210-b44_phy_fix.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -429,10 +429,34 @@ static void b44_wap54g10_workaround(stru
- error:
- 	pr_warn("PHY: cannot reset MII transceiver isolate bit\n");
- }
-+
-+static void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+	char buf[20];
-+	struct ssb_device *sdev = bp->sdev;
-+
-+	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
-+	if (sdev->bus->sprom.board_num == 100) {
-+		bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+	} else {
-+		/* WL-HDD */
-+		if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
-+		    !strncmp(buf, "WL300-", strlen("WL300-"))) {
-+			if (sdev->bus->sprom.et0phyaddr == 0 &&
-+			    sdev->bus->sprom.et1phyaddr == 1)
-+				bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+		}
-+	}
-+	return;
-+}
- #else
- static inline void b44_wap54g10_workaround(struct b44 *bp)
- {
- }
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+}
- #endif
- 
- static int b44_setup_phy(struct b44 *bp)
-@@ -441,6 +465,7 @@ static int b44_setup_phy(struct b44 *bp)
- 	int err;
- 
- 	b44_wap54g10_workaround(bp);
-+	b44_bcm47xx_workarounds(bp);
- 
- 	if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- 		return 0;
-@@ -2173,6 +2198,8 @@ static int b44_get_invariants(struct b44
- 	 * valid PHY address. */
- 	bp->phy_addr &= 0x1F;
- 
-+	b44_bcm47xx_workarounds(bp);
-+
- 	memcpy(bp->dev->dev_addr, addr, ETH_ALEN);
- 
- 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
diff --git a/target/linux/bcm47xx/patches-5.10/280-activate_ssb_support_in_usb.patch b/target/linux/bcm47xx/patches-5.10/280-activate_ssb_support_in_usb.patch
deleted file mode 100644
index f6e9e6d30a62..000000000000
--- a/target/linux/bcm47xx/patches-5.10/280-activate_ssb_support_in_usb.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-This prevents the options from being delete with make kernel_oldconfig.
----
- drivers/ssb/Kconfig |    2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -36,6 +36,7 @@ config BCMA_HOST_PCI
- config BCMA_HOST_SOC
- 	bool "Support for BCMA in a SoC"
- 	depends on HAS_IOMEM
-+	select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
- 	help
- 	  Host interface for a Broadcom AIX bus directly mapped into
- 	  the memory. This only works with the Broadcom SoCs from the
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -141,6 +141,7 @@ config SSB_SFLASH
- config SSB_EMBEDDED
- 	bool
- 	depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
-+	select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
- 	default y
- 
- config SSB_DRIVER_EXTIF
diff --git a/target/linux/bcm47xx/patches-5.10/300-fork_cacheflush.patch b/target/linux/bcm47xx/patches-5.10/300-fork_cacheflush.patch
deleted file mode 100644
index daa2c1adf05c..000000000000
--- a/target/linux/bcm47xx/patches-5.10/300-fork_cacheflush.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Wolfram Joost <dbox2@frokaschwei.de>
-Subject: [PATCH] fork_cacheflush
-
-On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
-seem to be caused by a kernel. They can be avoided by:
-1) Disabling highpage
-2) Using flush_cache_mm in flush_cache_dup_mm
-
-For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
----
---- a/arch/mips/include/asm/cacheflush.h
-+++ b/arch/mips/include/asm/cacheflush.h
-@@ -46,7 +46,7 @@
- extern void (*flush_cache_all)(void);
- extern void (*__flush_cache_all)(void);
- extern void (*flush_cache_mm)(struct mm_struct *mm);
--#define flush_cache_dup_mm(mm)	do { (void) (mm); } while (0)
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
- extern void (*flush_cache_range)(struct vm_area_struct *vma,
- 	unsigned long start, unsigned long end);
- extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
diff --git a/target/linux/bcm47xx/patches-5.10/310-no_highpage.patch b/target/linux/bcm47xx/patches-5.10/310-no_highpage.patch
deleted file mode 100644
index b1dcdf9cb2ba..000000000000
--- a/target/linux/bcm47xx/patches-5.10/310-no_highpage.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Jeff Hansen <jhansen@cardaccess-inc.com>
-Subject: [PATCH] no highpage
-
-On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
-seem to be caused by a kernel. They can be avoided by:
-1) Disabling highpage
-2) Using flush_cache_mm in flush_cache_dup_mm
-
-For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
----
---- a/arch/mips/include/asm/page.h
-+++ b/arch/mips/include/asm/page.h
-@@ -71,6 +71,7 @@ static inline unsigned int page_size_ftl
- #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
- 
- #include <linux/pfn.h>
-+#include <asm/cpu-features.h>
- 
- extern void build_clear_page(void);
- extern void build_copy_page(void);
-@@ -110,11 +111,16 @@ static inline void clear_user_page(void
- 		flush_data_cache_page((unsigned long)addr);
- }
- 
--struct vm_area_struct;
--extern void copy_user_highpage(struct page *to, struct page *from,
--	unsigned long vaddr, struct vm_area_struct *vma);
-+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-+	struct page *to)
-+{
-+	extern void (*flush_data_cache_page)(unsigned long addr);
- 
--#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-+	copy_page(vto, vfrom);
-+	if (!cpu_has_ic_fills_f_dc ||
-+	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-+		flush_data_cache_page((unsigned long)vto);
-+}
- 
- /*
-  * These are used to make use of C type-checking..
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -167,30 +167,6 @@ void kunmap_coherent(void)
- 	preempt_enable();
- }
- 
--void copy_user_highpage(struct page *to, struct page *from,
--	unsigned long vaddr, struct vm_area_struct *vma)
--{
--	void *vfrom, *vto;
--
--	vto = kmap_atomic(to);
--	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
--	    page_mapcount(from) && !Page_dcache_dirty(from)) {
--		vfrom = kmap_coherent(from, vaddr);
--		copy_page(vto, vfrom);
--		kunmap_coherent();
--	} else {
--		vfrom = kmap_atomic(from);
--		copy_page(vto, vfrom);
--		kunmap_atomic(vfrom);
--	}
--	if ((!cpu_has_ic_fills_f_dc) ||
--	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
--		flush_data_cache_page((unsigned long)vto);
--	kunmap_atomic(vto);
--	/* Make sure this page is cleared on other CPU's too before using it */
--	smp_wmb();
--}
--
- void copy_to_user_page(struct vm_area_struct *vma,
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
diff --git a/target/linux/bcm47xx/patches-5.10/400-mtd-bcm47xxpart-get-nvram.patch b/target/linux/bcm47xx/patches-5.10/400-mtd-bcm47xxpart-get-nvram.patch
deleted file mode 100644
index 17abe89d1d43..000000000000
--- a/target/linux/bcm47xx/patches-5.10/400-mtd-bcm47xxpart-get-nvram.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/mtd/parsers/bcm47xxpart.c
-+++ b/drivers/mtd/parsers/bcm47xxpart.c
-@@ -98,6 +98,7 @@ static int bcm47xxpart_parse(struct mtd_
- 	int trx_num = 0; /* Number of found TRX partitions */
- 	int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
- 	int err;
-+	bool found_nvram = false;
- 
- 	/*
- 	 * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
-@@ -279,12 +280,23 @@ static int bcm47xxpart_parse(struct mtd_
- 		if (buf[0] == NVRAM_HEADER) {
- 			bcm47xxpart_add_part(&parts[curr_part++], "nvram",
- 					     master->size - blocksize, 0);
-+			found_nvram = true;
- 			break;
- 		}
- 	}
- 
- 	kfree(buf);
- 
-+	if (!found_nvram) {
-+		pr_err("can not find a nvram partition reserve last block\n");
-+		bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
-+				     master->size - blocksize * 2, MTD_WRITEABLE);
-+		for (i = 0; i < curr_part; i++) {
-+			if (parts[i].size + parts[i].offset == master->size)
-+				parts[i].offset -= blocksize * 2;
-+		}
-+	}
-+
- 	/*
- 	 * Assume that partitions end at the beginning of the one they are
- 	 * followed by.
diff --git a/target/linux/bcm47xx/patches-5.10/610-pci_ide_fix.patch b/target/linux/bcm47xx/patches-5.10/610-pci_ide_fix.patch
deleted file mode 100644
index 520828e8e552..000000000000
--- a/target/linux/bcm47xx/patches-5.10/610-pci_ide_fix.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: b.sander
-Subject: [PATCH] pci: IDE fix
-
-These are standard probing messages when using pdc202xx_old:
-pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02)
-PCI: Enabling device 0000:00:01.0 (0004 -> 0007)
-PCI: Fixing up device 0000:00:01.0
-0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
-0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE
-pdc202xx_old 0000:00:01.0: 100% native mode on irq 6
-
-With the default MAX_HWIFS value after above we get:
-    ide2: BM-DMA at 0x0400-0x0407
-    ide3: BM-DMA at 0x0408-0x040f
-Probing IDE interface ide2...
-hde: CF500, CFA DISK drive
-
-As you can see it's ide2 + ide3 and hde.
-
-With this patch applied we get:
-    ide0: BM-DMA at 0x0400-0x0407
-    ide1: BM-DMA at 0x0408-0x040f
-Probing IDE interface ide0...
-hda: CF500, CFA DISK drive
-
-This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061
----
---- a/include/linux/ide.h
-+++ b/include/linux/ide.h
-@@ -236,7 +236,11 @@ static inline void ide_std_init_ports(st
- 	hw->io_ports.ctl_addr = ctl_addr;
- }
- 
-+#if defined CONFIG_BCM47XX
-+# define MAX_HWIFS	2
-+#else
- #define MAX_HWIFS	10
-+#endif
- 
- /*
-  * Now for the data we need to maintain per-drive:  ide_drive_t
diff --git a/target/linux/bcm47xx/patches-5.10/700-net-bgmac-connect-to-PHY-even-if-it-is-BGMAC_PHY_NOR.patch b/target/linux/bcm47xx/patches-5.10/700-net-bgmac-connect-to-PHY-even-if-it-is-BGMAC_PHY_NOR.patch
deleted file mode 100644
index 2fcfbb74383b..000000000000
--- a/target/linux/bcm47xx/patches-5.10/700-net-bgmac-connect-to-PHY-even-if-it-is-BGMAC_PHY_NOR.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 7 Nov 2021 14:20:40 +0100
-Subject: [PATCH] net: bgmac: connect to PHY even if it is BGMAC_PHY_NOREGS
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Recent bgmac change was meant to just fix a race between "Generic PHY"
-and "bcm53xx" drivers after -EPROBE_DEFER. It modified bgmac to use
-phy_connect() only if there is a real PHY device connected.
-
-That change broke bgmac on bcm47xx. bcma_phy_connect() now registers a
-fixed PHY with the bgmac_phy_connect_direct(). That fails as another
-fixed PHY (also using address 0) is already registered - by bcm47xx arch
-code bcm47xx_register_bus_complete().
-
-This change brings origial behaviour. It connects Ethernet interface
-with pseudo-PHY (switch device) and adjusts Ethernet interface link to
-match connected switch.
-
-This fixes:
-[    2.548098] bgmac_bcma bcma0:1: Failed to register fixed PHY device
-[    2.554584] bgmac_bcma bcma0:1: Cannot connect to phy
-
-Fixes: b5375509184d ("net: bgmac: improve handling PHY")
-Link: https://lore.kernel.org/netdev/3639116e-9292-03ca-b9d9-d741118a4541@gmail.com/T/#u
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/net/ethernet/broadcom/bgmac-bcma.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -94,7 +94,7 @@ static int bcma_phy_connect(struct bgmac
- 		return 0;
- 
- 	/* Connect to the PHY */
--	if (bgmac->mii_bus && bgmac->phyaddr != BGMAC_PHY_NOREGS) {
-+	if (bgmac->mii_bus) {
- 		snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, bgmac->mii_bus->id,
- 			 bgmac->phyaddr);
- 		phy_dev = phy_connect(bgmac->net_dev, bus_id, bgmac_adjust_link,
diff --git a/target/linux/bcm47xx/patches-5.10/701-net-bgmac-connect-to-PHY-even-if-it-is-BGMAC_PHY_NOR.patch b/target/linux/bcm47xx/patches-5.10/701-net-bgmac-connect-to-PHY-even-if-it-is-BGMAC_PHY_NOR.patch
deleted file mode 100644
index 2c2eb07b82da..000000000000
--- a/target/linux/bcm47xx/patches-5.10/701-net-bgmac-connect-to-PHY-even-if-it-is-BGMAC_PHY_NOR.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 10 Jun 2022 13:10:47 +0200
-Subject: [PATCH] bgmac: reduce max frame size to support just MTU 1500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-bgmac allocates new replacement buffer before handling each received
-frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU
-time. Ideally bgmac should just respect currently set MTU but it isn't
-the case right now. For now just revert back to the old limited frame
-size.
-
-This change bumps NAT masquarade speed by ~95%.
-
-Ref: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/net/ethernet/broadcom/bgmac.h | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -366,8 +366,7 @@
- #define BGMAC_RX_FRAME_OFFSET			30		/* There are 2 unused bytes between header and real data */
- #define BGMAC_RX_BUF_OFFSET			(NET_SKB_PAD + NET_IP_ALIGN - \
- 						 BGMAC_RX_FRAME_OFFSET)
--/* Jumbo frame size with FCS */
--#define BGMAC_RX_MAX_FRAME_SIZE			9724
-+#define BGMAC_RX_MAX_FRAME_SIZE			1536
- #define BGMAC_RX_BUF_SIZE			(BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
- #define BGMAC_RX_ALLOC_SIZE			(SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE + BGMAC_RX_BUF_OFFSET) + \
- 						 SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
diff --git a/target/linux/bcm47xx/patches-5.10/791-tg3-no-pci-sleep.patch b/target/linux/bcm47xx/patches-5.10/791-tg3-no-pci-sleep.patch
deleted file mode 100644
index 50edfc3b4117..000000000000
--- a/target/linux/bcm47xx/patches-5.10/791-tg3-no-pci-sleep.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-When the Ethernet controller is powered down and someone wants to 
-access the mdio bus like the witch driver (b53) the system crashed if 
-PCI_D3hot was set before. This patch deactivates this power sawing mode 
-when a switch driver is in use.
-
---- a/drivers/net/ethernet/broadcom/tg3.c
-+++ b/drivers/net/ethernet/broadcom/tg3.c
-@@ -4273,7 +4273,8 @@ static int tg3_power_down_prepare(struct
- static void tg3_power_down(struct tg3 *tp)
- {
- 	pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
--	pci_set_power_state(tp->pdev, PCI_D3hot);
-+	if (!tg3_flag(tp, ROBOSWITCH))
-+		pci_set_power_state(tp->pdev, PCI_D3hot);
- }
- 
- static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u32 *speed, u8 *duplex)
diff --git a/target/linux/bcm47xx/patches-5.10/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch b/target/linux/bcm47xx/patches-5.10/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch
deleted file mode 100644
index 318dc55810c6..000000000000
--- a/target/linux/bcm47xx/patches-5.10/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 597715c61ae75a05ab3310a34ff3857a006f0f63 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 20 Nov 2014 21:32:42 +0100
-Subject: [PATCH] bcma: add table of serial flashes with smaller blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/bcma/driver_chipcommon_sflash.c | 29 +++++++++++++++++++++++++++++
- 1 file changed, 29 insertions(+)
-
---- a/drivers/bcma/driver_chipcommon_sflash.c
-+++ b/drivers/bcma/driver_chipcommon_sflash.c
-@@ -9,6 +9,7 @@
- 
- #include <linux/platform_device.h>
- #include <linux/bcma/bcma.h>
-+#include <bcm47xx_board.h>
- 
- static struct resource bcma_sflash_resource = {
- 	.name	= "bcma_sflash",
-@@ -42,6 +43,13 @@ static const struct bcma_sflash_tbl_e bc
- 	{ NULL },
- };
- 
-+/* Some devices use smaller blocks (and have more of them) */
-+static const struct bcma_sflash_tbl_e bcma_sflash_st_shrink_tbl[] = {
-+	{ "M25P16", 0x14, 0x1000, 512, },
-+	{ "M25P32", 0x15, 0x1000, 1024, },
-+	{ NULL },
-+};
-+
- static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
- 	{ "SST25WF512", 1, 0x1000, 16, },
- 	{ "SST25VF512", 0x48, 0x1000, 16, },
-@@ -85,6 +93,24 @@ static void bcma_sflash_cmd(struct bcma_
- 	bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
- }
- 
-+const struct bcma_sflash_tbl_e *bcma_sflash_shrink_flash(u32 id)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+	const struct bcma_sflash_tbl_e *e;
-+
-+	switch (board) {
-+	case BCM47XX_BOARD_NETGEAR_WGR614_V10:
-+	case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
-+		for (e = bcma_sflash_st_shrink_tbl; e->name; e++) {
-+			if (e->id == id)
-+				return e;
-+		}
-+		return NULL;
-+	default:
-+		return NULL;
-+	}
-+}
-+
- /* Initialize serial flash access */
- int bcma_sflash_init(struct bcma_drv_cc *cc)
- {
-@@ -115,6 +141,10 @@ int bcma_sflash_init(struct bcma_drv_cc
- 		case 0x13:
- 			return -ENOTSUPP;
- 		default:
-+			e = bcma_sflash_shrink_flash(id);
-+			if (e)
-+				break;
-+
- 			for (e = bcma_sflash_st_tbl; e->name; e++) {
- 				if (e->id == id)
- 					break;
diff --git a/target/linux/bcm47xx/patches-5.10/820-wgt634u-nvram-fix.patch b/target/linux/bcm47xx/patches-5.10/820-wgt634u-nvram-fix.patch
deleted file mode 100644
index bfcfae885fb4..000000000000
--- a/target/linux/bcm47xx/patches-5.10/820-wgt634u-nvram-fix.patch
+++ /dev/null
@@ -1,296 +0,0 @@
-The Netgear wgt634u uses a different format for storing the 
-configuration. This patch is needed to read out the correct 
-configuration. The cfe_env.c file uses a different method way to read 
-out the configuration than the in kernel cfe config reader.
-
---- a/drivers/firmware/broadcom/Makefile
-+++ b/drivers/firmware/broadcom/Makefile
-@@ -1,4 +1,4 @@
- # SPDX-License-Identifier: GPL-2.0-only
--obj-$(CONFIG_BCM47XX_NVRAM)		+= bcm47xx_nvram.o
-+obj-$(CONFIG_BCM47XX_NVRAM)		+= bcm47xx_nvram.o cfe_env.o
- obj-$(CONFIG_BCM47XX_SPROM)		+= bcm47xx_sprom.o
- obj-$(CONFIG_TEE_BNXT_FW)		+= tee_bnxt_fw.o
---- /dev/null
-+++ b/drivers/firmware/broadcom/cfe_env.c
-@@ -0,0 +1,228 @@
-+/*
-+ * CFE environment variable access
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * Copyright 2006, Felix Fietkau <nbd@nbd.name>
-+ * 
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/io.h>
-+#include <linux/uaccess.h>
-+
-+#define NVRAM_SIZE       (0x1ff0)
-+static char _nvdata[NVRAM_SIZE];
-+static char _valuestr[256];
-+
-+/*
-+ * TLV types.  These codes are used in the "type-length-value"
-+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
-+ *
-+ * The layout of the flash/nvram is as follows:
-+ *
-+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
-+ *
-+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
-+ * The "length" field marks the length of the data section, not
-+ * including the type and length fields.
-+ *
-+ * Environment variables are stored as follows:
-+ *
-+ * <type_env> <length> <flags> <name> = <value>
-+ *
-+ * If bit 0 (low bit) is set, the length is an 8-bit value.
-+ * If bit 0 (low bit) is clear, the length is a 16-bit value
-+ * 
-+ * Bit 7 set indicates "user" TLVs.  In this case, bit 0 still
-+ * indicates the size of the length field.  
-+ *
-+ * Flags are from the constants below:
-+ *
-+ */
-+#define ENV_LENGTH_16BITS	0x00	/* for low bit */
-+#define ENV_LENGTH_8BITS	0x01
-+
-+#define ENV_TYPE_USER		0x80
-+
-+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-+
-+/*
-+ * The actual TLV types we support
-+ */
-+
-+#define ENV_TLV_TYPE_END	0x00	
-+#define ENV_TLV_TYPE_ENV	ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-+
-+/*
-+ * Environment variable flags 
-+ */
-+
-+#define ENV_FLG_NORMAL		0x00	/* normal read/write */
-+#define ENV_FLG_BUILTIN		0x01	/* builtin - not stored in flash */
-+#define ENV_FLG_READONLY	0x02	/* read-only - cannot be changed */
-+
-+#define ENV_FLG_MASK		0xFF	/* mask of attributes we keep */
-+#define ENV_FLG_ADMIN		0x100	/* lets us internally override permissions */
-+
-+
-+/*  *********************************************************************
-+    *  _nvram_read(buffer,offset,length)
-+    *  
-+    *  Read data from the NVRAM device
-+    *  
-+    *  Input parameters: 
-+    *  	   buffer - destination buffer
-+    *  	   offset - offset of data to read
-+    *  	   length - number of bytes to read
-+    *  	   
-+    *  Return value:
-+    *  	   number of bytes read, or <0 if error occured
-+    ********************************************************************* */
-+static int
-+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-+{
-+    int i;
-+    if (offset > NVRAM_SIZE)
-+	return -1; 
-+
-+    for ( i = 0; i < length; i++) {
-+	buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-+    }
-+    return length;
-+}
-+
-+
-+static char*
-+_strnchr(const char *dest,int c,size_t cnt)
-+{
-+	while (*dest && (cnt > 0)) {
-+	if (*dest == c) return (char *) dest;
-+	dest++;
-+	cnt--;
-+	}
-+	return NULL;
-+}
-+
-+
-+
-+/*
-+ * Core support API: Externally visible.
-+ */
-+
-+/*
-+ * Get the value of an NVRAM variable
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NULL if undefined
-+ */
-+
-+char *cfe_env_get(unsigned char *nv_buf, const char *name)
-+{
-+    int size;
-+    unsigned char *buffer;
-+    unsigned char *ptr;
-+    unsigned char *envval;
-+    unsigned int reclen;
-+    unsigned int rectype;
-+    int offset;
-+    int flg;
-+    
-+	if (!strcmp(name, "nvram_type"))
-+		return "cfe";
-+	
-+    size = NVRAM_SIZE;
-+    buffer = &_nvdata[0];
-+
-+    ptr = buffer;
-+    offset = 0;
-+
-+    /* Read the record type and length */
-+    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+	goto error;
-+    }
-+    
-+    while ((*ptr != ENV_TLV_TYPE_END)  && (size > 1)) {
-+
-+	/* Adjust pointer for TLV type */
-+	rectype = *(ptr);
-+	offset++;
-+	size--;
-+
-+	/* 
-+	 * Read the length.  It can be either 1 or 2 bytes
-+	 * depending on the code 
-+	 */
-+	if (rectype & ENV_LENGTH_8BITS) {
-+	    /* Read the record type and length - 8 bits */
-+	    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+		goto error;
-+	    }
-+	    reclen = *(ptr);
-+	    size--;
-+	    offset++;
-+	}
-+	else {
-+	    /* Read the record type and length - 16 bits, MSB first */
-+	    if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-+		goto error;
-+	    }
-+	    reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-+	    size -= 2;
-+	    offset += 2;
-+	}
-+
-+	if (reclen > size)
-+	    break;	/* should not happen, bad NVRAM */
-+
-+	switch (rectype) {
-+	    case ENV_TLV_TYPE_ENV:
-+		/* Read the TLV data */
-+		if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-+		    goto error;
-+		flg = *ptr++;
-+		envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-+		if (envval) {
-+		    *envval++ = '\0';
-+		    memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-+		    _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-+#if 0			
-+		    printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-+#endif
-+		    if(!strcmp(ptr, name)){
-+			return _valuestr;
-+		    }
-+		    if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-+			return _valuestr;
-+		}
-+		break;
-+		
-+	    default: 
-+		/* Unknown TLV type, skip it. */
-+		break;
-+	    }
-+
-+	/*
-+	 * Advance to next TLV 
-+	 */
-+		
-+	size -= (int)reclen;
-+	offset += reclen;
-+
-+	/* Read the next record type */
-+	ptr = buffer;
-+	if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-+	    goto error;
-+	}
-+
-+error:
-+    return NULL;
-+
-+}
-+
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -33,6 +33,8 @@ struct nvram_header {
- static char nvram_buf[NVRAM_SPACE];
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
-+static int cfe_env;
-+extern char *cfe_env_get(char *nv_buf, const char *name);
- 
- /**
-  * bcm47xx_nvram_is_valid - check for a valid NVRAM at specified memory
-@@ -80,6 +82,26 @@ static int bcm47xx_nvram_find_and_copy(v
- 		return -EEXIST;
- 	}
- 
-+	cfe_env = 0;
-+
-+	/* XXX: hack for supporting the CFE environment stuff on WGT634U */
-+	if (res_size >= 8 * 1024 * 1024) {
-+		u32 *src = (u32 *)(flash_start + 8 * 1024 * 1024 - 0x2000);
-+		u32 *dst = (u32 *)nvram_buf;
-+
-+		if ((*src & 0xff00ff) == 0x000001) {
-+			printk("early_nvram_init: WGT634U NVRAM found.\n");
-+
-+			for (i = 0; i < 0x1ff0; i++) {
-+				if (*src == 0xFFFFFFFF)
-+					break;
-+				*dst++ = *src++;
-+			}
-+			cfe_env = 1;
-+			return 0;
-+		}
-+	}
-+
- 	/* TODO: when nvram is on nand flash check for bad blocks first. */
- 
- 	/* Try every possible flash size and check for NVRAM at its end */
-@@ -172,6 +194,13 @@ int bcm47xx_nvram_getenv(const char *nam
- 	if (!name)
- 		return -EINVAL;
- 
-+	if (cfe_env) {
-+		value = cfe_env_get(nvram_buf, name);
-+		if (!value)
-+			return -ENOENT;
-+		return snprintf(val, val_len, "%s", value);
-+	}
-+
- 	if (!nvram_len) {
- 		err = nvram_init();
- 		if (err)
diff --git a/target/linux/bcm47xx/patches-5.10/830-huawei_e970_support.patch b/target/linux/bcm47xx/patches-5.10/830-huawei_e970_support.patch
deleted file mode 100644
index 1746fee592cc..000000000000
--- a/target/linux/bcm47xx/patches-5.10/830-huawei_e970_support.patch
+++ /dev/null
@@ -1,101 +0,0 @@
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -37,6 +37,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
-+#include <linux/old_gpio_wdt.h>
- #include <asm/bootinfo.h>
- #include <asm/idle.h>
- #include <asm/prom.h>
-@@ -254,6 +255,33 @@ static struct fixed_phy_status bcm47xx_f
- 	.duplex	= DUPLEX_FULL,
- };
- 
-+static struct gpio_wdt_platform_data gpio_wdt_data;
-+
-+static struct platform_device gpio_wdt_device = {
-+	.name			= "gpio-wdt",
-+	.id			= 0,
-+	.dev			= {
-+		.platform_data	= &gpio_wdt_data,
-+	},
-+};
-+
-+static int __init bcm47xx_register_gpio_watchdog(void)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+
-+	switch (board) {
-+	case BCM47XX_BOARD_HUAWEI_E970:
-+		pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n");
-+		gpio_wdt_data.gpio = 7;
-+		gpio_wdt_data.interval = HZ;
-+		gpio_wdt_data.first_interval = HZ / 5;
-+		return platform_device_register(&gpio_wdt_device);
-+	default:
-+		/* Nothing to do */
-+		return 0;
-+	}
-+}
-+
- static int __init bcm47xx_register_bus_complete(void)
- {
- 	switch (bcm47xx_bus_type) {
-@@ -275,6 +303,7 @@ static int __init bcm47xx_register_bus_c
- 	bcm47xx_workarounds();
- 
- 	fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
-+	bcm47xx_register_gpio_watchdog();
- 	return 0;
- }
- device_initcall(bcm47xx_register_bus_complete);
---- a/arch/mips/configs/bcm47xx_defconfig
-+++ b/arch/mips/configs/bcm47xx_defconfig
-@@ -63,6 +63,7 @@ CONFIG_HW_RANDOM=y
- CONFIG_GPIO_SYSFS=y
- CONFIG_WATCHDOG=y
- CONFIG_BCM47XX_WDT=y
-+CONFIG_GPIO_WDT=y
- CONFIG_SSB_DRIVER_GIGE=y
- CONFIG_BCMA_DRIVER_GMAC_CMN=y
- CONFIG_USB=y
---- a/drivers/ssb/embedded.c
-+++ b/drivers/ssb/embedded.c
-@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu
- }
- EXPORT_SYMBOL(ssb_watchdog_timer_set);
- 
-+#ifdef CONFIG_BCM47XX
-+#include <bcm47xx_board.h>
-+
-+static bool ssb_watchdog_supported(void)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+
-+	/* The Huawei E970 has a hardware watchdog using a GPIO */
-+	switch (board) {
-+	case BCM47XX_BOARD_HUAWEI_E970:
-+		return false;
-+	default:
-+		return true;
-+	}
-+}
-+#else
-+static bool ssb_watchdog_supported(void)
-+{
-+	return true;
-+}
-+#endif
-+
- int ssb_watchdog_register(struct ssb_bus *bus)
- {
- 	struct bcm47xx_wdt wdt = {};
- 	struct platform_device *pdev;
- 
-+	if (!ssb_watchdog_supported())
-+		return 0;
-+
- 	if (ssb_chipco_available(&bus->chipco)) {
- 		wdt.driver_data = &bus->chipco;
- 		wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;
diff --git a/target/linux/bcm47xx/patches-5.10/831-old_gpio_wdt.patch b/target/linux/bcm47xx/patches-5.10/831-old_gpio_wdt.patch
deleted file mode 100644
index f6fb7f185582..000000000000
--- a/target/linux/bcm47xx/patches-5.10/831-old_gpio_wdt.patch
+++ /dev/null
@@ -1,360 +0,0 @@
-This generic GPIO watchdog is used on Huawei E970 (bcm47xx)
-
-Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1698,6 +1698,15 @@ config WDT_MTX1
- 	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
- 	  will reboot the machine after a 100 seconds timer expired.
- 
-+config GPIO_WDT
-+	tristate "GPIO Hardware Watchdog"
-+ 	help
-+	  Hardware driver for GPIO-controlled watchdogs. GPIO pin and
-+	  toggle interval settings are platform-specific. The driver
-+	  will stop toggling the GPIO (i.e. machine reboots) after a
-+	  100 second timer expired and no process has written to
-+	  /dev/watchdog during that time.
-+
- config PNX833X_WDT
- 	tristate "PNX833x Hardware Watchdog"
- 	depends on SOC_PNX8335
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -161,6 +161,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
-+obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
---- /dev/null
-+++ b/drivers/watchdog/old_gpio_wdt.c
-@@ -0,0 +1,301 @@
-+/*
-+ *      Driver for GPIO-controlled Hardware Watchdogs.
-+ *
-+ *      Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ *      Replaces mtx1_wdt (driver for the MTX-1 Watchdog):
-+ *
-+ *      (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
-+ *                              All Rights Reserved.
-+ *                              http://www.4g-systems.biz
-+ *
-+ *      (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ *      Neither Michael Stickel nor 4G Systems admit liability nor provide
-+ *      warranty for any of this software. This material is provided
-+ *      "AS-IS" and at no charge.
-+ *
-+ *      (c) Copyright 2005    4G Systems <info@4g-systems.biz>
-+ *
-+ *      Release 0.01.
-+ *      Author: Michael Stickel  michael.stickel@4g-systems.biz
-+ *
-+ *      Release 0.02.
-+ *      Author: Florian Fainelli florian@openwrt.org
-+ *              use the Linux watchdog/timer APIs
-+ *
-+ *      Release 0.03.
-+ *      Author: Mathias Adam <m.adam--linux@adamis.de>
-+ *              make it a generic gpio watchdog driver
-+ *
-+ *      The Watchdog is configured to reset the MTX-1
-+ *      if it is not triggered for 100 seconds.
-+ *      It should not be triggered more often than 1.6 seconds.
-+ *
-+ *      A timer triggers the watchdog every 5 seconds, until
-+ *      it is opened for the first time. After the first open
-+ *      it MUST be triggered every 2..95 seconds.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/timer.h>
-+#include <linux/completion.h>
-+#include <linux/jiffies.h>
-+#include <linux/watchdog.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/uaccess.h>
-+#include <linux/gpio.h>
-+#include <linux/old_gpio_wdt.h>
-+
-+static int ticks = 100 * HZ;
-+
-+static struct {
-+	struct completion stop;
-+	spinlock_t lock;
-+	int running;
-+	struct timer_list timer;
-+	int queue;
-+	int default_ticks;
-+	unsigned long inuse;
-+	unsigned gpio;
-+	unsigned int gstate;
-+	int interval;
-+	int first_interval;
-+} gpio_wdt_device;
-+
-+static void gpio_wdt_trigger(struct timer_list *unused)
-+{
-+	spin_lock(&gpio_wdt_device.lock);
-+	if (gpio_wdt_device.running && ticks > 0)
-+		ticks -= gpio_wdt_device.interval;
-+
-+	/* toggle wdt gpio */
-+	gpio_wdt_device.gstate = !gpio_wdt_device.gstate;
-+	gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate);
-+
-+	if (gpio_wdt_device.queue && ticks > 0)
-+		mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval);
-+	else
-+		complete(&gpio_wdt_device.stop);
-+	spin_unlock(&gpio_wdt_device.lock);
-+}
-+
-+static void gpio_wdt_reset(void)
-+{
-+	ticks = gpio_wdt_device.default_ticks;
-+}
-+
-+
-+static void gpio_wdt_start(void)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+	if (!gpio_wdt_device.queue) {
-+		gpio_wdt_device.queue = 1;
-+		gpio_wdt_device.gstate = 1;
-+		gpio_set_value(gpio_wdt_device.gpio, 1);
-+		mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval);
-+	}
-+	gpio_wdt_device.running++;
-+	spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+}
-+
-+static int gpio_wdt_stop(void)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+	if (gpio_wdt_device.queue) {
-+		gpio_wdt_device.queue = 0;
-+		gpio_wdt_device.gstate = 0;
-+		gpio_set_value(gpio_wdt_device.gpio, 0);
-+	}
-+	ticks = gpio_wdt_device.default_ticks;
-+	spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+	return 0;
-+}
-+
-+/* Filesystem functions */
-+
-+static int gpio_wdt_open(struct inode *inode, struct file *file)
-+{
-+	if (test_and_set_bit(0, &gpio_wdt_device.inuse))
-+		return -EBUSY;
-+	return nonseekable_open(inode, file);
-+}
-+
-+
-+static int gpio_wdt_release(struct inode *inode, struct file *file)
-+{
-+	clear_bit(0, &gpio_wdt_device.inuse);
-+	return 0;
-+}
-+
-+static long gpio_wdt_ioctl(struct file *file, unsigned int cmd,
-+							unsigned long arg)
-+{
-+	void __user *argp = (void __user *)arg;
-+	int __user *p = (int __user *)argp;
-+	unsigned int value;
-+	static const struct watchdog_info ident = {
-+		.options = WDIOF_CARDRESET,
-+		.identity = "GPIO WDT",
-+	};
-+
-+	switch (cmd) {
-+	case WDIOC_GETSUPPORT:
-+		if (copy_to_user(argp, &ident, sizeof(ident)))
-+			return -EFAULT;
-+		break;
-+	case WDIOC_GETSTATUS:
-+	case WDIOC_GETBOOTSTATUS:
-+		put_user(0, p);
-+		break;
-+	case WDIOC_SETOPTIONS:
-+		if (get_user(value, p))
-+			return -EFAULT;
-+		if (value & WDIOS_ENABLECARD)
-+			gpio_wdt_start();
-+		else if (value & WDIOS_DISABLECARD)
-+			gpio_wdt_stop();
-+		else
-+			return -EINVAL;
-+		return 0;
-+	case WDIOC_KEEPALIVE:
-+		gpio_wdt_reset();
-+		break;
-+	default:
-+		return -ENOTTY;
-+	}
-+	return 0;
-+}
-+
-+
-+static ssize_t gpio_wdt_write(struct file *file, const char *buf,
-+						size_t count, loff_t *ppos)
-+{
-+	if (!count)
-+		return -EIO;
-+	gpio_wdt_reset();
-+	return count;
-+}
-+
-+static const struct file_operations gpio_wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.unlocked_ioctl	= gpio_wdt_ioctl,
-+	.open		= gpio_wdt_open,
-+	.write		= gpio_wdt_write,
-+	.release	= gpio_wdt_release,
-+};
-+
-+
-+static struct miscdevice gpio_wdt_misc = {
-+	.minor	= WATCHDOG_MINOR,
-+	.name	= "watchdog",
-+	.fops	= &gpio_wdt_fops,
-+};
-+
-+
-+static int gpio_wdt_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+	struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data;
-+
-+	gpio_wdt_device.gpio = gpio_wdt_data->gpio;
-+	gpio_wdt_device.interval = gpio_wdt_data->interval;
-+	gpio_wdt_device.first_interval = gpio_wdt_data->first_interval;
-+	if (gpio_wdt_device.first_interval <= 0) {
-+		gpio_wdt_device.first_interval = gpio_wdt_device.interval;
-+	}
-+
-+	ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt");
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "failed to request gpio");
-+		return ret;
-+	}
-+
-+	spin_lock_init(&gpio_wdt_device.lock);
-+	init_completion(&gpio_wdt_device.stop);
-+	gpio_wdt_device.queue = 0;
-+	clear_bit(0, &gpio_wdt_device.inuse);
-+	timer_setup(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L);
-+	gpio_wdt_device.default_ticks = ticks;
-+
-+	gpio_wdt_start();
-+	dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n",
-+		gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval);
-+	return 0;
-+}
-+
-+static int gpio_wdt_remove(struct platform_device *pdev)
-+{
-+	/* FIXME: do we need to lock this test ? */
-+	if (gpio_wdt_device.queue) {
-+		gpio_wdt_device.queue = 0;
-+		wait_for_completion(&gpio_wdt_device.stop);
-+	}
-+
-+	gpio_free(gpio_wdt_device.gpio);
-+	misc_deregister(&gpio_wdt_misc);
-+	return 0;
-+}
-+
-+static struct platform_driver gpio_wdt_driver = {
-+	.probe = gpio_wdt_probe,
-+	.remove = gpio_wdt_remove,
-+	.driver.name = "gpio-wdt",
-+	.driver.owner = THIS_MODULE,
-+};
-+
-+static int __init gpio_wdt_init(void)
-+{
-+	return platform_driver_register(&gpio_wdt_driver);
-+}
-+arch_initcall(gpio_wdt_init);
-+
-+/*
-+ * We do wdt initialization in two steps: arch_initcall probes the wdt
-+ * very early to start pinging the watchdog (misc devices are not yet
-+ * available), and later module_init() just registers the misc device.
-+ */
-+static int gpio_wdt_init_late(void)
-+{
-+	int ret;
-+
-+	ret = misc_register(&gpio_wdt_misc);
-+	if (ret < 0) {
-+		pr_err("GPIO_WDT: failed to register misc device\n");
-+		return ret;
-+	}
-+	return 0;
-+}
-+#ifndef MODULE
-+module_init(gpio_wdt_init_late);
-+#endif
-+
-+static void __exit gpio_wdt_exit(void)
-+{
-+	platform_driver_unregister(&gpio_wdt_driver);
-+}
-+module_exit(gpio_wdt_exit);
-+
-+MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam");
-+MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS("platform:gpio-wdt");
---- /dev/null
-+++ b/include/linux/old_gpio_wdt.h
-@@ -0,0 +1,21 @@
-+/*
-+ *  Definitions for the GPIO watchdog driver
-+ *
-+ *  Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef _GPIO_WDT_H_
-+#define _GPIO_WDT_H_
-+
-+struct gpio_wdt_platform_data {
-+	int	gpio;		/* GPIO line number */
-+	int	interval;	/* watchdog reset interval in system ticks */
-+	int	first_interval;	/* first wd reset interval in system ticks */
-+};
-+
-+#endif /* _GPIO_WDT_H_ */
diff --git a/target/linux/bcm47xx/patches-5.10/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch b/target/linux/bcm47xx/patches-5.10/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch
deleted file mode 100644
index 6b7ee06e50e8..000000000000
--- a/target/linux/bcm47xx/patches-5.10/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 5c81397a0147ea59c778d1de14ef54e2268221f6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 8 Apr 2015 06:58:11 +0200
-Subject: [PATCH] ssb: reject PCI writes setting CardBus bridge resources
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-If SoC has a CardBus we can set resources of device at slot 1 only. It's
-impossigle to set bridge resources as it simply overwrites device 1
-configuration and usually results in Data bus error-s.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/ssb/driver_pcicore.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -164,6 +164,10 @@ static int ssb_extpci_write_config(struc
- 	WARN_ON(!pc->hostmode);
- 	if (unlikely(len != 1 && len != 2 && len != 4))
- 		goto out;
-+	/* CardBus SoCs allow configuring dev 1 resources only */
-+	if (extpci_core->cardbusmode && dev != 1 &&
-+	    off >= PCI_BASE_ADDRESS_0 && off <= PCI_BASE_ADDRESS_5)
-+		goto out;
- 	addr = get_cfgspace_addr(pc, bus, dev, func, off);
- 	if (unlikely(!addr))
- 		goto out;
diff --git a/target/linux/bcm47xx/patches-5.10/940-bcm47xx-yenta.patch b/target/linux/bcm47xx/patches-5.10/940-bcm47xx-yenta.patch
deleted file mode 100644
index 8847b0c0c752..000000000000
--- a/target/linux/bcm47xx/patches-5.10/940-bcm47xx-yenta.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -932,6 +932,8 @@ static unsigned int yenta_probe_irq(stru
- 	 * Probe for usable interrupts using the force
- 	 * register to generate bogus card status events.
- 	 */
-+#ifndef CONFIG_BCM47XX
-+	/* WRT54G3G does not like this */
- 	cb_writel(socket, CB_SOCKET_EVENT, -1);
- 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- 	reg = exca_readb(socket, I365_CSCINT);
-@@ -947,6 +949,7 @@ static unsigned int yenta_probe_irq(stru
- 	}
- 	cb_writel(socket, CB_SOCKET_MASK, 0);
- 	exca_writeb(socket, I365_CSCINT, reg);
-+#endif
- 
- 	mask = probe_irq_mask(val) & 0xffff;
- 
-@@ -1031,6 +1034,10 @@ static void yenta_get_socket_capabilitie
- 	else
- 		socket->socket.irq_mask = 0;
- 
-+	/* irq mask probing is broken for the WRT54G3G */
-+	if (socket->socket.irq_mask == 0)
-+		socket->socket.irq_mask = 0x6f8;
-+
- 	dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
- 		 socket->socket.irq_mask, socket->cb_irq);
- }
-@@ -1262,6 +1269,15 @@ static int yenta_probe(struct pci_dev *d
- 	dev_info(&dev->dev, "Socket status: %08x\n",
- 		 cb_readl(socket, CB_SOCKET_STATE));
- 
-+	/* Generate an interrupt on card insert/remove */
-+	config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+	/* Set up Multifunction Routing Status Register */
-+	config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+
-+	/* Switch interrupts to parallelized */
-+	config_writeb(socket, 0x92, 0x64);
-+
- 	yenta_fixup_parent_bridge(dev->subordinate);
- 
- 	/* Register it with the pcmcia layer.. */
diff --git a/target/linux/bcm47xx/patches-5.10/976-ssb_increase_pci_delay.patch b/target/linux/bcm47xx/patches-5.10/976-ssb_increase_pci_delay.patch
deleted file mode 100644
index 99aa188374ab..000000000000
--- a/target/linux/bcm47xx/patches-5.10/976-ssb_increase_pci_delay.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -390,7 +390,7 @@ static void ssb_pcicore_init_hostmode(st
- 	set_io_port_base(ssb_pcicore_controller.io_map_base);
- 	/* Give some time to the PCI controller to configure itself with the new
- 	 * values. Not waiting at this point causes crashes of the machine. */
--	mdelay(10);
-+	mdelay(300);
- 	register_pci_controller(&ssb_pcicore_controller);
- }
- 
diff --git a/target/linux/bcm47xx/patches-5.10/999-wl_exports.patch b/target/linux/bcm47xx/patches-5.10/999-wl_exports.patch
deleted file mode 100644
index 48c6a47871fb..000000000000
--- a/target/linux/bcm47xx/patches-5.10/999-wl_exports.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -30,7 +30,8 @@ struct nvram_header {
- 	u32 config_ncdl;	/* ncdl values for memc */
- };
- 
--static char nvram_buf[NVRAM_SPACE];
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
- static int cfe_env;
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -61,6 +61,9 @@ void (*_dma_cache_wback_inv)(unsigned lo
- void (*_dma_cache_wback)(unsigned long start, unsigned long size);
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
-+EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
-+
- #endif /* CONFIG_DMA_NONCOHERENT */
- 
- /*
diff --git a/target/linux/bcm4908/config-5.10 b/target/linux/bcm4908/config-5.10
deleted file mode 100644
index 1564123ca727..000000000000
--- a/target/linux/bcm4908/config-5.10
+++ /dev/null
@@ -1,234 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_BCM4908=y
-CONFIG_ARCH_BCMBCA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_B53=y
-CONFIG_BCM4908_ENET=y
-CONFIG_BCM7038_WDT=y
-CONFIG_BCM7XXX_PHY=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_PMB=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_PM=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="earlycon=bcm63xx_uart,0xff800640 console=ttyS0,115200"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_COMMON_CLK=y
-# CONFIG_COMPAT_32BIT_TIME is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_REMAP=y
-CONFIG_DTC=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_BRCMSTB=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_BCM63138=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BCM_UNIMAC=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MTD_BRCM_U_BOOT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_BRCMNAND=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_OF_PARTS_BCM4908=y
-# CONFIG_MTD_OF_PARTS_LINKSYS_NS is not set
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPLIT_CFE_BOOTFS=y
-# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_BCM_SF2=y
-CONFIG_NET_DSA_TAG_BRCM=y
-CONFIG_NET_DSA_TAG_BRCM_COMMON=y
-CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
-CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NO_IOPORT_MAP=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_NVMEM_U_BOOT_ENV=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_BRCM_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BCM4908=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RELOCATABLE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VMAP_STACK=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/bcm4908/files-5.10/drivers/net/ethernet/broadcom/unimac.h b/target/linux/bcm4908/files-5.10/drivers/net/ethernet/broadcom/unimac.h
deleted file mode 100644
index 585a85286257..000000000000
--- a/target/linux/bcm4908/files-5.10/drivers/net/ethernet/broadcom/unimac.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#ifndef __UNIMAC_H
-#define __UNIMAC_H
-
-#define UMAC_HD_BKP_CTRL		0x004
-#define  HD_FC_EN			(1 << 0)
-#define  HD_FC_BKOFF_OK			(1 << 1)
-#define  IPG_CONFIG_RX_SHIFT		2
-#define  IPG_CONFIG_RX_MASK		0x1F
-#define UMAC_CMD			0x008
-#define  CMD_TX_EN			(1 << 0)
-#define  CMD_RX_EN			(1 << 1)
-#define  CMD_SPEED_10			0
-#define  CMD_SPEED_100			1
-#define  CMD_SPEED_1000			2
-#define  CMD_SPEED_2500			3
-#define  CMD_SPEED_SHIFT		2
-#define  CMD_SPEED_MASK			3
-#define  CMD_PROMISC			(1 << 4)
-#define  CMD_PAD_EN			(1 << 5)
-#define  CMD_CRC_FWD			(1 << 6)
-#define  CMD_PAUSE_FWD			(1 << 7)
-#define  CMD_RX_PAUSE_IGNORE		(1 << 8)
-#define  CMD_TX_ADDR_INS		(1 << 9)
-#define  CMD_HD_EN			(1 << 10)
-#define  CMD_SW_RESET_OLD		(1 << 11)
-#define  CMD_SW_RESET			(1 << 13)
-#define  CMD_LCL_LOOP_EN		(1 << 15)
-#define  CMD_AUTO_CONFIG		(1 << 22)
-#define  CMD_CNTL_FRM_EN		(1 << 23)
-#define  CMD_NO_LEN_CHK			(1 << 24)
-#define  CMD_RMT_LOOP_EN		(1 << 25)
-#define  CMD_RX_ERR_DISC		(1 << 26)
-#define  CMD_PRBL_EN			(1 << 27)
-#define  CMD_TX_PAUSE_IGNORE		(1 << 28)
-#define  CMD_TX_RX_EN			(1 << 29)
-#define  CMD_RUNT_FILTER_DIS		(1 << 30)
-#define UMAC_MAC0			0x00c
-#define UMAC_MAC1			0x010
-#define UMAC_MAX_FRAME_LEN		0x014
-#define UMAC_PAUSE_QUANTA		0x018
-#define UMAC_MODE			0x044
-#define  MODE_LINK_STATUS		(1 << 5)
-#define UMAC_FRM_TAG0			0x048		/* outer tag */
-#define UMAC_FRM_TAG1			0x04c		/* inner tag */
-#define UMAC_TX_IPG_LEN			0x05c
-#define UMAC_EEE_CTRL			0x064
-#define  EN_LPI_RX_PAUSE		(1 << 0)
-#define  EN_LPI_TX_PFC			(1 << 1)
-#define  EN_LPI_TX_PAUSE		(1 << 2)
-#define  EEE_EN				(1 << 3)
-#define  RX_FIFO_CHECK			(1 << 4)
-#define  EEE_TX_CLK_DIS			(1 << 5)
-#define  DIS_EEE_10M			(1 << 6)
-#define  LP_IDLE_PREDICTION_MODE	(1 << 7)
-#define UMAC_EEE_LPI_TIMER		0x068
-#define UMAC_EEE_WAKE_TIMER		0x06C
-#define UMAC_EEE_REF_COUNT		0x070
-#define  EEE_REFERENCE_COUNT_MASK	0xffff
-#define UMAC_RX_IPG_INV			0x078
-#define UMAC_MACSEC_PROG_TX_CRC		0x310
-#define UMAC_MACSEC_CTRL		0x314
-#define UMAC_PAUSE_CTRL			0x330
-#define UMAC_TX_FLUSH			0x334
-#define UMAC_RX_FIFO_STATUS		0x338
-#define UMAC_TX_FIFO_STATUS		0x33c
-
-#endif
diff --git a/target/linux/bcm4908/patches-5.10/030-v5.11-0001-dt-bindings-arm-bcm-document-BCM4908-bindings.patch b/target/linux/bcm4908/patches-5.10/030-v5.11-0001-dt-bindings-arm-bcm-document-BCM4908-bindings.patch
deleted file mode 100644
index 66726cbf0ba4..000000000000
--- a/target/linux/bcm4908/patches-5.10/030-v5.11-0001-dt-bindings-arm-bcm-document-BCM4908-bindings.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 2f8913a7b17efd3a116825160a2d3a6610444587 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 12 Nov 2020 16:08:31 +0100
-Subject: [PATCH] dt-bindings: arm: bcm: document BCM4908 bindings
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 is a new family that includes BCM4906, BCM4908 and BCM49408.
-It's mostly used in home routers and often replaces Northstar in vendors
-portfolio.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bindings/arm/bcm/brcm,bcm4908.yaml        | 38 +++++++++++++++++++
- 1 file changed, 38 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-@@ -0,0 +1,38 @@
-+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4908.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom BCM4908 device tree bindings
-+
-+description:
-+  Broadcom BCM4906 / BCM4908 / BCM49408 Wi-Fi/network SoCs with Brahma CPUs.
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  $nodename:
-+    const: '/'
-+  compatible:
-+    oneOf:
-+      - description: BCM4906 based boards
-+        items:
-+          - const: brcm,bcm4906
-+          - const: brcm,bcm4908
-+
-+      - description: BCM4908 based boards
-+        items:
-+          - enum:
-+              - asus,gt-ac5300
-+          - const: brcm,bcm4908
-+
-+      - description: BCM49408 based boards
-+        items:
-+          - const: brcm,bcm49408
-+          - const: brcm,bcm4908
-+
-+additionalProperties: true
-+
-+...
diff --git a/target/linux/bcm4908/patches-5.10/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch b/target/linux/bcm4908/patches-5.10/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch
deleted file mode 100644
index fd7d6a5f11a9..000000000000
--- a/target/linux/bcm4908/patches-5.10/030-v5.11-0002-arm64-dts-broadcom-add-BCM4908-and-Asus-GT-AC5300-ea.patch
+++ /dev/null
@@ -1,307 +0,0 @@
-From 2961f69f151c0a6771f55cef46398fe49ca20902 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 12 Nov 2020 16:08:32 +0100
-Subject: [PATCH] arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early
- DTS files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-They don't descibe hardware fully yet but it's enough to boot a system.
-
-Some missing blocks:
-1. PMC (Power Management Controller?)
-2. Ethernet
-3. Crypto
-4. Thermal
-
-Asus DTS is missing defining full NAND partitions layout and buttons.
-
-Further changes will fill those gaps as soon as required bindings will
-be found / tested / added.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/Makefile         |   1 +
- arch/arm64/boot/dts/broadcom/bcm4908/Makefile |   2 +
- .../bcm4908/bcm4908-asus-gt-ac5300.dts        |  66 +++++++
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 187 ++++++++++++++++++
- 4 files changed, 256 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-
---- a/arch/arm64/boot/dts/broadcom/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/Makefile
-@@ -5,5 +5,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rp
- 			      bcm2837-rpi-3-b-plus.dtb \
- 			      bcm2837-rpi-cm3-io3.dtb
- 
-+subdir-y	+= bcm4908
- subdir-y	+= northstar2
- subdir-y	+= stingray
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-@@ -0,0 +1,2 @@
-+# SPDX-License-Identifier: GPL-2.0
-+dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -0,0 +1,66 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
-+#include "bcm4908.dtsi"
-+
-+/ {
-+	compatible = "asus,gt-ac5300", "brcm,bcm4908";
-+	model = "Asus GT-AC5300";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x40000000>;
-+	};
-+
-+	gpio-keys-polled {
-+		compatible = "gpio-keys-polled";
-+		poll-interval = <100>;
-+
-+		wifi {
-+			label = "WiFi";
-+			linux,code = <KEY_RFKILL>;
-+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		brightness {
-+			label = "LEDs";
-+			linux,code = <KEY_BRIGHTNESS_ZERO>;
-+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&nandcs {
-+	nand-ecc-strength = <4>;
-+	nand-ecc-step-size = <512>;
-+	nand-on-flash-bbt;
-+	brcm,nand-has-wp;
-+
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "cferom";
-+			reg = <0x0 0x100000>;
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -0,0 +1,187 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/dts-v1/;
-+
-+/ {
-+	interrupt-parent = <&gic>;
-+
-+	#address-cells = <2>;
-+	#size-cells = <2>;
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		cpu0: cpu@0 {
-+			device_type = "cpu";
-+			compatible = "brcm,brahma-b53";
-+			reg = <0x0>;
-+			next-level-cache = <&l2>;
-+		};
-+
-+		cpu1: cpu@1 {
-+			device_type = "cpu";
-+			compatible = "brcm,brahma-b53";
-+			reg = <0x1>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0xfff8>;
-+			next-level-cache = <&l2>;
-+		};
-+
-+		cpu2: cpu@2 {
-+			device_type = "cpu";
-+			compatible = "brcm,brahma-b53";
-+			reg = <0x2>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0xfff8>;
-+			next-level-cache = <&l2>;
-+		};
-+
-+		cpu3: cpu@3 {
-+			device_type = "cpu";
-+			compatible = "brcm,brahma-b53";
-+			reg = <0x3>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0xfff8>;
-+			next-level-cache = <&l2>;
-+		};
-+
-+		l2: l2-cache0 {
-+			compatible = "cache";
-+		};
-+	};
-+
-+	axi@81000000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x00 0x00 0x81000000 0x4000>;
-+
-+		gic: interrupt-controller@1000 {
-+			compatible = "arm,gic-400";
-+			#interrupt-cells = <3>;
-+			#address-cells = <0>;
-+			interrupt-controller;
-+			reg = <0x1000 0x1000>,
-+			      <0x2000 0x2000>;
-+		};
-+	};
-+
-+	timer {
-+		compatible = "arm,armv8-timer";
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+	};
-+
-+	pmu {
-+		compatible = "arm,cortex-a53-pmu";
-+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-+	};
-+
-+	clocks {
-+		periph_clk: periph_clk {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <50000000>;
-+			clock-output-names = "periph";
-+		};
-+	};
-+
-+	soc {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x00 0x00 0x80000000 0x10000>;
-+
-+		usb@c300 {
-+			compatible = "generic-ehci";
-+			reg = <0xc300 0x100>;
-+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		usb@c400 {
-+			compatible = "generic-ohci";
-+			reg = <0xc400 0x100>;
-+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		usb@d000 {
-+			compatible = "generic-xhci";
-+			reg = <0xd000 0x8c8>;
-+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+	};
-+
-+	bus@ff800000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x00 0x00 0xff800000 0x3000>;
-+
-+		timer: timer@400 {
-+			compatible = "brcm,bcm6328-timer", "syscon";
-+			reg = <0x400 0x3c>;
-+		};
-+
-+		gpio0: gpio-controller@500 {
-+			compatible = "brcm,bcm6345-gpio";
-+			reg-names = "dirout", "dat";
-+			reg = <0x500 0x28>, <0x528 0x28>;
-+
-+			#gpio-cells = <2>;
-+			gpio-controller;
-+		};
-+
-+		uart0: serial@640 {
-+			compatible = "brcm,bcm6345-uart";
-+			reg = <0x640 0x18>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&periph_clk>;
-+			clock-names = "periph";
-+			status = "okay";
-+		};
-+
-+		nand@1800 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
-+			reg = <0x1800 0x600>, <0x2000 0x10>;
-+			reg-names = "nand", "nand-int-base";
-+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "nand";
-+			status = "okay";
-+
-+			nandcs: nandcs@0 {
-+				compatible = "brcm,nandcs";
-+				reg = <0>;
-+			};
-+		};
-+
-+		reboot {
-+			compatible = "syscon-reboot";
-+			regmap = <&timer>;
-+			offset = <0x34>;
-+			mask = <1>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm4908/patches-5.10/030-v5.11-0003-v5.11-arm64-add-config-for-Broadcom-BCM4908-SoCs.patch b/target/linux/bcm4908/patches-5.10/030-v5.11-0003-v5.11-arm64-add-config-for-Broadcom-BCM4908-SoCs.patch
deleted file mode 100644
index 962517a57e31..000000000000
--- a/target/linux/bcm4908/patches-5.10/030-v5.11-0003-v5.11-arm64-add-config-for-Broadcom-BCM4908-SoCs.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From dccb22d078ebd098115e4f66bde1ee2249c8640b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 12 Nov 2020 16:08:30 +0100
-Subject: [PATCH] arm64: add config for Broadcom BCM4908 SoCs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add ARCH_BCM4908 config that can be used for compiling DTS files.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/Kconfig.platforms | 8 ++++++++
- arch/arm64/configs/defconfig | 1 +
- 2 files changed, 9 insertions(+)
-
---- a/arch/arm64/Kconfig.platforms
-+++ b/arch/arm64/Kconfig.platforms
-@@ -43,6 +43,14 @@ config ARCH_BCM2835
- 	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
- 	  These SoCs are used in the Raspberry Pi 3 and 4 devices.
- 
-+config ARCH_BCM4908
-+	bool "Broadcom BCM4908 family"
-+	select GPIOLIB
-+	help
-+	  This enables support for the Broadcom BCM4906, BCM4908 and
-+	  BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be
-+	  found in home routers.
-+
- config ARCH_BCM_IPROC
- 	bool "Broadcom iProc SoC Family"
- 	select COMMON_CLK_IPROC
---- a/arch/arm64/configs/defconfig
-+++ b/arch/arm64/configs/defconfig
-@@ -32,6 +32,7 @@ CONFIG_ARCH_AGILEX=y
- CONFIG_ARCH_SUNXI=y
- CONFIG_ARCH_ALPINE=y
- CONFIG_ARCH_BCM2835=y
-+CONFIG_ARCH_BCM4908=y
- CONFIG_ARCH_BCM_IPROC=y
- CONFIG_ARCH_BERLIN=y
- CONFIG_ARCH_BRCMSTB=y
diff --git a/target/linux/bcm4908/patches-5.10/031-v5.12-0001-dt-bindings-arm-bcm-document-Netgear-R8000P-binding.patch b/target/linux/bcm4908/patches-5.10/031-v5.12-0001-dt-bindings-arm-bcm-document-Netgear-R8000P-binding.patch
deleted file mode 100644
index 24a0749c7770..000000000000
--- a/target/linux/bcm4908/patches-5.10/031-v5.12-0001-dt-bindings-arm-bcm-document-Netgear-R8000P-binding.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 3a5da4f54801ac42837a0b3151fa8285e01e8b0e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 8 Dec 2020 08:03:03 +0100
-Subject: [PATCH] dt-bindings: arm: bcm: document Netgear R8000P binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a BCM4906 based device.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-@@ -19,6 +19,8 @@ properties:
-     oneOf:
-       - description: BCM4906 based boards
-         items:
-+          - enum:
-+              - netgear,r8000p
-           - const: brcm,bcm4906
-           - const: brcm,bcm4908
- 
diff --git a/target/linux/bcm4908/patches-5.10/031-v5.12-0002-arm64-dts-broadcom-bcm4908-add-BCM4906-Netgear-R8000.patch b/target/linux/bcm4908/patches-5.10/031-v5.12-0002-arm64-dts-broadcom-bcm4908-add-BCM4906-Netgear-R8000.patch
deleted file mode 100644
index 93fa2150afcd..000000000000
--- a/target/linux/bcm4908/patches-5.10/031-v5.12-0002-arm64-dts-broadcom-bcm4908-add-BCM4906-Netgear-R8000.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From c8b404fb05dcfadff477e49b7ea6b500e015f101 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 8 Dec 2020 08:03:04 +0100
-Subject: [PATCH 2/4] arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P
- DTS files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Netgear R8000P is home router based on BCM4906 that is a cheaper variant
-of BCM4908 (e.g. 2 cores instead of 4).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/Makefile |  1 +
- .../bcm4908/bcm4906-netgear-r8000p.dts        | 52 +++++++++++++++++++
- .../boot/dts/broadcom/bcm4908/bcm4906.dtsi    | 18 +++++++
- 3 files changed, 71 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-@@ -1,2 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
-+dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -0,0 +1,52 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+
-+#include "bcm4906.dtsi"
-+
-+/ {
-+	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908";
-+	model = "Netgear R8000P";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x20000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		wps {
-+			function = LED_FUNCTION_WPS;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&nandcs {
-+	nand-ecc-strength = <4>;
-+	nand-ecc-step-size = <512>;
-+	nand-on-flash-bbt;
-+
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "cferom";
-+			reg = <0x0 0x100000>;
-+		};
-+
-+		partition@100000 {
-+			label = "firmware";
-+			reg = <0x100000 0x4400000>;
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
-@@ -0,0 +1,18 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include "bcm4908.dtsi"
-+
-+/ {
-+	cpus {
-+		/delete-node/ cpu@2;
-+
-+		/delete-node/ cpu@3;
-+	};
-+
-+	pmu {
-+		compatible = "arm,cortex-a53-pmu";
-+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-affinity = <&cpu0>, <&cpu1>;
-+	};
-+};
diff --git a/target/linux/bcm4908/patches-5.10/031-v5.12-0003-arm64-dts-broadcom-bcm4908-use-proper-NAND-binding.patch b/target/linux/bcm4908/patches-5.10/031-v5.12-0003-arm64-dts-broadcom-bcm4908-use-proper-NAND-binding.patch
deleted file mode 100644
index ccd260fadfeb..000000000000
--- a/target/linux/bcm4908/patches-5.10/031-v5.12-0003-arm64-dts-broadcom-bcm4908-use-proper-NAND-binding.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 56098be85d19cd56b59d7b3854ea035cc8cb9e95 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 8 Dec 2020 11:49:50 +0100
-Subject: [PATCH 3/4] arm64: dts: broadcom: bcm4908: use proper NAND binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has controller that needs different IRQ handling just like the
-BCM63138. Describe it properly.
-
-On Linux this change fixes:
-brcmstb_nand ff801800.nand: timeout waiting for command 0x9
-brcmstb_nand ff801800.nand: intfc status d0000000
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -164,7 +164,7 @@
- 		nand@1800 {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
--			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
-+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
- 			reg = <0x1800 0x600>, <0x2000 0x10>;
- 			reg-names = "nand", "nand-int-base";
- 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/target/linux/bcm4908/patches-5.10/031-v5.12-0004-arm64-dts-broadcom-bcm4908-describe-PCIe-reset-contr.patch b/target/linux/bcm4908/patches-5.10/031-v5.12-0004-arm64-dts-broadcom-bcm4908-describe-PCIe-reset-contr.patch
deleted file mode 100644
index 8ce4d69d8f1e..000000000000
--- a/target/linux/bcm4908/patches-5.10/031-v5.12-0004-arm64-dts-broadcom-bcm4908-describe-PCIe-reset-contr.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 1b88c6ed26a1aa1d68d1661404e6e939709ff530 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 10 Dec 2020 08:21:54 +0100
-Subject: [PATCH 4/4] arm64: dts: broadcom: bcm4908: describe PCIe reset
- controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reset controller is a single register in the Broadcom's MISC block.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -177,6 +177,21 @@
- 			};
- 		};
- 
-+		misc@2600 {
-+			compatible = "brcm,misc", "simple-mfd";
-+			reg = <0x2600 0xe4>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0x00 0x2600 0xe4>;
-+
-+			reset-controller@2644 {
-+				compatible = "brcm,bcm4908-misc-pcie-reset";
-+				reg = <0x44 0x04>;
-+				#reset-cells = <1>;
-+			};
-+		};
-+
- 		reboot {
- 			compatible = "syscon-reboot";
- 			regmap = <&timer>;
diff --git a/target/linux/bcm4908/patches-5.10/031-v5.12-0005-arm64-dts-broadcom-bcm4908-describe-internal-switch.patch b/target/linux/bcm4908/patches-5.10/031-v5.12-0005-arm64-dts-broadcom-bcm4908-describe-internal-switch.patch
deleted file mode 100644
index f80dc239bcb8..000000000000
--- a/target/linux/bcm4908/patches-5.10/031-v5.12-0005-arm64-dts-broadcom-bcm4908-describe-internal-switch.patch
+++ /dev/null
@@ -1,184 +0,0 @@
-From 527a3ac9bdf81da4b7160ce3cea57f28a0e5eb64 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 13 Jan 2021 12:14:06 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe internal switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has internal switch with 5 GPHYs. Ports 0 - 3 are always
-connected to the internal PHYs. Remaining ports depend on device setup.
-
-Asus GT-AC5300 has an extra switch with its PHYs accessible using the
-internal MDIO.
-
-CPU port and Ethernet interface remain to be documented.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bcm4908/bcm4908-asus-gt-ac5300.dts        | 51 +++++++++++
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 85 ++++++++++++++++++-
- 2 files changed, 135 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -44,6 +44,57 @@
- 	};
- };
- 
-+&ports {
-+	port@0 {
-+		label = "lan2";
-+	};
-+
-+	port@1 {
-+		label = "lan1";
-+	};
-+
-+	port@2 {
-+		label = "lan6";
-+	};
-+
-+	port@3 {
-+		label = "lan5";
-+	};
-+
-+	/* External BCM53134S switch */
-+	port@7 {
-+		label = "sw";
-+		reg = <7>;
-+
-+		fixed-link {
-+			speed = <1000>;
-+			full-duplex;
-+		};
-+	};
-+};
-+
-+&mdio {
-+	/* lan8 */
-+	ethernet-phy@0 {
-+		reg = <0>;
-+	};
-+
-+	/* lan7 */
-+	ethernet-phy@1 {
-+		reg = <1>;
-+	};
-+
-+	/* lan4 */
-+	ethernet-phy@2 {
-+		reg = <2>;
-+	};
-+
-+	/* lan3 */
-+	ethernet-phy@3 {
-+		reg = <3>;
-+	};
-+};
-+
- &nandcs {
- 	nand-ecc-strength = <4>;
- 	nand-ecc-step-size = <512>;
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -108,7 +108,7 @@
- 		compatible = "simple-bus";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
--		ranges = <0x00 0x00 0x80000000 0x10000>;
-+		ranges = <0x00 0x00 0x80000000 0xd0000>;
- 
- 		usb@c300 {
- 			compatible = "generic-ehci";
-@@ -130,6 +130,89 @@
- 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- 			status = "disabled";
- 		};
-+
-+		ethernet-switch@80000 {
-+			compatible = "simple-bus";
-+			#size-cells = <1>;
-+			#address-cells = <1>;
-+			ranges = <0 0x80000 0x50000>;
-+
-+			ethernet-switch@0 {
-+				compatible = "brcm,bcm4908-switch";
-+				reg = <0x0 0x40000>,
-+				      <0x40000 0x110>,
-+				      <0x40340 0x30>,
-+				      <0x40380 0x30>,
-+				      <0x40600 0x34>,
-+				      <0x40800 0x208>;
-+				reg-names = "core", "reg", "intrl2_0",
-+					    "intrl2_1", "fcb", "acb";
-+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-+					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-+				brcm,num-gphy = <5>;
-+				brcm,num-rgmii-ports = <2>;
-+
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				ports: ports {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					port@0 {
-+						reg = <0>;
-+						phy-mode = "internal";
-+						phy-handle = <&phy8>;
-+					};
-+
-+					port@1 {
-+						reg = <1>;
-+						phy-mode = "internal";
-+						phy-handle = <&phy9>;
-+					};
-+
-+					port@2 {
-+						reg = <2>;
-+						phy-mode = "internal";
-+						phy-handle = <&phy10>;
-+					};
-+
-+					port@3 {
-+						reg = <3>;
-+						phy-mode = "internal";
-+						phy-handle = <&phy11>;
-+					};
-+				};
-+			};
-+
-+			mdio: mdio@405c0 {
-+				compatible = "brcm,unimac-mdio";
-+				reg = <0x405c0 0x8>;
-+				reg-names = "mdio";
-+				#size-cells = <0>;
-+				#address-cells = <1>;
-+
-+				phy8: ethernet-phy@8 {
-+					reg = <8>;
-+				};
-+
-+				phy9: ethernet-phy@9 {
-+					reg = <9>;
-+				};
-+
-+				phy10: ethernet-phy@a {
-+					reg = <10>;
-+				};
-+
-+				phy11: ethernet-phy@b {
-+					reg = <11>;
-+				};
-+
-+				phy12: ethernet-phy@c {
-+					reg = <12>;
-+				};
-+			};
-+		};
- 	};
- 
- 	bus@ff800000 {
diff --git a/target/linux/bcm4908/patches-5.10/031-v5.12-0006-arm64-dts-broadcom-bcm4908-describe-PMB-block.patch b/target/linux/bcm4908/patches-5.10/031-v5.12-0006-arm64-dts-broadcom-bcm4908-describe-PMB-block.patch
deleted file mode 100644
index c1a9c35837bc..000000000000
--- a/target/linux/bcm4908/patches-5.10/031-v5.12-0006-arm64-dts-broadcom-bcm4908-describe-PMB-block.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From edcf90801c8e58bd6306d85a4e714a6f09f452df Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 13 Jan 2021 12:15:47 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe PMB block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-PMB (Power Management Bus) controls powering connected devices (e.g.
-PCIe, USB, SATA). In BCM4908 it's a part of the PROCMON block.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi      | 17 ++++++++++++++++-
- 1 file changed, 16 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -108,7 +108,7 @@
- 		compatible = "simple-bus";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
--		ranges = <0x00 0x00 0x80000000 0xd0000>;
-+		ranges = <0x00 0x00 0x80000000 0x281000>;
- 
- 		usb@c300 {
- 			compatible = "generic-ehci";
-@@ -213,6 +213,21 @@
- 				};
- 			};
- 		};
-+
-+		procmon: syscon@280000 {
-+			compatible = "simple-bus";
-+			reg = <0x280000 0x1000>;
-+			ranges;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			power-controller@2800c0 {
-+				compatible = "brcm,bcm4908-pmb";
-+				reg = <0x2800c0 0x40>;
-+				#power-domain-cells = <1>;
-+			};
-+		};
- 	};
- 
- 	bus@ff800000 {
diff --git a/target/linux/bcm4908/patches-5.10/032-v5.13-0001-arm64-dts-broadcom-bcm4908-describe-USB-PHY.patch b/target/linux/bcm4908/patches-5.10/032-v5.13-0001-arm64-dts-broadcom-bcm4908-describe-USB-PHY.patch
deleted file mode 100644
index edf2ca6a38ae..000000000000
--- a/target/linux/bcm4908/patches-5.10/032-v5.13-0001-arm64-dts-broadcom-bcm4908-describe-USB-PHY.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From 3c321ba794ca6383a4aa68ea803e18cc6ad44412 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 19 Feb 2021 06:50:26 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe USB PHY
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 uses slightly modified STB family USB PHY. It handles OHCI/EHCI
-and XHCI. It requires powering up using the PMB.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bcm4908/bcm4906-netgear-r8000p.dts        | 17 +++++++++++++
- .../bcm4908/bcm4908-asus-gt-ac5300.dts        | 17 +++++++++++++
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 25 ++++++++++++++++---
- 3 files changed, 55 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -26,6 +26,23 @@
- 	};
- };
- 
-+&usb_phy {
-+	brcm,ioc = <1>;
-+	status = "okay";
-+};
-+
-+&ehci {
-+	status = "okay";
-+};
-+
-+&ohci {
-+	status = "okay";
-+};
-+
-+&xhci {
-+	status = "okay";
-+};
-+
- &nandcs {
- 	nand-ecc-strength = <4>;
- 	nand-ecc-step-size = <512>;
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -44,6 +44,23 @@
- 	};
- };
- 
-+&usb_phy {
-+	brcm,ioc = <1>;
-+	status = "okay";
-+};
-+
-+&ehci {
-+	status = "okay";
-+};
-+
-+&ohci {
-+	status = "okay";
-+};
-+
-+&xhci {
-+	status = "okay";
-+};
-+
- &ports {
- 	port@0 {
- 		label = "lan2";
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -2,6 +2,8 @@
- 
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/phy/phy.h>
-+#include <dt-bindings/soc/bcm-pmb.h>
- 
- /dts-v1/;
- 
-@@ -110,24 +112,39 @@
- 		#size-cells = <1>;
- 		ranges = <0x00 0x00 0x80000000 0x281000>;
- 
--		usb@c300 {
-+		usb_phy: usb-phy@c200 {
-+			compatible = "brcm,bcm4908-usb-phy";
-+			reg = <0xc200 0x100>;
-+			reg-names = "ctrl";
-+			power-domains = <&pmb BCM_PMB_HOST_USB>;
-+			dr_mode = "host";
-+			brcm,has-xhci;
-+			brcm,has-eohci;
-+			#phy-cells = <1>;
-+			status = "disabled";
-+		};
-+
-+		ehci: usb@c300 {
- 			compatible = "generic-ehci";
- 			reg = <0xc300 0x100>;
- 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-+			phys = <&usb_phy PHY_TYPE_USB2>;
- 			status = "disabled";
- 		};
- 
--		usb@c400 {
-+		ohci: usb@c400 {
- 			compatible = "generic-ohci";
- 			reg = <0xc400 0x100>;
- 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-+			phys = <&usb_phy PHY_TYPE_USB2>;
- 			status = "disabled";
- 		};
- 
--		usb@d000 {
-+		xhci: usb@d000 {
- 			compatible = "generic-xhci";
- 			reg = <0xd000 0x8c8>;
- 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-+			phys = <&usb_phy PHY_TYPE_USB3>;
- 			status = "disabled";
- 		};
- 
-@@ -222,7 +239,7 @@
- 			#address-cells = <1>;
- 			#size-cells = <1>;
- 
--			power-controller@2800c0 {
-+			pmb: power-controller@2800c0 {
- 				compatible = "brcm,bcm4908-pmb";
- 				reg = <0x2800c0 0x40>;
- 				#power-domain-cells = <1>;
diff --git a/target/linux/bcm4908/patches-5.10/032-v5.13-0002-arm64-dts-broadcom-bcm4908-describe-Ethernet-control.patch b/target/linux/bcm4908/patches-5.10/032-v5.13-0002-arm64-dts-broadcom-bcm4908-describe-Ethernet-control.patch
deleted file mode 100644
index 6c41e3d7977f..000000000000
--- a/target/linux/bcm4908/patches-5.10/032-v5.13-0002-arm64-dts-broadcom-bcm4908-describe-Ethernet-control.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From b1bbe48eec190b6a35f400c5a3ec6b0fc8fc3fe6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 19 Feb 2021 06:50:27 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe Ethernet controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 SoCs have an integrated Ethernet controller.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -112,6 +112,14 @@
- 		#size-cells = <1>;
- 		ranges = <0x00 0x00 0x80000000 0x281000>;
- 
-+		enet: ethernet@2000 {
-+			compatible = "brcm,bcm4908-enet";
-+			reg = <0x2000 0x1000>;
-+
-+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "rx";
-+		};
-+
- 		usb_phy: usb-phy@c200 {
- 			compatible = "brcm,bcm4908-usb-phy";
- 			reg = <0xc200 0x100>;
-@@ -199,6 +207,17 @@
- 						phy-mode = "internal";
- 						phy-handle = <&phy11>;
- 					};
-+
-+					port@8 {
-+						reg = <8>;
-+						phy-mode = "internal";
-+						ethernet = <&enet>;
-+
-+						fixed-link {
-+							speed = <1000>;
-+							full-duplex;
-+						};
-+					};
- 				};
- 			};
- 
diff --git a/target/linux/bcm4908/patches-5.10/032-v5.13-0003-arm64-dts-broadcom-bcm4908-describe-Netgear-R8000P-s.patch b/target/linux/bcm4908/patches-5.10/032-v5.13-0003-arm64-dts-broadcom-bcm4908-describe-Netgear-R8000P-s.patch
deleted file mode 100644
index 9c7f9cee6c72..000000000000
--- a/target/linux/bcm4908/patches-5.10/032-v5.13-0003-arm64-dts-broadcom-bcm4908-describe-Netgear-R8000P-s.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 406e98afffe975982f63ea5d21bf9a47a81b56ee Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 19 Feb 2021 06:50:28 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-R8000P model has 4 LAN ports and 1 WAN port.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bcm4908/bcm4906-netgear-r8000p.dts        | 25 +++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -43,6 +43,31 @@
- 	status = "okay";
- };
- 
-+&ports {
-+	port@0 {
-+		label = "lan4";
-+	};
-+
-+	port@1 {
-+		label = "lan3";
-+	};
-+
-+	port@2 {
-+		label = "lan2";
-+	};
-+
-+	port@3 {
-+		label = "lan1";
-+	};
-+
-+	port@7 {
-+		reg = <7>;
-+		phy-mode = "internal";
-+		phy-handle = <&phy12>;
-+		label = "wan";
-+	};
-+};
-+
- &nandcs {
- 	nand-ecc-strength = <4>;
- 	nand-ecc-step-size = <512>;
diff --git a/target/linux/bcm4908/patches-5.10/032-v5.13-0004-arm64-dts-broadcom-bcm4908-add-remaining-Netgear-R80.patch b/target/linux/bcm4908/patches-5.10/032-v5.13-0004-arm64-dts-broadcom-bcm4908-add-remaining-Netgear-R80.patch
deleted file mode 100644
index 56249c82f869..000000000000
--- a/target/linux/bcm4908/patches-5.10/032-v5.13-0004-arm64-dts-broadcom-bcm4908-add-remaining-Netgear-R80.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 6224415c0389ba6661825746312163a64ece8f3a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 19 Feb 2021 06:50:29 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P
- LEDs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are a few more GPIO connected LEDs there didn't get described
-initially.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bcm4908/bcm4906-netgear-r8000p.dts        | 50 ++++++++++++++++++-
- 1 file changed, 49 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -18,11 +18,59 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		wps {
-+		led-power-white {
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-power-amber {
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-wps {
- 			function = LED_FUNCTION_WPS;
- 			color = <LED_COLOR_ID_WHITE>;
- 			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- 		};
-+
-+		led-2ghz {
-+			function = "2ghz";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-5ghz-1 {
-+			function = "5ghz-1";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-5ghz-2 {
-+			function = "5ghz-2";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb2 {
-+			function = "usb2";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb3 {
-+			function = "usb3";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-wifi {
-+			function = "wifi";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
-+		};
- 	};
- };
- 
diff --git a/target/linux/bcm4908/patches-5.10/032-v5.13-0005-arm64-dts-broadcom-bcm4908-describe-firmware-partiti.patch b/target/linux/bcm4908/patches-5.10/032-v5.13-0005-arm64-dts-broadcom-bcm4908-describe-firmware-partiti.patch
deleted file mode 100644
index d03adc1743e1..000000000000
--- a/target/linux/bcm4908/patches-5.10/032-v5.13-0005-arm64-dts-broadcom-bcm4908-describe-firmware-partiti.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From cbaca2c467dc25a163107e14a53b7925214eab17 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 19 Feb 2021 06:50:30 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe firmware partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 bootloader supports multiple firmware partitions and has its own
-bindings defined for them.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts  |  1 +
- .../dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts  | 12 +++++++++++-
- 2 files changed, 12 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -135,6 +135,7 @@
- 		};
- 
- 		partition@100000 {
-+			compatible = "brcm,bcm4908-firmware";
- 			label = "firmware";
- 			reg = <0x100000 0x4400000>;
- 		};
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -122,7 +122,7 @@
- 	#size-cells = <0>;
- 
- 	partitions {
--		compatible = "fixed-partitions";
-+		compatible = "brcm,bcm4908-partitions";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 
-@@ -130,5 +130,15 @@
- 			label = "cferom";
- 			reg = <0x0 0x100000>;
- 		};
-+
-+		partition@100000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			reg = <0x100000 0x5700000>;
-+		};
-+
-+		partition@5800000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			reg = <0x5800000 0x5700000>;
-+		};
- 	};
- };
diff --git a/target/linux/bcm4908/patches-5.10/032-v5.13-0006-arm64-dts-broadcom-bcm4908-fix-switch-parent-node-na.patch b/target/linux/bcm4908/patches-5.10/032-v5.13-0006-arm64-dts-broadcom-bcm4908-fix-switch-parent-node-na.patch
deleted file mode 100644
index 8b95fc27594f..000000000000
--- a/target/linux/bcm4908/patches-5.10/032-v5.13-0006-arm64-dts-broadcom-bcm4908-fix-switch-parent-node-na.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From a348ff97ffb840b9d74b0e64b3e0e6002187d224 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 9 Mar 2021 19:44:09 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: fix switch parent node name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Ethernet switch and MDIO are grouped using "simple-bus". It's not
-allowed to use "ethernet-switch" node name as it isn't a switch. Replace
-it with "bus".
-
-Fixes: 527a3ac9bdf8 ("arm64: dts: broadcom: bcm4908: describe internal switch")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -156,7 +156,7 @@
- 			status = "disabled";
- 		};
- 
--		ethernet-switch@80000 {
-+		bus@80000 {
- 			compatible = "simple-bus";
- 			#size-cells = <1>;
- 			#address-cells = <1>;
diff --git a/target/linux/bcm4908/patches-5.10/032-v5.13-0007-dt-bindings-arm-bcm-document-TP-Link-Archer-C2300-bi.patch b/target/linux/bcm4908/patches-5.10/032-v5.13-0007-dt-bindings-arm-bcm-document-TP-Link-Archer-C2300-bi.patch
deleted file mode 100644
index 07d4121ef1e6..000000000000
--- a/target/linux/bcm4908/patches-5.10/032-v5.13-0007-dt-bindings-arm-bcm-document-TP-Link-Archer-C2300-bi.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From b3de2a12d1a61d90a4d86c9840acc7d05066137f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 10 Mar 2021 08:46:02 +0100
-Subject: [PATCH] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-One more BCM4906 based device.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-@@ -21,6 +21,7 @@ properties:
-         items:
-           - enum:
-               - netgear,r8000p
-+              - tplink,archer-c2300-v1
-           - const: brcm,bcm4906
-           - const: brcm,bcm4908
- 
diff --git a/target/linux/bcm4908/patches-5.10/032-v5.13-0008-arm64-dts-broadcom-bcm4908-add-TP-Link-Archer-C2300-.patch b/target/linux/bcm4908/patches-5.10/032-v5.13-0008-arm64-dts-broadcom-bcm4908-add-TP-Link-Archer-C2300-.patch
deleted file mode 100644
index 0dd7f2301fbd..000000000000
--- a/target/linux/bcm4908/patches-5.10/032-v5.13-0008-arm64-dts-broadcom-bcm4908-add-TP-Link-Archer-C2300-.patch
+++ /dev/null
@@ -1,212 +0,0 @@
-From 6a30934a5470a0ce7ea32b0c6b600accfae94b1a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 10 Mar 2021 08:46:03 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Archer C2300 V1 is a home router based on the BCM4906 (2 CPU cores). It
-has 512 MiB of RAM, NAND flash, USB 2.0 and USB 3.0 ports, 4 LAN ports,
-1 WAN port.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/Makefile |   1 +
- .../bcm4906-tplink-archer-c2300-v1.dts        | 182 ++++++++++++++++++
- 2 files changed, 183 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-@@ -1,3 +1,4 @@
- # SPDX-License-Identifier: GPL-2.0
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
-+dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-@@ -0,0 +1,182 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+
-+#include "bcm4906.dtsi"
-+
-+/ {
-+	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908";
-+	model = "TP-Link Archer C2300 V1";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x20000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led-power {
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-2ghz {
-+			function = "2ghz";
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-5ghz {
-+			function = "5ghz";
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-wan-amber {
-+			function = LED_FUNCTION_WAN;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		led-wan-blue {
-+			function = LED_FUNCTION_WAN;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-lan {
-+			function = LED_FUNCTION_LAN;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-wps {
-+			function = LED_FUNCTION_WPS;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb2 {
-+			function = "usb2";
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb3 {
-+			function = "usbd3";
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-brightness {
-+			function = LED_FUNCTION_BACKLIGHT;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-keys-polled {
-+		compatible = "gpio-keys-polled";
-+		poll-interval = <100>;
-+
-+		brightness {
-+			label = "LEDs";
-+			linux,code = <KEY_BRIGHTNESS_ZERO>;
-+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		wifi {
-+			label = "WiFi";
-+			linux,code = <KEY_RFKILL>;
-+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&usb_phy {
-+	brcm,ioc = <1>;
-+	status = "okay";
-+};
-+
-+&ehci {
-+	status = "okay";
-+};
-+
-+&ohci {
-+	status = "okay";
-+};
-+
-+&xhci {
-+	status = "okay";
-+};
-+
-+&ports {
-+	port@0 {
-+		label = "lan4";
-+	};
-+
-+	port@1 {
-+		label = "lan3";
-+	};
-+
-+	port@2 {
-+		label = "lan2";
-+	};
-+
-+	port@3 {
-+		label = "lan1";
-+	};
-+
-+	port@7 {
-+		reg = <7>;
-+		phy-mode = "internal";
-+		phy-handle = <&phy12>;
-+		label = "wan";
-+	};
-+};
-+
-+&nandcs {
-+	nand-ecc-strength = <4>;
-+	nand-ecc-step-size = <512>;
-+	nand-on-flash-bbt;
-+
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	partitions {
-+		compatible = "brcm,bcm4908-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "cferom";
-+			reg = <0x0 0x100000>;
-+		};
-+
-+		partition@100000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			reg = <0x100000 0x3900000>;
-+		};
-+
-+		partition@5800000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			reg = <0x3a00000 0x3900000>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm4908/patches-5.10/032-v5.13-0009-arm64-dts-broadcom-bcm4908-set-Asus-GT-AC5300-port-7.patch b/target/linux/bcm4908/patches-5.10/032-v5.13-0009-arm64-dts-broadcom-bcm4908-set-Asus-GT-AC5300-port-7.patch
deleted file mode 100644
index 30def36c394f..000000000000
--- a/target/linux/bcm4908/patches-5.10/032-v5.13-0009-arm64-dts-broadcom-bcm4908-set-Asus-GT-AC5300-port-7.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 5ccb9f9cf05bbd729430c6d6d30d40c96a15c56a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Mar 2021 12:01:20 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY
- mode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Port 7 is connected to the external BCM53134S switch using RGMII.
-
-Fixes: 527a3ac9bdf8 ("arm64: dts: broadcom: bcm4908: describe internal switch")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -82,6 +82,7 @@
- 	port@7 {
- 		label = "sw";
- 		reg = <7>;
-+		phy-mode = "rgmii";
- 
- 		fixed-link {
- 			speed = <1000>;
diff --git a/target/linux/bcm4908/patches-5.10/032-v5.13-0010-arm64-dts-broadcom-bcm4908-add-Ethernet-TX-irq.patch b/target/linux/bcm4908/patches-5.10/032-v5.13-0010-arm64-dts-broadcom-bcm4908-add-Ethernet-TX-irq.patch
deleted file mode 100644
index 9ba30b3a14d8..000000000000
--- a/target/linux/bcm4908/patches-5.10/032-v5.13-0010-arm64-dts-broadcom-bcm4908-add-Ethernet-TX-irq.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 5337af7918bedde9713cd223ce5df74b3d6c7d7a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 17 Mar 2021 09:16:31 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add Ethernet TX irq
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This hardware supports two interrupts, one per DMA channel (RX and TX).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -116,8 +116,9 @@
- 			compatible = "brcm,bcm4908-enet";
- 			reg = <0x2000 0x1000>;
- 
--			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
--			interrupt-names = "rx";
-+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "rx", "tx";
- 		};
- 
- 		usb_phy: usb-phy@c200 {
diff --git a/target/linux/bcm4908/patches-5.10/032-v5.13-0011-arm64-dts-broadcom-bcm4908-add-Ethernet-MAC-addr.patch b/target/linux/bcm4908/patches-5.10/032-v5.13-0011-arm64-dts-broadcom-bcm4908-add-Ethernet-MAC-addr.patch
deleted file mode 100644
index 67f30c821395..000000000000
--- a/target/linux/bcm4908/patches-5.10/032-v5.13-0011-arm64-dts-broadcom-bcm4908-add-Ethernet-MAC-addr.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 9f01f5cdb548352418b34ce77db02a560fe2913b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 29 Mar 2021 17:45:14 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add Ethernet MAC addr
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On most BCM4908 devices MAC address can be read from the bootloader
-binary section containing device settings. Use NVMEM to describe that.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../broadcom/bcm4908/bcm4906-netgear-r8000p.dts    | 14 ++++++++++++++
- .../broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts    | 14 ++++++++++++++
- 2 files changed, 28 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -74,6 +74,11 @@
- 	};
- };
- 
-+&enet {
-+	nvmem-cells = <&base_mac_addr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &usb_phy {
- 	brcm,ioc = <1>;
- 	status = "okay";
-@@ -130,8 +135,17 @@
- 		#size-cells = <1>;
- 
- 		partition@0 {
-+			compatible = "nvmem-cells";
- 			label = "cferom";
- 			reg = <0x0 0x100000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0 0x0 0x100000>;
-+
-+			base_mac_addr: mac@106a0 {
-+				reg = <0x106a0 0x6>;
-+			};
- 		};
- 
- 		partition@100000 {
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -44,6 +44,11 @@
- 	};
- };
- 
-+&enet {
-+	nvmem-cells = <&base_mac_addr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &usb_phy {
- 	brcm,ioc = <1>;
- 	status = "okay";
-@@ -128,8 +133,17 @@
- 		#size-cells = <1>;
- 
- 		partition@0 {
-+			compatible = "nvmem-cells";
- 			label = "cferom";
- 			reg = <0x0 0x100000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0 0x0 0x100000>;
-+
-+			base_mac_addr: mac@106a0 {
-+				reg = <0x106a0 0x6>;
-+			};
- 		};
- 
- 		partition@100000 {
diff --git a/target/linux/bcm4908/patches-5.10/033-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch b/target/linux/bcm4908/patches-5.10/033-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch
deleted file mode 100644
index 757b2c439db5..000000000000
--- a/target/linux/bcm4908/patches-5.10/033-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From b660269cba748dfd07eb5551a88ff34d5ea0b86e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 16 Apr 2021 15:37:48 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix NAND nodes names
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches nand-controller.yaml requirements.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -306,7 +306,7 @@
- 			interrupt-names = "nand";
- 			status = "okay";
- 
--			nandcs: nandcs@0 {
-+			nandcs: nand@0 {
- 				compatible = "brcm,nandcs";
- 				reg = <0>;
- 			};
diff --git a/target/linux/bcm4908/patches-5.10/034-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch b/target/linux/bcm4908/patches-5.10/034-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch
deleted file mode 100644
index 80ce766751c7..000000000000
--- a/target/linux/bcm4908/patches-5.10/034-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From d0ae9c944b9472c5691a482297df7a57d7fd1199 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 14:11:08 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix NAND node name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches nand-controller.yaml requirements.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -296,7 +296,7 @@
- 			status = "okay";
- 		};
- 
--		nand@1800 {
-+		nand-controller@1800 {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
diff --git a/target/linux/bcm4908/patches-5.10/034-v5.16-0002-arm64-dts-broadcom-bcm4908-Move-reboot-syscon-out-of.patch b/target/linux/bcm4908/patches-5.10/034-v5.16-0002-arm64-dts-broadcom-bcm4908-Move-reboot-syscon-out-of.patch
deleted file mode 100644
index 6ac618a76866..000000000000
--- a/target/linux/bcm4908/patches-5.10/034-v5.16-0002-arm64-dts-broadcom-bcm4908-Move-reboot-syscon-out-of.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 6cf9f70255b90b540b9cbde062f18fea29024a75 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 14:26:06 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: Move reboot syscon out of bus
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes following error for every bcm4908 DTS file:
-bus@ff800000: reboot: {'type': 'object'} is not allowed for {'compatible': ['syscon-reboot'], 'regmap': [[15]], 'offset': [[52]], 'mask': [[1]]}
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -326,12 +326,12 @@
- 				#reset-cells = <1>;
- 			};
- 		};
-+	};
- 
--		reboot {
--			compatible = "syscon-reboot";
--			regmap = <&timer>;
--			offset = <0x34>;
--			mask = <1>;
--		};
-+	reboot {
-+		compatible = "syscon-reboot";
-+		regmap = <&timer>;
-+		offset = <0x34>;
-+		mask = <1>;
- 	};
- };
diff --git a/target/linux/bcm4908/patches-5.10/034-v5.16-0003-arm64-dts-broadcom-bcm4908-Fix-UART-clock-name.patch b/target/linux/bcm4908/patches-5.10/034-v5.16-0003-arm64-dts-broadcom-bcm4908-Fix-UART-clock-name.patch
deleted file mode 100644
index af9441875cbd..000000000000
--- a/target/linux/bcm4908/patches-5.10/034-v5.16-0003-arm64-dts-broadcom-bcm4908-Fix-UART-clock-name.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 6c38c39ab2141f53786d73e706675e8819a3f2cb Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 17:37:02 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix UART clock name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-According to the binding the correct clock name is "refclk".
-
-Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -292,7 +292,7 @@
- 			reg = <0x640 0x18>;
- 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&periph_clk>;
--			clock-names = "periph";
-+			clock-names = "refclk";
- 			status = "okay";
- 		};
- 
diff --git a/target/linux/bcm4908/patches-5.10/035-v5.17-0001-dt-bindings-arm-bcm-document-Netgear-RAXE500-binding.patch b/target/linux/bcm4908/patches-5.10/035-v5.17-0001-dt-bindings-arm-bcm-document-Netgear-RAXE500-binding.patch
deleted file mode 100644
index 4d5ffcb9e352..000000000000
--- a/target/linux/bcm4908/patches-5.10/035-v5.17-0001-dt-bindings-arm-bcm-document-Netgear-RAXE500-binding.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 7b0c9ca7f18e8d2e2cf3c342d91f037d436777bf Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Nov 2021 11:14:12 +0100
-Subject: [PATCH] dt-bindings: arm: bcm: document Netgear RAXE500 binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-One more BCM4908 based device.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-@@ -29,6 +29,7 @@ properties:
-         items:
-           - enum:
-               - asus,gt-ac5300
-+              - netgear,raxe500
-           - const: brcm,bcm4908
- 
-       - description: BCM49408 based boards
diff --git a/target/linux/bcm4908/patches-5.10/035-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch b/target/linux/bcm4908/patches-5.10/035-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch
deleted file mode 100644
index 9e0236ad0f40..000000000000
--- a/target/linux/bcm4908/patches-5.10/035-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From d0e68d354f345873e15876a7b35be1baaf5e3ec9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Nov 2021 11:14:13 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add DT for Netgear RAXE500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a home router based on BCM4908 SoC. It has: 1 GiB of RAM, 512 MiB
-NAND flash, 6 Ethernet ports and 3 x BCM43684 (WiFi). One of Ethernet
-ports is "2.5 G Multi-Gig port" that isn't described yet (it isn't known
-how it's wired up).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/Makefile |  1 +
- .../bcm4908/bcm4908-netgear-raxe500.dts       | 50 +++++++++++++++++++
- 2 files changed, 51 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-@@ -2,3 +2,4 @@
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
-+dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
-@@ -0,0 +1,50 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include "bcm4908.dtsi"
-+
-+/ {
-+	compatible = "netgear,raxe500", "brcm,bcm4908";
-+	model = "Netgear RAXE500";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x40000000>;
-+	};
-+};
-+
-+&ehci {
-+	status = "okay";
-+};
-+
-+&ohci {
-+	status = "okay";
-+};
-+
-+&xhci {
-+	status = "okay";
-+};
-+
-+&ports {
-+	port@0 {
-+		label = "lan4";
-+	};
-+
-+	port@1 {
-+		label = "lan3";
-+	};
-+
-+	port@2 {
-+		label = "lan2";
-+	};
-+
-+	port@3 {
-+		label = "lan1";
-+	};
-+
-+	port@7 {
-+		reg = <7>;
-+		phy-mode = "internal";
-+		phy-handle = <&phy12>;
-+		label = "wan";
-+	};
-+};
diff --git a/target/linux/bcm4908/patches-5.10/036-v5.18-0001-arm64-dts-broadcom-bcm4908-use-proper-TWD-binding.patch b/target/linux/bcm4908/patches-5.10/036-v5.18-0001-arm64-dts-broadcom-bcm4908-use-proper-TWD-binding.patch
deleted file mode 100644
index 420f790fddaa..000000000000
--- a/target/linux/bcm4908/patches-5.10/036-v5.18-0001-arm64-dts-broadcom-bcm4908-use-proper-TWD-binding.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 33826e9c6ba76b265d4e26cb95493fa27ed78974 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 29 Dec 2021 11:23:14 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: use proper TWD binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Block at <ff800400 0x4c> is a TWD that contains timers, watchdog and
-reset. Actual timers happen to be at block beginning but they only span
-across the first 0x28 registers. It means the old block description was
-incorrect (size 0x3c).
-
-Drop timers binding for now and use documented TWD binding. Timers
-should be properly documented and defined as TWD subnode.
-
-Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -273,9 +273,9 @@
- 		#size-cells = <1>;
- 		ranges = <0x00 0x00 0xff800000 0x3000>;
- 
--		timer: timer@400 {
--			compatible = "brcm,bcm6328-timer", "syscon";
--			reg = <0x400 0x3c>;
-+		twd: timer-mfd@400 {
-+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
-+			reg = <0x400 0x4c>;
- 		};
- 
- 		gpio0: gpio-controller@500 {
-@@ -330,7 +330,7 @@
- 
- 	reboot {
- 		compatible = "syscon-reboot";
--		regmap = <&timer>;
-+		regmap = <&twd>;
- 		offset = <0x34>;
- 		mask = <1>;
- 	};
diff --git a/target/linux/bcm4908/patches-5.10/036-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch b/target/linux/bcm4908/patches-5.10/036-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch
deleted file mode 100644
index 2f4baf80c6bb..000000000000
--- a/target/linux/bcm4908/patches-5.10/036-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From 72b1c5da796ec5266f2012c36470e226cb4f09c9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 30 Dec 2021 12:05:35 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add pinctrl binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Describe pinmux block with its maps.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 135 ++++++++++++++++++
- 1 file changed, 135 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -287,6 +287,141 @@
- 			gpio-controller;
- 		};
- 
-+		pinctrl@560 {
-+			compatible = "brcm,bcm4908-pinctrl";
-+			reg = <0x560 0x10>;
-+
-+			pins_led_0_a: led_0-a-pins {
-+				function = "led_0";
-+				groups = "led_0_grp_a";
-+			};
-+
-+			pins_led_1_a: led_1-a-pins {
-+				function = "led_1";
-+				groups = "led_1_grp_a";
-+			};
-+
-+			pins_led_2_a: led_2-a-pins {
-+				function = "led_2";
-+				groups = "led_2_grp_a";
-+			};
-+
-+			pins_led_3_a: led_3-a-pins {
-+				function = "led_3";
-+				groups = "led_3_grp_a";
-+			};
-+
-+			pins_led_4_a: led_4-a-pins {
-+				function = "led_4";
-+				groups = "led_4_grp_a";
-+			};
-+
-+			pins_led_5_a: led_5-a-pins {
-+				function = "led_5";
-+				groups = "led_5_grp_a";
-+			};
-+
-+			pins_led_6_a: led_6-a-pins {
-+				function = "led_6";
-+				groups = "led_6_grp_a";
-+			};
-+
-+			pins_led_7_a: led_7-a-pins {
-+				function = "led_7";
-+				groups = "led_7_grp_a";
-+			};
-+
-+			pins_led_8_a: led_8-a-pins {
-+				function = "led_8";
-+				groups = "led_8_grp_a";
-+			};
-+
-+			pins_led_9_a: led_9-a-pins {
-+				function = "led_9";
-+				groups = "led_9_grp_a";
-+			};
-+
-+			pins_led_21_a: led_21-a-pins {
-+				function = "led_21";
-+				groups = "led_21_grp_a";
-+			};
-+
-+			pins_led_22_a: led_22-a-pins {
-+				function = "led_22";
-+				groups = "led_22_grp_a";
-+			};
-+
-+			pins_led_26_a: led_26-a-pins {
-+				function = "led_26";
-+				groups = "led_26_grp_a";
-+			};
-+
-+			pins_led_27_a: led_27-a-pins {
-+				function = "led_27";
-+				groups = "led_27_grp_a";
-+			};
-+
-+			pins_led_28_a: led_28-a-pins {
-+				function = "led_28";
-+				groups = "led_28_grp_a";
-+			};
-+
-+			pins_led_29_a: led_29-a-pins {
-+				function = "led_29";
-+				groups = "led_29_grp_a";
-+			};
-+
-+			pins_led_30_a: led_30-a-pins {
-+				function = "led_30";
-+				groups = "led_30_grp_a";
-+			};
-+
-+			pins_hs_uart: hs_uart-pins {
-+				function = "hs_uart";
-+				groups = "hs_uart_grp";
-+			};
-+
-+			pins_i2c_a: i2c-a-pins {
-+				function = "i2c";
-+				groups = "i2c_grp_a";
-+			};
-+
-+			pins_i2c_b: i2c-b-pins {
-+				function = "i2c";
-+				groups = "i2c_grp_b";
-+			};
-+
-+			pins_i2s: i2s-pins {
-+				function = "i2s";
-+				groups = "i2s_grp";
-+			};
-+
-+			pins_nand_ctrl: nand_ctrl-pins {
-+				function = "nand_ctrl";
-+				groups = "nand_ctrl_grp";
-+			};
-+
-+			pins_nand_data: nand_data-pins {
-+				function = "nand_data";
-+				groups = "nand_data_grp";
-+			};
-+
-+			pins_emmc_ctrl: emmc_ctrl-pins {
-+				function = "emmc_ctrl";
-+				groups = "emmc_ctrl_grp";
-+			};
-+
-+			pins_usb0_pwr: usb0_pwr-pins {
-+				function = "usb0_pwr";
-+				groups = "usb0_pwr_grp";
-+			};
-+
-+			pins_usb1_pwr: usb1_pwr-pins {
-+				function = "usb1_pwr";
-+				groups = "usb1_pwr_grp";
-+			};
-+		};
-+
- 		uart0: serial@640 {
- 			compatible = "brcm,bcm6345-uart";
- 			reg = <0x640 0x18>;
diff --git a/target/linux/bcm4908/patches-5.10/036-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch b/target/linux/bcm4908/patches-5.10/036-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch
deleted file mode 100644
index 3ca778dcd8ca..000000000000
--- a/target/linux/bcm4908/patches-5.10/036-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 47513f6dd93b5b7d91143219c2c1fb883664ed13 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 9 Feb 2022 21:14:17 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add watchdog block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has the same watchdog as BCM63xx devices. Use "brcm,bcm6345-wdt"
-binding which matches the first SoC with that block.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -276,6 +276,15 @@
- 		twd: timer-mfd@400 {
- 			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
- 			reg = <0x400 0x4c>;
-+			ranges = <0x0 0x400 0x4c>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			watchdog@28 {
-+				compatible = "brcm,bcm6345-wdt";
-+				reg = <0x28 0x8>;
-+			};
- 		};
- 
- 		gpio0: gpio-controller@500 {
diff --git a/target/linux/bcm4908/patches-5.10/036-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch b/target/linux/bcm4908/patches-5.10/036-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch
deleted file mode 100644
index ab00f44b1447..000000000000
--- a/target/linux/bcm4908/patches-5.10/036-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From ba5dfa2fd8d0aed4e4b6f650ba9e8ea7cdd6ead1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 15 Feb 2022 07:36:39 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add I2C block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 uses the same I2C hw as BCM63xx / BCM67xx / BCM68xx SoCs.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -456,6 +456,15 @@
- 			};
- 		};
- 
-+		i2c@2100 {
-+			compatible = "brcm,brcmper-i2c";
-+			reg = <0x2100 0x58>;
-+			clock-frequency = <97500>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pins_i2c_a>;
-+			status = "disabled";
-+		};
-+
- 		misc@2600 {
- 			compatible = "brcm,misc", "simple-mfd";
- 			reg = <0x2600 0xe4>;
diff --git a/target/linux/bcm4908/patches-5.10/037-v5.20-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patch b/target/linux/bcm4908/patches-5.10/037-v5.20-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patch
deleted file mode 100644
index 2a1260f73b13..000000000000
--- a/target/linux/bcm4908/patches-5.10/037-v5.20-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patch
+++ /dev/null
@@ -1,199 +0,0 @@
-From 076dcedc6628c6bf92bd17bfcf8fb7b1af62bfb6 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 1 Jun 2022 15:56:51 -0700
-Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM63158
-
-Add DTS for ARMv8 based broadband SoC BCM63158. bcm63158.dtsi is the
-SoC description DTS header and bcm963158.dts is a simple DTS file for
-Broadcom BCM963158 Reference board that only enable the UART port.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/Makefile         |   1 +
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |   2 +
- .../boot/dts/broadcom/bcmbca/bcm63158.dtsi    | 128 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm963158.dts    |  30 ++++
- 4 files changed, 161 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/Makefile
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
-
---- a/arch/arm64/boot/dts/broadcom/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/Makefile
-@@ -6,5 +6,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rp
- 			      bcm2837-rpi-cm3-io3.dtb
- 
- subdir-y	+= bcm4908
-+subdir-y	+= bcmbca
- subdir-y	+= northstar2
- subdir-y	+= stingray
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -0,0 +1,2 @@
-+# SPDX-License-Identifier: GPL-2.0
-+dtb-$(CONFIG_ARCH_BCMBCA) += bcm963158.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
-@@ -0,0 +1,128 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/ {
-+	compatible = "brcm,bcm63158", "brcm,bcmbca";
-+	#address-cells = <2>;
-+	#size-cells = <2>;
-+
-+	interrupt-parent = <&gic>;
-+
-+	cpus {
-+		#address-cells = <2>;
-+		#size-cells = <0>;
-+
-+		B53_0: cpu@0 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x0>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_1: cpu@1 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x1>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_2: cpu@2 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x2>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_3: cpu@3 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x3>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		L2_0: l2-cache0 {
-+			compatible = "cache";
-+		};
-+	};
-+
-+	timer {
-+		compatible = "arm,armv8-timer";
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+	};
-+
-+	pmu: pmu {
-+		compatible = "arm,cortex-a53-pmu";
-+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-affinity = <&B53_0>, <&B53_1>,
-+			<&B53_2>, <&B53_3>;
-+	};
-+
-+	clocks: clocks {
-+		periph_clk: periph-clk {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <200000000>;
-+		};
-+		uart_clk: uart-clk {
-+			compatible = "fixed-factor-clock";
-+			#clock-cells = <0>;
-+			clocks = <&periph_clk>;
-+			clock-div = <4>;
-+			clock-mult = <1>;
-+		};
-+	};
-+
-+	psci {
-+		compatible = "arm,psci-0.2";
-+		method = "smc";
-+	};
-+
-+	axi@81000000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x0 0x0 0x81000000 0x8000>;
-+
-+		gic: interrupt-controller@1000 {
-+			compatible = "arm,gic-400";
-+			#interrupt-cells = <3>;
-+			interrupt-controller;
-+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-+			reg = <0x1000 0x1000>,
-+				<0x2000 0x2000>,
-+				<0x4000 0x2000>,
-+				<0x6000 0x2000>;
-+		};
-+	};
-+
-+	bus@ff800000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x0 0x0 0xff800000 0x800000>;
-+
-+		uart0: serial@12000 {
-+			compatible = "arm,pl011", "arm,primecell";
-+			reg = <0x12000 0x1000>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&uart_clk>, <&uart_clk>;
-+			clock-names = "uartclk", "apb_pclk";
-+			status = "disabled";
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
-@@ -0,0 +1,30 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm63158.dtsi"
-+
-+/ {
-+	model = "Broadcom BCM963158 Reference Board";
-+	compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca";
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x0 0x0 0x0 0x08000000>;
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm4908/patches-5.10/037-v5.20-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patch b/target/linux/bcm4908/patches-5.10/037-v5.20-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patch
deleted file mode 100644
index 5cdb9d1df110..000000000000
--- a/target/linux/bcm4908/patches-5.10/037-v5.20-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patch
+++ /dev/null
@@ -1,191 +0,0 @@
-From 1ba56aeb391401c4cb2126c39f90b3cdbfabdb3f Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 1 Jun 2022 13:17:34 -0700
-Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM4912
-
-Add DTS for ARMv8 based broadband SoC BCM4912. bcm4912.dtsi is the
-SoC description DTS header and bcm94912.dts is a simple DTS file for
-Broadcom BCM94912 Reference board that only enable the UART port.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |   3 +-
- .../boot/dts/broadcom/bcmbca/bcm4912.dtsi     | 128 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm94912.dts     |  30 ++++
- 3 files changed, 160 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -1,2 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
--dtb-$(CONFIG_ARCH_BCMBCA) += bcm963158.dtb
-+dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \
-+				bcm963158.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
-@@ -0,0 +1,128 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/ {
-+	compatible = "brcm,bcm4912", "brcm,bcmbca";
-+	#address-cells = <2>;
-+	#size-cells = <2>;
-+
-+	interrupt-parent = <&gic>;
-+
-+	cpus {
-+		#address-cells = <2>;
-+		#size-cells = <0>;
-+
-+		B53_0: cpu@0 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x0>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_1: cpu@1 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x1>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_2: cpu@2 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x2>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_3: cpu@3 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x3>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		L2_0: l2-cache0 {
-+			compatible = "cache";
-+		};
-+	};
-+
-+	timer {
-+		compatible = "arm,armv8-timer";
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+	};
-+
-+	pmu: pmu {
-+		compatible = "arm,cortex-a53-pmu";
-+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-affinity = <&B53_0>, <&B53_1>,
-+			<&B53_2>, <&B53_3>;
-+	};
-+
-+	clocks: clocks {
-+		periph_clk: periph-clk {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <200000000>;
-+		};
-+		uart_clk: uart-clk {
-+			compatible = "fixed-factor-clock";
-+			#clock-cells = <0>;
-+			clocks = <&periph_clk>;
-+			clock-div = <4>;
-+			clock-mult = <1>;
-+		};
-+	};
-+
-+	psci {
-+		compatible = "arm,psci-0.2";
-+		method = "smc";
-+	};
-+
-+	axi@81000000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x0 0x0 0x81000000 0x8000>;
-+
-+		gic: interrupt-controller@1000 {
-+			compatible = "arm,gic-400";
-+			#interrupt-cells = <3>;
-+			interrupt-controller;
-+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-+			reg = <0x1000 0x1000>,
-+				<0x2000 0x2000>,
-+				<0x4000 0x2000>,
-+				<0x6000 0x2000>;
-+		};
-+	};
-+
-+	bus@ff800000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x0 0x0 0xff800000 0x800000>;
-+
-+		uart0: serial@12000 {
-+			compatible = "arm,pl011", "arm,primecell";
-+			reg = <0x12000 0x1000>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&uart_clk>, <&uart_clk>;
-+			clock-names = "uartclk", "apb_pclk";
-+			status = "disabled";
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
-@@ -0,0 +1,30 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4912.dtsi"
-+
-+/ {
-+	model = "Broadcom BCM94912 Reference Board";
-+	compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca";
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x0 0x0 0x0 0x08000000>;
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm4908/patches-5.10/037-v5.20-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patch b/target/linux/bcm4908/patches-5.10/037-v5.20-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patch
deleted file mode 100644
index f10a44f89045..000000000000
--- a/target/linux/bcm4908/patches-5.10/037-v5.20-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patch
+++ /dev/null
@@ -1,184 +0,0 @@
-From e663e06bd3f21e64bc2163910f626af68add6308 Mon Sep 17 00:00:00 2001
-From: Anand Gore <anand.gore@broadcom.com>
-Date: Wed, 1 Jun 2022 13:19:56 -0700
-Subject: [PATCH] ARM64: dts: Add DTS files for bcmbca SoC BCM6858
-
-Add DTS for ARMv8 based broadband SoC BCM6858. bcm6858.dtsi is the SoC
-description DTS header and bcm96858.dts is a simple DTS file for
-Broadcom BCM96858 Reference board that only enables the UART port.
-
-Signed-off-by: Anand Gore <anand.gore@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |   3 +-
- .../boot/dts/broadcom/bcmbca/bcm6858.dtsi     | 121 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm96858.dts     |  30 +++++
- 3 files changed, 153 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -1,3 +1,4 @@
- # SPDX-License-Identifier: GPL-2.0
- dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \
--				bcm963158.dtb
-+				bcm963158.dtb \
-+				bcm96858.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-@@ -0,0 +1,121 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/ {
-+	compatible = "brcm,bcm6858", "brcm,bcmbca";
-+	#address-cells = <2>;
-+	#size-cells = <2>;
-+
-+	interrupt-parent = <&gic>;
-+
-+	cpus {
-+		#address-cells = <2>;
-+		#size-cells = <0>;
-+
-+		B53_0: cpu@0 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x0>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_1: cpu@1 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x1>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_2: cpu@2 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x2>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_3: cpu@3 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x3>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+		L2_0: l2-cache0 {
-+			compatible = "cache";
-+		};
-+	};
-+
-+	timer {
-+		compatible = "arm,armv8-timer";
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+	};
-+
-+	pmu: pmu {
-+		compatible = "arm,armv8-pmuv3";
-+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-affinity = <&B53_0>, <&B53_1>,
-+			<&B53_2>, <&B53_3>;
-+	};
-+
-+	clocks: clocks {
-+		periph_clk:periph-clk {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <200000000>;
-+		};
-+	};
-+
-+	psci {
-+		compatible = "arm,psci-0.2";
-+		method = "smc";
-+	};
-+
-+	axi@81000000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x0 0x0 0x81000000 0x8000>;
-+
-+		gic: interrupt-controller@1000 {
-+			compatible = "arm,gic-400";
-+			#interrupt-cells = <3>;
-+			interrupt-controller;
-+			reg = <0x1000 0x1000>, /* GICD */
-+				<0x2000 0x2000>, /* GICC */
-+				<0x4000 0x2000>, /* GICH */
-+				<0x6000 0x2000>; /* GICV */
-+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-+					IRQ_TYPE_LEVEL_HIGH)>;
-+		};
-+	};
-+
-+	bus@ff800000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x0 0x0 0xff800000 0x62000>;
-+
-+		uart0: serial@640 {
-+			compatible = "brcm,bcm6345-uart";
-+			reg = <0x640 0x18>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&periph_clk>;
-+			clock-names = "refclk";
-+			status = "disabled";
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
-@@ -0,0 +1,30 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm6858.dtsi"
-+
-+/ {
-+	model = "Broadcom BCM96858 Reference Board";
-+	compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca";
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x0 0x0 0x0 0x08000000>;
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm4908/patches-5.10/037-v5.20-0004-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63146.patch b/target/linux/bcm4908/patches-5.10/037-v5.20-0004-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63146.patch
deleted file mode 100644
index 793c5af7382d..000000000000
--- a/target/linux/bcm4908/patches-5.10/037-v5.20-0004-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63146.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From 82a58061ada60058ec00113c179380f945914709 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 8 Jun 2022 11:00:59 -0700
-Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM63146
-
-Add DTS for ARMv8 based broadband SoC BCM63146. bcm63146.dtsi is the
-SoC description DTS header and bcm963146.dts is a simple DTS file for
-Broadcom BCM963146 Reference board that only enable the UART port.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |   3 +-
- .../boot/dts/broadcom/bcmbca/bcm63146.dtsi    | 110 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm963146.dts    |  30 +++++
- 3 files changed, 142 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -1,4 +1,5 @@
- # SPDX-License-Identifier: GPL-2.0
- dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \
- 				bcm963158.dtb \
--				bcm96858.dtb
-+				bcm96858.dtb \
-+				bcm963146.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
-@@ -0,0 +1,110 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/ {
-+	compatible = "brcm,bcm63146", "brcm,bcmbca";
-+	#address-cells = <2>;
-+	#size-cells = <2>;
-+
-+	interrupt-parent = <&gic>;
-+
-+	cpus {
-+		#address-cells = <2>;
-+		#size-cells = <0>;
-+
-+		B53_0: cpu@0 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x0>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_1: cpu@1 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x1>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		L2_0: l2-cache0 {
-+			compatible = "cache";
-+		};
-+	};
-+
-+	timer {
-+		compatible = "arm,armv8-timer";
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-+	};
-+
-+	pmu: pmu {
-+		compatible = "arm,cortex-a53-pmu";
-+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-affinity = <&B53_0>, <&B53_1>;
-+	};
-+
-+	clocks: clocks {
-+		periph_clk: periph-clk {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <200000000>;
-+		};
-+		uart_clk: uart-clk {
-+			compatible = "fixed-factor-clock";
-+			#clock-cells = <0>;
-+			clocks = <&periph_clk>;
-+			clock-div = <4>;
-+			clock-mult = <1>;
-+		};
-+	};
-+
-+	psci {
-+		compatible = "arm,psci-0.2";
-+		method = "smc";
-+	};
-+
-+	axi@81000000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x0 0x0 0x81000000 0x8000>;
-+
-+		gic: interrupt-controller@1000 {
-+			compatible = "arm,gic-400";
-+			#interrupt-cells = <3>;
-+			interrupt-controller;
-+			reg = <0x1000 0x1000>,
-+				<0x2000 0x2000>,
-+				<0x4000 0x2000>,
-+				<0x6000 0x2000>;
-+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
-+					IRQ_TYPE_LEVEL_HIGH)>;
-+		};
-+	};
-+
-+	bus@ff800000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x0 0x0 0xff800000 0x800000>;
-+
-+		uart0: serial@12000 {
-+			compatible = "arm,pl011", "arm,primecell";
-+			reg = <0x12000 0x1000>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&uart_clk>, <&uart_clk>;
-+			clock-names = "uartclk", "apb_pclk";
-+			status = "disabled";
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
-@@ -0,0 +1,30 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm63146.dtsi"
-+
-+/ {
-+	model = "Broadcom BCM963146 Reference Board";
-+	compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca";
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x0 0x0 0x0 0x08000000>;
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm4908/patches-5.10/037-v5.20-0005-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6856.patch b/target/linux/bcm4908/patches-5.10/037-v5.20-0005-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6856.patch
deleted file mode 100644
index 0fdafb7f17de..000000000000
--- a/target/linux/bcm4908/patches-5.10/037-v5.20-0005-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6856.patch
+++ /dev/null
@@ -1,167 +0,0 @@
-From 64eca7ad058cff861b48cdead8dee40dfc284e9e Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 8 Jun 2022 11:04:36 -0700
-Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM6856
-
-Add DTS for ARMv8 based broadband SoC BCM6856. bcm6856.dtsi is the
-SoC description DTS header and bcm96856.dts is a simple DTS file for
-Broadcom BCM96956 Reference board that only enable the UART port.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |   3 +-
- .../boot/dts/broadcom/bcmbca/bcm6856.dtsi     | 103 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm96856.dts     |  30 +++++
- 3 files changed, 135 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -2,4 +2,5 @@
- dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \
- 				bcm963158.dtb \
- 				bcm96858.dtb \
--				bcm963146.dtb
-+				bcm963146.dtb \
-+				bcm96856.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
-@@ -0,0 +1,103 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/ {
-+	compatible = "brcm,bcm6856", "brcm,bcmbca";
-+	#address-cells = <2>;
-+	#size-cells = <2>;
-+
-+	interrupt-parent = <&gic>;
-+
-+	cpus {
-+		#address-cells = <2>;
-+		#size-cells = <0>;
-+
-+		B53_0: cpu@0 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x0>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_1: cpu@1 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x1>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		L2_0: l2-cache0 {
-+			compatible = "cache";
-+		};
-+	};
-+
-+	timer {
-+		compatible = "arm,armv8-timer";
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-+	};
-+
-+	pmu: pmu {
-+		compatible = "arm,cortex-a53-pmu";
-+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-affinity = <&B53_0>, <&B53_1>;
-+	};
-+
-+	clocks: clocks {
-+		periph_clk:periph-clk {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <200000000>;
-+		};
-+	};
-+
-+	psci {
-+		compatible = "arm,psci-0.2";
-+		method = "smc";
-+	};
-+
-+	axi@81000000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x0 0x0 0x81000000 0x8000>;
-+
-+		gic: interrupt-controller@1000 {
-+			compatible = "arm,gic-400";
-+			#interrupt-cells = <3>;
-+			interrupt-controller;
-+			reg = <0x1000 0x1000>, /* GICD */
-+				<0x2000 0x2000>, /* GICC */
-+				<0x4000 0x2000>, /* GICH */
-+				<0x6000 0x2000>; /* GICV */
-+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
-+					IRQ_TYPE_LEVEL_HIGH)>;
-+		};
-+	};
-+
-+	bus@ff800000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x0 0x0 0xff800000 0x800000>;
-+
-+		uart0: serial@640 {
-+			compatible = "brcm,bcm6345-uart";
-+			reg = <0x640 0x18>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&periph_clk>;
-+			clock-names = "refclk";
-+			status = "disabled";
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
-@@ -0,0 +1,30 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm6856.dtsi"
-+
-+/ {
-+	model = "Broadcom BCM96856 Reference Board";
-+	compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca";
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x0 0x0 0x0 0x08000000>;
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm4908/patches-5.10/037-v5.20-0006-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6813.patch b/target/linux/bcm4908/patches-5.10/037-v5.20-0006-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6813.patch
deleted file mode 100644
index 58af85a68cd3..000000000000
--- a/target/linux/bcm4908/patches-5.10/037-v5.20-0006-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6813.patch
+++ /dev/null
@@ -1,192 +0,0 @@
-From eab6bb0994b806525fc5e362e8b865f61c4a9e20 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Thu, 9 Jun 2022 17:15:33 -0700
-Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM6813
-
-Add DTS for ARMv8 based broadband SoC BCM6813. bcm6813.dtsi is the
-SoC description DTS header and bcm96813.dts is a simple DTS file for
-Broadcom BCM96813 Reference board that only enable the UART port.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |   3 +-
- .../boot/dts/broadcom/bcmbca/bcm6813.dtsi     | 128 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm96813.dts     |  30 ++++
- 3 files changed, 160 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -3,4 +3,5 @@ dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dt
- 				bcm963158.dtb \
- 				bcm96858.dtb \
- 				bcm963146.dtb \
--				bcm96856.dtb
-+				bcm96856.dtb \
-+				bcm96813.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
-@@ -0,0 +1,128 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/ {
-+	compatible = "brcm,bcm6813", "brcm,bcmbca";
-+	#address-cells = <2>;
-+	#size-cells = <2>;
-+
-+	interrupt-parent = <&gic>;
-+
-+	cpus {
-+		#address-cells = <2>;
-+		#size-cells = <0>;
-+
-+		B53_0: cpu@0 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x0>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_1: cpu@1 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x1>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_2: cpu@2 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x2>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		B53_3: cpu@3 {
-+			compatible = "brcm,brahma-b53";
-+			device_type = "cpu";
-+			reg = <0x0 0x3>;
-+			next-level-cache = <&L2_0>;
-+			enable-method = "psci";
-+		};
-+
-+		L2_0: l2-cache0 {
-+			compatible = "cache";
-+		};
-+	};
-+
-+	timer {
-+		compatible = "arm,armv8-timer";
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+	};
-+
-+	pmu: pmu {
-+		compatible = "arm,cortex-a53-pmu";
-+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-affinity = <&B53_0>, <&B53_1>,
-+			<&B53_2>, <&B53_3>;
-+	};
-+
-+	clocks: clocks {
-+		periph_clk: periph-clk {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <200000000>;
-+		};
-+		uart_clk: uart-clk {
-+			compatible = "fixed-factor-clock";
-+			#clock-cells = <0>;
-+			clocks = <&periph_clk>;
-+			clock-div = <4>;
-+			clock-mult = <1>;
-+		};
-+	};
-+
-+	psci {
-+		compatible = "arm,psci-0.2";
-+		method = "smc";
-+	};
-+
-+	axi@81000000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x0 0x0 0x81000000 0x8000>;
-+
-+		gic: interrupt-controller@1000 {
-+			compatible = "arm,gic-400";
-+			#interrupt-cells = <3>;
-+			interrupt-controller;
-+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-+			reg = <0x1000 0x1000>,
-+				<0x2000 0x2000>,
-+				<0x4000 0x2000>,
-+				<0x6000 0x2000>;
-+		};
-+	};
-+
-+	bus@ff800000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x0 0x0 0xff800000 0x800000>;
-+
-+		uart0: serial@12000 {
-+			compatible = "arm,pl011", "arm,primecell";
-+			reg = <0x12000 0x1000>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&uart_clk>, <&uart_clk>;
-+			clock-names = "uartclk", "apb_pclk";
-+			status = "disabled";
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
-@@ -0,0 +1,30 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm6813.dtsi"
-+
-+/ {
-+	model = "Broadcom BCM96813 Reference Board";
-+	compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca";
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x0 0x0 0x0 0x08000000>;
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm4908/patches-5.10/037-v5.20-0007-arm64-dts-broadcom-align-gpio-key-node-names-with-dt.patch b/target/linux/bcm4908/patches-5.10/037-v5.20-0007-arm64-dts-broadcom-align-gpio-key-node-names-with-dt.patch
deleted file mode 100644
index d0d6151957eb..000000000000
--- a/target/linux/bcm4908/patches-5.10/037-v5.20-0007-arm64-dts-broadcom-align-gpio-key-node-names-with-dt.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From ea559c81b61603d4044df6f826f10a832c42c98c Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Wed, 15 Jun 2022 17:52:59 -0700
-Subject: [PATCH] arm64: dts: broadcom: align gpio-key node names with dtschema
-
-The node names should be generic and DT schema expects certain pattern
-(e.g. with key/button/switch).
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Link: https://lore.kernel.org/r/20220616005333.18491-6-krzysztof.kozlowski@linaro.org
----
- .../broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts   | 8 ++++----
- .../boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts  | 8 ++++----
- 2 files changed, 8 insertions(+), 8 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-@@ -83,25 +83,25 @@
- 		compatible = "gpio-keys-polled";
- 		poll-interval = <100>;
- 
--		brightness {
-+		key-brightness {
- 			label = "LEDs";
- 			linux,code = <KEY_BRIGHTNESS_ZERO>;
- 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wps {
-+		key-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wifi {
-+		key-wifi {
- 			label = "WiFi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		key-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -18,25 +18,25 @@
- 		compatible = "gpio-keys-polled";
- 		poll-interval = <100>;
- 
--		wifi {
-+		key-wifi {
- 			label = "WiFi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wps {
-+		key-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		key-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
- 		};
- 
--		brightness {
-+		key-brightness {
- 			label = "LEDs";
- 			linux,code = <KEY_BRIGHTNESS_ZERO>;
- 			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
diff --git a/target/linux/bcm4908/patches-5.10/037-v5.20-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patch b/target/linux/bcm4908/patches-5.10/037-v5.20-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patch
deleted file mode 100644
index c2b924a0fdbf..000000000000
--- a/target/linux/bcm4908/patches-5.10/037-v5.20-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From b4a544e415e9be33b37d9bfa9d9f9f4d13f553d6 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Fri, 8 Jul 2022 11:25:06 -0700
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
-
-The cpu mask value in interrupt property inherits from bcm4908.dtsi
-which sets to four cpus. Correct the value to two cpus for dual core
-BCM4906 SoC.
-
-Fixes: c8b404fb05dc ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files")
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
-@@ -9,6 +9,14 @@
- 		/delete-node/ cpu@3;
- 	};
- 
-+	timer {
-+		compatible = "arm,armv8-timer";
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-+	};
-+
- 	pmu {
- 		compatible = "arm,cortex-a53-pmu";
- 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/target/linux/bcm4908/patches-5.10/037-v5.20-0009-arm64-dts-broadcom-bcm4908-Fix-cpu-node-for-smp-boot.patch b/target/linux/bcm4908/patches-5.10/037-v5.20-0009-arm64-dts-broadcom-bcm4908-Fix-cpu-node-for-smp-boot.patch
deleted file mode 100644
index 482fd1cc98d8..000000000000
--- a/target/linux/bcm4908/patches-5.10/037-v5.20-0009-arm64-dts-broadcom-bcm4908-Fix-cpu-node-for-smp-boot.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 8bd582ae9a71d7f14c4e0c735b2eacaf7516d626 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Fri, 8 Jul 2022 11:25:07 -0700
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
-
-Add spin-table enable-method and cpu-release-addr properties for
-cpu0 node. This is required by all ARMv8 SoC. Otherwise some
-bootloader like u-boot can not update cpu-release-addr and linux
-fails to start up secondary cpus.
-
-Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -29,6 +29,8 @@
- 			device_type = "cpu";
- 			compatible = "brcm,brahma-b53";
- 			reg = <0x0>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0xfff8>;
- 			next-level-cache = <&l2>;
- 		};
- 
diff --git a/target/linux/bcm4908/patches-5.10/037-v5.20-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patch b/target/linux/bcm4908/patches-5.10/037-v5.20-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patch
deleted file mode 100644
index 6f71c8b5fbbe..000000000000
--- a/target/linux/bcm4908/patches-5.10/037-v5.20-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From f3f575c4bef95384e68de552c7b29938fd0d9201 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 13 Jul 2022 22:03:51 +0200
-Subject: [PATCH] arm64: dts: Add base DTS file for bcmbca device Asus
- GT-AX6000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a home router with 1 GiB of RAM, 6 Ethernet ports, 2 USB ports.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: William Zhang <william.zhang@broadcom.com>
-Link: https://lore.kernel.org/r/20220713200351.28526-2-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |  4 +++-
- .../bcmbca/bcm4912-asus-gt-ax6000.dts         | 19 +++++++++++++++++++
- 2 files changed, 22 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -1,5 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
--dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \
-+dtb-$(CONFIG_ARCH_BCMBCA) += \
-+				bcm4912-asus-gt-ax6000.dtb \
-+				bcm94912.dtb \
- 				bcm963158.dtb \
- 				bcm96858.dtb \
- 				bcm963146.dtb \
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts
-@@ -0,0 +1,19 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+/dts-v1/;
-+
-+#include "bcm4912.dtsi"
-+
-+/ {
-+	compatible = "asus,gt-ax6000", "brcm,bcm4912", "brcm,bcmbca";
-+	model = "Asus GT-AX6000";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x40000000>;
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm4908/patches-5.10/037-v5.20-0011-arm64-bcmbca-add-arch-bcmbca-machine-entry.patch b/target/linux/bcm4908/patches-5.10/037-v5.20-0011-arm64-bcmbca-add-arch-bcmbca-machine-entry.patch
deleted file mode 100644
index 1b9a32e30ac9..000000000000
--- a/target/linux/bcm4908/patches-5.10/037-v5.20-0011-arm64-bcmbca-add-arch-bcmbca-machine-entry.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From fdcd652ce2b6b819f5c4dc3cead5215c84ee6933 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 1 Jun 2022 15:56:50 -0700
-Subject: [PATCH] arm64: bcmbca: add arch bcmbca machine entry
-
-Add ARCH_BCMBCA config for Broadcom Broadband SoC chipsets
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/Kconfig.platforms | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/Kconfig.platforms
-+++ b/arch/arm64/Kconfig.platforms
-@@ -59,6 +59,15 @@ config ARCH_BCM_IPROC
- 	help
- 	  This enables support for Broadcom iProc based SoCs
- 
-+config ARCH_BCMBCA
-+	bool "Broadcom Broadband SoC"
-+	help
-+	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based
-+	  BCA chipset.
-+
-+	  This enables support for Broadcom BCA ARM-based broadband chipsets,
-+	  including the DSL, PON and Wireless family of chips.
-+
- config ARCH_BERLIN
- 	bool "Marvell Berlin SoC Family"
- 	select DW_APB_ICTL
diff --git a/target/linux/bcm4908/patches-5.10/038-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch b/target/linux/bcm4908/patches-5.10/038-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch
deleted file mode 100644
index 437249f2cb33..000000000000
--- a/target/linux/bcm4908/patches-5.10/038-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 456b6dd1baadd2da10e28ffd1717b06d1fa17a97 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 18 Jul 2022 15:20:58 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add remaining LED pins
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Include all 32 pins.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20220718132100.13277-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 75 +++++++++++++++++++
- 1 file changed, 75 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -352,6 +352,61 @@
- 				groups = "led_9_grp_a";
- 			};
- 
-+			pins_led_10_a: led_10-a-pins {
-+				function = "led_10";
-+				groups = "led_10_grp_a";
-+			};
-+
-+			pins_led_11_a: led_11-a-pins {
-+				function = "led_11";
-+				groups = "led_11_grp_a";
-+			};
-+
-+			pins_led_12_a: led_12-a-pins {
-+				function = "led_12";
-+				groups = "led_12_grp_a";
-+			};
-+
-+			pins_led_13_a: led_13-a-pins {
-+				function = "led_13";
-+				groups = "led_13_grp_a";
-+			};
-+
-+			pins_led_14_a: led_14-a-pins {
-+				function = "led_14";
-+				groups = "led_14_grp_a";
-+			};
-+
-+			pins_led_15_a: led_15-a-pins {
-+				function = "led_15";
-+				groups = "led_15_grp_a";
-+			};
-+
-+			pins_led_16_a: led_16-a-pins {
-+				function = "led_16";
-+				groups = "led_16_grp_a";
-+			};
-+
-+			pins_led_17_a: led_17-a-pins {
-+				function = "led_17";
-+				groups = "led_17_grp_a";
-+			};
-+
-+			pins_led_18_a: led_18-a-pins {
-+				function = "led_18";
-+				groups = "led_18_grp_a";
-+			};
-+
-+			pins_led_19_a: led_19-a-pins {
-+				function = "led_19";
-+				groups = "led_19_grp_a";
-+			};
-+
-+			pins_led_20_a: led_20-a-pins {
-+				function = "led_20";
-+				groups = "led_20_grp_a";
-+			};
-+
- 			pins_led_21_a: led_21-a-pins {
- 				function = "led_21";
- 				groups = "led_21_grp_a";
-@@ -362,6 +417,21 @@
- 				groups = "led_22_grp_a";
- 			};
- 
-+			pins_led_23_a: led_23-a-pins {
-+				function = "led_23";
-+				groups = "led_23_grp_a";
-+			};
-+
-+			pins_led_24_a: led_24-a-pins {
-+				function = "led_24";
-+				groups = "led_24_grp_a";
-+			};
-+
-+			pins_led_25_a: led_25-a-pins {
-+				function = "led_25";
-+				groups = "led_25_grp_a";
-+			};
-+
- 			pins_led_26_a: led_26-a-pins {
- 				function = "led_26";
- 				groups = "led_26_grp_a";
-@@ -387,6 +457,11 @@
- 				groups = "led_30_grp_a";
- 			};
- 
-+			pins_led_31_a: led_31-a-pins {
-+				function = "led_31";
-+				groups = "led_31_grp_a";
-+			};
-+
- 			pins_hs_uart: hs_uart-pins {
- 				function = "hs_uart";
- 				groups = "hs_uart_grp";
diff --git a/target/linux/bcm4908/patches-5.10/038-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch b/target/linux/bcm4908/patches-5.10/038-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch
deleted file mode 100644
index c89034089341..000000000000
--- a/target/linux/bcm4908/patches-5.10/038-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 7de56b1dc1149c702d4cc1e89ccc251bfb2bc246 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 18 Jul 2022 15:20:59 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add LEDs controller block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 includes LEDs controller that supports multiple brightness
-levels & hardware blinking.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20220718132100.13277-2-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -517,6 +517,14 @@
- 			status = "okay";
- 		};
- 
-+		leds: leds@800 {
-+			compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
-+			reg = <0x800 0xdc>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
- 		nand-controller@1800 {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
diff --git a/target/linux/bcm4908/patches-5.10/038-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch b/target/linux/bcm4908/patches-5.10/038-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch
deleted file mode 100644
index 3888efb66bbf..000000000000
--- a/target/linux/bcm4908/patches-5.10/038-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 3bcae3396e986b4ab97a69e8de517e32f9691a4b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 18 Jul 2022 15:21:00 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add Asus GT-AC5300 LEDs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are 5 software-controllable LEDs on PCB.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20220718132100.13277-3-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bcm4908/bcm4908-asus-gt-ac5300.dts        | 48 +++++++++++++++++++
- 1 file changed, 48 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -2,6 +2,7 @@
- 
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
- 
- #include "bcm4908.dtsi"
- 
-@@ -118,6 +119,53 @@
- 	};
- };
- 
-+&leds {
-+	led-power@11 {
-+		reg = <0x11>;
-+		function = LED_FUNCTION_POWER;
-+		color = <LED_COLOR_ID_WHITE>;
-+		default-state = "on";
-+		active-low;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pins_led_17_a>;
-+	};
-+
-+	led-wan-red@12 {
-+		reg = <0x12>;
-+		function = LED_FUNCTION_WAN;
-+		color = <LED_COLOR_ID_RED>;
-+		active-low;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pins_led_18_a>;
-+	};
-+
-+	led-wps@14 {
-+		reg = <0x14>;
-+		function = LED_FUNCTION_WPS;
-+		color = <LED_COLOR_ID_WHITE>;
-+		active-low;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pins_led_20_a>;
-+	};
-+
-+	led-wan-white@15 {
-+		reg = <0x15>;
-+		function = LED_FUNCTION_WAN;
-+		color = <LED_COLOR_ID_WHITE>;
-+		active-low;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pins_led_21_a>;
-+	};
-+
-+	led-lan@19 {
-+		reg = <0x19>;
-+		function = LED_FUNCTION_LAN;
-+		color = <LED_COLOR_ID_WHITE>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pins_led_25_a>;
-+	};
-+};
-+
- &nandcs {
- 	nand-ecc-strength = <4>;
- 	nand-ecc-step-size = <512>;
diff --git a/target/linux/bcm4908/patches-5.10/038-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch b/target/linux/bcm4908/patches-5.10/038-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch
deleted file mode 100644
index d4b7a983deac..000000000000
--- a/target/linux/bcm4908/patches-5.10/038-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 4fdcbde682291fba2c3f45a41decd656d92a314f Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 3 Aug 2022 10:54:49 -0700
-Subject: [PATCH] arm64: dts: bcmbca: update BCM4908 board dts files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Append "brcm,bcmbca" to compatible strings based on the new bcmbca
-binding rule for BCM4908 family based boards.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20220803175455.47638-4-william.zhang@broadcom.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 2 +-
- .../dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts     | 2 +-
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 2 +-
- .../arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts | 2 +-
- 4 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -7,7 +7,7 @@
- #include "bcm4906.dtsi"
- 
- / {
--	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908";
-+	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
- 	model = "Netgear R8000P";
- 
- 	memory@0 {
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-@@ -7,7 +7,7 @@
- #include "bcm4906.dtsi"
- 
- / {
--	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908";
-+	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
- 	model = "TP-Link Archer C2300 V1";
- 
- 	memory@0 {
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -7,7 +7,7 @@
- #include "bcm4908.dtsi"
- 
- / {
--	compatible = "asus,gt-ac5300", "brcm,bcm4908";
-+	compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
- 	model = "Asus GT-AC5300";
- 
- 	memory@0 {
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
-@@ -3,7 +3,7 @@
- #include "bcm4908.dtsi"
- 
- / {
--	compatible = "netgear,raxe500", "brcm,bcm4908";
-+	compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
- 	model = "Netgear RAXE500";
- 
- 	memory@0 {
diff --git a/target/linux/bcm4908/patches-5.10/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch b/target/linux/bcm4908/patches-5.10/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch
deleted file mode 100644
index 70484ab93f0f..000000000000
--- a/target/linux/bcm4908/patches-5.10/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch
+++ /dev/null
@@ -1,2491 +0,0 @@
-From ded8f22945899f4e87dd6d952bbc4abce6e64b7e Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 3 Aug 2022 10:54:50 -0700
-Subject: [PATCH] arm64: dts: Move BCM4908 dts to bcmbca folder
-
-As part of ARCH_BCM4908 to ARCH_BCMBCA migration, move the BCM4908 dts
-files to bcmbca folder and use CONFIG_ARCH_BCMBCA to build all the
-BCM4908 board dts. Delete bcm4908 folder and its makefile as well.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Link: https://lore.kernel.org/r/20220803175455.47638-5-william.zhang@broadcom.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/Makefile                        | 1 -
- arch/arm64/boot/dts/broadcom/bcm4908/Makefile                | 5 -----
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile                 | 4 ++++
- .../broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts  | 0
- .../{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts   | 0
- .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi | 0
- .../broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts  | 0
- .../broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts | 0
- .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi | 0
- 9 files changed, 4 insertions(+), 6 deletions(-)
- delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
- rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (100%)
- rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (100%)
- rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%)
- rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (100%)
- rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (100%)
- rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%)
-
---- a/arch/arm64/boot/dts/broadcom/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/Makefile
-@@ -5,7 +5,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rp
- 			      bcm2837-rpi-3-b-plus.dtb \
- 			      bcm2837-rpi-cm3-io3.dtb
- 
--subdir-y	+= bcm4908
- subdir-y	+= bcmbca
- subdir-y	+= northstar2
- subdir-y	+= stingray
---- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-+++ /dev/null
-@@ -1,5 +0,0 @@
--# SPDX-License-Identifier: GPL-2.0
--dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
--dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
--dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
--dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -1,5 +1,9 @@
- # SPDX-License-Identifier: GPL-2.0
- dtb-$(CONFIG_ARCH_BCMBCA) += \
-+				bcm4906-netgear-r8000p.dtb \
-+				bcm4906-tplink-archer-c2300-v1.dtb \
-+				bcm4908-asus-gt-ac5300.dtb \
-+				bcm4908-netgear-raxe500.dtb \
- 				bcm4912-asus-gt-ax6000.dtb \
- 				bcm94912.dtb \
- 				bcm963158.dtb \
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ /dev/null
-@@ -1,157 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
--
--#include <dt-bindings/gpio/gpio.h>
--#include <dt-bindings/input/input.h>
--#include <dt-bindings/leds/common.h>
--
--#include "bcm4906.dtsi"
--
--/ {
--	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
--	model = "Netgear R8000P";
--
--	memory@0 {
--		device_type = "memory";
--		reg = <0x00 0x00 0x00 0x20000000>;
--	};
--
--	leds {
--		compatible = "gpio-leds";
--
--		led-power-white {
--			function = LED_FUNCTION_POWER;
--			color = <LED_COLOR_ID_WHITE>;
--			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
--		};
--
--		led-power-amber {
--			function = LED_FUNCTION_POWER;
--			color = <LED_COLOR_ID_AMBER>;
--			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
--		};
--
--		led-wps {
--			function = LED_FUNCTION_WPS;
--			color = <LED_COLOR_ID_WHITE>;
--			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
--		};
--
--		led-2ghz {
--			function = "2ghz";
--			color = <LED_COLOR_ID_WHITE>;
--			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
--		};
--
--		led-5ghz-1 {
--			function = "5ghz-1";
--			color = <LED_COLOR_ID_WHITE>;
--			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
--		};
--
--		led-5ghz-2 {
--			function = "5ghz-2";
--			color = <LED_COLOR_ID_WHITE>;
--			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
--		};
--
--		led-usb2 {
--			function = "usb2";
--			color = <LED_COLOR_ID_WHITE>;
--			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
--		};
--
--		led-usb3 {
--			function = "usb3";
--			color = <LED_COLOR_ID_WHITE>;
--			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
--		};
--
--		led-wifi {
--			function = "wifi";
--			color = <LED_COLOR_ID_WHITE>;
--			gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
--		};
--	};
--};
--
--&enet {
--	nvmem-cells = <&base_mac_addr>;
--	nvmem-cell-names = "mac-address";
--};
--
--&usb_phy {
--	brcm,ioc = <1>;
--	status = "okay";
--};
--
--&ehci {
--	status = "okay";
--};
--
--&ohci {
--	status = "okay";
--};
--
--&xhci {
--	status = "okay";
--};
--
--&ports {
--	port@0 {
--		label = "lan4";
--	};
--
--	port@1 {
--		label = "lan3";
--	};
--
--	port@2 {
--		label = "lan2";
--	};
--
--	port@3 {
--		label = "lan1";
--	};
--
--	port@7 {
--		reg = <7>;
--		phy-mode = "internal";
--		phy-handle = <&phy12>;
--		label = "wan";
--	};
--};
--
--&nandcs {
--	nand-ecc-strength = <4>;
--	nand-ecc-step-size = <512>;
--	nand-on-flash-bbt;
--
--	#address-cells = <1>;
--	#size-cells = <0>;
--
--	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <1>;
--		#size-cells = <1>;
--
--		partition@0 {
--			compatible = "nvmem-cells";
--			label = "cferom";
--			reg = <0x0 0x100000>;
--
--			#address-cells = <1>;
--			#size-cells = <1>;
--			ranges = <0 0x0 0x100000>;
--
--			base_mac_addr: mac@106a0 {
--				reg = <0x106a0 0x6>;
--			};
--		};
--
--		partition@100000 {
--			compatible = "brcm,bcm4908-firmware";
--			label = "firmware";
--			reg = <0x100000 0x4400000>;
--		};
--	};
--};
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-+++ /dev/null
-@@ -1,182 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
--
--#include <dt-bindings/gpio/gpio.h>
--#include <dt-bindings/input/input.h>
--#include <dt-bindings/leds/common.h>
--
--#include "bcm4906.dtsi"
--
--/ {
--	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
--	model = "TP-Link Archer C2300 V1";
--
--	memory@0 {
--		device_type = "memory";
--		reg = <0x00 0x00 0x00 0x20000000>;
--	};
--
--	leds {
--		compatible = "gpio-leds";
--
--		led-power {
--			function = LED_FUNCTION_POWER;
--			color = <LED_COLOR_ID_BLUE>;
--			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
--		};
--
--		led-2ghz {
--			function = "2ghz";
--			color = <LED_COLOR_ID_BLUE>;
--			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
--		};
--
--		led-5ghz {
--			function = "5ghz";
--			color = <LED_COLOR_ID_BLUE>;
--			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
--		};
--
--		led-wan-amber {
--			function = LED_FUNCTION_WAN;
--			color = <LED_COLOR_ID_AMBER>;
--			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
--		};
--
--		led-wan-blue {
--			function = LED_FUNCTION_WAN;
--			color = <LED_COLOR_ID_BLUE>;
--			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
--		};
--
--		led-lan {
--			function = LED_FUNCTION_LAN;
--			color = <LED_COLOR_ID_BLUE>;
--			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
--		};
--
--		led-wps {
--			function = LED_FUNCTION_WPS;
--			color = <LED_COLOR_ID_BLUE>;
--			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
--		};
--
--		led-usb2 {
--			function = "usb2";
--			color = <LED_COLOR_ID_BLUE>;
--			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
--		};
--
--		led-usb3 {
--			function = "usbd3";
--			color = <LED_COLOR_ID_BLUE>;
--			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
--		};
--
--		led-brightness {
--			function = LED_FUNCTION_BACKLIGHT;
--			color = <LED_COLOR_ID_WHITE>;
--			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
--		};
--	};
--
--	gpio-keys-polled {
--		compatible = "gpio-keys-polled";
--		poll-interval = <100>;
--
--		key-brightness {
--			label = "LEDs";
--			linux,code = <KEY_BRIGHTNESS_ZERO>;
--			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
--		};
--
--		key-wps {
--			label = "WPS";
--			linux,code = <KEY_WPS_BUTTON>;
--			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
--		};
--
--		key-wifi {
--			label = "WiFi";
--			linux,code = <KEY_RFKILL>;
--			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
--		};
--
--		key-restart {
--			label = "Reset";
--			linux,code = <KEY_RESTART>;
--			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
--		};
--	};
--};
--
--&usb_phy {
--	brcm,ioc = <1>;
--	status = "okay";
--};
--
--&ehci {
--	status = "okay";
--};
--
--&ohci {
--	status = "okay";
--};
--
--&xhci {
--	status = "okay";
--};
--
--&ports {
--	port@0 {
--		label = "lan4";
--	};
--
--	port@1 {
--		label = "lan3";
--	};
--
--	port@2 {
--		label = "lan2";
--	};
--
--	port@3 {
--		label = "lan1";
--	};
--
--	port@7 {
--		reg = <7>;
--		phy-mode = "internal";
--		phy-handle = <&phy12>;
--		label = "wan";
--	};
--};
--
--&nandcs {
--	nand-ecc-strength = <4>;
--	nand-ecc-step-size = <512>;
--	nand-on-flash-bbt;
--
--	#address-cells = <1>;
--	#size-cells = <0>;
--
--	partitions {
--		compatible = "brcm,bcm4908-partitions";
--		#address-cells = <1>;
--		#size-cells = <1>;
--
--		partition@0 {
--			label = "cferom";
--			reg = <0x0 0x100000>;
--		};
--
--		partition@100000 {
--			compatible = "brcm,bcm4908-firmware";
--			reg = <0x100000 0x3900000>;
--		};
--
--		partition@5800000 {
--			compatible = "brcm,bcm4908-firmware";
--			reg = <0x3a00000 0x3900000>;
--		};
--	};
--};
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
-+++ /dev/null
-@@ -1,26 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
--
--#include "bcm4908.dtsi"
--
--/ {
--	cpus {
--		/delete-node/ cpu@2;
--
--		/delete-node/ cpu@3;
--	};
--
--	timer {
--		compatible = "arm,armv8-timer";
--		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
--			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
--			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
--			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
--	};
--
--	pmu {
--		compatible = "arm,cortex-a53-pmu";
--		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
--			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
--		interrupt-affinity = <&cpu0>, <&cpu1>;
--	};
--};
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ /dev/null
-@@ -1,207 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
--
--#include <dt-bindings/gpio/gpio.h>
--#include <dt-bindings/input/input.h>
--#include <dt-bindings/leds/common.h>
--
--#include "bcm4908.dtsi"
--
--/ {
--	compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
--	model = "Asus GT-AC5300";
--
--	memory@0 {
--		device_type = "memory";
--		reg = <0x00 0x00 0x00 0x40000000>;
--	};
--
--	gpio-keys-polled {
--		compatible = "gpio-keys-polled";
--		poll-interval = <100>;
--
--		key-wifi {
--			label = "WiFi";
--			linux,code = <KEY_RFKILL>;
--			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
--		};
--
--		key-wps {
--			label = "WPS";
--			linux,code = <KEY_WPS_BUTTON>;
--			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
--		};
--
--		key-restart {
--			label = "Reset";
--			linux,code = <KEY_RESTART>;
--			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
--		};
--
--		key-brightness {
--			label = "LEDs";
--			linux,code = <KEY_BRIGHTNESS_ZERO>;
--			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
--		};
--	};
--};
--
--&enet {
--	nvmem-cells = <&base_mac_addr>;
--	nvmem-cell-names = "mac-address";
--};
--
--&usb_phy {
--	brcm,ioc = <1>;
--	status = "okay";
--};
--
--&ehci {
--	status = "okay";
--};
--
--&ohci {
--	status = "okay";
--};
--
--&xhci {
--	status = "okay";
--};
--
--&ports {
--	port@0 {
--		label = "lan2";
--	};
--
--	port@1 {
--		label = "lan1";
--	};
--
--	port@2 {
--		label = "lan6";
--	};
--
--	port@3 {
--		label = "lan5";
--	};
--
--	/* External BCM53134S switch */
--	port@7 {
--		label = "sw";
--		reg = <7>;
--		phy-mode = "rgmii";
--
--		fixed-link {
--			speed = <1000>;
--			full-duplex;
--		};
--	};
--};
--
--&mdio {
--	/* lan8 */
--	ethernet-phy@0 {
--		reg = <0>;
--	};
--
--	/* lan7 */
--	ethernet-phy@1 {
--		reg = <1>;
--	};
--
--	/* lan4 */
--	ethernet-phy@2 {
--		reg = <2>;
--	};
--
--	/* lan3 */
--	ethernet-phy@3 {
--		reg = <3>;
--	};
--};
--
--&leds {
--	led-power@11 {
--		reg = <0x11>;
--		function = LED_FUNCTION_POWER;
--		color = <LED_COLOR_ID_WHITE>;
--		default-state = "on";
--		active-low;
--		pinctrl-names = "default";
--		pinctrl-0 = <&pins_led_17_a>;
--	};
--
--	led-wan-red@12 {
--		reg = <0x12>;
--		function = LED_FUNCTION_WAN;
--		color = <LED_COLOR_ID_RED>;
--		active-low;
--		pinctrl-names = "default";
--		pinctrl-0 = <&pins_led_18_a>;
--	};
--
--	led-wps@14 {
--		reg = <0x14>;
--		function = LED_FUNCTION_WPS;
--		color = <LED_COLOR_ID_WHITE>;
--		active-low;
--		pinctrl-names = "default";
--		pinctrl-0 = <&pins_led_20_a>;
--	};
--
--	led-wan-white@15 {
--		reg = <0x15>;
--		function = LED_FUNCTION_WAN;
--		color = <LED_COLOR_ID_WHITE>;
--		active-low;
--		pinctrl-names = "default";
--		pinctrl-0 = <&pins_led_21_a>;
--	};
--
--	led-lan@19 {
--		reg = <0x19>;
--		function = LED_FUNCTION_LAN;
--		color = <LED_COLOR_ID_WHITE>;
--		pinctrl-names = "default";
--		pinctrl-0 = <&pins_led_25_a>;
--	};
--};
--
--&nandcs {
--	nand-ecc-strength = <4>;
--	nand-ecc-step-size = <512>;
--	nand-on-flash-bbt;
--	brcm,nand-has-wp;
--
--	#address-cells = <1>;
--	#size-cells = <0>;
--
--	partitions {
--		compatible = "brcm,bcm4908-partitions";
--		#address-cells = <1>;
--		#size-cells = <1>;
--
--		partition@0 {
--			compatible = "nvmem-cells";
--			label = "cferom";
--			reg = <0x0 0x100000>;
--
--			#address-cells = <1>;
--			#size-cells = <1>;
--			ranges = <0 0x0 0x100000>;
--
--			base_mac_addr: mac@106a0 {
--				reg = <0x106a0 0x6>;
--			};
--		};
--
--		partition@100000 {
--			compatible = "brcm,bcm4908-firmware";
--			reg = <0x100000 0x5700000>;
--		};
--
--		partition@5800000 {
--			compatible = "brcm,bcm4908-firmware";
--			reg = <0x5800000 0x5700000>;
--		};
--	};
--};
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
-+++ /dev/null
-@@ -1,50 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
--
--#include "bcm4908.dtsi"
--
--/ {
--	compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
--	model = "Netgear RAXE500";
--
--	memory@0 {
--		device_type = "memory";
--		reg = <0x00 0x00 0x00 0x40000000>;
--	};
--};
--
--&ehci {
--	status = "okay";
--};
--
--&ohci {
--	status = "okay";
--};
--
--&xhci {
--	status = "okay";
--};
--
--&ports {
--	port@0 {
--		label = "lan4";
--	};
--
--	port@1 {
--		label = "lan3";
--	};
--
--	port@2 {
--		label = "lan2";
--	};
--
--	port@3 {
--		label = "lan1";
--	};
--
--	port@7 {
--		reg = <7>;
--		phy-mode = "internal";
--		phy-handle = <&phy12>;
--		label = "wan";
--	};
--};
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ /dev/null
-@@ -1,575 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
--
--#include <dt-bindings/interrupt-controller/irq.h>
--#include <dt-bindings/interrupt-controller/arm-gic.h>
--#include <dt-bindings/phy/phy.h>
--#include <dt-bindings/soc/bcm-pmb.h>
--
--/dts-v1/;
--
--/ {
--	interrupt-parent = <&gic>;
--
--	#address-cells = <2>;
--	#size-cells = <2>;
--
--	aliases {
--		serial0 = &uart0;
--	};
--
--	chosen {
--		stdout-path = "serial0:115200n8";
--	};
--
--	cpus {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
--		cpu0: cpu@0 {
--			device_type = "cpu";
--			compatible = "brcm,brahma-b53";
--			reg = <0x0>;
--			enable-method = "spin-table";
--			cpu-release-addr = <0x0 0xfff8>;
--			next-level-cache = <&l2>;
--		};
--
--		cpu1: cpu@1 {
--			device_type = "cpu";
--			compatible = "brcm,brahma-b53";
--			reg = <0x1>;
--			enable-method = "spin-table";
--			cpu-release-addr = <0x0 0xfff8>;
--			next-level-cache = <&l2>;
--		};
--
--		cpu2: cpu@2 {
--			device_type = "cpu";
--			compatible = "brcm,brahma-b53";
--			reg = <0x2>;
--			enable-method = "spin-table";
--			cpu-release-addr = <0x0 0xfff8>;
--			next-level-cache = <&l2>;
--		};
--
--		cpu3: cpu@3 {
--			device_type = "cpu";
--			compatible = "brcm,brahma-b53";
--			reg = <0x3>;
--			enable-method = "spin-table";
--			cpu-release-addr = <0x0 0xfff8>;
--			next-level-cache = <&l2>;
--		};
--
--		l2: l2-cache0 {
--			compatible = "cache";
--		};
--	};
--
--	axi@81000000 {
--		compatible = "simple-bus";
--		#address-cells = <1>;
--		#size-cells = <1>;
--		ranges = <0x00 0x00 0x81000000 0x4000>;
--
--		gic: interrupt-controller@1000 {
--			compatible = "arm,gic-400";
--			#interrupt-cells = <3>;
--			#address-cells = <0>;
--			interrupt-controller;
--			reg = <0x1000 0x1000>,
--			      <0x2000 0x2000>;
--		};
--	};
--
--	timer {
--		compatible = "arm,armv8-timer";
--		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
--			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
--			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
--			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
--	};
--
--	pmu {
--		compatible = "arm,cortex-a53-pmu";
--		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
--			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
--			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
--			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
--		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
--	};
--
--	clocks {
--		periph_clk: periph_clk {
--			compatible = "fixed-clock";
--			#clock-cells = <0>;
--			clock-frequency = <50000000>;
--			clock-output-names = "periph";
--		};
--	};
--
--	soc {
--		compatible = "simple-bus";
--		#address-cells = <1>;
--		#size-cells = <1>;
--		ranges = <0x00 0x00 0x80000000 0x281000>;
--
--		enet: ethernet@2000 {
--			compatible = "brcm,bcm4908-enet";
--			reg = <0x2000 0x1000>;
--
--			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
--				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
--			interrupt-names = "rx", "tx";
--		};
--
--		usb_phy: usb-phy@c200 {
--			compatible = "brcm,bcm4908-usb-phy";
--			reg = <0xc200 0x100>;
--			reg-names = "ctrl";
--			power-domains = <&pmb BCM_PMB_HOST_USB>;
--			dr_mode = "host";
--			brcm,has-xhci;
--			brcm,has-eohci;
--			#phy-cells = <1>;
--			status = "disabled";
--		};
--
--		ehci: usb@c300 {
--			compatible = "generic-ehci";
--			reg = <0xc300 0x100>;
--			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
--			phys = <&usb_phy PHY_TYPE_USB2>;
--			status = "disabled";
--		};
--
--		ohci: usb@c400 {
--			compatible = "generic-ohci";
--			reg = <0xc400 0x100>;
--			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
--			phys = <&usb_phy PHY_TYPE_USB2>;
--			status = "disabled";
--		};
--
--		xhci: usb@d000 {
--			compatible = "generic-xhci";
--			reg = <0xd000 0x8c8>;
--			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
--			phys = <&usb_phy PHY_TYPE_USB3>;
--			status = "disabled";
--		};
--
--		bus@80000 {
--			compatible = "simple-bus";
--			#size-cells = <1>;
--			#address-cells = <1>;
--			ranges = <0 0x80000 0x50000>;
--
--			ethernet-switch@0 {
--				compatible = "brcm,bcm4908-switch";
--				reg = <0x0 0x40000>,
--				      <0x40000 0x110>,
--				      <0x40340 0x30>,
--				      <0x40380 0x30>,
--				      <0x40600 0x34>,
--				      <0x40800 0x208>;
--				reg-names = "core", "reg", "intrl2_0",
--					    "intrl2_1", "fcb", "acb";
--				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
--					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
--				brcm,num-gphy = <5>;
--				brcm,num-rgmii-ports = <2>;
--
--				#address-cells = <1>;
--				#size-cells = <0>;
--
--				ports: ports {
--					#address-cells = <1>;
--					#size-cells = <0>;
--
--					port@0 {
--						reg = <0>;
--						phy-mode = "internal";
--						phy-handle = <&phy8>;
--					};
--
--					port@1 {
--						reg = <1>;
--						phy-mode = "internal";
--						phy-handle = <&phy9>;
--					};
--
--					port@2 {
--						reg = <2>;
--						phy-mode = "internal";
--						phy-handle = <&phy10>;
--					};
--
--					port@3 {
--						reg = <3>;
--						phy-mode = "internal";
--						phy-handle = <&phy11>;
--					};
--
--					port@8 {
--						reg = <8>;
--						phy-mode = "internal";
--						ethernet = <&enet>;
--
--						fixed-link {
--							speed = <1000>;
--							full-duplex;
--						};
--					};
--				};
--			};
--
--			mdio: mdio@405c0 {
--				compatible = "brcm,unimac-mdio";
--				reg = <0x405c0 0x8>;
--				reg-names = "mdio";
--				#size-cells = <0>;
--				#address-cells = <1>;
--
--				phy8: ethernet-phy@8 {
--					reg = <8>;
--				};
--
--				phy9: ethernet-phy@9 {
--					reg = <9>;
--				};
--
--				phy10: ethernet-phy@a {
--					reg = <10>;
--				};
--
--				phy11: ethernet-phy@b {
--					reg = <11>;
--				};
--
--				phy12: ethernet-phy@c {
--					reg = <12>;
--				};
--			};
--		};
--
--		procmon: syscon@280000 {
--			compatible = "simple-bus";
--			reg = <0x280000 0x1000>;
--			ranges;
--
--			#address-cells = <1>;
--			#size-cells = <1>;
--
--			pmb: power-controller@2800c0 {
--				compatible = "brcm,bcm4908-pmb";
--				reg = <0x2800c0 0x40>;
--				#power-domain-cells = <1>;
--			};
--		};
--	};
--
--	bus@ff800000 {
--		compatible = "simple-bus";
--		#address-cells = <1>;
--		#size-cells = <1>;
--		ranges = <0x00 0x00 0xff800000 0x3000>;
--
--		twd: timer-mfd@400 {
--			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
--			reg = <0x400 0x4c>;
--			ranges = <0x0 0x400 0x4c>;
--
--			#address-cells = <1>;
--			#size-cells = <1>;
--
--			watchdog@28 {
--				compatible = "brcm,bcm6345-wdt";
--				reg = <0x28 0x8>;
--			};
--		};
--
--		gpio0: gpio-controller@500 {
--			compatible = "brcm,bcm6345-gpio";
--			reg-names = "dirout", "dat";
--			reg = <0x500 0x28>, <0x528 0x28>;
--
--			#gpio-cells = <2>;
--			gpio-controller;
--		};
--
--		pinctrl@560 {
--			compatible = "brcm,bcm4908-pinctrl";
--			reg = <0x560 0x10>;
--
--			pins_led_0_a: led_0-a-pins {
--				function = "led_0";
--				groups = "led_0_grp_a";
--			};
--
--			pins_led_1_a: led_1-a-pins {
--				function = "led_1";
--				groups = "led_1_grp_a";
--			};
--
--			pins_led_2_a: led_2-a-pins {
--				function = "led_2";
--				groups = "led_2_grp_a";
--			};
--
--			pins_led_3_a: led_3-a-pins {
--				function = "led_3";
--				groups = "led_3_grp_a";
--			};
--
--			pins_led_4_a: led_4-a-pins {
--				function = "led_4";
--				groups = "led_4_grp_a";
--			};
--
--			pins_led_5_a: led_5-a-pins {
--				function = "led_5";
--				groups = "led_5_grp_a";
--			};
--
--			pins_led_6_a: led_6-a-pins {
--				function = "led_6";
--				groups = "led_6_grp_a";
--			};
--
--			pins_led_7_a: led_7-a-pins {
--				function = "led_7";
--				groups = "led_7_grp_a";
--			};
--
--			pins_led_8_a: led_8-a-pins {
--				function = "led_8";
--				groups = "led_8_grp_a";
--			};
--
--			pins_led_9_a: led_9-a-pins {
--				function = "led_9";
--				groups = "led_9_grp_a";
--			};
--
--			pins_led_10_a: led_10-a-pins {
--				function = "led_10";
--				groups = "led_10_grp_a";
--			};
--
--			pins_led_11_a: led_11-a-pins {
--				function = "led_11";
--				groups = "led_11_grp_a";
--			};
--
--			pins_led_12_a: led_12-a-pins {
--				function = "led_12";
--				groups = "led_12_grp_a";
--			};
--
--			pins_led_13_a: led_13-a-pins {
--				function = "led_13";
--				groups = "led_13_grp_a";
--			};
--
--			pins_led_14_a: led_14-a-pins {
--				function = "led_14";
--				groups = "led_14_grp_a";
--			};
--
--			pins_led_15_a: led_15-a-pins {
--				function = "led_15";
--				groups = "led_15_grp_a";
--			};
--
--			pins_led_16_a: led_16-a-pins {
--				function = "led_16";
--				groups = "led_16_grp_a";
--			};
--
--			pins_led_17_a: led_17-a-pins {
--				function = "led_17";
--				groups = "led_17_grp_a";
--			};
--
--			pins_led_18_a: led_18-a-pins {
--				function = "led_18";
--				groups = "led_18_grp_a";
--			};
--
--			pins_led_19_a: led_19-a-pins {
--				function = "led_19";
--				groups = "led_19_grp_a";
--			};
--
--			pins_led_20_a: led_20-a-pins {
--				function = "led_20";
--				groups = "led_20_grp_a";
--			};
--
--			pins_led_21_a: led_21-a-pins {
--				function = "led_21";
--				groups = "led_21_grp_a";
--			};
--
--			pins_led_22_a: led_22-a-pins {
--				function = "led_22";
--				groups = "led_22_grp_a";
--			};
--
--			pins_led_23_a: led_23-a-pins {
--				function = "led_23";
--				groups = "led_23_grp_a";
--			};
--
--			pins_led_24_a: led_24-a-pins {
--				function = "led_24";
--				groups = "led_24_grp_a";
--			};
--
--			pins_led_25_a: led_25-a-pins {
--				function = "led_25";
--				groups = "led_25_grp_a";
--			};
--
--			pins_led_26_a: led_26-a-pins {
--				function = "led_26";
--				groups = "led_26_grp_a";
--			};
--
--			pins_led_27_a: led_27-a-pins {
--				function = "led_27";
--				groups = "led_27_grp_a";
--			};
--
--			pins_led_28_a: led_28-a-pins {
--				function = "led_28";
--				groups = "led_28_grp_a";
--			};
--
--			pins_led_29_a: led_29-a-pins {
--				function = "led_29";
--				groups = "led_29_grp_a";
--			};
--
--			pins_led_30_a: led_30-a-pins {
--				function = "led_30";
--				groups = "led_30_grp_a";
--			};
--
--			pins_led_31_a: led_31-a-pins {
--				function = "led_31";
--				groups = "led_31_grp_a";
--			};
--
--			pins_hs_uart: hs_uart-pins {
--				function = "hs_uart";
--				groups = "hs_uart_grp";
--			};
--
--			pins_i2c_a: i2c-a-pins {
--				function = "i2c";
--				groups = "i2c_grp_a";
--			};
--
--			pins_i2c_b: i2c-b-pins {
--				function = "i2c";
--				groups = "i2c_grp_b";
--			};
--
--			pins_i2s: i2s-pins {
--				function = "i2s";
--				groups = "i2s_grp";
--			};
--
--			pins_nand_ctrl: nand_ctrl-pins {
--				function = "nand_ctrl";
--				groups = "nand_ctrl_grp";
--			};
--
--			pins_nand_data: nand_data-pins {
--				function = "nand_data";
--				groups = "nand_data_grp";
--			};
--
--			pins_emmc_ctrl: emmc_ctrl-pins {
--				function = "emmc_ctrl";
--				groups = "emmc_ctrl_grp";
--			};
--
--			pins_usb0_pwr: usb0_pwr-pins {
--				function = "usb0_pwr";
--				groups = "usb0_pwr_grp";
--			};
--
--			pins_usb1_pwr: usb1_pwr-pins {
--				function = "usb1_pwr";
--				groups = "usb1_pwr_grp";
--			};
--		};
--
--		uart0: serial@640 {
--			compatible = "brcm,bcm6345-uart";
--			reg = <0x640 0x18>;
--			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
--			clocks = <&periph_clk>;
--			clock-names = "refclk";
--			status = "okay";
--		};
--
--		leds: leds@800 {
--			compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
--			reg = <0x800 0xdc>;
--
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--
--		nand-controller@1800 {
--			#address-cells = <1>;
--			#size-cells = <0>;
--			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
--			reg = <0x1800 0x600>, <0x2000 0x10>;
--			reg-names = "nand", "nand-int-base";
--			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
--			interrupt-names = "nand";
--			status = "okay";
--
--			nandcs: nand@0 {
--				compatible = "brcm,nandcs";
--				reg = <0>;
--			};
--		};
--
--		i2c@2100 {
--			compatible = "brcm,brcmper-i2c";
--			reg = <0x2100 0x58>;
--			clock-frequency = <97500>;
--			pinctrl-names = "default";
--			pinctrl-0 = <&pins_i2c_a>;
--			status = "disabled";
--		};
--
--		misc@2600 {
--			compatible = "brcm,misc", "simple-mfd";
--			reg = <0x2600 0xe4>;
--
--			#address-cells = <1>;
--			#size-cells = <1>;
--			ranges = <0x00 0x2600 0xe4>;
--
--			reset-controller@2644 {
--				compatible = "brcm,bcm4908-misc-pcie-reset";
--				reg = <0x44 0x04>;
--				#reset-cells = <1>;
--			};
--		};
--	};
--
--	reboot {
--		compatible = "syscon-reboot";
--		regmap = <&twd>;
--		offset = <0x34>;
--		mask = <1>;
--	};
--};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
-@@ -0,0 +1,157 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+
-+#include "bcm4906.dtsi"
-+
-+/ {
-+	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
-+	model = "Netgear R8000P";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x20000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led-power-white {
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-power-amber {
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-wps {
-+			function = LED_FUNCTION_WPS;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-2ghz {
-+			function = "2ghz";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-5ghz-1 {
-+			function = "5ghz-1";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-5ghz-2 {
-+			function = "5ghz-2";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb2 {
-+			function = "usb2";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb3 {
-+			function = "usb3";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-wifi {
-+			function = "wifi";
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&enet {
-+	nvmem-cells = <&base_mac_addr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
-+&usb_phy {
-+	brcm,ioc = <1>;
-+	status = "okay";
-+};
-+
-+&ehci {
-+	status = "okay";
-+};
-+
-+&ohci {
-+	status = "okay";
-+};
-+
-+&xhci {
-+	status = "okay";
-+};
-+
-+&ports {
-+	port@0 {
-+		label = "lan4";
-+	};
-+
-+	port@1 {
-+		label = "lan3";
-+	};
-+
-+	port@2 {
-+		label = "lan2";
-+	};
-+
-+	port@3 {
-+		label = "lan1";
-+	};
-+
-+	port@7 {
-+		reg = <7>;
-+		phy-mode = "internal";
-+		phy-handle = <&phy12>;
-+		label = "wan";
-+	};
-+};
-+
-+&nandcs {
-+	nand-ecc-strength = <4>;
-+	nand-ecc-step-size = <512>;
-+	nand-on-flash-bbt;
-+
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			compatible = "nvmem-cells";
-+			label = "cferom";
-+			reg = <0x0 0x100000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0 0x0 0x100000>;
-+
-+			base_mac_addr: mac@106a0 {
-+				reg = <0x106a0 0x6>;
-+			};
-+		};
-+
-+		partition@100000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			label = "firmware";
-+			reg = <0x100000 0x4400000>;
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
-@@ -0,0 +1,182 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+
-+#include "bcm4906.dtsi"
-+
-+/ {
-+	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
-+	model = "TP-Link Archer C2300 V1";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x20000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led-power {
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-2ghz {
-+			function = "2ghz";
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-5ghz {
-+			function = "5ghz";
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-wan-amber {
-+			function = LED_FUNCTION_WAN;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		led-wan-blue {
-+			function = LED_FUNCTION_WAN;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-lan {
-+			function = LED_FUNCTION_LAN;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-wps {
-+			function = LED_FUNCTION_WPS;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb2 {
-+			function = "usb2";
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb3 {
-+			function = "usbd3";
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-brightness {
-+			function = LED_FUNCTION_BACKLIGHT;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-keys-polled {
-+		compatible = "gpio-keys-polled";
-+		poll-interval = <100>;
-+
-+		key-brightness {
-+			label = "LEDs";
-+			linux,code = <KEY_BRIGHTNESS_ZERO>;
-+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		key-wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		key-wifi {
-+			label = "WiFi";
-+			linux,code = <KEY_RFKILL>;
-+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		key-restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&usb_phy {
-+	brcm,ioc = <1>;
-+	status = "okay";
-+};
-+
-+&ehci {
-+	status = "okay";
-+};
-+
-+&ohci {
-+	status = "okay";
-+};
-+
-+&xhci {
-+	status = "okay";
-+};
-+
-+&ports {
-+	port@0 {
-+		label = "lan4";
-+	};
-+
-+	port@1 {
-+		label = "lan3";
-+	};
-+
-+	port@2 {
-+		label = "lan2";
-+	};
-+
-+	port@3 {
-+		label = "lan1";
-+	};
-+
-+	port@7 {
-+		reg = <7>;
-+		phy-mode = "internal";
-+		phy-handle = <&phy12>;
-+		label = "wan";
-+	};
-+};
-+
-+&nandcs {
-+	nand-ecc-strength = <4>;
-+	nand-ecc-step-size = <512>;
-+	nand-on-flash-bbt;
-+
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	partitions {
-+		compatible = "brcm,bcm4908-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "cferom";
-+			reg = <0x0 0x100000>;
-+		};
-+
-+		partition@100000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			reg = <0x100000 0x3900000>;
-+		};
-+
-+		partition@5800000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			reg = <0x3a00000 0x3900000>;
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
-@@ -0,0 +1,26 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include "bcm4908.dtsi"
-+
-+/ {
-+	cpus {
-+		/delete-node/ cpu@2;
-+
-+		/delete-node/ cpu@3;
-+	};
-+
-+	timer {
-+		compatible = "arm,armv8-timer";
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-+	};
-+
-+	pmu {
-+		compatible = "arm,cortex-a53-pmu";
-+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-affinity = <&cpu0>, <&cpu1>;
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
-@@ -0,0 +1,207 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+
-+#include "bcm4908.dtsi"
-+
-+/ {
-+	compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
-+	model = "Asus GT-AC5300";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x40000000>;
-+	};
-+
-+	gpio-keys-polled {
-+		compatible = "gpio-keys-polled";
-+		poll-interval = <100>;
-+
-+		key-wifi {
-+			label = "WiFi";
-+			linux,code = <KEY_RFKILL>;
-+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		key-wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		key-restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		key-brightness {
-+			label = "LEDs";
-+			linux,code = <KEY_BRIGHTNESS_ZERO>;
-+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&enet {
-+	nvmem-cells = <&base_mac_addr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
-+&usb_phy {
-+	brcm,ioc = <1>;
-+	status = "okay";
-+};
-+
-+&ehci {
-+	status = "okay";
-+};
-+
-+&ohci {
-+	status = "okay";
-+};
-+
-+&xhci {
-+	status = "okay";
-+};
-+
-+&ports {
-+	port@0 {
-+		label = "lan2";
-+	};
-+
-+	port@1 {
-+		label = "lan1";
-+	};
-+
-+	port@2 {
-+		label = "lan6";
-+	};
-+
-+	port@3 {
-+		label = "lan5";
-+	};
-+
-+	/* External BCM53134S switch */
-+	port@7 {
-+		label = "sw";
-+		reg = <7>;
-+		phy-mode = "rgmii";
-+
-+		fixed-link {
-+			speed = <1000>;
-+			full-duplex;
-+		};
-+	};
-+};
-+
-+&mdio {
-+	/* lan8 */
-+	ethernet-phy@0 {
-+		reg = <0>;
-+	};
-+
-+	/* lan7 */
-+	ethernet-phy@1 {
-+		reg = <1>;
-+	};
-+
-+	/* lan4 */
-+	ethernet-phy@2 {
-+		reg = <2>;
-+	};
-+
-+	/* lan3 */
-+	ethernet-phy@3 {
-+		reg = <3>;
-+	};
-+};
-+
-+&leds {
-+	led-power@11 {
-+		reg = <0x11>;
-+		function = LED_FUNCTION_POWER;
-+		color = <LED_COLOR_ID_WHITE>;
-+		default-state = "on";
-+		active-low;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pins_led_17_a>;
-+	};
-+
-+	led-wan-red@12 {
-+		reg = <0x12>;
-+		function = LED_FUNCTION_WAN;
-+		color = <LED_COLOR_ID_RED>;
-+		active-low;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pins_led_18_a>;
-+	};
-+
-+	led-wps@14 {
-+		reg = <0x14>;
-+		function = LED_FUNCTION_WPS;
-+		color = <LED_COLOR_ID_WHITE>;
-+		active-low;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pins_led_20_a>;
-+	};
-+
-+	led-wan-white@15 {
-+		reg = <0x15>;
-+		function = LED_FUNCTION_WAN;
-+		color = <LED_COLOR_ID_WHITE>;
-+		active-low;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pins_led_21_a>;
-+	};
-+
-+	led-lan@19 {
-+		reg = <0x19>;
-+		function = LED_FUNCTION_LAN;
-+		color = <LED_COLOR_ID_WHITE>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pins_led_25_a>;
-+	};
-+};
-+
-+&nandcs {
-+	nand-ecc-strength = <4>;
-+	nand-ecc-step-size = <512>;
-+	nand-on-flash-bbt;
-+	brcm,nand-has-wp;
-+
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	partitions {
-+		compatible = "brcm,bcm4908-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			compatible = "nvmem-cells";
-+			label = "cferom";
-+			reg = <0x0 0x100000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0 0x0 0x100000>;
-+
-+			base_mac_addr: mac@106a0 {
-+				reg = <0x106a0 0x6>;
-+			};
-+		};
-+
-+		partition@100000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			reg = <0x100000 0x5700000>;
-+		};
-+
-+		partition@5800000 {
-+			compatible = "brcm,bcm4908-firmware";
-+			reg = <0x5800000 0x5700000>;
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
-@@ -0,0 +1,50 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include "bcm4908.dtsi"
-+
-+/ {
-+	compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
-+	model = "Netgear RAXE500";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00 0x00 0x00 0x40000000>;
-+	};
-+};
-+
-+&ehci {
-+	status = "okay";
-+};
-+
-+&ohci {
-+	status = "okay";
-+};
-+
-+&xhci {
-+	status = "okay";
-+};
-+
-+&ports {
-+	port@0 {
-+		label = "lan4";
-+	};
-+
-+	port@1 {
-+		label = "lan3";
-+	};
-+
-+	port@2 {
-+		label = "lan2";
-+	};
-+
-+	port@3 {
-+		label = "lan1";
-+	};
-+
-+	port@7 {
-+		reg = <7>;
-+		phy-mode = "internal";
-+		phy-handle = <&phy12>;
-+		label = "wan";
-+	};
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -0,0 +1,575 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/phy/phy.h>
-+#include <dt-bindings/soc/bcm-pmb.h>
-+
-+/dts-v1/;
-+
-+/ {
-+	interrupt-parent = <&gic>;
-+
-+	#address-cells = <2>;
-+	#size-cells = <2>;
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		cpu0: cpu@0 {
-+			device_type = "cpu";
-+			compatible = "brcm,brahma-b53";
-+			reg = <0x0>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0xfff8>;
-+			next-level-cache = <&l2>;
-+		};
-+
-+		cpu1: cpu@1 {
-+			device_type = "cpu";
-+			compatible = "brcm,brahma-b53";
-+			reg = <0x1>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0xfff8>;
-+			next-level-cache = <&l2>;
-+		};
-+
-+		cpu2: cpu@2 {
-+			device_type = "cpu";
-+			compatible = "brcm,brahma-b53";
-+			reg = <0x2>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0xfff8>;
-+			next-level-cache = <&l2>;
-+		};
-+
-+		cpu3: cpu@3 {
-+			device_type = "cpu";
-+			compatible = "brcm,brahma-b53";
-+			reg = <0x3>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0xfff8>;
-+			next-level-cache = <&l2>;
-+		};
-+
-+		l2: l2-cache0 {
-+			compatible = "cache";
-+		};
-+	};
-+
-+	axi@81000000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x00 0x00 0x81000000 0x4000>;
-+
-+		gic: interrupt-controller@1000 {
-+			compatible = "arm,gic-400";
-+			#interrupt-cells = <3>;
-+			#address-cells = <0>;
-+			interrupt-controller;
-+			reg = <0x1000 0x1000>,
-+			      <0x2000 0x2000>;
-+		};
-+	};
-+
-+	timer {
-+		compatible = "arm,armv8-timer";
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+	};
-+
-+	pmu {
-+		compatible = "arm,cortex-a53-pmu";
-+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-+	};
-+
-+	clocks {
-+		periph_clk: periph_clk {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <50000000>;
-+			clock-output-names = "periph";
-+		};
-+	};
-+
-+	soc {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x00 0x00 0x80000000 0x281000>;
-+
-+		enet: ethernet@2000 {
-+			compatible = "brcm,bcm4908-enet";
-+			reg = <0x2000 0x1000>;
-+
-+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "rx", "tx";
-+		};
-+
-+		usb_phy: usb-phy@c200 {
-+			compatible = "brcm,bcm4908-usb-phy";
-+			reg = <0xc200 0x100>;
-+			reg-names = "ctrl";
-+			power-domains = <&pmb BCM_PMB_HOST_USB>;
-+			dr_mode = "host";
-+			brcm,has-xhci;
-+			brcm,has-eohci;
-+			#phy-cells = <1>;
-+			status = "disabled";
-+		};
-+
-+		ehci: usb@c300 {
-+			compatible = "generic-ehci";
-+			reg = <0xc300 0x100>;
-+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-+			phys = <&usb_phy PHY_TYPE_USB2>;
-+			status = "disabled";
-+		};
-+
-+		ohci: usb@c400 {
-+			compatible = "generic-ohci";
-+			reg = <0xc400 0x100>;
-+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-+			phys = <&usb_phy PHY_TYPE_USB2>;
-+			status = "disabled";
-+		};
-+
-+		xhci: usb@d000 {
-+			compatible = "generic-xhci";
-+			reg = <0xd000 0x8c8>;
-+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-+			phys = <&usb_phy PHY_TYPE_USB3>;
-+			status = "disabled";
-+		};
-+
-+		bus@80000 {
-+			compatible = "simple-bus";
-+			#size-cells = <1>;
-+			#address-cells = <1>;
-+			ranges = <0 0x80000 0x50000>;
-+
-+			ethernet-switch@0 {
-+				compatible = "brcm,bcm4908-switch";
-+				reg = <0x0 0x40000>,
-+				      <0x40000 0x110>,
-+				      <0x40340 0x30>,
-+				      <0x40380 0x30>,
-+				      <0x40600 0x34>,
-+				      <0x40800 0x208>;
-+				reg-names = "core", "reg", "intrl2_0",
-+					    "intrl2_1", "fcb", "acb";
-+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-+					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-+				brcm,num-gphy = <5>;
-+				brcm,num-rgmii-ports = <2>;
-+
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				ports: ports {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					port@0 {
-+						reg = <0>;
-+						phy-mode = "internal";
-+						phy-handle = <&phy8>;
-+					};
-+
-+					port@1 {
-+						reg = <1>;
-+						phy-mode = "internal";
-+						phy-handle = <&phy9>;
-+					};
-+
-+					port@2 {
-+						reg = <2>;
-+						phy-mode = "internal";
-+						phy-handle = <&phy10>;
-+					};
-+
-+					port@3 {
-+						reg = <3>;
-+						phy-mode = "internal";
-+						phy-handle = <&phy11>;
-+					};
-+
-+					port@8 {
-+						reg = <8>;
-+						phy-mode = "internal";
-+						ethernet = <&enet>;
-+
-+						fixed-link {
-+							speed = <1000>;
-+							full-duplex;
-+						};
-+					};
-+				};
-+			};
-+
-+			mdio: mdio@405c0 {
-+				compatible = "brcm,unimac-mdio";
-+				reg = <0x405c0 0x8>;
-+				reg-names = "mdio";
-+				#size-cells = <0>;
-+				#address-cells = <1>;
-+
-+				phy8: ethernet-phy@8 {
-+					reg = <8>;
-+				};
-+
-+				phy9: ethernet-phy@9 {
-+					reg = <9>;
-+				};
-+
-+				phy10: ethernet-phy@a {
-+					reg = <10>;
-+				};
-+
-+				phy11: ethernet-phy@b {
-+					reg = <11>;
-+				};
-+
-+				phy12: ethernet-phy@c {
-+					reg = <12>;
-+				};
-+			};
-+		};
-+
-+		procmon: syscon@280000 {
-+			compatible = "simple-bus";
-+			reg = <0x280000 0x1000>;
-+			ranges;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			pmb: power-controller@2800c0 {
-+				compatible = "brcm,bcm4908-pmb";
-+				reg = <0x2800c0 0x40>;
-+				#power-domain-cells = <1>;
-+			};
-+		};
-+	};
-+
-+	bus@ff800000 {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x00 0x00 0xff800000 0x3000>;
-+
-+		twd: timer-mfd@400 {
-+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
-+			reg = <0x400 0x4c>;
-+			ranges = <0x0 0x400 0x4c>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			watchdog@28 {
-+				compatible = "brcm,bcm6345-wdt";
-+				reg = <0x28 0x8>;
-+			};
-+		};
-+
-+		gpio0: gpio-controller@500 {
-+			compatible = "brcm,bcm6345-gpio";
-+			reg-names = "dirout", "dat";
-+			reg = <0x500 0x28>, <0x528 0x28>;
-+
-+			#gpio-cells = <2>;
-+			gpio-controller;
-+		};
-+
-+		pinctrl@560 {
-+			compatible = "brcm,bcm4908-pinctrl";
-+			reg = <0x560 0x10>;
-+
-+			pins_led_0_a: led_0-a-pins {
-+				function = "led_0";
-+				groups = "led_0_grp_a";
-+			};
-+
-+			pins_led_1_a: led_1-a-pins {
-+				function = "led_1";
-+				groups = "led_1_grp_a";
-+			};
-+
-+			pins_led_2_a: led_2-a-pins {
-+				function = "led_2";
-+				groups = "led_2_grp_a";
-+			};
-+
-+			pins_led_3_a: led_3-a-pins {
-+				function = "led_3";
-+				groups = "led_3_grp_a";
-+			};
-+
-+			pins_led_4_a: led_4-a-pins {
-+				function = "led_4";
-+				groups = "led_4_grp_a";
-+			};
-+
-+			pins_led_5_a: led_5-a-pins {
-+				function = "led_5";
-+				groups = "led_5_grp_a";
-+			};
-+
-+			pins_led_6_a: led_6-a-pins {
-+				function = "led_6";
-+				groups = "led_6_grp_a";
-+			};
-+
-+			pins_led_7_a: led_7-a-pins {
-+				function = "led_7";
-+				groups = "led_7_grp_a";
-+			};
-+
-+			pins_led_8_a: led_8-a-pins {
-+				function = "led_8";
-+				groups = "led_8_grp_a";
-+			};
-+
-+			pins_led_9_a: led_9-a-pins {
-+				function = "led_9";
-+				groups = "led_9_grp_a";
-+			};
-+
-+			pins_led_10_a: led_10-a-pins {
-+				function = "led_10";
-+				groups = "led_10_grp_a";
-+			};
-+
-+			pins_led_11_a: led_11-a-pins {
-+				function = "led_11";
-+				groups = "led_11_grp_a";
-+			};
-+
-+			pins_led_12_a: led_12-a-pins {
-+				function = "led_12";
-+				groups = "led_12_grp_a";
-+			};
-+
-+			pins_led_13_a: led_13-a-pins {
-+				function = "led_13";
-+				groups = "led_13_grp_a";
-+			};
-+
-+			pins_led_14_a: led_14-a-pins {
-+				function = "led_14";
-+				groups = "led_14_grp_a";
-+			};
-+
-+			pins_led_15_a: led_15-a-pins {
-+				function = "led_15";
-+				groups = "led_15_grp_a";
-+			};
-+
-+			pins_led_16_a: led_16-a-pins {
-+				function = "led_16";
-+				groups = "led_16_grp_a";
-+			};
-+
-+			pins_led_17_a: led_17-a-pins {
-+				function = "led_17";
-+				groups = "led_17_grp_a";
-+			};
-+
-+			pins_led_18_a: led_18-a-pins {
-+				function = "led_18";
-+				groups = "led_18_grp_a";
-+			};
-+
-+			pins_led_19_a: led_19-a-pins {
-+				function = "led_19";
-+				groups = "led_19_grp_a";
-+			};
-+
-+			pins_led_20_a: led_20-a-pins {
-+				function = "led_20";
-+				groups = "led_20_grp_a";
-+			};
-+
-+			pins_led_21_a: led_21-a-pins {
-+				function = "led_21";
-+				groups = "led_21_grp_a";
-+			};
-+
-+			pins_led_22_a: led_22-a-pins {
-+				function = "led_22";
-+				groups = "led_22_grp_a";
-+			};
-+
-+			pins_led_23_a: led_23-a-pins {
-+				function = "led_23";
-+				groups = "led_23_grp_a";
-+			};
-+
-+			pins_led_24_a: led_24-a-pins {
-+				function = "led_24";
-+				groups = "led_24_grp_a";
-+			};
-+
-+			pins_led_25_a: led_25-a-pins {
-+				function = "led_25";
-+				groups = "led_25_grp_a";
-+			};
-+
-+			pins_led_26_a: led_26-a-pins {
-+				function = "led_26";
-+				groups = "led_26_grp_a";
-+			};
-+
-+			pins_led_27_a: led_27-a-pins {
-+				function = "led_27";
-+				groups = "led_27_grp_a";
-+			};
-+
-+			pins_led_28_a: led_28-a-pins {
-+				function = "led_28";
-+				groups = "led_28_grp_a";
-+			};
-+
-+			pins_led_29_a: led_29-a-pins {
-+				function = "led_29";
-+				groups = "led_29_grp_a";
-+			};
-+
-+			pins_led_30_a: led_30-a-pins {
-+				function = "led_30";
-+				groups = "led_30_grp_a";
-+			};
-+
-+			pins_led_31_a: led_31-a-pins {
-+				function = "led_31";
-+				groups = "led_31_grp_a";
-+			};
-+
-+			pins_hs_uart: hs_uart-pins {
-+				function = "hs_uart";
-+				groups = "hs_uart_grp";
-+			};
-+
-+			pins_i2c_a: i2c-a-pins {
-+				function = "i2c";
-+				groups = "i2c_grp_a";
-+			};
-+
-+			pins_i2c_b: i2c-b-pins {
-+				function = "i2c";
-+				groups = "i2c_grp_b";
-+			};
-+
-+			pins_i2s: i2s-pins {
-+				function = "i2s";
-+				groups = "i2s_grp";
-+			};
-+
-+			pins_nand_ctrl: nand_ctrl-pins {
-+				function = "nand_ctrl";
-+				groups = "nand_ctrl_grp";
-+			};
-+
-+			pins_nand_data: nand_data-pins {
-+				function = "nand_data";
-+				groups = "nand_data_grp";
-+			};
-+
-+			pins_emmc_ctrl: emmc_ctrl-pins {
-+				function = "emmc_ctrl";
-+				groups = "emmc_ctrl_grp";
-+			};
-+
-+			pins_usb0_pwr: usb0_pwr-pins {
-+				function = "usb0_pwr";
-+				groups = "usb0_pwr_grp";
-+			};
-+
-+			pins_usb1_pwr: usb1_pwr-pins {
-+				function = "usb1_pwr";
-+				groups = "usb1_pwr_grp";
-+			};
-+		};
-+
-+		uart0: serial@640 {
-+			compatible = "brcm,bcm6345-uart";
-+			reg = <0x640 0x18>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&periph_clk>;
-+			clock-names = "refclk";
-+			status = "okay";
-+		};
-+
-+		leds: leds@800 {
-+			compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
-+			reg = <0x800 0xdc>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		nand-controller@1800 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
-+			reg = <0x1800 0x600>, <0x2000 0x10>;
-+			reg-names = "nand", "nand-int-base";
-+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "nand";
-+			status = "okay";
-+
-+			nandcs: nand@0 {
-+				compatible = "brcm,nandcs";
-+				reg = <0>;
-+			};
-+		};
-+
-+		i2c@2100 {
-+			compatible = "brcm,brcmper-i2c";
-+			reg = <0x2100 0x58>;
-+			clock-frequency = <97500>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pins_i2c_a>;
-+			status = "disabled";
-+		};
-+
-+		misc@2600 {
-+			compatible = "brcm,misc", "simple-mfd";
-+			reg = <0x2600 0xe4>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0x00 0x2600 0xe4>;
-+
-+			reset-controller@2644 {
-+				compatible = "brcm,bcm4908-misc-pcie-reset";
-+				reg = <0x44 0x04>;
-+				#reset-cells = <1>;
-+			};
-+		};
-+	};
-+
-+	reboot {
-+		compatible = "syscon-reboot";
-+		regmap = <&twd>;
-+		offset = <0x34>;
-+		mask = <1>;
-+	};
-+};
diff --git a/target/linux/bcm4908/patches-5.10/038-v6.1-0006-arm64-dts-Add-BCM4908-generic-board-dts.patch b/target/linux/bcm4908/patches-5.10/038-v6.1-0006-arm64-dts-Add-BCM4908-generic-board-dts.patch
deleted file mode 100644
index b19c5d33b4c3..000000000000
--- a/target/linux/bcm4908/patches-5.10/038-v6.1-0006-arm64-dts-Add-BCM4908-generic-board-dts.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 72e0bdb6d7edb1785d58f2e8e7c80e1d2f93a319 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 3 Aug 2022 10:54:51 -0700
-Subject: [PATCH] arm64: dts: Add BCM4908 generic board dts
-
-Add generic bare bone bcm94908.dts file to support any 4908 based
-design. It supports cpu subsystem, memory and an uart console. This can
-be useful for board bring-up and cpu subsystem and memory related kernel
-test as well.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Link: https://lore.kernel.org/r/20220803175455.47638-6-william.zhang@broadcom.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |  1 +
- .../boot/dts/broadcom/bcmbca/bcm94908.dts     | 30 +++++++++++++++++++
- 2 files changed, 31 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \
- 				bcm4906-tplink-archer-c2300-v1.dtb \
- 				bcm4908-asus-gt-ac5300.dtb \
- 				bcm4908-netgear-raxe500.dtb \
-+				bcm94908.dtb \
- 				bcm4912-asus-gt-ax6000.dtb \
- 				bcm94912.dtb \
- 				bcm963158.dtb \
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
-@@ -0,0 +1,30 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4908.dtsi"
-+
-+/ {
-+	model = "Broadcom BCM94908 Reference Board";
-+	compatible = "brcm,bcm94908", "brcm,bcm4908", "brcm,bcmbca";
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x0 0x0 0x0 0x08000000>;
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm4908/patches-5.10/039-v6.2-0001-arm64-dts-broadcom-bcmbca-bcm4908-add-TWD-block-time.patch b/target/linux/bcm4908/patches-5.10/039-v6.2-0001-arm64-dts-broadcom-bcmbca-bcm4908-add-TWD-block-time.patch
deleted file mode 100644
index a3f49ca440a9..000000000000
--- a/target/linux/bcm4908/patches-5.10/039-v6.2-0001-arm64-dts-broadcom-bcmbca-bcm4908-add-TWD-block-time.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 68064196cffea33f090bd2e8d81cd5e20107ecf1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 3 Nov 2022 11:53:16 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add TWD block timer
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 TWD contains block with 4 timers. Add binding for it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20221103105316.21294-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -283,6 +283,11 @@
- 			#address-cells = <1>;
- 			#size-cells = <1>;
- 
-+			timer@0 {
-+				compatible = "brcm,bcm63138-timer";
-+				reg = <0x0 0x28>;
-+			};
-+
- 			watchdog@28 {
- 				compatible = "brcm,bcm6345-wdt";
- 				reg = <0x28 0x8>;
diff --git a/target/linux/bcm4908/patches-5.10/039-v6.2-0002-arm64-dts-broadcom-bcmbca-bcm6858-add-TWD-block.patch b/target/linux/bcm4908/patches-5.10/039-v6.2-0002-arm64-dts-broadcom-bcmbca-bcm6858-add-TWD-block.patch
deleted file mode 100644
index e8e81ae5441b..000000000000
--- a/target/linux/bcm4908/patches-5.10/039-v6.2-0002-arm64-dts-broadcom-bcmbca-bcm6858-add-TWD-block.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 4f9fb09175e87a233787a2dee1e5dabb14deb022 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 3 Nov 2022 12:00:15 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm6858: add TWD block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM6858 contains TWD block with timers, watchdog, and reset subblocks.
-Describe it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20221103110015.21761-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcmbca/bcm6858.dtsi     | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-@@ -109,6 +109,25 @@
- 		#size-cells = <1>;
- 		ranges = <0x0 0x0 0xff800000 0x62000>;
- 
-+		twd: timer-mfd@400 {
-+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
-+			reg = <0x400 0x4c>;
-+			ranges = <0x0 0x400 0x4c>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			timer@0 {
-+				compatible = "brcm,bcm63138-timer";
-+				reg = <0x0 0x28>;
-+			};
-+
-+			watchdog@28 {
-+				compatible = "brcm,bcm6345-wdt";
-+				reg = <0x28 0x8>;
-+			};
-+		};
-+
- 		uart0: serial@640 {
- 			compatible = "brcm,bcm6345-uart";
- 			reg = <0x640 0x18>;
diff --git a/target/linux/bcm4908/patches-5.10/039-v6.2-0003-arm64-dts-Update-cache-properties-for-broadcom.patch b/target/linux/bcm4908/patches-5.10/039-v6.2-0003-arm64-dts-Update-cache-properties-for-broadcom.patch
deleted file mode 100644
index a19ab8cf8fdd..000000000000
--- a/target/linux/bcm4908/patches-5.10/039-v6.2-0003-arm64-dts-Update-cache-properties-for-broadcom.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From e567e58d6819adc002c57b81e16b88da24d3b4aa Mon Sep 17 00:00:00 2001
-From: Pierre Gondois <pierre.gondois@arm.com>
-Date: Tue, 22 Nov 2022 17:32:07 +0100
-Subject: [PATCH] arm64: dts: Update cache properties for broadcom
-
-The DeviceTree Specification v0.3 specifies that the cache node
-'compatible' and 'cache-level' properties are 'required'. Cf.
-s3.8 Multi-level and Shared Cache Nodes
-The 'cache-unified' property should be present if one of the
-properties for unified cache is present ('cache-size', ...).
-
-Update the Device Trees accordingly.
-
-Acked-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
-Link: https://lore.kernel.org/r/20221122163208.3810985-3-pierre.gondois@arm.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi    | 1 +
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi    | 1 +
- arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi   | 1 +
- arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi   | 1 +
- arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi    | 1 +
- arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi    | 1 +
- arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi    | 1 +
- arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi    | 1 +
- arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 4 ++++
- 9 files changed, 12 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -63,6 +63,7 @@
- 
- 		l2: l2-cache0 {
- 			compatible = "cache";
-+			cache-level = <2>;
- 		};
- 	};
- 
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
-@@ -51,6 +51,7 @@
- 
- 		L2_0: l2-cache0 {
- 			compatible = "cache";
-+			cache-level = <2>;
- 		};
- 	};
- 
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
-@@ -35,6 +35,7 @@
- 
- 		L2_0: l2-cache0 {
- 			compatible = "cache";
-+			cache-level = <2>;
- 		};
- 	};
- 
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
-@@ -51,6 +51,7 @@
- 
- 		L2_0: l2-cache0 {
- 			compatible = "cache";
-+			cache-level = <2>;
- 		};
- 	};
- 
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
-@@ -51,6 +51,7 @@
- 
- 		L2_0: l2-cache0 {
- 			compatible = "cache";
-+			cache-level = <2>;
- 		};
- 	};
- 
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
-@@ -35,6 +35,7 @@
- 
- 		L2_0: l2-cache0 {
- 			compatible = "cache";
-+			cache-level = <2>;
- 		};
- 	};
- 
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-@@ -50,6 +50,7 @@
- 		};
- 		L2_0: l2-cache0 {
- 			compatible = "cache";
-+			cache-level = <2>;
- 		};
- 	};
- 
---- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
-@@ -79,6 +79,7 @@
- 
- 		CLUSTER0_L2: l2-cache@0 {
- 			compatible = "cache";
-+			cache-level = <2>;
- 		};
- 	};
- 
---- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
-@@ -108,18 +108,22 @@
- 
- 		CLUSTER0_L2: l2-cache@0 {
- 			compatible = "cache";
-+			cache-level = <2>;
- 		};
- 
- 		CLUSTER1_L2: l2-cache@100 {
- 			compatible = "cache";
-+			cache-level = <2>;
- 		};
- 
- 		CLUSTER2_L2: l2-cache@200 {
- 			compatible = "cache";
-+			cache-level = <2>;
- 		};
- 
- 		CLUSTER3_L2: l2-cache@300 {
- 			compatible = "cache";
-+			cache-level = <2>;
- 		};
- 	};
- 
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.1-mtd-parsers-add-Broadcom-s-U-Boot-parser.patch b/target/linux/bcm4908/patches-5.10/040-v6.1-mtd-parsers-add-Broadcom-s-U-Boot-parser.patch
deleted file mode 100644
index 4d4059b17f14..000000000000
--- a/target/linux/bcm4908/patches-5.10/040-v6.1-mtd-parsers-add-Broadcom-s-U-Boot-parser.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From 002181f5b150e60c77f21de7ad4dd10e4614cd91 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 11 Jul 2022 17:30:41 +0200
-Subject: [PATCH] mtd: parsers: add Broadcom's U-Boot parser
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom stores environment variables blocks inside U-Boot partition
-itself. This driver finds & registers them.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220711153041.6036-2-zajec5@gmail.com
----
- drivers/mtd/parsers/Kconfig       | 10 ++++
- drivers/mtd/parsers/Makefile      |  1 +
- drivers/mtd/parsers/brcm_u-boot.c | 84 +++++++++++++++++++++++++++++++
- 3 files changed, 95 insertions(+)
- create mode 100644 drivers/mtd/parsers/brcm_u-boot.c
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -20,6 +20,16 @@ config MTD_BCM63XX_PARTS
- 	  This provides partition parsing for BCM63xx devices with CFE
- 	  bootloaders.
- 
-+config MTD_BRCM_U_BOOT
-+	tristate "Broadcom's U-Boot partition parser"
-+	depends on ARCH_BCM4908 || COMPILE_TEST
-+	help
-+	  Broadcom uses a custom way of storing U-Boot environment variables.
-+	  They are placed inside U-Boot partition itself at unspecified offset.
-+	  It's possible to locate them by looking for a custom header with a
-+	  magic value. This driver does that and creates subpartitions for
-+	  each found environment variables block.
-+
- config MTD_CMDLINE_PARTS
- 	tristate "Command line partition table parsing"
- 	depends on MTD
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -2,6 +2,7 @@
- obj-$(CONFIG_MTD_AR7_PARTS)		+= ar7part.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS)		+= bcm47xxpart.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)		+= bcm63xxpart.o
-+obj-$(CONFIG_MTD_BRCM_U_BOOT)		+= brcm_u-boot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS)		+= cmdlinepart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS)		+= myloader.o
- obj-$(CONFIG_MTD_OF_PARTS)		+= ofpart.o
---- /dev/null
-+++ b/drivers/mtd/parsers/brcm_u-boot.c
-@@ -0,0 +1,84 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright © 2022 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#define BRCM_U_BOOT_MAX_OFFSET		0x200000
-+#define BRCM_U_BOOT_STEP		0x1000
-+
-+#define BRCM_U_BOOT_MAX_PARTS		2
-+
-+#define BRCM_U_BOOT_MAGIC		0x75456e76	/* uEnv */
-+
-+struct brcm_u_boot_header {
-+	__le32 magic;
-+	__le32 length;
-+} __packed;
-+
-+static const char *names[BRCM_U_BOOT_MAX_PARTS] = {
-+	"u-boot-env",
-+	"u-boot-env-backup",
-+};
-+
-+static int brcm_u_boot_parse(struct mtd_info *mtd,
-+			     const struct mtd_partition **pparts,
-+			     struct mtd_part_parser_data *data)
-+{
-+	struct brcm_u_boot_header header;
-+	struct mtd_partition *parts;
-+	size_t bytes_read;
-+	size_t offset;
-+	int err;
-+	int i = 0;
-+
-+	parts = kcalloc(BRCM_U_BOOT_MAX_PARTS, sizeof(*parts), GFP_KERNEL);
-+	if (!parts)
-+		return -ENOMEM;
-+
-+	for (offset = 0;
-+	     offset < min_t(size_t, mtd->size, BRCM_U_BOOT_MAX_OFFSET);
-+	     offset += BRCM_U_BOOT_STEP) {
-+		err = mtd_read(mtd, offset, sizeof(header), &bytes_read, (uint8_t *)&header);
-+		if (err && !mtd_is_bitflip(err)) {
-+			pr_err("Failed to read from %s at 0x%zx: %d\n", mtd->name, offset, err);
-+			continue;
-+		}
-+
-+		if (le32_to_cpu(header.magic) != BRCM_U_BOOT_MAGIC)
-+			continue;
-+
-+		parts[i].name = names[i];
-+		parts[i].offset = offset;
-+		parts[i].size = sizeof(header) + le32_to_cpu(header.length);
-+		i++;
-+		pr_info("offset:0x%zx magic:0x%08x BINGO\n", offset, header.magic);
-+
-+		if (i == BRCM_U_BOOT_MAX_PARTS)
-+			break;
-+	}
-+
-+	*pparts = parts;
-+
-+	return i;
-+};
-+
-+static const struct of_device_id brcm_u_boot_of_match_table[] = {
-+	{ .compatible = "brcm,u-boot" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, brcm_u_boot_of_match_table);
-+
-+static struct mtd_part_parser brcm_u_boot_mtd_parser = {
-+	.parse_fn = brcm_u_boot_parse,
-+	.name = "brcm_u-boot",
-+	.of_match_table = brcm_u_boot_of_match_table,
-+};
-+module_mtd_part_parser(brcm_u_boot_mtd_parser);
-+
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0001-arm64-dts-broadcom-bcmbca-Add-spi-controller-node.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0001-arm64-dts-broadcom-bcmbca-Add-spi-controller-node.patch
deleted file mode 100644
index e8e122817931..000000000000
--- a/target/linux/bcm4908/patches-5.10/040-v6.4-0001-arm64-dts-broadcom-bcmbca-Add-spi-controller-node.patch
+++ /dev/null
@@ -1,367 +0,0 @@
-From f5d83b714e304d5f3229da434af2eeea033c4f5d Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Mon, 6 Feb 2023 22:58:15 -0800
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: Add spi controller node
-
-Add support for HSSPI controller in ARMv8 chip dts files.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Link: https://lore.kernel.org/r/20230207065826.285013-5-william.zhang@broadcom.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcmbca/bcm4908.dtsi     | 18 +++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm4912.dtsi     | 20 +++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm63146.dtsi    | 19 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm63158.dtsi    | 19 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm6813.dtsi     | 20 +++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm6856.dtsi     | 18 +++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm6858.dtsi     | 18 +++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm94908.dts     |  4 ++++
- .../boot/dts/broadcom/bcmbca/bcm94912.dts     |  4 ++++
- .../boot/dts/broadcom/bcmbca/bcm963146.dts    |  4 ++++
- .../boot/dts/broadcom/bcmbca/bcm963158.dts    |  4 ++++
- .../boot/dts/broadcom/bcmbca/bcm96813.dts     |  4 ++++
- .../boot/dts/broadcom/bcmbca/bcm96856.dts     |  4 ++++
- .../boot/dts/broadcom/bcmbca/bcm96858.dts     |  4 ++++
- 14 files changed, 160 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -107,6 +107,12 @@
- 			clock-frequency = <50000000>;
- 			clock-output-names = "periph";
- 		};
-+
-+		hsspi_pll: hsspi-pll {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <400000000>;
-+		};
- 	};
- 
- 	soc {
-@@ -531,6 +537,18 @@
- 			#size-cells = <0>;
- 		};
- 
-+		hsspi: spi@1000{
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "brcm,bcm4908-hsspi", "brcm,bcmbca-hsspi-v1.0";
-+			reg = <0x1000 0x600>;
-+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&hsspi_pll &hsspi_pll>;
-+			clock-names = "hsspi", "pll";
-+			num-cs = <8>;
-+			status = "disabled";
-+		};
-+
- 		nand-controller@1800 {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
-@@ -79,6 +79,7 @@
- 			#clock-cells = <0>;
- 			clock-frequency = <200000000>;
- 		};
-+
- 		uart_clk: uart-clk {
- 			compatible = "fixed-factor-clock";
- 			#clock-cells = <0>;
-@@ -86,6 +87,12 @@
- 			clock-div = <4>;
- 			clock-mult = <1>;
- 		};
-+
-+		hsspi_pll: hsspi-pll {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <200000000>;
-+		};
- 	};
- 
- 	psci {
-@@ -117,6 +124,19 @@
- 		#size-cells = <1>;
- 		ranges = <0x0 0x0 0xff800000 0x800000>;
- 
-+		hsspi: spi@1000 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "brcm,bcm4912-hsspi", "brcm,bcmbca-hsspi-v1.1";
-+			reg = <0x1000 0x600>, <0x2610 0x4>;
-+			reg-names = "hsspi", "spim-ctrl";
-+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&hsspi_pll &hsspi_pll>;
-+			clock-names = "hsspi", "pll";
-+			num-cs = <8>;
-+			status = "disabled";
-+		};
-+
- 		uart0: serial@12000 {
- 			compatible = "arm,pl011", "arm,primecell";
- 			reg = <0x12000 0x1000>;
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
-@@ -60,6 +60,7 @@
- 			#clock-cells = <0>;
- 			clock-frequency = <200000000>;
- 		};
-+
- 		uart_clk: uart-clk {
- 			compatible = "fixed-factor-clock";
- 			#clock-cells = <0>;
-@@ -67,6 +68,12 @@
- 			clock-div = <4>;
- 			clock-mult = <1>;
- 		};
-+
-+		hsspi_pll: hsspi-pll {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <200000000>;
-+		};
- 	};
- 
- 	psci {
-@@ -99,6 +106,18 @@
- 		#size-cells = <1>;
- 		ranges = <0x0 0x0 0xff800000 0x800000>;
- 
-+		hsspi: spi@1000 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0";
-+			reg = <0x1000 0x600>;
-+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&hsspi_pll &hsspi_pll>;
-+			clock-names = "hsspi", "pll";
-+			num-cs = <8>;
-+			status = "disabled";
-+		};
-+
- 		uart0: serial@12000 {
- 			compatible = "arm,pl011", "arm,primecell";
- 			reg = <0x12000 0x1000>;
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
-@@ -79,6 +79,7 @@
- 			#clock-cells = <0>;
- 			clock-frequency = <200000000>;
- 		};
-+
- 		uart_clk: uart-clk {
- 			compatible = "fixed-factor-clock";
- 			#clock-cells = <0>;
-@@ -86,6 +87,12 @@
- 			clock-div = <4>;
- 			clock-mult = <1>;
- 		};
-+
-+		hsspi_pll: hsspi-pll {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <400000000>;
-+		};
- 	};
- 
- 	psci {
-@@ -117,6 +124,18 @@
- 		#size-cells = <1>;
- 		ranges = <0x0 0x0 0xff800000 0x800000>;
- 
-+		hsspi: spi@1000 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0";
-+			reg = <0x1000 0x600>;
-+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&hsspi_pll &hsspi_pll>;
-+			clock-names = "hsspi", "pll";
-+			num-cs = <8>;
-+			status = "disabled";
-+		};
-+
- 		uart0: serial@12000 {
- 			compatible = "arm,pl011", "arm,primecell";
- 			reg = <0x12000 0x1000>;
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
-@@ -79,6 +79,7 @@
- 			#clock-cells = <0>;
- 			clock-frequency = <200000000>;
- 		};
-+
- 		uart_clk: uart-clk {
- 			compatible = "fixed-factor-clock";
- 			#clock-cells = <0>;
-@@ -86,6 +87,12 @@
- 			clock-div = <4>;
- 			clock-mult = <1>;
- 		};
-+
-+		hsspi_pll: hsspi-pll {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <200000000>;
-+		};
- 	};
- 
- 	psci {
-@@ -117,6 +124,19 @@
- 		#size-cells = <1>;
- 		ranges = <0x0 0x0 0xff800000 0x800000>;
- 
-+		hsspi: spi@1000 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "brcm,bcm6813-hsspi", "brcm,bcmbca-hsspi-v1.1";
-+			reg = <0x1000 0x600>, <0x2610 0x4>;
-+			reg-names = "hsspi", "spim-ctrl";
-+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&hsspi_pll &hsspi_pll>;
-+			clock-names = "hsspi", "pll";
-+			num-cs = <8>;
-+			status = "disabled";
-+		};
-+
- 		uart0: serial@12000 {
- 			compatible = "arm,pl011", "arm,primecell";
- 			reg = <0x12000 0x1000>;
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
-@@ -60,6 +60,12 @@
- 			#clock-cells = <0>;
- 			clock-frequency = <200000000>;
- 		};
-+
-+		hsspi_pll: hsspi-pll {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <400000000>;
-+		};
- 	};
- 
- 	psci {
-@@ -100,5 +106,17 @@
- 			clock-names = "refclk";
- 			status = "disabled";
- 		};
-+
-+		hsspi: spi@1000 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "brcm,bcm6856-hsspi", "brcm,bcmbca-hsspi-v1.0";
-+			reg = <0x1000 0x600>;
-+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&hsspi_pll &hsspi_pll>;
-+			clock-names = "hsspi", "pll";
-+			num-cs = <8>;
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-@@ -78,6 +78,12 @@
- 			#clock-cells = <0>;
- 			clock-frequency = <200000000>;
- 		};
-+
-+		hsspi_pll: hsspi-pll {
-+			compatible = "fixed-clock";
-+			#clock-cells = <0>;
-+			clock-frequency = <400000000>;
-+		};
- 	};
- 
- 	psci {
-@@ -137,5 +143,17 @@
- 			clock-names = "refclk";
- 			status = "disabled";
- 		};
-+
-+		hsspi: spi@1000 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "brcm,bcm6858-hsspi", "brcm,bcmbca-hsspi-v1.0";
-+			reg = <0x1000 0x600>;
-+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&hsspi_pll &hsspi_pll>;
-+			clock-names = "hsspi", "pll";
-+			num-cs = <8>;
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- 	status = "okay";
- };
-+
-+&hsspi {
-+	status = "okay";
-+};
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- 	status = "okay";
- };
-+
-+&hsspi {
-+	status = "okay";
-+};
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- 	status = "okay";
- };
-+
-+&hsspi {
-+	status = "okay";
-+};
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- 	status = "okay";
- };
-+
-+&hsspi {
-+	status = "okay";
-+};
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- 	status = "okay";
- };
-+
-+&hsspi {
-+	status = "okay";
-+};
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- 	status = "okay";
- };
-+
-+&hsspi {
-+	status = "okay";
-+};
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- 	status = "okay";
- };
-+
-+&hsspi {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch
deleted file mode 100644
index b121200a2568..000000000000
--- a/target/linux/bcm4908/patches-5.10/040-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 5cca02449490e767289bda38db1577e2c375c084 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 28 Feb 2023 15:43:58 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt
- name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes:
-arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: interrupt-names:0: 'nand_ctlrdy' was expected
-        From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
-arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
-        From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/all/20230228144400.21689-1-zajec5@gmail.com/
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -556,7 +556,7 @@
- 			reg = <0x1800 0x600>, <0x2000 0x10>;
- 			reg-names = "nand", "nand-int-base";
- 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
--			interrupt-names = "nand";
-+			interrupt-names = "nand_ctlrdy";
- 			status = "okay";
- 
- 			nandcs: nand@0 {
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0003-arm64-dts-broadcom-bcmbca-bcm4908-fix-LED-nodenames.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0003-arm64-dts-broadcom-bcmbca-bcm4908-fix-LED-nodenames.patch
deleted file mode 100644
index 7ce17c1870fa..000000000000
--- a/target/linux/bcm4908/patches-5.10/040-v6.4-0003-arm64-dts-broadcom-bcmbca-bcm4908-fix-LED-nodenames.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 23be9f68f933adee8163b8efc9c6bff71410cc7c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 28 Feb 2023 15:43:59 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes:
-arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dtb: leds@800: 'led-lan@19', 'led-power@11', 'led-wan-red@12', 'led-wan-white@15', 'led-wps@14' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+'
-        From schema: Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/all/20230228144400.21689-2-zajec5@gmail.com/
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts     | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
-@@ -120,7 +120,7 @@
- };
- 
- &leds {
--	led-power@11 {
-+	led@11 {
- 		reg = <0x11>;
- 		function = LED_FUNCTION_POWER;
- 		color = <LED_COLOR_ID_WHITE>;
-@@ -130,7 +130,7 @@
- 		pinctrl-0 = <&pins_led_17_a>;
- 	};
- 
--	led-wan-red@12 {
-+	led@12 {
- 		reg = <0x12>;
- 		function = LED_FUNCTION_WAN;
- 		color = <LED_COLOR_ID_RED>;
-@@ -139,7 +139,7 @@
- 		pinctrl-0 = <&pins_led_18_a>;
- 	};
- 
--	led-wps@14 {
-+	led@14 {
- 		reg = <0x14>;
- 		function = LED_FUNCTION_WPS;
- 		color = <LED_COLOR_ID_WHITE>;
-@@ -148,7 +148,7 @@
- 		pinctrl-0 = <&pins_led_20_a>;
- 	};
- 
--	led-wan-white@15 {
-+	led@15 {
- 		reg = <0x15>;
- 		function = LED_FUNCTION_WAN;
- 		color = <LED_COLOR_ID_WHITE>;
-@@ -157,7 +157,7 @@
- 		pinctrl-0 = <&pins_led_21_a>;
- 	};
- 
--	led-lan@19 {
-+	led@19 {
- 		reg = <0x19>;
- 		function = LED_FUNCTION_LAN;
- 		color = <LED_COLOR_ID_WHITE>;
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch
deleted file mode 100644
index a469a32a2c0c..000000000000
--- a/target/linux/bcm4908/patches-5.10/040-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From f16a8294dd7a02c7ad042cd2e3acc5ea06698dc1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 28 Feb 2023 15:44:00 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes:
-arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: syscon@280000: $nodename:0: 'syscon@280000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
-        From schema: schemas/simple-bus.yaml
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/all/20230228144400.21689-3-zajec5@gmail.com/
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -260,7 +260,7 @@
- 			};
- 		};
- 
--		procmon: syscon@280000 {
-+		procmon: bus@280000 {
- 			compatible = "simple-bus";
- 			reg = <0x280000 0x1000>;
- 			ranges;
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0005-arm64-dts-broadcom-bcmbca-bcm4908-add-on-SoC-USB-por.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0005-arm64-dts-broadcom-bcmbca-bcm4908-add-on-SoC-USB-por.patch
deleted file mode 100644
index 47b2455ae63f..000000000000
--- a/target/linux/bcm4908/patches-5.10/040-v6.4-0005-arm64-dts-broadcom-bcmbca-bcm4908-add-on-SoC-USB-por.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 477cad715de1dfc256a20da3ed83b62f3cb2944d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 28 Feb 2023 15:45:18 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add on-SoC USB ports
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has 3 USB controllers each with 2 USB ports. Home routers often
-have LEDs indicating state of selected USB ports. Describe those SoC USB
-ports to allow using them as LED trigger sources.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/all/20230228144520.21816-1-zajec5@gmail.com/
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcmbca/bcm4908.dtsi     | 39 +++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -148,6 +148,19 @@
- 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- 			phys = <&usb_phy PHY_TYPE_USB2>;
- 			status = "disabled";
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			ehci_port1: port@1 {
-+				reg = <1>;
-+				#trigger-source-cells = <0>;
-+			};
-+
-+			ehci_port2: port@2 {
-+				reg = <2>;
-+				#trigger-source-cells = <0>;
-+			};
- 		};
- 
- 		ohci: usb@c400 {
-@@ -156,6 +169,19 @@
- 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- 			phys = <&usb_phy PHY_TYPE_USB2>;
- 			status = "disabled";
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			ohci_port1: port@1 {
-+				reg = <1>;
-+				#trigger-source-cells = <0>;
-+			};
-+
-+			ohci_port2: port@2 {
-+				reg = <2>;
-+				#trigger-source-cells = <0>;
-+			};
- 		};
- 
- 		xhci: usb@d000 {
-@@ -164,6 +190,19 @@
- 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- 			phys = <&usb_phy PHY_TYPE_USB3>;
- 			status = "disabled";
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			xhci_port1: port@1 {
-+				reg = <1>;
-+				#trigger-source-cells = <0>;
-+			};
-+
-+			xhci_port2: port@2 {
-+				reg = <2>;
-+				#trigger-source-cells = <0>;
-+			};
- 		};
- 
- 		bus@80000 {
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0006-arm64-dts-broadcom-bcmbca-bcm4908-add-Netgear-R8000P.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0006-arm64-dts-broadcom-bcmbca-bcm4908-add-Netgear-R8000P.patch
deleted file mode 100644
index 3e210d68e11a..000000000000
--- a/target/linux/bcm4908/patches-5.10/040-v6.4-0006-arm64-dts-broadcom-bcmbca-bcm4908-add-Netgear-R8000P.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 889e53ccccc29ff4bf8d4c89cca34e8768845747 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 28 Feb 2023 15:45:19 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add Netgear R8000P USB
- LED triggers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This device has 2 USB LEDs meant to be triggered by devices in relevant
-USB ports.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/all/20230228144520.21816-2-zajec5@gmail.com/
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
-@@ -58,12 +58,16 @@
- 			function = "usb2";
- 			color = <LED_COLOR_ID_WHITE>;
- 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+			linux,default-trigger = "usbport";
- 		};
- 
- 		led-usb3 {
- 			function = "usb3";
- 			color = <LED_COLOR_ID_WHITE>;
- 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
-+			linux,default-trigger = "usbport";
- 		};
- 
- 		led-wifi {
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0007-arm64-dts-broadcom-bcmbca-bcm4908-add-TP-Link-C2300-.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0007-arm64-dts-broadcom-bcmbca-bcm4908-add-TP-Link-C2300-.patch
deleted file mode 100644
index 959ccd4fa349..000000000000
--- a/target/linux/bcm4908/patches-5.10/040-v6.4-0007-arm64-dts-broadcom-bcmbca-bcm4908-add-TP-Link-C2300-.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From e6d356b146b75f1f77621aab7950a1eb550859f9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 28 Feb 2023 15:45:20 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add TP-Link C2300 USB
- LED triggers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This device has 2 USB LEDs meant to be triggered by devices in relevant
-USB ports.
-
-While at it fix typo in USB LED name.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/all/20230228144520.21816-3-zajec5@gmail.com/
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts  | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
-@@ -64,12 +64,16 @@
- 			function = "usb2";
- 			color = <LED_COLOR_ID_BLUE>;
- 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+			linux,default-trigger = "usbport";
- 		};
- 
- 		led-usb3 {
--			function = "usbd3";
-+			function = "usb3";
- 			color = <LED_COLOR_ID_BLUE>;
- 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
-+			linux,default-trigger = "usbport";
- 		};
- 
- 		led-brightness {
diff --git a/target/linux/bcm4908/patches-5.10/071-v5.12-0001-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch b/target/linux/bcm4908/patches-5.10/071-v5.12-0001-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch
deleted file mode 100644
index 344093c5483d..000000000000
--- a/target/linux/bcm4908/patches-5.10/071-v5.12-0001-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From 73b7a6047971aa6ce4a70fc4901964d14f077171 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 6 Jan 2021 22:32:02 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: support BCM4908's integrated switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 family SoCs come with integrated Starfighter 2 switch. Its
-registers layout it a mix of BCM7278 and BCM7445. It has 5 integrated
-PHYs and 8 ports. It also supports RGMII and SerDes.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210106213202.17459-3-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/b53/b53_common.c | 14 +++++++++++++
- drivers/net/dsa/b53/b53_priv.h   |  1 +
- drivers/net/dsa/bcm_sf2.c        | 36 +++++++++++++++++++++++++++++---
- drivers/net/dsa/bcm_sf2_regs.h   |  1 +
- 4 files changed, 49 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -2493,6 +2493,22 @@ static const struct b53_chip_data b53_sw
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
- 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
- 	},
-+	/* Starfighter 2 */
-+	{
-+		.chip_id = BCM4908_DEVICE_ID,
-+		.dev_name = "BCM4908",
-+		.vlans = 4096,
-+		.enabled_ports = 0x1bf,
-+#if 0
-+		.arl_bins = 4,
-+		.arl_buckets = 256,
-+#endif
-+		.cpu_port = 8, /* TODO: ports 4, 5, 8 */
-+		.vta_regs = B53_VTA_REGS,
-+		.duplex_reg = B53_DUPLEX_STAT_GE,
-+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
-+	},
- 	{
- 		.chip_id = BCM7445_DEVICE_ID,
- 		.dev_name = "BCM7445",
---- a/drivers/net/dsa/b53/b53_priv.h
-+++ b/drivers/net/dsa/b53/b53_priv.h
-@@ -64,6 +64,7 @@ struct b53_io_ops {
- #define B53_INVALID_LANE	0xff
- 
- enum {
-+	BCM4908_DEVICE_ID = 0x4908,
- 	BCM5325_DEVICE_ID = 0x25,
- 	BCM5365_DEVICE_ID = 0x65,
- 	BCM5389_DEVICE_ID = 0x89,
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -105,7 +105,8 @@ static void bcm_sf2_imp_setup(struct dsa
- 	b53_brcm_hdr_setup(ds, port);
- 
- 	if (port == 8) {
--		if (priv->type == BCM7445_DEVICE_ID)
-+		if (priv->type == BCM4908_DEVICE_ID ||
-+		    priv->type == BCM7445_DEVICE_ID)
- 			offset = CORE_STS_OVERRIDE_IMP;
- 		else
- 			offset = CORE_STS_OVERRIDE_IMP2;
-@@ -714,7 +715,8 @@ static void bcm_sf2_sw_mac_link_down(str
- 		return;
- 
- 	if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
--		if (priv->type == BCM7445_DEVICE_ID)
-+		if (priv->type == BCM4908_DEVICE_ID ||
-+		    priv->type == BCM7445_DEVICE_ID)
- 			offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
- 		else
- 			offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
-@@ -741,7 +743,8 @@ static void bcm_sf2_sw_mac_link_up(struc
- 	bcm_sf2_sw_mac_link_set(ds, port, interface, true);
- 
- 	if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
--		if (priv->type == BCM7445_DEVICE_ID)
-+		if (priv->type == BCM4908_DEVICE_ID ||
-+		    priv->type == BCM7445_DEVICE_ID)
- 			offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
- 		else
- 			offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
-@@ -1139,6 +1142,30 @@ struct bcm_sf2_of_data {
- 	unsigned int num_cfp_rules;
- };
- 
-+static const u16 bcm_sf2_4908_reg_offsets[] = {
-+	[REG_SWITCH_CNTRL]	= 0x00,
-+	[REG_SWITCH_STATUS]	= 0x04,
-+	[REG_DIR_DATA_WRITE]	= 0x08,
-+	[REG_DIR_DATA_READ]	= 0x0c,
-+	[REG_SWITCH_REVISION]	= 0x10,
-+	[REG_PHY_REVISION]	= 0x14,
-+	[REG_SPHY_CNTRL]	= 0x24,
-+	[REG_CROSSBAR]		= 0xc8,
-+	[REG_RGMII_0_CNTRL]	= 0xe0,
-+	[REG_RGMII_1_CNTRL]	= 0xec,
-+	[REG_RGMII_2_CNTRL]	= 0xf8,
-+	[REG_LED_0_CNTRL]	= 0x40,
-+	[REG_LED_1_CNTRL]	= 0x4c,
-+	[REG_LED_2_CNTRL]	= 0x58,
-+};
-+
-+static const struct bcm_sf2_of_data bcm_sf2_4908_data = {
-+	.type		= BCM4908_DEVICE_ID,
-+	.core_reg_align	= 0,
-+	.reg_offsets	= bcm_sf2_4908_reg_offsets,
-+	.num_cfp_rules	= 0, /* FIXME */
-+};
-+
- /* Register offsets for the SWITCH_REG_* block */
- static const u16 bcm_sf2_7445_reg_offsets[] = {
- 	[REG_SWITCH_CNTRL]	= 0x00,
-@@ -1187,6 +1214,9 @@ static const struct bcm_sf2_of_data bcm_
- };
- 
- static const struct of_device_id bcm_sf2_of_match[] = {
-+	{ .compatible = "brcm,bcm4908-switch",
-+	  .data = &bcm_sf2_4908_data
-+	},
- 	{ .compatible = "brcm,bcm7445-switch-v4.0",
- 	  .data = &bcm_sf2_7445_data
- 	},
---- a/drivers/net/dsa/bcm_sf2_regs.h
-+++ b/drivers/net/dsa/bcm_sf2_regs.h
-@@ -17,6 +17,7 @@ enum bcm_sf2_reg_offs {
- 	REG_SWITCH_REVISION,
- 	REG_PHY_REVISION,
- 	REG_SPHY_CNTRL,
-+	REG_CROSSBAR,
- 	REG_RGMII_0_CNTRL,
- 	REG_RGMII_1_CNTRL,
- 	REG_RGMII_2_CNTRL,
diff --git a/target/linux/bcm4908/patches-5.10/071-v5.12-0002-net-dsa-bcm_sf2-use-2-Gbps-IMP-port-link-on-BCM4908.patch b/target/linux/bcm4908/patches-5.10/071-v5.12-0002-net-dsa-bcm_sf2-use-2-Gbps-IMP-port-link-on-BCM4908.patch
deleted file mode 100644
index 7785e0c03609..000000000000
--- a/target/linux/bcm4908/patches-5.10/071-v5.12-0002-net-dsa-bcm_sf2-use-2-Gbps-IMP-port-link-on-BCM4908.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 8373a0fe9c7160a55482effa8a3f725efd3f8434 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 10 Mar 2021 13:51:59 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: use 2 Gbps IMP port link on BCM4908
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 uses 2 Gbps link between switch and the Ethernet interface.
-Without this BCM4908 devices were able to achieve only 2 x ~895 Mb/s.
-This allows handling e.g. NAT traffic with 940 Mb/s.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -114,7 +114,10 @@ static void bcm_sf2_imp_setup(struct dsa
- 		/* Force link status for IMP port */
- 		reg = core_readl(priv, offset);
- 		reg |= (MII_SW_OR | LINK_STS);
--		reg &= ~GMII_SPEED_UP_2G;
-+		if (priv->type == BCM4908_DEVICE_ID)
-+			reg |= GMII_SPEED_UP_2G;
-+		else
-+			reg &= ~GMII_SPEED_UP_2G;
- 		core_writel(priv, reg, offset);
- 
- 		/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
diff --git a/target/linux/bcm4908/patches-5.10/072-v5.12-0001-dt-bindings-net-document-BCM4908-Ethernet-controller.patch b/target/linux/bcm4908/patches-5.10/072-v5.12-0001-dt-bindings-net-document-BCM4908-Ethernet-controller.patch
deleted file mode 100644
index 8c60b9706ed0..000000000000
--- a/target/linux/bcm4908/patches-5.10/072-v5.12-0001-dt-bindings-net-document-BCM4908-Ethernet-controller.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 387d1c1819790aa8398c7cffab587f9a050a0d1a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 7 Feb 2021 23:26:31 +0100
-Subject: [PATCH] dt-bindings: net: document BCM4908 Ethernet controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 is a family of SoCs with integrated Ethernet controller.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../bindings/net/brcm,bcm4908enet.yaml        | 45 +++++++++++++++++++
- 1 file changed, 45 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
-@@ -0,0 +1,45 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/brcm,bcm4908enet.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom BCM4908 Ethernet controller
-+
-+description: Broadcom's Ethernet controller integrated into BCM4908 family SoCs
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    const: brcm,bcm4908enet
-+
-+  reg:
-+    maxItems: 1
-+
-+  interrupts:
-+    description: RX interrupt
-+
-+  interrupt-names:
-+    const: rx
-+
-+required:
-+  - reg
-+  - interrupts
-+  - interrupt-names
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/interrupt-controller/irq.h>
-+    #include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+    ethernet@80002000 {
-+        compatible = "brcm,bcm4908enet";
-+        reg = <0x80002000 0x1000>;
-+
-+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+        interrupt-names = "rx";
-+    };
diff --git a/target/linux/bcm4908/patches-5.10/072-v5.12-0002-net-broadcom-bcm4908enet-add-BCM4908-controller-driv.patch b/target/linux/bcm4908/patches-5.10/072-v5.12-0002-net-broadcom-bcm4908enet-add-BCM4908-controller-driv.patch
deleted file mode 100644
index 958ef85f9ebb..000000000000
--- a/target/linux/bcm4908/patches-5.10/072-v5.12-0002-net-broadcom-bcm4908enet-add-BCM4908-controller-driv.patch
+++ /dev/null
@@ -1,847 +0,0 @@
-From 4feffeadbcb2e5b11cbbf191a33c245b74a5837b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 7 Feb 2021 23:26:32 +0100
-Subject: [PATCH] net: broadcom: bcm4908enet: add BCM4908 controller driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 SoCs family uses Ethernel controller that includes UniMAC but
-uses different DMA engine (than other controllers) and requires
-different programming.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS                                 |   9 +
- drivers/net/ethernet/broadcom/Kconfig       |   8 +
- drivers/net/ethernet/broadcom/Makefile      |   1 +
- drivers/net/ethernet/broadcom/bcm4908enet.c | 676 ++++++++++++++++++++
- drivers/net/ethernet/broadcom/bcm4908enet.h |  96 +++
- 5 files changed, 790 insertions(+)
- create mode 100644 drivers/net/ethernet/broadcom/bcm4908enet.c
- create mode 100644 drivers/net/ethernet/broadcom/bcm4908enet.h
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3427,6 +3427,15 @@ F:	Documentation/devicetree/bindings/mip
- F:	arch/mips/bcm47xx/*
- F:	arch/mips/include/asm/mach-bcm47xx/*
- 
-+BROADCOM BCM4908 ETHERNET DRIVER
-+M:	Rafał Miłecki <rafal@milecki.pl>
-+M:	bcm-kernel-feedback-list@broadcom.com
-+L:	netdev@vger.kernel.org
-+S:	Maintained
-+F:	Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
-+F:	drivers/net/ethernet/broadcom/bcm4908enet.*
-+F:	drivers/net/ethernet/broadcom/unimac.h
-+
- BROADCOM BCM5301X ARM ARCHITECTURE
- M:	Hauke Mehrtens <hauke@hauke-m.de>
- M:	Rafał Miłecki <zajec5@gmail.com>
---- a/drivers/net/ethernet/broadcom/Kconfig
-+++ b/drivers/net/ethernet/broadcom/Kconfig
-@@ -51,6 +51,14 @@ config B44_PCI
- 	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
- 	default y
- 
-+config BCM4908ENET
-+	tristate "Broadcom BCM4908 internal mac support"
-+	depends on ARCH_BCM4908 || COMPILE_TEST
-+	default y
-+	help
-+	  This driver supports Ethernet controller integrated into Broadcom
-+	  BCM4908 family SoCs.
-+
- config BCM63XX_ENET
- 	tristate "Broadcom 63xx internal mac support"
- 	depends on BCM63XX
---- a/drivers/net/ethernet/broadcom/Makefile
-+++ b/drivers/net/ethernet/broadcom/Makefile
-@@ -4,6 +4,7 @@
- #
- 
- obj-$(CONFIG_B44) += b44.o
-+obj-$(CONFIG_BCM4908ENET) += bcm4908enet.o
- obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
- obj-$(CONFIG_BCMGENET) += genet/
- obj-$(CONFIG_BNX2) += bnx2.o
---- /dev/null
-+++ b/drivers/net/ethernet/broadcom/bcm4908enet.c
-@@ -0,0 +1,676 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/etherdevice.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+
-+#include "bcm4908enet.h"
-+#include "unimac.h"
-+
-+#define ENET_DMA_CH_RX_CFG			ENET_DMA_CH0_CFG
-+#define ENET_DMA_CH_TX_CFG			ENET_DMA_CH1_CFG
-+#define ENET_DMA_CH_RX_STATE_RAM		ENET_DMA_CH0_STATE_RAM
-+#define ENET_DMA_CH_TX_STATE_RAM		ENET_DMA_CH1_STATE_RAM
-+
-+#define ENET_TX_BDS_NUM				200
-+#define ENET_RX_BDS_NUM				200
-+#define ENET_RX_BDS_NUM_MAX			8192
-+
-+#define ENET_DMA_INT_DEFAULTS			(ENET_DMA_CH_CFG_INT_DONE | \
-+						 ENET_DMA_CH_CFG_INT_NO_DESC | \
-+						 ENET_DMA_CH_CFG_INT_BUFF_DONE)
-+#define ENET_DMA_MAX_BURST_LEN			8 /* in 64 bit words */
-+
-+#define ENET_MTU_MIN				60
-+#define ENET_MTU_MAX				1500 /* Is it possible to support 2044? */
-+#define ENET_MTU_MAX_EXTRA_SIZE			32 /* L2 */
-+
-+struct bcm4908enet_dma_ring_bd {
-+	__le32 ctl;
-+	__le32 addr;
-+} __packed;
-+
-+struct bcm4908enet_dma_ring_slot {
-+	struct sk_buff *skb;
-+	unsigned int len;
-+	dma_addr_t dma_addr;
-+};
-+
-+struct bcm4908enet_dma_ring {
-+	int is_tx;
-+	int read_idx;
-+	int write_idx;
-+	int length;
-+	u16 cfg_block;
-+	u16 st_ram_block;
-+
-+	union {
-+		void *cpu_addr;
-+		struct bcm4908enet_dma_ring_bd *buf_desc;
-+	};
-+	dma_addr_t dma_addr;
-+
-+	struct bcm4908enet_dma_ring_slot *slots;
-+};
-+
-+struct bcm4908enet {
-+	struct device *dev;
-+	struct net_device *netdev;
-+	struct napi_struct napi;
-+	void __iomem *base;
-+
-+	struct bcm4908enet_dma_ring tx_ring;
-+	struct bcm4908enet_dma_ring rx_ring;
-+};
-+
-+/***
-+ * R/W ops
-+ */
-+
-+static inline u32 enet_read(struct bcm4908enet *enet, u16 offset)
-+{
-+	return readl(enet->base + offset);
-+}
-+
-+static inline void enet_write(struct bcm4908enet *enet, u16 offset, u32 value)
-+{
-+	writel(value, enet->base + offset);
-+}
-+
-+static inline void enet_maskset(struct bcm4908enet *enet, u16 offset, u32 mask, u32 set)
-+{
-+	u32 val;
-+
-+	WARN_ON(set & ~mask);
-+
-+	val = enet_read(enet, offset);
-+	val = (val & ~mask) | (set & mask);
-+	enet_write(enet, offset, val);
-+}
-+
-+static inline void enet_set(struct bcm4908enet *enet, u16 offset, u32 set)
-+{
-+	enet_maskset(enet, offset, set, set);
-+}
-+
-+static inline u32 enet_umac_read(struct bcm4908enet *enet, u16 offset)
-+{
-+	return enet_read(enet, ENET_UNIMAC + offset);
-+}
-+
-+static inline void enet_umac_write(struct bcm4908enet *enet, u16 offset, u32 value)
-+{
-+	enet_write(enet, ENET_UNIMAC + offset, value);
-+}
-+
-+static inline void enet_umac_maskset(struct bcm4908enet *enet, u16 offset, u32 mask, u32 set)
-+{
-+	enet_maskset(enet, ENET_UNIMAC + offset, mask, set);
-+}
-+
-+static inline void enet_umac_set(struct bcm4908enet *enet, u16 offset, u32 set)
-+{
-+	enet_set(enet, ENET_UNIMAC + offset, set);
-+}
-+
-+/***
-+ * Helpers
-+ */
-+
-+static void bcm4908enet_intrs_on(struct bcm4908enet *enet)
-+{
-+	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, ENET_DMA_INT_DEFAULTS);
-+}
-+
-+static void bcm4908enet_intrs_off(struct bcm4908enet *enet)
-+{
-+	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, 0);
-+}
-+
-+static void bcm4908enet_intrs_ack(struct bcm4908enet *enet)
-+{
-+	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
-+}
-+
-+/***
-+ * DMA
-+ */
-+
-+static int bcm4908_dma_alloc_buf_descs(struct bcm4908enet *enet, struct bcm4908enet_dma_ring *ring)
-+{
-+	int size = ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
-+	struct device *dev = enet->dev;
-+
-+	ring->cpu_addr = dma_alloc_coherent(dev, size, &ring->dma_addr, GFP_KERNEL);
-+	if (!ring->cpu_addr)
-+		return -ENOMEM;
-+
-+	if (((uintptr_t)ring->cpu_addr) & (0x40 - 1)) {
-+		dev_err(dev, "Invalid DMA ring alignment\n");
-+		goto err_free_buf_descs;
-+	}
-+
-+	ring->slots = kzalloc(ring->length * sizeof(*ring->slots), GFP_KERNEL);
-+	if (!ring->slots)
-+		goto err_free_buf_descs;
-+
-+	memset(ring->cpu_addr, 0, size);
-+
-+	ring->read_idx = 0;
-+	ring->write_idx = 0;
-+
-+	return 0;
-+
-+err_free_buf_descs:
-+	dma_free_coherent(dev, size, ring->cpu_addr, ring->dma_addr);
-+	return -ENOMEM;
-+}
-+
-+static void bcm4908enet_dma_free(struct bcm4908enet *enet)
-+{
-+	struct bcm4908enet_dma_ring *tx_ring = &enet->tx_ring;
-+	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct device *dev = enet->dev;
-+	int size;
-+
-+	size = rx_ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
-+	if (rx_ring->cpu_addr)
-+		dma_free_coherent(dev, size, rx_ring->cpu_addr, rx_ring->dma_addr);
-+	kfree(rx_ring->slots);
-+
-+	size = tx_ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
-+	if (tx_ring->cpu_addr)
-+		dma_free_coherent(dev, size, tx_ring->cpu_addr, tx_ring->dma_addr);
-+	kfree(tx_ring->slots);
-+}
-+
-+static int bcm4908enet_dma_alloc(struct bcm4908enet *enet)
-+{
-+	struct bcm4908enet_dma_ring *tx_ring = &enet->tx_ring;
-+	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct device *dev = enet->dev;
-+	int err;
-+
-+	tx_ring->length = ENET_TX_BDS_NUM;
-+	tx_ring->is_tx = 1;
-+	tx_ring->cfg_block = ENET_DMA_CH_TX_CFG;
-+	tx_ring->st_ram_block = ENET_DMA_CH_TX_STATE_RAM;
-+	err = bcm4908_dma_alloc_buf_descs(enet, tx_ring);
-+	if (err) {
-+		dev_err(dev, "Failed to alloc TX buf descriptors: %d\n", err);
-+		return err;
-+	}
-+
-+	rx_ring->length = ENET_RX_BDS_NUM;
-+	rx_ring->is_tx = 0;
-+	rx_ring->cfg_block = ENET_DMA_CH_RX_CFG;
-+	rx_ring->st_ram_block = ENET_DMA_CH_RX_STATE_RAM;
-+	err = bcm4908_dma_alloc_buf_descs(enet, rx_ring);
-+	if (err) {
-+		dev_err(dev, "Failed to alloc RX buf descriptors: %d\n", err);
-+		bcm4908enet_dma_free(enet);
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+
-+static void bcm4908enet_dma_reset(struct bcm4908enet *enet)
-+{
-+	struct bcm4908enet_dma_ring *rings[] = { &enet->rx_ring, &enet->tx_ring };
-+	int i;
-+
-+	/* Disable the DMA controller and channel */
-+	for (i = 0; i < ARRAY_SIZE(rings); i++)
-+		enet_write(enet, rings[i]->cfg_block + ENET_DMA_CH_CFG, 0);
-+	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN, 0);
-+
-+	/* Reset channels state */
-+	for (i = 0; i < ARRAY_SIZE(rings); i++) {
-+		struct bcm4908enet_dma_ring *ring = rings[i];
-+
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR, 0);
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_STATE_DATA, 0);
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS, 0);
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR, 0);
-+	}
-+}
-+
-+static int bcm4908enet_dma_alloc_rx_buf(struct bcm4908enet *enet, unsigned int idx)
-+{
-+	struct bcm4908enet_dma_ring_bd *buf_desc = &enet->rx_ring.buf_desc[idx];
-+	struct bcm4908enet_dma_ring_slot *slot = &enet->rx_ring.slots[idx];
-+	struct device *dev = enet->dev;
-+	u32 tmp;
-+	int err;
-+
-+	slot->len = ENET_MTU_MAX + ENET_MTU_MAX_EXTRA_SIZE;
-+
-+	slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
-+	if (!slot->skb)
-+		return -ENOMEM;
-+
-+	slot->dma_addr = dma_map_single(dev, slot->skb->data, slot->len, DMA_FROM_DEVICE);
-+	err = dma_mapping_error(dev, slot->dma_addr);
-+	if (err) {
-+		dev_err(dev, "Failed to map DMA buffer: %d\n", err);
-+		kfree_skb(slot->skb);
-+		slot->skb = NULL;
-+		return err;
-+	}
-+
-+	tmp = slot->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+	tmp |= DMA_CTL_STATUS_OWN;
-+	if (idx == enet->rx_ring.length - 1)
-+		tmp |= DMA_CTL_STATUS_WRAP;
-+	buf_desc->ctl = cpu_to_le32(tmp);
-+	buf_desc->addr = cpu_to_le32(slot->dma_addr);
-+
-+	return 0;
-+}
-+
-+static void bcm4908enet_dma_ring_init(struct bcm4908enet *enet,
-+				      struct bcm4908enet_dma_ring *ring)
-+{
-+	int reset_channel = 0; /* We support only 1 main channel (with TX and RX) */
-+	int reset_subch = ring->is_tx ? 1 : 0;
-+
-+	/* Reset the DMA channel */
-+	enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, BIT(reset_channel * 2 + reset_subch));
-+	enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, 0);
-+
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_MAX_BURST, ENET_DMA_MAX_BURST_LEN);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_MASK, 0);
-+
-+	enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR,
-+		   (uint32_t)ring->dma_addr);
-+}
-+
-+static void bcm4908enet_dma_uninit(struct bcm4908enet *enet)
-+{
-+	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct bcm4908enet_dma_ring_slot *slot;
-+	struct device *dev = enet->dev;
-+	int i;
-+
-+	for (i = rx_ring->length - 1; i >= 0; i--) {
-+		slot = &rx_ring->slots[i];
-+		if (!slot->skb)
-+			continue;
-+		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_FROM_DEVICE);
-+		kfree_skb(slot->skb);
-+		slot->skb = NULL;
-+	}
-+}
-+
-+static int bcm4908enet_dma_init(struct bcm4908enet *enet)
-+{
-+	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct device *dev = enet->dev;
-+	int err;
-+	int i;
-+
-+	for (i = 0; i < rx_ring->length; i++) {
-+		err = bcm4908enet_dma_alloc_rx_buf(enet, i);
-+		if (err) {
-+			dev_err(dev, "Failed to alloc RX buffer: %d\n", err);
-+			bcm4908enet_dma_uninit(enet);
-+			return err;
-+		}
-+	}
-+
-+	bcm4908enet_dma_ring_init(enet, &enet->tx_ring);
-+	bcm4908enet_dma_ring_init(enet, &enet->rx_ring);
-+
-+	return 0;
-+}
-+
-+static void bcm4908enet_dma_tx_ring_ensable(struct bcm4908enet *enet,
-+					    struct bcm4908enet_dma_ring *ring)
-+{
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
-+}
-+
-+static void bcm4908enet_dma_tx_ring_disable(struct bcm4908enet *enet,
-+					    struct bcm4908enet_dma_ring *ring)
-+{
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
-+}
-+
-+static void bcm4908enet_dma_rx_ring_enable(struct bcm4908enet *enet,
-+					   struct bcm4908enet_dma_ring *ring)
-+{
-+	enet_set(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
-+}
-+
-+static void bcm4908enet_dma_rx_ring_disable(struct bcm4908enet *enet,
-+					    struct bcm4908enet_dma_ring *ring)
-+{
-+	unsigned long deadline;
-+	u32 tmp;
-+
-+	enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
-+
-+	deadline = jiffies + usecs_to_jiffies(2000);
-+	do {
-+		tmp = enet_read(enet, ring->cfg_block + ENET_DMA_CH_CFG);
-+		if (!(tmp & ENET_DMA_CH_CFG_ENABLE))
-+			return;
-+		enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
-+		usleep_range(10, 30);
-+	} while (!time_after_eq(jiffies, deadline));
-+
-+	dev_warn(enet->dev, "Timeout waiting for DMA TX stop\n");
-+}
-+
-+/***
-+ * Ethernet driver
-+ */
-+
-+static void bcm4908enet_gmac_init(struct bcm4908enet *enet)
-+{
-+	u32 cmd;
-+
-+	cmd = enet_umac_read(enet, UMAC_CMD);
-+	enet_umac_write(enet, UMAC_CMD, cmd | CMD_SW_RESET);
-+	enet_umac_write(enet, UMAC_CMD, cmd & ~CMD_SW_RESET);
-+
-+	enet_set(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH);
-+	enet_maskset(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH, 0);
-+
-+	enet_set(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB);
-+	enet_maskset(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB, 0);
-+
-+	cmd = enet_umac_read(enet, UMAC_CMD);
-+	cmd &= ~(CMD_SPEED_MASK << CMD_SPEED_SHIFT);
-+	cmd &= ~CMD_TX_EN;
-+	cmd &= ~CMD_RX_EN;
-+	cmd |= CMD_SPEED_1000 << CMD_SPEED_SHIFT;
-+	enet_umac_write(enet, UMAC_CMD, cmd);
-+
-+	enet_maskset(enet, ENET_GMAC_STATUS,
-+		     ENET_GMAC_STATUS_ETH_SPEED_MASK |
-+		     ENET_GMAC_STATUS_HD |
-+		     ENET_GMAC_STATUS_AUTO_CFG_EN |
-+		     ENET_GMAC_STATUS_LINK_UP,
-+		     ENET_GMAC_STATUS_ETH_SPEED_1000 |
-+		     ENET_GMAC_STATUS_AUTO_CFG_EN |
-+		     ENET_GMAC_STATUS_LINK_UP);
-+}
-+
-+static irqreturn_t bcm4908enet_irq_handler(int irq, void *dev_id)
-+{
-+	struct bcm4908enet *enet = dev_id;
-+
-+	bcm4908enet_intrs_off(enet);
-+	bcm4908enet_intrs_ack(enet);
-+
-+	napi_schedule(&enet->napi);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int bcm4908enet_open(struct net_device *netdev)
-+{
-+	struct bcm4908enet *enet = netdev_priv(netdev);
-+	struct device *dev = enet->dev;
-+	int err;
-+
-+	err = request_irq(netdev->irq, bcm4908enet_irq_handler, 0, "enet", enet);
-+	if (err) {
-+		dev_err(dev, "Failed to request IRQ %d: %d\n", netdev->irq, err);
-+		return err;
-+	}
-+
-+	bcm4908enet_gmac_init(enet);
-+	bcm4908enet_dma_reset(enet);
-+	bcm4908enet_dma_init(enet);
-+
-+	enet_umac_set(enet, UMAC_CMD, CMD_TX_EN | CMD_RX_EN);
-+
-+	enet_set(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN);
-+	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_FLOWC_CH1_EN, 0);
-+	bcm4908enet_dma_rx_ring_enable(enet, &enet->rx_ring);
-+
-+	napi_enable(&enet->napi);
-+	netif_carrier_on(netdev);
-+	netif_start_queue(netdev);
-+
-+	bcm4908enet_intrs_ack(enet);
-+	bcm4908enet_intrs_on(enet);
-+
-+	return 0;
-+}
-+
-+static int bcm4908enet_stop(struct net_device *netdev)
-+{
-+	struct bcm4908enet *enet = netdev_priv(netdev);
-+
-+	netif_stop_queue(netdev);
-+	netif_carrier_off(netdev);
-+	napi_disable(&enet->napi);
-+
-+	bcm4908enet_dma_rx_ring_disable(enet, &enet->rx_ring);
-+	bcm4908enet_dma_tx_ring_disable(enet, &enet->tx_ring);
-+
-+	bcm4908enet_dma_uninit(enet);
-+
-+	free_irq(enet->netdev->irq, enet);
-+
-+	return 0;
-+}
-+
-+static int bcm4908enet_start_xmit(struct sk_buff *skb, struct net_device *netdev)
-+{
-+	struct bcm4908enet *enet = netdev_priv(netdev);
-+	struct bcm4908enet_dma_ring *ring = &enet->tx_ring;
-+	struct bcm4908enet_dma_ring_slot *slot;
-+	struct device *dev = enet->dev;
-+	struct bcm4908enet_dma_ring_bd *buf_desc;
-+	int free_buf_descs;
-+	u32 tmp;
-+
-+	/* Free transmitted skbs */
-+	while (ring->read_idx != ring->write_idx) {
-+		buf_desc = &ring->buf_desc[ring->read_idx];
-+		if (buf_desc->ctl & DMA_CTL_STATUS_OWN)
-+			break;
-+		slot = &ring->slots[ring->read_idx];
-+
-+		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
-+		dev_kfree_skb(slot->skb);
-+		if (++ring->read_idx == ring->length)
-+			ring->read_idx = 0;
-+	}
-+
-+	/* Don't use the last empty buf descriptor */
-+	if (ring->read_idx <= ring->write_idx)
-+		free_buf_descs = ring->read_idx - ring->write_idx + ring->length;
-+	else
-+		free_buf_descs = ring->read_idx - ring->write_idx;
-+	if (free_buf_descs < 2)
-+		return NETDEV_TX_BUSY;
-+
-+	/* Hardware removes OWN bit after sending data */
-+	buf_desc = &ring->buf_desc[ring->write_idx];
-+	if (unlikely(le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)) {
-+		netif_stop_queue(netdev);
-+		return NETDEV_TX_BUSY;
-+	}
-+
-+	slot = &ring->slots[ring->write_idx];
-+	slot->skb = skb;
-+	slot->len = skb->len;
-+	slot->dma_addr = dma_map_single(dev, skb->data, skb->len, DMA_TO_DEVICE);
-+	if (unlikely(dma_mapping_error(dev, slot->dma_addr)))
-+		return NETDEV_TX_BUSY;
-+
-+	tmp = skb->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+	tmp |= DMA_CTL_STATUS_OWN;
-+	tmp |= DMA_CTL_STATUS_SOP;
-+	tmp |= DMA_CTL_STATUS_EOP;
-+	tmp |= DMA_CTL_STATUS_APPEND_CRC;
-+	if (ring->write_idx + 1 == ring->length - 1)
-+		tmp |= DMA_CTL_STATUS_WRAP;
-+
-+	buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr);
-+	buf_desc->ctl = cpu_to_le32(tmp);
-+
-+	bcm4908enet_dma_tx_ring_ensable(enet, &enet->tx_ring);
-+
-+	if (++ring->write_idx == ring->length - 1)
-+		ring->write_idx = 0;
-+	enet->netdev->stats.tx_bytes += skb->len;
-+	enet->netdev->stats.tx_packets++;
-+
-+	return NETDEV_TX_OK;
-+}
-+
-+static int bcm4908enet_poll(struct napi_struct *napi, int weight)
-+{
-+	struct bcm4908enet *enet = container_of(napi, struct bcm4908enet, napi);
-+	struct device *dev = enet->dev;
-+	int handled = 0;
-+
-+	while (handled < weight) {
-+		struct bcm4908enet_dma_ring_bd *buf_desc;
-+		struct bcm4908enet_dma_ring_slot slot;
-+		u32 ctl;
-+		int len;
-+		int err;
-+
-+		buf_desc = &enet->rx_ring.buf_desc[enet->rx_ring.read_idx];
-+		ctl = le32_to_cpu(buf_desc->ctl);
-+		if (ctl & DMA_CTL_STATUS_OWN)
-+			break;
-+
-+		slot = enet->rx_ring.slots[enet->rx_ring.read_idx];
-+
-+		/* Provide new buffer before unpinning the old one */
-+		err = bcm4908enet_dma_alloc_rx_buf(enet, enet->rx_ring.read_idx);
-+		if (err)
-+			break;
-+
-+		if (++enet->rx_ring.read_idx == enet->rx_ring.length)
-+			enet->rx_ring.read_idx = 0;
-+
-+		len = (ctl & DMA_CTL_LEN_DESC_BUFLENGTH) >> DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+
-+		if (len < ENET_MTU_MIN ||
-+		    (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
-+			enet->netdev->stats.rx_dropped++;
-+			break;
-+		}
-+
-+		dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE);
-+
-+		skb_put(slot.skb, len - 4 + 2);
-+		slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev);
-+		netif_receive_skb(slot.skb);
-+
-+		enet->netdev->stats.rx_packets++;
-+		enet->netdev->stats.rx_bytes += len;
-+	}
-+
-+	if (handled < weight) {
-+		napi_complete_done(napi, handled);
-+		bcm4908enet_intrs_on(enet);
-+	}
-+
-+	return handled;
-+}
-+
-+static const struct net_device_ops bcm96xx_netdev_ops = {
-+	.ndo_open = bcm4908enet_open,
-+	.ndo_stop = bcm4908enet_stop,
-+	.ndo_start_xmit = bcm4908enet_start_xmit,
-+	.ndo_set_mac_address = eth_mac_addr,
-+};
-+
-+static int bcm4908enet_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct net_device *netdev;
-+	struct bcm4908enet *enet;
-+	int err;
-+
-+	netdev = devm_alloc_etherdev(dev, sizeof(*enet));
-+	if (!netdev)
-+		return -ENOMEM;
-+
-+	enet = netdev_priv(netdev);
-+	enet->dev = dev;
-+	enet->netdev = netdev;
-+
-+	enet->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(enet->base)) {
-+		dev_err(dev, "Failed to map registers: %ld\n", PTR_ERR(enet->base));
-+		return PTR_ERR(enet->base);
-+	}
-+
-+	netdev->irq = platform_get_irq_byname(pdev, "rx");
-+	if (netdev->irq < 0)
-+		return netdev->irq;
-+
-+	dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
-+
-+	err = bcm4908enet_dma_alloc(enet);
-+	if (err)
-+		return err;
-+
-+	SET_NETDEV_DEV(netdev, &pdev->dev);
-+	eth_hw_addr_random(netdev);
-+	netdev->netdev_ops = &bcm96xx_netdev_ops;
-+	netdev->min_mtu = ETH_ZLEN;
-+	netdev->mtu = ENET_MTU_MAX;
-+	netdev->max_mtu = ENET_MTU_MAX;
-+	netif_napi_add(netdev, &enet->napi, bcm4908enet_poll, 64);
-+
-+	err = register_netdev(netdev);
-+	if (err) {
-+		bcm4908enet_dma_free(enet);
-+		return err;
-+	}
-+
-+	platform_set_drvdata(pdev, enet);
-+
-+	return 0;
-+}
-+
-+static int bcm4908enet_remove(struct platform_device *pdev)
-+{
-+	struct bcm4908enet *enet = platform_get_drvdata(pdev);
-+
-+	unregister_netdev(enet->netdev);
-+	netif_napi_del(&enet->napi);
-+	bcm4908enet_dma_free(enet);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm4908enet_of_match[] = {
-+	{ .compatible = "brcm,bcm4908enet"},
-+	{},
-+};
-+
-+static struct platform_driver bcm4908enet_driver = {
-+	.driver = {
-+		.name = "bcm4908enet",
-+		.of_match_table = bcm4908enet_of_match,
-+	},
-+	.probe	= bcm4908enet_probe,
-+	.remove = bcm4908enet_remove,
-+};
-+module_platform_driver(bcm4908enet_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DEVICE_TABLE(of, bcm4908enet_of_match);
---- /dev/null
-+++ b/drivers/net/ethernet/broadcom/bcm4908enet.h
-@@ -0,0 +1,96 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+#ifndef __BCM4908ENET_H
-+#define __BCM4908ENET_H
-+
-+#define ENET_CONTROL					0x000
-+#define ENET_MIB_CTRL					0x004
-+#define  ENET_MIB_CTRL_CLR_MIB				0x00000001
-+#define ENET_RX_ERR_MASK				0x008
-+#define ENET_MIB_MAX_PKT_SIZE				0x00C
-+#define  ENET_MIB_MAX_PKT_SIZE_VAL			0x00003fff
-+#define ENET_DIAG_OUT					0x01c
-+#define ENET_ENABLE_DROP_PKT				0x020
-+#define ENET_IRQ_ENABLE					0x024
-+#define  ENET_IRQ_ENABLE_OVFL				0x00000001
-+#define ENET_GMAC_STATUS				0x028
-+#define  ENET_GMAC_STATUS_ETH_SPEED_MASK		0x00000003
-+#define  ENET_GMAC_STATUS_ETH_SPEED_10			0x00000000
-+#define  ENET_GMAC_STATUS_ETH_SPEED_100			0x00000001
-+#define  ENET_GMAC_STATUS_ETH_SPEED_1000		0x00000002
-+#define  ENET_GMAC_STATUS_HD				0x00000004
-+#define  ENET_GMAC_STATUS_AUTO_CFG_EN			0x00000008
-+#define  ENET_GMAC_STATUS_LINK_UP			0x00000010
-+#define ENET_IRQ_STATUS					0x02c
-+#define  ENET_IRQ_STATUS_OVFL				0x00000001
-+#define ENET_OVERFLOW_COUNTER				0x030
-+#define ENET_FLUSH					0x034
-+#define  ENET_FLUSH_RXFIFO_FLUSH			0x00000001
-+#define  ENET_FLUSH_TXFIFO_FLUSH			0x00000002
-+#define ENET_RSV_SELECT					0x038
-+#define ENET_BP_FORCE					0x03c
-+#define  ENET_BP_FORCE_FORCE				0x00000001
-+#define ENET_DMA_RX_OK_TO_SEND_COUNT			0x040
-+#define  ENET_DMA_RX_OK_TO_SEND_COUNT_VAL		0x0000000f
-+#define ENET_TX_CRC_CTRL				0x044
-+#define ENET_MIB					0x200
-+#define ENET_UNIMAC					0x400
-+#define ENET_DMA					0x800
-+#define ENET_DMA_CONTROLLER_CFG				0x800
-+#define  ENET_DMA_CTRL_CFG_MASTER_EN			0x00000001
-+#define  ENET_DMA_CTRL_CFG_FLOWC_CH1_EN			0x00000002
-+#define  ENET_DMA_CTRL_CFG_FLOWC_CH3_EN			0x00000004
-+#define ENET_DMA_FLOWCTL_CH1_THRESH_LO			0x804
-+#define ENET_DMA_FLOWCTL_CH1_THRESH_HI			0x808
-+#define ENET_DMA_FLOWCTL_CH1_ALLOC			0x80c
-+#define  ENET_DMA_FLOWCTL_CH1_ALLOC_FORCE		0x80000000
-+#define ENET_DMA_FLOWCTL_CH3_THRESH_LO			0x810
-+#define ENET_DMA_FLOWCTL_CH3_THRESH_HI			0x814
-+#define ENET_DMA_FLOWCTL_CH3_ALLOC			0x818
-+#define ENET_DMA_FLOWCTL_CH5_THRESH_LO			0x81C
-+#define ENET_DMA_FLOWCTL_CH5_THRESH_HI			0x820
-+#define ENET_DMA_FLOWCTL_CH5_ALLOC			0x824
-+#define ENET_DMA_FLOWCTL_CH7_THRESH_LO			0x828
-+#define ENET_DMA_FLOWCTL_CH7_THRESH_HI			0x82C
-+#define ENET_DMA_FLOWCTL_CH7_ALLOC			0x830
-+#define ENET_DMA_CTRL_CHANNEL_RESET			0x834
-+#define ENET_DMA_CTRL_CHANNEL_DEBUG			0x838
-+#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_STATUS		0x840
-+#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_MASK		0x844
-+#define ENET_DMA_CH0_CFG				0xa00		/* RX */
-+#define ENET_DMA_CH1_CFG				0xa10		/* TX */
-+#define ENET_DMA_CH0_STATE_RAM				0xc00		/* RX */
-+#define ENET_DMA_CH1_STATE_RAM				0xc10		/* TX */
-+
-+#define ENET_DMA_CH_CFG					0x00		/* assorted configuration */
-+#define  ENET_DMA_CH_CFG_ENABLE				0x00000001	/* set to enable channel */
-+#define  ENET_DMA_CH_CFG_PKT_HALT			0x00000002	/* idle after an EOP flag is detected */
-+#define  ENET_DMA_CH_CFG_BURST_HALT			0x00000004	/* idle after finish current memory burst */
-+#define ENET_DMA_CH_CFG_INT_STAT			0x04		/* interrupts control and status */
-+#define ENET_DMA_CH_CFG_INT_MASK			0x08		/* interrupts mask */
-+#define  ENET_DMA_CH_CFG_INT_BUFF_DONE			0x00000001	/* buffer done */
-+#define  ENET_DMA_CH_CFG_INT_DONE			0x00000002	/* packet xfer complete */
-+#define  ENET_DMA_CH_CFG_INT_NO_DESC			0x00000004	/* no valid descriptors */
-+#define  ENET_DMA_CH_CFG_INT_RX_ERROR			0x00000008	/* rxdma detect client protocol error */
-+#define ENET_DMA_CH_CFG_MAX_BURST			0x0c		/* max burst length permitted */
-+#define  ENET_DMA_CH_CFG_MAX_BURST_DESCSIZE_SEL		0x00040000	/* DMA Descriptor Size Selection */
-+#define ENET_DMA_CH_CFG_SIZE				0x10
-+
-+#define ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR		0x00		/* descriptor ring start address */
-+#define ENET_DMA_CH_STATE_RAM_STATE_DATA		0x04		/* state/bytes done/ring offset */
-+#define ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS		0x08		/* buffer descriptor status and len */
-+#define ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR		0x0c		/* buffer descrpitor current processing */
-+#define ENET_DMA_CH_STATE_RAM_SIZE			0x10
-+
-+#define DMA_CTL_STATUS_APPEND_CRC			0x00000100
-+#define DMA_CTL_STATUS_APPEND_BRCM_TAG			0x00000200
-+#define DMA_CTL_STATUS_PRIO				0x00000C00  /* Prio for Tx */
-+#define DMA_CTL_STATUS_WRAP				0x00001000  /* */
-+#define DMA_CTL_STATUS_SOP				0x00002000  /* first buffer in packet */
-+#define DMA_CTL_STATUS_EOP				0x00004000  /* last buffer in packet */
-+#define DMA_CTL_STATUS_OWN				0x00008000  /* cleared by DMA, set by SW */
-+#define DMA_CTL_LEN_DESC_BUFLENGTH			0x0fff0000
-+#define DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT		16
-+#define DMA_CTL_LEN_DESC_MULTICAST			0x40000000
-+#define DMA_CTL_LEN_DESC_USEFPM				0x80000000
-+
-+#endif
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0001-dt-bindings-net-rename-BCM4908-Ethernet-binding.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0001-dt-bindings-net-rename-BCM4908-Ethernet-binding.patch
deleted file mode 100644
index dd297bcf9b8a..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0001-dt-bindings-net-rename-BCM4908-Ethernet-binding.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 6710c5b0674f8811f7d8fbfc526684e7ed77f765 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:32 +0100
-Subject: [PATCH] dt-bindings: net: rename BCM4908 Ethernet binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Rob pointed out that a normal convention is "brcm,bcm4908-enet" so
-update whole binding to match it.
-
-Suggested-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../net/{brcm,bcm4908enet.yaml => brcm,bcm4908-enet.yaml}   | 6 +++---
- MAINTAINERS                                                 | 2 +-
- 2 files changed, 4 insertions(+), 4 deletions(-)
- rename Documentation/devicetree/bindings/net/{brcm,bcm4908enet.yaml => brcm,bcm4908-enet.yaml} (85%)
-
---- a/Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
-+++ /dev/null
-@@ -1,45 +0,0 @@
--# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
--%YAML 1.2
-----
--$id: http://devicetree.org/schemas/net/brcm,bcm4908enet.yaml#
--$schema: http://devicetree.org/meta-schemas/core.yaml#
--
--title: Broadcom BCM4908 Ethernet controller
--
--description: Broadcom's Ethernet controller integrated into BCM4908 family SoCs
--
--maintainers:
--  - Rafał Miłecki <rafal@milecki.pl>
--
--properties:
--  compatible:
--    const: brcm,bcm4908enet
--
--  reg:
--    maxItems: 1
--
--  interrupts:
--    description: RX interrupt
--
--  interrupt-names:
--    const: rx
--
--required:
--  - reg
--  - interrupts
--  - interrupt-names
--
--additionalProperties: false
--
--examples:
--  - |
--    #include <dt-bindings/interrupt-controller/irq.h>
--    #include <dt-bindings/interrupt-controller/arm-gic.h>
--
--    ethernet@80002000 {
--        compatible = "brcm,bcm4908enet";
--        reg = <0x80002000 0x1000>;
--
--        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
--        interrupt-names = "rx";
--    };
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
-@@ -0,0 +1,45 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/brcm,bcm4908-enet.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom BCM4908 Ethernet controller
-+
-+description: Broadcom's Ethernet controller integrated into BCM4908 family SoCs
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    const: brcm,bcm4908-enet
-+
-+  reg:
-+    maxItems: 1
-+
-+  interrupts:
-+    description: RX interrupt
-+
-+  interrupt-names:
-+    const: rx
-+
-+required:
-+  - reg
-+  - interrupts
-+  - interrupt-names
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/interrupt-controller/irq.h>
-+    #include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+    ethernet@80002000 {
-+        compatible = "brcm,bcm4908-enet";
-+        reg = <0x80002000 0x1000>;
-+
-+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+        interrupt-names = "rx";
-+    };
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3432,7 +3432,7 @@ M:	Rafał Miłecki <rafal@milecki.pl>
- M:	bcm-kernel-feedback-list@broadcom.com
- L:	netdev@vger.kernel.org
- S:	Maintained
--F:	Documentation/devicetree/bindings/net/brcm,bcm4908enet.yaml
-+F:	Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
- F:	drivers/net/ethernet/broadcom/bcm4908enet.*
- F:	drivers/net/ethernet/broadcom/unimac.h
- 
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0002-dt-bindings-net-bcm4908-enet-include-ethernet-contro.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0002-dt-bindings-net-bcm4908-enet-include-ethernet-contro.patch
deleted file mode 100644
index a4409a818acc..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0002-dt-bindings-net-bcm4908-enet-include-ethernet-contro.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From f08b5cf1eb1f2aefc6fe4a89c8c757ba94721d0b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:33 +0100
-Subject: [PATCH] dt-bindings: net: bcm4908-enet: include
- ethernet-controller.yaml
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It should be /included/ by every Ethernet controller binding. It adds
-support for various generic properties.
-
-Suggested-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
-+++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
-@@ -11,6 +11,9 @@ description: Broadcom's Ethernet control
- maintainers:
-   - Rafał Miłecki <rafal@milecki.pl>
- 
-+allOf:
-+  - $ref: ethernet-controller.yaml#
-+
- properties:
-   compatible:
-     const: brcm,bcm4908-enet
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0003-net-broadcom-rename-BCM4908-driver-update-DT-binding.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0003-net-broadcom-rename-BCM4908-driver-update-DT-binding.patch
deleted file mode 100644
index 3d22d0e0429e..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0003-net-broadcom-rename-BCM4908-driver-update-DT-binding.patch
+++ /dev/null
@@ -1,1614 +0,0 @@
-From 9d61d138ab30bbfe4a8609853c81e881c4054a0b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:34 +0100
-Subject: [PATCH] net: broadcom: rename BCM4908 driver & update DT binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-compatible string was updated to match normal naming convention so
-update driver as well
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS                                   |   2 +-
- drivers/net/ethernet/broadcom/Kconfig         |   2 +-
- drivers/net/ethernet/broadcom/Makefile        |   2 +-
- .../{bcm4908enet.c => bcm4908_enet.c}         | 215 +++++++++---------
- .../{bcm4908enet.h => bcm4908_enet.h}         |   4 +-
- 5 files changed, 113 insertions(+), 112 deletions(-)
- rename drivers/net/ethernet/broadcom/{bcm4908enet.c => bcm4908_enet.c} (68%)
- rename drivers/net/ethernet/broadcom/{bcm4908enet.h => bcm4908_enet.h} (98%)
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3433,7 +3433,7 @@ M:	bcm-kernel-feedback-list@broadcom.com
- L:	netdev@vger.kernel.org
- S:	Maintained
- F:	Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
--F:	drivers/net/ethernet/broadcom/bcm4908enet.*
-+F:	drivers/net/ethernet/broadcom/bcm4908_enet.*
- F:	drivers/net/ethernet/broadcom/unimac.h
- 
- BROADCOM BCM5301X ARM ARCHITECTURE
---- a/drivers/net/ethernet/broadcom/Kconfig
-+++ b/drivers/net/ethernet/broadcom/Kconfig
-@@ -51,7 +51,7 @@ config B44_PCI
- 	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
- 	default y
- 
--config BCM4908ENET
-+config BCM4908_ENET
- 	tristate "Broadcom BCM4908 internal mac support"
- 	depends on ARCH_BCM4908 || COMPILE_TEST
- 	default y
---- a/drivers/net/ethernet/broadcom/Makefile
-+++ b/drivers/net/ethernet/broadcom/Makefile
-@@ -4,7 +4,7 @@
- #
- 
- obj-$(CONFIG_B44) += b44.o
--obj-$(CONFIG_BCM4908ENET) += bcm4908enet.o
-+obj-$(CONFIG_BCM4908_ENET) += bcm4908_enet.o
- obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
- obj-$(CONFIG_BCMGENET) += genet/
- obj-$(CONFIG_BNX2) += bnx2.o
---- a/drivers/net/ethernet/broadcom/bcm4908enet.c
-+++ /dev/null
-@@ -1,676 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-only
--/*
-- * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-- */
--
--#include <linux/delay.h>
--#include <linux/etherdevice.h>
--#include <linux/interrupt.h>
--#include <linux/module.h>
--#include <linux/of.h>
--#include <linux/platform_device.h>
--#include <linux/slab.h>
--#include <linux/string.h>
--
--#include "bcm4908enet.h"
--#include "unimac.h"
--
--#define ENET_DMA_CH_RX_CFG			ENET_DMA_CH0_CFG
--#define ENET_DMA_CH_TX_CFG			ENET_DMA_CH1_CFG
--#define ENET_DMA_CH_RX_STATE_RAM		ENET_DMA_CH0_STATE_RAM
--#define ENET_DMA_CH_TX_STATE_RAM		ENET_DMA_CH1_STATE_RAM
--
--#define ENET_TX_BDS_NUM				200
--#define ENET_RX_BDS_NUM				200
--#define ENET_RX_BDS_NUM_MAX			8192
--
--#define ENET_DMA_INT_DEFAULTS			(ENET_DMA_CH_CFG_INT_DONE | \
--						 ENET_DMA_CH_CFG_INT_NO_DESC | \
--						 ENET_DMA_CH_CFG_INT_BUFF_DONE)
--#define ENET_DMA_MAX_BURST_LEN			8 /* in 64 bit words */
--
--#define ENET_MTU_MIN				60
--#define ENET_MTU_MAX				1500 /* Is it possible to support 2044? */
--#define ENET_MTU_MAX_EXTRA_SIZE			32 /* L2 */
--
--struct bcm4908enet_dma_ring_bd {
--	__le32 ctl;
--	__le32 addr;
--} __packed;
--
--struct bcm4908enet_dma_ring_slot {
--	struct sk_buff *skb;
--	unsigned int len;
--	dma_addr_t dma_addr;
--};
--
--struct bcm4908enet_dma_ring {
--	int is_tx;
--	int read_idx;
--	int write_idx;
--	int length;
--	u16 cfg_block;
--	u16 st_ram_block;
--
--	union {
--		void *cpu_addr;
--		struct bcm4908enet_dma_ring_bd *buf_desc;
--	};
--	dma_addr_t dma_addr;
--
--	struct bcm4908enet_dma_ring_slot *slots;
--};
--
--struct bcm4908enet {
--	struct device *dev;
--	struct net_device *netdev;
--	struct napi_struct napi;
--	void __iomem *base;
--
--	struct bcm4908enet_dma_ring tx_ring;
--	struct bcm4908enet_dma_ring rx_ring;
--};
--
--/***
-- * R/W ops
-- */
--
--static inline u32 enet_read(struct bcm4908enet *enet, u16 offset)
--{
--	return readl(enet->base + offset);
--}
--
--static inline void enet_write(struct bcm4908enet *enet, u16 offset, u32 value)
--{
--	writel(value, enet->base + offset);
--}
--
--static inline void enet_maskset(struct bcm4908enet *enet, u16 offset, u32 mask, u32 set)
--{
--	u32 val;
--
--	WARN_ON(set & ~mask);
--
--	val = enet_read(enet, offset);
--	val = (val & ~mask) | (set & mask);
--	enet_write(enet, offset, val);
--}
--
--static inline void enet_set(struct bcm4908enet *enet, u16 offset, u32 set)
--{
--	enet_maskset(enet, offset, set, set);
--}
--
--static inline u32 enet_umac_read(struct bcm4908enet *enet, u16 offset)
--{
--	return enet_read(enet, ENET_UNIMAC + offset);
--}
--
--static inline void enet_umac_write(struct bcm4908enet *enet, u16 offset, u32 value)
--{
--	enet_write(enet, ENET_UNIMAC + offset, value);
--}
--
--static inline void enet_umac_maskset(struct bcm4908enet *enet, u16 offset, u32 mask, u32 set)
--{
--	enet_maskset(enet, ENET_UNIMAC + offset, mask, set);
--}
--
--static inline void enet_umac_set(struct bcm4908enet *enet, u16 offset, u32 set)
--{
--	enet_set(enet, ENET_UNIMAC + offset, set);
--}
--
--/***
-- * Helpers
-- */
--
--static void bcm4908enet_intrs_on(struct bcm4908enet *enet)
--{
--	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, ENET_DMA_INT_DEFAULTS);
--}
--
--static void bcm4908enet_intrs_off(struct bcm4908enet *enet)
--{
--	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, 0);
--}
--
--static void bcm4908enet_intrs_ack(struct bcm4908enet *enet)
--{
--	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
--}
--
--/***
-- * DMA
-- */
--
--static int bcm4908_dma_alloc_buf_descs(struct bcm4908enet *enet, struct bcm4908enet_dma_ring *ring)
--{
--	int size = ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
--	struct device *dev = enet->dev;
--
--	ring->cpu_addr = dma_alloc_coherent(dev, size, &ring->dma_addr, GFP_KERNEL);
--	if (!ring->cpu_addr)
--		return -ENOMEM;
--
--	if (((uintptr_t)ring->cpu_addr) & (0x40 - 1)) {
--		dev_err(dev, "Invalid DMA ring alignment\n");
--		goto err_free_buf_descs;
--	}
--
--	ring->slots = kzalloc(ring->length * sizeof(*ring->slots), GFP_KERNEL);
--	if (!ring->slots)
--		goto err_free_buf_descs;
--
--	memset(ring->cpu_addr, 0, size);
--
--	ring->read_idx = 0;
--	ring->write_idx = 0;
--
--	return 0;
--
--err_free_buf_descs:
--	dma_free_coherent(dev, size, ring->cpu_addr, ring->dma_addr);
--	return -ENOMEM;
--}
--
--static void bcm4908enet_dma_free(struct bcm4908enet *enet)
--{
--	struct bcm4908enet_dma_ring *tx_ring = &enet->tx_ring;
--	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
--	struct device *dev = enet->dev;
--	int size;
--
--	size = rx_ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
--	if (rx_ring->cpu_addr)
--		dma_free_coherent(dev, size, rx_ring->cpu_addr, rx_ring->dma_addr);
--	kfree(rx_ring->slots);
--
--	size = tx_ring->length * sizeof(struct bcm4908enet_dma_ring_bd);
--	if (tx_ring->cpu_addr)
--		dma_free_coherent(dev, size, tx_ring->cpu_addr, tx_ring->dma_addr);
--	kfree(tx_ring->slots);
--}
--
--static int bcm4908enet_dma_alloc(struct bcm4908enet *enet)
--{
--	struct bcm4908enet_dma_ring *tx_ring = &enet->tx_ring;
--	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
--	struct device *dev = enet->dev;
--	int err;
--
--	tx_ring->length = ENET_TX_BDS_NUM;
--	tx_ring->is_tx = 1;
--	tx_ring->cfg_block = ENET_DMA_CH_TX_CFG;
--	tx_ring->st_ram_block = ENET_DMA_CH_TX_STATE_RAM;
--	err = bcm4908_dma_alloc_buf_descs(enet, tx_ring);
--	if (err) {
--		dev_err(dev, "Failed to alloc TX buf descriptors: %d\n", err);
--		return err;
--	}
--
--	rx_ring->length = ENET_RX_BDS_NUM;
--	rx_ring->is_tx = 0;
--	rx_ring->cfg_block = ENET_DMA_CH_RX_CFG;
--	rx_ring->st_ram_block = ENET_DMA_CH_RX_STATE_RAM;
--	err = bcm4908_dma_alloc_buf_descs(enet, rx_ring);
--	if (err) {
--		dev_err(dev, "Failed to alloc RX buf descriptors: %d\n", err);
--		bcm4908enet_dma_free(enet);
--		return err;
--	}
--
--	return 0;
--}
--
--static void bcm4908enet_dma_reset(struct bcm4908enet *enet)
--{
--	struct bcm4908enet_dma_ring *rings[] = { &enet->rx_ring, &enet->tx_ring };
--	int i;
--
--	/* Disable the DMA controller and channel */
--	for (i = 0; i < ARRAY_SIZE(rings); i++)
--		enet_write(enet, rings[i]->cfg_block + ENET_DMA_CH_CFG, 0);
--	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN, 0);
--
--	/* Reset channels state */
--	for (i = 0; i < ARRAY_SIZE(rings); i++) {
--		struct bcm4908enet_dma_ring *ring = rings[i];
--
--		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR, 0);
--		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_STATE_DATA, 0);
--		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS, 0);
--		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR, 0);
--	}
--}
--
--static int bcm4908enet_dma_alloc_rx_buf(struct bcm4908enet *enet, unsigned int idx)
--{
--	struct bcm4908enet_dma_ring_bd *buf_desc = &enet->rx_ring.buf_desc[idx];
--	struct bcm4908enet_dma_ring_slot *slot = &enet->rx_ring.slots[idx];
--	struct device *dev = enet->dev;
--	u32 tmp;
--	int err;
--
--	slot->len = ENET_MTU_MAX + ENET_MTU_MAX_EXTRA_SIZE;
--
--	slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
--	if (!slot->skb)
--		return -ENOMEM;
--
--	slot->dma_addr = dma_map_single(dev, slot->skb->data, slot->len, DMA_FROM_DEVICE);
--	err = dma_mapping_error(dev, slot->dma_addr);
--	if (err) {
--		dev_err(dev, "Failed to map DMA buffer: %d\n", err);
--		kfree_skb(slot->skb);
--		slot->skb = NULL;
--		return err;
--	}
--
--	tmp = slot->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
--	tmp |= DMA_CTL_STATUS_OWN;
--	if (idx == enet->rx_ring.length - 1)
--		tmp |= DMA_CTL_STATUS_WRAP;
--	buf_desc->ctl = cpu_to_le32(tmp);
--	buf_desc->addr = cpu_to_le32(slot->dma_addr);
--
--	return 0;
--}
--
--static void bcm4908enet_dma_ring_init(struct bcm4908enet *enet,
--				      struct bcm4908enet_dma_ring *ring)
--{
--	int reset_channel = 0; /* We support only 1 main channel (with TX and RX) */
--	int reset_subch = ring->is_tx ? 1 : 0;
--
--	/* Reset the DMA channel */
--	enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, BIT(reset_channel * 2 + reset_subch));
--	enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, 0);
--
--	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
--	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_MAX_BURST, ENET_DMA_MAX_BURST_LEN);
--	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_MASK, 0);
--
--	enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR,
--		   (uint32_t)ring->dma_addr);
--}
--
--static void bcm4908enet_dma_uninit(struct bcm4908enet *enet)
--{
--	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
--	struct bcm4908enet_dma_ring_slot *slot;
--	struct device *dev = enet->dev;
--	int i;
--
--	for (i = rx_ring->length - 1; i >= 0; i--) {
--		slot = &rx_ring->slots[i];
--		if (!slot->skb)
--			continue;
--		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_FROM_DEVICE);
--		kfree_skb(slot->skb);
--		slot->skb = NULL;
--	}
--}
--
--static int bcm4908enet_dma_init(struct bcm4908enet *enet)
--{
--	struct bcm4908enet_dma_ring *rx_ring = &enet->rx_ring;
--	struct device *dev = enet->dev;
--	int err;
--	int i;
--
--	for (i = 0; i < rx_ring->length; i++) {
--		err = bcm4908enet_dma_alloc_rx_buf(enet, i);
--		if (err) {
--			dev_err(dev, "Failed to alloc RX buffer: %d\n", err);
--			bcm4908enet_dma_uninit(enet);
--			return err;
--		}
--	}
--
--	bcm4908enet_dma_ring_init(enet, &enet->tx_ring);
--	bcm4908enet_dma_ring_init(enet, &enet->rx_ring);
--
--	return 0;
--}
--
--static void bcm4908enet_dma_tx_ring_ensable(struct bcm4908enet *enet,
--					    struct bcm4908enet_dma_ring *ring)
--{
--	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
--}
--
--static void bcm4908enet_dma_tx_ring_disable(struct bcm4908enet *enet,
--					    struct bcm4908enet_dma_ring *ring)
--{
--	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
--}
--
--static void bcm4908enet_dma_rx_ring_enable(struct bcm4908enet *enet,
--					   struct bcm4908enet_dma_ring *ring)
--{
--	enet_set(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
--}
--
--static void bcm4908enet_dma_rx_ring_disable(struct bcm4908enet *enet,
--					    struct bcm4908enet_dma_ring *ring)
--{
--	unsigned long deadline;
--	u32 tmp;
--
--	enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
--
--	deadline = jiffies + usecs_to_jiffies(2000);
--	do {
--		tmp = enet_read(enet, ring->cfg_block + ENET_DMA_CH_CFG);
--		if (!(tmp & ENET_DMA_CH_CFG_ENABLE))
--			return;
--		enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
--		usleep_range(10, 30);
--	} while (!time_after_eq(jiffies, deadline));
--
--	dev_warn(enet->dev, "Timeout waiting for DMA TX stop\n");
--}
--
--/***
-- * Ethernet driver
-- */
--
--static void bcm4908enet_gmac_init(struct bcm4908enet *enet)
--{
--	u32 cmd;
--
--	cmd = enet_umac_read(enet, UMAC_CMD);
--	enet_umac_write(enet, UMAC_CMD, cmd | CMD_SW_RESET);
--	enet_umac_write(enet, UMAC_CMD, cmd & ~CMD_SW_RESET);
--
--	enet_set(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH);
--	enet_maskset(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH, 0);
--
--	enet_set(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB);
--	enet_maskset(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB, 0);
--
--	cmd = enet_umac_read(enet, UMAC_CMD);
--	cmd &= ~(CMD_SPEED_MASK << CMD_SPEED_SHIFT);
--	cmd &= ~CMD_TX_EN;
--	cmd &= ~CMD_RX_EN;
--	cmd |= CMD_SPEED_1000 << CMD_SPEED_SHIFT;
--	enet_umac_write(enet, UMAC_CMD, cmd);
--
--	enet_maskset(enet, ENET_GMAC_STATUS,
--		     ENET_GMAC_STATUS_ETH_SPEED_MASK |
--		     ENET_GMAC_STATUS_HD |
--		     ENET_GMAC_STATUS_AUTO_CFG_EN |
--		     ENET_GMAC_STATUS_LINK_UP,
--		     ENET_GMAC_STATUS_ETH_SPEED_1000 |
--		     ENET_GMAC_STATUS_AUTO_CFG_EN |
--		     ENET_GMAC_STATUS_LINK_UP);
--}
--
--static irqreturn_t bcm4908enet_irq_handler(int irq, void *dev_id)
--{
--	struct bcm4908enet *enet = dev_id;
--
--	bcm4908enet_intrs_off(enet);
--	bcm4908enet_intrs_ack(enet);
--
--	napi_schedule(&enet->napi);
--
--	return IRQ_HANDLED;
--}
--
--static int bcm4908enet_open(struct net_device *netdev)
--{
--	struct bcm4908enet *enet = netdev_priv(netdev);
--	struct device *dev = enet->dev;
--	int err;
--
--	err = request_irq(netdev->irq, bcm4908enet_irq_handler, 0, "enet", enet);
--	if (err) {
--		dev_err(dev, "Failed to request IRQ %d: %d\n", netdev->irq, err);
--		return err;
--	}
--
--	bcm4908enet_gmac_init(enet);
--	bcm4908enet_dma_reset(enet);
--	bcm4908enet_dma_init(enet);
--
--	enet_umac_set(enet, UMAC_CMD, CMD_TX_EN | CMD_RX_EN);
--
--	enet_set(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN);
--	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_FLOWC_CH1_EN, 0);
--	bcm4908enet_dma_rx_ring_enable(enet, &enet->rx_ring);
--
--	napi_enable(&enet->napi);
--	netif_carrier_on(netdev);
--	netif_start_queue(netdev);
--
--	bcm4908enet_intrs_ack(enet);
--	bcm4908enet_intrs_on(enet);
--
--	return 0;
--}
--
--static int bcm4908enet_stop(struct net_device *netdev)
--{
--	struct bcm4908enet *enet = netdev_priv(netdev);
--
--	netif_stop_queue(netdev);
--	netif_carrier_off(netdev);
--	napi_disable(&enet->napi);
--
--	bcm4908enet_dma_rx_ring_disable(enet, &enet->rx_ring);
--	bcm4908enet_dma_tx_ring_disable(enet, &enet->tx_ring);
--
--	bcm4908enet_dma_uninit(enet);
--
--	free_irq(enet->netdev->irq, enet);
--
--	return 0;
--}
--
--static int bcm4908enet_start_xmit(struct sk_buff *skb, struct net_device *netdev)
--{
--	struct bcm4908enet *enet = netdev_priv(netdev);
--	struct bcm4908enet_dma_ring *ring = &enet->tx_ring;
--	struct bcm4908enet_dma_ring_slot *slot;
--	struct device *dev = enet->dev;
--	struct bcm4908enet_dma_ring_bd *buf_desc;
--	int free_buf_descs;
--	u32 tmp;
--
--	/* Free transmitted skbs */
--	while (ring->read_idx != ring->write_idx) {
--		buf_desc = &ring->buf_desc[ring->read_idx];
--		if (buf_desc->ctl & DMA_CTL_STATUS_OWN)
--			break;
--		slot = &ring->slots[ring->read_idx];
--
--		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
--		dev_kfree_skb(slot->skb);
--		if (++ring->read_idx == ring->length)
--			ring->read_idx = 0;
--	}
--
--	/* Don't use the last empty buf descriptor */
--	if (ring->read_idx <= ring->write_idx)
--		free_buf_descs = ring->read_idx - ring->write_idx + ring->length;
--	else
--		free_buf_descs = ring->read_idx - ring->write_idx;
--	if (free_buf_descs < 2)
--		return NETDEV_TX_BUSY;
--
--	/* Hardware removes OWN bit after sending data */
--	buf_desc = &ring->buf_desc[ring->write_idx];
--	if (unlikely(le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)) {
--		netif_stop_queue(netdev);
--		return NETDEV_TX_BUSY;
--	}
--
--	slot = &ring->slots[ring->write_idx];
--	slot->skb = skb;
--	slot->len = skb->len;
--	slot->dma_addr = dma_map_single(dev, skb->data, skb->len, DMA_TO_DEVICE);
--	if (unlikely(dma_mapping_error(dev, slot->dma_addr)))
--		return NETDEV_TX_BUSY;
--
--	tmp = skb->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
--	tmp |= DMA_CTL_STATUS_OWN;
--	tmp |= DMA_CTL_STATUS_SOP;
--	tmp |= DMA_CTL_STATUS_EOP;
--	tmp |= DMA_CTL_STATUS_APPEND_CRC;
--	if (ring->write_idx + 1 == ring->length - 1)
--		tmp |= DMA_CTL_STATUS_WRAP;
--
--	buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr);
--	buf_desc->ctl = cpu_to_le32(tmp);
--
--	bcm4908enet_dma_tx_ring_ensable(enet, &enet->tx_ring);
--
--	if (++ring->write_idx == ring->length - 1)
--		ring->write_idx = 0;
--	enet->netdev->stats.tx_bytes += skb->len;
--	enet->netdev->stats.tx_packets++;
--
--	return NETDEV_TX_OK;
--}
--
--static int bcm4908enet_poll(struct napi_struct *napi, int weight)
--{
--	struct bcm4908enet *enet = container_of(napi, struct bcm4908enet, napi);
--	struct device *dev = enet->dev;
--	int handled = 0;
--
--	while (handled < weight) {
--		struct bcm4908enet_dma_ring_bd *buf_desc;
--		struct bcm4908enet_dma_ring_slot slot;
--		u32 ctl;
--		int len;
--		int err;
--
--		buf_desc = &enet->rx_ring.buf_desc[enet->rx_ring.read_idx];
--		ctl = le32_to_cpu(buf_desc->ctl);
--		if (ctl & DMA_CTL_STATUS_OWN)
--			break;
--
--		slot = enet->rx_ring.slots[enet->rx_ring.read_idx];
--
--		/* Provide new buffer before unpinning the old one */
--		err = bcm4908enet_dma_alloc_rx_buf(enet, enet->rx_ring.read_idx);
--		if (err)
--			break;
--
--		if (++enet->rx_ring.read_idx == enet->rx_ring.length)
--			enet->rx_ring.read_idx = 0;
--
--		len = (ctl & DMA_CTL_LEN_DESC_BUFLENGTH) >> DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
--
--		if (len < ENET_MTU_MIN ||
--		    (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
--			enet->netdev->stats.rx_dropped++;
--			break;
--		}
--
--		dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE);
--
--		skb_put(slot.skb, len - 4 + 2);
--		slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev);
--		netif_receive_skb(slot.skb);
--
--		enet->netdev->stats.rx_packets++;
--		enet->netdev->stats.rx_bytes += len;
--	}
--
--	if (handled < weight) {
--		napi_complete_done(napi, handled);
--		bcm4908enet_intrs_on(enet);
--	}
--
--	return handled;
--}
--
--static const struct net_device_ops bcm96xx_netdev_ops = {
--	.ndo_open = bcm4908enet_open,
--	.ndo_stop = bcm4908enet_stop,
--	.ndo_start_xmit = bcm4908enet_start_xmit,
--	.ndo_set_mac_address = eth_mac_addr,
--};
--
--static int bcm4908enet_probe(struct platform_device *pdev)
--{
--	struct device *dev = &pdev->dev;
--	struct net_device *netdev;
--	struct bcm4908enet *enet;
--	int err;
--
--	netdev = devm_alloc_etherdev(dev, sizeof(*enet));
--	if (!netdev)
--		return -ENOMEM;
--
--	enet = netdev_priv(netdev);
--	enet->dev = dev;
--	enet->netdev = netdev;
--
--	enet->base = devm_platform_ioremap_resource(pdev, 0);
--	if (IS_ERR(enet->base)) {
--		dev_err(dev, "Failed to map registers: %ld\n", PTR_ERR(enet->base));
--		return PTR_ERR(enet->base);
--	}
--
--	netdev->irq = platform_get_irq_byname(pdev, "rx");
--	if (netdev->irq < 0)
--		return netdev->irq;
--
--	dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
--
--	err = bcm4908enet_dma_alloc(enet);
--	if (err)
--		return err;
--
--	SET_NETDEV_DEV(netdev, &pdev->dev);
--	eth_hw_addr_random(netdev);
--	netdev->netdev_ops = &bcm96xx_netdev_ops;
--	netdev->min_mtu = ETH_ZLEN;
--	netdev->mtu = ENET_MTU_MAX;
--	netdev->max_mtu = ENET_MTU_MAX;
--	netif_napi_add(netdev, &enet->napi, bcm4908enet_poll, 64);
--
--	err = register_netdev(netdev);
--	if (err) {
--		bcm4908enet_dma_free(enet);
--		return err;
--	}
--
--	platform_set_drvdata(pdev, enet);
--
--	return 0;
--}
--
--static int bcm4908enet_remove(struct platform_device *pdev)
--{
--	struct bcm4908enet *enet = platform_get_drvdata(pdev);
--
--	unregister_netdev(enet->netdev);
--	netif_napi_del(&enet->napi);
--	bcm4908enet_dma_free(enet);
--
--	return 0;
--}
--
--static const struct of_device_id bcm4908enet_of_match[] = {
--	{ .compatible = "brcm,bcm4908enet"},
--	{},
--};
--
--static struct platform_driver bcm4908enet_driver = {
--	.driver = {
--		.name = "bcm4908enet",
--		.of_match_table = bcm4908enet_of_match,
--	},
--	.probe	= bcm4908enet_probe,
--	.remove = bcm4908enet_remove,
--};
--module_platform_driver(bcm4908enet_driver);
--
--MODULE_LICENSE("GPL v2");
--MODULE_DEVICE_TABLE(of, bcm4908enet_of_match);
---- /dev/null
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -0,0 +1,677 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/etherdevice.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+
-+#include "bcm4908_enet.h"
-+#include "unimac.h"
-+
-+#define ENET_DMA_CH_RX_CFG			ENET_DMA_CH0_CFG
-+#define ENET_DMA_CH_TX_CFG			ENET_DMA_CH1_CFG
-+#define ENET_DMA_CH_RX_STATE_RAM		ENET_DMA_CH0_STATE_RAM
-+#define ENET_DMA_CH_TX_STATE_RAM		ENET_DMA_CH1_STATE_RAM
-+
-+#define ENET_TX_BDS_NUM				200
-+#define ENET_RX_BDS_NUM				200
-+#define ENET_RX_BDS_NUM_MAX			8192
-+
-+#define ENET_DMA_INT_DEFAULTS			(ENET_DMA_CH_CFG_INT_DONE | \
-+						 ENET_DMA_CH_CFG_INT_NO_DESC | \
-+						 ENET_DMA_CH_CFG_INT_BUFF_DONE)
-+#define ENET_DMA_MAX_BURST_LEN			8 /* in 64 bit words */
-+
-+#define ENET_MTU_MIN				60
-+#define ENET_MTU_MAX				1500 /* Is it possible to support 2044? */
-+#define ENET_MTU_MAX_EXTRA_SIZE			32 /* L2 */
-+
-+struct bcm4908_enet_dma_ring_bd {
-+	__le32 ctl;
-+	__le32 addr;
-+} __packed;
-+
-+struct bcm4908_enet_dma_ring_slot {
-+	struct sk_buff *skb;
-+	unsigned int len;
-+	dma_addr_t dma_addr;
-+};
-+
-+struct bcm4908_enet_dma_ring {
-+	int is_tx;
-+	int read_idx;
-+	int write_idx;
-+	int length;
-+	u16 cfg_block;
-+	u16 st_ram_block;
-+
-+	union {
-+		void *cpu_addr;
-+		struct bcm4908_enet_dma_ring_bd *buf_desc;
-+	};
-+	dma_addr_t dma_addr;
-+
-+	struct bcm4908_enet_dma_ring_slot *slots;
-+};
-+
-+struct bcm4908_enet {
-+	struct device *dev;
-+	struct net_device *netdev;
-+	struct napi_struct napi;
-+	void __iomem *base;
-+
-+	struct bcm4908_enet_dma_ring tx_ring;
-+	struct bcm4908_enet_dma_ring rx_ring;
-+};
-+
-+/***
-+ * R/W ops
-+ */
-+
-+static inline u32 enet_read(struct bcm4908_enet *enet, u16 offset)
-+{
-+	return readl(enet->base + offset);
-+}
-+
-+static inline void enet_write(struct bcm4908_enet *enet, u16 offset, u32 value)
-+{
-+	writel(value, enet->base + offset);
-+}
-+
-+static inline void enet_maskset(struct bcm4908_enet *enet, u16 offset, u32 mask, u32 set)
-+{
-+	u32 val;
-+
-+	WARN_ON(set & ~mask);
-+
-+	val = enet_read(enet, offset);
-+	val = (val & ~mask) | (set & mask);
-+	enet_write(enet, offset, val);
-+}
-+
-+static inline void enet_set(struct bcm4908_enet *enet, u16 offset, u32 set)
-+{
-+	enet_maskset(enet, offset, set, set);
-+}
-+
-+static inline u32 enet_umac_read(struct bcm4908_enet *enet, u16 offset)
-+{
-+	return enet_read(enet, ENET_UNIMAC + offset);
-+}
-+
-+static inline void enet_umac_write(struct bcm4908_enet *enet, u16 offset, u32 value)
-+{
-+	enet_write(enet, ENET_UNIMAC + offset, value);
-+}
-+
-+static inline void enet_umac_maskset(struct bcm4908_enet *enet, u16 offset, u32 mask, u32 set)
-+{
-+	enet_maskset(enet, ENET_UNIMAC + offset, mask, set);
-+}
-+
-+static inline void enet_umac_set(struct bcm4908_enet *enet, u16 offset, u32 set)
-+{
-+	enet_set(enet, ENET_UNIMAC + offset, set);
-+}
-+
-+/***
-+ * Helpers
-+ */
-+
-+static void bcm4908_enet_intrs_on(struct bcm4908_enet *enet)
-+{
-+	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, ENET_DMA_INT_DEFAULTS);
-+}
-+
-+static void bcm4908_enet_intrs_off(struct bcm4908_enet *enet)
-+{
-+	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, 0);
-+}
-+
-+static void bcm4908_enet_intrs_ack(struct bcm4908_enet *enet)
-+{
-+	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
-+}
-+
-+/***
-+ * DMA
-+ */
-+
-+static int bcm4908_dma_alloc_buf_descs(struct bcm4908_enet *enet,
-+				       struct bcm4908_enet_dma_ring *ring)
-+{
-+	int size = ring->length * sizeof(struct bcm4908_enet_dma_ring_bd);
-+	struct device *dev = enet->dev;
-+
-+	ring->cpu_addr = dma_alloc_coherent(dev, size, &ring->dma_addr, GFP_KERNEL);
-+	if (!ring->cpu_addr)
-+		return -ENOMEM;
-+
-+	if (((uintptr_t)ring->cpu_addr) & (0x40 - 1)) {
-+		dev_err(dev, "Invalid DMA ring alignment\n");
-+		goto err_free_buf_descs;
-+	}
-+
-+	ring->slots = kzalloc(ring->length * sizeof(*ring->slots), GFP_KERNEL);
-+	if (!ring->slots)
-+		goto err_free_buf_descs;
-+
-+	memset(ring->cpu_addr, 0, size);
-+
-+	ring->read_idx = 0;
-+	ring->write_idx = 0;
-+
-+	return 0;
-+
-+err_free_buf_descs:
-+	dma_free_coherent(dev, size, ring->cpu_addr, ring->dma_addr);
-+	return -ENOMEM;
-+}
-+
-+static void bcm4908_enet_dma_free(struct bcm4908_enet *enet)
-+{
-+	struct bcm4908_enet_dma_ring *tx_ring = &enet->tx_ring;
-+	struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct device *dev = enet->dev;
-+	int size;
-+
-+	size = rx_ring->length * sizeof(struct bcm4908_enet_dma_ring_bd);
-+	if (rx_ring->cpu_addr)
-+		dma_free_coherent(dev, size, rx_ring->cpu_addr, rx_ring->dma_addr);
-+	kfree(rx_ring->slots);
-+
-+	size = tx_ring->length * sizeof(struct bcm4908_enet_dma_ring_bd);
-+	if (tx_ring->cpu_addr)
-+		dma_free_coherent(dev, size, tx_ring->cpu_addr, tx_ring->dma_addr);
-+	kfree(tx_ring->slots);
-+}
-+
-+static int bcm4908_enet_dma_alloc(struct bcm4908_enet *enet)
-+{
-+	struct bcm4908_enet_dma_ring *tx_ring = &enet->tx_ring;
-+	struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct device *dev = enet->dev;
-+	int err;
-+
-+	tx_ring->length = ENET_TX_BDS_NUM;
-+	tx_ring->is_tx = 1;
-+	tx_ring->cfg_block = ENET_DMA_CH_TX_CFG;
-+	tx_ring->st_ram_block = ENET_DMA_CH_TX_STATE_RAM;
-+	err = bcm4908_dma_alloc_buf_descs(enet, tx_ring);
-+	if (err) {
-+		dev_err(dev, "Failed to alloc TX buf descriptors: %d\n", err);
-+		return err;
-+	}
-+
-+	rx_ring->length = ENET_RX_BDS_NUM;
-+	rx_ring->is_tx = 0;
-+	rx_ring->cfg_block = ENET_DMA_CH_RX_CFG;
-+	rx_ring->st_ram_block = ENET_DMA_CH_RX_STATE_RAM;
-+	err = bcm4908_dma_alloc_buf_descs(enet, rx_ring);
-+	if (err) {
-+		dev_err(dev, "Failed to alloc RX buf descriptors: %d\n", err);
-+		bcm4908_enet_dma_free(enet);
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+
-+static void bcm4908_enet_dma_reset(struct bcm4908_enet *enet)
-+{
-+	struct bcm4908_enet_dma_ring *rings[] = { &enet->rx_ring, &enet->tx_ring };
-+	int i;
-+
-+	/* Disable the DMA controller and channel */
-+	for (i = 0; i < ARRAY_SIZE(rings); i++)
-+		enet_write(enet, rings[i]->cfg_block + ENET_DMA_CH_CFG, 0);
-+	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN, 0);
-+
-+	/* Reset channels state */
-+	for (i = 0; i < ARRAY_SIZE(rings); i++) {
-+		struct bcm4908_enet_dma_ring *ring = rings[i];
-+
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR, 0);
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_STATE_DATA, 0);
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS, 0);
-+		enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR, 0);
-+	}
-+}
-+
-+static int bcm4908_enet_dma_alloc_rx_buf(struct bcm4908_enet *enet, unsigned int idx)
-+{
-+	struct bcm4908_enet_dma_ring_bd *buf_desc = &enet->rx_ring.buf_desc[idx];
-+	struct bcm4908_enet_dma_ring_slot *slot = &enet->rx_ring.slots[idx];
-+	struct device *dev = enet->dev;
-+	u32 tmp;
-+	int err;
-+
-+	slot->len = ENET_MTU_MAX + ENET_MTU_MAX_EXTRA_SIZE;
-+
-+	slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
-+	if (!slot->skb)
-+		return -ENOMEM;
-+
-+	slot->dma_addr = dma_map_single(dev, slot->skb->data, slot->len, DMA_FROM_DEVICE);
-+	err = dma_mapping_error(dev, slot->dma_addr);
-+	if (err) {
-+		dev_err(dev, "Failed to map DMA buffer: %d\n", err);
-+		kfree_skb(slot->skb);
-+		slot->skb = NULL;
-+		return err;
-+	}
-+
-+	tmp = slot->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+	tmp |= DMA_CTL_STATUS_OWN;
-+	if (idx == enet->rx_ring.length - 1)
-+		tmp |= DMA_CTL_STATUS_WRAP;
-+	buf_desc->ctl = cpu_to_le32(tmp);
-+	buf_desc->addr = cpu_to_le32(slot->dma_addr);
-+
-+	return 0;
-+}
-+
-+static void bcm4908_enet_dma_ring_init(struct bcm4908_enet *enet,
-+				       struct bcm4908_enet_dma_ring *ring)
-+{
-+	int reset_channel = 0; /* We support only 1 main channel (with TX and RX) */
-+	int reset_subch = ring->is_tx ? 1 : 0;
-+
-+	/* Reset the DMA channel */
-+	enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, BIT(reset_channel * 2 + reset_subch));
-+	enet_write(enet, ENET_DMA_CTRL_CHANNEL_RESET, 0);
-+
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_MAX_BURST, ENET_DMA_MAX_BURST_LEN);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_MASK, 0);
-+
-+	enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR,
-+		   (uint32_t)ring->dma_addr);
-+}
-+
-+static void bcm4908_enet_dma_uninit(struct bcm4908_enet *enet)
-+{
-+	struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct bcm4908_enet_dma_ring_slot *slot;
-+	struct device *dev = enet->dev;
-+	int i;
-+
-+	for (i = rx_ring->length - 1; i >= 0; i--) {
-+		slot = &rx_ring->slots[i];
-+		if (!slot->skb)
-+			continue;
-+		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_FROM_DEVICE);
-+		kfree_skb(slot->skb);
-+		slot->skb = NULL;
-+	}
-+}
-+
-+static int bcm4908_enet_dma_init(struct bcm4908_enet *enet)
-+{
-+	struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
-+	struct device *dev = enet->dev;
-+	int err;
-+	int i;
-+
-+	for (i = 0; i < rx_ring->length; i++) {
-+		err = bcm4908_enet_dma_alloc_rx_buf(enet, i);
-+		if (err) {
-+			dev_err(dev, "Failed to alloc RX buffer: %d\n", err);
-+			bcm4908_enet_dma_uninit(enet);
-+			return err;
-+		}
-+	}
-+
-+	bcm4908_enet_dma_ring_init(enet, &enet->tx_ring);
-+	bcm4908_enet_dma_ring_init(enet, &enet->rx_ring);
-+
-+	return 0;
-+}
-+
-+static void bcm4908_enet_dma_tx_ring_ensable(struct bcm4908_enet *enet,
-+					     struct bcm4908_enet_dma_ring *ring)
-+{
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
-+}
-+
-+static void bcm4908_enet_dma_tx_ring_disable(struct bcm4908_enet *enet,
-+					     struct bcm4908_enet_dma_ring *ring)
-+{
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, 0);
-+}
-+
-+static void bcm4908_enet_dma_rx_ring_enable(struct bcm4908_enet *enet,
-+					    struct bcm4908_enet_dma_ring *ring)
-+{
-+	enet_set(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
-+}
-+
-+static void bcm4908_enet_dma_rx_ring_disable(struct bcm4908_enet *enet,
-+					     struct bcm4908_enet_dma_ring *ring)
-+{
-+	unsigned long deadline;
-+	u32 tmp;
-+
-+	enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
-+
-+	deadline = jiffies + usecs_to_jiffies(2000);
-+	do {
-+		tmp = enet_read(enet, ring->cfg_block + ENET_DMA_CH_CFG);
-+		if (!(tmp & ENET_DMA_CH_CFG_ENABLE))
-+			return;
-+		enet_maskset(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE, 0);
-+		usleep_range(10, 30);
-+	} while (!time_after_eq(jiffies, deadline));
-+
-+	dev_warn(enet->dev, "Timeout waiting for DMA TX stop\n");
-+}
-+
-+/***
-+ * Ethernet driver
-+ */
-+
-+static void bcm4908_enet_gmac_init(struct bcm4908_enet *enet)
-+{
-+	u32 cmd;
-+
-+	cmd = enet_umac_read(enet, UMAC_CMD);
-+	enet_umac_write(enet, UMAC_CMD, cmd | CMD_SW_RESET);
-+	enet_umac_write(enet, UMAC_CMD, cmd & ~CMD_SW_RESET);
-+
-+	enet_set(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH);
-+	enet_maskset(enet, ENET_FLUSH, ENET_FLUSH_RXFIFO_FLUSH | ENET_FLUSH_TXFIFO_FLUSH, 0);
-+
-+	enet_set(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB);
-+	enet_maskset(enet, ENET_MIB_CTRL, ENET_MIB_CTRL_CLR_MIB, 0);
-+
-+	cmd = enet_umac_read(enet, UMAC_CMD);
-+	cmd &= ~(CMD_SPEED_MASK << CMD_SPEED_SHIFT);
-+	cmd &= ~CMD_TX_EN;
-+	cmd &= ~CMD_RX_EN;
-+	cmd |= CMD_SPEED_1000 << CMD_SPEED_SHIFT;
-+	enet_umac_write(enet, UMAC_CMD, cmd);
-+
-+	enet_maskset(enet, ENET_GMAC_STATUS,
-+		     ENET_GMAC_STATUS_ETH_SPEED_MASK |
-+		     ENET_GMAC_STATUS_HD |
-+		     ENET_GMAC_STATUS_AUTO_CFG_EN |
-+		     ENET_GMAC_STATUS_LINK_UP,
-+		     ENET_GMAC_STATUS_ETH_SPEED_1000 |
-+		     ENET_GMAC_STATUS_AUTO_CFG_EN |
-+		     ENET_GMAC_STATUS_LINK_UP);
-+}
-+
-+static irqreturn_t bcm4908_enet_irq_handler(int irq, void *dev_id)
-+{
-+	struct bcm4908_enet *enet = dev_id;
-+
-+	bcm4908_enet_intrs_off(enet);
-+	bcm4908_enet_intrs_ack(enet);
-+
-+	napi_schedule(&enet->napi);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int bcm4908_enet_open(struct net_device *netdev)
-+{
-+	struct bcm4908_enet *enet = netdev_priv(netdev);
-+	struct device *dev = enet->dev;
-+	int err;
-+
-+	err = request_irq(netdev->irq, bcm4908_enet_irq_handler, 0, "enet", enet);
-+	if (err) {
-+		dev_err(dev, "Failed to request IRQ %d: %d\n", netdev->irq, err);
-+		return err;
-+	}
-+
-+	bcm4908_enet_gmac_init(enet);
-+	bcm4908_enet_dma_reset(enet);
-+	bcm4908_enet_dma_init(enet);
-+
-+	enet_umac_set(enet, UMAC_CMD, CMD_TX_EN | CMD_RX_EN);
-+
-+	enet_set(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN);
-+	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_FLOWC_CH1_EN, 0);
-+	bcm4908_enet_dma_rx_ring_enable(enet, &enet->rx_ring);
-+
-+	napi_enable(&enet->napi);
-+	netif_carrier_on(netdev);
-+	netif_start_queue(netdev);
-+
-+	bcm4908_enet_intrs_ack(enet);
-+	bcm4908_enet_intrs_on(enet);
-+
-+	return 0;
-+}
-+
-+static int bcm4908_enet_stop(struct net_device *netdev)
-+{
-+	struct bcm4908_enet *enet = netdev_priv(netdev);
-+
-+	netif_stop_queue(netdev);
-+	netif_carrier_off(netdev);
-+	napi_disable(&enet->napi);
-+
-+	bcm4908_enet_dma_rx_ring_disable(enet, &enet->rx_ring);
-+	bcm4908_enet_dma_tx_ring_disable(enet, &enet->tx_ring);
-+
-+	bcm4908_enet_dma_uninit(enet);
-+
-+	free_irq(enet->netdev->irq, enet);
-+
-+	return 0;
-+}
-+
-+static int bcm4908_enet_start_xmit(struct sk_buff *skb, struct net_device *netdev)
-+{
-+	struct bcm4908_enet *enet = netdev_priv(netdev);
-+	struct bcm4908_enet_dma_ring *ring = &enet->tx_ring;
-+	struct bcm4908_enet_dma_ring_slot *slot;
-+	struct device *dev = enet->dev;
-+	struct bcm4908_enet_dma_ring_bd *buf_desc;
-+	int free_buf_descs;
-+	u32 tmp;
-+
-+	/* Free transmitted skbs */
-+	while (ring->read_idx != ring->write_idx) {
-+		buf_desc = &ring->buf_desc[ring->read_idx];
-+		if (buf_desc->ctl & DMA_CTL_STATUS_OWN)
-+			break;
-+		slot = &ring->slots[ring->read_idx];
-+
-+		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
-+		dev_kfree_skb(slot->skb);
-+		if (++ring->read_idx == ring->length)
-+			ring->read_idx = 0;
-+	}
-+
-+	/* Don't use the last empty buf descriptor */
-+	if (ring->read_idx <= ring->write_idx)
-+		free_buf_descs = ring->read_idx - ring->write_idx + ring->length;
-+	else
-+		free_buf_descs = ring->read_idx - ring->write_idx;
-+	if (free_buf_descs < 2)
-+		return NETDEV_TX_BUSY;
-+
-+	/* Hardware removes OWN bit after sending data */
-+	buf_desc = &ring->buf_desc[ring->write_idx];
-+	if (unlikely(le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)) {
-+		netif_stop_queue(netdev);
-+		return NETDEV_TX_BUSY;
-+	}
-+
-+	slot = &ring->slots[ring->write_idx];
-+	slot->skb = skb;
-+	slot->len = skb->len;
-+	slot->dma_addr = dma_map_single(dev, skb->data, skb->len, DMA_TO_DEVICE);
-+	if (unlikely(dma_mapping_error(dev, slot->dma_addr)))
-+		return NETDEV_TX_BUSY;
-+
-+	tmp = skb->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+	tmp |= DMA_CTL_STATUS_OWN;
-+	tmp |= DMA_CTL_STATUS_SOP;
-+	tmp |= DMA_CTL_STATUS_EOP;
-+	tmp |= DMA_CTL_STATUS_APPEND_CRC;
-+	if (ring->write_idx + 1 == ring->length - 1)
-+		tmp |= DMA_CTL_STATUS_WRAP;
-+
-+	buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr);
-+	buf_desc->ctl = cpu_to_le32(tmp);
-+
-+	bcm4908_enet_dma_tx_ring_ensable(enet, &enet->tx_ring);
-+
-+	if (++ring->write_idx == ring->length - 1)
-+		ring->write_idx = 0;
-+	enet->netdev->stats.tx_bytes += skb->len;
-+	enet->netdev->stats.tx_packets++;
-+
-+	return NETDEV_TX_OK;
-+}
-+
-+static int bcm4908_enet_poll(struct napi_struct *napi, int weight)
-+{
-+	struct bcm4908_enet *enet = container_of(napi, struct bcm4908_enet, napi);
-+	struct device *dev = enet->dev;
-+	int handled = 0;
-+
-+	while (handled < weight) {
-+		struct bcm4908_enet_dma_ring_bd *buf_desc;
-+		struct bcm4908_enet_dma_ring_slot slot;
-+		u32 ctl;
-+		int len;
-+		int err;
-+
-+		buf_desc = &enet->rx_ring.buf_desc[enet->rx_ring.read_idx];
-+		ctl = le32_to_cpu(buf_desc->ctl);
-+		if (ctl & DMA_CTL_STATUS_OWN)
-+			break;
-+
-+		slot = enet->rx_ring.slots[enet->rx_ring.read_idx];
-+
-+		/* Provide new buffer before unpinning the old one */
-+		err = bcm4908_enet_dma_alloc_rx_buf(enet, enet->rx_ring.read_idx);
-+		if (err)
-+			break;
-+
-+		if (++enet->rx_ring.read_idx == enet->rx_ring.length)
-+			enet->rx_ring.read_idx = 0;
-+
-+		len = (ctl & DMA_CTL_LEN_DESC_BUFLENGTH) >> DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+
-+		if (len < ENET_MTU_MIN ||
-+		    (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
-+			enet->netdev->stats.rx_dropped++;
-+			break;
-+		}
-+
-+		dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE);
-+
-+		skb_put(slot.skb, len - 4 + 2);
-+		slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev);
-+		netif_receive_skb(slot.skb);
-+
-+		enet->netdev->stats.rx_packets++;
-+		enet->netdev->stats.rx_bytes += len;
-+	}
-+
-+	if (handled < weight) {
-+		napi_complete_done(napi, handled);
-+		bcm4908_enet_intrs_on(enet);
-+	}
-+
-+	return handled;
-+}
-+
-+static const struct net_device_ops bcm96xx_netdev_ops = {
-+	.ndo_open = bcm4908_enet_open,
-+	.ndo_stop = bcm4908_enet_stop,
-+	.ndo_start_xmit = bcm4908_enet_start_xmit,
-+	.ndo_set_mac_address = eth_mac_addr,
-+};
-+
-+static int bcm4908_enet_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct net_device *netdev;
-+	struct bcm4908_enet *enet;
-+	int err;
-+
-+	netdev = devm_alloc_etherdev(dev, sizeof(*enet));
-+	if (!netdev)
-+		return -ENOMEM;
-+
-+	enet = netdev_priv(netdev);
-+	enet->dev = dev;
-+	enet->netdev = netdev;
-+
-+	enet->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(enet->base)) {
-+		dev_err(dev, "Failed to map registers: %ld\n", PTR_ERR(enet->base));
-+		return PTR_ERR(enet->base);
-+	}
-+
-+	netdev->irq = platform_get_irq_byname(pdev, "rx");
-+	if (netdev->irq < 0)
-+		return netdev->irq;
-+
-+	dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
-+
-+	err = bcm4908_enet_dma_alloc(enet);
-+	if (err)
-+		return err;
-+
-+	SET_NETDEV_DEV(netdev, &pdev->dev);
-+	eth_hw_addr_random(netdev);
-+	netdev->netdev_ops = &bcm96xx_netdev_ops;
-+	netdev->min_mtu = ETH_ZLEN;
-+	netdev->mtu = ENET_MTU_MAX;
-+	netdev->max_mtu = ENET_MTU_MAX;
-+	netif_napi_add(netdev, &enet->napi, bcm4908_enet_poll, 64);
-+
-+	err = register_netdev(netdev);
-+	if (err) {
-+		bcm4908_enet_dma_free(enet);
-+		return err;
-+	}
-+
-+	platform_set_drvdata(pdev, enet);
-+
-+	return 0;
-+}
-+
-+static int bcm4908_enet_remove(struct platform_device *pdev)
-+{
-+	struct bcm4908_enet *enet = platform_get_drvdata(pdev);
-+
-+	unregister_netdev(enet->netdev);
-+	netif_napi_del(&enet->napi);
-+	bcm4908_enet_dma_free(enet);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm4908_enet_of_match[] = {
-+	{ .compatible = "brcm,bcm4908-enet"},
-+	{},
-+};
-+
-+static struct platform_driver bcm4908_enet_driver = {
-+	.driver = {
-+		.name = "bcm4908_enet",
-+		.of_match_table = bcm4908_enet_of_match,
-+	},
-+	.probe	= bcm4908_enet_probe,
-+	.remove = bcm4908_enet_remove,
-+};
-+module_platform_driver(bcm4908_enet_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DEVICE_TABLE(of, bcm4908_enet_of_match);
---- a/drivers/net/ethernet/broadcom/bcm4908enet.h
-+++ /dev/null
-@@ -1,96 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0-only */
--#ifndef __BCM4908ENET_H
--#define __BCM4908ENET_H
--
--#define ENET_CONTROL					0x000
--#define ENET_MIB_CTRL					0x004
--#define  ENET_MIB_CTRL_CLR_MIB				0x00000001
--#define ENET_RX_ERR_MASK				0x008
--#define ENET_MIB_MAX_PKT_SIZE				0x00C
--#define  ENET_MIB_MAX_PKT_SIZE_VAL			0x00003fff
--#define ENET_DIAG_OUT					0x01c
--#define ENET_ENABLE_DROP_PKT				0x020
--#define ENET_IRQ_ENABLE					0x024
--#define  ENET_IRQ_ENABLE_OVFL				0x00000001
--#define ENET_GMAC_STATUS				0x028
--#define  ENET_GMAC_STATUS_ETH_SPEED_MASK		0x00000003
--#define  ENET_GMAC_STATUS_ETH_SPEED_10			0x00000000
--#define  ENET_GMAC_STATUS_ETH_SPEED_100			0x00000001
--#define  ENET_GMAC_STATUS_ETH_SPEED_1000		0x00000002
--#define  ENET_GMAC_STATUS_HD				0x00000004
--#define  ENET_GMAC_STATUS_AUTO_CFG_EN			0x00000008
--#define  ENET_GMAC_STATUS_LINK_UP			0x00000010
--#define ENET_IRQ_STATUS					0x02c
--#define  ENET_IRQ_STATUS_OVFL				0x00000001
--#define ENET_OVERFLOW_COUNTER				0x030
--#define ENET_FLUSH					0x034
--#define  ENET_FLUSH_RXFIFO_FLUSH			0x00000001
--#define  ENET_FLUSH_TXFIFO_FLUSH			0x00000002
--#define ENET_RSV_SELECT					0x038
--#define ENET_BP_FORCE					0x03c
--#define  ENET_BP_FORCE_FORCE				0x00000001
--#define ENET_DMA_RX_OK_TO_SEND_COUNT			0x040
--#define  ENET_DMA_RX_OK_TO_SEND_COUNT_VAL		0x0000000f
--#define ENET_TX_CRC_CTRL				0x044
--#define ENET_MIB					0x200
--#define ENET_UNIMAC					0x400
--#define ENET_DMA					0x800
--#define ENET_DMA_CONTROLLER_CFG				0x800
--#define  ENET_DMA_CTRL_CFG_MASTER_EN			0x00000001
--#define  ENET_DMA_CTRL_CFG_FLOWC_CH1_EN			0x00000002
--#define  ENET_DMA_CTRL_CFG_FLOWC_CH3_EN			0x00000004
--#define ENET_DMA_FLOWCTL_CH1_THRESH_LO			0x804
--#define ENET_DMA_FLOWCTL_CH1_THRESH_HI			0x808
--#define ENET_DMA_FLOWCTL_CH1_ALLOC			0x80c
--#define  ENET_DMA_FLOWCTL_CH1_ALLOC_FORCE		0x80000000
--#define ENET_DMA_FLOWCTL_CH3_THRESH_LO			0x810
--#define ENET_DMA_FLOWCTL_CH3_THRESH_HI			0x814
--#define ENET_DMA_FLOWCTL_CH3_ALLOC			0x818
--#define ENET_DMA_FLOWCTL_CH5_THRESH_LO			0x81C
--#define ENET_DMA_FLOWCTL_CH5_THRESH_HI			0x820
--#define ENET_DMA_FLOWCTL_CH5_ALLOC			0x824
--#define ENET_DMA_FLOWCTL_CH7_THRESH_LO			0x828
--#define ENET_DMA_FLOWCTL_CH7_THRESH_HI			0x82C
--#define ENET_DMA_FLOWCTL_CH7_ALLOC			0x830
--#define ENET_DMA_CTRL_CHANNEL_RESET			0x834
--#define ENET_DMA_CTRL_CHANNEL_DEBUG			0x838
--#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_STATUS		0x840
--#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_MASK		0x844
--#define ENET_DMA_CH0_CFG				0xa00		/* RX */
--#define ENET_DMA_CH1_CFG				0xa10		/* TX */
--#define ENET_DMA_CH0_STATE_RAM				0xc00		/* RX */
--#define ENET_DMA_CH1_STATE_RAM				0xc10		/* TX */
--
--#define ENET_DMA_CH_CFG					0x00		/* assorted configuration */
--#define  ENET_DMA_CH_CFG_ENABLE				0x00000001	/* set to enable channel */
--#define  ENET_DMA_CH_CFG_PKT_HALT			0x00000002	/* idle after an EOP flag is detected */
--#define  ENET_DMA_CH_CFG_BURST_HALT			0x00000004	/* idle after finish current memory burst */
--#define ENET_DMA_CH_CFG_INT_STAT			0x04		/* interrupts control and status */
--#define ENET_DMA_CH_CFG_INT_MASK			0x08		/* interrupts mask */
--#define  ENET_DMA_CH_CFG_INT_BUFF_DONE			0x00000001	/* buffer done */
--#define  ENET_DMA_CH_CFG_INT_DONE			0x00000002	/* packet xfer complete */
--#define  ENET_DMA_CH_CFG_INT_NO_DESC			0x00000004	/* no valid descriptors */
--#define  ENET_DMA_CH_CFG_INT_RX_ERROR			0x00000008	/* rxdma detect client protocol error */
--#define ENET_DMA_CH_CFG_MAX_BURST			0x0c		/* max burst length permitted */
--#define  ENET_DMA_CH_CFG_MAX_BURST_DESCSIZE_SEL		0x00040000	/* DMA Descriptor Size Selection */
--#define ENET_DMA_CH_CFG_SIZE				0x10
--
--#define ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR		0x00		/* descriptor ring start address */
--#define ENET_DMA_CH_STATE_RAM_STATE_DATA		0x04		/* state/bytes done/ring offset */
--#define ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS		0x08		/* buffer descriptor status and len */
--#define ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR		0x0c		/* buffer descrpitor current processing */
--#define ENET_DMA_CH_STATE_RAM_SIZE			0x10
--
--#define DMA_CTL_STATUS_APPEND_CRC			0x00000100
--#define DMA_CTL_STATUS_APPEND_BRCM_TAG			0x00000200
--#define DMA_CTL_STATUS_PRIO				0x00000C00  /* Prio for Tx */
--#define DMA_CTL_STATUS_WRAP				0x00001000  /* */
--#define DMA_CTL_STATUS_SOP				0x00002000  /* first buffer in packet */
--#define DMA_CTL_STATUS_EOP				0x00004000  /* last buffer in packet */
--#define DMA_CTL_STATUS_OWN				0x00008000  /* cleared by DMA, set by SW */
--#define DMA_CTL_LEN_DESC_BUFLENGTH			0x0fff0000
--#define DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT		16
--#define DMA_CTL_LEN_DESC_MULTICAST			0x40000000
--#define DMA_CTL_LEN_DESC_USEFPM				0x80000000
--
--#endif
---- /dev/null
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.h
-@@ -0,0 +1,96 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+#ifndef __BCM4908_ENET_H
-+#define __BCM4908_ENET_H
-+
-+#define ENET_CONTROL					0x000
-+#define ENET_MIB_CTRL					0x004
-+#define  ENET_MIB_CTRL_CLR_MIB				0x00000001
-+#define ENET_RX_ERR_MASK				0x008
-+#define ENET_MIB_MAX_PKT_SIZE				0x00C
-+#define  ENET_MIB_MAX_PKT_SIZE_VAL			0x00003fff
-+#define ENET_DIAG_OUT					0x01c
-+#define ENET_ENABLE_DROP_PKT				0x020
-+#define ENET_IRQ_ENABLE					0x024
-+#define  ENET_IRQ_ENABLE_OVFL				0x00000001
-+#define ENET_GMAC_STATUS				0x028
-+#define  ENET_GMAC_STATUS_ETH_SPEED_MASK		0x00000003
-+#define  ENET_GMAC_STATUS_ETH_SPEED_10			0x00000000
-+#define  ENET_GMAC_STATUS_ETH_SPEED_100			0x00000001
-+#define  ENET_GMAC_STATUS_ETH_SPEED_1000		0x00000002
-+#define  ENET_GMAC_STATUS_HD				0x00000004
-+#define  ENET_GMAC_STATUS_AUTO_CFG_EN			0x00000008
-+#define  ENET_GMAC_STATUS_LINK_UP			0x00000010
-+#define ENET_IRQ_STATUS					0x02c
-+#define  ENET_IRQ_STATUS_OVFL				0x00000001
-+#define ENET_OVERFLOW_COUNTER				0x030
-+#define ENET_FLUSH					0x034
-+#define  ENET_FLUSH_RXFIFO_FLUSH			0x00000001
-+#define  ENET_FLUSH_TXFIFO_FLUSH			0x00000002
-+#define ENET_RSV_SELECT					0x038
-+#define ENET_BP_FORCE					0x03c
-+#define  ENET_BP_FORCE_FORCE				0x00000001
-+#define ENET_DMA_RX_OK_TO_SEND_COUNT			0x040
-+#define  ENET_DMA_RX_OK_TO_SEND_COUNT_VAL		0x0000000f
-+#define ENET_TX_CRC_CTRL				0x044
-+#define ENET_MIB					0x200
-+#define ENET_UNIMAC					0x400
-+#define ENET_DMA					0x800
-+#define ENET_DMA_CONTROLLER_CFG				0x800
-+#define  ENET_DMA_CTRL_CFG_MASTER_EN			0x00000001
-+#define  ENET_DMA_CTRL_CFG_FLOWC_CH1_EN			0x00000002
-+#define  ENET_DMA_CTRL_CFG_FLOWC_CH3_EN			0x00000004
-+#define ENET_DMA_FLOWCTL_CH1_THRESH_LO			0x804
-+#define ENET_DMA_FLOWCTL_CH1_THRESH_HI			0x808
-+#define ENET_DMA_FLOWCTL_CH1_ALLOC			0x80c
-+#define  ENET_DMA_FLOWCTL_CH1_ALLOC_FORCE		0x80000000
-+#define ENET_DMA_FLOWCTL_CH3_THRESH_LO			0x810
-+#define ENET_DMA_FLOWCTL_CH3_THRESH_HI			0x814
-+#define ENET_DMA_FLOWCTL_CH3_ALLOC			0x818
-+#define ENET_DMA_FLOWCTL_CH5_THRESH_LO			0x81C
-+#define ENET_DMA_FLOWCTL_CH5_THRESH_HI			0x820
-+#define ENET_DMA_FLOWCTL_CH5_ALLOC			0x824
-+#define ENET_DMA_FLOWCTL_CH7_THRESH_LO			0x828
-+#define ENET_DMA_FLOWCTL_CH7_THRESH_HI			0x82C
-+#define ENET_DMA_FLOWCTL_CH7_ALLOC			0x830
-+#define ENET_DMA_CTRL_CHANNEL_RESET			0x834
-+#define ENET_DMA_CTRL_CHANNEL_DEBUG			0x838
-+#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_STATUS		0x840
-+#define ENET_DMA_CTRL_GLOBAL_INTERRUPT_MASK		0x844
-+#define ENET_DMA_CH0_CFG				0xa00		/* RX */
-+#define ENET_DMA_CH1_CFG				0xa10		/* TX */
-+#define ENET_DMA_CH0_STATE_RAM				0xc00		/* RX */
-+#define ENET_DMA_CH1_STATE_RAM				0xc10		/* TX */
-+
-+#define ENET_DMA_CH_CFG					0x00		/* assorted configuration */
-+#define  ENET_DMA_CH_CFG_ENABLE				0x00000001	/* set to enable channel */
-+#define  ENET_DMA_CH_CFG_PKT_HALT			0x00000002	/* idle after an EOP flag is detected */
-+#define  ENET_DMA_CH_CFG_BURST_HALT			0x00000004	/* idle after finish current memory burst */
-+#define ENET_DMA_CH_CFG_INT_STAT			0x04		/* interrupts control and status */
-+#define ENET_DMA_CH_CFG_INT_MASK			0x08		/* interrupts mask */
-+#define  ENET_DMA_CH_CFG_INT_BUFF_DONE			0x00000001	/* buffer done */
-+#define  ENET_DMA_CH_CFG_INT_DONE			0x00000002	/* packet xfer complete */
-+#define  ENET_DMA_CH_CFG_INT_NO_DESC			0x00000004	/* no valid descriptors */
-+#define  ENET_DMA_CH_CFG_INT_RX_ERROR			0x00000008	/* rxdma detect client protocol error */
-+#define ENET_DMA_CH_CFG_MAX_BURST			0x0c		/* max burst length permitted */
-+#define  ENET_DMA_CH_CFG_MAX_BURST_DESCSIZE_SEL		0x00040000	/* DMA Descriptor Size Selection */
-+#define ENET_DMA_CH_CFG_SIZE				0x10
-+
-+#define ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR		0x00		/* descriptor ring start address */
-+#define ENET_DMA_CH_STATE_RAM_STATE_DATA		0x04		/* state/bytes done/ring offset */
-+#define ENET_DMA_CH_STATE_RAM_DESC_LEN_STATUS		0x08		/* buffer descriptor status and len */
-+#define ENET_DMA_CH_STATE_RAM_DESC_BASE_BUFPTR		0x0c		/* buffer descrpitor current processing */
-+#define ENET_DMA_CH_STATE_RAM_SIZE			0x10
-+
-+#define DMA_CTL_STATUS_APPEND_CRC			0x00000100
-+#define DMA_CTL_STATUS_APPEND_BRCM_TAG			0x00000200
-+#define DMA_CTL_STATUS_PRIO				0x00000C00  /* Prio for Tx */
-+#define DMA_CTL_STATUS_WRAP				0x00001000  /* */
-+#define DMA_CTL_STATUS_SOP				0x00002000  /* first buffer in packet */
-+#define DMA_CTL_STATUS_EOP				0x00004000  /* last buffer in packet */
-+#define DMA_CTL_STATUS_OWN				0x00008000  /* cleared by DMA, set by SW */
-+#define DMA_CTL_LEN_DESC_BUFLENGTH			0x0fff0000
-+#define DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT		16
-+#define DMA_CTL_LEN_DESC_MULTICAST			0x40000000
-+#define DMA_CTL_LEN_DESC_USEFPM				0x80000000
-+
-+#endif
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0004-net-broadcom-bcm4908_enet-drop-unneeded-memset.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0004-net-broadcom-bcm4908_enet-drop-unneeded-memset.patch
deleted file mode 100644
index 561f045b75dd..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0004-net-broadcom-bcm4908_enet-drop-unneeded-memset.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From af263af64683f018be9ce3c309edfa9903f5109a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:35 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: drop unneeded memset()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-dma_alloc_coherent takes care of zeroing allocated memory
-
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -163,8 +163,6 @@ static int bcm4908_dma_alloc_buf_descs(s
- 	if (!ring->slots)
- 		goto err_free_buf_descs;
- 
--	memset(ring->cpu_addr, 0, size);
--
- 	ring->read_idx = 0;
- 	ring->write_idx = 0;
- 
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0005-net-broadcom-bcm4908_enet-drop-inline-from-C-functio.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0005-net-broadcom-bcm4908_enet-drop-inline-from-C-functio.patch
deleted file mode 100644
index a8c188f30d28..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0005-net-broadcom-bcm4908_enet-drop-inline-from-C-functio.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 7b778ae4eb9cd6e1518e4e47902a104b13ae8929 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:36 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: drop "inline" from C functions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It seems preferred to let compiler optimize code if applicable.
-While at it drop unused enet_umac_maskset().
-
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 19 +++++++------------
- 1 file changed, 7 insertions(+), 12 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -75,17 +75,17 @@ struct bcm4908_enet {
-  * R/W ops
-  */
- 
--static inline u32 enet_read(struct bcm4908_enet *enet, u16 offset)
-+static u32 enet_read(struct bcm4908_enet *enet, u16 offset)
- {
- 	return readl(enet->base + offset);
- }
- 
--static inline void enet_write(struct bcm4908_enet *enet, u16 offset, u32 value)
-+static void enet_write(struct bcm4908_enet *enet, u16 offset, u32 value)
- {
- 	writel(value, enet->base + offset);
- }
- 
--static inline void enet_maskset(struct bcm4908_enet *enet, u16 offset, u32 mask, u32 set)
-+static void enet_maskset(struct bcm4908_enet *enet, u16 offset, u32 mask, u32 set)
- {
- 	u32 val;
- 
-@@ -96,27 +96,22 @@ static inline void enet_maskset(struct b
- 	enet_write(enet, offset, val);
- }
- 
--static inline void enet_set(struct bcm4908_enet *enet, u16 offset, u32 set)
-+static void enet_set(struct bcm4908_enet *enet, u16 offset, u32 set)
- {
- 	enet_maskset(enet, offset, set, set);
- }
- 
--static inline u32 enet_umac_read(struct bcm4908_enet *enet, u16 offset)
-+static u32 enet_umac_read(struct bcm4908_enet *enet, u16 offset)
- {
- 	return enet_read(enet, ENET_UNIMAC + offset);
- }
- 
--static inline void enet_umac_write(struct bcm4908_enet *enet, u16 offset, u32 value)
-+static void enet_umac_write(struct bcm4908_enet *enet, u16 offset, u32 value)
- {
- 	enet_write(enet, ENET_UNIMAC + offset, value);
- }
- 
--static inline void enet_umac_maskset(struct bcm4908_enet *enet, u16 offset, u32 mask, u32 set)
--{
--	enet_maskset(enet, ENET_UNIMAC + offset, mask, set);
--}
--
--static inline void enet_umac_set(struct bcm4908_enet *enet, u16 offset, u32 set)
-+static void enet_umac_set(struct bcm4908_enet *enet, u16 offset, u32 set)
- {
- 	enet_set(enet, ENET_UNIMAC + offset, set);
- }
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0006-net-broadcom-bcm4908_enet-fix-minor-typos.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0006-net-broadcom-bcm4908_enet-fix-minor-typos.patch
deleted file mode 100644
index 1aacb1c8cf46..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0006-net-broadcom-bcm4908_enet-fix-minor-typos.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From e3948811720341f99cd5cb4a8a650473400ec4f8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:37 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: fix minor typos
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Fix "ensable" typo noticed by Andrew
-2. Fix chipset name in the struct net_device_ops variable
-
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -328,8 +328,8 @@ static int bcm4908_enet_dma_init(struct
- 	return 0;
- }
- 
--static void bcm4908_enet_dma_tx_ring_ensable(struct bcm4908_enet *enet,
--					     struct bcm4908_enet_dma_ring *ring)
-+static void bcm4908_enet_dma_tx_ring_enable(struct bcm4908_enet *enet,
-+					    struct bcm4908_enet_dma_ring *ring)
- {
- 	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG, ENET_DMA_CH_CFG_ENABLE);
- }
-@@ -519,7 +519,7 @@ static int bcm4908_enet_start_xmit(struc
- 	buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr);
- 	buf_desc->ctl = cpu_to_le32(tmp);
- 
--	bcm4908_enet_dma_tx_ring_ensable(enet, &enet->tx_ring);
-+	bcm4908_enet_dma_tx_ring_enable(enet, &enet->tx_ring);
- 
- 	if (++ring->write_idx == ring->length - 1)
- 		ring->write_idx = 0;
-@@ -583,7 +583,7 @@ static int bcm4908_enet_poll(struct napi
- 	return handled;
- }
- 
--static const struct net_device_ops bcm96xx_netdev_ops = {
-+static const struct net_device_ops bcm4908_enet_netdev_ops = {
- 	.ndo_open = bcm4908_enet_open,
- 	.ndo_stop = bcm4908_enet_stop,
- 	.ndo_start_xmit = bcm4908_enet_start_xmit,
-@@ -623,7 +623,7 @@ static int bcm4908_enet_probe(struct pla
- 
- 	SET_NETDEV_DEV(netdev, &pdev->dev);
- 	eth_hw_addr_random(netdev);
--	netdev->netdev_ops = &bcm96xx_netdev_ops;
-+	netdev->netdev_ops = &bcm4908_enet_netdev_ops;
- 	netdev->min_mtu = ETH_ZLEN;
- 	netdev->mtu = ENET_MTU_MAX;
- 	netdev->max_mtu = ENET_MTU_MAX;
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0007-net-broadcom-bcm4908_enet-fix-received-skb-length.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0007-net-broadcom-bcm4908_enet-fix-received-skb-length.patch
deleted file mode 100644
index 1b51979d71ca..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0007-net-broadcom-bcm4908_enet-fix-received-skb-length.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 195e2d9febfbeef1d09701c387925e5c2f5cb038 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:38 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: fix received skb length
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use ETH_FCS_LEN instead of magic value and drop incorrect + 2
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -567,7 +567,7 @@ static int bcm4908_enet_poll(struct napi
- 
- 		dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE);
- 
--		skb_put(slot.skb, len - 4 + 2);
-+		skb_put(slot.skb, len - ETH_FCS_LEN);
- 		slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev);
- 		netif_receive_skb(slot.skb);
- 
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0008-net-broadcom-bcm4908_enet-fix-endianness-in-xmit-cod.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0008-net-broadcom-bcm4908_enet-fix-endianness-in-xmit-cod.patch
deleted file mode 100644
index eda0bf482eaa..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0008-net-broadcom-bcm4908_enet-fix-endianness-in-xmit-cod.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From bdd70b997799099597fc0952fb0ec1bd80505bc4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 13:12:39 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: fix endianness in xmit code
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use le32_to_cpu() for reading __le32 struct field filled by hw.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -476,7 +476,7 @@ static int bcm4908_enet_start_xmit(struc
- 	/* Free transmitted skbs */
- 	while (ring->read_idx != ring->write_idx) {
- 		buf_desc = &ring->buf_desc[ring->read_idx];
--		if (buf_desc->ctl & DMA_CTL_STATUS_OWN)
-+		if (le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)
- 			break;
- 		slot = &ring->slots[ring->read_idx];
- 
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0009-net-broadcom-bcm4908_enet-set-MTU-on-open-on-request.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0009-net-broadcom-bcm4908_enet-set-MTU-on-open-on-request.patch
deleted file mode 100644
index 0201bfeda3ef..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0009-net-broadcom-bcm4908_enet-set-MTU-on-open-on-request.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 14b3b46a67f78ade99eafcbf320105615e948569 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Feb 2021 16:21:35 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: set MTU on open & on request
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Hardware comes up with default max frame size set to 1518. When using it
-with switch it results in actual Ethernet MTU 1492:
-1518 - 14 (Ethernet header) - 4 (Broadcom's tag) - 4 (802.1q) - 4 (FCS)
-
-Above means hardware in its default state can't handle standard Ethernet
-traffic (MTU 1500).
-
-Define maximum possible Ethernet overhead and always set MAC max frame
-length accordingly. This change fixes handling Ethernet frames of length
-1506 - 1514.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 31 ++++++++++++++++----
- 1 file changed, 25 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -5,6 +5,7 @@
- 
- #include <linux/delay.h>
- #include <linux/etherdevice.h>
-+#include <linux/if_vlan.h>
- #include <linux/interrupt.h>
- #include <linux/module.h>
- #include <linux/of.h>
-@@ -29,9 +30,10 @@
- 						 ENET_DMA_CH_CFG_INT_BUFF_DONE)
- #define ENET_DMA_MAX_BURST_LEN			8 /* in 64 bit words */
- 
--#define ENET_MTU_MIN				60
--#define ENET_MTU_MAX				1500 /* Is it possible to support 2044? */
--#define ENET_MTU_MAX_EXTRA_SIZE			32 /* L2 */
-+#define ENET_MTU_MAX				ETH_DATA_LEN /* Is it possible to support 2044? */
-+#define BRCM_MAX_TAG_LEN			6
-+#define ENET_MAX_ETH_OVERHEAD			(ETH_HLEN + BRCM_MAX_TAG_LEN + VLAN_HLEN + \
-+						 ETH_FCS_LEN + 4) /* 32 */
- 
- struct bcm4908_enet_dma_ring_bd {
- 	__le32 ctl;
-@@ -135,6 +137,11 @@ static void bcm4908_enet_intrs_ack(struc
- 	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
- }
- 
-+static void bcm4908_enet_set_mtu(struct bcm4908_enet *enet, int mtu)
-+{
-+	enet_umac_write(enet, UMAC_MAX_FRAME_LEN, mtu + ENET_MAX_ETH_OVERHEAD);
-+}
-+
- /***
-  * DMA
-  */
-@@ -246,7 +253,7 @@ static int bcm4908_enet_dma_alloc_rx_buf
- 	u32 tmp;
- 	int err;
- 
--	slot->len = ENET_MTU_MAX + ENET_MTU_MAX_EXTRA_SIZE;
-+	slot->len = ENET_MTU_MAX + ENET_MAX_ETH_OVERHEAD;
- 
- 	slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
- 	if (!slot->skb)
-@@ -374,6 +381,8 @@ static void bcm4908_enet_gmac_init(struc
- {
- 	u32 cmd;
- 
-+	bcm4908_enet_set_mtu(enet, enet->netdev->mtu);
-+
- 	cmd = enet_umac_read(enet, UMAC_CMD);
- 	enet_umac_write(enet, UMAC_CMD, cmd | CMD_SW_RESET);
- 	enet_umac_write(enet, UMAC_CMD, cmd & ~CMD_SW_RESET);
-@@ -559,7 +568,7 @@ static int bcm4908_enet_poll(struct napi
- 
- 		len = (ctl & DMA_CTL_LEN_DESC_BUFLENGTH) >> DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
- 
--		if (len < ENET_MTU_MIN ||
-+		if (len < ETH_ZLEN ||
- 		    (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
- 			enet->netdev->stats.rx_dropped++;
- 			break;
-@@ -583,11 +592,21 @@ static int bcm4908_enet_poll(struct napi
- 	return handled;
- }
- 
-+static int bcm4908_enet_change_mtu(struct net_device *netdev, int new_mtu)
-+{
-+	struct bcm4908_enet *enet = netdev_priv(netdev);
-+
-+	bcm4908_enet_set_mtu(enet, new_mtu);
-+
-+	return 0;
-+}
-+
- static const struct net_device_ops bcm4908_enet_netdev_ops = {
- 	.ndo_open = bcm4908_enet_open,
- 	.ndo_stop = bcm4908_enet_stop,
- 	.ndo_start_xmit = bcm4908_enet_start_xmit,
- 	.ndo_set_mac_address = eth_mac_addr,
-+	.ndo_change_mtu = bcm4908_enet_change_mtu,
- };
- 
- static int bcm4908_enet_probe(struct platform_device *pdev)
-@@ -625,7 +644,7 @@ static int bcm4908_enet_probe(struct pla
- 	eth_hw_addr_random(netdev);
- 	netdev->netdev_ops = &bcm4908_enet_netdev_ops;
- 	netdev->min_mtu = ETH_ZLEN;
--	netdev->mtu = ENET_MTU_MAX;
-+	netdev->mtu = ETH_DATA_LEN;
- 	netdev->max_mtu = ENET_MTU_MAX;
- 	netif_napi_add(netdev, &enet->napi, bcm4908_enet_poll, 64);
- 
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0010-net-broadcom-bcm4908_enet-fix-RX-path-possible-mem-l.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0010-net-broadcom-bcm4908_enet-fix-RX-path-possible-mem-l.patch
deleted file mode 100644
index 8a2432412236..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0010-net-broadcom-bcm4908_enet-fix-RX-path-possible-mem-l.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 4dc7f09b8becfa35a55430a49d95acf19f996e6b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 24 Feb 2021 16:18:41 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: fix RX path possible mem leak
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-After filling RX ring slot with new skb it's required to free old skb.
-Immediately on error or later in the net subsystem.
-
-Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210224151842.2419-1-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -570,6 +570,7 @@ static int bcm4908_enet_poll(struct napi
- 
- 		if (len < ETH_ZLEN ||
- 		    (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
-+			kfree_skb(slot.skb);
- 			enet->netdev->stats.rx_dropped++;
- 			break;
- 		}
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0011-net-broadcom-bcm4908_enet-fix-NAPI-poll-returned-val.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0011-net-broadcom-bcm4908_enet-fix-NAPI-poll-returned-val.patch
deleted file mode 100644
index d4cf84e4b65e..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0011-net-broadcom-bcm4908_enet-fix-NAPI-poll-returned-val.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 4d9274cee40b6a20dd6148c6c81c6733c2678cbc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 24 Feb 2021 16:18:42 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: fix NAPI poll returned value
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Missing increment was resulting in poll function always returning 0
-instead of amount of processed packets.
-
-Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210224151842.2419-2-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -583,6 +583,8 @@ static int bcm4908_enet_poll(struct napi
- 
- 		enet->netdev->stats.rx_packets++;
- 		enet->netdev->stats.rx_bytes += len;
-+
-+		handled++;
- 	}
- 
- 	if (handled < weight) {
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0012-net-broadcom-bcm4908_enet-enable-RX-after-processing.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0012-net-broadcom-bcm4908_enet-enable-RX-after-processing.patch
deleted file mode 100644
index ad1bebf3ec2c..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0012-net-broadcom-bcm4908_enet-enable-RX-after-processing.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From d313d16bbaea0f11a2e98f04a6c678b43c208915 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 26 Feb 2021 14:20:38 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: enable RX after processing
- packets
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When receiving a lot of packets hardware may run out of free
-descriptiors and stop RX ring. Enable it every time after handling
-received packets.
-
-Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210226132038.29849-1-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -592,6 +592,9 @@ static int bcm4908_enet_poll(struct napi
- 		bcm4908_enet_intrs_on(enet);
- 	}
- 
-+	/* Hardware could disable ring if it run out of descriptors */
-+	bcm4908_enet_dma_rx_ring_enable(enet, &enet->rx_ring);
-+
- 	return handled;
- }
- 
diff --git a/target/linux/bcm4908/patches-5.10/073-v5.12-0013-net-broadcom-BCM4908_ENET-should-not-default-to-y-un.patch b/target/linux/bcm4908/patches-5.10/073-v5.12-0013-net-broadcom-BCM4908_ENET-should-not-default-to-y-un.patch
deleted file mode 100644
index 43e5ee01bf9b..000000000000
--- a/target/linux/bcm4908/patches-5.10/073-v5.12-0013-net-broadcom-BCM4908_ENET-should-not-default-to-y-un.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From a3bc483216650a7232559bf0a1debfbabff3e12c Mon Sep 17 00:00:00 2001
-From: Geert Uytterhoeven <geert+renesas@glider.be>
-Date: Tue, 16 Mar 2021 15:03:41 +0100
-Subject: [PATCH] net: broadcom: BCM4908_ENET should not default to y,
- unconditionally
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Merely enabling compile-testing should not enable additional code.
-To fix this, restrict the automatic enabling of BCM4908_ENET to
-ARCH_BCM4908.
-
-Fixes: 4feffeadbcb2e5b1 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
-Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/Kconfig
-+++ b/drivers/net/ethernet/broadcom/Kconfig
-@@ -54,7 +54,7 @@ config B44_PCI
- config BCM4908_ENET
- 	tristate "Broadcom BCM4908 internal mac support"
- 	depends on ARCH_BCM4908 || COMPILE_TEST
--	default y
-+	default y if ARCH_BCM4908
- 	help
- 	  This driver supports Ethernet controller integrated into Broadcom
- 	  BCM4908 family SoCs.
diff --git a/target/linux/bcm4908/patches-5.10/074-v5.13-0001-net-broadcom-bcm4908_enet-read-MAC-from-OF.patch b/target/linux/bcm4908/patches-5.10/074-v5.13-0001-net-broadcom-bcm4908_enet-read-MAC-from-OF.patch
deleted file mode 100644
index c4f336e67135..000000000000
--- a/target/linux/bcm4908/patches-5.10/074-v5.13-0001-net-broadcom-bcm4908_enet-read-MAC-from-OF.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 3559c1ea4336636c886002996d50805365d3055c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 10 Mar 2021 09:48:13 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: read MAC from OF
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 devices have MAC address accessible using NVMEM so it's needed
-to use OF helper for reading it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -9,6 +9,7 @@
- #include <linux/interrupt.h>
- #include <linux/module.h>
- #include <linux/of.h>
-+#include <linux/of_net.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include <linux/string.h>
-@@ -647,7 +648,9 @@ static int bcm4908_enet_probe(struct pla
- 		return err;
- 
- 	SET_NETDEV_DEV(netdev, &pdev->dev);
--	eth_hw_addr_random(netdev);
-+	of_get_mac_address(dev->of_node, netdev->dev_addr);
-+	if (!is_valid_ether_addr(netdev->dev_addr))
-+		eth_hw_addr_random(netdev);
- 	netdev->netdev_ops = &bcm4908_enet_netdev_ops;
- 	netdev->min_mtu = ETH_ZLEN;
- 	netdev->mtu = ETH_DATA_LEN;
diff --git a/target/linux/bcm4908/patches-5.10/074-v5.13-0002-dt-bindings-net-bcm4908-enet-add-optional-TX-interru.patch b/target/linux/bcm4908/patches-5.10/074-v5.13-0002-dt-bindings-net-bcm4908-enet-add-optional-TX-interru.patch
deleted file mode 100644
index b61437a2de22..000000000000
--- a/target/linux/bcm4908/patches-5.10/074-v5.13-0002-dt-bindings-net-bcm4908-enet-add-optional-TX-interru.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From ab4dda7a8cb7e55ea3d92fd5e249cf6f5396028c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Mar 2021 13:35:20 +0100
-Subject: [PATCH] dt-bindings: net: bcm4908-enet: add optional TX interrupt
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-I discovered that hardware actually supports two interrupts, one per DMA
-channel (RX and TX).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../bindings/net/brcm,bcm4908-enet.yaml         | 17 +++++++++++++----
- 1 file changed, 13 insertions(+), 4 deletions(-)
-
---- a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
-+++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
-@@ -22,10 +22,18 @@ properties:
-     maxItems: 1
- 
-   interrupts:
--    description: RX interrupt
-+    minItems: 1
-+    maxItems: 2
-+    items:
-+      - description: RX interrupt
-+      - description: TX interrupt
- 
-   interrupt-names:
--    const: rx
-+    minItems: 1
-+    maxItems: 2
-+    items:
-+      - const: rx
-+      - const: tx
- 
- required:
-   - reg
-@@ -43,6 +51,7 @@ examples:
-         compatible = "brcm,bcm4908-enet";
-         reg = <0x80002000 0x1000>;
- 
--        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
--        interrupt-names = "rx";
-+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-+        interrupt-names = "rx", "tx";
-     };
diff --git a/target/linux/bcm4908/patches-5.10/074-v5.13-0003-net-broadcom-bcm4908_enet-support-TX-interrupt.patch b/target/linux/bcm4908/patches-5.10/074-v5.13-0003-net-broadcom-bcm4908_enet-support-TX-interrupt.patch
deleted file mode 100644
index 03ac4b07bf32..000000000000
--- a/target/linux/bcm4908/patches-5.10/074-v5.13-0003-net-broadcom-bcm4908_enet-support-TX-interrupt.patch
+++ /dev/null
@@ -1,300 +0,0 @@
-From 12bb508bfe5a564c36864b12253db23cac83bfa1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Mar 2021 13:35:21 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: support TX interrupt
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It appears that each DMA channel has its own interrupt and both rings
-can be configured (the same way) to handle interrupts.
-
-1. Make ring interrupts code generic (make it operate on given ring)
-2. Move napi to ring (so each has its own)
-3. Make IRQ handler generic (match ring against received IRQ number)
-4. Add (optional) support for TX interrupt
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 138 ++++++++++++++-----
- 1 file changed, 103 insertions(+), 35 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -54,6 +54,7 @@ struct bcm4908_enet_dma_ring {
- 	int length;
- 	u16 cfg_block;
- 	u16 st_ram_block;
-+	struct napi_struct napi;
- 
- 	union {
- 		void *cpu_addr;
-@@ -67,8 +68,8 @@ struct bcm4908_enet_dma_ring {
- struct bcm4908_enet {
- 	struct device *dev;
- 	struct net_device *netdev;
--	struct napi_struct napi;
- 	void __iomem *base;
-+	int irq_tx;
- 
- 	struct bcm4908_enet_dma_ring tx_ring;
- 	struct bcm4908_enet_dma_ring rx_ring;
-@@ -123,24 +124,31 @@ static void enet_umac_set(struct bcm4908
-  * Helpers
-  */
- 
--static void bcm4908_enet_intrs_on(struct bcm4908_enet *enet)
-+static void bcm4908_enet_set_mtu(struct bcm4908_enet *enet, int mtu)
- {
--	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, ENET_DMA_INT_DEFAULTS);
-+	enet_umac_write(enet, UMAC_MAX_FRAME_LEN, mtu + ENET_MAX_ETH_OVERHEAD);
- }
- 
--static void bcm4908_enet_intrs_off(struct bcm4908_enet *enet)
-+/***
-+ * DMA ring ops
-+ */
-+
-+static void bcm4908_enet_dma_ring_intrs_on(struct bcm4908_enet *enet,
-+					   struct bcm4908_enet_dma_ring *ring)
- {
--	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_MASK, 0);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_MASK, ENET_DMA_INT_DEFAULTS);
- }
- 
--static void bcm4908_enet_intrs_ack(struct bcm4908_enet *enet)
-+static void bcm4908_enet_dma_ring_intrs_off(struct bcm4908_enet *enet,
-+					    struct bcm4908_enet_dma_ring *ring)
- {
--	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_MASK, 0);
- }
- 
--static void bcm4908_enet_set_mtu(struct bcm4908_enet *enet, int mtu)
-+static void bcm4908_enet_dma_ring_intrs_ack(struct bcm4908_enet *enet,
-+					    struct bcm4908_enet_dma_ring *ring)
- {
--	enet_umac_write(enet, UMAC_MAX_FRAME_LEN, mtu + ENET_MAX_ETH_OVERHEAD);
-+	enet_write(enet, ring->cfg_block + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
- }
- 
- /***
-@@ -414,11 +422,14 @@ static void bcm4908_enet_gmac_init(struc
- static irqreturn_t bcm4908_enet_irq_handler(int irq, void *dev_id)
- {
- 	struct bcm4908_enet *enet = dev_id;
-+	struct bcm4908_enet_dma_ring *ring;
- 
--	bcm4908_enet_intrs_off(enet);
--	bcm4908_enet_intrs_ack(enet);
-+	ring = (irq == enet->irq_tx) ? &enet->tx_ring : &enet->rx_ring;
- 
--	napi_schedule(&enet->napi);
-+	bcm4908_enet_dma_ring_intrs_off(enet, ring);
-+	bcm4908_enet_dma_ring_intrs_ack(enet, ring);
-+
-+	napi_schedule(&ring->napi);
- 
- 	return IRQ_HANDLED;
- }
-@@ -426,6 +437,8 @@ static irqreturn_t bcm4908_enet_irq_hand
- static int bcm4908_enet_open(struct net_device *netdev)
- {
- 	struct bcm4908_enet *enet = netdev_priv(netdev);
-+	struct bcm4908_enet_dma_ring *tx_ring = &enet->tx_ring;
-+	struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
- 	struct device *dev = enet->dev;
- 	int err;
- 
-@@ -435,6 +448,17 @@ static int bcm4908_enet_open(struct net_
- 		return err;
- 	}
- 
-+	if (enet->irq_tx > 0) {
-+		err = request_irq(enet->irq_tx, bcm4908_enet_irq_handler, 0,
-+				  "tx", enet);
-+		if (err) {
-+			dev_err(dev, "Failed to request IRQ %d: %d\n",
-+				enet->irq_tx, err);
-+			free_irq(netdev->irq, enet);
-+			return err;
-+		}
-+	}
-+
- 	bcm4908_enet_gmac_init(enet);
- 	bcm4908_enet_dma_reset(enet);
- 	bcm4908_enet_dma_init(enet);
-@@ -443,14 +467,19 @@ static int bcm4908_enet_open(struct net_
- 
- 	enet_set(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_MASTER_EN);
- 	enet_maskset(enet, ENET_DMA_CONTROLLER_CFG, ENET_DMA_CTRL_CFG_FLOWC_CH1_EN, 0);
--	bcm4908_enet_dma_rx_ring_enable(enet, &enet->rx_ring);
- 
--	napi_enable(&enet->napi);
-+	if (enet->irq_tx > 0) {
-+		napi_enable(&tx_ring->napi);
-+		bcm4908_enet_dma_ring_intrs_ack(enet, tx_ring);
-+		bcm4908_enet_dma_ring_intrs_on(enet, tx_ring);
-+	}
-+
-+	bcm4908_enet_dma_rx_ring_enable(enet, rx_ring);
-+	napi_enable(&rx_ring->napi);
- 	netif_carrier_on(netdev);
- 	netif_start_queue(netdev);
--
--	bcm4908_enet_intrs_ack(enet);
--	bcm4908_enet_intrs_on(enet);
-+	bcm4908_enet_dma_ring_intrs_ack(enet, rx_ring);
-+	bcm4908_enet_dma_ring_intrs_on(enet, rx_ring);
- 
- 	return 0;
- }
-@@ -458,16 +487,20 @@ static int bcm4908_enet_open(struct net_
- static int bcm4908_enet_stop(struct net_device *netdev)
- {
- 	struct bcm4908_enet *enet = netdev_priv(netdev);
-+	struct bcm4908_enet_dma_ring *tx_ring = &enet->tx_ring;
-+	struct bcm4908_enet_dma_ring *rx_ring = &enet->rx_ring;
- 
- 	netif_stop_queue(netdev);
- 	netif_carrier_off(netdev);
--	napi_disable(&enet->napi);
-+	napi_disable(&rx_ring->napi);
-+	napi_disable(&tx_ring->napi);
- 
- 	bcm4908_enet_dma_rx_ring_disable(enet, &enet->rx_ring);
- 	bcm4908_enet_dma_tx_ring_disable(enet, &enet->tx_ring);
- 
- 	bcm4908_enet_dma_uninit(enet);
- 
-+	free_irq(enet->irq_tx, enet);
- 	free_irq(enet->netdev->irq, enet);
- 
- 	return 0;
-@@ -484,25 +517,19 @@ static int bcm4908_enet_start_xmit(struc
- 	u32 tmp;
- 
- 	/* Free transmitted skbs */
--	while (ring->read_idx != ring->write_idx) {
--		buf_desc = &ring->buf_desc[ring->read_idx];
--		if (le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)
--			break;
--		slot = &ring->slots[ring->read_idx];
--
--		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
--		dev_kfree_skb(slot->skb);
--		if (++ring->read_idx == ring->length)
--			ring->read_idx = 0;
--	}
-+	if (enet->irq_tx < 0 &&
-+	    !(le32_to_cpu(ring->buf_desc[ring->read_idx].ctl) & DMA_CTL_STATUS_OWN))
-+		napi_schedule(&enet->tx_ring.napi);
- 
- 	/* Don't use the last empty buf descriptor */
- 	if (ring->read_idx <= ring->write_idx)
- 		free_buf_descs = ring->read_idx - ring->write_idx + ring->length;
- 	else
- 		free_buf_descs = ring->read_idx - ring->write_idx;
--	if (free_buf_descs < 2)
-+	if (free_buf_descs < 2) {
-+		netif_stop_queue(netdev);
- 		return NETDEV_TX_BUSY;
-+	}
- 
- 	/* Hardware removes OWN bit after sending data */
- 	buf_desc = &ring->buf_desc[ring->write_idx];
-@@ -539,9 +566,10 @@ static int bcm4908_enet_start_xmit(struc
- 	return NETDEV_TX_OK;
- }
- 
--static int bcm4908_enet_poll(struct napi_struct *napi, int weight)
-+static int bcm4908_enet_poll_rx(struct napi_struct *napi, int weight)
- {
--	struct bcm4908_enet *enet = container_of(napi, struct bcm4908_enet, napi);
-+	struct bcm4908_enet_dma_ring *rx_ring = container_of(napi, struct bcm4908_enet_dma_ring, napi);
-+	struct bcm4908_enet *enet = container_of(rx_ring, struct bcm4908_enet, rx_ring);
- 	struct device *dev = enet->dev;
- 	int handled = 0;
- 
-@@ -590,7 +618,7 @@ static int bcm4908_enet_poll(struct napi
- 
- 	if (handled < weight) {
- 		napi_complete_done(napi, handled);
--		bcm4908_enet_intrs_on(enet);
-+		bcm4908_enet_dma_ring_intrs_on(enet, rx_ring);
- 	}
- 
- 	/* Hardware could disable ring if it run out of descriptors */
-@@ -599,6 +627,42 @@ static int bcm4908_enet_poll(struct napi
- 	return handled;
- }
- 
-+static int bcm4908_enet_poll_tx(struct napi_struct *napi, int weight)
-+{
-+	struct bcm4908_enet_dma_ring *tx_ring = container_of(napi, struct bcm4908_enet_dma_ring, napi);
-+	struct bcm4908_enet *enet = container_of(tx_ring, struct bcm4908_enet, tx_ring);
-+	struct bcm4908_enet_dma_ring_bd *buf_desc;
-+	struct bcm4908_enet_dma_ring_slot *slot;
-+	struct device *dev = enet->dev;
-+	unsigned int bytes = 0;
-+	int handled = 0;
-+
-+	while (handled < weight && tx_ring->read_idx != tx_ring->write_idx) {
-+		buf_desc = &tx_ring->buf_desc[tx_ring->read_idx];
-+		if (le32_to_cpu(buf_desc->ctl) & DMA_CTL_STATUS_OWN)
-+			break;
-+		slot = &tx_ring->slots[tx_ring->read_idx];
-+
-+		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
-+		dev_kfree_skb(slot->skb);
-+		bytes += slot->len;
-+		if (++tx_ring->read_idx == tx_ring->length)
-+			tx_ring->read_idx = 0;
-+
-+		handled++;
-+	}
-+
-+	if (handled < weight) {
-+		napi_complete_done(napi, handled);
-+		bcm4908_enet_dma_ring_intrs_on(enet, tx_ring);
-+	}
-+
-+	if (netif_queue_stopped(enet->netdev))
-+		netif_wake_queue(enet->netdev);
-+
-+	return handled;
-+}
-+
- static int bcm4908_enet_change_mtu(struct net_device *netdev, int new_mtu)
- {
- 	struct bcm4908_enet *enet = netdev_priv(netdev);
-@@ -641,6 +705,8 @@ static int bcm4908_enet_probe(struct pla
- 	if (netdev->irq < 0)
- 		return netdev->irq;
- 
-+	enet->irq_tx = platform_get_irq_byname(pdev, "tx");
-+
- 	dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
- 
- 	err = bcm4908_enet_dma_alloc(enet);
-@@ -655,7 +721,8 @@ static int bcm4908_enet_probe(struct pla
- 	netdev->min_mtu = ETH_ZLEN;
- 	netdev->mtu = ETH_DATA_LEN;
- 	netdev->max_mtu = ENET_MTU_MAX;
--	netif_napi_add(netdev, &enet->napi, bcm4908_enet_poll, 64);
-+	netif_tx_napi_add(netdev, &enet->tx_ring.napi, bcm4908_enet_poll_tx, NAPI_POLL_WEIGHT);
-+	netif_napi_add(netdev, &enet->rx_ring.napi, bcm4908_enet_poll_rx, NAPI_POLL_WEIGHT);
- 
- 	err = register_netdev(netdev);
- 	if (err) {
-@@ -673,7 +740,8 @@ static int bcm4908_enet_remove(struct pl
- 	struct bcm4908_enet *enet = platform_get_drvdata(pdev);
- 
- 	unregister_netdev(enet->netdev);
--	netif_napi_del(&enet->napi);
-+	netif_napi_del(&enet->rx_ring.napi);
-+	netif_napi_del(&enet->tx_ring.napi);
- 	bcm4908_enet_dma_free(enet);
- 
- 	return 0;
diff --git a/target/linux/bcm4908/patches-5.10/075-v5.13-0001-net-dsa-bcm_sf2-store-PHY-interface-mode-in-port-str.patch b/target/linux/bcm4908/patches-5.10/075-v5.13-0001-net-dsa-bcm_sf2-store-PHY-interface-mode-in-port-str.patch
deleted file mode 100644
index 9b3a8317736a..000000000000
--- a/target/linux/bcm4908/patches-5.10/075-v5.13-0001-net-dsa-bcm_sf2-store-PHY-interface-mode-in-port-str.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 01488a0ccd9abe15565bed50a45afcddbb0fe199 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Mar 2021 11:41:07 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: store PHY interface/mode in port structure
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's needed later for proper switch / crossbar setup.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c | 16 ++++++++++++----
- drivers/net/dsa/bcm_sf2.h |  1 +
- 2 files changed, 13 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -446,10 +446,11 @@ static void bcm_sf2_intr_disable(struct
- static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv,
- 				   struct device_node *dn)
- {
-+	struct device *dev = priv->dev->ds->dev;
-+	struct bcm_sf2_port_status *port_st;
- 	struct device_node *port;
- 	unsigned int port_num;
- 	struct property *prop;
--	phy_interface_t mode;
- 	int err;
- 
- 	priv->moca_port = -1;
-@@ -458,19 +459,26 @@ static void bcm_sf2_identify_ports(struc
- 		if (of_property_read_u32(port, "reg", &port_num))
- 			continue;
- 
-+		if (port_num >= DSA_MAX_PORTS) {
-+			dev_err(dev, "Invalid port number %d\n", port_num);
-+			continue;
-+		}
-+
-+		port_st = &priv->port_sts[port_num];
-+
- 		/* Internal PHYs get assigned a specific 'phy-mode' property
- 		 * value: "internal" to help flag them before MDIO probing
- 		 * has completed, since they might be turned off at that
- 		 * time
- 		 */
--		err = of_get_phy_mode(port, &mode);
-+		err = of_get_phy_mode(port, &port_st->mode);
- 		if (err)
- 			continue;
- 
--		if (mode == PHY_INTERFACE_MODE_INTERNAL)
-+		if (port_st->mode == PHY_INTERFACE_MODE_INTERNAL)
- 			priv->int_phy_mask |= 1 << port_num;
- 
--		if (mode == PHY_INTERFACE_MODE_MOCA)
-+		if (port_st->mode == PHY_INTERFACE_MODE_MOCA)
- 			priv->moca_port = port_num;
- 
- 		if (of_property_read_bool(port, "brcm,use-bcm-hdr"))
---- a/drivers/net/dsa/bcm_sf2.h
-+++ b/drivers/net/dsa/bcm_sf2.h
-@@ -44,6 +44,7 @@ struct bcm_sf2_hw_params {
- #define BCM_SF2_REGS_NUM	6
- 
- struct bcm_sf2_port_status {
-+	phy_interface_t mode;
- 	unsigned int link;
- 	bool enabled;
- };
diff --git a/target/linux/bcm4908/patches-5.10/075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch b/target/linux/bcm4908/patches-5.10/075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch
deleted file mode 100644
index 823064830100..000000000000
--- a/target/linux/bcm4908/patches-5.10/075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From a9349f08ec6c1251d41ef167d27a15cc39bc5b97 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Mar 2021 11:41:08 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: setup BCM4908 internal crossbar
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On some SoCs (e.g. BCM4908, BCM631[345]8) SF2 has an integrated
-crossbar. It allows connecting its selected external ports to internal
-ports. It's used by vendors to handle custom Ethernet setups.
-
-BCM4908 has following 3x2 crossbar. On Asus GT-AC5300 rgmii is used for
-connecting external BCM53134S switch. GPHY4 is usually used for WAN
-port. More fancy devices use SerDes for 2.5 Gbps Ethernet.
-
-              ┌──────────┐
-SerDes ─── 0 ─┤          │
-              │   3x2    ├─ 0 ─── switch port 7
- GPHY4 ─── 1 ─┤          │
-              │ crossbar ├─ 1 ─── runner (accelerator)
- rgmii ─── 2 ─┤          │
-              └──────────┘
-
-Use setup data based on DT info to configure BCM4908's switch port 7.
-Right now only GPHY and rgmii variants are supported. Handling SerDes
-can be implemented later.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c      | 45 ++++++++++++++++++++++++++++++++++
- drivers/net/dsa/bcm_sf2.h      |  1 +
- drivers/net/dsa/bcm_sf2_regs.h |  7 ++++++
- 3 files changed, 53 insertions(+)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -435,6 +435,44 @@ static int bcm_sf2_sw_rst(struct bcm_sf2
- 	return 0;
- }
- 
-+static void bcm_sf2_crossbar_setup(struct bcm_sf2_priv *priv)
-+{
-+	struct device *dev = priv->dev->ds->dev;
-+	int shift;
-+	u32 mask;
-+	u32 reg;
-+	int i;
-+
-+	mask = BIT(priv->num_crossbar_int_ports) - 1;
-+
-+	reg = reg_readl(priv, REG_CROSSBAR);
-+	switch (priv->type) {
-+	case BCM4908_DEVICE_ID:
-+		shift = CROSSBAR_BCM4908_INT_P7 * priv->num_crossbar_int_ports;
-+		reg &= ~(mask << shift);
-+		if (0) /* FIXME */
-+			reg |= CROSSBAR_BCM4908_EXT_SERDES << shift;
-+		else if (priv->int_phy_mask & BIT(7))
-+			reg |= CROSSBAR_BCM4908_EXT_GPHY4 << shift;
-+		else if (phy_interface_mode_is_rgmii(priv->port_sts[7].mode))
-+			reg |= CROSSBAR_BCM4908_EXT_RGMII << shift;
-+		else if (WARN(1, "Invalid port mode\n"))
-+			return;
-+		break;
-+	default:
-+		return;
-+	}
-+	reg_writel(priv, reg, REG_CROSSBAR);
-+
-+	reg = reg_readl(priv, REG_CROSSBAR);
-+	for (i = 0; i < priv->num_crossbar_int_ports; i++) {
-+		shift = i * priv->num_crossbar_int_ports;
-+
-+		dev_dbg(dev, "crossbar int port #%d - ext port #%d\n", i,
-+			(reg >> shift) & mask);
-+	}
-+}
-+
- static void bcm_sf2_intr_disable(struct bcm_sf2_priv *priv)
- {
- 	intrl2_0_mask_set(priv, 0xffffffff);
-@@ -880,6 +918,8 @@ static int bcm_sf2_sw_resume(struct dsa_
- 		return ret;
- 	}
- 
-+	bcm_sf2_crossbar_setup(priv);
-+
- 	ret = bcm_sf2_cfp_resume(ds);
- 	if (ret)
- 		return ret;
-@@ -1151,6 +1191,7 @@ struct bcm_sf2_of_data {
- 	const u16 *reg_offsets;
- 	unsigned int core_reg_align;
- 	unsigned int num_cfp_rules;
-+	unsigned int num_crossbar_int_ports;
- };
- 
- static const u16 bcm_sf2_4908_reg_offsets[] = {
-@@ -1175,6 +1216,7 @@ static const struct bcm_sf2_of_data bcm_
- 	.core_reg_align	= 0,
- 	.reg_offsets	= bcm_sf2_4908_reg_offsets,
- 	.num_cfp_rules	= 0, /* FIXME */
-+	.num_crossbar_int_ports = 2,
- };
- 
- /* Register offsets for the SWITCH_REG_* block */
-@@ -1285,6 +1327,7 @@ static int bcm_sf2_sw_probe(struct platf
- 	priv->reg_offsets = data->reg_offsets;
- 	priv->core_reg_align = data->core_reg_align;
- 	priv->num_cfp_rules = data->num_cfp_rules;
-+	priv->num_crossbar_int_ports = data->num_crossbar_int_ports;
- 
- 	priv->rcdev = devm_reset_control_get_optional_exclusive(&pdev->dev,
- 								"switch");
-@@ -1358,6 +1401,8 @@ static int bcm_sf2_sw_probe(struct platf
- 		goto out_clk_mdiv;
- 	}
- 
-+	bcm_sf2_crossbar_setup(priv);
-+
- 	bcm_sf2_gphy_enable_set(priv->dev->ds, true);
- 
- 	ret = bcm_sf2_mdio_register(ds);
---- a/drivers/net/dsa/bcm_sf2.h
-+++ b/drivers/net/dsa/bcm_sf2.h
-@@ -74,6 +74,7 @@ struct bcm_sf2_priv {
- 	const u16			*reg_offsets;
- 	unsigned int			core_reg_align;
- 	unsigned int			num_cfp_rules;
-+	unsigned int			num_crossbar_int_ports;
- 
- 	/* spinlock protecting access to the indirect registers */
- 	spinlock_t			indir_lock;
---- a/drivers/net/dsa/bcm_sf2_regs.h
-+++ b/drivers/net/dsa/bcm_sf2_regs.h
-@@ -48,6 +48,13 @@ enum bcm_sf2_reg_offs {
- #define  PHY_PHYAD_SHIFT		8
- #define  PHY_PHYAD_MASK			0x1F
- 
-+/* Relative to REG_CROSSBAR */
-+#define CROSSBAR_BCM4908_INT_P7		0
-+#define CROSSBAR_BCM4908_INT_RUNNER	1
-+#define CROSSBAR_BCM4908_EXT_SERDES	0
-+#define CROSSBAR_BCM4908_EXT_GPHY4	1
-+#define CROSSBAR_BCM4908_EXT_RGMII	2
-+
- #define REG_RGMII_CNTRL_P(x)		(REG_RGMII_0_CNTRL + (x))
- 
- /* Relative to REG_RGMII_CNTRL */
diff --git a/target/linux/bcm4908/patches-5.10/075-v5.13-0003-net-dsa-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch b/target/linux/bcm4908/patches-5.10/075-v5.13-0003-net-dsa-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch
deleted file mode 100644
index dc8479b4794d..000000000000
--- a/target/linux/bcm4908/patches-5.10/075-v5.13-0003-net-dsa-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From f4e6d7cdbfae502788bc468295b232dec76ee57e Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri, 12 Mar 2021 13:11:01 -0800
-Subject: [PATCH] net: dsa: bcm_sf2: Fill in BCM4908 CFP entries
-
-The BCM4908 switch has 256 CFP entrie, update that setting so CFP can be
-used.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1215,7 +1215,7 @@ static const struct bcm_sf2_of_data bcm_
- 	.type		= BCM4908_DEVICE_ID,
- 	.core_reg_align	= 0,
- 	.reg_offsets	= bcm_sf2_4908_reg_offsets,
--	.num_cfp_rules	= 0, /* FIXME */
-+	.num_cfp_rules	= 256,
- 	.num_crossbar_int_ports = 2,
- };
- 
diff --git a/target/linux/bcm4908/patches-5.10/075-v5.13-0004-net-dsa-bcm_sf2-add-function-finding-RGMII-register.patch b/target/linux/bcm4908/patches-5.10/075-v5.13-0004-net-dsa-bcm_sf2-add-function-finding-RGMII-register.patch
deleted file mode 100644
index 281a8bbcda9f..000000000000
--- a/target/linux/bcm4908/patches-5.10/075-v5.13-0004-net-dsa-bcm_sf2-add-function-finding-RGMII-register.patch
+++ /dev/null
@@ -1,161 +0,0 @@
-From 55cfeb396965c3906a84d09a9c487d065e37773b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 18 Mar 2021 09:01:42 +0100
-Subject: [PATCH 1/2] net: dsa: bcm_sf2: add function finding RGMII register
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Simple macro like REG_RGMII_CNTRL_P() is insufficient as:
-1. It doesn't validate port argument
-2. It doesn't support chipsets with non-lineral RGMII regs layout
-
-Missing port validation could result in getting register offset from out
-of array. Random memory -> random offset -> random reads/writes. It
-affected e.g. BCM4908 for REG_RGMII_CNTRL_P(7).
-
-Fixes: a78e86ed586d ("net: dsa: bcm_sf2: Prepare for different register layouts")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c      | 49 +++++++++++++++++++++++++++++-----
- drivers/net/dsa/bcm_sf2_regs.h |  2 --
- 2 files changed, 42 insertions(+), 9 deletions(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -75,6 +75,31 @@ static void bcm_sf2_recalc_clock(struct
- 	clk_set_rate(priv->clk_mdiv, new_rate);
- }
- 
-+static u16 bcm_sf2_reg_rgmii_cntrl(struct bcm_sf2_priv *priv, int port)
-+{
-+	switch (priv->type) {
-+	case BCM4908_DEVICE_ID:
-+		/* TODO */
-+		break;
-+	default:
-+		switch (port) {
-+		case 0:
-+			return REG_RGMII_0_CNTRL;
-+		case 1:
-+			return REG_RGMII_1_CNTRL;
-+		case 2:
-+			return REG_RGMII_2_CNTRL;
-+		default:
-+			break;
-+		}
-+	}
-+
-+	WARN_ONCE(1, "Unsupported port %d\n", port);
-+
-+	/* RO fallback reg */
-+	return REG_SWITCH_STATUS;
-+}
-+
- static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
- {
- 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-@@ -696,6 +721,7 @@ static void bcm_sf2_sw_mac_config(struct
- {
- 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- 	u32 id_mode_dis = 0, port_mode;
-+	u32 reg_rgmii_ctrl;
- 	u32 reg;
- 
- 	if (port == core_readl(priv, CORE_IMP0_PRT_ID))
-@@ -719,10 +745,12 @@ static void bcm_sf2_sw_mac_config(struct
- 		return;
- 	}
- 
-+	reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
-+
- 	/* Clear id_mode_dis bit, and the existing port mode, let
- 	 * RGMII_MODE_EN bet set by mac_link_{up,down}
- 	 */
--	reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
-+	reg = reg_readl(priv, reg_rgmii_ctrl);
- 	reg &= ~ID_MODE_DIS;
- 	reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
- 
-@@ -730,13 +758,14 @@ static void bcm_sf2_sw_mac_config(struct
- 	if (id_mode_dis)
- 		reg |= ID_MODE_DIS;
- 
--	reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
-+	reg_writel(priv, reg, reg_rgmii_ctrl);
- }
- 
- static void bcm_sf2_sw_mac_link_set(struct dsa_switch *ds, int port,
- 				    phy_interface_t interface, bool link)
- {
- 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-+	u32 reg_rgmii_ctrl;
- 	u32 reg;
- 
- 	if (!phy_interface_mode_is_rgmii(interface) &&
-@@ -744,13 +773,15 @@ static void bcm_sf2_sw_mac_link_set(stru
- 	    interface != PHY_INTERFACE_MODE_REVMII)
- 		return;
- 
-+	reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
-+
- 	/* If the link is down, just disable the interface to conserve power */
--	reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
-+	reg = reg_readl(priv, reg_rgmii_ctrl);
- 	if (link)
- 		reg |= RGMII_MODE_EN;
- 	else
- 		reg &= ~RGMII_MODE_EN;
--	reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
-+	reg_writel(priv, reg, reg_rgmii_ctrl);
- }
- 
- static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
-@@ -787,11 +818,15 @@ static void bcm_sf2_sw_mac_link_up(struc
- {
- 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- 	struct ethtool_eee *p = &priv->dev->ports[port].eee;
--	u32 reg, offset;
- 
- 	bcm_sf2_sw_mac_link_set(ds, port, interface, true);
- 
- 	if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
-+		u32 reg_rgmii_ctrl;
-+		u32 reg, offset;
-+
-+		reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
-+
- 		if (priv->type == BCM4908_DEVICE_ID ||
- 		    priv->type == BCM7445_DEVICE_ID)
- 			offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
-@@ -802,7 +837,7 @@ static void bcm_sf2_sw_mac_link_up(struc
- 		    interface == PHY_INTERFACE_MODE_RGMII_TXID ||
- 		    interface == PHY_INTERFACE_MODE_MII ||
- 		    interface == PHY_INTERFACE_MODE_REVMII) {
--			reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
-+			reg = reg_readl(priv, reg_rgmii_ctrl);
- 			reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
- 
- 			if (tx_pause)
-@@ -810,7 +845,7 @@ static void bcm_sf2_sw_mac_link_up(struc
- 			if (rx_pause)
- 				reg |= RX_PAUSE_EN;
- 
--			reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
-+			reg_writel(priv, reg, reg_rgmii_ctrl);
- 		}
- 
- 		reg = SW_OVERRIDE | LINK_STS;
---- a/drivers/net/dsa/bcm_sf2_regs.h
-+++ b/drivers/net/dsa/bcm_sf2_regs.h
-@@ -55,8 +55,6 @@ enum bcm_sf2_reg_offs {
- #define CROSSBAR_BCM4908_EXT_GPHY4	1
- #define CROSSBAR_BCM4908_EXT_RGMII	2
- 
--#define REG_RGMII_CNTRL_P(x)		(REG_RGMII_0_CNTRL + (x))
--
- /* Relative to REG_RGMII_CNTRL */
- #define  RGMII_MODE_EN			(1 << 0)
- #define  ID_MODE_DIS			(1 << 1)
diff --git a/target/linux/bcm4908/patches-5.10/075-v5.13-0005-net-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch b/target/linux/bcm4908/patches-5.10/075-v5.13-0005-net-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch
deleted file mode 100644
index cf1c36c527ea..000000000000
--- a/target/linux/bcm4908/patches-5.10/075-v5.13-0005-net-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 6859d91549341c2ad769d482de58129f080c0f04 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 18 Mar 2021 09:01:43 +0100
-Subject: [PATCH 2/2] net: dsa: bcm_sf2: fix BCM4908 RGMII reg(s)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has only 1 RGMII reg for controlling port 7.
-
-Fixes: 73b7a6047971 ("net: dsa: bcm_sf2: support BCM4908's integrated switch")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c      | 11 +++++++----
- drivers/net/dsa/bcm_sf2_regs.h |  1 +
- 2 files changed, 8 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -79,7 +79,12 @@ static u16 bcm_sf2_reg_rgmii_cntrl(struc
- {
- 	switch (priv->type) {
- 	case BCM4908_DEVICE_ID:
--		/* TODO */
-+		switch (port) {
-+		case 7:
-+			return REG_RGMII_11_CNTRL;
-+		default:
-+			break;
-+		}
- 		break;
- 	default:
- 		switch (port) {
-@@ -1238,9 +1243,7 @@ static const u16 bcm_sf2_4908_reg_offset
- 	[REG_PHY_REVISION]	= 0x14,
- 	[REG_SPHY_CNTRL]	= 0x24,
- 	[REG_CROSSBAR]		= 0xc8,
--	[REG_RGMII_0_CNTRL]	= 0xe0,
--	[REG_RGMII_1_CNTRL]	= 0xec,
--	[REG_RGMII_2_CNTRL]	= 0xf8,
-+	[REG_RGMII_11_CNTRL]	= 0x014c,
- 	[REG_LED_0_CNTRL]	= 0x40,
- 	[REG_LED_1_CNTRL]	= 0x4c,
- 	[REG_LED_2_CNTRL]	= 0x58,
---- a/drivers/net/dsa/bcm_sf2_regs.h
-+++ b/drivers/net/dsa/bcm_sf2_regs.h
-@@ -21,6 +21,7 @@ enum bcm_sf2_reg_offs {
- 	REG_RGMII_0_CNTRL,
- 	REG_RGMII_1_CNTRL,
- 	REG_RGMII_2_CNTRL,
-+	REG_RGMII_11_CNTRL,
- 	REG_LED_0_CNTRL,
- 	REG_LED_1_CNTRL,
- 	REG_LED_2_CNTRL,
diff --git a/target/linux/bcm4908/patches-5.10/075-v5.13-0006-net-dsa-bcm_sf2-Fix-bcm_sf2_reg_rgmii_cntrl-call-for.patch b/target/linux/bcm4908/patches-5.10/075-v5.13-0006-net-dsa-bcm_sf2-Fix-bcm_sf2_reg_rgmii_cntrl-call-for.patch
deleted file mode 100644
index f7e9bcb5a259..000000000000
--- a/target/linux/bcm4908/patches-5.10/075-v5.13-0006-net-dsa-bcm_sf2-Fix-bcm_sf2_reg_rgmii_cntrl-call-for.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From fc516d3a6aa2c6ffe27d0da8818d13839e023e7e Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri, 21 May 2021 10:46:14 -0700
-Subject: [PATCH] net: dsa: bcm_sf2: Fix bcm_sf2_reg_rgmii_cntrl() call for
- non-RGMII port
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-We cannot call bcm_sf2_reg_rgmii_cntrl() for a port that is not RGMII,
-yet we do that in bcm_sf2_sw_mac_link_up() irrespective of the port's
-interface. Move that read until we have properly qualified the PHY
-interface mode. This avoids triggering a warning on 7278 platforms that
-have GMII ports.
-
-Fixes: 55cfeb396965 ("net: dsa: bcm_sf2: add function finding RGMII register")
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/bcm_sf2.c | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -827,11 +827,9 @@ static void bcm_sf2_sw_mac_link_up(struc
- 	bcm_sf2_sw_mac_link_set(ds, port, interface, true);
- 
- 	if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
--		u32 reg_rgmii_ctrl;
-+		u32 reg_rgmii_ctrl = 0;
- 		u32 reg, offset;
- 
--		reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
--
- 		if (priv->type == BCM4908_DEVICE_ID ||
- 		    priv->type == BCM7445_DEVICE_ID)
- 			offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
-@@ -842,6 +840,7 @@ static void bcm_sf2_sw_mac_link_up(struc
- 		    interface == PHY_INTERFACE_MODE_RGMII_TXID ||
- 		    interface == PHY_INTERFACE_MODE_MII ||
- 		    interface == PHY_INTERFACE_MODE_REVMII) {
-+			reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
- 			reg = reg_readl(priv, reg_rgmii_ctrl);
- 			reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
- 
diff --git a/target/linux/bcm4908/patches-5.10/076-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch b/target/linux/bcm4908/patches-5.10/076-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch
deleted file mode 100644
index df8dcd8a2c35..000000000000
--- a/target/linux/bcm4908/patches-5.10/076-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch
+++ /dev/null
@@ -1,209 +0,0 @@
-From af30f8eaa8fe4ff1987280f716309711997bd979 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 29 Dec 2021 18:16:42 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: refactor LED regs access
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Define more regs. Some switches (e.g. BCM4908) have up to 6 regs.
-2. Add helper for handling non-lineral port <-> reg mappings.
-3. Add support for 12 B LED reg blocks on BCM4908 (different layout)
-
-Complete support for LEDs setup will be implemented once Linux receives
-a proper design & implementation for "hardware" LEDs.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20211229171642.22942-1-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/bcm_sf2.c      | 54 ++++++++++++++++++++++++----
- drivers/net/dsa/bcm_sf2.h      | 10 ++++++
- drivers/net/dsa/bcm_sf2_regs.h | 65 +++++++++++++++++++++++++++++++---
- 3 files changed, 119 insertions(+), 10 deletions(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -32,6 +32,38 @@
- #include "b53/b53_priv.h"
- #include "b53/b53_regs.h"
- 
-+static u16 bcm_sf2_reg_led_base(struct bcm_sf2_priv *priv, int port)
-+{
-+	switch (port) {
-+	case 0:
-+		return REG_LED_0_CNTRL;
-+	case 1:
-+		return REG_LED_1_CNTRL;
-+	case 2:
-+		return REG_LED_2_CNTRL;
-+	}
-+
-+	switch (priv->type) {
-+	case BCM4908_DEVICE_ID:
-+		switch (port) {
-+		case 3:
-+			return REG_LED_3_CNTRL;
-+		case 7:
-+			return REG_LED_4_CNTRL;
-+		default:
-+			break;
-+		}
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	WARN_ONCE(1, "Unsupported port %d\n", port);
-+
-+	/* RO fallback reg */
-+	return REG_SWITCH_STATUS;
-+}
-+
- /* Return the number of active ports, not counting the IMP (CPU) port */
- static unsigned int bcm_sf2_num_active_ports(struct dsa_switch *ds)
- {
-@@ -187,9 +219,14 @@ static void bcm_sf2_gphy_enable_set(stru
- 
- 	/* Use PHY-driven LED signaling */
- 	if (!enable) {
--		reg = reg_readl(priv, REG_LED_CNTRL(0));
--		reg |= SPDLNK_SRC_SEL;
--		reg_writel(priv, reg, REG_LED_CNTRL(0));
-+		u16 led_ctrl = bcm_sf2_reg_led_base(priv, 0);
-+
-+		if (priv->type == BCM7278_DEVICE_ID ||
-+		    priv->type == BCM7445_DEVICE_ID) {
-+			reg = reg_led_readl(priv, led_ctrl, 0);
-+			reg |= LED_CNTRL_SPDLNK_SRC_SEL;
-+			reg_led_writel(priv, reg, led_ctrl, 0);
-+		}
- 	}
- }
- 
-@@ -1243,9 +1280,14 @@ static const u16 bcm_sf2_4908_reg_offset
- 	[REG_SPHY_CNTRL]	= 0x24,
- 	[REG_CROSSBAR]		= 0xc8,
- 	[REG_RGMII_11_CNTRL]	= 0x014c,
--	[REG_LED_0_CNTRL]	= 0x40,
--	[REG_LED_1_CNTRL]	= 0x4c,
--	[REG_LED_2_CNTRL]	= 0x58,
-+	[REG_LED_0_CNTRL]		= 0x40,
-+	[REG_LED_1_CNTRL]		= 0x4c,
-+	[REG_LED_2_CNTRL]		= 0x58,
-+	[REG_LED_3_CNTRL]		= 0x64,
-+	[REG_LED_4_CNTRL]		= 0x88,
-+	[REG_LED_5_CNTRL]		= 0xa0,
-+	[REG_LED_AGGREGATE_CTRL]	= 0xb8,
-+
- };
- 
- static const struct bcm_sf2_of_data bcm_sf2_4908_data = {
---- a/drivers/net/dsa/bcm_sf2.h
-+++ b/drivers/net/dsa/bcm_sf2.h
-@@ -210,6 +210,16 @@ SF2_IO_MACRO(acb);
- SWITCH_INTR_L2(0);
- SWITCH_INTR_L2(1);
- 
-+static inline u32 reg_led_readl(struct bcm_sf2_priv *priv, u16 off, u16 reg)
-+{
-+	return readl_relaxed(priv->reg + priv->reg_offsets[off] + reg);
-+}
-+
-+static inline void reg_led_writel(struct bcm_sf2_priv *priv, u32 val, u16 off, u16 reg)
-+{
-+	writel_relaxed(val, priv->reg + priv->reg_offsets[off] + reg);
-+}
-+
- /* RXNFC */
- int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
- 		      struct ethtool_rxnfc *nfc, u32 *rule_locs);
---- a/drivers/net/dsa/bcm_sf2_regs.h
-+++ b/drivers/net/dsa/bcm_sf2_regs.h
-@@ -25,6 +25,10 @@ enum bcm_sf2_reg_offs {
- 	REG_LED_0_CNTRL,
- 	REG_LED_1_CNTRL,
- 	REG_LED_2_CNTRL,
-+	REG_LED_3_CNTRL,
-+	REG_LED_4_CNTRL,
-+	REG_LED_5_CNTRL,
-+	REG_LED_AGGREGATE_CTRL,
- 	REG_SWITCH_REG_MAX,
- };
- 
-@@ -56,6 +60,63 @@ enum bcm_sf2_reg_offs {
- #define CROSSBAR_BCM4908_EXT_GPHY4	1
- #define CROSSBAR_BCM4908_EXT_RGMII	2
- 
-+/* Relative to REG_LED_*_CNTRL (BCM7278, BCM7445) */
-+#define  LED_CNTRL_NO_LINK_ENCODE_SHIFT		0
-+#define  LED_CNTRL_M10_ENCODE_SHIFT		2
-+#define  LED_CNTRL_M100_ENCODE_SHIFT		4
-+#define  LED_CNTRL_M1000_ENCODE_SHIFT		6
-+#define  LED_CNTRL_SEL_NO_LINK_ENCODE_SHIFT	8
-+#define  LED_CNTRL_SEL_10M_ENCODE_SHIFT		10
-+#define  LED_CNTRL_SEL_100M_ENCODE_SHIFT	12
-+#define  LED_CNTRL_SEL_1000M_ENCODE_SHIFT	14
-+#define  LED_CNTRL_RX_DV_EN			(1 << 16)
-+#define  LED_CNTRL_TX_EN_EN			(1 << 17)
-+#define  LED_CNTRL_SPDLNK_LED0_ACT_SEL_SHIFT	18
-+#define  LED_CNTRL_SPDLNK_LED1_ACT_SEL_SHIFT	20
-+#define  LED_CNTRL_ACT_LED_ACT_SEL_SHIFT	22
-+#define  LED_CNTRL_SPDLNK_SRC_SEL		(1 << 24)
-+#define  LED_CNTRL_SPDLNK_LED0_ACT_POL_SEL	(1 << 25)
-+#define  LED_CNTRL_SPDLNK_LED1_ACT_POL_SEL	(1 << 26)
-+#define  LED_CNTRL_ACT_LED_POL_SEL		(1 << 27)
-+#define  LED_CNTRL_MASK				0x3
-+
-+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
-+#define REG_LED_CTRL				0x0
-+#define  LED_CTRL_RX_ACT_EN			0x00000001
-+#define  LED_CTRL_TX_ACT_EN			0x00000002
-+#define  LED_CTRL_SPDLNK_LED0_ACT_SEL		0x00000004
-+#define  LED_CTRL_SPDLNK_LED1_ACT_SEL		0x00000008
-+#define  LED_CTRL_SPDLNK_LED2_ACT_SEL		0x00000010
-+#define  LED_CTRL_ACT_LED_ACT_SEL		0x00000020
-+#define  LED_CTRL_SPDLNK_LED0_ACT_POL_SEL	0x00000040
-+#define  LED_CTRL_SPDLNK_LED1_ACT_POL_SEL	0x00000080
-+#define  LED_CTRL_SPDLNK_LED2_ACT_POL_SEL	0x00000100
-+#define  LED_CTRL_ACT_LED_POL_SEL		0x00000200
-+#define  LED_CTRL_LED_SPD_OVRD			0x00001c00
-+#define  LED_CTRL_LNK_STATUS_OVRD		0x00002000
-+#define  LED_CTRL_SPD_OVRD_EN			0x00004000
-+#define  LED_CTRL_LNK_OVRD_EN			0x00008000
-+
-+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
-+#define REG_LED_LINK_SPEED_ENC_SEL		0x4
-+#define  LED_LINK_SPEED_ENC_SEL_NO_LINK_SHIFT	0
-+#define  LED_LINK_SPEED_ENC_SEL_10M_SHIFT	3
-+#define  LED_LINK_SPEED_ENC_SEL_100M_SHIFT	6
-+#define  LED_LINK_SPEED_ENC_SEL_1000M_SHIFT	9
-+#define  LED_LINK_SPEED_ENC_SEL_2500M_SHIFT	12
-+#define  LED_LINK_SPEED_ENC_SEL_10G_SHIFT	15
-+#define  LED_LINK_SPEED_ENC_SEL_MASK		0x7
-+
-+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
-+#define REG_LED_LINK_SPEED_ENC			0x8
-+#define  LED_LINK_SPEED_ENC_NO_LINK_SHIFT	0
-+#define  LED_LINK_SPEED_ENC_M10_SHIFT		3
-+#define  LED_LINK_SPEED_ENC_M100_SHIFT		6
-+#define  LED_LINK_SPEED_ENC_M1000_SHIFT		9
-+#define  LED_LINK_SPEED_ENC_M2500_SHIFT		12
-+#define  LED_LINK_SPEED_ENC_M10G_SHIFT		15
-+#define  LED_LINK_SPEED_ENC_MASK		0x7
-+
- /* Relative to REG_RGMII_CNTRL */
- #define  RGMII_MODE_EN			(1 << 0)
- #define  ID_MODE_DIS			(1 << 1)
-@@ -73,10 +134,6 @@ enum bcm_sf2_reg_offs {
- #define  LPI_COUNT_SHIFT		9
- #define  LPI_COUNT_MASK			0x3F
- 
--#define REG_LED_CNTRL(x)		(REG_LED_0_CNTRL + (x))
--
--#define  SPDLNK_SRC_SEL			(1 << 24)
--
- /* Register set relative to 'INTRL2_0' and 'INTRL2_1' */
- #define INTRL2_CPU_STATUS		0x00
- #define INTRL2_CPU_SET			0x04
diff --git a/target/linux/bcm4908/patches-5.10/077-v5.14-net-broadcom-bcm4908_enet-reset-DMA-rings-sw-indexes.patch b/target/linux/bcm4908/patches-5.10/077-v5.14-net-broadcom-bcm4908_enet-reset-DMA-rings-sw-indexes.patch
deleted file mode 100644
index 02290c8e64eb..000000000000
--- a/target/linux/bcm4908/patches-5.10/077-v5.14-net-broadcom-bcm4908_enet-reset-DMA-rings-sw-indexes.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From ddeacc4f6494e07cbb6f033627926623f3e7a9d0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 22 Jun 2021 07:24:15 +0200
-Subject: [PATCH] net: broadcom: bcm4908_enet: reset DMA rings sw indexes
- properly
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Resetting software indexes in bcm4908_dma_alloc_buf_descs() is not
-enough as it's called during device probe only. Driver resets DMA on
-every .ndo_open callback and it's required to reset indexes then.
-
-This fixes inconsistent rings state and stalled traffic after interface
-down & up sequence.
-
-Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -174,9 +174,6 @@ static int bcm4908_dma_alloc_buf_descs(s
- 	if (!ring->slots)
- 		goto err_free_buf_descs;
- 
--	ring->read_idx = 0;
--	ring->write_idx = 0;
--
- 	return 0;
- 
- err_free_buf_descs:
-@@ -303,6 +300,9 @@ static void bcm4908_enet_dma_ring_init(s
- 
- 	enet_write(enet, ring->st_ram_block + ENET_DMA_CH_STATE_RAM_BASE_DESC_PTR,
- 		   (uint32_t)ring->dma_addr);
-+
-+	ring->read_idx = 0;
-+	ring->write_idx = 0;
- }
- 
- static void bcm4908_enet_dma_uninit(struct bcm4908_enet *enet)
diff --git a/target/linux/bcm4908/patches-5.10/077-v5.17-net-broadcom-bcm4908enet-remove-redundant-variable-b.patch b/target/linux/bcm4908/patches-5.10/077-v5.17-net-broadcom-bcm4908enet-remove-redundant-variable-b.patch
deleted file mode 100644
index 03e546cb5f51..000000000000
--- a/target/linux/bcm4908/patches-5.10/077-v5.17-net-broadcom-bcm4908enet-remove-redundant-variable-b.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 62a3106697f3c6f9af64a2cd0f9ff58552010dc8 Mon Sep 17 00:00:00 2001
-From: Colin Ian King <colin.i.king@gmail.com>
-Date: Wed, 22 Dec 2021 00:39:37 +0000
-Subject: [PATCH] net: broadcom: bcm4908enet: remove redundant variable bytes
-
-The variable bytes is being used to summate slot lengths,
-however the value is never used afterwards. The summation
-is redundant so remove variable bytes.
-
-Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
-Link: https://lore.kernel.org/r/20211222003937.727325-1-colin.i.king@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -634,7 +634,6 @@ static int bcm4908_enet_poll_tx(struct n
- 	struct bcm4908_enet_dma_ring_bd *buf_desc;
- 	struct bcm4908_enet_dma_ring_slot *slot;
- 	struct device *dev = enet->dev;
--	unsigned int bytes = 0;
- 	int handled = 0;
- 
- 	while (handled < weight && tx_ring->read_idx != tx_ring->write_idx) {
-@@ -645,7 +644,6 @@ static int bcm4908_enet_poll_tx(struct n
- 
- 		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
- 		dev_kfree_skb(slot->skb);
--		bytes += slot->len;
- 		if (++tx_ring->read_idx == tx_ring->length)
- 			tx_ring->read_idx = 0;
- 
diff --git a/target/linux/bcm4908/patches-5.10/078-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch b/target/linux/bcm4908/patches-5.10/078-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch
deleted file mode 100644
index a6eba111f94a..000000000000
--- a/target/linux/bcm4908/patches-5.10/078-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From e93a766da57fff3273bcb618edf5dfca1fb86b89 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 15 Sep 2022 15:30:13 +0200
-Subject: [PATCH] net: broadcom: bcm4908_enet: handle -EPROBE_DEFER when
- getting MAC
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Reading MAC from OF may return -EPROBE_DEFER if underlaying NVMEM device
-isn't ready yet. In such case pass that error code up and "wait" to be
-probed later.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20220915133013.2243-1-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -712,7 +712,9 @@ static int bcm4908_enet_probe(struct pla
- 		return err;
- 
- 	SET_NETDEV_DEV(netdev, &pdev->dev);
--	of_get_mac_address(dev->of_node, netdev->dev_addr);
-+	err = of_get_mac_address(dev->of_node, netdev->dev_addr);
-+	if (err == -EPROBE_DEFER)
-+		goto err_dma_free;
- 	if (!is_valid_ether_addr(netdev->dev_addr))
- 		eth_hw_addr_random(netdev);
- 	netdev->netdev_ops = &bcm4908_enet_netdev_ops;
-@@ -723,14 +725,17 @@ static int bcm4908_enet_probe(struct pla
- 	netif_napi_add(netdev, &enet->rx_ring.napi, bcm4908_enet_poll_rx, NAPI_POLL_WEIGHT);
- 
- 	err = register_netdev(netdev);
--	if (err) {
--		bcm4908_enet_dma_free(enet);
--		return err;
--	}
-+	if (err)
-+		goto err_dma_free;
- 
- 	platform_set_drvdata(pdev, enet);
- 
- 	return 0;
-+
-+err_dma_free:
-+	bcm4908_enet_dma_free(enet);
-+
-+	return err;
- }
- 
- static int bcm4908_enet_remove(struct platform_device *pdev)
diff --git a/target/linux/bcm4908/patches-5.10/078-v6.1-0002-net-broadcom-bcm4908_enet-update-TX-stats-after-actu.patch b/target/linux/bcm4908/patches-5.10/078-v6.1-0002-net-broadcom-bcm4908_enet-update-TX-stats-after-actu.patch
deleted file mode 100644
index 29cf3742f419..000000000000
--- a/target/linux/bcm4908/patches-5.10/078-v6.1-0002-net-broadcom-bcm4908_enet-update-TX-stats-after-actu.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From ef3556ee16c68735ec69bd08df41d1cd83b14ad3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 27 Oct 2022 13:24:30 +0200
-Subject: [PATCH] net: broadcom: bcm4908_enet: update TX stats after actual
- transmission
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Queueing packets doesn't guarantee their transmission. Update TX stats
-after hardware confirms consuming submitted data.
-
-This also fixes a possible race and NULL dereference.
-bcm4908_enet_start_xmit() could try to access skb after freeing it in
-the bcm4908_enet_poll_tx().
-
-Reported-by: Florian Fainelli <f.fainelli@gmail.com>
-Fixes: 4feffeadbcb2e ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20221027112430.8696-1-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 12 ++++++++----
- 1 file changed, 8 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -560,8 +560,6 @@ static int bcm4908_enet_start_xmit(struc
- 
- 	if (++ring->write_idx == ring->length - 1)
- 		ring->write_idx = 0;
--	enet->netdev->stats.tx_bytes += skb->len;
--	enet->netdev->stats.tx_packets++;
- 
- 	return NETDEV_TX_OK;
- }
-@@ -634,6 +632,7 @@ static int bcm4908_enet_poll_tx(struct n
- 	struct bcm4908_enet_dma_ring_bd *buf_desc;
- 	struct bcm4908_enet_dma_ring_slot *slot;
- 	struct device *dev = enet->dev;
-+	unsigned int bytes = 0;
- 	int handled = 0;
- 
- 	while (handled < weight && tx_ring->read_idx != tx_ring->write_idx) {
-@@ -644,12 +643,17 @@ static int bcm4908_enet_poll_tx(struct n
- 
- 		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
- 		dev_kfree_skb(slot->skb);
--		if (++tx_ring->read_idx == tx_ring->length)
--			tx_ring->read_idx = 0;
- 
- 		handled++;
-+		bytes += slot->len;
-+
-+		if (++tx_ring->read_idx == tx_ring->length)
-+			tx_ring->read_idx = 0;
- 	}
- 
-+	enet->netdev->stats.tx_packets += handled;
-+	enet->netdev->stats.tx_bytes += bytes;
-+
- 	if (handled < weight) {
- 		napi_complete_done(napi, handled);
- 		bcm4908_enet_dma_ring_intrs_on(enet, tx_ring);
diff --git a/target/linux/bcm4908/patches-5.10/079-v6.2-0001-net-broadcom-bcm4908_enet-use-build_skb.patch b/target/linux/bcm4908/patches-5.10/079-v6.2-0001-net-broadcom-bcm4908_enet-use-build_skb.patch
deleted file mode 100644
index 834973f5c781..000000000000
--- a/target/linux/bcm4908/patches-5.10/079-v6.2-0001-net-broadcom-bcm4908_enet-use-build_skb.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From 3a1cc23a75abcd9cea585eb84846507363d58397 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 25 Oct 2022 15:22:45 +0200
-Subject: [PATCH] net: broadcom: bcm4908_enet: use build_skb()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-RX code can be more efficient with the build_skb(). Allocating actual
-SKB around eth packet buffer - right before passing it up - results in
-a better cache usage.
-
-Without RPS (echo 0 > rps_cpus) BCM4908 NAT masq performance "jumps"
-between two speeds: ~900 Mbps and 940 Mbps (it's a 4 CPUs SoC). This
-change bumps the lower speed from 905 Mb/s to 918 Mb/s (tested using
-single stream iperf 2.0.5 traffic).
-
-There are more optimizations to consider. One obvious to try is GRO
-however as BCM4908 doesn't do hw csum is may actually lower performance.
-Sometimes. Some early testing:
-
-┌─────────────────────────────────┬─────────────────────┬────────────────────┐
-│                                 │ netif_receive_skb() │ napi_gro_receive() │
-├─────────────────────────────────┼─────────────────────┼────────────────────┤
-│ netdev_alloc_skb()              │            905 Mb/s │           892 Mb/s │
-│ napi_alloc_frag() + build_skb() │            918 Mb/s │           917 Mb/s │
-└─────────────────────────────────┴─────────────────────┴────────────────────┘
-
-Another ideas:
-1. napi_build_skb()
-2. skb_copy_from_linear_data() for small packets
-
-Those need proper testing first though. That can be done later.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20221025132245.22871-1-zajec5@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 53 +++++++++++++-------
- 1 file changed, 36 insertions(+), 17 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -36,13 +36,24 @@
- #define ENET_MAX_ETH_OVERHEAD			(ETH_HLEN + BRCM_MAX_TAG_LEN + VLAN_HLEN + \
- 						 ETH_FCS_LEN + 4) /* 32 */
- 
-+#define ENET_RX_SKB_BUF_SIZE			(NET_SKB_PAD + NET_IP_ALIGN + \
-+						 ETH_HLEN + BRCM_MAX_TAG_LEN + VLAN_HLEN + \
-+						 ENET_MTU_MAX + ETH_FCS_LEN + 4)
-+#define ENET_RX_SKB_BUF_ALLOC_SIZE		(SKB_DATA_ALIGN(ENET_RX_SKB_BUF_SIZE) + \
-+						 SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
-+#define ENET_RX_BUF_DMA_OFFSET			(NET_SKB_PAD + NET_IP_ALIGN)
-+#define ENET_RX_BUF_DMA_SIZE			(ENET_RX_SKB_BUF_SIZE - ENET_RX_BUF_DMA_OFFSET)
-+
- struct bcm4908_enet_dma_ring_bd {
- 	__le32 ctl;
- 	__le32 addr;
- } __packed;
- 
- struct bcm4908_enet_dma_ring_slot {
--	struct sk_buff *skb;
-+	union {
-+		void *buf;			/* RX */
-+		struct sk_buff *skb;		/* TX */
-+	};
- 	unsigned int len;
- 	dma_addr_t dma_addr;
- };
-@@ -259,22 +270,21 @@ static int bcm4908_enet_dma_alloc_rx_buf
- 	u32 tmp;
- 	int err;
- 
--	slot->len = ENET_MTU_MAX + ENET_MAX_ETH_OVERHEAD;
--
--	slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
--	if (!slot->skb)
-+	slot->buf = napi_alloc_frag(ENET_RX_SKB_BUF_ALLOC_SIZE);
-+	if (!slot->buf)
- 		return -ENOMEM;
- 
--	slot->dma_addr = dma_map_single(dev, slot->skb->data, slot->len, DMA_FROM_DEVICE);
-+	slot->dma_addr = dma_map_single(dev, slot->buf + ENET_RX_BUF_DMA_OFFSET,
-+					ENET_RX_BUF_DMA_SIZE, DMA_FROM_DEVICE);
- 	err = dma_mapping_error(dev, slot->dma_addr);
- 	if (err) {
- 		dev_err(dev, "Failed to map DMA buffer: %d\n", err);
--		kfree_skb(slot->skb);
--		slot->skb = NULL;
-+		skb_free_frag(slot->buf);
-+		slot->buf = NULL;
- 		return err;
- 	}
- 
--	tmp = slot->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+	tmp = ENET_RX_BUF_DMA_SIZE << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
- 	tmp |= DMA_CTL_STATUS_OWN;
- 	if (idx == enet->rx_ring.length - 1)
- 		tmp |= DMA_CTL_STATUS_WRAP;
-@@ -314,11 +324,11 @@ static void bcm4908_enet_dma_uninit(stru
- 
- 	for (i = rx_ring->length - 1; i >= 0; i--) {
- 		slot = &rx_ring->slots[i];
--		if (!slot->skb)
-+		if (!slot->buf)
- 			continue;
- 		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_FROM_DEVICE);
--		kfree_skb(slot->skb);
--		slot->skb = NULL;
-+		skb_free_frag(slot->buf);
-+		slot->buf = NULL;
- 	}
- }
- 
-@@ -574,6 +584,7 @@ static int bcm4908_enet_poll_rx(struct n
- 	while (handled < weight) {
- 		struct bcm4908_enet_dma_ring_bd *buf_desc;
- 		struct bcm4908_enet_dma_ring_slot slot;
-+		struct sk_buff *skb;
- 		u32 ctl;
- 		int len;
- 		int err;
-@@ -597,16 +608,24 @@ static int bcm4908_enet_poll_rx(struct n
- 
- 		if (len < ETH_ZLEN ||
- 		    (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
--			kfree_skb(slot.skb);
-+			skb_free_frag(slot.buf);
- 			enet->netdev->stats.rx_dropped++;
- 			break;
- 		}
- 
--		dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE);
-+		dma_unmap_single(dev, slot.dma_addr, ENET_RX_BUF_DMA_SIZE, DMA_FROM_DEVICE);
-+
-+		skb = build_skb(slot.buf, ENET_RX_SKB_BUF_ALLOC_SIZE);
-+		if (unlikely(!skb)) {
-+			skb_free_frag(slot.buf);
-+			enet->netdev->stats.rx_dropped++;
-+			break;
-+		}
-+		skb_reserve(skb, ENET_RX_BUF_DMA_OFFSET);
-+		skb_put(skb, len - ETH_FCS_LEN);
-+		skb->protocol = eth_type_trans(skb, enet->netdev);
- 
--		skb_put(slot.skb, len - ETH_FCS_LEN);
--		slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev);
--		netif_receive_skb(slot.skb);
-+		netif_receive_skb(skb);
- 
- 		enet->netdev->stats.rx_packets++;
- 		enet->netdev->stats.rx_bytes += len;
diff --git a/target/linux/bcm4908/patches-5.10/079-v6.2-0002-net-broadcom-bcm4908_enet-report-queued-and-transmit.patch b/target/linux/bcm4908/patches-5.10/079-v6.2-0002-net-broadcom-bcm4908_enet-report-queued-and-transmit.patch
deleted file mode 100644
index 9f85a77b76ac..000000000000
--- a/target/linux/bcm4908/patches-5.10/079-v6.2-0002-net-broadcom-bcm4908_enet-report-queued-and-transmit.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 471ef777ec79baadc5cd9773d08f95f49cf5e2b1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 31 Oct 2022 11:48:56 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: report queued and transmitted
- bytes
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows BQL to operate avoiding buffer bloat and reducing latency.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20221031104856.32388-1-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -504,6 +504,7 @@ static int bcm4908_enet_stop(struct net_
- 	netif_carrier_off(netdev);
- 	napi_disable(&rx_ring->napi);
- 	napi_disable(&tx_ring->napi);
-+	netdev_reset_queue(netdev);
- 
- 	bcm4908_enet_dma_rx_ring_disable(enet, &enet->rx_ring);
- 	bcm4908_enet_dma_tx_ring_disable(enet, &enet->tx_ring);
-@@ -563,6 +564,8 @@ static int bcm4908_enet_start_xmit(struc
- 	if (ring->write_idx + 1 == ring->length - 1)
- 		tmp |= DMA_CTL_STATUS_WRAP;
- 
-+	netdev_sent_queue(enet->netdev, skb->len);
-+
- 	buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr);
- 	buf_desc->ctl = cpu_to_le32(tmp);
- 
-@@ -670,6 +673,7 @@ static int bcm4908_enet_poll_tx(struct n
- 			tx_ring->read_idx = 0;
- 	}
- 
-+	netdev_completed_queue(enet->netdev, handled, bytes);
- 	enet->netdev->stats.tx_packets += handled;
- 	enet->netdev->stats.tx_bytes += bytes;
- 
diff --git a/target/linux/bcm4908/patches-5.10/080-v5.11-tty-serial-bcm63xx-lower-driver-dependencies.patch b/target/linux/bcm4908/patches-5.10/080-v5.11-tty-serial-bcm63xx-lower-driver-dependencies.patch
deleted file mode 100644
index 38e3d056b993..000000000000
--- a/target/linux/bcm4908/patches-5.10/080-v5.11-tty-serial-bcm63xx-lower-driver-dependencies.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From f35a07f92616700733636c06dd6e5b6cdc807fe4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 25 Nov 2020 10:06:08 +0100
-Subject: [PATCH] tty: serial: bcm63xx: lower driver dependencies
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Hardware supported by bcm63xx is also used by BCM4908 SoCs family that
-is ARM64. In future more architectures may need it as well. There is
-nothing arch specific breaking compilation so just stick to requiring
-COMMON_CLK.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20201125090608.28442-1-zajec5@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/tty/serial/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -1133,7 +1133,7 @@ config SERIAL_TIMBERDALE
- config SERIAL_BCM63XX
- 	tristate "Broadcom BCM63xx/BCM33xx UART support"
- 	select SERIAL_CORE
--	depends on MIPS || ARM || COMPILE_TEST
-+	depends on COMMON_CLK
- 	help
- 	  This enables the driver for the onchip UART core found on
- 	  the following chipsets:
diff --git a/target/linux/bcm4908/patches-5.10/081-v5.12-reset-simple-add-BCM4908-MISC-PCIe-reset-controller-.patch b/target/linux/bcm4908/patches-5.10/081-v5.12-reset-simple-add-BCM4908-MISC-PCIe-reset-controller-.patch
deleted file mode 100644
index 28702c9d0e8b..000000000000
--- a/target/linux/bcm4908/patches-5.10/081-v5.12-reset-simple-add-BCM4908-MISC-PCIe-reset-controller-.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From def26913b66fd94e431afecf28e09c08e8c02a35 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 27 Nov 2020 12:14:42 +0100
-Subject: [PATCH] reset: simple: add BCM4908 MISC PCIe reset controller support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a trivial reset controller. One register with bit per PCIe core.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
----
- drivers/reset/Kconfig        | 2 +-
- drivers/reset/reset-simple.c | 2 ++
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/reset/Kconfig
-+++ b/drivers/reset/Kconfig
-@@ -167,7 +167,7 @@ config RESET_SCMI
- 
- config RESET_SIMPLE
- 	bool "Simple Reset Controller Driver" if COMPILE_TEST
--	default ARCH_AGILEX || ARCH_ASPEED || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARC
-+	default ARCH_AGILEX || ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARC
- 	help
- 	  This enables a simple reset controller driver for reset lines that
- 	  that can be asserted and deasserted by toggling bits in a contiguous,
---- a/drivers/reset/reset-simple.c
-+++ b/drivers/reset/reset-simple.c
-@@ -146,6 +146,8 @@ static const struct of_device_id reset_s
- 	{ .compatible = "aspeed,ast2500-lpc-reset" },
- 	{ .compatible = "bitmain,bm1880-reset",
- 		.data = &reset_simple_active_low },
-+	{ .compatible = "brcm,bcm4908-misc-pcie-reset",
-+		.data = &reset_simple_active_low },
- 	{ .compatible = "snps,dw-high-reset" },
- 	{ .compatible = "snps,dw-low-reset",
- 		.data = &reset_simple_active_low },
diff --git a/target/linux/bcm4908/patches-5.10/082-v5.12-0001-dt-bindings-power-document-Broadcom-s-PMB-binding.patch b/target/linux/bcm4908/patches-5.10/082-v5.12-0001-dt-bindings-power-document-Broadcom-s-PMB-binding.patch
deleted file mode 100644
index c5c1a5dc7e35..000000000000
--- a/target/linux/bcm4908/patches-5.10/082-v5.12-0001-dt-bindings-power-document-Broadcom-s-PMB-binding.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 82853543057f78d8a331272b70bc3f1e8cb0cbf4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 14 Dec 2020 19:07:42 +0100
-Subject: [PATCH] dt-bindings: power: document Broadcom's PMB binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom's PMB is power controller used for disabling and enabling SoC
-devices.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bindings/power/brcm,bcm-pmb.yaml          | 50 +++++++++++++++++++
- include/dt-bindings/soc/bcm-pmb.h             | 11 ++++
- 2 files changed, 61 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml
- create mode 100644 include/dt-bindings/soc/bcm-pmb.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml
-@@ -0,0 +1,50 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/power/brcm,bcm-pmb.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom PMB (Power Management Bus) controller
-+
-+description: This document describes Broadcom's PMB controller. It supports
-+  powering various types of connected devices (e.g. PCIe, USB, SATA).
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    enum:
-+      - brcm,bcm4908-pmb
-+
-+  reg:
-+    description: register space of one or more buses
-+    maxItems: 1
-+
-+  big-endian:
-+    $ref: /schemas/types.yaml#/definitions/flag
-+    description: Flag to use for block working in big endian mode.
-+
-+  "#power-domain-cells":
-+    description: cell specifies device ID (see bcm-pmb.h)
-+    const: 1
-+
-+required:
-+  - reg
-+  - "#power-domain-cells"
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/soc/bcm-pmb.h>
-+
-+    pmb: power-controller@802800e0 {
-+        compatible = "brcm,bcm4908-pmb";
-+        reg = <0x802800e0 0x40>;
-+        #power-domain-cells = <1>;
-+    };
-+
-+    foo {
-+        power-domains = <&pmb BCM_PMB_PCIE0>;
-+    };
---- /dev/null
-+++ b/include/dt-bindings/soc/bcm-pmb.h
-@@ -0,0 +1,11 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT */
-+
-+#ifndef __DT_BINDINGS_SOC_BCM_PMB_H
-+#define __DT_BINDINGS_SOC_BCM_PMB_H
-+
-+#define BCM_PMB_PCIE0				0x01
-+#define BCM_PMB_PCIE1				0x02
-+#define BCM_PMB_PCIE2				0x03
-+#define BCM_PMB_HOST_USB			0x04
-+
-+#endif
diff --git a/target/linux/bcm4908/patches-5.10/082-v5.12-0002-soc-bcm-add-PM-driver-for-Broadcom-s-PMB.patch b/target/linux/bcm4908/patches-5.10/082-v5.12-0002-soc-bcm-add-PM-driver-for-Broadcom-s-PMB.patch
deleted file mode 100644
index 8cbf33f5a930..000000000000
--- a/target/linux/bcm4908/patches-5.10/082-v5.12-0002-soc-bcm-add-PM-driver-for-Broadcom-s-PMB.patch
+++ /dev/null
@@ -1,409 +0,0 @@
-From 8bcac4011ebe0dbdd46fd55b036ee855c95702d3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 14 Dec 2020 19:07:43 +0100
-Subject: [PATCH] soc: bcm: add PM driver for Broadcom's PMB
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-PMB originally comes from BCM63138 but can be also found on many other
-chipsets (e.g. BCM4908). It's needed to power on and off SoC blocks like
-PCIe, SATA, USB.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- MAINTAINERS                       |  10 +
- drivers/soc/bcm/Makefile          |   2 +-
- drivers/soc/bcm/bcm63xx/Kconfig   |   9 +
- drivers/soc/bcm/bcm63xx/Makefile  |   1 +
- drivers/soc/bcm/bcm63xx/bcm-pmb.c | 333 ++++++++++++++++++++++++++++++
- 5 files changed, 354 insertions(+), 1 deletion(-)
- create mode 100644 drivers/soc/bcm/bcm63xx/bcm-pmb.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3674,6 +3674,16 @@ L:	linux-mips@vger.kernel.org
- S:	Maintained
- F:	drivers/firmware/broadcom/*
- 
-+BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
-+M:	Rafał Miłecki <rafal@milecki.pl>
-+M:	Florian Fainelli <f.fainelli@gmail.com>
-+M:	bcm-kernel-feedback-list@broadcom.com
-+L:	linux-pm@vger.kernel.org
-+S:	Maintained
-+T:	git git://github.com/broadcom/stblinux.git
-+F:	drivers/soc/bcm/bcm-pmb.c
-+F:	include/dt-bindings/soc/bcm-pmb.h
-+
- BROADCOM SPECIFIC AMBA DRIVER (BCMA)
- M:	Rafał Miłecki <zajec5@gmail.com>
- L:	linux-wireless@vger.kernel.org
---- a/drivers/soc/bcm/Makefile
-+++ b/drivers/soc/bcm/Makefile
-@@ -1,5 +1,5 @@
- # SPDX-License-Identifier: GPL-2.0-only
- obj-$(CONFIG_BCM2835_POWER)	+= bcm2835-power.o
- obj-$(CONFIG_RASPBERRYPI_POWER)	+= raspberrypi-power.o
--obj-$(CONFIG_SOC_BCM63XX)	+= bcm63xx/
-+obj-y				+= bcm63xx/
- obj-$(CONFIG_SOC_BRCMSTB)	+= brcmstb/
---- a/drivers/soc/bcm/bcm63xx/Kconfig
-+++ b/drivers/soc/bcm/bcm63xx/Kconfig
-@@ -10,3 +10,12 @@ config BCM63XX_POWER
- 	  BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
- 
- endif # SOC_BCM63XX
-+
-+config BCM_PMB
-+	bool "Broadcom PMB (Power Management Bus) driver"
-+	depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
-+	default ARCH_BCM4908
-+	select PM_GENERIC_DOMAINS if PM
-+	help
-+	  This enables support for the Broadcom's PMB (Power Management Bus) that
-+	  is used for disabling and enabling SoC devices.
---- a/drivers/soc/bcm/bcm63xx/Makefile
-+++ b/drivers/soc/bcm/bcm63xx/Makefile
-@@ -1,2 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0-only
- obj-$(CONFIG_BCM63XX_POWER) += bcm63xx-power.o
-+obj-$(CONFIG_BCM_PMB)		+= bcm-pmb.o
---- /dev/null
-+++ b/drivers/soc/bcm/bcm63xx/bcm-pmb.c
-@@ -0,0 +1,333 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * Copyright (c) 2013 Broadcom
-+ * Copyright (C) 2020 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <dt-bindings/soc/bcm-pmb.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_domain.h>
-+#include <linux/reset/bcm63xx_pmb.h>
-+
-+#define BPCM_ID_REG					0x00
-+#define BPCM_CAPABILITIES				0x04
-+#define  BPCM_CAP_NUM_ZONES				0x000000ff
-+#define  BPCM_CAP_SR_REG_BITS				0x0000ff00
-+#define  BPCM_CAP_PLLTYPE				0x00030000
-+#define  BPCM_CAP_UBUS					0x00080000
-+#define BPCM_CONTROL					0x08
-+#define BPCM_STATUS					0x0c
-+#define BPCM_ROSC_CONTROL				0x10
-+#define BPCM_ROSC_THRESH_H				0x14
-+#define BPCM_ROSC_THRESHOLD_BCM6838			0x14
-+#define BPCM_ROSC_THRESH_S				0x18
-+#define BPCM_ROSC_COUNT_BCM6838				0x18
-+#define BPCM_ROSC_COUNT					0x1c
-+#define BPCM_PWD_CONTROL_BCM6838			0x1c
-+#define BPCM_PWD_CONTROL				0x20
-+#define BPCM_SR_CONTROL_BCM6838				0x20
-+#define BPCM_PWD_ACCUM_CONTROL				0x24
-+#define BPCM_SR_CONTROL					0x28
-+#define BPCM_GLOBAL_CONTROL				0x2c
-+#define BPCM_MISC_CONTROL				0x30
-+#define BPCM_MISC_CONTROL2				0x34
-+#define BPCM_SGPHY_CNTL					0x38
-+#define BPCM_SGPHY_STATUS				0x3c
-+#define BPCM_ZONE0					0x40
-+#define  BPCM_ZONE_CONTROL				0x00
-+#define   BPCM_ZONE_CONTROL_MANUAL_CLK_EN		0x00000001
-+#define   BPCM_ZONE_CONTROL_MANUAL_RESET_CTL		0x00000002
-+#define   BPCM_ZONE_CONTROL_FREQ_SCALE_USED		0x00000004	/* R/O */
-+#define   BPCM_ZONE_CONTROL_DPG_CAPABLE			0x00000008	/* R/O */
-+#define   BPCM_ZONE_CONTROL_MANUAL_MEM_PWR		0x00000030
-+#define   BPCM_ZONE_CONTROL_MANUAL_ISO_CTL		0x00000040
-+#define   BPCM_ZONE_CONTROL_MANUAL_CTL			0x00000080
-+#define   BPCM_ZONE_CONTROL_DPG_CTL_EN			0x00000100
-+#define   BPCM_ZONE_CONTROL_PWR_DN_REQ			0x00000200
-+#define   BPCM_ZONE_CONTROL_PWR_UP_REQ			0x00000400
-+#define   BPCM_ZONE_CONTROL_MEM_PWR_CTL_EN		0x00000800
-+#define   BPCM_ZONE_CONTROL_BLK_RESET_ASSERT		0x00001000
-+#define   BPCM_ZONE_CONTROL_MEM_STBY			0x00002000
-+#define   BPCM_ZONE_CONTROL_RESERVED			0x0007c000
-+#define   BPCM_ZONE_CONTROL_PWR_CNTL_STATE		0x00f80000
-+#define   BPCM_ZONE_CONTROL_FREQ_SCALAR_DYN_SEL		0x01000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_PWR_OFF_STATE		0x02000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_PWR_ON_STATE		0x04000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_PWR_GOOD			0x08000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_DPG_PWR_STATE		0x10000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_MEM_PWR_STATE		0x20000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_ISO_STATE			0x40000000	/* R/O */
-+#define   BPCM_ZONE_CONTROL_RESET_STATE			0x80000000	/* R/O */
-+#define  BPCM_ZONE_CONFIG1				0x04
-+#define  BPCM_ZONE_CONFIG2				0x08
-+#define  BPCM_ZONE_FREQ_SCALAR_CONTROL			0x0c
-+#define  BPCM_ZONE_SIZE					0x10
-+
-+struct bcm_pmb {
-+	struct device *dev;
-+	void __iomem *base;
-+	spinlock_t lock;
-+	bool little_endian;
-+	struct genpd_onecell_data genpd_onecell_data;
-+};
-+
-+struct bcm_pmb_pd_data {
-+	const char * const name;
-+	int id;
-+	u8 bus;
-+	u8 device;
-+};
-+
-+struct bcm_pmb_pm_domain {
-+	struct bcm_pmb *pmb;
-+	const struct bcm_pmb_pd_data *data;
-+	struct generic_pm_domain genpd;
-+};
-+
-+static int bcm_pmb_bpcm_read(struct bcm_pmb *pmb, int bus, u8 device,
-+			     int offset, u32 *val)
-+{
-+	void __iomem *base = pmb->base + bus * 0x20;
-+	unsigned long flags;
-+	int err;
-+
-+	spin_lock_irqsave(&pmb->lock, flags);
-+	err = bpcm_rd(base, device, offset, val);
-+	spin_unlock_irqrestore(&pmb->lock, flags);
-+
-+	if (!err)
-+		*val = pmb->little_endian ? le32_to_cpu(*val) : be32_to_cpu(*val);
-+
-+	return err;
-+}
-+
-+static int bcm_pmb_bpcm_write(struct bcm_pmb *pmb, int bus, u8 device,
-+			      int offset, u32 val)
-+{
-+	void __iomem *base = pmb->base + bus * 0x20;
-+	unsigned long flags;
-+	int err;
-+
-+	val = pmb->little_endian ? cpu_to_le32(val) : cpu_to_be32(val);
-+
-+	spin_lock_irqsave(&pmb->lock, flags);
-+	err = bpcm_wr(base, device, offset, val);
-+	spin_unlock_irqrestore(&pmb->lock, flags);
-+
-+	return err;
-+}
-+
-+static int bcm_pmb_power_off_zone(struct bcm_pmb *pmb, int bus, u8 device,
-+				  int zone)
-+{
-+	int offset;
-+	u32 val;
-+	int err;
-+
-+	offset = BPCM_ZONE0 + zone * BPCM_ZONE_SIZE + BPCM_ZONE_CONTROL;
-+
-+	err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val);
-+	if (err)
-+		return err;
-+
-+	val |= BPCM_ZONE_CONTROL_PWR_DN_REQ;
-+	val &= ~BPCM_ZONE_CONTROL_PWR_UP_REQ;
-+
-+	err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val);
-+
-+	return err;
-+}
-+
-+static int bcm_pmb_power_on_zone(struct bcm_pmb *pmb, int bus, u8 device,
-+				 int zone)
-+{
-+	int offset;
-+	u32 val;
-+	int err;
-+
-+	offset = BPCM_ZONE0 + zone * BPCM_ZONE_SIZE + BPCM_ZONE_CONTROL;
-+
-+	err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val);
-+	if (err)
-+		return err;
-+
-+	if (!(val & BPCM_ZONE_CONTROL_PWR_ON_STATE)) {
-+		val &= ~BPCM_ZONE_CONTROL_PWR_DN_REQ;
-+		val |= BPCM_ZONE_CONTROL_DPG_CTL_EN;
-+		val |= BPCM_ZONE_CONTROL_PWR_UP_REQ;
-+		val |= BPCM_ZONE_CONTROL_MEM_PWR_CTL_EN;
-+		val |= BPCM_ZONE_CONTROL_BLK_RESET_ASSERT;
-+
-+		err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val);
-+	}
-+
-+	return err;
-+}
-+
-+static int bcm_pmb_power_off_device(struct bcm_pmb *pmb, int bus, u8 device)
-+{
-+	int offset;
-+	u32 val;
-+	int err;
-+
-+	/* Entire device can be powered off by powering off the 0th zone */
-+	offset = BPCM_ZONE0 + BPCM_ZONE_CONTROL;
-+
-+	err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val);
-+	if (err)
-+		return err;
-+
-+	if (!(val & BPCM_ZONE_CONTROL_PWR_OFF_STATE)) {
-+		val = BPCM_ZONE_CONTROL_PWR_DN_REQ;
-+
-+		err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val);
-+	}
-+
-+	return err;
-+}
-+
-+static int bcm_pmb_power_on_device(struct bcm_pmb *pmb, int bus, u8 device)
-+{
-+	u32 val;
-+	int err;
-+	int i;
-+
-+	err = bcm_pmb_bpcm_read(pmb, bus, device, BPCM_CAPABILITIES, &val);
-+	if (err)
-+		return err;
-+
-+	for (i = 0; i < (val & BPCM_CAP_NUM_ZONES); i++) {
-+		err = bcm_pmb_power_on_zone(pmb, bus, device, i);
-+		if (err)
-+			return err;
-+	}
-+
-+	return err;
-+}
-+
-+static int bcm_pmb_power_on(struct generic_pm_domain *genpd)
-+{
-+	struct bcm_pmb_pm_domain *pd = container_of(genpd, struct bcm_pmb_pm_domain, genpd);
-+	const struct bcm_pmb_pd_data *data = pd->data;
-+	struct bcm_pmb *pmb = pd->pmb;
-+
-+	switch (data->id) {
-+	case BCM_PMB_PCIE0:
-+	case BCM_PMB_PCIE1:
-+	case BCM_PMB_PCIE2:
-+		return bcm_pmb_power_on_zone(pmb, data->bus, data->device, 0);
-+	case BCM_PMB_HOST_USB:
-+		return bcm_pmb_power_on_device(pmb, data->bus, data->device);
-+	default:
-+		dev_err(pmb->dev, "unsupported device id: %d\n", data->id);
-+		return -EINVAL;
-+	}
-+}
-+
-+static int bcm_pmb_power_off(struct generic_pm_domain *genpd)
-+{
-+	struct bcm_pmb_pm_domain *pd = container_of(genpd, struct bcm_pmb_pm_domain, genpd);
-+	const struct bcm_pmb_pd_data *data = pd->data;
-+	struct bcm_pmb *pmb = pd->pmb;
-+
-+	switch (data->id) {
-+	case BCM_PMB_PCIE0:
-+	case BCM_PMB_PCIE1:
-+	case BCM_PMB_PCIE2:
-+		return bcm_pmb_power_off_zone(pmb, data->bus, data->device, 0);
-+	case BCM_PMB_HOST_USB:
-+		return bcm_pmb_power_off_device(pmb, data->bus, data->device);
-+	default:
-+		dev_err(pmb->dev, "unsupported device id: %d\n", data->id);
-+		return -EINVAL;
-+	}
-+}
-+
-+static int bcm_pmb_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	const struct bcm_pmb_pd_data *table;
-+	const struct bcm_pmb_pd_data *e;
-+	struct resource *res;
-+	struct bcm_pmb *pmb;
-+	int max_id;
-+	int err;
-+
-+	pmb = devm_kzalloc(dev, sizeof(*pmb), GFP_KERNEL);
-+	if (!pmb)
-+		return -ENOMEM;
-+
-+	pmb->dev = dev;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	pmb->base = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(pmb->base))
-+		return PTR_ERR(pmb->base);
-+
-+	spin_lock_init(&pmb->lock);
-+
-+	pmb->little_endian = !of_device_is_big_endian(dev->of_node);
-+
-+	table = of_device_get_match_data(dev);
-+	if (!table)
-+		return -EINVAL;
-+
-+	max_id = 0;
-+	for (e = table; e->name; e++)
-+		max_id = max(max_id, e->id);
-+
-+	pmb->genpd_onecell_data.num_domains = max_id + 1;
-+	pmb->genpd_onecell_data.domains =
-+		devm_kcalloc(dev, pmb->genpd_onecell_data.num_domains,
-+			     sizeof(struct generic_pm_domain *), GFP_KERNEL);
-+	if (!pmb->genpd_onecell_data.domains)
-+		return -ENOMEM;
-+
-+	for (e = table; e->name; e++) {
-+		struct bcm_pmb_pm_domain *pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
-+
-+		pd->pmb = pmb;
-+		pd->data = e;
-+		pd->genpd.name = e->name;
-+		pd->genpd.power_on = bcm_pmb_power_on;
-+		pd->genpd.power_off = bcm_pmb_power_off;
-+
-+		pm_genpd_init(&pd->genpd, NULL, true);
-+		pmb->genpd_onecell_data.domains[e->id] = &pd->genpd;
-+	}
-+
-+	err = of_genpd_add_provider_onecell(dev->of_node, &pmb->genpd_onecell_data);
-+	if (err) {
-+		dev_err(dev, "failed to add genpd provider: %d\n", err);
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct bcm_pmb_pd_data bcm_pmb_bcm4908_data[] = {
-+	{ .name = "pcie2", .id = BCM_PMB_PCIE2, .bus = 0, .device = 2, },
-+	{ .name = "pcie0", .id = BCM_PMB_PCIE0, .bus = 1, .device = 14, },
-+	{ .name = "pcie1", .id = BCM_PMB_PCIE1, .bus = 1, .device = 15, },
-+	{ .name = "usb", .id = BCM_PMB_HOST_USB, .bus = 1, .device = 17, },
-+	{ },
-+};
-+
-+static const struct of_device_id bcm_pmb_of_match[] = {
-+	{ .compatible = "brcm,bcm4908-pmb", .data = &bcm_pmb_bcm4908_data, },
-+	{ },
-+};
-+
-+static struct platform_driver bcm_pmb_driver = {
-+	.driver = {
-+		.name = "bcm-pmb",
-+		.of_match_table = bcm_pmb_of_match,
-+	},
-+	.probe  = bcm_pmb_probe,
-+};
-+
-+builtin_platform_driver(bcm_pmb_driver);
diff --git a/target/linux/bcm4908/patches-5.10/082-v5.12-0003-soc-bcm-brcmstb-add-stubs-for-getting-platform-IDs.patch b/target/linux/bcm4908/patches-5.10/082-v5.12-0003-soc-bcm-brcmstb-add-stubs-for-getting-platform-IDs.patch
deleted file mode 100644
index aab65925b463..000000000000
--- a/target/linux/bcm4908/patches-5.10/082-v5.12-0003-soc-bcm-brcmstb-add-stubs-for-getting-platform-IDs.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 149ae80b1d50e7db5ac7df1cdf0820017b70e716 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 14 Jan 2021 11:53:18 +0100
-Subject: [PATCH] soc: bcm: brcmstb: add stubs for getting platform IDs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some brcmstb drivers may be shared with other SoC families. E.g. the
-same USB PHY block is shared by brcmstb and BCM4908.
-
-To avoid building brcmstb common code on non-brcmstb platforms we need
-stubs for:
-1. brcmstb_get_family_id()
-2. brcmstb_get_product_id()
-(to avoid "undefined reference to" errors).
-
-With this change PHY_BRCM_USB will not have to unconditionally select
-SOC_BRCMSTB anymore.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- include/linux/soc/brcmstb/brcmstb.h | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/include/linux/soc/brcmstb/brcmstb.h
-+++ b/include/linux/soc/brcmstb/brcmstb.h
-@@ -2,6 +2,8 @@
- #ifndef __BRCMSTB_SOC_H
- #define __BRCMSTB_SOC_H
- 
-+#include <linux/kconfig.h>
-+
- static inline u32 BRCM_ID(u32 reg)
- {
- 	return reg >> 28 ? reg >> 16 : reg >> 8;
-@@ -12,6 +14,8 @@ static inline u32 BRCM_REV(u32 reg)
- 	return reg & 0xff;
- }
- 
-+#if IS_ENABLED(CONFIG_SOC_BRCMSTB)
-+
- /*
-  * Helper functions for getting family or product id from the
-  * SoC driver.
-@@ -19,4 +23,16 @@ static inline u32 BRCM_REV(u32 reg)
- u32 brcmstb_get_family_id(void);
- u32 brcmstb_get_product_id(void);
- 
-+#else
-+static inline u32 brcmstb_get_family_id(void)
-+{
-+	return 0;
-+}
-+
-+static inline u32 brcmstb_get_product_id(void)
-+{
-+	return 0;
-+}
-+#endif
-+
- #endif /* __BRCMSTB_SOC_H */
diff --git a/target/linux/bcm4908/patches-5.10/085-v5.18-0001-dt-bindings-pinctrl-Add-binding-for-BCM4908-pinctrl.patch b/target/linux/bcm4908/patches-5.10/085-v5.18-0001-dt-bindings-pinctrl-Add-binding-for-BCM4908-pinctrl.patch
deleted file mode 100644
index 0dcc112edb3e..000000000000
--- a/target/linux/bcm4908/patches-5.10/085-v5.18-0001-dt-bindings-pinctrl-Add-binding-for-BCM4908-pinctrl.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From 7b5730f0ff24b0d7d1cb660a482384a807618a46 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 24 Jan 2022 11:22:42 +0100
-Subject: [PATCH] dt-bindings: pinctrl: Add binding for BCM4908 pinctrl
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's hardware block that is part of every SoC from BCM4908 family.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20220124102243.14912-1-zajec5@gmail.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- .../pinctrl/brcm,bcm4908-pinctrl.yaml         | 72 +++++++++++++++++++
- MAINTAINERS                                   |  7 ++
- 2 files changed, 79 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
-@@ -0,0 +1,72 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm4908-pinctrl.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom BCM4908 pin controller
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+description:
-+  Binding for pin controller present on BCM4908 family SoCs.
-+
-+properties:
-+  compatible:
-+    const: brcm,bcm4908-pinctrl
-+
-+  reg:
-+    maxItems: 1
-+
-+patternProperties:
-+  '-pins$':
-+    type: object
-+    $ref: pinmux-node.yaml#
-+
-+    properties:
-+      function:
-+        enum: [ led_0, led_1, led_2, led_3, led_4, led_5, led_6, led_7, led_8,
-+                led_9, led_10, led_11, led_12, led_13, led_14, led_15, led_16,
-+                led_17, led_18, led_19, led_20, led_21, led_22, led_23, led_24,
-+                led_25, led_26, led_27, led_28, led_29, led_30, led_31,
-+                hs_uart, i2c, i2s, nand_ctrl, nand_data, emmc_ctrl, usb0_pwr,
-+                usb1_pwr ]
-+
-+      groups:
-+        minItems: 1
-+        maxItems: 2
-+        items:
-+          enum: [ led_0_grp_a, led_1_grp_a, led_2_grp_a, led_3_grp_a,
-+                  led_4_grp_a, led_5_grp_a, led_6_grp_a, led_7_grp_a,
-+                  led_8_grp_a, led_9_grp_a, led_10_grp_a, led_10_grp_b,
-+                  led_11_grp_a, led_11_grp_b, led_12_grp_a, led_12_grp_b,
-+                  led_13_grp_a, led_13_grp_b, led_14_grp_a, led_15_grp_a,
-+                  led_16_grp_a, led_17_grp_a, led_18_grp_a, led_19_grp_a,
-+                  led_20_grp_a, led_21_grp_a, led_22_grp_a, led_23_grp_a,
-+                  led_24_grp_a, led_25_grp_a, led_26_grp_a, led_27_grp_a,
-+                  led_28_grp_a, led_29_grp_a, led_30_grp_a, led_31_grp_a,
-+                  led_31_grp_b, hs_uart_grp, i2c_grp_a, i2c_grp_b, i2s_grp,
-+                  nand_ctrl_grp, nand_data_grp, emmc_ctrl_grp, usb0_pwr_grp,
-+                  usb1_pwr_grp ]
-+
-+allOf:
-+  - $ref: pinctrl.yaml#
-+
-+required:
-+  - compatible
-+  - reg
-+
-+unevaluatedProperties: false
-+
-+examples:
-+  - |
-+    pinctrl@ff800560 {
-+        compatible = "brcm,bcm4908-pinctrl";
-+        reg = <0xff800560 0x10>;
-+
-+        led_0-a-pins {
-+            function = "led_0";
-+            groups = "led_0_grp_a";
-+        };
-+    };
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3436,6 +3436,13 @@ F:	Documentation/devicetree/bindings/net
- F:	drivers/net/ethernet/broadcom/bcm4908_enet.*
- F:	drivers/net/ethernet/broadcom/unimac.h
- 
-+BROADCOM BCM4908 PINMUX DRIVER
-+M:	Rafał Miłecki <rafal@milecki.pl>
-+M:	bcm-kernel-feedback-list@broadcom.com
-+L:	linux-gpio@vger.kernel.org
-+S:	Maintained
-+F:	Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
-+
- BROADCOM BCM5301X ARM ARCHITECTURE
- M:	Hauke Mehrtens <hauke@hauke-m.de>
- M:	Rafał Miłecki <zajec5@gmail.com>
diff --git a/target/linux/bcm4908/patches-5.10/085-v5.18-0002-pinctrl-bcm-add-driver-for-BCM4908-pinmux.patch b/target/linux/bcm4908/patches-5.10/085-v5.18-0002-pinctrl-bcm-add-driver-for-BCM4908-pinmux.patch
deleted file mode 100644
index bb2ae459e93c..000000000000
--- a/target/linux/bcm4908/patches-5.10/085-v5.18-0002-pinctrl-bcm-add-driver-for-BCM4908-pinmux.patch
+++ /dev/null
@@ -1,629 +0,0 @@
-From f7e322d99f1180270fb4a3e1ae992b3116cfcf34 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 24 Jan 2022 11:22:43 +0100
-Subject: [PATCH] pinctrl: bcm: add driver for BCM4908 pinmux
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has its own pins layout so it needs a custom binding and a Linux
-driver.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
-Link: https://lore.kernel.org/r/20220124102243.14912-2-zajec5@gmail.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- MAINTAINERS                           |   1 +
- drivers/pinctrl/bcm/Kconfig           |  14 +
- drivers/pinctrl/bcm/Makefile          |   1 +
- drivers/pinctrl/bcm/pinctrl-bcm4908.c | 563 ++++++++++++++++++++++++++
- 4 files changed, 579 insertions(+)
- create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm4908.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3442,6 +3442,7 @@ M:	bcm-kernel-feedback-list@broadcom.com
- L:	linux-gpio@vger.kernel.org
- S:	Maintained
- F:	Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
-+F:	drivers/pinctrl/bcm/pinctrl-bcm4908.c
- 
- BROADCOM BCM5301X ARM ARCHITECTURE
- M:	Hauke Mehrtens <hauke@hauke-m.de>
---- a/drivers/pinctrl/bcm/Kconfig
-+++ b/drivers/pinctrl/bcm/Kconfig
-@@ -29,6 +29,20 @@ config PINCTRL_BCM2835
- 	help
- 	   Say Y here to enable the Broadcom BCM2835 GPIO driver.
- 
-+config PINCTRL_BCM4908
-+	tristate "Broadcom BCM4908 pinmux driver"
-+	depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
-+	select PINMUX
-+	select PINCONF
-+	select GENERIC_PINCONF
-+	select GENERIC_PINCTRL_GROUPS
-+	select GENERIC_PINMUX_FUNCTIONS
-+	default ARCH_BCM4908
-+	help
-+	  Driver for BCM4908 family SoCs with integrated pin controller.
-+
-+	  If compiled as module it will be called pinctrl-bcm4908.
-+
- config PINCTRL_IPROC_GPIO
- 	bool "Broadcom iProc GPIO (with PINCONF) driver"
- 	depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
---- a/drivers/pinctrl/bcm/Makefile
-+++ b/drivers/pinctrl/bcm/Makefile
-@@ -3,6 +3,7 @@
- 
- obj-$(CONFIG_PINCTRL_BCM281XX)		+= pinctrl-bcm281xx.o
- obj-$(CONFIG_PINCTRL_BCM2835)		+= pinctrl-bcm2835.o
-+obj-$(CONFIG_PINCTRL_BCM4908)		+= pinctrl-bcm4908.o
- obj-$(CONFIG_PINCTRL_IPROC_GPIO)	+= pinctrl-iproc-gpio.o
- obj-$(CONFIG_PINCTRL_CYGNUS_MUX)	+= pinctrl-cygnus-mux.o
- obj-$(CONFIG_PINCTRL_NS)		+= pinctrl-ns.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm/pinctrl-bcm4908.c
-@@ -0,0 +1,560 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl> */
-+
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/string_helpers.h>
-+
-+#include "../core.h"
-+#include "../pinmux.h"
-+
-+#define BCM4908_NUM_PINS			86
-+
-+#define BCM4908_TEST_PORT_BLOCK_EN_LSB			0x00
-+#define BCM4908_TEST_PORT_BLOCK_DATA_MSB		0x04
-+#define BCM4908_TEST_PORT_BLOCK_DATA_LSB		0x08
-+#define  BCM4908_TEST_PORT_LSB_PINMUX_DATA_SHIFT	12
-+#define BCM4908_TEST_PORT_COMMAND			0x0c
-+#define  BCM4908_TEST_PORT_CMD_LOAD_MUX_REG		0x00000021
-+
-+struct bcm4908_pinctrl {
-+	struct device *dev;
-+	void __iomem *base;
-+	struct mutex mutex;
-+	struct pinctrl_dev *pctldev;
-+	struct pinctrl_desc pctldesc;
-+};
-+
-+/*
-+ * Groups
-+ */
-+
-+struct bcm4908_pinctrl_pin_setup {
-+	unsigned int number;
-+	unsigned int function;
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_0_pins_a[] = {
-+	{ 0, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_1_pins_a[] = {
-+	{ 1, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_2_pins_a[] = {
-+	{ 2, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_3_pins_a[] = {
-+	{ 3, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_4_pins_a[] = {
-+	{ 4, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_5_pins_a[] = {
-+	{ 5, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_6_pins_a[] = {
-+	{ 6, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_7_pins_a[] = {
-+	{ 7, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_8_pins_a[] = {
-+	{ 8, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_9_pins_a[] = {
-+	{ 9, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_10_pins_a[] = {
-+	{ 10, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_11_pins_a[] = {
-+	{ 11, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_12_pins_a[] = {
-+	{ 12, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_13_pins_a[] = {
-+	{ 13, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_14_pins_a[] = {
-+	{ 14, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_15_pins_a[] = {
-+	{ 15, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_16_pins_a[] = {
-+	{ 16, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_17_pins_a[] = {
-+	{ 17, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_18_pins_a[] = {
-+	{ 18, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_19_pins_a[] = {
-+	{ 19, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_20_pins_a[] = {
-+	{ 20, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_21_pins_a[] = {
-+	{ 21, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_22_pins_a[] = {
-+	{ 22, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_23_pins_a[] = {
-+	{ 23, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_24_pins_a[] = {
-+	{ 24, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_25_pins_a[] = {
-+	{ 25, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_26_pins_a[] = {
-+	{ 26, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_27_pins_a[] = {
-+	{ 27, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_28_pins_a[] = {
-+	{ 28, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_29_pins_a[] = {
-+	{ 29, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_30_pins_a[] = {
-+	{ 30, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_31_pins_a[] = {
-+	{ 31, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_10_pins_b[] = {
-+	{ 8, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_11_pins_b[] = {
-+	{ 9, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_12_pins_b[] = {
-+	{ 0, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_13_pins_b[] = {
-+	{ 1, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_31_pins_b[] = {
-+	{ 30, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup hs_uart_pins[] = {
-+	{ 10, 0 },	/* CTS */
-+	{ 11, 0 },	/* RTS */
-+	{ 12, 0 },	/* RXD */
-+	{ 13, 0 },	/* TXD */
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup i2c_pins_a[] = {
-+	{ 18, 0 },	/* SDA */
-+	{ 19, 0 },	/* SCL */
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup i2c_pins_b[] = {
-+	{ 22, 0 },	/* SDA */
-+	{ 23, 0 },	/* SCL */
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup i2s_pins[] = {
-+	{ 27, 0 },	/* MCLK */
-+	{ 28, 0 },	/* LRCK */
-+	{ 29, 0 },	/* SDATA */
-+	{ 30, 0 },	/* SCLK */
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup nand_ctrl_pins[] = {
-+	{ 32, 0 },
-+	{ 33, 0 },
-+	{ 34, 0 },
-+	{ 43, 0 },
-+	{ 44, 0 },
-+	{ 45, 0 },
-+	{ 56, 1 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup nand_data_pins[] = {
-+	{ 35, 0 },
-+	{ 36, 0 },
-+	{ 37, 0 },
-+	{ 38, 0 },
-+	{ 39, 0 },
-+	{ 40, 0 },
-+	{ 41, 0 },
-+	{ 42, 0 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup emmc_ctrl_pins[] = {
-+	{ 46, 0 },
-+	{ 47, 0 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup usb0_pwr_pins[] = {
-+	{ 63, 0 },
-+	{ 64, 0 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup usb1_pwr_pins[] = {
-+	{ 66, 0 },
-+	{ 67, 0 },
-+};
-+
-+struct bcm4908_pinctrl_grp {
-+	const char *name;
-+	const struct bcm4908_pinctrl_pin_setup *pins;
-+	const unsigned int num_pins;
-+};
-+
-+static const struct bcm4908_pinctrl_grp bcm4908_pinctrl_grps[] = {
-+	{ "led_0_grp_a", led_0_pins_a, ARRAY_SIZE(led_0_pins_a) },
-+	{ "led_1_grp_a", led_1_pins_a, ARRAY_SIZE(led_1_pins_a) },
-+	{ "led_2_grp_a", led_2_pins_a, ARRAY_SIZE(led_2_pins_a) },
-+	{ "led_3_grp_a", led_3_pins_a, ARRAY_SIZE(led_3_pins_a) },
-+	{ "led_4_grp_a", led_4_pins_a, ARRAY_SIZE(led_4_pins_a) },
-+	{ "led_5_grp_a", led_5_pins_a, ARRAY_SIZE(led_5_pins_a) },
-+	{ "led_6_grp_a", led_6_pins_a, ARRAY_SIZE(led_6_pins_a) },
-+	{ "led_7_grp_a", led_7_pins_a, ARRAY_SIZE(led_7_pins_a) },
-+	{ "led_8_grp_a", led_8_pins_a, ARRAY_SIZE(led_8_pins_a) },
-+	{ "led_9_grp_a", led_9_pins_a, ARRAY_SIZE(led_9_pins_a) },
-+	{ "led_10_grp_a", led_10_pins_a, ARRAY_SIZE(led_10_pins_a) },
-+	{ "led_11_grp_a", led_11_pins_a, ARRAY_SIZE(led_11_pins_a) },
-+	{ "led_12_grp_a", led_12_pins_a, ARRAY_SIZE(led_12_pins_a) },
-+	{ "led_13_grp_a", led_13_pins_a, ARRAY_SIZE(led_13_pins_a) },
-+	{ "led_14_grp_a", led_14_pins_a, ARRAY_SIZE(led_14_pins_a) },
-+	{ "led_15_grp_a", led_15_pins_a, ARRAY_SIZE(led_15_pins_a) },
-+	{ "led_16_grp_a", led_16_pins_a, ARRAY_SIZE(led_16_pins_a) },
-+	{ "led_17_grp_a", led_17_pins_a, ARRAY_SIZE(led_17_pins_a) },
-+	{ "led_18_grp_a", led_18_pins_a, ARRAY_SIZE(led_18_pins_a) },
-+	{ "led_19_grp_a", led_19_pins_a, ARRAY_SIZE(led_19_pins_a) },
-+	{ "led_20_grp_a", led_20_pins_a, ARRAY_SIZE(led_20_pins_a) },
-+	{ "led_21_grp_a", led_21_pins_a, ARRAY_SIZE(led_21_pins_a) },
-+	{ "led_22_grp_a", led_22_pins_a, ARRAY_SIZE(led_22_pins_a) },
-+	{ "led_23_grp_a", led_23_pins_a, ARRAY_SIZE(led_23_pins_a) },
-+	{ "led_24_grp_a", led_24_pins_a, ARRAY_SIZE(led_24_pins_a) },
-+	{ "led_25_grp_a", led_25_pins_a, ARRAY_SIZE(led_25_pins_a) },
-+	{ "led_26_grp_a", led_26_pins_a, ARRAY_SIZE(led_26_pins_a) },
-+	{ "led_27_grp_a", led_27_pins_a, ARRAY_SIZE(led_27_pins_a) },
-+	{ "led_28_grp_a", led_28_pins_a, ARRAY_SIZE(led_28_pins_a) },
-+	{ "led_29_grp_a", led_29_pins_a, ARRAY_SIZE(led_29_pins_a) },
-+	{ "led_30_grp_a", led_30_pins_a, ARRAY_SIZE(led_30_pins_a) },
-+	{ "led_31_grp_a", led_31_pins_a, ARRAY_SIZE(led_31_pins_a) },
-+	{ "led_10_grp_b", led_10_pins_b, ARRAY_SIZE(led_10_pins_b) },
-+	{ "led_11_grp_b", led_11_pins_b, ARRAY_SIZE(led_11_pins_b) },
-+	{ "led_12_grp_b", led_12_pins_b, ARRAY_SIZE(led_12_pins_b) },
-+	{ "led_13_grp_b", led_13_pins_b, ARRAY_SIZE(led_13_pins_b) },
-+	{ "led_31_grp_b", led_31_pins_b, ARRAY_SIZE(led_31_pins_b) },
-+	{ "hs_uart_grp", hs_uart_pins, ARRAY_SIZE(hs_uart_pins) },
-+	{ "i2c_grp_a", i2c_pins_a, ARRAY_SIZE(i2c_pins_a) },
-+	{ "i2c_grp_b", i2c_pins_b, ARRAY_SIZE(i2c_pins_b) },
-+	{ "i2s_grp", i2s_pins, ARRAY_SIZE(i2s_pins) },
-+	{ "nand_ctrl_grp", nand_ctrl_pins, ARRAY_SIZE(nand_ctrl_pins) },
-+	{ "nand_data_grp", nand_data_pins, ARRAY_SIZE(nand_data_pins) },
-+	{ "emmc_ctrl_grp", emmc_ctrl_pins, ARRAY_SIZE(emmc_ctrl_pins) },
-+	{ "usb0_pwr_grp", usb0_pwr_pins, ARRAY_SIZE(usb0_pwr_pins) },
-+	{ "usb1_pwr_grp", usb1_pwr_pins, ARRAY_SIZE(usb1_pwr_pins) },
-+};
-+
-+/*
-+ * Functions
-+ */
-+
-+struct bcm4908_pinctrl_function {
-+	const char *name;
-+	const char * const *groups;
-+	const unsigned int num_groups;
-+};
-+
-+static const char * const led_0_groups[] = { "led_0_grp_a" };
-+static const char * const led_1_groups[] = { "led_1_grp_a" };
-+static const char * const led_2_groups[] = { "led_2_grp_a" };
-+static const char * const led_3_groups[] = { "led_3_grp_a" };
-+static const char * const led_4_groups[] = { "led_4_grp_a" };
-+static const char * const led_5_groups[] = { "led_5_grp_a" };
-+static const char * const led_6_groups[] = { "led_6_grp_a" };
-+static const char * const led_7_groups[] = { "led_7_grp_a" };
-+static const char * const led_8_groups[] = { "led_8_grp_a" };
-+static const char * const led_9_groups[] = { "led_9_grp_a" };
-+static const char * const led_10_groups[] = { "led_10_grp_a", "led_10_grp_b" };
-+static const char * const led_11_groups[] = { "led_11_grp_a", "led_11_grp_b" };
-+static const char * const led_12_groups[] = { "led_12_grp_a", "led_12_grp_b" };
-+static const char * const led_13_groups[] = { "led_13_grp_a", "led_13_grp_b" };
-+static const char * const led_14_groups[] = { "led_14_grp_a" };
-+static const char * const led_15_groups[] = { "led_15_grp_a" };
-+static const char * const led_16_groups[] = { "led_16_grp_a" };
-+static const char * const led_17_groups[] = { "led_17_grp_a" };
-+static const char * const led_18_groups[] = { "led_18_grp_a" };
-+static const char * const led_19_groups[] = { "led_19_grp_a" };
-+static const char * const led_20_groups[] = { "led_20_grp_a" };
-+static const char * const led_21_groups[] = { "led_21_grp_a" };
-+static const char * const led_22_groups[] = { "led_22_grp_a" };
-+static const char * const led_23_groups[] = { "led_23_grp_a" };
-+static const char * const led_24_groups[] = { "led_24_grp_a" };
-+static const char * const led_25_groups[] = { "led_25_grp_a" };
-+static const char * const led_26_groups[] = { "led_26_grp_a" };
-+static const char * const led_27_groups[] = { "led_27_grp_a" };
-+static const char * const led_28_groups[] = { "led_28_grp_a" };
-+static const char * const led_29_groups[] = { "led_29_grp_a" };
-+static const char * const led_30_groups[] = { "led_30_grp_a" };
-+static const char * const led_31_groups[] = { "led_31_grp_a", "led_31_grp_b" };
-+static const char * const hs_uart_groups[] = { "hs_uart_grp" };
-+static const char * const i2c_groups[] = { "i2c_grp_a", "i2c_grp_b" };
-+static const char * const i2s_groups[] = { "i2s_grp" };
-+static const char * const nand_ctrl_groups[] = { "nand_ctrl_grp" };
-+static const char * const nand_data_groups[] = { "nand_data_grp" };
-+static const char * const emmc_ctrl_groups[] = { "emmc_ctrl_grp" };
-+static const char * const usb0_pwr_groups[] = { "usb0_pwr_grp" };
-+static const char * const usb1_pwr_groups[] = { "usb1_pwr_grp" };
-+
-+static const struct bcm4908_pinctrl_function bcm4908_pinctrl_functions[] = {
-+	{ "led_0", led_0_groups, ARRAY_SIZE(led_0_groups) },
-+	{ "led_1", led_1_groups, ARRAY_SIZE(led_1_groups) },
-+	{ "led_2", led_2_groups, ARRAY_SIZE(led_2_groups) },
-+	{ "led_3", led_3_groups, ARRAY_SIZE(led_3_groups) },
-+	{ "led_4", led_4_groups, ARRAY_SIZE(led_4_groups) },
-+	{ "led_5", led_5_groups, ARRAY_SIZE(led_5_groups) },
-+	{ "led_6", led_6_groups, ARRAY_SIZE(led_6_groups) },
-+	{ "led_7", led_7_groups, ARRAY_SIZE(led_7_groups) },
-+	{ "led_8", led_8_groups, ARRAY_SIZE(led_8_groups) },
-+	{ "led_9", led_9_groups, ARRAY_SIZE(led_9_groups) },
-+	{ "led_10", led_10_groups, ARRAY_SIZE(led_10_groups) },
-+	{ "led_11", led_11_groups, ARRAY_SIZE(led_11_groups) },
-+	{ "led_12", led_12_groups, ARRAY_SIZE(led_12_groups) },
-+	{ "led_13", led_13_groups, ARRAY_SIZE(led_13_groups) },
-+	{ "led_14", led_14_groups, ARRAY_SIZE(led_14_groups) },
-+	{ "led_15", led_15_groups, ARRAY_SIZE(led_15_groups) },
-+	{ "led_16", led_16_groups, ARRAY_SIZE(led_16_groups) },
-+	{ "led_17", led_17_groups, ARRAY_SIZE(led_17_groups) },
-+	{ "led_18", led_18_groups, ARRAY_SIZE(led_18_groups) },
-+	{ "led_19", led_19_groups, ARRAY_SIZE(led_19_groups) },
-+	{ "led_20", led_20_groups, ARRAY_SIZE(led_20_groups) },
-+	{ "led_21", led_21_groups, ARRAY_SIZE(led_21_groups) },
-+	{ "led_22", led_22_groups, ARRAY_SIZE(led_22_groups) },
-+	{ "led_23", led_23_groups, ARRAY_SIZE(led_23_groups) },
-+	{ "led_24", led_24_groups, ARRAY_SIZE(led_24_groups) },
-+	{ "led_25", led_25_groups, ARRAY_SIZE(led_25_groups) },
-+	{ "led_26", led_26_groups, ARRAY_SIZE(led_26_groups) },
-+	{ "led_27", led_27_groups, ARRAY_SIZE(led_27_groups) },
-+	{ "led_28", led_28_groups, ARRAY_SIZE(led_28_groups) },
-+	{ "led_29", led_29_groups, ARRAY_SIZE(led_29_groups) },
-+	{ "led_30", led_30_groups, ARRAY_SIZE(led_30_groups) },
-+	{ "led_31", led_31_groups, ARRAY_SIZE(led_31_groups) },
-+	{ "hs_uart", hs_uart_groups, ARRAY_SIZE(hs_uart_groups) },
-+	{ "i2c", i2c_groups, ARRAY_SIZE(i2c_groups) },
-+	{ "i2s", i2s_groups, ARRAY_SIZE(i2s_groups) },
-+	{ "nand_ctrl", nand_ctrl_groups, ARRAY_SIZE(nand_ctrl_groups) },
-+	{ "nand_data", nand_data_groups, ARRAY_SIZE(nand_data_groups) },
-+	{ "emmc_ctrl", emmc_ctrl_groups, ARRAY_SIZE(emmc_ctrl_groups) },
-+	{ "usb0_pwr", usb0_pwr_groups, ARRAY_SIZE(usb0_pwr_groups) },
-+	{ "usb1_pwr", usb1_pwr_groups, ARRAY_SIZE(usb1_pwr_groups) },
-+};
-+
-+/*
-+ * Groups code
-+ */
-+
-+static const struct pinctrl_ops bcm4908_pinctrl_ops = {
-+	.get_groups_count = pinctrl_generic_get_group_count,
-+	.get_group_name = pinctrl_generic_get_group_name,
-+	.get_group_pins = pinctrl_generic_get_group_pins,
-+	.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
-+	.dt_free_map = pinconf_generic_dt_free_map,
-+};
-+
-+/*
-+ * Functions code
-+ */
-+
-+static int bcm4908_pinctrl_set_mux(struct pinctrl_dev *pctrl_dev,
-+			      unsigned int func_selector,
-+			      unsigned int group_selector)
-+{
-+	struct bcm4908_pinctrl *bcm4908_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+	const struct bcm4908_pinctrl_grp *group;
-+	struct group_desc *group_desc;
-+	int i;
-+
-+	group_desc = pinctrl_generic_get_group(pctrl_dev, group_selector);
-+	if (!group_desc)
-+		return -EINVAL;
-+	group = group_desc->data;
-+
-+	mutex_lock(&bcm4908_pinctrl->mutex);
-+	for (i = 0; i < group->num_pins; i++) {
-+		u32 lsb = 0;
-+
-+		lsb |= group->pins[i].number;
-+		lsb |= group->pins[i].function << BCM4908_TEST_PORT_LSB_PINMUX_DATA_SHIFT;
-+
-+		writel(0x0, bcm4908_pinctrl->base + BCM4908_TEST_PORT_BLOCK_DATA_MSB);
-+		writel(lsb, bcm4908_pinctrl->base + BCM4908_TEST_PORT_BLOCK_DATA_LSB);
-+		writel(BCM4908_TEST_PORT_CMD_LOAD_MUX_REG,
-+		       bcm4908_pinctrl->base + BCM4908_TEST_PORT_COMMAND);
-+	}
-+	mutex_unlock(&bcm4908_pinctrl->mutex);
-+
-+	return 0;
-+}
-+
-+static const struct pinmux_ops bcm4908_pinctrl_pmxops = {
-+	.get_functions_count = pinmux_generic_get_function_count,
-+	.get_function_name = pinmux_generic_get_function_name,
-+	.get_function_groups = pinmux_generic_get_function_groups,
-+	.set_mux = bcm4908_pinctrl_set_mux,
-+};
-+
-+/*
-+ * Controller code
-+ */
-+
-+static struct pinctrl_desc bcm4908_pinctrl_desc = {
-+	.name = "bcm4908-pinctrl",
-+	.pctlops = &bcm4908_pinctrl_ops,
-+	.pmxops = &bcm4908_pinctrl_pmxops,
-+};
-+
-+static const struct of_device_id bcm4908_pinctrl_of_match_table[] = {
-+	{ .compatible = "brcm,bcm4908-pinctrl", },
-+	{ }
-+};
-+
-+static int bcm4908_pinctrl_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct bcm4908_pinctrl *bcm4908_pinctrl;
-+	struct pinctrl_desc *pctldesc;
-+	struct pinctrl_pin_desc *pins;
-+	int i;
-+
-+	bcm4908_pinctrl = devm_kzalloc(dev, sizeof(*bcm4908_pinctrl), GFP_KERNEL);
-+	if (!bcm4908_pinctrl)
-+		return -ENOMEM;
-+	pctldesc = &bcm4908_pinctrl->pctldesc;
-+	platform_set_drvdata(pdev, bcm4908_pinctrl);
-+
-+	/* Set basic properties */
-+
-+	bcm4908_pinctrl->dev = dev;
-+
-+	bcm4908_pinctrl->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(bcm4908_pinctrl->base))
-+		return PTR_ERR(bcm4908_pinctrl->base);
-+
-+	mutex_init(&bcm4908_pinctrl->mutex);
-+
-+	memcpy(pctldesc, &bcm4908_pinctrl_desc, sizeof(*pctldesc));
-+
-+	/* Set pinctrl properties */
-+
-+	pins = devm_kcalloc(dev, BCM4908_NUM_PINS, sizeof(*pins), GFP_KERNEL);
-+	if (!pins)
-+		return -ENOMEM;
-+	for (i = 0; i < BCM4908_NUM_PINS; i++) {
-+		pins[i].number = i;
-+		pins[i].name = devm_kasprintf(dev, GFP_KERNEL, "pin-%d", i);
-+		if (!pins[i].name)
-+			return -ENOMEM;
-+	}
-+	pctldesc->pins = pins;
-+	pctldesc->npins = BCM4908_NUM_PINS;
-+
-+	/* Register */
-+
-+	bcm4908_pinctrl->pctldev = devm_pinctrl_register(dev, pctldesc, bcm4908_pinctrl);
-+	if (IS_ERR(bcm4908_pinctrl->pctldev))
-+		return dev_err_probe(dev, PTR_ERR(bcm4908_pinctrl->pctldev),
-+				     "Failed to register pinctrl\n");
-+
-+	/* Groups */
-+
-+	for (i = 0; i < ARRAY_SIZE(bcm4908_pinctrl_grps); i++) {
-+		const struct bcm4908_pinctrl_grp *group = &bcm4908_pinctrl_grps[i];
-+		int *pins;
-+		int j;
-+
-+		pins = devm_kcalloc(dev, group->num_pins, sizeof(*pins), GFP_KERNEL);
-+		if (!pins)
-+			return -ENOMEM;
-+		for (j = 0; j < group->num_pins; j++)
-+			pins[j] = group->pins[j].number;
-+
-+		pinctrl_generic_add_group(bcm4908_pinctrl->pctldev, group->name,
-+					  pins, group->num_pins, (void *)group);
-+	}
-+
-+	/* Functions */
-+
-+	for (i = 0; i < ARRAY_SIZE(bcm4908_pinctrl_functions); i++) {
-+		const struct bcm4908_pinctrl_function *function = &bcm4908_pinctrl_functions[i];
-+
-+		pinmux_generic_add_function(bcm4908_pinctrl->pctldev,
-+					    function->name,
-+					    function->groups,
-+					    function->num_groups, NULL);
-+	}
-+
-+	return 0;
-+}
-+
-+static struct platform_driver bcm4908_pinctrl_driver = {
-+	.probe = bcm4908_pinctrl_probe,
-+	.driver = {
-+		.name = "bcm4908-pinctrl",
-+		.of_match_table = bcm4908_pinctrl_of_match_table,
-+	},
-+};
-+
-+module_platform_driver(bcm4908_pinctrl_driver);
-+
-+MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_LICENSE("GPL v2");
-+MODULE_DEVICE_TABLE(of, bcm4908_pinctrl_of_match_table);
diff --git a/target/linux/bcm4908/patches-5.10/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch b/target/linux/bcm4908/patches-5.10/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch
deleted file mode 100644
index ec9b1fea3d13..000000000000
--- a/target/linux/bcm4908/patches-5.10/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From d14f4cce9340a6586512a0eb6bc680dedeaaef14 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 16 Dec 2020 15:33:04 +0100
-Subject: [PATCH] phy: phy-brcm-usb: improve getting OF matching data
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Use of_device_get_match_data() helper to simplify the code
-2. Check for NULL as a good practice
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20201216143305.12179-1-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/broadcom/phy-brcm-usb.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -11,6 +11,7 @@
- #include <linux/io.h>
- #include <linux/module.h>
- #include <linux/of.h>
-+#include <linux/of_device.h>
- #include <linux/phy/phy.h>
- #include <linux/platform_device.h>
- #include <linux/interrupt.h>
-@@ -457,7 +458,6 @@ static int brcm_usb_phy_probe(struct pla
- 	struct device_node *dn = pdev->dev.of_node;
- 	int err;
- 	const char *mode;
--	const struct of_device_id *match;
- 	void (*dvr_init)(struct brcm_usb_init_params *params);
- 	const struct match_chip_info *info;
- 	struct regmap *rmap;
-@@ -471,8 +471,9 @@ static int brcm_usb_phy_probe(struct pla
- 	priv->ini.family_id = brcmstb_get_family_id();
- 	priv->ini.product_id = brcmstb_get_product_id();
- 
--	match = of_match_node(brcm_usb_dt_ids, dev->of_node);
--	info = match->data;
-+	info = of_device_get_match_data(&pdev->dev);
-+	if (!info)
-+		return -ENOENT;
- 	dvr_init = info->init_func;
- 	(*dvr_init)(&priv->ini);
- 
diff --git a/target/linux/bcm4908/patches-5.10/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch b/target/linux/bcm4908/patches-5.10/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch
deleted file mode 100644
index ffb064f95fd5..000000000000
--- a/target/linux/bcm4908/patches-5.10/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 915f1d230e5292bc2156a9997bcb19d9e632f10b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 16 Dec 2020 15:33:05 +0100
-Subject: [PATCH] phy: phy-brcm-usb: specify init function format at struct
- level
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is slightly cleaner solution that assures noone assings a wrong
-function to the pointer.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20201216143305.12179-2-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/broadcom/phy-brcm-usb.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -36,7 +36,7 @@ struct value_to_name_map {
- };
- 
- struct match_chip_info {
--	void *init_func;
-+	void (*init_func)(struct brcm_usb_init_params *params);
- 	u8 required_regs[BRCM_REGS_MAX + 1];
- 	u8 optional_reg;
- };
-@@ -458,7 +458,6 @@ static int brcm_usb_phy_probe(struct pla
- 	struct device_node *dn = pdev->dev.of_node;
- 	int err;
- 	const char *mode;
--	void (*dvr_init)(struct brcm_usb_init_params *params);
- 	const struct match_chip_info *info;
- 	struct regmap *rmap;
- 	int x;
-@@ -474,8 +473,8 @@ static int brcm_usb_phy_probe(struct pla
- 	info = of_device_get_match_data(&pdev->dev);
- 	if (!info)
- 		return -ENOENT;
--	dvr_init = info->init_func;
--	(*dvr_init)(&priv->ini);
-+
-+	info->init_func(&priv->ini);
- 
- 	dev_dbg(dev, "Best mapping table is for %s\n",
- 		priv->ini.family_name);
diff --git a/target/linux/bcm4908/patches-5.10/086-v5.12-0003-dt-bindings-phy-brcm-brcmstb-usb-phy-convert-to-the-.patch b/target/linux/bcm4908/patches-5.10/086-v5.12-0003-dt-bindings-phy-brcm-brcmstb-usb-phy-convert-to-the-.patch
deleted file mode 100644
index 1edd63ea5d8b..000000000000
--- a/target/linux/bcm4908/patches-5.10/086-v5.12-0003-dt-bindings-phy-brcm-brcmstb-usb-phy-convert-to-the-.patch
+++ /dev/null
@@ -1,315 +0,0 @@
-From b39069a482ade0c5e18c407c3218ba1aeed371b6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 6 Jan 2021 21:58:36 +0100
-Subject: [PATCH] dt-bindings: phy: brcm, brcmstb-usb-phy: convert to the
- json-schema
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Changes that require mentioning:
-1. interrupt-names
-   Name "wakeup" was changed to the "wake". It matches example and what
-   Linux driver looks for in the first place
-2. brcm,ipp and brcm,ioc
-   Both were described as booleans with 0 / 1 values. In examples they
-   were integers and Linux checks for int as well. Both got uint32.
-3. Added minimal description
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20210106205838.10964-1-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- .../bindings/phy/brcm,brcmstb-usb-phy.txt     |  86 --------
- .../bindings/phy/brcm,brcmstb-usb-phy.yaml    | 193 ++++++++++++++++++
- 2 files changed, 193 insertions(+), 86 deletions(-)
- delete mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
- create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
-
---- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
-+++ /dev/null
-@@ -1,86 +0,0 @@
--Broadcom STB USB PHY
--
--Required properties:
--- compatible: should be one of
--	"brcm,brcmstb-usb-phy"
--	"brcm,bcm7216-usb-phy"
--	"brcm,bcm7211-usb-phy"
--
--- reg and reg-names properties requirements are specific to the
--  compatible string.
--  "brcm,brcmstb-usb-phy":
--    - reg: 1 or 2 offset and length pairs. One for the base CTRL registers
--           and an optional pair for systems with USB 3.x support
--    - reg-names: not specified
--  "brcm,bcm7216-usb-phy":
--    - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL
--           registers
--    - reg-names: "ctrl", "xhci_ec", "xhci_gbl"
--  "brcm,bcm7211-usb-phy":
--    - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL,
--           USB_PHY and USB_MDIO registers and an optional pair
--	   for the BDC registers
--    - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
--
--- #phy-cells: Shall be 1 as it expects one argument for setting
--	      the type of the PHY. Possible values are:
--	      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
--	      - PHY_TYPE_USB3 for USB3.x PHY
--
--Optional Properties:
--- clocks : clock phandles.
--- clock-names: String, clock name.
--- interrupts: wakeup interrupt
--- interrupt-names: "wakeup"
--- brcm,ipp: Boolean, Invert Port Power.
--  Possible values are: 0 (Don't invert), 1 (Invert)
--- brcm,ioc: Boolean, Invert Over Current detection.
--  Possible values are: 0 (Don't invert), 1 (Invert)
--- dr_mode: String, PHY Device mode.
--  Possible values are: "host", "peripheral ", "drd" or "typec-pd"
--  If this property is not defined, the phy will default to "host" mode.
--- brcm,syscon-piarbctl: phandle to syscon for handling config registers
--NOTE: one or both of the following two properties must be set
--- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
--- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
--
--
--Example:
--
--usbphy_0: usb-phy@f0470200 {
--	reg = <0xf0470200 0xb8>,
--		<0xf0471940 0x6c0>;
--	compatible = "brcm,brcmstb-usb-phy";
--	#phy-cells = <1>;
--	dr_mode = "host"
--	brcm,ioc = <1>;
--	brcm,ipp = <1>;
--	brcm,has-xhci;
--	brcm,has-eohci;
--	clocks = <&usb20>, <&usb30>;
--	clock-names = "sw_usb", "sw_usb3";
--};
--
--usb-phy@29f0200 {
--	reg = <0x29f0200 0x200>,
--		<0x29c0880 0x30>,
--		<0x29cc100 0x534>,
--		<0x2808000 0x24>,
--		<0x2980080 0x8>;
--	reg-names = "ctrl",
--		"xhci_ec",
--		"xhci_gbl",
--		"usb_phy",
--		"usb_mdio";
--	brcm,ioc = <0x0>;
--	brcm,ipp = <0x0>;
--	compatible = "brcm,bcm7211-usb-phy";
--	interrupts = <0x30>;
--	interrupt-parent = <&vpu_intr1_nosec_intc>;
--	interrupt-names = "wake";
--	#phy-cells = <0x1>;
--	brcm,has-xhci;
--	syscon-piarbctl = <&syscon_piarbctl>;
--	clocks = <&scmi_clk 256>;
--	clock-names = "sw_usb";
--};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
-@@ -0,0 +1,193 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/phy/brcm,brcmstb-usb-phy.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom STB USB PHY
-+
-+description: Broadcom's PHY that handles EHCI/OHCI and/or XHCI
-+
-+maintainers:
-+  - Al Cooper <alcooperx@gmail.com>
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    enum:
-+      - brcm,bcm7211-usb-phy
-+      - brcm,bcm7216-usb-phy
-+      - brcm,brcmstb-usb-phy
-+
-+  reg:
-+    minItems: 1
-+    maxItems: 6
-+    items:
-+      - description: the base CTRL register
-+      - description: XHCI EC register
-+      - description: XHCI GBL register
-+      - description: USB PHY register
-+      - description: USB MDIO register
-+      - description: BDC register
-+
-+  reg-names:
-+    minItems: 1
-+    maxItems: 6
-+    items:
-+      - const: ctrl
-+      - const: xhci_ec
-+      - const: xhci_gbl
-+      - const: usb_phy
-+      - const: usb_mdio
-+      - const: bdc_ec
-+
-+  clocks:
-+    minItems: 1
-+    maxItems: 2
-+
-+  clock-names:
-+    minItems: 1
-+    maxItems: 2
-+    items:
-+      - const: sw_usb
-+      - const: sw_usb3
-+
-+  interrupts:
-+    description: wakeup interrupt
-+
-+  interrupt-names:
-+    const: wake
-+
-+  brcm,ipp:
-+    $ref: /schemas/types.yaml#/definitions/uint32
-+    description: Invert Port Power
-+    minimum: 0
-+    maximum: 1
-+
-+  brcm,ioc:
-+    $ref: /schemas/types.yaml#/definitions/uint32
-+    description: Invert Over Current detection
-+    minimum: 0
-+    maximum: 1
-+
-+  dr_mode:
-+    description: PHY Device mode. If this property is not defined, the PHY will
-+      default to "host" mode.
-+    enum:
-+      - host
-+      - peripheral
-+      - drd
-+      - typec-pd
-+
-+  brcm,syscon-piarbctl:
-+    description: phandle to syscon for handling config registers
-+    $ref: /schemas/types.yaml#/definitions/phandle
-+
-+  brcm,has-xhci:
-+    description: Indicates the PHY has an XHCI PHY.
-+    type: boolean
-+
-+  brcm,has-eohci:
-+    description: Indicates the PHY has an EHCI/OHCI PHY.
-+    type: boolean
-+
-+  "#phy-cells":
-+    description: |
-+      Cell allows setting the type of the PHY. Possible values are:
-+      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
-+      - PHY_TYPE_USB3 for USB3.x PHY
-+    const: 1
-+
-+required:
-+  - reg
-+  - "#phy-cells"
-+
-+anyOf:
-+  - required:
-+      - brcm,has-xhci
-+  - required:
-+      - brcm,has-eohci
-+
-+allOf:
-+  - if:
-+      properties:
-+        compatible:
-+          contains:
-+            const: brcm,brcmstb-usb-phy
-+    then:
-+      properties:
-+        reg:
-+          minItems: 1
-+          maxItems: 2
-+  - if:
-+      properties:
-+        compatible:
-+          contains:
-+            const: brcm,bcm7211-usb-phy
-+    then:
-+      properties:
-+        reg:
-+          minItems: 5
-+          maxItems: 6
-+        reg-names:
-+          minItems: 5
-+          maxItems: 6
-+  - if:
-+      properties:
-+        compatible:
-+          contains:
-+            const: brcm,bcm7216-usb-phy
-+    then:
-+      properties:
-+        reg:
-+          minItems: 3
-+          maxItems: 3
-+        reg-names:
-+          minItems: 3
-+          maxItems: 3
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/phy/phy.h>
-+
-+    usb-phy@f0470200 {
-+        compatible = "brcm,brcmstb-usb-phy";
-+        reg = <0xf0470200 0xb8>,
-+              <0xf0471940 0x6c0>;
-+        #phy-cells = <1>;
-+        dr_mode = "host";
-+        brcm,ioc = <1>;
-+        brcm,ipp = <1>;
-+        brcm,has-xhci;
-+        brcm,has-eohci;
-+        clocks = <&usb20>, <&usb30>;
-+        clock-names = "sw_usb", "sw_usb3";
-+    };
-+  - |
-+    #include <dt-bindings/phy/phy.h>
-+
-+    usb-phy@29f0200 {
-+        compatible = "brcm,bcm7211-usb-phy";
-+        reg = <0x29f0200 0x200>,
-+              <0x29c0880 0x30>,
-+              <0x29cc100 0x534>,
-+              <0x2808000 0x24>,
-+              <0x2980080 0x8>;
-+        reg-names = "ctrl",
-+            "xhci_ec",
-+            "xhci_gbl",
-+            "usb_phy",
-+            "usb_mdio";
-+        brcm,ioc = <0x0>;
-+        brcm,ipp = <0x0>;
-+        interrupts = <0x30>;
-+        interrupt-parent = <&vpu_intr1_nosec_intc>;
-+        interrupt-names = "wake";
-+        #phy-cells = <0x1>;
-+        brcm,has-xhci;
-+        brcm,syscon-piarbctl = <&syscon_piarbctl>;
-+        clocks = <&scmi_clk 256>;
-+        clock-names = "sw_usb";
-+    };
diff --git a/target/linux/bcm4908/patches-5.10/086-v5.12-0004-dt-bindings-phy-brcm-brcmstb-usb-phy-add-BCM4908-bin.patch b/target/linux/bcm4908/patches-5.10/086-v5.12-0004-dt-bindings-phy-brcm-brcmstb-usb-phy-add-BCM4908-bin.patch
deleted file mode 100644
index 6127800a4345..000000000000
--- a/target/linux/bcm4908/patches-5.10/086-v5.12-0004-dt-bindings-phy-brcm-brcmstb-usb-phy-add-BCM4908-bin.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 46b616c1574def7a1629bdeded3d44e76382f950 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 6 Jan 2021 21:58:37 +0100
-Subject: [PATCH] dt-bindings: phy: brcm, brcmstb-usb-phy: add BCM4908 binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 uses the same PHY and may require just a slightly different
-programming.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20210106205838.10964-2-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- .../devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml        | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
-+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
-@@ -15,6 +15,7 @@ maintainers:
- properties:
-   compatible:
-     enum:
-+      - brcm,bcm4908-usb-phy
-       - brcm,bcm7211-usb-phy
-       - brcm,bcm7216-usb-phy
-       - brcm,brcmstb-usb-phy
-@@ -113,7 +114,9 @@ allOf:
-       properties:
-         compatible:
-           contains:
--            const: brcm,brcmstb-usb-phy
-+            enum:
-+              - const: brcm,bcm4908-usb-phy
-+              - const: brcm,brcmstb-usb-phy
-     then:
-       properties:
-         reg:
diff --git a/target/linux/bcm4908/patches-5.10/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch b/target/linux/bcm4908/patches-5.10/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch
deleted file mode 100644
index 362738c80255..000000000000
--- a/target/linux/bcm4908/patches-5.10/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 4b402fa8e0b7817f3e3738d7828038f114e6899e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 6 Jan 2021 21:58:38 +0100
-Subject: [PATCH] phy: phy-brcm-usb: support PHY on the BCM4908
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 seems to have slightly different registers but works when
-programmed just like the STB one.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210106205838.10964-3-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/broadcom/Kconfig        | 3 ++-
- drivers/phy/broadcom/phy-brcm-usb.c | 4 ++++
- 2 files changed, 6 insertions(+), 1 deletion(-)
-
---- a/drivers/phy/broadcom/Kconfig
-+++ b/drivers/phy/broadcom/Kconfig
-@@ -91,10 +91,11 @@ config PHY_BRCM_SATA
- 
- config PHY_BRCM_USB
- 	tristate "Broadcom STB USB PHY driver"
--	depends on ARCH_BRCMSTB || COMPILE_TEST
-+	depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
- 	depends on OF
- 	select GENERIC_PHY
- 	select SOC_BRCMSTB
-+	default ARCH_BCM4908
- 	default ARCH_BRCMSTB
- 	help
- 	  Enable this to support the Broadcom STB USB PHY.
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -317,6 +317,10 @@ static const struct match_chip_info chip
- 
- static const struct of_device_id brcm_usb_dt_ids[] = {
- 	{
-+		.compatible = "brcm,bcm4908-usb-phy",
-+		.data = &chip_info_7445,
-+	},
-+	{
- 		.compatible = "brcm,bcm7216-usb-phy",
- 		.data = &chip_info_7216,
- 	},
diff --git a/target/linux/bcm4908/patches-5.10/086-v5.13-0001-phy-phy-brcm-usb-select-SOC_BRCMSTB-on-brcmstb-only.patch b/target/linux/bcm4908/patches-5.10/086-v5.13-0001-phy-phy-brcm-usb-select-SOC_BRCMSTB-on-brcmstb-only.patch
deleted file mode 100644
index 89ee4df78c32..000000000000
--- a/target/linux/bcm4908/patches-5.10/086-v5.13-0001-phy-phy-brcm-usb-select-SOC_BRCMSTB-on-brcmstb-only.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 261ab1fd5c5d2d7ff7d5bab3f5db3c69c4bcea58 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Mar 2021 16:24:06 +0100
-Subject: [PATCH] phy: phy-brcm-usb: select SOC_BRCMSTB on brcmstb only
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-phy-brcm-usb has some conditional init code required on selected brcmstb
-devices. Execution of that code depends on family / product detected by
-brcmstb soc code.
-
-For ARCH_BCM4908 brcmstb soc code always return 0 values as ids. Don't
-bother selecting & compiling that redundant driver.
-
-Depends-on: 149ae80b1d50 ("soc: bcm: brcmstb: add stubs for getting platform IDs")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210305152406.2588-1-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/broadcom/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/phy/broadcom/Kconfig
-+++ b/drivers/phy/broadcom/Kconfig
-@@ -94,7 +94,7 @@ config PHY_BRCM_USB
- 	depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
- 	depends on OF
- 	select GENERIC_PHY
--	select SOC_BRCMSTB
-+	select SOC_BRCMSTB if ARCH_BRCMSTB
- 	default ARCH_BCM4908
- 	default ARCH_BRCMSTB
- 	help
diff --git a/target/linux/bcm4908/patches-5.10/086-v5.13-0002-dt-bindings-phy-brcm-brcmstb-usb-phy-add-power-domai.patch b/target/linux/bcm4908/patches-5.10/086-v5.13-0002-dt-bindings-phy-brcm-brcmstb-usb-phy-add-power-domai.patch
deleted file mode 100644
index 4db442c0aef5..000000000000
--- a/target/linux/bcm4908/patches-5.10/086-v5.13-0002-dt-bindings-phy-brcm-brcmstb-usb-phy-add-power-domai.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From d9de0cbd5b1f6b51c92a40937945f26a35d848ff Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 9 Mar 2021 19:26:16 +0100
-Subject: [PATCH] dt-bindings: phy: brcm,brcmstb-usb-phy: add power-domains
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On BCM4908 USB PHY is managed using power controller so it needs
-describing properly using the power-domains.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20210309182616.25783-1-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- .../devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml          | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
-+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
-@@ -42,6 +42,9 @@ properties:
-       - const: usb_mdio
-       - const: bdc_ec
- 
-+  power-domains:
-+    maxItems: 1
-+
-   clocks:
-     minItems: 1
-     maxItems: 2
diff --git a/target/linux/bcm4908/patches-5.10/087-v5.18-0001-i2c-brcmstb-allow-compiling-on-BCM4908.patch b/target/linux/bcm4908/patches-5.10/087-v5.18-0001-i2c-brcmstb-allow-compiling-on-BCM4908.patch
deleted file mode 100644
index 246f2494131c..000000000000
--- a/target/linux/bcm4908/patches-5.10/087-v5.18-0001-i2c-brcmstb-allow-compiling-on-BCM4908.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From d0aee048d648ec2d9aa7af43b127ebf847d497d5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 11 Feb 2022 11:58:06 +0100
-Subject: [PATCH] i2c: brcmstb: allow compiling on BCM4908
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 SoCs use the same I2C hardware block as STB and BCM63xx devices.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Wolfram Sang <wsa@kernel.org>
----
- drivers/i2c/busses/Kconfig | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -477,8 +477,8 @@ config I2C_BCM_KONA
- 
- config I2C_BRCMSTB
- 	tristate "BRCM Settop/DSL I2C controller"
--	depends on ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC || \
--		   ARCH_BCM_63XX || COMPILE_TEST
-+	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCM_63XX || \
-+		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
- 	default y
- 	help
- 	  If you say yes to this option, support will be included for the
diff --git a/target/linux/bcm4908/patches-5.10/088-v5.18-phy-phy-brcm-usb-fixup-BCM4908-support.patch b/target/linux/bcm4908/patches-5.10/088-v5.18-phy-phy-brcm-usb-fixup-BCM4908-support.patch
deleted file mode 100644
index 4d39f646e13e..000000000000
--- a/target/linux/bcm4908/patches-5.10/088-v5.18-phy-phy-brcm-usb-fixup-BCM4908-support.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-From 32942d33d63d27714ed16a4176e5a99547adb6e0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 18 Feb 2022 18:24:59 +0100
-Subject: [PATCH] phy: phy-brcm-usb: fixup BCM4908 support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Just like every other family BCM4908 should get its own enum value. That
-is required to properly handle it in chipset conditional code.
-
-The real change is excluding BCM4908 from the PLL reprogramming code
-(see brcmusb_usb3_pll_54mhz()). I'm not sure what's the BCM4908
-reference clock frequency but:
-1. BCM4908 custom driver from Broadcom's SDK doesn't reprogram PLL
-2. Doing that in Linux driver stopped PHY handling some USB 3.0 devices
-
-This change makes USB 3.0 PHY recognize e.g.:
-1. 04e8:6860 - Samsung Electronics Co., Ltd Galaxy series, misc. (MTP mode)
-2. 1058:259f - Western Digital My Passport 259F
-
-Broadcom's STB SoCs come with a set of SUN_TOP_CTRL_* registers that
-allow reading chip family and product ids. Such a block & register is
-missing on BCM4908 so this commit introduces "compatible" string
-specific binding.
-
-Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20220218172459.10431-1-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/broadcom/phy-brcm-usb-init.c | 36 ++++++++++++++++++++++++
- drivers/phy/broadcom/phy-brcm-usb-init.h |  1 +
- drivers/phy/broadcom/phy-brcm-usb.c      | 11 +++++++-
- 3 files changed, 47 insertions(+), 1 deletion(-)
-
---- a/drivers/phy/broadcom/phy-brcm-usb-init.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
-@@ -79,6 +79,7 @@
- 
- enum brcm_family_type {
- 	BRCM_FAMILY_3390A0,
-+	BRCM_FAMILY_4908,
- 	BRCM_FAMILY_7250B0,
- 	BRCM_FAMILY_7271A0,
- 	BRCM_FAMILY_7364A0,
-@@ -96,6 +97,7 @@ enum brcm_family_type {
- 
- static const char *family_names[BRCM_FAMILY_COUNT] = {
- 	USB_BRCM_FAMILY(3390A0),
-+	USB_BRCM_FAMILY(4908),
- 	USB_BRCM_FAMILY(7250B0),
- 	USB_BRCM_FAMILY(7271A0),
- 	USB_BRCM_FAMILY(7364A0),
-@@ -203,6 +205,27 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT
- 		USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
- 		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
- 	},
-+	/* 4908 */
-+	[BRCM_FAMILY_4908] = {
-+		0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
-+		0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
-+		0, /* USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */
-+		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
-+		0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */
-+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
-+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
-+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
-+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
-+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
-+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
-+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
-+		0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
-+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
-+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
-+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
-+		0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK */
-+		0, /* USB_CTRL_SETUP ENDIAN bits */
-+	},
- 	/* 7250b0 */
- 	[BRCM_FAMILY_7250B0] = {
- 		USB_CTRL_SETUP_SCB1_EN_MASK,
-@@ -559,6 +582,7 @@ static void brcmusb_usb3_pll_54mhz(struc
- 	 */
- 	switch (params->selected_family) {
- 	case BRCM_FAMILY_3390A0:
-+	case BRCM_FAMILY_4908:
- 	case BRCM_FAMILY_7250B0:
- 	case BRCM_FAMILY_7366C0:
- 	case BRCM_FAMILY_74371A0:
-@@ -1004,6 +1028,18 @@ static const struct brcm_usb_init_ops bc
- 	.set_dual_select = usb_set_dual_select,
- };
- 
-+void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params)
-+{
-+	int fam;
-+
-+	fam = BRCM_FAMILY_4908;
-+	params->selected_family = fam;
-+	params->usb_reg_bits_map =
-+		&usb_reg_bits_map_table[fam][0];
-+	params->family_name = family_names[fam];
-+	params->ops = &bcm7445_ops;
-+}
-+
- void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params)
- {
- 	int fam;
---- a/drivers/phy/broadcom/phy-brcm-usb-init.h
-+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
-@@ -64,6 +64,7 @@ struct  brcm_usb_init_params {
- 	bool suspend_with_clocks;
- };
- 
-+void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params);
- void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params);
- void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params);
- void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params);
---- a/drivers/phy/broadcom/phy-brcm-usb.c
-+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -283,6 +283,15 @@ static const struct attribute_group brcm
- 	.attrs = brcm_usb_phy_attrs,
- };
- 
-+static const struct match_chip_info chip_info_4908 = {
-+	.init_func = &brcm_usb_dvr_init_4908,
-+	.required_regs = {
-+		BRCM_REGS_CTRL,
-+		BRCM_REGS_XHCI_EC,
-+		-1,
-+	},
-+};
-+
- static const struct match_chip_info chip_info_7216 = {
- 	.init_func = &brcm_usb_dvr_init_7216,
- 	.required_regs = {
-@@ -318,7 +327,7 @@ static const struct match_chip_info chip
- static const struct of_device_id brcm_usb_dt_ids[] = {
- 	{
- 		.compatible = "brcm,bcm4908-usb-phy",
--		.data = &chip_info_7445,
-+		.data = &chip_info_4908,
- 	},
- 	{
- 		.compatible = "brcm,bcm7216-usb-phy",
diff --git a/target/linux/bcm4908/patches-5.10/089-v5.18-watchdog-allow-building-BCM7038_WDT-for-BCM4908.patch b/target/linux/bcm4908/patches-5.10/089-v5.18-watchdog-allow-building-BCM7038_WDT-for-BCM4908.patch
deleted file mode 100644
index ea75181a6edb..000000000000
--- a/target/linux/bcm4908/patches-5.10/089-v5.18-watchdog-allow-building-BCM7038_WDT-for-BCM4908.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From cd91fb2776967b2b2dea27307a3f23ba3d9bbb32 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 9 Feb 2022 21:32:02 +0100
-Subject: [PATCH] watchdog: allow building BCM7038_WDT for BCM4908
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 is a SoCs family that shares a lot of hardware with BCM63xx
-including the watchdog block. Allow building this driver for it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Link: https://lore.kernel.org/r/20220209203202.26395-1-zajec5@gmail.com
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
----
- drivers/watchdog/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1800,7 +1800,7 @@ config BCM7038_WDT
- 	tristate "BCM7038 Watchdog"
- 	select WATCHDOG_CORE
- 	depends on HAS_IOMEM
--	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
-+	depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
- 	help
- 	 Watchdog driver for the built-in hardware in Broadcom 7038 and
- 	 later SoCs used in set-top boxes.  BCM7038 was made public
diff --git a/target/linux/bcm4908/patches-5.10/090-v5.20-watchdog-bcm7038_wdt-Support-BCM6345-compatible-stri.patch b/target/linux/bcm4908/patches-5.10/090-v5.20-watchdog-bcm7038_wdt-Support-BCM6345-compatible-stri.patch
deleted file mode 100644
index d6d2fd9ab612..000000000000
--- a/target/linux/bcm4908/patches-5.10/090-v5.20-watchdog-bcm7038_wdt-Support-BCM6345-compatible-stri.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 2dd441f16d6ad6104d85c4e5dfeb6dde4df26869 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 16 Feb 2022 07:34:08 +0100
-Subject: [PATCH] watchdog: bcm7038_wdt: Support BCM6345 compatible string
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-A new "compatible" value has been added in the commit 17fffe91ba36
-("dt-bindings: watchdog: Add BCM6345 compatible to BCM7038 binding").
-It's meant to be used for BCM63xx SoCs family but hardware block can be
-programmed just like the 7038 one.
-
-Cc: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Link: https://lore.kernel.org/r/20220216063408.23168-1-zajec5@gmail.com
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
----
- drivers/watchdog/bcm7038_wdt.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/watchdog/bcm7038_wdt.c
-+++ b/drivers/watchdog/bcm7038_wdt.c
-@@ -193,6 +193,7 @@ static SIMPLE_DEV_PM_OPS(bcm7038_wdt_pm_
- 			 bcm7038_wdt_resume);
- 
- static const struct of_device_id bcm7038_wdt_match[] = {
-+	{ .compatible = "brcm,bcm6345-wdt" },
- 	{ .compatible = "brcm,bcm7038-wdt" },
- 	{},
- };
diff --git a/target/linux/bcm4908/patches-5.10/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch b/target/linux/bcm4908/patches-5.10/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch
deleted file mode 100644
index a7c6d0102fe4..000000000000
--- a/target/linux/bcm4908/patches-5.10/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Feb 2021 22:01:03 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: limit amount of GPIOs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Linux driver can't handle more than 64 GPIOs
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -343,7 +343,7 @@
- 		gpio0: gpio-controller@500 {
- 			compatible = "brcm,bcm6345-gpio";
- 			reg-names = "dirout", "dat";
--			reg = <0x500 0x28>, <0x528 0x28>;
-+			reg = <0x500 0x8>, <0x528 0x8>;
- 
- 			#gpio-cells = <2>;
- 			gpio-controller;
diff --git a/target/linux/bcm4908/patches-5.10/400-mtd-rawnand-brcmnand-disable-WP-on-BCM4908.patch b/target/linux/bcm4908/patches-5.10/400-mtd-rawnand-brcmnand-disable-WP-on-BCM4908.patch
deleted file mode 100644
index 74dddb7f4895..000000000000
--- a/target/linux/bcm4908/patches-5.10/400-mtd-rawnand-brcmnand-disable-WP-on-BCM4908.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 21 Jan 2021 10:44:53 +0100
-Subject: [PATCH] mtd: rawnand: brcmnand: disable WP on BCM4908
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 contains NAND controller version 0x0701 (v7.1). It means that
-NAND_WP should be available.
-
-For some reason setting #WP on doesn't result in clearing NAND_STATUS_WP
-status bit:
-[    1.077857] bcm63138_nand ff801800.nand: timeout on status poll (expected c0000040 got c00000c0)
-[    1.086832] bcm63138_nand ff801800.nand: nand #WP expected on
-
-For now try working without touching #WP.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -37,7 +37,11 @@
-  * 1: NAND_WP is set by default, cleared for erase/write operations
-  * 2: NAND_WP is always cleared
-  */
-+#if IS_ENABLED(CONFIG_ARCH_BCM4908)
-+static int wp_on = 0;
-+#else
- static int wp_on = 1;
-+#endif
- module_param(wp_on, int, 0444);
- 
- /***********************************************************************
diff --git a/target/linux/bcm4908/patches-5.10/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch b/target/linux/bcm4908/patches-5.10/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch
deleted file mode 100644
index 5cdaa222c29e..000000000000
--- a/target/linux/bcm4908/patches-5.10/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Feb 2021 23:59:26 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: enable GPHY for switch probing
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-GPHY needs to be enabled to succesfully probe & setup switch port
-connected to it. Otherwise hardcoding PHY OUI would be required.
-
-Before:
-brcm-sf2 80080000.switch lan4 (uninitialized): PHY [800c05c0.mdio--1:08] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan3 (uninitialized): PHY [800c05c0.mdio--1:09] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan2 (uninitialized): PHY [800c05c0.mdio--1:0a] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan1 (uninitialized): PHY [800c05c0.mdio--1:0b] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch wan (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 7
-
-After:
-brcm-sf2 80080000.switch lan4 (uninitialized): PHY [800c05c0.mdio--1:08] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan3 (uninitialized): PHY [800c05c0.mdio--1:09] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan2 (uninitialized): PHY [800c05c0.mdio--1:0a] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan1 (uninitialized): PHY [800c05c0.mdio--1:0b] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch wan (uninitialized): PHY [800c05c0.mdio--1:0c] driver [Generic PHY] (irq=POLL)
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/net/dsa/bcm_sf2.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1540,10 +1540,14 @@ static int bcm_sf2_sw_probe(struct platf
- 	rev = reg_readl(priv, REG_PHY_REVISION);
- 	priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
- 
-+	bcm_sf2_gphy_enable_set(priv->dev->ds, true);
-+
- 	ret = b53_switch_register(dev);
- 	if (ret)
- 		goto out_mdio;
- 
-+	bcm_sf2_gphy_enable_set(priv->dev->ds, false);
-+
- 	dev_info(&pdev->dev,
- 		 "Starfighter 2 top: %x.%02x, core: %x.%02x, IRQs: %d, %d\n",
- 		 priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
diff --git a/target/linux/bcm4908/patches-5.10/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch b/target/linux/bcm4908/patches-5.10/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
deleted file mode 100644
index 7659aa266bc3..000000000000
--- a/target/linux/bcm4908/patches-5.10/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 16 Feb 2021 00:06:35 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: keep GPHY enabled on the BCM4908
-
-Trying to access disabled PHY results in MDIO_READ_FAIL and:
-[   11.962886] brcm-sf2 80080000.switch wan: configuring for phy/internal link mode
-[   11.972500] 8021q: adding VLAN 0 to HW filter on device wan
-[   11.980205] ------------[ cut here ]------------
-[   11.984885] WARNING: CPU: 0 PID: 7 at phy_error+0x10/0x58
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/net/dsa/bcm_sf2.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1554,6 +1554,12 @@ static int bcm_sf2_sw_probe(struct platf
- 		 priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
- 		 priv->irq0, priv->irq1);
- 
-+	/* BCM4908 has 5 GPHYs which means bcm_sf2_port_setup() will not enable
-+	 * GPHY when needed. Leave it enabled here.
-+	 */
-+	if (priv->type == BCM4908_DEVICE_ID)
-+		bcm_sf2_gphy_enable_set(priv->dev->ds, true);
-+
- 	return 0;
- 
- out_mdio:
diff --git a/target/linux/bcm53xx/config-5.10 b/target/linux/bcm53xx/config-5.10
deleted file mode 100644
index 04b972131a76..000000000000
--- a/target/linux/bcm53xx/config-5.10
+++ /dev/null
@@ -1,308 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_5301X=y
-CONFIG_ARCH_BCM_53573=y
-# CONFIG_ARCH_BCM_HR2 is not set
-CONFIG_ARCH_BCM_IPROC=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_B53=y
-CONFIG_B53_MDIO_DRIVER=y
-CONFIG_B53_SRAB_DRIVER=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_SFLASH=y
-# CONFIG_BCM_CYGNUS_PHY is not set
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_NS_THERMAL=y
-CONFIG_BCM_SR_THERMAL=y
-CONFIG_BGMAC=y
-CONFIG_BGMAC_BCMA=y
-# CONFIG_BGMAC_PLATFORM is not set
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-# CONFIG_CLK_BCM_NS2 is not set
-CONFIG_CLK_BCM_NSP=y
-# CONFIG_CLK_BCM_SR is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_IPROC=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BCM_5301X=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MISC=y
-CONFIG_DEBUG_UART_8250=y
-CONFIG_DEBUG_UART_8250_SHIFT=0
-CONFIG_DEBUG_UART_PHYS=0x18000300
-CONFIG_DEBUG_UART_VIRT=0xf1000300
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXTCON=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_BCM_XGS_IPROC=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM2835=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_LEDS_BCM63138 is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BCM_IPROC=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_BUS_MUX=y
-# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND_BRCMNAND=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_OF_PARTS_LINKSYS_NS=y
-CONFIG_MTD_PARSER_TPLINK_SAFELOADER=y
-CONFIG_MTD_PARSER_TRX=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_TAG_BRCM=y
-CONFIG_NET_DSA_TAG_BRCM_COMMON=y
-CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
-CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NR_CPUS=2
-CONFIG_NVMEM=y
-CONFIG_NVMEM_BRCM_NVRAM=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIE_IPROC=y
-CONFIG_PCIE_IPROC_BCMA=y
-# CONFIG_PCIE_IPROC_PLATFORM is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_BCM_NS_USB2 is not set
-# CONFIG_PHY_BCM_NS_USB3 is not set
-# CONFIG_PHY_BCM_SR_PCIE is not set
-CONFIG_PHY_BCM_SR_USB=y
-# CONFIG_PHY_BRCM_SATA is not set
-# CONFIG_PHY_NS2_USB_DRD is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_IPROC_GPIO is not set
-CONFIG_PINCTRL_NS=y
-# CONFIG_PINCTRL_NS2_MUX is not set
-CONFIG_PWM=y
-CONFIG_PWM_BCM_IPROC=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM_QSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0001-ARM-dts-BCM5301X-Linksys-EA9500-add-port-5-and-port-.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0001-ARM-dts-BCM5301X-Linksys-EA9500-add-port-5-and-port-.patch
deleted file mode 100644
index f0cfbf8e638c..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0001-ARM-dts-BCM5301X-Linksys-EA9500-add-port-5-and-port-.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 1ca5f2430c4f9d85b98b8d6e5d93f8d4802faf8e Mon Sep 17 00:00:00 2001
-From: Vivek Unune <npcomplete13@gmail.com>
-Date: Wed, 14 Oct 2020 15:27:27 -0400
-Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
-
-Add ports 5 and 7 which are connected to gmac cores 1 & 2.
-These will be disabled for now.
-
-Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/bcm47094-linksys-panamera.dts    | 24 +++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -242,6 +242,30 @@
- 			label = "wan";
- 		};
- 
-+		port@5 {
-+			reg = <5>;
-+			ethernet = <&gmac0>;
-+			label = "cpu";
-+			status = "disabled";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+
-+		port@7 {
-+			reg = <7>;
-+			ethernet = <&gmac1>;
-+			label = "cpu";
-+			status = "disabled";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+
- 		port@8 {
- 			reg = <8>;
- 			ethernet = <&gmac2>;
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0002-ARM-dts-BCM5301X-Harmonize-EHCI-OHCI-DT-nodes-name.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0002-ARM-dts-BCM5301X-Harmonize-EHCI-OHCI-DT-nodes-name.patch
deleted file mode 100644
index d6e5fca96761..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0002-ARM-dts-BCM5301X-Harmonize-EHCI-OHCI-DT-nodes-name.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 74abbfe99f43eb7466d26d9e48fbeb46b8f3d804 Mon Sep 17 00:00:00 2001
-From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
-Date: Tue, 20 Oct 2020 14:59:37 +0300
-Subject: [PATCH] ARM: dts: BCM5301X: Harmonize EHCI/OHCI DT nodes name
-
-In accordance with the Generic EHCI/OHCI bindings the corresponding node
-name is suppose to comply with the Generic USB HCD DT schema, which
-requires the USB nodes to have the name acceptable by the regexp:
-"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
-nodes are correctly named.
-
-Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
- arch/arm/boot/dts/bcm53573.dtsi | 4 ++--
- 2 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -267,7 +267,7 @@
- 
- 			interrupt-parent = <&gic>;
- 
--			ehci: ehci@21000 {
-+			ehci: usb@21000 {
- 				#usb-cells = <0>;
- 
- 				compatible = "generic-ehci";
-@@ -289,7 +289,7 @@
- 				};
- 			};
- 
--			ohci: ohci@22000 {
-+			ohci: usb@22000 {
- 				#usb-cells = <0>;
- 
- 				compatible = "generic-ohci";
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -135,7 +135,7 @@
- 			#address-cells = <1>;
- 			#size-cells = <1>;
- 
--			ehci: ehci@4000 {
-+			ehci: usb@4000 {
- 				compatible = "generic-ehci";
- 				reg = <0x4000 0x1000>;
- 				interrupt-parent = <&gic>;
-@@ -155,7 +155,7 @@
- 				};
- 			};
- 
--			ohci: ohci@d000 {
-+			ohci: usb@d000 {
- 				#usb-cells = <0>;
- 
- 				compatible = "generic-ohci";
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0003-ARM-dts-BCM5310X-Harmonize-xHCI-DT-nodes-name.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0003-ARM-dts-BCM5310X-Harmonize-xHCI-DT-nodes-name.patch
deleted file mode 100644
index 2f9c8ce8c065..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0003-ARM-dts-BCM5310X-Harmonize-xHCI-DT-nodes-name.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 4b650a20bdb5f9558007dd3055a17a1644a91c3e Mon Sep 17 00:00:00 2001
-From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
-Date: Tue, 20 Oct 2020 14:59:46 +0300
-Subject: [PATCH] ARM: dts: BCM5310X: Harmonize xHCI DT nodes name
-
-In accordance with the Generic xHCI bindings the corresponding node
-name is suppose to comply with the Generic USB HCD DT schema, which
-requires the USB nodes to have the name acceptable by the regexp:
-"^usb(@.*)?" . Make sure the "generic-xhci"-compatible nodes are
-correctly named.
-
-Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
-Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -320,7 +320,7 @@
- 
- 			interrupt-parent = <&gic>;
- 
--			xhci: xhci@23000 {
-+			xhci: usb@23000 {
- 				#usb-cells = <0>;
- 
- 				compatible = "generic-xhci";
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0004-ARM-dts-BCM5301X-Linksys-EA9500-add-fixed-partitions.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0004-ARM-dts-BCM5301X-Linksys-EA9500-add-fixed-partitions.patch
deleted file mode 100644
index c3fdd163d9a8..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0004-ARM-dts-BCM5301X-Linksys-EA9500-add-fixed-partitions.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From bd9a01e28e5d1632528e531480b42d6e2c861d88 Mon Sep 17 00:00:00 2001
-From: Vivek Unune <npcomplete13@gmail.com>
-Date: Sun, 1 Nov 2020 15:08:03 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions
-
-This router has dual paritions to store trx firmware image and
-dual partitions for nvram. The second one in each of these cases acts
-as a backup store.
-
-When tested with OpenWrt, the default partition parser causes two issues:
-
-1. It labels both nvram partitions as nvram. In factory, second one is
-labeled devinfo.
-2. It parses second trx image and tries to create second 'linux' partition
-and fails with - cannot create duplicate 'linux' partition
-
-The following patch works around both of these issues.
-
-Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/bcm47094-linksys-panamera.dts    | 41 +++++++++++++++++++
- 1 file changed, 41 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -292,3 +292,44 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&nandcs {
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "boot";
-+			reg = <0x0000000 0x0080000>;
-+			read-only;
-+		};
-+
-+		partition@80000 {
-+			label = "nvram";
-+			reg = <0x080000 0x0100000>;
-+		};
-+
-+		partition@180000{
-+			label = "devinfo";
-+			reg = <0x0180000 0x080000>;
-+		};
-+
-+		partition@200000 {
-+			label = "firmware";
-+			reg = <0x0200000 0x01D00000>;
-+			compatible = "brcm,trx";
-+		};
-+
-+		partition@1F00000 {
-+			label = "failsafe";
-+			reg = <0x01F00000 0x01D00000>;
-+			read-only;
-+		};
-+
-+		partition@5200000 {
-+			label = "system";
-+			reg = <0x05200000 0x02E00000>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0005-ARM-dts-BCM5301X-Use-corretc-pinctrl-compatible-for-.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0005-ARM-dts-BCM5301X-Use-corretc-pinctrl-compatible-for-.patch
deleted file mode 100644
index ddebdc434306..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0005-ARM-dts-BCM5301X-Use-corretc-pinctrl-compatible-for-.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 2f34ae32f5e74096540cd7ce95bfd467cb74b21a Mon Sep 17 00:00:00 2001
-From: Vivek Unune <npcomplete13@gmail.com>
-Date: Wed, 4 Nov 2020 15:29:51 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM47094 version of pinmux uses different compatible and supports MDIO
-pinmux pins. Hence, use the correct compatible string and defines the
-MDIO pins group.
-
-Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094.dtsi | 9 +++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
- 2 files changed, 10 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -8,6 +8,15 @@
- / {
- };
- 
-+&pinctrl {
-+	compatible = "brcm,bcm4709-pinmux";
-+
-+	pinmux_mdio: mdio {
-+		groups = "mdio_grp";
-+		function = "mdio";
-+	};
-+};
-+
- &usb3_phy {
- 	compatible = "brcm,ns-bx-usb3-phy";
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -430,7 +430,7 @@
- 			#address-cells = <1>;
- 			#size-cells = <1>;
- 
--			pin-controller@1c0 {
-+			pinctrl: pin-controller@1c0 {
- 				compatible = "brcm,bcm4708-pinmux";
- 				reg = <0x1c0 0x24>;
- 				reg-names = "cru_gpio_control";
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0006-ARM-dts-BCM5301X-Linksys-EA9500-make-use-of-pinctrl.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0006-ARM-dts-BCM5301X-Linksys-EA9500-make-use-of-pinctrl.patch
deleted file mode 100644
index 785271546b9c..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0006-ARM-dts-BCM5301X-Linksys-EA9500-make-use-of-pinctrl.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From c862059875cffc013ee27bf9759ac288224e7a14 Mon Sep 17 00:00:00 2001
-From: Vivek Unune <npcomplete13@gmail.com>
-Date: Wed, 4 Nov 2020 15:29:52 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl
-
-Now that we have a pin controller, use that instead of manuplating the
-mdio/mdc pins directly. i.e. we no longer require the mdio-mii-mux
-
-Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/bcm47094-linksys-panamera.dts    | 26 +++----------------
- 1 file changed, 4 insertions(+), 22 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -123,33 +123,13 @@
- 		};
- 	};
- 
--	mdio-bus-mux {
--		#address-cells = <1>;
--		#size-cells = <0>;
-+	mdio-bus-mux@18003000 {
- 
- 		/* BIT(9) = 1 => external mdio */
--		mdio_ext: mdio@200 {
-+		mdio@200 {
- 			reg = <0x200>;
- 			#address-cells = <1>;
- 			#size-cells = <0>;
--		};
--	};
--
--	mdio-mii-mux {
--		compatible = "mdio-mux-mmioreg";
--		mdio-parent-bus = <&mdio_ext>;
--		#address-cells = <1>;
--		#size-cells = <0>;
--		reg = <0x1800c1c0 0x4>;
--
--		/* BIT(6) = mdc, BIT(7) = mdio */
--		mux-mask = <0xc0>;
--
--		mdio-mii@0 {
--			/* Enable MII function */
--			reg = <0x0>;
--			#address-cells = <1>;
--			#size-cells = <0>;
- 
- 			switch@0  {
- 				compatible = "brcm,bcm53125";
-@@ -159,6 +139,8 @@
- 				reset-names = "robo_reset";
- 				reg = <0>;
- 				dsa,member = <1 0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinmux_mdio>;
- 
- 				ports {
- 					#address-cells = <1>;
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0007-ARM-dts-BCM5301X-Move-CRU-devices-to-the-CRU-node.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0007-ARM-dts-BCM5301X-Move-CRU-devices-to-the-CRU-node.patch
deleted file mode 100644
index 3c3db540d0d9..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0007-ARM-dts-BCM5301X-Move-CRU-devices-to-the-CRU-node.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 776461b1795b4dc4084894cf53399044aafa1d21 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 11 Nov 2020 15:55:38 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Move CRU devices to the CRU node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Clocks and thermal blocks are part of the CRU ("Clock and Reset Unit" or
-"Central Resource Unit").
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 51 +++++++++++++++++----------------
- 1 file changed, 26 insertions(+), 25 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -430,6 +430,26 @@
- 			#address-cells = <1>;
- 			#size-cells = <1>;
- 
-+			lcpll0: lcpll0@100 {
-+				#clock-cells = <1>;
-+				compatible = "brcm,nsp-lcpll0";
-+				reg = <0x100 0x14>;
-+				clocks = <&osc>;
-+				clock-output-names = "lcpll0", "pcie_phy",
-+						     "sdio", "ddr_phy";
-+			};
-+
-+			genpll: genpll@140 {
-+				#clock-cells = <1>;
-+				compatible = "brcm,nsp-genpll";
-+				reg = <0x140 0x24>;
-+				clocks = <&osc>;
-+				clock-output-names = "genpll", "phy",
-+						     "ethernetclk",
-+						     "usbclk", "iprocfast",
-+						     "sata1", "sata2";
-+			};
-+
- 			pinctrl: pin-controller@1c0 {
- 				compatible = "brcm,bcm4708-pinmux";
- 				reg = <0x1c0 0x24>;
-@@ -456,32 +476,13 @@
- 					function = "uart1";
- 				};
- 			};
--		};
--	};
- 
--	lcpll0: lcpll0@1800c100 {
--		#clock-cells = <1>;
--		compatible = "brcm,nsp-lcpll0";
--		reg = <0x1800c100 0x14>;
--		clocks = <&osc>;
--		clock-output-names = "lcpll0", "pcie_phy", "sdio",
--				     "ddr_phy";
--	};
--
--	genpll: genpll@1800c140 {
--		#clock-cells = <1>;
--		compatible = "brcm,nsp-genpll";
--		reg = <0x1800c140 0x24>;
--		clocks = <&osc>;
--		clock-output-names = "genpll", "phy", "ethernetclk",
--				     "usbclk", "iprocfast", "sata1",
--				     "sata2";
--	};
--
--	thermal: thermal@1800c2c0 {
--		compatible = "brcm,ns-thermal";
--		reg = <0x1800c2c0 0x10>;
--		#thermal-sensor-cells = <0>;
-+			thermal: thermal@2c0 {
-+				compatible = "brcm,ns-thermal";
-+				reg = <0x2c0 0x10>;
-+				#thermal-sensor-cells = <0>;
-+			};
-+		};
- 	};
- 
- 	srab: srab@18007000 {
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0008-ARM-dts-BCM5301X-Disable-USB-3-PHY-on-devices-withou.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0008-ARM-dts-BCM5301X-Disable-USB-3-PHY-on-devices-withou.patch
deleted file mode 100644
index 64415c14dbdb..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0008-ARM-dts-BCM5301X-Disable-USB-3-PHY-on-devices-withou.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 632ddf978565378e7efb9ea77c0ba239ea66bfdc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 13 Nov 2020 11:09:19 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB
- 3
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It seems pointless to have it enabled.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts       | 4 ----
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts       | 4 ----
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts      | 4 ----
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts      | 4 ----
- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 ----
- 6 files changed, 24 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -57,10 +57,6 @@
- 	status = "okay";
- };
- 
--&usb3_phy {
--	status = "okay";
--};
--
- &srab {
- 	status = "okay";
- 
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -64,10 +64,6 @@
- 	status = "okay";
- };
- 
--&usb3_phy {
--	status = "okay";
--};
--
- &srab {
- 	status = "okay";
- 
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -117,7 +117,3 @@
- 		};
- 	};
- };
--
--&usb3_phy {
--	status = "okay";
--};
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -57,10 +57,6 @@
- 	status = "okay";
- };
- 
--&usb3_phy {
--	status = "okay";
--};
--
- &srab {
- 	status = "okay";
- 
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -105,10 +105,6 @@
- 	status = "okay";
- };
- 
--&usb3_phy {
--	status = "okay";
--};
--
- &srab {
- 	status = "okay";
- 
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -126,7 +126,3 @@
- &usb2 {
- 	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- };
--
--&usb3_phy {
--	status = "okay";
--};
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0009-ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0009-ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150.patch
deleted file mode 100644
index 5834e300f5af..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0009-ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From b2ab5e8697ef6591aeeda23be49e096705dbbda3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 13 Nov 2020 10:50:12 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This device has a functional USB 3 port so PHY is required.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reported-by: kernel test robot <lkp@intel.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -71,6 +71,10 @@
- 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
- 
-+&usb3_phy {
-+	status = "okay";
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0010-ARM-dts-BCM5301X-Update-Ethernet-switch-node-name.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0010-ARM-dts-BCM5301X-Update-Ethernet-switch-node-name.patch
deleted file mode 100644
index b3a774e3403c..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0010-ARM-dts-BCM5301X-Update-Ethernet-switch-node-name.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From f527cb6f3345f7faa8e61dd9f3c437437327428c Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 9 Nov 2020 11:41:01 -0800
-Subject: [PATCH] ARM: dts: BCM5301X: Update Ethernet switch node name
-
-Update the switch unit name from srab to ethernet-switch, allowing us to
-fix warnings such as:
-
-  CHECK   arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml
-arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml:
-srab@18007000: $nodename:0: 'srab@18007000' does not match
-'^(ethernet-)?switch(@.*)?$'
-        From schema:
-Documentation/devicetree/bindings/net/dsa/b53.yaml
-
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -485,7 +485,7 @@
- 		};
- 	};
- 
--	srab: srab@18007000 {
-+	srab: ethernet-switch@18007000 {
- 		compatible = "brcm,bcm5301x-srab";
- 		reg = <0x18007000 0x1000>;
- 
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0011-ARM-dts-BCM5301X-Add-a-default-compatible-for-switch.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0011-ARM-dts-BCM5301X-Add-a-default-compatible-for-switch.patch
deleted file mode 100644
index 677e94f271c2..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0011-ARM-dts-BCM5301X-Add-a-default-compatible-for-switch.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 953efcb0c0234f8c488ebd4090378e949d6ba78b Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 9 Nov 2020 16:42:09 -0800
-Subject: [PATCH] ARM: dts: BCM5301X: Add a default compatible for switch node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Provide a default compatible string which is based on the 53011 SRAB
-compatible by default. The 4709 and 47094 default to the 53012 SRAB
-compatible.
-
-This allows us to have sane defaults and silences the following
-warnings:
-
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml:
-ethernet-switch@18007000: compatible: 'oneOf' conditional failed, one
-must be fixed:
-        ['brcm,bcm5301x-srab'] is too short
-        'brcm,bcm5325' was expected
-        'brcm,bcm53115' was expected
-        'brcm,bcm53125' was expected
-        'brcm,bcm53128' was expected
-        'brcm,bcm5365' was expected
-        'brcm,bcm5395' was expected
-        'brcm,bcm5389' was expected
-        'brcm,bcm5397' was expected
-        'brcm,bcm5398' was expected
-        'brcm,bcm11360-srab' was expected
-        'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab',
-'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab',
-'brcm,bcm53019-srab']
-        'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab',
-'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab',
-'brcm,bcm58311-srab', 'brcm,bcm58313-srab']
-        'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab',
-'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab',
-'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab']
-        'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch',
-'brcm,bcm6328-switch', 'brcm,bcm6368-switch']
-        From schema:
-Documentation/devicetree/bindings/net/dsa/b53.yaml
-
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709.dtsi  | 4 ++++
- arch/arm/boot/dts/bcm47094.dtsi | 4 ++++
- arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
- 3 files changed, 9 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm4709.dtsi
-+++ b/arch/arm/boot/dts/bcm4709.dtsi
-@@ -9,3 +9,7 @@
- 	clock-frequency = <125000000>;
- 	status = "okay";
- };
-+
-+&srab {
-+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-+};
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -25,3 +25,7 @@
- 	clock-frequency = <125000000>;
- 	status = "okay";
- };
-+
-+&srab {
-+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-+};
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -486,7 +486,7 @@
- 	};
- 
- 	srab: ethernet-switch@18007000 {
--		compatible = "brcm,bcm5301x-srab";
-+		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
- 		reg = <0x18007000 0x1000>;
- 
- 		status = "disabled";
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0012-ARM-dts-BCM5301X-Provide-defaults-ports-container-no.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0012-ARM-dts-BCM5301X-Provide-defaults-ports-container-no.patch
deleted file mode 100644
index 6e4f5f7bb8a0..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0012-ARM-dts-BCM5301X-Provide-defaults-ports-container-no.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From fd577b41421bc24e2d04cab96d387301b649eb14 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 9 Nov 2020 17:20:17 -0800
-Subject: [PATCH] ARM: dts: BCM5301X: Provide defaults ports container node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Provide an empty 'ports' container node with the correct #address-cells
-and #size-cells properties. This silences the following warning:
-
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml:
-ethernet-switch@18007000: 'oneOf' conditional failed, one must be fixed:
-        'ports' is a required property
-        'ethernet-ports' is a required property
-        From schema:
-Documentation/devicetree/bindings/net/dsa/b53.yaml
-
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts     | 3 ---
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts     | 3 ---
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts    | 3 ---
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts    | 3 ---
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts    | 3 ---
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts  | 3 ---
- arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts    | 3 ---
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts    | 3 ---
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts    | 3 ---
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 3 ---
- arch/arm/boot/dts/bcm5301x.dtsi                  | 4 ++++
- arch/arm/boot/dts/bcm953012er.dts                | 3 ---
- 12 files changed, 4 insertions(+), 33 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -61,9 +61,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "poe";
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -68,9 +68,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@4 {
- 			reg = <4>;
- 			label = "lan";
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -122,9 +122,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "lan4";
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -61,9 +61,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@4 {
- 			reg = <4>;
- 			label = "poe";
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -109,9 +109,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "lan4";
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -201,9 +201,6 @@
- 	dsa,member = <0 0>;
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@1 {
- 			reg = <1>;
- 			label = "lan7";
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -59,9 +59,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "poe";
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -57,9 +57,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "lan";
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -108,9 +108,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "lan4";
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -83,9 +83,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "lan4";
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -492,6 +492,10 @@
- 		status = "disabled";
- 
- 		/* ports are defined in board DTS */
-+		ports {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
- 	};
- 
- 	rng: rng@18004000 {
---- a/arch/arm/boot/dts/bcm953012er.dts
-+++ b/arch/arm/boot/dts/bcm953012er.dts
-@@ -69,9 +69,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "port0";
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0013-ARM-dts-NSP-Update-ethernet-switch-node-name.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0013-ARM-dts-NSP-Update-ethernet-switch-node-name.patch
deleted file mode 100644
index 6a7641648dfe..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0013-ARM-dts-NSP-Update-ethernet-switch-node-name.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From fd66cd0d79cb836badecb91fdd19afd32afbb443 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 9 Nov 2020 12:02:08 -0800
-Subject: [PATCH 13/16] ARM: dts: NSP: Update ethernet switch node name
-
-Update the switch unit name from srab to ethernet-switch, allowing us
-to fix warnings such as:
-
-     CHECK   arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml
-    arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml:
-    srab@18007000: $nodename:0: 'srab@18007000' does not match
-    '^(ethernet-)?switch(@.*)?$'
-            From schema:
-    Documentation/devicetree/bindings/net/dsa/b53.yaml
-
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm-nsp.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm-nsp.dtsi
-+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
-@@ -385,7 +385,7 @@
- 			clock-names = "apb_pclk";
- 		};
- 
--		srab: srab@36000 {
-+		srab: ethernet-switch@36000 {
- 			compatible = "brcm,nsp-srab";
- 			reg = <0x36000 0x1000>,
- 			      <0x3f308 0x8>,
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0014-ARM-dts-NSP-Fix-Ethernet-switch-SGMII-register-name.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0014-ARM-dts-NSP-Fix-Ethernet-switch-SGMII-register-name.patch
deleted file mode 100644
index 033dc0c03116..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0014-ARM-dts-NSP-Fix-Ethernet-switch-SGMII-register-name.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 8b0235d1deace8f1bd8cdd149d698fee3974fdf4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 9 Nov 2020 12:06:15 -0800
-Subject: [PATCH 14/16] ARM: dts: NSP: Fix Ethernet switch SGMII register name
-
-The register name should be "sgmii_config", not "sgmii", this is not a
-functional change since no code is currently looking for that register
-by name (or at all).
-
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm-nsp.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm-nsp.dtsi
-+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
-@@ -390,7 +390,7 @@
- 			reg = <0x36000 0x1000>,
- 			      <0x3f308 0x8>,
- 			      <0x3f410 0xc>;
--			reg-names = "srab", "mux_config", "sgmii";
-+			reg-names = "srab", "mux_config", "sgmii_config";
- 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
- 				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
- 				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0015-ARM-dts-NSP-Add-a-SRAB-compatible-string-for-each-bo.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0015-ARM-dts-NSP-Add-a-SRAB-compatible-string-for-each-bo.patch
deleted file mode 100644
index 890b913b0cc4..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0015-ARM-dts-NSP-Add-a-SRAB-compatible-string-for-each-bo.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 42791b317db4cda36751f57bada27857849811d3 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 9 Nov 2020 17:41:32 -0800
-Subject: [PATCH 15/16] ARM: dts: NSP: Add a SRAB compatible string for each
- board
-
-Provide a valid compatible string for the Ethernet switch node based on
-the board including the switch. This allows us to have sane defaults and
-silences the following warnings:
-
- arch/arm/boot/dts/bcm958522er.dt.yaml:
-    ethernet-switch@36000: compatible: 'oneOf' conditional failed,
-one
-    must be fixed:
-            ['brcm,bcm5301x-srab'] is too short
-            'brcm,bcm5325' was expected
-            'brcm,bcm53115' was expected
-            'brcm,bcm53125' was expected
-            'brcm,bcm53128' was expected
-            'brcm,bcm5365' was expected
-            'brcm,bcm5395' was expected
-            'brcm,bcm5389' was expected
-            'brcm,bcm5397' was expected
-            'brcm,bcm5398' was expected
-            'brcm,bcm11360-srab' was expected
-            'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab',
-    'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab',
-    'brcm,bcm53019-srab']
-            'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab',
-    'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab',
-    'brcm,bcm58311-srab', 'brcm,bcm58313-srab']
-            'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab',
-    'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab',
-    'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab']
-            'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch',
-    'brcm,bcm6328-switch', 'brcm,bcm6368-switch']
-            From schema:
-    Documentation/devicetree/bindings/net/dsa/b53.yaml
-
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm958522er.dts  | 4 ++++
- arch/arm/boot/dts/bcm958525er.dts  | 4 ++++
- arch/arm/boot/dts/bcm958525xmc.dts | 4 ++++
- 3 files changed, 12 insertions(+)
-
---- a/arch/arm/boot/dts/bcm958522er.dts
-+++ b/arch/arm/boot/dts/bcm958522er.dts
-@@ -178,3 +178,7 @@
- &xhci {
- 	status = "okay";
- };
-+
-+&srab {
-+	compatible = "brcm,bcm58522-srab", "brcm,nsp-srab";
-+};
---- a/arch/arm/boot/dts/bcm958525er.dts
-+++ b/arch/arm/boot/dts/bcm958525er.dts
-@@ -190,3 +190,7 @@
- &xhci {
- 	status = "okay";
- };
-+
-+&srab {
-+	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
-+};
---- a/arch/arm/boot/dts/bcm958525xmc.dts
-+++ b/arch/arm/boot/dts/bcm958525xmc.dts
-@@ -210,3 +210,7 @@
- &xhci {
- 	status = "okay";
- };
-+
-+&srab {
-+	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/030-v5.11-0016-ARM-dts-NSP-Provide-defaults-ports-container-node.patch b/target/linux/bcm53xx/patches-5.10/030-v5.11-0016-ARM-dts-NSP-Provide-defaults-ports-container-node.patch
deleted file mode 100644
index 7ca01b5b7dec..000000000000
--- a/target/linux/bcm53xx/patches-5.10/030-v5.11-0016-ARM-dts-NSP-Provide-defaults-ports-container-node.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 51e40c25aa18d926a8eb1c07289d01611b21123a Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 9 Nov 2020 17:44:33 -0800
-Subject: [PATCH 16/16] ARM: dts: NSP: Provide defaults ports container node
-
-Provide an empty 'ports' container node with the correct #address-cells
-and #size-cells properties. This silences the following warning:
-
-arch/arm/boot/dts/bcm958522er.dt.yaml:
-ethernet-switch@36000: 'oneOf' conditional failed, one must be fixed:
-            'ports' is a required property
-            'ethernet-ports' is a required property
-            From schema:
-Documentation/devicetree/bindings/net/dsa/b53.yaml
-
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm-nsp.dtsi    | 4 ++++
- arch/arm/boot/dts/bcm958622hr.dts | 3 ---
- arch/arm/boot/dts/bcm958623hr.dts | 3 ---
- arch/arm/boot/dts/bcm958625hr.dts | 3 ---
- arch/arm/boot/dts/bcm958625k.dts  | 3 ---
- arch/arm/boot/dts/bcm988312hr.dts | 3 ---
- 6 files changed, 4 insertions(+), 15 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-nsp.dtsi
-+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
-@@ -420,6 +420,10 @@
- 			status = "disabled";
- 
- 			/* ports are defined in board DTS */
-+			ports {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+			};
- 		};
- 
- 		i2c0: i2c@38000 {
---- a/arch/arm/boot/dts/bcm958622hr.dts
-+++ b/arch/arm/boot/dts/bcm958622hr.dts
-@@ -176,9 +176,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			label = "port0";
- 			reg = <0>;
---- a/arch/arm/boot/dts/bcm958623hr.dts
-+++ b/arch/arm/boot/dts/bcm958623hr.dts
-@@ -180,9 +180,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			label = "port0";
- 			reg = <0>;
---- a/arch/arm/boot/dts/bcm958625hr.dts
-+++ b/arch/arm/boot/dts/bcm958625hr.dts
-@@ -195,9 +195,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			label = "port0";
- 			reg = <0>;
---- a/arch/arm/boot/dts/bcm958625k.dts
-+++ b/arch/arm/boot/dts/bcm958625k.dts
-@@ -216,9 +216,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			label = "port0";
- 			reg = <0>;
---- a/arch/arm/boot/dts/bcm988312hr.dts
-+++ b/arch/arm/boot/dts/bcm988312hr.dts
-@@ -184,9 +184,6 @@
- 	status = "okay";
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			label = "port0";
- 			reg = <0>;
diff --git a/target/linux/bcm53xx/patches-5.10/031-v5.13-0002-ARM-dts-BCM5301X-Describe-NVMEM-NVRAM-on-Linksys-Lux.patch b/target/linux/bcm53xx/patches-5.10/031-v5.13-0002-ARM-dts-BCM5301X-Describe-NVMEM-NVRAM-on-Linksys-Lux.patch
deleted file mode 100644
index 136d221a97d0..000000000000
--- a/target/linux/bcm53xx/patches-5.10/031-v5.13-0002-ARM-dts-BCM5301X-Describe-NVMEM-NVRAM-on-Linksys-Lux.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 428ac8df021dd1cbcc693eb76636873d42327e5d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 10 Mar 2021 22:04:46 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Describe NVMEM NVRAM on Linksys & Luxul
- routers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Provide access to NVRAM which contains device environment variables.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts  | 5 +++++
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts    | 5 +++++
- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts     | 5 +++++
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts  | 5 +++++
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts    | 5 +++++
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts    | 5 +++++
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts    | 5 +++++
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 5 +++++
- 8 files changed, 40 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -21,6 +21,11 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	nvram@1c080000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1c080000 0x180000>;
-+	};
-+
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -21,6 +21,11 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -22,6 +22,11 @@
- 		      <0x88000000 0x08000000>;
- 	};
- 
-+	nvram@1c080000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1c080000 0x180000>;
-+	};
-+
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 		#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -22,6 +22,11 @@
- 		      <0x88000000 0x08000000>;
- 	};
- 
-+	nvram@1c080000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1c080000 0x100000>;
-+	};
-+
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -22,6 +22,11 @@
- 		      <0x88000000 0x18000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -22,6 +22,11 @@
- 		      <0x88000000 0x18000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -22,6 +22,11 @@
- 		      <0x88000000 0x08000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -22,6 +22,11 @@
- 		      <0x88000000 0x18000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
diff --git a/target/linux/bcm53xx/patches-5.10/031-v5.13-0003-ARM-dts-BCM5301X-Fix-Linksys-EA9500-partitions.patch b/target/linux/bcm53xx/patches-5.10/031-v5.13-0003-ARM-dts-BCM5301X-Fix-Linksys-EA9500-partitions.patch
deleted file mode 100644
index d52f46f979b6..000000000000
--- a/target/linux/bcm53xx/patches-5.10/031-v5.13-0003-ARM-dts-BCM5301X-Fix-Linksys-EA9500-partitions.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 1d3352aeed164ef73f05cf80ca001f11d2f3312d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 29 Mar 2021 07:54:30 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix Linksys EA9500 partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Partitions are basically fixed indeed but firmware ones don't have
-hardcoded function ("firmware" vs "failsafe"). Actual function depends
-on bootloader configuration. Use a proper binding for that.
-
-While at it fix numbers formatting to avoid:
-arch/arm/boot/dts/bcm47094-linksys-panamera.dt.yaml: partitions: 'partition@1F00000' does not match any of the regexes: '^partition@[0-9a-f]+$', 'pinctrl-[0-9]+'
-        From schema: Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 16 +++++++---------
- 1 file changed, 7 insertions(+), 9 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -279,7 +279,7 @@
- 
- &nandcs {
- 	partitions {
--		compatible = "fixed-partitions";
-+		compatible = "linksys,ns-partitions";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 
-@@ -300,20 +300,18 @@
- 		};
- 
- 		partition@200000 {
--			label = "firmware";
--			reg = <0x0200000 0x01D00000>;
--			compatible = "brcm,trx";
-+			reg = <0x0200000 0x01d00000>;
-+			compatible = "linksys,ns-firmware", "brcm,trx";
- 		};
- 
--		partition@1F00000 {
--			label = "failsafe";
--			reg = <0x01F00000 0x01D00000>;
--			read-only;
-+		partition@1f00000 {
-+			reg = <0x01f00000 0x01d00000>;
-+			compatible = "linksys,ns-firmware", "brcm,trx";
- 		};
- 
- 		partition@5200000 {
- 			label = "system";
--			reg = <0x05200000 0x02E00000>;
-+			reg = <0x05200000 0x02e00000>;
- 		};
- 	};
- };
diff --git a/target/linux/bcm53xx/patches-5.10/031-v5.13-0004-ARM-dts-BCM5301X-Set-Linksys-EA9500-power-LED.patch b/target/linux/bcm53xx/patches-5.10/031-v5.13-0004-ARM-dts-BCM5301X-Set-Linksys-EA9500-power-LED.patch
deleted file mode 100644
index 76cb29642289..000000000000
--- a/target/linux/bcm53xx/patches-5.10/031-v5.13-0004-ARM-dts-BCM5301X-Set-Linksys-EA9500-power-LED.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From dcb56d61d5a8acca0a357cc603397bc0272ce4cb Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 29 Mar 2021 10:04:09 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set Linksys EA9500 power LED
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Set Linux default trigger to default on, just like it's normally done
-for power LEDs.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -75,6 +75,7 @@
- 		power {
- 			label = "bcm53xx:white:power";
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
- 		};
- 
- 		wifi-disabled {
diff --git a/target/linux/bcm53xx/patches-5.10/032-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch b/target/linux/bcm53xx/patches-5.10/032-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch
deleted file mode 100644
index 48cceee743ad..000000000000
--- a/target/linux/bcm53xx/patches-5.10/032-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From b660269cba748dfd07eb5551a88ff34d5ea0b86e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 16 Apr 2021 15:37:48 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix NAND nodes names
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches nand-controller.yaml requirements.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -24,8 +24,8 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
--	nand: nand@18028000 {
--		nandcs@0 {
-+	nand_controller: nand-controller@18028000 {
-+		nand@0 {
- 			partitions {
- 				compatible = "fixed-partitions";
- 				#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -25,8 +25,8 @@
- 		      <0x88000000 0x08000000>;
- 	};
- 
--	nand: nand@18028000 {
--		nandcs@0 {
-+	nand_controller: nand-controller@18028000 {
-+		nand@0 {
- 			partitions {
- 				compatible = "fixed-partitions";
- 				#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-@@ -6,8 +6,8 @@
-  */
- 
- / {
--	nand@18028000 {
--		nandcs: nandcs@0 {
-+	nand-controller@18028000 {
-+		nandcs: nand@0 {
- 			compatible = "brcm,nandcs";
- 			reg = <0>;
- 			#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -503,7 +503,7 @@
- 		reg = <0x18004000 0x14>;
- 	};
- 
--	nand: nand@18028000 {
-+	nand_controller: nand-controller@18028000 {
- 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
- 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
- 		reg-names = "nand", "iproc-idm", "iproc-ext";
---- a/arch/arm/boot/dts/bcm953012k.dts
-+++ b/arch/arm/boot/dts/bcm953012k.dts
-@@ -49,8 +49,8 @@
- 	};
- };
- 
--&nand {
--	nandcs@0 {
-+&nand_controller {
-+	nand@0 {
- 		compatible = "brcm,nandcs";
- 		reg = <0>;
- 		nand-on-flash-bbt;
diff --git a/target/linux/bcm53xx/patches-5.10/032-v5.14-0002-ARM-dts-BCM5301X-Fix-pinmux-subnodes-names.patch b/target/linux/bcm53xx/patches-5.10/032-v5.14-0002-ARM-dts-BCM5301X-Fix-pinmux-subnodes-names.patch
deleted file mode 100644
index d8a4f87c3818..000000000000
--- a/target/linux/bcm53xx/patches-5.10/032-v5.14-0002-ARM-dts-BCM5301X-Fix-pinmux-subnodes-names.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From bb95d7d440fefd104c593d9cb20da6d34a474e97 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Apr 2021 11:00:06 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix pinmux subnodes names
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches pinmux-node.yaml requirements.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094.dtsi | 2 +-
- arch/arm/boot/dts/bcm5301x.dtsi | 6 +++---
- 2 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -11,7 +11,7 @@
- &pinctrl {
- 	compatible = "brcm,bcm4709-pinmux";
- 
--	pinmux_mdio: mdio {
-+	pinmux_mdio: mdio-pins {
- 		groups = "mdio_grp";
- 		function = "mdio";
- 	};
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -460,18 +460,18 @@
- 					function = "spi";
- 				};
- 
--				pinmux_i2c: i2c {
-+				pinmux_i2c: i2c-pins {
- 					groups = "i2c_grp";
- 					function = "i2c";
- 				};
- 
--				pinmux_pwm: pwm {
-+				pinmux_pwm: pwm-pins {
- 					groups = "pwm0_grp", "pwm1_grp",
- 						 "pwm2_grp", "pwm3_grp";
- 					function = "pwm";
- 				};
- 
--				pinmux_uart1: uart1 {
-+				pinmux_uart1: uart1-pins {
- 					groups = "uart1_grp";
- 					function = "uart1";
- 				};
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.15-0001-ARM-dts-NSP-add-device-names-to-compatible.patch b/target/linux/bcm53xx/patches-5.10/033-v5.15-0001-ARM-dts-NSP-add-device-names-to-compatible.patch
deleted file mode 100644
index c994953d4dd6..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.15-0001-ARM-dts-NSP-add-device-names-to-compatible.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 465078bfdf5271601f098450ae2fc974865c59fd Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Thu, 10 Jun 2021 21:35:10 +0100
-Subject: [PATCH] ARM: dts: NSP: add device names to compatible
-
-Currently only the SoC type and platform are specified for all NSP
-devices. This patch adds the device names.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm958522er.dts  | 2 +-
- arch/arm/boot/dts/bcm958525er.dts  | 2 +-
- arch/arm/boot/dts/bcm958525xmc.dts | 2 +-
- arch/arm/boot/dts/bcm958622hr.dts  | 2 +-
- arch/arm/boot/dts/bcm958625hr.dts  | 2 +-
- arch/arm/boot/dts/bcm958625k.dts   | 2 +-
- arch/arm/boot/dts/bcm988312hr.dts  | 2 +-
- 7 files changed, 7 insertions(+), 7 deletions(-)
-
---- a/arch/arm/boot/dts/bcm958522er.dts
-+++ b/arch/arm/boot/dts/bcm958522er.dts
-@@ -37,7 +37,7 @@
- 
- / {
- 	model = "NorthStar Plus SVK (BCM958522ER)";
--	compatible = "brcm,bcm58522", "brcm,nsp";
-+	compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp";
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
---- a/arch/arm/boot/dts/bcm958525er.dts
-+++ b/arch/arm/boot/dts/bcm958525er.dts
-@@ -37,7 +37,7 @@
- 
- / {
- 	model = "NorthStar Plus SVK (BCM958525ER)";
--	compatible = "brcm,bcm58525", "brcm,nsp";
-+	compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp";
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
---- a/arch/arm/boot/dts/bcm958525xmc.dts
-+++ b/arch/arm/boot/dts/bcm958525xmc.dts
-@@ -37,7 +37,7 @@
- 
- / {
- 	model = "NorthStar Plus XMC (BCM958525xmc)";
--	compatible = "brcm,bcm58525", "brcm,nsp";
-+	compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp";
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
---- a/arch/arm/boot/dts/bcm958622hr.dts
-+++ b/arch/arm/boot/dts/bcm958622hr.dts
-@@ -37,7 +37,7 @@
- 
- / {
- 	model = "NorthStar Plus SVK (BCM958622HR)";
--	compatible = "brcm,bcm58622", "brcm,nsp";
-+	compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp";
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
---- a/arch/arm/boot/dts/bcm958625hr.dts
-+++ b/arch/arm/boot/dts/bcm958625hr.dts
-@@ -37,7 +37,7 @@
- 
- / {
- 	model = "NorthStar Plus SVK (BCM958625HR)";
--	compatible = "brcm,bcm58625", "brcm,nsp";
-+	compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp";
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
---- a/arch/arm/boot/dts/bcm958625k.dts
-+++ b/arch/arm/boot/dts/bcm958625k.dts
-@@ -36,7 +36,7 @@
- 
- / {
- 	model = "NorthStar Plus SVK (BCM958625K)";
--	compatible = "brcm,bcm58625", "brcm,nsp";
-+	compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp";
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
---- a/arch/arm/boot/dts/bcm988312hr.dts
-+++ b/arch/arm/boot/dts/bcm988312hr.dts
-@@ -37,7 +37,7 @@
- 
- / {
- 	model = "NorthStar Plus SVK (BCM988312HR)";
--	compatible = "brcm,bcm88312", "brcm,nsp";
-+	compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp";
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.15-0002-ARM-dts-NSP-enable-DMA-on-bcm988312hr.patch b/target/linux/bcm53xx/patches-5.10/033-v5.15-0002-ARM-dts-NSP-enable-DMA-on-bcm988312hr.patch
deleted file mode 100644
index d84124d2dd07..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.15-0002-ARM-dts-NSP-enable-DMA-on-bcm988312hr.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 1b90dde4278a7b459979706b572785bc3a10bbb5 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Thu, 10 Jun 2021 21:35:12 +0100
-Subject: [PATCH] ARM: dts: NSP: enable DMA on bcm988312hr
-
-The previous patch "ARM: dts: NSP: Disable PL330 by default, add
-dma-coherent property" set the DMAC to disabled by default, requiring it
-to be manually enabled on each device. The bcm988312hr was mistakenly
-omitted. This patch adds it back.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm988312hr.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/boot/dts/bcm988312hr.dts
-+++ b/arch/arm/boot/dts/bcm988312hr.dts
-@@ -58,6 +58,10 @@
- 
- /* USB 3 support needed to be complete */
- 
-+&dma {
-+	status = "okay";
-+};
-+
- &amac0 {
- 	status = "okay";
- };
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.15-0003-ARM-dts-NSP-disable-qspi-node-by-default.patch b/target/linux/bcm53xx/patches-5.10/033-v5.15-0003-ARM-dts-NSP-disable-qspi-node-by-default.patch
deleted file mode 100644
index e540245b0f15..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.15-0003-ARM-dts-NSP-disable-qspi-node-by-default.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From 091a12b1814142eac16a115dab206f735b5476a9 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Sun, 13 Jun 2021 10:46:34 +0100
-Subject: [PATCH] ARM: dts: NSP: disable qspi node by default
-
-The QSPI bus is enabled by default, however this may not used on all
-devices. This patch disables by default, requiring it to be explicitly
-enabled where required.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm-nsp.dtsi     | 1 +
- arch/arm/boot/dts/bcm958522er.dts  | 1 +
- arch/arm/boot/dts/bcm958525er.dts  | 1 +
- arch/arm/boot/dts/bcm958525xmc.dts | 1 +
- arch/arm/boot/dts/bcm958622hr.dts  | 1 +
- arch/arm/boot/dts/bcm958623hr.dts  | 1 +
- arch/arm/boot/dts/bcm958625hr.dts  | 1 +
- arch/arm/boot/dts/bcm958625k.dts   | 1 +
- arch/arm/boot/dts/bcm988312hr.dts  | 1 +
- 9 files changed, 9 insertions(+)
-
---- a/arch/arm/boot/dts/bcm-nsp.dtsi
-+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
-@@ -310,6 +310,7 @@
- 			num-cs = <2>;
- 			#address-cells = <1>;
- 			#size-cells = <0>;
-+			status = "disabled";
- 		};
- 
- 		xhci: usb@29000 {
---- a/arch/arm/boot/dts/bcm958522er.dts
-+++ b/arch/arm/boot/dts/bcm958522er.dts
-@@ -134,6 +134,7 @@
- };
- 
- &qspi {
-+	status = "okay";
- 	bspi-sel = <0>;
- 	flash: m25p80@0 {
- 		#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm958525er.dts
-+++ b/arch/arm/boot/dts/bcm958525er.dts
-@@ -134,6 +134,7 @@
- };
- 
- &qspi {
-+	status = "okay";
- 	bspi-sel = <0>;
- 	flash: m25p80@0 {
- 		#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm958525xmc.dts
-+++ b/arch/arm/boot/dts/bcm958525xmc.dts
-@@ -150,6 +150,7 @@
- };
- 
- &qspi {
-+	status = "okay";
- 	bspi-sel = <0>;
- 	flash: m25p80@0 {
- 		#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm958622hr.dts
-+++ b/arch/arm/boot/dts/bcm958622hr.dts
-@@ -138,6 +138,7 @@
- };
- 
- &qspi {
-+	status = "okay";
- 	bspi-sel = <0>;
- 	flash: m25p80@0 {
- 		#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm958623hr.dts
-+++ b/arch/arm/boot/dts/bcm958623hr.dts
-@@ -142,6 +142,7 @@
- };
- 
- &qspi {
-+	status = "okay";
- 	bspi-sel = <0>;
- 	flash: m25p80@0 {
- 		#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm958625hr.dts
-+++ b/arch/arm/boot/dts/bcm958625hr.dts
-@@ -149,6 +149,7 @@
- };
- 
- &qspi {
-+	status = "okay";
- 	bspi-sel = <0>;
- 	flash: m25p80@0 {
- 		#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm958625k.dts
-+++ b/arch/arm/boot/dts/bcm958625k.dts
-@@ -153,6 +153,7 @@
- };
- 
- &qspi {
-+	status = "okay";
- 	bspi-sel = <0>;
- 	flash: m25p80@0 {
- 		#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm988312hr.dts
-+++ b/arch/arm/boot/dts/bcm988312hr.dts
-@@ -138,6 +138,7 @@
- };
- 
- &qspi {
-+	status = "okay";
- 	bspi-sel = <0>;
- 	flash: m25p80@0 {
- 		#address-cells = <1>;
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.15-0004-ARM-dts-NSP-add-MDIO-bus-controller-node.patch b/target/linux/bcm53xx/patches-5.10/033-v5.15-0004-ARM-dts-NSP-add-MDIO-bus-controller-node.patch
deleted file mode 100644
index 6164a22c765b..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.15-0004-ARM-dts-NSP-add-MDIO-bus-controller-node.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 236b31b1d84eb0e4f10c5f113a2675529456f919 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Sun, 13 Jun 2021 10:46:36 +0100
-Subject: [PATCH] ARM: dts: NSP: add MDIO bus controller node
-
-This patch adds the node for the MDIO bus controller, present on the NSP
-SoC.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm-nsp.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/bcm-nsp.dtsi
-+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
-@@ -363,6 +363,13 @@
- 			status = "disabled";
- 		};
- 
-+		mdio: mdio@32000 {
-+			compatible = "brcm,iproc-mdio";
-+			reg = <0x32000 0x8>;
-+			#size-cells = <0>;
-+			#address-cells = <1>;
-+		};
-+
- 		rng: rng@33000 {
- 			compatible = "brcm,bcm-nsp-rng";
- 			reg = <0x33000 0x14>;
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.15-0005-ARM-dts-NSP-Move-USB3-PHY-to-internal-MDIO-bus.patch b/target/linux/bcm53xx/patches-5.10/033-v5.15-0005-ARM-dts-NSP-Move-USB3-PHY-to-internal-MDIO-bus.patch
deleted file mode 100644
index b760e0fcf2c8..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.15-0005-ARM-dts-NSP-Move-USB3-PHY-to-internal-MDIO-bus.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 1c615401bddb1be21e1d375aaa071680f40f1ae2 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Sun, 13 Jun 2021 10:46:37 +0100
-Subject: [PATCH] ARM: dts: NSP: Move USB3 PHY to internal MDIO bus
-
-This patch largely replicates Vivek Unune's patch "ARM: dts:
-BCM5301X:Make usb3 phy use mdio phy driver"[1] for the NSP platform,
-whereby we need to create an mdio-mux to facilitate switches
-configured via external MDIO, in this case on the Meraki MX65.
-
-However in doing so, we are creating an overlap with usb3_phy's
-ccb-mii range. To resolve this, usb3_phy should be moved to a child
-node of the internal MDIO bus. The result is heavily based upon Vivek's
-patch. This has also been cross-referenced with Yendapally Reddy's
-earlier work which utilised the subsequently dropped brcm,nsp-usb3-phy
-driver: "[PATCH v2 4/4] arm: dts: nsp: Add USB nodes to device tree"
-[2]. Finally, this change provides conformance to the bcm-ns-usb3-phy
-documentation, utilising the required usb3-dmp-syscon property. Note
-that support for the deprecated ccb-mii bindings has been dropped as of
-"phy: phy-bcm-ns-usb3: drop support for deprecated DT binding"[3].
-
-[1] https://lore.kernel.org/patchwork/patch/933971/
-[2] https://www.spinics.net/lists/arm-kernel/msg555132.html
-[3] https://lore.kernel.org/linux-devicetree/20201113113423.9466-1-zajec5@gmail.com/
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm-nsp.dtsi | 38 +++++++++++++++++++++++++++-------
- 1 file changed, 31 insertions(+), 7 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-nsp.dtsi
-+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
-@@ -370,6 +370,35 @@
- 			#address-cells = <1>;
- 		};
- 
-+		mdio-mux@32000 {
-+			compatible = "mdio-mux-mmioreg";
-+			reg = <0x32000 0x4>;
-+			mux-mask = <0x200>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			mdio-parent-bus = <&mdio>;
-+
-+			mdio_int: mdio@0 {
-+				reg = <0x0>;
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				usb3_phy: usb3-phy@10 {
-+					compatible = "brcm,ns-bx-usb3-phy";
-+					reg = <0x10>;
-+					usb3-dmp-syscon = <&usb3_dmp>;
-+					#phy-cells = <0>;
-+					status = "disabled";
-+				};
-+			};
-+
-+			mdio_ext: mdio@200 {
-+				reg = <0x200>;
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+			};
-+		};
-+
- 		rng: rng@33000 {
- 			compatible = "brcm,bcm-nsp-rng";
- 			reg = <0x33000 0x14>;
-@@ -528,13 +557,8 @@
- 			};
- 		};
- 
--		usb3_phy: usb3-phy@104000 {
--			compatible = "brcm,ns-bx-usb3-phy";
--			reg = <0x104000 0x1000>,
--			      <0x032000 0x1000>;
--			reg-names = "dmp", "ccb-mii";
--			#phy-cells = <0>;
--			status = "disabled";
-+		usb3_dmp: syscon@104000 {
-+			reg = <0x104000 0x1000>;
- 		};
- 	};
- 
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.15-0006-ARM-dts-NSP-Add-common-bindings-for-MX64-MX65.patch b/target/linux/bcm53xx/patches-5.10/033-v5.15-0006-ARM-dts-NSP-Add-common-bindings-for-MX64-MX65.patch
deleted file mode 100644
index aebf62af9b29..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.15-0006-ARM-dts-NSP-Add-common-bindings-for-MX64-MX65.patch
+++ /dev/null
@@ -1,148 +0,0 @@
-From f111016a8293b968f05450fec83020c94d0f88c2 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Fri, 6 Aug 2021 21:44:32 +0100
-Subject: [PATCH] ARM: dts: NSP: Add common bindings for MX64/MX65
-
-These bindings are required for all Meraki MX64/MX65 devices. These
-common bindings include memory (2GB), PWM LEDs, AMAC, I2C (AT24), NAND
-partitions, EHCI, OHCI and pinctrl.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../dts/bcm958625-meraki-mx6x-common.dtsi     | 129 ++++++++++++++++++
- 1 file changed, 129 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
-
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
-@@ -0,0 +1,129 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
-+ *
-+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
-+ */
-+
-+#include "bcm-nsp.dtsi"
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+
-+/ {
-+	pwm-leds {
-+		compatible = "pwm-leds";
-+
-+		led-1 {
-+			function = LED_FUNCTION_INDICATOR;
-+			color = <LED_COLOR_ID_RED>;
-+			pwms = <&pwm 1 50000>;
-+			max-brightness = <255>;
-+		};
-+
-+		led-2 {
-+			function = LED_FUNCTION_INDICATOR;
-+			color = <LED_COLOR_ID_GREEN>;
-+			pwms = <&pwm 2 50000>;
-+			max-brightness = <255>;
-+		};
-+
-+		led-3 {
-+			function = LED_FUNCTION_INDICATOR;
-+			color = <LED_COLOR_ID_BLUE>;
-+			pwms = <&pwm 3 50000>;
-+			max-brightness = <255>;
-+		};
-+	};
-+};
-+
-+&amac2 {
-+	status = "okay";
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	at24@50 {
-+		compatible = "atmel,24c64";
-+		reg = <0x50>;
-+		pagesize = <32>;
-+		read-only;
-+	};
-+};
-+
-+&nand_controller {
-+	nand@0 {
-+		compatible = "brcm,nandcs";
-+		reg = <0>;
-+		nand-on-flash-bbt;
-+
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		nand-ecc-strength = <24>;
-+		nand-ecc-step-size = <1024>;
-+
-+		brcm,nand-oob-sector-size = <27>;
-+
-+		partition@0 {
-+			label = "u-boot";
-+			reg = <0x0 0x80000>;
-+			read-only;
-+		};
-+
-+		partition@80000 {
-+			label = "shmoo";
-+			reg = <0x80000 0x80000>;
-+			read-only;
-+		};
-+
-+		partition@100000 {
-+			label = "bootkernel1";
-+			reg = <0x100000 0x300000>;
-+		};
-+
-+		partition@400000 {
-+			label = "nvram";
-+			reg = <0x400000 0x100000>;
-+		};
-+
-+		partition@500000 {
-+			label = "bootkernel2";
-+			reg = <0x500000 0x300000>;
-+		};
-+
-+		partition@800000 {
-+			label = "ubi";
-+			reg = <0x800000 0x3f700000>;
-+		};
-+	};
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&pinctrl {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pwm_leds>;
-+
-+	pwm_leds: pwm_leds {
-+		function = "pwm";
-+		groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
-+	};
-+};
-+
-+&pwm {
-+	status = "okay";
-+	#pwm-cells = <2>;
-+};
-+
-+&uart0 {
-+	clock-frequency = <62500000>;
-+	status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.15-0007-ARM-dts-NSP-Add-Ax-stepping-modifications.patch b/target/linux/bcm53xx/patches-5.10/033-v5.15-0007-ARM-dts-NSP-Add-Ax-stepping-modifications.patch
deleted file mode 100644
index 39a69bd9a816..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.15-0007-ARM-dts-NSP-Add-Ax-stepping-modifications.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 2addf9266a1d0f4ba59c9868b3effcd50de441a4 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Fri, 6 Aug 2021 21:44:33 +0100
-Subject: [PATCH] ARM: dts: NSP: Add Ax stepping modifications
-
-While uncommon, some Ax NSP SoCs exist in the wild. This stepping
-requires a modified secondary CPU boot-reg and removal of DMA coherency
-properties. Without these modifications, the secondary CPU will be
-inactive and many peripherals will exhibit undefined behaviour.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm-nsp-ax.dtsi | 70 +++++++++++++++++++++++++++++++
- 1 file changed, 70 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
-
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm-nsp-ax.dtsi
-@@ -0,0 +1,70 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Broadcom Northstar Plus Ax stepping-specific bindings.
-+ * Notable differences from B0+ are the secondary-boot-reg and
-+ * lack of DMA coherency.
-+ */
-+
-+&cpu1 {
-+	secondary-boot-reg = <0xffff042c>;
-+};
-+
-+&dma {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&sdio {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&amac0 {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&amac1 {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&amac2 {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&ehci0 {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&mailbox {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&xhci {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&ehci0 {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&ohci0 {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&i2c0 {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&sata {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&pcie0 {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&pcie1 {
-+	/delete-property/ dma-coherent;
-+};
-+
-+&pcie2 {
-+	/delete-property/ dma-coherent;
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.15-0008-ARM-dts-NSP-Add-DT-files-for-Meraki-MX64-series.patch b/target/linux/bcm53xx/patches-5.10/033-v5.15-0008-ARM-dts-NSP-Add-DT-files-for-Meraki-MX64-series.patch
deleted file mode 100644
index 8fec1ca29f22..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.15-0008-ARM-dts-NSP-Add-DT-files-for-Meraki-MX64-series.patch
+++ /dev/null
@@ -1,340 +0,0 @@
-From 3f902645280baf0d7dab57c227cc14f43edb45ef Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Fri, 6 Aug 2021 21:44:34 +0100
-Subject: [PATCH] ARM: dts: NSP: Add DT files for Meraki MX64 series
-
-MX64 & MX64W Hardware info:
-  - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
-  - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
-  - Storage: 1 GB (Micron MT29F8G08ABACA)
-  - Networking: BCM58625 internal switch (5x 1GbE ports)
-  - USB: 1x USB2.0
-  - Serial: Internal header
-  - WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus
-
-This patch adds the Meraki MX64 series-specific bindings. Since some
-devices make use of the older A0 SoC, changes need to be made to
-accommodate this case, including removal of coherency options and
-modification to the secondary-boot-reg.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile                    |   4 +
- .../boot/dts/bcm958625-meraki-kingpin.dtsi    | 163 ++++++++++++++++++
- .../arm/boot/dts/bcm958625-meraki-mx64-a0.dts |  25 +++
- arch/arm/boot/dts/bcm958625-meraki-mx64.dts   |  24 +++
- .../boot/dts/bcm958625-meraki-mx64w-a0.dts    |  33 ++++
- arch/arm/boot/dts/bcm958625-meraki-mx64w.dts  |  32 ++++
- 6 files changed, 281 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
- create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
- create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
- create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
- create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -159,6 +159,10 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
- 	bcm958525xmc.dtb \
- 	bcm958622hr.dtb \
- 	bcm958623hr.dtb \
-+	bcm958625-meraki-mx64.dtb \
-+	bcm958625-meraki-mx64-a0.dtb \
-+	bcm958625-meraki-mx64w.dtb \
-+	bcm958625-meraki-mx64w-a0.dtb \
- 	bcm958625hr.dtb \
- 	bcm988312hr.dtb \
- 	bcm958625k.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
-@@ -0,0 +1,163 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
-+ *
-+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
-+ */
-+
-+#include "bcm958625-meraki-mx6x-common.dtsi"
-+
-+/ {
-+
-+	keys {
-+		compatible = "gpio-keys-polled";
-+		autorepeat;
-+		poll-interval = <20>;
-+
-+		reset {
-+			label = "reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led-0 {
-+			/* green:lan1-left */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <0>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-1 {
-+			/* green:lan1-right */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <1>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-2 {
-+			/* green:lan2-left */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <2>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-3 {
-+			/* green:lan2-right */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <3>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-4 {
-+			/* green:lan3-left */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <4>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-5 {
-+			/* green:lan3-right */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <5>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-6 {
-+			/* green:lan4-left */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <6>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-7 {
-+			/* green:lan4-right */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <7>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-8 {
-+			/* green:wan-left */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <8>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-9 {
-+			/* green:wan-right */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <9>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-a {
-+			/* amber:power */
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
-+			default-state = "on";
-+		};
-+
-+		led-b {
-+			/* white:status */
-+			function = LED_FUNCTION_STATUS;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+};
-+
-+&srab {
-+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "lan1";
-+			reg = <0>;
-+		};
-+
-+		port@1 {
-+			label = "lan2";
-+			reg = <1>;
-+		};
-+
-+		port@2 {
-+			label = "lan3";
-+			reg = <2>;
-+		};
-+
-+		port@3 {
-+			label = "lan4";
-+			reg = <3>;
-+		};
-+
-+		port@4 {
-+			label = "wan";
-+			reg = <4>;
-+		};
-+
-+		port@8 {
-+			ethernet = <&amac2>;
-+			reg = <8>;
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
-@@ -0,0 +1,25 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
-+ *
-+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm958625-meraki-kingpin.dtsi"
-+#include "bcm-nsp-ax.dtsi"
-+
-+/ {
-+	model = "Cisco Meraki MX64(A0)";
-+	compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@60000000 {
-+		device_type = "memory";
-+		reg = <0x60000000 0x80000000>;
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
-@@ -0,0 +1,24 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
-+ *
-+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm958625-meraki-kingpin.dtsi"
-+
-+/ {
-+	model = "Cisco Meraki MX64";
-+	compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@60000000 {
-+		device_type = "memory";
-+		reg = <0x60000000 0x80000000>;
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
-@@ -0,0 +1,33 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
-+ *
-+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm958625-meraki-kingpin.dtsi"
-+#include "bcm-nsp-ax.dtsi"
-+
-+/ {
-+	model = "Cisco Meraki MX64W(A0)";
-+	compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@60000000 {
-+		device_type = "memory";
-+		reg = <0x60000000 0x80000000>;
-+	};
-+};
-+
-+&pcie0 {
-+	status = "okay";
-+};
-+
-+&pcie1 {
-+	status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
-@@ -0,0 +1,32 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
-+ *
-+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm958625-meraki-kingpin.dtsi"
-+
-+/ {
-+	model = "Cisco Meraki MX64W";
-+	compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@60000000 {
-+		device_type = "memory";
-+		reg = <0x60000000 0x80000000>;
-+	};
-+};
-+
-+&pcie0 {
-+	status = "okay";
-+};
-+
-+&pcie1 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.15-0009-ARM-dts-NSP-Add-DT-files-for-Meraki-MX65-series.patch b/target/linux/bcm53xx/patches-5.10/033-v5.15-0009-ARM-dts-NSP-Add-DT-files-for-Meraki-MX65-series.patch
deleted file mode 100644
index 6b473911abe7..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.15-0009-ARM-dts-NSP-Add-DT-files-for-Meraki-MX65-series.patch
+++ /dev/null
@@ -1,386 +0,0 @@
-From 702a8f4744ed5b480f2b2411858184afdb10f9fd Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Fri, 6 Aug 2021 21:44:35 +0100
-Subject: [PATCH] ARM: dts: NSP: Add DT files for Meraki MX65 series
-
-MX65 & MX65W Hardware info:
-  - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
-  - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
-  - Storage: 1 GB (Micron MT29F8G08ABACA)
-  - Networking: BCM58625 switch (2x 1GbE ports)
-    2x Qualcomm QCA8337 switches (10x 1GbE ports total)
-  - PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
-  - USB: 1x USB2.0
-  - Serial: Internal header
-  - WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.
-
-Note that a driver and firmware image for the BCM59111 PSE has been
-released under GPL, but this is not present in the kernel.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile                    |   2 +
- arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
- arch/arm/boot/dts/bcm958625-meraki-mx65.dts   |  24 ++
- arch/arm/boot/dts/bcm958625-meraki-mx65w.dts  |  32 ++
- 4 files changed, 337 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
- create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
- create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -163,6 +163,8 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
- 	bcm958625-meraki-mx64-a0.dtb \
- 	bcm958625-meraki-mx64w.dtb \
- 	bcm958625-meraki-mx64w-a0.dtb \
-+	bcm958625-meraki-mx65.dtb \
-+	bcm958625-meraki-mx65w.dtb \
- 	bcm958625hr.dtb \
- 	bcm988312hr.dtb \
- 	bcm958625k.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
-@@ -0,0 +1,279 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
-+ *
-+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
-+ */
-+
-+#include "bcm958625-meraki-mx6x-common.dtsi"
-+
-+/ {
-+	keys {
-+		compatible = "gpio-keys-polled";
-+		autorepeat;
-+		poll-interval = <20>;
-+
-+		reset {
-+			label = "reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led-0 {
-+			/* green:wan1-left */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <0>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-1 {
-+			/* green:wan1-right */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <1>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-2 {
-+			/* green:wan2-left */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <2>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-3 {
-+			/* green:wan2-right */
-+			function = LED_FUNCTION_ACTIVITY;
-+			function-enumerator = <3>;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-4 {
-+			/* amber:power */
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
-+			default-state = "on";
-+		};
-+
-+		led-5 {
-+			/* white:status */
-+			function = LED_FUNCTION_STATUS;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	mdio-mii-mux {
-+		compatible = "mdio-mux-mmioreg";
-+		reg = <0x1803f1c0 0x4>;
-+		mux-mask = <0x2000>;
-+		mdio-parent-bus = <&mdio_ext>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		mdio@0 {
-+			reg = <0x0>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			phy_port6: phy@0 {
-+				reg = <0>;
-+			};
-+
-+			phy_port7: phy@1 {
-+				reg = <1>;
-+			};
-+
-+			phy_port8: phy@2 {
-+				reg = <2>;
-+			};
-+
-+			phy_port9: phy@3 {
-+				reg = <3>;
-+			};
-+
-+			phy_port10: phy@4 {
-+				reg = <4>;
-+			};
-+
-+			switch@10 {
-+				compatible = "qca,qca8337";
-+				reg = <0x10>;
-+				dsa,member = <1 0>;
-+
-+				ports {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					port@0 {
-+						reg = <0>;
-+						ethernet = <&sgmii1>;
-+						phy-mode = "sgmii";
-+						fixed-link {
-+							speed = <1000>;
-+							full-duplex;
-+						};
-+					};
-+
-+					port@1 {
-+						reg = <1>;
-+						label = "lan8";
-+						phy-handle = <&phy_port6>;
-+					};
-+
-+					port@2 {
-+						reg = <2>;
-+						label = "lan9";
-+						phy-handle = <&phy_port7>;
-+					};
-+
-+					port@3 {
-+						reg = <3>;
-+						label = "lan10";
-+						phy-handle = <&phy_port8>;
-+					};
-+
-+					port@4 {
-+						reg = <4>;
-+						label = "lan11";
-+						phy-handle = <&phy_port9>;
-+					};
-+
-+					port@5 {
-+						reg = <5>;
-+						label = "lan12";
-+						phy-handle = <&phy_port10>;
-+					};
-+				};
-+			};
-+		};
-+
-+		mdio-mii@2000 {
-+			reg = <0x2000>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			phy_port1: phy@0 {
-+				reg = <0>;
-+			};
-+
-+			phy_port2: phy@1 {
-+				reg = <1>;
-+			};
-+
-+			phy_port3: phy@2 {
-+				reg = <2>;
-+			};
-+
-+			phy_port4: phy@3 {
-+				reg = <3>;
-+			};
-+
-+			phy_port5: phy@4 {
-+				reg = <4>;
-+			};
-+
-+			switch@10 {
-+				compatible = "qca,qca8337";
-+				reg = <0x10>;
-+				dsa,member = <2 0>;
-+
-+				ports {
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					port@0 {
-+						reg = <0>;
-+						ethernet = <&sgmii0>;
-+						phy-mode = "sgmii";
-+						fixed-link {
-+							speed = <1000>;
-+							full-duplex;
-+						};
-+					};
-+
-+					port@1 {
-+						reg = <1>;
-+						label = "lan3";
-+						phy-handle = <&phy_port1>;
-+					};
-+
-+					port@2 {
-+						reg = <2>;
-+						label = "lan4";
-+						phy-handle = <&phy_port2>;
-+					};
-+
-+					port@3 {
-+						reg = <3>;
-+						label = "lan5";
-+						phy-handle = <&phy_port3>;
-+					};
-+
-+					port@4 {
-+						reg = <4>;
-+						label = "lan6";
-+						phy-handle = <&phy_port4>;
-+					};
-+
-+					port@5 {
-+						reg = <5>;
-+						label = "lan7";
-+						phy-handle = <&phy_port5>;
-+					};
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&srab {
-+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
-+	status = "okay";
-+	dsa,member = <0 0>;
-+
-+	ports {
-+		port@0 {
-+			label = "wan1";
-+			reg = <0>;
-+		};
-+
-+		port@1 {
-+			label = "wan2";
-+			reg = <1>;
-+		};
-+
-+		sgmii0: port@4 {
-+			label = "sw0";
-+			reg = <4>;
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+
-+		sgmii1: port@5 {
-+			label = "sw1";
-+			reg = <5>;
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+
-+		port@8 {
-+			ethernet = <&amac2>;
-+			reg = <8>;
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
-@@ -0,0 +1,24 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device Tree Bindings for Cisco Meraki MX65.
-+ *
-+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm958625-meraki-alamo.dtsi"
-+
-+/ {
-+	model = "Cisco Meraki MX65";
-+	compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@60000000 {
-+		device_type = "memory";
-+		reg = <0x60000000 0x80000000>;
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
-@@ -0,0 +1,32 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device Tree Bindings for Cisco Meraki MX65W.
-+ *
-+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm958625-meraki-alamo.dtsi"
-+
-+/ {
-+	model = "Cisco Meraki MX65W";
-+	compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory@60000000 {
-+		device_type = "memory";
-+		reg = <0x60000000 0x80000000>;
-+	};
-+};
-+
-+&pcie0 {
-+	status = "okay";
-+};
-+
-+&pcie1 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.15-0010-ARM-dts-BCM5301X-Fix-nodes-names.patch b/target/linux/bcm53xx/patches-5.10/033-v5.15-0010-ARM-dts-BCM5301X-Fix-nodes-names.patch
deleted file mode 100644
index e779d4564530..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.15-0010-ARM-dts-BCM5301X-Fix-nodes-names.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 0e89c0d8e8edece7f8e4607841ca6651885d23b1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 08:57:00 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix nodes names
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes following errors for all BCM5301X dts files:
-chipcommonA@18000000: $nodename:0: 'chipcommonA@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
-mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
-mdio-bus-mux@18003000: $nodename:0: 'mdio-bus-mux@18003000' does not match '^mdio-mux[\\-@]?'
-dmu@1800c000: $nodename:0: 'dmu@1800c000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 2 +-
- arch/arm/boot/dts/bcm5301x.dtsi                 | 8 ++++----
- 2 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -129,7 +129,7 @@
- 		};
- 	};
- 
--	mdio-bus-mux@18003000 {
-+	mdio-mux@18003000 {
- 
- 		/* BIT(9) = 1 => external mdio */
- 		mdio@200 {
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -19,7 +19,7 @@
- 	#size-cells = <1>;
- 	interrupt-parent = <&gic>;
- 
--	chipcommonA@18000000 {
-+	chipcommon-a-bus@18000000 {
- 		compatible = "simple-bus";
- 		ranges = <0x00000000 0x18000000 0x00001000>;
- 		#address-cells = <1>;
-@@ -44,7 +44,7 @@
- 		};
- 	};
- 
--	mpcore@19000000 {
-+	mpcore-bus@19000000 {
- 		compatible = "simple-bus";
- 		ranges = <0x00000000 0x19000000 0x00023000>;
- 		#address-cells = <1>;
-@@ -371,7 +371,7 @@
- 		#address-cells = <1>;
- 	};
- 
--	mdio-bus-mux@18003000 {
-+	mdio-mux@18003000 {
- 		compatible = "mdio-mux-mmioreg";
- 		mdio-parent-bus = <&mdio>;
- 		#address-cells = <1>;
-@@ -417,7 +417,7 @@
- 		status = "disabled";
- 	};
- 
--	dmu@1800c000 {
-+	dmu-bus@1800c000 {
- 		compatible = "simple-bus";
- 		ranges = <0 0x1800c000 0x1000>;
- 		#address-cells = <1>;
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.15-0011-ARM-dts-BCM5301X-Fix-MDIO-mux-binding.patch b/target/linux/bcm53xx/patches-5.10/033-v5.15-0011-ARM-dts-BCM5301X-Fix-MDIO-mux-binding.patch
deleted file mode 100644
index dc20720dbd36..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.15-0011-ARM-dts-BCM5301X-Fix-MDIO-mux-binding.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 75a5646c26895c4cfadc8d54aa53ac5455947895 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 08:57:01 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix MDIO mux binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes following error for all BCM5301X dts files:
-mdio-bus-mux@18003000: compatible: ['mdio-mux-mmioreg'] is too short
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -372,7 +372,7 @@
- 	};
- 
- 	mdio-mux@18003000 {
--		compatible = "mdio-mux-mmioreg";
-+		compatible = "mdio-mux-mmioreg", "mdio-mux";
- 		mdio-parent-bus = <&mdio>;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.16-0013-ARM-dts-NSP-Add-bcm958623hr-board-name-to-dts.patch b/target/linux/bcm53xx/patches-5.10/033-v5.16-0013-ARM-dts-NSP-Add-bcm958623hr-board-name-to-dts.patch
deleted file mode 100644
index c5f28474e372..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.16-0013-ARM-dts-NSP-Add-bcm958623hr-board-name-to-dts.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 695717eb4c61173d05a277e37132b5e2c6531bf1 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Sun, 29 Aug 2021 22:37:47 +0000
-Subject: [PATCH] ARM: dts: NSP: Add bcm958623hr board name to dts
-
-This board was previously added to
-Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
-however the dts file was not updated to reflect this change. This patch
-corrects bcm958623hr.dts by adding the board name to the compatible.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm958623hr.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm958623hr.dts
-+++ b/arch/arm/boot/dts/bcm958623hr.dts
-@@ -37,7 +37,7 @@
- 
- / {
- 	model = "NorthStar Plus SVK (BCM958623HR)";
--	compatible = "brcm,bcm58623", "brcm,nsp";
-+	compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.16-0015-ARM-dts-NSP-Fix-MDIO-mux-node-names.patch b/target/linux/bcm53xx/patches-5.10/033-v5.16-0015-ARM-dts-NSP-Fix-MDIO-mux-node-names.patch
deleted file mode 100644
index a7c0f167196b..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.16-0015-ARM-dts-NSP-Fix-MDIO-mux-node-names.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 38f8111369f318a538e9d4d89d8e48030c22fb40 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Sun, 29 Aug 2021 22:37:49 +0000
-Subject: [PATCH] ARM: dts: NSP: Fix MDIO mux node names
-
-While functional, the mdio-mux-mmioreg binding does not conform to
-Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml in that an
-mdio-mux compatible is also required. Without this the following output
-is observed when running dtbs_check:
-
-mdio-mux@32000: compatible: ['mdio-mux-mmioreg'] is too short
-
-This change brings conformance to this requirement and corresponds
-likewise to Rafal Milecki's change to the BCM5301x platform[1].
-
-[1] https://lore.kernel.org/linux-arm-kernel/20210822191256.3715003-1-f.fainelli@gmail.com/T/
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm-nsp.dtsi                | 2 +-
- arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-nsp.dtsi
-+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
-@@ -371,7 +371,7 @@
- 		};
- 
- 		mdio-mux@32000 {
--			compatible = "mdio-mux-mmioreg";
-+			compatible = "mdio-mux-mmioreg", "mdio-mux";
- 			reg = <0x32000 0x4>;
- 			mux-mask = <0x200>;
- 			#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
-+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
-@@ -72,7 +72,7 @@
- 	};
- 
- 	mdio-mii-mux {
--		compatible = "mdio-mux-mmioreg";
-+		compatible = "mdio-mux-mmioreg", "mdio-mux";
- 		reg = <0x1803f1c0 0x4>;
- 		mux-mask = <0x2000>;
- 		mdio-parent-bus = <&mdio_ext>;
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.16-0016-ARM-dts-NSP-Fix-MX64-MX65-eeprom-node-name.patch b/target/linux/bcm53xx/patches-5.10/033-v5.16-0016-ARM-dts-NSP-Fix-MX64-MX65-eeprom-node-name.patch
deleted file mode 100644
index 4cffad1f4edd..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.16-0016-ARM-dts-NSP-Fix-MX64-MX65-eeprom-node-name.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 56e4e548427240d85fd220460d0ab5987e1dec00 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Sun, 29 Aug 2021 22:37:50 +0000
-Subject: [PATCH] ARM: dts: NSP: Fix MX64/MX65 eeprom node name
-
-Running dtbs_check yields the following message when checking the
-MX64/MX65 devicetree:
-at24@50: $nodename:0: 'at24@50' does not match '^eeprom@[0-9a-f]{1,2}$'
-
-This patch fixes the issue by renaming the at24 node appropriately.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
-+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
-@@ -48,7 +48,7 @@
- &i2c0 {
- 	status = "okay";
- 
--	at24@50 {
-+	eeprom@50 {
- 		compatible = "atmel,24c64";
- 		reg = <0x50>;
- 		pagesize = <32>;
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.16-0017-ARM-dts-NSP-Fix-MX65-MDIO-mux-warnings.patch b/target/linux/bcm53xx/patches-5.10/033-v5.16-0017-ARM-dts-NSP-Fix-MX65-MDIO-mux-warnings.patch
deleted file mode 100644
index cad73886855d..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.16-0017-ARM-dts-NSP-Fix-MX65-MDIO-mux-warnings.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From f5fc9044e5d45a4d97b5240c8723f4677f647c9f Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Sun, 29 Aug 2021 22:37:51 +0000
-Subject: [PATCH] ARM: dts: NSP: Fix MX65 MDIO mux warnings
-
-The naming of this node is based upon that of the initial EA9500 dts[1].
-However this does not conform with the mdio-mux format, yielding the
-following message when running dtbs_check:
-mdio-mii-mux: $nodename:0: 'mdio-mii-mux' does not match '^mdio-mux[\\-@]?'
-
-Secondly, this node should be moved to within the axi node and given the
-appropriate unit address. This also requires exposing the axi node via a
-label in bcm-nsp.dtsi. This fixes the following warning:
-Warning (unit_address_vs_reg): /mdio-mii-mux: node has a reg or ranges property, but no unit name
-
-[1]https://patchwork.ozlabs.org/project/linux-imx/patch/20180618174159.86150-1-npcomplete13@gmail.com/#1941353
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm-nsp.dtsi                | 2 +-
- arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 6 ++++--
- 2 files changed, 5 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-nsp.dtsi
-+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
-@@ -166,7 +166,7 @@
- 		};
- 	};
- 
--	axi@18000000 {
-+	axi: axi@18000000 {
- 		compatible = "simple-bus";
- 		ranges = <0x00000000 0x18000000 0x0011c40c>;
- 		#address-cells = <1>;
---- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
-+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
-@@ -70,10 +70,12 @@
- 			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
- 		};
- 	};
-+};
- 
--	mdio-mii-mux {
-+&axi {
-+	mdio-mux@3f1c0 {
- 		compatible = "mdio-mux-mmioreg", "mdio-mux";
--		reg = <0x1803f1c0 0x4>;
-+		reg = <0x3f1c0 0x4>;
- 		mux-mask = <0x2000>;
- 		mdio-parent-bus = <&mdio_ext>;
- 		#address-cells = <1>;
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.16-0018-ARM-dts-BCM5301X-Specify-switch-ports-for-more-devic.patch b/target/linux/bcm53xx/patches-5.10/033-v5.16-0018-ARM-dts-BCM5301X-Specify-switch-ports-for-more-devic.patch
deleted file mode 100644
index b309771369d7..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.16-0018-ARM-dts-BCM5301X-Specify-switch-ports-for-more-devic.patch
+++ /dev/null
@@ -1,290 +0,0 @@
-From 225ffaf3d0e00daa2d0c7b68e8fd731ebbde3c03 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 7 Sep 2021 08:00:48 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify switch ports for more devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Those are remaining models I have that didn't have ports yet. All
-tested.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts   | 37 ++++++++++++++++
- .../boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 37 ++++++++++++++++
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts   | 42 +++++++++++++++++++
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 42 +++++++++++++++++++
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 37 ++++++++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 37 ++++++++++++++++
- 6 files changed, 232 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -94,3 +94,40 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan4";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan3";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan1";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -117,3 +117,40 @@
- 		};
- 	};
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -187,3 +187,45 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@8 {
-+			reg = <8>;
-+			label = "cpu";
-+			ethernet = <&gmac2>;
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -118,3 +118,45 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan4";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan3";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan1";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@8 {
-+			reg = <8>;
-+			label = "cpu";
-+			ethernet = <&gmac2>;
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -68,3 +68,40 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan4";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan2";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "lan1";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -68,3 +68,40 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan4";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan2";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "lan1";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.16-0019-ARM-dts-BCM53573-Describe-on-SoC-BCM53125-rev-4-swit.patch b/target/linux/bcm53xx/patches-5.10/033-v5.16-0019-ARM-dts-BCM53573-Describe-on-SoC-BCM53125-rev-4-swit.patch
deleted file mode 100644
index 3a5438c22824..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.16-0019-ARM-dts-BCM53573-Describe-on-SoC-BCM53125-rev-4-swit.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 9fb90ae6cae7f8fe4fbf626945f32cd9da2c3892 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 20 Sep 2021 16:10:23 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM53573 family SoC have Ethernet switch connected to the first Ethernet
-controller (accessible over MDIO).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53573.dtsi | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -180,6 +180,24 @@
- 
- 		gmac0: ethernet@5000 {
- 			reg = <0x5000 0x1000>;
-+
-+			mdio {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				switch: switch@1e {
-+					compatible = "brcm,bcm53125";
-+					reg = <0x1e>;
-+
-+					status = "disabled";
-+
-+					/* ports are defined in board DTS */
-+					ports {
-+						#address-cells = <1>;
-+						#size-cells = <0>;
-+					};
-+				};
-+			};
- 		};
- 
- 		gmac1: ethernet@b000 {
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.16-0020-ARM-dts-BCM53573-Add-Tenda-AC9-switch-ports.patch b/target/linux/bcm53xx/patches-5.10/033-v5.16-0020-ARM-dts-BCM53573-Add-Tenda-AC9-switch-ports.patch
deleted file mode 100644
index c6d995723c9d..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.16-0020-ARM-dts-BCM53573-Add-Tenda-AC9-switch-ports.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 64612828628cca6e3992e421f45c242dc6625647 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 20 Sep 2021 16:10:24 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Add Tenda AC9 switch ports
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This router has 1 WAN and 4 LAN ports.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 37 ++++++++++++++++++++++++
- 1 file changed, 37 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -105,3 +105,40 @@
- 		};
- 	};
- };
-+
-+&switch {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "lan4";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.16-0021-ARM-BCM53016-Specify-switch-ports-for-Meraki-MR32.patch b/target/linux/bcm53xx/patches-5.10/033-v5.16-0021-ARM-BCM53016-Specify-switch-ports-for-Meraki-MR32.patch
deleted file mode 100644
index 35f697c66f59..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.16-0021-ARM-BCM53016-Specify-switch-ports-for-Meraki-MR32.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 6abc4ca5a28070945e0d68cb4160b309bfbf4b8b Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 18 Sep 2021 19:29:30 +0200
-Subject: [PATCH] ARM: BCM53016: Specify switch ports for Meraki MR32
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-the switch identifies itself as a BCM53012 (rev 5)...
-This patch has been tested & verified on OpenWrt's
-snapshot with Linux 5.10 (didn't test any older kernels).
-The MR32 is able to "talk to the network" as before with
-OpenWrt's SWITCHDEV b53 driver.
-
-| b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5
-| libphy: dsa slave smi: probed
-| b53-srab-switch 18007000.ethernet-switch poe (uninitialized):
-|	PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
-| b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks.
-|	Please migrate to PHYLINK!
-| DSA: tree 0 setup
-
-Reported-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 22 ++++++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -217,3 +217,25 @@
- 		};
- 	};
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "poe";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+
-+			fixed-link {
-+				speed = <1000>;
-+				duplex-full;
-+			};
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.16-0022-ARM-BCM53016-MR32-get-mac-address-from-nvmem.patch b/target/linux/bcm53xx/patches-5.10/033-v5.16-0022-ARM-BCM53016-MR32-get-mac-address-from-nvmem.patch
deleted file mode 100644
index 70a18822a92c..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.16-0022-ARM-BCM53016-MR32-get-mac-address-from-nvmem.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 477ffdbdf389cc91294d66e251cc6f856da5820c Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 18 Sep 2021 19:29:31 +0200
-Subject: [PATCH] ARM: BCM53016: MR32: get mac-address from nvmem
-
-The MAC-Address of the MR32's sole ethernet port is
-located in offset 0x66 of the attached AT24C64 eeprom.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -110,6 +110,12 @@
- 			reg = <0x50>;
- 			pagesize = <32>;
- 			read-only;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			mac_address: mac-address@66 {
-+				reg = <0x66 0x6>;
-+			};
- 		};
- 	};
- };
-@@ -133,6 +139,11 @@
- 	 */
- };
- 
-+&gmac0 {
-+	nvmem-cell-names = "mac-address";
-+	nvmem-cells = <&mac_address>;
-+};
-+
- &gmac1 {
- 	status = "disabled";
- };
diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.16-0023-ARM-dts-BCM5301X-Add-DT-for-Asus-RT-AC88U.patch b/target/linux/bcm53xx/patches-5.10/033-v5.16-0023-ARM-dts-BCM5301X-Add-DT-for-Asus-RT-AC88U.patch
deleted file mode 100644
index 70955269f65d..000000000000
--- a/target/linux/bcm53xx/patches-5.10/033-v5.16-0023-ARM-dts-BCM5301X-Add-DT-for-Asus-RT-AC88U.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-From beff77b93452cd2057c859694709dd34a181488f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Tue, 21 Sep 2021 20:19:01 +0800
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Asus RT-AC88U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Hardware Info
--------------
-
-Processor	- Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
-Switch		- BCM53012 in BCM4709C0KFEBG & external RTL8365MB
-DDR3 RAM	- 512 MB
-Flash		- 128 MB (ESMT F59L1G81LA-25T)
-2.4GHz		- BCM4366 4×4 2.4/5G single chip 802.11ac SoC
-5GHz		- BCM4366 4×4 2.4/5G single chip 802.11ac SoC
-Ports		- 8 Ports, 1 WAN Ports
-
-Tested on OpenWrt on kernel 5.10 built with DSA driver.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile                   |   1 +
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 200 +++++++++++++++++++
- 2 files changed, 201 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4709-netgear-r7000.dtb \
- 	bcm4709-netgear-r8000.dtb \
- 	bcm4709-tplink-archer-c9-v1.dtb \
-+	bcm47094-asus-rt-ac88u.dtb \
- 	bcm47094-dlink-dir-885l.dtb \
- 	bcm47094-linksys-panamera.dtb \
- 	bcm47094-luxul-abr-4500.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -0,0 +1,200 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright (C) 2021 Arınç ÜNAL <arinc.unal@arinc9.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+	compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
-+	model = "Asus RT-AC88U";
-+
-+	chosen {
-+		bootargs = "earlycon";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x18000000>;
-+	};
-+
-+	nvram@1c080000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1c080000 0x00180000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		power {
-+			label = "white:power";
-+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		wan-red {
-+			label = "red:wan";
-+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		lan {
-+			label = "white:lan";
-+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		usb2 {
-+			label = "white:usb2";
-+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&ehci_port2>;
-+			linux,default-trigger = "usbport";
-+		};
-+
-+		usb3 {
-+			label = "white:usb3";
-+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&ehci_port1>, <&xhci_port1>;
-+			linux,default-trigger = "usbport";
-+		};
-+
-+		wps {
-+			label = "white:wps";
-+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		reset {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		wifi {
-+			label = "Wi-Fi";
-+			linux,code = <KEY_RFKILL>;
-+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led {
-+			label = "Backlight";
-+			linux,code = <KEY_BRIGHTNESS_ZERO>;
-+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&srab {
-+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-+	status = "okay";
-+	dsa,member = <0 0>;
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@0 {
-+			reg = <0>;
-+			label = "lan4";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan3";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan1";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		sw0_p5: port@5 {
-+			reg = <5>;
-+			label = "extsw";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+
-+		port@7 {
-+			reg = <7>;
-+			ethernet = <&gmac1>;
-+			label = "cpu";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+
-+		port@8 {
-+			reg = <8>;
-+			ethernet = <&gmac2>;
-+			label = "cpu";
-+			status = "disabled";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+	};
-+};
-+
-+&usb2 {
-+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3_phy {
-+	status = "okay";
-+};
-+
-+&nandcs {
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "boot";
-+			reg = <0x00000000 0x00080000>;
-+			read-only;
-+		};
-+
-+		partition@80000 {
-+			label = "nvram";
-+			reg = <0x00080000 0x00180000>;
-+		};
-+
-+		partition@200000 {
-+			label = "firmware";
-+			reg = <0x00200000 0x07e00000>;
-+			compatible = "brcm,trx";
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0001-ARM-dts-NSP-MX65-add-qca8k-falling-edge-PLL-properti.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0001-ARM-dts-NSP-MX65-add-qca8k-falling-edge-PLL-properti.patch
deleted file mode 100644
index a0be1eda4d8c..000000000000
--- a/target/linux/bcm53xx/patches-5.10/034-v5.17-0001-ARM-dts-NSP-MX65-add-qca8k-falling-edge-PLL-properti.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 58d3d07985c1adab31a3ed76360d016bb1c5b358 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Fri, 15 Oct 2021 23:50:22 +0100
-Subject: [PATCH] ARM: dts: NSP: MX65: add qca8k falling-edge, PLL properties
-
-This patch enables two properties for the QCA8337 switches on the MX65.
-
-Set the SGMII transmit clock to falling edge
-"qca,sgmii-txclk-falling-edge" to conform to the OEM configuration [1].
-
-The new explicit PLL enable option "qca,sgmii-enable-pll" is required
-[2].
-
-[1] https://git.kernel.org/netdev/net-next/c/6c43809bf1be
-[2] https://git.kernel.org/netdev/net-next/c/bbc4799e8bb6
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
-+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
-@@ -118,6 +118,8 @@
- 						reg = <0>;
- 						ethernet = <&sgmii1>;
- 						phy-mode = "sgmii";
-+						qca,sgmii-enable-pll;
-+						qca,sgmii-txclk-falling-edge;
- 						fixed-link {
- 							speed = <1000>;
- 							full-duplex;
-@@ -194,6 +196,8 @@
- 						reg = <0>;
- 						ethernet = <&sgmii0>;
- 						phy-mode = "sgmii";
-+						qca,sgmii-enable-pll;
-+						qca,sgmii-txclk-falling-edge;
- 						fixed-link {
- 							speed = <1000>;
- 							full-duplex;
diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0002-ARM-dts-BCM5301X-remove-unnecessary-address-size-cel.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0002-ARM-dts-BCM5301X-remove-unnecessary-address-size-cel.patch
deleted file mode 100644
index 3c3725adecb9..000000000000
--- a/target/linux/bcm53xx/patches-5.10/034-v5.17-0002-ARM-dts-BCM5301X-remove-unnecessary-address-size-cel.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 835992e7eca4b29a87c204cefff2f7863fd087f3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Wed, 27 Oct 2021 00:57:03 +0800
-Subject: [PATCH] ARM: dts: BCM5301X: remove unnecessary address & size cells
- from Asus RT-AC88U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Remove the unnecessary #address-cells & #size-cells in the gpio-keys node
-from the device tree of Asus RT-AC88U.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -68,8 +68,6 @@
- 
- 	gpio-keys {
- 		compatible = "gpio-keys";
--		#address-cells = <1>;
--		#size-cells = <0>;
- 
- 		wps {
- 			label = "WPS";
diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0003-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0003-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch
deleted file mode 100644
index 562d5a22c73a..000000000000
--- a/target/linux/bcm53xx/patches-5.10/034-v5.17-0003-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From b6c99228c8edc5e67d8229ba1c5f76cce210ddfc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Wed, 27 Oct 2021 00:57:06 +0800
-Subject: [PATCH] ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Define the Realtek RTL8365MB switch without interrupt support on the device
-tree of Asus RT-AC88U.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Acked-by: Alvin Å ipraga <alsi@bang-olufsen.dk>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 77 ++++++++++++++++++++
- 1 file changed, 77 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -93,6 +93,83 @@
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- 		};
- 	};
-+
-+	switch {
-+		compatible = "realtek,rtl8365mb";
-+		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
-+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+		realtek,disable-leds;
-+		dsa,member = <1 0>;
-+
-+		ports {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0>;
-+
-+			port@0 {
-+				reg = <0>;
-+				label = "lan5";
-+				phy-handle = <&ethphy0>;
-+			};
-+
-+			port@1 {
-+				reg = <1>;
-+				label = "lan6";
-+				phy-handle = <&ethphy1>;
-+			};
-+
-+			port@2 {
-+				reg = <2>;
-+				label = "lan7";
-+				phy-handle = <&ethphy2>;
-+			};
-+
-+			port@3 {
-+				reg = <3>;
-+				label = "lan8";
-+				phy-handle = <&ethphy3>;
-+			};
-+
-+			port@6 {
-+				reg = <6>;
-+				label = "cpu";
-+				ethernet = <&sw0_p5>;
-+				phy-mode = "rgmii";
-+				tx-internal-delay-ps = <2000>;
-+				rx-internal-delay-ps = <2000>;
-+
-+				fixed-link {
-+					speed = <1000>;
-+					full-duplex;
-+					pause;
-+				};
-+			};
-+		};
-+
-+		mdio {
-+			compatible = "realtek,smi-mdio";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			ethphy0: ethernet-phy@0 {
-+				reg = <0>;
-+			};
-+
-+			ethphy1: ethernet-phy@1 {
-+				reg = <1>;
-+			};
-+
-+			ethphy2: ethernet-phy@2 {
-+				reg = <2>;
-+			};
-+
-+			ethphy3: ethernet-phy@3 {
-+				reg = <3>;
-+			};
-+		};
-+	};
- };
- 
- &srab {
diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0004-ARM-BCM53016-MR32-convert-to-Broadcom-iProc-I2C-Driv.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0004-ARM-BCM53016-MR32-convert-to-Broadcom-iProc-I2C-Driv.patch
deleted file mode 100644
index 6118e98cc5aa..000000000000
--- a/target/linux/bcm53xx/patches-5.10/034-v5.17-0004-ARM-BCM53016-MR32-convert-to-Broadcom-iProc-I2C-Driv.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From de7880016665afe7fa7d40e1fafa859260d53ba1 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Thu, 28 Oct 2021 09:03:44 +0200
-Subject: [PATCH] ARM: BCM53016: MR32: convert to Broadcom iProc I2C Driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-replaces the bit-banged i2c-gpio provided i2c functionality
-with the hardware in the SoC.
-
-During review of the MR32, Florian Fainelli pointed out that the
-SoC has a real I2C-controller. Furthermore, the connected pins
-(SDA and SCL) would line up perfectly for use. Back then I couldn't
-get it working though and I left it with i2c-gpio (which worked).
-
-Now we know the reason: the interrupt was incorrectly specified.
-(Hence, this patch depends on Florian Fainelli's
-"ARM: dts: BCM5301X: Fix I2C controller interrupt" patch).
-
-Cc: Florian Fainelli <f.fainelli@gmail.com>
-Cc: Rafał Miłecki <zajec5@gmail.com>
-Cc: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 62 ++++++++++------------
- 1 file changed, 28 insertions(+), 34 deletions(-)
-
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -84,40 +84,6 @@
- 			max-brightness = <255>;
- 		};
- 	};
--
--	i2c {
--		/*
--		 * The platform provided I2C does not budge.
--		 * This is a replacement until I can figure
--		 * out what are the missing bits...
--		 */
--
--		compatible = "i2c-gpio";
--		sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
--		scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
--		i2c-gpio,delay-us = <10>; /* close to 100 kHz */
--		#address-cells = <1>;
--		#size-cells = <0>;
--
--		current_sense: ina219@45 {
--			compatible = "ti,ina219";
--			reg = <0x45>;
--			shunt-resistor = <60000>; /* = 60 mOhms */
--		};
--
--		eeprom: eeprom@50 {
--			compatible = "atmel,24c64";
--			reg = <0x50>;
--			pagesize = <32>;
--			read-only;
--			#address-cells = <1>;
--			#size-cells = <1>;
--
--			mac_address: mac-address@66 {
--				reg = <0x66 0x6>;
--			};
--		};
--	};
- };
- 
- &uart0 {
-@@ -250,3 +216,31 @@
- 		};
- 	};
- };
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinmux_i2c>;
-+
-+	clock-frequency = <100000>;
-+
-+	current_sense: ina219@45 {
-+		compatible = "ti,ina219";
-+		reg = <0x45>;
-+		shunt-resistor = <60000>; /* = 60 mOhms */
-+	};
-+
-+	eeprom: eeprom@50 {
-+		compatible = "atmel,24c64";
-+		reg = <0x50>;
-+		pagesize = <32>;
-+		read-only;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		mac_address: mac-address@66 {
-+			reg = <0x66 0x6>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0005-ARM-dts-BCM5301X-update-CRU-block-description.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0005-ARM-dts-BCM5301X-update-CRU-block-description.patch
deleted file mode 100644
index 0a817e8fd1a8..000000000000
--- a/target/linux/bcm53xx/patches-5.10/034-v5.17-0005-ARM-dts-BCM5301X-update-CRU-block-description.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 31fd9b79dc580301c53a001482755ba7e88c2809 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 29 Oct 2021 18:05:23 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: update CRU block description
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This describes CRU in a way matching documentation and fixes:
-
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: cru@100: $nodename:0: 'cru@100' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
-        From schema: /lib/python3.6/site-packages/dtschema/schemas/simple-bus.yaml
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -423,14 +423,14 @@
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 
--		cru@100 {
--			compatible = "simple-bus";
-+		cru-bus@100 {
-+			compatible = "brcm,ns-cru", "simple-mfd";
- 			reg = <0x100 0x1a4>;
- 			ranges;
- 			#address-cells = <1>;
- 			#size-cells = <1>;
- 
--			lcpll0: lcpll0@100 {
-+			lcpll0: clock-controller@100 {
- 				#clock-cells = <1>;
- 				compatible = "brcm,nsp-lcpll0";
- 				reg = <0x100 0x14>;
-@@ -439,7 +439,7 @@
- 						     "sdio", "ddr_phy";
- 			};
- 
--			genpll: genpll@140 {
-+			genpll: clock-controller@140 {
- 				#clock-cells = <1>;
- 				compatible = "brcm,nsp-genpll";
- 				reg = <0x140 0x24>;
-@@ -450,6 +450,11 @@
- 						     "sata1", "sata2";
- 			};
- 
-+			syscon@180 {
-+				compatible = "brcm,cru-clkset", "syscon";
-+				reg = <0x180 0x4>;
-+			};
-+
- 			pinctrl: pin-controller@1c0 {
- 				compatible = "brcm,bcm4708-pinmux";
- 				reg = <0x1c0 0x24>;
diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0006-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0006-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch
deleted file mode 100644
index e01927bedfef..000000000000
--- a/target/linux/bcm53xx/patches-5.10/034-v5.17-0006-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 1a46061a2a4130a08841941ce6dcaa32be2ce312 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 23 Nov 2021 10:03:33 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The new binding covers a single reg and uses syscon to reference shared
-register.
-
-References: 55b9b741712d ("dt-bindings: phy: brcm,ns-usb2-phy: bind just a PHY block")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 20 ++++++++++----------
- 1 file changed, 10 insertions(+), 10 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -148,15 +148,6 @@
- 		};
- 	};
- 
--	usb2_phy: usb2-phy@1800c000 {
--		compatible = "brcm,ns-usb2-phy";
--		reg = <0x1800c000 0x1000>;
--		reg-names = "dmu";
--		#phy-cells = <0>;
--		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
--		clock-names = "phy-ref-clk";
--	};
--
- 	axi@18000000 {
- 		compatible = "brcm,bus-axi";
- 		reg = <0x18000000 0x1000>;
-@@ -450,7 +441,16 @@
- 						     "sata1", "sata2";
- 			};
- 
--			syscon@180 {
-+			usb2_phy: phy@164 {
-+				compatible = "brcm,ns-usb2-phy";
-+				reg = <0x164 0x4>;
-+				brcm,syscon-clkset = <&cru_clkset>;
-+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-+				clock-names = "phy-ref-clk";
-+				#phy-cells = <0>;
-+			};
-+
-+			cru_clkset: syscon@180 {
- 				compatible = "brcm,cru-clkset", "syscon";
- 				reg = <0x180 0x4>;
- 			};
diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0007-ARM-dts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0007-ARM-dts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch
deleted file mode 100644
index 730b989808ab..000000000000
--- a/target/linux/bcm53xx/patches-5.10/034-v5.17-0007-ARM-dts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 69c4e53bdd055ecc27761f6971a50c631ff9072e Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Thu, 2 Dec 2021 15:16:27 -0800
-Subject: [PATCH] ARM: dts: NSP: Fixed iProc PCIe MSI sub-node
-
-Rename the msi controller unit name to 'msi' to avoid collisions with
-the 'msi-controller' boolean property.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm-nsp.dtsi | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-nsp.dtsi
-+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
-@@ -587,7 +587,7 @@
- 		status = "disabled";
- 
- 		msi-parent = <&msi0>;
--		msi0: msi-controller {
-+		msi0: msi {
- 			compatible = "brcm,iproc-msi";
- 			msi-controller;
- 			interrupt-parent = <&gic>;
-@@ -624,7 +624,7 @@
- 		status = "disabled";
- 
- 		msi-parent = <&msi1>;
--		msi1: msi-controller {
-+		msi1: msi {
- 			compatible = "brcm,iproc-msi";
- 			msi-controller;
- 			interrupt-parent = <&gic>;
-@@ -661,7 +661,7 @@
- 		status = "disabled";
- 
- 		msi-parent = <&msi2>;
--		msi2: msi-controller {
-+		msi2: msi {
- 			compatible = "brcm,iproc-msi";
- 			msi-controller;
- 			interrupt-parent = <&gic>;
diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0008-ARM-dts-NSP-Rename-SATA-unit-name.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0008-ARM-dts-NSP-Rename-SATA-unit-name.patch
deleted file mode 100644
index fd90fbf1f68a..000000000000
--- a/target/linux/bcm53xx/patches-5.10/034-v5.17-0008-ARM-dts-NSP-Rename-SATA-unit-name.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 9a68c53f875e88edd3403c001ad85f4ac0ed3486 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Tue, 7 Dec 2021 10:19:09 -0800
-Subject: [PATCH] ARM: dts: NSP: Rename SATA unit name
-
-Rename the SATA controller unit name from ahci to sata in preparation
-for adding the Broadcom SATA3 controller YAML binding which will bring
-validation.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm-nsp.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm-nsp.dtsi
-+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
-@@ -534,7 +534,7 @@
- 			};
- 		};
- 
--		sata: ahci@41000 {
-+		sata: sata@41000 {
- 			compatible = "brcm,bcm-nsp-ahci";
- 			reg-names = "ahci", "top-ctrl";
- 			reg = <0x41000 0x1000>, <0x40020 0x1c>;
diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0009-ARM-dts-BCM5301X-correct-RX-delay-and-enable-flow-co.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0009-ARM-dts-BCM5301X-correct-RX-delay-and-enable-flow-co.patch
deleted file mode 100644
index e81ec169b983..000000000000
--- a/target/linux/bcm53xx/patches-5.10/034-v5.17-0009-ARM-dts-BCM5301X-correct-RX-delay-and-enable-flow-co.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 5e33f1c4a7cb914a003a304ab8eef705b17aabb7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 17 Dec 2021 00:03:19 +0800
-Subject: [PATCH] ARM: dts: BCM5301X: correct RX delay and enable flow control
- on Asus RT-AC88U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The current 'rx-internal-delay-ps' property value on the Realtek switch
-node, 2000, will be divided by 300, resulting in 6.66, which will be
-rounded to the closest step value, 7. Change it to 2100 to be accurate.
-See ef136837aaf6 ("net: dsa: rtl8365mb: set RGMII RX delay in steps of
-0.3 ns") for reference.
-
-Flow control needs to be enabled on both sides of the internal and
-external switch. It is already enabled on the CPU port of the Realtek
-switch so we also enable it on the external switch port of the Broadcom
-switch as well.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -138,7 +138,7 @@
- 				ethernet = <&sw0_p5>;
- 				phy-mode = "rgmii";
- 				tx-internal-delay-ps = <2000>;
--				rx-internal-delay-ps = <2000>;
-+				rx-internal-delay-ps = <2100>;
- 
- 				fixed-link {
- 					speed = <1000>;
-@@ -213,6 +213,7 @@
- 			fixed-link {
- 				speed = <1000>;
- 				full-duplex;
-+				pause;
- 			};
- 		};
- 
diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0010-Revert-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-A.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0010-Revert-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-A.patch
deleted file mode 100644
index 3d814b1252e1..000000000000
--- a/target/linux/bcm53xx/patches-5.10/034-v5.17-0010-Revert-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-A.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From 8b0c59c622dc4dab970ec63264fb5b152944ac80 Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Thu, 23 Dec 2021 00:17:17 +0100
-Subject: [PATCH] Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus
- RT-AC88U"
-
-This reverts commit 3d2d52a0d1835b56f6bd67d268f6c39df0e41692, it caused
-a build regression:
-
-arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:109.4-14: Warning (reg_format): /switch/ports:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
-arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
-arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
-arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
-arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
-arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #address-cells value
-arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #size-cells value
-
-Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 77 --------------------
- 1 file changed, 77 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -93,83 +93,6 @@
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- 		};
- 	};
--
--	switch {
--		compatible = "realtek,rtl8365mb";
--		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
--		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
--		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
--		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
--		realtek,disable-leds;
--		dsa,member = <1 0>;
--
--		ports {
--			#address-cells = <1>;
--			#size-cells = <0>;
--			reg = <0>;
--
--			port@0 {
--				reg = <0>;
--				label = "lan5";
--				phy-handle = <&ethphy0>;
--			};
--
--			port@1 {
--				reg = <1>;
--				label = "lan6";
--				phy-handle = <&ethphy1>;
--			};
--
--			port@2 {
--				reg = <2>;
--				label = "lan7";
--				phy-handle = <&ethphy2>;
--			};
--
--			port@3 {
--				reg = <3>;
--				label = "lan8";
--				phy-handle = <&ethphy3>;
--			};
--
--			port@6 {
--				reg = <6>;
--				label = "cpu";
--				ethernet = <&sw0_p5>;
--				phy-mode = "rgmii";
--				tx-internal-delay-ps = <2000>;
--				rx-internal-delay-ps = <2100>;
--
--				fixed-link {
--					speed = <1000>;
--					full-duplex;
--					pause;
--				};
--			};
--		};
--
--		mdio {
--			compatible = "realtek,smi-mdio";
--			#address-cells = <1>;
--			#size-cells = <0>;
--
--			ethphy0: ethernet-phy@0 {
--				reg = <0>;
--			};
--
--			ethphy1: ethernet-phy@1 {
--				reg = <1>;
--			};
--
--			ethphy2: ethernet-phy@2 {
--				reg = <2>;
--			};
--
--			ethphy3: ethernet-phy@3 {
--				reg = <3>;
--			};
--		};
--	};
- };
- 
- &srab {
diff --git a/target/linux/bcm53xx/patches-5.10/035-v5.18-0001-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch b/target/linux/bcm53xx/patches-5.10/035-v5.18-0001-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch
deleted file mode 100644
index 77d3420ff871..000000000000
--- a/target/linux/bcm53xx/patches-5.10/035-v5.18-0001-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From 441d531ec9b766f49e01c107a3043235daa4493f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Sun, 2 Jan 2022 23:33:04 +0300
-Subject: [PATCH] ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Define the Realtek RTL8365MB switch without interrupt support on the device
-tree of Asus RT-AC88U.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Acked-by: Alvin Å ipraga <alsi@bang-olufsen.dk>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 76 ++++++++++++++++++++
- 1 file changed, 76 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -93,6 +93,82 @@
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- 		};
- 	};
-+
-+	switch {
-+		compatible = "realtek,rtl8365mb";
-+		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
-+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+		realtek,disable-leds;
-+		dsa,member = <1 0>;
-+
-+		ports {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			port@0 {
-+				reg = <0>;
-+				label = "lan5";
-+				phy-handle = <&ethphy0>;
-+			};
-+
-+			port@1 {
-+				reg = <1>;
-+				label = "lan6";
-+				phy-handle = <&ethphy1>;
-+			};
-+
-+			port@2 {
-+				reg = <2>;
-+				label = "lan7";
-+				phy-handle = <&ethphy2>;
-+			};
-+
-+			port@3 {
-+				reg = <3>;
-+				label = "lan8";
-+				phy-handle = <&ethphy3>;
-+			};
-+
-+			port@6 {
-+				reg = <6>;
-+				label = "cpu";
-+				ethernet = <&sw0_p5>;
-+				phy-mode = "rgmii";
-+				tx-internal-delay-ps = <2000>;
-+				rx-internal-delay-ps = <2100>;
-+
-+				fixed-link {
-+					speed = <1000>;
-+					full-duplex;
-+					pause;
-+				};
-+			};
-+		};
-+
-+		mdio {
-+			compatible = "realtek,smi-mdio";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			ethphy0: ethernet-phy@0 {
-+				reg = <0>;
-+			};
-+
-+			ethphy1: ethernet-phy@1 {
-+				reg = <1>;
-+			};
-+
-+			ethphy2: ethernet-phy@2 {
-+				reg = <2>;
-+			};
-+
-+			ethphy3: ethernet-phy@3 {
-+				reg = <3>;
-+			};
-+		};
-+	};
- };
- 
- &srab {
diff --git a/target/linux/bcm53xx/patches-5.10/035-v5.18-0002-ARM-dts-NSP-MX6X-get-mac-address-from-eeprom.patch b/target/linux/bcm53xx/patches-5.10/035-v5.18-0002-ARM-dts-NSP-MX6X-get-mac-address-from-eeprom.patch
deleted file mode 100644
index 19cf1fe9523f..000000000000
--- a/target/linux/bcm53xx/patches-5.10/035-v5.18-0002-ARM-dts-NSP-MX6X-get-mac-address-from-eeprom.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 66848aff05f669e95795b5f3a163f4762781333e Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Wed, 23 Feb 2022 23:50:39 +0000
-Subject: [PATCH] ARM: dts: NSP: MX6X: get mac-address from eeprom
-
-The MAC address on the MX64/MX65 series is located on the AT24 EEPROM.
-This is the same as other Meraki devices such as the MR32 [1].
-
-[1] https://lore.kernel.org/linux-arm-kernel/fa8271d02ef74a687f365cebe5c55ec846963ab7.1631986106.git.chunkeey@gmail.com/
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
-+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
-@@ -39,6 +39,8 @@
- 
- &amac2 {
- 	status = "okay";
-+	nvmem-cells = <&mac_address>;
-+	nvmem-cell-names = "mac-address";
- };
- 
- &ehci0 {
-@@ -53,6 +55,12 @@
- 		reg = <0x50>;
- 		pagesize = <32>;
- 		read-only;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		mac_address: mac-address@66 {
-+			reg = <0x66 0x6>;
-+		};
- 	};
- };
- 
diff --git a/target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch b/target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch
deleted file mode 100644
index 2da45ff9da63..000000000000
--- a/target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 482c85c7fc95c572d368b2214b9e9d2c4a2e5789 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Wed, 23 Feb 2022 23:50:40 +0000
-Subject: [PATCH] ARM: dts: NSP: MX6X: correct LED function types
-
-Currently, the amber LED will remain always on. This is due to a
-misinterpretation of the LED sub-node properties, where-by "default-state"
-was used to indicate the initial state when powering on the device. When in
-use, however, this resulted in the amber LED always being on. Instead change
-this to only indicate a fault state.
-
-Assign LED_FUNCTION_POWER to the green PWM LED.
-
-These changes bring the MX64/65 in line with the MR32's devicetree.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi       | 3 +--
- arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi     | 3 +--
- arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi | 2 +-
- 3 files changed, 3 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
-+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
-@@ -57,10 +57,9 @@
- 
- 		led-4 {
- 			/* amber:power */
--			function = LED_FUNCTION_POWER;
-+			function = LED_FUNCTION_FAULT;
- 			color = <LED_COLOR_ID_AMBER>;
- 			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
--			default-state = "on";
- 		};
- 
- 		led-5 {
---- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
-+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
-@@ -106,10 +106,9 @@
- 
- 		led-a {
- 			/* amber:power */
--			function = LED_FUNCTION_POWER;
-+			function = LED_FUNCTION_FAULT;
- 			color = <LED_COLOR_ID_AMBER>;
- 			gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
--			default-state = "on";
- 		};
- 
- 		led-b {
---- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
-+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
-@@ -22,7 +22,7 @@
- 		};
- 
- 		led-2 {
--			function = LED_FUNCTION_INDICATOR;
-+			function = LED_FUNCTION_POWER;
- 			color = <LED_COLOR_ID_GREEN>;
- 			pwms = <&pwm 2 50000>;
- 			max-brightness = <255>;
diff --git a/target/linux/bcm53xx/patches-5.10/035-v5.18-0004-ARM-dts-BCM5301X-Add-Ethernet-MAC-address-to-Luxul-X.patch b/target/linux/bcm53xx/patches-5.10/035-v5.18-0004-ARM-dts-BCM5301X-Add-Ethernet-MAC-address-to-Luxul-X.patch
deleted file mode 100644
index c70fbc398bfa..000000000000
--- a/target/linux/bcm53xx/patches-5.10/035-v5.18-0004-ARM-dts-BCM5301X-Add-Ethernet-MAC-address-to-Luxul-X.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From c8442f0fb09ca3d842b9b23d1d0650f649fd10f8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 28 Feb 2022 10:52:07 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Add Ethernet MAC address to Luxul
- XWR-3150
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Luxul XWR-3150 stores MAC as NVRAM variable. Add NVMEM cell for it and
-reference it in the Ethernet interface node.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -25,6 +25,9 @@
- 	nvram@1eff0000 {
- 		compatible = "brcm,nvram";
- 		reg = <0x1eff0000 0x10000>;
-+
-+		et0macaddr: et0macaddr {
-+		};
- 	};
- 
- 	leds {
-@@ -72,6 +75,11 @@
- 	};
- };
- 
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &usb3 {
- 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0001-ARM-dts-BCM5301X-Update-pin-controller-node-name.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0001-ARM-dts-BCM5301X-Update-pin-controller-node-name.patch
deleted file mode 100644
index 690abb92704d..000000000000
--- a/target/linux/bcm53xx/patches-5.10/036-v5.19-0001-ARM-dts-BCM5301X-Update-pin-controller-node-name.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 130b5e32ba9d2d2313e39cf3f6d0729bff02b76a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 30 Mar 2022 14:05:27 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Update pin controller node name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes:
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: cru-bus@100: 'pin-controller@1c0' does not match any of the regexes: '^clock-controller@[a-f0-9]+$', '^phy@[a-f0-9]+$', '^pinctrl@[a-f0-9]+$', '^syscon@[a-f0-9]+$', '^thermal@[a-f0-9]+$'
-        From schema: Documentation/devicetree/bindings/mfd/brcm,cru.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
-        From schema: Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
-
-Ref: e7391b021e3f ("dt-bindings: mfd: brcm,cru: Rename pinctrl node")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -455,7 +455,7 @@
- 				reg = <0x180 0x4>;
- 			};
- 
--			pinctrl: pin-controller@1c0 {
-+			pinctrl: pinctrl@1c0 {
- 				compatible = "brcm,bcm4708-pinmux";
- 				reg = <0x1c0 0x24>;
- 				reg-names = "cru_gpio_control";
diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0002-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-node.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0002-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-node.patch
deleted file mode 100644
index e61fef8aabdc..000000000000
--- a/target/linux/bcm53xx/patches-5.10/036-v5.19-0002-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-node.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 90103611d573c5c238350f9b1d7cb682c62f5681 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Apr 2022 13:19:58 +0300
-Subject: [PATCH] ARM: dts: BCM5301X: Fix DTC warning for NAND node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Remove the unnecessary #address-cells and #size-cells properties on the
-nand@0 node to fix the warning below.
-
-Warning (avoid_unnecessary_addr_size): /nand-controller@18028000/nand@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-@@ -10,8 +10,6 @@
- 		nandcs: nand@0 {
- 			compatible = "brcm,nandcs";
- 			reg = <0>;
--			#address-cells = <1>;
--			#size-cells = <1>;
- 
- 			partitions {
- 				compatible = "brcm,bcm947xx-cfe-partitions";
diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0003-ARM-dts-BCM5301X-Remove-cell-properties-from-srab-po.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0003-ARM-dts-BCM5301X-Remove-cell-properties-from-srab-po.patch
deleted file mode 100644
index 6ef8720b1d5e..000000000000
--- a/target/linux/bcm53xx/patches-5.10/036-v5.19-0003-ARM-dts-BCM5301X-Remove-cell-properties-from-srab-po.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From e5ff0a7aab3ef5dd8ec7636b936c95179aa5ddfa Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Apr 2022 13:19:59 +0300
-Subject: [PATCH] ARM: dts: BCM5301X: Remove cell properties from srab ports on
- Asus RT-AC88U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Remove #address-cells and #size-cells properties from the ports node of
-&srab. They are already defined on bcm5301x.dtsi, there's no need to define
-them again.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 5 +----
- 1 file changed, 1 insertion(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -1,6 +1,6 @@
- // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
-- * Copyright (C) 2021 Arınç ÜNAL <arinc.unal@arinc9.com>
-+ * Copyright (C) 2021-2022 Arınç ÜNAL <arinc.unal@arinc9.com>
-  */
- 
- /dts-v1/;
-@@ -177,9 +177,6 @@
- 	dsa,member = <0 0>;
- 
- 	ports {
--		#address-cells = <1>;
--		#size-cells = <0>;
--
- 		port@0 {
- 			reg = <0>;
- 			label = "lan4";
diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0004-ARM-dts-BCM5301X-Add-rgmii-to-port-5-of-Broadcom-swi.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0004-ARM-dts-BCM5301X-Add-rgmii-to-port-5-of-Broadcom-swi.patch
deleted file mode 100644
index aa192b3a118f..000000000000
--- a/target/linux/bcm53xx/patches-5.10/036-v5.19-0004-ARM-dts-BCM5301X-Add-rgmii-to-port-5-of-Broadcom-swi.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 4b7a67420a34ebd8fbf0111221a8bfd8001d418d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Apr 2022 13:20:00 +0300
-Subject: [PATCH] ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on
- Asus RT-AC88U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Define phy-mode of the Broadcom switch's port@5 as rgmii. This doesn't seem
-to matter but let's explicitly define it since phy-mode as rgmii is defined
-on the other side which is port@6 of the Realtek switch.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -205,6 +205,7 @@
- 		sw0_p5: port@5 {
- 			reg = <5>;
- 			label = "extsw";
-+			phy-mode = "rgmii";
- 
- 			fixed-link {
- 				speed = <1000>;
diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0005-ARM-dts-BCM5301X-Retrieve-gmac1-MAC-address-from-NVR.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0005-ARM-dts-BCM5301X-Retrieve-gmac1-MAC-address-from-NVR.patch
deleted file mode 100644
index 4c0858be0a71..000000000000
--- a/target/linux/bcm53xx/patches-5.10/036-v5.19-0005-ARM-dts-BCM5301X-Retrieve-gmac1-MAC-address-from-NVR.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 7f7f8c7b9f3cbae1355fb3b0ce4ea9d6f1552521 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Apr 2022 13:20:01 +0300
-Subject: [PATCH] ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on
- Asus RT-AC88U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The et1macaddr NVRAM variable contains a MAC address for gmac1 on Asus
-RT-AC88U. Add NVMEM cell for it and reference it in the gmac1 node.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -25,6 +25,9 @@
- 	nvram@1c080000 {
- 		compatible = "brcm,nvram";
- 		reg = <0x1c080000 0x00180000>;
-+
-+		et1macaddr: et1macaddr {
-+		};
- 	};
- 
- 	leds {
-@@ -239,6 +242,11 @@
- 	};
- };
- 
-+&gmac1 {
-+	nvmem-cells = <&et1macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &usb2 {
- 	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- };
diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0006-ARM-dts-BCM5301X-Fix-compatible-strings-for-BCM53012.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0006-ARM-dts-BCM5301X-Fix-compatible-strings-for-BCM53012.patch
deleted file mode 100644
index 59e99dae6261..000000000000
--- a/target/linux/bcm53xx/patches-5.10/036-v5.19-0006-ARM-dts-BCM5301X-Fix-compatible-strings-for-BCM53012.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 69bb5c6f3f41fe6baa86a775c8a3e69dd27f85d6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Sat, 2 Apr 2022 23:46:21 +0300
-Subject: [PATCH] ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and
- BCM53016 SoC
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Fix compatible strings for devicetrees using the BCM53012 and BCM53016 SoC.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +-
- arch/arm/boot/dts/bcm953012er.dts          | 2 +-
- arch/arm/boot/dts/bcm953012hr.dts          | 2 +-
- arch/arm/boot/dts/bcm953012k.dts           | 2 +-
- 4 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -13,7 +13,7 @@
- #include <dt-bindings/leds/common.h>
- 
- / {
--	compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708";
-+	compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708";
- 	model = "Meraki MR32";
- 
- 	chosen {
---- a/arch/arm/boot/dts/bcm953012er.dts
-+++ b/arch/arm/boot/dts/bcm953012er.dts
-@@ -37,7 +37,7 @@
- 
- / {
- 	model = "NorthStar Enterprise Router (BCM953012ER)";
--	compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
-+	compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708";
- 
- 	memory@0 {
- 		device_type = "memory";
---- a/arch/arm/boot/dts/bcm953012hr.dts
-+++ b/arch/arm/boot/dts/bcm953012hr.dts
-@@ -37,7 +37,7 @@
- 
- / {
- 	model = "NorthStar HR (BCM953012HR)";
--	compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
-+	compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708";
- 
- 	aliases {
- 		ethernet0 = &gmac0;
---- a/arch/arm/boot/dts/bcm953012k.dts
-+++ b/arch/arm/boot/dts/bcm953012k.dts
-@@ -36,7 +36,7 @@
- 
- / {
- 	model = "NorthStar SVK (BCM953012K)";
--	compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
-+	compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708";
- 
- 	aliases {
- 		serial0 = &uart0;
diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0007-ARM-dts-BCM5301X-Disable-gmac0-and-enable-port-8-on-.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0007-ARM-dts-BCM5301X-Disable-gmac0-and-enable-port-8-on-.patch
deleted file mode 100644
index f75a53777f3f..000000000000
--- a/target/linux/bcm53xx/patches-5.10/036-v5.19-0007-ARM-dts-BCM5301X-Disable-gmac0-and-enable-port-8-on-.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From b9cff8783439ff1803709128af3a0e04c5f5f047 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Sun, 10 Apr 2022 12:44:55 +0300
-Subject: [PATCH] ARM: dts: BCM5301X: Disable gmac0 and enable port@8 on Asus
- RT-AC88U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Disable gmac0 which is not connected to any switch MAC. Enable port@8 of
-the Broadcom switch which is connected to gmac2.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -232,7 +232,6 @@
- 			reg = <8>;
- 			ethernet = <&gmac2>;
- 			label = "cpu";
--			status = "disabled";
- 
- 			fixed-link {
- 				speed = <1000>;
-@@ -242,6 +241,10 @@
- 	};
- };
- 
-+&gmac0 {
-+	status = "disabled";
-+};
-+
- &gmac1 {
- 	nvmem-cells = <&et1macaddr>;
- 	nvmem-cell-names = "mac-address";
diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0008-ARM-dts-BCM5301X-Add-DT-for-WZR-1166DHP-DHP2.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0008-ARM-dts-BCM5301X-Add-DT-for-WZR-1166DHP-DHP2.patch
deleted file mode 100644
index bce497bba7dd..000000000000
--- a/target/linux/bcm53xx/patches-5.10/036-v5.19-0008-ARM-dts-BCM5301X-Add-DT-for-WZR-1166DHP-DHP2.patch
+++ /dev/null
@@ -1,300 +0,0 @@
-From 417aea4436bb658d8c5c4dcd0e3c255931d0ee96 Mon Sep 17 00:00:00 2001
-From: SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
-Date: Fri, 22 Apr 2022 00:10:54 +0900
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2
-
-Buffalo WZR-1166DHP/WZR-1166DHP2  wireless router with
-
-    - BCM4708A0
-    - 128MiB NAND flash
-    - 2T2R 11ac/a/b/g/n Wi-Fi
-    - 4x 10/100/1000M ethernet switch
-    - 1x USB 3.0 port
-
-  WZR-1166DHP and WZR-1166DHP2 have different memory capacity.
-
-  WZR-1166DHP
-    - 512 MiB DDR2 SDRAM
-
-  WZR-1166DHP2
-    - 256 MiB DDR2 SDRAM
-
-  These hardware components are very similar to the WZR-1750DHP
-   except for the number of antennas.
-
-Signed-off-by: SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile                    |   2 +
- .../bcm4708-buffalo-wzr-1166dhp-common.dtsi   | 192 ++++++++++++++++++
- .../boot/dts/bcm4708-buffalo-wzr-1166dhp.dts  |  26 +++
- .../boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts |  26 +++
- 4 files changed, 246 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
- create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
- create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -99,6 +99,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4708-asus-rt-ac56u.dtb \
- 	bcm4708-asus-rt-ac68u.dtb \
- 	bcm4708-buffalo-wzr-1750dhp.dtb \
-+	bcm4708-buffalo-wzr-1166dhp.dtb \
-+	bcm4708-buffalo-wzr-1166dhp2.dtb \
- 	bcm4708-linksys-ea6300-v1.dtb \
- 	bcm4708-linksys-ea6500-v2.dtb \
- 	bcm4708-luxul-xap-1510.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-@@ -0,0 +1,192 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2
-+ *
-+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
-+ */
-+
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+#include <dt-bindings/leds/common.h>
-+
-+/ {
-+	spi {
-+		compatible = "spi-gpio";
-+		num-chipselects = <1>;
-+		gpio-sck = <&chipcommon 7 0>;
-+		gpio-mosi = <&chipcommon 4 0>;
-+		cs-gpios = <&chipcommon 6 0>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		hc595: gpio_spi@0 {
-+			compatible = "fairchild,74hc595";
-+			reg = <0>;
-+			registers-number = <1>;
-+			spi-max-frequency = <100000>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		usb {
-+			/* label = "bcm53xx:blue:usb"; */
-+			function = LED_FUNCTION_USB;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+					  <&xhci_port1>, <&ohci_port2>,
-+					  <&ehci_port2>;
-+			linux,default-trigger = "usbport";
-+		};
-+
-+		power0 {
-+			/* label = "bcm53xx:red:power"; */
-+			function = LED_FUNCTION_FAULT;
-+			color = <LED_COLOR_ID_RED>;
-+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		power1 {
-+			/* label = "bcm53xx:white:power"; */
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_WHITE>;
-+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		router0 {
-+			/*  label = "bcm53xx:blue:router"; */
-+			function = LED_FUNCTION_STATUS;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		router1 {
-+			/* label = "bcm53xx:amber:router"; */
-+			function = LED_FUNCTION_STATUS;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		wan {
-+			/* label = "bcm53xx:blue:wan"; */
-+			function = LED_FUNCTION_WAN;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		wireless0 {
-+			/* label = "bcm53xx:blue:wireless"; */
-+			function = LED_FUNCTION_WLAN;
-+			color = <LED_COLOR_ID_BLUE>;
-+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		wireless1 {
-+			/* label = "bcm53xx:amber:wireless"; */
-+			function = LED_FUNCTION_WLAN;
-+			color = <LED_COLOR_ID_AMBER>;
-+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		aoss {
-+			label = "AOSS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		/* Commit mode set by switch? */
-+		mode {
-+			label = "Mode";
-+			linux,code = <KEY_SETUP>;
-+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		/* Switch: AP mode */
-+		sw_ap {
-+			label = "AP";
-+			linux,code = <BTN_0>;
-+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		eject {
-+			label = "USB eject";
-+			linux,code = <KEY_EJECTCD>;
-+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&usb2 {
-+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3 {
-+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+};
-+
-+&spi_nor {
-+	status = "okay";
-+};
-+
-+&usb3_phy {
-+	status = "okay";
-+};
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
-@@ -0,0 +1,26 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device Tree Bindigs for Buffalo WZR-1166DHP
-+ *
-+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
-+
-+/ {
-+	compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708";
-+	model = "Buffalo WZR-1166DHP";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x18000000>;
-+	};
-+
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
-@@ -0,0 +1,26 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device Tree Bindigs for Buffalo WZR-1166DHP2
-+ *
-+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
-+
-+/ {
-+	compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708";
-+	model = "Buffalo WZR-1166DHP2";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
-+	};
-+
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0009-Revert-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-nod.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0009-Revert-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-nod.patch
deleted file mode 100644
index cc7e9741a7a9..000000000000
--- a/target/linux/bcm53xx/patches-5.10/036-v5.19-0009-Revert-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-nod.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 18176b9d82eebaf4408dc0440f54d57a8cbced83 Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Fri, 13 May 2022 11:11:07 +0200
-Subject: [PATCH] Revert "ARM: dts: BCM5301X: Fix DTC warning for NAND node"
-
-This reverts commit 90103611d573, which caused a new DTC warning
-
-arch/arm/boot/dts/bcm953012hr.dts:57.3-33: Warning (reg_format): /nand-controller@18028000/nand@0/partition@0:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
-arch/arm/boot/dts/bcm953012hr.dts:62.3-33: Warning (reg_format): /nand-controller@18028000/nand@0/partition@200000:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
-arch/arm/boot/dts/bcm953012hr.dts:66.3-33: Warning (reg_format): /nand-controller@18028000/nand@0/partition@600000:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
-arch/arm/boot/dts/bcm953012hr.dts:70.3-33: Warning (reg_format): /nand-controller@18028000/nand@0/partition@1000000:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
-arch/arm/boot/dts/bcm953012hr.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
-arch/arm/boot/dts/bcm953012hr.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
-arch/arm/boot/dts/bcm953012hr.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
-arch/arm/boot/dts/bcm953012hr.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
- arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-@@ -10,6 +10,8 @@
- 		nandcs: nand@0 {
- 			compatible = "brcm,nandcs";
- 			reg = <0>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
- 
- 			partitions {
- 				compatible = "brcm,bcm947xx-cfe-partitions";
diff --git a/target/linux/bcm53xx/patches-5.10/037-v6.0-0001-ARM-dts-broadcom-align-gpio-key-node-names-with-dtsc.patch b/target/linux/bcm53xx/patches-5.10/037-v6.0-0001-ARM-dts-broadcom-align-gpio-key-node-names-with-dtsc.patch
deleted file mode 100644
index 33d675297e3b..000000000000
--- a/target/linux/bcm53xx/patches-5.10/037-v6.0-0001-ARM-dts-broadcom-align-gpio-key-node-names-with-dtsc.patch
+++ /dev/null
@@ -1,912 +0,0 @@
-From c5aec5611aec8fb1ca68f68e41acaefccfc93c16 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Thu, 9 Jun 2022 13:39:30 +0200
-Subject: [PATCH] ARM: dts: broadcom: align gpio-key node names with dtschema
-
-The node names should be generic and DT schema expects certain pattern
-(e.g. with key/button/switch).
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts          |  6 +++---
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts          |  8 ++++----
- .../boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 10 +++++-----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts    | 10 +++++-----
- arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts      |  4 ++--
- arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts      |  4 ++--
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts         |  2 +-
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts         |  2 +-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts          |  6 +++---
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts       |  6 +++---
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts        |  6 +++---
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts          |  4 ++--
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts   |  8 ++++----
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts    |  2 +-
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts        |  2 +-
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts        |  2 +-
- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts   |  4 ++--
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts          |  4 ++--
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts    | 12 ++++++------
- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts         |  4 ++--
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts          |  6 +++---
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts          |  8 ++++----
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts    |  4 ++--
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts         |  8 ++++----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts        |  6 +++---
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts      |  6 +++---
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts        |  2 +-
- arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts        |  2 +-
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts        |  2 +-
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts        |  2 +-
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts        |  2 +-
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts     |  2 +-
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts         |  8 ++++----
- arch/arm/boot/dts/bcm47094-phicomm-k3.dts            |  2 +-
- arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts        |  2 +-
- arch/arm/boot/dts/bcm47189-luxul-xap-810.dts         |  2 +-
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts             |  6 +++---
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts           |  2 +-
- arch/arm/boot/dts/bcm911360_entphn.dts               |  4 ++--
- arch/arm/boot/dts/bcm947189acdbmr.dts                |  4 ++--
- arch/arm/boot/dts/bcm953012er.dts                    |  4 ++--
- arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi        |  2 +-
- arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi      |  2 +-
- 43 files changed, 97 insertions(+), 97 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -70,19 +70,19 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		rfkill {
-+		button-rfkill {
- 			label = "WiFi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -54,25 +54,25 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		brightness {
-+		button-brightness {
- 			label = "Backlight";
- 			linux,code = <KEY_BRIGHTNESS_ZERO>;
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- 		};
- 
--		rfkill {
-+		button-rfkill {
- 			label = "WiFi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-@@ -104,33 +104,33 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- 		};
- 
--		aoss {
-+		button-aoss {
- 			label = "AOSS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- 		};
- 
- 		/* Commit mode set by switch? */
--		mode {
-+		button-mode {
- 			label = "Mode";
- 			linux,code = <KEY_SETUP>;
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 		};
- 
- 		/* Switch: AP mode */
--		sw_ap {
-+		button-sw-ap {
- 			label = "AP";
- 			linux,code = <BTN_0>;
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 		};
- 
--		eject {
-+		button-eject {
- 			label = "USB eject";
- 			linux,code = <KEY_EJECTCD>;
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -100,33 +100,33 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- 		};
- 
--		aoss {
-+		button-aoss {
- 			label = "AOSS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- 		};
- 
- 		/* Commit mode set by switch? */
--		mode {
-+		button-mode {
- 			label = "Mode";
- 			linux,code = <KEY_SETUP>;
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 		};
- 
- 		/* Switch: AP mode */
--		sw_ap {
-+		button-sw-ap {
- 			label = "AP";
- 			linux,code = <BTN_0>;
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 		};
- 
--		eject {
-+		button-eject {
- 			label = "USB eject";
- 			linux,code = <KEY_EJECTCD>;
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -29,13 +29,13 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-@@ -25,13 +25,13 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -45,7 +45,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -52,7 +52,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -63,19 +63,19 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- 		};
- 
--		rfkill {
-+		button-rfkill {
- 			label = "WiFi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -59,19 +59,19 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- 		};
- 
--		rfkill {
-+		button-rfkill {
- 			label = "WiFi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -94,19 +94,19 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		rfkill {
-+		button-rfkill {
- 			label = "WiFi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -60,13 +60,13 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -91,26 +91,26 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		aoss {
-+		button-aoss {
- 			label = "AOSS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- 		};
- 
- 		/* Switch device mode? */
--		mode {
-+		button-mode {
- 			label = "Mode";
- 			linux,code = <KEY_SETUP>;
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 		};
- 
--		eject {
-+		button-eject {
- 			label = "USB eject";
- 			linux,code = <KEY_EJECTCD>;
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -96,7 +96,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -45,7 +45,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -94,7 +94,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -77,13 +77,13 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		rfkill {
-+		button-rfkill {
- 			label = "WiFi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -50,13 +50,13 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -80,39 +80,39 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
--		power {
-+		button-power {
- 			label = "Power";
- 			linux,code = <KEY_POWER>;
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- 		};
- 
--		aoss {
-+		button-aoss {
- 			label = "AOSS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
- 		};
- 
- 		/* Commit mode set by switch? */
--		mode {
-+		button-mode {
- 			label = "Mode";
- 			linux,code = <KEY_SETUP>;
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- 		};
- 
- 		/* Switch: AP mode */
--		sw_ap {
-+		button-sw-ap {
- 			label = "AP";
- 			linux,code = <BTN_0>;
- 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- 		};
- 
--		eject {
-+		button-eject {
- 			label = "USB eject";
- 			linux,code = <KEY_EJECTCD>;
- 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -32,13 +32,13 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -75,19 +75,19 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- 		};
- 
--		rfkill {
-+		button-rfkill {
- 			label = "WiFi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -102,25 +102,25 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
--		rfkill {
-+		button-rfkill {
- 			label = "WiFi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- 		};
- 
--		brightness {
-+		button-brightness {
- 			label = "Backlight";
- 			linux,code = <KEY_BRIGHTNESS_ZERO>;
- 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -80,13 +80,13 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -72,25 +72,25 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
- 		};
- 
--		reset {
-+		button-reset {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wifi {
-+		button-wifi {
- 			label = "Wi-Fi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- 		};
- 
--		led {
-+		button-led {
- 			label = "Backlight";
- 			linux,code = <KEY_BRIGHTNESS_ZERO>;
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -86,20 +86,20 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
- 		};
- 
- 		/* Switch: router / extender */
--		extender {
-+		button-extender {
- 			label = "Extender";
- 			linux,code = <BTN_0>;
- 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -30,19 +30,19 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 		};
- 
--		rfkill {
-+		button-rfkill {
- 				label = "WiFi";
- 				linux,code = <KEY_RFKILL>;
- 				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
- 		};
- 
--		reset {
-+		button-reset {
- 				label = "Reset";
- 				linux,code = <KEY_RESTART>;
- 				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -49,7 +49,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -43,7 +43,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -49,7 +49,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -37,7 +37,7 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -89,7 +89,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -67,7 +67,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -65,25 +65,25 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		brightness {
-+		button-brightness {
- 			label = "Backlight";
- 			linux,code = <KEY_BRIGHTNESS_ZERO>;
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 		};
- 
--		rfkill {
-+		button-rfkill {
- 			label = "WiFi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -22,7 +22,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -39,7 +39,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -49,7 +49,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -59,19 +59,19 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		rfkill {
-+		button-rfkill {
- 			label = "WiFi";
- 			linux,code = <KEY_RFKILL>;
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -50,7 +50,7 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm911360_entphn.dts
-+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
-@@ -47,10 +47,10 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- 
--	gpio_keys {
-+	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		hook {
-+		button-hook {
- 			label = "HOOK";
- 			linux,code = <KEY_O>;
- 			gpios = <&gpio_asiu 48 0>;
---- a/arch/arm/boot/dts/bcm947189acdbmr.dts
-+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
-@@ -44,13 +44,13 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm953012er.dts
-+++ b/arch/arm/boot/dts/bcm953012er.dts
-@@ -47,13 +47,13 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 
--		wps {
-+		button-wps {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- 		};
- 
--		restart {
-+		button-restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
-+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
-@@ -13,7 +13,7 @@
- 		autorepeat;
- 		poll-interval = <20>;
- 
--		reset {
-+		button-reset {
- 			label = "reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
-+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
-@@ -14,7 +14,7 @@
- 		autorepeat;
- 		poll-interval = <20>;
- 
--		reset {
-+		button-reset {
- 			label = "reset";
- 			linux,code = <KEY_RESTART>;
- 			gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
diff --git a/target/linux/bcm53xx/patches-5.10/037-v6.0-0002-ARM-dts-broadcom-correct-gpio-keys-properties.patch b/target/linux/bcm53xx/patches-5.10/037-v6.0-0002-ARM-dts-broadcom-correct-gpio-keys-properties.patch
deleted file mode 100644
index 7bded431b059..000000000000
--- a/target/linux/bcm53xx/patches-5.10/037-v6.0-0002-ARM-dts-broadcom-correct-gpio-keys-properties.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From d634a6969c03803a945fdc2bccbe7d813420e569 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Thu, 9 Jun 2022 13:39:31 +0200
-Subject: [PATCH] ARM: dts: broadcom: correct gpio-keys properties
-
-gpio-keys children do not use unit addresses.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts       | 2 --
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 --
- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts      | 2 --
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts       | 2 --
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts       | 2 --
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 2 --
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts     | 2 --
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts        | 2 --
- 8 files changed, 16 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -47,8 +47,6 @@
- 
- 	gpio-keys {
- 		compatible = "gpio-keys";
--		#address-cells = <1>;
--		#size-cells = <0>;
- 
- 		button-wps {
- 			label = "WPS";
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -77,8 +77,6 @@
- 
- 	gpio-keys {
- 		compatible = "gpio-keys";
--		#address-cells = <1>;
--		#size-cells = <0>;
- 
- 		button-power {
- 			label = "Power";
---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -29,8 +29,6 @@
- 
- 	gpio-keys {
- 		compatible = "gpio-keys";
--		#address-cells = <1>;
--		#size-cells = <0>;
- 
- 		button-wps {
- 			label = "WPS";
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -72,8 +72,6 @@
- 
- 	gpio-keys {
- 		compatible = "gpio-keys";
--		#address-cells = <1>;
--		#size-cells = <0>;
- 
- 		button-wps {
- 			label = "WPS";
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -99,8 +99,6 @@
- 
- 	gpio-keys {
- 		compatible = "gpio-keys";
--		#address-cells = <1>;
--		#size-cells = <0>;
- 
- 		button-rfkill {
- 			label = "WiFi";
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -77,8 +77,6 @@
- 
- 	gpio-keys {
- 		compatible = "gpio-keys";
--		#address-cells = <1>;
--		#size-cells = <0>;
- 
- 		button-wps {
- 			label = "WPS";
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -34,8 +34,6 @@
- 
- 	gpio-keys {
- 		compatible = "gpio-keys";
--		#address-cells = <1>;
--		#size-cells = <0>;
- 
- 		button-restart {
- 			label = "Reset";
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -47,8 +47,6 @@
- 
- 	keys {
- 		compatible = "gpio-keys";
--		#address-cells = <1>;
--		#size-cells = <0>;
- 
- 		button-restart {
- 			label = "Reset";
diff --git a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch b/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch
deleted file mode 100644
index 4c4ed036b902..000000000000
--- a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From c8ee9f119bfb4244f76c9971c341ec06b49332cd Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 8 Nov 2022 12:07:08 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Correct description of TP-Link partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-TP-Link routers have flash space partitioned according to the partitions
-table. It may look like fixed partitioning but those partitions can be
-actually reorganized. New can be added (or some removed), offsets and
-sizes may change.
-
-Fix DT to use binding for the TP-Link SafeLoader partitioning method.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20221108110708.13693-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/bcm47081-tplink-archer-c5-v2.dts | 25 ++++---------------
- .../boot/dts/bcm4709-tplink-archer-c9-v1.dts  | 25 ++++---------------
- 2 files changed, 10 insertions(+), 40 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -95,30 +95,15 @@
- 	status = "okay";
- 
- 	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <1>;
--		#size-cells = <1>;
-+		compatible = "tplink,safeloader-partitions";
-+		partitions-table-offset = <0xe50000>;
- 
--		boot@0 {
--			label = "boot";
--			reg = <0x000000 0x040000>;
--			read-only;
--		};
--
--		os-image@100000 {
--			label = "os-image";
--			reg = <0x040000 0x200000>;
-+		partition-os-image {
- 			compatible = "brcm,trx";
- 		};
- 
--		rootfs@240000 {
--			label = "rootfs";
--			reg = <0x240000 0xc00000>;
--		};
--
--		nvram@ff0000 {
--			label = "nvram";
--			reg = <0xff0000 0x010000>;
-+		partition-file-system {
-+			linux,rootfs;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -104,30 +104,15 @@
- 	status = "okay";
- 
- 	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <1>;
--		#size-cells = <1>;
-+		compatible = "tplink,safeloader-partitions";
-+		partitions-table-offset = <0xe50000>;
- 
--		boot@0 {
--			label = "boot";
--			reg = <0x000000 0x040000>;
--			read-only;
--		};
--
--		os-image@100000 {
--			label = "os-image";
--			reg = <0x040000 0x200000>;
-+		partition-os-image {
- 			compatible = "brcm,trx";
- 		};
- 
--		rootfs@240000 {
--			label = "rootfs";
--			reg = <0x240000 0xc00000>;
--		};
--
--		nvram@ff0000 {
--			label = "nvram";
--			reg = <0xff0000 0x010000>;
-+		partition-file-system {
-+			linux,rootfs;
- 		};
- 	};
- };
diff --git a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch b/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch
deleted file mode 100644
index e921e55461a5..000000000000
--- a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-From b1ba87897ceda8e49a47aa92832dd7bff8583e21 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 7 Nov 2022 14:41:04 +0100
-Subject: [PATCH] ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L
-
-This adds a device tree for the D-Link DIR-890L. This device
-is very similar to D-Link DIR-885L, the differences are detailed
-as a comment in the DTS file.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Link: https://lore.kernel.org/r/20221107134104.1422169-2-linus.walleij@linaro.org
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile                    |   1 +
- arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 211 ++++++++++++++++++
- 2 files changed, 212 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -122,6 +122,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4709-tplink-archer-c9-v1.dtb \
- 	bcm47094-asus-rt-ac88u.dtb \
- 	bcm47094-dlink-dir-885l.dtb \
-+	bcm47094-dlink-dir-890l.dtb \
- 	bcm47094-linksys-panamera.dtb \
- 	bcm47094-luxul-abr-4500.dtb \
- 	bcm47094-luxul-xap-1610.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-@@ -0,0 +1,211 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device tree for D-Link DIR-890L
-+ * D-Link calls this board "WRGAC36"
-+ * this router has the same looks and form factor as D-Link DIR-885L.
-+ *
-+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
-+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
-+ * router/extender switch is mounted (there is an empty mount point on the
-+ * PCB) so this device is a pure router. Also the LAN ports are in the right
-+ * order.
-+ *
-+ * Based on the device tree for DIR-885L
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-+ * Copyright (C) 2022 Linus Walleij
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch1.dtsi"
-+
-+/ {
-+	compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
-+	model = "D-Link DIR-890L";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200 earlycon";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
-+	};
-+
-+	leds {
-+		/*
-+		 * LED information is derived from the boot log which
-+		 * conveniently lists all the LEDs.
-+		 */
-+		compatible = "gpio-leds";
-+
-+		power-white {
-+			label = "bcm53xx:white:power";
-+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		wan-white {
-+			label = "bcm53xx:white:wan";
-+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		power-amber {
-+			label = "bcm53xx:amber:power";
-+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		wan-amber {
-+			label = "bcm53xx:amber:wan";
-+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		usb3-white {
-+			label = "bcm53xx:white:usb3";
-+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&xhci_port1>;
-+			linux,default-trigger = "usbport";
-+		};
-+
-+		usb2-white {
-+			label = "bcm53xx:white:usb2";
-+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+			linux,default-trigger = "usbport";
-+		};
-+
-+		2ghz {
-+			label = "bcm53xx:white:2ghz";
-+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		5ghz {
-+			label = "bcm53xx:white:5ghz";
-+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+
-+		button-wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		/* Called "factory reset" in the vendor dmesg */
-+		button-restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	/*
-+	 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
-+	 * 64KB blocks; total size 2MB, same that can be
-+	 * found attached to the spi_nor SPI controller.
-+	 */
-+	nvram@1e1f0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1e1f0000 0x00010000>;
-+
-+		et0macaddr: et0macaddr {
-+		};
-+	};
-+};
-+
-+&gmac2 {
-+	/*
-+	 * The NVRAM curiously does not contain a MAC address
-+	 * for et2 so since that is the only ethernet interface
-+	 * actually in use on the platform, we use this et0 MAC
-+	 * address for et2.
-+	 */
-+	nvmem-cells = <&et0macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
-+&spi_nor {
-+	status = "okay";
-+};
-+
-+&nandcs {
-+	/* Spansion S34ML01G2, 128MB with 128KB erase blocks */
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		/*
-+		 * This is called "nflash" in the vendor kernel with
-+		 * "upgrade" and "rootfs" (probably using OpenWrt
-+		 * splitpart). We call it "firmware" like standard tools
-+		 * assume. The CFE loader contains incorrect information
-+		 * about TRX partitions, ignore this, there are no TRX
-+		 * partitions: this device uses SEAMA.
-+		 */
-+		firmware@0 {
-+			label = "firmware";
-+			reg = <0x00000000 0x08000000>;
-+		};
-+	};
-+};
-+
-+&usb2 {
-+	vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3 {
-+	vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3_phy {
-+	status = "okay";
-+};
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@8 {
-+			reg = <8>;
-+			label = "cpu";
-+			ethernet = <&gmac2>;
-+			phy-mode = "rgmii";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch b/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch
deleted file mode 100644
index c02c80065b11..000000000000
--- a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From 9f66e1dd82e3186aee95282657512ca2aef1afe0 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Wed, 19 Oct 2022 21:34:49 +0200
-Subject: [PATCH] ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP
-
-This adds a device tree for the BCM53016-based D-Link DWL-8610AP
-access point wireless router.
-
-The TRX-format partitions had to be named "firmware" due to
-an OpenWrt patch that only accepts parting such nodes if they
-are named "firmware".
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Link: https://lore.kernel.org/r/20221019193449.3036010-2-linus.walleij@linaro.org
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile                    |   1 +
- .../boot/dts/bcm53016-dlink-dwl-8610ap.dts    | 131 ++++++++++++++++++
- 2 files changed, 132 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm47094-netgear-r8500.dtb \
- 	bcm47094-phicomm-k3.dtb \
- 	bcm53015-meraki-mr26.dtb \
-+	bcm53016-dlink-dwl-8610ap.dtb \
- 	bcm53016-meraki-mr32.dtb \
- 	bcm94708.dtb \
- 	bcm94709.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
-@@ -0,0 +1,131 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+	model = "D-Link DWL-8610AP";
-+	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		/* 512 MB RAM in 2 x Macronix D9PSH chips */
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		power {
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+			default-state = "on";
-+		};
-+
-+		diag {
-+			/* Actually "diag" unclear what this means */
-+			function = LED_FUNCTION_INDICATOR;
-+			color = <LED_COLOR_ID_RED>;
-+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+			default-state = "on";
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		wlan-2g {
-+			function = LED_FUNCTION_WLAN;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		wlan-5g {
-+			function = LED_FUNCTION_WLAN;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+
-+		button-reset {
-+			debounce-interval = <100>;
-+			wakeup-source;
-+			linux,code = <KEY_RESTART>;
-+			label = "reset";
-+			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
-+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	/*
-+	 * Flash memory at 0x1e000000-0x1fffffff
-+	 * Macronix 32 64KB blocks; total size 2MB, same that can be
-+	 * found attached to the spi_nor SPI controller.
-+	 */
-+	nvram@1e080000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1e080000 0x00020000>;
-+
-+		et0macaddr: et0macaddr {
-+		};
-+
-+		et1macaddr: et1macaddr {
-+		};
-+	};
-+};
-+
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
-+&gmac1 {
-+	nvmem-cells = <&et1macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
-+&spi_nor {
-+	/* Serial SPI NOR Flash MX 25L1606E */
-+	status = "okay";
-+};
-+
-+&nandcs {
-+	/*
-+	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
-+	 *
-+	 * This ECC is a bit unorthodox but it is what the stock firmware
-+	 * is using, so to be able to mount the original partitions
-+	 * this is necessary.
-+	 */
-+	nand-ecc-strength = <5>;
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		/* This is named nflash1.trx in CFE */
-+		trx@0 {
-+			label = "firmware";
-+			reg = <0x00000000 0x02800000>;
-+			compatible = "brcm,trx";
-+		};
-+
-+		/* This is named nflash1.trx2 in CFE */
-+		trx2@2800000 {
-+			label = "firmware2";
-+			reg = <0x02800000 0x02800000>;
-+			compatible = "brcm,trx";
-+		};
-+
-+		/* This is named nflash1.rwfs in CFE */
-+		free@5000000 {
-+			label = "free";
-+			reg = <0x05000000 0x03000000>;
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.2-bcma-support-SPROM-rev-11.patch b/target/linux/bcm53xx/patches-5.10/039-v6.2-bcma-support-SPROM-rev-11.patch
deleted file mode 100644
index 5ebc78ca2023..000000000000
--- a/target/linux/bcm53xx/patches-5.10/039-v6.2-bcma-support-SPROM-rev-11.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From b9457a04eb89645049fdf427c13e6a18d5501895 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Tue, 11 Oct 2022 14:24:40 +0200
-Subject: [PATCH] bcma: support SPROM rev 11
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Rev 11 works fine for me to set the MAC address of gmac0 and
-gmac1 in the D-Link DWL-8610AP.
-
-Cc: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/bcma/sprom.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/bcma/sprom.c
-+++ b/drivers/bcma/sprom.c
-@@ -170,7 +170,7 @@ static int bcma_sprom_valid(struct bcma_
- 		return err;
- 
- 	revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
--	if (revision != 8 && revision != 9 && revision != 10) {
-+	if (revision < 8 || revision > 11) {
- 		pr_err("Unsupported SPROM revision: %d\n", revision);
- 		return -ENOENT;
- 	}
diff --git a/target/linux/bcm53xx/patches-5.10/070-v5.17-phy-bcm-ns-usb2-support-updated-DT-binding-with-PHY-.patch b/target/linux/bcm53xx/patches-5.10/070-v5.17-phy-bcm-ns-usb2-support-updated-DT-binding-with-PHY-.patch
deleted file mode 100644
index 464849bc6904..000000000000
--- a/target/linux/bcm53xx/patches-5.10/070-v5.17-phy-bcm-ns-usb2-support-updated-DT-binding-with-PHY-.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From d3bc6269e21fc474763708e79c7a118740befb94 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 26 Oct 2021 11:37:16 +0200
-Subject: [PATCH] phy: bcm-ns-usb2: support updated DT binding with PHY reg
- space
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Updated DT binding maps just a PHY's register space instead of the whole
-DMU block. Accessing a common CRU reg is handled using syscon &
-regmap.
-
-The old binding has been deprecated and remains supported as a fallback
-method.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20211026093716.5567-1-zajec5@gmail.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/phy/broadcom/phy-bcm-ns-usb2.c | 52 +++++++++++++++++++++-----
- 1 file changed, 43 insertions(+), 9 deletions(-)
-
---- a/drivers/phy/broadcom/phy-bcm-ns-usb2.c
-+++ b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
-@@ -9,17 +9,23 @@
- #include <linux/clk.h>
- #include <linux/delay.h>
- #include <linux/err.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/module.h>
- #include <linux/of_address.h>
- #include <linux/of_platform.h>
- #include <linux/phy/phy.h>
- #include <linux/platform_device.h>
-+#include <linux/regmap.h>
- #include <linux/slab.h>
- 
- struct bcm_ns_usb2 {
- 	struct device *dev;
- 	struct clk *ref_clk;
- 	struct phy *phy;
-+	struct regmap *clkset;
-+	void __iomem *base;
-+
-+	/* Deprecated binding */
- 	void __iomem *dmu;
- };
- 
-@@ -27,7 +33,6 @@ static int bcm_ns_usb2_phy_init(struct p
- {
- 	struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy);
- 	struct device *dev = usb2->dev;
--	void __iomem *dmu = usb2->dmu;
- 	u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv;
- 	int err = 0;
- 
-@@ -44,7 +49,10 @@ static int bcm_ns_usb2_phy_init(struct p
- 		goto err_clk_off;
- 	}
- 
--	usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL);
-+	if (usb2->base)
-+		usb2ctl = readl(usb2->base);
-+	else
-+		usb2ctl = readl(usb2->dmu + BCMA_DMU_CRU_USB2_CONTROL);
- 
- 	if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) {
- 		usb_pll_pdiv = usb2ctl;
-@@ -58,15 +66,24 @@ static int bcm_ns_usb2_phy_init(struct p
- 	usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate;
- 
- 	/* Unlock DMU PLL settings with some magic value */
--	writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY);
-+	if (usb2->clkset)
-+		regmap_write(usb2->clkset, 0, 0x0000ea68);
-+	else
-+		writel(0x0000ea68, usb2->dmu + BCMA_DMU_CRU_CLKSET_KEY);
- 
- 	/* Write USB 2.0 PLL control setting */
- 	usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK;
- 	usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT;
--	writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL);
-+	if (usb2->base)
-+		writel(usb2ctl, usb2->base);
-+	else
-+		writel(usb2ctl, usb2->dmu + BCMA_DMU_CRU_USB2_CONTROL);
- 
- 	/* Lock DMU PLL settings */
--	writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY);
-+	if (usb2->clkset)
-+		regmap_write(usb2->clkset, 0, 0x00000000);
-+	else
-+		writel(0x00000000, usb2->dmu + BCMA_DMU_CRU_CLKSET_KEY);
- 
- err_clk_off:
- 	clk_disable_unprepare(usb2->ref_clk);
-@@ -91,11 +108,28 @@ static int bcm_ns_usb2_probe(struct plat
- 		return -ENOMEM;
- 	usb2->dev = dev;
- 
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu");
--	usb2->dmu = devm_ioremap_resource(dev, res);
--	if (IS_ERR(usb2->dmu)) {
--		dev_err(dev, "Failed to map DMU regs\n");
--		return PTR_ERR(usb2->dmu);
-+	if (of_find_property(dev->of_node, "brcm,syscon-clkset", NULL)) {
-+		usb2->base = devm_platform_ioremap_resource(pdev, 0);
-+		if (IS_ERR(usb2->base)) {
-+			dev_err(dev, "Failed to map control reg\n");
-+			return PTR_ERR(usb2->base);
-+		}
-+
-+		usb2->clkset = syscon_regmap_lookup_by_phandle(dev->of_node,
-+							       "brcm,syscon-clkset");
-+		if (IS_ERR(usb2->clkset)) {
-+			dev_err(dev, "Failed to lookup clkset regmap\n");
-+			return PTR_ERR(usb2->clkset);
-+		}
-+	} else {
-+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu");
-+		usb2->dmu = devm_ioremap_resource(dev, res);
-+		if (IS_ERR(usb2->dmu)) {
-+			dev_err(dev, "Failed to map DMU regs\n");
-+			return PTR_ERR(usb2->dmu);
-+		}
-+
-+		dev_warn(dev, "using deprecated DT binding\n");
- 	}
- 
- 	usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk");
diff --git a/target/linux/bcm53xx/patches-5.10/080-v5.13-0001-dt-bindings-nvmem-add-Broadcom-s-NVRAM.patch b/target/linux/bcm53xx/patches-5.10/080-v5.13-0001-dt-bindings-nvmem-add-Broadcom-s-NVRAM.patch
deleted file mode 100644
index 01e29aaad6b3..000000000000
--- a/target/linux/bcm53xx/patches-5.10/080-v5.13-0001-dt-bindings-nvmem-add-Broadcom-s-NVRAM.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From c39edb9f9dcb6c8a0ba0ebf5df9e0ac93ab94b82 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Mar 2021 19:32:35 +0100
-Subject: [PATCH] dt-bindings: nvmem: add Broadcom's NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom's NVRAM structure contains device data and can be accessed
-using I/O mapping.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- .../devicetree/bindings/nvmem/brcm,nvram.yaml | 34 +++++++++++++++++++
- 1 file changed, 34 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
-@@ -0,0 +1,34 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/nvmem/brcm,nvram.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom's NVRAM
-+
-+description: |
-+  Broadcom's NVRAM is a structure containing device specific environment
-+  variables. It is used for storing device configuration, booting parameters
-+  and calibration data.
-+
-+  NVRAM can be accessed on Broadcom BCM47xx MIPS and Northstar ARM Cortex-A9
-+  devices usiong I/O mapped memory.
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+allOf:
-+  - $ref: "nvmem.yaml#"
-+
-+properties:
-+  compatible:
-+    const: brcm,nvram
-+
-+unevaluatedProperties: false
-+
-+examples:
-+  - |
-+    nvram@1eff0000 {
-+            compatible = "brcm,nvram";
-+            reg = <0x1eff0000 0x10000>;
-+    };
diff --git a/target/linux/bcm53xx/patches-5.10/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch b/target/linux/bcm53xx/patches-5.10/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch
deleted file mode 100644
index e1933e75c78a..000000000000
--- a/target/linux/bcm53xx/patches-5.10/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 13 Apr 2021 18:25:20 +0200
-Subject: [PATCH] mtd: parsers: trx: parse "firmware" MTD partitions only
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Parsing every partition with "compatible" set to "brcm,trx" results in
-parsing both: firmware partition and failsafe partition on devices that
-implement failsafe booting. This affects e.g. Linksys EA9500 which has:
-
-partition@200000 {
-	reg = <0x0200000 0x01d00000>;
-	compatible = "linksys,ns-firmware", "brcm,trx";
-};
-
-partition@1f00000 {
-	reg = <0x01f00000 0x01d00000>;
-	compatible = "linksys,ns-firmware", "brcm,trx";
-};
-
-Check for MTD partition name "firmware" before parsing. Recently added
-ofpart_linksys_ns.c creates "firmware" and "failsafe" depending on
-bootloader setup.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/mtd/parsers/parser_trx.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -92,6 +92,10 @@ static int parser_trx_parse(struct mtd_i
- 	if (err != 0 && err != -EINVAL)
- 		pr_err("failed to parse \"brcm,trx-magic\" DT attribute, using default: %d\n", err);
- 
-+	/* Don't parse any failsafe / backup partitions */
-+	if (strcmp(mtd->name, "firmware"))
-+		return -EINVAL;
-+
- 	parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition),
- 			GFP_KERNEL);
- 	if (!parts)
diff --git a/target/linux/bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
deleted file mode 100644
index 5254b3fbbeb0..000000000000
--- a/target/linux/bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 1 Oct 2016 22:54:48 +0200
-Subject: [PATCH] usb: xhci: add support for performing fake doorbell
-
-Broadcom's Northstar XHCI controllers seem to need a special start
-procedure to work correctly. There isn't any official documentation of
-this, the problem is that controller doesn't detect any connected
-devices with default setup. Moreover connecting USB device to controller
-that doesn't run properly can cause SoC's watchdog issues.
-
-A workaround that was successfully tested on multiple devices is to
-perform a fake doorbell. This patch adds code for doing this and enables
-it on BCM4708 family.
----
- drivers/usb/host/xhci-plat.c |  6 +++++
- drivers/usb/host/xhci.c      | 63 +++++++++++++++++++++++++++++++++++++++++---
- drivers/usb/host/xhci.h      |  1 +
- 3 files changed, 67 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -77,6 +77,8 @@ static int xhci_priv_resume_quirk(struct
- static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
- {
- 	struct xhci_plat_priv *priv = xhci_to_priv(xhci);
-+	struct platform_device*pdev = to_platform_device(dev);
-+	struct device_node *node = pdev->dev.of_node;
- 
- 	/*
- 	 * As of now platform drivers don't provide MSI support so we ensure
-@@ -84,6 +86,9 @@ static void xhci_plat_quirks(struct devi
- 	 * dev struct in order to setup MSI
- 	 */
- 	xhci->quirks |= XHCI_PLAT | priv->quirks;
-+
-+	if (node && of_machine_is_compatible("brcm,bcm4708"))
-+		xhci->quirks |= XHCI_FAKE_DOORBELL;
- }
- 
- /* called during probe() after chip reset completes */
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -159,6 +159,49 @@ int xhci_start(struct xhci_hcd *xhci)
- 	return ret;
- }
- 
-+/**
-+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot
-+ *
-+ * Some controllers require a fake doorbell to start correctly. Without that
-+ * they simply don't detect any devices.
-+ */
-+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
-+{
-+	u32 temp;
-+
-+	/* Alloc a virt device for that slot */
-+	if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
-+		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
-+		return -ENOMEM;
-+	}
-+
-+	/* Ring fake doorbell for slot_id ep 0 */
-+	xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
-+	usleep_range(1000, 1500);
-+
-+	/* Read the status to check if HSE is set or not */
-+	temp = readl(&xhci->op_regs->status);
-+
-+	/* Clear HSE if set */
-+	if (temp & STS_FATAL) {
-+		xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp);
-+		temp &= ~0x1fff;
-+		temp |= STS_FATAL;
-+		writel(temp, &xhci->op_regs->status);
-+		usleep_range(1000, 1500);
-+		readl(&xhci->op_regs->status);
-+	}
-+
-+	/* Free virt device */
-+	xhci_free_virt_device(xhci, slot_id);
-+
-+	/* We're done if controller is already running */
-+	if (readl(&xhci->op_regs->command) & CMD_RUN)
-+		return 0;
-+
-+	return xhci_start(xhci);
-+}
-+
- /*
-  * Reset a halted HC.
-  *
-@@ -612,10 +655,20 @@ static int xhci_init(struct usb_hcd *hcd
- 
- static int xhci_run_finished(struct xhci_hcd *xhci)
- {
--	if (xhci_start(xhci)) {
--		xhci_halt(xhci);
--		return -ENODEV;
-+	int err;
-+
-+	err = xhci_start(xhci);
-+	if (err) {
-+		err = -ENODEV;
-+		goto err_halt;
- 	}
-+
-+	if (xhci->quirks & XHCI_FAKE_DOORBELL) {
-+		err = xhci_fake_doorbell(xhci, 1);
-+		if (err)
-+			goto err_halt;
-+	}
-+
- 	xhci->shared_hcd->state = HC_STATE_RUNNING;
- 	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
- 
-@@ -625,6 +678,10 @@ static int xhci_run_finished(struct xhci
- 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- 			"Finished xhci_run for USB3 roothub");
- 	return 0;
-+
-+err_halt:
-+	xhci_halt(xhci);
-+	return err;
- }
- 
- /*
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1895,6 +1895,7 @@ struct xhci_hcd {
- #define XHCI_EP_CTX_BROKEN_DCS	BIT_ULL(42)
- #define XHCI_SUSPEND_RESUME_CLKS	BIT_ULL(43)
- #define XHCI_RESET_TO_DEFAULT	BIT_ULL(44)
-+#define XHCI_FAKE_DOORBELL	BIT_ULL(45)
- 
- 	unsigned int		num_active_eps;
- 	unsigned int		limit_active_eps;
diff --git a/target/linux/bcm53xx/patches-5.10/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-5.10/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
deleted file mode 100644
index 034d5b52fc79..000000000000
--- a/target/linux/bcm53xx/patches-5.10/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 24 Sep 2014 22:14:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom devices have broken CFE (bootloader) that leaves hardware in an
-invalid state. It causes problems with booting Linux. On Northstar
-devices kernel was randomly hanging in ~25% of tries during early init.
-Hangs used to happen at random places in the start_kernel. On BCM53573
-kernel doesn't even seem to start booting.
-
-To workaround this problem we need to do following very early:
-1) Clear 2 following bits in the SCTLR register:
-#define CR_M    (1 << 0)        /* MMU enable */
-#define CR_C    (1 << 2)        /* Dcache enable */
-2) Flush the whole D-cache
-3) Disable L2 cache
-
-Unfortunately this patch is not upstreamable as it does above things
-unconditionally. We can't check if we are running on Broadcom platform
-in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable
-as it could break other devices support.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -35,6 +35,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
- OBJS		+= ll_char_wr.o font.o
- endif
- 
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+OBJS		+= head-bcm_5301x-mpcore.o
-+OBJS		+= cache-v7-min.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_SA1100),y)
- OBJS		+= head-sa1100.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
-@@ -0,0 +1,37 @@
-+/*
-+ *
-+ * Platform specific tweaks.  This is merged into head.S by the linker.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/cp15.h>
-+
-+		.section        ".start", "ax"
-+
-+/*
-+ * This code section is spliced into the head code by the linker
-+ */
-+
-+__plat_uncompress_start:
-+
-+	@ Preserve r8/r7 i.e. kernel entry values
-+	mov	r12, r8
-+
-+	@ Clear MMU enable and Dcache enable bits
-+	mrc	p15, 0, r0, c1, c0, 0		@ Read SCTLR
-+	bic	r0, #CR_C|CR_M
-+	mcr	p15, 0, r0, c1, c0, 0		@ Write SCTLR
-+	nop
-+
-+	@ Call the cache invalidation routine
-+	bl	v7_flush_dcache_all
-+	nop
-+	mov	r0,#0
-+	ldr	r3, =0x19022000			@ L2 cache controller, control reg
-+	str	r0, [r3, #0x100]		@ Disable L2 cache
-+	nop
-+
-+	@ Restore
-+	mov	r8, r12
---- a/arch/arm/boot/compressed/cache-v7-min.S
-+++ b/arch/arm/boot/compressed/cache-v7-min.S
-@@ -12,6 +12,7 @@
- 
- #include <linux/linkage.h>
- #include <linux/init.h>
-+#include <asm/assembler.h>
- 
- 	__INIT
- 
-@@ -63,7 +64,7 @@ loop2:
-  ARM(	orr	r11, r11, r9, lsl r2	)	@ factor index number into r11
-  THUMB(	lsl	r6, r9, r2		)
-  THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
--	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
-+	mcr     p15, 0, r11, c7, c6, 2		@ clean & invalidate by set/way
- 	subs	r9, r9, #1			@ decrement the index
- 	bge	loop2
- 	subs	r4, r4, #1			@ decrement the way
diff --git a/target/linux/bcm53xx/patches-5.10/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch b/target/linux/bcm53xx/patches-5.10/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch
deleted file mode 100644
index 0fb29e99d34f..000000000000
--- a/target/linux/bcm53xx/patches-5.10/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch
+++ /dev/null
@@ -1,711 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Specify switch ports for remaining
- devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -93,3 +93,40 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -83,3 +83,40 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "lan4";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -149,3 +149,40 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -46,3 +46,40 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-@@ -42,3 +42,40 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -86,3 +86,40 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -77,3 +77,40 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "lan4";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -66,6 +66,38 @@
- 	status = "okay";
- };
- 
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan3";
-+		};
-+
-+		port@7 {
-+			reg = <7>;
-+			label = "cpu";
-+			ethernet = <&gmac1>;
-+		};
-+	};
-+};
-+
- &nandcs {
- 	partitions {
- 		compatible = "fixed-partitions";
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -130,3 +130,40 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -47,3 +47,45 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@8 {
-+			reg = <8>;
-+			label = "cpu";
-+			ethernet = <&gmac2>;
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -104,3 +104,40 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "lan4";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -94,3 +94,45 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "lan4";
-+		};
-+
-+		port@8 {
-+			reg = <8>;
-+			label = "cpu";
-+			ethernet = <&gmac2>;
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -38,6 +38,38 @@
- 	status = "okay";
- };
- 
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
-+
- &nandcs {
- 	partitions {
- 		compatible = "fixed-partitions";
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -91,6 +91,43 @@
- 	};
- };
- 
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "lan4";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
-+
- &spi_nor {
- 	status = "okay";
- 
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -100,6 +100,43 @@
- 	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- };
- 
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "lan4";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
-+
- &spi_nor {
- 	status = "okay";
- 
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -107,3 +107,41 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			reg = <5>;
-+			label = "cpu";
-+			ethernet = <&gmac0>;
-+		};
-+	};
-+};
-+
diff --git a/target/linux/bcm53xx/patches-5.10/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-5.10/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
deleted file mode 100644
index 923b4a0f37bd..000000000000
--- a/target/linux/bcm53xx/patches-5.10/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4709-buffalo-wxr-1900dhp.dtb \
- 	bcm4709-linksys-ea9200.dtb \
- 	bcm4709-netgear-r7000.dtb \
-+	bcm4709-netgear-r7900.dtb \
- 	bcm4709-netgear-r8000.dtb \
- 	bcm4709-tplink-archer-c9-v1.dtb \
- 	bcm47094-asus-rt-ac88u.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R7900
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+	compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
-+	model = "Netgear R7900";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x08000000>;
-+	};
-+
-+	axi@18000000 {
-+		usb3@23000 {
-+			reg = <0x00023000 0x1000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-5.10/315-ARM-dts-BCM5301X-Extend-RAM-to-full-256MB-for-Linksy.patch b/target/linux/bcm53xx/patches-5.10/315-ARM-dts-BCM5301X-Extend-RAM-to-full-256MB-for-Linksy.patch
deleted file mode 100644
index 068d67696281..000000000000
--- a/target/linux/bcm53xx/patches-5.10/315-ARM-dts-BCM5301X-Extend-RAM-to-full-256MB-for-Linksy.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From e492f69e4da879db7b3e9a2290e5b6620f1335b5 Mon Sep 17 00:00:00 2001
-From: Aleksey Nasibulin <alealexpro100@ya.ru>
-Date: Thu, 13 Oct 2022 08:16:51 +0000
-Subject: [PATCH] ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys
- EA6500 V2
-
-Linksys ea6500-v2 have 256MB of ram. Currently we only use 128MB.
-Expand the definition to use all the available RAM.
-
-Fixes: 03e96644d7a8 ("ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2")
-Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru>
----
- arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-@@ -19,7 +19,8 @@
- 
- 	memory@0 {
- 		device_type = "memory";
--		reg = <0x00000000 0x08000000>;
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
- 	};
- 
- 	gpio-keys {
diff --git a/target/linux/bcm53xx/patches-5.10/321-ARM-dts-BCM5301X-Describe-partition-formats.patch b/target/linux/bcm53xx/patches-5.10/321-ARM-dts-BCM5301X-Describe-partition-formats.patch
deleted file mode 100644
index f2861177dd1d..000000000000
--- a/target/linux/bcm53xx/patches-5.10/321-ARM-dts-BCM5301X-Describe-partition-formats.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 7166207bd1d8c46d09d640d46afc685df9bb9083 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 22 Nov 2018 09:21:49 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Describe partition formats
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's needed by OpenWrt for custom partitioning.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -35,6 +35,7 @@
- 				partition@0 {
- 					label = "firmware";
- 					reg = <0x00000000 0x08000000>;
-+					compatible = "seama";
- 				};
- 			};
- 		};
diff --git a/target/linux/bcm53xx/patches-5.10/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-5.10/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
deleted file mode 100644
index ff9d6b0005f6..000000000000
--- a/target/linux/bcm53xx/patches-5.10/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 16 Oct 2014 20:52:16 +0200
-Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/ubi/attach.c | 5 +++++
- drivers/mtd/ubi/io.c     | 4 ++++
- drivers/mtd/ubi/ubi.h    | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -82,6 +82,9 @@ static int self_check_ai(struct ubi_devi
- #define AV_ADD		BIT(1)
- #define AV_FIND_OR_ADD	(AV_FIND | AV_ADD)
- 
-+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
-+bool erase_all_next;
-+
- /**
-  * find_or_add_av - internal function to find a volume, add a volume or do
-  *		    both (find and add if missing).
-@@ -1580,6 +1583,8 @@ int ubi_attach(struct ubi_device *ubi, i
- 	if (!ai)
- 		return -ENOMEM;
- 
-+	erase_all_next = false;
-+
- #ifdef CONFIG_MTD_UBI_FASTMAP
- 	/* On small flash devices we disable fastmap in any case. */
- 	if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -710,6 +710,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
- 	}
- 
- 	magic = be32_to_cpu(ec_hdr->magic);
-+	if (magic == 0xdeadc0de)
-+		erase_all_next = true;
-+	if (erase_all_next)
-+		return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
- 	if (magic != UBI_EC_HDR_MAGIC) {
- 		if (mtd_is_eccerr(read_err))
- 			return UBI_IO_BAD_HDR_EBADMSG;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -822,6 +822,7 @@ extern struct mutex ubi_devices_mutex;
- extern struct blocking_notifier_head ubi_notifiers;
- 
- /* attach.c */
-+extern bool erase_all_next;
- struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum,
- 				   int ec);
- void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb);
diff --git a/target/linux/bcm53xx/patches-5.10/600-net-disable-GRO-by-default.patch b/target/linux/bcm53xx/patches-5.10/600-net-disable-GRO-by-default.patch
deleted file mode 100644
index d001852f3832..000000000000
--- a/target/linux/bcm53xx/patches-5.10/600-net-disable-GRO-by-default.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 20 Jun 2022 10:01:18 +0200
-Subject: [PATCH] net: disable GRO by default
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In many cases GRO improves network performance however it comes at a
-cost of chacksums calculations. In case of slow CPU and missing hardware
-csum calculation support GRO can actually decrease network speed.
-
-On BCM4708 *disabling* GRO results in following NAT masquarade speed
-changes:
-1. 364 Mb/s → 396 Mb/s (packet steering disabled)
-2. 341 Mb/s → 566 Mb/s (packet steering enabled)
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- include/linux/netdev_features.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdev_features.h
-+++ b/include/linux/netdev_features.h
-@@ -231,10 +231,10 @@ static inline int find_next_netdev_featu
- #define NETIF_F_UPPER_DISABLES	NETIF_F_LRO
- 
- /* changeable features with no special hardware requirements */
--#define NETIF_F_SOFT_FEATURES	(NETIF_F_GSO | NETIF_F_GRO)
-+#define NETIF_F_SOFT_FEATURES	(NETIF_F_GSO)
- 
- /* Changeable features with no special hardware requirements that defaults to off. */
--#define NETIF_F_SOFT_FEATURES_OFF	NETIF_F_GRO_FRAGLIST
-+#define NETIF_F_SOFT_FEATURES_OFF	(NETIF_F_GRO_FRAGLIST | NETIF_F_GRO)
- 
- #define NETIF_F_VLAN_FEATURES	(NETIF_F_HW_VLAN_CTAG_FILTER | \
- 				 NETIF_F_HW_VLAN_CTAG_RX | \
diff --git a/target/linux/bcm53xx/patches-5.10/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch b/target/linux/bcm53xx/patches-5.10/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch
deleted file mode 100644
index 2c2eb07b82da..000000000000
--- a/target/linux/bcm53xx/patches-5.10/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 10 Jun 2022 13:10:47 +0200
-Subject: [PATCH] bgmac: reduce max frame size to support just MTU 1500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-bgmac allocates new replacement buffer before handling each received
-frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU
-time. Ideally bgmac should just respect currently set MTU but it isn't
-the case right now. For now just revert back to the old limited frame
-size.
-
-This change bumps NAT masquarade speed by ~95%.
-
-Ref: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/net/ethernet/broadcom/bgmac.h | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -366,8 +366,7 @@
- #define BGMAC_RX_FRAME_OFFSET			30		/* There are 2 unused bytes between header and real data */
- #define BGMAC_RX_BUF_OFFSET			(NET_SKB_PAD + NET_IP_ALIGN - \
- 						 BGMAC_RX_FRAME_OFFSET)
--/* Jumbo frame size with FCS */
--#define BGMAC_RX_MAX_FRAME_SIZE			9724
-+#define BGMAC_RX_MAX_FRAME_SIZE			1536
- #define BGMAC_RX_BUF_SIZE			(BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
- #define BGMAC_RX_ALLOC_SIZE			(SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE + BGMAC_RX_BUF_OFFSET) + \
- 						 SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
diff --git a/target/linux/bcm53xx/patches-5.10/800-0001-firmware-bcm47xx_nvram-support-init-from-IO-memory.patch b/target/linux/bcm53xx/patches-5.10/800-0001-firmware-bcm47xx_nvram-support-init-from-IO-memory.patch
deleted file mode 100644
index 86792d6ebf72..000000000000
--- a/target/linux/bcm53xx/patches-5.10/800-0001-firmware-bcm47xx_nvram-support-init-from-IO-memory.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Mar 2021 08:24:44 +0100
-Subject: [PATCH] firmware: bcm47xx_nvram: support init from IO memory
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 17 +++++++++++++++++
- include/linux/bcm47xx_nvram.h             |  6 ++++++
- 2 files changed, 23 insertions(+)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -110,6 +110,23 @@ found:
- 	return 0;
- }
- 
-+int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start, size_t res_size)
-+{
-+	if (nvram_len) {
-+		pr_warn("nvram already initialized\n");
-+		return -EEXIST;
-+	}
-+
-+	if (!bcm47xx_nvram_is_valid(nvram_start)) {
-+		pr_err("No valid NVRAM found\n");
-+		return -ENOENT;
-+	}
-+
-+	bcm47xx_nvram_copy(nvram_start, res_size);
-+
-+	return 0;
-+}
-+
- /*
-  * On bcm47xx we need access to the NVRAM very early, so we can't use mtd
-  * subsystem to access flash. We can't even use platform device / driver to
---- a/include/linux/bcm47xx_nvram.h
-+++ b/include/linux/bcm47xx_nvram.h
-@@ -11,6 +11,7 @@
- #include <linux/vmalloc.h>
- 
- #ifdef CONFIG_BCM47XX_NVRAM
-+int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start, size_t res_size);
- int bcm47xx_nvram_init_from_mem(u32 base, u32 lim);
- int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len);
- int bcm47xx_nvram_gpio_pin(const char *name);
-@@ -20,6 +21,11 @@ static inline void bcm47xx_nvram_release
- 	vfree(nvram);
- };
- #else
-+static inline int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start,
-+						size_t res_size)
-+{
-+	return -ENOTSUPP;
-+}
- static inline int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
- {
- 	return -ENOTSUPP;
diff --git a/target/linux/bcm53xx/patches-5.10/800-0002-nvmem-brcm_nvram-provide-NVMEM-content-to-the-NVRAM-.patch b/target/linux/bcm53xx/patches-5.10/800-0002-nvmem-brcm_nvram-provide-NVMEM-content-to-the-NVRAM-.patch
deleted file mode 100644
index 6648874bcff0..000000000000
--- a/target/linux/bcm53xx/patches-5.10/800-0002-nvmem-brcm_nvram-provide-NVMEM-content-to-the-NVRAM-.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Mar 2021 08:26:14 +0100
-Subject: [PATCH] nvmem: brcm_nvram: provide NVMEM content to the NVRAM driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/nvmem/brcm_nvram.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/nvmem/brcm_nvram.c
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -3,6 +3,7 @@
-  * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-  */
- 
-+#include <linux/bcm47xx_nvram.h>
- #include <linux/io.h>
- #include <linux/mod_devicetable.h>
- #include <linux/module.h>
-@@ -139,6 +140,8 @@ static int brcm_nvram_probe(struct platf
- 	if (err)
- 		return err;
- 
-+	bcm47xx_nvram_init_from_iomem(priv->base, resource_size(res));
-+
- 	config.dev = dev;
- 	config.cells = priv->cells;
- 	config.ncells = priv->ncells;
diff --git a/target/linux/bcm53xx/patches-5.10/905-BCM53573-minor-hacks.patch b/target/linux/bcm53xx/patches-5.10/905-BCM53573-minor-hacks.patch
deleted file mode 100644
index 9aaa72595d0c..000000000000
--- a/target/linux/bcm53xx/patches-5.10/905-BCM53573-minor-hacks.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Aug 2016 10:30:41 +0200
-Subject: [PATCH] BCM53573 minor hacks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -54,6 +54,7 @@
- 			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- 			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-+		clocks = <&ilp>;
- 	};
- 
- 	clocks {
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -328,14 +328,6 @@ static int bcma_register_devices(struct
- 	}
- #endif
- 
--#ifdef CONFIG_BCMA_SFLASH
--	if (bus->drv_cc.sflash.present) {
--		err = platform_device_register(&bcma_sflash_dev);
--		if (err)
--			bcma_err(bus, "Error registering serial flash\n");
--	}
--#endif
--
- #ifdef CONFIG_BCMA_NFLASH
- 	if (bus->drv_cc.nflash.present) {
- 		err = platform_device_register(&bcma_nflash_dev);
-@@ -413,6 +405,14 @@ int bcma_bus_register(struct bcma_bus *b
- 			bcma_register_core(bus, core);
- 	}
- 
-+#ifdef CONFIG_BCMA_SFLASH
-+	if (bus->drv_cc.sflash.present) {
-+		err = platform_device_register(&bcma_sflash_dev);
-+		if (err)
-+			bcma_err(bus, "Error registering serial flash\n");
-+	}
-+#endif
-+
- 	/* Try to get SPROM */
- 	err = bcma_sprom_get(bus);
- 	if (err == -ENOENT) {
---- a/drivers/clocksource/arm_arch_timer.c
-+++ b/drivers/clocksource/arm_arch_timer.c
-@@ -14,6 +14,7 @@
- #include <linux/smp.h>
- #include <linux/cpu.h>
- #include <linux/cpu_pm.h>
-+#include <linux/clk.h>
- #include <linux/clockchips.h>
- #include <linux/clocksource.h>
- #include <linux/interrupt.h>
-@@ -934,6 +935,16 @@ static void arch_timer_of_configure_rate
- 	if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
- 		arch_timer_rate = rate;
- 
-+	/* Get clk rate through clk driver if present */
-+	if (!arch_timer_rate) {
-+		struct clk *clk = of_clk_get(np, 0);
-+
-+		if (!IS_ERR(clk)) {
-+			if (!clk_prepare_enable(clk))
-+				arch_timer_rate = clk_get_rate(clk);
-+		}
-+	}
-+
- 	/* Check the timer frequency. */
- 	if (validate_timer_rate())
- 		pr_warn("frequency not available\n");
diff --git a/target/linux/gemini/config-5.10 b/target/linux/gemini/config-5.10
deleted file mode 100644
index 19dc2692f207..000000000000
--- a/target/linux/gemini/config-5.10
+++ /dev/null
@@ -1,416 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_AMBA_PL08X=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_GEMINI=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-# CONFIG_ARCH_MOXART is not set
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_MULTI_V4_V5=y
-# CONFIG_ARCH_MULTI_V5 is not set
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_FORCE=y
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_PERCENTAGE=10
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-# CONFIG_CMA_SIZE_SEL_MBYTES is not set
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_GEMINI=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_FA=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FA=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_CPU_FA526=y
-CONFIG_CPU_NO_EFFICIENT_FFS=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_TLB_FA=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CCM=y
-CONFIG_CRYPTO_CMAC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZ4=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DMADEVICES=y
-CONFIG_DMATEST=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_GEM_CMA_HELPER=y
-CONFIG_DRM_KMS_CMA_HELPER=y
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ILITEK_IL9322=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_TVE200=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_ELF_CORE=y
-# CONFIG_EMBEDDED is not set
-# CONFIG_EXPERT is not set
-CONFIG_EXT4_FS=y
-CONFIG_FARADAY_FTINTC010=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FTTMR010_TIMER=y
-CONFIG_FTWDT010_WATCHDOG=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GEMINI_ETHERNET=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_FTGPIO010=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HDMI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IPC_NS=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KCMP=y
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEYBOARD_DLINK_DIR685=y
-# CONFIG_LDM_DEBUG is not set
-CONFIG_LDM_PARTITION=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_MQ_IOSCHED_DEADLINE=y
-CONFIG_MQ_IOSCHED_KYBER=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_GEMINI=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_NAMESPACES=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_REALTEK_SMI=y
-CONFIG_NET_DSA_TAG_RTL4_A=y
-CONFIG_NET_NS=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_PATA_FTIDE010=y
-CONFIG_PCI=y
-CONFIG_PCIEASPM=y
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_FTPCI100=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PID_NS=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_GEMINI=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GEMINI_POWEROFF=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPTION=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_RATIONAL=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZ4=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RSEQ=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_FTRTC010=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RTC_NVMEM=y
-CONFIG_SATA_GEMINI=y
-CONFIG_SATA_HOST=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SENSORS_DRIVETEMP=y
-CONFIG_SENSORS_GPIO_FAN=y
-CONFIG_SENSORS_LM75=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_EXAR=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USER_NS=y
-CONFIG_USE_OF=y
-CONFIG_UTS_NS=y
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VITESSE_PHY=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/gemini/patches-5.10/0001-usb-host-fotg2-add-Gemini-specific-handling.patch b/target/linux/gemini/patches-5.10/0001-usb-host-fotg2-add-Gemini-specific-handling.patch
deleted file mode 100644
index 937c9824f4d5..000000000000
--- a/target/linux/gemini/patches-5.10/0001-usb-host-fotg2-add-Gemini-specific-handling.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From ff887de2f7af17d6264eb946f6b336e6e1521222 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 21 Apr 2017 22:19:00 +0200
-Subject: [PATCH 1/2] usb: host: fotg2: add Gemini-specific handling
-
-The Cortina Systems Gemini has bolted on a PHY inside the
-silicon that can be handled by six bits in a MISC register in
-the system controller.
-
-If we are running on Gemini, look up a syscon regmap through
-a phandle and enable VBUS and optionally the Mini-B connector.
-
-If the device is flagged as "wakeup-source" using the standard
-DT bindings, we also enable this in the global controller for
-respective port.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/usb/host/Kconfig       |  1 +
- drivers/usb/host/fotg210-hcd.c | 76 ++++++++++++++++++++++++++++++++++
- 2 files changed, 77 insertions(+)
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -392,6 +392,7 @@ config USB_ISP1362_HCD
- config USB_FOTG210_HCD
- 	tristate "FOTG210 HCD support"
- 	depends on USB && HAS_DMA && HAS_IOMEM
-+	select MFD_SYSCON
- 	help
- 	  Faraday FOTG210 is an OTG controller which can be configured as
- 	  an USB2.0 host. It is designed to meet USB2.0 EHCI specification
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -34,6 +34,10 @@
- #include <linux/io.h>
- #include <linux/iopoll.h>
- #include <linux/clk.h>
-+#include <linux/bitops.h>
-+/* For Cortina Gemini */
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
- 
- #include <asm/byteorder.h>
- #include <asm/irq.h>
-@@ -5553,6 +5557,72 @@ static void fotg210_init(struct fotg210_
- }
- 
- /*
-+ * Gemini-specific initialization function, only executed on the
-+ * Gemini SoC using the global misc control register.
-+ */
-+#define GEMINI_GLOBAL_MISC_CTRL		0x30
-+#define GEMINI_MISC_USB0_WAKEUP		BIT(14)
-+#define GEMINI_MISC_USB1_WAKEUP		BIT(15)
-+#define GEMINI_MISC_USB0_VBUS_ON	BIT(22)
-+#define GEMINI_MISC_USB1_VBUS_ON	BIT(23)
-+#define GEMINI_MISC_USB0_MINI_B		BIT(29)
-+#define GEMINI_MISC_USB1_MINI_B		BIT(30)
-+
-+static int fotg210_gemini_init(struct device *dev, struct usb_hcd *hcd)
-+{
-+	struct device_node *np = dev->of_node;
-+	struct regmap *map;
-+	bool mini_b;
-+	bool wakeup;
-+	u32 mask, val;
-+	int ret;
-+
-+	map = syscon_regmap_lookup_by_phandle(np, "syscon");
-+	if (IS_ERR(map)) {
-+		dev_err(dev, "no syscon\n");
-+		return PTR_ERR(map);
-+	}
-+	mini_b = of_property_read_bool(np, "cortina,gemini-mini-b");
-+	wakeup = of_property_read_bool(np, "wakeup-source");
-+
-+	/*
-+	 * Figure out if this is USB0 or USB1 by simply checking the
-+	 * physical base address.
-+	 */
-+	mask = 0;
-+	if (hcd->rsrc_start == 0x69000000) {
-+		val = GEMINI_MISC_USB1_VBUS_ON;
-+		if (mini_b)
-+			val |= GEMINI_MISC_USB1_MINI_B;
-+		else
-+			mask |= GEMINI_MISC_USB1_MINI_B;
-+		if (wakeup)
-+			val |= GEMINI_MISC_USB1_WAKEUP;
-+		else
-+			mask |= GEMINI_MISC_USB1_WAKEUP;
-+	} else {
-+		val = GEMINI_MISC_USB0_VBUS_ON;
-+		if (mini_b)
-+			val |= GEMINI_MISC_USB0_MINI_B;
-+		else
-+			mask |= GEMINI_MISC_USB0_MINI_B;
-+		if (wakeup)
-+			val |= GEMINI_MISC_USB0_WAKEUP;
-+		else
-+			mask |= GEMINI_MISC_USB0_WAKEUP;
-+	}
-+
-+	ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val);
-+	if (ret) {
-+		dev_err(dev, "failed to initialize Gemini PHY\n");
-+		return ret;
-+	}
-+
-+	dev_info(dev, "initialized Gemini PHY\n");
-+	return 0;
-+}
-+
-+/**
-  * fotg210_hcd_probe - initialize faraday FOTG210 HCDs
-  *
-  * Allocates basic resources for this USB host controller, and
-@@ -5629,6 +5699,12 @@ static int fotg210_hcd_probe(struct plat
- 
- 	fotg210_init(fotg210);
- 
-+	if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) {
-+		retval = fotg210_gemini_init(dev, hcd);
-+		if (retval)
-+			goto failed_dis_clk;
-+	}
-+
- 	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- 	if (retval) {
- 		dev_err(dev, "failed to add hcd with err %d\n", retval);
diff --git a/target/linux/gemini/patches-5.10/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch b/target/linux/gemini/patches-5.10/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch
deleted file mode 100644
index 78a163afd87b..000000000000
--- a/target/linux/gemini/patches-5.10/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 36ee838bf83c01cff7cb47c7b07be278d2950ac0 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 11 Mar 2019 15:44:29 +0100
-Subject: [PATCH 2/2] ARM: dts: Augment DIR-685 partition table for OpenWrt
-
-Rename the firmware partition so that the firmware MTD
-splitter will do its job, drop the rootfs arguments as
-the MTD splitter will set this up automatically.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -20,7 +20,7 @@
- 	};
- 
- 	chosen {
--		bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
-+		bootargs = "console=ttyS0,19200n8 consoleblank=300";
- 		stdout-path = "uart0:19200n8";
- 	};
- 
-@@ -317,9 +317,9 @@
- 				 * this is called "upgrade" on the vendor system.
- 				 */
- 				partition@40000 {
--					label = "upgrade";
-+					compatible = "wrg";
-+					label = "firmware";
- 					reg = <0x00040000 0x01f40000>;
--					read-only;
- 				};
- 				/* RGDB, Residental Gateway Database? */
- 				partition@1f80000 {
diff --git a/target/linux/generic/backport-5.10/005-v5.17-01-Kbuild-use-Wdeclaration-after-statement.patch b/target/linux/generic/backport-5.10/005-v5.17-01-Kbuild-use-Wdeclaration-after-statement.patch
deleted file mode 100644
index 6eb1dd7ced15..000000000000
--- a/target/linux/generic/backport-5.10/005-v5.17-01-Kbuild-use-Wdeclaration-after-statement.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 2fd7e7f9317d3048a14026816d081b08ba98ea8e Mon Sep 17 00:00:00 2001
-From: Mark Rutland <mark.rutland@arm.com>
-Date: Tue, 8 Mar 2022 22:56:13 +0100
-Subject: [PATCH 1/3] Kbuild: use -Wdeclaration-after-statement
-
-The kernel is moving from using `-std=gnu89` to `-std=gnu11`, permitting
-the use of additional C11 features such as for-loop initial declarations.
-
-One contentious aspect of C99 is that it permits mixed declarations and
-code, and for now at least, it seems preferable to enforce that
-declarations must come first.
-
-These warnings were already enabled in the kernel itself, but not
-for KBUILD_USERCFLAGS or the compat VDSO on arch/arm64, which uses
-a separate set of CFLAGS.
-
-This patch fixes an existing violation in modpost.c, which is not
-reported because of the missing flag in KBUILD_USERCFLAGS:
-
-| scripts/mod/modpost.c: In function ‘match’:
-| scripts/mod/modpost.c:837:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
-|   837 |   const char *endp = p + strlen(p) - 1;
-|       |   ^~~~~
-
-Signed-off-by: Mark Rutland <mark.rutland@arm.com>
-[arnd: don't add a duplicate flag to the default set, update changelog]
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Reviewed-by: Nathan Chancellor <nathan@kernel.org>
-Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
-Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64)
-Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
----
- Makefile                          | 3 ++-
- arch/arm64/kernel/vdso32/Makefile | 1 +
- scripts/mod/modpost.c             | 4 +++-
- 3 files changed, 6 insertions(+), 2 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -423,7 +423,8 @@ HOSTCXX	= g++
- endif
- 
- export KBUILD_USERCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
--			      -O2 -fomit-frame-pointer -std=gnu89
-+			      -O2 -fomit-frame-pointer -std=gnu89 \
-+			      -Wdeclaration-after-statement
- export KBUILD_USERLDFLAGS :=
- 
- KBUILD_HOSTCFLAGS   := $(KBUILD_USERCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
---- a/arch/arm64/kernel/vdso32/Makefile
-+++ b/arch/arm64/kernel/vdso32/Makefile
-@@ -76,6 +76,7 @@ VDSO_CFLAGS += -Wall -Wundef -Wstrict-pr
-                -fno-strict-aliasing -fno-common \
-                -Werror-implicit-function-declaration \
-                -Wno-format-security \
-+               -Wdeclaration-after-statement \
-                -std=gnu89
- VDSO_CFLAGS  += -O2
- # Some useful compiler-dependent flags from top-level Makefile
---- a/scripts/mod/modpost.c
-+++ b/scripts/mod/modpost.c
-@@ -844,8 +844,10 @@ static int match(const char *sym, const
- {
- 	const char *p;
- 	while (*pat) {
-+		const char *endp;
-+
- 		p = *pat++;
--		const char *endp = p + strlen(p) - 1;
-+		endp = p + strlen(p) - 1;
- 
- 		/* "*foo*" */
- 		if (*p == '*' && *endp == '*') {
diff --git a/target/linux/generic/backport-5.10/005-v5.17-02-Kbuild-move-to-std-gnu11.patch b/target/linux/generic/backport-5.10/005-v5.17-02-Kbuild-move-to-std-gnu11.patch
deleted file mode 100644
index 89de9e8df95f..000000000000
--- a/target/linux/generic/backport-5.10/005-v5.17-02-Kbuild-move-to-std-gnu11.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From b810c8e719ea082e47c7a8f7cf878bc84fa2455d Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Tue, 8 Mar 2022 22:56:14 +0100
-Subject: [PATCH 2/3] Kbuild: move to -std=gnu11
-
-During a patch discussion, Linus brought up the option of changing
-the C standard version from gnu89 to gnu99, which allows using variable
-declaration inside of a for() loop. While the C99, C11 and later standards
-introduce many other features, most of these are already available in
-gnu89 as GNU extensions as well.
-
-An earlier attempt to do this when gcc-5 started defaulting to
--std=gnu11 failed because at the time that caused warnings about
-designated initializers with older compilers. Now that gcc-5.1 is
-the minimum compiler version used for building kernels, that is no
-longer a concern. Similarly, the behavior of 'inline' functions changes
-between gnu89 using gnu_inline behavior and gnu11 using standard c99+
-behavior, but this was taken care of by defining 'inline' to include
-__attribute__((gnu_inline)) in order to allow building with clang a
-while ago.
-
-Nathan Chancellor reported a new -Wdeclaration-after-statement
-warning that appears in a system header on arm, this still needs a
-workaround.
-
-The differences between gnu99, gnu11, gnu1x and gnu17 are fairly
-minimal and mainly impact warnings at the -Wpedantic level that the
-kernel never enables. Between these, gnu11 is the newest version
-that is supported by all supported compiler versions, though it is
-only the default on gcc-5, while all other supported versions of
-gcc or clang default to gnu1x/gnu17.
-
-Link: https://lore.kernel.org/lkml/CAHk-=wiyCH7xeHcmiFJ-YgXUy2Jaj7pnkdKpcovt8fYbVFW3TA@mail.gmail.com/
-Link: https://github.com/ClangBuiltLinux/linux/issues/1603
-Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
-Acked-by: Marco Elver <elver@google.com>
-Acked-by: Jani Nikula <jani.nikula@intel.com>
-Acked-by: David Sterba <dsterba@suse.com>
-Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
-Reviewed-by: Alex Shi <alexs@kernel.org>
-Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
-Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Reviewed-by: Nathan Chancellor <nathan@kernel.org>
-Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
----
- Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -507,7 +507,7 @@ KBUILD_CFLAGS   := -Wall -Wundef -Werror
- 		   -fno-strict-aliasing -fno-common -fshort-wchar -fno-PIE \
- 		   -Werror=implicit-function-declaration -Werror=implicit-int \
- 		   -Werror=return-type -Wno-format-security \
--		   -std=gnu89
-+		   -std=gnu11
- KBUILD_CPPFLAGS := -D__KERNEL__
- KBUILD_AFLAGS_KERNEL :=
- KBUILD_CFLAGS_KERNEL :=
diff --git a/target/linux/generic/backport-5.10/005-v5.17-03-Kbuild-use-std-gnu11-for-KBUILD_USERCFLAGS.patch b/target/linux/generic/backport-5.10/005-v5.17-03-Kbuild-use-std-gnu11-for-KBUILD_USERCFLAGS.patch
deleted file mode 100644
index 22c4d590b9c0..000000000000
--- a/target/linux/generic/backport-5.10/005-v5.17-03-Kbuild-use-std-gnu11-for-KBUILD_USERCFLAGS.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 40337d6f3d677aee7ad3052ae662d3f53dd4d5cb Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Tue, 8 Mar 2022 22:56:15 +0100
-Subject: [PATCH 3/3] Kbuild: use -std=gnu11 for KBUILD_USERCFLAGS
-
-As we change the C language standard for the kernel from gnu89 to
-gnu11, it makes sense to also update the version for user space
-compilation.
-
-Some users have older native compilers than what they use for
-kernel builds, so I considered using gnu99 as the default version
-for wider compatibility with gcc-4.6 and earlier.
-
-However, testing with older compilers showed that we already require
-HOSTCC version 5.1 as well because a lot of host tools include
-linux/compiler.h that uses __has_attribute():
-
-  CC      tools/objtool/exec-cmd.o
-In file included from tools/include/linux/compiler_types.h:36:0,
-                 from tools/include/linux/compiler.h:5,
-                 from exec-cmd.c:2:
-tools/include/linux/compiler-gcc.h:19:5: error: "__has_attribute" is not defined [-Werror=undef]
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Reviewed-by: Nathan Chancellor <nathan@kernel.org>
-Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
-Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
-Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
----
- Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -423,7 +423,7 @@ HOSTCXX	= g++
- endif
- 
- export KBUILD_USERCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
--			      -O2 -fomit-frame-pointer -std=gnu89 \
-+			      -O2 -fomit-frame-pointer -std=gnu11 \
- 			      -Wdeclaration-after-statement
- export KBUILD_USERLDFLAGS :=
- 
diff --git a/target/linux/generic/backport-5.10/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch b/target/linux/generic/backport-5.10/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch
deleted file mode 100644
index 7ac4f9d24002..000000000000
--- a/target/linux/generic/backport-5.10/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 13b1ecc3401653a355798eb1dee10cc1608202f4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 18 Jan 2016 12:27:49 +0100
-Subject: [PATCH 33/34] Kbuild: don't hardcode path to awk in
- scripts/ld-version.sh
-
-On some systems /usr/bin/awk does not exist, or is broken. Find it via
-$PATH instead.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- scripts/ld-version.sh | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/scripts/ld-version.sh
-+++ b/scripts/ld-version.sh
-@@ -1,6 +1,7 @@
--#!/usr/bin/awk -f
-+#!/bin/sh
- # SPDX-License-Identifier: GPL-2.0
- # extract linker version number from stdin and turn into single number
-+exec awk '
- 	{
- 	gsub(".*\\)", "");
- 	gsub(".*version ", "");
-@@ -9,3 +10,4 @@
- 	print a[1]*100000000 + a[2]*1000000 + a[3]*10000;
- 	exit
- 	}
-+'
diff --git a/target/linux/generic/backport-5.10/011-kbuild-export-SUBARCH.patch b/target/linux/generic/backport-5.10/011-kbuild-export-SUBARCH.patch
deleted file mode 100644
index aeb59c7e3574..000000000000
--- a/target/linux/generic/backport-5.10/011-kbuild-export-SUBARCH.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 173019b66dcc9d68ad9333aa744dad1e369b5aa8 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 9 Jul 2017 00:26:53 +0200
-Subject: [PATCH 34/34] kernel: add compile fix for linux 4.9 on x86
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -517,7 +517,7 @@ KBUILD_LDFLAGS_MODULE :=
- KBUILD_LDFLAGS :=
- CLANG_FLAGS :=
- 
--export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
-+export ARCH SRCARCH SUBARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
- export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
- export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
- export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
diff --git a/target/linux/generic/backport-5.10/026-power-reset-linkstation-poweroff-add-missing-put_dev.patch b/target/linux/generic/backport-5.10/026-power-reset-linkstation-poweroff-add-missing-put_dev.patch
deleted file mode 100644
index 66e75bf51425..000000000000
--- a/target/linux/generic/backport-5.10/026-power-reset-linkstation-poweroff-add-missing-put_dev.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 1027a42c25cbf8cfc4ade6503c5110aae04866af Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= <dgcbueu@gmail.com>
-Date: Fri, 16 Oct 2020 20:22:37 +0200
-Subject: [PATCH] power: reset: linkstation-poweroff: add missing put_device()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The of_mdio_find_bus() takes a reference to the underlying device
-structure, we should release that reference using a put_device() call.
-
-Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
-Signed-off-by: Sebastian Reichel <sre@kernel.org>
----
- drivers/power/reset/linkstation-poweroff.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/power/reset/linkstation-poweroff.c
-+++ b/drivers/power/reset/linkstation-poweroff.c
-@@ -113,6 +113,7 @@ static int __init linkstation_poweroff_i
- 		return -EPROBE_DEFER;
- 
- 	phydev = phy_find_first(bus);
-+	put_device(&bus->dev);
- 	if (!phydev)
- 		return -EPROBE_DEFER;
- 
diff --git a/target/linux/generic/backport-5.10/050-v5.16-00-MIPS-uasm-Enable-muhu-opcode-for-MIPS-R6.patch b/target/linux/generic/backport-5.10/050-v5.16-00-MIPS-uasm-Enable-muhu-opcode-for-MIPS-R6.patch
deleted file mode 100644
index 82feb7421d5f..000000000000
--- a/target/linux/generic/backport-5.10/050-v5.16-00-MIPS-uasm-Enable-muhu-opcode-for-MIPS-R6.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:02 +0200
-Subject: [PATCH] MIPS: uasm: Enable muhu opcode for MIPS R6
-
-Enable the 'muhu' instruction, complementing the existing 'mulu', needed
-to implement a MIPS32 BPF JIT.
-
-Also fix a typo in the existing definition of 'dmulu'.
-
-Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
-
-This patch is a dependency for my 32-bit MIPS eBPF JIT.
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
----
-
---- a/arch/mips/include/asm/uasm.h
-+++ b/arch/mips/include/asm/uasm.h
-@@ -145,6 +145,7 @@ Ip_u1(_mtlo);
- Ip_u3u1u2(_mul);
- Ip_u1u2(_multu);
- Ip_u3u1u2(_mulu);
-+Ip_u3u1u2(_muhu);
- Ip_u3u1u2(_nor);
- Ip_u3u1u2(_or);
- Ip_u2u1u3(_ori);
---- a/arch/mips/mm/uasm-mips.c
-+++ b/arch/mips/mm/uasm-mips.c
-@@ -90,7 +90,7 @@ static const struct insn insn_table[insn
- 				RS | RT | RD},
- 	[insn_dmtc0]	= {M(cop0_op, dmtc_op, 0, 0, 0, 0), RT | RD | SET},
- 	[insn_dmultu]	= {M(spec_op, 0, 0, 0, 0, dmultu_op), RS | RT},
--	[insn_dmulu]	= {M(spec_op, 0, 0, 0, dmult_dmul_op, dmultu_op),
-+	[insn_dmulu]	= {M(spec_op, 0, 0, 0, dmultu_dmulu_op, dmultu_op),
- 				RS | RT | RD},
- 	[insn_drotr]	= {M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE},
- 	[insn_drotr32]	= {M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE},
-@@ -150,6 +150,8 @@ static const struct insn insn_table[insn
- 	[insn_mtlo]	= {M(spec_op, 0, 0, 0, 0, mtlo_op), RS},
- 	[insn_mulu]	= {M(spec_op, 0, 0, 0, multu_mulu_op, multu_op),
- 				RS | RT | RD},
-+	[insn_muhu]	= {M(spec_op, 0, 0, 0, multu_muhu_op, multu_op),
-+				RS | RT | RD},
- #ifndef CONFIG_CPU_MIPSR6
- 	[insn_mul]	= {M(spec2_op, 0, 0, 0, 0, mul_op), RS | RT | RD},
- #else
---- a/arch/mips/mm/uasm.c
-+++ b/arch/mips/mm/uasm.c
-@@ -59,7 +59,7 @@ enum opcode {
- 	insn_lddir, insn_ldpte, insn_ldx, insn_lh, insn_lhu, insn_ll, insn_lld,
- 	insn_lui, insn_lw, insn_lwu, insn_lwx, insn_mfc0, insn_mfhc0, insn_mfhi,
- 	insn_mflo, insn_modu, insn_movn, insn_movz, insn_mtc0, insn_mthc0,
--	insn_mthi, insn_mtlo, insn_mul, insn_multu, insn_mulu, insn_nor,
-+	insn_mthi, insn_mtlo, insn_mul, insn_multu, insn_mulu, insn_muhu, insn_nor,
- 	insn_or, insn_ori, insn_pref, insn_rfe, insn_rotr, insn_sb, insn_sc,
- 	insn_scd, insn_seleqz, insn_selnez, insn_sd, insn_sh, insn_sll,
- 	insn_sllv, insn_slt, insn_slti, insn_sltiu, insn_sltu, insn_sra,
-@@ -344,6 +344,7 @@ I_u1(_mtlo)
- I_u3u1u2(_mul)
- I_u1u2(_multu)
- I_u3u1u2(_mulu)
-+I_u3u1u2(_muhu)
- I_u3u1u2(_nor)
- I_u3u1u2(_or)
- I_u2u1u3(_ori)
diff --git a/target/linux/generic/backport-5.10/050-v5.16-01-mips-uasm-Add-workaround-for-Loongson-2F-nop-CPU-err.patch b/target/linux/generic/backport-5.10/050-v5.16-01-mips-uasm-Add-workaround-for-Loongson-2F-nop-CPU-err.patch
deleted file mode 100644
index 3a4d573f80af..000000000000
--- a/target/linux/generic/backport-5.10/050-v5.16-01-mips-uasm-Add-workaround-for-Loongson-2F-nop-CPU-err.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:03 +0200
-Subject: [PATCH] mips: uasm: Add workaround for Loongson-2F nop CPU errata
-
-This patch implements a workaround for the Loongson-2F nop in generated,
-code, if the existing option CONFIG_CPU_NOP_WORKAROUND is set. Before,
-the binutils option -mfix-loongson2f-nop was enabled, but no workaround
-was done when emitting MIPS code. Now, the nop pseudo instruction is
-emitted as "or ax,ax,zero" instead of the default "sll zero,zero,0". This
-is consistent with the workaround implemented by binutils.
-
-Link: https://sourceware.org/legacy-ml/binutils/2009-11/msg00387.html
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
----
-
---- a/arch/mips/include/asm/uasm.h
-+++ b/arch/mips/include/asm/uasm.h
-@@ -249,7 +249,11 @@ static inline void uasm_l##lb(struct uas
- #define uasm_i_bnezl(buf, rs, off) uasm_i_bnel(buf, rs, 0, off)
- #define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
- #define uasm_i_move(buf, a, b) UASM_i_ADDU(buf, a, 0, b)
-+#ifdef CONFIG_CPU_NOP_WORKAROUNDS
-+#define uasm_i_nop(buf) uasm_i_or(buf, 1, 1, 0)
-+#else
- #define uasm_i_nop(buf) uasm_i_sll(buf, 0, 0, 0)
-+#endif
- #define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1)
- 
- static inline void uasm_i_drotr_safe(u32 **p, unsigned int a1,
diff --git a/target/linux/generic/backport-5.10/050-v5.16-02-mips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch b/target/linux/generic/backport-5.10/050-v5.16-02-mips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch
deleted file mode 100644
index 798065996124..000000000000
--- a/target/linux/generic/backport-5.10/050-v5.16-02-mips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch
+++ /dev/null
@@ -1,3078 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:04 +0200
-Subject: [PATCH] mips: bpf: Add eBPF JIT for 32-bit MIPS
-
-This is an implementation of an eBPF JIT for 32-bit MIPS I-V and MIPS32.
-The implementation supports all 32-bit and 64-bit ALU and JMP operations,
-including the recently-added atomics. 64-bit div/mod and 64-bit atomics
-are implemented using function calls to math64 and atomic64 functions,
-respectively. All 32-bit operations are implemented natively by the JIT,
-except if the CPU lacks ll/sc instructions.
-
-Register mapping
-================
-All 64-bit eBPF registers are mapped to native 32-bit MIPS register pairs,
-and does not use any stack scratch space for register swapping. This means
-that all eBPF register data is kept in CPU registers all the time, and
-this simplifies the register management a lot. It also reduces the JIT's
-pressure on temporary registers since we do not have to move data around.
-
-Native register pairs are ordered according to CPU endiannes, following
-the O32 calling convention for passing 64-bit arguments and return values.
-The eBPF return value, arguments and callee-saved registers are mapped to
-their native MIPS equivalents.
-
-Since the 32 highest bits in the eBPF FP (frame pointer) register are
-always zero, only one general-purpose register is actually needed for the
-mapping. The MIPS fp register is used for this purpose. The high bits are
-mapped to MIPS register r0. This saves us one CPU register, which is much
-needed for temporaries, while still allowing us to treat the R10 (FP)
-register just like any other eBPF register in the JIT.
-
-The MIPS gp (global pointer) and at (assembler temporary) registers are
-used as internal temporary registers for constant blinding. CPU registers
-t6-t9 are used internally by the JIT when constructing more complex 64-bit
-operations. This is precisely what is needed - two registers to store an
-operand value, and two more as scratch registers when performing the
-operation.
-
-The register mapping is shown below.
-
-    R0 - $v1, $v0   return value
-    R1 - $a1, $a0   argument 1, passed in registers
-    R2 - $a3, $a2   argument 2, passed in registers
-    R3 - $t1, $t0   argument 3, passed on stack
-    R4 - $t3, $t2   argument 4, passed on stack
-    R5 - $t4, $t3   argument 5, passed on stack
-    R6 - $s1, $s0   callee-saved
-    R7 - $s3, $s2   callee-saved
-    R8 - $s5, $s4   callee-saved
-    R9 - $s7, $s6   callee-saved
-    FP - $r0, $fp   32-bit frame pointer
-    AX - $gp, $at   constant-blinding
-         $t6 - $t9  unallocated, JIT temporaries
-
-Jump offsets
-============
-The JIT tries to map all conditional JMP operations to MIPS conditional
-PC-relative branches. The MIPS branch offset field is 18 bits, in bytes,
-which is equivalent to the eBPF 16-bit instruction offset. However, since
-the JIT may emit more than one CPU instruction per eBPF instruction, the
-field width may overflow. If that happens, the JIT converts the long
-conditional jump to a short PC-relative branch with the condition
-inverted, jumping over a long unconditional absolute jmp (j).
-
-This conversion will change the instruction offset mapping used for jumps,
-and may in turn result in more branch offset overflows. The JIT therefore
-dry-runs the translation until no more branches are converted and the
-offsets do not change anymore. There is an upper bound on this of course,
-and if the JIT hits that limit, the last two iterations are run with all
-branches being converted.
-
-Tail call count
-===============
-The current tail call count is stored in the 16-byte area of the caller's
-stack frame that is reserved for the callee in the o32 ABI. The value is
-initialized in the prologue, and propagated to the tail-callee by skipping
-the initialization instructions when emitting the tail call.
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
----
- create mode 100644 arch/mips/net/bpf_jit_comp.c
- create mode 100644 arch/mips/net/bpf_jit_comp.h
- create mode 100644 arch/mips/net/bpf_jit_comp32.c
-
---- a/arch/mips/net/Makefile
-+++ b/arch/mips/net/Makefile
-@@ -2,4 +2,9 @@
- # MIPS networking code
- 
- obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o
--obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o
-+
-+ifeq ($(CONFIG_32BIT),y)
-+        obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp.o bpf_jit_comp32.o
-+else
-+        obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o
-+endif
---- /dev/null
-+++ b/arch/mips/net/bpf_jit_comp.c
-@@ -0,0 +1,1020 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Just-In-Time compiler for eBPF bytecode on MIPS.
-+ * Implementation of JIT functions common to 32-bit and 64-bit CPUs.
-+ *
-+ * Copyright (c) 2021 Anyfi Networks AB.
-+ * Author: Johan Almbladh <johan.almbladh@gmail.com>
-+ *
-+ * Based on code and ideas from
-+ * Copyright (c) 2017 Cavium, Inc.
-+ * Copyright (c) 2017 Shubham Bansal <illusionist.neo@gmail.com>
-+ * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
-+ */
-+
-+/*
-+ * Code overview
-+ * =============
-+ *
-+ * - bpf_jit_comp.h
-+ *   Common definitions and utilities.
-+ *
-+ * - bpf_jit_comp.c
-+ *   Implementation of JIT top-level logic and exported JIT API functions.
-+ *   Implementation of internal operations shared by 32-bit and 64-bit code.
-+ *   JMP and ALU JIT control code, register control code, shared ALU and
-+ *   JMP/JMP32 JIT operations.
-+ *
-+ * - bpf_jit_comp32.c
-+ *   Implementation of functions to JIT prologue, epilogue and a single eBPF
-+ *   instruction for 32-bit MIPS CPUs. The functions use shared operations
-+ *   where possible, and implement the rest for 32-bit MIPS such as ALU64
-+ *   operations.
-+ *
-+ * - bpf_jit_comp64.c
-+ *   Ditto, for 64-bit MIPS CPUs.
-+ *
-+ * Zero and sign extension
-+ * ========================
-+ * 32-bit MIPS instructions on 64-bit MIPS registers use sign extension,
-+ * but the eBPF instruction set mandates zero extension. We let the verifier
-+ * insert explicit zero-extensions after 32-bit ALU operations, both for
-+ * 32-bit and 64-bit MIPS JITs. Conditional JMP32 operations on 64-bit MIPs
-+ * are JITed with sign extensions inserted when so expected.
-+ *
-+ * ALU operations
-+ * ==============
-+ * ALU operations on 32/64-bit MIPS and ALU64 operations on 64-bit MIPS are
-+ * JITed in the following steps. ALU64 operations on 32-bit MIPS are more
-+ * complicated and therefore only processed by special implementations in
-+ * step (3).
-+ *
-+ * 1) valid_alu_i:
-+ *    Determine if an immediate operation can be emitted as such, or if
-+ *    we must fall back to the register version.
-+ *
-+ * 2) rewrite_alu_i:
-+ *    Convert BPF operation and immediate value to a canonical form for
-+ *    JITing. In some degenerate cases this form may be a no-op.
-+ *
-+ * 3) emit_alu_{i,i64,r,64}:
-+ *    Emit instructions for an ALU or ALU64 immediate or register operation.
-+ *
-+ * JMP operations
-+ * ==============
-+ * JMP and JMP32 operations require an JIT instruction offset table for
-+ * translating the jump offset. This table is computed by dry-running the
-+ * JIT without actually emitting anything. However, the computed PC-relative
-+ * offset may overflow the 18-bit offset field width of the native MIPS
-+ * branch instruction. In such cases, the long jump is converted into the
-+ * following sequence.
-+ *
-+ *    <branch> !<cond> +2    Inverted PC-relative branch
-+ *    nop                    Delay slot
-+ *    j <offset>             Unconditional absolute long jump
-+ *    nop                    Delay slot
-+ *
-+ * Since this converted sequence alters the offset table, all offsets must
-+ * be re-calculated. This may in turn trigger new branch conversions, so
-+ * the process is repeated until no further changes are made. Normally it
-+ * completes in 1-2 iterations. If JIT_MAX_ITERATIONS should reached, we
-+ * fall back to converting every remaining jump operation. The branch
-+ * conversion is independent of how the JMP or JMP32 condition is JITed.
-+ *
-+ * JMP32 and JMP operations are JITed as follows.
-+ *
-+ * 1) setup_jmp_{i,r}:
-+ *    Convert jump conditional and offset into a form that can be JITed.
-+ *    This form may be a no-op, a canonical form, or an inverted PC-relative
-+ *    jump if branch conversion is necessary.
-+ *
-+ * 2) valid_jmp_i:
-+ *    Determine if an immediate operations can be emitted as such, or if
-+ *    we must fall back to the register version. Applies to JMP32 for 32-bit
-+ *    MIPS, and both JMP and JMP32 for 64-bit MIPS.
-+ *
-+ * 3) emit_jmp_{i,i64,r,r64}:
-+ *    Emit instructions for an JMP or JMP32 immediate or register operation.
-+ *
-+ * 4) finish_jmp_{i,r}:
-+ *    Emit any instructions needed to finish the jump. This includes a nop
-+ *    for the delay slot if a branch was emitted, and a long absolute jump
-+ *    if the branch was converted.
-+ */
-+
-+#include <linux/limits.h>
-+#include <linux/bitops.h>
-+#include <linux/errno.h>
-+#include <linux/filter.h>
-+#include <linux/bpf.h>
-+#include <linux/slab.h>
-+#include <asm/bitops.h>
-+#include <asm/cacheflush.h>
-+#include <asm/cpu-features.h>
-+#include <asm/isa-rev.h>
-+#include <asm/uasm.h>
-+
-+#include "bpf_jit_comp.h"
-+
-+/* Convenience macros for descriptor access */
-+#define CONVERTED(desc)	((desc) & JIT_DESC_CONVERT)
-+#define INDEX(desc)	((desc) & ~JIT_DESC_CONVERT)
-+
-+/*
-+ * Push registers on the stack, starting at a given depth from the stack
-+ * pointer and increasing. The next depth to be written is returned.
-+ */
-+int push_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth)
-+{
-+	int reg;
-+
-+	for (reg = 0; reg < BITS_PER_BYTE * sizeof(mask); reg++)
-+		if (mask & BIT(reg)) {
-+			if ((excl & BIT(reg)) == 0) {
-+				if (sizeof(long) == 4)
-+					emit(ctx, sw, reg, depth, MIPS_R_SP);
-+				else /* sizeof(long) == 8 */
-+					emit(ctx, sd, reg, depth, MIPS_R_SP);
-+			}
-+			depth += sizeof(long);
-+		}
-+
-+	ctx->stack_used = max((int)ctx->stack_used, depth);
-+	return depth;
-+}
-+
-+/*
-+ * Pop registers from the stack, starting at a given depth from the stack
-+ * pointer and increasing. The next depth to be read is returned.
-+ */
-+int pop_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth)
-+{
-+	int reg;
-+
-+	for (reg = 0; reg < BITS_PER_BYTE * sizeof(mask); reg++)
-+		if (mask & BIT(reg)) {
-+			if ((excl & BIT(reg)) == 0) {
-+				if (sizeof(long) == 4)
-+					emit(ctx, lw, reg, depth, MIPS_R_SP);
-+				else /* sizeof(long) == 8 */
-+					emit(ctx, ld, reg, depth, MIPS_R_SP);
-+			}
-+			depth += sizeof(long);
-+		}
-+
-+	return depth;
-+}
-+
-+/* Compute the 28-bit jump target address from a BPF program location */
-+int get_target(struct jit_context *ctx, u32 loc)
-+{
-+	u32 index = INDEX(ctx->descriptors[loc]);
-+	unsigned long pc = (unsigned long)&ctx->target[ctx->jit_index];
-+	unsigned long addr = (unsigned long)&ctx->target[index];
-+
-+	if (!ctx->target)
-+		return 0;
-+
-+	if ((addr ^ pc) & ~MIPS_JMP_MASK)
-+		return -1;
-+
-+	return addr & MIPS_JMP_MASK;
-+}
-+
-+/* Compute the PC-relative offset to relative BPF program offset */
-+int get_offset(const struct jit_context *ctx, int off)
-+{
-+	return (INDEX(ctx->descriptors[ctx->bpf_index + off]) -
-+		ctx->jit_index - 1) * sizeof(u32);
-+}
-+
-+/* dst = imm (register width) */
-+void emit_mov_i(struct jit_context *ctx, u8 dst, s32 imm)
-+{
-+	if (imm >= -0x8000 && imm <= 0x7fff) {
-+		emit(ctx, addiu, dst, MIPS_R_ZERO, imm);
-+	} else {
-+		emit(ctx, lui, dst, (s16)((u32)imm >> 16));
-+		emit(ctx, ori, dst, dst, (u16)(imm & 0xffff));
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* dst = src (register width) */
-+void emit_mov_r(struct jit_context *ctx, u8 dst, u8 src)
-+{
-+	emit(ctx, ori, dst, src, 0);
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Validate ALU immediate range */
-+bool valid_alu_i(u8 op, s32 imm)
-+{
-+	switch (BPF_OP(op)) {
-+	case BPF_NEG:
-+	case BPF_LSH:
-+	case BPF_RSH:
-+	case BPF_ARSH:
-+		/* All legal eBPF values are valid */
-+		return true;
-+	case BPF_ADD:
-+		/* imm must be 16 bits */
-+		return imm >= -0x8000 && imm <= 0x7fff;
-+	case BPF_SUB:
-+		/* -imm must be 16 bits */
-+		return imm >= -0x7fff && imm <= 0x8000;
-+	case BPF_AND:
-+	case BPF_OR:
-+	case BPF_XOR:
-+		/* imm must be 16 bits unsigned */
-+		return imm >= 0 && imm <= 0xffff;
-+	case BPF_MUL:
-+		/* imm must be zero or a positive power of two */
-+		return imm == 0 || (imm > 0 && is_power_of_2(imm));
-+	case BPF_DIV:
-+	case BPF_MOD:
-+		/* imm must be an 17-bit power of two */
-+		return (u32)imm <= 0x10000 && is_power_of_2((u32)imm);
-+	}
-+	return false;
-+}
-+
-+/* Rewrite ALU immediate operation */
-+bool rewrite_alu_i(u8 op, s32 imm, u8 *alu, s32 *val)
-+{
-+	bool act = true;
-+
-+	switch (BPF_OP(op)) {
-+	case BPF_LSH:
-+	case BPF_RSH:
-+	case BPF_ARSH:
-+	case BPF_ADD:
-+	case BPF_SUB:
-+	case BPF_OR:
-+	case BPF_XOR:
-+		/* imm == 0 is a no-op */
-+		act = imm != 0;
-+		break;
-+	case BPF_MUL:
-+		if (imm == 1) {
-+			/* dst * 1 is a no-op */
-+			act = false;
-+		} else if (imm == 0) {
-+			/* dst * 0 is dst & 0 */
-+			op = BPF_AND;
-+		} else {
-+			/* dst * (1 << n) is dst << n */
-+			op = BPF_LSH;
-+			imm = ilog2(abs(imm));
-+		}
-+		break;
-+	case BPF_DIV:
-+		if (imm == 1) {
-+			/* dst / 1 is a no-op */
-+			act = false;
-+		} else {
-+			/* dst / (1 << n) is dst >> n */
-+			op = BPF_RSH;
-+			imm = ilog2(imm);
-+		}
-+		break;
-+	case BPF_MOD:
-+		/* dst % (1 << n) is dst & ((1 << n) - 1) */
-+		op = BPF_AND;
-+		imm--;
-+		break;
-+	}
-+
-+	*alu = op;
-+	*val = imm;
-+	return act;
-+}
-+
-+/* ALU immediate operation (32-bit) */
-+void emit_alu_i(struct jit_context *ctx, u8 dst, s32 imm, u8 op)
-+{
-+	switch (BPF_OP(op)) {
-+	/* dst = -dst */
-+	case BPF_NEG:
-+		emit(ctx, subu, dst, MIPS_R_ZERO, dst);
-+		break;
-+	/* dst = dst & imm */
-+	case BPF_AND:
-+		emit(ctx, andi, dst, dst, (u16)imm);
-+		break;
-+	/* dst = dst | imm */
-+	case BPF_OR:
-+		emit(ctx, ori, dst, dst, (u16)imm);
-+		break;
-+	/* dst = dst ^ imm */
-+	case BPF_XOR:
-+		emit(ctx, xori, dst, dst, (u16)imm);
-+		break;
-+	/* dst = dst << imm */
-+	case BPF_LSH:
-+		emit(ctx, sll, dst, dst, imm);
-+		break;
-+	/* dst = dst >> imm */
-+	case BPF_RSH:
-+		emit(ctx, srl, dst, dst, imm);
-+		break;
-+	/* dst = dst >> imm (arithmetic) */
-+	case BPF_ARSH:
-+		emit(ctx, sra, dst, dst, imm);
-+		break;
-+	/* dst = dst + imm */
-+	case BPF_ADD:
-+		emit(ctx, addiu, dst, dst, imm);
-+		break;
-+	/* dst = dst - imm */
-+	case BPF_SUB:
-+		emit(ctx, addiu, dst, dst, -imm);
-+		break;
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* ALU register operation (32-bit) */
-+void emit_alu_r(struct jit_context *ctx, u8 dst, u8 src, u8 op)
-+{
-+	switch (BPF_OP(op)) {
-+	/* dst = dst & src */
-+	case BPF_AND:
-+		emit(ctx, and, dst, dst, src);
-+		break;
-+	/* dst = dst | src */
-+	case BPF_OR:
-+		emit(ctx, or, dst, dst, src);
-+		break;
-+	/* dst = dst ^ src */
-+	case BPF_XOR:
-+		emit(ctx, xor, dst, dst, src);
-+		break;
-+	/* dst = dst << src */
-+	case BPF_LSH:
-+		emit(ctx, sllv, dst, dst, src);
-+		break;
-+	/* dst = dst >> src */
-+	case BPF_RSH:
-+		emit(ctx, srlv, dst, dst, src);
-+		break;
-+	/* dst = dst >> src (arithmetic) */
-+	case BPF_ARSH:
-+		emit(ctx, srav, dst, dst, src);
-+		break;
-+	/* dst = dst + src */
-+	case BPF_ADD:
-+		emit(ctx, addu, dst, dst, src);
-+		break;
-+	/* dst = dst - src */
-+	case BPF_SUB:
-+		emit(ctx, subu, dst, dst, src);
-+		break;
-+	/* dst = dst * src */
-+	case BPF_MUL:
-+		if (cpu_has_mips32r1 || cpu_has_mips32r6) {
-+			emit(ctx, mul, dst, dst, src);
-+		} else {
-+			emit(ctx, multu, dst, src);
-+			emit(ctx, mflo, dst);
-+		}
-+		break;
-+	/* dst = dst / src */
-+	case BPF_DIV:
-+		if (cpu_has_mips32r6) {
-+			emit(ctx, divu_r6, dst, dst, src);
-+		} else {
-+			emit(ctx, divu, dst, src);
-+			emit(ctx, mflo, dst);
-+		}
-+		break;
-+	/* dst = dst % src */
-+	case BPF_MOD:
-+		if (cpu_has_mips32r6) {
-+			emit(ctx, modu, dst, dst, src);
-+		} else {
-+			emit(ctx, divu, dst, src);
-+			emit(ctx, mfhi, dst);
-+		}
-+		break;
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Atomic read-modify-write (32-bit) */
-+void emit_atomic_r(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 code)
-+{
-+	emit(ctx, ll, MIPS_R_T9, off, dst);
-+	switch (code) {
-+	case BPF_ADD:
-+		emit(ctx, addu, MIPS_R_T8, MIPS_R_T9, src);
-+		break;
-+	case BPF_AND:
-+		emit(ctx, and, MIPS_R_T8, MIPS_R_T9, src);
-+		break;
-+	case BPF_OR:
-+		emit(ctx, or, MIPS_R_T8, MIPS_R_T9, src);
-+		break;
-+	case BPF_XOR:
-+		emit(ctx, xor, MIPS_R_T8, MIPS_R_T9, src);
-+		break;
-+	}
-+	emit(ctx, sc, MIPS_R_T8, off, dst);
-+	emit(ctx, beqz, MIPS_R_T8, -16);
-+	emit(ctx, nop); /* Delay slot */
-+}
-+
-+/* Atomic compare-and-exchange (32-bit) */
-+void emit_cmpxchg_r(struct jit_context *ctx, u8 dst, u8 src, u8 res, s16 off)
-+{
-+	emit(ctx, ll, MIPS_R_T9, off, dst);
-+	emit(ctx, bne, MIPS_R_T9, res, 12);
-+	emit(ctx, move, MIPS_R_T8, src);     /* Delay slot */
-+	emit(ctx, sc, MIPS_R_T8, off, dst);
-+	emit(ctx, beqz, MIPS_R_T8, -20);
-+	emit(ctx, move, res, MIPS_R_T9);     /* Delay slot */
-+	clobber_reg(ctx, res);
-+}
-+
-+/* Swap bytes and truncate a register word or half word */
-+void emit_bswap_r(struct jit_context *ctx, u8 dst, u32 width)
-+{
-+	u8 tmp = MIPS_R_T8;
-+	u8 msk = MIPS_R_T9;
-+
-+	switch (width) {
-+	/* Swap bytes in a word */
-+	case 32:
-+		if (cpu_has_mips32r2 || cpu_has_mips32r6) {
-+			emit(ctx, wsbh, dst, dst);
-+			emit(ctx, rotr, dst, dst, 16);
-+		} else {
-+			emit(ctx, sll, tmp, dst, 16);    /* tmp  = dst << 16 */
-+			emit(ctx, srl, dst, dst, 16);    /* dst = dst >> 16  */
-+			emit(ctx, or, dst, dst, tmp);    /* dst = dst | tmp  */
-+
-+			emit(ctx, lui, msk, 0xff);       /* msk = 0x00ff0000 */
-+			emit(ctx, ori, msk, msk, 0xff);  /* msk = msk | 0xff */
-+
-+			emit(ctx, and, tmp, dst, msk);   /* tmp = dst & msk  */
-+			emit(ctx, sll, tmp, tmp, 8);     /* tmp = tmp << 8   */
-+			emit(ctx, srl, dst, dst, 8);     /* dst = dst >> 8   */
-+			emit(ctx, and, dst, dst, msk);   /* dst = dst & msk  */
-+			emit(ctx, or, dst, dst, tmp);    /* reg = dst | tmp  */
-+		}
-+		break;
-+	/* Swap bytes in a half word */
-+	case 16:
-+		if (cpu_has_mips32r2 || cpu_has_mips32r6) {
-+			emit(ctx, wsbh, dst, dst);
-+			emit(ctx, andi, dst, dst, 0xffff);
-+		} else {
-+			emit(ctx, andi, tmp, dst, 0xff00); /* t = d & 0xff00 */
-+			emit(ctx, srl, tmp, tmp, 8);       /* t = t >> 8     */
-+			emit(ctx, andi, dst, dst, 0x00ff); /* d = d & 0x00ff */
-+			emit(ctx, sll, dst, dst, 8);       /* d = d << 8     */
-+			emit(ctx, or,  dst, dst, tmp);     /* d = d | t      */
-+		}
-+		break;
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Validate jump immediate range */
-+bool valid_jmp_i(u8 op, s32 imm)
-+{
-+	switch (op) {
-+	case JIT_JNOP:
-+		/* Immediate value not used */
-+		return true;
-+	case BPF_JEQ:
-+	case BPF_JNE:
-+		/* No immediate operation */
-+		return false;
-+	case BPF_JSET:
-+	case JIT_JNSET:
-+		/* imm must be 16 bits unsigned */
-+		return imm >= 0 && imm <= 0xffff;
-+	case BPF_JGE:
-+	case BPF_JLT:
-+	case BPF_JSGE:
-+	case BPF_JSLT:
-+		/* imm must be 16 bits */
-+		return imm >= -0x8000 && imm <= 0x7fff;
-+	case BPF_JGT:
-+	case BPF_JLE:
-+	case BPF_JSGT:
-+	case BPF_JSLE:
-+		/* imm + 1 must be 16 bits */
-+		return imm >= -0x8001 && imm <= 0x7ffe;
-+	}
-+	return false;
-+}
-+
-+/* Invert a conditional jump operation */
-+static u8 invert_jmp(u8 op)
-+{
-+	switch (op) {
-+	case BPF_JA: return JIT_JNOP;
-+	case BPF_JEQ: return BPF_JNE;
-+	case BPF_JNE: return BPF_JEQ;
-+	case BPF_JSET: return JIT_JNSET;
-+	case BPF_JGT: return BPF_JLE;
-+	case BPF_JGE: return BPF_JLT;
-+	case BPF_JLT: return BPF_JGE;
-+	case BPF_JLE: return BPF_JGT;
-+	case BPF_JSGT: return BPF_JSLE;
-+	case BPF_JSGE: return BPF_JSLT;
-+	case BPF_JSLT: return BPF_JSGE;
-+	case BPF_JSLE: return BPF_JSGT;
-+	}
-+	return 0;
-+}
-+
-+/* Prepare a PC-relative jump operation */
-+static void setup_jmp(struct jit_context *ctx, u8 bpf_op,
-+		      s16 bpf_off, u8 *jit_op, s32 *jit_off)
-+{
-+	u32 *descp = &ctx->descriptors[ctx->bpf_index];
-+	int op = bpf_op;
-+	int offset = 0;
-+
-+	/* Do not compute offsets on the first pass */
-+	if (INDEX(*descp) == 0)
-+		goto done;
-+
-+	/* Skip jumps never taken */
-+	if (bpf_op == JIT_JNOP)
-+		goto done;
-+
-+	/* Convert jumps always taken */
-+	if (bpf_op == BPF_JA)
-+		*descp |= JIT_DESC_CONVERT;
-+
-+	/*
-+	 * Current ctx->jit_index points to the start of the branch preamble.
-+	 * Since the preamble differs among different branch conditionals,
-+	 * the current index cannot be used to compute the branch offset.
-+	 * Instead, we use the offset table value for the next instruction,
-+	 * which gives the index immediately after the branch delay slot.
-+	 */
-+	if (!CONVERTED(*descp)) {
-+		int target = ctx->bpf_index + bpf_off + 1;
-+		int origin = ctx->bpf_index + 1;
-+
-+		offset = (INDEX(ctx->descriptors[target]) -
-+			  INDEX(ctx->descriptors[origin]) + 1) * sizeof(u32);
-+	}
-+
-+	/*
-+	 * The PC-relative branch offset field on MIPS is 18 bits signed,
-+	 * so if the computed offset is larger than this we generate a an
-+	 * absolute jump that we skip with an inverted conditional branch.
-+	 */
-+	if (CONVERTED(*descp) || offset < -0x20000 || offset > 0x1ffff) {
-+		offset = 3 * sizeof(u32);
-+		op = invert_jmp(bpf_op);
-+		ctx->changes += !CONVERTED(*descp);
-+		*descp |= JIT_DESC_CONVERT;
-+	}
-+
-+done:
-+	*jit_off = offset;
-+	*jit_op = op;
-+}
-+
-+/* Prepare a PC-relative jump operation with immediate conditional */
-+void setup_jmp_i(struct jit_context *ctx, s32 imm, u8 width,
-+		 u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off)
-+{
-+	bool always = false;
-+	bool never = false;
-+
-+	switch (bpf_op) {
-+	case BPF_JEQ:
-+	case BPF_JNE:
-+		break;
-+	case BPF_JSET:
-+	case BPF_JLT:
-+		never = imm == 0;
-+		break;
-+	case BPF_JGE:
-+		always = imm == 0;
-+		break;
-+	case BPF_JGT:
-+		never = (u32)imm == U32_MAX;
-+		break;
-+	case BPF_JLE:
-+		always = (u32)imm == U32_MAX;
-+		break;
-+	case BPF_JSGT:
-+		never = imm == S32_MAX && width == 32;
-+		break;
-+	case BPF_JSGE:
-+		always = imm == S32_MIN && width == 32;
-+		break;
-+	case BPF_JSLT:
-+		never = imm == S32_MIN && width == 32;
-+		break;
-+	case BPF_JSLE:
-+		always = imm == S32_MAX && width == 32;
-+		break;
-+	}
-+
-+	if (never)
-+		bpf_op = JIT_JNOP;
-+	if (always)
-+		bpf_op = BPF_JA;
-+	setup_jmp(ctx, bpf_op, bpf_off, jit_op, jit_off);
-+}
-+
-+/* Prepare a PC-relative jump operation with register conditional */
-+void setup_jmp_r(struct jit_context *ctx, bool same_reg,
-+		 u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off)
-+{
-+	switch (bpf_op) {
-+	case BPF_JSET:
-+		break;
-+	case BPF_JEQ:
-+	case BPF_JGE:
-+	case BPF_JLE:
-+	case BPF_JSGE:
-+	case BPF_JSLE:
-+		if (same_reg)
-+			bpf_op = BPF_JA;
-+		break;
-+	case BPF_JNE:
-+	case BPF_JLT:
-+	case BPF_JGT:
-+	case BPF_JSGT:
-+	case BPF_JSLT:
-+		if (same_reg)
-+			bpf_op = JIT_JNOP;
-+		break;
-+	}
-+	setup_jmp(ctx, bpf_op, bpf_off, jit_op, jit_off);
-+}
-+
-+/* Finish a PC-relative jump operation */
-+int finish_jmp(struct jit_context *ctx, u8 jit_op, s16 bpf_off)
-+{
-+	/* Emit conditional branch delay slot */
-+	if (jit_op != JIT_JNOP)
-+		emit(ctx, nop);
-+	/*
-+	 * Emit an absolute long jump with delay slot,
-+	 * if the PC-relative branch was converted.
-+	 */
-+	if (CONVERTED(ctx->descriptors[ctx->bpf_index])) {
-+		int target = get_target(ctx, ctx->bpf_index + bpf_off + 1);
-+
-+		if (target < 0)
-+			return -1;
-+		emit(ctx, j, target);
-+		emit(ctx, nop);
-+	}
-+	return 0;
-+}
-+
-+/* Jump immediate (32-bit) */
-+void emit_jmp_i(struct jit_context *ctx, u8 dst, s32 imm, s32 off, u8 op)
-+{
-+	switch (op) {
-+	/* No-op, used internally for branch optimization */
-+	case JIT_JNOP:
-+		break;
-+	/* PC += off if dst & imm */
-+	case BPF_JSET:
-+		emit(ctx, andi, MIPS_R_T9, dst, (u16)imm);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */
-+	case JIT_JNSET:
-+		emit(ctx, andi, MIPS_R_T9, dst, (u16)imm);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst > imm */
-+	case BPF_JGT:
-+		emit(ctx, sltiu, MIPS_R_T9, dst, imm + 1);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst >= imm */
-+	case BPF_JGE:
-+		emit(ctx, sltiu, MIPS_R_T9, dst, imm);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst < imm */
-+	case BPF_JLT:
-+		emit(ctx, sltiu, MIPS_R_T9, dst, imm);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst <= imm */
-+	case BPF_JLE:
-+		emit(ctx, sltiu, MIPS_R_T9, dst, imm + 1);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst > imm (signed) */
-+	case BPF_JSGT:
-+		emit(ctx, slti, MIPS_R_T9, dst, imm + 1);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst >= imm (signed) */
-+	case BPF_JSGE:
-+		emit(ctx, slti, MIPS_R_T9, dst, imm);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst < imm (signed) */
-+	case BPF_JSLT:
-+		emit(ctx, slti, MIPS_R_T9, dst, imm);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst <= imm (signed) */
-+	case BPF_JSLE:
-+		emit(ctx, slti, MIPS_R_T9, dst, imm + 1);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	}
-+}
-+
-+/* Jump register (32-bit) */
-+void emit_jmp_r(struct jit_context *ctx, u8 dst, u8 src, s32 off, u8 op)
-+{
-+	switch (op) {
-+	/* No-op, used internally for branch optimization */
-+	case JIT_JNOP:
-+		break;
-+	/* PC += off if dst == src */
-+	case BPF_JEQ:
-+		emit(ctx, beq, dst, src, off);
-+		break;
-+	/* PC += off if dst != src */
-+	case BPF_JNE:
-+		emit(ctx, bne, dst, src, off);
-+		break;
-+	/* PC += off if dst & src */
-+	case BPF_JSET:
-+		emit(ctx, and, MIPS_R_T9, dst, src);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */
-+	case JIT_JNSET:
-+		emit(ctx, and, MIPS_R_T9, dst, src);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst > src */
-+	case BPF_JGT:
-+		emit(ctx, sltu, MIPS_R_T9, src, dst);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst >= src */
-+	case BPF_JGE:
-+		emit(ctx, sltu, MIPS_R_T9, dst, src);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst < src */
-+	case BPF_JLT:
-+		emit(ctx, sltu, MIPS_R_T9, dst, src);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst <= src */
-+	case BPF_JLE:
-+		emit(ctx, sltu, MIPS_R_T9, src, dst);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst > src (signed) */
-+	case BPF_JSGT:
-+		emit(ctx, slt, MIPS_R_T9, src, dst);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst >= src (signed) */
-+	case BPF_JSGE:
-+		emit(ctx, slt, MIPS_R_T9, dst, src);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst < src (signed) */
-+	case BPF_JSLT:
-+		emit(ctx, slt, MIPS_R_T9, dst, src);
-+		emit(ctx, bnez, MIPS_R_T9, off);
-+		break;
-+	/* PC += off if dst <= src (signed) */
-+	case BPF_JSLE:
-+		emit(ctx, slt, MIPS_R_T9, src, dst);
-+		emit(ctx, beqz, MIPS_R_T9, off);
-+		break;
-+	}
-+}
-+
-+/* Jump always */
-+int emit_ja(struct jit_context *ctx, s16 off)
-+{
-+	int target = get_target(ctx, ctx->bpf_index + off + 1);
-+
-+	if (target < 0)
-+		return -1;
-+	emit(ctx, j, target);
-+	emit(ctx, nop);
-+	return 0;
-+}
-+
-+/* Jump to epilogue */
-+int emit_exit(struct jit_context *ctx)
-+{
-+	int target = get_target(ctx, ctx->program->len);
-+
-+	if (target < 0)
-+		return -1;
-+	emit(ctx, j, target);
-+	emit(ctx, nop);
-+	return 0;
-+}
-+
-+/* Build the program body from eBPF bytecode */
-+static int build_body(struct jit_context *ctx)
-+{
-+	const struct bpf_prog *prog = ctx->program;
-+	unsigned int i;
-+
-+	ctx->stack_used = 0;
-+	for (i = 0; i < prog->len; i++) {
-+		const struct bpf_insn *insn = &prog->insnsi[i];
-+		u32 *descp = &ctx->descriptors[i];
-+		int ret;
-+
-+		access_reg(ctx, insn->src_reg);
-+		access_reg(ctx, insn->dst_reg);
-+
-+		ctx->bpf_index = i;
-+		if (ctx->target == NULL) {
-+			ctx->changes += INDEX(*descp) != ctx->jit_index;
-+			*descp &= JIT_DESC_CONVERT;
-+			*descp |= ctx->jit_index;
-+		}
-+
-+		ret = build_insn(insn, ctx);
-+		if (ret < 0)
-+			return ret;
-+
-+		if (ret > 0) {
-+			i++;
-+			if (ctx->target == NULL)
-+				descp[1] = ctx->jit_index;
-+		}
-+	}
-+
-+	/* Store the end offset, where the epilogue begins */
-+	ctx->descriptors[prog->len] = ctx->jit_index;
-+	return 0;
-+}
-+
-+/* Set the branch conversion flag on all instructions */
-+static void set_convert_flag(struct jit_context *ctx, bool enable)
-+{
-+	const struct bpf_prog *prog = ctx->program;
-+	u32 flag = enable ? JIT_DESC_CONVERT : 0;
-+	unsigned int i;
-+
-+	for (i = 0; i <= prog->len; i++)
-+		ctx->descriptors[i] = INDEX(ctx->descriptors[i]) | flag;
-+}
-+
-+static void jit_fill_hole(void *area, unsigned int size)
-+{
-+	u32 *p;
-+
-+	/* We are guaranteed to have aligned memory. */
-+	for (p = area; size >= sizeof(u32); size -= sizeof(u32))
-+		uasm_i_break(&p, BRK_BUG); /* Increments p */
-+}
-+
-+bool bpf_jit_needs_zext(void)
-+{
-+	return true;
-+}
-+
-+struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
-+{
-+	struct bpf_prog *tmp, *orig_prog = prog;
-+	struct bpf_binary_header *header = NULL;
-+	struct jit_context ctx;
-+	bool tmp_blinded = false;
-+	unsigned int tmp_idx;
-+	unsigned int image_size;
-+	u8 *image_ptr;
-+	int tries;
-+
-+	/*
-+	 * If BPF JIT was not enabled then we must fall back to
-+	 * the interpreter.
-+	 */
-+	if (!prog->jit_requested)
-+		return orig_prog;
-+	/*
-+	 * If constant blinding was enabled and we failed during blinding
-+	 * then we must fall back to the interpreter. Otherwise, we save
-+	 * the new JITed code.
-+	 */
-+	tmp = bpf_jit_blind_constants(prog);
-+	if (IS_ERR(tmp))
-+		return orig_prog;
-+	if (tmp != prog) {
-+		tmp_blinded = true;
-+		prog = tmp;
-+	}
-+
-+	memset(&ctx, 0, sizeof(ctx));
-+	ctx.program = prog;
-+
-+	/*
-+	 * Not able to allocate memory for descriptors[], then
-+	 * we must fall back to the interpreter
-+	 */
-+	ctx.descriptors = kcalloc(prog->len + 1, sizeof(*ctx.descriptors),
-+				  GFP_KERNEL);
-+	if (ctx.descriptors == NULL)
-+		goto out_err;
-+
-+	/* First pass discovers used resources */
-+	if (build_body(&ctx) < 0)
-+		goto out_err;
-+	/*
-+	 * Second pass computes instruction offsets.
-+	 * If any PC-relative branches are out of range, a sequence of
-+	 * a PC-relative branch + a jump is generated, and we have to
-+	 * try again from the beginning to generate the new offsets.
-+	 * This is done until no additional conversions are necessary.
-+	 * The last two iterations are done with all branches being
-+	 * converted, to guarantee offset table convergence within a
-+	 * fixed number of iterations.
-+	 */
-+	ctx.jit_index = 0;
-+	build_prologue(&ctx);
-+	tmp_idx = ctx.jit_index;
-+
-+	tries = JIT_MAX_ITERATIONS;
-+	do {
-+		ctx.jit_index = tmp_idx;
-+		ctx.changes = 0;
-+		if (tries == 2)
-+			set_convert_flag(&ctx, true);
-+		if (build_body(&ctx) < 0)
-+			goto out_err;
-+	} while (ctx.changes > 0 && --tries > 0);
-+
-+	if (WARN_ONCE(ctx.changes > 0, "JIT offsets failed to converge"))
-+		goto out_err;
-+
-+	build_epilogue(&ctx, MIPS_R_RA);
-+
-+	/* Now we know the size of the structure to make */
-+	image_size = sizeof(u32) * ctx.jit_index;
-+	header = bpf_jit_binary_alloc(image_size, &image_ptr,
-+				      sizeof(u32), jit_fill_hole);
-+	/*
-+	 * Not able to allocate memory for the structure then
-+	 * we must fall back to the interpretation
-+	 */
-+	if (header == NULL)
-+		goto out_err;
-+
-+	/* Actual pass to generate final JIT code */
-+	ctx.target = (u32 *)image_ptr;
-+	ctx.jit_index = 0;
-+
-+	/*
-+	 * If building the JITed code fails somehow,
-+	 * we fall back to the interpretation.
-+	 */
-+	build_prologue(&ctx);
-+	if (build_body(&ctx) < 0)
-+		goto out_err;
-+	build_epilogue(&ctx, MIPS_R_RA);
-+
-+	/* Populate line info meta data */
-+	set_convert_flag(&ctx, false);
-+	bpf_prog_fill_jited_linfo(prog, &ctx.descriptors[1]);
-+
-+	/* Set as read-only exec and flush instruction cache */
-+	bpf_jit_binary_lock_ro(header);
-+	flush_icache_range((unsigned long)header,
-+			   (unsigned long)&ctx.target[ctx.jit_index]);
-+
-+	if (bpf_jit_enable > 1)
-+		bpf_jit_dump(prog->len, image_size, 2, ctx.target);
-+
-+	prog->bpf_func = (void *)ctx.target;
-+	prog->jited = 1;
-+	prog->jited_len = image_size;
-+
-+out:
-+	if (tmp_blinded)
-+		bpf_jit_prog_release_other(prog, prog == orig_prog ?
-+					   tmp : orig_prog);
-+	kfree(ctx.descriptors);
-+	return prog;
-+
-+out_err:
-+	prog = orig_prog;
-+	if (header)
-+		bpf_jit_binary_free(header);
-+	goto out;
-+}
---- /dev/null
-+++ b/arch/mips/net/bpf_jit_comp.h
-@@ -0,0 +1,211 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/*
-+ * Just-In-Time compiler for eBPF bytecode on 32-bit and 64-bit MIPS.
-+ *
-+ * Copyright (c) 2021 Anyfi Networks AB.
-+ * Author: Johan Almbladh <johan.almbladh@gmail.com>
-+ *
-+ * Based on code and ideas from
-+ * Copyright (c) 2017 Cavium, Inc.
-+ * Copyright (c) 2017 Shubham Bansal <illusionist.neo@gmail.com>
-+ * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
-+ */
-+
-+#ifndef _BPF_JIT_COMP_H
-+#define _BPF_JIT_COMP_H
-+
-+/* MIPS registers */
-+#define MIPS_R_ZERO	0   /* Const zero */
-+#define MIPS_R_AT	1   /* Asm temp   */
-+#define MIPS_R_V0	2   /* Result     */
-+#define MIPS_R_V1	3   /* Result     */
-+#define MIPS_R_A0	4   /* Argument   */
-+#define MIPS_R_A1	5   /* Argument   */
-+#define MIPS_R_A2	6   /* Argument   */
-+#define MIPS_R_A3	7   /* Argument   */
-+#define MIPS_R_A4	8   /* Arg (n64)  */
-+#define MIPS_R_A5	9   /* Arg (n64)  */
-+#define MIPS_R_A6	10  /* Arg (n64)  */
-+#define MIPS_R_A7	11  /* Arg (n64)  */
-+#define MIPS_R_T0	8   /* Temp (o32) */
-+#define MIPS_R_T1	9   /* Temp (o32) */
-+#define MIPS_R_T2	10  /* Temp (o32) */
-+#define MIPS_R_T3	11  /* Temp (o32) */
-+#define MIPS_R_T4	12  /* Temporary  */
-+#define MIPS_R_T5	13  /* Temporary  */
-+#define MIPS_R_T6	14  /* Temporary  */
-+#define MIPS_R_T7	15  /* Temporary  */
-+#define MIPS_R_S0	16  /* Saved      */
-+#define MIPS_R_S1	17  /* Saved      */
-+#define MIPS_R_S2	18  /* Saved      */
-+#define MIPS_R_S3	19  /* Saved      */
-+#define MIPS_R_S4	20  /* Saved      */
-+#define MIPS_R_S5	21  /* Saved      */
-+#define MIPS_R_S6	22  /* Saved      */
-+#define MIPS_R_S7	23  /* Saved      */
-+#define MIPS_R_T8	24  /* Temporary  */
-+#define MIPS_R_T9	25  /* Temporary  */
-+/*      MIPS_R_K0	26     Reserved   */
-+/*      MIPS_R_K1	27     Reserved   */
-+#define MIPS_R_GP	28  /* Global ptr */
-+#define MIPS_R_SP	29  /* Stack ptr  */
-+#define MIPS_R_FP	30  /* Frame ptr  */
-+#define MIPS_R_RA	31  /* Return     */
-+
-+/*
-+ * Jump address mask for immediate jumps. The four most significant bits
-+ * must be equal to PC.
-+ */
-+#define MIPS_JMP_MASK	0x0fffffffUL
-+
-+/* Maximum number of iterations in offset table computation */
-+#define JIT_MAX_ITERATIONS	8
-+
-+/*
-+ * Jump pseudo-instructions used internally
-+ * for branch conversion and branch optimization.
-+ */
-+#define JIT_JNSET	0xe0
-+#define JIT_JNOP	0xf0
-+
-+/* Descriptor flag for PC-relative branch conversion */
-+#define JIT_DESC_CONVERT	BIT(31)
-+
-+/* JIT context for an eBPF program */
-+struct jit_context {
-+	struct bpf_prog *program;     /* The eBPF program being JITed        */
-+	u32 *descriptors;             /* eBPF to JITed CPU insn descriptors  */
-+	u32 *target;                  /* JITed code buffer                   */
-+	u32 bpf_index;                /* Index of current BPF program insn   */
-+	u32 jit_index;                /* Index of current JIT target insn    */
-+	u32 changes;                  /* Number of PC-relative branch conv   */
-+	u32 accessed;                 /* Bit mask of read eBPF registers     */
-+	u32 clobbered;                /* Bit mask of modified CPU registers  */
-+	u32 stack_size;               /* Total allocated stack size in bytes */
-+	u32 saved_size;               /* Size of callee-saved registers      */
-+	u32 stack_used;               /* Stack size used for function calls  */
-+};
-+
-+/* Emit the instruction if the JIT memory space has been allocated */
-+#define emit(ctx, func, ...)					\
-+do {								\
-+	if ((ctx)->target != NULL) {				\
-+		u32 *p = &(ctx)->target[ctx->jit_index];	\
-+		uasm_i_##func(&p, ##__VA_ARGS__);		\
-+	}							\
-+	(ctx)->jit_index++;					\
-+} while (0)
-+
-+/*
-+ * Mark a BPF register as accessed, it needs to be
-+ * initialized by the program if expected, e.g. FP.
-+ */
-+static inline void access_reg(struct jit_context *ctx, u8 reg)
-+{
-+	ctx->accessed |= BIT(reg);
-+}
-+
-+/*
-+ * Mark a CPU register as clobbered, it needs to be
-+ * saved/restored by the program if callee-saved.
-+ */
-+static inline void clobber_reg(struct jit_context *ctx, u8 reg)
-+{
-+	ctx->clobbered |= BIT(reg);
-+}
-+
-+/*
-+ * Push registers on the stack, starting at a given depth from the stack
-+ * pointer and increasing. The next depth to be written is returned.
-+ */
-+int push_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth);
-+
-+/*
-+ * Pop registers from the stack, starting at a given depth from the stack
-+ * pointer and increasing. The next depth to be read is returned.
-+ */
-+int pop_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth);
-+
-+/* Compute the 28-bit jump target address from a BPF program location */
-+int get_target(struct jit_context *ctx, u32 loc);
-+
-+/* Compute the PC-relative offset to relative BPF program offset */
-+int get_offset(const struct jit_context *ctx, int off);
-+
-+/* dst = imm (32-bit) */
-+void emit_mov_i(struct jit_context *ctx, u8 dst, s32 imm);
-+
-+/* dst = src (32-bit) */
-+void emit_mov_r(struct jit_context *ctx, u8 dst, u8 src);
-+
-+/* Validate ALU/ALU64 immediate range */
-+bool valid_alu_i(u8 op, s32 imm);
-+
-+/* Rewrite ALU/ALU64 immediate operation */
-+bool rewrite_alu_i(u8 op, s32 imm, u8 *alu, s32 *val);
-+
-+/* ALU immediate operation (32-bit) */
-+void emit_alu_i(struct jit_context *ctx, u8 dst, s32 imm, u8 op);
-+
-+/* ALU register operation (32-bit) */
-+void emit_alu_r(struct jit_context *ctx, u8 dst, u8 src, u8 op);
-+
-+/* Atomic read-modify-write (32-bit) */
-+void emit_atomic_r(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 code);
-+
-+/* Atomic compare-and-exchange (32-bit) */
-+void emit_cmpxchg_r(struct jit_context *ctx, u8 dst, u8 src, u8 res, s16 off);
-+
-+/* Swap bytes and truncate a register word or half word */
-+void emit_bswap_r(struct jit_context *ctx, u8 dst, u32 width);
-+
-+/* Validate JMP/JMP32 immediate range */
-+bool valid_jmp_i(u8 op, s32 imm);
-+
-+/* Prepare a PC-relative jump operation with immediate conditional */
-+void setup_jmp_i(struct jit_context *ctx, s32 imm, u8 width,
-+		 u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off);
-+
-+/* Prepare a PC-relative jump operation with register conditional */
-+void setup_jmp_r(struct jit_context *ctx, bool same_reg,
-+		 u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off);
-+
-+/* Finish a PC-relative jump operation */
-+int finish_jmp(struct jit_context *ctx, u8 jit_op, s16 bpf_off);
-+
-+/* Conditional JMP/JMP32 immediate */
-+void emit_jmp_i(struct jit_context *ctx, u8 dst, s32 imm, s32 off, u8 op);
-+
-+/* Conditional JMP/JMP32 register */
-+void emit_jmp_r(struct jit_context *ctx, u8 dst, u8 src, s32 off, u8 op);
-+
-+/* Jump always */
-+int emit_ja(struct jit_context *ctx, s16 off);
-+
-+/* Jump to epilogue */
-+int emit_exit(struct jit_context *ctx);
-+
-+/*
-+ * Build program prologue to set up the stack and registers.
-+ * This function is implemented separately for 32-bit and 64-bit JITs.
-+ */
-+void build_prologue(struct jit_context *ctx);
-+
-+/*
-+ * Build the program epilogue to restore the stack and registers.
-+ * This function is implemented separately for 32-bit and 64-bit JITs.
-+ */
-+void build_epilogue(struct jit_context *ctx, int dest_reg);
-+
-+/*
-+ * Convert an eBPF instruction to native instruction, i.e
-+ * JITs an eBPF instruction.
-+ * Returns :
-+ *	0  - Successfully JITed an 8-byte eBPF instruction
-+ *	>0 - Successfully JITed a 16-byte eBPF instruction
-+ *	<0 - Failed to JIT.
-+ * This function is implemented separately for 32-bit and 64-bit JITs.
-+ */
-+int build_insn(const struct bpf_insn *insn, struct jit_context *ctx);
-+
-+#endif /* _BPF_JIT_COMP_H */
---- /dev/null
-+++ b/arch/mips/net/bpf_jit_comp32.c
-@@ -0,0 +1,1741 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Just-In-Time compiler for eBPF bytecode on MIPS.
-+ * Implementation of JIT functions for 32-bit CPUs.
-+ *
-+ * Copyright (c) 2021 Anyfi Networks AB.
-+ * Author: Johan Almbladh <johan.almbladh@gmail.com>
-+ *
-+ * Based on code and ideas from
-+ * Copyright (c) 2017 Cavium, Inc.
-+ * Copyright (c) 2017 Shubham Bansal <illusionist.neo@gmail.com>
-+ * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
-+ */
-+
-+#include <linux/math64.h>
-+#include <linux/errno.h>
-+#include <linux/filter.h>
-+#include <linux/bpf.h>
-+#include <asm/cpu-features.h>
-+#include <asm/isa-rev.h>
-+#include <asm/uasm.h>
-+
-+#include "bpf_jit_comp.h"
-+
-+/* MIPS a4-a7 are not available in the o32 ABI */
-+#undef MIPS_R_A4
-+#undef MIPS_R_A5
-+#undef MIPS_R_A6
-+#undef MIPS_R_A7
-+
-+/* Stack is 8-byte aligned in o32 ABI */
-+#define MIPS_STACK_ALIGNMENT 8
-+
-+/*
-+ * The top 16 bytes of a stack frame is reserved for the callee in O32 ABI.
-+ * This corresponds to stack space for register arguments a0-a3.
-+ */
-+#define JIT_RESERVED_STACK 16
-+
-+/* Temporary 64-bit register used by JIT */
-+#define JIT_REG_TMP MAX_BPF_JIT_REG
-+
-+/*
-+ * Number of prologue bytes to skip when doing a tail call.
-+ * Tail call count (TCC) initialization (8 bytes) always, plus
-+ * R0-to-v0 assignment (4 bytes) if big endian.
-+ */
-+#ifdef __BIG_ENDIAN
-+#define JIT_TCALL_SKIP 12
-+#else
-+#define JIT_TCALL_SKIP 8
-+#endif
-+
-+/* CPU registers holding the callee return value */
-+#define JIT_RETURN_REGS	  \
-+	(BIT(MIPS_R_V0) | \
-+	 BIT(MIPS_R_V1))
-+
-+/* CPU registers arguments passed to callee directly */
-+#define JIT_ARG_REGS      \
-+	(BIT(MIPS_R_A0) | \
-+	 BIT(MIPS_R_A1) | \
-+	 BIT(MIPS_R_A2) | \
-+	 BIT(MIPS_R_A3))
-+
-+/* CPU register arguments passed to callee on stack */
-+#define JIT_STACK_REGS    \
-+	(BIT(MIPS_R_T0) | \
-+	 BIT(MIPS_R_T1) | \
-+	 BIT(MIPS_R_T2) | \
-+	 BIT(MIPS_R_T3) | \
-+	 BIT(MIPS_R_T4) | \
-+	 BIT(MIPS_R_T5))
-+
-+/* Caller-saved CPU registers */
-+#define JIT_CALLER_REGS    \
-+	(JIT_RETURN_REGS | \
-+	 JIT_ARG_REGS    | \
-+	 JIT_STACK_REGS)
-+
-+/* Callee-saved CPU registers */
-+#define JIT_CALLEE_REGS   \
-+	(BIT(MIPS_R_S0) | \
-+	 BIT(MIPS_R_S1) | \
-+	 BIT(MIPS_R_S2) | \
-+	 BIT(MIPS_R_S3) | \
-+	 BIT(MIPS_R_S4) | \
-+	 BIT(MIPS_R_S5) | \
-+	 BIT(MIPS_R_S6) | \
-+	 BIT(MIPS_R_S7) | \
-+	 BIT(MIPS_R_GP) | \
-+	 BIT(MIPS_R_FP) | \
-+	 BIT(MIPS_R_RA))
-+
-+/*
-+ * Mapping of 64-bit eBPF registers to 32-bit native MIPS registers.
-+ *
-+ * 1) Native register pairs are ordered according to CPU endiannes, following
-+ *    the MIPS convention for passing 64-bit arguments and return values.
-+ * 2) The eBPF return value, arguments and callee-saved registers are mapped
-+ *    to their native MIPS equivalents.
-+ * 3) Since the 32 highest bits in the eBPF FP register are always zero,
-+ *    only one general-purpose register is actually needed for the mapping.
-+ *    We use the fp register for this purpose, and map the highest bits to
-+ *    the MIPS register r0 (zero).
-+ * 4) We use the MIPS gp and at registers as internal temporary registers
-+ *    for constant blinding. The gp register is callee-saved.
-+ * 5) One 64-bit temporary register is mapped for use when sign-extending
-+ *    immediate operands. MIPS registers t6-t9 are available to the JIT
-+ *    for as temporaries when implementing complex 64-bit operations.
-+ *
-+ * With this scheme all eBPF registers are being mapped to native MIPS
-+ * registers without having to use any stack scratch space. The direct
-+ * register mapping (2) simplifies the handling of function calls.
-+ */
-+static const u8 bpf2mips32[][2] = {
-+	/* Return value from in-kernel function, and exit value from eBPF */
-+	[BPF_REG_0] = {MIPS_R_V1, MIPS_R_V0},
-+	/* Arguments from eBPF program to in-kernel function */
-+	[BPF_REG_1] = {MIPS_R_A1, MIPS_R_A0},
-+	[BPF_REG_2] = {MIPS_R_A3, MIPS_R_A2},
-+	/* Remaining arguments, to be passed on the stack per O32 ABI */
-+	[BPF_REG_3] = {MIPS_R_T1, MIPS_R_T0},
-+	[BPF_REG_4] = {MIPS_R_T3, MIPS_R_T2},
-+	[BPF_REG_5] = {MIPS_R_T5, MIPS_R_T4},
-+	/* Callee-saved registers that in-kernel function will preserve */
-+	[BPF_REG_6] = {MIPS_R_S1, MIPS_R_S0},
-+	[BPF_REG_7] = {MIPS_R_S3, MIPS_R_S2},
-+	[BPF_REG_8] = {MIPS_R_S5, MIPS_R_S4},
-+	[BPF_REG_9] = {MIPS_R_S7, MIPS_R_S6},
-+	/* Read-only frame pointer to access the eBPF stack */
-+#ifdef __BIG_ENDIAN
-+	[BPF_REG_FP] = {MIPS_R_FP, MIPS_R_ZERO},
-+#else
-+	[BPF_REG_FP] = {MIPS_R_ZERO, MIPS_R_FP},
-+#endif
-+	/* Temporary register for blinding constants */
-+	[BPF_REG_AX] = {MIPS_R_GP, MIPS_R_AT},
-+	/* Temporary register for internal JIT use */
-+	[JIT_REG_TMP] = {MIPS_R_T7, MIPS_R_T6},
-+};
-+
-+/* Get low CPU register for a 64-bit eBPF register mapping */
-+static inline u8 lo(const u8 reg[])
-+{
-+#ifdef __BIG_ENDIAN
-+	return reg[0];
-+#else
-+	return reg[1];
-+#endif
-+}
-+
-+/* Get high CPU register for a 64-bit eBPF register mapping */
-+static inline u8 hi(const u8 reg[])
-+{
-+#ifdef __BIG_ENDIAN
-+	return reg[1];
-+#else
-+	return reg[0];
-+#endif
-+}
-+
-+/*
-+ * Mark a 64-bit CPU register pair as clobbered, it needs to be
-+ * saved/restored by the program if callee-saved.
-+ */
-+static void clobber_reg64(struct jit_context *ctx, const u8 reg[])
-+{
-+	clobber_reg(ctx, reg[0]);
-+	clobber_reg(ctx, reg[1]);
-+}
-+
-+/* dst = imm (sign-extended) */
-+static void emit_mov_se_i64(struct jit_context *ctx, const u8 dst[], s32 imm)
-+{
-+	emit_mov_i(ctx, lo(dst), imm);
-+	if (imm < 0)
-+		emit(ctx, addiu, hi(dst), MIPS_R_ZERO, -1);
-+	else
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* Zero extension, if verifier does not do it for us  */
-+static void emit_zext_ver(struct jit_context *ctx, const u8 dst[])
-+{
-+	if (!ctx->program->aux->verifier_zext) {
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		clobber_reg(ctx, hi(dst));
-+	}
-+}
-+
-+/* Load delay slot, if ISA mandates it */
-+static void emit_load_delay(struct jit_context *ctx)
-+{
-+	if (!cpu_has_mips_2_3_4_5_r)
-+		emit(ctx, nop);
-+}
-+
-+/* ALU immediate operation (64-bit) */
-+static void emit_alu_i64(struct jit_context *ctx,
-+			 const u8 dst[], s32 imm, u8 op)
-+{
-+	u8 src = MIPS_R_T6;
-+
-+	/*
-+	 * ADD/SUB with all but the max negative imm can be handled by
-+	 * inverting the operation and the imm value, saving one insn.
-+	 */
-+	if (imm > S32_MIN && imm < 0)
-+		switch (op) {
-+		case BPF_ADD:
-+			op = BPF_SUB;
-+			imm = -imm;
-+			break;
-+		case BPF_SUB:
-+			op = BPF_ADD;
-+			imm = -imm;
-+			break;
-+		}
-+
-+	/* Move immediate to temporary register */
-+	emit_mov_i(ctx, src, imm);
-+
-+	switch (op) {
-+	/* dst = dst + imm */
-+	case BPF_ADD:
-+		emit(ctx, addu, lo(dst), lo(dst), src);
-+		emit(ctx, sltu, MIPS_R_T9, lo(dst), src);
-+		emit(ctx, addu, hi(dst), hi(dst), MIPS_R_T9);
-+		if (imm < 0)
-+			emit(ctx, addiu, hi(dst), hi(dst), -1);
-+		break;
-+	/* dst = dst - imm */
-+	case BPF_SUB:
-+		emit(ctx, sltu, MIPS_R_T9, lo(dst), src);
-+		emit(ctx, subu, lo(dst), lo(dst), src);
-+		emit(ctx, subu, hi(dst), hi(dst), MIPS_R_T9);
-+		if (imm < 0)
-+			emit(ctx, addiu, hi(dst), hi(dst), 1);
-+		break;
-+	/* dst = dst | imm */
-+	case BPF_OR:
-+		emit(ctx, or, lo(dst), lo(dst), src);
-+		if (imm < 0)
-+			emit(ctx, addiu, hi(dst), MIPS_R_ZERO, -1);
-+		break;
-+	/* dst = dst & imm */
-+	case BPF_AND:
-+		emit(ctx, and, lo(dst), lo(dst), src);
-+		if (imm >= 0)
-+			emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		break;
-+	/* dst = dst ^ imm */
-+	case BPF_XOR:
-+		emit(ctx, xor, lo(dst), lo(dst), src);
-+		if (imm < 0) {
-+			emit(ctx, subu, hi(dst), MIPS_R_ZERO, hi(dst));
-+			emit(ctx, addiu, hi(dst), hi(dst), -1);
-+		}
-+		break;
-+	}
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* ALU register operation (64-bit) */
-+static void emit_alu_r64(struct jit_context *ctx,
-+			 const u8 dst[], const u8 src[], u8 op)
-+{
-+	switch (BPF_OP(op)) {
-+	/* dst = dst + src */
-+	case BPF_ADD:
-+		if (src == dst) {
-+			emit(ctx, srl, MIPS_R_T9, lo(dst), 31);
-+			emit(ctx, addu, lo(dst), lo(dst), lo(dst));
-+		} else {
-+			emit(ctx, addu, lo(dst), lo(dst), lo(src));
-+			emit(ctx, sltu, MIPS_R_T9, lo(dst), lo(src));
-+		}
-+		emit(ctx, addu, hi(dst), hi(dst), hi(src));
-+		emit(ctx, addu, hi(dst), hi(dst), MIPS_R_T9);
-+		break;
-+	/* dst = dst - src */
-+	case BPF_SUB:
-+		emit(ctx, sltu, MIPS_R_T9, lo(dst), lo(src));
-+		emit(ctx, subu, lo(dst), lo(dst), lo(src));
-+		emit(ctx, subu, hi(dst), hi(dst), hi(src));
-+		emit(ctx, subu, hi(dst), hi(dst), MIPS_R_T9);
-+		break;
-+	/* dst = dst | src */
-+	case BPF_OR:
-+		emit(ctx, or, lo(dst), lo(dst), lo(src));
-+		emit(ctx, or, hi(dst), hi(dst), hi(src));
-+		break;
-+	/* dst = dst & src */
-+	case BPF_AND:
-+		emit(ctx, and, lo(dst), lo(dst), lo(src));
-+		emit(ctx, and, hi(dst), hi(dst), hi(src));
-+		break;
-+	/* dst = dst ^ src */
-+	case BPF_XOR:
-+		emit(ctx, xor, lo(dst), lo(dst), lo(src));
-+		emit(ctx, xor, hi(dst), hi(dst), hi(src));
-+		break;
-+	}
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* ALU invert (64-bit) */
-+static void emit_neg_i64(struct jit_context *ctx, const u8 dst[])
-+{
-+	emit(ctx, sltu, MIPS_R_T9, MIPS_R_ZERO, lo(dst));
-+	emit(ctx, subu, lo(dst), MIPS_R_ZERO, lo(dst));
-+	emit(ctx, subu, hi(dst), MIPS_R_ZERO, hi(dst));
-+	emit(ctx, subu, hi(dst), hi(dst), MIPS_R_T9);
-+
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* ALU shift immediate (64-bit) */
-+static void emit_shift_i64(struct jit_context *ctx,
-+			   const u8 dst[], u32 imm, u8 op)
-+{
-+	switch (BPF_OP(op)) {
-+	/* dst = dst << imm */
-+	case BPF_LSH:
-+		if (imm < 32) {
-+			emit(ctx, srl, MIPS_R_T9, lo(dst), 32 - imm);
-+			emit(ctx, sll, lo(dst), lo(dst), imm);
-+			emit(ctx, sll, hi(dst), hi(dst), imm);
-+			emit(ctx, or, hi(dst), hi(dst), MIPS_R_T9);
-+		} else {
-+			emit(ctx, sll, hi(dst), lo(dst), imm - 32);
-+			emit(ctx, move, lo(dst), MIPS_R_ZERO);
-+		}
-+		break;
-+	/* dst = dst >> imm */
-+	case BPF_RSH:
-+		if (imm < 32) {
-+			emit(ctx, sll, MIPS_R_T9, hi(dst), 32 - imm);
-+			emit(ctx, srl, lo(dst), lo(dst), imm);
-+			emit(ctx, srl, hi(dst), hi(dst), imm);
-+			emit(ctx, or, lo(dst), lo(dst), MIPS_R_T9);
-+		} else {
-+			emit(ctx, srl, lo(dst), hi(dst), imm - 32);
-+			emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		}
-+		break;
-+	/* dst = dst >> imm (arithmetic) */
-+	case BPF_ARSH:
-+		if (imm < 32) {
-+			emit(ctx, sll, MIPS_R_T9, hi(dst), 32 - imm);
-+			emit(ctx, srl, lo(dst), lo(dst), imm);
-+			emit(ctx, sra, hi(dst), hi(dst), imm);
-+			emit(ctx, or, lo(dst), lo(dst), MIPS_R_T9);
-+		} else {
-+			emit(ctx, sra, lo(dst), hi(dst), imm - 32);
-+			emit(ctx, sra, hi(dst), hi(dst), 31);
-+		}
-+		break;
-+	}
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* ALU shift register (64-bit) */
-+static void emit_shift_r64(struct jit_context *ctx,
-+			   const u8 dst[], u8 src, u8 op)
-+{
-+	u8 t1 = MIPS_R_T8;
-+	u8 t2 = MIPS_R_T9;
-+
-+	emit(ctx, andi, t1, src, 32);              /* t1 = src & 32          */
-+	emit(ctx, beqz, t1, 16);                   /* PC += 16 if t1 == 0    */
-+	emit(ctx, nor, t2, src, MIPS_R_ZERO);      /* t2 = ~src (delay slot) */
-+
-+	switch (BPF_OP(op)) {
-+	/* dst = dst << src */
-+	case BPF_LSH:
-+		/* Next: shift >= 32 */
-+		emit(ctx, sllv, hi(dst), lo(dst), src);    /* dh = dl << src */
-+		emit(ctx, move, lo(dst), MIPS_R_ZERO);     /* dl = 0         */
-+		emit(ctx, b, 20);                          /* PC += 20       */
-+		/* +16: shift < 32 */
-+		emit(ctx, srl, t1, lo(dst), 1);            /* t1 = dl >> 1   */
-+		emit(ctx, srlv, t1, t1, t2);               /* t1 = t1 >> t2  */
-+		emit(ctx, sllv, lo(dst), lo(dst), src);    /* dl = dl << src */
-+		emit(ctx, sllv, hi(dst), hi(dst), src);    /* dh = dh << src */
-+		emit(ctx, or, hi(dst), hi(dst), t1);       /* dh = dh | t1   */
-+		break;
-+	/* dst = dst >> src */
-+	case BPF_RSH:
-+		/* Next: shift >= 32 */
-+		emit(ctx, srlv, lo(dst), hi(dst), src);    /* dl = dh >> src */
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);     /* dh = 0         */
-+		emit(ctx, b, 20);                          /* PC += 20       */
-+		/* +16: shift < 32 */
-+		emit(ctx, sll, t1, hi(dst), 1);            /* t1 = dl << 1   */
-+		emit(ctx, sllv, t1, t1, t2);               /* t1 = t1 << t2  */
-+		emit(ctx, srlv, lo(dst), lo(dst), src);    /* dl = dl >> src */
-+		emit(ctx, srlv, hi(dst), hi(dst), src);    /* dh = dh >> src */
-+		emit(ctx, or, lo(dst), lo(dst), t1);       /* dl = dl | t1   */
-+		break;
-+	/* dst = dst >> src (arithmetic) */
-+	case BPF_ARSH:
-+		/* Next: shift >= 32 */
-+		emit(ctx, srav, lo(dst), hi(dst), src);   /* dl = dh >>a src */
-+		emit(ctx, sra, hi(dst), hi(dst), 31);     /* dh = dh >>a 31  */
-+		emit(ctx, b, 20);                         /* PC += 20        */
-+		/* +16: shift < 32 */
-+		emit(ctx, sll, t1, hi(dst), 1);           /* t1 = dl << 1    */
-+		emit(ctx, sllv, t1, t1, t2);              /* t1 = t1 << t2   */
-+		emit(ctx, srlv, lo(dst), lo(dst), src);   /* dl = dl >>a src */
-+		emit(ctx, srav, hi(dst), hi(dst), src);   /* dh = dh >> src  */
-+		emit(ctx, or, lo(dst), lo(dst), t1);      /* dl = dl | t1    */
-+		break;
-+	}
-+
-+	/* +20: Done */
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* ALU mul immediate (64x32-bit) */
-+static void emit_mul_i64(struct jit_context *ctx, const u8 dst[], s32 imm)
-+{
-+	u8 src = MIPS_R_T6;
-+	u8 tmp = MIPS_R_T9;
-+
-+	switch (imm) {
-+	/* dst = dst * 1 is a no-op */
-+	case 1:
-+		break;
-+	/* dst = dst * -1 */
-+	case -1:
-+		emit_neg_i64(ctx, dst);
-+		break;
-+	case 0:
-+		emit_mov_r(ctx, lo(dst), MIPS_R_ZERO);
-+		emit_mov_r(ctx, hi(dst), MIPS_R_ZERO);
-+		break;
-+	/* Full 64x32 multiply */
-+	default:
-+		/* hi(dst) = hi(dst) * src(imm) */
-+		emit_mov_i(ctx, src, imm);
-+		if (cpu_has_mips32r1 || cpu_has_mips32r6) {
-+			emit(ctx, mul, hi(dst), hi(dst), src);
-+		} else {
-+			emit(ctx, multu, hi(dst), src);
-+			emit(ctx, mflo, hi(dst));
-+		}
-+
-+		/* hi(dst) = hi(dst) - lo(dst) */
-+		if (imm < 0)
-+			emit(ctx, subu, hi(dst), hi(dst), lo(dst));
-+
-+		/* tmp = lo(dst) * src(imm) >> 32 */
-+		/* lo(dst) = lo(dst) * src(imm) */
-+		if (cpu_has_mips32r6) {
-+			emit(ctx, muhu, tmp, lo(dst), src);
-+			emit(ctx, mulu, lo(dst), lo(dst), src);
-+		} else {
-+			emit(ctx, multu, lo(dst), src);
-+			emit(ctx, mflo, lo(dst));
-+			emit(ctx, mfhi, tmp);
-+		}
-+
-+		/* hi(dst) += tmp */
-+		emit(ctx, addu, hi(dst), hi(dst), tmp);
-+		clobber_reg64(ctx, dst);
-+		break;
-+	}
-+}
-+
-+/* ALU mul register (64x64-bit) */
-+static void emit_mul_r64(struct jit_context *ctx,
-+			 const u8 dst[], const u8 src[])
-+{
-+	u8 acc = MIPS_R_T8;
-+	u8 tmp = MIPS_R_T9;
-+
-+	/* acc = hi(dst) * lo(src) */
-+	if (cpu_has_mips32r1 || cpu_has_mips32r6) {
-+		emit(ctx, mul, acc, hi(dst), lo(src));
-+	} else {
-+		emit(ctx, multu, hi(dst), lo(src));
-+		emit(ctx, mflo, acc);
-+	}
-+
-+	/* tmp = lo(dst) * hi(src) */
-+	if (cpu_has_mips32r1 || cpu_has_mips32r6) {
-+		emit(ctx, mul, tmp, lo(dst), hi(src));
-+	} else {
-+		emit(ctx, multu, lo(dst), hi(src));
-+		emit(ctx, mflo, tmp);
-+	}
-+
-+	/* acc += tmp */
-+	emit(ctx, addu, acc, acc, tmp);
-+
-+	/* tmp = lo(dst) * lo(src) >> 32 */
-+	/* lo(dst) = lo(dst) * lo(src) */
-+	if (cpu_has_mips32r6) {
-+		emit(ctx, muhu, tmp, lo(dst), lo(src));
-+		emit(ctx, mulu, lo(dst), lo(dst), lo(src));
-+	} else {
-+		emit(ctx, multu, lo(dst), lo(src));
-+		emit(ctx, mflo, lo(dst));
-+		emit(ctx, mfhi, tmp);
-+	}
-+
-+	/* hi(dst) = acc + tmp */
-+	emit(ctx, addu, hi(dst), acc, tmp);
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* Helper function for 64-bit modulo */
-+static u64 jit_mod64(u64 a, u64 b)
-+{
-+	u64 rem;
-+
-+	div64_u64_rem(a, b, &rem);
-+	return rem;
-+}
-+
-+/* ALU div/mod register (64-bit) */
-+static void emit_divmod_r64(struct jit_context *ctx,
-+			    const u8 dst[], const u8 src[], u8 op)
-+{
-+	const u8 *r0 = bpf2mips32[BPF_REG_0]; /* Mapped to v0-v1 */
-+	const u8 *r1 = bpf2mips32[BPF_REG_1]; /* Mapped to a0-a1 */
-+	const u8 *r2 = bpf2mips32[BPF_REG_2]; /* Mapped to a2-a3 */
-+	int exclude, k;
-+	u32 addr = 0;
-+
-+	/* Push caller-saved registers on stack */
-+	push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS,
-+		  0, JIT_RESERVED_STACK);
-+
-+	/* Put 64-bit arguments 1 and 2 in registers a0-a3 */
-+	for (k = 0; k < 2; k++) {
-+		emit(ctx, move, MIPS_R_T9, src[k]);
-+		emit(ctx, move, r1[k], dst[k]);
-+		emit(ctx, move, r2[k], MIPS_R_T9);
-+	}
-+
-+	/* Emit function call */
-+	switch (BPF_OP(op)) {
-+	/* dst = dst / src */
-+	case BPF_DIV:
-+		addr = (u32)&div64_u64;
-+		break;
-+	/* dst = dst % src */
-+	case BPF_MOD:
-+		addr = (u32)&jit_mod64;
-+		break;
-+	}
-+	emit_mov_i(ctx, MIPS_R_T9, addr);
-+	emit(ctx, jalr, MIPS_R_RA, MIPS_R_T9);
-+	emit(ctx, nop); /* Delay slot */
-+
-+	/* Store the 64-bit result in dst */
-+	emit(ctx, move, dst[0], r0[0]);
-+	emit(ctx, move, dst[1], r0[1]);
-+
-+	/* Restore caller-saved registers, excluding the computed result */
-+	exclude = BIT(lo(dst)) | BIT(hi(dst));
-+	pop_regs(ctx, ctx->clobbered & JIT_CALLER_REGS,
-+		 exclude, JIT_RESERVED_STACK);
-+	emit_load_delay(ctx);
-+
-+	clobber_reg64(ctx, dst);
-+	clobber_reg(ctx, MIPS_R_V0);
-+	clobber_reg(ctx, MIPS_R_V1);
-+	clobber_reg(ctx, MIPS_R_RA);
-+}
-+
-+/* Swap bytes in a register word */
-+static void emit_swap8_r(struct jit_context *ctx, u8 dst, u8 src, u8 mask)
-+{
-+	u8 tmp = MIPS_R_T9;
-+
-+	emit(ctx, and, tmp, src, mask); /* tmp = src & 0x00ff00ff */
-+	emit(ctx, sll, tmp, tmp, 8);    /* tmp = tmp << 8         */
-+	emit(ctx, srl, dst, src, 8);    /* dst = src >> 8         */
-+	emit(ctx, and, dst, dst, mask); /* dst = dst & 0x00ff00ff */
-+	emit(ctx, or,  dst, dst, tmp);  /* dst = dst | tmp        */
-+}
-+
-+/* Swap half words in a register word */
-+static void emit_swap16_r(struct jit_context *ctx, u8 dst, u8 src)
-+{
-+	u8 tmp = MIPS_R_T9;
-+
-+	emit(ctx, sll, tmp, src, 16);  /* tmp = src << 16 */
-+	emit(ctx, srl, dst, src, 16);  /* dst = src >> 16 */
-+	emit(ctx, or,  dst, dst, tmp); /* dst = dst | tmp */
-+}
-+
-+/* Swap bytes and truncate a register double word, word or half word */
-+static void emit_bswap_r64(struct jit_context *ctx, const u8 dst[], u32 width)
-+{
-+	u8 tmp = MIPS_R_T8;
-+
-+	switch (width) {
-+	/* Swap bytes in a double word */
-+	case 64:
-+		if (cpu_has_mips32r2 || cpu_has_mips32r6) {
-+			emit(ctx, rotr, tmp, hi(dst), 16);
-+			emit(ctx, rotr, hi(dst), lo(dst), 16);
-+			emit(ctx, wsbh, lo(dst), tmp);
-+			emit(ctx, wsbh, hi(dst), hi(dst));
-+		} else {
-+			emit_swap16_r(ctx, tmp, lo(dst));
-+			emit_swap16_r(ctx, lo(dst), hi(dst));
-+			emit(ctx, move, hi(dst), tmp);
-+
-+			emit(ctx, lui, tmp, 0xff);      /* tmp = 0x00ff0000 */
-+			emit(ctx, ori, tmp, tmp, 0xff); /* tmp = 0x00ff00ff */
-+			emit_swap8_r(ctx, lo(dst), lo(dst), tmp);
-+			emit_swap8_r(ctx, hi(dst), hi(dst), tmp);
-+		}
-+		break;
-+	/* Swap bytes in a word */
-+	/* Swap bytes in a half word */
-+	case 32:
-+	case 16:
-+		emit_bswap_r(ctx, lo(dst), width);
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		break;
-+	}
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* Truncate a register double word, word or half word */
-+static void emit_trunc_r64(struct jit_context *ctx, const u8 dst[], u32 width)
-+{
-+	switch (width) {
-+	case 64:
-+		break;
-+	/* Zero-extend a word */
-+	case 32:
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		clobber_reg(ctx, hi(dst));
-+		break;
-+	/* Zero-extend a half word */
-+	case 16:
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		emit(ctx, andi, lo(dst), lo(dst), 0xffff);
-+		clobber_reg64(ctx, dst);
-+		break;
-+	}
-+}
-+
-+/* Load operation: dst = *(size*)(src + off) */
-+static void emit_ldx(struct jit_context *ctx,
-+		     const u8 dst[], u8 src, s16 off, u8 size)
-+{
-+	switch (size) {
-+	/* Load a byte */
-+	case BPF_B:
-+		emit(ctx, lbu, lo(dst), off, src);
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		break;
-+	/* Load a half word */
-+	case BPF_H:
-+		emit(ctx, lhu, lo(dst), off, src);
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		break;
-+	/* Load a word */
-+	case BPF_W:
-+		emit(ctx, lw, lo(dst), off, src);
-+		emit(ctx, move, hi(dst), MIPS_R_ZERO);
-+		break;
-+	/* Load a double word */
-+	case BPF_DW:
-+		if (dst[1] == src) {
-+			emit(ctx, lw, dst[0], off + 4, src);
-+			emit(ctx, lw, dst[1], off, src);
-+		} else {
-+			emit(ctx, lw, dst[1], off, src);
-+			emit(ctx, lw, dst[0], off + 4, src);
-+		}
-+		emit_load_delay(ctx);
-+		break;
-+	}
-+	clobber_reg64(ctx, dst);
-+}
-+
-+/* Store operation: *(size *)(dst + off) = src */
-+static void emit_stx(struct jit_context *ctx,
-+		     const u8 dst, const u8 src[], s16 off, u8 size)
-+{
-+	switch (size) {
-+	/* Store a byte */
-+	case BPF_B:
-+		emit(ctx, sb, lo(src), off, dst);
-+		break;
-+	/* Store a half word */
-+	case BPF_H:
-+		emit(ctx, sh, lo(src), off, dst);
-+		break;
-+	/* Store a word */
-+	case BPF_W:
-+		emit(ctx, sw, lo(src), off, dst);
-+		break;
-+	/* Store a double word */
-+	case BPF_DW:
-+		emit(ctx, sw, src[1], off, dst);
-+		emit(ctx, sw, src[0], off + 4, dst);
-+		break;
-+	}
-+}
-+
-+/* Atomic read-modify-write (32-bit, non-ll/sc fallback) */
-+static void emit_atomic_r32(struct jit_context *ctx,
-+			    u8 dst, u8 src, s16 off, u8 code)
-+{
-+	u32 exclude = 0;
-+	u32 addr = 0;
-+
-+	/* Push caller-saved registers on stack */
-+	push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS,
-+		  0, JIT_RESERVED_STACK);
-+	/*
-+	 * Argument 1: dst+off if xchg, otherwise src, passed in register a0
-+	 * Argument 2: src if xchg, othersize dst+off, passed in register a1
-+	 */
-+	emit(ctx, move, MIPS_R_T9, dst);
-+	emit(ctx, move, MIPS_R_A0, src);
-+	emit(ctx, addiu, MIPS_R_A1, MIPS_R_T9, off);
-+
-+	/* Emit function call */
-+	switch (code) {
-+	case BPF_ADD:
-+		addr = (u32)&atomic_add;
-+		break;
-+	case BPF_SUB:
-+		addr = (u32)&atomic_sub;
-+		break;
-+	case BPF_OR:
-+		addr = (u32)&atomic_or;
-+		break;
-+	case BPF_AND:
-+		addr = (u32)&atomic_and;
-+		break;
-+	case BPF_XOR:
-+		addr = (u32)&atomic_xor;
-+		break;
-+	}
-+	emit_mov_i(ctx, MIPS_R_T9, addr);
-+	emit(ctx, jalr, MIPS_R_RA, MIPS_R_T9);
-+	emit(ctx, nop); /* Delay slot */
-+
-+	/* Restore caller-saved registers, except any fetched value */
-+	pop_regs(ctx, ctx->clobbered & JIT_CALLER_REGS,
-+		 exclude, JIT_RESERVED_STACK);
-+	emit_load_delay(ctx);
-+	clobber_reg(ctx, MIPS_R_RA);
-+}
-+
-+/* Atomic read-modify-write (64-bit) */
-+static void emit_atomic_r64(struct jit_context *ctx,
-+			    u8 dst, const u8 src[], s16 off, u8 code)
-+{
-+	const u8 *r1 = bpf2mips32[BPF_REG_1]; /* Mapped to a0-a1 */
-+	u32 exclude = 0;
-+	u32 addr = 0;
-+
-+	/* Push caller-saved registers on stack */
-+	push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS,
-+		  0, JIT_RESERVED_STACK);
-+	/*
-+	 * Argument 1: 64-bit src, passed in registers a0-a1
-+	 * Argument 2: 32-bit dst+off, passed in register a2
-+	 */
-+	emit(ctx, move, MIPS_R_T9, dst);
-+	emit(ctx, move, r1[0], src[0]);
-+	emit(ctx, move, r1[1], src[1]);
-+	emit(ctx, addiu, MIPS_R_A2, MIPS_R_T9, off);
-+
-+	/* Emit function call */
-+	switch (code) {
-+	case BPF_ADD:
-+		addr = (u32)&atomic64_add;
-+		break;
-+	case BPF_SUB:
-+		addr = (u32)&atomic64_sub;
-+		break;
-+	case BPF_OR:
-+		addr = (u32)&atomic64_or;
-+		break;
-+	case BPF_AND:
-+		addr = (u32)&atomic64_and;
-+		break;
-+	case BPF_XOR:
-+		addr = (u32)&atomic64_xor;
-+		break;
-+	}
-+	emit_mov_i(ctx, MIPS_R_T9, addr);
-+	emit(ctx, jalr, MIPS_R_RA, MIPS_R_T9);
-+	emit(ctx, nop); /* Delay slot */
-+
-+	/* Restore caller-saved registers, except any fetched value */
-+	pop_regs(ctx, ctx->clobbered & JIT_CALLER_REGS,
-+		 exclude, JIT_RESERVED_STACK);
-+	emit_load_delay(ctx);
-+	clobber_reg(ctx, MIPS_R_RA);
-+}
-+
-+/*
-+ * Conditional movz or an emulated equivalent.
-+ * Note that the rs register may be modified.
-+ */
-+static void emit_movz_r(struct jit_context *ctx, u8 rd, u8 rs, u8 rt)
-+{
-+	if (cpu_has_mips_2) {
-+		emit(ctx, movz, rd, rs, rt);           /* rd = rt ? rd : rs  */
-+	} else if (cpu_has_mips32r6) {
-+		if (rs != MIPS_R_ZERO)
-+			emit(ctx, seleqz, rs, rs, rt); /* rs = 0 if rt == 0  */
-+		emit(ctx, selnez, rd, rd, rt);         /* rd = 0 if rt != 0  */
-+		if (rs != MIPS_R_ZERO)
-+			emit(ctx, or, rd, rd, rs);     /* rd = rd | rs       */
-+	} else {
-+		emit(ctx, bnez, rt, 8);                /* PC += 8 if rd != 0 */
-+		emit(ctx, nop);                        /* +0: delay slot     */
-+		emit(ctx, or, rd, rs, MIPS_R_ZERO);    /* +4: rd = rs        */
-+	}
-+	clobber_reg(ctx, rd);
-+	clobber_reg(ctx, rs);
-+}
-+
-+/*
-+ * Conditional movn or an emulated equivalent.
-+ * Note that the rs register may be modified.
-+ */
-+static void emit_movn_r(struct jit_context *ctx, u8 rd, u8 rs, u8 rt)
-+{
-+	if (cpu_has_mips_2) {
-+		emit(ctx, movn, rd, rs, rt);           /* rd = rt ? rs : rd  */
-+	} else if (cpu_has_mips32r6) {
-+		if (rs != MIPS_R_ZERO)
-+			emit(ctx, selnez, rs, rs, rt); /* rs = 0 if rt == 0  */
-+		emit(ctx, seleqz, rd, rd, rt);         /* rd = 0 if rt != 0  */
-+		if (rs != MIPS_R_ZERO)
-+			emit(ctx, or, rd, rd, rs);     /* rd = rd | rs       */
-+	} else {
-+		emit(ctx, beqz, rt, 8);                /* PC += 8 if rd == 0 */
-+		emit(ctx, nop);                        /* +0: delay slot     */
-+		emit(ctx, or, rd, rs, MIPS_R_ZERO);    /* +4: rd = rs        */
-+	}
-+	clobber_reg(ctx, rd);
-+	clobber_reg(ctx, rs);
-+}
-+
-+/* Emulation of 64-bit sltiu rd, rs, imm, where imm may be S32_MAX + 1 */
-+static void emit_sltiu_r64(struct jit_context *ctx, u8 rd,
-+			   const u8 rs[], s64 imm)
-+{
-+	u8 tmp = MIPS_R_T9;
-+
-+	if (imm < 0) {
-+		emit_mov_i(ctx, rd, imm);                 /* rd = imm        */
-+		emit(ctx, sltu, rd, lo(rs), rd);          /* rd = rsl < rd   */
-+		emit(ctx, sltiu, tmp, hi(rs), -1);        /* tmp = rsh < ~0U */
-+		emit(ctx, or, rd, rd, tmp);               /* rd = rd | tmp   */
-+	} else { /* imm >= 0 */
-+		if (imm > 0x7fff) {
-+			emit_mov_i(ctx, rd, (s32)imm);     /* rd = imm       */
-+			emit(ctx, sltu, rd, lo(rs), rd);   /* rd = rsl < rd  */
-+		} else {
-+			emit(ctx, sltiu, rd, lo(rs), imm); /* rd = rsl < imm */
-+		}
-+		emit_movn_r(ctx, rd, MIPS_R_ZERO, hi(rs)); /* rd = 0 if rsh  */
-+	}
-+}
-+
-+/* Emulation of 64-bit sltu rd, rs, rt */
-+static void emit_sltu_r64(struct jit_context *ctx, u8 rd,
-+			  const u8 rs[], const u8 rt[])
-+{
-+	u8 tmp = MIPS_R_T9;
-+
-+	emit(ctx, sltu, rd, lo(rs), lo(rt));           /* rd = rsl < rtl     */
-+	emit(ctx, subu, tmp, hi(rs), hi(rt));          /* tmp = rsh - rth    */
-+	emit_movn_r(ctx, rd, MIPS_R_ZERO, tmp);        /* rd = 0 if tmp != 0 */
-+	emit(ctx, sltu, tmp, hi(rs), hi(rt));          /* tmp = rsh < rth    */
-+	emit(ctx, or, rd, rd, tmp);                    /* rd = rd | tmp      */
-+}
-+
-+/* Emulation of 64-bit slti rd, rs, imm, where imm may be S32_MAX + 1 */
-+static void emit_slti_r64(struct jit_context *ctx, u8 rd,
-+			  const u8 rs[], s64 imm)
-+{
-+	u8 t1 = MIPS_R_T8;
-+	u8 t2 = MIPS_R_T9;
-+	u8 cmp;
-+
-+	/*
-+	 * if ((rs < 0) ^ (imm < 0)) t1 = imm >u rsl
-+	 * else                      t1 = rsl <u imm
-+	 */
-+	emit_mov_i(ctx, rd, (s32)imm);
-+	emit(ctx, sltu, t1, lo(rs), rd);               /* t1 = rsl <u imm   */
-+	emit(ctx, sltu, t2, rd, lo(rs));               /* t2 = imm <u rsl   */
-+	emit(ctx, srl, rd, hi(rs), 31);                /* rd = rsh >> 31    */
-+	if (imm < 0)
-+		emit_movz_r(ctx, t1, t2, rd);          /* t1 = rd ? t1 : t2 */
-+	else
-+		emit_movn_r(ctx, t1, t2, rd);          /* t1 = rd ? t2 : t1 */
-+	/*
-+	 * if ((imm < 0 && rsh != 0xffffffff) ||
-+	 *     (imm >= 0 && rsh != 0))
-+	 *      t1 = 0
-+	 */
-+	if (imm < 0) {
-+		emit(ctx, addiu, rd, hi(rs), 1);       /* rd = rsh + 1 */
-+		cmp = rd;
-+	} else { /* imm >= 0 */
-+		cmp = hi(rs);
-+	}
-+	emit_movn_r(ctx, t1, MIPS_R_ZERO, cmp);        /* t1 = 0 if cmp != 0 */
-+
-+	/*
-+	 * if (imm < 0) rd = rsh < -1
-+	 * else         rd = rsh != 0
-+	 * rd = rd | t1
-+	 */
-+	emit(ctx, slti, rd, hi(rs), imm < 0 ? -1 : 0); /* rd = rsh < hi(imm) */
-+	emit(ctx, or, rd, rd, t1);                     /* rd = rd | t1       */
-+}
-+
-+/* Emulation of 64-bit(slt rd, rs, rt) */
-+static void emit_slt_r64(struct jit_context *ctx, u8 rd,
-+			 const u8 rs[], const u8 rt[])
-+{
-+	u8 t1 = MIPS_R_T7;
-+	u8 t2 = MIPS_R_T8;
-+	u8 t3 = MIPS_R_T9;
-+
-+	/*
-+	 * if ((rs < 0) ^ (rt < 0)) t1 = rtl <u rsl
-+	 * else                     t1 = rsl <u rtl
-+	 * if (rsh == rth)          t1 = 0
-+	 */
-+	emit(ctx, sltu, t1, lo(rs), lo(rt));           /* t1 = rsl <u rtl   */
-+	emit(ctx, sltu, t2, lo(rt), lo(rs));           /* t2 = rtl <u rsl   */
-+	emit(ctx, xor, t3, hi(rs), hi(rt));            /* t3 = rlh ^ rth    */
-+	emit(ctx, srl, rd, t3, 31);                    /* rd = t3 >> 31     */
-+	emit_movn_r(ctx, t1, t2, rd);                  /* t1 = rd ? t2 : t1 */
-+	emit_movn_r(ctx, t1, MIPS_R_ZERO, t3);         /* t1 = 0 if t3 != 0 */
-+
-+	/* rd = (rsh < rth) | t1 */
-+	emit(ctx, slt, rd, hi(rs), hi(rt));            /* rd = rsh <s rth   */
-+	emit(ctx, or, rd, rd, t1);                     /* rd = rd | t1      */
-+}
-+
-+/* Jump immediate (64-bit) */
-+static void emit_jmp_i64(struct jit_context *ctx,
-+			 const u8 dst[], s32 imm, s32 off, u8 op)
-+{
-+	u8 tmp = MIPS_R_T6;
-+
-+	switch (op) {
-+	/* No-op, used internally for branch optimization */
-+	case JIT_JNOP:
-+		break;
-+	/* PC += off if dst == imm */
-+	/* PC += off if dst != imm */
-+	case BPF_JEQ:
-+	case BPF_JNE:
-+		if (imm >= -0x7fff && imm <= 0x8000) {
-+			emit(ctx, addiu, tmp, lo(dst), -imm);
-+		} else if ((u32)imm <= 0xffff) {
-+			emit(ctx, xori, tmp, lo(dst), imm);
-+		} else {       /* Register fallback */
-+			emit_mov_i(ctx, tmp, imm);
-+			emit(ctx, xor, tmp, lo(dst), tmp);
-+		}
-+		if (imm < 0) { /* Compare sign extension */
-+			emit(ctx, addu, MIPS_R_T9, hi(dst), 1);
-+			emit(ctx, or, tmp, tmp, MIPS_R_T9);
-+		} else {       /* Compare zero extension */
-+			emit(ctx, or, tmp, tmp, hi(dst));
-+		}
-+		if (op == BPF_JEQ)
-+			emit(ctx, beqz, tmp, off);
-+		else   /* BPF_JNE */
-+			emit(ctx, bnez, tmp, off);
-+		break;
-+	/* PC += off if dst & imm */
-+	/* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */
-+	case BPF_JSET:
-+	case JIT_JNSET:
-+		if ((u32)imm <= 0xffff) {
-+			emit(ctx, andi, tmp, lo(dst), imm);
-+		} else {     /* Register fallback */
-+			emit_mov_i(ctx, tmp, imm);
-+			emit(ctx, and, tmp, lo(dst), tmp);
-+		}
-+		if (imm < 0) /* Sign-extension pulls in high word */
-+			emit(ctx, or, tmp, tmp, hi(dst));
-+		if (op == BPF_JSET)
-+			emit(ctx, bnez, tmp, off);
-+		else   /* JIT_JNSET */
-+			emit(ctx, beqz, tmp, off);
-+		break;
-+	/* PC += off if dst > imm */
-+	case BPF_JGT:
-+		emit_sltiu_r64(ctx, tmp, dst, (s64)imm + 1);
-+		emit(ctx, beqz, tmp, off);
-+		break;
-+	/* PC += off if dst >= imm */
-+	case BPF_JGE:
-+		emit_sltiu_r64(ctx, tmp, dst, imm);
-+		emit(ctx, beqz, tmp, off);
-+		break;
-+	/* PC += off if dst < imm */
-+	case BPF_JLT:
-+		emit_sltiu_r64(ctx, tmp, dst, imm);
-+		emit(ctx, bnez, tmp, off);
-+		break;
-+	/* PC += off if dst <= imm */
-+	case BPF_JLE:
-+		emit_sltiu_r64(ctx, tmp, dst, (s64)imm + 1);
-+		emit(ctx, bnez, tmp, off);
-+		break;
-+	/* PC += off if dst > imm (signed) */
-+	case BPF_JSGT:
-+		emit_slti_r64(ctx, tmp, dst, (s64)imm + 1);
-+		emit(ctx, beqz, tmp, off);
-+		break;
-+	/* PC += off if dst >= imm (signed) */
-+	case BPF_JSGE:
-+		emit_slti_r64(ctx, tmp, dst, imm);
-+		emit(ctx, beqz, tmp, off);
-+		break;
-+	/* PC += off if dst < imm (signed) */
-+	case BPF_JSLT:
-+		emit_slti_r64(ctx, tmp, dst, imm);
-+		emit(ctx, bnez, tmp, off);
-+		break;
-+	/* PC += off if dst <= imm (signed) */
-+	case BPF_JSLE:
-+		emit_slti_r64(ctx, tmp, dst, (s64)imm + 1);
-+		emit(ctx, bnez, tmp, off);
-+		break;
-+	}
-+}
-+
-+/* Jump register (64-bit) */
-+static void emit_jmp_r64(struct jit_context *ctx,
-+			 const u8 dst[], const u8 src[], s32 off, u8 op)
-+{
-+	u8 t1 = MIPS_R_T6;
-+	u8 t2 = MIPS_R_T7;
-+
-+	switch (op) {
-+	/* No-op, used internally for branch optimization */
-+	case JIT_JNOP:
-+		break;
-+	/* PC += off if dst == src */
-+	/* PC += off if dst != src */
-+	case BPF_JEQ:
-+	case BPF_JNE:
-+		emit(ctx, subu, t1, lo(dst), lo(src));
-+		emit(ctx, subu, t2, hi(dst), hi(src));
-+		emit(ctx, or, t1, t1, t2);
-+		if (op == BPF_JEQ)
-+			emit(ctx, beqz, t1, off);
-+		else   /* BPF_JNE */
-+			emit(ctx, bnez, t1, off);
-+		break;
-+	/* PC += off if dst & src */
-+	/* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */
-+	case BPF_JSET:
-+	case JIT_JNSET:
-+		emit(ctx, and, t1, lo(dst), lo(src));
-+		emit(ctx, and, t2, hi(dst), hi(src));
-+		emit(ctx, or, t1, t1, t2);
-+		if (op == BPF_JSET)
-+			emit(ctx, bnez, t1, off);
-+		else   /* JIT_JNSET */
-+			emit(ctx, beqz, t1, off);
-+		break;
-+	/* PC += off if dst > src */
-+	case BPF_JGT:
-+		emit_sltu_r64(ctx, t1, src, dst);
-+		emit(ctx, bnez, t1, off);
-+		break;
-+	/* PC += off if dst >= src */
-+	case BPF_JGE:
-+		emit_sltu_r64(ctx, t1, dst, src);
-+		emit(ctx, beqz, t1, off);
-+		break;
-+	/* PC += off if dst < src */
-+	case BPF_JLT:
-+		emit_sltu_r64(ctx, t1, dst, src);
-+		emit(ctx, bnez, t1, off);
-+		break;
-+	/* PC += off if dst <= src */
-+	case BPF_JLE:
-+		emit_sltu_r64(ctx, t1, src, dst);
-+		emit(ctx, beqz, t1, off);
-+		break;
-+	/* PC += off if dst > src (signed) */
-+	case BPF_JSGT:
-+		emit_slt_r64(ctx, t1, src, dst);
-+		emit(ctx, bnez, t1, off);
-+		break;
-+	/* PC += off if dst >= src (signed) */
-+	case BPF_JSGE:
-+		emit_slt_r64(ctx, t1, dst, src);
-+		emit(ctx, beqz, t1, off);
-+		break;
-+	/* PC += off if dst < src (signed) */
-+	case BPF_JSLT:
-+		emit_slt_r64(ctx, t1, dst, src);
-+		emit(ctx, bnez, t1, off);
-+		break;
-+	/* PC += off if dst <= src (signed) */
-+	case BPF_JSLE:
-+		emit_slt_r64(ctx, t1, src, dst);
-+		emit(ctx, beqz, t1, off);
-+		break;
-+	}
-+}
-+
-+/* Function call */
-+static int emit_call(struct jit_context *ctx, const struct bpf_insn *insn)
-+{
-+	bool fixed;
-+	u64 addr;
-+
-+	/* Decode the call address */
-+	if (bpf_jit_get_func_addr(ctx->program, insn, false,
-+				  &addr, &fixed) < 0)
-+		return -1;
-+	if (!fixed)
-+		return -1;
-+
-+	/* Push stack arguments */
-+	push_regs(ctx, JIT_STACK_REGS, 0, JIT_RESERVED_STACK);
-+
-+	/* Emit function call */
-+	emit_mov_i(ctx, MIPS_R_T9, addr);
-+	emit(ctx, jalr, MIPS_R_RA, MIPS_R_T9);
-+	emit(ctx, nop); /* Delay slot */
-+
-+	clobber_reg(ctx, MIPS_R_RA);
-+	clobber_reg(ctx, MIPS_R_V0);
-+	clobber_reg(ctx, MIPS_R_V1);
-+	return 0;
-+}
-+
-+/* Function tail call */
-+static int emit_tail_call(struct jit_context *ctx)
-+{
-+	u8 ary = lo(bpf2mips32[BPF_REG_2]);
-+	u8 ind = lo(bpf2mips32[BPF_REG_3]);
-+	u8 t1 = MIPS_R_T8;
-+	u8 t2 = MIPS_R_T9;
-+	int off;
-+
-+	/*
-+	 * Tail call:
-+	 * eBPF R1   - function argument (context ptr), passed in a0-a1
-+	 * eBPF R2   - ptr to object with array of function entry points
-+	 * eBPF R3   - array index of function to be called
-+	 * stack[sz] - remaining tail call count, initialized in prologue
-+	 */
-+
-+	/* if (ind >= ary->map.max_entries) goto out */
-+	off = offsetof(struct bpf_array, map.max_entries);
-+	if (off > 0x7fff)
-+		return -1;
-+	emit(ctx, lw, t1, off, ary);             /* t1 = ary->map.max_entries*/
-+	emit_load_delay(ctx);                    /* Load delay slot          */
-+	emit(ctx, sltu, t1, ind, t1);            /* t1 = ind < t1            */
-+	emit(ctx, beqz, t1, get_offset(ctx, 1)); /* PC += off(1) if t1 == 0  */
-+						 /* (next insn delay slot)   */
-+	/* if (TCC-- <= 0) goto out */
-+	emit(ctx, lw, t2, ctx->stack_size, MIPS_R_SP);  /* t2 = *(SP + size) */
-+	emit_load_delay(ctx);                     /* Load delay slot         */
-+	emit(ctx, blez, t2, get_offset(ctx, 1));  /* PC += off(1) if t2 < 0  */
-+	emit(ctx, addiu, t2, t2, -1);             /* t2-- (delay slot)       */
-+	emit(ctx, sw, t2, ctx->stack_size, MIPS_R_SP);  /* *(SP + size) = t2 */
-+
-+	/* prog = ary->ptrs[ind] */
-+	off = offsetof(struct bpf_array, ptrs);
-+	if (off > 0x7fff)
-+		return -1;
-+	emit(ctx, sll, t1, ind, 2);               /* t1 = ind << 2           */
-+	emit(ctx, addu, t1, t1, ary);             /* t1 += ary               */
-+	emit(ctx, lw, t2, off, t1);               /* t2 = *(t1 + off)        */
-+	emit_load_delay(ctx);                     /* Load delay slot         */
-+
-+	/* if (prog == 0) goto out */
-+	emit(ctx, beqz, t2, get_offset(ctx, 1));  /* PC += off(1) if t2 == 0 */
-+	emit(ctx, nop);                           /* Delay slot              */
-+
-+	/* func = prog->bpf_func + 8 (prologue skip offset) */
-+	off = offsetof(struct bpf_prog, bpf_func);
-+	if (off > 0x7fff)
-+		return -1;
-+	emit(ctx, lw, t1, off, t2);                /* t1 = *(t2 + off)       */
-+	emit_load_delay(ctx);                      /* Load delay slot        */
-+	emit(ctx, addiu, t1, t1, JIT_TCALL_SKIP);  /* t1 += skip (8 or 12)   */
-+
-+	/* goto func */
-+	build_epilogue(ctx, t1);
-+	return 0;
-+}
-+
-+/*
-+ * Stack frame layout for a JITed program (stack grows down).
-+ *
-+ * Higher address  : Caller's stack frame       :
-+ *                 :----------------------------:
-+ *                 : 64-bit eBPF args r3-r5     :
-+ *                 :----------------------------:
-+ *                 : Reserved / tail call count :
-+ *                 +============================+  <--- MIPS sp before call
-+ *                 | Callee-saved registers,    |
-+ *                 | including RA and FP        |
-+ *                 +----------------------------+  <--- eBPF FP (MIPS zero,fp)
-+ *                 | Local eBPF variables       |
-+ *                 | allocated by program       |
-+ *                 +----------------------------+
-+ *                 | Reserved for caller-saved  |
-+ *                 | registers                  |
-+ *                 +----------------------------+
-+ *                 | Reserved for 64-bit eBPF   |
-+ *                 | args r3-r5 & args passed   |
-+ *                 | on stack in kernel calls   |
-+ * Lower address   +============================+  <--- MIPS sp
-+ */
-+
-+/* Build program prologue to set up the stack and registers */
-+void build_prologue(struct jit_context *ctx)
-+{
-+	const u8 *r1 = bpf2mips32[BPF_REG_1];
-+	const u8 *fp = bpf2mips32[BPF_REG_FP];
-+	int stack, saved, locals, reserved;
-+
-+	/*
-+	 * The first two instructions initialize TCC in the reserved (for us)
-+	 * 16-byte area in the parent's stack frame. On a tail call, the
-+	 * calling function jumps into the prologue after these instructions.
-+	 */
-+	emit(ctx, ori, MIPS_R_T9, MIPS_R_ZERO,
-+	     min(MAX_TAIL_CALL_CNT + 1, 0xffff));
-+	emit(ctx, sw, MIPS_R_T9, 0, MIPS_R_SP);
-+
-+	/*
-+	 * Register eBPF R1 contains the 32-bit context pointer argument.
-+	 * A 32-bit argument is always passed in MIPS register a0, regardless
-+	 * of CPU endianness. Initialize R1 accordingly and zero-extend.
-+	 */
-+#ifdef __BIG_ENDIAN
-+	emit(ctx, move, lo(r1), MIPS_R_A0);
-+#endif
-+
-+	/* === Entry-point for tail calls === */
-+
-+	/* Zero-extend the 32-bit argument */
-+	emit(ctx, move, hi(r1), MIPS_R_ZERO);
-+
-+	/* If the eBPF frame pointer was accessed it must be saved */
-+	if (ctx->accessed & BIT(BPF_REG_FP))
-+		clobber_reg64(ctx, fp);
-+
-+	/* Compute the stack space needed for callee-saved registers */
-+	saved = hweight32(ctx->clobbered & JIT_CALLEE_REGS) * sizeof(u32);
-+	saved = ALIGN(saved, MIPS_STACK_ALIGNMENT);
-+
-+	/* Stack space used by eBPF program local data */
-+	locals = ALIGN(ctx->program->aux->stack_depth, MIPS_STACK_ALIGNMENT);
-+
-+	/*
-+	 * If we are emitting function calls, reserve extra stack space for
-+	 * caller-saved registers and function arguments passed on the stack.
-+	 * The required space is computed automatically during resource
-+	 * usage discovery (pass 1).
-+	 */
-+	reserved = ctx->stack_used;
-+
-+	/* Allocate the stack frame */
-+	stack = ALIGN(saved + locals + reserved, MIPS_STACK_ALIGNMENT);
-+	emit(ctx, addiu, MIPS_R_SP, MIPS_R_SP, -stack);
-+
-+	/* Store callee-saved registers on stack */
-+	push_regs(ctx, ctx->clobbered & JIT_CALLEE_REGS, 0, stack - saved);
-+
-+	/* Initialize the eBPF frame pointer if accessed */
-+	if (ctx->accessed & BIT(BPF_REG_FP))
-+		emit(ctx, addiu, lo(fp), MIPS_R_SP, stack - saved);
-+
-+	ctx->saved_size = saved;
-+	ctx->stack_size = stack;
-+}
-+
-+/* Build the program epilogue to restore the stack and registers */
-+void build_epilogue(struct jit_context *ctx, int dest_reg)
-+{
-+	/* Restore callee-saved registers from stack */
-+	pop_regs(ctx, ctx->clobbered & JIT_CALLEE_REGS, 0,
-+		 ctx->stack_size - ctx->saved_size);
-+	/*
-+	 * A 32-bit return value is always passed in MIPS register v0,
-+	 * but on big-endian targets the low part of R0 is mapped to v1.
-+	 */
-+#ifdef __BIG_ENDIAN
-+	emit(ctx, move, MIPS_R_V0, MIPS_R_V1);
-+#endif
-+
-+	/* Jump to the return address and adjust the stack pointer */
-+	emit(ctx, jr, dest_reg);
-+	emit(ctx, addiu, MIPS_R_SP, MIPS_R_SP, ctx->stack_size);
-+}
-+
-+/* Build one eBPF instruction */
-+int build_insn(const struct bpf_insn *insn, struct jit_context *ctx)
-+{
-+	const u8 *dst = bpf2mips32[insn->dst_reg];
-+	const u8 *src = bpf2mips32[insn->src_reg];
-+	const u8 *tmp = bpf2mips32[JIT_REG_TMP];
-+	u8 code = insn->code;
-+	s16 off = insn->off;
-+	s32 imm = insn->imm;
-+	s32 val, rel;
-+	u8 alu, jmp;
-+
-+	switch (code) {
-+	/* ALU operations */
-+	/* dst = imm */
-+	case BPF_ALU | BPF_MOV | BPF_K:
-+		emit_mov_i(ctx, lo(dst), imm);
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = src */
-+	case BPF_ALU | BPF_MOV | BPF_X:
-+		if (imm == 1) {
-+			/* Special mov32 for zext */
-+			emit_mov_i(ctx, hi(dst), 0);
-+		} else {
-+			emit_mov_r(ctx, lo(dst), lo(src));
-+			emit_zext_ver(ctx, dst);
-+		}
-+		break;
-+	/* dst = -dst */
-+	case BPF_ALU | BPF_NEG:
-+		emit_alu_i(ctx, lo(dst), 0, BPF_NEG);
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = dst & imm */
-+	/* dst = dst | imm */
-+	/* dst = dst ^ imm */
-+	/* dst = dst << imm */
-+	/* dst = dst >> imm */
-+	/* dst = dst >> imm (arithmetic) */
-+	/* dst = dst + imm */
-+	/* dst = dst - imm */
-+	/* dst = dst * imm */
-+	/* dst = dst / imm */
-+	/* dst = dst % imm */
-+	case BPF_ALU | BPF_OR | BPF_K:
-+	case BPF_ALU | BPF_AND | BPF_K:
-+	case BPF_ALU | BPF_XOR | BPF_K:
-+	case BPF_ALU | BPF_LSH | BPF_K:
-+	case BPF_ALU | BPF_RSH | BPF_K:
-+	case BPF_ALU | BPF_ARSH | BPF_K:
-+	case BPF_ALU | BPF_ADD | BPF_K:
-+	case BPF_ALU | BPF_SUB | BPF_K:
-+	case BPF_ALU | BPF_MUL | BPF_K:
-+	case BPF_ALU | BPF_DIV | BPF_K:
-+	case BPF_ALU | BPF_MOD | BPF_K:
-+		if (!valid_alu_i(BPF_OP(code), imm)) {
-+			emit_mov_i(ctx, MIPS_R_T6, imm);
-+			emit_alu_r(ctx, lo(dst), MIPS_R_T6, BPF_OP(code));
-+		} else if (rewrite_alu_i(BPF_OP(code), imm, &alu, &val)) {
-+			emit_alu_i(ctx, lo(dst), val, alu);
-+		}
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = dst & src */
-+	/* dst = dst | src */
-+	/* dst = dst ^ src */
-+	/* dst = dst << src */
-+	/* dst = dst >> src */
-+	/* dst = dst >> src (arithmetic) */
-+	/* dst = dst + src */
-+	/* dst = dst - src */
-+	/* dst = dst * src */
-+	/* dst = dst / src */
-+	/* dst = dst % src */
-+	case BPF_ALU | BPF_AND | BPF_X:
-+	case BPF_ALU | BPF_OR | BPF_X:
-+	case BPF_ALU | BPF_XOR | BPF_X:
-+	case BPF_ALU | BPF_LSH | BPF_X:
-+	case BPF_ALU | BPF_RSH | BPF_X:
-+	case BPF_ALU | BPF_ARSH | BPF_X:
-+	case BPF_ALU | BPF_ADD | BPF_X:
-+	case BPF_ALU | BPF_SUB | BPF_X:
-+	case BPF_ALU | BPF_MUL | BPF_X:
-+	case BPF_ALU | BPF_DIV | BPF_X:
-+	case BPF_ALU | BPF_MOD | BPF_X:
-+		emit_alu_r(ctx, lo(dst), lo(src), BPF_OP(code));
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = imm (64-bit) */
-+	case BPF_ALU64 | BPF_MOV | BPF_K:
-+		emit_mov_se_i64(ctx, dst, imm);
-+		break;
-+	/* dst = src (64-bit) */
-+	case BPF_ALU64 | BPF_MOV | BPF_X:
-+		emit_mov_r(ctx, lo(dst), lo(src));
-+		emit_mov_r(ctx, hi(dst), hi(src));
-+		break;
-+	/* dst = -dst (64-bit) */
-+	case BPF_ALU64 | BPF_NEG:
-+		emit_neg_i64(ctx, dst);
-+		break;
-+	/* dst = dst & imm (64-bit) */
-+	case BPF_ALU64 | BPF_AND | BPF_K:
-+		emit_alu_i64(ctx, dst, imm, BPF_OP(code));
-+		break;
-+	/* dst = dst | imm (64-bit) */
-+	/* dst = dst ^ imm (64-bit) */
-+	/* dst = dst + imm (64-bit) */
-+	/* dst = dst - imm (64-bit) */
-+	case BPF_ALU64 | BPF_OR | BPF_K:
-+	case BPF_ALU64 | BPF_XOR | BPF_K:
-+	case BPF_ALU64 | BPF_ADD | BPF_K:
-+	case BPF_ALU64 | BPF_SUB | BPF_K:
-+		if (imm)
-+			emit_alu_i64(ctx, dst, imm, BPF_OP(code));
-+		break;
-+	/* dst = dst << imm (64-bit) */
-+	/* dst = dst >> imm (64-bit) */
-+	/* dst = dst >> imm (64-bit, arithmetic) */
-+	case BPF_ALU64 | BPF_LSH | BPF_K:
-+	case BPF_ALU64 | BPF_RSH | BPF_K:
-+	case BPF_ALU64 | BPF_ARSH | BPF_K:
-+		if (imm)
-+			emit_shift_i64(ctx, dst, imm, BPF_OP(code));
-+		break;
-+	/* dst = dst * imm (64-bit) */
-+	case BPF_ALU64 | BPF_MUL | BPF_K:
-+		emit_mul_i64(ctx, dst, imm);
-+		break;
-+	/* dst = dst / imm (64-bit) */
-+	/* dst = dst % imm (64-bit) */
-+	case BPF_ALU64 | BPF_DIV | BPF_K:
-+	case BPF_ALU64 | BPF_MOD | BPF_K:
-+		/*
-+		 * Sign-extend the immediate value into a temporary register,
-+		 * and then do the operation on this register.
-+		 */
-+		emit_mov_se_i64(ctx, tmp, imm);
-+		emit_divmod_r64(ctx, dst, tmp, BPF_OP(code));
-+		break;
-+	/* dst = dst & src (64-bit) */
-+	/* dst = dst | src (64-bit) */
-+	/* dst = dst ^ src (64-bit) */
-+	/* dst = dst + src (64-bit) */
-+	/* dst = dst - src (64-bit) */
-+	case BPF_ALU64 | BPF_AND | BPF_X:
-+	case BPF_ALU64 | BPF_OR | BPF_X:
-+	case BPF_ALU64 | BPF_XOR | BPF_X:
-+	case BPF_ALU64 | BPF_ADD | BPF_X:
-+	case BPF_ALU64 | BPF_SUB | BPF_X:
-+		emit_alu_r64(ctx, dst, src, BPF_OP(code));
-+		break;
-+	/* dst = dst << src (64-bit) */
-+	/* dst = dst >> src (64-bit) */
-+	/* dst = dst >> src (64-bit, arithmetic) */
-+	case BPF_ALU64 | BPF_LSH | BPF_X:
-+	case BPF_ALU64 | BPF_RSH | BPF_X:
-+	case BPF_ALU64 | BPF_ARSH | BPF_X:
-+		emit_shift_r64(ctx, dst, lo(src), BPF_OP(code));
-+		break;
-+	/* dst = dst * src (64-bit) */
-+	case BPF_ALU64 | BPF_MUL | BPF_X:
-+		emit_mul_r64(ctx, dst, src);
-+		break;
-+	/* dst = dst / src (64-bit) */
-+	/* dst = dst % src (64-bit) */
-+	case BPF_ALU64 | BPF_DIV | BPF_X:
-+	case BPF_ALU64 | BPF_MOD | BPF_X:
-+		emit_divmod_r64(ctx, dst, src, BPF_OP(code));
-+		break;
-+	/* dst = htole(dst) */
-+	/* dst = htobe(dst) */
-+	case BPF_ALU | BPF_END | BPF_FROM_LE:
-+	case BPF_ALU | BPF_END | BPF_FROM_BE:
-+		if (BPF_SRC(code) ==
-+#ifdef __BIG_ENDIAN
-+		    BPF_FROM_LE
-+#else
-+		    BPF_FROM_BE
-+#endif
-+		    )
-+			emit_bswap_r64(ctx, dst, imm);
-+		else
-+			emit_trunc_r64(ctx, dst, imm);
-+		break;
-+	/* dst = imm64 */
-+	case BPF_LD | BPF_IMM | BPF_DW:
-+		emit_mov_i(ctx, lo(dst), imm);
-+		emit_mov_i(ctx, hi(dst), insn[1].imm);
-+		return 1;
-+	/* LDX: dst = *(size *)(src + off) */
-+	case BPF_LDX | BPF_MEM | BPF_W:
-+	case BPF_LDX | BPF_MEM | BPF_H:
-+	case BPF_LDX | BPF_MEM | BPF_B:
-+	case BPF_LDX | BPF_MEM | BPF_DW:
-+		emit_ldx(ctx, dst, lo(src), off, BPF_SIZE(code));
-+		break;
-+	/* ST: *(size *)(dst + off) = imm */
-+	case BPF_ST | BPF_MEM | BPF_W:
-+	case BPF_ST | BPF_MEM | BPF_H:
-+	case BPF_ST | BPF_MEM | BPF_B:
-+	case BPF_ST | BPF_MEM | BPF_DW:
-+		switch (BPF_SIZE(code)) {
-+		case BPF_DW:
-+			/* Sign-extend immediate value into temporary reg */
-+			emit_mov_se_i64(ctx, tmp, imm);
-+			break;
-+		case BPF_W:
-+		case BPF_H:
-+		case BPF_B:
-+			emit_mov_i(ctx, lo(tmp), imm);
-+			break;
-+		}
-+		emit_stx(ctx, lo(dst), tmp, off, BPF_SIZE(code));
-+		break;
-+	/* STX: *(size *)(dst + off) = src */
-+	case BPF_STX | BPF_MEM | BPF_W:
-+	case BPF_STX | BPF_MEM | BPF_H:
-+	case BPF_STX | BPF_MEM | BPF_B:
-+	case BPF_STX | BPF_MEM | BPF_DW:
-+		emit_stx(ctx, lo(dst), src, off, BPF_SIZE(code));
-+		break;
-+	/* Speculation barrier */
-+	case BPF_ST | BPF_NOSPEC:
-+		break;
-+	/* Atomics */
-+	case BPF_STX | BPF_XADD | BPF_W:
-+		switch (imm) {
-+		case BPF_ADD:
-+		case BPF_AND:
-+		case BPF_OR:
-+		case BPF_XOR:
-+			if (cpu_has_llsc)
-+				emit_atomic_r(ctx, lo(dst), lo(src), off, imm);
-+			else /* Non-ll/sc fallback */
-+				emit_atomic_r32(ctx, lo(dst), lo(src),
-+						off, imm);
-+			break;
-+		default:
-+			goto notyet;
-+		}
-+		break;
-+	/* Atomics (64-bit) */
-+	case BPF_STX | BPF_XADD | BPF_DW:
-+		switch (imm) {
-+		case BPF_ADD:
-+		case BPF_AND:
-+		case BPF_OR:
-+		case BPF_XOR:
-+			emit_atomic_r64(ctx, lo(dst), src, off, imm);
-+			break;
-+		default:
-+			goto notyet;
-+		}
-+		break;
-+	/* PC += off if dst == src */
-+	/* PC += off if dst != src */
-+	/* PC += off if dst & src */
-+	/* PC += off if dst > src */
-+	/* PC += off if dst >= src */
-+	/* PC += off if dst < src */
-+	/* PC += off if dst <= src */
-+	/* PC += off if dst > src (signed) */
-+	/* PC += off if dst >= src (signed) */
-+	/* PC += off if dst < src (signed) */
-+	/* PC += off if dst <= src (signed) */
-+	case BPF_JMP32 | BPF_JEQ | BPF_X:
-+	case BPF_JMP32 | BPF_JNE | BPF_X:
-+	case BPF_JMP32 | BPF_JSET | BPF_X:
-+	case BPF_JMP32 | BPF_JGT | BPF_X:
-+	case BPF_JMP32 | BPF_JGE | BPF_X:
-+	case BPF_JMP32 | BPF_JLT | BPF_X:
-+	case BPF_JMP32 | BPF_JLE | BPF_X:
-+	case BPF_JMP32 | BPF_JSGT | BPF_X:
-+	case BPF_JMP32 | BPF_JSGE | BPF_X:
-+	case BPF_JMP32 | BPF_JSLT | BPF_X:
-+	case BPF_JMP32 | BPF_JSLE | BPF_X:
-+		if (off == 0)
-+			break;
-+		setup_jmp_r(ctx, dst == src, BPF_OP(code), off, &jmp, &rel);
-+		emit_jmp_r(ctx, lo(dst), lo(src), rel, jmp);
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off if dst == imm */
-+	/* PC += off if dst != imm */
-+	/* PC += off if dst & imm */
-+	/* PC += off if dst > imm */
-+	/* PC += off if dst >= imm */
-+	/* PC += off if dst < imm */
-+	/* PC += off if dst <= imm */
-+	/* PC += off if dst > imm (signed) */
-+	/* PC += off if dst >= imm (signed) */
-+	/* PC += off if dst < imm (signed) */
-+	/* PC += off if dst <= imm (signed) */
-+	case BPF_JMP32 | BPF_JEQ | BPF_K:
-+	case BPF_JMP32 | BPF_JNE | BPF_K:
-+	case BPF_JMP32 | BPF_JSET | BPF_K:
-+	case BPF_JMP32 | BPF_JGT | BPF_K:
-+	case BPF_JMP32 | BPF_JGE | BPF_K:
-+	case BPF_JMP32 | BPF_JLT | BPF_K:
-+	case BPF_JMP32 | BPF_JLE | BPF_K:
-+	case BPF_JMP32 | BPF_JSGT | BPF_K:
-+	case BPF_JMP32 | BPF_JSGE | BPF_K:
-+	case BPF_JMP32 | BPF_JSLT | BPF_K:
-+	case BPF_JMP32 | BPF_JSLE | BPF_K:
-+		if (off == 0)
-+			break;
-+		setup_jmp_i(ctx, imm, 32, BPF_OP(code), off, &jmp, &rel);
-+		if (valid_jmp_i(jmp, imm)) {
-+			emit_jmp_i(ctx, lo(dst), imm, rel, jmp);
-+		} else {
-+			/* Move large immediate to register */
-+			emit_mov_i(ctx, MIPS_R_T6, imm);
-+			emit_jmp_r(ctx, lo(dst), MIPS_R_T6, rel, jmp);
-+		}
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off if dst == src */
-+	/* PC += off if dst != src */
-+	/* PC += off if dst & src */
-+	/* PC += off if dst > src */
-+	/* PC += off if dst >= src */
-+	/* PC += off if dst < src */
-+	/* PC += off if dst <= src */
-+	/* PC += off if dst > src (signed) */
-+	/* PC += off if dst >= src (signed) */
-+	/* PC += off if dst < src (signed) */
-+	/* PC += off if dst <= src (signed) */
-+	case BPF_JMP | BPF_JEQ | BPF_X:
-+	case BPF_JMP | BPF_JNE | BPF_X:
-+	case BPF_JMP | BPF_JSET | BPF_X:
-+	case BPF_JMP | BPF_JGT | BPF_X:
-+	case BPF_JMP | BPF_JGE | BPF_X:
-+	case BPF_JMP | BPF_JLT | BPF_X:
-+	case BPF_JMP | BPF_JLE | BPF_X:
-+	case BPF_JMP | BPF_JSGT | BPF_X:
-+	case BPF_JMP | BPF_JSGE | BPF_X:
-+	case BPF_JMP | BPF_JSLT | BPF_X:
-+	case BPF_JMP | BPF_JSLE | BPF_X:
-+		if (off == 0)
-+			break;
-+		setup_jmp_r(ctx, dst == src, BPF_OP(code), off, &jmp, &rel);
-+		emit_jmp_r64(ctx, dst, src, rel, jmp);
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off if dst == imm */
-+	/* PC += off if dst != imm */
-+	/* PC += off if dst & imm */
-+	/* PC += off if dst > imm */
-+	/* PC += off if dst >= imm */
-+	/* PC += off if dst < imm */
-+	/* PC += off if dst <= imm */
-+	/* PC += off if dst > imm (signed) */
-+	/* PC += off if dst >= imm (signed) */
-+	/* PC += off if dst < imm (signed) */
-+	/* PC += off if dst <= imm (signed) */
-+	case BPF_JMP | BPF_JEQ | BPF_K:
-+	case BPF_JMP | BPF_JNE | BPF_K:
-+	case BPF_JMP | BPF_JSET | BPF_K:
-+	case BPF_JMP | BPF_JGT | BPF_K:
-+	case BPF_JMP | BPF_JGE | BPF_K:
-+	case BPF_JMP | BPF_JLT | BPF_K:
-+	case BPF_JMP | BPF_JLE | BPF_K:
-+	case BPF_JMP | BPF_JSGT | BPF_K:
-+	case BPF_JMP | BPF_JSGE | BPF_K:
-+	case BPF_JMP | BPF_JSLT | BPF_K:
-+	case BPF_JMP | BPF_JSLE | BPF_K:
-+		if (off == 0)
-+			break;
-+		setup_jmp_i(ctx, imm, 64, BPF_OP(code), off, &jmp, &rel);
-+		emit_jmp_i64(ctx, dst, imm, rel, jmp);
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off */
-+	case BPF_JMP | BPF_JA:
-+		if (off == 0)
-+			break;
-+		if (emit_ja(ctx, off) < 0)
-+			goto toofar;
-+		break;
-+	/* Tail call */
-+	case BPF_JMP | BPF_TAIL_CALL:
-+		if (emit_tail_call(ctx) < 0)
-+			goto invalid;
-+		break;
-+	/* Function call */
-+	case BPF_JMP | BPF_CALL:
-+		if (emit_call(ctx, insn) < 0)
-+			goto invalid;
-+		break;
-+	/* Function return */
-+	case BPF_JMP | BPF_EXIT:
-+		/*
-+		 * Optimization: when last instruction is EXIT
-+		 * simply continue to epilogue.
-+		 */
-+		if (ctx->bpf_index == ctx->program->len - 1)
-+			break;
-+		if (emit_exit(ctx) < 0)
-+			goto toofar;
-+		break;
-+
-+	default:
-+invalid:
-+		pr_err_once("unknown opcode %02x\n", code);
-+		return -EINVAL;
-+notyet:
-+		pr_info_once("*** NOT YET: opcode %02x ***\n", code);
-+		return -EFAULT;
-+toofar:
-+		pr_info_once("*** TOO FAR: jump at %u opcode %02x ***\n",
-+			     ctx->bpf_index, code);
-+		return -E2BIG;
-+	}
-+	return 0;
-+}
diff --git a/target/linux/generic/backport-5.10/050-v5.16-03-mips-bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch b/target/linux/generic/backport-5.10/050-v5.16-03-mips-bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch
deleted file mode 100644
index 38b46c0b765b..000000000000
--- a/target/linux/generic/backport-5.10/050-v5.16-03-mips-bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch
+++ /dev/null
@@ -1,1005 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:05 +0200
-Subject: [PATCH] mips: bpf: Add new eBPF JIT for 64-bit MIPS
-
-This is an implementation on of an eBPF JIT for 64-bit MIPS III-V and
-MIPS64r1-r6. It uses the same framework introduced by the 32-bit JIT.
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
----
- create mode 100644 arch/mips/net/bpf_jit_comp64.c
-
---- /dev/null
-+++ b/arch/mips/net/bpf_jit_comp64.c
-@@ -0,0 +1,991 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Just-In-Time compiler for eBPF bytecode on MIPS.
-+ * Implementation of JIT functions for 64-bit CPUs.
-+ *
-+ * Copyright (c) 2021 Anyfi Networks AB.
-+ * Author: Johan Almbladh <johan.almbladh@gmail.com>
-+ *
-+ * Based on code and ideas from
-+ * Copyright (c) 2017 Cavium, Inc.
-+ * Copyright (c) 2017 Shubham Bansal <illusionist.neo@gmail.com>
-+ * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
-+ */
-+
-+#include <linux/errno.h>
-+#include <linux/filter.h>
-+#include <linux/bpf.h>
-+#include <asm/cpu-features.h>
-+#include <asm/isa-rev.h>
-+#include <asm/uasm.h>
-+
-+#include "bpf_jit_comp.h"
-+
-+/* MIPS t0-t3 are not available in the n64 ABI */
-+#undef MIPS_R_T0
-+#undef MIPS_R_T1
-+#undef MIPS_R_T2
-+#undef MIPS_R_T3
-+
-+/* Stack is 16-byte aligned in n64 ABI */
-+#define MIPS_STACK_ALIGNMENT 16
-+
-+/* Extra 64-bit eBPF registers used by JIT */
-+#define JIT_REG_TC (MAX_BPF_JIT_REG + 0)
-+#define JIT_REG_ZX (MAX_BPF_JIT_REG + 1)
-+
-+/* Number of prologue bytes to skip when doing a tail call */
-+#define JIT_TCALL_SKIP 4
-+
-+/* Callee-saved CPU registers that the JIT must preserve */
-+#define JIT_CALLEE_REGS   \
-+	(BIT(MIPS_R_S0) | \
-+	 BIT(MIPS_R_S1) | \
-+	 BIT(MIPS_R_S2) | \
-+	 BIT(MIPS_R_S3) | \
-+	 BIT(MIPS_R_S4) | \
-+	 BIT(MIPS_R_S5) | \
-+	 BIT(MIPS_R_S6) | \
-+	 BIT(MIPS_R_S7) | \
-+	 BIT(MIPS_R_GP) | \
-+	 BIT(MIPS_R_FP) | \
-+	 BIT(MIPS_R_RA))
-+
-+/* Caller-saved CPU registers available for JIT use */
-+#define JIT_CALLER_REGS	  \
-+	(BIT(MIPS_R_A5) | \
-+	 BIT(MIPS_R_A6) | \
-+	 BIT(MIPS_R_A7))
-+/*
-+ * Mapping of 64-bit eBPF registers to 64-bit native MIPS registers.
-+ * MIPS registers t4 - t7 may be used by the JIT as temporary registers.
-+ * MIPS registers t8 - t9 are reserved for single-register common functions.
-+ */
-+static const u8 bpf2mips64[] = {
-+	/* Return value from in-kernel function, and exit value from eBPF */
-+	[BPF_REG_0] = MIPS_R_V0,
-+	/* Arguments from eBPF program to in-kernel function */
-+	[BPF_REG_1] = MIPS_R_A0,
-+	[BPF_REG_2] = MIPS_R_A1,
-+	[BPF_REG_3] = MIPS_R_A2,
-+	[BPF_REG_4] = MIPS_R_A3,
-+	[BPF_REG_5] = MIPS_R_A4,
-+	/* Callee-saved registers that in-kernel function will preserve */
-+	[BPF_REG_6] = MIPS_R_S0,
-+	[BPF_REG_7] = MIPS_R_S1,
-+	[BPF_REG_8] = MIPS_R_S2,
-+	[BPF_REG_9] = MIPS_R_S3,
-+	/* Read-only frame pointer to access the eBPF stack */
-+	[BPF_REG_FP] = MIPS_R_FP,
-+	/* Temporary register for blinding constants */
-+	[BPF_REG_AX] = MIPS_R_AT,
-+	/* Tail call count register, caller-saved */
-+	[JIT_REG_TC] = MIPS_R_A5,
-+	/* Constant for register zero-extension */
-+	[JIT_REG_ZX] = MIPS_R_V1,
-+};
-+
-+/*
-+ * MIPS 32-bit operations on 64-bit registers generate a sign-extended
-+ * result. However, the eBPF ISA mandates zero-extension, so we rely on the
-+ * verifier to add that for us (emit_zext_ver). In addition, ALU arithmetic
-+ * operations, right shift and byte swap require properly sign-extended
-+ * operands or the result is unpredictable. We emit explicit sign-extensions
-+ * in those cases.
-+ */
-+
-+/* Sign extension */
-+static void emit_sext(struct jit_context *ctx, u8 dst, u8 src)
-+{
-+	emit(ctx, sll, dst, src, 0);
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Zero extension */
-+static void emit_zext(struct jit_context *ctx, u8 dst)
-+{
-+	if (cpu_has_mips64r2 || cpu_has_mips64r6) {
-+		emit(ctx, dinsu, dst, MIPS_R_ZERO, 32, 32);
-+	} else {
-+		emit(ctx, and, dst, dst, bpf2mips64[JIT_REG_ZX]);
-+		access_reg(ctx, JIT_REG_ZX); /* We need the ZX register */
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Zero extension, if verifier does not do it for us  */
-+static void emit_zext_ver(struct jit_context *ctx, u8 dst)
-+{
-+	if (!ctx->program->aux->verifier_zext)
-+		emit_zext(ctx, dst);
-+}
-+
-+/* dst = imm (64-bit) */
-+static void emit_mov_i64(struct jit_context *ctx, u8 dst, u64 imm64)
-+{
-+	if (imm64 >= 0xffffffffffff8000ULL || imm64 < 0x8000ULL) {
-+		emit(ctx, daddiu, dst, MIPS_R_ZERO, (s16)imm64);
-+	} else if (imm64 >= 0xffffffff80000000ULL ||
-+		   (imm64 < 0x80000000 && imm64 > 0xffff)) {
-+		emit(ctx, lui, dst, (s16)(imm64 >> 16));
-+		emit(ctx, ori, dst, dst, (u16)imm64 & 0xffff);
-+	} else {
-+		u8 acc = MIPS_R_ZERO;
-+		int k;
-+
-+		for (k = 0; k < 4; k++) {
-+			u16 half = imm64 >> (48 - 16 * k);
-+
-+			if (acc == dst)
-+				emit(ctx, dsll, dst, dst, 16);
-+
-+			if (half) {
-+				emit(ctx, ori, dst, acc, half);
-+				acc = dst;
-+			}
-+		}
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* ALU immediate operation (64-bit) */
-+static void emit_alu_i64(struct jit_context *ctx, u8 dst, s32 imm, u8 op)
-+{
-+	switch (BPF_OP(op)) {
-+	/* dst = dst | imm */
-+	case BPF_OR:
-+		emit(ctx, ori, dst, dst, (u16)imm);
-+		break;
-+	/* dst = dst ^ imm */
-+	case BPF_XOR:
-+		emit(ctx, xori, dst, dst, (u16)imm);
-+		break;
-+	/* dst = -dst */
-+	case BPF_NEG:
-+		emit(ctx, dsubu, dst, MIPS_R_ZERO, dst);
-+		break;
-+	/* dst = dst << imm */
-+	case BPF_LSH:
-+		emit(ctx, dsll_safe, dst, dst, imm);
-+		break;
-+	/* dst = dst >> imm */
-+	case BPF_RSH:
-+		emit(ctx, dsrl_safe, dst, dst, imm);
-+		break;
-+	/* dst = dst >> imm (arithmetic) */
-+	case BPF_ARSH:
-+		emit(ctx, dsra_safe, dst, dst, imm);
-+		break;
-+	/* dst = dst + imm */
-+	case BPF_ADD:
-+		emit(ctx, daddiu, dst, dst, imm);
-+		break;
-+	/* dst = dst - imm */
-+	case BPF_SUB:
-+		emit(ctx, daddiu, dst, dst, -imm);
-+		break;
-+	default:
-+		/* Width-generic operations */
-+		emit_alu_i(ctx, dst, imm, op);
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* ALU register operation (64-bit) */
-+static void emit_alu_r64(struct jit_context *ctx, u8 dst, u8 src, u8 op)
-+{
-+	switch (BPF_OP(op)) {
-+	/* dst = dst << src */
-+	case BPF_LSH:
-+		emit(ctx, dsllv, dst, dst, src);
-+		break;
-+	/* dst = dst >> src */
-+	case BPF_RSH:
-+		emit(ctx, dsrlv, dst, dst, src);
-+		break;
-+	/* dst = dst >> src (arithmetic) */
-+	case BPF_ARSH:
-+		emit(ctx, dsrav, dst, dst, src);
-+		break;
-+	/* dst = dst + src */
-+	case BPF_ADD:
-+		emit(ctx, daddu, dst, dst, src);
-+		break;
-+	/* dst = dst - src */
-+	case BPF_SUB:
-+		emit(ctx, dsubu, dst, dst, src);
-+		break;
-+	/* dst = dst * src */
-+	case BPF_MUL:
-+		if (cpu_has_mips64r6) {
-+			emit(ctx, dmulu, dst, dst, src);
-+		} else {
-+			emit(ctx, dmultu, dst, src);
-+			emit(ctx, mflo, dst);
-+		}
-+		break;
-+	/* dst = dst / src */
-+	case BPF_DIV:
-+		if (cpu_has_mips64r6) {
-+			emit(ctx, ddivu_r6, dst, dst, src);
-+		} else {
-+			emit(ctx, ddivu, dst, src);
-+			emit(ctx, mflo, dst);
-+		}
-+		break;
-+	/* dst = dst % src */
-+	case BPF_MOD:
-+		if (cpu_has_mips64r6) {
-+			emit(ctx, dmodu, dst, dst, src);
-+		} else {
-+			emit(ctx, ddivu, dst, src);
-+			emit(ctx, mfhi, dst);
-+		}
-+		break;
-+	default:
-+		/* Width-generic operations */
-+		emit_alu_r(ctx, dst, src, op);
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Swap sub words in a register double word */
-+static void emit_swap_r64(struct jit_context *ctx, u8 dst, u8 mask, u32 bits)
-+{
-+	u8 tmp = MIPS_R_T9;
-+
-+	emit(ctx, and, tmp, dst, mask);  /* tmp = dst & mask  */
-+	emit(ctx, dsll, tmp, tmp, bits); /* tmp = tmp << bits */
-+	emit(ctx, dsrl, dst, dst, bits); /* dst = dst >> bits */
-+	emit(ctx, and, dst, dst, mask);  /* dst = dst & mask  */
-+	emit(ctx, or, dst, dst, tmp);    /* dst = dst | tmp   */
-+}
-+
-+/* Swap bytes and truncate a register double word, word or half word */
-+static void emit_bswap_r64(struct jit_context *ctx, u8 dst, u32 width)
-+{
-+	switch (width) {
-+	/* Swap bytes in a double word */
-+	case 64:
-+		if (cpu_has_mips64r2 || cpu_has_mips64r6) {
-+			emit(ctx, dsbh, dst, dst);
-+			emit(ctx, dshd, dst, dst);
-+		} else {
-+			u8 t1 = MIPS_R_T6;
-+			u8 t2 = MIPS_R_T7;
-+
-+			emit(ctx, dsll32, t2, dst, 0);  /* t2 = dst << 32    */
-+			emit(ctx, dsrl32, dst, dst, 0); /* dst = dst >> 32   */
-+			emit(ctx, or, dst, dst, t2);    /* dst = dst | t2    */
-+
-+			emit(ctx, ori, t2, MIPS_R_ZERO, 0xffff);
-+			emit(ctx, dsll32, t1, t2, 0);   /* t1 = t2 << 32     */
-+			emit(ctx, or, t1, t1, t2);      /* t1 = t1 | t2      */
-+			emit_swap_r64(ctx, dst, t1, 16);/* dst = swap16(dst) */
-+
-+			emit(ctx, lui, t2, 0xff);       /* t2 = 0x00ff0000   */
-+			emit(ctx, ori, t2, t2, 0xff);   /* t2 = t2 | 0x00ff  */
-+			emit(ctx, dsll32, t1, t2, 0);   /* t1 = t2 << 32     */
-+			emit(ctx, or, t1, t1, t2);      /* t1 = t1 | t2      */
-+			emit_swap_r64(ctx, dst, t1, 8); /* dst = swap8(dst)  */
-+		}
-+		break;
-+	/* Swap bytes in a half word */
-+	/* Swap bytes in a word */
-+	case 32:
-+	case 16:
-+		emit_sext(ctx, dst, dst);
-+		emit_bswap_r(ctx, dst, width);
-+		if (cpu_has_mips64r2 || cpu_has_mips64r6)
-+			emit_zext(ctx, dst);
-+		break;
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Truncate a register double word, word or half word */
-+static void emit_trunc_r64(struct jit_context *ctx, u8 dst, u32 width)
-+{
-+	switch (width) {
-+	case 64:
-+		break;
-+	/* Zero-extend a word */
-+	case 32:
-+		emit_zext(ctx, dst);
-+		break;
-+	/* Zero-extend a half word */
-+	case 16:
-+		emit(ctx, andi, dst, dst, 0xffff);
-+		break;
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Load operation: dst = *(size*)(src + off) */
-+static void emit_ldx(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 size)
-+{
-+	switch (size) {
-+	/* Load a byte */
-+	case BPF_B:
-+		emit(ctx, lbu, dst, off, src);
-+		break;
-+	/* Load a half word */
-+	case BPF_H:
-+		emit(ctx, lhu, dst, off, src);
-+		break;
-+	/* Load a word */
-+	case BPF_W:
-+		emit(ctx, lwu, dst, off, src);
-+		break;
-+	/* Load a double word */
-+	case BPF_DW:
-+		emit(ctx, ld, dst, off, src);
-+		break;
-+	}
-+	clobber_reg(ctx, dst);
-+}
-+
-+/* Store operation: *(size *)(dst + off) = src */
-+static void emit_stx(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 size)
-+{
-+	switch (size) {
-+	/* Store a byte */
-+	case BPF_B:
-+		emit(ctx, sb, src, off, dst);
-+		break;
-+	/* Store a half word */
-+	case BPF_H:
-+		emit(ctx, sh, src, off, dst);
-+		break;
-+	/* Store a word */
-+	case BPF_W:
-+		emit(ctx, sw, src, off, dst);
-+		break;
-+	/* Store a double word */
-+	case BPF_DW:
-+		emit(ctx, sd, src, off, dst);
-+		break;
-+	}
-+}
-+
-+/* Atomic read-modify-write */
-+static void emit_atomic_r64(struct jit_context *ctx,
-+			    u8 dst, u8 src, s16 off, u8 code)
-+{
-+	u8 t1 = MIPS_R_T6;
-+	u8 t2 = MIPS_R_T7;
-+
-+	emit(ctx, lld, t1, off, dst);
-+	switch (code) {
-+	case BPF_ADD:
-+		emit(ctx, daddu, t2, t1, src);
-+		break;
-+	case BPF_AND:
-+		emit(ctx, and, t2, t1, src);
-+		break;
-+	case BPF_OR:
-+		emit(ctx, or, t2, t1, src);
-+		break;
-+	case BPF_XOR:
-+		emit(ctx, xor, t2, t1, src);
-+		break;
-+	}
-+	emit(ctx, scd, t2, off, dst);
-+	emit(ctx, beqz, t2, -16);
-+	emit(ctx, nop); /* Delay slot */
-+}
-+
-+/* Function call */
-+static int emit_call(struct jit_context *ctx, const struct bpf_insn *insn)
-+{
-+	u8 zx = bpf2mips64[JIT_REG_ZX];
-+	u8 tmp = MIPS_R_T6;
-+	bool fixed;
-+	u64 addr;
-+
-+	/* Decode the call address */
-+	if (bpf_jit_get_func_addr(ctx->program, insn, false,
-+				  &addr, &fixed) < 0)
-+		return -1;
-+	if (!fixed)
-+		return -1;
-+
-+	/* Push caller-saved registers on stack */
-+	push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, 0, 0);
-+
-+	/* Emit function call */
-+	emit_mov_i64(ctx, tmp, addr);
-+	emit(ctx, jalr, MIPS_R_RA, tmp);
-+	emit(ctx, nop); /* Delay slot */
-+
-+	/* Restore caller-saved registers */
-+	pop_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, 0, 0);
-+
-+	/* Re-initialize the JIT zero-extension register if accessed */
-+	if (ctx->accessed & BIT(JIT_REG_ZX)) {
-+		emit(ctx, daddiu, zx, MIPS_R_ZERO, -1);
-+		emit(ctx, dsrl32, zx, zx, 0);
-+	}
-+
-+	clobber_reg(ctx, MIPS_R_RA);
-+	clobber_reg(ctx, MIPS_R_V0);
-+	clobber_reg(ctx, MIPS_R_V1);
-+	return 0;
-+}
-+
-+/* Function tail call */
-+static int emit_tail_call(struct jit_context *ctx)
-+{
-+	u8 ary = bpf2mips64[BPF_REG_2];
-+	u8 ind = bpf2mips64[BPF_REG_3];
-+	u8 tcc = bpf2mips64[JIT_REG_TC];
-+	u8 tmp = MIPS_R_T6;
-+	int off;
-+
-+	/*
-+	 * Tail call:
-+	 * eBPF R1 - function argument (context ptr), passed in a0-a1
-+	 * eBPF R2 - ptr to object with array of function entry points
-+	 * eBPF R3 - array index of function to be called
-+	 */
-+
-+	/* if (ind >= ary->map.max_entries) goto out */
-+	off = offsetof(struct bpf_array, map.max_entries);
-+	if (off > 0x7fff)
-+		return -1;
-+	emit(ctx, lwu, tmp, off, ary);            /* tmp = ary->map.max_entrs*/
-+	emit(ctx, sltu, tmp, ind, tmp);           /* tmp = ind < t1          */
-+	emit(ctx, beqz, tmp, get_offset(ctx, 1)); /* PC += off(1) if tmp == 0*/
-+
-+	/* if (--TCC < 0) goto out */
-+	emit(ctx, daddiu, tcc, tcc, -1);          /* tcc-- (delay slot)      */
-+	emit(ctx, bltz, tcc, get_offset(ctx, 1)); /* PC += off(1) if tcc < 0 */
-+						  /* (next insn delay slot)  */
-+	/* prog = ary->ptrs[ind] */
-+	off = offsetof(struct bpf_array, ptrs);
-+	if (off > 0x7fff)
-+		return -1;
-+	emit(ctx, dsll, tmp, ind, 3);             /* tmp = ind << 3          */
-+	emit(ctx, daddu, tmp, tmp, ary);          /* tmp += ary              */
-+	emit(ctx, ld, tmp, off, tmp);             /* tmp = *(tmp + off)      */
-+
-+	/* if (prog == 0) goto out */
-+	emit(ctx, beqz, tmp, get_offset(ctx, 1)); /* PC += off(1) if tmp == 0*/
-+	emit(ctx, nop);                           /* Delay slot              */
-+
-+	/* func = prog->bpf_func + 8 (prologue skip offset) */
-+	off = offsetof(struct bpf_prog, bpf_func);
-+	if (off > 0x7fff)
-+		return -1;
-+	emit(ctx, ld, tmp, off, tmp);                /* tmp = *(tmp + off)   */
-+	emit(ctx, daddiu, tmp, tmp, JIT_TCALL_SKIP); /* tmp += skip (4)      */
-+
-+	/* goto func */
-+	build_epilogue(ctx, tmp);
-+	access_reg(ctx, JIT_REG_TC);
-+	return 0;
-+}
-+
-+/*
-+ * Stack frame layout for a JITed program (stack grows down).
-+ *
-+ * Higher address  : Previous stack frame      :
-+ *                 +===========================+  <--- MIPS sp before call
-+ *                 | Callee-saved registers,   |
-+ *                 | including RA and FP       |
-+ *                 +---------------------------+  <--- eBPF FP (MIPS fp)
-+ *                 | Local eBPF variables      |
-+ *                 | allocated by program      |
-+ *                 +---------------------------+
-+ *                 | Reserved for caller-saved |
-+ *                 | registers                 |
-+ * Lower address   +===========================+  <--- MIPS sp
-+ */
-+
-+/* Build program prologue to set up the stack and registers */
-+void build_prologue(struct jit_context *ctx)
-+{
-+	u8 fp = bpf2mips64[BPF_REG_FP];
-+	u8 tc = bpf2mips64[JIT_REG_TC];
-+	u8 zx = bpf2mips64[JIT_REG_ZX];
-+	int stack, saved, locals, reserved;
-+
-+	/*
-+	 * The first instruction initializes the tail call count register.
-+	 * On a tail call, the calling function jumps into the prologue
-+	 * after this instruction.
-+	 */
-+	emit(ctx, addiu, tc, MIPS_R_ZERO, min(MAX_TAIL_CALL_CNT + 1, 0xffff));
-+
-+	/* === Entry-point for tail calls === */
-+
-+	/*
-+	 * If the eBPF frame pointer and tail call count registers were
-+	 * accessed they must be preserved. Mark them as clobbered here
-+	 * to save and restore them on the stack as needed.
-+	 */
-+	if (ctx->accessed & BIT(BPF_REG_FP))
-+		clobber_reg(ctx, fp);
-+	if (ctx->accessed & BIT(JIT_REG_TC))
-+		clobber_reg(ctx, tc);
-+	if (ctx->accessed & BIT(JIT_REG_ZX))
-+		clobber_reg(ctx, zx);
-+
-+	/* Compute the stack space needed for callee-saved registers */
-+	saved = hweight32(ctx->clobbered & JIT_CALLEE_REGS) * sizeof(u64);
-+	saved = ALIGN(saved, MIPS_STACK_ALIGNMENT);
-+
-+	/* Stack space used by eBPF program local data */
-+	locals = ALIGN(ctx->program->aux->stack_depth, MIPS_STACK_ALIGNMENT);
-+
-+	/*
-+	 * If we are emitting function calls, reserve extra stack space for
-+	 * caller-saved registers needed by the JIT. The required space is
-+	 * computed automatically during resource usage discovery (pass 1).
-+	 */
-+	reserved = ctx->stack_used;
-+
-+	/* Allocate the stack frame */
-+	stack = ALIGN(saved + locals + reserved, MIPS_STACK_ALIGNMENT);
-+	if (stack)
-+		emit(ctx, daddiu, MIPS_R_SP, MIPS_R_SP, -stack);
-+
-+	/* Store callee-saved registers on stack */
-+	push_regs(ctx, ctx->clobbered & JIT_CALLEE_REGS, 0, stack - saved);
-+
-+	/* Initialize the eBPF frame pointer if accessed */
-+	if (ctx->accessed & BIT(BPF_REG_FP))
-+		emit(ctx, daddiu, fp, MIPS_R_SP, stack - saved);
-+
-+	/* Initialize the ePF JIT zero-extension register if accessed */
-+	if (ctx->accessed & BIT(JIT_REG_ZX)) {
-+		emit(ctx, daddiu, zx, MIPS_R_ZERO, -1);
-+		emit(ctx, dsrl32, zx, zx, 0);
-+	}
-+
-+	ctx->saved_size = saved;
-+	ctx->stack_size = stack;
-+}
-+
-+/* Build the program epilogue to restore the stack and registers */
-+void build_epilogue(struct jit_context *ctx, int dest_reg)
-+{
-+	/* Restore callee-saved registers from stack */
-+	pop_regs(ctx, ctx->clobbered & JIT_CALLEE_REGS, 0,
-+		 ctx->stack_size - ctx->saved_size);
-+
-+	/* Release the stack frame */
-+	if (ctx->stack_size)
-+		emit(ctx, daddiu, MIPS_R_SP, MIPS_R_SP, ctx->stack_size);
-+
-+	/* Jump to return address and sign-extend the 32-bit return value */
-+	emit(ctx, jr, dest_reg);
-+	emit(ctx, sll, MIPS_R_V0, MIPS_R_V0, 0); /* Delay slot */
-+}
-+
-+/* Build one eBPF instruction */
-+int build_insn(const struct bpf_insn *insn, struct jit_context *ctx)
-+{
-+	u8 dst = bpf2mips64[insn->dst_reg];
-+	u8 src = bpf2mips64[insn->src_reg];
-+	u8 code = insn->code;
-+	s16 off = insn->off;
-+	s32 imm = insn->imm;
-+	s32 val, rel;
-+	u8 alu, jmp;
-+
-+	switch (code) {
-+	/* ALU operations */
-+	/* dst = imm */
-+	case BPF_ALU | BPF_MOV | BPF_K:
-+		emit_mov_i(ctx, dst, imm);
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = src */
-+	case BPF_ALU | BPF_MOV | BPF_X:
-+		if (imm == 1) {
-+			/* Special mov32 for zext */
-+			emit_zext(ctx, dst);
-+		} else {
-+			emit_mov_r(ctx, dst, src);
-+			emit_zext_ver(ctx, dst);
-+		}
-+		break;
-+	/* dst = -dst */
-+	case BPF_ALU | BPF_NEG:
-+		emit_sext(ctx, dst, dst);
-+		emit_alu_i(ctx, dst, 0, BPF_NEG);
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = dst & imm */
-+	/* dst = dst | imm */
-+	/* dst = dst ^ imm */
-+	/* dst = dst << imm */
-+	case BPF_ALU | BPF_OR | BPF_K:
-+	case BPF_ALU | BPF_AND | BPF_K:
-+	case BPF_ALU | BPF_XOR | BPF_K:
-+	case BPF_ALU | BPF_LSH | BPF_K:
-+		if (!valid_alu_i(BPF_OP(code), imm)) {
-+			emit_mov_i(ctx, MIPS_R_T4, imm);
-+			emit_alu_r(ctx, dst, MIPS_R_T4, BPF_OP(code));
-+		} else if (rewrite_alu_i(BPF_OP(code), imm, &alu, &val)) {
-+			emit_alu_i(ctx, dst, val, alu);
-+		}
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = dst >> imm */
-+	/* dst = dst >> imm (arithmetic) */
-+	/* dst = dst + imm */
-+	/* dst = dst - imm */
-+	/* dst = dst * imm */
-+	/* dst = dst / imm */
-+	/* dst = dst % imm */
-+	case BPF_ALU | BPF_RSH | BPF_K:
-+	case BPF_ALU | BPF_ARSH | BPF_K:
-+	case BPF_ALU | BPF_ADD | BPF_K:
-+	case BPF_ALU | BPF_SUB | BPF_K:
-+	case BPF_ALU | BPF_MUL | BPF_K:
-+	case BPF_ALU | BPF_DIV | BPF_K:
-+	case BPF_ALU | BPF_MOD | BPF_K:
-+		if (!valid_alu_i(BPF_OP(code), imm)) {
-+			emit_sext(ctx, dst, dst);
-+			emit_mov_i(ctx, MIPS_R_T4, imm);
-+			emit_alu_r(ctx, dst, MIPS_R_T4, BPF_OP(code));
-+		} else if (rewrite_alu_i(BPF_OP(code), imm, &alu, &val)) {
-+			emit_sext(ctx, dst, dst);
-+			emit_alu_i(ctx, dst, val, alu);
-+		}
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = dst & src */
-+	/* dst = dst | src */
-+	/* dst = dst ^ src */
-+	/* dst = dst << src */
-+	case BPF_ALU | BPF_AND | BPF_X:
-+	case BPF_ALU | BPF_OR | BPF_X:
-+	case BPF_ALU | BPF_XOR | BPF_X:
-+	case BPF_ALU | BPF_LSH | BPF_X:
-+		emit_alu_r(ctx, dst, src, BPF_OP(code));
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = dst >> src */
-+	/* dst = dst >> src (arithmetic) */
-+	/* dst = dst + src */
-+	/* dst = dst - src */
-+	/* dst = dst * src */
-+	/* dst = dst / src */
-+	/* dst = dst % src */
-+	case BPF_ALU | BPF_RSH | BPF_X:
-+	case BPF_ALU | BPF_ARSH | BPF_X:
-+	case BPF_ALU | BPF_ADD | BPF_X:
-+	case BPF_ALU | BPF_SUB | BPF_X:
-+	case BPF_ALU | BPF_MUL | BPF_X:
-+	case BPF_ALU | BPF_DIV | BPF_X:
-+	case BPF_ALU | BPF_MOD | BPF_X:
-+		emit_sext(ctx, dst, dst);
-+		emit_sext(ctx, MIPS_R_T4, src);
-+		emit_alu_r(ctx, dst, MIPS_R_T4, BPF_OP(code));
-+		emit_zext_ver(ctx, dst);
-+		break;
-+	/* dst = imm (64-bit) */
-+	case BPF_ALU64 | BPF_MOV | BPF_K:
-+		emit_mov_i(ctx, dst, imm);
-+		break;
-+	/* dst = src (64-bit) */
-+	case BPF_ALU64 | BPF_MOV | BPF_X:
-+		emit_mov_r(ctx, dst, src);
-+		break;
-+	/* dst = -dst (64-bit) */
-+	case BPF_ALU64 | BPF_NEG:
-+		emit_alu_i64(ctx, dst, 0, BPF_NEG);
-+		break;
-+	/* dst = dst & imm (64-bit) */
-+	/* dst = dst | imm (64-bit) */
-+	/* dst = dst ^ imm (64-bit) */
-+	/* dst = dst << imm (64-bit) */
-+	/* dst = dst >> imm (64-bit) */
-+	/* dst = dst >> imm ((64-bit, arithmetic) */
-+	/* dst = dst + imm (64-bit) */
-+	/* dst = dst - imm (64-bit) */
-+	/* dst = dst * imm (64-bit) */
-+	/* dst = dst / imm (64-bit) */
-+	/* dst = dst % imm (64-bit) */
-+	case BPF_ALU64 | BPF_AND | BPF_K:
-+	case BPF_ALU64 | BPF_OR | BPF_K:
-+	case BPF_ALU64 | BPF_XOR | BPF_K:
-+	case BPF_ALU64 | BPF_LSH | BPF_K:
-+	case BPF_ALU64 | BPF_RSH | BPF_K:
-+	case BPF_ALU64 | BPF_ARSH | BPF_K:
-+	case BPF_ALU64 | BPF_ADD | BPF_K:
-+	case BPF_ALU64 | BPF_SUB | BPF_K:
-+	case BPF_ALU64 | BPF_MUL | BPF_K:
-+	case BPF_ALU64 | BPF_DIV | BPF_K:
-+	case BPF_ALU64 | BPF_MOD | BPF_K:
-+		if (!valid_alu_i(BPF_OP(code), imm)) {
-+			emit_mov_i(ctx, MIPS_R_T4, imm);
-+			emit_alu_r64(ctx, dst, MIPS_R_T4, BPF_OP(code));
-+		} else if (rewrite_alu_i(BPF_OP(code), imm, &alu, &val)) {
-+			emit_alu_i64(ctx, dst, val, alu);
-+		}
-+		break;
-+	/* dst = dst & src (64-bit) */
-+	/* dst = dst | src (64-bit) */
-+	/* dst = dst ^ src (64-bit) */
-+	/* dst = dst << src (64-bit) */
-+	/* dst = dst >> src (64-bit) */
-+	/* dst = dst >> src (64-bit, arithmetic) */
-+	/* dst = dst + src (64-bit) */
-+	/* dst = dst - src (64-bit) */
-+	/* dst = dst * src (64-bit) */
-+	/* dst = dst / src (64-bit) */
-+	/* dst = dst % src (64-bit) */
-+	case BPF_ALU64 | BPF_AND | BPF_X:
-+	case BPF_ALU64 | BPF_OR | BPF_X:
-+	case BPF_ALU64 | BPF_XOR | BPF_X:
-+	case BPF_ALU64 | BPF_LSH | BPF_X:
-+	case BPF_ALU64 | BPF_RSH | BPF_X:
-+	case BPF_ALU64 | BPF_ARSH | BPF_X:
-+	case BPF_ALU64 | BPF_ADD | BPF_X:
-+	case BPF_ALU64 | BPF_SUB | BPF_X:
-+	case BPF_ALU64 | BPF_MUL | BPF_X:
-+	case BPF_ALU64 | BPF_DIV | BPF_X:
-+	case BPF_ALU64 | BPF_MOD | BPF_X:
-+		emit_alu_r64(ctx, dst, src, BPF_OP(code));
-+		break;
-+	/* dst = htole(dst) */
-+	/* dst = htobe(dst) */
-+	case BPF_ALU | BPF_END | BPF_FROM_LE:
-+	case BPF_ALU | BPF_END | BPF_FROM_BE:
-+		if (BPF_SRC(code) ==
-+#ifdef __BIG_ENDIAN
-+		    BPF_FROM_LE
-+#else
-+		    BPF_FROM_BE
-+#endif
-+		    )
-+			emit_bswap_r64(ctx, dst, imm);
-+		else
-+			emit_trunc_r64(ctx, dst, imm);
-+		break;
-+	/* dst = imm64 */
-+	case BPF_LD | BPF_IMM | BPF_DW:
-+		emit_mov_i64(ctx, dst, (u32)imm | ((u64)insn[1].imm << 32));
-+		return 1;
-+	/* LDX: dst = *(size *)(src + off) */
-+	case BPF_LDX | BPF_MEM | BPF_W:
-+	case BPF_LDX | BPF_MEM | BPF_H:
-+	case BPF_LDX | BPF_MEM | BPF_B:
-+	case BPF_LDX | BPF_MEM | BPF_DW:
-+		emit_ldx(ctx, dst, src, off, BPF_SIZE(code));
-+		break;
-+	/* ST: *(size *)(dst + off) = imm */
-+	case BPF_ST | BPF_MEM | BPF_W:
-+	case BPF_ST | BPF_MEM | BPF_H:
-+	case BPF_ST | BPF_MEM | BPF_B:
-+	case BPF_ST | BPF_MEM | BPF_DW:
-+		emit_mov_i(ctx, MIPS_R_T4, imm);
-+		emit_stx(ctx, dst, MIPS_R_T4, off, BPF_SIZE(code));
-+		break;
-+	/* STX: *(size *)(dst + off) = src */
-+	case BPF_STX | BPF_MEM | BPF_W:
-+	case BPF_STX | BPF_MEM | BPF_H:
-+	case BPF_STX | BPF_MEM | BPF_B:
-+	case BPF_STX | BPF_MEM | BPF_DW:
-+		emit_stx(ctx, dst, src, off, BPF_SIZE(code));
-+		break;
-+	/* Speculation barrier */
-+	case BPF_ST | BPF_NOSPEC:
-+		break;
-+	/* Atomics */
-+	case BPF_STX | BPF_XADD | BPF_W:
-+	case BPF_STX | BPF_XADD | BPF_DW:
-+		switch (imm) {
-+		case BPF_ADD:
-+		case BPF_AND:
-+		case BPF_OR:
-+		case BPF_XOR:
-+			if (BPF_SIZE(code) == BPF_DW) {
-+				emit_atomic_r64(ctx, dst, src, off, imm);
-+			} else { /* 32-bit, no fetch */
-+				emit_sext(ctx, MIPS_R_T4, src);
-+				emit_atomic_r(ctx, dst, MIPS_R_T4, off, imm);
-+			}
-+			break;
-+		default:
-+			goto notyet;
-+		}
-+		break;
-+	/* PC += off if dst == src */
-+	/* PC += off if dst != src */
-+	/* PC += off if dst & src */
-+	/* PC += off if dst > src */
-+	/* PC += off if dst >= src */
-+	/* PC += off if dst < src */
-+	/* PC += off if dst <= src */
-+	/* PC += off if dst > src (signed) */
-+	/* PC += off if dst >= src (signed) */
-+	/* PC += off if dst < src (signed) */
-+	/* PC += off if dst <= src (signed) */
-+	case BPF_JMP32 | BPF_JEQ | BPF_X:
-+	case BPF_JMP32 | BPF_JNE | BPF_X:
-+	case BPF_JMP32 | BPF_JSET | BPF_X:
-+	case BPF_JMP32 | BPF_JGT | BPF_X:
-+	case BPF_JMP32 | BPF_JGE | BPF_X:
-+	case BPF_JMP32 | BPF_JLT | BPF_X:
-+	case BPF_JMP32 | BPF_JLE | BPF_X:
-+	case BPF_JMP32 | BPF_JSGT | BPF_X:
-+	case BPF_JMP32 | BPF_JSGE | BPF_X:
-+	case BPF_JMP32 | BPF_JSLT | BPF_X:
-+	case BPF_JMP32 | BPF_JSLE | BPF_X:
-+		if (off == 0)
-+			break;
-+		setup_jmp_r(ctx, dst == src, BPF_OP(code), off, &jmp, &rel);
-+		emit_sext(ctx, MIPS_R_T4, dst); /* Sign-extended dst */
-+		emit_sext(ctx, MIPS_R_T5, src); /* Sign-extended src */
-+		emit_jmp_r(ctx, MIPS_R_T4, MIPS_R_T5, rel, jmp);
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off if dst == imm */
-+	/* PC += off if dst != imm */
-+	/* PC += off if dst & imm */
-+	/* PC += off if dst > imm */
-+	/* PC += off if dst >= imm */
-+	/* PC += off if dst < imm */
-+	/* PC += off if dst <= imm */
-+	/* PC += off if dst > imm (signed) */
-+	/* PC += off if dst >= imm (signed) */
-+	/* PC += off if dst < imm (signed) */
-+	/* PC += off if dst <= imm (signed) */
-+	case BPF_JMP32 | BPF_JEQ | BPF_K:
-+	case BPF_JMP32 | BPF_JNE | BPF_K:
-+	case BPF_JMP32 | BPF_JSET | BPF_K:
-+	case BPF_JMP32 | BPF_JGT | BPF_K:
-+	case BPF_JMP32 | BPF_JGE | BPF_K:
-+	case BPF_JMP32 | BPF_JLT | BPF_K:
-+	case BPF_JMP32 | BPF_JLE | BPF_K:
-+	case BPF_JMP32 | BPF_JSGT | BPF_K:
-+	case BPF_JMP32 | BPF_JSGE | BPF_K:
-+	case BPF_JMP32 | BPF_JSLT | BPF_K:
-+	case BPF_JMP32 | BPF_JSLE | BPF_K:
-+		if (off == 0)
-+			break;
-+		setup_jmp_i(ctx, imm, 32, BPF_OP(code), off, &jmp, &rel);
-+		emit_sext(ctx, MIPS_R_T4, dst); /* Sign-extended dst */
-+		if (valid_jmp_i(jmp, imm)) {
-+			emit_jmp_i(ctx, MIPS_R_T4, imm, rel, jmp);
-+		} else {
-+			/* Move large immediate to register, sign-extended */
-+			emit_mov_i(ctx, MIPS_R_T5, imm);
-+			emit_jmp_r(ctx, MIPS_R_T4, MIPS_R_T5, rel, jmp);
-+		}
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off if dst == src */
-+	/* PC += off if dst != src */
-+	/* PC += off if dst & src */
-+	/* PC += off if dst > src */
-+	/* PC += off if dst >= src */
-+	/* PC += off if dst < src */
-+	/* PC += off if dst <= src */
-+	/* PC += off if dst > src (signed) */
-+	/* PC += off if dst >= src (signed) */
-+	/* PC += off if dst < src (signed) */
-+	/* PC += off if dst <= src (signed) */
-+	case BPF_JMP | BPF_JEQ | BPF_X:
-+	case BPF_JMP | BPF_JNE | BPF_X:
-+	case BPF_JMP | BPF_JSET | BPF_X:
-+	case BPF_JMP | BPF_JGT | BPF_X:
-+	case BPF_JMP | BPF_JGE | BPF_X:
-+	case BPF_JMP | BPF_JLT | BPF_X:
-+	case BPF_JMP | BPF_JLE | BPF_X:
-+	case BPF_JMP | BPF_JSGT | BPF_X:
-+	case BPF_JMP | BPF_JSGE | BPF_X:
-+	case BPF_JMP | BPF_JSLT | BPF_X:
-+	case BPF_JMP | BPF_JSLE | BPF_X:
-+		if (off == 0)
-+			break;
-+		setup_jmp_r(ctx, dst == src, BPF_OP(code), off, &jmp, &rel);
-+		emit_jmp_r(ctx, dst, src, rel, jmp);
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off if dst == imm */
-+	/* PC += off if dst != imm */
-+	/* PC += off if dst & imm */
-+	/* PC += off if dst > imm */
-+	/* PC += off if dst >= imm */
-+	/* PC += off if dst < imm */
-+	/* PC += off if dst <= imm */
-+	/* PC += off if dst > imm (signed) */
-+	/* PC += off if dst >= imm (signed) */
-+	/* PC += off if dst < imm (signed) */
-+	/* PC += off if dst <= imm (signed) */
-+	case BPF_JMP | BPF_JEQ | BPF_K:
-+	case BPF_JMP | BPF_JNE | BPF_K:
-+	case BPF_JMP | BPF_JSET | BPF_K:
-+	case BPF_JMP | BPF_JGT | BPF_K:
-+	case BPF_JMP | BPF_JGE | BPF_K:
-+	case BPF_JMP | BPF_JLT | BPF_K:
-+	case BPF_JMP | BPF_JLE | BPF_K:
-+	case BPF_JMP | BPF_JSGT | BPF_K:
-+	case BPF_JMP | BPF_JSGE | BPF_K:
-+	case BPF_JMP | BPF_JSLT | BPF_K:
-+	case BPF_JMP | BPF_JSLE | BPF_K:
-+		if (off == 0)
-+			break;
-+		setup_jmp_i(ctx, imm, 64, BPF_OP(code), off, &jmp, &rel);
-+		if (valid_jmp_i(jmp, imm)) {
-+			emit_jmp_i(ctx, dst, imm, rel, jmp);
-+		} else {
-+			/* Move large immediate to register */
-+			emit_mov_i(ctx, MIPS_R_T4, imm);
-+			emit_jmp_r(ctx, dst, MIPS_R_T4, rel, jmp);
-+		}
-+		if (finish_jmp(ctx, jmp, off) < 0)
-+			goto toofar;
-+		break;
-+	/* PC += off */
-+	case BPF_JMP | BPF_JA:
-+		if (off == 0)
-+			break;
-+		if (emit_ja(ctx, off) < 0)
-+			goto toofar;
-+		break;
-+	/* Tail call */
-+	case BPF_JMP | BPF_TAIL_CALL:
-+		if (emit_tail_call(ctx) < 0)
-+			goto invalid;
-+		break;
-+	/* Function call */
-+	case BPF_JMP | BPF_CALL:
-+		if (emit_call(ctx, insn) < 0)
-+			goto invalid;
-+		break;
-+	/* Function return */
-+	case BPF_JMP | BPF_EXIT:
-+		/*
-+		 * Optimization: when last instruction is EXIT
-+		 * simply continue to epilogue.
-+		 */
-+		if (ctx->bpf_index == ctx->program->len - 1)
-+			break;
-+		if (emit_exit(ctx) < 0)
-+			goto toofar;
-+		break;
-+
-+	default:
-+invalid:
-+		pr_err_once("unknown opcode %02x\n", code);
-+		return -EINVAL;
-+notyet:
-+		pr_info_once("*** NOT YET: opcode %02x ***\n", code);
-+		return -EFAULT;
-+toofar:
-+		pr_info_once("*** TOO FAR: jump at %u opcode %02x ***\n",
-+			     ctx->bpf_index, code);
-+		return -E2BIG;
-+	}
-+	return 0;
-+}
diff --git a/target/linux/generic/backport-5.10/050-v5.16-04-mips-bpf-Add-JIT-workarounds-for-CPU-errata.patch b/target/linux/generic/backport-5.10/050-v5.16-04-mips-bpf-Add-JIT-workarounds-for-CPU-errata.patch
deleted file mode 100644
index 63553ebe5842..000000000000
--- a/target/linux/generic/backport-5.10/050-v5.16-04-mips-bpf-Add-JIT-workarounds-for-CPU-errata.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:06 +0200
-Subject: [PATCH] mips: bpf: Add JIT workarounds for CPU errata
-
-This patch adds workarounds for the following CPU errata to the MIPS
-eBPF JIT, if enabled in the kernel configuration.
-
-  - R10000 ll/sc weak ordering
-  - Loongson-3 ll/sc weak ordering
-  - Loongson-2F jump hang
-
-The Loongson-2F nop errata is implemented in uasm, which the JIT uses,
-so no additional mitigations are needed for that.
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
----
-
---- a/arch/mips/net/bpf_jit_comp.c
-+++ b/arch/mips/net/bpf_jit_comp.c
-@@ -404,6 +404,7 @@ void emit_alu_r(struct jit_context *ctx,
- /* Atomic read-modify-write (32-bit) */
- void emit_atomic_r(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 code)
- {
-+	LLSC_sync(ctx);
- 	emit(ctx, ll, MIPS_R_T9, off, dst);
- 	switch (code) {
- 	case BPF_ADD:
-@@ -420,18 +421,19 @@ void emit_atomic_r(struct jit_context *c
- 		break;
- 	}
- 	emit(ctx, sc, MIPS_R_T8, off, dst);
--	emit(ctx, beqz, MIPS_R_T8, -16);
-+	emit(ctx, LLSC_beqz, MIPS_R_T8, -16 - LLSC_offset);
- 	emit(ctx, nop); /* Delay slot */
- }
- 
- /* Atomic compare-and-exchange (32-bit) */
- void emit_cmpxchg_r(struct jit_context *ctx, u8 dst, u8 src, u8 res, s16 off)
- {
-+	LLSC_sync(ctx);
- 	emit(ctx, ll, MIPS_R_T9, off, dst);
- 	emit(ctx, bne, MIPS_R_T9, res, 12);
- 	emit(ctx, move, MIPS_R_T8, src);     /* Delay slot */
- 	emit(ctx, sc, MIPS_R_T8, off, dst);
--	emit(ctx, beqz, MIPS_R_T8, -20);
-+	emit(ctx, LLSC_beqz, MIPS_R_T8, -20 - LLSC_offset);
- 	emit(ctx, move, res, MIPS_R_T9);     /* Delay slot */
- 	clobber_reg(ctx, res);
- }
---- a/arch/mips/net/bpf_jit_comp.h
-+++ b/arch/mips/net/bpf_jit_comp.h
-@@ -87,7 +87,7 @@ struct jit_context {
- };
- 
- /* Emit the instruction if the JIT memory space has been allocated */
--#define emit(ctx, func, ...)					\
-+#define __emit(ctx, func, ...)					\
- do {								\
- 	if ((ctx)->target != NULL) {				\
- 		u32 *p = &(ctx)->target[ctx->jit_index];	\
-@@ -95,6 +95,30 @@ do {								\
- 	}							\
- 	(ctx)->jit_index++;					\
- } while (0)
-+#define emit(...) __emit(__VA_ARGS__)
-+
-+/* Workaround for R10000 ll/sc errata */
-+#ifdef CONFIG_WAR_R10000
-+#define LLSC_beqz	beqzl
-+#else
-+#define LLSC_beqz	beqz
-+#endif
-+
-+/* Workaround for Loongson-3 ll/sc errata */
-+#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS
-+#define LLSC_sync(ctx)	emit(ctx, sync, 0)
-+#define LLSC_offset	4
-+#else
-+#define LLSC_sync(ctx)
-+#define LLSC_offset	0
-+#endif
-+
-+/* Workaround for Loongson-2F jump errata */
-+#ifdef CONFIG_CPU_JUMP_WORKAROUNDS
-+#define JALR_MASK	0xffffffffcfffffffULL
-+#else
-+#define JALR_MASK	(~0ULL)
-+#endif
- 
- /*
-  * Mark a BPF register as accessed, it needs to be
---- a/arch/mips/net/bpf_jit_comp64.c
-+++ b/arch/mips/net/bpf_jit_comp64.c
-@@ -375,6 +375,7 @@ static void emit_atomic_r64(struct jit_c
- 	u8 t1 = MIPS_R_T6;
- 	u8 t2 = MIPS_R_T7;
- 
-+	LLSC_sync(ctx);
- 	emit(ctx, lld, t1, off, dst);
- 	switch (code) {
- 	case BPF_ADD:
-@@ -391,7 +392,7 @@ static void emit_atomic_r64(struct jit_c
- 		break;
- 	}
- 	emit(ctx, scd, t2, off, dst);
--	emit(ctx, beqz, t2, -16);
-+	emit(ctx, LLSC_beqz, t2, -16 - LLSC_offset);
- 	emit(ctx, nop); /* Delay slot */
- }
- 
-@@ -414,7 +415,7 @@ static int emit_call(struct jit_context
- 	push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, 0, 0);
- 
- 	/* Emit function call */
--	emit_mov_i64(ctx, tmp, addr);
-+	emit_mov_i64(ctx, tmp, addr & JALR_MASK);
- 	emit(ctx, jalr, MIPS_R_RA, tmp);
- 	emit(ctx, nop); /* Delay slot */
- 
diff --git a/target/linux/generic/backport-5.10/050-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch b/target/linux/generic/backport-5.10/050-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch
deleted file mode 100644
index 10685c5f3c21..000000000000
--- a/target/linux/generic/backport-5.10/050-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:07 +0200
-Subject: [PATCH] mips: bpf: Enable eBPF JITs
-
-This patch enables the new eBPF JITs for 32-bit and 64-bit MIPS. It also
-disables the old cBPF JIT to so cBPF programs are converted to use the
-new JIT.
-
-Workarounds for R4000 CPU errata are not implemented by the JIT, so the
-JIT is disabled if any of those workarounds are configured.
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
----
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3294,6 +3294,7 @@ S:	Supported
- F:	arch/arm64/net/
- 
- BPF JIT for MIPS (32-BIT AND 64-BIT)
-+M:	Johan Almbladh <johan.almbladh@anyfinetworks.com>
- M:	Paul Burton <paulburton@kernel.org>
- L:	netdev@vger.kernel.org
- L:	bpf@vger.kernel.org
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -49,7 +49,6 @@ config MIPS
- 	select HAVE_ARCH_TRACEHOOK
- 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES
- 	select HAVE_ASM_MODVERSIONS
--	select HAVE_CBPF_JIT if !64BIT && !CPU_MICROMIPS
- 	select HAVE_CONTEXT_TRACKING
- 	select HAVE_TIF_NOHZ
- 	select HAVE_C_RECORDMCOUNT
-@@ -57,7 +56,10 @@ config MIPS
- 	select HAVE_DEBUG_STACKOVERFLOW
- 	select HAVE_DMA_CONTIGUOUS
- 	select HAVE_DYNAMIC_FTRACE
--	select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2
-+	select HAVE_EBPF_JIT if !CPU_MICROMIPS && \
-+				!CPU_DADDI_WORKAROUNDS && \
-+				!CPU_R4000_WORKAROUNDS && \
-+				!CPU_R4400_WORKAROUNDS
- 	select HAVE_EXIT_THREAD
- 	select HAVE_FAST_GUP
- 	select HAVE_FTRACE_MCOUNT_RECORD
---- a/arch/mips/net/Makefile
-+++ b/arch/mips/net/Makefile
-@@ -2,9 +2,10 @@
- # MIPS networking code
- 
- obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o
-+obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp.o
- 
- ifeq ($(CONFIG_32BIT),y)
--        obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp.o bpf_jit_comp32.o
-+        obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp32.o
- else
--        obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o
-+        obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp64.o
- endif
diff --git a/target/linux/generic/backport-5.10/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch b/target/linux/generic/backport-5.10/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch
deleted file mode 100644
index e25c336831dc..000000000000
--- a/target/linux/generic/backport-5.10/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch
+++ /dev/null
@@ -1,387 +0,0 @@
-From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
-Date: Tue, 5 Oct 2021 18:54:08 +0200
-Subject: [PATCH] mips: bpf: Remove old BPF JIT implementations
-
-This patch removes the old 32-bit cBPF and 64-bit eBPF JIT implementations.
-They are replaced by a new eBPF implementation that supports both 32-bit
-and 64-bit MIPS CPUs.
-
-Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
----
- delete mode 100644 arch/mips/net/bpf_jit.c
- delete mode 100644 arch/mips/net/bpf_jit.h
- delete mode 100644 arch/mips/net/bpf_jit_asm.S
- delete mode 100644 arch/mips/net/ebpf_jit.c
-
---- a/arch/mips/net/bpf_jit.h
-+++ /dev/null
-@@ -1,81 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0-only */
--/*
-- * Just-In-Time compiler for BPF filters on MIPS
-- *
-- * Copyright (c) 2014 Imagination Technologies Ltd.
-- * Author: Markos Chandras <markos.chandras@imgtec.com>
-- */
--
--#ifndef BPF_JIT_MIPS_OP_H
--#define BPF_JIT_MIPS_OP_H
--
--/* Registers used by JIT */
--#define MIPS_R_ZERO	0
--#define MIPS_R_V0	2
--#define MIPS_R_A0	4
--#define MIPS_R_A1	5
--#define MIPS_R_T4	12
--#define MIPS_R_T5	13
--#define MIPS_R_T6	14
--#define MIPS_R_T7	15
--#define MIPS_R_S0	16
--#define MIPS_R_S1	17
--#define MIPS_R_S2	18
--#define MIPS_R_S3	19
--#define MIPS_R_S4	20
--#define MIPS_R_S5	21
--#define MIPS_R_S6	22
--#define MIPS_R_S7	23
--#define MIPS_R_SP	29
--#define MIPS_R_RA	31
--
--/* Conditional codes */
--#define MIPS_COND_EQ	0x1
--#define MIPS_COND_GE	(0x1 << 1)
--#define MIPS_COND_GT	(0x1 << 2)
--#define MIPS_COND_NE	(0x1 << 3)
--#define MIPS_COND_ALL	(0x1 << 4)
--/* Conditionals on X register or K immediate */
--#define MIPS_COND_X	(0x1 << 5)
--#define MIPS_COND_K	(0x1 << 6)
--
--#define r_ret	MIPS_R_V0
--
--/*
-- * Use 2 scratch registers to avoid pipeline interlocks.
-- * There is no overhead during epilogue and prologue since
-- * any of the $s0-$s6 registers will only be preserved if
-- * they are going to actually be used.
-- */
--#define r_skb_hl	MIPS_R_S0 /* skb header length */
--#define r_skb_data	MIPS_R_S1 /* skb actual data */
--#define r_off		MIPS_R_S2
--#define r_A		MIPS_R_S3
--#define r_X		MIPS_R_S4
--#define r_skb		MIPS_R_S5
--#define r_M		MIPS_R_S6
--#define r_skb_len	MIPS_R_S7
--#define r_s0		MIPS_R_T4 /* scratch reg 1 */
--#define r_s1		MIPS_R_T5 /* scratch reg 2 */
--#define r_tmp_imm	MIPS_R_T6 /* No need to preserve this */
--#define r_tmp		MIPS_R_T7 /* No need to preserve this */
--#define r_zero		MIPS_R_ZERO
--#define r_sp		MIPS_R_SP
--#define r_ra		MIPS_R_RA
--
--#ifndef __ASSEMBLY__
--
--/* Declare ASM helpers */
--
--#define DECLARE_LOAD_FUNC(func) \
--	extern u8 func(unsigned long *skb, int offset); \
--	extern u8 func##_negative(unsigned long *skb, int offset); \
--	extern u8 func##_positive(unsigned long *skb, int offset)
--
--DECLARE_LOAD_FUNC(sk_load_word);
--DECLARE_LOAD_FUNC(sk_load_half);
--DECLARE_LOAD_FUNC(sk_load_byte);
--
--#endif
--
--#endif /* BPF_JIT_MIPS_OP_H */
---- a/arch/mips/net/bpf_jit_asm.S
-+++ /dev/null
-@@ -1,285 +0,0 @@
--/*
-- * bpf_jib_asm.S: Packet/header access helper functions for MIPS/MIPS64 BPF
-- * compiler.
-- *
-- * Copyright (C) 2015 Imagination Technologies Ltd.
-- * Author: Markos Chandras <markos.chandras@imgtec.com>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License as published by the
-- * Free Software Foundation; version 2 of the License.
-- */
--
--#include <asm/asm.h>
--#include <asm/isa-rev.h>
--#include <asm/regdef.h>
--#include "bpf_jit.h"
--
--/* ABI
-- *
-- * r_skb_hl	skb header length
-- * r_skb_data	skb data
-- * r_off(a1)	offset register
-- * r_A		BPF register A
-- * r_X		PF register X
-- * r_skb(a0)	*skb
-- * r_M		*scratch memory
-- * r_skb_le	skb length
-- * r_s0		Scratch register 0
-- * r_s1		Scratch register 1
-- *
-- * On entry:
-- * a0: *skb
-- * a1: offset (imm or imm + X)
-- *
-- * All non-BPF-ABI registers are free for use. On return, we only
-- * care about r_ret. The BPF-ABI registers are assumed to remain
-- * unmodified during the entire filter operation.
-- */
--
--#define skb	a0
--#define offset	a1
--#define SKF_LL_OFF  (-0x200000) /* Can't include linux/filter.h in assembly */
--
--	/* We know better :) so prevent assembler reordering etc */
--	.set 	noreorder
--
--#define is_offset_negative(TYPE)				\
--	/* If offset is negative we have more work to do */	\
--	slti	t0, offset, 0;					\
--	bgtz	t0, bpf_slow_path_##TYPE##_neg;			\
--	/* Be careful what follows in DS. */
--
--#define is_offset_in_header(SIZE, TYPE)				\
--	/* Reading from header? */				\
--	addiu	$r_s0, $r_skb_hl, -SIZE;			\
--	slt	t0, $r_s0, offset;				\
--	bgtz	t0, bpf_slow_path_##TYPE;			\
--
--LEAF(sk_load_word)
--	is_offset_negative(word)
--FEXPORT(sk_load_word_positive)
--	is_offset_in_header(4, word)
--	/* Offset within header boundaries */
--	PTR_ADDU t1, $r_skb_data, offset
--	.set	reorder
--	lw	$r_A, 0(t1)
--	.set	noreorder
--#ifdef CONFIG_CPU_LITTLE_ENDIAN
--# if MIPS_ISA_REV >= 2
--	wsbh	t0, $r_A
--	rotr	$r_A, t0, 16
--# else
--	sll	t0, $r_A, 24
--	srl	t1, $r_A, 24
--	srl	t2, $r_A, 8
--	or	t0, t0, t1
--	andi	t2, t2, 0xff00
--	andi	t1, $r_A, 0xff00
--	or	t0, t0, t2
--	sll	t1, t1, 8
--	or	$r_A, t0, t1
--# endif
--#endif
--	jr	$r_ra
--	 move	$r_ret, zero
--	END(sk_load_word)
--
--LEAF(sk_load_half)
--	is_offset_negative(half)
--FEXPORT(sk_load_half_positive)
--	is_offset_in_header(2, half)
--	/* Offset within header boundaries */
--	PTR_ADDU t1, $r_skb_data, offset
--	lhu	$r_A, 0(t1)
--#ifdef CONFIG_CPU_LITTLE_ENDIAN
--# if MIPS_ISA_REV >= 2
--	wsbh	$r_A, $r_A
--# else
--	sll	t0, $r_A, 8
--	srl	t1, $r_A, 8
--	andi	t0, t0, 0xff00
--	or	$r_A, t0, t1
--# endif
--#endif
--	jr	$r_ra
--	 move	$r_ret, zero
--	END(sk_load_half)
--
--LEAF(sk_load_byte)
--	is_offset_negative(byte)
--FEXPORT(sk_load_byte_positive)
--	is_offset_in_header(1, byte)
--	/* Offset within header boundaries */
--	PTR_ADDU t1, $r_skb_data, offset
--	lbu	$r_A, 0(t1)
--	jr	$r_ra
--	 move	$r_ret, zero
--	END(sk_load_byte)
--
--/*
-- * call skb_copy_bits:
-- * (prototype in linux/skbuff.h)
-- *
-- * int skb_copy_bits(sk_buff *skb, int offset, void *to, int len)
-- *
-- * o32 mandates we leave 4 spaces for argument registers in case
-- * the callee needs to use them. Even though we don't care about
-- * the argument registers ourselves, we need to allocate that space
-- * to remain ABI compliant since the callee may want to use that space.
-- * We also allocate 2 more spaces for $r_ra and our return register (*to).
-- *
-- * n64 is a bit different. The *caller* will allocate the space to preserve
-- * the arguments. So in 64-bit kernels, we allocate the 4-arg space for no
-- * good reason but it does not matter that much really.
-- *
-- * (void *to) is returned in r_s0
-- *
-- */
--#ifdef CONFIG_CPU_LITTLE_ENDIAN
--#define DS_OFFSET(SIZE) (4 * SZREG)
--#else
--#define DS_OFFSET(SIZE) ((4 * SZREG) + (4 - SIZE))
--#endif
--#define bpf_slow_path_common(SIZE)				\
--	/* Quick check. Are we within reasonable boundaries? */ \
--	LONG_ADDIU	$r_s1, $r_skb_len, -SIZE;		\
--	sltu		$r_s0, offset, $r_s1;			\
--	beqz		$r_s0, fault;				\
--	/* Load 4th argument in DS */				\
--	 LONG_ADDIU	a3, zero, SIZE;				\
--	PTR_ADDIU	$r_sp, $r_sp, -(6 * SZREG);		\
--	PTR_LA		t0, skb_copy_bits;			\
--	PTR_S		$r_ra, (5 * SZREG)($r_sp);		\
--	/* Assign low slot to a2 */				\
--	PTR_ADDIU	a2, $r_sp, DS_OFFSET(SIZE);		\
--	jalr		t0;					\
--	/* Reset our destination slot (DS but it's ok) */	\
--	 INT_S		zero, (4 * SZREG)($r_sp);		\
--	/*							\
--	 * skb_copy_bits returns 0 on success and -EFAULT	\
--	 * on error. Our data live in a2. Do not bother with	\
--	 * our data if an error has been returned.		\
--	 */							\
--	/* Restore our frame */					\
--	PTR_L		$r_ra, (5 * SZREG)($r_sp);		\
--	INT_L		$r_s0, (4 * SZREG)($r_sp);		\
--	bltz		v0, fault;				\
--	 PTR_ADDIU	$r_sp, $r_sp, 6 * SZREG;		\
--	move		$r_ret, zero;				\
--
--NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
--	bpf_slow_path_common(4)
--#ifdef CONFIG_CPU_LITTLE_ENDIAN
--# if MIPS_ISA_REV >= 2
--	wsbh	t0, $r_s0
--	jr	$r_ra
--	 rotr	$r_A, t0, 16
--# else
--	sll	t0, $r_s0, 24
--	srl	t1, $r_s0, 24
--	srl	t2, $r_s0, 8
--	or	t0, t0, t1
--	andi	t2, t2, 0xff00
--	andi	t1, $r_s0, 0xff00
--	or	t0, t0, t2
--	sll	t1, t1, 8
--	jr	$r_ra
--	 or	$r_A, t0, t1
--# endif
--#else
--	jr	$r_ra
--	 move	$r_A, $r_s0
--#endif
--
--	END(bpf_slow_path_word)
--
--NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
--	bpf_slow_path_common(2)
--#ifdef CONFIG_CPU_LITTLE_ENDIAN
--# if MIPS_ISA_REV >= 2
--	jr	$r_ra
--	 wsbh	$r_A, $r_s0
--# else
--	sll	t0, $r_s0, 8
--	andi	t1, $r_s0, 0xff00
--	andi	t0, t0, 0xff00
--	srl	t1, t1, 8
--	jr	$r_ra
--	 or	$r_A, t0, t1
--# endif
--#else
--	jr	$r_ra
--	 move	$r_A, $r_s0
--#endif
--
--	END(bpf_slow_path_half)
--
--NESTED(bpf_slow_path_byte, (6 * SZREG), $r_sp)
--	bpf_slow_path_common(1)
--	jr	$r_ra
--	 move	$r_A, $r_s0
--
--	END(bpf_slow_path_byte)
--
--/*
-- * Negative entry points
-- */
--	.macro bpf_is_end_of_data
--	li	t0, SKF_LL_OFF
--	/* Reading link layer data? */
--	slt	t1, offset, t0
--	bgtz	t1, fault
--	/* Be careful what follows in DS. */
--	.endm
--/*
-- * call skb_copy_bits:
-- * (prototype in linux/filter.h)
-- *
-- * void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb,
-- *                                            int k, unsigned int size)
-- *
-- * see above (bpf_slow_path_common) for ABI restrictions
-- */
--#define bpf_negative_common(SIZE)					\
--	PTR_ADDIU	$r_sp, $r_sp, -(6 * SZREG);			\
--	PTR_LA		t0, bpf_internal_load_pointer_neg_helper;	\
--	PTR_S		$r_ra, (5 * SZREG)($r_sp);			\
--	jalr		t0;						\
--	 li		a2, SIZE;					\
--	PTR_L		$r_ra, (5 * SZREG)($r_sp);			\
--	/* Check return pointer */					\
--	beqz		v0, fault;					\
--	 PTR_ADDIU	$r_sp, $r_sp, 6 * SZREG;			\
--	/* Preserve our pointer */					\
--	move		$r_s0, v0;					\
--	/* Set return value */						\
--	move		$r_ret, zero;					\
--
--bpf_slow_path_word_neg:
--	bpf_is_end_of_data
--NESTED(sk_load_word_negative, (6 * SZREG), $r_sp)
--	bpf_negative_common(4)
--	jr	$r_ra
--	 lw	$r_A, 0($r_s0)
--	END(sk_load_word_negative)
--
--bpf_slow_path_half_neg:
--	bpf_is_end_of_data
--NESTED(sk_load_half_negative, (6 * SZREG), $r_sp)
--	bpf_negative_common(2)
--	jr	$r_ra
--	 lhu	$r_A, 0($r_s0)
--	END(sk_load_half_negative)
--
--bpf_slow_path_byte_neg:
--	bpf_is_end_of_data
--NESTED(sk_load_byte_negative, (6 * SZREG), $r_sp)
--	bpf_negative_common(1)
--	jr	$r_ra
--	 lbu	$r_A, 0($r_s0)
--	END(sk_load_byte_negative)
--
--fault:
--	jr	$r_ra
--	 addiu $r_ret, zero, 1
diff --git a/target/linux/generic/backport-5.10/071-crypto-arm-chacha-neon-optimize-for-non-block-size-m.patch b/target/linux/generic/backport-5.10/071-crypto-arm-chacha-neon-optimize-for-non-block-size-m.patch
deleted file mode 100644
index b1f46e9af8c0..000000000000
--- a/target/linux/generic/backport-5.10/071-crypto-arm-chacha-neon-optimize-for-non-block-size-m.patch
+++ /dev/null
@@ -1,272 +0,0 @@
-From 03662fcd41f4b764857f17b95f9a2a63c24bddd4 Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Tue, 3 Nov 2020 17:28:09 +0100
-Subject: [PATCH 1/2] crypto: arm/chacha-neon - optimize for non-block size
- multiples
-
-commit 86cd97ec4b943af35562a74688bc4e909b32c3d1 upstream.
-
-The current NEON based ChaCha implementation for ARM is optimized for
-multiples of 4x the ChaCha block size (64 bytes). This makes sense for
-block encryption, but given that ChaCha is also often used in the
-context of networking, it makes sense to consider arbitrary length
-inputs as well.
-
-For example, WireGuard typically uses 1420 byte packets, and performing
-ChaCha encryption involves 5 invocations of chacha_4block_xor_neon()
-and 3 invocations of chacha_block_xor_neon(), where the last one also
-involves a memcpy() using a buffer on the stack to process the final
-chunk of 1420 % 64 == 12 bytes.
-
-Let's optimize for this case as well, by letting chacha_4block_xor_neon()
-deal with any input size between 64 and 256 bytes, using NEON permutation
-instructions and overlapping loads and stores. This way, the 140 byte
-tail of a 1420 byte input buffer can simply be processed in one go.
-
-This results in the following performance improvements for 1420 byte
-blocks, without significant impact on power-of-2 input sizes. (Note
-that Raspberry Pi is widely used in combination with a 32-bit kernel,
-even though the core is 64-bit capable)
-
-   Cortex-A8  (BeagleBone)       :   7%
-   Cortex-A15 (Calxeda Midway)   :  21%
-   Cortex-A53 (Raspberry Pi 3)   :   3%
-   Cortex-A72 (Raspberry Pi 4)   :  19%
-
-Cc: Eric Biggers <ebiggers@google.com>
-Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/chacha-glue.c      | 34 +++++------
- arch/arm/crypto/chacha-neon-core.S | 97 +++++++++++++++++++++++++++---
- 2 files changed, 107 insertions(+), 24 deletions(-)
-
---- a/arch/arm/crypto/chacha-glue.c
-+++ b/arch/arm/crypto/chacha-glue.c
-@@ -23,7 +23,7 @@
- asmlinkage void chacha_block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
- 				      int nrounds);
- asmlinkage void chacha_4block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
--				       int nrounds);
-+				       int nrounds, unsigned int nbytes);
- asmlinkage void hchacha_block_arm(const u32 *state, u32 *out, int nrounds);
- asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds);
- 
-@@ -42,24 +42,24 @@ static void chacha_doneon(u32 *state, u8
- {
- 	u8 buf[CHACHA_BLOCK_SIZE];
- 
--	while (bytes >= CHACHA_BLOCK_SIZE * 4) {
--		chacha_4block_xor_neon(state, dst, src, nrounds);
--		bytes -= CHACHA_BLOCK_SIZE * 4;
--		src += CHACHA_BLOCK_SIZE * 4;
--		dst += CHACHA_BLOCK_SIZE * 4;
--		state[12] += 4;
--	}
--	while (bytes >= CHACHA_BLOCK_SIZE) {
--		chacha_block_xor_neon(state, dst, src, nrounds);
--		bytes -= CHACHA_BLOCK_SIZE;
--		src += CHACHA_BLOCK_SIZE;
--		dst += CHACHA_BLOCK_SIZE;
--		state[12]++;
-+	while (bytes > CHACHA_BLOCK_SIZE) {
-+		unsigned int l = min(bytes, CHACHA_BLOCK_SIZE * 4U);
-+
-+		chacha_4block_xor_neon(state, dst, src, nrounds, l);
-+		bytes -= l;
-+		src += l;
-+		dst += l;
-+		state[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE);
- 	}
- 	if (bytes) {
--		memcpy(buf, src, bytes);
--		chacha_block_xor_neon(state, buf, buf, nrounds);
--		memcpy(dst, buf, bytes);
-+		const u8 *s = src;
-+		u8 *d = dst;
-+
-+		if (bytes != CHACHA_BLOCK_SIZE)
-+			s = d = memcpy(buf, src, bytes);
-+		chacha_block_xor_neon(state, d, s, nrounds);
-+		if (d != dst)
-+			memcpy(dst, buf, bytes);
- 	}
- }
- 
---- a/arch/arm/crypto/chacha-neon-core.S
-+++ b/arch/arm/crypto/chacha-neon-core.S
-@@ -47,6 +47,7 @@
-   */
- 
- #include <linux/linkage.h>
-+#include <asm/cache.h>
- 
- 	.text
- 	.fpu		neon
-@@ -205,7 +206,7 @@ ENDPROC(hchacha_block_neon)
- 
- 	.align		5
- ENTRY(chacha_4block_xor_neon)
--	push		{r4-r5}
-+	push		{r4, lr}
- 	mov		r4, sp			// preserve the stack pointer
- 	sub		ip, sp, #0x20		// allocate a 32 byte buffer
- 	bic		ip, ip, #0x1f		// aligned to 32 bytes
-@@ -229,10 +230,10 @@ ENTRY(chacha_4block_xor_neon)
- 	vld1.32		{q0-q1}, [r0]
- 	vld1.32		{q2-q3}, [ip]
- 
--	adr		r5, .Lctrinc
-+	adr		lr, .Lctrinc
- 	vdup.32		q15, d7[1]
- 	vdup.32		q14, d7[0]
--	vld1.32		{q4}, [r5, :128]
-+	vld1.32		{q4}, [lr, :128]
- 	vdup.32		q13, d6[1]
- 	vdup.32		q12, d6[0]
- 	vdup.32		q11, d5[1]
-@@ -455,7 +456,7 @@ ENTRY(chacha_4block_xor_neon)
- 
- 	// Re-interleave the words in the first two rows of each block (x0..7).
- 	// Also add the counter values 0-3 to x12[0-3].
--	  vld1.32	{q8}, [r5, :128]	// load counter values 0-3
-+	  vld1.32	{q8}, [lr, :128]	// load counter values 0-3
- 	vzip.32		q0, q1			// => (0 1 0 1) (0 1 0 1)
- 	vzip.32		q2, q3			// => (2 3 2 3) (2 3 2 3)
- 	vzip.32		q4, q5			// => (4 5 4 5) (4 5 4 5)
-@@ -493,6 +494,8 @@ ENTRY(chacha_4block_xor_neon)
- 
- 	// Re-interleave the words in the last two rows of each block (x8..15).
- 	vld1.32		{q8-q9}, [sp, :256]
-+	  mov		sp, r4		// restore original stack pointer
-+	  ldr		r4, [r4, #8]	// load number of bytes
- 	vzip.32		q12, q13	// => (12 13 12 13) (12 13 12 13)
- 	vzip.32		q14, q15	// => (14 15 14 15) (14 15 14 15)
- 	vzip.32		q8, q9		// => (8 9 8 9) (8 9 8 9)
-@@ -520,41 +523,121 @@ ENTRY(chacha_4block_xor_neon)
- 	// XOR the rest of the data with the keystream
- 
- 	vld1.8		{q0-q1}, [r2]!
-+	subs		r4, r4, #96
- 	veor		q0, q0, q8
- 	veor		q1, q1, q12
-+	ble		.Lle96
- 	vst1.8		{q0-q1}, [r1]!
- 
- 	vld1.8		{q0-q1}, [r2]!
-+	subs		r4, r4, #32
- 	veor		q0, q0, q2
- 	veor		q1, q1, q6
-+	ble		.Lle128
- 	vst1.8		{q0-q1}, [r1]!
- 
- 	vld1.8		{q0-q1}, [r2]!
-+	subs		r4, r4, #32
- 	veor		q0, q0, q10
- 	veor		q1, q1, q14
-+	ble		.Lle160
- 	vst1.8		{q0-q1}, [r1]!
- 
- 	vld1.8		{q0-q1}, [r2]!
-+	subs		r4, r4, #32
- 	veor		q0, q0, q4
- 	veor		q1, q1, q5
-+	ble		.Lle192
- 	vst1.8		{q0-q1}, [r1]!
- 
- 	vld1.8		{q0-q1}, [r2]!
-+	subs		r4, r4, #32
- 	veor		q0, q0, q9
- 	veor		q1, q1, q13
-+	ble		.Lle224
- 	vst1.8		{q0-q1}, [r1]!
- 
- 	vld1.8		{q0-q1}, [r2]!
-+	subs		r4, r4, #32
- 	veor		q0, q0, q3
- 	veor		q1, q1, q7
-+	blt		.Llt256
-+.Lout:
- 	vst1.8		{q0-q1}, [r1]!
- 
- 	vld1.8		{q0-q1}, [r2]
--	  mov		sp, r4		// restore original stack pointer
- 	veor		q0, q0, q11
- 	veor		q1, q1, q15
- 	vst1.8		{q0-q1}, [r1]
- 
--	pop		{r4-r5}
--	bx		lr
-+	pop		{r4, pc}
-+
-+.Lle192:
-+	vmov		q4, q9
-+	vmov		q5, q13
-+
-+.Lle160:
-+	// nothing to do
-+
-+.Lfinalblock:
-+	// Process the final block if processing less than 4 full blocks.
-+	// Entered with 32 bytes of ChaCha cipher stream in q4-q5, and the
-+	// previous 32 byte output block that still needs to be written at
-+	// [r1] in q0-q1.
-+	beq		.Lfullblock
-+
-+.Lpartialblock:
-+	adr		lr, .Lpermute + 32
-+	add		r2, r2, r4
-+	add		lr, lr, r4
-+	add		r4, r4, r1
-+
-+	vld1.8		{q2-q3}, [lr]
-+	vld1.8		{q6-q7}, [r2]
-+
-+	add		r4, r4, #32
-+
-+	vtbl.8		d4, {q4-q5}, d4
-+	vtbl.8		d5, {q4-q5}, d5
-+	vtbl.8		d6, {q4-q5}, d6
-+	vtbl.8		d7, {q4-q5}, d7
-+
-+	veor		q6, q6, q2
-+	veor		q7, q7, q3
-+
-+	vst1.8		{q6-q7}, [r4]	// overlapping stores
-+	vst1.8		{q0-q1}, [r1]
-+	pop		{r4, pc}
-+
-+.Lfullblock:
-+	vmov		q11, q4
-+	vmov		q15, q5
-+	b		.Lout
-+.Lle96:
-+	vmov		q4, q2
-+	vmov		q5, q6
-+	b		.Lfinalblock
-+.Lle128:
-+	vmov		q4, q10
-+	vmov		q5, q14
-+	b		.Lfinalblock
-+.Lle224:
-+	vmov		q4, q3
-+	vmov		q5, q7
-+	b		.Lfinalblock
-+.Llt256:
-+	vmov		q4, q11
-+	vmov		q5, q15
-+	b		.Lpartialblock
- ENDPROC(chacha_4block_xor_neon)
-+
-+	.align		L1_CACHE_SHIFT
-+.Lpermute:
-+	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
-+	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
-+	.byte		0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17
-+	.byte		0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
-+	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
-+	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
-+	.byte		0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17
-+	.byte		0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
diff --git a/target/linux/generic/backport-5.10/072-crypto-arm-chacha-neon-add-missing-counter-increment.patch b/target/linux/generic/backport-5.10/072-crypto-arm-chacha-neon-add-missing-counter-increment.patch
deleted file mode 100644
index 1e4d2041e594..000000000000
--- a/target/linux/generic/backport-5.10/072-crypto-arm-chacha-neon-add-missing-counter-increment.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 7f63462faf9eab69132bea9abd48c2c05a93145b Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Sun, 13 Dec 2020 15:39:29 +0100
-Subject: [PATCH 2/2] crypto: arm/chacha-neon - add missing counter increment
-
-commit fd16931a2f518a32753920ff20895e5cf04c8ff1 upstream.
-
-Commit 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block
-size multiples") refactored the chacha block handling in the glue code in
-a way that may result in the counter increment to be omitted when calling
-chacha_block_xor_neon() to process a full block. This violates the skcipher
-API, which requires that the output IV is suitable for handling more input
-as long as the preceding input has been presented in round multiples of the
-block size. Also, the same code is exposed via the chacha library interface
-whose callers may actually rely on this increment to occur even for final
-blocks that are smaller than the chacha block size.
-
-So increment the counter after calling chacha_block_xor_neon().
-
-Fixes: 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples")
-Reported-by: Eric Biggers <ebiggers@kernel.org>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/arm/crypto/chacha-glue.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/crypto/chacha-glue.c
-+++ b/arch/arm/crypto/chacha-glue.c
-@@ -60,6 +60,7 @@ static void chacha_doneon(u32 *state, u8
- 		chacha_block_xor_neon(state, d, s, nrounds);
- 		if (d != dst)
- 			memcpy(dst, buf, bytes);
-+		state[12]++;
- 	}
- }
- 
diff --git a/target/linux/generic/backport-5.10/080-wireguard-peer-put-frequently-used-members-above-cac.patch b/target/linux/generic/backport-5.10/080-wireguard-peer-put-frequently-used-members-above-cac.patch
deleted file mode 100644
index 444fd677b465..000000000000
--- a/target/linux/generic/backport-5.10/080-wireguard-peer-put-frequently-used-members-above-cac.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From a13827e9091c07e25cdeec9a402d74a27e2a1111 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Mon, 22 Feb 2021 17:25:46 +0100
-Subject: [PATCH] wireguard: peer: put frequently used members above cache
- lines
-
-commit 5a0598695634a6bb4126818902dd9140cd9df8b6 upstream.
-
-The is_dead boolean is checked for every single packet, while the
-internal_id member is used basically only for pr_debug messages. So it
-makes sense to hoist up is_dead into some space formerly unused by a
-struct hole, while demoting internal_api to below the lowest struct
-cache line.
-
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- drivers/net/wireguard/peer.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireguard/peer.h
-+++ b/drivers/net/wireguard/peer.h
-@@ -39,6 +39,7 @@ struct wg_peer {
- 	struct prev_queue tx_queue, rx_queue;
- 	struct sk_buff_head staged_packet_queue;
- 	int serial_work_cpu;
-+	bool is_dead;
- 	struct noise_keypairs keypairs;
- 	struct endpoint endpoint;
- 	struct dst_cache endpoint_cache;
-@@ -61,9 +62,8 @@ struct wg_peer {
- 	struct rcu_head rcu;
- 	struct list_head peer_list;
- 	struct list_head allowedips_list;
--	u64 internal_id;
- 	struct napi_struct napi;
--	bool is_dead;
-+	u64 internal_id;
- };
- 
- struct wg_peer *wg_peer_create(struct wg_device *wg,
diff --git a/target/linux/generic/backport-5.10/081-net-next-regmap-allow-to-define-reg_update_bits-for-no-bus.patch b/target/linux/generic/backport-5.10/081-net-next-regmap-allow-to-define-reg_update_bits-for-no-bus.patch
deleted file mode 100644
index 6e274acb1f7d..000000000000
--- a/target/linux/generic/backport-5.10/081-net-next-regmap-allow-to-define-reg_update_bits-for-no-bus.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 02d6fdecb9c38de19065f6bed8d5214556fd061d Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 4 Nov 2021 16:00:40 +0100
-Subject: regmap: allow to define reg_update_bits for no bus configuration
-
-Some device requires a special handling for reg_update_bits and can't use
-the normal regmap read write logic. An example is when locking is
-handled by the device and rmw operations requires to do atomic operations.
-Allow to declare a dedicated function in regmap_config for
-reg_update_bits in no bus configuration.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Link: https://lore.kernel.org/r/20211104150040.1260-1-ansuelsmth@gmail.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/base/regmap/regmap.c | 1 +
- include/linux/regmap.h       | 7 +++++++
- 2 files changed, 8 insertions(+)
-
---- a/drivers/base/regmap/regmap.c
-+++ b/drivers/base/regmap/regmap.c
-@@ -842,6 +842,7 @@ struct regmap *__regmap_init(struct devi
- 	if (!bus) {
- 		map->reg_read  = config->reg_read;
- 		map->reg_write = config->reg_write;
-+		map->reg_update_bits = config->reg_update_bits;
- 
- 		map->defer_caching = false;
- 		goto skip_format_initialization;
---- a/include/linux/regmap.h
-+++ b/include/linux/regmap.h
-@@ -289,6 +289,11 @@ typedef void (*regmap_unlock)(void *);
-  *		  read operation on a bus such as SPI, I2C, etc. Most of the
-  *		  devices do not need this.
-  * @reg_write:	  Same as above for writing.
-+ * @reg_update_bits: Optional callback that if filled will be used to perform
-+ *		     all the update_bits(rmw) operation. Should only be provided
-+ *		     if the function require special handling with lock and reg
-+ *		     handling and the operation cannot be represented as a simple
-+ *		     update_bits operation on a bus such as SPI, I2C, etc.
-  * @fast_io:	  Register IO is fast. Use a spinlock instead of a mutex
-  *	     	  to perform locking. This field is ignored if custom lock/unlock
-  *	     	  functions are used (see fields lock/unlock of struct regmap_config).
-@@ -366,6 +371,8 @@ struct regmap_config {
- 
- 	int (*reg_read)(void *context, unsigned int reg, unsigned int *val);
- 	int (*reg_write)(void *context, unsigned int reg, unsigned int val);
-+	int (*reg_update_bits)(void *context, unsigned int reg,
-+			       unsigned int mask, unsigned int val);
- 
- 	bool fast_io;
- 
diff --git a/target/linux/generic/backport-5.10/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch b/target/linux/generic/backport-5.10/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch
deleted file mode 100644
index fafe530ac583..000000000000
--- a/target/linux/generic/backport-5.10/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 6523061868212473f63812a0c477a161742bed42 Mon Sep 17 00:00:00 2001
-From: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Date: Sat, 27 Feb 2021 13:20:24 +0100
-Subject: [PATCH] MIPS: select CPU_MIPS64 for remaining MIPS64 CPUs
-
-The CPU_MIPS64 and CPU_MIPS32 variables are supposed to be able to
-distinguish broadly between 64-bit and 32-bit MIPS CPUs. However, they
-weren't selected by the specialty CPUs, Octeon and Loongson, which meant
-it was possible to hit a weird state of:
-
-    MIPS=y, CONFIG_64BIT=y, CPU_MIPS64=n
-
-This commit rectifies the issue by having CPU_MIPS64 be selected when
-the missing Octeon or Loongson models are selected.
-
-Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: George Cherian <gcherian@marvell.com>
-Cc: Huacai Chen <chenhuacai@kernel.org>
-Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
-Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
----
- arch/mips/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2088,7 +2088,7 @@ config CPU_MIPS32
- config CPU_MIPS64
- 	bool
- 	default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R5 || \
--		     CPU_MIPS64_R6
-+		     CPU_MIPS64_R6 || CPU_LOONGSON64 || CPU_CAVIUM_OCTEON
- 
- #
- # These indicate the revision of the architecture
diff --git a/target/linux/generic/backport-5.10/200-v5.18-tools-resolve_btfids-Build-with-host-flags.patch b/target/linux/generic/backport-5.10/200-v5.18-tools-resolve_btfids-Build-with-host-flags.patch
deleted file mode 100644
index caec8db5d692..000000000000
--- a/target/linux/generic/backport-5.10/200-v5.18-tools-resolve_btfids-Build-with-host-flags.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From cdbc4e3399ed8cdcf234a85f7a2482b622379e82 Mon Sep 17 00:00:00 2001
-From: Connor O'Brien <connoro@google.com>
-Date: Wed, 12 Jan 2022 00:25:03 +0000
-Subject: [PATCH] tools/resolve_btfids: Build with host flags
-
-resolve_btfids is built using $(HOSTCC) and $(HOSTLD) but does not
-pick up the corresponding flags. As a result, host-specific settings
-(such as a sysroot specified via HOSTCFLAGS=--sysroot=..., or a linker
-specified via HOSTLDFLAGS=-fuse-ld=...) will not be respected.
-
-Fix this by setting CFLAGS to KBUILD_HOSTCFLAGS and LDFLAGS to
-KBUILD_HOSTLDFLAGS.
-
-Also pass the cflags through to libbpf via EXTRA_CFLAGS to ensure that
-the host libbpf is built with flags consistent with resolve_btfids.
-
-Signed-off-by: Connor O'Brien <connoro@google.com>
-Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
-Acked-by: Song Liu <songliubraving@fb.com>
-Link: https://lore.kernel.org/bpf/20220112002503.115968-1-connoro@google.com
-(cherry picked from commit 0e3a1c902ffb56e9fe4416f0cd382c97b09ecbf6)
-Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
----
- tools/bpf/resolve_btfids/Makefile | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/tools/bpf/resolve_btfids/Makefile
-+++ b/tools/bpf/resolve_btfids/Makefile
-@@ -23,6 +23,8 @@ CC       = $(HOSTCC)
- LD       = $(HOSTLD)
- ARCH     = $(HOSTARCH)
- RM      ?= rm
-+CFLAGS  := $(KBUILD_HOSTCFLAGS)
-+LDFLAGS := $(KBUILD_HOSTLDFLAGS)
- 
- OUTPUT ?= $(srctree)/tools/bpf/resolve_btfids/
- 
-@@ -45,9 +47,9 @@ $(SUBCMDOBJ): fixdep FORCE | $(OUTPUT)/l
- 	$(Q)$(MAKE) -C $(SUBCMD_SRC) OUTPUT=$(abspath $(dir $@))/ $(abspath $@)
- 
- $(BPFOBJ): $(wildcard $(LIBBPF_SRC)/*.[ch] $(LIBBPF_SRC)/Makefile) | $(OUTPUT)/libbpf
--	$(Q)$(MAKE) $(submake_extras) -C $(LIBBPF_SRC)  OUTPUT=$(abspath $(dir $@))/ $(abspath $@)
-+	$(Q)$(MAKE) $(submake_extras) -C $(LIBBPF_SRC)  OUTPUT=$(abspath $(dir $@))/ EXTRA_CFLAGS="$(CFLAGS)" $(abspath $@)
- 
--CFLAGS := -g \
-+CFLAGS += -g \
-           -I$(srctree)/tools/include \
-           -I$(srctree)/tools/include/uapi \
-           -I$(LIBBPF_SRC) \
diff --git a/target/linux/generic/backport-5.10/311-v5.11-MIPS-zboot-put-appended-dtb-into-a-section.patch b/target/linux/generic/backport-5.10/311-v5.11-MIPS-zboot-put-appended-dtb-into-a-section.patch
deleted file mode 100644
index 3f8808f70245..000000000000
--- a/target/linux/generic/backport-5.10/311-v5.11-MIPS-zboot-put-appended-dtb-into-a-section.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 7d1531c81c0fb4c93bea8dc316043ad0e4d0c270 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Sun, 25 Oct 2020 23:19:40 +0800
-Subject: [PATCH] MIPS: zboot: put appended dtb into a section
-
-This will make a separated section for dtb appear in ELF, and we can
-then use objcopy to patch a dtb into vmlinuz when RAW_APPENDED_DTB
-is set in kernel config.
-
-command to patch a dtb:
-objcopy --set-section-flags=.appended_dtb=alloc,contents \
-        --update-section=.appended_dtb=<target>.dtb vmlinuz vmlinuz-dtb
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
----
- arch/mips/boot/compressed/ld.script | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/arch/mips/boot/compressed/ld.script
-+++ b/arch/mips/boot/compressed/ld.script
-@@ -31,9 +31,12 @@ SECTIONS
- 		CONSTRUCTORS
- 		. = ALIGN(16);
- 	}
--	__appended_dtb = .;
--	/* leave space for appended DTB */
--	. += 0x100000;
-+
-+	.appended_dtb : {
-+		__appended_dtb = .;
-+		/* leave space for appended DTB */
-+		. += 0x100000;
-+	}
- 
- 	_edata = .;
- 	/* End of data section */
diff --git a/target/linux/generic/backport-5.10/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch b/target/linux/generic/backport-5.10/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
deleted file mode 100644
index d300af334258..000000000000
--- a/target/linux/generic/backport-5.10/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Thu, 25 Jan 2018 12:58:55 +0100
-Subject: [PATCH] netfilter: nft_flow_offload: handle netdevice events from
- nf_flow_table
-
-Move the code that deals with device events to the core.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -576,13 +576,41 @@ void nf_flow_table_free(struct nf_flowta
- }
- EXPORT_SYMBOL_GPL(nf_flow_table_free);
- 
-+static int nf_flow_table_netdev_event(struct notifier_block *this,
-+				      unsigned long event, void *ptr)
-+{
-+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+
-+	if (event != NETDEV_DOWN)
-+		return NOTIFY_DONE;
-+
-+	nf_flow_table_cleanup(dev);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block flow_offload_netdev_notifier = {
-+	.notifier_call	= nf_flow_table_netdev_event,
-+};
-+
- static int __init nf_flow_table_module_init(void)
- {
--	return nf_flow_table_offload_init();
-+	int ret;
-+
-+	ret = nf_flow_table_offload_init();
-+	if (ret)
-+		return ret;
-+
-+	ret = register_netdevice_notifier(&flow_offload_netdev_notifier);
-+	if (ret)
-+		nf_flow_table_offload_exit();
-+
-+	return ret;
- }
- 
- static void __exit nf_flow_table_module_exit(void)
- {
-+	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
- 	nf_flow_table_offload_exit();
- }
- 
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -237,47 +237,14 @@ static struct nft_expr_type nft_flow_off
- 	.owner		= THIS_MODULE,
- };
- 
--static int flow_offload_netdev_event(struct notifier_block *this,
--				     unsigned long event, void *ptr)
--{
--	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
--
--	if (event != NETDEV_DOWN)
--		return NOTIFY_DONE;
--
--	nf_flow_table_cleanup(dev);
--
--	return NOTIFY_DONE;
--}
--
--static struct notifier_block flow_offload_netdev_notifier = {
--	.notifier_call	= flow_offload_netdev_event,
--};
--
- static int __init nft_flow_offload_module_init(void)
- {
--	int err;
--
--	err = register_netdevice_notifier(&flow_offload_netdev_notifier);
--	if (err)
--		goto err;
--
--	err = nft_register_expr(&nft_flow_offload_type);
--	if (err < 0)
--		goto register_expr;
--
--	return 0;
--
--register_expr:
--	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
--err:
--	return err;
-+	return nft_register_expr(&nft_flow_offload_type);
- }
- 
- static void __exit nft_flow_offload_module_exit(void)
- {
- 	nft_unregister_expr(&nft_flow_offload_type);
--	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
- }
- 
- module_init(nft_flow_offload_module_init);
diff --git a/target/linux/generic/backport-5.10/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch b/target/linux/generic/backport-5.10/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch
deleted file mode 100644
index 8aded43526b2..000000000000
--- a/target/linux/generic/backport-5.10/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch
+++ /dev/null
@@ -1,324 +0,0 @@
-From 04e9ab75267489224364fa510a88ada83e11c325 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 10 Dec 2020 18:23:52 +0100
-Subject: [PATCH] dt-bindings: mtd: convert "fixed-partitions" to the
- json-schema
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This standardizes its documentation, allows validating with Makefile
-checks and helps writing DTS files.
-
-Noticeable changes:
-1. Dropped "Partitions can be represented by sub-nodes of a flash
-   device." as we also support subpartitions (don't have to be part of
-   flash device node)
-2. Dropped "to Linux" as bindings are meant to be os agnostic.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20201210172352.31632-1-zajec5@gmail.com
-Signed-off-by: Rob Herring <robh@kernel.org>
----
- .../devicetree/bindings/mtd/partition.txt     | 131 +--------------
- .../mtd/partitions/fixed-partitions.yaml      | 152 ++++++++++++++++++
- 2 files changed, 154 insertions(+), 129 deletions(-)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
-
---- a/Documentation/devicetree/bindings/mtd/partition.txt
-+++ b/Documentation/devicetree/bindings/mtd/partition.txt
-@@ -24,137 +24,10 @@ another partitioning method.
- Available bindings are listed in the "partitions" subdirectory.
- 
- 
--Fixed Partitions
--================
--
--Partitions can be represented by sub-nodes of a flash device. This can be used
--on platforms which have strong conventions about which portions of a flash are
--used for what purposes, but which don't use an on-flash partition table such
--as RedBoot.
--
--The partition table should be a subnode of the flash node and should be named
--'partitions'. This node should have the following property:
--- compatible : (required) must be "fixed-partitions"
--Partitions are then defined in subnodes of the partitions node.
-+Deprecated: partitions defined in flash node
-+============================================
- 
- For backwards compatibility partitions as direct subnodes of the flash device are
- supported. This use is discouraged.
- NOTE: also for backwards compatibility, direct subnodes that have a compatible
- string are not considered partitions, as they may be used for other bindings.
--
--#address-cells & #size-cells must both be present in the partitions subnode of the
--flash device. There are two valid values for both:
--<1>: for partitions that require a single 32-bit cell to represent their
--     size/address (aka the value is below 4 GiB)
--<2>: for partitions that require two 32-bit cells to represent their
--     size/address (aka the value is 4 GiB or greater).
--
--Required properties:
--- reg : The partition's offset and size within the flash
--
--Optional properties:
--- label : The label / name for this partition.  If omitted, the label is taken
--  from the node name (excluding the unit address).
--- read-only : This parameter, if present, is a hint to Linux that this
--  partition should only be mounted read-only. This is usually used for flash
--  partitions containing early-boot firmware images or data which should not be
--  clobbered.
--- lock : Do not unlock the partition at initialization time (not supported on
--  all devices)
--- slc-mode: This parameter, if present, allows one to emulate SLC mode on a
--  partition attached to an MLC NAND thus making this partition immune to
--  paired-pages corruptions
--
--Examples:
--
--
--flash@0 {
--	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <1>;
--		#size-cells = <1>;
--
--		partition@0 {
--			label = "u-boot";
--			reg = <0x0000000 0x100000>;
--			read-only;
--		};
--
--		uimage@100000 {
--			reg = <0x0100000 0x200000>;
--		};
--	};
--};
--
--flash@1 {
--	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <1>;
--		#size-cells = <2>;
--
--		/* a 4 GiB partition */
--		partition@0 {
--			label = "filesystem";
--			reg = <0x00000000 0x1 0x00000000>;
--		};
--	};
--};
--
--flash@2 {
--	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <2>;
--		#size-cells = <2>;
--
--		/* an 8 GiB partition */
--		partition@0 {
--			label = "filesystem #1";
--			reg = <0x0 0x00000000 0x2 0x00000000>;
--		};
--
--		/* a 4 GiB partition */
--		partition@200000000 {
--			label = "filesystem #2";
--			reg = <0x2 0x00000000 0x1 0x00000000>;
--		};
--	};
--};
--
--flash@3 {
--	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <1>;
--		#size-cells = <1>;
--
--		partition@0 {
--			label = "bootloader";
--			reg = <0x000000 0x100000>;
--			read-only;
--		};
--
--		firmware@100000 {
--			label = "firmware";
--			reg = <0x100000 0xe00000>;
--			compatible = "brcm,trx";
--		};
--
--		calibration@f00000 {
--			label = "calibration";
--			reg = <0xf00000 0x100000>;
--			compatible = "fixed-partitions";
--			ranges = <0 0xf00000 0x100000>;
--			#address-cells = <1>;
--			#size-cells = <1>;
--
--			partition@0 {
--				label = "wifi0";
--				reg = <0x000000 0x080000>;
--			};
--
--			partition@80000 {
--				label = "wifi1";
--				reg = <0x080000 0x080000>;
--			};
--		};
--	};
--};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
-@@ -0,0 +1,152 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Fixed partitions
-+
-+description: |
-+  This binding can be used on platforms which have strong conventions about
-+  which portions of a flash are used for what purposes, but which don't use an
-+  on-flash partition table such as RedBoot.
-+
-+  The partition table should be a node named "partitions". Partitions are then
-+  defined as subnodes.
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    const: fixed-partitions
-+
-+  "#address-cells": true
-+
-+  "#size-cells": true
-+
-+patternProperties:
-+  "@[0-9a-f]+$":
-+    description: node describing a single flash partition
-+    type: object
-+
-+    properties:
-+      reg:
-+        description: partition's offset and size within the flash
-+        maxItems: 1
-+
-+      label:
-+        description: The label / name for this partition. If omitted, the label
-+          is taken from the node name (excluding the unit address).
-+
-+      read-only:
-+        description: This parameter, if present, is a hint that this partition
-+          should only be mounted read-only. This is usually used for flash
-+          partitions containing early-boot firmware images or data which should
-+          not be clobbered.
-+        type: boolean
-+
-+      lock:
-+        description: Do not unlock the partition at initialization time (not
-+          supported on all devices)
-+        type: boolean
-+
-+      slc-mode:
-+        description: This parameter, if present, allows one to emulate SLC mode
-+          on a partition attached to an MLC NAND thus making this partition
-+          immune to paired-pages corruptions
-+        type: boolean
-+
-+    required:
-+      - reg
-+
-+required:
-+  - "#address-cells"
-+  - "#size-cells"
-+
-+additionalProperties: true
-+
-+examples:
-+  - |
-+    partitions {
-+        compatible = "fixed-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        partition@0 {
-+            label = "u-boot";
-+            reg = <0x0000000 0x100000>;
-+            read-only;
-+        };
-+
-+        uimage@100000 {
-+            reg = <0x0100000 0x200000>;
-+        };
-+    };
-+  - |
-+    partitions {
-+        compatible = "fixed-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <2>;
-+
-+        /* a 4 GiB partition */
-+        partition@0 {
-+            label = "filesystem";
-+            reg = <0x00000000 0x1 0x00000000>;
-+        };
-+    };
-+  - |
-+    partitions {
-+        compatible = "fixed-partitions";
-+        #address-cells = <2>;
-+        #size-cells = <2>;
-+
-+        /* an 8 GiB partition */
-+        partition@0 {
-+            label = "filesystem #1";
-+            reg = <0x0 0x00000000 0x2 0x00000000>;
-+        };
-+
-+        /* a 4 GiB partition */
-+        partition@200000000 {
-+            label = "filesystem #2";
-+            reg = <0x2 0x00000000 0x1 0x00000000>;
-+        };
-+    };
-+  - |
-+    partitions {
-+        compatible = "fixed-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        partition@0 {
-+            label = "bootloader";
-+            reg = <0x000000 0x100000>;
-+            read-only;
-+        };
-+
-+        firmware@100000 {
-+            compatible = "brcm,trx";
-+            label = "firmware";
-+            reg = <0x100000 0xe00000>;
-+        };
-+
-+        calibration@f00000 {
-+            compatible = "fixed-partitions";
-+            label = "calibration";
-+            reg = <0xf00000 0x100000>;
-+            ranges = <0 0xf00000 0x100000>;
-+            #address-cells = <1>;
-+            #size-cells = <1>;
-+
-+            partition@0 {
-+                label = "wifi0";
-+                reg = <0x000000 0x080000>;
-+            };
-+
-+            partition@80000 {
-+                label = "wifi1";
-+                reg = <0x080000 0x080000>;
-+            };
-+        };
-+    };
diff --git a/target/linux/generic/backport-5.10/402-v5.12-0001-dt-bindings-mtd-move-partition-binding-to-its-own-fi.patch b/target/linux/generic/backport-5.10/402-v5.12-0001-dt-bindings-mtd-move-partition-binding-to-its-own-fi.patch
deleted file mode 100644
index f3b1179ecd80..000000000000
--- a/target/linux/generic/backport-5.10/402-v5.12-0001-dt-bindings-mtd-move-partition-binding-to-its-own-fi.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 6418522022c706fd867b00b2571edba48b8fa8c7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 23:04:25 +0100
-Subject: [PATCH] dt-bindings: mtd: move partition binding to its own file
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Single partition binding is quite common and may be:
-1. Used by multiple parsers
-2. Extended for more specific cases
-
-Move it to separated file to avoid code duplication.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Richard Weinberger <richard@nod.at>
----
- .../mtd/partitions/fixed-partitions.yaml      | 33 +------------
- .../bindings/mtd/partitions/partition.yaml    | 47 +++++++++++++++++++
- 2 files changed, 48 insertions(+), 32 deletions(-)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/partition.yaml
-
---- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
-+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
-@@ -27,38 +27,7 @@ properties:
- 
- patternProperties:
-   "@[0-9a-f]+$":
--    description: node describing a single flash partition
--    type: object
--
--    properties:
--      reg:
--        description: partition's offset and size within the flash
--        maxItems: 1
--
--      label:
--        description: The label / name for this partition. If omitted, the label
--          is taken from the node name (excluding the unit address).
--
--      read-only:
--        description: This parameter, if present, is a hint that this partition
--          should only be mounted read-only. This is usually used for flash
--          partitions containing early-boot firmware images or data which should
--          not be clobbered.
--        type: boolean
--
--      lock:
--        description: Do not unlock the partition at initialization time (not
--          supported on all devices)
--        type: boolean
--
--      slc-mode:
--        description: This parameter, if present, allows one to emulate SLC mode
--          on a partition attached to an MLC NAND thus making this partition
--          immune to paired-pages corruptions
--        type: boolean
--
--    required:
--      - reg
-+    $ref: "partition.yaml#"
- 
- required:
-   - "#address-cells"
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
-@@ -0,0 +1,47 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/partitions/partition.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Partition
-+
-+description: |
-+  This binding describes a single flash partition. Each partition must have its
-+  relative offset and size specified. Depending on partition function extra
-+  properties can be used.
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  reg:
-+    description: partition's offset and size within the flash
-+    maxItems: 1
-+
-+  label:
-+    description: The label / name for this partition. If omitted, the label
-+      is taken from the node name (excluding the unit address).
-+
-+  read-only:
-+    description: This parameter, if present, is a hint that this partition
-+      should only be mounted read-only. This is usually used for flash
-+      partitions containing early-boot firmware images or data which should
-+      not be clobbered.
-+    type: boolean
-+
-+  lock:
-+    description: Do not unlock the partition at initialization time (not
-+      supported on all devices)
-+    type: boolean
-+
-+  slc-mode:
-+    description: This parameter, if present, allows one to emulate SLC mode
-+      on a partition attached to an MLC NAND thus making this partition
-+      immune to paired-pages corruptions
-+    type: boolean
-+
-+required:
-+  - reg
-+
-+additionalProperties: true
diff --git a/target/linux/generic/backport-5.10/402-v5.12-0002-dt-bindings-mtd-add-binding-for-BCM4908-partitions.patch b/target/linux/generic/backport-5.10/402-v5.12-0002-dt-bindings-mtd-add-binding-for-BCM4908-partitions.patch
deleted file mode 100644
index 8576c7d78d22..000000000000
--- a/target/linux/generic/backport-5.10/402-v5.12-0002-dt-bindings-mtd-add-binding-for-BCM4908-partitions.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 6e9dff6fe3fbc452f16566e4a7e293b0decefdba Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 23:04:26 +0100
-Subject: [PATCH] dt-bindings: mtd: add binding for BCM4908 partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 uses fixed partitions layout but function of some partitions may
-vary. Some devices use multiple firmware partitions and those partitions
-should be marked to let system discover their purpose.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Richard Weinberger <richard@nod.at>
----
- .../partitions/brcm,bcm4908-partitions.yaml   | 70 +++++++++++++++++++
- 1 file changed, 70 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
-@@ -0,0 +1,70 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/partitions/brcm,bcm4908-partitions.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom BCM4908 partitioning
-+
-+description: |
-+  Broadcom BCM4908 CFE bootloader supports two firmware partitions. One is used
-+  for regular booting, the other is treated as fallback.
-+
-+  This binding allows defining all fixed partitions and marking those containing
-+  firmware. System can use that information e.g. for booting or flashing
-+  purposes.
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    const: brcm,bcm4908-partitions
-+
-+  "#address-cells":
-+    enum: [ 1, 2 ]
-+
-+  "#size-cells":
-+    enum: [ 1, 2 ]
-+
-+patternProperties:
-+  "^partition@[0-9a-f]+$":
-+    $ref: "partition.yaml#"
-+    properties:
-+      compatible:
-+        const: brcm,bcm4908-firmware
-+    unevaluatedProperties: false
-+
-+required:
-+  - "#address-cells"
-+  - "#size-cells"
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    partitions {
-+        compatible = "brcm,bcm4908-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        partition@0 {
-+            label = "cferom";
-+            reg = <0x0 0x100000>;
-+        };
-+
-+        partition@100000 {
-+            compatible = "brcm,bcm4908-firmware";
-+            reg = <0x100000 0xf00000>;
-+        };
-+
-+        partition@1000000 {
-+            compatible = "brcm,bcm4908-firmware";
-+            reg = <0x1000000 0xf00000>;
-+        };
-+
-+        partition@1f00000 {
-+            label = "calibration";
-+            reg = <0x1f00000 0x100000>;
-+        };
-+    };
diff --git a/target/linux/generic/backport-5.10/403-v5.13-mtd-parsers-ofpart-support-BCM4908-fixed-partitions.patch b/target/linux/generic/backport-5.10/403-v5.13-mtd-parsers-ofpart-support-BCM4908-fixed-partitions.patch
deleted file mode 100644
index d3891228e24e..000000000000
--- a/target/linux/generic/backport-5.10/403-v5.13-mtd-parsers-ofpart-support-BCM4908-fixed-partitions.patch
+++ /dev/null
@@ -1,654 +0,0 @@
-From afbef8efb591792579c633a7c545f914c6165f82 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Feb 2021 23:04:27 +0100
-Subject: [PATCH] mtd: parsers: ofpart: support BCM4908 fixed partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some devices use fixed partitioning with some partitions requiring some
-extra logic. E.g. BCM4908 may have multiple firmware partitions but
-detecting currently used one requires checking bootloader parameters.
-
-To support such cases without duplicating a lot of code (without copying
-most of the ofpart.c code) support for post-parsing callback was added.
-
-BCM4908 support in ofpart can be enabled using config option and results
-in compiling & executing a specific callback. It simply reads offset of
-currently used firmware partition from the DT. Bootloader specifies it
-using the "brcm_blparms" property.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/mtd/parsers/Kconfig                   |  9 +++
- drivers/mtd/parsers/Makefile                  |  2 +
- drivers/mtd/parsers/ofpart_bcm4908.c          | 64 +++++++++++++++++++
- drivers/mtd/parsers/ofpart_bcm4908.h          | 15 +++++
- .../mtd/parsers/{ofpart.c => ofpart_core.c}   | 28 +++++++-
- 5 files changed, 116 insertions(+), 2 deletions(-)
- create mode 100644 drivers/mtd/parsers/ofpart_bcm4908.c
- create mode 100644 drivers/mtd/parsers/ofpart_bcm4908.h
- rename drivers/mtd/parsers/{ofpart.c => ofpart_core.c} (88%)
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -67,6 +67,15 @@ config MTD_OF_PARTS
- 	  flash memory node, as described in
- 	  Documentation/devicetree/bindings/mtd/partition.txt.
- 
-+config MTD_OF_PARTS_BCM4908
-+	bool "BCM4908 partitioning support"
-+	depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
-+	default ARCH_BCM4908
-+	help
-+	  This provides partitions parser for BCM4908 family devices
-+	  that can have multiple "firmware" partitions. It takes care of
-+	  finding currently used one and backup ones.
-+
- config MTD_PARSER_IMAGETAG
- 	tristate "Parser for BCM963XX Image Tag format partitions"
- 	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -4,6 +4,8 @@ obj-$(CONFIG_MTD_BCM47XX_PARTS)		+= bcm4
- obj-$(CONFIG_MTD_BCM63XX_PARTS)		+= bcm63xxpart.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS)		+= cmdlinepart.o
- obj-$(CONFIG_MTD_OF_PARTS)		+= ofpart.o
-+ofpart-y				+= ofpart_core.o
-+ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908)	+= ofpart_bcm4908.o
- obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
- obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
- obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
---- /dev/null
-+++ b/drivers/mtd/parsers/ofpart_bcm4908.c
-@@ -0,0 +1,64 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/of.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include "ofpart_bcm4908.h"
-+
-+#define BLPARAMS_FW_OFFSET		"NAND_RFS_OFS"
-+
-+static long long bcm4908_partitions_fw_offset(void)
-+{
-+	struct device_node *root;
-+	struct property *prop;
-+	const char *s;
-+
-+	root = of_find_node_by_path("/");
-+	if (!root)
-+		return -ENOENT;
-+
-+	of_property_for_each_string(root, "brcm_blparms", prop, s) {
-+		size_t len = strlen(BLPARAMS_FW_OFFSET);
-+		unsigned long offset;
-+		int err;
-+
-+		if (strncmp(s, BLPARAMS_FW_OFFSET, len) || s[len] != '=')
-+			continue;
-+
-+		err = kstrtoul(s + len + 1, 0, &offset);
-+		if (err) {
-+			pr_err("failed to parse %s\n", s + len + 1);
-+			return err;
-+		}
-+
-+		return offset << 10;
-+	}
-+
-+	return -ENOENT;
-+}
-+
-+int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts)
-+{
-+	long long fw_offset;
-+	int i;
-+
-+	fw_offset = bcm4908_partitions_fw_offset();
-+
-+	for (i = 0; i < nr_parts; i++) {
-+		if (of_device_is_compatible(parts[i].of_node, "brcm,bcm4908-firmware")) {
-+			if (fw_offset < 0 || parts[i].offset == fw_offset)
-+				parts[i].name = "firmware";
-+			else
-+				parts[i].name = "backup";
-+		}
-+	}
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/mtd/parsers/ofpart_bcm4908.h
-@@ -0,0 +1,15 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+#ifndef __BCM4908_PARTITIONS_H
-+#define __BCM4908_PARTITIONS_H
-+
-+#ifdef CONFIG_MTD_OF_PARTS_BCM4908
-+int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
-+#else
-+static inline int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts,
-+						int nr_parts)
-+{
-+	return -EOPNOTSUPP;
-+}
-+#endif
-+
-+#endif
---- a/drivers/mtd/parsers/ofpart.c
-+++ /dev/null
-@@ -1,239 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-or-later
--/*
-- * Flash partitions described by the OF (or flattened) device tree
-- *
-- * Copyright © 2006 MontaVista Software Inc.
-- * Author: Vitaly Wool <vwool@ru.mvista.com>
-- *
-- * Revised to handle newer style flash binding by:
-- *   Copyright © 2007 David Gibson, IBM Corporation.
-- */
--
--#include <linux/module.h>
--#include <linux/init.h>
--#include <linux/of.h>
--#include <linux/mtd/mtd.h>
--#include <linux/slab.h>
--#include <linux/mtd/partitions.h>
--
--static bool node_has_compatible(struct device_node *pp)
--{
--	return of_get_property(pp, "compatible", NULL);
--}
--
--static int parse_fixed_partitions(struct mtd_info *master,
--				  const struct mtd_partition **pparts,
--				  struct mtd_part_parser_data *data)
--{
--	struct mtd_partition *parts;
--	struct device_node *mtd_node;
--	struct device_node *ofpart_node;
--	const char *partname;
--	struct device_node *pp;
--	int nr_parts, i, ret = 0;
--	bool dedicated = true;
--
--
--	/* Pull of_node from the master device node */
--	mtd_node = mtd_get_of_node(master);
--	if (!mtd_node)
--		return 0;
--
--	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
--	if (!ofpart_node) {
--		/*
--		 * We might get here even when ofpart isn't used at all (e.g.,
--		 * when using another parser), so don't be louder than
--		 * KERN_DEBUG
--		 */
--		pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n",
--			 master->name, mtd_node);
--		ofpart_node = mtd_node;
--		dedicated = false;
--	} else if (!of_device_is_compatible(ofpart_node, "fixed-partitions")) {
--		/* The 'partitions' subnode might be used by another parser */
--		return 0;
--	}
--
--	/* First count the subnodes */
--	nr_parts = 0;
--	for_each_child_of_node(ofpart_node,  pp) {
--		if (!dedicated && node_has_compatible(pp))
--			continue;
--
--		nr_parts++;
--	}
--
--	if (nr_parts == 0)
--		return 0;
--
--	parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL);
--	if (!parts)
--		return -ENOMEM;
--
--	i = 0;
--	for_each_child_of_node(ofpart_node,  pp) {
--		const __be32 *reg;
--		int len;
--		int a_cells, s_cells;
--
--		if (!dedicated && node_has_compatible(pp))
--			continue;
--
--		reg = of_get_property(pp, "reg", &len);
--		if (!reg) {
--			if (dedicated) {
--				pr_debug("%s: ofpart partition %pOF (%pOF) missing reg property.\n",
--					 master->name, pp,
--					 mtd_node);
--				goto ofpart_fail;
--			} else {
--				nr_parts--;
--				continue;
--			}
--		}
--
--		a_cells = of_n_addr_cells(pp);
--		s_cells = of_n_size_cells(pp);
--		if (len / 4 != a_cells + s_cells) {
--			pr_debug("%s: ofpart partition %pOF (%pOF) error parsing reg property.\n",
--				 master->name, pp,
--				 mtd_node);
--			goto ofpart_fail;
--		}
--
--		parts[i].offset = of_read_number(reg, a_cells);
--		parts[i].size = of_read_number(reg + a_cells, s_cells);
--		parts[i].of_node = pp;
--
--		partname = of_get_property(pp, "label", &len);
--		if (!partname)
--			partname = of_get_property(pp, "name", &len);
--		parts[i].name = partname;
--
--		if (of_get_property(pp, "read-only", &len))
--			parts[i].mask_flags |= MTD_WRITEABLE;
--
--		if (of_get_property(pp, "lock", &len))
--			parts[i].mask_flags |= MTD_POWERUP_LOCK;
--
--		if (of_property_read_bool(pp, "slc-mode"))
--			parts[i].add_flags |= MTD_SLC_ON_MLC_EMULATION;
--
--		i++;
--	}
--
--	if (!nr_parts)
--		goto ofpart_none;
--
--	*pparts = parts;
--	return nr_parts;
--
--ofpart_fail:
--	pr_err("%s: error parsing ofpart partition %pOF (%pOF)\n",
--	       master->name, pp, mtd_node);
--	ret = -EINVAL;
--ofpart_none:
--	of_node_put(pp);
--	kfree(parts);
--	return ret;
--}
--
--static const struct of_device_id parse_ofpart_match_table[] = {
--	{ .compatible = "fixed-partitions" },
--	{},
--};
--MODULE_DEVICE_TABLE(of, parse_ofpart_match_table);
--
--static struct mtd_part_parser ofpart_parser = {
--	.parse_fn = parse_fixed_partitions,
--	.name = "fixed-partitions",
--	.of_match_table = parse_ofpart_match_table,
--};
--
--static int parse_ofoldpart_partitions(struct mtd_info *master,
--				      const struct mtd_partition **pparts,
--				      struct mtd_part_parser_data *data)
--{
--	struct mtd_partition *parts;
--	struct device_node *dp;
--	int i, plen, nr_parts;
--	const struct {
--		__be32 offset, len;
--	} *part;
--	const char *names;
--
--	/* Pull of_node from the master device node */
--	dp = mtd_get_of_node(master);
--	if (!dp)
--		return 0;
--
--	part = of_get_property(dp, "partitions", &plen);
--	if (!part)
--		return 0; /* No partitions found */
--
--	pr_warn("Device tree uses obsolete partition map binding: %pOF\n", dp);
--
--	nr_parts = plen / sizeof(part[0]);
--
--	parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL);
--	if (!parts)
--		return -ENOMEM;
--
--	names = of_get_property(dp, "partition-names", &plen);
--
--	for (i = 0; i < nr_parts; i++) {
--		parts[i].offset = be32_to_cpu(part->offset);
--		parts[i].size   = be32_to_cpu(part->len) & ~1;
--		/* bit 0 set signifies read only partition */
--		if (be32_to_cpu(part->len) & 1)
--			parts[i].mask_flags = MTD_WRITEABLE;
--
--		if (names && (plen > 0)) {
--			int len = strlen(names) + 1;
--
--			parts[i].name = names;
--			plen -= len;
--			names += len;
--		} else {
--			parts[i].name = "unnamed";
--		}
--
--		part++;
--	}
--
--	*pparts = parts;
--	return nr_parts;
--}
--
--static struct mtd_part_parser ofoldpart_parser = {
--	.parse_fn = parse_ofoldpart_partitions,
--	.name = "ofoldpart",
--};
--
--static int __init ofpart_parser_init(void)
--{
--	register_mtd_parser(&ofpart_parser);
--	register_mtd_parser(&ofoldpart_parser);
--	return 0;
--}
--
--static void __exit ofpart_parser_exit(void)
--{
--	deregister_mtd_parser(&ofpart_parser);
--	deregister_mtd_parser(&ofoldpart_parser);
--}
--
--module_init(ofpart_parser_init);
--module_exit(ofpart_parser_exit);
--
--MODULE_LICENSE("GPL");
--MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree");
--MODULE_AUTHOR("Vitaly Wool, David Gibson");
--/*
-- * When MTD core cannot find the requested parser, it tries to load the module
-- * with the same name. Since we provide the ofoldpart parser, we should have
-- * the corresponding alias.
-- */
--MODULE_ALIAS("fixed-partitions");
--MODULE_ALIAS("ofoldpart");
---- /dev/null
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -0,0 +1,263 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * Flash partitions described by the OF (or flattened) device tree
-+ *
-+ * Copyright © 2006 MontaVista Software Inc.
-+ * Author: Vitaly Wool <vwool@ru.mvista.com>
-+ *
-+ * Revised to handle newer style flash binding by:
-+ *   Copyright © 2007 David Gibson, IBM Corporation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/of.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include "ofpart_bcm4908.h"
-+
-+struct fixed_partitions_quirks {
-+	int (*post_parse)(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
-+};
-+
-+struct fixed_partitions_quirks bcm4908_partitions_quirks = {
-+	.post_parse = bcm4908_partitions_post_parse,
-+};
-+
-+static const struct of_device_id parse_ofpart_match_table[];
-+
-+static bool node_has_compatible(struct device_node *pp)
-+{
-+	return of_get_property(pp, "compatible", NULL);
-+}
-+
-+static int parse_fixed_partitions(struct mtd_info *master,
-+				  const struct mtd_partition **pparts,
-+				  struct mtd_part_parser_data *data)
-+{
-+	const struct fixed_partitions_quirks *quirks;
-+	const struct of_device_id *of_id;
-+	struct mtd_partition *parts;
-+	struct device_node *mtd_node;
-+	struct device_node *ofpart_node;
-+	const char *partname;
-+	struct device_node *pp;
-+	int nr_parts, i, ret = 0;
-+	bool dedicated = true;
-+
-+	/* Pull of_node from the master device node */
-+	mtd_node = mtd_get_of_node(master);
-+	if (!mtd_node)
-+		return 0;
-+
-+	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
-+	if (!ofpart_node) {
-+		/*
-+		 * We might get here even when ofpart isn't used at all (e.g.,
-+		 * when using another parser), so don't be louder than
-+		 * KERN_DEBUG
-+		 */
-+		pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n",
-+			 master->name, mtd_node);
-+		ofpart_node = mtd_node;
-+		dedicated = false;
-+	}
-+
-+	of_id = of_match_node(parse_ofpart_match_table, ofpart_node);
-+	if (dedicated && !of_id) {
-+		/* The 'partitions' subnode might be used by another parser */
-+		return 0;
-+	}
-+
-+	quirks = of_id ? of_id->data : NULL;
-+
-+	/* First count the subnodes */
-+	nr_parts = 0;
-+	for_each_child_of_node(ofpart_node,  pp) {
-+		if (!dedicated && node_has_compatible(pp))
-+			continue;
-+
-+		nr_parts++;
-+	}
-+
-+	if (nr_parts == 0)
-+		return 0;
-+
-+	parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL);
-+	if (!parts)
-+		return -ENOMEM;
-+
-+	i = 0;
-+	for_each_child_of_node(ofpart_node,  pp) {
-+		const __be32 *reg;
-+		int len;
-+		int a_cells, s_cells;
-+
-+		if (!dedicated && node_has_compatible(pp))
-+			continue;
-+
-+		reg = of_get_property(pp, "reg", &len);
-+		if (!reg) {
-+			if (dedicated) {
-+				pr_debug("%s: ofpart partition %pOF (%pOF) missing reg property.\n",
-+					 master->name, pp,
-+					 mtd_node);
-+				goto ofpart_fail;
-+			} else {
-+				nr_parts--;
-+				continue;
-+			}
-+		}
-+
-+		a_cells = of_n_addr_cells(pp);
-+		s_cells = of_n_size_cells(pp);
-+		if (len / 4 != a_cells + s_cells) {
-+			pr_debug("%s: ofpart partition %pOF (%pOF) error parsing reg property.\n",
-+				 master->name, pp,
-+				 mtd_node);
-+			goto ofpart_fail;
-+		}
-+
-+		parts[i].offset = of_read_number(reg, a_cells);
-+		parts[i].size = of_read_number(reg + a_cells, s_cells);
-+		parts[i].of_node = pp;
-+
-+		partname = of_get_property(pp, "label", &len);
-+		if (!partname)
-+			partname = of_get_property(pp, "name", &len);
-+		parts[i].name = partname;
-+
-+		if (of_get_property(pp, "read-only", &len))
-+			parts[i].mask_flags |= MTD_WRITEABLE;
-+
-+		if (of_get_property(pp, "lock", &len))
-+			parts[i].mask_flags |= MTD_POWERUP_LOCK;
-+
-+		if (of_property_read_bool(pp, "slc-mode"))
-+			parts[i].add_flags |= MTD_SLC_ON_MLC_EMULATION;
-+
-+		i++;
-+	}
-+
-+	if (!nr_parts)
-+		goto ofpart_none;
-+
-+	if (quirks && quirks->post_parse)
-+		quirks->post_parse(master, parts, nr_parts);
-+
-+	*pparts = parts;
-+	return nr_parts;
-+
-+ofpart_fail:
-+	pr_err("%s: error parsing ofpart partition %pOF (%pOF)\n",
-+	       master->name, pp, mtd_node);
-+	ret = -EINVAL;
-+ofpart_none:
-+	of_node_put(pp);
-+	kfree(parts);
-+	return ret;
-+}
-+
-+static const struct of_device_id parse_ofpart_match_table[] = {
-+	/* Generic */
-+	{ .compatible = "fixed-partitions" },
-+	/* Customized */
-+	{ .compatible = "brcm,bcm4908-partitions", .data = &bcm4908_partitions_quirks, },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, parse_ofpart_match_table);
-+
-+static struct mtd_part_parser ofpart_parser = {
-+	.parse_fn = parse_fixed_partitions,
-+	.name = "fixed-partitions",
-+	.of_match_table = parse_ofpart_match_table,
-+};
-+
-+static int parse_ofoldpart_partitions(struct mtd_info *master,
-+				      const struct mtd_partition **pparts,
-+				      struct mtd_part_parser_data *data)
-+{
-+	struct mtd_partition *parts;
-+	struct device_node *dp;
-+	int i, plen, nr_parts;
-+	const struct {
-+		__be32 offset, len;
-+	} *part;
-+	const char *names;
-+
-+	/* Pull of_node from the master device node */
-+	dp = mtd_get_of_node(master);
-+	if (!dp)
-+		return 0;
-+
-+	part = of_get_property(dp, "partitions", &plen);
-+	if (!part)
-+		return 0; /* No partitions found */
-+
-+	pr_warn("Device tree uses obsolete partition map binding: %pOF\n", dp);
-+
-+	nr_parts = plen / sizeof(part[0]);
-+
-+	parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL);
-+	if (!parts)
-+		return -ENOMEM;
-+
-+	names = of_get_property(dp, "partition-names", &plen);
-+
-+	for (i = 0; i < nr_parts; i++) {
-+		parts[i].offset = be32_to_cpu(part->offset);
-+		parts[i].size   = be32_to_cpu(part->len) & ~1;
-+		/* bit 0 set signifies read only partition */
-+		if (be32_to_cpu(part->len) & 1)
-+			parts[i].mask_flags = MTD_WRITEABLE;
-+
-+		if (names && (plen > 0)) {
-+			int len = strlen(names) + 1;
-+
-+			parts[i].name = names;
-+			plen -= len;
-+			names += len;
-+		} else {
-+			parts[i].name = "unnamed";
-+		}
-+
-+		part++;
-+	}
-+
-+	*pparts = parts;
-+	return nr_parts;
-+}
-+
-+static struct mtd_part_parser ofoldpart_parser = {
-+	.parse_fn = parse_ofoldpart_partitions,
-+	.name = "ofoldpart",
-+};
-+
-+static int __init ofpart_parser_init(void)
-+{
-+	register_mtd_parser(&ofpart_parser);
-+	register_mtd_parser(&ofoldpart_parser);
-+	return 0;
-+}
-+
-+static void __exit ofpart_parser_exit(void)
-+{
-+	deregister_mtd_parser(&ofpart_parser);
-+	deregister_mtd_parser(&ofoldpart_parser);
-+}
-+
-+module_init(ofpart_parser_init);
-+module_exit(ofpart_parser_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree");
-+MODULE_AUTHOR("Vitaly Wool, David Gibson");
-+/*
-+ * When MTD core cannot find the requested parser, it tries to load the module
-+ * with the same name. Since we provide the ofoldpart parser, we should have
-+ * the corresponding alias.
-+ */
-+MODULE_ALIAS("fixed-partitions");
-+MODULE_ALIAS("ofoldpart");
diff --git a/target/linux/generic/backport-5.10/404-v5.13-mtd-parsers-ofpart-limit-parsing-of-deprecated-DT-sy.patch b/target/linux/generic/backport-5.10/404-v5.13-mtd-parsers-ofpart-limit-parsing-of-deprecated-DT-sy.patch
deleted file mode 100644
index 55a91d7680b4..000000000000
--- a/target/linux/generic/backport-5.10/404-v5.13-mtd-parsers-ofpart-limit-parsing-of-deprecated-DT-sy.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 2d751203aacf86a1b301a188d8551c7da91043ab Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 2 Mar 2021 20:00:12 +0100
-Subject: [PATCH] mtd: parsers: ofpart: limit parsing of deprecated DT syntax
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-For backward compatibility ofpart still supports the old syntax like:
-spi-flash@0 {
-	compatible = "jedec,spi-nor";
-	reg = <0x0>;
-
-	partition@0 {
-		label = "bootloader";
-		reg = <0x0 0x100000>;
-	};
-};
-(without "partitions" subnode).
-
-There is no reason however to support nested partitions without a clear
-"compatible" string like:
-partitions {
-	compatible = "fixed-partitions";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	partition@0 {
-		label = "bootloader";
-		reg = <0x0 0x100000>;
-
-		partition@0 {
-			label = "config";
-			reg = <0x80000 0x80000>;
-		};
-	};
-};
-(we never officially supported or documented that).
-
-Make sure ofpart doesn't attempt to parse above.
-
-Cc: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210302190012.1255-1-zajec5@gmail.com
----
- drivers/mtd/parsers/ofpart_core.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -53,7 +53,7 @@ static int parse_fixed_partitions(struct
- 		return 0;
- 
- 	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
--	if (!ofpart_node) {
-+	if (!ofpart_node && !master->parent) {
- 		/*
- 		 * We might get here even when ofpart isn't used at all (e.g.,
- 		 * when using another parser), so don't be louder than
-@@ -64,6 +64,8 @@ static int parse_fixed_partitions(struct
- 		ofpart_node = mtd_node;
- 		dedicated = false;
- 	}
-+	if (!ofpart_node)
-+		return 0;
- 
- 	of_id = of_match_node(parse_ofpart_match_table, ofpart_node);
- 	if (dedicated && !of_id) {
diff --git a/target/linux/generic/backport-5.10/405-v5.13-mtd-parsers-ofpart-make-symbol-bcm4908_partitions_qu.patch b/target/linux/generic/backport-5.10/405-v5.13-mtd-parsers-ofpart-make-symbol-bcm4908_partitions_qu.patch
deleted file mode 100644
index f1b778a6e1c6..000000000000
--- a/target/linux/generic/backport-5.10/405-v5.13-mtd-parsers-ofpart-make-symbol-bcm4908_partitions_qu.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From b87b6d2d6f540e29c3f98e1572d64e560d73d6c1 Mon Sep 17 00:00:00 2001
-From: Wei Yongjun <weiyongjun1@huawei.com>
-Date: Thu, 4 Mar 2021 06:46:00 +0000
-Subject: [PATCH] mtd: parsers: ofpart: make symbol 'bcm4908_partitions_quirks'
- static
-
-The sparse tool complains as follows:
-
-drivers/mtd/parsers/ofpart_core.c:25:32: warning:
- symbol 'bcm4908_partitions_quirks' was not declared. Should it be static?
-
-This symbol is not used outside of ofpart_core.c, so this
-commit marks it static.
-
-Fixes: 457da931b608 ("mtd: parsers: ofpart: support BCM4908 fixed partitions")
-Reported-by: Hulk Robot <hulkci@huawei.com>
-Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210304064600.3279138-1-weiyongjun1@huawei.com
----
- drivers/mtd/parsers/ofpart_core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -22,7 +22,7 @@ struct fixed_partitions_quirks {
- 	int (*post_parse)(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
- };
- 
--struct fixed_partitions_quirks bcm4908_partitions_quirks = {
-+static struct fixed_partitions_quirks bcm4908_partitions_quirks = {
- 	.post_parse = bcm4908_partitions_post_parse,
- };
- 
diff --git a/target/linux/generic/backport-5.10/406-v5.13-0001-mtd-core-add-nvmem-cells-compatible-to-parse-mtd-as-.patch b/target/linux/generic/backport-5.10/406-v5.13-0001-mtd-core-add-nvmem-cells-compatible-to-parse-mtd-as-.patch
deleted file mode 100644
index 28335cb71f08..000000000000
--- a/target/linux/generic/backport-5.10/406-v5.13-0001-mtd-core-add-nvmem-cells-compatible-to-parse-mtd-as-.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From a5d83d6e2bc747b13f347962d4b335d70b23559b Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 12 Mar 2021 07:28:19 +0100
-Subject: [PATCH] mtd: core: add nvmem-cells compatible to parse mtd as nvmem
- cells
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Partitions that contains the nvmem-cells compatible will register
-their direct subonodes as nvmem cells and the node will be treated as a
-nvmem provider.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Tested-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/mtd/mtdcore.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -531,6 +531,7 @@ static int mtd_nvmem_reg_read(void *priv
- 
- static int mtd_nvmem_add(struct mtd_info *mtd)
- {
-+	struct device_node *node = mtd_get_of_node(mtd);
- 	struct nvmem_config config = {};
- 
- 	config.id = -1;
-@@ -543,7 +544,7 @@ static int mtd_nvmem_add(struct mtd_info
- 	config.stride = 1;
- 	config.read_only = true;
- 	config.root_only = true;
--	config.no_of_node = true;
-+	config.no_of_node = !of_device_is_compatible(node, "nvmem-cells");
- 	config.priv = mtd;
- 
- 	mtd->nvmem = nvmem_register(&config);
diff --git a/target/linux/generic/backport-5.10/406-v5.13-0002-dt-bindings-nvmem-drop-nodename-restriction.patch b/target/linux/generic/backport-5.10/406-v5.13-0002-dt-bindings-nvmem-drop-nodename-restriction.patch
deleted file mode 100644
index 14ea3f6b8c69..000000000000
--- a/target/linux/generic/backport-5.10/406-v5.13-0002-dt-bindings-nvmem-drop-nodename-restriction.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 42645976c3289b03a12f1bd2bc131fd98fc27170 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 12 Mar 2021 07:28:20 +0100
-Subject: [PATCH] devicetree: nvmem: nvmem: drop $nodename restriction
-
-Drop $nodename restriction as now mtd partition can also be used as
-nvmem provider.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- Documentation/devicetree/bindings/nvmem/nvmem.yaml | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
-+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
-@@ -20,9 +20,6 @@ description: |
-   storage device.
- 
- properties:
--  $nodename:
--    pattern: "^(eeprom|efuse|nvram)(@.*|-[0-9a-f])*$"
--
-   "#address-cells":
-     const: 1
- 
diff --git a/target/linux/generic/backport-5.10/406-v5.13-0003-dt-bindings-mtd-Document-use-of-nvmem-cells-compatib.patch b/target/linux/generic/backport-5.10/406-v5.13-0003-dt-bindings-mtd-Document-use-of-nvmem-cells-compatib.patch
deleted file mode 100644
index 0eb4c637cf44..000000000000
--- a/target/linux/generic/backport-5.10/406-v5.13-0003-dt-bindings-mtd-Document-use-of-nvmem-cells-compatib.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From 377aa0135dc8489312edd3184d143ce3a89ff7ee Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 12 Mar 2021 07:28:21 +0100
-Subject: [PATCH] dt-bindings: mtd: Document use of nvmem-cells compatible
-
-Document nvmem-cells compatible used to treat mtd partitions as a
-nvmem provider.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
----
- .../bindings/mtd/partitions/nvmem-cells.yaml  | 99 +++++++++++++++++++
- 1 file changed, 99 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
-@@ -0,0 +1,99 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/partitions/nvmem-cells.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Nvmem cells
-+
-+description: |
-+  Any partition containing the compatible "nvmem-cells" will register as a
-+  nvmem provider.
-+  Each direct subnodes represents a nvmem cell following the nvmem binding.
-+  Nvmem binding to declare nvmem-cells can be found in:
-+  Documentation/devicetree/bindings/nvmem/nvmem.yaml
-+
-+maintainers:
-+  - Ansuel Smith <ansuelsmth@gmail.com>
-+
-+allOf:
-+  - $ref: /schemas/nvmem/nvmem.yaml#
-+
-+properties:
-+  compatible:
-+    const: nvmem-cells
-+
-+required:
-+  - compatible
-+
-+additionalProperties: true
-+
-+examples:
-+  - |
-+    partitions {
-+      compatible = "fixed-partitions";
-+      #address-cells = <1>;
-+      #size-cells = <1>;
-+
-+      /* ... */
-+
-+      };
-+      art: art@1200000 {
-+        compatible = "nvmem-cells";
-+        reg = <0x1200000 0x0140000>;
-+        label = "art";
-+        read-only;
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        macaddr_gmac1: macaddr_gmac1@0 {
-+          reg = <0x0 0x6>;
-+        };
-+
-+        macaddr_gmac2: macaddr_gmac2@6 {
-+          reg = <0x6 0x6>;
-+        };
-+
-+        pre_cal_24g: pre_cal_24g@1000 {
-+          reg = <0x1000 0x2f20>;
-+        };
-+
-+        pre_cal_5g: pre_cal_5g@5000{
-+          reg = <0x5000 0x2f20>;
-+        };
-+      };
-+  - |
-+    partitions {
-+        compatible = "fixed-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        partition@0 {
-+            label = "bootloader";
-+            reg = <0x000000 0x100000>;
-+            read-only;
-+        };
-+
-+        firmware@100000 {
-+            compatible = "brcm,trx";
-+            label = "firmware";
-+            reg = <0x100000 0xe00000>;
-+        };
-+
-+        calibration@f00000 {
-+            compatible = "nvmem-cells";
-+            label = "calibration";
-+            reg = <0xf00000 0x100000>;
-+            ranges = <0 0xf00000 0x100000>;
-+            #address-cells = <1>;
-+            #size-cells = <1>;
-+
-+            wifi0@0 {
-+                reg = <0x000000 0x080000>;
-+            };
-+
-+            wifi1@80000 {
-+                reg = <0x080000 0x080000>;
-+            };
-+        };
-+    };
diff --git a/target/linux/generic/backport-5.10/407-v5.13-0001-dt-bindings-mtd-add-binding-for-Linksys-Northstar-pa.patch b/target/linux/generic/backport-5.10/407-v5.13-0001-dt-bindings-mtd-add-binding-for-Linksys-Northstar-pa.patch
deleted file mode 100644
index 35a4afd67b9a..000000000000
--- a/target/linux/generic/backport-5.10/407-v5.13-0001-dt-bindings-mtd-add-binding-for-Linksys-Northstar-pa.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 2fa7294175c76e1ec568aa75c1891fd908728c8d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Mar 2021 14:49:18 +0100
-Subject: [PATCH] dt-bindings: mtd: add binding for Linksys Northstar
- partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Linksys on Broadcom Northstar devices uses fixed flash layout with
-multiple firmware partitions.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210312134919.7767-1-zajec5@gmail.com
----
- .../mtd/partitions/linksys,ns-partitions.yaml | 74 +++++++++++++++++++
- 1 file changed, 74 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
-@@ -0,0 +1,74 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/partitions/linksys,ns-partitions.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Linksys Northstar partitioning
-+
-+description: |
-+  Linksys devices based on Broadcom Northstar architecture often use two
-+  firmware partitions. One is used for regular booting, the other is treated as
-+  fallback.
-+
-+  This binding allows defining all fixed partitions and marking those containing
-+  firmware. System can use that information e.g. for booting or flashing
-+  purposes.
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+properties:
-+  compatible:
-+    const: linksys,ns-partitions
-+
-+  "#address-cells":
-+    enum: [ 1, 2 ]
-+
-+  "#size-cells":
-+    enum: [ 1, 2 ]
-+
-+patternProperties:
-+  "^partition@[0-9a-f]+$":
-+    $ref: "partition.yaml#"
-+    properties:
-+      compatible:
-+        items:
-+          - const: linksys,ns-firmware
-+          - const: brcm,trx
-+    unevaluatedProperties: false
-+
-+required:
-+  - "#address-cells"
-+  - "#size-cells"
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    partitions {
-+        compatible = "linksys,ns-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        partition@0 {
-+            label = "boot";
-+            reg = <0x0 0x100000>;
-+            read-only;
-+        };
-+
-+        partition@100000 {
-+            label = "nvram";
-+            reg = <0x100000 0x100000>;
-+        };
-+
-+        partition@200000 {
-+            compatible = "linksys,ns-firmware", "brcm,trx";
-+            reg = <0x200000 0xf00000>;
-+        };
-+
-+        partition@1100000 {
-+            compatible = "linksys,ns-firmware", "brcm,trx";
-+            reg = <0x1100000 0xf00000>;
-+        };
-+    };
diff --git a/target/linux/generic/backport-5.10/407-v5.13-0002-mtd-parsers-ofpart-support-Linksys-Northstar-partiti.patch b/target/linux/generic/backport-5.10/407-v5.13-0002-mtd-parsers-ofpart-support-Linksys-Northstar-partiti.patch
deleted file mode 100644
index f3178897857c..000000000000
--- a/target/linux/generic/backport-5.10/407-v5.13-0002-mtd-parsers-ofpart-support-Linksys-Northstar-partiti.patch
+++ /dev/null
@@ -1,156 +0,0 @@
-From 7134a2d026d942210b4d26d6059c9d979ca7866e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Mar 2021 14:49:19 +0100
-Subject: [PATCH] mtd: parsers: ofpart: support Linksys Northstar partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows extending ofpart parser with support for Linksys Northstar
-devices. That support uses recently added quirks mechanism.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210312134919.7767-2-zajec5@gmail.com
----
- drivers/mtd/parsers/Kconfig             | 10 +++++
- drivers/mtd/parsers/Makefile            |  1 +
- drivers/mtd/parsers/ofpart_core.c       |  6 +++
- drivers/mtd/parsers/ofpart_linksys_ns.c | 50 +++++++++++++++++++++++++
- drivers/mtd/parsers/ofpart_linksys_ns.h | 18 +++++++++
- 5 files changed, 85 insertions(+)
- create mode 100644 drivers/mtd/parsers/ofpart_linksys_ns.c
- create mode 100644 drivers/mtd/parsers/ofpart_linksys_ns.h
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -76,6 +76,16 @@ config MTD_OF_PARTS_BCM4908
- 	  that can have multiple "firmware" partitions. It takes care of
- 	  finding currently used one and backup ones.
- 
-+config MTD_OF_PARTS_LINKSYS_NS
-+	bool "Linksys Northstar partitioning support"
-+	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
-+	default ARCH_BCM_5301X
-+	help
-+	  This provides partitions parser for Linksys devices based on Broadcom
-+	  Northstar architecture. Linksys commonly uses fixed flash layout with
-+	  two "firmware" partitions. Currently used firmware has to be detected
-+	  using CFE environment variable.
-+
- config MTD_PARSER_IMAGETAG
- 	tristate "Parser for BCM963XX Image Tag format partitions"
- 	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS)		+= cmdl
- obj-$(CONFIG_MTD_OF_PARTS)		+= ofpart.o
- ofpart-y				+= ofpart_core.o
- ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908)	+= ofpart_bcm4908.o
-+ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o
- obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
- obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
- obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -17,6 +17,7 @@
- #include <linux/mtd/partitions.h>
- 
- #include "ofpart_bcm4908.h"
-+#include "ofpart_linksys_ns.h"
- 
- struct fixed_partitions_quirks {
- 	int (*post_parse)(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
-@@ -26,6 +27,10 @@ static struct fixed_partitions_quirks bc
- 	.post_parse = bcm4908_partitions_post_parse,
- };
- 
-+static struct fixed_partitions_quirks linksys_ns_partitions_quirks = {
-+	.post_parse = linksys_ns_partitions_post_parse,
-+};
-+
- static const struct of_device_id parse_ofpart_match_table[];
- 
- static bool node_has_compatible(struct device_node *pp)
-@@ -167,6 +172,7 @@ static const struct of_device_id parse_o
- 	{ .compatible = "fixed-partitions" },
- 	/* Customized */
- 	{ .compatible = "brcm,bcm4908-partitions", .data = &bcm4908_partitions_quirks, },
-+	{ .compatible = "linksys,ns-partitions", .data = &linksys_ns_partitions_quirks, },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, parse_ofpart_match_table);
---- /dev/null
-+++ b/drivers/mtd/parsers/ofpart_linksys_ns.c
-@@ -0,0 +1,50 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/bcm47xx_nvram.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include "ofpart_linksys_ns.h"
-+
-+#define NVRAM_BOOT_PART		"bootpartition"
-+
-+static int ofpart_linksys_ns_bootpartition(void)
-+{
-+	char buf[4];
-+	int bootpartition;
-+
-+	/* Check CFE environment variable */
-+	if (bcm47xx_nvram_getenv(NVRAM_BOOT_PART, buf, sizeof(buf)) > 0) {
-+		if (!kstrtoint(buf, 0, &bootpartition))
-+			return bootpartition;
-+		pr_warn("Failed to parse %s value \"%s\"\n", NVRAM_BOOT_PART,
-+			buf);
-+	} else {
-+		pr_warn("Failed to get NVRAM \"%s\"\n", NVRAM_BOOT_PART);
-+	}
-+
-+	return 0;
-+}
-+
-+int linksys_ns_partitions_post_parse(struct mtd_info *mtd,
-+				     struct mtd_partition *parts,
-+				     int nr_parts)
-+{
-+	int bootpartition = ofpart_linksys_ns_bootpartition();
-+	int trx_idx = 0;
-+	int i;
-+
-+	for (i = 0; i < nr_parts; i++) {
-+		if (of_device_is_compatible(parts[i].of_node, "linksys,ns-firmware")) {
-+			if (trx_idx++ == bootpartition)
-+				parts[i].name = "firmware";
-+			else
-+				parts[i].name = "backup";
-+		}
-+	}
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/mtd/parsers/ofpart_linksys_ns.h
-@@ -0,0 +1,18 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+#ifndef __OFPART_LINKSYS_NS_H
-+#define __OFPART_LINKSYS_NS_H
-+
-+#ifdef CONFIG_MTD_OF_PARTS_LINKSYS_NS
-+int linksys_ns_partitions_post_parse(struct mtd_info *mtd,
-+				     struct mtd_partition *parts,
-+				     int nr_parts);
-+#else
-+static inline int linksys_ns_partitions_post_parse(struct mtd_info *mtd,
-+						   struct mtd_partition *parts,
-+						   int nr_parts)
-+{
-+	return -EOPNOTSUPP;
-+}
-+#endif
-+
-+#endif
diff --git a/target/linux/generic/backport-5.10/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch b/target/linux/generic/backport-5.10/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch
deleted file mode 100644
index 8aba0cab22c4..000000000000
--- a/target/linux/generic/backport-5.10/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 7e4404113686868858a34210c28ae122e967aa64 Mon Sep 17 00:00:00 2001
-From: Mauri Sandberg <sandberg@mailfence.com>
-Date: Tue, 9 Mar 2021 19:48:59 +0200
-Subject: [PATCH] mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip
- 0x2201
-
-Buffer writes do not work with AMD chip 0x2201. The chip in question
-is a AMD/Spansion/Cypress Semiconductor S29GL256N and datasheet [1]
-talks about writing buffers being possible. While waiting for a neater
-solution resort to writing word-sized chunks only.
-
-Without the patch kernel logs will be flooded with entries like below:
-
-jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
-jffs2_build_filesystem(): unlocking the mtd device...
-done.
-jffs2_build_filesystem(): erasing all blocks after the end marker...
-MTD do_write_buffer_wait(): software timeout, address:0x01ec000a.
-jffs2: Write clean marker to block at 0x01920000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01e2000a.
-jffs2: Write clean marker to block at 0x01880000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01e0000a.
-jffs2: Write clean marker to block at 0x01860000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01dc000a.
-jffs2: Write clean marker to block at 0x01820000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01da000a.
-jffs2: Write clean marker to block at 0x01800000 failed: -5
-...
-
-Tested on a Buffalo wzr-hp-g300nh running kernel 5.10.16.
-
-[1] https://www.cypress.com/file/219941/download
-or  https://datasheetspdf.com/pdf-file/565708/SPANSION/S29GL256N/1
-
-Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>
-Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
-Link: https://lore.kernel.org/r/20210309174859.362060-1-sandberg@mailfence.com
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -276,6 +276,10 @@ static void fixup_use_write_buffers(stru
- {
- 	struct map_info *map = mtd->priv;
- 	struct cfi_private *cfi = map->fldrv_priv;
-+
-+	if (cfi->mfr == CFI_MFR_AMD && cfi->id == 0x2201)
-+		return;
-+
- 	if (cfi->cfiq->BufWriteTimeoutTyp) {
- 		pr_debug("Using buffer write method\n");
- 		mtd->_write = cfi_amdstd_write_buffers;
diff --git a/target/linux/generic/backport-5.10/409-v5.14-0001-dt-bindings-mtd-brcm-trx-Add-brcm-trx-magic.patch b/target/linux/generic/backport-5.10/409-v5.14-0001-dt-bindings-mtd-brcm-trx-Add-brcm-trx-magic.patch
deleted file mode 100644
index 1f34652141d5..000000000000
--- a/target/linux/generic/backport-5.10/409-v5.14-0001-dt-bindings-mtd-brcm-trx-Add-brcm-trx-magic.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From a4d82940ff85a7e307953dfa715f65d5ab487e10 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 18 Apr 2021 23:46:14 +0200
-Subject: dt-bindings: mtd: brcm,trx: Add brcm,trx-magic
-
-This adds the description of an additional property which allows to
-specify a custom partition parser magic to detect a trx partition.
-Buffalo has multiple device which are using the trx format, but with
-different magic values.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210418214616.239574-2-hauke@hauke-m.de
----
- .../devicetree/bindings/mtd/partitions/brcm,trx.txt          | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt
-+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt
-@@ -28,6 +28,11 @@ detected by a software parsing TRX heade
- Required properties:
- - compatible : (required) must be "brcm,trx"
- 
-+Optional properties:
-+
-+- brcm,trx-magic: TRX magic, if it is different from the default magic
-+		  0x30524448 as a u32.
-+
- Example:
- 
- flash@0 {
diff --git a/target/linux/generic/backport-5.10/409-v5.14-0002-mtd-parsers-trx-Allow-to-specify-brcm-trx-magic-in-D.patch b/target/linux/generic/backport-5.10/409-v5.14-0002-mtd-parsers-trx-Allow-to-specify-brcm-trx-magic-in-D.patch
deleted file mode 100644
index de2d9148521e..000000000000
--- a/target/linux/generic/backport-5.10/409-v5.14-0002-mtd-parsers-trx-Allow-to-specify-brcm-trx-magic-in-D.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From d7f7e04f8b67571a4bf5a0dcd4f9da4214f5262c Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 18 Apr 2021 23:46:15 +0200
-Subject: mtd: parsers: trx: Allow to specify brcm, trx-magic in DT
-
-Buffalo uses a different TRX magic for every device, to be able to use
-this trx parser, make it possible to specify the TRX magic in device
-tree. If no TRX magic is specified in device tree, the standard value
-will be used. This value should only be specified if a vendor chooses to
-use a non standard TRX magic.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210418214616.239574-3-hauke@hauke-m.de
----
- drivers/mtd/parsers/parser_trx.c | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -51,13 +51,20 @@ static int parser_trx_parse(struct mtd_i
- 			    const struct mtd_partition **pparts,
- 			    struct mtd_part_parser_data *data)
- {
-+	struct device_node *np = mtd_get_of_node(mtd);
- 	struct mtd_partition *parts;
- 	struct mtd_partition *part;
- 	struct trx_header trx;
- 	size_t bytes_read;
- 	uint8_t curr_part = 0, i = 0;
-+	uint32_t trx_magic = TRX_MAGIC;
- 	int err;
- 
-+	/* Get different magic from device tree if specified */
-+	err = of_property_read_u32(np, "brcm,trx-magic", &trx_magic);
-+	if (err != 0 && err != -EINVAL)
-+		pr_err("failed to parse \"brcm,trx-magic\" DT attribute, using default: %d\n", err);
-+
- 	parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition),
- 			GFP_KERNEL);
- 	if (!parts)
-@@ -70,7 +77,7 @@ static int parser_trx_parse(struct mtd_i
- 		return err;
- 	}
- 
--	if (trx.magic != TRX_MAGIC) {
-+	if (trx.magic != trx_magic) {
- 		kfree(parts);
- 		return -ENOENT;
- 	}
diff --git a/target/linux/generic/backport-5.10/409-v5.14-0003-mtd-parsers-trx-Allow-to-use-TRX-parser-on-Mediatek-.patch b/target/linux/generic/backport-5.10/409-v5.14-0003-mtd-parsers-trx-Allow-to-use-TRX-parser-on-Mediatek-.patch
deleted file mode 100644
index faac53527096..000000000000
--- a/target/linux/generic/backport-5.10/409-v5.14-0003-mtd-parsers-trx-Allow-to-use-TRX-parser-on-Mediatek-.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 81bb218c829246962a6327c64eec18ddcc049936 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 18 Apr 2021 23:46:16 +0200
-Subject: mtd: parsers: trx: Allow to use TRX parser on Mediatek SoCs
-
-Buffalo uses the TRX partition format also on Mediatek MT7622 SoCs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210418214616.239574-4-hauke@hauke-m.de
----
- drivers/mtd/parsers/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -115,7 +115,7 @@ config MTD_AFS_PARTS
- 
- config MTD_PARSER_TRX
- 	tristate "Parser for TRX format partitions"
--	depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
-+	depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || COMPILE_TEST)
- 	help
- 	  TRX is a firmware format used by Broadcom on their devices. It
- 	  may contain up to 3/4 partitions (depending on the version).
diff --git a/target/linux/generic/backport-5.10/410-mtd-next-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch b/target/linux/generic/backport-5.10/410-mtd-next-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch
deleted file mode 100644
index 5c49841760f1..000000000000
--- a/target/linux/generic/backport-5.10/410-mtd-next-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 2365f91c861cbfeef7141c69842848c7b2d3c2db Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Sun, 13 Feb 2022 15:40:44 +0900
-Subject: [PATCH] mtd: parsers: trx: allow to use on MediaTek MIPS SoCs
-
-Buffalo sells some router devices which have trx-formatted firmware,
-based on MediaTek MIPS SoCs. To use parser_trx on those devices, add
-"RALINK" to dependency and allow to compile for MediaTek MIPS SoCs.
-
-examples:
-
-- WCR-1166DS  (MT7628)
-- WSR-1166DHP (MT7621)
-- WSR-2533DHP (MT7621)
-
-Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220213064045.1781-1-musashino.open@gmail.com
----
- drivers/mtd/parsers/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -115,7 +115,7 @@ config MTD_AFS_PARTS
- 
- config MTD_PARSER_TRX
- 	tristate "Parser for TRX format partitions"
--	depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || COMPILE_TEST)
-+	depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || RALINK || COMPILE_TEST)
- 	help
- 	  TRX is a firmware format used by Broadcom on their devices. It
- 	  may contain up to 3/4 partitions (depending on the version).
diff --git a/target/linux/generic/backport-5.10/411-v6.0-mtd-parsers-add-support-for-Sercomm-partitions.patch b/target/linux/generic/backport-5.10/411-v6.0-mtd-parsers-add-support-for-Sercomm-partitions.patch
deleted file mode 100644
index 5ed6fd1b3bbd..000000000000
--- a/target/linux/generic/backport-5.10/411-v6.0-mtd-parsers-add-support-for-Sercomm-partitions.patch
+++ /dev/null
@@ -1,301 +0,0 @@
-From 9b78ef0c7997052e9eaa0f7a4513d546fa17358c Mon Sep 17 00:00:00 2001
-From: Mikhail Zhilkin <csharper2005@gmail.com>
-Date: Sun, 29 May 2022 11:07:14 +0000
-Subject: [PATCH] mtd: parsers: add support for Sercomm partitions
-
-This adds an MTD partition parser for the Sercomm partition table that
-is used in some Beeline, Netgear and Sercomm routers.
-
-The Sercomm partition map table contains real partition offsets, which
-may differ from device to device depending on the number and location of
-bad blocks on NAND.
-
-Original patch (proposed by NOGUCHI Hiroshi):
-Link: https://github.com/openwrt/openwrt/pull/1318#issuecomment-420607394
-
-Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
-Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220529110714.189732-1-csharper2005@gmail.com
----
- drivers/mtd/parsers/Kconfig  |   9 ++
- drivers/mtd/parsers/Makefile |   1 +
- drivers/mtd/parsers/scpart.c | 248 +++++++++++++++++++++++++++++++++++
- 3 files changed, 258 insertions(+)
- create mode 100644 drivers/mtd/parsers/scpart.c
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -179,3 +179,12 @@ config MTD_REDBOOT_PARTS_READONLY
- 	  'FIS directory' images, enable this option.
- 
- endif # MTD_REDBOOT_PARTS
-+
-+config MTD_SERCOMM_PARTS
-+	tristate "Sercomm partition table parser"
-+	depends on MTD && RALINK
-+	help
-+	  This provides partitions table parser for devices with Sercomm
-+	  partition map. This partition table contains real partition
-+	  offsets, which may differ from device to device depending on the
-+	  number and location of bad blocks on NAND.
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -10,5 +10,6 @@ ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)
- obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
- obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
- obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
-+obj-$(CONFIG_MTD_SERCOMM_PARTS)		+= scpart.o
- obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS)		+= redboot.o
---- /dev/null
-+++ b/drivers/mtd/parsers/scpart.c
-@@ -0,0 +1,248 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ *    drivers/mtd/scpart.c: Sercomm Partition Parser
-+ *
-+ *    Copyright (C) 2018 NOGUCHI Hiroshi
-+ *    Copyright (C) 2022 Mikhail Zhilkin
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/module.h>
-+
-+#define	MOD_NAME	"scpart"
-+
-+#ifdef pr_fmt
-+#undef pr_fmt
-+#endif
-+
-+#define pr_fmt(fmt) MOD_NAME ": " fmt
-+
-+#define	ID_ALREADY_FOUND	0xffffffffUL
-+
-+#define	MAP_OFFS_IN_BLK		0x800
-+#define	MAP_MIRROR_NUM		2
-+
-+static const char sc_part_magic[] = {
-+	'S', 'C', 'F', 'L', 'M', 'A', 'P', 'O', 'K', '\0',
-+};
-+#define	PART_MAGIC_LEN		sizeof(sc_part_magic)
-+
-+/* assumes that all fields are set by CPU native endian */
-+struct sc_part_desc {
-+	uint32_t	part_id;
-+	uint32_t	part_offs;
-+	uint32_t	part_bytes;
-+};
-+
-+static uint32_t scpart_desc_is_valid(struct sc_part_desc *pdesc)
-+{
-+	return ((pdesc->part_id != 0xffffffffUL) &&
-+		(pdesc->part_offs != 0xffffffffUL) &&
-+		(pdesc->part_bytes != 0xffffffffUL));
-+}
-+
-+static int scpart_scan_partmap(struct mtd_info *master, loff_t partmap_offs,
-+			       struct sc_part_desc **ppdesc)
-+{
-+	int cnt = 0;
-+	int res = 0;
-+	int res2;
-+	loff_t offs;
-+	size_t retlen;
-+	struct sc_part_desc *pdesc = NULL;
-+	struct sc_part_desc *tmpdesc;
-+	uint8_t *buf;
-+
-+	buf = kzalloc(master->erasesize, GFP_KERNEL);
-+	if (!buf) {
-+		res = -ENOMEM;
-+		goto out;
-+	}
-+
-+	res2 = mtd_read(master, partmap_offs, master->erasesize, &retlen, buf);
-+	if (res2 || retlen != master->erasesize) {
-+		res = -EIO;
-+		goto free;
-+	}
-+
-+	for (offs = MAP_OFFS_IN_BLK;
-+	     offs < master->erasesize - sizeof(*tmpdesc);
-+	     offs += sizeof(*tmpdesc)) {
-+		tmpdesc = (struct sc_part_desc *)&buf[offs];
-+		if (!scpart_desc_is_valid(tmpdesc))
-+			break;
-+		cnt++;
-+	}
-+
-+	if (cnt > 0) {
-+		int bytes = cnt * sizeof(*pdesc);
-+
-+		pdesc = kcalloc(cnt, sizeof(*pdesc), GFP_KERNEL);
-+		if (!pdesc) {
-+			res = -ENOMEM;
-+			goto free;
-+		}
-+		memcpy(pdesc, &(buf[MAP_OFFS_IN_BLK]), bytes);
-+
-+		*ppdesc = pdesc;
-+		res = cnt;
-+	}
-+
-+free:
-+	kfree(buf);
-+
-+out:
-+	return res;
-+}
-+
-+static int scpart_find_partmap(struct mtd_info *master,
-+			       struct sc_part_desc **ppdesc)
-+{
-+	int magic_found = 0;
-+	int res = 0;
-+	int res2;
-+	loff_t offs = 0;
-+	size_t retlen;
-+	uint8_t rdbuf[PART_MAGIC_LEN];
-+
-+	while ((magic_found < MAP_MIRROR_NUM) &&
-+			(offs < master->size) &&
-+			 !mtd_block_isbad(master, offs)) {
-+		res2 = mtd_read(master, offs, PART_MAGIC_LEN, &retlen, rdbuf);
-+		if (res2 || retlen != PART_MAGIC_LEN) {
-+			res = -EIO;
-+			goto out;
-+		}
-+		if (!memcmp(rdbuf, sc_part_magic, PART_MAGIC_LEN)) {
-+			pr_debug("Signature found at 0x%llx\n", offs);
-+			magic_found++;
-+			res = scpart_scan_partmap(master, offs, ppdesc);
-+			if (res > 0)
-+				goto out;
-+		}
-+		offs += master->erasesize;
-+	}
-+
-+out:
-+	if (res > 0)
-+		pr_info("Valid 'SC PART MAP' (%d partitions) found at 0x%llx\n", res, offs);
-+	else
-+		pr_info("No valid 'SC PART MAP' was found\n");
-+
-+	return res;
-+}
-+
-+static int scpart_parse(struct mtd_info *master,
-+			const struct mtd_partition **pparts,
-+			struct mtd_part_parser_data *data)
-+{
-+	const char *partname;
-+	int n;
-+	int nr_scparts;
-+	int nr_parts = 0;
-+	int res = 0;
-+	struct sc_part_desc *scpart_map = NULL;
-+	struct mtd_partition *parts = NULL;
-+	struct device_node *mtd_node;
-+	struct device_node *ofpart_node;
-+	struct device_node *pp;
-+
-+	mtd_node = mtd_get_of_node(master);
-+	if (!mtd_node) {
-+		res = -ENOENT;
-+		goto out;
-+	}
-+
-+	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
-+	if (!ofpart_node) {
-+		pr_info("%s: 'partitions' subnode not found on %pOF.\n",
-+				master->name, mtd_node);
-+		res = -ENOENT;
-+		goto out;
-+	}
-+
-+	nr_scparts = scpart_find_partmap(master, &scpart_map);
-+	if (nr_scparts <= 0) {
-+		pr_info("No any partitions was found in 'SC PART MAP'.\n");
-+		res = -ENOENT;
-+		goto free;
-+	}
-+
-+	parts = kcalloc(of_get_child_count(ofpart_node), sizeof(*parts),
-+		GFP_KERNEL);
-+	if (!parts) {
-+		res = -ENOMEM;
-+		goto free;
-+	}
-+
-+	for_each_child_of_node(ofpart_node, pp) {
-+		u32 scpart_id;
-+
-+		if (of_property_read_u32(pp, "sercomm,scpart-id", &scpart_id))
-+			continue;
-+
-+		for (n = 0 ; n < nr_scparts ; n++)
-+			if ((scpart_map[n].part_id != ID_ALREADY_FOUND) &&
-+					(scpart_id == scpart_map[n].part_id))
-+				break;
-+		if (n >= nr_scparts)
-+			/* not match */
-+			continue;
-+
-+		/* add the partition found in OF into MTD partition array */
-+		parts[nr_parts].offset = scpart_map[n].part_offs;
-+		parts[nr_parts].size = scpart_map[n].part_bytes;
-+		parts[nr_parts].of_node = pp;
-+
-+		if (!of_property_read_string(pp, "label", &partname))
-+			parts[nr_parts].name = partname;
-+		if (of_property_read_bool(pp, "read-only"))
-+			parts[nr_parts].mask_flags |= MTD_WRITEABLE;
-+		if (of_property_read_bool(pp, "lock"))
-+			parts[nr_parts].mask_flags |= MTD_POWERUP_LOCK;
-+
-+		/* mark as 'done' */
-+		scpart_map[n].part_id = ID_ALREADY_FOUND;
-+
-+		nr_parts++;
-+	}
-+
-+	if (nr_parts > 0) {
-+		*pparts = parts;
-+		res = nr_parts;
-+	} else
-+		pr_info("No partition in OF matches partition ID with 'SC PART MAP'.\n");
-+
-+	of_node_put(pp);
-+
-+free:
-+	kfree(scpart_map);
-+	if (res <= 0)
-+		kfree(parts);
-+
-+out:
-+	return res;
-+}
-+
-+static const struct of_device_id scpart_parser_of_match_table[] = {
-+	{ .compatible = "sercomm,sc-partitions" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, scpart_parser_of_match_table);
-+
-+static struct mtd_part_parser scpart_parser = {
-+	.parse_fn = scpart_parse,
-+	.name = "scpart",
-+	.of_match_table = scpart_parser_of_match_table,
-+};
-+module_mtd_part_parser(scpart_parser);
-+
-+/* mtd parsers will request the module by parser name */
-+MODULE_ALIAS("scpart");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("NOGUCHI Hiroshi <drvlabo@gmail.com>");
-+MODULE_AUTHOR("Mikhail Zhilkin <csharper2005@gmail.com>");
-+MODULE_DESCRIPTION("Sercomm partition parser");
diff --git a/target/linux/generic/backport-5.10/412-v5.19-mtd-call-of_platform_populate-for-MTD-partitions.patch b/target/linux/generic/backport-5.10/412-v5.19-mtd-call-of_platform_populate-for-MTD-partitions.patch
deleted file mode 100644
index aaeb087c899c..000000000000
--- a/target/linux/generic/backport-5.10/412-v5.19-mtd-call-of_platform_populate-for-MTD-partitions.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From bcdf0315a61a29eb753a607d3a85a4032de72d94 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 10 May 2022 15:12:59 +0200
-Subject: [PATCH] mtd: call of_platform_populate() for MTD partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Until this change MTD subsystem supported handling partitions only with
-MTD partitions parsers. That's a specific / limited API designed around
-partitions.
-
-Some MTD partitions may however require different handling. They may
-contain specific data that needs to be parsed and somehow extracted. For
-that purpose MTD subsystem should allow binding of standard platform
-drivers.
-
-An example can be U-Boot (sub)partition with environment variables.
-There exist a "u-boot,env" DT binding for MTD (sub)partition that
-requires an NVMEM driver.
-
-Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220510131259.555-1-zajec5@gmail.com
----
- drivers/mtd/mtdpart.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -17,6 +17,7 @@
- #include <linux/mtd/partitions.h>
- #include <linux/err.h>
- #include <linux/of.h>
-+#include <linux/of_platform.h>
- 
- #include "mtdcore.h"
- 
-@@ -578,10 +579,16 @@ static int mtd_part_of_parse(struct mtd_
- 	struct mtd_part_parser *parser;
- 	struct device_node *np;
- 	struct property *prop;
-+	struct device *dev;
- 	const char *compat;
- 	const char *fixed = "fixed-partitions";
- 	int ret, err = 0;
- 
-+	dev = &master->dev;
-+	/* Use parent device (controller) if the top level MTD is not registered */
-+	if (!IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) && !mtd_is_partition(master))
-+		dev = master->dev.parent;
-+
- 	np = mtd_get_of_node(master);
- 	if (mtd_is_partition(master))
- 		of_node_get(np);
-@@ -594,6 +601,7 @@ static int mtd_part_of_parse(struct mtd_
- 			continue;
- 		ret = mtd_part_do_parse(parser, master, pparts, NULL);
- 		if (ret > 0) {
-+			of_platform_populate(np, NULL, NULL, dev);
- 			of_node_put(np);
- 			return ret;
- 		}
-@@ -601,6 +609,7 @@ static int mtd_part_of_parse(struct mtd_
- 		if (ret < 0 && !err)
- 			err = ret;
- 	}
-+	of_platform_populate(np, NULL, NULL, dev);
- 	of_node_put(np);
- 
- 	/*
diff --git a/target/linux/generic/backport-5.10/413-v6.0-mtd-next-mtd-core-introduce-of-support-for-dynamic-partitions.patch b/target/linux/generic/backport-5.10/413-v6.0-mtd-next-mtd-core-introduce-of-support-for-dynamic-partitions.patch
deleted file mode 100644
index e71098d56334..000000000000
--- a/target/linux/generic/backport-5.10/413-v6.0-mtd-next-mtd-core-introduce-of-support-for-dynamic-partitions.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From ad9b10d1eaada169bd764abcab58f08538877e26 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 22 Jun 2022 03:06:28 +0200
-Subject: mtd: core: introduce of support for dynamic partitions
-
-We have many parser that register mtd partitions at runtime. One example
-is the cmdlinepart or the smem-part parser where the compatible is defined
-in the dts and the partitions gets detected and registered by the
-parser. This is problematic for the NVMEM subsystem that requires an OF
-node to detect NVMEM cells.
-
-To fix this problem, introduce an additional logic that will try to
-assign an OF node to the MTD if declared.
-
-On MTD addition, it will be checked if the MTD has an OF node and if
-not declared will check if a partition with the same label / node name is
-declared in DTS. If an exact match is found, the partition dynamically
-allocated by the parser will have a connected OF node.
-
-The NVMEM subsystem will detect the OF node and register any NVMEM cells
-declared statically in the DTS.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220622010628.30414-4-ansuelsmth@gmail.com
----
- drivers/mtd/mtdcore.c | 61 +++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 61 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -561,6 +561,66 @@ static int mtd_nvmem_add(struct mtd_info
- 	return 0;
- }
- 
-+static void mtd_check_of_node(struct mtd_info *mtd)
-+{
-+	struct device_node *partitions, *parent_dn, *mtd_dn = NULL;
-+	const char *pname, *prefix = "partition-";
-+	int plen, mtd_name_len, offset, prefix_len;
-+	struct mtd_info *parent;
-+	bool found = false;
-+
-+	/* Check if MTD already has a device node */
-+	if (dev_of_node(&mtd->dev))
-+		return;
-+
-+	/* Check if a partitions node exist */
-+	parent = mtd->parent;
-+	parent_dn = dev_of_node(&parent->dev);
-+	if (!parent_dn)
-+		return;
-+
-+	partitions = of_get_child_by_name(parent_dn, "partitions");
-+	if (!partitions)
-+		goto exit_parent;
-+
-+	prefix_len = strlen(prefix);
-+	mtd_name_len = strlen(mtd->name);
-+
-+	/* Search if a partition is defined with the same name */
-+	for_each_child_of_node(partitions, mtd_dn) {
-+		offset = 0;
-+
-+		/* Skip partition with no/wrong prefix */
-+		if (!of_node_name_prefix(mtd_dn, "partition-"))
-+			continue;
-+
-+		/* Label have priority. Check that first */
-+		if (of_property_read_string(mtd_dn, "label", &pname)) {
-+			of_property_read_string(mtd_dn, "name", &pname);
-+			offset = prefix_len;
-+		}
-+
-+		plen = strlen(pname) - offset;
-+		if (plen == mtd_name_len &&
-+		    !strncmp(mtd->name, pname + offset, plen)) {
-+			found = true;
-+			break;
-+		}
-+	}
-+
-+	if (!found)
-+		goto exit_partitions;
-+
-+	/* Set of_node only for nvmem */
-+	if (of_device_is_compatible(mtd_dn, "nvmem-cells"))
-+		mtd_set_of_node(mtd, mtd_dn);
-+
-+exit_partitions:
-+	of_node_put(partitions);
-+exit_parent:
-+	of_node_put(parent_dn);
-+}
-+
- /**
-  *	add_mtd_device - register an MTD device
-  *	@mtd: pointer to new MTD device info structure
-@@ -666,6 +726,7 @@ int add_mtd_device(struct mtd_info *mtd)
- 	mtd->dev.devt = MTD_DEVT(i);
- 	dev_set_name(&mtd->dev, "mtd%d", i);
- 	dev_set_drvdata(&mtd->dev, mtd);
-+	mtd_check_of_node(mtd);
- 	of_node_get(mtd_get_of_node(mtd));
- 	error = device_register(&mtd->dev);
- 	if (error) {
diff --git a/target/linux/generic/backport-5.10/414-v6.1-mtd-allow-getting-MTD-device-associated-with-a-speci.patch b/target/linux/generic/backport-5.10/414-v6.1-mtd-allow-getting-MTD-device-associated-with-a-speci.patch
deleted file mode 100644
index 968279185e9d..000000000000
--- a/target/linux/generic/backport-5.10/414-v6.1-mtd-allow-getting-MTD-device-associated-with-a-speci.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From b0321721be50b80c03a51866a94fde4f94690e18 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 15 Jun 2022 21:42:59 +0200
-Subject: [PATCH] mtd: allow getting MTD device associated with a specific DT
- node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-MTD subsystem API allows interacting with MTD devices (e.g. reading,
-writing, handling bad blocks). So far a random driver could get MTD
-device only by its name (get_mtd_device_nm()). This change allows
-getting them also by a DT node.
-
-This API is required for drivers handling DT defined MTD partitions in a
-specific way (e.g. U-Boot (sub)partition with environment variables).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- drivers/mtd/mtdcore.c   | 28 ++++++++++++++++++++++++++++
- include/linux/mtd/mtd.h |  1 +
- 2 files changed, 29 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -1072,6 +1072,34 @@ int __get_mtd_device(struct mtd_info *mt
- EXPORT_SYMBOL_GPL(__get_mtd_device);
- 
- /**
-+ * of_get_mtd_device_by_node - obtain an MTD device associated with a given node
-+ *
-+ * @np: device tree node
-+ */
-+struct mtd_info *of_get_mtd_device_by_node(struct device_node *np)
-+{
-+	struct mtd_info *mtd = NULL;
-+	struct mtd_info *tmp;
-+	int err;
-+
-+	mutex_lock(&mtd_table_mutex);
-+
-+	err = -EPROBE_DEFER;
-+	mtd_for_each_device(tmp) {
-+		if (mtd_get_of_node(tmp) == np) {
-+			mtd = tmp;
-+			err = __get_mtd_device(mtd);
-+			break;
-+		}
-+	}
-+
-+	mutex_unlock(&mtd_table_mutex);
-+
-+	return err ? ERR_PTR(err) : mtd;
-+}
-+EXPORT_SYMBOL_GPL(of_get_mtd_device_by_node);
-+
-+/**
-  *	get_mtd_device_nm - obtain a validated handle for an MTD device by
-  *	device name
-  *	@name: MTD device name to open
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -675,6 +675,7 @@ extern int mtd_device_unregister(struct
- extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
- extern int __get_mtd_device(struct mtd_info *mtd);
- extern void __put_mtd_device(struct mtd_info *mtd);
-+extern struct mtd_info *of_get_mtd_device_by_node(struct device_node *np);
- extern struct mtd_info *get_mtd_device_nm(const char *name);
- extern void put_mtd_device(struct mtd_info *mtd);
- 
diff --git a/target/linux/generic/backport-5.10/415-v6.0-mtd-core-check-partition-before-dereference.patch b/target/linux/generic/backport-5.10/415-v6.0-mtd-core-check-partition-before-dereference.patch
deleted file mode 100644
index 65789ddf2d30..000000000000
--- a/target/linux/generic/backport-5.10/415-v6.0-mtd-core-check-partition-before-dereference.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 7ec4cdb321738d44ae5d405e7b6ac73dfbf99caa Mon Sep 17 00:00:00 2001
-From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
-Date: Mon, 25 Jul 2022 22:49:25 +0900
-Subject: [PATCH] mtd: core: check partition before dereference
-
-syzbot is reporting NULL pointer dereference at mtd_check_of_node() [1],
-for mtdram test device (CONFIG_MTD_MTDRAM) is not partition.
-
-Link: https://syzkaller.appspot.com/bug?extid=fe013f55a2814a9e8cfd [1]
-Reported-by: syzbot <syzbot+fe013f55a2814a9e8cfd@syzkaller.appspotmail.com>
-Reported-by: kernel test robot <oliver.sang@intel.com>
-Fixes: ad9b10d1eaada169 ("mtd: core: introduce of support for dynamic partitions")
-Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
-CC: stable@vger.kernel.org
-Signed-off-by: Richard Weinberger <richard@nod.at>
----
- drivers/mtd/mtdcore.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -574,6 +574,8 @@ static void mtd_check_of_node(struct mtd
- 		return;
- 
- 	/* Check if a partitions node exist */
-+	if (!mtd_is_partition(mtd))
-+		return;
- 	parent = mtd->parent;
- 	parent_dn = dev_of_node(&parent->dev);
- 	if (!parent_dn)
diff --git a/target/linux/generic/backport-5.10/416-v6.1-mtd-core-add-missing-of_node_get-in-dynamic-partitio.patch b/target/linux/generic/backport-5.10/416-v6.1-mtd-core-add-missing-of_node_get-in-dynamic-partitio.patch
deleted file mode 100644
index 0c359c65f87a..000000000000
--- a/target/linux/generic/backport-5.10/416-v6.1-mtd-core-add-missing-of_node_get-in-dynamic-partitio.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 12b58961de0bd88b3c7dfa5d21f6d67f4678b780 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 18 Oct 2022 07:18:22 +0200
-Subject: [PATCH] mtd: core: add missing of_node_get() in dynamic partitions
- code
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes unbalanced of_node_put():
-[    1.078910] 6 cmdlinepart partitions found on MTD device gpmi-nand
-[    1.085116] Creating 6 MTD partitions on "gpmi-nand":
-[    1.090181] 0x000000000000-0x000008000000 : "nandboot"
-[    1.096952] 0x000008000000-0x000009000000 : "nandfit"
-[    1.103547] 0x000009000000-0x00000b000000 : "nandkernel"
-[    1.110317] 0x00000b000000-0x00000c000000 : "nanddtb"
-[    1.115525] ------------[ cut here ]------------
-[    1.120141] refcount_t: addition on 0; use-after-free.
-[    1.125328] WARNING: CPU: 0 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0xdc/0x148
-[    1.133528] Modules linked in:
-[    1.136589] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc7-next-20220930-04543-g8cf3f7
-[    1.146342] Hardware name: Freescale i.MX8DXL DDR3L EVK (DT)
-[    1.151999] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
-[    1.158965] pc : refcount_warn_saturate+0xdc/0x148
-[    1.163760] lr : refcount_warn_saturate+0xdc/0x148
-[    1.168556] sp : ffff800009ddb080
-[    1.171866] x29: ffff800009ddb080 x28: ffff800009ddb35a x27: 0000000000000002
-[    1.179015] x26: ffff8000098b06ad x25: ffffffffffffffff x24: ffff0a00ffffff05
-[    1.186165] x23: ffff00001fdf6470 x22: ffff800009ddb367 x21: 0000000000000000
-[    1.193314] x20: ffff00001fdfebe8 x19: ffff00001fdfec50 x18: ffffffffffffffff
-[    1.200464] x17: 0000000000000000 x16: 0000000000000118 x15: 0000000000000004
-[    1.207614] x14: 0000000000000fff x13: ffff800009bca248 x12: 0000000000000003
-[    1.214764] x11: 00000000ffffefff x10: c0000000ffffefff x9 : 4762cb2ccb52de00
-[    1.221914] x8 : 4762cb2ccb52de00 x7 : 205d313431303231 x6 : 312e31202020205b
-[    1.229063] x5 : ffff800009d55c1f x4 : 0000000000000001 x3 : 0000000000000000
-[    1.236213] x2 : 0000000000000000 x1 : ffff800009954be6 x0 : 000000000000002a
-[    1.243365] Call trace:
-[    1.245806]  refcount_warn_saturate+0xdc/0x148
-[    1.250253]  kobject_get+0x98/0x9c
-[    1.253658]  of_node_get+0x20/0x34
-[    1.257072]  of_fwnode_get+0x3c/0x54
-[    1.260652]  fwnode_get_nth_parent+0xd8/0xf4
-[    1.264926]  fwnode_full_name_string+0x3c/0xb4
-[    1.269373]  device_node_string+0x498/0x5b4
-[    1.273561]  pointer+0x41c/0x5d0
-[    1.276793]  vsnprintf+0x4d8/0x694
-[    1.280198]  vprintk_store+0x164/0x528
-[    1.283951]  vprintk_emit+0x98/0x164
-[    1.287530]  vprintk_default+0x44/0x6c
-[    1.291284]  vprintk+0xf0/0x134
-[    1.294428]  _printk+0x54/0x7c
-[    1.297486]  of_node_release+0xe8/0x128
-[    1.301326]  kobject_put+0x98/0xfc
-[    1.304732]  of_node_put+0x1c/0x28
-[    1.308137]  add_mtd_device+0x484/0x6d4
-[    1.311977]  add_mtd_partitions+0xf0/0x1d0
-[    1.316078]  parse_mtd_partitions+0x45c/0x518
-[    1.320439]  mtd_device_parse_register+0xb0/0x274
-[    1.325147]  gpmi_nand_probe+0x51c/0x650
-[    1.329074]  platform_probe+0xa8/0xd0
-[    1.332740]  really_probe+0x130/0x334
-[    1.336406]  __driver_probe_device+0xb4/0xe0
-[    1.340681]  driver_probe_device+0x3c/0x1f8
-[    1.344869]  __driver_attach+0xdc/0x1a4
-[    1.348708]  bus_for_each_dev+0x80/0xcc
-[    1.352548]  driver_attach+0x24/0x30
-[    1.356127]  bus_add_driver+0x108/0x1f4
-[    1.359967]  driver_register+0x78/0x114
-[    1.363807]  __platform_driver_register+0x24/0x30
-[    1.368515]  gpmi_nand_driver_init+0x1c/0x28
-[    1.372798]  do_one_initcall+0xbc/0x238
-[    1.376638]  do_initcall_level+0x94/0xb4
-[    1.380565]  do_initcalls+0x54/0x94
-[    1.384058]  do_basic_setup+0x1c/0x28
-[    1.387724]  kernel_init_freeable+0x110/0x188
-[    1.392084]  kernel_init+0x20/0x1a0
-[    1.395578]  ret_from_fork+0x10/0x20
-[    1.399157] ---[ end trace 0000000000000000 ]---
-[    1.403782] ------------[ cut here ]------------
-
-Reported-by: Han Xu <han.xu@nxp.com>
-Fixes: ad9b10d1eaada169 ("mtd: core: introduce of support for dynamic partitions")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Tested-by: Han Xu <han.xu@nxp.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20221018051822.28685-1-zajec5@gmail.com
----
- drivers/mtd/mtdcore.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -577,7 +577,7 @@ static void mtd_check_of_node(struct mtd
- 	if (!mtd_is_partition(mtd))
- 		return;
- 	parent = mtd->parent;
--	parent_dn = dev_of_node(&parent->dev);
-+	parent_dn = of_node_get(dev_of_node(&parent->dev));
- 	if (!parent_dn)
- 		return;
- 
diff --git a/target/linux/generic/backport-5.10/417-v6.2-0001-mtd-core-simplify-a-bit-code-find-partition-matching.patch b/target/linux/generic/backport-5.10/417-v6.2-0001-mtd-core-simplify-a-bit-code-find-partition-matching.patch
deleted file mode 100644
index e47def580c29..000000000000
--- a/target/linux/generic/backport-5.10/417-v6.2-0001-mtd-core-simplify-a-bit-code-find-partition-matching.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 63db0cb35e1cb3b3c134906d1062f65513fdda2d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 4 Oct 2022 10:37:09 +0200
-Subject: [PATCH] mtd: core: simplify (a bit) code find partition-matching
- dynamic OF node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Don't hardcode "partition-" string twice
-2. Use simpler logic & use ->name to avoid of_property_read_string()
-3. Use mtd_get_of_node() helper
-
-Cc: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20221004083710.27704-1-zajec5@gmail.com
----
- drivers/mtd/mtdcore.c | 16 +++++++---------
- 1 file changed, 7 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -566,18 +566,16 @@ static void mtd_check_of_node(struct mtd
- 	struct device_node *partitions, *parent_dn, *mtd_dn = NULL;
- 	const char *pname, *prefix = "partition-";
- 	int plen, mtd_name_len, offset, prefix_len;
--	struct mtd_info *parent;
- 	bool found = false;
- 
- 	/* Check if MTD already has a device node */
--	if (dev_of_node(&mtd->dev))
-+	if (mtd_get_of_node(mtd))
- 		return;
- 
- 	/* Check if a partitions node exist */
- 	if (!mtd_is_partition(mtd))
- 		return;
--	parent = mtd->parent;
--	parent_dn = of_node_get(dev_of_node(&parent->dev));
-+	parent_dn = of_node_get(mtd_get_of_node(mtd->parent));
- 	if (!parent_dn)
- 		return;
- 
-@@ -590,15 +588,15 @@ static void mtd_check_of_node(struct mtd
- 
- 	/* Search if a partition is defined with the same name */
- 	for_each_child_of_node(partitions, mtd_dn) {
--		offset = 0;
--
- 		/* Skip partition with no/wrong prefix */
--		if (!of_node_name_prefix(mtd_dn, "partition-"))
-+		if (!of_node_name_prefix(mtd_dn, prefix))
- 			continue;
- 
- 		/* Label have priority. Check that first */
--		if (of_property_read_string(mtd_dn, "label", &pname)) {
--			of_property_read_string(mtd_dn, "name", &pname);
-+		if (!of_property_read_string(mtd_dn, "label", &pname)) {
-+			offset = 0;
-+		} else {
-+			pname = mtd_dn->name;
- 			offset = prefix_len;
- 		}
- 
diff --git a/target/linux/generic/backport-5.10/417-v6.2-0002-mtd-core-try-to-find-OF-node-for-every-MTD-partition.patch b/target/linux/generic/backport-5.10/417-v6.2-0002-mtd-core-try-to-find-OF-node-for-every-MTD-partition.patch
deleted file mode 100644
index 438e25b7f97e..000000000000
--- a/target/linux/generic/backport-5.10/417-v6.2-0002-mtd-core-try-to-find-OF-node-for-every-MTD-partition.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From ddb8cefb7af288950447ca6eeeafb09977dab56f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 4 Oct 2022 10:37:10 +0200
-Subject: [PATCH] mtd: core: try to find OF node for every MTD partition
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far this feature was limited to the top-level "nvmem-cells" node.
-There are multiple parsers creating partitions and subpartitions
-dynamically. Extend that code to handle them too.
-
-This allows finding partition-* node for every MTD (sub)partition.
-
-Random example:
-
-partitions {
-	compatible = "brcm,bcm947xx-cfe-partitions";
-
-	partition-firmware {
-		compatible = "brcm,trx";
-
-		partition-loader {
-		};
-	};
-};
-
-Cc: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20221004083710.27704-2-zajec5@gmail.com
----
- drivers/mtd/mtdcore.c | 18 ++++++------------
- 1 file changed, 6 insertions(+), 12 deletions(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -566,20 +566,22 @@ static void mtd_check_of_node(struct mtd
- 	struct device_node *partitions, *parent_dn, *mtd_dn = NULL;
- 	const char *pname, *prefix = "partition-";
- 	int plen, mtd_name_len, offset, prefix_len;
--	bool found = false;
- 
- 	/* Check if MTD already has a device node */
- 	if (mtd_get_of_node(mtd))
- 		return;
- 
--	/* Check if a partitions node exist */
- 	if (!mtd_is_partition(mtd))
- 		return;
-+
- 	parent_dn = of_node_get(mtd_get_of_node(mtd->parent));
- 	if (!parent_dn)
- 		return;
- 
--	partitions = of_get_child_by_name(parent_dn, "partitions");
-+	if (mtd_is_partition(mtd->parent))
-+		partitions = of_node_get(parent_dn);
-+	else
-+		partitions = of_get_child_by_name(parent_dn, "partitions");
- 	if (!partitions)
- 		goto exit_parent;
- 
-@@ -603,19 +605,11 @@ static void mtd_check_of_node(struct mtd
- 		plen = strlen(pname) - offset;
- 		if (plen == mtd_name_len &&
- 		    !strncmp(mtd->name, pname + offset, plen)) {
--			found = true;
-+			mtd_set_of_node(mtd, mtd_dn);
- 			break;
- 		}
- 	}
- 
--	if (!found)
--		goto exit_partitions;
--
--	/* Set of_node only for nvmem */
--	if (of_device_is_compatible(mtd_dn, "nvmem-cells"))
--		mtd_set_of_node(mtd, mtd_dn);
--
--exit_partitions:
- 	of_node_put(partitions);
- exit_parent:
- 	of_node_put(parent_dn);
diff --git a/target/linux/generic/backport-5.10/418-v6.2-mtd-core-set-ROOT_DEV-for-partitions-marked-as-rootf.patch b/target/linux/generic/backport-5.10/418-v6.2-mtd-core-set-ROOT_DEV-for-partitions-marked-as-rootf.patch
deleted file mode 100644
index 2a132bd8a334..000000000000
--- a/target/linux/generic/backport-5.10/418-v6.2-mtd-core-set-ROOT_DEV-for-partitions-marked-as-rootf.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 26422ac78e9d8767bd4aabfbae616b15edbf6a1b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 22 Oct 2022 23:13:18 +0200
-Subject: [PATCH] mtd: core: set ROOT_DEV for partitions marked as rootfs in DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds support for "linux,rootfs" binding that is used to mark flash
-partition containing rootfs. It's useful for devices using device tree
-that don't have bootloader passing root info in cmdline.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20221022211318.32009-2-zajec5@gmail.com
----
- drivers/mtd/mtdcore.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -28,6 +28,7 @@
- #include <linux/leds.h>
- #include <linux/debugfs.h>
- #include <linux/nvmem-provider.h>
-+#include <linux/root_dev.h>
- 
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-@@ -745,6 +746,17 @@ int add_mtd_device(struct mtd_info *mtd)
- 		not->add(mtd);
- 
- 	mutex_unlock(&mtd_table_mutex);
-+
-+	if (of_find_property(mtd_get_of_node(mtd), "linux,rootfs", NULL)) {
-+		if (IS_BUILTIN(CONFIG_MTD)) {
-+			pr_info("mtd: setting mtd%d (%s) as root device\n", mtd->index, mtd->name);
-+			ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
-+		} else {
-+			pr_warn("mtd: can't set mtd%d (%s) as root device - mtd must be builtin\n",
-+				mtd->index, mtd->name);
-+		}
-+	}
-+
- 	/* We _know_ we aren't being removed, because
- 	   our caller is still holding us here. So none
- 	   of this try_ nonsense, and no bitching about it
diff --git a/target/linux/generic/backport-5.10/419-v5.14-mtd-spinand-gigadevice-Support-GD5F1GQ5UExxG.patch b/target/linux/generic/backport-5.10/419-v5.14-mtd-spinand-gigadevice-Support-GD5F1GQ5UExxG.patch
deleted file mode 100644
index 00c43879f627..000000000000
--- a/target/linux/generic/backport-5.10/419-v5.14-mtd-spinand-gigadevice-Support-GD5F1GQ5UExxG.patch
+++ /dev/null
@@ -1,172 +0,0 @@
-From bd568cc04c675b7fa97214d278a54794c2ecc2ad Mon Sep 17 00:00:00 2001
-From: Reto Schneider <reto.schneider@husqvarnagroup.com>
-Date: Thu, 11 Feb 2021 12:36:19 +0100
-Subject: [PATCH] mtd: spinand: gigadevice: Support GD5F1GQ5UExxG
-
-The relevant changes to the already existing GD5F1GQ4UExxG support has
-been determined by consulting the GigaDevice product change notice
-AN-0392-10, version 1.0 from November 30, 2020.
-
-As the overlaps are huge, variable names have been generalized
-accordingly.
-
-Apart from the lowered ECC strength (4 instead of 8 bits per 512 bytes),
-the new device ID, and the extra quad IO dummy byte, no changes had to
-be taken into account.
-
-New hardware features are not supported, namely:
- - Power on reset
- - Unique ID
- - Double transfer rate (DTR)
- - Parameter page
- - Random data quad IO
-
-The inverted semantic of the "driver strength" register bits, defaulting
-to 100% instead of 50% for the Q5 devices, got ignored as the driver has
-never touched them anyway.
-
-The no longer supported "read from cache during block erase"
-functionality is not reflected as the current SPI NAND core does not
-support it anyway.
-
-Implementation has been tested on MediaTek MT7688 based GARDENA smart
-Gateways using both, GigaDevice GD5F1GQ5UEYIG and GD5F1GQ4UBYIG.
-
-Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
-Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
-Reviewed-by: Stefan Roese <sr@denx.de>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210211113619.3502-1-code@reto-schneider.ch
-(cherry picked from commit 469b992489852b500d39048aa0013639dfe9f2e6)
----
- drivers/mtd/nand/spi/gigadevice.c | 69 +++++++++++++++++++++++++++----
- 1 file changed, 60 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/nand/spi/gigadevice.c
-+++ b/drivers/mtd/nand/spi/gigadevice.c
-@@ -13,7 +13,10 @@
- #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
- #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
- 
--#define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
-+#define GD5FXGQ5XE_STATUS_ECC_1_4_BITFLIPS	(1 << 4)
-+#define GD5FXGQ5XE_STATUS_ECC_4_BITFLIPS	(3 << 4)
-+
-+#define GD5FXGQXXEXXG_REG_STATUS2		0xf0
- 
- #define GD5FXGQ4UXFXXG_STATUS_ECC_MASK		(7 << 4)
- #define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS	(0 << 4)
-@@ -102,7 +105,7 @@ static int gd5fxgq4xa_ecc_get_status(str
- 	return -EINVAL;
- }
- 
--static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
-+static int gd5fxgqx_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
- 				       struct mtd_oob_region *region)
- {
- 	if (section)
-@@ -114,7 +117,7 @@ static int gd5fxgq4_variant2_ooblayout_e
- 	return 0;
- }
- 
--static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
-+static int gd5fxgqx_variant2_ooblayout_free(struct mtd_info *mtd, int section,
- 					struct mtd_oob_region *region)
- {
- 	if (section)
-@@ -127,9 +130,10 @@ static int gd5fxgq4_variant2_ooblayout_f
- 	return 0;
- }
- 
--static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
--	.ecc = gd5fxgq4_variant2_ooblayout_ecc,
--	.free = gd5fxgq4_variant2_ooblayout_free,
-+/* Valid for Q4/Q5 and Q6 (untested) devices */
-+static const struct mtd_ooblayout_ops gd5fxgqx_variant2_ooblayout = {
-+	.ecc = gd5fxgqx_variant2_ooblayout_ecc,
-+	.free = gd5fxgqx_variant2_ooblayout_free,
- };
- 
- static int gd5fxgq4xc_ooblayout_256_ecc(struct mtd_info *mtd, int section,
-@@ -165,7 +169,7 @@ static int gd5fxgq4uexxg_ecc_get_status(
- 					u8 status)
- {
- 	u8 status2;
--	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQ4UEXXG_REG_STATUS2,
-+	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQXXEXXG_REG_STATUS2,
- 						      &status2);
- 	int ret;
- 
-@@ -203,6 +207,43 @@ static int gd5fxgq4uexxg_ecc_get_status(
- 	return -EINVAL;
- }
- 
-+static int gd5fxgq5xexxg_ecc_get_status(struct spinand_device *spinand,
-+					u8 status)
-+{
-+	u8 status2;
-+	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQXXEXXG_REG_STATUS2,
-+						      &status2);
-+	int ret;
-+
-+	switch (status & STATUS_ECC_MASK) {
-+	case STATUS_ECC_NO_BITFLIPS:
-+		return 0;
-+
-+	case GD5FXGQ5XE_STATUS_ECC_1_4_BITFLIPS:
-+		/*
-+		 * Read status2 register to determine a more fine grained
-+		 * bit error status
-+		 */
-+		ret = spi_mem_exec_op(spinand->spimem, &op);
-+		if (ret)
-+			return ret;
-+
-+		/*
-+		 * 1 ... 4 bits are flipped (and corrected)
-+		 */
-+		/* bits sorted this way (1...0): ECCSE1, ECCSE0 */
-+		return ((status2 & STATUS_ECC_MASK) >> 4) + 1;
-+
-+	case STATUS_ECC_UNCOR_ERROR:
-+		return -EBADMSG;
-+
-+	default:
-+		break;
-+	}
-+
-+	return -EINVAL;
-+}
-+
- static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
- 					u8 status)
- {
-@@ -282,7 +323,7 @@ static const struct spinand_info gigadev
- 					      &write_cache_variants,
- 					      &update_cache_variants),
- 		     SPINAND_HAS_QE_BIT,
--		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
- 				     gd5fxgq4uexxg_ecc_get_status)),
- 	SPINAND_INFO("GD5F1GQ4UFxxG",
- 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE, 0xb1, 0x48),
-@@ -292,8 +333,18 @@ static const struct spinand_info gigadev
- 					      &write_cache_variants,
- 					      &update_cache_variants),
- 		     SPINAND_HAS_QE_BIT,
--		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
- 				     gd5fxgq4ufxxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F1GQ5UExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x51),
-+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
-+		     NAND_ECCREQ(4, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq5xexxg_ecc_get_status)),
- };
- 
- static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {
diff --git a/target/linux/generic/backport-5.10/420-v5.19-01-mtd-spinand-gigadevice-fix-Quad-IO-for-GD5F1GQ5UExxG.patch b/target/linux/generic/backport-5.10/420-v5.19-01-mtd-spinand-gigadevice-fix-Quad-IO-for-GD5F1GQ5UExxG.patch
deleted file mode 100644
index 1b0b57c2b01b..000000000000
--- a/target/linux/generic/backport-5.10/420-v5.19-01-mtd-spinand-gigadevice-fix-Quad-IO-for-GD5F1GQ5UExxG.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From a4f9dd55c5e1bb951db6f1dee20e62e0103f3438 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Sun, 20 Mar 2022 17:59:57 +0800
-Subject: [PATCH 1/5] mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG
-
-Read From Cache Quad IO (EBH) uses 2 dummy bytes on this chip according
-to page 23 of the datasheet[0].
-
-[0]: https://www.gigadevice.com/datasheet/gd5f1gq5xexxg/
-
-Fixes: 469b99248985 ("mtd: spinand: gigadevice: Support GD5F1GQ5UExxG")
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-2-gch981213@gmail.com
----
- drivers/mtd/nand/spi/gigadevice.c | 10 +++++++++-
- 1 file changed, 9 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/nand/spi/gigadevice.c
-+++ b/drivers/mtd/nand/spi/gigadevice.c
-@@ -39,6 +39,14 @@ static SPINAND_OP_VARIANTS(read_cache_va
- 		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
- 		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
- 
-+static SPINAND_OP_VARIANTS(read_cache_variants_1gq5,
-+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-+
- static SPINAND_OP_VARIANTS(write_cache_variants,
- 		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
- 		SPINAND_PROG_LOAD(true, 0, NULL, 0));
-@@ -339,7 +347,7 @@ static const struct spinand_info gigadev
- 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x51),
- 		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
- 		     NAND_ECCREQ(4, 512),
--		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_1gq5,
- 					      &write_cache_variants,
- 					      &update_cache_variants),
- 		     SPINAND_HAS_QE_BIT,
diff --git a/target/linux/generic/backport-5.10/420-v5.19-02-mtd-spinand-gigadevice-add-support-for-GD5FxGQ4xExxG.patch b/target/linux/generic/backport-5.10/420-v5.19-02-mtd-spinand-gigadevice-add-support-for-GD5FxGQ4xExxG.patch
deleted file mode 100644
index 181c912fbfcf..000000000000
--- a/target/linux/generic/backport-5.10/420-v5.19-02-mtd-spinand-gigadevice-add-support-for-GD5FxGQ4xExxG.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 573eec222bc82fb5e724586267fbbb1aed9ffd03 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Sun, 20 Mar 2022 17:59:58 +0800
-Subject: [PATCH 2/5] mtd: spinand: gigadevice: add support for GD5FxGQ4xExxG
-
-Add support for:
- GD5F1GQ4RExxG
- GD5F2GQ4{U,R}ExxG
-
-These chips differ from GD5F1GQ4UExxG only in chip ID, voltage
-and capacity.
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-3-gch981213@gmail.com
----
- drivers/mtd/nand/spi/gigadevice.c | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/drivers/mtd/nand/spi/gigadevice.c
-+++ b/drivers/mtd/nand/spi/gigadevice.c
-@@ -333,6 +333,36 @@ static const struct spinand_info gigadev
- 		     SPINAND_HAS_QE_BIT,
- 		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
- 				     gd5fxgq4uexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F1GQ4RExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xc1),
-+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq4uexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F2GQ4UExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xd2),
-+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq4uexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F2GQ4RExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xc2),
-+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq4uexxg_ecc_get_status)),
- 	SPINAND_INFO("GD5F1GQ4UFxxG",
- 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE, 0xb1, 0x48),
- 		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
diff --git a/target/linux/generic/backport-5.10/420-v5.19-03-mtd-spinand-gigadevice-add-support-for-GD5F1GQ5RExxG.patch b/target/linux/generic/backport-5.10/420-v5.19-03-mtd-spinand-gigadevice-add-support-for-GD5F1GQ5RExxG.patch
deleted file mode 100644
index 3a1cc9efcfbc..000000000000
--- a/target/linux/generic/backport-5.10/420-v5.19-03-mtd-spinand-gigadevice-add-support-for-GD5F1GQ5RExxG.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 620a988813403318023296b61228ee8f3fcdb8e0 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Sun, 20 Mar 2022 17:59:59 +0800
-Subject: [PATCH 3/5] mtd: spinand: gigadevice: add support for GD5F1GQ5RExxG
-
-This chip is the 1.8v version of GD5F1GQ5UExxG.
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-4-gch981213@gmail.com
----
- drivers/mtd/nand/spi/gigadevice.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/nand/spi/gigadevice.c
-+++ b/drivers/mtd/nand/spi/gigadevice.c
-@@ -383,6 +383,16 @@ static const struct spinand_info gigadev
- 		     SPINAND_HAS_QE_BIT,
- 		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
- 				     gd5fxgq5xexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F1GQ5RExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x41),
-+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
-+		     NAND_ECCREQ(4, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_1gq5,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq5xexxg_ecc_get_status)),
- };
- 
- static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {
diff --git a/target/linux/generic/backport-5.10/420-v5.19-04-mtd-spinand-gigadevice-add-support-for-GD5F-2-4-GQ5x.patch b/target/linux/generic/backport-5.10/420-v5.19-04-mtd-spinand-gigadevice-add-support-for-GD5F-2-4-GQ5x.patch
deleted file mode 100644
index cee9d9db3eb4..000000000000
--- a/target/linux/generic/backport-5.10/420-v5.19-04-mtd-spinand-gigadevice-add-support-for-GD5F-2-4-GQ5x.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 194ec04b3a9e7fa97d1fbef296410631bc3cf1c8 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Sun, 20 Mar 2022 18:00:00 +0800
-Subject: [PATCH 4/5] mtd: spinand: gigadevice: add support for GD5F{2,
- 4}GQ5xExxG
-
-Add support for:
- GD5F2GQ5{U,R}ExxG
- GD5F4GQ6{U,R}ExxG
-
-These chips uses 4 dummy bytes for quad io and 2 dummy bytes for dual io.
-Besides that and memory layout, they are identical to their 1G variant.
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-5-gch981213@gmail.com
----
- drivers/mtd/nand/spi/gigadevice.c | 48 +++++++++++++++++++++++++++++++
- 1 file changed, 48 insertions(+)
-
---- a/drivers/mtd/nand/spi/gigadevice.c
-+++ b/drivers/mtd/nand/spi/gigadevice.c
-@@ -47,6 +47,14 @@ static SPINAND_OP_VARIANTS(read_cache_va
- 		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
- 		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
- 
-+static SPINAND_OP_VARIANTS(read_cache_variants_2gq5,
-+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 4, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 2, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-+
- static SPINAND_OP_VARIANTS(write_cache_variants,
- 		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
- 		SPINAND_PROG_LOAD(true, 0, NULL, 0));
-@@ -391,6 +399,46 @@ static const struct spinand_info gigadev
- 					      &write_cache_variants,
- 					      &update_cache_variants),
- 		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq5xexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F2GQ5UExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x52),
-+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(4, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_2gq5,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq5xexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F2GQ5RExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x42),
-+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(4, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_2gq5,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq5xexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F4GQ6UExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x55),
-+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 2, 1),
-+		     NAND_ECCREQ(4, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_2gq5,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq5xexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F4GQ6RExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x45),
-+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 2, 1),
-+		     NAND_ECCREQ(4, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_2gq5,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
- 		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
- 				     gd5fxgq5xexxg_ecc_get_status)),
- };
diff --git a/target/linux/generic/backport-5.10/420-v5.19-05-mtd-spinand-gigadevice-add-support-for-GD5FxGM7xExxG.patch b/target/linux/generic/backport-5.10/420-v5.19-05-mtd-spinand-gigadevice-add-support-for-GD5FxGM7xExxG.patch
deleted file mode 100644
index d63113e1a66f..000000000000
--- a/target/linux/generic/backport-5.10/420-v5.19-05-mtd-spinand-gigadevice-add-support-for-GD5FxGM7xExxG.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 54647cd003c08b714474a5b599a147ec6a160486 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Sun, 20 Mar 2022 18:00:01 +0800
-Subject: [PATCH 5/5] mtd: spinand: gigadevice: add support for GD5FxGM7xExxG
-
-Add support for:
- GD5F{1,2}GM7{U,R}ExxG
- GD5F4GM8{U,R}ExxG
-
-These are new 27nm counterparts for the GD5FxGQ4 chips from GigaDevice
-with 8b/512b on-die ECC capability.
-These chips (and currently supported GD5FxGQ5 chips) have QIO DTR
-instruction for reading page cache. It isn't added in this patch because
-I don't have a DTR spi controller for testing.
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-6-gch981213@gmail.com
----
- drivers/mtd/nand/spi/gigadevice.c | 60 +++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/drivers/mtd/nand/spi/gigadevice.c
-+++ b/drivers/mtd/nand/spi/gigadevice.c
-@@ -441,6 +441,66 @@ static const struct spinand_info gigadev
- 		     SPINAND_HAS_QE_BIT,
- 		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
- 				     gd5fxgq5xexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F1GM7UExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x91),
-+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_1gq5,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq4uexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F1GM7RExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x81),
-+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_1gq5,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq4uexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F2GM7UExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x92),
-+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_1gq5,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq4uexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F2GM7RExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x82),
-+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_1gq5,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq4uexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F4GM8UExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x95),
-+		     NAND_MEMORG(1, 2048, 128, 64, 4096, 80, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_1gq5,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq4uexxg_ecc_get_status)),
-+	SPINAND_INFO("GD5F4GM8RExxG",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x85),
-+		     NAND_MEMORG(1, 2048, 128, 64, 4096, 80, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_1gq5,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
-+				     gd5fxgq4uexxg_ecc_get_status)),
- };
- 
- static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {
diff --git a/target/linux/generic/backport-5.10/421-v6.2-mtd-parsers-add-TP-Link-SafeLoader-partitions-table-.patch b/target/linux/generic/backport-5.10/421-v6.2-mtd-parsers-add-TP-Link-SafeLoader-partitions-table-.patch
deleted file mode 100644
index 9f543365a572..000000000000
--- a/target/linux/generic/backport-5.10/421-v6.2-mtd-parsers-add-TP-Link-SafeLoader-partitions-table-.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-From aec4d5f5ffd0f0092bd9dc21ea90e0bc237d4b74 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 15 Oct 2022 11:29:50 +0200
-Subject: [PATCH] mtd: parsers: add TP-Link SafeLoader partitions table parser
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This parser deals with most TP-Link home routers. It reads info about
-partitions and registers them in the MTD subsystem.
-
-Example from TP-Link Archer C5 V2:
-
-spi-nor spi0.0: s25fl128s1 (16384 Kbytes)
-15 tplink-safeloader partitions found on MTD device spi0.0
-Creating 15 MTD partitions on "spi0.0":
-0x000000000000-0x000000040000 : "fs-uboot"
-0x000000040000-0x000000440000 : "os-image"
-0x000000440000-0x000000e40000 : "rootfs"
-0x000000e40000-0x000000e40200 : "default-mac"
-0x000000e40200-0x000000e40400 : "pin"
-0x000000e40400-0x000000e40600 : "product-info"
-0x000000e50000-0x000000e60000 : "partition-table"
-0x000000e60000-0x000000e60200 : "soft-version"
-0x000000e61000-0x000000e70000 : "support-list"
-0x000000e70000-0x000000e80000 : "profile"
-0x000000e80000-0x000000e90000 : "default-config"
-0x000000e90000-0x000000ee0000 : "user-config"
-0x000000ee0000-0x000000fe0000 : "log"
-0x000000fe0000-0x000000ff0000 : "radio_bk"
-0x000000ff0000-0x000001000000 : "radio"
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20221015092950.27467-2-zajec5@gmail.com
----
- drivers/mtd/parsers/Kconfig             |  15 +++
- drivers/mtd/parsers/Makefile            |   1 +
- drivers/mtd/parsers/tplink_safeloader.c | 150 ++++++++++++++++++++++++
- 3 files changed, 166 insertions(+)
- create mode 100644 drivers/mtd/parsers/tplink_safeloader.c
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -113,6 +113,21 @@ config MTD_AFS_PARTS
- 	  for your particular device. It won't happen automatically. The
- 	  'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
- 
-+config MTD_PARSER_TPLINK_SAFELOADER
-+	tristate "TP-Link Safeloader partitions parser"
-+	depends on MTD && (ARCH_BCM_5301X || ATH79 || SOC_MT7620 || SOC_MT7621 || COMPILE_TEST)
-+	help
-+	  TP-Link home routers use flash partitions to store various data. Info
-+	  about flash space layout is stored in a partitions table using a
-+	  custom ASCII-based format.
-+
-+	  That format was first found in devices with SafeLoader bootloader and
-+	  was named after it. Later it was adapted to CFE and U-Boot
-+	  bootloaders.
-+
-+	  This driver reads partitions table, parses it and creates MTD
-+	  partitions.
-+
- config MTD_PARSER_TRX
- 	tristate "Parser for TRX format partitions"
- 	depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || RALINK || COMPILE_TEST)
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -9,6 +9,7 @@ ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908)	+=
- ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o
- obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
- obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
-+obj-$(CONFIG_MTD_PARSER_TPLINK_SAFELOADER)	+= tplink_safeloader.o
- obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
- obj-$(CONFIG_MTD_SERCOMM_PARTS)		+= scpart.o
- obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
---- /dev/null
-+++ b/drivers/mtd/parsers/tplink_safeloader.c
-@@ -0,0 +1,150 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright © 2022 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of.h>
-+#include <linux/slab.h>
-+
-+#define TPLINK_SAFELOADER_DATA_OFFSET		4
-+#define TPLINK_SAFELOADER_MAX_PARTS		32
-+
-+struct safeloader_cmn_header {
-+	__be32 size;
-+	uint32_t unused;
-+} __packed;
-+
-+static void *mtd_parser_tplink_safeloader_read_table(struct mtd_info *mtd)
-+{
-+	struct safeloader_cmn_header hdr;
-+	struct device_node *np;
-+	size_t bytes_read;
-+	size_t offset;
-+	size_t size;
-+	char *buf;
-+	int err;
-+
-+	np = mtd_get_of_node(mtd);
-+	if (mtd_is_partition(mtd))
-+		of_node_get(np);
-+	else
-+		np = of_get_child_by_name(np, "partitions");
-+
-+	if (of_property_read_u32(np, "partitions-table-offset", (u32 *)&offset)) {
-+		pr_err("Failed to get partitions table offset\n");
-+		goto err_put;
-+	}
-+
-+	err = mtd_read(mtd, offset, sizeof(hdr), &bytes_read, (uint8_t *)&hdr);
-+	if (err && !mtd_is_bitflip(err)) {
-+		pr_err("Failed to read from %s at 0x%zx\n", mtd->name, offset);
-+		goto err_put;
-+	}
-+
-+	size = be32_to_cpu(hdr.size);
-+
-+	buf = kmalloc(size + 1, GFP_KERNEL);
-+	if (!buf)
-+		goto err_put;
-+
-+	err = mtd_read(mtd, offset + sizeof(hdr), size, &bytes_read, buf);
-+	if (err && !mtd_is_bitflip(err)) {
-+		pr_err("Failed to read from %s at 0x%zx\n", mtd->name, offset + sizeof(hdr));
-+		goto err_kfree;
-+	}
-+
-+	buf[size] = '\0';
-+
-+	of_node_put(np);
-+
-+	return buf;
-+
-+err_kfree:
-+	kfree(buf);
-+err_put:
-+	of_node_put(np);
-+	return NULL;
-+}
-+
-+static int mtd_parser_tplink_safeloader_parse(struct mtd_info *mtd,
-+					      const struct mtd_partition **pparts,
-+					      struct mtd_part_parser_data *data)
-+{
-+	struct mtd_partition *parts;
-+	char name[65];
-+	size_t offset;
-+	size_t bytes;
-+	char *buf;
-+	int idx;
-+	int err;
-+
-+	parts = kcalloc(TPLINK_SAFELOADER_MAX_PARTS, sizeof(*parts), GFP_KERNEL);
-+	if (!parts) {
-+		err = -ENOMEM;
-+		goto err_out;
-+	}
-+
-+	buf = mtd_parser_tplink_safeloader_read_table(mtd);
-+	if (!buf) {
-+		err = -ENOENT;
-+		goto err_out;
-+	}
-+
-+	for (idx = 0, offset = TPLINK_SAFELOADER_DATA_OFFSET;
-+	     idx < TPLINK_SAFELOADER_MAX_PARTS &&
-+	     sscanf(buf + offset, "partition %64s base 0x%llx size 0x%llx%zn\n",
-+		    name, &parts[idx].offset, &parts[idx].size, &bytes) == 3;
-+	     idx++, offset += bytes + 1) {
-+		parts[idx].name = kstrdup(name, GFP_KERNEL);
-+		if (!parts[idx].name) {
-+			err = -ENOMEM;
-+			goto err_free;
-+		}
-+	}
-+
-+	if (idx == TPLINK_SAFELOADER_MAX_PARTS)
-+		pr_warn("Reached maximum number of partitions!\n");
-+
-+	kfree(buf);
-+
-+	*pparts = parts;
-+
-+	return idx;
-+
-+err_free:
-+	for (idx -= 1; idx >= 0; idx--)
-+		kfree(parts[idx].name);
-+err_out:
-+	return err;
-+};
-+
-+static void mtd_parser_tplink_safeloader_cleanup(const struct mtd_partition *pparts,
-+						 int nr_parts)
-+{
-+	int i;
-+
-+	for (i = 0; i < nr_parts; i++)
-+		kfree(pparts[i].name);
-+
-+	kfree(pparts);
-+}
-+
-+static const struct of_device_id mtd_parser_tplink_safeloader_of_match_table[] = {
-+	{ .compatible = "tplink,safeloader-partitions" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, mtd_parser_tplink_safeloader_of_match_table);
-+
-+static struct mtd_part_parser mtd_parser_tplink_safeloader = {
-+	.parse_fn = mtd_parser_tplink_safeloader_parse,
-+	.cleanup = mtd_parser_tplink_safeloader_cleanup,
-+	.name = "tplink-safeloader",
-+	.of_match_table = mtd_parser_tplink_safeloader_of_match_table,
-+};
-+module_mtd_part_parser(mtd_parser_tplink_safeloader);
-+
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-5.10/422-v5.19-mtd-spi-nor-support-eon-en25qh256a.patch b/target/linux/generic/backport-5.10/422-v5.19-mtd-spi-nor-support-eon-en25qh256a.patch
deleted file mode 100644
index 2358352e93c9..000000000000
--- a/target/linux/generic/backport-5.10/422-v5.19-mtd-spi-nor-support-eon-en25qh256a.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 6abef37d16d0c570ef5a149e63762fba2a30804b Mon Sep 17 00:00:00 2001
-From: "Leon M. George" <leon@georgemail.eu>
-Date: Wed, 30 Mar 2022 16:16:56 +0200
-Subject: [PATCH] mtd: spi-nor: support eon en25qh256a variant
-
-The EN25QH256A variant of the EN25QH256 doesn't initialize correctly from SFDP
-alone and only accesses memory below 8m (addr_width is 4 but read_opcode takes
-only 3 bytes).
-
-Set SNOR_F_4B_OPCODES if the flash chip variant was detected using hwcaps.
-
-The fix submitted upstream uses the PARSE_SFDP initializer that is not
-available in the kernel used with Openwrt.
-
-Signed-off-by: Leon M. George <leon@georgemail.eu>
----
- drivers/mtd/spi-nor/eon.c | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/drivers/mtd/spi-nor/eon.c
-+++ b/drivers/mtd/spi-nor/eon.c
-@@ -8,6 +8,16 @@
- 
- #include "core.h"
- 
-+static void en25qh256_post_sfdp_fixups(struct spi_nor *nor)
-+{
-+	if (nor->params->hwcaps.mask & SNOR_HWCAPS_READ_1_1_4)
-+		nor->flags |= SNOR_F_4B_OPCODES;
-+}
-+
-+static const struct spi_nor_fixups en25qh256_fixups = {
-+	.post_sfdp = en25qh256_post_sfdp_fixups,
-+};
-+
- static const struct flash_info eon_parts[] = {
- 	/* EON -- en25xxx */
- 	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64, SECT_4K) },
-@@ -23,7 +33,9 @@ static const struct flash_info eon_parts
- 	{ "en25qh64",   INFO(0x1c7017, 0, 64 * 1024,  128,
- 			     SECT_4K | SPI_NOR_DUAL_READ) },
- 	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
--	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
-+	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512,
-+		SPI_NOR_DUAL_READ)
-+		.fixups = &en25qh256_fixups },
- 	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128, SECT_4K) },
- };
- 
diff --git a/target/linux/generic/backport-5.10/500-v5.13-ubifs-default-to-zstd-compression.patch b/target/linux/generic/backport-5.10/500-v5.13-ubifs-default-to-zstd-compression.patch
deleted file mode 100644
index dd50c19c2758..000000000000
--- a/target/linux/generic/backport-5.10/500-v5.13-ubifs-default-to-zstd-compression.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From dcdf415b740923530dc71d89fecc8361078473f5 Mon Sep 17 00:00:00 2001
-From: Rui Salvaterra <rsalvaterra@gmail.com>
-Date: Mon, 5 Apr 2021 16:11:55 +0100
-Subject: [PATCH] ubifs: default to zstd compression
-
-Compared to lzo and zlib, zstd is the best all-around performer, both in terms
-of speed and compression ratio. Set it as the default, if available.
-
-Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
----
- fs/ubifs/sb.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/fs/ubifs/sb.c
-+++ b/fs/ubifs/sb.c
-@@ -53,6 +53,9 @@
- 
- static int get_default_compressor(struct ubifs_info *c)
- {
-+	if (ubifs_compr_present(c, UBIFS_COMPR_ZSTD))
-+		return UBIFS_COMPR_ZSTD;
-+
- 	if (ubifs_compr_present(c, UBIFS_COMPR_LZO))
- 		return UBIFS_COMPR_LZO;
- 
diff --git a/target/linux/generic/backport-5.10/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch b/target/linux/generic/backport-5.10/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch
deleted file mode 100644
index 7d732935321d..000000000000
--- a/target/linux/generic/backport-5.10/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 8 Feb 2021 11:34:08 -0800
-Subject: [PATCH] net: extract napi poll functionality to __napi_poll()
-
-This commit introduces a new function __napi_poll() which does the main
-logic of the existing napi_poll() function, and will be called by other
-functions in later commits.
-This idea and implementation is done by Felix Fietkau <nbd@nbd.name> and
-is proposed as part of the patch to move napi work to work_queue
-context.
-This commit by itself is a code restructure.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Wei Wang <weiwan@google.com>
-Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -6813,15 +6813,10 @@ void __netif_napi_del(struct napi_struct
- }
- EXPORT_SYMBOL(__netif_napi_del);
- 
--static int napi_poll(struct napi_struct *n, struct list_head *repoll)
-+static int __napi_poll(struct napi_struct *n, bool *repoll)
- {
--	void *have;
- 	int work, weight;
- 
--	list_del_init(&n->poll_list);
--
--	have = netpoll_poll_lock(n);
--
- 	weight = n->weight;
- 
- 	/* This NAPI_STATE_SCHED test is for avoiding a race
-@@ -6841,7 +6836,7 @@ static int napi_poll(struct napi_struct
- 			    n->poll, work, weight);
- 
- 	if (likely(work < weight))
--		goto out_unlock;
-+		return work;
- 
- 	/* Drivers must not modify the NAPI state if they
- 	 * consume the entire weight.  In such cases this code
-@@ -6850,7 +6845,7 @@ static int napi_poll(struct napi_struct
- 	 */
- 	if (unlikely(napi_disable_pending(n))) {
- 		napi_complete(n);
--		goto out_unlock;
-+		return work;
- 	}
- 
- 	if (n->gro_bitmask) {
-@@ -6868,12 +6863,29 @@ static int napi_poll(struct napi_struct
- 	if (unlikely(!list_empty(&n->poll_list))) {
- 		pr_warn_once("%s: Budget exhausted after napi rescheduled\n",
- 			     n->dev ? n->dev->name : "backlog");
--		goto out_unlock;
-+		return work;
- 	}
- 
--	list_add_tail(&n->poll_list, repoll);
-+	*repoll = true;
-+
-+	return work;
-+}
-+
-+static int napi_poll(struct napi_struct *n, struct list_head *repoll)
-+{
-+	bool do_repoll = false;
-+	void *have;
-+	int work;
-+
-+	list_del_init(&n->poll_list);
-+
-+	have = netpoll_poll_lock(n);
-+
-+	work = __napi_poll(n, &do_repoll);
-+
-+	if (do_repoll)
-+		list_add_tail(&n->poll_list, repoll);
- 
--out_unlock:
- 	netpoll_poll_unlock(have);
- 
- 	return work;
diff --git a/target/linux/generic/backport-5.10/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch b/target/linux/generic/backport-5.10/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch
deleted file mode 100644
index 9d5fb6e20ca4..000000000000
--- a/target/linux/generic/backport-5.10/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch
+++ /dev/null
@@ -1,261 +0,0 @@
-From: Wei Wang <weiwan@google.com>
-Date: Mon, 8 Feb 2021 11:34:09 -0800
-Subject: [PATCH] net: implement threaded-able napi poll loop support
-
-This patch allows running each napi poll loop inside its own
-kernel thread.
-The kthread is created during netif_napi_add() if dev->threaded
-is set. And threaded mode is enabled in napi_enable(). We will
-provide a way to set dev->threaded and enable threaded mode
-without a device up/down in the following patch.
-
-Once that threaded mode is enabled and the kthread is
-started, napi_schedule() will wake-up such thread instead
-of scheduling the softirq.
-
-The threaded poll loop behaves quite likely the net_rx_action,
-but it does not have to manipulate local irqs and uses
-an explicit scheduling point based on netdev_budget.
-
-Co-developed-by: Paolo Abeni <pabeni@redhat.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-Co-developed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
-Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
-Co-developed-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Wei Wang <weiwan@google.com>
-Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -356,6 +356,7 @@ struct napi_struct {
- 	struct list_head	dev_list;
- 	struct hlist_node	napi_hash_node;
- 	unsigned int		napi_id;
-+	struct task_struct	*thread;
- };
- 
- enum {
-@@ -366,6 +367,7 @@ enum {
- 	NAPI_STATE_LISTED,	/* NAPI added to system lists */
- 	NAPI_STATE_NO_BUSY_POLL,/* Do not add in napi_hash, no busy polling */
- 	NAPI_STATE_IN_BUSY_POLL,/* sk_busy_loop() owns this NAPI */
-+	NAPI_STATE_THREADED,		/* The poll is performed inside its own thread*/
- };
- 
- enum {
-@@ -376,6 +378,7 @@ enum {
- 	NAPIF_STATE_LISTED	 = BIT(NAPI_STATE_LISTED),
- 	NAPIF_STATE_NO_BUSY_POLL = BIT(NAPI_STATE_NO_BUSY_POLL),
- 	NAPIF_STATE_IN_BUSY_POLL = BIT(NAPI_STATE_IN_BUSY_POLL),
-+	NAPIF_STATE_THREADED	 = BIT(NAPI_STATE_THREADED),
- };
- 
- enum gro_result {
-@@ -506,20 +509,7 @@ static inline bool napi_complete(struct
-  */
- void napi_disable(struct napi_struct *n);
- 
--/**
-- *	napi_enable - enable NAPI scheduling
-- *	@n: NAPI context
-- *
-- * Resume NAPI from being scheduled on this context.
-- * Must be paired with napi_disable.
-- */
--static inline void napi_enable(struct napi_struct *n)
--{
--	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
--	smp_mb__before_atomic();
--	clear_bit(NAPI_STATE_SCHED, &n->state);
--	clear_bit(NAPI_STATE_NPSVC, &n->state);
--}
-+void napi_enable(struct napi_struct *n);
- 
- /**
-  *	napi_synchronize - wait until NAPI is not running
-@@ -1865,6 +1855,8 @@ enum netdev_ml_priv_type {
-  *
-  *	@wol_enabled:	Wake-on-LAN is enabled
-  *
-+ *	@threaded:	napi threaded mode is enabled
-+ *
-  *	@net_notifier_list:	List of per-net netdev notifier block
-  *				that follow this device when it is moved
-  *				to another network namespace.
-@@ -2184,6 +2176,7 @@ struct net_device {
- 	struct lock_class_key	*qdisc_running_key;
- 	bool			proto_down;
- 	unsigned		wol_enabled:1;
-+	unsigned		threaded:1;
- 
- 	struct list_head	net_notifier_list;
- 
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -91,6 +91,7 @@
- #include <linux/etherdevice.h>
- #include <linux/ethtool.h>
- #include <linux/skbuff.h>
-+#include <linux/kthread.h>
- #include <linux/bpf.h>
- #include <linux/bpf_trace.h>
- #include <net/net_namespace.h>
-@@ -1500,6 +1501,27 @@ void netdev_notify_peers(struct net_devi
- }
- EXPORT_SYMBOL(netdev_notify_peers);
- 
-+static int napi_threaded_poll(void *data);
-+
-+static int napi_kthread_create(struct napi_struct *n)
-+{
-+	int err = 0;
-+
-+	/* Create and wake up the kthread once to put it in
-+	 * TASK_INTERRUPTIBLE mode to avoid the blocked task
-+	 * warning and work with loadavg.
-+	 */
-+	n->thread = kthread_run(napi_threaded_poll, n, "napi/%s-%d",
-+				n->dev->name, n->napi_id);
-+	if (IS_ERR(n->thread)) {
-+		err = PTR_ERR(n->thread);
-+		pr_err("kthread_run failed with err %d\n", err);
-+		n->thread = NULL;
-+	}
-+
-+	return err;
-+}
-+
- static int __dev_open(struct net_device *dev, struct netlink_ext_ack *extack)
- {
- 	const struct net_device_ops *ops = dev->netdev_ops;
-@@ -4274,6 +4296,21 @@ int gro_normal_batch __read_mostly = 8;
- static inline void ____napi_schedule(struct softnet_data *sd,
- 				     struct napi_struct *napi)
- {
-+	struct task_struct *thread;
-+
-+	if (test_bit(NAPI_STATE_THREADED, &napi->state)) {
-+		/* Paired with smp_mb__before_atomic() in
-+		 * napi_enable(). Use READ_ONCE() to guarantee
-+		 * a complete read on napi->thread. Only call
-+		 * wake_up_process() when it's not NULL.
-+		 */
-+		thread = READ_ONCE(napi->thread);
-+		if (thread) {
-+			wake_up_process(thread);
-+			return;
-+		}
-+	}
-+
- 	list_add_tail(&napi->poll_list, &sd->poll_list);
- 	__raise_softirq_irqoff(NET_RX_SOFTIRQ);
- }
-@@ -6766,6 +6803,12 @@ void netif_napi_add(struct net_device *d
- 	set_bit(NAPI_STATE_NPSVC, &napi->state);
- 	list_add_rcu(&napi->dev_list, &dev->napi_list);
- 	napi_hash_add(napi);
-+	/* Create kthread for this napi if dev->threaded is set.
-+	 * Clear dev->threaded if kthread creation failed so that
-+	 * threaded mode will not be enabled in napi_enable().
-+	 */
-+	if (dev->threaded && napi_kthread_create(napi))
-+		dev->threaded = 0;
- }
- EXPORT_SYMBOL(netif_napi_add);
- 
-@@ -6782,9 +6825,28 @@ void napi_disable(struct napi_struct *n)
- 	hrtimer_cancel(&n->timer);
- 
- 	clear_bit(NAPI_STATE_DISABLE, &n->state);
-+	clear_bit(NAPI_STATE_THREADED, &n->state);
- }
- EXPORT_SYMBOL(napi_disable);
- 
-+/**
-+ *	napi_enable - enable NAPI scheduling
-+ *	@n: NAPI context
-+ *
-+ * Resume NAPI from being scheduled on this context.
-+ * Must be paired with napi_disable.
-+ */
-+void napi_enable(struct napi_struct *n)
-+{
-+	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
-+	smp_mb__before_atomic();
-+	clear_bit(NAPI_STATE_SCHED, &n->state);
-+	clear_bit(NAPI_STATE_NPSVC, &n->state);
-+	if (n->dev->threaded && n->thread)
-+		set_bit(NAPI_STATE_THREADED, &n->state);
-+}
-+EXPORT_SYMBOL(napi_enable);
-+
- static void flush_gro_hash(struct napi_struct *napi)
- {
- 	int i;
-@@ -6810,6 +6872,11 @@ void __netif_napi_del(struct napi_struct
- 
- 	flush_gro_hash(napi);
- 	napi->gro_bitmask = 0;
-+
-+	if (napi->thread) {
-+		kthread_stop(napi->thread);
-+		napi->thread = NULL;
-+	}
- }
- EXPORT_SYMBOL(__netif_napi_del);
- 
-@@ -6891,6 +6958,51 @@ static int napi_poll(struct napi_struct
- 	return work;
- }
- 
-+static int napi_thread_wait(struct napi_struct *napi)
-+{
-+	set_current_state(TASK_INTERRUPTIBLE);
-+
-+	while (!kthread_should_stop() && !napi_disable_pending(napi)) {
-+		if (test_bit(NAPI_STATE_SCHED, &napi->state)) {
-+			WARN_ON(!list_empty(&napi->poll_list));
-+			__set_current_state(TASK_RUNNING);
-+			return 0;
-+		}
-+
-+		schedule();
-+		set_current_state(TASK_INTERRUPTIBLE);
-+	}
-+	__set_current_state(TASK_RUNNING);
-+	return -1;
-+}
-+
-+static int napi_threaded_poll(void *data)
-+{
-+	struct napi_struct *napi = data;
-+	void *have;
-+
-+	while (!napi_thread_wait(napi)) {
-+		for (;;) {
-+			bool repoll = false;
-+
-+			local_bh_disable();
-+
-+			have = netpoll_poll_lock(napi);
-+			__napi_poll(napi, &repoll);
-+			netpoll_poll_unlock(have);
-+
-+			__kfree_skb_flush();
-+			local_bh_enable();
-+
-+			if (!repoll)
-+				break;
-+
-+			cond_resched();
-+		}
-+	}
-+	return 0;
-+}
-+
- static __latent_entropy void net_rx_action(struct softirq_action *h)
- {
- 	struct softnet_data *sd = this_cpu_ptr(&softnet_data);
diff --git a/target/linux/generic/backport-5.10/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch b/target/linux/generic/backport-5.10/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch
deleted file mode 100644
index 05d5f59f8072..000000000000
--- a/target/linux/generic/backport-5.10/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch
+++ /dev/null
@@ -1,177 +0,0 @@
-From: Wei Wang <weiwan@google.com>
-Date: Mon, 8 Feb 2021 11:34:10 -0800
-Subject: [PATCH] net: add sysfs attribute to control napi threaded mode
-
-This patch adds a new sysfs attribute to the network device class.
-Said attribute provides a per-device control to enable/disable the
-threaded mode for all the napi instances of the given network device,
-without the need for a device up/down.
-User sets it to 1 or 0 to enable or disable threaded mode.
-Note: when switching between threaded and the current softirq based mode
-for a napi instance, it will not immediately take effect if the napi is
-currently being polled. The mode switch will happen for the next time
-napi_schedule() is called.
-
-Co-developed-by: Paolo Abeni <pabeni@redhat.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-Co-developed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
-Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
-Co-developed-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Wei Wang <weiwan@google.com>
-Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/Documentation/ABI/testing/sysfs-class-net
-+++ b/Documentation/ABI/testing/sysfs-class-net
-@@ -337,3 +337,18 @@ Contact:	netdev@vger.kernel.org
- Description:
- 		32-bit unsigned integer counting the number of times the link has
- 		been down
-+
-+What:		/sys/class/net/<iface>/threaded
-+Date:		Jan 2021
-+KernelVersion:	5.12
-+Contact:	netdev@vger.kernel.org
-+Description:
-+		Boolean value to control the threaded mode per device. User could
-+		set this value to enable/disable threaded mode for all napi
-+		belonging to this device, without the need to do device up/down.
-+
-+		Possible values:
-+		== ==================================
-+		0  threaded mode disabled for this dev
-+		1  threaded mode enabled for this dev
-+		== ==================================
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -500,6 +500,8 @@ static inline bool napi_complete(struct
- 	return napi_complete_done(n, 0);
- }
- 
-+int dev_set_threaded(struct net_device *dev, bool threaded);
-+
- /**
-  *	napi_disable - prevent NAPI from scheduling
-  *	@n: NAPI context
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -4300,8 +4300,9 @@ static inline void ____napi_schedule(str
- 
- 	if (test_bit(NAPI_STATE_THREADED, &napi->state)) {
- 		/* Paired with smp_mb__before_atomic() in
--		 * napi_enable(). Use READ_ONCE() to guarantee
--		 * a complete read on napi->thread. Only call
-+		 * napi_enable()/dev_set_threaded().
-+		 * Use READ_ONCE() to guarantee a complete
-+		 * read on napi->thread. Only call
- 		 * wake_up_process() when it's not NULL.
- 		 */
- 		thread = READ_ONCE(napi->thread);
-@@ -6776,6 +6777,49 @@ static void init_gro_hash(struct napi_st
- 	napi->gro_bitmask = 0;
- }
- 
-+int dev_set_threaded(struct net_device *dev, bool threaded)
-+{
-+	struct napi_struct *napi;
-+	int err = 0;
-+
-+	if (dev->threaded == threaded)
-+		return 0;
-+
-+	if (threaded) {
-+		list_for_each_entry(napi, &dev->napi_list, dev_list) {
-+			if (!napi->thread) {
-+				err = napi_kthread_create(napi);
-+				if (err) {
-+					threaded = false;
-+					break;
-+				}
-+			}
-+		}
-+	}
-+
-+	dev->threaded = threaded;
-+
-+	/* Make sure kthread is created before THREADED bit
-+	 * is set.
-+	 */
-+	smp_mb__before_atomic();
-+
-+	/* Setting/unsetting threaded mode on a napi might not immediately
-+	 * take effect, if the current napi instance is actively being
-+	 * polled. In this case, the switch between threaded mode and
-+	 * softirq mode will happen in the next round of napi_schedule().
-+	 * This should not cause hiccups/stalls to the live traffic.
-+	 */
-+	list_for_each_entry(napi, &dev->napi_list, dev_list) {
-+		if (threaded)
-+			set_bit(NAPI_STATE_THREADED, &napi->state);
-+		else
-+			clear_bit(NAPI_STATE_THREADED, &napi->state);
-+	}
-+
-+	return err;
-+}
-+
- void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
- 		    int (*poll)(struct napi_struct *, int), int weight)
- {
---- a/net/core/net-sysfs.c
-+++ b/net/core/net-sysfs.c
-@@ -587,6 +587,45 @@ static ssize_t phys_switch_id_show(struc
- }
- static DEVICE_ATTR_RO(phys_switch_id);
- 
-+static ssize_t threaded_show(struct device *dev,
-+			     struct device_attribute *attr, char *buf)
-+{
-+	struct net_device *netdev = to_net_dev(dev);
-+	ssize_t ret = -EINVAL;
-+
-+	if (!rtnl_trylock())
-+		return restart_syscall();
-+
-+	if (dev_isalive(netdev))
-+		ret = sprintf(buf, fmt_dec, netdev->threaded);
-+
-+	rtnl_unlock();
-+	return ret;
-+}
-+
-+static int modify_napi_threaded(struct net_device *dev, unsigned long val)
-+{
-+	int ret;
-+
-+	if (list_empty(&dev->napi_list))
-+		return -EOPNOTSUPP;
-+
-+	if (val != 0 && val != 1)
-+		return -EOPNOTSUPP;
-+
-+	ret = dev_set_threaded(dev, val);
-+
-+	return ret;
-+}
-+
-+static ssize_t threaded_store(struct device *dev,
-+			      struct device_attribute *attr,
-+			      const char *buf, size_t len)
-+{
-+	return netdev_store(dev, attr, buf, len, modify_napi_threaded);
-+}
-+static DEVICE_ATTR_RW(threaded);
-+
- static struct attribute *net_class_attrs[] __ro_after_init = {
- 	&dev_attr_netdev_group.attr,
- 	&dev_attr_type.attr,
-@@ -619,6 +658,7 @@ static struct attribute *net_class_attrs
- 	&dev_attr_proto_down.attr,
- 	&dev_attr_carrier_up_count.attr,
- 	&dev_attr_carrier_down_count.attr,
-+	&dev_attr_threaded.attr,
- 	NULL,
- };
- ATTRIBUTE_GROUPS(net_class);
diff --git a/target/linux/generic/backport-5.10/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch b/target/linux/generic/backport-5.10/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch
deleted file mode 100644
index b83078d51c7b..000000000000
--- a/target/linux/generic/backport-5.10/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From: Wei Wang <weiwan@google.com>
-Date: Mon, 1 Mar 2021 17:21:13 -0800
-Subject: [PATCH] net: fix race between napi kthread mode and busy poll
-
-Currently, napi_thread_wait() checks for NAPI_STATE_SCHED bit to
-determine if the kthread owns this napi and could call napi->poll() on
-it. However, if socket busy poll is enabled, it is possible that the
-busy poll thread grabs this SCHED bit (after the previous napi->poll()
-invokes napi_complete_done() and clears SCHED bit) and tries to poll
-on the same napi. napi_disable() could grab the SCHED bit as well.
-This patch tries to fix this race by adding a new bit
-NAPI_STATE_SCHED_THREADED in napi->state. This bit gets set in
-____napi_schedule() if the threaded mode is enabled, and gets cleared
-in napi_complete_done(), and we only poll the napi in kthread if this
-bit is set. This helps distinguish the ownership of the napi between
-kthread and other scenarios and fixes the race issue.
-
-Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
-Reported-by: Martin Zaharinov <micron10@gmail.com>
-Suggested-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Wei Wang <weiwan@google.com>
-Cc: Alexander Duyck <alexanderduyck@fb.com>
-Cc: Eric Dumazet <edumazet@google.com>
-Cc: Paolo Abeni <pabeni@redhat.com>
-Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -368,6 +368,7 @@ enum {
- 	NAPI_STATE_NO_BUSY_POLL,/* Do not add in napi_hash, no busy polling */
- 	NAPI_STATE_IN_BUSY_POLL,/* sk_busy_loop() owns this NAPI */
- 	NAPI_STATE_THREADED,		/* The poll is performed inside its own thread*/
-+	NAPI_STATE_SCHED_THREADED,	/* Napi is currently scheduled in threaded mode */
- };
- 
- enum {
-@@ -379,6 +380,7 @@ enum {
- 	NAPIF_STATE_NO_BUSY_POLL = BIT(NAPI_STATE_NO_BUSY_POLL),
- 	NAPIF_STATE_IN_BUSY_POLL = BIT(NAPI_STATE_IN_BUSY_POLL),
- 	NAPIF_STATE_THREADED	 = BIT(NAPI_STATE_THREADED),
-+	NAPIF_STATE_SCHED_THREADED	= BIT(NAPI_STATE_SCHED_THREADED),
- };
- 
- enum gro_result {
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -4307,6 +4307,8 @@ static inline void ____napi_schedule(str
- 		 */
- 		thread = READ_ONCE(napi->thread);
- 		if (thread) {
-+			if (thread->state != TASK_INTERRUPTIBLE)
-+				set_bit(NAPI_STATE_SCHED_THREADED, &napi->state);
- 			wake_up_process(thread);
- 			return;
- 		}
-@@ -6568,7 +6570,8 @@ bool napi_complete_done(struct napi_stru
- 
- 		WARN_ON_ONCE(!(val & NAPIF_STATE_SCHED));
- 
--		new = val & ~(NAPIF_STATE_MISSED | NAPIF_STATE_SCHED);
-+		new = val & ~(NAPIF_STATE_MISSED | NAPIF_STATE_SCHED |
-+			      NAPIF_STATE_SCHED_THREADED);
- 
- 		/* If STATE_MISSED was set, leave STATE_SCHED set,
- 		 * because we will call napi->poll() one more time.
-@@ -7004,16 +7007,25 @@ static int napi_poll(struct napi_struct
- 
- static int napi_thread_wait(struct napi_struct *napi)
- {
-+	bool woken = false;
-+
- 	set_current_state(TASK_INTERRUPTIBLE);
- 
- 	while (!kthread_should_stop() && !napi_disable_pending(napi)) {
--		if (test_bit(NAPI_STATE_SCHED, &napi->state)) {
-+		/* Testing SCHED_THREADED bit here to make sure the current
-+		 * kthread owns this napi and could poll on this napi.
-+		 * Testing SCHED bit is not enough because SCHED bit might be
-+		 * set by some other busy poll thread or by napi_disable().
-+		 */
-+		if (test_bit(NAPI_STATE_SCHED_THREADED, &napi->state) || woken) {
- 			WARN_ON(!list_empty(&napi->poll_list));
- 			__set_current_state(TASK_RUNNING);
- 			return 0;
- 		}
- 
- 		schedule();
-+		/* woken being true indicates this thread owns this napi. */
-+		woken = true;
- 		set_current_state(TASK_INTERRUPTIBLE);
- 	}
- 	__set_current_state(TASK_RUNNING);
diff --git a/target/linux/generic/backport-5.10/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch b/target/linux/generic/backport-5.10/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch
deleted file mode 100644
index bf6fd25ac19e..000000000000
--- a/target/linux/generic/backport-5.10/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: Paolo Abeni <pabeni@redhat.com>
-Date: Fri, 9 Apr 2021 17:24:17 +0200
-Subject: [PATCH] net: fix hangup on napi_disable for threaded napi
-
-napi_disable() is subject to an hangup, when the threaded
-mode is enabled and the napi is under heavy traffic.
-
-If the relevant napi has been scheduled and the napi_disable()
-kicks in before the next napi_threaded_wait() completes - so
-that the latter quits due to the napi_disable_pending() condition,
-the existing code leaves the NAPI_STATE_SCHED bit set and the
-napi_disable() loop waiting for such bit will hang.
-
-This patch addresses the issue by dropping the NAPI_STATE_DISABLE
-bit test in napi_thread_wait(). The later napi_threaded_poll()
-iteration will take care of clearing the NAPI_STATE_SCHED.
-
-This also addresses a related problem reported by Jakub:
-before this patch a napi_disable()/napi_enable() pair killed
-the napi thread, effectively disabling the threaded mode.
-On the patched kernel napi_disable() simply stops scheduling
-the relevant thread.
-
-v1 -> v2:
-  - let the main napi_thread_poll() loop clear the SCHED bit
-
-Reported-by: Jakub Kicinski <kuba@kernel.org>
-Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-Reviewed-by: Eric Dumazet <edumazet@google.com>
-Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -7011,7 +7011,7 @@ static int napi_thread_wait(struct napi_
- 
- 	set_current_state(TASK_INTERRUPTIBLE);
- 
--	while (!kthread_should_stop() && !napi_disable_pending(napi)) {
-+	while (!kthread_should_stop()) {
- 		/* Testing SCHED_THREADED bit here to make sure the current
- 		 * kthread owns this napi and could poll on this napi.
- 		 * Testing SCHED bit is not enough because SCHED bit might be
-@@ -7029,6 +7029,7 @@ static int napi_thread_wait(struct napi_
- 		set_current_state(TASK_INTERRUPTIBLE);
- 	}
- 	__set_current_state(TASK_RUNNING);
-+
- 	return -1;
- }
- 
diff --git a/target/linux/generic/backport-5.10/605-v5.12-net-export-dev_set_threaded-symbol.patch b/target/linux/generic/backport-5.10/605-v5.12-net-export-dev_set_threaded-symbol.patch
deleted file mode 100644
index 2d9c1875cec0..000000000000
--- a/target/linux/generic/backport-5.10/605-v5.12-net-export-dev_set_threaded-symbol.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sun, 14 Mar 2021 15:49:19 +0100
-Subject: [PATCH] net: export dev_set_threaded symbol
-
-For wireless devices (e.g. mt76 driver) multiple net_devices belongs to
-the same wireless phy and the napi object is registered in a dummy
-netdevice related to the wireless phy.
-Export dev_set_threaded in order to be reused in device drivers enabling
-threaded NAPI.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -6822,6 +6822,7 @@ int dev_set_threaded(struct net_device *
- 
- 	return err;
- }
-+EXPORT_SYMBOL(dev_set_threaded);
- 
- void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
- 		    int (*poll)(struct napi_struct *, int), int weight)
diff --git a/target/linux/generic/backport-5.10/610-v5.13-00-netfilter-flowtable-add-hash-offset-field-to-tuple.patch b/target/linux/generic/backport-5.10/610-v5.13-00-netfilter-flowtable-add-hash-offset-field-to-tuple.patch
deleted file mode 100644
index c881ccfcb084..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-00-netfilter-flowtable-add-hash-offset-field-to-tuple.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Fri, 20 Nov 2020 13:49:13 +0100
-Subject: [PATCH] netfilter: flowtable: add hash offset field to tuple
-
-Add a placeholder field to calculate hash tuple offset. Similar to
-2c407aca6497 ("netfilter: conntrack: avoid gcc-10 zero-length-bounds
-warning").
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -107,6 +107,10 @@ struct flow_offload_tuple {
- 
- 	u8				l3proto;
- 	u8				l4proto;
-+
-+	/* All members above are keys for lookups, see flow_offload_hash(). */
-+	struct { }			__hash;
-+
- 	u8				dir;
- 
- 	u16				mtu;
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -191,14 +191,14 @@ static u32 flow_offload_hash(const void
- {
- 	const struct flow_offload_tuple *tuple = data;
- 
--	return jhash(tuple, offsetof(struct flow_offload_tuple, dir), seed);
-+	return jhash(tuple, offsetof(struct flow_offload_tuple, __hash), seed);
- }
- 
- static u32 flow_offload_hash_obj(const void *data, u32 len, u32 seed)
- {
- 	const struct flow_offload_tuple_rhash *tuplehash = data;
- 
--	return jhash(&tuplehash->tuple, offsetof(struct flow_offload_tuple, dir), seed);
-+	return jhash(&tuplehash->tuple, offsetof(struct flow_offload_tuple, __hash), seed);
- }
- 
- static int flow_offload_hash_cmp(struct rhashtable_compare_arg *arg,
-@@ -207,7 +207,7 @@ static int flow_offload_hash_cmp(struct
- 	const struct flow_offload_tuple *tuple = arg->key;
- 	const struct flow_offload_tuple_rhash *x = ptr;
- 
--	if (memcmp(&x->tuple, tuple, offsetof(struct flow_offload_tuple, dir)))
-+	if (memcmp(&x->tuple, tuple, offsetof(struct flow_offload_tuple, __hash)))
- 		return 1;
- 
- 	return 0;
diff --git a/target/linux/generic/backport-5.10/610-v5.13-01-netfilter-flowtable-separate-replace-destroy-and-sta.patch b/target/linux/generic/backport-5.10/610-v5.13-01-netfilter-flowtable-separate-replace-destroy-and-sta.patch
deleted file mode 100644
index 478a2e0ec269..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-01-netfilter-flowtable-separate-replace-destroy-and-sta.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From: Oz Shlomo <ozsh@nvidia.com>
-Date: Tue, 23 Mar 2021 00:56:19 +0100
-Subject: [PATCH] netfilter: flowtable: separate replace, destroy and
- stats to different workqueues
-
-Currently the flow table offload replace, destroy and stats work items are
-executed on a single workqueue. As such, DESTROY and STATS commands may
-be backloged after a burst of REPLACE work items. This scenario can bloat
-up memory and may cause active connections to age.
-
-Instatiate add, del and stats workqueues to avoid backlogs of non-dependent
-actions. Provide sysfs control over the workqueue attributes, allowing
-userspace applications to control the workqueue cpumask.
-
-Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
-Reviewed-by: Paul Blakey <paulb@nvidia.com>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_offload.c
-+++ b/net/netfilter/nf_flow_table_offload.c
-@@ -13,7 +13,9 @@
- #include <net/netfilter/nf_conntrack_core.h>
- #include <net/netfilter/nf_conntrack_tuple.h>
- 
--static struct workqueue_struct *nf_flow_offload_wq;
-+static struct workqueue_struct *nf_flow_offload_add_wq;
-+static struct workqueue_struct *nf_flow_offload_del_wq;
-+static struct workqueue_struct *nf_flow_offload_stats_wq;
- 
- struct flow_offload_work {
- 	struct list_head	list;
-@@ -827,7 +829,12 @@ static void flow_offload_work_handler(st
- 
- static void flow_offload_queue_work(struct flow_offload_work *offload)
- {
--	queue_work(nf_flow_offload_wq, &offload->work);
-+	if (offload->cmd == FLOW_CLS_REPLACE)
-+		queue_work(nf_flow_offload_add_wq, &offload->work);
-+	else if (offload->cmd == FLOW_CLS_DESTROY)
-+		queue_work(nf_flow_offload_del_wq, &offload->work);
-+	else
-+		queue_work(nf_flow_offload_stats_wq, &offload->work);
- }
- 
- static struct flow_offload_work *
-@@ -899,8 +906,11 @@ void nf_flow_offload_stats(struct nf_flo
- 
- void nf_flow_table_offload_flush(struct nf_flowtable *flowtable)
- {
--	if (nf_flowtable_hw_offload(flowtable))
--		flush_workqueue(nf_flow_offload_wq);
-+	if (nf_flowtable_hw_offload(flowtable)) {
-+		flush_workqueue(nf_flow_offload_add_wq);
-+		flush_workqueue(nf_flow_offload_del_wq);
-+		flush_workqueue(nf_flow_offload_stats_wq);
-+	}
- }
- 
- static int nf_flow_table_block_setup(struct nf_flowtable *flowtable,
-@@ -1017,15 +1027,33 @@ EXPORT_SYMBOL_GPL(nf_flow_table_offload_
- 
- int nf_flow_table_offload_init(void)
- {
--	nf_flow_offload_wq  = alloc_workqueue("nf_flow_table_offload",
--					      WQ_UNBOUND, 0);
--	if (!nf_flow_offload_wq)
-+	nf_flow_offload_add_wq  = alloc_workqueue("nf_ft_offload_add",
-+						  WQ_UNBOUND | WQ_SYSFS, 0);
-+	if (!nf_flow_offload_add_wq)
- 		return -ENOMEM;
- 
-+	nf_flow_offload_del_wq  = alloc_workqueue("nf_ft_offload_del",
-+						  WQ_UNBOUND | WQ_SYSFS, 0);
-+	if (!nf_flow_offload_del_wq)
-+		goto err_del_wq;
-+
-+	nf_flow_offload_stats_wq  = alloc_workqueue("nf_ft_offload_stats",
-+						    WQ_UNBOUND | WQ_SYSFS, 0);
-+	if (!nf_flow_offload_stats_wq)
-+		goto err_stats_wq;
-+
- 	return 0;
-+
-+err_stats_wq:
-+	destroy_workqueue(nf_flow_offload_del_wq);
-+err_del_wq:
-+	destroy_workqueue(nf_flow_offload_add_wq);
-+	return -ENOMEM;
- }
- 
- void nf_flow_table_offload_exit(void)
- {
--	destroy_workqueue(nf_flow_offload_wq);
-+	destroy_workqueue(nf_flow_offload_add_wq);
-+	destroy_workqueue(nf_flow_offload_del_wq);
-+	destroy_workqueue(nf_flow_offload_stats_wq);
- }
diff --git a/target/linux/generic/backport-5.10/610-v5.13-03-netfilter-conntrack-Remove-unused-variable-declarati.patch b/target/linux/generic/backport-5.10/610-v5.13-03-netfilter-conntrack-Remove-unused-variable-declarati.patch
deleted file mode 100644
index 37e80d989d23..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-03-netfilter-conntrack-Remove-unused-variable-declarati.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: YueHaibing <yuehaibing@huawei.com>
-Date: Tue, 23 Mar 2021 00:56:21 +0100
-Subject: [PATCH] netfilter: conntrack: Remove unused variable
- declaration
-
-commit e97c3e278e95 ("tproxy: split off ipv6 defragmentation to a separate
-module") left behind this.
-
-Signed-off-by: YueHaibing <yuehaibing@huawei.com>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netfilter/ipv6/nf_conntrack_ipv6.h
-+++ b/include/net/netfilter/ipv6/nf_conntrack_ipv6.h
-@@ -4,7 +4,4 @@
- 
- extern const struct nf_conntrack_l4proto nf_conntrack_l4proto_icmpv6;
- 
--#include <linux/sysctl.h>
--extern struct ctl_table nf_ct_ipv6_sysctl_table[];
--
- #endif /* _NF_CONNTRACK_IPV6_H*/
diff --git a/target/linux/generic/backport-5.10/610-v5.13-04-netfilter-flowtable-consolidate-skb_try_make_writabl.patch b/target/linux/generic/backport-5.10/610-v5.13-04-netfilter-flowtable-consolidate-skb_try_make_writabl.patch
deleted file mode 100644
index 9fd01b465e3a..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-04-netfilter-flowtable-consolidate-skb_try_make_writabl.patch
+++ /dev/null
@@ -1,291 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Tue, 23 Mar 2021 00:56:22 +0100
-Subject: [PATCH] netfilter: flowtable: consolidate
- skb_try_make_writable() call
-
-Fetch the layer 4 header size to be mangled by NAT when building the
-tuple, then use it to make writable the network and the transport
-headers. After this update, the NAT routines now assumes that the skbuff
-area is writable. Do the pointer refetch only after the single
-skb_try_make_writable() call.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -394,9 +394,6 @@ static int nf_flow_nat_port_tcp(struct s
- {
- 	struct tcphdr *tcph;
- 
--	if (skb_try_make_writable(skb, thoff + sizeof(*tcph)))
--		return -1;
--
- 	tcph = (void *)(skb_network_header(skb) + thoff);
- 	inet_proto_csum_replace2(&tcph->check, skb, port, new_port, false);
- 
-@@ -408,9 +405,6 @@ static int nf_flow_nat_port_udp(struct s
- {
- 	struct udphdr *udph;
- 
--	if (skb_try_make_writable(skb, thoff + sizeof(*udph)))
--		return -1;
--
- 	udph = (void *)(skb_network_header(skb) + thoff);
- 	if (udph->check || skb->ip_summed == CHECKSUM_PARTIAL) {
- 		inet_proto_csum_replace2(&udph->check, skb, port,
-@@ -446,9 +440,6 @@ int nf_flow_snat_port(const struct flow_
- 	struct flow_ports *hdr;
- 	__be16 port, new_port;
- 
--	if (skb_try_make_writable(skb, thoff + sizeof(*hdr)))
--		return -1;
--
- 	hdr = (void *)(skb_network_header(skb) + thoff);
- 
- 	switch (dir) {
-@@ -477,9 +468,6 @@ int nf_flow_dnat_port(const struct flow_
- 	struct flow_ports *hdr;
- 	__be16 port, new_port;
- 
--	if (skb_try_make_writable(skb, thoff + sizeof(*hdr)))
--		return -1;
--
- 	hdr = (void *)(skb_network_header(skb) + thoff);
- 
- 	switch (dir) {
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -39,9 +39,6 @@ static int nf_flow_nat_ip_tcp(struct sk_
- {
- 	struct tcphdr *tcph;
- 
--	if (skb_try_make_writable(skb, thoff + sizeof(*tcph)))
--		return -1;
--
- 	tcph = (void *)(skb_network_header(skb) + thoff);
- 	inet_proto_csum_replace4(&tcph->check, skb, addr, new_addr, true);
- 
-@@ -53,9 +50,6 @@ static int nf_flow_nat_ip_udp(struct sk_
- {
- 	struct udphdr *udph;
- 
--	if (skb_try_make_writable(skb, thoff + sizeof(*udph)))
--		return -1;
--
- 	udph = (void *)(skb_network_header(skb) + thoff);
- 	if (udph->check || skb->ip_summed == CHECKSUM_PARTIAL) {
- 		inet_proto_csum_replace4(&udph->check, skb, addr,
-@@ -136,19 +130,17 @@ static int nf_flow_dnat_ip(const struct
- }
- 
- static int nf_flow_nat_ip(const struct flow_offload *flow, struct sk_buff *skb,
--			  unsigned int thoff, enum flow_offload_tuple_dir dir)
-+			  unsigned int thoff, enum flow_offload_tuple_dir dir,
-+			  struct iphdr *iph)
- {
--	struct iphdr *iph = ip_hdr(skb);
--
- 	if (test_bit(NF_FLOW_SNAT, &flow->flags) &&
- 	    (nf_flow_snat_port(flow, skb, thoff, iph->protocol, dir) < 0 ||
--	     nf_flow_snat_ip(flow, skb, ip_hdr(skb), thoff, dir) < 0))
-+	     nf_flow_snat_ip(flow, skb, iph, thoff, dir) < 0))
- 		return -1;
- 
--	iph = ip_hdr(skb);
- 	if (test_bit(NF_FLOW_DNAT, &flow->flags) &&
- 	    (nf_flow_dnat_port(flow, skb, thoff, iph->protocol, dir) < 0 ||
--	     nf_flow_dnat_ip(flow, skb, ip_hdr(skb), thoff, dir) < 0))
-+	     nf_flow_dnat_ip(flow, skb, iph, thoff, dir) < 0))
- 		return -1;
- 
- 	return 0;
-@@ -160,10 +152,10 @@ static bool ip_has_options(unsigned int
- }
- 
- static int nf_flow_tuple_ip(struct sk_buff *skb, const struct net_device *dev,
--			    struct flow_offload_tuple *tuple)
-+			    struct flow_offload_tuple *tuple, u32 *hdrsize)
- {
--	unsigned int thoff, hdrsize;
- 	struct flow_ports *ports;
-+	unsigned int thoff;
- 	struct iphdr *iph;
- 
- 	if (!pskb_may_pull(skb, sizeof(*iph)))
-@@ -178,10 +170,10 @@ static int nf_flow_tuple_ip(struct sk_bu
- 
- 	switch (iph->protocol) {
- 	case IPPROTO_TCP:
--		hdrsize = sizeof(struct tcphdr);
-+		*hdrsize = sizeof(struct tcphdr);
- 		break;
- 	case IPPROTO_UDP:
--		hdrsize = sizeof(struct udphdr);
-+		*hdrsize = sizeof(struct udphdr);
- 		break;
- 	default:
- 		return -1;
-@@ -191,7 +183,7 @@ static int nf_flow_tuple_ip(struct sk_bu
- 		return -1;
- 
- 	thoff = iph->ihl * 4;
--	if (!pskb_may_pull(skb, thoff + hdrsize))
-+	if (!pskb_may_pull(skb, thoff + *hdrsize))
- 		return -1;
- 
- 	iph = ip_hdr(skb);
-@@ -252,11 +244,12 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	unsigned int thoff;
- 	struct iphdr *iph;
- 	__be32 nexthop;
-+	u32 hdrsize;
- 
- 	if (skb->protocol != htons(ETH_P_IP))
- 		return NF_ACCEPT;
- 
--	if (nf_flow_tuple_ip(skb, state->in, &tuple) < 0)
-+	if (nf_flow_tuple_ip(skb, state->in, &tuple, &hdrsize) < 0)
- 		return NF_ACCEPT;
- 
- 	tuplehash = flow_offload_lookup(flow_table, &tuple);
-@@ -271,11 +264,13 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	if (unlikely(nf_flow_exceeds_mtu(skb, flow->tuplehash[dir].tuple.mtu)))
- 		return NF_ACCEPT;
- 
--	if (skb_try_make_writable(skb, sizeof(*iph)))
-+	iph = ip_hdr(skb);
-+	thoff = iph->ihl * 4;
-+	if (skb_try_make_writable(skb, thoff + hdrsize))
- 		return NF_DROP;
- 
--	thoff = ip_hdr(skb)->ihl * 4;
--	if (nf_flow_state_check(flow, ip_hdr(skb)->protocol, skb, thoff))
-+	iph = ip_hdr(skb);
-+	if (nf_flow_state_check(flow, iph->protocol, skb, thoff))
- 		return NF_ACCEPT;
- 
- 	flow_offload_refresh(flow_table, flow);
-@@ -285,10 +280,9 @@ nf_flow_offload_ip_hook(void *priv, stru
- 		return NF_ACCEPT;
- 	}
- 
--	if (nf_flow_nat_ip(flow, skb, thoff, dir) < 0)
-+	if (nf_flow_nat_ip(flow, skb, thoff, dir, iph) < 0)
- 		return NF_DROP;
- 
--	iph = ip_hdr(skb);
- 	ip_decrease_ttl(iph);
- 	skb->tstamp = 0;
- 
-@@ -317,9 +311,6 @@ static int nf_flow_nat_ipv6_tcp(struct s
- {
- 	struct tcphdr *tcph;
- 
--	if (skb_try_make_writable(skb, thoff + sizeof(*tcph)))
--		return -1;
--
- 	tcph = (void *)(skb_network_header(skb) + thoff);
- 	inet_proto_csum_replace16(&tcph->check, skb, addr->s6_addr32,
- 				  new_addr->s6_addr32, true);
-@@ -333,9 +324,6 @@ static int nf_flow_nat_ipv6_udp(struct s
- {
- 	struct udphdr *udph;
- 
--	if (skb_try_make_writable(skb, thoff + sizeof(*udph)))
--		return -1;
--
- 	udph = (void *)(skb_network_header(skb) + thoff);
- 	if (udph->check || skb->ip_summed == CHECKSUM_PARTIAL) {
- 		inet_proto_csum_replace16(&udph->check, skb, addr->s6_addr32,
-@@ -417,31 +405,30 @@ static int nf_flow_dnat_ipv6(const struc
- 
- static int nf_flow_nat_ipv6(const struct flow_offload *flow,
- 			    struct sk_buff *skb,
--			    enum flow_offload_tuple_dir dir)
-+			    enum flow_offload_tuple_dir dir,
-+			    struct ipv6hdr *ip6h)
- {
--	struct ipv6hdr *ip6h = ipv6_hdr(skb);
- 	unsigned int thoff = sizeof(*ip6h);
- 
- 	if (test_bit(NF_FLOW_SNAT, &flow->flags) &&
- 	    (nf_flow_snat_port(flow, skb, thoff, ip6h->nexthdr, dir) < 0 ||
--	     nf_flow_snat_ipv6(flow, skb, ipv6_hdr(skb), thoff, dir) < 0))
-+	     nf_flow_snat_ipv6(flow, skb, ip6h, thoff, dir) < 0))
- 		return -1;
- 
--	ip6h = ipv6_hdr(skb);
- 	if (test_bit(NF_FLOW_DNAT, &flow->flags) &&
- 	    (nf_flow_dnat_port(flow, skb, thoff, ip6h->nexthdr, dir) < 0 ||
--	     nf_flow_dnat_ipv6(flow, skb, ipv6_hdr(skb), thoff, dir) < 0))
-+	     nf_flow_dnat_ipv6(flow, skb, ip6h, thoff, dir) < 0))
- 		return -1;
- 
- 	return 0;
- }
- 
- static int nf_flow_tuple_ipv6(struct sk_buff *skb, const struct net_device *dev,
--			      struct flow_offload_tuple *tuple)
-+			      struct flow_offload_tuple *tuple, u32 *hdrsize)
- {
--	unsigned int thoff, hdrsize;
- 	struct flow_ports *ports;
- 	struct ipv6hdr *ip6h;
-+	unsigned int thoff;
- 
- 	if (!pskb_may_pull(skb, sizeof(*ip6h)))
- 		return -1;
-@@ -450,10 +437,10 @@ static int nf_flow_tuple_ipv6(struct sk_
- 
- 	switch (ip6h->nexthdr) {
- 	case IPPROTO_TCP:
--		hdrsize = sizeof(struct tcphdr);
-+		*hdrsize = sizeof(struct tcphdr);
- 		break;
- 	case IPPROTO_UDP:
--		hdrsize = sizeof(struct udphdr);
-+		*hdrsize = sizeof(struct udphdr);
- 		break;
- 	default:
- 		return -1;
-@@ -463,7 +450,7 @@ static int nf_flow_tuple_ipv6(struct sk_
- 		return -1;
- 
- 	thoff = sizeof(*ip6h);
--	if (!pskb_may_pull(skb, thoff + hdrsize))
-+	if (!pskb_may_pull(skb, thoff + *hdrsize))
- 		return -1;
- 
- 	ip6h = ipv6_hdr(skb);
-@@ -493,11 +480,12 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 	struct net_device *outdev;
- 	struct ipv6hdr *ip6h;
- 	struct rt6_info *rt;
-+	u32 hdrsize;
- 
- 	if (skb->protocol != htons(ETH_P_IPV6))
- 		return NF_ACCEPT;
- 
--	if (nf_flow_tuple_ipv6(skb, state->in, &tuple) < 0)
-+	if (nf_flow_tuple_ipv6(skb, state->in, &tuple, &hdrsize) < 0)
- 		return NF_ACCEPT;
- 
- 	tuplehash = flow_offload_lookup(flow_table, &tuple);
-@@ -523,13 +511,13 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 		return NF_ACCEPT;
- 	}
- 
--	if (skb_try_make_writable(skb, sizeof(*ip6h)))
-+	if (skb_try_make_writable(skb, sizeof(*ip6h) + hdrsize))
- 		return NF_DROP;
- 
--	if (nf_flow_nat_ipv6(flow, skb, dir) < 0)
-+	ip6h = ipv6_hdr(skb);
-+	if (nf_flow_nat_ipv6(flow, skb, dir, ip6h) < 0)
- 		return NF_DROP;
- 
--	ip6h = ipv6_hdr(skb);
- 	ip6h->hop_limit--;
- 	skb->tstamp = 0;
- 
diff --git a/target/linux/generic/backport-5.10/610-v5.13-05-netfilter-flowtable-move-skb_try_make_writable-befor.patch b/target/linux/generic/backport-5.10/610-v5.13-05-netfilter-flowtable-move-skb_try_make_writable-befor.patch
deleted file mode 100644
index 84e294de7aec..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-05-netfilter-flowtable-move-skb_try_make_writable-befor.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Tue, 23 Mar 2021 00:56:23 +0100
-Subject: [PATCH] netfilter: flowtable: move skb_try_make_writable()
- before NAT in IPv4
-
-For consistency with the IPv6 flowtable datapath and to make sure the
-skbuff is writable right before the NAT header updates.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -266,10 +266,6 @@ nf_flow_offload_ip_hook(void *priv, stru
- 
- 	iph = ip_hdr(skb);
- 	thoff = iph->ihl * 4;
--	if (skb_try_make_writable(skb, thoff + hdrsize))
--		return NF_DROP;
--
--	iph = ip_hdr(skb);
- 	if (nf_flow_state_check(flow, iph->protocol, skb, thoff))
- 		return NF_ACCEPT;
- 
-@@ -280,6 +276,10 @@ nf_flow_offload_ip_hook(void *priv, stru
- 		return NF_ACCEPT;
- 	}
- 
-+	if (skb_try_make_writable(skb, thoff + hdrsize))
-+		return NF_DROP;
-+
-+	iph = ip_hdr(skb);
- 	if (nf_flow_nat_ip(flow, skb, thoff, dir, iph) < 0)
- 		return NF_DROP;
- 
diff --git a/target/linux/generic/backport-5.10/610-v5.13-06-netfilter-flowtable-move-FLOW_OFFLOAD_DIR_MAX-away-f.patch b/target/linux/generic/backport-5.10/610-v5.13-06-netfilter-flowtable-move-FLOW_OFFLOAD_DIR_MAX-away-f.patch
deleted file mode 100644
index 64a0e420799b..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-06-netfilter-flowtable-move-FLOW_OFFLOAD_DIR_MAX-away-f.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Tue, 23 Mar 2021 00:56:24 +0100
-Subject: [PATCH] netfilter: flowtable: move FLOW_OFFLOAD_DIR_MAX away
- from enumeration
-
-This allows to remove the default case which should not ever happen and
-that was added to avoid gcc warnings on unhandled FLOW_OFFLOAD_DIR_MAX
-enumeration case.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -86,8 +86,8 @@ static inline bool nf_flowtable_hw_offlo
- enum flow_offload_tuple_dir {
- 	FLOW_OFFLOAD_DIR_ORIGINAL = IP_CT_DIR_ORIGINAL,
- 	FLOW_OFFLOAD_DIR_REPLY = IP_CT_DIR_REPLY,
--	FLOW_OFFLOAD_DIR_MAX = IP_CT_DIR_MAX
- };
-+#define FLOW_OFFLOAD_DIR_MAX	IP_CT_DIR_MAX
- 
- struct flow_offload_tuple {
- 	union {
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -453,8 +453,6 @@ int nf_flow_snat_port(const struct flow_
- 		new_port = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.src_port;
- 		hdr->dest = new_port;
- 		break;
--	default:
--		return -1;
- 	}
- 
- 	return nf_flow_nat_port(skb, thoff, protocol, port, new_port);
-@@ -481,8 +479,6 @@ int nf_flow_dnat_port(const struct flow_
- 		new_port = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.dst_port;
- 		hdr->source = new_port;
- 		break;
--	default:
--		return -1;
- 	}
- 
- 	return nf_flow_nat_port(skb, thoff, protocol, port, new_port);
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -96,8 +96,6 @@ static int nf_flow_snat_ip(const struct
- 		new_addr = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.src_v4.s_addr;
- 		iph->daddr = new_addr;
- 		break;
--	default:
--		return -1;
- 	}
- 	csum_replace4(&iph->check, addr, new_addr);
- 
-@@ -121,8 +119,6 @@ static int nf_flow_dnat_ip(const struct
- 		new_addr = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.dst_v4.s_addr;
- 		iph->saddr = new_addr;
- 		break;
--	default:
--		return -1;
- 	}
- 	csum_replace4(&iph->check, addr, new_addr);
- 
-@@ -371,8 +367,6 @@ static int nf_flow_snat_ipv6(const struc
- 		new_addr = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.src_v6;
- 		ip6h->daddr = new_addr;
- 		break;
--	default:
--		return -1;
- 	}
- 
- 	return nf_flow_nat_ipv6_l4proto(skb, ip6h, thoff, &addr, &new_addr);
-@@ -396,8 +390,6 @@ static int nf_flow_dnat_ipv6(const struc
- 		new_addr = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.dst_v6;
- 		ip6h->saddr = new_addr;
- 		break;
--	default:
--		return -1;
- 	}
- 
- 	return nf_flow_nat_ipv6_l4proto(skb, ip6h, thoff, &addr, &new_addr);
diff --git a/target/linux/generic/backport-5.10/610-v5.13-07-netfilter-flowtable-fast-NAT-functions-never-fail.patch b/target/linux/generic/backport-5.10/610-v5.13-07-netfilter-flowtable-fast-NAT-functions-never-fail.patch
deleted file mode 100644
index 2224e095c975..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-07-netfilter-flowtable-fast-NAT-functions-never-fail.patch
+++ /dev/null
@@ -1,394 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Tue, 23 Mar 2021 00:56:25 +0100
-Subject: [PATCH] netfilter: flowtable: fast NAT functions never fail
-
-Simplify existing fast NAT routines by returning void. After the
-skb_try_make_writable() call consolidation, these routines cannot ever
-fail.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -228,12 +228,12 @@ void nf_flow_table_free(struct nf_flowta
- 
- void flow_offload_teardown(struct flow_offload *flow);
- 
--int nf_flow_snat_port(const struct flow_offload *flow,
--		      struct sk_buff *skb, unsigned int thoff,
--		      u8 protocol, enum flow_offload_tuple_dir dir);
--int nf_flow_dnat_port(const struct flow_offload *flow,
--		      struct sk_buff *skb, unsigned int thoff,
--		      u8 protocol, enum flow_offload_tuple_dir dir);
-+void nf_flow_snat_port(const struct flow_offload *flow,
-+		       struct sk_buff *skb, unsigned int thoff,
-+		       u8 protocol, enum flow_offload_tuple_dir dir);
-+void nf_flow_dnat_port(const struct flow_offload *flow,
-+		       struct sk_buff *skb, unsigned int thoff,
-+		       u8 protocol, enum flow_offload_tuple_dir dir);
- 
- struct flow_ports {
- 	__be16 source, dest;
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -388,20 +388,17 @@ static void nf_flow_offload_work_gc(stru
- 	queue_delayed_work(system_power_efficient_wq, &flow_table->gc_work, HZ);
- }
- 
--
--static int nf_flow_nat_port_tcp(struct sk_buff *skb, unsigned int thoff,
--				__be16 port, __be16 new_port)
-+static void nf_flow_nat_port_tcp(struct sk_buff *skb, unsigned int thoff,
-+				 __be16 port, __be16 new_port)
- {
- 	struct tcphdr *tcph;
- 
- 	tcph = (void *)(skb_network_header(skb) + thoff);
- 	inet_proto_csum_replace2(&tcph->check, skb, port, new_port, false);
--
--	return 0;
- }
- 
--static int nf_flow_nat_port_udp(struct sk_buff *skb, unsigned int thoff,
--				__be16 port, __be16 new_port)
-+static void nf_flow_nat_port_udp(struct sk_buff *skb, unsigned int thoff,
-+				 __be16 port, __be16 new_port)
- {
- 	struct udphdr *udph;
- 
-@@ -412,30 +409,24 @@ static int nf_flow_nat_port_udp(struct s
- 		if (!udph->check)
- 			udph->check = CSUM_MANGLED_0;
- 	}
--
--	return 0;
- }
- 
--static int nf_flow_nat_port(struct sk_buff *skb, unsigned int thoff,
--			    u8 protocol, __be16 port, __be16 new_port)
-+static void nf_flow_nat_port(struct sk_buff *skb, unsigned int thoff,
-+			     u8 protocol, __be16 port, __be16 new_port)
- {
- 	switch (protocol) {
- 	case IPPROTO_TCP:
--		if (nf_flow_nat_port_tcp(skb, thoff, port, new_port) < 0)
--			return NF_DROP;
-+		nf_flow_nat_port_tcp(skb, thoff, port, new_port);
- 		break;
- 	case IPPROTO_UDP:
--		if (nf_flow_nat_port_udp(skb, thoff, port, new_port) < 0)
--			return NF_DROP;
-+		nf_flow_nat_port_udp(skb, thoff, port, new_port);
- 		break;
- 	}
--
--	return 0;
- }
- 
--int nf_flow_snat_port(const struct flow_offload *flow,
--		      struct sk_buff *skb, unsigned int thoff,
--		      u8 protocol, enum flow_offload_tuple_dir dir)
-+void nf_flow_snat_port(const struct flow_offload *flow,
-+		       struct sk_buff *skb, unsigned int thoff,
-+		       u8 protocol, enum flow_offload_tuple_dir dir)
- {
- 	struct flow_ports *hdr;
- 	__be16 port, new_port;
-@@ -455,13 +446,13 @@ int nf_flow_snat_port(const struct flow_
- 		break;
- 	}
- 
--	return nf_flow_nat_port(skb, thoff, protocol, port, new_port);
-+	nf_flow_nat_port(skb, thoff, protocol, port, new_port);
- }
- EXPORT_SYMBOL_GPL(nf_flow_snat_port);
- 
--int nf_flow_dnat_port(const struct flow_offload *flow,
--		      struct sk_buff *skb, unsigned int thoff,
--		      u8 protocol, enum flow_offload_tuple_dir dir)
-+void nf_flow_dnat_port(const struct flow_offload *flow, struct sk_buff *skb,
-+		       unsigned int thoff, u8 protocol,
-+		       enum flow_offload_tuple_dir dir)
- {
- 	struct flow_ports *hdr;
- 	__be16 port, new_port;
-@@ -481,7 +472,7 @@ int nf_flow_dnat_port(const struct flow_
- 		break;
- 	}
- 
--	return nf_flow_nat_port(skb, thoff, protocol, port, new_port);
-+	nf_flow_nat_port(skb, thoff, protocol, port, new_port);
- }
- EXPORT_SYMBOL_GPL(nf_flow_dnat_port);
- 
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -34,19 +34,17 @@ static int nf_flow_state_check(struct fl
- 	return 0;
- }
- 
--static int nf_flow_nat_ip_tcp(struct sk_buff *skb, unsigned int thoff,
--			      __be32 addr, __be32 new_addr)
-+static void nf_flow_nat_ip_tcp(struct sk_buff *skb, unsigned int thoff,
-+			       __be32 addr, __be32 new_addr)
- {
- 	struct tcphdr *tcph;
- 
- 	tcph = (void *)(skb_network_header(skb) + thoff);
- 	inet_proto_csum_replace4(&tcph->check, skb, addr, new_addr, true);
--
--	return 0;
- }
- 
--static int nf_flow_nat_ip_udp(struct sk_buff *skb, unsigned int thoff,
--			      __be32 addr, __be32 new_addr)
-+static void nf_flow_nat_ip_udp(struct sk_buff *skb, unsigned int thoff,
-+			       __be32 addr, __be32 new_addr)
- {
- 	struct udphdr *udph;
- 
-@@ -57,31 +55,25 @@ static int nf_flow_nat_ip_udp(struct sk_
- 		if (!udph->check)
- 			udph->check = CSUM_MANGLED_0;
- 	}
--
--	return 0;
- }
- 
--static int nf_flow_nat_ip_l4proto(struct sk_buff *skb, struct iphdr *iph,
--				  unsigned int thoff, __be32 addr,
--				  __be32 new_addr)
-+static void nf_flow_nat_ip_l4proto(struct sk_buff *skb, struct iphdr *iph,
-+				   unsigned int thoff, __be32 addr,
-+				   __be32 new_addr)
- {
- 	switch (iph->protocol) {
- 	case IPPROTO_TCP:
--		if (nf_flow_nat_ip_tcp(skb, thoff, addr, new_addr) < 0)
--			return NF_DROP;
-+		nf_flow_nat_ip_tcp(skb, thoff, addr, new_addr);
- 		break;
- 	case IPPROTO_UDP:
--		if (nf_flow_nat_ip_udp(skb, thoff, addr, new_addr) < 0)
--			return NF_DROP;
-+		nf_flow_nat_ip_udp(skb, thoff, addr, new_addr);
- 		break;
- 	}
--
--	return 0;
- }
- 
--static int nf_flow_snat_ip(const struct flow_offload *flow, struct sk_buff *skb,
--			   struct iphdr *iph, unsigned int thoff,
--			   enum flow_offload_tuple_dir dir)
-+static void nf_flow_snat_ip(const struct flow_offload *flow,
-+			    struct sk_buff *skb, struct iphdr *iph,
-+			    unsigned int thoff, enum flow_offload_tuple_dir dir)
- {
- 	__be32 addr, new_addr;
- 
-@@ -99,12 +91,12 @@ static int nf_flow_snat_ip(const struct
- 	}
- 	csum_replace4(&iph->check, addr, new_addr);
- 
--	return nf_flow_nat_ip_l4proto(skb, iph, thoff, addr, new_addr);
-+	nf_flow_nat_ip_l4proto(skb, iph, thoff, addr, new_addr);
- }
- 
--static int nf_flow_dnat_ip(const struct flow_offload *flow, struct sk_buff *skb,
--			   struct iphdr *iph, unsigned int thoff,
--			   enum flow_offload_tuple_dir dir)
-+static void nf_flow_dnat_ip(const struct flow_offload *flow,
-+			    struct sk_buff *skb, struct iphdr *iph,
-+			    unsigned int thoff, enum flow_offload_tuple_dir dir)
- {
- 	__be32 addr, new_addr;
- 
-@@ -122,24 +114,21 @@ static int nf_flow_dnat_ip(const struct
- 	}
- 	csum_replace4(&iph->check, addr, new_addr);
- 
--	return nf_flow_nat_ip_l4proto(skb, iph, thoff, addr, new_addr);
-+	nf_flow_nat_ip_l4proto(skb, iph, thoff, addr, new_addr);
- }
- 
--static int nf_flow_nat_ip(const struct flow_offload *flow, struct sk_buff *skb,
-+static void nf_flow_nat_ip(const struct flow_offload *flow, struct sk_buff *skb,
- 			  unsigned int thoff, enum flow_offload_tuple_dir dir,
- 			  struct iphdr *iph)
- {
--	if (test_bit(NF_FLOW_SNAT, &flow->flags) &&
--	    (nf_flow_snat_port(flow, skb, thoff, iph->protocol, dir) < 0 ||
--	     nf_flow_snat_ip(flow, skb, iph, thoff, dir) < 0))
--		return -1;
--
--	if (test_bit(NF_FLOW_DNAT, &flow->flags) &&
--	    (nf_flow_dnat_port(flow, skb, thoff, iph->protocol, dir) < 0 ||
--	     nf_flow_dnat_ip(flow, skb, iph, thoff, dir) < 0))
--		return -1;
--
--	return 0;
-+	if (test_bit(NF_FLOW_SNAT, &flow->flags)) {
-+		nf_flow_snat_port(flow, skb, thoff, iph->protocol, dir);
-+		nf_flow_snat_ip(flow, skb, iph, thoff, dir);
-+	}
-+	if (test_bit(NF_FLOW_DNAT, &flow->flags)) {
-+		nf_flow_dnat_port(flow, skb, thoff, iph->protocol, dir);
-+		nf_flow_dnat_ip(flow, skb, iph, thoff, dir);
-+	}
- }
- 
- static bool ip_has_options(unsigned int thoff)
-@@ -276,8 +265,7 @@ nf_flow_offload_ip_hook(void *priv, stru
- 		return NF_DROP;
- 
- 	iph = ip_hdr(skb);
--	if (nf_flow_nat_ip(flow, skb, thoff, dir, iph) < 0)
--		return NF_DROP;
-+	nf_flow_nat_ip(flow, skb, thoff, dir, iph);
- 
- 	ip_decrease_ttl(iph);
- 	skb->tstamp = 0;
-@@ -301,22 +289,21 @@ nf_flow_offload_ip_hook(void *priv, stru
- }
- EXPORT_SYMBOL_GPL(nf_flow_offload_ip_hook);
- 
--static int nf_flow_nat_ipv6_tcp(struct sk_buff *skb, unsigned int thoff,
--				struct in6_addr *addr,
--				struct in6_addr *new_addr)
-+static void nf_flow_nat_ipv6_tcp(struct sk_buff *skb, unsigned int thoff,
-+				 struct in6_addr *addr,
-+				 struct in6_addr *new_addr,
-+				 struct ipv6hdr *ip6h)
- {
- 	struct tcphdr *tcph;
- 
- 	tcph = (void *)(skb_network_header(skb) + thoff);
- 	inet_proto_csum_replace16(&tcph->check, skb, addr->s6_addr32,
- 				  new_addr->s6_addr32, true);
--
--	return 0;
- }
- 
--static int nf_flow_nat_ipv6_udp(struct sk_buff *skb, unsigned int thoff,
--				struct in6_addr *addr,
--				struct in6_addr *new_addr)
-+static void nf_flow_nat_ipv6_udp(struct sk_buff *skb, unsigned int thoff,
-+				 struct in6_addr *addr,
-+				 struct in6_addr *new_addr)
- {
- 	struct udphdr *udph;
- 
-@@ -327,32 +314,26 @@ static int nf_flow_nat_ipv6_udp(struct s
- 		if (!udph->check)
- 			udph->check = CSUM_MANGLED_0;
- 	}
--
--	return 0;
- }
- 
--static int nf_flow_nat_ipv6_l4proto(struct sk_buff *skb, struct ipv6hdr *ip6h,
--				    unsigned int thoff, struct in6_addr *addr,
--				    struct in6_addr *new_addr)
-+static void nf_flow_nat_ipv6_l4proto(struct sk_buff *skb, struct ipv6hdr *ip6h,
-+				     unsigned int thoff, struct in6_addr *addr,
-+				     struct in6_addr *new_addr)
- {
- 	switch (ip6h->nexthdr) {
- 	case IPPROTO_TCP:
--		if (nf_flow_nat_ipv6_tcp(skb, thoff, addr, new_addr) < 0)
--			return NF_DROP;
-+		nf_flow_nat_ipv6_tcp(skb, thoff, addr, new_addr, ip6h);
- 		break;
- 	case IPPROTO_UDP:
--		if (nf_flow_nat_ipv6_udp(skb, thoff, addr, new_addr) < 0)
--			return NF_DROP;
-+		nf_flow_nat_ipv6_udp(skb, thoff, addr, new_addr);
- 		break;
- 	}
--
--	return 0;
- }
- 
--static int nf_flow_snat_ipv6(const struct flow_offload *flow,
--			     struct sk_buff *skb, struct ipv6hdr *ip6h,
--			     unsigned int thoff,
--			     enum flow_offload_tuple_dir dir)
-+static void nf_flow_snat_ipv6(const struct flow_offload *flow,
-+			      struct sk_buff *skb, struct ipv6hdr *ip6h,
-+			      unsigned int thoff,
-+			      enum flow_offload_tuple_dir dir)
- {
- 	struct in6_addr addr, new_addr;
- 
-@@ -369,13 +350,13 @@ static int nf_flow_snat_ipv6(const struc
- 		break;
- 	}
- 
--	return nf_flow_nat_ipv6_l4proto(skb, ip6h, thoff, &addr, &new_addr);
-+	nf_flow_nat_ipv6_l4proto(skb, ip6h, thoff, &addr, &new_addr);
- }
- 
--static int nf_flow_dnat_ipv6(const struct flow_offload *flow,
--			     struct sk_buff *skb, struct ipv6hdr *ip6h,
--			     unsigned int thoff,
--			     enum flow_offload_tuple_dir dir)
-+static void nf_flow_dnat_ipv6(const struct flow_offload *flow,
-+			      struct sk_buff *skb, struct ipv6hdr *ip6h,
-+			      unsigned int thoff,
-+			      enum flow_offload_tuple_dir dir)
- {
- 	struct in6_addr addr, new_addr;
- 
-@@ -392,27 +373,24 @@ static int nf_flow_dnat_ipv6(const struc
- 		break;
- 	}
- 
--	return nf_flow_nat_ipv6_l4proto(skb, ip6h, thoff, &addr, &new_addr);
-+	nf_flow_nat_ipv6_l4proto(skb, ip6h, thoff, &addr, &new_addr);
- }
- 
--static int nf_flow_nat_ipv6(const struct flow_offload *flow,
--			    struct sk_buff *skb,
--			    enum flow_offload_tuple_dir dir,
--			    struct ipv6hdr *ip6h)
-+static void nf_flow_nat_ipv6(const struct flow_offload *flow,
-+			     struct sk_buff *skb,
-+			     enum flow_offload_tuple_dir dir,
-+			     struct ipv6hdr *ip6h)
- {
- 	unsigned int thoff = sizeof(*ip6h);
- 
--	if (test_bit(NF_FLOW_SNAT, &flow->flags) &&
--	    (nf_flow_snat_port(flow, skb, thoff, ip6h->nexthdr, dir) < 0 ||
--	     nf_flow_snat_ipv6(flow, skb, ip6h, thoff, dir) < 0))
--		return -1;
--
--	if (test_bit(NF_FLOW_DNAT, &flow->flags) &&
--	    (nf_flow_dnat_port(flow, skb, thoff, ip6h->nexthdr, dir) < 0 ||
--	     nf_flow_dnat_ipv6(flow, skb, ip6h, thoff, dir) < 0))
--		return -1;
--
--	return 0;
-+	if (test_bit(NF_FLOW_SNAT, &flow->flags)) {
-+		nf_flow_snat_port(flow, skb, thoff, ip6h->nexthdr, dir);
-+		nf_flow_snat_ipv6(flow, skb, ip6h, thoff, dir);
-+	}
-+	if (test_bit(NF_FLOW_DNAT, &flow->flags)) {
-+		nf_flow_dnat_port(flow, skb, thoff, ip6h->nexthdr, dir);
-+		nf_flow_dnat_ipv6(flow, skb, ip6h, thoff, dir);
-+	}
- }
- 
- static int nf_flow_tuple_ipv6(struct sk_buff *skb, const struct net_device *dev,
-@@ -507,8 +485,7 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 		return NF_DROP;
- 
- 	ip6h = ipv6_hdr(skb);
--	if (nf_flow_nat_ipv6(flow, skb, dir, ip6h) < 0)
--		return NF_DROP;
-+	nf_flow_nat_ipv6(flow, skb, dir, ip6h);
- 
- 	ip6h->hop_limit--;
- 	skb->tstamp = 0;
diff --git a/target/linux/generic/backport-5.10/610-v5.13-08-netfilter-flowtable-call-dst_check-to-fall-back-to-c.patch b/target/linux/generic/backport-5.10/610-v5.13-08-netfilter-flowtable-call-dst_check-to-fall-back-to-c.patch
deleted file mode 100644
index 276785030d17..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-08-netfilter-flowtable-call-dst_check-to-fall-back-to-c.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Tue, 23 Mar 2021 00:56:26 +0100
-Subject: [PATCH] netfilter: flowtable: call dst_check() to fall back to
- classic forwarding
-
-In case the route is stale, pass up the packet to the classic forwarding
-path for re-evaluation and schedule this flow entry for removal.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -197,14 +197,6 @@ static bool nf_flow_exceeds_mtu(const st
- 	return true;
- }
- 
--static int nf_flow_offload_dst_check(struct dst_entry *dst)
--{
--	if (unlikely(dst_xfrm(dst)))
--		return dst_check(dst, 0) ? 0 : -1;
--
--	return 0;
--}
--
- static unsigned int nf_flow_xmit_xfrm(struct sk_buff *skb,
- 				      const struct nf_hook_state *state,
- 				      struct dst_entry *dst)
-@@ -256,7 +248,7 @@ nf_flow_offload_ip_hook(void *priv, stru
- 
- 	flow_offload_refresh(flow_table, flow);
- 
--	if (nf_flow_offload_dst_check(&rt->dst)) {
-+	if (!dst_check(&rt->dst, 0)) {
- 		flow_offload_teardown(flow);
- 		return NF_ACCEPT;
- 	}
-@@ -476,7 +468,7 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 
- 	flow_offload_refresh(flow_table, flow);
- 
--	if (nf_flow_offload_dst_check(&rt->dst)) {
-+	if (!dst_check(&rt->dst, 0)) {
- 		flow_offload_teardown(flow);
- 		return NF_ACCEPT;
- 	}
diff --git a/target/linux/generic/backport-5.10/610-v5.13-09-netfilter-flowtable-refresh-timeout-after-dst-and-wr.patch b/target/linux/generic/backport-5.10/610-v5.13-09-netfilter-flowtable-refresh-timeout-after-dst-and-wr.patch
deleted file mode 100644
index 14ac2ee29533..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-09-netfilter-flowtable-refresh-timeout-after-dst-and-wr.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Tue, 23 Mar 2021 00:56:27 +0100
-Subject: [PATCH] netfilter: flowtable: refresh timeout after dst and
- writable checks
-
-Refresh the timeout (and retry hardware offload) once the skbuff dst
-is confirmed to be current and after the skbuff is made writable.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -246,8 +246,6 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	if (nf_flow_state_check(flow, iph->protocol, skb, thoff))
- 		return NF_ACCEPT;
- 
--	flow_offload_refresh(flow_table, flow);
--
- 	if (!dst_check(&rt->dst, 0)) {
- 		flow_offload_teardown(flow);
- 		return NF_ACCEPT;
-@@ -256,6 +254,8 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	if (skb_try_make_writable(skb, thoff + hdrsize))
- 		return NF_DROP;
- 
-+	flow_offload_refresh(flow_table, flow);
-+
- 	iph = ip_hdr(skb);
- 	nf_flow_nat_ip(flow, skb, thoff, dir, iph);
- 
-@@ -466,8 +466,6 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 				sizeof(*ip6h)))
- 		return NF_ACCEPT;
- 
--	flow_offload_refresh(flow_table, flow);
--
- 	if (!dst_check(&rt->dst, 0)) {
- 		flow_offload_teardown(flow);
- 		return NF_ACCEPT;
-@@ -476,6 +474,8 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 	if (skb_try_make_writable(skb, sizeof(*ip6h) + hdrsize))
- 		return NF_DROP;
- 
-+	flow_offload_refresh(flow_table, flow);
-+
- 	ip6h = ipv6_hdr(skb);
- 	nf_flow_nat_ipv6(flow, skb, dir, ip6h);
- 
diff --git a/target/linux/generic/backport-5.10/610-v5.13-10-netfilter-nftables-update-table-flags-from-the-commi.patch b/target/linux/generic/backport-5.10/610-v5.13-10-netfilter-nftables-update-table-flags-from-the-commi.patch
deleted file mode 100644
index 964a94a58aea..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-10-netfilter-nftables-update-table-flags-from-the-commi.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Tue, 23 Mar 2021 00:56:28 +0100
-Subject: [PATCH] netfilter: nftables: update table flags from the commit
- phase
-
-Do not update table flags from the preparation phase. Store the flags
-update into the transaction, then update the flags from the commit
-phase.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netfilter/nf_tables.h
-+++ b/include/net/netfilter/nf_tables.h
-@@ -1474,13 +1474,16 @@ struct nft_trans_chain {
- 
- struct nft_trans_table {
- 	bool				update;
--	bool				enable;
-+	u8				state;
-+	u32				flags;
- };
- 
- #define nft_trans_table_update(trans)	\
- 	(((struct nft_trans_table *)trans->data)->update)
--#define nft_trans_table_enable(trans)	\
--	(((struct nft_trans_table *)trans->data)->enable)
-+#define nft_trans_table_state(trans)	\
-+	(((struct nft_trans_table *)trans->data)->state)
-+#define nft_trans_table_flags(trans)	\
-+	(((struct nft_trans_table *)trans->data)->flags)
- 
- struct nft_trans_elem {
- 	struct nft_set			*set;
---- a/net/netfilter/nf_tables_api.c
-+++ b/net/netfilter/nf_tables_api.c
-@@ -917,6 +917,12 @@ static void nf_tables_table_disable(stru
- 	nft_table_disable(net, table, 0);
- }
- 
-+enum {
-+	NFT_TABLE_STATE_UNCHANGED	= 0,
-+	NFT_TABLE_STATE_DORMANT,
-+	NFT_TABLE_STATE_WAKEUP
-+};
-+
- static int nf_tables_updtable(struct nft_ctx *ctx)
- {
- 	struct nft_trans *trans;
-@@ -940,19 +946,17 @@ static int nf_tables_updtable(struct nft
- 
- 	if ((flags & NFT_TABLE_F_DORMANT) &&
- 	    !(ctx->table->flags & NFT_TABLE_F_DORMANT)) {
--		nft_trans_table_enable(trans) = false;
-+		nft_trans_table_state(trans) = NFT_TABLE_STATE_DORMANT;
- 	} else if (!(flags & NFT_TABLE_F_DORMANT) &&
- 		   ctx->table->flags & NFT_TABLE_F_DORMANT) {
--		ctx->table->flags &= ~NFT_TABLE_F_DORMANT;
- 		ret = nf_tables_table_enable(ctx->net, ctx->table);
- 		if (ret >= 0)
--			nft_trans_table_enable(trans) = true;
--		else
--			ctx->table->flags |= NFT_TABLE_F_DORMANT;
-+			nft_trans_table_state(trans) = NFT_TABLE_STATE_WAKEUP;
- 	}
- 	if (ret < 0)
- 		goto err;
- 
-+	nft_trans_table_flags(trans) = flags;
- 	nft_trans_table_update(trans) = true;
- 	list_add_tail(&trans->list, &ctx->net->nft.commit_list);
- 	return 0;
-@@ -7918,11 +7922,10 @@ static int nf_tables_commit(struct net *
- 		switch (trans->msg_type) {
- 		case NFT_MSG_NEWTABLE:
- 			if (nft_trans_table_update(trans)) {
--				if (!nft_trans_table_enable(trans)) {
--					nf_tables_table_disable(net,
--								trans->ctx.table);
--					trans->ctx.table->flags |= NFT_TABLE_F_DORMANT;
--				}
-+				if (nft_trans_table_state(trans) == NFT_TABLE_STATE_DORMANT)
-+					nf_tables_table_disable(net, trans->ctx.table);
-+
-+				trans->ctx.table->flags = nft_trans_table_flags(trans);
- 			} else {
- 				nft_clear(net, trans->ctx.table);
- 			}
-@@ -8139,11 +8142,9 @@ static int __nf_tables_abort(struct net
- 		switch (trans->msg_type) {
- 		case NFT_MSG_NEWTABLE:
- 			if (nft_trans_table_update(trans)) {
--				if (nft_trans_table_enable(trans)) {
--					nf_tables_table_disable(net,
--								trans->ctx.table);
--					trans->ctx.table->flags |= NFT_TABLE_F_DORMANT;
--				}
-+				if (nft_trans_table_state(trans) == NFT_TABLE_STATE_WAKEUP)
-+					nf_tables_table_disable(net, trans->ctx.table);
-+
- 				nft_trans_destroy(trans);
- 			} else {
- 				list_del_rcu(&trans->ctx.table->list);
diff --git a/target/linux/generic/backport-5.10/610-v5.13-11-net-resolve-forwarding-path-from-virtual-netdevice-a.patch b/target/linux/generic/backport-5.10/610-v5.13-11-net-resolve-forwarding-path-from-virtual-netdevice-a.patch
deleted file mode 100644
index b3c0c2e9271f..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-11-net-resolve-forwarding-path-from-virtual-netdevice-a.patch
+++ /dev/null
@@ -1,170 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:32 +0100
-Subject: [PATCH] net: resolve forwarding path from virtual netdevice and
- HW destination address
-
-This patch adds dev_fill_forward_path() which resolves the path to reach
-the real netdevice from the IP forwarding side. This function takes as
-input the netdevice and the destination hardware address and it walks
-down the devices calling .ndo_fill_forward_path() for each device until
-the real device is found.
-
-For instance, assuming the following topology:
-
-               IP forwarding
-              /             \
-           br0              eth0
-           / \
-       eth1  eth2
-        .
-        .
-        .
-       ethX
- ab:cd:ef:ab:cd:ef
-
-where eth1 and eth2 are bridge ports and eth0 provides WAN connectivity.
-ethX is the interface in another box which is connected to the eth1
-bridge port.
-
-For packets going through IP forwarding to br0 whose destination MAC
-address is ab:cd:ef:ab:cd:ef, dev_fill_forward_path() provides the
-following path:
-
-	br0 -> eth1
-
-.ndo_fill_forward_path for br0 looks up at the FDB for the bridge port
-from the destination MAC address to get the bridge port eth1.
-
-This information allows to create a fast path that bypasses the classic
-bridge and IP forwarding paths, so packets go directly from the bridge
-port eth1 to eth0 (wan interface) and vice versa.
-
-             fast path
-      .------------------------.
-     /                          \
-    |           IP forwarding   |
-    |          /             \  \/
-    |       br0               eth0
-    .       / \
-     -> eth1  eth2
-        .
-        .
-        .
-       ethX
- ab:cd:ef:ab:cd:ef
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -850,6 +850,27 @@ typedef u16 (*select_queue_fallback_t)(s
- 				       struct sk_buff *skb,
- 				       struct net_device *sb_dev);
- 
-+enum net_device_path_type {
-+	DEV_PATH_ETHERNET = 0,
-+};
-+
-+struct net_device_path {
-+	enum net_device_path_type	type;
-+	const struct net_device		*dev;
-+};
-+
-+#define NET_DEVICE_PATH_STACK_MAX	5
-+
-+struct net_device_path_stack {
-+	int			num_paths;
-+	struct net_device_path	path[NET_DEVICE_PATH_STACK_MAX];
-+};
-+
-+struct net_device_path_ctx {
-+	const struct net_device *dev;
-+	const u8		*daddr;
-+};
-+
- enum tc_setup_type {
- 	TC_SETUP_QDISC_MQPRIO,
- 	TC_SETUP_CLSU32,
-@@ -1296,6 +1317,8 @@ struct netdev_net_notifier {
-  * struct net_device *(*ndo_get_peer_dev)(struct net_device *dev);
-  *	If a device is paired with a peer device, return the peer instance.
-  *	The caller must be under RCU read context.
-+ * int (*ndo_fill_forward_path)(struct net_device_path_ctx *ctx, struct net_device_path *path);
-+ *     Get the forwarding path to reach the real device from the HW destination address
-  */
- struct net_device_ops {
- 	int			(*ndo_init)(struct net_device *dev);
-@@ -1504,6 +1527,8 @@ struct net_device_ops {
- 	int			(*ndo_tunnel_ctl)(struct net_device *dev,
- 						  struct ip_tunnel_parm *p, int cmd);
- 	struct net_device *	(*ndo_get_peer_dev)(struct net_device *dev);
-+	int                     (*ndo_fill_forward_path)(struct net_device_path_ctx *ctx,
-+                                                         struct net_device_path *path);
- };
- 
- /**
-@@ -2851,6 +2876,8 @@ void dev_remove_offload(struct packet_of
- 
- int dev_get_iflink(const struct net_device *dev);
- int dev_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb);
-+int dev_fill_forward_path(const struct net_device *dev, const u8 *daddr,
-+			  struct net_device_path_stack *stack);
- struct net_device *__dev_get_by_flags(struct net *net, unsigned short flags,
- 				      unsigned short mask);
- struct net_device *dev_get_by_name(struct net *net, const char *name);
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -847,6 +847,52 @@ int dev_fill_metadata_dst(struct net_dev
- }
- EXPORT_SYMBOL_GPL(dev_fill_metadata_dst);
- 
-+static struct net_device_path *dev_fwd_path(struct net_device_path_stack *stack)
-+{
-+	int k = stack->num_paths++;
-+
-+	if (WARN_ON_ONCE(k >= NET_DEVICE_PATH_STACK_MAX))
-+		return NULL;
-+
-+	return &stack->path[k];
-+}
-+
-+int dev_fill_forward_path(const struct net_device *dev, const u8 *daddr,
-+			  struct net_device_path_stack *stack)
-+{
-+	const struct net_device *last_dev;
-+	struct net_device_path_ctx ctx = {
-+		.dev	= dev,
-+		.daddr	= daddr,
-+	};
-+	struct net_device_path *path;
-+	int ret = 0;
-+
-+	stack->num_paths = 0;
-+	while (ctx.dev && ctx.dev->netdev_ops->ndo_fill_forward_path) {
-+		last_dev = ctx.dev;
-+		path = dev_fwd_path(stack);
-+		if (!path)
-+			return -1;
-+
-+		memset(path, 0, sizeof(struct net_device_path));
-+		ret = ctx.dev->netdev_ops->ndo_fill_forward_path(&ctx, path);
-+		if (ret < 0)
-+			return -1;
-+
-+		if (WARN_ON_ONCE(last_dev == ctx.dev))
-+			return -1;
-+	}
-+	path = dev_fwd_path(stack);
-+	if (!path)
-+		return -1;
-+	path->type = DEV_PATH_ETHERNET;
-+	path->dev = ctx.dev;
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL_GPL(dev_fill_forward_path);
-+
- /**
-  *	__dev_get_by_name	- find a device by its name
-  *	@net: the applicable net namespace
diff --git a/target/linux/generic/backport-5.10/610-v5.13-12-net-8021q-resolve-forwarding-path-for-vlan-devices.patch b/target/linux/generic/backport-5.10/610-v5.13-12-net-8021q-resolve-forwarding-path-for-vlan-devices.patch
deleted file mode 100644
index a906dc06ce01..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-12-net-8021q-resolve-forwarding-path-for-vlan-devices.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:33 +0100
-Subject: [PATCH] net: 8021q: resolve forwarding path for vlan devices
-
-Add .ndo_fill_forward_path for vlan devices.
-
-For instance, assuming the following topology:
-
-                   IP forwarding
-                  /             \
-            eth0.100             eth0
-            |
-            eth0
-            .
-            .
-            .
-           ethX
-     ab:cd:ef:ab:cd:ef
-
-For packets going through IP forwarding to eth0.100 whose destination
-MAC address is ab:cd:ef:ab:cd:ef, dev_fill_forward_path() provides the
-following path:
-
-        eth0.100 -> eth0
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -852,11 +852,18 @@ typedef u16 (*select_queue_fallback_t)(s
- 
- enum net_device_path_type {
- 	DEV_PATH_ETHERNET = 0,
-+	DEV_PATH_VLAN,
- };
- 
- struct net_device_path {
- 	enum net_device_path_type	type;
- 	const struct net_device		*dev;
-+	union {
-+		struct {
-+			u16		id;
-+			__be16		proto;
-+		} encap;
-+	};
- };
- 
- #define NET_DEVICE_PATH_STACK_MAX	5
---- a/net/8021q/vlan_dev.c
-+++ b/net/8021q/vlan_dev.c
-@@ -770,6 +770,20 @@ static int vlan_dev_get_iflink(const str
- 	return real_dev->ifindex;
- }
- 
-+static int vlan_dev_fill_forward_path(struct net_device_path_ctx *ctx,
-+				      struct net_device_path *path)
-+{
-+	struct vlan_dev_priv *vlan = vlan_dev_priv(ctx->dev);
-+
-+	path->type = DEV_PATH_VLAN;
-+	path->encap.id = vlan->vlan_id;
-+	path->encap.proto = vlan->vlan_proto;
-+	path->dev = ctx->dev;
-+	ctx->dev = vlan->real_dev;
-+
-+	return 0;
-+}
-+
- static const struct ethtool_ops vlan_ethtool_ops = {
- 	.get_link_ksettings	= vlan_ethtool_get_link_ksettings,
- 	.get_drvinfo	        = vlan_ethtool_get_drvinfo,
-@@ -808,6 +822,7 @@ static const struct net_device_ops vlan_
- #endif
- 	.ndo_fix_features	= vlan_dev_fix_features,
- 	.ndo_get_iflink		= vlan_dev_get_iflink,
-+	.ndo_fill_forward_path	= vlan_dev_fill_forward_path,
- };
- 
- static void vlan_dev_free(struct net_device *dev)
diff --git a/target/linux/generic/backport-5.10/610-v5.13-13-net-bridge-resolve-forwarding-path-for-bridge-device.patch b/target/linux/generic/backport-5.10/610-v5.13-13-net-bridge-resolve-forwarding-path-for-bridge-device.patch
deleted file mode 100644
index f5a6dd6ebc1c..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-13-net-bridge-resolve-forwarding-path-for-bridge-device.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:34 +0100
-Subject: [PATCH] net: bridge: resolve forwarding path for bridge devices
-
-Add .ndo_fill_forward_path for bridge devices.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -853,6 +853,7 @@ typedef u16 (*select_queue_fallback_t)(s
- enum net_device_path_type {
- 	DEV_PATH_ETHERNET = 0,
- 	DEV_PATH_VLAN,
-+	DEV_PATH_BRIDGE,
- };
- 
- struct net_device_path {
---- a/net/bridge/br_device.c
-+++ b/net/bridge/br_device.c
-@@ -398,6 +398,32 @@ static int br_del_slave(struct net_devic
- 	return br_del_if(br, slave_dev);
- }
- 
-+static int br_fill_forward_path(struct net_device_path_ctx *ctx,
-+				struct net_device_path *path)
-+{
-+	struct net_bridge_fdb_entry *f;
-+	struct net_bridge_port *dst;
-+	struct net_bridge *br;
-+
-+	if (netif_is_bridge_port(ctx->dev))
-+		return -1;
-+
-+	br = netdev_priv(ctx->dev);
-+	f = br_fdb_find_rcu(br, ctx->daddr, 0);
-+	if (!f || !f->dst)
-+		return -1;
-+
-+	dst = READ_ONCE(f->dst);
-+	if (!dst)
-+		return -1;
-+
-+	path->type = DEV_PATH_BRIDGE;
-+	path->dev = dst->br->dev;
-+	ctx->dev = dst->dev;
-+
-+	return 0;
-+}
-+
- static const struct ethtool_ops br_ethtool_ops = {
- 	.get_drvinfo		 = br_getinfo,
- 	.get_link		 = ethtool_op_get_link,
-@@ -432,6 +458,7 @@ static const struct net_device_ops br_ne
- 	.ndo_bridge_setlink	 = br_setlink,
- 	.ndo_bridge_dellink	 = br_dellink,
- 	.ndo_features_check	 = passthru_features_check,
-+	.ndo_fill_forward_path	 = br_fill_forward_path,
- };
- 
- static struct device_type br_type = {
diff --git a/target/linux/generic/backport-5.10/610-v5.13-14-net-bridge-resolve-forwarding-path-for-VLAN-tag-acti.patch b/target/linux/generic/backport-5.10/610-v5.13-14-net-bridge-resolve-forwarding-path-for-VLAN-tag-acti.patch
deleted file mode 100644
index 9e62546a6cc0..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-14-net-bridge-resolve-forwarding-path-for-VLAN-tag-acti.patch
+++ /dev/null
@@ -1,207 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 24 Mar 2021 02:30:35 +0100
-Subject: [PATCH] net: bridge: resolve forwarding path for VLAN tag
- actions in bridge devices
-
-Depending on the VLAN settings of the bridge and the port, the bridge can
-either add or remove a tag. When vlan filtering is enabled, the fdb lookup
-also needs to know the VLAN tag/proto for the destination address
-To provide this, keep track of the stack of VLAN tags for the path in the
-lookup context
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -864,10 +864,20 @@ struct net_device_path {
- 			u16		id;
- 			__be16		proto;
- 		} encap;
-+		struct {
-+			enum {
-+				DEV_PATH_BR_VLAN_KEEP,
-+				DEV_PATH_BR_VLAN_TAG,
-+				DEV_PATH_BR_VLAN_UNTAG,
-+			}		vlan_mode;
-+			u16		vlan_id;
-+			__be16		vlan_proto;
-+		} bridge;
- 	};
- };
- 
- #define NET_DEVICE_PATH_STACK_MAX	5
-+#define NET_DEVICE_PATH_VLAN_MAX	2
- 
- struct net_device_path_stack {
- 	int			num_paths;
-@@ -877,6 +887,12 @@ struct net_device_path_stack {
- struct net_device_path_ctx {
- 	const struct net_device *dev;
- 	const u8		*daddr;
-+
-+	int			num_vlans;
-+	struct {
-+		u16		id;
-+		__be16		proto;
-+	} vlan[NET_DEVICE_PATH_VLAN_MAX];
- };
- 
- enum tc_setup_type {
---- a/net/8021q/vlan_dev.c
-+++ b/net/8021q/vlan_dev.c
-@@ -780,6 +780,12 @@ static int vlan_dev_fill_forward_path(st
- 	path->encap.proto = vlan->vlan_proto;
- 	path->dev = ctx->dev;
- 	ctx->dev = vlan->real_dev;
-+	if (ctx->num_vlans >= ARRAY_SIZE(ctx->vlan))
-+		return -ENOSPC;
-+
-+	ctx->vlan[ctx->num_vlans].id = vlan->vlan_id;
-+	ctx->vlan[ctx->num_vlans].proto = vlan->vlan_proto;
-+	ctx->num_vlans++;
- 
- 	return 0;
- }
---- a/net/bridge/br_device.c
-+++ b/net/bridge/br_device.c
-@@ -409,7 +409,10 @@ static int br_fill_forward_path(struct n
- 		return -1;
- 
- 	br = netdev_priv(ctx->dev);
--	f = br_fdb_find_rcu(br, ctx->daddr, 0);
-+
-+	br_vlan_fill_forward_path_pvid(br, ctx, path);
-+
-+	f = br_fdb_find_rcu(br, ctx->daddr, path->bridge.vlan_id);
- 	if (!f || !f->dst)
- 		return -1;
- 
-@@ -417,10 +420,28 @@ static int br_fill_forward_path(struct n
- 	if (!dst)
- 		return -1;
- 
-+	if (br_vlan_fill_forward_path_mode(br, dst, path))
-+		return -1;
-+
- 	path->type = DEV_PATH_BRIDGE;
- 	path->dev = dst->br->dev;
- 	ctx->dev = dst->dev;
- 
-+	switch (path->bridge.vlan_mode) {
-+	case DEV_PATH_BR_VLAN_TAG:
-+		if (ctx->num_vlans >= ARRAY_SIZE(ctx->vlan))
-+			return -ENOSPC;
-+		ctx->vlan[ctx->num_vlans].id = path->bridge.vlan_id;
-+		ctx->vlan[ctx->num_vlans].proto = path->bridge.vlan_proto;
-+		ctx->num_vlans++;
-+		break;
-+	case DEV_PATH_BR_VLAN_UNTAG:
-+		ctx->num_vlans--;
-+		break;
-+	case DEV_PATH_BR_VLAN_KEEP:
-+		break;
-+	}
-+
- 	return 0;
- }
- 
---- a/net/bridge/br_private.h
-+++ b/net/bridge/br_private.h
-@@ -1093,6 +1093,13 @@ void br_vlan_notify(const struct net_bri
- bool br_vlan_can_enter_range(const struct net_bridge_vlan *v_curr,
- 			     const struct net_bridge_vlan *range_end);
- 
-+void br_vlan_fill_forward_path_pvid(struct net_bridge *br,
-+				    struct net_device_path_ctx *ctx,
-+				    struct net_device_path *path);
-+int br_vlan_fill_forward_path_mode(struct net_bridge *br,
-+				   struct net_bridge_port *dst,
-+				   struct net_device_path *path);
-+
- static inline struct net_bridge_vlan_group *br_vlan_group(
- 					const struct net_bridge *br)
- {
-@@ -1250,6 +1257,19 @@ static inline int nbp_get_num_vlan_infos
- {
- 	return 0;
- }
-+
-+static inline void br_vlan_fill_forward_path_pvid(struct net_bridge *br,
-+						  struct net_device_path_ctx *ctx,
-+						  struct net_device_path *path)
-+{
-+}
-+
-+static inline int br_vlan_fill_forward_path_mode(struct net_bridge *br,
-+						 struct net_bridge_port *dst,
-+						 struct net_device_path *path)
-+{
-+	return 0;
-+}
- 
- static inline struct net_bridge_vlan_group *br_vlan_group(
- 					const struct net_bridge *br)
---- a/net/bridge/br_vlan.c
-+++ b/net/bridge/br_vlan.c
-@@ -1350,6 +1350,59 @@ int br_vlan_get_pvid_rcu(const struct ne
- }
- EXPORT_SYMBOL_GPL(br_vlan_get_pvid_rcu);
- 
-+void br_vlan_fill_forward_path_pvid(struct net_bridge *br,
-+				    struct net_device_path_ctx *ctx,
-+				    struct net_device_path *path)
-+{
-+	struct net_bridge_vlan_group *vg;
-+	int idx = ctx->num_vlans - 1;
-+	u16 vid;
-+
-+	path->bridge.vlan_mode = DEV_PATH_BR_VLAN_KEEP;
-+
-+	if (!br_opt_get(br, BROPT_VLAN_ENABLED))
-+		return;
-+
-+	vg = br_vlan_group(br);
-+
-+	if (idx >= 0 &&
-+	    ctx->vlan[idx].proto == br->vlan_proto) {
-+		vid = ctx->vlan[idx].id;
-+	} else {
-+		path->bridge.vlan_mode = DEV_PATH_BR_VLAN_TAG;
-+		vid = br_get_pvid(vg);
-+	}
-+
-+	path->bridge.vlan_id = vid;
-+	path->bridge.vlan_proto = br->vlan_proto;
-+}
-+
-+int br_vlan_fill_forward_path_mode(struct net_bridge *br,
-+				   struct net_bridge_port *dst,
-+				   struct net_device_path *path)
-+{
-+	struct net_bridge_vlan_group *vg;
-+	struct net_bridge_vlan *v;
-+
-+	if (!br_opt_get(br, BROPT_VLAN_ENABLED))
-+		return 0;
-+
-+	vg = nbp_vlan_group_rcu(dst);
-+	v = br_vlan_find(vg, path->bridge.vlan_id);
-+	if (!v || !br_vlan_should_use(v))
-+		return -EINVAL;
-+
-+	if (!(v->flags & BRIDGE_VLAN_INFO_UNTAGGED))
-+		return 0;
-+
-+	if (path->bridge.vlan_mode == DEV_PATH_BR_VLAN_TAG)
-+		path->bridge.vlan_mode = DEV_PATH_BR_VLAN_KEEP;
-+	else
-+		path->bridge.vlan_mode = DEV_PATH_BR_VLAN_UNTAG;
-+
-+	return 0;
-+}
-+
- int br_vlan_get_info(const struct net_device *dev, u16 vid,
- 		     struct bridge_vlan_info *p_vinfo)
- {
diff --git a/target/linux/generic/backport-5.10/610-v5.13-15-net-ppp-resolve-forwarding-path-for-bridge-pppoe-dev.patch b/target/linux/generic/backport-5.10/610-v5.13-15-net-ppp-resolve-forwarding-path-for-bridge-pppoe-dev.patch
deleted file mode 100644
index c714ff05841a..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-15-net-ppp-resolve-forwarding-path-for-bridge-pppoe-dev.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 24 Mar 2021 02:30:36 +0100
-Subject: [PATCH] net: ppp: resolve forwarding path for bridge pppoe
- devices
-
-Pass on the PPPoE session ID, destination hardware address and the real
-device.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/drivers/net/ppp/ppp_generic.c
-+++ b/drivers/net/ppp/ppp_generic.c
-@@ -1466,12 +1466,34 @@ static void ppp_dev_priv_destructor(stru
- 		ppp_destroy_interface(ppp);
- }
- 
-+static int ppp_fill_forward_path(struct net_device_path_ctx *ctx,
-+				 struct net_device_path *path)
-+{
-+	struct ppp *ppp = netdev_priv(ctx->dev);
-+	struct ppp_channel *chan;
-+	struct channel *pch;
-+
-+	if (ppp->flags & SC_MULTILINK)
-+		return -EOPNOTSUPP;
-+
-+	if (list_empty(&ppp->channels))
-+		return -ENODEV;
-+
-+	pch = list_first_entry(&ppp->channels, struct channel, clist);
-+	chan = pch->chan;
-+	if (!chan->ops->fill_forward_path)
-+		return -EOPNOTSUPP;
-+
-+	return chan->ops->fill_forward_path(ctx, path, chan);
-+}
-+
- static const struct net_device_ops ppp_netdev_ops = {
- 	.ndo_init	 = ppp_dev_init,
- 	.ndo_uninit      = ppp_dev_uninit,
- 	.ndo_start_xmit  = ppp_start_xmit,
- 	.ndo_do_ioctl    = ppp_net_ioctl,
- 	.ndo_get_stats64 = ppp_get_stats64,
-+	.ndo_fill_forward_path = ppp_fill_forward_path,
- };
- 
- static struct device_type ppp_type = {
---- a/drivers/net/ppp/pppoe.c
-+++ b/drivers/net/ppp/pppoe.c
-@@ -972,8 +972,31 @@ static int pppoe_xmit(struct ppp_channel
- 	return __pppoe_xmit(sk, skb);
- }
- 
-+static int pppoe_fill_forward_path(struct net_device_path_ctx *ctx,
-+				   struct net_device_path *path,
-+				   const struct ppp_channel *chan)
-+{
-+	struct sock *sk = (struct sock *)chan->private;
-+	struct pppox_sock *po = pppox_sk(sk);
-+	struct net_device *dev = po->pppoe_dev;
-+
-+	if (sock_flag(sk, SOCK_DEAD) ||
-+	    !(sk->sk_state & PPPOX_CONNECTED) || !dev)
-+		return -1;
-+
-+	path->type = DEV_PATH_PPPOE;
-+	path->encap.proto = htons(ETH_P_PPP_SES);
-+	path->encap.id = be16_to_cpu(po->num);
-+	memcpy(path->encap.h_dest, po->pppoe_pa.remote, ETH_ALEN);
-+	path->dev = ctx->dev;
-+	ctx->dev = dev;
-+
-+	return 0;
-+}
-+
- static const struct ppp_channel_ops pppoe_chan_ops = {
- 	.start_xmit = pppoe_xmit,
-+	.fill_forward_path = pppoe_fill_forward_path,
- };
- 
- static int pppoe_recvmsg(struct socket *sock, struct msghdr *m,
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -854,6 +854,7 @@ enum net_device_path_type {
- 	DEV_PATH_ETHERNET = 0,
- 	DEV_PATH_VLAN,
- 	DEV_PATH_BRIDGE,
-+	DEV_PATH_PPPOE,
- };
- 
- struct net_device_path {
-@@ -863,6 +864,7 @@ struct net_device_path {
- 		struct {
- 			u16		id;
- 			__be16		proto;
-+			u8		h_dest[ETH_ALEN];
- 		} encap;
- 		struct {
- 			enum {
---- a/include/linux/ppp_channel.h
-+++ b/include/linux/ppp_channel.h
-@@ -28,6 +28,9 @@ struct ppp_channel_ops {
- 	int	(*start_xmit)(struct ppp_channel *, struct sk_buff *);
- 	/* Handle an ioctl call that has come in via /dev/ppp. */
- 	int	(*ioctl)(struct ppp_channel *, unsigned int, unsigned long);
-+	int	(*fill_forward_path)(struct net_device_path_ctx *,
-+				     struct net_device_path *,
-+				     const struct ppp_channel *);
- };
- 
- struct ppp_channel {
diff --git a/target/linux/generic/backport-5.10/610-v5.13-16-net-dsa-resolve-forwarding-path-for-dsa-slave-ports.patch b/target/linux/generic/backport-5.10/610-v5.13-16-net-dsa-resolve-forwarding-path-for-dsa-slave-ports.patch
deleted file mode 100644
index a277f0ccf043..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-16-net-dsa-resolve-forwarding-path-for-dsa-slave-ports.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 24 Mar 2021 02:30:37 +0100
-Subject: [PATCH] net: dsa: resolve forwarding path for dsa slave ports
-
-Add .ndo_fill_forward_path for dsa slave port devices
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -855,6 +855,7 @@ enum net_device_path_type {
- 	DEV_PATH_VLAN,
- 	DEV_PATH_BRIDGE,
- 	DEV_PATH_PPPOE,
-+	DEV_PATH_DSA,
- };
- 
- struct net_device_path {
-@@ -875,6 +876,10 @@ struct net_device_path {
- 			u16		vlan_id;
- 			__be16		vlan_proto;
- 		} bridge;
-+		struct {
-+			int port;
-+			u16 proto;
-+		} dsa;
- 	};
- };
- 
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1619,6 +1619,21 @@ static struct devlink_port *dsa_slave_ge
- 	return dp->ds->devlink ? &dp->devlink_port : NULL;
- }
- 
-+static int dsa_slave_fill_forward_path(struct net_device_path_ctx *ctx,
-+				       struct net_device_path *path)
-+{
-+	struct dsa_port *dp = dsa_slave_to_port(ctx->dev);
-+	struct dsa_port *cpu_dp = dp->cpu_dp;
-+
-+	path->dev = ctx->dev;
-+	path->type = DEV_PATH_DSA;
-+	path->dsa.proto = cpu_dp->tag_ops->proto;
-+	path->dsa.port = dp->index;
-+	ctx->dev = cpu_dp->master;
-+
-+	return 0;
-+}
-+
- static const struct net_device_ops dsa_slave_netdev_ops = {
- 	.ndo_open	 	= dsa_slave_open,
- 	.ndo_stop		= dsa_slave_close,
-@@ -1644,6 +1659,7 @@ static const struct net_device_ops dsa_s
- 	.ndo_vlan_rx_kill_vid	= dsa_slave_vlan_rx_kill_vid,
- 	.ndo_get_devlink_port	= dsa_slave_get_devlink_port,
- 	.ndo_change_mtu		= dsa_slave_change_mtu,
-+	.ndo_fill_forward_path	= dsa_slave_fill_forward_path,
- };
- 
- static struct device_type dsa_type = {
diff --git a/target/linux/generic/backport-5.10/610-v5.13-17-netfilter-flowtable-add-xmit-path-types.patch b/target/linux/generic/backport-5.10/610-v5.13-17-netfilter-flowtable-add-xmit-path-types.patch
deleted file mode 100644
index 6052f67faab8..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-17-netfilter-flowtable-add-xmit-path-types.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:38 +0100
-Subject: [PATCH] netfilter: flowtable: add xmit path types
-
-Add the xmit_type field that defines the two supported xmit paths in the
-flowtable data plane, which are the neighbour and the xfrm xmit paths.
-This patch prepares for new flowtable xmit path types to come.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -89,6 +89,11 @@ enum flow_offload_tuple_dir {
- };
- #define FLOW_OFFLOAD_DIR_MAX	IP_CT_DIR_MAX
- 
-+enum flow_offload_xmit_type {
-+	FLOW_OFFLOAD_XMIT_NEIGH		= 0,
-+	FLOW_OFFLOAD_XMIT_XFRM,
-+};
-+
- struct flow_offload_tuple {
- 	union {
- 		struct in_addr		src_v4;
-@@ -111,7 +116,8 @@ struct flow_offload_tuple {
- 	/* All members above are keys for lookups, see flow_offload_hash(). */
- 	struct { }			__hash;
- 
--	u8				dir;
-+	u8				dir:6,
-+					xmit_type:2;
- 
- 	u16				mtu;
- 
-@@ -157,7 +163,8 @@ static inline __s32 nf_flow_timeout_delt
- 
- struct nf_flow_route {
- 	struct {
--		struct dst_entry	*dst;
-+		struct dst_entry		*dst;
-+		enum flow_offload_xmit_type	xmit_type;
- 	} tuple[FLOW_OFFLOAD_DIR_MAX];
- };
- 
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -95,6 +95,7 @@ static int flow_offload_fill_route(struc
- 	}
- 
- 	flow_tuple->iifidx = other_dst->dev->ifindex;
-+	flow_tuple->xmit_type = route->tuple[dir].xmit_type;
- 	flow_tuple->dst_cache = dst;
- 
- 	return 0;
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -235,8 +235,6 @@ nf_flow_offload_ip_hook(void *priv, stru
- 
- 	dir = tuplehash->tuple.dir;
- 	flow = container_of(tuplehash, struct flow_offload, tuplehash[dir]);
--	rt = (struct rtable *)flow->tuplehash[dir].tuple.dst_cache;
--	outdev = rt->dst.dev;
- 
- 	if (unlikely(nf_flow_exceeds_mtu(skb, flow->tuplehash[dir].tuple.mtu)))
- 		return NF_ACCEPT;
-@@ -265,13 +263,16 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	if (flow_table->flags & NF_FLOWTABLE_COUNTER)
- 		nf_ct_acct_update(flow->ct, tuplehash->tuple.dir, skb->len);
- 
--	if (unlikely(dst_xfrm(&rt->dst))) {
-+	rt = (struct rtable *)tuplehash->tuple.dst_cache;
-+
-+	if (unlikely(tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)) {
- 		memset(skb->cb, 0, sizeof(struct inet_skb_parm));
- 		IPCB(skb)->iif = skb->dev->ifindex;
- 		IPCB(skb)->flags = IPSKB_FORWARDED;
- 		return nf_flow_xmit_xfrm(skb, state, &rt->dst);
- 	}
- 
-+	outdev = rt->dst.dev;
- 	skb->dev = outdev;
- 	nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr);
- 	skb_dst_set_noref(skb, &rt->dst);
-@@ -456,8 +457,6 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 
- 	dir = tuplehash->tuple.dir;
- 	flow = container_of(tuplehash, struct flow_offload, tuplehash[dir]);
--	rt = (struct rt6_info *)flow->tuplehash[dir].tuple.dst_cache;
--	outdev = rt->dst.dev;
- 
- 	if (unlikely(nf_flow_exceeds_mtu(skb, flow->tuplehash[dir].tuple.mtu)))
- 		return NF_ACCEPT;
-@@ -485,13 +484,16 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 	if (flow_table->flags & NF_FLOWTABLE_COUNTER)
- 		nf_ct_acct_update(flow->ct, tuplehash->tuple.dir, skb->len);
- 
--	if (unlikely(dst_xfrm(&rt->dst))) {
-+	rt = (struct rt6_info *)tuplehash->tuple.dst_cache;
-+
-+	if (unlikely(tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)) {
- 		memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
- 		IP6CB(skb)->iif = skb->dev->ifindex;
- 		IP6CB(skb)->flags = IP6SKB_FORWARDED;
- 		return nf_flow_xmit_xfrm(skb, state, &rt->dst);
- 	}
- 
-+	outdev = rt->dst.dev;
- 	skb->dev = outdev;
- 	nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6);
- 	skb_dst_set_noref(skb, &rt->dst);
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -19,6 +19,22 @@ struct nft_flow_offload {
- 	struct nft_flowtable	*flowtable;
- };
- 
-+static enum flow_offload_xmit_type nft_xmit_type(struct dst_entry *dst)
-+{
-+	if (dst_xfrm(dst))
-+		return FLOW_OFFLOAD_XMIT_XFRM;
-+
-+	return FLOW_OFFLOAD_XMIT_NEIGH;
-+}
-+
-+static void nft_default_forward_path(struct nf_flow_route *route,
-+				     struct dst_entry *dst_cache,
-+				     enum ip_conntrack_dir dir)
-+{
-+	route->tuple[dir].dst		= dst_cache;
-+	route->tuple[dir].xmit_type	= nft_xmit_type(dst_cache);
-+}
-+
- static int nft_flow_route(const struct nft_pktinfo *pkt,
- 			  const struct nf_conn *ct,
- 			  struct nf_flow_route *route,
-@@ -44,8 +60,8 @@ static int nft_flow_route(const struct n
- 	if (!other_dst)
- 		return -ENOENT;
- 
--	route->tuple[dir].dst		= this_dst;
--	route->tuple[!dir].dst		= other_dst;
-+	nft_default_forward_path(route, this_dst, dir);
-+	nft_default_forward_path(route, other_dst, !dir);
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-5.10/610-v5.13-18-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch b/target/linux/generic/backport-5.10/610-v5.13-18-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch
deleted file mode 100644
index 9541ce886730..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-18-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch
+++ /dev/null
@@ -1,191 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:39 +0100
-Subject: [PATCH] netfilter: flowtable: use dev_fill_forward_path() to
- obtain ingress device
-
-Obtain the ingress device in the tuple from the route in the reply
-direction. Use dev_fill_forward_path() instead to get the real ingress
-device for this flow.
-
-Fall back to use the ingress device that the IP forwarding route
-provides if:
-
-- dev_fill_forward_path() finds no real ingress device.
-- the ingress device that is obtained is not part of the flowtable
-  devices.
-- this route has a xfrm policy.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -164,6 +164,9 @@ static inline __s32 nf_flow_timeout_delt
- struct nf_flow_route {
- 	struct {
- 		struct dst_entry		*dst;
-+		struct {
-+			u32			ifindex;
-+		} in;
- 		enum flow_offload_xmit_type	xmit_type;
- 	} tuple[FLOW_OFFLOAD_DIR_MAX];
- };
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -79,7 +79,6 @@ static int flow_offload_fill_route(struc
- 				   enum flow_offload_tuple_dir dir)
- {
- 	struct flow_offload_tuple *flow_tuple = &flow->tuplehash[dir].tuple;
--	struct dst_entry *other_dst = route->tuple[!dir].dst;
- 	struct dst_entry *dst = route->tuple[dir].dst;
- 
- 	if (!dst_hold_safe(route->tuple[dir].dst))
-@@ -94,7 +93,7 @@ static int flow_offload_fill_route(struc
- 		break;
- 	}
- 
--	flow_tuple->iifidx = other_dst->dev->ifindex;
-+	flow_tuple->iifidx = route->tuple[dir].in.ifindex;
- 	flow_tuple->xmit_type = route->tuple[dir].xmit_type;
- 	flow_tuple->dst_cache = dst;
- 
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -31,14 +31,104 @@ static void nft_default_forward_path(str
- 				     struct dst_entry *dst_cache,
- 				     enum ip_conntrack_dir dir)
- {
-+	route->tuple[!dir].in.ifindex	= dst_cache->dev->ifindex;
- 	route->tuple[dir].dst		= dst_cache;
- 	route->tuple[dir].xmit_type	= nft_xmit_type(dst_cache);
- }
- 
-+static int nft_dev_fill_forward_path(const struct nf_flow_route *route,
-+				     const struct dst_entry *dst_cache,
-+				     const struct nf_conn *ct,
-+				     enum ip_conntrack_dir dir,
-+				     struct net_device_path_stack *stack)
-+{
-+	const void *daddr = &ct->tuplehash[!dir].tuple.src.u3;
-+	struct net_device *dev = dst_cache->dev;
-+	unsigned char ha[ETH_ALEN];
-+	struct neighbour *n;
-+	u8 nud_state;
-+
-+	n = dst_neigh_lookup(dst_cache, daddr);
-+	if (!n)
-+		return -1;
-+
-+	read_lock_bh(&n->lock);
-+	nud_state = n->nud_state;
-+	ether_addr_copy(ha, n->ha);
-+	read_unlock_bh(&n->lock);
-+	neigh_release(n);
-+
-+	if (!(nud_state & NUD_VALID))
-+		return -1;
-+
-+	return dev_fill_forward_path(dev, ha, stack);
-+}
-+
-+struct nft_forward_info {
-+	const struct net_device *indev;
-+};
-+
-+static void nft_dev_path_info(const struct net_device_path_stack *stack,
-+			      struct nft_forward_info *info)
-+{
-+	const struct net_device_path *path;
-+	int i;
-+
-+	for (i = 0; i < stack->num_paths; i++) {
-+		path = &stack->path[i];
-+		switch (path->type) {
-+		case DEV_PATH_ETHERNET:
-+			info->indev = path->dev;
-+			break;
-+		case DEV_PATH_VLAN:
-+		case DEV_PATH_BRIDGE:
-+		default:
-+			info->indev = NULL;
-+			break;
-+		}
-+	}
-+}
-+
-+static bool nft_flowtable_find_dev(const struct net_device *dev,
-+				   struct nft_flowtable *ft)
-+{
-+	struct nft_hook *hook;
-+	bool found = false;
-+
-+	list_for_each_entry_rcu(hook, &ft->hook_list, list) {
-+		if (hook->ops.dev != dev)
-+			continue;
-+
-+		found = true;
-+		break;
-+	}
-+
-+	return found;
-+}
-+
-+static void nft_dev_forward_path(struct nf_flow_route *route,
-+				 const struct nf_conn *ct,
-+				 enum ip_conntrack_dir dir,
-+				 struct nft_flowtable *ft)
-+{
-+	const struct dst_entry *dst = route->tuple[dir].dst;
-+	struct net_device_path_stack stack;
-+	struct nft_forward_info info = {};
-+
-+	if (nft_dev_fill_forward_path(route, dst, ct, dir, &stack) >= 0)
-+		nft_dev_path_info(&stack, &info);
-+
-+	if (!info.indev || !nft_flowtable_find_dev(info.indev, ft))
-+		return;
-+
-+	route->tuple[!dir].in.ifindex = info.indev->ifindex;
-+}
-+
- static int nft_flow_route(const struct nft_pktinfo *pkt,
- 			  const struct nf_conn *ct,
- 			  struct nf_flow_route *route,
--			  enum ip_conntrack_dir dir)
-+			  enum ip_conntrack_dir dir,
-+			  struct nft_flowtable *ft)
- {
- 	struct dst_entry *this_dst = skb_dst(pkt->skb);
- 	struct dst_entry *other_dst = NULL;
-@@ -63,6 +153,12 @@ static int nft_flow_route(const struct n
- 	nft_default_forward_path(route, this_dst, dir);
- 	nft_default_forward_path(route, other_dst, !dir);
- 
-+	if (route->tuple[dir].xmit_type	== FLOW_OFFLOAD_XMIT_NEIGH &&
-+	    route->tuple[!dir].xmit_type == FLOW_OFFLOAD_XMIT_NEIGH) {
-+		nft_dev_forward_path(route, ct, dir, ft);
-+		nft_dev_forward_path(route, ct, !dir, ft);
-+	}
-+
- 	return 0;
- }
- 
-@@ -90,8 +186,8 @@ static void nft_flow_offload_eval(const
- 	struct nft_flow_offload *priv = nft_expr_priv(expr);
- 	struct nf_flowtable *flowtable = &priv->flowtable->data;
- 	struct tcphdr _tcph, *tcph = NULL;
-+	struct nf_flow_route route = {};
- 	enum ip_conntrack_info ctinfo;
--	struct nf_flow_route route;
- 	struct flow_offload *flow;
- 	enum ip_conntrack_dir dir;
- 	struct nf_conn *ct;
-@@ -128,7 +224,7 @@ static void nft_flow_offload_eval(const
- 		goto out;
- 
- 	dir = CTINFO2DIR(ctinfo);
--	if (nft_flow_route(pkt, ct, &route, dir) < 0)
-+	if (nft_flow_route(pkt, ct, &route, dir, priv->flowtable) < 0)
- 		goto err_flow_route;
- 
- 	flow = flow_offload_alloc(ct);
diff --git a/target/linux/generic/backport-5.10/610-v5.13-19-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch b/target/linux/generic/backport-5.10/610-v5.13-19-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch
deleted file mode 100644
index 457e218d9b63..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-19-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch
+++ /dev/null
@@ -1,374 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:40 +0100
-Subject: [PATCH] netfilter: flowtable: use dev_fill_forward_path() to
- obtain egress device
-
-The egress device in the tuple is obtained from route. Use
-dev_fill_forward_path() instead to provide the real egress device for
-this flow whenever this is available.
-
-The new FLOW_OFFLOAD_XMIT_DIRECT type uses dev_queue_xmit() to transmit
-ethernet frames. Cache the source and destination hardware address to
-use dev_queue_xmit() to transfer packets.
-
-The FLOW_OFFLOAD_XMIT_DIRECT replaces FLOW_OFFLOAD_XMIT_NEIGH if
-dev_fill_forward_path() finds a direct transmit path.
-
-In case of topology updates, if peer is moved to different bridge port,
-the connection will time out, reconnect will result in a new entry with
-the correct path. Snooping fdb updates would allow for cleaning up stale
-flowtable entries.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -92,6 +92,7 @@ enum flow_offload_tuple_dir {
- enum flow_offload_xmit_type {
- 	FLOW_OFFLOAD_XMIT_NEIGH		= 0,
- 	FLOW_OFFLOAD_XMIT_XFRM,
-+	FLOW_OFFLOAD_XMIT_DIRECT,
- };
- 
- struct flow_offload_tuple {
-@@ -120,8 +121,14 @@ struct flow_offload_tuple {
- 					xmit_type:2;
- 
- 	u16				mtu;
--
--	struct dst_entry		*dst_cache;
-+	union {
-+		struct dst_entry	*dst_cache;
-+		struct {
-+			u32		ifidx;
-+			u8		h_source[ETH_ALEN];
-+			u8		h_dest[ETH_ALEN];
-+		} out;
-+	};
- };
- 
- struct flow_offload_tuple_rhash {
-@@ -167,6 +174,11 @@ struct nf_flow_route {
- 		struct {
- 			u32			ifindex;
- 		} in;
-+		struct {
-+			u32			ifindex;
-+			u8			h_source[ETH_ALEN];
-+			u8			h_dest[ETH_ALEN];
-+		} out;
- 		enum flow_offload_xmit_type	xmit_type;
- 	} tuple[FLOW_OFFLOAD_DIR_MAX];
- };
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -81,9 +81,6 @@ static int flow_offload_fill_route(struc
- 	struct flow_offload_tuple *flow_tuple = &flow->tuplehash[dir].tuple;
- 	struct dst_entry *dst = route->tuple[dir].dst;
- 
--	if (!dst_hold_safe(route->tuple[dir].dst))
--		return -1;
--
- 	switch (flow_tuple->l3proto) {
- 	case NFPROTO_IPV4:
- 		flow_tuple->mtu = ip_dst_mtu_maybe_forward(dst, true);
-@@ -94,12 +91,36 @@ static int flow_offload_fill_route(struc
- 	}
- 
- 	flow_tuple->iifidx = route->tuple[dir].in.ifindex;
-+
-+	switch (route->tuple[dir].xmit_type) {
-+	case FLOW_OFFLOAD_XMIT_DIRECT:
-+		memcpy(flow_tuple->out.h_dest, route->tuple[dir].out.h_dest,
-+		       ETH_ALEN);
-+		memcpy(flow_tuple->out.h_source, route->tuple[dir].out.h_source,
-+		       ETH_ALEN);
-+		flow_tuple->out.ifidx = route->tuple[dir].out.ifindex;
-+		break;
-+	case FLOW_OFFLOAD_XMIT_XFRM:
-+	case FLOW_OFFLOAD_XMIT_NEIGH:
-+		if (!dst_hold_safe(route->tuple[dir].dst))
-+			return -1;
-+
-+		flow_tuple->dst_cache = dst;
-+		break;
-+	}
- 	flow_tuple->xmit_type = route->tuple[dir].xmit_type;
--	flow_tuple->dst_cache = dst;
- 
- 	return 0;
- }
- 
-+static void nft_flow_dst_release(struct flow_offload *flow,
-+				 enum flow_offload_tuple_dir dir)
-+{
-+	if (flow->tuplehash[dir].tuple.xmit_type == FLOW_OFFLOAD_XMIT_NEIGH ||
-+	    flow->tuplehash[dir].tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)
-+		dst_release(flow->tuplehash[dir].tuple.dst_cache);
-+}
-+
- int flow_offload_route_init(struct flow_offload *flow,
- 			    const struct nf_flow_route *route)
- {
-@@ -118,7 +139,7 @@ int flow_offload_route_init(struct flow_
- 	return 0;
- 
- err_route_reply:
--	dst_release(route->tuple[FLOW_OFFLOAD_DIR_ORIGINAL].dst);
-+	nft_flow_dst_release(flow, FLOW_OFFLOAD_DIR_ORIGINAL);
- 
- 	return err;
- }
-@@ -169,8 +190,8 @@ static void flow_offload_fixup_ct(struct
- 
- static void flow_offload_route_release(struct flow_offload *flow)
- {
--	dst_release(flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.dst_cache);
--	dst_release(flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].tuple.dst_cache);
-+	nft_flow_dst_release(flow, FLOW_OFFLOAD_DIR_ORIGINAL);
-+	nft_flow_dst_release(flow, FLOW_OFFLOAD_DIR_REPLY);
- }
- 
- void flow_offload_free(struct flow_offload *flow)
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -207,6 +207,24 @@ static unsigned int nf_flow_xmit_xfrm(st
- 	return NF_STOLEN;
- }
- 
-+static unsigned int nf_flow_queue_xmit(struct net *net, struct sk_buff *skb,
-+				       const struct flow_offload_tuple_rhash *tuplehash,
-+				       unsigned short type)
-+{
-+	struct net_device *outdev;
-+
-+	outdev = dev_get_by_index_rcu(net, tuplehash->tuple.out.ifidx);
-+	if (!outdev)
-+		return NF_DROP;
-+
-+	skb->dev = outdev;
-+	dev_hard_header(skb, skb->dev, type, tuplehash->tuple.out.h_dest,
-+			tuplehash->tuple.out.h_source, skb->len);
-+	dev_queue_xmit(skb);
-+
-+	return NF_STOLEN;
-+}
-+
- unsigned int
- nf_flow_offload_ip_hook(void *priv, struct sk_buff *skb,
- 			const struct nf_hook_state *state)
-@@ -222,6 +240,7 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	struct iphdr *iph;
- 	__be32 nexthop;
- 	u32 hdrsize;
-+	int ret;
- 
- 	if (skb->protocol != htons(ETH_P_IP))
- 		return NF_ACCEPT;
-@@ -244,9 +263,13 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	if (nf_flow_state_check(flow, iph->protocol, skb, thoff))
- 		return NF_ACCEPT;
- 
--	if (!dst_check(&rt->dst, 0)) {
--		flow_offload_teardown(flow);
--		return NF_ACCEPT;
-+	if (tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_NEIGH ||
-+	    tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM) {
-+		rt = (struct rtable *)tuplehash->tuple.dst_cache;
-+		if (!dst_check(&rt->dst, 0)) {
-+			flow_offload_teardown(flow);
-+			return NF_ACCEPT;
-+		}
- 	}
- 
- 	if (skb_try_make_writable(skb, thoff + hdrsize))
-@@ -263,8 +286,6 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	if (flow_table->flags & NF_FLOWTABLE_COUNTER)
- 		nf_ct_acct_update(flow->ct, tuplehash->tuple.dir, skb->len);
- 
--	rt = (struct rtable *)tuplehash->tuple.dst_cache;
--
- 	if (unlikely(tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)) {
- 		memset(skb->cb, 0, sizeof(struct inet_skb_parm));
- 		IPCB(skb)->iif = skb->dev->ifindex;
-@@ -272,13 +293,23 @@ nf_flow_offload_ip_hook(void *priv, stru
- 		return nf_flow_xmit_xfrm(skb, state, &rt->dst);
- 	}
- 
--	outdev = rt->dst.dev;
--	skb->dev = outdev;
--	nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr);
--	skb_dst_set_noref(skb, &rt->dst);
--	neigh_xmit(NEIGH_ARP_TABLE, outdev, &nexthop, skb);
-+	switch (tuplehash->tuple.xmit_type) {
-+	case FLOW_OFFLOAD_XMIT_NEIGH:
-+		outdev = rt->dst.dev;
-+		skb->dev = outdev;
-+		nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr);
-+		skb_dst_set_noref(skb, &rt->dst);
-+		neigh_xmit(NEIGH_ARP_TABLE, outdev, &nexthop, skb);
-+		ret = NF_STOLEN;
-+		break;
-+	case FLOW_OFFLOAD_XMIT_DIRECT:
-+		ret = nf_flow_queue_xmit(state->net, skb, tuplehash, ETH_P_IP);
-+		if (ret == NF_DROP)
-+			flow_offload_teardown(flow);
-+		break;
-+	}
- 
--	return NF_STOLEN;
-+	return ret;
- }
- EXPORT_SYMBOL_GPL(nf_flow_offload_ip_hook);
- 
-@@ -444,6 +475,7 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 	struct ipv6hdr *ip6h;
- 	struct rt6_info *rt;
- 	u32 hdrsize;
-+	int ret;
- 
- 	if (skb->protocol != htons(ETH_P_IPV6))
- 		return NF_ACCEPT;
-@@ -465,9 +497,13 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 				sizeof(*ip6h)))
- 		return NF_ACCEPT;
- 
--	if (!dst_check(&rt->dst, 0)) {
--		flow_offload_teardown(flow);
--		return NF_ACCEPT;
-+	if (tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_NEIGH ||
-+	    tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM) {
-+		rt = (struct rt6_info *)tuplehash->tuple.dst_cache;
-+		if (!dst_check(&rt->dst, 0)) {
-+			flow_offload_teardown(flow);
-+			return NF_ACCEPT;
-+		}
- 	}
- 
- 	if (skb_try_make_writable(skb, sizeof(*ip6h) + hdrsize))
-@@ -484,8 +520,6 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 	if (flow_table->flags & NF_FLOWTABLE_COUNTER)
- 		nf_ct_acct_update(flow->ct, tuplehash->tuple.dir, skb->len);
- 
--	rt = (struct rt6_info *)tuplehash->tuple.dst_cache;
--
- 	if (unlikely(tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)) {
- 		memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
- 		IP6CB(skb)->iif = skb->dev->ifindex;
-@@ -493,12 +527,22 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 		return nf_flow_xmit_xfrm(skb, state, &rt->dst);
- 	}
- 
--	outdev = rt->dst.dev;
--	skb->dev = outdev;
--	nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6);
--	skb_dst_set_noref(skb, &rt->dst);
--	neigh_xmit(NEIGH_ND_TABLE, outdev, nexthop, skb);
-+	switch (tuplehash->tuple.xmit_type) {
-+	case FLOW_OFFLOAD_XMIT_NEIGH:
-+		outdev = rt->dst.dev;
-+		skb->dev = outdev;
-+		nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6);
-+		skb_dst_set_noref(skb, &rt->dst);
-+		neigh_xmit(NEIGH_ND_TABLE, outdev, nexthop, skb);
-+		ret = NF_STOLEN;
-+		break;
-+	case FLOW_OFFLOAD_XMIT_DIRECT:
-+		ret = nf_flow_queue_xmit(state->net, skb, tuplehash, ETH_P_IPV6);
-+		if (ret == NF_DROP)
-+			flow_offload_teardown(flow);
-+		break;
-+	}
- 
--	return NF_STOLEN;
-+	return ret;
- }
- EXPORT_SYMBOL_GPL(nf_flow_offload_ipv6_hook);
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -39,12 +39,11 @@ static void nft_default_forward_path(str
- static int nft_dev_fill_forward_path(const struct nf_flow_route *route,
- 				     const struct dst_entry *dst_cache,
- 				     const struct nf_conn *ct,
--				     enum ip_conntrack_dir dir,
-+				     enum ip_conntrack_dir dir, u8 *ha,
- 				     struct net_device_path_stack *stack)
- {
- 	const void *daddr = &ct->tuplehash[!dir].tuple.src.u3;
- 	struct net_device *dev = dst_cache->dev;
--	unsigned char ha[ETH_ALEN];
- 	struct neighbour *n;
- 	u8 nud_state;
- 
-@@ -66,27 +65,43 @@ static int nft_dev_fill_forward_path(con
- 
- struct nft_forward_info {
- 	const struct net_device *indev;
-+	const struct net_device *outdev;
-+	u8 h_source[ETH_ALEN];
-+	u8 h_dest[ETH_ALEN];
-+	enum flow_offload_xmit_type xmit_type;
- };
- 
- static void nft_dev_path_info(const struct net_device_path_stack *stack,
--			      struct nft_forward_info *info)
-+			      struct nft_forward_info *info,
-+			      unsigned char *ha)
- {
- 	const struct net_device_path *path;
- 	int i;
- 
-+	memcpy(info->h_dest, ha, ETH_ALEN);
-+
- 	for (i = 0; i < stack->num_paths; i++) {
- 		path = &stack->path[i];
- 		switch (path->type) {
- 		case DEV_PATH_ETHERNET:
- 			info->indev = path->dev;
-+			if (is_zero_ether_addr(info->h_source))
-+				memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN);
- 			break;
--		case DEV_PATH_VLAN:
- 		case DEV_PATH_BRIDGE:
-+			if (is_zero_ether_addr(info->h_source))
-+				memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN);
-+
-+			info->xmit_type = FLOW_OFFLOAD_XMIT_DIRECT;
-+			break;
-+		case DEV_PATH_VLAN:
- 		default:
- 			info->indev = NULL;
- 			break;
- 		}
- 	}
-+	if (!info->outdev)
-+		info->outdev = info->indev;
- }
- 
- static bool nft_flowtable_find_dev(const struct net_device *dev,
-@@ -114,14 +129,22 @@ static void nft_dev_forward_path(struct
- 	const struct dst_entry *dst = route->tuple[dir].dst;
- 	struct net_device_path_stack stack;
- 	struct nft_forward_info info = {};
-+	unsigned char ha[ETH_ALEN];
- 
--	if (nft_dev_fill_forward_path(route, dst, ct, dir, &stack) >= 0)
--		nft_dev_path_info(&stack, &info);
-+	if (nft_dev_fill_forward_path(route, dst, ct, dir, ha, &stack) >= 0)
-+		nft_dev_path_info(&stack, &info, ha);
- 
- 	if (!info.indev || !nft_flowtable_find_dev(info.indev, ft))
- 		return;
- 
- 	route->tuple[!dir].in.ifindex = info.indev->ifindex;
-+
-+	if (info.xmit_type == FLOW_OFFLOAD_XMIT_DIRECT) {
-+		memcpy(route->tuple[dir].out.h_source, info.h_source, ETH_ALEN);
-+		memcpy(route->tuple[dir].out.h_dest, info.h_dest, ETH_ALEN);
-+		route->tuple[dir].out.ifindex = info.outdev->ifindex;
-+		route->tuple[dir].xmit_type = info.xmit_type;
-+	}
- }
- 
- static int nft_flow_route(const struct nft_pktinfo *pkt,
diff --git a/target/linux/generic/backport-5.10/610-v5.13-20-netfilter-flowtable-add-vlan-support.patch b/target/linux/generic/backport-5.10/610-v5.13-20-netfilter-flowtable-add-vlan-support.patch
deleted file mode 100644
index 86a11298809a..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-20-netfilter-flowtable-add-vlan-support.patch
+++ /dev/null
@@ -1,410 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:41 +0100
-Subject: [PATCH] netfilter: flowtable: add vlan support
-
-Add the vlan id and protocol to the flow tuple to uniquely identify
-flows from the receive path. For the transmit path, dev_hard_header() on
-the vlan device push the headers. This patch includes support for two
-vlan headers (QinQ) from the ingress path.
-
-Add a generic encap field to the flowtable entry which stores the
-protocol and the tag id. This allows to reuse these fields in the PPPoE
-support coming in a later patch.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -95,6 +95,8 @@ enum flow_offload_xmit_type {
- 	FLOW_OFFLOAD_XMIT_DIRECT,
- };
- 
-+#define NF_FLOW_TABLE_ENCAP_MAX		2
-+
- struct flow_offload_tuple {
- 	union {
- 		struct in_addr		src_v4;
-@@ -113,13 +115,17 @@ struct flow_offload_tuple {
- 
- 	u8				l3proto;
- 	u8				l4proto;
-+	struct {
-+		u16			id;
-+		__be16			proto;
-+	} encap[NF_FLOW_TABLE_ENCAP_MAX];
- 
- 	/* All members above are keys for lookups, see flow_offload_hash(). */
- 	struct { }			__hash;
- 
--	u8				dir:6,
--					xmit_type:2;
--
-+	u8				dir:4,
-+					xmit_type:2,
-+					encap_num:2;
- 	u16				mtu;
- 	union {
- 		struct dst_entry	*dst_cache;
-@@ -173,6 +179,11 @@ struct nf_flow_route {
- 		struct dst_entry		*dst;
- 		struct {
- 			u32			ifindex;
-+			struct {
-+				u16		id;
-+				__be16		proto;
-+			} encap[NF_FLOW_TABLE_ENCAP_MAX];
-+			u8			num_encaps;
- 		} in;
- 		struct {
- 			u32			ifindex;
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -80,6 +80,7 @@ static int flow_offload_fill_route(struc
- {
- 	struct flow_offload_tuple *flow_tuple = &flow->tuplehash[dir].tuple;
- 	struct dst_entry *dst = route->tuple[dir].dst;
-+	int i, j = 0;
- 
- 	switch (flow_tuple->l3proto) {
- 	case NFPROTO_IPV4:
-@@ -91,6 +92,12 @@ static int flow_offload_fill_route(struc
- 	}
- 
- 	flow_tuple->iifidx = route->tuple[dir].in.ifindex;
-+	for (i = route->tuple[dir].in.num_encaps - 1; i >= 0; i--) {
-+		flow_tuple->encap[j].id = route->tuple[dir].in.encap[i].id;
-+		flow_tuple->encap[j].proto = route->tuple[dir].in.encap[i].proto;
-+		j++;
-+	}
-+	flow_tuple->encap_num = route->tuple[dir].in.num_encaps;
- 
- 	switch (route->tuple[dir].xmit_type) {
- 	case FLOW_OFFLOAD_XMIT_DIRECT:
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -136,23 +136,44 @@ static bool ip_has_options(unsigned int
- 	return thoff != sizeof(struct iphdr);
- }
- 
-+static void nf_flow_tuple_encap(struct sk_buff *skb,
-+				struct flow_offload_tuple *tuple)
-+{
-+	int i = 0;
-+
-+	if (skb_vlan_tag_present(skb)) {
-+		tuple->encap[i].id = skb_vlan_tag_get(skb);
-+		tuple->encap[i].proto = skb->vlan_proto;
-+		i++;
-+	}
-+	if (skb->protocol == htons(ETH_P_8021Q)) {
-+		struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb);
-+
-+		tuple->encap[i].id = ntohs(veth->h_vlan_TCI);
-+		tuple->encap[i].proto = skb->protocol;
-+	}
-+}
-+
- static int nf_flow_tuple_ip(struct sk_buff *skb, const struct net_device *dev,
--			    struct flow_offload_tuple *tuple, u32 *hdrsize)
-+			    struct flow_offload_tuple *tuple, u32 *hdrsize,
-+			    u32 offset)
- {
- 	struct flow_ports *ports;
- 	unsigned int thoff;
- 	struct iphdr *iph;
- 
--	if (!pskb_may_pull(skb, sizeof(*iph)))
-+	if (!pskb_may_pull(skb, sizeof(*iph) + offset))
- 		return -1;
- 
--	iph = ip_hdr(skb);
--	thoff = iph->ihl * 4;
-+	iph = (struct iphdr *)(skb_network_header(skb) + offset);
-+	thoff = (iph->ihl * 4);
- 
- 	if (ip_is_fragment(iph) ||
- 	    unlikely(ip_has_options(thoff)))
- 		return -1;
- 
-+	thoff += offset;
-+
- 	switch (iph->protocol) {
- 	case IPPROTO_TCP:
- 		*hdrsize = sizeof(struct tcphdr);
-@@ -167,11 +188,10 @@ static int nf_flow_tuple_ip(struct sk_bu
- 	if (iph->ttl <= 1)
- 		return -1;
- 
--	thoff = iph->ihl * 4;
- 	if (!pskb_may_pull(skb, thoff + *hdrsize))
- 		return -1;
- 
--	iph = ip_hdr(skb);
-+	iph = (struct iphdr *)(skb_network_header(skb) + offset);
- 	ports = (struct flow_ports *)(skb_network_header(skb) + thoff);
- 
- 	tuple->src_v4.s_addr	= iph->saddr;
-@@ -181,6 +201,7 @@ static int nf_flow_tuple_ip(struct sk_bu
- 	tuple->l3proto		= AF_INET;
- 	tuple->l4proto		= iph->protocol;
- 	tuple->iifidx		= dev->ifindex;
-+	nf_flow_tuple_encap(skb, tuple);
- 
- 	return 0;
- }
-@@ -207,6 +228,43 @@ static unsigned int nf_flow_xmit_xfrm(st
- 	return NF_STOLEN;
- }
- 
-+static bool nf_flow_skb_encap_protocol(const struct sk_buff *skb, __be16 proto,
-+				       u32 *offset)
-+{
-+	if (skb->protocol == htons(ETH_P_8021Q)) {
-+		struct vlan_ethhdr *veth;
-+
-+		veth = (struct vlan_ethhdr *)skb_mac_header(skb);
-+		if (veth->h_vlan_encapsulated_proto == proto) {
-+			*offset += VLAN_HLEN;
-+			return true;
-+		}
-+	}
-+
-+	return false;
-+}
-+
-+static void nf_flow_encap_pop(struct sk_buff *skb,
-+			      struct flow_offload_tuple_rhash *tuplehash)
-+{
-+	struct vlan_hdr *vlan_hdr;
-+	int i;
-+
-+	for (i = 0; i < tuplehash->tuple.encap_num; i++) {
-+		if (skb_vlan_tag_present(skb)) {
-+			__vlan_hwaccel_clear_tag(skb);
-+			continue;
-+		}
-+		if (skb->protocol == htons(ETH_P_8021Q)) {
-+			vlan_hdr = (struct vlan_hdr *)skb->data;
-+			__skb_pull(skb, VLAN_HLEN);
-+			vlan_set_encap_proto(skb, vlan_hdr);
-+			skb_reset_network_header(skb);
-+			break;
-+		}
-+	}
-+}
-+
- static unsigned int nf_flow_queue_xmit(struct net *net, struct sk_buff *skb,
- 				       const struct flow_offload_tuple_rhash *tuplehash,
- 				       unsigned short type)
-@@ -235,17 +293,18 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	enum flow_offload_tuple_dir dir;
- 	struct flow_offload *flow;
- 	struct net_device *outdev;
-+	u32 hdrsize, offset = 0;
-+	unsigned int thoff, mtu;
- 	struct rtable *rt;
--	unsigned int thoff;
- 	struct iphdr *iph;
- 	__be32 nexthop;
--	u32 hdrsize;
- 	int ret;
- 
--	if (skb->protocol != htons(ETH_P_IP))
-+	if (skb->protocol != htons(ETH_P_IP) &&
-+	    !nf_flow_skb_encap_protocol(skb, htons(ETH_P_IP), &offset))
- 		return NF_ACCEPT;
- 
--	if (nf_flow_tuple_ip(skb, state->in, &tuple, &hdrsize) < 0)
-+	if (nf_flow_tuple_ip(skb, state->in, &tuple, &hdrsize, offset) < 0)
- 		return NF_ACCEPT;
- 
- 	tuplehash = flow_offload_lookup(flow_table, &tuple);
-@@ -255,11 +314,12 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	dir = tuplehash->tuple.dir;
- 	flow = container_of(tuplehash, struct flow_offload, tuplehash[dir]);
- 
--	if (unlikely(nf_flow_exceeds_mtu(skb, flow->tuplehash[dir].tuple.mtu)))
-+	mtu = flow->tuplehash[dir].tuple.mtu + offset;
-+	if (unlikely(nf_flow_exceeds_mtu(skb, mtu)))
- 		return NF_ACCEPT;
- 
--	iph = ip_hdr(skb);
--	thoff = iph->ihl * 4;
-+	iph = (struct iphdr *)(skb_network_header(skb) + offset);
-+	thoff = (iph->ihl * 4) + offset;
- 	if (nf_flow_state_check(flow, iph->protocol, skb, thoff))
- 		return NF_ACCEPT;
- 
-@@ -277,6 +337,9 @@ nf_flow_offload_ip_hook(void *priv, stru
- 
- 	flow_offload_refresh(flow_table, flow);
- 
-+	nf_flow_encap_pop(skb, tuplehash);
-+	thoff -= offset;
-+
- 	iph = ip_hdr(skb);
- 	nf_flow_nat_ip(flow, skb, thoff, dir, iph);
- 
-@@ -418,16 +481,18 @@ static void nf_flow_nat_ipv6(const struc
- }
- 
- static int nf_flow_tuple_ipv6(struct sk_buff *skb, const struct net_device *dev,
--			      struct flow_offload_tuple *tuple, u32 *hdrsize)
-+			      struct flow_offload_tuple *tuple, u32 *hdrsize,
-+			      u32 offset)
- {
- 	struct flow_ports *ports;
- 	struct ipv6hdr *ip6h;
- 	unsigned int thoff;
- 
--	if (!pskb_may_pull(skb, sizeof(*ip6h)))
-+	thoff = sizeof(*ip6h) + offset;
-+	if (!pskb_may_pull(skb, thoff))
- 		return -1;
- 
--	ip6h = ipv6_hdr(skb);
-+	ip6h = (struct ipv6hdr *)(skb_network_header(skb) + offset);
- 
- 	switch (ip6h->nexthdr) {
- 	case IPPROTO_TCP:
-@@ -443,11 +508,10 @@ static int nf_flow_tuple_ipv6(struct sk_
- 	if (ip6h->hop_limit <= 1)
- 		return -1;
- 
--	thoff = sizeof(*ip6h);
- 	if (!pskb_may_pull(skb, thoff + *hdrsize))
- 		return -1;
- 
--	ip6h = ipv6_hdr(skb);
-+	ip6h = (struct ipv6hdr *)(skb_network_header(skb) + offset);
- 	ports = (struct flow_ports *)(skb_network_header(skb) + thoff);
- 
- 	tuple->src_v6		= ip6h->saddr;
-@@ -457,6 +521,7 @@ static int nf_flow_tuple_ipv6(struct sk_
- 	tuple->l3proto		= AF_INET6;
- 	tuple->l4proto		= ip6h->nexthdr;
- 	tuple->iifidx		= dev->ifindex;
-+	nf_flow_tuple_encap(skb, tuple);
- 
- 	return 0;
- }
-@@ -472,15 +537,17 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 	const struct in6_addr *nexthop;
- 	struct flow_offload *flow;
- 	struct net_device *outdev;
-+	unsigned int thoff, mtu;
-+	u32 hdrsize, offset = 0;
- 	struct ipv6hdr *ip6h;
- 	struct rt6_info *rt;
--	u32 hdrsize;
- 	int ret;
- 
--	if (skb->protocol != htons(ETH_P_IPV6))
-+	if (skb->protocol != htons(ETH_P_IPV6) &&
-+	    !nf_flow_skb_encap_protocol(skb, htons(ETH_P_IPV6), &offset))
- 		return NF_ACCEPT;
- 
--	if (nf_flow_tuple_ipv6(skb, state->in, &tuple, &hdrsize) < 0)
-+	if (nf_flow_tuple_ipv6(skb, state->in, &tuple, &hdrsize, offset) < 0)
- 		return NF_ACCEPT;
- 
- 	tuplehash = flow_offload_lookup(flow_table, &tuple);
-@@ -490,11 +557,13 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 	dir = tuplehash->tuple.dir;
- 	flow = container_of(tuplehash, struct flow_offload, tuplehash[dir]);
- 
--	if (unlikely(nf_flow_exceeds_mtu(skb, flow->tuplehash[dir].tuple.mtu)))
-+	mtu = flow->tuplehash[dir].tuple.mtu + offset;
-+	if (unlikely(nf_flow_exceeds_mtu(skb, mtu)))
- 		return NF_ACCEPT;
- 
--	if (nf_flow_state_check(flow, ipv6_hdr(skb)->nexthdr, skb,
--				sizeof(*ip6h)))
-+	ip6h = (struct ipv6hdr *)(skb_network_header(skb) + offset);
-+	thoff = sizeof(*ip6h) + offset;
-+	if (nf_flow_state_check(flow, ip6h->nexthdr, skb, thoff))
- 		return NF_ACCEPT;
- 
- 	if (tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_NEIGH ||
-@@ -506,11 +575,13 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 		}
- 	}
- 
--	if (skb_try_make_writable(skb, sizeof(*ip6h) + hdrsize))
-+	if (skb_try_make_writable(skb, thoff + hdrsize))
- 		return NF_DROP;
- 
- 	flow_offload_refresh(flow_table, flow);
- 
-+	nf_flow_encap_pop(skb, tuplehash);
-+
- 	ip6h = ipv6_hdr(skb);
- 	nf_flow_nat_ipv6(flow, skb, dir, ip6h);
- 
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -66,6 +66,11 @@ static int nft_dev_fill_forward_path(con
- struct nft_forward_info {
- 	const struct net_device *indev;
- 	const struct net_device *outdev;
-+	struct id {
-+		__u16	id;
-+		__be16	proto;
-+	} encap[NF_FLOW_TABLE_ENCAP_MAX];
-+	u8 num_encaps;
- 	u8 h_source[ETH_ALEN];
- 	u8 h_dest[ETH_ALEN];
- 	enum flow_offload_xmit_type xmit_type;
-@@ -84,9 +89,23 @@ static void nft_dev_path_info(const stru
- 		path = &stack->path[i];
- 		switch (path->type) {
- 		case DEV_PATH_ETHERNET:
-+		case DEV_PATH_VLAN:
- 			info->indev = path->dev;
- 			if (is_zero_ether_addr(info->h_source))
- 				memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN);
-+
-+			if (path->type == DEV_PATH_ETHERNET)
-+				break;
-+
-+			/* DEV_PATH_VLAN */
-+			if (info->num_encaps >= NF_FLOW_TABLE_ENCAP_MAX) {
-+				info->indev = NULL;
-+				break;
-+			}
-+			info->outdev = path->dev;
-+			info->encap[info->num_encaps].id = path->encap.id;
-+			info->encap[info->num_encaps].proto = path->encap.proto;
-+			info->num_encaps++;
- 			break;
- 		case DEV_PATH_BRIDGE:
- 			if (is_zero_ether_addr(info->h_source))
-@@ -94,7 +113,6 @@ static void nft_dev_path_info(const stru
- 
- 			info->xmit_type = FLOW_OFFLOAD_XMIT_DIRECT;
- 			break;
--		case DEV_PATH_VLAN:
- 		default:
- 			info->indev = NULL;
- 			break;
-@@ -130,6 +148,7 @@ static void nft_dev_forward_path(struct
- 	struct net_device_path_stack stack;
- 	struct nft_forward_info info = {};
- 	unsigned char ha[ETH_ALEN];
-+	int i;
- 
- 	if (nft_dev_fill_forward_path(route, dst, ct, dir, ha, &stack) >= 0)
- 		nft_dev_path_info(&stack, &info, ha);
-@@ -138,6 +157,11 @@ static void nft_dev_forward_path(struct
- 		return;
- 
- 	route->tuple[!dir].in.ifindex = info.indev->ifindex;
-+	for (i = 0; i < info.num_encaps; i++) {
-+		route->tuple[!dir].in.encap[i].id = info.encap[i].id;
-+		route->tuple[!dir].in.encap[i].proto = info.encap[i].proto;
-+	}
-+	route->tuple[!dir].in.num_encaps = info.num_encaps;
- 
- 	if (info.xmit_type == FLOW_OFFLOAD_XMIT_DIRECT) {
- 		memcpy(route->tuple[dir].out.h_source, info.h_source, ETH_ALEN);
diff --git a/target/linux/generic/backport-5.10/610-v5.13-21-netfilter-flowtable-add-bridge-vlan-filtering-suppor.patch b/target/linux/generic/backport-5.10/610-v5.13-21-netfilter-flowtable-add-bridge-vlan-filtering-suppor.patch
deleted file mode 100644
index cb3ef99029c7..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-21-netfilter-flowtable-add-bridge-vlan-filtering-suppor.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:42 +0100
-Subject: [PATCH] netfilter: flowtable: add bridge vlan filtering support
-
-Add the vlan tag based when PVID is set on.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -111,6 +111,18 @@ static void nft_dev_path_info(const stru
- 			if (is_zero_ether_addr(info->h_source))
- 				memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN);
- 
-+			switch (path->bridge.vlan_mode) {
-+			case DEV_PATH_BR_VLAN_TAG:
-+				info->encap[info->num_encaps].id = path->bridge.vlan_id;
-+				info->encap[info->num_encaps].proto = path->bridge.vlan_proto;
-+				info->num_encaps++;
-+				break;
-+			case DEV_PATH_BR_VLAN_UNTAG:
-+				info->num_encaps--;
-+				break;
-+			case DEV_PATH_BR_VLAN_KEEP:
-+				break;
-+			}
- 			info->xmit_type = FLOW_OFFLOAD_XMIT_DIRECT;
- 			break;
- 		default:
diff --git a/target/linux/generic/backport-5.10/610-v5.13-22-netfilter-flowtable-add-pppoe-support.patch b/target/linux/generic/backport-5.10/610-v5.13-22-netfilter-flowtable-add-pppoe-support.patch
deleted file mode 100644
index d5789cbad2e9..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-22-netfilter-flowtable-add-pppoe-support.patch
+++ /dev/null
@@ -1,145 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:43 +0100
-Subject: [PATCH] netfilter: flowtable: add pppoe support
-
-Add the PPPoE protocol and session id to the flow tuple using the encap
-fields to uniquely identify flows from the receive path. For the
-transmit path, dev_hard_header() on the vlan device push the headers.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -7,6 +7,9 @@
- #include <linux/ip.h>
- #include <linux/ipv6.h>
- #include <linux/netdevice.h>
-+#include <linux/if_ether.h>
-+#include <linux/if_pppox.h>
-+#include <linux/ppp_defs.h>
- #include <net/ip.h>
- #include <net/ipv6.h>
- #include <net/ip6_route.h>
-@@ -139,6 +142,8 @@ static bool ip_has_options(unsigned int
- static void nf_flow_tuple_encap(struct sk_buff *skb,
- 				struct flow_offload_tuple *tuple)
- {
-+	struct vlan_ethhdr *veth;
-+	struct pppoe_hdr *phdr;
- 	int i = 0;
- 
- 	if (skb_vlan_tag_present(skb)) {
-@@ -146,11 +151,17 @@ static void nf_flow_tuple_encap(struct s
- 		tuple->encap[i].proto = skb->vlan_proto;
- 		i++;
- 	}
--	if (skb->protocol == htons(ETH_P_8021Q)) {
--		struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb);
--
-+	switch (skb->protocol) {
-+	case htons(ETH_P_8021Q):
-+		veth = (struct vlan_ethhdr *)skb_mac_header(skb);
- 		tuple->encap[i].id = ntohs(veth->h_vlan_TCI);
- 		tuple->encap[i].proto = skb->protocol;
-+		break;
-+	case htons(ETH_P_PPP_SES):
-+		phdr = (struct pppoe_hdr *)skb_mac_header(skb);
-+		tuple->encap[i].id = ntohs(phdr->sid);
-+		tuple->encap[i].proto = skb->protocol;
-+		break;
- 	}
- }
- 
-@@ -228,17 +239,41 @@ static unsigned int nf_flow_xmit_xfrm(st
- 	return NF_STOLEN;
- }
- 
-+static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb)
-+{
-+	__be16 proto;
-+
-+	proto = *((__be16 *)(skb_mac_header(skb) + ETH_HLEN +
-+			     sizeof(struct pppoe_hdr)));
-+	switch (proto) {
-+	case htons(PPP_IP):
-+		return htons(ETH_P_IP);
-+	case htons(PPP_IPV6):
-+		return htons(ETH_P_IPV6);
-+	}
-+
-+	return 0;
-+}
-+
- static bool nf_flow_skb_encap_protocol(const struct sk_buff *skb, __be16 proto,
- 				       u32 *offset)
- {
--	if (skb->protocol == htons(ETH_P_8021Q)) {
--		struct vlan_ethhdr *veth;
-+	struct vlan_ethhdr *veth;
- 
-+	switch (skb->protocol) {
-+	case htons(ETH_P_8021Q):
- 		veth = (struct vlan_ethhdr *)skb_mac_header(skb);
- 		if (veth->h_vlan_encapsulated_proto == proto) {
- 			*offset += VLAN_HLEN;
- 			return true;
- 		}
-+		break;
-+	case htons(ETH_P_PPP_SES):
-+		if (nf_flow_pppoe_proto(skb) == proto) {
-+			*offset += PPPOE_SES_HLEN;
-+			return true;
-+		}
-+		break;
- 	}
- 
- 	return false;
-@@ -255,12 +290,18 @@ static void nf_flow_encap_pop(struct sk_
- 			__vlan_hwaccel_clear_tag(skb);
- 			continue;
- 		}
--		if (skb->protocol == htons(ETH_P_8021Q)) {
-+		switch (skb->protocol) {
-+		case htons(ETH_P_8021Q):
- 			vlan_hdr = (struct vlan_hdr *)skb->data;
- 			__skb_pull(skb, VLAN_HLEN);
- 			vlan_set_encap_proto(skb, vlan_hdr);
- 			skb_reset_network_header(skb);
- 			break;
-+		case htons(ETH_P_PPP_SES):
-+			skb->protocol = nf_flow_pppoe_proto(skb);
-+			skb_pull(skb, PPPOE_SES_HLEN);
-+			skb_reset_network_header(skb);
-+			break;
- 		}
- 	}
- }
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -90,6 +90,7 @@ static void nft_dev_path_info(const stru
- 		switch (path->type) {
- 		case DEV_PATH_ETHERNET:
- 		case DEV_PATH_VLAN:
-+		case DEV_PATH_PPPOE:
- 			info->indev = path->dev;
- 			if (is_zero_ether_addr(info->h_source))
- 				memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN);
-@@ -97,7 +98,7 @@ static void nft_dev_path_info(const stru
- 			if (path->type == DEV_PATH_ETHERNET)
- 				break;
- 
--			/* DEV_PATH_VLAN */
-+			/* DEV_PATH_VLAN and DEV_PATH_PPPOE */
- 			if (info->num_encaps >= NF_FLOW_TABLE_ENCAP_MAX) {
- 				info->indev = NULL;
- 				break;
-@@ -106,6 +107,8 @@ static void nft_dev_path_info(const stru
- 			info->encap[info->num_encaps].id = path->encap.id;
- 			info->encap[info->num_encaps].proto = path->encap.proto;
- 			info->num_encaps++;
-+			if (path->type == DEV_PATH_PPPOE)
-+				memcpy(info->h_dest, path->encap.h_dest, ETH_ALEN);
- 			break;
- 		case DEV_PATH_BRIDGE:
- 			if (is_zero_ether_addr(info->h_source))
diff --git a/target/linux/generic/backport-5.10/610-v5.13-23-netfilter-flowtable-add-dsa-support.patch b/target/linux/generic/backport-5.10/610-v5.13-23-netfilter-flowtable-add-dsa-support.patch
deleted file mode 100644
index b4931830d359..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-23-netfilter-flowtable-add-dsa-support.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:44 +0100
-Subject: [PATCH] netfilter: flowtable: add dsa support
-
-Replace the master ethernet device by the dsa slave port. Packets coming
-in from the software ingress path use the dsa slave port as input
-device.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -89,6 +89,7 @@ static void nft_dev_path_info(const stru
- 		path = &stack->path[i];
- 		switch (path->type) {
- 		case DEV_PATH_ETHERNET:
-+		case DEV_PATH_DSA:
- 		case DEV_PATH_VLAN:
- 		case DEV_PATH_PPPOE:
- 			info->indev = path->dev;
-@@ -97,6 +98,10 @@ static void nft_dev_path_info(const stru
- 
- 			if (path->type == DEV_PATH_ETHERNET)
- 				break;
-+			if (path->type == DEV_PATH_DSA) {
-+				i = stack->num_paths;
-+				break;
-+			}
- 
- 			/* DEV_PATH_VLAN and DEV_PATH_PPPOE */
- 			if (info->num_encaps >= NF_FLOW_TABLE_ENCAP_MAX) {
diff --git a/target/linux/generic/backport-5.10/610-v5.13-24-selftests-netfilter-flowtable-bridge-and-vlan-suppor.patch b/target/linux/generic/backport-5.10/610-v5.13-24-selftests-netfilter-flowtable-bridge-and-vlan-suppor.patch
deleted file mode 100644
index 3f332c70d367..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-24-selftests-netfilter-flowtable-bridge-and-vlan-suppor.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:45 +0100
-Subject: [PATCH] selftests: netfilter: flowtable bridge and vlan support
-
-This patch adds two new tests to cover bridge and vlan support:
-
-- Add a bridge device to the Router1 (nsr1) container and attach the
-  veth0 device to the bridge. Set the IP address to the bridge device
-  to exercise the bridge forwarding path.
-
-- Add vlan encapsulation between to the bridge device in the Router1 and
-  one of the sender containers (ns1).
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/tools/testing/selftests/netfilter/nft_flowtable.sh
-+++ b/tools/testing/selftests/netfilter/nft_flowtable.sh
-@@ -370,6 +370,88 @@ else
- 	ip netns exec nsr1 nft list ruleset
- fi
- 
-+# Another test:
-+# Add bridge interface br0 to Router1, with NAT enabled.
-+ip -net nsr1 link add name br0 type bridge
-+ip -net nsr1 addr flush dev veth0
-+ip -net nsr1 link set up dev veth0
-+ip -net nsr1 link set veth0 master br0
-+ip -net nsr1 addr add 10.0.1.1/24 dev br0
-+ip -net nsr1 addr add dead:1::1/64 dev br0
-+ip -net nsr1 link set up dev br0
-+
-+ip netns exec nsr1 sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null
-+
-+# br0 with NAT enabled.
-+ip netns exec nsr1 nft -f - <<EOF
-+flush table ip nat
-+table ip nat {
-+   chain prerouting {
-+      type nat hook prerouting priority 0; policy accept;
-+      meta iif "br0" ip daddr 10.6.6.6 tcp dport 1666 counter dnat ip to 10.0.2.99:12345
-+   }
-+
-+   chain postrouting {
-+      type nat hook postrouting priority 0; policy accept;
-+      meta oifname "veth1" counter masquerade
-+   }
-+}
-+EOF
-+
-+if test_tcp_forwarding_nat ns1 ns2; then
-+	echo "PASS: flow offloaded for ns1/ns2 with bridge NAT"
-+else
-+	echo "FAIL: flow offload for ns1/ns2 with bridge NAT" 1>&2
-+	ip netns exec nsr1 nft list ruleset
-+	ret=1
-+fi
-+
-+# Another test:
-+# Add bridge interface br0 to Router1, with NAT and VLAN.
-+ip -net nsr1 link set veth0 nomaster
-+ip -net nsr1 link set down dev veth0
-+ip -net nsr1 link add link veth0 name veth0.10 type vlan id 10
-+ip -net nsr1 link set up dev veth0
-+ip -net nsr1 link set up dev veth0.10
-+ip -net nsr1 link set veth0.10 master br0
-+
-+ip -net ns1 addr flush dev eth0
-+ip -net ns1 link add link eth0 name eth0.10 type vlan id 10
-+ip -net ns1 link set eth0 up
-+ip -net ns1 link set eth0.10 up
-+ip -net ns1 addr add 10.0.1.99/24 dev eth0.10
-+ip -net ns1 route add default via 10.0.1.1
-+ip -net ns1 addr add dead:1::99/64 dev eth0.10
-+
-+if test_tcp_forwarding_nat ns1 ns2; then
-+	echo "PASS: flow offloaded for ns1/ns2 with bridge NAT and VLAN"
-+else
-+	echo "FAIL: flow offload for ns1/ns2 with bridge NAT and VLAN" 1>&2
-+	ip netns exec nsr1 nft list ruleset
-+	ret=1
-+fi
-+
-+# restore test topology (remove bridge and VLAN)
-+ip -net nsr1 link set veth0 nomaster
-+ip -net nsr1 link set veth0 down
-+ip -net nsr1 link set veth0.10 down
-+ip -net nsr1 link delete veth0.10 type vlan
-+ip -net nsr1 link delete br0 type bridge
-+ip -net ns1 addr flush dev eth0.10
-+ip -net ns1 link set eth0.10 down
-+ip -net ns1 link set eth0 down
-+ip -net ns1 link delete eth0.10 type vlan
-+
-+# restore address in ns1 and nsr1
-+ip -net ns1 link set eth0 up
-+ip -net ns1 addr add 10.0.1.99/24 dev eth0
-+ip -net ns1 route add default via 10.0.1.1
-+ip -net ns1 addr add dead:1::99/64 dev eth0
-+ip -net ns1 route add default via dead:1::1
-+ip -net nsr1 addr add 10.0.1.1/24 dev veth0
-+ip -net nsr1 addr add dead:1::1/64 dev veth0
-+ip -net nsr1 link set up dev veth0
-+
- KEY_SHA="0x"$(ps -xaf | sha1sum | cut -d " " -f 1)
- KEY_AES="0x"$(ps -xaf | md5sum | cut -d " " -f 1)
- SPI1=$RANDOM
diff --git a/target/linux/generic/backport-5.10/610-v5.13-25-netfilter-flowtable-add-offload-support-for-xmit-pat.patch b/target/linux/generic/backport-5.10/610-v5.13-25-netfilter-flowtable-add-offload-support-for-xmit-pat.patch
deleted file mode 100644
index 7b6ec68d5559..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-25-netfilter-flowtable-add-offload-support-for-xmit-pat.patch
+++ /dev/null
@@ -1,310 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:46 +0100
-Subject: [PATCH] netfilter: flowtable: add offload support for xmit path
- types
-
-When the flow tuple xmit_type is set to FLOW_OFFLOAD_XMIT_DIRECT, the
-dst_cache pointer is not valid, and the h_source/h_dest/ifidx out fields
-need to be used.
-
-This patch also adds the FLOW_ACTION_VLAN_PUSH action to pass the VLAN
-tag to the driver.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_offload.c
-+++ b/net/netfilter/nf_flow_table_offload.c
-@@ -177,28 +177,45 @@ static int flow_offload_eth_src(struct n
- 				enum flow_offload_tuple_dir dir,
- 				struct nf_flow_rule *flow_rule)
- {
--	const struct flow_offload_tuple *tuple = &flow->tuplehash[!dir].tuple;
- 	struct flow_action_entry *entry0 = flow_action_entry_next(flow_rule);
- 	struct flow_action_entry *entry1 = flow_action_entry_next(flow_rule);
--	struct net_device *dev;
-+	const struct flow_offload_tuple *other_tuple, *this_tuple;
-+	struct net_device *dev = NULL;
-+	const unsigned char *addr;
- 	u32 mask, val;
- 	u16 val16;
- 
--	dev = dev_get_by_index(net, tuple->iifidx);
--	if (!dev)
--		return -ENOENT;
-+	this_tuple = &flow->tuplehash[dir].tuple;
-+
-+	switch (this_tuple->xmit_type) {
-+	case FLOW_OFFLOAD_XMIT_DIRECT:
-+		addr = this_tuple->out.h_source;
-+		break;
-+	case FLOW_OFFLOAD_XMIT_NEIGH:
-+		other_tuple = &flow->tuplehash[!dir].tuple;
-+		dev = dev_get_by_index(net, other_tuple->iifidx);
-+		if (!dev)
-+			return -ENOENT;
-+
-+		addr = dev->dev_addr;
-+		break;
-+	default:
-+		return -EOPNOTSUPP;
-+	}
- 
- 	mask = ~0xffff0000;
--	memcpy(&val16, dev->dev_addr, 2);
-+	memcpy(&val16, addr, 2);
- 	val = val16 << 16;
- 	flow_offload_mangle(entry0, FLOW_ACT_MANGLE_HDR_TYPE_ETH, 4,
- 			    &val, &mask);
- 
- 	mask = ~0xffffffff;
--	memcpy(&val, dev->dev_addr + 2, 4);
-+	memcpy(&val, addr + 2, 4);
- 	flow_offload_mangle(entry1, FLOW_ACT_MANGLE_HDR_TYPE_ETH, 8,
- 			    &val, &mask);
--	dev_put(dev);
-+
-+	if (dev)
-+		dev_put(dev);
- 
- 	return 0;
- }
-@@ -210,27 +227,40 @@ static int flow_offload_eth_dst(struct n
- {
- 	struct flow_action_entry *entry0 = flow_action_entry_next(flow_rule);
- 	struct flow_action_entry *entry1 = flow_action_entry_next(flow_rule);
--	const void *daddr = &flow->tuplehash[!dir].tuple.src_v4;
-+	const struct flow_offload_tuple *other_tuple, *this_tuple;
- 	const struct dst_entry *dst_cache;
- 	unsigned char ha[ETH_ALEN];
- 	struct neighbour *n;
-+	const void *daddr;
- 	u32 mask, val;
- 	u8 nud_state;
- 	u16 val16;
- 
--	dst_cache = flow->tuplehash[dir].tuple.dst_cache;
--	n = dst_neigh_lookup(dst_cache, daddr);
--	if (!n)
--		return -ENOENT;
--
--	read_lock_bh(&n->lock);
--	nud_state = n->nud_state;
--	ether_addr_copy(ha, n->ha);
--	read_unlock_bh(&n->lock);
-+	this_tuple = &flow->tuplehash[dir].tuple;
- 
--	if (!(nud_state & NUD_VALID)) {
-+	switch (this_tuple->xmit_type) {
-+	case FLOW_OFFLOAD_XMIT_DIRECT:
-+		ether_addr_copy(ha, this_tuple->out.h_dest);
-+		break;
-+	case FLOW_OFFLOAD_XMIT_NEIGH:
-+		other_tuple = &flow->tuplehash[!dir].tuple;
-+		daddr = &other_tuple->src_v4;
-+		dst_cache = this_tuple->dst_cache;
-+		n = dst_neigh_lookup(dst_cache, daddr);
-+		if (!n)
-+			return -ENOENT;
-+
-+		read_lock_bh(&n->lock);
-+		nud_state = n->nud_state;
-+		ether_addr_copy(ha, n->ha);
-+		read_unlock_bh(&n->lock);
- 		neigh_release(n);
--		return -ENOENT;
-+
-+		if (!(nud_state & NUD_VALID))
-+			return -ENOENT;
-+		break;
-+	default:
-+		return -EOPNOTSUPP;
- 	}
- 
- 	mask = ~0xffffffff;
-@@ -243,7 +273,6 @@ static int flow_offload_eth_dst(struct n
- 	val = val16;
- 	flow_offload_mangle(entry1, FLOW_ACT_MANGLE_HDR_TYPE_ETH, 4,
- 			    &val, &mask);
--	neigh_release(n);
- 
- 	return 0;
- }
-@@ -465,27 +494,52 @@ static void flow_offload_ipv4_checksum(s
- 	}
- }
- 
--static void flow_offload_redirect(const struct flow_offload *flow,
-+static void flow_offload_redirect(struct net *net,
-+				  const struct flow_offload *flow,
- 				  enum flow_offload_tuple_dir dir,
- 				  struct nf_flow_rule *flow_rule)
- {
--	struct flow_action_entry *entry = flow_action_entry_next(flow_rule);
--	struct rtable *rt;
-+	const struct flow_offload_tuple *this_tuple, *other_tuple;
-+	struct flow_action_entry *entry;
-+	struct net_device *dev;
-+	int ifindex;
-+
-+	this_tuple = &flow->tuplehash[dir].tuple;
-+	switch (this_tuple->xmit_type) {
-+	case FLOW_OFFLOAD_XMIT_DIRECT:
-+		this_tuple = &flow->tuplehash[dir].tuple;
-+		ifindex = this_tuple->out.ifidx;
-+		break;
-+	case FLOW_OFFLOAD_XMIT_NEIGH:
-+		other_tuple = &flow->tuplehash[!dir].tuple;
-+		ifindex = other_tuple->iifidx;
-+		break;
-+	default:
-+		return;
-+	}
- 
--	rt = (struct rtable *)flow->tuplehash[dir].tuple.dst_cache;
-+	dev = dev_get_by_index(net, ifindex);
-+	if (!dev)
-+		return;
-+
-+	entry = flow_action_entry_next(flow_rule);
- 	entry->id = FLOW_ACTION_REDIRECT;
--	entry->dev = rt->dst.dev;
--	dev_hold(rt->dst.dev);
-+	entry->dev = dev;
- }
- 
- static void flow_offload_encap_tunnel(const struct flow_offload *flow,
- 				      enum flow_offload_tuple_dir dir,
- 				      struct nf_flow_rule *flow_rule)
- {
-+	const struct flow_offload_tuple *this_tuple;
- 	struct flow_action_entry *entry;
- 	struct dst_entry *dst;
- 
--	dst = flow->tuplehash[dir].tuple.dst_cache;
-+	this_tuple = &flow->tuplehash[dir].tuple;
-+	if (this_tuple->xmit_type == FLOW_OFFLOAD_XMIT_DIRECT)
-+		return;
-+
-+	dst = this_tuple->dst_cache;
- 	if (dst && dst->lwtstate) {
- 		struct ip_tunnel_info *tun_info;
- 
-@@ -502,10 +556,15 @@ static void flow_offload_decap_tunnel(co
- 				      enum flow_offload_tuple_dir dir,
- 				      struct nf_flow_rule *flow_rule)
- {
-+	const struct flow_offload_tuple *other_tuple;
- 	struct flow_action_entry *entry;
- 	struct dst_entry *dst;
- 
--	dst = flow->tuplehash[!dir].tuple.dst_cache;
-+	other_tuple = &flow->tuplehash[!dir].tuple;
-+	if (other_tuple->xmit_type == FLOW_OFFLOAD_XMIT_DIRECT)
-+		return;
-+
-+	dst = other_tuple->dst_cache;
- 	if (dst && dst->lwtstate) {
- 		struct ip_tunnel_info *tun_info;
- 
-@@ -517,10 +576,14 @@ static void flow_offload_decap_tunnel(co
- 	}
- }
- 
--int nf_flow_rule_route_ipv4(struct net *net, const struct flow_offload *flow,
--			    enum flow_offload_tuple_dir dir,
--			    struct nf_flow_rule *flow_rule)
-+static int
-+nf_flow_rule_route_common(struct net *net, const struct flow_offload *flow,
-+			  enum flow_offload_tuple_dir dir,
-+			  struct nf_flow_rule *flow_rule)
- {
-+	const struct flow_offload_tuple *other_tuple;
-+	int i;
-+
- 	flow_offload_decap_tunnel(flow, dir, flow_rule);
- 	flow_offload_encap_tunnel(flow, dir, flow_rule);
- 
-@@ -528,6 +591,26 @@ int nf_flow_rule_route_ipv4(struct net *
- 	    flow_offload_eth_dst(net, flow, dir, flow_rule) < 0)
- 		return -1;
- 
-+	other_tuple = &flow->tuplehash[!dir].tuple;
-+
-+	for (i = 0; i < other_tuple->encap_num; i++) {
-+		struct flow_action_entry *entry = flow_action_entry_next(flow_rule);
-+
-+		entry->id = FLOW_ACTION_VLAN_PUSH;
-+		entry->vlan.vid = other_tuple->encap[i].id;
-+		entry->vlan.proto = other_tuple->encap[i].proto;
-+	}
-+
-+	return 0;
-+}
-+
-+int nf_flow_rule_route_ipv4(struct net *net, const struct flow_offload *flow,
-+			    enum flow_offload_tuple_dir dir,
-+			    struct nf_flow_rule *flow_rule)
-+{
-+	if (nf_flow_rule_route_common(net, flow, dir, flow_rule) < 0)
-+		return -1;
-+
- 	if (test_bit(NF_FLOW_SNAT, &flow->flags)) {
- 		flow_offload_ipv4_snat(net, flow, dir, flow_rule);
- 		flow_offload_port_snat(net, flow, dir, flow_rule);
-@@ -540,7 +623,7 @@ int nf_flow_rule_route_ipv4(struct net *
- 	    test_bit(NF_FLOW_DNAT, &flow->flags))
- 		flow_offload_ipv4_checksum(net, flow, flow_rule);
- 
--	flow_offload_redirect(flow, dir, flow_rule);
-+	flow_offload_redirect(net, flow, dir, flow_rule);
- 
- 	return 0;
- }
-@@ -550,11 +633,7 @@ int nf_flow_rule_route_ipv6(struct net *
- 			    enum flow_offload_tuple_dir dir,
- 			    struct nf_flow_rule *flow_rule)
- {
--	flow_offload_decap_tunnel(flow, dir, flow_rule);
--	flow_offload_encap_tunnel(flow, dir, flow_rule);
--
--	if (flow_offload_eth_src(net, flow, dir, flow_rule) < 0 ||
--	    flow_offload_eth_dst(net, flow, dir, flow_rule) < 0)
-+	if (nf_flow_rule_route_common(net, flow, dir, flow_rule) < 0)
- 		return -1;
- 
- 	if (test_bit(NF_FLOW_SNAT, &flow->flags)) {
-@@ -566,7 +645,7 @@ int nf_flow_rule_route_ipv6(struct net *
- 		flow_offload_port_dnat(net, flow, dir, flow_rule);
- 	}
- 
--	flow_offload_redirect(flow, dir, flow_rule);
-+	flow_offload_redirect(net, flow, dir, flow_rule);
- 
- 	return 0;
- }
-@@ -580,10 +659,10 @@ nf_flow_offload_rule_alloc(struct net *n
- 			   enum flow_offload_tuple_dir dir)
- {
- 	const struct nf_flowtable *flowtable = offload->flowtable;
-+	const struct flow_offload_tuple *tuple, *other_tuple;
- 	const struct flow_offload *flow = offload->flow;
--	const struct flow_offload_tuple *tuple;
-+	struct dst_entry *other_dst = NULL;
- 	struct nf_flow_rule *flow_rule;
--	struct dst_entry *other_dst;
- 	int err = -ENOMEM;
- 
- 	flow_rule = kzalloc(sizeof(*flow_rule), GFP_KERNEL);
-@@ -599,7 +678,10 @@ nf_flow_offload_rule_alloc(struct net *n
- 	flow_rule->rule->match.key = &flow_rule->match.key;
- 
- 	tuple = &flow->tuplehash[dir].tuple;
--	other_dst = flow->tuplehash[!dir].tuple.dst_cache;
-+	other_tuple = &flow->tuplehash[!dir].tuple;
-+	if (other_tuple->xmit_type == FLOW_OFFLOAD_XMIT_NEIGH)
-+		other_dst = other_tuple->dst_cache;
-+
- 	err = nf_flow_rule_match(&flow_rule->match, tuple, other_dst);
- 	if (err < 0)
- 		goto err_flow_match;
diff --git a/target/linux/generic/backport-5.10/610-v5.13-26-netfilter-nft_flow_offload-use-direct-xmit-if-hardwa.patch b/target/linux/generic/backport-5.10/610-v5.13-26-netfilter-nft_flow_offload-use-direct-xmit-if-hardwa.patch
deleted file mode 100644
index 56bb9fd56b4e..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-26-netfilter-nft_flow_offload-use-direct-xmit-if-hardwa.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:47 +0100
-Subject: [PATCH] netfilter: nft_flow_offload: use direct xmit if
- hardware offload is enabled
-
-If there is a forward path to reach an ethernet device and hardware
-offload is enabled, then use the direct xmit path.
-
-Moreover, store the real device in the direct xmit path info since
-software datapath uses dev_hard_header() to push the layer encapsulation
-headers while hardware offload refers to the real device.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -131,6 +131,7 @@ struct flow_offload_tuple {
- 		struct dst_entry	*dst_cache;
- 		struct {
- 			u32		ifidx;
-+			u32		hw_ifidx;
- 			u8		h_source[ETH_ALEN];
- 			u8		h_dest[ETH_ALEN];
- 		} out;
-@@ -187,6 +188,7 @@ struct nf_flow_route {
- 		} in;
- 		struct {
- 			u32			ifindex;
-+			u32			hw_ifindex;
- 			u8			h_source[ETH_ALEN];
- 			u8			h_dest[ETH_ALEN];
- 		} out;
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -106,6 +106,7 @@ static int flow_offload_fill_route(struc
- 		memcpy(flow_tuple->out.h_source, route->tuple[dir].out.h_source,
- 		       ETH_ALEN);
- 		flow_tuple->out.ifidx = route->tuple[dir].out.ifindex;
-+		flow_tuple->out.hw_ifidx = route->tuple[dir].out.hw_ifindex;
- 		break;
- 	case FLOW_OFFLOAD_XMIT_XFRM:
- 	case FLOW_OFFLOAD_XMIT_NEIGH:
---- a/net/netfilter/nf_flow_table_offload.c
-+++ b/net/netfilter/nf_flow_table_offload.c
-@@ -508,7 +508,7 @@ static void flow_offload_redirect(struct
- 	switch (this_tuple->xmit_type) {
- 	case FLOW_OFFLOAD_XMIT_DIRECT:
- 		this_tuple = &flow->tuplehash[dir].tuple;
--		ifindex = this_tuple->out.ifidx;
-+		ifindex = this_tuple->out.hw_ifidx;
- 		break;
- 	case FLOW_OFFLOAD_XMIT_NEIGH:
- 		other_tuple = &flow->tuplehash[!dir].tuple;
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -66,6 +66,7 @@ static int nft_dev_fill_forward_path(con
- struct nft_forward_info {
- 	const struct net_device *indev;
- 	const struct net_device *outdev;
-+	const struct net_device *hw_outdev;
- 	struct id {
- 		__u16	id;
- 		__be16	proto;
-@@ -76,9 +77,18 @@ struct nft_forward_info {
- 	enum flow_offload_xmit_type xmit_type;
- };
- 
-+static bool nft_is_valid_ether_device(const struct net_device *dev)
-+{
-+	if (!dev || (dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
-+	    dev->addr_len != ETH_ALEN || !is_valid_ether_addr(dev->dev_addr))
-+		return false;
-+
-+	return true;
-+}
-+
- static void nft_dev_path_info(const struct net_device_path_stack *stack,
- 			      struct nft_forward_info *info,
--			      unsigned char *ha)
-+			      unsigned char *ha, struct nf_flowtable *flowtable)
- {
- 	const struct net_device_path *path;
- 	int i;
-@@ -140,6 +150,12 @@ static void nft_dev_path_info(const stru
- 	}
- 	if (!info->outdev)
- 		info->outdev = info->indev;
-+
-+	info->hw_outdev = info->indev;
-+
-+	if (nf_flowtable_hw_offload(flowtable) &&
-+	    nft_is_valid_ether_device(info->indev))
-+		info->xmit_type = FLOW_OFFLOAD_XMIT_DIRECT;
- }
- 
- static bool nft_flowtable_find_dev(const struct net_device *dev,
-@@ -171,7 +187,7 @@ static void nft_dev_forward_path(struct
- 	int i;
- 
- 	if (nft_dev_fill_forward_path(route, dst, ct, dir, ha, &stack) >= 0)
--		nft_dev_path_info(&stack, &info, ha);
-+		nft_dev_path_info(&stack, &info, ha, &ft->data);
- 
- 	if (!info.indev || !nft_flowtable_find_dev(info.indev, ft))
- 		return;
-@@ -187,6 +203,7 @@ static void nft_dev_forward_path(struct
- 		memcpy(route->tuple[dir].out.h_source, info.h_source, ETH_ALEN);
- 		memcpy(route->tuple[dir].out.h_dest, info.h_dest, ETH_ALEN);
- 		route->tuple[dir].out.ifindex = info.outdev->ifindex;
-+		route->tuple[dir].out.hw_ifindex = info.hw_outdev->ifindex;
- 		route->tuple[dir].xmit_type = info.xmit_type;
- 	}
- }
diff --git a/target/linux/generic/backport-5.10/610-v5.13-27-netfilter-flowtable-bridge-vlan-hardware-offload-and.patch b/target/linux/generic/backport-5.10/610-v5.13-27-netfilter-flowtable-bridge-vlan-hardware-offload-and.patch
deleted file mode 100644
index 08c92d731a3a..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-27-netfilter-flowtable-bridge-vlan-hardware-offload-and.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 24 Mar 2021 02:30:48 +0100
-Subject: [PATCH] netfilter: flowtable: bridge vlan hardware offload and
- switchdev
-
-The switch might have already added the VLAN tag through PVID hardware
-offload. Keep this extra VLAN in the flowtable but skip it on egress.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -872,6 +872,7 @@ struct net_device_path {
- 				DEV_PATH_BR_VLAN_KEEP,
- 				DEV_PATH_BR_VLAN_TAG,
- 				DEV_PATH_BR_VLAN_UNTAG,
-+				DEV_PATH_BR_VLAN_UNTAG_HW,
- 			}		vlan_mode;
- 			u16		vlan_id;
- 			__be16		vlan_proto;
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -123,9 +123,10 @@ struct flow_offload_tuple {
- 	/* All members above are keys for lookups, see flow_offload_hash(). */
- 	struct { }			__hash;
- 
--	u8				dir:4,
-+	u8				dir:2,
- 					xmit_type:2,
--					encap_num:2;
-+					encap_num:2,
-+					in_vlan_ingress:2;
- 	u16				mtu;
- 	union {
- 		struct dst_entry	*dst_cache;
-@@ -184,7 +185,8 @@ struct nf_flow_route {
- 				u16		id;
- 				__be16		proto;
- 			} encap[NF_FLOW_TABLE_ENCAP_MAX];
--			u8			num_encaps;
-+			u8			num_encaps:2,
-+						ingress_vlans:2;
- 		} in;
- 		struct {
- 			u32			ifindex;
---- a/net/bridge/br_device.c
-+++ b/net/bridge/br_device.c
-@@ -435,6 +435,7 @@ static int br_fill_forward_path(struct n
- 		ctx->vlan[ctx->num_vlans].proto = path->bridge.vlan_proto;
- 		ctx->num_vlans++;
- 		break;
-+	case DEV_PATH_BR_VLAN_UNTAG_HW:
- 	case DEV_PATH_BR_VLAN_UNTAG:
- 		ctx->num_vlans--;
- 		break;
---- a/net/bridge/br_vlan.c
-+++ b/net/bridge/br_vlan.c
-@@ -1397,6 +1397,8 @@ int br_vlan_fill_forward_path_mode(struc
- 
- 	if (path->bridge.vlan_mode == DEV_PATH_BR_VLAN_TAG)
- 		path->bridge.vlan_mode = DEV_PATH_BR_VLAN_KEEP;
-+	else if (v->priv_flags & BR_VLFLAG_ADDED_BY_SWITCHDEV)
-+		path->bridge.vlan_mode = DEV_PATH_BR_VLAN_UNTAG_HW;
- 	else
- 		path->bridge.vlan_mode = DEV_PATH_BR_VLAN_UNTAG;
- 
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -95,6 +95,8 @@ static int flow_offload_fill_route(struc
- 	for (i = route->tuple[dir].in.num_encaps - 1; i >= 0; i--) {
- 		flow_tuple->encap[j].id = route->tuple[dir].in.encap[i].id;
- 		flow_tuple->encap[j].proto = route->tuple[dir].in.encap[i].proto;
-+		if (route->tuple[dir].in.ingress_vlans & BIT(i))
-+			flow_tuple->in_vlan_ingress |= BIT(j);
- 		j++;
- 	}
- 	flow_tuple->encap_num = route->tuple[dir].in.num_encaps;
---- a/net/netfilter/nf_flow_table_offload.c
-+++ b/net/netfilter/nf_flow_table_offload.c
-@@ -594,8 +594,12 @@ nf_flow_rule_route_common(struct net *ne
- 	other_tuple = &flow->tuplehash[!dir].tuple;
- 
- 	for (i = 0; i < other_tuple->encap_num; i++) {
--		struct flow_action_entry *entry = flow_action_entry_next(flow_rule);
-+		struct flow_action_entry *entry;
- 
-+		if (other_tuple->in_vlan_ingress & BIT(i))
-+			continue;
-+
-+		entry = flow_action_entry_next(flow_rule);
- 		entry->id = FLOW_ACTION_VLAN_PUSH;
- 		entry->vlan.vid = other_tuple->encap[i].id;
- 		entry->vlan.proto = other_tuple->encap[i].proto;
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -72,6 +72,7 @@ struct nft_forward_info {
- 		__be16	proto;
- 	} encap[NF_FLOW_TABLE_ENCAP_MAX];
- 	u8 num_encaps;
-+	u8 ingress_vlans;
- 	u8 h_source[ETH_ALEN];
- 	u8 h_dest[ETH_ALEN];
- 	enum flow_offload_xmit_type xmit_type;
-@@ -130,6 +131,9 @@ static void nft_dev_path_info(const stru
- 				memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN);
- 
- 			switch (path->bridge.vlan_mode) {
-+			case DEV_PATH_BR_VLAN_UNTAG_HW:
-+				info->ingress_vlans |= BIT(info->num_encaps - 1);
-+				break;
- 			case DEV_PATH_BR_VLAN_TAG:
- 				info->encap[info->num_encaps].id = path->bridge.vlan_id;
- 				info->encap[info->num_encaps].proto = path->bridge.vlan_proto;
-@@ -198,6 +202,7 @@ static void nft_dev_forward_path(struct
- 		route->tuple[!dir].in.encap[i].proto = info.encap[i].proto;
- 	}
- 	route->tuple[!dir].in.num_encaps = info.num_encaps;
-+	route->tuple[!dir].in.ingress_vlans = info.ingress_vlans;
- 
- 	if (info.xmit_type == FLOW_OFFLOAD_XMIT_DIRECT) {
- 		memcpy(route->tuple[dir].out.h_source, info.h_source, ETH_ALEN);
diff --git a/target/linux/generic/backport-5.10/610-v5.13-28-net-flow_offload-add-FLOW_ACTION_PPPOE_PUSH.patch b/target/linux/generic/backport-5.10/610-v5.13-28-net-flow_offload-add-FLOW_ACTION_PPPOE_PUSH.patch
deleted file mode 100644
index 64eae6871f31..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-28-net-flow_offload-add-FLOW_ACTION_PPPOE_PUSH.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:49 +0100
-Subject: [PATCH] net: flow_offload: add FLOW_ACTION_PPPOE_PUSH
-
-Add an action to represent the PPPoE hardware offload support that
-includes the session ID.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/flow_offload.h
-+++ b/include/net/flow_offload.h
-@@ -147,6 +147,7 @@ enum flow_action_id {
- 	FLOW_ACTION_MPLS_POP,
- 	FLOW_ACTION_MPLS_MANGLE,
- 	FLOW_ACTION_GATE,
-+	FLOW_ACTION_PPPOE_PUSH,
- 	NUM_FLOW_ACTIONS,
- };
- 
-@@ -271,6 +272,9 @@ struct flow_action_entry {
- 			u32		num_entries;
- 			struct action_gate_entry *entries;
- 		} gate;
-+		struct {				/* FLOW_ACTION_PPPOE_PUSH */
-+			u16		sid;
-+		} pppoe;
- 	};
- 	struct flow_action_cookie *cookie; /* user defined action cookie */
- };
diff --git a/target/linux/generic/backport-5.10/610-v5.13-29-netfilter-flowtable-support-for-FLOW_ACTION_PPPOE_PU.patch b/target/linux/generic/backport-5.10/610-v5.13-29-netfilter-flowtable-support-for-FLOW_ACTION_PPPOE_PU.patch
deleted file mode 100644
index ed7346a61a39..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-29-netfilter-flowtable-support-for-FLOW_ACTION_PPPOE_PU.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:50 +0100
-Subject: [PATCH] netfilter: flowtable: support for
- FLOW_ACTION_PPPOE_PUSH
-
-Add a PPPoE push action if layer 2 protocol is ETH_P_PPP_SES to add
-PPPoE flowtable hardware offload support.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_offload.c
-+++ b/net/netfilter/nf_flow_table_offload.c
-@@ -600,9 +600,18 @@ nf_flow_rule_route_common(struct net *ne
- 			continue;
- 
- 		entry = flow_action_entry_next(flow_rule);
--		entry->id = FLOW_ACTION_VLAN_PUSH;
--		entry->vlan.vid = other_tuple->encap[i].id;
--		entry->vlan.proto = other_tuple->encap[i].proto;
-+
-+		switch (other_tuple->encap[i].proto) {
-+		case htons(ETH_P_PPP_SES):
-+			entry->id = FLOW_ACTION_PPPOE_PUSH;
-+			entry->pppoe.sid = other_tuple->encap[i].id;
-+			break;
-+		case htons(ETH_P_8021Q):
-+			entry->id = FLOW_ACTION_VLAN_PUSH;
-+			entry->vlan.vid = other_tuple->encap[i].id;
-+			entry->vlan.proto = other_tuple->encap[i].proto;
-+			break;
-+		}
- 	}
- 
- 	return 0;
diff --git a/target/linux/generic/backport-5.10/610-v5.13-30-dsa-slave-add-support-for-TC_SETUP_FT.patch b/target/linux/generic/backport-5.10/610-v5.13-30-dsa-slave-add-support-for-TC_SETUP_FT.patch
deleted file mode 100644
index 72675dc294a9..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-30-dsa-slave-add-support-for-TC_SETUP_FT.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:51 +0100
-Subject: [PATCH] dsa: slave: add support for TC_SETUP_FT
-
-The dsa infrastructure provides a well-defined hierarchy of devices,
-pass up the call to set up the flow block to the master device. From the
-software dataplane, the netfilter infrastructure uses the dsa slave
-devices to refer to the input and output device for the given skbuff.
-Similarly, the flowtable definition in the ruleset refers to the dsa
-slave port devices.
-
-This patch adds the glue code to call ndo_setup_tc with TC_SETUP_FT
-with the master device via the dsa slave devices.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1239,14 +1239,32 @@ static int dsa_slave_setup_tc_block(stru
- 	}
- }
- 
-+static int dsa_slave_setup_ft_block(struct dsa_switch *ds, int port,
-+				    void *type_data)
-+{
-+	struct dsa_port *cpu_dp = dsa_to_port(ds, port)->cpu_dp;
-+	struct net_device *master = cpu_dp->master;
-+
-+	if (!master->netdev_ops->ndo_setup_tc)
-+		return -EOPNOTSUPP;
-+
-+	return master->netdev_ops->ndo_setup_tc(master, TC_SETUP_FT, type_data);
-+}
-+
- static int dsa_slave_setup_tc(struct net_device *dev, enum tc_setup_type type,
- 			      void *type_data)
- {
- 	struct dsa_port *dp = dsa_slave_to_port(dev);
- 	struct dsa_switch *ds = dp->ds;
- 
--	if (type == TC_SETUP_BLOCK)
-+	switch (type) {
-+	case TC_SETUP_BLOCK:
- 		return dsa_slave_setup_tc_block(dev, type_data);
-+	case TC_SETUP_FT:
-+		return dsa_slave_setup_ft_block(ds, dp->index, type_data);
-+	default:
-+		break;
-+	}
- 
- 	if (!ds->ops->port_setup_tc)
- 		return -EOPNOTSUPP;
diff --git a/target/linux/generic/backport-5.10/610-v5.13-31-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch b/target/linux/generic/backport-5.10/610-v5.13-31-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch
deleted file mode 100644
index 3be60aee1d2a..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-31-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 24 Mar 2021 02:30:52 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: fix parsing packets in GDM
-
-When using DSA, set the special tag in GDM ingress control to allow the MAC
-to parse packets properly earlier. This affects rx DMA source port reporting.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -19,6 +19,7 @@
- #include <linux/interrupt.h>
- #include <linux/pinctrl/devinfo.h>
- #include <linux/phylink.h>
-+#include <net/dsa.h>
- 
- #include "mtk_eth_soc.h"
- 
-@@ -1297,13 +1298,12 @@ static int mtk_poll_rx(struct napi_struc
- 			break;
- 
- 		/* find out which mac the packet come from. values start at 1 */
--		if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) ||
-+		    (trxd.rxd4 & RX_DMA_SPECIAL_TAG))
- 			mac = 0;
--		} else {
--			mac = (trxd.rxd4 >> RX_DMA_FPORT_SHIFT) &
--				RX_DMA_FPORT_MASK;
--			mac--;
--		}
-+		else
-+			mac = ((trxd.rxd4 >> RX_DMA_FPORT_SHIFT) &
-+			       RX_DMA_FPORT_MASK) - 1;
- 
- 		if (unlikely(mac < 0 || mac >= MTK_MAC_COUNT ||
- 			     !eth->netdev[mac]))
-@@ -2275,6 +2275,9 @@ static void mtk_gdm_config(struct mtk_et
- 
- 		val |= config;
- 
-+		if (!i && eth->netdev[0] && netdev_uses_dsa(eth->netdev[0]))
-+			val |= MTK_GDMA_SPECIAL_TAG;
-+
- 		mtk_w32(eth, val, MTK_GDMA_FWD_CFG(i));
- 	}
- 	/* Reset and enable PSE */
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -81,6 +81,7 @@
- 
- /* GDM Exgress Control Register */
- #define MTK_GDMA_FWD_CFG(x)	(0x500 + (x * 0x1000))
-+#define MTK_GDMA_SPECIAL_TAG	BIT(24)
- #define MTK_GDMA_ICS_EN		BIT(22)
- #define MTK_GDMA_TCS_EN		BIT(21)
- #define MTK_GDMA_UCS_EN		BIT(20)
-@@ -318,6 +319,7 @@
- #define RX_DMA_L4_VALID_PDMA	BIT(30)		/* when PDMA is used */
- #define RX_DMA_FPORT_SHIFT	19
- #define RX_DMA_FPORT_MASK	0x7
-+#define RX_DMA_SPECIAL_TAG	BIT(22)
- 
- /* PHY Indirect Access Control registers */
- #define MTK_PHY_IAC		0x10004
diff --git a/target/linux/generic/backport-5.10/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch b/target/linux/generic/backport-5.10/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch
deleted file mode 100644
index 9378c3d422a5..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch
+++ /dev/null
@@ -1,1312 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 24 Mar 2021 02:30:53 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: add support for
- initializing the PPE
-
-The PPE (packet processing engine) is used to offload NAT/routed or even
-bridged flows. This patch brings up the PPE and uses it to get a packet
-hash. It also contains some functionality that will be used to bring up
-flow offloading.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
- create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe.c
- create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe.h
- create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
- create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe_regs.h
-
---- a/drivers/net/ethernet/mediatek/Makefile
-+++ b/drivers/net/ethernet/mediatek/Makefile
-@@ -4,5 +4,5 @@
- #
- 
- obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o
--mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o
-+mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o
- obj-$(CONFIG_NET_MEDIATEK_STAR_EMAC) += mtk_star_emac.o
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2300,7 +2300,10 @@ static int mtk_open(struct net_device *d
- 
- 	/* we run 2 netdevs on the same dma ring so we only bring it up once */
- 	if (!refcount_read(&eth->dma_refcnt)) {
--		int err = mtk_start_dma(eth);
-+		u32 gdm_config = MTK_GDMA_TO_PDMA;
-+		int err;
-+
-+		err = mtk_start_dma(eth);
- 
- 		if (err)
- 		if (err) {
-@@ -2308,7 +2311,10 @@ static int mtk_open(struct net_device *d
- 			return err;
- 		}
- 
--		mtk_gdm_config(eth, MTK_GDMA_TO_PDMA);
-+		if (eth->soc->offload_version && mtk_ppe_start(&eth->ppe) == 0)
-+			gdm_config = MTK_GDMA_TO_PPE;
-+
-+		mtk_gdm_config(eth, gdm_config);
- 
- 		napi_enable(&eth->tx_napi);
- 		napi_enable(&eth->rx_napi);
-@@ -2375,6 +2381,9 @@ static int mtk_stop(struct net_device *d
- 
- 	mtk_dma_free(eth);
- 
-+	if (eth->soc->offload_version)
-+		mtk_ppe_stop(&eth->ppe);
-+
- 	return 0;
- }
- 
-@@ -3103,6 +3112,13 @@ static int mtk_probe(struct platform_dev
- 			goto err_free_dev;
- 	}
- 
-+	if (eth->soc->offload_version) {
-+		err = mtk_ppe_init(&eth->ppe, eth->dev,
-+				   eth->base + MTK_ETH_PPE_BASE, 2);
-+		if (err)
-+			goto err_free_dev;
-+	}
-+
- 	for (i = 0; i < MTK_MAX_DEVS; i++) {
- 		if (!eth->netdev[i])
- 			continue;
-@@ -3177,6 +3193,7 @@ static const struct mtk_soc_data mt7621_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7621_CLKS_BITMAP,
- 	.required_pctl = false,
-+	.offload_version = 2,
- };
- 
- static const struct mtk_soc_data mt7622_data = {
-@@ -3185,6 +3202,7 @@ static const struct mtk_soc_data mt7622_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7622_CLKS_BITMAP,
- 	.required_pctl = false,
-+	.offload_version = 2,
- };
- 
- static const struct mtk_soc_data mt7623_data = {
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -15,6 +15,7 @@
- #include <linux/u64_stats_sync.h>
- #include <linux/refcount.h>
- #include <linux/phylink.h>
-+#include "mtk_ppe.h"
- 
- #define MTK_QDMA_PAGE_SIZE	2048
- #define	MTK_MAX_RX_LENGTH	1536
-@@ -86,6 +87,7 @@
- #define MTK_GDMA_TCS_EN		BIT(21)
- #define MTK_GDMA_UCS_EN		BIT(20)
- #define MTK_GDMA_TO_PDMA	0x0
-+#define MTK_GDMA_TO_PPE		0x4444
- #define MTK_GDMA_DROP_ALL       0x7777
- 
- /* Unicast Filter MAC Address Register - Low */
-@@ -315,6 +317,12 @@
- #define RX_DMA_VID(_x)		((_x) & 0xfff)
- 
- /* QDMA descriptor rxd4 */
-+#define MTK_RXD4_FOE_ENTRY	GENMASK(13, 0)
-+#define MTK_RXD4_PPE_CPU_REASON	GENMASK(18, 14)
-+#define MTK_RXD4_SRC_PORT	GENMASK(21, 19)
-+#define MTK_RXD4_ALG		GENMASK(31, 22)
-+
-+/* QDMA descriptor rxd4 */
- #define RX_DMA_L4_VALID		BIT(24)
- #define RX_DMA_L4_VALID_PDMA	BIT(30)		/* when PDMA is used */
- #define RX_DMA_FPORT_SHIFT	19
-@@ -820,6 +828,7 @@ struct mtk_soc_data {
- 	u32		caps;
- 	u32		required_clks;
- 	bool		required_pctl;
-+	u8		offload_version;
- 	netdev_features_t hw_features;
- };
- 
-@@ -919,6 +928,8 @@ struct mtk_eth {
- 	u32				tx_int_status_reg;
- 	u32				rx_dma_l4_valid;
- 	int				ip_align;
-+
-+	struct mtk_ppe			ppe;
- };
- 
- /* struct mtk_mac -	the structure that holds the info about the MACs of the
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -0,0 +1,511 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2020 Felix Fietkau <nbd@nbd.name> */
-+
-+#include <linux/kernel.h>
-+#include <linux/jiffies.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/etherdevice.h>
-+#include <linux/platform_device.h>
-+#include "mtk_ppe.h"
-+#include "mtk_ppe_regs.h"
-+
-+static void ppe_w32(struct mtk_ppe *ppe, u32 reg, u32 val)
-+{
-+	writel(val, ppe->base + reg);
-+}
-+
-+static u32 ppe_r32(struct mtk_ppe *ppe, u32 reg)
-+{
-+	return readl(ppe->base + reg);
-+}
-+
-+static u32 ppe_m32(struct mtk_ppe *ppe, u32 reg, u32 mask, u32 set)
-+{
-+	u32 val;
-+
-+	val = ppe_r32(ppe, reg);
-+	val &= ~mask;
-+	val |= set;
-+	ppe_w32(ppe, reg, val);
-+
-+	return val;
-+}
-+
-+static u32 ppe_set(struct mtk_ppe *ppe, u32 reg, u32 val)
-+{
-+	return ppe_m32(ppe, reg, 0, val);
-+}
-+
-+static u32 ppe_clear(struct mtk_ppe *ppe, u32 reg, u32 val)
-+{
-+	return ppe_m32(ppe, reg, val, 0);
-+}
-+
-+static int mtk_ppe_wait_busy(struct mtk_ppe *ppe)
-+{
-+	unsigned long timeout = jiffies + HZ;
-+
-+	while (time_is_before_jiffies(timeout)) {
-+		if (!(ppe_r32(ppe, MTK_PPE_GLO_CFG) & MTK_PPE_GLO_CFG_BUSY))
-+			return 0;
-+
-+		usleep_range(10, 20);
-+	}
-+
-+	dev_err(ppe->dev, "PPE table busy");
-+
-+	return -ETIMEDOUT;
-+}
-+
-+static void mtk_ppe_cache_clear(struct mtk_ppe *ppe)
-+{
-+	ppe_set(ppe, MTK_PPE_CACHE_CTL, MTK_PPE_CACHE_CTL_CLEAR);
-+	ppe_clear(ppe, MTK_PPE_CACHE_CTL, MTK_PPE_CACHE_CTL_CLEAR);
-+}
-+
-+static void mtk_ppe_cache_enable(struct mtk_ppe *ppe, bool enable)
-+{
-+	mtk_ppe_cache_clear(ppe);
-+
-+	ppe_m32(ppe, MTK_PPE_CACHE_CTL, MTK_PPE_CACHE_CTL_EN,
-+		enable * MTK_PPE_CACHE_CTL_EN);
-+}
-+
-+static u32 mtk_ppe_hash_entry(struct mtk_foe_entry *e)
-+{
-+	u32 hv1, hv2, hv3;
-+	u32 hash;
-+
-+	switch (FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, e->ib1)) {
-+		case MTK_PPE_PKT_TYPE_BRIDGE:
-+			hv1 = e->bridge.src_mac_lo;
-+			hv1 ^= ((e->bridge.src_mac_hi & 0xffff) << 16);
-+			hv2 = e->bridge.src_mac_hi >> 16;
-+			hv2 ^= e->bridge.dest_mac_lo;
-+			hv3 = e->bridge.dest_mac_hi;
-+			break;
-+		case MTK_PPE_PKT_TYPE_IPV4_ROUTE:
-+		case MTK_PPE_PKT_TYPE_IPV4_HNAPT:
-+			hv1 = e->ipv4.orig.ports;
-+			hv2 = e->ipv4.orig.dest_ip;
-+			hv3 = e->ipv4.orig.src_ip;
-+			break;
-+		case MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T:
-+		case MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T:
-+			hv1 = e->ipv6.src_ip[3] ^ e->ipv6.dest_ip[3];
-+			hv1 ^= e->ipv6.ports;
-+
-+			hv2 = e->ipv6.src_ip[2] ^ e->ipv6.dest_ip[2];
-+			hv2 ^= e->ipv6.dest_ip[0];
-+
-+			hv3 = e->ipv6.src_ip[1] ^ e->ipv6.dest_ip[1];
-+			hv3 ^= e->ipv6.src_ip[0];
-+			break;
-+		case MTK_PPE_PKT_TYPE_IPV4_DSLITE:
-+		case MTK_PPE_PKT_TYPE_IPV6_6RD:
-+		default:
-+			WARN_ON_ONCE(1);
-+			return MTK_PPE_HASH_MASK;
-+	}
-+
-+	hash = (hv1 & hv2) | ((~hv1) & hv3);
-+	hash = (hash >> 24) | ((hash & 0xffffff) << 8);
-+	hash ^= hv1 ^ hv2 ^ hv3;
-+	hash ^= hash >> 16;
-+	hash <<= 1;
-+	hash &= MTK_PPE_ENTRIES - 1;
-+
-+	return hash;
-+}
-+
-+static inline struct mtk_foe_mac_info *
-+mtk_foe_entry_l2(struct mtk_foe_entry *entry)
-+{
-+	int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
-+
-+	if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE)
-+		return &entry->ipv6.l2;
-+
-+	return &entry->ipv4.l2;
-+}
-+
-+static inline u32 *
-+mtk_foe_entry_ib2(struct mtk_foe_entry *entry)
-+{
-+	int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
-+
-+	if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE)
-+		return &entry->ipv6.ib2;
-+
-+	return &entry->ipv4.ib2;
-+}
-+
-+int mtk_foe_entry_prepare(struct mtk_foe_entry *entry, int type, int l4proto,
-+			  u8 pse_port, u8 *src_mac, u8 *dest_mac)
-+{
-+	struct mtk_foe_mac_info *l2;
-+	u32 ports_pad, val;
-+
-+	memset(entry, 0, sizeof(*entry));
-+
-+	val = FIELD_PREP(MTK_FOE_IB1_STATE, MTK_FOE_STATE_BIND) |
-+	      FIELD_PREP(MTK_FOE_IB1_PACKET_TYPE, type) |
-+	      FIELD_PREP(MTK_FOE_IB1_UDP, l4proto == IPPROTO_UDP) |
-+	      MTK_FOE_IB1_BIND_TTL |
-+	      MTK_FOE_IB1_BIND_CACHE;
-+	entry->ib1 = val;
-+
-+	val = FIELD_PREP(MTK_FOE_IB2_PORT_MG, 0x3f) |
-+	      FIELD_PREP(MTK_FOE_IB2_PORT_AG, 0x1f) |
-+	      FIELD_PREP(MTK_FOE_IB2_DEST_PORT, pse_port);
-+
-+	if (is_multicast_ether_addr(dest_mac))
-+		val |= MTK_FOE_IB2_MULTICAST;
-+
-+	ports_pad = 0xa5a5a500 | (l4proto & 0xff);
-+	if (type == MTK_PPE_PKT_TYPE_IPV4_ROUTE)
-+		entry->ipv4.orig.ports = ports_pad;
-+	if (type == MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T)
-+		entry->ipv6.ports = ports_pad;
-+
-+	if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE) {
-+		entry->ipv6.ib2 = val;
-+		l2 = &entry->ipv6.l2;
-+	} else {
-+		entry->ipv4.ib2 = val;
-+		l2 = &entry->ipv4.l2;
-+	}
-+
-+	l2->dest_mac_hi = get_unaligned_be32(dest_mac);
-+	l2->dest_mac_lo = get_unaligned_be16(dest_mac + 4);
-+	l2->src_mac_hi = get_unaligned_be32(src_mac);
-+	l2->src_mac_lo = get_unaligned_be16(src_mac + 4);
-+
-+	if (type >= MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T)
-+		l2->etype = ETH_P_IPV6;
-+	else
-+		l2->etype = ETH_P_IP;
-+
-+	return 0;
-+}
-+
-+int mtk_foe_entry_set_pse_port(struct mtk_foe_entry *entry, u8 port)
-+{
-+	u32 *ib2 = mtk_foe_entry_ib2(entry);
-+	u32 val;
-+
-+	val = *ib2;
-+	val &= ~MTK_FOE_IB2_DEST_PORT;
-+	val |= FIELD_PREP(MTK_FOE_IB2_DEST_PORT, port);
-+	*ib2 = val;
-+
-+	return 0;
-+}
-+
-+int mtk_foe_entry_set_ipv4_tuple(struct mtk_foe_entry *entry, bool egress,
-+				 __be32 src_addr, __be16 src_port,
-+				 __be32 dest_addr, __be16 dest_port)
-+{
-+	int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
-+	struct mtk_ipv4_tuple *t;
-+
-+	switch (type) {
-+	case MTK_PPE_PKT_TYPE_IPV4_HNAPT:
-+		if (egress) {
-+			t = &entry->ipv4.new;
-+			break;
-+		}
-+		fallthrough;
-+	case MTK_PPE_PKT_TYPE_IPV4_DSLITE:
-+	case MTK_PPE_PKT_TYPE_IPV4_ROUTE:
-+		t = &entry->ipv4.orig;
-+		break;
-+	case MTK_PPE_PKT_TYPE_IPV6_6RD:
-+		entry->ipv6_6rd.tunnel_src_ip = be32_to_cpu(src_addr);
-+		entry->ipv6_6rd.tunnel_dest_ip = be32_to_cpu(dest_addr);
-+		return 0;
-+	default:
-+		WARN_ON_ONCE(1);
-+		return -EINVAL;
-+	}
-+
-+	t->src_ip = be32_to_cpu(src_addr);
-+	t->dest_ip = be32_to_cpu(dest_addr);
-+
-+	if (type == MTK_PPE_PKT_TYPE_IPV4_ROUTE)
-+		return 0;
-+
-+	t->src_port = be16_to_cpu(src_port);
-+	t->dest_port = be16_to_cpu(dest_port);
-+
-+	return 0;
-+}
-+
-+int mtk_foe_entry_set_ipv6_tuple(struct mtk_foe_entry *entry,
-+				 __be32 *src_addr, __be16 src_port,
-+				 __be32 *dest_addr, __be16 dest_port)
-+{
-+	int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
-+	u32 *src, *dest;
-+	int i;
-+
-+	switch (type) {
-+	case MTK_PPE_PKT_TYPE_IPV4_DSLITE:
-+		src = entry->dslite.tunnel_src_ip;
-+		dest = entry->dslite.tunnel_dest_ip;
-+		break;
-+	case MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T:
-+	case MTK_PPE_PKT_TYPE_IPV6_6RD:
-+		entry->ipv6.src_port = be16_to_cpu(src_port);
-+		entry->ipv6.dest_port = be16_to_cpu(dest_port);
-+		fallthrough;
-+	case MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T:
-+		src = entry->ipv6.src_ip;
-+		dest = entry->ipv6.dest_ip;
-+		break;
-+	default:
-+		WARN_ON_ONCE(1);
-+		return -EINVAL;
-+	};
-+
-+	for (i = 0; i < 4; i++)
-+		src[i] = be32_to_cpu(src_addr[i]);
-+	for (i = 0; i < 4; i++)
-+		dest[i] = be32_to_cpu(dest_addr[i]);
-+
-+	return 0;
-+}
-+
-+int mtk_foe_entry_set_dsa(struct mtk_foe_entry *entry, int port)
-+{
-+	struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(entry);
-+
-+	l2->etype = BIT(port);
-+
-+	if (!(entry->ib1 & MTK_FOE_IB1_BIND_VLAN_LAYER))
-+		entry->ib1 |= FIELD_PREP(MTK_FOE_IB1_BIND_VLAN_LAYER, 1);
-+	else
-+		l2->etype |= BIT(8);
-+
-+	entry->ib1 &= ~MTK_FOE_IB1_BIND_VLAN_TAG;
-+
-+	return 0;
-+}
-+
-+int mtk_foe_entry_set_vlan(struct mtk_foe_entry *entry, int vid)
-+{
-+	struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(entry);
-+
-+	switch (FIELD_GET(MTK_FOE_IB1_BIND_VLAN_LAYER, entry->ib1)) {
-+	case 0:
-+		entry->ib1 |= MTK_FOE_IB1_BIND_VLAN_TAG |
-+			      FIELD_PREP(MTK_FOE_IB1_BIND_VLAN_LAYER, 1);
-+		l2->vlan1 = vid;
-+		return 0;
-+	case 1:
-+		if (!(entry->ib1 & MTK_FOE_IB1_BIND_VLAN_TAG)) {
-+			l2->vlan1 = vid;
-+			l2->etype |= BIT(8);
-+		} else {
-+			l2->vlan2 = vid;
-+			entry->ib1 += FIELD_PREP(MTK_FOE_IB1_BIND_VLAN_LAYER, 1);
-+		}
-+		return 0;
-+	default:
-+		return -ENOSPC;
-+	}
-+}
-+
-+int mtk_foe_entry_set_pppoe(struct mtk_foe_entry *entry, int sid)
-+{
-+	struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(entry);
-+
-+	if (!(entry->ib1 & MTK_FOE_IB1_BIND_VLAN_LAYER) ||
-+	    (entry->ib1 & MTK_FOE_IB1_BIND_VLAN_TAG))
-+		l2->etype = ETH_P_PPP_SES;
-+
-+	entry->ib1 |= MTK_FOE_IB1_BIND_PPPOE;
-+	l2->pppoe_id = sid;
-+
-+	return 0;
-+}
-+
-+static inline bool mtk_foe_entry_usable(struct mtk_foe_entry *entry)
-+{
-+	return !(entry->ib1 & MTK_FOE_IB1_STATIC) &&
-+	       FIELD_GET(MTK_FOE_IB1_STATE, entry->ib1) != MTK_FOE_STATE_BIND;
-+}
-+
-+int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_foe_entry *entry,
-+			 u16 timestamp)
-+{
-+	struct mtk_foe_entry *hwe;
-+	u32 hash;
-+
-+	timestamp &= MTK_FOE_IB1_BIND_TIMESTAMP;
-+	entry->ib1 &= ~MTK_FOE_IB1_BIND_TIMESTAMP;
-+	entry->ib1 |= FIELD_PREP(MTK_FOE_IB1_BIND_TIMESTAMP, timestamp);
-+
-+	hash = mtk_ppe_hash_entry(entry);
-+	hwe = &ppe->foe_table[hash];
-+	if (!mtk_foe_entry_usable(hwe)) {
-+		hwe++;
-+		hash++;
-+
-+		if (!mtk_foe_entry_usable(hwe))
-+			return -ENOSPC;
-+	}
-+
-+	memcpy(&hwe->data, &entry->data, sizeof(hwe->data));
-+	wmb();
-+	hwe->ib1 = entry->ib1;
-+
-+	dma_wmb();
-+
-+	mtk_ppe_cache_clear(ppe);
-+
-+	return hash;
-+}
-+
-+int mtk_ppe_init(struct mtk_ppe *ppe, struct device *dev, void __iomem *base,
-+		 int version)
-+{
-+	struct mtk_foe_entry *foe;
-+
-+	/* need to allocate a separate device, since it PPE DMA access is
-+	 * not coherent.
-+	 */
-+	ppe->base = base;
-+	ppe->dev = dev;
-+	ppe->version = version;
-+
-+	foe = dmam_alloc_coherent(ppe->dev, MTK_PPE_ENTRIES * sizeof(*foe),
-+				  &ppe->foe_phys, GFP_KERNEL);
-+	if (!foe)
-+		return -ENOMEM;
-+
-+	ppe->foe_table = foe;
-+
-+	mtk_ppe_debugfs_init(ppe);
-+
-+	return 0;
-+}
-+
-+static void mtk_ppe_init_foe_table(struct mtk_ppe *ppe)
-+{
-+	static const u8 skip[] = { 12, 25, 38, 51, 76, 89, 102 };
-+	int i, k;
-+
-+	memset(ppe->foe_table, 0, MTK_PPE_ENTRIES * sizeof(ppe->foe_table));
-+
-+	if (!IS_ENABLED(CONFIG_SOC_MT7621))
-+		return;
-+
-+	/* skip all entries that cross the 1024 byte boundary */
-+	for (i = 0; i < MTK_PPE_ENTRIES; i += 128)
-+		for (k = 0; k < ARRAY_SIZE(skip); k++)
-+			ppe->foe_table[i + skip[k]].ib1 |= MTK_FOE_IB1_STATIC;
-+}
-+
-+int mtk_ppe_start(struct mtk_ppe *ppe)
-+{
-+	u32 val;
-+
-+	mtk_ppe_init_foe_table(ppe);
-+	ppe_w32(ppe, MTK_PPE_TB_BASE, ppe->foe_phys);
-+
-+	val = MTK_PPE_TB_CFG_ENTRY_80B |
-+	      MTK_PPE_TB_CFG_AGE_NON_L4 |
-+	      MTK_PPE_TB_CFG_AGE_UNBIND |
-+	      MTK_PPE_TB_CFG_AGE_TCP |
-+	      MTK_PPE_TB_CFG_AGE_UDP |
-+	      MTK_PPE_TB_CFG_AGE_TCP_FIN |
-+	      FIELD_PREP(MTK_PPE_TB_CFG_SEARCH_MISS,
-+			 MTK_PPE_SEARCH_MISS_ACTION_FORWARD_BUILD) |
-+	      FIELD_PREP(MTK_PPE_TB_CFG_KEEPALIVE,
-+			 MTK_PPE_KEEPALIVE_DISABLE) |
-+	      FIELD_PREP(MTK_PPE_TB_CFG_HASH_MODE, 1) |
-+	      FIELD_PREP(MTK_PPE_TB_CFG_SCAN_MODE,
-+			 MTK_PPE_SCAN_MODE_KEEPALIVE_AGE) |
-+	      FIELD_PREP(MTK_PPE_TB_CFG_ENTRY_NUM,
-+			 MTK_PPE_ENTRIES_SHIFT);
-+	ppe_w32(ppe, MTK_PPE_TB_CFG, val);
-+
-+	ppe_w32(ppe, MTK_PPE_IP_PROTO_CHK,
-+		MTK_PPE_IP_PROTO_CHK_IPV4 | MTK_PPE_IP_PROTO_CHK_IPV6);
-+
-+	mtk_ppe_cache_enable(ppe, true);
-+
-+	val = MTK_PPE_FLOW_CFG_IP4_TCP_FRAG |
-+	      MTK_PPE_FLOW_CFG_IP4_UDP_FRAG |
-+	      MTK_PPE_FLOW_CFG_IP6_3T_ROUTE |
-+	      MTK_PPE_FLOW_CFG_IP6_5T_ROUTE |
-+	      MTK_PPE_FLOW_CFG_IP6_6RD |
-+	      MTK_PPE_FLOW_CFG_IP4_NAT |
-+	      MTK_PPE_FLOW_CFG_IP4_NAPT |
-+	      MTK_PPE_FLOW_CFG_IP4_DSLITE |
-+	      MTK_PPE_FLOW_CFG_L2_BRIDGE |
-+	      MTK_PPE_FLOW_CFG_IP4_NAT_FRAG;
-+	ppe_w32(ppe, MTK_PPE_FLOW_CFG, val);
-+
-+	val = FIELD_PREP(MTK_PPE_UNBIND_AGE_MIN_PACKETS, 1000) |
-+	      FIELD_PREP(MTK_PPE_UNBIND_AGE_DELTA, 3);
-+	ppe_w32(ppe, MTK_PPE_UNBIND_AGE, val);
-+
-+	val = FIELD_PREP(MTK_PPE_BIND_AGE0_DELTA_UDP, 12) |
-+	      FIELD_PREP(MTK_PPE_BIND_AGE0_DELTA_NON_L4, 1);
-+	ppe_w32(ppe, MTK_PPE_BIND_AGE0, val);
-+
-+	val = FIELD_PREP(MTK_PPE_BIND_AGE1_DELTA_TCP_FIN, 1) |
-+	      FIELD_PREP(MTK_PPE_BIND_AGE1_DELTA_TCP, 7);
-+	ppe_w32(ppe, MTK_PPE_BIND_AGE1, val);
-+
-+	val = MTK_PPE_BIND_LIMIT0_QUARTER | MTK_PPE_BIND_LIMIT0_HALF;
-+	ppe_w32(ppe, MTK_PPE_BIND_LIMIT0, val);
-+
-+	val = MTK_PPE_BIND_LIMIT1_FULL |
-+	      FIELD_PREP(MTK_PPE_BIND_LIMIT1_NON_L4, 1);
-+	ppe_w32(ppe, MTK_PPE_BIND_LIMIT1, val);
-+
-+	val = FIELD_PREP(MTK_PPE_BIND_RATE_BIND, 30) |
-+	      FIELD_PREP(MTK_PPE_BIND_RATE_PREBIND, 1);
-+	ppe_w32(ppe, MTK_PPE_BIND_RATE, val);
-+
-+	/* enable PPE */
-+	val = MTK_PPE_GLO_CFG_EN |
-+	      MTK_PPE_GLO_CFG_IP4_L4_CS_DROP |
-+	      MTK_PPE_GLO_CFG_IP4_CS_DROP |
-+	      MTK_PPE_GLO_CFG_FLOW_DROP_UPDATE;
-+	ppe_w32(ppe, MTK_PPE_GLO_CFG, val);
-+
-+	ppe_w32(ppe, MTK_PPE_DEFAULT_CPU_PORT, 0);
-+
-+	return 0;
-+}
-+
-+int mtk_ppe_stop(struct mtk_ppe *ppe)
-+{
-+	u32 val;
-+	int i;
-+
-+	for (i = 0; i < MTK_PPE_ENTRIES; i++)
-+		ppe->foe_table[i].ib1 = FIELD_PREP(MTK_FOE_IB1_STATE,
-+						   MTK_FOE_STATE_INVALID);
-+
-+	mtk_ppe_cache_enable(ppe, false);
-+
-+	/* disable offload engine */
-+	ppe_clear(ppe, MTK_PPE_GLO_CFG, MTK_PPE_GLO_CFG_EN);
-+	ppe_w32(ppe, MTK_PPE_FLOW_CFG, 0);
-+
-+	/* disable aging */
-+	val = MTK_PPE_TB_CFG_AGE_NON_L4 |
-+	      MTK_PPE_TB_CFG_AGE_UNBIND |
-+	      MTK_PPE_TB_CFG_AGE_TCP |
-+	      MTK_PPE_TB_CFG_AGE_UDP |
-+	      MTK_PPE_TB_CFG_AGE_TCP_FIN;
-+	ppe_clear(ppe, MTK_PPE_TB_CFG, val);
-+
-+	return mtk_ppe_wait_busy(ppe);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -0,0 +1,287 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2020 Felix Fietkau <nbd@nbd.name> */
-+
-+#ifndef __MTK_PPE_H
-+#define __MTK_PPE_H
-+
-+#include <linux/kernel.h>
-+#include <linux/bitfield.h>
-+
-+#define MTK_ETH_PPE_BASE		0xc00
-+
-+#define MTK_PPE_ENTRIES_SHIFT		3
-+#define MTK_PPE_ENTRIES			(1024 << MTK_PPE_ENTRIES_SHIFT)
-+#define MTK_PPE_HASH_MASK		(MTK_PPE_ENTRIES - 1)
-+
-+#define MTK_FOE_IB1_UNBIND_TIMESTAMP	GENMASK(7, 0)
-+#define MTK_FOE_IB1_UNBIND_PACKETS	GENMASK(23, 8)
-+#define MTK_FOE_IB1_UNBIND_PREBIND	BIT(24)
-+
-+#define MTK_FOE_IB1_BIND_TIMESTAMP	GENMASK(14, 0)
-+#define MTK_FOE_IB1_BIND_KEEPALIVE	BIT(15)
-+#define MTK_FOE_IB1_BIND_VLAN_LAYER	GENMASK(18, 16)
-+#define MTK_FOE_IB1_BIND_PPPOE		BIT(19)
-+#define MTK_FOE_IB1_BIND_VLAN_TAG	BIT(20)
-+#define MTK_FOE_IB1_BIND_PKT_SAMPLE	BIT(21)
-+#define MTK_FOE_IB1_BIND_CACHE		BIT(22)
-+#define MTK_FOE_IB1_BIND_TUNNEL_DECAP	BIT(23)
-+#define MTK_FOE_IB1_BIND_TTL		BIT(24)
-+
-+#define MTK_FOE_IB1_PACKET_TYPE		GENMASK(27, 25)
-+#define MTK_FOE_IB1_STATE		GENMASK(29, 28)
-+#define MTK_FOE_IB1_UDP			BIT(30)
-+#define MTK_FOE_IB1_STATIC		BIT(31)
-+
-+enum {
-+	MTK_PPE_PKT_TYPE_IPV4_HNAPT = 0,
-+	MTK_PPE_PKT_TYPE_IPV4_ROUTE = 1,
-+	MTK_PPE_PKT_TYPE_BRIDGE = 2,
-+	MTK_PPE_PKT_TYPE_IPV4_DSLITE = 3,
-+	MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T = 4,
-+	MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T = 5,
-+	MTK_PPE_PKT_TYPE_IPV6_6RD = 7,
-+};
-+
-+#define MTK_FOE_IB2_QID			GENMASK(3, 0)
-+#define MTK_FOE_IB2_PSE_QOS		BIT(4)
-+#define MTK_FOE_IB2_DEST_PORT		GENMASK(7, 5)
-+#define MTK_FOE_IB2_MULTICAST		BIT(8)
-+
-+#define MTK_FOE_IB2_WHNAT_QID2		GENMASK(13, 12)
-+#define MTK_FOE_IB2_WHNAT_DEVIDX	BIT(16)
-+#define MTK_FOE_IB2_WHNAT_NAT		BIT(17)
-+
-+#define MTK_FOE_IB2_PORT_MG		GENMASK(17, 12)
-+
-+#define MTK_FOE_IB2_PORT_AG		GENMASK(23, 18)
-+
-+#define MTK_FOE_IB2_DSCP		GENMASK(31, 24)
-+
-+#define MTK_FOE_VLAN2_WHNAT_BSS		GEMMASK(5, 0)
-+#define MTK_FOE_VLAN2_WHNAT_WCID	GENMASK(13, 6)
-+#define MTK_FOE_VLAN2_WHNAT_RING	GENMASK(15, 14)
-+
-+enum {
-+	MTK_FOE_STATE_INVALID,
-+	MTK_FOE_STATE_UNBIND,
-+	MTK_FOE_STATE_BIND,
-+	MTK_FOE_STATE_FIN
-+};
-+
-+struct mtk_foe_mac_info {
-+	u16 vlan1;
-+	u16 etype;
-+
-+	u32 dest_mac_hi;
-+
-+	u16 vlan2;
-+	u16 dest_mac_lo;
-+
-+	u32 src_mac_hi;
-+
-+	u16 pppoe_id;
-+	u16 src_mac_lo;
-+};
-+
-+struct mtk_foe_bridge {
-+	u32 dest_mac_hi;
-+
-+	u16 src_mac_lo;
-+	u16 dest_mac_lo;
-+
-+	u32 src_mac_hi;
-+
-+	u32 ib2;
-+
-+	u32 _rsv[5];
-+
-+	u32 udf_tsid;
-+	struct mtk_foe_mac_info l2;
-+};
-+
-+struct mtk_ipv4_tuple {
-+	u32 src_ip;
-+	u32 dest_ip;
-+	union {
-+		struct {
-+			u16 dest_port;
-+			u16 src_port;
-+		};
-+		struct {
-+			u8 protocol;
-+			u8 _pad[3]; /* fill with 0xa5a5a5 */
-+		};
-+		u32 ports;
-+	};
-+};
-+
-+struct mtk_foe_ipv4 {
-+	struct mtk_ipv4_tuple orig;
-+
-+	u32 ib2;
-+
-+	struct mtk_ipv4_tuple new;
-+
-+	u16 timestamp;
-+	u16 _rsv0[3];
-+
-+	u32 udf_tsid;
-+
-+	struct mtk_foe_mac_info l2;
-+};
-+
-+struct mtk_foe_ipv4_dslite {
-+	struct mtk_ipv4_tuple ip4;
-+
-+	u32 tunnel_src_ip[4];
-+	u32 tunnel_dest_ip[4];
-+
-+	u8 flow_label[3];
-+	u8 priority;
-+
-+	u32 udf_tsid;
-+
-+	u32 ib2;
-+
-+	struct mtk_foe_mac_info l2;
-+};
-+
-+struct mtk_foe_ipv6 {
-+	u32 src_ip[4];
-+	u32 dest_ip[4];
-+
-+	union {
-+		struct {
-+			u8 protocol;
-+			u8 _pad[3]; /* fill with 0xa5a5a5 */
-+		}; /* 3-tuple */
-+		struct {
-+			u16 dest_port;
-+			u16 src_port;
-+		}; /* 5-tuple */
-+		u32 ports;
-+	};
-+
-+	u32 _rsv[3];
-+
-+	u32 udf;
-+
-+	u32 ib2;
-+	struct mtk_foe_mac_info l2;
-+};
-+
-+struct mtk_foe_ipv6_6rd {
-+	u32 src_ip[4];
-+	u32 dest_ip[4];
-+	u16 dest_port;
-+	u16 src_port;
-+
-+	u32 tunnel_src_ip;
-+	u32 tunnel_dest_ip;
-+
-+	u16 hdr_csum;
-+	u8 dscp;
-+	u8 ttl;
-+
-+	u8 flag;
-+	u8 pad;
-+	u8 per_flow_6rd_id;
-+	u8 pad2;
-+
-+	u32 ib2;
-+	struct mtk_foe_mac_info l2;
-+};
-+
-+struct mtk_foe_entry {
-+	u32 ib1;
-+
-+	union {
-+		struct mtk_foe_bridge bridge;
-+		struct mtk_foe_ipv4 ipv4;
-+		struct mtk_foe_ipv4_dslite dslite;
-+		struct mtk_foe_ipv6 ipv6;
-+		struct mtk_foe_ipv6_6rd ipv6_6rd;
-+		u32 data[19];
-+	};
-+};
-+
-+enum {
-+	MTK_PPE_CPU_REASON_TTL_EXCEEDED			= 0x02,
-+	MTK_PPE_CPU_REASON_OPTION_HEADER		= 0x03,
-+	MTK_PPE_CPU_REASON_NO_FLOW			= 0x07,
-+	MTK_PPE_CPU_REASON_IPV4_FRAG			= 0x08,
-+	MTK_PPE_CPU_REASON_IPV4_DSLITE_FRAG		= 0x09,
-+	MTK_PPE_CPU_REASON_IPV4_DSLITE_NO_TCP_UDP	= 0x0a,
-+	MTK_PPE_CPU_REASON_IPV6_6RD_NO_TCP_UDP		= 0x0b,
-+	MTK_PPE_CPU_REASON_TCP_FIN_SYN_RST		= 0x0c,
-+	MTK_PPE_CPU_REASON_UN_HIT			= 0x0d,
-+	MTK_PPE_CPU_REASON_HIT_UNBIND			= 0x0e,
-+	MTK_PPE_CPU_REASON_HIT_UNBIND_RATE_REACHED	= 0x0f,
-+	MTK_PPE_CPU_REASON_HIT_BIND_TCP_FIN		= 0x10,
-+	MTK_PPE_CPU_REASON_HIT_TTL_1			= 0x11,
-+	MTK_PPE_CPU_REASON_HIT_BIND_VLAN_VIOLATION	= 0x12,
-+	MTK_PPE_CPU_REASON_KEEPALIVE_UC_OLD_HDR		= 0x13,
-+	MTK_PPE_CPU_REASON_KEEPALIVE_MC_NEW_HDR		= 0x14,
-+	MTK_PPE_CPU_REASON_KEEPALIVE_DUP_OLD_HDR	= 0x15,
-+	MTK_PPE_CPU_REASON_HIT_BIND_FORCE_CPU		= 0x16,
-+	MTK_PPE_CPU_REASON_TUNNEL_OPTION_HEADER		= 0x17,
-+	MTK_PPE_CPU_REASON_MULTICAST_TO_CPU		= 0x18,
-+	MTK_PPE_CPU_REASON_MULTICAST_TO_GMAC1_CPU	= 0x19,
-+	MTK_PPE_CPU_REASON_HIT_PRE_BIND			= 0x1a,
-+	MTK_PPE_CPU_REASON_PACKET_SAMPLING		= 0x1b,
-+	MTK_PPE_CPU_REASON_EXCEED_MTU			= 0x1c,
-+	MTK_PPE_CPU_REASON_PPE_BYPASS			= 0x1e,
-+	MTK_PPE_CPU_REASON_INVALID			= 0x1f,
-+};
-+
-+struct mtk_ppe {
-+	struct device *dev;
-+	void __iomem *base;
-+	int version;
-+
-+	struct mtk_foe_entry *foe_table;
-+	dma_addr_t foe_phys;
-+
-+	void *acct_table;
-+};
-+
-+int mtk_ppe_init(struct mtk_ppe *ppe, struct device *dev, void __iomem *base,
-+		 int version);
-+int mtk_ppe_start(struct mtk_ppe *ppe);
-+int mtk_ppe_stop(struct mtk_ppe *ppe);
-+
-+static inline void
-+mtk_foe_entry_clear(struct mtk_ppe *ppe, u16 hash)
-+{
-+	ppe->foe_table[hash].ib1 = 0;
-+	dma_wmb();
-+}
-+
-+static inline int
-+mtk_foe_entry_timestamp(struct mtk_ppe *ppe, u16 hash)
-+{
-+	u32 ib1 = READ_ONCE(ppe->foe_table[hash].ib1);
-+
-+	if (FIELD_GET(MTK_FOE_IB1_STATE, ib1) != MTK_FOE_STATE_BIND)
-+		return -1;
-+
-+	return FIELD_GET(MTK_FOE_IB1_BIND_TIMESTAMP, ib1);
-+}
-+
-+int mtk_foe_entry_prepare(struct mtk_foe_entry *entry, int type, int l4proto,
-+			  u8 pse_port, u8 *src_mac, u8 *dest_mac);
-+int mtk_foe_entry_set_pse_port(struct mtk_foe_entry *entry, u8 port);
-+int mtk_foe_entry_set_ipv4_tuple(struct mtk_foe_entry *entry, bool orig,
-+				 __be32 src_addr, __be16 src_port,
-+				 __be32 dest_addr, __be16 dest_port);
-+int mtk_foe_entry_set_ipv6_tuple(struct mtk_foe_entry *entry,
-+				 __be32 *src_addr, __be16 src_port,
-+				 __be32 *dest_addr, __be16 dest_port);
-+int mtk_foe_entry_set_dsa(struct mtk_foe_entry *entry, int port);
-+int mtk_foe_entry_set_vlan(struct mtk_foe_entry *entry, int vid);
-+int mtk_foe_entry_set_pppoe(struct mtk_foe_entry *entry, int sid);
-+int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_foe_entry *entry,
-+			 u16 timestamp);
-+int mtk_ppe_debugfs_init(struct mtk_ppe *ppe);
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
-@@ -0,0 +1,217 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2020 Felix Fietkau <nbd@nbd.name> */
-+
-+#include <linux/kernel.h>
-+#include <linux/debugfs.h>
-+#include "mtk_eth_soc.h"
-+
-+struct mtk_flow_addr_info
-+{
-+	void *src, *dest;
-+	u16 *src_port, *dest_port;
-+	bool ipv6;
-+};
-+
-+static const char *mtk_foe_entry_state_str(int state)
-+{
-+	static const char * const state_str[] = {
-+		[MTK_FOE_STATE_INVALID] = "INV",
-+		[MTK_FOE_STATE_UNBIND] = "UNB",
-+		[MTK_FOE_STATE_BIND] = "BND",
-+		[MTK_FOE_STATE_FIN] = "FIN",
-+	};
-+
-+	if (state >= ARRAY_SIZE(state_str) || !state_str[state])
-+		return "UNK";
-+
-+	return state_str[state];
-+}
-+
-+static const char *mtk_foe_pkt_type_str(int type)
-+{
-+	static const char * const type_str[] = {
-+		[MTK_PPE_PKT_TYPE_IPV4_HNAPT] = "IPv4 5T",
-+		[MTK_PPE_PKT_TYPE_IPV4_ROUTE] = "IPv4 3T",
-+		[MTK_PPE_PKT_TYPE_BRIDGE] = "L2",
-+		[MTK_PPE_PKT_TYPE_IPV4_DSLITE] = "DS-LITE",
-+		[MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T] = "IPv6 3T",
-+		[MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T] = "IPv6 5T",
-+		[MTK_PPE_PKT_TYPE_IPV6_6RD] = "6RD",
-+	};
-+
-+	if (type >= ARRAY_SIZE(type_str) || !type_str[type])
-+		return "UNKNOWN";
-+
-+	return type_str[type];
-+}
-+
-+static void
-+mtk_print_addr(struct seq_file *m, u32 *addr, bool ipv6)
-+{
-+	u32 n_addr[4];
-+	int i;
-+
-+	if (!ipv6) {
-+		seq_printf(m, "%pI4h", addr);
-+		return;
-+	}
-+
-+	for (i = 0; i < ARRAY_SIZE(n_addr); i++)
-+		n_addr[i] = htonl(addr[i]);
-+	seq_printf(m, "%pI6", n_addr);
-+}
-+
-+static void
-+mtk_print_addr_info(struct seq_file *m, struct mtk_flow_addr_info *ai)
-+{
-+	mtk_print_addr(m, ai->src, ai->ipv6);
-+	if (ai->src_port)
-+		seq_printf(m, ":%d", *ai->src_port);
-+	seq_printf(m, "->");
-+	mtk_print_addr(m, ai->dest, ai->ipv6);
-+	if (ai->dest_port)
-+		seq_printf(m, ":%d", *ai->dest_port);
-+}
-+
-+static int
-+mtk_ppe_debugfs_foe_show(struct seq_file *m, void *private, bool bind)
-+{
-+	struct mtk_ppe *ppe = m->private;
-+	int i, count;
-+
-+	for (i = 0, count = 0; i < MTK_PPE_ENTRIES; i++) {
-+		struct mtk_foe_entry *entry = &ppe->foe_table[i];
-+		struct mtk_foe_mac_info *l2;
-+		struct mtk_flow_addr_info ai = {};
-+		unsigned char h_source[ETH_ALEN];
-+		unsigned char h_dest[ETH_ALEN];
-+		int type, state;
-+		u32 ib2;
-+
-+
-+		state = FIELD_GET(MTK_FOE_IB1_STATE, entry->ib1);
-+		if (!state)
-+			continue;
-+
-+		if (bind && state != MTK_FOE_STATE_BIND)
-+			continue;
-+
-+		type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
-+		seq_printf(m, "%05x %s %7s", i,
-+			   mtk_foe_entry_state_str(state),
-+			   mtk_foe_pkt_type_str(type));
-+
-+		switch (type) {
-+		case MTK_PPE_PKT_TYPE_IPV4_HNAPT:
-+		case MTK_PPE_PKT_TYPE_IPV4_DSLITE:
-+			ai.src_port = &entry->ipv4.orig.src_port;
-+			ai.dest_port = &entry->ipv4.orig.dest_port;
-+			fallthrough;
-+		case MTK_PPE_PKT_TYPE_IPV4_ROUTE:
-+			ai.src = &entry->ipv4.orig.src_ip;
-+			ai.dest = &entry->ipv4.orig.dest_ip;
-+			break;
-+		case MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T:
-+			ai.src_port = &entry->ipv6.src_port;
-+			ai.dest_port = &entry->ipv6.dest_port;
-+			fallthrough;
-+		case MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T:
-+		case MTK_PPE_PKT_TYPE_IPV6_6RD:
-+			ai.src = &entry->ipv6.src_ip;
-+			ai.dest = &entry->ipv6.dest_ip;
-+			ai.ipv6 = true;
-+			break;
-+		}
-+
-+		seq_printf(m, " orig=");
-+		mtk_print_addr_info(m, &ai);
-+
-+		switch (type) {
-+		case MTK_PPE_PKT_TYPE_IPV4_HNAPT:
-+		case MTK_PPE_PKT_TYPE_IPV4_DSLITE:
-+			ai.src_port = &entry->ipv4.new.src_port;
-+			ai.dest_port = &entry->ipv4.new.dest_port;
-+			fallthrough;
-+		case MTK_PPE_PKT_TYPE_IPV4_ROUTE:
-+			ai.src = &entry->ipv4.new.src_ip;
-+			ai.dest = &entry->ipv4.new.dest_ip;
-+			seq_printf(m, " new=");
-+			mtk_print_addr_info(m, &ai);
-+			break;
-+		}
-+
-+		if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE) {
-+			l2 = &entry->ipv6.l2;
-+			ib2 = entry->ipv6.ib2;
-+		} else {
-+			l2 = &entry->ipv4.l2;
-+			ib2 = entry->ipv4.ib2;
-+		}
-+
-+		*((__be32 *)h_source) = htonl(l2->src_mac_hi);
-+		*((__be16 *)&h_source[4]) = htons(l2->src_mac_lo);
-+		*((__be32 *)h_dest) = htonl(l2->dest_mac_hi);
-+		*((__be16 *)&h_dest[4]) = htons(l2->dest_mac_lo);
-+
-+		seq_printf(m, " eth=%pM->%pM etype=%04x"
-+			      " vlan=%d,%d ib1=%08x ib2=%08x\n",
-+			   h_source, h_dest, ntohs(l2->etype),
-+			   l2->vlan1, l2->vlan2, entry->ib1, ib2);
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+mtk_ppe_debugfs_foe_show_all(struct seq_file *m, void *private)
-+{
-+	return mtk_ppe_debugfs_foe_show(m, private, false);
-+}
-+
-+static int
-+mtk_ppe_debugfs_foe_show_bind(struct seq_file *m, void *private)
-+{
-+	return mtk_ppe_debugfs_foe_show(m, private, true);
-+}
-+
-+static int
-+mtk_ppe_debugfs_foe_open_all(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, mtk_ppe_debugfs_foe_show_all,
-+			   inode->i_private);
-+}
-+
-+static int
-+mtk_ppe_debugfs_foe_open_bind(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, mtk_ppe_debugfs_foe_show_bind,
-+			   inode->i_private);
-+}
-+
-+int mtk_ppe_debugfs_init(struct mtk_ppe *ppe)
-+{
-+	static const struct file_operations fops_all = {
-+		.open = mtk_ppe_debugfs_foe_open_all,
-+		.read = seq_read,
-+		.llseek = seq_lseek,
-+		.release = single_release,
-+	};
-+
-+	static const struct file_operations fops_bind = {
-+		.open = mtk_ppe_debugfs_foe_open_bind,
-+		.read = seq_read,
-+		.llseek = seq_lseek,
-+		.release = single_release,
-+	};
-+
-+	struct dentry *root;
-+
-+	root = debugfs_create_dir("mtk_ppe", NULL);
-+	if (!root)
-+		return -ENOMEM;
-+
-+	debugfs_create_file("entries", S_IRUGO, root, ppe, &fops_all);
-+	debugfs_create_file("bind", S_IRUGO, root, ppe, &fops_bind);
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_regs.h
-@@ -0,0 +1,144 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2020 Felix Fietkau <nbd@nbd.name> */
-+
-+#ifndef __MTK_PPE_REGS_H
-+#define __MTK_PPE_REGS_H
-+
-+#define MTK_PPE_GLO_CFG				0x200
-+#define MTK_PPE_GLO_CFG_EN			BIT(0)
-+#define MTK_PPE_GLO_CFG_TSID_EN			BIT(1)
-+#define MTK_PPE_GLO_CFG_IP4_L4_CS_DROP		BIT(2)
-+#define MTK_PPE_GLO_CFG_IP4_CS_DROP		BIT(3)
-+#define MTK_PPE_GLO_CFG_TTL0_DROP		BIT(4)
-+#define MTK_PPE_GLO_CFG_PPE_BSWAP		BIT(5)
-+#define MTK_PPE_GLO_CFG_PSE_HASH_OFS		BIT(6)
-+#define MTK_PPE_GLO_CFG_MCAST_TB_EN		BIT(7)
-+#define MTK_PPE_GLO_CFG_FLOW_DROP_KA		BIT(8)
-+#define MTK_PPE_GLO_CFG_FLOW_DROP_UPDATE	BIT(9)
-+#define MTK_PPE_GLO_CFG_UDP_LITE_EN		BIT(10)
-+#define MTK_PPE_GLO_CFG_UDP_LEN_DROP		BIT(11)
-+#define MTK_PPE_GLO_CFG_MCAST_ENTRIES		GNEMASK(13, 12)
-+#define MTK_PPE_GLO_CFG_BUSY			BIT(31)
-+
-+#define MTK_PPE_FLOW_CFG			0x204
-+#define MTK_PPE_FLOW_CFG_IP4_TCP_FRAG		BIT(6)
-+#define MTK_PPE_FLOW_CFG_IP4_UDP_FRAG		BIT(7)
-+#define MTK_PPE_FLOW_CFG_IP6_3T_ROUTE		BIT(8)
-+#define MTK_PPE_FLOW_CFG_IP6_5T_ROUTE		BIT(9)
-+#define MTK_PPE_FLOW_CFG_IP6_6RD		BIT(10)
-+#define MTK_PPE_FLOW_CFG_IP4_NAT		BIT(12)
-+#define MTK_PPE_FLOW_CFG_IP4_NAPT		BIT(13)
-+#define MTK_PPE_FLOW_CFG_IP4_DSLITE		BIT(14)
-+#define MTK_PPE_FLOW_CFG_L2_BRIDGE		BIT(15)
-+#define MTK_PPE_FLOW_CFG_IP_PROTO_BLACKLIST	BIT(16)
-+#define MTK_PPE_FLOW_CFG_IP4_NAT_FRAG		BIT(17)
-+#define MTK_PPE_FLOW_CFG_IP4_HASH_FLOW_LABEL	BIT(18)
-+#define MTK_PPE_FLOW_CFG_IP4_HASH_GRE_KEY	BIT(19)
-+#define MTK_PPE_FLOW_CFG_IP6_HASH_GRE_KEY	BIT(20)
-+
-+#define MTK_PPE_IP_PROTO_CHK			0x208
-+#define MTK_PPE_IP_PROTO_CHK_IPV4		GENMASK(15, 0)
-+#define MTK_PPE_IP_PROTO_CHK_IPV6		GENMASK(31, 16)
-+
-+#define MTK_PPE_TB_CFG				0x21c
-+#define MTK_PPE_TB_CFG_ENTRY_NUM		GENMASK(2, 0)
-+#define MTK_PPE_TB_CFG_ENTRY_80B		BIT(3)
-+#define MTK_PPE_TB_CFG_SEARCH_MISS		GENMASK(5, 4)
-+#define MTK_PPE_TB_CFG_AGE_PREBIND		BIT(6)
-+#define MTK_PPE_TB_CFG_AGE_NON_L4		BIT(7)
-+#define MTK_PPE_TB_CFG_AGE_UNBIND		BIT(8)
-+#define MTK_PPE_TB_CFG_AGE_TCP			BIT(9)
-+#define MTK_PPE_TB_CFG_AGE_UDP			BIT(10)
-+#define MTK_PPE_TB_CFG_AGE_TCP_FIN		BIT(11)
-+#define MTK_PPE_TB_CFG_KEEPALIVE		GENMASK(13, 12)
-+#define MTK_PPE_TB_CFG_HASH_MODE		GENMASK(15, 14)
-+#define MTK_PPE_TB_CFG_SCAN_MODE		GENMASK(17, 16)
-+#define MTK_PPE_TB_CFG_HASH_DEBUG		GENMASK(19, 18)
-+
-+enum {
-+	MTK_PPE_SCAN_MODE_DISABLED,
-+	MTK_PPE_SCAN_MODE_CHECK_AGE,
-+	MTK_PPE_SCAN_MODE_KEEPALIVE_AGE,
-+};
-+
-+enum {
-+	MTK_PPE_KEEPALIVE_DISABLE,
-+	MTK_PPE_KEEPALIVE_UNICAST_CPU,
-+	MTK_PPE_KEEPALIVE_DUP_CPU = 3,
-+};
-+
-+enum {
-+	MTK_PPE_SEARCH_MISS_ACTION_DROP,
-+	MTK_PPE_SEARCH_MISS_ACTION_FORWARD = 2,
-+	MTK_PPE_SEARCH_MISS_ACTION_FORWARD_BUILD = 3,
-+};
-+
-+#define MTK_PPE_TB_BASE				0x220
-+
-+#define MTK_PPE_TB_USED				0x224
-+#define MTK_PPE_TB_USED_NUM			GENMASK(13, 0)
-+
-+#define MTK_PPE_BIND_RATE			0x228
-+#define MTK_PPE_BIND_RATE_BIND			GENMASK(15, 0)
-+#define MTK_PPE_BIND_RATE_PREBIND		GENMASK(31, 16)
-+
-+#define MTK_PPE_BIND_LIMIT0			0x22c
-+#define MTK_PPE_BIND_LIMIT0_QUARTER		GENMASK(13, 0)
-+#define MTK_PPE_BIND_LIMIT0_HALF		GENMASK(29, 16)
-+
-+#define MTK_PPE_BIND_LIMIT1			0x230
-+#define MTK_PPE_BIND_LIMIT1_FULL		GENMASK(13, 0)
-+#define MTK_PPE_BIND_LIMIT1_NON_L4		GENMASK(23, 16)
-+
-+#define MTK_PPE_KEEPALIVE			0x234
-+#define MTK_PPE_KEEPALIVE_TIME			GENMASK(15, 0)
-+#define MTK_PPE_KEEPALIVE_TIME_TCP		GENMASK(23, 16)
-+#define MTK_PPE_KEEPALIVE_TIME_UDP		GENMASK(31, 24)
-+
-+#define MTK_PPE_UNBIND_AGE			0x238
-+#define MTK_PPE_UNBIND_AGE_MIN_PACKETS		GENMASK(31, 16)
-+#define MTK_PPE_UNBIND_AGE_DELTA		GENMASK(7, 0)
-+
-+#define MTK_PPE_BIND_AGE0			0x23c
-+#define MTK_PPE_BIND_AGE0_DELTA_NON_L4		GENMASK(30, 16)
-+#define MTK_PPE_BIND_AGE0_DELTA_UDP		GENMASK(14, 0)
-+
-+#define MTK_PPE_BIND_AGE1			0x240
-+#define MTK_PPE_BIND_AGE1_DELTA_TCP_FIN		GENMASK(30, 16)
-+#define MTK_PPE_BIND_AGE1_DELTA_TCP		GENMASK(14, 0)
-+
-+#define MTK_PPE_HASH_SEED			0x244
-+
-+#define MTK_PPE_DEFAULT_CPU_PORT		0x248
-+#define MTK_PPE_DEFAULT_CPU_PORT_MASK(_n)	(GENMASK(2, 0) << ((_n) * 4))
-+
-+#define MTK_PPE_MTU_DROP			0x308
-+
-+#define MTK_PPE_VLAN_MTU0			0x30c
-+#define MTK_PPE_VLAN_MTU0_NONE			GENMASK(13, 0)
-+#define MTK_PPE_VLAN_MTU0_1TAG			GENMASK(29, 16)
-+
-+#define MTK_PPE_VLAN_MTU1			0x310
-+#define MTK_PPE_VLAN_MTU1_2TAG			GENMASK(13, 0)
-+#define MTK_PPE_VLAN_MTU1_3TAG			GENMASK(29, 16)
-+
-+#define MTK_PPE_VPM_TPID			0x318
-+
-+#define MTK_PPE_CACHE_CTL			0x320
-+#define MTK_PPE_CACHE_CTL_EN			BIT(0)
-+#define MTK_PPE_CACHE_CTL_LOCK_CLR		BIT(4)
-+#define MTK_PPE_CACHE_CTL_REQ			BIT(8)
-+#define MTK_PPE_CACHE_CTL_CLEAR			BIT(9)
-+#define MTK_PPE_CACHE_CTL_CMD			GENMASK(13, 12)
-+
-+#define MTK_PPE_MIB_CFG				0x334
-+#define MTK_PPE_MIB_CFG_EN			BIT(0)
-+#define MTK_PPE_MIB_CFG_RD_CLR			BIT(1)
-+
-+#define MTK_PPE_MIB_TB_BASE			0x338
-+
-+#define MTK_PPE_MIB_CACHE_CTL			0x350
-+#define MTK_PPE_MIB_CACHE_CTL_EN		BIT(0)
-+#define MTK_PPE_MIB_CACHE_CTL_FLUSH		BIT(2)
-+
-+#endif
diff --git a/target/linux/generic/backport-5.10/610-v5.13-33-net-ethernet-mtk_eth_soc-add-flow-offloading-support.patch b/target/linux/generic/backport-5.10/610-v5.13-33-net-ethernet-mtk_eth_soc-add-flow-offloading-support.patch
deleted file mode 100644
index b43417db4618..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-33-net-ethernet-mtk_eth_soc-add-flow-offloading-support.patch
+++ /dev/null
@@ -1,568 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 24 Mar 2021 02:30:54 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: add flow offloading support
-
-This adds support for offloading IPv4 routed flows, including SNAT/DNAT,
-one VLAN, PPPoE and DSA.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
- create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-
---- a/drivers/net/ethernet/mediatek/Makefile
-+++ b/drivers/net/ethernet/mediatek/Makefile
-@@ -4,5 +4,5 @@
- #
- 
- obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o
--mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o
-+mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o mtk_ppe_offload.o
- obj-$(CONFIG_NET_MEDIATEK_STAR_EMAC) += mtk_star_emac.o
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2859,6 +2859,7 @@ static const struct net_device_ops mtk_n
- #ifdef CONFIG_NET_POLL_CONTROLLER
- 	.ndo_poll_controller	= mtk_poll_controller,
- #endif
-+	.ndo_setup_tc		= mtk_eth_setup_tc,
- };
- 
- static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
-@@ -3117,6 +3118,10 @@ static int mtk_probe(struct platform_dev
- 				   eth->base + MTK_ETH_PPE_BASE, 2);
- 		if (err)
- 			goto err_free_dev;
-+
-+		err = mtk_eth_offload_init(eth);
-+		if (err)
-+			goto err_free_dev;
- 	}
- 
- 	for (i = 0; i < MTK_MAX_DEVS; i++) {
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -15,6 +15,7 @@
- #include <linux/u64_stats_sync.h>
- #include <linux/refcount.h>
- #include <linux/phylink.h>
-+#include <linux/rhashtable.h>
- #include "mtk_ppe.h"
- 
- #define MTK_QDMA_PAGE_SIZE	2048
-@@ -40,7 +41,8 @@
- 				 NETIF_F_HW_VLAN_CTAG_RX | \
- 				 NETIF_F_SG | NETIF_F_TSO | \
- 				 NETIF_F_TSO6 | \
--				 NETIF_F_IPV6_CSUM)
-+				 NETIF_F_IPV6_CSUM |\
-+				 NETIF_F_HW_TC)
- #define MTK_HW_FEATURES_MT7628	(NETIF_F_SG | NETIF_F_RXCSUM)
- #define NEXT_DESP_IDX(X, Y)	(((X) + 1) & ((Y) - 1))
- 
-@@ -930,6 +932,7 @@ struct mtk_eth {
- 	int				ip_align;
- 
- 	struct mtk_ppe			ppe;
-+	struct rhashtable		flow_table;
- };
- 
- /* struct mtk_mac -	the structure that holds the info about the MACs of the
-@@ -974,4 +977,9 @@ int mtk_gmac_sgmii_path_setup(struct mtk
- int mtk_gmac_gephy_path_setup(struct mtk_eth *eth, int mac_id);
- int mtk_gmac_rgmii_path_setup(struct mtk_eth *eth, int mac_id);
- 
-+int mtk_eth_offload_init(struct mtk_eth *eth);
-+int mtk_eth_setup_tc(struct net_device *dev, enum tc_setup_type type,
-+		     void *type_data);
-+
-+
- #endif /* MTK_ETH_H */
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -0,0 +1,485 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ *  Copyright (C) 2020 Felix Fietkau <nbd@nbd.name>
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/rhashtable.h>
-+#include <linux/if_ether.h>
-+#include <linux/ip.h>
-+#include <net/flow_offload.h>
-+#include <net/pkt_cls.h>
-+#include <net/dsa.h>
-+#include "mtk_eth_soc.h"
-+
-+struct mtk_flow_data {
-+	struct ethhdr eth;
-+
-+	union {
-+		struct {
-+			__be32 src_addr;
-+			__be32 dst_addr;
-+		} v4;
-+	};
-+
-+	__be16 src_port;
-+	__be16 dst_port;
-+
-+	struct {
-+		u16 id;
-+		__be16 proto;
-+		u8 num;
-+	} vlan;
-+	struct {
-+		u16 sid;
-+		u8 num;
-+	} pppoe;
-+};
-+
-+struct mtk_flow_entry {
-+	struct rhash_head node;
-+	unsigned long cookie;
-+	u16 hash;
-+};
-+
-+static const struct rhashtable_params mtk_flow_ht_params = {
-+	.head_offset = offsetof(struct mtk_flow_entry, node),
-+	.head_offset = offsetof(struct mtk_flow_entry, cookie),
-+	.key_len = sizeof(unsigned long),
-+	.automatic_shrinking = true,
-+};
-+
-+static u32
-+mtk_eth_timestamp(struct mtk_eth *eth)
-+{
-+	return mtk_r32(eth, 0x0010) & MTK_FOE_IB1_BIND_TIMESTAMP;
-+}
-+
-+static int
-+mtk_flow_set_ipv4_addr(struct mtk_foe_entry *foe, struct mtk_flow_data *data,
-+		       bool egress)
-+{
-+	return mtk_foe_entry_set_ipv4_tuple(foe, egress,
-+					    data->v4.src_addr, data->src_port,
-+					    data->v4.dst_addr, data->dst_port);
-+}
-+
-+static void
-+mtk_flow_offload_mangle_eth(const struct flow_action_entry *act, void *eth)
-+{
-+	void *dest = eth + act->mangle.offset;
-+	const void *src = &act->mangle.val;
-+
-+	if (act->mangle.offset > 8)
-+		return;
-+
-+	if (act->mangle.mask == 0xffff) {
-+		src += 2;
-+		dest += 2;
-+	}
-+
-+	memcpy(dest, src, act->mangle.mask ? 2 : 4);
-+}
-+
-+
-+static int
-+mtk_flow_mangle_ports(const struct flow_action_entry *act,
-+		      struct mtk_flow_data *data)
-+{
-+	u32 val = ntohl(act->mangle.val);
-+
-+	switch (act->mangle.offset) {
-+	case 0:
-+		if (act->mangle.mask == ~htonl(0xffff))
-+			data->dst_port = cpu_to_be16(val);
-+		else
-+			data->src_port = cpu_to_be16(val >> 16);
-+		break;
-+	case 2:
-+		data->dst_port = cpu_to_be16(val);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+mtk_flow_mangle_ipv4(const struct flow_action_entry *act,
-+		     struct mtk_flow_data *data)
-+{
-+	__be32 *dest;
-+
-+	switch (act->mangle.offset) {
-+	case offsetof(struct iphdr, saddr):
-+		dest = &data->v4.src_addr;
-+		break;
-+	case offsetof(struct iphdr, daddr):
-+		dest = &data->v4.dst_addr;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	memcpy(dest, &act->mangle.val, sizeof(u32));
-+
-+	return 0;
-+}
-+
-+static int
-+mtk_flow_get_dsa_port(struct net_device **dev)
-+{
-+#if IS_ENABLED(CONFIG_NET_DSA)
-+	struct dsa_port *dp;
-+
-+	dp = dsa_port_from_netdev(*dev);
-+	if (IS_ERR(dp))
-+		return -ENODEV;
-+
-+	if (dp->cpu_dp->tag_ops->proto != DSA_TAG_PROTO_MTK)
-+		return -ENODEV;
-+
-+	*dev = dp->cpu_dp->master;
-+
-+	return dp->index;
-+#else
-+	return -ENODEV;
-+#endif
-+}
-+
-+static int
-+mtk_flow_set_output_device(struct mtk_eth *eth, struct mtk_foe_entry *foe,
-+			   struct net_device *dev)
-+{
-+	int pse_port, dsa_port;
-+
-+	dsa_port = mtk_flow_get_dsa_port(&dev);
-+	if (dsa_port >= 0)
-+		mtk_foe_entry_set_dsa(foe, dsa_port);
-+
-+	if (dev == eth->netdev[0])
-+		pse_port = 1;
-+	else if (dev == eth->netdev[1])
-+		pse_port = 2;
-+	else
-+		return -EOPNOTSUPP;
-+
-+	mtk_foe_entry_set_pse_port(foe, pse_port);
-+
-+	return 0;
-+}
-+
-+static int
-+mtk_flow_offload_replace(struct mtk_eth *eth, struct flow_cls_offload *f)
-+{
-+	struct flow_rule *rule = flow_cls_offload_flow_rule(f);
-+	struct flow_action_entry *act;
-+	struct mtk_flow_data data = {};
-+	struct mtk_foe_entry foe;
-+	struct net_device *odev = NULL;
-+	struct mtk_flow_entry *entry;
-+	int offload_type = 0;
-+	u16 addr_type = 0;
-+	u32 timestamp;
-+	u8 l4proto = 0;
-+	int err = 0;
-+	int hash;
-+	int i;
-+
-+	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_META)) {
-+		struct flow_match_meta match;
-+
-+		flow_rule_match_meta(rule, &match);
-+	} else {
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_CONTROL)) {
-+		struct flow_match_control match;
-+
-+		flow_rule_match_control(rule, &match);
-+		addr_type = match.key->addr_type;
-+	} else {
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC)) {
-+		struct flow_match_basic match;
-+
-+		flow_rule_match_basic(rule, &match);
-+		l4proto = match.key->ip_proto;
-+	} else {
-+		return -EOPNOTSUPP;
-+	}
-+
-+	flow_action_for_each(i, act, &rule->action) {
-+		switch (act->id) {
-+		case FLOW_ACTION_MANGLE:
-+			if (act->mangle.htype == FLOW_ACT_MANGLE_HDR_TYPE_ETH)
-+				mtk_flow_offload_mangle_eth(act, &data.eth);
-+			break;
-+		case FLOW_ACTION_REDIRECT:
-+			odev = act->dev;
-+			break;
-+		case FLOW_ACTION_CSUM:
-+			break;
-+		case FLOW_ACTION_VLAN_PUSH:
-+			if (data.vlan.num == 1 ||
-+			    act->vlan.proto != htons(ETH_P_8021Q))
-+				return -EOPNOTSUPP;
-+
-+			data.vlan.id = act->vlan.vid;
-+			data.vlan.proto = act->vlan.proto;
-+			data.vlan.num++;
-+			break;
-+		case FLOW_ACTION_PPPOE_PUSH:
-+			if (data.pppoe.num == 1)
-+				return -EOPNOTSUPP;
-+
-+			data.pppoe.sid = act->pppoe.sid;
-+			data.pppoe.num++;
-+			break;
-+		default:
-+			return -EOPNOTSUPP;
-+		}
-+	}
-+
-+	switch (addr_type) {
-+	case FLOW_DISSECTOR_KEY_IPV4_ADDRS:
-+		offload_type = MTK_PPE_PKT_TYPE_IPV4_HNAPT;
-+		break;
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (!is_valid_ether_addr(data.eth.h_source) ||
-+	    !is_valid_ether_addr(data.eth.h_dest))
-+		return -EINVAL;
-+
-+	err = mtk_foe_entry_prepare(&foe, offload_type, l4proto, 0,
-+				    data.eth.h_source,
-+				    data.eth.h_dest);
-+	if (err)
-+		return err;
-+
-+	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_PORTS)) {
-+		struct flow_match_ports ports;
-+
-+		flow_rule_match_ports(rule, &ports);
-+		data.src_port = ports.key->src;
-+		data.dst_port = ports.key->dst;
-+	} else {
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (addr_type == FLOW_DISSECTOR_KEY_IPV4_ADDRS) {
-+		struct flow_match_ipv4_addrs addrs;
-+
-+		flow_rule_match_ipv4_addrs(rule, &addrs);
-+
-+		data.v4.src_addr = addrs.key->src;
-+		data.v4.dst_addr = addrs.key->dst;
-+
-+		mtk_flow_set_ipv4_addr(&foe, &data, false);
-+	}
-+
-+	flow_action_for_each(i, act, &rule->action) {
-+		if (act->id != FLOW_ACTION_MANGLE)
-+			continue;
-+
-+		switch (act->mangle.htype) {
-+		case FLOW_ACT_MANGLE_HDR_TYPE_TCP:
-+		case FLOW_ACT_MANGLE_HDR_TYPE_UDP:
-+			err = mtk_flow_mangle_ports(act, &data);
-+			break;
-+		case FLOW_ACT_MANGLE_HDR_TYPE_IP4:
-+			err = mtk_flow_mangle_ipv4(act, &data);
-+			break;
-+		case FLOW_ACT_MANGLE_HDR_TYPE_ETH:
-+			/* handled earlier */
-+			break;
-+		default:
-+			return -EOPNOTSUPP;
-+		}
-+
-+		if (err)
-+			return err;
-+	}
-+
-+	if (addr_type == FLOW_DISSECTOR_KEY_IPV4_ADDRS) {
-+		err = mtk_flow_set_ipv4_addr(&foe, &data, true);
-+		if (err)
-+			return err;
-+	}
-+
-+	if (data.vlan.num == 1) {
-+		if (data.vlan.proto != htons(ETH_P_8021Q))
-+			return -EOPNOTSUPP;
-+
-+		mtk_foe_entry_set_vlan(&foe, data.vlan.id);
-+	}
-+	if (data.pppoe.num == 1)
-+		mtk_foe_entry_set_pppoe(&foe, data.pppoe.sid);
-+
-+	err = mtk_flow_set_output_device(eth, &foe, odev);
-+	if (err)
-+		return err;
-+
-+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
-+	if (!entry)
-+		return -ENOMEM;
-+
-+	entry->cookie = f->cookie;
-+	timestamp = mtk_eth_timestamp(eth);
-+	hash = mtk_foe_entry_commit(&eth->ppe, &foe, timestamp);
-+	if (hash < 0) {
-+		err = hash;
-+		goto free;
-+	}
-+
-+	entry->hash = hash;
-+	err = rhashtable_insert_fast(&eth->flow_table, &entry->node,
-+				     mtk_flow_ht_params);
-+	if (err < 0)
-+		goto clear_flow;
-+
-+	return 0;
-+clear_flow:
-+	mtk_foe_entry_clear(&eth->ppe, hash);
-+free:
-+	kfree(entry);
-+	return err;
-+}
-+
-+static int
-+mtk_flow_offload_destroy(struct mtk_eth *eth, struct flow_cls_offload *f)
-+{
-+	struct mtk_flow_entry *entry;
-+
-+	entry = rhashtable_lookup(&eth->flow_table, &f->cookie,
-+				  mtk_flow_ht_params);
-+	if (!entry)
-+		return -ENOENT;
-+
-+	mtk_foe_entry_clear(&eth->ppe, entry->hash);
-+	rhashtable_remove_fast(&eth->flow_table, &entry->node,
-+			       mtk_flow_ht_params);
-+	kfree(entry);
-+
-+	return 0;
-+}
-+
-+static int
-+mtk_flow_offload_stats(struct mtk_eth *eth, struct flow_cls_offload *f)
-+{
-+	struct mtk_flow_entry *entry;
-+	int timestamp;
-+	u32 idle;
-+
-+	entry = rhashtable_lookup(&eth->flow_table, &f->cookie,
-+				  mtk_flow_ht_params);
-+	if (!entry)
-+		return -ENOENT;
-+
-+	timestamp = mtk_foe_entry_timestamp(&eth->ppe, entry->hash);
-+	if (timestamp < 0)
-+		return -ETIMEDOUT;
-+
-+	idle = mtk_eth_timestamp(eth) - timestamp;
-+	f->stats.lastused = jiffies - idle * HZ;
-+
-+	return 0;
-+}
-+
-+static int
-+mtk_eth_setup_tc_block_cb(enum tc_setup_type type, void *type_data, void *cb_priv)
-+{
-+	struct flow_cls_offload *cls = type_data;
-+	struct net_device *dev = cb_priv;
-+	struct mtk_mac *mac = netdev_priv(dev);
-+	struct mtk_eth *eth = mac->hw;
-+
-+	if (!tc_can_offload(dev))
-+		return -EOPNOTSUPP;
-+
-+	if (type != TC_SETUP_CLSFLOWER)
-+		return -EOPNOTSUPP;
-+
-+	switch (cls->command) {
-+	case FLOW_CLS_REPLACE:
-+		return mtk_flow_offload_replace(eth, cls);
-+	case FLOW_CLS_DESTROY:
-+		return mtk_flow_offload_destroy(eth, cls);
-+	case FLOW_CLS_STATS:
-+		return mtk_flow_offload_stats(eth, cls);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+mtk_eth_setup_tc_block(struct net_device *dev, struct flow_block_offload *f)
-+{
-+	struct mtk_mac *mac = netdev_priv(dev);
-+	struct mtk_eth *eth = mac->hw;
-+	static LIST_HEAD(block_cb_list);
-+	struct flow_block_cb *block_cb;
-+	flow_setup_cb_t *cb;
-+
-+	if (!eth->ppe.foe_table)
-+		return -EOPNOTSUPP;
-+
-+	if (f->binder_type != FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS)
-+		return -EOPNOTSUPP;
-+
-+	cb = mtk_eth_setup_tc_block_cb;
-+	f->driver_block_list = &block_cb_list;
-+
-+	switch (f->command) {
-+	case FLOW_BLOCK_BIND:
-+		block_cb = flow_block_cb_lookup(f->block, cb, dev);
-+		if (block_cb) {
-+			flow_block_cb_incref(block_cb);
-+			return 0;
-+		}
-+		block_cb = flow_block_cb_alloc(cb, dev, dev, NULL);
-+		if (IS_ERR(block_cb))
-+			return PTR_ERR(block_cb);
-+
-+		flow_block_cb_add(block_cb, f);
-+		list_add_tail(&block_cb->driver_list, &block_cb_list);
-+		return 0;
-+	case FLOW_BLOCK_UNBIND:
-+		block_cb = flow_block_cb_lookup(f->block, cb, dev);
-+		if (!block_cb)
-+			return -ENOENT;
-+
-+		if (flow_block_cb_decref(block_cb)) {
-+			flow_block_cb_remove(block_cb, f);
-+			list_del(&block_cb->driver_list);
-+		}
-+		return 0;
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+int mtk_eth_setup_tc(struct net_device *dev, enum tc_setup_type type,
-+		     void *type_data)
-+{
-+	if (type == TC_SETUP_FT)
-+		return mtk_eth_setup_tc_block(dev, type_data);
-+
-+	return -EOPNOTSUPP;
-+}
-+
-+int mtk_eth_offload_init(struct mtk_eth *eth)
-+{
-+	if (!eth->ppe.foe_table)
-+		return 0;
-+
-+	return rhashtable_init(&eth->flow_table, &mtk_flow_ht_params);
-+}
diff --git a/target/linux/generic/backport-5.10/610-v5.13-34-docs-nf_flowtable-update-documentation-with-enhancem.patch b/target/linux/generic/backport-5.10/610-v5.13-34-docs-nf_flowtable-update-documentation-with-enhancem.patch
deleted file mode 100644
index 2cea1ebe2422..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-34-docs-nf_flowtable-update-documentation-with-enhancem.patch
+++ /dev/null
@@ -1,236 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Wed, 24 Mar 2021 02:30:55 +0100
-Subject: [PATCH] docs: nf_flowtable: update documentation with
- enhancements
-
-This patch updates the flowtable documentation to describe recent
-enhancements:
-
-- Offload action is available after the first packets go through the
-  classic forwarding path.
-- IPv4 and IPv6 are supported. Only TCP and UDP layer 4 are supported at
-  this stage.
-- Tuple has been augmented to track VLAN id and PPPoE session id.
-- Bridge and IP forwarding integration, including bridge VLAN filtering
-  support.
-- Hardware offload support.
-- Describe the [OFFLOAD] and [HW_OFFLOAD] tags in the conntrack table
-  listing.
-- Replace 'flow offload' by 'flow add' in example rulesets (preferred
-  syntax).
-- Describe existing cache limitations.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/Documentation/networking/nf_flowtable.rst
-+++ b/Documentation/networking/nf_flowtable.rst
-@@ -4,35 +4,38 @@
- Netfilter's flowtable infrastructure
- ====================================
- 
--This documentation describes the software flowtable infrastructure available in
--Netfilter since Linux kernel 4.16.
-+This documentation describes the Netfilter flowtable infrastructure which allows
-+you to define a fastpath through the flowtable datapath. This infrastructure
-+also provides hardware offload support. The flowtable supports for the layer 3
-+IPv4 and IPv6 and the layer 4 TCP and UDP protocols.
- 
- Overview
- --------
- 
--Initial packets follow the classic forwarding path, once the flow enters the
--established state according to the conntrack semantics (ie. we have seen traffic
--in both directions), then you can decide to offload the flow to the flowtable
--from the forward chain via the 'flow offload' action available in nftables.
--
--Packets that find an entry in the flowtable (ie. flowtable hit) are sent to the
--output netdevice via neigh_xmit(), hence, they bypass the classic forwarding
--path (the visible effect is that you do not see these packets from any of the
--netfilter hooks coming after the ingress). In case of flowtable miss, the packet
--follows the classic forward path.
--
--The flowtable uses a resizable hashtable, lookups are based on the following
--7-tuple selectors: source, destination, layer 3 and layer 4 protocols, source
--and destination ports and the input interface (useful in case there are several
--conntrack zones in place).
--
--Flowtables are populated via the 'flow offload' nftables action, so the user can
--selectively specify what flows are placed into the flow table. Hence, packets
--follow the classic forwarding path unless the user explicitly instruct packets
--to use this new alternative forwarding path via nftables policy.
-+Once the first packet of the flow successfully goes through the IP forwarding
-+path, from the second packet on, you might decide to offload the flow to the
-+flowtable through your ruleset. The flowtable infrastructure provides a rule
-+action that allows you to specify when to add a flow to the flowtable.
-+
-+A packet that finds a matching entry in the flowtable (ie. flowtable hit) is
-+transmitted to the output netdevice via neigh_xmit(), hence, packets bypass the
-+classic IP forwarding path (the visible effect is that you do not see these
-+packets from any of the Netfilter hooks coming after ingress). In case that
-+there is no matching entry in the flowtable (ie. flowtable miss), the packet
-+follows the classic IP forwarding path.
-+
-+The flowtable uses a resizable hashtable. Lookups are based on the following
-+n-tuple selectors: layer 2 protocol encapsulation (VLAN and PPPoE), layer 3
-+source and destination, layer 4 source and destination ports and the input
-+interface (useful in case there are several conntrack zones in place).
-+
-+The 'flow add' action allows you to populate the flowtable, the user selectively
-+specifies what flows are placed into the flowtable. Hence, packets follow the
-+classic IP forwarding path unless the user explicitly instruct flows to use this
-+new alternative forwarding path via policy.
- 
--This is represented in Fig.1, which describes the classic forwarding path
--including the Netfilter hooks and the flowtable fastpath bypass.
-+The flowtable datapath is represented in Fig.1, which describes the classic IP
-+forwarding path including the Netfilter hooks and the flowtable fastpath bypass.
- 
- ::
- 
-@@ -67,11 +70,13 @@ including the Netfilter hooks and the fl
- 	       Fig.1 Netfilter hooks and flowtable interactions
- 
- The flowtable entry also stores the NAT configuration, so all packets are
--mangled according to the NAT policy that matches the initial packets that went
--through the classic forwarding path. The TTL is decremented before calling
--neigh_xmit(). Fragmented traffic is passed up to follow the classic forwarding
--path given that the transport selectors are missing, therefore flowtable lookup
--is not possible.
-+mangled according to the NAT policy that is specified from the classic IP
-+forwarding path. The TTL is decremented before calling neigh_xmit(). Fragmented
-+traffic is passed up to follow the classic IP forwarding path given that the
-+transport header is missing, in this case, flowtable lookups are not possible.
-+TCP RST and FIN packets are also passed up to the classic IP forwarding path to
-+release the flow gracefully. Packets that exceed the MTU are also passed up to
-+the classic forwarding path to report packet-too-big ICMP errors to the sender.
- 
- Example configuration
- ---------------------
-@@ -85,7 +90,7 @@ flowtable and add one rule to your forwa
- 		}
- 		chain y {
- 			type filter hook forward priority 0; policy accept;
--			ip protocol tcp flow offload @f
-+			ip protocol tcp flow add @f
- 			counter packets 0 bytes 0
- 		}
- 	}
-@@ -103,6 +108,117 @@ flow is offloaded, you will observe that
- does not get updated for the packets that are being forwarded through the
- forwarding bypass.
- 
-+You can identify offloaded flows through the [OFFLOAD] tag when listing your
-+connection tracking table.
-+
-+::
-+	# conntrack -L
-+	tcp      6 src=10.141.10.2 dst=192.168.10.2 sport=52728 dport=5201 src=192.168.10.2 dst=192.168.10.1 sport=5201 dport=52728 [OFFLOAD] mark=0 use=2
-+
-+
-+Layer 2 encapsulation
-+---------------------
-+
-+Since Linux kernel 5.13, the flowtable infrastructure discovers the real
-+netdevice behind VLAN and PPPoE netdevices. The flowtable software datapath
-+parses the VLAN and PPPoE layer 2 headers to extract the ethertype and the
-+VLAN ID / PPPoE session ID which are used for the flowtable lookups. The
-+flowtable datapath also deals with layer 2 decapsulation.
-+
-+You do not need to add the PPPoE and the VLAN devices to your flowtable,
-+instead the real device is sufficient for the flowtable to track your flows.
-+
-+Bridge and IP forwarding
-+------------------------
-+
-+Since Linux kernel 5.13, you can add bridge ports to the flowtable. The
-+flowtable infrastructure discovers the topology behind the bridge device. This
-+allows the flowtable to define a fastpath bypass between the bridge ports
-+(represented as eth1 and eth2 in the example figure below) and the gateway
-+device (represented as eth0) in your switch/router.
-+
-+::
-+                      fastpath bypass
-+               .-------------------------.
-+              /                           \
-+              |           IP forwarding   |
-+              |          /             \ \/
-+              |       br0               eth0 ..... eth0
-+              .       / \                          *host B*
-+               -> eth1  eth2
-+                   .           *switch/router*
-+                   .
-+                   .
-+                 eth0
-+               *host A*
-+
-+The flowtable infrastructure also supports for bridge VLAN filtering actions
-+such as PVID and untagged. You can also stack a classic VLAN device on top of
-+your bridge port.
-+
-+If you would like that your flowtable defines a fastpath between your bridge
-+ports and your IP forwarding path, you have to add your bridge ports (as
-+represented by the real netdevice) to your flowtable definition.
-+
-+Counters
-+--------
-+
-+The flowtable can synchronize packet and byte counters with the existing
-+connection tracking entry by specifying the counter statement in your flowtable
-+definition, e.g.
-+
-+::
-+	table inet x {
-+		flowtable f {
-+			hook ingress priority 0; devices = { eth0, eth1 };
-+			counter
-+		}
-+		...
-+	}
-+
-+Counter support is available since Linux kernel 5.7.
-+
-+Hardware offload
-+----------------
-+
-+If your network device provides hardware offload support, you can turn it on by
-+means of the 'offload' flag in your flowtable definition, e.g.
-+
-+::
-+	table inet x {
-+		flowtable f {
-+			hook ingress priority 0; devices = { eth0, eth1 };
-+			flags offload;
-+		}
-+		...
-+	}
-+
-+There is a workqueue that adds the flows to the hardware. Note that a few
-+packets might still run over the flowtable software path until the workqueue has
-+a chance to offload the flow to the network device.
-+
-+You can identify hardware offloaded flows through the [HW_OFFLOAD] tag when
-+listing your connection tracking table. Please, note that the [OFFLOAD] tag
-+refers to the software offload mode, so there is a distinction between [OFFLOAD]
-+which refers to the software flowtable fastpath and [HW_OFFLOAD] which refers
-+to the hardware offload datapath being used by the flow.
-+
-+The flowtable hardware offload infrastructure also supports for the DSA
-+(Distributed Switch Architecture).
-+
-+Limitations
-+-----------
-+
-+The flowtable behaves like a cache. The flowtable entries might get stale if
-+either the destination MAC address or the egress netdevice that is used for
-+transmission changes.
-+
-+This might be a problem if:
-+
-+- You run the flowtable in software mode and you combine bridge and IP
-+  forwarding in your setup.
-+- Hardware offload is enabled.
-+
- More reading
- ------------
- 
diff --git a/target/linux/generic/backport-5.10/610-v5.13-35-net-ethernet-mediatek-ppe-fix-busy-wait-loop.patch b/target/linux/generic/backport-5.10/610-v5.13-35-net-ethernet-mediatek-ppe-fix-busy-wait-loop.patch
deleted file mode 100644
index 66cd053cd1af..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-35-net-ethernet-mediatek-ppe-fix-busy-wait-loop.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From c5d66587b8900201e1530b7c18d41e87bd5812f4 Mon Sep 17 00:00:00 2001
-From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Date: Thu, 15 Apr 2021 17:37:48 -0700
-Subject: [PATCH] net: ethernet: mediatek: ppe: fix busy wait loop
-
-The intention is for the loop to timeout if the body does not succeed.
-The current logic calls time_is_before_jiffies(timeout) which is false
-until after the timeout, so the loop body never executes.
-
-Fix by using readl_poll_timeout as a more standard and less error-prone
-solution.
-
-Fixes: ba37b7caf1ed ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Cc: Felix Fietkau <nbd@nbd.name>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_ppe.c | 20 +++++++++-----------
- drivers/net/ethernet/mediatek/mtk_ppe.h |  1 +
- 2 files changed, 10 insertions(+), 11 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -2,9 +2,8 @@
- /* Copyright (C) 2020 Felix Fietkau <nbd@nbd.name> */
- 
- #include <linux/kernel.h>
--#include <linux/jiffies.h>
--#include <linux/delay.h>
- #include <linux/io.h>
-+#include <linux/iopoll.h>
- #include <linux/etherdevice.h>
- #include <linux/platform_device.h>
- #include "mtk_ppe.h"
-@@ -44,18 +43,17 @@ static u32 ppe_clear(struct mtk_ppe *ppe
- 
- static int mtk_ppe_wait_busy(struct mtk_ppe *ppe)
- {
--	unsigned long timeout = jiffies + HZ;
--
--	while (time_is_before_jiffies(timeout)) {
--		if (!(ppe_r32(ppe, MTK_PPE_GLO_CFG) & MTK_PPE_GLO_CFG_BUSY))
--			return 0;
-+	int ret;
-+	u32 val;
- 
--		usleep_range(10, 20);
--	}
-+	ret = readl_poll_timeout(ppe->base + MTK_PPE_GLO_CFG, val,
-+				 !(val & MTK_PPE_GLO_CFG_BUSY),
-+				 20, MTK_PPE_WAIT_TIMEOUT_US);
- 
--	dev_err(ppe->dev, "PPE table busy");
-+	if (ret)
-+		dev_err(ppe->dev, "PPE table busy");
- 
--	return -ETIMEDOUT;
-+	return ret;
- }
- 
- static void mtk_ppe_cache_clear(struct mtk_ppe *ppe)
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -12,6 +12,7 @@
- #define MTK_PPE_ENTRIES_SHIFT		3
- #define MTK_PPE_ENTRIES			(1024 << MTK_PPE_ENTRIES_SHIFT)
- #define MTK_PPE_HASH_MASK		(MTK_PPE_ENTRIES - 1)
-+#define MTK_PPE_WAIT_TIMEOUT_US		1000000
- 
- #define MTK_FOE_IB1_UNBIND_TIMESTAMP	GENMASK(7, 0)
- #define MTK_FOE_IB1_UNBIND_PACKETS	GENMASK(23, 8)
diff --git a/target/linux/generic/backport-5.10/610-v5.13-36-net-ethernet-mediatek-fix-a-typo-bug-in-flow-offload.patch b/target/linux/generic/backport-5.10/610-v5.13-36-net-ethernet-mediatek-fix-a-typo-bug-in-flow-offload.patch
deleted file mode 100644
index de376bf78dae..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-36-net-ethernet-mediatek-fix-a-typo-bug-in-flow-offload.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 6ecaf81d4ac6365f9284f9d68d74f7c209e74f98 Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Sat, 17 Apr 2021 15:29:04 +0800
-Subject: [PATCH] net: ethernet: mediatek: fix a typo bug in flow offloading
-
-Issue was traffic problems after a while with increased ping times if
-flow offload is active. It turns out that key_offset with cookie is
-needed in rhashtable_params but was re-assigned to head_offset.
-Fix the assignment.
-
-Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support")
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Tested-by: Frank Wunderlich <frank-w@public-files.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_ppe_offload.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -44,7 +44,7 @@ struct mtk_flow_entry {
- 
- static const struct rhashtable_params mtk_flow_ht_params = {
- 	.head_offset = offsetof(struct mtk_flow_entry, node),
--	.head_offset = offsetof(struct mtk_flow_entry, cookie),
-+	.key_offset = offsetof(struct mtk_flow_entry, cookie),
- 	.key_len = sizeof(unsigned long),
- 	.automatic_shrinking = true,
- };
diff --git a/target/linux/generic/backport-5.10/610-v5.13-38-net-ethernet-mtk_eth_soc-unmap-RX-data-before-callin.patch b/target/linux/generic/backport-5.10/610-v5.13-38-net-ethernet-mtk_eth_soc-unmap-RX-data-before-callin.patch
deleted file mode 100644
index 908ec7998bdc..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-38-net-ethernet-mtk_eth_soc-unmap-RX-data-before-callin.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 5196c417854942e218a59ec87bf7d414b3bd581e Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Apr 2021 22:20:55 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: unmap RX data before calling
- build_skb
-
-Since build_skb accesses the data area (for initializing shinfo), dma unmap
-needs to happen before that call
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-[Ilya: split build_skb cleanup fix into a separate commit]
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1334,6 +1334,9 @@ static int mtk_poll_rx(struct napi_struc
- 			goto release_desc;
- 		}
- 
-+		dma_unmap_single(eth->dev, trxd.rxd1,
-+				 ring->buf_size, DMA_FROM_DEVICE);
-+
- 		/* receive data */
- 		skb = build_skb(data, ring->frag_size);
- 		if (unlikely(!skb)) {
-@@ -1343,8 +1346,6 @@ static int mtk_poll_rx(struct napi_struc
- 		}
- 		skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
- 
--		dma_unmap_single(eth->dev, trxd.rxd1,
--				 ring->buf_size, DMA_FROM_DEVICE);
- 		pktlen = RX_DMA_GET_PLEN0(trxd.rxd2);
- 		skb->dev = netdev;
- 		skb_put(skb, pktlen);
diff --git a/target/linux/generic/backport-5.10/610-v5.13-39-net-ethernet-mtk_eth_soc-fix-build_skb-cleanup.patch b/target/linux/generic/backport-5.10/610-v5.13-39-net-ethernet-mtk_eth_soc-fix-build_skb-cleanup.patch
deleted file mode 100644
index 4284e951cec2..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-39-net-ethernet-mtk_eth_soc-fix-build_skb-cleanup.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 787082ab9f7be4711e52f67c388535eda74a1269 Mon Sep 17 00:00:00 2001
-From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Date: Thu, 22 Apr 2021 22:20:56 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: fix build_skb cleanup
-
-In case build_skb fails, call skb_free_frag on the correct pointer. Also
-update the DMA structures with the new mapping before exiting, because
-the mapping was successful
-
-Suggested-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1340,9 +1340,9 @@ static int mtk_poll_rx(struct napi_struc
- 		/* receive data */
- 		skb = build_skb(data, ring->frag_size);
- 		if (unlikely(!skb)) {
--			skb_free_frag(new_data);
-+			skb_free_frag(data);
- 			netdev->stats.rx_dropped++;
--			goto release_desc;
-+			goto skip_rx;
- 		}
- 		skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
- 
-@@ -1362,6 +1362,7 @@ static int mtk_poll_rx(struct napi_struc
- 		skb_record_rx_queue(skb, 0);
- 		napi_gro_receive(napi, skb);
- 
-+skip_rx:
- 		ring->data[idx] = new_data;
- 		rxd->rxd1 = (unsigned int)dma_addr;
- 
diff --git a/target/linux/generic/backport-5.10/610-v5.13-40-net-ethernet-mtk_eth_soc-use-napi_consume_skb.patch b/target/linux/generic/backport-5.10/610-v5.13-40-net-ethernet-mtk_eth_soc-use-napi_consume_skb.patch
deleted file mode 100644
index a69f8830c557..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-40-net-ethernet-mtk_eth_soc-use-napi_consume_skb.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From c30c4a82739090a2de4a4e3f245355ea4fb3ec14 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Apr 2021 22:20:57 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: use napi_consume_skb
-
-Should improve performance, since it can use bulk free
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 19 ++++++++++++-------
- 1 file changed, 12 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -891,7 +891,8 @@ static int txd_to_idx(struct mtk_tx_ring
- 	return ((void *)dma - (void *)ring->dma) / sizeof(*dma);
- }
- 
--static void mtk_tx_unmap(struct mtk_eth *eth, struct mtk_tx_buf *tx_buf)
-+static void mtk_tx_unmap(struct mtk_eth *eth, struct mtk_tx_buf *tx_buf,
-+			 bool napi)
- {
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
- 		if (tx_buf->flags & MTK_TX_FLAGS_SINGLE0) {
-@@ -923,8 +924,12 @@ static void mtk_tx_unmap(struct mtk_eth
- 
- 	tx_buf->flags = 0;
- 	if (tx_buf->skb &&
--	    (tx_buf->skb != (struct sk_buff *)MTK_DMA_DUMMY_DESC))
--		dev_kfree_skb_any(tx_buf->skb);
-+	    (tx_buf->skb != (struct sk_buff *)MTK_DMA_DUMMY_DESC)) {
-+		if (napi)
-+			napi_consume_skb(tx_buf->skb, napi);
-+		else
-+			dev_kfree_skb_any(tx_buf->skb);
-+	}
- 	tx_buf->skb = NULL;
- }
- 
-@@ -1102,7 +1107,7 @@ err_dma:
- 		tx_buf = mtk_desc_to_tx_buf(ring, itxd);
- 
- 		/* unmap dma */
--		mtk_tx_unmap(eth, tx_buf);
-+		mtk_tx_unmap(eth, tx_buf, false);
- 
- 		itxd->txd3 = TX_DMA_LS0 | TX_DMA_OWNER_CPU;
- 		if (!MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
-@@ -1424,7 +1429,7 @@ static int mtk_poll_tx_qdma(struct mtk_e
- 			done[mac]++;
- 			budget--;
- 		}
--		mtk_tx_unmap(eth, tx_buf);
-+		mtk_tx_unmap(eth, tx_buf, true);
- 
- 		ring->last_free = desc;
- 		atomic_inc(&ring->free_count);
-@@ -1461,7 +1466,7 @@ static int mtk_poll_tx_pdma(struct mtk_e
- 			budget--;
- 		}
- 
--		mtk_tx_unmap(eth, tx_buf);
-+		mtk_tx_unmap(eth, tx_buf, true);
- 
- 		desc = &ring->dma[cpu];
- 		ring->last_free = desc;
-@@ -1663,7 +1668,7 @@ static void mtk_tx_clean(struct mtk_eth
- 
- 	if (ring->buf) {
- 		for (i = 0; i < MTK_DMA_SIZE; i++)
--			mtk_tx_unmap(eth, &ring->buf[i]);
-+			mtk_tx_unmap(eth, &ring->buf[i], false);
- 		kfree(ring->buf);
- 		ring->buf = NULL;
- 	}
diff --git a/target/linux/generic/backport-5.10/610-v5.13-41-net-ethernet-mtk_eth_soc-reduce-MDIO-bus-access-late.patch b/target/linux/generic/backport-5.10/610-v5.13-41-net-ethernet-mtk_eth_soc-reduce-MDIO-bus-access-late.patch
deleted file mode 100644
index 7ebc3fa90345..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-41-net-ethernet-mtk_eth_soc-reduce-MDIO-bus-access-late.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 3630d519d7c3eab92567658690e44ffe0517d109 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Apr 2021 22:20:58 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: reduce MDIO bus access latency
-
-usleep_range often ends up sleeping much longer than the 10-20us provided
-as a range here. This causes significant latency in mdio bus acceses,
-which easily adds multiple seconds to the boot time on MT7621 when polling
-DSA slave ports.
-Use cond_resched instead of usleep_range, since the MDIO access does not
-take much time
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -86,7 +86,7 @@ static int mtk_mdio_busy_wait(struct mtk
- 			return 0;
- 		if (time_after(jiffies, t_start + PHY_IAC_TIMEOUT))
- 			break;
--		usleep_range(10, 20);
-+		cond_resched();
- 	}
- 
- 	dev_err(eth->dev, "mdio: MDIO timeout\n");
diff --git a/target/linux/generic/backport-5.10/610-v5.13-42-net-ethernet-mtk_eth_soc-remove-unnecessary-TX-queue.patch b/target/linux/generic/backport-5.10/610-v5.13-42-net-ethernet-mtk_eth_soc-remove-unnecessary-TX-queue.patch
deleted file mode 100644
index f08efc1b770b..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-42-net-ethernet-mtk_eth_soc-remove-unnecessary-TX-queue.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 16ef670789b252b221700adc413497ed2f941d8a Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Apr 2021 22:20:59 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: remove unnecessary TX queue stops
-
-When running short on descriptors, only stop the queue for the netdev that
-tx was attempted for. By the time something tries to send on the other
-netdev, the ring might have some more room already.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 15 ++-------------
- 1 file changed, 2 insertions(+), 13 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1164,17 +1164,6 @@ static void mtk_wake_queue(struct mtk_et
- 	}
- }
- 
--static void mtk_stop_queue(struct mtk_eth *eth)
--{
--	int i;
--
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
--		if (!eth->netdev[i])
--			continue;
--		netif_stop_queue(eth->netdev[i]);
--	}
--}
--
- static netdev_tx_t mtk_start_xmit(struct sk_buff *skb, struct net_device *dev)
- {
- 	struct mtk_mac *mac = netdev_priv(dev);
-@@ -1195,7 +1184,7 @@ static netdev_tx_t mtk_start_xmit(struct
- 
- 	tx_num = mtk_cal_txd_req(skb);
- 	if (unlikely(atomic_read(&ring->free_count) <= tx_num)) {
--		mtk_stop_queue(eth);
-+		netif_stop_queue(dev);
- 		netif_err(eth, tx_queued, dev,
- 			  "Tx Ring full when queue awake!\n");
- 		spin_unlock(&eth->page_lock);
-@@ -1221,7 +1210,7 @@ static netdev_tx_t mtk_start_xmit(struct
- 		goto drop;
- 
- 	if (unlikely(atomic_read(&ring->free_count) <= ring->thresh))
--		mtk_stop_queue(eth);
-+		netif_stop_queue(dev);
- 
- 	spin_unlock(&eth->page_lock);
- 
diff --git a/target/linux/generic/backport-5.10/610-v5.13-43-net-ethernet-mtk_eth_soc-use-larger-burst-size-for-Q.patch b/target/linux/generic/backport-5.10/610-v5.13-43-net-ethernet-mtk_eth_soc-use-larger-burst-size-for-Q.patch
deleted file mode 100644
index a8be3f466793..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-43-net-ethernet-mtk_eth_soc-use-larger-burst-size-for-Q.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 59555a8d0dd39bf60b7ca1ba5e7393d293f7398d Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Apr 2021 22:21:00 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: use larger burst size for QDMA TX
-
-Improves tx performance
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2235,7 +2235,7 @@ static int mtk_start_dma(struct mtk_eth
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
- 		mtk_w32(eth,
- 			MTK_TX_WB_DDONE | MTK_TX_DMA_EN |
--			MTK_DMA_SIZE_16DWORDS | MTK_NDP_CO_PRO |
-+			MTK_TX_BT_32DWORDS | MTK_NDP_CO_PRO |
- 			MTK_RX_DMA_EN | MTK_RX_2B_OFFSET |
- 			MTK_RX_BT_32DWORDS,
- 			MTK_QDMA_GLO_CFG);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -202,7 +202,7 @@
- #define MTK_RX_BT_32DWORDS	(3 << 11)
- #define MTK_NDP_CO_PRO		BIT(10)
- #define MTK_TX_WB_DDONE		BIT(6)
--#define MTK_DMA_SIZE_16DWORDS	(2 << 4)
-+#define MTK_TX_BT_32DWORDS	(3 << 4)
- #define MTK_RX_DMA_BUSY		BIT(3)
- #define MTK_TX_DMA_BUSY		BIT(1)
- #define MTK_RX_DMA_EN		BIT(2)
diff --git a/target/linux/generic/backport-5.10/610-v5.13-44-net-ethernet-mtk_eth_soc-increase-DMA-ring-sizes.patch b/target/linux/generic/backport-5.10/610-v5.13-44-net-ethernet-mtk_eth_soc-increase-DMA-ring-sizes.patch
deleted file mode 100644
index d695f0fb8a6c..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-44-net-ethernet-mtk_eth_soc-increase-DMA-ring-sizes.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 6b4423b258b91032c50a5efca15d3d9bb194ea1d Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Apr 2021 22:21:01 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: increase DMA ring sizes
-
-256 descriptors is not enough for multi-gigabit traffic under load on
-MT7622. Bump it to 512 to improve performance.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -21,7 +21,7 @@
- #define MTK_QDMA_PAGE_SIZE	2048
- #define	MTK_MAX_RX_LENGTH	1536
- #define MTK_TX_DMA_BUF_LEN	0x3fff
--#define MTK_DMA_SIZE		256
-+#define MTK_DMA_SIZE		512
- #define MTK_NAPI_WEIGHT		64
- #define MTK_MAC_COUNT		2
- #define MTK_RX_ETH_HLEN		(VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
diff --git a/target/linux/generic/backport-5.10/610-v5.13-45-net-ethernet-mtk_eth_soc-implement-dynamic-interrupt.patch b/target/linux/generic/backport-5.10/610-v5.13-45-net-ethernet-mtk_eth_soc-implement-dynamic-interrupt.patch
deleted file mode 100644
index e7898bbaffce..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-45-net-ethernet-mtk_eth_soc-implement-dynamic-interrupt.patch
+++ /dev/null
@@ -1,313 +0,0 @@
-From e9229ffd550b2d8c4997c67a501dbc3919fd4e26 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Apr 2021 22:21:02 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: implement dynamic interrupt
- moderation
-
-Reduces the number of interrupts under load
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-[Ilya: add documentation for new struct fields]
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/Kconfig       |  1 +
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 96 +++++++++++++++++++--
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 41 +++++++--
- 3 files changed, 124 insertions(+), 14 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/Kconfig
-+++ b/drivers/net/ethernet/mediatek/Kconfig
-@@ -10,6 +10,7 @@ if NET_VENDOR_MEDIATEK
- config NET_MEDIATEK_SOC
- 	tristate "MediaTek SoC Gigabit Ethernet support"
- 	select PHYLINK
-+	select DIMLIB
- 	help
- 	  This driver supports the gigabit ethernet MACs in the
- 	  MediaTek SoC family.
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1266,12 +1266,13 @@ static void mtk_update_rx_cpu_idx(struct
- static int mtk_poll_rx(struct napi_struct *napi, int budget,
- 		       struct mtk_eth *eth)
- {
-+	struct dim_sample dim_sample = {};
- 	struct mtk_rx_ring *ring;
- 	int idx;
- 	struct sk_buff *skb;
- 	u8 *data, *new_data;
- 	struct mtk_rx_dma *rxd, trxd;
--	int done = 0;
-+	int done = 0, bytes = 0;
- 
- 	while (done < budget) {
- 		struct net_device *netdev;
-@@ -1348,6 +1349,7 @@ static int mtk_poll_rx(struct napi_struc
- 		else
- 			skb_checksum_none_assert(skb);
- 		skb->protocol = eth_type_trans(skb, netdev);
-+		bytes += pktlen;
- 
- 		if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX &&
- 		    (trxd.rxd2 & RX_DMA_VTAG))
-@@ -1380,6 +1382,12 @@ rx_done:
- 		mtk_update_rx_cpu_idx(eth);
- 	}
- 
-+	eth->rx_packets += done;
-+	eth->rx_bytes += bytes;
-+	dim_update_sample(eth->rx_events, eth->rx_packets, eth->rx_bytes,
-+			  &dim_sample);
-+	net_dim(&eth->rx_dim, dim_sample);
-+
- 	return done;
- }
- 
-@@ -1472,6 +1480,7 @@ static int mtk_poll_tx_pdma(struct mtk_e
- static int mtk_poll_tx(struct mtk_eth *eth, int budget)
- {
- 	struct mtk_tx_ring *ring = &eth->tx_ring;
-+	struct dim_sample dim_sample = {};
- 	unsigned int done[MTK_MAX_DEVS];
- 	unsigned int bytes[MTK_MAX_DEVS];
- 	int total = 0, i;
-@@ -1489,8 +1498,14 @@ static int mtk_poll_tx(struct mtk_eth *e
- 			continue;
- 		netdev_completed_queue(eth->netdev[i], done[i], bytes[i]);
- 		total += done[i];
-+		eth->tx_packets += done[i];
-+		eth->tx_bytes += bytes[i];
- 	}
- 
-+	dim_update_sample(eth->tx_events, eth->tx_packets, eth->tx_bytes,
-+			  &dim_sample);
-+	net_dim(&eth->tx_dim, dim_sample);
-+
- 	if (mtk_queue_stopped(eth) &&
- 	    (atomic_read(&ring->free_count) > ring->thresh))
- 		mtk_wake_queue(eth);
-@@ -2171,6 +2186,7 @@ static irqreturn_t mtk_handle_irq_rx(int
- {
- 	struct mtk_eth *eth = _eth;
- 
-+	eth->rx_events++;
- 	if (likely(napi_schedule_prep(&eth->rx_napi))) {
- 		__napi_schedule(&eth->rx_napi);
- 		mtk_rx_irq_disable(eth, MTK_RX_DONE_INT);
-@@ -2183,6 +2199,7 @@ static irqreturn_t mtk_handle_irq_tx(int
- {
- 	struct mtk_eth *eth = _eth;
- 
-+	eth->tx_events++;
- 	if (likely(napi_schedule_prep(&eth->tx_napi))) {
- 		__napi_schedule(&eth->tx_napi);
- 		mtk_tx_irq_disable(eth, MTK_TX_DONE_INT);
-@@ -2371,6 +2388,9 @@ static int mtk_stop(struct net_device *d
- 	napi_disable(&eth->tx_napi);
- 	napi_disable(&eth->rx_napi);
- 
-+	cancel_work_sync(&eth->rx_dim.work);
-+	cancel_work_sync(&eth->tx_dim.work);
-+
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
- 		mtk_stop_dma(eth, MTK_QDMA_GLO_CFG);
- 	mtk_stop_dma(eth, MTK_PDMA_GLO_CFG);
-@@ -2423,6 +2443,64 @@ err_disable_clks:
- 	return ret;
- }
- 
-+static void mtk_dim_rx(struct work_struct *work)
-+{
-+	struct dim *dim = container_of(work, struct dim, work);
-+	struct mtk_eth *eth = container_of(dim, struct mtk_eth, rx_dim);
-+	struct dim_cq_moder cur_profile;
-+	u32 val, cur;
-+
-+	cur_profile = net_dim_get_rx_moderation(eth->rx_dim.mode,
-+						dim->profile_ix);
-+	spin_lock_bh(&eth->dim_lock);
-+
-+	val = mtk_r32(eth, MTK_PDMA_DELAY_INT);
-+	val &= MTK_PDMA_DELAY_TX_MASK;
-+	val |= MTK_PDMA_DELAY_RX_EN;
-+
-+	cur = min_t(u32, DIV_ROUND_UP(cur_profile.usec, 20), MTK_PDMA_DELAY_PTIME_MASK);
-+	val |= cur << MTK_PDMA_DELAY_RX_PTIME_SHIFT;
-+
-+	cur = min_t(u32, cur_profile.pkts, MTK_PDMA_DELAY_PINT_MASK);
-+	val |= cur << MTK_PDMA_DELAY_RX_PINT_SHIFT;
-+
-+	mtk_w32(eth, val, MTK_PDMA_DELAY_INT);
-+	mtk_w32(eth, val, MTK_QDMA_DELAY_INT);
-+
-+	spin_unlock_bh(&eth->dim_lock);
-+
-+	dim->state = DIM_START_MEASURE;
-+}
-+
-+static void mtk_dim_tx(struct work_struct *work)
-+{
-+	struct dim *dim = container_of(work, struct dim, work);
-+	struct mtk_eth *eth = container_of(dim, struct mtk_eth, tx_dim);
-+	struct dim_cq_moder cur_profile;
-+	u32 val, cur;
-+
-+	cur_profile = net_dim_get_tx_moderation(eth->tx_dim.mode,
-+						dim->profile_ix);
-+	spin_lock_bh(&eth->dim_lock);
-+
-+	val = mtk_r32(eth, MTK_PDMA_DELAY_INT);
-+	val &= MTK_PDMA_DELAY_RX_MASK;
-+	val |= MTK_PDMA_DELAY_TX_EN;
-+
-+	cur = min_t(u32, DIV_ROUND_UP(cur_profile.usec, 20), MTK_PDMA_DELAY_PTIME_MASK);
-+	val |= cur << MTK_PDMA_DELAY_TX_PTIME_SHIFT;
-+
-+	cur = min_t(u32, cur_profile.pkts, MTK_PDMA_DELAY_PINT_MASK);
-+	val |= cur << MTK_PDMA_DELAY_TX_PINT_SHIFT;
-+
-+	mtk_w32(eth, val, MTK_PDMA_DELAY_INT);
-+	mtk_w32(eth, val, MTK_QDMA_DELAY_INT);
-+
-+	spin_unlock_bh(&eth->dim_lock);
-+
-+	dim->state = DIM_START_MEASURE;
-+}
-+
- static int mtk_hw_init(struct mtk_eth *eth)
- {
- 	int i, val, ret;
-@@ -2444,9 +2522,6 @@ static int mtk_hw_init(struct mtk_eth *e
- 			goto err_disable_pm;
- 		}
- 
--		/* enable interrupt delay for RX */
--		mtk_w32(eth, MTK_PDMA_DELAY_RX_DELAY, MTK_PDMA_DELAY_INT);
--
- 		/* disable delay and normal interrupt */
- 		mtk_tx_irq_disable(eth, ~0);
- 		mtk_rx_irq_disable(eth, ~0);
-@@ -2485,11 +2560,11 @@ static int mtk_hw_init(struct mtk_eth *e
- 	/* Enable RX VLan Offloading */
- 	mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
- 
--	/* enable interrupt delay for RX */
--	mtk_w32(eth, MTK_PDMA_DELAY_RX_DELAY, MTK_PDMA_DELAY_INT);
-+	/* set interrupt delays based on current Net DIM sample */
-+	mtk_dim_rx(&eth->rx_dim.work);
-+	mtk_dim_tx(&eth->tx_dim.work);
- 
- 	/* disable delay and normal interrupt */
--	mtk_w32(eth, 0, MTK_QDMA_DELAY_INT);
- 	mtk_tx_irq_disable(eth, ~0);
- 	mtk_rx_irq_disable(eth, ~0);
- 
-@@ -2994,6 +3069,13 @@ static int mtk_probe(struct platform_dev
- 	spin_lock_init(&eth->page_lock);
- 	spin_lock_init(&eth->tx_irq_lock);
- 	spin_lock_init(&eth->rx_irq_lock);
-+	spin_lock_init(&eth->dim_lock);
-+
-+	eth->rx_dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE;
-+	INIT_WORK(&eth->rx_dim.work, mtk_dim_rx);
-+
-+	eth->tx_dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE;
-+	INIT_WORK(&eth->tx_dim.work, mtk_dim_tx);
- 
- 	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
- 		eth->ethsys = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -16,6 +16,7 @@
- #include <linux/refcount.h>
- #include <linux/phylink.h>
- #include <linux/rhashtable.h>
-+#include <linux/dim.h>
- #include "mtk_ppe.h"
- 
- #define MTK_QDMA_PAGE_SIZE	2048
-@@ -136,13 +137,18 @@
- 
- /* PDMA Delay Interrupt Register */
- #define MTK_PDMA_DELAY_INT		0xa0c
-+#define MTK_PDMA_DELAY_RX_MASK		GENMASK(15, 0)
- #define MTK_PDMA_DELAY_RX_EN		BIT(15)
--#define MTK_PDMA_DELAY_RX_PINT		4
- #define MTK_PDMA_DELAY_RX_PINT_SHIFT	8
--#define MTK_PDMA_DELAY_RX_PTIME		4
--#define MTK_PDMA_DELAY_RX_DELAY		\
--	(MTK_PDMA_DELAY_RX_EN | MTK_PDMA_DELAY_RX_PTIME | \
--	(MTK_PDMA_DELAY_RX_PINT << MTK_PDMA_DELAY_RX_PINT_SHIFT))
-+#define MTK_PDMA_DELAY_RX_PTIME_SHIFT	0
-+
-+#define MTK_PDMA_DELAY_TX_MASK		GENMASK(31, 16)
-+#define MTK_PDMA_DELAY_TX_EN		BIT(31)
-+#define MTK_PDMA_DELAY_TX_PINT_SHIFT	24
-+#define MTK_PDMA_DELAY_TX_PTIME_SHIFT	16
-+
-+#define MTK_PDMA_DELAY_PINT_MASK	0x7f
-+#define MTK_PDMA_DELAY_PTIME_MASK	0xff
- 
- /* PDMA Interrupt Status Register */
- #define MTK_PDMA_INT_STATUS	0xa20
-@@ -224,6 +230,7 @@
- /* QDMA Interrupt Status Register */
- #define MTK_QDMA_INT_STATUS	0x1A18
- #define MTK_RX_DONE_DLY		BIT(30)
-+#define MTK_TX_DONE_DLY		BIT(28)
- #define MTK_RX_DONE_INT3	BIT(19)
- #define MTK_RX_DONE_INT2	BIT(18)
- #define MTK_RX_DONE_INT1	BIT(17)
-@@ -233,8 +240,7 @@
- #define MTK_TX_DONE_INT1	BIT(1)
- #define MTK_TX_DONE_INT0	BIT(0)
- #define MTK_RX_DONE_INT		MTK_RX_DONE_DLY
--#define MTK_TX_DONE_INT		(MTK_TX_DONE_INT0 | MTK_TX_DONE_INT1 | \
--				 MTK_TX_DONE_INT2 | MTK_TX_DONE_INT3)
-+#define MTK_TX_DONE_INT		MTK_TX_DONE_DLY
- 
- /* QDMA Interrupt grouping registers */
- #define MTK_QDMA_INT_GRP1	0x1a20
-@@ -864,6 +870,7 @@ struct mtk_sgmii {
-  * @page_lock:		Make sure that register operations are atomic
-  * @tx_irq__lock:	Make sure that IRQ register operations are atomic
-  * @rx_irq__lock:	Make sure that IRQ register operations are atomic
-+ * @dim_lock:		Make sure that Net DIM operations are atomic
-  * @dummy_dev:		we run 2 netdevs on 1 physical DMA ring and need a
-  *			dummy for NAPI to work
-  * @netdev:		The netdev instances
-@@ -882,6 +889,14 @@ struct mtk_sgmii {
-  * @rx_ring_qdma:	Pointer to the memory holding info about the QDMA RX ring
-  * @tx_napi:		The TX NAPI struct
-  * @rx_napi:		The RX NAPI struct
-+ * @rx_events:		Net DIM RX event counter
-+ * @rx_packets:		Net DIM RX packet counter
-+ * @rx_bytes:		Net DIM RX byte counter
-+ * @rx_dim:		Net DIM RX context
-+ * @tx_events:		Net DIM TX event counter
-+ * @tx_packets:		Net DIM TX packet counter
-+ * @tx_bytes:		Net DIM TX byte counter
-+ * @tx_dim:		Net DIM TX context
-  * @scratch_ring:	Newer SoCs need memory for a second HW managed TX ring
-  * @phy_scratch_ring:	physical address of scratch_ring
-  * @scratch_head:	The scratch memory that scratch_ring points to.
-@@ -926,6 +941,18 @@ struct mtk_eth {
- 
- 	const struct mtk_soc_data	*soc;
- 
-+	spinlock_t			dim_lock;
-+
-+	u32				rx_events;
-+	u32				rx_packets;
-+	u32				rx_bytes;
-+	struct dim			rx_dim;
-+
-+	u32				tx_events;
-+	u32				tx_packets;
-+	u32				tx_bytes;
-+	struct dim			tx_dim;
-+
- 	u32				tx_int_mask_reg;
- 	u32				tx_int_status_reg;
- 	u32				rx_dma_l4_valid;
diff --git a/target/linux/generic/backport-5.10/610-v5.13-46-net-ethernet-mtk_eth_soc-cache-HW-pointer-of-last-fr.patch b/target/linux/generic/backport-5.10/610-v5.13-46-net-ethernet-mtk_eth_soc-cache-HW-pointer-of-last-fr.patch
deleted file mode 100644
index 69f8536f0a2a..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-46-net-ethernet-mtk_eth_soc-cache-HW-pointer-of-last-fr.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 4e6bf609569c59b6bd6acf4a607c096cbd820d79 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Apr 2021 22:21:03 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: cache HW pointer of last freed TX
- descriptor
-
-The value is only updated by the CPU, so it is cheaper to access from the
-ring data structure than from a hardware register.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8 ++++----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 ++
- 2 files changed, 6 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1400,7 +1400,7 @@ static int mtk_poll_tx_qdma(struct mtk_e
- 	struct mtk_tx_buf *tx_buf;
- 	u32 cpu, dma;
- 
--	cpu = mtk_r32(eth, MTK_QTX_CRX_PTR);
-+	cpu = ring->last_free_ptr;
- 	dma = mtk_r32(eth, MTK_QTX_DRX_PTR);
- 
- 	desc = mtk_qdma_phys_to_virt(ring, cpu);
-@@ -1434,6 +1434,7 @@ static int mtk_poll_tx_qdma(struct mtk_e
- 		cpu = next_cpu;
- 	}
- 
-+	ring->last_free_ptr = cpu;
- 	mtk_w32(eth, cpu, MTK_QTX_CRX_PTR);
- 
- 	return budget;
-@@ -1634,6 +1635,7 @@ static int mtk_tx_alloc(struct mtk_eth *
- 	atomic_set(&ring->free_count, MTK_DMA_SIZE - 2);
- 	ring->next_free = &ring->dma[0];
- 	ring->last_free = &ring->dma[MTK_DMA_SIZE - 1];
-+	ring->last_free_ptr = (u32)(ring->phys + ((MTK_DMA_SIZE - 1) * sz));
- 	ring->thresh = MAX_SKB_FRAGS;
- 
- 	/* make sure that all changes to the dma ring are flushed before we
-@@ -1647,9 +1649,7 @@ static int mtk_tx_alloc(struct mtk_eth *
- 		mtk_w32(eth,
- 			ring->phys + ((MTK_DMA_SIZE - 1) * sz),
- 			MTK_QTX_CRX_PTR);
--		mtk_w32(eth,
--			ring->phys + ((MTK_DMA_SIZE - 1) * sz),
--			MTK_QTX_DRX_PTR);
-+		mtk_w32(eth, ring->last_free_ptr, MTK_QTX_DRX_PTR);
- 		mtk_w32(eth, (QDMA_RES_THRES << 8) | QDMA_RES_THRES,
- 			MTK_QTX_CFG(0));
- 	} else {
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -657,6 +657,7 @@ struct mtk_tx_buf {
-  * @phys:		The physical addr of tx_buf
-  * @next_free:		Pointer to the next free descriptor
-  * @last_free:		Pointer to the last free descriptor
-+ * @last_free_ptr:	Hardware pointer value of the last free descriptor
-  * @thresh:		The threshold of minimum amount of free descriptors
-  * @free_count:		QDMA uses a linked list. Track how many free descriptors
-  *			are present
-@@ -667,6 +668,7 @@ struct mtk_tx_ring {
- 	dma_addr_t phys;
- 	struct mtk_tx_dma *next_free;
- 	struct mtk_tx_dma *last_free;
-+	u32 last_free_ptr;
- 	u16 thresh;
- 	atomic_t free_count;
- 	int dma_size;
diff --git a/target/linux/generic/backport-5.10/610-v5.13-47-net-ethernet-mtk_eth_soc-only-read-the-full-RX-descr.patch b/target/linux/generic/backport-5.10/610-v5.13-47-net-ethernet-mtk_eth_soc-only-read-the-full-RX-descr.patch
deleted file mode 100644
index 6484361ee513..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-47-net-ethernet-mtk_eth_soc-only-read-the-full-RX-descr.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 816ac3e6e67bdd78d86226c6eb53619780750e92 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Apr 2021 22:21:04 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: only read the full RX descriptor
- if DMA is done
-
-Uncached memory access is expensive, and there is no need to access all
-descriptor words if we can't process them anyway
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 12 ++++++++----
- 1 file changed, 8 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -799,13 +799,18 @@ static inline int mtk_max_buf_size(int f
- 	return buf_size;
- }
- 
--static inline void mtk_rx_get_desc(struct mtk_rx_dma *rxd,
-+static inline bool mtk_rx_get_desc(struct mtk_rx_dma *rxd,
- 				   struct mtk_rx_dma *dma_rxd)
- {
--	rxd->rxd1 = READ_ONCE(dma_rxd->rxd1);
- 	rxd->rxd2 = READ_ONCE(dma_rxd->rxd2);
-+	if (!(rxd->rxd2 & RX_DMA_DONE))
-+		return false;
-+
-+	rxd->rxd1 = READ_ONCE(dma_rxd->rxd1);
- 	rxd->rxd3 = READ_ONCE(dma_rxd->rxd3);
- 	rxd->rxd4 = READ_ONCE(dma_rxd->rxd4);
-+
-+	return true;
- }
- 
- static void *mtk_max_lro_buf_alloc(gfp_t gfp_mask)
-@@ -1288,8 +1293,7 @@ static int mtk_poll_rx(struct napi_struc
- 		rxd = &ring->dma[idx];
- 		data = ring->data[idx];
- 
--		mtk_rx_get_desc(&trxd, rxd);
--		if (!(trxd.rxd2 & RX_DMA_DONE))
-+		if (!mtk_rx_get_desc(&trxd, rxd))
- 			break;
- 
- 		/* find out which mac the packet come from. values start at 1 */
diff --git a/target/linux/generic/backport-5.10/610-v5.13-48-net-ethernet-mtk_eth_soc-reduce-unnecessary-interrup.patch b/target/linux/generic/backport-5.10/610-v5.13-48-net-ethernet-mtk_eth_soc-reduce-unnecessary-interrup.patch
deleted file mode 100644
index 27c04ae3c42c..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-48-net-ethernet-mtk_eth_soc-reduce-unnecessary-interrup.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 16769a8923fad5a5377253bcd76b0e0d64976c73 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Apr 2021 22:21:05 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: reduce unnecessary interrupts
-
-Avoid rearming interrupt if napi_complete returns false
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 9 +++++----
- 1 file changed, 5 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1555,8 +1555,8 @@ static int mtk_napi_tx(struct napi_struc
- 	if (status & MTK_TX_DONE_INT)
- 		return budget;
- 
--	napi_complete(napi);
--	mtk_tx_irq_enable(eth, MTK_TX_DONE_INT);
-+	if (napi_complete(napi))
-+		mtk_tx_irq_enable(eth, MTK_TX_DONE_INT);
- 
- 	return tx_done;
- }
-@@ -1589,8 +1589,9 @@ poll_again:
- 		remain_budget -= rx_done;
- 		goto poll_again;
- 	}
--	napi_complete(napi);
--	mtk_rx_irq_enable(eth, MTK_RX_DONE_INT);
-+
-+	if (napi_complete(napi))
-+		mtk_rx_irq_enable(eth, MTK_RX_DONE_INT);
- 
- 	return rx_done + budget - remain_budget;
- }
diff --git a/target/linux/generic/backport-5.10/610-v5.13-49-net-ethernet-mtk_eth_soc-rework-NAPI-callbacks.patch b/target/linux/generic/backport-5.10/610-v5.13-49-net-ethernet-mtk_eth_soc-rework-NAPI-callbacks.patch
deleted file mode 100644
index 21a3e9bef099..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-49-net-ethernet-mtk_eth_soc-rework-NAPI-callbacks.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From db2c7b353db3b3f71b55f9ff4627d8a786446fbe Mon Sep 17 00:00:00 2001
-From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Date: Thu, 22 Apr 2021 22:21:06 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: rework NAPI callbacks
-
-Use napi_complete_done to communicate total TX and RX work done to NAPI.
-Count total RX work up instead of remaining work down for clarity.
-Remove unneeded local variables for clarity. Use do {} while instead of
-goto for clarity.
-
-Suggested-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 54 +++++++++------------
- 1 file changed, 24 insertions(+), 30 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1532,7 +1532,6 @@ static void mtk_handle_status_irq(struct
- static int mtk_napi_tx(struct napi_struct *napi, int budget)
- {
- 	struct mtk_eth *eth = container_of(napi, struct mtk_eth, tx_napi);
--	u32 status, mask;
- 	int tx_done = 0;
- 
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
-@@ -1541,21 +1540,19 @@ static int mtk_napi_tx(struct napi_struc
- 	tx_done = mtk_poll_tx(eth, budget);
- 
- 	if (unlikely(netif_msg_intr(eth))) {
--		status = mtk_r32(eth, eth->tx_int_status_reg);
--		mask = mtk_r32(eth, eth->tx_int_mask_reg);
- 		dev_info(eth->dev,
--			 "done tx %d, intr 0x%08x/0x%x\n",
--			 tx_done, status, mask);
-+			 "done tx %d, intr 0x%08x/0x%x\n", tx_done,
-+			 mtk_r32(eth, eth->tx_int_status_reg),
-+			 mtk_r32(eth, eth->tx_int_mask_reg));
- 	}
- 
- 	if (tx_done == budget)
- 		return budget;
- 
--	status = mtk_r32(eth, eth->tx_int_status_reg);
--	if (status & MTK_TX_DONE_INT)
-+	if (mtk_r32(eth, eth->tx_int_status_reg) & MTK_TX_DONE_INT)
- 		return budget;
- 
--	if (napi_complete(napi))
-+	if (napi_complete_done(napi, tx_done))
- 		mtk_tx_irq_enable(eth, MTK_TX_DONE_INT);
- 
- 	return tx_done;
-@@ -1564,36 +1561,33 @@ static int mtk_napi_tx(struct napi_struc
- static int mtk_napi_rx(struct napi_struct *napi, int budget)
- {
- 	struct mtk_eth *eth = container_of(napi, struct mtk_eth, rx_napi);
--	u32 status, mask;
--	int rx_done = 0;
--	int remain_budget = budget;
-+	int rx_done_total = 0;
- 
- 	mtk_handle_status_irq(eth);
- 
--poll_again:
--	mtk_w32(eth, MTK_RX_DONE_INT, MTK_PDMA_INT_STATUS);
--	rx_done = mtk_poll_rx(napi, remain_budget, eth);
-+	do {
-+		int rx_done;
- 
--	if (unlikely(netif_msg_intr(eth))) {
--		status = mtk_r32(eth, MTK_PDMA_INT_STATUS);
--		mask = mtk_r32(eth, MTK_PDMA_INT_MASK);
--		dev_info(eth->dev,
--			 "done rx %d, intr 0x%08x/0x%x\n",
--			 rx_done, status, mask);
--	}
--	if (rx_done == remain_budget)
--		return budget;
-+		mtk_w32(eth, MTK_RX_DONE_INT, MTK_PDMA_INT_STATUS);
-+		rx_done = mtk_poll_rx(napi, budget - rx_done_total, eth);
-+		rx_done_total += rx_done;
-+
-+		if (unlikely(netif_msg_intr(eth))) {
-+			dev_info(eth->dev,
-+				 "done rx %d, intr 0x%08x/0x%x\n", rx_done,
-+				 mtk_r32(eth, MTK_PDMA_INT_STATUS),
-+				 mtk_r32(eth, MTK_PDMA_INT_MASK));
-+		}
- 
--	status = mtk_r32(eth, MTK_PDMA_INT_STATUS);
--	if (status & MTK_RX_DONE_INT) {
--		remain_budget -= rx_done;
--		goto poll_again;
--	}
-+		if (rx_done_total == budget)
-+			return budget;
-+
-+	} while (mtk_r32(eth, MTK_PDMA_INT_STATUS) & MTK_RX_DONE_INT);
- 
--	if (napi_complete(napi))
-+	if (napi_complete_done(napi, rx_done_total))
- 		mtk_rx_irq_enable(eth, MTK_RX_DONE_INT);
- 
--	return rx_done + budget - remain_budget;
-+	return rx_done_total;
- }
- 
- static int mtk_tx_alloc(struct mtk_eth *eth)
diff --git a/target/linux/generic/backport-5.10/610-v5.13-50-net-ethernet-mtk_eth_soc-set-PPE-flow-hash-as-skb-ha.patch b/target/linux/generic/backport-5.10/610-v5.13-50-net-ethernet-mtk_eth_soc-set-PPE-flow-hash-as-skb-ha.patch
deleted file mode 100644
index aad129b89711..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-50-net-ethernet-mtk_eth_soc-set-PPE-flow-hash-as-skb-ha.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From fa817272c37ef78e25dc14e4760ac78a7043a18a Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Apr 2021 22:21:07 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: set PPE flow hash as skb hash if
- present
-
-This improves GRO performance
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-[Ilya: Use MTK_RXD4_FOE_ENTRY instead of GENMASK(13, 0)]
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -19,6 +19,7 @@
- #include <linux/interrupt.h>
- #include <linux/pinctrl/devinfo.h>
- #include <linux/phylink.h>
-+#include <linux/jhash.h>
- #include <net/dsa.h>
- 
- #include "mtk_eth_soc.h"
-@@ -1283,6 +1284,7 @@ static int mtk_poll_rx(struct napi_struc
- 		struct net_device *netdev;
- 		unsigned int pktlen;
- 		dma_addr_t dma_addr;
-+		u32 hash;
- 		int mac;
- 
- 		ring = mtk_get_rx_ring(eth);
-@@ -1355,6 +1357,12 @@ static int mtk_poll_rx(struct napi_struc
- 		skb->protocol = eth_type_trans(skb, netdev);
- 		bytes += pktlen;
- 
-+		hash = trxd.rxd4 & MTK_RXD4_FOE_ENTRY;
-+		if (hash != MTK_RXD4_FOE_ENTRY) {
-+			hash = jhash_1word(hash, 0);
-+			skb_set_hash(skb, hash, PKT_HASH_TYPE_L4);
-+		}
-+
- 		if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX &&
- 		    (trxd.rxd2 & RX_DMA_VTAG))
- 			__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
diff --git a/target/linux/generic/backport-5.10/610-v5.13-51-net-ethernet-mtk_eth_soc-use-iopoll.h-macro-for-DMA-.patch b/target/linux/generic/backport-5.10/610-v5.13-51-net-ethernet-mtk_eth_soc-use-iopoll.h-macro-for-DMA-.patch
deleted file mode 100644
index 493883f4f1c2..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-51-net-ethernet-mtk_eth_soc-use-iopoll.h-macro-for-DMA-.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 3bc8e0aff23be0526af0dbc7973a8866a08d73f1 Mon Sep 17 00:00:00 2001
-From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Date: Thu, 22 Apr 2021 22:21:08 -0700
-Subject: [PATCH] net: ethernet: mtk_eth_soc: use iopoll.h macro for DMA init
-
-Replace a tight busy-wait loop without a pause with a standard
-readx_poll_timeout_atomic routine with a 5 us poll period.
-
-Tested by booting a MT7621 device to ensure the driver initializes
-properly.
-
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 29 +++++++++------------
- drivers/net/ethernet/mediatek/mtk_eth_soc.h |  2 +-
- 2 files changed, 14 insertions(+), 17 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2075,25 +2075,22 @@ static int mtk_set_features(struct net_d
- /* wait for DMA to finish whatever it is doing before we start using it again */
- static int mtk_dma_busy_wait(struct mtk_eth *eth)
- {
--	unsigned long t_start = jiffies;
-+	unsigned int reg;
-+	int ret;
-+	u32 val;
- 
--	while (1) {
--		if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
--			if (!(mtk_r32(eth, MTK_QDMA_GLO_CFG) &
--			      (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)))
--				return 0;
--		} else {
--			if (!(mtk_r32(eth, MTK_PDMA_GLO_CFG) &
--			      (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)))
--				return 0;
--		}
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
-+		reg = MTK_QDMA_GLO_CFG;
-+	else
-+		reg = MTK_PDMA_GLO_CFG;
- 
--		if (time_after(jiffies, t_start + MTK_DMA_BUSY_TIMEOUT))
--			break;
--	}
-+	ret = readx_poll_timeout_atomic(__raw_readl, eth->base + reg, val,
-+					!(val & (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)),
-+					5, MTK_DMA_BUSY_TIMEOUT_US);
-+	if (ret)
-+		dev_err(eth->dev, "DMA init timeout\n");
- 
--	dev_err(eth->dev, "DMA init timeout\n");
--	return -1;
-+	return ret;
- }
- 
- static int mtk_dma_init(struct mtk_eth *eth)
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -213,7 +213,7 @@
- #define MTK_TX_DMA_BUSY		BIT(1)
- #define MTK_RX_DMA_EN		BIT(2)
- #define MTK_TX_DMA_EN		BIT(0)
--#define MTK_DMA_BUSY_TIMEOUT	HZ
-+#define MTK_DMA_BUSY_TIMEOUT_US	1000000
- 
- /* QDMA Reset Index Register */
- #define MTK_QDMA_RST_IDX	0x1A08
diff --git a/target/linux/generic/backport-5.10/610-v5.13-52-net-ethernet-mtk_eth_soc-missing-mutex.patch b/target/linux/generic/backport-5.10/610-v5.13-52-net-ethernet-mtk_eth_soc-missing-mutex.patch
deleted file mode 100644
index a846ce43e223..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-52-net-ethernet-mtk_eth_soc-missing-mutex.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Sun, 18 Apr 2021 23:11:44 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: missing mutex
-
-Patch 2ed37183abb7 ("netfilter: flowtable: separate replace, destroy and
-stats to different workqueues") splits the workqueue per event type. Add
-a mutex to serialize updates.
-
-Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support")
-Reported-by: Frank Wunderlich <frank-w@public-files.de>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -392,6 +392,8 @@ mtk_flow_offload_stats(struct mtk_eth *e
- 	return 0;
- }
- 
-+static DEFINE_MUTEX(mtk_flow_offload_mutex);
-+
- static int
- mtk_eth_setup_tc_block_cb(enum tc_setup_type type, void *type_data, void *cb_priv)
- {
-@@ -399,6 +401,7 @@ mtk_eth_setup_tc_block_cb(enum tc_setup_
- 	struct net_device *dev = cb_priv;
- 	struct mtk_mac *mac = netdev_priv(dev);
- 	struct mtk_eth *eth = mac->hw;
-+	int err;
- 
- 	if (!tc_can_offload(dev))
- 		return -EOPNOTSUPP;
-@@ -406,18 +409,24 @@ mtk_eth_setup_tc_block_cb(enum tc_setup_
- 	if (type != TC_SETUP_CLSFLOWER)
- 		return -EOPNOTSUPP;
- 
-+	mutex_lock(&mtk_flow_offload_mutex);
- 	switch (cls->command) {
- 	case FLOW_CLS_REPLACE:
--		return mtk_flow_offload_replace(eth, cls);
-+		err = mtk_flow_offload_replace(eth, cls);
-+		break;
- 	case FLOW_CLS_DESTROY:
--		return mtk_flow_offload_destroy(eth, cls);
-+		err = mtk_flow_offload_destroy(eth, cls);
-+		break;
- 	case FLOW_CLS_STATS:
--		return mtk_flow_offload_stats(eth, cls);
-+		err = mtk_flow_offload_stats(eth, cls);
-+		break;
- 	default:
--		return -EOPNOTSUPP;
-+		err = -EOPNOTSUPP;
-+		break;
- 	}
-+	mutex_unlock(&mtk_flow_offload_mutex);
- 
--	return 0;
-+	return err;
- }
- 
- static int
diff --git a/target/linux/generic/backport-5.10/610-v5.13-53-net-ethernet-mtk_eth_soc-handle-VLAN-pop-action.patch b/target/linux/generic/backport-5.10/610-v5.13-53-net-ethernet-mtk_eth_soc-handle-VLAN-pop-action.patch
deleted file mode 100644
index 806fd0dcdf56..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-53-net-ethernet-mtk_eth_soc-handle-VLAN-pop-action.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Sun, 18 Apr 2021 23:11:45 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: handle VLAN pop action
-
-Do not hit EOPNOTSUPP when flowtable offload provides a VLAN pop action.
-
-Fixes: efce49dfe6a8 ("netfilter: flowtable: add vlan pop action offload support")
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -233,6 +233,8 @@ mtk_flow_offload_replace(struct mtk_eth
- 			data.vlan.proto = act->vlan.proto;
- 			data.vlan.num++;
- 			break;
-+		case FLOW_ACTION_VLAN_POP:
-+			break;
- 		case FLOW_ACTION_PPPOE_PUSH:
- 			if (data.pppoe.num == 1)
- 				return -EOPNOTSUPP;
diff --git a/target/linux/generic/backport-5.10/610-v5.13-54-netfilter-flowtable-dst_check-from-garbage-collector.patch b/target/linux/generic/backport-5.10/610-v5.13-54-netfilter-flowtable-dst_check-from-garbage-collector.patch
deleted file mode 100644
index 42b55f021a41..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-54-netfilter-flowtable-dst_check-from-garbage-collector.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Sun, 28 Mar 2021 23:08:55 +0200
-Subject: [PATCH] netfilter: flowtable: dst_check() from garbage collector path
-
-Move dst_check() to the garbage collector path. Stale routes trigger the
-flow entry teardown state which makes affected flows go back to the
-classic forwarding path to re-evaluate flow offloading.
-
-IPv6 requires the dst cookie to work, store it in the flow_tuple,
-otherwise dst_check() always fails.
-
-Fixes: e5075c0badaa ("netfilter: flowtable: call dst_check() to fall back to classic forwarding")
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -129,7 +129,10 @@ struct flow_offload_tuple {
- 					in_vlan_ingress:2;
- 	u16				mtu;
- 	union {
--		struct dst_entry	*dst_cache;
-+		struct {
-+			struct dst_entry *dst_cache;
-+			u32		dst_cookie;
-+		};
- 		struct {
- 			u32		ifidx;
- 			u32		hw_ifidx;
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -74,6 +74,18 @@ err_ct_refcnt:
- }
- EXPORT_SYMBOL_GPL(flow_offload_alloc);
- 
-+static u32 flow_offload_dst_cookie(struct flow_offload_tuple *flow_tuple)
-+{
-+	const struct rt6_info *rt;
-+
-+	if (flow_tuple->l3proto == NFPROTO_IPV6) {
-+		rt = (const struct rt6_info *)flow_tuple->dst_cache;
-+		return rt6_get_cookie(rt);
-+	}
-+
-+	return 0;
-+}
-+
- static int flow_offload_fill_route(struct flow_offload *flow,
- 				   const struct nf_flow_route *route,
- 				   enum flow_offload_tuple_dir dir)
-@@ -116,6 +128,7 @@ static int flow_offload_fill_route(struc
- 			return -1;
- 
- 		flow_tuple->dst_cache = dst;
-+		flow_tuple->dst_cookie = flow_offload_dst_cookie(flow_tuple);
- 		break;
- 	}
- 	flow_tuple->xmit_type = route->tuple[dir].xmit_type;
-@@ -389,11 +402,33 @@ nf_flow_table_iterate(struct nf_flowtabl
- 	return err;
- }
- 
-+static bool flow_offload_stale_dst(struct flow_offload_tuple *tuple)
-+{
-+	struct dst_entry *dst;
-+
-+	if (tuple->xmit_type == FLOW_OFFLOAD_XMIT_NEIGH ||
-+	    tuple->xmit_type == FLOW_OFFLOAD_XMIT_XFRM) {
-+		dst = tuple->dst_cache;
-+		if (!dst_check(dst, tuple->dst_cookie))
-+			return true;
-+	}
-+
-+	return false;
-+}
-+
-+static bool nf_flow_has_stale_dst(struct flow_offload *flow)
-+{
-+	return flow_offload_stale_dst(&flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple) ||
-+	       flow_offload_stale_dst(&flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].tuple);
-+}
-+
- static void nf_flow_offload_gc_step(struct flow_offload *flow, void *data)
- {
- 	struct nf_flowtable *flow_table = data;
- 
--	if (nf_flow_has_expired(flow) || nf_ct_is_dying(flow->ct))
-+	if (nf_flow_has_expired(flow) ||
-+	    nf_ct_is_dying(flow->ct) ||
-+	    nf_flow_has_stale_dst(flow))
- 		set_bit(NF_FLOW_TEARDOWN, &flow->flags);
- 
- 	if (test_bit(NF_FLOW_TEARDOWN, &flow->flags)) {
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -364,15 +364,6 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	if (nf_flow_state_check(flow, iph->protocol, skb, thoff))
- 		return NF_ACCEPT;
- 
--	if (tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_NEIGH ||
--	    tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM) {
--		rt = (struct rtable *)tuplehash->tuple.dst_cache;
--		if (!dst_check(&rt->dst, 0)) {
--			flow_offload_teardown(flow);
--			return NF_ACCEPT;
--		}
--	}
--
- 	if (skb_try_make_writable(skb, thoff + hdrsize))
- 		return NF_DROP;
- 
-@@ -391,6 +382,7 @@ nf_flow_offload_ip_hook(void *priv, stru
- 		nf_ct_acct_update(flow->ct, tuplehash->tuple.dir, skb->len);
- 
- 	if (unlikely(tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)) {
-+		rt = (struct rtable *)tuplehash->tuple.dst_cache;
- 		memset(skb->cb, 0, sizeof(struct inet_skb_parm));
- 		IPCB(skb)->iif = skb->dev->ifindex;
- 		IPCB(skb)->flags = IPSKB_FORWARDED;
-@@ -399,6 +391,7 @@ nf_flow_offload_ip_hook(void *priv, stru
- 
- 	switch (tuplehash->tuple.xmit_type) {
- 	case FLOW_OFFLOAD_XMIT_NEIGH:
-+		rt = (struct rtable *)tuplehash->tuple.dst_cache;
- 		outdev = rt->dst.dev;
- 		skb->dev = outdev;
- 		nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr);
-@@ -607,15 +600,6 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 	if (nf_flow_state_check(flow, ip6h->nexthdr, skb, thoff))
- 		return NF_ACCEPT;
- 
--	if (tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_NEIGH ||
--	    tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM) {
--		rt = (struct rt6_info *)tuplehash->tuple.dst_cache;
--		if (!dst_check(&rt->dst, 0)) {
--			flow_offload_teardown(flow);
--			return NF_ACCEPT;
--		}
--	}
--
- 	if (skb_try_make_writable(skb, thoff + hdrsize))
- 		return NF_DROP;
- 
-@@ -633,6 +617,7 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 		nf_ct_acct_update(flow->ct, tuplehash->tuple.dir, skb->len);
- 
- 	if (unlikely(tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)) {
-+		rt = (struct rt6_info *)tuplehash->tuple.dst_cache;
- 		memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
- 		IP6CB(skb)->iif = skb->dev->ifindex;
- 		IP6CB(skb)->flags = IP6SKB_FORWARDED;
-@@ -641,6 +626,7 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 
- 	switch (tuplehash->tuple.xmit_type) {
- 	case FLOW_OFFLOAD_XMIT_NEIGH:
-+		rt = (struct rt6_info *)tuplehash->tuple.dst_cache;
- 		outdev = rt->dst.dev;
- 		skb->dev = outdev;
- 		nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6);
diff --git a/target/linux/generic/backport-5.10/610-v5.13-55-netfilter-conntrack-Introduce-tcp-offload-timeout-co.patch b/target/linux/generic/backport-5.10/610-v5.13-55-netfilter-conntrack-Introduce-tcp-offload-timeout-co.patch
deleted file mode 100644
index 0d30b0c593d2..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-55-netfilter-conntrack-Introduce-tcp-offload-timeout-co.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From: Oz Shlomo <ozsh@nvidia.com>
-Date: Thu, 3 Jun 2021 15:12:33 +0300
-Subject: [PATCH] netfilter: conntrack: Introduce tcp offload timeout
- configuration
-
-TCP connections may be offloaded from nf conntrack to nf flow table.
-Offloaded connections are aged after 30 seconds of inactivity.
-Once aged, ownership is returned to conntrack with a hard coded pickup
-time of 120 seconds, after which the connection may be deleted.
-eted. The current aging intervals may be too aggressive for some users.
-
-Provide users with the ability to control the nf flow table offload
-aging and pickup time intervals via sysctl parameter as a pre-step for
-configuring the nf flow table GC timeout intervals.
-
-Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
-Reviewed-by: Paul Blakey <paulb@nvidia.com>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netns/conntrack.h
-+++ b/include/net/netns/conntrack.h
-@@ -27,6 +27,10 @@ struct nf_tcp_net {
- 	int tcp_loose;
- 	int tcp_be_liberal;
- 	int tcp_max_retrans;
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	unsigned int offload_timeout;
-+	unsigned int offload_pickup;
-+#endif
- };
- 
- enum udp_conntrack {
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -1457,6 +1457,11 @@ void nf_conntrack_tcp_init_net(struct ne
- 	tn->tcp_loose = nf_ct_tcp_loose;
- 	tn->tcp_be_liberal = nf_ct_tcp_be_liberal;
- 	tn->tcp_max_retrans = nf_ct_tcp_max_retrans;
-+
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	tn->offload_timeout = 30 * HZ;
-+	tn->offload_pickup = 120 * HZ;
-+#endif
- }
- 
- const struct nf_conntrack_l4proto nf_conntrack_l4proto_tcp =
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -567,6 +567,10 @@ enum nf_ct_sysctl_index {
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_CLOSE,
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_RETRANS,
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_UNACK,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD,
-+	NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD_PICKUP,
-+#endif
- 	NF_SYSCTL_CT_PROTO_TCP_LOOSE,
- 	NF_SYSCTL_CT_PROTO_TCP_LIBERAL,
- 	NF_SYSCTL_CT_PROTO_TCP_MAX_RETRANS,
-@@ -757,6 +761,20 @@ static struct ctl_table nf_ct_sysctl_tab
- 		.mode		= 0644,
- 		.proc_handler	= proc_dointvec_jiffies,
- 	},
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	[NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD] = {
-+		.procname	= "nf_flowtable_tcp_timeout",
-+		.maxlen		= sizeof(unsigned int),
-+		.mode		= 0644,
-+		.proc_handler	= proc_dointvec_jiffies,
-+	},
-+	[NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD_PICKUP] = {
-+		.procname	= "nf_flowtable_tcp_pickup",
-+		.maxlen		= sizeof(unsigned int),
-+		.mode		= 0644,
-+		.proc_handler	= proc_dointvec_jiffies,
-+	},
-+#endif
- 	[NF_SYSCTL_CT_PROTO_TCP_LOOSE] = {
- 		.procname	= "nf_conntrack_tcp_loose",
- 		.maxlen		= sizeof(int),
-@@ -960,6 +978,12 @@ static void nf_conntrack_standalone_init
- 	XASSIGN(LIBERAL, &tn->tcp_be_liberal);
- 	XASSIGN(MAX_RETRANS, &tn->tcp_max_retrans);
- #undef XASSIGN
-+
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	table[NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD].data = &tn->offload_timeout;
-+	table[NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD_PICKUP].data = &tn->offload_pickup;
-+#endif
-+
- }
- 
- static void nf_conntrack_standalone_init_sctp_sysctl(struct net *net,
diff --git a/target/linux/generic/backport-5.10/610-v5.13-56-netfilter-conntrack-Introduce-udp-offload-timeout-co.patch b/target/linux/generic/backport-5.10/610-v5.13-56-netfilter-conntrack-Introduce-udp-offload-timeout-co.patch
deleted file mode 100644
index 93ff24a941b2..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-56-netfilter-conntrack-Introduce-udp-offload-timeout-co.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From: Oz Shlomo <ozsh@nvidia.com>
-Date: Thu, 3 Jun 2021 15:12:34 +0300
-Subject: [PATCH] netfilter: conntrack: Introduce udp offload timeout
- configuration
-
-UDP connections may be offloaded from nf conntrack to nf flow table.
-Offloaded connections are aged after 30 seconds of inactivity.
-Once aged, ownership is returned to conntrack with a hard coded pickup
-time of 30 seconds, after which the connection may be deleted.
-eted. The current aging intervals may be too aggressive for some users.
-
-Provide users with the ability to control the nf flow table offload
-aging and pickup time intervals via sysctl parameter as a pre-step for
-configuring the nf flow table GC timeout intervals.
-
-Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
-Reviewed-by: Paul Blakey <paulb@nvidia.com>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netns/conntrack.h
-+++ b/include/net/netns/conntrack.h
-@@ -41,6 +41,10 @@ enum udp_conntrack {
- 
- struct nf_udp_net {
- 	unsigned int timeouts[UDP_CT_MAX];
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	unsigned int offload_timeout;
-+	unsigned int offload_pickup;
-+#endif
- };
- 
- struct nf_icmp_net {
---- a/net/netfilter/nf_conntrack_proto_udp.c
-+++ b/net/netfilter/nf_conntrack_proto_udp.c
-@@ -273,6 +273,11 @@ void nf_conntrack_udp_init_net(struct ne
- 
- 	for (i = 0; i < UDP_CT_MAX; i++)
- 		un->timeouts[i] = udp_timeouts[i];
-+
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	un->offload_timeout = 30 * HZ;
-+	un->offload_pickup = 30 * HZ;
-+#endif
- }
- 
- const struct nf_conntrack_l4proto nf_conntrack_l4proto_udp =
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -576,6 +576,10 @@ enum nf_ct_sysctl_index {
- 	NF_SYSCTL_CT_PROTO_TCP_MAX_RETRANS,
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_UDP,
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_STREAM,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD,
-+	NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD_PICKUP,
-+#endif
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_ICMP,
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_ICMPV6,
- #ifdef CONFIG_NF_CT_PROTO_SCTP
-@@ -809,6 +813,20 @@ static struct ctl_table nf_ct_sysctl_tab
- 		.mode		= 0644,
- 		.proc_handler	= proc_dointvec_jiffies,
- 	},
-+#if IS_ENABLED(CONFIG_NFT_FLOW_OFFLOAD)
-+	[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD] = {
-+		.procname	= "nf_flowtable_udp_timeout",
-+		.maxlen		= sizeof(unsigned int),
-+		.mode		= 0644,
-+		.proc_handler	= proc_dointvec_jiffies,
-+	},
-+	[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD_PICKUP] = {
-+		.procname	= "nf_flowtable_udp_pickup",
-+		.maxlen		= sizeof(unsigned int),
-+		.mode		= 0644,
-+		.proc_handler	= proc_dointvec_jiffies,
-+	},
-+#endif
- 	[NF_SYSCTL_CT_PROTO_TIMEOUT_ICMP] = {
- 		.procname	= "nf_conntrack_icmp_timeout",
- 		.maxlen		= sizeof(unsigned int),
-@@ -1070,6 +1088,10 @@ static int nf_conntrack_standalone_init_
- 	table[NF_SYSCTL_CT_PROTO_TIMEOUT_ICMPV6].data = &nf_icmpv6_pernet(net)->timeout;
- 	table[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP].data = &un->timeouts[UDP_CT_UNREPLIED];
- 	table[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_STREAM].data = &un->timeouts[UDP_CT_REPLIED];
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	table[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD].data = &un->offload_timeout;
-+	table[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD_PICKUP].data = &un->offload_pickup;
-+#endif
- 
- 	nf_conntrack_standalone_init_tcp_sysctl(net, table);
- 	nf_conntrack_standalone_init_sctp_sysctl(net, table);
diff --git a/target/linux/generic/backport-5.10/610-v5.13-57-netfilter-flowtable-Set-offload-timeouts-according-t.patch b/target/linux/generic/backport-5.10/610-v5.13-57-netfilter-flowtable-Set-offload-timeouts-according-t.patch
deleted file mode 100644
index 1e82308eaa64..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-57-netfilter-flowtable-Set-offload-timeouts-according-t.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From: Oz Shlomo <ozsh@nvidia.com>
-Date: Thu, 3 Jun 2021 15:12:35 +0300
-Subject: [PATCH] netfilter: flowtable: Set offload timeouts according to proto
- values
-
-Currently the aging period for tcp/udp connections is hard coded to
-30 seconds. Aged tcp/udp connections configure a hard coded 120/30
-seconds pickup timeout for conntrack.
-This configuration may be too aggressive or permissive for some users.
-
-Dynamically configure the nf flow table GC timeout intervals according
-to the user defined values.
-
-Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
-Reviewed-by: Paul Blakey <paulb@nvidia.com>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -174,6 +174,8 @@ struct flow_offload {
- #define NF_FLOW_TIMEOUT (30 * HZ)
- #define nf_flowtable_time_stamp	(u32)jiffies
- 
-+unsigned long flow_offload_get_timeout(struct flow_offload *flow);
-+
- static inline __s32 nf_flow_timeout_delta(unsigned int timeout)
- {
- 	return (__s32)(timeout - nf_flowtable_time_stamp);
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -175,12 +175,10 @@ static void flow_offload_fixup_tcp(struc
- 	tcp->seen[1].td_maxwin = 0;
- }
- 
--#define NF_FLOWTABLE_TCP_PICKUP_TIMEOUT	(120 * HZ)
--#define NF_FLOWTABLE_UDP_PICKUP_TIMEOUT	(30 * HZ)
--
- static void flow_offload_fixup_ct_timeout(struct nf_conn *ct)
- {
- 	const struct nf_conntrack_l4proto *l4proto;
-+	struct net *net = nf_ct_net(ct);
- 	int l4num = nf_ct_protonum(ct);
- 	unsigned int timeout;
- 
-@@ -188,12 +186,17 @@ static void flow_offload_fixup_ct_timeou
- 	if (!l4proto)
- 		return;
- 
--	if (l4num == IPPROTO_TCP)
--		timeout = NF_FLOWTABLE_TCP_PICKUP_TIMEOUT;
--	else if (l4num == IPPROTO_UDP)
--		timeout = NF_FLOWTABLE_UDP_PICKUP_TIMEOUT;
--	else
-+	if (l4num == IPPROTO_TCP) {
-+		struct nf_tcp_net *tn = nf_tcp_pernet(net);
-+
-+		timeout = tn->offload_pickup;
-+	} else if (l4num == IPPROTO_UDP) {
-+		struct nf_udp_net *tn = nf_udp_pernet(net);
-+
-+		timeout = tn->offload_pickup;
-+	} else {
- 		return;
-+	}
- 
- 	if (nf_flow_timeout_delta(READ_ONCE(ct->timeout)) > (__s32)timeout)
- 		WRITE_ONCE(ct->timeout, nfct_time_stamp + timeout);
-@@ -265,11 +268,35 @@ static const struct rhashtable_params nf
- 	.automatic_shrinking	= true,
- };
- 
-+unsigned long flow_offload_get_timeout(struct flow_offload *flow)
-+{
-+	const struct nf_conntrack_l4proto *l4proto;
-+	unsigned long timeout = NF_FLOW_TIMEOUT;
-+	struct net *net = nf_ct_net(flow->ct);
-+	int l4num = nf_ct_protonum(flow->ct);
-+
-+	l4proto = nf_ct_l4proto_find(l4num);
-+	if (!l4proto)
-+		return timeout;
-+
-+	if (l4num == IPPROTO_TCP) {
-+		struct nf_tcp_net *tn = nf_tcp_pernet(net);
-+
-+		timeout = tn->offload_timeout;
-+	} else if (l4num == IPPROTO_UDP) {
-+		struct nf_udp_net *tn = nf_udp_pernet(net);
-+
-+		timeout = tn->offload_timeout;
-+	}
-+
-+	return timeout;
-+}
-+
- int flow_offload_add(struct nf_flowtable *flow_table, struct flow_offload *flow)
- {
- 	int err;
- 
--	flow->timeout = nf_flowtable_time_stamp + NF_FLOW_TIMEOUT;
-+	flow->timeout = nf_flowtable_time_stamp + flow_offload_get_timeout(flow);
- 
- 	err = rhashtable_insert_fast(&flow_table->rhashtable,
- 				     &flow->tuplehash[0].node,
-@@ -301,7 +328,7 @@ EXPORT_SYMBOL_GPL(flow_offload_add);
- void flow_offload_refresh(struct nf_flowtable *flow_table,
- 			  struct flow_offload *flow)
- {
--	flow->timeout = nf_flowtable_time_stamp + NF_FLOW_TIMEOUT;
-+	flow->timeout = nf_flowtable_time_stamp + flow_offload_get_timeout(flow);
- 
- 	if (likely(!nf_flowtable_hw_offload(flow_table)))
- 		return;
---- a/net/netfilter/nf_flow_table_offload.c
-+++ b/net/netfilter/nf_flow_table_offload.c
-@@ -885,7 +885,7 @@ static void flow_offload_work_stats(stru
- 
- 	lastused = max_t(u64, stats[0].lastused, stats[1].lastused);
- 	offload->flow->timeout = max_t(u64, offload->flow->timeout,
--				       lastused + NF_FLOW_TIMEOUT);
-+				       lastused + flow_offload_get_timeout(offload->flow));
- 
- 	if (offload->flowtable->flags & NF_FLOWTABLE_COUNTER) {
- 		if (stats[0].pkts)
-@@ -989,7 +989,7 @@ void nf_flow_offload_stats(struct nf_flo
- 	__s32 delta;
- 
- 	delta = nf_flow_timeout_delta(flow->timeout);
--	if ((delta >= (9 * NF_FLOW_TIMEOUT) / 10))
-+	if ((delta >= (9 * flow_offload_get_timeout(flow)) / 10))
- 		return;
- 
- 	offload = nf_flow_offload_work_alloc(flowtable, flow, FLOW_CLS_STATS);
diff --git a/target/linux/generic/backport-5.10/610-v5.13-58-netfilter-flowtable-Add-FLOW_OFFLOAD_XMIT_UNSPEC-xmi.patch b/target/linux/generic/backport-5.10/610-v5.13-58-netfilter-flowtable-Add-FLOW_OFFLOAD_XMIT_UNSPEC-xmi.patch
deleted file mode 100644
index 62edb2c8118a..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.13-58-netfilter-flowtable-Add-FLOW_OFFLOAD_XMIT_UNSPEC-xmi.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 78ed0a9bc6db76f8e5f5f4cb0d2b2f0d1bb21b24 Mon Sep 17 00:00:00 2001
-From: Roi Dayan <roid@nvidia.com>
-Date: Tue, 13 Apr 2021 11:06:05 +0300
-Subject: [PATCH] netfilter: flowtable: Add FLOW_OFFLOAD_XMIT_UNSPEC xmit type
-
-It could be xmit type was not set and would default to FLOW_OFFLOAD_XMIT_NEIGH
-and in this type the gc expect to have a route info.
-Fix that by adding FLOW_OFFLOAD_XMIT_UNSPEC which defaults to 0.
-
-Fixes: 8b9229d15877 ("netfilter: flowtable: dst_check() from garbage collector path")
-Signed-off-by: Roi Dayan <roid@nvidia.com>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
- include/net/netfilter/nf_flow_table.h | 3 ++-
- net/netfilter/nf_flow_table_core.c    | 3 +++
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -90,7 +90,8 @@ enum flow_offload_tuple_dir {
- #define FLOW_OFFLOAD_DIR_MAX	IP_CT_DIR_MAX
- 
- enum flow_offload_xmit_type {
--	FLOW_OFFLOAD_XMIT_NEIGH		= 0,
-+	FLOW_OFFLOAD_XMIT_UNSPEC	= 0,
-+	FLOW_OFFLOAD_XMIT_NEIGH,
- 	FLOW_OFFLOAD_XMIT_XFRM,
- 	FLOW_OFFLOAD_XMIT_DIRECT,
- };
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -130,6 +130,9 @@ static int flow_offload_fill_route(struc
- 		flow_tuple->dst_cache = dst;
- 		flow_tuple->dst_cookie = flow_offload_dst_cookie(flow_tuple);
- 		break;
-+	default:
-+		WARN_ON_ONCE(1);
-+		break;
- 	}
- 	flow_tuple->xmit_type = route->tuple[dir].xmit_type;
- 
diff --git a/target/linux/generic/backport-5.10/610-v5.15-58-netfilter-flowtable-avoid-possible-false-sharing.patch b/target/linux/generic/backport-5.10/610-v5.15-58-netfilter-flowtable-avoid-possible-false-sharing.patch
deleted file mode 100644
index a3d0a359231b..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.15-58-netfilter-flowtable-avoid-possible-false-sharing.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Sat, 17 Jul 2021 10:10:29 +0200
-Subject: [PATCH] netfilter: flowtable: avoid possible false sharing
-
-The flowtable follows the same timeout approach as conntrack, use the
-same idiom as in cc16921351d8 ("netfilter: conntrack: avoid same-timeout
-update") but also include the fix provided by e37542ba111f ("netfilter:
-conntrack: avoid possible false sharing").
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -331,7 +331,11 @@ EXPORT_SYMBOL_GPL(flow_offload_add);
- void flow_offload_refresh(struct nf_flowtable *flow_table,
- 			  struct flow_offload *flow)
- {
--	flow->timeout = nf_flowtable_time_stamp + flow_offload_get_timeout(flow);
-+	u32 timeout;
-+
-+	timeout = nf_flowtable_time_stamp + flow_offload_get_timeout(flow);
-+	if (READ_ONCE(flow->timeout) != timeout)
-+		WRITE_ONCE(flow->timeout, timeout);
- 
- 	if (likely(!nf_flowtable_hw_offload(flow_table)))
- 		return;
diff --git a/target/linux/generic/backport-5.10/610-v5.18-netfilter-flowtable-move-dst_check-to-packet-path.patch b/target/linux/generic/backport-5.10/610-v5.18-netfilter-flowtable-move-dst_check-to-packet-path.patch
deleted file mode 100644
index 53118939a3de..000000000000
--- a/target/linux/generic/backport-5.10/610-v5.18-netfilter-flowtable-move-dst_check-to-packet-path.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 2738d9d963bd1f06d5114c2b4fa5771a95703991 Mon Sep 17 00:00:00 2001
-From: Ritaro Takenaka <ritarot634@gmail.com>
-Date: Tue, 17 May 2022 12:55:30 +0200
-Subject: [PATCH] netfilter: flowtable: move dst_check to packet path
-
-Fixes sporadic IPv6 packet loss when flow offloading is enabled.
-
-IPv6 route GC and flowtable GC are not synchronized.
-When dst_cache becomes stale and a packet passes through the flow before
-the flowtable GC teardowns it, the packet can be dropped.
-So, it is necessary to check dst every time in packet path.
-
-Fixes: 227e1e4d0d6c ("netfilter: nf_flowtable: skip device lookup from interface index")
-Signed-off-by: Ritaro Takenaka <ritarot634@gmail.com>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
- net/netfilter/nf_flow_table_core.c | 23 +----------------------
- net/netfilter/nf_flow_table_ip.c   | 19 +++++++++++++++++++
- 2 files changed, 20 insertions(+), 22 deletions(-)
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -436,33 +436,12 @@ nf_flow_table_iterate(struct nf_flowtabl
- 	return err;
- }
- 
--static bool flow_offload_stale_dst(struct flow_offload_tuple *tuple)
--{
--	struct dst_entry *dst;
--
--	if (tuple->xmit_type == FLOW_OFFLOAD_XMIT_NEIGH ||
--	    tuple->xmit_type == FLOW_OFFLOAD_XMIT_XFRM) {
--		dst = tuple->dst_cache;
--		if (!dst_check(dst, tuple->dst_cookie))
--			return true;
--	}
--
--	return false;
--}
--
--static bool nf_flow_has_stale_dst(struct flow_offload *flow)
--{
--	return flow_offload_stale_dst(&flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple) ||
--	       flow_offload_stale_dst(&flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].tuple);
--}
--
- static void nf_flow_offload_gc_step(struct flow_offload *flow, void *data)
- {
- 	struct nf_flowtable *flow_table = data;
- 
- 	if (nf_flow_has_expired(flow) ||
--	    nf_ct_is_dying(flow->ct) ||
--	    nf_flow_has_stale_dst(flow))
-+	    nf_ct_is_dying(flow->ct))
- 		set_bit(NF_FLOW_TEARDOWN, &flow->flags);
- 
- 	if (test_bit(NF_FLOW_TEARDOWN, &flow->flags)) {
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -229,6 +229,15 @@ static bool nf_flow_exceeds_mtu(const st
- 	return true;
- }
- 
-+static inline bool nf_flow_dst_check(struct flow_offload_tuple *tuple)
-+{
-+	if (tuple->xmit_type != FLOW_OFFLOAD_XMIT_NEIGH &&
-+	    tuple->xmit_type != FLOW_OFFLOAD_XMIT_XFRM)
-+		return true;
-+
-+	return dst_check(tuple->dst_cache, tuple->dst_cookie);
-+}
-+
- static unsigned int nf_flow_xmit_xfrm(struct sk_buff *skb,
- 				      const struct nf_hook_state *state,
- 				      struct dst_entry *dst)
-@@ -364,6 +373,11 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	if (nf_flow_state_check(flow, iph->protocol, skb, thoff))
- 		return NF_ACCEPT;
- 
-+	if (!nf_flow_dst_check(&tuplehash->tuple)) {
-+		flow_offload_teardown(flow);
-+		return NF_ACCEPT;
-+	}
-+
- 	if (skb_try_make_writable(skb, thoff + hdrsize))
- 		return NF_DROP;
- 
-@@ -600,6 +614,11 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 	if (nf_flow_state_check(flow, ip6h->nexthdr, skb, thoff))
- 		return NF_ACCEPT;
- 
-+	if (!nf_flow_dst_check(&tuplehash->tuple)) {
-+		flow_offload_teardown(flow);
-+		return NF_ACCEPT;
-+	}
-+
- 	if (skb_try_make_writable(skb, thoff + hdrsize))
- 		return NF_DROP;
- 
diff --git a/target/linux/generic/backport-5.10/611-v5.12-net-ethernet-mediatek-support-setting-MTU.patch b/target/linux/generic/backport-5.10/611-v5.12-net-ethernet-mediatek-support-setting-MTU.patch
deleted file mode 100644
index a2c407f7c85d..000000000000
--- a/target/linux/generic/backport-5.10/611-v5.12-net-ethernet-mediatek-support-setting-MTU.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From 4fd59792097a6b2fb949d41264386a7ecade469e Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Mon, 25 Jan 2021 12:20:46 +0800
-Subject: [PATCH] net: ethernet: mediatek: support setting MTU
-
-MT762x HW, except for MT7628, supports frame length up to 2048
-(maximum length on GDM), so allow setting MTU up to 2030.
-
-Also set the default frame length to the hardware default 1518.
-
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20210125042046.5599-1-dqfext@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 43 ++++++++++++++++++---
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 12 ++++--
- 2 files changed, 47 insertions(+), 8 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -355,7 +355,7 @@ static void mtk_mac_config(struct phylin
- 	/* Setup gmac */
- 	mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
- 	mcr_new = mcr_cur;
--	mcr_new |= MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
-+	mcr_new |= MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
- 		   MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK |
- 		   MAC_MCR_RX_FIFO_CLR_DIS;
- 
-@@ -783,8 +783,8 @@ static void mtk_get_stats64(struct net_d
- static inline int mtk_max_frag_size(int mtu)
- {
- 	/* make sure buf_size will be at least MTK_MAX_RX_LENGTH */
--	if (mtu + MTK_RX_ETH_HLEN < MTK_MAX_RX_LENGTH)
--		mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN;
-+	if (mtu + MTK_RX_ETH_HLEN < MTK_MAX_RX_LENGTH_2K)
-+		mtu = MTK_MAX_RX_LENGTH_2K - MTK_RX_ETH_HLEN;
- 
- 	return SKB_DATA_ALIGN(MTK_RX_HLEN + mtu) +
- 		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-@@ -795,7 +795,7 @@ static inline int mtk_max_buf_size(int f
- 	int buf_size = frag_size - NET_SKB_PAD - NET_IP_ALIGN -
- 		       SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
- 
--	WARN_ON(buf_size < MTK_MAX_RX_LENGTH);
-+	WARN_ON(buf_size < MTK_MAX_RX_LENGTH_2K);
- 
- 	return buf_size;
- }
-@@ -2631,6 +2631,35 @@ static void mtk_uninit(struct net_device
- 	mtk_rx_irq_disable(eth, ~0);
- }
- 
-+static int mtk_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+	int length = new_mtu + MTK_RX_ETH_HLEN;
-+	struct mtk_mac *mac = netdev_priv(dev);
-+	struct mtk_eth *eth = mac->hw;
-+	u32 mcr_cur, mcr_new;
-+
-+	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
-+		mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
-+		mcr_new = mcr_cur & ~MAC_MCR_MAX_RX_MASK;
-+
-+		if (length <= 1518)
-+			mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1518);
-+		else if (length <= 1536)
-+			mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1536);
-+		else if (length <= 1552)
-+			mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1552);
-+		else
-+			mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_2048);
-+
-+		if (mcr_new != mcr_cur)
-+			mtk_w32(mac->hw, mcr_new, MTK_MAC_MCR(mac->id));
-+	}
-+
-+	dev->mtu = new_mtu;
-+
-+	return 0;
-+}
-+
- static int mtk_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- {
- 	struct mtk_mac *mac = netdev_priv(dev);
-@@ -2927,6 +2956,7 @@ static const struct net_device_ops mtk_n
- 	.ndo_set_mac_address	= mtk_set_mac_address,
- 	.ndo_validate_addr	= eth_validate_addr,
- 	.ndo_do_ioctl		= mtk_do_ioctl,
-+	.ndo_change_mtu		= mtk_change_mtu,
- 	.ndo_tx_timeout		= mtk_tx_timeout,
- 	.ndo_get_stats64        = mtk_get_stats64,
- 	.ndo_fix_features	= mtk_fix_features,
-@@ -3029,7 +3059,10 @@ static int mtk_add_mac(struct mtk_eth *e
- 	eth->netdev[id]->irq = eth->irq[0];
- 	eth->netdev[id]->dev.of_node = np;
- 
--	eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN;
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628))
-+		eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN;
-+	else
-+		eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH_2K - MTK_RX_ETH_HLEN;
- 
- 	return 0;
- 
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -20,12 +20,13 @@
- #include "mtk_ppe.h"
- 
- #define MTK_QDMA_PAGE_SIZE	2048
--#define	MTK_MAX_RX_LENGTH	1536
-+#define MTK_MAX_RX_LENGTH	1536
-+#define MTK_MAX_RX_LENGTH_2K	2048
- #define MTK_TX_DMA_BUF_LEN	0x3fff
- #define MTK_DMA_SIZE		512
- #define MTK_NAPI_WEIGHT		64
- #define MTK_MAC_COUNT		2
--#define MTK_RX_ETH_HLEN		(VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
-+#define MTK_RX_ETH_HLEN		(ETH_HLEN + ETH_FCS_LEN)
- #define MTK_RX_HLEN		(NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN)
- #define MTK_DMA_DUMMY_DESC	0xffffffff
- #define MTK_DEFAULT_MSG_ENABLE	(NETIF_MSG_DRV | \
-@@ -352,7 +353,12 @@
- 
- /* Mac control registers */
- #define MTK_MAC_MCR(x)		(0x10100 + (x * 0x100))
--#define MAC_MCR_MAX_RX_1536	BIT(24)
-+#define MAC_MCR_MAX_RX_MASK	GENMASK(25, 24)
-+#define MAC_MCR_MAX_RX(_x)	(MAC_MCR_MAX_RX_MASK & ((_x) << 24))
-+#define MAC_MCR_MAX_RX_1518	0x0
-+#define MAC_MCR_MAX_RX_1536	0x1
-+#define MAC_MCR_MAX_RX_1552	0x2
-+#define MAC_MCR_MAX_RX_2048	0x3
- #define MAC_MCR_IPG_CFG		(BIT(18) | BIT(16))
- #define MAC_MCR_FORCE_MODE	BIT(15)
- #define MAC_MCR_TX_EN		BIT(14)
diff --git a/target/linux/generic/backport-5.10/612-v5.15-netfilter-conntrack-sanitize-table-size-default-sett.patch b/target/linux/generic/backport-5.10/612-v5.15-netfilter-conntrack-sanitize-table-size-default-sett.patch
deleted file mode 100644
index 55bf0f612bdb..000000000000
--- a/target/linux/generic/backport-5.10/612-v5.15-netfilter-conntrack-sanitize-table-size-default-sett.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From d532bcd0b2699d84d71a0c71d37157ac6eb3be25 Mon Sep 17 00:00:00 2001
-Message-Id: <d532bcd0b2699d84d71a0c71d37157ac6eb3be25.1645246598.git.plr.vincent@gmail.com>
-From: Florian Westphal <fw@strlen.de>
-Date: Thu, 26 Aug 2021 15:54:19 +0200
-Subject: [PATCH] netfilter: conntrack: sanitize table size default settings
-
-conntrack has two distinct table size settings:
-nf_conntrack_max and nf_conntrack_buckets.
-
-The former limits how many conntrack objects are allowed to exist
-in each namespace.
-
-The second sets the size of the hashtable.
-
-As all entries are inserted twice (once for original direction, once for
-reply), there should be at least twice as many buckets in the table than
-the maximum number of conntrack objects that can exist at the same time.
-
-Change the default multiplier to 1 and increase the chosen bucket sizes.
-This results in the same nf_conntrack_max settings as before but reduces
-the average bucket list length.
-
-Signed-off-by: Florian Westphal <fw@strlen.de>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
- .../networking/nf_conntrack-sysctl.rst        | 13 ++++----
- net/netfilter/nf_conntrack_core.c             | 30 +++++++++----------
- 2 files changed, 22 insertions(+), 21 deletions(-)
-
---- a/Documentation/networking/nf_conntrack-sysctl.rst
-+++ b/Documentation/networking/nf_conntrack-sysctl.rst
-@@ -17,9 +17,8 @@ nf_conntrack_acct - BOOLEAN
- nf_conntrack_buckets - INTEGER
- 	Size of hash table. If not specified as parameter during module
- 	loading, the default size is calculated by dividing total memory
--	by 16384 to determine the number of buckets but the hash table will
--	never have fewer than 32 and limited to 16384 buckets. For systems
--	with more than 4GB of memory it will be 65536 buckets.
-+	by 16384 to determine the number of buckets. The hash table will
-+	never have fewer than 1024 and never more than 262144 buckets.
- 	This sysctl is only writeable in the initial net namespace.
- 
- nf_conntrack_checksum - BOOLEAN
-@@ -100,8 +99,12 @@ nf_conntrack_log_invalid - INTEGER
- 	Log invalid packets of a type specified by value.
- 
- nf_conntrack_max - INTEGER
--	Size of connection tracking table.  Default value is
--	nf_conntrack_buckets value * 4.
-+        Maximum number of allowed connection tracking entries. This value is set
-+        to nf_conntrack_buckets by default.
-+        Note that connection tracking entries are added to the table twice -- once
-+        for the original direction and once for the reply direction (i.e., with
-+        the reversed address). This means that with default settings a maxed-out
-+        table will have a average hash chain length of 2, not 1.
- 
- nf_conntrack_tcp_be_liberal - BOOLEAN
- 	- 0 - disabled (default)
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -2575,26 +2575,24 @@ int nf_conntrack_init_start(void)
- 		spin_lock_init(&nf_conntrack_locks[i]);
- 
- 	if (!nf_conntrack_htable_size) {
--		/* Idea from tcp.c: use 1/16384 of memory.
--		 * On i386: 32MB machine has 512 buckets.
--		 * >= 1GB machines have 16384 buckets.
--		 * >= 4GB machines have 65536 buckets.
--		 */
- 		nf_conntrack_htable_size
- 			= (((nr_pages << PAGE_SHIFT) / 16384)
- 			   / sizeof(struct hlist_head));
--		if (nr_pages > (4 * (1024 * 1024 * 1024 / PAGE_SIZE)))
--			nf_conntrack_htable_size = 65536;
-+		if (BITS_PER_LONG >= 64 &&
-+		    nr_pages > (4 * (1024 * 1024 * 1024 / PAGE_SIZE)))
-+			nf_conntrack_htable_size = 262144;
- 		else if (nr_pages > (1024 * 1024 * 1024 / PAGE_SIZE))
--			nf_conntrack_htable_size = 16384;
--		if (nf_conntrack_htable_size < 32)
--			nf_conntrack_htable_size = 32;
-+			nf_conntrack_htable_size = 65536;
- 
--		/* Use a max. factor of four by default to get the same max as
--		 * with the old struct list_heads. When a table size is given
--		 * we use the old value of 8 to avoid reducing the max.
--		 * entries. */
--		max_factor = 4;
-+		if (nf_conntrack_htable_size < 1024)
-+			nf_conntrack_htable_size = 1024;
-+		/* Use a max. factor of one by default to keep the average
-+		 * hash chain length at 2 entries.  Each entry has to be added
-+		 * twice (once for original direction, once for reply).
-+		 * When a table size is given we use the old value of 8 to
-+		 * avoid implicit reduction of the max entries setting.
-+		 */
-+		max_factor = 1;
- 	}
- 
- 	nf_conntrack_hash = nf_ct_alloc_hashtable(&nf_conntrack_htable_size, 1);
diff --git a/target/linux/generic/backport-5.10/613-v5.15-01-netfilter-flowtable-remove-nf_ct_l4proto_find-call.patch b/target/linux/generic/backport-5.10/613-v5.15-01-netfilter-flowtable-remove-nf_ct_l4proto_find-call.patch
deleted file mode 100644
index 72accec50c05..000000000000
--- a/target/linux/generic/backport-5.10/613-v5.15-01-netfilter-flowtable-remove-nf_ct_l4proto_find-call.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 92fb15513edc6ae1eb51f717e70d4d3d538c2d09 Mon Sep 17 00:00:00 2001
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Mon, 19 Jul 2021 18:04:01 +0200
-Subject: [PATCH] netfilter: flowtable: remove nf_ct_l4proto_find() call
-
-TCP and UDP are built-in conntrack protocol trackers and the flowtable
-only supports for TCP and UDP, remove this call.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
- net/netfilter/nf_flow_table_core.c | 10 ----------
- 1 file changed, 10 deletions(-)
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -180,15 +180,10 @@ static void flow_offload_fixup_tcp(struc
- 
- static void flow_offload_fixup_ct_timeout(struct nf_conn *ct)
- {
--	const struct nf_conntrack_l4proto *l4proto;
- 	struct net *net = nf_ct_net(ct);
- 	int l4num = nf_ct_protonum(ct);
- 	unsigned int timeout;
- 
--	l4proto = nf_ct_l4proto_find(l4num);
--	if (!l4proto)
--		return;
--
- 	if (l4num == IPPROTO_TCP) {
- 		struct nf_tcp_net *tn = nf_tcp_pernet(net);
- 
-@@ -273,15 +268,10 @@ static const struct rhashtable_params nf
- 
- unsigned long flow_offload_get_timeout(struct flow_offload *flow)
- {
--	const struct nf_conntrack_l4proto *l4proto;
- 	unsigned long timeout = NF_FLOW_TIMEOUT;
- 	struct net *net = nf_ct_net(flow->ct);
- 	int l4num = nf_ct_protonum(flow->ct);
- 
--	l4proto = nf_ct_l4proto_find(l4num);
--	if (!l4proto)
--		return timeout;
--
- 	if (l4num == IPPROTO_TCP) {
- 		struct nf_tcp_net *tn = nf_tcp_pernet(net);
- 
diff --git a/target/linux/generic/backport-5.10/613-v5.15-02-netfilter-conntrack-remove-offload_pickup-sysctl-aga.patch b/target/linux/generic/backport-5.10/613-v5.15-02-netfilter-conntrack-remove-offload_pickup-sysctl-aga.patch
deleted file mode 100644
index 71266c8a7009..000000000000
--- a/target/linux/generic/backport-5.10/613-v5.15-02-netfilter-conntrack-remove-offload_pickup-sysctl-aga.patch
+++ /dev/null
@@ -1,184 +0,0 @@
-From 4592ee7f525c4683ec9e290381601fdee50ae110 Mon Sep 17 00:00:00 2001
-From: Florian Westphal <fw@strlen.de>
-Date: Wed, 4 Aug 2021 15:02:15 +0200
-Subject: [PATCH] netfilter: conntrack: remove offload_pickup sysctl again
-
-These two sysctls were added because the hardcoded defaults (2 minutes,
-tcp, 30 seconds, udp) turned out to be too low for some setups.
-
-They appeared in 5.14-rc1 so it should be fine to remove it again.
-
-Marcelo convinced me that there should be no difference between a flow
-that was offloaded vs. a flow that was not wrt. timeout handling.
-Thus the default is changed to those for TCP established and UDP stream,
-5 days and 120 seconds, respectively.
-
-Marcelo also suggested to account for the timeout value used for the
-offloading, this avoids increase beyond the value in the conntrack-sysctl
-and will also instantly expire the conntrack entry with altered sysctls.
-
-Example:
-   nf_conntrack_udp_timeout_stream=60
-   nf_flowtable_udp_timeout=60
-
-This will remove offloaded udp flows after one minute, rather than two.
-
-An earlier version of this patch also cleared the ASSURED bit to
-allow nf_conntrack to evict the entry via early_drop (i.e., table full).
-However, it looks like we can safely assume that connection timed out
-via HW is still in established state, so this isn't needed.
-
-Quoting Oz:
- [..] the hardware sends all packets with a set FIN flags to sw.
- [..] Connections that are aged in hardware are expected to be in the
- established state.
-
-In case it turns out that back-to-sw-path transition can occur for
-'dodgy' connections too (e.g., one side disappeared while software-path
-would have been in RETRANS timeout), we can adjust this later.
-
-Cc: Oz Shlomo <ozsh@nvidia.com>
-Cc: Paul Blakey <paulb@nvidia.com>
-Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
-Signed-off-by: Florian Westphal <fw@strlen.de>
-Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
-Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
- Documentation/networking/nf_conntrack-sysctl.rst | 10 ----------
- include/net/netns/conntrack.h                    |  2 --
- net/netfilter/nf_conntrack_proto_tcp.c           |  1 -
- net/netfilter/nf_conntrack_proto_udp.c           |  1 -
- net/netfilter/nf_conntrack_standalone.c          | 16 ----------------
- net/netfilter/nf_flow_table_core.c               | 11 ++++++++---
- 6 files changed, 8 insertions(+), 33 deletions(-)
-
---- a/include/net/netns/conntrack.h
-+++ b/include/net/netns/conntrack.h
-@@ -29,7 +29,6 @@ struct nf_tcp_net {
- 	int tcp_max_retrans;
- #if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
- 	unsigned int offload_timeout;
--	unsigned int offload_pickup;
- #endif
- };
- 
-@@ -43,7 +42,6 @@ struct nf_udp_net {
- 	unsigned int timeouts[UDP_CT_MAX];
- #if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
- 	unsigned int offload_timeout;
--	unsigned int offload_pickup;
- #endif
- };
- 
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -1460,7 +1460,6 @@ void nf_conntrack_tcp_init_net(struct ne
- 
- #if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
- 	tn->offload_timeout = 30 * HZ;
--	tn->offload_pickup = 120 * HZ;
- #endif
- }
- 
---- a/net/netfilter/nf_conntrack_proto_udp.c
-+++ b/net/netfilter/nf_conntrack_proto_udp.c
-@@ -276,7 +276,6 @@ void nf_conntrack_udp_init_net(struct ne
- 
- #if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
- 	un->offload_timeout = 30 * HZ;
--	un->offload_pickup = 30 * HZ;
- #endif
- }
- 
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -569,7 +569,6 @@ enum nf_ct_sysctl_index {
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_UNACK,
- #if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD,
--	NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD_PICKUP,
- #endif
- 	NF_SYSCTL_CT_PROTO_TCP_LOOSE,
- 	NF_SYSCTL_CT_PROTO_TCP_LIBERAL,
-@@ -578,7 +577,6 @@ enum nf_ct_sysctl_index {
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_STREAM,
- #if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD,
--	NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD_PICKUP,
- #endif
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_ICMP,
- 	NF_SYSCTL_CT_PROTO_TIMEOUT_ICMPV6,
-@@ -772,12 +770,6 @@ static struct ctl_table nf_ct_sysctl_tab
- 		.mode		= 0644,
- 		.proc_handler	= proc_dointvec_jiffies,
- 	},
--	[NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD_PICKUP] = {
--		.procname	= "nf_flowtable_tcp_pickup",
--		.maxlen		= sizeof(unsigned int),
--		.mode		= 0644,
--		.proc_handler	= proc_dointvec_jiffies,
--	},
- #endif
- 	[NF_SYSCTL_CT_PROTO_TCP_LOOSE] = {
- 		.procname	= "nf_conntrack_tcp_loose",
-@@ -820,12 +812,6 @@ static struct ctl_table nf_ct_sysctl_tab
- 		.mode		= 0644,
- 		.proc_handler	= proc_dointvec_jiffies,
- 	},
--	[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD_PICKUP] = {
--		.procname	= "nf_flowtable_udp_pickup",
--		.maxlen		= sizeof(unsigned int),
--		.mode		= 0644,
--		.proc_handler	= proc_dointvec_jiffies,
--	},
- #endif
- 	[NF_SYSCTL_CT_PROTO_TIMEOUT_ICMP] = {
- 		.procname	= "nf_conntrack_icmp_timeout",
-@@ -999,7 +985,6 @@ static void nf_conntrack_standalone_init
- 
- #if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
- 	table[NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD].data = &tn->offload_timeout;
--	table[NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD_PICKUP].data = &tn->offload_pickup;
- #endif
- 
- }
-@@ -1090,7 +1075,6 @@ static int nf_conntrack_standalone_init_
- 	table[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_STREAM].data = &un->timeouts[UDP_CT_REPLIED];
- #if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
- 	table[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD].data = &un->offload_timeout;
--	table[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD_PICKUP].data = &un->offload_pickup;
- #endif
- 
- 	nf_conntrack_standalone_init_tcp_sysctl(net, table);
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -182,20 +182,25 @@ static void flow_offload_fixup_ct_timeou
- {
- 	struct net *net = nf_ct_net(ct);
- 	int l4num = nf_ct_protonum(ct);
--	unsigned int timeout;
-+	s32 timeout;
- 
- 	if (l4num == IPPROTO_TCP) {
- 		struct nf_tcp_net *tn = nf_tcp_pernet(net);
- 
--		timeout = tn->offload_pickup;
-+		timeout = tn->timeouts[TCP_CONNTRACK_ESTABLISHED];
-+		timeout -= tn->offload_timeout;
- 	} else if (l4num == IPPROTO_UDP) {
- 		struct nf_udp_net *tn = nf_udp_pernet(net);
- 
--		timeout = tn->offload_pickup;
-+		timeout = tn->timeouts[UDP_CT_REPLIED];
-+		timeout -= tn->offload_timeout;
- 	} else {
- 		return;
- 	}
- 
-+	if (timeout < 0)
-+		timeout = 0;
-+
- 	if (nf_flow_timeout_delta(READ_ONCE(ct->timeout)) > (__s32)timeout)
- 		WRITE_ONCE(ct->timeout, nfct_time_stamp + timeout);
- }
diff --git a/target/linux/generic/backport-5.10/614-v5.18-netfilter-flowtable-fix-TCP-flow-teardown.patch b/target/linux/generic/backport-5.10/614-v5.18-netfilter-flowtable-fix-TCP-flow-teardown.patch
deleted file mode 100644
index 1b422ca4afae..000000000000
--- a/target/linux/generic/backport-5.10/614-v5.18-netfilter-flowtable-fix-TCP-flow-teardown.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-From b8835ba8c029b5c9ada5666754526c2b00f7ea80 Mon Sep 17 00:00:00 2001
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Tue, 17 May 2022 10:44:14 +0200
-Subject: netfilter: flowtable: fix TCP flow teardown
-
-[ Upstream commit e5eaac2beb54f0a16ff851125082d9faeb475572 ]
-
-This patch addresses three possible problems:
-
-1. ct gc may race to undo the timeout adjustment of the packet path, leaving
-   the conntrack entry in place with the internal offload timeout (one day).
-
-2. ct gc removes the ct because the IPS_OFFLOAD_BIT is not set and the CLOSE
-   timeout is reached before the flow offload del.
-
-3. tcp ct is always set to ESTABLISHED with a very long timeout
-   in flow offload teardown/delete even though the state might be already
-   CLOSED. Also as a remark we cannot assume that the FIN or RST packet
-   is hitting flow table teardown as the packet might get bumped to the
-   slow path in nftables.
-
-This patch resets IPS_OFFLOAD_BIT from flow_offload_teardown(), so
-conntrack handles the tcp rst/fin packet which triggers the CLOSE/FIN
-state transition.
-
-Moreover, teturn the connection's ownership to conntrack upon teardown
-by clearing the offload flag and fixing the established timeout value.
-The flow table GC thread will asynchonrnously free the flow table and
-hardware offload entries.
-
-Before this patch, the IPS_OFFLOAD_BIT remained set for expired flows on
-which is also misleading since the flow is back to classic conntrack
-path.
-
-If nf_ct_delete() removes the entry from the conntrack table, then it
-calls nf_ct_put() which decrements the refcnt. This is not a problem
-because the flowtable holds a reference to the conntrack object from
-flow_offload_alloc() path which is released via flow_offload_free().
-
-This patch also updates nft_flow_offload to skip packets in SYN_RECV
-state. Since we might miss or bump packets to slow path, we do not know
-what will happen there while we are still in SYN_RECV, this patch
-postpones offload up to the next packet which also aligns to the
-existing behaviour in tc-ct.
-
-flow_offload_teardown() does not reset the existing tcp state from
-flow_offload_fixup_tcp() to ESTABLISHED anymore, packets bump to slow
-path might have already update the state to CLOSE/FIN.
-
-Joint work with Oz and Sven.
-
-Fixes: 1e5b2471bcc4 ("netfilter: nf_flow_table: teardown flow timeout race")
-Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
-Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-Signed-off-by: Sasha Levin <sashal@kernel.org>
----
- net/netfilter/nf_flow_table_core.c | 33 +++++++-----------------------
- net/netfilter/nft_flow_offload.c   |  3 ++-
- 2 files changed, 9 insertions(+), 27 deletions(-)
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -173,12 +173,11 @@ EXPORT_SYMBOL_GPL(flow_offload_route_ini
- 
- static void flow_offload_fixup_tcp(struct ip_ct_tcp *tcp)
- {
--	tcp->state = TCP_CONNTRACK_ESTABLISHED;
- 	tcp->seen[0].td_maxwin = 0;
- 	tcp->seen[1].td_maxwin = 0;
- }
- 
--static void flow_offload_fixup_ct_timeout(struct nf_conn *ct)
-+static void flow_offload_fixup_ct(struct nf_conn *ct)
- {
- 	struct net *net = nf_ct_net(ct);
- 	int l4num = nf_ct_protonum(ct);
-@@ -187,7 +186,9 @@ static void flow_offload_fixup_ct_timeou
- 	if (l4num == IPPROTO_TCP) {
- 		struct nf_tcp_net *tn = nf_tcp_pernet(net);
- 
--		timeout = tn->timeouts[TCP_CONNTRACK_ESTABLISHED];
-+		flow_offload_fixup_tcp(&ct->proto.tcp);
-+
-+		timeout = tn->timeouts[ct->proto.tcp.state];
- 		timeout -= tn->offload_timeout;
- 	} else if (l4num == IPPROTO_UDP) {
- 		struct nf_udp_net *tn = nf_udp_pernet(net);
-@@ -205,18 +206,6 @@ static void flow_offload_fixup_ct_timeou
- 		WRITE_ONCE(ct->timeout, nfct_time_stamp + timeout);
- }
- 
--static void flow_offload_fixup_ct_state(struct nf_conn *ct)
--{
--	if (nf_ct_protonum(ct) == IPPROTO_TCP)
--		flow_offload_fixup_tcp(&ct->proto.tcp);
--}
--
--static void flow_offload_fixup_ct(struct nf_conn *ct)
--{
--	flow_offload_fixup_ct_state(ct);
--	flow_offload_fixup_ct_timeout(ct);
--}
--
- static void flow_offload_route_release(struct flow_offload *flow)
- {
- 	nft_flow_dst_release(flow, FLOW_OFFLOAD_DIR_ORIGINAL);
-@@ -353,22 +342,14 @@ static void flow_offload_del(struct nf_f
- 	rhashtable_remove_fast(&flow_table->rhashtable,
- 			       &flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].node,
- 			       nf_flow_offload_rhash_params);
--
--	clear_bit(IPS_OFFLOAD_BIT, &flow->ct->status);
--
--	if (nf_flow_has_expired(flow))
--		flow_offload_fixup_ct(flow->ct);
--	else
--		flow_offload_fixup_ct_timeout(flow->ct);
--
- 	flow_offload_free(flow);
- }
- 
- void flow_offload_teardown(struct flow_offload *flow)
- {
-+	clear_bit(IPS_OFFLOAD_BIT, &flow->ct->status);
- 	set_bit(NF_FLOW_TEARDOWN, &flow->flags);
--
--	flow_offload_fixup_ct_state(flow->ct);
-+	flow_offload_fixup_ct(flow->ct);
- }
- EXPORT_SYMBOL_GPL(flow_offload_teardown);
- 
-@@ -437,7 +418,7 @@ static void nf_flow_offload_gc_step(stru
- 
- 	if (nf_flow_has_expired(flow) ||
- 	    nf_ct_is_dying(flow->ct))
--		set_bit(NF_FLOW_TEARDOWN, &flow->flags);
-+		flow_offload_teardown(flow);
- 
- 	if (test_bit(NF_FLOW_TEARDOWN, &flow->flags)) {
- 		if (test_bit(NF_FLOW_HW, &flow->flags)) {
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -268,6 +268,12 @@ static bool nft_flow_offload_skip(struct
- 	return false;
- }
- 
-+static bool nf_conntrack_tcp_established(const struct nf_conn *ct)
-+{
-+	return ct->proto.tcp.state == TCP_CONNTRACK_ESTABLISHED &&
-+	       test_bit(IPS_ASSURED_BIT, &ct->status);
-+}
-+
- static void nft_flow_offload_eval(const struct nft_expr *expr,
- 				  struct nft_regs *regs,
- 				  const struct nft_pktinfo *pkt)
-@@ -293,7 +299,8 @@ static void nft_flow_offload_eval(const
- 	case IPPROTO_TCP:
- 		tcph = skb_header_pointer(pkt->skb, pkt->xt.thoff,
- 					  sizeof(_tcph), &_tcph);
--		if (unlikely(!tcph || tcph->fin || tcph->rst))
-+		if (unlikely(!tcph || tcph->fin || tcph->rst ||
-+			     !nf_conntrack_tcp_established(ct)))
- 			goto out;
- 		break;
- 	case IPPROTO_UDP:
diff --git a/target/linux/generic/backport-5.10/615-v5.14-ip-Treat-IPv4-segment-s-lowest-address-as-unicast.patch b/target/linux/generic/backport-5.10/615-v5.14-ip-Treat-IPv4-segment-s-lowest-address-as-unicast.patch
deleted file mode 100644
index 76e50d15eb29..000000000000
--- a/target/linux/generic/backport-5.10/615-v5.14-ip-Treat-IPv4-segment-s-lowest-address-as-unicast.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 94c821c74bf5fe0c25e09df5334a16f98608db90 Mon Sep 17 00:00:00 2001
-From: Seth David Schoen <schoen@loyalty.org>
-Date: Wed, 12 May 2021 21:37:49 -0700
-Subject: [PATCH] ip: Treat IPv4 segment's lowest address as unicast
-
-Treat only the highest, not the lowest, IPv4 address within a local
-subnet as a broadcast address.
-
-Signed-off-by: Seth David Schoen <schoen@loyalty.org>
-Suggested-by: John Gilmore <gnu@toad.com>
-Acked-by: Dave Taht <dave.taht@gmail.com>
-Reviewed-by: David Ahern <dsahern@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=94c821c74bf5
----
- net/ipv4/fib_frontend.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/net/ipv4/fib_frontend.c
-+++ b/net/ipv4/fib_frontend.c
-@@ -1132,10 +1132,8 @@ void fib_add_ifaddr(struct in_ifaddr *if
- 				  prefix, ifa->ifa_prefixlen, prim,
- 				  ifa->ifa_rt_priority);
- 
--		/* Add network specific broadcasts, when it takes a sense */
-+		/* Add the network broadcast address, when it makes sense */
- 		if (ifa->ifa_prefixlen < 31) {
--			fib_magic(RTM_NEWROUTE, RTN_BROADCAST, prefix, 32,
--				  prim, 0);
- 			fib_magic(RTM_NEWROUTE, RTN_BROADCAST, prefix | ~mask,
- 				  32, prim, 0);
- 			arp_invalidate(dev, prefix | ~mask, false);
diff --git a/target/linux/generic/backport-5.10/630-v5.15-page_pool_frag_support.patch b/target/linux/generic/backport-5.10/630-v5.15-page_pool_frag_support.patch
deleted file mode 100644
index dad4803848a4..000000000000
--- a/target/linux/generic/backport-5.10/630-v5.15-page_pool_frag_support.patch
+++ /dev/null
@@ -1,798 +0,0 @@
---- a/include/net/page_pool.h
-+++ b/include/net/page_pool.h
-@@ -45,7 +45,10 @@
- 					* Please note DMA-sync-for-CPU is still
- 					* device driver responsibility
- 					*/
--#define PP_FLAG_ALL		(PP_FLAG_DMA_MAP | PP_FLAG_DMA_SYNC_DEV)
-+#define PP_FLAG_PAGE_FRAG	BIT(2) /* for page frag feature */
-+#define PP_FLAG_ALL		(PP_FLAG_DMA_MAP |\
-+				 PP_FLAG_DMA_SYNC_DEV |\
-+				 PP_FLAG_PAGE_FRAG)
- 
- /*
-  * Fast allocation side cache array/stack
-@@ -65,7 +68,7 @@
- #define PP_ALLOC_CACHE_REFILL	64
- struct pp_alloc_cache {
- 	u32 count;
--	void *cache[PP_ALLOC_CACHE_SIZE];
-+	struct page *cache[PP_ALLOC_CACHE_SIZE];
- };
- 
- struct page_pool_params {
-@@ -79,6 +82,22 @@ struct page_pool_params {
- 	unsigned int	offset;  /* DMA addr offset */
- };
- 
-+
-+static inline int page_pool_ethtool_stats_get_count(void)
-+{
-+	return 0;
-+}
-+
-+static inline u8 *page_pool_ethtool_stats_get_strings(u8 *data)
-+{
-+	return data;
-+}
-+
-+static inline u64 *page_pool_ethtool_stats_get(u64 *data, void *stats)
-+{
-+	return data;
-+}
-+
- struct page_pool {
- 	struct page_pool_params p;
- 
-@@ -88,6 +107,9 @@ struct page_pool {
- 	unsigned long defer_warn;
- 
- 	u32 pages_state_hold_cnt;
-+	unsigned int frag_offset;
-+	struct page *frag_page;
-+	long frag_users;
- 
- 	/*
- 	 * Data structure for allocation side
-@@ -137,6 +159,18 @@ static inline struct page *page_pool_dev
- 	return page_pool_alloc_pages(pool, gfp);
- }
- 
-+struct page *page_pool_alloc_frag(struct page_pool *pool, unsigned int *offset,
-+				  unsigned int size, gfp_t gfp);
-+
-+static inline struct page *page_pool_dev_alloc_frag(struct page_pool *pool,
-+						    unsigned int *offset,
-+						    unsigned int size)
-+{
-+	gfp_t gfp = (GFP_ATOMIC | __GFP_NOWARN);
-+
-+	return page_pool_alloc_frag(pool, offset, size, gfp);
-+}
-+
- /* get the stored dma direction. A driver might decide to treat this locally and
-  * avoid the extra cache line from page_pool to determine the direction
-  */
-@@ -146,6 +180,8 @@ inline enum dma_data_direction page_pool
- 	return pool->p.dma_dir;
- }
- 
-+bool page_pool_return_skb_page(struct page *page);
-+
- struct page_pool *page_pool_create(const struct page_pool_params *params);
- 
- #ifdef CONFIG_PAGE_POOL
-@@ -165,6 +201,7 @@ static inline void page_pool_release_pag
- 					  struct page *page)
- {
- }
-+
- #endif
- 
- void page_pool_put_page(struct page_pool *pool, struct page *page,
-@@ -189,19 +226,48 @@ static inline void page_pool_recycle_dir
- 	page_pool_put_full_page(pool, page, true);
- }
- 
-+#define PAGE_POOL_DMA_USE_PP_FRAG_COUNT	\
-+		(sizeof(dma_addr_t) > sizeof(unsigned long))
-+
- static inline dma_addr_t page_pool_get_dma_addr(struct page *page)
- {
--	dma_addr_t ret = page->dma_addr[0];
--	if (sizeof(dma_addr_t) > sizeof(unsigned long))
--		ret |= (dma_addr_t)page->dma_addr[1] << 16 << 16;
-+	dma_addr_t ret = page->dma_addr;
-+
-+	if (PAGE_POOL_DMA_USE_PP_FRAG_COUNT)
-+		ret |= (dma_addr_t)page->dma_addr_upper << 16 << 16;
-+
- 	return ret;
- }
- 
- static inline void page_pool_set_dma_addr(struct page *page, dma_addr_t addr)
- {
--	page->dma_addr[0] = addr;
--	if (sizeof(dma_addr_t) > sizeof(unsigned long))
--		page->dma_addr[1] = upper_32_bits(addr);
-+	page->dma_addr = addr;
-+	if (PAGE_POOL_DMA_USE_PP_FRAG_COUNT)
-+		page->dma_addr_upper = upper_32_bits(addr);
-+}
-+
-+static inline void page_pool_set_frag_count(struct page *page, long nr)
-+{
-+	atomic_long_set(&page->pp_frag_count, nr);
-+}
-+
-+static inline long page_pool_atomic_sub_frag_count_return(struct page *page,
-+							  long nr)
-+{
-+	long ret;
-+
-+	/* As suggested by Alexander, atomic_long_read() may cover up the
-+	 * reference count errors, so avoid calling atomic_long_read() in
-+	 * the cases of freeing or draining the page_frags, where we would
-+	 * not expect it to match or that are slowpath anyway.
-+	 */
-+	if (__builtin_constant_p(nr) &&
-+	    atomic_long_read(&page->pp_frag_count) == nr)
-+		return 0;
-+
-+	ret = atomic_long_sub_return(nr, &page->pp_frag_count);
-+	WARN_ON(ret < 0);
-+	return ret;
- }
- 
- static inline bool is_page_pool_compiled_in(void)
-@@ -225,4 +291,23 @@ static inline void page_pool_nid_changed
- 	if (unlikely(pool->p.nid != new_nid))
- 		page_pool_update_nid(pool, new_nid);
- }
-+
-+static inline void page_pool_ring_lock(struct page_pool *pool)
-+	__acquires(&pool->ring.producer_lock)
-+{
-+	if (in_serving_softirq())
-+		spin_lock(&pool->ring.producer_lock);
-+	else
-+		spin_lock_bh(&pool->ring.producer_lock);
-+}
-+
-+static inline void page_pool_ring_unlock(struct page_pool *pool)
-+	__releases(&pool->ring.producer_lock)
-+{
-+	if (in_serving_softirq())
-+		spin_unlock(&pool->ring.producer_lock);
-+	else
-+		spin_unlock_bh(&pool->ring.producer_lock);
-+}
-+
- #endif /* _NET_PAGE_POOL_H */
---- a/net/core/page_pool.c
-+++ b/net/core/page_pool.c
-@@ -11,16 +11,22 @@
- #include <linux/device.h>
- 
- #include <net/page_pool.h>
-+#include <net/xdp.h>
-+
- #include <linux/dma-direction.h>
- #include <linux/dma-mapping.h>
- #include <linux/page-flags.h>
- #include <linux/mm.h> /* for __put_page() */
-+#include <linux/poison.h>
-+#include <linux/ethtool.h>
- 
- #include <trace/events/page_pool.h>
- 
- #define DEFER_TIME (msecs_to_jiffies(1000))
- #define DEFER_WARN_INTERVAL (60 * HZ)
- 
-+#define BIAS_MAX	LONG_MAX
-+
- static int page_pool_init(struct page_pool *pool,
- 			  const struct page_pool_params *params)
- {
-@@ -64,6 +70,10 @@ static int page_pool_init(struct page_po
- 		 */
- 	}
- 
-+	if (PAGE_POOL_DMA_USE_PP_FRAG_COUNT &&
-+	    pool->p.flags & PP_FLAG_PAGE_FRAG)
-+		return -EINVAL;
-+
- 	if (ptr_ring_init(&pool->ring, ring_qsize, GFP_KERNEL) < 0)
- 		return -ENOMEM;
- 
-@@ -180,40 +190,10 @@ static void page_pool_dma_sync_for_devic
- 					 pool->p.dma_dir);
- }
- 
--/* slow path */
--noinline
--static struct page *__page_pool_alloc_pages_slow(struct page_pool *pool,
--						 gfp_t _gfp)
-+static bool page_pool_dma_map(struct page_pool *pool, struct page *page)
- {
--	struct page *page;
--	gfp_t gfp = _gfp;
- 	dma_addr_t dma;
- 
--	/* We could always set __GFP_COMP, and avoid this branch, as
--	 * prep_new_page() can handle order-0 with __GFP_COMP.
--	 */
--	if (pool->p.order)
--		gfp |= __GFP_COMP;
--
--	/* FUTURE development:
--	 *
--	 * Current slow-path essentially falls back to single page
--	 * allocations, which doesn't improve performance.  This code
--	 * need bulk allocation support from the page allocator code.
--	 */
--
--	/* Cache was empty, do real allocation */
--#ifdef CONFIG_NUMA
--	page = alloc_pages_node(pool->p.nid, gfp, pool->p.order);
--#else
--	page = alloc_pages(gfp, pool->p.order);
--#endif
--	if (!page)
--		return NULL;
--
--	if (!(pool->p.flags & PP_FLAG_DMA_MAP))
--		goto skip_dma_map;
--
- 	/* Setup DMA mapping: use 'struct page' area for storing DMA-addr
- 	 * since dma_addr_t can be either 32 or 64 bits and does not always fit
- 	 * into page private data (i.e 32bit cpu with 64bit DMA caps)
-@@ -222,22 +202,53 @@ static struct page *__page_pool_alloc_pa
- 	dma = dma_map_page_attrs(pool->p.dev, page, 0,
- 				 (PAGE_SIZE << pool->p.order),
- 				 pool->p.dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
--	if (dma_mapping_error(pool->p.dev, dma)) {
--		put_page(page);
--		return NULL;
--	}
-+	if (dma_mapping_error(pool->p.dev, dma))
-+		return false;
-+
- 	page_pool_set_dma_addr(page, dma);
- 
- 	if (pool->p.flags & PP_FLAG_DMA_SYNC_DEV)
- 		page_pool_dma_sync_for_device(pool, page, pool->p.max_len);
- 
--skip_dma_map:
-+	return true;
-+}
-+
-+static void page_pool_set_pp_info(struct page_pool *pool,
-+				  struct page *page)
-+{
-+	page->pp = pool;
-+	page->pp_magic |= PP_SIGNATURE;
-+}
-+
-+static void page_pool_clear_pp_info(struct page *page)
-+{
-+	page->pp_magic = 0;
-+	page->pp = NULL;
-+}
-+
-+/* slow path */
-+noinline
-+static struct page *__page_pool_alloc_pages_slow(struct page_pool *pool,
-+						 gfp_t gfp)
-+{
-+	struct page *page;
-+
-+	gfp |= __GFP_COMP;
-+	page = alloc_pages_node(pool->p.nid, gfp, pool->p.order);
-+	if (unlikely(!page))
-+		return NULL;
-+
-+	if ((pool->p.flags & PP_FLAG_DMA_MAP) &&
-+	    unlikely(!page_pool_dma_map(pool, page))) {
-+		put_page(page);
-+		return NULL;
-+	}
-+
-+	page_pool_set_pp_info(pool, page);
-+
- 	/* Track how many pages are held 'in-flight' */
- 	pool->pages_state_hold_cnt++;
--
- 	trace_page_pool_state_hold(pool, page, pool->pages_state_hold_cnt);
--
--	/* When page just alloc'ed is should/must have refcnt 1. */
- 	return page;
- }
- 
-@@ -302,10 +313,12 @@ void page_pool_release_page(struct page_
- 			     DMA_ATTR_SKIP_CPU_SYNC);
- 	page_pool_set_dma_addr(page, 0);
- skip_dma_unmap:
-+	page_pool_clear_pp_info(page);
-+
- 	/* This may be the last page returned, releasing the pool, so
- 	 * it is not safe to reference pool afterwards.
- 	 */
--	count = atomic_inc_return(&pool->pages_state_release_cnt);
-+	count = atomic_inc_return_relaxed(&pool->pages_state_release_cnt);
- 	trace_page_pool_state_release(pool, page, count);
- }
- EXPORT_SYMBOL(page_pool_release_page);
-@@ -331,7 +344,10 @@ static bool page_pool_recycle_in_ring(st
- 	else
- 		ret = ptr_ring_produce_bh(&pool->ring, page);
- 
--	return (ret == 0) ? true : false;
-+	if (!ret)
-+		return true;
-+
-+	return false;
- }
- 
- /* Only allow direct recycling in special circumstances, into the
-@@ -350,46 +366,43 @@ static bool page_pool_recycle_in_cache(s
- 	return true;
- }
- 
--/* page is NOT reusable when:
-- * 1) allocated when system is under some pressure. (page_is_pfmemalloc)
-- */
--static bool pool_page_reusable(struct page_pool *pool, struct page *page)
--{
--	return !page_is_pfmemalloc(page);
--}
--
- /* If the page refcnt == 1, this will try to recycle the page.
-  * if PP_FLAG_DMA_SYNC_DEV is set, we'll try to sync the DMA area for
-  * the configured size min(dma_sync_size, pool->max_len).
-  * If the page refcnt != 1, then the page will be returned to memory
-  * subsystem.
-  */
--void page_pool_put_page(struct page_pool *pool, struct page *page,
--			unsigned int dma_sync_size, bool allow_direct)
--{
-+static __always_inline struct page *
-+__page_pool_put_page(struct page_pool *pool, struct page *page,
-+		     unsigned int dma_sync_size, bool allow_direct)
-+{
-+	/* It is not the last user for the page frag case */
-+	if (pool->p.flags & PP_FLAG_PAGE_FRAG &&
-+	    page_pool_atomic_sub_frag_count_return(page, 1))
-+		return NULL;
-+
- 	/* This allocator is optimized for the XDP mode that uses
- 	 * one-frame-per-page, but have fallbacks that act like the
- 	 * regular page allocator APIs.
- 	 *
- 	 * refcnt == 1 means page_pool owns page, and can recycle it.
-+	 *
-+	 * page is NOT reusable when allocated when system is under
-+	 * some pressure. (page_is_pfmemalloc)
- 	 */
--	if (likely(page_ref_count(page) == 1 &&
--		   pool_page_reusable(pool, page))) {
-+	if (likely(page_ref_count(page) == 1 && !page_is_pfmemalloc(page))) {
- 		/* Read barrier done in page_ref_count / READ_ONCE */
- 
- 		if (pool->p.flags & PP_FLAG_DMA_SYNC_DEV)
- 			page_pool_dma_sync_for_device(pool, page,
- 						      dma_sync_size);
- 
--		if (allow_direct && in_serving_softirq())
--			if (page_pool_recycle_in_cache(page, pool))
--				return;
-+		if (allow_direct && in_serving_softirq() &&
-+		    page_pool_recycle_in_cache(page, pool))
-+			return NULL;
- 
--		if (!page_pool_recycle_in_ring(pool, page)) {
--			/* Cache full, fallback to free pages */
--			page_pool_return_page(pool, page);
--		}
--		return;
-+		/* Page found as candidate for recycling */
-+		return page;
- 	}
- 	/* Fallback/non-XDP mode: API user have elevated refcnt.
- 	 *
-@@ -407,9 +420,98 @@ void page_pool_put_page(struct page_pool
- 	/* Do not replace this with page_pool_return_page() */
- 	page_pool_release_page(pool, page);
- 	put_page(page);
-+
-+	return NULL;
-+}
-+
-+void page_pool_put_page(struct page_pool *pool, struct page *page,
-+			unsigned int dma_sync_size, bool allow_direct)
-+{
-+	page = __page_pool_put_page(pool, page, dma_sync_size, allow_direct);
-+	if (page && !page_pool_recycle_in_ring(pool, page))
-+		/* Cache full, fallback to free pages */
-+		page_pool_return_page(pool, page);
- }
- EXPORT_SYMBOL(page_pool_put_page);
- 
-+static struct page *page_pool_drain_frag(struct page_pool *pool,
-+					 struct page *page)
-+{
-+	long drain_count = BIAS_MAX - pool->frag_users;
-+
-+	/* Some user is still using the page frag */
-+	if (likely(page_pool_atomic_sub_frag_count_return(page,
-+							  drain_count)))
-+		return NULL;
-+
-+	if (page_ref_count(page) == 1 && !page_is_pfmemalloc(page)) {
-+		if (pool->p.flags & PP_FLAG_DMA_SYNC_DEV)
-+			page_pool_dma_sync_for_device(pool, page, -1);
-+
-+		return page;
-+	}
-+
-+	page_pool_return_page(pool, page);
-+	return NULL;
-+}
-+
-+static void page_pool_free_frag(struct page_pool *pool)
-+{
-+	long drain_count = BIAS_MAX - pool->frag_users;
-+	struct page *page = pool->frag_page;
-+
-+	pool->frag_page = NULL;
-+
-+	if (!page ||
-+	    page_pool_atomic_sub_frag_count_return(page, drain_count))
-+		return;
-+
-+	page_pool_return_page(pool, page);
-+}
-+
-+struct page *page_pool_alloc_frag(struct page_pool *pool,
-+				  unsigned int *offset,
-+				  unsigned int size, gfp_t gfp)
-+{
-+	unsigned int max_size = PAGE_SIZE << pool->p.order;
-+	struct page *page = pool->frag_page;
-+
-+	if (WARN_ON(!(pool->p.flags & PP_FLAG_PAGE_FRAG) ||
-+		    size > max_size))
-+		return NULL;
-+
-+	size = ALIGN(size, dma_get_cache_alignment());
-+	*offset = pool->frag_offset;
-+
-+	if (page && *offset + size > max_size) {
-+		page = page_pool_drain_frag(pool, page);
-+		if (page)
-+			goto frag_reset;
-+	}
-+
-+	if (!page) {
-+		page = page_pool_alloc_pages(pool, gfp);
-+		if (unlikely(!page)) {
-+			pool->frag_page = NULL;
-+			return NULL;
-+		}
-+
-+		pool->frag_page = page;
-+
-+frag_reset:
-+		pool->frag_users = 1;
-+		*offset = 0;
-+		pool->frag_offset = size;
-+		page_pool_set_frag_count(page, BIAS_MAX);
-+		return page;
-+	}
-+
-+	pool->frag_users++;
-+	pool->frag_offset = *offset + size;
-+	return page;
-+}
-+EXPORT_SYMBOL(page_pool_alloc_frag);
-+
- static void page_pool_empty_ring(struct page_pool *pool)
- {
- 	struct page *page;
-@@ -515,6 +617,8 @@ void page_pool_destroy(struct page_pool
- 	if (!page_pool_put(pool))
- 		return;
- 
-+	page_pool_free_frag(pool);
-+
- 	if (!page_pool_release(pool))
- 		return;
- 
-@@ -541,3 +645,32 @@ void page_pool_update_nid(struct page_po
- 	}
- }
- EXPORT_SYMBOL(page_pool_update_nid);
-+
-+bool page_pool_return_skb_page(struct page *page)
-+{
-+	struct page_pool *pp;
-+
-+	page = compound_head(page);
-+
-+	/* page->pp_magic is OR'ed with PP_SIGNATURE after the allocation
-+	 * in order to preserve any existing bits, such as bit 0 for the
-+	 * head page of compound page and bit 1 for pfmemalloc page, so
-+	 * mask those bits for freeing side when doing below checking,
-+	 * and page_is_pfmemalloc() is checked in __page_pool_put_page()
-+	 * to avoid recycling the pfmemalloc page.
-+	 */
-+	if (unlikely((page->pp_magic & ~0x3UL) != PP_SIGNATURE))
-+		return false;
-+
-+	pp = page->pp;
-+
-+	/* Driver set this to memory recycling info. Reset it on recycle.
-+	 * This will *not* work for NIC using a split-page memory model.
-+	 * The page will be returned to the pool here regardless of the
-+	 * 'flipped' fragment being in use or not.
-+	 */
-+	page_pool_put_full_page(pp, page, false);
-+
-+	return true;
-+}
-+EXPORT_SYMBOL(page_pool_return_skb_page);
---- a/include/linux/mm_types.h
-+++ b/include/linux/mm_types.h
-@@ -97,10 +97,25 @@ struct page {
- 		};
- 		struct {	/* page_pool used by netstack */
- 			/**
--			 * @dma_addr: might require a 64-bit value on
--			 * 32-bit architectures.
-+			 * @pp_magic: magic value to avoid recycling non
-+			 * page_pool allocated pages.
- 			 */
--			unsigned long dma_addr[2];
-+			unsigned long pp_magic;
-+			struct page_pool *pp;
-+			unsigned long _pp_mapping_pad;
-+			unsigned long dma_addr;
-+			union {
-+				/**
-+				 * dma_addr_upper: might require a 64-bit
-+				 * value on 32-bit architectures.
-+				 */
-+				unsigned long dma_addr_upper;
-+				/**
-+				 * For frag page support, not supported in
-+				 * 32-bit architectures with 64-bit DMA.
-+				 */
-+				atomic_long_t pp_frag_count;
-+			};
- 		};
- 		struct {	/* slab, slob and slub */
- 			union {
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -594,13 +594,22 @@ static void skb_clone_fraglist(struct sk
- 		skb_get(list);
- }
- 
-+static bool skb_pp_recycle(struct sk_buff *skb, void *data)
-+{
-+	if (!IS_ENABLED(CONFIG_PAGE_POOL) || !skb->pp_recycle)
-+		return false;
-+	return page_pool_return_skb_page(virt_to_page(data));
-+}
-+
- static void skb_free_head(struct sk_buff *skb)
- {
- 	unsigned char *head = skb->head;
- 
--	if (skb->head_frag)
-+	if (skb->head_frag) {
-+		if (skb_pp_recycle(skb, head))
-+			return;
- 		skb_free_frag(head);
--	else
-+	} else
- 		kfree(head);
- }
- 
-@@ -612,16 +621,27 @@ static void skb_release_data(struct sk_b
- 	if (skb->cloned &&
- 	    atomic_sub_return(skb->nohdr ? (1 << SKB_DATAREF_SHIFT) + 1 : 1,
- 			      &shinfo->dataref))
--		return;
-+		goto exit;
- 
- 	for (i = 0; i < shinfo->nr_frags; i++)
--		__skb_frag_unref(&shinfo->frags[i]);
-+		__skb_frag_unref(&shinfo->frags[i], skb->pp_recycle);
- 
- 	if (shinfo->frag_list)
- 		kfree_skb_list(shinfo->frag_list);
- 
- 	skb_zcopy_clear(skb, true);
- 	skb_free_head(skb);
-+exit:
-+	/* When we clone an SKB we copy the reycling bit. The pp_recycle
-+	 * bit is only set on the head though, so in order to avoid races
-+	 * while trying to recycle fragments on __skb_frag_unref() we need
-+	 * to make one SKB responsible for triggering the recycle path.
-+	 * So disable the recycling bit if an SKB is cloned and we have
-+	 * additional references to to the fragmented part of the SKB.
-+	 * Eventually the last SKB will have the recycling bit set and it's
-+	 * dataref set to 0, which will trigger the recycling
-+	 */
-+	skb->pp_recycle = 0;
- }
- 
- /*
-@@ -1002,6 +1022,7 @@ static struct sk_buff *__skb_clone(struc
- 	n->nohdr = 0;
- 	n->peeked = 0;
- 	C(pfmemalloc);
-+	C(pp_recycle);
- 	n->destructor = NULL;
- 	C(tail);
- 	C(end);
-@@ -3420,7 +3441,7 @@ int skb_shift(struct sk_buff *tgt, struc
- 		fragto = &skb_shinfo(tgt)->frags[merge];
- 
- 		skb_frag_size_add(fragto, skb_frag_size(fragfrom));
--		__skb_frag_unref(fragfrom);
-+		__skb_frag_unref(fragfrom, skb->pp_recycle);
- 	}
- 
- 	/* Reposition in the original skb */
-@@ -5187,6 +5208,20 @@ bool skb_try_coalesce(struct sk_buff *to
- 	if (skb_cloned(to))
- 		return false;
- 
-+	/* In general, avoid mixing slab allocated and page_pool allocated
-+	 * pages within the same SKB. However when @to is not pp_recycle and
-+	 * @from is cloned, we can transition frag pages from page_pool to
-+	 * reference counted.
-+	 *
-+	 * On the other hand, don't allow coalescing two pp_recycle SKBs if
-+	 * @from is cloned, in case the SKB is using page_pool fragment
-+	 * references (PP_FLAG_PAGE_FRAG). Since we only take full page
-+	 * references for cloned SKBs at the moment that would result in
-+	 * inconsistent reference counts.
-+	 */
-+	if (to->pp_recycle != (from->pp_recycle && !skb_cloned(from)))
-+		return false;
-+
- 	if (len <= skb_tailroom(to)) {
- 		if (len)
- 			BUG_ON(skb_copy_bits(from, 0, skb_put(to, len), len));
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -37,6 +37,7 @@
- #include <linux/in6.h>
- #include <linux/if_packet.h>
- #include <net/flow.h>
-+#include <net/page_pool.h>
- #if IS_ENABLED(CONFIG_NF_CONNTRACK)
- #include <linux/netfilter/nf_conntrack_common.h>
- #endif
-@@ -787,7 +788,8 @@ struct sk_buff {
- 				fclone:2,
- 				peeked:1,
- 				head_frag:1,
--				pfmemalloc:1;
-+				pfmemalloc:1,
-+				pp_recycle:1; /* page_pool recycle indicator */
- #ifdef CONFIG_SKB_EXTENSIONS
- 	__u8			active_extensions;
- #endif
-@@ -3030,9 +3032,15 @@ static inline void skb_frag_ref(struct s
-  *
-  * Releases a reference on the paged fragment @frag.
-  */
--static inline void __skb_frag_unref(skb_frag_t *frag)
-+static inline void __skb_frag_unref(skb_frag_t *frag, bool recycle)
- {
--	put_page(skb_frag_page(frag));
-+	struct page *page = skb_frag_page(frag);
-+
-+#ifdef CONFIG_PAGE_POOL
-+	if (recycle && page_pool_return_skb_page(page))
-+		return;
-+#endif
-+	put_page(page);
- }
- 
- /**
-@@ -3044,7 +3052,7 @@ static inline void __skb_frag_unref(skb_
-  */
- static inline void skb_frag_unref(struct sk_buff *skb, int f)
- {
--	__skb_frag_unref(&skb_shinfo(skb)->frags[f]);
-+	__skb_frag_unref(&skb_shinfo(skb)->frags[f], skb->pp_recycle);
- }
- 
- /**
-@@ -4643,5 +4651,12 @@ static inline u64 skb_get_kcov_handle(st
- #endif
- }
- 
-+#ifdef CONFIG_PAGE_POOL
-+static inline void skb_mark_for_recycle(struct sk_buff *skb)
-+{
-+	skb->pp_recycle = 1;
-+}
-+#endif
-+
- #endif	/* __KERNEL__ */
- #endif	/* _LINUX_SKBUFF_H */
---- a/drivers/net/ethernet/marvell/sky2.c
-+++ b/drivers/net/ethernet/marvell/sky2.c
-@@ -2501,7 +2501,7 @@ static void skb_put_frags(struct sk_buff
- 
- 		if (length == 0) {
- 			/* don't need this page */
--			__skb_frag_unref(frag);
-+			__skb_frag_unref(frag, false);
- 			--skb_shinfo(skb)->nr_frags;
- 		} else {
- 			size = min(length, (unsigned) PAGE_SIZE);
---- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
-+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
-@@ -526,7 +526,7 @@ static int mlx4_en_complete_rx_desc(stru
- fail:
- 	while (nr > 0) {
- 		nr--;
--		__skb_frag_unref(skb_shinfo(skb)->frags + nr);
-+		__skb_frag_unref(skb_shinfo(skb)->frags + nr, false);
- 	}
- 	return 0;
- }
---- a/net/tls/tls_device.c
-+++ b/net/tls/tls_device.c
-@@ -131,7 +131,7 @@ static void destroy_record(struct tls_re
- 	int i;
- 
- 	for (i = 0; i < record->num_frags; i++)
--		__skb_frag_unref(&record->frags[i]);
-+		__skb_frag_unref(&record->frags[i], false);
- 	kfree(record);
- }
- 
---- a/include/linux/poison.h
-+++ b/include/linux/poison.h
-@@ -82,4 +82,7 @@
- /********** security/ **********/
- #define KEY_DESTROY		0xbd
- 
-+/********** net/core/page_pool.c **********/
-+#define PP_SIGNATURE		(0x40 + POISON_POINTER_DELTA)
-+
- #endif
---- a/include/linux/mm.h
-+++ b/include/linux/mm.h
-@@ -1602,7 +1602,7 @@ static inline bool page_is_pfmemalloc(st
- 	 * Page index cannot be this large so this must be
- 	 * a pfmemalloc page.
- 	 */
--	return page->index == -1UL;
-+	return (uintptr_t)page->lru.next & BIT(1);
- }
- 
- /*
-@@ -1611,12 +1611,12 @@ static inline bool page_is_pfmemalloc(st
-  */
- static inline void set_page_pfmemalloc(struct page *page)
- {
--	page->index = -1UL;
-+	page->lru.next = (void *)BIT(1);
- }
- 
- static inline void clear_page_pfmemalloc(struct page *page)
- {
--	page->index = 0;
-+	page->lru.next = NULL;
- }
- 
- /*
diff --git a/target/linux/generic/backport-5.10/631-v6.3-net-page_pool-use-in_softirq-instead.patch b/target/linux/generic/backport-5.10/631-v6.3-net-page_pool-use-in_softirq-instead.patch
deleted file mode 100644
index e0d5b2451b24..000000000000
--- a/target/linux/generic/backport-5.10/631-v6.3-net-page_pool-use-in_softirq-instead.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From: Qingfang DENG <qingfang.deng@siflower.com.cn>
-Date: Fri, 3 Feb 2023 09:16:11 +0800
-Subject: [PATCH] net: page_pool: use in_softirq() instead
-
-We use BH context only for synchronization, so we don't care if it's
-actually serving softirq or not.
-
-As a side node, in case of threaded NAPI, in_serving_softirq() will
-return false because it's in process context with BH off, making
-page_pool_recycle_in_cache() unreachable.
-
-Signed-off-by: Qingfang DENG <qingfang.deng@siflower.com.cn>
----
-
---- a/include/net/page_pool.h
-+++ b/include/net/page_pool.h
-@@ -295,7 +295,7 @@ static inline void page_pool_nid_changed
- static inline void page_pool_ring_lock(struct page_pool *pool)
- 	__acquires(&pool->ring.producer_lock)
- {
--	if (in_serving_softirq())
-+	if (in_softirq())
- 		spin_lock(&pool->ring.producer_lock);
- 	else
- 		spin_lock_bh(&pool->ring.producer_lock);
-@@ -304,7 +304,7 @@ static inline void page_pool_ring_lock(s
- static inline void page_pool_ring_unlock(struct page_pool *pool)
- 	__releases(&pool->ring.producer_lock)
- {
--	if (in_serving_softirq())
-+	if (in_softirq())
- 		spin_unlock(&pool->ring.producer_lock);
- 	else
- 		spin_unlock_bh(&pool->ring.producer_lock);
---- a/net/core/page_pool.c
-+++ b/net/core/page_pool.c
-@@ -338,8 +338,8 @@ static void page_pool_return_page(struct
- static bool page_pool_recycle_in_ring(struct page_pool *pool, struct page *page)
- {
- 	int ret;
--	/* BH protection not needed if current is serving softirq */
--	if (in_serving_softirq())
-+	/* BH protection not needed if current is softirq */
-+	if (in_softirq())
- 		ret = ptr_ring_produce(&pool->ring, page);
- 	else
- 		ret = ptr_ring_produce_bh(&pool->ring, page);
-@@ -397,7 +397,7 @@ __page_pool_put_page(struct page_pool *p
- 			page_pool_dma_sync_for_device(pool, page,
- 						      dma_sync_size);
- 
--		if (allow_direct && in_serving_softirq() &&
-+		if (allow_direct && in_softirq() &&
- 		    page_pool_recycle_in_cache(page, pool))
- 			return NULL;
- 
diff --git a/target/linux/generic/backport-5.10/632-v6.3-net-add-helper-eth_addr_add.patch b/target/linux/generic/backport-5.10/632-v6.3-net-add-helper-eth_addr_add.patch
deleted file mode 100644
index ac556e53af54..000000000000
--- a/target/linux/generic/backport-5.10/632-v6.3-net-add-helper-eth_addr_add.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 7390609b0121a1b982c5ecdfcd72dc328e5784ee Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:42 +0000
-Subject: [PATCH] net: add helper eth_addr_add()
-
-Add a helper to add an offset to a ethernet address. This comes in handy
-if you have a base ethernet address for multiple interfaces.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Acked-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-9-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- include/linux/etherdevice.h | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -466,6 +466,20 @@ static inline void eth_addr_inc(u8 *addr
- }
- 
- /**
-+ * eth_addr_add() - Add (or subtract) an offset to/from the given MAC address.
-+ *
-+ * @offset: Offset to add.
-+ * @addr: Pointer to a six-byte array containing Ethernet address to increment.
-+ */
-+static inline void eth_addr_add(u8 *addr, long offset)
-+{
-+	u64 u = ether_addr_to_u64(addr);
-+
-+	u += offset;
-+	u64_to_ether_addr(u, addr);
-+}
-+
-+/**
-  * is_etherdev_addr - Tell if given Ethernet address belongs to the device.
-  * @dev: Pointer to a device structure
-  * @addr: Pointer to a six-byte array containing the Ethernet address
diff --git a/target/linux/generic/backport-5.10/633-v6.3-skbuff-Fix-a-race-between-coalescing-and-releasing-S.patch b/target/linux/generic/backport-5.10/633-v6.3-skbuff-Fix-a-race-between-coalescing-and-releasing-S.patch
deleted file mode 100644
index 2ad315d7f962..000000000000
--- a/target/linux/generic/backport-5.10/633-v6.3-skbuff-Fix-a-race-between-coalescing-and-releasing-S.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From: Liang Chen <liangchen.linux@gmail.com>
-Date: Thu, 13 Apr 2023 17:03:53 +0800
-Subject: [PATCH] skbuff: Fix a race between coalescing and releasing SKBs
-
-Commit 1effe8ca4e34 ("skbuff: fix coalescing for page_pool fragment
-recycling") allowed coalescing to proceed with non page pool page and page
-pool page when @from is cloned, i.e.
-
-to->pp_recycle    --> false
-from->pp_recycle  --> true
-skb_cloned(from)  --> true
-
-However, it actually requires skb_cloned(@from) to hold true until
-coalescing finishes in this situation. If the other cloned SKB is
-released while the merging is in process, from_shinfo->nr_frags will be
-set to 0 toward the end of the function, causing the increment of frag
-page _refcount to be unexpectedly skipped resulting in inconsistent
-reference counts. Later when SKB(@to) is released, it frees the page
-directly even though the page pool page is still in use, leading to
-use-after-free or double-free errors. So it should be prohibited.
-
-The double-free error message below prompted us to investigate:
-BUG: Bad page state in process swapper/1  pfn:0e0d1
-page:00000000c6548b28 refcount:-1 mapcount:0 mapping:0000000000000000
-index:0x2 pfn:0xe0d1
-flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
-raw: 000fffffc0000000 0000000000000000 ffffffff00000101 0000000000000000
-raw: 0000000000000002 0000000000000000 ffffffffffffffff 0000000000000000
-page dumped because: nonzero _refcount
-
-CPU: 1 PID: 0 Comm: swapper/1 Tainted: G            E      6.2.0+
-Call Trace:
- <IRQ>
-dump_stack_lvl+0x32/0x50
-bad_page+0x69/0xf0
-free_pcp_prepare+0x260/0x2f0
-free_unref_page+0x20/0x1c0
-skb_release_data+0x10b/0x1a0
-napi_consume_skb+0x56/0x150
-net_rx_action+0xf0/0x350
-? __napi_schedule+0x79/0x90
-__do_softirq+0xc8/0x2b1
-__irq_exit_rcu+0xb9/0xf0
-common_interrupt+0x82/0xa0
-</IRQ>
-<TASK>
-asm_common_interrupt+0x22/0x40
-RIP: 0010:default_idle+0xb/0x20
-
-Fixes: 53e0961da1c7 ("page_pool: add frag page recycling support in page pool")
-Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
-Reviewed-by: Eric Dumazet <edumazet@google.com>
-Link: https://lore.kernel.org/r/20230413090353.14448-1-liangchen.linux@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -5208,18 +5208,18 @@ bool skb_try_coalesce(struct sk_buff *to
- 	if (skb_cloned(to))
- 		return false;
- 
--	/* In general, avoid mixing slab allocated and page_pool allocated
--	 * pages within the same SKB. However when @to is not pp_recycle and
--	 * @from is cloned, we can transition frag pages from page_pool to
--	 * reference counted.
--	 *
--	 * On the other hand, don't allow coalescing two pp_recycle SKBs if
--	 * @from is cloned, in case the SKB is using page_pool fragment
-+	/* In general, avoid mixing page_pool and non-page_pool allocated
-+	 * pages within the same SKB. Additionally avoid dealing with clones
-+	 * with page_pool pages, in case the SKB is using page_pool fragment
- 	 * references (PP_FLAG_PAGE_FRAG). Since we only take full page
- 	 * references for cloned SKBs at the moment that would result in
- 	 * inconsistent reference counts.
-+	 * In theory we could take full references if @from is cloned and
-+	 * !@to->pp_recycle but its tricky (due to potential race with
-+	 * the clone disappearing) and rare, so not worth dealing with.
- 	 */
--	if (to->pp_recycle != (from->pp_recycle && !skb_cloned(from)))
-+	if (to->pp_recycle != from->pp_recycle ||
-+	    (from->pp_recycle && skb_cloned(from)))
- 		return false;
- 
- 	if (len <= skb_tailroom(to)) {
diff --git a/target/linux/generic/backport-5.10/705-net-phy-at803x-select-correct-page-on-config-init.patch b/target/linux/generic/backport-5.10/705-net-phy-at803x-select-correct-page-on-config-init.patch
deleted file mode 100644
index 00be403299a9..000000000000
--- a/target/linux/generic/backport-5.10/705-net-phy-at803x-select-correct-page-on-config-init.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From c329e5afb42ff0a88285eb4d8a391a18793e4777 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Thu, 15 Apr 2021 03:26:50 +0200
-Subject: [PATCH] net: phy: at803x: select correct page on config init
-
-The Atheros AR8031 and AR8033 expose different registers for SGMII/Fiber
-as well as the copper side of the PHY depending on the BT_BX_REG_SEL bit
-in the chip configure register.
-
-The driver assumes the copper side is selected on probe, but this might
-not be the case depending which page was last selected by the
-bootloader. Notably, Ubiquiti UniFi bootloaders show this behavior.
-
-Select the copper page when probing to circumvent this.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 50 +++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 49 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -139,6 +139,9 @@
- #define ATH8035_PHY_ID 0x004dd072
- #define AT8030_PHY_ID_MASK			0xffffffef
- 
-+#define AT803X_PAGE_FIBER		0
-+#define AT803X_PAGE_COPPER		1
-+
- MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
- MODULE_LICENSE("GPL");
-@@ -190,6 +193,35 @@ static int at803x_debug_reg_mask(struct
- 	return phy_write(phydev, AT803X_DEBUG_DATA, val);
- }
- 
-+static int at803x_write_page(struct phy_device *phydev, int page)
-+{
-+	int mask;
-+	int set;
-+
-+	if (page == AT803X_PAGE_COPPER) {
-+		set = AT803X_BT_BX_REG_SEL;
-+		mask = 0;
-+	} else {
-+		set = 0;
-+		mask = AT803X_BT_BX_REG_SEL;
-+	}
-+
-+	return __phy_modify(phydev, AT803X_REG_CHIP_CONFIG, mask, set);
-+}
-+
-+static int at803x_read_page(struct phy_device *phydev)
-+{
-+	int ccr = __phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-+
-+	if (ccr < 0)
-+		return ccr;
-+
-+	if (ccr & AT803X_BT_BX_REG_SEL)
-+		return AT803X_PAGE_COPPER;
-+
-+	return AT803X_PAGE_FIBER;
-+}
-+
- static int at803x_enable_rx_delay(struct phy_device *phydev)
- {
- 	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
-@@ -508,6 +540,7 @@ static int at803x_probe(struct phy_devic
- {
- 	struct device *dev = &phydev->mdio.dev;
- 	struct at803x_priv *priv;
-+	int ret;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
-@@ -515,7 +548,20 @@ static int at803x_probe(struct phy_devic
- 
- 	phydev->priv = priv;
- 
--	return at803x_parse_dt(phydev);
-+	ret = at803x_parse_dt(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* Some bootloaders leave the fiber page selected.
-+	 * Switch to the copper page, as otherwise we read
-+	 * the PHY capabilities from the fiber side.
-+	 */
-+	if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
-+		ret = phy_select_page(phydev, AT803X_PAGE_COPPER);
-+		ret = phy_restore_page(phydev, AT803X_PAGE_COPPER, ret);
-+	}
-+
-+	return ret;
- }
- 
- static void at803x_remove(struct phy_device *phydev)
-@@ -1097,6 +1143,8 @@ static struct phy_driver at803x_driver[]
- 	.get_wol		= at803x_get_wol,
- 	.suspend		= at803x_suspend,
- 	.resume			= at803x_resume,
-+	.read_page		= at803x_read_page,
-+	.write_page		= at803x_write_page,
- 	/* PHY_GBIT_FEATURES */
- 	.read_status		= at803x_read_status,
- 	.aneg_done		= at803x_aneg_done,
diff --git a/target/linux/generic/backport-5.10/706-net-phy-at803x-fix-probe-error-if-copper-page-is-sel.patch b/target/linux/generic/backport-5.10/706-net-phy-at803x-fix-probe-error-if-copper-page-is-sel.patch
deleted file mode 100644
index d6ec7450e82b..000000000000
--- a/target/linux/generic/backport-5.10/706-net-phy-at803x-fix-probe-error-if-copper-page-is-sel.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 8f7e876273e294b732b42af2e5e6bba91d798954 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 20 Apr 2021 12:29:29 +0200
-Subject: [PATCH] net: phy: at803x: fix probe error if copper page is selected
-
-The commit c329e5afb42f ("net: phy: at803x: select correct page on
-config init") selects the copper page during probe. This fails if the
-copper page was already selected. In this case, the value of the copper
-page (which is 1) is propagated through phy_restore_page() and is
-finally returned for at803x_probe(). Fix it, by just using the
-at803x_page_write() directly.
-
-Also in case of an error, the regulator is not disabled and leads to a
-WARN_ON() when the probe fails. This couldn't happen before, because
-at803x_parse_dt() was the last call in at803x_probe(). It is hard to
-see, that the parse_dt() actually enables the regulator. Thus move the
-regulator_enable() to the probe function and undo it in case of an
-error.
-
-Fixes: c329e5afb42f ("net: phy: at803x: select correct page on config init")
-Signed-off-by: Michael Walle <michael@walle.cc>
-Reviewed-by: David Bauer <mail@david-bauer.net>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 23 +++++++++++++++++------
- 1 file changed, 17 insertions(+), 6 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -527,10 +527,6 @@ static int at803x_parse_dt(struct phy_de
- 			phydev_err(phydev, "failed to get VDDIO regulator\n");
- 			return PTR_ERR(priv->vddio);
- 		}
--
--		ret = regulator_enable(priv->vddio);
--		if (ret < 0)
--			return ret;
- 	}
- 
- 	return 0;
-@@ -552,15 +548,30 @@ static int at803x_probe(struct phy_devic
- 	if (ret)
- 		return ret;
- 
-+	if (priv->vddio) {
-+		ret = regulator_enable(priv->vddio);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
- 	/* Some bootloaders leave the fiber page selected.
- 	 * Switch to the copper page, as otherwise we read
- 	 * the PHY capabilities from the fiber side.
- 	 */
- 	if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
--		ret = phy_select_page(phydev, AT803X_PAGE_COPPER);
--		ret = phy_restore_page(phydev, AT803X_PAGE_COPPER, ret);
-+		phy_lock_mdio_bus(phydev);
-+		ret = at803x_write_page(phydev, AT803X_PAGE_COPPER);
-+		phy_unlock_mdio_bus(phydev);
-+		if (ret)
-+			goto err;
- 	}
- 
-+	return 0;
-+
-+err:
-+	if (priv->vddio)
-+		regulator_disable(priv->vddio);
-+
- 	return ret;
- }
- 
diff --git a/target/linux/generic/backport-5.10/710-v5.12-net-phy-Add-100-base-x-mode.patch b/target/linux/generic/backport-5.10/710-v5.12-net-phy-Add-100-base-x-mode.patch
deleted file mode 100644
index 5c7f97ea90d2..000000000000
--- a/target/linux/generic/backport-5.10/710-v5.12-net-phy-Add-100-base-x-mode.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From b1ae3587d16a8c8fc9453e147c8708d6f006ffbb Mon Sep 17 00:00:00 2001
-From: Bjarni Jonasson <bjarni.jonasson@microchip.com>
-Date: Wed, 13 Jan 2021 12:56:25 +0100
-Subject: [PATCH] net: phy: Add 100 base-x mode
-
-Sparx-5 supports this mode and it is missing in the PHY core.
-
-Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
-Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- Documentation/networking/phy.rst | 5 +++++
- include/linux/phy.h              | 4 ++++
- 2 files changed, 9 insertions(+)
-
---- a/Documentation/networking/phy.rst
-+++ b/Documentation/networking/phy.rst
-@@ -286,6 +286,11 @@ Some of the interface modes are describe
-     Note: due to legacy usage, some 10GBASE-R usage incorrectly makes
-     use of this definition.
- 
-+``PHY_INTERFACE_MODE_100BASEX``
-+    This defines IEEE 802.3 Clause 24.  The link operates at a fixed data
-+    rate of 125Mpbs using a 4B/5B encoding scheme, resulting in an underlying
-+    data rate of 100Mpbs.
-+
- Pause frames / flow control
- ===========================
- 
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -104,6 +104,7 @@ extern const int phy_10gbit_features_arr
-  * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax
-  * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII
-  * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII
-+ * @PHY_INTERFACE_MODE_100BASEX: 100 BaseX
-  * @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX
-  * @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX
-  * @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI
-@@ -135,6 +136,7 @@ typedef enum {
- 	PHY_INTERFACE_MODE_MOCA,
- 	PHY_INTERFACE_MODE_QSGMII,
- 	PHY_INTERFACE_MODE_TRGMII,
-+	PHY_INTERFACE_MODE_100BASEX,
- 	PHY_INTERFACE_MODE_1000BASEX,
- 	PHY_INTERFACE_MODE_2500BASEX,
- 	PHY_INTERFACE_MODE_RXAUI,
-@@ -217,6 +219,8 @@ static inline const char *phy_modes(phy_
- 		return "usxgmii";
- 	case PHY_INTERFACE_MODE_10GKR:
- 		return "10gbase-kr";
-+	case PHY_INTERFACE_MODE_100BASEX:
-+		return "100base-x";
- 	default:
- 		return "unknown";
- 	}
diff --git a/target/linux/generic/backport-5.10/711-v5.12-sfp-add-support-for-100-base-x-SFPs.patch b/target/linux/generic/backport-5.10/711-v5.12-sfp-add-support-for-100-base-x-SFPs.patch
deleted file mode 100644
index 0c87532e1325..000000000000
--- a/target/linux/generic/backport-5.10/711-v5.12-sfp-add-support-for-100-base-x-SFPs.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 6e12f35cef6b8a458d7ecf507ae330e0bffaad8c Mon Sep 17 00:00:00 2001
-From: Bjarni Jonasson <bjarni.jonasson@microchip.com>
-Date: Wed, 13 Jan 2021 12:56:26 +0100
-Subject: [PATCH] sfp: add support for 100 base-x SFPs
-
-Add support for 100Base-FX, 100Base-LX, 100Base-PX and 100Base-BX10 modules
-This is needed for Sparx-5 switch.
-
-Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
-Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/sfp-bus.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -286,6 +286,12 @@ void sfp_parse_support(struct sfp_bus *b
- 	    br_min <= 1300 && br_max >= 1200)
- 		phylink_set(modes, 1000baseX_Full);
- 
-+	/* 100Base-FX, 100Base-LX, 100Base-PX, 100Base-BX10 */
-+	if (id->base.e100_base_fx || id->base.e100_base_lx)
-+		phylink_set(modes, 100baseFX_Full);
-+	if ((id->base.e_base_px || id->base.e_base_bx10) && br_nom == 100)
-+		phylink_set(modes, 100baseFX_Full);
-+
- 	/* For active or passive cables, select the link modes
- 	 * based on the bit rates and the cable compliance bytes.
- 	 */
-@@ -405,6 +411,9 @@ phy_interface_t sfp_select_interface(str
- 	if (phylink_test(link_modes, 1000baseX_Full))
- 		return PHY_INTERFACE_MODE_1000BASEX;
- 
-+	if (phylink_test(link_modes, 100baseFX_Full))
-+		return PHY_INTERFACE_MODE_100BASEX;
-+
- 	dev_warn(bus->sfp_dev, "Unable to ascertain link mode\n");
- 
- 	return PHY_INTERFACE_MODE_NA;
diff --git a/target/linux/generic/backport-5.10/712-v5.13-net-phy-marvell-refactor-HWMON-OOP-style.patch b/target/linux/generic/backport-5.10/712-v5.13-net-phy-marvell-refactor-HWMON-OOP-style.patch
deleted file mode 100644
index 278df4631337..000000000000
--- a/target/linux/generic/backport-5.10/712-v5.13-net-phy-marvell-refactor-HWMON-OOP-style.patch
+++ /dev/null
@@ -1,549 +0,0 @@
-From 41d26bf4aba070dfd2ab48866cc27a48ee6228c7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Tue, 20 Apr 2021 09:53:59 +0200
-Subject: [PATCH] net: phy: marvell: refactor HWMON OOP style
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use a structure of Marvell PHY specific HWMON methods to reduce code
-duplication. Store a pointer to this structure into the PHY driver's
-driver_data member.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/marvell.c | 369 +++++++++++++-------------------------
- 1 file changed, 125 insertions(+), 244 deletions(-)
-
---- a/drivers/net/phy/marvell.c
-+++ b/drivers/net/phy/marvell.c
-@@ -2141,6 +2141,19 @@ static int marvell_vct7_cable_test_get_s
- }
- 
- #ifdef CONFIG_HWMON
-+struct marvell_hwmon_ops {
-+	int (*get_temp)(struct phy_device *phydev, long *temp);
-+	int (*get_temp_critical)(struct phy_device *phydev, long *temp);
-+	int (*set_temp_critical)(struct phy_device *phydev, long temp);
-+	int (*get_temp_alarm)(struct phy_device *phydev, long *alarm);
-+};
-+
-+static const struct marvell_hwmon_ops *
-+to_marvell_hwmon_ops(const struct phy_device *phydev)
-+{
-+	return phydev->drv->driver_data;
-+}
-+
- static int m88e1121_get_temp(struct phy_device *phydev, long *temp)
- {
- 	int oldpage;
-@@ -2184,75 +2197,6 @@ error:
- 	return phy_restore_page(phydev, oldpage, ret);
- }
- 
--static int m88e1121_hwmon_read(struct device *dev,
--			       enum hwmon_sensor_types type,
--			       u32 attr, int channel, long *temp)
--{
--	struct phy_device *phydev = dev_get_drvdata(dev);
--	int err;
--
--	switch (attr) {
--	case hwmon_temp_input:
--		err = m88e1121_get_temp(phydev, temp);
--		break;
--	default:
--		return -EOPNOTSUPP;
--	}
--
--	return err;
--}
--
--static umode_t m88e1121_hwmon_is_visible(const void *data,
--					 enum hwmon_sensor_types type,
--					 u32 attr, int channel)
--{
--	if (type != hwmon_temp)
--		return 0;
--
--	switch (attr) {
--	case hwmon_temp_input:
--		return 0444;
--	default:
--		return 0;
--	}
--}
--
--static u32 m88e1121_hwmon_chip_config[] = {
--	HWMON_C_REGISTER_TZ,
--	0
--};
--
--static const struct hwmon_channel_info m88e1121_hwmon_chip = {
--	.type = hwmon_chip,
--	.config = m88e1121_hwmon_chip_config,
--};
--
--static u32 m88e1121_hwmon_temp_config[] = {
--	HWMON_T_INPUT,
--	0
--};
--
--static const struct hwmon_channel_info m88e1121_hwmon_temp = {
--	.type = hwmon_temp,
--	.config = m88e1121_hwmon_temp_config,
--};
--
--static const struct hwmon_channel_info *m88e1121_hwmon_info[] = {
--	&m88e1121_hwmon_chip,
--	&m88e1121_hwmon_temp,
--	NULL
--};
--
--static const struct hwmon_ops m88e1121_hwmon_hwmon_ops = {
--	.is_visible = m88e1121_hwmon_is_visible,
--	.read = m88e1121_hwmon_read,
--};
--
--static const struct hwmon_chip_info m88e1121_hwmon_chip_info = {
--	.ops = &m88e1121_hwmon_hwmon_ops,
--	.info = m88e1121_hwmon_info,
--};
--
- static int m88e1510_get_temp(struct phy_device *phydev, long *temp)
- {
- 	int ret;
-@@ -2315,92 +2259,6 @@ static int m88e1510_get_temp_alarm(struc
- 	return 0;
- }
- 
--static int m88e1510_hwmon_read(struct device *dev,
--			       enum hwmon_sensor_types type,
--			       u32 attr, int channel, long *temp)
--{
--	struct phy_device *phydev = dev_get_drvdata(dev);
--	int err;
--
--	switch (attr) {
--	case hwmon_temp_input:
--		err = m88e1510_get_temp(phydev, temp);
--		break;
--	case hwmon_temp_crit:
--		err = m88e1510_get_temp_critical(phydev, temp);
--		break;
--	case hwmon_temp_max_alarm:
--		err = m88e1510_get_temp_alarm(phydev, temp);
--		break;
--	default:
--		return -EOPNOTSUPP;
--	}
--
--	return err;
--}
--
--static int m88e1510_hwmon_write(struct device *dev,
--				enum hwmon_sensor_types type,
--				u32 attr, int channel, long temp)
--{
--	struct phy_device *phydev = dev_get_drvdata(dev);
--	int err;
--
--	switch (attr) {
--	case hwmon_temp_crit:
--		err = m88e1510_set_temp_critical(phydev, temp);
--		break;
--	default:
--		return -EOPNOTSUPP;
--	}
--	return err;
--}
--
--static umode_t m88e1510_hwmon_is_visible(const void *data,
--					 enum hwmon_sensor_types type,
--					 u32 attr, int channel)
--{
--	if (type != hwmon_temp)
--		return 0;
--
--	switch (attr) {
--	case hwmon_temp_input:
--	case hwmon_temp_max_alarm:
--		return 0444;
--	case hwmon_temp_crit:
--		return 0644;
--	default:
--		return 0;
--	}
--}
--
--static u32 m88e1510_hwmon_temp_config[] = {
--	HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_MAX_ALARM,
--	0
--};
--
--static const struct hwmon_channel_info m88e1510_hwmon_temp = {
--	.type = hwmon_temp,
--	.config = m88e1510_hwmon_temp_config,
--};
--
--static const struct hwmon_channel_info *m88e1510_hwmon_info[] = {
--	&m88e1121_hwmon_chip,
--	&m88e1510_hwmon_temp,
--	NULL
--};
--
--static const struct hwmon_ops m88e1510_hwmon_hwmon_ops = {
--	.is_visible = m88e1510_hwmon_is_visible,
--	.read = m88e1510_hwmon_read,
--	.write = m88e1510_hwmon_write,
--};
--
--static const struct hwmon_chip_info m88e1510_hwmon_chip_info = {
--	.ops = &m88e1510_hwmon_hwmon_ops,
--	.info = m88e1510_hwmon_info,
--};
--
- static int m88e6390_get_temp(struct phy_device *phydev, long *temp)
- {
- 	int sum = 0;
-@@ -2459,63 +2317,112 @@ error:
- 	return ret;
- }
- 
--static int m88e6390_hwmon_read(struct device *dev,
--			       enum hwmon_sensor_types type,
--			       u32 attr, int channel, long *temp)
-+static int marvell_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
-+			      u32 attr, int channel, long *temp)
- {
- 	struct phy_device *phydev = dev_get_drvdata(dev);
--	int err;
-+	const struct marvell_hwmon_ops *ops = to_marvell_hwmon_ops(phydev);
-+	int err = -EOPNOTSUPP;
- 
- 	switch (attr) {
- 	case hwmon_temp_input:
--		err = m88e6390_get_temp(phydev, temp);
-+		if (ops->get_temp)
-+			err = ops->get_temp(phydev, temp);
-+		break;
-+	case hwmon_temp_crit:
-+		if (ops->get_temp_critical)
-+			err = ops->get_temp_critical(phydev, temp);
-+		break;
-+	case hwmon_temp_max_alarm:
-+		if (ops->get_temp_alarm)
-+			err = ops->get_temp_alarm(phydev, temp);
-+		break;
-+	}
-+
-+	return err;
-+}
-+
-+static int marvell_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
-+			       u32 attr, int channel, long temp)
-+{
-+	struct phy_device *phydev = dev_get_drvdata(dev);
-+	const struct marvell_hwmon_ops *ops = to_marvell_hwmon_ops(phydev);
-+	int err = -EOPNOTSUPP;
-+
-+	switch (attr) {
-+	case hwmon_temp_crit:
-+		if (ops->set_temp_critical)
-+			err = ops->set_temp_critical(phydev, temp);
- 		break;
- 	default:
--		return -EOPNOTSUPP;
-+		fallthrough;
- 	}
- 
- 	return err;
- }
- 
--static umode_t m88e6390_hwmon_is_visible(const void *data,
--					 enum hwmon_sensor_types type,
--					 u32 attr, int channel)
-+static umode_t marvell_hwmon_is_visible(const void *data,
-+					enum hwmon_sensor_types type,
-+					u32 attr, int channel)
- {
-+	const struct phy_device *phydev = data;
-+	const struct marvell_hwmon_ops *ops = to_marvell_hwmon_ops(phydev);
-+
- 	if (type != hwmon_temp)
- 		return 0;
- 
- 	switch (attr) {
- 	case hwmon_temp_input:
--		return 0444;
-+		return ops->get_temp ? 0444 : 0;
-+	case hwmon_temp_max_alarm:
-+		return ops->get_temp_alarm ? 0444 : 0;
-+	case hwmon_temp_crit:
-+		return (ops->get_temp_critical ? 0444 : 0) |
-+		       (ops->set_temp_critical ? 0200 : 0);
- 	default:
- 		return 0;
- 	}
- }
- 
--static u32 m88e6390_hwmon_temp_config[] = {
--	HWMON_T_INPUT,
-+static u32 marvell_hwmon_chip_config[] = {
-+	HWMON_C_REGISTER_TZ,
- 	0
- };
- 
--static const struct hwmon_channel_info m88e6390_hwmon_temp = {
-+static const struct hwmon_channel_info marvell_hwmon_chip = {
-+	.type = hwmon_chip,
-+	.config = marvell_hwmon_chip_config,
-+};
-+
-+/* we can define HWMON_T_CRIT and HWMON_T_MAX_ALARM even though these are not
-+ * defined for all PHYs, because the hwmon code checks whether the attributes
-+ * exists via the .is_visible method
-+ */
-+static u32 marvell_hwmon_temp_config[] = {
-+	HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_MAX_ALARM,
-+	0
-+};
-+
-+static const struct hwmon_channel_info marvell_hwmon_temp = {
- 	.type = hwmon_temp,
--	.config = m88e6390_hwmon_temp_config,
-+	.config = marvell_hwmon_temp_config,
- };
- 
--static const struct hwmon_channel_info *m88e6390_hwmon_info[] = {
--	&m88e1121_hwmon_chip,
--	&m88e6390_hwmon_temp,
-+static const struct hwmon_channel_info *marvell_hwmon_info[] = {
-+	&marvell_hwmon_chip,
-+	&marvell_hwmon_temp,
- 	NULL
- };
- 
--static const struct hwmon_ops m88e6390_hwmon_hwmon_ops = {
--	.is_visible = m88e6390_hwmon_is_visible,
--	.read = m88e6390_hwmon_read,
-+static const struct hwmon_ops marvell_hwmon_hwmon_ops = {
-+	.is_visible = marvell_hwmon_is_visible,
-+	.read = marvell_hwmon_read,
-+	.write = marvell_hwmon_write,
- };
- 
--static const struct hwmon_chip_info m88e6390_hwmon_chip_info = {
--	.ops = &m88e6390_hwmon_hwmon_ops,
--	.info = m88e6390_hwmon_info,
-+static const struct hwmon_chip_info marvell_hwmon_chip_info = {
-+	.ops = &marvell_hwmon_hwmon_ops,
-+	.info = marvell_hwmon_info,
- };
- 
- static int marvell_hwmon_name(struct phy_device *phydev)
-@@ -2538,49 +2445,48 @@ static int marvell_hwmon_name(struct phy
- 	return 0;
- }
- 
--static int marvell_hwmon_probe(struct phy_device *phydev,
--			       const struct hwmon_chip_info *chip)
-+static int marvell_hwmon_probe(struct phy_device *phydev)
- {
-+	const struct marvell_hwmon_ops *ops = to_marvell_hwmon_ops(phydev);
- 	struct marvell_priv *priv = phydev->priv;
- 	struct device *dev = &phydev->mdio.dev;
- 	int err;
- 
-+	if (!ops)
-+		return 0;
-+
- 	err = marvell_hwmon_name(phydev);
- 	if (err)
- 		return err;
- 
- 	priv->hwmon_dev = devm_hwmon_device_register_with_info(
--		dev, priv->hwmon_name, phydev, chip, NULL);
-+		dev, priv->hwmon_name, phydev, &marvell_hwmon_chip_info, NULL);
- 
- 	return PTR_ERR_OR_ZERO(priv->hwmon_dev);
- }
- 
--static int m88e1121_hwmon_probe(struct phy_device *phydev)
--{
--	return marvell_hwmon_probe(phydev, &m88e1121_hwmon_chip_info);
--}
-+static const struct marvell_hwmon_ops m88e1121_hwmon_ops = {
-+	.get_temp = m88e1121_get_temp,
-+};
- 
--static int m88e1510_hwmon_probe(struct phy_device *phydev)
--{
--	return marvell_hwmon_probe(phydev, &m88e1510_hwmon_chip_info);
--}
-+static const struct marvell_hwmon_ops m88e1510_hwmon_ops = {
-+	.get_temp = m88e1510_get_temp,
-+	.get_temp_critical = m88e1510_get_temp_critical,
-+	.set_temp_critical = m88e1510_set_temp_critical,
-+	.get_temp_alarm = m88e1510_get_temp_alarm,
-+};
-+
-+static const struct marvell_hwmon_ops m88e6390_hwmon_ops = {
-+	.get_temp = m88e6390_get_temp,
-+};
-+
-+#define DEF_MARVELL_HWMON_OPS(s) (&(s))
- 
--static int m88e6390_hwmon_probe(struct phy_device *phydev)
--{
--	return marvell_hwmon_probe(phydev, &m88e6390_hwmon_chip_info);
--}
- #else
--static int m88e1121_hwmon_probe(struct phy_device *phydev)
--{
--	return 0;
--}
- 
--static int m88e1510_hwmon_probe(struct phy_device *phydev)
--{
--	return 0;
--}
-+#define DEF_MARVELL_HWMON_OPS(s) NULL
- 
--static int m88e6390_hwmon_probe(struct phy_device *phydev)
-+static int marvell_hwmon_probe(struct phy_device *phydev)
- {
- 	return 0;
- }
-@@ -2596,40 +2502,7 @@ static int marvell_probe(struct phy_devi
- 
- 	phydev->priv = priv;
- 
--	return 0;
--}
--
--static int m88e1121_probe(struct phy_device *phydev)
--{
--	int err;
--
--	err = marvell_probe(phydev);
--	if (err)
--		return err;
--
--	return m88e1121_hwmon_probe(phydev);
--}
--
--static int m88e1510_probe(struct phy_device *phydev)
--{
--	int err;
--
--	err = marvell_probe(phydev);
--	if (err)
--		return err;
--
--	return m88e1510_hwmon_probe(phydev);
--}
--
--static int m88e6390_probe(struct phy_device *phydev)
--{
--	int err;
--
--	err = marvell_probe(phydev);
--	if (err)
--		return err;
--
--	return m88e6390_hwmon_probe(phydev);
-+	return marvell_hwmon_probe(phydev);
- }
- 
- static struct phy_driver marvell_drivers[] = {
-@@ -2714,8 +2587,9 @@ static struct phy_driver marvell_drivers
- 		.phy_id = MARVELL_PHY_ID_88E1121R,
- 		.phy_id_mask = MARVELL_PHY_ID_MASK,
- 		.name = "Marvell 88E1121R",
-+		.driver_data = DEF_MARVELL_HWMON_OPS(m88e1121_hwmon_ops),
- 		/* PHY_GBIT_FEATURES */
--		.probe = m88e1121_probe,
-+		.probe = marvell_probe,
- 		.config_init = marvell_config_init,
- 		.config_aneg = m88e1121_config_aneg,
- 		.read_status = marvell_read_status,
-@@ -2834,9 +2708,10 @@ static struct phy_driver marvell_drivers
- 		.phy_id = MARVELL_PHY_ID_88E1510,
- 		.phy_id_mask = MARVELL_PHY_ID_MASK,
- 		.name = "Marvell 88E1510",
-+		.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
- 		.features = PHY_GBIT_FIBRE_FEATURES,
- 		.flags = PHY_POLL_CABLE_TEST,
--		.probe = m88e1510_probe,
-+		.probe = marvell_probe,
- 		.config_init = m88e1510_config_init,
- 		.config_aneg = m88e1510_config_aneg,
- 		.read_status = marvell_read_status,
-@@ -2863,9 +2738,10 @@ static struct phy_driver marvell_drivers
- 		.phy_id = MARVELL_PHY_ID_88E1540,
- 		.phy_id_mask = MARVELL_PHY_ID_MASK,
- 		.name = "Marvell 88E1540",
-+		.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
- 		/* PHY_GBIT_FEATURES */
- 		.flags = PHY_POLL_CABLE_TEST,
--		.probe = m88e1510_probe,
-+		.probe = marvell_probe,
- 		.config_init = marvell_config_init,
- 		.config_aneg = m88e1510_config_aneg,
- 		.read_status = marvell_read_status,
-@@ -2889,7 +2765,8 @@ static struct phy_driver marvell_drivers
- 		.phy_id = MARVELL_PHY_ID_88E1545,
- 		.phy_id_mask = MARVELL_PHY_ID_MASK,
- 		.name = "Marvell 88E1545",
--		.probe = m88e1510_probe,
-+		.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
-+		.probe = marvell_probe,
- 		/* PHY_GBIT_FEATURES */
- 		.flags = PHY_POLL_CABLE_TEST,
- 		.config_init = marvell_config_init,
-@@ -2935,9 +2812,10 @@ static struct phy_driver marvell_drivers
- 		.phy_id = MARVELL_PHY_ID_88E6341_FAMILY,
- 		.phy_id_mask = MARVELL_PHY_ID_MASK,
- 		.name = "Marvell 88E6341 Family",
-+		.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
- 		/* PHY_GBIT_FEATURES */
- 		.flags = PHY_POLL_CABLE_TEST,
--		.probe = m88e1510_probe,
-+		.probe = marvell_probe,
- 		.config_init = marvell_config_init,
- 		.config_aneg = m88e6390_config_aneg,
- 		.read_status = marvell_read_status,
-@@ -2961,9 +2839,10 @@ static struct phy_driver marvell_drivers
- 		.phy_id = MARVELL_PHY_ID_88E6390_FAMILY,
- 		.phy_id_mask = MARVELL_PHY_ID_MASK,
- 		.name = "Marvell 88E6390 Family",
-+		.driver_data = DEF_MARVELL_HWMON_OPS(m88e6390_hwmon_ops),
- 		/* PHY_GBIT_FEATURES */
- 		.flags = PHY_POLL_CABLE_TEST,
--		.probe = m88e6390_probe,
-+		.probe = marvell_probe,
- 		.config_init = marvell_config_init,
- 		.config_aneg = m88e6390_config_aneg,
- 		.read_status = marvell_read_status,
-@@ -2987,7 +2866,8 @@ static struct phy_driver marvell_drivers
- 		.phy_id = MARVELL_PHY_ID_88E1340S,
- 		.phy_id_mask = MARVELL_PHY_ID_MASK,
- 		.name = "Marvell 88E1340S",
--		.probe = m88e1510_probe,
-+		.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
-+		.probe = marvell_probe,
- 		/* PHY_GBIT_FEATURES */
- 		.config_init = marvell_config_init,
- 		.config_aneg = m88e1510_config_aneg,
-@@ -3009,7 +2889,8 @@ static struct phy_driver marvell_drivers
- 		.phy_id = MARVELL_PHY_ID_88E1548P,
- 		.phy_id_mask = MARVELL_PHY_ID_MASK,
- 		.name = "Marvell 88E1548P",
--		.probe = m88e1510_probe,
-+		.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
-+		.probe = marvell_probe,
- 		.features = PHY_GBIT_FIBRE_FEATURES,
- 		.config_init = marvell_config_init,
- 		.config_aneg = m88e1510_config_aneg,
diff --git a/target/linux/generic/backport-5.10/713-v5.15-net-phy-marvell-add-SFP-support-for-88E1510.patch b/target/linux/generic/backport-5.10/713-v5.15-net-phy-marvell-add-SFP-support-for-88E1510.patch
deleted file mode 100644
index b86e9bf64099..000000000000
--- a/target/linux/generic/backport-5.10/713-v5.15-net-phy-marvell-add-SFP-support-for-88E1510.patch
+++ /dev/null
@@ -1,161 +0,0 @@
-From b697d9d38a5a5ab405d7cc4743d39fe2c5d7517c Mon Sep 17 00:00:00 2001
-From: Ivan Bornyakov <i.bornyakov@metrotek.ru>
-Date: Thu, 12 Aug 2021 16:42:56 +0300
-Subject: [PATCH] net: phy: marvell: add SFP support for 88E1510
-
-Add support for SFP cages connected to the Marvell 88E1512 transceiver.
-88E1512 supports for SGMII/1000Base-X/100Base-FX media type with RGMII
-on system interface. Configure PHY to appropriate mode depending on the
-type of SFP inserted. On SFP removal configure PHY to the RGMII-copper
-mode so RJ-45 port can still work.
-
-Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
-Link: https://lore.kernel.org/r/20210812134256.2436-1-i.bornyakov@metrotek.ru
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/marvell.c | 105 +++++++++++++++++++++++++++++++++++++-
- 1 file changed, 104 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/marvell.c
-+++ b/drivers/net/phy/marvell.c
-@@ -32,6 +32,7 @@
- #include <linux/marvell_phy.h>
- #include <linux/bitfield.h>
- #include <linux/of.h>
-+#include <linux/sfp.h>
- 
- #include <linux/io.h>
- #include <asm/irq.h>
-@@ -46,6 +47,7 @@
- #define MII_MARVELL_MISC_TEST_PAGE	0x06
- #define MII_MARVELL_VCT7_PAGE		0x07
- #define MII_MARVELL_WOL_PAGE		0x11
-+#define MII_MARVELL_MODE_PAGE		0x12
- 
- #define MII_M1011_IEVENT		0x13
- #define MII_M1011_IEVENT_CLEAR		0x0000
-@@ -162,7 +164,14 @@
- 
- #define MII_88E1510_GEN_CTRL_REG_1		0x14
- #define MII_88E1510_GEN_CTRL_REG_1_MODE_MASK	0x7
-+#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII	0x0	/* RGMII to copper */
- #define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII	0x1	/* SGMII to copper */
-+/* RGMII to 1000BASE-X */
-+#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_1000X	0x2
-+/* RGMII to 100BASE-FX */
-+#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_100FX	0x3
-+/* RGMII to SGMII */
-+#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_SGMII	0x4
- #define MII_88E1510_GEN_CTRL_REG_1_RESET	0x8000	/* Soft reset */
- 
- #define MII_VCT5_TX_RX_MDI0_COUPLING	0x10
-@@ -2505,6 +2514,100 @@ static int marvell_probe(struct phy_devi
- 	return marvell_hwmon_probe(phydev);
- }
- 
-+static int m88e1510_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-+{
-+	struct phy_device *phydev = upstream;
-+	phy_interface_t interface;
-+	struct device *dev;
-+	int oldpage;
-+	int ret = 0;
-+	u16 mode;
-+
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
-+
-+	dev = &phydev->mdio.dev;
-+
-+	sfp_parse_support(phydev->sfp_bus, id, supported);
-+	interface = sfp_select_interface(phydev->sfp_bus, supported);
-+
-+	dev_info(dev, "%s SFP module inserted\n", phy_modes(interface));
-+
-+	switch (interface) {
-+	case PHY_INTERFACE_MODE_1000BASEX:
-+		mode = MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_1000X;
-+
-+		break;
-+	case PHY_INTERFACE_MODE_100BASEX:
-+		mode = MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_100FX;
-+
-+		break;
-+	case PHY_INTERFACE_MODE_SGMII:
-+		mode = MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_SGMII;
-+
-+		break;
-+	default:
-+		dev_err(dev, "Incompatible SFP module inserted\n");
-+
-+		return -EINVAL;
-+	}
-+
-+	oldpage = phy_select_page(phydev, MII_MARVELL_MODE_PAGE);
-+	if (oldpage < 0)
-+		goto error;
-+
-+	ret = __phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1,
-+			   MII_88E1510_GEN_CTRL_REG_1_MODE_MASK, mode);
-+	if (ret < 0)
-+		goto error;
-+
-+	ret = __phy_set_bits(phydev, MII_88E1510_GEN_CTRL_REG_1,
-+			     MII_88E1510_GEN_CTRL_REG_1_RESET);
-+
-+error:
-+	return phy_restore_page(phydev, oldpage, ret);
-+}
-+
-+static void m88e1510_sfp_remove(void *upstream)
-+{
-+	struct phy_device *phydev = upstream;
-+	int oldpage;
-+	int ret = 0;
-+
-+	oldpage = phy_select_page(phydev, MII_MARVELL_MODE_PAGE);
-+	if (oldpage < 0)
-+		goto error;
-+
-+	ret = __phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1,
-+			   MII_88E1510_GEN_CTRL_REG_1_MODE_MASK,
-+			   MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII);
-+	if (ret < 0)
-+		goto error;
-+
-+	ret = __phy_set_bits(phydev, MII_88E1510_GEN_CTRL_REG_1,
-+			     MII_88E1510_GEN_CTRL_REG_1_RESET);
-+
-+error:
-+	phy_restore_page(phydev, oldpage, ret);
-+}
-+
-+static const struct sfp_upstream_ops m88e1510_sfp_ops = {
-+	.module_insert = m88e1510_sfp_insert,
-+	.module_remove = m88e1510_sfp_remove,
-+	.attach = phy_sfp_attach,
-+	.detach = phy_sfp_detach,
-+};
-+
-+static int m88e1510_probe(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	err = marvell_probe(phydev);
-+	if (err)
-+		return err;
-+
-+	return phy_sfp_probe(phydev, &m88e1510_sfp_ops);
-+}
-+
- static struct phy_driver marvell_drivers[] = {
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E1101,
-@@ -2711,7 +2814,7 @@ static struct phy_driver marvell_drivers
- 		.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
- 		.features = PHY_GBIT_FIBRE_FEATURES,
- 		.flags = PHY_POLL_CABLE_TEST,
--		.probe = marvell_probe,
-+		.probe = m88e1510_probe,
- 		.config_init = m88e1510_config_init,
- 		.config_aneg = m88e1510_config_aneg,
- 		.read_status = marvell_read_status,
diff --git a/target/linux/generic/backport-5.10/719-v5.12-net-dsa-automatically-bring-up-DSA-master-when-openi.patch b/target/linux/generic/backport-5.10/719-v5.12-net-dsa-automatically-bring-up-DSA-master-when-openi.patch
deleted file mode 100644
index 3b630377f9a9..000000000000
--- a/target/linux/generic/backport-5.10/719-v5.12-net-dsa-automatically-bring-up-DSA-master-when-openi.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 9d5ef190e5615a7b63af89f88c4106a5bc127974 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 5 Feb 2021 15:37:10 +0200
-Subject: [PATCH] net: dsa: automatically bring up DSA master when opening user
- port
-
-DSA wants the master interface to be open before the user port is due to
-historical reasons. The promiscuity of interfaces that are down used to
-have issues, as referenced Lennert Buytenhek in commit df02c6ff2e39
-("dsa: fix master interface allmulti/promisc handling").
-
-The bugfix mentioned there, commit b6c40d68ff64 ("net: only invoke
-dev->change_rx_flags when device is UP"), was basically a "don't do
-that" approach to working around the promiscuity while down issue.
-
-Further work done by Vlad Yasevich in commit d2615bf45069 ("net: core:
-Always propagate flag changes to interfaces") has resolved the
-underlying issue, and it is strictly up to the DSA and 8021q drivers
-now, it is no longer mandated by the networking core that the master
-interface must be up when changing its promiscuity.
-
-From DSA's point of view, deciding to error out in dsa_slave_open
-because the master isn't up is
-(a) a bad user experience and
-(b) knocking at an open door.
-Even if there still was an issue with promiscuity while down, DSA could
-still just open the master and avoid it.
-
-Doing it this way has the additional benefit that user space can now
-remove DSA-specific workarounds, like systemd-networkd with BindCarrier:
-https://github.com/systemd/systemd/issues/7478
-
-And we can finally remove one of the 2 bullets in the "Common pitfalls
-using DSA setups" chapter.
-
-Tested with two cascaded DSA switches:
-
-$ ip link set sw0p2 up
-fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode
-fsl_enetc 0000:00:00.2 eno2: Link is Up - 1Gbps/Full - flow control rx/tx
-mscc_felix 0000:00:00.5 swp0: configuring for fixed/sgmii link mode
-mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control off
-8021q: adding VLAN 0 to HW filter on device swp0
-sja1105 spi2.0 sw0p2: configuring for phy/rgmii-id link mode
-IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
-IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- Documentation/networking/dsa/dsa.rst | 4 ----
- net/dsa/slave.c                      | 7 +++++--
- 2 files changed, 5 insertions(+), 6 deletions(-)
-
---- a/Documentation/networking/dsa/dsa.rst
-+++ b/Documentation/networking/dsa/dsa.rst
-@@ -273,10 +273,6 @@ will not make us go through the switch t
- the Ethernet switch on the other end, expecting a tag will typically drop this
- frame.
- 
--Slave network devices check that the master network device is UP before allowing
--you to administratively bring UP these slave network devices. A common
--configuration mistake is forgetting to bring UP the master network device first.
--
- Interactions with other subsystems
- ==================================
- 
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -68,8 +68,11 @@ static int dsa_slave_open(struct net_dev
- 	struct dsa_port *dp = dsa_slave_to_port(dev);
- 	int err;
- 
--	if (!(master->flags & IFF_UP))
--		return -ENETDOWN;
-+	err = dev_open(master, NULL);
-+	if (err < 0) {
-+		netdev_err(dev, "failed to open master %s\n", master->name);
-+		goto out;
-+	}
- 
- 	if (!ether_addr_equal(dev->dev_addr, master->dev_addr)) {
- 		err = dev_uc_add(master, dev->dev_addr);
diff --git a/target/linux/generic/backport-5.10/720-v5.12-net-bridge-notify-switchdev-of-disappearance-of-old-.patch b/target/linux/generic/backport-5.10/720-v5.12-net-bridge-notify-switchdev-of-disappearance-of-old-.patch
deleted file mode 100644
index c43cb4d1f2eb..000000000000
--- a/target/linux/generic/backport-5.10/720-v5.12-net-bridge-notify-switchdev-of-disappearance-of-old-.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From 90dc8fd36078a536671adae884d0b929cce6480a Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 6 Jan 2021 11:51:30 +0200
-Subject: [PATCH] net: bridge: notify switchdev of disappearance of old FDB
- entry upon migration
-
-Currently the bridge emits atomic switchdev notifications for
-dynamically learnt FDB entries. Monitoring these notifications works
-wonders for switchdev drivers that want to keep their hardware FDB in
-sync with the bridge's FDB.
-
-For example station A wants to talk to station B in the diagram below,
-and we are concerned with the behavior of the bridge on the DUT device:
-
-                   DUT
- +-------------------------------------+
- |                 br0                 |
- | +------+ +------+ +------+ +------+ |
- | |      | |      | |      | |      | |
- | | swp0 | | swp1 | | swp2 | | eth0 | |
- +-------------------------------------+
-      |        |                  |
-  Station A    |                  |
-               |                  |
-         +--+------+--+    +--+------+--+
-         |  |      |  |    |  |      |  |
-         |  | swp0 |  |    |  | swp0 |  |
- Another |  +------+  |    |  +------+  | Another
-  switch |     br0    |    |     br0    | switch
-         |  +------+  |    |  +------+  |
-         |  |      |  |    |  |      |  |
-         |  | swp1 |  |    |  | swp1 |  |
-         +--+------+--+    +--+------+--+
-                                  |
-                              Station B
-
-Interfaces swp0, swp1, swp2 are handled by a switchdev driver that has
-the following property: frames injected from its control interface bypass
-the internal address analyzer logic, and therefore, this hardware does
-not learn from the source address of packets transmitted by the network
-stack through it. So, since bridging between eth0 (where Station B is
-attached) and swp0 (where Station A is attached) is done in software,
-the switchdev hardware will never learn the source address of Station B.
-So the traffic towards that destination will be treated as unknown, i.e.
-flooded.
-
-This is where the bridge notifications come in handy. When br0 on the
-DUT sees frames with Station B's MAC address on eth0, the switchdev
-driver gets these notifications and can install a rule to send frames
-towards Station B's address that are incoming from swp0, swp1, swp2,
-only towards the control interface. This is all switchdev driver private
-business, which the notification makes possible.
-
-All is fine until someone unplugs Station B's cable and moves it to the
-other switch:
-
-                   DUT
- +-------------------------------------+
- |                 br0                 |
- | +------+ +------+ +------+ +------+ |
- | |      | |      | |      | |      | |
- | | swp0 | | swp1 | | swp2 | | eth0 | |
- +-------------------------------------+
-      |        |                  |
-  Station A    |                  |
-               |                  |
-         +--+------+--+    +--+------+--+
-         |  |      |  |    |  |      |  |
-         |  | swp0 |  |    |  | swp0 |  |
- Another |  +------+  |    |  +------+  | Another
-  switch |     br0    |    |     br0    | switch
-         |  +------+  |    |  +------+  |
-         |  |      |  |    |  |      |  |
-         |  | swp1 |  |    |  | swp1 |  |
-         +--+------+--+    +--+------+--+
-               |
-           Station B
-
-Luckily for the use cases we care about, Station B is noisy enough that
-the DUT hears it (on swp1 this time). swp1 receives the frames and
-delivers them to the bridge, who enters the unlikely path in br_fdb_update
-of updating an existing entry. It moves the entry in the software bridge
-to swp1 and emits an addition notification towards that.
-
-As far as the switchdev driver is concerned, all that it needs to ensure
-is that traffic between Station A and Station B is not forever broken.
-If it does nothing, then the stale rule to send frames for Station B
-towards the control interface remains in place. But Station B is no
-longer reachable via the control interface, but via a port that can
-offload the bridge port learning attribute. It's just that the port is
-prevented from learning this address, since the rule overrides FDB
-updates. So the rule needs to go. The question is via what mechanism.
-
-It sure would be possible for this switchdev driver to keep track of all
-addresses which are sent to the control interface, and then also listen
-for bridge notifier events on its own ports, searching for the ones that
-have a MAC address which was previously sent to the control interface.
-But this is cumbersome and inefficient. Instead, with one small change,
-the bridge could notify of the address deletion from the old port, in a
-symmetrical manner with how it did for the insertion. Then the switchdev
-driver would not be required to monitor learn/forget events for its own
-ports. It could just delete the rule towards the control interface upon
-bridge entry migration. This would make hardware address learning be
-possible again. Then it would take a few more packets until the hardware
-and software FDB would be in sync again.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
-Reviewed-by: Ido Schimmel <idosch@nvidia.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- net/bridge/br_fdb.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/net/bridge/br_fdb.c
-+++ b/net/bridge/br_fdb.c
-@@ -602,6 +602,7 @@ void br_fdb_update(struct net_bridge *br
- 			/* fastpath: update of existing entry */
- 			if (unlikely(source != fdb->dst &&
- 				     !test_bit(BR_FDB_STICKY, &fdb->flags))) {
-+				br_switchdev_fdb_notify(fdb, RTM_DELNEIGH);
- 				fdb->dst = source;
- 				fdb_modified = true;
- 				/* Take over HW learned entry */
diff --git a/target/linux/generic/backport-5.10/721-v5.12-net-dsa-be-louder-when-a-non-legacy-FDB-operation-fa.patch b/target/linux/generic/backport-5.10/721-v5.12-net-dsa-be-louder-when-a-non-legacy-FDB-operation-fa.patch
deleted file mode 100644
index f9337590f77b..000000000000
--- a/target/linux/generic/backport-5.10/721-v5.12-net-dsa-be-louder-when-a-non-legacy-FDB-operation-fa.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 2fd186501b1cff155cc4a755c210793cfc0dffb5 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 6 Jan 2021 11:51:31 +0200
-Subject: [PATCH] net: dsa: be louder when a non-legacy FDB operation fails
-
-The dev_close() call was added in commit c9eb3e0f8701 ("net: dsa: Add
-support for learning FDB through notification") "to indicate inconsistent
-situation" when we could not delete an FDB entry from the port.
-
-bridge fdb del d8:58:d7:00:ca:6d dev swp0 self master
-
-It is a bit drastic and at the same time not helpful if the above fails
-to only print with netdev_dbg log level, but on the other hand to bring
-the interface down.
-
-So increase the verbosity of the error message, and drop dev_close().
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- net/dsa/slave.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -2112,7 +2112,9 @@ static void dsa_slave_switchdev_event_wo
- 
- 		err = dsa_port_fdb_add(dp, fdb_info->addr, fdb_info->vid);
- 		if (err) {
--			netdev_dbg(dev, "fdb add failed err=%d\n", err);
-+			netdev_err(dev,
-+				   "failed to add %pM vid %d to fdb: %d\n",
-+				   fdb_info->addr, fdb_info->vid, err);
- 			break;
- 		}
- 		fdb_info->offloaded = true;
-@@ -2127,9 +2129,11 @@ static void dsa_slave_switchdev_event_wo
- 
- 		err = dsa_port_fdb_del(dp, fdb_info->addr, fdb_info->vid);
- 		if (err) {
--			netdev_dbg(dev, "fdb del failed err=%d\n", err);
--			dev_close(dev);
-+			netdev_err(dev,
-+				   "failed to delete %pM vid %d from fdb: %d\n",
-+				   fdb_info->addr, fdb_info->vid, err);
- 		}
-+
- 		break;
- 	}
- 	rtnl_unlock();
diff --git a/target/linux/generic/backport-5.10/722-v5.12-net-dsa-don-t-use-switchdev_notifier_fdb_info-in-dsa.patch b/target/linux/generic/backport-5.10/722-v5.12-net-dsa-don-t-use-switchdev_notifier_fdb_info-in-dsa.patch
deleted file mode 100644
index c1aa8fda8222..000000000000
--- a/target/linux/generic/backport-5.10/722-v5.12-net-dsa-don-t-use-switchdev_notifier_fdb_info-in-dsa.patch
+++ /dev/null
@@ -1,226 +0,0 @@
-From c4bb76a9a0ef87c4cc1f636defed5f12deb9f5a7 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 6 Jan 2021 11:51:32 +0200
-Subject: [PATCH] net: dsa: don't use switchdev_notifier_fdb_info in
- dsa_switchdev_event_work
-
-Currently DSA doesn't add FDB entries on the CPU port, because it only
-does so through switchdev, which is associated with a net_device, and
-there are none of those for the CPU port.
-
-But actually FDB addresses on the CPU port have some use cases of their
-own, if the switchdev operations are initiated from within the DSA
-layer. There is just one problem with the existing code: it passes a
-structure in dsa_switchdev_event_work which was retrieved directly from
-switchdev, so it contains a net_device. We need to generalize the
-contents to something that covers the CPU port as well: the "ds, port"
-tuple is fine for that.
-
-Note that the new procedure for notifying the successful FDB offload is
-inspired from the rocker model.
-
-Also, nothing was being done if added_by_user was false. Let's check for
-that a lot earlier, and don't actually bother to schedule the worker
-for nothing.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- net/dsa/dsa_priv.h |  12 +++++
- net/dsa/slave.c    | 106 ++++++++++++++++++++++-----------------------
- 2 files changed, 65 insertions(+), 53 deletions(-)
-
---- a/net/dsa/dsa_priv.h
-+++ b/net/dsa/dsa_priv.h
-@@ -73,6 +73,18 @@ struct dsa_notifier_mtu_info {
- 	int mtu;
- };
- 
-+struct dsa_switchdev_event_work {
-+	struct dsa_switch *ds;
-+	int port;
-+	struct work_struct work;
-+	unsigned long event;
-+	/* Specific for SWITCHDEV_FDB_ADD_TO_DEVICE and
-+	 * SWITCHDEV_FDB_DEL_TO_DEVICE
-+	 */
-+	unsigned char addr[ETH_ALEN];
-+	u16 vid;
-+};
-+
- struct dsa_slave_priv {
- 	/* Copy of CPU port xmit for faster access in slave transmit hot path */
- 	struct sk_buff *	(*xmit)(struct sk_buff *skb,
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -2087,76 +2087,66 @@ static int dsa_slave_netdevice_event(str
- 	return NOTIFY_DONE;
- }
- 
--struct dsa_switchdev_event_work {
--	struct work_struct work;
--	struct switchdev_notifier_fdb_info fdb_info;
--	struct net_device *dev;
--	unsigned long event;
--};
-+static void
-+dsa_fdb_offload_notify(struct dsa_switchdev_event_work *switchdev_work)
-+{
-+	struct dsa_switch *ds = switchdev_work->ds;
-+	struct switchdev_notifier_fdb_info info;
-+	struct dsa_port *dp;
-+
-+	if (!dsa_is_user_port(ds, switchdev_work->port))
-+		return;
-+
-+	info.addr = switchdev_work->addr;
-+	info.vid = switchdev_work->vid;
-+	info.offloaded = true;
-+	dp = dsa_to_port(ds, switchdev_work->port);
-+	call_switchdev_notifiers(SWITCHDEV_FDB_OFFLOADED,
-+				 dp->slave, &info.info, NULL);
-+}
- 
- static void dsa_slave_switchdev_event_work(struct work_struct *work)
- {
- 	struct dsa_switchdev_event_work *switchdev_work =
- 		container_of(work, struct dsa_switchdev_event_work, work);
--	struct net_device *dev = switchdev_work->dev;
--	struct switchdev_notifier_fdb_info *fdb_info;
--	struct dsa_port *dp = dsa_slave_to_port(dev);
-+	struct dsa_switch *ds = switchdev_work->ds;
-+	struct dsa_port *dp;
- 	int err;
- 
-+	dp = dsa_to_port(ds, switchdev_work->port);
-+
- 	rtnl_lock();
- 	switch (switchdev_work->event) {
- 	case SWITCHDEV_FDB_ADD_TO_DEVICE:
--		fdb_info = &switchdev_work->fdb_info;
--		if (!fdb_info->added_by_user)
--			break;
--
--		err = dsa_port_fdb_add(dp, fdb_info->addr, fdb_info->vid);
-+		err = dsa_port_fdb_add(dp, switchdev_work->addr,
-+				       switchdev_work->vid);
- 		if (err) {
--			netdev_err(dev,
--				   "failed to add %pM vid %d to fdb: %d\n",
--				   fdb_info->addr, fdb_info->vid, err);
-+			dev_err(ds->dev,
-+				"port %d failed to add %pM vid %d to fdb: %d\n",
-+				dp->index, switchdev_work->addr,
-+				switchdev_work->vid, err);
- 			break;
- 		}
--		fdb_info->offloaded = true;
--		call_switchdev_notifiers(SWITCHDEV_FDB_OFFLOADED, dev,
--					 &fdb_info->info, NULL);
-+		dsa_fdb_offload_notify(switchdev_work);
- 		break;
- 
- 	case SWITCHDEV_FDB_DEL_TO_DEVICE:
--		fdb_info = &switchdev_work->fdb_info;
--		if (!fdb_info->added_by_user)
--			break;
--
--		err = dsa_port_fdb_del(dp, fdb_info->addr, fdb_info->vid);
-+		err = dsa_port_fdb_del(dp, switchdev_work->addr,
-+				       switchdev_work->vid);
- 		if (err) {
--			netdev_err(dev,
--				   "failed to delete %pM vid %d from fdb: %d\n",
--				   fdb_info->addr, fdb_info->vid, err);
-+			dev_err(ds->dev,
-+				"port %d failed to delete %pM vid %d from fdb: %d\n",
-+				dp->index, switchdev_work->addr,
-+				switchdev_work->vid, err);
- 		}
- 
- 		break;
- 	}
- 	rtnl_unlock();
- 
--	kfree(switchdev_work->fdb_info.addr);
- 	kfree(switchdev_work);
--	dev_put(dev);
--}
--
--static int
--dsa_slave_switchdev_fdb_work_init(struct dsa_switchdev_event_work *
--				  switchdev_work,
--				  const struct switchdev_notifier_fdb_info *
--				  fdb_info)
--{
--	memcpy(&switchdev_work->fdb_info, fdb_info,
--	       sizeof(switchdev_work->fdb_info));
--	switchdev_work->fdb_info.addr = kzalloc(ETH_ALEN, GFP_ATOMIC);
--	if (!switchdev_work->fdb_info.addr)
--		return -ENOMEM;
--	ether_addr_copy((u8 *)switchdev_work->fdb_info.addr,
--			fdb_info->addr);
--	return 0;
-+	if (dsa_is_user_port(ds, dp->index))
-+		dev_put(dp->slave);
- }
- 
- /* Called under rcu_read_lock() */
-@@ -2164,7 +2154,9 @@ static int dsa_slave_switchdev_event(str
- 				     unsigned long event, void *ptr)
- {
- 	struct net_device *dev = switchdev_notifier_info_to_dev(ptr);
-+	const struct switchdev_notifier_fdb_info *fdb_info;
- 	struct dsa_switchdev_event_work *switchdev_work;
-+	struct dsa_port *dp;
- 	int err;
- 
- 	if (event == SWITCHDEV_PORT_ATTR_SET) {
-@@ -2177,20 +2169,32 @@ static int dsa_slave_switchdev_event(str
- 	if (!dsa_slave_dev_check(dev))
- 		return NOTIFY_DONE;
- 
-+	dp = dsa_slave_to_port(dev);
-+
- 	switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC);
- 	if (!switchdev_work)
- 		return NOTIFY_BAD;
- 
- 	INIT_WORK(&switchdev_work->work,
- 		  dsa_slave_switchdev_event_work);
--	switchdev_work->dev = dev;
-+	switchdev_work->ds = dp->ds;
-+	switchdev_work->port = dp->index;
- 	switchdev_work->event = event;
- 
- 	switch (event) {
- 	case SWITCHDEV_FDB_ADD_TO_DEVICE:
- 	case SWITCHDEV_FDB_DEL_TO_DEVICE:
--		if (dsa_slave_switchdev_fdb_work_init(switchdev_work, ptr))
--			goto err_fdb_work_init;
-+		fdb_info = ptr;
-+
-+		if (!fdb_info->added_by_user) {
-+			kfree(switchdev_work);
-+			return NOTIFY_OK;
-+		}
-+
-+		ether_addr_copy(switchdev_work->addr,
-+				fdb_info->addr);
-+		switchdev_work->vid = fdb_info->vid;
-+
- 		dev_hold(dev);
- 		break;
- 	default:
-@@ -2200,10 +2204,6 @@ static int dsa_slave_switchdev_event(str
- 
- 	dsa_schedule_work(&switchdev_work->work);
- 	return NOTIFY_OK;
--
--err_fdb_work_init:
--	kfree(switchdev_work);
--	return NOTIFY_BAD;
- }
- 
- static int dsa_slave_switchdev_blocking_event(struct notifier_block *unused,
diff --git a/target/linux/generic/backport-5.10/723-v5.12-net-dsa-move-switchdev-event-implementation-under-th.patch b/target/linux/generic/backport-5.10/723-v5.12-net-dsa-move-switchdev-event-implementation-under-th.patch
deleted file mode 100644
index 9131df70d335..000000000000
--- a/target/linux/generic/backport-5.10/723-v5.12-net-dsa-move-switchdev-event-implementation-under-th.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 447d290a58bd335d68f665713842365d3d6447df Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 6 Jan 2021 11:51:33 +0200
-Subject: [PATCH] net: dsa: move switchdev event implementation under the same
- switch/case statement
-
-We'll need to start listening to SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE
-events even for interfaces where dsa_slave_dev_check returns false, so
-we need that check inside the switch-case statement for SWITCHDEV_FDB_*.
-
-This movement also avoids a useless allocation / free of switchdev_work
-on the untreated "default event" case.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- net/dsa/slave.c | 35 ++++++++++++++++-------------------
- 1 file changed, 16 insertions(+), 19 deletions(-)
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -2159,31 +2159,29 @@ static int dsa_slave_switchdev_event(str
- 	struct dsa_port *dp;
- 	int err;
- 
--	if (event == SWITCHDEV_PORT_ATTR_SET) {
-+	switch (event) {
-+	case SWITCHDEV_PORT_ATTR_SET:
- 		err = switchdev_handle_port_attr_set(dev, ptr,
- 						     dsa_slave_dev_check,
- 						     dsa_slave_port_attr_set);
- 		return notifier_from_errno(err);
--	}
--
--	if (!dsa_slave_dev_check(dev))
--		return NOTIFY_DONE;
-+	case SWITCHDEV_FDB_ADD_TO_DEVICE:
-+	case SWITCHDEV_FDB_DEL_TO_DEVICE:
-+		if (!dsa_slave_dev_check(dev))
-+			return NOTIFY_DONE;
- 
--	dp = dsa_slave_to_port(dev);
-+		dp = dsa_slave_to_port(dev);
- 
--	switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC);
--	if (!switchdev_work)
--		return NOTIFY_BAD;
--
--	INIT_WORK(&switchdev_work->work,
--		  dsa_slave_switchdev_event_work);
--	switchdev_work->ds = dp->ds;
--	switchdev_work->port = dp->index;
--	switchdev_work->event = event;
-+		switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC);
-+		if (!switchdev_work)
-+			return NOTIFY_BAD;
-+
-+		INIT_WORK(&switchdev_work->work,
-+			  dsa_slave_switchdev_event_work);
-+		switchdev_work->ds = dp->ds;
-+		switchdev_work->port = dp->index;
-+		switchdev_work->event = event;
- 
--	switch (event) {
--	case SWITCHDEV_FDB_ADD_TO_DEVICE:
--	case SWITCHDEV_FDB_DEL_TO_DEVICE:
- 		fdb_info = ptr;
- 
- 		if (!fdb_info->added_by_user) {
-@@ -2196,13 +2194,12 @@ static int dsa_slave_switchdev_event(str
- 		switchdev_work->vid = fdb_info->vid;
- 
- 		dev_hold(dev);
-+		dsa_schedule_work(&switchdev_work->work);
- 		break;
- 	default:
--		kfree(switchdev_work);
- 		return NOTIFY_DONE;
- 	}
- 
--	dsa_schedule_work(&switchdev_work->work);
- 	return NOTIFY_OK;
- }
- 
diff --git a/target/linux/generic/backport-5.10/724-v5.12-net-dsa-exit-early-in-dsa_slave_switchdev_event-if-w.patch b/target/linux/generic/backport-5.10/724-v5.12-net-dsa-exit-early-in-dsa_slave_switchdev_event-if-w.patch
deleted file mode 100644
index b7b6ebe461f8..000000000000
--- a/target/linux/generic/backport-5.10/724-v5.12-net-dsa-exit-early-in-dsa_slave_switchdev_event-if-w.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 5fb4a451a87d8ed3363d28b63a3295399373d6c4 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 6 Jan 2021 11:51:34 +0200
-Subject: [PATCH] net: dsa: exit early in dsa_slave_switchdev_event if we can't
- program the FDB
-
-Right now, the following would happen for a switch driver that does not
-implement .port_fdb_add or .port_fdb_del.
-
-dsa_slave_switchdev_event returns NOTIFY_OK and schedules:
--> dsa_slave_switchdev_event_work
-   -> dsa_port_fdb_add
-      -> dsa_port_notify(DSA_NOTIFIER_FDB_ADD)
-         -> dsa_switch_fdb_add
-            -> if (!ds->ops->port_fdb_add) return -EOPNOTSUPP;
-   -> an error is printed with dev_dbg, and
-      dsa_fdb_offload_notify(switchdev_work) is not called.
-
-We can avoid scheduling the worker for nothing and say NOTIFY_DONE.
-Because we don't call dsa_fdb_offload_notify, the static FDB entry will
-remain just in the software bridge.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- net/dsa/slave.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -2172,6 +2172,9 @@ static int dsa_slave_switchdev_event(str
- 
- 		dp = dsa_slave_to_port(dev);
- 
-+		if (!dp->ds->ops->port_fdb_add || !dp->ds->ops->port_fdb_del)
-+			return NOTIFY_DONE;
-+
- 		switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC);
- 		if (!switchdev_work)
- 			return NOTIFY_BAD;
diff --git a/target/linux/generic/backport-5.10/725-v5.12-net-dsa-listen-for-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch b/target/linux/generic/backport-5.10/725-v5.12-net-dsa-listen-for-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch
deleted file mode 100644
index e7b9af19515c..000000000000
--- a/target/linux/generic/backport-5.10/725-v5.12-net-dsa-listen-for-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch
+++ /dev/null
@@ -1,264 +0,0 @@
-From d5f19486cee79d04c054427577ac96ed123706db Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Wed, 6 Jan 2021 11:51:35 +0200
-Subject: [PATCH] net: dsa: listen for SWITCHDEV_{FDB,DEL}_ADD_TO_DEVICE on
- foreign bridge neighbors
-
-Some DSA switches (and not only) cannot learn source MAC addresses from
-packets injected from the CPU. They only perform hardware address
-learning from inbound traffic.
-
-This can be problematic when we have a bridge spanning some DSA switch
-ports and some non-DSA ports (which we'll call "foreign interfaces" from
-DSA's perspective).
-
-There are 2 classes of problems created by the lack of learning on
-CPU-injected traffic:
-- excessive flooding, due to the fact that DSA treats those addresses as
-  unknown
-- the risk of stale routes, which can lead to temporary packet loss
-
-To illustrate the second class, consider the following situation, which
-is common in production equipment (wireless access points, where there
-is a WLAN interface and an Ethernet switch, and these form a single
-bridging domain).
-
- AP 1:
- +------------------------------------------------------------------------+
- |                                          br0                           |
- +------------------------------------------------------------------------+
- +------------+ +------------+ +------------+ +------------+ +------------+
- |    swp0    | |    swp1    | |    swp2    | |    swp3    | |    wlan0   |
- +------------+ +------------+ +------------+ +------------+ +------------+
-       |                                                       ^        ^
-       |                                                       |        |
-       |                                                       |        |
-       |                                                    Client A  Client B
-       |
-       |
-       |
- +------------+ +------------+ +------------+ +------------+ +------------+
- |    swp0    | |    swp1    | |    swp2    | |    swp3    | |    wlan0   |
- +------------+ +------------+ +------------+ +------------+ +------------+
- +------------------------------------------------------------------------+
- |                                          br0                           |
- +------------------------------------------------------------------------+
- AP 2
-
-- br0 of AP 1 will know that Clients A and B are reachable via wlan0
-- the hardware fdb of a DSA switch driver today is not kept in sync with
-  the software entries on other bridge ports, so it will not know that
-  clients A and B are reachable via the CPU port UNLESS the hardware
-  switch itself performs SA learning from traffic injected from the CPU.
-  Nonetheless, a substantial number of switches don't.
-- the hardware fdb of the DSA switch on AP 2 may autonomously learn that
-  Client A and B are reachable through swp0. Therefore, the software br0
-  of AP 2 also may or may not learn this. In the example we're
-  illustrating, some Ethernet traffic has been going on, and br0 from AP
-  2 has indeed learnt that it can reach Client B through swp0.
-
-One of the wireless clients, say Client B, disconnects from AP 1 and
-roams to AP 2. The topology now looks like this:
-
- AP 1:
- +------------------------------------------------------------------------+
- |                                          br0                           |
- +------------------------------------------------------------------------+
- +------------+ +------------+ +------------+ +------------+ +------------+
- |    swp0    | |    swp1    | |    swp2    | |    swp3    | |    wlan0   |
- +------------+ +------------+ +------------+ +------------+ +------------+
-       |                                                            ^
-       |                                                            |
-       |                                                         Client A
-       |
-       |
-       |                                                         Client B
-       |                                                            |
-       |                                                            v
- +------------+ +------------+ +------------+ +------------+ +------------+
- |    swp0    | |    swp1    | |    swp2    | |    swp3    | |    wlan0   |
- +------------+ +------------+ +------------+ +------------+ +------------+
- +------------------------------------------------------------------------+
- |                                          br0                           |
- +------------------------------------------------------------------------+
- AP 2
-
-- br0 of AP 1 still knows that Client A is reachable via wlan0 (no change)
-- br0 of AP 1 will (possibly) know that Client B has left wlan0. There
-  are cases where it might never find out though. Either way, DSA today
-  does not process that notification in any way.
-- the hardware FDB of the DSA switch on AP 1 may learn autonomously that
-  Client B can be reached via swp0, if it receives any packet with
-  Client 1's source MAC address over Ethernet.
-- the hardware FDB of the DSA switch on AP 2 still thinks that Client B
-  can be reached via swp0. It does not know that it has roamed to wlan0,
-  because it doesn't perform SA learning from the CPU port.
-
-Now Client A contacts Client B.
-AP 1 routes the packet fine towards swp0 and delivers it on the Ethernet
-segment.
-AP 2 sees a frame on swp0 and its fdb says that the destination is swp0.
-Hairpinning is disabled => drop.
-
-This problem comes from the fact that these switches have a 'blind spot'
-for addresses coming from software bridging. The generic solution is not
-to assume that hardware learning can be enabled somehow, but to listen
-to more bridge learning events. It turns out that the bridge driver does
-learn in software from all inbound frames, in __br_handle_local_finish.
-A proper SWITCHDEV_FDB_ADD_TO_DEVICE notification is emitted for the
-addresses serviced by the bridge on 'foreign' interfaces. The software
-bridge also does the right thing on migration, by notifying that the old
-entry is deleted, so that does not need to be special-cased in DSA. When
-it is deleted, we just need to delete our static FDB entry towards the
-CPU too, and wait.
-
-The problem is that DSA currently only cares about SWITCHDEV_FDB_ADD_TO_DEVICE
-events received on its own interfaces, such as static FDB entries.
-
-Luckily we can change that, and DSA can listen to all switchdev FDB
-add/del events in the system and figure out if those events were emitted
-by a bridge that spans at least one of DSA's own ports. In case that is
-true, DSA will also offload that address towards its own CPU port, in
-the eventuality that there might be bridge clients attached to the DSA
-switch who want to talk to the station connected to the foreign
-interface.
-
-In terms of implementation, we need to keep the fdb_info->added_by_user
-check for the case where the switchdev event was targeted directly at a
-DSA switch port. But we don't need to look at that flag for snooped
-events. So the check is currently too late, we need to move it earlier.
-This also simplifies the code a bit, since we avoid uselessly allocating
-and freeing switchdev_work.
-
-We could probably do some improvements in the future. For example,
-multi-bridge support is rudimentary at the moment. If there are two
-bridges spanning a DSA switch's ports, and both of them need to service
-the same MAC address, then what will happen is that the migration of one
-of those stations will trigger the deletion of the FDB entry from the
-CPU port while it is still used by other bridge. That could be improved
-with reference counting but is left for another time.
-
-This behavior needs to be enabled at driver level by setting
-ds->assisted_learning_on_cpu_port = true. This is because we don't want
-to inflict a potential performance penalty (accesses through
-MDIO/I2C/SPI are expensive) to hardware that really doesn't need it
-because address learning on the CPU port works there.
-
-Reported-by: DENG Qingfang <dqfext@gmail.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- include/net/dsa.h |  5 +++++
- net/dsa/slave.c   | 66 +++++++++++++++++++++++++++++++++++++++++++++----------
- 2 files changed, 60 insertions(+), 11 deletions(-)
-
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -317,6 +317,11 @@ struct dsa_switch {
- 	 */
- 	bool			untag_bridge_pvid;
- 
-+	/* Let DSA manage the FDB entries towards the CPU, based on the
-+	 * software bridge database.
-+	 */
-+	bool			assisted_learning_on_cpu_port;
-+
- 	/* In case vlan_filtering_is_global is set, the VLAN awareness state
- 	 * should be retrieved from here and not from the per-port settings.
- 	 */
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -2149,6 +2149,28 @@ static void dsa_slave_switchdev_event_wo
- 		dev_put(dp->slave);
- }
- 
-+static int dsa_lower_dev_walk(struct net_device *lower_dev,
-+			      struct netdev_nested_priv *priv)
-+{
-+	if (dsa_slave_dev_check(lower_dev)) {
-+		priv->data = (void *)netdev_priv(lower_dev);
-+		return 1;
-+	}
-+
-+	return 0;
-+}
-+
-+static struct dsa_slave_priv *dsa_slave_dev_lower_find(struct net_device *dev)
-+{
-+	struct netdev_nested_priv priv = {
-+		.data = NULL,
-+	};
-+
-+	netdev_walk_all_lower_dev_rcu(dev, dsa_lower_dev_walk, &priv);
-+
-+	return (struct dsa_slave_priv *)priv.data;
-+}
-+
- /* Called under rcu_read_lock() */
- static int dsa_slave_switchdev_event(struct notifier_block *unused,
- 				     unsigned long event, void *ptr)
-@@ -2167,10 +2189,37 @@ static int dsa_slave_switchdev_event(str
- 		return notifier_from_errno(err);
- 	case SWITCHDEV_FDB_ADD_TO_DEVICE:
- 	case SWITCHDEV_FDB_DEL_TO_DEVICE:
--		if (!dsa_slave_dev_check(dev))
--			return NOTIFY_DONE;
-+		fdb_info = ptr;
-+
-+		if (dsa_slave_dev_check(dev)) {
-+			if (!fdb_info->added_by_user)
-+				return NOTIFY_OK;
-+
-+			dp = dsa_slave_to_port(dev);
-+		} else {
-+			/* Snoop addresses learnt on foreign interfaces
-+			 * bridged with us, for switches that don't
-+			 * automatically learn SA from CPU-injected traffic
-+			 */
-+			struct net_device *br_dev;
-+			struct dsa_slave_priv *p;
-+
-+			br_dev = netdev_master_upper_dev_get_rcu(dev);
-+			if (!br_dev)
-+				return NOTIFY_DONE;
-+
-+			if (!netif_is_bridge_master(br_dev))
-+				return NOTIFY_DONE;
-+
-+			p = dsa_slave_dev_lower_find(br_dev);
-+			if (!p)
-+				return NOTIFY_DONE;
- 
--		dp = dsa_slave_to_port(dev);
-+			dp = p->dp->cpu_dp;
-+
-+			if (!dp->ds->assisted_learning_on_cpu_port)
-+				return NOTIFY_DONE;
-+		}
- 
- 		if (!dp->ds->ops->port_fdb_add || !dp->ds->ops->port_fdb_del)
- 			return NOTIFY_DONE;
-@@ -2185,18 +2234,13 @@ static int dsa_slave_switchdev_event(str
- 		switchdev_work->port = dp->index;
- 		switchdev_work->event = event;
- 
--		fdb_info = ptr;
--
--		if (!fdb_info->added_by_user) {
--			kfree(switchdev_work);
--			return NOTIFY_OK;
--		}
--
- 		ether_addr_copy(switchdev_work->addr,
- 				fdb_info->addr);
- 		switchdev_work->vid = fdb_info->vid;
- 
--		dev_hold(dev);
-+		/* Hold a reference on the slave for dsa_fdb_offload_notify */
-+		if (dsa_is_user_port(dp->ds, dp->index))
-+			dev_hold(dev);
- 		dsa_schedule_work(&switchdev_work->work);
- 		break;
- 	default:
diff --git a/target/linux/generic/backport-5.10/729-v5.14-net-phy-at803x-mask-1000-Base-X-link-mode.patch b/target/linux/generic/backport-5.10/729-v5.14-net-phy-at803x-mask-1000-Base-X-link-mode.patch
deleted file mode 100644
index a977db0b6c95..000000000000
--- a/target/linux/generic/backport-5.10/729-v5.14-net-phy-at803x-mask-1000-Base-X-link-mode.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From b856150c8098f12996ee81c3ab2a65adbaeeb3ec Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 27 Jun 2021 12:16:07 +0200
-Subject: [PATCH] net: phy: at803x: mask 1000 Base-X link mode
-
-AR8031/AR8033 have different status registers for copper
-and fiber operation. However, the extended status register
-is the same for both operation modes.
-
-As a result of that, ESTATUS_1000_XFULL is set to 1 even when
-operating in copper TP mode.
-
-Remove this mode from the supported link modes, as this driver
-currently only supports copper operation.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 30 +++++++++++++++++++++++++++++-
- 1 file changed, 29 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -583,6 +583,34 @@ static void at803x_remove(struct phy_dev
- 		regulator_disable(priv->vddio);
- }
- 
-+static int at803x_get_features(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	err = genphy_read_abilities(phydev);
-+	if (err)
-+		return err;
-+
-+	if (!at803x_match_phy_id(phydev, ATH8031_PHY_ID))
-+		return 0;
-+
-+	/* AR8031/AR8033 have different status registers
-+	 * for copper and fiber operation. However, the
-+	 * extended status register is the same for both
-+	 * operation modes.
-+	 *
-+	 * As a result of that, ESTATUS_1000_XFULL is set
-+	 * to 1 even when operating in copper TP mode.
-+	 *
-+	 * Remove this mode from the supported link modes,
-+	 * as this driver currently only supports copper
-+	 * operation.
-+	 */
-+	linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
-+			   phydev->supported);
-+	return 0;
-+}
-+
- static int at803x_clk_out_config(struct phy_device *phydev)
- {
- 	struct at803x_priv *priv = phydev->priv;
-@@ -1156,7 +1184,7 @@ static struct phy_driver at803x_driver[]
- 	.resume			= at803x_resume,
- 	.read_page		= at803x_read_page,
- 	.write_page		= at803x_write_page,
--	/* PHY_GBIT_FEATURES */
-+	.get_features		= at803x_get_features,
- 	.read_status		= at803x_read_status,
- 	.aneg_done		= at803x_aneg_done,
- 	.ack_interrupt		= &at803x_ack_interrupt,
diff --git a/target/linux/generic/backport-5.10/730-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch b/target/linux/generic/backport-5.10/730-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch
deleted file mode 100644
index f3a6f948ad1b..000000000000
--- a/target/linux/generic/backport-5.10/730-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From c3b8e07909dbe67b0d580416c1a5257643a73be7 Mon Sep 17 00:00:00 2001
-From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Date: Fri, 12 Mar 2021 00:07:03 -0800
-Subject: [PATCH] net: dsa: mt7530: setup core clock even in TRGMII mode
-
-A recent change to MIPS ralink reset logic made it so mt7530 actually
-resets the switch on platforms such as mt7621 (where bit 2 is the reset
-line for the switch). That exposed an issue where the switch would not
-function properly in TRGMII mode after a reset.
-
-Reconfigure core clock in TRGMII mode to fix the issue.
-
-Tested on Ubiquiti ER-X (MT7621) with TRGMII mode enabled.
-
-Fixes: 3f9ef7785a9c ("MIPS: ralink: manage low reset lines")
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 52 +++++++++++++++++++---------------------
- 1 file changed, 25 insertions(+), 27 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -436,34 +436,32 @@ mt7530_pad_clk_setup(struct dsa_switch *
- 			     TD_DM_DRVP(8) | TD_DM_DRVN(8));
- 
- 	/* Setup core clock for MT7530 */
--	if (!trgint) {
--		/* Disable MT7530 core clock */
--		core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
--
--		/* Disable PLL, since phy_device has not yet been created
--		 * provided for phy_[read,write]_mmd_indirect is called, we
--		 * provide our own core_write_mmd_indirect to complete this
--		 * function.
--		 */
--		core_write_mmd_indirect(priv,
--					CORE_GSWPLL_GRP1,
--					MDIO_MMD_VEND2,
--					0);
--
--		/* Set core clock into 500Mhz */
--		core_write(priv, CORE_GSWPLL_GRP2,
--			   RG_GSWPLL_POSDIV_500M(1) |
--			   RG_GSWPLL_FBKDIV_500M(25));
--
--		/* Enable PLL */
--		core_write(priv, CORE_GSWPLL_GRP1,
--			   RG_GSWPLL_EN_PRE |
--			   RG_GSWPLL_POSDIV_200M(2) |
--			   RG_GSWPLL_FBKDIV_200M(32));
--
--		/* Enable MT7530 core clock */
--		core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
--	}
-+	/* Disable MT7530 core clock */
-+	core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
-+
-+	/* Disable PLL, since phy_device has not yet been created
-+	 * provided for phy_[read,write]_mmd_indirect is called, we
-+	 * provide our own core_write_mmd_indirect to complete this
-+	 * function.
-+	 */
-+	core_write_mmd_indirect(priv,
-+				CORE_GSWPLL_GRP1,
-+				MDIO_MMD_VEND2,
-+				0);
-+
-+	/* Set core clock into 500Mhz */
-+	core_write(priv, CORE_GSWPLL_GRP2,
-+		   RG_GSWPLL_POSDIV_500M(1) |
-+		   RG_GSWPLL_FBKDIV_500M(25));
-+
-+	/* Enable PLL */
-+	core_write(priv, CORE_GSWPLL_GRP1,
-+		   RG_GSWPLL_EN_PRE |
-+		   RG_GSWPLL_POSDIV_200M(2) |
-+		   RG_GSWPLL_FBKDIV_200M(32));
-+
-+	/* Enable MT7530 core clock */
-+	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
- 
- 	/* Setup the MT7530 TRGMII Tx Clock */
- 	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
diff --git a/target/linux/generic/backport-5.10/731-v5.12-net-dsa-mt7530-MT7530-optional-GPIO-support.patch b/target/linux/generic/backport-5.10/731-v5.12-net-dsa-mt7530-MT7530-optional-GPIO-support.patch
deleted file mode 100644
index bd60df37e3f2..000000000000
--- a/target/linux/generic/backport-5.10/731-v5.12-net-dsa-mt7530-MT7530-optional-GPIO-support.patch
+++ /dev/null
@@ -1,181 +0,0 @@
-From 429a0edeefd88cbfca5c417dfb8561047bb50769 Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Mon, 25 Jan 2021 12:43:22 +0800
-Subject: [PATCH] net: dsa: mt7530: MT7530 optional GPIO support
-
-MT7530's LED controller can drive up to 15 LED/GPIOs.
-
-Add support for GPIO control and allow users to use its GPIOs by
-setting gpio-controller property in device tree.
-
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 110 +++++++++++++++++++++++++++++++++++++++
- drivers/net/dsa/mt7530.h |  20 +++++++
- 2 files changed, 130 insertions(+)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -18,6 +18,7 @@
- #include <linux/regulator/consumer.h>
- #include <linux/reset.h>
- #include <linux/gpio/consumer.h>
-+#include <linux/gpio/driver.h>
- #include <net/dsa.h>
- 
- #include "mt7530.h"
-@@ -1537,6 +1538,109 @@ mtk_get_tag_protocol(struct dsa_switch *
- 	}
- }
- 
-+static inline u32
-+mt7530_gpio_to_bit(unsigned int offset)
-+{
-+	/* Map GPIO offset to register bit
-+	 * [ 2: 0]  port 0 LED 0..2 as GPIO 0..2
-+	 * [ 6: 4]  port 1 LED 0..2 as GPIO 3..5
-+	 * [10: 8]  port 2 LED 0..2 as GPIO 6..8
-+	 * [14:12]  port 3 LED 0..2 as GPIO 9..11
-+	 * [18:16]  port 4 LED 0..2 as GPIO 12..14
-+	 */
-+	return BIT(offset + offset / 3);
-+}
-+
-+static int
-+mt7530_gpio_get(struct gpio_chip *gc, unsigned int offset)
-+{
-+	struct mt7530_priv *priv = gpiochip_get_data(gc);
-+	u32 bit = mt7530_gpio_to_bit(offset);
-+
-+	return !!(mt7530_read(priv, MT7530_LED_GPIO_DATA) & bit);
-+}
-+
-+static void
-+mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
-+{
-+	struct mt7530_priv *priv = gpiochip_get_data(gc);
-+	u32 bit = mt7530_gpio_to_bit(offset);
-+
-+	if (value)
-+		mt7530_set(priv, MT7530_LED_GPIO_DATA, bit);
-+	else
-+		mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit);
-+}
-+
-+static int
-+mt7530_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
-+{
-+	struct mt7530_priv *priv = gpiochip_get_data(gc);
-+	u32 bit = mt7530_gpio_to_bit(offset);
-+
-+	return (mt7530_read(priv, MT7530_LED_GPIO_DIR) & bit) ?
-+		GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
-+}
-+
-+static int
-+mt7530_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
-+{
-+	struct mt7530_priv *priv = gpiochip_get_data(gc);
-+	u32 bit = mt7530_gpio_to_bit(offset);
-+
-+	mt7530_clear(priv, MT7530_LED_GPIO_OE, bit);
-+	mt7530_clear(priv, MT7530_LED_GPIO_DIR, bit);
-+
-+	return 0;
-+}
-+
-+static int
-+mt7530_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
-+{
-+	struct mt7530_priv *priv = gpiochip_get_data(gc);
-+	u32 bit = mt7530_gpio_to_bit(offset);
-+
-+	mt7530_set(priv, MT7530_LED_GPIO_DIR, bit);
-+
-+	if (value)
-+		mt7530_set(priv, MT7530_LED_GPIO_DATA, bit);
-+	else
-+		mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit);
-+
-+	mt7530_set(priv, MT7530_LED_GPIO_OE, bit);
-+
-+	return 0;
-+}
-+
-+static int
-+mt7530_setup_gpio(struct mt7530_priv *priv)
-+{
-+	struct device *dev = priv->dev;
-+	struct gpio_chip *gc;
-+
-+	gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
-+	if (!gc)
-+		return -ENOMEM;
-+
-+	mt7530_write(priv, MT7530_LED_GPIO_OE, 0);
-+	mt7530_write(priv, MT7530_LED_GPIO_DIR, 0);
-+	mt7530_write(priv, MT7530_LED_IO_MODE, 0);
-+
-+	gc->label = "mt7530";
-+	gc->parent = dev;
-+	gc->owner = THIS_MODULE;
-+	gc->get_direction = mt7530_gpio_get_direction;
-+	gc->direction_input = mt7530_gpio_direction_input;
-+	gc->direction_output = mt7530_gpio_direction_output;
-+	gc->get = mt7530_gpio_get;
-+	gc->set = mt7530_gpio_set;
-+	gc->base = -1;
-+	gc->ngpio = 15;
-+	gc->can_sleep = true;
-+
-+	return devm_gpiochip_add_data(dev, gc, priv);
-+}
-+
- static int
- mt7530_setup(struct dsa_switch *ds)
- {
-@@ -1679,6 +1783,12 @@ mt7530_setup(struct dsa_switch *ds)
- 		}
- 	}
- 
-+	if (of_property_read_bool(priv->dev->of_node, "gpio-controller")) {
-+		ret = mt7530_setup_gpio(priv);
-+		if (ret)
-+			return ret;
-+	}
-+
- 	mt7530_setup_port5(ds, interface);
- 
- 	/* Flush the FDB table */
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -529,6 +529,26 @@ enum mt7531_clk_skew {
- #define  MT7531_GPIO12_RG_RXD3_MASK	GENMASK(19, 16)
- #define  MT7531_EXT_P_MDIO_12		(2 << 16)
- 
-+/* Registers for LED GPIO control (MT7530 only)
-+ * All registers follow this pattern:
-+ * [ 2: 0]  port 0
-+ * [ 6: 4]  port 1
-+ * [10: 8]  port 2
-+ * [14:12]  port 3
-+ * [18:16]  port 4
-+ */
-+
-+/* LED enable, 0: Disable, 1: Enable (Default) */
-+#define MT7530_LED_EN			0x7d00
-+/* LED mode, 0: GPIO mode, 1: PHY mode (Default) */
-+#define MT7530_LED_IO_MODE		0x7d04
-+/* GPIO direction, 0: Input, 1: Output */
-+#define MT7530_LED_GPIO_DIR		0x7d10
-+/* GPIO output enable, 0: Disable, 1: Enable */
-+#define MT7530_LED_GPIO_OE		0x7d14
-+/* GPIO value, 0: Low, 1: High */
-+#define MT7530_LED_GPIO_DATA		0x7d18
-+
- #define MT7530_CREV			0x7ffc
- #define  CHIP_NAME_SHIFT		16
- #define  MT7530_ID			0x7530
diff --git a/target/linux/generic/backport-5.10/731-v5.13-net-dsa-mt7530-Add-support-for-EEE-features.patch b/target/linux/generic/backport-5.10/731-v5.13-net-dsa-mt7530-Add-support-for-EEE-features.patch
deleted file mode 100644
index 2ba6c604a853..000000000000
--- a/target/linux/generic/backport-5.10/731-v5.13-net-dsa-mt7530-Add-support-for-EEE-features.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From 40b5d2f15c091fa9c854acde91ad2acb504027d7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
-Date: Mon, 12 Apr 2021 08:50:31 +0200
-Subject: [PATCH] net: dsa: mt7530: Add support for EEE features
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds EEE support.
-
-Signed-off-by: René van Dorst <opensource@vdorst.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 43 ++++++++++++++++++++++++++++++++++++++++
- drivers/net/dsa/mt7530.h | 14 ++++++++++++-
- 2 files changed, 56 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2371,6 +2371,17 @@ static void mt753x_phylink_mac_link_up(s
- 			mcr |= PMCR_RX_FC_EN;
- 	}
- 
-+	if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, 0) >= 0) {
-+		switch (speed) {
-+		case SPEED_1000:
-+			mcr |= PMCR_FORCE_EEE1G;
-+			break;
-+		case SPEED_100:
-+			mcr |= PMCR_FORCE_EEE100;
-+			break;
-+		}
-+	}
-+
- 	mt7530_set(priv, MT7530_PMCR_P(port), mcr);
- }
- 
-@@ -2599,6 +2610,36 @@ mt753x_phy_write(struct dsa_switch *ds,
- 	return priv->info->phy_write(ds, port, regnum, val);
- }
- 
-+static int mt753x_get_mac_eee(struct dsa_switch *ds, int port,
-+			      struct ethtool_eee *e)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+	u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
-+
-+	e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
-+	e->tx_lpi_timer = GET_LPI_THRESH(eeecr);
-+
-+	return 0;
-+}
-+
-+static int mt753x_set_mac_eee(struct dsa_switch *ds, int port,
-+			      struct ethtool_eee *e)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+	u32 set, mask = LPI_THRESH_MASK | LPI_MODE_EN;
-+
-+	if (e->tx_lpi_timer > 0xFFF)
-+		return -EINVAL;
-+
-+	set = SET_LPI_THRESH(e->tx_lpi_timer);
-+	if (!e->tx_lpi_enabled)
-+		/* Force LPI Mode without a delay */
-+		set |= LPI_MODE_EN;
-+	mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set);
-+
-+	return 0;
-+}
-+
- static const struct dsa_switch_ops mt7530_switch_ops = {
- 	.get_tag_protocol	= mtk_get_tag_protocol,
- 	.setup			= mt753x_setup,
-@@ -2627,6 +2668,8 @@ static const struct dsa_switch_ops mt753
- 	.phylink_mac_an_restart	= mt753x_phylink_mac_an_restart,
- 	.phylink_mac_link_down	= mt753x_phylink_mac_link_down,
- 	.phylink_mac_link_up	= mt753x_phylink_mac_link_up,
-+	.get_mac_eee		= mt753x_get_mac_eee,
-+	.set_mac_eee		= mt753x_set_mac_eee,
- };
- 
- static const struct mt753x_info mt753x_table[] = {
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -240,6 +240,8 @@ enum mt7530_vlan_port_attr {
- #define  PMCR_RX_EN			BIT(13)
- #define  PMCR_BACKOFF_EN		BIT(9)
- #define  PMCR_BACKPR_EN			BIT(8)
-+#define  PMCR_FORCE_EEE1G		BIT(7)
-+#define  PMCR_FORCE_EEE100		BIT(6)
- #define  PMCR_TX_FC_EN			BIT(5)
- #define  PMCR_RX_FC_EN			BIT(4)
- #define  PMCR_FORCE_SPEED_1000		BIT(3)
-@@ -264,7 +266,8 @@ enum mt7530_vlan_port_attr {
- #define  PMCR_LINK_SETTINGS_MASK	(PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
- 					 PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
- 					 PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
--					 PMCR_FORCE_FDX | PMCR_FORCE_LNK)
-+					 PMCR_FORCE_FDX | PMCR_FORCE_LNK | \
-+					 PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100)
- #define  PMCR_CPU_PORT_SETTING(id)	(PMCR_FORCE_MODE_ID((id)) | \
- 					 PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \
- 					 PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \
-@@ -273,6 +276,15 @@ enum mt7530_vlan_port_attr {
- 					 PMCR_FORCE_SPEED_1000 | \
- 					 PMCR_FORCE_FDX | PMCR_FORCE_LNK)
- 
-+#define MT7530_PMEEECR_P(x)		(0x3004 + (x) * 0x100)
-+#define  WAKEUP_TIME_1000(x)		(((x) & 0xFF) << 24)
-+#define  WAKEUP_TIME_100(x)		(((x) & 0xFF) << 16)
-+#define  LPI_THRESH_MASK		GENMASK(15, 4)
-+#define  LPI_THRESH_SHT			4
-+#define  SET_LPI_THRESH(x)		(((x) << LPI_THRESH_SHT) & LPI_THRESH_MASK)
-+#define  GET_LPI_THRESH(x)		(((x) & LPI_THRESH_MASK) >> LPI_THRESH_SHT)
-+#define  LPI_MODE_EN			BIT(0)
-+
- #define MT7530_PMSR_P(x)		(0x3008 + (x) * 0x100)
- #define  PMSR_EEE1G			BIT(7)
- #define  PMSR_EEE100M			BIT(6)
diff --git a/target/linux/generic/backport-5.10/732-v5.13-0003-of-base-Fix-some-formatting-issues-and-provide-missi.patch b/target/linux/generic/backport-5.10/732-v5.13-0003-of-base-Fix-some-formatting-issues-and-provide-missi.patch
deleted file mode 100644
index 33808f88a338..000000000000
--- a/target/linux/generic/backport-5.10/732-v5.13-0003-of-base-Fix-some-formatting-issues-and-provide-missi.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 3637d49e11219512920aca8b8ccd0994be33fa8b Mon Sep 17 00:00:00 2001
-From: Lee Jones <lee.jones@linaro.org>
-Date: Thu, 18 Mar 2021 10:40:30 +0000
-Subject: [PATCH] of: base: Fix some formatting issues and provide missing
- descriptions
-
-Fixes the following W=1 kernel build warning(s):
-
- drivers/of/base.c:315: warning: Function parameter or member 'cpun' not described in '__of_find_n_match_cpu_property'
- drivers/of/base.c:315: warning: Function parameter or member 'prop_name' not described in '__of_find_n_match_cpu_property'
- drivers/of/base.c:315: warning: Function parameter or member 'cpu' not described in '__of_find_n_match_cpu_property'
- drivers/of/base.c:315: warning: Function parameter or member 'thread' not described in '__of_find_n_match_cpu_property'
- drivers/of/base.c:315: warning: expecting prototype for property holds the physical id of the(). Prototype was for __of_find_n_match_cpu_property() instead
- drivers/of/base.c:1139: warning: Function parameter or member 'match' not described in 'of_find_matching_node_and_match'
- drivers/of/base.c:1779: warning: Function parameter or member 'np' not described in '__of_add_property'
- drivers/of/base.c:1779: warning: Function parameter or member 'prop' not described in '__of_add_property'
- drivers/of/base.c:1800: warning: Function parameter or member 'np' not described in 'of_add_property'
- drivers/of/base.c:1800: warning: Function parameter or member 'prop' not described in 'of_add_property'
- drivers/of/base.c:1849: warning: Function parameter or member 'np' not described in 'of_remove_property'
- drivers/of/base.c:1849: warning: Function parameter or member 'prop' not described in 'of_remove_property'
- drivers/of/base.c:2137: warning: Function parameter or member 'dn' not described in 'of_console_check'
- drivers/of/base.c:2137: warning: Function parameter or member 'name' not described in 'of_console_check'
- drivers/of/base.c:2137: warning: Function parameter or member 'index' not described in 'of_console_check'
-
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: Frank Rowand <frowand.list@gmail.com>
-Cc: "David S. Miller" <davem@davemloft.net>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Signed-off-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20210318104036.3175910-5-lee.jones@linaro.org
----
- drivers/of/base.c | 16 +++++++++++-----
- 1 file changed, 11 insertions(+), 5 deletions(-)
-
---- a/drivers/of/base.c
-+++ b/drivers/of/base.c
-@@ -305,7 +305,7 @@ bool __weak arch_match_cpu_phys_id(int c
- 	return (u32)phys_id == cpu;
- }
- 
--/**
-+/*
-  * Checks if the given "prop_name" property holds the physical id of the
-  * core/thread corresponding to the logical cpu 'cpu'. If 'thread' is not
-  * NULL, local thread number within the core is returned in it.
-@@ -1128,7 +1128,7 @@ EXPORT_SYMBOL(of_match_node);
-  *			will; typically, you pass what the previous call
-  *			returned. of_node_put() will be called on it
-  *	@matches:	array of of device match structures to search in
-- *	@match		Updated to point at the matches entry which matched
-+ *	@match:		Updated to point at the matches entry which matched
-  *
-  *	Returns a node pointer with refcount incremented, use
-  *	of_node_put() on it when done.
-@@ -1779,6 +1779,8 @@ EXPORT_SYMBOL(of_count_phandle_with_args
- 
- /**
-  * __of_add_property - Add a property to a node without lock operations
-+ * @np:		Caller's Device Node
-+ * @prob:	Property to add
-  */
- int __of_add_property(struct device_node *np, struct property *prop)
- {
-@@ -1800,6 +1802,8 @@ int __of_add_property(struct device_node
- 
- /**
-  * of_add_property - Add a property to a node
-+ * @np:		Caller's Device Node
-+ * @prob:	Property to add
-  */
- int of_add_property(struct device_node *np, struct property *prop)
- {
-@@ -1844,6 +1848,8 @@ int __of_remove_property(struct device_n
- 
- /**
-  * of_remove_property - Remove a property from a node.
-+ * @np:		Caller's Device Node
-+ * @prob:	Property to remove
-  *
-  * Note that we don't actually remove it, since we have given out
-  * who-knows-how-many pointers to the data using get-property.
-@@ -2130,9 +2136,9 @@ EXPORT_SYMBOL_GPL(of_alias_get_highest_i
- 
- /**
-  * of_console_check() - Test and setup console for DT setup
-- * @dn - Pointer to device node
-- * @name - Name to use for preferred console without index. ex. "ttyS"
-- * @index - Index to use for preferred console.
-+ * @dn: Pointer to device node
-+ * @name: Name to use for preferred console without index. ex. "ttyS"
-+ * @index: Index to use for preferred console.
-  *
-  * Check if the given device node matches the stdout-path property in the
-  * /chosen node. If it does then register it as the preferred console and return
diff --git a/target/linux/generic/backport-5.10/732-v5.13-0005-of-Fix-kerneldoc-output-formatting.patch b/target/linux/generic/backport-5.10/732-v5.13-0005-of-Fix-kerneldoc-output-formatting.patch
deleted file mode 100644
index bda03b9c4c59..000000000000
--- a/target/linux/generic/backport-5.10/732-v5.13-0005-of-Fix-kerneldoc-output-formatting.patch
+++ /dev/null
@@ -1,489 +0,0 @@
-From 62f026f082e4d762a47b43ea693b38f025122332 Mon Sep 17 00:00:00 2001
-From: Rob Herring <robh@kernel.org>
-Date: Fri, 26 Mar 2021 13:26:06 -0600
-Subject: [PATCH] of: Fix kerneldoc output formatting
-
-The indentation of the kerneldoc comments affects the output formatting.
-Leading tabs in particular don't work, sections need to be indented
-under the section header, and several code blocks are reformatted.
-
-Cc: Frank Rowand <frowand.list@gmail.com>
-Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
-Signed-off-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-Link: https://lore.kernel.org/r/20210326192606.3702739-1-robh@kernel.org
----
- drivers/of/base.c | 275 +++++++++++++++++++++++-----------------------
- drivers/of/fdt.c  |   9 +-
- 2 files changed, 141 insertions(+), 143 deletions(-)
-
---- a/drivers/of/base.c
-+++ b/drivers/of/base.c
-@@ -651,11 +651,11 @@ bool of_device_is_big_endian(const struc
- EXPORT_SYMBOL(of_device_is_big_endian);
- 
- /**
-- *	of_get_parent - Get a node's parent if any
-- *	@node:	Node to get parent
-+ * of_get_parent - Get a node's parent if any
-+ * @node:	Node to get parent
-  *
-- *	Returns a node pointer with refcount incremented, use
-- *	of_node_put() on it when done.
-+ * Return: A node pointer with refcount incremented, use
-+ * of_node_put() on it when done.
-  */
- struct device_node *of_get_parent(const struct device_node *node)
- {
-@@ -673,15 +673,15 @@ struct device_node *of_get_parent(const
- EXPORT_SYMBOL(of_get_parent);
- 
- /**
-- *	of_get_next_parent - Iterate to a node's parent
-- *	@node:	Node to get parent of
-+ * of_get_next_parent - Iterate to a node's parent
-+ * @node:	Node to get parent of
-  *
-- *	This is like of_get_parent() except that it drops the
-- *	refcount on the passed node, making it suitable for iterating
-- *	through a node's parents.
-+ * This is like of_get_parent() except that it drops the
-+ * refcount on the passed node, making it suitable for iterating
-+ * through a node's parents.
-  *
-- *	Returns a node pointer with refcount incremented, use
-- *	of_node_put() on it when done.
-+ * Return: A node pointer with refcount incremented, use
-+ * of_node_put() on it when done.
-  */
- struct device_node *of_get_next_parent(struct device_node *node)
- {
-@@ -719,13 +719,13 @@ static struct device_node *__of_get_next
- 	     child = __of_get_next_child(parent, child))
- 
- /**
-- *	of_get_next_child - Iterate a node childs
-- *	@node:	parent node
-- *	@prev:	previous child of the parent node, or NULL to get first
-- *
-- *	Returns a node pointer with refcount incremented, use of_node_put() on
-- *	it when done. Returns NULL when prev is the last child. Decrements the
-- *	refcount of prev.
-+ * of_get_next_child - Iterate a node childs
-+ * @node:	parent node
-+ * @prev:	previous child of the parent node, or NULL to get first
-+ *
-+ * Return: A node pointer with refcount incremented, use of_node_put() on
-+ * it when done. Returns NULL when prev is the last child. Decrements the
-+ * refcount of prev.
-  */
- struct device_node *of_get_next_child(const struct device_node *node,
- 	struct device_node *prev)
-@@ -741,12 +741,12 @@ struct device_node *of_get_next_child(co
- EXPORT_SYMBOL(of_get_next_child);
- 
- /**
-- *	of_get_next_available_child - Find the next available child node
-- *	@node:	parent node
-- *	@prev:	previous child of the parent node, or NULL to get first
-+ * of_get_next_available_child - Find the next available child node
-+ * @node:	parent node
-+ * @prev:	previous child of the parent node, or NULL to get first
-  *
-- *      This function is like of_get_next_child(), except that it
-- *      automatically skips any disabled nodes (i.e. status = "disabled").
-+ * This function is like of_get_next_child(), except that it
-+ * automatically skips any disabled nodes (i.e. status = "disabled").
-  */
- struct device_node *of_get_next_available_child(const struct device_node *node,
- 	struct device_node *prev)
-@@ -772,12 +772,12 @@ struct device_node *of_get_next_availabl
- EXPORT_SYMBOL(of_get_next_available_child);
- 
- /**
-- *	of_get_next_cpu_node - Iterate on cpu nodes
-- *	@prev:	previous child of the /cpus node, or NULL to get first
-+ * of_get_next_cpu_node - Iterate on cpu nodes
-+ * @prev:	previous child of the /cpus node, or NULL to get first
-  *
-- *	Returns a cpu node pointer with refcount incremented, use of_node_put()
-- *	on it when done. Returns NULL when prev is the last child. Decrements
-- *	the refcount of prev.
-+ * Return: A cpu node pointer with refcount incremented, use of_node_put()
-+ * on it when done. Returns NULL when prev is the last child. Decrements
-+ * the refcount of prev.
-  */
- struct device_node *of_get_next_cpu_node(struct device_node *prev)
- {
-@@ -834,15 +834,15 @@ struct device_node *of_get_compatible_ch
- EXPORT_SYMBOL(of_get_compatible_child);
- 
- /**
-- *	of_get_child_by_name - Find the child node by name for a given parent
-- *	@node:	parent node
-- *	@name:	child name to look for.
-- *
-- *      This function looks for child node for given matching name
-- *
-- *	Returns a node pointer if found, with refcount incremented, use
-- *	of_node_put() on it when done.
-- *	Returns NULL if node is not found.
-+ * of_get_child_by_name - Find the child node by name for a given parent
-+ * @node:	parent node
-+ * @name:	child name to look for.
-+ *
-+ * This function looks for child node for given matching name
-+ *
-+ * Return: A node pointer if found, with refcount incremented, use
-+ * of_node_put() on it when done.
-+ * Returns NULL if node is not found.
-  */
- struct device_node *of_get_child_by_name(const struct device_node *node,
- 				const char *name)
-@@ -893,22 +893,22 @@ struct device_node *__of_find_node_by_fu
- }
- 
- /**
-- *	of_find_node_opts_by_path - Find a node matching a full OF path
-- *	@path: Either the full path to match, or if the path does not
-- *	       start with '/', the name of a property of the /aliases
-- *	       node (an alias).  In the case of an alias, the node
-- *	       matching the alias' value will be returned.
-- *	@opts: Address of a pointer into which to store the start of
-- *	       an options string appended to the end of the path with
-- *	       a ':' separator.
-- *
-- *	Valid paths:
-- *		/foo/bar	Full path
-- *		foo		Valid alias
-- *		foo/bar		Valid alias + relative path
-+ * of_find_node_opts_by_path - Find a node matching a full OF path
-+ * @path: Either the full path to match, or if the path does not
-+ *       start with '/', the name of a property of the /aliases
-+ *       node (an alias).  In the case of an alias, the node
-+ *       matching the alias' value will be returned.
-+ * @opts: Address of a pointer into which to store the start of
-+ *       an options string appended to the end of the path with
-+ *       a ':' separator.
-+ *
-+ * Valid paths:
-+ *  * /foo/bar	Full path
-+ *  * foo	Valid alias
-+ *  * foo/bar	Valid alias + relative path
-  *
-- *	Returns a node pointer with refcount incremented, use
-- *	of_node_put() on it when done.
-+ * Return: A node pointer with refcount incremented, use
-+ * of_node_put() on it when done.
-  */
- struct device_node *of_find_node_opts_by_path(const char *path, const char **opts)
- {
-@@ -958,15 +958,15 @@ struct device_node *of_find_node_opts_by
- EXPORT_SYMBOL(of_find_node_opts_by_path);
- 
- /**
-- *	of_find_node_by_name - Find a node by its "name" property
-- *	@from:	The node to start searching from or NULL; the node
-+ * of_find_node_by_name - Find a node by its "name" property
-+ * @from:	The node to start searching from or NULL; the node
-  *		you pass will not be searched, only the next one
-  *		will. Typically, you pass what the previous call
-  *		returned. of_node_put() will be called on @from.
-- *	@name:	The name string to match against
-+ * @name:	The name string to match against
-  *
-- *	Returns a node pointer with refcount incremented, use
-- *	of_node_put() on it when done.
-+ * Return: A node pointer with refcount incremented, use
-+ * of_node_put() on it when done.
-  */
- struct device_node *of_find_node_by_name(struct device_node *from,
- 	const char *name)
-@@ -985,16 +985,16 @@ struct device_node *of_find_node_by_name
- EXPORT_SYMBOL(of_find_node_by_name);
- 
- /**
-- *	of_find_node_by_type - Find a node by its "device_type" property
-- *	@from:	The node to start searching from, or NULL to start searching
-+ * of_find_node_by_type - Find a node by its "device_type" property
-+ * @from:	The node to start searching from, or NULL to start searching
-  *		the entire device tree. The node you pass will not be
-  *		searched, only the next one will; typically, you pass
-  *		what the previous call returned. of_node_put() will be
-  *		called on from for you.
-- *	@type:	The type string to match against
-+ * @type:	The type string to match against
-  *
-- *	Returns a node pointer with refcount incremented, use
-- *	of_node_put() on it when done.
-+ * Return: A node pointer with refcount incremented, use
-+ * of_node_put() on it when done.
-  */
- struct device_node *of_find_node_by_type(struct device_node *from,
- 	const char *type)
-@@ -1013,18 +1013,18 @@ struct device_node *of_find_node_by_type
- EXPORT_SYMBOL(of_find_node_by_type);
- 
- /**
-- *	of_find_compatible_node - Find a node based on type and one of the
-+ * of_find_compatible_node - Find a node based on type and one of the
-  *                                tokens in its "compatible" property
-- *	@from:		The node to start searching from or NULL, the node
-- *			you pass will not be searched, only the next one
-- *			will; typically, you pass what the previous call
-- *			returned. of_node_put() will be called on it
-- *	@type:		The type string to match "device_type" or NULL to ignore
-- *	@compatible:	The string to match to one of the tokens in the device
-- *			"compatible" list.
-+ * @from:	The node to start searching from or NULL, the node
-+ *		you pass will not be searched, only the next one
-+ *		will; typically, you pass what the previous call
-+ *		returned. of_node_put() will be called on it
-+ * @type:	The type string to match "device_type" or NULL to ignore
-+ * @compatible:	The string to match to one of the tokens in the device
-+ *		"compatible" list.
-  *
-- *	Returns a node pointer with refcount incremented, use
-- *	of_node_put() on it when done.
-+ * Return: A node pointer with refcount incremented, use
-+ * of_node_put() on it when done.
-  */
- struct device_node *of_find_compatible_node(struct device_node *from,
- 	const char *type, const char *compatible)
-@@ -1044,16 +1044,16 @@ struct device_node *of_find_compatible_n
- EXPORT_SYMBOL(of_find_compatible_node);
- 
- /**
-- *	of_find_node_with_property - Find a node which has a property with
-- *                                   the given name.
-- *	@from:		The node to start searching from or NULL, the node
-- *			you pass will not be searched, only the next one
-- *			will; typically, you pass what the previous call
-- *			returned. of_node_put() will be called on it
-- *	@prop_name:	The name of the property to look for.
-+ * of_find_node_with_property - Find a node which has a property with
-+ *                              the given name.
-+ * @from:	The node to start searching from or NULL, the node
-+ *		you pass will not be searched, only the next one
-+ *		will; typically, you pass what the previous call
-+ *		returned. of_node_put() will be called on it
-+ * @prop_name:	The name of the property to look for.
-  *
-- *	Returns a node pointer with refcount incremented, use
-- *	of_node_put() on it when done.
-+ * Return: A node pointer with refcount incremented, use
-+ * of_node_put() on it when done.
-  */
- struct device_node *of_find_node_with_property(struct device_node *from,
- 	const char *prop_name)
-@@ -1102,10 +1102,10 @@ const struct of_device_id *__of_match_no
- 
- /**
-  * of_match_node - Tell if a device_node has a matching of_match structure
-- *	@matches:	array of of device match structures to search in
-- *	@node:		the of device structure to match against
-+ * @matches:	array of of device match structures to search in
-+ * @node:	the of device structure to match against
-  *
-- *	Low level utility function used by device matching.
-+ * Low level utility function used by device matching.
-  */
- const struct of_device_id *of_match_node(const struct of_device_id *matches,
- 					 const struct device_node *node)
-@@ -1121,17 +1121,17 @@ const struct of_device_id *of_match_node
- EXPORT_SYMBOL(of_match_node);
- 
- /**
-- *	of_find_matching_node_and_match - Find a node based on an of_device_id
-- *					  match table.
-- *	@from:		The node to start searching from or NULL, the node
-- *			you pass will not be searched, only the next one
-- *			will; typically, you pass what the previous call
-- *			returned. of_node_put() will be called on it
-- *	@matches:	array of of device match structures to search in
-- *	@match:		Updated to point at the matches entry which matched
-+ * of_find_matching_node_and_match - Find a node based on an of_device_id
-+ *				     match table.
-+ * @from:	The node to start searching from or NULL, the node
-+ *		you pass will not be searched, only the next one
-+ *		will; typically, you pass what the previous call
-+ *		returned. of_node_put() will be called on it
-+ * @matches:	array of of device match structures to search in
-+ * @match:	Updated to point at the matches entry which matched
-  *
-- *	Returns a node pointer with refcount incremented, use
-- *	of_node_put() on it when done.
-+ * Return: A node pointer with refcount incremented, use
-+ * of_node_put() on it when done.
-  */
- struct device_node *of_find_matching_node_and_match(struct device_node *from,
- 					const struct of_device_id *matches,
-@@ -1465,21 +1465,21 @@ EXPORT_SYMBOL(of_parse_phandle);
-  * Caller is responsible to call of_node_put() on the returned out_args->np
-  * pointer.
-  *
-- * Example:
-+ * Example::
-  *
-- * phandle1: node1 {
-+ *  phandle1: node1 {
-  *	#list-cells = <2>;
-- * }
-+ *  };
-  *
-- * phandle2: node2 {
-+ *  phandle2: node2 {
-  *	#list-cells = <1>;
-- * }
-+ *  };
-  *
-- * node3 {
-+ *  node3 {
-  *	list = <&phandle1 1 2 &phandle2 3>;
-- * }
-+ *  };
-  *
-- * To get a device_node of the `node2' node you may call this:
-+ * To get a device_node of the ``node2`` node you may call this:
-  * of_parse_phandle_with_args(node3, "list", "#list-cells", 1, &args);
-  */
- int of_parse_phandle_with_args(const struct device_node *np, const char *list_name,
-@@ -1517,29 +1517,29 @@ EXPORT_SYMBOL(of_parse_phandle_with_args
-  * Caller is responsible to call of_node_put() on the returned out_args->np
-  * pointer.
-  *
-- * Example:
-- *
-- * phandle1: node1 {
-- *	#list-cells = <2>;
-- * }
-- *
-- * phandle2: node2 {
-- *	#list-cells = <1>;
-- * }
-+ * Example::
-  *
-- * phandle3: node3 {
-- * 	#list-cells = <1>;
-- * 	list-map = <0 &phandle2 3>,
-- * 		   <1 &phandle2 2>,
-- * 		   <2 &phandle1 5 1>;
-- *	list-map-mask = <0x3>;
-- * };
-- *
-- * node4 {
-- *	list = <&phandle1 1 2 &phandle3 0>;
-- * }
-+ *  phandle1: node1 {
-+ *  	#list-cells = <2>;
-+ *  };
-+ *
-+ *  phandle2: node2 {
-+ *  	#list-cells = <1>;
-+ *  };
-+ *
-+ *  phandle3: node3 {
-+ *  	#list-cells = <1>;
-+ *  	list-map = <0 &phandle2 3>,
-+ *  		   <1 &phandle2 2>,
-+ *  		   <2 &phandle1 5 1>;
-+ *  	list-map-mask = <0x3>;
-+ *  };
-+ *
-+ *  node4 {
-+ *  	list = <&phandle1 1 2 &phandle3 0>;
-+ *  };
-  *
-- * To get a device_node of the `node2' node you may call this:
-+ * To get a device_node of the ``node2`` node you may call this:
-  * of_parse_phandle_with_args(node4, "list", "list", 1, &args);
-  */
- int of_parse_phandle_with_args_map(const struct device_node *np,
-@@ -1699,19 +1699,19 @@ EXPORT_SYMBOL(of_parse_phandle_with_args
-  * Caller is responsible to call of_node_put() on the returned out_args->np
-  * pointer.
-  *
-- * Example:
-+ * Example::
-  *
-- * phandle1: node1 {
-- * }
-+ *  phandle1: node1 {
-+ *  };
-  *
-- * phandle2: node2 {
-- * }
-+ *  phandle2: node2 {
-+ *  };
-  *
-- * node3 {
-- *	list = <&phandle1 0 2 &phandle2 2 3>;
-- * }
-+ *  node3 {
-+ *  	list = <&phandle1 0 2 &phandle2 2 3>;
-+ *  };
-  *
-- * To get a device_node of the `node2' node you may call this:
-+ * To get a device_node of the ``node2`` node you may call this:
-  * of_parse_phandle_with_fixed_args(node3, "list", 2, 1, &args);
-  */
- int of_parse_phandle_with_fixed_args(const struct device_node *np,
-@@ -1957,13 +1957,12 @@ static void of_alias_add(struct alias_pr
- 
- /**
-  * of_alias_scan - Scan all properties of the 'aliases' node
-+ * @dt_alloc:	An allocator that provides a virtual address to memory
-+ *		for storing the resulting tree
-  *
-  * The function scans all the properties of the 'aliases' node and populates
-  * the global lookup table with the properties.  It returns the
-  * number of alias properties found, or an error code in case of failure.
-- *
-- * @dt_alloc:	An allocator that provides a virtual address to memory
-- *		for storing the resulting tree
-  */
- void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align))
- {
-@@ -2158,12 +2157,12 @@ bool of_console_check(struct device_node
- EXPORT_SYMBOL_GPL(of_console_check);
- 
- /**
-- *	of_find_next_cache_node - Find a node's subsidiary cache
-- *	@np:	node of type "cpu" or "cache"
-+ * of_find_next_cache_node - Find a node's subsidiary cache
-+ * @np:	node of type "cpu" or "cache"
-  *
-- *	Returns a node pointer with refcount incremented, use
-- *	of_node_put() on it when done.  Caller should hold a reference
-- *	to np.
-+ * Return: A node pointer with refcount incremented, use
-+ * of_node_put() on it when done.  Caller should hold a reference
-+ * to np.
-  */
- struct device_node *of_find_next_cache_node(const struct device_node *np)
- {
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -349,11 +349,6 @@ static int unflatten_dt_nodes(const void
- 
- /**
-  * __unflatten_device_tree - create tree of device_nodes from flat blob
-- *
-- * unflattens a device-tree, creating the
-- * tree of struct device_node. It also fills the "name" and "type"
-- * pointers of the nodes so the normal device-tree walking functions
-- * can be used.
-  * @blob: The blob to expand
-  * @dad: Parent device node
-  * @mynodes: The device_node tree created by the call
-@@ -361,6 +356,10 @@ static int unflatten_dt_nodes(const void
-  * for the resulting tree
-  * @detached: if true set OF_DETACHED on @mynodes
-  *
-+ * unflattens a device-tree, creating the tree of struct device_node. It also
-+ * fills the "name" and "type" pointers of the nodes so the normal device-tree
-+ * walking functions can be used.
-+ *
-  * Returns NULL on failure or the memory chunk containing the unflattened
-  * device tree on success.
-  */
diff --git a/target/linux/generic/backport-5.10/732-v5.13-0006-of-Add-missing-Return-section-in-kerneldoc-comments.patch b/target/linux/generic/backport-5.10/732-v5.13-0006-of-Add-missing-Return-section-in-kerneldoc-comments.patch
deleted file mode 100644
index 9c99ccb1dbb6..000000000000
--- a/target/linux/generic/backport-5.10/732-v5.13-0006-of-Add-missing-Return-section-in-kerneldoc-comments.patch
+++ /dev/null
@@ -1,787 +0,0 @@
-From 8c8239c2c1fb82f171cb22a707f3bb88a2f22109 Mon Sep 17 00:00:00 2001
-From: Rob Herring <robh@kernel.org>
-Date: Thu, 25 Mar 2021 10:47:12 -0600
-Subject: [PATCH] of: Add missing 'Return' section in kerneldoc comments
-
-Many of the DT kerneldoc comments are lacking a 'Return' section. Let's
-add the section in cases we have a description of return values. There's
-still some cases where the return values are not documented.
-
-Cc: Frank Rowand <frowand.list@gmail.com>
-Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
-Signed-off-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-Link: https://lore.kernel.org/r/20210325164713.1296407-8-robh@kernel.org
----
- drivers/of/base.c     | 39 +++++++++++++------------
- drivers/of/dynamic.c  | 19 ++++++++-----
- drivers/of/fdt.c      |  8 +++---
- drivers/of/irq.c      | 14 ++++-----
- drivers/of/overlay.c  | 16 +++++------
- drivers/of/platform.c | 10 +++----
- drivers/of/property.c | 66 +++++++++++++++++++++++++++----------------
- include/linux/of.h    | 63 ++++++++++++++++++++++++++---------------
- 8 files changed, 140 insertions(+), 95 deletions(-)
-
---- a/drivers/of/base.c
-+++ b/drivers/of/base.c
-@@ -244,7 +244,7 @@ struct device_node *__of_find_all_nodes(
-  * @prev:	Previous node or NULL to start iteration
-  *		of_node_put() will be called on it
-  *
-- * Returns a node pointer with refcount incremented, use
-+ * Return: A node pointer with refcount incremented, use
-  * of_node_put() on it when done.
-  */
- struct device_node *of_find_all_nodes(struct device_node *prev)
-@@ -374,7 +374,7 @@ bool __weak arch_find_n_match_cpu_physic
-  * before booting secondary cores. This function uses arch_match_cpu_phys_id
-  * which can be overridden by architecture specific implementation.
-  *
-- * Returns a node pointer for the logical cpu with refcount incremented, use
-+ * Return: A node pointer for the logical cpu with refcount incremented, use
-  * of_node_put() on it when done. Returns NULL if not found.
-  */
- struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
-@@ -394,8 +394,8 @@ EXPORT_SYMBOL(of_get_cpu_node);
-  *
-  * @cpu_node: Pointer to the device_node for CPU.
-  *
-- * Returns the logical CPU number of the given CPU device_node.
-- * Returns -ENODEV if the CPU is not found.
-+ * Return: The logical CPU number of the given CPU device_node or -ENODEV if the
-+ * CPU is not found.
-  */
- int of_cpu_node_to_id(struct device_node *cpu_node)
- {
-@@ -427,7 +427,7 @@ EXPORT_SYMBOL(of_cpu_node_to_id);
-  * bindings. This function check for both and returns the idle state node for
-  * the requested index.
-  *
-- * In case an idle state node is found at @index, the refcount is incremented
-+ * Return: An idle state node if found at @index. The refcount is incremented
-  * for it, so call of_node_put() on it when done. Returns NULL if not found.
-  */
- struct device_node *of_get_cpu_state_node(struct device_node *cpu_node,
-@@ -561,7 +561,7 @@ int of_device_compatible_match(struct de
-  * of_machine_is_compatible - Test root of device tree for a given compatible value
-  * @compat: compatible string to look for in root node's compatible property.
-  *
-- * Returns a positive integer if the root node has the given value in its
-+ * Return: A positive integer if the root node has the given value in its
-  * compatible property.
-  */
- int of_machine_is_compatible(const char *compat)
-@@ -583,7 +583,7 @@ EXPORT_SYMBOL(of_machine_is_compatible);
-  *
-  *  @device: Node to check for availability, with locks already held
-  *
-- *  Returns true if the status property is absent or set to "okay" or "ok",
-+ *  Return: True if the status property is absent or set to "okay" or "ok",
-  *  false otherwise
-  */
- static bool __of_device_is_available(const struct device_node *device)
-@@ -611,7 +611,7 @@ static bool __of_device_is_available(con
-  *
-  *  @device: Node to check for availability
-  *
-- *  Returns true if the status property is absent or set to "okay" or "ok",
-+ *  Return: True if the status property is absent or set to "okay" or "ok",
-  *  false otherwise
-  */
- bool of_device_is_available(const struct device_node *device)
-@@ -632,7 +632,7 @@ EXPORT_SYMBOL(of_device_is_available);
-  *
-  *  @device: Node to check for endianness
-  *
-- *  Returns true if the device has a "big-endian" property, or if the kernel
-+ *  Return: True if the device has a "big-endian" property, or if the kernel
-  *  was compiled for BE *and* the device has a "native-endian" property.
-  *  Returns false otherwise.
-  *
-@@ -816,7 +816,7 @@ EXPORT_SYMBOL(of_get_next_cpu_node);
-  * Lookup child node whose compatible property contains the given compatible
-  * string.
-  *
-- * Returns a node pointer with refcount incremented, use of_node_put() on it
-+ * Return: a node pointer with refcount incremented, use of_node_put() on it
-  * when done; or NULL if not found.
-  */
- struct device_node *of_get_compatible_child(const struct device_node *parent,
-@@ -1170,7 +1170,7 @@ EXPORT_SYMBOL(of_find_matching_node_and_
-  * It does this by stripping the manufacturer prefix (as delimited by a ',')
-  * from the first entry in the compatible list property.
-  *
-- * This routine returns 0 on success, <0 on failure.
-+ * Return: This routine returns 0 on success, <0 on failure.
-  */
- int of_modalias_node(struct device_node *node, char *modalias, int len)
- {
-@@ -1190,7 +1190,7 @@ EXPORT_SYMBOL_GPL(of_modalias_node);
-  * of_find_node_by_phandle - Find a node given a phandle
-  * @handle:	phandle of the node to find
-  *
-- * Returns a node pointer with refcount incremented, use
-+ * Return: A node pointer with refcount incremented, use
-  * of_node_put() on it when done.
-  */
- struct device_node *of_find_node_by_phandle(phandle handle)
-@@ -1431,7 +1431,7 @@ static int __of_parse_phandle_with_args(
-  * @index: For properties holding a table of phandles, this is the index into
-  *         the table
-  *
-- * Returns the device_node pointer with refcount incremented.  Use
-+ * Return: The device_node pointer with refcount incremented.  Use
-  * of_node_put() on it when done.
-  */
- struct device_node *of_parse_phandle(const struct device_node *np,
-@@ -1731,7 +1731,7 @@ EXPORT_SYMBOL(of_parse_phandle_with_fixe
-  * @list_name:	property name that contains a list
-  * @cells_name:	property name that specifies phandles' arguments count
-  *
-- * Returns the number of phandle + argument tuples within a property. It
-+ * Return: The number of phandle + argument tuples within a property. It
-  * is a typical pattern to encode a list of phandle and variable
-  * arguments into a single property. The number of arguments is encoded
-  * by a property in the phandle-target node. For example, a gpios
-@@ -2031,7 +2031,9 @@ void of_alias_scan(void * (*dt_alloc)(u6
-  * @stem:	Alias stem of the given device_node
-  *
-  * The function travels the lookup table to get the alias id for the given
-- * device_node and alias stem.  It returns the alias id if found.
-+ * device_node and alias stem.
-+ *
-+ * Return: The alias id if found.
-  */
- int of_alias_get_id(struct device_node *np, const char *stem)
- {
-@@ -2140,8 +2142,9 @@ EXPORT_SYMBOL_GPL(of_alias_get_highest_i
-  * @index: Index to use for preferred console.
-  *
-  * Check if the given device node matches the stdout-path property in the
-- * /chosen node. If it does then register it as the preferred console and return
-- * TRUE. Otherwise return FALSE.
-+ * /chosen node. If it does then register it as the preferred console.
-+ *
-+ * Return: TRUE if console successfully setup. Otherwise return FALSE.
-  */
- bool of_console_check(struct device_node *dn, char *name, int index)
- {
-@@ -2192,7 +2195,7 @@ struct device_node *of_find_next_cache_n
-  *
-  * @cpu: cpu number(logical index) for which the last cache level is needed
-  *
-- * Returns the the level at which the last cache is present. It is exactly
-+ * Return: The the level at which the last cache is present. It is exactly
-  * same as  the total number of cache levels for the given logical cpu.
-  */
- int of_find_last_cache_level(unsigned int cpu)
---- a/drivers/of/dynamic.c
-+++ b/drivers/of/dynamic.c
-@@ -27,7 +27,7 @@ static struct device_node *kobj_to_devic
-  * @node:	Node to inc refcount, NULL is supported to simplify writing of
-  *		callers
-  *
-- * Returns node.
-+ * Return: The node with refcount incremented.
-  */
- struct device_node *of_node_get(struct device_node *node)
- {
-@@ -104,7 +104,8 @@ int of_reconfig_notify(unsigned long act
-  * @arg		- argument of the of notifier
-  *
-  * Returns the new state of a device based on the notifier used.
-- * Returns 0 on device going from enabled to disabled, 1 on device
-+ *
-+ * Return: 0 on device going from enabled to disabled, 1 on device
-  * going from disabled to enabled and -1 on no change.
-  */
- int of_reconfig_get_state_change(unsigned long action, struct of_reconfig_data *pr)
-@@ -371,7 +372,8 @@ void of_node_release(struct kobject *kob
-  * property structure and the property name & contents. The property's
-  * flags have the OF_DYNAMIC bit set so that we can differentiate between
-  * dynamically allocated properties and not.
-- * Returns the newly allocated property or NULL on out of memory error.
-+ *
-+ * Return: The newly allocated property or NULL on out of memory error.
-  */
- struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags)
- {
-@@ -414,7 +416,7 @@ struct property *__of_prop_dup(const str
-  * another node.  The node data are dynamically allocated and all the node
-  * flags have the OF_DYNAMIC & OF_DETACHED bits set.
-  *
-- * Returns the newly allocated node or NULL on out of memory error.
-+ * Return: The newly allocated node or NULL on out of memory error.
-  */
- struct device_node *__of_node_dup(const struct device_node *np,
- 				  const char *full_name)
-@@ -780,7 +782,8 @@ static int __of_changeset_apply(struct o
-  * Any side-effects of live tree state changes are applied here on
-  * success, like creation/destruction of devices and side-effects
-  * like creation of sysfs properties and directories.
-- * Returns 0 on success, a negative error value in case of an error.
-+ *
-+ * Return: 0 on success, a negative error value in case of an error.
-  * On error the partially applied effects are reverted.
-  */
- int of_changeset_apply(struct of_changeset *ocs)
-@@ -874,7 +877,8 @@ static int __of_changeset_revert(struct
-  * was before the application.
-  * Any side-effects like creation/destruction of devices and
-  * removal of sysfs properties and directories are applied.
-- * Returns 0 on success, a negative error value in case of an error.
-+ *
-+ * Return: 0 on success, a negative error value in case of an error.
-  */
- int of_changeset_revert(struct of_changeset *ocs)
- {
-@@ -902,7 +906,8 @@ EXPORT_SYMBOL_GPL(of_changeset_revert);
-  * + OF_RECONFIG_ADD_PROPERTY
-  * + OF_RECONFIG_REMOVE_PROPERTY,
-  * + OF_RECONFIG_UPDATE_PROPERTY
-- * Returns 0 on success, a negative error value in case of an error.
-+ *
-+ * Return: 0 on success, a negative error value in case of an error.
-  */
- int of_changeset_action(struct of_changeset *ocs, unsigned long action,
- 		struct device_node *np, struct property *prop)
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -282,7 +282,7 @@ static void reverse_nodes(struct device_
-  * @dad: Parent struct device_node
-  * @nodepp: The device_node tree created by the call
-  *
-- * It returns the size of unflattened device tree or error code
-+ * Return: The size of unflattened device tree or error code
-  */
- static int unflatten_dt_nodes(const void *blob,
- 			      void *mem,
-@@ -360,7 +360,7 @@ static int unflatten_dt_nodes(const void
-  * fills the "name" and "type" pointers of the nodes so the normal device-tree
-  * walking functions can be used.
-  *
-- * Returns NULL on failure or the memory chunk containing the unflattened
-+ * Return: NULL on failure or the memory chunk containing the unflattened
-  * device tree on success.
-  */
- void *__unflatten_device_tree(const void *blob,
-@@ -441,7 +441,7 @@ static DEFINE_MUTEX(of_fdt_unflatten_mut
-  * pointers of the nodes so the normal device-tree walking functions
-  * can be used.
-  *
-- * Returns NULL on failure or the memory chunk containing the unflattened
-+ * Return: NULL on failure or the memory chunk containing the unflattened
-  * device tree on success.
-  */
- void *of_fdt_unflatten_tree(const unsigned long *blob,
-@@ -715,7 +715,7 @@ const void *__init of_get_flat_dt_prop(u
-  * @node: node to test
-  * @compat: compatible string to compare with compatible list.
-  *
-- * On match, returns a non-zero value with smaller values returned for more
-+ * Return: a non-zero value on match with smaller values returned for more
-  * specific compatible values.
-  */
- static int of_fdt_is_compatible(const void *blob,
---- a/drivers/of/irq.c
-+++ b/drivers/of/irq.c
-@@ -48,7 +48,7 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
-  * of_irq_find_parent - Given a device node, find its interrupt parent node
-  * @child: pointer to device node
-  *
-- * Returns a pointer to the interrupt parent node, or NULL if the interrupt
-+ * Return: A pointer to the interrupt parent node, or NULL if the interrupt
-  * parent could not be determined.
-  */
- struct device_node *of_irq_find_parent(struct device_node *child)
-@@ -81,14 +81,14 @@ EXPORT_SYMBOL_GPL(of_irq_find_parent);
-  * @addr:	address specifier (start of "reg" property of the device) in be32 format
-  * @out_irq:	structure of_phandle_args updated by this function
-  *
-- * Returns 0 on success and a negative number on error
-- *
-  * This function is a low-level interrupt tree walking function. It
-  * can be used to do a partial walk with synthetized reg and interrupts
-  * properties, for example when resolving PCI interrupts when no device
-  * node exist for the parent. It takes an interrupt specifier structure as
-  * input, walks the tree looking for any interrupt-map properties, translates
-  * the specifier for each map, and then returns the translated map.
-+ *
-+ * Return: 0 on success and a negative number on error
-  */
- int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
- {
-@@ -380,7 +380,7 @@ EXPORT_SYMBOL_GPL(of_irq_to_resource);
-  * @dev: pointer to device tree node
-  * @index: zero-based index of the IRQ
-  *
-- * Returns Linux IRQ number on success, or 0 on the IRQ mapping failure, or
-+ * Return: Linux IRQ number on success, or 0 on the IRQ mapping failure, or
-  * -EPROBE_DEFER if the IRQ domain is not yet created, or error code in case
-  * of any other failure.
-  */
-@@ -407,7 +407,7 @@ EXPORT_SYMBOL_GPL(of_irq_get);
-  * @dev: pointer to device tree node
-  * @name: IRQ name
-  *
-- * Returns Linux IRQ number on success, or 0 on the IRQ mapping failure, or
-+ * Return: Linux IRQ number on success, or 0 on the IRQ mapping failure, or
-  * -EPROBE_DEFER if the IRQ domain is not yet created, or error code in case
-  * of any other failure.
-  */
-@@ -447,7 +447,7 @@ int of_irq_count(struct device_node *dev
-  * @res: array of resources to fill in
-  * @nr_irqs: the number of IRQs (and upper bound for num of @res elements)
-  *
-- * Returns the size of the filled in table (up to @nr_irqs).
-+ * Return: The size of the filled in table (up to @nr_irqs).
-  */
- int of_irq_to_resource_table(struct device_node *dev, struct resource *res,
- 		int nr_irqs)
-@@ -602,7 +602,7 @@ static u32 __of_msi_map_id(struct device
-  * Walk up the device hierarchy looking for devices with a "msi-map"
-  * property.  If found, apply the mapping to @id_in.
-  *
-- * Returns the mapped MSI ID.
-+ * Return: The mapped MSI ID.
-  */
- u32 of_msi_map_id(struct device *dev, struct device_node *msi_np, u32 id_in)
- {
---- a/drivers/of/overlay.c
-+++ b/drivers/of/overlay.c
-@@ -296,7 +296,7 @@ err_free_target_path:
-  *
-  * Update of property in symbols node is not allowed.
-  *
-- * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
-+ * Return: 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
-  * invalid @overlay.
-  */
- static int add_changeset_property(struct overlay_changeset *ovcs,
-@@ -401,7 +401,7 @@ static int add_changeset_property(struct
-  *
-  * NOTE_2: Multiple mods of created nodes not supported.
-  *
-- * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
-+ * Return: 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
-  * invalid @overlay.
-  */
- static int add_changeset_node(struct overlay_changeset *ovcs,
-@@ -473,7 +473,7 @@ static int add_changeset_node(struct ove
-  *
-  * Do not allow symbols node to have any children.
-  *
-- * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
-+ * Return: 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
-  * invalid @overlay_node.
-  */
- static int build_changeset_next_level(struct overlay_changeset *ovcs,
-@@ -604,7 +604,7 @@ static int find_dup_cset_prop(struct ove
-  * the same node or duplicate {add, delete, or update} properties entries
-  * for the same property.
-  *
-- * Returns 0 on success, or -EINVAL if duplicate changeset entry found.
-+ * Return: 0 on success, or -EINVAL if duplicate changeset entry found.
-  */
- static int changeset_dup_entry_check(struct overlay_changeset *ovcs)
- {
-@@ -628,7 +628,7 @@ static int changeset_dup_entry_check(str
-  * any portions of the changeset that were successfully created will remain
-  * in @ovcs->cset.
-  *
-- * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
-+ * Return: 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
-  * invalid overlay in @ovcs->fragments[].
-  */
- static int build_changeset(struct overlay_changeset *ovcs)
-@@ -724,7 +724,7 @@ static struct device_node *find_target(s
-  * the top level of @tree.  The relevant top level nodes are the fragment
-  * nodes and the __symbols__ node.  Any other top level node will be ignored.
-  *
-- * Returns 0 on success, -ENOMEM if memory allocation failure, -EINVAL if error
-+ * Return: 0 on success, -ENOMEM if memory allocation failure, -EINVAL if error
-  * detected in @tree, or -ENOSPC if idr_alloc() error.
-  */
- static int init_overlay_changeset(struct overlay_changeset *ovcs,
-@@ -1179,7 +1179,7 @@ static int overlay_removal_is_ok(struct
-  * If an error is returned by an overlay changeset post-remove notifier
-  * then no further overlay changeset post-remove notifier will be called.
-  *
-- * Returns 0 on success, or a negative error number.  *ovcs_id is set to
-+ * Return: 0 on success, or a negative error number.  *ovcs_id is set to
-  * zero after reverting the changeset, even if a subsequent error occurs.
-  */
- int of_overlay_remove(int *ovcs_id)
-@@ -1257,7 +1257,7 @@ EXPORT_SYMBOL_GPL(of_overlay_remove);
-  *
-  * Removes all overlays from the system in the correct order.
-  *
-- * Returns 0 on success, or a negative error number
-+ * Return: 0 on success, or a negative error number
-  */
- int of_overlay_remove_all(void)
- {
---- a/drivers/of/platform.c
-+++ b/drivers/of/platform.c
-@@ -44,7 +44,7 @@ static const struct of_device_id of_skip
-  * Takes a reference to the embedded struct device which needs to be dropped
-  * after use.
-  *
-- * Returns platform_device pointer, or NULL if not found
-+ * Return: platform_device pointer, or NULL if not found
-  */
- struct platform_device *of_find_device_by_node(struct device_node *np)
- {
-@@ -160,7 +160,7 @@ EXPORT_SYMBOL(of_device_alloc);
-  * @platform_data: pointer to populate platform_data pointer with
-  * @parent: Linux device model parent device.
-  *
-- * Returns pointer to created platform device, or NULL if a device was not
-+ * Return: Pointer to created platform device, or NULL if a device was not
-  * registered.  Unavailable devices will not get registered.
-  */
- static struct platform_device *of_platform_device_create_pdata(
-@@ -204,7 +204,7 @@ err_clear_flag:
-  * @bus_id: name to assign device
-  * @parent: Linux device model parent device.
-  *
-- * Returns pointer to created platform device, or NULL if a device was not
-+ * Return: Pointer to created platform device, or NULL if a device was not
-  * registered.  Unavailable devices will not get registered.
-  */
- struct platform_device *of_platform_device_create(struct device_node *np,
-@@ -463,7 +463,7 @@ EXPORT_SYMBOL(of_platform_bus_probe);
-  * New board support should be using this function instead of
-  * of_platform_bus_probe().
-  *
-- * Returns 0 on success, < 0 on failure.
-+ * Return: 0 on success, < 0 on failure.
-  */
- int of_platform_populate(struct device_node *root,
- 			const struct of_device_id *matches,
-@@ -608,7 +608,7 @@ static void devm_of_platform_populate_re
-  * Similar to of_platform_populate(), but will automatically call
-  * of_platform_depopulate() when the device is unbound from the bus.
-  *
-- * Returns 0 on success, < 0 on failure.
-+ * Return: 0 on success, < 0 on failure.
-  */
- int devm_of_platform_populate(struct device *dev)
- {
---- a/drivers/of/property.c
-+++ b/drivers/of/property.c
-@@ -60,9 +60,11 @@ EXPORT_SYMBOL(of_graph_is_present);
-  * @elem_size:	size of the individual element
-  *
-  * Search for a property in a device node and count the number of elements of
-- * size elem_size in it. Returns number of elements on sucess, -EINVAL if the
-- * property does not exist or its length does not match a multiple of elem_size
-- * and -ENODATA if the property does not have a value.
-+ * size elem_size in it.
-+ *
-+ * Return: The number of elements on sucess, -EINVAL if the property does not
-+ * exist or its length does not match a multiple of elem_size and -ENODATA if
-+ * the property does not have a value.
-  */
- int of_property_count_elems_of_size(const struct device_node *np,
- 				const char *propname, int elem_size)
-@@ -94,8 +96,9 @@ EXPORT_SYMBOL_GPL(of_property_count_elem
-  * @len:	if !=NULL, actual length is written to here
-  *
-  * Search for a property in a device node and valid the requested size.
-- * Returns the property value on success, -EINVAL if the property does not
-- *  exist, -ENODATA if property does not have a value, and -EOVERFLOW if the
-+ *
-+ * Return: The property value on success, -EINVAL if the property does not
-+ * exist, -ENODATA if property does not have a value, and -EOVERFLOW if the
-  * property data is too small or too large.
-  *
-  */
-@@ -128,7 +131,9 @@ static void *of_find_property_value_of_s
-  * @out_value:	pointer to return value, modified only if no error.
-  *
-  * Search for a property in a device node and read nth 32-bit value from
-- * it. Returns 0 on success, -EINVAL if the property does not exist,
-+ * it.
-+ *
-+ * Return: 0 on success, -EINVAL if the property does not exist,
-  * -ENODATA if property does not have a value, and -EOVERFLOW if the
-  * property data isn't large enough.
-  *
-@@ -160,7 +165,9 @@ EXPORT_SYMBOL_GPL(of_property_read_u32_i
-  * @out_value:	pointer to return value, modified only if no error.
-  *
-  * Search for a property in a device node and read nth 64-bit value from
-- * it. Returns 0 on success, -EINVAL if the property does not exist,
-+ * it.
-+ *
-+ * Return: 0 on success, -EINVAL if the property does not exist,
-  * -ENODATA if property does not have a value, and -EOVERFLOW if the
-  * property data isn't large enough.
-  *
-@@ -195,12 +202,14 @@ EXPORT_SYMBOL_GPL(of_property_read_u64_i
-  *		sz_min will be read.
-  *
-  * Search for a property in a device node and read 8-bit value(s) from
-- * it. Returns number of elements read on success, -EINVAL if the property
-- * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
-- * if the property data is smaller than sz_min or longer than sz_max.
-+ * it.
-  *
-  * dts entry of array should be like:
-- *	property = /bits/ 8 <0x50 0x60 0x70>;
-+ *  ``property = /bits/ 8 <0x50 0x60 0x70>;``
-+ *
-+ * Return: The number of elements read on success, -EINVAL if the property
-+ * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
-+ * if the property data is smaller than sz_min or longer than sz_max.
-  *
-  * The out_values is modified only if a valid u8 value can be decoded.
-  */
-@@ -243,12 +252,14 @@ EXPORT_SYMBOL_GPL(of_property_read_varia
-  *		sz_min will be read.
-  *
-  * Search for a property in a device node and read 16-bit value(s) from
-- * it. Returns number of elements read on success, -EINVAL if the property
-- * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
-- * if the property data is smaller than sz_min or longer than sz_max.
-+ * it.
-  *
-  * dts entry of array should be like:
-- *	property = /bits/ 16 <0x5000 0x6000 0x7000>;
-+ *  ``property = /bits/ 16 <0x5000 0x6000 0x7000>;``
-+ *
-+ * Return: The number of elements read on success, -EINVAL if the property
-+ * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
-+ * if the property data is smaller than sz_min or longer than sz_max.
-  *
-  * The out_values is modified only if a valid u16 value can be decoded.
-  */
-@@ -291,7 +302,9 @@ EXPORT_SYMBOL_GPL(of_property_read_varia
-  *		sz_min will be read.
-  *
-  * Search for a property in a device node and read 32-bit value(s) from
-- * it. Returns number of elements read on success, -EINVAL if the property
-+ * it.
-+ *
-+ * Return: The number of elements read on success, -EINVAL if the property
-  * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
-  * if the property data is smaller than sz_min or longer than sz_max.
-  *
-@@ -330,7 +343,9 @@ EXPORT_SYMBOL_GPL(of_property_read_varia
-  * @out_value:	pointer to return value, modified only if return value is 0.
-  *
-  * Search for a property in a device node and read a 64-bit value from
-- * it. Returns 0 on success, -EINVAL if the property does not exist,
-+ * it.
-+ *
-+ * Return: 0 on success, -EINVAL if the property does not exist,
-  * -ENODATA if property does not have a value, and -EOVERFLOW if the
-  * property data isn't large enough.
-  *
-@@ -365,7 +380,9 @@ EXPORT_SYMBOL_GPL(of_property_read_u64);
-  *		sz_min will be read.
-  *
-  * Search for a property in a device node and read 64-bit value(s) from
-- * it. Returns number of elements read on success, -EINVAL if the property
-+ * it.
-+ *
-+ * Return: The number of elements read on success, -EINVAL if the property
-  * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
-  * if the property data is smaller than sz_min or longer than sz_max.
-  *
-@@ -407,10 +424,11 @@ EXPORT_SYMBOL_GPL(of_property_read_varia
-  *		return value is 0.
-  *
-  * Search for a property in a device tree node and retrieve a null
-- * terminated string value (pointer to data, not a copy). Returns 0 on
-- * success, -EINVAL if the property does not exist, -ENODATA if property
-- * does not have a value, and -EILSEQ if the string is not null-terminated
-- * within the length of the property data.
-+ * terminated string value (pointer to data, not a copy).
-+ *
-+ * Return: 0 on success, -EINVAL if the property does not exist, -ENODATA if
-+ * property does not have a value, and -EILSEQ if the string is not
-+ * null-terminated within the length of the property data.
-  *
-  * The out_string pointer is modified only if a valid string can be decoded.
-  */
-@@ -774,7 +792,7 @@ EXPORT_SYMBOL(of_graph_get_remote_port_p
-  * @node: pointer to a local endpoint device_node
-  *
-  * Return: Remote port node associated with remote endpoint node linked
-- *	   to @node. Use of_node_put() on it when done.
-+ * to @node. Use of_node_put() on it when done.
-  */
- struct device_node *of_graph_get_remote_port(const struct device_node *node)
- {
-@@ -807,7 +825,7 @@ EXPORT_SYMBOL(of_graph_get_endpoint_coun
-  * @endpoint: identifier (value of reg property) of the endpoint node
-  *
-  * Return: Remote device node associated with remote endpoint node linked
-- *	   to @node. Use of_node_put() on it when done.
-+ * to @node. Use of_node_put() on it when done.
-  */
- struct device_node *of_graph_get_remote_node(const struct device_node *node,
- 					     u32 port, u32 endpoint)
---- a/include/linux/of.h
-+++ b/include/linux/of.h
-@@ -424,12 +424,14 @@ extern int of_detach_node(struct device_
-  * @sz:		number of array elements to read
-  *
-  * Search for a property in a device node and read 8-bit value(s) from
-- * it. Returns 0 on success, -EINVAL if the property does not exist,
-- * -ENODATA if property does not have a value, and -EOVERFLOW if the
-- * property data isn't large enough.
-+ * it.
-  *
-  * dts entry of array should be like:
-- *	property = /bits/ 8 <0x50 0x60 0x70>;
-+ *  ``property = /bits/ 8 <0x50 0x60 0x70>;``
-+ *
-+ * Return: 0 on success, -EINVAL if the property does not exist,
-+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
-+ * property data isn't large enough.
-  *
-  * The out_values is modified only if a valid u8 value can be decoded.
-  */
-@@ -454,12 +456,14 @@ static inline int of_property_read_u8_ar
-  * @sz:		number of array elements to read
-  *
-  * Search for a property in a device node and read 16-bit value(s) from
-- * it. Returns 0 on success, -EINVAL if the property does not exist,
-- * -ENODATA if property does not have a value, and -EOVERFLOW if the
-- * property data isn't large enough.
-+ * it.
-  *
-  * dts entry of array should be like:
-- *	property = /bits/ 16 <0x5000 0x6000 0x7000>;
-+ *  ``property = /bits/ 16 <0x5000 0x6000 0x7000>;``
-+ *
-+ * Return: 0 on success, -EINVAL if the property does not exist,
-+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
-+ * property data isn't large enough.
-  *
-  * The out_values is modified only if a valid u16 value can be decoded.
-  */
-@@ -485,7 +489,9 @@ static inline int of_property_read_u16_a
-  * @sz:		number of array elements to read
-  *
-  * Search for a property in a device node and read 32-bit value(s) from
-- * it. Returns 0 on success, -EINVAL if the property does not exist,
-+ * it.
-+ *
-+ * Return: 0 on success, -EINVAL if the property does not exist,
-  * -ENODATA if property does not have a value, and -EOVERFLOW if the
-  * property data isn't large enough.
-  *
-@@ -513,7 +519,9 @@ static inline int of_property_read_u32_a
-  * @sz:		number of array elements to read
-  *
-  * Search for a property in a device node and read 64-bit value(s) from
-- * it. Returns 0 on success, -EINVAL if the property does not exist,
-+ * it.
-+ *
-+ * Return: 0 on success, -EINVAL if the property does not exist,
-  * -ENODATA if property does not have a value, and -EOVERFLOW if the
-  * property data isn't large enough.
-  *
-@@ -1063,7 +1071,9 @@ static inline bool of_node_is_type(const
-  * @propname:	name of the property to be searched.
-  *
-  * Search for a property in a device node and count the number of u8 elements
-- * in it. Returns number of elements on sucess, -EINVAL if the property does
-+ * in it.
-+ *
-+ * Return: The number of elements on sucess, -EINVAL if the property does
-  * not exist or its length does not match a multiple of u8 and -ENODATA if the
-  * property does not have a value.
-  */
-@@ -1080,7 +1090,9 @@ static inline int of_property_count_u8_e
-  * @propname:	name of the property to be searched.
-  *
-  * Search for a property in a device node and count the number of u16 elements
-- * in it. Returns number of elements on sucess, -EINVAL if the property does
-+ * in it.
-+ *
-+ * Return: The number of elements on sucess, -EINVAL if the property does
-  * not exist or its length does not match a multiple of u16 and -ENODATA if the
-  * property does not have a value.
-  */
-@@ -1097,7 +1109,9 @@ static inline int of_property_count_u16_
-  * @propname:	name of the property to be searched.
-  *
-  * Search for a property in a device node and count the number of u32 elements
-- * in it. Returns number of elements on sucess, -EINVAL if the property does
-+ * in it.
-+ *
-+ * Return: The number of elements on sucess, -EINVAL if the property does
-  * not exist or its length does not match a multiple of u32 and -ENODATA if the
-  * property does not have a value.
-  */
-@@ -1114,7 +1128,9 @@ static inline int of_property_count_u32_
-  * @propname:	name of the property to be searched.
-  *
-  * Search for a property in a device node and count the number of u64 elements
-- * in it. Returns number of elements on sucess, -EINVAL if the property does
-+ * in it.
-+ *
-+ * Return: The number of elements on sucess, -EINVAL if the property does
-  * not exist or its length does not match a multiple of u64 and -ENODATA if the
-  * property does not have a value.
-  */
-@@ -1135,7 +1151,7 @@ static inline int of_property_count_u64_
-  * Search for a property in a device tree node and retrieve a list of
-  * terminated string values (pointer to data, not a copy) in that property.
-  *
-- * If @out_strs is NULL, the number of strings in the property is returned.
-+ * Return: If @out_strs is NULL, the number of strings in the property is returned.
-  */
- static inline int of_property_read_string_array(const struct device_node *np,
- 						const char *propname, const char **out_strs,
-@@ -1151,10 +1167,11 @@ static inline int of_property_read_strin
-  * @propname:	name of the property to be searched.
-  *
-  * Search for a property in a device tree node and retrieve the number of null
-- * terminated string contain in it. Returns the number of strings on
-- * success, -EINVAL if the property does not exist, -ENODATA if property
-- * does not have a value, and -EILSEQ if the string is not null-terminated
-- * within the length of the property data.
-+ * terminated string contain in it.
-+ *
-+ * Return: The number of strings on success, -EINVAL if the property does not
-+ * exist, -ENODATA if property does not have a value, and -EILSEQ if the string
-+ * is not null-terminated within the length of the property data.
-  */
- static inline int of_property_count_strings(const struct device_node *np,
- 					    const char *propname)
-@@ -1174,7 +1191,8 @@ static inline int of_property_count_stri
-  * Search for a property in a device tree node and retrieve a null
-  * terminated string value (pointer to data, not a copy) in the list of strings
-  * contained in that property.
-- * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
-+ *
-+ * Return: 0 on success, -EINVAL if the property does not exist, -ENODATA if
-  * property does not have a value, and -EILSEQ if the string is not
-  * null-terminated within the length of the property data.
-  *
-@@ -1194,7 +1212,8 @@ static inline int of_property_read_strin
-  * @propname:	name of the property to be searched.
-  *
-  * Search for a property in a device node.
-- * Returns true if the property exists false otherwise.
-+ *
-+ * Return: true if the property exists false otherwise.
-  */
- static inline bool of_property_read_bool(const struct device_node *np,
- 					 const char *propname)
-@@ -1440,7 +1459,7 @@ static inline int of_reconfig_get_state_
-  * of_device_is_system_power_controller - Tells if system-power-controller is found for device_node
-  * @np: Pointer to the given device_node
-  *
-- * return true if present false otherwise
-+ * Return: true if present false otherwise
-  */
- static inline bool of_device_is_system_power_controller(const struct device_node *np)
- {
diff --git a/target/linux/generic/backport-5.10/732-v5.13-0007-of-base-Fix-spelling-issue-with-function-param-prop.patch b/target/linux/generic/backport-5.10/732-v5.13-0007-of-base-Fix-spelling-issue-with-function-param-prop.patch
deleted file mode 100644
index 64197d7482e2..000000000000
--- a/target/linux/generic/backport-5.10/732-v5.13-0007-of-base-Fix-spelling-issue-with-function-param-prop.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 31e46db02ac1351c84e56a18606d17fc1b8390dd Mon Sep 17 00:00:00 2001
-From: Lee Jones <lee.jones@linaro.org>
-Date: Mon, 29 Mar 2021 16:24:35 +0100
-Subject: [PATCH] of: base: Fix spelling issue with function param 'prop'
-
-Fixes the following W=1 kernel build warning(s):
-
- drivers/of/base.c:1781: warning: Function parameter or member 'prop' not described in '__of_add_property'
- drivers/of/base.c:1781: warning: Excess function parameter 'prob' description in '__of_add_property'
- drivers/of/base.c:1804: warning: Function parameter or member 'prop' not described in 'of_add_property'
- drivers/of/base.c:1804: warning: Excess function parameter 'prob' description in 'of_add_property'
- drivers/of/base.c:1855: warning: Function parameter or member 'prop' not described in 'of_remove_property'
- drivers/of/base.c:1855: warning: Excess function parameter 'prob' description in 'of_remove_property'
-
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: Frank Rowand <frowand.list@gmail.com>
-Cc: "David S. Miller" <davem@davemloft.net>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Link: https://lore.kernel.org/r/20210329152435.900225-1-lee.jones@linaro.org
-Signed-off-by: Rob Herring <robh@kernel.org>
----
- drivers/of/base.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/of/base.c
-+++ b/drivers/of/base.c
-@@ -1780,7 +1780,7 @@ EXPORT_SYMBOL(of_count_phandle_with_args
- /**
-  * __of_add_property - Add a property to a node without lock operations
-  * @np:		Caller's Device Node
-- * @prob:	Property to add
-+ * @prop:	Property to add
-  */
- int __of_add_property(struct device_node *np, struct property *prop)
- {
-@@ -1803,7 +1803,7 @@ int __of_add_property(struct device_node
- /**
-  * of_add_property - Add a property to a node
-  * @np:		Caller's Device Node
-- * @prob:	Property to add
-+ * @prop:	Property to add
-  */
- int of_add_property(struct device_node *np, struct property *prop)
- {
-@@ -1849,7 +1849,7 @@ int __of_remove_property(struct device_n
- /**
-  * of_remove_property - Remove a property from a node.
-  * @np:		Caller's Device Node
-- * @prob:	Property to remove
-+ * @prop:	Property to remove
-  *
-  * Note that we don't actually remove it, since we have given out
-  * who-knows-how-many pointers to the data using get-property.
diff --git a/target/linux/generic/backport-5.10/732-v5.13-0008-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch b/target/linux/generic/backport-5.10/732-v5.13-0008-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch
deleted file mode 100644
index 583abc9c8083..000000000000
--- a/target/linux/generic/backport-5.10/732-v5.13-0008-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch
+++ /dev/null
@@ -1,1935 +0,0 @@
-From 83216e3988cd196183542937c9bd58b279f946af Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 12 Apr 2021 19:47:17 +0200
-Subject: [PATCH] of: net: pass the dst buffer to of_get_mac_address()
-
-of_get_mac_address() returns a "const void*" pointer to a MAC address.
-Lately, support to fetch the MAC address by an NVMEM provider was added.
-But this will only work with platform devices. It will not work with
-PCI devices (e.g. of an integrated root complex) and esp. not with DSA
-ports.
-
-There is an of_* variant of the nvmem binding which works without
-devices. The returned data of a nvmem_cell_read() has to be freed after
-use. On the other hand the return of_get_mac_address() points to some
-static data without a lifetime. The trick for now, was to allocate a
-device resource managed buffer which is then returned. This will only
-work if we have an actual device.
-
-Change it, so that the caller of of_get_mac_address() has to supply a
-buffer where the MAC address is written to. Unfortunately, this will
-touch all drivers which use the of_get_mac_address().
-
-Usually the code looks like:
-
-  const char *addr;
-  addr = of_get_mac_address(np);
-  if (!IS_ERR(addr))
-    ether_addr_copy(ndev->dev_addr, addr);
-
-This can then be simply rewritten as:
-
-  of_get_mac_address(np, ndev->dev_addr);
-
-Sometimes is_valid_ether_addr() is used to test the MAC address.
-of_get_mac_address() already makes sure, it just returns a valid MAC
-address. Thus we can just test its return code. But we have to be
-careful if there are still other sources for the MAC address before the
-of_get_mac_address(). In this case we have to keep the
-is_valid_ether_addr() call.
-
-The following coccinelle patch was used to convert common cases to the
-new style. Afterwards, I've manually gone over the drivers and fixed the
-return code variable: either used a new one or if one was already
-available use that. Mansour Moufid, thanks for that coccinelle patch!
-
-<spml>
-@a@
-identifier x;
-expression y, z;
-@@
-- x = of_get_mac_address(y);
-+ x = of_get_mac_address(y, z);
-  <...
-- ether_addr_copy(z, x);
-  ...>
-
-@@
-identifier a.x;
-@@
-- if (<+... x ...+>) {}
-
-@@
-identifier a.x;
-@@
-  if (<+... x ...+>) {
-      ...
-  }
-- else {}
-
-@@
-identifier a.x;
-expression e;
-@@
-- if (<+... x ...+>@e)
--     {}
-- else
-+ if (!(e))
-      {...}
-
-@@
-expression x, y, z;
-@@
-- x = of_get_mac_address(y, z);
-+ of_get_mac_address(y, z);
-  ... when != x
-</spml>
-
-All drivers, except drivers/net/ethernet/aeroflex/greth.c, were
-compile-time tested.
-
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Michael Walle <michael@walle.cc>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- arch/arm/mach-mvebu/kirkwood.c                     |  3 +-
- arch/powerpc/sysdev/tsi108_dev.c                   |  5 +-
- drivers/net/ethernet/aeroflex/greth.c              |  6 +--
- drivers/net/ethernet/allwinner/sun4i-emac.c        | 10 ++--
- drivers/net/ethernet/altera/altera_tse_main.c      |  7 +--
- drivers/net/ethernet/arc/emac_main.c               |  8 +--
- drivers/net/ethernet/atheros/ag71xx.c              |  7 +--
- drivers/net/ethernet/broadcom/bcm4908_enet.c       |  7 +--
- drivers/net/ethernet/broadcom/bcmsysport.c         |  7 +--
- drivers/net/ethernet/broadcom/bgmac-bcma.c         | 10 ++--
- drivers/net/ethernet/broadcom/bgmac-platform.c     | 11 ++--
- drivers/net/ethernet/cadence/macb_main.c           | 11 ++--
- drivers/net/ethernet/cavium/octeon/octeon_mgmt.c   |  8 +--
- drivers/net/ethernet/cavium/thunder/thunder_bgx.c  |  5 +-
- drivers/net/ethernet/davicom/dm9000.c              | 10 ++--
- drivers/net/ethernet/ethoc.c                       |  6 +--
- drivers/net/ethernet/ezchip/nps_enet.c             |  7 +--
- drivers/net/ethernet/freescale/fec_main.c          |  7 +--
- drivers/net/ethernet/freescale/fec_mpc52xx.c       |  7 +--
- drivers/net/ethernet/freescale/fman/mac.c          |  9 ++--
- .../net/ethernet/freescale/fs_enet/fs_enet-main.c  |  5 +-
- drivers/net/ethernet/freescale/gianfar.c           |  8 +--
- drivers/net/ethernet/freescale/ucc_geth.c          |  5 +-
- drivers/net/ethernet/hisilicon/hisi_femac.c        |  7 +--
- drivers/net/ethernet/hisilicon/hix5hd2_gmac.c      |  7 +--
- drivers/net/ethernet/lantiq_xrx200.c               |  7 +--
- drivers/net/ethernet/marvell/mv643xx_eth.c         |  5 +-
- drivers/net/ethernet/marvell/mvneta.c              |  6 +--
- .../net/ethernet/marvell/prestera/prestera_main.c  | 11 ++--
- drivers/net/ethernet/marvell/pxa168_eth.c          |  9 +---
- drivers/net/ethernet/marvell/sky2.c                |  8 ++-
- drivers/net/ethernet/mediatek/mtk_eth_soc.c        | 11 ++--
- drivers/net/ethernet/micrel/ks8851_common.c        |  7 ++-
- drivers/net/ethernet/microchip/lan743x_main.c      |  5 +-
- drivers/net/ethernet/nxp/lpc_eth.c                 |  4 +-
- drivers/net/ethernet/qualcomm/qca_spi.c            | 10 ++--
- drivers/net/ethernet/qualcomm/qca_uart.c           |  9 +---
- drivers/net/ethernet/renesas/ravb_main.c           | 12 +++--
- drivers/net/ethernet/renesas/sh_eth.c              |  5 +-
- .../net/ethernet/samsung/sxgbe/sxgbe_platform.c    | 13 ++---
- drivers/net/ethernet/socionext/sni_ave.c           | 10 ++--
- .../net/ethernet/stmicro/stmmac/dwmac-anarion.c    |  2 +-
- .../ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c    |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-generic.c    |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c    |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-intel-plat.c |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-ipq806x.c    |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c    |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-mediatek.c   |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c  |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-meson8b.c    |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c  |  2 +-
- .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c     |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c    |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c    |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c  |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c  |  2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c  |  2 +-
- .../net/ethernet/stmicro/stmmac/dwmac-visconti.c   |  2 +-
- drivers/net/ethernet/stmicro/stmmac/stmmac.h       |  2 +-
- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  2 +-
- .../net/ethernet/stmicro/stmmac/stmmac_platform.c  | 14 ++---
- .../net/ethernet/stmicro/stmmac/stmmac_platform.h  |  2 +-
- drivers/net/ethernet/ti/am65-cpsw-nuss.c           | 19 ++++---
- drivers/net/ethernet/ti/cpsw.c                     |  7 +--
- drivers/net/ethernet/ti/cpsw_new.c                 |  7 +--
- drivers/net/ethernet/ti/davinci_emac.c             |  8 +--
- drivers/net/ethernet/ti/netcp_core.c               |  7 +--
- drivers/net/ethernet/wiznet/w5100-spi.c            |  8 ++-
- drivers/net/ethernet/wiznet/w5100.c                |  2 +-
- drivers/net/ethernet/xilinx/ll_temac_main.c        |  8 +--
- drivers/net/ethernet/xilinx/xilinx_axienet_main.c  | 15 +++---
- drivers/net/ethernet/xilinx/xilinx_emaclite.c      |  8 +--
- drivers/net/wireless/ath/ath9k/init.c              |  5 +-
- drivers/net/wireless/mediatek/mt76/eeprom.c        |  9 +---
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c     |  6 +--
- drivers/of/of_net.c                                | 60 ++++++++++------------
- drivers/staging/octeon/ethernet.c                  | 10 ++--
- drivers/staging/wfx/main.c                         |  7 ++-
- include/linux/of_net.h                             |  6 +--
- include/net/dsa.h                                  |  2 +-
- net/dsa/dsa2.c                                     |  2 +-
- net/dsa/slave.c                                    |  2 +-
- net/ethernet/eth.c                                 | 11 ++--
- 85 files changed, 218 insertions(+), 364 deletions(-)
-
---- a/arch/arm/mach-mvebu/kirkwood.c
-+++ b/arch/arm/mach-mvebu/kirkwood.c
-@@ -84,6 +84,7 @@ static void __init kirkwood_dt_eth_fixup
- 		struct device_node *pnp = of_get_parent(np);
- 		struct clk *clk;
- 		struct property *pmac;
-+		u8 tmpmac[ETH_ALEN];
- 		void __iomem *io;
- 		u8 *macaddr;
- 		u32 reg;
-@@ -93,7 +94,7 @@ static void __init kirkwood_dt_eth_fixup
- 
- 		/* skip disabled nodes or nodes with valid MAC address*/
- 		if (!of_device_is_available(pnp) ||
--		    !IS_ERR(of_get_mac_address(np)))
-+		    !of_get_mac_address(np, tmpmac))
- 			goto eth_fixup_skip;
- 
- 		clk = of_clk_get(pnp, 0);
---- a/arch/powerpc/sysdev/tsi108_dev.c
-+++ b/arch/powerpc/sysdev/tsi108_dev.c
-@@ -73,7 +73,6 @@ static int __init tsi108_eth_of_init(voi
- 		struct device_node *phy, *mdio;
- 		hw_info tsi_eth_data;
- 		const unsigned int *phy_id;
--		const void *mac_addr;
- 		const phandle *ph;
- 
- 		memset(r, 0, sizeof(r));
-@@ -101,9 +100,7 @@ static int __init tsi108_eth_of_init(voi
- 			goto err;
- 		}
- 
--		mac_addr = of_get_mac_address(np);
--		if (!IS_ERR(mac_addr))
--			ether_addr_copy(tsi_eth_data.mac_addr, mac_addr);
-+		of_get_mac_address(np, tsi_eth_data.mac_addr);
- 
- 		ph = of_get_property(np, "mdio-handle", NULL);
- 		mdio = of_find_node_by_phandle(*ph);
---- a/drivers/net/ethernet/aeroflex/greth.c
-+++ b/drivers/net/ethernet/aeroflex/greth.c
-@@ -1450,10 +1450,10 @@ static int greth_of_probe(struct platfor
- 			break;
- 	}
- 	if (i == 6) {
--		const u8 *addr;
-+		u8 addr[ETH_ALEN];
- 
--		addr = of_get_mac_address(ofdev->dev.of_node);
--		if (!IS_ERR(addr)) {
-+		err = of_get_mac_address(ofdev->dev.of_node, addr);
-+		if (!err) {
- 			for (i = 0; i < 6; i++)
- 				macaddr[i] = (unsigned int) addr[i];
- 		} else {
---- a/drivers/net/ethernet/allwinner/sun4i-emac.c
-+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
-@@ -790,7 +790,6 @@ static int emac_probe(struct platform_de
- 	struct emac_board_info *db;
- 	struct net_device *ndev;
- 	int ret = 0;
--	const char *mac_addr;
- 
- 	ndev = alloc_etherdev(sizeof(struct emac_board_info));
- 	if (!ndev) {
-@@ -853,12 +852,9 @@ static int emac_probe(struct platform_de
- 	}
- 
- 	/* Read MAC-address from DT */
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--
--	/* Check if the MAC address is valid, if not get a random one */
--	if (!is_valid_ether_addr(ndev->dev_addr)) {
-+	ret = of_get_mac_address(np, ndev->dev_addr);
-+	if (ret) {
-+		/* if the MAC address is invalid get a random one */
- 		eth_hw_addr_random(ndev);
- 		dev_warn(&pdev->dev, "using random MAC address %pM\n",
- 			 ndev->dev_addr);
---- a/drivers/net/ethernet/altera/altera_tse_main.c
-+++ b/drivers/net/ethernet/altera/altera_tse_main.c
-@@ -1355,7 +1355,6 @@ static int altera_tse_probe(struct platf
- 	struct resource *control_port;
- 	struct resource *dma_res;
- 	struct altera_tse_private *priv;
--	const unsigned char *macaddr;
- 	void __iomem *descmap;
- 	const struct of_device_id *of_id = NULL;
- 
-@@ -1532,10 +1531,8 @@ static int altera_tse_probe(struct platf
- 	priv->rx_dma_buf_sz = ALTERA_RXDMABUFFER_SIZE;
- 
- 	/* get default MAC address from device tree */
--	macaddr = of_get_mac_address(pdev->dev.of_node);
--	if (!IS_ERR(macaddr))
--		ether_addr_copy(ndev->dev_addr, macaddr);
--	else
-+	ret = of_get_mac_address(pdev->dev.of_node, ndev->dev_addr);
-+	if (ret)
- 		eth_hw_addr_random(ndev);
- 
- 	/* get phy addr and create mdio */
---- a/drivers/net/ethernet/arc/emac_main.c
-+++ b/drivers/net/ethernet/arc/emac_main.c
-@@ -857,7 +857,6 @@ int arc_emac_probe(struct net_device *nd
- 	struct device_node *phy_node;
- 	struct phy_device *phydev = NULL;
- 	struct arc_emac_priv *priv;
--	const char *mac_addr;
- 	unsigned int id, clock_frequency, irq;
- 	int err;
- 
-@@ -942,11 +941,8 @@ int arc_emac_probe(struct net_device *nd
- 	}
- 
- 	/* Get MAC address from device tree */
--	mac_addr = of_get_mac_address(dev->of_node);
--
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--	else
-+	err = of_get_mac_address(dev->of_node, ndev->dev_addr);
-+	if (err)
- 		eth_hw_addr_random(ndev);
- 
- 	arc_emac_set_address_internal(ndev);
---- a/drivers/net/ethernet/atheros/ag71xx.c
-+++ b/drivers/net/ethernet/atheros/ag71xx.c
-@@ -1857,7 +1857,6 @@ static int ag71xx_probe(struct platform_
- 	const struct ag71xx_dcfg *dcfg;
- 	struct net_device *ndev;
- 	struct resource *res;
--	const void *mac_addr;
- 	int tx_size, err, i;
- 	struct ag71xx *ag;
- 
-@@ -1953,10 +1952,8 @@ static int ag71xx_probe(struct platform_
- 	ag->stop_desc->ctrl = 0;
- 	ag->stop_desc->next = (u32)ag->stop_desc_dma;
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		memcpy(ndev->dev_addr, mac_addr, ETH_ALEN);
--	if (IS_ERR(mac_addr) || !is_valid_ether_addr(ndev->dev_addr)) {
-+	err = of_get_mac_address(np, ndev->dev_addr);
-+	if (err) {
- 		netif_err(ag, probe, ndev, "invalid MAC address, using random address\n");
- 		eth_random_addr(ndev->dev_addr);
- 	}
---- a/drivers/net/ethernet/broadcom/bcmsysport.c
-+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
-@@ -2468,7 +2468,6 @@ static int bcm_sysport_probe(struct plat
- 	struct bcm_sysport_priv *priv;
- 	struct device_node *dn;
- 	struct net_device *dev;
--	const void *macaddr;
- 	u32 txq, rxq;
- 	int ret;
- 
-@@ -2563,12 +2562,10 @@ static int bcm_sysport_probe(struct plat
- 	}
- 
- 	/* Initialize netdevice members */
--	macaddr = of_get_mac_address(dn);
--	if (IS_ERR(macaddr)) {
-+	ret = of_get_mac_address(dn, dev->dev_addr);
-+	if (ret) {
- 		dev_warn(&pdev->dev, "using random Ethernet MAC\n");
- 		eth_hw_addr_random(dev);
--	} else {
--		ether_addr_copy(dev->dev_addr, macaddr);
- 	}
- 
- 	SET_NETDEV_DEV(dev, &pdev->dev);
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -115,7 +115,7 @@ static int bgmac_probe(struct bcma_devic
- 	struct ssb_sprom *sprom = &core->bus->sprom;
- 	struct mii_bus *mii_bus;
- 	struct bgmac *bgmac;
--	const u8 *mac = NULL;
-+	const u8 *mac;
- 	int err;
- 
- 	bgmac = bgmac_alloc(&core->dev);
-@@ -128,11 +128,10 @@ static int bgmac_probe(struct bcma_devic
- 
- 	bcma_set_drvdata(core, bgmac);
- 
--	if (bgmac->dev->of_node)
--		mac = of_get_mac_address(bgmac->dev->of_node);
-+	err = of_get_mac_address(bgmac->dev->of_node, bgmac->net_dev->dev_addr);
- 
- 	/* If no MAC address assigned via device tree, check SPROM */
--	if (IS_ERR_OR_NULL(mac)) {
-+	if (err) {
- 		switch (core->core_unit) {
- 		case 0:
- 			mac = sprom->et0mac;
-@@ -149,10 +148,9 @@ static int bgmac_probe(struct bcma_devic
- 			err = -ENOTSUPP;
- 			goto err;
- 		}
-+		ether_addr_copy(bgmac->net_dev->dev_addr, mac);
- 	}
- 
--	ether_addr_copy(bgmac->net_dev->dev_addr, mac);
--
- 	/* On BCM4706 we need common core to access PHY */
- 	if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
- 	    !core->bus->drv_gmac_cmn.core) {
---- a/drivers/net/ethernet/broadcom/bgmac-platform.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-platform.c
-@@ -173,7 +173,7 @@ static int bgmac_probe(struct platform_d
- 	struct device_node *np = pdev->dev.of_node;
- 	struct bgmac *bgmac;
- 	struct resource *regs;
--	const u8 *mac_addr;
-+	int ret;
- 
- 	bgmac = bgmac_alloc(&pdev->dev);
- 	if (!bgmac)
-@@ -192,11 +192,10 @@ static int bgmac_probe(struct platform_d
- 	bgmac->dev = &pdev->dev;
- 	bgmac->dma_dev = &pdev->dev;
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(bgmac->net_dev->dev_addr, mac_addr);
--	else
--		dev_warn(&pdev->dev, "MAC address not present in device tree\n");
-+	ret = of_get_mac_address(np, bgmac->net_dev->dev_addr);
-+	if (ret)
-+		dev_warn(&pdev->dev,
-+			 "MAC address not present in device tree\n");
- 
- 	bgmac->irq = platform_get_irq(pdev, 0);
- 	if (bgmac->irq < 0)
---- a/drivers/net/ethernet/cadence/macb_main.c
-+++ b/drivers/net/ethernet/cadence/macb_main.c
-@@ -4484,7 +4484,6 @@ static int macb_probe(struct platform_de
- 	struct net_device *dev;
- 	struct resource *regs;
- 	void __iomem *mem;
--	const char *mac;
- 	struct macb *bp;
- 	int err, val;
- 
-@@ -4597,15 +4596,11 @@ static int macb_probe(struct platform_de
- 	if (bp->caps & MACB_CAPS_NEEDS_RSTONUBR)
- 		bp->rx_intr_mask |= MACB_BIT(RXUBR);
- 
--	mac = of_get_mac_address(np);
--	if (PTR_ERR(mac) == -EPROBE_DEFER) {
--		err = -EPROBE_DEFER;
-+	err = of_get_mac_address(np, bp->dev->dev_addr);
-+	if (err == -EPROBE_DEFER)
- 		goto err_out_free_netdev;
--	} else if (!IS_ERR_OR_NULL(mac)) {
--		ether_addr_copy(bp->dev->dev_addr, mac);
--	} else {
-+	else if (err)
- 		macb_get_hwaddr(bp);
--	}
- 
- 	err = of_get_phy_mode(np, &interface);
- 	if (err)
---- a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
-+++ b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
-@@ -1385,7 +1385,6 @@ static int octeon_mgmt_probe(struct plat
- 	struct net_device *netdev;
- 	struct octeon_mgmt *p;
- 	const __be32 *data;
--	const u8 *mac;
- 	struct resource *res_mix;
- 	struct resource *res_agl;
- 	struct resource *res_agl_prt_ctl;
-@@ -1502,11 +1501,8 @@ static int octeon_mgmt_probe(struct plat
- 	netdev->min_mtu = 64 - OCTEON_MGMT_RX_HEADROOM;
- 	netdev->max_mtu = 16383 - OCTEON_MGMT_RX_HEADROOM - VLAN_HLEN;
- 
--	mac = of_get_mac_address(pdev->dev.of_node);
--
--	if (!IS_ERR(mac))
--		ether_addr_copy(netdev->dev_addr, mac);
--	else
-+	result = of_get_mac_address(pdev->dev.of_node, netdev->dev_addr);
-+	if (result)
- 		eth_hw_addr_random(netdev);
- 
- 	p->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
---- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
-+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
-@@ -1476,7 +1476,6 @@ static int bgx_init_of_phy(struct bgx *b
- 	device_for_each_child_node(&bgx->pdev->dev, fwn) {
- 		struct phy_device *pd;
- 		struct device_node *phy_np;
--		const char *mac;
- 
- 		/* Should always be an OF node.  But if it is not, we
- 		 * cannot handle it, so exit the loop.
-@@ -1485,9 +1484,7 @@ static int bgx_init_of_phy(struct bgx *b
- 		if (!node)
- 			break;
- 
--		mac = of_get_mac_address(node);
--		if (!IS_ERR(mac))
--			ether_addr_copy(bgx->lmac[lmac].mac, mac);
-+		of_get_mac_address(node, bgx->lmac[lmac].mac);
- 
- 		SET_NETDEV_DEV(&bgx->lmac[lmac].netdev, &bgx->pdev->dev);
- 		bgx->lmac[lmac].lmacid = lmac;
---- a/drivers/net/ethernet/davicom/dm9000.c
-+++ b/drivers/net/ethernet/davicom/dm9000.c
-@@ -1388,7 +1388,7 @@ static struct dm9000_plat_data *dm9000_p
- {
- 	struct dm9000_plat_data *pdata;
- 	struct device_node *np = dev->of_node;
--	const void *mac_addr;
-+	int ret;
- 
- 	if (!IS_ENABLED(CONFIG_OF) || !np)
- 		return ERR_PTR(-ENXIO);
-@@ -1402,11 +1402,9 @@ static struct dm9000_plat_data *dm9000_p
- 	if (of_find_property(np, "davicom,no-eeprom", NULL))
- 		pdata->flags |= DM9000_PLATF_NO_EEPROM;
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(pdata->dev_addr, mac_addr);
--	else if (PTR_ERR(mac_addr) == -EPROBE_DEFER)
--		return ERR_CAST(mac_addr);
-+	ret = of_get_mac_address(np, pdata->dev_addr);
-+	if (ret == -EPROBE_DEFER)
-+		return ERR_PTR(ret);
- 
- 	return pdata;
- }
---- a/drivers/net/ethernet/ethoc.c
-+++ b/drivers/net/ethernet/ethoc.c
-@@ -1151,11 +1151,7 @@ static int ethoc_probe(struct platform_d
- 		ether_addr_copy(netdev->dev_addr, pdata->hwaddr);
- 		priv->phy_id = pdata->phy_id;
- 	} else {
--		const void *mac;
--
--		mac = of_get_mac_address(pdev->dev.of_node);
--		if (!IS_ERR(mac))
--			ether_addr_copy(netdev->dev_addr, mac);
-+		of_get_mac_address(pdev->dev.of_node, netdev->dev_addr);
- 		priv->phy_id = -1;
- 	}
- 
---- a/drivers/net/ethernet/ezchip/nps_enet.c
-+++ b/drivers/net/ethernet/ezchip/nps_enet.c
-@@ -575,7 +575,6 @@ static s32 nps_enet_probe(struct platfor
- 	struct net_device *ndev;
- 	struct nps_enet_priv *priv;
- 	s32 err = 0;
--	const char *mac_addr;
- 
- 	if (!dev->of_node)
- 		return -ENODEV;
-@@ -602,10 +601,8 @@ static s32 nps_enet_probe(struct platfor
- 	dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs_base);
- 
- 	/* set kernel MAC address to dev */
--	mac_addr = of_get_mac_address(dev->of_node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--	else
-+	err = of_get_mac_address(dev->of_node, ndev->dev_addr);
-+	if (err)
- 		eth_hw_addr_random(ndev);
- 
- 	/* Get IRQ number */
---- a/drivers/net/ethernet/freescale/fec_main.c
-+++ b/drivers/net/ethernet/freescale/fec_main.c
-@@ -1666,6 +1666,7 @@ static void fec_get_mac(struct net_devic
- 	struct fec_enet_private *fep = netdev_priv(ndev);
- 	struct fec_platform_data *pdata = dev_get_platdata(&fep->pdev->dev);
- 	unsigned char *iap, tmpaddr[ETH_ALEN];
-+	int ret;
- 
- 	/*
- 	 * try to get mac address in following order:
-@@ -1681,9 +1682,9 @@ static void fec_get_mac(struct net_devic
- 	if (!is_valid_ether_addr(iap)) {
- 		struct device_node *np = fep->pdev->dev.of_node;
- 		if (np) {
--			const char *mac = of_get_mac_address(np);
--			if (!IS_ERR(mac))
--				iap = (unsigned char *) mac;
-+			ret = of_get_mac_address(np, tmpaddr);
-+			if (!ret)
-+				iap = tmpaddr;
- 		}
- 	}
- 
---- a/drivers/net/ethernet/freescale/fec_mpc52xx.c
-+++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c
-@@ -813,7 +813,6 @@ static int mpc52xx_fec_probe(struct plat
- 	const u32 *prop;
- 	int prop_size;
- 	struct device_node *np = op->dev.of_node;
--	const char *mac_addr;
- 
- 	phys_addr_t rx_fifo;
- 	phys_addr_t tx_fifo;
-@@ -891,10 +890,8 @@ static int mpc52xx_fec_probe(struct plat
- 	 *
- 	 * First try to read MAC address from DT
- 	 */
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr)) {
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--	} else {
-+	rv = of_get_mac_address(np, ndev->dev_addr);
-+	if (rv) {
- 		struct mpc52xx_fec __iomem *fec = priv->fec;
- 
- 		/*
---- a/drivers/net/ethernet/freescale/fman/mac.c
-+++ b/drivers/net/ethernet/freescale/fman/mac.c
-@@ -616,7 +616,6 @@ static int mac_probe(struct platform_dev
- 	struct platform_device	*of_dev;
- 	struct resource		 res;
- 	struct mac_priv_s	*priv;
--	const u8		*mac_addr;
- 	u32			 val;
- 	u8			fman_id;
- 	phy_interface_t          phy_if;
-@@ -734,11 +733,9 @@ static int mac_probe(struct platform_dev
- 	priv->cell_index = (u8)val;
- 
- 	/* Get the MAC address */
--	mac_addr = of_get_mac_address(mac_node);
--	if (IS_ERR(mac_addr))
-+	err = of_get_mac_address(mac_node, mac_dev->addr);
-+	if (err)
- 		dev_warn(dev, "of_get_mac_address(%pOF) failed\n", mac_node);
--	else
--		ether_addr_copy(mac_dev->addr, mac_addr);
- 
- 	/* Get the port handles */
- 	nph = of_count_phandle_with_args(mac_node, "fsl,fman-ports", NULL);
-@@ -864,7 +861,7 @@ static int mac_probe(struct platform_dev
- 	if (err < 0)
- 		dev_err(dev, "fman_set_mac_active_pause() = %d\n", err);
- 
--	if (!IS_ERR(mac_addr))
-+	if (!is_zero_ether_addr(mac_dev->addr))
- 		dev_info(dev, "FMan MAC address: %pM\n", mac_dev->addr);
- 
- 	priv->eth_dev = dpaa_eth_add_device(fman_id, mac_dev);
---- a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
-+++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
-@@ -918,7 +918,6 @@ static int fs_enet_probe(struct platform
- 	const u32 *data;
- 	struct clk *clk;
- 	int err;
--	const u8 *mac_addr;
- 	const char *phy_connection_type;
- 	int privsize, len, ret = -ENODEV;
- 
-@@ -1006,9 +1005,7 @@ static int fs_enet_probe(struct platform
- 	spin_lock_init(&fep->lock);
- 	spin_lock_init(&fep->tx_lock);
- 
--	mac_addr = of_get_mac_address(ofdev->dev.of_node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
-+	of_get_mac_address(ofdev->dev.of_node, ndev->dev_addr);
- 
- 	ret = fep->ops->allocate_bd(ndev);
- 	if (ret)
---- a/drivers/net/ethernet/freescale/gianfar.c
-+++ b/drivers/net/ethernet/freescale/gianfar.c
-@@ -641,7 +641,6 @@ static phy_interface_t gfar_get_interfac
- static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
- {
- 	const char *model;
--	const void *mac_addr;
- 	int err = 0, i;
- 	phy_interface_t interface;
- 	struct net_device *dev = NULL;
-@@ -783,11 +782,8 @@ static int gfar_of_init(struct platform_
- 	if (stash_len || stash_idx)
- 		priv->device_flags |= FSL_GIANFAR_DEV_HAS_BUF_STASHING;
- 
--	mac_addr = of_get_mac_address(np);
--
--	if (!IS_ERR(mac_addr)) {
--		ether_addr_copy(dev->dev_addr, mac_addr);
--	} else {
-+	err = of_get_mac_address(np, dev->dev_addr);
-+	if (err) {
- 		eth_hw_addr_random(dev);
- 		dev_info(&ofdev->dev, "Using random MAC address: %pM\n", dev->dev_addr);
- 	}
---- a/drivers/net/ethernet/freescale/ucc_geth.c
-+++ b/drivers/net/ethernet/freescale/ucc_geth.c
-@@ -3696,7 +3696,6 @@ static int ucc_geth_probe(struct platfor
- 	int err, ucc_num, max_speed = 0;
- 	const unsigned int *prop;
- 	const char *sprop;
--	const void *mac_addr;
- 	phy_interface_t phy_interface;
- 	static const int enet_to_speed[] = {
- 		SPEED_10, SPEED_10, SPEED_10,
-@@ -3906,9 +3905,7 @@ static int ucc_geth_probe(struct platfor
- 		goto err_free_netdev;
- 	}
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(dev->dev_addr, mac_addr);
-+	of_get_mac_address(np, dev->dev_addr);
- 
- 	ugeth->ug_info = ug_info;
- 	ugeth->dev = device;
---- a/drivers/net/ethernet/hisilicon/hisi_femac.c
-+++ b/drivers/net/ethernet/hisilicon/hisi_femac.c
-@@ -772,7 +772,6 @@ static int hisi_femac_drv_probe(struct p
- 	struct net_device *ndev;
- 	struct hisi_femac_priv *priv;
- 	struct phy_device *phy;
--	const char *mac_addr;
- 	int ret;
- 
- 	ndev = alloc_etherdev(sizeof(*priv));
-@@ -842,10 +841,8 @@ static int hisi_femac_drv_probe(struct p
- 			   (unsigned long)phy->phy_id,
- 			   phy_modes(phy->interface));
- 
--	mac_addr = of_get_mac_address(node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--	if (!is_valid_ether_addr(ndev->dev_addr)) {
-+	ret = of_get_mac_address(node, ndev->dev_addr);
-+	if (ret) {
- 		eth_hw_addr_random(ndev);
- 		dev_warn(dev, "using random MAC address %pM\n",
- 			 ndev->dev_addr);
---- a/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c
-+++ b/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c
-@@ -1098,7 +1098,6 @@ static int hix5hd2_dev_probe(struct plat
- 	struct net_device *ndev;
- 	struct hix5hd2_priv *priv;
- 	struct mii_bus *bus;
--	const char *mac_addr;
- 	int ret;
- 
- 	ndev = alloc_etherdev(sizeof(struct hix5hd2_priv));
-@@ -1220,10 +1219,8 @@ static int hix5hd2_dev_probe(struct plat
- 		goto out_phy_node;
- 	}
- 
--	mac_addr = of_get_mac_address(node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--	if (!is_valid_ether_addr(ndev->dev_addr)) {
-+	ret = of_get_mac_address(node, ndev->dev_addr);
-+	if (ret) {
- 		eth_hw_addr_random(ndev);
- 		netdev_warn(ndev, "using random MAC address %pM\n",
- 			    ndev->dev_addr);
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -440,7 +440,6 @@ static int xrx200_probe(struct platform_
- 	struct resource *res;
- 	struct xrx200_priv *priv;
- 	struct net_device *net_dev;
--	const u8 *mac;
- 	int err;
- 
- 	/* alloc the network device */
-@@ -484,10 +483,8 @@ static int xrx200_probe(struct platform_
- 		return PTR_ERR(priv->clk);
- 	}
- 
--	mac = of_get_mac_address(np);
--	if (!IS_ERR(mac))
--		ether_addr_copy(net_dev->dev_addr, mac);
--	else
-+	err = of_get_mac_address(np, net_dev->dev_addr);
-+	if (err)
- 		eth_hw_addr_random(net_dev);
- 
- 	/* bring up the dma engine and IP core */
---- a/drivers/net/ethernet/marvell/mv643xx_eth.c
-+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
-@@ -2701,7 +2701,6 @@ static int mv643xx_eth_shared_of_add_por
- 	struct platform_device *ppdev;
- 	struct mv643xx_eth_platform_data ppd;
- 	struct resource res;
--	const char *mac_addr;
- 	int ret;
- 	int dev_num = 0;
- 
-@@ -2732,9 +2731,7 @@ static int mv643xx_eth_shared_of_add_por
- 		return -EINVAL;
- 	}
- 
--	mac_addr = of_get_mac_address(pnp);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ppd.mac_addr, mac_addr);
-+	of_get_mac_address(pnp, ppd.mac_addr);
- 
- 	mv643xx_eth_property(pnp, "tx-queue-size", ppd.tx_queue_size);
- 	mv643xx_eth_property(pnp, "tx-sram-addr", ppd.tx_sram_addr);
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -5062,7 +5062,6 @@ static int mvneta_probe(struct platform_
- 	struct net_device *dev;
- 	struct phylink *phylink;
- 	struct phy *comphy;
--	const char *dt_mac_addr;
- 	char hw_mac_addr[ETH_ALEN];
- 	phy_interface_t phy_mode;
- 	const char *mac_from;
-@@ -5158,10 +5157,9 @@ static int mvneta_probe(struct platform_
- 		goto err_free_ports;
- 	}
- 
--	dt_mac_addr = of_get_mac_address(dn);
--	if (!IS_ERR(dt_mac_addr)) {
-+	err = of_get_mac_address(dn, dev->dev_addr);
-+	if (!err) {
- 		mac_from = "device tree";
--		ether_addr_copy(dev->dev_addr, dt_mac_addr);
- 	} else {
- 		mvneta_get_mac_addr(pp, hw_mac_addr);
- 		if (is_valid_ether_addr(hw_mac_addr)) {
---- a/drivers/net/ethernet/marvell/prestera/prestera_main.c
-+++ b/drivers/net/ethernet/marvell/prestera/prestera_main.c
-@@ -466,20 +466,17 @@ static int prestera_switch_set_base_mac_
- {
- 	struct device_node *base_mac_np;
- 	struct device_node *np;
--	const char *base_mac;
-+	int ret;
- 
- 	np = of_find_compatible_node(NULL, NULL, "marvell,prestera");
- 	base_mac_np = of_parse_phandle(np, "base-mac-provider", 0);
- 
--	base_mac = of_get_mac_address(base_mac_np);
--	of_node_put(base_mac_np);
--	if (!IS_ERR(base_mac))
--		ether_addr_copy(sw->base_mac, base_mac);
--
--	if (!is_valid_ether_addr(sw->base_mac)) {
-+	ret = of_get_mac_address(base_mac_np, sw->base_mac);
-+	if (ret) {
- 		eth_random_addr(sw->base_mac);
- 		dev_info(prestera_dev(sw), "using random base mac address\n");
- 	}
-+	of_node_put(base_mac_np);
- 
- 	return prestera_hw_switch_mac_set(sw, sw->base_mac);
- }
---- a/drivers/net/ethernet/marvell/pxa168_eth.c
-+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
-@@ -1392,7 +1392,6 @@ static int pxa168_eth_probe(struct platf
- 	struct resource *res;
- 	struct clk *clk;
- 	struct device_node *np;
--	const unsigned char *mac_addr = NULL;
- 	int err;
- 
- 	printk(KERN_NOTICE "PXA168 10/100 Ethernet Driver\n");
-@@ -1435,12 +1434,8 @@ static int pxa168_eth_probe(struct platf
- 
- 	INIT_WORK(&pep->tx_timeout_task, pxa168_eth_tx_timeout_task);
- 
--	if (pdev->dev.of_node)
--		mac_addr = of_get_mac_address(pdev->dev.of_node);
--
--	if (!IS_ERR_OR_NULL(mac_addr)) {
--		ether_addr_copy(dev->dev_addr, mac_addr);
--	} else {
-+	err = of_get_mac_address(pdev->dev.of_node, dev->dev_addr);
-+	if (err) {
- 		/* try reading the mac address, if set by the bootloader */
- 		pxa168_eth_get_mac_address(dev, dev->dev_addr);
- 		if (!is_valid_ether_addr(dev->dev_addr)) {
---- a/drivers/net/ethernet/marvell/sky2.c
-+++ b/drivers/net/ethernet/marvell/sky2.c
-@@ -4725,7 +4725,7 @@ static struct net_device *sky2_init_netd
- {
- 	struct sky2_port *sky2;
- 	struct net_device *dev = alloc_etherdev(sizeof(*sky2));
--	const void *iap;
-+	int ret;
- 
- 	if (!dev)
- 		return NULL;
-@@ -4795,10 +4795,8 @@ static struct net_device *sky2_init_netd
- 	 * 1) from device tree data
- 	 * 2) from internal registers set by bootloader
- 	 */
--	iap = of_get_mac_address(hw->pdev->dev.of_node);
--	if (!IS_ERR(iap))
--		ether_addr_copy(dev->dev_addr, iap);
--	else
-+	ret = of_get_mac_address(hw->pdev->dev.of_node, dev->dev_addr);
-+	if (ret)
- 		memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8,
- 			      ETH_ALEN);
- 
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2605,14 +2605,11 @@ static int __init mtk_init(struct net_de
- {
- 	struct mtk_mac *mac = netdev_priv(dev);
- 	struct mtk_eth *eth = mac->hw;
--	const char *mac_addr;
-+	int ret;
- 
--	mac_addr = of_get_mac_address(mac->of_node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(dev->dev_addr, mac_addr);
--
--	/* If the mac address is invalid, use random mac address  */
--	if (!is_valid_ether_addr(dev->dev_addr)) {
-+	ret = of_get_mac_address(mac->of_node, dev->dev_addr);
-+	if (ret) {
-+		/* If the mac address is invalid, use random mac address */
- 		eth_hw_addr_random(dev);
- 		dev_err(eth->dev, "generated random MAC address %pM\n",
- 			dev->dev_addr);
---- a/drivers/net/ethernet/micrel/ks8851_common.c
-+++ b/drivers/net/ethernet/micrel/ks8851_common.c
-@@ -194,11 +194,10 @@ static void ks8851_read_mac_addr(struct
- static void ks8851_init_mac(struct ks8851_net *ks, struct device_node *np)
- {
- 	struct net_device *dev = ks->netdev;
--	const u8 *mac_addr;
-+	int ret;
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr)) {
--		ether_addr_copy(dev->dev_addr, mac_addr);
-+	ret = of_get_mac_address(np, dev->dev_addr);
-+	if (!ret) {
- 		ks8851_write_mac_addr(dev);
- 		return;
- 	}
---- a/drivers/net/ethernet/microchip/lan743x_main.c
-+++ b/drivers/net/ethernet/microchip/lan743x_main.c
-@@ -2831,7 +2831,6 @@ static int lan743x_pcidev_probe(struct p
- {
- 	struct lan743x_adapter *adapter = NULL;
- 	struct net_device *netdev = NULL;
--	const void *mac_addr;
- 	int ret = -ENODEV;
- 
- 	netdev = devm_alloc_etherdev(&pdev->dev,
-@@ -2848,9 +2847,7 @@ static int lan743x_pcidev_probe(struct p
- 			      NETIF_MSG_IFDOWN | NETIF_MSG_TX_QUEUED;
- 	netdev->max_mtu = LAN743X_MAX_FRAME_SIZE;
- 
--	mac_addr = of_get_mac_address(pdev->dev.of_node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(adapter->mac_address, mac_addr);
-+	of_get_mac_address(pdev->dev.of_node, adapter->mac_address);
- 
- 	ret = lan743x_pci_init(adapter, pdev);
- 	if (ret)
---- a/drivers/net/ethernet/nxp/lpc_eth.c
-+++ b/drivers/net/ethernet/nxp/lpc_eth.c
-@@ -1347,9 +1347,7 @@ static int lpc_eth_drv_probe(struct plat
- 	__lpc_get_mac(pldat, ndev->dev_addr);
- 
- 	if (!is_valid_ether_addr(ndev->dev_addr)) {
--		const char *macaddr = of_get_mac_address(np);
--		if (!IS_ERR(macaddr))
--			ether_addr_copy(ndev->dev_addr, macaddr);
-+		of_get_mac_address(np, ndev->dev_addr);
- 	}
- 	if (!is_valid_ether_addr(ndev->dev_addr))
- 		eth_hw_addr_random(ndev);
---- a/drivers/net/ethernet/qualcomm/qca_spi.c
-+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
-@@ -885,7 +885,7 @@ qca_spi_probe(struct spi_device *spi)
- 	struct net_device *qcaspi_devs = NULL;
- 	u8 legacy_mode = 0;
- 	u16 signature;
--	const char *mac;
-+	int ret;
- 
- 	if (!spi->dev.of_node) {
- 		dev_err(&spi->dev, "Missing device tree\n");
-@@ -962,12 +962,8 @@ qca_spi_probe(struct spi_device *spi)
- 
- 	spi_set_drvdata(spi, qcaspi_devs);
- 
--	mac = of_get_mac_address(spi->dev.of_node);
--
--	if (!IS_ERR(mac))
--		ether_addr_copy(qca->net_dev->dev_addr, mac);
--
--	if (!is_valid_ether_addr(qca->net_dev->dev_addr)) {
-+	ret = of_get_mac_address(spi->dev.of_node, qca->net_dev->dev_addr);
-+	if (ret) {
- 		eth_hw_addr_random(qca->net_dev);
- 		dev_info(&spi->dev, "Using random MAC address: %pM\n",
- 			 qca->net_dev->dev_addr);
---- a/drivers/net/ethernet/qualcomm/qca_uart.c
-+++ b/drivers/net/ethernet/qualcomm/qca_uart.c
-@@ -323,7 +323,6 @@ static int qca_uart_probe(struct serdev_
- {
- 	struct net_device *qcauart_dev = alloc_etherdev(sizeof(struct qcauart));
- 	struct qcauart *qca;
--	const char *mac;
- 	u32 speed = 115200;
- 	int ret;
- 
-@@ -348,12 +347,8 @@ static int qca_uart_probe(struct serdev_
- 
- 	of_property_read_u32(serdev->dev.of_node, "current-speed", &speed);
- 
--	mac = of_get_mac_address(serdev->dev.of_node);
--
--	if (!IS_ERR(mac))
--		ether_addr_copy(qca->net_dev->dev_addr, mac);
--
--	if (!is_valid_ether_addr(qca->net_dev->dev_addr)) {
-+	ret = of_get_mac_address(serdev->dev.of_node, qca->net_dev->dev_addr);
-+	if (ret) {
- 		eth_hw_addr_random(qca->net_dev);
- 		dev_info(&serdev->dev, "Using random MAC address: %pM\n",
- 			 qca->net_dev->dev_addr);
---- a/drivers/net/ethernet/renesas/ravb_main.c
-+++ b/drivers/net/ethernet/renesas/ravb_main.c
-@@ -109,11 +109,13 @@ static void ravb_set_buffer_align(struct
-  * Ethernet AVB device doesn't have ROM for MAC address.
-  * This function gets the MAC address that was used by a bootloader.
-  */
--static void ravb_read_mac_address(struct net_device *ndev, const u8 *mac)
-+static void ravb_read_mac_address(struct device_node *np,
-+				  struct net_device *ndev)
- {
--	if (!IS_ERR(mac)) {
--		ether_addr_copy(ndev->dev_addr, mac);
--	} else {
-+	int ret;
-+
-+	ret = of_get_mac_address(np, ndev->dev_addr);
-+	if (ret) {
- 		u32 mahr = ravb_read(ndev, MAHR);
- 		u32 malr = ravb_read(ndev, MALR);
- 
-@@ -2189,7 +2191,7 @@ static int ravb_probe(struct platform_de
- 	priv->msg_enable = RAVB_DEF_MSG_ENABLE;
- 
- 	/* Read and set MAC address */
--	ravb_read_mac_address(ndev, of_get_mac_address(np));
-+	ravb_read_mac_address(np, ndev);
- 	if (!is_valid_ether_addr(ndev->dev_addr)) {
- 		dev_warn(&pdev->dev,
- 			 "no valid MAC address supplied, using a random one\n");
---- a/drivers/net/ethernet/renesas/sh_eth.c
-+++ b/drivers/net/ethernet/renesas/sh_eth.c
-@@ -3145,7 +3145,6 @@ static struct sh_eth_plat_data *sh_eth_p
- 	struct device_node *np = dev->of_node;
- 	struct sh_eth_plat_data *pdata;
- 	phy_interface_t interface;
--	const char *mac_addr;
- 	int ret;
- 
- 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
-@@ -3157,9 +3156,7 @@ static struct sh_eth_plat_data *sh_eth_p
- 		return NULL;
- 	pdata->phy_interface = interface;
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(pdata->mac_addr, mac_addr);
-+	of_get_mac_address(np, pdata->mac_addr);
- 
- 	pdata->no_ether_link =
- 		of_property_read_bool(np, "renesas,no-ether-link");
---- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
-+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c
-@@ -25,8 +25,7 @@
- 
- #ifdef CONFIG_OF
- static int sxgbe_probe_config_dt(struct platform_device *pdev,
--				 struct sxgbe_plat_data *plat,
--				 const char **mac)
-+				 struct sxgbe_plat_data *plat)
- {
- 	struct device_node *np = pdev->dev.of_node;
- 	struct sxgbe_dma_cfg *dma_cfg;
-@@ -35,7 +34,6 @@ static int sxgbe_probe_config_dt(struct
- 	if (!np)
- 		return -ENODEV;
- 
--	*mac = of_get_mac_address(np);
- 	err = of_get_phy_mode(np, &plat->interface);
- 	if (err && err != -ENODEV)
- 		return err;
-@@ -63,8 +61,7 @@ static int sxgbe_probe_config_dt(struct
- }
- #else
- static int sxgbe_probe_config_dt(struct platform_device *pdev,
--				 struct sxgbe_plat_data *plat,
--				 const char **mac)
-+				 struct sxgbe_plat_data *plat)
- {
- 	return -ENOSYS;
- }
-@@ -85,7 +82,6 @@ static int sxgbe_platform_probe(struct p
- 	void __iomem *addr;
- 	struct sxgbe_priv_data *priv = NULL;
- 	struct sxgbe_plat_data *plat_dat = NULL;
--	const char *mac = NULL;
- 	struct net_device *ndev = platform_get_drvdata(pdev);
- 	struct device_node *node = dev->of_node;
- 
-@@ -101,7 +97,7 @@ static int sxgbe_platform_probe(struct p
- 		if (!plat_dat)
- 			return  -ENOMEM;
- 
--		ret = sxgbe_probe_config_dt(pdev, plat_dat, &mac);
-+		ret = sxgbe_probe_config_dt(pdev, plat_dat);
- 		if (ret) {
- 			pr_err("%s: main dt probe failed\n", __func__);
- 			return ret;
-@@ -122,8 +118,7 @@ static int sxgbe_platform_probe(struct p
- 	}
- 
- 	/* Get MAC address if available (DT) */
--	if (!IS_ERR_OR_NULL(mac))
--		ether_addr_copy(priv->dev->dev_addr, mac);
-+	of_get_mac_address(node, priv->dev->dev_addr);
- 
- 	/* Get the TX/RX IRQ numbers */
- 	for (i = 0, chan = 1; i < SXGBE_TX_QUEUES; i++) {
---- a/drivers/net/ethernet/socionext/sni_ave.c
-+++ b/drivers/net/ethernet/socionext/sni_ave.c
-@@ -1559,7 +1559,6 @@ static int ave_probe(struct platform_dev
- 	struct ave_private *priv;
- 	struct net_device *ndev;
- 	struct device_node *np;
--	const void *mac_addr;
- 	void __iomem *base;
- 	const char *name;
- 	int i, irq, ret;
-@@ -1600,12 +1599,9 @@ static int ave_probe(struct platform_dev
- 
- 	ndev->max_mtu = AVE_MAX_ETHFRAME - (ETH_HLEN + ETH_FCS_LEN);
- 
--	mac_addr = of_get_mac_address(np);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(ndev->dev_addr, mac_addr);
--
--	/* if the mac address is invalid, use random mac address */
--	if (!is_valid_ether_addr(ndev->dev_addr)) {
-+	ret = of_get_mac_address(np, ndev->dev_addr);
-+	if (ret) {
-+		/* if the mac address is invalid, use random mac address */
- 		eth_hw_addr_random(ndev);
- 		dev_warn(dev, "Using random MAC address: %pM\n",
- 			 ndev->dev_addr);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
-@@ -115,7 +115,7 @@ static int anarion_dwmac_probe(struct pl
- 	if (IS_ERR(gmac))
- 		return PTR_ERR(gmac);
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
-@@ -445,7 +445,7 @@ static int dwc_eth_dwmac_probe(struct pl
- 	if (IS_ERR(stmmac_res.addr))
- 		return PTR_ERR(stmmac_res.addr);
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
-@@ -27,7 +27,7 @@ static int dwmac_generic_probe(struct pl
- 		return ret;
- 
- 	if (pdev->dev.of_node) {
--		plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+		plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 		if (IS_ERR(plat_dat)) {
- 			dev_err(&pdev->dev, "dt configuration failed\n");
- 			return PTR_ERR(plat_dat);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
-@@ -226,7 +226,7 @@ static int imx_dwmac_probe(struct platfo
- 	if (!dwmac)
- 		return -ENOMEM;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
-@@ -88,7 +88,7 @@ static int intel_eth_plat_probe(struct p
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat)) {
- 		dev_err(&pdev->dev, "dt configuration failed\n");
- 		return PTR_ERR(plat_dat);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
-@@ -255,7 +255,7 @@ static int ipq806x_gmac_probe(struct pla
- 	if (val)
- 		return val;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c
-@@ -37,7 +37,7 @@ static int lpc18xx_dwmac_probe(struct pl
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
-@@ -407,7 +407,7 @@ static int mediatek_dwmac_probe(struct p
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
-@@ -52,7 +52,7 @@ static int meson6_dwmac_probe(struct pla
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
-@@ -370,7 +370,7 @@ static int meson8b_dwmac_probe(struct pl
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
-@@ -118,7 +118,7 @@ static int oxnas_dwmac_probe(struct plat
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
-@@ -461,7 +461,7 @@ static int qcom_ethqos_probe(struct plat
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat)) {
- 		dev_err(&pdev->dev, "dt configuration failed\n");
- 		return PTR_ERR(plat_dat);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
-@@ -1392,7 +1392,7 @@ static int rk_gmac_probe(struct platform
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
-@@ -397,7 +397,7 @@ static int socfpga_dwmac_probe(struct pl
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
-@@ -325,7 +325,7 @@ static int sti_dwmac_probe(struct platfo
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
-@@ -371,7 +371,7 @@ static int stm32_dwmac_probe(struct plat
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
-@@ -1203,7 +1203,7 @@ static int sun8i_dwmac_probe(struct plat
- 	if (ret)
- 		return -EINVAL;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
-@@ -108,7 +108,7 @@ static int sun7i_gmac_probe(struct platf
- 	if (ret)
- 		return ret;
- 
--	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
- 	if (IS_ERR(plat_dat))
- 		return PTR_ERR(plat_dat);
- 
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-@@ -25,7 +25,7 @@
- 
- struct stmmac_resources {
- 	void __iomem *addr;
--	const char *mac;
-+	u8 mac[ETH_ALEN];
- 	int wol_irq;
- 	int lpi_irq;
- 	int irq;
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -5019,7 +5019,7 @@ int stmmac_dvr_probe(struct device *devi
- 	priv->wol_irq = res->wol_irq;
- 	priv->lpi_irq = res->lpi_irq;
- 
--	if (!IS_ERR_OR_NULL(res->mac))
-+	if (!is_zero_ether_addr(res->mac))
- 		memcpy(priv->dev->dev_addr, res->mac, ETH_ALEN);
- 
- 	dev_set_drvdata(device, priv->dev);
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-@@ -395,7 +395,7 @@ static int stmmac_of_get_mac_mode(struct
-  * set some private fields that will be used by the main at runtime.
-  */
- struct plat_stmmacenet_data *
--stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
-+stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
- {
- 	struct device_node *np = pdev->dev.of_node;
- 	struct plat_stmmacenet_data *plat;
-@@ -407,12 +407,12 @@ stmmac_probe_config_dt(struct platform_d
- 	if (!plat)
- 		return ERR_PTR(-ENOMEM);
- 
--	*mac = of_get_mac_address(np);
--	if (IS_ERR(*mac)) {
--		if (PTR_ERR(*mac) == -EPROBE_DEFER)
--			return ERR_CAST(*mac);
-+	rc = of_get_mac_address(np, mac);
-+	if (rc) {
-+		if (rc == -EPROBE_DEFER)
-+			return ERR_PTR(rc);
- 
--		*mac = NULL;
-+		eth_zero_addr(mac);
- 	}
- 
- 	phy_mode = device_get_phy_mode(&pdev->dev);
-@@ -643,7 +643,7 @@ void stmmac_remove_config_dt(struct plat
- }
- #else
- struct plat_stmmacenet_data *
--stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
-+stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
- {
- 	return ERR_PTR(-EINVAL);
- }
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
-@@ -12,7 +12,7 @@
- #include "stmmac.h"
- 
- struct plat_stmmacenet_data *
--stmmac_probe_config_dt(struct platform_device *pdev, const char **mac);
-+stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac);
- void stmmac_remove_config_dt(struct platform_device *pdev,
- 			     struct plat_stmmacenet_data *plat);
- 
---- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
-+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
-@@ -1713,7 +1713,6 @@ static int am65_cpsw_nuss_init_slave_por
- 
- 	for_each_child_of_node(node, port_np) {
- 		struct am65_cpsw_port *port;
--		const void *mac_addr;
- 		u32 port_id;
- 
- 		/* it is not a slave port node, continue */
-@@ -1796,15 +1795,15 @@ static int am65_cpsw_nuss_init_slave_por
- 			goto of_node_put;
- 		}
- 
--		mac_addr = of_get_mac_address(port_np);
--		if (!IS_ERR(mac_addr)) {
--			ether_addr_copy(port->slave.mac_addr, mac_addr);
--		} else if (am65_cpsw_am654_get_efuse_macid(port_np,
--							   port->port_id,
--							   port->slave.mac_addr) ||
--			   !is_valid_ether_addr(port->slave.mac_addr)) {
--			random_ether_addr(port->slave.mac_addr);
--			dev_err(dev, "Use random MAC address\n");
-+		ret = of_get_mac_address(port_np, port->slave.mac_addr);
-+		if (ret) {
-+			am65_cpsw_am654_get_efuse_macid(port_np,
-+							port->port_id,
-+							port->slave.mac_addr);
-+			if (!is_valid_ether_addr(port->slave.mac_addr)) {
-+				random_ether_addr(port->slave.mac_addr);
-+				dev_err(dev, "Use random MAC address\n");
-+			}
- 		}
- 	}
- 	of_node_put(node);
---- a/drivers/net/ethernet/ti/cpsw.c
-+++ b/drivers/net/ethernet/ti/cpsw.c
-@@ -1308,7 +1308,6 @@ static int cpsw_probe_dt(struct cpsw_pla
- 
- 	for_each_available_child_of_node(node, slave_node) {
- 		struct cpsw_slave_data *slave_data = data->slave_data + i;
--		const void *mac_addr = NULL;
- 		int lenp;
- 		const __be32 *parp;
- 
-@@ -1380,10 +1379,8 @@ static int cpsw_probe_dt(struct cpsw_pla
- 		}
- 
- no_phy_slave:
--		mac_addr = of_get_mac_address(slave_node);
--		if (!IS_ERR(mac_addr)) {
--			ether_addr_copy(slave_data->mac_addr, mac_addr);
--		} else {
-+		ret = of_get_mac_address(slave_node, slave_data->mac_addr);
-+		if (ret) {
- 			ret = ti_cm_get_macid(&pdev->dev, i,
- 					      slave_data->mac_addr);
- 			if (ret)
---- a/drivers/net/ethernet/ti/cpsw_new.c
-+++ b/drivers/net/ethernet/ti/cpsw_new.c
-@@ -1269,7 +1269,6 @@ static int cpsw_probe_dt(struct cpsw_com
- 
- 	for_each_child_of_node(tmp_node, port_np) {
- 		struct cpsw_slave_data *slave_data;
--		const void *mac_addr;
- 		u32 port_id;
- 
- 		ret = of_property_read_u32(port_np, "reg", &port_id);
-@@ -1328,10 +1327,8 @@ static int cpsw_probe_dt(struct cpsw_com
- 			goto err_node_put;
- 		}
- 
--		mac_addr = of_get_mac_address(port_np);
--		if (!IS_ERR(mac_addr)) {
--			ether_addr_copy(slave_data->mac_addr, mac_addr);
--		} else {
-+		ret = of_get_mac_address(port_np, slave_data->mac_addr);
-+		if (ret) {
- 			ret = ti_cm_get_macid(dev, port_id - 1,
- 					      slave_data->mac_addr);
- 			if (ret)
---- a/drivers/net/ethernet/ti/davinci_emac.c
-+++ b/drivers/net/ethernet/ti/davinci_emac.c
-@@ -1699,7 +1699,6 @@ davinci_emac_of_get_pdata(struct platfor
- 	const struct of_device_id *match;
- 	const struct emac_platform_data *auxdata;
- 	struct emac_platform_data *pdata = NULL;
--	const u8 *mac_addr;
- 
- 	if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
- 		return dev_get_platdata(&pdev->dev);
-@@ -1711,11 +1710,8 @@ davinci_emac_of_get_pdata(struct platfor
- 	np = pdev->dev.of_node;
- 	pdata->version = EMAC_VERSION_2;
- 
--	if (!is_valid_ether_addr(pdata->mac_addr)) {
--		mac_addr = of_get_mac_address(np);
--		if (!IS_ERR(mac_addr))
--			ether_addr_copy(pdata->mac_addr, mac_addr);
--	}
-+	if (!is_valid_ether_addr(pdata->mac_addr))
-+		of_get_mac_address(np, pdata->mac_addr);
- 
- 	of_property_read_u32(np, "ti,davinci-ctrl-reg-offset",
- 			     &pdata->ctrl_reg_offset);
---- a/drivers/net/ethernet/ti/netcp_core.c
-+++ b/drivers/net/ethernet/ti/netcp_core.c
-@@ -1966,7 +1966,6 @@ static int netcp_create_interface(struct
- 	struct resource res;
- 	void __iomem *efuse = NULL;
- 	u32 efuse_mac = 0;
--	const void *mac_addr;
- 	u8 efuse_mac_addr[6];
- 	u32 temp[2];
- 	int ret = 0;
-@@ -2036,10 +2035,8 @@ static int netcp_create_interface(struct
- 		devm_iounmap(dev, efuse);
- 		devm_release_mem_region(dev, res.start, size);
- 	} else {
--		mac_addr = of_get_mac_address(node_interface);
--		if (!IS_ERR(mac_addr))
--			ether_addr_copy(ndev->dev_addr, mac_addr);
--		else
-+		ret = of_get_mac_address(node_interface, ndev->dev_addr);
-+		if (ret)
- 			eth_random_addr(ndev->dev_addr);
- 	}
- 
---- a/drivers/net/ethernet/wiznet/w5100-spi.c
-+++ b/drivers/net/ethernet/wiznet/w5100-spi.c
-@@ -423,8 +423,14 @@ static int w5100_spi_probe(struct spi_de
- 	const struct of_device_id *of_id;
- 	const struct w5100_ops *ops;
- 	kernel_ulong_t driver_data;
-+	const void *mac = NULL;
-+	u8 tmpmac[ETH_ALEN];
- 	int priv_size;
--	const void *mac = of_get_mac_address(spi->dev.of_node);
-+	int ret;
-+
-+	ret = of_get_mac_address(spi->dev.of_node, tmpmac);
-+	if (!ret)
-+		mac = tmpmac;
- 
- 	if (spi->dev.of_node) {
- 		of_id = of_match_device(w5100_of_match, &spi->dev);
---- a/drivers/net/ethernet/wiznet/w5100.c
-+++ b/drivers/net/ethernet/wiznet/w5100.c
-@@ -1159,7 +1159,7 @@ int w5100_probe(struct device *dev, cons
- 	INIT_WORK(&priv->setrx_work, w5100_setrx_work);
- 	INIT_WORK(&priv->restart_work, w5100_restart_work);
- 
--	if (!IS_ERR_OR_NULL(mac_addr))
-+	if (mac_addr)
- 		memcpy(ndev->dev_addr, mac_addr, ETH_ALEN);
- 	else
- 		eth_hw_addr_random(ndev);
---- a/drivers/net/ethernet/xilinx/ll_temac_main.c
-+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
-@@ -438,7 +438,7 @@ static void temac_do_set_mac_address(str
- 
- static int temac_init_mac_address(struct net_device *ndev, const void *address)
- {
--	ether_addr_copy(ndev->dev_addr, address);
-+	memcpy(ndev->dev_addr, address, ETH_ALEN);
- 	if (!is_valid_ether_addr(ndev->dev_addr))
- 		eth_hw_addr_random(ndev);
- 	temac_do_set_mac_address(ndev);
-@@ -1370,7 +1370,7 @@ static int temac_probe(struct platform_d
- 	struct device_node *temac_np = dev_of_node(&pdev->dev), *dma_np;
- 	struct temac_local *lp;
- 	struct net_device *ndev;
--	const void *addr;
-+	u8 addr[ETH_ALEN];
- 	__be32 *p;
- 	bool little_endian;
- 	int rc = 0;
-@@ -1563,8 +1563,8 @@ static int temac_probe(struct platform_d
- 
- 	if (temac_np) {
- 		/* Retrieve the MAC address */
--		addr = of_get_mac_address(temac_np);
--		if (IS_ERR(addr)) {
-+		rc = of_get_mac_address(temac_np, addr);
-+		if (rc) {
- 			dev_err(&pdev->dev, "could not find MAC address\n");
- 			return -ENODEV;
- 		}
---- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
-+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
-@@ -1843,8 +1843,8 @@ static int axienet_probe(struct platform
- 	struct device_node *np;
- 	struct axienet_local *lp;
- 	struct net_device *ndev;
--	const void *mac_addr;
- 	struct resource *ethres;
-+	u8 mac_addr[ETH_ALEN];
- 	int addr_width = 32;
- 	u32 value;
- 
-@@ -2044,13 +2044,14 @@ static int axienet_probe(struct platform
- 		dev_info(&pdev->dev, "Ethernet core IRQ not defined\n");
- 
- 	/* Retrieve the MAC address */
--	mac_addr = of_get_mac_address(pdev->dev.of_node);
--	if (IS_ERR(mac_addr)) {
--		dev_warn(&pdev->dev, "could not find MAC address property: %ld\n",
--			 PTR_ERR(mac_addr));
--		mac_addr = NULL;
-+	ret = of_get_mac_address(pdev->dev.of_node, mac_addr);
-+	if (!ret) {
-+		axienet_set_mac_address(ndev, mac_addr);
-+	} else {
-+		dev_warn(&pdev->dev, "could not find MAC address property: %d\n",
-+			 ret);
-+		axienet_set_mac_address(ndev, NULL);
- 	}
--	axienet_set_mac_address(ndev, mac_addr);
- 
- 	lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
- 	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
---- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-@@ -1107,7 +1107,6 @@ static int xemaclite_of_probe(struct pla
- 	struct net_device *ndev = NULL;
- 	struct net_local *lp = NULL;
- 	struct device *dev = &ofdev->dev;
--	const void *mac_address;
- 
- 	int rc = 0;
- 
-@@ -1149,12 +1148,9 @@ static int xemaclite_of_probe(struct pla
- 	lp->next_rx_buf_to_use = 0x0;
- 	lp->tx_ping_pong = get_bool(ofdev, "xlnx,tx-ping-pong");
- 	lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong");
--	mac_address = of_get_mac_address(ofdev->dev.of_node);
- 
--	if (!IS_ERR(mac_address)) {
--		/* Set the MAC address. */
--		ether_addr_copy(ndev->dev_addr, mac_address);
--	} else {
-+	rc = of_get_mac_address(ofdev->dev.of_node, ndev->dev_addr);
-+	if (rc) {
- 		dev_warn(dev, "No MAC address found, using random\n");
- 		eth_hw_addr_random(ndev);
- 	}
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -618,7 +618,6 @@ static int ath9k_of_init(struct ath_soft
- 	struct ath_hw *ah = sc->sc_ah;
- 	struct ath_common *common = ath9k_hw_common(ah);
- 	enum ath_bus_type bus_type = common->bus_ops->ath_bus_type;
--	const char *mac;
- 	char eeprom_name[100];
- 	int ret;
- 
-@@ -641,9 +640,7 @@ static int ath9k_of_init(struct ath_soft
- 		ah->ah_flags |= AH_NO_EEP_SWAP;
- 	}
- 
--	mac = of_get_mac_address(np);
--	if (!IS_ERR(mac))
--		ether_addr_copy(common->macaddr, mac);
-+	of_get_mac_address(np, common->macaddr);
- 
- 	return 0;
- }
---- a/drivers/net/wireless/mediatek/mt76/eeprom.c
-+++ b/drivers/net/wireless/mediatek/mt76/eeprom.c
-@@ -90,15 +90,9 @@ out_put_node:
- void
- mt76_eeprom_override(struct mt76_dev *dev)
- {
--#ifdef CONFIG_OF
- 	struct device_node *np = dev->dev->of_node;
--	const u8 *mac = NULL;
- 
--	if (np)
--		mac = of_get_mac_address(np);
--	if (!IS_ERR_OR_NULL(mac))
--		ether_addr_copy(dev->macaddr, mac);
--#endif
-+	of_get_mac_address(np, dev->macaddr);
- 
- 	if (!is_valid_ether_addr(dev->macaddr)) {
- 		eth_random_addr(dev->macaddr);
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -990,11 +990,7 @@ static void rt2x00lib_rate(struct ieee80
- 
- void rt2x00lib_set_mac_address(struct rt2x00_dev *rt2x00dev, u8 *eeprom_mac_addr)
- {
--	const char *mac_addr;
--
--	mac_addr = of_get_mac_address(rt2x00dev->dev->of_node);
--	if (!IS_ERR(mac_addr))
--		ether_addr_copy(eeprom_mac_addr, mac_addr);
-+	of_get_mac_address(rt2x00dev->dev->of_node, eeprom_mac_addr);
- 
- 	if (!is_valid_ether_addr(eeprom_mac_addr)) {
- 		eth_random_addr(eeprom_mac_addr);
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -45,37 +45,29 @@ int of_get_phy_mode(struct device_node *
- }
- EXPORT_SYMBOL_GPL(of_get_phy_mode);
- 
--static const void *of_get_mac_addr(struct device_node *np, const char *name)
-+static int of_get_mac_addr(struct device_node *np, const char *name, u8 *addr)
- {
- 	struct property *pp = of_find_property(np, name, NULL);
- 
--	if (pp && pp->length == ETH_ALEN && is_valid_ether_addr(pp->value))
--		return pp->value;
--	return NULL;
-+	if (pp && pp->length == ETH_ALEN && is_valid_ether_addr(pp->value)) {
-+		memcpy(addr, pp->value, ETH_ALEN);
-+		return 0;
-+	}
-+	return -ENODEV;
- }
- 
--static const void *of_get_mac_addr_nvmem(struct device_node *np)
-+static int of_get_mac_addr_nvmem(struct device_node *np, u8 *addr)
- {
--	int ret;
--	const void *mac;
--	u8 nvmem_mac[ETH_ALEN];
- 	struct platform_device *pdev = of_find_device_by_node(np);
-+	int ret;
- 
- 	if (!pdev)
--		return ERR_PTR(-ENODEV);
-+		return -ENODEV;
- 
--	ret = nvmem_get_mac_address(&pdev->dev, &nvmem_mac);
--	if (ret) {
--		put_device(&pdev->dev);
--		return ERR_PTR(ret);
--	}
--
--	mac = devm_kmemdup(&pdev->dev, nvmem_mac, ETH_ALEN, GFP_KERNEL);
-+	ret = nvmem_get_mac_address(&pdev->dev, addr);
- 	put_device(&pdev->dev);
--	if (!mac)
--		return ERR_PTR(-ENOMEM);
- 
--	return mac;
-+	return ret;
- }
- 
- /**
-@@ -98,24 +90,27 @@ static const void *of_get_mac_addr_nvmem
-  * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
-  * but is all zeros.
-  *
-- * Return: Will be a valid pointer on success and ERR_PTR in case of error.
-+ * Return: 0 on success and errno in case of error.
- */
--const void *of_get_mac_address(struct device_node *np)
-+int of_get_mac_address(struct device_node *np, u8 *addr)
- {
--	const void *addr;
--
--	addr = of_get_mac_addr(np, "mac-address");
--	if (addr)
--		return addr;
-+	int ret;
- 
--	addr = of_get_mac_addr(np, "local-mac-address");
--	if (addr)
--		return addr;
-+	if (!np)
-+		return -ENODEV;
- 
--	addr = of_get_mac_addr(np, "address");
--	if (addr)
--		return addr;
-+	ret = of_get_mac_addr(np, "mac-address", addr);
-+	if (!ret)
-+		return 0;
-+
-+	ret = of_get_mac_addr(np, "local-mac-address", addr);
-+	if (!ret)
-+		return 0;
-+
-+	ret = of_get_mac_addr(np, "address", addr);
-+	if (!ret)
-+		return 0;
- 
--	return of_get_mac_addr_nvmem(np);
-+	return of_get_mac_addr_nvmem(np, addr);
- }
- EXPORT_SYMBOL(of_get_mac_address);
---- a/drivers/staging/octeon/ethernet.c
-+++ b/drivers/staging/octeon/ethernet.c
-@@ -407,14 +407,10 @@ static int cvm_oct_common_set_mac_addres
- int cvm_oct_common_init(struct net_device *dev)
- {
- 	struct octeon_ethernet *priv = netdev_priv(dev);
--	const u8 *mac = NULL;
-+	int ret;
- 
--	if (priv->of_node)
--		mac = of_get_mac_address(priv->of_node);
--
--	if (!IS_ERR_OR_NULL(mac))
--		ether_addr_copy(dev->dev_addr, mac);
--	else
-+	ret = of_get_mac_address(priv->of_node, dev->dev_addr);
-+	if (ret)
- 		eth_hw_addr_random(dev);
- 
- 	/*
---- a/drivers/staging/wfx/main.c
-+++ b/drivers/staging/wfx/main.c
-@@ -339,7 +339,6 @@ int wfx_probe(struct wfx_dev *wdev)
- {
- 	int i;
- 	int err;
--	const void *macaddr;
- 	struct gpio_desc *gpio_saved;
- 
- 	// During first part of boot, gpio_wakeup cannot yet been used. So
-@@ -428,9 +427,9 @@ int wfx_probe(struct wfx_dev *wdev)
- 
- 	for (i = 0; i < ARRAY_SIZE(wdev->addresses); i++) {
- 		eth_zero_addr(wdev->addresses[i].addr);
--		macaddr = of_get_mac_address(wdev->dev->of_node);
--		if (!IS_ERR_OR_NULL(macaddr)) {
--			ether_addr_copy(wdev->addresses[i].addr, macaddr);
-+		err = of_get_mac_address(wdev->dev->of_node,
-+					 wdev->addresses[i].addr);
-+		if (!err) {
- 			wdev->addresses[i].addr[ETH_ALEN - 1] += i;
- 		} else {
- 			ether_addr_copy(wdev->addresses[i].addr,
---- a/include/linux/of_net.h
-+++ b/include/linux/of_net.h
-@@ -13,7 +13,7 @@
- 
- struct net_device;
- extern int of_get_phy_mode(struct device_node *np, phy_interface_t *interface);
--extern const void *of_get_mac_address(struct device_node *np);
-+extern int of_get_mac_address(struct device_node *np, u8 *mac);
- extern struct net_device *of_find_net_device_by_node(struct device_node *np);
- #else
- static inline int of_get_phy_mode(struct device_node *np,
-@@ -22,9 +22,9 @@ static inline int of_get_phy_mode(struct
- 	return -ENODEV;
- }
- 
--static inline const void *of_get_mac_address(struct device_node *np)
-+static inline int of_get_mac_address(struct device_node *np, u8 *mac)
- {
--	return ERR_PTR(-ENODEV);
-+	return -ENODEV;
- }
- 
- static inline struct net_device *of_find_net_device_by_node(struct device_node *np)
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -208,7 +208,7 @@ struct dsa_port {
- 	unsigned int		index;
- 	const char		*name;
- 	struct dsa_port		*cpu_dp;
--	const char		*mac;
-+	u8			mac[ETH_ALEN];
- 	struct device_node	*dn;
- 	unsigned int		ageing_time;
- 	bool			vlan_filtering;
---- a/net/dsa/dsa2.c
-+++ b/net/dsa/dsa2.c
-@@ -288,7 +288,7 @@ static int dsa_port_setup(struct dsa_por
- 
- 		break;
- 	case DSA_PORT_TYPE_USER:
--		dp->mac = of_get_mac_address(dp->dn);
-+		of_get_mac_address(dp->dn, dp->mac);
- 		err = dsa_slave_create(dp);
- 		if (err)
- 			break;
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1855,7 +1855,7 @@ int dsa_slave_create(struct dsa_port *po
- 	slave_dev->hw_features |= NETIF_F_HW_TC;
- 	slave_dev->features |= NETIF_F_LLTX;
- 	slave_dev->ethtool_ops = &dsa_slave_ethtool_ops;
--	if (!IS_ERR_OR_NULL(port->mac))
-+	if (!is_zero_ether_addr(port->mac))
- 		ether_addr_copy(slave_dev->dev_addr, port->mac);
- 	else
- 		eth_hw_addr_inherit(slave_dev, master);
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -506,13 +506,14 @@ unsigned char * __weak arch_get_platform
- 
- int eth_platform_get_mac_address(struct device *dev, u8 *mac_addr)
- {
--	const unsigned char *addr = NULL;
-+	unsigned char *addr;
-+	int ret;
- 
--	if (dev->of_node)
--		addr = of_get_mac_address(dev->of_node);
--	if (IS_ERR_OR_NULL(addr))
--		addr = arch_get_platform_mac_address();
-+	ret = of_get_mac_address(dev->of_node, mac_addr);
-+	if (!ret)
-+		return 0;
- 
-+	addr = arch_get_platform_mac_address();
- 	if (!addr)
- 		return -ENODEV;
- 
diff --git a/target/linux/generic/backport-5.10/732-v5.13-0009-of-net-fix-of_get_mac_addr_nvmem-for-non-platform-de.patch b/target/linux/generic/backport-5.10/732-v5.13-0009-of-net-fix-of_get_mac_addr_nvmem-for-non-platform-de.patch
deleted file mode 100644
index 260a3258bb42..000000000000
--- a/target/linux/generic/backport-5.10/732-v5.13-0009-of-net-fix-of_get_mac_addr_nvmem-for-non-platform-de.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From f10843e04a075202dbb39dfcee047e3a2fdf5a8d Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 12 Apr 2021 19:47:18 +0200
-Subject: [PATCH] of: net: fix of_get_mac_addr_nvmem() for non-platform devices
-
-of_get_mac_address() already supports fetching the MAC address by an
-nvmem provider. But until now, it was just working for platform devices.
-Esp. it was not working for DSA ports and PCI devices. It gets more
-common that PCI devices have a device tree binding since SoCs contain
-integrated root complexes.
-
-Use the nvmem of_* binding to fetch the nvmem cells by a struct
-device_node. We still have to try to read the cell by device first
-because there might be a nvmem_cell_lookup associated with that device.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/of/of_net.c | 35 ++++++++++++++++++++++++++++++-----
- 1 file changed, 30 insertions(+), 5 deletions(-)
-
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -11,6 +11,7 @@
- #include <linux/phy.h>
- #include <linux/export.h>
- #include <linux/device.h>
-+#include <linux/nvmem-consumer.h>
- 
- /**
-  * of_get_phy_mode - Get phy mode for given device_node
-@@ -59,15 +60,39 @@ static int of_get_mac_addr(struct device
- static int of_get_mac_addr_nvmem(struct device_node *np, u8 *addr)
- {
- 	struct platform_device *pdev = of_find_device_by_node(np);
-+	struct nvmem_cell *cell;
-+	const void *mac;
-+	size_t len;
- 	int ret;
- 
--	if (!pdev)
--		return -ENODEV;
-+	/* Try lookup by device first, there might be a nvmem_cell_lookup
-+	 * associated with a given device.
-+	 */
-+	if (pdev) {
-+		ret = nvmem_get_mac_address(&pdev->dev, addr);
-+		put_device(&pdev->dev);
-+		return ret;
-+	}
-+
-+	cell = of_nvmem_cell_get(np, "mac-address");
-+	if (IS_ERR(cell))
-+		return PTR_ERR(cell);
-+
-+	mac = nvmem_cell_read(cell, &len);
-+	nvmem_cell_put(cell);
-+
-+	if (IS_ERR(mac))
-+		return PTR_ERR(mac);
-+
-+	if (len != ETH_ALEN || !is_valid_ether_addr(mac)) {
-+		kfree(mac);
-+		return -EINVAL;
-+	}
- 
--	ret = nvmem_get_mac_address(&pdev->dev, addr);
--	put_device(&pdev->dev);
-+	memcpy(addr, mac, ETH_ALEN);
-+	kfree(mac);
- 
--	return ret;
-+	return 0;
- }
- 
- /**
diff --git a/target/linux/generic/backport-5.10/733-v5.15-0001-net-bgmac-bcma-handle-deferred-probe-error-due-to-ma.patch b/target/linux/generic/backport-5.10/733-v5.15-0001-net-bgmac-bcma-handle-deferred-probe-error-due-to-ma.patch
deleted file mode 100644
index 6e7f20634f5a..000000000000
--- a/target/linux/generic/backport-5.10/733-v5.15-0001-net-bgmac-bcma-handle-deferred-probe-error-due-to-ma.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 029497e66bdc762e001880e4c85a91f35a54b1e2 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 19 Sep 2021 13:57:25 +0200
-Subject: [PATCH] net: bgmac-bcma: handle deferred probe error due to
- mac-address
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Due to the inclusion of nvmem handling into the mac-address getter
-function of_get_mac_address() by
-commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address")
-it is now possible to get a -EPROBE_DEFER return code. Which did cause
-bgmac to assign a random ethernet address.
-
-This exact issue happened on my Meraki MR32. The nvmem provider is
-an EEPROM (at24c64) which gets instantiated once the module
-driver is loaded... This happens once the filesystem becomes available.
-
-With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error.
-Then the driver subsystem will reschedule the probe at a later time.
-
-Cc: Petr Å tetiar <ynezz@true.cz>
-Cc: Michael Walle <michael@walle.cc>
-Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address")
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bgmac-bcma.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -129,6 +129,8 @@ static int bgmac_probe(struct bcma_devic
- 	bcma_set_drvdata(core, bgmac);
- 
- 	err = of_get_mac_address(bgmac->dev->of_node, bgmac->net_dev->dev_addr);
-+	if (err == -EPROBE_DEFER)
-+		return err;
- 
- 	/* If no MAC address assigned via device tree, check SPROM */
- 	if (err) {
diff --git a/target/linux/generic/backport-5.10/733-v5.15-0002-net-bgmac-platform-handle-mac-address-deferral.patch b/target/linux/generic/backport-5.10/733-v5.15-0002-net-bgmac-platform-handle-mac-address-deferral.patch
deleted file mode 100644
index bde62f3b1b8c..000000000000
--- a/target/linux/generic/backport-5.10/733-v5.15-0002-net-bgmac-platform-handle-mac-address-deferral.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 763716a55cb1f480ffe1a9702e6b5d9ea1a80a24 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Sat, 25 Sep 2021 11:36:27 +0000
-Subject: [PATCH] net: bgmac-platform: handle mac-address deferral
-
-This patch is a replication of Christian Lamparter's "net: bgmac-bcma:
-handle deferred probe error due to mac-address" patch for the
-bgmac-platform driver [1].
-
-As is the case with the bgmac-bcma driver, this change is to cover the
-scenario where the MAC address cannot yet be discovered due to reliance
-on an nvmem provider which is yet to be instantiated, resulting in a
-random address being assigned that has to be manually overridden.
-
-[1] https://lore.kernel.org/netdev/20210919115725.29064-1-chunkeey@gmail.com
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bgmac-platform.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bgmac-platform.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-platform.c
-@@ -193,6 +193,9 @@ static int bgmac_probe(struct platform_d
- 	bgmac->dma_dev = &pdev->dev;
- 
- 	ret = of_get_mac_address(np, bgmac->net_dev->dev_addr);
-+	if (ret == -EPROBE_DEFER)
-+		return ret;
-+
- 	if (ret)
- 		dev_warn(&pdev->dev,
- 			 "MAC address not present in device tree\n");
diff --git a/target/linux/generic/backport-5.10/734-v5.16-0001-net-bgmac-improve-handling-PHY.patch b/target/linux/generic/backport-5.10/734-v5.16-0001-net-bgmac-improve-handling-PHY.patch
deleted file mode 100644
index 6788a2ec350e..000000000000
--- a/target/linux/generic/backport-5.10/734-v5.16-0001-net-bgmac-improve-handling-PHY.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From b5375509184dc23d2b7fa0c5ed8763899ccc9674 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 2 Oct 2021 19:58:11 +0200
-Subject: [PATCH] net: bgmac: improve handling PHY
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Use info from DT if available
-
-It allows describing for example a fixed link. It's more accurate than
-just guessing there may be one (depending on a chipset).
-
-2. Verify PHY ID before trying to connect PHY
-
-PHY addr 0x1e (30) is special in Broadcom routers and means a switch
-connected as MDIO devices instead of a real PHY. Don't try connecting to
-it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bgmac-bcma.c | 33 ++++++++++++++--------
- 1 file changed, 21 insertions(+), 12 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -11,6 +11,7 @@
- #include <linux/bcma/bcma.h>
- #include <linux/brcmphy.h>
- #include <linux/etherdevice.h>
-+#include <linux/of_mdio.h>
- #include <linux/of_net.h>
- #include "bgmac.h"
- 
-@@ -86,17 +87,28 @@ static int bcma_phy_connect(struct bgmac
- 	struct phy_device *phy_dev;
- 	char bus_id[MII_BUS_ID_SIZE + 3];
- 
-+	/* DT info should be the most accurate */
-+	phy_dev = of_phy_get_and_connect(bgmac->net_dev, bgmac->dev->of_node,
-+					 bgmac_adjust_link);
-+	if (phy_dev)
-+		return 0;
-+
- 	/* Connect to the PHY */
--	snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, bgmac->mii_bus->id,
--		 bgmac->phyaddr);
--	phy_dev = phy_connect(bgmac->net_dev, bus_id, bgmac_adjust_link,
--			      PHY_INTERFACE_MODE_MII);
--	if (IS_ERR(phy_dev)) {
--		dev_err(bgmac->dev, "PHY connection failed\n");
--		return PTR_ERR(phy_dev);
-+	if (bgmac->mii_bus && bgmac->phyaddr != BGMAC_PHY_NOREGS) {
-+		snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, bgmac->mii_bus->id,
-+			 bgmac->phyaddr);
-+		phy_dev = phy_connect(bgmac->net_dev, bus_id, bgmac_adjust_link,
-+				      PHY_INTERFACE_MODE_MII);
-+		if (IS_ERR(phy_dev)) {
-+			dev_err(bgmac->dev, "PHY connection failed\n");
-+			return PTR_ERR(phy_dev);
-+		}
-+
-+		return 0;
- 	}
- 
--	return 0;
-+	/* Assume a fixed link to the switch port */
-+	return bgmac_phy_connect_direct(bgmac);
- }
- 
- static const struct bcma_device_id bgmac_bcma_tbl[] = {
-@@ -297,10 +309,7 @@ static int bgmac_probe(struct bcma_devic
- 	bgmac->cco_ctl_maskset = bcma_bgmac_cco_ctl_maskset;
- 	bgmac->get_bus_clock = bcma_bgmac_get_bus_clock;
- 	bgmac->cmn_maskset32 = bcma_bgmac_cmn_maskset32;
--	if (bgmac->mii_bus)
--		bgmac->phy_connect = bcma_phy_connect;
--	else
--		bgmac->phy_connect = bgmac_phy_connect_direct;
-+	bgmac->phy_connect = bcma_phy_connect;
- 
- 	err = bgmac_enet_probe(bgmac);
- 	if (err)
diff --git a/target/linux/generic/backport-5.10/734-v5.16-0002-net-bgmac-support-MDIO-described-in-DT.patch b/target/linux/generic/backport-5.10/734-v5.16-0002-net-bgmac-support-MDIO-described-in-DT.patch
deleted file mode 100644
index f1348282739d..000000000000
--- a/target/linux/generic/backport-5.10/734-v5.16-0002-net-bgmac-support-MDIO-described-in-DT.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 45c9d966688e7fad7f24bfc450547d91e4304d0b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 2 Oct 2021 19:58:12 +0200
-Subject: [PATCH] net: bgmac: support MDIO described in DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Check ethernet controller DT node for "mdio" subnode and use it with
-of_mdiobus_register() when present. That allows specifying MDIO and its
-PHY devices in a standard DT based way.
-
-This is required for BCM53573 SoC support. That family is sometimes
-called Northstar (by marketing?) but is quite different from it. It uses
-different CPU(s) and many different hw blocks.
-
-One of shared blocks in BCM53573 is Ethernet controller. Switch however
-is not SRAB accessible (as it Northstar) but is MDIO attached.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
-@@ -10,6 +10,7 @@
- 
- #include <linux/bcma/bcma.h>
- #include <linux/brcmphy.h>
-+#include <linux/of_mdio.h>
- #include "bgmac.h"
- 
- static bool bcma_mdio_wait_value(struct bcma_device *core, u16 reg, u32 mask,
-@@ -211,6 +212,7 @@ struct mii_bus *bcma_mdio_mii_register(s
- {
- 	struct bcma_device *core = bgmac->bcma.core;
- 	struct mii_bus *mii_bus;
-+	struct device_node *np;
- 	int err;
- 
- 	mii_bus = mdiobus_alloc();
-@@ -229,7 +231,9 @@ struct mii_bus *bcma_mdio_mii_register(s
- 	mii_bus->parent = &core->dev;
- 	mii_bus->phy_mask = ~(1 << bgmac->phyaddr);
- 
--	err = mdiobus_register(mii_bus);
-+	np = of_get_child_by_name(core->dev.of_node, "mdio");
-+
-+	err = of_mdiobus_register(mii_bus, np);
- 	if (err) {
- 		dev_err(&core->dev, "Registration of mii bus failed\n");
- 		goto err_free_bus;
diff --git a/target/linux/generic/backport-5.10/735-v5.14-01-net-dsa-qca8k-change-simple-print-to-dev-variant.patch b/target/linux/generic/backport-5.10/735-v5.14-01-net-dsa-qca8k-change-simple-print-to-dev-variant.patch
deleted file mode 100644
index b8e6d9b613e5..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-01-net-dsa-qca8k-change-simple-print-to-dev-variant.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 5d9e068402dcf7354cc8ee66c2152845306d2ccb Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 22:59:51 +0200
-Subject: [PATCH] net: dsa: qca8k: change simple print to dev variant
-
-Change pr_err and pr_warn to dev variant.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -701,7 +701,7 @@ qca8k_setup(struct dsa_switch *ds)
- 
- 	/* Make sure that port 0 is the cpu port */
- 	if (!dsa_is_cpu_port(ds, 0)) {
--		pr_err("port 0 is not the CPU port\n");
-+		dev_err(priv->dev, "port 0 is not the CPU port");
- 		return -EINVAL;
- 	}
- 
-@@ -711,7 +711,7 @@ qca8k_setup(struct dsa_switch *ds)
- 	priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
- 					&qca8k_regmap_config);
- 	if (IS_ERR(priv->regmap))
--		pr_warn("regmap initialization failed");
-+		dev_warn(priv->dev, "regmap initialization failed");
- 
- 	ret = qca8k_setup_mdio_bus(priv);
- 	if (ret)
diff --git a/target/linux/generic/backport-5.10/735-v5.14-02-net-dsa-qca8k-use-iopoll-macro-for-qca8k_busy_wait.patch b/target/linux/generic/backport-5.10/735-v5.14-02-net-dsa-qca8k-use-iopoll-macro-for-qca8k_busy_wait.patch
deleted file mode 100644
index ff8288d48458..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-02-net-dsa-qca8k-use-iopoll-macro-for-qca8k_busy_wait.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 2ad255f2faaffb3af786031fba2e7955454b558a Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 22:59:52 +0200
-Subject: [PATCH] net: dsa: qca8k: use iopoll macro for qca8k_busy_wait
-
-Use iopoll macro instead of while loop.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 23 +++++++++++------------
- drivers/net/dsa/qca8k.h |  2 ++
- 2 files changed, 13 insertions(+), 12 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -262,21 +262,20 @@ static struct regmap_config qca8k_regmap
- static int
- qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
- {
--	unsigned long timeout;
-+	u32 val;
-+	int ret;
- 
--	timeout = jiffies + msecs_to_jiffies(20);
-+	ret = read_poll_timeout(qca8k_read, val, !(val & mask),
-+				0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
-+				priv, reg);
- 
--	/* loop until the busy flag has cleared */
--	do {
--		u32 val = qca8k_read(priv, reg);
--		int busy = val & mask;
-+	/* Check if qca8k_read has failed for a different reason
-+	 * before returning -ETIMEDOUT
-+	 */
-+	if (ret < 0 && val < 0)
-+		return val;
- 
--		if (!busy)
--			break;
--		cond_resched();
--	} while (!time_after_eq(jiffies, timeout));
--
--	return time_after_eq(jiffies, timeout);
-+	return ret;
- }
- 
- static void
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -18,6 +18,8 @@
- #define PHY_ID_QCA8337					0x004dd036
- #define QCA8K_ID_QCA8337				0x13
- 
-+#define QCA8K_BUSY_WAIT_TIMEOUT				20
-+
- #define QCA8K_NUM_FDB_RECORDS				2048
- 
- #define QCA8K_CPU_PORT					0
diff --git a/target/linux/generic/backport-5.10/735-v5.14-03-net-dsa-qca8k-improve-qca8k-read-write-rmw-bus-acces.patch b/target/linux/generic/backport-5.10/735-v5.14-03-net-dsa-qca8k-improve-qca8k-read-write-rmw-bus-acces.patch
deleted file mode 100644
index c4035898745e..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-03-net-dsa-qca8k-improve-qca8k-read-write-rmw-bus-acces.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 504bf65931824eda83494e5b5d75686e27ace03e Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 22:59:53 +0200
-Subject: [PATCH] net: dsa: qca8k: improve qca8k read/write/rmw bus access
-
-Put bus in local variable to improve faster access to the mdio bus.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 29 ++++++++++++++++-------------
- 1 file changed, 16 insertions(+), 13 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -142,17 +142,18 @@ qca8k_set_page(struct mii_bus *bus, u16
- static u32
- qca8k_read(struct qca8k_priv *priv, u32 reg)
- {
-+	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 	u32 val;
- 
- 	qca8k_split_addr(reg, &r1, &r2, &page);
- 
--	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
- 
--	qca8k_set_page(priv->bus, page);
--	val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
-+	qca8k_set_page(bus, page);
-+	val = qca8k_mii_read32(bus, 0x10 | r2, r1);
- 
--	mutex_unlock(&priv->bus->mdio_lock);
-+	mutex_unlock(&bus->mdio_lock);
- 
- 	return val;
- }
-@@ -160,35 +161,37 @@ qca8k_read(struct qca8k_priv *priv, u32
- static void
- qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
- {
-+	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 
- 	qca8k_split_addr(reg, &r1, &r2, &page);
- 
--	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
- 
--	qca8k_set_page(priv->bus, page);
--	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
-+	qca8k_set_page(bus, page);
-+	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
- 
--	mutex_unlock(&priv->bus->mdio_lock);
-+	mutex_unlock(&bus->mdio_lock);
- }
- 
- static u32
- qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 val)
- {
-+	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 	u32 ret;
- 
- 	qca8k_split_addr(reg, &r1, &r2, &page);
- 
--	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
- 
--	qca8k_set_page(priv->bus, page);
--	ret = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
-+	qca8k_set_page(bus, page);
-+	ret = qca8k_mii_read32(bus, 0x10 | r2, r1);
- 	ret &= ~mask;
- 	ret |= val;
--	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, ret);
-+	qca8k_mii_write32(bus, 0x10 | r2, r1, ret);
- 
--	mutex_unlock(&priv->bus->mdio_lock);
-+	mutex_unlock(&bus->mdio_lock);
- 
- 	return ret;
- }
diff --git a/target/linux/generic/backport-5.10/735-v5.14-04-net-dsa-qca8k-handle-qca8k_set_page-errors.patch b/target/linux/generic/backport-5.10/735-v5.14-04-net-dsa-qca8k-handle-qca8k_set_page-errors.patch
deleted file mode 100644
index 6be494a8c7c8..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-04-net-dsa-qca8k-handle-qca8k_set_page-errors.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From ba5707ec58cfb6853dff41c2aae72deb6a03d389 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 22:59:54 +0200
-Subject: [PATCH] net: dsa: qca8k: handle qca8k_set_page errors
-
-With a remote possibility, the set_page function can fail. Since this is
-a critical part of the write/read qca8k regs, propagate the error and
-terminate any read/write operation.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 33 ++++++++++++++++++++++++++-------
- 1 file changed, 26 insertions(+), 7 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -127,16 +127,23 @@ qca8k_mii_write32(struct mii_bus *bus, i
- 				    "failed to write qca8k 32bit register\n");
- }
- 
--static void
-+static int
- qca8k_set_page(struct mii_bus *bus, u16 page)
- {
-+	int ret;
-+
- 	if (page == qca8k_current_page)
--		return;
-+		return 0;
- 
--	if (bus->write(bus, 0x18, 0, page) < 0)
-+	ret = bus->write(bus, 0x18, 0, page);
-+	if (ret < 0) {
- 		dev_err_ratelimited(&bus->dev,
- 				    "failed to set qca8k page\n");
-+		return ret;
-+	}
-+
- 	qca8k_current_page = page;
-+	return 0;
- }
- 
- static u32
-@@ -150,11 +157,14 @@ qca8k_read(struct qca8k_priv *priv, u32
- 
- 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
- 
--	qca8k_set_page(bus, page);
-+	val = qca8k_set_page(bus, page);
-+	if (val < 0)
-+		goto exit;
-+
- 	val = qca8k_mii_read32(bus, 0x10 | r2, r1);
- 
-+exit:
- 	mutex_unlock(&bus->mdio_lock);
--
- 	return val;
- }
- 
-@@ -163,14 +173,19 @@ qca8k_write(struct qca8k_priv *priv, u32
- {
- 	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
-+	int ret;
- 
- 	qca8k_split_addr(reg, &r1, &r2, &page);
- 
- 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
- 
--	qca8k_set_page(bus, page);
-+	ret = qca8k_set_page(bus, page);
-+	if (ret < 0)
-+		goto exit;
-+
- 	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
- 
-+exit:
- 	mutex_unlock(&bus->mdio_lock);
- }
- 
-@@ -185,12 +200,16 @@ qca8k_rmw(struct qca8k_priv *priv, u32 r
- 
- 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
- 
--	qca8k_set_page(bus, page);
-+	ret = qca8k_set_page(bus, page);
-+	if (ret < 0)
-+		goto exit;
-+
- 	ret = qca8k_mii_read32(bus, 0x10 | r2, r1);
- 	ret &= ~mask;
- 	ret |= val;
- 	qca8k_mii_write32(bus, 0x10 | r2, r1, ret);
- 
-+exit:
- 	mutex_unlock(&bus->mdio_lock);
- 
- 	return ret;
diff --git a/target/linux/generic/backport-5.10/735-v5.14-05-net-dsa-qca8k-handle-error-with-qca8k_read-operation.patch b/target/linux/generic/backport-5.10/735-v5.14-05-net-dsa-qca8k-handle-error-with-qca8k_read-operation.patch
deleted file mode 100644
index 3349b7897a17..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-05-net-dsa-qca8k-handle-error-with-qca8k_read-operation.patch
+++ /dev/null
@@ -1,207 +0,0 @@
-From 028f5f8ef44fcf87a456772cbb9f0d90a0a22884 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 22:59:55 +0200
-Subject: [PATCH] net: dsa: qca8k: handle error with qca8k_read operation
-
-qca8k_read can fail. Rework any user to handle error values and
-correctly return.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 73 ++++++++++++++++++++++++++++++++---------
- 1 file changed, 58 insertions(+), 15 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -231,8 +231,13 @@ static int
- qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
-+	int ret;
-+
-+	ret = qca8k_read(priv, reg);
-+	if (ret < 0)
-+		return ret;
- 
--	*val = qca8k_read(priv, reg);
-+	*val = ret;
- 
- 	return 0;
- }
-@@ -300,15 +305,20 @@ qca8k_busy_wait(struct qca8k_priv *priv,
- 	return ret;
- }
- 
--static void
-+static int
- qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb)
- {
--	u32 reg[4];
-+	u32 reg[4], val;
- 	int i;
- 
- 	/* load the ARL table into an array */
--	for (i = 0; i < 4; i++)
--		reg[i] = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4));
-+	for (i = 0; i < 4; i++) {
-+		val = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4));
-+		if (val < 0)
-+			return val;
-+
-+		reg[i] = val;
-+	}
- 
- 	/* vid - 83:72 */
- 	fdb->vid = (reg[2] >> QCA8K_ATU_VID_S) & QCA8K_ATU_VID_M;
-@@ -323,6 +333,8 @@ qca8k_fdb_read(struct qca8k_priv *priv,
- 	fdb->mac[3] = (reg[0] >> QCA8K_ATU_ADDR3_S) & 0xff;
- 	fdb->mac[4] = (reg[0] >> QCA8K_ATU_ADDR4_S) & 0xff;
- 	fdb->mac[5] = reg[0] & 0xff;
-+
-+	return 0;
- }
- 
- static void
-@@ -374,6 +386,8 @@ qca8k_fdb_access(struct qca8k_priv *priv
- 	/* Check for table full violation when adding an entry */
- 	if (cmd == QCA8K_FDB_LOAD) {
- 		reg = qca8k_read(priv, QCA8K_REG_ATU_FUNC);
-+		if (reg < 0)
-+			return reg;
- 		if (reg & QCA8K_ATU_FUNC_FULL)
- 			return -1;
- 	}
-@@ -388,10 +402,10 @@ qca8k_fdb_next(struct qca8k_priv *priv,
- 
- 	qca8k_fdb_write(priv, fdb->vid, fdb->port_mask, fdb->mac, fdb->aging);
- 	ret = qca8k_fdb_access(priv, QCA8K_FDB_NEXT, port);
--	if (ret >= 0)
--		qca8k_fdb_read(priv, fdb);
-+	if (ret < 0)
-+		return ret;
- 
--	return ret;
-+	return qca8k_fdb_read(priv, fdb);
- }
- 
- static int
-@@ -449,6 +463,8 @@ qca8k_vlan_access(struct qca8k_priv *pri
- 	/* Check for table full violation when adding an entry */
- 	if (cmd == QCA8K_VLAN_LOAD) {
- 		reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC1);
-+		if (reg < 0)
-+			return reg;
- 		if (reg & QCA8K_VTU_FUNC1_FULL)
- 			return -ENOMEM;
- 	}
-@@ -475,6 +491,8 @@ qca8k_vlan_add(struct qca8k_priv *priv,
- 		goto out;
- 
- 	reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0);
-+	if (reg < 0)
-+		return reg;
- 	reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN;
- 	reg &= ~(QCA8K_VTU_FUNC0_EG_MODE_MASK << QCA8K_VTU_FUNC0_EG_MODE_S(port));
- 	if (untagged)
-@@ -506,6 +524,8 @@ qca8k_vlan_del(struct qca8k_priv *priv,
- 		goto out;
- 
- 	reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0);
-+	if (reg < 0)
-+		return reg;
- 	reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port));
- 	reg |= QCA8K_VTU_FUNC0_EG_MODE_NOT <<
- 			QCA8K_VTU_FUNC0_EG_MODE_S(port);
-@@ -621,8 +641,11 @@ qca8k_mdio_read(struct qca8k_priv *priv,
- 			    QCA8K_MDIO_MASTER_BUSY))
- 		return -ETIMEDOUT;
- 
--	val = (qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL) &
--		QCA8K_MDIO_MASTER_DATA_MASK);
-+	val = qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL);
-+	if (val < 0)
-+		return val;
-+
-+	val &= QCA8K_MDIO_MASTER_DATA_MASK;
- 
- 	return val;
- }
-@@ -978,6 +1001,8 @@ qca8k_phylink_mac_link_state(struct dsa_
- 	u32 reg;
- 
- 	reg = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port));
-+	if (reg < 0)
-+		return reg;
- 
- 	state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP);
- 	state->an_complete = state->link;
-@@ -1078,18 +1103,26 @@ qca8k_get_ethtool_stats(struct dsa_switc
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
- 	const struct qca8k_mib_desc *mib;
--	u32 reg, i;
-+	u32 reg, i, val;
- 	u64 hi;
- 
- 	for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
- 		mib = &ar8327_mib[i];
- 		reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset;
- 
--		data[i] = qca8k_read(priv, reg);
-+		val = qca8k_read(priv, reg);
-+		if (val < 0)
-+			continue;
-+
- 		if (mib->size == 2) {
- 			hi = qca8k_read(priv, reg + 4);
--			data[i] |= hi << 32;
-+			if (hi < 0)
-+				continue;
- 		}
-+
-+		data[i] = val;
-+		if (mib->size == 2)
-+			data[i] |= hi << 32;
- 	}
- }
- 
-@@ -1107,18 +1140,25 @@ qca8k_set_mac_eee(struct dsa_switch *ds,
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
- 	u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port);
-+	int ret = 0;
- 	u32 reg;
- 
- 	mutex_lock(&priv->reg_mutex);
- 	reg = qca8k_read(priv, QCA8K_REG_EEE_CTRL);
-+	if (reg < 0) {
-+		ret = reg;
-+		goto exit;
-+	}
-+
- 	if (eee->eee_enabled)
- 		reg |= lpi_en;
- 	else
- 		reg &= ~lpi_en;
- 	qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
--	mutex_unlock(&priv->reg_mutex);
- 
--	return 0;
-+exit:
-+	mutex_unlock(&priv->reg_mutex);
-+	return ret;
- }
- 
- static int
-@@ -1456,6 +1496,9 @@ qca8k_sw_probe(struct mdio_device *mdiod
- 
- 	/* read the switches ID register */
- 	id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
-+	if (id < 0)
-+		return id;
-+
- 	id >>= QCA8K_MASK_CTRL_ID_S;
- 	id &= QCA8K_MASK_CTRL_ID_M;
- 	if (id != QCA8K_ID_QCA8337)
diff --git a/target/linux/generic/backport-5.10/735-v5.14-06-net-dsa-qca8k-handle-error-with-qca8k_write-operatio.patch b/target/linux/generic/backport-5.10/735-v5.14-06-net-dsa-qca8k-handle-error-with-qca8k_write-operatio.patch
deleted file mode 100644
index 1e0e224c39d9..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-06-net-dsa-qca8k-handle-error-with-qca8k_write-operatio.patch
+++ /dev/null
@@ -1,263 +0,0 @@
-From d7805757c75c76e9518fc1023a29f0c4eed5b581 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 22:59:56 +0200
-Subject: [PATCH] net: dsa: qca8k: handle error with qca8k_write operation
-
-qca8k_write can fail. Rework any user to handle error values and
-correctly return.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 102 ++++++++++++++++++++++++++--------------
- 1 file changed, 67 insertions(+), 35 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -168,7 +168,7 @@ exit:
- 	return val;
- }
- 
--static void
-+static int
- qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
- {
- 	struct mii_bus *bus = priv->bus;
-@@ -187,6 +187,7 @@ qca8k_write(struct qca8k_priv *priv, u32
- 
- exit:
- 	mutex_unlock(&bus->mdio_lock);
-+	return ret;
- }
- 
- static u32
-@@ -247,9 +248,7 @@ qca8k_regmap_write(void *ctx, uint32_t r
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
- 
--	qca8k_write(priv, reg, val);
--
--	return 0;
-+	return qca8k_write(priv, reg, val);
- }
- 
- static const struct regmap_range qca8k_readable_ranges[] = {
-@@ -367,6 +366,7 @@ static int
- qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd, int port)
- {
- 	u32 reg;
-+	int ret;
- 
- 	/* Set the command and FDB index */
- 	reg = QCA8K_ATU_FUNC_BUSY;
-@@ -377,7 +377,9 @@ qca8k_fdb_access(struct qca8k_priv *priv
- 	}
- 
- 	/* Write the function register triggering the table access */
--	qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg);
-+	ret = qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg);
-+	if (ret)
-+		return ret;
- 
- 	/* wait for completion */
- 	if (qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY))
-@@ -447,6 +449,7 @@ static int
- qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid)
- {
- 	u32 reg;
-+	int ret;
- 
- 	/* Set the command and VLAN index */
- 	reg = QCA8K_VTU_FUNC1_BUSY;
-@@ -454,7 +457,9 @@ qca8k_vlan_access(struct qca8k_priv *pri
- 	reg |= vid << QCA8K_VTU_FUNC1_VID_S;
- 
- 	/* Write the function register triggering the table access */
--	qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg);
-+	ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg);
-+	if (ret)
-+		return ret;
- 
- 	/* wait for completion */
- 	if (qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY))
-@@ -502,7 +507,9 @@ qca8k_vlan_add(struct qca8k_priv *priv,
- 		reg |= QCA8K_VTU_FUNC0_EG_MODE_TAG <<
- 				QCA8K_VTU_FUNC0_EG_MODE_S(port);
- 
--	qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
-+	ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
-+	if (ret)
-+		return ret;
- 	ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
- 
- out:
-@@ -545,7 +552,9 @@ qca8k_vlan_del(struct qca8k_priv *priv,
- 	if (del) {
- 		ret = qca8k_vlan_access(priv, QCA8K_VLAN_PURGE, vid);
- 	} else {
--		qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
-+		ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
-+		if (ret)
-+			return ret;
- 		ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
- 	}
- 
-@@ -555,15 +564,20 @@ out:
- 	return ret;
- }
- 
--static void
-+static int
- qca8k_mib_init(struct qca8k_priv *priv)
- {
-+	int ret;
-+
- 	mutex_lock(&priv->reg_mutex);
- 	qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
- 	qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
- 	qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
--	qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
-+
-+	ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
-+
- 	mutex_unlock(&priv->reg_mutex);
-+	return ret;
- }
- 
- static void
-@@ -600,6 +614,7 @@ static int
- qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
- {
- 	u32 phy, val;
-+	int ret;
- 
- 	if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
- 		return -EINVAL;
-@@ -613,7 +628,9 @@ qca8k_mdio_write(struct qca8k_priv *priv
- 	      QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
- 	      QCA8K_MDIO_MASTER_DATA(data);
- 
--	qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
-+	ret = qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
-+	if (ret)
-+		return ret;
- 
- 	return qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
- 		QCA8K_MDIO_MASTER_BUSY);
-@@ -623,6 +640,7 @@ static int
- qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
- {
- 	u32 phy, val;
-+	int ret;
- 
- 	if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
- 		return -EINVAL;
-@@ -635,7 +653,9 @@ qca8k_mdio_read(struct qca8k_priv *priv,
- 	      QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
- 	      QCA8K_MDIO_MASTER_REG_ADDR(regnum);
- 
--	qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
-+	ret = qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
-+	if (ret)
-+		return ret;
- 
- 	if (qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
- 			    QCA8K_MDIO_MASTER_BUSY))
-@@ -766,12 +786,18 @@ qca8k_setup(struct dsa_switch *ds)
- 		      QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
- 
- 	/* Enable MIB counters */
--	qca8k_mib_init(priv);
-+	ret = qca8k_mib_init(priv);
-+	if (ret)
-+		dev_warn(priv->dev, "mib init failed");
- 
- 	/* Enable QCA header mode on the cpu port */
--	qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT),
--		    QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
--		    QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
-+	ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT),
-+			  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
-+			  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
-+	if (ret) {
-+		dev_err(priv->dev, "failed enabling QCA header mode");
-+		return ret;
-+	}
- 
- 	/* Disable forwarding by default on all ports */
- 	for (i = 0; i < QCA8K_NUM_PORTS; i++)
-@@ -783,11 +809,13 @@ qca8k_setup(struct dsa_switch *ds)
- 		qca8k_port_set_status(priv, i, 0);
- 
- 	/* Forward all unknown frames to CPU port for Linux processing */
--	qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
--		    BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
--		    BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
--		    BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
--		    BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
-+	ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
-+			  BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
-+			  BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
-+			  BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
-+			  BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
-+	if (ret)
-+		return ret;
- 
- 	/* Setup connection between CPU port & user ports */
- 	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
-@@ -815,16 +843,20 @@ qca8k_setup(struct dsa_switch *ds)
- 			qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
- 				  0xfff << shift,
- 				  QCA8K_PORT_VID_DEF << shift);
--			qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
--				    QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
--				    QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
-+			ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
-+					  QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
-+					  QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
-+			if (ret)
-+				return ret;
- 		}
- 	}
- 
- 	/* Setup our port MTUs to match power on defaults */
- 	for (i = 0; i < QCA8K_NUM_PORTS; i++)
- 		priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
--	qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
-+	ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
-+	if (ret)
-+		dev_warn(priv->dev, "failed setting MTU settings");
- 
- 	/* Flush the FDB table */
- 	qca8k_fdb_flush(priv);
-@@ -1140,8 +1172,8 @@ qca8k_set_mac_eee(struct dsa_switch *ds,
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
- 	u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port);
--	int ret = 0;
- 	u32 reg;
-+	int ret;
- 
- 	mutex_lock(&priv->reg_mutex);
- 	reg = qca8k_read(priv, QCA8K_REG_EEE_CTRL);
-@@ -1154,7 +1186,7 @@ qca8k_set_mac_eee(struct dsa_switch *ds,
- 		reg |= lpi_en;
- 	else
- 		reg &= ~lpi_en;
--	qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
-+	ret = qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
- 
- exit:
- 	mutex_unlock(&priv->reg_mutex);
-@@ -1284,9 +1316,7 @@ qca8k_port_change_mtu(struct dsa_switch
- 			mtu = priv->port_mtu[i];
- 
- 	/* Include L2 header / FCS length */
--	qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN);
--
--	return 0;
-+	return qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN);
- }
- 
- static int
diff --git a/target/linux/generic/backport-5.10/735-v5.14-07-net-dsa-qca8k-handle-error-with-qca8k_rmw-operation.patch b/target/linux/generic/backport-5.10/735-v5.14-07-net-dsa-qca8k-handle-error-with-qca8k_rmw-operation.patch
deleted file mode 100644
index 506966f1af57..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-07-net-dsa-qca8k-handle-error-with-qca8k_rmw-operation.patch
+++ /dev/null
@@ -1,226 +0,0 @@
-From aaf421425cbdec4eb6fd75a29e65c2867b0b7bbd Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 22:59:57 +0200
-Subject: [PATCH] net: dsa: qca8k: handle error with qca8k_rmw operation
-
-qca8k_rmw can fail. Rework any user to handle error values and
-correctly return. Change qca8k_rmw to return the error code or 0 instead
-of the reg value. The reg returned by qca8k_rmw wasn't used anywhere,
-so this doesn't cause any functional change.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 133 +++++++++++++++++++++++++---------------
- 1 file changed, 83 insertions(+), 50 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -190,12 +190,13 @@ exit:
- 	return ret;
- }
- 
--static u32
--qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 val)
-+static int
-+qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
- {
- 	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
--	u32 ret;
-+	u32 val;
-+	int ret;
- 
- 	qca8k_split_addr(reg, &r1, &r2, &page);
- 
-@@ -205,10 +206,15 @@ qca8k_rmw(struct qca8k_priv *priv, u32 r
- 	if (ret < 0)
- 		goto exit;
- 
--	ret = qca8k_mii_read32(bus, 0x10 | r2, r1);
--	ret &= ~mask;
--	ret |= val;
--	qca8k_mii_write32(bus, 0x10 | r2, r1, ret);
-+	val = qca8k_mii_read32(bus, 0x10 | r2, r1);
-+	if (val < 0) {
-+		ret = val;
-+		goto exit;
-+	}
-+
-+	val &= ~mask;
-+	val |= write_val;
-+	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
- 
- exit:
- 	mutex_unlock(&bus->mdio_lock);
-@@ -216,16 +222,16 @@ exit:
- 	return ret;
- }
- 
--static void
-+static int
- qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val)
- {
--	qca8k_rmw(priv, reg, 0, val);
-+	return qca8k_rmw(priv, reg, 0, val);
- }
- 
--static void
-+static int
- qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val)
- {
--	qca8k_rmw(priv, reg, val, 0);
-+	return qca8k_rmw(priv, reg, val, 0);
- }
- 
- static int
-@@ -570,12 +576,19 @@ qca8k_mib_init(struct qca8k_priv *priv)
- 	int ret;
- 
- 	mutex_lock(&priv->reg_mutex);
--	qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
-+	ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
-+	if (ret)
-+		goto exit;
-+
- 	qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
--	qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
-+
-+	ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
-+	if (ret)
-+		goto exit;
- 
- 	ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
- 
-+exit:
- 	mutex_unlock(&priv->reg_mutex);
- 	return ret;
- }
-@@ -747,9 +760,8 @@ qca8k_setup_mdio_bus(struct qca8k_priv *
- 		 * a dt-overlay and driver reload changed the configuration
- 		 */
- 
--		qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
--				QCA8K_MDIO_MASTER_EN);
--		return 0;
-+		return qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
-+				       QCA8K_MDIO_MASTER_EN);
- 	}
- 
- 	priv->ops.phy_read = qca8k_phy_read;
-@@ -782,8 +794,12 @@ qca8k_setup(struct dsa_switch *ds)
- 		return ret;
- 
- 	/* Enable CPU Port */
--	qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
--		      QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
-+	ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
-+			    QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
-+	if (ret) {
-+		dev_err(priv->dev, "failed enabling CPU port");
-+		return ret;
-+	}
- 
- 	/* Enable MIB counters */
- 	ret = qca8k_mib_init(priv);
-@@ -800,9 +816,12 @@ qca8k_setup(struct dsa_switch *ds)
- 	}
- 
- 	/* Disable forwarding by default on all ports */
--	for (i = 0; i < QCA8K_NUM_PORTS; i++)
--		qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
--			  QCA8K_PORT_LOOKUP_MEMBER, 0);
-+	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
-+		ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
-+				QCA8K_PORT_LOOKUP_MEMBER, 0);
-+		if (ret)
-+			return ret;
-+	}
- 
- 	/* Disable MAC by default on all ports */
- 	for (i = 1; i < QCA8K_NUM_PORTS; i++)
-@@ -821,28 +840,37 @@ qca8k_setup(struct dsa_switch *ds)
- 	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
- 		/* CPU port gets connected to all user ports of the switch */
- 		if (dsa_is_cpu_port(ds, i)) {
--			qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
--				  QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
-+			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
-+					QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
-+			if (ret)
-+				return ret;
- 		}
- 
- 		/* Individual user ports get connected to CPU port only */
- 		if (dsa_is_user_port(ds, i)) {
- 			int shift = 16 * (i % 2);
- 
--			qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
--				  QCA8K_PORT_LOOKUP_MEMBER,
--				  BIT(QCA8K_CPU_PORT));
-+			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
-+					QCA8K_PORT_LOOKUP_MEMBER,
-+					BIT(QCA8K_CPU_PORT));
-+			if (ret)
-+				return ret;
- 
- 			/* Enable ARP Auto-learning by default */
--			qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i),
--				      QCA8K_PORT_LOOKUP_LEARN);
-+			ret = qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i),
-+					    QCA8K_PORT_LOOKUP_LEARN);
-+			if (ret)
-+				return ret;
- 
- 			/* For port based vlans to work we need to set the
- 			 * default egress vid
- 			 */
--			qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
--				  0xfff << shift,
--				  QCA8K_PORT_VID_DEF << shift);
-+			ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
-+					0xfff << shift,
-+					QCA8K_PORT_VID_DEF << shift);
-+			if (ret)
-+				return ret;
-+
- 			ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
- 					  QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
- 					  QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
-@@ -1234,7 +1262,7 @@ qca8k_port_bridge_join(struct dsa_switch
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
- 	int port_mask = BIT(QCA8K_CPU_PORT);
--	int i;
-+	int i, ret;
- 
- 	for (i = 1; i < QCA8K_NUM_PORTS; i++) {
- 		if (dsa_to_port(ds, i)->bridge_dev != br)
-@@ -1242,17 +1270,20 @@ qca8k_port_bridge_join(struct dsa_switch
- 		/* Add this port to the portvlan mask of the other ports
- 		 * in the bridge
- 		 */
--		qca8k_reg_set(priv,
--			      QCA8K_PORT_LOOKUP_CTRL(i),
--			      BIT(port));
-+		ret = qca8k_reg_set(priv,
-+				    QCA8K_PORT_LOOKUP_CTRL(i),
-+				    BIT(port));
-+		if (ret)
-+			return ret;
- 		if (i != port)
- 			port_mask |= BIT(i);
- 	}
-+
- 	/* Add all other ports to this ports portvlan mask */
--	qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
--		  QCA8K_PORT_LOOKUP_MEMBER, port_mask);
-+	ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
-+			QCA8K_PORT_LOOKUP_MEMBER, port_mask);
- 
--	return 0;
-+	return ret;
- }
- 
- static void
diff --git a/target/linux/generic/backport-5.10/735-v5.14-08-net-dsa-qca8k-handle-error-from-qca8k_busy_wait.patch b/target/linux/generic/backport-5.10/735-v5.14-08-net-dsa-qca8k-handle-error-from-qca8k_busy_wait.patch
deleted file mode 100644
index 360ce1d9473c..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-08-net-dsa-qca8k-handle-error-from-qca8k_busy_wait.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From b7c818d194927bdc60ed15db55bb8654496a36b7 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 22:59:58 +0200
-Subject: [PATCH] net: dsa: qca8k: handle error from qca8k_busy_wait
-
-Propagate errors from qca8k_busy_wait instead of hardcoding return
-value.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 21 +++++++++++++--------
- 1 file changed, 13 insertions(+), 8 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -388,8 +388,9 @@ qca8k_fdb_access(struct qca8k_priv *priv
- 		return ret;
- 
- 	/* wait for completion */
--	if (qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY))
--		return -1;
-+	ret = qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY);
-+	if (ret)
-+		return ret;
- 
- 	/* Check for table full violation when adding an entry */
- 	if (cmd == QCA8K_FDB_LOAD) {
-@@ -468,8 +469,9 @@ qca8k_vlan_access(struct qca8k_priv *pri
- 		return ret;
- 
- 	/* wait for completion */
--	if (qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY))
--		return -ETIMEDOUT;
-+	ret = qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY);
-+	if (ret)
-+		return ret;
- 
- 	/* Check for table full violation when adding an entry */
- 	if (cmd == QCA8K_VLAN_LOAD) {
-@@ -580,7 +582,9 @@ qca8k_mib_init(struct qca8k_priv *priv)
- 	if (ret)
- 		goto exit;
- 
--	qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
-+	ret = qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
-+	if (ret)
-+		goto exit;
- 
- 	ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
- 	if (ret)
-@@ -670,9 +674,10 @@ qca8k_mdio_read(struct qca8k_priv *priv,
- 	if (ret)
- 		return ret;
- 
--	if (qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
--			    QCA8K_MDIO_MASTER_BUSY))
--		return -ETIMEDOUT;
-+	ret = qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
-+			      QCA8K_MDIO_MASTER_BUSY);
-+	if (ret)
-+		return ret;
- 
- 	val = qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL);
- 	if (val < 0)
diff --git a/target/linux/generic/backport-5.10/735-v5.14-09-net-dsa-qca8k-add-support-for-qca8327-switch.patch b/target/linux/generic/backport-5.10/735-v5.14-09-net-dsa-qca8k-add-support-for-qca8327-switch.patch
deleted file mode 100644
index 72305850cab6..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-09-net-dsa-qca8k-add-support-for-qca8327-switch.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 6e82a457e06252b59102486767539cc9c2aba60b Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 22:59:59 +0200
-Subject: [PATCH] net: dsa: qca8k: add support for qca8327 switch
-
-qca8327 switch is a low tier version of the more recent qca8337.
-It does share the same regs used by the qca8k driver and can be
-supported with minimal change.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 23 ++++++++++++++++++++---
- drivers/net/dsa/qca8k.h |  6 ++++++
- 2 files changed, 26 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1533,6 +1533,7 @@ static const struct dsa_switch_ops qca8k
- static int
- qca8k_sw_probe(struct mdio_device *mdiodev)
- {
-+	const struct qca8k_match_data *data;
- 	struct qca8k_priv *priv;
- 	u32 id;
- 
-@@ -1560,6 +1561,11 @@ qca8k_sw_probe(struct mdio_device *mdiod
- 		gpiod_set_value_cansleep(priv->reset_gpio, 0);
- 	}
- 
-+	/* get the switches ID from the compatible */
-+	data = of_device_get_match_data(&mdiodev->dev);
-+	if (!data)
-+		return -ENODEV;
-+
- 	/* read the switches ID register */
- 	id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
- 	if (id < 0)
-@@ -1567,8 +1573,10 @@ qca8k_sw_probe(struct mdio_device *mdiod
- 
- 	id >>= QCA8K_MASK_CTRL_ID_S;
- 	id &= QCA8K_MASK_CTRL_ID_M;
--	if (id != QCA8K_ID_QCA8337)
-+	if (id != data->id) {
-+		dev_err(&mdiodev->dev, "Switch id detected %x but expected %x", id, data->id);
- 		return -ENODEV;
-+	}
- 
- 	priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
- 	if (!priv->ds)
-@@ -1634,9 +1642,18 @@ static int qca8k_resume(struct device *d
- static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
- 			 qca8k_suspend, qca8k_resume);
- 
-+static const struct qca8k_match_data qca832x = {
-+	.id = QCA8K_ID_QCA8327,
-+};
-+
-+static const struct qca8k_match_data qca833x = {
-+	.id = QCA8K_ID_QCA8337,
-+};
-+
- static const struct of_device_id qca8k_of_match[] = {
--	{ .compatible = "qca,qca8334" },
--	{ .compatible = "qca,qca8337" },
-+	{ .compatible = "qca,qca8327", .data = &qca832x },
-+	{ .compatible = "qca,qca8334", .data = &qca833x },
-+	{ .compatible = "qca,qca8337", .data = &qca833x },
- 	{ /* sentinel */ },
- };
- 
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -15,6 +15,8 @@
- #define QCA8K_NUM_PORTS					7
- #define QCA8K_MAX_MTU					9000
- 
-+#define PHY_ID_QCA8327					0x004dd034
-+#define QCA8K_ID_QCA8327				0x12
- #define PHY_ID_QCA8337					0x004dd036
- #define QCA8K_ID_QCA8337				0x13
- 
-@@ -213,6 +215,10 @@ struct ar8xxx_port_status {
- 	int enabled;
- };
- 
-+struct qca8k_match_data {
-+	u8 id;
-+};
-+
- struct qca8k_priv {
- 	struct regmap *regmap;
- 	struct mii_bus *bus;
diff --git a/target/linux/generic/backport-5.10/735-v5.14-10-devicetree-net-dsa-qca8k-Document-new-compatible-qca.patch b/target/linux/generic/backport-5.10/735-v5.14-10-devicetree-net-dsa-qca8k-Document-new-compatible-qca.patch
deleted file mode 100644
index 3c4a14bd0b0b..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-10-devicetree-net-dsa-qca8k-Document-new-compatible-qca.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 227a9ffc1bc77037339530607fe129af3824620e Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:00 +0200
-Subject: [PATCH] devicetree: net: dsa: qca8k: Document new compatible qca8327
-
-Add support for qca8327 in the compatible list.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Acked-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- Documentation/devicetree/bindings/net/dsa/qca8k.txt | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-@@ -3,6 +3,7 @@
- Required properties:
- 
- - compatible: should be one of:
-+    "qca,qca8327"
-     "qca,qca8334"
-     "qca,qca8337"
- 
diff --git a/target/linux/generic/backport-5.10/735-v5.14-11-net-dsa-qca8k-add-priority-tweak-to-qca8337-switch.patch b/target/linux/generic/backport-5.10/735-v5.14-11-net-dsa-qca8k-add-priority-tweak-to-qca8337-switch.patch
deleted file mode 100644
index cd3050ef7196..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-11-net-dsa-qca8k-add-priority-tweak-to-qca8337-switch.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From 83a3ceb39b2495171aabe9446271b94c678354f3 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:01 +0200
-Subject: [PATCH] net: dsa: qca8k: add priority tweak to qca8337 switch
-
-The port 5 of the qca8337 have some problem in flood condition. The
-original legacy driver had some specific buffer and priority settings
-for the different port suggested by the QCA switch team. Add this
-missing settings to improve switch stability under load condition.
-The packet priority tweak is only needed for the qca8337 switch and
-other qca8k switch are not affected.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 47 +++++++++++++++++++++++++++++++++++++++++
- drivers/net/dsa/qca8k.h | 25 ++++++++++++++++++++++
- 2 files changed, 72 insertions(+)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -779,6 +779,7 @@ qca8k_setup(struct dsa_switch *ds)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
- 	int ret, i;
-+	u32 mask;
- 
- 	/* Make sure that port 0 is the cpu port */
- 	if (!dsa_is_cpu_port(ds, 0)) {
-@@ -884,6 +885,51 @@ qca8k_setup(struct dsa_switch *ds)
- 		}
- 	}
- 
-+	/* The port 5 of the qca8337 have some problem in flood condition. The
-+	 * original legacy driver had some specific buffer and priority settings
-+	 * for the different port suggested by the QCA switch team. Add this
-+	 * missing settings to improve switch stability under load condition.
-+	 * This problem is limited to qca8337 and other qca8k switch are not affected.
-+	 */
-+	if (priv->switch_id == QCA8K_ID_QCA8337) {
-+		for (i = 0; i < QCA8K_NUM_PORTS; i++) {
-+			switch (i) {
-+			/* The 2 CPU port and port 5 requires some different
-+			 * priority than any other ports.
-+			 */
-+			case 0:
-+			case 5:
-+			case 6:
-+				mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
-+					QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
-+					QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
-+					QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
-+					QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
-+					QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
-+					QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
-+				break;
-+			default:
-+				mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
-+					QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
-+					QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
-+					QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
-+					QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
-+			}
-+			qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask);
-+
-+			mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
-+			QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
-+			QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
-+			QCA8K_PORT_HOL_CTRL1_WRED_EN;
-+			qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
-+				  QCA8K_PORT_HOL_CTRL1_ING_BUF |
-+				  QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
-+				  QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
-+				  QCA8K_PORT_HOL_CTRL1_WRED_EN,
-+				  mask);
-+		}
-+	}
-+
- 	/* Setup our port MTUs to match power on defaults */
- 	for (i = 0; i < QCA8K_NUM_PORTS; i++)
- 		priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
-@@ -1578,6 +1624,7 @@ qca8k_sw_probe(struct mdio_device *mdiod
- 		return -ENODEV;
- 	}
- 
-+	priv->switch_id = id;
- 	priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
- 	if (!priv->ds)
- 		return -ENOMEM;
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -168,6 +168,30 @@
- #define   QCA8K_PORT_LOOKUP_STATE			GENMASK(18, 16)
- #define   QCA8K_PORT_LOOKUP_LEARN			BIT(20)
- 
-+#define QCA8K_REG_PORT_HOL_CTRL0(_i)			(0x970 + (_i) * 0x8)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF		GENMASK(3, 0)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI0(x)		((x) << 0)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF		GENMASK(7, 4)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI1(x)		((x) << 4)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF		GENMASK(11, 8)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI2(x)		((x) << 8)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF		GENMASK(15, 12)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI3(x)		((x) << 12)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF		GENMASK(19, 16)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI4(x)		((x) << 16)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF		GENMASK(23, 20)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI5(x)		((x) << 20)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF		GENMASK(29, 24)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PORT(x)		((x) << 24)
-+
-+#define QCA8K_REG_PORT_HOL_CTRL1(_i)			(0x974 + (_i) * 0x8)
-+#define   QCA8K_PORT_HOL_CTRL1_ING_BUF			GENMASK(3, 0)
-+#define   QCA8K_PORT_HOL_CTRL1_ING(x)			((x) << 0)
-+#define   QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN		BIT(6)
-+#define   QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN		BIT(7)
-+#define   QCA8K_PORT_HOL_CTRL1_WRED_EN			BIT(8)
-+#define   QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN		BIT(16)
-+
- /* Pkt edit registers */
- #define QCA8K_EGRESS_VLAN(x)				(0x0c70 + (4 * (x / 2)))
- 
-@@ -220,6 +244,7 @@ struct qca8k_match_data {
- };
- 
- struct qca8k_priv {
-+	u8 switch_id;
- 	struct regmap *regmap;
- 	struct mii_bus *bus;
- 	struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
diff --git a/target/linux/generic/backport-5.10/735-v5.14-12-net-dsa-qca8k-limit-port5-delay-to-qca8337.patch b/target/linux/generic/backport-5.10/735-v5.14-12-net-dsa-qca8k-limit-port5-delay-to-qca8337.patch
deleted file mode 100644
index d25edbb1aa4e..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-12-net-dsa-qca8k-limit-port5-delay-to-qca8337.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 5bf9ff3b9fb5ecb67a1a3517b26db3a00f2a2f11 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:02 +0200
-Subject: [PATCH] net: dsa: qca8k: limit port5 delay to qca8337
-
-Limit port5 rx delay to qca8337. This is taken from the legacy QSDK code
-that limits the rx delay on port5 to only this particular switch version,
-on other switch only the tx and rx delay for port0 are needed.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1003,8 +1003,10 @@ qca8k_phylink_mac_config(struct dsa_swit
- 			    QCA8K_PORT_PAD_RGMII_EN |
- 			    QCA8K_PORT_PAD_RGMII_TX_DELAY(QCA8K_MAX_DELAY) |
- 			    QCA8K_PORT_PAD_RGMII_RX_DELAY(QCA8K_MAX_DELAY));
--		qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
--			    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
-+		/* QCA8337 requires to set rgmii rx delay */
-+		if (priv->switch_id == QCA8K_ID_QCA8337)
-+			qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
-+				    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
- 		break;
- 	case PHY_INTERFACE_MODE_SGMII:
- 	case PHY_INTERFACE_MODE_1000BASEX:
diff --git a/target/linux/generic/backport-5.10/735-v5.14-13-net-dsa-qca8k-add-GLOBAL_FC-settings-needed-for-qca8.patch b/target/linux/generic/backport-5.10/735-v5.14-13-net-dsa-qca8k-add-GLOBAL_FC-settings-needed-for-qca8.patch
deleted file mode 100644
index 2b393d242aae..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-13-net-dsa-qca8k-add-GLOBAL_FC-settings-needed-for-qca8.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 0fc57e4b5e39461fc0a54aae0afe4241363a7267 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:03 +0200
-Subject: [PATCH] net: dsa: qca8k: add GLOBAL_FC settings needed for qca8327
-
-Switch qca8327 needs special settings for the GLOBAL_FC_THRES regs.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 10 ++++++++++
- drivers/net/dsa/qca8k.h |  6 ++++++
- 2 files changed, 16 insertions(+)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -930,6 +930,16 @@ qca8k_setup(struct dsa_switch *ds)
- 		}
- 	}
- 
-+	/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
-+	if (priv->switch_id == QCA8K_ID_QCA8327) {
-+		mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |
-+		       QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496);
-+		qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH,
-+			  QCA8K_GLOBAL_FC_GOL_XON_THRES_S |
-+			  QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S,
-+			  mask);
-+	}
-+
- 	/* Setup our port MTUs to match power on defaults */
- 	for (i = 0; i < QCA8K_NUM_PORTS; i++)
- 		priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -168,6 +168,12 @@
- #define   QCA8K_PORT_LOOKUP_STATE			GENMASK(18, 16)
- #define   QCA8K_PORT_LOOKUP_LEARN			BIT(20)
- 
-+#define QCA8K_REG_GLOBAL_FC_THRESH			0x800
-+#define   QCA8K_GLOBAL_FC_GOL_XON_THRES(x)		((x) << 16)
-+#define   QCA8K_GLOBAL_FC_GOL_XON_THRES_S		GENMASK(24, 16)
-+#define   QCA8K_GLOBAL_FC_GOL_XOFF_THRES(x)		((x) << 0)
-+#define   QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S		GENMASK(8, 0)
-+
- #define QCA8K_REG_PORT_HOL_CTRL0(_i)			(0x970 + (_i) * 0x8)
- #define   QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF		GENMASK(3, 0)
- #define   QCA8K_PORT_HOL_CTRL0_EG_PRI0(x)		((x) << 0)
diff --git a/target/linux/generic/backport-5.10/735-v5.14-14-net-dsa-qca8k-add-support-for-switch-rev.patch b/target/linux/generic/backport-5.10/735-v5.14-14-net-dsa-qca8k-add-support-for-switch-rev.patch
deleted file mode 100644
index ed9b8188de57..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-14-net-dsa-qca8k-add-support-for-switch-rev.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From 95ffeaf18b3bb90eeef52cbf7d79ccc9d0345ff5 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:04 +0200
-Subject: [PATCH] net: dsa: qca8k: add support for switch rev
-
-qca8k internal phy driver require some special debug value to be set
-based on the switch revision. Rework the switch id read function to
-also read the chip revision.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 53 ++++++++++++++++++++++++++---------------
- drivers/net/dsa/qca8k.h |  7 ++++--
- 2 files changed, 39 insertions(+), 21 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1588,12 +1588,40 @@ static const struct dsa_switch_ops qca8k
- 	.phylink_mac_link_up	= qca8k_phylink_mac_link_up,
- };
- 
-+static int qca8k_read_switch_id(struct qca8k_priv *priv)
-+{
-+	const struct qca8k_match_data *data;
-+	u32 val;
-+	u8 id;
-+
-+	/* get the switches ID from the compatible */
-+	data = of_device_get_match_data(priv->dev);
-+	if (!data)
-+		return -ENODEV;
-+
-+	val = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
-+	if (val < 0)
-+		return -ENODEV;
-+
-+	id = QCA8K_MASK_CTRL_DEVICE_ID(val & QCA8K_MASK_CTRL_DEVICE_ID_MASK);
-+	if (id != data->id) {
-+		dev_err(priv->dev, "Switch id detected %x but expected %x", id, data->id);
-+		return -ENODEV;
-+	}
-+
-+	priv->switch_id = id;
-+
-+	/* Save revision to communicate to the internal PHY driver */
-+	priv->switch_revision = (val & QCA8K_MASK_CTRL_REV_ID_MASK);
-+
-+	return 0;
-+}
-+
- static int
- qca8k_sw_probe(struct mdio_device *mdiodev)
- {
--	const struct qca8k_match_data *data;
- 	struct qca8k_priv *priv;
--	u32 id;
-+	int ret;
- 
- 	/* allocate the private data struct so that we can probe the switches
- 	 * ID register
-@@ -1619,24 +1647,11 @@ qca8k_sw_probe(struct mdio_device *mdiod
- 		gpiod_set_value_cansleep(priv->reset_gpio, 0);
- 	}
- 
--	/* get the switches ID from the compatible */
--	data = of_device_get_match_data(&mdiodev->dev);
--	if (!data)
--		return -ENODEV;
-+	/* Check the detected switch id */
-+	ret = qca8k_read_switch_id(priv);
-+	if (ret)
-+		return ret;
- 
--	/* read the switches ID register */
--	id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
--	if (id < 0)
--		return id;
--
--	id >>= QCA8K_MASK_CTRL_ID_S;
--	id &= QCA8K_MASK_CTRL_ID_M;
--	if (id != data->id) {
--		dev_err(&mdiodev->dev, "Switch id detected %x but expected %x", id, data->id);
--		return -ENODEV;
--	}
--
--	priv->switch_id = id;
- 	priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
- 	if (!priv->ds)
- 		return -ENOMEM;
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -30,8 +30,10 @@
- 
- /* Global control registers */
- #define QCA8K_REG_MASK_CTRL				0x000
--#define   QCA8K_MASK_CTRL_ID_M				0xff
--#define   QCA8K_MASK_CTRL_ID_S				8
-+#define   QCA8K_MASK_CTRL_REV_ID_MASK			GENMASK(7, 0)
-+#define   QCA8K_MASK_CTRL_REV_ID(x)			((x) >> 0)
-+#define   QCA8K_MASK_CTRL_DEVICE_ID_MASK		GENMASK(15, 8)
-+#define   QCA8K_MASK_CTRL_DEVICE_ID(x)			((x) >> 8)
- #define QCA8K_REG_PORT0_PAD_CTRL			0x004
- #define QCA8K_REG_PORT5_PAD_CTRL			0x008
- #define QCA8K_REG_PORT6_PAD_CTRL			0x00c
-@@ -251,6 +253,7 @@ struct qca8k_match_data {
- 
- struct qca8k_priv {
- 	u8 switch_id;
-+	u8 switch_revision;
- 	struct regmap *regmap;
- 	struct mii_bus *bus;
- 	struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
diff --git a/target/linux/generic/backport-5.10/735-v5.14-15-net-dsa-qca8k-add-ethernet-ports-fallback-to-setup_m.patch b/target/linux/generic/backport-5.10/735-v5.14-15-net-dsa-qca8k-add-ethernet-ports-fallback-to-setup_m.patch
deleted file mode 100644
index 629cb324e096..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-15-net-dsa-qca8k-add-ethernet-ports-fallback-to-setup_m.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 1ee0591a1093c2448642c33433483e9260275f7b Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:05 +0200
-Subject: [PATCH] net: dsa: qca8k: add ethernet-ports fallback to
- setup_mdio_bus
-
-Dsa now also supports ethernet-ports. Add this new binding as a fallback
-if the ports node can't be found.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -719,6 +719,9 @@ qca8k_setup_mdio_bus(struct qca8k_priv *
- 
- 	ports = of_get_child_by_name(priv->dev->of_node, "ports");
- 	if (!ports)
-+		ports = of_get_child_by_name(priv->dev->of_node, "ethernet-ports");
-+
-+	if (!ports)
- 		return -EINVAL;
- 
- 	for_each_available_child_of_node(ports, port) {
diff --git a/target/linux/generic/backport-5.10/735-v5.14-16-net-dsa-qca8k-make-rgmii-delay-configurable.patch b/target/linux/generic/backport-5.10/735-v5.14-16-net-dsa-qca8k-make-rgmii-delay-configurable.patch
deleted file mode 100644
index 6dc2dc6e3ed8..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-16-net-dsa-qca8k-make-rgmii-delay-configurable.patch
+++ /dev/null
@@ -1,188 +0,0 @@
-From e4b9977cee1583da38a6e9118078bb728aaccf7b Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:06 +0200
-Subject: [PATCH] net: dsa: qca8k: make rgmii delay configurable
-
-The legacy qsdk code used a different delay instead of the max value.
-Qsdk use 1 ns for rx and 2 ns for tx. Make these values configurable
-using the standard rx/tx-internal-delay-ps ethernet binding and apply
-qsdk values by default. The connected gmac doesn't add any delay so no
-additional delay is added to tx/rx.
-On this switch the delay is actually in ns so value should be in the
-1000 order. Any value converted from ps to ns by dividing it by 1000
-as the switch max value for delay is 3ns.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 82 ++++++++++++++++++++++++++++++++++++++++-
- drivers/net/dsa/qca8k.h | 11 +++---
- 2 files changed, 86 insertions(+), 7 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -778,6 +778,68 @@ qca8k_setup_mdio_bus(struct qca8k_priv *
- }
- 
- static int
-+qca8k_setup_of_rgmii_delay(struct qca8k_priv *priv)
-+{
-+	struct device_node *port_dn;
-+	phy_interface_t mode;
-+	struct dsa_port *dp;
-+	u32 val;
-+
-+	/* CPU port is already checked */
-+	dp = dsa_to_port(priv->ds, 0);
-+
-+	port_dn = dp->dn;
-+
-+	/* Check if port 0 is set to the correct type */
-+	of_get_phy_mode(port_dn, &mode);
-+	if (mode != PHY_INTERFACE_MODE_RGMII_ID &&
-+	    mode != PHY_INTERFACE_MODE_RGMII_RXID &&
-+	    mode != PHY_INTERFACE_MODE_RGMII_TXID) {
-+		return 0;
-+	}
-+
-+	switch (mode) {
-+	case PHY_INTERFACE_MODE_RGMII_ID:
-+	case PHY_INTERFACE_MODE_RGMII_RXID:
-+		if (of_property_read_u32(port_dn, "rx-internal-delay-ps", &val))
-+			val = 2;
-+		else
-+			/* Switch regs accept value in ns, convert ps to ns */
-+			val = val / 1000;
-+
-+		if (val > QCA8K_MAX_DELAY) {
-+			dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
-+			val = 3;
-+		}
-+
-+		priv->rgmii_rx_delay = val;
-+		/* Stop here if we need to check only for rx delay */
-+		if (mode != PHY_INTERFACE_MODE_RGMII_ID)
-+			break;
-+
-+		fallthrough;
-+	case PHY_INTERFACE_MODE_RGMII_TXID:
-+		if (of_property_read_u32(port_dn, "tx-internal-delay-ps", &val))
-+			val = 1;
-+		else
-+			/* Switch regs accept value in ns, convert ps to ns */
-+			val = val / 1000;
-+
-+		if (val > QCA8K_MAX_DELAY) {
-+			dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
-+			val = 3;
-+		}
-+
-+		priv->rgmii_tx_delay = val;
-+		break;
-+	default:
-+		return 0;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
- qca8k_setup(struct dsa_switch *ds)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-@@ -802,6 +864,10 @@ qca8k_setup(struct dsa_switch *ds)
- 	if (ret)
- 		return ret;
- 
-+	ret = qca8k_setup_of_rgmii_delay(priv);
-+	if (ret)
-+		return ret;
-+
- 	/* Enable CPU Port */
- 	ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
- 			    QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
-@@ -970,6 +1036,8 @@ qca8k_phylink_mac_config(struct dsa_swit
- 	case 0: /* 1st CPU port */
- 		if (state->interface != PHY_INTERFACE_MODE_RGMII &&
- 		    state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
-+		    state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
-+		    state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
- 		    state->interface != PHY_INTERFACE_MODE_SGMII)
- 			return;
- 
-@@ -985,6 +1053,8 @@ qca8k_phylink_mac_config(struct dsa_swit
- 	case 6: /* 2nd CPU port / external PHY */
- 		if (state->interface != PHY_INTERFACE_MODE_RGMII &&
- 		    state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
-+		    state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
-+		    state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
- 		    state->interface != PHY_INTERFACE_MODE_SGMII &&
- 		    state->interface != PHY_INTERFACE_MODE_1000BASEX)
- 			return;
-@@ -1008,14 +1078,18 @@ qca8k_phylink_mac_config(struct dsa_swit
- 		qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN);
- 		break;
- 	case PHY_INTERFACE_MODE_RGMII_ID:
-+	case PHY_INTERFACE_MODE_RGMII_TXID:
-+	case PHY_INTERFACE_MODE_RGMII_RXID:
- 		/* RGMII_ID needs internal delay. This is enabled through
- 		 * PORT5_PAD_CTRL for all ports, rather than individual port
- 		 * registers
- 		 */
- 		qca8k_write(priv, reg,
- 			    QCA8K_PORT_PAD_RGMII_EN |
--			    QCA8K_PORT_PAD_RGMII_TX_DELAY(QCA8K_MAX_DELAY) |
--			    QCA8K_PORT_PAD_RGMII_RX_DELAY(QCA8K_MAX_DELAY));
-+			    QCA8K_PORT_PAD_RGMII_TX_DELAY(priv->rgmii_tx_delay) |
-+			    QCA8K_PORT_PAD_RGMII_RX_DELAY(priv->rgmii_rx_delay) |
-+			    QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
-+			    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
- 		/* QCA8337 requires to set rgmii rx delay */
- 		if (priv->switch_id == QCA8K_ID_QCA8337)
- 			qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
-@@ -1073,6 +1147,8 @@ qca8k_phylink_validate(struct dsa_switch
- 		if (state->interface != PHY_INTERFACE_MODE_NA &&
- 		    state->interface != PHY_INTERFACE_MODE_RGMII &&
- 		    state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
-+		    state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
-+		    state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
- 		    state->interface != PHY_INTERFACE_MODE_SGMII)
- 			goto unsupported;
- 		break;
-@@ -1090,6 +1166,8 @@ qca8k_phylink_validate(struct dsa_switch
- 		if (state->interface != PHY_INTERFACE_MODE_NA &&
- 		    state->interface != PHY_INTERFACE_MODE_RGMII &&
- 		    state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
-+		    state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
-+		    state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
- 		    state->interface != PHY_INTERFACE_MODE_SGMII &&
- 		    state->interface != PHY_INTERFACE_MODE_1000BASEX)
- 			goto unsupported;
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -38,12 +38,11 @@
- #define QCA8K_REG_PORT5_PAD_CTRL			0x008
- #define QCA8K_REG_PORT6_PAD_CTRL			0x00c
- #define   QCA8K_PORT_PAD_RGMII_EN			BIT(26)
--#define   QCA8K_PORT_PAD_RGMII_TX_DELAY(x)		\
--						((0x8 + (x & 0x3)) << 22)
--#define   QCA8K_PORT_PAD_RGMII_RX_DELAY(x)		\
--						((0x10 + (x & 0x3)) << 20)
--#define   QCA8K_MAX_DELAY				3
-+#define   QCA8K_PORT_PAD_RGMII_TX_DELAY(x)		((x) << 22)
-+#define   QCA8K_PORT_PAD_RGMII_RX_DELAY(x)		((x) << 20)
-+#define	  QCA8K_PORT_PAD_RGMII_TX_DELAY_EN		BIT(25)
- #define   QCA8K_PORT_PAD_RGMII_RX_DELAY_EN		BIT(24)
-+#define   QCA8K_MAX_DELAY				3
- #define   QCA8K_PORT_PAD_SGMII_EN			BIT(7)
- #define QCA8K_REG_PWS					0x010
- #define   QCA8K_PWS_SERDES_AEN_DIS			BIT(7)
-@@ -254,6 +253,8 @@ struct qca8k_match_data {
- struct qca8k_priv {
- 	u8 switch_id;
- 	u8 switch_revision;
-+	u8 rgmii_tx_delay;
-+	u8 rgmii_rx_delay;
- 	struct regmap *regmap;
- 	struct mii_bus *bus;
- 	struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
diff --git a/target/linux/generic/backport-5.10/735-v5.14-17-net-dsa-qca8k-clear-MASTER_EN-after-phy-read-write.patch b/target/linux/generic/backport-5.10/735-v5.14-17-net-dsa-qca8k-clear-MASTER_EN-after-phy-read-write.patch
deleted file mode 100644
index 4593da032b00..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-17-net-dsa-qca8k-clear-MASTER_EN-after-phy-read-write.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 63c33bbfeb6842a956a0eb12901e28eb335bdb18 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:07 +0200
-Subject: [PATCH] net: dsa: qca8k: clear MASTER_EN after phy read/write
-
-Clear MDIO_MASTER_EN bit from MDIO_MASTER_CTRL after read/write
-operation. The MDIO_MASTER_EN bit is not reset after read/write
-operation and the next operation can be wrongly interpreted by the
-switch as a mdio operation. This cause a production of wrong/garbage
-data from the switch and underfined bheavior. (random port drop,
-unplugged port flagged with link up, wrong port speed)
-Also on driver remove the MASTER_CTRL can be left set and cause the
-malfunction of any next driver using the mdio device.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 14 ++++++++++++--
- 1 file changed, 12 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -649,8 +649,14 @@ qca8k_mdio_write(struct qca8k_priv *priv
- 	if (ret)
- 		return ret;
- 
--	return qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
--		QCA8K_MDIO_MASTER_BUSY);
-+	ret = qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
-+			      QCA8K_MDIO_MASTER_BUSY);
-+
-+	/* even if the busy_wait timeouts try to clear the MASTER_EN */
-+	qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
-+			QCA8K_MDIO_MASTER_EN);
-+
-+	return ret;
- }
- 
- static int
-@@ -685,6 +691,10 @@ qca8k_mdio_read(struct qca8k_priv *priv,
- 
- 	val &= QCA8K_MDIO_MASTER_DATA_MASK;
- 
-+	/* even if the busy_wait timeouts try to clear the MASTER_EN */
-+	qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
-+			QCA8K_MDIO_MASTER_EN);
-+
- 	return val;
- }
- 
diff --git a/target/linux/generic/backport-5.10/735-v5.14-18-net-dsa-qca8k-dsa-qca8k-protect-MASTER-busy_wait-wit.patch b/target/linux/generic/backport-5.10/735-v5.14-18-net-dsa-qca8k-dsa-qca8k-protect-MASTER-busy_wait-wit.patch
deleted file mode 100644
index b6684d721023..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-18-net-dsa-qca8k-dsa-qca8k-protect-MASTER-busy_wait-wit.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 60df02b6ea4581d72eb7a3ab7204504a54059b72 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:08 +0200
-Subject: [PATCH] net: dsa: qca8k: dsa: qca8k: protect MASTER busy_wait with
- mdio mutex
-
-MDIO_MASTER operation have a dedicated busy wait that is not protected
-by the mdio mutex. This can cause situation where the MASTER operation
-is done and a normal operation is executed between the MASTER read/write
-and the MASTER busy_wait. Rework the qca8k_mdio_read/write function to
-address this issue by binding the lock for the whole MASTER operation
-and not only the mdio read/write common operation.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 68 +++++++++++++++++++++++++++++++++--------
- 1 file changed, 55 insertions(+), 13 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -628,8 +628,31 @@ qca8k_port_to_phy(int port)
- }
- 
- static int
-+qca8k_mdio_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
-+{
-+	u16 r1, r2, page;
-+	u32 val;
-+	int ret;
-+
-+	qca8k_split_addr(reg, &r1, &r2, &page);
-+
-+	ret = read_poll_timeout(qca8k_mii_read32, val, !(val & mask), 0,
-+				QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
-+				priv->bus, 0x10 | r2, r1);
-+
-+	/* Check if qca8k_read has failed for a different reason
-+	 * before returnting -ETIMEDOUT
-+	 */
-+	if (ret < 0 && val < 0)
-+		return val;
-+
-+	return ret;
-+}
-+
-+static int
- qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
- {
-+	u16 r1, r2, page;
- 	u32 phy, val;
- 	int ret;
- 
-@@ -645,12 +668,21 @@ qca8k_mdio_write(struct qca8k_priv *priv
- 	      QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
- 	      QCA8K_MDIO_MASTER_DATA(data);
- 
--	ret = qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
-+	qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
-+
-+	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+
-+	ret = qca8k_set_page(priv->bus, page);
- 	if (ret)
--		return ret;
-+		goto exit;
-+
-+	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
- 
--	ret = qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
--			      QCA8K_MDIO_MASTER_BUSY);
-+	ret = qca8k_mdio_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
-+				   QCA8K_MDIO_MASTER_BUSY);
-+
-+exit:
-+	mutex_unlock(&priv->bus->mdio_lock);
- 
- 	/* even if the busy_wait timeouts try to clear the MASTER_EN */
- 	qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
-@@ -662,6 +694,7 @@ qca8k_mdio_write(struct qca8k_priv *priv
- static int
- qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
- {
-+	u16 r1, r2, page;
- 	u32 phy, val;
- 	int ret;
- 
-@@ -676,21 +709,30 @@ qca8k_mdio_read(struct qca8k_priv *priv,
- 	      QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
- 	      QCA8K_MDIO_MASTER_REG_ADDR(regnum);
- 
--	ret = qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
--	if (ret)
--		return ret;
-+	qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
-+
-+	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
- 
--	ret = qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
--			      QCA8K_MDIO_MASTER_BUSY);
-+	ret = qca8k_set_page(priv->bus, page);
- 	if (ret)
--		return ret;
-+		goto exit;
- 
--	val = qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL);
--	if (val < 0)
--		return val;
-+	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
-+
-+	ret = qca8k_mdio_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
-+				   QCA8K_MDIO_MASTER_BUSY);
-+	if (ret)
-+		goto exit;
- 
-+	val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
- 	val &= QCA8K_MDIO_MASTER_DATA_MASK;
- 
-+exit:
-+	mutex_unlock(&priv->bus->mdio_lock);
-+
-+	if (val >= 0)
-+		val &= QCA8K_MDIO_MASTER_DATA_MASK;
-+
- 	/* even if the busy_wait timeouts try to clear the MASTER_EN */
- 	qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
- 			QCA8K_MDIO_MASTER_EN);
diff --git a/target/linux/generic/backport-5.10/735-v5.14-19-net-dsa-qca8k-enlarge-mdio-delay-and-timeout.patch b/target/linux/generic/backport-5.10/735-v5.14-19-net-dsa-qca8k-enlarge-mdio-delay-and-timeout.patch
deleted file mode 100644
index 30eeed361e66..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-19-net-dsa-qca8k-enlarge-mdio-delay-and-timeout.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 617960d72e93de0f3fa52407e2d39e8c43e73b0a Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:09 +0200
-Subject: [PATCH] net: dsa: qca8k: enlarge mdio delay and timeout
-
-The witch require some extra delay after setting page or the next
-read/write can use still use the old page. Add a delay after the
-set_page function to address this as it's done in QSDK legacy driver.
-Some timeouts were notice with VLAN and phy function, enlarge the
-mdio busy wait timeout to fix these problems.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 1 +
- drivers/net/dsa/qca8k.h | 2 +-
- 2 files changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -143,6 +143,7 @@ qca8k_set_page(struct mii_bus *bus, u16
- 	}
- 
- 	qca8k_current_page = page;
-+	usleep_range(1000, 2000);
- 	return 0;
- }
- 
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -20,7 +20,7 @@
- #define PHY_ID_QCA8337					0x004dd036
- #define QCA8K_ID_QCA8337				0x13
- 
--#define QCA8K_BUSY_WAIT_TIMEOUT				20
-+#define QCA8K_BUSY_WAIT_TIMEOUT				2000
- 
- #define QCA8K_NUM_FDB_RECORDS				2048
- 
diff --git a/target/linux/generic/backport-5.10/735-v5.14-20-net-dsa-qca8k-add-support-for-internal-phy-and-inter.patch b/target/linux/generic/backport-5.10/735-v5.14-20-net-dsa-qca8k-add-support-for-internal-phy-and-inter.patch
deleted file mode 100644
index 88d3c1ef430e..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-20-net-dsa-qca8k-add-support-for-internal-phy-and-inter.patch
+++ /dev/null
@@ -1,267 +0,0 @@
-From 759bafb8a3226326ca357613bc90acf738f80c32 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:10 +0200
-Subject: [PATCH] net: dsa: qca8k: add support for internal phy and internal
- mdio
-
-Add support to setup_mdio_bus for internal phy declaration. Introduce a
-flag to use the legacy port phy mapping by default and use the direct
-mapping if a mdio node is detected in the switch node. Register a
-dedicated mdio internal mdio bus to address the different mapping
-between port and phy if the mdio node is detected.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 112 +++++++++++++++++++++++++++++-----------
- drivers/net/dsa/qca8k.h |   1 +
- 2 files changed, 83 insertions(+), 30 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -11,6 +11,7 @@
- #include <linux/netdevice.h>
- #include <net/dsa.h>
- #include <linux/of_net.h>
-+#include <linux/of_mdio.h>
- #include <linux/of_platform.h>
- #include <linux/if_bridge.h>
- #include <linux/mdio.h>
-@@ -629,7 +630,7 @@ qca8k_port_to_phy(int port)
- }
- 
- static int
--qca8k_mdio_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
-+qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask)
- {
- 	u16 r1, r2, page;
- 	u32 val;
-@@ -639,7 +640,7 @@ qca8k_mdio_busy_wait(struct qca8k_priv *
- 
- 	ret = read_poll_timeout(qca8k_mii_read32, val, !(val & mask), 0,
- 				QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
--				priv->bus, 0x10 | r2, r1);
-+				bus, 0x10 | r2, r1);
- 
- 	/* Check if qca8k_read has failed for a different reason
- 	 * before returnting -ETIMEDOUT
-@@ -651,19 +652,16 @@ qca8k_mdio_busy_wait(struct qca8k_priv *
- }
- 
- static int
--qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
-+qca8k_mdio_write(struct mii_bus *salve_bus, int phy, int regnum, u16 data)
- {
-+	struct qca8k_priv *priv = salve_bus->priv;
- 	u16 r1, r2, page;
--	u32 phy, val;
-+	u32 val;
- 	int ret;
- 
- 	if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
- 		return -EINVAL;
- 
--	/* callee is responsible for not passing bad ports,
--	 * but we still would like to make spills impossible.
--	 */
--	phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
- 	val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
- 	      QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
- 	      QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
-@@ -679,33 +677,29 @@ qca8k_mdio_write(struct qca8k_priv *priv
- 
- 	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
- 
--	ret = qca8k_mdio_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
-+	ret = qca8k_mdio_busy_wait(priv->bus, QCA8K_MDIO_MASTER_CTRL,
- 				   QCA8K_MDIO_MASTER_BUSY);
- 
- exit:
--	mutex_unlock(&priv->bus->mdio_lock);
--
- 	/* even if the busy_wait timeouts try to clear the MASTER_EN */
--	qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
--			QCA8K_MDIO_MASTER_EN);
-+	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, 0);
-+
-+	mutex_unlock(&priv->bus->mdio_lock);
- 
- 	return ret;
- }
- 
- static int
--qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
-+qca8k_mdio_read(struct mii_bus *salve_bus, int phy, int regnum)
- {
-+	struct qca8k_priv *priv = salve_bus->priv;
- 	u16 r1, r2, page;
--	u32 phy, val;
-+	u32 val;
- 	int ret;
- 
- 	if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
- 		return -EINVAL;
- 
--	/* callee is responsible for not passing bad ports,
--	 * but we still would like to make spills impossible.
--	 */
--	phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
- 	val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
- 	      QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
- 	      QCA8K_MDIO_MASTER_REG_ADDR(regnum);
-@@ -720,24 +714,22 @@ qca8k_mdio_read(struct qca8k_priv *priv,
- 
- 	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
- 
--	ret = qca8k_mdio_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
-+	ret = qca8k_mdio_busy_wait(priv->bus, QCA8K_MDIO_MASTER_CTRL,
- 				   QCA8K_MDIO_MASTER_BUSY);
- 	if (ret)
- 		goto exit;
- 
- 	val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
--	val &= QCA8K_MDIO_MASTER_DATA_MASK;
- 
- exit:
-+	/* even if the busy_wait timeouts try to clear the MASTER_EN */
-+	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, 0);
-+
- 	mutex_unlock(&priv->bus->mdio_lock);
- 
- 	if (val >= 0)
- 		val &= QCA8K_MDIO_MASTER_DATA_MASK;
- 
--	/* even if the busy_wait timeouts try to clear the MASTER_EN */
--	qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
--			QCA8K_MDIO_MASTER_EN);
--
- 	return val;
- }
- 
-@@ -746,7 +738,14 @@ qca8k_phy_write(struct dsa_switch *ds, i
- {
- 	struct qca8k_priv *priv = ds->priv;
- 
--	return qca8k_mdio_write(priv, port, regnum, data);
-+	/* Check if the legacy mapping should be used and the
-+	 * port is not correctly mapped to the right PHY in the
-+	 * devicetree
-+	 */
-+	if (priv->legacy_phy_port_mapping)
-+		port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
-+
-+	return qca8k_mdio_write(priv->bus, port, regnum, data);
- }
- 
- static int
-@@ -755,7 +754,14 @@ qca8k_phy_read(struct dsa_switch *ds, in
- 	struct qca8k_priv *priv = ds->priv;
- 	int ret;
- 
--	ret = qca8k_mdio_read(priv, port, regnum);
-+	/* Check if the legacy mapping should be used and the
-+	 * port is not correctly mapped to the right PHY in the
-+	 * devicetree
-+	 */
-+	if (priv->legacy_phy_port_mapping)
-+		port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
-+
-+	ret = qca8k_mdio_read(priv->bus, port, regnum);
- 
- 	if (ret < 0)
- 		return 0xffff;
-@@ -764,10 +770,37 @@ qca8k_phy_read(struct dsa_switch *ds, in
- }
- 
- static int
-+qca8k_mdio_register(struct qca8k_priv *priv, struct device_node *mdio)
-+{
-+	struct dsa_switch *ds = priv->ds;
-+	struct mii_bus *bus;
-+
-+	bus = devm_mdiobus_alloc(ds->dev);
-+
-+	if (!bus)
-+		return -ENOMEM;
-+
-+	bus->priv = (void *)priv;
-+	bus->name = "qca8k slave mii";
-+	bus->read = qca8k_mdio_read;
-+	bus->write = qca8k_mdio_write;
-+	snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d",
-+		 ds->index);
-+
-+	bus->parent = ds->dev;
-+	bus->phy_mask = ~ds->phys_mii_mask;
-+
-+	ds->slave_mii_bus = bus;
-+
-+	return devm_of_mdiobus_register(priv->dev, bus, mdio);
-+}
-+
-+static int
- qca8k_setup_mdio_bus(struct qca8k_priv *priv)
- {
- 	u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
--	struct device_node *ports, *port;
-+	struct device_node *ports, *port, *mdio;
-+	phy_interface_t mode;
- 	int err;
- 
- 	ports = of_get_child_by_name(priv->dev->of_node, "ports");
-@@ -788,7 +821,10 @@ qca8k_setup_mdio_bus(struct qca8k_priv *
- 		if (!dsa_is_user_port(priv->ds, reg))
- 			continue;
- 
--		if (of_property_read_bool(port, "phy-handle"))
-+		of_get_phy_mode(port, &mode);
-+
-+		if (of_property_read_bool(port, "phy-handle") &&
-+		    mode != PHY_INTERFACE_MODE_INTERNAL)
- 			external_mdio_mask |= BIT(reg);
- 		else
- 			internal_mdio_mask |= BIT(reg);
-@@ -825,8 +861,23 @@ qca8k_setup_mdio_bus(struct qca8k_priv *
- 				       QCA8K_MDIO_MASTER_EN);
- 	}
- 
-+	/* Check if the devicetree declare the port:phy mapping */
-+	mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
-+	if (of_device_is_available(mdio)) {
-+		err = qca8k_mdio_register(priv, mdio);
-+		if (err)
-+			of_node_put(mdio);
-+
-+		return err;
-+	}
-+
-+	/* If a mapping can't be found the legacy mapping is used,
-+	 * using the qca8k_port_to_phy function
-+	 */
-+	priv->legacy_phy_port_mapping = true;
- 	priv->ops.phy_read = qca8k_phy_read;
- 	priv->ops.phy_write = qca8k_phy_write;
-+
- 	return 0;
- }
- 
-@@ -1212,7 +1263,8 @@ qca8k_phylink_validate(struct dsa_switch
- 	case 5:
- 		/* Internal PHY */
- 		if (state->interface != PHY_INTERFACE_MODE_NA &&
--		    state->interface != PHY_INTERFACE_MODE_GMII)
-+		    state->interface != PHY_INTERFACE_MODE_GMII &&
-+		    state->interface != PHY_INTERFACE_MODE_INTERNAL)
- 			goto unsupported;
- 		break;
- 	case 6: /* 2nd CPU port / external PHY */
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -255,6 +255,7 @@ struct qca8k_priv {
- 	u8 switch_revision;
- 	u8 rgmii_tx_delay;
- 	u8 rgmii_rx_delay;
-+	bool legacy_phy_port_mapping;
- 	struct regmap *regmap;
- 	struct mii_bus *bus;
- 	struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
diff --git a/target/linux/generic/backport-5.10/735-v5.14-21-devicetree-bindings-dsa-qca8k-Document-internal-mdio.patch b/target/linux/generic/backport-5.10/735-v5.14-21-devicetree-bindings-dsa-qca8k-Document-internal-mdio.patch
deleted file mode 100644
index 6db01b4b4172..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-21-devicetree-bindings-dsa-qca8k-Document-internal-mdio.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 0c994a28e7518f098c84a3049cb2915780db873a Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:11 +0200
-Subject: [PATCH] devicetree: bindings: dsa: qca8k: Document internal mdio
- definition
-
-Document new way of declare mapping of internal PHY to port.
-The new implementation directly declare the PHY connected to the port
-by adding a node in the switch node. The driver detect this and register
-an internal mdiobus using the mapping defined in the mdio node.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../devicetree/bindings/net/dsa/qca8k.txt     | 39 +++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-@@ -21,6 +21,10 @@ described in dsa/dsa.txt. If the QCA8K s
- mdio-bus each subnode describing a port needs to have a valid phandle
- referencing the internal PHY it is connected to. This is because there's no
- N:N mapping of port and PHY id.
-+To declare the internal mdio-bus configuration, declare a mdio node in the
-+switch node and declare the phandle for the port referencing the internal
-+PHY is connected to. In this config a internal mdio-bus is registered and
-+the mdio MASTER is used as communication.
- 
- Don't use mixed external and internal mdio-bus configurations, as this is
- not supported by the hardware.
-@@ -150,26 +154,61 @@ for the internal master mdio-bus configu
- 				port@1 {
- 					reg = <1>;
- 					label = "lan1";
-+					phy-mode = "internal";
-+					phy-handle = <&phy_port1>;
- 				};
- 
- 				port@2 {
- 					reg = <2>;
- 					label = "lan2";
-+					phy-mode = "internal";
-+					phy-handle = <&phy_port2>;
- 				};
- 
- 				port@3 {
- 					reg = <3>;
- 					label = "lan3";
-+					phy-mode = "internal";
-+					phy-handle = <&phy_port3>;
- 				};
- 
- 				port@4 {
- 					reg = <4>;
- 					label = "lan4";
-+					phy-mode = "internal";
-+					phy-handle = <&phy_port4>;
- 				};
- 
- 				port@5 {
- 					reg = <5>;
- 					label = "wan";
-+					phy-mode = "internal";
-+					phy-handle = <&phy_port5>;
-+				};
-+			};
-+
-+			mdio {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				phy_port1: phy@0 {
-+					reg = <0>;
-+				};
-+
-+				phy_port2: phy@1 {
-+					reg = <1>;
-+				};
-+
-+				phy_port3: phy@2 {
-+					reg = <2>;
-+				};
-+
-+				phy_port4: phy@3 {
-+					reg = <3>;
-+				};
-+
-+				phy_port5: phy@4 {
-+					reg = <4>;
- 				};
- 			};
- 		};
diff --git a/target/linux/generic/backport-5.10/735-v5.14-22-net-dsa-qca8k-improve-internal-mdio-read-write-bus-a.patch b/target/linux/generic/backport-5.10/735-v5.14-22-net-dsa-qca8k-improve-internal-mdio-read-write-bus-a.patch
deleted file mode 100644
index da8d5b346212..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-22-net-dsa-qca8k-improve-internal-mdio-read-write-bus-a.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From b7ebac354d54f1657bb89b7a7ca149db50203e6a Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:12 +0200
-Subject: [PATCH] net: dsa: qca8k: improve internal mdio read/write bus access
-
-Improve the internal mdio read/write bus access by caching the value
-without accessing it for every read/write.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 28 +++++++++++++++-------------
- 1 file changed, 15 insertions(+), 13 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -655,6 +655,7 @@ static int
- qca8k_mdio_write(struct mii_bus *salve_bus, int phy, int regnum, u16 data)
- {
- 	struct qca8k_priv *priv = salve_bus->priv;
-+	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 	u32 val;
- 	int ret;
-@@ -669,22 +670,22 @@ qca8k_mdio_write(struct mii_bus *salve_b
- 
- 	qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
- 
--	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
- 
--	ret = qca8k_set_page(priv->bus, page);
-+	ret = qca8k_set_page(bus, page);
- 	if (ret)
- 		goto exit;
- 
--	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
-+	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
- 
--	ret = qca8k_mdio_busy_wait(priv->bus, QCA8K_MDIO_MASTER_CTRL,
-+	ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
- 				   QCA8K_MDIO_MASTER_BUSY);
- 
- exit:
- 	/* even if the busy_wait timeouts try to clear the MASTER_EN */
--	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, 0);
-+	qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
- 
--	mutex_unlock(&priv->bus->mdio_lock);
-+	mutex_unlock(&bus->mdio_lock);
- 
- 	return ret;
- }
-@@ -693,6 +694,7 @@ static int
- qca8k_mdio_read(struct mii_bus *salve_bus, int phy, int regnum)
- {
- 	struct qca8k_priv *priv = salve_bus->priv;
-+	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 	u32 val;
- 	int ret;
-@@ -706,26 +708,26 @@ qca8k_mdio_read(struct mii_bus *salve_bu
- 
- 	qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
- 
--	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
- 
--	ret = qca8k_set_page(priv->bus, page);
-+	ret = qca8k_set_page(bus, page);
- 	if (ret)
- 		goto exit;
- 
--	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
-+	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
- 
--	ret = qca8k_mdio_busy_wait(priv->bus, QCA8K_MDIO_MASTER_CTRL,
-+	ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
- 				   QCA8K_MDIO_MASTER_BUSY);
- 	if (ret)
- 		goto exit;
- 
--	val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1);
-+	val = qca8k_mii_read32(bus, 0x10 | r2, r1);
- 
- exit:
- 	/* even if the busy_wait timeouts try to clear the MASTER_EN */
--	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, 0);
-+	qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
- 
--	mutex_unlock(&priv->bus->mdio_lock);
-+	mutex_unlock(&bus->mdio_lock);
- 
- 	if (val >= 0)
- 		val &= QCA8K_MDIO_MASTER_DATA_MASK;
diff --git a/target/linux/generic/backport-5.10/735-v5.14-23-net-dsa-qca8k-pass-switch_revision-info-to-phy-dev_f.patch b/target/linux/generic/backport-5.10/735-v5.14-23-net-dsa-qca8k-pass-switch_revision-info-to-phy-dev_f.patch
deleted file mode 100644
index 1179cf152d37..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-23-net-dsa-qca8k-pass-switch_revision-info-to-phy-dev_f.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From a46aec02bc06ac2c33f326339e4ef88c735dc30d Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:13 +0200
-Subject: [PATCH] net: dsa: qca8k: pass switch_revision info to phy dev_flags
-
-Define get_phy_flags to pass switch_Revision needed to tweak the
-internal PHY with debug values based on the revision.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1740,6 +1740,22 @@ qca8k_port_vlan_del(struct dsa_switch *d
- 	return ret;
- }
- 
-+static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port)
-+{
-+	struct qca8k_priv *priv = ds->priv;
-+
-+	/* Communicate to the phy internal driver the switch revision.
-+	 * Based on the switch revision different values needs to be
-+	 * set to the dbg and mmd reg on the phy.
-+	 * The first 2 bit are used to communicate the switch revision
-+	 * to the phy driver.
-+	 */
-+	if (port > 0 && port < 6)
-+		return priv->switch_revision;
-+
-+	return 0;
-+}
-+
- static enum dsa_tag_protocol
- qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
- 		       enum dsa_tag_protocol mp)
-@@ -1774,6 +1790,7 @@ static const struct dsa_switch_ops qca8k
- 	.phylink_mac_config	= qca8k_phylink_mac_config,
- 	.phylink_mac_link_down	= qca8k_phylink_mac_link_down,
- 	.phylink_mac_link_up	= qca8k_phylink_mac_link_up,
-+	.get_phy_flags		= qca8k_get_phy_flags,
- };
- 
- static int qca8k_read_switch_id(struct qca8k_priv *priv)
diff --git a/target/linux/generic/backport-5.10/735-v5.14-25-net-phy-add-support-for-qca8k-switch-internal-PHY-in.patch b/target/linux/generic/backport-5.10/735-v5.14-25-net-phy-add-support-for-qca8k-switch-internal-PHY-in.patch
deleted file mode 100644
index 0b03c78bdc82..000000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-25-net-phy-add-support-for-qca8k-switch-internal-PHY-in.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-From 272833b9b3b3969be7a91839121d86662c8c4253 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:15 +0200
-Subject: [PATCH] net: phy: add support for qca8k switch internal PHY in at803x
-
-Since the at803x share the same regs, it's assumed they are based on the
-same implementation. Make it part of the at803x PHY driver to skip
-having redudant code.
-Add initial support for qca8k internal PHYs. The internal PHYs requires
-special mmd and debug values to be set based on the switch revision
-passwd using the dev_flags. Supports output of idle, receive and eee_wake
-errors stats.
-Some debug values sets can't be translated as the documentation lacks any
-reference about them.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/Kconfig  |   5 +-
- drivers/net/phy/at803x.c | 132 ++++++++++++++++++++++++++++++++++++++-
- 2 files changed, 134 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -235,10 +235,11 @@ config NXP_TJA11XX_PHY
- 	  Currently supports the NXP TJA1100 and TJA1101 PHY.
- 
- config AT803X_PHY
--	tristate "Qualcomm Atheros AR803X PHYs"
-+	tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs"
- 	depends on REGULATOR
- 	help
--	  Currently supports the AR8030, AR8031, AR8033 and AR8035 model
-+	  Currently supports the AR8030, AR8031, AR8033, AR8035 and internal
-+	  QCA8337(Internal qca8k PHY) model
- 
- config QSEMI_PHY
- 	tristate "Quality Semiconductor PHYs"
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -92,10 +92,16 @@
- #define AT803X_DEBUG_REG_5			0x05
- #define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
- 
-+#define AT803X_DEBUG_REG_3C			0x3C
-+
-+#define AT803X_DEBUG_REG_3D			0x3D
-+
- #define AT803X_DEBUG_REG_1F			0x1F
- #define AT803X_DEBUG_PLL_ON			BIT(2)
- #define AT803X_DEBUG_RGMII_1V8			BIT(3)
- 
-+#define MDIO_AZ_DEBUG				0x800D
-+
- /* AT803x supports either the XTAL input pad, an internal PLL or the
-  * DSP as clock reference for the clock output pad. The XTAL reference
-  * is only used for 25 MHz output, all other frequencies need the PLL.
-@@ -142,10 +148,34 @@
- #define AT803X_PAGE_FIBER		0
- #define AT803X_PAGE_COPPER		1
- 
-+#define QCA8327_PHY_ID				0x004dd034
-+#define QCA8337_PHY_ID				0x004dd036
-+#define QCA8K_PHY_ID_MASK			0xffffffff
-+
-+#define QCA8K_DEVFLAGS_REVISION_MASK		GENMASK(2, 0)
-+
- MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
- MODULE_LICENSE("GPL");
- 
-+enum stat_access_type {
-+	PHY,
-+	MMD
-+};
-+
-+struct at803x_hw_stat {
-+	const char *string;
-+	u8 reg;
-+	u32 mask;
-+	enum stat_access_type access_type;
-+};
-+
-+static struct at803x_hw_stat at803x_hw_stats[] = {
-+	{ "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
-+	{ "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
-+	{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
-+};
-+
- struct at803x_priv {
- 	int flags;
- #define AT803X_KEEP_PLL_ENABLED	BIT(0)	/* don't turn off internal PLL */
-@@ -154,6 +184,7 @@ struct at803x_priv {
- 	struct regulator_dev *vddio_rdev;
- 	struct regulator_dev *vddh_rdev;
- 	struct regulator *vddio;
-+	u64 stats[ARRAY_SIZE(at803x_hw_stats)];
- };
- 
- struct at803x_context {
-@@ -165,6 +196,17 @@ struct at803x_context {
- 	u16 led_control;
- };
- 
-+static int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data)
-+{
-+	int ret;
-+
-+	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
-+	if (ret < 0)
-+		return ret;
-+
-+	return phy_write(phydev, AT803X_DEBUG_DATA, data);
-+}
-+
- static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
- {
- 	int ret;
-@@ -327,6 +369,53 @@ static void at803x_get_wol(struct phy_de
- 		wol->wolopts |= WAKE_MAGIC;
- }
- 
-+static int at803x_get_sset_count(struct phy_device *phydev)
-+{
-+	return ARRAY_SIZE(at803x_hw_stats);
-+}
-+
-+static void at803x_get_strings(struct phy_device *phydev, u8 *data)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++) {
-+		strscpy(data + i * ETH_GSTRING_LEN,
-+			at803x_hw_stats[i].string, ETH_GSTRING_LEN);
-+	}
-+}
-+
-+static u64 at803x_get_stat(struct phy_device *phydev, int i)
-+{
-+	struct at803x_hw_stat stat = at803x_hw_stats[i];
-+	struct at803x_priv *priv = phydev->priv;
-+	int val;
-+	u64 ret;
-+
-+	if (stat.access_type == MMD)
-+		val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg);
-+	else
-+		val = phy_read(phydev, stat.reg);
-+
-+	if (val < 0) {
-+		ret = U64_MAX;
-+	} else {
-+		val = val & stat.mask;
-+		priv->stats[i] += val;
-+		ret = priv->stats[i];
-+	}
-+
-+	return ret;
-+}
-+
-+static void at803x_get_stats(struct phy_device *phydev,
-+			     struct ethtool_stats *stats, u64 *data)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++)
-+		data[i] = at803x_get_stat(phydev, i);
-+}
-+
- static int at803x_suspend(struct phy_device *phydev)
- {
- 	int value;
-@@ -1130,6 +1219,34 @@ static int at803x_cable_test_start(struc
- 	return 0;
- }
- 
-+static int qca83xx_config_init(struct phy_device *phydev)
-+{
-+	u8 switch_revision;
-+
-+	switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK;
-+
-+	switch (switch_revision) {
-+	case 1:
-+		/* For 100M waveform */
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_0, 0x02ea);
-+		/* Turn on Gigabit clock */
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x68a0);
-+		break;
-+
-+	case 2:
-+		phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0);
-+		fallthrough;
-+	case 4:
-+		phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x6860);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_5, 0x2c46);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000);
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
- static struct phy_driver at803x_driver[] = {
- {
- 	/* Qualcomm Atheros AR8035 */
-@@ -1226,7 +1343,20 @@ static struct phy_driver at803x_driver[]
- 	.read_status		= at803x_read_status,
- 	.soft_reset		= genphy_soft_reset,
- 	.config_aneg		= at803x_config_aneg,
--} };
-+}, {
-+	/* QCA8337 */
-+	.phy_id = QCA8337_PHY_ID,
-+	.phy_id_mask = QCA8K_PHY_ID_MASK,
-+	.name = "QCA PHY 8337",
-+	/* PHY_GBIT_FEATURES */
-+	.probe = at803x_probe,
-+	.flags = PHY_IS_INTERNAL,
-+	.config_init = qca83xx_config_init,
-+	.soft_reset = genphy_soft_reset,
-+	.get_sset_count = at803x_get_sset_count,
-+	.get_strings = at803x_get_strings,
-+	.get_stats = at803x_get_stats,
-+}, };
- 
- module_phy_driver(at803x_driver);
- 
diff --git a/target/linux/generic/backport-5.10/736-v5.14-net-dsa-qca8k-fix-missing-unlock-on-error-in-qca8k-vlan.patch b/target/linux/generic/backport-5.10/736-v5.14-net-dsa-qca8k-fix-missing-unlock-on-error-in-qca8k-vlan.patch
deleted file mode 100644
index a68e3b1821c9..000000000000
--- a/target/linux/generic/backport-5.10/736-v5.14-net-dsa-qca8k-fix-missing-unlock-on-error-in-qca8k-vlan.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 0d56e5c191b197e1d30a0a4c92628836dafced0f Mon Sep 17 00:00:00 2001
-From: Wei Yongjun <weiyongjun1@huawei.com>
-Date: Tue, 18 May 2021 11:24:13 +0000
-Subject: [PATCH] net: dsa: qca8k: fix missing unlock on error in
- qca8k_vlan_(add|del)
-
-Add the missing unlock before return from function qca8k_vlan_add()
-and qca8k_vlan_del() in the error handling case.
-
-Fixes: 028f5f8ef44f ("net: dsa: qca8k: handle error with qca8k_read operation")
-Reported-by: Hulk Robot <hulkci@huawei.com>
-Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 16 ++++++++++------
- 1 file changed, 10 insertions(+), 6 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -506,8 +506,10 @@ qca8k_vlan_add(struct qca8k_priv *priv,
- 		goto out;
- 
- 	reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0);
--	if (reg < 0)
--		return reg;
-+	if (reg < 0) {
-+		ret = reg;
-+		goto out;
-+	}
- 	reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN;
- 	reg &= ~(QCA8K_VTU_FUNC0_EG_MODE_MASK << QCA8K_VTU_FUNC0_EG_MODE_S(port));
- 	if (untagged)
-@@ -519,7 +521,7 @@ qca8k_vlan_add(struct qca8k_priv *priv,
- 
- 	ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
- 	if (ret)
--		return ret;
-+		goto out;
- 	ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
- 
- out:
-@@ -541,8 +543,10 @@ qca8k_vlan_del(struct qca8k_priv *priv,
- 		goto out;
- 
- 	reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0);
--	if (reg < 0)
--		return reg;
-+	if (reg < 0) {
-+		ret = reg;
-+		goto out;
-+	}
- 	reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port));
- 	reg |= QCA8K_VTU_FUNC0_EG_MODE_NOT <<
- 			QCA8K_VTU_FUNC0_EG_MODE_S(port);
-@@ -564,7 +568,7 @@ qca8k_vlan_del(struct qca8k_priv *priv,
- 	} else {
- 		ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
- 		if (ret)
--			return ret;
-+			goto out;
- 		ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
- 	}
- 
diff --git a/target/linux/generic/backport-5.10/737-v5.14-01-net-dsa-qca8k-check-return-value-of-read-functions-c.patch b/target/linux/generic/backport-5.10/737-v5.14-01-net-dsa-qca8k-check-return-value-of-read-functions-c.patch
deleted file mode 100644
index 451b0e9446a6..000000000000
--- a/target/linux/generic/backport-5.10/737-v5.14-01-net-dsa-qca8k-check-return-value-of-read-functions-c.patch
+++ /dev/null
@@ -1,348 +0,0 @@
-From 7c9896e37807862e276064dd9331860f5d27affc Mon Sep 17 00:00:00 2001
-From: Yang Yingliang <yangyingliang@huawei.com>
-Date: Sat, 29 May 2021 11:04:38 +0800
-Subject: [PATCH] net: dsa: qca8k: check return value of read functions
- correctly
-
-Current return type of qca8k_mii_read32() and qca8k_read() are
-unsigned, it can't be negative, so the return value check is
-unuseful. For check the return value correctly, change return
-type of the read functions and add a output parameter to store
-the read value.
-
-Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/qca8k.c | 130 +++++++++++++++++++---------------------
- 1 file changed, 60 insertions(+), 70 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -89,26 +89,26 @@ qca8k_split_addr(u32 regaddr, u16 *r1, u
- 	*page = regaddr & 0x3ff;
- }
- 
--static u32
--qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum)
-+static int
-+qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
- {
--	u32 val;
- 	int ret;
- 
- 	ret = bus->read(bus, phy_id, regnum);
- 	if (ret >= 0) {
--		val = ret;
-+		*val = ret;
- 		ret = bus->read(bus, phy_id, regnum + 1);
--		val |= ret << 16;
-+		*val |= ret << 16;
- 	}
- 
- 	if (ret < 0) {
- 		dev_err_ratelimited(&bus->dev,
- 				    "failed to read qca8k 32bit register\n");
-+		*val = 0;
- 		return ret;
- 	}
- 
--	return val;
-+	return 0;
- }
- 
- static void
-@@ -148,26 +148,26 @@ qca8k_set_page(struct mii_bus *bus, u16
- 	return 0;
- }
- 
--static u32
--qca8k_read(struct qca8k_priv *priv, u32 reg)
-+static int
-+qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val)
- {
- 	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
--	u32 val;
-+	int ret;
- 
- 	qca8k_split_addr(reg, &r1, &r2, &page);
- 
- 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
- 
--	val = qca8k_set_page(bus, page);
--	if (val < 0)
-+	ret = qca8k_set_page(bus, page);
-+	if (ret < 0)
- 		goto exit;
- 
--	val = qca8k_mii_read32(bus, 0x10 | r2, r1);
-+	ret = qca8k_mii_read32(bus, 0x10 | r2, r1, val);
- 
- exit:
- 	mutex_unlock(&bus->mdio_lock);
--	return val;
-+	return ret;
- }
- 
- static int
-@@ -208,11 +208,9 @@ qca8k_rmw(struct qca8k_priv *priv, u32 r
- 	if (ret < 0)
- 		goto exit;
- 
--	val = qca8k_mii_read32(bus, 0x10 | r2, r1);
--	if (val < 0) {
--		ret = val;
-+	ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
-+	if (ret < 0)
- 		goto exit;
--	}
- 
- 	val &= ~mask;
- 	val |= write_val;
-@@ -240,15 +238,8 @@ static int
- qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
--	int ret;
--
--	ret = qca8k_read(priv, reg);
--	if (ret < 0)
--		return ret;
--
--	*val = ret;
- 
--	return 0;
-+	return qca8k_read(priv, reg, val);
- }
- 
- static int
-@@ -296,18 +287,18 @@ static struct regmap_config qca8k_regmap
- static int
- qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
- {
-+	int ret, ret1;
- 	u32 val;
--	int ret;
- 
--	ret = read_poll_timeout(qca8k_read, val, !(val & mask),
-+	ret = read_poll_timeout(qca8k_read, ret1, !(val & mask),
- 				0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
--				priv, reg);
-+				priv, reg, &val);
- 
- 	/* Check if qca8k_read has failed for a different reason
- 	 * before returning -ETIMEDOUT
- 	 */
--	if (ret < 0 && val < 0)
--		return val;
-+	if (ret < 0 && ret1 < 0)
-+		return ret1;
- 
- 	return ret;
- }
-@@ -316,13 +307,13 @@ static int
- qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb)
- {
- 	u32 reg[4], val;
--	int i;
-+	int i, ret;
- 
- 	/* load the ARL table into an array */
- 	for (i = 0; i < 4; i++) {
--		val = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4));
--		if (val < 0)
--			return val;
-+		ret = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4), &val);
-+		if (ret < 0)
-+			return ret;
- 
- 		reg[i] = val;
- 	}
-@@ -396,9 +387,9 @@ qca8k_fdb_access(struct qca8k_priv *priv
- 
- 	/* Check for table full violation when adding an entry */
- 	if (cmd == QCA8K_FDB_LOAD) {
--		reg = qca8k_read(priv, QCA8K_REG_ATU_FUNC);
--		if (reg < 0)
--			return reg;
-+		ret = qca8k_read(priv, QCA8K_REG_ATU_FUNC, &reg);
-+		if (ret < 0)
-+			return ret;
- 		if (reg & QCA8K_ATU_FUNC_FULL)
- 			return -1;
- 	}
-@@ -477,9 +468,9 @@ qca8k_vlan_access(struct qca8k_priv *pri
- 
- 	/* Check for table full violation when adding an entry */
- 	if (cmd == QCA8K_VLAN_LOAD) {
--		reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC1);
--		if (reg < 0)
--			return reg;
-+		ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC1, &reg);
-+		if (ret < 0)
-+			return ret;
- 		if (reg & QCA8K_VTU_FUNC1_FULL)
- 			return -ENOMEM;
- 	}
-@@ -505,11 +496,9 @@ qca8k_vlan_add(struct qca8k_priv *priv,
- 	if (ret < 0)
- 		goto out;
- 
--	reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0);
--	if (reg < 0) {
--		ret = reg;
-+	ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, &reg);
-+	if (ret < 0)
- 		goto out;
--	}
- 	reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN;
- 	reg &= ~(QCA8K_VTU_FUNC0_EG_MODE_MASK << QCA8K_VTU_FUNC0_EG_MODE_S(port));
- 	if (untagged)
-@@ -542,11 +531,9 @@ qca8k_vlan_del(struct qca8k_priv *priv,
- 	if (ret < 0)
- 		goto out;
- 
--	reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0);
--	if (reg < 0) {
--		ret = reg;
-+	ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, &reg);
-+	if (ret < 0)
- 		goto out;
--	}
- 	reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port));
- 	reg |= QCA8K_VTU_FUNC0_EG_MODE_NOT <<
- 			QCA8K_VTU_FUNC0_EG_MODE_S(port);
-@@ -638,19 +625,19 @@ qca8k_mdio_busy_wait(struct mii_bus *bus
- {
- 	u16 r1, r2, page;
- 	u32 val;
--	int ret;
-+	int ret, ret1;
- 
- 	qca8k_split_addr(reg, &r1, &r2, &page);
- 
--	ret = read_poll_timeout(qca8k_mii_read32, val, !(val & mask), 0,
-+	ret = read_poll_timeout(qca8k_mii_read32, ret1, !(val & mask), 0,
- 				QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
--				bus, 0x10 | r2, r1);
-+				bus, 0x10 | r2, r1, &val);
- 
- 	/* Check if qca8k_read has failed for a different reason
- 	 * before returnting -ETIMEDOUT
- 	 */
--	if (ret < 0 && val < 0)
--		return val;
-+	if (ret < 0 && ret1 < 0)
-+		return ret1;
- 
- 	return ret;
- }
-@@ -725,7 +712,7 @@ qca8k_mdio_read(struct mii_bus *salve_bu
- 	if (ret)
- 		goto exit;
- 
--	val = qca8k_mii_read32(bus, 0x10 | r2, r1);
-+	ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
- 
- exit:
- 	/* even if the busy_wait timeouts try to clear the MASTER_EN */
-@@ -733,10 +720,10 @@ exit:
- 
- 	mutex_unlock(&bus->mdio_lock);
- 
--	if (val >= 0)
--		val &= QCA8K_MDIO_MASTER_DATA_MASK;
-+	if (ret >= 0)
-+		ret = val & QCA8K_MDIO_MASTER_DATA_MASK;
- 
--	return val;
-+	return ret;
- }
- 
- static int
-@@ -1211,7 +1198,7 @@ qca8k_phylink_mac_config(struct dsa_swit
- 		qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
- 
- 		/* Enable/disable SerDes auto-negotiation as necessary */
--		val = qca8k_read(priv, QCA8K_REG_PWS);
-+		qca8k_read(priv, QCA8K_REG_PWS, &val);
- 		if (phylink_autoneg_inband(mode))
- 			val &= ~QCA8K_PWS_SERDES_AEN_DIS;
- 		else
-@@ -1219,7 +1206,7 @@ qca8k_phylink_mac_config(struct dsa_swit
- 		qca8k_write(priv, QCA8K_REG_PWS, val);
- 
- 		/* Configure the SGMII parameters */
--		val = qca8k_read(priv, QCA8K_REG_SGMII_CTRL);
-+		qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
- 
- 		val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
- 			QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD;
-@@ -1314,10 +1301,11 @@ qca8k_phylink_mac_link_state(struct dsa_
- {
- 	struct qca8k_priv *priv = ds->priv;
- 	u32 reg;
-+	int ret;
- 
--	reg = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port));
--	if (reg < 0)
--		return reg;
-+	ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), &reg);
-+	if (ret < 0)
-+		return ret;
- 
- 	state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP);
- 	state->an_complete = state->link;
-@@ -1419,19 +1407,20 @@ qca8k_get_ethtool_stats(struct dsa_switc
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
- 	const struct qca8k_mib_desc *mib;
- 	u32 reg, i, val;
--	u64 hi;
-+	u64 hi = 0;
-+	int ret;
- 
- 	for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
- 		mib = &ar8327_mib[i];
- 		reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset;
- 
--		val = qca8k_read(priv, reg);
--		if (val < 0)
-+		ret = qca8k_read(priv, reg, &val);
-+		if (ret < 0)
- 			continue;
- 
- 		if (mib->size == 2) {
--			hi = qca8k_read(priv, reg + 4);
--			if (hi < 0)
-+			ret = qca8k_read(priv, reg + 4, (u32 *)&hi);
-+			if (ret < 0)
- 				continue;
- 		}
- 
-@@ -1459,7 +1448,7 @@ qca8k_set_mac_eee(struct dsa_switch *ds,
- 	int ret;
- 
- 	mutex_lock(&priv->reg_mutex);
--	reg = qca8k_read(priv, QCA8K_REG_EEE_CTRL);
-+	ret = qca8k_read(priv, QCA8K_REG_EEE_CTRL, &reg);
- 	if (reg < 0) {
- 		ret = reg;
- 		goto exit;
-@@ -1802,14 +1791,15 @@ static int qca8k_read_switch_id(struct q
- 	const struct qca8k_match_data *data;
- 	u32 val;
- 	u8 id;
-+	int ret;
- 
- 	/* get the switches ID from the compatible */
- 	data = of_device_get_match_data(priv->dev);
- 	if (!data)
- 		return -ENODEV;
- 
--	val = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
--	if (val < 0)
-+	ret = qca8k_read(priv, QCA8K_REG_MASK_CTRL, &val);
-+	if (ret < 0)
- 		return -ENODEV;
- 
- 	id = QCA8K_MASK_CTRL_DEVICE_ID(val & QCA8K_MASK_CTRL_DEVICE_ID_MASK);
diff --git a/target/linux/generic/backport-5.10/737-v5.14-02-net-dsa-qca8k-add-missing-check-return-value-in-qca8.patch b/target/linux/generic/backport-5.10/737-v5.14-02-net-dsa-qca8k-add-missing-check-return-value-in-qca8.patch
deleted file mode 100644
index d20da5b85eef..000000000000
--- a/target/linux/generic/backport-5.10/737-v5.14-02-net-dsa-qca8k-add-missing-check-return-value-in-qca8.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 9fe99de01440d9ede74d447ac76e9c445d8daae9 Mon Sep 17 00:00:00 2001
-From: Yang Yingliang <yangyingliang@huawei.com>
-Date: Sat, 29 May 2021 11:04:39 +0800
-Subject: [PATCH] net: dsa: qca8k: add missing check return value in
- qca8k_phylink_mac_config()
-
-Now we can check qca8k_read() return value correctly, so if
-it fails, we need return directly.
-
-Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/qca8k.c | 9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1128,6 +1128,7 @@ qca8k_phylink_mac_config(struct dsa_swit
- {
- 	struct qca8k_priv *priv = ds->priv;
- 	u32 reg, val;
-+	int ret;
- 
- 	switch (port) {
- 	case 0: /* 1st CPU port */
-@@ -1198,7 +1199,9 @@ qca8k_phylink_mac_config(struct dsa_swit
- 		qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
- 
- 		/* Enable/disable SerDes auto-negotiation as necessary */
--		qca8k_read(priv, QCA8K_REG_PWS, &val);
-+		ret = qca8k_read(priv, QCA8K_REG_PWS, &val);
-+		if (ret)
-+			return;
- 		if (phylink_autoneg_inband(mode))
- 			val &= ~QCA8K_PWS_SERDES_AEN_DIS;
- 		else
-@@ -1206,7 +1209,9 @@ qca8k_phylink_mac_config(struct dsa_swit
- 		qca8k_write(priv, QCA8K_REG_PWS, val);
- 
- 		/* Configure the SGMII parameters */
--		qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
-+		ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
-+		if (ret)
-+			return;
- 
- 		val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
- 			QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD;
diff --git a/target/linux/generic/backport-5.10/738-v5.14-01-net-dsa-qca8k-fix-an-endian-bug-in-qca8k-get-ethtool.patch b/target/linux/generic/backport-5.10/738-v5.14-01-net-dsa-qca8k-fix-an-endian-bug-in-qca8k-get-ethtool.patch
deleted file mode 100644
index aed97d0549bd..000000000000
--- a/target/linux/generic/backport-5.10/738-v5.14-01-net-dsa-qca8k-fix-an-endian-bug-in-qca8k-get-ethtool.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From aa3d020b22cb844ab7bdbb9e5d861a64666e2b74 Mon Sep 17 00:00:00 2001
-From: Dan Carpenter <dan.carpenter@oracle.com>
-Date: Wed, 9 Jun 2021 12:52:12 +0300
-Subject: [PATCH] net: dsa: qca8k: fix an endian bug in
- qca8k_get_ethtool_stats()
-
-The "hi" variable is a u64 but the qca8k_read() writes to the top 32
-bits of it.  That will work on little endian systems but it's a bit
-subtle.  It's cleaner to make declare "hi" as a u32.  We will still need
-to cast it when we shift it later on in the function but that's fine.
-
-Fixes: 7c9896e37807 ("net: dsa: qca8k: check return value of read functions correctly")
-Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1412,7 +1412,7 @@ qca8k_get_ethtool_stats(struct dsa_switc
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
- 	const struct qca8k_mib_desc *mib;
- 	u32 reg, i, val;
--	u64 hi = 0;
-+	u32 hi = 0;
- 	int ret;
- 
- 	for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
-@@ -1424,14 +1424,14 @@ qca8k_get_ethtool_stats(struct dsa_switc
- 			continue;
- 
- 		if (mib->size == 2) {
--			ret = qca8k_read(priv, reg + 4, (u32 *)&hi);
-+			ret = qca8k_read(priv, reg + 4, &hi);
- 			if (ret < 0)
- 				continue;
- 		}
- 
- 		data[i] = val;
- 		if (mib->size == 2)
--			data[i] |= hi << 32;
-+			data[i] |= (u64)hi << 32;
- 	}
- }
- 
diff --git a/target/linux/generic/backport-5.10/738-v5.14-02-net-dsa-qca8k-check-the-correct-variable-in-qca8k-se.patch b/target/linux/generic/backport-5.10/738-v5.14-02-net-dsa-qca8k-check-the-correct-variable-in-qca8k-se.patch
deleted file mode 100644
index c58f79cd8b81..000000000000
--- a/target/linux/generic/backport-5.10/738-v5.14-02-net-dsa-qca8k-check-the-correct-variable-in-qca8k-se.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 3d0167f2a627528032821cdeb78b4eab0510460f Mon Sep 17 00:00:00 2001
-From: Dan Carpenter <dan.carpenter@oracle.com>
-Date: Wed, 9 Jun 2021 12:53:03 +0300
-Subject: [PATCH] net: dsa: qca8k: check the correct variable in
- qca8k_set_mac_eee()
-
-This code check "reg" but "ret" was intended so the error handling will
-never trigger.
-
-Fixes: 7c9896e37807 ("net: dsa: qca8k: check return value of read functions correctly")
-Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1454,10 +1454,8 @@ qca8k_set_mac_eee(struct dsa_switch *ds,
- 
- 	mutex_lock(&priv->reg_mutex);
- 	ret = qca8k_read(priv, QCA8K_REG_EEE_CTRL, &reg);
--	if (reg < 0) {
--		ret = reg;
-+	if (ret < 0)
- 		goto exit;
--	}
- 
- 	if (eee->eee_enabled)
- 		reg |= lpi_en;
diff --git a/target/linux/generic/backport-5.10/739-v5.15-net-dsa-qca8k-fix-kernel-panic-with-legacy-mdio-mapping.patch b/target/linux/generic/backport-5.10/739-v5.15-net-dsa-qca8k-fix-kernel-panic-with-legacy-mdio-mapping.patch
deleted file mode 100644
index 1e293d3a0bef..000000000000
--- a/target/linux/generic/backport-5.10/739-v5.15-net-dsa-qca8k-fix-kernel-panic-with-legacy-mdio-mapping.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From ce062a0adbfe933b1932235fdfd874c4c91d1bb0 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sat, 11 Sep 2021 17:50:09 +0200
-Subject: net: dsa: qca8k: fix kernel panic with legacy mdio mapping
-
-When the mdio legacy mapping is used the mii_bus priv registered by DSA
-refer to the dsa switch struct instead of the qca8k_priv struct and
-causes a kernel panic. Create dedicated function when the internal
-dedicated mdio driver is used to properly handle the 2 different
-implementation.
-
-Fixes: 759bafb8a322 ("net: dsa: qca8k: add support for internal phy and internal mdio")
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 30 ++++++++++++++++++++++--------
- 1 file changed, 22 insertions(+), 8 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -643,10 +643,8 @@ qca8k_mdio_busy_wait(struct mii_bus *bus
- }
- 
- static int
--qca8k_mdio_write(struct mii_bus *salve_bus, int phy, int regnum, u16 data)
-+qca8k_mdio_write(struct mii_bus *bus, int phy, int regnum, u16 data)
- {
--	struct qca8k_priv *priv = salve_bus->priv;
--	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 	u32 val;
- 	int ret;
-@@ -682,10 +680,8 @@ exit:
- }
- 
- static int
--qca8k_mdio_read(struct mii_bus *salve_bus, int phy, int regnum)
-+qca8k_mdio_read(struct mii_bus *bus, int phy, int regnum)
- {
--	struct qca8k_priv *priv = salve_bus->priv;
--	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 	u32 val;
- 	int ret;
-@@ -727,6 +723,24 @@ exit:
- }
- 
- static int
-+qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data)
-+{
-+	struct qca8k_priv *priv = slave_bus->priv;
-+	struct mii_bus *bus = priv->bus;
-+
-+	return qca8k_mdio_write(bus, phy, regnum, data);
-+}
-+
-+static int
-+qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum)
-+{
-+	struct qca8k_priv *priv = slave_bus->priv;
-+	struct mii_bus *bus = priv->bus;
-+
-+	return qca8k_mdio_read(bus, phy, regnum);
-+}
-+
-+static int
- qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
- {
- 	struct qca8k_priv *priv = ds->priv;
-@@ -775,8 +789,8 @@ qca8k_mdio_register(struct qca8k_priv *p
- 
- 	bus->priv = (void *)priv;
- 	bus->name = "qca8k slave mii";
--	bus->read = qca8k_mdio_read;
--	bus->write = qca8k_mdio_write;
-+	bus->read = qca8k_internal_mdio_read;
-+	bus->write = qca8k_internal_mdio_write;
- 	snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d",
- 		 ds->index);
- 
diff --git a/target/linux/generic/backport-5.10/740-v5.13-0001-net-dsa-b53-Add-debug-prints-in-b53_vlan_enable.patch b/target/linux/generic/backport-5.10/740-v5.13-0001-net-dsa-b53-Add-debug-prints-in-b53_vlan_enable.patch
deleted file mode 100644
index 91cf55b18a3a..000000000000
--- a/target/linux/generic/backport-5.10/740-v5.13-0001-net-dsa-b53-Add-debug-prints-in-b53_vlan_enable.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From ee47ed08d75e8f16b3cf882061ee19c2ea19dd6c Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Wed, 10 Mar 2021 10:52:26 -0800
-Subject: [PATCH] net: dsa: b53: Add debug prints in b53_vlan_enable()
-
-Having dynamic debug prints in b53_vlan_enable() has been helpful to
-uncover a recent but update the function to indicate the port being
-configured (or -1 for initial setup) and include the global VLAN enabled
-and VLAN filtering enable status.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_common.c | 11 +++++++----
- 1 file changed, 7 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -349,7 +349,7 @@ static void b53_set_forwarding(struct b5
- 	b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
- }
- 
--static void b53_enable_vlan(struct b53_device *dev, bool enable,
-+static void b53_enable_vlan(struct b53_device *dev, int port, bool enable,
- 			    bool enable_filtering)
- {
- 	u8 mgmt, vc0, vc1, vc4 = 0, vc5;
-@@ -431,6 +431,9 @@ static void b53_enable_vlan(struct b53_d
- 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
- 
- 	dev->vlan_enabled = enable;
-+
-+	dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n",
-+		port, enable, enable_filtering);
- }
- 
- static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
-@@ -708,7 +711,7 @@ int b53_configure_vlan(struct dsa_switch
- 		b53_do_vlan_op(dev, VTA_CMD_CLEAR);
- 	}
- 
--	b53_enable_vlan(dev, dev->vlan_enabled, ds->vlan_filtering);
-+	b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering);
- 
- 	b53_for_each_port(dev, i)
- 		b53_write16(dev, B53_VLAN_PAGE,
-@@ -1390,7 +1393,7 @@ int b53_vlan_filtering(struct dsa_switch
- 	if (switchdev_trans_ph_prepare(trans))
- 		return 0;
- 
--	b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering);
-+	b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering);
- 
- 	return 0;
- }
-@@ -1415,7 +1418,7 @@ int b53_vlan_prepare(struct dsa_switch *
- 	if (vlan->vid_end >= dev->num_vlans)
- 		return -ERANGE;
- 
--	b53_enable_vlan(dev, true, ds->vlan_filtering);
-+	b53_enable_vlan(dev, port, true, ds->vlan_filtering);
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-5.10/740-v5.13-0002-net-dsa-b53-spi-allow-device-tree-probing.patch b/target/linux/generic/backport-5.10/740-v5.13-0002-net-dsa-b53-spi-allow-device-tree-probing.patch
deleted file mode 100644
index 56579b2d3604..000000000000
--- a/target/linux/generic/backport-5.10/740-v5.13-0002-net-dsa-b53-spi-allow-device-tree-probing.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 6d16eadab6db0c1d61e59fee7ed1ecc2d10269be Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Mon, 15 Mar 2021 15:14:23 +0100
-Subject: [PATCH] net: dsa: b53: spi: allow device tree probing
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add missing of_match_table to allow device tree probing.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_spi.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/net/dsa/b53/b53_spi.c
-+++ b/drivers/net/dsa/b53/b53_spi.c
-@@ -324,9 +324,22 @@ static int b53_spi_remove(struct spi_dev
- 	return 0;
- }
- 
-+static const struct of_device_id b53_spi_of_match[] = {
-+	{ .compatible = "brcm,bcm5325" },
-+	{ .compatible = "brcm,bcm5365" },
-+	{ .compatible = "brcm,bcm5395" },
-+	{ .compatible = "brcm,bcm5397" },
-+	{ .compatible = "brcm,bcm5398" },
-+	{ .compatible = "brcm,bcm53115" },
-+	{ .compatible = "brcm,bcm53125" },
-+	{ .compatible = "brcm,bcm53128" },
-+	{ /* sentinel */ }
-+};
-+
- static struct spi_driver b53_spi_driver = {
- 	.driver = {
- 		.name	= "b53-switch",
-+		.of_match_table = b53_spi_of_match,
- 	},
- 	.probe	= b53_spi_probe,
- 	.remove	= b53_spi_remove,
diff --git a/target/linux/generic/backport-5.10/740-v5.13-0003-net-dsa-b53-relax-is63xx-condition.patch b/target/linux/generic/backport-5.10/740-v5.13-0003-net-dsa-b53-relax-is63xx-condition.patch
deleted file mode 100644
index 99eced1b6a08..000000000000
--- a/target/linux/generic/backport-5.10/740-v5.13-0003-net-dsa-b53-relax-is63xx-condition.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From ad426d7d966b525b73ed5a1842dd830312bbba71 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Wed, 17 Mar 2021 09:42:01 +0100
-Subject: [PATCH] net: dsa: b53: relax is63xx() condition
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM63xx switches are present on bcm63xx and bmips devices.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_priv.h | 4 ----
- 1 file changed, 4 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_priv.h
-+++ b/drivers/net/dsa/b53/b53_priv.h
-@@ -186,11 +186,7 @@ static inline int is531x5(struct b53_dev
- 
- static inline int is63xx(struct b53_device *dev)
- {
--#ifdef CONFIG_BCM63XX
- 	return dev->chip_id == BCM63XX_DEVICE_ID;
--#else
--	return 0;
--#endif
- }
- 
- static inline int is5301x(struct b53_device *dev)
diff --git a/target/linux/generic/backport-5.10/740-v5.13-0004-net-dsa-tag_brcm-add-support-for-legacy-tags.patch b/target/linux/generic/backport-5.10/740-v5.13-0004-net-dsa-tag_brcm-add-support-for-legacy-tags.patch
deleted file mode 100644
index 3b7d8f37cdfa..000000000000
--- a/target/linux/generic/backport-5.10/740-v5.13-0004-net-dsa-tag_brcm-add-support-for-legacy-tags.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From 964dbf186eaa84d409c359ddf09c827a3fbe8228 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Wed, 17 Mar 2021 11:29:26 +0100
-Subject: [PATCH] net: dsa: tag_brcm: add support for legacy tags
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add support for legacy Broadcom tags, which are similar to DSA_TAG_PROTO_BRCM.
-These tags are used on BCM5325, BCM5365 and BCM63xx switches.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/net/dsa.h  |   2 +
- net/dsa/Kconfig    |   7 +++
- net/dsa/tag_brcm.c | 107 +++++++++++++++++++++++++++++++++++++++++++--
- 3 files changed, 113 insertions(+), 3 deletions(-)
-
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -45,10 +45,12 @@ struct phylink_link_state;
- #define DSA_TAG_PROTO_OCELOT_VALUE		15
- #define DSA_TAG_PROTO_AR9331_VALUE		16
- #define DSA_TAG_PROTO_RTL4_A_VALUE		17
-+#define DSA_TAG_PROTO_BRCM_LEGACY_VALUE		22
- 
- enum dsa_tag_protocol {
- 	DSA_TAG_PROTO_NONE		= DSA_TAG_PROTO_NONE_VALUE,
- 	DSA_TAG_PROTO_BRCM		= DSA_TAG_PROTO_BRCM_VALUE,
-+	DSA_TAG_PROTO_BRCM_LEGACY	= DSA_TAG_PROTO_BRCM_LEGACY_VALUE,
- 	DSA_TAG_PROTO_BRCM_PREPEND	= DSA_TAG_PROTO_BRCM_PREPEND_VALUE,
- 	DSA_TAG_PROTO_DSA		= DSA_TAG_PROTO_DSA_VALUE,
- 	DSA_TAG_PROTO_EDSA		= DSA_TAG_PROTO_EDSA_VALUE,
---- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -47,6 +47,13 @@ config NET_DSA_TAG_BRCM
- 	  Say Y if you want to enable support for tagging frames for the
- 	  Broadcom switches which place the tag after the MAC source address.
- 
-+config NET_DSA_TAG_BRCM_LEGACY
-+	tristate "Tag driver for Broadcom legacy switches using in-frame headers"
-+	select NET_DSA_TAG_BRCM_COMMON
-+	help
-+	  Say Y if you want to enable support for tagging frames for the
-+	  Broadcom legacy switches which place the tag after the MAC source
-+	  address.
- 
- config NET_DSA_TAG_BRCM_PREPEND
- 	tristate "Tag driver for Broadcom switches using prepended headers"
---- a/net/dsa/tag_brcm.c
-+++ b/net/dsa/tag_brcm.c
-@@ -11,9 +11,26 @@
- 
- #include "dsa_priv.h"
- 
--/* This tag length is 4 bytes, older ones were 6 bytes, we do not
-- * handle them
-- */
-+/* Legacy Broadcom tag (6 bytes) */
-+#define BRCM_LEG_TAG_LEN	6
-+
-+/* Type fields */
-+/* 1st byte in the tag */
-+#define BRCM_LEG_TYPE_HI	0x88
-+/* 2nd byte in the tag */
-+#define BRCM_LEG_TYPE_LO	0x74
-+
-+/* Tag fields */
-+/* 3rd byte in the tag */
-+#define BRCM_LEG_UNICAST	(0 << 5)
-+#define BRCM_LEG_MULTICAST	(1 << 5)
-+#define BRCM_LEG_EGRESS		(2 << 5)
-+#define BRCM_LEG_INGRESS	(3 << 5)
-+
-+/* 6th byte in the tag */
-+#define BRCM_LEG_PORT_ID	(0xf)
-+
-+/* Newer Broadcom tag (4 bytes) */
- #define BRCM_TAG_LEN	4
- 
- /* Tag is constructed and desconstructed using byte by byte access
-@@ -194,6 +211,87 @@ DSA_TAG_DRIVER(brcm_netdev_ops);
- MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM);
- #endif
- 
-+#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
-+static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb,
-+					 struct net_device *dev)
-+{
-+	struct dsa_port *dp = dsa_slave_to_port(dev);
-+	u8 *brcm_tag;
-+
-+	/* The Ethernet switch we are interfaced with needs packets to be at
-+	 * least 64 bytes (including FCS) otherwise they will be discarded when
-+	 * they enter the switch port logic. When Broadcom tags are enabled, we
-+	 * need to make sure that packets are at least 70 bytes
-+	 * (including FCS and tag) because the length verification is done after
-+	 * the Broadcom tag is stripped off the ingress packet.
-+	 *
-+	 * Let dsa_slave_xmit() free the SKB
-+	 */
-+	if (__skb_put_padto(skb, ETH_ZLEN + BRCM_LEG_TAG_LEN, false))
-+		return NULL;
-+
-+	skb_push(skb, BRCM_LEG_TAG_LEN);
-+
-+	memmove(skb->data, skb->data + BRCM_LEG_TAG_LEN, 2 * ETH_ALEN);
-+
-+	brcm_tag = skb->data + 2 * ETH_ALEN;
-+
-+	/* Broadcom tag type */
-+	brcm_tag[0] = BRCM_LEG_TYPE_HI;
-+	brcm_tag[1] = BRCM_LEG_TYPE_LO;
-+
-+	/* Broadcom tag value */
-+	brcm_tag[2] = BRCM_LEG_EGRESS;
-+	brcm_tag[3] = 0;
-+	brcm_tag[4] = 0;
-+	brcm_tag[5] = dp->index & BRCM_LEG_PORT_ID;
-+
-+	return skb;
-+}
-+
-+static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
-+					struct net_device *dev,
-+					struct packet_type *pt)
-+{
-+	int source_port;
-+	u8 *brcm_tag;
-+
-+	if (unlikely(!pskb_may_pull(skb, BRCM_LEG_PORT_ID)))
-+		return NULL;
-+
-+	brcm_tag = skb->data - 2;
-+
-+	source_port = brcm_tag[5] & BRCM_LEG_PORT_ID;
-+
-+	skb->dev = dsa_master_find_slave(dev, 0, source_port);
-+	if (!skb->dev)
-+		return NULL;
-+
-+	/* Remove Broadcom tag and update checksum */
-+	skb_pull_rcsum(skb, BRCM_LEG_TAG_LEN);
-+
-+	skb->offload_fwd_mark = 1;
-+
-+	/* Move the Ethernet DA and SA */
-+	memmove(skb->data - ETH_HLEN,
-+		skb->data - ETH_HLEN - BRCM_LEG_TAG_LEN,
-+		2 * ETH_ALEN);
-+
-+	return skb;
-+}
-+
-+static const struct dsa_device_ops brcm_legacy_netdev_ops = {
-+	.name = "brcm-legacy",
-+	.proto = DSA_TAG_PROTO_BRCM_LEGACY,
-+	.xmit = brcm_leg_tag_xmit,
-+	.rcv = brcm_leg_tag_rcv,
-+	.overhead = BRCM_LEG_TAG_LEN,
-+};
-+
-+DSA_TAG_DRIVER(brcm_legacy_netdev_ops);
-+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM_LEGACY);
-+#endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY */
-+
- #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND)
- static struct sk_buff *brcm_tag_xmit_prepend(struct sk_buff *skb,
- 					     struct net_device *dev)
-@@ -226,6 +324,9 @@ static struct dsa_tag_driver *dsa_tag_dr
- #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM)
- 	&DSA_TAG_DRIVER_NAME(brcm_netdev_ops),
- #endif
-+#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
-+	&DSA_TAG_DRIVER_NAME(brcm_legacy_netdev_ops),
-+#endif
- #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND)
- 	&DSA_TAG_DRIVER_NAME(brcm_prepend_netdev_ops),
- #endif
diff --git a/target/linux/generic/backport-5.10/740-v5.13-0005-net-dsa-b53-support-legacy-tags.patch b/target/linux/generic/backport-5.10/740-v5.13-0005-net-dsa-b53-support-legacy-tags.patch
deleted file mode 100644
index 838e78a0571f..000000000000
--- a/target/linux/generic/backport-5.10/740-v5.13-0005-net-dsa-b53-support-legacy-tags.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 46c5176c586c81306bf9e7024c13b95da775490f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Wed, 17 Mar 2021 11:29:27 +0100
-Subject: [PATCH] net: dsa: b53: support legacy tags
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-These tags are used on BCM5325, BCM5365 and BCM63xx switches.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/Kconfig      |  1 +
- drivers/net/dsa/b53/b53_common.c | 12 +++++++-----
- 2 files changed, 8 insertions(+), 5 deletions(-)
-
---- a/drivers/net/dsa/b53/Kconfig
-+++ b/drivers/net/dsa/b53/Kconfig
-@@ -3,6 +3,7 @@ menuconfig B53
- 	tristate "Broadcom BCM53xx managed switch support"
- 	depends on NET_DSA
- 	select NET_DSA_TAG_BRCM
-+	select NET_DSA_TAG_BRCM_LEGACY
- 	select NET_DSA_TAG_BRCM_PREPEND
- 	help
- 	  This driver adds support for Broadcom managed switch chips. It supports
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -2024,15 +2024,17 @@ enum dsa_tag_protocol b53_get_tag_protoc
- {
- 	struct b53_device *dev = ds->priv;
- 
--	/* Older models (5325, 5365) support a different tag format that we do
--	 * not support in net/dsa/tag_brcm.c yet.
--	 */
--	if (is5325(dev) || is5365(dev) ||
--	    !b53_can_enable_brcm_tags(ds, port, mprot)) {
-+	if (!b53_can_enable_brcm_tags(ds, port, mprot)) {
- 		dev->tag_protocol = DSA_TAG_PROTO_NONE;
- 		goto out;
- 	}
- 
-+	/* Older models require a different 6 byte tag */
-+	if (is5325(dev) || is5365(dev) || is63xx(dev)) {
-+		dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
-+		goto out;
-+	}
-+
- 	/* Broadcom BCM58xx chips have a flow accelerator on Port 8
- 	 * which requires us to use the prepended Broadcom tag type
- 	 */
diff --git a/target/linux/generic/backport-5.10/740-v5.13-0006-net-dsa-b53-mmap-Add-device-tree-support.patch b/target/linux/generic/backport-5.10/740-v5.13-0006-net-dsa-b53-mmap-Add-device-tree-support.patch
deleted file mode 100644
index 48494d13e47f..000000000000
--- a/target/linux/generic/backport-5.10/740-v5.13-0006-net-dsa-b53-mmap-Add-device-tree-support.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From a5538a777b73b35750ed1ffff8c1ef539e861624 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Wed, 17 Mar 2021 10:23:17 +0100
-Subject: [PATCH] net: dsa: b53: mmap: Add device tree support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add device tree support to b53_mmap.c while keeping platform devices support.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_mmap.c | 55 ++++++++++++++++++++++++++++++++++
- 1 file changed, 55 insertions(+)
-
---- a/drivers/net/dsa/b53/b53_mmap.c
-+++ b/drivers/net/dsa/b53/b53_mmap.c
-@@ -16,6 +16,7 @@
-  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-  */
- 
-+#include <linux/bits.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/io.h>
-@@ -242,11 +243,65 @@ static const struct b53_io_ops b53_mmap_
- 	.phy_write16 = b53_mmap_phy_write16,
- };
- 
-+static int b53_mmap_probe_of(struct platform_device *pdev,
-+			     struct b53_platform_data **ppdata)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct device_node *of_ports, *of_port;
-+	struct device *dev = &pdev->dev;
-+	struct b53_platform_data *pdata;
-+	void __iomem *mem;
-+
-+	mem = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(mem))
-+		return PTR_ERR(mem);
-+
-+	pdata = devm_kzalloc(dev, sizeof(struct b53_platform_data),
-+			     GFP_KERNEL);
-+	if (!pdata)
-+		return -ENOMEM;
-+
-+	pdata->regs = mem;
-+	pdata->chip_id = BCM63XX_DEVICE_ID;
-+	pdata->big_endian = of_property_read_bool(np, "big-endian");
-+
-+	of_ports = of_get_child_by_name(np, "ports");
-+	if (!of_ports) {
-+		dev_err(dev, "no ports child node found\n");
-+		return -EINVAL;
-+	}
-+
-+	for_each_available_child_of_node(of_ports, of_port) {
-+		u32 reg;
-+
-+		if (of_property_read_u32(of_port, "reg", &reg))
-+			continue;
-+
-+		if (reg < B53_CPU_PORT)
-+			pdata->enabled_ports |= BIT(reg);
-+	}
-+
-+	of_node_put(of_ports);
-+	*ppdata = pdata;
-+
-+	return 0;
-+}
-+
- static int b53_mmap_probe(struct platform_device *pdev)
- {
-+	struct device_node *np = pdev->dev.of_node;
- 	struct b53_platform_data *pdata = pdev->dev.platform_data;
- 	struct b53_mmap_priv *priv;
- 	struct b53_device *dev;
-+	int ret;
-+
-+	if (!pdata && np) {
-+		ret = b53_mmap_probe_of(pdev, &pdata);
-+		if (ret) {
-+			dev_err(&pdev->dev, "OF probe error\n");
-+			return ret;
-+		}
-+	}
- 
- 	if (!pdata)
- 		return -EINVAL;
diff --git a/target/linux/generic/backport-5.10/740-v5.13-0007-net-dsa-b53-spi-add-missing-MODULE_DEVICE_TABLE.patch b/target/linux/generic/backport-5.10/740-v5.13-0007-net-dsa-b53-spi-add-missing-MODULE_DEVICE_TABLE.patch
deleted file mode 100644
index ea3675573201..000000000000
--- a/target/linux/generic/backport-5.10/740-v5.13-0007-net-dsa-b53-spi-add-missing-MODULE_DEVICE_TABLE.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 866f1577ba69bde2b9f36c300f603596c7d84a62 Mon Sep 17 00:00:00 2001
-From: Qinglang Miao <miaoqinglang@huawei.com>
-Date: Thu, 25 Mar 2021 17:19:54 +0800
-Subject: [PATCH] net: dsa: b53: spi: add missing MODULE_DEVICE_TABLE
-
-This patch adds missing MODULE_DEVICE_TABLE definition which generates
-correct modalias for automatic loading of this driver when it is built
-as an external module.
-
-Reported-by: Hulk Robot <hulkci@huawei.com>
-Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_spi.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/dsa/b53/b53_spi.c
-+++ b/drivers/net/dsa/b53/b53_spi.c
-@@ -335,6 +335,7 @@ static const struct of_device_id b53_spi
- 	{ .compatible = "brcm,bcm53128" },
- 	{ /* sentinel */ }
- };
-+MODULE_DEVICE_TABLE(of, b53_spi_of_match);
- 
- static struct spi_driver b53_spi_driver = {
- 	.driver = {
diff --git a/target/linux/generic/backport-5.10/741-v5.14-0001-net-dsa-b53-Do-not-force-CPU-to-be-always-tagged.patch b/target/linux/generic/backport-5.10/741-v5.14-0001-net-dsa-b53-Do-not-force-CPU-to-be-always-tagged.patch
deleted file mode 100644
index 2a8def39b8cc..000000000000
--- a/target/linux/generic/backport-5.10/741-v5.14-0001-net-dsa-b53-Do-not-force-CPU-to-be-always-tagged.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 2c32a3d3c233b855943677609fe388f82b1f0975 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Tue, 8 Jun 2021 14:22:04 -0700
-Subject: [PATCH] net: dsa: b53: Do not force CPU to be always tagged
-
-Commit ca8931948344 ("net: dsa: b53: Keep CPU port as tagged in all
-VLANs") forced the CPU port to be always tagged in any VLAN membership.
-This was necessary back then because we did not support Broadcom tags
-for all configurations so the only way to differentiate tagged and
-untagged traffic while DSA_TAG_PROTO_NONE was used was to force the CPU
-port into being always tagged.
-
-With most configurations enabling Broadcom tags, especially after
-8fab459e69ab ("net: dsa: b53: Enable Broadcom tags for 531x5/539x
-families") we do not need to apply this unconditional force tagging of
-the CPU port in all VLANs.
-
-A helper function is introduced to faciliate the encapsulation of the
-specific condition requiring the CPU port to be tagged in all VLANs and
-the dsa_switch_ops::untag_bridge_pvid boolean is moved to when
-dsa_switch_ops::setup is called when we have already determined the
-tagging protocol we will be using.
-
-Reported-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Tested-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_common.c | 17 ++++++++++++++---
- 1 file changed, 14 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -1049,6 +1049,11 @@ static int b53_setup(struct dsa_switch *
- 	unsigned int port;
- 	int ret;
- 
-+	/* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set
-+	 * which forces the CPU port to be tagged in all VLANs.
-+	 */
-+	ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE;
-+
- 	ret = b53_reset_switch(dev);
- 	if (ret) {
- 		dev_err(ds->dev, "failed to reset switch\n");
-@@ -1423,6 +1428,13 @@ int b53_vlan_prepare(struct dsa_switch *
- 	return 0;
- }
- EXPORT_SYMBOL(b53_vlan_prepare);
-+ 
-+static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
-+{
-+	struct b53_device *dev = ds->priv;
-+
-+	return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
-+}
- 
- void b53_vlan_add(struct dsa_switch *ds, int port,
- 		  const struct switchdev_obj_port_vlan *vlan)
-@@ -1442,7 +1454,7 @@ void b53_vlan_add(struct dsa_switch *ds,
- 			untagged = true;
- 
- 		vl->members |= BIT(port);
--		if (untagged && !dsa_is_cpu_port(ds, port))
-+		if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
- 			vl->untag |= BIT(port);
- 		else
- 			vl->untag &= ~BIT(port);
-@@ -1480,7 +1492,7 @@ int b53_vlan_del(struct dsa_switch *ds,
- 		if (pvid == vid)
- 			pvid = b53_default_pvid(dev);
- 
--		if (untagged && !dsa_is_cpu_port(ds, port))
-+		if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
- 			vl->untag &= ~(BIT(port));
- 
- 		b53_set_vlan_entry(dev, vid, vl);
-@@ -2644,7 +2656,6 @@ struct b53_device *b53_switch_alloc(stru
- 	dev->ops = ops;
- 	ds->ops = &b53_switch_ops;
- 	ds->configure_vlan_while_not_filtering = true;
--	ds->untag_bridge_pvid = true;
- 	dev->vlan_enabled = ds->configure_vlan_while_not_filtering;
- 	/* Let DSA handle the case were multiple bridges span the same switch
- 	 * device and different VLAN awareness settings are requested, which
diff --git a/target/linux/generic/backport-5.10/741-v5.14-0002-net-dsa-b53-remove-redundant-null-check-on-dev.patch b/target/linux/generic/backport-5.10/741-v5.14-0002-net-dsa-b53-remove-redundant-null-check-on-dev.patch
deleted file mode 100644
index ee3a71ffa5a4..000000000000
--- a/target/linux/generic/backport-5.10/741-v5.14-0002-net-dsa-b53-remove-redundant-null-check-on-dev.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 11b57faf951cd3a570e3d9e463fc7c41023bc8c6 Mon Sep 17 00:00:00 2001
-From: Colin Ian King <colin.king@canonical.com>
-Date: Tue, 15 Jun 2021 10:05:16 +0100
-Subject: [PATCH] net: dsa: b53: remove redundant null check on dev
-
-The pointer dev can never be null, the null check is redundant
-and can be removed. Cleans up a static analysis warning that
-pointer priv is dereferencing dev before dev is being null
-checked.
-
-Addresses-Coverity: ("Dereference before null check")
-Signed-off-by: Colin Ian King <colin.king@canonical.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_srab.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_srab.c
-+++ b/drivers/net/dsa/b53/b53_srab.c
-@@ -632,8 +632,7 @@ static int b53_srab_remove(struct platfo
- 	struct b53_srab_priv *priv = dev->priv;
- 
- 	b53_srab_intr_set(priv, false);
--	if (dev)
--		b53_switch_remove(dev);
-+	b53_switch_remove(dev);
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-5.10/741-v5.14-0003-net-dsa-b53-Create-default-VLAN-entry-explicitly.patch b/target/linux/generic/backport-5.10/741-v5.14-0003-net-dsa-b53-Create-default-VLAN-entry-explicitly.patch
deleted file mode 100644
index df891d68ab4f..000000000000
--- a/target/linux/generic/backport-5.10/741-v5.14-0003-net-dsa-b53-Create-default-VLAN-entry-explicitly.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 64a81b24487f0d2fba0f033029eec2abc7d82cee Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 21 Jun 2021 15:10:55 -0700
-Subject: [PATCH] net: dsa: b53: Create default VLAN entry explicitly
-
-In case CONFIG_VLAN_8021Q is not set, there will be no call down to the
-b53 driver to ensure that the default PVID VLAN entry will be configured
-with the appropriate untagged attribute towards the CPU port. We were
-implicitly relying on dsa_slave_vlan_rx_add_vid() to do that for us,
-instead make it explicit.
-
-Reported-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_common.c | 27 +++++++++++++++++++--------
- 1 file changed, 19 insertions(+), 8 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -693,6 +693,13 @@ static u16 b53_default_pvid(struct b53_d
- 		return 0;
- }
- 
-+static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
-+{
-+	struct b53_device *dev = ds->priv;
-+
-+	return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
-+}
-+
- int b53_configure_vlan(struct dsa_switch *ds)
- {
- 	struct b53_device *dev = ds->priv;
-@@ -713,9 +720,20 @@ int b53_configure_vlan(struct dsa_switch
- 
- 	b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering);
- 
--	b53_for_each_port(dev, i)
-+	/* Create an untagged VLAN entry for the default PVID in case
-+	 * CONFIG_VLAN_8021Q is disabled and there are no calls to
-+	 * dsa_slave_vlan_rx_add_vid() to create the default VLAN
-+	 * entry. Do this only when the tagging protocol is not
-+	 * DSA_TAG_PROTO_NONE
-+	 */
-+	b53_for_each_port(dev, i) {
-+		v = &dev->vlans[def_vid];
-+		v->members |= BIT(i);
-+		if (!b53_vlan_port_needs_forced_tagged(ds, i))
-+			v->untag = v->members;
- 		b53_write16(dev, B53_VLAN_PAGE,
- 			    B53_VLAN_PORT_DEF_TAG(i), def_vid);
-+	}
- 
- 	/* Upon initial call we have not set-up any VLANs, but upon
- 	 * system resume, we need to restore all VLAN entries.
-@@ -1429,13 +1447,6 @@ int b53_vlan_prepare(struct dsa_switch *
- }
- EXPORT_SYMBOL(b53_vlan_prepare);
-  
--static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
--{
--	struct b53_device *dev = ds->priv;
--
--	return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
--}
--
- void b53_vlan_add(struct dsa_switch *ds, int port,
- 		  const struct switchdev_obj_port_vlan *vlan)
- {
diff --git a/target/linux/generic/backport-5.10/742-v5.16-net-phy-at803x-add-support-for-qca-8327-internal-phy.patch b/target/linux/generic/backport-5.10/742-v5.16-net-phy-at803x-add-support-for-qca-8327-internal-phy.patch
deleted file mode 100644
index e356d549bbb0..000000000000
--- a/target/linux/generic/backport-5.10/742-v5.16-net-phy-at803x-add-support-for-qca-8327-internal-phy.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 0ccf8511182436183c031e8a2f740ae91a02c625 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Tue, 14 Sep 2021 14:33:45 +0200
-Subject: net: phy: at803x: add support for qca 8327 internal phy
-
-Add support for qca8327 internal phy needed for correct init of the
-switch port. It does use the same qca8337 function and reg just with a
-different id.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Tested-by: Rosen Penev <rosenp@gmail.com>
-Tested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1356,6 +1356,19 @@ static struct phy_driver at803x_driver[]
- 	.get_sset_count = at803x_get_sset_count,
- 	.get_strings = at803x_get_strings,
- 	.get_stats = at803x_get_stats,
-+}, {
-+	/* QCA8327 */
-+	.phy_id = QCA8327_PHY_ID,
-+	.phy_id_mask = QCA8K_PHY_ID_MASK,
-+	.name = "QCA PHY 8327",
-+	/* PHY_GBIT_FEATURES */
-+	.probe = at803x_probe,
-+	.flags = PHY_IS_INTERNAL,
-+	.config_init = qca83xx_config_init,
-+	.soft_reset = genphy_soft_reset,
-+	.get_sset_count = at803x_get_sset_count,
-+	.get_strings = at803x_get_strings,
-+	.get_stats = at803x_get_stats,
- }, };
- 
- module_phy_driver(at803x_driver);
-@@ -1366,6 +1379,8 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) },
- 	{ PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) },
- 	{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(QCA8327_PHY_ID) },
- 	{ }
- };
- 
diff --git a/target/linux/generic/backport-5.10/743-v5.16-0001-net-dsa-b53-Include-all-ports-in-enabled_ports.patch b/target/linux/generic/backport-5.10/743-v5.16-0001-net-dsa-b53-Include-all-ports-in-enabled_ports.patch
deleted file mode 100644
index d80b5db714bc..000000000000
--- a/target/linux/generic/backport-5.10/743-v5.16-0001-net-dsa-b53-Include-all-ports-in-enabled_ports.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From 983d96a9116a328668601555d96736261d33170c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 16 Sep 2021 14:03:51 +0200
-Subject: [PATCH] net: dsa: b53: Include all ports in "enabled_ports"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Make "enabled_ports" bitfield contain all available switch ports
-including a CPU port. This way there is no need for fixup during
-initialization.
-
-For BCM53010, BCM53018 and BCM53019 include also other available ports.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/b53/b53_common.c | 23 +++++++++++------------
- 1 file changed, 11 insertions(+), 12 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -2288,7 +2288,7 @@ static const struct b53_chip_data b53_sw
- 		.chip_id = BCM5325_DEVICE_ID,
- 		.dev_name = "BCM5325",
- 		.vlans = 16,
--		.enabled_ports = 0x1f,
-+		.enabled_ports = 0x3f,
- 		.arl_bins = 2,
- 		.arl_buckets = 1024,
- 		.imp_port = 5,
-@@ -2299,7 +2299,7 @@ static const struct b53_chip_data b53_sw
- 		.chip_id = BCM5365_DEVICE_ID,
- 		.dev_name = "BCM5365",
- 		.vlans = 256,
--		.enabled_ports = 0x1f,
-+		.enabled_ports = 0x3f,
- 		.arl_bins = 2,
- 		.arl_buckets = 1024,
- 		.imp_port = 5,
-@@ -2310,7 +2310,7 @@ static const struct b53_chip_data b53_sw
- 		.chip_id = BCM5389_DEVICE_ID,
- 		.dev_name = "BCM5389",
- 		.vlans = 4096,
--		.enabled_ports = 0x1f,
-+		.enabled_ports = 0x11f,
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
-@@ -2324,7 +2324,7 @@ static const struct b53_chip_data b53_sw
- 		.chip_id = BCM5395_DEVICE_ID,
- 		.dev_name = "BCM5395",
- 		.vlans = 4096,
--		.enabled_ports = 0x1f,
-+		.enabled_ports = 0x11f,
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
-@@ -2338,7 +2338,7 @@ static const struct b53_chip_data b53_sw
- 		.chip_id = BCM5397_DEVICE_ID,
- 		.dev_name = "BCM5397",
- 		.vlans = 4096,
--		.enabled_ports = 0x1f,
-+		.enabled_ports = 0x11f,
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
-@@ -2352,7 +2352,7 @@ static const struct b53_chip_data b53_sw
- 		.chip_id = BCM5398_DEVICE_ID,
- 		.dev_name = "BCM5398",
- 		.vlans = 4096,
--		.enabled_ports = 0x7f,
-+		.enabled_ports = 0x17f,
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
-@@ -2366,7 +2366,7 @@ static const struct b53_chip_data b53_sw
- 		.chip_id = BCM53115_DEVICE_ID,
- 		.dev_name = "BCM53115",
- 		.vlans = 4096,
--		.enabled_ports = 0x1f,
-+		.enabled_ports = 0x11f,
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.vta_regs = B53_VTA_REGS,
-@@ -2380,7 +2380,7 @@ static const struct b53_chip_data b53_sw
- 		.chip_id = BCM53125_DEVICE_ID,
- 		.dev_name = "BCM53125",
- 		.vlans = 4096,
--		.enabled_ports = 0xff,
-+		.enabled_ports = 0x1ff,
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
-@@ -2422,7 +2422,7 @@ static const struct b53_chip_data b53_sw
- 		.chip_id = BCM53010_DEVICE_ID,
- 		.dev_name = "BCM53010",
- 		.vlans = 4096,
--		.enabled_ports = 0x1f,
-+		.enabled_ports = 0x1bf,
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
-@@ -2464,7 +2464,7 @@ static const struct b53_chip_data b53_sw
- 		.chip_id = BCM53018_DEVICE_ID,
- 		.dev_name = "BCM53018",
- 		.vlans = 4096,
--		.enabled_ports = 0x1f,
-+		.enabled_ports = 0x1bf,
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
-@@ -2478,7 +2478,7 @@ static const struct b53_chip_data b53_sw
- 		.chip_id = BCM53019_DEVICE_ID,
- 		.dev_name = "BCM53019",
- 		.vlans = 4096,
--		.enabled_ports = 0x1f,
-+		.enabled_ports = 0x1bf,
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
-@@ -2605,7 +2605,6 @@ static int b53_switch_init(struct b53_de
- 			dev->cpu_port = 5;
- 	}
- 
--	dev->enabled_ports |= BIT(dev->cpu_port);
- 	dev->num_ports = fls(dev->enabled_ports);
- 
- 	dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
diff --git a/target/linux/generic/backport-5.10/743-v5.16-0002-net-dsa-b53-Drop-BCM5301x-workaround-for-a-wrong-CPU.patch b/target/linux/generic/backport-5.10/743-v5.16-0002-net-dsa-b53-Drop-BCM5301x-workaround-for-a-wrong-CPU.patch
deleted file mode 100644
index 4a4f8e940d22..000000000000
--- a/target/linux/generic/backport-5.10/743-v5.16-0002-net-dsa-b53-Drop-BCM5301x-workaround-for-a-wrong-CPU.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From b290c6384afabbca5ae6e2af72fb1b2bc37922be Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 16 Sep 2021 14:03:52 +0200
-Subject: [PATCH] net: dsa: b53: Drop BCM5301x workaround for a wrong CPU/IMP
- port
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On BCM5301x port 8 requires a fixed link when used.
-
-Years ago when b53 was an OpenWrt downstream driver (with configuration
-based on sometimes bugged NVRAM) there was a need for a fixup. In case
-of forcing fixed link for (incorrectly specified) port 5 the code had to
-actually setup port 8 link.
-
-For upstream b53 driver with setup based on DT there is no need for that
-workaround. In DT we have and require correct ports setup.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/b53/b53_common.c | 6 ------
- 1 file changed, 6 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -1256,12 +1256,6 @@ static void b53_adjust_link(struct dsa_s
- 				return;
- 			}
- 		}
--	} else if (is5301x(dev)) {
--		if (port != dev->cpu_port) {
--			b53_force_port_config(dev, dev->cpu_port, 2000,
--					      DUPLEX_FULL, true, true);
--			b53_force_link(dev, dev->cpu_port, 1);
--		}
- 	}
- 
- 	/* Re-negotiate EEE if it was enabled already */
diff --git a/target/linux/generic/backport-5.10/743-v5.16-0003-net-dsa-b53-Improve-flow-control-setup-on-BCM5301x.patch b/target/linux/generic/backport-5.10/743-v5.16-0003-net-dsa-b53-Improve-flow-control-setup-on-BCM5301x.patch
deleted file mode 100644
index 3954ee4aac63..000000000000
--- a/target/linux/generic/backport-5.10/743-v5.16-0003-net-dsa-b53-Improve-flow-control-setup-on-BCM5301x.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 3ff26b29230c54fea2353b63124c589b61953e14 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 16 Sep 2021 14:03:53 +0200
-Subject: [PATCH] net: dsa: b53: Improve flow control setup on BCM5301x
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-According to the Broadcom's reference driver flow control needs to be
-enabled for any CPU switch port (5, 7 or 8 - depending on which one is
-used). Current code makes it work only for the port 5. Use
-dsa_is_cpu_port() which solved that problem.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/b53/b53_common.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -1187,7 +1187,7 @@ static void b53_adjust_link(struct dsa_s
- 		return;
- 
- 	/* Enable flow control on BCM5301x's CPU port */
--	if (is5301x(dev) && port == dev->cpu_port)
-+	if (is5301x(dev) && dsa_is_cpu_port(ds, port))
- 		tx_pause = rx_pause = true;
- 
- 	if (phydev->pause) {
diff --git a/target/linux/generic/backport-5.10/743-v5.16-0004-net-dsa-b53-Drop-unused-cpu_port-field.patch b/target/linux/generic/backport-5.10/743-v5.16-0004-net-dsa-b53-Drop-unused-cpu_port-field.patch
deleted file mode 100644
index 9e687b14880b..000000000000
--- a/target/linux/generic/backport-5.10/743-v5.16-0004-net-dsa-b53-Drop-unused-cpu_port-field.patch
+++ /dev/null
@@ -1,205 +0,0 @@
-From 7d5af56418d7d01e43247a33b6fe6492ea871923 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 16 Sep 2021 14:03:54 +0200
-Subject: [PATCH] net: dsa: b53: Drop unused "cpu_port" field
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's set but never used anymore.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/b53/b53_common.c | 28 ----------------------------
- drivers/net/dsa/b53/b53_priv.h   |  1 -
- 2 files changed, 29 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -2286,7 +2286,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 2,
- 		.arl_buckets = 1024,
- 		.imp_port = 5,
--		.cpu_port = B53_CPU_PORT_25,
- 		.duplex_reg = B53_DUPLEX_STAT_FE,
- 	},
- 	{
-@@ -2297,7 +2296,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 2,
- 		.arl_buckets = 1024,
- 		.imp_port = 5,
--		.cpu_port = B53_CPU_PORT_25,
- 		.duplex_reg = B53_DUPLEX_STAT_FE,
- 	},
- 	{
-@@ -2308,7 +2306,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT,
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2322,7 +2319,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT,
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2336,7 +2332,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT,
- 		.vta_regs = B53_VTA_REGS_9798,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2350,7 +2345,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT,
- 		.vta_regs = B53_VTA_REGS_9798,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2365,7 +2359,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_buckets = 1024,
- 		.vta_regs = B53_VTA_REGS,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
- 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
-@@ -2378,7 +2371,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT,
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2392,7 +2384,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT,
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2406,7 +2397,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT,
- 		.vta_regs = B53_VTA_REGS_63XX,
- 		.duplex_reg = B53_DUPLEX_STAT_63XX,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
-@@ -2420,7 +2410,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2434,7 +2423,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2448,7 +2436,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2462,7 +2449,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2476,7 +2462,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2490,7 +2475,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT,
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2504,7 +2488,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT,
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2518,7 +2501,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 1024,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT,
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2532,7 +2514,6 @@ static const struct b53_chip_data b53_sw
- 		.arl_bins = 4,
- 		.arl_buckets = 256,
- 		.imp_port = 8,
--		.cpu_port = B53_CPU_PORT,
- 		.vta_regs = B53_VTA_REGS,
- 		.duplex_reg = B53_DUPLEX_STAT_GE,
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-@@ -2558,7 +2539,6 @@ static int b53_switch_init(struct b53_de
- 			dev->vta_regs[2] = chip->vta_regs[2];
- 			dev->jumbo_pm_reg = chip->jumbo_pm_reg;
- 			dev->imp_port = chip->imp_port;
--			dev->cpu_port = chip->cpu_port;
- 			dev->num_vlans = chip->vlans;
- 			dev->num_arl_bins = chip->arl_bins;
- 			dev->num_arl_buckets = chip->arl_buckets;
-@@ -2590,13 +2570,6 @@ static int b53_switch_init(struct b53_de
- 			break;
- #endif
- 		}
--	} else if (dev->chip_id == BCM53115_DEVICE_ID) {
--		u64 strap_value;
--
--		b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value);
--		/* use second IMP port if GMII is enabled */
--		if (strap_value & SV_GMII_CTRL_115)
--			dev->cpu_port = 5;
- 	}
- 
- 	dev->num_ports = fls(dev->enabled_ports);
---- a/drivers/net/dsa/b53/b53_priv.h
-+++ b/drivers/net/dsa/b53/b53_priv.h
-@@ -123,7 +123,6 @@ struct b53_device {
- 	/* used ports mask */
- 	u16 enabled_ports;
- 	unsigned int imp_port;
--	unsigned int cpu_port;
- 
- 	/* connect specific data */
- 	u8 current_page;
diff --git a/target/linux/generic/backport-5.10/744-v5.15-net-dsa-don-t-set-skb-offload_fwd_mark-when-not-offl.patch b/target/linux/generic/backport-5.10/744-v5.15-net-dsa-don-t-set-skb-offload_fwd_mark-when-not-offl.patch
deleted file mode 100644
index 51f87904ef18..000000000000
--- a/target/linux/generic/backport-5.10/744-v5.15-net-dsa-don-t-set-skb-offload_fwd_mark-when-not-offl.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From bea7907837c57a0aaac009931eb14efb056dafab Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 29 Jul 2021 17:56:00 +0300
-Subject: [PATCH] net: dsa: don't set skb->offload_fwd_mark when not offloading
- the bridge
-
-DSA has gained the recent ability to deal gracefully with upper
-interfaces it cannot offload, such as the bridge, bonding or team
-drivers. When such uppers exist, the ports are still in standalone mode
-as far as the hardware is concerned.
-
-But when we deliver packets to the software bridge in order for that to
-do the forwarding, there is an unpleasant surprise in that the bridge
-will refuse to forward them. This is because we unconditionally set
-skb->offload_fwd_mark = true, meaning that the bridge thinks the frames
-were already forwarded in hardware by us.
-
-Since dp->bridge_dev is populated only when there is hardware offload
-for it, but not in the software fallback case, let's introduce a new
-helper that can be called from the tagger data path which sets the
-skb->offload_fwd_mark accordingly to zero when there is no hardware
-offload for bridging. This lets the bridge forward packets back to other
-interfaces of our switch, if needed.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/dsa/dsa_priv.h         | 14 ++++++++++++++
- net/dsa/tag_brcm.c         |  4 ++--
- net/dsa/tag_dsa.c          | 15 +++++++++++----
- net/dsa/tag_ksz.c          |  2 +-
- net/dsa/tag_lan9303.c      |  3 ++-
- net/dsa/tag_mtk.c          |  2 +-
- net/dsa/tag_ocelot.c       |  2 +-
- net/dsa/tag_rtl4_a.c       |  2 +-
- net/dsa/tag_sja1105.c      | 20 ++++++++++++++------
- 9 files changed, 47 insertions(+), 17 deletions(-)
-
---- a/net/dsa/dsa_priv.h
-+++ b/net/dsa/dsa_priv.h
-@@ -266,6 +266,20 @@ static inline struct sk_buff *dsa_untag_
- 	return skb;
- }
- 
-+/* If the ingress port offloads the bridge, we mark the frame as autonomously
-+ * forwarded by hardware, so the software bridge doesn't forward in twice, back
-+ * to us, because we already did. However, if we're in fallback mode and we do
-+ * software bridging, we are not offloading it, therefore the dp->bridge_dev
-+ * pointer is not populated, and flooding needs to be done by software (we are
-+ * effectively operating in standalone ports mode).
-+ */
-+static inline void dsa_default_offload_fwd_mark(struct sk_buff *skb)
-+{
-+	struct dsa_port *dp = dsa_slave_to_port(skb->dev);
-+
-+	skb->offload_fwd_mark = !!(dp->bridge_dev);
-+}
-+
- /* switch.c */
- int dsa_switch_register_notifier(struct dsa_switch *ds);
- void dsa_switch_unregister_notifier(struct dsa_switch *ds);
---- a/net/dsa/tag_brcm.c
-+++ b/net/dsa/tag_brcm.c
-@@ -166,7 +166,7 @@ static struct sk_buff *brcm_tag_rcv_ll(s
- 	/* Remove Broadcom tag and update checksum */
- 	skb_pull_rcsum(skb, BRCM_TAG_LEN);
- 
--	skb->offload_fwd_mark = 1;
-+	dsa_default_offload_fwd_mark(skb);
- 
- 	return skb;
- }
-@@ -270,7 +270,7 @@ static struct sk_buff *brcm_leg_tag_rcv(
- 	/* Remove Broadcom tag and update checksum */
- 	skb_pull_rcsum(skb, BRCM_LEG_TAG_LEN);
- 
--	skb->offload_fwd_mark = 1;
-+	dsa_default_offload_fwd_mark(skb);
- 
- 	/* Move the Ethernet DA and SA */
- 	memmove(skb->data - ETH_HLEN,
---- a/net/dsa/tag_ksz.c
-+++ b/net/dsa/tag_ksz.c
-@@ -25,7 +25,7 @@ static struct sk_buff *ksz_common_rcv(st
- 	if (pskb_trim_rcsum(skb, skb->len - len))
- 		return NULL;
- 
--	skb->offload_fwd_mark = true;
-+	dsa_default_offload_fwd_mark(skb);
- 
- 	return skb;
- }
---- a/net/dsa/tag_lan9303.c
-+++ b/net/dsa/tag_lan9303.c
-@@ -115,7 +115,8 @@ static struct sk_buff *lan9303_rcv(struc
- 	skb_pull_rcsum(skb, 2 + 2);
- 	memmove(skb->data - ETH_HLEN, skb->data - (ETH_HLEN + LAN9303_TAG_LEN),
- 		2 * ETH_ALEN);
--	skb->offload_fwd_mark = !(lan9303_tag1 & LAN9303_TAG_RX_TRAPPED_TO_CPU);
-+	if (!(lan9303_tag1 & LAN9303_TAG_RX_TRAPPED_TO_CPU))
-+		dsa_default_offload_fwd_mark(skb);
- 
- 	return skb;
- }
---- a/net/dsa/tag_mtk.c
-+++ b/net/dsa/tag_mtk.c
-@@ -104,7 +104,7 @@ static struct sk_buff *mtk_tag_rcv(struc
- 
- 	/* Only unicast or broadcast frames are offloaded */
- 	if (likely(!is_multicast_skb))
--		skb->offload_fwd_mark = 1;
-+		dsa_default_offload_fwd_mark(skb);
- 
- 	return skb;
- }
---- a/net/dsa/tag_ocelot.c
-+++ b/net/dsa/tag_ocelot.c
-@@ -225,7 +225,7 @@ static struct sk_buff *ocelot_rcv(struct
- 		 */
- 		return NULL;
- 
--	skb->offload_fwd_mark = 1;
-+	dsa_default_offload_fwd_mark(skb);
- 	skb->priority = qos_class;
- 
- 	/* Ocelot switches copy frames unmodified to the CPU. However, it is
---- a/net/dsa/tag_rtl4_a.c
-+++ b/net/dsa/tag_rtl4_a.c
-@@ -115,7 +115,7 @@ static struct sk_buff *rtl4a_tag_rcv(str
- 		skb->data - ETH_HLEN - RTL4_A_HDR_LEN,
- 		2 * ETH_ALEN);
- 
--	skb->offload_fwd_mark = 1;
-+	dsa_default_offload_fwd_mark(skb);
- 
- 	return skb;
- }
diff --git a/target/linux/generic/backport-5.10/745-v5.16-01-net-phy-at803x-add-support-for-qca-8327-A-variant.patch b/target/linux/generic/backport-5.10/745-v5.16-01-net-phy-at803x-add-support-for-qca-8327-A-variant.patch
deleted file mode 100644
index f13b80b53123..000000000000
--- a/target/linux/generic/backport-5.10/745-v5.16-01-net-phy-at803x-add-support-for-qca-8327-A-variant.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From b4df02b562f4aa14ff6811f30e1b4d2159585c59 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 19 Sep 2021 18:28:15 +0200
-Subject: net: phy: at803x: add support for qca 8327 A variant internal phy
-
-For qca8327 internal phy there are 2 different switch variant with 2
-different phy id. Add this missing variant so the internal phy can be
-correctly identified and fixed.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 25 ++++++++++++++++++++-----
- 1 file changed, 20 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -148,7 +148,8 @@
- #define AT803X_PAGE_FIBER		0
- #define AT803X_PAGE_COPPER		1
- 
--#define QCA8327_PHY_ID				0x004dd034
-+#define QCA8327_A_PHY_ID			0x004dd033
-+#define QCA8327_B_PHY_ID			0x004dd034
- #define QCA8337_PHY_ID				0x004dd036
- #define QCA8K_PHY_ID_MASK			0xffffffff
- 
-@@ -1357,10 +1358,23 @@ static struct phy_driver at803x_driver[]
- 	.get_strings = at803x_get_strings,
- 	.get_stats = at803x_get_stats,
- }, {
--	/* QCA8327 */
--	.phy_id = QCA8327_PHY_ID,
-+	/* QCA8327-A from switch QCA8327-AL1A */
-+	.phy_id = QCA8327_A_PHY_ID,
- 	.phy_id_mask = QCA8K_PHY_ID_MASK,
--	.name = "QCA PHY 8327",
-+	.name = "QCA PHY 8327-A",
-+	/* PHY_GBIT_FEATURES */
-+	.probe = at803x_probe,
-+	.flags = PHY_IS_INTERNAL,
-+	.config_init = qca83xx_config_init,
-+	.soft_reset = genphy_soft_reset,
-+	.get_sset_count = at803x_get_sset_count,
-+	.get_strings = at803x_get_strings,
-+	.get_stats = at803x_get_stats,
-+}, {
-+	/* QCA8327-B from switch QCA8327-BL1A */
-+	.phy_id = QCA8327_B_PHY_ID,
-+	.phy_id_mask = QCA8K_PHY_ID_MASK,
-+	.name = "QCA PHY 8327-B",
- 	/* PHY_GBIT_FEATURES */
- 	.probe = at803x_probe,
- 	.flags = PHY_IS_INTERNAL,
-@@ -1380,7 +1394,8 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) },
- 	{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
- 	{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(QCA8327_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) },
- 	{ }
- };
- 
diff --git a/target/linux/generic/backport-5.10/745-v5.16-02-net-phy-at803x-add-resume-suspend-function-to-qca83x.patch b/target/linux/generic/backport-5.10/745-v5.16-02-net-phy-at803x-add-resume-suspend-function-to-qca83x.patch
deleted file mode 100644
index 25b05aa33f70..000000000000
--- a/target/linux/generic/backport-5.10/745-v5.16-02-net-phy-at803x-add-resume-suspend-function-to-qca83x.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 15b9df4ece17d084f14eb0ca1cf05f2ad497e425 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 19 Sep 2021 18:28:16 +0200
-Subject: net: phy: at803x: add resume/suspend function to qca83xx phy
-
-Add resume/suspend function to qca83xx internal phy.
-We can't use the at803x generic function as the documentation lacks of
-any support for WoL regs.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1357,6 +1357,8 @@ static struct phy_driver at803x_driver[]
- 	.get_sset_count = at803x_get_sset_count,
- 	.get_strings = at803x_get_strings,
- 	.get_stats = at803x_get_stats,
-+	.suspend		= genphy_suspend,
-+	.resume			= genphy_resume,
- }, {
- 	/* QCA8327-A from switch QCA8327-AL1A */
- 	.phy_id = QCA8327_A_PHY_ID,
-@@ -1370,6 +1372,8 @@ static struct phy_driver at803x_driver[]
- 	.get_sset_count = at803x_get_sset_count,
- 	.get_strings = at803x_get_strings,
- 	.get_stats = at803x_get_stats,
-+	.suspend		= genphy_suspend,
-+	.resume			= genphy_resume,
- }, {
- 	/* QCA8327-B from switch QCA8327-BL1A */
- 	.phy_id = QCA8327_B_PHY_ID,
-@@ -1383,6 +1387,8 @@ static struct phy_driver at803x_driver[]
- 	.get_sset_count = at803x_get_sset_count,
- 	.get_strings = at803x_get_strings,
- 	.get_stats = at803x_get_stats,
-+	.suspend		= genphy_suspend,
-+	.resume			= genphy_resume,
- }, };
- 
- module_phy_driver(at803x_driver);
diff --git a/target/linux/generic/backport-5.10/745-v5.16-03-net-phy-at803x-fix-spacing-and-improve-name-for-83xx.patch b/target/linux/generic/backport-5.10/745-v5.16-03-net-phy-at803x-fix-spacing-and-improve-name-for-83xx.patch
deleted file mode 100644
index 8e53e0e6396f..000000000000
--- a/target/linux/generic/backport-5.10/745-v5.16-03-net-phy-at803x-fix-spacing-and-improve-name-for-83xx.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From d44fd8604a4ab92119adb35f05fd87612af722b5 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 19 Sep 2021 18:28:17 +0200
-Subject: net: phy: at803x: fix spacing and improve name for 83xx phy
-
-Fix spacing and improve name for 83xx phy following other phy in the
-same driver.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 60 ++++++++++++++++++++++++------------------------
- 1 file changed, 30 insertions(+), 30 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1346,47 +1346,47 @@ static struct phy_driver at803x_driver[]
- 	.config_aneg		= at803x_config_aneg,
- }, {
- 	/* QCA8337 */
--	.phy_id = QCA8337_PHY_ID,
--	.phy_id_mask = QCA8K_PHY_ID_MASK,
--	.name = "QCA PHY 8337",
-+	.phy_id			= QCA8337_PHY_ID,
-+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-+	.name			= "Qualcomm Atheros 8337 internal PHY",
- 	/* PHY_GBIT_FEATURES */
--	.probe = at803x_probe,
--	.flags = PHY_IS_INTERNAL,
--	.config_init = qca83xx_config_init,
--	.soft_reset = genphy_soft_reset,
--	.get_sset_count = at803x_get_sset_count,
--	.get_strings = at803x_get_strings,
--	.get_stats = at803x_get_stats,
-+	.probe			= at803x_probe,
-+	.flags			= PHY_IS_INTERNAL,
-+	.config_init		= qca83xx_config_init,
-+	.soft_reset		= genphy_soft_reset,
-+	.get_sset_count		= at803x_get_sset_count,
-+	.get_strings		= at803x_get_strings,
-+	.get_stats		= at803x_get_stats,
- 	.suspend		= genphy_suspend,
- 	.resume			= genphy_resume,
- }, {
- 	/* QCA8327-A from switch QCA8327-AL1A */
--	.phy_id = QCA8327_A_PHY_ID,
--	.phy_id_mask = QCA8K_PHY_ID_MASK,
--	.name = "QCA PHY 8327-A",
-+	.phy_id			= QCA8327_A_PHY_ID,
-+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-+	.name			= "Qualcomm Atheros 8327-A internal PHY",
- 	/* PHY_GBIT_FEATURES */
--	.probe = at803x_probe,
--	.flags = PHY_IS_INTERNAL,
--	.config_init = qca83xx_config_init,
--	.soft_reset = genphy_soft_reset,
--	.get_sset_count = at803x_get_sset_count,
--	.get_strings = at803x_get_strings,
--	.get_stats = at803x_get_stats,
-+	.probe			= at803x_probe,
-+	.flags			= PHY_IS_INTERNAL,
-+	.config_init		= qca83xx_config_init,
-+	.soft_reset		= genphy_soft_reset,
-+	.get_sset_count		= at803x_get_sset_count,
-+	.get_strings		= at803x_get_strings,
-+	.get_stats		= at803x_get_stats,
- 	.suspend		= genphy_suspend,
- 	.resume			= genphy_resume,
- }, {
- 	/* QCA8327-B from switch QCA8327-BL1A */
--	.phy_id = QCA8327_B_PHY_ID,
--	.phy_id_mask = QCA8K_PHY_ID_MASK,
--	.name = "QCA PHY 8327-B",
-+	.phy_id			= QCA8327_B_PHY_ID,
-+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-+	.name			= "Qualcomm Atheros 8327-B internal PHY",
- 	/* PHY_GBIT_FEATURES */
--	.probe = at803x_probe,
--	.flags = PHY_IS_INTERNAL,
--	.config_init = qca83xx_config_init,
--	.soft_reset = genphy_soft_reset,
--	.get_sset_count = at803x_get_sset_count,
--	.get_strings = at803x_get_strings,
--	.get_stats = at803x_get_stats,
-+	.probe			= at803x_probe,
-+	.flags			= PHY_IS_INTERNAL,
-+	.config_init		= qca83xx_config_init,
-+	.soft_reset		= genphy_soft_reset,
-+	.get_sset_count		= at803x_get_sset_count,
-+	.get_strings		= at803x_get_strings,
-+	.get_stats		= at803x_get_stats,
- 	.suspend		= genphy_suspend,
- 	.resume			= genphy_resume,
- }, };
diff --git a/target/linux/generic/backport-5.10/746-v5.16-01-net-phy-at803x-fix-resume-for-QCA8327-phy.patch b/target/linux/generic/backport-5.10/746-v5.16-01-net-phy-at803x-fix-resume-for-QCA8327-phy.patch
deleted file mode 100644
index 1f803e582b81..000000000000
--- a/target/linux/generic/backport-5.10/746-v5.16-01-net-phy-at803x-fix-resume-for-QCA8327-phy.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From ba3c01ee02ed0d821c9f241f179bbc9457542b8f Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 10 Oct 2021 00:46:15 +0200
-Subject: net: phy: at803x: fix resume for QCA8327 phy
-
-From Documentation phy resume triggers phy reset and restart
-auto-negotiation. Add a dedicated function to wait reset to finish as
-it was notice a regression where port sometime are not reliable after a
-suspend/resume session. The reset wait logic is copied from phy_poll_reset.
-Add dedicated suspend function to use genphy_suspend only with QCA8337
-phy and set only additional debug settings for QCA8327. With more test
-it was reported that QCA8327 doesn't proprely support this mode and
-using this cause the unreliability of the switch ports, especially the
-malfunction of the port0.
-
-Fixes: 15b9df4ece17 ("net: phy: at803x: add resume/suspend function to qca83xx phy")
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 69 +++++++++++++++++++++++++++++++++++++++++++-----
- 1 file changed, 63 insertions(+), 6 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -92,9 +92,14 @@
- #define AT803X_DEBUG_REG_5			0x05
- #define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
- 
-+#define AT803X_DEBUG_REG_HIB_CTRL		0x0b
-+#define   AT803X_DEBUG_HIB_CTRL_SEL_RST_80U	BIT(10)
-+#define   AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE	BIT(13)
-+
- #define AT803X_DEBUG_REG_3C			0x3C
- 
- #define AT803X_DEBUG_REG_3D			0x3D
-+#define   AT803X_DEBUG_GATE_CLK_IN1000		BIT(6)
- 
- #define AT803X_DEBUG_REG_1F			0x1F
- #define AT803X_DEBUG_PLL_ON			BIT(2)
-@@ -1248,6 +1253,58 @@ static int qca83xx_config_init(struct ph
- 	return 0;
- }
- 
-+static int qca83xx_resume(struct phy_device *phydev)
-+{
-+	int ret, val;
-+
-+	/* Skip reset if not suspended */
-+	if (!phydev->suspended)
-+		return 0;
-+
-+	/* Reinit the port, reset values set by suspend */
-+	qca83xx_config_init(phydev);
-+
-+	/* Reset the port on port resume */
-+	phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
-+
-+	/* On resume from suspend the switch execute a reset and
-+	 * restart auto-negotiation. Wait for reset to complete.
-+	 */
-+	ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
-+				    50000, 600000, true);
-+	if (ret)
-+		return ret;
-+
-+	msleep(1);
-+
-+	return 0;
-+}
-+
-+static int qca83xx_suspend(struct phy_device *phydev)
-+{
-+	u16 mask = 0;
-+
-+	/* Only QCA8337 support actual suspend.
-+	 * QCA8327 cause port unreliability when phy suspend
-+	 * is set.
-+	 */
-+	if (phydev->drv->phy_id == QCA8337_PHY_ID) {
-+		genphy_suspend(phydev);
-+	} else {
-+		mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX);
-+		phy_modify(phydev, MII_BMCR, mask, 0);
-+	}
-+
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_3D,
-+			      AT803X_DEBUG_GATE_CLK_IN1000, 0);
-+
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
-+			      AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE |
-+			      AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0);
-+
-+	return 0;
-+}
-+
- static struct phy_driver at803x_driver[] = {
- {
- 	/* Qualcomm Atheros AR8035 */
-@@ -1357,8 +1414,8 @@ static struct phy_driver at803x_driver[]
- 	.get_sset_count		= at803x_get_sset_count,
- 	.get_strings		= at803x_get_strings,
- 	.get_stats		= at803x_get_stats,
--	.suspend		= genphy_suspend,
--	.resume			= genphy_resume,
-+	.suspend		= qca83xx_suspend,
-+	.resume			= qca83xx_resume,
- }, {
- 	/* QCA8327-A from switch QCA8327-AL1A */
- 	.phy_id			= QCA8327_A_PHY_ID,
-@@ -1372,8 +1429,8 @@ static struct phy_driver at803x_driver[]
- 	.get_sset_count		= at803x_get_sset_count,
- 	.get_strings		= at803x_get_strings,
- 	.get_stats		= at803x_get_stats,
--	.suspend		= genphy_suspend,
--	.resume			= genphy_resume,
-+	.suspend		= qca83xx_suspend,
-+	.resume			= qca83xx_resume,
- }, {
- 	/* QCA8327-B from switch QCA8327-BL1A */
- 	.phy_id			= QCA8327_B_PHY_ID,
-@@ -1387,8 +1444,8 @@ static struct phy_driver at803x_driver[]
- 	.get_sset_count		= at803x_get_sset_count,
- 	.get_strings		= at803x_get_strings,
- 	.get_stats		= at803x_get_stats,
--	.suspend		= genphy_suspend,
--	.resume			= genphy_resume,
-+	.suspend		= qca83xx_suspend,
-+	.resume			= qca83xx_resume,
- }, };
- 
- module_phy_driver(at803x_driver);
diff --git a/target/linux/generic/backport-5.10/746-v5.16-02-net-phy-at803x-add-DAC-amplitude-fix-for-8327-phy.patch b/target/linux/generic/backport-5.10/746-v5.16-02-net-phy-at803x-add-DAC-amplitude-fix-for-8327-phy.patch
deleted file mode 100644
index b82b6595faaf..000000000000
--- a/target/linux/generic/backport-5.10/746-v5.16-02-net-phy-at803x-add-DAC-amplitude-fix-for-8327-phy.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 1ca8311949aec5c9447645731ef1c6bc5bd71350 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 10 Oct 2021 00:46:16 +0200
-Subject: net: phy: at803x: add DAC amplitude fix for 8327 phy
-
-QCA8327 internal phy require DAC amplitude adjustement set to +6% with
-100m speed. Also add additional define to report a change of the same
-reg in QCA8337. (different scope it does set 1000m voltage)
-Add link_change_notify function to set the proper amplitude adjustement
-on PHY_RUNNING state and disable on any other state.
-
-Fixes: b4df02b562f4 ("net: phy: at803x: add support for qca 8327 A variant internal phy")
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 33 +++++++++++++++++++++++++++++++++
- 1 file changed, 33 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -87,6 +87,8 @@
- #define AT803X_PSSR_MR_AN_COMPLETE	0x0200
- 
- #define AT803X_DEBUG_REG_0			0x00
-+#define QCA8327_DEBUG_MANU_CTRL_EN		BIT(2)
-+#define QCA8337_DEBUG_MANU_CTRL_EN		GENMASK(3, 2)
- #define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
- 
- #define AT803X_DEBUG_REG_5			0x05
-@@ -1250,9 +1252,37 @@ static int qca83xx_config_init(struct ph
- 		break;
- 	}
- 
-+	/* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
-+	 * Disable on init and enable only with 100m speed following
-+	 * qca original source code.
-+	 */
-+	if (phydev->drv->phy_id == QCA8327_A_PHY_ID ||
-+	    phydev->drv->phy_id == QCA8327_B_PHY_ID)
-+		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
-+
- 	return 0;
- }
- 
-+static void qca83xx_link_change_notify(struct phy_device *phydev)
-+{
-+	/* QCA8337 doesn't require DAC Amplitude adjustement */
-+	if (phydev->drv->phy_id == QCA8337_PHY_ID)
-+		return;
-+
-+	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
-+	if (phydev->state == PHY_RUNNING) {
-+		if (phydev->speed == SPEED_100)
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+					      QCA8327_DEBUG_MANU_CTRL_EN,
-+					      QCA8327_DEBUG_MANU_CTRL_EN);
-+	} else {
-+		/* Reset DAC Amplitude adjustment */
-+		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
-+	}
-+}
-+
- static int qca83xx_resume(struct phy_device *phydev)
- {
- 	int ret, val;
-@@ -1407,6 +1437,7 @@ static struct phy_driver at803x_driver[]
- 	.phy_id_mask		= QCA8K_PHY_ID_MASK,
- 	.name			= "Qualcomm Atheros 8337 internal PHY",
- 	/* PHY_GBIT_FEATURES */
-+	.link_change_notify	= qca83xx_link_change_notify,
- 	.probe			= at803x_probe,
- 	.flags			= PHY_IS_INTERNAL,
- 	.config_init		= qca83xx_config_init,
-@@ -1422,6 +1453,7 @@ static struct phy_driver at803x_driver[]
- 	.phy_id_mask		= QCA8K_PHY_ID_MASK,
- 	.name			= "Qualcomm Atheros 8327-A internal PHY",
- 	/* PHY_GBIT_FEATURES */
-+	.link_change_notify	= qca83xx_link_change_notify,
- 	.probe			= at803x_probe,
- 	.flags			= PHY_IS_INTERNAL,
- 	.config_init		= qca83xx_config_init,
-@@ -1437,6 +1469,7 @@ static struct phy_driver at803x_driver[]
- 	.phy_id_mask		= QCA8K_PHY_ID_MASK,
- 	.name			= "Qualcomm Atheros 8327-B internal PHY",
- 	/* PHY_GBIT_FEATURES */
-+	.link_change_notify	= qca83xx_link_change_notify,
- 	.probe			= at803x_probe,
- 	.flags			= PHY_IS_INTERNAL,
- 	.config_init		= qca83xx_config_init,
diff --git a/target/linux/generic/backport-5.10/746-v5.16-03-net-phy-at803x-enable-prefer-master-for-83xx-interna.patch b/target/linux/generic/backport-5.10/746-v5.16-03-net-phy-at803x-enable-prefer-master-for-83xx-interna.patch
deleted file mode 100644
index 023d203c46e4..000000000000
--- a/target/linux/generic/backport-5.10/746-v5.16-03-net-phy-at803x-enable-prefer-master-for-83xx-interna.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 9d1c29b4028557a496be9c5eb2b4b86063700636 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 10 Oct 2021 00:46:17 +0200
-Subject: net: phy: at803x: enable prefer master for 83xx internal phy
-
-From original QCA source code the port was set to prefer master as port
-type in 1000BASE-T mode. Apply the same settings also here.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1261,6 +1261,9 @@ static int qca83xx_config_init(struct ph
- 		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
- 				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
- 
-+	/* Following original QCA sourcecode set port to prefer master */
-+	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/backport-5.10/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch b/target/linux/generic/backport-5.10/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch
deleted file mode 100644
index f54dc4276a4b..000000000000
--- a/target/linux/generic/backport-5.10/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From 67999555ff42e91de7654488d9a7735bd9e84555 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 10 Oct 2021 00:46:18 +0200
-Subject: net: phy: at803x: better describe debug regs
-
-Give a name to known debug regs from Documentation instead of using
-unknown hex values.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 30 +++++++++++++++---------------
- 1 file changed, 15 insertions(+), 15 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -86,12 +86,12 @@
- #define AT803X_PSSR			0x11	/*PHY-Specific Status Register*/
- #define AT803X_PSSR_MR_AN_COMPLETE	0x0200
- 
--#define AT803X_DEBUG_REG_0			0x00
-+#define AT803X_DEBUG_ANALOG_TEST_CTRL		0x00
- #define QCA8327_DEBUG_MANU_CTRL_EN		BIT(2)
- #define QCA8337_DEBUG_MANU_CTRL_EN		GENMASK(3, 2)
- #define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
- 
--#define AT803X_DEBUG_REG_5			0x05
-+#define AT803X_DEBUG_SYSTEM_CTRL_MODE		0x05
- #define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
- 
- #define AT803X_DEBUG_REG_HIB_CTRL		0x0b
-@@ -100,7 +100,7 @@
- 
- #define AT803X_DEBUG_REG_3C			0x3C
- 
--#define AT803X_DEBUG_REG_3D			0x3D
-+#define AT803X_DEBUG_REG_GREEN			0x3D
- #define   AT803X_DEBUG_GATE_CLK_IN1000		BIT(6)
- 
- #define AT803X_DEBUG_REG_1F			0x1F
-@@ -274,25 +274,25 @@ static int at803x_read_page(struct phy_d
- 
- static int at803x_enable_rx_delay(struct phy_device *phydev)
- {
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0,
- 				     AT803X_DEBUG_RX_CLK_DLY_EN);
- }
- 
- static int at803x_enable_tx_delay(struct phy_device *phydev)
- {
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0,
- 				     AT803X_DEBUG_TX_CLK_DLY_EN);
- }
- 
- static int at803x_disable_rx_delay(struct phy_device *phydev)
- {
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
- 				     AT803X_DEBUG_RX_CLK_DLY_EN, 0);
- }
- 
- static int at803x_disable_tx_delay(struct phy_device *phydev)
- {
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE,
- 				     AT803X_DEBUG_TX_CLK_DLY_EN, 0);
- }
- 
-@@ -1236,9 +1236,9 @@ static int qca83xx_config_init(struct ph
- 	switch (switch_revision) {
- 	case 1:
- 		/* For 100M waveform */
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_0, 0x02ea);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea);
- 		/* Turn on Gigabit clock */
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x68a0);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0);
- 		break;
- 
- 	case 2:
-@@ -1246,8 +1246,8 @@ static int qca83xx_config_init(struct ph
- 		fallthrough;
- 	case 4:
- 		phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x6860);
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_5, 0x2c46);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46);
- 		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000);
- 		break;
- 	}
-@@ -1258,7 +1258,7 @@ static int qca83xx_config_init(struct ph
- 	 */
- 	if (phydev->drv->phy_id == QCA8327_A_PHY_ID ||
- 	    phydev->drv->phy_id == QCA8327_B_PHY_ID)
--		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
- 				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
- 
- 	/* Following original QCA sourcecode set port to prefer master */
-@@ -1276,12 +1276,12 @@ static void qca83xx_link_change_notify(s
- 	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
- 	if (phydev->state == PHY_RUNNING) {
- 		if (phydev->speed == SPEED_100)
--			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
- 					      QCA8327_DEBUG_MANU_CTRL_EN,
- 					      QCA8327_DEBUG_MANU_CTRL_EN);
- 	} else {
- 		/* Reset DAC Amplitude adjustment */
--		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
- 				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
- 	}
- }
-@@ -1328,7 +1328,7 @@ static int qca83xx_suspend(struct phy_de
- 		phy_modify(phydev, MII_BMCR, mask, 0);
- 	}
- 
--	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_3D,
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN,
- 			      AT803X_DEBUG_GATE_CLK_IN1000, 0);
- 
- 	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
diff --git a/target/linux/generic/backport-5.10/747-v5.16-01-dsa-qca8k-add-mac-power-sel-support.patch b/target/linux/generic/backport-5.10/747-v5.16-01-dsa-qca8k-add-mac-power-sel-support.patch
deleted file mode 100644
index c8d424de38c5..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-01-dsa-qca8k-add-mac-power-sel-support.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From d8b6f5bae6d3b648a67b6958cb98e4e97256d652 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:06 +0200
-Subject: dsa: qca8k: add mac_power_sel support
-
-Add missing mac power sel support needed for ipq8064/5 SoC that require
-1.8v for the internal regulator port instead of the default 1.5v.
-If other device needs this, consider adding a dedicated binding to
-support this.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 31 +++++++++++++++++++++++++++++++
- drivers/net/dsa/qca8k.h |  5 +++++
- 2 files changed, 36 insertions(+)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -951,6 +951,33 @@ qca8k_setup_of_rgmii_delay(struct qca8k_
- }
- 
- static int
-+qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
-+{
-+	u32 mask = 0;
-+	int ret = 0;
-+
-+	/* SoC specific settings for ipq8064.
-+	 * If more device require this consider adding
-+	 * a dedicated binding.
-+	 */
-+	if (of_machine_is_compatible("qcom,ipq8064"))
-+		mask |= QCA8K_MAC_PWR_RGMII0_1_8V;
-+
-+	/* SoC specific settings for ipq8065 */
-+	if (of_machine_is_compatible("qcom,ipq8065"))
-+		mask |= QCA8K_MAC_PWR_RGMII1_1_8V;
-+
-+	if (mask) {
-+		ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL,
-+				QCA8K_MAC_PWR_RGMII0_1_8V |
-+				QCA8K_MAC_PWR_RGMII1_1_8V,
-+				mask);
-+	}
-+
-+	return ret;
-+}
-+
-+static int
- qca8k_setup(struct dsa_switch *ds)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-@@ -979,6 +1006,10 @@ qca8k_setup(struct dsa_switch *ds)
- 	if (ret)
- 		return ret;
- 
-+	ret = qca8k_setup_mac_pwr_sel(priv);
-+	if (ret)
-+		return ret;
-+
- 	/* Enable CPU Port */
- 	ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
- 			    QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -100,6 +100,11 @@
- #define   QCA8K_SGMII_MODE_CTRL_PHY			(1 << 22)
- #define   QCA8K_SGMII_MODE_CTRL_MAC			(2 << 22)
- 
-+/* MAC_PWR_SEL registers */
-+#define QCA8K_REG_MAC_PWR_SEL				0x0e4
-+#define   QCA8K_MAC_PWR_RGMII1_1_8V			BIT(18)
-+#define   QCA8K_MAC_PWR_RGMII0_1_8V			BIT(19)
-+
- /* EEE control registers */
- #define QCA8K_REG_EEE_CTRL				0x100
- #define  QCA8K_REG_EEE_CTRL_LPI_EN(_i)			((_i + 1) * 2)
diff --git a/target/linux/generic/backport-5.10/747-v5.16-02-dt-bindings-net-dsa-qca8k-Add-SGMII-clock-phase-prop.patch b/target/linux/generic/backport-5.10/747-v5.16-02-dt-bindings-net-dsa-qca8k-Add-SGMII-clock-phase-prop.patch
deleted file mode 100644
index bd768ec27d4d..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-02-dt-bindings-net-dsa-qca8k-Add-SGMII-clock-phase-prop.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From fdbf35df9c091db9c46e57e9938e3f7a4f603a7c Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:07 +0200
-Subject: dt-bindings: net: dsa: qca8k: Add SGMII clock phase properties
-
-Add names and descriptions of additional PORT0_PAD_CTRL properties.
-qca,sgmii-(rx|tx)clk-falling-edge are for setting the respective clock
-phase to failling edge.
-
-Co-developed-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- Documentation/devicetree/bindings/net/dsa/qca8k.txt | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-@@ -37,6 +37,10 @@ A CPU port node has the following option
-                           managed entity. See
-                           Documentation/devicetree/bindings/net/fixed-link.txt
-                           for details.
-+- qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge.
-+                                Mostly used in qca8327 with CPU port 0 set to
-+                                sgmii.
-+- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge.
- 
- For QCA8K the 'fixed-link' sub-node supports only the following properties:
- 
diff --git a/target/linux/generic/backport-5.10/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch b/target/linux/generic/backport-5.10/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch
deleted file mode 100644
index e464452d82c1..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From 6c43809bf1bee76c434e365a26546a92a5fbec14 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:08 +0200
-Subject: net: dsa: qca8k: add support for sgmii falling edge
-
-Add support for this in the qca8k driver. Also add support for SGMII
-rx/tx clock falling edge. This is only present for pad0, pad5 and
-pad6 have these bit reserved from Documentation. Add a comment that this
-is hardcoded to PAD0 as qca8327/28/34/37 have an unique sgmii line and
-setting falling in port0 applies to both configuration with sgmii used
-for port0 or port6.
-
-Co-developed-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++
- drivers/net/dsa/qca8k.h |  4 ++++
- 2 files changed, 67 insertions(+)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -978,6 +978,42 @@ qca8k_setup_mac_pwr_sel(struct qca8k_pri
- }
- 
- static int
-+qca8k_parse_port_config(struct qca8k_priv *priv)
-+{
-+	struct device_node *port_dn;
-+	phy_interface_t mode;
-+	struct dsa_port *dp;
-+	int port, ret;
-+
-+	/* We have 2 CPU port. Check them */
-+	for (port = 0; port < QCA8K_NUM_PORTS; port++) {
-+		/* Skip every other port */
-+		if (port != 0 && port != 6)
-+			continue;
-+
-+		dp = dsa_to_port(priv->ds, port);
-+		port_dn = dp->dn;
-+
-+		if (!of_device_is_available(port_dn))
-+			continue;
-+
-+		ret = of_get_phy_mode(port_dn, &mode);
-+		if (ret)
-+			continue;
-+
-+		if (mode == PHY_INTERFACE_MODE_SGMII) {
-+			if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
-+				priv->sgmii_tx_clk_falling_edge = true;
-+
-+			if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
-+				priv->sgmii_rx_clk_falling_edge = true;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int
- qca8k_setup(struct dsa_switch *ds)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-@@ -990,6 +1026,11 @@ qca8k_setup(struct dsa_switch *ds)
- 		return -EINVAL;
- 	}
- 
-+	/* Parse CPU port config to be later used in phy_link mac_config */
-+	ret = qca8k_parse_port_config(priv);
-+	if (ret)
-+		return ret;
-+
- 	mutex_init(&priv->reg_mutex);
- 
- 	/* Start by setting up the register mapping */
-@@ -1274,6 +1315,28 @@ qca8k_phylink_mac_config(struct dsa_swit
- 		}
- 
- 		qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
-+
-+		/* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
-+		 * falling edge is set writing in the PORT0 PAD reg
-+		 */
-+		if (priv->switch_id == QCA8K_ID_QCA8327 ||
-+		    priv->switch_id == QCA8K_ID_QCA8337)
-+			reg = QCA8K_REG_PORT0_PAD_CTRL;
-+
-+		val = 0;
-+
-+		/* SGMII Clock phase configuration */
-+		if (priv->sgmii_rx_clk_falling_edge)
-+			val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
-+
-+		if (priv->sgmii_tx_clk_falling_edge)
-+			val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
-+
-+		if (val)
-+			ret = qca8k_rmw(priv, reg,
-+					QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
-+					QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
-+					val);
- 		break;
- 	default:
- 		dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -35,6 +35,8 @@
- #define   QCA8K_MASK_CTRL_DEVICE_ID_MASK		GENMASK(15, 8)
- #define   QCA8K_MASK_CTRL_DEVICE_ID(x)			((x) >> 8)
- #define QCA8K_REG_PORT0_PAD_CTRL			0x004
-+#define   QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE	BIT(19)
-+#define   QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE	BIT(18)
- #define QCA8K_REG_PORT5_PAD_CTRL			0x008
- #define QCA8K_REG_PORT6_PAD_CTRL			0x00c
- #define   QCA8K_PORT_PAD_RGMII_EN			BIT(26)
-@@ -260,6 +262,8 @@ struct qca8k_priv {
- 	u8 switch_revision;
- 	u8 rgmii_tx_delay;
- 	u8 rgmii_rx_delay;
-+	bool sgmii_rx_clk_falling_edge;
-+	bool sgmii_tx_clk_falling_edge;
- 	bool legacy_phy_port_mapping;
- 	struct regmap *regmap;
- 	struct mii_bus *bus;
diff --git a/target/linux/generic/backport-5.10/747-v5.16-04-dt-bindings-net-dsa-qca8k-Document-support-for-CPU-p.patch b/target/linux/generic/backport-5.10/747-v5.16-04-dt-bindings-net-dsa-qca8k-Document-support-for-CPU-p.patch
deleted file mode 100644
index 606ac0af3da2..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-04-dt-bindings-net-dsa-qca8k-Document-support-for-CPU-p.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 731d613338ec6de482053ffa3f71be2325b0f8eb Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:09 +0200
-Subject: dt-bindings: net: dsa: qca8k: Document support for CPU port 6
-
-The switch now support CPU port to be set 6 instead of be hardcoded to
-0. Document support for it and describe logic selection.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- Documentation/devicetree/bindings/net/dsa/qca8k.txt | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-@@ -29,7 +29,11 @@ the mdio MASTER is used as communication
- Don't use mixed external and internal mdio-bus configurations, as this is
- not supported by the hardware.
- 
--The CPU port of this switch is always port 0.
-+This switch support 2 CPU port. Normally and advised configuration is with
-+CPU port set to port 0. It is also possible to set the CPU port to port 6
-+if the device requires it. The driver will configure the switch to the defined
-+port. With both CPU port declared the first CPU port is selected as primary
-+and the secondary CPU ignored.
- 
- A CPU port node has the following optional node:
- 
diff --git a/target/linux/generic/backport-5.10/747-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch b/target/linux/generic/backport-5.10/747-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch
deleted file mode 100644
index 320db8fa9f9f..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-From 3fcf734aa482487df83cf8f18608438fcf59127f Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:10 +0200
-Subject: net: dsa: qca8k: add support for cpu port 6
-
-Currently CPU port is always hardcoded to port 0. This switch have 2 CPU
-ports. The original intention of this driver seems to be use the
-mac06_exchange bit to swap MAC0 with MAC6 in the strange configuration
-where device have connected only the CPU port 6. To skip the
-introduction of a new binding, rework the driver to address the
-secondary CPU port as primary and drop any reference of hardcoded port.
-With configuration of mac06 exchange, just skip the definition of port0
-and define the CPU port as a secondary. The driver will autoconfigure
-the switch to use that as the primary CPU port.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 51 ++++++++++++++++++++++++++++++++++---------------
- drivers/net/dsa/qca8k.h |  2 --
- 2 files changed, 36 insertions(+), 17 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -977,6 +977,22 @@ qca8k_setup_mac_pwr_sel(struct qca8k_pri
- 	return ret;
- }
- 
-+static int qca8k_find_cpu_port(struct dsa_switch *ds)
-+{
-+	struct qca8k_priv *priv = ds->priv;
-+
-+	/* Find the connected cpu port. Valid port are 0 or 6 */
-+	if (dsa_is_cpu_port(ds, 0))
-+		return 0;
-+
-+	dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6");
-+
-+	if (dsa_is_cpu_port(ds, 6))
-+		return 6;
-+
-+	return -EINVAL;
-+}
-+
- static int
- qca8k_parse_port_config(struct qca8k_priv *priv)
- {
-@@ -1017,13 +1033,13 @@ static int
- qca8k_setup(struct dsa_switch *ds)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
--	int ret, i;
-+	int cpu_port, ret, i;
- 	u32 mask;
- 
--	/* Make sure that port 0 is the cpu port */
--	if (!dsa_is_cpu_port(ds, 0)) {
--		dev_err(priv->dev, "port 0 is not the CPU port");
--		return -EINVAL;
-+	cpu_port = qca8k_find_cpu_port(ds);
-+	if (cpu_port < 0) {
-+		dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6");
-+		return cpu_port;
- 	}
- 
- 	/* Parse CPU port config to be later used in phy_link mac_config */
-@@ -1065,7 +1081,7 @@ qca8k_setup(struct dsa_switch *ds)
- 		dev_warn(priv->dev, "mib init failed");
- 
- 	/* Enable QCA header mode on the cpu port */
--	ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT),
-+	ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port),
- 			  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
- 			  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
- 	if (ret) {
-@@ -1087,10 +1103,10 @@ qca8k_setup(struct dsa_switch *ds)
- 
- 	/* Forward all unknown frames to CPU port for Linux processing */
- 	ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
--			  BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
--			  BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
--			  BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
--			  BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
-+			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
-+			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
-+			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
-+			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
- 	if (ret)
- 		return ret;
- 
-@@ -1098,7 +1114,7 @@ qca8k_setup(struct dsa_switch *ds)
- 	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
- 		/* CPU port gets connected to all user ports of the switch */
- 		if (dsa_is_cpu_port(ds, i)) {
--			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
-+			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port),
- 					QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
- 			if (ret)
- 				return ret;
-@@ -1110,7 +1126,7 @@ qca8k_setup(struct dsa_switch *ds)
- 
- 			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
- 					QCA8K_PORT_LOOKUP_MEMBER,
--					BIT(QCA8K_CPU_PORT));
-+					BIT(cpu_port));
- 			if (ret)
- 				return ret;
- 
-@@ -1616,9 +1632,12 @@ static int
- qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
--	int port_mask = BIT(QCA8K_CPU_PORT);
-+	int port_mask, cpu_port;
- 	int i, ret;
- 
-+	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
-+	port_mask = BIT(cpu_port);
-+
- 	for (i = 1; i < QCA8K_NUM_PORTS; i++) {
- 		if (dsa_to_port(ds, i)->bridge_dev != br)
- 			continue;
-@@ -1645,7 +1664,9 @@ static void
- qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
--	int i;
-+	int cpu_port, i;
-+
-+	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
- 
- 	for (i = 1; i < QCA8K_NUM_PORTS; i++) {
- 		if (dsa_to_port(ds, i)->bridge_dev != br)
-@@ -1662,7 +1683,7 @@ qca8k_port_bridge_leave(struct dsa_switc
- 	 * this port
- 	 */
- 	qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
--		  QCA8K_PORT_LOOKUP_MEMBER, BIT(QCA8K_CPU_PORT));
-+		  QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port));
- }
- 
- static int
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -24,8 +24,6 @@
- 
- #define QCA8K_NUM_FDB_RECORDS				2048
- 
--#define QCA8K_CPU_PORT					0
--
- #define QCA8K_PORT_VID_DEF				1
- 
- /* Global control registers */
diff --git a/target/linux/generic/backport-5.10/747-v5.16-06-net-dsa-qca8k-rework-rgmii-delay-logic-and-scan-for-.patch b/target/linux/generic/backport-5.10/747-v5.16-06-net-dsa-qca8k-rework-rgmii-delay-logic-and-scan-for-.patch
deleted file mode 100644
index de201764f987..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-06-net-dsa-qca8k-rework-rgmii-delay-logic-and-scan-for-.patch
+++ /dev/null
@@ -1,295 +0,0 @@
-From 5654ec78dd7e64b1e04777b24007344329e6a63b Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:11 +0200
-Subject: net: dsa: qca8k: rework rgmii delay logic and scan for cpu port 6
-
-Future proof commit. This switch have 2 CPU ports and one valid
-configuration is first CPU port set to sgmii and second CPU port set to
-rgmii-id. The current implementation detects delay only for CPU port
-zero set to rgmii and doesn't count any delay set in a secondary CPU
-port. Drop the current delay scan function and move it to the sgmii
-parser function to generalize and implicitly add support for secondary
-CPU port set to rgmii-id. Introduce new logic where delay is enabled
-also with internal delay binding declared and rgmii set as PHY mode.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 165 ++++++++++++++++++++++++------------------------
- drivers/net/dsa/qca8k.h |  10 ++-
- 2 files changed, 89 insertions(+), 86 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -889,68 +889,6 @@ qca8k_setup_mdio_bus(struct qca8k_priv *
- }
- 
- static int
--qca8k_setup_of_rgmii_delay(struct qca8k_priv *priv)
--{
--	struct device_node *port_dn;
--	phy_interface_t mode;
--	struct dsa_port *dp;
--	u32 val;
--
--	/* CPU port is already checked */
--	dp = dsa_to_port(priv->ds, 0);
--
--	port_dn = dp->dn;
--
--	/* Check if port 0 is set to the correct type */
--	of_get_phy_mode(port_dn, &mode);
--	if (mode != PHY_INTERFACE_MODE_RGMII_ID &&
--	    mode != PHY_INTERFACE_MODE_RGMII_RXID &&
--	    mode != PHY_INTERFACE_MODE_RGMII_TXID) {
--		return 0;
--	}
--
--	switch (mode) {
--	case PHY_INTERFACE_MODE_RGMII_ID:
--	case PHY_INTERFACE_MODE_RGMII_RXID:
--		if (of_property_read_u32(port_dn, "rx-internal-delay-ps", &val))
--			val = 2;
--		else
--			/* Switch regs accept value in ns, convert ps to ns */
--			val = val / 1000;
--
--		if (val > QCA8K_MAX_DELAY) {
--			dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
--			val = 3;
--		}
--
--		priv->rgmii_rx_delay = val;
--		/* Stop here if we need to check only for rx delay */
--		if (mode != PHY_INTERFACE_MODE_RGMII_ID)
--			break;
--
--		fallthrough;
--	case PHY_INTERFACE_MODE_RGMII_TXID:
--		if (of_property_read_u32(port_dn, "tx-internal-delay-ps", &val))
--			val = 1;
--		else
--			/* Switch regs accept value in ns, convert ps to ns */
--			val = val / 1000;
--
--		if (val > QCA8K_MAX_DELAY) {
--			dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
--			val = 3;
--		}
--
--		priv->rgmii_tx_delay = val;
--		break;
--	default:
--		return 0;
--	}
--
--	return 0;
--}
--
--static int
- qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
- {
- 	u32 mask = 0;
-@@ -996,19 +934,21 @@ static int qca8k_find_cpu_port(struct ds
- static int
- qca8k_parse_port_config(struct qca8k_priv *priv)
- {
-+	int port, cpu_port_index = 0, ret;
- 	struct device_node *port_dn;
- 	phy_interface_t mode;
- 	struct dsa_port *dp;
--	int port, ret;
-+	u32 delay;
- 
- 	/* We have 2 CPU port. Check them */
--	for (port = 0; port < QCA8K_NUM_PORTS; port++) {
-+	for (port = 0; port < QCA8K_NUM_PORTS && cpu_port_index < QCA8K_NUM_CPU_PORTS; port++) {
- 		/* Skip every other port */
- 		if (port != 0 && port != 6)
- 			continue;
- 
- 		dp = dsa_to_port(priv->ds, port);
- 		port_dn = dp->dn;
-+		cpu_port_index++;
- 
- 		if (!of_device_is_available(port_dn))
- 			continue;
-@@ -1017,12 +957,54 @@ qca8k_parse_port_config(struct qca8k_pri
- 		if (ret)
- 			continue;
- 
--		if (mode == PHY_INTERFACE_MODE_SGMII) {
-+		switch (mode) {
-+		case PHY_INTERFACE_MODE_RGMII:
-+		case PHY_INTERFACE_MODE_RGMII_ID:
-+		case PHY_INTERFACE_MODE_RGMII_TXID:
-+		case PHY_INTERFACE_MODE_RGMII_RXID:
-+			delay = 0;
-+
-+			if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay))
-+				/* Switch regs accept value in ns, convert ps to ns */
-+				delay = delay / 1000;
-+			else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
-+				 mode == PHY_INTERFACE_MODE_RGMII_TXID)
-+				delay = 1;
-+
-+			if (delay > QCA8K_MAX_DELAY) {
-+				dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
-+				delay = 3;
-+			}
-+
-+			priv->rgmii_tx_delay[cpu_port_index] = delay;
-+
-+			delay = 0;
-+
-+			if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay))
-+				/* Switch regs accept value in ns, convert ps to ns */
-+				delay = delay / 1000;
-+			else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
-+				 mode == PHY_INTERFACE_MODE_RGMII_RXID)
-+				delay = 2;
-+
-+			if (delay > QCA8K_MAX_DELAY) {
-+				dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
-+				delay = 3;
-+			}
-+
-+			priv->rgmii_rx_delay[cpu_port_index] = delay;
-+
-+			break;
-+		case PHY_INTERFACE_MODE_SGMII:
- 			if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
- 				priv->sgmii_tx_clk_falling_edge = true;
- 
- 			if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
- 				priv->sgmii_rx_clk_falling_edge = true;
-+
-+			break;
-+		default:
-+			continue;
- 		}
- 	}
- 
-@@ -1059,10 +1041,6 @@ qca8k_setup(struct dsa_switch *ds)
- 	if (ret)
- 		return ret;
- 
--	ret = qca8k_setup_of_rgmii_delay(priv);
--	if (ret)
--		return ret;
--
- 	ret = qca8k_setup_mac_pwr_sel(priv);
- 	if (ret)
- 		return ret;
-@@ -1229,8 +1207,8 @@ qca8k_phylink_mac_config(struct dsa_swit
- 			 const struct phylink_link_state *state)
- {
- 	struct qca8k_priv *priv = ds->priv;
--	u32 reg, val;
--	int ret;
-+	int cpu_port_index, ret;
-+	u32 reg, val, delay;
- 
- 	switch (port) {
- 	case 0: /* 1st CPU port */
-@@ -1242,6 +1220,7 @@ qca8k_phylink_mac_config(struct dsa_swit
- 			return;
- 
- 		reg = QCA8K_REG_PORT0_PAD_CTRL;
-+		cpu_port_index = QCA8K_CPU_PORT0;
- 		break;
- 	case 1:
- 	case 2:
-@@ -1260,6 +1239,7 @@ qca8k_phylink_mac_config(struct dsa_swit
- 			return;
- 
- 		reg = QCA8K_REG_PORT6_PAD_CTRL;
-+		cpu_port_index = QCA8K_CPU_PORT6;
- 		break;
- 	default:
- 		dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
-@@ -1274,23 +1254,40 @@ qca8k_phylink_mac_config(struct dsa_swit
- 
- 	switch (state->interface) {
- 	case PHY_INTERFACE_MODE_RGMII:
--		/* RGMII mode means no delay so don't enable the delay */
--		qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN);
--		break;
- 	case PHY_INTERFACE_MODE_RGMII_ID:
- 	case PHY_INTERFACE_MODE_RGMII_TXID:
- 	case PHY_INTERFACE_MODE_RGMII_RXID:
--		/* RGMII_ID needs internal delay. This is enabled through
--		 * PORT5_PAD_CTRL for all ports, rather than individual port
--		 * registers
-+		val = QCA8K_PORT_PAD_RGMII_EN;
-+
-+		/* Delay can be declared in 3 different way.
-+		 * Mode to rgmii and internal-delay standard binding defined
-+		 * rgmii-id or rgmii-tx/rx phy mode set.
-+		 * The parse logic set a delay different than 0 only when one
-+		 * of the 3 different way is used. In all other case delay is
-+		 * not enabled. With ID or TX/RXID delay is enabled and set
-+		 * to the default and recommended value.
-+		 */
-+		if (priv->rgmii_tx_delay[cpu_port_index]) {
-+			delay = priv->rgmii_tx_delay[cpu_port_index];
-+
-+			val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
-+			       QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
-+		}
-+
-+		if (priv->rgmii_rx_delay[cpu_port_index]) {
-+			delay = priv->rgmii_rx_delay[cpu_port_index];
-+
-+			val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
-+			       QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
-+		}
-+
-+		/* Set RGMII delay based on the selected values */
-+		qca8k_write(priv, reg, val);
-+
-+		/* QCA8337 requires to set rgmii rx delay for all ports.
-+		 * This is enabled through PORT5_PAD_CTRL for all ports,
-+		 * rather than individual port registers.
- 		 */
--		qca8k_write(priv, reg,
--			    QCA8K_PORT_PAD_RGMII_EN |
--			    QCA8K_PORT_PAD_RGMII_TX_DELAY(priv->rgmii_tx_delay) |
--			    QCA8K_PORT_PAD_RGMII_RX_DELAY(priv->rgmii_rx_delay) |
--			    QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
--			    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
--		/* QCA8337 requires to set rgmii rx delay */
- 		if (priv->switch_id == QCA8K_ID_QCA8337)
- 			qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
- 				    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -13,6 +13,7 @@
- #include <linux/gpio.h>
- 
- #define QCA8K_NUM_PORTS					7
-+#define QCA8K_NUM_CPU_PORTS				2
- #define QCA8K_MAX_MTU					9000
- 
- #define PHY_ID_QCA8327					0x004dd034
-@@ -255,13 +256,18 @@ struct qca8k_match_data {
- 	u8 id;
- };
- 
-+enum {
-+	QCA8K_CPU_PORT0,
-+	QCA8K_CPU_PORT6,
-+};
-+
- struct qca8k_priv {
- 	u8 switch_id;
- 	u8 switch_revision;
--	u8 rgmii_tx_delay;
--	u8 rgmii_rx_delay;
- 	bool sgmii_rx_clk_falling_edge;
- 	bool sgmii_tx_clk_falling_edge;
-+	u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
-+	u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
- 	bool legacy_phy_port_mapping;
- 	struct regmap *regmap;
- 	struct mii_bus *bus;
diff --git a/target/linux/generic/backport-5.10/747-v5.16-07-dt-bindings-net-dsa-qca8k-Document-qca-sgmii-enable-.patch b/target/linux/generic/backport-5.10/747-v5.16-07-dt-bindings-net-dsa-qca8k-Document-qca-sgmii-enable-.patch
deleted file mode 100644
index 8abd264e794f..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-07-dt-bindings-net-dsa-qca8k-Document-qca-sgmii-enable-.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 13ad5ccc093ff448b99ac7e138e91e78796adb48 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:12 +0200
-Subject: dt-bindings: net: dsa: qca8k: Document qca,sgmii-enable-pll
-
-Document qca,sgmii-enable-pll binding used in the CPU nodes to
-enable SGMII PLL on MAC config.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- Documentation/devicetree/bindings/net/dsa/qca8k.txt | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-@@ -45,6 +45,16 @@ A CPU port node has the following option
-                                 Mostly used in qca8327 with CPU port 0 set to
-                                 sgmii.
- - qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge.
-+- qca,sgmii-enable-pll  : For SGMII CPU port, explicitly enable PLL, TX and RX
-+                          chain along with Signal Detection.
-+                          This should NOT be enabled for qca8327. If enabled with
-+                          qca8327 the sgmii port won't correctly init and an err
-+                          is printed.
-+                          This can be required for qca8337 switch with revision 2.
-+                          A warning is displayed when used with revision greater
-+                          2.
-+                          With CPU port set to sgmii and qca8337 it is advised
-+                          to set this unless a communication problem is observed.
- 
- For QCA8K the 'fixed-link' sub-node supports only the following properties:
- 
diff --git a/target/linux/generic/backport-5.10/747-v5.16-08-net-dsa-qca8k-add-explicit-SGMII-PLL-enable.patch b/target/linux/generic/backport-5.10/747-v5.16-08-net-dsa-qca8k-add-explicit-SGMII-PLL-enable.patch
deleted file mode 100644
index 2b5a84a1b0e8..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-08-net-dsa-qca8k-add-explicit-SGMII-PLL-enable.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From bbc4799e8bb6c397e3b3fec13de68e179f5db9ff Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:13 +0200
-Subject: net: dsa: qca8k: add explicit SGMII PLL enable
-
-Support enabling PLL on the SGMII CPU port. Some device require this
-special configuration or no traffic is transmitted and the switch
-doesn't work at all. A dedicated binding is added to the CPU node
-port to apply the correct reg on mac config.
-Fail to correctly configure sgmii with qca8327 switch and warn if pll is
-used on qca8337 with a revision greater than 1.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 19 +++++++++++++++++--
- drivers/net/dsa/qca8k.h |  1 +
- 2 files changed, 18 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1002,6 +1002,18 @@ qca8k_parse_port_config(struct qca8k_pri
- 			if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
- 				priv->sgmii_rx_clk_falling_edge = true;
- 
-+			if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) {
-+				priv->sgmii_enable_pll = true;
-+
-+				if (priv->switch_id == QCA8K_ID_QCA8327) {
-+					dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling");
-+					priv->sgmii_enable_pll = false;
-+				}
-+
-+				if (priv->switch_revision < 2)
-+					dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more.");
-+			}
-+
- 			break;
- 		default:
- 			continue;
-@@ -1312,8 +1324,11 @@ qca8k_phylink_mac_config(struct dsa_swit
- 		if (ret)
- 			return;
- 
--		val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
--			QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD;
-+		val |= QCA8K_SGMII_EN_SD;
-+
-+		if (priv->sgmii_enable_pll)
-+			val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
-+			       QCA8K_SGMII_EN_TX;
- 
- 		if (dsa_is_cpu_port(ds, port)) {
- 			/* CPU port, we're talking to the CPU MAC, be a PHY */
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -266,6 +266,7 @@ struct qca8k_priv {
- 	u8 switch_revision;
- 	bool sgmii_rx_clk_falling_edge;
- 	bool sgmii_tx_clk_falling_edge;
-+	bool sgmii_enable_pll;
- 	u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
- 	u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
- 	bool legacy_phy_port_mapping;
diff --git a/target/linux/generic/backport-5.10/747-v5.16-09-dt-bindings-net-dsa-qca8k-Document-qca-led-open-drai.patch b/target/linux/generic/backport-5.10/747-v5.16-09-dt-bindings-net-dsa-qca8k-Document-qca-led-open-drai.patch
deleted file mode 100644
index 38dc954e8cb5..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-09-dt-bindings-net-dsa-qca8k-Document-qca-led-open-drai.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 924087c5c3d41553700b0eb83ca2a53b91643dca Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:14 +0200
-Subject: dt-bindings: net: dsa: qca8k: Document qca,led-open-drain binding
-
-Document new binding qca,ignore-power-on-sel used to ignore
-power on strapping and use sw regs instead.
-Document qca,led-open.drain to set led to open drain mode, the
-qca,ignore-power-on-sel is mandatory with this enabled or an error will
-be reported.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- Documentation/devicetree/bindings/net/dsa/qca8k.txt | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-@@ -13,6 +13,17 @@ Required properties:
- Optional properties:
- 
- - reset-gpios: GPIO to be used to reset the whole device
-+- qca,ignore-power-on-sel: Ignore power on pin strapping to configure led open
-+                           drain or eeprom presence. This is needed for broken
-+                           devices that have wrong configuration or when the oem
-+                           decided to not use pin strapping and fallback to sw
-+                           regs.
-+- qca,led-open-drain: Set leds to open-drain mode. This requires the
-+                      qca,ignore-power-on-sel to be set or the driver will fail
-+                      to probe. This is needed if the oem doesn't use pin
-+                      strapping to set this mode and prefers to set it using sw
-+                      regs. The pin strapping related to led open drain mode is
-+                      the pin B68 for QCA832x and B49 for QCA833x
- 
- Subnodes:
- 
diff --git a/target/linux/generic/backport-5.10/747-v5.16-10-net-dsa-qca8k-add-support-for-pws-config-reg.patch b/target/linux/generic/backport-5.10/747-v5.16-10-net-dsa-qca8k-add-support-for-pws-config-reg.patch
deleted file mode 100644
index aa5d92a4fdec..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-10-net-dsa-qca8k-add-support-for-pws-config-reg.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 362bb238d8bf1470424214a8a5968d9c6cce68fa Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:15 +0200
-Subject: net: dsa: qca8k: add support for pws config reg
-
-Some qca8327 switch require to force the ignore of power on sel
-strapping. Some switch require to set the led open drain mode in regs
-instead of using strapping. While most of the device implements this
-using the correct way using pin strapping, there are still some broken
-device that require to be set using sw regs.
-Introduce a new binding and support these special configuration.
-As led open drain require to ignore pin strapping to work, the probe
-fails with EINVAL error with incorrect configuration.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 39 +++++++++++++++++++++++++++++++++++++++
- drivers/net/dsa/qca8k.h |  6 ++++++
- 2 files changed, 45 insertions(+)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -932,6 +932,41 @@ static int qca8k_find_cpu_port(struct ds
- }
- 
- static int
-+qca8k_setup_of_pws_reg(struct qca8k_priv *priv)
-+{
-+	struct device_node *node = priv->dev->of_node;
-+	u32 val = 0;
-+	int ret;
-+
-+	/* QCA8327 require to set to the correct mode.
-+	 * His bigger brother QCA8328 have the 172 pin layout.
-+	 * Should be applied by default but we set this just to make sure.
-+	 */
-+	if (priv->switch_id == QCA8K_ID_QCA8327) {
-+		ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN,
-+				QCA8327_PWS_PACKAGE148_EN);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	if (of_property_read_bool(node, "qca,ignore-power-on-sel"))
-+		val |= QCA8K_PWS_POWER_ON_SEL;
-+
-+	if (of_property_read_bool(node, "qca,led-open-drain")) {
-+		if (!(val & QCA8K_PWS_POWER_ON_SEL)) {
-+			dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set.");
-+			return -EINVAL;
-+		}
-+
-+		val |= QCA8K_PWS_LED_OPEN_EN_CSR;
-+	}
-+
-+	return qca8k_rmw(priv, QCA8K_REG_PWS,
-+			QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL,
-+			val);
-+}
-+
-+static int
- qca8k_parse_port_config(struct qca8k_priv *priv)
- {
- 	int port, cpu_port_index = 0, ret;
-@@ -1053,6 +1088,10 @@ qca8k_setup(struct dsa_switch *ds)
- 	if (ret)
- 		return ret;
- 
-+	ret = qca8k_setup_of_pws_reg(priv);
-+	if (ret)
-+		return ret;
-+
- 	ret = qca8k_setup_mac_pwr_sel(priv);
- 	if (ret)
- 		return ret;
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -46,6 +46,12 @@
- #define   QCA8K_MAX_DELAY				3
- #define   QCA8K_PORT_PAD_SGMII_EN			BIT(7)
- #define QCA8K_REG_PWS					0x010
-+#define   QCA8K_PWS_POWER_ON_SEL			BIT(31)
-+/* This reg is only valid for QCA832x and toggle the package
-+ * type from 176 pin (by default) to 148 pin used on QCA8327
-+ */
-+#define   QCA8327_PWS_PACKAGE148_EN			BIT(30)
-+#define   QCA8K_PWS_LED_OPEN_EN_CSR			BIT(24)
- #define   QCA8K_PWS_SERDES_AEN_DIS			BIT(7)
- #define QCA8K_REG_MODULE_EN				0x030
- #define   QCA8K_MODULE_EN_MIB				BIT(0)
diff --git a/target/linux/generic/backport-5.10/747-v5.16-11-dt-bindings-net-dsa-qca8k-document-support-for-qca83.patch b/target/linux/generic/backport-5.10/747-v5.16-11-dt-bindings-net-dsa-qca8k-document-support-for-qca83.patch
deleted file mode 100644
index 1bfb00c5b2c6..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-11-dt-bindings-net-dsa-qca8k-document-support-for-qca83.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From ed7988d77fbfb79366b68f9e7fa60a6080da23d4 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:16 +0200
-Subject: dt-bindings: net: dsa: qca8k: document support for qca8328
-
-QCA8328 is the bigger brother of qca8327. Document the new compatible
-binding and add some information to understand the various switch
-compatible.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- Documentation/devicetree/bindings/net/dsa/qca8k.txt | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
---- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-@@ -3,9 +3,10 @@
- Required properties:
- 
- - compatible: should be one of:
--    "qca,qca8327"
--    "qca,qca8334"
--    "qca,qca8337"
-+    "qca,qca8328": referenced as AR8328(N)-AK1(A/B) QFN 176 pin package
-+    "qca,qca8327": referenced as AR8327(N)-AL1A DR-QFN 148 pin package
-+    "qca,qca8334": referenced as QCA8334-AL3C QFN 88 pin package
-+    "qca,qca8337": referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package
- 
- - #size-cells: must be 0
- - #address-cells: must be 1
diff --git a/target/linux/generic/backport-5.10/747-v5.16-12-net-dsa-qca8k-add-support-for-QCA8328.patch b/target/linux/generic/backport-5.10/747-v5.16-12-net-dsa-qca8k-add-support-for-QCA8328.patch
deleted file mode 100644
index 6e118f5a146e..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-12-net-dsa-qca8k-add-support-for-QCA8328.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From f477d1c8bdbef4f400718238e350f16f521d2a3e Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:17 +0200
-Subject: net: dsa: qca8k: add support for QCA8328
-
-QCA8328 switch is the bigger brother of the qca8327. Same regs different
-chip. Change the function to set the correct pin layout and introduce a
-new match_data to differentiate the 2 switch as they have the same ID
-and their internal PHY have the same ID.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 19 ++++++++++++++++---
- drivers/net/dsa/qca8k.h |  1 +
- 2 files changed, 17 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -935,6 +935,7 @@ static int
- qca8k_setup_of_pws_reg(struct qca8k_priv *priv)
- {
- 	struct device_node *node = priv->dev->of_node;
-+	const struct qca8k_match_data *data;
- 	u32 val = 0;
- 	int ret;
- 
-@@ -943,8 +944,14 @@ qca8k_setup_of_pws_reg(struct qca8k_priv
- 	 * Should be applied by default but we set this just to make sure.
- 	 */
- 	if (priv->switch_id == QCA8K_ID_QCA8327) {
-+		data = of_device_get_match_data(priv->dev);
-+
-+		/* Set the correct package of 148 pin for QCA8327 */
-+		if (data->reduced_package)
-+			val |= QCA8327_PWS_PACKAGE148_EN;
-+
- 		ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN,
--				QCA8327_PWS_PACKAGE148_EN);
-+				val);
- 		if (ret)
- 			return ret;
- 	}
-@@ -2098,7 +2105,12 @@ static int qca8k_resume(struct device *d
- static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
- 			 qca8k_suspend, qca8k_resume);
- 
--static const struct qca8k_match_data qca832x = {
-+static const struct qca8k_match_data qca8327 = {
-+	.id = QCA8K_ID_QCA8327,
-+	.reduced_package = true,
-+};
-+
-+static const struct qca8k_match_data qca8328 = {
- 	.id = QCA8K_ID_QCA8327,
- };
- 
-@@ -2107,7 +2119,8 @@ static const struct qca8k_match_data qca
- };
- 
- static const struct of_device_id qca8k_of_match[] = {
--	{ .compatible = "qca,qca8327", .data = &qca832x },
-+	{ .compatible = "qca,qca8327", .data = &qca8327 },
-+	{ .compatible = "qca,qca8328", .data = &qca8328 },
- 	{ .compatible = "qca,qca8334", .data = &qca833x },
- 	{ .compatible = "qca,qca8337", .data = &qca833x },
- 	{ /* sentinel */ },
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -260,6 +260,7 @@ struct ar8xxx_port_status {
- 
- struct qca8k_match_data {
- 	u8 id;
-+	bool reduced_package;
- };
- 
- enum {
diff --git a/target/linux/generic/backport-5.10/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch b/target/linux/generic/backport-5.10/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch
deleted file mode 100644
index 27f94dca0270..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From cef08115846e581f80ff99abf7bf218da1840616 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:18 +0200
-Subject: net: dsa: qca8k: set internal delay also for sgmii
-
-QCA original code report port instability and sa that SGMII also require
-to set internal delay. Generalize the rgmii delay function and apply the
-advised value if they are not defined in DT.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 88 +++++++++++++++++++++++++++++++++----------------
- drivers/net/dsa/qca8k.h |  2 ++
- 2 files changed, 62 insertions(+), 28 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1004,6 +1004,7 @@ qca8k_parse_port_config(struct qca8k_pri
- 		case PHY_INTERFACE_MODE_RGMII_ID:
- 		case PHY_INTERFACE_MODE_RGMII_TXID:
- 		case PHY_INTERFACE_MODE_RGMII_RXID:
-+		case PHY_INTERFACE_MODE_SGMII:
- 			delay = 0;
- 
- 			if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay))
-@@ -1036,8 +1037,13 @@ qca8k_parse_port_config(struct qca8k_pri
- 
- 			priv->rgmii_rx_delay[cpu_port_index] = delay;
- 
--			break;
--		case PHY_INTERFACE_MODE_SGMII:
-+			/* Skip sgmii parsing for rgmii* mode */
-+			if (mode == PHY_INTERFACE_MODE_RGMII ||
-+			    mode == PHY_INTERFACE_MODE_RGMII_ID ||
-+			    mode == PHY_INTERFACE_MODE_RGMII_TXID ||
-+			    mode == PHY_INTERFACE_MODE_RGMII_RXID)
-+				break;
-+
- 			if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
- 				priv->sgmii_tx_clk_falling_edge = true;
- 
-@@ -1261,12 +1267,53 @@ qca8k_setup(struct dsa_switch *ds)
- }
- 
- static void
-+qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index,
-+				      u32 reg)
-+{
-+	u32 delay, val = 0;
-+	int ret;
-+
-+	/* Delay can be declared in 3 different way.
-+	 * Mode to rgmii and internal-delay standard binding defined
-+	 * rgmii-id or rgmii-tx/rx phy mode set.
-+	 * The parse logic set a delay different than 0 only when one
-+	 * of the 3 different way is used. In all other case delay is
-+	 * not enabled. With ID or TX/RXID delay is enabled and set
-+	 * to the default and recommended value.
-+	 */
-+	if (priv->rgmii_tx_delay[cpu_port_index]) {
-+		delay = priv->rgmii_tx_delay[cpu_port_index];
-+
-+		val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
-+			QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
-+	}
-+
-+	if (priv->rgmii_rx_delay[cpu_port_index]) {
-+		delay = priv->rgmii_rx_delay[cpu_port_index];
-+
-+		val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
-+			QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
-+	}
-+
-+	/* Set RGMII delay based on the selected values */
-+	ret = qca8k_rmw(priv, reg,
-+			QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK |
-+			QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK |
-+			QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
-+			QCA8K_PORT_PAD_RGMII_RX_DELAY_EN,
-+			val);
-+	if (ret)
-+		dev_err(priv->dev, "Failed to set internal delay for CPU port%d",
-+			cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6);
-+}
-+
-+static void
- qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
- 			 const struct phylink_link_state *state)
- {
- 	struct qca8k_priv *priv = ds->priv;
- 	int cpu_port_index, ret;
--	u32 reg, val, delay;
-+	u32 reg, val;
- 
- 	switch (port) {
- 	case 0: /* 1st CPU port */
-@@ -1315,32 +1362,10 @@ qca8k_phylink_mac_config(struct dsa_swit
- 	case PHY_INTERFACE_MODE_RGMII_ID:
- 	case PHY_INTERFACE_MODE_RGMII_TXID:
- 	case PHY_INTERFACE_MODE_RGMII_RXID:
--		val = QCA8K_PORT_PAD_RGMII_EN;
--
--		/* Delay can be declared in 3 different way.
--		 * Mode to rgmii and internal-delay standard binding defined
--		 * rgmii-id or rgmii-tx/rx phy mode set.
--		 * The parse logic set a delay different than 0 only when one
--		 * of the 3 different way is used. In all other case delay is
--		 * not enabled. With ID or TX/RXID delay is enabled and set
--		 * to the default and recommended value.
--		 */
--		if (priv->rgmii_tx_delay[cpu_port_index]) {
--			delay = priv->rgmii_tx_delay[cpu_port_index];
--
--			val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
--			       QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
--		}
--
--		if (priv->rgmii_rx_delay[cpu_port_index]) {
--			delay = priv->rgmii_rx_delay[cpu_port_index];
--
--			val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
--			       QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
--		}
-+		qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN);
- 
--		/* Set RGMII delay based on the selected values */
--		qca8k_write(priv, reg, val);
-+		/* Configure rgmii delay */
-+		qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
- 
- 		/* QCA8337 requires to set rgmii rx delay for all ports.
- 		 * This is enabled through PORT5_PAD_CTRL for all ports,
-@@ -1411,6 +1436,13 @@ qca8k_phylink_mac_config(struct dsa_swit
- 					QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
- 					QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
- 					val);
-+
-+		/* From original code is reported port instability as SGMII also
-+		 * require delay set. Apply advised values here or take them from DT.
-+		 */
-+		if (state->interface == PHY_INTERFACE_MODE_SGMII)
-+			qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
-+
- 		break;
- 	default:
- 		dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -39,7 +39,9 @@
- #define QCA8K_REG_PORT5_PAD_CTRL			0x008
- #define QCA8K_REG_PORT6_PAD_CTRL			0x00c
- #define   QCA8K_PORT_PAD_RGMII_EN			BIT(26)
-+#define   QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK		GENMASK(23, 22)
- #define   QCA8K_PORT_PAD_RGMII_TX_DELAY(x)		((x) << 22)
-+#define   QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK		GENMASK(21, 20)
- #define   QCA8K_PORT_PAD_RGMII_RX_DELAY(x)		((x) << 20)
- #define	  QCA8K_PORT_PAD_RGMII_TX_DELAY_EN		BIT(25)
- #define   QCA8K_PORT_PAD_RGMII_RX_DELAY_EN		BIT(24)
diff --git a/target/linux/generic/backport-5.10/747-v5.16-14-net-dsa-qca8k-move-port-config-to-dedicated-struct.patch b/target/linux/generic/backport-5.10/747-v5.16-14-net-dsa-qca8k-move-port-config-to-dedicated-struct.patch
deleted file mode 100644
index b991798c87fe..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-14-net-dsa-qca8k-move-port-config-to-dedicated-struct.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From fd0bb28c547f7c8affb1691128cece38f5b626a1 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:19 +0200
-Subject: net: dsa: qca8k: move port config to dedicated struct
-
-Move ports related config to dedicated struct to keep things organized.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 26 +++++++++++++-------------
- drivers/net/dsa/qca8k.h | 10 +++++++---
- 2 files changed, 20 insertions(+), 16 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1019,7 +1019,7 @@ qca8k_parse_port_config(struct qca8k_pri
- 				delay = 3;
- 			}
- 
--			priv->rgmii_tx_delay[cpu_port_index] = delay;
-+			priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay;
- 
- 			delay = 0;
- 
-@@ -1035,7 +1035,7 @@ qca8k_parse_port_config(struct qca8k_pri
- 				delay = 3;
- 			}
- 
--			priv->rgmii_rx_delay[cpu_port_index] = delay;
-+			priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay;
- 
- 			/* Skip sgmii parsing for rgmii* mode */
- 			if (mode == PHY_INTERFACE_MODE_RGMII ||
-@@ -1045,17 +1045,17 @@ qca8k_parse_port_config(struct qca8k_pri
- 				break;
- 
- 			if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
--				priv->sgmii_tx_clk_falling_edge = true;
-+				priv->ports_config.sgmii_tx_clk_falling_edge = true;
- 
- 			if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
--				priv->sgmii_rx_clk_falling_edge = true;
-+				priv->ports_config.sgmii_rx_clk_falling_edge = true;
- 
- 			if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) {
--				priv->sgmii_enable_pll = true;
-+				priv->ports_config.sgmii_enable_pll = true;
- 
- 				if (priv->switch_id == QCA8K_ID_QCA8327) {
- 					dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling");
--					priv->sgmii_enable_pll = false;
-+					priv->ports_config.sgmii_enable_pll = false;
- 				}
- 
- 				if (priv->switch_revision < 2)
-@@ -1281,15 +1281,15 @@ qca8k_mac_config_setup_internal_delay(st
- 	 * not enabled. With ID or TX/RXID delay is enabled and set
- 	 * to the default and recommended value.
- 	 */
--	if (priv->rgmii_tx_delay[cpu_port_index]) {
--		delay = priv->rgmii_tx_delay[cpu_port_index];
-+	if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) {
-+		delay = priv->ports_config.rgmii_tx_delay[cpu_port_index];
- 
- 		val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
- 			QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
- 	}
- 
--	if (priv->rgmii_rx_delay[cpu_port_index]) {
--		delay = priv->rgmii_rx_delay[cpu_port_index];
-+	if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) {
-+		delay = priv->ports_config.rgmii_rx_delay[cpu_port_index];
- 
- 		val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
- 			QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
-@@ -1397,7 +1397,7 @@ qca8k_phylink_mac_config(struct dsa_swit
- 
- 		val |= QCA8K_SGMII_EN_SD;
- 
--		if (priv->sgmii_enable_pll)
-+		if (priv->ports_config.sgmii_enable_pll)
- 			val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
- 			       QCA8K_SGMII_EN_TX;
- 
-@@ -1425,10 +1425,10 @@ qca8k_phylink_mac_config(struct dsa_swit
- 		val = 0;
- 
- 		/* SGMII Clock phase configuration */
--		if (priv->sgmii_rx_clk_falling_edge)
-+		if (priv->ports_config.sgmii_rx_clk_falling_edge)
- 			val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
- 
--		if (priv->sgmii_tx_clk_falling_edge)
-+		if (priv->ports_config.sgmii_tx_clk_falling_edge)
- 			val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
- 
- 		if (val)
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -270,15 +270,19 @@ enum {
- 	QCA8K_CPU_PORT6,
- };
- 
--struct qca8k_priv {
--	u8 switch_id;
--	u8 switch_revision;
-+struct qca8k_ports_config {
- 	bool sgmii_rx_clk_falling_edge;
- 	bool sgmii_tx_clk_falling_edge;
- 	bool sgmii_enable_pll;
- 	u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
- 	u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
-+};
-+
-+struct qca8k_priv {
-+	u8 switch_id;
-+	u8 switch_revision;
- 	bool legacy_phy_port_mapping;
-+	struct qca8k_ports_config ports_config;
- 	struct regmap *regmap;
- 	struct mii_bus *bus;
- 	struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
diff --git a/target/linux/generic/backport-5.10/747-v5.16-15-dt-bindings-net-ipq8064-mdio-fix-warning-with-new-qc.patch b/target/linux/generic/backport-5.10/747-v5.16-15-dt-bindings-net-ipq8064-mdio-fix-warning-with-new-qc.patch
deleted file mode 100644
index f7cb51417633..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-15-dt-bindings-net-ipq8064-mdio-fix-warning-with-new-qc.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From e52073a8e3086046a098b8a7cbeb282ff0cdb424 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:20 +0200
-Subject: dt-bindings: net: ipq8064-mdio: fix warning with new qca8k switch
-
-Fix warning now that we have qca8k switch Documentation using yaml.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
-+++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
-@@ -51,6 +51,9 @@ examples:
-         switch@10 {
-             compatible = "qca,qca8337";
-             reg = <0x10>;
--            /* ... */
-+
-+            ports {
-+              /* ... */
-+            };
-         };
-     };
diff --git a/target/linux/generic/backport-5.10/747-v5.16-16-dt-bindings-net-dsa-qca8k-convert-to-YAML-schema.patch b/target/linux/generic/backport-5.10/747-v5.16-16-dt-bindings-net-dsa-qca8k-convert-to-YAML-schema.patch
deleted file mode 100644
index b9bce97dd3da..000000000000
--- a/target/linux/generic/backport-5.10/747-v5.16-16-dt-bindings-net-dsa-qca8k-convert-to-YAML-schema.patch
+++ /dev/null
@@ -1,631 +0,0 @@
-From d291fbb8245d5ba04979fed85575860a5cea7196 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:21 +0200
-Subject: dt-bindings: net: dsa: qca8k: convert to YAML schema
-
-Convert the qca8k bindings to YAML format.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Co-developed-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../devicetree/bindings/net/dsa/qca8k.txt          | 245 --------------
- .../devicetree/bindings/net/dsa/qca8k.yaml         | 362 +++++++++++++++++++++
- 2 files changed, 362 insertions(+), 245 deletions(-)
- delete mode 100644 Documentation/devicetree/bindings/net/dsa/qca8k.txt
- create mode 100644 Documentation/devicetree/bindings/net/dsa/qca8k.yaml
-
---- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-+++ /dev/null
-@@ -1,245 +0,0 @@
--* Qualcomm Atheros QCA8xxx switch family
--
--Required properties:
--
--- compatible: should be one of:
--    "qca,qca8328": referenced as AR8328(N)-AK1(A/B) QFN 176 pin package
--    "qca,qca8327": referenced as AR8327(N)-AL1A DR-QFN 148 pin package
--    "qca,qca8334": referenced as QCA8334-AL3C QFN 88 pin package
--    "qca,qca8337": referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package
--
--- #size-cells: must be 0
--- #address-cells: must be 1
--
--Optional properties:
--
--- reset-gpios: GPIO to be used to reset the whole device
--- qca,ignore-power-on-sel: Ignore power on pin strapping to configure led open
--                           drain or eeprom presence. This is needed for broken
--                           devices that have wrong configuration or when the oem
--                           decided to not use pin strapping and fallback to sw
--                           regs.
--- qca,led-open-drain: Set leds to open-drain mode. This requires the
--                      qca,ignore-power-on-sel to be set or the driver will fail
--                      to probe. This is needed if the oem doesn't use pin
--                      strapping to set this mode and prefers to set it using sw
--                      regs. The pin strapping related to led open drain mode is
--                      the pin B68 for QCA832x and B49 for QCA833x
--
--Subnodes:
--
--The integrated switch subnode should be specified according to the binding
--described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external
--mdio-bus each subnode describing a port needs to have a valid phandle
--referencing the internal PHY it is connected to. This is because there's no
--N:N mapping of port and PHY id.
--To declare the internal mdio-bus configuration, declare a mdio node in the
--switch node and declare the phandle for the port referencing the internal
--PHY is connected to. In this config a internal mdio-bus is registered and
--the mdio MASTER is used as communication.
--
--Don't use mixed external and internal mdio-bus configurations, as this is
--not supported by the hardware.
--
--This switch support 2 CPU port. Normally and advised configuration is with
--CPU port set to port 0. It is also possible to set the CPU port to port 6
--if the device requires it. The driver will configure the switch to the defined
--port. With both CPU port declared the first CPU port is selected as primary
--and the secondary CPU ignored.
--
--A CPU port node has the following optional node:
--
--- fixed-link            : Fixed-link subnode describing a link to a non-MDIO
--                          managed entity. See
--                          Documentation/devicetree/bindings/net/fixed-link.txt
--                          for details.
--- qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge.
--                                Mostly used in qca8327 with CPU port 0 set to
--                                sgmii.
--- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge.
--- qca,sgmii-enable-pll  : For SGMII CPU port, explicitly enable PLL, TX and RX
--                          chain along with Signal Detection.
--                          This should NOT be enabled for qca8327. If enabled with
--                          qca8327 the sgmii port won't correctly init and an err
--                          is printed.
--                          This can be required for qca8337 switch with revision 2.
--                          A warning is displayed when used with revision greater
--                          2.
--                          With CPU port set to sgmii and qca8337 it is advised
--                          to set this unless a communication problem is observed.
--
--For QCA8K the 'fixed-link' sub-node supports only the following properties:
--
--- 'speed' (integer, mandatory), to indicate the link speed. Accepted
--  values are 10, 100 and 1000
--- 'full-duplex' (boolean, optional), to indicate that full duplex is
--  used. When absent, half duplex is assumed.
--
--Examples:
--
--for the external mdio-bus configuration:
--
--	&mdio0 {
--		phy_port1: phy@0 {
--			reg = <0>;
--		};
--
--		phy_port2: phy@1 {
--			reg = <1>;
--		};
--
--		phy_port3: phy@2 {
--			reg = <2>;
--		};
--
--		phy_port4: phy@3 {
--			reg = <3>;
--		};
--
--		phy_port5: phy@4 {
--			reg = <4>;
--		};
--
--		switch@10 {
--			compatible = "qca,qca8337";
--			#address-cells = <1>;
--			#size-cells = <0>;
--
--			reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
--			reg = <0x10>;
--
--			ports {
--				#address-cells = <1>;
--				#size-cells = <0>;
--				port@0 {
--					reg = <0>;
--					label = "cpu";
--					ethernet = <&gmac1>;
--					phy-mode = "rgmii";
--					fixed-link {
--						speed = 1000;
--						full-duplex;
--					};
--				};
--
--				port@1 {
--					reg = <1>;
--					label = "lan1";
--					phy-handle = <&phy_port1>;
--				};
--
--				port@2 {
--					reg = <2>;
--					label = "lan2";
--					phy-handle = <&phy_port2>;
--				};
--
--				port@3 {
--					reg = <3>;
--					label = "lan3";
--					phy-handle = <&phy_port3>;
--				};
--
--				port@4 {
--					reg = <4>;
--					label = "lan4";
--					phy-handle = <&phy_port4>;
--				};
--
--				port@5 {
--					reg = <5>;
--					label = "wan";
--					phy-handle = <&phy_port5>;
--				};
--			};
--		};
--	};
--
--for the internal master mdio-bus configuration:
--
--	&mdio0 {
--		switch@10 {
--			compatible = "qca,qca8337";
--			#address-cells = <1>;
--			#size-cells = <0>;
--
--			reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
--			reg = <0x10>;
--
--			ports {
--				#address-cells = <1>;
--				#size-cells = <0>;
--
--				port@0 {
--					reg = <0>;
--					label = "cpu";
--					ethernet = <&gmac1>;
--					phy-mode = "rgmii";
--					fixed-link {
--						speed = 1000;
--						full-duplex;
--					};
--				};
--
--				port@1 {
--					reg = <1>;
--					label = "lan1";
--					phy-mode = "internal";
--					phy-handle = <&phy_port1>;
--				};
--
--				port@2 {
--					reg = <2>;
--					label = "lan2";
--					phy-mode = "internal";
--					phy-handle = <&phy_port2>;
--				};
--
--				port@3 {
--					reg = <3>;
--					label = "lan3";
--					phy-mode = "internal";
--					phy-handle = <&phy_port3>;
--				};
--
--				port@4 {
--					reg = <4>;
--					label = "lan4";
--					phy-mode = "internal";
--					phy-handle = <&phy_port4>;
--				};
--
--				port@5 {
--					reg = <5>;
--					label = "wan";
--					phy-mode = "internal";
--					phy-handle = <&phy_port5>;
--				};
--			};
--
--			mdio {
--				#address-cells = <1>;
--				#size-cells = <0>;
--
--				phy_port1: phy@0 {
--					reg = <0>;
--				};
--
--				phy_port2: phy@1 {
--					reg = <1>;
--				};
--
--				phy_port3: phy@2 {
--					reg = <2>;
--				};
--
--				phy_port4: phy@3 {
--					reg = <3>;
--				};
--
--				phy_port5: phy@4 {
--					reg = <4>;
--				};
--			};
--		};
--	};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
-@@ -0,0 +1,362 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/dsa/qca8k.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Qualcomm Atheros QCA83xx switch family
-+
-+maintainers:
-+  - John Crispin <john@phrozen.org>
-+
-+description:
-+  If the QCA8K switch is connect to an SoC's external mdio-bus, each subnode
-+  describing a port needs to have a valid phandle referencing the internal PHY
-+  it is connected to. This is because there is no N:N mapping of port and PHY
-+  ID. To declare the internal mdio-bus configuration, declare an MDIO node in
-+  the switch node and declare the phandle for the port, referencing the internal
-+  PHY it is connected to. In this config, an internal mdio-bus is registered and
-+  the MDIO master is used for communication. Mixed external and internal
-+  mdio-bus configurations are not supported by the hardware.
-+
-+properties:
-+  compatible:
-+    oneOf:
-+      - enum:
-+          - qca,qca8327
-+          - qca,qca8328
-+          - qca,qca8334
-+          - qca,qca8337
-+    description: |
-+      qca,qca8328: referenced as AR8328(N)-AK1(A/B) QFN 176 pin package
-+      qca,qca8327: referenced as AR8327(N)-AL1A DR-QFN 148 pin package
-+      qca,qca8334: referenced as QCA8334-AL3C QFN 88 pin package
-+      qca,qca8337: referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package
-+
-+  reg:
-+    maxItems: 1
-+
-+  reset-gpios:
-+    description:
-+      GPIO to be used to reset the whole device
-+    maxItems: 1
-+
-+  qca,ignore-power-on-sel:
-+    $ref: /schemas/types.yaml#/definitions/flag
-+    description:
-+      Ignore power-on pin strapping to configure LED open-drain or EEPROM
-+      presence. This is needed for devices with incorrect configuration or when
-+      the OEM has decided not to use pin strapping and falls back to SW regs.
-+
-+  qca,led-open-drain:
-+    $ref: /schemas/types.yaml#/definitions/flag
-+    description:
-+      Set LEDs to open-drain mode. This requires the qca,ignore-power-on-sel to
-+      be set, otherwise the driver will fail at probe. This is required if the
-+      OEM does not use pin strapping to set this mode and prefers to set it
-+      using SW regs. The pin strappings related to LED open-drain mode are
-+      B68 on the QCA832x and B49 on the QCA833x.
-+
-+  mdio:
-+    type: object
-+    description: Qca8k switch have an internal mdio to access switch port.
-+                 If this is not present, the legacy mapping is used and the
-+                 internal mdio access is used.
-+                 With the legacy mapping the reg corresponding to the internal
-+                 mdio is the switch reg with an offset of -1.
-+
-+    properties:
-+      '#address-cells':
-+        const: 1
-+      '#size-cells':
-+        const: 0
-+
-+    patternProperties:
-+      "^(ethernet-)?phy@[0-4]$":
-+        type: object
-+
-+        allOf:
-+          - $ref: "http://devicetree.org/schemas/net/mdio.yaml#"
-+
-+        properties:
-+          reg:
-+            maxItems: 1
-+
-+        required:
-+          - reg
-+
-+patternProperties:
-+  "^(ethernet-)?ports$":
-+    type: object
-+    properties:
-+      '#address-cells':
-+        const: 1
-+      '#size-cells':
-+        const: 0
-+
-+    patternProperties:
-+      "^(ethernet-)?port@[0-6]$":
-+        type: object
-+        description: Ethernet switch ports
-+
-+        properties:
-+          reg:
-+            description: Port number
-+
-+          label:
-+            description:
-+              Describes the label associated with this port, which will become
-+              the netdev name
-+            $ref: /schemas/types.yaml#/definitions/string
-+
-+          link:
-+            description:
-+              Should be a list of phandles to other switch's DSA port. This
-+              port is used as the outgoing port towards the phandle ports. The
-+              full routing information must be given, not just the one hop
-+              routes to neighbouring switches
-+            $ref: /schemas/types.yaml#/definitions/phandle-array
-+
-+          ethernet:
-+            description:
-+              Should be a phandle to a valid Ethernet device node.  This host
-+              device is what the switch port is connected to
-+            $ref: /schemas/types.yaml#/definitions/phandle
-+
-+          phy-handle: true
-+
-+          phy-mode: true
-+
-+          fixed-link: true
-+
-+          mac-address: true
-+
-+          sfp: true
-+
-+          qca,sgmii-rxclk-falling-edge:
-+            $ref: /schemas/types.yaml#/definitions/flag
-+            description:
-+              Set the receive clock phase to falling edge. Mostly commonly used on
-+              the QCA8327 with CPU port 0 set to SGMII.
-+
-+          qca,sgmii-txclk-falling-edge:
-+            $ref: /schemas/types.yaml#/definitions/flag
-+            description:
-+              Set the transmit clock phase to falling edge.
-+
-+          qca,sgmii-enable-pll:
-+            $ref: /schemas/types.yaml#/definitions/flag
-+            description:
-+              For SGMII CPU port, explicitly enable PLL, TX and RX chain along with
-+              Signal Detection. On the QCA8327 this should not be enabled, otherwise
-+              the SGMII port will not initialize. When used on the QCA8337, revision 3
-+              or greater, a warning will be displayed. When the CPU port is set to
-+              SGMII on the QCA8337, it is advised to set this unless a communication
-+              issue is observed.
-+
-+        required:
-+          - reg
-+
-+        additionalProperties: false
-+
-+oneOf:
-+  - required:
-+      - ports
-+  - required:
-+      - ethernet-ports
-+
-+required:
-+  - compatible
-+  - reg
-+
-+additionalProperties: true
-+
-+examples:
-+  - |
-+    #include <dt-bindings/gpio/gpio.h>
-+
-+    mdio {
-+        #address-cells = <1>;
-+        #size-cells = <0>;
-+
-+        external_phy_port1: ethernet-phy@0 {
-+            reg = <0>;
-+        };
-+
-+        external_phy_port2: ethernet-phy@1 {
-+            reg = <1>;
-+        };
-+
-+        external_phy_port3: ethernet-phy@2 {
-+            reg = <2>;
-+        };
-+
-+        external_phy_port4: ethernet-phy@3 {
-+            reg = <3>;
-+        };
-+
-+        external_phy_port5: ethernet-phy@4 {
-+            reg = <4>;
-+        };
-+
-+        switch@10 {
-+            compatible = "qca,qca8337";
-+            #address-cells = <1>;
-+            #size-cells = <0>;
-+            reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-+            reg = <0x10>;
-+
-+            ports {
-+                #address-cells = <1>;
-+                #size-cells = <0>;
-+
-+                port@0 {
-+                    reg = <0>;
-+                    label = "cpu";
-+                    ethernet = <&gmac1>;
-+                    phy-mode = "rgmii";
-+
-+                    fixed-link {
-+                        speed = <1000>;
-+                        full-duplex;
-+                    };
-+                };
-+
-+                port@1 {
-+                    reg = <1>;
-+                    label = "lan1";
-+                    phy-handle = <&external_phy_port1>;
-+                };
-+
-+                port@2 {
-+                    reg = <2>;
-+                    label = "lan2";
-+                    phy-handle = <&external_phy_port2>;
-+                };
-+
-+                port@3 {
-+                    reg = <3>;
-+                    label = "lan3";
-+                    phy-handle = <&external_phy_port3>;
-+                };
-+
-+                port@4 {
-+                    reg = <4>;
-+                    label = "lan4";
-+                    phy-handle = <&external_phy_port4>;
-+                };
-+
-+                port@5 {
-+                    reg = <5>;
-+                    label = "wan";
-+                    phy-handle = <&external_phy_port5>;
-+                };
-+            };
-+        };
-+    };
-+  - |
-+    #include <dt-bindings/gpio/gpio.h>
-+
-+    mdio {
-+        #address-cells = <1>;
-+        #size-cells = <0>;
-+
-+        switch@10 {
-+            compatible = "qca,qca8337";
-+            #address-cells = <1>;
-+            #size-cells = <0>;
-+            reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-+            reg = <0x10>;
-+
-+            ports {
-+                #address-cells = <1>;
-+                #size-cells = <0>;
-+
-+                port@0 {
-+                    reg = <0>;
-+                    label = "cpu";
-+                    ethernet = <&gmac1>;
-+                    phy-mode = "rgmii";
-+
-+                    fixed-link {
-+                        speed = <1000>;
-+                        full-duplex;
-+                    };
-+                };
-+
-+                port@1 {
-+                    reg = <1>;
-+                    label = "lan1";
-+                    phy-mode = "internal";
-+                    phy-handle = <&internal_phy_port1>;
-+                };
-+
-+                port@2 {
-+                    reg = <2>;
-+                    label = "lan2";
-+                    phy-mode = "internal";
-+                    phy-handle = <&internal_phy_port2>;
-+                };
-+
-+                port@3 {
-+                    reg = <3>;
-+                    label = "lan3";
-+                    phy-mode = "internal";
-+                    phy-handle = <&internal_phy_port3>;
-+                };
-+
-+                port@4 {
-+                    reg = <4>;
-+                    label = "lan4";
-+                    phy-mode = "internal";
-+                    phy-handle = <&internal_phy_port4>;
-+                };
-+
-+                port@5 {
-+                    reg = <5>;
-+                    label = "wan";
-+                    phy-mode = "internal";
-+                    phy-handle = <&internal_phy_port5>;
-+                };
-+
-+                port@6 {
-+                    reg = <0>;
-+                    label = "cpu";
-+                    ethernet = <&gmac1>;
-+                    phy-mode = "sgmii";
-+
-+                    qca,sgmii-rxclk-falling-edge;
-+
-+                    fixed-link {
-+                        speed = <1000>;
-+                        full-duplex;
-+                    };
-+                };
-+            };
-+
-+            mdio {
-+                #address-cells = <1>;
-+                #size-cells = <0>;
-+
-+                internal_phy_port1: ethernet-phy@0 {
-+                    reg = <0>;
-+                };
-+
-+                internal_phy_port2: ethernet-phy@1 {
-+                    reg = <1>;
-+                };
-+
-+                internal_phy_port3: ethernet-phy@2 {
-+                    reg = <2>;
-+                };
-+
-+                internal_phy_port4: ethernet-phy@3 {
-+                    reg = <3>;
-+                };
-+
-+                internal_phy_port5: ethernet-phy@4 {
-+                    reg = <4>;
-+                };
-+            };
-+        };
-+    };
diff --git a/target/linux/generic/backport-5.10/748-v5.16-net-dsa-qca8k-fix-delay-applied-to-wrong-cpu-in-parse-p.patch b/target/linux/generic/backport-5.10/748-v5.16-net-dsa-qca8k-fix-delay-applied-to-wrong-cpu-in-parse-p.patch
deleted file mode 100644
index a510cfdc1831..000000000000
--- a/target/linux/generic/backport-5.10/748-v5.16-net-dsa-qca8k-fix-delay-applied-to-wrong-cpu-in-parse-p.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 06dd34a628ae5b6a839b757e746de165d6789ca8 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 17 Oct 2021 16:56:46 +0200
-Subject: net: dsa: qca8k: fix delay applied to wrong cpu in parse_port_config
-
-Fix delay settings applied to wrong cpu in parse_port_config. The delay
-values is set to the wrong index as the cpu_port_index is incremented
-too early. Start the cpu_port_index to -1 so the correct value is
-applied to address also the case with invalid phy mode and not available
-port.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -976,7 +976,7 @@ qca8k_setup_of_pws_reg(struct qca8k_priv
- static int
- qca8k_parse_port_config(struct qca8k_priv *priv)
- {
--	int port, cpu_port_index = 0, ret;
-+	int port, cpu_port_index = -1, ret;
- 	struct device_node *port_dn;
- 	phy_interface_t mode;
- 	struct dsa_port *dp;
diff --git a/target/linux/generic/backport-5.10/749-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch b/target/linux/generic/backport-5.10/749-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch
deleted file mode 100644
index 71fa3022d558..000000000000
--- a/target/linux/generic/backport-5.10/749-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch
+++ /dev/null
@@ -1,151 +0,0 @@
-From 040e926f5813a5f4cc18dbff7c942d1e52f368f2 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Tue, 19 Oct 2021 02:08:50 +0200
-Subject: net: dsa: qca8k: tidy for loop in setup and add cpu port check
-
-Tidy and organize qca8k setup function from multiple for loop.
-Change for loop in bridge leave/join to scan all port and skip cpu port.
-No functional change intended.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 74 +++++++++++++++++++++++++++++--------------------
- 1 file changed, 44 insertions(+), 30 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1122,28 +1122,34 @@ qca8k_setup(struct dsa_switch *ds)
- 	if (ret)
- 		dev_warn(priv->dev, "mib init failed");
- 
--	/* Enable QCA header mode on the cpu port */
--	ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port),
--			  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
--			  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
--	if (ret) {
--		dev_err(priv->dev, "failed enabling QCA header mode");
--		return ret;
--	}
--
--	/* Disable forwarding by default on all ports */
-+	/* Initial setup of all ports */
- 	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
-+		/* Disable forwarding by default on all ports */
- 		ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
- 				QCA8K_PORT_LOOKUP_MEMBER, 0);
- 		if (ret)
- 			return ret;
--	}
- 
--	/* Disable MAC by default on all ports */
--	for (i = 1; i < QCA8K_NUM_PORTS; i++)
--		qca8k_port_set_status(priv, i, 0);
-+		/* Enable QCA header mode on all cpu ports */
-+		if (dsa_is_cpu_port(ds, i)) {
-+			ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
-+					  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
-+					  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
-+			if (ret) {
-+				dev_err(priv->dev, "failed enabling QCA header mode");
-+				return ret;
-+			}
-+		}
-+
-+		/* Disable MAC by default on all user ports */
-+		if (dsa_is_user_port(ds, i))
-+			qca8k_port_set_status(priv, i, 0);
-+	}
- 
--	/* Forward all unknown frames to CPU port for Linux processing */
-+	/* Forward all unknown frames to CPU port for Linux processing
-+	 * Notice that in multi-cpu config only one port should be set
-+	 * for igmp, unknown, multicast and broadcast packet
-+	 */
- 	ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
- 			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
- 			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
-@@ -1152,11 +1158,13 @@ qca8k_setup(struct dsa_switch *ds)
- 	if (ret)
- 		return ret;
- 
--	/* Setup connection between CPU port & user ports */
-+	/* Setup connection between CPU port & user ports
-+	 * Configure specific switch configuration for ports
-+	 */
- 	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
- 		/* CPU port gets connected to all user ports of the switch */
- 		if (dsa_is_cpu_port(ds, i)) {
--			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port),
-+			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
- 					QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
- 			if (ret)
- 				return ret;
-@@ -1193,16 +1201,14 @@ qca8k_setup(struct dsa_switch *ds)
- 			if (ret)
- 				return ret;
- 		}
--	}
- 
--	/* The port 5 of the qca8337 have some problem in flood condition. The
--	 * original legacy driver had some specific buffer and priority settings
--	 * for the different port suggested by the QCA switch team. Add this
--	 * missing settings to improve switch stability under load condition.
--	 * This problem is limited to qca8337 and other qca8k switch are not affected.
--	 */
--	if (priv->switch_id == QCA8K_ID_QCA8337) {
--		for (i = 0; i < QCA8K_NUM_PORTS; i++) {
-+		/* The port 5 of the qca8337 have some problem in flood condition. The
-+		 * original legacy driver had some specific buffer and priority settings
-+		 * for the different port suggested by the QCA switch team. Add this
-+		 * missing settings to improve switch stability under load condition.
-+		 * This problem is limited to qca8337 and other qca8k switch are not affected.
-+		 */
-+		if (priv->switch_id == QCA8K_ID_QCA8337) {
- 			switch (i) {
- 			/* The 2 CPU port and port 5 requires some different
- 			 * priority than any other ports.
-@@ -1238,6 +1244,12 @@ qca8k_setup(struct dsa_switch *ds)
- 				  QCA8K_PORT_HOL_CTRL1_WRED_EN,
- 				  mask);
- 		}
-+
-+		/* Set initial MTU for every port.
-+		 * We have only have a general MTU setting. So track
-+		 * every port and set the max across all port.
-+		 */
-+		priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
- 	}
- 
- 	/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
-@@ -1251,8 +1263,6 @@ qca8k_setup(struct dsa_switch *ds)
- 	}
- 
- 	/* Setup our port MTUs to match power on defaults */
--	for (i = 0; i < QCA8K_NUM_PORTS; i++)
--		priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
- 	ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
- 	if (ret)
- 		dev_warn(priv->dev, "failed setting MTU settings");
-@@ -1728,7 +1738,9 @@ qca8k_port_bridge_join(struct dsa_switch
- 	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
- 	port_mask = BIT(cpu_port);
- 
--	for (i = 1; i < QCA8K_NUM_PORTS; i++) {
-+	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
-+		if (dsa_is_cpu_port(ds, i))
-+			continue;
- 		if (dsa_to_port(ds, i)->bridge_dev != br)
- 			continue;
- 		/* Add this port to the portvlan mask of the other ports
-@@ -1758,7 +1770,9 @@ qca8k_port_bridge_leave(struct dsa_switc
- 
- 	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
- 
--	for (i = 1; i < QCA8K_NUM_PORTS; i++) {
-+	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
-+		if (dsa_is_cpu_port(ds, i))
-+			continue;
- 		if (dsa_to_port(ds, i)->bridge_dev != br)
- 			continue;
- 		/* Remove this port to the portvlan mask of the other ports
diff --git a/target/linux/generic/backport-5.10/750-v5.16-net-dsa-qca8k-make-sure-pad0-mac06-exchange-is-disabled.patch b/target/linux/generic/backport-5.10/750-v5.16-net-dsa-qca8k-make-sure-pad0-mac06-exchange-is-disabled.patch
deleted file mode 100644
index 4a61703c5274..000000000000
--- a/target/linux/generic/backport-5.10/750-v5.16-net-dsa-qca8k-make-sure-pad0-mac06-exchange-is-disabled.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 5f15d392dcb4aa250a63d6f2c5adfc26c0aedc78 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Tue, 2 Nov 2021 19:30:41 +0100
-Subject: net: dsa: qca8k: make sure PAD0 MAC06 exchange is disabled
-
-Some device set MAC06 exchange in the bootloader. This cause some
-problem as we don't support this strange mode and we just set the port6
-as the primary CPU port. With MAC06 exchange, PAD0 reg configure port6
-instead of port0. Add an extra check and explicitly disable MAC06 exchange
-to correctly configure the port PAD config.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Fixes: 3fcf734aa482 ("net: dsa: qca8k: add support for cpu port 6")
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 8 ++++++++
- drivers/net/dsa/qca8k.h | 1 +
- 2 files changed, 9 insertions(+)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1109,6 +1109,14 @@ qca8k_setup(struct dsa_switch *ds)
- 	if (ret)
- 		return ret;
- 
-+	/* Make sure MAC06 is disabled */
-+	ret = qca8k_reg_clear(priv, QCA8K_REG_PORT0_PAD_CTRL,
-+			      QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN);
-+	if (ret) {
-+		dev_err(priv->dev, "failed disabling MAC06 exchange");
-+		return ret;
-+	}
-+
- 	/* Enable CPU Port */
- 	ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
- 			    QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -34,6 +34,7 @@
- #define   QCA8K_MASK_CTRL_DEVICE_ID_MASK		GENMASK(15, 8)
- #define   QCA8K_MASK_CTRL_DEVICE_ID(x)			((x) >> 8)
- #define QCA8K_REG_PORT0_PAD_CTRL			0x004
-+#define   QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN		BIT(31)
- #define   QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE	BIT(19)
- #define   QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE	BIT(18)
- #define QCA8K_REG_PORT5_PAD_CTRL			0x008
diff --git a/target/linux/generic/backport-5.10/751-v5.16-net-dsa-qca8k-fix-internal-delay-applied-to-the-wrong-PAD.patch b/target/linux/generic/backport-5.10/751-v5.16-net-dsa-qca8k-fix-internal-delay-applied-to-the-wrong-PAD.patch
deleted file mode 100644
index df9518d86cd3..000000000000
--- a/target/linux/generic/backport-5.10/751-v5.16-net-dsa-qca8k-fix-internal-delay-applied-to-the-wrong-PAD.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 3b00a07c2443745d62babfe08dbb2ad8e649526e Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 19 Nov 2021 03:03:49 +0100
-Subject: [PATCH] net: dsa: qca8k: fix internal delay applied to the wrong PAD
- config
-
-With SGMII phy the internal delay is always applied to the PAD0 config.
-This is caused by the falling edge configuration that hardcode the reg
-to PAD0 (as the falling edge bits are present only in PAD0 reg)
-Move the delay configuration before the reg overwrite to correctly apply
-the delay.
-
-Fixes: cef08115846e ("net: dsa: qca8k: set internal delay also for sgmii")
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1433,6 +1433,12 @@ qca8k_phylink_mac_config(struct dsa_swit
- 
- 		qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
- 
-+		/* From original code is reported port instability as SGMII also
-+		 * require delay set. Apply advised values here or take them from DT.
-+		 */
-+		if (state->interface == PHY_INTERFACE_MODE_SGMII)
-+			qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
-+
- 		/* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
- 		 * falling edge is set writing in the PORT0 PAD reg
- 		 */
-@@ -1455,12 +1461,6 @@ qca8k_phylink_mac_config(struct dsa_swit
- 					QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
- 					val);
- 
--		/* From original code is reported port instability as SGMII also
--		 * require delay set. Apply advised values here or take them from DT.
--		 */
--		if (state->interface == PHY_INTERFACE_MODE_SGMII)
--			qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
--
- 		break;
- 	default:
- 		dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
diff --git a/target/linux/generic/backport-5.10/752-v5.16-net-dsa-qca8k-fix-MTU-calculation.patch b/target/linux/generic/backport-5.10/752-v5.16-net-dsa-qca8k-fix-MTU-calculation.patch
deleted file mode 100644
index 7348d93ec44b..000000000000
--- a/target/linux/generic/backport-5.10/752-v5.16-net-dsa-qca8k-fix-MTU-calculation.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 65258b9d8cde45689bdc86ca39b50f01f983733b Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko@sartura.hr>
-Date: Fri, 19 Nov 2021 03:03:50 +0100
-Subject: [PATCH] net: dsa: qca8k: fix MTU calculation
-
-qca8k has a global MTU, so its tracking the MTU per port to make sure
-that the largest MTU gets applied.
-Since it uses the frame size instead of MTU the driver MTU change function
-will then add the size of Ethernet header and checksum on top of MTU.
-
-The driver currently populates the per port MTU size as Ethernet frame
-length + checksum which equals 1518.
-
-The issue is that then MTU change function will go through all of the
-ports, find the largest MTU and apply the Ethernet header + checksum on
-top of it again, so for a desired MTU of 1500 you will end up with 1536.
-
-This is obviously incorrect, so to correct it populate the per port struct
-MTU with just the MTU and not include the Ethernet header + checksum size
-as those will be added by the MTU change function.
-
-Fixes: f58d2598cf70 ("net: dsa: qca8k: implement the port MTU callbacks")
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1256,8 +1256,12 @@ qca8k_setup(struct dsa_switch *ds)
- 		/* Set initial MTU for every port.
- 		 * We have only have a general MTU setting. So track
- 		 * every port and set the max across all port.
-+		 * Set per port MTU to 1500 as the MTU change function
-+		 * will add the overhead and if its set to 1518 then it
-+		 * will apply the overhead again and we will end up with
-+		 * MTU of 1536 instead of 1518
- 		 */
--		priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
-+		priv->port_mtu[i] = ETH_DATA_LEN;
- 	}
- 
- 	/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
diff --git a/target/linux/generic/backport-5.10/753-net-next-net-dsa-qca8k-remove-redundant-check-in-parse_port_config.patch b/target/linux/generic/backport-5.10/753-net-next-net-dsa-qca8k-remove-redundant-check-in-parse_port_config.patch
deleted file mode 100644
index f477b1b92985..000000000000
--- a/target/linux/generic/backport-5.10/753-net-next-net-dsa-qca8k-remove-redundant-check-in-parse_port_config.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From b9133f3ef5a2659730cf47a74bd0a9259f1cf8ff Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 22 Nov 2021 16:23:40 +0100
-Subject: net: dsa: qca8k: remove redundant check in parse_port_config
-
-The very next check for port 0 and 6 already makes sure we don't go out
-of bounds with the ports_config delay table.
-Remove the redundant check.
-
-Reported-by: kernel test robot <lkp@intel.com>
-Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -983,7 +983,7 @@ qca8k_parse_port_config(struct qca8k_pri
- 	u32 delay;
- 
- 	/* We have 2 CPU port. Check them */
--	for (port = 0; port < QCA8K_NUM_PORTS && cpu_port_index < QCA8K_NUM_CPU_PORTS; port++) {
-+	for (port = 0; port < QCA8K_NUM_PORTS; port++) {
- 		/* Skip every other port */
- 		if (port != 0 && port != 6)
- 			continue;
diff --git a/target/linux/generic/backport-5.10/754-net-next-net-dsa-qca8k-convert-to-GENMASK_FIELD_PREP_FIELD_GET.patch b/target/linux/generic/backport-5.10/754-net-next-net-dsa-qca8k-convert-to-GENMASK_FIELD_PREP_FIELD_GET.patch
deleted file mode 100644
index c1489fd9a8fc..000000000000
--- a/target/linux/generic/backport-5.10/754-net-next-net-dsa-qca8k-convert-to-GENMASK_FIELD_PREP_FIELD_GET.patch
+++ /dev/null
@@ -1,508 +0,0 @@
-From 90ae68bfc2ffcb54a4ba4f64edbeb84a80cbb57c Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 22 Nov 2021 16:23:41 +0100
-Subject: net: dsa: qca8k: convert to GENMASK/FIELD_PREP/FIELD_GET
-
-Convert and try to standardize bit fields using
-GENMASK/FIELD_PREP/FIELD_GET macros. Rework some logic to support the
-standard macro and tidy things up. No functional change intended.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c |  98 +++++++++++++++----------------
- drivers/net/dsa/qca8k.h | 153 ++++++++++++++++++++++++++----------------------
- 2 files changed, 130 insertions(+), 121 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -9,6 +9,7 @@
- #include <linux/module.h>
- #include <linux/phy.h>
- #include <linux/netdevice.h>
-+#include <linux/bitfield.h>
- #include <net/dsa.h>
- #include <linux/of_net.h>
- #include <linux/of_mdio.h>
-@@ -319,18 +320,18 @@ qca8k_fdb_read(struct qca8k_priv *priv,
- 	}
- 
- 	/* vid - 83:72 */
--	fdb->vid = (reg[2] >> QCA8K_ATU_VID_S) & QCA8K_ATU_VID_M;
-+	fdb->vid = FIELD_GET(QCA8K_ATU_VID_MASK, reg[2]);
- 	/* aging - 67:64 */
--	fdb->aging = reg[2] & QCA8K_ATU_STATUS_M;
-+	fdb->aging = FIELD_GET(QCA8K_ATU_STATUS_MASK, reg[2]);
- 	/* portmask - 54:48 */
--	fdb->port_mask = (reg[1] >> QCA8K_ATU_PORT_S) & QCA8K_ATU_PORT_M;
-+	fdb->port_mask = FIELD_GET(QCA8K_ATU_PORT_MASK, reg[1]);
- 	/* mac - 47:0 */
--	fdb->mac[0] = (reg[1] >> QCA8K_ATU_ADDR0_S) & 0xff;
--	fdb->mac[1] = reg[1] & 0xff;
--	fdb->mac[2] = (reg[0] >> QCA8K_ATU_ADDR2_S) & 0xff;
--	fdb->mac[3] = (reg[0] >> QCA8K_ATU_ADDR3_S) & 0xff;
--	fdb->mac[4] = (reg[0] >> QCA8K_ATU_ADDR4_S) & 0xff;
--	fdb->mac[5] = reg[0] & 0xff;
-+	fdb->mac[0] = FIELD_GET(QCA8K_ATU_ADDR0_MASK, reg[1]);
-+	fdb->mac[1] = FIELD_GET(QCA8K_ATU_ADDR1_MASK, reg[1]);
-+	fdb->mac[2] = FIELD_GET(QCA8K_ATU_ADDR2_MASK, reg[0]);
-+	fdb->mac[3] = FIELD_GET(QCA8K_ATU_ADDR3_MASK, reg[0]);
-+	fdb->mac[4] = FIELD_GET(QCA8K_ATU_ADDR4_MASK, reg[0]);
-+	fdb->mac[5] = FIELD_GET(QCA8K_ATU_ADDR5_MASK, reg[0]);
- 
- 	return 0;
- }
-@@ -343,18 +344,18 @@ qca8k_fdb_write(struct qca8k_priv *priv,
- 	int i;
- 
- 	/* vid - 83:72 */
--	reg[2] = (vid & QCA8K_ATU_VID_M) << QCA8K_ATU_VID_S;
-+	reg[2] = FIELD_PREP(QCA8K_ATU_VID_MASK, vid);
- 	/* aging - 67:64 */
--	reg[2] |= aging & QCA8K_ATU_STATUS_M;
-+	reg[2] |= FIELD_PREP(QCA8K_ATU_STATUS_MASK, aging);
- 	/* portmask - 54:48 */
--	reg[1] = (port_mask & QCA8K_ATU_PORT_M) << QCA8K_ATU_PORT_S;
-+	reg[1] = FIELD_PREP(QCA8K_ATU_PORT_MASK, port_mask);
- 	/* mac - 47:0 */
--	reg[1] |= mac[0] << QCA8K_ATU_ADDR0_S;
--	reg[1] |= mac[1];
--	reg[0] |= mac[2] << QCA8K_ATU_ADDR2_S;
--	reg[0] |= mac[3] << QCA8K_ATU_ADDR3_S;
--	reg[0] |= mac[4] << QCA8K_ATU_ADDR4_S;
--	reg[0] |= mac[5];
-+	reg[1] |= FIELD_PREP(QCA8K_ATU_ADDR0_MASK, mac[0]);
-+	reg[1] |= FIELD_PREP(QCA8K_ATU_ADDR1_MASK, mac[1]);
-+	reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR2_MASK, mac[2]);
-+	reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR3_MASK, mac[3]);
-+	reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR4_MASK, mac[4]);
-+	reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR5_MASK, mac[5]);
- 
- 	/* load the array into the ARL table */
- 	for (i = 0; i < 3; i++)
-@@ -372,7 +373,7 @@ qca8k_fdb_access(struct qca8k_priv *priv
- 	reg |= cmd;
- 	if (port >= 0) {
- 		reg |= QCA8K_ATU_FUNC_PORT_EN;
--		reg |= (port & QCA8K_ATU_FUNC_PORT_M) << QCA8K_ATU_FUNC_PORT_S;
-+		reg |= FIELD_PREP(QCA8K_ATU_FUNC_PORT_MASK, port);
- 	}
- 
- 	/* Write the function register triggering the table access */
-@@ -454,7 +455,7 @@ qca8k_vlan_access(struct qca8k_priv *pri
- 	/* Set the command and VLAN index */
- 	reg = QCA8K_VTU_FUNC1_BUSY;
- 	reg |= cmd;
--	reg |= vid << QCA8K_VTU_FUNC1_VID_S;
-+	reg |= FIELD_PREP(QCA8K_VTU_FUNC1_VID_MASK, vid);
- 
- 	/* Write the function register triggering the table access */
- 	ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg);
-@@ -500,13 +501,11 @@ qca8k_vlan_add(struct qca8k_priv *priv,
- 	if (ret < 0)
- 		goto out;
- 	reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN;
--	reg &= ~(QCA8K_VTU_FUNC0_EG_MODE_MASK << QCA8K_VTU_FUNC0_EG_MODE_S(port));
-+	reg &= ~QCA8K_VTU_FUNC0_EG_MODE_PORT_MASK(port);
- 	if (untagged)
--		reg |= QCA8K_VTU_FUNC0_EG_MODE_UNTAG <<
--				QCA8K_VTU_FUNC0_EG_MODE_S(port);
-+		reg |= QCA8K_VTU_FUNC0_EG_MODE_PORT_UNTAG(port);
- 	else
--		reg |= QCA8K_VTU_FUNC0_EG_MODE_TAG <<
--				QCA8K_VTU_FUNC0_EG_MODE_S(port);
-+		reg |= QCA8K_VTU_FUNC0_EG_MODE_PORT_TAG(port);
- 
- 	ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
- 	if (ret)
-@@ -534,15 +533,13 @@ qca8k_vlan_del(struct qca8k_priv *priv,
- 	ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, &reg);
- 	if (ret < 0)
- 		goto out;
--	reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port));
--	reg |= QCA8K_VTU_FUNC0_EG_MODE_NOT <<
--			QCA8K_VTU_FUNC0_EG_MODE_S(port);
-+	reg &= ~QCA8K_VTU_FUNC0_EG_MODE_PORT_MASK(port);
-+	reg |= QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(port);
- 
- 	/* Check if we're the last member to be removed */
- 	del = true;
- 	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
--		mask = QCA8K_VTU_FUNC0_EG_MODE_NOT;
--		mask <<= QCA8K_VTU_FUNC0_EG_MODE_S(i);
-+		mask = QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(i);
- 
- 		if ((reg & mask) != mask) {
- 			del = false;
-@@ -1014,7 +1011,7 @@ qca8k_parse_port_config(struct qca8k_pri
- 				 mode == PHY_INTERFACE_MODE_RGMII_TXID)
- 				delay = 1;
- 
--			if (delay > QCA8K_MAX_DELAY) {
-+			if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK, delay)) {
- 				dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
- 				delay = 3;
- 			}
-@@ -1030,7 +1027,7 @@ qca8k_parse_port_config(struct qca8k_pri
- 				 mode == PHY_INTERFACE_MODE_RGMII_RXID)
- 				delay = 2;
- 
--			if (delay > QCA8K_MAX_DELAY) {
-+			if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK, delay)) {
- 				dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
- 				delay = 3;
- 			}
-@@ -1141,8 +1138,8 @@ qca8k_setup(struct dsa_switch *ds)
- 		/* Enable QCA header mode on all cpu ports */
- 		if (dsa_is_cpu_port(ds, i)) {
- 			ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
--					  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
--					  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
-+					  FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) |
-+					  FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL));
- 			if (ret) {
- 				dev_err(priv->dev, "failed enabling QCA header mode");
- 				return ret;
-@@ -1159,10 +1156,10 @@ qca8k_setup(struct dsa_switch *ds)
- 	 * for igmp, unknown, multicast and broadcast packet
- 	 */
- 	ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
--			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
--			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
--			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
--			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
-+			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) |
-+			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) |
-+			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) |
-+			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port)));
- 	if (ret)
- 		return ret;
- 
-@@ -1180,8 +1177,6 @@ qca8k_setup(struct dsa_switch *ds)
- 
- 		/* Individual user ports get connected to CPU port only */
- 		if (dsa_is_user_port(ds, i)) {
--			int shift = 16 * (i % 2);
--
- 			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
- 					QCA8K_PORT_LOOKUP_MEMBER,
- 					BIT(cpu_port));
-@@ -1198,8 +1193,8 @@ qca8k_setup(struct dsa_switch *ds)
- 			 * default egress vid
- 			 */
- 			ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
--					0xfff << shift,
--					QCA8K_PORT_VID_DEF << shift);
-+					QCA8K_EGREES_VLAN_PORT_MASK(i),
-+					QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF));
- 			if (ret)
- 				return ret;
- 
-@@ -1246,7 +1241,7 @@ qca8k_setup(struct dsa_switch *ds)
- 			QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
- 			QCA8K_PORT_HOL_CTRL1_WRED_EN;
- 			qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
--				  QCA8K_PORT_HOL_CTRL1_ING_BUF |
-+				  QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK |
- 				  QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
- 				  QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
- 				  QCA8K_PORT_HOL_CTRL1_WRED_EN,
-@@ -1269,8 +1264,8 @@ qca8k_setup(struct dsa_switch *ds)
- 		mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |
- 		       QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496);
- 		qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH,
--			  QCA8K_GLOBAL_FC_GOL_XON_THRES_S |
--			  QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S,
-+			  QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK |
-+			  QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK,
- 			  mask);
- 	}
- 
-@@ -1918,11 +1913,11 @@ qca8k_port_vlan_filtering(struct dsa_swi
- 
- 	if (vlan_filtering) {
- 		qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
--			  QCA8K_PORT_LOOKUP_VLAN_MODE,
-+			  QCA8K_PORT_LOOKUP_VLAN_MODE_MASK,
- 			  QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE);
- 	} else {
- 		qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
--			  QCA8K_PORT_LOOKUP_VLAN_MODE,
-+			  QCA8K_PORT_LOOKUP_VLAN_MODE_MASK,
- 			  QCA8K_PORT_LOOKUP_VLAN_MODE_NONE);
- 	}
- 
-@@ -1953,11 +1948,9 @@ qca8k_port_vlan_add(struct dsa_switch *d
- 		dev_err(priv->dev, "Failed to add VLAN to port %d (%d)", port, ret);
- 
- 	if (pvid) {
--		int shift = 16 * (port % 2);
--
- 		qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
--			  0xfff << shift,
--			  vlan->vid_end << shift);
-+			  QCA8K_EGREES_VLAN_PORT_MASK(port),
-+			  QCA8K_EGREES_VLAN_PORT(port, vlan->vid_end));
- 		qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
- 			    QCA8K_PORT_VLAN_CVID(vlan->vid_end) |
- 			    QCA8K_PORT_VLAN_SVID(vlan->vid_end));
-@@ -2050,7 +2043,7 @@ static int qca8k_read_switch_id(struct q
- 	if (ret < 0)
- 		return -ENODEV;
- 
--	id = QCA8K_MASK_CTRL_DEVICE_ID(val & QCA8K_MASK_CTRL_DEVICE_ID_MASK);
-+	id = QCA8K_MASK_CTRL_DEVICE_ID(val);
- 	if (id != data->id) {
- 		dev_err(priv->dev, "Switch id detected %x but expected %x", id, data->id);
- 		return -ENODEV;
-@@ -2059,7 +2052,7 @@ static int qca8k_read_switch_id(struct q
- 	priv->switch_id = id;
- 
- 	/* Save revision to communicate to the internal PHY driver */
--	priv->switch_revision = (val & QCA8K_MASK_CTRL_REV_ID_MASK);
-+	priv->switch_revision = QCA8K_MASK_CTRL_REV_ID(val);
- 
- 	return 0;
- }
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -30,9 +30,9 @@
- /* Global control registers */
- #define QCA8K_REG_MASK_CTRL				0x000
- #define   QCA8K_MASK_CTRL_REV_ID_MASK			GENMASK(7, 0)
--#define   QCA8K_MASK_CTRL_REV_ID(x)			((x) >> 0)
-+#define   QCA8K_MASK_CTRL_REV_ID(x)			FIELD_GET(QCA8K_MASK_CTRL_REV_ID_MASK, x)
- #define   QCA8K_MASK_CTRL_DEVICE_ID_MASK		GENMASK(15, 8)
--#define   QCA8K_MASK_CTRL_DEVICE_ID(x)			((x) >> 8)
-+#define   QCA8K_MASK_CTRL_DEVICE_ID(x)			FIELD_GET(QCA8K_MASK_CTRL_DEVICE_ID_MASK, x)
- #define QCA8K_REG_PORT0_PAD_CTRL			0x004
- #define   QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN		BIT(31)
- #define   QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE	BIT(19)
-@@ -41,12 +41,11 @@
- #define QCA8K_REG_PORT6_PAD_CTRL			0x00c
- #define   QCA8K_PORT_PAD_RGMII_EN			BIT(26)
- #define   QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK		GENMASK(23, 22)
--#define   QCA8K_PORT_PAD_RGMII_TX_DELAY(x)		((x) << 22)
-+#define   QCA8K_PORT_PAD_RGMII_TX_DELAY(x)		FIELD_PREP(QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK, x)
- #define   QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK		GENMASK(21, 20)
--#define   QCA8K_PORT_PAD_RGMII_RX_DELAY(x)		((x) << 20)
-+#define   QCA8K_PORT_PAD_RGMII_RX_DELAY(x)		FIELD_PREP(QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK, x)
- #define	  QCA8K_PORT_PAD_RGMII_TX_DELAY_EN		BIT(25)
- #define   QCA8K_PORT_PAD_RGMII_RX_DELAY_EN		BIT(24)
--#define   QCA8K_MAX_DELAY				3
- #define   QCA8K_PORT_PAD_SGMII_EN			BIT(7)
- #define QCA8K_REG_PWS					0x010
- #define   QCA8K_PWS_POWER_ON_SEL			BIT(31)
-@@ -68,10 +67,12 @@
- #define   QCA8K_MDIO_MASTER_READ			BIT(27)
- #define   QCA8K_MDIO_MASTER_WRITE			0
- #define   QCA8K_MDIO_MASTER_SUP_PRE			BIT(26)
--#define   QCA8K_MDIO_MASTER_PHY_ADDR(x)			((x) << 21)
--#define   QCA8K_MDIO_MASTER_REG_ADDR(x)			((x) << 16)
--#define   QCA8K_MDIO_MASTER_DATA(x)			(x)
-+#define   QCA8K_MDIO_MASTER_PHY_ADDR_MASK		GENMASK(25, 21)
-+#define   QCA8K_MDIO_MASTER_PHY_ADDR(x)			FIELD_PREP(QCA8K_MDIO_MASTER_PHY_ADDR_MASK, x)
-+#define   QCA8K_MDIO_MASTER_REG_ADDR_MASK		GENMASK(20, 16)
-+#define   QCA8K_MDIO_MASTER_REG_ADDR(x)			FIELD_PREP(QCA8K_MDIO_MASTER_REG_ADDR_MASK, x)
- #define   QCA8K_MDIO_MASTER_DATA_MASK			GENMASK(15, 0)
-+#define   QCA8K_MDIO_MASTER_DATA(x)			FIELD_PREP(QCA8K_MDIO_MASTER_DATA_MASK, x)
- #define   QCA8K_MDIO_MASTER_MAX_PORTS			5
- #define   QCA8K_MDIO_MASTER_MAX_REG			32
- #define QCA8K_GOL_MAC_ADDR0				0x60
-@@ -93,9 +94,7 @@
- #define   QCA8K_PORT_STATUS_FLOW_AUTO			BIT(12)
- #define QCA8K_REG_PORT_HDR_CTRL(_i)			(0x9c + (_i * 4))
- #define   QCA8K_PORT_HDR_CTRL_RX_MASK			GENMASK(3, 2)
--#define   QCA8K_PORT_HDR_CTRL_RX_S			2
- #define   QCA8K_PORT_HDR_CTRL_TX_MASK			GENMASK(1, 0)
--#define   QCA8K_PORT_HDR_CTRL_TX_S			0
- #define   QCA8K_PORT_HDR_CTRL_ALL			2
- #define   QCA8K_PORT_HDR_CTRL_MGMT			1
- #define   QCA8K_PORT_HDR_CTRL_NONE			0
-@@ -105,10 +104,11 @@
- #define   QCA8K_SGMII_EN_TX				BIT(3)
- #define   QCA8K_SGMII_EN_SD				BIT(4)
- #define   QCA8K_SGMII_CLK125M_DELAY			BIT(7)
--#define   QCA8K_SGMII_MODE_CTRL_MASK			(BIT(22) | BIT(23))
--#define   QCA8K_SGMII_MODE_CTRL_BASEX			(0 << 22)
--#define   QCA8K_SGMII_MODE_CTRL_PHY			(1 << 22)
--#define   QCA8K_SGMII_MODE_CTRL_MAC			(2 << 22)
-+#define   QCA8K_SGMII_MODE_CTRL_MASK			GENMASK(23, 22)
-+#define   QCA8K_SGMII_MODE_CTRL(x)			FIELD_PREP(QCA8K_SGMII_MODE_CTRL_MASK, x)
-+#define   QCA8K_SGMII_MODE_CTRL_BASEX			QCA8K_SGMII_MODE_CTRL(0x0)
-+#define   QCA8K_SGMII_MODE_CTRL_PHY			QCA8K_SGMII_MODE_CTRL(0x1)
-+#define   QCA8K_SGMII_MODE_CTRL_MAC			QCA8K_SGMII_MODE_CTRL(0x2)
- 
- /* MAC_PWR_SEL registers */
- #define QCA8K_REG_MAC_PWR_SEL				0x0e4
-@@ -121,100 +121,115 @@
- 
- /* ACL registers */
- #define QCA8K_REG_PORT_VLAN_CTRL0(_i)			(0x420 + (_i * 8))
--#define   QCA8K_PORT_VLAN_CVID(x)			(x << 16)
--#define   QCA8K_PORT_VLAN_SVID(x)			x
-+#define   QCA8K_PORT_VLAN_CVID_MASK			GENMASK(27, 16)
-+#define   QCA8K_PORT_VLAN_CVID(x)			FIELD_PREP(QCA8K_PORT_VLAN_CVID_MASK, x)
-+#define   QCA8K_PORT_VLAN_SVID_MASK			GENMASK(11, 0)
-+#define   QCA8K_PORT_VLAN_SVID(x)			FIELD_PREP(QCA8K_PORT_VLAN_SVID_MASK, x)
- #define QCA8K_REG_PORT_VLAN_CTRL1(_i)			(0x424 + (_i * 8))
- #define QCA8K_REG_IPV4_PRI_BASE_ADDR			0x470
- #define QCA8K_REG_IPV4_PRI_ADDR_MASK			0x474
- 
- /* Lookup registers */
- #define QCA8K_REG_ATU_DATA0				0x600
--#define   QCA8K_ATU_ADDR2_S				24
--#define   QCA8K_ATU_ADDR3_S				16
--#define   QCA8K_ATU_ADDR4_S				8
-+#define   QCA8K_ATU_ADDR2_MASK				GENMASK(31, 24)
-+#define   QCA8K_ATU_ADDR3_MASK				GENMASK(23, 16)
-+#define   QCA8K_ATU_ADDR4_MASK				GENMASK(15, 8)
-+#define   QCA8K_ATU_ADDR5_MASK				GENMASK(7, 0)
- #define QCA8K_REG_ATU_DATA1				0x604
--#define   QCA8K_ATU_PORT_M				0x7f
--#define   QCA8K_ATU_PORT_S				16
--#define   QCA8K_ATU_ADDR0_S				8
-+#define   QCA8K_ATU_PORT_MASK				GENMASK(22, 16)
-+#define   QCA8K_ATU_ADDR0_MASK				GENMASK(15, 8)
-+#define   QCA8K_ATU_ADDR1_MASK				GENMASK(7, 0)
- #define QCA8K_REG_ATU_DATA2				0x608
--#define   QCA8K_ATU_VID_M				0xfff
--#define   QCA8K_ATU_VID_S				8
--#define   QCA8K_ATU_STATUS_M				0xf
-+#define   QCA8K_ATU_VID_MASK				GENMASK(19, 8)
-+#define   QCA8K_ATU_STATUS_MASK				GENMASK(3, 0)
- #define   QCA8K_ATU_STATUS_STATIC			0xf
- #define QCA8K_REG_ATU_FUNC				0x60c
- #define   QCA8K_ATU_FUNC_BUSY				BIT(31)
- #define   QCA8K_ATU_FUNC_PORT_EN			BIT(14)
- #define   QCA8K_ATU_FUNC_MULTI_EN			BIT(13)
- #define   QCA8K_ATU_FUNC_FULL				BIT(12)
--#define   QCA8K_ATU_FUNC_PORT_M				0xf
--#define   QCA8K_ATU_FUNC_PORT_S				8
-+#define   QCA8K_ATU_FUNC_PORT_MASK			GENMASK(11, 8)
- #define QCA8K_REG_VTU_FUNC0				0x610
- #define   QCA8K_VTU_FUNC0_VALID				BIT(20)
- #define   QCA8K_VTU_FUNC0_IVL_EN			BIT(19)
--#define   QCA8K_VTU_FUNC0_EG_MODE_S(_i)			(4 + (_i) * 2)
--#define   QCA8K_VTU_FUNC0_EG_MODE_MASK			3
--#define   QCA8K_VTU_FUNC0_EG_MODE_UNMOD			0
--#define   QCA8K_VTU_FUNC0_EG_MODE_UNTAG			1
--#define   QCA8K_VTU_FUNC0_EG_MODE_TAG			2
--#define   QCA8K_VTU_FUNC0_EG_MODE_NOT			3
-+/*        QCA8K_VTU_FUNC0_EG_MODE_MASK			GENMASK(17, 4)
-+ *          It does contain VLAN_MODE for each port [5:4] for port0,
-+ *          [7:6] for port1 ... [17:16] for port6. Use virtual port
-+ *          define to handle this.
-+ */
-+#define   QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i)	(4 + (_i) * 2)
-+#define   QCA8K_VTU_FUNC0_EG_MODE_MASK			GENMASK(1, 0)
-+#define   QCA8K_VTU_FUNC0_EG_MODE_PORT_MASK(_i)		(GENMASK(1, 0) << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i))
-+#define   QCA8K_VTU_FUNC0_EG_MODE_UNMOD			FIELD_PREP(QCA8K_VTU_FUNC0_EG_MODE_MASK, 0x0)
-+#define   QCA8K_VTU_FUNC0_EG_MODE_PORT_UNMOD(_i)	(QCA8K_VTU_FUNC0_EG_MODE_UNMOD << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i))
-+#define   QCA8K_VTU_FUNC0_EG_MODE_UNTAG			FIELD_PREP(QCA8K_VTU_FUNC0_EG_MODE_MASK, 0x1)
-+#define   QCA8K_VTU_FUNC0_EG_MODE_PORT_UNTAG(_i)	(QCA8K_VTU_FUNC0_EG_MODE_UNTAG << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i))
-+#define   QCA8K_VTU_FUNC0_EG_MODE_TAG			FIELD_PREP(QCA8K_VTU_FUNC0_EG_MODE_MASK, 0x2)
-+#define   QCA8K_VTU_FUNC0_EG_MODE_PORT_TAG(_i)		(QCA8K_VTU_FUNC0_EG_MODE_TAG << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i))
-+#define   QCA8K_VTU_FUNC0_EG_MODE_NOT			FIELD_PREP(QCA8K_VTU_FUNC0_EG_MODE_MASK, 0x3)
-+#define   QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(_i)		(QCA8K_VTU_FUNC0_EG_MODE_NOT << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i))
- #define QCA8K_REG_VTU_FUNC1				0x614
- #define   QCA8K_VTU_FUNC1_BUSY				BIT(31)
--#define   QCA8K_VTU_FUNC1_VID_S				16
-+#define   QCA8K_VTU_FUNC1_VID_MASK			GENMASK(27, 16)
- #define   QCA8K_VTU_FUNC1_FULL				BIT(4)
- #define QCA8K_REG_GLOBAL_FW_CTRL0			0x620
- #define   QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN		BIT(10)
- #define QCA8K_REG_GLOBAL_FW_CTRL1			0x624
--#define   QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S		24
--#define   QCA8K_GLOBAL_FW_CTRL1_BC_DP_S			16
--#define   QCA8K_GLOBAL_FW_CTRL1_MC_DP_S			8
--#define   QCA8K_GLOBAL_FW_CTRL1_UC_DP_S			0
-+#define   QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK		GENMASK(30, 24)
-+#define   QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK		GENMASK(22, 16)
-+#define   QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK		GENMASK(14, 8)
-+#define   QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK		GENMASK(6, 0)
- #define QCA8K_PORT_LOOKUP_CTRL(_i)			(0x660 + (_i) * 0xc)
- #define   QCA8K_PORT_LOOKUP_MEMBER			GENMASK(6, 0)
--#define   QCA8K_PORT_LOOKUP_VLAN_MODE			GENMASK(9, 8)
--#define   QCA8K_PORT_LOOKUP_VLAN_MODE_NONE		(0 << 8)
--#define   QCA8K_PORT_LOOKUP_VLAN_MODE_FALLBACK		(1 << 8)
--#define   QCA8K_PORT_LOOKUP_VLAN_MODE_CHECK		(2 << 8)
--#define   QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE		(3 << 8)
-+#define   QCA8K_PORT_LOOKUP_VLAN_MODE_MASK		GENMASK(9, 8)
-+#define   QCA8K_PORT_LOOKUP_VLAN_MODE(x)		FIELD_PREP(QCA8K_PORT_LOOKUP_VLAN_MODE_MASK, x)
-+#define   QCA8K_PORT_LOOKUP_VLAN_MODE_NONE		QCA8K_PORT_LOOKUP_VLAN_MODE(0x0)
-+#define   QCA8K_PORT_LOOKUP_VLAN_MODE_FALLBACK		QCA8K_PORT_LOOKUP_VLAN_MODE(0x1)
-+#define   QCA8K_PORT_LOOKUP_VLAN_MODE_CHECK		QCA8K_PORT_LOOKUP_VLAN_MODE(0x2)
-+#define   QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE		QCA8K_PORT_LOOKUP_VLAN_MODE(0x3)
- #define   QCA8K_PORT_LOOKUP_STATE_MASK			GENMASK(18, 16)
--#define   QCA8K_PORT_LOOKUP_STATE_DISABLED		(0 << 16)
--#define   QCA8K_PORT_LOOKUP_STATE_BLOCKING		(1 << 16)
--#define   QCA8K_PORT_LOOKUP_STATE_LISTENING		(2 << 16)
--#define   QCA8K_PORT_LOOKUP_STATE_LEARNING		(3 << 16)
--#define   QCA8K_PORT_LOOKUP_STATE_FORWARD		(4 << 16)
--#define   QCA8K_PORT_LOOKUP_STATE			GENMASK(18, 16)
-+#define   QCA8K_PORT_LOOKUP_STATE(x)			FIELD_PREP(QCA8K_PORT_LOOKUP_STATE_MASK, x)
-+#define   QCA8K_PORT_LOOKUP_STATE_DISABLED		QCA8K_PORT_LOOKUP_STATE(0x0)
-+#define   QCA8K_PORT_LOOKUP_STATE_BLOCKING		QCA8K_PORT_LOOKUP_STATE(0x1)
-+#define   QCA8K_PORT_LOOKUP_STATE_LISTENING		QCA8K_PORT_LOOKUP_STATE(0x2)
-+#define   QCA8K_PORT_LOOKUP_STATE_LEARNING		QCA8K_PORT_LOOKUP_STATE(0x3)
-+#define   QCA8K_PORT_LOOKUP_STATE_FORWARD		QCA8K_PORT_LOOKUP_STATE(0x4)
- #define   QCA8K_PORT_LOOKUP_LEARN			BIT(20)
- 
- #define QCA8K_REG_GLOBAL_FC_THRESH			0x800
--#define   QCA8K_GLOBAL_FC_GOL_XON_THRES(x)		((x) << 16)
--#define   QCA8K_GLOBAL_FC_GOL_XON_THRES_S		GENMASK(24, 16)
--#define   QCA8K_GLOBAL_FC_GOL_XOFF_THRES(x)		((x) << 0)
--#define   QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S		GENMASK(8, 0)
-+#define   QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK		GENMASK(24, 16)
-+#define   QCA8K_GLOBAL_FC_GOL_XON_THRES(x)		FIELD_PREP(QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK, x)
-+#define   QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK		GENMASK(8, 0)
-+#define   QCA8K_GLOBAL_FC_GOL_XOFF_THRES(x)		FIELD_PREP(QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK, x)
- 
- #define QCA8K_REG_PORT_HOL_CTRL0(_i)			(0x970 + (_i) * 0x8)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF		GENMASK(3, 0)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PRI0(x)		((x) << 0)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF		GENMASK(7, 4)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PRI1(x)		((x) << 4)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF		GENMASK(11, 8)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PRI2(x)		((x) << 8)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF		GENMASK(15, 12)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PRI3(x)		((x) << 12)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF		GENMASK(19, 16)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PRI4(x)		((x) << 16)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF		GENMASK(23, 20)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PRI5(x)		((x) << 20)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF		GENMASK(29, 24)
--#define   QCA8K_PORT_HOL_CTRL0_EG_PORT(x)		((x) << 24)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF_MASK		GENMASK(3, 0)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI0(x)		FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF_MASK, x)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF_MASK		GENMASK(7, 4)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI1(x)		FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF_MASK, x)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF_MASK		GENMASK(11, 8)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI2(x)		FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF_MASK, x)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF_MASK		GENMASK(15, 12)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI3(x)		FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF_MASK, x)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF_MASK		GENMASK(19, 16)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI4(x)		FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF_MASK, x)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF_MASK		GENMASK(23, 20)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PRI5(x)		FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF_MASK, x)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF_MASK		GENMASK(29, 24)
-+#define   QCA8K_PORT_HOL_CTRL0_EG_PORT(x)		FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF_MASK, x)
- 
- #define QCA8K_REG_PORT_HOL_CTRL1(_i)			(0x974 + (_i) * 0x8)
--#define   QCA8K_PORT_HOL_CTRL1_ING_BUF			GENMASK(3, 0)
--#define   QCA8K_PORT_HOL_CTRL1_ING(x)			((x) << 0)
-+#define   QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK		GENMASK(3, 0)
-+#define   QCA8K_PORT_HOL_CTRL1_ING(x)			FIELD_PREP(QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK, x)
- #define   QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN		BIT(6)
- #define   QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN		BIT(7)
- #define   QCA8K_PORT_HOL_CTRL1_WRED_EN			BIT(8)
- #define   QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN		BIT(16)
- 
- /* Pkt edit registers */
-+#define QCA8K_EGREES_VLAN_PORT_SHIFT(_i)		(16 * ((_i) % 2))
-+#define QCA8K_EGREES_VLAN_PORT_MASK(_i)			(GENMASK(11, 0) << QCA8K_EGREES_VLAN_PORT_SHIFT(_i))
-+#define QCA8K_EGREES_VLAN_PORT(_i, x)			((x) << QCA8K_EGREES_VLAN_PORT_SHIFT(_i))
- #define QCA8K_EGRESS_VLAN(x)				(0x0c70 + (4 * (x / 2)))
- 
- /* L3 registers */
diff --git a/target/linux/generic/backport-5.10/755-net-next-net-dsa-qca8k-remove-extra-mutex_init-in-qca8k_setup.patch b/target/linux/generic/backport-5.10/755-net-next-net-dsa-qca8k-remove-extra-mutex_init-in-qca8k_setup.patch
deleted file mode 100644
index 8c39b8ea295a..000000000000
--- a/target/linux/generic/backport-5.10/755-net-next-net-dsa-qca8k-remove-extra-mutex_init-in-qca8k_setup.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 994c28b6f971fa5db8ae977daea37eee87d93d51 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 22 Nov 2021 16:23:42 +0100
-Subject: net: dsa: qca8k: remove extra mutex_init in qca8k_setup
-
-Mutex is already init in sw_probe. Remove the extra init in qca8k_setup.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1086,8 +1086,6 @@ qca8k_setup(struct dsa_switch *ds)
- 	if (ret)
- 		return ret;
- 
--	mutex_init(&priv->reg_mutex);
--
- 	/* Start by setting up the register mapping */
- 	priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
- 					&qca8k_regmap_config);
diff --git a/target/linux/generic/backport-5.10/756-net-next-net-dsa-qca8k-move-regmap-init-in-probe-and-set-it.patch b/target/linux/generic/backport-5.10/756-net-next-net-dsa-qca8k-move-regmap-init-in-probe-and-set-it.patch
deleted file mode 100644
index 9fcc74a7cecd..000000000000
--- a/target/linux/generic/backport-5.10/756-net-next-net-dsa-qca8k-move-regmap-init-in-probe-and-set-it.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 36b8af12f424e7a7f60a935c60a0fd4aa0822378 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 22 Nov 2021 16:23:43 +0100
-Subject: net: dsa: qca8k: move regmap init in probe and set it mandatory
-
-In preparation for regmap conversion, move regmap init in the probe
-function and make it mandatory as any read/write/rmw operation will be
-converted to regmap API.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 14 ++++++++------
- 1 file changed, 8 insertions(+), 6 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1086,12 +1086,6 @@ qca8k_setup(struct dsa_switch *ds)
- 	if (ret)
- 		return ret;
- 
--	/* Start by setting up the register mapping */
--	priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
--					&qca8k_regmap_config);
--	if (IS_ERR(priv->regmap))
--		dev_warn(priv->dev, "regmap initialization failed");
--
- 	ret = qca8k_setup_mdio_bus(priv);
- 	if (ret)
- 		return ret;
-@@ -2085,6 +2079,14 @@ qca8k_sw_probe(struct mdio_device *mdiod
- 		gpiod_set_value_cansleep(priv->reset_gpio, 0);
- 	}
- 
-+	/* Start by setting up the register mapping */
-+	priv->regmap = devm_regmap_init(&mdiodev->dev, NULL, priv,
-+					&qca8k_regmap_config);
-+	if (IS_ERR(priv->regmap)) {
-+		dev_err(priv->dev, "regmap initialization failed");
-+		return PTR_ERR(priv->regmap);
-+	}
-+
- 	/* Check the detected switch id */
- 	ret = qca8k_read_switch_id(priv);
- 	if (ret)
diff --git a/target/linux/generic/backport-5.10/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch b/target/linux/generic/backport-5.10/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch
deleted file mode 100644
index 4ca9c8ba41d6..000000000000
--- a/target/linux/generic/backport-5.10/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch
+++ /dev/null
@@ -1,249 +0,0 @@
-From 8b5f3f29a81a71934d004e21a1292c1148b05926 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 22 Nov 2021 16:23:44 +0100
-Subject: net: dsa: qca8k: initial conversion to regmap helper
-
-Convert any qca8k set/clear/pool to regmap helper and add
-missing config to regmap_config struct.
-Read/write/rmw operation are reworked to use the regmap helper
-internally to keep the delta of this patch low. These additional
-function will then be dropped when the code split will be proposed.
-
-Ipq40xx SoC have the internal switch based on the qca8k regmap but use
-mmio for read/write/rmw operation instead of mdio.
-In preparation for the support of this internal switch, convert the
-driver to regmap API to later split the driver to common and specific
-code. The overhead introduced by the use of regamp API is marginal as the
-internal mdio will bypass it by using its direct access and regmap will be
-used only by configuration functions or fdb access.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 107 +++++++++++++++++++++---------------------------
- 1 file changed, 47 insertions(+), 60 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -10,6 +10,7 @@
- #include <linux/phy.h>
- #include <linux/netdevice.h>
- #include <linux/bitfield.h>
-+#include <linux/regmap.h>
- #include <net/dsa.h>
- #include <linux/of_net.h>
- #include <linux/of_mdio.h>
-@@ -152,6 +153,25 @@ qca8k_set_page(struct mii_bus *bus, u16
- static int
- qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val)
- {
-+	return regmap_read(priv->regmap, reg, val);
-+}
-+
-+static int
-+qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
-+{
-+	return regmap_write(priv->regmap, reg, val);
-+}
-+
-+static int
-+qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
-+{
-+	return regmap_update_bits(priv->regmap, reg, mask, write_val);
-+}
-+
-+static int
-+qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
-+{
-+	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
- 	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 	int ret;
-@@ -172,8 +192,9 @@ exit:
- }
- 
- static int
--qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
-+qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
- {
-+	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
- 	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 	int ret;
-@@ -194,8 +215,9 @@ exit:
- }
- 
- static int
--qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
-+qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val)
- {
-+	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
- 	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 	u32 val;
-@@ -223,34 +245,6 @@ exit:
- 	return ret;
- }
- 
--static int
--qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val)
--{
--	return qca8k_rmw(priv, reg, 0, val);
--}
--
--static int
--qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val)
--{
--	return qca8k_rmw(priv, reg, val, 0);
--}
--
--static int
--qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
--{
--	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
--
--	return qca8k_read(priv, reg, val);
--}
--
--static int
--qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
--{
--	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
--
--	return qca8k_write(priv, reg, val);
--}
--
- static const struct regmap_range qca8k_readable_ranges[] = {
- 	regmap_reg_range(0x0000, 0x00e4), /* Global control */
- 	regmap_reg_range(0x0100, 0x0168), /* EEE control */
-@@ -282,26 +276,19 @@ static struct regmap_config qca8k_regmap
- 	.max_register = 0x16ac, /* end MIB - Port6 range */
- 	.reg_read = qca8k_regmap_read,
- 	.reg_write = qca8k_regmap_write,
-+	.reg_update_bits = qca8k_regmap_update_bits,
- 	.rd_table = &qca8k_readable_table,
-+	.disable_locking = true, /* Locking is handled by qca8k read/write */
-+	.cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */
- };
- 
- static int
- qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
- {
--	int ret, ret1;
- 	u32 val;
- 
--	ret = read_poll_timeout(qca8k_read, ret1, !(val & mask),
--				0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
--				priv, reg, &val);
--
--	/* Check if qca8k_read has failed for a different reason
--	 * before returning -ETIMEDOUT
--	 */
--	if (ret < 0 && ret1 < 0)
--		return ret1;
--
--	return ret;
-+	return regmap_read_poll_timeout(priv->regmap, reg, val, !(val & mask), 0,
-+				       QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC);
- }
- 
- static int
-@@ -568,7 +555,7 @@ qca8k_mib_init(struct qca8k_priv *priv)
- 	int ret;
- 
- 	mutex_lock(&priv->reg_mutex);
--	ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
-+	ret = regmap_set_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
- 	if (ret)
- 		goto exit;
- 
-@@ -576,7 +563,7 @@ qca8k_mib_init(struct qca8k_priv *priv)
- 	if (ret)
- 		goto exit;
- 
--	ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
-+	ret = regmap_set_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
- 	if (ret)
- 		goto exit;
- 
-@@ -597,9 +584,9 @@ qca8k_port_set_status(struct qca8k_priv
- 		mask |= QCA8K_PORT_STATUS_LINK_AUTO;
- 
- 	if (enable)
--		qca8k_reg_set(priv, QCA8K_REG_PORT_STATUS(port), mask);
-+		regmap_set_bits(priv->regmap, QCA8K_REG_PORT_STATUS(port), mask);
- 	else
--		qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask);
-+		regmap_clear_bits(priv->regmap, QCA8K_REG_PORT_STATUS(port), mask);
- }
- 
- static u32
-@@ -861,8 +848,8 @@ qca8k_setup_mdio_bus(struct qca8k_priv *
- 		 * a dt-overlay and driver reload changed the configuration
- 		 */
- 
--		return qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
--				       QCA8K_MDIO_MASTER_EN);
-+		return regmap_clear_bits(priv->regmap, QCA8K_MDIO_MASTER_CTRL,
-+					 QCA8K_MDIO_MASTER_EN);
- 	}
- 
- 	/* Check if the devicetree declare the port:phy mapping */
-@@ -1099,16 +1086,16 @@ qca8k_setup(struct dsa_switch *ds)
- 		return ret;
- 
- 	/* Make sure MAC06 is disabled */
--	ret = qca8k_reg_clear(priv, QCA8K_REG_PORT0_PAD_CTRL,
--			      QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN);
-+	ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL,
-+				QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN);
- 	if (ret) {
- 		dev_err(priv->dev, "failed disabling MAC06 exchange");
- 		return ret;
- 	}
- 
- 	/* Enable CPU Port */
--	ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
--			    QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
-+	ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
-+			      QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
- 	if (ret) {
- 		dev_err(priv->dev, "failed enabling CPU port");
- 		return ret;
-@@ -1176,8 +1163,8 @@ qca8k_setup(struct dsa_switch *ds)
- 				return ret;
- 
- 			/* Enable ARP Auto-learning by default */
--			ret = qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i),
--					    QCA8K_PORT_LOOKUP_LEARN);
-+			ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
-+					      QCA8K_PORT_LOOKUP_LEARN);
- 			if (ret)
- 				return ret;
- 
-@@ -1745,9 +1732,9 @@ qca8k_port_bridge_join(struct dsa_switch
- 		/* Add this port to the portvlan mask of the other ports
- 		 * in the bridge
- 		 */
--		ret = qca8k_reg_set(priv,
--				    QCA8K_PORT_LOOKUP_CTRL(i),
--				    BIT(port));
-+		ret = regmap_set_bits(priv->regmap,
-+				      QCA8K_PORT_LOOKUP_CTRL(i),
-+				      BIT(port));
- 		if (ret)
- 			return ret;
- 		if (i != port)
-@@ -1777,9 +1764,9 @@ qca8k_port_bridge_leave(struct dsa_switc
- 		/* Remove this port to the portvlan mask of the other ports
- 		 * in the bridge
- 		 */
--		qca8k_reg_clear(priv,
--				QCA8K_PORT_LOOKUP_CTRL(i),
--				BIT(port));
-+		regmap_clear_bits(priv->regmap,
-+				  QCA8K_PORT_LOOKUP_CTRL(i),
-+				  BIT(port));
- 	}
- 
- 	/* Set the cpu port to be the only one in the portvlan mask of
diff --git a/target/linux/generic/backport-5.10/758-net-next-net-dsa-qca8k-add-additional-MIB-counter-and-.patch b/target/linux/generic/backport-5.10/758-net-next-net-dsa-qca8k-add-additional-MIB-counter-and-.patch
deleted file mode 100644
index 78bdf7f77d53..000000000000
--- a/target/linux/generic/backport-5.10/758-net-next-net-dsa-qca8k-add-additional-MIB-counter-and-.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From c126f118b330ccf0db0dda4a4bd6c729865a205f Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 22 Nov 2021 16:23:45 +0100
-Subject: net: dsa: qca8k: add additional MIB counter and make it dynamic
-
-We are currently missing 2 additionals MIB counter present in QCA833x
-switch.
-QC832x switch have 39 MIB counter and QCA833X have 41 MIB counter.
-Add the additional MIB counter and rework the MIB function to print the
-correct supported counter from the match_data struct.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 23 ++++++++++++++++++++---
- drivers/net/dsa/qca8k.h |  4 ++++
- 2 files changed, 24 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -70,6 +70,8 @@ static const struct qca8k_mib_desc ar832
- 	MIB_DESC(1, 0x9c, "TxExcDefer"),
- 	MIB_DESC(1, 0xa0, "TxDefer"),
- 	MIB_DESC(1, 0xa4, "TxLateCol"),
-+	MIB_DESC(1, 0xa8, "RXUnicast"),
-+	MIB_DESC(1, 0xac, "TXUnicast"),
- };
- 
- /* The 32bit switch registers are accessed indirectly. To achieve this we need
-@@ -1605,12 +1607,16 @@ qca8k_phylink_mac_link_up(struct dsa_swi
- static void
- qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data)
- {
-+	const struct qca8k_match_data *match_data;
-+	struct qca8k_priv *priv = ds->priv;
- 	int i;
- 
- 	if (stringset != ETH_SS_STATS)
- 		return;
- 
--	for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++)
-+	match_data = of_device_get_match_data(priv->dev);
-+
-+	for (i = 0; i < match_data->mib_count; i++)
- 		strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
- 			ETH_GSTRING_LEN);
- }
-@@ -1620,12 +1626,15 @@ qca8k_get_ethtool_stats(struct dsa_switc
- 			uint64_t *data)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-+	const struct qca8k_match_data *match_data;
- 	const struct qca8k_mib_desc *mib;
- 	u32 reg, i, val;
- 	u32 hi = 0;
- 	int ret;
- 
--	for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
-+	match_data = of_device_get_match_data(priv->dev);
-+
-+	for (i = 0; i < match_data->mib_count; i++) {
- 		mib = &ar8327_mib[i];
- 		reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset;
- 
-@@ -1648,10 +1657,15 @@ qca8k_get_ethtool_stats(struct dsa_switc
- static int
- qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset)
- {
-+	const struct qca8k_match_data *match_data;
-+	struct qca8k_priv *priv = ds->priv;
-+
- 	if (sset != ETH_SS_STATS)
- 		return 0;
- 
--	return ARRAY_SIZE(ar8327_mib);
-+	match_data = of_device_get_match_data(priv->dev);
-+
-+	return match_data->mib_count;
- }
- 
- static int
-@@ -2146,14 +2160,17 @@ static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
- static const struct qca8k_match_data qca8327 = {
- 	.id = QCA8K_ID_QCA8327,
- 	.reduced_package = true,
-+	.mib_count = QCA8K_QCA832X_MIB_COUNT,
- };
- 
- static const struct qca8k_match_data qca8328 = {
- 	.id = QCA8K_ID_QCA8327,
-+	.mib_count = QCA8K_QCA832X_MIB_COUNT,
- };
- 
- static const struct qca8k_match_data qca833x = {
- 	.id = QCA8K_ID_QCA8337,
-+	.mib_count = QCA8K_QCA833X_MIB_COUNT,
- };
- 
- static const struct of_device_id qca8k_of_match[] = {
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -21,6 +21,9 @@
- #define PHY_ID_QCA8337					0x004dd036
- #define QCA8K_ID_QCA8337				0x13
- 
-+#define QCA8K_QCA832X_MIB_COUNT				39
-+#define QCA8K_QCA833X_MIB_COUNT				41
-+
- #define QCA8K_BUSY_WAIT_TIMEOUT				2000
- 
- #define QCA8K_NUM_FDB_RECORDS				2048
-@@ -279,6 +282,7 @@ struct ar8xxx_port_status {
- struct qca8k_match_data {
- 	u8 id;
- 	bool reduced_package;
-+	u8 mib_count;
- };
- 
- enum {
diff --git a/target/linux/generic/backport-5.10/759-net-next-net-dsa-qca8k-add-support-for-port-fast-aging.patch b/target/linux/generic/backport-5.10/759-net-next-net-dsa-qca8k-add-support-for-port-fast-aging.patch
deleted file mode 100644
index 41efa89b5e22..000000000000
--- a/target/linux/generic/backport-5.10/759-net-next-net-dsa-qca8k-add-support-for-port-fast-aging.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 4592538bfb0d5d3c3c8a1d7071724d081412ac91 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 22 Nov 2021 16:23:46 +0100
-Subject: net: dsa: qca8k: add support for port fast aging
-
-The switch supports fast aging by flushing any rule in the ARL
-table for a specific port.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 11 +++++++++++
- drivers/net/dsa/qca8k.h |  1 +
- 2 files changed, 12 insertions(+)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1790,6 +1790,16 @@ qca8k_port_bridge_leave(struct dsa_switc
- 		  QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port));
- }
- 
-+static void
-+qca8k_port_fast_age(struct dsa_switch *ds, int port)
-+{
-+	struct qca8k_priv *priv = ds->priv;
-+
-+	mutex_lock(&priv->reg_mutex);
-+	qca8k_fdb_access(priv, QCA8K_FDB_FLUSH_PORT, port);
-+	mutex_unlock(&priv->reg_mutex);
-+}
-+
- static int
- qca8k_port_enable(struct dsa_switch *ds, int port,
- 		  struct phy_device *phy)
-@@ -2005,6 +2015,7 @@ static const struct dsa_switch_ops qca8k
- 	.port_stp_state_set	= qca8k_port_stp_state_set,
- 	.port_bridge_join	= qca8k_port_bridge_join,
- 	.port_bridge_leave	= qca8k_port_bridge_leave,
-+	.port_fast_age		= qca8k_port_fast_age,
- 	.port_fdb_add		= qca8k_port_fdb_add,
- 	.port_fdb_del		= qca8k_port_fdb_del,
- 	.port_fdb_dump		= qca8k_port_fdb_dump,
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -262,6 +262,7 @@ enum qca8k_fdb_cmd {
- 	QCA8K_FDB_FLUSH	= 1,
- 	QCA8K_FDB_LOAD = 2,
- 	QCA8K_FDB_PURGE = 3,
-+	QCA8K_FDB_FLUSH_PORT = 5,
- 	QCA8K_FDB_NEXT = 6,
- 	QCA8K_FDB_SEARCH = 7,
- };
diff --git a/target/linux/generic/backport-5.10/760-net-next-net-dsa-qca8k-add-set_ageing_time-support.patch b/target/linux/generic/backport-5.10/760-net-next-net-dsa-qca8k-add-set_ageing_time-support.patch
deleted file mode 100644
index f32e6ae93a70..000000000000
--- a/target/linux/generic/backport-5.10/760-net-next-net-dsa-qca8k-add-set_ageing_time-support.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 6a3bdc5209f45d2af83aa92433ab6e5cf2297aa4 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 22 Nov 2021 16:23:47 +0100
-Subject: net: dsa: qca8k: add set_ageing_time support
-
-qca8k support setting ageing time in step of 7s. Add support for it and
-set the max value accepted of 7645m.
-Documentation talks about support for 10000m but that values doesn't
-make sense as the value doesn't match the max value in the reg.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 25 +++++++++++++++++++++++++
- drivers/net/dsa/qca8k.h |  3 +++
- 2 files changed, 28 insertions(+)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -1261,6 +1261,10 @@ qca8k_setup(struct dsa_switch *ds)
- 	/* We don't have interrupts for link changes, so we need to poll */
- 	ds->pcs_poll = true;
- 
-+	/* Set min a max ageing value supported */
-+	ds->ageing_time_min = 7000;
-+	ds->ageing_time_max = 458745000;
-+
- 	return 0;
- }
- 
-@@ -1801,6 +1805,26 @@ qca8k_port_fast_age(struct dsa_switch *d
- }
- 
- static int
-+qca8k_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
-+{
-+	struct qca8k_priv *priv = ds->priv;
-+	unsigned int secs = msecs / 1000;
-+	u32 val;
-+
-+	/* AGE_TIME reg is set in 7s step */
-+	val = secs / 7;
-+
-+	/* Handle case with 0 as val to NOT disable
-+	 * learning
-+	 */
-+	if (!val)
-+		val = 1;
-+
-+	return regmap_update_bits(priv->regmap, QCA8K_REG_ATU_CTRL, QCA8K_ATU_AGE_TIME_MASK,
-+				  QCA8K_ATU_AGE_TIME(val));
-+}
-+
-+static int
- qca8k_port_enable(struct dsa_switch *ds, int port,
- 		  struct phy_device *phy)
- {
-@@ -2006,6 +2030,7 @@ static const struct dsa_switch_ops qca8k
- 	.get_strings		= qca8k_get_strings,
- 	.get_ethtool_stats	= qca8k_get_ethtool_stats,
- 	.get_sset_count		= qca8k_get_sset_count,
-+	.set_ageing_time	= qca8k_set_ageing_time,
- 	.get_mac_eee		= qca8k_get_mac_eee,
- 	.set_mac_eee		= qca8k_set_mac_eee,
- 	.port_enable		= qca8k_port_enable,
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -175,6 +175,9 @@
- #define   QCA8K_VTU_FUNC1_BUSY				BIT(31)
- #define   QCA8K_VTU_FUNC1_VID_MASK			GENMASK(27, 16)
- #define   QCA8K_VTU_FUNC1_FULL				BIT(4)
-+#define QCA8K_REG_ATU_CTRL				0x618
-+#define   QCA8K_ATU_AGE_TIME_MASK			GENMASK(15, 0)
-+#define   QCA8K_ATU_AGE_TIME(x)				FIELD_PREP(QCA8K_ATU_AGE_TIME_MASK, (x))
- #define QCA8K_REG_GLOBAL_FW_CTRL0			0x620
- #define   QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN		BIT(10)
- #define QCA8K_REG_GLOBAL_FW_CTRL1			0x624
diff --git a/target/linux/generic/backport-5.10/761-net-next-net-dsa-qca8k-add-support-for-mdb_add-del.patch b/target/linux/generic/backport-5.10/761-net-next-net-dsa-qca8k-add-support-for-mdb_add-del.patch
deleted file mode 100644
index e0daa88c3120..000000000000
--- a/target/linux/generic/backport-5.10/761-net-next-net-dsa-qca8k-add-support-for-mdb_add-del.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From ba8f870dfa635113ce6e8095a5eb1835ecde2e9e Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 22 Nov 2021 16:23:48 +0100
-Subject: net: dsa: qca8k: add support for mdb_add/del
-
-Add support for mdb add/del function. The ARL table is used to insert
-the rule. The rule will be searched, deleted and reinserted with the
-port mask updated. The function will check if the rule has to be updated
-or insert directly with no deletion of the old rule.
-If every port is removed from the port mask, the rule is removed.
-The rule is set STATIC in the ARL table (aka it doesn't age) to not be
-flushed by fast age function.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 99 insertions(+)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -436,6 +436,81 @@ qca8k_fdb_flush(struct qca8k_priv *priv)
- }
- 
- static int
-+qca8k_fdb_search_and_insert(struct qca8k_priv *priv, u8 port_mask,
-+			    const u8 *mac, u16 vid)
-+{
-+	struct qca8k_fdb fdb = { 0 };
-+	int ret;
-+
-+	mutex_lock(&priv->reg_mutex);
-+
-+	qca8k_fdb_write(priv, vid, 0, mac, 0);
-+	ret = qca8k_fdb_access(priv, QCA8K_FDB_SEARCH, -1);
-+	if (ret < 0)
-+		goto exit;
-+
-+	ret = qca8k_fdb_read(priv, &fdb);
-+	if (ret < 0)
-+		goto exit;
-+
-+	/* Rule exist. Delete first */
-+	if (!fdb.aging) {
-+		ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
-+		if (ret)
-+			goto exit;
-+	}
-+
-+	/* Add port to fdb portmask */
-+	fdb.port_mask |= port_mask;
-+
-+	qca8k_fdb_write(priv, vid, fdb.port_mask, mac, fdb.aging);
-+	ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
-+
-+exit:
-+	mutex_unlock(&priv->reg_mutex);
-+	return ret;
-+}
-+
-+static int
-+qca8k_fdb_search_and_del(struct qca8k_priv *priv, u8 port_mask,
-+			 const u8 *mac, u16 vid)
-+{
-+	struct qca8k_fdb fdb = { 0 };
-+	int ret;
-+
-+	mutex_lock(&priv->reg_mutex);
-+
-+	qca8k_fdb_write(priv, vid, 0, mac, 0);
-+	ret = qca8k_fdb_access(priv, QCA8K_FDB_SEARCH, -1);
-+	if (ret < 0)
-+		goto exit;
-+
-+	/* Rule doesn't exist. Why delete? */
-+	if (!fdb.aging) {
-+		ret = -EINVAL;
-+		goto exit;
-+	}
-+
-+	ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
-+	if (ret)
-+		goto exit;
-+
-+	/* Only port in the rule is this port. Don't re insert */
-+	if (fdb.port_mask == port_mask)
-+		goto exit;
-+
-+	/* Remove port from port mask */
-+	fdb.port_mask &= ~port_mask;
-+
-+	qca8k_fdb_write(priv, vid, fdb.port_mask, mac, fdb.aging);
-+	ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
-+
-+exit:
-+	mutex_unlock(&priv->reg_mutex);
-+	return ret;
-+}
-+
-+static int
- qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid)
- {
- 	u32 reg;
-@@ -1929,6 +2004,28 @@ qca8k_port_fdb_dump(struct dsa_switch *d
- 	return 0;
- }
- 
-+static void
-+qca8k_port_mdb_add(struct dsa_switch *ds, int port,
-+		   const struct switchdev_obj_port_mdb *mdb)
-+{
-+	struct qca8k_priv *priv = ds->priv;
-+	const u8 *addr = mdb->addr;
-+	u16 vid = mdb->vid;
-+
-+	qca8k_fdb_search_and_insert(priv, BIT(port), addr, vid);
-+}
-+
-+static int
-+qca8k_port_mdb_del(struct dsa_switch *ds, int port,
-+		   const struct switchdev_obj_port_mdb *mdb)
-+{
-+	struct qca8k_priv *priv = ds->priv;
-+	const u8 *addr = mdb->addr;
-+	u16 vid = mdb->vid;
-+
-+	return qca8k_fdb_search_and_del(priv, BIT(port), addr, vid);
-+}
-+
- static int
- qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
- 			  struct switchdev_trans *trans)
-@@ -2044,6 +2141,8 @@ static const struct dsa_switch_ops qca8k
- 	.port_fdb_add		= qca8k_port_fdb_add,
- 	.port_fdb_del		= qca8k_port_fdb_del,
- 	.port_fdb_dump		= qca8k_port_fdb_dump,
-+	.port_mdb_add		= qca8k_port_mdb_add,
-+	.port_mdb_del		= qca8k_port_mdb_del,
- 	.port_vlan_filtering	= qca8k_port_vlan_filtering,
- 	.port_vlan_prepare	= qca8k_port_vlan_prepare,
- 	.port_vlan_add		= qca8k_port_vlan_add,
diff --git a/target/linux/generic/backport-5.10/762-v5.11-net-dsa-mt7530-support-setting-MTU.patch b/target/linux/generic/backport-5.10/762-v5.11-net-dsa-mt7530-support-setting-MTU.patch
deleted file mode 100644
index f1fa461aec01..000000000000
--- a/target/linux/generic/backport-5.10/762-v5.11-net-dsa-mt7530-support-setting-MTU.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 9470174e7581e75a8ebd78964997314dfc2e706c Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Tue, 3 Nov 2020 13:06:18 +0800
-Subject: [PATCH] net: dsa: mt7530: support setting MTU
-
-MT7530/7531 has a global RX packet length register, which can be used
-to set MTU.
-
-Supported packet length values are 1522 (1518 if untagged), 1536,
-1552, and multiple of 1024 (from 2048 to 15360).
-
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Link: https://lore.kernel.org/r/20201103050618.11419-1-dqfext@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 49 ++++++++++++++++++++++++++++++++++++++++
- drivers/net/dsa/mt7530.h | 12 ++++++++++
- 2 files changed, 61 insertions(+)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1018,6 +1018,53 @@ mt7530_port_disable(struct dsa_switch *d
- 	mutex_unlock(&priv->reg_mutex);
- }
- 
-+static int
-+mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+	struct mii_bus *bus = priv->bus;
-+	int length;
-+	u32 val;
-+
-+	/* When a new MTU is set, DSA always set the CPU port's MTU to the
-+	 * largest MTU of the slave ports. Because the switch only has a global
-+	 * RX length register, only allowing CPU port here is enough.
-+	 */
-+	if (!dsa_is_cpu_port(ds, port))
-+		return 0;
-+
-+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+
-+	val = mt7530_mii_read(priv, MT7530_GMACCR);
-+	val &= ~MAX_RX_PKT_LEN_MASK;
-+
-+	/* RX length also includes Ethernet header, MTK tag, and FCS length */
-+	length = new_mtu + ETH_HLEN + MTK_HDR_LEN + ETH_FCS_LEN;
-+	if (length <= 1522) {
-+		val |= MAX_RX_PKT_LEN_1522;
-+	} else if (length <= 1536) {
-+		val |= MAX_RX_PKT_LEN_1536;
-+	} else if (length <= 1552) {
-+		val |= MAX_RX_PKT_LEN_1552;
-+	} else {
-+		val &= ~MAX_RX_JUMBO_MASK;
-+		val |= MAX_RX_JUMBO(DIV_ROUND_UP(length, 1024));
-+		val |= MAX_RX_PKT_LEN_JUMBO;
-+	}
-+
-+	mt7530_mii_write(priv, MT7530_GMACCR, val);
-+
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return 0;
-+}
-+
-+static int
-+mt7530_port_max_mtu(struct dsa_switch *ds, int port)
-+{
-+	return MT7530_MAX_MTU;
-+}
-+
- static void
- mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state)
- {
-@@ -2650,6 +2697,8 @@ static const struct dsa_switch_ops mt753
- 	.get_sset_count		= mt7530_get_sset_count,
- 	.port_enable		= mt7530_port_enable,
- 	.port_disable		= mt7530_port_disable,
-+	.port_change_mtu	= mt7530_port_change_mtu,
-+	.port_max_mtu		= mt7530_port_max_mtu,
- 	.port_stp_state_set	= mt7530_stp_state_set,
- 	.port_bridge_join	= mt7530_port_bridge_join,
- 	.port_bridge_leave	= mt7530_port_bridge_leave,
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -11,6 +11,9 @@
- #define MT7530_NUM_FDB_RECORDS		2048
- #define MT7530_ALL_MEMBERS		0xff
- 
-+#define MTK_HDR_LEN	4
-+#define MT7530_MAX_MTU	(15 * 1024 - ETH_HLEN - ETH_FCS_LEN - MTK_HDR_LEN)
-+
- enum mt753x_id {
- 	ID_MT7530 = 0,
- 	ID_MT7621 = 1,
-@@ -301,6 +304,15 @@ enum mt7530_vlan_port_attr {
- #define MT7531_DBG_CNT(x)		(0x3018 + (x) * 0x100)
- #define  MT7531_DIS_CLR			BIT(31)
- 
-+#define MT7530_GMACCR			0x30e0
-+#define  MAX_RX_JUMBO(x)		((x) << 2)
-+#define  MAX_RX_JUMBO_MASK		GENMASK(5, 2)
-+#define  MAX_RX_PKT_LEN_MASK		GENMASK(1, 0)
-+#define  MAX_RX_PKT_LEN_1522		0x0
-+#define  MAX_RX_PKT_LEN_1536		0x1
-+#define  MAX_RX_PKT_LEN_1552		0x2
-+#define  MAX_RX_PKT_LEN_JUMBO		0x3
-+
- /* Register for MIB */
- #define MT7530_PORT_MIB_COUNTER(x)	(0x4000 + (x) * 0x100)
- #define MT7530_MIB_CCR			0x4fe0
diff --git a/target/linux/generic/backport-5.10/763-v5.11-net-dsa-mt7530-enable-MTU-normalization.patch b/target/linux/generic/backport-5.10/763-v5.11-net-dsa-mt7530-enable-MTU-normalization.patch
deleted file mode 100644
index a239549758b7..000000000000
--- a/target/linux/generic/backport-5.10/763-v5.11-net-dsa-mt7530-enable-MTU-normalization.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 771c8901568dd8776a260aa93db41be88a60389e Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Fri, 11 Dec 2020 01:03:22 +0800
-Subject: [PATCH] net: dsa: mt7530: enable MTU normalization
-
-MT7530 has a global RX length register, so we are actually changing its
-MRU.
-Enable MTU normalization for this reason.
-
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Acked-by: Landen Chao <landen.chao@mediatek.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Link: https://lore.kernel.org/r/20201210170322.3433-1-dqfext@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1706,6 +1706,7 @@ mt7530_setup(struct dsa_switch *ds)
- 	 */
- 	dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent;
- 	ds->configure_vlan_while_not_filtering = true;
-+	ds->mtu_enforcement_ingress = true;
- 
- 	if (priv->id == ID_MT7530) {
- 		regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
-@@ -1953,6 +1954,7 @@ mt7531_setup(struct dsa_switch *ds)
- 	}
- 
- 	ds->configure_vlan_while_not_filtering = true;
-+	ds->mtu_enforcement_ingress = true;
- 
- 	/* Flush the FDB table */
- 	ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
diff --git a/target/linux/generic/backport-5.10/764-v5.11-net-dsa-mt7530-support-setting-ageing-time.patch b/target/linux/generic/backport-5.10/764-v5.11-net-dsa-mt7530-support-setting-ageing-time.patch
deleted file mode 100644
index 0b28a4626ec1..000000000000
--- a/target/linux/generic/backport-5.10/764-v5.11-net-dsa-mt7530-support-setting-ageing-time.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From ea6d5c924e391872d402acac38461a5f8261e57f Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Tue, 8 Dec 2020 15:00:28 +0800
-Subject: [PATCH] net: dsa: mt7530: support setting ageing time
-
-MT7530 has a global address age control register, so use it to set
-ageing time.
-
-The applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds
-
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 41 ++++++++++++++++++++++++++++++++++++++++
- drivers/net/dsa/mt7530.h | 13 +++++++++++++
- 2 files changed, 54 insertions(+)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -873,6 +873,46 @@ mt7530_get_sset_count(struct dsa_switch
- 	return ARRAY_SIZE(mt7530_mib);
- }
- 
-+static int
-+mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+	unsigned int secs = msecs / 1000;
-+	unsigned int tmp_age_count;
-+	unsigned int error = -1;
-+	unsigned int age_count;
-+	unsigned int age_unit;
-+
-+	/* Applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds */
-+	if (secs < 1 || secs > (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1))
-+		return -ERANGE;
-+
-+	/* iterate through all possible age_count to find the closest pair */
-+	for (tmp_age_count = 0; tmp_age_count <= AGE_CNT_MAX; ++tmp_age_count) {
-+		unsigned int tmp_age_unit = secs / (tmp_age_count + 1) - 1;
-+
-+		if (tmp_age_unit <= AGE_UNIT_MAX) {
-+			unsigned int tmp_error = secs -
-+				(tmp_age_count + 1) * (tmp_age_unit + 1);
-+
-+			/* found a closer pair */
-+			if (error > tmp_error) {
-+				error = tmp_error;
-+				age_count = tmp_age_count;
-+				age_unit = tmp_age_unit;
-+			}
-+
-+			/* found the exact match, so break the loop */
-+			if (!error)
-+				break;
-+		}
-+	}
-+
-+	mt7530_write(priv, MT7530_AAC, AGE_CNT(age_count) | AGE_UNIT(age_unit));
-+
-+	return 0;
-+}
-+
- static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
- {
- 	struct mt7530_priv *priv = ds->priv;
-@@ -2697,6 +2737,7 @@ static const struct dsa_switch_ops mt753
- 	.phy_write		= mt753x_phy_write,
- 	.get_ethtool_stats	= mt7530_get_ethtool_stats,
- 	.get_sset_count		= mt7530_get_sset_count,
-+	.set_ageing_time	= mt7530_set_ageing_time,
- 	.port_enable		= mt7530_port_enable,
- 	.port_disable		= mt7530_port_disable,
- 	.port_change_mtu	= mt7530_port_change_mtu,
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -161,6 +161,19 @@ enum mt7530_vlan_egress_attr {
- 	MT7530_VLAN_EGRESS_STACK = 3,
- };
- 
-+/* Register for address age control */
-+#define MT7530_AAC			0xa0
-+/* Disable ageing */
-+#define  AGE_DIS			BIT(20)
-+/* Age count */
-+#define  AGE_CNT_MASK			GENMASK(19, 12)
-+#define  AGE_CNT_MAX			0xff
-+#define  AGE_CNT(x)			(AGE_CNT_MASK & ((x) << 12))
-+/* Age unit */
-+#define  AGE_UNIT_MASK			GENMASK(11, 0)
-+#define  AGE_UNIT_MAX			0xfff
-+#define  AGE_UNIT(x)			(AGE_UNIT_MASK & (x))
-+
- /* Register for port STP state control */
- #define MT7530_SSP_P(x)			(0x2000 + ((x) * 0x100))
- #define  FID_PST(x)			((x) & 0x3)
diff --git a/target/linux/generic/backport-5.10/770-v5.15-net-dsa-mt7530-support-MDB-operations.patch b/target/linux/generic/backport-5.10/770-v5.15-net-dsa-mt7530-support-MDB-operations.patch
deleted file mode 100644
index 99f49972ff6b..000000000000
--- a/target/linux/generic/backport-5.10/770-v5.15-net-dsa-mt7530-support-MDB-operations.patch
+++ /dev/null
@@ -1,171 +0,0 @@
-From 1f11a07a33bc26997c18b633d63f088bf75d11f2 Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Tue, 24 Aug 2021 11:37:50 +0800
-Subject: [PATCH] net: dsa: mt7530: support MDB operations
-
-This is a partial backport of commit 5a30833b9a16f8d1aa15de06636f9317ca51f9df
-("net: dsa: mt7530: support MDB and bridge flag operations") upstream.
-
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
----
- drivers/net/dsa/mt7530.c | 78 ++++++++++++++++++++++++++++++++++++++--
- net/dsa/tag_mtk.c        | 14 +-------
- 2 files changed, 76 insertions(+), 16 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1001,9 +1001,6 @@ mt753x_cpu_port_enable(struct dsa_switch
- 	mt7530_write(priv, MT7530_PVC_P(port),
- 		     PORT_SPEC_TAG);
- 
--	/* Unknown multicast frame forwarding to the cpu port */
--	mt7530_rmw(priv, MT7530_MFC, UNM_FFP_MASK, UNM_FFP(BIT(port)));
--
- 	/* Set CPU port number */
- 	if (priv->id == ID_MT7621)
- 		mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));
-@@ -1134,6 +1131,20 @@ mt7530_stp_state_set(struct dsa_switch *
- }
- 
- static int
-+mt7530_port_egress_floods(struct dsa_switch *ds, int port,
-+			  bool unicast, bool multicast)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+
-+	mt7530_rmw(priv, MT7530_MFC,
-+		   UNU_FFP(BIT(port)) | UNM_FFP(BIT(port)),
-+		   (unicast ? UNU_FFP(BIT(port)) : 0) |
-+		   (multicast ? UNM_FFP(BIT(port)) : 0));
-+
-+	return 0;
-+}
-+
-+static int
- mt7530_port_bridge_join(struct dsa_switch *ds, int port,
- 			struct net_device *bridge)
- {
-@@ -1334,6 +1345,63 @@ err:
- }
- 
- static int
-+mt7530_port_mdb_prepare(struct dsa_switch *ds, int port,
-+			const struct switchdev_obj_port_mdb *mdb)
-+{
-+	return 0;
-+}
-+
-+static void
-+mt7530_port_mdb_add(struct dsa_switch *ds, int port,
-+		    const struct switchdev_obj_port_mdb *mdb)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+	const u8 *addr = mdb->addr;
-+	u16 vid = mdb->vid;
-+	u8 port_mask = 0;
-+
-+	mutex_lock(&priv->reg_mutex);
-+
-+	mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP);
-+	if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL))
-+		port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP)
-+			    & PORT_MAP_MASK;
-+
-+	port_mask |= BIT(port);
-+	mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT);
-+	mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
-+
-+	mutex_unlock(&priv->reg_mutex);
-+}
-+
-+static int
-+mt7530_port_mdb_del(struct dsa_switch *ds, int port,
-+		    const struct switchdev_obj_port_mdb *mdb)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+	const u8 *addr = mdb->addr;
-+	u16 vid = mdb->vid;
-+	u8 port_mask = 0;
-+	int ret;
-+
-+	mutex_lock(&priv->reg_mutex);
-+
-+	mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP);
-+	if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL))
-+		port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP)
-+			    & PORT_MAP_MASK;
-+
-+	port_mask &= ~BIT(port);
-+	mt7530_fdb_write(priv, vid, port_mask, addr, -1,
-+			 port_mask ? STATIC_ENT : STATIC_EMP);
-+	ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
-+
-+	mutex_unlock(&priv->reg_mutex);
-+
-+	return ret;
-+}
-+
-+static int
- mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
- {
- 	struct mt7530_dummy_poll p;
-@@ -2743,11 +2811,15 @@ static const struct dsa_switch_ops mt753
- 	.port_change_mtu	= mt7530_port_change_mtu,
- 	.port_max_mtu		= mt7530_port_max_mtu,
- 	.port_stp_state_set	= mt7530_stp_state_set,
-+	.port_egress_floods	= mt7530_port_egress_floods,
- 	.port_bridge_join	= mt7530_port_bridge_join,
- 	.port_bridge_leave	= mt7530_port_bridge_leave,
- 	.port_fdb_add		= mt7530_port_fdb_add,
- 	.port_fdb_del		= mt7530_port_fdb_del,
- 	.port_fdb_dump		= mt7530_port_fdb_dump,
-+	.port_mdb_prepare	= mt7530_port_mdb_prepare,
-+	.port_mdb_add		= mt7530_port_mdb_add,
-+	.port_mdb_del		= mt7530_port_mdb_del,
- 	.port_vlan_filtering	= mt7530_port_vlan_filtering,
- 	.port_vlan_prepare	= mt7530_port_vlan_prepare,
- 	.port_vlan_add		= mt7530_port_vlan_add,
---- a/net/dsa/tag_mtk.c
-+++ b/net/dsa/tag_mtk.c
-@@ -24,9 +24,6 @@ static struct sk_buff *mtk_tag_xmit(stru
- 	struct dsa_port *dp = dsa_slave_to_port(dev);
- 	u8 xmit_tpid;
- 	u8 *mtk_tag;
--	unsigned char *dest = eth_hdr(skb)->h_dest;
--	bool is_multicast_skb = is_multicast_ether_addr(dest) &&
--				!is_broadcast_ether_addr(dest);
- 
- 	/* Build the special tag after the MAC Source Address. If VLAN header
- 	 * is present, it's required that VLAN header and special tag is
-@@ -55,10 +52,6 @@ static struct sk_buff *mtk_tag_xmit(stru
- 	mtk_tag[0] = xmit_tpid;
- 	mtk_tag[1] = (1 << dp->index) & MTK_HDR_XMIT_DP_BIT_MASK;
- 
--	/* Disable SA learning for multicast frames */
--	if (unlikely(is_multicast_skb))
--		mtk_tag[1] |= MTK_HDR_XMIT_SA_DIS;
--
- 	/* Tag control information is kept for 802.1Q */
- 	if (xmit_tpid == MTK_HDR_XMIT_UNTAGGED) {
- 		mtk_tag[2] = 0;
-@@ -74,9 +67,6 @@ static struct sk_buff *mtk_tag_rcv(struc
- 	u16 hdr;
- 	int port;
- 	__be16 *phdr;
--	unsigned char *dest = eth_hdr(skb)->h_dest;
--	bool is_multicast_skb = is_multicast_ether_addr(dest) &&
--				!is_broadcast_ether_addr(dest);
- 
- 	if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN)))
- 		return NULL;
-@@ -102,9 +92,7 @@ static struct sk_buff *mtk_tag_rcv(struc
- 	if (!skb->dev)
- 		return NULL;
- 
--	/* Only unicast or broadcast frames are offloaded */
--	if (likely(!is_multicast_skb))
--		dsa_default_offload_fwd_mark(skb);
-+	dsa_default_offload_fwd_mark(skb);
- 
- 	return skb;
- }
diff --git a/target/linux/generic/backport-5.10/771-v5.14-net-phy-add-MediaTek-Gigabit-Ethernet-PHY-driver.patch b/target/linux/generic/backport-5.10/771-v5.14-net-phy-add-MediaTek-Gigabit-Ethernet-PHY-driver.patch
deleted file mode 100644
index 67e3ca91eda6..000000000000
--- a/target/linux/generic/backport-5.10/771-v5.14-net-phy-add-MediaTek-Gigabit-Ethernet-PHY-driver.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From e40d2cca01893c1941f5959b14bb0cd0d4f4d099 Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Wed, 19 May 2021 11:31:59 +0800
-Subject: [PATCH] net: phy: add MediaTek Gigabit Ethernet PHY driver
-
-Add support for MediaTek Gigabit Ethernet PHYs found in MT7530 and
-MT7531 switches.
-The initialization procedure is from the vendor driver, but due to lack
-of documentation, the function of some register values remains unknown.
-
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/Kconfig       |   5 ++
- drivers/net/phy/Makefile      |   1 +
- drivers/net/phy/mediatek-ge.c | 116 ++++++++++++++++++++++++++++++++++
- 3 files changed, 122 insertions(+)
- create mode 100644 drivers/net/phy/mediatek-ge.c
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -201,6 +201,11 @@ config MARVELL_10G_PHY
- 	help
- 	  Support for the Marvell Alaska MV88X3310 and compatible PHYs.
- 
-+config MEDIATEK_GE_PHY
-+	tristate "MediaTek PHYs"
-+	help
-+	  Supports the MediaTek switch integrated PHYs.
-+
- config MICREL_PHY
- 	tristate "Micrel PHYs"
- 	help
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -63,6 +63,7 @@ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c
- obj-$(CONFIG_LXT_PHY)		+= lxt.o
- obj-$(CONFIG_MARVELL_10G_PHY)	+= marvell10g.o
- obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
-+obj-$(CONFIG_MEDIATEK_GE_PHY)	+= mediatek-ge.o
- obj-$(CONFIG_MESON_GXL_PHY)	+= meson-gxl.o
- obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
- obj-$(CONFIG_MICREL_PHY)	+= micrel.o
---- /dev/null
-+++ b/drivers/net/phy/mediatek-ge.c
-@@ -0,0 +1,113 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+#include <linux/bitfield.h>
-+#include <linux/module.h>
-+#include <linux/phy.h>
-+
-+#define MTK_T10_TEST_CONTROL		0x145
-+#define MTK_PHY_TP_MASK			GENMASK(4, 3)
-+#define MTK_PHY_TP_AUTO			0
-+#define MTK_PHY_TP_MDI			2
-+#define MTK_PHY_TP_MDIX			3
-+
-+#define MTK_EXT_PAGE_ACCESS		0x1f
-+#define MTK_PHY_PAGE_STANDARD		0x0000
-+#define MTK_PHY_PAGE_EXTENDED		0x0001
-+#define MTK_PHY_PAGE_EXTENDED_2		0x0002
-+#define MTK_PHY_PAGE_EXTENDED_3		0x0003
-+#define MTK_PHY_PAGE_EXTENDED_2A30	0x2a30
-+#define MTK_PHY_PAGE_EXTENDED_52B5	0x52b5
-+
-+static int mtk_gephy_read_page(struct phy_device *phydev)
-+{
-+	return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
-+}
-+
-+static int mtk_gephy_write_page(struct phy_device *phydev, int page)
-+{
-+	return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
-+}
-+
-+static void mtk_gephy_config_init(struct phy_device *phydev)
-+{
-+	/* Disable EEE */
-+	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
-+
-+	/* Enable HW auto downshift */
-+	phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));
-+
-+	/* Increase SlvDPSready time */
-+	phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
-+	__phy_write(phydev, 0x10, 0xafae);
-+	__phy_write(phydev, 0x12, 0x2f);
-+	__phy_write(phydev, 0x10, 0x8fae);
-+	phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+
-+	/* Adjust 100_mse_threshold */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff);
-+
-+	/* Disable mcc */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300);
-+}
-+
-+static int mt7530_phy_config_init(struct phy_device *phydev)
-+{
-+	mtk_gephy_config_init(phydev);
-+
-+	/* Increase post_update_timer */
-+	phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3, 0x11, 0x4b);
-+
-+	return 0;
-+}
-+
-+static int mt7531_phy_config_init(struct phy_device *phydev)
-+{
-+	mtk_gephy_config_init(phydev);
-+
-+	/* PHY link down power saving enable */
-+	phy_set_bits(phydev, 0x17, BIT(4));
-+	phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 0xc6, 0x300);
-+
-+	/* Set TX Pair delay selection */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404);
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404);
-+
-+	return 0;
-+}
-+
-+static struct phy_driver mtk_gephy_driver[] = {
-+	{
-+		PHY_ID_MATCH_EXACT(0x03a29412),
-+		.name		= "MediaTek MT7530 PHY",
-+		.config_init	= mt7530_phy_config_init,
-+		/* Interrupts are handled by the switch, not the PHY
-+		 * itself.
-+		 */
-+		.config_intr	= genphy_no_config_intr,
-+		.ack_interrupt  = genphy_no_ack_interrupt,
-+		.suspend	= genphy_suspend,
-+		.resume		= genphy_resume,
-+		.read_page	= mtk_gephy_read_page,
-+		.write_page	= mtk_gephy_write_page,
-+	},
-+	{
-+		PHY_ID_MATCH_EXACT(0x03a29441),
-+		.name		= "MediaTek MT7531 PHY",
-+		.config_init	= mt7531_phy_config_init,
-+		/* Interrupts are handled by the switch, not the PHY
-+		 * itself.
-+		 */
-+		.config_intr	= genphy_no_config_intr,
-+		.ack_interrupt  = genphy_no_ack_interrupt,
-+		.suspend	= genphy_suspend,
-+		.resume		= genphy_resume,
-+		.read_page	= mtk_gephy_read_page,
-+		.write_page	= mtk_gephy_write_page,
-+	},
-+};
-+
-+module_phy_driver(mtk_gephy_driver);
-+
-+static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = {
-+	{ PHY_ID_MATCH_VENDOR(0x03a29400) },
-+	{ }
-+};
diff --git a/target/linux/generic/backport-5.10/772-v5.14-net-dsa-mt7530-add-interrupt-support.patch b/target/linux/generic/backport-5.10/772-v5.14-net-dsa-mt7530-add-interrupt-support.patch
deleted file mode 100644
index c7e3a4ceb449..000000000000
--- a/target/linux/generic/backport-5.10/772-v5.14-net-dsa-mt7530-add-interrupt-support.patch
+++ /dev/null
@@ -1,425 +0,0 @@
-From ba751e28d44255744a30190faad0ca09b455c44d Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Wed, 19 May 2021 11:32:00 +0800
-Subject: [PATCH] net: dsa: mt7530: add interrupt support
-
-Add support for MT7530 interrupt controller to handle internal PHYs.
-In order to assign an IRQ number to each PHY, the registration of MDIO bus
-is also done in this driver.
-
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 264 +++++++++++++++++++++++++++++++++++----
- drivers/net/dsa/mt7530.h |  20 ++-
- 2 files changed, 256 insertions(+), 28 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -10,6 +10,7 @@
- #include <linux/mfd/syscon.h>
- #include <linux/module.h>
- #include <linux/netdevice.h>
-+#include <linux/of_irq.h>
- #include <linux/of_mdio.h>
- #include <linux/of_net.h>
- #include <linux/of_platform.h>
-@@ -603,18 +604,14 @@ mt7530_mib_reset(struct dsa_switch *ds)
- 	mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
- }
- 
--static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum)
-+static int mt7530_phy_read(struct mt7530_priv *priv, int port, int regnum)
- {
--	struct mt7530_priv *priv = ds->priv;
--
- 	return mdiobus_read_nested(priv->bus, port, regnum);
- }
- 
--static int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum,
-+static int mt7530_phy_write(struct mt7530_priv *priv, int port, int regnum,
- 			    u16 val)
- {
--	struct mt7530_priv *priv = ds->priv;
--
- 	return mdiobus_write_nested(priv->bus, port, regnum, val);
- }
- 
-@@ -792,9 +789,8 @@ out:
- }
- 
- static int
--mt7531_ind_phy_read(struct dsa_switch *ds, int port, int regnum)
-+mt7531_ind_phy_read(struct mt7530_priv *priv, int port, int regnum)
- {
--	struct mt7530_priv *priv = ds->priv;
- 	int devad;
- 	int ret;
- 
-@@ -810,10 +806,9 @@ mt7531_ind_phy_read(struct dsa_switch *d
- }
- 
- static int
--mt7531_ind_phy_write(struct dsa_switch *ds, int port, int regnum,
-+mt7531_ind_phy_write(struct mt7530_priv *priv, int port, int regnum,
- 		     u16 data)
- {
--	struct mt7530_priv *priv = ds->priv;
- 	int devad;
- 	int ret;
- 
-@@ -829,6 +824,22 @@ mt7531_ind_phy_write(struct dsa_switch *
- 	return ret;
- }
- 
-+static int
-+mt753x_phy_read(struct mii_bus *bus, int port, int regnum)
-+{
-+	struct mt7530_priv *priv = bus->priv;
-+
-+	return priv->info->phy_read(priv, port, regnum);
-+}
-+
-+static int
-+mt753x_phy_write(struct mii_bus *bus, int port, int regnum, u16 val)
-+{
-+	struct mt7530_priv *priv = bus->priv;
-+
-+	return priv->info->phy_write(priv, port, regnum, val);
-+}
-+
- static void
- mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset,
- 		   uint8_t *data)
-@@ -1796,6 +1807,210 @@ mt7530_setup_gpio(struct mt7530_priv *pr
- 	return devm_gpiochip_add_data(dev, gc, priv);
- }
- 
-+static irqreturn_t
-+mt7530_irq_thread_fn(int irq, void *dev_id)
-+{
-+	struct mt7530_priv *priv = dev_id;
-+	bool handled = false;
-+	u32 val;
-+	int p;
-+
-+	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	val = mt7530_mii_read(priv, MT7530_SYS_INT_STS);
-+	mt7530_mii_write(priv, MT7530_SYS_INT_STS, val);
-+	mutex_unlock(&priv->bus->mdio_lock);
-+
-+	for (p = 0; p < MT7530_NUM_PHYS; p++) {
-+		if (BIT(p) & val) {
-+			unsigned int irq;
-+
-+			irq = irq_find_mapping(priv->irq_domain, p);
-+			handle_nested_irq(irq);
-+			handled = true;
-+		}
-+	}
-+
-+	return IRQ_RETVAL(handled);
-+}
-+
-+static void
-+mt7530_irq_mask(struct irq_data *d)
-+{
-+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
-+
-+	priv->irq_enable &= ~BIT(d->hwirq);
-+}
-+
-+static void
-+mt7530_irq_unmask(struct irq_data *d)
-+{
-+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
-+
-+	priv->irq_enable |= BIT(d->hwirq);
-+}
-+
-+static void
-+mt7530_irq_bus_lock(struct irq_data *d)
-+{
-+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
-+
-+	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+}
-+
-+static void
-+mt7530_irq_bus_sync_unlock(struct irq_data *d)
-+{
-+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
-+
-+	mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
-+	mutex_unlock(&priv->bus->mdio_lock);
-+}
-+
-+static struct irq_chip mt7530_irq_chip = {
-+	.name = KBUILD_MODNAME,
-+	.irq_mask = mt7530_irq_mask,
-+	.irq_unmask = mt7530_irq_unmask,
-+	.irq_bus_lock = mt7530_irq_bus_lock,
-+	.irq_bus_sync_unlock = mt7530_irq_bus_sync_unlock,
-+};
-+
-+static int
-+mt7530_irq_map(struct irq_domain *domain, unsigned int irq,
-+	       irq_hw_number_t hwirq)
-+{
-+	irq_set_chip_data(irq, domain->host_data);
-+	irq_set_chip_and_handler(irq, &mt7530_irq_chip, handle_simple_irq);
-+	irq_set_nested_thread(irq, true);
-+	irq_set_noprobe(irq);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops mt7530_irq_domain_ops = {
-+	.map = mt7530_irq_map,
-+	.xlate = irq_domain_xlate_onecell,
-+};
-+
-+static void
-+mt7530_setup_mdio_irq(struct mt7530_priv *priv)
-+{
-+	struct dsa_switch *ds = priv->ds;
-+	int p;
-+
-+	for (p = 0; p < MT7530_NUM_PHYS; p++) {
-+		if (BIT(p) & ds->phys_mii_mask) {
-+			unsigned int irq;
-+
-+			irq = irq_create_mapping(priv->irq_domain, p);
-+			ds->slave_mii_bus->irq[p] = irq;
-+		}
-+	}
-+}
-+
-+static int
-+mt7530_setup_irq(struct mt7530_priv *priv)
-+{
-+	struct device *dev = priv->dev;
-+	struct device_node *np = dev->of_node;
-+	int ret;
-+
-+	if (!of_property_read_bool(np, "interrupt-controller")) {
-+		dev_info(dev, "no interrupt support\n");
-+		return 0;
-+	}
-+
-+	priv->irq = of_irq_get(np, 0);
-+	if (priv->irq <= 0) {
-+		dev_err(dev, "failed to get parent IRQ: %d\n", priv->irq);
-+		return priv->irq ? : -EINVAL;
-+	}
-+
-+	priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
-+						 &mt7530_irq_domain_ops, priv);
-+	if (!priv->irq_domain) {
-+		dev_err(dev, "failed to create IRQ domain\n");
-+		return -ENOMEM;
-+	}
-+
-+	/* This register must be set for MT7530 to properly fire interrupts */
-+	if (priv->id != ID_MT7531)
-+		mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL);
-+
-+	ret = request_threaded_irq(priv->irq, NULL, mt7530_irq_thread_fn,
-+				   IRQF_ONESHOT, KBUILD_MODNAME, priv);
-+	if (ret) {
-+		irq_domain_remove(priv->irq_domain);
-+		dev_err(dev, "failed to request IRQ: %d\n", ret);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static void
-+mt7530_free_mdio_irq(struct mt7530_priv *priv)
-+{
-+	int p;
-+
-+	for (p = 0; p < MT7530_NUM_PHYS; p++) {
-+		if (BIT(p) & priv->ds->phys_mii_mask) {
-+			unsigned int irq;
-+
-+			irq = irq_find_mapping(priv->irq_domain, p);
-+			irq_dispose_mapping(irq);
-+		}
-+	}
-+}
-+
-+static void
-+mt7530_free_irq_common(struct mt7530_priv *priv)
-+{
-+	free_irq(priv->irq, priv);
-+	irq_domain_remove(priv->irq_domain);
-+}
-+
-+static void
-+mt7530_free_irq(struct mt7530_priv *priv)
-+{
-+	mt7530_free_mdio_irq(priv);
-+	mt7530_free_irq_common(priv);
-+}
-+
-+static int
-+mt7530_setup_mdio(struct mt7530_priv *priv)
-+{
-+	struct dsa_switch *ds = priv->ds;
-+	struct device *dev = priv->dev;
-+	struct mii_bus *bus;
-+	static int idx;
-+	int ret;
-+
-+	bus = devm_mdiobus_alloc(dev);
-+	if (!bus)
-+		return -ENOMEM;
-+
-+	ds->slave_mii_bus = bus;
-+	bus->priv = priv;
-+	bus->name = KBUILD_MODNAME "-mii";
-+	snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++);
-+	bus->read = mt753x_phy_read;
-+	bus->write = mt753x_phy_write;
-+	bus->parent = dev;
-+	bus->phy_mask = ~ds->phys_mii_mask;
-+
-+	if (priv->irq)
-+		mt7530_setup_mdio_irq(priv);
-+
-+	ret = devm_mdiobus_register(dev, bus);
-+	if (ret) {
-+		dev_err(dev, "failed to register MDIO bus: %d\n", ret);
-+		if (priv->irq)
-+			mt7530_free_mdio_irq(priv);
-+	}
-+
-+	return ret;
-+}
-+
- static int
- mt7530_setup(struct dsa_switch *ds)
- {
-@@ -2747,24 +2962,20 @@ static int
- mt753x_setup(struct dsa_switch *ds)
- {
- 	struct mt7530_priv *priv = ds->priv;
-+	int ret = priv->info->sw_setup(ds);
- 
--	return priv->info->sw_setup(ds);
--}
--
--static int
--mt753x_phy_read(struct dsa_switch *ds, int port, int regnum)
--{
--	struct mt7530_priv *priv = ds->priv;
-+	if (ret)
-+		return ret;
- 
--	return priv->info->phy_read(ds, port, regnum);
--}
-+	ret = mt7530_setup_irq(priv);
-+	if (ret)
-+		return ret;
- 
--static int
--mt753x_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
--{
--	struct mt7530_priv *priv = ds->priv;
-+	ret = mt7530_setup_mdio(priv);
-+	if (ret && priv->irq)
-+		mt7530_free_irq_common(priv);
- 
--	return priv->info->phy_write(ds, port, regnum, val);
-+	return ret;
- }
- 
- static int mt753x_get_mac_eee(struct dsa_switch *ds, int port,
-@@ -2801,8 +3012,6 @@ static const struct dsa_switch_ops mt753
- 	.get_tag_protocol	= mtk_get_tag_protocol,
- 	.setup			= mt753x_setup,
- 	.get_strings		= mt7530_get_strings,
--	.phy_read		= mt753x_phy_read,
--	.phy_write		= mt753x_phy_write,
- 	.get_ethtool_stats	= mt7530_get_ethtool_stats,
- 	.get_sset_count		= mt7530_get_sset_count,
- 	.set_ageing_time	= mt7530_set_ageing_time,
-@@ -2985,6 +3194,9 @@ mt7530_remove(struct mdio_device *mdiode
- 		dev_err(priv->dev, "Failed to disable io pwr: %d\n",
- 			ret);
- 
-+	if (priv->irq)
-+		mt7530_free_irq(priv);
-+
- 	dsa_unregister_switch(priv->ds);
- 	mutex_destroy(&priv->reg_mutex);
- }
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -7,6 +7,7 @@
- #define __MT7530_H
- 
- #define MT7530_NUM_PORTS		7
-+#define MT7530_NUM_PHYS			5
- #define MT7530_CPU_PORT			6
- #define MT7530_NUM_FDB_RECORDS		2048
- #define MT7530_ALL_MEMBERS		0xff
-@@ -392,6 +393,12 @@ enum mt7531_sgmii_force_duplex {
- #define  SYS_CTRL_SW_RST		BIT(1)
- #define  SYS_CTRL_REG_RST		BIT(0)
- 
-+/* Register for system interrupt */
-+#define MT7530_SYS_INT_EN		0x7008
-+
-+/* Register for system interrupt status */
-+#define MT7530_SYS_INT_STS		0x700c
-+
- /* Register for PHY Indirect Access Control */
- #define MT7531_PHY_IAC			0x701C
- #define  MT7531_PHY_ACS_ST		BIT(31)
-@@ -713,6 +720,8 @@ static const char *p5_intf_modes(unsigne
- 	}
- }
- 
-+struct mt7530_priv;
-+
- /* struct mt753x_info -	This is the main data structure for holding the specific
-  *			part for each supported device
-  * @sw_setup:		Holding the handler to a device initialization
-@@ -737,8 +746,8 @@ struct mt753x_info {
- 	enum mt753x_id id;
- 
- 	int (*sw_setup)(struct dsa_switch *ds);
--	int (*phy_read)(struct dsa_switch *ds, int port, int regnum);
--	int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val);
-+	int (*phy_read)(struct mt7530_priv *priv, int port, int regnum);
-+	int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
- 	int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
- 	int (*cpu_port_config)(struct dsa_switch *ds, int port);
- 	bool (*phy_mode_supported)(struct dsa_switch *ds, int port,
-@@ -772,6 +781,10 @@ struct mt753x_info {
-  *			registers
-  * @p6_interface	Holding the current port 6 interface
-  * @p5_intf_sel:	Holding the current port 5 interface select
-+ *
-+ * @irq:		IRQ number of the switch
-+ * @irq_domain:		IRQ domain of the switch irq_chip
-+ * @irq_enable:		IRQ enable bits, synced to SYS_INT_EN
-  */
- struct mt7530_priv {
- 	struct device		*dev;
-@@ -793,6 +806,9 @@ struct mt7530_priv {
- 	struct mt7530_port	ports[MT7530_NUM_PORTS];
- 	/* protect among processes for registers access*/
- 	struct mutex reg_mutex;
-+	int irq;
-+	struct irq_domain *irq_domain;
-+	u32 irq_enable;
- };
- 
- struct mt7530_hw_vlan_entry {
diff --git a/target/linux/generic/backport-5.10/773-v5.18-1-net-dsa-Move-VLAN-filtering-syncing-out-of-dsa_switc.patch b/target/linux/generic/backport-5.10/773-v5.18-1-net-dsa-Move-VLAN-filtering-syncing-out-of-dsa_switc.patch
deleted file mode 100644
index eb60134a1e9b..000000000000
--- a/target/linux/generic/backport-5.10/773-v5.18-1-net-dsa-Move-VLAN-filtering-syncing-out-of-dsa_switc.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 7164a8cde4b42f76474088ccaf53f1e463d4e2f6 Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Mon, 24 Jan 2022 22:09:43 +0100
-Subject: [PATCH 5.10 1/2] net: dsa: Move VLAN filtering syncing out of
- dsa_switch_bridge_leave
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-commit 381a730182f1d174e1950cd4e63e885b1c302051 upstream.
-
-Most of dsa_switch_bridge_leave was, in fact, dealing with the syncing
-of VLAN filtering for switches on which that is a global
-setting. Separate the two phases to prepare for the cross-chip related
-bugfix in the following commit.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- net/dsa/switch.c | 39 ++++++++++++++++++++++++++-------------
- 1 file changed, 26 insertions(+), 13 deletions(-)
-
---- a/net/dsa/switch.c
-+++ b/net/dsa/switch.c
-@@ -104,23 +104,12 @@ static int dsa_switch_bridge_join(struct
- 	return 0;
- }
- 
--static int dsa_switch_bridge_leave(struct dsa_switch *ds,
--				   struct dsa_notifier_bridge_info *info)
-+static int dsa_switch_sync_vlan_filtering(struct dsa_switch *ds,
-+					  struct dsa_notifier_bridge_info *info)
- {
- 	bool unset_vlan_filtering = br_vlan_enabled(info->br);
--	struct dsa_switch_tree *dst = ds->dst;
- 	int err, i;
- 
--	if (dst->index == info->tree_index && ds->index == info->sw_index &&
--	    ds->ops->port_bridge_leave)
--		ds->ops->port_bridge_leave(ds, info->port, info->br);
--
--	if ((dst->index != info->tree_index || ds->index != info->sw_index) &&
--	    ds->ops->crosschip_bridge_leave)
--		ds->ops->crosschip_bridge_leave(ds, info->tree_index,
--						info->sw_index, info->port,
--						info->br);
--
- 	/* If the bridge was vlan_filtering, the bridge core doesn't trigger an
- 	 * event for changing vlan_filtering setting upon slave ports leaving
- 	 * it. That is a good thing, because that lets us handle it and also
-@@ -153,6 +142,30 @@ static int dsa_switch_bridge_leave(struc
- 		if (err && err != EOPNOTSUPP)
- 			return err;
- 	}
-+
-+	return 0;
-+}
-+
-+static int dsa_switch_bridge_leave(struct dsa_switch *ds,
-+				   struct dsa_notifier_bridge_info *info)
-+{
-+	struct dsa_switch_tree *dst = ds->dst;
-+	int err;
-+
-+	if (dst->index == info->tree_index && ds->index == info->sw_index &&
-+	    ds->ops->port_bridge_leave)
-+		ds->ops->port_bridge_leave(ds, info->port, info->br);
-+
-+	if ((dst->index != info->tree_index || ds->index != info->sw_index) &&
-+	    ds->ops->crosschip_bridge_leave)
-+		ds->ops->crosschip_bridge_leave(ds, info->tree_index,
-+						info->sw_index, info->port,
-+						info->br);
-+
-+	err = dsa_switch_sync_vlan_filtering(ds, info);
-+	if (err)
-+		return err;
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/backport-5.10/773-v5.18-2-net-dsa-Avoid-cross-chip-syncing-of-VLAN-filtering.patch b/target/linux/generic/backport-5.10/773-v5.18-2-net-dsa-Avoid-cross-chip-syncing-of-VLAN-filtering.patch
deleted file mode 100644
index 0b36ef7cec25..000000000000
--- a/target/linux/generic/backport-5.10/773-v5.18-2-net-dsa-Avoid-cross-chip-syncing-of-VLAN-filtering.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 6948a6654ffc878fc0258b363da77e7fd775b2d9 Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Mon, 24 Jan 2022 22:09:44 +0100
-Subject: [PATCH 5.10 2/2] net: dsa: Avoid cross-chip syncing of VLAN filtering
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-commit 108dc8741c203e9d6ce4e973367f1bac20c7192b upstream.
-
-Changes to VLAN filtering are not applicable to cross-chip
-notifications.
-
-On a system like this:
-
-.-----.   .-----.   .-----.
-| sw1 +---+ sw2 +---+ sw3 |
-'-1-2-'   '-1-2-'   '-1-2-'
-
-Before this change, upon sw1p1 leaving a bridge, a call to
-dsa_port_vlan_filtering would also be made to sw2p1 and sw3p1.
-
-In this scenario:
-
-.---------.   .-----.   .-----.
-|   sw1   +---+ sw2 +---+ sw3 |
-'-1-2-3-4-'   '-1-2-'   '-1-2-'
-
-When sw1p4 would leave a bridge, dsa_port_vlan_filtering would be
-called for sw2 and sw3 with a non-existing port - leading to array
-out-of-bounds accesses and crashes on mv88e6xxx.
-
-Fixes: d371b7c92d19 ("net: dsa: Unset vlan_filtering when ports leave the bridge")
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- net/dsa/switch.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/net/dsa/switch.c
-+++ b/net/dsa/switch.c
-@@ -162,9 +162,11 @@ static int dsa_switch_bridge_leave(struc
- 						info->sw_index, info->port,
- 						info->br);
- 
--	err = dsa_switch_sync_vlan_filtering(ds, info);
--	if (err)
--		return err;
-+	if (dst->index == info->tree_index && ds->index == info->sw_index) {
-+		err = dsa_switch_sync_vlan_filtering(ds, info);
-+		if (err)
-+			return err;
-+	}
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-5.10/774-v5.15-net-dsa-mv88e6xxx-keep-the-pvid-at-0-when-VLAN-unawa.patch b/target/linux/generic/backport-5.10/774-v5.15-net-dsa-mv88e6xxx-keep-the-pvid-at-0-when-VLAN-unawa.patch
deleted file mode 100644
index 13cc8f3d6969..000000000000
--- a/target/linux/generic/backport-5.10/774-v5.15-net-dsa-mv88e6xxx-keep-the-pvid-at-0-when-VLAN-unawa.patch
+++ /dev/null
@@ -1,225 +0,0 @@
-From 675992be6f7b603b8cfda4678f173e1021fc1ab6 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Thu, 7 Oct 2021 19:47:10 +0300
-Subject: [PATCH] net: dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware
-
-The VLAN support in mv88e6xxx has a loaded history. Commit 2ea7a679ca2a
-("net: dsa: Don't add vlans when vlan filtering is disabled") noticed
-some issues with VLAN and decided the best way to deal with them was to
-make the DSA core ignore VLANs added by the bridge while VLAN awareness
-is turned off. Those issues were never explained, just presented as
-"at least one corner case".
-
-That approach had problems of its own, presented by
-commit 54a0ed0df496 ("net: dsa: provide an option for drivers to always
-receive bridge VLANs") for the DSA core, followed by
-commit 1fb74191988f ("net: dsa: mv88e6xxx: fix vlan setup") which
-applied ds->configure_vlan_while_not_filtering = true for mv88e6xxx in
-particular.
-
-We still don't know what corner case Andrew saw when he wrote
-commit 2ea7a679ca2a ("net: dsa: Don't add vlans when vlan filtering is
-disabled"), but Tobias now reports that when we use TX forwarding
-offload, pinging an external station from the bridge device is broken if
-the front-facing DSA user port has flooding turned off. The full
-description is in the link below, but for short, when a mv88e6xxx port
-is under a VLAN-unaware bridge, it inherits that bridge's pvid.
-So packets ingressing a user port will be classified to e.g. VID 1
-(assuming that value for the bridge_default_pvid), whereas when
-tag_dsa.c xmits towards a user port, it always sends packets using a VID
-of 0 if that port is standalone or under a VLAN-unaware bridge - or at
-least it did so prior to commit d82f8ab0d874 ("net: dsa: tag_dsa:
-offload the bridge forwarding process").
-
-In any case, when there is a conversation between the CPU and a station
-connected to a user port, the station's MAC address is learned in VID 1
-but the CPU tries to transmit through VID 0. The packets reach the
-intended station, but via flooding and not by virtue of matching the
-existing ATU entry.
-
-DSA has established (and enforced in other drivers: sja1105, felix,
-mt7530) that a VLAN-unaware port should use a private pvid, and not
-inherit the one from the bridge. The bridge's pvid should only be
-inherited when that bridge is VLAN-aware, so all state transitions need
-to be handled. On the other hand, all bridge VLANs should sit in the VTU
-starting with the moment when the bridge offloads them via switchdev,
-they are just not used.
-
-This solves the problem that Tobias sees because packets ingressing on
-VLAN-unaware user ports now get classified to VID 0, which is also the
-VID used by tag_dsa.c on xmit.
-
-Fixes: d82f8ab0d874 ("net: dsa: tag_dsa: offload the bridge forwarding process")
-Link: https://patchwork.kernel.org/project/netdevbpf/patch/20211003222312.284175-2-vladimir.oltean@nxp.com/#24491503
-Reported-by: Tobias Waldekranz <tobias@waldekranz.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mv88e6xxx/chip.c | 56 +++++++++++++++++++++++++++++---
- drivers/net/dsa/mv88e6xxx/chip.h |  6 ++++
- drivers/net/dsa/mv88e6xxx/port.c | 21 ++++++++++++
- drivers/net/dsa/mv88e6xxx/port.h |  2 ++
- 4 files changed, 81 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -1590,6 +1590,26 @@ static int mv88e6xxx_port_check_hw_vlan(
- 	return 0;
- }
- 
-+static int mv88e6xxx_port_commit_pvid(struct mv88e6xxx_chip *chip, int port)
-+{
-+	struct dsa_port *dp = dsa_to_port(chip->ds, port);
-+	struct mv88e6xxx_port *p = &chip->ports[port];
-+	bool drop_untagged = false;
-+	u16 pvid = 0;
-+	int err;
-+
-+	if (dp->bridge_dev && br_vlan_enabled(dp->bridge_dev)) {
-+		pvid = p->bridge_pvid.vid;
-+		drop_untagged = !p->bridge_pvid.valid;
-+	}
-+
-+	err = mv88e6xxx_port_set_pvid(chip, port, pvid);
-+	if (err)
-+		return err;
-+
-+	return mv88e6xxx_port_drop_untagged(chip, port, drop_untagged);
-+}
-+
- static int mv88e6xxx_port_vlan_filtering(struct dsa_switch *ds, int port,
- 					 bool vlan_filtering,
- 					 struct switchdev_trans *trans)
-@@ -1603,7 +1623,16 @@ static int mv88e6xxx_port_vlan_filtering
- 		return chip->info->max_vid ? 0 : -EOPNOTSUPP;
- 
- 	mv88e6xxx_reg_lock(chip);
-+
- 	err = mv88e6xxx_port_set_8021q_mode(chip, port, mode);
-+	if (err)
-+		goto unlock;
-+
-+	err = mv88e6xxx_port_commit_pvid(chip, port);
-+	if (err)
-+		goto unlock;
-+
-+unlock:
- 	mv88e6xxx_reg_unlock(chip);
- 
- 	return err;
-@@ -1986,8 +2015,10 @@ static void mv88e6xxx_port_vlan_add(stru
- 	struct mv88e6xxx_chip *chip = ds->priv;
- 	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
- 	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
-+	struct mv88e6xxx_port *p = &chip->ports[port];
- 	bool warn;
- 	u8 member;
-+	int err;
- 	u16 vid;
- 
- 	if (!chip->info->max_vid)
-@@ -2012,9 +2043,23 @@ static void mv88e6xxx_port_vlan_add(stru
- 			dev_err(ds->dev, "p%d: failed to add VLAN %d%c\n", port,
- 				vid, untagged ? 'u' : 't');
- 
--	if (pvid && mv88e6xxx_port_set_pvid(chip, port, vlan->vid_end))
--		dev_err(ds->dev, "p%d: failed to set PVID %d\n", port,
--			vlan->vid_end);
-+	if (pvid) {
-+		p->bridge_pvid.vid = vlan->vid_end;
-+		p->bridge_pvid.valid = true;
-+
-+		err = mv88e6xxx_port_commit_pvid(chip, port);
-+		if (err)
-+			dev_err(ds->dev, "p%d: failed to set PVID %d", port,
-+				vlan->vid_end);
-+	} else if (vlan->vid_end && p->bridge_pvid.vid == vlan->vid_end) {
-+		/* The old pvid was reinstalled as a non-pvid VLAN */
-+		p->bridge_pvid.valid = false;
-+
-+		err = mv88e6xxx_port_commit_pvid(chip, port);
-+		if (err)
-+			dev_err(ds->dev, "p%d: failed to unset PVID %d", port,
-+				vlan->vid_end);
-+	}
- 
- 	mv88e6xxx_reg_unlock(chip);
- }
-@@ -2065,6 +2110,7 @@ static int mv88e6xxx_port_vlan_del(struc
- 				   const struct switchdev_obj_port_vlan *vlan)
- {
- 	struct mv88e6xxx_chip *chip = ds->priv;
-+	struct mv88e6xxx_port *p = &chip->ports[port];
- 	u16 pvid, vid;
- 	int err = 0;
- 
-@@ -2083,7 +2129,9 @@ static int mv88e6xxx_port_vlan_del(struc
- 			goto unlock;
- 
- 		if (vid == pvid) {
--			err = mv88e6xxx_port_set_pvid(chip, port, 0);
-+			p->bridge_pvid.valid = false;
-+
-+			err = mv88e6xxx_port_commit_pvid(chip, port);
- 			if (err)
- 				goto unlock;
- 		}
---- a/drivers/net/dsa/mv88e6xxx/chip.h
-+++ b/drivers/net/dsa/mv88e6xxx/chip.h
-@@ -224,9 +224,15 @@ struct mv88e6xxx_policy {
- 	u16 vid;
- };
- 
-+struct mv88e6xxx_vlan {
-+	u16	vid;
-+	bool	valid;
-+};
-+
- struct mv88e6xxx_port {
- 	struct mv88e6xxx_chip *chip;
- 	int port;
-+	struct mv88e6xxx_vlan bridge_pvid;
- 	u64 serdes_stats[2];
- 	u64 atu_member_violation;
- 	u64 atu_miss_violation;
---- a/drivers/net/dsa/mv88e6xxx/port.c
-+++ b/drivers/net/dsa/mv88e6xxx/port.c
-@@ -1062,6 +1062,27 @@ int mv88e6xxx_port_set_8021q_mode(struct
- 	return 0;
- }
- 
-+int mv88e6xxx_port_drop_untagged(struct mv88e6xxx_chip *chip, int port,
-+				 bool drop_untagged)
-+{
-+	u16 old, new;
-+	int err;
-+
-+	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_CTL2, &old);
-+	if (err)
-+		return err;
-+
-+	if (drop_untagged)
-+		new = old | MV88E6XXX_PORT_CTL2_DISCARD_UNTAGGED;
-+	else
-+		new = old & ~MV88E6XXX_PORT_CTL2_DISCARD_UNTAGGED;
-+
-+	if (new == old)
-+		return 0;
-+
-+	return mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_CTL2, new);
-+}
-+
- int mv88e6xxx_port_set_map_da(struct mv88e6xxx_chip *chip, int port)
- {
- 	u16 reg;
---- a/drivers/net/dsa/mv88e6xxx/port.h
-+++ b/drivers/net/dsa/mv88e6xxx/port.h
-@@ -364,6 +364,8 @@ int mv88e6390x_port_set_cmode(struct mv8
- 			      phy_interface_t mode);
- int mv88e6185_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode);
- int mv88e6352_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode);
-+int mv88e6xxx_port_drop_untagged(struct mv88e6xxx_chip *chip, int port,
-+				 bool drop_untagged);
- int mv88e6xxx_port_set_map_da(struct mv88e6xxx_chip *chip, int port);
- int mv88e6095_port_set_upstream_port(struct mv88e6xxx_chip *chip, int port,
- 				     int upstream_port);
diff --git a/target/linux/generic/backport-5.10/775-v5.18-01-net-phy-at803x-move-page-selection-fix-to-config_init.patch b/target/linux/generic/backport-5.10/775-v5.18-01-net-phy-at803x-move-page-selection-fix-to-config_init.patch
deleted file mode 100644
index 5d1246893b13..000000000000
--- a/target/linux/generic/backport-5.10/775-v5.18-01-net-phy-at803x-move-page-selection-fix-to-config_init.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 4f3a00c7f5b2cfe4e127fd3fe49b55e1b318c01f Mon Sep 17 00:00:00 2001
-From: Robert Hancock <robert.hancock@calian.com>
-Date: Tue, 25 Jan 2022 10:54:08 -0600
-Subject: [PATCH] net: phy: at803x: move page selection fix to config_init
-
-The fix to select the copper page on AR8031 was being done in the probe
-function rather than config_init, so it would not be redone after resume
-from suspend. Move this to config_init so it is always redone when
-needed.
-
-Fixes: c329e5afb42f ("net: phy: at803x: select correct page on config init")
-Signed-off-by: Robert Hancock <robert.hancock@calian.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 40 ++++++++++++++++------------------------
- 1 file changed, 16 insertions(+), 24 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -651,25 +651,7 @@ static int at803x_probe(struct phy_devic
- 			return ret;
- 	}
- 
--	/* Some bootloaders leave the fiber page selected.
--	 * Switch to the copper page, as otherwise we read
--	 * the PHY capabilities from the fiber side.
--	 */
--	if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
--		phy_lock_mdio_bus(phydev);
--		ret = at803x_write_page(phydev, AT803X_PAGE_COPPER);
--		phy_unlock_mdio_bus(phydev);
--		if (ret)
--			goto err;
--	}
--
- 	return 0;
--
--err:
--	if (priv->vddio)
--		regulator_disable(priv->vddio);
--
--	return ret;
- }
- 
- static void at803x_remove(struct phy_device *phydev)
-@@ -745,6 +727,22 @@ static int at803x_config_init(struct phy
- {
- 	int ret;
- 
-+	if (phydev->drv->phy_id == ATH8031_PHY_ID) {
-+		/* Some bootloaders leave the fiber page selected.
-+		 * Switch to the copper page, as otherwise we read
-+		 * the PHY capabilities from the fiber side.
-+		 */
-+		phy_lock_mdio_bus(phydev);
-+		ret = at803x_write_page(phydev, AT803X_PAGE_COPPER);
-+		phy_unlock_mdio_bus(phydev);
-+		if (ret)
-+			return ret;
-+
-+		ret = at8031_pll_config(phydev);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
- 	/* The RX and TX delay default is:
- 	 *   after HW reset: RX delay enabled and TX delay disabled
- 	 *   after SW reset: RX delay enabled, while TX delay retains the
-@@ -770,12 +768,6 @@ static int at803x_config_init(struct phy
- 	if (ret < 0)
- 		return ret;
- 
--	if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
--		ret = at8031_pll_config(phydev);
--		if (ret < 0)
--			return ret;
--	}
--
- 	return 0;
- }
- 
diff --git a/target/linux/generic/backport-5.10/775-v5.18-02-net-phy-at803x-add-fiber-support.patch b/target/linux/generic/backport-5.10/775-v5.18-02-net-phy-at803x-add-fiber-support.patch
deleted file mode 100644
index 18526591f837..000000000000
--- a/target/linux/generic/backport-5.10/775-v5.18-02-net-phy-at803x-add-fiber-support.patch
+++ /dev/null
@@ -1,193 +0,0 @@
-From 3265f421887847db9ae2c01a00645e33608556d8 Mon Sep 17 00:00:00 2001
-From: Robert Hancock <robert.hancock@calian.com>
-Date: Tue, 25 Jan 2022 10:54:09 -0600
-Subject: [PATCH] net: phy: at803x: add fiber support
-
-Previously this driver always forced the copper page to be selected,
-however for AR8031 in 100Base-FX or 1000Base-X modes, the fiber page
-needs to be selected. Set the appropriate mode based on the hardware
-mode_cfg strap selection.
-
-Enable the appropriate interrupt bits to detect fiber-side link up
-or down events.
-
-Update config_aneg and read_status methods to use the appropriate
-Clause 37 calls when fiber mode is in use.
-
-Signed-off-by: Robert Hancock <robert.hancock@calian.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 76 +++++++++++++++++++++++++++++++++++-----
- 1 file changed, 67 insertions(+), 9 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -48,6 +48,8 @@
- #define AT803X_INTR_ENABLE_PAGE_RECEIVED	BIT(12)
- #define AT803X_INTR_ENABLE_LINK_FAIL		BIT(11)
- #define AT803X_INTR_ENABLE_LINK_SUCCESS		BIT(10)
-+#define AT803X_INTR_ENABLE_LINK_FAIL_BX		BIT(8)
-+#define AT803X_INTR_ENABLE_LINK_SUCCESS_BX	BIT(7)
- #define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE	BIT(5)
- #define AT803X_INTR_ENABLE_POLARITY_CHANGED	BIT(1)
- #define AT803X_INTR_ENABLE_WOL			BIT(0)
-@@ -82,6 +84,17 @@
- 
- #define AT803X_MODE_CFG_MASK			0x0F
- #define AT803X_MODE_CFG_SGMII			0x01
-+#define AT803X_MODE_CFG_BASET_RGMII		0x00
-+#define AT803X_MODE_CFG_BASET_SGMII		0x01
-+#define AT803X_MODE_CFG_BX1000_RGMII_50OHM	0x02
-+#define AT803X_MODE_CFG_BX1000_RGMII_75OHM	0x03
-+#define AT803X_MODE_CFG_BX1000_CONV_50OHM	0x04
-+#define AT803X_MODE_CFG_BX1000_CONV_75OHM	0x05
-+#define AT803X_MODE_CFG_FX100_RGMII_50OHM	0x06
-+#define AT803X_MODE_CFG_FX100_CONV_50OHM	0x07
-+#define AT803X_MODE_CFG_RGMII_AUTO_MDET		0x0B
-+#define AT803X_MODE_CFG_FX100_RGMII_75OHM	0x0E
-+#define AT803X_MODE_CFG_FX100_CONV_75OHM	0x0F
- 
- #define AT803X_PSSR			0x11	/*PHY-Specific Status Register*/
- #define AT803X_PSSR_MR_AN_COMPLETE	0x0200
-@@ -189,6 +202,8 @@ struct at803x_priv {
- #define AT803X_KEEP_PLL_ENABLED	BIT(0)	/* don't turn off internal PLL */
- 	u16 clk_25m_reg;
- 	u16 clk_25m_mask;
-+	bool is_fiber;
-+	bool is_1000basex;
- 	struct regulator_dev *vddio_rdev;
- 	struct regulator_dev *vddh_rdev;
- 	struct regulator *vddio;
-@@ -651,7 +666,33 @@ static int at803x_probe(struct phy_devic
- 			return ret;
- 	}
- 
-+	if (phydev->drv->phy_id == ATH8031_PHY_ID) {
-+		int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-+		int mode_cfg;
-+
-+		if (ccr < 0)
-+			goto err;
-+		mode_cfg = ccr & AT803X_MODE_CFG_MASK;
-+
-+		switch (mode_cfg) {
-+		case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
-+		case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
-+			priv->is_1000basex = true;
-+			fallthrough;
-+		case AT803X_MODE_CFG_FX100_RGMII_50OHM:
-+		case AT803X_MODE_CFG_FX100_RGMII_75OHM:
-+			priv->is_fiber = true;
-+			break;
-+		}
-+	}
-+
- 	return 0;
-+
-+err:
-+	if (priv->vddio)
-+		regulator_disable(priv->vddio);
-+
-+	return ret;
- }
- 
- static void at803x_remove(struct phy_device *phydev)
-@@ -664,6 +705,7 @@ static void at803x_remove(struct phy_dev
- 
- static int at803x_get_features(struct phy_device *phydev)
- {
-+	struct at803x_priv *priv = phydev->priv;
- 	int err;
- 
- 	err = genphy_read_abilities(phydev);
-@@ -681,12 +723,13 @@ static int at803x_get_features(struct ph
- 	 * As a result of that, ESTATUS_1000_XFULL is set
- 	 * to 1 even when operating in copper TP mode.
- 	 *
--	 * Remove this mode from the supported link modes,
--	 * as this driver currently only supports copper
--	 * operation.
-+	 * Remove this mode from the supported link modes
-+	 * when not operating in 1000BaseX mode.
- 	 */
--	linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
--			   phydev->supported);
-+	if (!priv->is_1000basex)
-+		linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
-+				   phydev->supported);
-+
- 	return 0;
- }
- 
-@@ -725,15 +768,18 @@ static int at8031_pll_config(struct phy_
- 
- static int at803x_config_init(struct phy_device *phydev)
- {
-+	struct at803x_priv *priv = phydev->priv;
- 	int ret;
- 
- 	if (phydev->drv->phy_id == ATH8031_PHY_ID) {
- 		/* Some bootloaders leave the fiber page selected.
--		 * Switch to the copper page, as otherwise we read
--		 * the PHY capabilities from the fiber side.
-+		 * Switch to the appropriate page (fiber or copper), as otherwise we
-+		 * read the PHY capabilities from the wrong page.
- 		 */
- 		phy_lock_mdio_bus(phydev);
--		ret = at803x_write_page(phydev, AT803X_PAGE_COPPER);
-+		ret = at803x_write_page(phydev,
-+					priv->is_fiber ? AT803X_PAGE_FIBER :
-+							 AT803X_PAGE_COPPER);
- 		phy_unlock_mdio_bus(phydev);
- 		if (ret)
- 			return ret;
-@@ -782,6 +828,7 @@ static int at803x_ack_interrupt(struct p
- 
- static int at803x_config_intr(struct phy_device *phydev)
- {
-+	struct at803x_priv *priv = phydev->priv;
- 	int err;
- 	int value;
- 
-@@ -793,6 +840,10 @@ static int at803x_config_intr(struct phy
- 		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
- 		value |= AT803X_INTR_ENABLE_LINK_FAIL;
- 		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
-+		if (priv->is_fiber) {
-+			value |= AT803X_INTR_ENABLE_LINK_FAIL_BX;
-+			value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX;
-+		}
- 
- 		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
- 	}
-@@ -859,8 +910,12 @@ static int at803x_aneg_done(struct phy_d
- 
- static int at803x_read_status(struct phy_device *phydev)
- {
-+	struct at803x_priv *priv = phydev->priv;
- 	int ss, err, old_link = phydev->link;
- 
-+	if (priv->is_1000basex)
-+		return genphy_c37_read_status(phydev);
-+
- 	/* Update the link, but return if there was an error */
- 	err = genphy_update_link(phydev);
- 	if (err)
-@@ -959,6 +1014,7 @@ static int at803x_config_mdix(struct phy
- 
- static int at803x_config_aneg(struct phy_device *phydev)
- {
-+	struct at803x_priv *priv = phydev->priv;
- 	int ret;
- 
- 	ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
-@@ -975,6 +1031,9 @@ static int at803x_config_aneg(struct phy
- 			return ret;
- 	}
- 
-+	if (priv->is_1000basex)
-+		return genphy_c37_config_aneg(phydev);
-+
- 	return genphy_config_aneg(phydev);
- }
- 
diff --git a/target/linux/generic/backport-5.10/775-v5.18-03-net-phy-at803x-support-downstream-SFP-cage.patch b/target/linux/generic/backport-5.10/775-v5.18-03-net-phy-at803x-support-downstream-SFP-cage.patch
deleted file mode 100644
index 73dea9c26526..000000000000
--- a/target/linux/generic/backport-5.10/775-v5.18-03-net-phy-at803x-support-downstream-SFP-cage.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From dc4d5fcc5d365c9f70ea3f5c09bdf70e988fad50 Mon Sep 17 00:00:00 2001
-From: Robert Hancock <robert.hancock@calian.com>
-Date: Tue, 25 Jan 2022 10:54:10 -0600
-Subject: [PATCH] net: phy: at803x: Support downstream SFP cage
-
-Add support for downstream SFP cages for AR8031 and AR8033. This is
-primarily intended for fiber modules or direct-attach cables, however
-copper modules which work in 1000Base-X mode may also function. Such
-modules are allowed with a warning.
-
-Signed-off-by: Robert Hancock <robert.hancock@calian.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 56 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 56 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -19,6 +19,8 @@
- #include <linux/regulator/of_regulator.h>
- #include <linux/regulator/driver.h>
- #include <linux/regulator/consumer.h>
-+#include <linux/phylink.h>
-+#include <linux/sfp.h>
- #include <dt-bindings/net/qca-ar803x.h>
- 
- #define AT803X_SPECIFIC_FUNCTION_CONTROL	0x10
-@@ -551,6 +553,55 @@ static bool at803x_match_phy_id(struct p
- 		== (phy_id & phydev->drv->phy_id_mask);
- }
- 
-+static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-+{
-+	struct phy_device *phydev = upstream;
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support);
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
-+	phy_interface_t iface;
-+
-+	linkmode_zero(phy_support);
-+	phylink_set(phy_support, 1000baseX_Full);
-+	phylink_set(phy_support, 1000baseT_Full);
-+	phylink_set(phy_support, Autoneg);
-+	phylink_set(phy_support, Pause);
-+	phylink_set(phy_support, Asym_Pause);
-+
-+	linkmode_zero(sfp_support);
-+	sfp_parse_support(phydev->sfp_bus, id, sfp_support);
-+	/* Some modules support 10G modes as well as others we support.
-+	 * Mask out non-supported modes so the correct interface is picked.
-+	 */
-+	linkmode_and(sfp_support, phy_support, sfp_support);
-+
-+	if (linkmode_empty(sfp_support)) {
-+		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
-+		return -EINVAL;
-+	}
-+
-+	iface = sfp_select_interface(phydev->sfp_bus, sfp_support);
-+
-+	/* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes
-+	 * interface for use with SFP modules.
-+	 * However, some copper modules detected as having a preferred SGMII
-+	 * interface do default to and function in 1000Base-X mode, so just
-+	 * print a warning and allow such modules, as they may have some chance
-+	 * of working.
-+	 */
-+	if (iface == PHY_INTERFACE_MODE_SGMII)
-+		dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n");
-+	else if (iface != PHY_INTERFACE_MODE_1000BASEX)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+static const struct sfp_upstream_ops at803x_sfp_ops = {
-+	.attach = phy_sfp_attach,
-+	.detach = phy_sfp_detach,
-+	.module_insert = at803x_sfp_insert,
-+};
-+
- static int at803x_parse_dt(struct phy_device *phydev)
- {
- 	struct device_node *node = phydev->mdio.dev.of_node;
-@@ -639,6 +690,11 @@ static int at803x_parse_dt(struct phy_de
- 			phydev_err(phydev, "failed to get VDDIO regulator\n");
- 			return PTR_ERR(priv->vddio);
- 		}
-+
-+		/* Only AR8031/8033 support 1000Base-X for SFP modules */
-+		ret = phy_sfp_probe(phydev, &at803x_sfp_ops);
-+		if (ret < 0)
-+			return ret;
- 	}
- 
- 	return 0;
diff --git a/target/linux/generic/backport-5.10/775-v5.18-04-net-phy-at803x-fix-NULL-pointer-dereference-on-AR9331-PHY.patch b/target/linux/generic/backport-5.10/775-v5.18-04-net-phy-at803x-fix-NULL-pointer-dereference-on-AR9331-PHY.patch
deleted file mode 100644
index 61fe3d259d0f..000000000000
--- a/target/linux/generic/backport-5.10/775-v5.18-04-net-phy-at803x-fix-NULL-pointer-dereference-on-AR9331-PHY.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 9926de7315be3d606cc011a305ad9adb9e8e14c9 Mon Sep 17 00:00:00 2001
-From: Oleksij Rempel <o.rempel@pengutronix.de>
-Date: Sat, 18 Jun 2022 14:23:33 +0200
-Subject: [PATCH] net: phy: at803x: fix NULL pointer dereference on AR9331 PHY
-
-Latest kernel will explode on the PHY interrupt config, since it depends
-now on allocated priv. So, run probe to allocate priv to fix it.
-
- ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13)
- CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34
-         ...
- Call Trace:
- [<8050e8a8>] at803x_config_intr+0x5c/0xd0
- [<80504b34>] phy_request_interrupt+0xa8/0xd0
- [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac
- [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130
- [<8074d8ec>] dsa_slave_create+0x270/0x420
- [<80743b04>] dsa_port_setup+0x12c/0x148
- [<8074580c>] dsa_register_switch+0xaf0/0xcc0
- [<80511344>] ar9331_sw_probe+0x370/0x388
- [<8050cb78>] mdio_probe+0x44/0x70
- [<804df300>] really_probe+0x200/0x424
- [<804df7b4>] __driver_probe_device+0x290/0x298
- [<804df810>] driver_probe_device+0x54/0xe4
- [<804dfd50>] __device_attach_driver+0xe4/0x130
- [<804dcb00>] bus_for_each_drv+0xb4/0xd8
- [<804dfac4>] __device_attach+0x104/0x1a4
- [<804ddd24>] bus_probe_device+0x48/0xc4
- [<804deb44>] deferred_probe_work_func+0xf0/0x10c
- [<800a0ffc>] process_one_work+0x314/0x4d4
- [<800a17fc>] worker_thread+0x2a4/0x354
- [<800a9a54>] kthread+0x134/0x13c
- [<8006306c>] ret_from_kernel_thread+0x14/0x1c
-
-Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it
-too.
-
-Fixes: 3265f4218878 ("net: phy: at803x: add fiber support")
-Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1530,6 +1530,8 @@ static struct phy_driver at803x_driver[]
- 	/* ATHEROS AR9331 */
- 	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
- 	.name			= "Qualcomm Atheros AR9331 built-in PHY",
-+	.probe			= at803x_probe,
-+	.remove			= at803x_remove,
- 	.suspend		= at803x_suspend,
- 	.resume			= at803x_resume,
- 	.flags			= PHY_POLL_CABLE_TEST,
diff --git a/target/linux/generic/backport-5.10/775-v5.18-05-net-phy-at803x-fix-error-return-code-in-at803x_probe.patch b/target/linux/generic/backport-5.10/775-v5.18-05-net-phy-at803x-fix-error-return-code-in-at803x_probe.patch
deleted file mode 100644
index fc31775c1904..000000000000
--- a/target/linux/generic/backport-5.10/775-v5.18-05-net-phy-at803x-fix-error-return-code-in-at803x_probe.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 1f0dd412e34e177621769866bef347f0b22364df Mon Sep 17 00:00:00 2001
-From: Wei Yongjun <weiyongjun1@huawei.com>
-Date: Fri, 18 Nov 2022 10:36:35 +0000
-Subject: [PATCH] net: phy: at803x: fix error return code in at803x_probe()
-
-Fix to return a negative error code from the ccr read error handling
-case instead of 0, as done elsewhere in this function.
-
-Fixes: 3265f4218878 ("net: phy: at803x: add fiber support")
-Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20221118103635.254256-1-weiyongjun@huaweicloud.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/at803x.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -726,8 +726,10 @@ static int at803x_probe(struct phy_devic
- 		int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
- 		int mode_cfg;
- 
--		if (ccr < 0)
-+		if (ccr < 0) {
-+			ret = ccr;
- 			goto err;
-+		}
- 		mode_cfg = ccr & AT803X_MODE_CFG_MASK;
- 
- 		switch (mode_cfg) {
diff --git a/target/linux/generic/backport-5.10/780-v5.11-net-usb-r8152-Provide-missing-documentation-for-some.patch b/target/linux/generic/backport-5.10/780-v5.11-net-usb-r8152-Provide-missing-documentation-for-some.patch
deleted file mode 100644
index e69144fcd82e..000000000000
--- a/target/linux/generic/backport-5.10/780-v5.11-net-usb-r8152-Provide-missing-documentation-for-some.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 586f04ce6a391419ca3cc9cef6b6f38570cede88 Mon Sep 17 00:00:00 2001
-From: Lee Jones <lee.jones@linaro.org>
-Date: Mon, 2 Nov 2020 11:45:04 +0000
-Subject: [PATCH] net: usb: r8152: Provide missing documentation for
- some struct members
-
-commit 34e653efb602e0651867fb5ab14369b555a61dcd upstream.
-
-Fixes the following W=1 kernel build warning(s):
-
- drivers/net/usb/r8152.c:934: warning: Function parameter or member 'blk_hdr' not described in 'fw_mac'
- drivers/net/usb/r8152.c:934: warning: Function parameter or member 'reserved' not described in 'fw_mac'
- drivers/net/usb/r8152.c:947: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_patch_key'
- drivers/net/usb/r8152.c:947: warning: Function parameter or member 'reserved' not described in 'fw_phy_patch_key'
- drivers/net/usb/r8152.c:986: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_nc'
- drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc'
- drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc'
- drivers/net/usb/r8152.c:986: warning: Function parameter or member 'reserved' not described in 'fw_phy_nc'
-
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Acked-by: Hayes Wang <hayeswang@realtek.com>
-Link: https://lore.kernel.org/r/20201102114512.1062724-23-lee.jones@linaro.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -898,6 +898,7 @@ struct fw_header {
-  * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
-  *	The layout of the firmware block is:
-  *	<struct fw_mac> + <info> + <firmware data>.
-+ * @blk_hdr: firmware descriptor (type, length)
-  * @fw_offset: offset of the firmware binary data. The start address of
-  *	the data would be the address of struct fw_mac + @fw_offset.
-  * @fw_reg: the register to load the firmware. Depends on chip.
-@@ -911,6 +912,7 @@ struct fw_header {
-  * @bp_num: the break point number which needs to be set for this firmware.
-  *	Depends on the firmware.
-  * @bp: break points. Depends on firmware.
-+ * @reserved: reserved space (unused)
-  * @fw_ver_reg: the register to store the fw version.
-  * @fw_ver_data: the firmware version of the current type.
-  * @info: additional information for debugging, and is followed by the
-@@ -936,8 +938,10 @@ struct fw_mac {
- /**
-  * struct fw_phy_patch_key - a firmware block used by RTL_FW_PHY_START.
-  *	This is used to set patch key when loading the firmware of PHY.
-+ * @blk_hdr: firmware descriptor (type, length)
-  * @key_reg: the register to write the patch key.
-  * @key_data: patch key.
-+ * @reserved: reserved space (unused)
-  */
- struct fw_phy_patch_key {
- 	struct fw_block blk_hdr;
-@@ -950,6 +954,7 @@ struct fw_phy_patch_key {
-  * struct fw_phy_nc - a firmware block used by RTL_FW_PHY_NC.
-  *	The layout of the firmware block is:
-  *	<struct fw_phy_nc> + <info> + <firmware data>.
-+ * @blk_hdr: firmware descriptor (type, length)
-  * @fw_offset: offset of the firmware binary data. The start address of
-  *	the data would be the address of struct fw_phy_nc + @fw_offset.
-  * @fw_reg: the register to load the firmware. Depends on chip.
-@@ -960,6 +965,7 @@ struct fw_phy_patch_key {
-  * @mode_reg: the regitster of switching the mode.
-  * @mod_pre: the mode needing to be set before loading the firmware.
-  * @mod_post: the mode to be set when finishing to load the firmware.
-+ * @reserved: reserved space (unused)
-  * @bp_start: the start register of break points. Depends on chip.
-  * @bp_num: the break point number which needs to be set for this firmware.
-  *	Depends on the firmware.
diff --git a/target/linux/generic/backport-5.10/781-v5.11-net-usb-r8152-Fix-a-couple-of-spelling-errors-in-fw_.patch b/target/linux/generic/backport-5.10/781-v5.11-net-usb-r8152-Fix-a-couple-of-spelling-errors-in-fw_.patch
deleted file mode 100644
index 96a9a3363de9..000000000000
--- a/target/linux/generic/backport-5.10/781-v5.11-net-usb-r8152-Fix-a-couple-of-spelling-errors-in-fw_.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 5fcfa846181de6676509696c4cd7b60a22e74077 Mon Sep 17 00:00:00 2001
-From: Lee Jones <lee.jones@linaro.org>
-Date: Mon, 2 Nov 2020 11:45:09 +0000
-Subject: [PATCH] net: usb: r8152: Fix a couple of spelling errors in
- fw_phy_nc's docs
-
-commit 9f07814d01ad085b2d9f1d55b4ce532fb2c27110 upstream.
-
-Fixes the following W=1 kernel build warning(s):
-
- drivers/net/usb/r8152.c:992: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc'
- drivers/net/usb/r8152.c:992: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc'
-
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Acked-by: Hayes Wang <hayeswang@realtek.com>
-Link: https://lore.kernel.org/r/20201102114512.1062724-28-lee.jones@linaro.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -963,8 +963,8 @@ struct fw_phy_patch_key {
-  * @patch_en_addr: the register of enabling patch mode. Depends on chip.
-  * @patch_en_value: patch mode enabled mask. Depends on the firmware.
-  * @mode_reg: the regitster of switching the mode.
-- * @mod_pre: the mode needing to be set before loading the firmware.
-- * @mod_post: the mode to be set when finishing to load the firmware.
-+ * @mode_pre: the mode needing to be set before loading the firmware.
-+ * @mode_post: the mode to be set when finishing to load the firmware.
-  * @reserved: reserved space (unused)
-  * @bp_start: the start register of break points. Depends on chip.
-  * @bp_num: the break point number which needs to be set for this firmware.
diff --git a/target/linux/generic/backport-5.10/782-v5.11-net-usb-r8153_ecm-support-ECM-mode-for-RTL8153.patch b/target/linux/generic/backport-5.10/782-v5.11-net-usb-r8153_ecm-support-ECM-mode-for-RTL8153.patch
deleted file mode 100644
index 67c762d28cb4..000000000000
--- a/target/linux/generic/backport-5.10/782-v5.11-net-usb-r8153_ecm-support-ECM-mode-for-RTL8153.patch
+++ /dev/null
@@ -1,320 +0,0 @@
-From 0ef50460f7f053bd2a911ec53e01bfda646a5574 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Wed, 4 Nov 2020 10:19:22 +0800
-Subject: [PATCH] net/usb/r8153_ecm: support ECM mode for RTL8153
-
-commit c1aedf015ebdd0232757a66e2daccf1246bd609c upstream.
-
-Support ECM mode based on cdc_ether with relative mii functions,
-when CONFIG_USB_RTL8152 is not set, or the device is not supported
-by r8152 driver.
-
-Both r8152 and r8153_ecm would check the return value of
-rtl8152_get_version() in porbe(). If rtl8152_get_version()
-return none zero value, the r8152 is used for the device
-with vendor mode. Otherwise, the r8153_ecm is used for the
-device with ECM mode.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Link: https://lore.kernel.org/r/1394712342-15778-392-Taiwan-albertk@realtek.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/Makefile    |   2 +-
- drivers/net/usb/r8152.c     |  30 +------
- drivers/net/usb/r8153_ecm.c | 162 ++++++++++++++++++++++++++++++++++++
- include/linux/usb/r8152.h   |  37 ++++++++
- 4 files changed, 204 insertions(+), 27 deletions(-)
- create mode 100644 drivers/net/usb/r8153_ecm.c
- create mode 100644 include/linux/usb/r8152.h
-
---- a/drivers/net/usb/Makefile
-+++ b/drivers/net/usb/Makefile
-@@ -13,7 +13,7 @@ obj-$(CONFIG_USB_LAN78XX)	+= lan78xx.o
- obj-$(CONFIG_USB_NET_AX8817X)	+= asix.o
- asix-y := asix_devices.o asix_common.o ax88172a.o
- obj-$(CONFIG_USB_NET_AX88179_178A)      += ax88179_178a.o
--obj-$(CONFIG_USB_NET_CDCETHER)	+= cdc_ether.o
-+obj-$(CONFIG_USB_NET_CDCETHER)	+= cdc_ether.o r8153_ecm.o
- obj-$(CONFIG_USB_NET_CDC_EEM)	+= cdc_eem.o
- obj-$(CONFIG_USB_NET_DM9601)	+= dm9601.o
- obj-$(CONFIG_USB_NET_SR9700)	+= sr9700.o
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -26,6 +26,7 @@
- #include <linux/acpi.h>
- #include <linux/firmware.h>
- #include <crypto/hash.h>
-+#include <linux/usb/r8152.h>
- 
- /* Information for net-next */
- #define NETNEXT_VERSION		"11"
-@@ -653,18 +654,6 @@ enum rtl_register_content {
- 
- #define INTR_LINK		0x0004
- 
--#define RTL8152_REQT_READ	0xc0
--#define RTL8152_REQT_WRITE	0x40
--#define RTL8152_REQ_GET_REGS	0x05
--#define RTL8152_REQ_SET_REGS	0x05
--
--#define BYTE_EN_DWORD		0xff
--#define BYTE_EN_WORD		0x33
--#define BYTE_EN_BYTE		0x11
--#define BYTE_EN_SIX_BYTES	0x3f
--#define BYTE_EN_START_MASK	0x0f
--#define BYTE_EN_END_MASK	0xf0
--
- #define RTL8153_MAX_PACKET	9216 /* 9K */
- #define RTL8153_MAX_MTU		(RTL8153_MAX_PACKET - VLAN_ETH_HLEN - \
- 				 ETH_FCS_LEN)
-@@ -689,21 +678,9 @@ enum rtl8152_flags {
- 	LENOVO_MACPASSTHRU,
- };
- 
--/* Define these values to match your device */
--#define VENDOR_ID_REALTEK		0x0bda
--#define VENDOR_ID_MICROSOFT		0x045e
--#define VENDOR_ID_SAMSUNG		0x04e8
--#define VENDOR_ID_LENOVO		0x17ef
--#define VENDOR_ID_LINKSYS		0x13b1
--#define VENDOR_ID_NVIDIA		0x0955
--#define VENDOR_ID_TPLINK		0x2357
--
- #define DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2	0x3082
- #define DEVICE_ID_THINKPAD_USB_C_DOCK_GEN2		0xa387
- 
--#define MCU_TYPE_PLA			0x0100
--#define MCU_TYPE_USB			0x0000
--
- struct tally_counter {
- 	__le64	tx_packets;
- 	__le64	rx_packets;
-@@ -6604,7 +6581,7 @@ static int rtl_fw_init(struct r8152 *tp)
- 	return 0;
- }
- 
--static u8 rtl_get_version(struct usb_interface *intf)
-+u8 rtl8152_get_version(struct usb_interface *intf)
- {
- 	struct usb_device *udev = interface_to_usbdev(intf);
- 	u32 ocp_data = 0;
-@@ -6662,12 +6639,13 @@ static u8 rtl_get_version(struct usb_int
- 
- 	return version;
- }
-+EXPORT_SYMBOL_GPL(rtl8152_get_version);
- 
- static int rtl8152_probe(struct usb_interface *intf,
- 			 const struct usb_device_id *id)
- {
- 	struct usb_device *udev = interface_to_usbdev(intf);
--	u8 version = rtl_get_version(intf);
-+	u8 version = rtl8152_get_version(intf);
- 	struct r8152 *tp;
- 	struct net_device *netdev;
- 	int ret;
---- /dev/null
-+++ b/drivers/net/usb/r8153_ecm.c
-@@ -0,0 +1,162 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+#include <linux/module.h>
-+#include <linux/netdevice.h>
-+#include <linux/mii.h>
-+#include <linux/usb.h>
-+#include <linux/usb/cdc.h>
-+#include <linux/usb/usbnet.h>
-+#include <linux/usb/r8152.h>
-+
-+#define OCP_BASE		0xe86c
-+
-+static int pla_read_word(struct usbnet *dev, u16 index)
-+{
-+	u16 byen = BYTE_EN_WORD;
-+	u8 shift = index & 2;
-+	__le32 tmp;
-+	int ret;
-+
-+	if (shift)
-+		byen <<= shift;
-+
-+	index &= ~3;
-+
-+	ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index,
-+			      MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
-+	if (ret < 0)
-+		goto out;
-+
-+	ret = __le32_to_cpu(tmp);
-+	ret >>= (shift * 8);
-+	ret &= 0xffff;
-+
-+out:
-+	return ret;
-+}
-+
-+static int pla_write_word(struct usbnet *dev, u16 index, u32 data)
-+{
-+	u32 mask = 0xffff;
-+	u16 byen = BYTE_EN_WORD;
-+	u8 shift = index & 2;
-+	__le32 tmp;
-+	int ret;
-+
-+	data &= mask;
-+
-+	if (shift) {
-+		byen <<= shift;
-+		mask <<= (shift * 8);
-+		data <<= (shift * 8);
-+	}
-+
-+	index &= ~3;
-+
-+	ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index,
-+			      MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
-+
-+	if (ret < 0)
-+		goto out;
-+
-+	data |= __le32_to_cpu(tmp) & ~mask;
-+	tmp = __cpu_to_le32(data);
-+
-+	ret = usbnet_write_cmd(dev, RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, index,
-+			       MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
-+
-+out:
-+	return ret;
-+}
-+
-+static int r8153_ecm_mdio_read(struct net_device *netdev, int phy_id, int reg)
-+{
-+	struct usbnet *dev = netdev_priv(netdev);
-+	int ret;
-+
-+	ret = pla_write_word(dev, OCP_BASE, 0xa000);
-+	if (ret < 0)
-+		goto out;
-+
-+	ret = pla_read_word(dev, 0xb400 + reg * 2);
-+
-+out:
-+	return ret;
-+}
-+
-+static void r8153_ecm_mdio_write(struct net_device *netdev, int phy_id, int reg, int val)
-+{
-+	struct usbnet *dev = netdev_priv(netdev);
-+	int ret;
-+
-+	ret = pla_write_word(dev, OCP_BASE, 0xa000);
-+	if (ret < 0)
-+		return;
-+
-+	ret = pla_write_word(dev, 0xb400 + reg * 2, val);
-+}
-+
-+static int r8153_bind(struct usbnet *dev, struct usb_interface *intf)
-+{
-+	int status;
-+
-+	status = usbnet_cdc_bind(dev, intf);
-+	if (status < 0)
-+		return status;
-+
-+	dev->mii.dev = dev->net;
-+	dev->mii.mdio_read = r8153_ecm_mdio_read;
-+	dev->mii.mdio_write = r8153_ecm_mdio_write;
-+	dev->mii.reg_num_mask = 0x1f;
-+	dev->mii.supports_gmii = 1;
-+
-+	return status;
-+}
-+
-+static const struct driver_info r8153_info = {
-+	.description =	"RTL8153 ECM Device",
-+	.flags =	FLAG_ETHER,
-+	.bind =		r8153_bind,
-+	.unbind =	usbnet_cdc_unbind,
-+	.status =	usbnet_cdc_status,
-+	.manage_power =	usbnet_manage_power,
-+};
-+
-+static const struct usb_device_id products[] = {
-+{
-+	USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_REALTEK, 0x8153, USB_CLASS_COMM,
-+				      USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
-+	.driver_info = (unsigned long)&r8153_info,
-+},
-+
-+	{ },		/* END */
-+};
-+MODULE_DEVICE_TABLE(usb, products);
-+
-+static int rtl8153_ecm_probe(struct usb_interface *intf,
-+			     const struct usb_device_id *id)
-+{
-+#if IS_REACHABLE(CONFIG_USB_RTL8152)
-+	if (rtl8152_get_version(intf))
-+		return -ENODEV;
-+#endif
-+
-+	return usbnet_probe(intf, id);
-+}
-+
-+static struct usb_driver r8153_ecm_driver = {
-+	.name =		"r8153_ecm",
-+	.id_table =	products,
-+	.probe =	rtl8153_ecm_probe,
-+	.disconnect =	usbnet_disconnect,
-+	.suspend =	usbnet_suspend,
-+	.resume =	usbnet_resume,
-+	.reset_resume =	usbnet_resume,
-+	.supports_autosuspend = 1,
-+	.disable_hub_initiated_lpm = 1,
-+};
-+
-+module_usb_driver(r8153_ecm_driver);
-+
-+MODULE_AUTHOR("Hayes Wang");
-+MODULE_DESCRIPTION("Realtek USB ECM device");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/include/linux/usb/r8152.h
-@@ -0,0 +1,37 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/*
-+ *  Copyright (c) 2020 Realtek Semiconductor Corp. All rights reserved.
-+ */
-+
-+#ifndef	__LINUX_R8152_H
-+#define __LINUX_R8152_H
-+
-+#define RTL8152_REQT_READ		0xc0
-+#define RTL8152_REQT_WRITE		0x40
-+#define RTL8152_REQ_GET_REGS		0x05
-+#define RTL8152_REQ_SET_REGS		0x05
-+
-+#define BYTE_EN_DWORD			0xff
-+#define BYTE_EN_WORD			0x33
-+#define BYTE_EN_BYTE			0x11
-+#define BYTE_EN_SIX_BYTES		0x3f
-+#define BYTE_EN_START_MASK		0x0f
-+#define BYTE_EN_END_MASK		0xf0
-+
-+#define MCU_TYPE_PLA			0x0100
-+#define MCU_TYPE_USB			0x0000
-+
-+/* Define these values to match your device */
-+#define VENDOR_ID_REALTEK		0x0bda
-+#define VENDOR_ID_MICROSOFT		0x045e
-+#define VENDOR_ID_SAMSUNG		0x04e8
-+#define VENDOR_ID_LENOVO		0x17ef
-+#define VENDOR_ID_LINKSYS		0x13b1
-+#define VENDOR_ID_NVIDIA		0x0955
-+#define VENDOR_ID_TPLINK		0x2357
-+
-+#if IS_REACHABLE(CONFIG_USB_RTL8152)
-+extern u8 rtl8152_get_version(struct usb_interface *intf);
-+#endif
-+
-+#endif /* __LINUX_R8152_H */
diff --git a/target/linux/generic/backport-5.10/783-v5.12-net-usb-r8152-use-new-tasklet-API.patch b/target/linux/generic/backport-5.10/783-v5.12-net-usb-r8152-use-new-tasklet-API.patch
deleted file mode 100644
index 1f43340c68da..000000000000
--- a/target/linux/generic/backport-5.10/783-v5.12-net-usb-r8152-use-new-tasklet-API.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 90f1afc7f96c8f7cf19c82e5f4b39e61a63b053d Mon Sep 17 00:00:00 2001
-From: Emil Renner Berthing <kernel@esmil.dk>
-Date: Sun, 31 Jan 2021 00:47:29 +0100
-Subject: [PATCH] net: usb: r8152: use new tasklet API
-
-commit f3163f1cb87141c7a41a15a5d4c98b353f807b04 upstream.
-
-This converts the driver to use the new tasklet API introduced in
-commit 12cc923f1ccc ("tasklet: Introduce new initialization API")
-
-Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -2395,11 +2395,9 @@ static void tx_bottom(struct r8152 *tp)
- 	} while (res == 0);
- }
- 
--static void bottom_half(unsigned long data)
-+static void bottom_half(struct tasklet_struct *t)
- {
--	struct r8152 *tp;
--
--	tp = (struct r8152 *)data;
-+	struct r8152 *tp = from_tasklet(tp, t, tx_tl);
- 
- 	if (test_bit(RTL8152_UNPLUG, &tp->flags))
- 		return;
-@@ -6697,7 +6695,7 @@ static int rtl8152_probe(struct usb_inte
- 	mutex_init(&tp->control);
- 	INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
- 	INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t);
--	tasklet_init(&tp->tx_tl, bottom_half, (unsigned long)tp);
-+	tasklet_setup(&tp->tx_tl, bottom_half);
- 	tasklet_disable(&tp->tx_tl);
- 
- 	netdev->netdev_ops = &rtl8152_netdev_ops;
diff --git a/target/linux/generic/backport-5.10/784-v5.12-r8152-replace-several-functions-about-phy-patch-requ.patch b/target/linux/generic/backport-5.10/784-v5.12-r8152-replace-several-functions-about-phy-patch-requ.patch
deleted file mode 100644
index 759a09ae0917..000000000000
--- a/target/linux/generic/backport-5.10/784-v5.12-r8152-replace-several-functions-about-phy-patch-requ.patch
+++ /dev/null
@@ -1,198 +0,0 @@
-From 86b98abf4f8c691c260c5113d6a2d32f5377caca Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Wed, 3 Feb 2021 17:14:28 +0800
-Subject: [PATCH] r8152: replace several functions about phy patch
- request
-
-commit a08c0d309d8c078d22717d815cf9853f6f2c07bd upstream.
-
-Replace r8153_patch_request() with rtl_phy_patch_request().
-Replace r8153_pre_ram_code() with rtl_pre_ram_code().
-Replace r8153_post_ram_code() with rtl_post_ram_code().
-Add rtl_patch_key_set().
-
-The new functions have an additional parameter. It is used to wait
-the patch request command finished. When the PHY is resumed from
-the state of power cut, the PHY is at a safe mode and the
-OCP_PHY_PATCH_STAT wouldn't be updated. For this situation, it is
-safe to set patch request command without waiting OCP_PHY_PATCH_STAT.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 84 ++++++++++++++++++++++++-----------------
- 1 file changed, 50 insertions(+), 34 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -3445,59 +3445,76 @@ static void rtl_clear_bp(struct r8152 *t
- 	ocp_write_word(tp, type, PLA_BP_BA, 0);
- }
- 
--static int r8153_patch_request(struct r8152 *tp, bool request)
-+static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait)
- {
--	u16 data;
-+	u16 data, check;
- 	int i;
- 
- 	data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD);
--	if (request)
-+	if (request) {
- 		data |= PATCH_REQUEST;
--	else
-+		check = 0;
-+	} else {
- 		data &= ~PATCH_REQUEST;
-+		check = PATCH_READY;
-+	}
- 	ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data);
- 
--	for (i = 0; request && i < 5000; i++) {
-+	for (i = 0; wait && i < 5000; i++) {
-+		u32 ocp_data;
-+
- 		usleep_range(1000, 2000);
--		if (ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)
-+		ocp_data = ocp_reg_read(tp, OCP_PHY_PATCH_STAT);
-+		if ((ocp_data & PATCH_READY) ^ check)
- 			break;
- 	}
- 
--	if (request && !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
--		netif_err(tp, drv, tp->netdev, "patch request fail\n");
--		r8153_patch_request(tp, false);
-+	if (request && wait &&
-+	    !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
-+		dev_err(&tp->intf->dev, "PHY patch request fail\n");
-+		rtl_phy_patch_request(tp, false, false);
- 		return -ETIME;
- 	} else {
- 		return 0;
- 	}
- }
- 
--static int r8153_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key)
-+static void rtl_patch_key_set(struct r8152 *tp, u16 key_addr, u16 patch_key)
- {
--	if (r8153_patch_request(tp, true)) {
--		dev_err(&tp->intf->dev, "patch request fail\n");
--		return -ETIME;
--	}
-+	if (patch_key && key_addr) {
-+		sram_write(tp, key_addr, patch_key);
-+		sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK);
-+	} else if (key_addr) {
-+		u16 data;
- 
--	sram_write(tp, key_addr, patch_key);
--	sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK);
-+		sram_write(tp, 0x0000, 0x0000);
- 
--	return 0;
-+		data = ocp_reg_read(tp, OCP_PHY_LOCK);
-+		data &= ~PATCH_LOCK;
-+		ocp_reg_write(tp, OCP_PHY_LOCK, data);
-+
-+		sram_write(tp, key_addr, 0x0000);
-+	} else {
-+		WARN_ON_ONCE(1);
-+	}
- }
- 
--static int r8153_post_ram_code(struct r8152 *tp, u16 key_addr)
-+static int
-+rtl_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key, bool wait)
- {
--	u16 data;
-+	if (rtl_phy_patch_request(tp, true, wait))
-+		return -ETIME;
- 
--	sram_write(tp, 0x0000, 0x0000);
-+	rtl_patch_key_set(tp, key_addr, patch_key);
- 
--	data = ocp_reg_read(tp, OCP_PHY_LOCK);
--	data &= ~PATCH_LOCK;
--	ocp_reg_write(tp, OCP_PHY_LOCK, data);
-+	return 0;
-+}
- 
--	sram_write(tp, key_addr, 0x0000);
-+static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait)
-+{
-+	rtl_patch_key_set(tp, key_addr, 0);
- 
--	r8153_patch_request(tp, false);
-+	rtl_phy_patch_request(tp, false, wait);
- 
- 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
- 
-@@ -3982,7 +3999,7 @@ static void rtl8152_fw_mac_apply(struct
- 	dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info);
- }
- 
--static void rtl8152_apply_firmware(struct r8152 *tp)
-+static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut)
- {
- 	struct rtl_fw *rtl_fw = &tp->rtl_fw;
- 	const struct firmware *fw;
-@@ -4013,12 +4030,11 @@ static void rtl8152_apply_firmware(struc
- 		case RTL_FW_PHY_START:
- 			key = (struct fw_phy_patch_key *)block;
- 			key_addr = __le16_to_cpu(key->key_reg);
--			r8153_pre_ram_code(tp, key_addr,
--					   __le16_to_cpu(key->key_data));
-+			rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut);
- 			break;
- 		case RTL_FW_PHY_STOP:
- 			WARN_ON(!key_addr);
--			r8153_post_ram_code(tp, key_addr);
-+			rtl_post_ram_code(tp, key_addr, !power_cut);
- 			break;
- 		case RTL_FW_PHY_NC:
- 			rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
-@@ -4223,7 +4239,7 @@ static void rtl8152_disable(struct r8152
- 
- static void r8152b_hw_phy_cfg(struct r8152 *tp)
- {
--	rtl8152_apply_firmware(tp);
-+	rtl8152_apply_firmware(tp, false);
- 	rtl_eee_enable(tp, tp->eee_en);
- 	r8152_aldps_en(tp, true);
- 	r8152b_enable_fc(tp);
-@@ -4505,7 +4521,7 @@ static void r8153_hw_phy_cfg(struct r815
- 	/* disable EEE before updating the PHY parameters */
- 	rtl_eee_enable(tp, false);
- 
--	rtl8152_apply_firmware(tp);
-+	rtl8152_apply_firmware(tp, false);
- 
- 	if (tp->version == RTL_VER_03) {
- 		data = ocp_reg_read(tp, OCP_EEE_CFG);
-@@ -4579,7 +4595,7 @@ static void r8153b_hw_phy_cfg(struct r81
- 	/* disable EEE before updating the PHY parameters */
- 	rtl_eee_enable(tp, false);
- 
--	rtl8152_apply_firmware(tp);
-+	rtl8152_apply_firmware(tp, false);
- 
- 	r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
- 
-@@ -4620,7 +4636,7 @@ static void r8153b_hw_phy_cfg(struct r81
- 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
- 
- 	/* Advnace EEE */
--	if (!r8153_patch_request(tp, true)) {
-+	if (!rtl_phy_patch_request(tp, true, true)) {
- 		data = ocp_reg_read(tp, OCP_POWER_CFG);
- 		data |= EEE_CLKDIV_EN;
- 		ocp_reg_write(tp, OCP_POWER_CFG, data);
-@@ -4637,7 +4653,7 @@ static void r8153b_hw_phy_cfg(struct r81
- 		ocp_reg_write(tp, OCP_SYSCLK_CFG, clk_div_expo(5));
- 		tp->ups_info._250m_ckdiv = true;
- 
--		r8153_patch_request(tp, false);
-+		rtl_phy_patch_request(tp, false, true);
- 	}
- 
- 	if (tp->eee_en)
diff --git a/target/linux/generic/backport-5.10/785-v5.12-r8152-adjust-the-flow-of-power-cut-for-RTL8153B.patch b/target/linux/generic/backport-5.10/785-v5.12-r8152-adjust-the-flow-of-power-cut-for-RTL8153B.patch
deleted file mode 100644
index 33969c7a546f..000000000000
--- a/target/linux/generic/backport-5.10/785-v5.12-r8152-adjust-the-flow-of-power-cut-for-RTL8153B.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From 29a61d8564ad3439d03c7ec135016a4e70072af1 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Wed, 3 Feb 2021 17:14:29 +0800
-Subject: [PATCH] r8152: adjust the flow of power cut for RTL8153B
-
-commit 80fd850b31f09263ad175b2f640d5c5c6f76ed41 upstream.
-
-For runtime resuming, the RTL8153B may be resumed from the state
-of power cut, when enabling the feature of UPS. Then, the PHY
-would be reset, so it is necessary to be initailized again.
-
-Besides, the USB_U1U2_TIMER also has to be set again, so I move
-it from r8153b_init() to r8153b_hw_phy_cfg().
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 68 ++++++++++++++++++++++++-----------------
- 1 file changed, 40 insertions(+), 28 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -1371,6 +1371,10 @@ void write_mii_word(struct net_device *n
- static int
- r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags);
- 
-+static int
-+rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
-+		  u32 advertising);
-+
- static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
- {
- 	struct r8152 *tp = netdev_priv(netdev);
-@@ -3184,8 +3188,6 @@ static void r8153b_ups_en(struct r8152 *
- 		ocp_data |= BIT(0);
- 		ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
- 	} else {
--		u16 data;
--
- 		ocp_data &= ~(UPS_EN | USP_PREWAKE);
- 		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
- 
-@@ -3193,31 +3195,20 @@ static void r8153b_ups_en(struct r8152 *
- 		ocp_data &= ~BIT(0);
- 		ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
- 
--		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
--		ocp_data &= ~PCUT_STATUS;
--		ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
-+		if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
-+			int i;
- 
--		data = r8153_phy_status(tp, 0);
-+			for (i = 0; i < 500; i++) {
-+				if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
-+				    AUTOLOAD_DONE)
-+					break;
-+				msleep(20);
-+			}
- 
--		switch (data) {
--		case PHY_STAT_PWRDN:
--		case PHY_STAT_EXT_INIT:
--			r8153b_green_en(tp,
--					test_bit(GREEN_ETHERNET, &tp->flags));
--
--			data = r8152_mdio_read(tp, MII_BMCR);
--			data &= ~BMCR_PDOWN;
--			data |= BMCR_RESET;
--			r8152_mdio_write(tp, MII_BMCR, data);
-+			tp->rtl_ops.hw_phy_cfg(tp);
- 
--			data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
--			fallthrough;
--
--		default:
--			if (data != PHY_STAT_LAN_ON)
--				netif_warn(tp, link, tp->netdev,
--					   "PHY not ready");
--			break;
-+			rtl8152_set_speed(tp, tp->autoneg, tp->speed,
-+					  tp->duplex, tp->advertising);
- 		}
- 	}
- }
-@@ -4589,13 +4580,37 @@ static void r8153b_hw_phy_cfg(struct r81
- 	u32 ocp_data;
- 	u16 data;
- 
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
-+	if (ocp_data & PCUT_STATUS) {
-+		ocp_data &= ~PCUT_STATUS;
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
-+	}
-+
- 	/* disable ALDPS before updating the PHY parameters */
- 	r8153_aldps_en(tp, false);
- 
- 	/* disable EEE before updating the PHY parameters */
- 	rtl_eee_enable(tp, false);
- 
--	rtl8152_apply_firmware(tp, false);
-+	/* U1/U2/L1 idle timer. 500 us */
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
-+
-+	data = r8153_phy_status(tp, 0);
-+
-+	switch (data) {
-+	case PHY_STAT_PWRDN:
-+	case PHY_STAT_EXT_INIT:
-+		rtl8152_apply_firmware(tp, true);
-+
-+		data = r8152_mdio_read(tp, MII_BMCR);
-+		data &= ~BMCR_PDOWN;
-+		r8152_mdio_write(tp, MII_BMCR, data);
-+		break;
-+	case PHY_STAT_LAN_ON:
-+	default:
-+		rtl8152_apply_firmware(tp, false);
-+		break;
-+	}
- 
- 	r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
- 
-@@ -5524,9 +5539,6 @@ static void r8153b_init(struct r8152 *tp
- 	/* MSC timer = 0xfff * 8ms = 32760 ms */
- 	ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
- 
--	/* U1/U2/L1 idle timer. 500 us */
--	ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
--
- 	r8153b_power_cut_en(tp, false);
- 	r8153b_ups_en(tp, false);
- 	r8153_queue_wake(tp, false);
diff --git a/target/linux/generic/backport-5.10/786-v5.12-r8152-enable-U1-U2-for-USB_SPEED_SUPER.patch b/target/linux/generic/backport-5.10/786-v5.12-r8152-enable-U1-U2-for-USB_SPEED_SUPER.patch
deleted file mode 100644
index 6815fabe1021..000000000000
--- a/target/linux/generic/backport-5.10/786-v5.12-r8152-enable-U1-U2-for-USB_SPEED_SUPER.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 69b4339c0b9f3edc6a8f681f05efaaf4add1bb0e Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 19 Feb 2021 17:04:40 +0800
-Subject: [PATCH] r8152: enable U1/U2 for USB_SPEED_SUPER
-
-commit 7a0ae61acde2cebd69665837170405eced86a6c7 upstream.
-
-U1/U2 shoued be enabled for USB 3.0 or later. The USB 2.0 doesn't
-support it.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -3337,7 +3337,7 @@ static void rtl8153b_runtime_enable(stru
- 		r8153b_ups_en(tp, false);
- 		r8153_queue_wake(tp, false);
- 		rtl_runtime_suspend_enable(tp, false);
--		if (tp->udev->speed != USB_SPEED_HIGH)
-+		if (tp->udev->speed >= USB_SPEED_SUPER)
- 			r8153b_u1u2en(tp, true);
- 	}
- }
-@@ -5030,7 +5030,7 @@ static void rtl8153b_up(struct r8152 *tp
- 
- 	r8153_aldps_en(tp, true);
- 
--	if (tp->udev->speed != USB_SPEED_HIGH)
-+	if (tp->udev->speed >= USB_SPEED_SUPER)
- 		r8153b_u1u2en(tp, true);
- }
- 
-@@ -5552,8 +5552,9 @@ static void r8153b_init(struct r8152 *tp
- 	ocp_data |= POLL_LINK_CHG;
- 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
- 
--	if (tp->udev->speed != USB_SPEED_HIGH)
-+	if (tp->udev->speed >= USB_SPEED_SUPER)
- 		r8153b_u1u2en(tp, true);
-+
- 	usb_enable_lpm(tp->udev);
- 
- 	/* MAC clock speed down */
diff --git a/target/linux/generic/backport-5.10/787-v5.12-r8152-check-if-the-pointer-of-the-function-exists.patch b/target/linux/generic/backport-5.10/787-v5.12-r8152-check-if-the-pointer-of-the-function-exists.patch
deleted file mode 100644
index f13626faf0c9..000000000000
--- a/target/linux/generic/backport-5.10/787-v5.12-r8152-check-if-the-pointer-of-the-function-exists.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From e78b75f5be204a0a235da995d01c778dc282bb42 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 19 Feb 2021 17:04:41 +0800
-Subject: [PATCH] r8152: check if the pointer of the function exists
-
-commit c79515e47935c747282c6ed2ee5b2ef039756eeb upstream.
-
-Return error code if autosuspend_en, eee_get, or eee_set don't exist.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -5737,6 +5737,9 @@ static int rtl8152_runtime_suspend(struc
- 	struct net_device *netdev = tp->netdev;
- 	int ret = 0;
- 
-+	if (!tp->rtl_ops.autosuspend_en)
-+		return -EBUSY;
-+
- 	set_bit(SELECTIVE_SUSPEND, &tp->flags);
- 	smp_mb__after_atomic();
- 
-@@ -6136,6 +6139,11 @@ rtl_ethtool_get_eee(struct net_device *n
- 	struct r8152 *tp = netdev_priv(net);
- 	int ret;
- 
-+	if (!tp->rtl_ops.eee_get) {
-+		ret = -EOPNOTSUPP;
-+		goto out;
-+	}
-+
- 	ret = usb_autopm_get_interface(tp->intf);
- 	if (ret < 0)
- 		goto out;
-@@ -6158,6 +6166,11 @@ rtl_ethtool_set_eee(struct net_device *n
- 	struct r8152 *tp = netdev_priv(net);
- 	int ret;
- 
-+	if (!tp->rtl_ops.eee_set) {
-+		ret = -EOPNOTSUPP;
-+		goto out;
-+	}
-+
- 	ret = usb_autopm_get_interface(tp->intf);
- 	if (ret < 0)
- 		goto out;
diff --git a/target/linux/generic/backport-5.10/788-v5.12-r8152-replace-netif_err-with-dev_err.patch b/target/linux/generic/backport-5.10/788-v5.12-r8152-replace-netif_err-with-dev_err.patch
deleted file mode 100644
index 24c606b5f527..000000000000
--- a/target/linux/generic/backport-5.10/788-v5.12-r8152-replace-netif_err-with-dev_err.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 38e44c7926512cff0b2809dc329de2a8e769e523 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 19 Feb 2021 17:04:42 +0800
-Subject: [PATCH] r8152: replace netif_err with dev_err
-
-commit 156c3207611262266f0eea589ac3f00c5657320e upstream.
-
-Some messages are before calling register_netdev(), so replace
-netif_err() with dev_err().
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -6573,7 +6573,7 @@ static int rtl_ops_init(struct r8152 *tp
- 
- 	default:
- 		ret = -ENODEV;
--		netif_err(tp, probe, tp->netdev, "Unknown Device\n");
-+		dev_err(&tp->intf->dev, "Unknown Device\n");
- 		break;
- 	}
- 
-@@ -6830,7 +6830,7 @@ static int rtl8152_probe(struct usb_inte
- 
- 	ret = register_netdev(netdev);
- 	if (ret != 0) {
--		netif_err(tp, probe, netdev, "couldn't register the device\n");
-+		dev_err(&intf->dev, "couldn't register the device\n");
- 		goto out1;
- 	}
- 
diff --git a/target/linux/generic/backport-5.10/789-v5.12-r8152-spilt-rtl_set_eee_plus-and-r8153b_green_en.patch b/target/linux/generic/backport-5.10/789-v5.12-r8152-spilt-rtl_set_eee_plus-and-r8153b_green_en.patch
deleted file mode 100644
index c5e7ff962429..000000000000
--- a/target/linux/generic/backport-5.10/789-v5.12-r8152-spilt-rtl_set_eee_plus-and-r8153b_green_en.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From 260814de2d6cb958767785ffcb2e76915d1be32b Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 19 Feb 2021 17:04:43 +0800
-Subject: [PATCH] r8152: spilt rtl_set_eee_plus and r8153b_green_en
-
-commit 40fa7568ac230446d888b7ad402cff9e20fe3ad5 upstream.
-
-Add rtl_eee_plus_en() and rtl_green_en().
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 43 ++++++++++++++++++++++++++---------------
- 1 file changed, 27 insertions(+), 16 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -2634,21 +2634,24 @@ static inline u8 rtl8152_get_speed(struc
- 	return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
- }
- 
--static void rtl_set_eee_plus(struct r8152 *tp)
-+static void rtl_eee_plus_en(struct r8152 *tp, bool enable)
- {
- 	u32 ocp_data;
--	u8 speed;
- 
--	speed = rtl8152_get_speed(tp);
--	if (speed & _10bps) {
--		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
-+	if (enable)
- 		ocp_data |= EEEP_CR_EEEP_TX;
--		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
--	} else {
--		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
-+	else
- 		ocp_data &= ~EEEP_CR_EEEP_TX;
--		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
--	}
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
-+}
-+
-+static void rtl_set_eee_plus(struct r8152 *tp)
-+{
-+	if (rtl8152_get_speed(tp) & _10bps)
-+		rtl_eee_plus_en(tp, true);
-+	else
-+		rtl_eee_plus_en(tp, false);
- }
- 
- static void rxdy_gated_en(struct r8152 *tp, bool enable)
-@@ -3129,10 +3132,22 @@ static void r8153b_ups_flags(struct r815
- 	ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
- }
- 
--static void r8153b_green_en(struct r8152 *tp, bool enable)
-+static void rtl_green_en(struct r8152 *tp, bool enable)
- {
- 	u16 data;
- 
-+	data = sram_read(tp, SRAM_GREEN_CFG);
-+	if (enable)
-+		data |= GREEN_ETH_EN;
-+	else
-+		data &= ~GREEN_ETH_EN;
-+	sram_write(tp, SRAM_GREEN_CFG, data);
-+
-+	tp->ups_info.green = enable;
-+}
-+
-+static void r8153b_green_en(struct r8152 *tp, bool enable)
-+{
- 	if (enable) {
- 		sram_write(tp, 0x8045, 0);	/* 10M abiq&ldvbias */
- 		sram_write(tp, 0x804d, 0x1222);	/* 100M short abiq&ldvbias */
-@@ -3143,11 +3158,7 @@ static void r8153b_green_en(struct r8152
- 		sram_write(tp, 0x805d, 0x2444);	/* 1000M short abiq&ldvbias */
- 	}
- 
--	data = sram_read(tp, SRAM_GREEN_CFG);
--	data |= GREEN_ETH_EN;
--	sram_write(tp, SRAM_GREEN_CFG, data);
--
--	tp->ups_info.green = enable;
-+	rtl_green_en(tp, true);
- }
- 
- static u16 r8153_phy_status(struct r8152 *tp, u16 desired)
diff --git a/target/linux/generic/backport-5.10/790-v5.13-r8152-set-inter-fram-gap-time-depending-on-speed.patch b/target/linux/generic/backport-5.10/790-v5.13-r8152-set-inter-fram-gap-time-depending-on-speed.patch
deleted file mode 100644
index 9ed92328c397..000000000000
--- a/target/linux/generic/backport-5.10/790-v5.13-r8152-set-inter-fram-gap-time-depending-on-speed.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From f1bbbb260a8016373adf239c716d2da90e6ced0b Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 16 Apr 2021 16:04:32 +0800
-Subject: [PATCH] r8152: set inter fram gap time depending on speed
-
-commit 5133bcc7481528e36fff0a3b056601efb704fb32 upstream.
-
-Set the maximum inter frame gap time (144ns) for speed 10M/half and
-100M/half. It improves the performance for those speeds. And, there
-is no effect for the other speeds.
-
-For 10M/half and 100M/half, the fast inter frame gap time let the
-device couldn't use the feature of the aggregation effectively,
-because the transfer would be completed fastly. Therefore, use the
-maximum value to improve the effect of the aggregation. However, you
-may not feel the improvement for fast CPUs, because they compensate
-for the effect of the aggregation.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -249,6 +249,9 @@
- 
- /* PLA_TCR1 */
- #define VERSION_MASK		0x7cf0
-+#define IFG_MASK		(BIT(3) | BIT(9) | BIT(8))
-+#define IFG_144NS		BIT(9)
-+#define IFG_96NS		(BIT(9) | BIT(8))
- 
- /* PLA_MTPS */
- #define MTPS_JUMBO		(12 * 1024 / 64)
-@@ -2749,6 +2752,29 @@ static int rtl_stop_rx(struct r8152 *tp)
- 	return 0;
- }
- 
-+static void rtl_set_ifg(struct r8152 *tp, u16 speed)
-+{
-+	u32 ocp_data;
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1);
-+	ocp_data &= ~IFG_MASK;
-+	if ((speed & (_10bps | _100bps)) && !(speed & FULL_DUP)) {
-+		ocp_data |= IFG_144NS;
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
-+
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
-+		ocp_data &= ~TX10MIDLE_EN;
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
-+	} else {
-+		ocp_data |= IFG_96NS;
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
-+
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
-+		ocp_data |= TX10MIDLE_EN;
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
-+	}
-+}
-+
- static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)
- {
- 	ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN,
-@@ -2852,6 +2878,8 @@ static int rtl8153_enable(struct r8152 *
- 	r8153_set_rx_early_timeout(tp);
- 	r8153_set_rx_early_size(tp);
- 
-+	rtl_set_ifg(tp, rtl8152_get_speed(tp));
-+
- 	if (tp->version == RTL_VER_09) {
- 		u32 ocp_data;
- 
diff --git a/target/linux/generic/backport-5.10/791-v5.13-r8152-adjust-rtl8152_check_firmware-function.patch b/target/linux/generic/backport-5.10/791-v5.13-r8152-adjust-rtl8152_check_firmware-function.patch
deleted file mode 100644
index c61c4bb98a97..000000000000
--- a/target/linux/generic/backport-5.10/791-v5.13-r8152-adjust-rtl8152_check_firmware-function.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From f10c9edf47d3fa240d965e151a48c670f5035b73 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 16 Apr 2021 16:04:33 +0800
-Subject: [PATCH] r8152: adjust rtl8152_check_firmware function
-
-commit a8a7be178e81a3d4b6972cbeb0ccd091ca2f9f89 upstream.
-
-Use bits operations to record and check the firmware.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 51 +++++++++++++++++++++++------------------
- 1 file changed, 29 insertions(+), 22 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -874,6 +874,14 @@ struct fw_header {
- 	struct fw_block blocks[];
- } __packed;
- 
-+enum rtl8152_fw_flags {
-+	FW_FLAGS_USB = 0,
-+	FW_FLAGS_PLA,
-+	FW_FLAGS_START,
-+	FW_FLAGS_STOP,
-+	FW_FLAGS_NC,
-+};
-+
- /**
-  * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
-  *	The layout of the firmware block is:
-@@ -3802,10 +3810,7 @@ static long rtl8152_check_firmware(struc
- {
- 	const struct firmware *fw = rtl_fw->fw;
- 	struct fw_header *fw_hdr = (struct fw_header *)fw->data;
--	struct fw_mac *pla = NULL, *usb = NULL;
--	struct fw_phy_patch_key *start = NULL;
--	struct fw_phy_nc *phy_nc = NULL;
--	struct fw_block *stop = NULL;
-+	unsigned long fw_flags = 0;
- 	long ret = -EFAULT;
- 	int i;
- 
-@@ -3834,50 +3839,52 @@ static long rtl8152_check_firmware(struc
- 				goto fail;
- 			goto fw_end;
- 		case RTL_FW_PLA:
--			if (pla) {
-+			if (test_bit(FW_FLAGS_PLA, &fw_flags)) {
- 				dev_err(&tp->intf->dev,
- 					"multiple PLA firmware encountered");
- 				goto fail;
- 			}
- 
--			pla = (struct fw_mac *)block;
--			if (!rtl8152_is_fw_mac_ok(tp, pla)) {
-+			if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
- 				dev_err(&tp->intf->dev,
- 					"check PLA firmware failed\n");
- 				goto fail;
- 			}
-+			__set_bit(FW_FLAGS_PLA, &fw_flags);
- 			break;
- 		case RTL_FW_USB:
--			if (usb) {
-+			if (test_bit(FW_FLAGS_USB, &fw_flags)) {
- 				dev_err(&tp->intf->dev,
- 					"multiple USB firmware encountered");
- 				goto fail;
- 			}
- 
--			usb = (struct fw_mac *)block;
--			if (!rtl8152_is_fw_mac_ok(tp, usb)) {
-+			if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
- 				dev_err(&tp->intf->dev,
- 					"check USB firmware failed\n");
- 				goto fail;
- 			}
-+			__set_bit(FW_FLAGS_USB, &fw_flags);
- 			break;
- 		case RTL_FW_PHY_START:
--			if (start || phy_nc || stop) {
-+			if (test_bit(FW_FLAGS_START, &fw_flags) ||
-+			    test_bit(FW_FLAGS_NC, &fw_flags) ||
-+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
- 				dev_err(&tp->intf->dev,
- 					"check PHY_START fail\n");
- 				goto fail;
- 			}
- 
--			if (__le32_to_cpu(block->length) != sizeof(*start)) {
-+			if (__le32_to_cpu(block->length) != sizeof(struct fw_phy_patch_key)) {
- 				dev_err(&tp->intf->dev,
- 					"Invalid length for PHY_START\n");
- 				goto fail;
- 			}
--
--			start = (struct fw_phy_patch_key *)block;
-+			__set_bit(FW_FLAGS_START, &fw_flags);
- 			break;
- 		case RTL_FW_PHY_STOP:
--			if (stop || !start) {
-+			if (test_bit(FW_FLAGS_STOP, &fw_flags) ||
-+			    !test_bit(FW_FLAGS_START, &fw_flags)) {
- 				dev_err(&tp->intf->dev,
- 					"Check PHY_STOP fail\n");
- 				goto fail;
-@@ -3888,28 +3895,28 @@ static long rtl8152_check_firmware(struc
- 					"Invalid length for PHY_STOP\n");
- 				goto fail;
- 			}
--
--			stop = block;
-+			__set_bit(FW_FLAGS_STOP, &fw_flags);
- 			break;
- 		case RTL_FW_PHY_NC:
--			if (!start || stop) {
-+			if (!test_bit(FW_FLAGS_START, &fw_flags) ||
-+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
- 				dev_err(&tp->intf->dev,
- 					"check PHY_NC fail\n");
- 				goto fail;
- 			}
- 
--			if (phy_nc) {
-+			if (test_bit(FW_FLAGS_NC, &fw_flags)) {
- 				dev_err(&tp->intf->dev,
- 					"multiple PHY NC encountered\n");
- 				goto fail;
- 			}
- 
--			phy_nc = (struct fw_phy_nc *)block;
--			if (!rtl8152_is_fw_phy_nc_ok(tp, phy_nc)) {
-+			if (!rtl8152_is_fw_phy_nc_ok(tp, (struct fw_phy_nc *)block)) {
- 				dev_err(&tp->intf->dev,
- 					"check PHY NC firmware failed\n");
- 				goto fail;
- 			}
-+			__set_bit(FW_FLAGS_NC, &fw_flags);
- 
- 			break;
- 		default:
-@@ -3923,7 +3930,7 @@ static long rtl8152_check_firmware(struc
- 	}
- 
- fw_end:
--	if ((phy_nc || start) && !stop) {
-+	if (test_bit(FW_FLAGS_START, &fw_flags) && !test_bit(FW_FLAGS_STOP, &fw_flags)) {
- 		dev_err(&tp->intf->dev, "without PHY_STOP\n");
- 		goto fail;
- 	}
diff --git a/target/linux/generic/backport-5.10/792-v5.13-r8152-add-help-function-to-change-mtu.patch b/target/linux/generic/backport-5.10/792-v5.13-r8152-add-help-function-to-change-mtu.patch
deleted file mode 100644
index cd7a514b71ff..000000000000
--- a/target/linux/generic/backport-5.10/792-v5.13-r8152-add-help-function-to-change-mtu.patch
+++ /dev/null
@@ -1,157 +0,0 @@
-From f010a7d51cbb42bdb956f0a28b8868b15d7a3816 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 16 Apr 2021 16:04:34 +0800
-Subject: [PATCH] r8152: add help function to change mtu
-
-commit 67ce1a806f164e59a074fea8809725d3411eaa20 upstream.
-
-The different chips may have different requests when changing mtu.
-Therefore, add a new help function of rtl_ops to change mtu. Besides,
-reset the tx/rx after changing mtu.
-
-Additionally, add mtu_to_size() and size_to_mtu() macros to simplify
-the code.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 53 ++++++++++++++++++++++++-----------------
- 1 file changed, 31 insertions(+), 22 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -657,15 +657,13 @@ enum rtl_register_content {
- 
- #define INTR_LINK		0x0004
- 
--#define RTL8153_MAX_PACKET	9216 /* 9K */
--#define RTL8153_MAX_MTU		(RTL8153_MAX_PACKET - VLAN_ETH_HLEN - \
--				 ETH_FCS_LEN)
- #define RTL8152_RMS		(VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
- #define RTL8153_RMS		RTL8153_MAX_PACKET
- #define RTL8152_TX_TIMEOUT	(5 * HZ)
- #define RTL8152_NAPI_WEIGHT	64
--#define rx_reserved_size(x)	((x) + VLAN_ETH_HLEN + ETH_FCS_LEN + \
--				 sizeof(struct rx_desc) + RX_ALIGN)
-+#define mtu_to_size(m)		((m) + VLAN_ETH_HLEN + ETH_FCS_LEN)
-+#define size_to_mtu(s)		((s) - VLAN_ETH_HLEN - ETH_FCS_LEN)
-+#define rx_reserved_size(x)	(mtu_to_size(x) + sizeof(struct rx_desc) + RX_ALIGN)
- 
- /* rtl8152 flags */
- enum rtl8152_flags {
-@@ -795,6 +793,7 @@ struct r8152 {
- 		bool (*in_nway)(struct r8152 *tp);
- 		void (*hw_phy_cfg)(struct r8152 *tp);
- 		void (*autosuspend_en)(struct r8152 *tp, bool enable);
-+		void (*change_mtu)(struct r8152 *tp);
- 	} rtl_ops;
- 
- 	struct ups_info {
-@@ -1021,8 +1020,7 @@ enum tx_csum_stat {
- static const int multicast_filter_limit = 32;
- static unsigned int agg_buf_sz = 16384;
- 
--#define RTL_LIMITED_TSO_SIZE	(agg_buf_sz - sizeof(struct tx_desc) - \
--				 VLAN_ETH_HLEN - ETH_FCS_LEN)
-+#define RTL_LIMITED_TSO_SIZE	(size_to_mtu(agg_buf_sz) - sizeof(struct tx_desc))
- 
- static
- int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
-@@ -2634,10 +2632,7 @@ static void rtl8152_nic_reset(struct r81
- 
- static void set_tx_qlen(struct r8152 *tp)
- {
--	struct net_device *netdev = tp->netdev;
--
--	tp->tx_qlen = agg_buf_sz / (netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN +
--				    sizeof(struct tx_desc));
-+	tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc));
- }
- 
- static inline u8 rtl8152_get_speed(struct r8152 *tp)
-@@ -4726,6 +4721,12 @@ static void r8153b_hw_phy_cfg(struct r81
- 	set_bit(PHY_RESET, &tp->flags);
- }
- 
-+static void rtl8153_change_mtu(struct r8152 *tp)
-+{
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
-+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
-+}
-+
- static void r8153_first_init(struct r8152 *tp)
- {
- 	u32 ocp_data;
-@@ -4758,9 +4759,7 @@ static void r8153_first_init(struct r815
- 
- 	rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
- 
--	ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
--	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
--	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
-+	rtl8153_change_mtu(tp);
- 
- 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
- 	ocp_data |= TCR0_AUTO_FIFO;
-@@ -4795,8 +4794,7 @@ static void r8153_enter_oob(struct r8152
- 
- 	wait_oob_link_list_ready(tp);
- 
--	ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
--	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
- 
- 	switch (tp->version) {
- 	case RTL_VER_03:
-@@ -6497,12 +6495,21 @@ static int rtl8152_change_mtu(struct net
- 	dev->mtu = new_mtu;
- 
- 	if (netif_running(dev)) {
--		u32 rms = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
--
--		ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rms);
-+		if (tp->rtl_ops.change_mtu)
-+			tp->rtl_ops.change_mtu(tp);
- 
--		if (netif_carrier_ok(dev))
--			r8153_set_rx_early_size(tp);
-+		if (netif_carrier_ok(dev)) {
-+			netif_stop_queue(dev);
-+			napi_disable(&tp->napi);
-+			tasklet_disable(&tp->tx_tl);
-+			tp->rtl_ops.disable(tp);
-+			tp->rtl_ops.enable(tp);
-+			rtl_start_rx(tp);
-+			tasklet_enable(&tp->tx_tl);
-+			napi_enable(&tp->napi);
-+			rtl8152_set_rx_mode(dev);
-+			netif_wake_queue(dev);
-+		}
- 	}
- 
- 	mutex_unlock(&tp->control);
-@@ -6591,6 +6598,7 @@ static int rtl_ops_init(struct r8152 *tp
- 		ops->in_nway		= rtl8153_in_nway;
- 		ops->hw_phy_cfg		= r8153_hw_phy_cfg;
- 		ops->autosuspend_en	= rtl8153_runtime_enable;
-+		ops->change_mtu		= rtl8153_change_mtu;
- 		if (tp->udev->speed < USB_SPEED_SUPER)
- 			tp->rx_buf_sz	= 16 * 1024;
- 		else
-@@ -6612,6 +6620,7 @@ static int rtl_ops_init(struct r8152 *tp
- 		ops->in_nway		= rtl8153_in_nway;
- 		ops->hw_phy_cfg		= r8153b_hw_phy_cfg;
- 		ops->autosuspend_en	= rtl8153b_runtime_enable;
-+		ops->change_mtu		= rtl8153_change_mtu;
- 		tp->rx_buf_sz		= 32 * 1024;
- 		tp->eee_en		= true;
- 		tp->eee_adv		= MDIO_EEE_1000T | MDIO_EEE_100TX;
-@@ -6832,7 +6841,7 @@ static int rtl8152_probe(struct usb_inte
- 		netdev->max_mtu = ETH_DATA_LEN;
- 		break;
- 	default:
--		netdev->max_mtu = RTL8153_MAX_MTU;
-+		netdev->max_mtu = size_to_mtu(9 * 1024);
- 		break;
- 	}
- 
diff --git a/target/linux/generic/backport-5.10/793-v5.13-r8152-support-new-chips.patch b/target/linux/generic/backport-5.10/793-v5.13-r8152-support-new-chips.patch
deleted file mode 100644
index 153322956437..000000000000
--- a/target/linux/generic/backport-5.10/793-v5.13-r8152-support-new-chips.patch
+++ /dev/null
@@ -1,2886 +0,0 @@
-From e7439e7fd384f55f55837f7e4866e74d8dca3827 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 16 Apr 2021 16:04:35 +0800
-Subject: [PATCH] r8152: support new chips
-
-commit 195aae321c829dd1945900d75561e6aa79cce208 upstream.
-
-Support RTL8153C, RTL8153D, RTL8156A, and RTL8156B. The RTL8156A
-and RTL8156B are the 2.5G ethernet.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 2634 +++++++++++++++++++++++++++++++++++----
- 1 file changed, 2359 insertions(+), 275 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -43,10 +43,14 @@
- 
- #define PLA_IDR			0xc000
- #define PLA_RCR			0xc010
-+#define PLA_RCR1		0xc012
- #define PLA_RMS			0xc016
- #define PLA_RXFIFO_CTRL0	0xc0a0
-+#define PLA_RXFIFO_FULL		0xc0a2
- #define PLA_RXFIFO_CTRL1	0xc0a4
-+#define PLA_RX_FIFO_FULL	0xc0a6
- #define PLA_RXFIFO_CTRL2	0xc0a8
-+#define PLA_RX_FIFO_EMPTY	0xc0aa
- #define PLA_DMY_REG0		0xc0b0
- #define PLA_FMC			0xc0b4
- #define PLA_CFG_WOL		0xc0b6
-@@ -63,6 +67,8 @@
- #define PLA_MACDBG_PRE		0xd38c	/* RTL_VER_04 only */
- #define PLA_MACDBG_POST		0xd38e	/* RTL_VER_04 only */
- #define PLA_EXTRA_STATUS	0xd398
-+#define PLA_GPHY_CTRL		0xd3ae
-+#define PLA_POL_GPIO_CTRL	0xdc6a
- #define PLA_EFUSE_DATA		0xdd00
- #define PLA_EFUSE_CMD		0xdd02
- #define PLA_LEDSEL		0xdd90
-@@ -72,6 +78,8 @@
- #define PLA_LWAKE_CTRL_REG	0xe007
- #define PLA_GPHY_INTR_IMR	0xe022
- #define PLA_EEE_CR		0xe040
-+#define PLA_EEE_TXTWSYS		0xe04c
-+#define PLA_EEE_TXTWSYS_2P5G	0xe058
- #define PLA_EEEP_CR		0xe080
- #define PLA_MAC_PWR_CTRL	0xe0c0
- #define PLA_MAC_PWR_CTRL2	0xe0ca
-@@ -82,6 +90,7 @@
- #define PLA_TCR1		0xe612
- #define PLA_MTPS		0xe615
- #define PLA_TXFIFO_CTRL		0xe618
-+#define PLA_TXFIFO_FULL		0xe61a
- #define PLA_RSTTALLY		0xe800
- #define PLA_CR			0xe813
- #define PLA_CRWECR		0xe81c
-@@ -98,6 +107,7 @@
- #define PLA_SFF_STS_7		0xe8de
- #define PLA_PHYSTATUS		0xe908
- #define PLA_CONFIG6		0xe90a /* CONFIG6 */
-+#define PLA_USB_CFG		0xe952
- #define PLA_BP_BA		0xfc26
- #define PLA_BP_0		0xfc28
- #define PLA_BP_1		0xfc2a
-@@ -112,6 +122,7 @@
- #define USB_USB2PHY		0xb41e
- #define USB_SSPHYLINK1		0xb426
- #define USB_SSPHYLINK2		0xb428
-+#define USB_L1_CTRL		0xb45e
- #define USB_U2P3_CTRL		0xb460
- #define USB_CSR_DUMMY1		0xb464
- #define USB_CSR_DUMMY2		0xb466
-@@ -122,7 +133,12 @@
- #define USB_FW_FIX_EN0		0xcfca
- #define USB_FW_FIX_EN1		0xcfcc
- #define USB_LPM_CONFIG		0xcfd8
-+#define USB_ECM_OPTION		0xcfee
- #define USB_CSTMR		0xcfef	/* RTL8153A */
-+#define USB_MISC_2		0xcfff
-+#define USB_ECM_OP		0xd26b
-+#define USB_GPHY_CTRL		0xd284
-+#define USB_SPEED_OPTION	0xd32a
- #define USB_FW_CTRL		0xd334	/* RTL8153B */
- #define USB_FC_TIMER		0xd340
- #define USB_USB_CTRL		0xd406
-@@ -136,16 +152,20 @@
- #define USB_RX_EXTRA_AGGR_TMR	0xd432	/* RTL8153B */
- #define USB_TX_DMA		0xd434
- #define USB_UPT_RXDMA_OWN	0xd437
-+#define USB_UPHY3_MDCMDIO	0xd480
- #define USB_TOLERANCE		0xd490
- #define USB_LPM_CTRL		0xd41a
- #define USB_BMU_RESET		0xd4b0
-+#define USB_BMU_CONFIG		0xd4b4
- #define USB_U1U2_TIMER		0xd4da
- #define USB_FW_TASK		0xd4e8	/* RTL8153B */
-+#define USB_RX_AGGR_NUM		0xd4ee
- #define USB_UPS_CTRL		0xd800
- #define USB_POWER_CUT		0xd80a
- #define USB_MISC_0		0xd81a
- #define USB_MISC_1		0xd81f
- #define USB_AFE_CTRL2		0xd824
-+#define USB_UPHY_XTAL		0xd826
- #define USB_UPS_CFG		0xd842
- #define USB_UPS_FLAGS		0xd848
- #define USB_WDT1_CTRL		0xe404
-@@ -188,6 +208,9 @@
- #define OCP_EEE_ABLE		0xa5c4
- #define OCP_EEE_ADV		0xa5d0
- #define OCP_EEE_LPABLE		0xa5d2
-+#define OCP_10GBT_CTRL		0xa5d4
-+#define OCP_10GBT_STAT		0xa5d6
-+#define OCP_EEE_ADV2		0xa6d4
- #define OCP_PHY_STATE		0xa708		/* nway state for 8153 */
- #define OCP_PHY_PATCH_STAT	0xb800
- #define OCP_PHY_PATCH_CMD	0xb820
-@@ -199,6 +222,7 @@
- /* SRAM Register */
- #define SRAM_GREEN_CFG		0x8011
- #define SRAM_LPF_CFG		0x8012
-+#define SRAM_GPHY_FW_VER	0x801e
- #define SRAM_10M_AMP1		0x8080
- #define SRAM_10M_AMP2		0x8082
- #define SRAM_IMPEDANCE		0x8084
-@@ -210,11 +234,19 @@
- #define RCR_AM			0x00000004
- #define RCR_AB			0x00000008
- #define RCR_ACPT_ALL		(RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
-+#define SLOT_EN			BIT(11)
-+
-+/* PLA_RCR1 */
-+#define OUTER_VLAN		BIT(7)
-+#define INNER_VLAN		BIT(6)
- 
- /* PLA_RXFIFO_CTRL0 */
- #define RXFIFO_THR1_NORMAL	0x00080002
- #define RXFIFO_THR1_OOB		0x01800003
- 
-+/* PLA_RXFIFO_FULL */
-+#define RXFIFO_FULL_MASK	0xfff
-+
- /* PLA_RXFIFO_CTRL1 */
- #define RXFIFO_THR2_FULL	0x00000060
- #define RXFIFO_THR2_HIGH	0x00000038
-@@ -285,6 +317,7 @@
- #define MCU_BORW_EN		0x4000
- 
- /* PLA_CPCR */
-+#define FLOW_CTRL_EN		BIT(0)
- #define CPCR_RX_VLAN		0x0040
- 
- /* PLA_CFG_WOL */
-@@ -310,6 +343,10 @@
- /* PLA_CONFIG6 */
- #define LANWAKE_CLR_EN		BIT(0)
- 
-+/* PLA_USB_CFG */
-+#define EN_XG_LIP		BIT(1)
-+#define EN_G_LIP		BIT(2)
-+
- /* PLA_CONFIG5 */
- #define BWF_EN			0x0040
- #define MWF_EN			0x0020
-@@ -333,6 +370,7 @@
- /* PLA_MAC_PWR_CTRL2 */
- #define EEE_SPDWN_RATIO		0x8007
- #define MAC_CLK_SPDWN_EN	BIT(15)
-+#define EEE_SPDWN_RATIO_MASK	0xff
- 
- /* PLA_MAC_PWR_CTRL3 */
- #define PLA_MCU_SPDWN_EN	BIT(14)
-@@ -345,6 +383,7 @@
- #define PWRSAVE_SPDWN_EN	0x1000
- #define RXDV_SPDWN_EN		0x0800
- #define TX10MIDLE_EN		0x0100
-+#define IDLE_SPDWN_EN		BIT(6)
- #define TP100_SPDWN_EN		0x0020
- #define TP500_SPDWN_EN		0x0010
- #define TP1000_SPDWN_EN		0x0008
-@@ -385,6 +424,13 @@
- #define LINK_CHANGE_FLAG	BIT(8)
- #define POLL_LINK_CHG		BIT(0)
- 
-+/* PLA_GPHY_CTRL */
-+#define GPHY_FLASH		BIT(1)
-+
-+/* PLA_POL_GPIO_CTRL */
-+#define DACK_DET_EN		BIT(15)
-+#define POL_GPHY_PATCH		BIT(4)
-+
- /* USB_USB2PHY */
- #define USB2PHY_SUSPEND		0x0001
- #define USB2PHY_L1		0x0002
-@@ -433,6 +479,9 @@
- #define BMU_RESET_EP_IN		0x01
- #define BMU_RESET_EP_OUT	0x02
- 
-+/* USB_BMU_CONFIG */
-+#define ACT_ODMA		BIT(1)
-+
- /* USB_UPT_RXDMA_OWN */
- #define OWN_UPDATE		BIT(0)
- #define OWN_CLEAR		BIT(1)
-@@ -440,27 +489,52 @@
- /* USB_FW_TASK */
- #define FC_PATCH_TASK		BIT(1)
- 
-+/* USB_RX_AGGR_NUM */
-+#define RX_AGGR_NUM_MASK	0x1ff
-+
- /* USB_UPS_CTRL */
- #define POWER_CUT		0x0100
- 
- /* USB_PM_CTRL_STATUS */
- #define RESUME_INDICATE		0x0001
- 
-+/* USB_ECM_OPTION */
-+#define BYPASS_MAC_RESET	BIT(5)
-+
- /* USB_CSTMR */
- #define FORCE_SUPER		BIT(0)
- 
-+/* USB_MISC_2 */
-+#define UPS_FORCE_PWR_DOWN	BIT(0)
-+
-+/* USB_ECM_OP */
-+#define	EN_ALL_SPEED		BIT(0)
-+
-+/* USB_GPHY_CTRL */
-+#define GPHY_PATCH_DONE		BIT(2)
-+#define BYPASS_FLASH		BIT(5)
-+#define BACKUP_RESTRORE		BIT(6)
-+
-+/* USB_SPEED_OPTION */
-+#define RG_PWRDN_EN		BIT(8)
-+#define ALL_SPEED_OFF		BIT(9)
-+
- /* USB_FW_CTRL */
- #define FLOW_CTRL_PATCH_OPT	BIT(1)
-+#define AUTO_SPEEDUP		BIT(3)
-+#define FLOW_CTRL_PATCH_2	BIT(8)
- 
- /* USB_FC_TIMER */
- #define CTRL_TIMER_EN		BIT(15)
- 
- /* USB_USB_CTRL */
-+#define CDC_ECM_EN		BIT(3)
- #define RX_AGG_DISABLE		0x0010
- #define RX_ZERO_EN		0x0080
- 
- /* USB_U2P3_CTRL */
- #define U2P3_ENABLE		0x0001
-+#define RX_DETECT8		BIT(3)
- 
- /* USB_POWER_CUT */
- #define PWR_EN			0x0001
-@@ -496,8 +570,12 @@
- #define SEN_VAL_NORMAL		0xa000
- #define SEL_RXIDLE		0x0100
- 
-+/* USB_UPHY_XTAL */
-+#define OOBS_POLLING		BIT(8)
-+
- /* USB_UPS_CFG */
- #define SAW_CNT_1MS_MASK	0x0fff
-+#define MID_REVERSE		BIT(5)	/* RTL8156A */
- 
- /* USB_UPS_FLAGS */
- #define UPS_FLAGS_R_TUNE		BIT(0)
-@@ -505,6 +583,7 @@
- #define UPS_FLAGS_250M_CKDIV		BIT(2)
- #define UPS_FLAGS_EN_ALDPS		BIT(3)
- #define UPS_FLAGS_CTAP_SHORT_DIS	BIT(4)
-+#define UPS_FLAGS_SPEED_MASK		(0xf << 16)
- #define ups_flags_speed(x)		((x) << 16)
- #define UPS_FLAGS_EN_EEE		BIT(20)
- #define UPS_FLAGS_EN_500M_EEE		BIT(21)
-@@ -525,6 +604,8 @@ enum spd_duplex {
- 	FORCE_10M_FULL,
- 	FORCE_100M_HALF,
- 	FORCE_100M_FULL,
-+	FORCE_1000M_FULL,
-+	NWAY_2500M_FULL,
- };
- 
- /* OCP_ALDPS_CONFIG */
-@@ -589,6 +670,9 @@ enum spd_duplex {
- #define EN_10M_CLKDIV		BIT(11)
- #define EN_10M_BGOFF		0x0080
- 
-+/* OCP_10GBT_CTRL */
-+#define RTL_ADV2_5G_F_R		BIT(5)	/* Advertise 2.5GBASE-T fast-retrain */
-+
- /* OCP_PHY_STATE */
- #define TXDIS_STATE		0x01
- #define ABD_STATE		0x02
-@@ -608,7 +692,8 @@ enum spd_duplex {
- #define EN_EMI_L		0x0040
- 
- /* OCP_SYSCLK_CFG */
--#define clk_div_expo(x)		(min(x, 5) << 8)
-+#define sysclk_div_expo(x)	(min(x, 5) << 8)
-+#define clk_div_expo(x)		(min(x, 5) << 4)
- 
- /* SRAM_GREEN_CFG */
- #define GREEN_ETH_EN		BIT(15)
-@@ -639,6 +724,11 @@ enum spd_duplex {
- #define BP4_SUPER_ONLY		0x1578	/* RTL_VER_04 only */
- 
- enum rtl_register_content {
-+	_2500bps	= BIT(10),
-+	_1250bps	= BIT(9),
-+	_500bps		= BIT(8),
-+	_tx_flow	= BIT(6),
-+	_rx_flow	= BIT(5),
- 	_1000bps	= 0x10,
- 	_100bps		= 0x08,
- 	_10bps		= 0x04,
-@@ -646,6 +736,9 @@ enum rtl_register_content {
- 	FULL_DUP	= 0x01,
- };
- 
-+#define is_speed_2500(_speed)	(((_speed) & (_2500bps | LINK_STATUS)) == (_2500bps | LINK_STATUS))
-+#define is_flow_control(_speed)	(((_speed) & (_tx_flow | _rx_flow)) == (_tx_flow | _rx_flow))
-+
- #define RTL8152_MAX_TX		4
- #define RTL8152_MAX_RX		10
- #define INTBUFSIZE		2
-@@ -660,7 +753,6 @@ enum rtl_register_content {
- #define RTL8152_RMS		(VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
- #define RTL8153_RMS		RTL8153_MAX_PACKET
- #define RTL8152_TX_TIMEOUT	(5 * HZ)
--#define RTL8152_NAPI_WEIGHT	64
- #define mtu_to_size(m)		((m) + VLAN_ETH_HLEN + ETH_FCS_LEN)
- #define size_to_mtu(s)		((s) - VLAN_ETH_HLEN - ETH_FCS_LEN)
- #define rx_reserved_size(x)	(mtu_to_size(x) + sizeof(struct rx_desc) + RX_ALIGN)
-@@ -797,6 +889,7 @@ struct r8152 {
- 	} rtl_ops;
- 
- 	struct ups_info {
-+		u32 r_tune:1;
- 		u32 _10m_ckdiv:1;
- 		u32 _250m_ckdiv:1;
- 		u32 aldps:1;
-@@ -838,7 +931,9 @@ struct r8152 {
- 	u32 rx_buf_sz;
- 	u32 rx_copybreak;
- 	u32 rx_pending;
-+	u32 fc_pause_on, fc_pause_off;
- 
-+	u32 support_2500full:1;
- 	u16 ocp_base;
- 	u16 speed;
- 	u16 eee_adv;
-@@ -998,6 +1093,15 @@ enum rtl_version {
- 	RTL_VER_07,
- 	RTL_VER_08,
- 	RTL_VER_09,
-+
-+	RTL_TEST_01,
-+	RTL_VER_10,
-+	RTL_VER_11,
-+	RTL_VER_12,
-+	RTL_VER_13,
-+	RTL_VER_14,
-+	RTL_VER_15,
-+
- 	RTL_VER_MAX
- };
- 
-@@ -1013,6 +1117,7 @@ enum tx_csum_stat {
- #define RTL_ADVERTISED_100_FULL			BIT(3)
- #define RTL_ADVERTISED_1000_HALF		BIT(4)
- #define RTL_ADVERTISED_1000_FULL		BIT(5)
-+#define RTL_ADVERTISED_2500_FULL		BIT(6)
- 
- /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
-  * The RTL chips use a 64 element hash table based on the Ethernet CRC.
-@@ -2608,7 +2713,7 @@ static netdev_tx_t rtl8152_start_xmit(st
- 
- static void r8152b_reset_packet_filter(struct r8152 *tp)
- {
--	u32	ocp_data;
-+	u32 ocp_data;
- 
- 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
- 	ocp_data &= ~FMC_FCR_MCU_EN;
-@@ -2619,14 +2724,47 @@ static void r8152b_reset_packet_filter(s
- 
- static void rtl8152_nic_reset(struct r8152 *tp)
- {
--	int	i;
-+	u32 ocp_data;
-+	int i;
- 
--	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
-+	switch (tp->version) {
-+	case RTL_TEST_01:
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
-+		ocp_data &= ~CR_TE;
-+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
-+
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET);
-+		ocp_data &= ~BMU_RESET_EP_IN;
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
-+
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-+		ocp_data |= CDC_ECM_EN;
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
-+		ocp_data &= ~CR_RE;
-+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
-+
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET);
-+		ocp_data |= BMU_RESET_EP_IN;
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
-+
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-+		ocp_data &= ~CDC_ECM_EN;
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+		break;
- 
--	for (i = 0; i < 1000; i++) {
--		if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
--			break;
--		usleep_range(100, 400);
-+	default:
-+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
-+
-+		for (i = 0; i < 1000; i++) {
-+			if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
-+				break;
-+			usleep_range(100, 400);
-+		}
-+		break;
- 	}
- }
- 
-@@ -2635,9 +2773,9 @@ static void set_tx_qlen(struct r8152 *tp
- 	tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc));
- }
- 
--static inline u8 rtl8152_get_speed(struct r8152 *tp)
-+static inline u16 rtl8152_get_speed(struct r8152 *tp)
- {
--	return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
-+	return ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
- }
- 
- static void rtl_eee_plus_en(struct r8152 *tp, bool enable)
-@@ -2797,6 +2935,7 @@ static int rtl_enable(struct r8152 *tp)
- 	switch (tp->version) {
- 	case RTL_VER_08:
- 	case RTL_VER_09:
-+	case RTL_VER_14:
- 		r8153b_rx_agg_chg_indicate(tp);
- 		break;
- 	default:
-@@ -2834,6 +2973,7 @@ static void r8153_set_rx_early_timeout(s
- 
- 	case RTL_VER_08:
- 	case RTL_VER_09:
-+	case RTL_VER_14:
- 		/* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout
- 		 * primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns.
- 		 */
-@@ -2843,6 +2983,18 @@ static void r8153_set_rx_early_timeout(s
- 			       ocp_data);
- 		break;
- 
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+	case RTL_VER_12:
-+	case RTL_VER_13:
-+	case RTL_VER_15:
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
-+			       640 / 8);
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR,
-+			       ocp_data);
-+		r8153b_rx_agg_chg_indicate(tp);
-+		break;
-+
- 	default:
- 		break;
- 	}
-@@ -2862,8 +3014,19 @@ static void r8153_set_rx_early_size(stru
- 		break;
- 	case RTL_VER_08:
- 	case RTL_VER_09:
-+	case RTL_VER_14:
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
-+			       ocp_data / 8);
-+		break;
-+	case RTL_TEST_01:
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+	case RTL_VER_12:
-+	case RTL_VER_13:
-+	case RTL_VER_15:
- 		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
- 			       ocp_data / 8);
-+		r8153b_rx_agg_chg_indicate(tp);
- 		break;
- 	default:
- 		WARN_ON_ONCE(1);
-@@ -2873,6 +3036,8 @@ static void r8153_set_rx_early_size(stru
- 
- static int rtl8153_enable(struct r8152 *tp)
- {
-+	u32 ocp_data;
-+
- 	if (test_bit(RTL8152_UNPLUG, &tp->flags))
- 		return -ENODEV;
- 
-@@ -2883,15 +3048,18 @@ static int rtl8153_enable(struct r8152 *
- 
- 	rtl_set_ifg(tp, rtl8152_get_speed(tp));
- 
--	if (tp->version == RTL_VER_09) {
--		u32 ocp_data;
--
-+	switch (tp->version) {
-+	case RTL_VER_09:
-+	case RTL_VER_14:
- 		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
- 		ocp_data &= ~FC_PATCH_TASK;
- 		ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
- 		usleep_range(1000, 2000);
- 		ocp_data |= FC_PATCH_TASK;
- 		ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
-+		break;
-+	default:
-+		break;
- 	}
- 
- 	return rtl_enable(tp);
-@@ -2956,12 +3124,40 @@ static void rtl_rx_vlan_en(struct r8152
- {
- 	u32 ocp_data;
- 
--	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
--	if (enable)
--		ocp_data |= CPCR_RX_VLAN;
--	else
--		ocp_data &= ~CPCR_RX_VLAN;
--	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
-+	switch (tp->version) {
-+	case RTL_VER_01:
-+	case RTL_VER_02:
-+	case RTL_VER_03:
-+	case RTL_VER_04:
-+	case RTL_VER_05:
-+	case RTL_VER_06:
-+	case RTL_VER_07:
-+	case RTL_VER_08:
-+	case RTL_VER_09:
-+	case RTL_VER_14:
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
-+		if (enable)
-+			ocp_data |= CPCR_RX_VLAN;
-+		else
-+			ocp_data &= ~CPCR_RX_VLAN;
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
-+		break;
-+
-+	case RTL_TEST_01:
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+	case RTL_VER_12:
-+	case RTL_VER_13:
-+	case RTL_VER_15:
-+	default:
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR1);
-+		if (enable)
-+			ocp_data |= OUTER_VLAN | INNER_VLAN;
-+		else
-+			ocp_data &= ~(OUTER_VLAN | INNER_VLAN);
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR1, ocp_data);
-+		break;
-+	}
- }
- 
- static int rtl8152_set_features(struct net_device *dev,
-@@ -3054,6 +3250,40 @@ static void __rtl_set_wol(struct r8152 *
- 		device_set_wakeup_enable(&tp->udev->dev, false);
- }
- 
-+static void r8153_mac_clk_speed_down(struct r8152 *tp, bool enable)
-+{
-+	u32 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
-+
-+	/* MAC clock speed down */
-+	if (enable)
-+		ocp_data |= MAC_CLK_SPDWN_EN;
-+	else
-+		ocp_data &= ~MAC_CLK_SPDWN_EN;
-+
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
-+}
-+
-+static void r8156_mac_clk_spd(struct r8152 *tp, bool enable)
-+{
-+	u32 ocp_data;
-+
-+	/* MAC clock speed down */
-+	if (enable) {
-+		/* aldps_spdwn_ratio, tp10_spdwn_ratio */
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL,
-+			       0x0403);
-+
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
-+		ocp_data &= ~EEE_SPDWN_RATIO_MASK;
-+		ocp_data |= MAC_CLK_SPDWN_EN | 0x03; /* eee_spdwn_ratio */
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
-+	} else {
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
-+		ocp_data &= ~MAC_CLK_SPDWN_EN;
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
-+	}
-+}
-+
- static void r8153_u1u2en(struct r8152 *tp, bool enable)
- {
- 	u8 u1u2[8];
-@@ -3113,6 +3343,9 @@ static void r8153b_ups_flags(struct r815
- 	if (tp->ups_info.eee_cmod_lv)
- 		ups_flags |= UPS_FLAGS_EEE_CMOD_LV_EN;
- 
-+	if (tp->ups_info.r_tune)
-+		ups_flags |= UPS_FLAGS_R_TUNE;
-+
- 	if (tp->ups_info._10m_ckdiv)
- 		ups_flags |= UPS_FLAGS_EN_10M_CKDIV;
- 
-@@ -3163,6 +3396,88 @@ static void r8153b_ups_flags(struct r815
- 	ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
- }
- 
-+static void r8156_ups_flags(struct r8152 *tp)
-+{
-+	u32 ups_flags = 0;
-+
-+	if (tp->ups_info.green)
-+		ups_flags |= UPS_FLAGS_EN_GREEN;
-+
-+	if (tp->ups_info.aldps)
-+		ups_flags |= UPS_FLAGS_EN_ALDPS;
-+
-+	if (tp->ups_info.eee)
-+		ups_flags |= UPS_FLAGS_EN_EEE;
-+
-+	if (tp->ups_info.flow_control)
-+		ups_flags |= UPS_FLAGS_EN_FLOW_CTR;
-+
-+	if (tp->ups_info.eee_ckdiv)
-+		ups_flags |= UPS_FLAGS_EN_EEE_CKDIV;
-+
-+	if (tp->ups_info._10m_ckdiv)
-+		ups_flags |= UPS_FLAGS_EN_10M_CKDIV;
-+
-+	if (tp->ups_info.eee_plloff_100)
-+		ups_flags |= UPS_FLAGS_EEE_PLLOFF_100;
-+
-+	if (tp->ups_info.eee_plloff_giga)
-+		ups_flags |= UPS_FLAGS_EEE_PLLOFF_GIGA;
-+
-+	if (tp->ups_info._250m_ckdiv)
-+		ups_flags |= UPS_FLAGS_250M_CKDIV;
-+
-+	switch (tp->ups_info.speed_duplex) {
-+	case FORCE_10M_HALF:
-+		ups_flags |= ups_flags_speed(0);
-+		break;
-+	case FORCE_10M_FULL:
-+		ups_flags |= ups_flags_speed(1);
-+		break;
-+	case FORCE_100M_HALF:
-+		ups_flags |= ups_flags_speed(2);
-+		break;
-+	case FORCE_100M_FULL:
-+		ups_flags |= ups_flags_speed(3);
-+		break;
-+	case NWAY_10M_HALF:
-+		ups_flags |= ups_flags_speed(4);
-+		break;
-+	case NWAY_10M_FULL:
-+		ups_flags |= ups_flags_speed(5);
-+		break;
-+	case NWAY_100M_HALF:
-+		ups_flags |= ups_flags_speed(6);
-+		break;
-+	case NWAY_100M_FULL:
-+		ups_flags |= ups_flags_speed(7);
-+		break;
-+	case NWAY_1000M_FULL:
-+		ups_flags |= ups_flags_speed(8);
-+		break;
-+	case NWAY_2500M_FULL:
-+		ups_flags |= ups_flags_speed(9);
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	switch (tp->ups_info.lite_mode) {
-+	case 1:
-+		ups_flags |= 0 << 5;
-+		break;
-+	case 2:
-+		ups_flags |= 2 << 5;
-+		break;
-+	case 0:
-+	default:
-+		ups_flags |= 1 << 5;
-+		break;
-+	}
-+
-+	ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
-+}
-+
- static void rtl_green_en(struct r8152 *tp, bool enable)
- {
- 	u16 data;
-@@ -3226,16 +3541,16 @@ static void r8153b_ups_en(struct r8152 *
- 		ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
- 		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
- 
--		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff);
--		ocp_data |= BIT(0);
--		ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
-+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+		ocp_data |= UPS_FORCE_PWR_DOWN;
-+		ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
- 	} else {
- 		ocp_data &= ~(UPS_EN | USP_PREWAKE);
- 		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
- 
--		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff);
--		ocp_data &= ~BIT(0);
--		ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
-+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+		ocp_data &= ~UPS_FORCE_PWR_DOWN;
-+		ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
- 
- 		if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
- 			int i;
-@@ -3255,6 +3570,95 @@ static void r8153b_ups_en(struct r8152 *
- 	}
- }
- 
-+static void r8153c_ups_en(struct r8152 *tp, bool enable)
-+{
-+	u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
-+
-+	if (enable) {
-+		r8153b_ups_flags(tp);
-+
-+		ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
-+		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-+
-+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+		ocp_data |= UPS_FORCE_PWR_DOWN;
-+		ocp_data &= ~BIT(7);
-+		ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
-+	} else {
-+		ocp_data &= ~(UPS_EN | USP_PREWAKE);
-+		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-+
-+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+		ocp_data &= ~UPS_FORCE_PWR_DOWN;
-+		ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
-+
-+		if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
-+			int i;
-+
-+			for (i = 0; i < 500; i++) {
-+				if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
-+				    AUTOLOAD_DONE)
-+					break;
-+				msleep(20);
-+			}
-+
-+			tp->rtl_ops.hw_phy_cfg(tp);
-+
-+			rtl8152_set_speed(tp, tp->autoneg, tp->speed,
-+					  tp->duplex, tp->advertising);
-+		}
-+
-+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
-+
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
-+		ocp_data |= BIT(8);
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
-+
-+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
-+	}
-+}
-+
-+static void r8156_ups_en(struct r8152 *tp, bool enable)
-+{
-+	u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
-+
-+	if (enable) {
-+		r8156_ups_flags(tp);
-+
-+		ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
-+		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-+
-+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+		ocp_data |= UPS_FORCE_PWR_DOWN;
-+		ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
-+
-+		switch (tp->version) {
-+		case RTL_VER_13:
-+		case RTL_VER_15:
-+			ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPHY_XTAL);
-+			ocp_data &= ~OOBS_POLLING;
-+			ocp_write_byte(tp, MCU_TYPE_USB, USB_UPHY_XTAL, ocp_data);
-+			break;
-+		default:
-+			break;
-+		}
-+	} else {
-+		ocp_data &= ~(UPS_EN | USP_PREWAKE);
-+		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-+
-+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+		ocp_data &= ~UPS_FORCE_PWR_DOWN;
-+		ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
-+
-+		if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
-+			tp->rtl_ops.hw_phy_cfg(tp);
-+
-+			rtl8152_set_speed(tp, tp->autoneg, tp->speed,
-+					  tp->duplex, tp->advertising);
-+		}
-+	}
-+}
-+
- static void r8153_power_cut_en(struct r8152 *tp, bool enable)
- {
- 	u32 ocp_data;
-@@ -3384,6 +3788,38 @@ static void rtl8153b_runtime_enable(stru
- 	}
- }
- 
-+static void rtl8153c_runtime_enable(struct r8152 *tp, bool enable)
-+{
-+	if (enable) {
-+		r8153_queue_wake(tp, true);
-+		r8153b_u1u2en(tp, false);
-+		r8153_u2p3en(tp, false);
-+		rtl_runtime_suspend_enable(tp, true);
-+		r8153c_ups_en(tp, true);
-+	} else {
-+		r8153c_ups_en(tp, false);
-+		r8153_queue_wake(tp, false);
-+		rtl_runtime_suspend_enable(tp, false);
-+		r8153b_u1u2en(tp, true);
-+	}
-+}
-+
-+static void rtl8156_runtime_enable(struct r8152 *tp, bool enable)
-+{
-+	if (enable) {
-+		r8153_queue_wake(tp, true);
-+		r8153b_u1u2en(tp, false);
-+		r8153_u2p3en(tp, false);
-+		rtl_runtime_suspend_enable(tp, true);
-+	} else {
-+		r8153_queue_wake(tp, false);
-+		rtl_runtime_suspend_enable(tp, false);
-+		r8153_u2p3en(tp, true);
-+		if (tp->udev->speed >= USB_SPEED_SUPER)
-+			r8153b_u1u2en(tp, true);
-+	}
-+}
-+
- static void r8153_teredo_off(struct r8152 *tp)
- {
- 	u32 ocp_data;
-@@ -3404,14 +3840,19 @@ static void r8153_teredo_off(struct r815
- 
- 	case RTL_VER_08:
- 	case RTL_VER_09:
-+	case RTL_TEST_01:
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+	case RTL_VER_12:
-+	case RTL_VER_13:
-+	case RTL_VER_14:
-+	case RTL_VER_15:
-+	default:
- 		/* The bit 0 ~ 7 are relative with teredo settings. They are
- 		 * W1C (write 1 to clear), so set all 1 to disable it.
- 		 */
- 		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, 0xff);
- 		break;
--
--	default:
--		break;
- 	}
- 
- 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
-@@ -3446,6 +3887,12 @@ static void rtl_clear_bp(struct r8152 *t
- 		break;
- 	case RTL_VER_08:
- 	case RTL_VER_09:
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+	case RTL_VER_12:
-+	case RTL_VER_13:
-+	case RTL_VER_14:
-+	case RTL_VER_15:
- 	default:
- 		if (type == MCU_TYPE_USB) {
- 			ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
-@@ -3655,6 +4102,11 @@ static bool rtl8152_is_fw_mac_ok(struct
- 		case RTL_VER_06:
- 		case RTL_VER_08:
- 		case RTL_VER_09:
-+		case RTL_VER_11:
-+		case RTL_VER_12:
-+		case RTL_VER_13:
-+		case RTL_VER_14:
-+		case RTL_VER_15:
- 			fw_reg = 0xf800;
- 			bp_ba_addr = PLA_BP_BA;
- 			bp_en_addr = PLA_BP_EN;
-@@ -3678,6 +4130,11 @@ static bool rtl8152_is_fw_mac_ok(struct
- 			break;
- 		case RTL_VER_08:
- 		case RTL_VER_09:
-+		case RTL_VER_11:
-+		case RTL_VER_12:
-+		case RTL_VER_13:
-+		case RTL_VER_14:
-+		case RTL_VER_15:
- 			fw_reg = 0xe600;
- 			bp_ba_addr = USB_BP_BA;
- 			bp_en_addr = USB_BP2_EN;
-@@ -4217,6 +4674,22 @@ static void r8153_eee_en(struct r8152 *t
- 	tp->ups_info.eee = enable;
- }
- 
-+static void r8156_eee_en(struct r8152 *tp, bool enable)
-+{
-+	u16 config;
-+
-+	r8153_eee_en(tp, enable);
-+
-+	config = ocp_reg_read(tp, OCP_EEE_ADV2);
-+
-+	if (enable)
-+		config |= MDIO_EEE_2_5GT;
-+	else
-+		config &= ~MDIO_EEE_2_5GT;
-+
-+	ocp_reg_write(tp, OCP_EEE_ADV2, config);
-+}
-+
- static void rtl_eee_enable(struct r8152 *tp, bool enable)
- {
- 	switch (tp->version) {
-@@ -4238,6 +4711,7 @@ static void rtl_eee_enable(struct r8152
- 	case RTL_VER_06:
- 	case RTL_VER_08:
- 	case RTL_VER_09:
-+	case RTL_VER_14:
- 		if (enable) {
- 			r8153_eee_en(tp, true);
- 			ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
-@@ -4246,6 +4720,19 @@ static void rtl_eee_enable(struct r8152
- 			ocp_reg_write(tp, OCP_EEE_ADV, 0);
- 		}
- 		break;
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+	case RTL_VER_12:
-+	case RTL_VER_13:
-+	case RTL_VER_15:
-+		if (enable) {
-+			r8156_eee_en(tp, true);
-+			ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
-+		} else {
-+			r8156_eee_en(tp, false);
-+			ocp_reg_write(tp, OCP_EEE_ADV, 0);
-+		}
-+		break;
- 	default:
- 		break;
- 	}
-@@ -4292,6 +4779,20 @@ static void wait_oob_link_list_ready(str
- 	}
- }
- 
-+static void r8156b_wait_loading_flash(struct r8152 *tp)
-+{
-+	if ((ocp_read_word(tp, MCU_TYPE_PLA, PLA_GPHY_CTRL) & GPHY_FLASH) &&
-+	    !(ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & BYPASS_FLASH)) {
-+		int i;
-+
-+		for (i = 0; i < 100; i++) {
-+			if (ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & GPHY_PATCH_DONE)
-+				break;
-+			usleep_range(1000, 2000);
-+		}
-+	}
-+}
-+
- static void r8152b_exit_oob(struct r8152 *tp)
- {
- 	u32 ocp_data;
-@@ -4342,7 +4843,7 @@ static void r8152b_exit_oob(struct r8152
- 	}
- 
- 	/* TX share fifo free credit full threshold */
--	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL);
-+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
- 
- 	ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
- 	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH);
-@@ -4519,6 +5020,21 @@ static int r8153b_post_firmware_1(struct
- 	return 0;
- }
- 
-+static int r8153c_post_firmware_1(struct r8152 *tp)
-+{
-+	u32 ocp_data;
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
-+	ocp_data |= FLOW_CTRL_PATCH_2;
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
-+	ocp_data |= FC_PATCH_TASK;
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
-+
-+	return 0;
-+}
-+
- static void r8153_aldps_en(struct r8152 *tp, bool enable)
- {
- 	u16 data;
-@@ -4721,6 +5237,13 @@ static void r8153b_hw_phy_cfg(struct r81
- 	set_bit(PHY_RESET, &tp->flags);
- }
- 
-+static void r8153c_hw_phy_cfg(struct r8152 *tp)
-+{
-+	r8153b_hw_phy_cfg(tp);
-+
-+	tp->ups_info.r_tune = true;
-+}
-+
- static void rtl8153_change_mtu(struct r8152 *tp)
- {
- 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
-@@ -4808,6 +5331,7 @@ static void r8153_enter_oob(struct r8152
- 
- 	case RTL_VER_08:
- 	case RTL_VER_09:
-+	case RTL_VER_14:
- 		/* Clear teredo wake event. bit[15:8] is the teredo wakeup
- 		 * type. Set it to zero. bits[7:0] are the W1C bits about
- 		 * the events. Set them to all 1 to clear them.
-@@ -4844,6 +5368,96 @@ static void rtl8153_disable(struct r8152
- 	r8153_aldps_en(tp, true);
- }
- 
-+static int rtl8156_enable(struct r8152 *tp)
-+{
-+	u32 ocp_data;
-+	u16 speed;
-+
-+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+		return -ENODEV;
-+
-+	set_tx_qlen(tp);
-+	rtl_set_eee_plus(tp);
-+	r8153_set_rx_early_timeout(tp);
-+	r8153_set_rx_early_size(tp);
-+
-+	speed = rtl8152_get_speed(tp);
-+	rtl_set_ifg(tp, speed);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
-+	if (speed & _2500bps)
-+		ocp_data &= ~IDLE_SPDWN_EN;
-+	else
-+		ocp_data |= IDLE_SPDWN_EN;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
-+
-+	if (speed & _1000bps)
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x11);
-+	else if (speed & _500bps)
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x3d);
-+
-+	if (tp->udev->speed == USB_SPEED_HIGH) {
-+		/* USB 0xb45e[3:0] l1_nyet_hird */
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL);
-+		ocp_data &= ~0xf;
-+		if (is_flow_control(speed))
-+			ocp_data |= 0xf;
-+		else
-+			ocp_data |= 0x1;
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data);
-+	}
-+
-+	return rtl_enable(tp);
-+}
-+
-+static int rtl8156b_enable(struct r8152 *tp)
-+{
-+	u32 ocp_data;
-+	u16 speed;
-+
-+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+		return -ENODEV;
-+
-+	set_tx_qlen(tp);
-+	rtl_set_eee_plus(tp);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM);
-+	ocp_data &= ~RX_AGGR_NUM_MASK;
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM, ocp_data);
-+
-+	r8153_set_rx_early_timeout(tp);
-+	r8153_set_rx_early_size(tp);
-+
-+	speed = rtl8152_get_speed(tp);
-+	rtl_set_ifg(tp, speed);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
-+	if (speed & _2500bps)
-+		ocp_data &= ~IDLE_SPDWN_EN;
-+	else
-+		ocp_data |= IDLE_SPDWN_EN;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
-+
-+	if (tp->udev->speed == USB_SPEED_HIGH) {
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL);
-+		ocp_data &= ~0xf;
-+		if (is_flow_control(speed))
-+			ocp_data |= 0xf;
-+		else
-+			ocp_data |= 0x1;
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data);
-+	}
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
-+	ocp_data &= ~FC_PATCH_TASK;
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
-+	usleep_range(1000, 2000);
-+	ocp_data |= FC_PATCH_TASK;
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
-+
-+	return rtl_enable(tp);
-+}
-+
- static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
- 			     u32 advertising)
- {
-@@ -4892,58 +5506,73 @@ static int rtl8152_set_speed(struct r815
- 
- 		tp->mii.force_media = 1;
- 	} else {
--		u16 anar, tmp1;
-+		u16 orig, new1;
- 		u32 support;
- 
- 		support = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
- 			  RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL;
- 
--		if (tp->mii.supports_gmii)
-+		if (tp->mii.supports_gmii) {
- 			support |= RTL_ADVERTISED_1000_FULL;
- 
-+			if (tp->support_2500full)
-+				support |= RTL_ADVERTISED_2500_FULL;
-+		}
-+
- 		if (!(advertising & support))
- 			return -EINVAL;
- 
--		anar = r8152_mdio_read(tp, MII_ADVERTISE);
--		tmp1 = anar & ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
-+		orig = r8152_mdio_read(tp, MII_ADVERTISE);
-+		new1 = orig & ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
- 				ADVERTISE_100HALF | ADVERTISE_100FULL);
- 		if (advertising & RTL_ADVERTISED_10_HALF) {
--			tmp1 |= ADVERTISE_10HALF;
-+			new1 |= ADVERTISE_10HALF;
- 			tp->ups_info.speed_duplex = NWAY_10M_HALF;
- 		}
- 		if (advertising & RTL_ADVERTISED_10_FULL) {
--			tmp1 |= ADVERTISE_10FULL;
-+			new1 |= ADVERTISE_10FULL;
- 			tp->ups_info.speed_duplex = NWAY_10M_FULL;
- 		}
- 
- 		if (advertising & RTL_ADVERTISED_100_HALF) {
--			tmp1 |= ADVERTISE_100HALF;
-+			new1 |= ADVERTISE_100HALF;
- 			tp->ups_info.speed_duplex = NWAY_100M_HALF;
- 		}
- 		if (advertising & RTL_ADVERTISED_100_FULL) {
--			tmp1 |= ADVERTISE_100FULL;
-+			new1 |= ADVERTISE_100FULL;
- 			tp->ups_info.speed_duplex = NWAY_100M_FULL;
- 		}
- 
--		if (anar != tmp1) {
--			r8152_mdio_write(tp, MII_ADVERTISE, tmp1);
--			tp->mii.advertising = tmp1;
-+		if (orig != new1) {
-+			r8152_mdio_write(tp, MII_ADVERTISE, new1);
-+			tp->mii.advertising = new1;
- 		}
- 
- 		if (tp->mii.supports_gmii) {
--			u16 gbcr;
--
--			gbcr = r8152_mdio_read(tp, MII_CTRL1000);
--			tmp1 = gbcr & ~(ADVERTISE_1000FULL |
-+			orig = r8152_mdio_read(tp, MII_CTRL1000);
-+			new1 = orig & ~(ADVERTISE_1000FULL |
- 					ADVERTISE_1000HALF);
- 
- 			if (advertising & RTL_ADVERTISED_1000_FULL) {
--				tmp1 |= ADVERTISE_1000FULL;
-+				new1 |= ADVERTISE_1000FULL;
- 				tp->ups_info.speed_duplex = NWAY_1000M_FULL;
- 			}
- 
--			if (gbcr != tmp1)
--				r8152_mdio_write(tp, MII_CTRL1000, tmp1);
-+			if (orig != new1)
-+				r8152_mdio_write(tp, MII_CTRL1000, new1);
-+		}
-+
-+		if (tp->support_2500full) {
-+			orig = ocp_reg_read(tp, OCP_10GBT_CTRL);
-+			new1 = orig & ~MDIO_AN_10GBT_CTRL_ADV2_5G;
-+
-+			if (advertising & RTL_ADVERTISED_2500_FULL) {
-+				new1 |= MDIO_AN_10GBT_CTRL_ADV2_5G;
-+				tp->ups_info.speed_duplex = NWAY_2500M_FULL;
-+			}
-+
-+			if (orig != new1)
-+				ocp_reg_write(tp, OCP_10GBT_CTRL, new1);
- 		}
- 
- 		bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
-@@ -5099,6 +5728,253 @@ static void rtl8153b_down(struct r8152 *
- 	r8153_aldps_en(tp, true);
- }
- 
-+static void rtl8153c_change_mtu(struct r8152 *tp)
-+{
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
-+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, 10 * 1024 / 64);
-+
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64);
-+
-+	/* Adjust the tx fifo free credit full threshold, otherwise
-+	 * the fifo would be too small to send a jumbo frame packet.
-+	 */
-+	if (tp->netdev->mtu < 8000)
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 2048 / 8);
-+	else
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 900 / 8);
-+}
-+
-+static void rtl8153c_up(struct r8152 *tp)
-+{
-+	u32 ocp_data;
-+
-+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+		return;
-+
-+	r8153b_u1u2en(tp, false);
-+	r8153_u2p3en(tp, false);
-+	r8153_aldps_en(tp, false);
-+
-+	rxdy_gated_en(tp, true);
-+	r8153_teredo_off(tp);
-+
-+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
-+	ocp_data &= ~RCR_ACPT_ALL;
-+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
-+
-+	rtl8152_nic_reset(tp);
-+	rtl_reset_bmu(tp);
-+
-+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
-+	ocp_data &= ~NOW_IS_OOB;
-+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
-+	ocp_data &= ~MCU_BORW_EN;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
-+
-+	wait_oob_link_list_ready(tp);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
-+	ocp_data |= RE_INIT_LL;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
-+
-+	wait_oob_link_list_ready(tp);
-+
-+	rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
-+
-+	rtl8153c_change_mtu(tp);
-+
-+	rtl8152_nic_reset(tp);
-+
-+	/* rx share fifo credit full threshold */
-+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, 0x02);
-+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, 0x08);
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
-+
-+	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B);
-+
-+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
-+	ocp_data |= BIT(8);
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
-+
-+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
-+	ocp_data &= ~PLA_MCU_SPDWN_EN;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
-+
-+	r8153_aldps_en(tp, true);
-+	r8153b_u1u2en(tp, true);
-+}
-+
-+static inline u32 fc_pause_on_auto(struct r8152 *tp)
-+{
-+	return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 6 * 1024);
-+}
-+
-+static inline u32 fc_pause_off_auto(struct r8152 *tp)
-+{
-+	return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 14 * 1024);
-+}
-+
-+static void r8156_fc_parameter(struct r8152 *tp)
-+{
-+	u32 pause_on = tp->fc_pause_on ? tp->fc_pause_on : fc_pause_on_auto(tp);
-+	u32 pause_off = tp->fc_pause_off ? tp->fc_pause_off : fc_pause_off_auto(tp);
-+
-+	switch (tp->version) {
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 8);
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 8);
-+		break;
-+	case RTL_VER_12:
-+	case RTL_VER_13:
-+	case RTL_VER_15:
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 16);
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 16);
-+		break;
-+	default:
-+		break;
-+	}
-+}
-+
-+static void rtl8156_change_mtu(struct r8152 *tp)
-+{
-+	u32 rx_max_size = mtu_to_size(tp->netdev->mtu);
-+
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rx_max_size);
-+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
-+	r8156_fc_parameter(tp);
-+
-+	/* TX share fifo free credit full threshold */
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64);
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL,
-+		       ALIGN(rx_max_size + sizeof(struct tx_desc), 1024) / 16);
-+}
-+
-+static void rtl8156_up(struct r8152 *tp)
-+{
-+	u32 ocp_data;
-+
-+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+		return;
-+
-+	r8153b_u1u2en(tp, false);
-+	r8153_u2p3en(tp, false);
-+	r8153_aldps_en(tp, false);
-+
-+	rxdy_gated_en(tp, true);
-+	r8153_teredo_off(tp);
-+
-+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
-+	ocp_data &= ~RCR_ACPT_ALL;
-+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
-+
-+	rtl8152_nic_reset(tp);
-+	rtl_reset_bmu(tp);
-+
-+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
-+	ocp_data &= ~NOW_IS_OOB;
-+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
-+	ocp_data &= ~MCU_BORW_EN;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
-+
-+	rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
-+
-+	rtl8156_change_mtu(tp);
-+
-+	switch (tp->version) {
-+	case RTL_TEST_01:
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG);
-+		ocp_data |= ACT_ODMA;
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data);
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	/* share FIFO settings */
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL);
-+	ocp_data &= ~RXFIFO_FULL_MASK;
-+	ocp_data |= 0x08;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, ocp_data);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
-+	ocp_data &= ~PLA_MCU_SPDWN_EN;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION);
-+	ocp_data &= ~(RG_PWRDN_EN | ALL_SPEED_OFF);
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, ocp_data);
-+
-+	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, 0x00600400);
-+
-+	if (tp->saved_wolopts != __rtl_get_wol(tp)) {
-+		netif_warn(tp, ifup, tp->netdev, "wol setting is changed\n");
-+		__rtl_set_wol(tp, tp->saved_wolopts);
-+	}
-+
-+	r8153_aldps_en(tp, true);
-+	r8153_u2p3en(tp, true);
-+
-+	if (tp->udev->speed >= USB_SPEED_SUPER)
-+		r8153b_u1u2en(tp, true);
-+}
-+
-+static void rtl8156_down(struct r8152 *tp)
-+{
-+	u32 ocp_data;
-+
-+	if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
-+		rtl_drop_queued_tx(tp);
-+		return;
-+	}
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
-+	ocp_data |= PLA_MCU_SPDWN_EN;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
-+
-+	r8153b_u1u2en(tp, false);
-+	r8153_u2p3en(tp, false);
-+	r8153b_power_cut_en(tp, false);
-+	r8153_aldps_en(tp, false);
-+
-+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
-+	ocp_data &= ~NOW_IS_OOB;
-+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
-+
-+	rtl_disable(tp);
-+	rtl_reset_bmu(tp);
-+
-+	/* Clear teredo wake event. bit[15:8] is the teredo wakeup
-+	 * type. Set it to zero. bits[7:0] are the W1C bits about
-+	 * the events. Set them to all 1 to clear them.
-+	 */
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff);
-+
-+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
-+	ocp_data |= NOW_IS_OOB;
-+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
-+
-+	rtl_rx_vlan_en(tp, true);
-+	rxdy_gated_en(tp, false);
-+
-+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
-+	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
-+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
-+
-+	r8153_aldps_en(tp, true);
-+}
-+
- static bool rtl8152_in_nway(struct r8152 *tp)
- {
- 	u16 nway_state;
-@@ -5129,7 +6005,7 @@ static void set_carrier(struct r8152 *tp
- {
- 	struct net_device *netdev = tp->netdev;
- 	struct napi_struct *napi = &tp->napi;
--	u8 speed;
-+	u16 speed;
- 
- 	speed = rtl8152_get_speed(tp);
- 
-@@ -5142,7 +6018,7 @@ static void set_carrier(struct r8152 *tp
- 			rtl_start_rx(tp);
- 			clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
- 			_rtl8152_set_rx_mode(netdev);
--			napi_enable(&tp->napi);
-+			napi_enable(napi);
- 			netif_wake_queue(netdev);
- 			netif_info(tp, link, netdev, "carrier on\n");
- 		} else if (netif_queue_stopped(netdev) &&
-@@ -5504,14 +6380,9 @@ static void r8153_init(struct r8152 *tp)
- 
- 	ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
- 
--	/* MAC clock speed down */
--	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0);
--	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0);
--	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0);
--	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0);
--
- 	r8153_power_cut_en(tp, false);
- 	rtl_runtime_suspend_enable(tp, false);
-+	r8153_mac_clk_speed_down(tp, false);
- 	r8153_u1u2en(tp, true);
- 	usb_enable_lpm(tp->udev);
- 
-@@ -5602,9 +6473,7 @@ static void r8153b_init(struct r8152 *tp
- 	usb_enable_lpm(tp->udev);
- 
- 	/* MAC clock speed down */
--	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
--	ocp_data |= MAC_CLK_SPDWN_EN;
--	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
-+	r8153_mac_clk_speed_down(tp, true);
- 
- 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
- 	ocp_data &= ~PLA_MCU_SPDWN_EN;
-@@ -5631,6 +6500,1069 @@ static void r8153b_init(struct r8152 *tp
- 	tp->coalesce = 15000;	/* 15 us */
- }
- 
-+static void r8153c_init(struct r8152 *tp)
-+{
-+	u32 ocp_data;
-+	u16 data;
-+	int i;
-+
-+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+		return;
-+
-+	r8153b_u1u2en(tp, false);
-+
-+	/* Disable spi_en */
-+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
-+	ocp_data &= ~BIT(3);
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, 0xcbf0);
-+	ocp_data |= BIT(1);
-+	ocp_write_word(tp, MCU_TYPE_USB, 0xcbf0, ocp_data);
-+
-+	for (i = 0; i < 500; i++) {
-+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
-+		    AUTOLOAD_DONE)
-+			break;
-+
-+		msleep(20);
-+		if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+			return;
-+	}
-+
-+	data = r8153_phy_status(tp, 0);
-+
-+	data = r8152_mdio_read(tp, MII_BMCR);
-+	if (data & BMCR_PDOWN) {
-+		data &= ~BMCR_PDOWN;
-+		r8152_mdio_write(tp, MII_BMCR, data);
-+	}
-+
-+	data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
-+
-+	r8153_u2p3en(tp, false);
-+
-+	/* MSC timer = 0xfff * 8ms = 32760 ms */
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
-+
-+	r8153b_power_cut_en(tp, false);
-+	r8153c_ups_en(tp, false);
-+	r8153_queue_wake(tp, false);
-+	rtl_runtime_suspend_enable(tp, false);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
-+	if (rtl8152_get_speed(tp) & LINK_STATUS)
-+		ocp_data |= CUR_LINK_OK;
-+	else
-+		ocp_data &= ~CUR_LINK_OK;
-+
-+	ocp_data |= POLL_LINK_CHG;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
-+
-+	r8153b_u1u2en(tp, true);
-+
-+	usb_enable_lpm(tp->udev);
-+
-+	/* MAC clock speed down */
-+	r8153_mac_clk_speed_down(tp, true);
-+
-+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+	ocp_data &= ~BIT(7);
-+	ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
-+
-+	set_bit(GREEN_ETHERNET, &tp->flags);
-+
-+	/* rx aggregation */
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-+	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+	rtl_tally_reset(tp);
-+
-+	tp->coalesce = 15000;	/* 15 us */
-+}
-+
-+static void r8156_hw_phy_cfg(struct r8152 *tp)
-+{
-+	u32 ocp_data;
-+	u16 data;
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
-+	if (ocp_data & PCUT_STATUS) {
-+		ocp_data &= ~PCUT_STATUS;
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
-+	}
-+
-+	data = r8153_phy_status(tp, 0);
-+	switch (data) {
-+	case PHY_STAT_EXT_INIT:
-+		rtl8152_apply_firmware(tp, true);
-+
-+		data = ocp_reg_read(tp, 0xa468);
-+		data &= ~(BIT(3) | BIT(1));
-+		ocp_reg_write(tp, 0xa468, data);
-+		break;
-+	case PHY_STAT_LAN_ON:
-+	case PHY_STAT_PWRDN:
-+	default:
-+		rtl8152_apply_firmware(tp, false);
-+		break;
-+	}
-+
-+	/* disable ALDPS before updating the PHY parameters */
-+	r8153_aldps_en(tp, false);
-+
-+	/* disable EEE before updating the PHY parameters */
-+	rtl_eee_enable(tp, false);
-+
-+	data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
-+	WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
-+	ocp_data |= PFM_PWM_SWITCH;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
-+
-+	switch (tp->version) {
-+	case RTL_VER_10:
-+		data = ocp_reg_read(tp, 0xad40);
-+		data &= ~0x3ff;
-+		data |= BIT(7) | BIT(2);
-+		ocp_reg_write(tp, 0xad40, data);
-+
-+		data = ocp_reg_read(tp, 0xad4e);
-+		data |= BIT(4);
-+		ocp_reg_write(tp, 0xad4e, data);
-+		data = ocp_reg_read(tp, 0xad16);
-+		data &= ~0x3ff;
-+		data |= 0x6;
-+		ocp_reg_write(tp, 0xad16, data);
-+		data = ocp_reg_read(tp, 0xad32);
-+		data &= ~0x3f;
-+		data |= 6;
-+		ocp_reg_write(tp, 0xad32, data);
-+		data = ocp_reg_read(tp, 0xac08);
-+		data &= ~(BIT(12) | BIT(8));
-+		ocp_reg_write(tp, 0xac08, data);
-+		data = ocp_reg_read(tp, 0xac8a);
-+		data |= BIT(12) | BIT(13) | BIT(14);
-+		data &= ~BIT(15);
-+		ocp_reg_write(tp, 0xac8a, data);
-+		data = ocp_reg_read(tp, 0xad18);
-+		data |= BIT(10);
-+		ocp_reg_write(tp, 0xad18, data);
-+		data = ocp_reg_read(tp, 0xad1a);
-+		data |= 0x3ff;
-+		ocp_reg_write(tp, 0xad1a, data);
-+		data = ocp_reg_read(tp, 0xad1c);
-+		data |= 0x3ff;
-+		ocp_reg_write(tp, 0xad1c, data);
-+
-+		data = sram_read(tp, 0x80ea);
-+		data &= ~0xff00;
-+		data |= 0xc400;
-+		sram_write(tp, 0x80ea, data);
-+		data = sram_read(tp, 0x80eb);
-+		data &= ~0x0700;
-+		data |= 0x0300;
-+		sram_write(tp, 0x80eb, data);
-+		data = sram_read(tp, 0x80f8);
-+		data &= ~0xff00;
-+		data |= 0x1c00;
-+		sram_write(tp, 0x80f8, data);
-+		data = sram_read(tp, 0x80f1);
-+		data &= ~0xff00;
-+		data |= 0x3000;
-+		sram_write(tp, 0x80f1, data);
-+
-+		data = sram_read(tp, 0x80fe);
-+		data &= ~0xff00;
-+		data |= 0xa500;
-+		sram_write(tp, 0x80fe, data);
-+		data = sram_read(tp, 0x8102);
-+		data &= ~0xff00;
-+		data |= 0x5000;
-+		sram_write(tp, 0x8102, data);
-+		data = sram_read(tp, 0x8015);
-+		data &= ~0xff00;
-+		data |= 0x3300;
-+		sram_write(tp, 0x8015, data);
-+		data = sram_read(tp, 0x8100);
-+		data &= ~0xff00;
-+		data |= 0x7000;
-+		sram_write(tp, 0x8100, data);
-+		data = sram_read(tp, 0x8014);
-+		data &= ~0xff00;
-+		data |= 0xf000;
-+		sram_write(tp, 0x8014, data);
-+		data = sram_read(tp, 0x8016);
-+		data &= ~0xff00;
-+		data |= 0x6500;
-+		sram_write(tp, 0x8016, data);
-+		data = sram_read(tp, 0x80dc);
-+		data &= ~0xff00;
-+		data |= 0xed00;
-+		sram_write(tp, 0x80dc, data);
-+		data = sram_read(tp, 0x80df);
-+		data |= BIT(8);
-+		sram_write(tp, 0x80df, data);
-+		data = sram_read(tp, 0x80e1);
-+		data &= ~BIT(8);
-+		sram_write(tp, 0x80e1, data);
-+
-+		data = ocp_reg_read(tp, 0xbf06);
-+		data &= ~0x003f;
-+		data |= 0x0038;
-+		ocp_reg_write(tp, 0xbf06, data);
-+
-+		sram_write(tp, 0x819f, 0xddb6);
-+
-+		ocp_reg_write(tp, 0xbc34, 0x5555);
-+		data = ocp_reg_read(tp, 0xbf0a);
-+		data &= ~0x0e00;
-+		data |= 0x0a00;
-+		ocp_reg_write(tp, 0xbf0a, data);
-+
-+		data = ocp_reg_read(tp, 0xbd2c);
-+		data &= ~BIT(13);
-+		ocp_reg_write(tp, 0xbd2c, data);
-+		break;
-+	case RTL_VER_11:
-+		data = ocp_reg_read(tp, 0xad16);
-+		data |= 0x3ff;
-+		ocp_reg_write(tp, 0xad16, data);
-+		data = ocp_reg_read(tp, 0xad32);
-+		data &= ~0x3f;
-+		data |= 6;
-+		ocp_reg_write(tp, 0xad32, data);
-+		data = ocp_reg_read(tp, 0xac08);
-+		data &= ~(BIT(12) | BIT(8));
-+		ocp_reg_write(tp, 0xac08, data);
-+		data = ocp_reg_read(tp, 0xacc0);
-+		data &= ~0x3;
-+		data |= BIT(1);
-+		ocp_reg_write(tp, 0xacc0, data);
-+		data = ocp_reg_read(tp, 0xad40);
-+		data &= ~0xe7;
-+		data |= BIT(6) | BIT(2);
-+		ocp_reg_write(tp, 0xad40, data);
-+		data = ocp_reg_read(tp, 0xac14);
-+		data &= ~BIT(7);
-+		ocp_reg_write(tp, 0xac14, data);
-+		data = ocp_reg_read(tp, 0xac80);
-+		data &= ~(BIT(8) | BIT(9));
-+		ocp_reg_write(tp, 0xac80, data);
-+		data = ocp_reg_read(tp, 0xac5e);
-+		data &= ~0x7;
-+		data |= BIT(1);
-+		ocp_reg_write(tp, 0xac5e, data);
-+		ocp_reg_write(tp, 0xad4c, 0x00a8);
-+		ocp_reg_write(tp, 0xac5c, 0x01ff);
-+		data = ocp_reg_read(tp, 0xac8a);
-+		data &= ~0xf0;
-+		data |= BIT(4) | BIT(5);
-+		ocp_reg_write(tp, 0xac8a, data);
-+		ocp_reg_write(tp, 0xb87c, 0x8157);
-+		data = ocp_reg_read(tp, 0xb87e);
-+		data &= ~0xff00;
-+		data |= 0x0500;
-+		ocp_reg_write(tp, 0xb87e, data);
-+		ocp_reg_write(tp, 0xb87c, 0x8159);
-+		data = ocp_reg_read(tp, 0xb87e);
-+		data &= ~0xff00;
-+		data |= 0x0700;
-+		ocp_reg_write(tp, 0xb87e, data);
-+
-+		/* AAGC */
-+		ocp_reg_write(tp, 0xb87c, 0x80a2);
-+		ocp_reg_write(tp, 0xb87e, 0x0153);
-+		ocp_reg_write(tp, 0xb87c, 0x809c);
-+		ocp_reg_write(tp, 0xb87e, 0x0153);
-+
-+		/* EEE parameter */
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS_2P5G, 0x0056);
-+
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_USB_CFG);
-+		ocp_data |= EN_XG_LIP | EN_G_LIP;
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data);
-+
-+		sram_write(tp, 0x8257, 0x020f); /*  XG PLL */
-+		sram_write(tp, 0x80ea, 0x7843); /* GIGA Master */
-+
-+		if (rtl_phy_patch_request(tp, true, true))
-+			return;
-+
-+		/* Advance EEE */
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
-+		ocp_data |= EEE_SPDWN_EN;
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
-+
-+		data = ocp_reg_read(tp, OCP_DOWN_SPEED);
-+		data &= ~(EN_EEE_100 | EN_EEE_1000);
-+		data |= EN_10M_CLKDIV;
-+		ocp_reg_write(tp, OCP_DOWN_SPEED, data);
-+		tp->ups_info._10m_ckdiv = true;
-+		tp->ups_info.eee_plloff_100 = false;
-+		tp->ups_info.eee_plloff_giga = false;
-+
-+		data = ocp_reg_read(tp, OCP_POWER_CFG);
-+		data &= ~EEE_CLKDIV_EN;
-+		ocp_reg_write(tp, OCP_POWER_CFG, data);
-+		tp->ups_info.eee_ckdiv = false;
-+
-+		ocp_reg_write(tp, OCP_SYSCLK_CFG, 0);
-+		ocp_reg_write(tp, OCP_SYSCLK_CFG, sysclk_div_expo(5));
-+		tp->ups_info._250m_ckdiv = false;
-+
-+		rtl_phy_patch_request(tp, false, true);
-+
-+		/* enable ADC Ibias Cal */
-+		data = ocp_reg_read(tp, 0xd068);
-+		data |= BIT(13);
-+		ocp_reg_write(tp, 0xd068, data);
-+
-+		/* enable Thermal Sensor */
-+		data = sram_read(tp, 0x81a2);
-+		data &= ~BIT(8);
-+		sram_write(tp, 0x81a2, data);
-+		data = ocp_reg_read(tp, 0xb54c);
-+		data &= ~0xff00;
-+		data |= 0xdb00;
-+		ocp_reg_write(tp, 0xb54c, data);
-+
-+		/* Nway 2.5G Lite */
-+		data = ocp_reg_read(tp, 0xa454);
-+		data &= ~BIT(0);
-+		ocp_reg_write(tp, 0xa454, data);
-+
-+		/* CS DSP solution */
-+		data = ocp_reg_read(tp, OCP_10GBT_CTRL);
-+		data |= RTL_ADV2_5G_F_R;
-+		ocp_reg_write(tp, OCP_10GBT_CTRL, data);
-+		data = ocp_reg_read(tp, 0xad4e);
-+		data &= ~BIT(4);
-+		ocp_reg_write(tp, 0xad4e, data);
-+		data = ocp_reg_read(tp, 0xa86a);
-+		data &= ~BIT(0);
-+		ocp_reg_write(tp, 0xa86a, data);
-+
-+		/* MDI SWAP */
-+		if ((ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG) & MID_REVERSE) &&
-+		    (ocp_reg_read(tp, 0xd068) & BIT(1))) {
-+			u16 swap_a, swap_b;
-+
-+			data = ocp_reg_read(tp, 0xd068);
-+			data &= ~0x1f;
-+			data |= 0x1; /* p0 */
-+			ocp_reg_write(tp, 0xd068, data);
-+			swap_a = ocp_reg_read(tp, 0xd06a);
-+			data &= ~0x18;
-+			data |= 0x18; /* p3 */
-+			ocp_reg_write(tp, 0xd068, data);
-+			swap_b = ocp_reg_read(tp, 0xd06a);
-+			data &= ~0x18; /* p0 */
-+			ocp_reg_write(tp, 0xd068, data);
-+			ocp_reg_write(tp, 0xd06a,
-+				      (swap_a & ~0x7ff) | (swap_b & 0x7ff));
-+			data |= 0x18; /* p3 */
-+			ocp_reg_write(tp, 0xd068, data);
-+			ocp_reg_write(tp, 0xd06a,
-+				      (swap_b & ~0x7ff) | (swap_a & 0x7ff));
-+			data &= ~0x18;
-+			data |= 0x08; /* p1 */
-+			ocp_reg_write(tp, 0xd068, data);
-+			swap_a = ocp_reg_read(tp, 0xd06a);
-+			data &= ~0x18;
-+			data |= 0x10; /* p2 */
-+			ocp_reg_write(tp, 0xd068, data);
-+			swap_b = ocp_reg_read(tp, 0xd06a);
-+			data &= ~0x18;
-+			data |= 0x08; /* p1 */
-+			ocp_reg_write(tp, 0xd068, data);
-+			ocp_reg_write(tp, 0xd06a,
-+				      (swap_a & ~0x7ff) | (swap_b & 0x7ff));
-+			data &= ~0x18;
-+			data |= 0x10; /* p2 */
-+			ocp_reg_write(tp, 0xd068, data);
-+			ocp_reg_write(tp, 0xd06a,
-+				      (swap_b & ~0x7ff) | (swap_a & 0x7ff));
-+			swap_a = ocp_reg_read(tp, 0xbd5a);
-+			swap_b = ocp_reg_read(tp, 0xbd5c);
-+			ocp_reg_write(tp, 0xbd5a, (swap_a & ~0x1f1f) |
-+				      ((swap_b & 0x1f) << 8) |
-+				      ((swap_b >> 8) & 0x1f));
-+			ocp_reg_write(tp, 0xbd5c, (swap_b & ~0x1f1f) |
-+				      ((swap_a & 0x1f) << 8) |
-+				      ((swap_a >> 8) & 0x1f));
-+			swap_a = ocp_reg_read(tp, 0xbc18);
-+			swap_b = ocp_reg_read(tp, 0xbc1a);
-+			ocp_reg_write(tp, 0xbc18, (swap_a & ~0x1f1f) |
-+				      ((swap_b & 0x1f) << 8) |
-+				      ((swap_b >> 8) & 0x1f));
-+			ocp_reg_write(tp, 0xbc1a, (swap_b & ~0x1f1f) |
-+				      ((swap_a & 0x1f) << 8) |
-+				      ((swap_a >> 8) & 0x1f));
-+		}
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
-+
-+	data = ocp_reg_read(tp, 0xa428);
-+	data &= ~BIT(9);
-+	ocp_reg_write(tp, 0xa428, data);
-+	data = ocp_reg_read(tp, 0xa5ea);
-+	data &= ~BIT(0);
-+	ocp_reg_write(tp, 0xa5ea, data);
-+	tp->ups_info.lite_mode = 0;
-+
-+	if (tp->eee_en)
-+		rtl_eee_enable(tp, true);
-+
-+	r8153_aldps_en(tp, true);
-+	r8152b_enable_fc(tp);
-+	r8153_u2p3en(tp, true);
-+
-+	set_bit(PHY_RESET, &tp->flags);
-+}
-+
-+static void r8156b_hw_phy_cfg(struct r8152 *tp)
-+{
-+	u32 ocp_data;
-+	u16 data;
-+
-+	switch (tp->version) {
-+	case RTL_VER_12:
-+		ocp_reg_write(tp, 0xbf86, 0x9000);
-+		data = ocp_reg_read(tp, 0xc402);
-+		data |= BIT(10);
-+		ocp_reg_write(tp, 0xc402, data);
-+		data &= ~BIT(10);
-+		ocp_reg_write(tp, 0xc402, data);
-+		ocp_reg_write(tp, 0xbd86, 0x1010);
-+		ocp_reg_write(tp, 0xbd88, 0x1010);
-+		data = ocp_reg_read(tp, 0xbd4e);
-+		data &= ~(BIT(10) | BIT(11));
-+		data |= BIT(11);
-+		ocp_reg_write(tp, 0xbd4e, data);
-+		data = ocp_reg_read(tp, 0xbf46);
-+		data &= ~0xf00;
-+		data |= 0x700;
-+		ocp_reg_write(tp, 0xbf46, data);
-+		break;
-+	case RTL_VER_13:
-+	case RTL_VER_15:
-+		r8156b_wait_loading_flash(tp);
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
-+	if (ocp_data & PCUT_STATUS) {
-+		ocp_data &= ~PCUT_STATUS;
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
-+	}
-+
-+	data = r8153_phy_status(tp, 0);
-+	switch (data) {
-+	case PHY_STAT_EXT_INIT:
-+		rtl8152_apply_firmware(tp, true);
-+
-+		data = ocp_reg_read(tp, 0xa466);
-+		data &= ~BIT(0);
-+		ocp_reg_write(tp, 0xa466, data);
-+
-+		data = ocp_reg_read(tp, 0xa468);
-+		data &= ~(BIT(3) | BIT(1));
-+		ocp_reg_write(tp, 0xa468, data);
-+		break;
-+	case PHY_STAT_LAN_ON:
-+	case PHY_STAT_PWRDN:
-+	default:
-+		rtl8152_apply_firmware(tp, false);
-+		break;
-+	}
-+
-+	data = r8152_mdio_read(tp, MII_BMCR);
-+	if (data & BMCR_PDOWN) {
-+		data &= ~BMCR_PDOWN;
-+		r8152_mdio_write(tp, MII_BMCR, data);
-+	}
-+
-+	/* disable ALDPS before updating the PHY parameters */
-+	r8153_aldps_en(tp, false);
-+
-+	/* disable EEE before updating the PHY parameters */
-+	rtl_eee_enable(tp, false);
-+
-+	data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
-+	WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
-+	ocp_data |= PFM_PWM_SWITCH;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
-+
-+	switch (tp->version) {
-+	case RTL_VER_12:
-+		data = ocp_reg_read(tp, 0xbc08);
-+		data |= BIT(3) | BIT(2);
-+		ocp_reg_write(tp, 0xbc08, data);
-+
-+		data = sram_read(tp, 0x8fff);
-+		data &= ~0xff00;
-+		data |= 0x0400;
-+		sram_write(tp, 0x8fff, data);
-+
-+		data = ocp_reg_read(tp, 0xacda);
-+		data |= 0xff00;
-+		ocp_reg_write(tp, 0xacda, data);
-+		data = ocp_reg_read(tp, 0xacde);
-+		data |= 0xf000;
-+		ocp_reg_write(tp, 0xacde, data);
-+		ocp_reg_write(tp, 0xac8c, 0x0ffc);
-+		ocp_reg_write(tp, 0xac46, 0xb7b4);
-+		ocp_reg_write(tp, 0xac50, 0x0fbc);
-+		ocp_reg_write(tp, 0xac3c, 0x9240);
-+		ocp_reg_write(tp, 0xac4e, 0x0db4);
-+		ocp_reg_write(tp, 0xacc6, 0x0707);
-+		ocp_reg_write(tp, 0xacc8, 0xa0d3);
-+		ocp_reg_write(tp, 0xad08, 0x0007);
-+
-+		ocp_reg_write(tp, 0xb87c, 0x8560);
-+		ocp_reg_write(tp, 0xb87e, 0x19cc);
-+		ocp_reg_write(tp, 0xb87c, 0x8562);
-+		ocp_reg_write(tp, 0xb87e, 0x19cc);
-+		ocp_reg_write(tp, 0xb87c, 0x8564);
-+		ocp_reg_write(tp, 0xb87e, 0x19cc);
-+		ocp_reg_write(tp, 0xb87c, 0x8566);
-+		ocp_reg_write(tp, 0xb87e, 0x147d);
-+		ocp_reg_write(tp, 0xb87c, 0x8568);
-+		ocp_reg_write(tp, 0xb87e, 0x147d);
-+		ocp_reg_write(tp, 0xb87c, 0x856a);
-+		ocp_reg_write(tp, 0xb87e, 0x147d);
-+		ocp_reg_write(tp, 0xb87c, 0x8ffe);
-+		ocp_reg_write(tp, 0xb87e, 0x0907);
-+		ocp_reg_write(tp, 0xb87c, 0x80d6);
-+		ocp_reg_write(tp, 0xb87e, 0x2801);
-+		ocp_reg_write(tp, 0xb87c, 0x80f2);
-+		ocp_reg_write(tp, 0xb87e, 0x2801);
-+		ocp_reg_write(tp, 0xb87c, 0x80f4);
-+		ocp_reg_write(tp, 0xb87e, 0x6077);
-+		ocp_reg_write(tp, 0xb506, 0x01e7);
-+
-+		ocp_reg_write(tp, 0xb87c, 0x8013);
-+		ocp_reg_write(tp, 0xb87e, 0x0700);
-+		ocp_reg_write(tp, 0xb87c, 0x8fb9);
-+		ocp_reg_write(tp, 0xb87e, 0x2801);
-+		ocp_reg_write(tp, 0xb87c, 0x8fba);
-+		ocp_reg_write(tp, 0xb87e, 0x0100);
-+		ocp_reg_write(tp, 0xb87c, 0x8fbc);
-+		ocp_reg_write(tp, 0xb87e, 0x1900);
-+		ocp_reg_write(tp, 0xb87c, 0x8fbe);
-+		ocp_reg_write(tp, 0xb87e, 0xe100);
-+		ocp_reg_write(tp, 0xb87c, 0x8fc0);
-+		ocp_reg_write(tp, 0xb87e, 0x0800);
-+		ocp_reg_write(tp, 0xb87c, 0x8fc2);
-+		ocp_reg_write(tp, 0xb87e, 0xe500);
-+		ocp_reg_write(tp, 0xb87c, 0x8fc4);
-+		ocp_reg_write(tp, 0xb87e, 0x0f00);
-+		ocp_reg_write(tp, 0xb87c, 0x8fc6);
-+		ocp_reg_write(tp, 0xb87e, 0xf100);
-+		ocp_reg_write(tp, 0xb87c, 0x8fc8);
-+		ocp_reg_write(tp, 0xb87e, 0x0400);
-+		ocp_reg_write(tp, 0xb87c, 0x8fca);
-+		ocp_reg_write(tp, 0xb87e, 0xf300);
-+		ocp_reg_write(tp, 0xb87c, 0x8fcc);
-+		ocp_reg_write(tp, 0xb87e, 0xfd00);
-+		ocp_reg_write(tp, 0xb87c, 0x8fce);
-+		ocp_reg_write(tp, 0xb87e, 0xff00);
-+		ocp_reg_write(tp, 0xb87c, 0x8fd0);
-+		ocp_reg_write(tp, 0xb87e, 0xfb00);
-+		ocp_reg_write(tp, 0xb87c, 0x8fd2);
-+		ocp_reg_write(tp, 0xb87e, 0x0100);
-+		ocp_reg_write(tp, 0xb87c, 0x8fd4);
-+		ocp_reg_write(tp, 0xb87e, 0xf400);
-+		ocp_reg_write(tp, 0xb87c, 0x8fd6);
-+		ocp_reg_write(tp, 0xb87e, 0xff00);
-+		ocp_reg_write(tp, 0xb87c, 0x8fd8);
-+		ocp_reg_write(tp, 0xb87e, 0xf600);
-+
-+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG);
-+		ocp_data |= EN_XG_LIP | EN_G_LIP;
-+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data);
-+		ocp_reg_write(tp, 0xb87c, 0x813d);
-+		ocp_reg_write(tp, 0xb87e, 0x390e);
-+		ocp_reg_write(tp, 0xb87c, 0x814f);
-+		ocp_reg_write(tp, 0xb87e, 0x790e);
-+		ocp_reg_write(tp, 0xb87c, 0x80b0);
-+		ocp_reg_write(tp, 0xb87e, 0x0f31);
-+		data = ocp_reg_read(tp, 0xbf4c);
-+		data |= BIT(1);
-+		ocp_reg_write(tp, 0xbf4c, data);
-+		data = ocp_reg_read(tp, 0xbcca);
-+		data |= BIT(9) | BIT(8);
-+		ocp_reg_write(tp, 0xbcca, data);
-+		ocp_reg_write(tp, 0xb87c, 0x8141);
-+		ocp_reg_write(tp, 0xb87e, 0x320e);
-+		ocp_reg_write(tp, 0xb87c, 0x8153);
-+		ocp_reg_write(tp, 0xb87e, 0x720e);
-+		ocp_reg_write(tp, 0xb87c, 0x8529);
-+		ocp_reg_write(tp, 0xb87e, 0x050e);
-+		data = ocp_reg_read(tp, OCP_EEE_CFG);
-+		data &= ~CTAP_SHORT_EN;
-+		ocp_reg_write(tp, OCP_EEE_CFG, data);
-+
-+		sram_write(tp, 0x816c, 0xc4a0);
-+		sram_write(tp, 0x8170, 0xc4a0);
-+		sram_write(tp, 0x8174, 0x04a0);
-+		sram_write(tp, 0x8178, 0x04a0);
-+		sram_write(tp, 0x817c, 0x0719);
-+		sram_write(tp, 0x8ff4, 0x0400);
-+		sram_write(tp, 0x8ff1, 0x0404);
-+
-+		ocp_reg_write(tp, 0xbf4a, 0x001b);
-+		ocp_reg_write(tp, 0xb87c, 0x8033);
-+		ocp_reg_write(tp, 0xb87e, 0x7c13);
-+		ocp_reg_write(tp, 0xb87c, 0x8037);
-+		ocp_reg_write(tp, 0xb87e, 0x7c13);
-+		ocp_reg_write(tp, 0xb87c, 0x803b);
-+		ocp_reg_write(tp, 0xb87e, 0xfc32);
-+		ocp_reg_write(tp, 0xb87c, 0x803f);
-+		ocp_reg_write(tp, 0xb87e, 0x7c13);
-+		ocp_reg_write(tp, 0xb87c, 0x8043);
-+		ocp_reg_write(tp, 0xb87e, 0x7c13);
-+		ocp_reg_write(tp, 0xb87c, 0x8047);
-+		ocp_reg_write(tp, 0xb87e, 0x7c13);
-+
-+		ocp_reg_write(tp, 0xb87c, 0x8145);
-+		ocp_reg_write(tp, 0xb87e, 0x370e);
-+		ocp_reg_write(tp, 0xb87c, 0x8157);
-+		ocp_reg_write(tp, 0xb87e, 0x770e);
-+		ocp_reg_write(tp, 0xb87c, 0x8169);
-+		ocp_reg_write(tp, 0xb87e, 0x0d0a);
-+		ocp_reg_write(tp, 0xb87c, 0x817b);
-+		ocp_reg_write(tp, 0xb87e, 0x1d0a);
-+
-+		data = sram_read(tp, 0x8217);
-+		data &= ~0xff00;
-+		data |= 0x5000;
-+		sram_write(tp, 0x8217, data);
-+		data = sram_read(tp, 0x821a);
-+		data &= ~0xff00;
-+		data |= 0x5000;
-+		sram_write(tp, 0x821a, data);
-+		sram_write(tp, 0x80da, 0x0403);
-+		data = sram_read(tp, 0x80dc);
-+		data &= ~0xff00;
-+		data |= 0x1000;
-+		sram_write(tp, 0x80dc, data);
-+		sram_write(tp, 0x80b3, 0x0384);
-+		sram_write(tp, 0x80b7, 0x2007);
-+		data = sram_read(tp, 0x80ba);
-+		data &= ~0xff00;
-+		data |= 0x6c00;
-+		sram_write(tp, 0x80ba, data);
-+		sram_write(tp, 0x80b5, 0xf009);
-+		data = sram_read(tp, 0x80bd);
-+		data &= ~0xff00;
-+		data |= 0x9f00;
-+		sram_write(tp, 0x80bd, data);
-+		sram_write(tp, 0x80c7, 0xf083);
-+		sram_write(tp, 0x80dd, 0x03f0);
-+		data = sram_read(tp, 0x80df);
-+		data &= ~0xff00;
-+		data |= 0x1000;
-+		sram_write(tp, 0x80df, data);
-+		sram_write(tp, 0x80cb, 0x2007);
-+		data = sram_read(tp, 0x80ce);
-+		data &= ~0xff00;
-+		data |= 0x6c00;
-+		sram_write(tp, 0x80ce, data);
-+		sram_write(tp, 0x80c9, 0x8009);
-+		data = sram_read(tp, 0x80d1);
-+		data &= ~0xff00;
-+		data |= 0x8000;
-+		sram_write(tp, 0x80d1, data);
-+		sram_write(tp, 0x80a3, 0x200a);
-+		sram_write(tp, 0x80a5, 0xf0ad);
-+		sram_write(tp, 0x809f, 0x6073);
-+		sram_write(tp, 0x80a1, 0x000b);
-+		data = sram_read(tp, 0x80a9);
-+		data &= ~0xff00;
-+		data |= 0xc000;
-+		sram_write(tp, 0x80a9, data);
-+
-+		if (rtl_phy_patch_request(tp, true, true))
-+			return;
-+
-+		data = ocp_reg_read(tp, 0xb896);
-+		data &= ~BIT(0);
-+		ocp_reg_write(tp, 0xb896, data);
-+		data = ocp_reg_read(tp, 0xb892);
-+		data &= ~0xff00;
-+		ocp_reg_write(tp, 0xb892, data);
-+		ocp_reg_write(tp, 0xb88e, 0xc23e);
-+		ocp_reg_write(tp, 0xb890, 0x0000);
-+		ocp_reg_write(tp, 0xb88e, 0xc240);
-+		ocp_reg_write(tp, 0xb890, 0x0103);
-+		ocp_reg_write(tp, 0xb88e, 0xc242);
-+		ocp_reg_write(tp, 0xb890, 0x0507);
-+		ocp_reg_write(tp, 0xb88e, 0xc244);
-+		ocp_reg_write(tp, 0xb890, 0x090b);
-+		ocp_reg_write(tp, 0xb88e, 0xc246);
-+		ocp_reg_write(tp, 0xb890, 0x0c0e);
-+		ocp_reg_write(tp, 0xb88e, 0xc248);
-+		ocp_reg_write(tp, 0xb890, 0x1012);
-+		ocp_reg_write(tp, 0xb88e, 0xc24a);
-+		ocp_reg_write(tp, 0xb890, 0x1416);
-+		data = ocp_reg_read(tp, 0xb896);
-+		data |= BIT(0);
-+		ocp_reg_write(tp, 0xb896, data);
-+
-+		rtl_phy_patch_request(tp, false, true);
-+
-+		data = ocp_reg_read(tp, 0xa86a);
-+		data |= BIT(0);
-+		ocp_reg_write(tp, 0xa86a, data);
-+		data = ocp_reg_read(tp, 0xa6f0);
-+		data |= BIT(0);
-+		ocp_reg_write(tp, 0xa6f0, data);
-+
-+		ocp_reg_write(tp, 0xbfa0, 0xd70d);
-+		ocp_reg_write(tp, 0xbfa2, 0x4100);
-+		ocp_reg_write(tp, 0xbfa4, 0xe868);
-+		ocp_reg_write(tp, 0xbfa6, 0xdc59);
-+		ocp_reg_write(tp, 0xb54c, 0x3c18);
-+		data = ocp_reg_read(tp, 0xbfa4);
-+		data &= ~BIT(5);
-+		ocp_reg_write(tp, 0xbfa4, data);
-+		data = sram_read(tp, 0x817d);
-+		data |= BIT(12);
-+		sram_write(tp, 0x817d, data);
-+		break;
-+	case RTL_VER_13:
-+		/* 2.5G INRX */
-+		data = ocp_reg_read(tp, 0xac46);
-+		data &= ~0x00f0;
-+		data |= 0x0090;
-+		ocp_reg_write(tp, 0xac46, data);
-+		data = ocp_reg_read(tp, 0xad30);
-+		data &= ~0x0003;
-+		data |= 0x0001;
-+		ocp_reg_write(tp, 0xad30, data);
-+		fallthrough;
-+	case RTL_VER_15:
-+		/* EEE parameter */
-+		ocp_reg_write(tp, 0xb87c, 0x80f5);
-+		ocp_reg_write(tp, 0xb87e, 0x760e);
-+		ocp_reg_write(tp, 0xb87c, 0x8107);
-+		ocp_reg_write(tp, 0xb87e, 0x360e);
-+		ocp_reg_write(tp, 0xb87c, 0x8551);
-+		data = ocp_reg_read(tp, 0xb87e);
-+		data &= ~0xff00;
-+		data |= 0x0800;
-+		ocp_reg_write(tp, 0xb87e, data);
-+
-+		/* ADC_PGA parameter */
-+		data = ocp_reg_read(tp, 0xbf00);
-+		data &= ~0xe000;
-+		data |= 0xa000;
-+		ocp_reg_write(tp, 0xbf00, data);
-+		data = ocp_reg_read(tp, 0xbf46);
-+		data &= ~0x0f00;
-+		data |= 0x0300;
-+		ocp_reg_write(tp, 0xbf46, data);
-+
-+		/* Green Table-PGA, 1G full viterbi */
-+		sram_write(tp, 0x8044, 0x2417);
-+		sram_write(tp, 0x804a, 0x2417);
-+		sram_write(tp, 0x8050, 0x2417);
-+		sram_write(tp, 0x8056, 0x2417);
-+		sram_write(tp, 0x805c, 0x2417);
-+		sram_write(tp, 0x8062, 0x2417);
-+		sram_write(tp, 0x8068, 0x2417);
-+		sram_write(tp, 0x806e, 0x2417);
-+		sram_write(tp, 0x8074, 0x2417);
-+		sram_write(tp, 0x807a, 0x2417);
-+
-+		/* XG PLL */
-+		data = ocp_reg_read(tp, 0xbf84);
-+		data &= ~0xe000;
-+		data |= 0xa000;
-+		ocp_reg_write(tp, 0xbf84, data);
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	if (rtl_phy_patch_request(tp, true, true))
-+		return;
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
-+	ocp_data |= EEE_SPDWN_EN;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
-+
-+	data = ocp_reg_read(tp, OCP_DOWN_SPEED);
-+	data &= ~(EN_EEE_100 | EN_EEE_1000);
-+	data |= EN_10M_CLKDIV;
-+	ocp_reg_write(tp, OCP_DOWN_SPEED, data);
-+	tp->ups_info._10m_ckdiv = true;
-+	tp->ups_info.eee_plloff_100 = false;
-+	tp->ups_info.eee_plloff_giga = false;
-+
-+	data = ocp_reg_read(tp, OCP_POWER_CFG);
-+	data &= ~EEE_CLKDIV_EN;
-+	ocp_reg_write(tp, OCP_POWER_CFG, data);
-+	tp->ups_info.eee_ckdiv = false;
-+
-+	rtl_phy_patch_request(tp, false, true);
-+
-+	rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
-+
-+	data = ocp_reg_read(tp, 0xa428);
-+	data &= ~BIT(9);
-+	ocp_reg_write(tp, 0xa428, data);
-+	data = ocp_reg_read(tp, 0xa5ea);
-+	data &= ~BIT(0);
-+	ocp_reg_write(tp, 0xa5ea, data);
-+	tp->ups_info.lite_mode = 0;
-+
-+	if (tp->eee_en)
-+		rtl_eee_enable(tp, true);
-+
-+	r8153_aldps_en(tp, true);
-+	r8152b_enable_fc(tp);
-+	r8153_u2p3en(tp, true);
-+
-+	set_bit(PHY_RESET, &tp->flags);
-+}
-+
-+static void r8156_init(struct r8152 *tp)
-+{
-+	u32 ocp_data;
-+	u16 data;
-+	int i;
-+
-+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+		return;
-+
-+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
-+	ocp_data &= ~EN_ALL_SPEED;
-+	ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data);
-+
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION);
-+	ocp_data |= BYPASS_MAC_RESET;
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data);
-+
-+	r8153b_u1u2en(tp, false);
-+
-+	for (i = 0; i < 500; i++) {
-+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
-+		    AUTOLOAD_DONE)
-+			break;
-+
-+		msleep(20);
-+		if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+			return;
-+	}
-+
-+	data = r8153_phy_status(tp, 0);
-+	if (data == PHY_STAT_EXT_INIT) {
-+		data = ocp_reg_read(tp, 0xa468);
-+		data &= ~(BIT(3) | BIT(1));
-+		ocp_reg_write(tp, 0xa468, data);
-+	}
-+
-+	data = r8152_mdio_read(tp, MII_BMCR);
-+	if (data & BMCR_PDOWN) {
-+		data &= ~BMCR_PDOWN;
-+		r8152_mdio_write(tp, MII_BMCR, data);
-+	}
-+
-+	data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
-+	WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
-+
-+	r8153_u2p3en(tp, false);
-+
-+	/* MSC timer = 0xfff * 8ms = 32760 ms */
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
-+
-+	/* U1/U2/L1 idle timer. 500 us */
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
-+
-+	r8153b_power_cut_en(tp, false);
-+	r8156_ups_en(tp, false);
-+	r8153_queue_wake(tp, false);
-+	rtl_runtime_suspend_enable(tp, false);
-+
-+	if (tp->udev->speed >= USB_SPEED_SUPER)
-+		r8153b_u1u2en(tp, true);
-+
-+	usb_enable_lpm(tp->udev);
-+
-+	r8156_mac_clk_spd(tp, true);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
-+	ocp_data &= ~PLA_MCU_SPDWN_EN;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
-+	if (rtl8152_get_speed(tp) & LINK_STATUS)
-+		ocp_data |= CUR_LINK_OK;
-+	else
-+		ocp_data &= ~CUR_LINK_OK;
-+	ocp_data |= POLL_LINK_CHG;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
-+
-+	set_bit(GREEN_ETHERNET, &tp->flags);
-+
-+	/* rx aggregation */
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-+	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG);
-+	ocp_data |= ACT_ODMA;
-+	ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data);
-+
-+	rtl_tally_reset(tp);
-+
-+	tp->coalesce = 15000;	/* 15 us */
-+}
-+
-+static void r8156b_init(struct r8152 *tp)
-+{
-+	u32 ocp_data;
-+	u16 data;
-+	int i;
-+
-+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+		return;
-+
-+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
-+	ocp_data &= ~EN_ALL_SPEED;
-+	ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data);
-+
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION);
-+	ocp_data |= BYPASS_MAC_RESET;
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
-+	ocp_data |= RX_DETECT8;
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
-+
-+	r8153b_u1u2en(tp, false);
-+
-+	switch (tp->version) {
-+	case RTL_VER_13:
-+	case RTL_VER_15:
-+		r8156b_wait_loading_flash(tp);
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	for (i = 0; i < 500; i++) {
-+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
-+		    AUTOLOAD_DONE)
-+			break;
-+
-+		msleep(20);
-+		if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+			return;
-+	}
-+
-+	data = r8153_phy_status(tp, 0);
-+	if (data == PHY_STAT_EXT_INIT) {
-+		data = ocp_reg_read(tp, 0xa468);
-+		data &= ~(BIT(3) | BIT(1));
-+		ocp_reg_write(tp, 0xa468, data);
-+
-+		data = ocp_reg_read(tp, 0xa466);
-+		data &= ~BIT(0);
-+		ocp_reg_write(tp, 0xa466, data);
-+	}
-+
-+	data = r8152_mdio_read(tp, MII_BMCR);
-+	if (data & BMCR_PDOWN) {
-+		data &= ~BMCR_PDOWN;
-+		r8152_mdio_write(tp, MII_BMCR, data);
-+	}
-+
-+	data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
-+
-+	r8153_u2p3en(tp, false);
-+
-+	/* MSC timer = 0xfff * 8ms = 32760 ms */
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
-+
-+	/* U1/U2/L1 idle timer. 500 us */
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
-+
-+	r8153b_power_cut_en(tp, false);
-+	r8156_ups_en(tp, false);
-+	r8153_queue_wake(tp, false);
-+	rtl_runtime_suspend_enable(tp, false);
-+
-+	if (tp->udev->speed >= USB_SPEED_SUPER)
-+		r8153b_u1u2en(tp, true);
-+
-+	usb_enable_lpm(tp->udev);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR);
-+	ocp_data &= ~SLOT_EN;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
-+	ocp_data |= FLOW_CTRL_EN;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
-+
-+	/* enable fc timer and set timer to 600 ms. */
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
-+		       CTRL_TIMER_EN | (600 / 8));
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
-+	if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & DACK_DET_EN))
-+		ocp_data |= FLOW_CTRL_PATCH_2;
-+	ocp_data &= ~AUTO_SPEEDUP;
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
-+	ocp_data |= FC_PATCH_TASK;
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
-+
-+	r8156_mac_clk_spd(tp, true);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
-+	ocp_data &= ~PLA_MCU_SPDWN_EN;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
-+	if (rtl8152_get_speed(tp) & LINK_STATUS)
-+		ocp_data |= CUR_LINK_OK;
-+	else
-+		ocp_data &= ~CUR_LINK_OK;
-+	ocp_data |= POLL_LINK_CHG;
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
-+
-+	set_bit(GREEN_ETHERNET, &tp->flags);
-+
-+	/* rx aggregation */
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-+	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+	rtl_tally_reset(tp);
-+
-+	tp->coalesce = 15000;	/* 15 us */
-+}
-+
- static int rtl8152_pre_reset(struct usb_interface *intf)
- {
- 	struct r8152 *tp = usb_get_intfdata(intf);
-@@ -5994,6 +7926,22 @@ int rtl8152_get_link_ksettings(struct ne
- 
- 	mii_ethtool_get_link_ksettings(&tp->mii, cmd);
- 
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-+			 cmd->link_modes.supported, tp->support_2500full);
-+
-+	if (tp->support_2500full) {
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-+				 cmd->link_modes.advertising,
-+				 ocp_reg_read(tp, OCP_10GBT_CTRL) & MDIO_AN_10GBT_CTRL_ADV2_5G);
-+
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-+				 cmd->link_modes.lp_advertising,
-+				 ocp_reg_read(tp, OCP_10GBT_STAT) & MDIO_AN_10GBT_STAT_LP2_5G);
-+
-+		if (is_speed_2500(rtl8152_get_speed(tp)))
-+			cmd->base.speed = SPEED_2500;
-+	}
-+
- 	mutex_unlock(&tp->control);
- 
- 	usb_autopm_put_interface(tp->intf);
-@@ -6037,6 +7985,10 @@ static int rtl8152_set_link_ksettings(st
- 		     cmd->link_modes.advertising))
- 		advertising |= RTL_ADVERTISED_1000_FULL;
- 
-+	if (test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-+		     cmd->link_modes.advertising))
-+		advertising |= RTL_ADVERTISED_2500_FULL;
-+
- 	mutex_lock(&tp->control);
- 
- 	ret = rtl8152_set_speed(tp, cmd->base.autoneg, cmd->base.speed,
-@@ -6626,6 +8578,67 @@ static int rtl_ops_init(struct r8152 *tp
- 		tp->eee_adv		= MDIO_EEE_1000T | MDIO_EEE_100TX;
- 		break;
- 
-+	case RTL_VER_11:
-+		tp->eee_en		= true;
-+		tp->eee_adv		= MDIO_EEE_1000T | MDIO_EEE_100TX;
-+		fallthrough;
-+	case RTL_VER_10:
-+		ops->init		= r8156_init;
-+		ops->enable		= rtl8156_enable;
-+		ops->disable		= rtl8153_disable;
-+		ops->up			= rtl8156_up;
-+		ops->down		= rtl8156_down;
-+		ops->unload		= rtl8153_unload;
-+		ops->eee_get		= r8153_get_eee;
-+		ops->eee_set		= r8152_set_eee;
-+		ops->in_nway		= rtl8153_in_nway;
-+		ops->hw_phy_cfg		= r8156_hw_phy_cfg;
-+		ops->autosuspend_en	= rtl8156_runtime_enable;
-+		ops->change_mtu		= rtl8156_change_mtu;
-+		tp->rx_buf_sz		= 48 * 1024;
-+		tp->support_2500full	= 1;
-+		break;
-+
-+	case RTL_VER_12:
-+	case RTL_VER_13:
-+		tp->support_2500full	= 1;
-+		fallthrough;
-+	case RTL_VER_15:
-+		tp->eee_en		= true;
-+		tp->eee_adv		= MDIO_EEE_1000T | MDIO_EEE_100TX;
-+		ops->init		= r8156b_init;
-+		ops->enable		= rtl8156b_enable;
-+		ops->disable		= rtl8153_disable;
-+		ops->up			= rtl8156_up;
-+		ops->down		= rtl8156_down;
-+		ops->unload		= rtl8153_unload;
-+		ops->eee_get		= r8153_get_eee;
-+		ops->eee_set		= r8152_set_eee;
-+		ops->in_nway		= rtl8153_in_nway;
-+		ops->hw_phy_cfg		= r8156b_hw_phy_cfg;
-+		ops->autosuspend_en	= rtl8156_runtime_enable;
-+		ops->change_mtu		= rtl8156_change_mtu;
-+		tp->rx_buf_sz		= 48 * 1024;
-+		break;
-+
-+	case RTL_VER_14:
-+		ops->init		= r8153c_init;
-+		ops->enable		= rtl8153_enable;
-+		ops->disable		= rtl8153_disable;
-+		ops->up			= rtl8153c_up;
-+		ops->down		= rtl8153b_down;
-+		ops->unload		= rtl8153_unload;
-+		ops->eee_get		= r8153_get_eee;
-+		ops->eee_set		= r8152_set_eee;
-+		ops->in_nway		= rtl8153_in_nway;
-+		ops->hw_phy_cfg		= r8153c_hw_phy_cfg;
-+		ops->autosuspend_en	= rtl8153c_runtime_enable;
-+		ops->change_mtu		= rtl8153c_change_mtu;
-+		tp->rx_buf_sz		= 32 * 1024;
-+		tp->eee_en		= true;
-+		tp->eee_adv		= MDIO_EEE_1000T | MDIO_EEE_100TX;
-+		break;
-+
- 	default:
- 		ret = -ENODEV;
- 		dev_err(&tp->intf->dev, "Unknown Device\n");
-@@ -6639,11 +8652,13 @@ static int rtl_ops_init(struct r8152 *tp
- #define FIRMWARE_8153A_3	"rtl_nic/rtl8153a-3.fw"
- #define FIRMWARE_8153A_4	"rtl_nic/rtl8153a-4.fw"
- #define FIRMWARE_8153B_2	"rtl_nic/rtl8153b-2.fw"
-+#define FIRMWARE_8153C_1	"rtl_nic/rtl8153c-1.fw"
- 
- MODULE_FIRMWARE(FIRMWARE_8153A_2);
- MODULE_FIRMWARE(FIRMWARE_8153A_3);
- MODULE_FIRMWARE(FIRMWARE_8153A_4);
- MODULE_FIRMWARE(FIRMWARE_8153B_2);
-+MODULE_FIRMWARE(FIRMWARE_8153C_1);
- 
- static int rtl_fw_init(struct r8152 *tp)
- {
-@@ -6669,6 +8684,11 @@ static int rtl_fw_init(struct r8152 *tp)
- 		rtl_fw->pre_fw		= r8153b_pre_firmware_1;
- 		rtl_fw->post_fw		= r8153b_post_firmware_1;
- 		break;
-+	case RTL_VER_14:
-+		rtl_fw->fw_name		= FIRMWARE_8153C_1;
-+		rtl_fw->pre_fw		= r8153b_pre_firmware_1;
-+		rtl_fw->post_fw		= r8153c_post_firmware_1;
-+		break;
- 	default:
- 		break;
- 	}
-@@ -6724,6 +8744,27 @@ u8 rtl8152_get_version(struct usb_interf
- 	case 0x6010:
- 		version = RTL_VER_09;
- 		break;
-+	case 0x7010:
-+		version = RTL_TEST_01;
-+		break;
-+	case 0x7020:
-+		version = RTL_VER_10;
-+		break;
-+	case 0x7030:
-+		version = RTL_VER_11;
-+		break;
-+	case 0x7400:
-+		version = RTL_VER_12;
-+		break;
-+	case 0x7410:
-+		version = RTL_VER_13;
-+		break;
-+	case 0x6400:
-+		version = RTL_VER_14;
-+		break;
-+	case 0x7420:
-+		version = RTL_VER_15;
-+		break;
- 	default:
- 		version = RTL_VER_UNKNOWN;
- 		dev_info(&intf->dev, "Unknown version 0x%04x\n", ocp_data);
-@@ -6836,12 +8877,29 @@ static int rtl8152_probe(struct usb_inte
- 	/* MTU range: 68 - 1500 or 9194 */
- 	netdev->min_mtu = ETH_MIN_MTU;
- 	switch (tp->version) {
-+	case RTL_VER_03:
-+	case RTL_VER_04:
-+	case RTL_VER_05:
-+	case RTL_VER_06:
-+	case RTL_VER_08:
-+	case RTL_VER_09:
-+	case RTL_VER_14:
-+		netdev->max_mtu = size_to_mtu(9 * 1024);
-+		break;
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+		netdev->max_mtu = size_to_mtu(15 * 1024);
-+		break;
-+	case RTL_VER_12:
-+	case RTL_VER_13:
-+	case RTL_VER_15:
-+		netdev->max_mtu = size_to_mtu(16 * 1024);
-+		break;
- 	case RTL_VER_01:
- 	case RTL_VER_02:
--		netdev->max_mtu = ETH_DATA_LEN;
--		break;
-+	case RTL_VER_07:
- 	default:
--		netdev->max_mtu = size_to_mtu(9 * 1024);
-+		netdev->max_mtu = ETH_DATA_LEN;
- 		break;
- 	}
- 
-@@ -6857,7 +8915,13 @@ static int rtl8152_probe(struct usb_inte
- 	tp->advertising = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
- 			  RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL;
- 	if (tp->mii.supports_gmii) {
--		tp->speed = SPEED_1000;
-+		if (tp->support_2500full &&
-+		    tp->udev->speed >= USB_SPEED_SUPER) {
-+			tp->speed = SPEED_2500;
-+			tp->advertising |= RTL_ADVERTISED_2500_FULL;
-+		} else {
-+			tp->speed = SPEED_1000;
-+		}
- 		tp->advertising |= RTL_ADVERTISED_1000_FULL;
- 	}
- 	tp->duplex = DUPLEX_FULL;
-@@ -6881,7 +8945,11 @@ static int rtl8152_probe(struct usb_inte
- 	set_ethernet_addr(tp);
- 
- 	usb_set_intfdata(intf, tp);
--	netif_napi_add(netdev, &tp->napi, r8152_poll, RTL8152_NAPI_WEIGHT);
-+
-+	if (tp->support_2500full)
-+		netif_napi_add(netdev, &tp->napi, r8152_poll, 256);
-+	else
-+		netif_napi_add(netdev, &tp->napi, r8152_poll, 64);
- 
- 	ret = register_netdev(netdev);
- 	if (ret != 0) {
-@@ -6917,7 +8985,8 @@ static void rtl8152_disconnect(struct us
- 		unregister_netdev(tp->netdev);
- 		tasklet_kill(&tp->tx_tl);
- 		cancel_delayed_work_sync(&tp->hw_phy_work);
--		tp->rtl_ops.unload(tp);
-+		if (tp->rtl_ops.unload)
-+			tp->rtl_ops.unload(tp);
- 		rtl8152_release_firmware(tp);
- 		free_netdev(tp->netdev);
- 	}
-@@ -6937,13 +9006,28 @@ static void rtl8152_disconnect(struct us
- 	.idProduct = (prod), \
- 	.bInterfaceClass = USB_CLASS_COMM, \
- 	.bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
-+	.bInterfaceProtocol = USB_CDC_PROTO_NONE \
-+}, \
-+{ \
-+	.match_flags = USB_DEVICE_ID_MATCH_INT_INFO | \
-+		       USB_DEVICE_ID_MATCH_DEVICE, \
-+	.idVendor = (vend), \
-+	.idProduct = (prod), \
-+	.bInterfaceClass = USB_CLASS_COMM, \
-+	.bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, \
- 	.bInterfaceProtocol = USB_CDC_PROTO_NONE
- 
- /* table of devices that work with this driver */
- static const struct usb_device_id rtl8152_table[] = {
-+	/* Realtek */
- 	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8050)},
-+	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8053)},
- 	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8152)},
- 	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)},
-+	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8155)},
-+	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8156)},
-+
-+	/* Microsoft */
- 	{REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab)},
- 	{REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6)},
- 	{REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927)},
diff --git a/target/linux/generic/backport-5.10/794-v5.13-r8152-support-PHY-firmware-for-RTL8156-series.patch b/target/linux/generic/backport-5.10/794-v5.13-r8152-support-PHY-firmware-for-RTL8156-series.patch
deleted file mode 100644
index 40dae54f8c71..000000000000
--- a/target/linux/generic/backport-5.10/794-v5.13-r8152-support-PHY-firmware-for-RTL8156-series.patch
+++ /dev/null
@@ -1,691 +0,0 @@
-From ca09589a72a0aa17389754fb75a5cd1a5d46818f Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 16 Apr 2021 16:04:36 +0800
-Subject: [PATCH] r8152: support PHY firmware for RTL8156 series
-
-commit 4a51b0e8a0143b0e83d51d9c58c6416c3818a9f2 upstream.
-
-Support new firmware type and method for RTL8156 series.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 563 +++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 561 insertions(+), 2 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -974,8 +974,60 @@ enum rtl8152_fw_flags {
- 	FW_FLAGS_START,
- 	FW_FLAGS_STOP,
- 	FW_FLAGS_NC,
-+	FW_FLAGS_NC1,
-+	FW_FLAGS_NC2,
-+	FW_FLAGS_UC2,
-+	FW_FLAGS_UC,
-+	FW_FLAGS_SPEED_UP,
-+	FW_FLAGS_VER,
- };
- 
-+enum rtl8152_fw_fixup_cmd {
-+	FW_FIXUP_AND = 0,
-+	FW_FIXUP_OR,
-+	FW_FIXUP_NOT,
-+	FW_FIXUP_XOR,
-+};
-+
-+struct fw_phy_set {
-+	__le16 addr;
-+	__le16 data;
-+} __packed;
-+
-+struct fw_phy_speed_up {
-+	struct fw_block blk_hdr;
-+	__le16 fw_offset;
-+	__le16 version;
-+	__le16 fw_reg;
-+	__le16 reserved;
-+	char info[];
-+} __packed;
-+
-+struct fw_phy_ver {
-+	struct fw_block blk_hdr;
-+	struct fw_phy_set ver;
-+	__le32 reserved;
-+} __packed;
-+
-+struct fw_phy_fixup {
-+	struct fw_block blk_hdr;
-+	struct fw_phy_set setting;
-+	__le16 bit_cmd;
-+	__le16 reserved;
-+} __packed;
-+
-+struct fw_phy_union {
-+	struct fw_block blk_hdr;
-+	__le16 fw_offset;
-+	__le16 fw_reg;
-+	struct fw_phy_set pre_set[2];
-+	struct fw_phy_set bp[8];
-+	struct fw_phy_set bp_en;
-+	u8 pre_num;
-+	u8 bp_num;
-+	char info[];
-+} __packed;
-+
- /**
-  * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
-  *	The layout of the firmware block is:
-@@ -1080,6 +1132,15 @@ enum rtl_fw_type {
- 	RTL_FW_PHY_START,
- 	RTL_FW_PHY_STOP,
- 	RTL_FW_PHY_NC,
-+	RTL_FW_PHY_FIXUP,
-+	RTL_FW_PHY_UNION_NC,
-+	RTL_FW_PHY_UNION_NC1,
-+	RTL_FW_PHY_UNION_NC2,
-+	RTL_FW_PHY_UNION_UC2,
-+	RTL_FW_PHY_UNION_UC,
-+	RTL_FW_PHY_UNION_MISC,
-+	RTL_FW_PHY_SPEED_UP,
-+	RTL_FW_PHY_VER,
- };
- 
- enum rtl_version {
-@@ -4001,6 +4062,162 @@ static int rtl_post_ram_code(struct r815
- 	return 0;
- }
- 
-+static bool rtl8152_is_fw_phy_speed_up_ok(struct r8152 *tp, struct fw_phy_speed_up *phy)
-+{
-+	u16 fw_offset;
-+	u32 length;
-+	bool rc = false;
-+
-+	switch (tp->version) {
-+	case RTL_VER_01:
-+	case RTL_VER_02:
-+	case RTL_VER_03:
-+	case RTL_VER_04:
-+	case RTL_VER_05:
-+	case RTL_VER_06:
-+	case RTL_VER_07:
-+	case RTL_VER_08:
-+	case RTL_VER_09:
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+	case RTL_VER_12:
-+	case RTL_VER_14:
-+		goto out;
-+	case RTL_VER_13:
-+	case RTL_VER_15:
-+	default:
-+		break;
-+	}
-+
-+	fw_offset = __le16_to_cpu(phy->fw_offset);
-+	length = __le32_to_cpu(phy->blk_hdr.length);
-+	if (fw_offset < sizeof(*phy) || length <= fw_offset) {
-+		dev_err(&tp->intf->dev, "invalid fw_offset\n");
-+		goto out;
-+	}
-+
-+	length -= fw_offset;
-+	if (length & 3) {
-+		dev_err(&tp->intf->dev, "invalid block length\n");
-+		goto out;
-+	}
-+
-+	if (__le16_to_cpu(phy->fw_reg) != 0x9A00) {
-+		dev_err(&tp->intf->dev, "invalid register to load firmware\n");
-+		goto out;
-+	}
-+
-+	rc = true;
-+out:
-+	return rc;
-+}
-+
-+static bool rtl8152_is_fw_phy_ver_ok(struct r8152 *tp, struct fw_phy_ver *ver)
-+{
-+	bool rc = false;
-+
-+	switch (tp->version) {
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+	case RTL_VER_12:
-+	case RTL_VER_13:
-+	case RTL_VER_15:
-+		break;
-+	default:
-+		goto out;
-+	}
-+
-+	if (__le32_to_cpu(ver->blk_hdr.length) != sizeof(*ver)) {
-+		dev_err(&tp->intf->dev, "invalid block length\n");
-+		goto out;
-+	}
-+
-+	if (__le16_to_cpu(ver->ver.addr) != SRAM_GPHY_FW_VER) {
-+		dev_err(&tp->intf->dev, "invalid phy ver addr\n");
-+		goto out;
-+	}
-+
-+	rc = true;
-+out:
-+	return rc;
-+}
-+
-+static bool rtl8152_is_fw_phy_fixup_ok(struct r8152 *tp, struct fw_phy_fixup *fix)
-+{
-+	bool rc = false;
-+
-+	switch (tp->version) {
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+	case RTL_VER_12:
-+	case RTL_VER_13:
-+	case RTL_VER_15:
-+		break;
-+	default:
-+		goto out;
-+	}
-+
-+	if (__le32_to_cpu(fix->blk_hdr.length) != sizeof(*fix)) {
-+		dev_err(&tp->intf->dev, "invalid block length\n");
-+		goto out;
-+	}
-+
-+	if (__le16_to_cpu(fix->setting.addr) != OCP_PHY_PATCH_CMD ||
-+	    __le16_to_cpu(fix->setting.data) != BIT(7)) {
-+		dev_err(&tp->intf->dev, "invalid phy fixup\n");
-+		goto out;
-+	}
-+
-+	rc = true;
-+out:
-+	return rc;
-+}
-+
-+static bool rtl8152_is_fw_phy_union_ok(struct r8152 *tp, struct fw_phy_union *phy)
-+{
-+	u16 fw_offset;
-+	u32 length;
-+	bool rc = false;
-+
-+	switch (tp->version) {
-+	case RTL_VER_10:
-+	case RTL_VER_11:
-+	case RTL_VER_12:
-+	case RTL_VER_13:
-+	case RTL_VER_15:
-+		break;
-+	default:
-+		goto out;
-+	}
-+
-+	fw_offset = __le16_to_cpu(phy->fw_offset);
-+	length = __le32_to_cpu(phy->blk_hdr.length);
-+	if (fw_offset < sizeof(*phy) || length <= fw_offset) {
-+		dev_err(&tp->intf->dev, "invalid fw_offset\n");
-+		goto out;
-+	}
-+
-+	length -= fw_offset;
-+	if (length & 1) {
-+		dev_err(&tp->intf->dev, "invalid block length\n");
-+		goto out;
-+	}
-+
-+	if (phy->pre_num > 2) {
-+		dev_err(&tp->intf->dev, "invalid pre_num %d\n", phy->pre_num);
-+		goto out;
-+	}
-+
-+	if (phy->bp_num > 8) {
-+		dev_err(&tp->intf->dev, "invalid bp_num %d\n", phy->bp_num);
-+		goto out;
-+	}
-+
-+	rc = true;
-+out:
-+	return rc;
-+}
-+
- static bool rtl8152_is_fw_phy_nc_ok(struct r8152 *tp, struct fw_phy_nc *phy)
- {
- 	u32 length;
-@@ -4321,6 +4538,10 @@ static long rtl8152_check_firmware(struc
- 		case RTL_FW_PHY_START:
- 			if (test_bit(FW_FLAGS_START, &fw_flags) ||
- 			    test_bit(FW_FLAGS_NC, &fw_flags) ||
-+			    test_bit(FW_FLAGS_NC1, &fw_flags) ||
-+			    test_bit(FW_FLAGS_NC2, &fw_flags) ||
-+			    test_bit(FW_FLAGS_UC2, &fw_flags) ||
-+			    test_bit(FW_FLAGS_UC, &fw_flags) ||
- 			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
- 				dev_err(&tp->intf->dev,
- 					"check PHY_START fail\n");
-@@ -4369,7 +4590,153 @@ static long rtl8152_check_firmware(struc
- 				goto fail;
- 			}
- 			__set_bit(FW_FLAGS_NC, &fw_flags);
-+			break;
-+		case RTL_FW_PHY_UNION_NC:
-+			if (!test_bit(FW_FLAGS_START, &fw_flags) ||
-+			    test_bit(FW_FLAGS_NC1, &fw_flags) ||
-+			    test_bit(FW_FLAGS_NC2, &fw_flags) ||
-+			    test_bit(FW_FLAGS_UC2, &fw_flags) ||
-+			    test_bit(FW_FLAGS_UC, &fw_flags) ||
-+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "PHY_UNION_NC out of order\n");
-+				goto fail;
-+			}
-+
-+			if (test_bit(FW_FLAGS_NC, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "multiple PHY_UNION_NC encountered\n");
-+				goto fail;
-+			}
- 
-+			if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
-+				dev_err(&tp->intf->dev, "check PHY_UNION_NC failed\n");
-+				goto fail;
-+			}
-+			__set_bit(FW_FLAGS_NC, &fw_flags);
-+			break;
-+		case RTL_FW_PHY_UNION_NC1:
-+			if (!test_bit(FW_FLAGS_START, &fw_flags) ||
-+			    test_bit(FW_FLAGS_NC2, &fw_flags) ||
-+			    test_bit(FW_FLAGS_UC2, &fw_flags) ||
-+			    test_bit(FW_FLAGS_UC, &fw_flags) ||
-+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "PHY_UNION_NC1 out of order\n");
-+				goto fail;
-+			}
-+
-+			if (test_bit(FW_FLAGS_NC1, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "multiple PHY NC1 encountered\n");
-+				goto fail;
-+			}
-+
-+			if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
-+				dev_err(&tp->intf->dev, "check PHY_UNION_NC1 failed\n");
-+				goto fail;
-+			}
-+			__set_bit(FW_FLAGS_NC1, &fw_flags);
-+			break;
-+		case RTL_FW_PHY_UNION_NC2:
-+			if (!test_bit(FW_FLAGS_START, &fw_flags) ||
-+			    test_bit(FW_FLAGS_UC2, &fw_flags) ||
-+			    test_bit(FW_FLAGS_UC, &fw_flags) ||
-+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "PHY_UNION_NC2 out of order\n");
-+				goto fail;
-+			}
-+
-+			if (test_bit(FW_FLAGS_NC2, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "multiple PHY NC2 encountered\n");
-+				goto fail;
-+			}
-+
-+			if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
-+				dev_err(&tp->intf->dev, "check PHY_UNION_NC2 failed\n");
-+				goto fail;
-+			}
-+			__set_bit(FW_FLAGS_NC2, &fw_flags);
-+			break;
-+		case RTL_FW_PHY_UNION_UC2:
-+			if (!test_bit(FW_FLAGS_START, &fw_flags) ||
-+			    test_bit(FW_FLAGS_UC, &fw_flags) ||
-+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "PHY_UNION_UC2 out of order\n");
-+				goto fail;
-+			}
-+
-+			if (test_bit(FW_FLAGS_UC2, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "multiple PHY UC2 encountered\n");
-+				goto fail;
-+			}
-+
-+			if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
-+				dev_err(&tp->intf->dev, "check PHY_UNION_UC2 failed\n");
-+				goto fail;
-+			}
-+			__set_bit(FW_FLAGS_UC2, &fw_flags);
-+			break;
-+		case RTL_FW_PHY_UNION_UC:
-+			if (!test_bit(FW_FLAGS_START, &fw_flags) ||
-+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "PHY_UNION_UC out of order\n");
-+				goto fail;
-+			}
-+
-+			if (test_bit(FW_FLAGS_UC, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "multiple PHY UC encountered\n");
-+				goto fail;
-+			}
-+
-+			if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
-+				dev_err(&tp->intf->dev, "check PHY_UNION_UC failed\n");
-+				goto fail;
-+			}
-+			__set_bit(FW_FLAGS_UC, &fw_flags);
-+			break;
-+		case RTL_FW_PHY_UNION_MISC:
-+			if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
-+				dev_err(&tp->intf->dev, "check RTL_FW_PHY_UNION_MISC failed\n");
-+				goto fail;
-+			}
-+			break;
-+		case RTL_FW_PHY_FIXUP:
-+			if (!rtl8152_is_fw_phy_fixup_ok(tp, (struct fw_phy_fixup *)block)) {
-+				dev_err(&tp->intf->dev, "check PHY fixup failed\n");
-+				goto fail;
-+			}
-+			break;
-+		case RTL_FW_PHY_SPEED_UP:
-+			if (test_bit(FW_FLAGS_SPEED_UP, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "multiple PHY firmware encountered");
-+				goto fail;
-+			}
-+
-+			if (!rtl8152_is_fw_phy_speed_up_ok(tp, (struct fw_phy_speed_up *)block)) {
-+				dev_err(&tp->intf->dev, "check PHY speed up failed\n");
-+				goto fail;
-+			}
-+			__set_bit(FW_FLAGS_SPEED_UP, &fw_flags);
-+			break;
-+		case RTL_FW_PHY_VER:
-+			if (test_bit(FW_FLAGS_START, &fw_flags) ||
-+			    test_bit(FW_FLAGS_NC, &fw_flags) ||
-+			    test_bit(FW_FLAGS_NC1, &fw_flags) ||
-+			    test_bit(FW_FLAGS_NC2, &fw_flags) ||
-+			    test_bit(FW_FLAGS_UC2, &fw_flags) ||
-+			    test_bit(FW_FLAGS_UC, &fw_flags) ||
-+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "Invalid order to set PHY version\n");
-+				goto fail;
-+			}
-+
-+			if (test_bit(FW_FLAGS_VER, &fw_flags)) {
-+				dev_err(&tp->intf->dev, "multiple PHY version encountered");
-+				goto fail;
-+			}
-+
-+			if (!rtl8152_is_fw_phy_ver_ok(tp, (struct fw_phy_ver *)block)) {
-+				dev_err(&tp->intf->dev, "check PHY version failed\n");
-+				goto fail;
-+			}
-+			__set_bit(FW_FLAGS_VER, &fw_flags);
- 			break;
- 		default:
- 			dev_warn(&tp->intf->dev, "Unknown type %u is found\n",
-@@ -4392,6 +4759,143 @@ fail:
- 	return ret;
- }
- 
-+static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy, bool wait)
-+{
-+	u32 len;
-+	u8 *data;
-+
-+	if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) {
-+		dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
-+		return;
-+	}
-+
-+	len = __le32_to_cpu(phy->blk_hdr.length);
-+	len -= __le16_to_cpu(phy->fw_offset);
-+	data = (u8 *)phy + __le16_to_cpu(phy->fw_offset);
-+
-+	if (rtl_phy_patch_request(tp, true, wait))
-+		return;
-+
-+	while (len) {
-+		u32 ocp_data, size;
-+		int i;
-+
-+		if (len < 2048)
-+			size = len;
-+		else
-+			size = 2048;
-+
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL);
-+		ocp_data |= GPHY_PATCH_DONE | BACKUP_RESTRORE;
-+		ocp_write_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL, ocp_data);
-+
-+		generic_ocp_write(tp, __le16_to_cpu(phy->fw_reg), 0xff, size, data, MCU_TYPE_USB);
-+
-+		data += size;
-+		len -= size;
-+
-+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL);
-+		ocp_data |= POL_GPHY_PATCH;
-+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL, ocp_data);
-+
-+		for (i = 0; i < 1000; i++) {
-+			if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & POL_GPHY_PATCH))
-+				break;
-+		}
-+
-+		if (i == 1000) {
-+			dev_err(&tp->intf->dev, "ram code speedup mode timeout\n");
-+			return;
-+		}
-+	}
-+
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
-+	rtl_phy_patch_request(tp, false, wait);
-+
-+	if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version))
-+		dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
-+	else
-+		dev_err(&tp->intf->dev, "ram code speedup mode fail\n");
-+}
-+
-+static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver)
-+{
-+	u16 ver_addr, ver;
-+
-+	ver_addr = __le16_to_cpu(phy_ver->ver.addr);
-+	ver = __le16_to_cpu(phy_ver->ver.data);
-+
-+	if (sram_read(tp, ver_addr) >= ver) {
-+		dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
-+		return 0;
-+	}
-+
-+	sram_write(tp, ver_addr, ver);
-+
-+	dev_dbg(&tp->intf->dev, "PHY firmware version %x\n", ver);
-+
-+	return ver;
-+}
-+
-+static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix)
-+{
-+	u16 addr, data;
-+
-+	addr = __le16_to_cpu(fix->setting.addr);
-+	data = ocp_reg_read(tp, addr);
-+
-+	switch (__le16_to_cpu(fix->bit_cmd)) {
-+	case FW_FIXUP_AND:
-+		data &= __le16_to_cpu(fix->setting.data);
-+		break;
-+	case FW_FIXUP_OR:
-+		data |= __le16_to_cpu(fix->setting.data);
-+		break;
-+	case FW_FIXUP_NOT:
-+		data &= ~__le16_to_cpu(fix->setting.data);
-+		break;
-+	case FW_FIXUP_XOR:
-+		data ^= __le16_to_cpu(fix->setting.data);
-+		break;
-+	default:
-+		return;
-+	}
-+
-+	ocp_reg_write(tp, addr, data);
-+
-+	dev_dbg(&tp->intf->dev, "applied ocp %x %x\n", addr, data);
-+}
-+
-+static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *phy)
-+{
-+	__le16 *data;
-+	u32 length;
-+	int i, num;
-+
-+	num = phy->pre_num;
-+	for (i = 0; i < num; i++)
-+		sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr),
-+			   __le16_to_cpu(phy->pre_set[i].data));
-+
-+	length = __le32_to_cpu(phy->blk_hdr.length);
-+	length -= __le16_to_cpu(phy->fw_offset);
-+	num = length / 2;
-+	data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset));
-+
-+	ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg));
-+	for (i = 0; i < num; i++)
-+		ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i]));
-+
-+	num = phy->bp_num;
-+	for (i = 0; i < num; i++)
-+		sram_write(tp, __le16_to_cpu(phy->bp[i].addr), __le16_to_cpu(phy->bp[i].data));
-+
-+	if (phy->bp_num && phy->bp_en.addr)
-+		sram_write(tp, __le16_to_cpu(phy->bp_en.addr), __le16_to_cpu(phy->bp_en.data));
-+
-+	dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
-+}
-+
- static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
- {
- 	u16 mode_reg, bp_index;
-@@ -4445,6 +4949,12 @@ static void rtl8152_fw_mac_apply(struct
- 		return;
- 	}
- 
-+	fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
-+	if (fw_ver_reg && ocp_read_byte(tp, MCU_TYPE_USB, fw_ver_reg) >= mac->fw_ver_data) {
-+		dev_dbg(&tp->intf->dev, "%s firmware has been the newest\n", type ? "PLA" : "USB");
-+		return;
-+	}
-+
- 	rtl_clear_bp(tp, type);
- 
- 	/* Enable backup/restore of MACDBG. This is required after clearing PLA
-@@ -4480,7 +4990,6 @@ static void rtl8152_fw_mac_apply(struct
- 		ocp_write_word(tp, type, bp_en_addr,
- 			       __le16_to_cpu(mac->bp_en_value));
- 
--	fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
- 	if (fw_ver_reg)
- 		ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
- 			       mac->fw_ver_data);
-@@ -4495,7 +5004,7 @@ static void rtl8152_apply_firmware(struc
- 	struct fw_header *fw_hdr;
- 	struct fw_phy_patch_key *key;
- 	u16 key_addr = 0;
--	int i;
-+	int i, patch_phy = 1;
- 
- 	if (IS_ERR_OR_NULL(rtl_fw->fw))
- 		return;
-@@ -4517,17 +5026,40 @@ static void rtl8152_apply_firmware(struc
- 			rtl8152_fw_mac_apply(tp, (struct fw_mac *)block);
- 			break;
- 		case RTL_FW_PHY_START:
-+			if (!patch_phy)
-+				break;
- 			key = (struct fw_phy_patch_key *)block;
- 			key_addr = __le16_to_cpu(key->key_reg);
- 			rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut);
- 			break;
- 		case RTL_FW_PHY_STOP:
-+			if (!patch_phy)
-+				break;
- 			WARN_ON(!key_addr);
- 			rtl_post_ram_code(tp, key_addr, !power_cut);
- 			break;
- 		case RTL_FW_PHY_NC:
- 			rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
- 			break;
-+		case RTL_FW_PHY_VER:
-+			patch_phy = rtl8152_fw_phy_ver(tp, (struct fw_phy_ver *)block);
-+			break;
-+		case RTL_FW_PHY_UNION_NC:
-+		case RTL_FW_PHY_UNION_NC1:
-+		case RTL_FW_PHY_UNION_NC2:
-+		case RTL_FW_PHY_UNION_UC2:
-+		case RTL_FW_PHY_UNION_UC:
-+		case RTL_FW_PHY_UNION_MISC:
-+			if (patch_phy)
-+				rtl8152_fw_phy_union_apply(tp, (struct fw_phy_union *)block);
-+			break;
-+		case RTL_FW_PHY_FIXUP:
-+			if (patch_phy)
-+				rtl8152_fw_phy_fixup(tp, (struct fw_phy_fixup *)block);
-+			break;
-+		case RTL_FW_PHY_SPEED_UP:
-+			rtl_ram_code_speed_up(tp, (struct fw_phy_speed_up *)block, !power_cut);
-+			break;
- 		default:
- 			break;
- 		}
-@@ -5035,6 +5567,21 @@ static int r8153c_post_firmware_1(struct
- 	return 0;
- }
- 
-+static int r8156a_post_firmware_1(struct r8152 *tp)
-+{
-+	u32 ocp_data;
-+
-+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
-+	ocp_data |= FW_IP_RESET_EN;
-+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
-+
-+	/* Modify U3PHY parameter for compatibility issue */
-+	ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4026840e);
-+	ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4001acc9);
-+
-+	return 0;
-+}
-+
- static void r8153_aldps_en(struct r8152 *tp, bool enable)
- {
- 	u16 data;
-@@ -8653,12 +9200,16 @@ static int rtl_ops_init(struct r8152 *tp
- #define FIRMWARE_8153A_4	"rtl_nic/rtl8153a-4.fw"
- #define FIRMWARE_8153B_2	"rtl_nic/rtl8153b-2.fw"
- #define FIRMWARE_8153C_1	"rtl_nic/rtl8153c-1.fw"
-+#define FIRMWARE_8156A_2	"rtl_nic/rtl8156a-2.fw"
-+#define FIRMWARE_8156B_2	"rtl_nic/rtl8156b-2.fw"
- 
- MODULE_FIRMWARE(FIRMWARE_8153A_2);
- MODULE_FIRMWARE(FIRMWARE_8153A_3);
- MODULE_FIRMWARE(FIRMWARE_8153A_4);
- MODULE_FIRMWARE(FIRMWARE_8153B_2);
- MODULE_FIRMWARE(FIRMWARE_8153C_1);
-+MODULE_FIRMWARE(FIRMWARE_8156A_2);
-+MODULE_FIRMWARE(FIRMWARE_8156B_2);
- 
- static int rtl_fw_init(struct r8152 *tp)
- {
-@@ -8684,6 +9235,14 @@ static int rtl_fw_init(struct r8152 *tp)
- 		rtl_fw->pre_fw		= r8153b_pre_firmware_1;
- 		rtl_fw->post_fw		= r8153b_post_firmware_1;
- 		break;
-+	case RTL_VER_11:
-+		rtl_fw->fw_name		= FIRMWARE_8156A_2;
-+		rtl_fw->post_fw		= r8156a_post_firmware_1;
-+		break;
-+	case RTL_VER_13:
-+	case RTL_VER_15:
-+		rtl_fw->fw_name		= FIRMWARE_8156B_2;
-+		break;
- 	case RTL_VER_14:
- 		rtl_fw->fw_name		= FIRMWARE_8153C_1;
- 		rtl_fw->pre_fw		= r8153b_pre_firmware_1;
diff --git a/target/linux/generic/backport-5.10/795-v5.13-r8152-search-the-configuration-of-vendor-mode.patch b/target/linux/generic/backport-5.10/795-v5.13-r8152-search-the-configuration-of-vendor-mode.patch
deleted file mode 100644
index 751ff3d30ca6..000000000000
--- a/target/linux/generic/backport-5.10/795-v5.13-r8152-search-the-configuration-of-vendor-mode.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 579f58dd2819910354753bc5489fc1588fe9cfe2 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 16 Apr 2021 16:04:37 +0800
-Subject: [PATCH] r8152: search the configuration of vendor mode
-
-commit c2198943e33b100ed21dfb636c8fa6baef841e9d upstream.
-
-The vendor mode is not always at config #1, so it is necessary to
-set the correct configuration number.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 39 +++++++++++++++++++++++++++++++++++----
- 1 file changed, 35 insertions(+), 4 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -29,7 +29,7 @@
- #include <linux/usb/r8152.h>
- 
- /* Information for net-next */
--#define NETNEXT_VERSION		"11"
-+#define NETNEXT_VERSION		"12"
- 
- /* Information for net */
- #define NET_VERSION		"11"
-@@ -8110,6 +8110,39 @@ static void r8156b_init(struct r8152 *tp
- 	tp->coalesce = 15000;	/* 15 us */
- }
- 
-+static bool rtl_vendor_mode(struct usb_interface *intf)
-+{
-+	struct usb_host_interface *alt = intf->cur_altsetting;
-+	struct usb_device *udev;
-+	struct usb_host_config *c;
-+	int i, num_configs;
-+
-+	if (alt->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC)
-+		return true;
-+
-+	/* The vendor mode is not always config #1, so to find it out. */
-+	udev = interface_to_usbdev(intf);
-+	c = udev->config;
-+	num_configs = udev->descriptor.bNumConfigurations;
-+	for (i = 0; i < num_configs; (i++, c++)) {
-+		struct usb_interface_descriptor	*desc = NULL;
-+
-+		if (c->desc.bNumInterfaces > 0)
-+			desc = &c->intf_cache[0]->altsetting->desc;
-+		else
-+			continue;
-+
-+		if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
-+			usb_driver_set_configuration(udev, c->desc.bConfigurationValue);
-+			break;
-+		}
-+	}
-+
-+	WARN_ON_ONCE(i == num_configs);
-+
-+	return false;
-+}
-+
- static int rtl8152_pre_reset(struct usb_interface *intf)
- {
- 	struct r8152 *tp = usb_get_intfdata(intf);
-@@ -9348,10 +9381,8 @@ static int rtl8152_probe(struct usb_inte
- 	if (version == RTL_VER_UNKNOWN)
- 		return -ENODEV;
- 
--	if (udev->actconfig->desc.bConfigurationValue != 1) {
--		usb_driver_set_configuration(udev, 1);
-+	if (!rtl_vendor_mode(intf))
- 		return -ENODEV;
--	}
- 
- 	if (intf->cur_altsetting->desc.bNumEndpoints < 3)
- 		return -ENODEV;
diff --git a/target/linux/generic/backport-5.10/796-v5.14-net-phy-realtek-add-dt-property-to-disable-CLKOUT-cl.patch b/target/linux/generic/backport-5.10/796-v5.14-net-phy-realtek-add-dt-property-to-disable-CLKOUT-cl.patch
deleted file mode 100644
index 52a6f83500bf..000000000000
--- a/target/linux/generic/backport-5.10/796-v5.14-net-phy-realtek-add-dt-property-to-disable-CLKOUT-cl.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 0a4355c2b7f8ecd5e61cc262ecdbd4a2cce1ea7e Mon Sep 17 00:00:00 2001
-From: Joakim Zhang <qiangqing.zhang@nxp.com>
-Date: Tue, 8 Jun 2021 11:15:33 +0800
-Subject: [PATCH] net: phy: realtek: add dt property to disable CLKOUT clock
-
-CLKOUT is enabled by default after PHY hardware reset, this patch adds
-"realtek,clkout-disable" property for user to disable CLKOUT clock
-to save PHY power.
-
-Per RTL8211F guide, a PHY reset should be issued after setting these
-bits in PHYCR2 register. After this patch, CLKOUT clock output to be
-disabled.
-
-Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/realtek.c | 42 ++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 41 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -8,6 +8,7 @@
-  * Copyright (c) 2004 Freescale Semiconductor, Inc.
-  */
- #include <linux/bitops.h>
-+#include <linux/of.h>
- #include <linux/phy.h>
- #include <linux/module.h>
- #include <linux/delay.h>
-@@ -27,6 +28,7 @@
- #define RTL821x_PAGE_SELECT			0x1f
- 
- #define RTL8211F_PHYCR1				0x18
-+#define RTL8211F_PHYCR2				0x19
- #define RTL8211F_INSR				0x1d
- 
- #define RTL8211F_TX_DELAY			BIT(8)
-@@ -40,6 +42,8 @@
- #define RTL8211E_TX_DELAY			BIT(12)
- #define RTL8211E_RX_DELAY			BIT(11)
- 
-+#define RTL8211F_CLKOUT_EN			BIT(0)
-+
- #define RTL8201F_ISR				0x1e
- #define RTL8201F_IER				0x13
- 
-@@ -62,6 +66,10 @@ MODULE_DESCRIPTION("Realtek PHY driver")
- MODULE_AUTHOR("Johnson Leung");
- MODULE_LICENSE("GPL");
- 
-+struct rtl821x_priv {
-+	u16 phycr2;
-+};
-+
- static int rtl821x_read_page(struct phy_device *phydev)
- {
- 	return __phy_read(phydev, RTL821x_PAGE_SELECT);
-@@ -72,6 +80,28 @@ static int rtl821x_write_page(struct phy
- 	return __phy_write(phydev, RTL821x_PAGE_SELECT, page);
- }
- 
-+static int rtl821x_probe(struct phy_device *phydev)
-+{
-+	struct device *dev = &phydev->mdio.dev;
-+	struct rtl821x_priv *priv;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->phycr2 = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR2);
-+	if (priv->phycr2 < 0)
-+		return priv->phycr2;
-+
-+	priv->phycr2 &= RTL8211F_CLKOUT_EN;
-+	if (of_property_read_bool(dev->of_node, "realtek,clkout-disable"))
-+		priv->phycr2 &= ~RTL8211F_CLKOUT_EN;
-+
-+	phydev->priv = priv;
-+
-+	return 0;
-+}
-+
- static int rtl8201_ack_interrupt(struct phy_device *phydev)
- {
- 	int err;
-@@ -180,6 +210,7 @@ static int rtl8211c_config_init(struct p
- 
- static int rtl8211f_config_init(struct phy_device *phydev)
- {
-+	struct rtl821x_priv *priv = phydev->priv;
- 	struct device *dev = &phydev->mdio.dev;
- 	u16 val_txdly, val_rxdly;
- 	u16 val;
-@@ -243,7 +274,15 @@ static int rtl8211f_config_init(struct p
- 			val_rxdly ? "enabled" : "disabled");
- 	}
- 
--	return 0;
-+	ret = phy_modify_paged(phydev, 0xa43, RTL8211F_PHYCR2,
-+			       RTL8211F_CLKOUT_EN, priv->phycr2);
-+	if (ret < 0) {
-+		dev_err(dev, "clkout configuration failed: %pe\n",
-+			ERR_PTR(ret));
-+		return ret;
-+	}
-+
-+	return genphy_soft_reset(phydev);
- }
- 
- static int rtl821x_resume(struct phy_device *phydev)
-@@ -633,6 +672,7 @@ static struct phy_driver realtek_drvs[]
- 	}, {
- 		PHY_ID_MATCH_EXACT(0x001cc916),
- 		.name		= "RTL8211F Gigabit Ethernet",
-+		.probe		= rtl821x_probe,
- 		.config_init	= &rtl8211f_config_init,
- 		.ack_interrupt	= &rtl8211f_ack_interrupt,
- 		.config_intr	= &rtl8211f_config_intr,
diff --git a/target/linux/generic/backport-5.10/797-v5.17-net-usb-ax88179_178a-add-TSO-feature.patch b/target/linux/generic/backport-5.10/797-v5.17-net-usb-ax88179_178a-add-TSO-feature.patch
deleted file mode 100644
index a2168aaba5f6..000000000000
--- a/target/linux/generic/backport-5.10/797-v5.17-net-usb-ax88179_178a-add-TSO-feature.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 16b1c4e01c89ba07367461e0bc4cb84993c2d027 Mon Sep 17 00:00:00 2001
-From: Jacky Chou <jackychou@asix.com.tw>
-Date: Mon, 15 Nov 2021 11:49:41 +0800
-Subject: [PATCH] net: usb: ax88179_178a: add TSO feature
-
-On low-effciency embedded platforms, transmission performance is poor
-due to on Bulk-out with single packet.
-Adding TSO feature improves the transmission performance and reduces
-the number of interrupt caused by Bulk-out complete.
-
-Reference to module, net: usb: aqc111.
-
-Signed-off-by: Jacky Chou <jackychou@asix.com.tw>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/ax88179_178a.c | 17 +++++++++++------
- 1 file changed, 11 insertions(+), 6 deletions(-)
-
---- a/drivers/net/usb/ax88179_178a.c
-+++ b/drivers/net/usb/ax88179_178a.c
-@@ -1377,11 +1377,12 @@ static int ax88179_bind(struct usbnet *d
- 	dev->mii.phy_id = 0x03;
- 	dev->mii.supports_gmii = 1;
- 
--	dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
--			      NETIF_F_RXCSUM;
-+	dev->net->features |= NETIF_F_SG | NETIF_F_IP_CSUM |
-+			      NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM | NETIF_F_TSO;
- 
--	dev->net->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
--				 NETIF_F_RXCSUM;
-+	dev->net->hw_features |= dev->net->features;
-+
-+	netif_set_gso_max_size(dev->net, 16384);
- 
- 	/* Enable checksum offload */
- 	*tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
-@@ -1587,17 +1588,19 @@ ax88179_tx_fixup(struct usbnet *dev, str
- {
- 	u32 tx_hdr1, tx_hdr2;
- 	int frame_size = dev->maxpacket;
--	int mss = skb_shinfo(skb)->gso_size;
- 	int headroom;
- 	void *ptr;
- 
- 	tx_hdr1 = skb->len;
--	tx_hdr2 = mss;
-+	tx_hdr2 = skb_shinfo(skb)->gso_size; /* Set TSO mss */
- 	if (((skb->len + 8) % frame_size) == 0)
- 		tx_hdr2 |= 0x80008000;	/* Enable padding */
- 
- 	headroom = skb_headroom(skb) - 8;
- 
-+	if ((dev->net->features & NETIF_F_SG) && skb_linearize(skb))
-+		return NULL;
-+
- 	if ((skb_header_cloned(skb) || headroom < 0) &&
- 	    pskb_expand_head(skb, headroom < 0 ? 8 : 0, 0, GFP_ATOMIC)) {
- 		dev_kfree_skb_any(skb);
-@@ -1608,6 +1611,8 @@ ax88179_tx_fixup(struct usbnet *dev, str
- 	put_unaligned_le32(tx_hdr1, ptr);
- 	put_unaligned_le32(tx_hdr2, ptr + 4);
- 
-+	usbnet_set_skb_tx_stats(skb, (skb_shinfo(skb)->gso_segs ?: 1), 0);
-+
- 	return skb;
- }
- 
diff --git a/target/linux/generic/backport-5.10/800-v5.13-0001-firmware-bcm47xx_nvram-rename-finding-function-and-i.patch b/target/linux/generic/backport-5.10/800-v5.13-0001-firmware-bcm47xx_nvram-rename-finding-function-and-i.patch
deleted file mode 100644
index 19938704b7b8..000000000000
--- a/target/linux/generic/backport-5.10/800-v5.13-0001-firmware-bcm47xx_nvram-rename-finding-function-and-i.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From fb009cbdd0693bd633f11e99526617b3d392cfad Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 8 Mar 2021 10:03:16 +0100
-Subject: [PATCH] firmware: bcm47xx_nvram: rename finding function and its
- variables
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Use "bcm47xx_" function name prefix for consistency
-2. It takes flash start as argument so s/iobase/flash_start/
-3. "off" was used for finding flash end so just call it "flash_size"
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 24 ++++++++++++-----------
- 1 file changed, 13 insertions(+), 11 deletions(-)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -48,11 +48,13 @@ static u32 find_nvram_size(void __iomem
- 	return 0;
- }
- 
--/* Probe for NVRAM header */
--static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
-+/**
-+ * bcm47xx_nvram_find_and_copy - find NVRAM on flash mapping & copy it
-+ */
-+static int bcm47xx_nvram_find_and_copy(void __iomem *flash_start, size_t res_size)
- {
- 	struct nvram_header __iomem *header;
--	u32 off;
-+	size_t flash_size;
- 	u32 size;
- 
- 	if (nvram_len) {
-@@ -61,25 +63,25 @@ static int nvram_find_and_copy(void __io
- 	}
- 
- 	/* TODO: when nvram is on nand flash check for bad blocks first. */
--	off = FLASH_MIN;
--	while (off <= lim) {
-+	flash_size = FLASH_MIN;
-+	while (flash_size <= res_size) {
- 		/* Windowed flash access */
--		size = find_nvram_size(iobase + off);
-+		size = find_nvram_size(flash_start + flash_size);
- 		if (size) {
--			header = (struct nvram_header *)(iobase + off - size);
-+			header = (struct nvram_header *)(flash_start + flash_size - size);
- 			goto found;
- 		}
--		off <<= 1;
-+		flash_size <<= 1;
- 	}
- 
- 	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
--	header = (struct nvram_header *)(iobase + 4096);
-+	header = (struct nvram_header *)(flash_start + 4096);
- 	if (header->magic == NVRAM_MAGIC) {
- 		size = NVRAM_SPACE;
- 		goto found;
- 	}
- 
--	header = (struct nvram_header *)(iobase + 1024);
-+	header = (struct nvram_header *)(flash_start + 1024);
- 	if (header->magic == NVRAM_MAGIC) {
- 		size = NVRAM_SPACE;
- 		goto found;
-@@ -124,7 +126,7 @@ int bcm47xx_nvram_init_from_mem(u32 base
- 	if (!iobase)
- 		return -ENOMEM;
- 
--	err = nvram_find_and_copy(iobase, lim);
-+	err = bcm47xx_nvram_find_and_copy(iobase, lim);
- 
- 	iounmap(iobase);
- 
diff --git a/target/linux/generic/backport-5.10/800-v5.13-0002-firmware-bcm47xx_nvram-add-helper-checking-for-NVRAM.patch b/target/linux/generic/backport-5.10/800-v5.13-0002-firmware-bcm47xx_nvram-add-helper-checking-for-NVRAM.patch
deleted file mode 100644
index 6ab072883d83..000000000000
--- a/target/linux/generic/backport-5.10/800-v5.13-0002-firmware-bcm47xx_nvram-add-helper-checking-for-NVRAM.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 0a24b51a3264a3f942a75025ea5ff6133c8989b0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 8 Mar 2021 10:03:17 +0100
-Subject: [PATCH] firmware: bcm47xx_nvram: add helper checking for NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This avoids duplicating code doing casting and checking for NVRAM magic.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 30 ++++++++++++++---------
- 1 file changed, 18 insertions(+), 12 deletions(-)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -34,14 +34,20 @@ static char nvram_buf[NVRAM_SPACE];
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
- 
-+/**
-+ * bcm47xx_nvram_is_valid - check for a valid NVRAM at specified memory
-+ */
-+static bool bcm47xx_nvram_is_valid(void __iomem *nvram)
-+{
-+	return ((struct nvram_header *)nvram)->magic == NVRAM_MAGIC;
-+}
-+
- static u32 find_nvram_size(void __iomem *end)
- {
--	struct nvram_header __iomem *header;
- 	int i;
- 
- 	for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
--		header = (struct nvram_header *)(end - nvram_sizes[i]);
--		if (header->magic == NVRAM_MAGIC)
-+		if (bcm47xx_nvram_is_valid(end - nvram_sizes[i]))
- 			return nvram_sizes[i];
- 	}
- 
-@@ -55,6 +61,7 @@ static int bcm47xx_nvram_find_and_copy(v
- {
- 	struct nvram_header __iomem *header;
- 	size_t flash_size;
-+	size_t offset;
- 	u32 size;
- 
- 	if (nvram_len) {
-@@ -68,31 +75,30 @@ static int bcm47xx_nvram_find_and_copy(v
- 		/* Windowed flash access */
- 		size = find_nvram_size(flash_start + flash_size);
- 		if (size) {
--			header = (struct nvram_header *)(flash_start + flash_size - size);
-+			offset = flash_size - size;
- 			goto found;
- 		}
- 		flash_size <<= 1;
- 	}
- 
- 	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
--	header = (struct nvram_header *)(flash_start + 4096);
--	if (header->magic == NVRAM_MAGIC) {
--		size = NVRAM_SPACE;
-+
-+	offset = 4096;
-+	if (bcm47xx_nvram_is_valid(flash_start + offset))
- 		goto found;
--	}
- 
--	header = (struct nvram_header *)(flash_start + 1024);
--	if (header->magic == NVRAM_MAGIC) {
--		size = NVRAM_SPACE;
-+	offset = 1024;
-+	if (bcm47xx_nvram_is_valid(flash_start + offset))
- 		goto found;
--	}
- 
- 	pr_err("no nvram found\n");
- 	return -ENXIO;
- 
- found:
-+	header = (struct nvram_header *)(flash_start + offset);
- 	__ioread32_copy(nvram_buf, header, sizeof(*header) / 4);
- 	nvram_len = ((struct nvram_header *)(nvram_buf))->len;
-+	size = res_size - offset;
- 	if (nvram_len > size) {
- 		pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n");
- 		nvram_len = size;
diff --git a/target/linux/generic/backport-5.10/800-v5.13-0003-firmware-bcm47xx_nvram-extract-code-copying-NVRAM.patch b/target/linux/generic/backport-5.10/800-v5.13-0003-firmware-bcm47xx_nvram-extract-code-copying-NVRAM.patch
deleted file mode 100644
index a1351f119741..000000000000
--- a/target/linux/generic/backport-5.10/800-v5.13-0003-firmware-bcm47xx_nvram-extract-code-copying-NVRAM.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 298923cf999cecd2ef06df126f85a3d68da8c4d8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 8 Mar 2021 10:03:18 +0100
-Subject: [PATCH] firmware: bcm47xx_nvram: extract code copying NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This simplifies function finding NVRAM. It doesn't directly deal with
-NVRAM structure anymore and is a bit smaller.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 43 +++++++++++++----------
- 1 file changed, 25 insertions(+), 18 deletions(-)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -55,11 +55,34 @@ static u32 find_nvram_size(void __iomem
- }
- 
- /**
-+ * bcm47xx_nvram_copy - copy NVRAM to internal buffer
-+ */
-+static void bcm47xx_nvram_copy(void __iomem *nvram_start, size_t res_size)
-+{
-+	struct nvram_header __iomem *header = nvram_start;
-+	size_t copy_size;
-+
-+	copy_size = header->len;
-+	if (copy_size > res_size) {
-+		pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n");
-+		copy_size = res_size;
-+	}
-+	if (copy_size >= NVRAM_SPACE) {
-+		pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
-+		       copy_size, NVRAM_SPACE - 1);
-+		copy_size = NVRAM_SPACE - 1;
-+	}
-+
-+	__ioread32_copy(nvram_buf, nvram_start, DIV_ROUND_UP(copy_size, 4));
-+	nvram_buf[NVRAM_SPACE - 1] = '\0';
-+	nvram_len = copy_size;
-+}
-+
-+/**
-  * bcm47xx_nvram_find_and_copy - find NVRAM on flash mapping & copy it
-  */
- static int bcm47xx_nvram_find_and_copy(void __iomem *flash_start, size_t res_size)
- {
--	struct nvram_header __iomem *header;
- 	size_t flash_size;
- 	size_t offset;
- 	u32 size;
-@@ -95,23 +118,7 @@ static int bcm47xx_nvram_find_and_copy(v
- 	return -ENXIO;
- 
- found:
--	header = (struct nvram_header *)(flash_start + offset);
--	__ioread32_copy(nvram_buf, header, sizeof(*header) / 4);
--	nvram_len = ((struct nvram_header *)(nvram_buf))->len;
--	size = res_size - offset;
--	if (nvram_len > size) {
--		pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n");
--		nvram_len = size;
--	}
--	if (nvram_len >= NVRAM_SPACE) {
--		pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
--		       nvram_len, NVRAM_SPACE - 1);
--		nvram_len = NVRAM_SPACE - 1;
--	}
--	/* proceed reading data after header */
--	__ioread32_copy(nvram_buf + sizeof(*header), header + 1,
--			DIV_ROUND_UP(nvram_len, 4));
--	nvram_buf[NVRAM_SPACE - 1] = '\0';
-+	bcm47xx_nvram_copy(flash_start + offset, res_size - offset);
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-5.10/800-v5.13-0004-firmware-bcm47xx_nvram-look-for-NVRAM-with-for-inste.patch b/target/linux/generic/backport-5.10/800-v5.13-0004-firmware-bcm47xx_nvram-look-for-NVRAM-with-for-inste.patch
deleted file mode 100644
index 059a13220b14..000000000000
--- a/target/linux/generic/backport-5.10/800-v5.13-0004-firmware-bcm47xx_nvram-look-for-NVRAM-with-for-inste.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 98b68324f67236e8c9152976535dc1f27fb67ba8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 8 Mar 2021 10:03:19 +0100
-Subject: [PATCH] firmware: bcm47xx_nvram: look for NVRAM with for instead of
- while
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This loop requires variable initialization, stop condition and post
-iteration increment. It's pretty much a for loop definition.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -93,15 +93,13 @@ static int bcm47xx_nvram_find_and_copy(v
- 	}
- 
- 	/* TODO: when nvram is on nand flash check for bad blocks first. */
--	flash_size = FLASH_MIN;
--	while (flash_size <= res_size) {
-+	for (flash_size = FLASH_MIN; flash_size <= res_size; flash_size <<= 1) {
- 		/* Windowed flash access */
- 		size = find_nvram_size(flash_start + flash_size);
- 		if (size) {
- 			offset = flash_size - size;
- 			goto found;
- 		}
--		flash_size <<= 1;
- 	}
- 
- 	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
diff --git a/target/linux/generic/backport-5.10/800-v5.13-0005-firmware-bcm47xx_nvram-inline-code-checking-NVRAM-si.patch b/target/linux/generic/backport-5.10/800-v5.13-0005-firmware-bcm47xx_nvram-inline-code-checking-NVRAM-si.patch
deleted file mode 100644
index 21d250049e6f..000000000000
--- a/target/linux/generic/backport-5.10/800-v5.13-0005-firmware-bcm47xx_nvram-inline-code-checking-NVRAM-si.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From f52da4ccfec9192e17f5c16260dfdd6d3ea76f65 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 8 Mar 2021 10:03:20 +0100
-Subject: [PATCH] firmware: bcm47xx_nvram: inline code checking NVRAM size
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Separated function was not improving code quality much (or at all).
-Moreover it expected possible flash end address as argument and it was
-returning NVRAM size.
-
-The new code always operates on offsets which means less logic and less
-calculations.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 25 +++++++----------------
- 1 file changed, 7 insertions(+), 18 deletions(-)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -42,18 +42,6 @@ static bool bcm47xx_nvram_is_valid(void
- 	return ((struct nvram_header *)nvram)->magic == NVRAM_MAGIC;
- }
- 
--static u32 find_nvram_size(void __iomem *end)
--{
--	int i;
--
--	for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
--		if (bcm47xx_nvram_is_valid(end - nvram_sizes[i]))
--			return nvram_sizes[i];
--	}
--
--	return 0;
--}
--
- /**
-  * bcm47xx_nvram_copy - copy NVRAM to internal buffer
-  */
-@@ -85,7 +73,7 @@ static int bcm47xx_nvram_find_and_copy(v
- {
- 	size_t flash_size;
- 	size_t offset;
--	u32 size;
-+	int i;
- 
- 	if (nvram_len) {
- 		pr_warn("nvram already initialized\n");
-@@ -93,12 +81,13 @@ static int bcm47xx_nvram_find_and_copy(v
- 	}
- 
- 	/* TODO: when nvram is on nand flash check for bad blocks first. */
-+
-+	/* Try every possible flash size and check for NVRAM at its end */
- 	for (flash_size = FLASH_MIN; flash_size <= res_size; flash_size <<= 1) {
--		/* Windowed flash access */
--		size = find_nvram_size(flash_start + flash_size);
--		if (size) {
--			offset = flash_size - size;
--			goto found;
-+		for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
-+			offset = flash_size - nvram_sizes[i];
-+			if (bcm47xx_nvram_is_valid(flash_start + offset))
-+				goto found;
- 		}
- 	}
- 
diff --git a/target/linux/generic/backport-5.10/801-v5.11-0001-nvmem-core-Add-support-for-keepout-regions.patch b/target/linux/generic/backport-5.10/801-v5.11-0001-nvmem-core-Add-support-for-keepout-regions.patch
deleted file mode 100644
index a0f8c4715e4d..000000000000
--- a/target/linux/generic/backport-5.10/801-v5.11-0001-nvmem-core-Add-support-for-keepout-regions.patch
+++ /dev/null
@@ -1,267 +0,0 @@
-From fd3bb8f54a88107570334c156efb0c724a261003 Mon Sep 17 00:00:00 2001
-From: Evan Green <evgreen@chromium.org>
-Date: Fri, 27 Nov 2020 10:28:34 +0000
-Subject: [PATCH] nvmem: core: Add support for keepout regions
-
-Introduce support into the nvmem core for arrays of register ranges
-that should not result in actual device access. For these regions a
-constant byte (repeated) is returned instead on read, and writes are
-quietly ignored and returned as successful.
-
-This is useful for instance if certain efuse regions are protected
-from access by Linux because they contain secret info to another part
-of the system (like an integrated modem).
-
-Signed-off-by: Evan Green <evgreen@chromium.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20201127102837.19366-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 153 ++++++++++++++++++++++++++++++++-
- include/linux/nvmem-provider.h |  17 ++++
- 2 files changed, 166 insertions(+), 4 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -34,6 +34,8 @@ struct nvmem_device {
- 	struct bin_attribute	eeprom;
- 	struct device		*base_dev;
- 	struct list_head	cells;
-+	const struct nvmem_keepout *keepout;
-+	unsigned int		nkeepout;
- 	nvmem_reg_read_t	reg_read;
- 	nvmem_reg_write_t	reg_write;
- 	struct gpio_desc	*wp_gpio;
-@@ -66,8 +68,8 @@ static LIST_HEAD(nvmem_lookup_list);
- 
- static BLOCKING_NOTIFIER_HEAD(nvmem_notifier);
- 
--static int nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
--			  void *val, size_t bytes)
-+static int __nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
-+			    void *val, size_t bytes)
- {
- 	if (nvmem->reg_read)
- 		return nvmem->reg_read(nvmem->priv, offset, val, bytes);
-@@ -75,8 +77,8 @@ static int nvmem_reg_read(struct nvmem_d
- 	return -EINVAL;
- }
- 
--static int nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
--			   void *val, size_t bytes)
-+static int __nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
-+			     void *val, size_t bytes)
- {
- 	int ret;
- 
-@@ -90,6 +92,88 @@ static int nvmem_reg_write(struct nvmem_
- 	return -EINVAL;
- }
- 
-+static int nvmem_access_with_keepouts(struct nvmem_device *nvmem,
-+				      unsigned int offset, void *val,
-+				      size_t bytes, int write)
-+{
-+
-+	unsigned int end = offset + bytes;
-+	unsigned int kend, ksize;
-+	const struct nvmem_keepout *keepout = nvmem->keepout;
-+	const struct nvmem_keepout *keepoutend = keepout + nvmem->nkeepout;
-+	int rc;
-+
-+	/*
-+	 * Skip all keepouts before the range being accessed.
-+	 * Keepouts are sorted.
-+	 */
-+	while ((keepout < keepoutend) && (keepout->end <= offset))
-+		keepout++;
-+
-+	while ((offset < end) && (keepout < keepoutend)) {
-+		/* Access the valid portion before the keepout. */
-+		if (offset < keepout->start) {
-+			kend = min(end, keepout->start);
-+			ksize = kend - offset;
-+			if (write)
-+				rc = __nvmem_reg_write(nvmem, offset, val, ksize);
-+			else
-+				rc = __nvmem_reg_read(nvmem, offset, val, ksize);
-+
-+			if (rc)
-+				return rc;
-+
-+			offset += ksize;
-+			val += ksize;
-+		}
-+
-+		/*
-+		 * Now we're aligned to the start of this keepout zone. Go
-+		 * through it.
-+		 */
-+		kend = min(end, keepout->end);
-+		ksize = kend - offset;
-+		if (!write)
-+			memset(val, keepout->value, ksize);
-+
-+		val += ksize;
-+		offset += ksize;
-+		keepout++;
-+	}
-+
-+	/*
-+	 * If we ran out of keepouts but there's still stuff to do, send it
-+	 * down directly
-+	 */
-+	if (offset < end) {
-+		ksize = end - offset;
-+		if (write)
-+			return __nvmem_reg_write(nvmem, offset, val, ksize);
-+		else
-+			return __nvmem_reg_read(nvmem, offset, val, ksize);
-+	}
-+
-+	return 0;
-+}
-+
-+static int nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
-+			  void *val, size_t bytes)
-+{
-+	if (!nvmem->nkeepout)
-+		return __nvmem_reg_read(nvmem, offset, val, bytes);
-+
-+	return nvmem_access_with_keepouts(nvmem, offset, val, bytes, false);
-+}
-+
-+static int nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
-+			   void *val, size_t bytes)
-+{
-+	if (!nvmem->nkeepout)
-+		return __nvmem_reg_write(nvmem, offset, val, bytes);
-+
-+	return nvmem_access_with_keepouts(nvmem, offset, val, bytes, true);
-+}
-+
- #ifdef CONFIG_NVMEM_SYSFS
- static const char * const nvmem_type_str[] = {
- 	[NVMEM_TYPE_UNKNOWN] = "Unknown",
-@@ -535,6 +619,59 @@ nvmem_find_cell_by_name(struct nvmem_dev
- 	return cell;
- }
- 
-+static int nvmem_validate_keepouts(struct nvmem_device *nvmem)
-+{
-+	unsigned int cur = 0;
-+	const struct nvmem_keepout *keepout = nvmem->keepout;
-+	const struct nvmem_keepout *keepoutend = keepout + nvmem->nkeepout;
-+
-+	while (keepout < keepoutend) {
-+		/* Ensure keepouts are sorted and don't overlap. */
-+		if (keepout->start < cur) {
-+			dev_err(&nvmem->dev,
-+				"Keepout regions aren't sorted or overlap.\n");
-+
-+			return -ERANGE;
-+		}
-+
-+		if (keepout->end < keepout->start) {
-+			dev_err(&nvmem->dev,
-+				"Invalid keepout region.\n");
-+
-+			return -EINVAL;
-+		}
-+
-+		/*
-+		 * Validate keepouts (and holes between) don't violate
-+		 * word_size constraints.
-+		 */
-+		if ((keepout->end - keepout->start < nvmem->word_size) ||
-+		    ((keepout->start != cur) &&
-+		     (keepout->start - cur < nvmem->word_size))) {
-+
-+			dev_err(&nvmem->dev,
-+				"Keepout regions violate word_size constraints.\n");
-+
-+			return -ERANGE;
-+		}
-+
-+		/* Validate keepouts don't violate stride (alignment). */
-+		if (!IS_ALIGNED(keepout->start, nvmem->stride) ||
-+		    !IS_ALIGNED(keepout->end, nvmem->stride)) {
-+
-+			dev_err(&nvmem->dev,
-+				"Keepout regions violate stride.\n");
-+
-+			return -EINVAL;
-+		}
-+
-+		cur = keepout->end;
-+		keepout++;
-+	}
-+
-+	return 0;
-+}
-+
- static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
- {
- 	struct device_node *parent, *child;
-@@ -656,6 +793,8 @@ struct nvmem_device *nvmem_register(cons
- 	nvmem->type = config->type;
- 	nvmem->reg_read = config->reg_read;
- 	nvmem->reg_write = config->reg_write;
-+	nvmem->keepout = config->keepout;
-+	nvmem->nkeepout = config->nkeepout;
- 	if (!config->no_of_node)
- 		nvmem->dev.of_node = config->dev->of_node;
- 
-@@ -703,6 +842,12 @@ struct nvmem_device *nvmem_register(cons
- 	if (rval)
- 		goto err_remove_cells;
- 
-+	if (nvmem->nkeepout) {
-+		rval = nvmem_validate_keepouts(nvmem);
-+		if (rval)
-+			goto err_put_device;
-+	}
-+
- 	dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
- 
- 	rval = device_add(&nvmem->dev);
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -31,6 +31,19 @@ enum nvmem_type {
- #define NVMEM_DEVID_AUTO	(-2)
- 
- /**
-+ * struct nvmem_keepout - NVMEM register keepout range.
-+ *
-+ * @start:	The first byte offset to avoid.
-+ * @end:	One beyond the last byte offset to avoid.
-+ * @value:	The byte to fill reads with for this region.
-+ */
-+struct nvmem_keepout {
-+	unsigned int start;
-+	unsigned int end;
-+	unsigned char value;
-+};
-+
-+/**
-  * struct nvmem_config - NVMEM device configuration
-  *
-  * @dev:	Parent device.
-@@ -39,6 +52,8 @@ enum nvmem_type {
-  * @owner:	Pointer to exporter module. Used for refcounting.
-  * @cells:	Optional array of pre-defined NVMEM cells.
-  * @ncells:	Number of elements in cells.
-+ * @keepout:	Optional array of keepout ranges (sorted ascending by start).
-+ * @nkeepout:	Number of elements in the keepout array.
-  * @type:	Type of the nvmem storage
-  * @read_only:	Device is read-only.
-  * @root_only:	Device is accessibly to root only.
-@@ -65,6 +80,8 @@ struct nvmem_config {
- 	struct module		*owner;
- 	const struct nvmem_cell_info	*cells;
- 	int			ncells;
-+	const struct nvmem_keepout *keepout;
-+	unsigned int		nkeepout;
- 	enum nvmem_type		type;
- 	bool			read_only;
- 	bool			root_only;
diff --git a/target/linux/generic/backport-5.10/801-v5.11-0002-nvmem-qfprom-Don-t-touch-certain-fuses.patch b/target/linux/generic/backport-5.10/801-v5.11-0002-nvmem-qfprom-Don-t-touch-certain-fuses.patch
deleted file mode 100644
index ae499e74989b..000000000000
--- a/target/linux/generic/backport-5.10/801-v5.11-0002-nvmem-qfprom-Don-t-touch-certain-fuses.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 044ee8f85267599a9b0112911f5c16d4548b4289 Mon Sep 17 00:00:00 2001
-From: Evan Green <evgreen@chromium.org>
-Date: Fri, 27 Nov 2020 10:28:36 +0000
-Subject: [PATCH] nvmem: qfprom: Don't touch certain fuses
-
-Some fuse ranges are protected by the XPU such that the AP cannot
-access them. Attempting to do so causes an SError. Use the newly
-introduced per-soc compatible string, and the newly introduced
-nvmem keepout support to attach the set of regions
-we should not access.
-
-Reviewed-by: Douglas Anderson <dianders@chromium.org>
-Signed-off-by: Evan Green <evgreen@chromium.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20201127102837.19366-5-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qfprom.c | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/drivers/nvmem/qfprom.c
-+++ b/drivers/nvmem/qfprom.c
-@@ -12,6 +12,7 @@
- #include <linux/mod_devicetable.h>
- #include <linux/nvmem-provider.h>
- #include <linux/platform_device.h>
-+#include <linux/property.h>
- #include <linux/regulator/consumer.h>
- 
- /* Blow timer clock frequency in Mhz */
-@@ -89,6 +90,28 @@ struct qfprom_touched_values {
- };
- 
- /**
-+ * struct qfprom_soc_compatible_data - Data matched against the SoC
-+ * compatible string.
-+ *
-+ * @keepout: Array of keepout regions for this SoC.
-+ * @nkeepout: Number of elements in the keepout array.
-+ */
-+struct qfprom_soc_compatible_data {
-+	const struct nvmem_keepout *keepout;
-+	unsigned int nkeepout;
-+};
-+
-+static const struct nvmem_keepout sc7180_qfprom_keepout[] = {
-+	{.start = 0x128, .end = 0x148},
-+	{.start = 0x220, .end = 0x228}
-+};
-+
-+static const struct qfprom_soc_compatible_data sc7180_qfprom = {
-+	.keepout = sc7180_qfprom_keepout,
-+	.nkeepout = ARRAY_SIZE(sc7180_qfprom_keepout)
-+};
-+
-+/**
-  * qfprom_disable_fuse_blowing() - Undo enabling of fuse blowing.
-  * @priv: Our driver data.
-  * @old:  The data that was stashed from before fuse blowing.
-@@ -302,6 +325,7 @@ static int qfprom_probe(struct platform_
- 	struct device *dev = &pdev->dev;
- 	struct resource *res;
- 	struct nvmem_device *nvmem;
-+	const struct qfprom_soc_compatible_data *soc_data;
- 	struct qfprom_priv *priv;
- 	int ret;
- 
-@@ -320,6 +344,11 @@ static int qfprom_probe(struct platform_
- 	econfig.priv = priv;
- 
- 	priv->dev = dev;
-+	soc_data = device_get_match_data(dev);
-+	if (soc_data) {
-+		econfig.keepout = soc_data->keepout;
-+		econfig.nkeepout = soc_data->nkeepout;
-+	}
- 
- 	/*
- 	 * If more than one region is provided then the OS has the ability
-@@ -375,6 +404,7 @@ static int qfprom_probe(struct platform_
- 
- static const struct of_device_id qfprom_of_match[] = {
- 	{ .compatible = "qcom,qfprom",},
-+	{ .compatible = "qcom,sc7180-qfprom", .data = &sc7180_qfprom},
- 	{/* sentinel */},
- };
- MODULE_DEVICE_TABLE(of, qfprom_of_match);
diff --git a/target/linux/generic/backport-5.10/801-v5.11-0003-nvmem-imx-ocotp-add-support-for-the-unaliged-word-co.patch b/target/linux/generic/backport-5.10/801-v5.11-0003-nvmem-imx-ocotp-add-support-for-the-unaliged-word-co.patch
deleted file mode 100644
index 0a05e0a97f51..000000000000
--- a/target/linux/generic/backport-5.10/801-v5.11-0003-nvmem-imx-ocotp-add-support-for-the-unaliged-word-co.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From 3311bf18467272388039922a5e29c4925b291f73 Mon Sep 17 00:00:00 2001
-From: Peng Fan <peng.fan@nxp.com>
-Date: Fri, 27 Nov 2020 10:28:37 +0000
-Subject: [PATCH] nvmem: imx-ocotp: add support for the unaliged word count
-
-When offset is not 4 bytes aligned, directly shift righty by 2 bits
-will cause reading out wrong data. Since imx ocotp only supports
-4 bytes reading once, we need handle offset is not 4 bytes aligned
-and enlarge the bytes to 4 bytes aligned. After reading finished,
-copy the needed data from buffer to caller and free buffer.
-
-Signed-off-by: Peng Fan <peng.fan@nxp.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20201127102837.19366-6-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/imx-ocotp.c | 30 ++++++++++++++++++++++++------
- 1 file changed, 24 insertions(+), 6 deletions(-)
-
---- a/drivers/nvmem/imx-ocotp.c
-+++ b/drivers/nvmem/imx-ocotp.c
-@@ -4,6 +4,8 @@
-  *
-  * Copyright (c) 2015 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
-  *
-+ * Copyright 2019 NXP
-+ *
-  * Based on the barebox ocotp driver,
-  * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>,
-  *	Orex Computed Radiography
-@@ -158,22 +160,30 @@ static int imx_ocotp_read(void *context,
- {
- 	struct ocotp_priv *priv = context;
- 	unsigned int count;
--	u32 *buf = val;
-+	u8 *buf, *p;
- 	int i, ret;
--	u32 index;
-+	u32 index, num_bytes;
- 
- 	index = offset >> 2;
--	count = bytes >> 2;
-+	num_bytes = round_up((offset % 4) + bytes, 4);
-+	count = num_bytes >> 2;
- 
- 	if (count > (priv->params->nregs - index))
- 		count = priv->params->nregs - index;
- 
-+	p = kzalloc(num_bytes, GFP_KERNEL);
-+	if (!p)
-+		return -ENOMEM;
-+
- 	mutex_lock(&ocotp_mutex);
- 
-+	buf = p;
-+
- 	ret = clk_prepare_enable(priv->clk);
- 	if (ret < 0) {
- 		mutex_unlock(&ocotp_mutex);
- 		dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
-+		kfree(p);
- 		return ret;
- 	}
- 
-@@ -184,7 +194,7 @@ static int imx_ocotp_read(void *context,
- 	}
- 
- 	for (i = index; i < (index + count); i++) {
--		*buf++ = readl(priv->base + IMX_OCOTP_OFFSET_B0W0 +
-+		*(u32 *)buf = readl(priv->base + IMX_OCOTP_OFFSET_B0W0 +
- 			       i * IMX_OCOTP_OFFSET_PER_WORD);
- 
- 		/* 47.3.1.2
-@@ -193,13 +203,21 @@ static int imx_ocotp_read(void *context,
- 		 * software before any new write, read or reload access can be
- 		 * issued
- 		 */
--		if (*(buf - 1) == IMX_OCOTP_READ_LOCKED_VAL)
-+		if (*((u32 *)buf) == IMX_OCOTP_READ_LOCKED_VAL)
- 			imx_ocotp_clr_err_if_set(priv);
-+
-+		buf += 4;
- 	}
- 
-+	index = offset % 4;
-+	memcpy(val, &p[index], bytes);
-+
- read_end:
- 	clk_disable_unprepare(priv->clk);
- 	mutex_unlock(&ocotp_mutex);
-+
-+	kfree(p);
-+
- 	return ret;
- }
- 
-@@ -447,7 +465,7 @@ static struct nvmem_config imx_ocotp_nvm
- 	.name = "imx-ocotp",
- 	.read_only = false,
- 	.word_size = 4,
--	.stride = 4,
-+	.stride = 1,
- 	.reg_read = imx_ocotp_read,
- 	.reg_write = imx_ocotp_write,
- };
diff --git a/target/linux/generic/backport-5.10/802-v5.12-0002-nvmem-imx-iim-Use-of_device_get_match_data.patch b/target/linux/generic/backport-5.10/802-v5.12-0002-nvmem-imx-iim-Use-of_device_get_match_data.patch
deleted file mode 100644
index 9a7ba7f565c5..000000000000
--- a/target/linux/generic/backport-5.10/802-v5.12-0002-nvmem-imx-iim-Use-of_device_get_match_data.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 579db09c6106977c0496f2cca48606b289df4bdf Mon Sep 17 00:00:00 2001
-From: Fabio Estevam <festevam@gmail.com>
-Date: Fri, 29 Jan 2021 17:14:27 +0000
-Subject: [PATCH] nvmem: imx-iim: Use of_device_get_match_data()
-
-The retrieval of driver data via of_device_get_match_data() can make
-the code simpler.
-
-Use of_device_get_match_data() to simplify the code.
-
-Signed-off-by: Fabio Estevam <festevam@gmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210129171430.11328-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/imx-iim.c | 7 +------
- 1 file changed, 1 insertion(+), 6 deletions(-)
-
---- a/drivers/nvmem/imx-iim.c
-+++ b/drivers/nvmem/imx-iim.c
-@@ -96,7 +96,6 @@ MODULE_DEVICE_TABLE(of, imx_iim_dt_ids);
- 
- static int imx_iim_probe(struct platform_device *pdev)
- {
--	const struct of_device_id *of_id;
- 	struct device *dev = &pdev->dev;
- 	struct iim_priv *iim;
- 	struct nvmem_device *nvmem;
-@@ -111,11 +110,7 @@ static int imx_iim_probe(struct platform
- 	if (IS_ERR(iim->base))
- 		return PTR_ERR(iim->base);
- 
--	of_id = of_match_device(imx_iim_dt_ids, dev);
--	if (!of_id)
--		return -ENODEV;
--
--	drvdata = of_id->data;
-+	drvdata = of_device_get_match_data(&pdev->dev);
- 
- 	iim->clk = devm_clk_get(dev, NULL);
- 	if (IS_ERR(iim->clk))
diff --git a/target/linux/generic/backport-5.10/802-v5.12-0003-nvmem-Add-driver-to-expose-reserved-memory-as-nvmem.patch b/target/linux/generic/backport-5.10/802-v5.12-0003-nvmem-Add-driver-to-expose-reserved-memory-as-nvmem.patch
deleted file mode 100644
index f3ed563d2016..000000000000
--- a/target/linux/generic/backport-5.10/802-v5.12-0003-nvmem-Add-driver-to-expose-reserved-memory-as-nvmem.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From 5a3fa75a4d9cb6bcfc9081ef224a4cdcd4b3eafe Mon Sep 17 00:00:00 2001
-From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Date: Fri, 29 Jan 2021 17:14:29 +0000
-Subject: [PATCH] nvmem: Add driver to expose reserved memory as nvmem
-
-Firmware/co-processors might use reserved memory areas in order to pass
-data stemming from an nvmem device otherwise non accessible to Linux.
-For example an EEPROM memory only physically accessible to firmware, or
-data only accessible early at boot time.
-
-In order to expose this data to other drivers and user-space, the driver
-models the reserved memory area as an nvmem device.
-
-Tested-by: Tim Gover <tim.gover@raspberrypi.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210129171430.11328-5-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig  |  8 ++++
- drivers/nvmem/Makefile |  2 +
- drivers/nvmem/rmem.c   | 97 ++++++++++++++++++++++++++++++++++++++++++
- drivers/of/platform.c  |  1 +
- 4 files changed, 108 insertions(+)
- create mode 100644 drivers/nvmem/rmem.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -270,4 +270,12 @@ config SPRD_EFUSE
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem-sprd-efuse.
- 
-+config NVMEM_RMEM
-+	tristate "Reserved Memory Based Driver Support"
-+	help
-+	  This drivers maps reserved memory into an nvmem device. It might be
-+	  useful to expose information left by firmware in memory.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called nvmem-rmem.
- endif
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -55,3 +55,5 @@ obj-$(CONFIG_NVMEM_ZYNQMP)	+= nvmem_zynq
- nvmem_zynqmp_nvmem-y		:= zynqmp_nvmem.o
- obj-$(CONFIG_SPRD_EFUSE)	+= nvmem_sprd_efuse.o
- nvmem_sprd_efuse-y		:= sprd-efuse.o
-+obj-$(CONFIG_NVMEM_RMEM) 	+= nvmem-rmem.o
-+nvmem-rmem-y			:= rmem.o
---- /dev/null
-+++ b/drivers/nvmem/rmem.c
-@@ -0,0 +1,97 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright (C) 2020 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of_reserved_mem.h>
-+#include <linux/platform_device.h>
-+
-+struct rmem {
-+	struct device *dev;
-+	struct nvmem_device *nvmem;
-+	struct reserved_mem *mem;
-+
-+	phys_addr_t size;
-+};
-+
-+static int rmem_read(void *context, unsigned int offset,
-+		     void *val, size_t bytes)
-+{
-+	struct rmem *priv = context;
-+	size_t available = priv->mem->size;
-+	loff_t off = offset;
-+	void *addr;
-+	int count;
-+
-+	/*
-+	 * Only map the reserved memory at this point to avoid potential rogue
-+	 * kernel threads inadvertently modifying it. Based on the current
-+	 * uses-cases for this driver, the performance hit isn't a concern.
-+	 * Nor is likely to be, given the nature of the subsystem. Most nvmem
-+	 * devices operate over slow buses to begin with.
-+	 *
-+	 * An alternative would be setting the memory as RO, set_memory_ro(),
-+	 * but as of Dec 2020 this isn't possible on arm64.
-+	 */
-+	addr = memremap(priv->mem->base, available, MEMREMAP_WB);
-+	if (IS_ERR(addr)) {
-+		dev_err(priv->dev, "Failed to remap memory region\n");
-+		return PTR_ERR(addr);
-+	}
-+
-+	count = memory_read_from_buffer(val, bytes, &off, addr, available);
-+
-+	memunmap(addr);
-+
-+	return count;
-+}
-+
-+static int rmem_probe(struct platform_device *pdev)
-+{
-+	struct nvmem_config config = { };
-+	struct device *dev = &pdev->dev;
-+	struct reserved_mem *mem;
-+	struct rmem *priv;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+	priv->dev = dev;
-+
-+	mem = of_reserved_mem_lookup(dev->of_node);
-+	if (!mem) {
-+		dev_err(dev, "Failed to lookup reserved memory\n");
-+		return -EINVAL;
-+	}
-+	priv->mem = mem;
-+
-+	config.dev = dev;
-+	config.priv = priv;
-+	config.name = "rmem";
-+	config.size = mem->size;
-+	config.reg_read = rmem_read;
-+
-+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
-+}
-+
-+static const struct of_device_id rmem_match[] = {
-+	{ .compatible = "nvmem-rmem", },
-+	{ /* sentinel */ },
-+};
-+MODULE_DEVICE_TABLE(of, rmem_match);
-+
-+static struct platform_driver rmem_driver = {
-+	.probe = rmem_probe,
-+	.driver = {
-+		.name = "rmem",
-+		.of_match_table = rmem_match,
-+	},
-+};
-+module_platform_driver(rmem_driver);
-+
-+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
-+MODULE_DESCRIPTION("Reserved Memory Based nvmem Driver");
-+MODULE_LICENSE("GPL");
---- a/drivers/of/platform.c
-+++ b/drivers/of/platform.c
-@@ -511,6 +511,7 @@ static const struct of_device_id reserve
- 	{ .compatible = "qcom,rmtfs-mem" },
- 	{ .compatible = "qcom,cmd-db" },
- 	{ .compatible = "ramoops" },
-+	{ .compatible = "nvmem-rmem" },
- 	{}
- };
- 
diff --git a/target/linux/generic/backport-5.10/802-v5.12-0005-nvmem-Kconfig-Correct-typo-in-NVMEM_RMEM.patch b/target/linux/generic/backport-5.10/802-v5.12-0005-nvmem-Kconfig-Correct-typo-in-NVMEM_RMEM.patch
deleted file mode 100644
index 129d070a62bf..000000000000
--- a/target/linux/generic/backport-5.10/802-v5.12-0005-nvmem-Kconfig-Correct-typo-in-NVMEM_RMEM.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From b31f1eb41c140d7979f855df73064b3a3ae8055a Mon Sep 17 00:00:00 2001
-From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Date: Fri, 5 Feb 2021 10:08:52 +0000
-Subject: [PATCH] nvmem: Kconfig: Correct typo in NVMEM_RMEM
-
-s/drivers/driver/ as the configuration selects a single driver.
-
-Suggested-by: Randy Dunlap <rdunlap@infradead.org>
-Acked-by: Randy Dunlap <rdunlap@infradead.org>
-Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210205100853.32372-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -273,7 +273,7 @@ config SPRD_EFUSE
- config NVMEM_RMEM
- 	tristate "Reserved Memory Based Driver Support"
- 	help
--	  This drivers maps reserved memory into an nvmem device. It might be
-+	  This driver maps reserved memory into an nvmem device. It might be
- 	  useful to expose information left by firmware in memory.
- 
- 	  This driver can also be built as a module. If so, the module
diff --git a/target/linux/generic/backport-5.10/803-v5.13-0001-nvmem-convert-comma-to-semicolon.patch b/target/linux/generic/backport-5.10/803-v5.13-0001-nvmem-convert-comma-to-semicolon.patch
deleted file mode 100644
index b611ffe645a7..000000000000
--- a/target/linux/generic/backport-5.10/803-v5.13-0001-nvmem-convert-comma-to-semicolon.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From e050f160d4832ce5227fb6ca934969cec0fc48be Mon Sep 17 00:00:00 2001
-From: Zheng Yongjun <zhengyongjun3@huawei.com>
-Date: Tue, 30 Mar 2021 12:12:33 +0100
-Subject: [PATCH] nvmem: convert comma to semicolon
-
-Replace a comma between expression statements by a semicolon.
-
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210330111241.19401-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qcom-spmi-sdam.c | 2 +-
- drivers/nvmem/snvs_lpgpr.c     | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/nvmem/qcom-spmi-sdam.c
-+++ b/drivers/nvmem/qcom-spmi-sdam.c
-@@ -141,7 +141,7 @@ static int sdam_probe(struct platform_de
- 	sdam->sdam_config.dev = &pdev->dev;
- 	sdam->sdam_config.name = "spmi_sdam";
- 	sdam->sdam_config.id = NVMEM_DEVID_AUTO;
--	sdam->sdam_config.owner = THIS_MODULE,
-+	sdam->sdam_config.owner = THIS_MODULE;
- 	sdam->sdam_config.stride = 1;
- 	sdam->sdam_config.word_size = 1;
- 	sdam->sdam_config.reg_read = sdam_read;
---- a/drivers/nvmem/snvs_lpgpr.c
-+++ b/drivers/nvmem/snvs_lpgpr.c
-@@ -123,7 +123,7 @@ static int snvs_lpgpr_probe(struct platf
- 	cfg->dev = dev;
- 	cfg->stride = 4;
- 	cfg->word_size = 4;
--	cfg->size = dcfg->size,
-+	cfg->size = dcfg->size;
- 	cfg->owner = THIS_MODULE;
- 	cfg->reg_read  = snvs_lpgpr_read;
- 	cfg->reg_write = snvs_lpgpr_write;
diff --git a/target/linux/generic/backport-5.10/803-v5.13-0003-nvmem-brcm_nvram-new-driver-exposing-Broadcom-s-NVRA.patch b/target/linux/generic/backport-5.10/803-v5.13-0003-nvmem-brcm_nvram-new-driver-exposing-Broadcom-s-NVRA.patch
deleted file mode 100644
index 17be01c14f1a..000000000000
--- a/target/linux/generic/backport-5.10/803-v5.13-0003-nvmem-brcm_nvram-new-driver-exposing-Broadcom-s-NVRA.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From 3fef9ed0627af30753a2404b8bd59d92cdb4c0ce Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 30 Mar 2021 12:12:36 +0100
-Subject: [PATCH] nvmem: brcm_nvram: new driver exposing Broadcom's NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This driver provides access to Broadcom's NVRAM.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210330111241.19401-6-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig      |  9 +++++
- drivers/nvmem/Makefile     |  2 +
- drivers/nvmem/brcm_nvram.c | 78 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 89 insertions(+)
- create mode 100644 drivers/nvmem/brcm_nvram.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -278,4 +278,13 @@ config NVMEM_RMEM
- 
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem-rmem.
-+
-+config NVMEM_BRCM_NVRAM
-+	tristate "Broadcom's NVRAM support"
-+	depends on ARCH_BCM_5301X || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	help
-+	  This driver provides support for Broadcom's NVRAM that can be accessed
-+	  using I/O mapping.
-+
- endif
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -57,3 +57,5 @@ obj-$(CONFIG_SPRD_EFUSE)	+= nvmem_sprd_e
- nvmem_sprd_efuse-y		:= sprd-efuse.o
- obj-$(CONFIG_NVMEM_RMEM) 	+= nvmem-rmem.o
- nvmem-rmem-y			:= rmem.o
-+obj-$(CONFIG_NVMEM_BRCM_NVRAM)	+= nvmem_brcm_nvram.o
-+nvmem_brcm_nvram-y		:= brcm_nvram.o
---- /dev/null
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -0,0 +1,78 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/platform_device.h>
-+
-+struct brcm_nvram {
-+	struct device *dev;
-+	void __iomem *base;
-+};
-+
-+static int brcm_nvram_read(void *context, unsigned int offset, void *val,
-+			   size_t bytes)
-+{
-+	struct brcm_nvram *priv = context;
-+	u8 *dst = val;
-+
-+	while (bytes--)
-+		*dst++ = readb(priv->base + offset++);
-+
-+	return 0;
-+}
-+
-+static int brcm_nvram_probe(struct platform_device *pdev)
-+{
-+	struct nvmem_config config = {
-+		.name = "brcm-nvram",
-+		.reg_read = brcm_nvram_read,
-+	};
-+	struct device *dev = &pdev->dev;
-+	struct resource *res;
-+	struct brcm_nvram *priv;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+	priv->dev = dev;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	priv->base = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(priv->base))
-+		return PTR_ERR(priv->base);
-+
-+	config.dev = dev;
-+	config.priv = priv;
-+	config.size = resource_size(res);
-+
-+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
-+}
-+
-+static const struct of_device_id brcm_nvram_of_match_table[] = {
-+	{ .compatible = "brcm,nvram", },
-+	{},
-+};
-+
-+static struct platform_driver brcm_nvram_driver = {
-+	.probe = brcm_nvram_probe,
-+	.driver = {
-+		.name = "brcm_nvram",
-+		.of_match_table = brcm_nvram_of_match_table,
-+	},
-+};
-+
-+static int __init brcm_nvram_init(void)
-+{
-+	return platform_driver_register(&brcm_nvram_driver);
-+}
-+
-+subsys_initcall_sync(brcm_nvram_init);
-+
-+MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_LICENSE("GPL");
-+MODULE_DEVICE_TABLE(of, brcm_nvram_of_match_table);
diff --git a/target/linux/generic/backport-5.10/803-v5.13-0004-nvmem-core-Add-functions-to-make-number-reading-easy.patch b/target/linux/generic/backport-5.10/803-v5.13-0004-nvmem-core-Add-functions-to-make-number-reading-easy.patch
deleted file mode 100644
index f791aea8ae83..000000000000
--- a/target/linux/generic/backport-5.10/803-v5.13-0004-nvmem-core-Add-functions-to-make-number-reading-easy.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From a28e824fb8270eda43fd0f65c2a5fdf33f55c5eb Mon Sep 17 00:00:00 2001
-From: Douglas Anderson <dianders@chromium.org>
-Date: Tue, 30 Mar 2021 12:12:37 +0100
-Subject: [PATCH] nvmem: core: Add functions to make number reading easy
-
-Sometimes the clients of nvmem just want to get a number out of
-nvmem. They don't want to think about exactly how many bytes the nvmem
-cell took up. They just want the number. Let's make it easy.
-
-In general this concept is useful because nvmem space is precious and
-usually the fewest bits are allocated that will hold a given value on
-a given system. However, even though small numbers might be fine on
-one system that doesn't mean that logically the number couldn't be
-bigger. Imagine nvmem containing a max frequency for a component. On
-one system perhaps that fits in 16 bits. On another system it might
-fit in 32 bits. The code reading this number doesn't care--it just
-wants the number.
-
-We'll provide two functions: nvmem_cell_read_variable_le_u32() and
-nvmem_cell_read_variable_le_u64().
-
-Comparing these to the existing functions like nvmem_cell_read_u32():
-* These new functions have no problems if the value was stored in
-  nvmem in fewer bytes. It's OK to use these function as long as the
-  value stored will fit in 32-bits (or 64-bits).
-* These functions avoid problems that the earlier APIs had with bit
-  offsets. For instance, you can't use nvmem_cell_read_u32() to read a
-  value has nbits=32 and bit_offset=4 because the nvmem cell must be
-  at least 5 bytes big to hold this value. The new API accounts for
-  this and works fine.
-* These functions make it very explicit that they assume that the
-  number was stored in little endian format. The old functions made
-  this assumption whenever bit_offset was non-zero (see
-  nvmem_shift_read_buffer_in_place()) but didn't whenever the
-  bit_offset was zero.
-
-NOTE: it's assumed that we don't need an 8-bit or 16-bit version of
-this function. The 32-bit version of the function can be used to read
-8-bit or 16-bit data.
-
-At the moment, I'm only adding the "unsigned" versions of these
-functions, but if it ends up being useful someone could add a "signed"
-version that did 2's complement sign extension.
-
-At the moment, I'm only adding the "little endian" versions of these
-functions. Adding the "big endian" version would require adding "big
-endian" support to nvmem_shift_read_buffer_in_place().
-
-Signed-off-by: Douglas Anderson <dianders@chromium.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210330111241.19401-7-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 95 ++++++++++++++++++++++++++++++++++
- include/linux/nvmem-consumer.h |  4 ++
- 2 files changed, 99 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -1613,6 +1613,101 @@ int nvmem_cell_read_u64(struct device *d
- }
- EXPORT_SYMBOL_GPL(nvmem_cell_read_u64);
- 
-+static void *nvmem_cell_read_variable_common(struct device *dev,
-+					     const char *cell_id,
-+					     size_t max_len, size_t *len)
-+{
-+	struct nvmem_cell *cell;
-+	int nbits;
-+	void *buf;
-+
-+	cell = nvmem_cell_get(dev, cell_id);
-+	if (IS_ERR(cell))
-+		return cell;
-+
-+	nbits = cell->nbits;
-+	buf = nvmem_cell_read(cell, len);
-+	nvmem_cell_put(cell);
-+	if (IS_ERR(buf))
-+		return buf;
-+
-+	/*
-+	 * If nbits is set then nvmem_cell_read() can significantly exaggerate
-+	 * the length of the real data. Throw away the extra junk.
-+	 */
-+	if (nbits)
-+		*len = DIV_ROUND_UP(nbits, 8);
-+
-+	if (*len > max_len) {
-+		kfree(buf);
-+		return ERR_PTR(-ERANGE);
-+	}
-+
-+	return buf;
-+}
-+
-+/**
-+ * nvmem_cell_read_variable_le_u32() - Read up to 32-bits of data as a little endian number.
-+ *
-+ * @dev: Device that requests the nvmem cell.
-+ * @cell_id: Name of nvmem cell to read.
-+ * @val: pointer to output value.
-+ *
-+ * Return: 0 on success or negative errno.
-+ */
-+int nvmem_cell_read_variable_le_u32(struct device *dev, const char *cell_id,
-+				    u32 *val)
-+{
-+	size_t len;
-+	u8 *buf;
-+	int i;
-+
-+	buf = nvmem_cell_read_variable_common(dev, cell_id, sizeof(*val), &len);
-+	if (IS_ERR(buf))
-+		return PTR_ERR(buf);
-+
-+	/* Copy w/ implicit endian conversion */
-+	*val = 0;
-+	for (i = 0; i < len; i++)
-+		*val |= buf[i] << (8 * i);
-+
-+	kfree(buf);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(nvmem_cell_read_variable_le_u32);
-+
-+/**
-+ * nvmem_cell_read_variable_le_u64() - Read up to 64-bits of data as a little endian number.
-+ *
-+ * @dev: Device that requests the nvmem cell.
-+ * @cell_id: Name of nvmem cell to read.
-+ * @val: pointer to output value.
-+ *
-+ * Return: 0 on success or negative errno.
-+ */
-+int nvmem_cell_read_variable_le_u64(struct device *dev, const char *cell_id,
-+				    u64 *val)
-+{
-+	size_t len;
-+	u8 *buf;
-+	int i;
-+
-+	buf = nvmem_cell_read_variable_common(dev, cell_id, sizeof(*val), &len);
-+	if (IS_ERR(buf))
-+		return PTR_ERR(buf);
-+
-+	/* Copy w/ implicit endian conversion */
-+	*val = 0;
-+	for (i = 0; i < len; i++)
-+		*val |= buf[i] << (8 * i);
-+
-+	kfree(buf);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(nvmem_cell_read_variable_le_u64);
-+
- /**
-  * nvmem_device_cell_read() - Read a given nvmem device and cell
-  *
---- a/include/linux/nvmem-consumer.h
-+++ b/include/linux/nvmem-consumer.h
-@@ -65,6 +65,10 @@ int nvmem_cell_read_u8(struct device *de
- int nvmem_cell_read_u16(struct device *dev, const char *cell_id, u16 *val);
- int nvmem_cell_read_u32(struct device *dev, const char *cell_id, u32 *val);
- int nvmem_cell_read_u64(struct device *dev, const char *cell_id, u64 *val);
-+int nvmem_cell_read_variable_le_u32(struct device *dev, const char *cell_id,
-+				    u32 *val);
-+int nvmem_cell_read_variable_le_u64(struct device *dev, const char *cell_id,
-+				    u64 *val);
- 
- /* direct nvmem device read/write interface */
- struct nvmem_device *nvmem_device_get(struct device *dev, const char *name);
diff --git a/target/linux/generic/backport-5.10/803-v5.13-0005-nvmem-core-Fix-unintentional-sign-extension-issue.patch b/target/linux/generic/backport-5.10/803-v5.13-0005-nvmem-core-Fix-unintentional-sign-extension-issue.patch
deleted file mode 100644
index 958dc65073f5..000000000000
--- a/target/linux/generic/backport-5.10/803-v5.13-0005-nvmem-core-Fix-unintentional-sign-extension-issue.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 55022fdeace8e432f008787ce03703bdcc9c3ca9 Mon Sep 17 00:00:00 2001
-From: Colin Ian King <colin.king@canonical.com>
-Date: Tue, 30 Mar 2021 12:12:38 +0100
-Subject: [PATCH] nvmem: core: Fix unintentional sign extension issue
-
-The shifting of the u8 integer buf[3] by 24 bits to the left will
-be promoted to a 32 bit signed int and then sign-extended to a
-u64. In the event that the top bit of buf[3] is set then all
-then all the upper 32 bits of the u64 end up as also being set
-because of the sign-extension. Fix this by casting buf[i] to
-a u64 before the shift.
-
-Fixes: a28e824fb827 ("nvmem: core: Add functions to make number reading easy")
-Reviewed-by: Douglas Anderson <dianders@chromium.org>
-Signed-off-by: Colin Ian King <colin.king@canonical.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Addresses-Coverity: ("Unintended sign extension")
-Link: https://lore.kernel.org/r/20210330111241.19401-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -1700,7 +1700,7 @@ int nvmem_cell_read_variable_le_u64(stru
- 	/* Copy w/ implicit endian conversion */
- 	*val = 0;
- 	for (i = 0; i < len; i++)
--		*val |= buf[i] << (8 * i);
-+		*val |= (uint64_t)buf[i] << (8 * i);
- 
- 	kfree(buf);
- 
diff --git a/target/linux/generic/backport-5.10/803-v5.13-0006-nvmem-rmem-fix-undefined-reference-to-memremap.patch b/target/linux/generic/backport-5.10/803-v5.13-0006-nvmem-rmem-fix-undefined-reference-to-memremap.patch
deleted file mode 100644
index 9e13fb670835..000000000000
--- a/target/linux/generic/backport-5.10/803-v5.13-0006-nvmem-rmem-fix-undefined-reference-to-memremap.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From cc1bc56fdc76a55bb8fae9a145a2e60bf22fb129 Mon Sep 17 00:00:00 2001
-From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Date: Tue, 30 Mar 2021 12:12:39 +0100
-Subject: [PATCH] nvmem: rmem: fix undefined reference to memremap
-
-Fix below error reporte by kernel test robot
-rmem.c:(.text+0x14e): undefined reference to memremap
-s390x-linux-gnu-ld: rmem.c:(.text+0x1b6): undefined reference to memunmap
-
-Fixes: 5a3fa75a4d9c ("nvmem: Add driver to expose reserved memory as nvmem")
-Reported-by: kernel test robot <lkp@intel.com>
-Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210330111241.19401-9-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -272,6 +272,7 @@ config SPRD_EFUSE
- 
- config NVMEM_RMEM
- 	tristate "Reserved Memory Based Driver Support"
-+	depends on HAS_IOMEM
- 	help
- 	  This driver maps reserved memory into an nvmem device. It might be
- 	  useful to expose information left by firmware in memory.
diff --git a/target/linux/generic/backport-5.10/803-v5.13-0007-nvmem-qfprom-Add-support-for-fuse-blowing-on-sc7280.patch b/target/linux/generic/backport-5.10/803-v5.13-0007-nvmem-qfprom-Add-support-for-fuse-blowing-on-sc7280.patch
deleted file mode 100644
index 0e75d4c93d7b..000000000000
--- a/target/linux/generic/backport-5.10/803-v5.13-0007-nvmem-qfprom-Add-support-for-fuse-blowing-on-sc7280.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From 5a1bea2a2572ce5eb4bdcf432a6929681ee381f2 Mon Sep 17 00:00:00 2001
-From: Rajendra Nayak <rnayak@codeaurora.org>
-Date: Tue, 30 Mar 2021 12:12:41 +0100
-Subject: [PATCH] nvmem: qfprom: Add support for fuse blowing on sc7280
-
-Handle the differences across LDO voltage needed for blowing fuses,
-and the blow timer value, identified using a minor version of 15
-on sc7280.
-
-Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
-Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210330111241.19401-11-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qfprom.c | 27 +++++++++++++++++++++++++--
- 1 file changed, 25 insertions(+), 2 deletions(-)
-
---- a/drivers/nvmem/qfprom.c
-+++ b/drivers/nvmem/qfprom.c
-@@ -45,11 +45,13 @@ MODULE_PARM_DESC(read_raw_data, "Read ra
-  * @qfprom_blow_timer_value: The timer value of qfprom when doing efuse blow.
-  * @qfprom_blow_set_freq:    The frequency required to set when we start the
-  *                           fuse blowing.
-+ * @qfprom_blow_uV:          LDO voltage to be set when doing efuse blow
-  */
- struct qfprom_soc_data {
- 	u32 accel_value;
- 	u32 qfprom_blow_timer_value;
- 	u32 qfprom_blow_set_freq;
-+	int qfprom_blow_uV;
- };
- 
- /**
-@@ -111,6 +113,15 @@ static const struct qfprom_soc_compatibl
- 	.nkeepout = ARRAY_SIZE(sc7180_qfprom_keepout)
- };
- 
-+static const struct nvmem_keepout sc7280_qfprom_keepout[] = {
-+	{.start = 0x128, .end = 0x148},
-+	{.start = 0x238, .end = 0x248}
-+};
-+
-+static const struct qfprom_soc_compatible_data sc7280_qfprom = {
-+	.keepout = sc7280_qfprom_keepout,
-+	.nkeepout = ARRAY_SIZE(sc7280_qfprom_keepout)
-+};
- /**
-  * qfprom_disable_fuse_blowing() - Undo enabling of fuse blowing.
-  * @priv: Our driver data.
-@@ -168,6 +179,7 @@ static int qfprom_enable_fuse_blowing(co
- 				      struct qfprom_touched_values *old)
- {
- 	int ret;
-+	int qfprom_blow_uV = priv->soc_data->qfprom_blow_uV;
- 
- 	ret = clk_prepare_enable(priv->secclk);
- 	if (ret) {
-@@ -187,9 +199,9 @@ static int qfprom_enable_fuse_blowing(co
- 	 * a rail shared do don't specify a max--regulator constraints
- 	 * will handle.
- 	 */
--	ret = regulator_set_voltage(priv->vcc, 1800000, INT_MAX);
-+	ret = regulator_set_voltage(priv->vcc, qfprom_blow_uV, INT_MAX);
- 	if (ret) {
--		dev_err(priv->dev, "Failed to set 1.8 voltage\n");
-+		dev_err(priv->dev, "Failed to set %duV\n", qfprom_blow_uV);
- 		goto err_clk_rate_set;
- 	}
- 
-@@ -311,6 +323,14 @@ static const struct qfprom_soc_data qfpr
- 	.accel_value = 0xD10,
- 	.qfprom_blow_timer_value = 25,
- 	.qfprom_blow_set_freq = 4800000,
-+	.qfprom_blow_uV = 1800000,
-+};
-+
-+static const struct qfprom_soc_data qfprom_7_15_data = {
-+	.accel_value = 0xD08,
-+	.qfprom_blow_timer_value = 24,
-+	.qfprom_blow_set_freq = 4800000,
-+	.qfprom_blow_uV = 1900000,
- };
- 
- static int qfprom_probe(struct platform_device *pdev)
-@@ -379,6 +399,8 @@ static int qfprom_probe(struct platform_
- 
- 		if (major_version == 7 && minor_version == 8)
- 			priv->soc_data = &qfprom_7_8_data;
-+		if (major_version == 7 && minor_version == 15)
-+			priv->soc_data = &qfprom_7_15_data;
- 
- 		priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
- 		if (IS_ERR(priv->vcc))
-@@ -405,6 +427,7 @@ static int qfprom_probe(struct platform_
- static const struct of_device_id qfprom_of_match[] = {
- 	{ .compatible = "qcom,qfprom",},
- 	{ .compatible = "qcom,sc7180-qfprom", .data = &sc7180_qfprom},
-+	{ .compatible = "qcom,sc7280-qfprom", .data = &sc7280_qfprom},
- 	{/* sentinel */},
- };
- MODULE_DEVICE_TABLE(of, qfprom_of_match);
diff --git a/target/linux/generic/backport-5.10/804-v5.14-0001-nvmem-core-allow-specifying-of_node.patch b/target/linux/generic/backport-5.10/804-v5.14-0001-nvmem-core-allow-specifying-of_node.patch
deleted file mode 100644
index f3debe84f38a..000000000000
--- a/target/linux/generic/backport-5.10/804-v5.14-0001-nvmem-core-allow-specifying-of_node.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 1333a6779501f4cc662ff5c8b36b0a22f3a7ddc6 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Sat, 24 Apr 2021 13:06:04 +0200
-Subject: [PATCH] nvmem: core: allow specifying of_node
-
-Until now, the of_node of the parent device is used. Some devices
-provide more than just the nvmem provider. To avoid name space clashes,
-add a way to allow specifying the nvmem cells in subnodes. Consider the
-following example:
-
-    flash@0 {
-        compatible = "jedec,spi-nor";
-
-        partitions {
-            compatible = "fixed-partitions";
-            #address-cells = <1>;
-            #size-cells = <1>;
-
-            partition@0 {
-                reg = <0x000000 0x010000>;
-            };
-        };
-
-        otp {
-            compatible = "user-otp";
-            #address-cells = <1>;
-            #size-cells = <1>;
-
-            serial-number@0 {
-                reg = <0x0 0x8>;
-            };
-        };
-    };
-
-There the nvmem provider might be the MTD partition or the OTP region of
-the flash.
-
-Add a new config->of_node parameter, which if set, will be used instead
-of the parent's of_node.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210424110608.15748-2-michael@walle.cc
----
- drivers/nvmem/core.c           | 4 +++-
- include/linux/nvmem-provider.h | 2 ++
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -795,7 +795,9 @@ struct nvmem_device *nvmem_register(cons
- 	nvmem->reg_write = config->reg_write;
- 	nvmem->keepout = config->keepout;
- 	nvmem->nkeepout = config->nkeepout;
--	if (!config->no_of_node)
-+	if (config->of_node)
-+		nvmem->dev.of_node = config->of_node;
-+	else if (!config->no_of_node)
- 		nvmem->dev.of_node = config->dev->of_node;
- 
- 	switch (config->id) {
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -57,6 +57,7 @@ struct nvmem_keepout {
-  * @type:	Type of the nvmem storage
-  * @read_only:	Device is read-only.
-  * @root_only:	Device is accessibly to root only.
-+ * @of_node:	If given, this will be used instead of the parent's of_node.
-  * @no_of_node:	Device should not use the parent's of_node even if it's !NULL.
-  * @reg_read:	Callback to read data.
-  * @reg_write:	Callback to write data.
-@@ -85,6 +86,7 @@ struct nvmem_config {
- 	enum nvmem_type		type;
- 	bool			read_only;
- 	bool			root_only;
-+	struct device_node	*of_node;
- 	bool			ignore_wp;
- 	bool			no_of_node;
- 	nvmem_reg_read_t	reg_read;
diff --git a/target/linux/generic/backport-5.10/804-v5.14-0002-nvmem-sprd-Fix-an-error-message.patch b/target/linux/generic/backport-5.10/804-v5.14-0002-nvmem-sprd-Fix-an-error-message.patch
deleted file mode 100644
index db88328a1189..000000000000
--- a/target/linux/generic/backport-5.10/804-v5.14-0002-nvmem-sprd-Fix-an-error-message.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 20be064ec864086bca7a4eb62c772a397b44afb7 Mon Sep 17 00:00:00 2001
-From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
-Date: Fri, 7 May 2021 19:02:48 +0200
-Subject: [PATCH] nvmem: sprd: Fix an error message
-
-'ret' is known to be 0 here.
-The expected error status is stored in 'status', so use it instead.
-
-Also change %d in %u, because status is an u32, not a int.
-
-Fixes: 096030e7f449 ("nvmem: sprd: Add Spreadtrum SoCs eFuse support")
-Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
-Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
-Link: https://lore.kernel.org/r/5bc44aace2fe7e1c91d8b35c8fe31e7134ceab2c.1620406852.git.christophe.jaillet@wanadoo.fr
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/sprd-efuse.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/sprd-efuse.c
-+++ b/drivers/nvmem/sprd-efuse.c
-@@ -234,7 +234,7 @@ static int sprd_efuse_raw_prog(struct sp
- 	status = readl(efuse->base + SPRD_EFUSE_ERR_FLAG);
- 	if (status) {
- 		dev_err(efuse->dev,
--			"write error status %d of block %d\n", ret, blk);
-+			"write error status %u of block %d\n", status, blk);
- 
- 		writel(SPRD_EFUSE_ERR_CLR_MASK,
- 		       efuse->base + SPRD_EFUSE_ERR_CLR);
diff --git a/target/linux/generic/backport-5.10/804-v5.14-0003-nvmem-sunxi_sid-Set-type-to-OTP.patch b/target/linux/generic/backport-5.10/804-v5.14-0003-nvmem-sunxi_sid-Set-type-to-OTP.patch
deleted file mode 100644
index 37694e542424..000000000000
--- a/target/linux/generic/backport-5.10/804-v5.14-0003-nvmem-sunxi_sid-Set-type-to-OTP.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 78a005a22d5608b266eafa011b093a33284c52ce Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Fri, 11 Jun 2021 09:33:45 +0100
-Subject: [PATCH] nvmem: sunxi_sid: Set type to OTP
-
-This device currently reports an "Unknown" type in sysfs.
-Since it is an eFuse hardware device, set its type to OTP.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210611083348.20170-7-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/sunxi_sid.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/nvmem/sunxi_sid.c
-+++ b/drivers/nvmem/sunxi_sid.c
-@@ -142,6 +142,7 @@ static int sunxi_sid_probe(struct platfo
- 
- 	nvmem_cfg->dev = dev;
- 	nvmem_cfg->name = "sunxi-sid";
-+	nvmem_cfg->type = NVMEM_TYPE_OTP;
- 	nvmem_cfg->read_only = true;
- 	nvmem_cfg->size = cfg->size;
- 	nvmem_cfg->word_size = 1;
diff --git a/target/linux/generic/backport-5.10/804-v5.14-0004-nvmem-qfprom-minor-nit-fixes.patch b/target/linux/generic/backport-5.10/804-v5.14-0004-nvmem-qfprom-minor-nit-fixes.patch
deleted file mode 100644
index bcab3e41fd74..000000000000
--- a/target/linux/generic/backport-5.10/804-v5.14-0004-nvmem-qfprom-minor-nit-fixes.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From c813bb37bd32cb967060a2c573fae4ea518d32eb Mon Sep 17 00:00:00 2001
-From: Rajendra Nayak <rnayak@codeaurora.org>
-Date: Fri, 11 Jun 2021 09:33:46 +0100
-Subject: [PATCH] nvmem: qfprom: minor nit fixes
-
-Fix a missed newline, change an 'if' to 'else if' and update
-a comment which is stale after the merge of '5a1bea2a: nvmem:
-qfprom: Add support for fuseblowing on sc7280'
-
-Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
-Reviewed-by: Douglas Anderson <dianders@chromium.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210611083348.20170-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qfprom.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/nvmem/qfprom.c
-+++ b/drivers/nvmem/qfprom.c
-@@ -122,6 +122,7 @@ static const struct qfprom_soc_compatibl
- 	.keepout = sc7280_qfprom_keepout,
- 	.nkeepout = ARRAY_SIZE(sc7280_qfprom_keepout)
- };
-+
- /**
-  * qfprom_disable_fuse_blowing() - Undo enabling of fuse blowing.
-  * @priv: Our driver data.
-@@ -195,7 +196,7 @@ static int qfprom_enable_fuse_blowing(co
- 	}
- 
- 	/*
--	 * Hardware requires 1.8V min for fuse blowing; this may be
-+	 * Hardware requires a min voltage for fuse blowing; this may be
- 	 * a rail shared do don't specify a max--regulator constraints
- 	 * will handle.
- 	 */
-@@ -399,7 +400,7 @@ static int qfprom_probe(struct platform_
- 
- 		if (major_version == 7 && minor_version == 8)
- 			priv->soc_data = &qfprom_7_8_data;
--		if (major_version == 7 && minor_version == 15)
-+		else if (major_version == 7 && minor_version == 15)
- 			priv->soc_data = &qfprom_7_15_data;
- 
- 		priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
diff --git a/target/linux/generic/backport-5.10/804-v5.14-0005-nvmem-core-constify-nvmem_cell_read_variable_common-.patch b/target/linux/generic/backport-5.10/804-v5.14-0005-nvmem-core-constify-nvmem_cell_read_variable_common-.patch
deleted file mode 100644
index 3162a5362e5b..000000000000
--- a/target/linux/generic/backport-5.10/804-v5.14-0005-nvmem-core-constify-nvmem_cell_read_variable_common-.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 1f7b4d87874624f4beb25253900a25306a193b8b Mon Sep 17 00:00:00 2001
-From: Douglas Anderson <dianders@chromium.org>
-Date: Fri, 11 Jun 2021 09:33:47 +0100
-Subject: [PATCH] nvmem: core: constify nvmem_cell_read_variable_common()
- return value
-
-The caller doesn't modify the memory pointed to by the pointer so it
-can be const.
-
-Suggested-by: Stephen Boyd <swboyd@chromium.org>
-Signed-off-by: Douglas Anderson <dianders@chromium.org>
-Reviewed-by: Stephen Boyd <swboyd@chromium.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210611083348.20170-9-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -1615,9 +1615,9 @@ int nvmem_cell_read_u64(struct device *d
- }
- EXPORT_SYMBOL_GPL(nvmem_cell_read_u64);
- 
--static void *nvmem_cell_read_variable_common(struct device *dev,
--					     const char *cell_id,
--					     size_t max_len, size_t *len)
-+static const void *nvmem_cell_read_variable_common(struct device *dev,
-+						   const char *cell_id,
-+						   size_t max_len, size_t *len)
- {
- 	struct nvmem_cell *cell;
- 	int nbits;
-@@ -1661,7 +1661,7 @@ int nvmem_cell_read_variable_le_u32(stru
- 				    u32 *val)
- {
- 	size_t len;
--	u8 *buf;
-+	const u8 *buf;
- 	int i;
- 
- 	buf = nvmem_cell_read_variable_common(dev, cell_id, sizeof(*val), &len);
-@@ -1692,7 +1692,7 @@ int nvmem_cell_read_variable_le_u64(stru
- 				    u64 *val)
- {
- 	size_t len;
--	u8 *buf;
-+	const u8 *buf;
- 	int i;
- 
- 	buf = nvmem_cell_read_variable_common(dev, cell_id, sizeof(*val), &len);
diff --git a/target/linux/generic/backport-5.10/804-v5.14-0006-nvmem-qfprom-Improve-the-comment-about-regulator-set.patch b/target/linux/generic/backport-5.10/804-v5.14-0006-nvmem-qfprom-Improve-the-comment-about-regulator-set.patch
deleted file mode 100644
index d7ef8e620f1d..000000000000
--- a/target/linux/generic/backport-5.10/804-v5.14-0006-nvmem-qfprom-Improve-the-comment-about-regulator-set.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 989f77e3fdee2e8f414dd1da9b6397d8763d414e Mon Sep 17 00:00:00 2001
-From: Douglas Anderson <dianders@chromium.org>
-Date: Fri, 11 Jun 2021 09:33:48 +0100
-Subject: [PATCH] nvmem: qfprom: Improve the comment about regulator setting
-
-In review feedback Joe Perches found the existing comment
-confusing. Let's use something based on the wording proposed by Joe.
-
-Suggested-by: Joe Perches <joe@perches.com>
-Signed-off-by: Douglas Anderson <dianders@chromium.org>
-Reviewed-by: Stephen Boyd <swboyd@chromium.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210611083348.20170-10-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qfprom.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/nvmem/qfprom.c
-+++ b/drivers/nvmem/qfprom.c
-@@ -196,9 +196,9 @@ static int qfprom_enable_fuse_blowing(co
- 	}
- 
- 	/*
--	 * Hardware requires a min voltage for fuse blowing; this may be
--	 * a rail shared do don't specify a max--regulator constraints
--	 * will handle.
-+	 * Hardware requires a minimum voltage for fuse blowing.
-+	 * This may be a shared rail so don't specify a maximum.
-+	 * Regulator constraints will cap to the actual maximum.
- 	 */
- 	ret = regulator_set_voltage(priv->vcc, qfprom_blow_uV, INT_MAX);
- 	if (ret) {
diff --git a/target/linux/generic/backport-5.10/804-v5.14-0007-nvmem-add-NVMEM_TYPE_FRAM.patch b/target/linux/generic/backport-5.10/804-v5.14-0007-nvmem-add-NVMEM_TYPE_FRAM.patch
deleted file mode 100644
index 06c541b8e672..000000000000
--- a/target/linux/generic/backport-5.10/804-v5.14-0007-nvmem-add-NVMEM_TYPE_FRAM.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From: Rafał Miłecki <rafal@milecki.pl>
-Subject: [PATCH] nvmem: add NVMEM_TYPE_FRAM
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -180,6 +180,7 @@ static const char * const nvmem_type_str
- 	[NVMEM_TYPE_EEPROM] = "EEPROM",
- 	[NVMEM_TYPE_OTP] = "OTP",
- 	[NVMEM_TYPE_BATTERY_BACKED] = "Battery backed",
-+	[NVMEM_TYPE_FRAM] = "FRAM",
- };
- 
- #ifdef CONFIG_DEBUG_LOCK_ALLOC
-@@ -361,6 +362,9 @@ static int nvmem_sysfs_setup_compat(stru
- 	if (!config->base_dev)
- 		return -EINVAL;
- 
-+	if (config->type == NVMEM_TYPE_FRAM)
-+		bin_attr_nvmem_eeprom_compat.attr.name = "fram";
-+
- 	nvmem->eeprom = bin_attr_nvmem_eeprom_compat;
- 	nvmem->eeprom.attr.mode = nvmem_bin_attr_get_umode(nvmem);
- 	nvmem->eeprom.size = nvmem->size;
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -25,6 +25,7 @@ enum nvmem_type {
- 	NVMEM_TYPE_EEPROM,
- 	NVMEM_TYPE_OTP,
- 	NVMEM_TYPE_BATTERY_BACKED,
-+	NVMEM_TYPE_FRAM,
- };
- 
- #define NVMEM_DEVID_NONE	(-1)
diff --git a/target/linux/generic/backport-5.10/805-v5.15-0002-nvmem-qfprom-sc7280-Handle-the-additional-power-doma.patch b/target/linux/generic/backport-5.10/805-v5.15-0002-nvmem-qfprom-sc7280-Handle-the-additional-power-doma.patch
deleted file mode 100644
index b71edd0306da..000000000000
--- a/target/linux/generic/backport-5.10/805-v5.15-0002-nvmem-qfprom-sc7280-Handle-the-additional-power-doma.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From 7b808449f572d07bee840cd9da7e2fe6a1b8f4b5 Mon Sep 17 00:00:00 2001
-From: Rajendra Nayak <rnayak@codeaurora.org>
-Date: Fri, 6 Aug 2021 09:59:46 +0100
-Subject: [PATCH] nvmem: qfprom: sc7280: Handle the additional power-domains
- vote
-
-On sc7280, to reliably blow fuses, we need an additional vote
-on max performance state of 'MX' power-domain.
-Add support for power-domain performance state voting in the
-driver.
-
-Reviewed-by: Douglas Anderson <dianders@chromium.org>
-Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210806085947.22682-4-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qfprom.c | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/drivers/nvmem/qfprom.c
-+++ b/drivers/nvmem/qfprom.c
-@@ -12,6 +12,8 @@
- #include <linux/mod_devicetable.h>
- #include <linux/nvmem-provider.h>
- #include <linux/platform_device.h>
-+#include <linux/pm_domain.h>
-+#include <linux/pm_runtime.h>
- #include <linux/property.h>
- #include <linux/regulator/consumer.h>
- 
-@@ -142,6 +144,9 @@ static void qfprom_disable_fuse_blowing(
- 	writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
- 	writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
- 
-+	dev_pm_genpd_set_performance_state(priv->dev, 0);
-+	pm_runtime_put(priv->dev);
-+
- 	/*
- 	 * This may be a shared rail and may be able to run at a lower rate
- 	 * when we're not blowing fuses.  At the moment, the regulator framework
-@@ -212,6 +217,14 @@ static int qfprom_enable_fuse_blowing(co
- 		goto err_clk_rate_set;
- 	}
- 
-+	ret = pm_runtime_get_sync(priv->dev);
-+	if (ret < 0) {
-+		pm_runtime_put_noidle(priv->dev);
-+		dev_err(priv->dev, "Failed to enable power-domain\n");
-+		goto err_reg_enable;
-+	}
-+	dev_pm_genpd_set_performance_state(priv->dev, INT_MAX);
-+
- 	old->timer_val = readl(priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
- 	old->accel_val = readl(priv->qfpconf + QFPROM_ACCEL_OFFSET);
- 	writel(priv->soc_data->qfprom_blow_timer_value,
-@@ -221,6 +234,8 @@ static int qfprom_enable_fuse_blowing(co
- 
- 	return 0;
- 
-+err_reg_enable:
-+	regulator_disable(priv->vcc);
- err_clk_rate_set:
- 	clk_set_rate(priv->secclk, old->clk_rate);
- err_clk_prepared:
-@@ -320,6 +335,11 @@ static int qfprom_reg_read(void *context
- 	return 0;
- }
- 
-+static void qfprom_runtime_disable(void *data)
-+{
-+	pm_runtime_disable(data);
-+}
-+
- static const struct qfprom_soc_data qfprom_7_8_data = {
- 	.accel_value = 0xD10,
- 	.qfprom_blow_timer_value = 25,
-@@ -420,6 +440,11 @@ static int qfprom_probe(struct platform_
- 			econfig.reg_write = qfprom_reg_write;
- 	}
- 
-+	pm_runtime_enable(dev);
-+	ret = devm_add_action_or_reset(dev, qfprom_runtime_disable, dev);
-+	if (ret)
-+		return ret;
-+
- 	nvmem = devm_nvmem_register(dev, &econfig);
- 
- 	return PTR_ERR_OR_ZERO(nvmem);
diff --git a/target/linux/generic/backport-5.10/805-v5.15-0003-nvmem-core-fix-error-handling-while-validating-keepo.patch b/target/linux/generic/backport-5.10/805-v5.15-0003-nvmem-core-fix-error-handling-while-validating-keepo.patch
deleted file mode 100644
index 7951cc73004b..000000000000
--- a/target/linux/generic/backport-5.10/805-v5.15-0003-nvmem-core-fix-error-handling-while-validating-keepo.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From de0534df93474f268486c486ea7e01b44a478026 Mon Sep 17 00:00:00 2001
-From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Date: Fri, 6 Aug 2021 09:59:47 +0100
-Subject: [PATCH] nvmem: core: fix error handling while validating keepout
- regions
-
-Current error path on failure of validating keepout regions is calling
-put_device, eventhough the device is not even registered at that point.
-
-Fix this by adding proper error handling of freeing ida and nvmem.
-
-Fixes: fd3bb8f54a88 ("nvmem: core: Add support for keepout regions")
-Cc: <stable@vger.kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210806085947.22682-5-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -850,8 +850,11 @@ struct nvmem_device *nvmem_register(cons
- 
- 	if (nvmem->nkeepout) {
- 		rval = nvmem_validate_keepouts(nvmem);
--		if (rval)
--			goto err_put_device;
-+		if (rval) {
-+			ida_free(&nvmem_ida, nvmem->id);
-+			kfree(nvmem);
-+			return ERR_PTR(rval);
-+		}
- 	}
- 
- 	dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
diff --git a/target/linux/generic/backport-5.10/805-v5.15-0004-nvmem-nintendo-otp-Add-new-driver-for-the-Wii-and-Wi.patch b/target/linux/generic/backport-5.10/805-v5.15-0004-nvmem-nintendo-otp-Add-new-driver-for-the-Wii-and-Wi.patch
deleted file mode 100644
index 62d9e2aa0f00..000000000000
--- a/target/linux/generic/backport-5.10/805-v5.15-0004-nvmem-nintendo-otp-Add-new-driver-for-the-Wii-and-Wi.patch
+++ /dev/null
@@ -1,191 +0,0 @@
-From 3683b761fe3a10ad18515acd5368dd601268cfe5 Mon Sep 17 00:00:00 2001
-From: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
-Date: Tue, 10 Aug 2021 16:30:36 +0100
-Subject: [PATCH] nvmem: nintendo-otp: Add new driver for the Wii and Wii U OTP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This OTP is read-only and contains various keys used by the console to
-decrypt, encrypt or verify various pieces of storage.
-
-Its size depends on the console, it is 128 bytes on the Wii and
-1024 bytes on the Wii U (split into eight 128 bytes banks).
-
-It can be used directly by writing into one register and reading from
-the other one, without any additional synchronisation.
-
-This driver was written based on reversed documentation, see:
-https://wiiubrew.org/wiki/Hardware/OTP
-
-Tested-by: Jonathan Neuschäfer <j.ne@posteo.net>  # on Wii
-Tested-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>  # on Wii U
-Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20210810153036.1494-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig        |  11 ++++
- drivers/nvmem/Makefile       |   2 +
- drivers/nvmem/nintendo-otp.c | 124 +++++++++++++++++++++++++++++++++++
- 3 files changed, 137 insertions(+)
- create mode 100644 drivers/nvmem/nintendo-otp.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -107,6 +107,17 @@ config MTK_EFUSE
- 	  This driver can also be built as a module. If so, the module
- 	  will be called efuse-mtk.
- 
-+config NVMEM_NINTENDO_OTP
-+	tristate "Nintendo Wii and Wii U OTP Support"
-+	help
-+	  This is a driver exposing the OTP of a Nintendo Wii or Wii U console.
-+
-+	  This memory contains common and per-console keys, signatures and
-+	  related data required to access peripherals.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called nvmem-nintendo-otp.
-+
- config QCOM_QFPROM
- 	tristate "QCOM QFPROM Support"
- 	depends on ARCH_QCOM || COMPILE_TEST
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -23,6 +23,8 @@ obj-$(CONFIG_NVMEM_LPC18XX_OTP)	+= nvmem
- nvmem_lpc18xx_otp-y		:= lpc18xx_otp.o
- obj-$(CONFIG_NVMEM_MXS_OCOTP)	+= nvmem-mxs-ocotp.o
- nvmem-mxs-ocotp-y		:= mxs-ocotp.o
-+obj-$(CONFIG_NVMEM_NINTENDO_OTP)	+= nvmem-nintendo-otp.o
-+nvmem-nintendo-otp-y		:= nintendo-otp.o
- obj-$(CONFIG_MTK_EFUSE)		+= nvmem_mtk-efuse.o
- nvmem_mtk-efuse-y		:= mtk-efuse.o
- obj-$(CONFIG_QCOM_QFPROM)	+= nvmem_qfprom.o
---- /dev/null
-+++ b/drivers/nvmem/nintendo-otp.c
-@@ -0,0 +1,124 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Nintendo Wii and Wii U OTP driver
-+ *
-+ * This is a driver exposing the OTP of a Nintendo Wii or Wii U console.
-+ *
-+ * This memory contains common and per-console keys, signatures and
-+ * related data required to access peripherals.
-+ *
-+ * Based on reversed documentation from https://wiiubrew.org/wiki/Hardware/OTP
-+ *
-+ * Copyright (C) 2021 Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#define HW_OTPCMD  0
-+#define HW_OTPDATA 4
-+#define OTP_READ   0x80000000
-+#define BANK_SIZE  128
-+#define WORD_SIZE  4
-+
-+struct nintendo_otp_priv {
-+	void __iomem *regs;
-+};
-+
-+struct nintendo_otp_devtype_data {
-+	const char *name;
-+	unsigned int num_banks;
-+};
-+
-+static const struct nintendo_otp_devtype_data hollywood_otp_data = {
-+	.name = "wii-otp",
-+	.num_banks = 1,
-+};
-+
-+static const struct nintendo_otp_devtype_data latte_otp_data = {
-+	.name = "wiiu-otp",
-+	.num_banks = 8,
-+};
-+
-+static int nintendo_otp_reg_read(void *context,
-+				 unsigned int reg, void *_val, size_t bytes)
-+{
-+	struct nintendo_otp_priv *priv = context;
-+	u32 *val = _val;
-+	int words = bytes / WORD_SIZE;
-+	u32 bank, addr;
-+
-+	while (words--) {
-+		bank = (reg / BANK_SIZE) << 8;
-+		addr = (reg / WORD_SIZE) % (BANK_SIZE / WORD_SIZE);
-+		iowrite32be(OTP_READ | bank | addr, priv->regs + HW_OTPCMD);
-+		*val++ = ioread32be(priv->regs + HW_OTPDATA);
-+		reg += WORD_SIZE;
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id nintendo_otp_of_table[] = {
-+	{ .compatible = "nintendo,hollywood-otp", .data = &hollywood_otp_data },
-+	{ .compatible = "nintendo,latte-otp", .data = &latte_otp_data },
-+	{/* sentinel */},
-+};
-+MODULE_DEVICE_TABLE(of, nintendo_otp_of_table);
-+
-+static int nintendo_otp_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	const struct of_device_id *of_id =
-+		of_match_device(nintendo_otp_of_table, dev);
-+	struct resource *res;
-+	struct nvmem_device *nvmem;
-+	struct nintendo_otp_priv *priv;
-+
-+	struct nvmem_config config = {
-+		.stride = WORD_SIZE,
-+		.word_size = WORD_SIZE,
-+		.reg_read = nintendo_otp_reg_read,
-+		.read_only = true,
-+		.root_only = true,
-+	};
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	priv->regs = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(priv->regs))
-+		return PTR_ERR(priv->regs);
-+
-+	if (of_id->data) {
-+		const struct nintendo_otp_devtype_data *data = of_id->data;
-+		config.name = data->name;
-+		config.size = data->num_banks * BANK_SIZE;
-+	}
-+
-+	config.dev = dev;
-+	config.priv = priv;
-+
-+	nvmem = devm_nvmem_register(dev, &config);
-+
-+	return PTR_ERR_OR_ZERO(nvmem);
-+}
-+
-+static struct platform_driver nintendo_otp_driver = {
-+	.probe = nintendo_otp_probe,
-+	.driver = {
-+		.name = "nintendo-otp",
-+		.of_match_table = nintendo_otp_of_table,
-+	},
-+};
-+module_platform_driver(nintendo_otp_driver);
-+MODULE_AUTHOR("Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>");
-+MODULE_DESCRIPTION("Nintendo Wii and Wii U OTP driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/backport-5.10/805-v5.15-0005-nvmem-NVMEM_NINTENDO_OTP-should-depend-on-WII.patch b/target/linux/generic/backport-5.10/805-v5.15-0005-nvmem-NVMEM_NINTENDO_OTP-should-depend-on-WII.patch
deleted file mode 100644
index 02f8b6c56226..000000000000
--- a/target/linux/generic/backport-5.10/805-v5.15-0005-nvmem-NVMEM_NINTENDO_OTP-should-depend-on-WII.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 7af526c740bdbd5b4dcebba04ace5b3b0c07801f Mon Sep 17 00:00:00 2001
-From: Geert Uytterhoeven <geert+renesas@glider.be>
-Date: Tue, 14 Sep 2021 11:29:49 +0200
-Subject: [PATCH] nvmem: NVMEM_NINTENDO_OTP should depend on WII
-
-The Nintendo Wii and Wii U OTP is only present on Nintendo Wii and Wii U
-consoles.  Hence add a dependency on WII, to prevent asking the user
-about this driver when configuring a kernel without Nintendo Wii and Wii
-U console support.
-
-Fixes: 3683b761fe3a10ad ("nvmem: nintendo-otp: Add new driver for the Wii and Wii U OTP")
-Reviewed-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
-Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-Link: https://lore.kernel.org/r/01318920709dddc4d85fe895e2083ca0eee234d8.1631611652.git.geert+renesas@glider.be
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -109,6 +109,7 @@ config MTK_EFUSE
- 
- config NVMEM_NINTENDO_OTP
- 	tristate "Nintendo Wii and Wii U OTP Support"
-+	depends on WII || COMPILE_TEST
- 	help
- 	  This is a driver exposing the OTP of a Nintendo Wii or Wii U console.
- 
diff --git a/target/linux/generic/backport-5.10/806-v5.16-0001-nvmem-core-rework-nvmem-cell-instance-creation.patch b/target/linux/generic/backport-5.10/806-v5.16-0001-nvmem-core-rework-nvmem-cell-instance-creation.patch
deleted file mode 100644
index 0b87172b2d68..000000000000
--- a/target/linux/generic/backport-5.10/806-v5.16-0001-nvmem-core-rework-nvmem-cell-instance-creation.patch
+++ /dev/null
@@ -1,456 +0,0 @@
-From 7ae6478b304bc004c3139b422665b0e23b57f05c Mon Sep 17 00:00:00 2001
-From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Date: Wed, 13 Oct 2021 14:19:55 +0100
-Subject: [PATCH] nvmem: core: rework nvmem cell instance creation
-
-In the existing design, we do not create a instance per nvmem cell consumer
-but we directly refer cell from nvmem cell list that are added to provider.
-
-However this design has some limitations when consumers want to assign name
-or connection id the nvmem cell instance, ex: via "nvmem-cell-names" or
-id in nvmem_cell_get(id).
-
-Having a name associated with nvmem cell consumer instance will help
-provider drivers in performing post processing of nvmem cell data if required
-before data is seen by the consumers. This is pretty normal with some vendors
-storing nvmem cells like mac-address in a vendor specific data layouts that
-are not directly usable by the consumer drivers.
-
-With this patch nvmem cell will be created dynamically during nvmem_cell_get
-and destroyed in nvmem_cell_put, allowing consumers to associate name with
-nvmem cell consumer instance.
-
-With this patch a new struct nvmem_cell_entry replaces struct nvmem_cell
-for storing nvmem cell information within the core.
-This patch does not change nvmem-consumer interface based on nvmem_cell.
-
-Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20211013131957.30271-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 165 +++++++++++++++++++++++++++----------------
- 1 file changed, 105 insertions(+), 60 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -45,8 +45,7 @@ struct nvmem_device {
- #define to_nvmem_device(d) container_of(d, struct nvmem_device, dev)
- 
- #define FLAG_COMPAT		BIT(0)
--
--struct nvmem_cell {
-+struct nvmem_cell_entry {
- 	const char		*name;
- 	int			offset;
- 	int			bytes;
-@@ -57,6 +56,11 @@ struct nvmem_cell {
- 	struct list_head	node;
- };
- 
-+struct nvmem_cell {
-+	struct nvmem_cell_entry *entry;
-+	const char		*id;
-+};
-+
- static DEFINE_MUTEX(nvmem_mutex);
- static DEFINE_IDA(nvmem_ida);
- 
-@@ -424,7 +428,7 @@ static struct bus_type nvmem_bus_type =
- 	.name		= "nvmem",
- };
- 
--static void nvmem_cell_drop(struct nvmem_cell *cell)
-+static void nvmem_cell_entry_drop(struct nvmem_cell_entry *cell)
- {
- 	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_CELL_REMOVE, cell);
- 	mutex_lock(&nvmem_mutex);
-@@ -437,13 +441,13 @@ static void nvmem_cell_drop(struct nvmem
- 
- static void nvmem_device_remove_all_cells(const struct nvmem_device *nvmem)
- {
--	struct nvmem_cell *cell, *p;
-+	struct nvmem_cell_entry *cell, *p;
- 
- 	list_for_each_entry_safe(cell, p, &nvmem->cells, node)
--		nvmem_cell_drop(cell);
-+		nvmem_cell_entry_drop(cell);
- }
- 
--static void nvmem_cell_add(struct nvmem_cell *cell)
-+static void nvmem_cell_entry_add(struct nvmem_cell_entry *cell)
- {
- 	mutex_lock(&nvmem_mutex);
- 	list_add_tail(&cell->node, &cell->nvmem->cells);
-@@ -451,9 +455,9 @@ static void nvmem_cell_add(struct nvmem_
- 	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_CELL_ADD, cell);
- }
- 
--static int nvmem_cell_info_to_nvmem_cell_nodup(struct nvmem_device *nvmem,
--					const struct nvmem_cell_info *info,
--					struct nvmem_cell *cell)
-+static int nvmem_cell_info_to_nvmem_cell_entry_nodup(struct nvmem_device *nvmem,
-+						     const struct nvmem_cell_info *info,
-+						     struct nvmem_cell_entry *cell)
- {
- 	cell->nvmem = nvmem;
- 	cell->offset = info->offset;
-@@ -477,13 +481,13 @@ static int nvmem_cell_info_to_nvmem_cell
- 	return 0;
- }
- 
--static int nvmem_cell_info_to_nvmem_cell(struct nvmem_device *nvmem,
--				const struct nvmem_cell_info *info,
--				struct nvmem_cell *cell)
-+static int nvmem_cell_info_to_nvmem_cell_entry(struct nvmem_device *nvmem,
-+					       const struct nvmem_cell_info *info,
-+					       struct nvmem_cell_entry *cell)
- {
- 	int err;
- 
--	err = nvmem_cell_info_to_nvmem_cell_nodup(nvmem, info, cell);
-+	err = nvmem_cell_info_to_nvmem_cell_entry_nodup(nvmem, info, cell);
- 	if (err)
- 		return err;
- 
-@@ -507,7 +511,7 @@ static int nvmem_add_cells(struct nvmem_
- 		    const struct nvmem_cell_info *info,
- 		    int ncells)
- {
--	struct nvmem_cell **cells;
-+	struct nvmem_cell_entry **cells;
- 	int i, rval;
- 
- 	cells = kcalloc(ncells, sizeof(*cells), GFP_KERNEL);
-@@ -521,13 +525,13 @@ static int nvmem_add_cells(struct nvmem_
- 			goto err;
- 		}
- 
--		rval = nvmem_cell_info_to_nvmem_cell(nvmem, &info[i], cells[i]);
-+		rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, &info[i], cells[i]);
- 		if (rval) {
- 			kfree(cells[i]);
- 			goto err;
- 		}
- 
--		nvmem_cell_add(cells[i]);
-+		nvmem_cell_entry_add(cells[i]);
- 	}
- 
- 	/* remove tmp array */
-@@ -536,7 +540,7 @@ static int nvmem_add_cells(struct nvmem_
- 	return 0;
- err:
- 	while (i--)
--		nvmem_cell_drop(cells[i]);
-+		nvmem_cell_entry_drop(cells[i]);
- 
- 	kfree(cells);
- 
-@@ -573,7 +577,7 @@ static int nvmem_add_cells_from_table(st
- {
- 	const struct nvmem_cell_info *info;
- 	struct nvmem_cell_table *table;
--	struct nvmem_cell *cell;
-+	struct nvmem_cell_entry *cell;
- 	int rval = 0, i;
- 
- 	mutex_lock(&nvmem_cell_mutex);
-@@ -588,15 +592,13 @@ static int nvmem_add_cells_from_table(st
- 					goto out;
- 				}
- 
--				rval = nvmem_cell_info_to_nvmem_cell(nvmem,
--								     info,
--								     cell);
-+				rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, info, cell);
- 				if (rval) {
- 					kfree(cell);
- 					goto out;
- 				}
- 
--				nvmem_cell_add(cell);
-+				nvmem_cell_entry_add(cell);
- 			}
- 		}
- 	}
-@@ -606,10 +608,10 @@ out:
- 	return rval;
- }
- 
--static struct nvmem_cell *
--nvmem_find_cell_by_name(struct nvmem_device *nvmem, const char *cell_id)
-+static struct nvmem_cell_entry *
-+nvmem_find_cell_entry_by_name(struct nvmem_device *nvmem, const char *cell_id)
- {
--	struct nvmem_cell *iter, *cell = NULL;
-+	struct nvmem_cell_entry *iter, *cell = NULL;
- 
- 	mutex_lock(&nvmem_mutex);
- 	list_for_each_entry(iter, &nvmem->cells, node) {
-@@ -680,7 +682,7 @@ static int nvmem_add_cells_from_of(struc
- {
- 	struct device_node *parent, *child;
- 	struct device *dev = &nvmem->dev;
--	struct nvmem_cell *cell;
-+	struct nvmem_cell_entry *cell;
- 	const __be32 *addr;
- 	int len;
- 
-@@ -729,7 +731,7 @@ static int nvmem_add_cells_from_of(struc
- 		}
- 
- 		cell->np = of_node_get(child);
--		nvmem_cell_add(cell);
-+		nvmem_cell_entry_add(cell);
- 	}
- 
- 	return 0;
-@@ -1145,9 +1147,33 @@ struct nvmem_device *devm_nvmem_device_g
- }
- EXPORT_SYMBOL_GPL(devm_nvmem_device_get);
- 
-+static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry, const char *id)
-+{
-+	struct nvmem_cell *cell;
-+	const char *name = NULL;
-+
-+	cell = kzalloc(sizeof(*cell), GFP_KERNEL);
-+	if (!cell)
-+		return ERR_PTR(-ENOMEM);
-+
-+	if (id) {
-+		name = kstrdup_const(id, GFP_KERNEL);
-+		if (!name) {
-+			kfree(cell);
-+			return ERR_PTR(-ENOMEM);
-+		}
-+	}
-+
-+	cell->id = name;
-+	cell->entry = entry;
-+
-+	return cell;
-+}
-+
- static struct nvmem_cell *
- nvmem_cell_get_from_lookup(struct device *dev, const char *con_id)
- {
-+	struct nvmem_cell_entry *cell_entry;
- 	struct nvmem_cell *cell = ERR_PTR(-ENOENT);
- 	struct nvmem_cell_lookup *lookup;
- 	struct nvmem_device *nvmem;
-@@ -1172,11 +1198,15 @@ nvmem_cell_get_from_lookup(struct device
- 				break;
- 			}
- 
--			cell = nvmem_find_cell_by_name(nvmem,
--						       lookup->cell_name);
--			if (!cell) {
-+			cell_entry = nvmem_find_cell_entry_by_name(nvmem,
-+								   lookup->cell_name);
-+			if (!cell_entry) {
- 				__nvmem_device_put(nvmem);
- 				cell = ERR_PTR(-ENOENT);
-+			} else {
-+				cell = nvmem_create_cell(cell_entry, con_id);
-+				if (IS_ERR(cell))
-+					__nvmem_device_put(nvmem);
- 			}
- 			break;
- 		}
-@@ -1187,10 +1217,10 @@ nvmem_cell_get_from_lookup(struct device
- }
- 
- #if IS_ENABLED(CONFIG_OF)
--static struct nvmem_cell *
--nvmem_find_cell_by_node(struct nvmem_device *nvmem, struct device_node *np)
-+static struct nvmem_cell_entry *
-+nvmem_find_cell_entry_by_node(struct nvmem_device *nvmem, struct device_node *np)
- {
--	struct nvmem_cell *iter, *cell = NULL;
-+	struct nvmem_cell_entry *iter, *cell = NULL;
- 
- 	mutex_lock(&nvmem_mutex);
- 	list_for_each_entry(iter, &nvmem->cells, node) {
-@@ -1220,6 +1250,7 @@ struct nvmem_cell *of_nvmem_cell_get(str
- {
- 	struct device_node *cell_np, *nvmem_np;
- 	struct nvmem_device *nvmem;
-+	struct nvmem_cell_entry *cell_entry;
- 	struct nvmem_cell *cell;
- 	int index = 0;
- 
-@@ -1240,12 +1271,16 @@ struct nvmem_cell *of_nvmem_cell_get(str
- 	if (IS_ERR(nvmem))
- 		return ERR_CAST(nvmem);
- 
--	cell = nvmem_find_cell_by_node(nvmem, cell_np);
--	if (!cell) {
-+	cell_entry = nvmem_find_cell_entry_by_node(nvmem, cell_np);
-+	if (!cell_entry) {
- 		__nvmem_device_put(nvmem);
- 		return ERR_PTR(-ENOENT);
- 	}
- 
-+	cell = nvmem_create_cell(cell_entry, id);
-+	if (IS_ERR(cell))
-+		__nvmem_device_put(nvmem);
-+
- 	return cell;
- }
- EXPORT_SYMBOL_GPL(of_nvmem_cell_get);
-@@ -1351,13 +1386,17 @@ EXPORT_SYMBOL(devm_nvmem_cell_put);
-  */
- void nvmem_cell_put(struct nvmem_cell *cell)
- {
--	struct nvmem_device *nvmem = cell->nvmem;
-+	struct nvmem_device *nvmem = cell->entry->nvmem;
-+
-+	if (cell->id)
-+		kfree_const(cell->id);
- 
-+	kfree(cell);
- 	__nvmem_device_put(nvmem);
- }
- EXPORT_SYMBOL_GPL(nvmem_cell_put);
- 
--static void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell, void *buf)
-+static void nvmem_shift_read_buffer_in_place(struct nvmem_cell_entry *cell, void *buf)
- {
- 	u8 *p, *b;
- 	int i, extra, bit_offset = cell->bit_offset;
-@@ -1391,8 +1430,8 @@ static void nvmem_shift_read_buffer_in_p
- }
- 
- static int __nvmem_cell_read(struct nvmem_device *nvmem,
--		      struct nvmem_cell *cell,
--		      void *buf, size_t *len)
-+		      struct nvmem_cell_entry *cell,
-+		      void *buf, size_t *len, const char *id)
- {
- 	int rc;
- 
-@@ -1423,18 +1462,18 @@ static int __nvmem_cell_read(struct nvme
-  */
- void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len)
- {
--	struct nvmem_device *nvmem = cell->nvmem;
-+	struct nvmem_device *nvmem = cell->entry->nvmem;
- 	u8 *buf;
- 	int rc;
- 
- 	if (!nvmem)
- 		return ERR_PTR(-EINVAL);
- 
--	buf = kzalloc(cell->bytes, GFP_KERNEL);
-+	buf = kzalloc(cell->entry->bytes, GFP_KERNEL);
- 	if (!buf)
- 		return ERR_PTR(-ENOMEM);
- 
--	rc = __nvmem_cell_read(nvmem, cell, buf, len);
-+	rc = __nvmem_cell_read(nvmem, cell->entry, buf, len, cell->id);
- 	if (rc) {
- 		kfree(buf);
- 		return ERR_PTR(rc);
-@@ -1444,7 +1483,7 @@ void *nvmem_cell_read(struct nvmem_cell
- }
- EXPORT_SYMBOL_GPL(nvmem_cell_read);
- 
--static void *nvmem_cell_prepare_write_buffer(struct nvmem_cell *cell,
-+static void *nvmem_cell_prepare_write_buffer(struct nvmem_cell_entry *cell,
- 					     u8 *_buf, int len)
- {
- 	struct nvmem_device *nvmem = cell->nvmem;
-@@ -1497,16 +1536,7 @@ err:
- 	return ERR_PTR(rc);
- }
- 
--/**
-- * nvmem_cell_write() - Write to a given nvmem cell
-- *
-- * @cell: nvmem cell to be written.
-- * @buf: Buffer to be written.
-- * @len: length of buffer to be written to nvmem cell.
-- *
-- * Return: length of bytes written or negative on failure.
-- */
--int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len)
-+static int __nvmem_cell_entry_write(struct nvmem_cell_entry *cell, void *buf, size_t len)
- {
- 	struct nvmem_device *nvmem = cell->nvmem;
- 	int rc;
-@@ -1532,6 +1562,21 @@ int nvmem_cell_write(struct nvmem_cell *
- 
- 	return len;
- }
-+
-+/**
-+ * nvmem_cell_write() - Write to a given nvmem cell
-+ *
-+ * @cell: nvmem cell to be written.
-+ * @buf: Buffer to be written.
-+ * @len: length of buffer to be written to nvmem cell.
-+ *
-+ * Return: length of bytes written or negative on failure.
-+ */
-+int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len)
-+{
-+	return __nvmem_cell_entry_write(cell->entry, buf, len);
-+}
-+
- EXPORT_SYMBOL_GPL(nvmem_cell_write);
- 
- static int nvmem_cell_read_common(struct device *dev, const char *cell_id,
-@@ -1634,7 +1679,7 @@ static const void *nvmem_cell_read_varia
- 	if (IS_ERR(cell))
- 		return cell;
- 
--	nbits = cell->nbits;
-+	nbits = cell->entry->nbits;
- 	buf = nvmem_cell_read(cell, len);
- 	nvmem_cell_put(cell);
- 	if (IS_ERR(buf))
-@@ -1730,18 +1775,18 @@ EXPORT_SYMBOL_GPL(nvmem_cell_read_variab
- ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem,
- 			   struct nvmem_cell_info *info, void *buf)
- {
--	struct nvmem_cell cell;
-+	struct nvmem_cell_entry cell;
- 	int rc;
- 	ssize_t len;
- 
- 	if (!nvmem)
- 		return -EINVAL;
- 
--	rc = nvmem_cell_info_to_nvmem_cell_nodup(nvmem, info, &cell);
-+	rc = nvmem_cell_info_to_nvmem_cell_entry_nodup(nvmem, info, &cell);
- 	if (rc)
- 		return rc;
- 
--	rc = __nvmem_cell_read(nvmem, &cell, buf, &len);
-+	rc = __nvmem_cell_read(nvmem, &cell, buf, &len, NULL);
- 	if (rc)
- 		return rc;
- 
-@@ -1761,17 +1806,17 @@ EXPORT_SYMBOL_GPL(nvmem_device_cell_read
- int nvmem_device_cell_write(struct nvmem_device *nvmem,
- 			    struct nvmem_cell_info *info, void *buf)
- {
--	struct nvmem_cell cell;
-+	struct nvmem_cell_entry cell;
- 	int rc;
- 
- 	if (!nvmem)
- 		return -EINVAL;
- 
--	rc = nvmem_cell_info_to_nvmem_cell_nodup(nvmem, info, &cell);
-+	rc = nvmem_cell_info_to_nvmem_cell_entry_nodup(nvmem, info, &cell);
- 	if (rc)
- 		return rc;
- 
--	return nvmem_cell_write(&cell, buf, cell.bytes);
-+	return __nvmem_cell_entry_write(&cell, buf, cell.bytes);
- }
- EXPORT_SYMBOL_GPL(nvmem_device_cell_write);
- 
diff --git a/target/linux/generic/backport-5.10/806-v5.16-0002-nvmem-core-add-nvmem-cell-post-processing-callback.patch b/target/linux/generic/backport-5.10/806-v5.16-0002-nvmem-core-add-nvmem-cell-post-processing-callback.patch
deleted file mode 100644
index 16eb07147eae..000000000000
--- a/target/linux/generic/backport-5.10/806-v5.16-0002-nvmem-core-add-nvmem-cell-post-processing-callback.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 5008062f1c3f5af3acf86164aa6fcc77b0c7bdce Mon Sep 17 00:00:00 2001
-From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Date: Wed, 13 Oct 2021 14:19:56 +0100
-Subject: [PATCH] nvmem: core: add nvmem cell post processing callback
-
-Some NVMEM providers have certain nvmem cells encoded, which requires
-post processing before actually using it.
-
-For example mac-address is stored in either in ascii or delimited or reverse-order.
-
-Having a post-process callback hook to provider drivers would enable them to
-do this vendor specific post processing before nvmem consumers see it.
-
-Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20211013131957.30271-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 9 +++++++++
- include/linux/nvmem-provider.h | 5 +++++
- 2 files changed, 14 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -38,6 +38,7 @@ struct nvmem_device {
- 	unsigned int		nkeepout;
- 	nvmem_reg_read_t	reg_read;
- 	nvmem_reg_write_t	reg_write;
-+	nvmem_cell_post_process_t cell_post_process;
- 	struct gpio_desc	*wp_gpio;
- 	void *priv;
- };
-@@ -799,6 +800,7 @@ struct nvmem_device *nvmem_register(cons
- 	nvmem->type = config->type;
- 	nvmem->reg_read = config->reg_read;
- 	nvmem->reg_write = config->reg_write;
-+	nvmem->cell_post_process = config->cell_post_process;
- 	nvmem->keepout = config->keepout;
- 	nvmem->nkeepout = config->nkeepout;
- 	if (config->of_node)
-@@ -1444,6 +1446,13 @@ static int __nvmem_cell_read(struct nvme
- 	if (cell->bit_offset || cell->nbits)
- 		nvmem_shift_read_buffer_in_place(cell, buf);
- 
-+	if (nvmem->cell_post_process) {
-+		rc = nvmem->cell_post_process(nvmem->priv, id,
-+					      cell->offset, buf, cell->bytes);
-+		if (rc)
-+			return rc;
-+	}
-+
- 	if (len)
- 		*len = cell->bytes;
- 
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -19,6 +19,9 @@ typedef int (*nvmem_reg_read_t)(void *pr
- 				void *val, size_t bytes);
- typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset,
- 				 void *val, size_t bytes);
-+/* used for vendor specific post processing of cell data */
-+typedef int (*nvmem_cell_post_process_t)(void *priv, const char *id, unsigned int offset,
-+					  void *buf, size_t bytes);
- 
- enum nvmem_type {
- 	NVMEM_TYPE_UNKNOWN = 0,
-@@ -62,6 +65,7 @@ struct nvmem_keepout {
-  * @no_of_node:	Device should not use the parent's of_node even if it's !NULL.
-  * @reg_read:	Callback to read data.
-  * @reg_write:	Callback to write data.
-+ * @cell_post_process:	Callback for vendor specific post processing of cell data
-  * @size:	Device size.
-  * @word_size:	Minimum read/write access granularity.
-  * @stride:	Minimum read/write access stride.
-@@ -92,6 +96,7 @@ struct nvmem_config {
- 	bool			no_of_node;
- 	nvmem_reg_read_t	reg_read;
- 	nvmem_reg_write_t	reg_write;
-+	nvmem_cell_post_process_t cell_post_process;
- 	int	size;
- 	int	word_size;
- 	int	stride;
diff --git a/target/linux/generic/backport-5.10/806-v5.16-0003-nvmem-imx-ocotp-add-support-for-post-processing.patch b/target/linux/generic/backport-5.10/806-v5.16-0003-nvmem-imx-ocotp-add-support-for-post-processing.patch
deleted file mode 100644
index ee19228270d1..000000000000
--- a/target/linux/generic/backport-5.10/806-v5.16-0003-nvmem-imx-ocotp-add-support-for-post-processing.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From d0221a780cbc99fec6c27a98dba2828dc5735c00 Mon Sep 17 00:00:00 2001
-From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Date: Wed, 13 Oct 2021 14:19:57 +0100
-Subject: [PATCH] nvmem: imx-ocotp: add support for post processing
-
-Add .cell_post_process callback for imx-ocotp to deal with MAC address,
-since MAC address need to be reversed byte for some i.MX SoCs.
-
-Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20211013131957.30271-4-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/imx-ocotp.c | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/drivers/nvmem/imx-ocotp.c
-+++ b/drivers/nvmem/imx-ocotp.c
-@@ -97,6 +97,7 @@ struct ocotp_params {
- 	unsigned int bank_address_words;
- 	void (*set_timing)(struct ocotp_priv *priv);
- 	struct ocotp_ctrl_reg ctrl;
-+	bool reverse_mac_address;
- };
- 
- static int imx_ocotp_wait_for_busy(struct ocotp_priv *priv, u32 flags)
-@@ -221,6 +222,25 @@ read_end:
- 	return ret;
- }
- 
-+static int imx_ocotp_cell_pp(void *context, const char *id, unsigned int offset,
-+			     void *data, size_t bytes)
-+{
-+	struct ocotp_priv *priv = context;
-+
-+	/* Deal with some post processing of nvmem cell data */
-+	if (id && !strcmp(id, "mac-address")) {
-+		if (priv->params->reverse_mac_address) {
-+			u8 *buf = data;
-+			int i;
-+
-+			for (i = 0; i < bytes/2; i++)
-+				swap(buf[i], buf[bytes - i - 1]);
-+		}
-+	}
-+
-+	return 0;
-+}
-+
- static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
- {
- 	unsigned long clk_rate;
-@@ -468,6 +488,7 @@ static struct nvmem_config imx_ocotp_nvm
- 	.stride = 1,
- 	.reg_read = imx_ocotp_read,
- 	.reg_write = imx_ocotp_write,
-+	.cell_post_process = imx_ocotp_cell_pp,
- };
- 
- static const struct ocotp_params imx6q_params = {
-@@ -530,6 +551,7 @@ static const struct ocotp_params imx8mq_
- 	.bank_address_words = 0,
- 	.set_timing = imx_ocotp_set_imx6_timing,
- 	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
-+	.reverse_mac_address = true,
- };
- 
- static const struct ocotp_params imx8mm_params = {
-@@ -537,6 +559,7 @@ static const struct ocotp_params imx8mm_
- 	.bank_address_words = 0,
- 	.set_timing = imx_ocotp_set_imx6_timing,
- 	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
-+	.reverse_mac_address = true,
- };
- 
- static const struct ocotp_params imx8mn_params = {
-@@ -544,6 +567,7 @@ static const struct ocotp_params imx8mn_
- 	.bank_address_words = 0,
- 	.set_timing = imx_ocotp_set_imx6_timing,
- 	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
-+	.reverse_mac_address = true,
- };
- 
- static const struct ocotp_params imx8mp_params = {
-@@ -551,6 +575,7 @@ static const struct ocotp_params imx8mp_
- 	.bank_address_words = 0,
- 	.set_timing = imx_ocotp_set_imx6_timing,
- 	.ctrl = IMX_OCOTP_BM_CTRL_8MP,
-+	.reverse_mac_address = true,
- };
- 
- static const struct of_device_id imx_ocotp_dt_ids[] = {
diff --git a/target/linux/generic/backport-5.10/807-v5.17-0002-nvmem-mtk-efuse-support-minimum-one-byte-access-stri.patch b/target/linux/generic/backport-5.10/807-v5.17-0002-nvmem-mtk-efuse-support-minimum-one-byte-access-stri.patch
deleted file mode 100644
index 785bfe53f547..000000000000
--- a/target/linux/generic/backport-5.10/807-v5.17-0002-nvmem-mtk-efuse-support-minimum-one-byte-access-stri.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 98e2c4efae214fb7086cac9117616eb6ea11475d Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Thu, 9 Dec 2021 17:42:34 +0000
-Subject: [PATCH] nvmem: mtk-efuse: support minimum one byte access stride and
- granularity
-
-In order to support nvmem bits property, should support minimum 1 byte
-read stride and minimum 1 byte read granularity at the same time.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20211209174235.14049-4-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/mtk-efuse.c | 13 +++++++------
- 1 file changed, 7 insertions(+), 6 deletions(-)
-
---- a/drivers/nvmem/mtk-efuse.c
-+++ b/drivers/nvmem/mtk-efuse.c
-@@ -19,11 +19,12 @@ static int mtk_reg_read(void *context,
- 			unsigned int reg, void *_val, size_t bytes)
- {
- 	struct mtk_efuse_priv *priv = context;
--	u32 *val = _val;
--	int i = 0, words = bytes / 4;
-+	void __iomem *addr = priv->base + reg;
-+	u8 *val = _val;
-+	int i;
- 
--	while (words--)
--		*val++ = readl(priv->base + reg + (i++ * 4));
-+	for (i = 0; i < bytes; i++, val++)
-+		*val = readb(addr + i);
- 
- 	return 0;
- }
-@@ -45,8 +46,8 @@ static int mtk_efuse_probe(struct platfo
- 	if (IS_ERR(priv->base))
- 		return PTR_ERR(priv->base);
- 
--	econfig.stride = 4;
--	econfig.word_size = 4;
-+	econfig.stride = 1;
-+	econfig.word_size = 1;
- 	econfig.reg_read = mtk_reg_read;
- 	econfig.size = resource_size(res);
- 	econfig.priv = priv;
diff --git a/target/linux/generic/backport-5.10/808-v5.18-0001-nvmem-core-Remove-unused-devm_nvmem_unregister.patch b/target/linux/generic/backport-5.10/808-v5.18-0001-nvmem-core-Remove-unused-devm_nvmem_unregister.patch
deleted file mode 100644
index 3fc5393fa943..000000000000
--- a/target/linux/generic/backport-5.10/808-v5.18-0001-nvmem-core-Remove-unused-devm_nvmem_unregister.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 190fae468592bc2f0efc8b928920f8f712b5831e Mon Sep 17 00:00:00 2001
-From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Date: Sun, 20 Feb 2022 15:15:15 +0000
-Subject: [PATCH] nvmem: core: Remove unused devm_nvmem_unregister()
-
-There are no users and seems no will come of the devm_nvmem_unregister().
-Remove the function and remove the unused devm_nvmem_match() along with it.
-
-Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220220151527.17216-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 22 ----------------------
- include/linux/nvmem-provider.h |  8 --------
- 2 files changed, 30 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -946,28 +946,6 @@ struct nvmem_device *devm_nvmem_register
- }
- EXPORT_SYMBOL_GPL(devm_nvmem_register);
- 
--static int devm_nvmem_match(struct device *dev, void *res, void *data)
--{
--	struct nvmem_device **r = res;
--
--	return *r == data;
--}
--
--/**
-- * devm_nvmem_unregister() - Unregister previously registered managed nvmem
-- * device.
-- *
-- * @dev: Device that uses the nvmem device.
-- * @nvmem: Pointer to previously registered nvmem device.
-- *
-- * Return: Will be negative on error or zero on success.
-- */
--int devm_nvmem_unregister(struct device *dev, struct nvmem_device *nvmem)
--{
--	return devres_release(dev, devm_nvmem_release, devm_nvmem_match, nvmem);
--}
--EXPORT_SYMBOL(devm_nvmem_unregister);
--
- static struct nvmem_device *__nvmem_device_get(void *data,
- 			int (*match)(struct device *dev, const void *data))
- {
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -133,8 +133,6 @@ void nvmem_unregister(struct nvmem_devic
- struct nvmem_device *devm_nvmem_register(struct device *dev,
- 					 const struct nvmem_config *cfg);
- 
--int devm_nvmem_unregister(struct device *dev, struct nvmem_device *nvmem);
--
- void nvmem_add_cell_table(struct nvmem_cell_table *table);
- void nvmem_del_cell_table(struct nvmem_cell_table *table);
- 
-@@ -153,12 +151,6 @@ devm_nvmem_register(struct device *dev,
- 	return nvmem_register(c);
- }
- 
--static inline int
--devm_nvmem_unregister(struct device *dev, struct nvmem_device *nvmem)
--{
--	return -EOPNOTSUPP;
--}
--
- static inline void nvmem_add_cell_table(struct nvmem_cell_table *table) {}
- static inline void nvmem_del_cell_table(struct nvmem_cell_table *table) {}
- 
diff --git a/target/linux/generic/backport-5.10/808-v5.18-0002-nvmem-core-Use-devm_add_action_or_reset.patch b/target/linux/generic/backport-5.10/808-v5.18-0002-nvmem-core-Use-devm_add_action_or_reset.patch
deleted file mode 100644
index 39c05258324c..000000000000
--- a/target/linux/generic/backport-5.10/808-v5.18-0002-nvmem-core-Use-devm_add_action_or_reset.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 5825b2c6762611e67ccaf3ccf64485365a120f0b Mon Sep 17 00:00:00 2001
-From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Date: Sun, 20 Feb 2022 15:15:16 +0000
-Subject: [PATCH] nvmem: core: Use devm_add_action_or_reset()
-
-Slightly simplify the devm_nvmem_register() by using the
-devm_add_action_or_reset().
-
-Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220220151527.17216-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 22 +++++++++-------------
- 1 file changed, 9 insertions(+), 13 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -908,9 +908,9 @@ void nvmem_unregister(struct nvmem_devic
- }
- EXPORT_SYMBOL_GPL(nvmem_unregister);
- 
--static void devm_nvmem_release(struct device *dev, void *res)
-+static void devm_nvmem_unregister(void *nvmem)
- {
--	nvmem_unregister(*(struct nvmem_device **)res);
-+	nvmem_unregister(nvmem);
- }
- 
- /**
-@@ -927,20 +927,16 @@ static void devm_nvmem_release(struct de
- struct nvmem_device *devm_nvmem_register(struct device *dev,
- 					 const struct nvmem_config *config)
- {
--	struct nvmem_device **ptr, *nvmem;
--
--	ptr = devres_alloc(devm_nvmem_release, sizeof(*ptr), GFP_KERNEL);
--	if (!ptr)
--		return ERR_PTR(-ENOMEM);
-+	struct nvmem_device *nvmem;
-+	int ret;
- 
- 	nvmem = nvmem_register(config);
-+	if (IS_ERR(nvmem))
-+		return nvmem;
- 
--	if (!IS_ERR(nvmem)) {
--		*ptr = nvmem;
--		devres_add(dev, ptr);
--	} else {
--		devres_free(ptr);
--	}
-+	ret = devm_add_action_or_reset(dev, devm_nvmem_unregister, nvmem);
-+	if (ret)
-+		return ERR_PTR(ret);
- 
- 	return nvmem;
- }
diff --git a/target/linux/generic/backport-5.10/808-v5.18-0003-nvmem-core-Check-input-parameter-for-NULL-in-nvmem_u.patch b/target/linux/generic/backport-5.10/808-v5.18-0003-nvmem-core-Check-input-parameter-for-NULL-in-nvmem_u.patch
deleted file mode 100644
index 01170d3d099d..000000000000
--- a/target/linux/generic/backport-5.10/808-v5.18-0003-nvmem-core-Check-input-parameter-for-NULL-in-nvmem_u.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 8c751e0d9a5264376935a84429a2d468c8877d99 Mon Sep 17 00:00:00 2001
-From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Date: Sun, 20 Feb 2022 15:15:17 +0000
-Subject: [PATCH] nvmem: core: Check input parameter for NULL in
- nvmem_unregister()
-
-nvmem_unregister() frees resources and standard pattern is to allow
-caller to not care if it's NULL or not. This will reduce burden on
-the callers to perform this check.
-
-Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220220151527.17216-4-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -904,7 +904,8 @@ static void nvmem_device_release(struct
-  */
- void nvmem_unregister(struct nvmem_device *nvmem)
- {
--	kref_put(&nvmem->refcnt, nvmem_device_release);
-+	if (nvmem)
-+		kref_put(&nvmem->refcnt, nvmem_device_release);
- }
- EXPORT_SYMBOL_GPL(nvmem_unregister);
- 
diff --git a/target/linux/generic/backport-5.10/808-v5.18-0004-nvmem-qfprom-fix-kerneldoc-warning.patch b/target/linux/generic/backport-5.10/808-v5.18-0004-nvmem-qfprom-fix-kerneldoc-warning.patch
deleted file mode 100644
index c98f8e9d545e..000000000000
--- a/target/linux/generic/backport-5.10/808-v5.18-0004-nvmem-qfprom-fix-kerneldoc-warning.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 05196facc052385960028ac634447ecf6c764ec3 Mon Sep 17 00:00:00 2001
-From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Date: Sun, 20 Feb 2022 15:15:18 +0000
-Subject: [PATCH] nvmem: qfprom: fix kerneldoc warning
-
-This patch fixes below kernel doc warning,
-warning: expecting prototype for qfprom_efuse_reg_write().
-Prototype was for qfprom_reg_write() instead
-
-No code changes.
-
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220220151527.17216-5-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qfprom.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/qfprom.c
-+++ b/drivers/nvmem/qfprom.c
-@@ -244,7 +244,7 @@ err_clk_prepared:
- }
- 
- /**
-- * qfprom_efuse_reg_write() - Write to fuses.
-+ * qfprom_reg_write() - Write to fuses.
-  * @context: Our driver data.
-  * @reg:     The offset to write at.
-  * @_val:    Pointer to data to write.
diff --git a/target/linux/generic/backport-5.10/808-v5.18-0005-nvmem-sunxi_sid-Add-support-for-D1-variant.patch b/target/linux/generic/backport-5.10/808-v5.18-0005-nvmem-sunxi_sid-Add-support-for-D1-variant.patch
deleted file mode 100644
index 6aad6af0800c..000000000000
--- a/target/linux/generic/backport-5.10/808-v5.18-0005-nvmem-sunxi_sid-Add-support-for-D1-variant.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 07ae4fde9efada7878e1383d6ccc7da70315ca23 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sun, 20 Feb 2022 15:15:20 +0000
-Subject: [PATCH] nvmem: sunxi_sid: Add support for D1 variant
-
-D1 has a smaller eFuse block than some other recent SoCs, and it no
-longer requires a workaround to read the eFuse data.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220220151527.17216-7-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/sunxi_sid.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/nvmem/sunxi_sid.c
-+++ b/drivers/nvmem/sunxi_sid.c
-@@ -184,6 +184,11 @@ static const struct sunxi_sid_cfg sun8i_
- 	.need_register_readout = true,
- };
- 
-+static const struct sunxi_sid_cfg sun20i_d1_cfg = {
-+	.value_offset = 0x200,
-+	.size = 0x100,
-+};
-+
- static const struct sunxi_sid_cfg sun50i_a64_cfg = {
- 	.value_offset = 0x200,
- 	.size = 0x100,
-@@ -200,6 +205,7 @@ static const struct of_device_id sunxi_s
- 	{ .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg },
- 	{ .compatible = "allwinner,sun8i-a83t-sid", .data = &sun50i_a64_cfg },
- 	{ .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg },
-+	{ .compatible = "allwinner,sun20i-d1-sid", .data = &sun20i_d1_cfg },
- 	{ .compatible = "allwinner,sun50i-a64-sid", .data = &sun50i_a64_cfg },
- 	{ .compatible = "allwinner,sun50i-h5-sid", .data = &sun50i_a64_cfg },
- 	{ .compatible = "allwinner,sun50i-h6-sid", .data = &sun50i_h6_cfg },
diff --git a/target/linux/generic/backport-5.10/808-v5.18-0006-nvmem-meson-mx-efuse-replace-unnecessary-devm_kstrdu.patch b/target/linux/generic/backport-5.10/808-v5.18-0006-nvmem-meson-mx-efuse-replace-unnecessary-devm_kstrdu.patch
deleted file mode 100644
index a73b42c5de3c..000000000000
--- a/target/linux/generic/backport-5.10/808-v5.18-0006-nvmem-meson-mx-efuse-replace-unnecessary-devm_kstrdu.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 4dc8d89faed9bb05f116fa1794fc955b14910386 Mon Sep 17 00:00:00 2001
-From: Xiaoke Wang <xkernel.wang@foxmail.com>
-Date: Sun, 20 Feb 2022 15:15:21 +0000
-Subject: [PATCH] nvmem: meson-mx-efuse: replace unnecessary devm_kstrdup()
-
-Replace unnecessary devm_kstrdup() so to avoid redundant memory allocation.
-
-Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220220151527.17216-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/meson-mx-efuse.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/nvmem/meson-mx-efuse.c
-+++ b/drivers/nvmem/meson-mx-efuse.c
-@@ -209,8 +209,7 @@ static int meson_mx_efuse_probe(struct p
- 	if (IS_ERR(efuse->base))
- 		return PTR_ERR(efuse->base);
- 
--	efuse->config.name = devm_kstrdup(&pdev->dev, drvdata->name,
--					  GFP_KERNEL);
-+	efuse->config.name = drvdata->name;
- 	efuse->config.owner = THIS_MODULE;
- 	efuse->config.dev = &pdev->dev;
- 	efuse->config.priv = efuse;
diff --git a/target/linux/generic/backport-5.10/808-v5.18-0007-nvmem-add-driver-for-Layerscape-SFP-Security-Fuse-Pr.patch b/target/linux/generic/backport-5.10/808-v5.18-0007-nvmem-add-driver-for-Layerscape-SFP-Security-Fuse-Pr.patch
deleted file mode 100644
index 6afb68b3f91b..000000000000
--- a/target/linux/generic/backport-5.10/808-v5.18-0007-nvmem-add-driver-for-Layerscape-SFP-Security-Fuse-Pr.patch
+++ /dev/null
@@ -1,139 +0,0 @@
-From f78451012b9e159afdba31c3eb69f223a9f42adc Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Sun, 20 Feb 2022 15:15:23 +0000
-Subject: [PATCH] nvmem: add driver for Layerscape SFP (Security Fuse
- Processor)
-
-Add support for the Security Fuse Processor found on Layerscape SoCs.
-This driver implements basic read access.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220220151527.17216-10-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig          | 12 +++++
- drivers/nvmem/Makefile         |  2 +
- drivers/nvmem/layerscape-sfp.c | 89 ++++++++++++++++++++++++++++++++++
- 3 files changed, 103 insertions(+)
- create mode 100644 drivers/nvmem/layerscape-sfp.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -300,4 +300,16 @@ config NVMEM_BRCM_NVRAM
- 	  This driver provides support for Broadcom's NVRAM that can be accessed
- 	  using I/O mapping.
- 
-+config NVMEM_LAYERSCAPE_SFP
-+	tristate "Layerscape SFP (Security Fuse Processor) support"
-+	depends on ARCH_LAYERSCAPE || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	help
-+	  This driver provides support to read the eFuses on Freescale
-+	  Layerscape SoC's. For example, the vendor provides a per part
-+	  unique ID there.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called layerscape-sfp.
-+
- endif
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -61,3 +61,5 @@ obj-$(CONFIG_NVMEM_RMEM) 	+= nvmem-rmem.
- nvmem-rmem-y			:= rmem.o
- obj-$(CONFIG_NVMEM_BRCM_NVRAM)	+= nvmem_brcm_nvram.o
- nvmem_brcm_nvram-y		:= brcm_nvram.o
-+obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP)	+= nvmem-layerscape-sfp.o
-+nvmem-layerscape-sfp-y		:= layerscape-sfp.o
---- /dev/null
-+++ b/drivers/nvmem/layerscape-sfp.c
-@@ -0,0 +1,89 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Layerscape SFP driver
-+ *
-+ * Copyright (c) 2022 Michael Walle <michael@walle.cc>
-+ *
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/platform_device.h>
-+#include <linux/property.h>
-+
-+#define LAYERSCAPE_SFP_OTP_OFFSET	0x0200
-+
-+struct layerscape_sfp_priv {
-+	void __iomem *base;
-+};
-+
-+struct layerscape_sfp_data {
-+	int size;
-+};
-+
-+static int layerscape_sfp_read(void *context, unsigned int offset, void *val,
-+			       size_t bytes)
-+{
-+	struct layerscape_sfp_priv *priv = context;
-+
-+	memcpy_fromio(val, priv->base + LAYERSCAPE_SFP_OTP_OFFSET + offset,
-+		      bytes);
-+
-+	return 0;
-+}
-+
-+static struct nvmem_config layerscape_sfp_nvmem_config = {
-+	.name = "fsl-sfp",
-+	.reg_read = layerscape_sfp_read,
-+};
-+
-+static int layerscape_sfp_probe(struct platform_device *pdev)
-+{
-+	const struct layerscape_sfp_data *data;
-+	struct layerscape_sfp_priv *priv;
-+	struct nvmem_device *nvmem;
-+
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(priv->base))
-+		return PTR_ERR(priv->base);
-+
-+	data = device_get_match_data(&pdev->dev);
-+
-+	layerscape_sfp_nvmem_config.size = data->size;
-+	layerscape_sfp_nvmem_config.dev = &pdev->dev;
-+	layerscape_sfp_nvmem_config.priv = priv;
-+
-+	nvmem = devm_nvmem_register(&pdev->dev, &layerscape_sfp_nvmem_config);
-+
-+	return PTR_ERR_OR_ZERO(nvmem);
-+}
-+
-+static const struct layerscape_sfp_data ls1028a_data = {
-+	.size = 0x88,
-+};
-+
-+static const struct of_device_id layerscape_sfp_dt_ids[] = {
-+	{ .compatible = "fsl,ls1028a-sfp", .data = &ls1028a_data },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, layerscape_sfp_dt_ids);
-+
-+static struct platform_driver layerscape_sfp_driver = {
-+	.probe	= layerscape_sfp_probe,
-+	.driver = {
-+		.name	= "layerscape_sfp",
-+		.of_match_table = layerscape_sfp_dt_ids,
-+	},
-+};
-+module_platform_driver(layerscape_sfp_driver);
-+
-+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
-+MODULE_DESCRIPTION("Layerscape Security Fuse Processor driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-5.10/808-v5.18-0008-nvmem-qfprom-Increase-fuse-blow-timeout-to-prevent-w.patch b/target/linux/generic/backport-5.10/808-v5.18-0008-nvmem-qfprom-Increase-fuse-blow-timeout-to-prevent-w.patch
deleted file mode 100644
index 74bd4a7eb676..000000000000
--- a/target/linux/generic/backport-5.10/808-v5.18-0008-nvmem-qfprom-Increase-fuse-blow-timeout-to-prevent-w.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From bc5c75e0a5a9400f81a987cc720100ac475fa4d8 Mon Sep 17 00:00:00 2001
-From: Knox Chiou <knoxchiou@chromium.org>
-Date: Wed, 23 Feb 2022 22:35:00 +0000
-Subject: [PATCH] nvmem: qfprom: Increase fuse blow timeout to prevent write
- fail
-
-sc7180 blow fuses got slightly chances to hit qfprom_reg_write timeout.
-Current timeout is simply too low. Since blowing fuses is a
-very rare operation, so the risk associated with overestimating this
-number is low.
-Increase fuse blow timeout from 1ms to 10ms.
-
-Reviewed-by: Douglas Anderson <dianders@chromium.org>
-Signed-off-by: Knox Chiou <knoxchiou@chromium.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220223223502.29454-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qfprom.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/qfprom.c
-+++ b/drivers/nvmem/qfprom.c
-@@ -22,7 +22,7 @@
- 
- /* Amount of time required to hold charge to blow fuse in micro-seconds */
- #define QFPROM_FUSE_BLOW_POLL_US	100
--#define QFPROM_FUSE_BLOW_TIMEOUT_US	1000
-+#define QFPROM_FUSE_BLOW_TIMEOUT_US	10000
- 
- #define QFPROM_BLOW_STATUS_OFFSET	0x048
- #define QFPROM_BLOW_STATUS_BUSY		0x1
diff --git a/target/linux/generic/backport-5.10/808-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch b/target/linux/generic/backport-5.10/808-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch
deleted file mode 100644
index 9520140a6735..000000000000
--- a/target/linux/generic/backport-5.10/808-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch
+++ /dev/null
@@ -1,277 +0,0 @@
-From 8747ec2e9762ed9ae53b3a590938f454b6a1abdf Mon Sep 17 00:00:00 2001
-From: Vincent Shih <vincent.sunplus@gmail.com>
-Date: Wed, 23 Feb 2022 22:35:01 +0000
-Subject: [PATCH] nvmem: Add driver for OCOTP in Sunplus SP7021
-
-Add driver for OCOTP in Sunplus SP7021
-
-Signed-off-by: Vincent Shih <vincent.sunplus@gmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220223223502.29454-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- MAINTAINERS                   |   5 +
- drivers/nvmem/Kconfig         |  12 ++
- drivers/nvmem/Makefile        |   2 +
- drivers/nvmem/sunplus-ocotp.c | 228 ++++++++++++++++++++++++++++++++++
- 4 files changed, 247 insertions(+)
- create mode 100644 drivers/nvmem/sunplus-ocotp.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -312,4 +312,16 @@ config NVMEM_LAYERSCAPE_SFP
- 	  This driver can also be built as a module. If so, the module
- 	  will be called layerscape-sfp.
- 
-+config NVMEM_SUNPLUS_OCOTP
-+	tristate "Sunplus SoC OTP support"
-+	depends on SOC_SP7021 || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	help
-+	  This is a driver for the On-chip OTP controller (OCOTP) available
-+	  on Sunplus SoCs. It provides access to 128 bytes of one-time
-+	  programmable eFuse.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called nvmem-sunplus-ocotp.
-+
- endif
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -63,3 +63,5 @@ obj-$(CONFIG_NVMEM_BRCM_NVRAM)	+= nvmem_
- nvmem_brcm_nvram-y		:= brcm_nvram.o
- obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP)	+= nvmem-layerscape-sfp.o
- nvmem-layerscape-sfp-y		:= layerscape-sfp.o
-+obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP)	+= nvmem_sunplus_ocotp.o
-+nvmem_sunplus_ocotp-y		:= sunplus-ocotp.o
---- /dev/null
-+++ b/drivers/nvmem/sunplus-ocotp.c
-@@ -0,0 +1,228 @@
-+// SPDX-License-Identifier: GPL-2.0
-+
-+/*
-+ * The OCOTP driver for Sunplus	SP7021
-+ *
-+ * Copyright (C) 2019 Sunplus Technology Inc., All rights reserved.
-+ */
-+
-+#include <linux/bitfield.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/iopoll.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+/*
-+ * OTP memory
-+ * Each bank contains 4 words (32 bits).
-+ * Bank 0 starts at offset 0 from the base.
-+ */
-+
-+#define OTP_WORDS_PER_BANK		4
-+#define OTP_WORD_SIZE			sizeof(u32)
-+#define OTP_BIT_ADDR_OF_BANK		(8 * OTP_WORD_SIZE * OTP_WORDS_PER_BANK)
-+#define QAC628_OTP_NUM_BANKS		8
-+#define QAC628_OTP_SIZE			(QAC628_OTP_NUM_BANKS * OTP_WORDS_PER_BANK * OTP_WORD_SIZE)
-+#define OTP_READ_TIMEOUT_US		200000
-+
-+/* HB_GPIO */
-+#define ADDRESS_8_DATA			0x20
-+
-+/* OTP_RX */
-+#define OTP_CONTROL_2			0x48
-+#define OTP_RD_PERIOD			GENMASK(15, 8)
-+#define OTP_RD_PERIOD_MASK		~GENMASK(15, 8)
-+#define CPU_CLOCK			FIELD_PREP(OTP_RD_PERIOD, 30)
-+#define SEL_BAK_KEY2			BIT(5)
-+#define SEL_BAK_KEY2_MASK		~BIT(5)
-+#define SW_TRIM_EN			BIT(4)
-+#define SW_TRIM_EN_MASK			~BIT(4)
-+#define SEL_BAK_KEY			BIT(3)
-+#define SEL_BAK_KEY_MASK		~BIT(3)
-+#define OTP_READ			BIT(2)
-+#define OTP_LOAD_SECURE_DATA		BIT(1)
-+#define OTP_LOAD_SECURE_DATA_MASK	~BIT(1)
-+#define OTP_DO_CRC			BIT(0)
-+#define OTP_DO_CRC_MASK			~BIT(0)
-+#define OTP_STATUS			0x4c
-+#define OTP_READ_DONE			BIT(4)
-+#define OTP_READ_DONE_MASK		~BIT(4)
-+#define OTP_LOAD_SECURE_DONE_MASK	~BIT(2)
-+#define OTP_READ_ADDRESS		0x50
-+
-+enum base_type {
-+	HB_GPIO,
-+	OTPRX,
-+	BASEMAX,
-+};
-+
-+struct sp_ocotp_priv {
-+	struct device *dev;
-+	void __iomem *base[BASEMAX];
-+	struct clk *clk;
-+};
-+
-+struct sp_ocotp_data {
-+	int size;
-+};
-+
-+const struct sp_ocotp_data  sp_otp_v0 = {
-+	.size = QAC628_OTP_SIZE,
-+};
-+
-+static int sp_otp_read_real(struct sp_ocotp_priv *otp, int addr, char *value)
-+{
-+	unsigned int addr_data;
-+	unsigned int byte_shift;
-+	unsigned int status;
-+	int ret;
-+
-+	addr_data = addr % (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
-+	addr_data = addr_data / OTP_WORD_SIZE;
-+
-+	byte_shift = addr % (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
-+	byte_shift = byte_shift % OTP_WORD_SIZE;
-+
-+	addr = addr / (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
-+	addr = addr * OTP_BIT_ADDR_OF_BANK;
-+
-+	writel(readl(otp->base[OTPRX] + OTP_STATUS) & OTP_READ_DONE_MASK &
-+	       OTP_LOAD_SECURE_DONE_MASK, otp->base[OTPRX] + OTP_STATUS);
-+	writel(addr, otp->base[OTPRX] + OTP_READ_ADDRESS);
-+	writel(readl(otp->base[OTPRX] + OTP_CONTROL_2) | OTP_READ,
-+	       otp->base[OTPRX] + OTP_CONTROL_2);
-+	writel(readl(otp->base[OTPRX] + OTP_CONTROL_2) & SEL_BAK_KEY2_MASK & SW_TRIM_EN_MASK
-+	       & SEL_BAK_KEY_MASK & OTP_LOAD_SECURE_DATA_MASK & OTP_DO_CRC_MASK,
-+	       otp->base[OTPRX] + OTP_CONTROL_2);
-+	writel((readl(otp->base[OTPRX] + OTP_CONTROL_2) & OTP_RD_PERIOD_MASK) | CPU_CLOCK,
-+	       otp->base[OTPRX] + OTP_CONTROL_2);
-+
-+	ret = readl_poll_timeout(otp->base[OTPRX] + OTP_STATUS, status,
-+				 status & OTP_READ_DONE, 10, OTP_READ_TIMEOUT_US);
-+
-+	if (ret < 0)
-+		return ret;
-+
-+	*value = (readl(otp->base[HB_GPIO] + ADDRESS_8_DATA + addr_data * OTP_WORD_SIZE)
-+		  >> (8 * byte_shift)) & 0xff;
-+
-+	return ret;
-+}
-+
-+static int sp_ocotp_read(void *priv, unsigned int offset, void *value, size_t bytes)
-+{
-+	struct sp_ocotp_priv *otp = priv;
-+	unsigned int addr;
-+	char *buf = value;
-+	char val[4];
-+	int ret;
-+
-+	ret = clk_enable(otp->clk);
-+	if (ret)
-+		return ret;
-+
-+	*buf = 0;
-+	for (addr = offset; addr < (offset + bytes); addr++) {
-+		ret = sp_otp_read_real(otp, addr, val);
-+		if (ret < 0) {
-+			dev_err(otp->dev, "OTP read fail:%d at %d", ret, addr);
-+			goto disable_clk;
-+		}
-+
-+		*buf++ = *val;
-+	}
-+
-+disable_clk:
-+	clk_disable(otp->clk);
-+
-+	return ret;
-+}
-+
-+static struct nvmem_config sp_ocotp_nvmem_config = {
-+	.name = "sp-ocotp",
-+	.read_only = true,
-+	.word_size = 1,
-+	.size = QAC628_OTP_SIZE,
-+	.stride = 1,
-+	.reg_read = sp_ocotp_read,
-+	.owner = THIS_MODULE,
-+};
-+
-+static int sp_ocotp_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct nvmem_device *nvmem;
-+	struct sp_ocotp_priv *otp;
-+	struct resource *res;
-+	int ret;
-+
-+	otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL);
-+	if (!otp)
-+		return -ENOMEM;
-+
-+	otp->dev = dev;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hb_gpio");
-+	otp->base[HB_GPIO] = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(otp->base[HB_GPIO]))
-+		return PTR_ERR(otp->base[HB_GPIO]);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otprx");
-+	otp->base[OTPRX] = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(otp->base[OTPRX]))
-+		return PTR_ERR(otp->base[OTPRX]);
-+
-+	otp->clk = devm_clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(otp->clk))
-+		return dev_err_probe(&pdev->dev, PTR_ERR(otp->clk),
-+						"devm_clk_get fail\n");
-+
-+	ret = clk_prepare(otp->clk);
-+	if (ret < 0) {
-+		dev_err(dev, "failed to prepare clk: %d\n", ret);
-+		return ret;
-+	}
-+
-+	sp_ocotp_nvmem_config.priv = otp;
-+	sp_ocotp_nvmem_config.dev = dev;
-+
-+	nvmem = devm_nvmem_register(dev, &sp_ocotp_nvmem_config);
-+	if (IS_ERR(nvmem))
-+		return dev_err_probe(&pdev->dev, PTR_ERR(nvmem),
-+						"register nvmem device fail\n");
-+
-+	platform_set_drvdata(pdev, nvmem);
-+
-+	dev_dbg(dev, "banks:%d x wpb:%d x wsize:%d = %d",
-+		(int)QAC628_OTP_NUM_BANKS, (int)OTP_WORDS_PER_BANK,
-+		(int)OTP_WORD_SIZE, (int)QAC628_OTP_SIZE);
-+
-+	dev_info(dev, "by Sunplus (C) 2020");
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id sp_ocotp_dt_ids[] = {
-+	{ .compatible = "sunplus,sp7021-ocotp", .data = &sp_otp_v0 },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, sp_ocotp_dt_ids);
-+
-+static struct platform_driver sp_otp_driver = {
-+	.probe     = sp_ocotp_probe,
-+	.driver    = {
-+		.name           = "sunplus,sp7021-ocotp",
-+		.of_match_table = sp_ocotp_dt_ids,
-+	}
-+};
-+module_platform_driver(sp_otp_driver);
-+
-+MODULE_AUTHOR("Vincent Shih <vincent.sunplus@gmail.com>");
-+MODULE_DESCRIPTION("Sunplus On-Chip OTP driver");
-+MODULE_LICENSE("GPL");
-+
diff --git a/target/linux/generic/backport-5.10/808-v5.18-0010-nvmem-brcm_nvram-parse-NVRAM-content-into-NVMEM-cell.patch b/target/linux/generic/backport-5.10/808-v5.18-0010-nvmem-brcm_nvram-parse-NVRAM-content-into-NVMEM-cell.patch
deleted file mode 100644
index 99781b3a7b3a..000000000000
--- a/target/linux/generic/backport-5.10/808-v5.18-0010-nvmem-brcm_nvram-parse-NVRAM-content-into-NVMEM-cell.patch
+++ /dev/null
@@ -1,146 +0,0 @@
-From 6e977eaa8280e957b87904b536661550f2a6b3e8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 25 Feb 2022 17:58:20 +0000
-Subject: [PATCH] nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-NVRAM consist of header and NUL separated key-value pairs. Parse it and
-create NVMEM cell for every key-value entry.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220225175822.8293-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/brcm_nvram.c | 90 ++++++++++++++++++++++++++++++++++++++
- 1 file changed, 90 insertions(+)
-
---- a/drivers/nvmem/brcm_nvram.c
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -6,12 +6,26 @@
- #include <linux/io.h>
- #include <linux/mod_devicetable.h>
- #include <linux/module.h>
-+#include <linux/nvmem-consumer.h>
- #include <linux/nvmem-provider.h>
- #include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#define NVRAM_MAGIC			"FLSH"
- 
- struct brcm_nvram {
- 	struct device *dev;
- 	void __iomem *base;
-+	struct nvmem_cell_info *cells;
-+	int ncells;
-+};
-+
-+struct brcm_nvram_header {
-+	char magic[4];
-+	__le32 len;
-+	__le32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
-+	__le32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
-+	__le32 config_ncdl;	/* ncdl values for memc */
- };
- 
- static int brcm_nvram_read(void *context, unsigned int offset, void *val,
-@@ -26,6 +40,75 @@ static int brcm_nvram_read(void *context
- 	return 0;
- }
- 
-+static int brcm_nvram_add_cells(struct brcm_nvram *priv, uint8_t *data,
-+				size_t len)
-+{
-+	struct device *dev = priv->dev;
-+	char *var, *value, *eq;
-+	int idx;
-+
-+	priv->ncells = 0;
-+	for (var = data + sizeof(struct brcm_nvram_header);
-+	     var < (char *)data + len && *var;
-+	     var += strlen(var) + 1) {
-+		priv->ncells++;
-+	}
-+
-+	priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL);
-+	if (!priv->cells)
-+		return -ENOMEM;
-+
-+	for (var = data + sizeof(struct brcm_nvram_header), idx = 0;
-+	     var < (char *)data + len && *var;
-+	     var = value + strlen(value) + 1, idx++) {
-+		eq = strchr(var, '=');
-+		if (!eq)
-+			break;
-+		*eq = '\0';
-+		value = eq + 1;
-+
-+		priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL);
-+		if (!priv->cells[idx].name)
-+			return -ENOMEM;
-+		priv->cells[idx].offset = value - (char *)data;
-+		priv->cells[idx].bytes = strlen(value);
-+	}
-+
-+	return 0;
-+}
-+
-+static int brcm_nvram_parse(struct brcm_nvram *priv)
-+{
-+	struct device *dev = priv->dev;
-+	struct brcm_nvram_header header;
-+	uint8_t *data;
-+	size_t len;
-+	int err;
-+
-+	memcpy_fromio(&header, priv->base, sizeof(header));
-+
-+	if (memcmp(header.magic, NVRAM_MAGIC, 4)) {
-+		dev_err(dev, "Invalid NVRAM magic\n");
-+		return -EINVAL;
-+	}
-+
-+	len = le32_to_cpu(header.len);
-+
-+	data = kcalloc(1, len, GFP_KERNEL);
-+	memcpy_fromio(data, priv->base, len);
-+	data[len - 1] = '\0';
-+
-+	err = brcm_nvram_add_cells(priv, data, len);
-+	if (err) {
-+		dev_err(dev, "Failed to add cells: %d\n", err);
-+		return err;
-+	}
-+
-+	kfree(data);
-+
-+	return 0;
-+}
-+
- static int brcm_nvram_probe(struct platform_device *pdev)
- {
- 	struct nvmem_config config = {
-@@ -35,6 +118,7 @@ static int brcm_nvram_probe(struct platf
- 	struct device *dev = &pdev->dev;
- 	struct resource *res;
- 	struct brcm_nvram *priv;
-+	int err;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
-@@ -46,7 +130,13 @@ static int brcm_nvram_probe(struct platf
- 	if (IS_ERR(priv->base))
- 		return PTR_ERR(priv->base);
- 
-+	err = brcm_nvram_parse(priv);
-+	if (err)
-+		return err;
-+
- 	config.dev = dev;
-+	config.cells = priv->cells;
-+	config.ncells = priv->ncells;
- 	config.priv = priv;
- 	config.size = resource_size(res);
- 
diff --git a/target/linux/generic/backport-5.10/809-v5.19-0001-nvmem-bcm-ocotp-mark-ACPI-device-ID-table-as-maybe-u.patch b/target/linux/generic/backport-5.10/809-v5.19-0001-nvmem-bcm-ocotp-mark-ACPI-device-ID-table-as-maybe-u.patch
deleted file mode 100644
index ef3107db946c..000000000000
--- a/target/linux/generic/backport-5.10/809-v5.19-0001-nvmem-bcm-ocotp-mark-ACPI-device-ID-table-as-maybe-u.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 6bd0ffeaa389866089e9573b2298ae58d6359b75 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzk@kernel.org>
-Date: Mon, 21 Mar 2022 12:03:24 +0100
-Subject: [PATCH] nvmem: bcm-ocotp: mark ACPI device ID table as maybe unused
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-"bcm_otpc_acpi_ids" is used with ACPI_PTR, so a build with !CONFIG_ACPI
-has a warning:
-
-  drivers/nvmem/bcm-ocotp.c:247:36: error:
-    ‘bcm_otpc_acpi_ids’ defined but not used [-Werror=unused-const-variable=]
-
-Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
-Link: https://lore.kernel.org/r/20220321110326.44652-1-krzk@kernel.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/bcm-ocotp.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/bcm-ocotp.c
-+++ b/drivers/nvmem/bcm-ocotp.c
-@@ -244,7 +244,7 @@ static const struct of_device_id bcm_otp
- };
- MODULE_DEVICE_TABLE(of, bcm_otpc_dt_ids);
- 
--static const struct acpi_device_id bcm_otpc_acpi_ids[] = {
-+static const struct acpi_device_id bcm_otpc_acpi_ids[] __maybe_unused = {
- 	{ .id = "BRCM0700", .driver_data = (kernel_ulong_t)&otp_map },
- 	{ .id = "BRCM0701", .driver_data = (kernel_ulong_t)&otp_map_v2 },
- 	{ /* sentinel */ }
diff --git a/target/linux/generic/backport-5.10/809-v5.19-0002-nvmem-sunplus-ocotp-staticize-sp_otp_v0.patch b/target/linux/generic/backport-5.10/809-v5.19-0002-nvmem-sunplus-ocotp-staticize-sp_otp_v0.patch
deleted file mode 100644
index a84d2316f0cc..000000000000
--- a/target/linux/generic/backport-5.10/809-v5.19-0002-nvmem-sunplus-ocotp-staticize-sp_otp_v0.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 1066f8156351fcd997125257cea47cf805ba4f6d Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzk@kernel.org>
-Date: Mon, 21 Mar 2022 12:03:25 +0100
-Subject: [PATCH] nvmem: sunplus-ocotp: staticize sp_otp_v0
-
-The "sp_otp_v0" file scope variable is not used outside, so make it
-static to fix warning:
-
-  drivers/nvmem/sunplus-ocotp.c:74:29: sparse:
-    sparse: symbol 'sp_otp_v0' was not declared. Should it be static?
-
-Reported-by: kernel test robot <lkp@intel.com>
-Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
-Link: https://lore.kernel.org/r/20220321110326.44652-2-krzk@kernel.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/sunplus-ocotp.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/sunplus-ocotp.c
-+++ b/drivers/nvmem/sunplus-ocotp.c
-@@ -71,7 +71,7 @@ struct sp_ocotp_data {
- 	int size;
- };
- 
--const struct sp_ocotp_data  sp_otp_v0 = {
-+static const struct sp_ocotp_data sp_otp_v0 = {
- 	.size = QAC628_OTP_SIZE,
- };
- 
diff --git a/target/linux/generic/backport-5.10/809-v5.19-0003-nvmem-sunplus-ocotp-drop-useless-probe-confirmation.patch b/target/linux/generic/backport-5.10/809-v5.19-0003-nvmem-sunplus-ocotp-drop-useless-probe-confirmation.patch
deleted file mode 100644
index 886ebc12a9c9..000000000000
--- a/target/linux/generic/backport-5.10/809-v5.19-0003-nvmem-sunplus-ocotp-drop-useless-probe-confirmation.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 874dfbcf219ccc42a2cbd187d087c7db82c3024b Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzk@kernel.org>
-Date: Mon, 21 Mar 2022 12:03:26 +0100
-Subject: [PATCH] nvmem: sunplus-ocotp: drop useless probe confirmation
-
-Printing probe success is discouraged, because we can use tracing for
-this purpose.  Remove useless print message after Sunplus OCOTP driver
-probe.
-
-Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
-Link: https://lore.kernel.org/r/20220321110326.44652-3-krzk@kernel.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/sunplus-ocotp.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/nvmem/sunplus-ocotp.c
-+++ b/drivers/nvmem/sunplus-ocotp.c
-@@ -202,8 +202,6 @@ static int sp_ocotp_probe(struct platfor
- 		(int)QAC628_OTP_NUM_BANKS, (int)OTP_WORDS_PER_BANK,
- 		(int)OTP_WORD_SIZE, (int)QAC628_OTP_SIZE);
- 
--	dev_info(dev, "by Sunplus (C) 2020");
--
- 	return 0;
- }
- 
diff --git a/target/linux/generic/backport-5.10/809-v5.19-0004-nvmem-core-support-passing-DT-node-in-cell-info.patch b/target/linux/generic/backport-5.10/809-v5.19-0004-nvmem-core-support-passing-DT-node-in-cell-info.patch
deleted file mode 100644
index 3b1e76147a8b..000000000000
--- a/target/linux/generic/backport-5.10/809-v5.19-0004-nvmem-core-support-passing-DT-node-in-cell-info.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From dbc2f62061c6bfba0aee93161ee3194dcee84bd0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 29 Apr 2022 17:26:46 +0100
-Subject: [PATCH] nvmem: core: support passing DT node in cell info
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some hardware may have NVMEM cells described in Device Tree using
-individual nodes. Let drivers pass such nodes to the NVMEM subsystem so
-they can be later used by NVMEM consumers.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220429162701.2222-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 1 +
- include/linux/nvmem-consumer.h | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -467,6 +467,7 @@ static int nvmem_cell_info_to_nvmem_cell
- 
- 	cell->bit_offset = info->bit_offset;
- 	cell->nbits = info->nbits;
-+	cell->np = info->np;
- 
- 	if (cell->nbits)
- 		cell->bytes = DIV_ROUND_UP(cell->nbits + cell->bit_offset,
---- a/include/linux/nvmem-consumer.h
-+++ b/include/linux/nvmem-consumer.h
-@@ -25,6 +25,7 @@ struct nvmem_cell_info {
- 	unsigned int		bytes;
- 	unsigned int		bit_offset;
- 	unsigned int		nbits;
-+	struct device_node	*np;
- };
- 
- /**
diff --git a/target/linux/generic/backport-5.10/809-v5.19-0005-nvmem-brcm_nvram-find-Device-Tree-nodes-for-NVMEM-ce.patch b/target/linux/generic/backport-5.10/809-v5.19-0005-nvmem-brcm_nvram-find-Device-Tree-nodes-for-NVMEM-ce.patch
deleted file mode 100644
index a9eacd9419cb..000000000000
--- a/target/linux/generic/backport-5.10/809-v5.19-0005-nvmem-brcm_nvram-find-Device-Tree-nodes-for-NVMEM-ce.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 207775f7e17b8fd0426a2ac4a5b81e4e1d71849e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 29 Apr 2022 17:26:47 +0100
-Subject: [PATCH] nvmem: brcm_nvram: find Device Tree nodes for NVMEM cells
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-DT binding for Broadcom's NVRAM supports specifying NVMEM cells as NVMEM
-device (provider) subnodes. Look for such subnodes when collecing NVMEM
-cells. This allows NVMEM consumers to use NVRAM variables.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220429162701.2222-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/brcm_nvram.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/nvmem/brcm_nvram.c
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -8,6 +8,7 @@
- #include <linux/module.h>
- #include <linux/nvmem-consumer.h>
- #include <linux/nvmem-provider.h>
-+#include <linux/of.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- 
-@@ -72,6 +73,7 @@ static int brcm_nvram_add_cells(struct b
- 			return -ENOMEM;
- 		priv->cells[idx].offset = value - (char *)data;
- 		priv->cells[idx].bytes = strlen(value);
-+		priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
- 	}
- 
- 	return 0;
diff --git a/target/linux/generic/backport-5.10/809-v5.19-0006-nvmem-Add-Apple-eFuse-driver.patch b/target/linux/generic/backport-5.10/809-v5.19-0006-nvmem-Add-Apple-eFuse-driver.patch
deleted file mode 100644
index ebeb6f5ad394..000000000000
--- a/target/linux/generic/backport-5.10/809-v5.19-0006-nvmem-Add-Apple-eFuse-driver.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From b6b7ef932ae838209254f016ecf8862d716a5ced Mon Sep 17 00:00:00 2001
-From: Sven Peter <sven@svenpeter.dev>
-Date: Fri, 29 Apr 2022 17:26:50 +0100
-Subject: [PATCH] nvmem: Add Apple eFuse driver
-
-Apple SoCs contain eFuses used to store factory-programmed data such
-as calibration values for the PCIe or the Type-C PHY. They are organized
-as 32bit values exposed as MMIO.
-
-Signed-off-by: Sven Peter <sven@svenpeter.dev>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220429162701.2222-6-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig        | 12 ++++++
- drivers/nvmem/Makefile       |  2 +
- drivers/nvmem/apple-efuses.c | 80 ++++++++++++++++++++++++++++++++++++
- 3 files changed, 94 insertions(+)
- create mode 100644 drivers/nvmem/apple-efuses.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -324,4 +324,16 @@ config NVMEM_SUNPLUS_OCOTP
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem-sunplus-ocotp.
- 
-+config NVMEM_APPLE_EFUSES
-+	tristate "Apple eFuse support"
-+	depends on ARCH_APPLE || COMPILE_TEST
-+	default ARCH_APPLE
-+	help
-+	  Say y here to enable support for reading eFuses on Apple SoCs
-+	  such as the M1. These are e.g. used to store factory programmed
-+	  calibration data required for the PCIe or the USB-C PHY.
-+
-+	  This driver can also be built as a module. If so, the module will
-+	  be called nvmem-apple-efuses.
-+
- endif
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -65,3 +65,5 @@ obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP)	+= nv
- nvmem-layerscape-sfp-y		:= layerscape-sfp.o
- obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP)	+= nvmem_sunplus_ocotp.o
- nvmem_sunplus_ocotp-y		:= sunplus-ocotp.o
-+obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvmem-apple-efuses.o
-+nvmem-apple-efuses-y 		:= apple-efuses.o
---- /dev/null
-+++ b/drivers/nvmem/apple-efuses.c
-@@ -0,0 +1,80 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Apple SoC eFuse driver
-+ *
-+ * Copyright (C) The Asahi Linux Contributors
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/platform_device.h>
-+
-+struct apple_efuses_priv {
-+	void __iomem *fuses;
-+};
-+
-+static int apple_efuses_read(void *context, unsigned int offset, void *val,
-+			     size_t bytes)
-+{
-+	struct apple_efuses_priv *priv = context;
-+	u32 *dst = val;
-+
-+	while (bytes >= sizeof(u32)) {
-+		*dst++ = readl_relaxed(priv->fuses + offset);
-+		bytes -= sizeof(u32);
-+		offset += sizeof(u32);
-+	}
-+
-+	return 0;
-+}
-+
-+static int apple_efuses_probe(struct platform_device *pdev)
-+{
-+	struct apple_efuses_priv *priv;
-+	struct resource *res;
-+	struct nvmem_config config = {
-+		.dev = &pdev->dev,
-+		.read_only = true,
-+		.reg_read = apple_efuses_read,
-+		.stride = sizeof(u32),
-+		.word_size = sizeof(u32),
-+		.name = "apple_efuses_nvmem",
-+		.id = NVMEM_DEVID_AUTO,
-+		.root_only = true,
-+	};
-+
-+	priv = devm_kzalloc(config.dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->fuses = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
-+	if (IS_ERR(priv->fuses))
-+		return PTR_ERR(priv->fuses);
-+
-+	config.priv = priv;
-+	config.size = resource_size(res);
-+
-+	return PTR_ERR_OR_ZERO(devm_nvmem_register(config.dev, &config));
-+}
-+
-+static const struct of_device_id apple_efuses_of_match[] = {
-+	{ .compatible = "apple,efuses", },
-+	{}
-+};
-+
-+MODULE_DEVICE_TABLE(of, apple_efuses_of_match);
-+
-+static struct platform_driver apple_efuses_driver = {
-+	.driver = {
-+		.name = "apple_efuses",
-+		.of_match_table = apple_efuses_of_match,
-+	},
-+	.probe = apple_efuses_probe,
-+};
-+
-+module_platform_driver(apple_efuses_driver);
-+
-+MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-5.10/809-v5.19-0007-nvmem-qfprom-using-pm_runtime_resume_and_get-instead.patch b/target/linux/generic/backport-5.10/809-v5.19-0007-nvmem-qfprom-using-pm_runtime_resume_and_get-instead.patch
deleted file mode 100644
index cd51d9700691..000000000000
--- a/target/linux/generic/backport-5.10/809-v5.19-0007-nvmem-qfprom-using-pm_runtime_resume_and_get-instead.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 517f6e2641a2802dce5a5aa0d18c7d37a35678d2 Mon Sep 17 00:00:00 2001
-From: Minghao Chi <chi.minghao@zte.com.cn>
-Date: Fri, 29 Apr 2022 17:26:54 +0100
-Subject: [PATCH] nvmem: qfprom: using pm_runtime_resume_and_get instead of
- pm_runtime_get_sync
-
-Using pm_runtime_resume_and_get is more appropriate
-for simplifing code
-
-Reported-by: Zeal Robot <zealci@zte.com.cn>
-Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220429162701.2222-10-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qfprom.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/nvmem/qfprom.c
-+++ b/drivers/nvmem/qfprom.c
-@@ -217,9 +217,8 @@ static int qfprom_enable_fuse_blowing(co
- 		goto err_clk_rate_set;
- 	}
- 
--	ret = pm_runtime_get_sync(priv->dev);
-+	ret = pm_runtime_resume_and_get(priv->dev);
- 	if (ret < 0) {
--		pm_runtime_put_noidle(priv->dev);
- 		dev_err(priv->dev, "Failed to enable power-domain\n");
- 		goto err_reg_enable;
- 	}
diff --git a/target/linux/generic/backport-5.10/809-v5.19-0008-nvmem-sfp-Use-regmap.patch b/target/linux/generic/backport-5.10/809-v5.19-0008-nvmem-sfp-Use-regmap.patch
deleted file mode 100644
index e187238ca38f..000000000000
--- a/target/linux/generic/backport-5.10/809-v5.19-0008-nvmem-sfp-Use-regmap.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From 943eadbdb11314b41eacbcc484dfb7f93e271ff4 Mon Sep 17 00:00:00 2001
-From: Sean Anderson <sean.anderson@seco.com>
-Date: Fri, 29 Apr 2022 17:27:00 +0100
-Subject: [PATCH] nvmem: sfp: Use regmap
-
-This converts the SFP driver to use regmap. This will allow easily
-supporting devices with different endians. We disallow byte-level
-access, as regmap_bulk_read doesn't support it (and it's unclear what
-the correct result would be when we have an endianness difference).
-
-Signed-off-by: Sean Anderson <sean.anderson@seco.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220429162701.2222-16-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig          |  1 +
- drivers/nvmem/layerscape-sfp.c | 30 ++++++++++++++++++++++--------
- 2 files changed, 23 insertions(+), 8 deletions(-)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -304,6 +304,7 @@ config NVMEM_LAYERSCAPE_SFP
- 	tristate "Layerscape SFP (Security Fuse Processor) support"
- 	depends on ARCH_LAYERSCAPE || COMPILE_TEST
- 	depends on HAS_IOMEM
-+	select REGMAP_MMIO
- 	help
- 	  This driver provides support to read the eFuses on Freescale
- 	  Layerscape SoC's. For example, the vendor provides a per part
---- a/drivers/nvmem/layerscape-sfp.c
-+++ b/drivers/nvmem/layerscape-sfp.c
-@@ -13,15 +13,17 @@
- #include <linux/nvmem-provider.h>
- #include <linux/platform_device.h>
- #include <linux/property.h>
-+#include <linux/regmap.h>
- 
- #define LAYERSCAPE_SFP_OTP_OFFSET	0x0200
- 
- struct layerscape_sfp_priv {
--	void __iomem *base;
-+	struct regmap *regmap;
- };
- 
- struct layerscape_sfp_data {
- 	int size;
-+	enum regmap_endian endian;
- };
- 
- static int layerscape_sfp_read(void *context, unsigned int offset, void *val,
-@@ -29,15 +31,16 @@ static int layerscape_sfp_read(void *con
- {
- 	struct layerscape_sfp_priv *priv = context;
- 
--	memcpy_fromio(val, priv->base + LAYERSCAPE_SFP_OTP_OFFSET + offset,
--		      bytes);
--
--	return 0;
-+	return regmap_bulk_read(priv->regmap,
-+				LAYERSCAPE_SFP_OTP_OFFSET + offset, val,
-+				bytes / 4);
- }
- 
- static struct nvmem_config layerscape_sfp_nvmem_config = {
- 	.name = "fsl-sfp",
- 	.reg_read = layerscape_sfp_read,
-+	.word_size = 4,
-+	.stride = 4,
- };
- 
- static int layerscape_sfp_probe(struct platform_device *pdev)
-@@ -45,16 +48,26 @@ static int layerscape_sfp_probe(struct p
- 	const struct layerscape_sfp_data *data;
- 	struct layerscape_sfp_priv *priv;
- 	struct nvmem_device *nvmem;
-+	struct regmap_config config = { 0 };
-+	void __iomem *base;
- 
- 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
- 		return -ENOMEM;
- 
--	priv->base = devm_platform_ioremap_resource(pdev, 0);
--	if (IS_ERR(priv->base))
--		return PTR_ERR(priv->base);
-+	base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(base))
-+		return PTR_ERR(base);
- 
- 	data = device_get_match_data(&pdev->dev);
-+	config.reg_bits = 32;
-+	config.reg_stride = 4;
-+	config.val_bits = 32;
-+	config.val_format_endian = data->endian;
-+	config.max_register = LAYERSCAPE_SFP_OTP_OFFSET + data->size - 4;
-+	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, &config);
-+	if (IS_ERR(priv->regmap))
-+		return PTR_ERR(priv->regmap);
- 
- 	layerscape_sfp_nvmem_config.size = data->size;
- 	layerscape_sfp_nvmem_config.dev = &pdev->dev;
-@@ -67,6 +80,7 @@ static int layerscape_sfp_probe(struct p
- 
- static const struct layerscape_sfp_data ls1028a_data = {
- 	.size = 0x88,
-+	.endian = REGMAP_ENDIAN_LITTLE,
- };
- 
- static const struct of_device_id layerscape_sfp_dt_ids[] = {
diff --git a/target/linux/generic/backport-5.10/809-v5.19-0009-nvmem-sfp-Add-support-for-TA-2.1-devices.patch b/target/linux/generic/backport-5.10/809-v5.19-0009-nvmem-sfp-Add-support-for-TA-2.1-devices.patch
deleted file mode 100644
index ee000986181a..000000000000
--- a/target/linux/generic/backport-5.10/809-v5.19-0009-nvmem-sfp-Add-support-for-TA-2.1-devices.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 33a1c6618677fe33f8e84cb7bedc45abbce89a50 Mon Sep 17 00:00:00 2001
-From: Sean Anderson <sean.anderson@seco.com>
-Date: Fri, 29 Apr 2022 17:27:01 +0100
-Subject: [PATCH] nvmem: sfp: Add support for TA 2.1 devices
-
-This adds support for Trust Architecture (TA) 2.1 devices to the SFP driver.
-There are few differences between TA 2.1 and TA 3.0, especially for
-read-only support, so just re-use the existing data.
-
-Signed-off-by: Sean Anderson <sean.anderson@seco.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220429162701.2222-17-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layerscape-sfp.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/nvmem/layerscape-sfp.c
-+++ b/drivers/nvmem/layerscape-sfp.c
-@@ -78,12 +78,18 @@ static int layerscape_sfp_probe(struct p
- 	return PTR_ERR_OR_ZERO(nvmem);
- }
- 
-+static const struct layerscape_sfp_data ls1021a_data = {
-+	.size = 0x88,
-+	.endian = REGMAP_ENDIAN_BIG,
-+};
-+
- static const struct layerscape_sfp_data ls1028a_data = {
- 	.size = 0x88,
- 	.endian = REGMAP_ENDIAN_LITTLE,
- };
- 
- static const struct of_device_id layerscape_sfp_dt_ids[] = {
-+	{ .compatible = "fsl,ls1021a-sfp", .data = &ls1021a_data },
- 	{ .compatible = "fsl,ls1028a-sfp", .data = &ls1028a_data },
- 	{},
- };
diff --git a/target/linux/generic/backport-5.10/810-v6.0-0001-nvmem-microchip-otpc-add-support.patch b/target/linux/generic/backport-5.10/810-v6.0-0001-nvmem-microchip-otpc-add-support.patch
deleted file mode 100644
index eb99ec190cbe..000000000000
--- a/target/linux/generic/backport-5.10/810-v6.0-0001-nvmem-microchip-otpc-add-support.patch
+++ /dev/null
@@ -1,389 +0,0 @@
-From 98830350d3fc824c1ff5c338140fe20f041a5916 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Wed, 6 Jul 2022 11:06:22 +0100
-Subject: [PATCH] nvmem: microchip-otpc: add support
-
-Add support for Microchip OTP controller available on SAMA7G5. The OTPC
-controls the access to a non-volatile memory. The memory behind OTPC is
-organized into packets, packets are composed by a fixed length header
-(4 bytes long) and a variable length payload (payload length is available
-in the header). When software request the data at an offset in memory
-the OTPC will return (via header + data registers) the whole packet that
-has a word at that offset. For the OTP memory layout like below:
-
-offset  OTP Memory layout
-
-         .           .
-         .    ...    .
-         .           .
-0x0E     +-----------+	<--- packet X
-         | header  X |
-0x12     +-----------+
-         | payload X |
-0x16     |           |
-         |           |
-0x1A     |           |
-         +-----------+
-         .           .
-         .    ...    .
-         .           .
-
-if user requests data at address 0x16 the data started at 0x0E will be
-returned by controller. User will be able to fetch the whole packet
-starting at 0x0E (or parts of the packet) via proper registers. The same
-packet will be returned if software request the data at offset 0x0E or
-0x12 or 0x1A.
-
-The OTP will be populated by Microchip with at least 2 packets first one
-being boot configuration packet and the 2nd one being temperature
-calibration packet. The packet order will be preserved b/w different chip
-revisions but the packet sizes may change.
-
-For the above reasons and to keep the same software able to work on all
-chip variants the read function of the driver is working with a packet
-id instead of an offset in OTP memory.
-
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220706100627.6534-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- MAINTAINERS                    |   8 +
- drivers/nvmem/Kconfig          |   7 +
- drivers/nvmem/Makefile         |   2 +
- drivers/nvmem/microchip-otpc.c | 288 +++++++++++++++++++++++++++++++++
- 4 files changed, 305 insertions(+)
- create mode 100644 drivers/nvmem/microchip-otpc.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -11565,6 +11565,14 @@ S:	Supported
- F:	Documentation/devicetree/bindings/mtd/atmel-nand.txt
- F:	drivers/mtd/nand/raw/atmel/*
- 
-+MICROCHIP OTPC DRIVER
-+M:	Claudiu Beznea <claudiu.beznea@microchip.com>
-+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-+S:	Supported
-+F:	Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
-+F:	drivers/nvmem/microchip-otpc.c
-+F:	dt-bindings/nvmem/microchip,sama7g5-otpc.h
-+
- MICROCHIP PWM DRIVER
- M:	Claudiu Beznea <claudiu.beznea@microchip.com>
- L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -107,6 +107,13 @@ config MTK_EFUSE
- 	  This driver can also be built as a module. If so, the module
- 	  will be called efuse-mtk.
- 
-+config MICROCHIP_OTPC
-+	tristate "Microchip OTPC support"
-+	depends on ARCH_AT91 || COMPILE_TEST
-+	help
-+	  This driver enable the OTP controller available on Microchip SAMA7G5
-+	  SoCs. It controlls the access to the OTP memory connected to it.
-+
- config NVMEM_NINTENDO_OTP
- 	tristate "Nintendo Wii and Wii U OTP Support"
- 	depends on WII || COMPILE_TEST
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -67,3 +67,5 @@ obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP)	+= nvm
- nvmem_sunplus_ocotp-y		:= sunplus-ocotp.o
- obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvmem-apple-efuses.o
- nvmem-apple-efuses-y 		:= apple-efuses.o
-+obj-$(CONFIG_MICROCHIP_OTPC)	+= nvmem-microchip-otpc.o
-+nvmem-microchip-otpc-y		:= microchip-otpc.o
---- /dev/null
-+++ b/drivers/nvmem/microchip-otpc.c
-@@ -0,0 +1,288 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * OTP Memory controller
-+ *
-+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
-+ *
-+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
-+ */
-+
-+#include <linux/bitfield.h>
-+#include <linux/iopoll.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+
-+#define MCHP_OTPC_CR			(0x0)
-+#define MCHP_OTPC_CR_READ		BIT(6)
-+#define MCHP_OTPC_MR			(0x4)
-+#define MCHP_OTPC_MR_ADDR		GENMASK(31, 16)
-+#define MCHP_OTPC_AR			(0x8)
-+#define MCHP_OTPC_SR			(0xc)
-+#define MCHP_OTPC_SR_READ		BIT(6)
-+#define MCHP_OTPC_HR			(0x20)
-+#define MCHP_OTPC_HR_SIZE		GENMASK(15, 8)
-+#define MCHP_OTPC_DR			(0x24)
-+
-+#define MCHP_OTPC_NAME			"mchp-otpc"
-+#define MCHP_OTPC_SIZE			(11 * 1024)
-+
-+/**
-+ * struct mchp_otpc - OTPC private data structure
-+ * @base: base address
-+ * @dev: struct device pointer
-+ * @packets: list of packets in OTP memory
-+ * @npackets: number of packets in OTP memory
-+ */
-+struct mchp_otpc {
-+	void __iomem *base;
-+	struct device *dev;
-+	struct list_head packets;
-+	u32 npackets;
-+};
-+
-+/**
-+ * struct mchp_otpc_packet - OTPC packet data structure
-+ * @list: list head
-+ * @id: packet ID
-+ * @offset: packet offset (in words) in OTP memory
-+ */
-+struct mchp_otpc_packet {
-+	struct list_head list;
-+	u32 id;
-+	u32 offset;
-+};
-+
-+static struct mchp_otpc_packet *mchp_otpc_id_to_packet(struct mchp_otpc *otpc,
-+						       u32 id)
-+{
-+	struct mchp_otpc_packet *packet;
-+
-+	if (id >= otpc->npackets)
-+		return NULL;
-+
-+	list_for_each_entry(packet, &otpc->packets, list) {
-+		if (packet->id == id)
-+			return packet;
-+	}
-+
-+	return NULL;
-+}
-+
-+static int mchp_otpc_prepare_read(struct mchp_otpc *otpc,
-+				  unsigned int offset)
-+{
-+	u32 tmp;
-+
-+	/* Set address. */
-+	tmp = readl_relaxed(otpc->base + MCHP_OTPC_MR);
-+	tmp &= ~MCHP_OTPC_MR_ADDR;
-+	tmp |= FIELD_PREP(MCHP_OTPC_MR_ADDR, offset);
-+	writel_relaxed(tmp, otpc->base + MCHP_OTPC_MR);
-+
-+	/* Set read. */
-+	tmp = readl_relaxed(otpc->base + MCHP_OTPC_CR);
-+	tmp |= MCHP_OTPC_CR_READ;
-+	writel_relaxed(tmp, otpc->base + MCHP_OTPC_CR);
-+
-+	/* Wait for packet to be transferred into temporary buffers. */
-+	return read_poll_timeout(readl_relaxed, tmp, !(tmp & MCHP_OTPC_SR_READ),
-+				 10000, 2000, false, otpc->base + MCHP_OTPC_SR);
-+}
-+
-+/*
-+ * OTPC memory is organized into packets. Each packets contains a header and
-+ * a payload. Header is 4 bytes long and contains the size of the payload.
-+ * Payload size varies. The memory footprint is something as follows:
-+ *
-+ * Memory offset  Memory footprint     Packet ID
-+ * -------------  ----------------     ---------
-+ *
-+ * 0x0            +------------+   <-- packet 0
-+ *                | header  0  |
-+ * 0x4            +------------+
-+ *                | payload 0  |
-+ *                .            .
-+ *                .    ...     .
-+ *                .            .
-+ * offset1        +------------+   <-- packet 1
-+ *                | header  1  |
-+ * offset1 + 0x4  +------------+
-+ *                | payload 1  |
-+ *                .            .
-+ *                .    ...     .
-+ *                .            .
-+ * offset2        +------------+   <-- packet 2
-+ *                .            .
-+ *                .    ...     .
-+ *                .            .
-+ * offsetN        +------------+   <-- packet N
-+ *                | header  N  |
-+ * offsetN + 0x4  +------------+
-+ *                | payload N  |
-+ *                .            .
-+ *                .    ...     .
-+ *                .            .
-+ *                +------------+
-+ *
-+ * where offset1, offset2, offsetN depends on the size of payload 0, payload 1,
-+ * payload N-1.
-+ *
-+ * The access to memory is done on a per packet basis: the control registers
-+ * need to be updated with an offset address (within a packet range) and the
-+ * data registers will be update by controller with information contained by
-+ * that packet. E.g. if control registers are updated with any address within
-+ * the range [offset1, offset2) the data registers are updated by controller
-+ * with packet 1. Header data is accessible though MCHP_OTPC_HR register.
-+ * Payload data is accessible though MCHP_OTPC_DR and MCHP_OTPC_AR registers.
-+ * There is no direct mapping b/w the offset requested by software and the
-+ * offset returned by hardware.
-+ *
-+ * For this, the read function will return the first requested bytes in the
-+ * packet. The user will have to be aware of the memory footprint before doing
-+ * the read request.
-+ */
-+static int mchp_otpc_read(void *priv, unsigned int off, void *val,
-+			  size_t bytes)
-+{
-+	struct mchp_otpc *otpc = priv;
-+	struct mchp_otpc_packet *packet;
-+	u32 *buf = val;
-+	u32 offset;
-+	size_t len = 0;
-+	int ret, payload_size;
-+
-+	/*
-+	 * We reach this point with off being multiple of stride = 4 to
-+	 * be able to cross the subsystem. Inside the driver we use continuous
-+	 * unsigned integer numbers for packet id, thus devide off by 4
-+	 * before passing it to mchp_otpc_id_to_packet().
-+	 */
-+	packet = mchp_otpc_id_to_packet(otpc, off / 4);
-+	if (!packet)
-+		return -EINVAL;
-+	offset = packet->offset;
-+
-+	while (len < bytes) {
-+		ret = mchp_otpc_prepare_read(otpc, offset);
-+		if (ret)
-+			return ret;
-+
-+		/* Read and save header content. */
-+		*buf++ = readl_relaxed(otpc->base + MCHP_OTPC_HR);
-+		len += sizeof(*buf);
-+		offset++;
-+		if (len >= bytes)
-+			break;
-+
-+		/* Read and save payload content. */
-+		payload_size = FIELD_GET(MCHP_OTPC_HR_SIZE, *(buf - 1));
-+		writel_relaxed(0UL, otpc->base + MCHP_OTPC_AR);
-+		do {
-+			*buf++ = readl_relaxed(otpc->base + MCHP_OTPC_DR);
-+			len += sizeof(*buf);
-+			offset++;
-+			payload_size--;
-+		} while (payload_size >= 0 && len < bytes);
-+	}
-+
-+	return 0;
-+}
-+
-+static int mchp_otpc_init_packets_list(struct mchp_otpc *otpc, u32 *size)
-+{
-+	struct mchp_otpc_packet *packet;
-+	u32 word, word_pos = 0, id = 0, npackets = 0, payload_size;
-+	int ret;
-+
-+	INIT_LIST_HEAD(&otpc->packets);
-+	*size = 0;
-+
-+	while (*size < MCHP_OTPC_SIZE) {
-+		ret = mchp_otpc_prepare_read(otpc, word_pos);
-+		if (ret)
-+			return ret;
-+
-+		word = readl_relaxed(otpc->base + MCHP_OTPC_HR);
-+		payload_size = FIELD_GET(MCHP_OTPC_HR_SIZE, word);
-+		if (!payload_size)
-+			break;
-+
-+		packet = devm_kzalloc(otpc->dev, sizeof(*packet), GFP_KERNEL);
-+		if (!packet)
-+			return -ENOMEM;
-+
-+		packet->id = id++;
-+		packet->offset = word_pos;
-+		INIT_LIST_HEAD(&packet->list);
-+		list_add_tail(&packet->list, &otpc->packets);
-+
-+		/* Count size by adding header and paload sizes. */
-+		*size += 4 * (payload_size + 1);
-+		/* Next word: this packet (header, payload) position + 1. */
-+		word_pos += payload_size + 2;
-+
-+		npackets++;
-+	}
-+
-+	otpc->npackets = npackets;
-+
-+	return 0;
-+}
-+
-+static struct nvmem_config mchp_nvmem_config = {
-+	.name = MCHP_OTPC_NAME,
-+	.type = NVMEM_TYPE_OTP,
-+	.read_only = true,
-+	.word_size = 4,
-+	.stride = 4,
-+	.reg_read = mchp_otpc_read,
-+};
-+
-+static int mchp_otpc_probe(struct platform_device *pdev)
-+{
-+	struct nvmem_device *nvmem;
-+	struct mchp_otpc *otpc;
-+	u32 size;
-+	int ret;
-+
-+	otpc = devm_kzalloc(&pdev->dev, sizeof(*otpc), GFP_KERNEL);
-+	if (!otpc)
-+		return -ENOMEM;
-+
-+	otpc->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(otpc->base))
-+		return PTR_ERR(otpc->base);
-+
-+	otpc->dev = &pdev->dev;
-+	ret = mchp_otpc_init_packets_list(otpc, &size);
-+	if (ret)
-+		return ret;
-+
-+	mchp_nvmem_config.dev = otpc->dev;
-+	mchp_nvmem_config.size = size;
-+	mchp_nvmem_config.priv = otpc;
-+	nvmem = devm_nvmem_register(&pdev->dev, &mchp_nvmem_config);
-+
-+	return PTR_ERR_OR_ZERO(nvmem);
-+}
-+
-+static const struct of_device_id __maybe_unused mchp_otpc_ids[] = {
-+	{ .compatible = "microchip,sama7g5-otpc", },
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(of, mchp_otpc_ids);
-+
-+static struct platform_driver mchp_otpc_driver = {
-+	.probe = mchp_otpc_probe,
-+	.driver = {
-+		.name = MCHP_OTPC_NAME,
-+		.of_match_table = of_match_ptr(mchp_otpc_ids),
-+	},
-+};
-+module_platform_driver(mchp_otpc_driver);
-+
-+MODULE_AUTHOR("Claudiu Beznea <claudiu.beznea@microchip.com>");
-+MODULE_DESCRIPTION("Microchip SAMA7G5 OTPC driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-5.10/810-v6.0-0002-nvmem-mtk-efuse-Simplify-with-devm_platform_get_and_.patch b/target/linux/generic/backport-5.10/810-v6.0-0002-nvmem-mtk-efuse-Simplify-with-devm_platform_get_and_.patch
deleted file mode 100644
index 6a4126b9deda..000000000000
--- a/target/linux/generic/backport-5.10/810-v6.0-0002-nvmem-mtk-efuse-Simplify-with-devm_platform_get_and_.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From f5c97da8037b18d1256a58459fa96ed68e50fb41 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Wed, 6 Jul 2022 11:06:27 +0100
-Subject: [PATCH] nvmem: mtk-efuse: Simplify with
- devm_platform_get_and_ioremap_resource()
-
-Convert platform_get_resource(), devm_ioremap_resource() to a single
-call to devm_platform_get_and_ioremap_resource(), as this is exactly
-what this function does.
-
-No functional changes.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220706100627.6534-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/mtk-efuse.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/nvmem/mtk-efuse.c
-+++ b/drivers/nvmem/mtk-efuse.c
-@@ -41,8 +41,7 @@ static int mtk_efuse_probe(struct platfo
- 	if (!priv)
- 		return -ENOMEM;
- 
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	priv->base = devm_ioremap_resource(dev, res);
-+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
- 	if (IS_ERR(priv->base))
- 		return PTR_ERR(priv->base);
- 
diff --git a/target/linux/generic/backport-5.10/811-v6.1-0001-nvmem-core-Fix-memleak-in-nvmem_register.patch b/target/linux/generic/backport-5.10/811-v6.1-0001-nvmem-core-Fix-memleak-in-nvmem_register.patch
deleted file mode 100644
index 561af918934b..000000000000
--- a/target/linux/generic/backport-5.10/811-v6.1-0001-nvmem-core-Fix-memleak-in-nvmem_register.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From bd1244561fa2a4531ded40dbf09c9599084f8b29 Mon Sep 17 00:00:00 2001
-From: Gaosheng Cui <cuigaosheng1@huawei.com>
-Date: Fri, 16 Sep 2022 13:04:02 +0100
-Subject: [PATCH] nvmem: core: Fix memleak in nvmem_register()
-
-dev_set_name will alloc memory for nvmem->dev.kobj.name in
-nvmem_register, when nvmem_validate_keepouts failed, nvmem's
-memory will be freed and return, but nobody will free memory
-for nvmem->dev.kobj.name, there will be memleak, so moving
-nvmem_validate_keepouts() after device_register() and let
-the device core deal with cleaning name in error cases.
-
-Fixes: de0534df9347 ("nvmem: core: fix error handling while validating keepout regions")
-Cc: stable@vger.kernel.org
-Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220916120402.38753-1-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 15 ++++++---------
- 1 file changed, 6 insertions(+), 9 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -833,6 +833,12 @@ struct nvmem_device *nvmem_register(cons
- 	nvmem->dev.groups = nvmem_dev_groups;
- #endif
- 
-+	if (nvmem->nkeepout) {
-+		rval = nvmem_validate_keepouts(nvmem);
-+		if (rval)
-+			goto err_put_device;
-+	}
-+
- 	if (config->compat) {
- 		rval = nvmem_sysfs_setup_compat(nvmem, config);
- 		if (rval)
-@@ -853,15 +859,6 @@ struct nvmem_device *nvmem_register(cons
- 	if (rval)
- 		goto err_remove_cells;
- 
--	if (nvmem->nkeepout) {
--		rval = nvmem_validate_keepouts(nvmem);
--		if (rval) {
--			ida_free(&nvmem_ida, nvmem->id);
--			kfree(nvmem);
--			return ERR_PTR(rval);
--		}
--	}
--
- 	dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
- 
- 	rval = device_add(&nvmem->dev);
diff --git a/target/linux/generic/backport-5.10/811-v6.1-0002-nvmem-add-driver-handling-U-Boot-environment-variabl.patch b/target/linux/generic/backport-5.10/811-v6.1-0002-nvmem-add-driver-handling-U-Boot-environment-variabl.patch
deleted file mode 100644
index 9138807bc91c..000000000000
--- a/target/linux/generic/backport-5.10/811-v6.1-0002-nvmem-add-driver-handling-U-Boot-environment-variabl.patch
+++ /dev/null
@@ -1,286 +0,0 @@
-From d5542923f200f95bddf524f36fd495f78aa28e3c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 16 Sep 2022 13:20:48 +0100
-Subject: [PATCH] nvmem: add driver handling U-Boot environment variables
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-U-Boot stores its setup as environment variables. It's a list of
-key-value pairs stored on flash device with a custom header.
-
-This commit adds an NVMEM driver that:
-1. Provides NVMEM access to environment vars binary data
-2. Extracts variables as NVMEM cells
-
-Current Linux's NVMEM sysfs API allows reading whole NVMEM data block.
-It can be used by user-space tools for reading U-Boot env vars block
-without the hassle of finding its location. Parsing will still need to
-be re-done there.
-
-Kernel-parsed NVMEM cells can be read however by Linux drivers. This may
-be useful for Ethernet drivers for reading device MAC address which is
-often stored as U-Boot env variable.
-
-Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220916122100.170016-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- MAINTAINERS                |   1 +
- drivers/nvmem/Kconfig      |  13 +++
- drivers/nvmem/Makefile     |   2 +
- drivers/nvmem/u-boot-env.c | 218 +++++++++++++++++++++++++++++++++++++
- 4 files changed, 234 insertions(+)
- create mode 100644 drivers/nvmem/u-boot-env.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -344,4 +344,17 @@ config NVMEM_APPLE_EFUSES
- 	  This driver can also be built as a module. If so, the module will
- 	  be called nvmem-apple-efuses.
- 
-+config NVMEM_U_BOOT_ENV
-+	tristate "U-Boot environment variables support"
-+	depends on OF && MTD
-+	select CRC32
-+	help
-+	  U-Boot stores its setup as environment variables. This driver adds
-+	  support for verifying & exporting such data. It also exposes variables
-+	  as NVMEM cells so they can be referenced by other drivers.
-+
-+	  Currently this drivers works only with env variables on top of MTD.
-+
-+	  If compiled as module it will be called nvmem_u-boot-env.
-+
- endif
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -69,3 +69,5 @@ obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvme
- nvmem-apple-efuses-y 		:= apple-efuses.o
- obj-$(CONFIG_MICROCHIP_OTPC)	+= nvmem-microchip-otpc.o
- nvmem-microchip-otpc-y		:= microchip-otpc.o
-+obj-$(CONFIG_NVMEM_U_BOOT_ENV)	+= nvmem_u-boot-env.o
-+nvmem_u-boot-env-y		:= u-boot-env.o
---- /dev/null
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -0,0 +1,218 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2022 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/crc32.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+enum u_boot_env_format {
-+	U_BOOT_FORMAT_SINGLE,
-+	U_BOOT_FORMAT_REDUNDANT,
-+};
-+
-+struct u_boot_env {
-+	struct device *dev;
-+	enum u_boot_env_format format;
-+
-+	struct mtd_info *mtd;
-+
-+	/* Cells */
-+	struct nvmem_cell_info *cells;
-+	int ncells;
-+};
-+
-+struct u_boot_env_image_single {
-+	__le32 crc32;
-+	uint8_t data[];
-+} __packed;
-+
-+struct u_boot_env_image_redundant {
-+	__le32 crc32;
-+	u8 mark;
-+	uint8_t data[];
-+} __packed;
-+
-+static int u_boot_env_read(void *context, unsigned int offset, void *val,
-+			   size_t bytes)
-+{
-+	struct u_boot_env *priv = context;
-+	struct device *dev = priv->dev;
-+	size_t bytes_read;
-+	int err;
-+
-+	err = mtd_read(priv->mtd, offset, bytes, &bytes_read, val);
-+	if (err && !mtd_is_bitflip(err)) {
-+		dev_err(dev, "Failed to read from mtd: %d\n", err);
-+		return err;
-+	}
-+
-+	if (bytes_read != bytes) {
-+		dev_err(dev, "Failed to read %zu bytes\n", bytes);
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
-+
-+static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
-+				size_t data_offset, size_t data_len)
-+{
-+	struct device *dev = priv->dev;
-+	char *data = buf + data_offset;
-+	char *var, *value, *eq;
-+	int idx;
-+
-+	priv->ncells = 0;
-+	for (var = data; var < data + data_len && *var; var += strlen(var) + 1)
-+		priv->ncells++;
-+
-+	priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL);
-+	if (!priv->cells)
-+		return -ENOMEM;
-+
-+	for (var = data, idx = 0;
-+	     var < data + data_len && *var;
-+	     var = value + strlen(value) + 1, idx++) {
-+		eq = strchr(var, '=');
-+		if (!eq)
-+			break;
-+		*eq = '\0';
-+		value = eq + 1;
-+
-+		priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL);
-+		if (!priv->cells[idx].name)
-+			return -ENOMEM;
-+		priv->cells[idx].offset = data_offset + value - data;
-+		priv->cells[idx].bytes = strlen(value);
-+	}
-+
-+	if (WARN_ON(idx != priv->ncells))
-+		priv->ncells = idx;
-+
-+	return 0;
-+}
-+
-+static int u_boot_env_parse(struct u_boot_env *priv)
-+{
-+	struct device *dev = priv->dev;
-+	size_t crc32_data_offset;
-+	size_t crc32_data_len;
-+	size_t crc32_offset;
-+	size_t data_offset;
-+	size_t data_len;
-+	uint32_t crc32;
-+	uint32_t calc;
-+	size_t bytes;
-+	uint8_t *buf;
-+	int err;
-+
-+	buf = kcalloc(1, priv->mtd->size, GFP_KERNEL);
-+	if (!buf) {
-+		err = -ENOMEM;
-+		goto err_out;
-+	}
-+
-+	err = mtd_read(priv->mtd, 0, priv->mtd->size, &bytes, buf);
-+	if ((err && !mtd_is_bitflip(err)) || bytes != priv->mtd->size) {
-+		dev_err(dev, "Failed to read from mtd: %d\n", err);
-+		goto err_kfree;
-+	}
-+
-+	switch (priv->format) {
-+	case U_BOOT_FORMAT_SINGLE:
-+		crc32_offset = offsetof(struct u_boot_env_image_single, crc32);
-+		crc32_data_offset = offsetof(struct u_boot_env_image_single, data);
-+		data_offset = offsetof(struct u_boot_env_image_single, data);
-+		break;
-+	case U_BOOT_FORMAT_REDUNDANT:
-+		crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32);
-+		crc32_data_offset = offsetof(struct u_boot_env_image_redundant, mark);
-+		data_offset = offsetof(struct u_boot_env_image_redundant, data);
-+		break;
-+	}
-+	crc32 = le32_to_cpu(*(uint32_t *)(buf + crc32_offset));
-+	crc32_data_len = priv->mtd->size - crc32_data_offset;
-+	data_len = priv->mtd->size - data_offset;
-+
-+	calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
-+	if (calc != crc32) {
-+		dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32);
-+		err = -EINVAL;
-+		goto err_kfree;
-+	}
-+
-+	buf[priv->mtd->size - 1] = '\0';
-+	err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
-+	if (err)
-+		dev_err(dev, "Failed to add cells: %d\n", err);
-+
-+err_kfree:
-+	kfree(buf);
-+err_out:
-+	return err;
-+}
-+
-+static int u_boot_env_probe(struct platform_device *pdev)
-+{
-+	struct nvmem_config config = {
-+		.name = "u-boot-env",
-+		.reg_read = u_boot_env_read,
-+	};
-+	struct device *dev = &pdev->dev;
-+	struct device_node *np = dev->of_node;
-+	struct u_boot_env *priv;
-+	int err;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+	priv->dev = dev;
-+
-+	priv->format = (uintptr_t)of_device_get_match_data(dev);
-+
-+	priv->mtd = of_get_mtd_device_by_node(np);
-+	if (IS_ERR(priv->mtd)) {
-+		dev_err_probe(dev, PTR_ERR(priv->mtd), "Failed to get %pOF MTD\n", np);
-+		return PTR_ERR(priv->mtd);
-+	}
-+
-+	err = u_boot_env_parse(priv);
-+	if (err)
-+		return err;
-+
-+	config.dev = dev;
-+	config.cells = priv->cells;
-+	config.ncells = priv->ncells;
-+	config.priv = priv;
-+	config.size = priv->mtd->size;
-+
-+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
-+}
-+
-+static const struct of_device_id u_boot_env_of_match_table[] = {
-+	{ .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, },
-+	{ .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
-+	{ .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
-+	{},
-+};
-+
-+static struct platform_driver u_boot_env_driver = {
-+	.probe = u_boot_env_probe,
-+	.driver = {
-+		.name = "u_boot_env",
-+		.of_match_table = u_boot_env_of_match_table,
-+	},
-+};
-+module_platform_driver(u_boot_env_driver);
-+
-+MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_LICENSE("GPL");
-+MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table);
diff --git a/target/linux/generic/backport-5.10/811-v6.1-0004-nvmem-brcm_nvram-Use-kzalloc-for-allocating-only-one.patch b/target/linux/generic/backport-5.10/811-v6.1-0004-nvmem-brcm_nvram-Use-kzalloc-for-allocating-only-one.patch
deleted file mode 100644
index 48ad63fab5f9..000000000000
--- a/target/linux/generic/backport-5.10/811-v6.1-0004-nvmem-brcm_nvram-Use-kzalloc-for-allocating-only-one.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From d3524bb5b9a0c567b853a0024526afe87dde01ed Mon Sep 17 00:00:00 2001
-From: Kenneth Lee <klee33@uw.edu>
-Date: Fri, 16 Sep 2022 13:20:52 +0100
-Subject: [PATCH] nvmem: brcm_nvram: Use kzalloc for allocating only one
- element
-
-Use kzalloc(...) rather than kcalloc(1, ...) because the number of
-elements we are specifying in this case is 1, so kzalloc would
-accomplish the same thing and we can simplify.
-
-Signed-off-by: Kenneth Lee <klee33@uw.edu>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220916122100.170016-6-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/brcm_nvram.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/brcm_nvram.c
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -96,7 +96,7 @@ static int brcm_nvram_parse(struct brcm_
- 
- 	len = le32_to_cpu(header.len);
- 
--	data = kcalloc(1, len, GFP_KERNEL);
-+	data = kzalloc(len, GFP_KERNEL);
- 	memcpy_fromio(data, priv->base, len);
- 	data[len - 1] = '\0';
- 
diff --git a/target/linux/generic/backport-5.10/811-v6.1-0005-nvmem-prefix-all-symbols-with-NVMEM_.patch b/target/linux/generic/backport-5.10/811-v6.1-0005-nvmem-prefix-all-symbols-with-NVMEM_.patch
deleted file mode 100644
index a3d256d5c7a8..000000000000
--- a/target/linux/generic/backport-5.10/811-v6.1-0005-nvmem-prefix-all-symbols-with-NVMEM_.patch
+++ /dev/null
@@ -1,270 +0,0 @@
-From 28fc7c986f01fdcfd28af648be2597624cac0e27 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 16 Sep 2022 13:20:54 +0100
-Subject: [PATCH] nvmem: prefix all symbols with NVMEM_
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This unifies all NVMEM symbols. They follow one style now.
-
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Acked-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220916122100.170016-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- arch/arm/configs/multi_v7_defconfig |  6 +++---
- arch/arm/configs/qcom_defconfig     |  2 +-
- arch/arm64/configs/defconfig        | 10 +++++-----
- arch/mips/configs/ci20_defconfig    |  2 +-
- drivers/cpufreq/Kconfig.arm         |  2 +-
- drivers/nvmem/Kconfig               | 24 ++++++++++++------------
- drivers/nvmem/Makefile              | 24 ++++++++++++------------
- drivers/soc/mediatek/Kconfig        |  2 +-
- drivers/thermal/qcom/Kconfig        |  2 +-
- 9 files changed, 37 insertions(+), 37 deletions(-)
-
---- a/arch/arm/configs/multi_v7_defconfig
-+++ b/arch/arm/configs/multi_v7_defconfig
-@@ -1085,10 +1085,10 @@ CONFIG_OMAP_USB2=y
- CONFIG_TI_PIPE3=y
- CONFIG_TWL4030_USB=m
- CONFIG_NVMEM_IMX_OCOTP=y
--CONFIG_ROCKCHIP_EFUSE=m
-+CONFIG_NVMEM_ROCKCHIP_EFUSE=m
- CONFIG_NVMEM_SUNXI_SID=y
- CONFIG_NVMEM_VF610_OCOTP=y
--CONFIG_MESON_MX_EFUSE=m
-+CONFIG_NVMEM_MESON_MX_EFUSE=m
- CONFIG_FSI=m
- CONFIG_FSI_MASTER_GPIO=m
- CONFIG_FSI_MASTER_HUB=m
---- a/arch/arm/configs/qcom_defconfig
-+++ b/arch/arm/configs/qcom_defconfig
-@@ -257,7 +257,7 @@ CONFIG_PHY_QCOM_APQ8064_SATA=y
- CONFIG_PHY_QCOM_IPQ806X_SATA=y
- CONFIG_PHY_QCOM_USB_HS=y
- CONFIG_PHY_QCOM_USB_HSIC=y
--CONFIG_QCOM_QFPROM=y
-+CONFIG_NVMEM_QCOM_QFPROM=y
- CONFIG_INTERCONNECT=y
- CONFIG_INTERCONNECT_QCOM=y
- CONFIG_INTERCONNECT_QCOM_MSM8974=m
---- a/arch/arm64/configs/defconfig
-+++ b/arch/arm64/configs/defconfig
-@@ -1022,11 +1022,11 @@ CONFIG_QCOM_L2_PMU=y
- CONFIG_QCOM_L3_PMU=y
- CONFIG_NVMEM_IMX_OCOTP=y
- CONFIG_NVMEM_IMX_OCOTP_SCU=y
--CONFIG_QCOM_QFPROM=y
--CONFIG_ROCKCHIP_EFUSE=y
-+CONFIG_NVMEM_QCOM_QFPROM=y
-+CONFIG_NVMEM_ROCKCHIP_EFUSE=y
- CONFIG_NVMEM_SUNXI_SID=y
--CONFIG_UNIPHIER_EFUSE=y
--CONFIG_MESON_EFUSE=m
-+CONFIG_NVMEM_UNIPHIER_EFUSE=y
-+CONFIG_NVMEM_MESON_EFUSE=m
- CONFIG_FPGA=y
- CONFIG_FPGA_MGR_STRATIX10_SOC=m
- CONFIG_FPGA_BRIDGE=m
---- a/drivers/cpufreq/Kconfig.arm
-+++ b/drivers/cpufreq/Kconfig.arm
-@@ -131,7 +131,7 @@ config ARM_OMAP2PLUS_CPUFREQ
- config ARM_QCOM_CPUFREQ_NVMEM
- 	tristate "Qualcomm nvmem based CPUFreq"
- 	depends on ARCH_QCOM
--	depends on QCOM_QFPROM
-+	depends on NVMEM_QCOM_QFPROM
- 	depends on QCOM_SMEM
- 	select PM_OPP
- 	help
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -52,7 +52,7 @@ config NVMEM_IMX_OCOTP_SCU
- 	  This is a driver for the SCU On-Chip OTP Controller (OCOTP)
- 	  available on i.MX8 SoCs.
- 
--config JZ4780_EFUSE
-+config NVMEM_JZ4780_EFUSE
- 	tristate "JZ4780 EFUSE Memory Support"
- 	depends on MACH_INGENIC || COMPILE_TEST
- 	depends on HAS_IOMEM
-@@ -96,7 +96,7 @@ config NVMEM_MXS_OCOTP
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem-mxs-ocotp.
- 
--config MTK_EFUSE
-+config NVMEM_MTK_EFUSE
- 	tristate "Mediatek SoCs EFUSE support"
- 	depends on ARCH_MEDIATEK || COMPILE_TEST
- 	depends on HAS_IOMEM
-@@ -107,7 +107,7 @@ config MTK_EFUSE
- 	  This driver can also be built as a module. If so, the module
- 	  will be called efuse-mtk.
- 
--config MICROCHIP_OTPC
-+config NVMEM_MICROCHIP_OTPC
- 	tristate "Microchip OTPC support"
- 	depends on ARCH_AT91 || COMPILE_TEST
- 	help
-@@ -126,7 +126,7 @@ config NVMEM_NINTENDO_OTP
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem-nintendo-otp.
- 
--config QCOM_QFPROM
-+config NVMEM_QCOM_QFPROM
- 	tristate "QCOM QFPROM Support"
- 	depends on ARCH_QCOM || COMPILE_TEST
- 	depends on HAS_IOMEM
-@@ -145,7 +145,7 @@ config NVMEM_SPMI_SDAM
- 	  Qualcomm Technologies, Inc. PMICs. It provides the clients
- 	  an interface to read/write to the SDAM module's shared memory.
- 
--config ROCKCHIP_EFUSE
-+config NVMEM_ROCKCHIP_EFUSE
- 	tristate "Rockchip eFuse Support"
- 	depends on ARCH_ROCKCHIP || COMPILE_TEST
- 	depends on HAS_IOMEM
-@@ -156,7 +156,7 @@ config ROCKCHIP_EFUSE
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem_rockchip_efuse.
- 
--config ROCKCHIP_OTP
-+config NVMEM_ROCKCHIP_OTP
- 	tristate "Rockchip OTP controller support"
- 	depends on ARCH_ROCKCHIP || COMPILE_TEST
- 	depends on HAS_IOMEM
-@@ -199,7 +199,7 @@ config NVMEM_SUNXI_SID
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem_sunxi_sid.
- 
--config UNIPHIER_EFUSE
-+config NVMEM_UNIPHIER_EFUSE
- 	tristate "UniPhier SoCs eFuse support"
- 	depends on ARCH_UNIPHIER || COMPILE_TEST
- 	depends on HAS_IOMEM
-@@ -221,7 +221,7 @@ config NVMEM_VF610_OCOTP
- 	  This driver can also be build as a module. If so, the module will
- 	  be called nvmem-vf610-ocotp.
- 
--config MESON_EFUSE
-+config NVMEM_MESON_EFUSE
- 	tristate "Amlogic Meson GX eFuse Support"
- 	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
- 	help
-@@ -231,7 +231,7 @@ config MESON_EFUSE
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem_meson_efuse.
- 
--config MESON_MX_EFUSE
-+config NVMEM_MESON_MX_EFUSE
- 	tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
- 	depends on ARCH_MESON || COMPILE_TEST
- 	help
-@@ -251,13 +251,13 @@ config NVMEM_SNVS_LPGPR
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem-snvs-lpgpr.
- 
--config RAVE_SP_EEPROM
-+config NVMEM_RAVE_SP_EEPROM
- 	tristate "Rave SP EEPROM Support"
- 	depends on RAVE_SP_CORE
- 	help
- 	  Say y here to enable Rave SP EEPROM support.
- 
--config SC27XX_EFUSE
-+config NVMEM_SC27XX_EFUSE
- 	tristate "Spreadtrum SC27XX eFuse Support"
- 	depends on MFD_SC27XX_PMIC || COMPILE_TEST
- 	depends on HAS_IOMEM
-@@ -278,7 +278,7 @@ config NVMEM_ZYNQMP
- 
- 	  If sure, say yes. If unsure, say no.
- 
--config SPRD_EFUSE
-+config NVMEM_SPRD_EFUSE
- 	tristate "Spreadtrum SoC eFuse Support"
- 	depends on ARCH_SPRD || COMPILE_TEST
- 	depends on HAS_IOMEM
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -15,7 +15,7 @@ obj-$(CONFIG_NVMEM_IMX_OCOTP)	+= nvmem-i
- nvmem-imx-ocotp-y		:= imx-ocotp.o
- obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU)	+= nvmem-imx-ocotp-scu.o
- nvmem-imx-ocotp-scu-y		:= imx-ocotp-scu.o
--obj-$(CONFIG_JZ4780_EFUSE)		+= nvmem_jz4780_efuse.o
-+obj-$(CONFIG_NVMEM_JZ4780_EFUSE)		+= nvmem_jz4780_efuse.o
- nvmem_jz4780_efuse-y		:= jz4780-efuse.o
- obj-$(CONFIG_NVMEM_LPC18XX_EEPROM)	+= nvmem_lpc18xx_eeprom.o
- nvmem_lpc18xx_eeprom-y	:= lpc18xx_eeprom.o
-@@ -25,37 +25,37 @@ obj-$(CONFIG_NVMEM_MXS_OCOTP)	+= nvmem-m
- nvmem-mxs-ocotp-y		:= mxs-ocotp.o
- obj-$(CONFIG_NVMEM_NINTENDO_OTP)	+= nvmem-nintendo-otp.o
- nvmem-nintendo-otp-y		:= nintendo-otp.o
--obj-$(CONFIG_MTK_EFUSE)		+= nvmem_mtk-efuse.o
-+obj-$(CONFIG_NVMEM_MTK_EFUSE)		+= nvmem_mtk-efuse.o
- nvmem_mtk-efuse-y		:= mtk-efuse.o
--obj-$(CONFIG_QCOM_QFPROM)	+= nvmem_qfprom.o
-+obj-$(CONFIG_NVMEM_QCOM_QFPROM)	+= nvmem_qfprom.o
- nvmem_qfprom-y			:= qfprom.o
- obj-$(CONFIG_NVMEM_SPMI_SDAM)	+= nvmem_qcom-spmi-sdam.o
- nvmem_qcom-spmi-sdam-y		+= qcom-spmi-sdam.o
--obj-$(CONFIG_ROCKCHIP_EFUSE)	+= nvmem_rockchip_efuse.o
-+obj-$(CONFIG_NVMEM_ROCKCHIP_EFUSE)	+= nvmem_rockchip_efuse.o
- nvmem_rockchip_efuse-y		:= rockchip-efuse.o
--obj-$(CONFIG_ROCKCHIP_OTP)	+= nvmem-rockchip-otp.o
-+obj-$(CONFIG_NVMEM_ROCKCHIP_OTP)	+= nvmem-rockchip-otp.o
- nvmem-rockchip-otp-y		:= rockchip-otp.o
- obj-$(CONFIG_NVMEM_SUNXI_SID)	+= nvmem_sunxi_sid.o
- nvmem_stm32_romem-y 		:= stm32-romem.o
- obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o
- nvmem_sunxi_sid-y		:= sunxi_sid.o
--obj-$(CONFIG_UNIPHIER_EFUSE)	+= nvmem-uniphier-efuse.o
-+obj-$(CONFIG_NVMEM_UNIPHIER_EFUSE)	+= nvmem-uniphier-efuse.o
- nvmem-uniphier-efuse-y		:= uniphier-efuse.o
- obj-$(CONFIG_NVMEM_VF610_OCOTP)	+= nvmem-vf610-ocotp.o
- nvmem-vf610-ocotp-y		:= vf610-ocotp.o
--obj-$(CONFIG_MESON_EFUSE)	+= nvmem_meson_efuse.o
-+obj-$(CONFIG_NVMEM_MESON_EFUSE)	+= nvmem_meson_efuse.o
- nvmem_meson_efuse-y		:= meson-efuse.o
--obj-$(CONFIG_MESON_MX_EFUSE)	+= nvmem_meson_mx_efuse.o
-+obj-$(CONFIG_NVMEM_MESON_MX_EFUSE)	+= nvmem_meson_mx_efuse.o
- nvmem_meson_mx_efuse-y		:= meson-mx-efuse.o
- obj-$(CONFIG_NVMEM_SNVS_LPGPR)	+= nvmem_snvs_lpgpr.o
- nvmem_snvs_lpgpr-y		:= snvs_lpgpr.o
--obj-$(CONFIG_RAVE_SP_EEPROM)	+= nvmem-rave-sp-eeprom.o
-+obj-$(CONFIG_NVMEM_RAVE_SP_EEPROM)	+= nvmem-rave-sp-eeprom.o
- nvmem-rave-sp-eeprom-y		:= rave-sp-eeprom.o
--obj-$(CONFIG_SC27XX_EFUSE)	+= nvmem-sc27xx-efuse.o
-+obj-$(CONFIG_NVMEM_SC27XX_EFUSE)	+= nvmem-sc27xx-efuse.o
- nvmem-sc27xx-efuse-y		:= sc27xx-efuse.o
- obj-$(CONFIG_NVMEM_ZYNQMP)	+= nvmem_zynqmp_nvmem.o
- nvmem_zynqmp_nvmem-y		:= zynqmp_nvmem.o
--obj-$(CONFIG_SPRD_EFUSE)	+= nvmem_sprd_efuse.o
-+obj-$(CONFIG_NVMEM_SPRD_EFUSE)	+= nvmem_sprd_efuse.o
- nvmem_sprd_efuse-y		:= sprd-efuse.o
- obj-$(CONFIG_NVMEM_RMEM) 	+= nvmem-rmem.o
- nvmem-rmem-y			:= rmem.o
-@@ -67,7 +67,7 @@ obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP)	+= nvm
- nvmem_sunplus_ocotp-y		:= sunplus-ocotp.o
- obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvmem-apple-efuses.o
- nvmem-apple-efuses-y 		:= apple-efuses.o
--obj-$(CONFIG_MICROCHIP_OTPC)	+= nvmem-microchip-otpc.o
-+obj-$(CONFIG_NVMEM_MICROCHIP_OTPC)	+= nvmem-microchip-otpc.o
- nvmem-microchip-otpc-y		:= microchip-otpc.o
- obj-$(CONFIG_NVMEM_U_BOOT_ENV)	+= nvmem_u-boot-env.o
- nvmem_u-boot-env-y		:= u-boot-env.o
---- a/drivers/thermal/qcom/Kconfig
-+++ b/drivers/thermal/qcom/Kconfig
-@@ -1,7 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0-only
- config QCOM_TSENS
- 	tristate "Qualcomm TSENS Temperature Alarm"
--	depends on QCOM_QFPROM
-+	depends on NVMEM_QCOM_QFPROM
- 	depends on ARCH_QCOM || COMPILE_TEST
- 	help
- 	  This enables the thermal sysfs driver for the TSENS device. It shows
diff --git a/target/linux/generic/backport-5.10/811-v6.1-0006-nvmem-sort-config-symbols-alphabetically.patch b/target/linux/generic/backport-5.10/811-v6.1-0006-nvmem-sort-config-symbols-alphabetically.patch
deleted file mode 100644
index 4e45524bffcd..000000000000
--- a/target/linux/generic/backport-5.10/811-v6.1-0006-nvmem-sort-config-symbols-alphabetically.patch
+++ /dev/null
@@ -1,535 +0,0 @@
-From a06d9e5a63b7c2f622c908cd9600ce735e70f7c6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 16 Sep 2022 13:20:55 +0100
-Subject: [PATCH] nvmem: sort config symbols alphabetically
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Match what most subsystems do
-2. Simplify maintenance a bit
-3. Reduce amount of conflicts for new drivers patches
-
-While at it unify indent level in Makefile.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220916122100.170016-9-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig  | 300 +++++++++++++++++++++--------------------
- drivers/nvmem/Makefile | 114 ++++++++--------
- 2 files changed, 208 insertions(+), 206 deletions(-)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -21,6 +21,40 @@ config NVMEM_SYSFS
- 	 This interface is mostly used by userspace applications to
- 	 read/write directly into nvmem.
- 
-+# Devices
-+
-+config NVMEM_APPLE_EFUSES
-+	tristate "Apple eFuse support"
-+	depends on ARCH_APPLE || COMPILE_TEST
-+	default ARCH_APPLE
-+	help
-+	  Say y here to enable support for reading eFuses on Apple SoCs
-+	  such as the M1. These are e.g. used to store factory programmed
-+	  calibration data required for the PCIe or the USB-C PHY.
-+
-+	  This driver can also be built as a module. If so, the module will
-+	  be called nvmem-apple-efuses.
-+
-+config NVMEM_BCM_OCOTP
-+	tristate "Broadcom On-Chip OTP Controller support"
-+	depends on ARCH_BCM_IPROC || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	default ARCH_BCM_IPROC
-+	help
-+	  Say y here to enable read/write access to the Broadcom OTP
-+	  controller.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called nvmem-bcm-ocotp.
-+
-+config NVMEM_BRCM_NVRAM
-+	tristate "Broadcom's NVRAM support"
-+	depends on ARCH_BCM_5301X || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	help
-+	  This driver provides support for Broadcom's NVRAM that can be accessed
-+	  using I/O mapping.
-+
- config NVMEM_IMX_IIM
- 	tristate "i.MX IC Identification Module support"
- 	depends on ARCH_MXC || COMPILE_TEST
-@@ -64,6 +98,19 @@ config NVMEM_JZ4780_EFUSE
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called nvmem_jz4780_efuse.
- 
-+config NVMEM_LAYERSCAPE_SFP
-+	tristate "Layerscape SFP (Security Fuse Processor) support"
-+	depends on ARCH_LAYERSCAPE || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	select REGMAP_MMIO
-+	help
-+	  This driver provides support to read the eFuses on Freescale
-+	  Layerscape SoC's. For example, the vendor provides a per part
-+	  unique ID there.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called layerscape-sfp.
-+
- config NVMEM_LPC18XX_EEPROM
- 	tristate "NXP LPC18XX EEPROM Memory Support"
- 	depends on ARCH_LPC18XX || COMPILE_TEST
-@@ -84,17 +131,32 @@ config NVMEM_LPC18XX_OTP
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called nvmem_lpc18xx_otp.
- 
--config NVMEM_MXS_OCOTP
--	tristate "Freescale MXS On-Chip OTP Memory Support"
--	depends on ARCH_MXS || COMPILE_TEST
--	depends on HAS_IOMEM
-+config NVMEM_MESON_EFUSE
-+	tristate "Amlogic Meson GX eFuse Support"
-+	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
- 	help
--	  If you say Y here, you will get readonly access to the
--	  One Time Programmable memory pages that are stored
--	  on the Freescale i.MX23/i.MX28 processor.
-+	  This is a driver to retrieve specific values from the eFuse found on
-+	  the Amlogic Meson GX SoCs.
- 
- 	  This driver can also be built as a module. If so, the module
--	  will be called nvmem-mxs-ocotp.
-+	  will be called nvmem_meson_efuse.
-+
-+config NVMEM_MESON_MX_EFUSE
-+	tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
-+	depends on ARCH_MESON || COMPILE_TEST
-+	help
-+	  This is a driver to retrieve specific values from the eFuse found on
-+	  the Amlogic Meson6, Meson8 and Meson8b SoCs.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called nvmem_meson_mx_efuse.
-+
-+config NVMEM_MICROCHIP_OTPC
-+	tristate "Microchip OTPC support"
-+	depends on ARCH_AT91 || COMPILE_TEST
-+	help
-+	  This driver enable the OTP controller available on Microchip SAMA7G5
-+	  SoCs. It controlls the access to the OTP memory connected to it.
- 
- config NVMEM_MTK_EFUSE
- 	tristate "Mediatek SoCs EFUSE support"
-@@ -107,12 +169,17 @@ config NVMEM_MTK_EFUSE
- 	  This driver can also be built as a module. If so, the module
- 	  will be called efuse-mtk.
- 
--config NVMEM_MICROCHIP_OTPC
--	tristate "Microchip OTPC support"
--	depends on ARCH_AT91 || COMPILE_TEST
-+config NVMEM_MXS_OCOTP
-+	tristate "Freescale MXS On-Chip OTP Memory Support"
-+	depends on ARCH_MXS || COMPILE_TEST
-+	depends on HAS_IOMEM
- 	help
--	  This driver enable the OTP controller available on Microchip SAMA7G5
--	  SoCs. It controlls the access to the OTP memory connected to it.
-+	  If you say Y here, you will get readonly access to the
-+	  One Time Programmable memory pages that are stored
-+	  on the Freescale i.MX23/i.MX28 processor.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called nvmem-mxs-ocotp.
- 
- config NVMEM_NINTENDO_OTP
- 	tristate "Nintendo Wii and Wii U OTP Support"
-@@ -137,13 +204,21 @@ config NVMEM_QCOM_QFPROM
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem_qfprom.
- 
--config NVMEM_SPMI_SDAM
--	tristate "SPMI SDAM Support"
--	depends on SPMI
-+config NVMEM_RAVE_SP_EEPROM
-+	tristate "Rave SP EEPROM Support"
-+	depends on RAVE_SP_CORE
- 	help
--	  This driver supports the Shared Direct Access Memory Module on
--	  Qualcomm Technologies, Inc. PMICs. It provides the clients
--	  an interface to read/write to the SDAM module's shared memory.
-+	  Say y here to enable Rave SP EEPROM support.
-+
-+config NVMEM_RMEM
-+	tristate "Reserved Memory Based Driver Support"
-+	depends on HAS_IOMEM
-+	help
-+	  This driver maps reserved memory into an nvmem device. It might be
-+	  useful to expose information left by firmware in memory.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called nvmem-rmem.
- 
- config NVMEM_ROCKCHIP_EFUSE
- 	tristate "Rockchip eFuse Support"
-@@ -167,79 +242,16 @@ config NVMEM_ROCKCHIP_OTP
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem_rockchip_otp.
- 
--config NVMEM_BCM_OCOTP
--	tristate "Broadcom On-Chip OTP Controller support"
--	depends on ARCH_BCM_IPROC || COMPILE_TEST
--	depends on HAS_IOMEM
--	default ARCH_BCM_IPROC
--	help
--	  Say y here to enable read/write access to the Broadcom OTP
--	  controller.
--
--	  This driver can also be built as a module. If so, the module
--	  will be called nvmem-bcm-ocotp.
--
--config NVMEM_STM32_ROMEM
--	tristate "STMicroelectronics STM32 factory-programmed memory support"
--	depends on ARCH_STM32 || COMPILE_TEST
--	help
--	  Say y here to enable read-only access for STMicroelectronics STM32
--	  factory-programmed memory area.
--
--	  This driver can also be built as a module. If so, the module
--	  will be called nvmem-stm32-romem.
--
--config NVMEM_SUNXI_SID
--	tristate "Allwinner SoCs SID support"
--	depends on ARCH_SUNXI
--	help
--	  This is a driver for the 'security ID' available on various Allwinner
--	  devices.
--
--	  This driver can also be built as a module. If so, the module
--	  will be called nvmem_sunxi_sid.
--
--config NVMEM_UNIPHIER_EFUSE
--	tristate "UniPhier SoCs eFuse support"
--	depends on ARCH_UNIPHIER || COMPILE_TEST
--	depends on HAS_IOMEM
--	help
--	  This is a simple driver to dump specified values of UniPhier SoC
--	  from eFuse.
--
--	  This driver can also be built as a module. If so, the module
--	  will be called nvmem-uniphier-efuse.
--
--config NVMEM_VF610_OCOTP
--	tristate "VF610 SoC OCOTP support"
--	depends on SOC_VF610 || COMPILE_TEST
-+config NVMEM_SC27XX_EFUSE
-+	tristate "Spreadtrum SC27XX eFuse Support"
-+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
- 	depends on HAS_IOMEM
- 	help
--	  This is a driver for the 'OCOTP' peripheral available on Vybrid
--	  devices like VF5xx and VF6xx.
--
--	  This driver can also be build as a module. If so, the module will
--	  be called nvmem-vf610-ocotp.
--
--config NVMEM_MESON_EFUSE
--	tristate "Amlogic Meson GX eFuse Support"
--	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
--	help
--	  This is a driver to retrieve specific values from the eFuse found on
--	  the Amlogic Meson GX SoCs.
--
--	  This driver can also be built as a module. If so, the module
--	  will be called nvmem_meson_efuse.
--
--config NVMEM_MESON_MX_EFUSE
--	tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
--	depends on ARCH_MESON || COMPILE_TEST
--	help
--	  This is a driver to retrieve specific values from the eFuse found on
--	  the Amlogic Meson6, Meson8 and Meson8b SoCs.
-+	  This is a simple driver to dump specified values of Spreadtrum
-+	  SC27XX PMICs from eFuse.
- 
- 	  This driver can also be built as a module. If so, the module
--	  will be called nvmem_meson_mx_efuse.
-+	  will be called nvmem-sc27xx-efuse.
- 
- config NVMEM_SNVS_LPGPR
- 	tristate "Support for Low Power General Purpose Register"
-@@ -251,32 +263,13 @@ config NVMEM_SNVS_LPGPR
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem-snvs-lpgpr.
- 
--config NVMEM_RAVE_SP_EEPROM
--	tristate "Rave SP EEPROM Support"
--	depends on RAVE_SP_CORE
--	help
--	  Say y here to enable Rave SP EEPROM support.
--
--config NVMEM_SC27XX_EFUSE
--	tristate "Spreadtrum SC27XX eFuse Support"
--	depends on MFD_SC27XX_PMIC || COMPILE_TEST
--	depends on HAS_IOMEM
--	help
--	  This is a simple driver to dump specified values of Spreadtrum
--	  SC27XX PMICs from eFuse.
--
--	  This driver can also be built as a module. If so, the module
--	  will be called nvmem-sc27xx-efuse.
--
--config NVMEM_ZYNQMP
--	bool "Xilinx ZYNQMP SoC nvmem firmware support"
--	depends on ARCH_ZYNQMP
-+config NVMEM_SPMI_SDAM
-+	tristate "SPMI SDAM Support"
-+	depends on SPMI
- 	help
--	  This is a driver to access hardware related data like
--	  soc revision, IDCODE... etc by using the firmware
--	  interface.
--
--	  If sure, say yes. If unsure, say no.
-+	  This driver supports the Shared Direct Access Memory Module on
-+	  Qualcomm Technologies, Inc. PMICs. It provides the clients
-+	  an interface to read/write to the SDAM module's shared memory.
- 
- config NVMEM_SPRD_EFUSE
- 	tristate "Spreadtrum SoC eFuse Support"
-@@ -289,36 +282,15 @@ config NVMEM_SPRD_EFUSE
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem-sprd-efuse.
- 
--config NVMEM_RMEM
--	tristate "Reserved Memory Based Driver Support"
--	depends on HAS_IOMEM
--	help
--	  This driver maps reserved memory into an nvmem device. It might be
--	  useful to expose information left by firmware in memory.
--
--	  This driver can also be built as a module. If so, the module
--	  will be called nvmem-rmem.
--
--config NVMEM_BRCM_NVRAM
--	tristate "Broadcom's NVRAM support"
--	depends on ARCH_BCM_5301X || COMPILE_TEST
--	depends on HAS_IOMEM
--	help
--	  This driver provides support for Broadcom's NVRAM that can be accessed
--	  using I/O mapping.
--
--config NVMEM_LAYERSCAPE_SFP
--	tristate "Layerscape SFP (Security Fuse Processor) support"
--	depends on ARCH_LAYERSCAPE || COMPILE_TEST
--	depends on HAS_IOMEM
--	select REGMAP_MMIO
-+config NVMEM_STM32_ROMEM
-+	tristate "STMicroelectronics STM32 factory-programmed memory support"
-+	depends on ARCH_STM32 || COMPILE_TEST
- 	help
--	  This driver provides support to read the eFuses on Freescale
--	  Layerscape SoC's. For example, the vendor provides a per part
--	  unique ID there.
-+	  Say y here to enable read-only access for STMicroelectronics STM32
-+	  factory-programmed memory area.
- 
- 	  This driver can also be built as a module. If so, the module
--	  will be called layerscape-sfp.
-+	  will be called nvmem-stm32-romem.
- 
- config NVMEM_SUNPLUS_OCOTP
- 	tristate "Sunplus SoC OTP support"
-@@ -332,17 +304,15 @@ config NVMEM_SUNPLUS_OCOTP
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem-sunplus-ocotp.
- 
--config NVMEM_APPLE_EFUSES
--	tristate "Apple eFuse support"
--	depends on ARCH_APPLE || COMPILE_TEST
--	default ARCH_APPLE
-+config NVMEM_SUNXI_SID
-+	tristate "Allwinner SoCs SID support"
-+	depends on ARCH_SUNXI
- 	help
--	  Say y here to enable support for reading eFuses on Apple SoCs
--	  such as the M1. These are e.g. used to store factory programmed
--	  calibration data required for the PCIe or the USB-C PHY.
-+	  This is a driver for the 'security ID' available on various Allwinner
-+	  devices.
- 
--	  This driver can also be built as a module. If so, the module will
--	  be called nvmem-apple-efuses.
-+	  This driver can also be built as a module. If so, the module
-+	  will be called nvmem_sunxi_sid.
- 
- config NVMEM_U_BOOT_ENV
- 	tristate "U-Boot environment variables support"
-@@ -357,4 +327,36 @@ config NVMEM_U_BOOT_ENV
- 
- 	  If compiled as module it will be called nvmem_u-boot-env.
- 
-+config NVMEM_UNIPHIER_EFUSE
-+	tristate "UniPhier SoCs eFuse support"
-+	depends on ARCH_UNIPHIER || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	help
-+	  This is a simple driver to dump specified values of UniPhier SoC
-+	  from eFuse.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called nvmem-uniphier-efuse.
-+
-+config NVMEM_VF610_OCOTP
-+	tristate "VF610 SoC OCOTP support"
-+	depends on SOC_VF610 || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	help
-+	  This is a driver for the 'OCOTP' peripheral available on Vybrid
-+	  devices like VF5xx and VF6xx.
-+
-+	  This driver can also be build as a module. If so, the module will
-+	  be called nvmem-vf610-ocotp.
-+
-+config NVMEM_ZYNQMP
-+	bool "Xilinx ZYNQMP SoC nvmem firmware support"
-+	depends on ARCH_ZYNQMP
-+	help
-+	  This is a driver to access hardware related data like
-+	  soc revision, IDCODE... etc by using the firmware
-+	  interface.
-+
-+	  If sure, say yes. If unsure, say no.
-+
- endif
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -7,67 +7,67 @@ obj-$(CONFIG_NVMEM)		+= nvmem_core.o
- nvmem_core-y			:= core.o
- 
- # Devices
--obj-$(CONFIG_NVMEM_BCM_OCOTP)	+= nvmem-bcm-ocotp.o
--nvmem-bcm-ocotp-y		:= bcm-ocotp.o
--obj-$(CONFIG_NVMEM_IMX_IIM)	+= nvmem-imx-iim.o
--nvmem-imx-iim-y			:= imx-iim.o
--obj-$(CONFIG_NVMEM_IMX_OCOTP)	+= nvmem-imx-ocotp.o
--nvmem-imx-ocotp-y		:= imx-ocotp.o
-+obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvmem-apple-efuses.o
-+nvmem-apple-efuses-y 			:= apple-efuses.o
-+obj-$(CONFIG_NVMEM_BCM_OCOTP)		+= nvmem-bcm-ocotp.o
-+nvmem-bcm-ocotp-y			:= bcm-ocotp.o
-+obj-$(CONFIG_NVMEM_BRCM_NVRAM)		+= nvmem_brcm_nvram.o
-+nvmem_brcm_nvram-y			:= brcm_nvram.o
-+obj-$(CONFIG_NVMEM_IMX_IIM)		+= nvmem-imx-iim.o
-+nvmem-imx-iim-y				:= imx-iim.o
-+obj-$(CONFIG_NVMEM_IMX_OCOTP)		+= nvmem-imx-ocotp.o
-+nvmem-imx-ocotp-y			:= imx-ocotp.o
- obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU)	+= nvmem-imx-ocotp-scu.o
--nvmem-imx-ocotp-scu-y		:= imx-ocotp-scu.o
--obj-$(CONFIG_NVMEM_JZ4780_EFUSE)		+= nvmem_jz4780_efuse.o
--nvmem_jz4780_efuse-y		:= jz4780-efuse.o
-+nvmem-imx-ocotp-scu-y			:= imx-ocotp-scu.o
-+obj-$(CONFIG_NVMEM_JZ4780_EFUSE)	+= nvmem_jz4780_efuse.o
-+nvmem_jz4780_efuse-y			:= jz4780-efuse.o
-+obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP)	+= nvmem-layerscape-sfp.o
-+nvmem-layerscape-sfp-y			:= layerscape-sfp.o
- obj-$(CONFIG_NVMEM_LPC18XX_EEPROM)	+= nvmem_lpc18xx_eeprom.o
--nvmem_lpc18xx_eeprom-y	:= lpc18xx_eeprom.o
--obj-$(CONFIG_NVMEM_LPC18XX_OTP)	+= nvmem_lpc18xx_otp.o
--nvmem_lpc18xx_otp-y		:= lpc18xx_otp.o
--obj-$(CONFIG_NVMEM_MXS_OCOTP)	+= nvmem-mxs-ocotp.o
--nvmem-mxs-ocotp-y		:= mxs-ocotp.o
--obj-$(CONFIG_NVMEM_NINTENDO_OTP)	+= nvmem-nintendo-otp.o
--nvmem-nintendo-otp-y		:= nintendo-otp.o
-+nvmem_lpc18xx_eeprom-y			:= lpc18xx_eeprom.o
-+obj-$(CONFIG_NVMEM_LPC18XX_OTP)		+= nvmem_lpc18xx_otp.o
-+nvmem_lpc18xx_otp-y			:= lpc18xx_otp.o
-+obj-$(CONFIG_NVMEM_MESON_EFUSE)		+= nvmem_meson_efuse.o
-+nvmem_meson_efuse-y			:= meson-efuse.o
-+obj-$(CONFIG_NVMEM_MESON_MX_EFUSE)	+= nvmem_meson_mx_efuse.o
-+nvmem_meson_mx_efuse-y			:= meson-mx-efuse.o
-+obj-$(CONFIG_NVMEM_MICROCHIP_OTPC)	+= nvmem-microchip-otpc.o
-+nvmem-microchip-otpc-y			:= microchip-otpc.o
- obj-$(CONFIG_NVMEM_MTK_EFUSE)		+= nvmem_mtk-efuse.o
--nvmem_mtk-efuse-y		:= mtk-efuse.o
--obj-$(CONFIG_NVMEM_QCOM_QFPROM)	+= nvmem_qfprom.o
--nvmem_qfprom-y			:= qfprom.o
--obj-$(CONFIG_NVMEM_SPMI_SDAM)	+= nvmem_qcom-spmi-sdam.o
--nvmem_qcom-spmi-sdam-y		+= qcom-spmi-sdam.o
-+nvmem_mtk-efuse-y			:= mtk-efuse.o
-+obj-$(CONFIG_NVMEM_MXS_OCOTP)		+= nvmem-mxs-ocotp.o
-+nvmem-mxs-ocotp-y			:= mxs-ocotp.o
-+obj-$(CONFIG_NVMEM_NINTENDO_OTP)	+= nvmem-nintendo-otp.o
-+nvmem-nintendo-otp-y			:= nintendo-otp.o
-+obj-$(CONFIG_NVMEM_QCOM_QFPROM)		+= nvmem_qfprom.o
-+nvmem_qfprom-y				:= qfprom.o
-+obj-$(CONFIG_NVMEM_RAVE_SP_EEPROM)	+= nvmem-rave-sp-eeprom.o
-+nvmem-rave-sp-eeprom-y			:= rave-sp-eeprom.o
-+obj-$(CONFIG_NVMEM_RMEM) 		+= nvmem-rmem.o
-+nvmem-rmem-y				:= rmem.o
- obj-$(CONFIG_NVMEM_ROCKCHIP_EFUSE)	+= nvmem_rockchip_efuse.o
--nvmem_rockchip_efuse-y		:= rockchip-efuse.o
-+nvmem_rockchip_efuse-y			:= rockchip-efuse.o
- obj-$(CONFIG_NVMEM_ROCKCHIP_OTP)	+= nvmem-rockchip-otp.o
--nvmem-rockchip-otp-y		:= rockchip-otp.o
--obj-$(CONFIG_NVMEM_SUNXI_SID)	+= nvmem_sunxi_sid.o
--nvmem_stm32_romem-y 		:= stm32-romem.o
--obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o
--nvmem_sunxi_sid-y		:= sunxi_sid.o
--obj-$(CONFIG_NVMEM_UNIPHIER_EFUSE)	+= nvmem-uniphier-efuse.o
--nvmem-uniphier-efuse-y		:= uniphier-efuse.o
--obj-$(CONFIG_NVMEM_VF610_OCOTP)	+= nvmem-vf610-ocotp.o
--nvmem-vf610-ocotp-y		:= vf610-ocotp.o
--obj-$(CONFIG_NVMEM_MESON_EFUSE)	+= nvmem_meson_efuse.o
--nvmem_meson_efuse-y		:= meson-efuse.o
--obj-$(CONFIG_NVMEM_MESON_MX_EFUSE)	+= nvmem_meson_mx_efuse.o
--nvmem_meson_mx_efuse-y		:= meson-mx-efuse.o
--obj-$(CONFIG_NVMEM_SNVS_LPGPR)	+= nvmem_snvs_lpgpr.o
--nvmem_snvs_lpgpr-y		:= snvs_lpgpr.o
--obj-$(CONFIG_NVMEM_RAVE_SP_EEPROM)	+= nvmem-rave-sp-eeprom.o
--nvmem-rave-sp-eeprom-y		:= rave-sp-eeprom.o
-+nvmem-rockchip-otp-y			:= rockchip-otp.o
- obj-$(CONFIG_NVMEM_SC27XX_EFUSE)	+= nvmem-sc27xx-efuse.o
--nvmem-sc27xx-efuse-y		:= sc27xx-efuse.o
--obj-$(CONFIG_NVMEM_ZYNQMP)	+= nvmem_zynqmp_nvmem.o
--nvmem_zynqmp_nvmem-y		:= zynqmp_nvmem.o
--obj-$(CONFIG_NVMEM_SPRD_EFUSE)	+= nvmem_sprd_efuse.o
--nvmem_sprd_efuse-y		:= sprd-efuse.o
--obj-$(CONFIG_NVMEM_RMEM) 	+= nvmem-rmem.o
--nvmem-rmem-y			:= rmem.o
--obj-$(CONFIG_NVMEM_BRCM_NVRAM)	+= nvmem_brcm_nvram.o
--nvmem_brcm_nvram-y		:= brcm_nvram.o
--obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP)	+= nvmem-layerscape-sfp.o
--nvmem-layerscape-sfp-y		:= layerscape-sfp.o
-+nvmem-sc27xx-efuse-y			:= sc27xx-efuse.o
-+obj-$(CONFIG_NVMEM_SNVS_LPGPR)		+= nvmem_snvs_lpgpr.o
-+nvmem_snvs_lpgpr-y			:= snvs_lpgpr.o
-+obj-$(CONFIG_NVMEM_SPMI_SDAM)		+= nvmem_qcom-spmi-sdam.o
-+nvmem_qcom-spmi-sdam-y			+= qcom-spmi-sdam.o
-+obj-$(CONFIG_NVMEM_SPRD_EFUSE)		+= nvmem_sprd_efuse.o
-+nvmem_sprd_efuse-y			:= sprd-efuse.o
-+obj-$(CONFIG_NVMEM_STM32_ROMEM)		+= nvmem_stm32_romem.o
-+nvmem_stm32_romem-y 			:= stm32-romem.o
- obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP)	+= nvmem_sunplus_ocotp.o
--nvmem_sunplus_ocotp-y		:= sunplus-ocotp.o
--obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvmem-apple-efuses.o
--nvmem-apple-efuses-y 		:= apple-efuses.o
--obj-$(CONFIG_NVMEM_MICROCHIP_OTPC)	+= nvmem-microchip-otpc.o
--nvmem-microchip-otpc-y		:= microchip-otpc.o
--obj-$(CONFIG_NVMEM_U_BOOT_ENV)	+= nvmem_u-boot-env.o
--nvmem_u-boot-env-y		:= u-boot-env.o
-+nvmem_sunplus_ocotp-y			:= sunplus-ocotp.o
-+obj-$(CONFIG_NVMEM_SUNXI_SID)		+= nvmem_sunxi_sid.o
-+nvmem_sunxi_sid-y			:= sunxi_sid.o
-+obj-$(CONFIG_NVMEM_U_BOOT_ENV)		+= nvmem_u-boot-env.o
-+nvmem_u-boot-env-y			:= u-boot-env.o
-+obj-$(CONFIG_NVMEM_UNIPHIER_EFUSE)	+= nvmem-uniphier-efuse.o
-+nvmem-uniphier-efuse-y			:= uniphier-efuse.o
-+obj-$(CONFIG_NVMEM_VF610_OCOTP)		+= nvmem-vf610-ocotp.o
-+nvmem-vf610-ocotp-y			:= vf610-ocotp.o
-+obj-$(CONFIG_NVMEM_ZYNQMP)		+= nvmem_zynqmp_nvmem.o
-+nvmem_zynqmp_nvmem-y			:= zynqmp_nvmem.o
diff --git a/target/linux/generic/backport-5.10/811-v6.1-0007-nvmem-u-boot-env-find-Device-Tree-nodes-for-NVMEM-ce.patch b/target/linux/generic/backport-5.10/811-v6.1-0007-nvmem-u-boot-env-find-Device-Tree-nodes-for-NVMEM-ce.patch
deleted file mode 100644
index e0a082adc45e..000000000000
--- a/target/linux/generic/backport-5.10/811-v6.1-0007-nvmem-u-boot-env-find-Device-Tree-nodes-for-NVMEM-ce.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From d4d432670f7dee0a5432fcffcfc8699b25181ace Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 16 Sep 2022 13:20:57 +0100
-Subject: [PATCH] nvmem: u-boot-env: find Device Tree nodes for NVMEM cells
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-DT binding allows specifying NVMEM cells as NVMEM device (provider)
-subnodes. Looks for such subnodes when building NVMEM cells.
-
-This allows NVMEM consumers to use U-Boot environment variables.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220916122100.170016-11-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/u-boot-env.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -92,6 +92,7 @@ static int u_boot_env_add_cells(struct u
- 			return -ENOMEM;
- 		priv->cells[idx].offset = data_offset + value - data;
- 		priv->cells[idx].bytes = strlen(value);
-+		priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
- 	}
- 
- 	if (WARN_ON(idx != priv->ncells))
diff --git a/target/linux/generic/backport-5.10/811-v6.1-0008-nvmem-lan9662-otp-add-support.patch b/target/linux/generic/backport-5.10/811-v6.1-0008-nvmem-lan9662-otp-add-support.patch
deleted file mode 100644
index 945c6128ff49..000000000000
--- a/target/linux/generic/backport-5.10/811-v6.1-0008-nvmem-lan9662-otp-add-support.patch
+++ /dev/null
@@ -1,274 +0,0 @@
-From 9e8f208ad5229ddda97cd4a83ecf89c735d99592 Mon Sep 17 00:00:00 2001
-From: Horatiu Vultur <horatiu.vultur@microchip.com>
-Date: Fri, 16 Sep 2022 13:20:59 +0100
-Subject: [PATCH] nvmem: lan9662-otp: add support
-
-Add support for OTP controller available on LAN9662. The OTPC controls
-the access to a non-volatile memory. The size of the memory is 8KB.
-The OTPC can access the memory based on an offset.
-Implement both the read and the write functionality.
-
-Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220916122100.170016-13-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig        |   8 ++
- drivers/nvmem/Makefile       |   2 +
- drivers/nvmem/lan9662-otpc.c | 222 +++++++++++++++++++++++++++++++++++
- 3 files changed, 232 insertions(+)
- create mode 100644 drivers/nvmem/lan9662-otpc.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -98,6 +98,14 @@ config NVMEM_JZ4780_EFUSE
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called nvmem_jz4780_efuse.
- 
-+config NVMEM_LAN9662_OTPC
-+	tristate "Microchip LAN9662 OTP controller support"
-+	depends on SOC_LAN966 || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	help
-+	  This driver enables the OTP controller available on Microchip LAN9662
-+	  SoCs. It controls the access to the OTP memory connected to it.
-+
- config NVMEM_LAYERSCAPE_SFP
- 	tristate "Layerscape SFP (Security Fuse Processor) support"
- 	depends on ARCH_LAYERSCAPE || COMPILE_TEST
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -21,6 +21,8 @@ obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU)	+= nvm
- nvmem-imx-ocotp-scu-y			:= imx-ocotp-scu.o
- obj-$(CONFIG_NVMEM_JZ4780_EFUSE)	+= nvmem_jz4780_efuse.o
- nvmem_jz4780_efuse-y			:= jz4780-efuse.o
-+obj-$(CONFIG_NVMEM_LAN9662_OTPC)	+= nvmem-lan9662-otpc.o
-+nvmem-lan9662-otpc-y		:= lan9662-otpc.o
- obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP)	+= nvmem-layerscape-sfp.o
- nvmem-layerscape-sfp-y			:= layerscape-sfp.o
- obj-$(CONFIG_NVMEM_LPC18XX_EEPROM)	+= nvmem_lpc18xx_eeprom.o
---- /dev/null
-+++ b/drivers/nvmem/lan9662-otpc.c
-@@ -0,0 +1,222 @@
-+// SPDX-License-Identifier: GPL-2.0
-+
-+#include <linux/iopoll.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+
-+#define OTP_OTP_PWR_DN(t)			(t + 0x00)
-+#define OTP_OTP_PWR_DN_OTP_PWRDN_N		BIT(0)
-+#define OTP_OTP_ADDR_HI(t)			(t + 0x04)
-+#define OTP_OTP_ADDR_LO(t)			(t + 0x08)
-+#define OTP_OTP_PRGM_DATA(t)			(t + 0x10)
-+#define OTP_OTP_PRGM_MODE(t)			(t + 0x14)
-+#define OTP_OTP_PRGM_MODE_OTP_PGM_MODE_BYTE	BIT(0)
-+#define OTP_OTP_RD_DATA(t)			(t + 0x18)
-+#define OTP_OTP_FUNC_CMD(t)			(t + 0x20)
-+#define OTP_OTP_FUNC_CMD_OTP_PROGRAM		BIT(1)
-+#define OTP_OTP_FUNC_CMD_OTP_READ		BIT(0)
-+#define OTP_OTP_CMD_GO(t)			(t + 0x28)
-+#define OTP_OTP_CMD_GO_OTP_GO			BIT(0)
-+#define OTP_OTP_PASS_FAIL(t)			(t + 0x2c)
-+#define OTP_OTP_PASS_FAIL_OTP_READ_PROHIBITED	BIT(3)
-+#define OTP_OTP_PASS_FAIL_OTP_WRITE_PROHIBITED	BIT(2)
-+#define OTP_OTP_PASS_FAIL_OTP_FAIL		BIT(0)
-+#define OTP_OTP_STATUS(t)			(t + 0x30)
-+#define OTP_OTP_STATUS_OTP_CPUMPEN		BIT(1)
-+#define OTP_OTP_STATUS_OTP_BUSY			BIT(0)
-+
-+#define OTP_MEM_SIZE 8192
-+#define OTP_SLEEP_US 10
-+#define OTP_TIMEOUT_US 500000
-+
-+struct lan9662_otp {
-+	struct device *dev;
-+	void __iomem *base;
-+};
-+
-+static bool lan9662_otp_wait_flag_clear(void __iomem *reg, u32 flag)
-+{
-+	u32 val;
-+
-+	return readl_poll_timeout(reg, val, !(val & flag),
-+				  OTP_SLEEP_US, OTP_TIMEOUT_US);
-+}
-+
-+static int lan9662_otp_power(struct lan9662_otp *otp, bool up)
-+{
-+	void __iomem *pwrdn = OTP_OTP_PWR_DN(otp->base);
-+
-+	if (up) {
-+		writel(readl(pwrdn) & ~OTP_OTP_PWR_DN_OTP_PWRDN_N, pwrdn);
-+		if (lan9662_otp_wait_flag_clear(OTP_OTP_STATUS(otp->base),
-+						OTP_OTP_STATUS_OTP_CPUMPEN))
-+			return -ETIMEDOUT;
-+	} else {
-+		writel(readl(pwrdn) | OTP_OTP_PWR_DN_OTP_PWRDN_N, pwrdn);
-+	}
-+
-+	return 0;
-+}
-+
-+static int lan9662_otp_execute(struct lan9662_otp *otp)
-+{
-+	if (lan9662_otp_wait_flag_clear(OTP_OTP_CMD_GO(otp->base),
-+					OTP_OTP_CMD_GO_OTP_GO))
-+		return -ETIMEDOUT;
-+
-+	if (lan9662_otp_wait_flag_clear(OTP_OTP_STATUS(otp->base),
-+					OTP_OTP_STATUS_OTP_BUSY))
-+		return -ETIMEDOUT;
-+
-+	return 0;
-+}
-+
-+static void lan9662_otp_set_address(struct lan9662_otp *otp, u32 offset)
-+{
-+	writel(0xff & (offset >> 8), OTP_OTP_ADDR_HI(otp->base));
-+	writel(0xff & offset, OTP_OTP_ADDR_LO(otp->base));
-+}
-+
-+static int lan9662_otp_read_byte(struct lan9662_otp *otp, u32 offset, u8 *dst)
-+{
-+	u32 pass;
-+	int rc;
-+
-+	lan9662_otp_set_address(otp, offset);
-+	writel(OTP_OTP_FUNC_CMD_OTP_READ, OTP_OTP_FUNC_CMD(otp->base));
-+	writel(OTP_OTP_CMD_GO_OTP_GO, OTP_OTP_CMD_GO(otp->base));
-+	rc = lan9662_otp_execute(otp);
-+	if (!rc) {
-+		pass = readl(OTP_OTP_PASS_FAIL(otp->base));
-+		if (pass & OTP_OTP_PASS_FAIL_OTP_READ_PROHIBITED)
-+			return -EACCES;
-+		*dst = (u8) readl(OTP_OTP_RD_DATA(otp->base));
-+	}
-+	return rc;
-+}
-+
-+static int lan9662_otp_write_byte(struct lan9662_otp *otp, u32 offset, u8 data)
-+{
-+	u32 pass;
-+	int rc;
-+
-+	lan9662_otp_set_address(otp, offset);
-+	writel(OTP_OTP_PRGM_MODE_OTP_PGM_MODE_BYTE, OTP_OTP_PRGM_MODE(otp->base));
-+	writel(data, OTP_OTP_PRGM_DATA(otp->base));
-+	writel(OTP_OTP_FUNC_CMD_OTP_PROGRAM, OTP_OTP_FUNC_CMD(otp->base));
-+	writel(OTP_OTP_CMD_GO_OTP_GO, OTP_OTP_CMD_GO(otp->base));
-+
-+	rc = lan9662_otp_execute(otp);
-+	if (!rc) {
-+		pass = readl(OTP_OTP_PASS_FAIL(otp->base));
-+		if (pass & OTP_OTP_PASS_FAIL_OTP_WRITE_PROHIBITED)
-+			return -EACCES;
-+		if (pass & OTP_OTP_PASS_FAIL_OTP_FAIL)
-+			return -EIO;
-+	}
-+	return rc;
-+}
-+
-+static int lan9662_otp_read(void *context, unsigned int offset,
-+			    void *_val, size_t bytes)
-+{
-+	struct lan9662_otp *otp = context;
-+	u8 *val = _val;
-+	uint8_t data;
-+	int i, rc = 0;
-+
-+	lan9662_otp_power(otp, true);
-+	for (i = 0; i < bytes; i++) {
-+		rc = lan9662_otp_read_byte(otp, offset + i, &data);
-+		if (rc < 0)
-+			break;
-+		*val++ = data;
-+	}
-+	lan9662_otp_power(otp, false);
-+
-+	return rc;
-+}
-+
-+static int lan9662_otp_write(void *context, unsigned int offset,
-+			     void *_val, size_t bytes)
-+{
-+	struct lan9662_otp *otp = context;
-+	u8 *val = _val;
-+	u8 data, newdata;
-+	int i, rc = 0;
-+
-+	lan9662_otp_power(otp, true);
-+	for (i = 0; i < bytes; i++) {
-+		/* Skip zero bytes */
-+		if (val[i]) {
-+			rc = lan9662_otp_read_byte(otp, offset + i, &data);
-+			if (rc < 0)
-+				break;
-+
-+			newdata = data | val[i];
-+			if (newdata == data)
-+				continue;
-+
-+			rc = lan9662_otp_write_byte(otp, offset + i,
-+						      newdata);
-+			if (rc < 0)
-+				break;
-+		}
-+	}
-+	lan9662_otp_power(otp, false);
-+
-+	return rc;
-+}
-+
-+static struct nvmem_config otp_config = {
-+	.name = "lan9662-otp",
-+	.stride = 1,
-+	.word_size = 1,
-+	.reg_read = lan9662_otp_read,
-+	.reg_write = lan9662_otp_write,
-+	.size = OTP_MEM_SIZE,
-+};
-+
-+static int lan9662_otp_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct nvmem_device *nvmem;
-+	struct lan9662_otp *otp;
-+
-+	otp = devm_kzalloc(&pdev->dev, sizeof(*otp), GFP_KERNEL);
-+	if (!otp)
-+		return -ENOMEM;
-+
-+	otp->dev = dev;
-+	otp->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(otp->base))
-+		return PTR_ERR(otp->base);
-+
-+	otp_config.priv = otp;
-+	otp_config.dev = dev;
-+
-+	nvmem = devm_nvmem_register(dev, &otp_config);
-+
-+	return PTR_ERR_OR_ZERO(nvmem);
-+}
-+
-+static const struct of_device_id lan9662_otp_match[] = {
-+	{ .compatible = "microchip,lan9662-otp", },
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(of, lan9662_otp_match);
-+
-+static struct platform_driver lan9662_otp_driver = {
-+	.probe = lan9662_otp_probe,
-+	.driver = {
-+		.name = "lan9662-otp",
-+		.of_match_table = lan9662_otp_match,
-+	},
-+};
-+module_platform_driver(lan9662_otp_driver);
-+
-+MODULE_AUTHOR("Horatiu Vultur <horatiu.vultur@microchip.com>");
-+MODULE_DESCRIPTION("lan9662 OTP driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-5.10/811-v6.1-0009-nvmem-u-boot-env-fix-crc32-casting-type.patch b/target/linux/generic/backport-5.10/811-v6.1-0009-nvmem-u-boot-env-fix-crc32-casting-type.patch
deleted file mode 100644
index 633a668a962f..000000000000
--- a/target/linux/generic/backport-5.10/811-v6.1-0009-nvmem-u-boot-env-fix-crc32-casting-type.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 3717ca3e0cc8683f93b41d3f06ca79631eb58715 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 16 Sep 2022 13:21:00 +0100
-Subject: [PATCH] nvmem: u-boot-env: fix crc32 casting type
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes:
-drivers/nvmem/u-boot-env.c:141:17: sparse: sparse: cast to restricted __le32
-
-Fixes: d5542923f200 ("nvmem: add driver handling U-Boot environment variables")
-Reported-by: kernel test robot <lkp@intel.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20220916122100.170016-14-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/u-boot-env.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -139,7 +139,7 @@ static int u_boot_env_parse(struct u_boo
- 		data_offset = offsetof(struct u_boot_env_image_redundant, data);
- 		break;
- 	}
--	crc32 = le32_to_cpu(*(uint32_t *)(buf + crc32_offset));
-+	crc32 = le32_to_cpu(*(__le32 *)(buf + crc32_offset));
- 	crc32_data_len = priv->mtd->size - crc32_data_offset;
- 	data_len = priv->mtd->size - data_offset;
- 
diff --git a/target/linux/generic/backport-5.10/811-v6.1-0010-nvmem-lan9662-otp-Fix-compatible-string.patch b/target/linux/generic/backport-5.10/811-v6.1-0010-nvmem-lan9662-otp-Fix-compatible-string.patch
deleted file mode 100644
index b663a1328df3..000000000000
--- a/target/linux/generic/backport-5.10/811-v6.1-0010-nvmem-lan9662-otp-Fix-compatible-string.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 1aeb122d214b92474c86fde00a03d6e2d69381b5 Mon Sep 17 00:00:00 2001
-From: Horatiu Vultur <horatiu.vultur@microchip.com>
-Date: Wed, 28 Sep 2022 21:51:12 +0200
-Subject: [PATCH] nvmem: lan9662-otp: Fix compatible string
-
-The device tree bindings for lan9662-otp expects the compatible string
-to be one of following compatible strings:
-microchip,lan9662-otpc
-microchip,lan9668-otpc
-
-The problem is that the lan9662-otp driver contains the
-microchip,lan9662-otp compatible string instead of
-microchip,lan9662-otpc.
-Fix this by updating the compatible string in the driver.
-
-Fixes: 9e8f208ad5229d ("nvmem: lan9662-otp: add support")
-Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
-Link: https://lore.kernel.org/r/20220928195112.630351-1-horatiu.vultur@microchip.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/lan9662-otpc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/lan9662-otpc.c
-+++ b/drivers/nvmem/lan9662-otpc.c
-@@ -203,7 +203,7 @@ static int lan9662_otp_probe(struct plat
- }
- 
- static const struct of_device_id lan9662_otp_match[] = {
--	{ .compatible = "microchip,lan9662-otp", },
-+	{ .compatible = "microchip,lan9662-otpc", },
- 	{ },
- };
- MODULE_DEVICE_TABLE(of, lan9662_otp_match);
diff --git a/target/linux/generic/backport-5.10/811-v6.1-0011-nvmem-u-boot-env-fix-crc32_data_offset-on-redundant-.patch b/target/linux/generic/backport-5.10/811-v6.1-0011-nvmem-u-boot-env-fix-crc32_data_offset-on-redundant-.patch
deleted file mode 100644
index 967e891dbd9c..000000000000
--- a/target/linux/generic/backport-5.10/811-v6.1-0011-nvmem-u-boot-env-fix-crc32_data_offset-on-redundant-.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From ee424f7d3960152f5f862bbb6943e59828dc7917 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Fri, 4 Nov 2022 17:52:03 +0100
-Subject: [PATCH] nvmem: u-boot-env: fix crc32_data_offset on redundant
- u-boot-env
-
-The Western Digital MyBook Live (PowerPC 464/APM82181)
-has a set of redundant u-boot-env. Loading up the driver
-the following error:
-
-| u_boot_env: Invalid calculated CRC32: 0x4f8f2c86 (expected: 0x98b14514)
-| u_boot_env: probe of partition@1e000 failed with error -22
-
-Looking up the userspace libubootenv utilities source [0],
-it looks like the "mark" or "flag" is not part of the
-crc32 sum... which is unfortunate :(
-
-|static int libuboot_load(struct uboot_ctx *ctx)
-|{
-|[...]
-|       if (ctx->redundant) {
-|		[...]
-|               offsetdata = offsetof(struct uboot_env_redund, data);
-|		[...]					//-----^^
-|       }
-|       usable_envsize = ctx->size - offsetdata;
-|       buf[0] = malloc(bufsize);
-|[...]
-|	for (i = 0; i < copies; i++) {
-|		data = (uint8_t *)(buf[i] + offsetdata);
-|               uint32_t crc;
-|
-|		ret = devread(ctx, i, buf[i]);
-|		[...]
-|		crc = *(uint32_t *)(buf[i] + offsetcrc);
-|               dev->crc = crc32(0, (uint8_t *)data, usable_envsize);
-|
-
-[0] https://github.com/sbabic/libubootenv/blob/master/src/uboot_env.c#L951
-
-Fixes: d5542923f200 ("nvmem: add driver handling U-Boot environment variables")
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Link: https://lore.kernel.org/r/70a16eae113e08db2390b76e174f4837caa135c3.1667580636.git.chunkeey@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/u-boot-env.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -135,7 +135,7 @@ static int u_boot_env_parse(struct u_boo
- 		break;
- 	case U_BOOT_FORMAT_REDUNDANT:
- 		crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32);
--		crc32_data_offset = offsetof(struct u_boot_env_image_redundant, mark);
-+		crc32_data_offset = offsetof(struct u_boot_env_image_redundant, data);
- 		data_offset = offsetof(struct u_boot_env_image_redundant, data);
- 		break;
- 	}
diff --git a/target/linux/generic/backport-5.10/811-v6.1-0012-nvmem-rmem-Fix-return-value-check-in-rmem_read.patch b/target/linux/generic/backport-5.10/811-v6.1-0012-nvmem-rmem-Fix-return-value-check-in-rmem_read.patch
deleted file mode 100644
index b0e1b0c21969..000000000000
--- a/target/linux/generic/backport-5.10/811-v6.1-0012-nvmem-rmem-Fix-return-value-check-in-rmem_read.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 58e92c4a496b27156020a59a98c7f4a92c2b1533 Mon Sep 17 00:00:00 2001
-From: Wei Yongjun <weiyongjun1@huawei.com>
-Date: Fri, 18 Nov 2022 06:38:38 +0000
-Subject: [PATCH] nvmem: rmem: Fix return value check in rmem_read()
-
-In case of error, the function memremap() returns NULL pointer
-not ERR_PTR(). The IS_ERR() test in the return value check
-should be replaced with NULL test.
-
-Fixes: 5a3fa75a4d9c ("nvmem: Add driver to expose reserved memory as nvmem")
-Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
-Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063840.6357-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/rmem.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/nvmem/rmem.c
-+++ b/drivers/nvmem/rmem.c
-@@ -37,9 +37,9 @@ static int rmem_read(void *context, unsi
- 	 * but as of Dec 2020 this isn't possible on arm64.
- 	 */
- 	addr = memremap(priv->mem->base, available, MEMREMAP_WB);
--	if (IS_ERR(addr)) {
-+	if (!addr) {
- 		dev_err(priv->dev, "Failed to remap memory region\n");
--		return PTR_ERR(addr);
-+		return -ENOMEM;
- 	}
- 
- 	count = memory_read_from_buffer(val, bytes, &off, addr, available);
diff --git a/target/linux/generic/backport-5.10/811-v6.1-0013-nvmem-lan9662-otp-Change-return-type-of-lan9662_otp_.patch b/target/linux/generic/backport-5.10/811-v6.1-0013-nvmem-lan9662-otp-Change-return-type-of-lan9662_otp_.patch
deleted file mode 100644
index 0c842f079321..000000000000
--- a/target/linux/generic/backport-5.10/811-v6.1-0013-nvmem-lan9662-otp-Change-return-type-of-lan9662_otp_.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 022b68f271de0e53024e6d5e96fee8e76d25eb95 Mon Sep 17 00:00:00 2001
-From: Horatiu Vultur <horatiu.vultur@microchip.com>
-Date: Fri, 18 Nov 2022 06:38:40 +0000
-Subject: [PATCH] nvmem: lan9662-otp: Change return type of
- lan9662_otp_wait_flag_clear()
-
-The blamed commit introduced the following smatch warning in the
-function lan9662_otp_wait_flag_clear:
-drivers/nvmem/lan9662-otpc.c:43 lan9662_otp_wait_flag_clear() warn: signedness bug returning '(-110)'
-
-Fix this by changing the return type of the function
-lan9662_otp_wait_flag_clear() to be int instead of bool.
-
-Fixes: 9e8f208ad5229d ("nvmem: lan9662-otp: add support")
-Reported-by: kernel test robot <lkp@intel.com>
-Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
-Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063840.6357-5-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/lan9662-otpc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/lan9662-otpc.c
-+++ b/drivers/nvmem/lan9662-otpc.c
-@@ -36,7 +36,7 @@ struct lan9662_otp {
- 	void __iomem *base;
- };
- 
--static bool lan9662_otp_wait_flag_clear(void __iomem *reg, u32 flag)
-+static int lan9662_otp_wait_flag_clear(void __iomem *reg, u32 flag)
- {
- 	u32 val;
- 
diff --git a/target/linux/generic/backport-5.10/812-v6.2-0001-nvmem-stm32-move-STM32MP15_BSEC_NUM_LOWER-in-config.patch b/target/linux/generic/backport-5.10/812-v6.2-0001-nvmem-stm32-move-STM32MP15_BSEC_NUM_LOWER-in-config.patch
deleted file mode 100644
index 33759632ebe4..000000000000
--- a/target/linux/generic/backport-5.10/812-v6.2-0001-nvmem-stm32-move-STM32MP15_BSEC_NUM_LOWER-in-config.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From fbfc4ca465a1f8d81bf2d67d95bf7fc67c3cf0c2 Mon Sep 17 00:00:00 2001
-From: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Date: Fri, 18 Nov 2022 06:39:20 +0000
-Subject: [PATCH] nvmem: stm32: move STM32MP15_BSEC_NUM_LOWER in config
-
-Support STM32MP15_BSEC_NUM_LOWER in stm32 romem config to prepare
-the next SoC in STM32MP family.
-
-Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063932.6418-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 21 ++++++++++++++++-----
- 1 file changed, 16 insertions(+), 5 deletions(-)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -22,16 +22,15 @@
- /* shadow registers offest */
- #define STM32MP15_BSEC_DATA0		0x200
- 
--/* 32 (x 32-bits) lower shadow registers */
--#define STM32MP15_BSEC_NUM_LOWER	32
--
- struct stm32_romem_cfg {
- 	int size;
-+	u8 lower;
- };
- 
- struct stm32_romem_priv {
- 	void __iomem *base;
- 	struct nvmem_config cfg;
-+	u8 lower;
- };
- 
- static int stm32_romem_read(void *context, unsigned int offset, void *buf,
-@@ -85,7 +84,7 @@ static int stm32_bsec_read(void *context
- 	for (i = roffset; (i < roffset + rbytes); i += 4) {
- 		u32 otp = i >> 2;
- 
--		if (otp < STM32MP15_BSEC_NUM_LOWER) {
-+		if (otp < priv->lower) {
- 			/* read lower data from shadow registers */
- 			val = readl_relaxed(
- 				priv->base + STM32MP15_BSEC_DATA0 + i);
-@@ -159,6 +158,8 @@ static int stm32_romem_probe(struct plat
- 	priv->cfg.priv = priv;
- 	priv->cfg.owner = THIS_MODULE;
- 
-+	priv->lower = 0;
-+
- 	cfg = (const struct stm32_romem_cfg *)
- 		of_match_device(dev->driver->of_match_table, dev)->data;
- 	if (!cfg) {
-@@ -167,6 +168,7 @@ static int stm32_romem_probe(struct plat
- 		priv->cfg.reg_read = stm32_romem_read;
- 	} else {
- 		priv->cfg.size = cfg->size;
-+		priv->lower = cfg->lower;
- 		priv->cfg.reg_read = stm32_bsec_read;
- 		priv->cfg.reg_write = stm32_bsec_write;
- 	}
-@@ -174,8 +176,17 @@ static int stm32_romem_probe(struct plat
- 	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &priv->cfg));
- }
- 
-+/*
-+ * STM32MP15 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits)
-+ * => 96 x 32-bits data words
-+ * - Lower: 1K bits, 2:1 redundancy, incremental bit programming
-+ *   => 32 (x 32-bits) lower shadow registers = words 0 to 31
-+ * - Upper: 2K bits, ECC protection, word programming only
-+ *   => 64 (x 32-bits) = words 32 to 95
-+ */
- static const struct stm32_romem_cfg stm32mp15_bsec_cfg = {
--	.size = 384, /* 96 x 32-bits data words */
-+	.size = 384,
-+	.lower = 32,
- };
- 
- static const struct of_device_id stm32_romem_of_match[] = {
diff --git a/target/linux/generic/backport-5.10/812-v6.2-0002-nvmem-stm32-add-warning-when-upper-OTPs-are-updated.patch b/target/linux/generic/backport-5.10/812-v6.2-0002-nvmem-stm32-add-warning-when-upper-OTPs-are-updated.patch
deleted file mode 100644
index 5791df2606ff..000000000000
--- a/target/linux/generic/backport-5.10/812-v6.2-0002-nvmem-stm32-add-warning-when-upper-OTPs-are-updated.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From d61784e6410f3df2028e6eb91b06ffed37a660e0 Mon Sep 17 00:00:00 2001
-From: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Date: Fri, 18 Nov 2022 06:39:21 +0000
-Subject: [PATCH] nvmem: stm32: add warning when upper OTPs are updated
-
-As the upper OTPs are ECC protected, they support only one 32 bits word
-programming.
-For a second modification of this word, these ECC become invalid and
-this OTP will be no more accessible, the shadowed value is invalid.
-
-This patch adds a warning to indicate an upper OTP update, because this
-operation is dangerous as OTP is not locked by the driver after the first
-update to avoid a second update.
-
-Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063932.6418-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -132,6 +132,9 @@ static int stm32_bsec_write(void *contex
- 		}
- 	}
- 
-+	if (offset + bytes >= priv->lower * 4)
-+		dev_warn(dev, "Update of upper OTPs with ECC protection (word programming, only once)\n");
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/backport-5.10/812-v6.2-0003-nvmem-stm32-add-nvmem-type-attribute.patch b/target/linux/generic/backport-5.10/812-v6.2-0003-nvmem-stm32-add-nvmem-type-attribute.patch
deleted file mode 100644
index b83ad69c6b4e..000000000000
--- a/target/linux/generic/backport-5.10/812-v6.2-0003-nvmem-stm32-add-nvmem-type-attribute.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From a3816a7d7c097c1da46aad5f5d1e229b607dce04 Mon Sep 17 00:00:00 2001
-From: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Date: Fri, 18 Nov 2022 06:39:22 +0000
-Subject: [PATCH] nvmem: stm32: add nvmem type attribute
-
-Inform NVMEM framework of type attribute for stm32-romem as NVMEM_TYPE_OTP
-so userspace is able to know how the data is stored in BSEC.
-
-Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063932.6418-4-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -160,6 +160,7 @@ static int stm32_romem_probe(struct plat
- 	priv->cfg.dev = dev;
- 	priv->cfg.priv = priv;
- 	priv->cfg.owner = THIS_MODULE;
-+	priv->cfg.type = NVMEM_TYPE_OTP;
- 
- 	priv->lower = 0;
- 
diff --git a/target/linux/generic/backport-5.10/812-v6.2-0004-nvmem-stm32-fix-spelling-typo-in-comment.patch b/target/linux/generic/backport-5.10/812-v6.2-0004-nvmem-stm32-fix-spelling-typo-in-comment.patch
deleted file mode 100644
index 52ba1e65b567..000000000000
--- a/target/linux/generic/backport-5.10/812-v6.2-0004-nvmem-stm32-fix-spelling-typo-in-comment.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 06aac0e11960a7ddccc1888326b5906d017e0f24 Mon Sep 17 00:00:00 2001
-From: Jiangshan Yi <yijiangshan@kylinos.cn>
-Date: Fri, 18 Nov 2022 06:39:24 +0000
-Subject: [PATCH] nvmem: stm32: fix spelling typo in comment
-
-Fix spelling typo in comment.
-
-Reported-by: k2ci <kernel-bot@kylinos.cn>
-Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063932.6418-6-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -19,7 +19,7 @@
- #define STM32_SMC_WRITE_SHADOW		0x03
- #define STM32_SMC_READ_OTP		0x04
- 
--/* shadow registers offest */
-+/* shadow registers offset */
- #define STM32MP15_BSEC_DATA0		0x200
- 
- struct stm32_romem_cfg {
diff --git a/target/linux/generic/backport-5.10/812-v6.2-0005-nvmem-Kconfig-Fix-spelling-mistake-controlls-control.patch b/target/linux/generic/backport-5.10/812-v6.2-0005-nvmem-Kconfig-Fix-spelling-mistake-controlls-control.patch
deleted file mode 100644
index 8f024f4c1acb..000000000000
--- a/target/linux/generic/backport-5.10/812-v6.2-0005-nvmem-Kconfig-Fix-spelling-mistake-controlls-control.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From fb817c4ef63e8cfb6e77ae4a2875ae854c80708f Mon Sep 17 00:00:00 2001
-From: Colin Ian King <colin.i.king@gmail.com>
-Date: Fri, 18 Nov 2022 06:39:26 +0000
-Subject: [PATCH] nvmem: Kconfig: Fix spelling mistake "controlls" ->
- "controls"
-
-There is a spelling mistake in a Kconfig description. Fix it.
-
-Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063932.6418-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -164,7 +164,7 @@ config NVMEM_MICROCHIP_OTPC
- 	depends on ARCH_AT91 || COMPILE_TEST
- 	help
- 	  This driver enable the OTP controller available on Microchip SAMA7G5
--	  SoCs. It controlls the access to the OTP memory connected to it.
-+	  SoCs. It controls the access to the OTP memory connected to it.
- 
- config NVMEM_MTK_EFUSE
- 	tristate "Mediatek SoCs EFUSE support"
diff --git a/target/linux/generic/backport-5.10/812-v6.2-0006-nvmem-u-boot-env-add-Broadcom-format-support.patch b/target/linux/generic/backport-5.10/812-v6.2-0006-nvmem-u-boot-env-add-Broadcom-format-support.patch
deleted file mode 100644
index 861386ad310b..000000000000
--- a/target/linux/generic/backport-5.10/812-v6.2-0006-nvmem-u-boot-env-add-Broadcom-format-support.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From ada84d07af6097b2addd18262668ce6cb9e15206 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 18 Nov 2022 06:39:27 +0000
-Subject: [PATCH] nvmem: u-boot-env: add Broadcom format support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom uses U-Boot for a lot of their bcmbca familiy chipsets. They
-decided to store U-Boot environment data inside U-Boot partition and to
-use a custom header (with "uEnv" magic and env data length).
-
-Add support for Broadcom's specific binding and their custom format.
-
-Ref: 6b0584c19d87 ("dt-bindings: nvmem: u-boot,env: add Broadcom's variant binding")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063932.6418-9-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/u-boot-env.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -16,6 +16,7 @@
- enum u_boot_env_format {
- 	U_BOOT_FORMAT_SINGLE,
- 	U_BOOT_FORMAT_REDUNDANT,
-+	U_BOOT_FORMAT_BROADCOM,
- };
- 
- struct u_boot_env {
-@@ -40,6 +41,13 @@ struct u_boot_env_image_redundant {
- 	uint8_t data[];
- } __packed;
- 
-+struct u_boot_env_image_broadcom {
-+	__le32 magic;
-+	__le32 len;
-+	__le32 crc32;
-+	uint8_t data[0];
-+} __packed;
-+
- static int u_boot_env_read(void *context, unsigned int offset, void *val,
- 			   size_t bytes)
- {
-@@ -138,6 +146,11 @@ static int u_boot_env_parse(struct u_boo
- 		crc32_data_offset = offsetof(struct u_boot_env_image_redundant, data);
- 		data_offset = offsetof(struct u_boot_env_image_redundant, data);
- 		break;
-+	case U_BOOT_FORMAT_BROADCOM:
-+		crc32_offset = offsetof(struct u_boot_env_image_broadcom, crc32);
-+		crc32_data_offset = offsetof(struct u_boot_env_image_broadcom, data);
-+		data_offset = offsetof(struct u_boot_env_image_broadcom, data);
-+		break;
- 	}
- 	crc32 = le32_to_cpu(*(__le32 *)(buf + crc32_offset));
- 	crc32_data_len = priv->mtd->size - crc32_data_offset;
-@@ -202,6 +215,7 @@ static const struct of_device_id u_boot_
- 	{ .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, },
- 	{ .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
- 	{ .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
-+	{ .compatible = "brcm,env", .data = (void *)U_BOOT_FORMAT_BROADCOM, },
- 	{},
- };
- 
diff --git a/target/linux/generic/backport-5.10/812-v6.2-0007-nvmem-brcm_nvram-Add-check-for-kzalloc.patch b/target/linux/generic/backport-5.10/812-v6.2-0007-nvmem-brcm_nvram-Add-check-for-kzalloc.patch
deleted file mode 100644
index 14108b592768..000000000000
--- a/target/linux/generic/backport-5.10/812-v6.2-0007-nvmem-brcm_nvram-Add-check-for-kzalloc.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From b0576ade3aaf24b376ea1a4406ae138e2a22b0c0 Mon Sep 17 00:00:00 2001
-From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
-Date: Fri, 27 Jan 2023 10:40:06 +0000
-Subject: [PATCH] nvmem: brcm_nvram: Add check for kzalloc
-
-Add the check for the return value of kzalloc in order to avoid
-NULL pointer dereference.
-
-Fixes: 6e977eaa8280 ("nvmem: brcm_nvram: parse NVRAM content into NVMEM cells")
-Cc: stable@vger.kernel.org
-Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230127104015.23839-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/brcm_nvram.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/nvmem/brcm_nvram.c
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -97,6 +97,9 @@ static int brcm_nvram_parse(struct brcm_
- 	len = le32_to_cpu(header.len);
- 
- 	data = kzalloc(len, GFP_KERNEL);
-+	if (!data)
-+		return -ENOMEM;
-+
- 	memcpy_fromio(data, priv->base, len);
- 	data[len - 1] = '\0';
- 
diff --git a/target/linux/generic/backport-5.10/812-v6.2-0008-nvmem-sunxi_sid-Always-use-32-bit-MMIO-reads.patch b/target/linux/generic/backport-5.10/812-v6.2-0008-nvmem-sunxi_sid-Always-use-32-bit-MMIO-reads.patch
deleted file mode 100644
index 632b01cb2ac8..000000000000
--- a/target/linux/generic/backport-5.10/812-v6.2-0008-nvmem-sunxi_sid-Always-use-32-bit-MMIO-reads.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From c151d5ed8e8fe0474bd61dce7f2076ca5916c683 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Fri, 27 Jan 2023 10:40:07 +0000
-Subject: [PATCH] nvmem: sunxi_sid: Always use 32-bit MMIO reads
-
-The SID SRAM on at least some SoCs (A64 and D1) returns different values
-when read with bus cycles narrower than 32 bits. This is not immediately
-obvious, because memcpy_fromio() uses word-size accesses as long as
-enough data is being copied.
-
-The vendor driver always uses 32-bit MMIO reads, so do the same here.
-This is faster than the register-based method, which is currently used
-as a workaround on A64. And it fixes the values returned on D1, where
-the SRAM method was being used.
-
-The special case for the last word is needed to maintain .word_size == 1
-for sysfs ABI compatibility, as noted previously in commit de2a3eaea552
-("nvmem: sunxi_sid: Optimize register read-out method").
-
-Fixes: 07ae4fde9efa ("nvmem: sunxi_sid: Add support for D1 variant")
-Cc: stable@vger.kernel.org
-Tested-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230127104015.23839-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/sunxi_sid.c | 15 ++++++++++++++-
- 1 file changed, 14 insertions(+), 1 deletion(-)
-
---- a/drivers/nvmem/sunxi_sid.c
-+++ b/drivers/nvmem/sunxi_sid.c
-@@ -41,8 +41,21 @@ static int sunxi_sid_read(void *context,
- 			  void *val, size_t bytes)
- {
- 	struct sunxi_sid *sid = context;
-+	u32 word;
- 
--	memcpy_fromio(val, sid->base + sid->value_offset + offset, bytes);
-+	/* .stride = 4 so offset is guaranteed to be aligned */
-+	__ioread32_copy(val, sid->base + sid->value_offset + offset, bytes / 4);
-+
-+	val += round_down(bytes, 4);
-+	offset += round_down(bytes, 4);
-+	bytes = bytes % 4;
-+
-+	if (!bytes)
-+		return 0;
-+
-+	/* Handle any trailing bytes */
-+	word = readl_relaxed(sid->base + sid->value_offset + offset);
-+	memcpy(val, &word, bytes);
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-5.10/812-v6.2-0013-nvmem-core-fix-device-node-refcounting.patch b/target/linux/generic/backport-5.10/812-v6.2-0013-nvmem-core-fix-device-node-refcounting.patch
deleted file mode 100644
index a229c303ad0f..000000000000
--- a/target/linux/generic/backport-5.10/812-v6.2-0013-nvmem-core-fix-device-node-refcounting.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From edcf2fb660526b5ed29f93bd17328a2b4835c8b2 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Fri, 27 Jan 2023 10:40:12 +0000
-Subject: [PATCH] nvmem: core: fix device node refcounting
-
-In of_nvmem_cell_get(), of_get_next_parent() is used on cell_np. This
-will decrement the refcount on cell_np, but cell_np is still used later
-in the code. Use of_get_parent() instead and of_node_put() in the
-appropriate places.
-
-Fixes: 69aba7948cbe ("nvmem: Add a simple NVMEM framework for consumers")
-Fixes: 7ae6478b304b ("nvmem: core: rework nvmem cell instance creation")
-Cc: stable@vger.kernel.org
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230127104015.23839-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -1237,16 +1237,21 @@ struct nvmem_cell *of_nvmem_cell_get(str
- 	if (!cell_np)
- 		return ERR_PTR(-ENOENT);
- 
--	nvmem_np = of_get_next_parent(cell_np);
--	if (!nvmem_np)
-+	nvmem_np = of_get_parent(cell_np);
-+	if (!nvmem_np) {
-+		of_node_put(cell_np);
- 		return ERR_PTR(-EINVAL);
-+	}
- 
- 	nvmem = __nvmem_device_get(nvmem_np, device_match_of_node);
- 	of_node_put(nvmem_np);
--	if (IS_ERR(nvmem))
-+	if (IS_ERR(nvmem)) {
-+		of_node_put(cell_np);
- 		return ERR_CAST(nvmem);
-+	}
- 
- 	cell_entry = nvmem_find_cell_entry_by_node(nvmem, cell_np);
-+	of_node_put(cell_np);
- 	if (!cell_entry) {
- 		__nvmem_device_put(nvmem);
- 		return ERR_PTR(-ENOENT);
diff --git a/target/linux/generic/backport-5.10/813-v6.3-0001-nvmem-core-remove-spurious-white-space.patch b/target/linux/generic/backport-5.10/813-v6.3-0001-nvmem-core-remove-spurious-white-space.patch
deleted file mode 100644
index 01400fd490d0..000000000000
--- a/target/linux/generic/backport-5.10/813-v6.3-0001-nvmem-core-remove-spurious-white-space.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 2e8dc541ae207349b51c65391be625ffe1f86e0c Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Mon, 6 Feb 2023 13:43:41 +0000
-Subject: [PATCH] nvmem: core: remove spurious white space
-
-Remove a spurious white space in for the ida_alloc() call.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -764,7 +764,7 @@ struct nvmem_device *nvmem_register(cons
- 	if (!nvmem)
- 		return ERR_PTR(-ENOMEM);
- 
--	rval  = ida_alloc(&nvmem_ida, GFP_KERNEL);
-+	rval = ida_alloc(&nvmem_ida, GFP_KERNEL);
- 	if (rval < 0) {
- 		kfree(nvmem);
- 		return ERR_PTR(rval);
diff --git a/target/linux/generic/backport-5.10/813-v6.3-0002-nvmem-core-add-an-index-parameter-to-the-cell.patch b/target/linux/generic/backport-5.10/813-v6.3-0002-nvmem-core-add-an-index-parameter-to-the-cell.patch
deleted file mode 100644
index 454d3bf0ed1a..000000000000
--- a/target/linux/generic/backport-5.10/813-v6.3-0002-nvmem-core-add-an-index-parameter-to-the-cell.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From 5d8e6e6c10a3d37486d263b16ddc15991a7e4a88 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:46 +0000
-Subject: [PATCH] nvmem: core: add an index parameter to the cell
-
-Sometimes a cell can represend multiple values. For example, a base
-ethernet address stored in the NVMEM can be expanded into multiple
-discreet ones by adding an offset.
-
-For this use case, introduce an index parameter which is then used to
-distiguish between values. This parameter will then be passed to the
-post process hook which can then use it to create different values
-during reading.
-
-At the moment, there is only support for the device tree path. You can
-add the index to the phandle, e.g.
-
-  &net {
-          nvmem-cells = <&base_mac_address 2>;
-          nvmem-cell-names = "mac-address";
-  };
-
-  &nvmem_provider {
-          base_mac_address: base-mac-address@0 {
-                  #nvmem-cell-cells = <1>;
-                  reg = <0 6>;
-          };
-  };
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-13-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 37 ++++++++++++++++++++++++----------
- drivers/nvmem/imx-ocotp.c      |  4 ++--
- include/linux/nvmem-provider.h |  4 ++--
- 3 files changed, 30 insertions(+), 15 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -60,6 +60,7 @@ struct nvmem_cell_entry {
- struct nvmem_cell {
- 	struct nvmem_cell_entry *entry;
- 	const char		*id;
-+	int			index;
- };
- 
- static DEFINE_MUTEX(nvmem_mutex);
-@@ -1122,7 +1123,8 @@ struct nvmem_device *devm_nvmem_device_g
- }
- EXPORT_SYMBOL_GPL(devm_nvmem_device_get);
- 
--static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry, const char *id)
-+static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry,
-+					    const char *id, int index)
- {
- 	struct nvmem_cell *cell;
- 	const char *name = NULL;
-@@ -1141,6 +1143,7 @@ static struct nvmem_cell *nvmem_create_c
- 
- 	cell->id = name;
- 	cell->entry = entry;
-+	cell->index = index;
- 
- 	return cell;
- }
-@@ -1179,7 +1182,7 @@ nvmem_cell_get_from_lookup(struct device
- 				__nvmem_device_put(nvmem);
- 				cell = ERR_PTR(-ENOENT);
- 			} else {
--				cell = nvmem_create_cell(cell_entry, con_id);
-+				cell = nvmem_create_cell(cell_entry, con_id, 0);
- 				if (IS_ERR(cell))
- 					__nvmem_device_put(nvmem);
- 			}
-@@ -1227,15 +1230,27 @@ struct nvmem_cell *of_nvmem_cell_get(str
- 	struct nvmem_device *nvmem;
- 	struct nvmem_cell_entry *cell_entry;
- 	struct nvmem_cell *cell;
-+	struct of_phandle_args cell_spec;
- 	int index = 0;
-+	int cell_index = 0;
-+	int ret;
- 
- 	/* if cell name exists, find index to the name */
- 	if (id)
- 		index = of_property_match_string(np, "nvmem-cell-names", id);
- 
--	cell_np = of_parse_phandle(np, "nvmem-cells", index);
--	if (!cell_np)
--		return ERR_PTR(-ENOENT);
-+	ret = of_parse_phandle_with_optional_args(np, "nvmem-cells",
-+						  "#nvmem-cell-cells",
-+						  index, &cell_spec);
-+	if (ret)
-+		return ERR_PTR(ret);
-+
-+	if (cell_spec.args_count > 1)
-+		return ERR_PTR(-EINVAL);
-+
-+	cell_np = cell_spec.np;
-+	if (cell_spec.args_count)
-+		cell_index = cell_spec.args[0];
- 
- 	nvmem_np = of_get_parent(cell_np);
- 	if (!nvmem_np) {
-@@ -1257,7 +1272,7 @@ struct nvmem_cell *of_nvmem_cell_get(str
- 		return ERR_PTR(-ENOENT);
- 	}
- 
--	cell = nvmem_create_cell(cell_entry, id);
-+	cell = nvmem_create_cell(cell_entry, id, cell_index);
- 	if (IS_ERR(cell))
- 		__nvmem_device_put(nvmem);
- 
-@@ -1410,8 +1425,8 @@ static void nvmem_shift_read_buffer_in_p
- }
- 
- static int __nvmem_cell_read(struct nvmem_device *nvmem,
--		      struct nvmem_cell_entry *cell,
--		      void *buf, size_t *len, const char *id)
-+			     struct nvmem_cell_entry *cell,
-+			     void *buf, size_t *len, const char *id, int index)
- {
- 	int rc;
- 
-@@ -1425,7 +1440,7 @@ static int __nvmem_cell_read(struct nvme
- 		nvmem_shift_read_buffer_in_place(cell, buf);
- 
- 	if (nvmem->cell_post_process) {
--		rc = nvmem->cell_post_process(nvmem->priv, id,
-+		rc = nvmem->cell_post_process(nvmem->priv, id, index,
- 					      cell->offset, buf, cell->bytes);
- 		if (rc)
- 			return rc;
-@@ -1460,7 +1475,7 @@ void *nvmem_cell_read(struct nvmem_cell
- 	if (!buf)
- 		return ERR_PTR(-ENOMEM);
- 
--	rc = __nvmem_cell_read(nvmem, cell->entry, buf, len, cell->id);
-+	rc = __nvmem_cell_read(nvmem, cell->entry, buf, len, cell->id, cell->index);
- 	if (rc) {
- 		kfree(buf);
- 		return ERR_PTR(rc);
-@@ -1773,7 +1788,7 @@ ssize_t nvmem_device_cell_read(struct nv
- 	if (rc)
- 		return rc;
- 
--	rc = __nvmem_cell_read(nvmem, &cell, buf, &len, NULL);
-+	rc = __nvmem_cell_read(nvmem, &cell, buf, &len, NULL, 0);
- 	if (rc)
- 		return rc;
- 
---- a/drivers/nvmem/imx-ocotp.c
-+++ b/drivers/nvmem/imx-ocotp.c
-@@ -222,8 +222,8 @@ read_end:
- 	return ret;
- }
- 
--static int imx_ocotp_cell_pp(void *context, const char *id, unsigned int offset,
--			     void *data, size_t bytes)
-+static int imx_ocotp_cell_pp(void *context, const char *id, int index,
-+			     unsigned int offset, void *data, size_t bytes)
- {
- 	struct ocotp_priv *priv = context;
- 
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -20,8 +20,8 @@ typedef int (*nvmem_reg_read_t)(void *pr
- typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset,
- 				 void *val, size_t bytes);
- /* used for vendor specific post processing of cell data */
--typedef int (*nvmem_cell_post_process_t)(void *priv, const char *id, unsigned int offset,
--					  void *buf, size_t bytes);
-+typedef int (*nvmem_cell_post_process_t)(void *priv, const char *id, int index,
-+					 unsigned int offset, void *buf, size_t bytes);
- 
- enum nvmem_type {
- 	NVMEM_TYPE_UNKNOWN = 0,
diff --git a/target/linux/generic/backport-5.10/813-v6.3-0003-nvmem-core-move-struct-nvmem_cell_info-to-nvmem-prov.patch b/target/linux/generic/backport-5.10/813-v6.3-0003-nvmem-core-move-struct-nvmem_cell_info-to-nvmem-prov.patch
deleted file mode 100644
index f3829b3e17f4..000000000000
--- a/target/linux/generic/backport-5.10/813-v6.3-0003-nvmem-core-move-struct-nvmem_cell_info-to-nvmem-prov.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From fbd03d27776c6121a483921601418e3c8f0ff37e Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:47 +0000
-Subject: [PATCH] nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
-
-struct nvmem_cell_info is used to describe a cell. Thus this should
-really be in the nvmem-provider's header. There are two (unused) nvmem
-access methods which use the nvmem_cell_info to describe the cell to be
-accesses. One can argue, that they will create a cell before accessing,
-thus they are both a provider and a consumer.
-
-struct nvmem_cell_info will get used more and more by nvmem-providers,
-don't force them to also include the consumer header, although they are
-not.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-14-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- include/linux/nvmem-consumer.h | 10 +---------
- include/linux/nvmem-provider.h | 19 ++++++++++++++++++-
- 2 files changed, 19 insertions(+), 10 deletions(-)
-
---- a/include/linux/nvmem-consumer.h
-+++ b/include/linux/nvmem-consumer.h
-@@ -18,15 +18,7 @@ struct device_node;
- /* consumer cookie */
- struct nvmem_cell;
- struct nvmem_device;
--
--struct nvmem_cell_info {
--	const char		*name;
--	unsigned int		offset;
--	unsigned int		bytes;
--	unsigned int		bit_offset;
--	unsigned int		nbits;
--	struct device_node	*np;
--};
-+struct nvmem_cell_info;
- 
- /**
-  * struct nvmem_cell_lookup - cell lookup entry
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -14,7 +14,6 @@
- #include <linux/gpio/consumer.h>
- 
- struct nvmem_device;
--struct nvmem_cell_info;
- typedef int (*nvmem_reg_read_t)(void *priv, unsigned int offset,
- 				void *val, size_t bytes);
- typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset,
-@@ -48,6 +47,24 @@ struct nvmem_keepout {
- };
- 
- /**
-+ * struct nvmem_cell_info - NVMEM cell description
-+ * @name:	Name.
-+ * @offset:	Offset within the NVMEM device.
-+ * @bytes:	Length of the cell.
-+ * @bit_offset:	Bit offset if cell is smaller than a byte.
-+ * @nbits:	Number of bits.
-+ * @np:		Optional device_node pointer.
-+ */
-+struct nvmem_cell_info {
-+	const char		*name;
-+	unsigned int		offset;
-+	unsigned int		bytes;
-+	unsigned int		bit_offset;
-+	unsigned int		nbits;
-+	struct device_node	*np;
-+};
-+
-+/**
-  * struct nvmem_config - NVMEM device configuration
-  *
-  * @dev:	Parent device.
diff --git a/target/linux/generic/backport-5.10/813-v6.3-0004-nvmem-core-drop-the-removal-of-the-cells-in-nvmem_ad.patch b/target/linux/generic/backport-5.10/813-v6.3-0004-nvmem-core-drop-the-removal-of-the-cells-in-nvmem_ad.patch
deleted file mode 100644
index 8f996eab348f..000000000000
--- a/target/linux/generic/backport-5.10/813-v6.3-0004-nvmem-core-drop-the-removal-of-the-cells-in-nvmem_ad.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From cc5bdd323dde6494623f3ffe3a5b887fa21cd375 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:48 +0000
-Subject: [PATCH] nvmem: core: drop the removal of the cells in
- nvmem_add_cells()
-
-If nvmem_add_cells() fails, the whole nvmem_register() will fail
-and the cells will then be removed anyway. This is a preparation
-to introduce a nvmem_add_one_cell() which can then be used by
-nvmem_add_cells().
-
-This is then the same to what nvmem_add_cells_from_table() and
-nvmem_add_cells_from_of() do.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-15-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 14 ++++----------
- 1 file changed, 4 insertions(+), 10 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -515,7 +515,7 @@ static int nvmem_add_cells(struct nvmem_
- 		    int ncells)
- {
- 	struct nvmem_cell_entry **cells;
--	int i, rval;
-+	int i, rval = 0;
- 
- 	cells = kcalloc(ncells, sizeof(*cells), GFP_KERNEL);
- 	if (!cells)
-@@ -525,28 +525,22 @@ static int nvmem_add_cells(struct nvmem_
- 		cells[i] = kzalloc(sizeof(**cells), GFP_KERNEL);
- 		if (!cells[i]) {
- 			rval = -ENOMEM;
--			goto err;
-+			goto out;
- 		}
- 
- 		rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, &info[i], cells[i]);
- 		if (rval) {
- 			kfree(cells[i]);
--			goto err;
-+			goto out;
- 		}
- 
- 		nvmem_cell_entry_add(cells[i]);
- 	}
- 
-+out:
- 	/* remove tmp array */
- 	kfree(cells);
- 
--	return 0;
--err:
--	while (i--)
--		nvmem_cell_entry_drop(cells[i]);
--
--	kfree(cells);
--
- 	return rval;
- }
- 
diff --git a/target/linux/generic/backport-5.10/813-v6.3-0005-nvmem-core-add-nvmem_add_one_cell.patch b/target/linux/generic/backport-5.10/813-v6.3-0005-nvmem-core-add-nvmem_add_one_cell.patch
deleted file mode 100644
index 711ce229b2c7..000000000000
--- a/target/linux/generic/backport-5.10/813-v6.3-0005-nvmem-core-add-nvmem_add_one_cell.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 2ded6830d376d5e7bf43d59f7f7fdf1a59abc676 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:49 +0000
-Subject: [PATCH] nvmem: core: add nvmem_add_one_cell()
-
-Add a new function to add exactly one cell. This will be used by the
-nvmem layout drivers to add custom cells. In contrast to the
-nvmem_add_cells(), this has the advantage that we don't have to assemble
-a list of cells on runtime.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-16-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 59 ++++++++++++++++++++--------------
- include/linux/nvmem-provider.h |  8 +++++
- 2 files changed, 43 insertions(+), 24 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -502,6 +502,36 @@ static int nvmem_cell_info_to_nvmem_cell
- }
- 
- /**
-+ * nvmem_add_one_cell() - Add one cell information to an nvmem device
-+ *
-+ * @nvmem: nvmem device to add cells to.
-+ * @info: nvmem cell info to add to the device
-+ *
-+ * Return: 0 or negative error code on failure.
-+ */
-+int nvmem_add_one_cell(struct nvmem_device *nvmem,
-+		       const struct nvmem_cell_info *info)
-+{
-+	struct nvmem_cell_entry *cell;
-+	int rval;
-+
-+	cell = kzalloc(sizeof(*cell), GFP_KERNEL);
-+	if (!cell)
-+		return -ENOMEM;
-+
-+	rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, info, cell);
-+	if (rval) {
-+		kfree(cell);
-+		return rval;
-+	}
-+
-+	nvmem_cell_entry_add(cell);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(nvmem_add_one_cell);
-+
-+/**
-  * nvmem_add_cells() - Add cell information to an nvmem device
-  *
-  * @nvmem: nvmem device to add cells to.
-@@ -514,34 +544,15 @@ static int nvmem_add_cells(struct nvmem_
- 		    const struct nvmem_cell_info *info,
- 		    int ncells)
- {
--	struct nvmem_cell_entry **cells;
--	int i, rval = 0;
--
--	cells = kcalloc(ncells, sizeof(*cells), GFP_KERNEL);
--	if (!cells)
--		return -ENOMEM;
-+	int i, rval;
- 
- 	for (i = 0; i < ncells; i++) {
--		cells[i] = kzalloc(sizeof(**cells), GFP_KERNEL);
--		if (!cells[i]) {
--			rval = -ENOMEM;
--			goto out;
--		}
--
--		rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, &info[i], cells[i]);
--		if (rval) {
--			kfree(cells[i]);
--			goto out;
--		}
--
--		nvmem_cell_entry_add(cells[i]);
-+		rval = nvmem_add_one_cell(nvmem, &info[i]);
-+		if (rval)
-+			return rval;
- 	}
- 
--out:
--	/* remove tmp array */
--	kfree(cells);
--
--	return rval;
-+	return 0;
- }
- 
- /**
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -153,6 +153,9 @@ struct nvmem_device *devm_nvmem_register
- void nvmem_add_cell_table(struct nvmem_cell_table *table);
- void nvmem_del_cell_table(struct nvmem_cell_table *table);
- 
-+int nvmem_add_one_cell(struct nvmem_device *nvmem,
-+		       const struct nvmem_cell_info *info);
-+
- #else
- 
- static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c)
-@@ -170,6 +173,11 @@ devm_nvmem_register(struct device *dev,
- 
- static inline void nvmem_add_cell_table(struct nvmem_cell_table *table) {}
- static inline void nvmem_del_cell_table(struct nvmem_cell_table *table) {}
-+static inline int nvmem_add_one_cell(struct nvmem_device *nvmem,
-+				     const struct nvmem_cell_info *info)
-+{
-+	return -EOPNOTSUPP;
-+}
- 
- #endif /* CONFIG_NVMEM */
- #endif  /* ifndef _LINUX_NVMEM_PROVIDER_H */
diff --git a/target/linux/generic/backport-5.10/813-v6.3-0006-nvmem-core-use-nvmem_add_one_cell-in-nvmem_add_cells.patch b/target/linux/generic/backport-5.10/813-v6.3-0006-nvmem-core-use-nvmem_add_one_cell-in-nvmem_add_cells.patch
deleted file mode 100644
index e1791e5c83cf..000000000000
--- a/target/linux/generic/backport-5.10/813-v6.3-0006-nvmem-core-use-nvmem_add_one_cell-in-nvmem_add_cells.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 50014d659617dc58780a5d31ceb76c82779a9d8b Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:50 +0000
-Subject: [PATCH] nvmem: core: use nvmem_add_one_cell() in
- nvmem_add_cells_from_of()
-
-Convert nvmem_add_cells_from_of() to use the new nvmem_add_one_cell().
-This will remove duplicate code and it will make it possible to add a
-hook to a nvmem layout in between, which can change fields before the
-cell is finally added.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-17-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 45 ++++++++++++++------------------------------
- 1 file changed, 14 insertions(+), 31 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -688,15 +688,14 @@ static int nvmem_validate_keepouts(struc
- 
- static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
- {
--	struct device_node *parent, *child;
- 	struct device *dev = &nvmem->dev;
--	struct nvmem_cell_entry *cell;
-+	struct device_node *child;
- 	const __be32 *addr;
--	int len;
-+	int len, ret;
- 
--	parent = dev->of_node;
-+	for_each_child_of_node(dev->of_node, child) {
-+		struct nvmem_cell_info info = {0};
- 
--	for_each_child_of_node(parent, child) {
- 		addr = of_get_property(child, "reg", &len);
- 		if (!addr)
- 			continue;
-@@ -706,40 +705,24 @@ static int nvmem_add_cells_from_of(struc
- 			return -EINVAL;
- 		}
- 
--		cell = kzalloc(sizeof(*cell), GFP_KERNEL);
--		if (!cell) {
--			of_node_put(child);
--			return -ENOMEM;
--		}
--
--		cell->nvmem = nvmem;
--		cell->offset = be32_to_cpup(addr++);
--		cell->bytes = be32_to_cpup(addr);
--		cell->name = kasprintf(GFP_KERNEL, "%pOFn", child);
-+		info.offset = be32_to_cpup(addr++);
-+		info.bytes = be32_to_cpup(addr);
-+		info.name = kasprintf(GFP_KERNEL, "%pOFn", child);
- 
- 		addr = of_get_property(child, "bits", &len);
- 		if (addr && len == (2 * sizeof(u32))) {
--			cell->bit_offset = be32_to_cpup(addr++);
--			cell->nbits = be32_to_cpup(addr);
-+			info.bit_offset = be32_to_cpup(addr++);
-+			info.nbits = be32_to_cpup(addr);
- 		}
- 
--		if (cell->nbits)
--			cell->bytes = DIV_ROUND_UP(
--					cell->nbits + cell->bit_offset,
--					BITS_PER_BYTE);
--
--		if (!IS_ALIGNED(cell->offset, nvmem->stride)) {
--			dev_err(dev, "cell %s unaligned to nvmem stride %d\n",
--				cell->name, nvmem->stride);
--			/* Cells already added will be freed later. */
--			kfree_const(cell->name);
--			kfree(cell);
-+		info.np = of_node_get(child);
-+
-+		ret = nvmem_add_one_cell(nvmem, &info);
-+		kfree(info.name);
-+		if (ret) {
- 			of_node_put(child);
--			return -EINVAL;
-+			return ret;
- 		}
--
--		cell->np = of_node_get(child);
--		nvmem_cell_entry_add(cell);
- 	}
- 
- 	return 0;
diff --git a/target/linux/generic/backport-5.10/813-v6.3-0007-nvmem-stm32-add-OP-TEE-support-for-STM32MP13x.patch b/target/linux/generic/backport-5.10/813-v6.3-0007-nvmem-stm32-add-OP-TEE-support-for-STM32MP13x.patch
deleted file mode 100644
index 172a78b76af1..000000000000
--- a/target/linux/generic/backport-5.10/813-v6.3-0007-nvmem-stm32-add-OP-TEE-support-for-STM32MP13x.patch
+++ /dev/null
@@ -1,562 +0,0 @@
-From 6a0bc3522e746025e2d9a63ab2cb5d7062c2d39c Mon Sep 17 00:00:00 2001
-From: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Date: Mon, 6 Feb 2023 13:43:51 +0000
-Subject: [PATCH] nvmem: stm32: add OP-TEE support for STM32MP13x
-
-For boot with OP-TEE on STM32MP13, the communication with the secure
-world no more use STMicroelectronics SMC but communication with the
-STM32MP BSEC TA, for data access (read/write) or lock operation:
-- all the request are sent to OP-TEE trusted application,
-- for upper OTP with ECC protection and with word programming only
-  each OTP are permanently locked when programmed to avoid ECC error
-  on the second write operation
-
-Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-18-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig               |  11 +
- drivers/nvmem/Makefile              |   1 +
- drivers/nvmem/stm32-bsec-optee-ta.c | 298 ++++++++++++++++++++++++++++
- drivers/nvmem/stm32-bsec-optee-ta.h |  80 ++++++++
- drivers/nvmem/stm32-romem.c         |  54 ++++-
- 5 files changed, 441 insertions(+), 3 deletions(-)
- create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.c
- create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.h
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -290,9 +290,20 @@ config NVMEM_SPRD_EFUSE
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem-sprd-efuse.
- 
-+config NVMEM_STM32_BSEC_OPTEE_TA
-+	bool "STM32MP BSEC OP-TEE TA support for nvmem-stm32-romem driver"
-+	depends on OPTEE
-+	help
-+	  Say y here to enable the accesses to STM32MP SoC OTPs by the OP-TEE
-+	  trusted application STM32MP BSEC.
-+
-+	  This library is a used by stm32-romem driver or included in the module
-+	  called nvmem-stm32-romem.
-+
- config NVMEM_STM32_ROMEM
- 	tristate "STMicroelectronics STM32 factory-programmed memory support"
- 	depends on ARCH_STM32 || COMPILE_TEST
-+	imply NVMEM_STM32_BSEC_OPTEE_TA
- 	help
- 	  Say y here to enable read-only access for STMicroelectronics STM32
- 	  factory-programmed memory area.
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -61,6 +61,7 @@ obj-$(CONFIG_NVMEM_SPRD_EFUSE)		+= nvmem
- nvmem_sprd_efuse-y			:= sprd-efuse.o
- obj-$(CONFIG_NVMEM_STM32_ROMEM)		+= nvmem_stm32_romem.o
- nvmem_stm32_romem-y 			:= stm32-romem.o
-+nvmem_stm32_romem-$(CONFIG_NVMEM_STM32_BSEC_OPTEE_TA) += stm32-bsec-optee-ta.o
- obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP)	+= nvmem_sunplus_ocotp.o
- nvmem_sunplus_ocotp-y			:= sunplus-ocotp.o
- obj-$(CONFIG_NVMEM_SUNXI_SID)		+= nvmem_sunxi_sid.o
---- /dev/null
-+++ b/drivers/nvmem/stm32-bsec-optee-ta.c
-@@ -0,0 +1,298 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
-+ *
-+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
-+ */
-+
-+#include <linux/tee_drv.h>
-+
-+#include "stm32-bsec-optee-ta.h"
-+
-+/*
-+ * Read OTP memory
-+ *
-+ * [in]		value[0].a		OTP start offset in byte
-+ * [in]		value[0].b		Access type (0:shadow, 1:fuse, 2:lock)
-+ * [out]	memref[1].buffer	Output buffer to store read values
-+ * [out]	memref[1].size		Size of OTP to be read
-+ *
-+ * Return codes:
-+ * TEE_SUCCESS - Invoke command success
-+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
-+ * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
-+ */
-+#define PTA_BSEC_READ_MEM		0x0
-+
-+/*
-+ * Write OTP memory
-+ *
-+ * [in]		value[0].a		OTP start offset in byte
-+ * [in]		value[0].b		Access type (0:shadow, 1:fuse, 2:lock)
-+ * [in]		memref[1].buffer	Input buffer to read values
-+ * [in]		memref[1].size		Size of OTP to be written
-+ *
-+ * Return codes:
-+ * TEE_SUCCESS - Invoke command success
-+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
-+ * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
-+ */
-+#define PTA_BSEC_WRITE_MEM		0x1
-+
-+/* value of PTA_BSEC access type = value[in] b */
-+#define SHADOW_ACCESS	0
-+#define FUSE_ACCESS	1
-+#define LOCK_ACCESS	2
-+
-+/* Bitfield definition for LOCK status */
-+#define LOCK_PERM			BIT(30)
-+
-+/* OP-TEE STM32MP BSEC TA UUID */
-+static const uuid_t stm32mp_bsec_ta_uuid =
-+	UUID_INIT(0x94cf71ad, 0x80e6, 0x40b5,
-+		  0xa7, 0xc6, 0x3d, 0xc5, 0x01, 0xeb, 0x28, 0x03);
-+
-+/*
-+ * Check whether this driver supports the BSEC TA in the TEE instance
-+ * represented by the params (ver/data) to this function.
-+ */
-+static int stm32_bsec_optee_ta_match(struct tee_ioctl_version_data *ver,
-+				     const void *data)
-+{
-+	/* Currently this driver only supports GP compliant, OP-TEE based TA */
-+	if ((ver->impl_id == TEE_IMPL_ID_OPTEE) &&
-+		(ver->gen_caps & TEE_GEN_CAP_GP))
-+		return 1;
-+	else
-+		return 0;
-+}
-+
-+/* Open a session to OP-TEE for STM32MP BSEC TA */
-+static int stm32_bsec_ta_open_session(struct tee_context *ctx, u32 *id)
-+{
-+	struct tee_ioctl_open_session_arg sess_arg;
-+	int rc;
-+
-+	memset(&sess_arg, 0, sizeof(sess_arg));
-+	export_uuid(sess_arg.uuid, &stm32mp_bsec_ta_uuid);
-+	sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
-+	sess_arg.num_params = 0;
-+
-+	rc = tee_client_open_session(ctx, &sess_arg, NULL);
-+	if ((rc < 0) || (sess_arg.ret != 0)) {
-+		pr_err("%s: tee_client_open_session failed err:%#x, ret:%#x\n",
-+		       __func__, sess_arg.ret, rc);
-+		if (!rc)
-+			rc = -EINVAL;
-+	} else {
-+		*id = sess_arg.session;
-+	}
-+
-+	return rc;
-+}
-+
-+/* close a session to OP-TEE for STM32MP BSEC TA */
-+static void stm32_bsec_ta_close_session(void *ctx, u32 id)
-+{
-+	tee_client_close_session(ctx, id);
-+}
-+
-+/* stm32_bsec_optee_ta_open() - initialize the STM32MP BSEC TA */
-+int stm32_bsec_optee_ta_open(struct tee_context **ctx)
-+{
-+	struct tee_context *tee_ctx;
-+	u32 session_id;
-+	int rc;
-+
-+	/* Open context with TEE driver */
-+	tee_ctx = tee_client_open_context(NULL, stm32_bsec_optee_ta_match, NULL, NULL);
-+	if (IS_ERR(tee_ctx)) {
-+		rc = PTR_ERR(tee_ctx);
-+		if (rc == -ENOENT)
-+			return -EPROBE_DEFER;
-+		pr_err("%s: tee_client_open_context failed (%d)\n", __func__, rc);
-+
-+		return rc;
-+	}
-+
-+	/* Check STM32MP BSEC TA presence */
-+	rc = stm32_bsec_ta_open_session(tee_ctx, &session_id);
-+	if (rc) {
-+		tee_client_close_context(tee_ctx);
-+		return rc;
-+	}
-+
-+	stm32_bsec_ta_close_session(tee_ctx, session_id);
-+
-+	*ctx = tee_ctx;
-+
-+	return 0;
-+}
-+
-+/* stm32_bsec_optee_ta_open() - release the PTA STM32MP BSEC TA */
-+void stm32_bsec_optee_ta_close(void *ctx)
-+{
-+	tee_client_close_context(ctx);
-+}
-+
-+/* stm32_bsec_optee_ta_read() - nvmem read access using PTA client driver */
-+int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
-+			     void *buf, size_t bytes)
-+{
-+	struct tee_shm *shm;
-+	struct tee_ioctl_invoke_arg arg;
-+	struct tee_param param[2];
-+	u8 *shm_buf;
-+	u32 start, num_bytes;
-+	int ret;
-+	u32 session_id;
-+
-+	ret = stm32_bsec_ta_open_session(ctx, &session_id);
-+	if (ret)
-+		return ret;
-+
-+	memset(&arg, 0, sizeof(arg));
-+	memset(&param, 0, sizeof(param));
-+
-+	arg.func = PTA_BSEC_READ_MEM;
-+	arg.session = session_id;
-+	arg.num_params = 2;
-+
-+	/* align access on 32bits */
-+	start = ALIGN_DOWN(offset, 4);
-+	num_bytes = round_up(offset + bytes - start, 4);
-+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
-+	param[0].u.value.a = start;
-+	param[0].u.value.b = SHADOW_ACCESS;
-+
-+	shm = tee_shm_alloc_kernel_buf(ctx, num_bytes);
-+	if (IS_ERR(shm)) {
-+		ret = PTR_ERR(shm);
-+		goto out_tee_session;
-+	}
-+
-+	param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
-+	param[1].u.memref.shm = shm;
-+	param[1].u.memref.size = num_bytes;
-+
-+	ret = tee_client_invoke_func(ctx, &arg, param);
-+	if (ret < 0 || arg.ret != 0) {
-+		pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n",
-+			arg.ret, ret);
-+		if (!ret)
-+			ret = -EIO;
-+	}
-+	if (!ret) {
-+		shm_buf = tee_shm_get_va(shm, 0);
-+		if (IS_ERR(shm_buf)) {
-+			ret = PTR_ERR(shm_buf);
-+			pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
-+		} else {
-+			/* read data from 32 bits aligned buffer */
-+			memcpy(buf, &shm_buf[offset % 4], bytes);
-+		}
-+	}
-+
-+	tee_shm_free(shm);
-+
-+out_tee_session:
-+	stm32_bsec_ta_close_session(ctx, session_id);
-+
-+	return ret;
-+}
-+
-+/* stm32_bsec_optee_ta_write() - nvmem write access using PTA client driver */
-+int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
-+			      unsigned int offset, void *buf, size_t bytes)
-+{	struct tee_shm *shm;
-+	struct tee_ioctl_invoke_arg arg;
-+	struct tee_param param[2];
-+	u8 *shm_buf;
-+	int ret;
-+	u32 session_id;
-+
-+	ret = stm32_bsec_ta_open_session(ctx, &session_id);
-+	if (ret)
-+		return ret;
-+
-+	/* Allow only writing complete 32-bits aligned words */
-+	if ((bytes % 4) || (offset % 4))
-+		return -EINVAL;
-+
-+	memset(&arg, 0, sizeof(arg));
-+	memset(&param, 0, sizeof(param));
-+
-+	arg.func = PTA_BSEC_WRITE_MEM;
-+	arg.session = session_id;
-+	arg.num_params = 2;
-+
-+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
-+	param[0].u.value.a = offset;
-+	param[0].u.value.b = FUSE_ACCESS;
-+
-+	shm = tee_shm_alloc_kernel_buf(ctx, bytes);
-+	if (IS_ERR(shm)) {
-+		ret = PTR_ERR(shm);
-+		goto out_tee_session;
-+	}
-+
-+	param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT;
-+	param[1].u.memref.shm = shm;
-+	param[1].u.memref.size = bytes;
-+
-+	shm_buf = tee_shm_get_va(shm, 0);
-+	if (IS_ERR(shm_buf)) {
-+		ret = PTR_ERR(shm_buf);
-+		pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
-+		tee_shm_free(shm);
-+
-+		goto out_tee_session;
-+	}
-+
-+	memcpy(shm_buf, buf, bytes);
-+
-+	ret = tee_client_invoke_func(ctx, &arg, param);
-+	if (ret < 0 || arg.ret != 0) {
-+		pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);
-+		if (!ret)
-+			ret = -EIO;
-+	}
-+	pr_debug("Write OTPs %d to %zu, ret=%d\n", offset / 4, (offset + bytes) / 4, ret);
-+
-+	/* Lock the upper OTPs with ECC protection, word programming only */
-+	if (!ret && ((offset + bytes) >= (lower * 4))) {
-+		u32 start, nb_lock;
-+		u32 *lock = (u32 *)shm_buf;
-+		int i;
-+
-+		/*
-+		 * don't lock the lower OTPs, no ECC protection and incremental
-+		 * bit programming, a second write is allowed
-+		 */
-+		start = max_t(u32, offset, lower * 4);
-+		nb_lock = (offset + bytes - start) / 4;
-+
-+		param[0].u.value.a = start;
-+		param[0].u.value.b = LOCK_ACCESS;
-+		param[1].u.memref.size = nb_lock * 4;
-+
-+		for (i = 0; i < nb_lock; i++)
-+			lock[i] = LOCK_PERM;
-+
-+		ret = tee_client_invoke_func(ctx, &arg, param);
-+		if (ret < 0 || arg.ret != 0) {
-+			pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);
-+			if (!ret)
-+				ret = -EIO;
-+		}
-+		pr_debug("Lock upper OTPs %d to %d, ret=%d\n",
-+			 start / 4, start / 4 + nb_lock, ret);
-+	}
-+
-+	tee_shm_free(shm);
-+
-+out_tee_session:
-+	stm32_bsec_ta_close_session(ctx, session_id);
-+
-+	return ret;
-+}
---- /dev/null
-+++ b/drivers/nvmem/stm32-bsec-optee-ta.h
-@@ -0,0 +1,80 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+/*
-+ * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
-+ *
-+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
-+ */
-+
-+#if IS_ENABLED(CONFIG_NVMEM_STM32_BSEC_OPTEE_TA)
-+/**
-+ * stm32_bsec_optee_ta_open() - initialize the STM32 BSEC TA
-+ * @ctx: the OP-TEE context on success
-+ *
-+ * Return:
-+ *	On success, 0. On failure, -errno.
-+ */
-+int stm32_bsec_optee_ta_open(struct tee_context **ctx);
-+
-+/**
-+ * stm32_bsec_optee_ta_close() - release the STM32 BSEC TA
-+ * @ctx: the OP-TEE context
-+ *
-+ * This function used to clean the OP-TEE resources initialized in
-+ * stm32_bsec_optee_ta_open(); it can be used as callback to
-+ * devm_add_action_or_reset()
-+ */
-+void stm32_bsec_optee_ta_close(void *ctx);
-+
-+/**
-+ * stm32_bsec_optee_ta_read() - nvmem read access using TA client driver
-+ * @ctx: the OP-TEE context provided by stm32_bsec_optee_ta_open
-+ * @offset: nvmem offset
-+ * @buf: buffer to fill with nvem values
-+ * @bytes: number of bytes to read
-+ *
-+ * Return:
-+ *	On success, 0. On failure, -errno.
-+ */
-+int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
-+			     void *buf, size_t bytes);
-+
-+/**
-+ * stm32_bsec_optee_ta_write() - nvmem write access using TA client driver
-+ * @ctx: the OP-TEE context provided by stm32_bsec_optee_ta_open
-+ * @lower: number of lower OTP, not protected by ECC
-+ * @offset: nvmem offset
-+ * @buf: buffer with nvem values
-+ * @bytes: number of bytes to write
-+ *
-+ * Return:
-+ *	On success, 0. On failure, -errno.
-+ */
-+int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
-+			      unsigned int offset, void *buf, size_t bytes);
-+
-+#else
-+
-+static inline int stm32_bsec_optee_ta_open(struct tee_context **ctx)
-+{
-+	return -EOPNOTSUPP;
-+}
-+
-+static inline void stm32_bsec_optee_ta_close(void *ctx)
-+{
-+}
-+
-+static inline int stm32_bsec_optee_ta_read(struct tee_context *ctx,
-+					   unsigned int offset, void *buf,
-+					   size_t bytes)
-+{
-+	return -EOPNOTSUPP;
-+}
-+
-+static inline int stm32_bsec_optee_ta_write(struct tee_context *ctx,
-+					    unsigned int lower,
-+					    unsigned int offset, void *buf,
-+					    size_t bytes)
-+{
-+	return -EOPNOTSUPP;
-+}
-+#endif /* CONFIG_NVMEM_STM32_BSEC_OPTEE_TA */
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -11,6 +11,9 @@
- #include <linux/module.h>
- #include <linux/nvmem-provider.h>
- #include <linux/of_device.h>
-+#include <linux/tee_drv.h>
-+
-+#include "stm32-bsec-optee-ta.h"
- 
- /* BSEC secure service access from non-secure */
- #define STM32_SMC_BSEC			0x82001003
-@@ -25,12 +28,14 @@
- struct stm32_romem_cfg {
- 	int size;
- 	u8 lower;
-+	bool ta;
- };
- 
- struct stm32_romem_priv {
- 	void __iomem *base;
- 	struct nvmem_config cfg;
- 	u8 lower;
-+	struct tee_context *ctx;
- };
- 
- static int stm32_romem_read(void *context, unsigned int offset, void *buf,
-@@ -138,12 +143,29 @@ static int stm32_bsec_write(void *contex
- 	return 0;
- }
- 
-+static int stm32_bsec_pta_read(void *context, unsigned int offset, void *buf,
-+			       size_t bytes)
-+{
-+	struct stm32_romem_priv *priv = context;
-+
-+	return stm32_bsec_optee_ta_read(priv->ctx, offset, buf, bytes);
-+}
-+
-+static int stm32_bsec_pta_write(void *context, unsigned int offset, void *buf,
-+				size_t bytes)
-+{
-+	struct stm32_romem_priv *priv = context;
-+
-+	return stm32_bsec_optee_ta_write(priv->ctx, priv->lower, offset, buf, bytes);
-+}
-+
- static int stm32_romem_probe(struct platform_device *pdev)
- {
- 	const struct stm32_romem_cfg *cfg;
- 	struct device *dev = &pdev->dev;
- 	struct stm32_romem_priv *priv;
- 	struct resource *res;
-+	int rc;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
-@@ -173,15 +195,31 @@ static int stm32_romem_probe(struct plat
- 	} else {
- 		priv->cfg.size = cfg->size;
- 		priv->lower = cfg->lower;
--		priv->cfg.reg_read = stm32_bsec_read;
--		priv->cfg.reg_write = stm32_bsec_write;
-+		if (cfg->ta) {
-+			rc = stm32_bsec_optee_ta_open(&priv->ctx);
-+			/* wait for OP-TEE client driver to be up and ready */
-+			if (rc)
-+				return rc;
-+		}
-+		if (priv->ctx) {
-+			rc = devm_add_action_or_reset(dev, stm32_bsec_optee_ta_close, priv->ctx);
-+			if (rc) {
-+				dev_err(dev, "devm_add_action_or_reset() failed (%d)\n", rc);
-+				return rc;
-+			}
-+			priv->cfg.reg_read = stm32_bsec_pta_read;
-+			priv->cfg.reg_write = stm32_bsec_pta_write;
-+		} else {
-+			priv->cfg.reg_read = stm32_bsec_read;
-+			priv->cfg.reg_write = stm32_bsec_write;
-+		}
- 	}
- 
- 	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &priv->cfg));
- }
- 
- /*
-- * STM32MP15 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits)
-+ * STM32MP15/13 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits)
-  * => 96 x 32-bits data words
-  * - Lower: 1K bits, 2:1 redundancy, incremental bit programming
-  *   => 32 (x 32-bits) lower shadow registers = words 0 to 31
-@@ -191,6 +229,13 @@ static int stm32_romem_probe(struct plat
- static const struct stm32_romem_cfg stm32mp15_bsec_cfg = {
- 	.size = 384,
- 	.lower = 32,
-+	.ta = false,
-+};
-+
-+static const struct stm32_romem_cfg stm32mp13_bsec_cfg = {
-+	.size = 384,
-+	.lower = 32,
-+	.ta = true,
- };
- 
- static const struct of_device_id stm32_romem_of_match[] = {
-@@ -198,7 +243,10 @@ static const struct of_device_id stm32_r
- 		.compatible = "st,stm32mp15-bsec",
- 		.data = (void *)&stm32mp15_bsec_cfg,
- 	}, {
-+		.compatible = "st,stm32mp13-bsec",
-+		.data = (void *)&stm32mp13_bsec_cfg,
- 	},
-+	{ /* sentinel */ },
- };
- MODULE_DEVICE_TABLE(of, stm32_romem_of_match);
- 
diff --git a/target/linux/generic/backport-5.10/813-v6.3-0008-nvmem-stm32-detect-bsec-pta-presence-for-STM32MP15x.patch b/target/linux/generic/backport-5.10/813-v6.3-0008-nvmem-stm32-detect-bsec-pta-presence-for-STM32MP15x.patch
deleted file mode 100644
index cea8e93858fc..000000000000
--- a/target/linux/generic/backport-5.10/813-v6.3-0008-nvmem-stm32-detect-bsec-pta-presence-for-STM32MP15x.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From df2f34ef1d924125ffaf29dfdaf7cdbd3183c321 Mon Sep 17 00:00:00 2001
-From: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Date: Mon, 6 Feb 2023 13:43:52 +0000
-Subject: [PATCH] nvmem: stm32: detect bsec pta presence for STM32MP15x
-
-On STM32MP15x SoC, the SMC backend is optional when OP-TEE is used;
-the PTA BSEC should be used as it is done on STM32MP13x platform,
-but the BSEC SMC can be also used: it is a legacy mode in OP-TEE,
-not recommended but used in previous OP-TEE firmware.
-
-The presence of OP-TEE is dynamically detected in STM32MP15x device tree
-and the supported NVMEM backend is dynamically detected:
-- PTA with stm32_bsec_pta_find
-- SMC with stm32_bsec_check
-
-With OP-TEE but without PTA and SMC detection, the probe is deferred for
-STM32MP15x devices.
-
-On STM32MP13x platform, only the PTA is supported with cfg->ta = true
-and this detection is skipped.
-
-Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-19-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 38 +++++++++++++++++++++++++++++++++----
- 1 file changed, 34 insertions(+), 4 deletions(-)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -159,6 +159,31 @@ static int stm32_bsec_pta_write(void *co
- 	return stm32_bsec_optee_ta_write(priv->ctx, priv->lower, offset, buf, bytes);
- }
- 
-+static bool stm32_bsec_smc_check(void)
-+{
-+	u32 val;
-+	int ret;
-+
-+	/* check that the OP-TEE support the BSEC SMC (legacy mode) */
-+	ret = stm32_bsec_smc(STM32_SMC_READ_SHADOW, 0, 0, &val);
-+
-+	return !ret;
-+}
-+
-+static bool optee_presence_check(void)
-+{
-+	struct device_node *np;
-+	bool tee_detected = false;
-+
-+	/* check that the OP-TEE node is present and available. */
-+	np = of_find_compatible_node(NULL, NULL, "linaro,optee-tz");
-+	if (np && of_device_is_available(np))
-+		tee_detected = true;
-+	of_node_put(np);
-+
-+	return tee_detected;
-+}
-+
- static int stm32_romem_probe(struct platform_device *pdev)
- {
- 	const struct stm32_romem_cfg *cfg;
-@@ -195,11 +220,16 @@ static int stm32_romem_probe(struct plat
- 	} else {
- 		priv->cfg.size = cfg->size;
- 		priv->lower = cfg->lower;
--		if (cfg->ta) {
-+		if (cfg->ta || optee_presence_check()) {
- 			rc = stm32_bsec_optee_ta_open(&priv->ctx);
--			/* wait for OP-TEE client driver to be up and ready */
--			if (rc)
--				return rc;
-+			if (rc) {
-+				/* wait for OP-TEE client driver to be up and ready */
-+				if (rc == -EPROBE_DEFER)
-+					return -EPROBE_DEFER;
-+				/* BSEC PTA is required or SMC not supported */
-+				if (cfg->ta || !stm32_bsec_smc_check())
-+					return rc;
-+			}
- 		}
- 		if (priv->ctx) {
- 			rc = devm_add_action_or_reset(dev, stm32_bsec_optee_ta_close, priv->ctx);
diff --git a/target/linux/generic/backport-5.10/813-v6.3-0009-nvmem-rave-sp-eeprm-fix-kernel-doc-bad-line-warning.patch b/target/linux/generic/backport-5.10/813-v6.3-0009-nvmem-rave-sp-eeprm-fix-kernel-doc-bad-line-warning.patch
deleted file mode 100644
index 9d6275a737bc..000000000000
--- a/target/linux/generic/backport-5.10/813-v6.3-0009-nvmem-rave-sp-eeprm-fix-kernel-doc-bad-line-warning.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 3e5ac22aa564026e99defc3a8e02082521a5b231 Mon Sep 17 00:00:00 2001
-From: Randy Dunlap <rdunlap@infradead.org>
-Date: Mon, 6 Feb 2023 13:43:53 +0000
-Subject: [PATCH] nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
-
-Convert an empty line to " *" to avoid a kernel-doc warning:
-
-drivers/nvmem/rave-sp-eeprom.c:48: warning: bad line:
-
-Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
-Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Cc: Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>
-Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
-Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-20-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/rave-sp-eeprom.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/rave-sp-eeprom.c
-+++ b/drivers/nvmem/rave-sp-eeprom.c
-@@ -45,7 +45,7 @@ enum rave_sp_eeprom_header_size {
-  * @type:	Access type (see enum rave_sp_eeprom_access_type)
-  * @success:	Success flag (Success = 1, Failure = 0)
-  * @data:	Read data
--
-+ *
-  * Note this structure corresponds to RSP_*_EEPROM payload from RAVE
-  * SP ICD
-  */
diff --git a/target/linux/generic/backport-5.10/813-v6.3-0010-nvmem-qcom-spmi-sdam-register-at-device-init-time.patch b/target/linux/generic/backport-5.10/813-v6.3-0010-nvmem-qcom-spmi-sdam-register-at-device-init-time.patch
deleted file mode 100644
index 1ab9e609d33c..000000000000
--- a/target/linux/generic/backport-5.10/813-v6.3-0010-nvmem-qcom-spmi-sdam-register-at-device-init-time.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From eb7dda20f42a9137e9ee53d5ed3b743d49338cb5 Mon Sep 17 00:00:00 2001
-From: Johan Hovold <johan+linaro@kernel.org>
-Date: Mon, 6 Feb 2023 13:43:54 +0000
-Subject: [PATCH] nvmem: qcom-spmi-sdam: register at device init time
-
-There are currently no in-tree users of the Qualcomm SDAM nvmem driver
-and there is generally no point in registering a driver that can be
-built as a module at subsys init time.
-
-Register the driver at the normal device init time instead and let
-driver core sort out the probe order.
-
-Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
-Reviewed-by: Bjorn Andersson <andersson@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-21-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qcom-spmi-sdam.c | 13 +------------
- 1 file changed, 1 insertion(+), 12 deletions(-)
-
---- a/drivers/nvmem/qcom-spmi-sdam.c
-+++ b/drivers/nvmem/qcom-spmi-sdam.c
-@@ -175,18 +175,7 @@ static struct platform_driver sdam_drive
- 	},
- 	.probe		= sdam_probe,
- };
--
--static int __init sdam_init(void)
--{
--	return platform_driver_register(&sdam_driver);
--}
--subsys_initcall(sdam_init);
--
--static void __exit sdam_exit(void)
--{
--	return platform_driver_unregister(&sdam_driver);
--}
--module_exit(sdam_exit);
-+module_platform_driver(sdam_driver);
- 
- MODULE_DESCRIPTION("QCOM SPMI SDAM driver");
- MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/backport-5.10/813-v6.3-0011-nvmem-stm32-fix-OPTEE-dependency.patch b/target/linux/generic/backport-5.10/813-v6.3-0011-nvmem-stm32-fix-OPTEE-dependency.patch
deleted file mode 100644
index dcf704c6ffbb..000000000000
--- a/target/linux/generic/backport-5.10/813-v6.3-0011-nvmem-stm32-fix-OPTEE-dependency.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 1dc7e37bb0ec1c997fac82031332a38c7610352f Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Mon, 6 Feb 2023 13:43:56 +0000
-Subject: [PATCH] nvmem: stm32: fix OPTEE dependency
-
-The stm32 nvmem driver fails to link as built-in when OPTEE
-is a loadable module:
-
-aarch64-linux-ld: drivers/nvmem/stm32-bsec-optee-ta.o: in function `stm32_bsec:
-stm32-bsec-optee-ta.c:(.text+0xc8): undefined reference to `tee_client_open_session'
-aarch64-linux-ld: drivers/nvmem/stm32-bsec-optee-ta.o: in function `stm32_bsec:
-stm32-bsec-optee-ta.c:(.text+0x1fc): undefined reference to `tee_client_open_context'
-
-Change the CONFIG_NVMEM_STM32_ROMEM definition so it can only
-be built-in if OPTEE is either built-in or disabled, and
-make NVMEM_STM32_BSEC_OPTEE_TA a hidden symbol instead.
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-23-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -291,8 +291,7 @@ config NVMEM_SPRD_EFUSE
- 	  will be called nvmem-sprd-efuse.
- 
- config NVMEM_STM32_BSEC_OPTEE_TA
--	bool "STM32MP BSEC OP-TEE TA support for nvmem-stm32-romem driver"
--	depends on OPTEE
-+	def_bool NVMEM_STM32_ROMEM && OPTEE
- 	help
- 	  Say y here to enable the accesses to STM32MP SoC OTPs by the OP-TEE
- 	  trusted application STM32MP BSEC.
-@@ -303,7 +302,7 @@ config NVMEM_STM32_BSEC_OPTEE_TA
- config NVMEM_STM32_ROMEM
- 	tristate "STMicroelectronics STM32 factory-programmed memory support"
- 	depends on ARCH_STM32 || COMPILE_TEST
--	imply NVMEM_STM32_BSEC_OPTEE_TA
-+	depends on OPTEE || !OPTEE
- 	help
- 	  Say y here to enable read-only access for STMicroelectronics STM32
- 	  factory-programmed memory area.
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0001-nvmem-xilinx-zynqmp-make-modular.patch b/target/linux/generic/backport-5.10/814-v6.4-0001-nvmem-xilinx-zynqmp-make-modular.patch
deleted file mode 100644
index 8328e87c0af7..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0001-nvmem-xilinx-zynqmp-make-modular.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From bcd1fe07def0f070eb5f31594620aaee6f81d31a Mon Sep 17 00:00:00 2001
-From: Nick Alcock <nick.alcock@oracle.com>
-Date: Tue, 4 Apr 2023 18:21:11 +0100
-Subject: [PATCH] nvmem: xilinx: zynqmp: make modular
-
-This driver has a MODULE_LICENSE but is not tristate so cannot be
-built as a module, unlike all its peers: make it modular to match.
-
-Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
-Suggested-by: Michal Simek <michal.simek@amd.com>
-Cc: Luis Chamberlain <mcgrof@kernel.org>
-Cc: linux-modules@vger.kernel.org
-Cc: linux-kernel@vger.kernel.org
-Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
-Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Cc: Michal Simek <michal.simek@xilinx.com>
-Cc: linux-arm-kernel@lists.infradead.org
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-4-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -368,7 +368,7 @@ config NVMEM_VF610_OCOTP
- 	  be called nvmem-vf610-ocotp.
- 
- config NVMEM_ZYNQMP
--	bool "Xilinx ZYNQMP SoC nvmem firmware support"
-+	tristate "Xilinx ZYNQMP SoC nvmem firmware support"
- 	depends on ARCH_ZYNQMP
- 	help
- 	  This is a driver to access hardware related data like
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0002-nvmem-core-introduce-NVMEM-layouts.patch b/target/linux/generic/backport-5.10/814-v6.4-0002-nvmem-core-introduce-NVMEM-layouts.patch
deleted file mode 100644
index 8b886aea2e6f..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0002-nvmem-core-introduce-NVMEM-layouts.patch
+++ /dev/null
@@ -1,387 +0,0 @@
-From 266570f496b90dea8fda893c2cf7c28d63ae2bd9 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:21 +0100
-Subject: [PATCH] nvmem: core: introduce NVMEM layouts
-
-NVMEM layouts are used to generate NVMEM cells during runtime. Think of
-an EEPROM with a well-defined conent. For now, the content can be
-described by a device tree or a board file. But this only works if the
-offsets and lengths are static and don't change. One could also argue
-that putting the layout of the EEPROM in the device tree is the wrong
-place. Instead, the device tree should just have a specific compatible
-string.
-
-Right now there are two use cases:
- (1) The NVMEM cell needs special processing. E.g. if it only specifies
-     a base MAC address offset and you need to add an offset, or it
-     needs to parse a MAC from ASCII format or some proprietary format.
-     (Post processing of cells is added in a later commit).
- (2) u-boot environment parsing. The cells don't have a particular
-     offset but it needs parsing the content to determine the offsets
-     and length.
-
-Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-14-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- Documentation/driver-api/nvmem.rst |  15 ++++
- drivers/nvmem/Kconfig              |   4 +
- drivers/nvmem/Makefile             |   1 +
- drivers/nvmem/core.c               | 120 +++++++++++++++++++++++++++++
- drivers/nvmem/layouts/Kconfig      |   5 ++
- drivers/nvmem/layouts/Makefile     |   4 +
- include/linux/nvmem-consumer.h     |   7 ++
- include/linux/nvmem-provider.h     |  51 ++++++++++++
- 8 files changed, 207 insertions(+)
- create mode 100644 drivers/nvmem/layouts/Kconfig
- create mode 100644 drivers/nvmem/layouts/Makefile
-
---- a/Documentation/driver-api/nvmem.rst
-+++ b/Documentation/driver-api/nvmem.rst
-@@ -189,3 +189,18 @@ ex::
- =====================
- 
- See Documentation/devicetree/bindings/nvmem/nvmem.txt
-+
-+8. NVMEM layouts
-+================
-+
-+NVMEM layouts are yet another mechanism to create cells. With the device
-+tree binding it is possible to specify simple cells by using an offset
-+and a length. Sometimes, the cells doesn't have a static offset, but
-+the content is still well defined, e.g. tag-length-values. In this case,
-+the NVMEM device content has to be first parsed and the cells need to
-+be added accordingly. Layouts let you read the content of the NVMEM device
-+and let you add cells dynamically.
-+
-+Another use case for layouts is the post processing of cells. With layouts,
-+it is possible to associate a custom post processing hook to a cell. It
-+even possible to add this hook to cells not created by the layout itself.
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -21,6 +21,10 @@ config NVMEM_SYSFS
- 	 This interface is mostly used by userspace applications to
- 	 read/write directly into nvmem.
- 
-+# Layouts
-+
-+source "drivers/nvmem/layouts/Kconfig"
-+
- # Devices
- 
- config NVMEM_APPLE_EFUSES
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -5,6 +5,7 @@
- 
- obj-$(CONFIG_NVMEM)		+= nvmem_core.o
- nvmem_core-y			:= core.o
-+obj-y				+= layouts/
- 
- # Devices
- obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvmem-apple-efuses.o
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -40,6 +40,7 @@ struct nvmem_device {
- 	nvmem_reg_write_t	reg_write;
- 	nvmem_cell_post_process_t cell_post_process;
- 	struct gpio_desc	*wp_gpio;
-+	struct nvmem_layout	*layout;
- 	void *priv;
- };
- 
-@@ -74,6 +75,9 @@ static LIST_HEAD(nvmem_lookup_list);
- 
- static BLOCKING_NOTIFIER_HEAD(nvmem_notifier);
- 
-+static DEFINE_SPINLOCK(nvmem_layout_lock);
-+static LIST_HEAD(nvmem_layouts);
-+
- static int __nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
- 			    void *val, size_t bytes)
- {
-@@ -728,6 +732,101 @@ static int nvmem_add_cells_from_of(struc
- 	return 0;
- }
- 
-+int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner)
-+{
-+	layout->owner = owner;
-+
-+	spin_lock(&nvmem_layout_lock);
-+	list_add(&layout->node, &nvmem_layouts);
-+	spin_unlock(&nvmem_layout_lock);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(__nvmem_layout_register);
-+
-+void nvmem_layout_unregister(struct nvmem_layout *layout)
-+{
-+	spin_lock(&nvmem_layout_lock);
-+	list_del(&layout->node);
-+	spin_unlock(&nvmem_layout_lock);
-+}
-+EXPORT_SYMBOL_GPL(nvmem_layout_unregister);
-+
-+static struct nvmem_layout *nvmem_layout_get(struct nvmem_device *nvmem)
-+{
-+	struct device_node *layout_np, *np = nvmem->dev.of_node;
-+	struct nvmem_layout *l, *layout = NULL;
-+
-+	layout_np = of_get_child_by_name(np, "nvmem-layout");
-+	if (!layout_np)
-+		return NULL;
-+
-+	spin_lock(&nvmem_layout_lock);
-+
-+	list_for_each_entry(l, &nvmem_layouts, node) {
-+		if (of_match_node(l->of_match_table, layout_np)) {
-+			if (try_module_get(l->owner))
-+				layout = l;
-+
-+			break;
-+		}
-+	}
-+
-+	spin_unlock(&nvmem_layout_lock);
-+	of_node_put(layout_np);
-+
-+	return layout;
-+}
-+
-+static void nvmem_layout_put(struct nvmem_layout *layout)
-+{
-+	if (layout)
-+		module_put(layout->owner);
-+}
-+
-+static int nvmem_add_cells_from_layout(struct nvmem_device *nvmem)
-+{
-+	struct nvmem_layout *layout = nvmem->layout;
-+	int ret;
-+
-+	if (layout && layout->add_cells) {
-+		ret = layout->add_cells(&nvmem->dev, nvmem, layout);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+#if IS_ENABLED(CONFIG_OF)
-+/**
-+ * of_nvmem_layout_get_container() - Get OF node to layout container.
-+ *
-+ * @nvmem: nvmem device.
-+ *
-+ * Return: a node pointer with refcount incremented or NULL if no
-+ * container exists. Use of_node_put() on it when done.
-+ */
-+struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem)
-+{
-+	return of_get_child_by_name(nvmem->dev.of_node, "nvmem-layout");
-+}
-+EXPORT_SYMBOL_GPL(of_nvmem_layout_get_container);
-+#endif
-+
-+const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
-+					struct nvmem_layout *layout)
-+{
-+	struct device_node __maybe_unused *layout_np;
-+	const struct of_device_id *match;
-+
-+	layout_np = of_nvmem_layout_get_container(nvmem);
-+	match = of_match_node(layout->of_match_table, layout_np);
-+
-+	return match ? match->data : NULL;
-+}
-+EXPORT_SYMBOL_GPL(nvmem_layout_get_match_data);
-+
- /**
-  * nvmem_register() - Register a nvmem device for given nvmem_config.
-  * Also creates a binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
-@@ -834,6 +933,12 @@ struct nvmem_device *nvmem_register(cons
- 			goto err_put_device;
- 	}
- 
-+	/*
-+	 * If the driver supplied a layout by config->layout, the module
-+	 * pointer will be NULL and nvmem_layout_put() will be a noop.
-+	 */
-+	nvmem->layout = config->layout ?: nvmem_layout_get(nvmem);
-+
- 	if (config->cells) {
- 		rval = nvmem_add_cells(nvmem, config->cells, config->ncells);
- 		if (rval)
-@@ -854,12 +959,17 @@ struct nvmem_device *nvmem_register(cons
- 	if (rval)
- 		goto err_remove_cells;
- 
-+	rval = nvmem_add_cells_from_layout(nvmem);
-+	if (rval)
-+		goto err_remove_cells;
-+
- 	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);
- 
- 	return nvmem;
- 
- err_remove_cells:
- 	nvmem_device_remove_all_cells(nvmem);
-+	nvmem_layout_put(nvmem->layout);
- 	if (config->compat)
- 		nvmem_sysfs_remove_compat(nvmem, config);
- err_put_device:
-@@ -881,6 +991,7 @@ static void nvmem_device_release(struct
- 		device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
- 
- 	nvmem_device_remove_all_cells(nvmem);
-+	nvmem_layout_put(nvmem->layout);
- 	device_unregister(&nvmem->dev);
- }
- 
-@@ -1246,6 +1357,15 @@ struct nvmem_cell *of_nvmem_cell_get(str
- 		return ERR_PTR(-EINVAL);
- 	}
- 
-+	/* nvmem layouts produce cells within the nvmem-layout container */
-+	if (of_node_name_eq(nvmem_np, "nvmem-layout")) {
-+		nvmem_np = of_get_next_parent(nvmem_np);
-+		if (!nvmem_np) {
-+			of_node_put(cell_np);
-+			return ERR_PTR(-EINVAL);
-+		}
-+	}
-+
- 	nvmem = __nvmem_device_get(nvmem_np, device_match_of_node);
- 	of_node_put(nvmem_np);
- 	if (IS_ERR(nvmem)) {
---- /dev/null
-+++ b/drivers/nvmem/layouts/Kconfig
-@@ -0,0 +1,5 @@
-+# SPDX-License-Identifier: GPL-2.0
-+
-+menu "Layout Types"
-+
-+endmenu
---- /dev/null
-+++ b/drivers/nvmem/layouts/Makefile
-@@ -0,0 +1,4 @@
-+# SPDX-License-Identifier: GPL-2.0
-+#
-+# Makefile for nvmem layouts.
-+#
---- a/include/linux/nvmem-consumer.h
-+++ b/include/linux/nvmem-consumer.h
-@@ -225,6 +225,7 @@ struct nvmem_cell *of_nvmem_cell_get(str
- 				     const char *id);
- struct nvmem_device *of_nvmem_device_get(struct device_node *np,
- 					 const char *name);
-+struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem);
- #else
- static inline struct nvmem_cell *of_nvmem_cell_get(struct device_node *np,
- 						   const char *id)
-@@ -237,6 +238,12 @@ static inline struct nvmem_device *of_nv
- {
- 	return ERR_PTR(-EOPNOTSUPP);
- }
-+
-+static inline struct device_node *
-+of_nvmem_layout_get_container(struct nvmem_device *nvmem)
-+{
-+	return ERR_PTR(-EOPNOTSUPP);
-+}
- #endif /* CONFIG_NVMEM && CONFIG_OF */
- 
- #endif  /* ifndef _LINUX_NVMEM_CONSUMER_H */
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -88,6 +88,7 @@ struct nvmem_cell_info {
-  * @stride:	Minimum read/write access stride.
-  * @priv:	User context passed to read/write callbacks.
-  * @ignore_wp:  Write Protect pin is managed by the provider.
-+ * @layout:	Fixed layout associated with this nvmem device.
-  *
-  * Note: A default "nvmem<id>" name will be assigned to the device if
-  * no name is specified in its configuration. In such case "<id>" is
-@@ -110,6 +111,7 @@ struct nvmem_config {
- 	bool			root_only;
- 	struct device_node	*of_node;
- 	bool			ignore_wp;
-+	struct nvmem_layout	*layout;
- 	bool			no_of_node;
- 	nvmem_reg_read_t	reg_read;
- 	nvmem_reg_write_t	reg_write;
-@@ -142,6 +144,33 @@ struct nvmem_cell_table {
- 	struct list_head	node;
- };
- 
-+/**
-+ * struct nvmem_layout - NVMEM layout definitions
-+ *
-+ * @name:		Layout name.
-+ * @of_match_table:	Open firmware match table.
-+ * @add_cells:		Will be called if a nvmem device is found which
-+ *			has this layout. The function will add layout
-+ *			specific cells with nvmem_add_one_cell().
-+ * @owner:		Pointer to struct module.
-+ * @node:		List node.
-+ *
-+ * A nvmem device can hold a well defined structure which can just be
-+ * evaluated during runtime. For example a TLV list, or a list of "name=val"
-+ * pairs. A nvmem layout can parse the nvmem device and add appropriate
-+ * cells.
-+ */
-+struct nvmem_layout {
-+	const char *name;
-+	const struct of_device_id *of_match_table;
-+	int (*add_cells)(struct device *dev, struct nvmem_device *nvmem,
-+			 struct nvmem_layout *layout);
-+
-+	/* private */
-+	struct module *owner;
-+	struct list_head node;
-+};
-+
- #if IS_ENABLED(CONFIG_NVMEM)
- 
- struct nvmem_device *nvmem_register(const struct nvmem_config *cfg);
-@@ -156,6 +185,14 @@ void nvmem_del_cell_table(struct nvmem_c
- int nvmem_add_one_cell(struct nvmem_device *nvmem,
- 		       const struct nvmem_cell_info *info);
- 
-+int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner);
-+#define nvmem_layout_register(layout) \
-+	__nvmem_layout_register(layout, THIS_MODULE)
-+void nvmem_layout_unregister(struct nvmem_layout *layout);
-+
-+const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
-+					struct nvmem_layout *layout);
-+
- #else
- 
- static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c)
-@@ -179,5 +216,19 @@ static inline int nvmem_add_one_cell(str
- 	return -EOPNOTSUPP;
- }
- 
-+static inline int nvmem_layout_register(struct nvmem_layout *layout)
-+{
-+	return -EOPNOTSUPP;
-+}
-+
-+static inline void nvmem_layout_unregister(struct nvmem_layout *layout) {}
-+
-+static inline const void *
-+nvmem_layout_get_match_data(struct nvmem_device *nvmem,
-+			    struct nvmem_layout *layout)
-+{
-+	return NULL;
-+}
-+
- #endif /* CONFIG_NVMEM */
- #endif  /* ifndef _LINUX_NVMEM_PROVIDER_H */
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0003-nvmem-core-handle-the-absence-of-expected-layouts.patch b/target/linux/generic/backport-5.10/814-v6.4-0003-nvmem-core-handle-the-absence-of-expected-layouts.patch
deleted file mode 100644
index 6fa7b6382d89..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0003-nvmem-core-handle-the-absence-of-expected-layouts.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 6468a6f45148fb5e95c86b4efebf63f9abcd2137 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:22 +0100
-Subject: [PATCH] nvmem: core: handle the absence of expected layouts
-
-Make nvmem_layout_get() return -EPROBE_DEFER while the expected layout
-is not available. This condition cannot be triggered today as nvmem
-layout drivers are initialed as part of an early init call, but soon
-these drivers will be converted into modules and be initialized with a
-standard priority, so the unavailability of the drivers might become a
-reality that must be taken care of.
-
-Let's anticipate this by telling the caller the layout might not yet be
-available. A probe deferral is requested in this case.
-
-Please note this does not affect any nvmem device not using layouts,
-because an early check against the "nvmem-layout" container presence
-will return NULL in this case.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Tested-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-15-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 10 +++++++++-
- 1 file changed, 9 insertions(+), 1 deletion(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -755,7 +755,7 @@ EXPORT_SYMBOL_GPL(nvmem_layout_unregiste
- static struct nvmem_layout *nvmem_layout_get(struct nvmem_device *nvmem)
- {
- 	struct device_node *layout_np, *np = nvmem->dev.of_node;
--	struct nvmem_layout *l, *layout = NULL;
-+	struct nvmem_layout *l, *layout = ERR_PTR(-EPROBE_DEFER);
- 
- 	layout_np = of_get_child_by_name(np, "nvmem-layout");
- 	if (!layout_np)
-@@ -938,6 +938,13 @@ struct nvmem_device *nvmem_register(cons
- 	 * pointer will be NULL and nvmem_layout_put() will be a noop.
- 	 */
- 	nvmem->layout = config->layout ?: nvmem_layout_get(nvmem);
-+	if (IS_ERR(nvmem->layout)) {
-+		rval = PTR_ERR(nvmem->layout);
-+		nvmem->layout = NULL;
-+
-+		if (rval == -EPROBE_DEFER)
-+			goto err_teardown_compat;
-+	}
- 
- 	if (config->cells) {
- 		rval = nvmem_add_cells(nvmem, config->cells, config->ncells);
-@@ -970,6 +977,7 @@ struct nvmem_device *nvmem_register(cons
- err_remove_cells:
- 	nvmem_device_remove_all_cells(nvmem);
- 	nvmem_layout_put(nvmem->layout);
-+err_teardown_compat:
- 	if (config->compat)
- 		nvmem_sysfs_remove_compat(nvmem, config);
- err_put_device:
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0004-nvmem-core-request-layout-modules-loading.patch b/target/linux/generic/backport-5.10/814-v6.4-0004-nvmem-core-request-layout-modules-loading.patch
deleted file mode 100644
index b9341666f91f..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0004-nvmem-core-request-layout-modules-loading.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From b1c37bec1ccfe5ccab72bc0ddc0dfa45c43e2de2 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:23 +0100
-Subject: [PATCH] nvmem: core: request layout modules loading
-
-When a storage device like an eeprom or an mtd device probes, it
-registers an nvmem device if the nvmem subsystem has been enabled (bool
-symbol). During nvmem registration, if the device is using layouts to
-expose dynamic nvmem cells, the core will first try to get a reference
-over the layout driver callbacks. In practice there is not relationship
-that can be described between the storage driver and the nvmem
-layout. So there is no way we can enforce both drivers will be built-in
-or both will be modules. If the storage device driver is built-in but
-the layout is built as a module, instead of badly failing with an
-endless probe deferral loop, lets just make a modprobe call in case the
-driver was made available in an initramfs with
-of_device_node_request_module(), and offer a fully functional system to
-the user.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Tested-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-16-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -17,6 +17,7 @@
- #include <linux/nvmem-provider.h>
- #include <linux/gpio/consumer.h>
- #include <linux/of.h>
-+#include <linux/of_device.h>
- #include <linux/slab.h>
- 
- struct nvmem_device {
-@@ -761,6 +762,13 @@ static struct nvmem_layout *nvmem_layout
- 	if (!layout_np)
- 		return NULL;
- 
-+	/*
-+	 * In case the nvmem device was built-in while the layout was built as a
-+	 * module, we shall manually request the layout driver loading otherwise
-+	 * we'll never have any match.
-+	 */
-+	of_request_module(layout_np);
-+
- 	spin_lock(&nvmem_layout_lock);
- 
- 	list_for_each_entry(l, &nvmem_layouts, node) {
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0005-nvmem-core-add-per-cell-post-processing.patch b/target/linux/generic/backport-5.10/814-v6.4-0005-nvmem-core-add-per-cell-post-processing.patch
deleted file mode 100644
index 53628cd4e4ff..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0005-nvmem-core-add-per-cell-post-processing.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 345ec382cd4b736c36e01f155d08c913b225b736 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:24 +0100
-Subject: [PATCH] nvmem: core: add per-cell post processing
-
-Instead of relying on the name the consumer is using for the cell, like
-it is done for the nvmem .cell_post_process configuration parameter,
-provide a per-cell post processing hook. This can then be populated by
-the NVMEM provider (or the NVMEM layout) when adding the cell.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-17-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 17 +++++++++++++++++
- include/linux/nvmem-provider.h |  3 +++
- 2 files changed, 20 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -54,6 +54,7 @@ struct nvmem_cell_entry {
- 	int			bytes;
- 	int			bit_offset;
- 	int			nbits;
-+	nvmem_cell_post_process_t read_post_process;
- 	struct device_node	*np;
- 	struct nvmem_device	*nvmem;
- 	struct list_head	node;
-@@ -470,6 +471,7 @@ static int nvmem_cell_info_to_nvmem_cell
- 	cell->offset = info->offset;
- 	cell->bytes = info->bytes;
- 	cell->name = info->name;
-+	cell->read_post_process = info->read_post_process;
- 
- 	cell->bit_offset = info->bit_offset;
- 	cell->nbits = info->nbits;
-@@ -1563,6 +1565,13 @@ static int __nvmem_cell_read(struct nvme
- 	if (cell->bit_offset || cell->nbits)
- 		nvmem_shift_read_buffer_in_place(cell, buf);
- 
-+	if (cell->read_post_process) {
-+		rc = cell->read_post_process(nvmem->priv, id, index,
-+					     cell->offset, buf, cell->bytes);
-+		if (rc)
-+			return rc;
-+	}
-+
- 	if (nvmem->cell_post_process) {
- 		rc = nvmem->cell_post_process(nvmem->priv, id, index,
- 					      cell->offset, buf, cell->bytes);
-@@ -1671,6 +1680,14 @@ static int __nvmem_cell_entry_write(stru
- 	    (cell->bit_offset == 0 && len != cell->bytes))
- 		return -EINVAL;
- 
-+	/*
-+	 * Any cells which have a read_post_process hook are read-only because
-+	 * we cannot reverse the operation and it might affect other cells,
-+	 * too.
-+	 */
-+	if (cell->read_post_process)
-+		return -EINVAL;
-+
- 	if (cell->bit_offset || cell->nbits) {
- 		buf = nvmem_cell_prepare_write_buffer(cell, buf, len);
- 		if (IS_ERR(buf))
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -54,6 +54,8 @@ struct nvmem_keepout {
-  * @bit_offset:	Bit offset if cell is smaller than a byte.
-  * @nbits:	Number of bits.
-  * @np:		Optional device_node pointer.
-+ * @read_post_process:	Callback for optional post processing of cell data
-+ *			on reads.
-  */
- struct nvmem_cell_info {
- 	const char		*name;
-@@ -62,6 +64,7 @@ struct nvmem_cell_info {
- 	unsigned int		bit_offset;
- 	unsigned int		nbits;
- 	struct device_node	*np;
-+	nvmem_cell_post_process_t read_post_process;
- };
- 
- /**
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0006-nvmem-core-allow-to-modify-a-cell-before-adding-it.patch b/target/linux/generic/backport-5.10/814-v6.4-0006-nvmem-core-allow-to-modify-a-cell-before-adding-it.patch
deleted file mode 100644
index 32990148c806..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0006-nvmem-core-allow-to-modify-a-cell-before-adding-it.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From de12c9691501ccba41a154c223869f82be4c12fd Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:25 +0100
-Subject: [PATCH] nvmem: core: allow to modify a cell before adding it
-
-Provide a way to modify a cell before it will get added. This is useful
-to attach a custom post processing hook via a layout.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-18-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 4 ++++
- include/linux/nvmem-provider.h | 5 +++++
- 2 files changed, 9 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -695,6 +695,7 @@ static int nvmem_validate_keepouts(struc
- 
- static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
- {
-+	struct nvmem_layout *layout = nvmem->layout;
- 	struct device *dev = &nvmem->dev;
- 	struct device_node *child;
- 	const __be32 *addr;
-@@ -724,6 +725,9 @@ static int nvmem_add_cells_from_of(struc
- 
- 		info.np = of_node_get(child);
- 
-+		if (layout && layout->fixup_cell_info)
-+			layout->fixup_cell_info(nvmem, layout, &info);
-+
- 		ret = nvmem_add_one_cell(nvmem, &info);
- 		kfree(info.name);
- 		if (ret) {
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -155,6 +155,8 @@ struct nvmem_cell_table {
-  * @add_cells:		Will be called if a nvmem device is found which
-  *			has this layout. The function will add layout
-  *			specific cells with nvmem_add_one_cell().
-+ * @fixup_cell_info:	Will be called before a cell is added. Can be
-+ *			used to modify the nvmem_cell_info.
-  * @owner:		Pointer to struct module.
-  * @node:		List node.
-  *
-@@ -168,6 +170,9 @@ struct nvmem_layout {
- 	const struct of_device_id *of_match_table;
- 	int (*add_cells)(struct device *dev, struct nvmem_device *nvmem,
- 			 struct nvmem_layout *layout);
-+	void (*fixup_cell_info)(struct nvmem_device *nvmem,
-+				struct nvmem_layout *layout,
-+				struct nvmem_cell_info *cell);
- 
- 	/* private */
- 	struct module *owner;
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0007-nvmem-imx-ocotp-replace-global-post-processing-with-.patch b/target/linux/generic/backport-5.10/814-v6.4-0007-nvmem-imx-ocotp-replace-global-post-processing-with-.patch
deleted file mode 100644
index 2a5fa618ea65..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0007-nvmem-imx-ocotp-replace-global-post-processing-with-.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 6c56a82d7895a213a43182a5d01a21a906a79847 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:26 +0100
-Subject: [PATCH] nvmem: imx-ocotp: replace global post processing with layouts
-
-In preparation of retiring the global post processing hook change this
-driver to use layouts. The layout will be supplied during registration
-and will be used to add the post processing hook to all added cells.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Tested-by: Michael Walle <michael@walle.cc> # on kontron-pitx-imx8m
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-19-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/imx-ocotp.c | 30 +++++++++++++++++++-----------
- 1 file changed, 19 insertions(+), 11 deletions(-)
-
---- a/drivers/nvmem/imx-ocotp.c
-+++ b/drivers/nvmem/imx-ocotp.c
-@@ -225,18 +225,13 @@ read_end:
- static int imx_ocotp_cell_pp(void *context, const char *id, int index,
- 			     unsigned int offset, void *data, size_t bytes)
- {
--	struct ocotp_priv *priv = context;
-+	u8 *buf = data;
-+	int i;
- 
- 	/* Deal with some post processing of nvmem cell data */
--	if (id && !strcmp(id, "mac-address")) {
--		if (priv->params->reverse_mac_address) {
--			u8 *buf = data;
--			int i;
--
--			for (i = 0; i < bytes/2; i++)
--				swap(buf[i], buf[bytes - i - 1]);
--		}
--	}
-+	if (id && !strcmp(id, "mac-address"))
-+		for (i = 0; i < bytes / 2; i++)
-+			swap(buf[i], buf[bytes - i - 1]);
- 
- 	return 0;
- }
-@@ -488,7 +483,6 @@ static struct nvmem_config imx_ocotp_nvm
- 	.stride = 1,
- 	.reg_read = imx_ocotp_read,
- 	.reg_write = imx_ocotp_write,
--	.cell_post_process = imx_ocotp_cell_pp,
- };
- 
- static const struct ocotp_params imx6q_params = {
-@@ -595,6 +589,17 @@ static const struct of_device_id imx_oco
- };
- MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
- 
-+static void imx_ocotp_fixup_cell_info(struct nvmem_device *nvmem,
-+				      struct nvmem_layout *layout,
-+				      struct nvmem_cell_info *cell)
-+{
-+	cell->read_post_process = imx_ocotp_cell_pp;
-+}
-+
-+struct nvmem_layout imx_ocotp_layout = {
-+	.fixup_cell_info = imx_ocotp_fixup_cell_info,
-+};
-+
- static int imx_ocotp_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-@@ -619,6 +624,9 @@ static int imx_ocotp_probe(struct platfo
- 	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
- 	imx_ocotp_nvmem_config.dev = dev;
- 	imx_ocotp_nvmem_config.priv = priv;
-+	if (priv->params->reverse_mac_address)
-+		imx_ocotp_nvmem_config.layout = &imx_ocotp_layout;
-+
- 	priv->config = &imx_ocotp_nvmem_config;
- 
- 	clk_prepare_enable(priv->clk);
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0008-nvmem-cell-drop-global-cell_post_process.patch b/target/linux/generic/backport-5.10/814-v6.4-0008-nvmem-cell-drop-global-cell_post_process.patch
deleted file mode 100644
index eac202b88298..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0008-nvmem-cell-drop-global-cell_post_process.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 011e40a166fdaa65fb9946b7cd91efec85b70dbb Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:27 +0100
-Subject: [PATCH] nvmem: cell: drop global cell_post_process
-
-There are no users anymore for the global cell_post_process callback
-anymore. New users should use proper nvmem layouts.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-20-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 9 ---------
- include/linux/nvmem-provider.h | 2 --
- 2 files changed, 11 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -39,7 +39,6 @@ struct nvmem_device {
- 	unsigned int		nkeepout;
- 	nvmem_reg_read_t	reg_read;
- 	nvmem_reg_write_t	reg_write;
--	nvmem_cell_post_process_t cell_post_process;
- 	struct gpio_desc	*wp_gpio;
- 	struct nvmem_layout	*layout;
- 	void *priv;
-@@ -903,7 +902,6 @@ struct nvmem_device *nvmem_register(cons
- 	nvmem->type = config->type;
- 	nvmem->reg_read = config->reg_read;
- 	nvmem->reg_write = config->reg_write;
--	nvmem->cell_post_process = config->cell_post_process;
- 	nvmem->keepout = config->keepout;
- 	nvmem->nkeepout = config->nkeepout;
- 	if (config->of_node)
-@@ -1575,13 +1573,6 @@ static int __nvmem_cell_read(struct nvme
- 		if (rc)
- 			return rc;
- 	}
--
--	if (nvmem->cell_post_process) {
--		rc = nvmem->cell_post_process(nvmem->priv, id, index,
--					      cell->offset, buf, cell->bytes);
--		if (rc)
--			return rc;
--	}
- 
- 	if (len)
- 		*len = cell->bytes;
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -85,7 +85,6 @@ struct nvmem_cell_info {
-  * @no_of_node:	Device should not use the parent's of_node even if it's !NULL.
-  * @reg_read:	Callback to read data.
-  * @reg_write:	Callback to write data.
-- * @cell_post_process:	Callback for vendor specific post processing of cell data
-  * @size:	Device size.
-  * @word_size:	Minimum read/write access granularity.
-  * @stride:	Minimum read/write access stride.
-@@ -118,7 +117,6 @@ struct nvmem_config {
- 	bool			no_of_node;
- 	nvmem_reg_read_t	reg_read;
- 	nvmem_reg_write_t	reg_write;
--	nvmem_cell_post_process_t cell_post_process;
- 	int	size;
- 	int	word_size;
- 	int	stride;
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0009-nvmem-core-provide-own-priv-pointer-in-post-process-.patch b/target/linux/generic/backport-5.10/814-v6.4-0009-nvmem-core-provide-own-priv-pointer-in-post-process-.patch
deleted file mode 100644
index 46b30a2ed904..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0009-nvmem-core-provide-own-priv-pointer-in-post-process-.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 8a134fd9f9323f4c39ec27055b3d3723cfb5c1e9 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:28 +0100
-Subject: [PATCH] nvmem: core: provide own priv pointer in post process
- callback
-
-It doesn't make any more sense to have a opaque pointer set up by the
-nvmem device. Usually, the layout isn't associated with a particular
-nvmem device. Instead, let the caller who set the post process callback
-provide the priv pointer.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-21-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 4 +++-
- include/linux/nvmem-provider.h | 5 ++++-
- 2 files changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -54,6 +54,7 @@ struct nvmem_cell_entry {
- 	int			bit_offset;
- 	int			nbits;
- 	nvmem_cell_post_process_t read_post_process;
-+	void			*priv;
- 	struct device_node	*np;
- 	struct nvmem_device	*nvmem;
- 	struct list_head	node;
-@@ -471,6 +472,7 @@ static int nvmem_cell_info_to_nvmem_cell
- 	cell->bytes = info->bytes;
- 	cell->name = info->name;
- 	cell->read_post_process = info->read_post_process;
-+	cell->priv = info->priv;
- 
- 	cell->bit_offset = info->bit_offset;
- 	cell->nbits = info->nbits;
-@@ -1568,7 +1570,7 @@ static int __nvmem_cell_read(struct nvme
- 		nvmem_shift_read_buffer_in_place(cell, buf);
- 
- 	if (cell->read_post_process) {
--		rc = cell->read_post_process(nvmem->priv, id, index,
-+		rc = cell->read_post_process(cell->priv, id, index,
- 					     cell->offset, buf, cell->bytes);
- 		if (rc)
- 			return rc;
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -20,7 +20,8 @@ typedef int (*nvmem_reg_write_t)(void *p
- 				 void *val, size_t bytes);
- /* used for vendor specific post processing of cell data */
- typedef int (*nvmem_cell_post_process_t)(void *priv, const char *id, int index,
--					 unsigned int offset, void *buf, size_t bytes);
-+					 unsigned int offset, void *buf,
-+					 size_t bytes);
- 
- enum nvmem_type {
- 	NVMEM_TYPE_UNKNOWN = 0,
-@@ -56,6 +57,7 @@ struct nvmem_keepout {
-  * @np:		Optional device_node pointer.
-  * @read_post_process:	Callback for optional post processing of cell data
-  *			on reads.
-+ * @priv:	Opaque data passed to the read_post_process hook.
-  */
- struct nvmem_cell_info {
- 	const char		*name;
-@@ -65,6 +67,7 @@ struct nvmem_cell_info {
- 	unsigned int		nbits;
- 	struct device_node	*np;
- 	nvmem_cell_post_process_t read_post_process;
-+	void			*priv;
- };
- 
- /**
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0010-nvmem-layouts-sl28vpd-Add-new-layout-driver.patch b/target/linux/generic/backport-5.10/814-v6.4-0010-nvmem-layouts-sl28vpd-Add-new-layout-driver.patch
deleted file mode 100644
index 7d97658b60e2..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0010-nvmem-layouts-sl28vpd-Add-new-layout-driver.patch
+++ /dev/null
@@ -1,215 +0,0 @@
-From d9fae023fe86069750092fc1c2f3a73e2fb18512 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:29 +0100
-Subject: [PATCH] nvmem: layouts: sl28vpd: Add new layout driver
-
-This layout applies to the VPD of the Kontron sl28 boards. The VPD only
-contains a base MAC address. Therefore, we have to add an individual
-offset to it. This is done by taking the second argument of the nvmem
-phandle into account. Also this let us checking the VPD version and the
-checksum.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-22-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/Kconfig   |   9 ++
- drivers/nvmem/layouts/Makefile  |   2 +
- drivers/nvmem/layouts/sl28vpd.c | 165 ++++++++++++++++++++++++++++++++
- 3 files changed, 176 insertions(+)
- create mode 100644 drivers/nvmem/layouts/sl28vpd.c
-
---- a/drivers/nvmem/layouts/Kconfig
-+++ b/drivers/nvmem/layouts/Kconfig
-@@ -2,4 +2,13 @@
- 
- menu "Layout Types"
- 
-+config NVMEM_LAYOUT_SL28_VPD
-+	tristate "Kontron sl28 VPD layout support"
-+	select CRC8
-+	help
-+	  Say Y here if you want to support the VPD layout of the Kontron
-+	  SMARC-sAL28 boards.
-+
-+	  If unsure, say N.
-+
- endmenu
---- a/drivers/nvmem/layouts/Makefile
-+++ b/drivers/nvmem/layouts/Makefile
-@@ -2,3 +2,5 @@
- #
- # Makefile for nvmem layouts.
- #
-+
-+obj-$(CONFIG_NVMEM_LAYOUT_SL28_VPD) += sl28vpd.o
---- /dev/null
-+++ b/drivers/nvmem/layouts/sl28vpd.c
-@@ -0,0 +1,165 @@
-+// SPDX-License-Identifier: GPL-2.0
-+
-+#include <linux/crc8.h>
-+#include <linux/etherdevice.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of.h>
-+#include <uapi/linux/if_ether.h>
-+
-+#define SL28VPD_MAGIC 'V'
-+
-+struct sl28vpd_header {
-+	u8 magic;
-+	u8 version;
-+} __packed;
-+
-+struct sl28vpd_v1 {
-+	struct sl28vpd_header header;
-+	char serial_number[15];
-+	u8 base_mac_address[ETH_ALEN];
-+	u8 crc8;
-+} __packed;
-+
-+static int sl28vpd_mac_address_pp(void *priv, const char *id, int index,
-+				  unsigned int offset, void *buf,
-+				  size_t bytes)
-+{
-+	if (bytes != ETH_ALEN)
-+		return -EINVAL;
-+
-+	if (index < 0)
-+		return -EINVAL;
-+
-+	if (!is_valid_ether_addr(buf))
-+		return -EINVAL;
-+
-+	eth_addr_add(buf, index);
-+
-+	return 0;
-+}
-+
-+static const struct nvmem_cell_info sl28vpd_v1_entries[] = {
-+	{
-+		.name = "serial-number",
-+		.offset = offsetof(struct sl28vpd_v1, serial_number),
-+		.bytes = sizeof_field(struct sl28vpd_v1, serial_number),
-+	},
-+	{
-+		.name = "base-mac-address",
-+		.offset = offsetof(struct sl28vpd_v1, base_mac_address),
-+		.bytes = sizeof_field(struct sl28vpd_v1, base_mac_address),
-+		.read_post_process = sl28vpd_mac_address_pp,
-+	},
-+};
-+
-+static int sl28vpd_v1_check_crc(struct device *dev, struct nvmem_device *nvmem)
-+{
-+	struct sl28vpd_v1 data_v1;
-+	u8 table[CRC8_TABLE_SIZE];
-+	int ret;
-+	u8 crc;
-+
-+	crc8_populate_msb(table, 0x07);
-+
-+	ret = nvmem_device_read(nvmem, 0, sizeof(data_v1), &data_v1);
-+	if (ret < 0)
-+		return ret;
-+	else if (ret != sizeof(data_v1))
-+		return -EIO;
-+
-+	crc = crc8(table, (void *)&data_v1, sizeof(data_v1) - 1, 0);
-+
-+	if (crc != data_v1.crc8) {
-+		dev_err(dev,
-+			"Checksum is invalid (got %02x, expected %02x).\n",
-+			crc, data_v1.crc8);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static int sl28vpd_add_cells(struct device *dev, struct nvmem_device *nvmem,
-+			     struct nvmem_layout *layout)
-+{
-+	const struct nvmem_cell_info *pinfo;
-+	struct nvmem_cell_info info = {0};
-+	struct device_node *layout_np;
-+	struct sl28vpd_header hdr;
-+	int ret, i;
-+
-+	/* check header */
-+	ret = nvmem_device_read(nvmem, 0, sizeof(hdr), &hdr);
-+	if (ret < 0)
-+		return ret;
-+	else if (ret != sizeof(hdr))
-+		return -EIO;
-+
-+	if (hdr.magic != SL28VPD_MAGIC) {
-+		dev_err(dev, "Invalid magic value (%02x)\n", hdr.magic);
-+		return -EINVAL;
-+	}
-+
-+	if (hdr.version != 1) {
-+		dev_err(dev, "Version %d is unsupported.\n", hdr.version);
-+		return -EINVAL;
-+	}
-+
-+	ret = sl28vpd_v1_check_crc(dev, nvmem);
-+	if (ret)
-+		return ret;
-+
-+	layout_np = of_nvmem_layout_get_container(nvmem);
-+	if (!layout_np)
-+		return -ENOENT;
-+
-+	for (i = 0; i < ARRAY_SIZE(sl28vpd_v1_entries); i++) {
-+		pinfo = &sl28vpd_v1_entries[i];
-+
-+		info.name = pinfo->name;
-+		info.offset = pinfo->offset;
-+		info.bytes = pinfo->bytes;
-+		info.read_post_process = pinfo->read_post_process;
-+		info.np = of_get_child_by_name(layout_np, pinfo->name);
-+
-+		ret = nvmem_add_one_cell(nvmem, &info);
-+		if (ret) {
-+			of_node_put(layout_np);
-+			return ret;
-+		}
-+	}
-+
-+	of_node_put(layout_np);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id sl28vpd_of_match_table[] = {
-+	{ .compatible = "kontron,sl28-vpd" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, sl28vpd_of_match_table);
-+
-+struct nvmem_layout sl28vpd_layout = {
-+	.name = "sl28-vpd",
-+	.of_match_table = sl28vpd_of_match_table,
-+	.add_cells = sl28vpd_add_cells,
-+};
-+
-+static int __init sl28vpd_init(void)
-+{
-+	return nvmem_layout_register(&sl28vpd_layout);
-+}
-+
-+static void __exit sl28vpd_exit(void)
-+{
-+	nvmem_layout_unregister(&sl28vpd_layout);
-+}
-+
-+module_init(sl28vpd_init);
-+module_exit(sl28vpd_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
-+MODULE_DESCRIPTION("NVMEM layout driver for the VPD of Kontron sl28 boards");
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0011-nvmem-layouts-onie-tlv-Add-new-layout-driver.patch b/target/linux/generic/backport-5.10/814-v6.4-0011-nvmem-layouts-onie-tlv-Add-new-layout-driver.patch
deleted file mode 100644
index ca8b4bc06914..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0011-nvmem-layouts-onie-tlv-Add-new-layout-driver.patch
+++ /dev/null
@@ -1,306 +0,0 @@
-From d3c0d12f6474216bf386101e2449cc73e5c5b61d Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:31 +0100
-Subject: [PATCH] nvmem: layouts: onie-tlv: Add new layout driver
-
-This layout applies on top of any non volatile storage device containing
-an ONIE table factory flashed. This table follows the tlv
-(type-length-value) organization described in the link below. We cannot
-afford using regular parsers because the content of these tables is
-manufacturer specific and must be dynamically discovered.
-
-Link: https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-24-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/Kconfig    |   9 ++
- drivers/nvmem/layouts/Makefile   |   1 +
- drivers/nvmem/layouts/onie-tlv.c | 257 +++++++++++++++++++++++++++++++
- 3 files changed, 267 insertions(+)
- create mode 100644 drivers/nvmem/layouts/onie-tlv.c
-
---- a/drivers/nvmem/layouts/Kconfig
-+++ b/drivers/nvmem/layouts/Kconfig
-@@ -11,4 +11,13 @@ config NVMEM_LAYOUT_SL28_VPD
- 
- 	  If unsure, say N.
- 
-+config NVMEM_LAYOUT_ONIE_TLV
-+	tristate "ONIE tlv support"
-+	select CRC32
-+	help
-+	  Say Y here if you want to support the Open Compute Project ONIE
-+	  Type-Length-Value standard table.
-+
-+	  If unsure, say N.
-+
- endmenu
---- a/drivers/nvmem/layouts/Makefile
-+++ b/drivers/nvmem/layouts/Makefile
-@@ -4,3 +4,4 @@
- #
- 
- obj-$(CONFIG_NVMEM_LAYOUT_SL28_VPD) += sl28vpd.o
-+obj-$(CONFIG_NVMEM_LAYOUT_ONIE_TLV) += onie-tlv.o
---- /dev/null
-+++ b/drivers/nvmem/layouts/onie-tlv.c
-@@ -0,0 +1,257 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * ONIE tlv NVMEM cells provider
-+ *
-+ * Copyright (C) 2022 Open Compute Group ONIE
-+ * Author: Miquel Raynal <miquel.raynal@bootlin.com>
-+ * Based on the nvmem driver written by: Vadym Kochan <vadym.kochan@plvision.eu>
-+ * Inspired by the first layout written by: Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/crc32.h>
-+#include <linux/etherdevice.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of.h>
-+
-+#define ONIE_TLV_MAX_LEN 2048
-+#define ONIE_TLV_CRC_FIELD_SZ 6
-+#define ONIE_TLV_CRC_SZ 4
-+#define ONIE_TLV_HDR_ID	"TlvInfo"
-+
-+struct onie_tlv_hdr {
-+	u8 id[8];
-+	u8 version;
-+	__be16 data_len;
-+} __packed;
-+
-+struct onie_tlv {
-+	u8 type;
-+	u8 len;
-+} __packed;
-+
-+static const char *onie_tlv_cell_name(u8 type)
-+{
-+	switch (type) {
-+	case 0x21:
-+		return "product-name";
-+	case 0x22:
-+		return "part-number";
-+	case 0x23:
-+		return "serial-number";
-+	case 0x24:
-+		return "mac-address";
-+	case 0x25:
-+		return "manufacture-date";
-+	case 0x26:
-+		return "device-version";
-+	case 0x27:
-+		return "label-revision";
-+	case 0x28:
-+		return "platform-name";
-+	case 0x29:
-+		return "onie-version";
-+	case 0x2A:
-+		return "num-macs";
-+	case 0x2B:
-+		return "manufacturer";
-+	case 0x2C:
-+		return "country-code";
-+	case 0x2D:
-+		return "vendor";
-+	case 0x2E:
-+		return "diag-version";
-+	case 0x2F:
-+		return "service-tag";
-+	case 0xFD:
-+		return "vendor-extension";
-+	case 0xFE:
-+		return "crc32";
-+	default:
-+		break;
-+	}
-+
-+	return NULL;
-+}
-+
-+static int onie_tlv_mac_read_cb(void *priv, const char *id, int index,
-+				unsigned int offset, void *buf,
-+				size_t bytes)
-+{
-+	eth_addr_add(buf, index);
-+
-+	return 0;
-+}
-+
-+static nvmem_cell_post_process_t onie_tlv_read_cb(u8 type, u8 *buf)
-+{
-+	switch (type) {
-+	case 0x24:
-+		return &onie_tlv_mac_read_cb;
-+	default:
-+		break;
-+	}
-+
-+	return NULL;
-+}
-+
-+static int onie_tlv_add_cells(struct device *dev, struct nvmem_device *nvmem,
-+			      size_t data_len, u8 *data)
-+{
-+	struct nvmem_cell_info cell = {};
-+	struct device_node *layout;
-+	struct onie_tlv tlv;
-+	unsigned int hdr_len = sizeof(struct onie_tlv_hdr);
-+	unsigned int offset = 0;
-+	int ret;
-+
-+	layout = of_nvmem_layout_get_container(nvmem);
-+	if (!layout)
-+		return -ENOENT;
-+
-+	while (offset < data_len) {
-+		memcpy(&tlv, data + offset, sizeof(tlv));
-+		if (offset + tlv.len >= data_len) {
-+			dev_err(dev, "Out of bounds field (0x%x bytes at 0x%x)\n",
-+				tlv.len, hdr_len + offset);
-+			break;
-+		}
-+
-+		cell.name = onie_tlv_cell_name(tlv.type);
-+		if (!cell.name)
-+			continue;
-+
-+		cell.offset = hdr_len + offset + sizeof(tlv.type) + sizeof(tlv.len);
-+		cell.bytes = tlv.len;
-+		cell.np = of_get_child_by_name(layout, cell.name);
-+		cell.read_post_process = onie_tlv_read_cb(tlv.type, data + offset + sizeof(tlv));
-+
-+		ret = nvmem_add_one_cell(nvmem, &cell);
-+		if (ret) {
-+			of_node_put(layout);
-+			return ret;
-+		}
-+
-+		offset += sizeof(tlv) + tlv.len;
-+	}
-+
-+	of_node_put(layout);
-+
-+	return 0;
-+}
-+
-+static bool onie_tlv_hdr_is_valid(struct device *dev, struct onie_tlv_hdr *hdr)
-+{
-+	if (memcmp(hdr->id, ONIE_TLV_HDR_ID, sizeof(hdr->id))) {
-+		dev_err(dev, "Invalid header\n");
-+		return false;
-+	}
-+
-+	if (hdr->version != 0x1) {
-+		dev_err(dev, "Invalid version number\n");
-+		return false;
-+	}
-+
-+	return true;
-+}
-+
-+static bool onie_tlv_crc_is_valid(struct device *dev, size_t table_len, u8 *table)
-+{
-+	struct onie_tlv crc_hdr;
-+	u32 read_crc, calc_crc;
-+	__be32 crc_be;
-+
-+	memcpy(&crc_hdr, table + table_len - ONIE_TLV_CRC_FIELD_SZ, sizeof(crc_hdr));
-+	if (crc_hdr.type != 0xfe || crc_hdr.len != ONIE_TLV_CRC_SZ) {
-+		dev_err(dev, "Invalid CRC field\n");
-+		return false;
-+	}
-+
-+	/* The table contains a JAMCRC, which is XOR'ed compared to the original
-+	 * CRC32 implementation as known in the Ethernet world.
-+	 */
-+	memcpy(&crc_be, table + table_len - ONIE_TLV_CRC_SZ, ONIE_TLV_CRC_SZ);
-+	read_crc = be32_to_cpu(crc_be);
-+	calc_crc = crc32(~0, table, table_len - ONIE_TLV_CRC_SZ) ^ 0xFFFFFFFF;
-+	if (read_crc != calc_crc) {
-+		dev_err(dev, "Invalid CRC read: 0x%08x, expected: 0x%08x\n",
-+			read_crc, calc_crc);
-+		return false;
-+	}
-+
-+	return true;
-+}
-+
-+static int onie_tlv_parse_table(struct device *dev, struct nvmem_device *nvmem,
-+				struct nvmem_layout *layout)
-+{
-+	struct onie_tlv_hdr hdr;
-+	size_t table_len, data_len, hdr_len;
-+	u8 *table, *data;
-+	int ret;
-+
-+	ret = nvmem_device_read(nvmem, 0, sizeof(hdr), &hdr);
-+	if (ret < 0)
-+		return ret;
-+
-+	if (!onie_tlv_hdr_is_valid(dev, &hdr)) {
-+		dev_err(dev, "Invalid ONIE TLV header\n");
-+		return -EINVAL;
-+	}
-+
-+	hdr_len = sizeof(hdr.id) + sizeof(hdr.version) + sizeof(hdr.data_len);
-+	data_len = be16_to_cpu(hdr.data_len);
-+	table_len = hdr_len + data_len;
-+	if (table_len > ONIE_TLV_MAX_LEN) {
-+		dev_err(dev, "Invalid ONIE TLV data length\n");
-+		return -EINVAL;
-+	}
-+
-+	table = devm_kmalloc(dev, table_len, GFP_KERNEL);
-+	if (!table)
-+		return -ENOMEM;
-+
-+	ret = nvmem_device_read(nvmem, 0, table_len, table);
-+	if (ret != table_len)
-+		return ret;
-+
-+	if (!onie_tlv_crc_is_valid(dev, table_len, table))
-+		return -EINVAL;
-+
-+	data = table + hdr_len;
-+	ret = onie_tlv_add_cells(dev, nvmem, data_len, data);
-+	if (ret)
-+		return ret;
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id onie_tlv_of_match_table[] = {
-+	{ .compatible = "onie,tlv-layout", },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, onie_tlv_of_match_table);
-+
-+static struct nvmem_layout onie_tlv_layout = {
-+	.name = "ONIE tlv layout",
-+	.of_match_table = onie_tlv_of_match_table,
-+	.add_cells = onie_tlv_parse_table,
-+};
-+
-+static int __init onie_tlv_init(void)
-+{
-+	return nvmem_layout_register(&onie_tlv_layout);
-+}
-+
-+static void __exit onie_tlv_exit(void)
-+{
-+	nvmem_layout_unregister(&onie_tlv_layout);
-+}
-+
-+module_init(onie_tlv_init);
-+module_exit(onie_tlv_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
-+MODULE_DESCRIPTION("NVMEM layout driver for Onie TLV table parsing");
-+MODULE_ALIAS("NVMEM layout driver for Onie TLV table parsing");
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0012-nvmem-stm32-romem-mark-OF-related-data-as-maybe-unus.patch b/target/linux/generic/backport-5.10/814-v6.4-0012-nvmem-stm32-romem-mark-OF-related-data-as-maybe-unus.patch
deleted file mode 100644
index 94a0911d73cc..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0012-nvmem-stm32-romem-mark-OF-related-data-as-maybe-unus.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From a4fb434ef96ace5af758ca2c52c3a3f8f3abc87c Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Tue, 4 Apr 2023 18:21:34 +0100
-Subject: [PATCH] nvmem: stm32-romem: mark OF related data as maybe unused
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The driver can be compile tested with !CONFIG_OF making certain data
-unused:
-
-  drivers/nvmem/stm32-romem.c:271:34: error: ‘stm32_romem_of_match’ defined but not used [-Werror=unused-const-variable=]
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-27-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -268,7 +268,7 @@ static const struct stm32_romem_cfg stm3
- 	.ta = true,
- };
- 
--static const struct of_device_id stm32_romem_of_match[] = {
-+static const struct of_device_id stm32_romem_of_match[] __maybe_unused = {
- 	{ .compatible = "st,stm32f4-otp", }, {
- 		.compatible = "st,stm32mp15-bsec",
- 		.data = (void *)&stm32mp15_bsec_cfg,
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0013-nvmem-mtk-efuse-Support-postprocessing-for-GPU-speed.patch b/target/linux/generic/backport-5.10/814-v6.4-0013-nvmem-mtk-efuse-Support-postprocessing-for-GPU-speed.patch
deleted file mode 100644
index abda402bddb0..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0013-nvmem-mtk-efuse-Support-postprocessing-for-GPU-speed.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From de6e05097f7db066afb0ad4c88b730949f7b7749 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Tue, 4 Apr 2023 18:21:35 +0100
-Subject: [PATCH] nvmem: mtk-efuse: Support postprocessing for GPU speed
- binning data
-
-On some MediaTek SoCs GPU speed binning data is available for read
-in the SoC's eFuse array but it has a format that is incompatible
-with what the OPP API expects, as we read a number from 0 to 7 but
-opp-supported-hw is expecting a bitmask to enable an OPP entry:
-being what we read limited to 0-7, it's straightforward to simply
-convert the value to BIT(value) as a post-processing action.
-
-So, introduce post-processing support and enable it by evaluating
-the newly introduced platform data's `uses_post_processing` member,
-currently enabled only for MT8186.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-28-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/mtk-efuse.c | 53 +++++++++++++++++++++++++++++++++++++--
- 1 file changed, 51 insertions(+), 2 deletions(-)
-
---- a/drivers/nvmem/mtk-efuse.c
-+++ b/drivers/nvmem/mtk-efuse.c
-@@ -10,6 +10,11 @@
- #include <linux/io.h>
- #include <linux/nvmem-provider.h>
- #include <linux/platform_device.h>
-+#include <linux/property.h>
-+
-+struct mtk_efuse_pdata {
-+	bool uses_post_processing;
-+};
- 
- struct mtk_efuse_priv {
- 	void __iomem *base;
-@@ -29,6 +34,37 @@ static int mtk_reg_read(void *context,
- 	return 0;
- }
- 
-+static int mtk_efuse_gpu_speedbin_pp(void *context, const char *id, int index,
-+				     unsigned int offset, void *data, size_t bytes)
-+{
-+	u8 *val = data;
-+
-+	if (val[0] < 8)
-+		val[0] = BIT(val[0]);
-+
-+	return 0;
-+}
-+
-+static void mtk_efuse_fixup_cell_info(struct nvmem_device *nvmem,
-+				      struct nvmem_layout *layout,
-+				      struct nvmem_cell_info *cell)
-+{
-+	size_t sz = strlen(cell->name);
-+
-+	/*
-+	 * On some SoCs, the GPU speedbin is not read as bitmask but as
-+	 * a number with range [0-7] (max 3 bits): post process to use
-+	 * it in OPP tables to describe supported-hw.
-+	 */
-+	if (cell->nbits <= 3 &&
-+	    strncmp(cell->name, "gpu-speedbin", min(sz, strlen("gpu-speedbin"))) == 0)
-+		cell->read_post_process = mtk_efuse_gpu_speedbin_pp;
-+}
-+
-+static struct nvmem_layout mtk_efuse_layout = {
-+	.fixup_cell_info = mtk_efuse_fixup_cell_info,
-+};
-+
- static int mtk_efuse_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-@@ -36,6 +72,7 @@ static int mtk_efuse_probe(struct platfo
- 	struct nvmem_device *nvmem;
- 	struct nvmem_config econfig = {};
- 	struct mtk_efuse_priv *priv;
-+	const struct mtk_efuse_pdata *pdata;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
-@@ -45,20 +82,32 @@ static int mtk_efuse_probe(struct platfo
- 	if (IS_ERR(priv->base))
- 		return PTR_ERR(priv->base);
- 
-+	pdata = device_get_match_data(dev);
- 	econfig.stride = 1;
- 	econfig.word_size = 1;
- 	econfig.reg_read = mtk_reg_read;
- 	econfig.size = resource_size(res);
- 	econfig.priv = priv;
- 	econfig.dev = dev;
-+	if (pdata->uses_post_processing)
-+		econfig.layout = &mtk_efuse_layout;
- 	nvmem = devm_nvmem_register(dev, &econfig);
- 
- 	return PTR_ERR_OR_ZERO(nvmem);
- }
- 
-+static const struct mtk_efuse_pdata mtk_mt8186_efuse_pdata = {
-+	.uses_post_processing = true,
-+};
-+
-+static const struct mtk_efuse_pdata mtk_efuse_pdata = {
-+	.uses_post_processing = false,
-+};
-+
- static const struct of_device_id mtk_efuse_of_match[] = {
--	{ .compatible = "mediatek,mt8173-efuse",},
--	{ .compatible = "mediatek,efuse",},
-+	{ .compatible = "mediatek,mt8173-efuse", .data = &mtk_efuse_pdata },
-+	{ .compatible = "mediatek,mt8186-efuse", .data = &mtk_mt8186_efuse_pdata },
-+	{ .compatible = "mediatek,efuse", .data = &mtk_efuse_pdata },
- 	{/* sentinel */},
- };
- MODULE_DEVICE_TABLE(of, mtk_efuse_of_match);
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0014-nvmem-bcm-ocotp-Use-devm_platform_ioremap_resource.patch b/target/linux/generic/backport-5.10/814-v6.4-0014-nvmem-bcm-ocotp-Use-devm_platform_ioremap_resource.patch
deleted file mode 100644
index a0874f73d15c..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0014-nvmem-bcm-ocotp-Use-devm_platform_ioremap_resource.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 1dc552fa33cf98af3e784dbc0500da93cae3b24a Mon Sep 17 00:00:00 2001
-From: Yang Li <yang.lee@linux.alibaba.com>
-Date: Tue, 4 Apr 2023 18:21:38 +0100
-Subject: [PATCH] nvmem: bcm-ocotp: Use devm_platform_ioremap_resource()
-
-According to commit 7945f929f1a7 ("drivers: provide
-devm_platform_ioremap_resource()"), convert platform_get_resource(),
-devm_ioremap_resource() to a single call to use
-devm_platform_ioremap_resource(), as this is exactly what this function
-does.
-
-Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-31-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/bcm-ocotp.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/nvmem/bcm-ocotp.c
-+++ b/drivers/nvmem/bcm-ocotp.c
-@@ -254,7 +254,6 @@ MODULE_DEVICE_TABLE(acpi, bcm_otpc_acpi_
- static int bcm_otpc_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
--	struct resource *res;
- 	struct otpc_priv *priv;
- 	struct nvmem_device *nvmem;
- 	int err;
-@@ -269,8 +268,7 @@ static int bcm_otpc_probe(struct platfor
- 		return -ENODEV;
- 
- 	/* Get OTP base address register. */
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	priv->base = devm_ioremap_resource(dev, res);
-+	priv->base = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(priv->base)) {
- 		dev_err(dev, "unable to map I/O memory\n");
- 		return PTR_ERR(priv->base);
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0015-nvmem-nintendo-otp-Use-devm_platform_ioremap_resourc.patch b/target/linux/generic/backport-5.10/814-v6.4-0015-nvmem-nintendo-otp-Use-devm_platform_ioremap_resourc.patch
deleted file mode 100644
index 890dacd08dbe..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0015-nvmem-nintendo-otp-Use-devm_platform_ioremap_resourc.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 649409990d2e93fac657be7c6960c28a2c601d65 Mon Sep 17 00:00:00 2001
-From: Yang Li <yang.lee@linux.alibaba.com>
-Date: Tue, 4 Apr 2023 18:21:39 +0100
-Subject: [PATCH] nvmem: nintendo-otp: Use devm_platform_ioremap_resource()
-
-According to commit 7945f929f1a7 ("drivers: provide
-devm_platform_ioremap_resource()"), convert platform_get_resource(),
-devm_ioremap_resource() to a single call to use
-devm_platform_ioremap_resource(), as this is exactly what this function
-does.
-
-Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-32-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/nintendo-otp.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/nvmem/nintendo-otp.c
-+++ b/drivers/nvmem/nintendo-otp.c
-@@ -76,7 +76,6 @@ static int nintendo_otp_probe(struct pla
- 	struct device *dev = &pdev->dev;
- 	const struct of_device_id *of_id =
- 		of_match_device(nintendo_otp_of_table, dev);
--	struct resource *res;
- 	struct nvmem_device *nvmem;
- 	struct nintendo_otp_priv *priv;
- 
-@@ -92,8 +91,7 @@ static int nintendo_otp_probe(struct pla
- 	if (!priv)
- 		return -ENOMEM;
- 
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	priv->regs = devm_ioremap_resource(dev, res);
-+	priv->regs = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(priv->regs))
- 		return PTR_ERR(priv->regs);
- 
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0016-nvmem-vf610-ocotp-Use-devm_platform_get_and_ioremap_.patch b/target/linux/generic/backport-5.10/814-v6.4-0016-nvmem-vf610-ocotp-Use-devm_platform_get_and_ioremap_.patch
deleted file mode 100644
index 3f5d3c1ad4c1..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0016-nvmem-vf610-ocotp-Use-devm_platform_get_and_ioremap_.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From c2367aa60d5e34d48582362c6de34b4131d92be7 Mon Sep 17 00:00:00 2001
-From: Yang Li <yang.lee@linux.alibaba.com>
-Date: Tue, 4 Apr 2023 18:21:40 +0100
-Subject: [PATCH] nvmem: vf610-ocotp: Use
- devm_platform_get_and_ioremap_resource()
-
-According to commit 890cc39a8799 ("drivers: provide
-devm_platform_get_and_ioremap_resource()"), convert
-platform_get_resource(), devm_ioremap_resource() to a single
-call to devm_platform_get_and_ioremap_resource(), as this is exactly
-what this function does.
-
-Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-33-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/vf610-ocotp.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/nvmem/vf610-ocotp.c
-+++ b/drivers/nvmem/vf610-ocotp.c
-@@ -219,8 +219,7 @@ static int vf610_ocotp_probe(struct plat
- 	if (!ocotp_dev)
- 		return -ENOMEM;
- 
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	ocotp_dev->base = devm_ioremap_resource(dev, res);
-+	ocotp_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
- 	if (IS_ERR(ocotp_dev->base))
- 		return PTR_ERR(ocotp_dev->base);
- 
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0017-nvmem-core-support-specifying-both-cell-raw-data-pos.patch b/target/linux/generic/backport-5.10/814-v6.4-0017-nvmem-core-support-specifying-both-cell-raw-data-pos.patch
deleted file mode 100644
index eeb407e9bb66..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0017-nvmem-core-support-specifying-both-cell-raw-data-pos.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 55d4980ce55b6bb4be66877de4dbec513911b988 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 4 Apr 2023 18:21:42 +0100
-Subject: [PATCH] nvmem: core: support specifying both: cell raw data & post
- read lengths
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Callback .read_post_process() is designed to modify raw cell content
-before providing it to the consumer. So far we were dealing with
-modifications that didn't affect cell size (length). In some cases
-however cell content needs to be reformatted and resized.
-
-It's required e.g. to provide properly formatted MAC address in case
-it's stored in a non-binary format (e.g. using ASCII).
-
-There were few discussions how to optimally handle that. Following
-possible solutions were considered:
-1. Allow .read_post_process() to realloc (resize) content buffer
-2. Allow .read_post_process() to adjust (decrease) just buffer length
-3. Register NVMEM cells using post-read sizes
-
-The preferred solution was the last one. The problem is that simply
-adjusting "bytes" in NVMEM providers would result in core code NOT
-passing whole raw data to .read_post_process() callbacks. It means
-callback functions couldn't do their job without somehow manually
-reading original cell content on their own.
-
-This patch deals with that by registering NVMEM cells with both lengths:
-raw content one and post read one. It allows:
-1. Core code to read whole raw cell content
-2. Callbacks to return content they want
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-35-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 11 +++++++----
- include/linux/nvmem-provider.h |  2 ++
- 2 files changed, 9 insertions(+), 4 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -50,6 +50,7 @@ struct nvmem_device {
- struct nvmem_cell_entry {
- 	const char		*name;
- 	int			offset;
-+	size_t			raw_len;
- 	int			bytes;
- 	int			bit_offset;
- 	int			nbits;
-@@ -469,6 +470,7 @@ static int nvmem_cell_info_to_nvmem_cell
- {
- 	cell->nvmem = nvmem;
- 	cell->offset = info->offset;
-+	cell->raw_len = info->raw_len ?: info->bytes;
- 	cell->bytes = info->bytes;
- 	cell->name = info->name;
- 	cell->read_post_process = info->read_post_process;
-@@ -1560,7 +1562,7 @@ static int __nvmem_cell_read(struct nvme
- {
- 	int rc;
- 
--	rc = nvmem_reg_read(nvmem, cell->offset, buf, cell->bytes);
-+	rc = nvmem_reg_read(nvmem, cell->offset, buf, cell->raw_len);
- 
- 	if (rc)
- 		return rc;
-@@ -1571,7 +1573,7 @@ static int __nvmem_cell_read(struct nvme
- 
- 	if (cell->read_post_process) {
- 		rc = cell->read_post_process(cell->priv, id, index,
--					     cell->offset, buf, cell->bytes);
-+					     cell->offset, buf, cell->raw_len);
- 		if (rc)
- 			return rc;
- 	}
-@@ -1594,14 +1596,15 @@ static int __nvmem_cell_read(struct nvme
-  */
- void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len)
- {
--	struct nvmem_device *nvmem = cell->entry->nvmem;
-+	struct nvmem_cell_entry *entry = cell->entry;
-+	struct nvmem_device *nvmem = entry->nvmem;
- 	u8 *buf;
- 	int rc;
- 
- 	if (!nvmem)
- 		return ERR_PTR(-EINVAL);
- 
--	buf = kzalloc(cell->entry->bytes, GFP_KERNEL);
-+	buf = kzalloc(max_t(size_t, entry->raw_len, entry->bytes), GFP_KERNEL);
- 	if (!buf)
- 		return ERR_PTR(-ENOMEM);
- 
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -51,6 +51,7 @@ struct nvmem_keepout {
-  * struct nvmem_cell_info - NVMEM cell description
-  * @name:	Name.
-  * @offset:	Offset within the NVMEM device.
-+ * @raw_len:	Length of raw data (without post processing).
-  * @bytes:	Length of the cell.
-  * @bit_offset:	Bit offset if cell is smaller than a byte.
-  * @nbits:	Number of bits.
-@@ -62,6 +63,7 @@ struct nvmem_keepout {
- struct nvmem_cell_info {
- 	const char		*name;
- 	unsigned int		offset;
-+	size_t			raw_len;
- 	unsigned int		bytes;
- 	unsigned int		bit_offset;
- 	unsigned int		nbits;
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0018-nvmem-u-boot-env-post-process-ethaddr-env-variable.patch b/target/linux/generic/backport-5.10/814-v6.4-0018-nvmem-u-boot-env-post-process-ethaddr-env-variable.patch
deleted file mode 100644
index adde0ffc4b17..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0018-nvmem-u-boot-env-post-process-ethaddr-env-variable.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From c49f1a8af6bcf6d18576bca898f8083ca4b129e1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 4 Apr 2023 18:21:43 +0100
-Subject: [PATCH] nvmem: u-boot-env: post-process "ethaddr" env variable
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-U-Boot environment variables are stored in ASCII format so "ethaddr"
-requires parsing into binary to make it work with Ethernet interfaces.
-
-This includes support for indexes to support #nvmem-cell-cells = <1>.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-36-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig      |  1 +
- drivers/nvmem/u-boot-env.c | 26 ++++++++++++++++++++++++++
- 2 files changed, 27 insertions(+)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -340,6 +340,7 @@ config NVMEM_U_BOOT_ENV
- 	tristate "U-Boot environment variables support"
- 	depends on OF && MTD
- 	select CRC32
-+	select GENERIC_NET_UTILS
- 	help
- 	  U-Boot stores its setup as environment variables. This driver adds
- 	  support for verifying & exporting such data. It also exposes variables
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -4,6 +4,8 @@
-  */
- 
- #include <linux/crc32.h>
-+#include <linux/etherdevice.h>
-+#include <linux/if_ether.h>
- #include <linux/mod_devicetable.h>
- #include <linux/module.h>
- #include <linux/mtd/mtd.h>
-@@ -70,6 +72,25 @@ static int u_boot_env_read(void *context
- 	return 0;
- }
- 
-+static int u_boot_env_read_post_process_ethaddr(void *context, const char *id, int index,
-+						unsigned int offset, void *buf, size_t bytes)
-+{
-+	u8 mac[ETH_ALEN];
-+
-+	if (bytes != 3 * ETH_ALEN - 1)
-+		return -EINVAL;
-+
-+	if (!mac_pton(buf, mac))
-+		return -EINVAL;
-+
-+	if (index)
-+		eth_addr_add(mac, index);
-+
-+	ether_addr_copy(buf, mac);
-+
-+	return 0;
-+}
-+
- static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
- 				size_t data_offset, size_t data_len)
- {
-@@ -101,6 +122,11 @@ static int u_boot_env_add_cells(struct u
- 		priv->cells[idx].offset = data_offset + value - data;
- 		priv->cells[idx].bytes = strlen(value);
- 		priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
-+		if (!strcmp(var, "ethaddr")) {
-+			priv->cells[idx].raw_len = strlen(value);
-+			priv->cells[idx].bytes = ETH_ALEN;
-+			priv->cells[idx].read_post_process = u_boot_env_read_post_process_ethaddr;
-+		}
- 	}
- 
- 	if (WARN_ON(idx != priv->ncells))
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0019-nvmem-Add-macro-to-register-nvmem-layout-drivers.patch b/target/linux/generic/backport-5.10/814-v6.4-0019-nvmem-Add-macro-to-register-nvmem-layout-drivers.patch
deleted file mode 100644
index 7c6fe22b5f3a..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0019-nvmem-Add-macro-to-register-nvmem-layout-drivers.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 814c978f02db17f16e6aa2efa2a929372f06da09 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:44 +0100
-Subject: [PATCH] nvmem: Add macro to register nvmem layout drivers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Provide a module_nvmem_layout_driver() macro at the end of the
-nvmem-provider.h header to reduce the boilerplate when registering nvmem
-layout drivers.
-
-Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-37-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- include/linux/nvmem-provider.h | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -9,6 +9,7 @@
- #ifndef _LINUX_NVMEM_PROVIDER_H
- #define _LINUX_NVMEM_PROVIDER_H
- 
-+#include <linux/device/driver.h>
- #include <linux/err.h>
- #include <linux/errno.h>
- #include <linux/gpio/consumer.h>
-@@ -242,4 +243,9 @@ nvmem_layout_get_match_data(struct nvmem
- }
- 
- #endif /* CONFIG_NVMEM */
-+
-+#define module_nvmem_layout_driver(__layout_driver)		\
-+	module_driver(__layout_driver, nvmem_layout_register,	\
-+		      nvmem_layout_unregister)
-+
- #endif  /* ifndef _LINUX_NVMEM_PROVIDER_H */
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0020-nvmem-layouts-sl28vpd-Use-module_nvmem_layout_driver.patch b/target/linux/generic/backport-5.10/814-v6.4-0020-nvmem-layouts-sl28vpd-Use-module_nvmem_layout_driver.patch
deleted file mode 100644
index 06646dd68bf6..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0020-nvmem-layouts-sl28vpd-Use-module_nvmem_layout_driver.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 0abdf99fe0c86252ba274703425f8d543d7e7f0d Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:45 +0100
-Subject: [PATCH] nvmem: layouts: sl28vpd: Use module_nvmem_layout_driver()
-
-Stop open-coding the module init/exit functions. Use the
-module_nvmem_layout_driver() instead.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-38-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/sl28vpd.c | 14 +-------------
- 1 file changed, 1 insertion(+), 13 deletions(-)
-
---- a/drivers/nvmem/layouts/sl28vpd.c
-+++ b/drivers/nvmem/layouts/sl28vpd.c
-@@ -146,19 +146,7 @@ struct nvmem_layout sl28vpd_layout = {
- 	.of_match_table = sl28vpd_of_match_table,
- 	.add_cells = sl28vpd_add_cells,
- };
--
--static int __init sl28vpd_init(void)
--{
--	return nvmem_layout_register(&sl28vpd_layout);
--}
--
--static void __exit sl28vpd_exit(void)
--{
--	nvmem_layout_unregister(&sl28vpd_layout);
--}
--
--module_init(sl28vpd_init);
--module_exit(sl28vpd_exit);
-+module_nvmem_layout_driver(sl28vpd_layout);
- 
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0021-nvmem-layouts-onie-tlv-Use-module_nvmem_layout_drive.patch b/target/linux/generic/backport-5.10/814-v6.4-0021-nvmem-layouts-onie-tlv-Use-module_nvmem_layout_drive.patch
deleted file mode 100644
index 826f4378c2fa..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0021-nvmem-layouts-onie-tlv-Use-module_nvmem_layout_drive.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From d119eb38faab61125aaa4f63c74eef61585cf34c Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:46 +0100
-Subject: [PATCH] nvmem: layouts: onie-tlv: Use module_nvmem_layout_driver()
-
-Stop open-coding the module init/exit functions. Use the
-module_nvmem_layout_driver() instead.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-39-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/onie-tlv.c | 14 +-------------
- 1 file changed, 1 insertion(+), 13 deletions(-)
-
---- a/drivers/nvmem/layouts/onie-tlv.c
-+++ b/drivers/nvmem/layouts/onie-tlv.c
-@@ -237,19 +237,7 @@ static struct nvmem_layout onie_tlv_layo
- 	.of_match_table = onie_tlv_of_match_table,
- 	.add_cells = onie_tlv_parse_table,
- };
--
--static int __init onie_tlv_init(void)
--{
--	return nvmem_layout_register(&onie_tlv_layout);
--}
--
--static void __exit onie_tlv_exit(void)
--{
--	nvmem_layout_unregister(&onie_tlv_layout);
--}
--
--module_init(onie_tlv_init);
--module_exit(onie_tlv_exit);
-+module_nvmem_layout_driver(onie_tlv_layout);
- 
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0022-nvmem-layouts-onie-tlv-Drop-wrong-module-alias.patch b/target/linux/generic/backport-5.10/814-v6.4-0022-nvmem-layouts-onie-tlv-Drop-wrong-module-alias.patch
deleted file mode 100644
index f20db85ceb6f..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0022-nvmem-layouts-onie-tlv-Drop-wrong-module-alias.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 6b13e4b6a9a45028ac730e550380077df1845912 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:47 +0100
-Subject: [PATCH] nvmem: layouts: onie-tlv: Drop wrong module alias
-
-The MODULE_ALIAS macro is misused here as it carries the
-description. There is currently no relevant alias to provide so let's
-just drop it.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-40-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/onie-tlv.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/nvmem/layouts/onie-tlv.c
-+++ b/drivers/nvmem/layouts/onie-tlv.c
-@@ -242,4 +242,3 @@ module_nvmem_layout_driver(onie_tlv_layo
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
- MODULE_DESCRIPTION("NVMEM layout driver for Onie TLV table parsing");
--MODULE_ALIAS("NVMEM layout driver for Onie TLV table parsing");
diff --git a/target/linux/generic/backport-5.10/814-v6.4-0023-nvmem-layouts-sl28vpd-set-varaiable-sl28vpd_layout-s.patch b/target/linux/generic/backport-5.10/814-v6.4-0023-nvmem-layouts-sl28vpd-set-varaiable-sl28vpd_layout-s.patch
deleted file mode 100644
index 5cf847b57ae1..000000000000
--- a/target/linux/generic/backport-5.10/814-v6.4-0023-nvmem-layouts-sl28vpd-set-varaiable-sl28vpd_layout-s.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From a8642cd11635a35a5f1dc31857887900d6610778 Mon Sep 17 00:00:00 2001
-From: Tom Rix <trix@redhat.com>
-Date: Tue, 4 Apr 2023 18:21:48 +0100
-Subject: [PATCH] nvmem: layouts: sl28vpd: set varaiable sl28vpd_layout
- storage-class-specifier to static
-
-smatch reports
-drivers/nvmem/layouts/sl28vpd.c:144:21: warning: symbol
-  'sl28vpd_layout' was not declared. Should it be static?
-
-This variable is only used in one file so it should be static.
-
-Signed-off-by: Tom Rix <trix@redhat.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-41-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/sl28vpd.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/layouts/sl28vpd.c
-+++ b/drivers/nvmem/layouts/sl28vpd.c
-@@ -141,7 +141,7 @@ static const struct of_device_id sl28vpd
- };
- MODULE_DEVICE_TABLE(of, sl28vpd_of_match_table);
- 
--struct nvmem_layout sl28vpd_layout = {
-+static struct nvmem_layout sl28vpd_layout = {
- 	.name = "sl28-vpd",
- 	.of_match_table = sl28vpd_of_match_table,
- 	.add_cells = sl28vpd_add_cells,
diff --git a/target/linux/generic/backport-5.10/818-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch b/target/linux/generic/backport-5.10/818-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch
deleted file mode 100644
index 6b75b0871707..000000000000
--- a/target/linux/generic/backport-5.10/818-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From 2d5ba37461013253d2ff0a3641b727fd32ea97a9 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Tue, 23 Feb 2021 18:44:53 +0100
-Subject: [PATCH 1/3] usb: ehci: add spurious flag to disable overcurrent
- checking
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds an ignore_oc flag which can be set by EHCI controller
-not supporting or wanting to disable overcurrent checking. The EHCI
-platform data in include/linux/usb/ehci_pdriver.h is also augmented to
-take advantage of this new flag.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Link: https://lore.kernel.org/r/20210223174455.1378-2-noltari@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/ehci-hcd.c      | 2 +-
- drivers/usb/host/ehci-hub.c      | 4 ++--
- drivers/usb/host/ehci-platform.c | 2 ++
- drivers/usb/host/ehci.h          | 1 +
- include/linux/usb/ehci_pdriver.h | 1 +
- 5 files changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -660,7 +660,7 @@ static int ehci_run (struct usb_hcd *hcd
- 		"USB %x.%x started, EHCI %x.%02x%s\n",
- 		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
- 		temp >> 8, temp & 0xff,
--		ignore_oc ? ", overcurrent ignored" : "");
-+		(ignore_oc || ehci->spurious_oc) ? ", overcurrent ignored" : "");
- 
- 	ehci_writel(ehci, INTR_MASK,
- 		    &ehci->regs->intr_enable); /* Turn On Interrupts */
---- a/drivers/usb/host/ehci-hub.c
-+++ b/drivers/usb/host/ehci-hub.c
-@@ -643,7 +643,7 @@ ehci_hub_status_data (struct usb_hcd *hc
- 	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
- 	 * PORT_POWER; that's surprising, but maybe within-spec.
- 	 */
--	if (!ignore_oc)
-+	if (!ignore_oc && !ehci->spurious_oc)
- 		mask = PORT_CSC | PORT_PEC | PORT_OCC;
- 	else
- 		mask = PORT_CSC | PORT_PEC;
-@@ -1013,7 +1013,7 @@ int ehci_hub_control(
- 		if (temp & PORT_PEC)
- 			status |= USB_PORT_STAT_C_ENABLE << 16;
- 
--		if ((temp & PORT_OCC) && !ignore_oc){
-+		if ((temp & PORT_OCC) && (!ignore_oc && !ehci->spurious_oc)){
- 			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
- 
- 			/*
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -333,6 +333,8 @@ static int ehci_platform_probe(struct pl
- 		hcd->has_tt = 1;
- 	if (pdata->reset_on_resume)
- 		priv->reset_on_resume = true;
-+	if (pdata->spurious_oc)
-+		ehci->spurious_oc = 1;
- 
- #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
- 	if (ehci->big_endian_mmio) {
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -219,6 +219,7 @@ struct ehci_hcd {			/* one per controlle
- 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
- 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
- 	unsigned		is_aspeed:1;
-+	unsigned		spurious_oc:1;
- 
- 	/* required for usb32 quirk */
- 	#define OHCI_CTRL_HCFS          (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -50,6 +50,7 @@ struct usb_ehci_pdata {
- 	unsigned	no_io_watchdog:1;
- 	unsigned	reset_on_resume:1;
- 	unsigned	dma_mask_64:1;
-+	unsigned	spurious_oc:1;
- 
- 	/* Turn on all power and clocks */
- 	int (*power_on)(struct platform_device *pdev);
diff --git a/target/linux/generic/backport-5.10/819-v5.13-usb-host-ehci-platform-add-spurious_oc-DT-support.patch b/target/linux/generic/backport-5.10/819-v5.13-usb-host-ehci-platform-add-spurious_oc-DT-support.patch
deleted file mode 100644
index 0094d47718e5..000000000000
--- a/target/linux/generic/backport-5.10/819-v5.13-usb-host-ehci-platform-add-spurious_oc-DT-support.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 4da57dbbffdfa7fe4e2b70b047fc5ff95ff25a3d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Tue, 23 Feb 2021 18:44:55 +0100
-Subject: [PATCH 3/3] usb: host: ehci-platform: add spurious_oc DT support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Over-current reporting isn't supported on some platforms such as bcm63xx.
-These devices will incorrectly report over-current if this flag isn't properly
-activated.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Link: https://lore.kernel.org/r/20210223174455.1378-4-noltari@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/ehci-platform.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -286,6 +286,9 @@ static int ehci_platform_probe(struct pl
- 		if (of_property_read_bool(dev->dev.of_node, "big-endian"))
- 			ehci->big_endian_mmio = ehci->big_endian_desc = 1;
- 
-+		if (of_property_read_bool(dev->dev.of_node, "spurious-oc"))
-+			ehci->spurious_oc = 1;
-+
- 		if (of_property_read_bool(dev->dev.of_node,
- 					  "needs-reset-on-resume"))
- 			priv->reset_on_resume = true;
diff --git a/target/linux/generic/backport-5.10/820-v5.13-make-pci_host_common_probe-declare-its-reliance-on-msi-domains.patch b/target/linux/generic/backport-5.10/820-v5.13-make-pci_host_common_probe-declare-its-reliance-on-msi-domains.patch
deleted file mode 100644
index 8ca2b78f74b7..000000000000
--- a/target/linux/generic/backport-5.10/820-v5.13-make-pci_host_common_probe-declare-its-reliance-on-msi-domains.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 9ec37efb87832b578d7972fc80b04d94f5d2bbe3 Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <maz@kernel.org>
-Date: Tue, 30 Mar 2021 16:11:42 +0100
-Subject: PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI
- domains
-
-The generic PCI host driver relies on MSI domains for MSIs to
-be provided to its end-points. Make this dependency explicit.
-
-This cures the warnings occuring on arm/arm64 VMs when booted
-with PCI virtio devices and no MSI controller (no GICv3 ITS,
-for example).
-
-It is likely that other drivers will need to express the same
-dependency.
-
-Link: https://lore.kernel.org/r/20210330151145.997953-12-maz@kernel.org
-Signed-off-by: Marc Zyngier <maz@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Acked-by: Bjorn Helgaas <bhelgaas@google.com>
----
- drivers/pci/controller/pci-host-common.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/pci/controller/pci-host-common.c
-+++ b/drivers/pci/controller/pci-host-common.c
-@@ -77,6 +77,7 @@ int pci_host_common_probe(struct platfor
- 
- 	bridge->sysdata = cfg;
- 	bridge->ops = (struct pci_ops *)&ops->pci_ops;
-+	bridge->msi_domain = true;
- 
- 	platform_set_drvdata(pdev, bridge);
- 
diff --git a/target/linux/generic/backport-5.10/821-v5.13-let-pci-host-bridges-declar-their-reliance-on-msi-domains.patch b/target/linux/generic/backport-5.10/821-v5.13-let-pci-host-bridges-declar-their-reliance-on-msi-domains.patch
deleted file mode 100644
index ee1acf4b9cce..000000000000
--- a/target/linux/generic/backport-5.10/821-v5.13-let-pci-host-bridges-declar-their-reliance-on-msi-domains.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 94e89b145371b68fa0ea294855adebcd03e0522e Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <maz@kernel.org>
-Date: Tue, 30 Mar 2021 16:11:41 +0100
-Subject: PCI/MSI: Let PCI host bridges declare their reliance on MSI domains
-
-There is a whole class of host bridges that cannot know whether
-MSIs will be provided or not, as they rely on other blocks
-to provide the MSI functionnality, using MSI domains.  This is
-the case for example on systems that use the ARM GIC architecture.
-
-Introduce a new attribute ('msi_domain') indicating that implicit
-dependency, and use this property to set the NO_MSI flag when
-no MSI domain is found at probe time.
-
-Link: https://lore.kernel.org/r/20210330151145.997953-11-maz@kernel.org
-Signed-off-by: Marc Zyngier <maz@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Acked-by: Bjorn Helgaas <bhelgaas@google.com>
----
- drivers/pci/probe.c | 2 ++
- include/linux/pci.h | 1 +
- 2 files changed, 3 insertions(+)
-
---- a/drivers/pci/probe.c
-+++ b/drivers/pci/probe.c
-@@ -925,6 +925,8 @@ static int pci_register_host_bridge(stru
- 	device_enable_async_suspend(bus->bridge);
- 	pci_set_bus_of_node(bus);
- 	pci_set_bus_msi_domain(bus);
-+	if (bridge->msi_domain && !dev_get_msi_domain(&bus->dev))
-+		bus->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
- 
- 	if (!parent)
- 		set_dev_node(bus->bridge, pcibus_to_node(bus));
---- a/include/linux/pci.h
-+++ b/include/linux/pci.h
-@@ -548,6 +548,7 @@ struct pci_host_bridge {
- 	unsigned int	native_dpc:1;		/* OS may use PCIe DPC */
- 	unsigned int	preserve_config:1;	/* Preserve FW resource setup */
- 	unsigned int	size_windows:1;		/* Enable root bus sizing */
-+	unsigned int	msi_domain:1;		/* Bridge wants MSI domain */
- 
- 	/* Resource alignment requirements */
- 	resource_size_t (*align_resource)(struct pci_dev *dev,
diff --git a/target/linux/generic/backport-5.10/822-v5.13-advertise-lack-of-built-in-msi-handling.patch b/target/linux/generic/backport-5.10/822-v5.13-advertise-lack-of-built-in-msi-handling.patch
deleted file mode 100644
index c11aedd8142a..000000000000
--- a/target/linux/generic/backport-5.10/822-v5.13-advertise-lack-of-built-in-msi-handling.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 645e9c38383d7fcde2784ee537fa18ec9bed54d9 Mon Sep 17 00:00:00 2001
-From: Thomas Gleixner <tglx@linutronix.de>
-Date: Tue, 30 Mar 2021 16:11:43 +0100
-Subject: PCI: mediatek: Advertise lack of built-in MSI handling
-
-Some Mediatek host bridges cannot handle MSIs, which is sad.
-This also results in an ugly warning at device probe time,
-as the core PCI code wasn't told that MSIs were not available.
-
-Advertise this fact to the rest of the core PCI code by
-using the 'msi_domain' attribute, which still opens the possibility
-for another block to provide the MSI functionnality.
-
-[maz: commit message, switched over to msi_domain attribute]
-
-Link: https://lore.kernel.org/r/20210330151145.997953-13-maz@kernel.org
-Reported-by: Frank Wunderlich <frank-w@public-files.de>
-Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-Signed-off-by: Marc Zyngier <maz@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Acked-by: Bjorn Helgaas <bhelgaas@google.com>
----
- drivers/pci/controller/pcie-mediatek.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/pci/controller/pcie-mediatek.c
-+++ b/drivers/pci/controller/pcie-mediatek.c
-@@ -143,6 +143,7 @@ struct mtk_pcie_port;
-  * struct mtk_pcie_soc - differentiate between host generations
-  * @need_fix_class_id: whether this host's class ID needed to be fixed or not
-  * @need_fix_device_id: whether this host's device ID needed to be fixed or not
-+ * @no_msi: Bridge has no MSI support, and relies on an external block
-  * @device_id: device ID which this host need to be fixed
-  * @ops: pointer to configuration access functions
-  * @startup: pointer to controller setting functions
-@@ -151,6 +152,7 @@ struct mtk_pcie_port;
- struct mtk_pcie_soc {
- 	bool need_fix_class_id;
- 	bool need_fix_device_id;
-+	bool no_msi;
- 	unsigned int device_id;
- 	struct pci_ops *ops;
- 	int (*startup)(struct mtk_pcie_port *port);
-@@ -1087,6 +1089,7 @@ static int mtk_pcie_probe(struct platfor
- 
- 	host->ops = pcie->soc->ops;
- 	host->sysdata = pcie;
-+	host->msi_domain = pcie->soc->no_msi;
- 
- 	err = pci_host_probe(host);
- 	if (err)
-@@ -1176,6 +1179,7 @@ static const struct dev_pm_ops mtk_pcie_
- };
- 
- static const struct mtk_pcie_soc mtk_pcie_soc_v1 = {
-+	.no_msi = true,
- 	.ops = &mtk_pcie_ops,
- 	.startup = mtk_pcie_startup_port,
- };
diff --git a/target/linux/generic/backport-5.10/825-v5.15-of-unify-of_count_phandle_with_args-arguments-with-C.patch b/target/linux/generic/backport-5.10/825-v5.15-of-unify-of_count_phandle_with_args-arguments-with-C.patch
deleted file mode 100644
index ee5b7a0f7e8a..000000000000
--- a/target/linux/generic/backport-5.10/825-v5.15-of-unify-of_count_phandle_with_args-arguments-with-C.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From a065d5615fc83908ef21ed8159ffb63d816ff5de Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
-Date: Wed, 28 Jul 2021 16:42:27 +0200
-Subject: [PATCH] of: unify of_count_phandle_with_args() arguments with
- !CONFIG_OF
-
-Unify the declaration of of_count_phandle_with_args() between enabled
-and disabled OF by making constifying pointed device_node.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
----
- include/linux/of.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/linux/of.h
-+++ b/include/linux/of.h
-@@ -889,7 +889,7 @@ static inline int of_parse_phandle_with_
- 	return -ENOSYS;
- }
- 
--static inline int of_count_phandle_with_args(struct device_node *np,
-+static inline int of_count_phandle_with_args(const struct device_node *np,
- 					     const char *list_name,
- 					     const char *cells_name)
- {
diff --git a/target/linux/generic/backport-5.10/826-v5.17-of-base-make-small-of_parse_phandle-variants-static-.patch b/target/linux/generic/backport-5.10/826-v5.17-of-base-make-small-of_parse_phandle-variants-static-.patch
deleted file mode 100644
index b6ef67dfa796..000000000000
--- a/target/linux/generic/backport-5.10/826-v5.17-of-base-make-small-of_parse_phandle-variants-static-.patch
+++ /dev/null
@@ -1,359 +0,0 @@
-From 66a8f7f04979f4ad739085f01d99c8caf620b4f5 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 18 Jan 2022 18:35:02 +0100
-Subject: [PATCH] of: base: make small of_parse_phandle() variants static
- inline
-
-Make all the smaller variants of the of_parse_phandle() static inline.
-This also let us remove the empty function stubs if CONFIG_OF is not
-defined.
-
-Suggested-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Michael Walle <michael@walle.cc>
-[robh: move index < 0 check into __of_parse_phandle_with_args]
-Signed-off-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20220118173504.2867523-2-michael@walle.cc
----
- drivers/of/base.c  | 131 +++------------------------------------
- include/linux/of.h | 148 ++++++++++++++++++++++++++++++++++++---------
- 2 files changed, 129 insertions(+), 150 deletions(-)
-
---- a/drivers/of/base.c
-+++ b/drivers/of/base.c
-@@ -1372,15 +1372,18 @@ int of_phandle_iterator_args(struct of_p
- 	return count;
- }
- 
--static int __of_parse_phandle_with_args(const struct device_node *np,
--					const char *list_name,
--					const char *cells_name,
--					int cell_count, int index,
--					struct of_phandle_args *out_args)
-+int __of_parse_phandle_with_args(const struct device_node *np,
-+				 const char *list_name,
-+				 const char *cells_name,
-+				 int cell_count, int index,
-+				 struct of_phandle_args *out_args)
- {
- 	struct of_phandle_iterator it;
- 	int rc, cur_index = 0;
- 
-+	if (index < 0)
-+		return -EINVAL;
-+
- 	/* Loop over the phandles until all the requested entry is found */
- 	of_for_each_phandle(&it, rc, np, list_name, cells_name, cell_count) {
- 		/*
-@@ -1423,82 +1426,7 @@ static int __of_parse_phandle_with_args(
- 	of_node_put(it.node);
- 	return rc;
- }
--
--/**
-- * of_parse_phandle - Resolve a phandle property to a device_node pointer
-- * @np: Pointer to device node holding phandle property
-- * @phandle_name: Name of property holding a phandle value
-- * @index: For properties holding a table of phandles, this is the index into
-- *         the table
-- *
-- * Return: The device_node pointer with refcount incremented.  Use
-- * of_node_put() on it when done.
-- */
--struct device_node *of_parse_phandle(const struct device_node *np,
--				     const char *phandle_name, int index)
--{
--	struct of_phandle_args args;
--
--	if (index < 0)
--		return NULL;
--
--	if (__of_parse_phandle_with_args(np, phandle_name, NULL, 0,
--					 index, &args))
--		return NULL;
--
--	return args.np;
--}
--EXPORT_SYMBOL(of_parse_phandle);
--
--/**
-- * of_parse_phandle_with_args() - Find a node pointed by phandle in a list
-- * @np:		pointer to a device tree node containing a list
-- * @list_name:	property name that contains a list
-- * @cells_name:	property name that specifies phandles' arguments count
-- * @index:	index of a phandle to parse out
-- * @out_args:	optional pointer to output arguments structure (will be filled)
-- *
-- * This function is useful to parse lists of phandles and their arguments.
-- * Returns 0 on success and fills out_args, on error returns appropriate
-- * errno value.
-- *
-- * Caller is responsible to call of_node_put() on the returned out_args->np
-- * pointer.
-- *
-- * Example::
-- *
-- *  phandle1: node1 {
-- *	#list-cells = <2>;
-- *  };
-- *
-- *  phandle2: node2 {
-- *	#list-cells = <1>;
-- *  };
-- *
-- *  node3 {
-- *	list = <&phandle1 1 2 &phandle2 3>;
-- *  };
-- *
-- * To get a device_node of the ``node2`` node you may call this:
-- * of_parse_phandle_with_args(node3, "list", "#list-cells", 1, &args);
-- */
--int of_parse_phandle_with_args(const struct device_node *np, const char *list_name,
--				const char *cells_name, int index,
--				struct of_phandle_args *out_args)
--{
--	int cell_count = -1;
--
--	if (index < 0)
--		return -EINVAL;
--
--	/* If cells_name is NULL we assume a cell count of 0 */
--	if (!cells_name)
--		cell_count = 0;
--
--	return __of_parse_phandle_with_args(np, list_name, cells_name,
--					    cell_count, index, out_args);
--}
--EXPORT_SYMBOL(of_parse_phandle_with_args);
-+EXPORT_SYMBOL(__of_parse_phandle_with_args);
- 
- /**
-  * of_parse_phandle_with_args_map() - Find a node pointed by phandle in a list and remap it
-@@ -1685,47 +1613,6 @@ free:
- EXPORT_SYMBOL(of_parse_phandle_with_args_map);
- 
- /**
-- * of_parse_phandle_with_fixed_args() - Find a node pointed by phandle in a list
-- * @np:		pointer to a device tree node containing a list
-- * @list_name:	property name that contains a list
-- * @cell_count: number of argument cells following the phandle
-- * @index:	index of a phandle to parse out
-- * @out_args:	optional pointer to output arguments structure (will be filled)
-- *
-- * This function is useful to parse lists of phandles and their arguments.
-- * Returns 0 on success and fills out_args, on error returns appropriate
-- * errno value.
-- *
-- * Caller is responsible to call of_node_put() on the returned out_args->np
-- * pointer.
-- *
-- * Example::
-- *
-- *  phandle1: node1 {
-- *  };
-- *
-- *  phandle2: node2 {
-- *  };
-- *
-- *  node3 {
-- *  	list = <&phandle1 0 2 &phandle2 2 3>;
-- *  };
-- *
-- * To get a device_node of the ``node2`` node you may call this:
-- * of_parse_phandle_with_fixed_args(node3, "list", 2, 1, &args);
-- */
--int of_parse_phandle_with_fixed_args(const struct device_node *np,
--				const char *list_name, int cell_count,
--				int index, struct of_phandle_args *out_args)
--{
--	if (index < 0)
--		return -EINVAL;
--	return __of_parse_phandle_with_args(np, list_name, NULL, cell_count,
--					   index, out_args);
--}
--EXPORT_SYMBOL(of_parse_phandle_with_fixed_args);
--
--/**
-  * of_count_phandle_with_args() - Find the number of phandles references in a property
-  * @np:		pointer to a device tree node containing a list
-  * @list_name:	property name that contains a list
---- a/include/linux/of.h
-+++ b/include/linux/of.h
-@@ -363,18 +363,12 @@ extern const struct of_device_id *of_mat
- 	const struct of_device_id *matches, const struct device_node *node);
- extern int of_modalias_node(struct device_node *node, char *modalias, int len);
- extern void of_print_phandle_args(const char *msg, const struct of_phandle_args *args);
--extern struct device_node *of_parse_phandle(const struct device_node *np,
--					    const char *phandle_name,
--					    int index);
--extern int of_parse_phandle_with_args(const struct device_node *np,
--	const char *list_name, const char *cells_name, int index,
--	struct of_phandle_args *out_args);
-+extern int __of_parse_phandle_with_args(const struct device_node *np,
-+	const char *list_name, const char *cells_name, int cell_count,
-+	int index, struct of_phandle_args *out_args);
- extern int of_parse_phandle_with_args_map(const struct device_node *np,
- 	const char *list_name, const char *stem_name, int index,
- 	struct of_phandle_args *out_args);
--extern int of_parse_phandle_with_fixed_args(const struct device_node *np,
--	const char *list_name, int cells_count, int index,
--	struct of_phandle_args *out_args);
- extern int of_count_phandle_with_args(const struct device_node *np,
- 	const char *list_name, const char *cells_name);
- 
-@@ -857,18 +851,12 @@ static inline int of_property_read_strin
- 	return -ENOSYS;
- }
- 
--static inline struct device_node *of_parse_phandle(const struct device_node *np,
--						   const char *phandle_name,
--						   int index)
--{
--	return NULL;
--}
--
--static inline int of_parse_phandle_with_args(const struct device_node *np,
--					     const char *list_name,
--					     const char *cells_name,
--					     int index,
--					     struct of_phandle_args *out_args)
-+static inline int __of_parse_phandle_with_args(const struct device_node *np,
-+					       const char *list_name,
-+					       const char *cells_name,
-+					       int cell_count,
-+					       int index,
-+					       struct of_phandle_args *out_args)
- {
- 	return -ENOSYS;
- }
-@@ -882,13 +870,6 @@ static inline int of_parse_phandle_with_
- 	return -ENOSYS;
- }
- 
--static inline int of_parse_phandle_with_fixed_args(const struct device_node *np,
--	const char *list_name, int cells_count, int index,
--	struct of_phandle_args *out_args)
--{
--	return -ENOSYS;
--}
--
- static inline int of_count_phandle_with_args(const struct device_node *np,
- 					     const char *list_name,
- 					     const char *cells_name)
-@@ -1065,6 +1046,117 @@ static inline bool of_node_is_type(const
- }
- 
- /**
-+ * of_parse_phandle - Resolve a phandle property to a device_node pointer
-+ * @np: Pointer to device node holding phandle property
-+ * @phandle_name: Name of property holding a phandle value
-+ * @index: For properties holding a table of phandles, this is the index into
-+ *         the table
-+ *
-+ * Return: The device_node pointer with refcount incremented.  Use
-+ * of_node_put() on it when done.
-+ */
-+static inline struct device_node *of_parse_phandle(const struct device_node *np,
-+						   const char *phandle_name,
-+						   int index)
-+{
-+	struct of_phandle_args args;
-+
-+	if (__of_parse_phandle_with_args(np, phandle_name, NULL, 0,
-+					 index, &args))
-+		return NULL;
-+
-+	return args.np;
-+}
-+
-+/**
-+ * of_parse_phandle_with_args() - Find a node pointed by phandle in a list
-+ * @np:		pointer to a device tree node containing a list
-+ * @list_name:	property name that contains a list
-+ * @cells_name:	property name that specifies phandles' arguments count
-+ * @index:	index of a phandle to parse out
-+ * @out_args:	optional pointer to output arguments structure (will be filled)
-+ *
-+ * This function is useful to parse lists of phandles and their arguments.
-+ * Returns 0 on success and fills out_args, on error returns appropriate
-+ * errno value.
-+ *
-+ * Caller is responsible to call of_node_put() on the returned out_args->np
-+ * pointer.
-+ *
-+ * Example::
-+ *
-+ *  phandle1: node1 {
-+ *	#list-cells = <2>;
-+ *  };
-+ *
-+ *  phandle2: node2 {
-+ *	#list-cells = <1>;
-+ *  };
-+ *
-+ *  node3 {
-+ *	list = <&phandle1 1 2 &phandle2 3>;
-+ *  };
-+ *
-+ * To get a device_node of the ``node2`` node you may call this:
-+ * of_parse_phandle_with_args(node3, "list", "#list-cells", 1, &args);
-+ */
-+static inline int of_parse_phandle_with_args(const struct device_node *np,
-+					     const char *list_name,
-+					     const char *cells_name,
-+					     int index,
-+					     struct of_phandle_args *out_args)
-+{
-+	int cell_count = -1;
-+
-+	/* If cells_name is NULL we assume a cell count of 0 */
-+	if (!cells_name)
-+		cell_count = 0;
-+
-+	return __of_parse_phandle_with_args(np, list_name, cells_name,
-+					    cell_count, index, out_args);
-+}
-+
-+/**
-+ * of_parse_phandle_with_fixed_args() - Find a node pointed by phandle in a list
-+ * @np:		pointer to a device tree node containing a list
-+ * @list_name:	property name that contains a list
-+ * @cell_count: number of argument cells following the phandle
-+ * @index:	index of a phandle to parse out
-+ * @out_args:	optional pointer to output arguments structure (will be filled)
-+ *
-+ * This function is useful to parse lists of phandles and their arguments.
-+ * Returns 0 on success and fills out_args, on error returns appropriate
-+ * errno value.
-+ *
-+ * Caller is responsible to call of_node_put() on the returned out_args->np
-+ * pointer.
-+ *
-+ * Example::
-+ *
-+ *  phandle1: node1 {
-+ *  };
-+ *
-+ *  phandle2: node2 {
-+ *  };
-+ *
-+ *  node3 {
-+ *	list = <&phandle1 0 2 &phandle2 2 3>;
-+ *  };
-+ *
-+ * To get a device_node of the ``node2`` node you may call this:
-+ * of_parse_phandle_with_fixed_args(node3, "list", 2, 1, &args);
-+ */
-+static inline int of_parse_phandle_with_fixed_args(const struct device_node *np,
-+						   const char *list_name,
-+						   int cell_count,
-+						   int index,
-+						   struct of_phandle_args *out_args)
-+{
-+	return __of_parse_phandle_with_args(np, list_name, NULL, cell_count,
-+					    index, out_args);
-+}
-+
-+/**
-  * of_property_count_u8_elems - Count the number of u8 elements in a property
-  *
-  * @np:		device node from which the property value is to be read.
diff --git a/target/linux/generic/backport-5.10/827-v6.3-0001-of-base-add-of_parse_phandle_with_optional_args.patch b/target/linux/generic/backport-5.10/827-v6.3-0001-of-base-add-of_parse_phandle_with_optional_args.patch
deleted file mode 100644
index 3606034b9b2c..000000000000
--- a/target/linux/generic/backport-5.10/827-v6.3-0001-of-base-add-of_parse_phandle_with_optional_args.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From c5d264d4b527c96ae8903376a4b195df47b05203 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:43 +0000
-Subject: [PATCH] of: base: add of_parse_phandle_with_optional_args()
-
-Add a new variant of the of_parse_phandle_with_args() which treats the
-cells name as optional. If it's missing, it is assumed that the phandle
-has no arguments.
-
-Up until now, a nvmem node didn't have any arguments, so all the device
-trees haven't any '#*-cells' property. But there is a need for an
-additional argument for the phandle, for which we need a '#*-cells'
-property. Therefore, we need to support nvmem nodes with and without
-this property.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-10-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- include/linux/of.h | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/include/linux/of.h
-+++ b/include/linux/of.h
-@@ -1157,6 +1157,31 @@ static inline int of_parse_phandle_with_
- }
- 
- /**
-+ * of_parse_phandle_with_optional_args() - Find a node pointed by phandle in a list
-+ * @np:		pointer to a device tree node containing a list
-+ * @list_name:	property name that contains a list
-+ * @cells_name:	property name that specifies phandles' arguments count
-+ * @index:	index of a phandle to parse out
-+ * @out_args:	optional pointer to output arguments structure (will be filled)
-+ *
-+ * Same as of_parse_phandle_with_args() except that if the cells_name property
-+ * is not found, cell_count of 0 is assumed.
-+ *
-+ * This is used to useful, if you have a phandle which didn't have arguments
-+ * before and thus doesn't have a '#*-cells' property but is now migrated to
-+ * having arguments while retaining backwards compatibility.
-+ */
-+static inline int of_parse_phandle_with_optional_args(const struct device_node *np,
-+						      const char *list_name,
-+						      const char *cells_name,
-+						      int index,
-+						      struct of_phandle_args *out_args)
-+{
-+	return __of_parse_phandle_with_args(np, list_name, cells_name,
-+					    0, index, out_args);
-+}
-+
-+/**
-  * of_property_count_u8_elems - Count the number of u8 elements in a property
-  *
-  * @np:		device node from which the property value is to be read.
diff --git a/target/linux/generic/backport-5.10/827-v6.3-0002-of-property-make-.-cells-optional-for-simple-props.patch b/target/linux/generic/backport-5.10/827-v6.3-0002-of-property-make-.-cells-optional-for-simple-props.patch
deleted file mode 100644
index 0c45679e9dd3..000000000000
--- a/target/linux/generic/backport-5.10/827-v6.3-0002-of-property-make-.-cells-optional-for-simple-props.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From ff24fed10ba414d19579e26e60b126fad2f2bb07 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:44 +0000
-Subject: [PATCH] of: property: make #.*-cells optional for simple props
-
-Sometimes, future bindings for phandles will get additional arguments.
-Thus the target node of the phandle will need a new #.*-cells property.
-To be backwards compatible, this needs to be optional.
-
-Prepare the DEFINE_SIMPLE_PROPS() to handle the cells name as optional.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-11-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/property.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/of/property.c
-+++ b/drivers/of/property.c
-@@ -1213,8 +1213,8 @@ static struct device_node *parse_prop_ce
- 	if (strcmp(prop_name, list_name))
- 		return NULL;
- 
--	if (of_parse_phandle_with_args(np, list_name, cells_name, index,
--				       &sup_args))
-+	if (__of_parse_phandle_with_args(np, list_name, cells_name, 0, index,
-+					 &sup_args))
- 		return NULL;
- 
- 	return sup_args.np;
diff --git a/target/linux/generic/backport-5.10/827-v6.3-0003-of-property-add-nvmem-cell-cells-property.patch b/target/linux/generic/backport-5.10/827-v6.3-0003-of-property-add-nvmem-cell-cells-property.patch
deleted file mode 100644
index 75ade3923246..000000000000
--- a/target/linux/generic/backport-5.10/827-v6.3-0003-of-property-add-nvmem-cell-cells-property.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From e2d8172043d2e50df19fcd59c11e5593de8188d7 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:45 +0000
-Subject: [PATCH] of: property: add #nvmem-cell-cells property
-
-Bindings describe the new '#nvmem-cell-cells' property. Now that the
-arguments count property is optional, we just add this property to the
-nvmem-cells.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-12-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/property.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/of/property.c
-+++ b/drivers/of/property.c
-@@ -1314,7 +1314,7 @@ DEFINE_SIMPLE_PROP(hwlocks, "hwlocks", "
- DEFINE_SIMPLE_PROP(extcon, "extcon", NULL)
- DEFINE_SIMPLE_PROP(interrupts_extended, "interrupts-extended",
- 					"#interrupt-cells")
--DEFINE_SIMPLE_PROP(nvmem_cells, "nvmem-cells", NULL)
-+DEFINE_SIMPLE_PROP(nvmem_cells, "nvmem-cells", "#nvmem-cell-cells")
- DEFINE_SIMPLE_PROP(phys, "phys", "#phy-cells")
- DEFINE_SIMPLE_PROP(wakeup_parent, "wakeup-parent", NULL)
- DEFINE_SIMPLE_PROP(pinctrl0, "pinctrl-0", NULL)
diff --git a/target/linux/generic/backport-5.10/827-v6.3-0004-of-device-Ignore-modalias-of-reused-nodes.patch b/target/linux/generic/backport-5.10/827-v6.3-0004-of-device-Ignore-modalias-of-reused-nodes.patch
deleted file mode 100644
index eed9dcc54e4b..000000000000
--- a/target/linux/generic/backport-5.10/827-v6.3-0004-of-device-Ignore-modalias-of-reused-nodes.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 553bd29700145e1849698985e9800f14e967da49 Mon Sep 17 00:00:00 2001
-From: Alexander Stein <alexander.stein@ew.tq-group.com>
-Date: Tue, 7 Feb 2023 12:05:29 +0100
-Subject: [PATCH] of: device: Ignore modalias of reused nodes
-
-If of_node is reused, do not use that node's modalias. This will hide
-the name of the actual device. This is rather prominent in USB glue
-drivers creating a platform device for the host controller.
-
-Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20230207110531.1060252-2-alexander.stein@ew.tq-group.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/device.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/of/device.c
-+++ b/drivers/of/device.c
-@@ -223,7 +223,7 @@ static ssize_t of_device_get_modalias(st
- 	ssize_t csize;
- 	ssize_t tsize;
- 
--	if ((!dev) || (!dev->of_node))
-+	if ((!dev) || (!dev->of_node) || dev->of_node_reused)
- 		return -ENODEV;
- 
- 	/* Name & Type */
-@@ -338,7 +338,7 @@ int of_device_uevent_modalias(struct dev
- {
- 	int sl;
- 
--	if ((!dev) || (!dev->of_node))
-+	if ((!dev) || (!dev->of_node) || dev->of_node_reused)
- 		return -ENODEV;
- 
- 	/* Devicetree modalias is tricky, we add it in 2 steps */
diff --git a/target/linux/generic/backport-5.10/827-v6.3-0005-of-device-Do-not-ignore-error-code-in-of_device_ueve.patch b/target/linux/generic/backport-5.10/827-v6.3-0005-of-device-Do-not-ignore-error-code-in-of_device_ueve.patch
deleted file mode 100644
index 64a2a20aa2c1..000000000000
--- a/target/linux/generic/backport-5.10/827-v6.3-0005-of-device-Do-not-ignore-error-code-in-of_device_ueve.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 2295bed9bebe8d1eef276194fed5b5fbe89c5363 Mon Sep 17 00:00:00 2001
-From: Alexander Stein <alexander.stein@ew.tq-group.com>
-Date: Tue, 7 Feb 2023 12:05:30 +0100
-Subject: [PATCH] of: device: Do not ignore error code in
- of_device_uevent_modalias
-
-of_device_get_modalias might return an error code, propagate that one.
-Otherwise the negative, signed integer is propagated to unsigned integer
-for the comparison resulting in a huge 'sl' size.
-
-Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20230207110531.1060252-3-alexander.stein@ew.tq-group.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/device.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/of/device.c
-+++ b/drivers/of/device.c
-@@ -347,6 +347,8 @@ int of_device_uevent_modalias(struct dev
- 
- 	sl = of_device_get_modalias(dev, &env->buf[env->buflen-1],
- 				    sizeof(env->buf) - env->buflen);
-+	if (sl < 0)
-+		return sl;
- 	if (sl >= (sizeof(env->buf) - env->buflen))
- 		return -ENOMEM;
- 	env->buflen += sl;
diff --git a/target/linux/generic/backport-5.10/828-v6.4-0001-of-Fix-modalias-string-generation.patch b/target/linux/generic/backport-5.10/828-v6.4-0001-of-Fix-modalias-string-generation.patch
deleted file mode 100644
index 580a897e98fa..000000000000
--- a/target/linux/generic/backport-5.10/828-v6.4-0001-of-Fix-modalias-string-generation.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From b19a4266c52de78496fe40f0b37580a3b762e67d Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:09 +0100
-Subject: [PATCH] of: Fix modalias string generation
-
-The helper generating an OF based modalias (of_device_get_modalias())
-works fine, but due to the use of snprintf() internally it needs a
-buffer one byte longer than what should be needed just for the entire
-string (excluding the '\0'). Most users of this helper are sysfs hooks
-providing the modalias string to users. They all provide a PAGE_SIZE
-buffer which is way above the number of bytes required to fit the
-modalias string and hence do not suffer from this issue.
-
-There is another user though, of_device_request_module(), which is only
-called by drivers/usb/common/ulpi.c. This request module function is
-faulty, but maybe because in most cases there is an alternative, ULPI
-driver users have not noticed it.
-
-In this function, of_device_get_modalias() is called twice. The first
-time without buffer just to get the number of bytes required by the
-modalias string (excluding the null byte), and a second time, after
-buffer allocation, to fill the buffer. The allocation asks for an
-additional byte, in order to store the trailing '\0'. However, the
-buffer *length* provided to of_device_get_modalias() excludes this extra
-byte. The internal use of snprintf() with a length that is exactly the
-number of bytes to be written has the effect of using the last available
-byte to store a '\0', which then smashes the last character of the
-modalias string.
-
-Provide the actual size of the buffer to of_device_get_modalias() to fix
-this issue.
-
-Note: the "str[size - 1] = '\0';" line is not really needed as snprintf
-will anyway end the string with a null byte, but there is a possibility
-that this function might be called on a struct device_node without
-compatible, in this case snprintf() would not be executed. So we keep it
-just to avoid possible unbounded strings.
-
-Cc: Stephen Boyd <sboyd@kernel.org>
-Cc: Peter Chen <peter.chen@kernel.org>
-Fixes: 9c829c097f2f ("of: device: Support loading a module with OF based modalias")
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/device.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/of/device.c
-+++ b/drivers/of/device.c
-@@ -264,12 +264,15 @@ int of_device_request_module(struct devi
- 	if (size < 0)
- 		return size;
- 
--	str = kmalloc(size + 1, GFP_KERNEL);
-+	/* Reserve an additional byte for the trailing '\0' */
-+	size++;
-+
-+	str = kmalloc(size, GFP_KERNEL);
- 	if (!str)
- 		return -ENOMEM;
- 
- 	of_device_get_modalias(dev, str, size);
--	str[size] = '\0';
-+	str[size - 1] = '\0';
- 	ret = request_module(str);
- 	kfree(str);
- 
diff --git a/target/linux/generic/backport-5.10/828-v6.4-0002-of-Update-of_device_get_modalias.patch b/target/linux/generic/backport-5.10/828-v6.4-0002-of-Update-of_device_get_modalias.patch
deleted file mode 100644
index eac4ced5ab50..000000000000
--- a/target/linux/generic/backport-5.10/828-v6.4-0002-of-Update-of_device_get_modalias.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From 5c3d15e127ebfc0754cd18def7124633b6d46672 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:15 +0100
-Subject: [PATCH] of: Update of_device_get_modalias()
-
-This function only needs a "struct device_node" to work, but for
-convenience the author (and only user) of this helper did use a "struct
-device" and put it in device.c.
-
-Let's convert this helper to take a "struct device node" instead. This
-change asks for two additional changes: renaming it "of_modalias()"
-to fit the current naming, and moving it outside of device.c which will
-be done in a follow-up commit.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/device.c | 29 +++++++++++++++++------------
- 1 file changed, 17 insertions(+), 12 deletions(-)
-
---- a/drivers/of/device.c
-+++ b/drivers/of/device.c
-@@ -215,7 +215,7 @@ const void *of_device_get_match_data(con
- }
- EXPORT_SYMBOL(of_device_get_match_data);
- 
--static ssize_t of_device_get_modalias(struct device *dev, char *str, ssize_t len)
-+static ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len)
- {
- 	const char *compat;
- 	char *c;
-@@ -223,19 +223,16 @@ static ssize_t of_device_get_modalias(st
- 	ssize_t csize;
- 	ssize_t tsize;
- 
--	if ((!dev) || (!dev->of_node) || dev->of_node_reused)
--		return -ENODEV;
--
- 	/* Name & Type */
- 	/* %p eats all alphanum characters, so %c must be used here */
--	csize = snprintf(str, len, "of:N%pOFn%c%s", dev->of_node, 'T',
--			 of_node_get_device_type(dev->of_node));
-+	csize = snprintf(str, len, "of:N%pOFn%c%s", np, 'T',
-+			 of_node_get_device_type(np));
- 	tsize = csize;
- 	len -= csize;
- 	if (str)
- 		str += csize;
- 
--	of_property_for_each_string(dev->of_node, "compatible", p, compat) {
-+	of_property_for_each_string(np, "compatible", p, compat) {
- 		csize = strlen(compat) + 1;
- 		tsize += csize;
- 		if (csize > len)
-@@ -260,7 +257,10 @@ int of_device_request_module(struct devi
- 	ssize_t size;
- 	int ret;
- 
--	size = of_device_get_modalias(dev, NULL, 0);
-+	if (!dev || !dev->of_node)
-+		return -ENODEV;
-+
-+	size = of_modalias(dev->of_node, NULL, 0);
- 	if (size < 0)
- 		return size;
- 
-@@ -271,7 +271,7 @@ int of_device_request_module(struct devi
- 	if (!str)
- 		return -ENOMEM;
- 
--	of_device_get_modalias(dev, str, size);
-+	of_modalias(dev->of_node, str, size);
- 	str[size - 1] = '\0';
- 	ret = request_module(str);
- 	kfree(str);
-@@ -285,7 +285,12 @@ EXPORT_SYMBOL_GPL(of_device_request_modu
-  */
- ssize_t of_device_modalias(struct device *dev, char *str, ssize_t len)
- {
--	ssize_t sl = of_device_get_modalias(dev, str, len - 2);
-+	ssize_t sl;
-+
-+	if (!dev || !dev->of_node || dev->of_node_reused)
-+		return -ENODEV;
-+
-+	sl = of_modalias(dev->of_node, str, len - 2);
- 	if (sl < 0)
- 		return sl;
- 	if (sl > len - 2)
-@@ -348,8 +353,8 @@ int of_device_uevent_modalias(struct dev
- 	if (add_uevent_var(env, "MODALIAS="))
- 		return -ENOMEM;
- 
--	sl = of_device_get_modalias(dev, &env->buf[env->buflen-1],
--				    sizeof(env->buf) - env->buflen);
-+	sl = of_modalias(dev->of_node, &env->buf[env->buflen-1],
-+			 sizeof(env->buf) - env->buflen);
- 	if (sl < 0)
- 		return sl;
- 	if (sl >= (sizeof(env->buf) - env->buflen))
diff --git a/target/linux/generic/backport-5.10/828-v6.4-0003-of-Rename-of_modalias_node.patch b/target/linux/generic/backport-5.10/828-v6.4-0003-of-Rename-of_modalias_node.patch
deleted file mode 100644
index 7e641211e6a6..000000000000
--- a/target/linux/generic/backport-5.10/828-v6.4-0003-of-Rename-of_modalias_node.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-From 673aa1ed1c9b6710bf24e3f0957d85e2f46c77db Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:16 +0100
-Subject: [PATCH] of: Rename of_modalias_node()
-
-This helper does not produce a real modalias, but tries to get the
-"product" compatible part of the "vendor,product" compatibles only. It
-is far from creating a purely useful modalias string and does not seem
-to be used like that directly anyway, so let's try to give this helper a
-more meaningful name before moving there a real modalias helper (already
-existing under of/device.c).
-
-Also update the various documentations to refer to the strings as
-"aliases" rather than "modaliases" which has a real meaning in the Linux
-kernel.
-
-There is no functional change.
-
-Cc: Rafael J. Wysocki <rafael@kernel.org>
-Cc: Len Brown <lenb@kernel.org>
-Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-Cc: Maxime Ripard <mripard@kernel.org>
-Cc: Thomas Zimmermann <tzimmermann@suse.de>
-Cc: Sebastian Reichel <sre@kernel.org>
-Cc: Wolfram Sang <wsa@kernel.org>
-Cc: Mark Brown <broonie@kernel.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Acked-by: Mark Brown <broonie@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Acked-by: Sebastian Reichel <sre@kernel.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-9-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/acpi/bus.c                |  7 ++++---
- drivers/gpu/drm/drm_mipi_dsi.c    |  2 +-
- drivers/hsi/hsi_core.c            |  2 +-
- drivers/i2c/busses/i2c-powermac.c |  2 +-
- drivers/i2c/i2c-core-of.c         |  2 +-
- drivers/of/base.c                 | 18 +++++++++++-------
- drivers/spi/spi.c                 |  4 ++--
- include/linux/of.h                |  3 ++-
- 8 files changed, 23 insertions(+), 17 deletions(-)
-
---- a/drivers/acpi/bus.c
-+++ b/drivers/acpi/bus.c
-@@ -693,9 +693,10 @@ static bool acpi_of_modalias(struct acpi
-  * @modalias:   Pointer to buffer that modalias value will be copied into
-  * @len:	Length of modalias buffer
-  *
-- * This is a counterpart of of_modalias_node() for struct acpi_device objects.
-- * If there is a compatible string for @adev, it will be copied to @modalias
-- * with the vendor prefix stripped; otherwise, @default_id will be used.
-+ * This is a counterpart of of_alias_from_compatible() for struct acpi_device
-+ * objects. If there is a compatible string for @adev, it will be copied to
-+ * @modalias with the vendor prefix stripped; otherwise, @default_id will be
-+ * used.
-  */
- void acpi_set_modalias(struct acpi_device *adev, const char *default_id,
- 		       char *modalias, size_t len)
---- a/drivers/gpu/drm/drm_mipi_dsi.c
-+++ b/drivers/gpu/drm/drm_mipi_dsi.c
-@@ -160,7 +160,7 @@ of_mipi_dsi_device_add(struct mipi_dsi_h
- 	int ret;
- 	u32 reg;
- 
--	if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
-+	if (of_alias_from_compatible(node, info.type, sizeof(info.type)) < 0) {
- 		drm_err(host, "modalias failure on %pOF\n", node);
- 		return ERR_PTR(-EINVAL);
- 	}
---- a/drivers/hsi/hsi_core.c
-+++ b/drivers/hsi/hsi_core.c
-@@ -207,7 +207,7 @@ static void hsi_add_client_from_dt(struc
- 	if (!cl)
- 		return;
- 
--	err = of_modalias_node(client, name, sizeof(name));
-+	err = of_alias_from_compatible(client, name, sizeof(name));
- 	if (err)
- 		goto err;
- 
---- a/drivers/i2c/busses/i2c-powermac.c
-+++ b/drivers/i2c/busses/i2c-powermac.c
-@@ -289,7 +289,7 @@ static bool i2c_powermac_get_type(struct
- 	 */
- 
- 	/* First try proper modalias */
--	if (of_modalias_node(node, tmp, sizeof(tmp)) >= 0) {
-+	if (of_alias_from_compatible(node, tmp, sizeof(tmp)) >= 0) {
- 		snprintf(type, type_size, "MAC,%s", tmp);
- 		return true;
- 	}
---- a/drivers/i2c/i2c-core-of.c
-+++ b/drivers/i2c/i2c-core-of.c
-@@ -27,7 +27,7 @@ int of_i2c_get_board_info(struct device
- 
- 	memset(info, 0, sizeof(*info));
- 
--	if (of_modalias_node(node, info->type, sizeof(info->type)) < 0) {
-+	if (of_alias_from_compatible(node, info->type, sizeof(info->type)) < 0) {
- 		dev_err(dev, "of_i2c: modalias failure on %pOF\n", node);
- 		return -EINVAL;
- 	}
---- a/drivers/of/base.c
-+++ b/drivers/of/base.c
-@@ -1160,19 +1160,23 @@ struct device_node *of_find_matching_nod
- EXPORT_SYMBOL(of_find_matching_node_and_match);
- 
- /**
-- * of_modalias_node - Lookup appropriate modalias for a device node
-+ * of_alias_from_compatible - Lookup appropriate alias for a device node
-+ *			      depending on compatible
-  * @node:	pointer to a device tree node
-- * @modalias:	Pointer to buffer that modalias value will be copied into
-- * @len:	Length of modalias value
-+ * @alias:	Pointer to buffer that alias value will be copied into
-+ * @len:	Length of alias value
-  *
-  * Based on the value of the compatible property, this routine will attempt
-- * to choose an appropriate modalias value for a particular device tree node.
-+ * to choose an appropriate alias value for a particular device tree node.
-  * It does this by stripping the manufacturer prefix (as delimited by a ',')
-  * from the first entry in the compatible list property.
-  *
-+ * Note: The matching on just the "product" side of the compatible is a relic
-+ * from I2C and SPI. Please do not add any new user.
-+ *
-  * Return: This routine returns 0 on success, <0 on failure.
-  */
--int of_modalias_node(struct device_node *node, char *modalias, int len)
-+int of_alias_from_compatible(const struct device_node *node, char *alias, int len)
- {
- 	const char *compatible, *p;
- 	int cplen;
-@@ -1181,10 +1185,10 @@ int of_modalias_node(struct device_node
- 	if (!compatible || strlen(compatible) > cplen)
- 		return -ENODEV;
- 	p = strchr(compatible, ',');
--	strlcpy(modalias, p ? p + 1 : compatible, len);
-+	strlcpy(alias, p ? p + 1 : compatible, len);
- 	return 0;
- }
--EXPORT_SYMBOL_GPL(of_modalias_node);
-+EXPORT_SYMBOL_GPL(of_alias_from_compatible);
- 
- /**
-  * of_find_node_by_phandle - Find a node given a phandle
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -2038,8 +2038,8 @@ of_register_spi_device(struct spi_contro
- 	}
- 
- 	/* Select device driver */
--	rc = of_modalias_node(nc, spi->modalias,
--				sizeof(spi->modalias));
-+	rc = of_alias_from_compatible(nc, spi->modalias,
-+				      sizeof(spi->modalias));
- 	if (rc < 0) {
- 		dev_err(&ctlr->dev, "cannot find modalias for %pOF\n", nc);
- 		goto err_out;
---- a/include/linux/of.h
-+++ b/include/linux/of.h
-@@ -361,7 +361,8 @@ extern int of_n_addr_cells(struct device
- extern int of_n_size_cells(struct device_node *np);
- extern const struct of_device_id *of_match_node(
- 	const struct of_device_id *matches, const struct device_node *node);
--extern int of_modalias_node(struct device_node *node, char *modalias, int len);
-+extern int of_alias_from_compatible(const struct device_node *node, char *alias,
-+				    int len);
- extern void of_print_phandle_args(const char *msg, const struct of_phandle_args *args);
- extern int __of_parse_phandle_with_args(const struct device_node *np,
- 	const char *list_name, const char *cells_name, int cell_count,
diff --git a/target/linux/generic/backport-5.10/828-v6.4-0004-of-Move-of_modalias-to-module.c.patch b/target/linux/generic/backport-5.10/828-v6.4-0004-of-Move-of_modalias-to-module.c.patch
deleted file mode 100644
index 62d1232bcdc5..000000000000
--- a/target/linux/generic/backport-5.10/828-v6.4-0004-of-Move-of_modalias-to-module.c.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From bd7a7ed774afd1a4174df34227626c95573be517 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:17 +0100
-Subject: [PATCH] of: Move of_modalias() to module.c
-
-Create a specific .c file for OF related module handling.
-Move of_modalias() inside as a first step.
-
-The helper is exposed through of.h even though it is only used by core
-files because the users from device.c will soon be split into an OF-only
-helper in module.c as well as a device-oriented inline helper in
-of_device.h. Putting this helper in of_private.h would require to
-include of_private.h from of_device.h, which is not acceptable.
-
-Suggested-by: Rob Herring <robh+dt@kernel.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-10-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/Makefile |  2 +-
- drivers/of/device.c | 37 -------------------------------------
- drivers/of/module.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
- include/linux/of.h  |  9 +++++++++
- 4 files changed, 54 insertions(+), 38 deletions(-)
- create mode 100644 drivers/of/module.c
-
---- a/drivers/of/Makefile
-+++ b/drivers/of/Makefile
-@@ -1,5 +1,5 @@
- # SPDX-License-Identifier: GPL-2.0
--obj-y = base.o device.o platform.o property.o
-+obj-y = base.o device.o module.o platform.o property.o
- obj-$(CONFIG_OF_KOBJ) += kobj.o
- obj-$(CONFIG_OF_DYNAMIC) += dynamic.o
- obj-$(CONFIG_OF_FLATTREE) += fdt.o
---- a/drivers/of/device.c
-+++ b/drivers/of/device.c
-@@ -1,5 +1,4 @@
- // SPDX-License-Identifier: GPL-2.0
--#include <linux/string.h>
- #include <linux/kernel.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -215,42 +214,6 @@ const void *of_device_get_match_data(con
- }
- EXPORT_SYMBOL(of_device_get_match_data);
- 
--static ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len)
--{
--	const char *compat;
--	char *c;
--	struct property *p;
--	ssize_t csize;
--	ssize_t tsize;
--
--	/* Name & Type */
--	/* %p eats all alphanum characters, so %c must be used here */
--	csize = snprintf(str, len, "of:N%pOFn%c%s", np, 'T',
--			 of_node_get_device_type(np));
--	tsize = csize;
--	len -= csize;
--	if (str)
--		str += csize;
--
--	of_property_for_each_string(np, "compatible", p, compat) {
--		csize = strlen(compat) + 1;
--		tsize += csize;
--		if (csize > len)
--			continue;
--
--		csize = snprintf(str, len, "C%s", compat);
--		for (c = str; c; ) {
--			c = strchr(c, ' ');
--			if (c)
--				*c++ = '_';
--		}
--		len -= csize;
--		str += csize;
--	}
--
--	return tsize;
--}
--
- int of_device_request_module(struct device *dev)
- {
- 	char *str;
---- /dev/null
-+++ b/drivers/of/module.c
-@@ -0,0 +1,44 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Linux kernel module helpers.
-+ */
-+
-+#include <linux/of.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+
-+ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len)
-+{
-+	const char *compat;
-+	char *c;
-+	struct property *p;
-+	ssize_t csize;
-+	ssize_t tsize;
-+
-+	/* Name & Type */
-+	/* %p eats all alphanum characters, so %c must be used here */
-+	csize = snprintf(str, len, "of:N%pOFn%c%s", np, 'T',
-+			 of_node_get_device_type(np));
-+	tsize = csize;
-+	len -= csize;
-+	if (str)
-+		str += csize;
-+
-+	of_property_for_each_string(np, "compatible", p, compat) {
-+		csize = strlen(compat) + 1;
-+		tsize += csize;
-+		if (csize > len)
-+			continue;
-+
-+		csize = snprintf(str, len, "C%s", compat);
-+		for (c = str; c; ) {
-+			c = strchr(c, ' ');
-+			if (c)
-+				*c++ = '_';
-+		}
-+		len -= csize;
-+		str += csize;
-+	}
-+
-+	return tsize;
-+}
---- a/include/linux/of.h
-+++ b/include/linux/of.h
-@@ -373,6 +373,9 @@ extern int of_parse_phandle_with_args_ma
- extern int of_count_phandle_with_args(const struct device_node *np,
- 	const char *list_name, const char *cells_name);
- 
-+/* module functions */
-+extern ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len);
-+
- /* phandle iterator functions */
- extern int of_phandle_iterator_init(struct of_phandle_iterator *it,
- 				    const struct device_node *np,
-@@ -878,6 +881,12 @@ static inline int of_count_phandle_with_
- 	return -ENOSYS;
- }
- 
-+static inline ssize_t of_modalias(const struct device_node *np, char *str,
-+				  ssize_t len)
-+{
-+	return -ENODEV;
-+}
-+
- static inline int of_phandle_iterator_init(struct of_phandle_iterator *it,
- 					   const struct device_node *np,
- 					   const char *list_name,
diff --git a/target/linux/generic/backport-5.10/828-v6.4-0005-of-Move-the-request-module-helper-logic-to-module.c.patch b/target/linux/generic/backport-5.10/828-v6.4-0005-of-Move-the-request-module-helper-logic-to-module.c.patch
deleted file mode 100644
index c176ff8f134e..000000000000
--- a/target/linux/generic/backport-5.10/828-v6.4-0005-of-Move-the-request-module-helper-logic-to-module.c.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From e6506f06d5e82765666902ccf9e9162f3e31d518 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:18 +0100
-Subject: [PATCH] of: Move the request module helper logic to module.c
-
-Depending on device.c for pure OF handling is considered
-backwards. Let's extract the content of of_device_request_module() to
-have the real logic under module.c.
-
-The next step will be to convert users of of_device_request_module() to
-use the new helper.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-11-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/device.c | 25 ++-----------------------
- drivers/of/module.c | 30 ++++++++++++++++++++++++++++++
- include/linux/of.h  |  6 ++++++
- 3 files changed, 38 insertions(+), 23 deletions(-)
-
---- a/drivers/of/device.c
-+++ b/drivers/of/device.c
-@@ -7,7 +7,6 @@
- #include <linux/dma-direct.h> /* for bus_dma_region */
- #include <linux/dma-map-ops.h>
- #include <linux/init.h>
--#include <linux/module.h>
- #include <linux/mod_devicetable.h>
- #include <linux/slab.h>
- #include <linux/platform_device.h>
-@@ -216,30 +215,10 @@ EXPORT_SYMBOL(of_device_get_match_data);
- 
- int of_device_request_module(struct device *dev)
- {
--	char *str;
--	ssize_t size;
--	int ret;
--
--	if (!dev || !dev->of_node)
-+	if (!dev)
- 		return -ENODEV;
- 
--	size = of_modalias(dev->of_node, NULL, 0);
--	if (size < 0)
--		return size;
--
--	/* Reserve an additional byte for the trailing '\0' */
--	size++;
--
--	str = kmalloc(size, GFP_KERNEL);
--	if (!str)
--		return -ENOMEM;
--
--	of_modalias(dev->of_node, str, size);
--	str[size - 1] = '\0';
--	ret = request_module(str);
--	kfree(str);
--
--	return ret;
-+	return of_request_module(dev->of_node);
- }
- EXPORT_SYMBOL_GPL(of_device_request_module);
- 
---- a/drivers/of/module.c
-+++ b/drivers/of/module.c
-@@ -4,6 +4,7 @@
-  */
- 
- #include <linux/of.h>
-+#include <linux/module.h>
- #include <linux/slab.h>
- #include <linux/string.h>
- 
-@@ -42,3 +43,32 @@ ssize_t of_modalias(const struct device_
- 
- 	return tsize;
- }
-+
-+int of_request_module(const struct device_node *np)
-+{
-+	char *str;
-+	ssize_t size;
-+	int ret;
-+
-+	if (!np)
-+		return -ENODEV;
-+
-+	size = of_modalias(np, NULL, 0);
-+	if (size < 0)
-+		return size;
-+
-+	/* Reserve an additional byte for the trailing '\0' */
-+	size++;
-+
-+	str = kmalloc(size, GFP_KERNEL);
-+	if (!str)
-+		return -ENOMEM;
-+
-+	of_modalias(np, str, size);
-+	str[size - 1] = '\0';
-+	ret = request_module(str);
-+	kfree(str);
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL_GPL(of_request_module);
---- a/include/linux/of.h
-+++ b/include/linux/of.h
-@@ -375,6 +375,7 @@ extern int of_count_phandle_with_args(co
- 
- /* module functions */
- extern ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len);
-+extern int of_request_module(const struct device_node *np);
- 
- /* phandle iterator functions */
- extern int of_phandle_iterator_init(struct of_phandle_iterator *it,
-@@ -886,6 +887,11 @@ static inline ssize_t of_modalias(const
- {
- 	return -ENODEV;
- }
-+
-+static inline int of_request_module(const struct device_node *np)
-+{
-+	return -ENODEV;
-+}
- 
- static inline int of_phandle_iterator_init(struct of_phandle_iterator *it,
- 					   const struct device_node *np,
diff --git a/target/linux/generic/backport-5.10/830-v5.14-leds-lp55xx-Initialize-enable-GPIO-direction-to-outp.patch b/target/linux/generic/backport-5.10/830-v5.14-leds-lp55xx-Initialize-enable-GPIO-direction-to-outp.patch
deleted file mode 100644
index 75b994739260..000000000000
--- a/target/linux/generic/backport-5.10/830-v5.14-leds-lp55xx-Initialize-enable-GPIO-direction-to-outp.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From a5d3d1adc95f4ac5968b7a77ee95a3abbbb96f49 Mon Sep 17 00:00:00 2001
-From: Doug Zobel <dougdev334@gmail.com>
-Date: Mon, 10 May 2021 15:40:00 -0500
-Subject: [PATCH] leds: lp55xx: Initialize enable GPIO direction to output
-
-The "Convert to use GPIO descriptors" commit changed the
-initialization of the enable GPIO from GPIOF_DIR_OUT to
-GPIOD_ASIS.  This breaks systems where the GPIO does not
-default to output.  Changing the enable initialization
-to GPIOD_OUT_LOW.
-
-Signed-off-by: Doug Zobel <dougdev334@gmail.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/leds-lp55xx-common.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/leds/leds-lp55xx-common.c
-+++ b/drivers/leds/leds-lp55xx-common.c
-@@ -694,7 +694,7 @@ struct lp55xx_platform_data *lp55xx_of_p
- 	of_property_read_u8(np, "clock-mode", &pdata->clock_mode);
- 
- 	pdata->enable_gpiod = devm_gpiod_get_optional(dev, "enable",
--						      GPIOD_ASIS);
-+						      GPIOD_OUT_LOW);
- 	if (IS_ERR(pdata->enable_gpiod))
- 		return ERR_CAST(pdata->enable_gpiod);
- 
diff --git a/target/linux/generic/backport-5.10/840-v5.15-leds-pca955x-clean-up-code-formatting.patch b/target/linux/generic/backport-5.10/840-v5.15-leds-pca955x-clean-up-code-formatting.patch
deleted file mode 100644
index 80257c2ea068..000000000000
--- a/target/linux/generic/backport-5.10/840-v5.15-leds-pca955x-clean-up-code-formatting.patch
+++ /dev/null
@@ -1,176 +0,0 @@
-From 2420ae02ce0a926819ebe18f809a57bff3edeac2 Mon Sep 17 00:00:00 2001
-From: Eddie James <eajames@linux.ibm.com>
-Date: Fri, 16 Jul 2021 17:03:27 -0500
-Subject: [PATCH] leds: pca955x: Clean up code formatting
-
-Format the code. Add some variables to help shorten lines.
-
-Signed-off-by: Eddie James <eajames@linux.ibm.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/leds-pca955x.c | 63 ++++++++++++++++++-------------------
- 1 file changed, 30 insertions(+), 33 deletions(-)
-
---- a/drivers/leds/leds-pca955x.c
-+++ b/drivers/leds/leds-pca955x.c
-@@ -166,11 +166,10 @@ static inline u8 pca955x_ledsel(u8 oldva
- static int pca955x_write_psc(struct i2c_client *client, int n, u8 val)
- {
- 	struct pca955x *pca955x = i2c_get_clientdata(client);
-+	u8 cmd = pca95xx_num_input_regs(pca955x->chipdef->bits) + (2 * n);
- 	int ret;
- 
--	ret = i2c_smbus_write_byte_data(client,
--		pca95xx_num_input_regs(pca955x->chipdef->bits) + 2*n,
--		val);
-+	ret = i2c_smbus_write_byte_data(client, cmd, val);
- 	if (ret < 0)
- 		dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
- 			__func__, n, val, ret);
-@@ -187,11 +186,10 @@ static int pca955x_write_psc(struct i2c_
- static int pca955x_write_pwm(struct i2c_client *client, int n, u8 val)
- {
- 	struct pca955x *pca955x = i2c_get_clientdata(client);
-+	u8 cmd = pca95xx_num_input_regs(pca955x->chipdef->bits) + 1 + (2 * n);
- 	int ret;
- 
--	ret = i2c_smbus_write_byte_data(client,
--		pca95xx_num_input_regs(pca955x->chipdef->bits) + 1 + 2*n,
--		val);
-+	ret = i2c_smbus_write_byte_data(client, cmd, val);
- 	if (ret < 0)
- 		dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
- 			__func__, n, val, ret);
-@@ -205,11 +203,10 @@ static int pca955x_write_pwm(struct i2c_
- static int pca955x_write_ls(struct i2c_client *client, int n, u8 val)
- {
- 	struct pca955x *pca955x = i2c_get_clientdata(client);
-+	u8 cmd = pca95xx_num_input_regs(pca955x->chipdef->bits) + 4 + n;
- 	int ret;
- 
--	ret = i2c_smbus_write_byte_data(client,
--		pca95xx_num_input_regs(pca955x->chipdef->bits) + 4 + n,
--		val);
-+	ret = i2c_smbus_write_byte_data(client, cmd, val);
- 	if (ret < 0)
- 		dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
- 			__func__, n, val, ret);
-@@ -223,10 +220,10 @@ static int pca955x_write_ls(struct i2c_c
- static int pca955x_read_ls(struct i2c_client *client, int n, u8 *val)
- {
- 	struct pca955x *pca955x = i2c_get_clientdata(client);
-+	u8 cmd = pca95xx_num_input_regs(pca955x->chipdef->bits) + 4 + n;
- 	int ret;
- 
--	ret = i2c_smbus_read_byte_data(client,
--		pca95xx_num_input_regs(pca955x->chipdef->bits) + 4 + n);
-+	ret = i2c_smbus_read_byte_data(client, cmd);
- 	if (ret < 0) {
- 		dev_err(&client->dev, "%s: reg 0x%x, err %d\n",
- 			__func__, n, ret);
-@@ -371,6 +368,7 @@ static struct pca955x_platform_data *
- pca955x_get_pdata(struct i2c_client *client, struct pca955x_chipdef *chip)
- {
- 	struct pca955x_platform_data *pdata;
-+	struct pca955x_led *led;
- 	struct fwnode_handle *child;
- 	int count;
- 
-@@ -401,13 +399,13 @@ pca955x_get_pdata(struct i2c_client *cli
- 		if ((res != 0) && is_of_node(child))
- 			name = to_of_node(child)->name;
- 
--		snprintf(pdata->leds[reg].name, sizeof(pdata->leds[reg].name),
--			 "%s", name);
-+		led = &pdata->leds[reg];
-+		snprintf(led->name, sizeof(led->name), "%s", name);
- 
--		pdata->leds[reg].type = PCA955X_TYPE_LED;
--		fwnode_property_read_u32(child, "type", &pdata->leds[reg].type);
-+		led->type = PCA955X_TYPE_LED;
-+		fwnode_property_read_u32(child, "type", &led->type);
- 		fwnode_property_read_string(child, "linux,default-trigger",
--					&pdata->leds[reg].default_trigger);
-+					    &led->default_trigger);
- 	}
- 
- 	pdata->num_leds = chip->bits;
-@@ -426,11 +424,12 @@ static const struct of_device_id of_pca9
- MODULE_DEVICE_TABLE(of, of_pca955x_match);
- 
- static int pca955x_probe(struct i2c_client *client,
--					const struct i2c_device_id *id)
-+			 const struct i2c_device_id *id)
- {
- 	struct pca955x *pca955x;
- 	struct pca955x_led *pca955x_led;
- 	struct pca955x_chipdef *chip;
-+	struct led_classdev *led;
- 	struct i2c_adapter *adapter;
- 	int i, err;
- 	struct pca955x_platform_data *pdata;
-@@ -449,13 +448,13 @@ static int pca955x_probe(struct i2c_clie
- 	if ((client->addr & ~((1 << chip->slv_addr_shift) - 1)) !=
- 	    chip->slv_addr) {
- 		dev_err(&client->dev, "invalid slave address %02x\n",
--				client->addr);
-+			client->addr);
- 		return -ENODEV;
- 	}
- 
- 	dev_info(&client->dev, "leds-pca955x: Using %s %d-bit LED driver at "
--			"slave address 0x%02x\n",
--			client->name, chip->bits, client->addr);
-+		 "slave address 0x%02x\n", client->name, chip->bits,
-+		 client->addr);
- 
- 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- 		return -EIO;
-@@ -471,8 +470,8 @@ static int pca955x_probe(struct i2c_clie
- 	if (!pca955x)
- 		return -ENOMEM;
- 
--	pca955x->leds = devm_kcalloc(&client->dev,
--			chip->bits, sizeof(*pca955x_led), GFP_KERNEL);
-+	pca955x->leds = devm_kcalloc(&client->dev, chip->bits,
-+				     sizeof(*pca955x_led), GFP_KERNEL);
- 	if (!pca955x->leds)
- 		return -ENOMEM;
- 
-@@ -501,27 +500,25 @@ static int pca955x_probe(struct i2c_clie
- 			 */
- 			if (pdata->leds[i].name[0] == '\0')
- 				snprintf(pdata->leds[i].name,
--					sizeof(pdata->leds[i].name), "%d", i);
-+					 sizeof(pdata->leds[i].name), "%d", i);
- 
--			snprintf(pca955x_led->name,
--				sizeof(pca955x_led->name), "pca955x:%s",
--				pdata->leds[i].name);
-+			snprintf(pca955x_led->name, sizeof(pca955x_led->name),
-+				 "pca955x:%s", pdata->leds[i].name);
- 
-+			led = &pca955x_led->led_cdev;
- 			if (pdata->leds[i].default_trigger)
--				pca955x_led->led_cdev.default_trigger =
-+				led->default_trigger =
- 					pdata->leds[i].default_trigger;
- 
--			pca955x_led->led_cdev.name = pca955x_led->name;
--			pca955x_led->led_cdev.brightness_set_blocking =
--				pca955x_led_set;
-+			led->name = pca955x_led->name;
-+			led->brightness_set_blocking = pca955x_led_set;
- 
--			err = devm_led_classdev_register(&client->dev,
--							&pca955x_led->led_cdev);
-+			err = devm_led_classdev_register(&client->dev, led);
- 			if (err)
- 				return err;
- 
- 			/* Turn off LED */
--			err = pca955x_led_set(&pca955x_led->led_cdev, LED_OFF);
-+			err = pca955x_led_set(led, LED_OFF);
- 			if (err)
- 				return err;
- 		}
diff --git a/target/linux/generic/backport-5.10/841-v5.15-leds-pca955x-add-brightness-get-function.patch b/target/linux/generic/backport-5.10/841-v5.15-leds-pca955x-add-brightness-get-function.patch
deleted file mode 100644
index bdb095dc2e69..000000000000
--- a/target/linux/generic/backport-5.10/841-v5.15-leds-pca955x-add-brightness-get-function.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 7086625fde6538b2c0623eb767ad23c7ac3d7f3a Mon Sep 17 00:00:00 2001
-From: Eddie James <eajames@linux.ibm.com>
-Date: Fri, 16 Jul 2021 17:03:28 -0500
-Subject: [PATCH] leds: pca955x: Add brightness_get function
-
-Add a function to fetch the state of the hardware LED.
-
-Signed-off-by: Eddie James <eajames@linux.ibm.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/leds-pca955x.c | 52 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 52 insertions(+)
-
---- a/drivers/leds/leds-pca955x.c
-+++ b/drivers/leds/leds-pca955x.c
-@@ -233,6 +233,57 @@ static int pca955x_read_ls(struct i2c_cl
- 	return 0;
- }
- 
-+static int pca955x_read_pwm(struct i2c_client *client, int n, u8 *val)
-+{
-+	struct pca955x *pca955x = i2c_get_clientdata(client);
-+	u8 cmd = pca95xx_num_input_regs(pca955x->chipdef->bits) + 1 + (2 * n);
-+	int ret;
-+
-+	ret = i2c_smbus_read_byte_data(client, cmd);
-+	if (ret < 0) {
-+		dev_err(&client->dev, "%s: reg 0x%x, err %d\n",
-+			__func__, n, ret);
-+		return ret;
-+	}
-+	*val = (u8)ret;
-+	return 0;
-+}
-+
-+static enum led_brightness pca955x_led_get(struct led_classdev *led_cdev)
-+{
-+	struct pca955x_led *pca955x_led = container_of(led_cdev,
-+						       struct pca955x_led,
-+						       led_cdev);
-+	struct pca955x *pca955x = pca955x_led->pca955x;
-+	u8 ls, pwm;
-+	int ret;
-+
-+	ret = pca955x_read_ls(pca955x->client, pca955x_led->led_num / 4, &ls);
-+	if (ret)
-+		return ret;
-+
-+	ls = (ls >> ((pca955x_led->led_num % 4) << 1)) & 0x3;
-+	switch (ls) {
-+	case PCA955X_LS_LED_ON:
-+		ret = LED_FULL;
-+		break;
-+	case PCA955X_LS_LED_OFF:
-+		ret = LED_OFF;
-+		break;
-+	case PCA955X_LS_BLINK0:
-+		ret = LED_HALF;
-+		break;
-+	case PCA955X_LS_BLINK1:
-+		ret = pca955x_read_pwm(pca955x->client, 1, &pwm);
-+		if (ret)
-+			return ret;
-+		ret = 255 - pwm;
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
- static int pca955x_led_set(struct led_classdev *led_cdev,
- 			    enum led_brightness value)
- {
-@@ -512,6 +563,7 @@ static int pca955x_probe(struct i2c_clie
- 
- 			led->name = pca955x_led->name;
- 			led->brightness_set_blocking = pca955x_led_set;
-+			led->brightness_get = pca955x_led_get;
- 
- 			err = devm_led_classdev_register(&client->dev, led);
- 			if (err)
diff --git a/target/linux/generic/backport-5.10/842-v5.15-leds-pca955x-implement-the-default-state-property.patch b/target/linux/generic/backport-5.10/842-v5.15-leds-pca955x-implement-the-default-state-property.patch
deleted file mode 100644
index 8c79eb1b674d..000000000000
--- a/target/linux/generic/backport-5.10/842-v5.15-leds-pca955x-implement-the-default-state-property.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From e46cb6d0c760a5b15e38138845fad99628fafcb8 Mon Sep 17 00:00:00 2001
-From: Eddie James <eajames@linux.ibm.com>
-Date: Fri, 16 Jul 2021 17:03:29 -0500
-Subject: [PATCH] leds: pca955x: Implement the default-state property
-
-In order to retain the LED state after a system reboot, check the
-documented default-state device tree property during initialization.
-Modify the behavior of the probe according to the property.
-
-Signed-off-by: Eddie James <eajames@linux.ibm.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/leds-pca955x.c | 54 +++++++++++++++++++++++++++++++------
- 1 file changed, 46 insertions(+), 8 deletions(-)
-
---- a/drivers/leds/leds-pca955x.c
-+++ b/drivers/leds/leds-pca955x.c
-@@ -129,6 +129,7 @@ struct pca955x_led {
- 	int			led_num;	/* 0 .. 15 potentially */
- 	char			name[32];
- 	u32			type;
-+	int			default_state;
- 	const char		*default_trigger;
- };
- 
-@@ -439,6 +440,7 @@ pca955x_get_pdata(struct i2c_client *cli
- 
- 	device_for_each_child_node(&client->dev, child) {
- 		const char *name;
-+		const char *state;
- 		u32 reg;
- 		int res;
- 
-@@ -457,6 +459,18 @@ pca955x_get_pdata(struct i2c_client *cli
- 		fwnode_property_read_u32(child, "type", &led->type);
- 		fwnode_property_read_string(child, "linux,default-trigger",
- 					    &led->default_trigger);
-+
-+		if (!fwnode_property_read_string(child, "default-state",
-+						 &state)) {
-+			if (!strcmp(state, "keep"))
-+				led->default_state = LEDS_GPIO_DEFSTATE_KEEP;
-+			else if (!strcmp(state, "on"))
-+				led->default_state = LEDS_GPIO_DEFSTATE_ON;
-+			else
-+				led->default_state = LEDS_GPIO_DEFSTATE_OFF;
-+		} else {
-+			led->default_state = LEDS_GPIO_DEFSTATE_OFF;
-+		}
- 	}
- 
- 	pdata->num_leds = chip->bits;
-@@ -485,6 +499,7 @@ static int pca955x_probe(struct i2c_clie
- 	int i, err;
- 	struct pca955x_platform_data *pdata;
- 	int ngpios = 0;
-+	bool keep_pwm = false;
- 
- 	chip = &pca955x_chipdefs[id->driver_data];
- 	adapter = client->adapter;
-@@ -565,14 +580,35 @@ static int pca955x_probe(struct i2c_clie
- 			led->brightness_set_blocking = pca955x_led_set;
- 			led->brightness_get = pca955x_led_get;
- 
-+			if (pdata->leds[i].default_state ==
-+			    LEDS_GPIO_DEFSTATE_OFF) {
-+				err = pca955x_led_set(led, LED_OFF);
-+				if (err)
-+					return err;
-+			} else if (pdata->leds[i].default_state ==
-+				   LEDS_GPIO_DEFSTATE_ON) {
-+				err = pca955x_led_set(led, LED_FULL);
-+				if (err)
-+					return err;
-+			}
-+
- 			err = devm_led_classdev_register(&client->dev, led);
- 			if (err)
- 				return err;
- 
--			/* Turn off LED */
--			err = pca955x_led_set(led, LED_OFF);
--			if (err)
--				return err;
-+			/*
-+			 * For default-state == "keep", let the core update the
-+			 * brightness from the hardware, then check the
-+			 * brightness to see if it's using PWM1. If so, PWM1
-+			 * should not be written below.
-+			 */
-+			if (pdata->leds[i].default_state ==
-+			    LEDS_GPIO_DEFSTATE_KEEP) {
-+				if (led->brightness != LED_FULL &&
-+				    led->brightness != LED_OFF &&
-+				    led->brightness != LED_HALF)
-+					keep_pwm = true;
-+			}
- 		}
- 	}
- 
-@@ -581,10 +617,12 @@ static int pca955x_probe(struct i2c_clie
- 	if (err)
- 		return err;
- 
--	/* PWM1 is used for variable brightness, default to OFF */
--	err = pca955x_write_pwm(client, 1, 0);
--	if (err)
--		return err;
-+	if (!keep_pwm) {
-+		/* PWM1 is used for variable brightness, default to OFF */
-+		err = pca955x_write_pwm(client, 1, 0);
-+		if (err)
-+			return err;
-+	}
- 
- 	/* Set to fast frequency so we do not see flashing */
- 	err = pca955x_write_psc(client, 0, 0);
diff --git a/target/linux/generic/backport-5.10/843-v5.15-leds-pca955x-let-the-core-process-the-fwnode.patch b/target/linux/generic/backport-5.10/843-v5.15-leds-pca955x-let-the-core-process-the-fwnode.patch
deleted file mode 100644
index 11311b8b2bed..000000000000
--- a/target/linux/generic/backport-5.10/843-v5.15-leds-pca955x-let-the-core-process-the-fwnode.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 7c4815929276b2e223eb6f2e49afe5071d4294a5 Mon Sep 17 00:00:00 2001
-From: Eddie James <eajames@linux.ibm.com>
-Date: Fri, 16 Jul 2021 17:03:30 -0500
-Subject: [PATCH] leds: pca955x: Let the core process the fwnode
-
-Much of the fwnode processing in the PCA955x driver is now in the
-LEDs core driver, so pass the fwnode in the init data when
-registering the LED device. In order to preserve the existing naming
-scheme, check for an empty name and set it to the LED number.
-
-Signed-off-by: Eddie James <eajames@linux.ibm.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/leds-pca955x.c | 58 +++++++++++++++++++------------------
- 1 file changed, 30 insertions(+), 28 deletions(-)
-
---- a/drivers/leds/leds-pca955x.c
-+++ b/drivers/leds/leds-pca955x.c
-@@ -127,10 +127,9 @@ struct pca955x_led {
- 	struct pca955x	*pca955x;
- 	struct led_classdev	led_cdev;
- 	int			led_num;	/* 0 .. 15 potentially */
--	char			name[32];
- 	u32			type;
- 	int			default_state;
--	const char		*default_trigger;
-+	struct fwnode_handle	*fwnode;
- };
- 
- struct pca955x_platform_data {
-@@ -439,7 +438,6 @@ pca955x_get_pdata(struct i2c_client *cli
- 		return ERR_PTR(-ENOMEM);
- 
- 	device_for_each_child_node(&client->dev, child) {
--		const char *name;
- 		const char *state;
- 		u32 reg;
- 		int res;
-@@ -448,17 +446,10 @@ pca955x_get_pdata(struct i2c_client *cli
- 		if ((res != 0) || (reg >= chip->bits))
- 			continue;
- 
--		res = fwnode_property_read_string(child, "label", &name);
--		if ((res != 0) && is_of_node(child))
--			name = to_of_node(child)->name;
--
- 		led = &pdata->leds[reg];
--		snprintf(led->name, sizeof(led->name), "%s", name);
--
- 		led->type = PCA955X_TYPE_LED;
-+		led->fwnode = child;
- 		fwnode_property_read_u32(child, "type", &led->type);
--		fwnode_property_read_string(child, "linux,default-trigger",
--					    &led->default_trigger);
- 
- 		if (!fwnode_property_read_string(child, "default-state",
- 						 &state)) {
-@@ -495,11 +486,14 @@ static int pca955x_probe(struct i2c_clie
- 	struct pca955x_led *pca955x_led;
- 	struct pca955x_chipdef *chip;
- 	struct led_classdev *led;
-+	struct led_init_data init_data;
- 	struct i2c_adapter *adapter;
- 	int i, err;
- 	struct pca955x_platform_data *pdata;
- 	int ngpios = 0;
-+	bool set_default_label = false;
- 	bool keep_pwm = false;
-+	char default_label[8];
- 
- 	chip = &pca955x_chipdefs[id->driver_data];
- 	adapter = client->adapter;
-@@ -547,6 +541,9 @@ static int pca955x_probe(struct i2c_clie
- 	pca955x->client = client;
- 	pca955x->chipdef = chip;
- 
-+	init_data.devname_mandatory = false;
-+	init_data.devicename = "pca955x";
-+
- 	for (i = 0; i < chip->bits; i++) {
- 		pca955x_led = &pca955x->leds[i];
- 		pca955x_led->led_num = i;
-@@ -560,23 +557,7 @@ static int pca955x_probe(struct i2c_clie
- 			ngpios++;
- 			break;
- 		case PCA955X_TYPE_LED:
--			/*
--			 * Platform data can specify LED names and
--			 * default triggers
--			 */
--			if (pdata->leds[i].name[0] == '\0')
--				snprintf(pdata->leds[i].name,
--					 sizeof(pdata->leds[i].name), "%d", i);
--
--			snprintf(pca955x_led->name, sizeof(pca955x_led->name),
--				 "pca955x:%s", pdata->leds[i].name);
--
- 			led = &pca955x_led->led_cdev;
--			if (pdata->leds[i].default_trigger)
--				led->default_trigger =
--					pdata->leds[i].default_trigger;
--
--			led->name = pca955x_led->name;
- 			led->brightness_set_blocking = pca955x_led_set;
- 			led->brightness_get = pca955x_led_get;
- 
-@@ -592,7 +573,28 @@ static int pca955x_probe(struct i2c_clie
- 					return err;
- 			}
- 
--			err = devm_led_classdev_register(&client->dev, led);
-+			init_data.fwnode = pdata->leds[i].fwnode;
-+
-+			if (is_of_node(init_data.fwnode)) {
-+				if (to_of_node(init_data.fwnode)->name[0] ==
-+				    '\0')
-+					set_default_label = true;
-+				else
-+					set_default_label = false;
-+			} else {
-+				set_default_label = true;
-+			}
-+
-+			if (set_default_label) {
-+				snprintf(default_label, sizeof(default_label),
-+					 "%d", i);
-+				init_data.default_label = default_label;
-+			} else {
-+				init_data.default_label = NULL;
-+			}
-+
-+			err = devm_led_classdev_register_ext(&client->dev, led,
-+							     &init_data);
- 			if (err)
- 				return err;
- 
diff --git a/target/linux/generic/backport-5.10/844-v5.15-leds-pca955x-switch-to-i2c-probe-new.patch b/target/linux/generic/backport-5.10/844-v5.15-leds-pca955x-switch-to-i2c-probe-new.patch
deleted file mode 100644
index 8154cd66f182..000000000000
--- a/target/linux/generic/backport-5.10/844-v5.15-leds-pca955x-switch-to-i2c-probe-new.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 239f32b4f161c1584cd4b386d6ab8766432a6ede Mon Sep 17 00:00:00 2001
-From: Eddie James <eajames@linux.ibm.com>
-Date: Fri, 16 Jul 2021 17:03:31 -0500
-Subject: [PATCH] leds: pca955x: Switch to i2c probe_new
-
-The deprecated i2c probe functionality doesn't work with OF
-compatible strings, as it only checks for the i2c device id. Switch
-to the new way of probing and grab the match data to select the
-chip type.
-
-Signed-off-by: Eddie James <eajames@linux.ibm.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/leds-pca955x.c | 23 +++++++++++++++++++----
- 1 file changed, 19 insertions(+), 4 deletions(-)
-
---- a/drivers/leds/leds-pca955x.c
-+++ b/drivers/leds/leds-pca955x.c
-@@ -479,8 +479,7 @@ static const struct of_device_id of_pca9
- };
- MODULE_DEVICE_TABLE(of, of_pca955x_match);
- 
--static int pca955x_probe(struct i2c_client *client,
--			 const struct i2c_device_id *id)
-+static int pca955x_probe(struct i2c_client *client)
- {
- 	struct pca955x *pca955x;
- 	struct pca955x_led *pca955x_led;
-@@ -494,8 +493,24 @@ static int pca955x_probe(struct i2c_clie
- 	bool set_default_label = false;
- 	bool keep_pwm = false;
- 	char default_label[8];
-+	enum pca955x_type chip_type;
-+	const void *md = device_get_match_data(&client->dev);
- 
--	chip = &pca955x_chipdefs[id->driver_data];
-+	if (md) {
-+		chip_type = (enum pca955x_type)md;
-+	} else {
-+		const struct i2c_device_id *id = i2c_match_id(pca955x_id,
-+							      client);
-+
-+		if (id) {
-+			chip_type = (enum pca955x_type)id->driver_data;
-+		} else {
-+			dev_err(&client->dev, "unknown chip\n");
-+			return -ENODEV;
-+		}
-+	}
-+
-+	chip = &pca955x_chipdefs[chip_type];
- 	adapter = client->adapter;
- 	pdata = dev_get_platdata(&client->dev);
- 	if (!pdata) {
-@@ -670,7 +685,7 @@ static struct i2c_driver pca955x_driver
- 		.name	= "leds-pca955x",
- 		.of_match_table = of_pca955x_match,
- 	},
--	.probe	= pca955x_probe,
-+	.probe_new = pca955x_probe,
- 	.id_table = pca955x_id,
- };
- 
diff --git a/target/linux/generic/backport-5.10/845-v6.0-0001-dt-bindings-leds-add-Broadcom-s-BCM63138-controller.patch b/target/linux/generic/backport-5.10/845-v6.0-0001-dt-bindings-leds-add-Broadcom-s-BCM63138-controller.patch
deleted file mode 100644
index b1072ce6408d..000000000000
--- a/target/linux/generic/backport-5.10/845-v6.0-0001-dt-bindings-leds-add-Broadcom-s-BCM63138-controller.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From 13344f8ce8a0d98aa7f5d69ce3b47393c73a343b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 27 Dec 2021 15:59:04 +0100
-Subject: [PATCH] dt-bindings: leds: add Broadcom's BCM63138 controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom used 2 LEDs hardware blocks for their BCM63xx SoCs:
-1. Older one (BCM6318, BCM6328, BCM6362, BCM63268, BCM6838)
-2. Newer one (BCM6848, BCM6858, BCM63138, BCM63148, BCM63381, BCM68360)
-
-The newer one was also later also used on BCM4908 SoC.
-
-Old block is already documented in the leds-bcm6328.yaml. This binding
-documents the new one which uses different registers & programming. It's
-first used in BCM63138 thus the binding name.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- .../bindings/leds/leds-bcm63138.yaml          | 95 +++++++++++++++++++
- 1 file changed, 95 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-@@ -0,0 +1,95 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom's BCM63138 LEDs controller
-+
-+maintainers:
-+  - Rafał Miłecki <rafal@milecki.pl>
-+
-+description: |
-+  This LEDs controller was first used on BCM63138 and later reused on BCM4908,
-+  BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs.
-+
-+  It supports up to 32 LEDs that can be connected parallelly or serially. It
-+  also includes limited support for hardware blinking.
-+
-+  Binding serially connected LEDs isn't documented yet.
-+
-+properties:
-+  compatible:
-+    oneOf:
-+      - items:
-+          - enum:
-+              - brcm,bcm4908-leds
-+              - brcm,bcm6848-leds
-+              - brcm,bcm6858-leds
-+              - brcm,bcm63148-leds
-+              - brcm,bcm63381-leds
-+              - brcm,bcm68360-leds
-+          - const: brcm,bcm63138-leds
-+      - const: brcm,bcm63138-leds
-+
-+  reg:
-+    maxItems: 1
-+
-+  "#address-cells":
-+    const: 1
-+
-+  "#size-cells":
-+    const: 0
-+
-+patternProperties:
-+  "^led@[a-f0-9]+$":
-+    type: object
-+
-+    $ref: common.yaml#
-+
-+    properties:
-+      reg:
-+        maxItems: 1
-+        description: LED pin number
-+
-+      active-low:
-+        type: boolean
-+        description: Makes LED active low.
-+
-+    required:
-+      - reg
-+
-+    unevaluatedProperties: false
-+
-+required:
-+  - reg
-+  - "#address-cells"
-+  - "#size-cells"
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/leds/common.h>
-+
-+    leds@ff800800 {
-+        compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
-+        reg = <0xff800800 0xdc>;
-+
-+        #address-cells = <1>;
-+        #size-cells = <0>;
-+
-+        led@0 {
-+            reg = <0x0>;
-+            function = LED_FUNCTION_POWER;
-+            color = <LED_COLOR_ID_GREEN>;
-+            default-state = "on";
-+        };
-+
-+        led@3 {
-+            reg = <0x3>;
-+            function = LED_FUNCTION_STATUS;
-+            color = <LED_COLOR_ID_GREEN>;
-+            active-low;
-+        };
-+    };
diff --git a/target/linux/generic/backport-5.10/845-v6.0-0002-leds-bcm63138-add-support-for-BCM63138-controller.patch b/target/linux/generic/backport-5.10/845-v6.0-0002-leds-bcm63138-add-support-for-BCM63138-controller.patch
deleted file mode 100644
index 8ebe8f180b3a..000000000000
--- a/target/linux/generic/backport-5.10/845-v6.0-0002-leds-bcm63138-add-support-for-BCM63138-controller.patch
+++ /dev/null
@@ -1,371 +0,0 @@
-From a0ba692072d89075d0a75c7ad9df31f2c1ee9a1c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 27 Dec 2021 15:59:05 +0100
-Subject: [PATCH] leds: bcm63138: add support for BCM63138 controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a new controller first introduced in BCM63138 SoC. Later it was
-also used in BCM4908, some BCM68xx and some BCM63xxx SoCs.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/blink/Kconfig         |  12 ++
- drivers/leds/blink/Makefile        |   1 +
- drivers/leds/blink/leds-bcm63138.c | 308 +++++++++++++++++++++++++++++
- 3 files changed, 321 insertions(+)
- create mode 100644 drivers/leds/blink/leds-bcm63138.c
-
---- /dev/null
-+++ b/drivers/leds/blink/Kconfig
-@@ -0,0 +1,11 @@
-+config LEDS_BCM63138
-+	tristate "LED Support for Broadcom BCM63138 SoC"
-+	depends on LEDS_CLASS
-+	depends on ARCH_BCM4908 || ARCH_BCM_5301X || BCM63XX || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	depends on OF
-+	default ARCH_BCM4908
-+	help
-+	  This option enables support for LED controller that is part of
-+	  BCM63138 SoC. The same hardware block is known to be also used
-+	  in BCM4908, BCM6848, BCM6858, BCM63148, BCM63381 and BCM68360.
---- /dev/null
-+++ b/drivers/leds/blink/Makefile
-@@ -0,0 +1,2 @@
-+# SPDX-License-Identifier: GPL-2.0
-+obj-$(CONFIG_LEDS_BCM63138)	+= leds-bcm63138.o
---- /dev/null
-+++ b/drivers/leds/blink/leds-bcm63138.c
-@@ -0,0 +1,308 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+
-+#define BCM63138_MAX_LEDS				32
-+#define BCM63138_MAX_BRIGHTNESS				9
-+
-+#define BCM63138_LED_BITS				4				/* how many bits control a single LED */
-+#define BCM63138_LED_MASK				((1 << BCM63138_LED_BITS) - 1)	/* 0xf */
-+#define BCM63138_LEDS_PER_REG				(32 / BCM63138_LED_BITS)	/* 8 */
-+
-+#define BCM63138_GLB_CTRL				0x00
-+#define  BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL		0x00000002
-+#define  BCM63138_GLB_CTRL_SERIAL_LED_EN_POL		0x00000008
-+#define BCM63138_MASK					0x04
-+#define BCM63138_HW_LED_EN				0x08
-+#define BCM63138_SERIAL_LED_SHIFT_SEL			0x0c
-+#define BCM63138_FLASH_RATE_CTRL1			0x10
-+#define BCM63138_FLASH_RATE_CTRL2			0x14
-+#define BCM63138_FLASH_RATE_CTRL3			0x18
-+#define BCM63138_FLASH_RATE_CTRL4			0x1c
-+#define BCM63138_BRIGHT_CTRL1				0x20
-+#define BCM63138_BRIGHT_CTRL2				0x24
-+#define BCM63138_BRIGHT_CTRL3				0x28
-+#define BCM63138_BRIGHT_CTRL4				0x2c
-+#define BCM63138_POWER_LED_CFG				0x30
-+#define BCM63138_HW_POLARITY				0xb4
-+#define BCM63138_SW_DATA				0xb8
-+#define BCM63138_SW_POLARITY				0xbc
-+#define BCM63138_PARALLEL_LED_POLARITY			0xc0
-+#define BCM63138_SERIAL_LED_POLARITY			0xc4
-+#define BCM63138_HW_LED_STATUS				0xc8
-+#define BCM63138_FLASH_CTRL_STATUS			0xcc
-+#define BCM63138_FLASH_BRT_CTRL				0xd0
-+#define BCM63138_FLASH_P_LED_OUT_STATUS			0xd4
-+#define BCM63138_FLASH_S_LED_OUT_STATUS			0xd8
-+
-+struct bcm63138_leds {
-+	struct device *dev;
-+	void __iomem *base;
-+	spinlock_t lock;
-+};
-+
-+struct bcm63138_led {
-+	struct bcm63138_leds *leds;
-+	struct led_classdev cdev;
-+	u32 pin;
-+	bool active_low;
-+};
-+
-+/*
-+ * I/O access
-+ */
-+
-+static void bcm63138_leds_write(struct bcm63138_leds *leds, unsigned int reg,
-+				u32 data)
-+{
-+	writel(data, leds->base + reg);
-+}
-+
-+static unsigned long bcm63138_leds_read(struct bcm63138_leds *leds,
-+					unsigned int reg)
-+{
-+	return readl(leds->base + reg);
-+}
-+
-+static void bcm63138_leds_update_bits(struct bcm63138_leds *leds,
-+				      unsigned int reg, u32 mask, u32 val)
-+{
-+	WARN_ON(val & ~mask);
-+
-+	bcm63138_leds_write(leds, reg, (bcm63138_leds_read(leds, reg) & ~mask) | (val & mask));
-+}
-+
-+/*
-+ * Helpers
-+ */
-+
-+static void bcm63138_leds_set_flash_rate(struct bcm63138_leds *leds,
-+					 struct bcm63138_led *led,
-+					 u8 value)
-+{
-+	int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
-+	int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
-+
-+	bcm63138_leds_update_bits(leds, BCM63138_FLASH_RATE_CTRL1 + reg_offset,
-+				  BCM63138_LED_MASK << shift, value << shift);
-+}
-+
-+static void bcm63138_leds_set_bright(struct bcm63138_leds *leds,
-+				     struct bcm63138_led *led,
-+				     u8 value)
-+{
-+	int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
-+	int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
-+
-+	bcm63138_leds_update_bits(leds, BCM63138_BRIGHT_CTRL1 + reg_offset,
-+				  BCM63138_LED_MASK << shift, value << shift);
-+}
-+
-+static void bcm63138_leds_enable_led(struct bcm63138_leds *leds,
-+				     struct bcm63138_led *led,
-+				     enum led_brightness value)
-+{
-+	u32 bit = BIT(led->pin);
-+
-+	bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit,
-+				  value == LED_OFF ? 0 : bit);
-+}
-+
-+/*
-+ * API callbacks
-+ */
-+
-+static void bcm63138_leds_brightness_set(struct led_classdev *led_cdev,
-+					 enum led_brightness value)
-+{
-+	struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
-+	struct bcm63138_leds *leds = led->leds;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&leds->lock, flags);
-+
-+	bcm63138_leds_enable_led(leds, led, value);
-+	if (!value)
-+		bcm63138_leds_set_flash_rate(leds, led, 0);
-+	else
-+		bcm63138_leds_set_bright(leds, led, value);
-+
-+	spin_unlock_irqrestore(&leds->lock, flags);
-+}
-+
-+static int bcm63138_leds_blink_set(struct led_classdev *led_cdev,
-+				   unsigned long *delay_on,
-+				   unsigned long *delay_off)
-+{
-+	struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
-+	struct bcm63138_leds *leds = led->leds;
-+	unsigned long flags;
-+	u8 value;
-+
-+	if (!*delay_on && !*delay_off) {
-+		*delay_on = 640;
-+		*delay_off = 640;
-+	}
-+
-+	if (*delay_on != *delay_off) {
-+		dev_dbg(led_cdev->dev, "Blinking at unequal delays is not supported\n");
-+		return -EINVAL;
-+	}
-+
-+	switch (*delay_on) {
-+	case 1152 ... 1408: /* 1280 ms ± 10% */
-+		value = 0x7;
-+		break;
-+	case 576 ... 704: /* 640 ms ± 10% */
-+		value = 0x6;
-+		break;
-+	case 288 ... 352: /* 320 ms ± 10% */
-+		value = 0x5;
-+		break;
-+	case 126 ... 154: /* 140 ms ± 10% */
-+		value = 0x4;
-+		break;
-+	case 59 ... 72: /* 65 ms ± 10% */
-+		value = 0x3;
-+		break;
-+	default:
-+		dev_dbg(led_cdev->dev, "Blinking delay value %lu is unsupported\n",
-+			*delay_on);
-+		return -EINVAL;
-+	}
-+
-+	spin_lock_irqsave(&leds->lock, flags);
-+
-+	bcm63138_leds_enable_led(leds, led, BCM63138_MAX_BRIGHTNESS);
-+	bcm63138_leds_set_flash_rate(leds, led, value);
-+
-+	spin_unlock_irqrestore(&leds->lock, flags);
-+
-+	return 0;
-+}
-+
-+/*
-+ * LED driver
-+ */
-+
-+static void bcm63138_leds_create_led(struct bcm63138_leds *leds,
-+				     struct device_node *np)
-+{
-+	struct led_init_data init_data = {
-+		.fwnode = of_fwnode_handle(np),
-+	};
-+	struct device *dev = leds->dev;
-+	struct bcm63138_led *led;
-+	struct pinctrl *pinctrl;
-+	u32 bit;
-+	int err;
-+
-+	led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
-+	if (!led) {
-+		dev_err(dev, "Failed to alloc LED\n");
-+		return;
-+	}
-+
-+	led->leds = leds;
-+
-+	if (of_property_read_u32(np, "reg", &led->pin)) {
-+		dev_err(dev, "Missing \"reg\" property in %pOF\n", np);
-+		goto err_free;
-+	}
-+
-+	if (led->pin >= BCM63138_MAX_LEDS) {
-+		dev_err(dev, "Invalid \"reg\" value %d\n", led->pin);
-+		goto err_free;
-+	}
-+
-+	led->active_low = of_property_read_bool(np, "active-low");
-+
-+	led->cdev.max_brightness = BCM63138_MAX_BRIGHTNESS;
-+	led->cdev.brightness_set = bcm63138_leds_brightness_set;
-+	led->cdev.blink_set = bcm63138_leds_blink_set;
-+
-+	err = devm_led_classdev_register_ext(dev, &led->cdev, &init_data);
-+	if (err) {
-+		dev_err(dev, "Failed to register LED %pOF: %d\n", np, err);
-+		goto err_free;
-+	}
-+
-+	pinctrl = devm_pinctrl_get_select_default(led->cdev.dev);
-+	if (IS_ERR(pinctrl) && PTR_ERR(pinctrl) != -ENODEV) {
-+		dev_warn(led->cdev.dev, "Failed to select %pOF pinctrl: %ld\n",
-+			 np, PTR_ERR(pinctrl));
-+	}
-+
-+	bit = BIT(led->pin);
-+	bcm63138_leds_update_bits(leds, BCM63138_PARALLEL_LED_POLARITY, bit,
-+				  led->active_low ? 0 : bit);
-+	bcm63138_leds_update_bits(leds, BCM63138_HW_LED_EN, bit, 0);
-+	bcm63138_leds_set_flash_rate(leds, led, 0);
-+	bcm63138_leds_enable_led(leds, led, led->cdev.brightness);
-+
-+	return;
-+
-+err_free:
-+	devm_kfree(dev, led);
-+}
-+
-+static int bcm63138_leds_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = dev_of_node(&pdev->dev);
-+	struct device *dev = &pdev->dev;
-+	struct bcm63138_leds *leds;
-+	struct device_node *child;
-+
-+	leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
-+	if (!leds)
-+		return -ENOMEM;
-+
-+	leds->dev = dev;
-+
-+	leds->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(leds->base))
-+		return PTR_ERR(leds->base);
-+
-+	spin_lock_init(&leds->lock);
-+
-+	bcm63138_leds_write(leds, BCM63138_GLB_CTRL,
-+			    BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL |
-+			    BCM63138_GLB_CTRL_SERIAL_LED_EN_POL);
-+	bcm63138_leds_write(leds, BCM63138_HW_LED_EN, 0);
-+	bcm63138_leds_write(leds, BCM63138_SERIAL_LED_POLARITY, 0);
-+	bcm63138_leds_write(leds, BCM63138_PARALLEL_LED_POLARITY, 0);
-+
-+	for_each_available_child_of_node(np, child) {
-+		bcm63138_leds_create_led(leds, child);
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm63138_leds_of_match_table[] = {
-+	{ .compatible = "brcm,bcm63138-leds", },
-+	{ },
-+};
-+
-+static struct platform_driver bcm63138_leds_driver = {
-+	.probe = bcm63138_leds_probe,
-+	.driver = {
-+		.name = "leds-bcm63xxx",
-+		.of_match_table = bcm63138_leds_of_match_table,
-+	},
-+};
-+
-+module_platform_driver(bcm63138_leds_driver);
-+
-+MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_LICENSE("GPL");
-+MODULE_DEVICE_TABLE(of, bcm63138_leds_of_match_table);
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -929,6 +929,8 @@ config LEDS_ACER_A500
- 	  This option enables support for the Power Button LED of
- 	  Acer Iconia Tab A500.
- 
-+source "drivers/leds/blink/Kconfig"
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
- 
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -105,3 +105,6 @@ obj-$(CONFIG_LEDS_USER)			+= uleds.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGERS)		+= trigger/
-+
-+# LED Blink
-+obj-y					+= blink/
diff --git a/target/linux/generic/backport-5.10/846-v6.0-0001-dt-bindings-leds-leds-bcm63138-unify-full-stops-in-d.patch b/target/linux/generic/backport-5.10/846-v6.0-0001-dt-bindings-leds-leds-bcm63138-unify-full-stops-in-d.patch
deleted file mode 100644
index 483826abed5f..000000000000
--- a/target/linux/generic/backport-5.10/846-v6.0-0001-dt-bindings-leds-leds-bcm63138-unify-full-stops-in-d.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 13b64a0c19059b38150c79d65d350ae44034c5df Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 17 Jul 2022 14:42:46 +0200
-Subject: [PATCH] dt-bindings: leds: leds-bcm63138: unify full stops in
- descriptions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Description of "reg" doesn't have full stop at the end. It makes sense
-as it's a one-sentence only. Use the same style for "active-low".
-
-Reported-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- Documentation/devicetree/bindings/leds/leds-bcm63138.yaml | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-@@ -54,7 +54,7 @@ patternProperties:
- 
-       active-low:
-         type: boolean
--        description: Makes LED active low.
-+        description: Makes LED active low
- 
-     required:
-       - reg
diff --git a/target/linux/generic/backport-5.10/846-v6.0-0002-leds-add-help-info-about-BCM63138-module-name.patch b/target/linux/generic/backport-5.10/846-v6.0-0002-leds-add-help-info-about-BCM63138-module-name.patch
deleted file mode 100644
index 44e8be86fd3b..000000000000
--- a/target/linux/generic/backport-5.10/846-v6.0-0002-leds-add-help-info-about-BCM63138-module-name.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From bcc607cdbb1f931111196699426f0cb83bfb296a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 17 Jul 2022 14:42:47 +0200
-Subject: [PATCH] leds: add help info about BCM63138 module name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's what we do for all other LEDs drivers.
-
-Reported-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/blink/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/leds/blink/Kconfig
-+++ b/drivers/leds/blink/Kconfig
-@@ -9,3 +9,5 @@ config LEDS_BCM63138
- 	  This option enables support for LED controller that is part of
- 	  BCM63138 SoC. The same hardware block is known to be also used
- 	  in BCM4908, BCM6848, BCM6858, BCM63148, BCM63381 and BCM68360.
-+
-+	  If compiled as module it will be called leds-bcm63138.
diff --git a/target/linux/generic/backport-5.10/846-v6.0-0003-leds-leds-bcm63138-get-rid-of-LED_OFF.patch b/target/linux/generic/backport-5.10/846-v6.0-0003-leds-leds-bcm63138-get-rid-of-LED_OFF.patch
deleted file mode 100644
index e125a54613b2..000000000000
--- a/target/linux/generic/backport-5.10/846-v6.0-0003-leds-leds-bcm63138-get-rid-of-LED_OFF.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 92cfc71ee2ddfb499ed53e21b28bdf8739bc70bc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 17 Jul 2022 14:42:48 +0200
-Subject: [PATCH] leds: leds-bcm63138: get rid of LED_OFF
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The whole "enum led_brightness" is marked as obsolete. Replace it with a
-(non-)zero check.
-
-Reported-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/blink/leds-bcm63138.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/leds/blink/leds-bcm63138.c
-+++ b/drivers/leds/blink/leds-bcm63138.c
-@@ -113,8 +113,7 @@ static void bcm63138_leds_enable_led(str
- {
- 	u32 bit = BIT(led->pin);
- 
--	bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit,
--				  value == LED_OFF ? 0 : bit);
-+	bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit, value ? bit : 0);
- }
- 
- /*
diff --git a/target/linux/generic/backport-5.10/850-v5.17-0001-PCI-pci-bridge-emul-Add-description-for-class_revisi.patch b/target/linux/generic/backport-5.10/850-v5.17-0001-PCI-pci-bridge-emul-Add-description-for-class_revisi.patch
deleted file mode 100644
index 19a4be2a9d74..000000000000
--- a/target/linux/generic/backport-5.10/850-v5.17-0001-PCI-pci-bridge-emul-Add-description-for-class_revisi.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 9319230ac147067652b58fe849ffe0ceec098665 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Tue, 30 Nov 2021 18:29:03 +0100
-Subject: [PATCH] PCI: pci-bridge-emul: Add description for class_revision
- field
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The current assignment to the class_revision member
-
-  class_revision |= cpu_to_le32(PCI_CLASS_BRIDGE_PCI << 16);
-
-can make the reader think that class is at high 16 bits of the member and
-revision at low 16 bits.
-
-In reality, class is at high 24 bits, but the class for PCI Bridge Normal
-Decode is PCI_CLASS_BRIDGE_PCI << 8.
-
-Change the assignment and add a comment to make this clearer.
-
-Link: https://lore.kernel.org/r/20211130172913.9727-2-kabel@kernel.org
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
----
- drivers/pci/pci-bridge-emul.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/pci-bridge-emul.c
-+++ b/drivers/pci/pci-bridge-emul.c
-@@ -284,7 +284,11 @@ int pci_bridge_emul_init(struct pci_brid
- {
- 	BUILD_BUG_ON(sizeof(bridge->conf) != PCI_BRIDGE_CONF_END);
- 
--	bridge->conf.class_revision |= cpu_to_le32(PCI_CLASS_BRIDGE_PCI << 16);
-+	/*
-+	 * class_revision: Class is high 24 bits and revision is low 8 bit of this member,
-+	 * while class for PCI Bridge Normal Decode has the 24-bit value: PCI_CLASS_BRIDGE_PCI << 8
-+	 */
-+	bridge->conf.class_revision |= cpu_to_le32((PCI_CLASS_BRIDGE_PCI << 8) << 8);
- 	bridge->conf.header_type = PCI_HEADER_TYPE_BRIDGE;
- 	bridge->conf.cache_line_size = 0x10;
- 	bridge->conf.status = cpu_to_le16(PCI_STATUS_CAP_LIST);
diff --git a/target/linux/generic/backport-5.10/850-v5.17-0002-PCI-pci-bridge-emul-Add-definitions-for-missing-capa.patch b/target/linux/generic/backport-5.10/850-v5.17-0002-PCI-pci-bridge-emul-Add-definitions-for-missing-capa.patch
deleted file mode 100644
index 3dd82710e647..000000000000
--- a/target/linux/generic/backport-5.10/850-v5.17-0002-PCI-pci-bridge-emul-Add-definitions-for-missing-capa.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 8ea673a8b30b4a32516b8adabb15e2a68ff02ec8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Tue, 30 Nov 2021 18:29:04 +0100
-Subject: [PATCH] PCI: pci-bridge-emul: Add definitions for missing
- capabilities registers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-pci-bridge-emul driver already allocates buffer for capabilities up to the
-PCI_EXP_SLTSTA2 register, but does not define bit access behavior for these
-registers. Add these missing definitions.
-
-Link: https://lore.kernel.org/r/20211130172913.9727-3-kabel@kernel.org
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
----
- drivers/pci/pci-bridge-emul.c | 43 +++++++++++++++++++++++++++++++++++
- 1 file changed, 43 insertions(+)
-
---- a/drivers/pci/pci-bridge-emul.c
-+++ b/drivers/pci/pci-bridge-emul.c
-@@ -270,6 +270,49 @@ struct pci_bridge_reg_behavior pcie_cap_
- 		.ro = GENMASK(15, 0) | PCI_EXP_RTSTA_PENDING,
- 		.w1c = PCI_EXP_RTSTA_PME,
- 	},
-+
-+	[PCI_EXP_DEVCAP2 / 4] = {
-+		/*
-+		 * Device capabilities 2 register has reserved bits [30:27].
-+		 * Also bits [26:24] are reserved for non-upstream ports.
-+		 */
-+		.ro = BIT(31) | GENMASK(23, 0),
-+	},
-+
-+	[PCI_EXP_DEVCTL2 / 4] = {
-+		/*
-+		 * Device control 2 register is RW. Bit 11 is reserved for
-+		 * non-upstream ports.
-+		 *
-+		 * Device status 2 register is reserved.
-+		 */
-+		.rw = GENMASK(15, 12) | GENMASK(10, 0),
-+	},
-+
-+	[PCI_EXP_LNKCAP2 / 4] = {
-+		/* Link capabilities 2 register has reserved bits [30:25] and 0. */
-+		.ro = BIT(31) | GENMASK(24, 1),
-+	},
-+
-+	[PCI_EXP_LNKCTL2 / 4] = {
-+		/*
-+		 * Link control 2 register is RW.
-+		 *
-+		 * Link status 2 register has bits 5, 15 W1C;
-+		 * bits 10, 11 reserved and others are RO.
-+		 */
-+		.rw = GENMASK(15, 0),
-+		.w1c = (BIT(15) | BIT(5)) << 16,
-+		.ro = (GENMASK(14, 12) | GENMASK(9, 6) | GENMASK(4, 0)) << 16,
-+	},
-+
-+	[PCI_EXP_SLTCAP2 / 4] = {
-+		/* Slot capabilities 2 register is reserved. */
-+	},
-+
-+	[PCI_EXP_SLTCTL2 / 4] = {
-+		/* Both Slot control 2 and Slot status 2 registers are reserved. */
-+	},
- };
- 
- /*
diff --git a/target/linux/generic/backport-5.10/850-v5.17-0003-PCI-aardvark-Add-support-for-DEVCAP2-DEVCTL2-LNKCAP2.patch b/target/linux/generic/backport-5.10/850-v5.17-0003-PCI-aardvark-Add-support-for-DEVCAP2-DEVCTL2-LNKCAP2.patch
deleted file mode 100644
index 4d1135bf6c45..000000000000
--- a/target/linux/generic/backport-5.10/850-v5.17-0003-PCI-aardvark-Add-support-for-DEVCAP2-DEVCTL2-LNKCAP2.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 1d3e170344dff2cef8827db6c09909b78cbc11d7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Tue, 30 Nov 2021 18:29:05 +0100
-Subject: [PATCH] PCI: aardvark: Add support for DEVCAP2, DEVCTL2, LNKCAP2 and
- LNKCTL2 registers on emulated bridge
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-PCI aardvark hardware supports access to DEVCAP2, DEVCTL2, LNKCAP2 and
-LNKCTL2 configuration registers of PCIe core via PCIE_CORE_PCIEXP_CAP.
-Export them via emulated software root bridge.
-
-Link: https://lore.kernel.org/r/20211130172913.9727-4-kabel@kernel.org
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
----
- drivers/pci/controller/pci-aardvark.c | 15 +++++++++++----
- 1 file changed, 11 insertions(+), 4 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -885,8 +885,13 @@ advk_pci_bridge_emul_pcie_conf_read(stru
- 
- 	case PCI_EXP_DEVCAP:
- 	case PCI_EXP_DEVCTL:
-+	case PCI_EXP_DEVCAP2:
-+	case PCI_EXP_DEVCTL2:
-+	case PCI_EXP_LNKCAP2:
-+	case PCI_EXP_LNKCTL2:
- 		*value = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
- 		return PCI_BRIDGE_EMUL_HANDLED;
-+
- 	default:
- 		return PCI_BRIDGE_EMUL_NOT_HANDLED;
- 	}
-@@ -900,10 +905,6 @@ advk_pci_bridge_emul_pcie_conf_write(str
- 	struct advk_pcie *pcie = bridge->data;
- 
- 	switch (reg) {
--	case PCI_EXP_DEVCTL:
--		advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg);
--		break;
--
- 	case PCI_EXP_LNKCTL:
- 		advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg);
- 		if (new & PCI_EXP_LNKCTL_RL)
-@@ -925,6 +926,12 @@ advk_pci_bridge_emul_pcie_conf_write(str
- 		advk_writel(pcie, new, PCIE_ISR0_REG);
- 		break;
- 
-+	case PCI_EXP_DEVCTL:
-+	case PCI_EXP_DEVCTL2:
-+	case PCI_EXP_LNKCTL2:
-+		advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg);
-+		break;
-+
- 	default:
- 		break;
- 	}
diff --git a/target/linux/generic/backport-5.10/850-v5.17-0005-PCI-aardvark-Comment-actions-in-driver-remove-method.patch b/target/linux/generic/backport-5.10/850-v5.17-0005-PCI-aardvark-Comment-actions-in-driver-remove-method.patch
deleted file mode 100644
index b724422d4072..000000000000
--- a/target/linux/generic/backport-5.10/850-v5.17-0005-PCI-aardvark-Comment-actions-in-driver-remove-method.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From a4ca7948e1d47275f8f3e5023243440c40561916 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Tue, 30 Nov 2021 18:29:07 +0100
-Subject: [PATCH] PCI: aardvark: Comment actions in driver remove method
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add two more comments into the advk_pcie_remove() method.
-
-Link: https://lore.kernel.org/r/20211130172913.9727-6-kabel@kernel.org
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
----
- drivers/pci/controller/pci-aardvark.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1692,11 +1692,13 @@ static int advk_pcie_remove(struct platf
- 	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
- 	int i;
- 
-+	/* Remove PCI bus with all devices */
- 	pci_lock_rescan_remove();
- 	pci_stop_root_bus(bridge->bus);
- 	pci_remove_root_bus(bridge->bus);
- 	pci_unlock_rescan_remove();
- 
-+	/* Remove IRQ domains */
- 	advk_pcie_remove_msi_irq_domain(pcie);
- 	advk_pcie_remove_irq_domain(pcie);
- 
diff --git a/target/linux/generic/backport-5.10/850-v5.17-0006-PCI-aardvark-Disable-bus-mastering-when-unbinding-dr.patch b/target/linux/generic/backport-5.10/850-v5.17-0006-PCI-aardvark-Disable-bus-mastering-when-unbinding-dr.patch
deleted file mode 100644
index c8d5e391b84f..000000000000
--- a/target/linux/generic/backport-5.10/850-v5.17-0006-PCI-aardvark-Disable-bus-mastering-when-unbinding-dr.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From a46f2f6dd4093438d9615dfbf5c0fea2a9835dba Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Tue, 30 Nov 2021 18:29:08 +0100
-Subject: [PATCH] PCI: aardvark: Disable bus mastering when unbinding driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Ensure that after driver unbind PCIe cards are not able to forward
-memory and I/O requests in the upstream direction.
-
-Link: https://lore.kernel.org/r/20211130172913.9727-7-kabel@kernel.org
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
----
- drivers/pci/controller/pci-aardvark.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1690,6 +1690,7 @@ static int advk_pcie_remove(struct platf
- {
- 	struct advk_pcie *pcie = platform_get_drvdata(pdev);
- 	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
-+	u32 val;
- 	int i;
- 
- 	/* Remove PCI bus with all devices */
-@@ -1698,6 +1699,11 @@ static int advk_pcie_remove(struct platf
- 	pci_remove_root_bus(bridge->bus);
- 	pci_unlock_rescan_remove();
- 
-+	/* Disable Root Bridge I/O space, memory space and bus mastering */
-+	val = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
-+	val &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-+	advk_writel(pcie, val, PCIE_CORE_CMD_STATUS_REG);
-+
- 	/* Remove IRQ domains */
- 	advk_pcie_remove_msi_irq_domain(pcie);
- 	advk_pcie_remove_irq_domain(pcie);
diff --git a/target/linux/generic/backport-5.10/850-v5.17-0007-PCI-aardvark-Mask-all-interrupts-when-unbinding-driv.patch b/target/linux/generic/backport-5.10/850-v5.17-0007-PCI-aardvark-Mask-all-interrupts-when-unbinding-driv.patch
deleted file mode 100644
index 05d350e9226f..000000000000
--- a/target/linux/generic/backport-5.10/850-v5.17-0007-PCI-aardvark-Mask-all-interrupts-when-unbinding-driv.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 13bcdf07cb2ecff5d45d2c141df2539b15211448 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Tue, 30 Nov 2021 18:29:09 +0100
-Subject: [PATCH] PCI: aardvark: Mask all interrupts when unbinding driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Ensure that no interrupt can be triggered after driver unbind.
-
-Link: https://lore.kernel.org/r/20211130172913.9727-8-kabel@kernel.org
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
----
- drivers/pci/controller/pci-aardvark.c | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1704,6 +1704,27 @@ static int advk_pcie_remove(struct platf
- 	val &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
- 	advk_writel(pcie, val, PCIE_CORE_CMD_STATUS_REG);
- 
-+	/* Disable MSI */
-+	val = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
-+	val &= ~PCIE_CORE_CTRL2_MSI_ENABLE;
-+	advk_writel(pcie, val, PCIE_CORE_CTRL2_REG);
-+
-+	/* Clear MSI address */
-+	advk_writel(pcie, 0, PCIE_MSI_ADDR_LOW_REG);
-+	advk_writel(pcie, 0, PCIE_MSI_ADDR_HIGH_REG);
-+
-+	/* Mask all interrupts */
-+	advk_writel(pcie, PCIE_MSI_ALL_MASK, PCIE_MSI_MASK_REG);
-+	advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_MASK_REG);
-+	advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG);
-+	advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_MASK_REG);
-+
-+	/* Clear all interrupts */
-+	advk_writel(pcie, PCIE_MSI_ALL_MASK, PCIE_MSI_STATUS_REG);
-+	advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_REG);
-+	advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG);
-+	advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG);
-+
- 	/* Remove IRQ domains */
- 	advk_pcie_remove_msi_irq_domain(pcie);
- 	advk_pcie_remove_irq_domain(pcie);
diff --git a/target/linux/generic/backport-5.10/850-v5.17-0008-PCI-aardvark-Fix-memory-leak-in-driver-unbind.patch b/target/linux/generic/backport-5.10/850-v5.17-0008-PCI-aardvark-Fix-memory-leak-in-driver-unbind.patch
deleted file mode 100644
index 435acda1e247..000000000000
--- a/target/linux/generic/backport-5.10/850-v5.17-0008-PCI-aardvark-Fix-memory-leak-in-driver-unbind.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 2f040a17f5061457ae95035326d3159eddc1e5cc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Tue, 30 Nov 2021 18:29:10 +0100
-Subject: [PATCH] PCI: aardvark: Fix memory leak in driver unbind
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Free config space for emulated root bridge when unbinding driver to fix
-memory leak. Do it after disabling and masking all interrupts, since
-aardvark interrupt handler accesses config space of emulated root
-bridge.
-
-Link: https://lore.kernel.org/r/20211130172913.9727-9-kabel@kernel.org
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
----
- drivers/pci/controller/pci-aardvark.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1729,6 +1729,9 @@ static int advk_pcie_remove(struct platf
- 	advk_pcie_remove_msi_irq_domain(pcie);
- 	advk_pcie_remove_irq_domain(pcie);
- 
-+	/* Free config space for emulated root bridge */
-+	pci_bridge_emul_cleanup(&pcie->bridge);
-+
- 	/* Disable outbound address windows mapping */
- 	for (i = 0; i < OB_WIN_COUNT; i++)
- 		advk_pcie_disable_ob_win(pcie, i);
diff --git a/target/linux/generic/backport-5.10/850-v5.17-0009-PCI-aardvark-Assert-PERST-when-unbinding-driver.patch b/target/linux/generic/backport-5.10/850-v5.17-0009-PCI-aardvark-Assert-PERST-when-unbinding-driver.patch
deleted file mode 100644
index c5dfdd3923a2..000000000000
--- a/target/linux/generic/backport-5.10/850-v5.17-0009-PCI-aardvark-Assert-PERST-when-unbinding-driver.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 1f54391be8ce0c981d312cb93acdc5608def576a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Tue, 30 Nov 2021 18:29:11 +0100
-Subject: [PATCH] PCI: aardvark: Assert PERST# when unbinding driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Put the PCIe card into reset by asserting PERST# signal when unbinding
-driver. It doesn't make sense to leave the card working if it can't
-communicate with the host. This should also save some power.
-
-Link: https://lore.kernel.org/r/20211130172913.9727-10-kabel@kernel.org
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
----
- drivers/pci/controller/pci-aardvark.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1732,6 +1732,10 @@ static int advk_pcie_remove(struct platf
- 	/* Free config space for emulated root bridge */
- 	pci_bridge_emul_cleanup(&pcie->bridge);
- 
-+	/* Assert PERST# signal which prepares PCIe card for power down */
-+	if (pcie->reset_gpio)
-+		gpiod_set_value_cansleep(pcie->reset_gpio, 1);
-+
- 	/* Disable outbound address windows mapping */
- 	for (i = 0; i < OB_WIN_COUNT; i++)
- 		advk_pcie_disable_ob_win(pcie, i);
diff --git a/target/linux/generic/backport-5.10/850-v5.17-0010-PCI-aardvark-Disable-link-training-when-unbinding-dr.patch b/target/linux/generic/backport-5.10/850-v5.17-0010-PCI-aardvark-Disable-link-training-when-unbinding-dr.patch
deleted file mode 100644
index 7f4e2575f528..000000000000
--- a/target/linux/generic/backport-5.10/850-v5.17-0010-PCI-aardvark-Disable-link-training-when-unbinding-dr.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 759dec2e3dfdbd261c41d2279f04f2351c971a49 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Tue, 30 Nov 2021 18:29:12 +0100
-Subject: [PATCH] PCI: aardvark: Disable link training when unbinding driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Disable link training circuit in driver unbind sequence. We want to
-leave link training in the same state as it was before the driver was
-probed.
-
-Link: https://lore.kernel.org/r/20211130172913.9727-11-kabel@kernel.org
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
----
- drivers/pci/controller/pci-aardvark.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1736,6 +1736,11 @@ static int advk_pcie_remove(struct platf
- 	if (pcie->reset_gpio)
- 		gpiod_set_value_cansleep(pcie->reset_gpio, 1);
- 
-+	/* Disable link training */
-+	val = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-+	val &= ~LINK_TRAINING_EN;
-+	advk_writel(pcie, val, PCIE_CORE_CTRL0_REG);
-+
- 	/* Disable outbound address windows mapping */
- 	for (i = 0; i < OB_WIN_COUNT; i++)
- 		advk_pcie_disable_ob_win(pcie, i);
diff --git a/target/linux/generic/backport-5.10/850-v5.17-0011-PCI-aardvark-Disable-common-PHY-when-unbinding-drive.patch b/target/linux/generic/backport-5.10/850-v5.17-0011-PCI-aardvark-Disable-common-PHY-when-unbinding-drive.patch
deleted file mode 100644
index 495c34aa9e63..000000000000
--- a/target/linux/generic/backport-5.10/850-v5.17-0011-PCI-aardvark-Disable-common-PHY-when-unbinding-drive.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From fdbbe242c15a8f2cd0e3ad8a56cd0a447b771d0d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Tue, 30 Nov 2021 18:29:13 +0100
-Subject: [PATCH] PCI: aardvark: Disable common PHY when unbinding driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Disable the PCIe PHY when unbinding driver. This should save some power.
-
-Link: https://lore.kernel.org/r/20211130172913.9727-12-kabel@kernel.org
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
----
- drivers/pci/controller/pci-aardvark.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1745,6 +1745,9 @@ static int advk_pcie_remove(struct platf
- 	for (i = 0; i < OB_WIN_COUNT; i++)
- 		advk_pcie_disable_ob_win(pcie, i);
- 
-+	/* Disable phy */
-+	advk_pcie_disable_phy(pcie);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/backport-5.10/851-v5.15-0001-phy-marvell-phy-mvebu-a3700-comphy-Rename-HS-SGMMI-t.patch b/target/linux/generic/backport-5.10/851-v5.15-0001-phy-marvell-phy-mvebu-a3700-comphy-Rename-HS-SGMMI-t.patch
deleted file mode 100644
index 4f867724ac23..000000000000
--- a/target/linux/generic/backport-5.10/851-v5.15-0001-phy-marvell-phy-mvebu-a3700-comphy-Rename-HS-SGMMI-t.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 40da06da15c1718b02072687bbfb2d08f5eb9399 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Fri, 27 Aug 2021 11:27:52 +0200
-Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Rename HS-SGMMI to
- 2500Base-X
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Comphy phy mode 0x3 is incorrectly named. It is not SGMII but rather
-2500Base-X mode which runs at 3.125 Gbps speed.
-
-Rename macro names and comments to 2500Base-X.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Fixes: 9695375a3f4a ("phy: add A3700 COMPHY support")
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-@@ -29,7 +29,7 @@
- 
- #define COMPHY_FW_MODE_SATA			0x1
- #define COMPHY_FW_MODE_SGMII			0x2
--#define COMPHY_FW_MODE_HS_SGMII			0x3
-+#define COMPHY_FW_MODE_2500BASEX		0x3
- #define COMPHY_FW_MODE_USB3H			0x4
- #define COMPHY_FW_MODE_USB3D			0x5
- #define COMPHY_FW_MODE_PCIE			0x6
-@@ -40,7 +40,7 @@
- 
- #define COMPHY_FW_SPEED_1_25G			0 /* SGMII 1G */
- #define COMPHY_FW_SPEED_2_5G			1
--#define COMPHY_FW_SPEED_3_125G			2 /* SGMII 2.5G */
-+#define COMPHY_FW_SPEED_3_125G			2 /* 2500BASE-X */
- #define COMPHY_FW_SPEED_5G			3
- #define COMPHY_FW_SPEED_5_15625G		4 /* XFI 5G */
- #define COMPHY_FW_SPEED_6G			5
-@@ -84,14 +84,14 @@ static const struct mvebu_a3700_comphy_c
- 	MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, 1,
- 				    COMPHY_FW_MODE_SGMII),
- 	MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, 1,
--				    COMPHY_FW_MODE_HS_SGMII),
-+				    COMPHY_FW_MODE_2500BASEX),
- 	/* lane 1 */
- 	MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, 0,
- 				    COMPHY_FW_MODE_PCIE),
- 	MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, 0,
- 				    COMPHY_FW_MODE_SGMII),
- 	MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, 0,
--				    COMPHY_FW_MODE_HS_SGMII),
-+				    COMPHY_FW_MODE_2500BASEX),
- 	/* lane 2 */
- 	MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, 0,
- 				    COMPHY_FW_MODE_SATA),
-@@ -205,7 +205,7 @@ static int mvebu_a3700_comphy_power_on(s
- 						 COMPHY_FW_SPEED_1_25G);
- 			break;
- 		case PHY_INTERFACE_MODE_2500BASEX:
--			dev_dbg(lane->dev, "set lane %d to HS SGMII mode\n",
-+			dev_dbg(lane->dev, "set lane %d to 2500BASEX mode\n",
- 				lane->id);
- 			fw_param = COMPHY_FW_NET(fw_mode, lane->port,
- 						 COMPHY_FW_SPEED_3_125G);
diff --git a/target/linux/generic/backport-5.10/851-v5.15-0002-phy-marvell-phy-mvebu-a3700-comphy-Remove-unsupporte.patch b/target/linux/generic/backport-5.10/851-v5.15-0002-phy-marvell-phy-mvebu-a3700-comphy-Remove-unsupporte.patch
deleted file mode 100644
index 99f56f1c57d9..000000000000
--- a/target/linux/generic/backport-5.10/851-v5.15-0002-phy-marvell-phy-mvebu-a3700-comphy-Remove-unsupporte.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From e1dbe9ecf621b6f71f3d2df3e50731d583f3d27f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Fri, 27 Aug 2021 11:27:53 +0200
-Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Remove unsupported
- modes
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Armada 3700 does not support RXAUI, XFI and neither SFI. Remove unused
-macros for these unsupported modes.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Fixes: 9695375a3f4a ("phy: add A3700 COMPHY support")
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 6 ------
- 1 file changed, 6 deletions(-)
-
---- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-@@ -33,18 +33,12 @@
- #define COMPHY_FW_MODE_USB3H			0x4
- #define COMPHY_FW_MODE_USB3D			0x5
- #define COMPHY_FW_MODE_PCIE			0x6
--#define COMPHY_FW_MODE_RXAUI			0x7
--#define COMPHY_FW_MODE_XFI			0x8
--#define COMPHY_FW_MODE_SFI			0x9
- #define COMPHY_FW_MODE_USB3			0xa
- 
- #define COMPHY_FW_SPEED_1_25G			0 /* SGMII 1G */
- #define COMPHY_FW_SPEED_2_5G			1
- #define COMPHY_FW_SPEED_3_125G			2 /* 2500BASE-X */
- #define COMPHY_FW_SPEED_5G			3
--#define COMPHY_FW_SPEED_5_15625G		4 /* XFI 5G */
--#define COMPHY_FW_SPEED_6G			5
--#define COMPHY_FW_SPEED_10_3125G		6 /* XFI 10G */
- #define COMPHY_FW_SPEED_MAX			0x3F
- 
- #define COMPHY_FW_MODE(mode)			((mode) << 12)
diff --git a/target/linux/generic/backport-5.10/860-v5.17-MIPS-ath79-drop-_machine_restart-again.patch b/target/linux/generic/backport-5.10/860-v5.17-MIPS-ath79-drop-_machine_restart-again.patch
deleted file mode 100644
index 971562a8f7cb..000000000000
--- a/target/linux/generic/backport-5.10/860-v5.17-MIPS-ath79-drop-_machine_restart-again.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From d3115128bdafb62628ab41861a4f06f6d02ac320 Mon Sep 17 00:00:00 2001
-From: Lech Perczak <lech.perczak@gmail.com>
-Date: Mon, 10 Jan 2022 23:48:44 +0100
-Subject: MIPS: ath79: drop _machine_restart again
-
-Commit 81424d0ad0d4 ("MIPS: ath79: Use the reset controller to restart
-OF machines") removed setup of _machine_restart on OF machines to use
-reset handler in reset controller driver.
-While removing remnants of non-OF machines in commit 3a77e0d75eed
-("MIPS: ath79: drop machfiles"), this was introduced again, making it
-impossible to use additional restart handlers registered through device
-tree. Drop setting _machine_restart altogether, and ath79_restart
-function, which is no longer used after this.
-
-Fixes: 3a77e0d75eed ("MIPS: ath79: drop machfiles")
-Cc: John Crispin <john@phrozen.org>
-Cc: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/ath79/setup.c | 10 ----------
- 1 file changed, 10 deletions(-)
-
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -34,15 +34,6 @@
- 
- static char ath79_sys_type[ATH79_SYS_TYPE_LEN];
- 
--static void ath79_restart(char *command)
--{
--	local_irq_disable();
--	ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
--	for (;;)
--		if (cpu_wait)
--			cpu_wait();
--}
--
- static void ath79_halt(void)
- {
- 	while (1)
-@@ -233,7 +224,6 @@ void __init plat_mem_setup(void)
- 
- 	detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
- 
--	_machine_restart = ath79_restart;
- 	_machine_halt = ath79_halt;
- 	pm_power_off = ath79_halt;
- }
diff --git a/target/linux/generic/backport-5.10/870-hwmon-next-hwmon-lm70-Add-ti-tmp125-support.patch b/target/linux/generic/backport-5.10/870-hwmon-next-hwmon-lm70-Add-ti-tmp125-support.patch
deleted file mode 100644
index fabf177628f0..000000000000
--- a/target/linux/generic/backport-5.10/870-hwmon-next-hwmon-lm70-Add-ti-tmp125-support.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 31d8f414e1596ba54a4315418e4c0086fda9e428 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Fri, 18 Feb 2022 10:06:43 +0100
-Subject: hwmon: (lm70) Add ti,tmp125 support
-
-The TMP125 is a 2 degree Celsius accurate Digital
-Temperature Sensor with a SPI interface.
-
-The temperature register is a 16-bit, read-only register.
-The MSB (Bit 15) is a leading zero and never set. Bits 14
-to 5 are the 1+9 temperature data bits in a two's
-complement format. Bits 4 to 0 are useless copies of
-Bit 5 value and therefore ignored.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Link: https://lore.kernel.org/r/43b19cbd4e7f51e9509e561b02b5d8d0e7079fac.1645175187.git.chunkeey@gmail.com
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
----
---- a/drivers/hwmon/lm70.c
-+++ b/drivers/hwmon/lm70.c
-@@ -34,6 +34,7 @@
- #define LM70_CHIP_LM71		2	/* NS LM71 */
- #define LM70_CHIP_LM74		3	/* NS LM74 */
- #define LM70_CHIP_TMP122	4	/* TI TMP122/TMP124 */
-+#define LM70_CHIP_TMP125	5	/* TI TMP125 */
- 
- struct lm70 {
- 	struct spi_device *spi;
-@@ -87,6 +88,12 @@ static ssize_t temp1_input_show(struct d
- 	 * LM71:
- 	 * 14 bits of 2's complement data, discard LSB 2 bits,
- 	 * resolution 0.0312 degrees celsius.
-+	 *
-+	 * TMP125:
-+	 * MSB/D15 is a leading zero. D14 is the sign-bit. This is
-+	 * followed by 9 temperature bits (D13..D5) in 2's complement
-+	 * data format with a resolution of 0.25 degrees celsius per unit.
-+	 * LSB 5 bits (D4..D0) share the same value as D5 and get discarded.
- 	 */
- 	switch (p_lm70->chip) {
- 	case LM70_CHIP_LM70:
-@@ -102,6 +109,10 @@ static ssize_t temp1_input_show(struct d
- 	case LM70_CHIP_LM71:
- 		val = ((int)raw / 4) * 3125 / 100;
- 		break;
-+
-+	case LM70_CHIP_TMP125:
-+		val = (sign_extend32(raw, 14) / 32) * 250;
-+		break;
- 	}
- 
- 	status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */
-@@ -136,6 +147,10 @@ static const struct of_device_id lm70_of
- 		.data = (void *) LM70_CHIP_TMP122,
- 	},
- 	{
-+		.compatible = "ti,tmp125",
-+		.data = (void *) LM70_CHIP_TMP125,
-+	},
-+	{
- 		.compatible = "ti,lm71",
- 		.data = (void *) LM70_CHIP_LM71,
- 	},
-@@ -184,6 +199,7 @@ static const struct spi_device_id lm70_i
- 	{ "lm70",   LM70_CHIP_LM70 },
- 	{ "tmp121", LM70_CHIP_TMP121 },
- 	{ "tmp122", LM70_CHIP_TMP122 },
-+	{ "tmp125", LM70_CHIP_TMP125 },
- 	{ "lm71",   LM70_CHIP_LM71 },
- 	{ "lm74",   LM70_CHIP_LM74 },
- 	{ },
diff --git a/target/linux/generic/backport-5.10/871-v5.12-hwmon-add-Texas-Instruments-TPS23861-driver.patch b/target/linux/generic/backport-5.10/871-v5.12-hwmon-add-Texas-Instruments-TPS23861-driver.patch
deleted file mode 100644
index 8c0329960ce4..000000000000
--- a/target/linux/generic/backport-5.10/871-v5.12-hwmon-add-Texas-Instruments-TPS23861-driver.patch
+++ /dev/null
@@ -1,711 +0,0 @@
-From 97c95dbbba64dbd6e98e033e396695f328033966 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko@sartura.hr>
-Date: Thu, 21 Jan 2021 14:44:33 +0100
-Subject: [PATCH 1/4] hwmon: add Texas Instruments TPS23861 driver
-
-Add basic monitoring support as well as port on/off control for Texas
-Instruments TPS23861 PoE PSE IC.
-
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Link: https://lore.kernel.org/r/20210121134434.2782405-2-robert.marko@sartura.hr
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
----
- Documentation/hwmon/index.rst    |   1 +
- Documentation/hwmon/tps23861.rst |  41 +++
- drivers/hwmon/Kconfig            |  11 +
- drivers/hwmon/Makefile           |   1 +
- drivers/hwmon/tps23861.c         | 601 +++++++++++++++++++++++++++++++
- 5 files changed, 655 insertions(+)
- create mode 100644 Documentation/hwmon/tps23861.rst
- create mode 100644 drivers/hwmon/tps23861.c
-
---- a/Documentation/hwmon/index.rst
-+++ b/Documentation/hwmon/index.rst
-@@ -172,6 +172,7 @@ Hardware Monitoring Kernel Drivers
-    tmp401
-    tmp421
-    tmp513
-+   tps23861
-    tps40422
-    tps53679
-    twl4030-madc-hwmon
---- /dev/null
-+++ b/Documentation/hwmon/tps23861.rst
-@@ -0,0 +1,41 @@
-+.. SPDX-License-Identifier: GPL-2.0-only
-+
-+Kernel driver tps23861
-+======================
-+
-+Supported chips:
-+  * Texas Instruments TPS23861
-+
-+    Prefix: 'tps23861'
-+
-+    Datasheet: https://www.ti.com/lit/gpn/tps23861
-+
-+Author: Robert Marko <robert.marko@sartura.hr>
-+
-+Description
-+-----------
-+
-+This driver supports hardware monitoring for Texas Instruments TPS23861 PoE PSE.
-+
-+TPS23861 is a quad port IEEE802.3at PSE controller with optional I2C control
-+and monitoring capabilities.
-+
-+TPS23861 offers three modes of operation: Auto, Semi-Auto and Manual.
-+
-+This driver only supports the Auto mode of operation providing monitoring
-+as well as enabling/disabling the four ports.
-+
-+Sysfs entries
-+-------------
-+
-+======================= =====================================================================
-+in[0-3]_input		Voltage on ports [1-4]
-+in[0-3]_label		"Port[1-4]"
-+in4_input		IC input voltage
-+in4_label		"Input"
-+temp1_input		IC die temperature
-+temp1_label		"Die"
-+curr[1-4]_input		Current on ports [1-4]
-+in[1-4]_label		"Port[1-4]"
-+in[0-3]_enable		Enable/disable ports [1-4]
-+======================= =====================================================================
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -1103,6 +1103,17 @@ config SENSORS_TC654
- 	  This driver can also be built as a module. If so, the module
- 	  will be called tc654.
- 
-+config SENSORS_TPS23861
-+	tristate "Texas Instruments TPS23861 PoE PSE"
-+	depends on I2C
-+	select REGMAP_I2C
-+	help
-+	  If you say yes here you get support for Texas Instruments
-+	  TPS23861 802.3at PoE PSE chips.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called tps23861.
-+
- config SENSORS_MENF21BMC_HWMON
- 	tristate "MEN 14F021P00 BMC Hardware Monitoring"
- 	depends on MFD_MENF21BMC
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -141,6 +141,7 @@ obj-$(CONFIG_SENSORS_MAX31790)	+= max317
- obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
- obj-$(CONFIG_SENSORS_MCP3021)	+= mcp3021.o
- obj-$(CONFIG_SENSORS_TC654)	+= tc654.o
-+obj-$(CONFIG_SENSORS_TPS23861)	+= tps23861.o
- obj-$(CONFIG_SENSORS_MLXREG_FAN) += mlxreg-fan.o
- obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
- obj-$(CONFIG_SENSORS_MR75203)	+= mr75203.o
---- /dev/null
-+++ b/drivers/hwmon/tps23861.c
-@@ -0,0 +1,601 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (c) 2020 Sartura Ltd.
-+ *
-+ * Driver for the TI TPS23861 PoE PSE.
-+ *
-+ * Author: Robert Marko <robert.marko@sartura.hr>
-+ */
-+
-+#include <linux/bitfield.h>
-+#include <linux/debugfs.h>
-+#include <linux/delay.h>
-+#include <linux/hwmon-sysfs.h>
-+#include <linux/hwmon.h>
-+#include <linux/i2c.h>
-+#include <linux/module.h>
-+#include <linux/of_device.h>
-+#include <linux/regmap.h>
-+
-+#define TEMPERATURE			0x2c
-+#define INPUT_VOLTAGE_LSB		0x2e
-+#define INPUT_VOLTAGE_MSB		0x2f
-+#define PORT_1_CURRENT_LSB		0x30
-+#define PORT_1_CURRENT_MSB		0x31
-+#define PORT_1_VOLTAGE_LSB		0x32
-+#define PORT_1_VOLTAGE_MSB		0x33
-+#define PORT_2_CURRENT_LSB		0x34
-+#define PORT_2_CURRENT_MSB		0x35
-+#define PORT_2_VOLTAGE_LSB		0x36
-+#define PORT_2_VOLTAGE_MSB		0x37
-+#define PORT_3_CURRENT_LSB		0x38
-+#define PORT_3_CURRENT_MSB		0x39
-+#define PORT_3_VOLTAGE_LSB		0x3a
-+#define PORT_3_VOLTAGE_MSB		0x3b
-+#define PORT_4_CURRENT_LSB		0x3c
-+#define PORT_4_CURRENT_MSB		0x3d
-+#define PORT_4_VOLTAGE_LSB		0x3e
-+#define PORT_4_VOLTAGE_MSB		0x3f
-+#define PORT_N_CURRENT_LSB_OFFSET	0x04
-+#define PORT_N_VOLTAGE_LSB_OFFSET	0x04
-+#define VOLTAGE_CURRENT_MASK		GENMASK(13, 0)
-+#define PORT_1_RESISTANCE_LSB		0x60
-+#define PORT_1_RESISTANCE_MSB		0x61
-+#define PORT_2_RESISTANCE_LSB		0x62
-+#define PORT_2_RESISTANCE_MSB		0x63
-+#define PORT_3_RESISTANCE_LSB		0x64
-+#define PORT_3_RESISTANCE_MSB		0x65
-+#define PORT_4_RESISTANCE_LSB		0x66
-+#define PORT_4_RESISTANCE_MSB		0x67
-+#define PORT_N_RESISTANCE_LSB_OFFSET	0x02
-+#define PORT_RESISTANCE_MASK		GENMASK(13, 0)
-+#define PORT_RESISTANCE_RSN_MASK	GENMASK(15, 14)
-+#define PORT_RESISTANCE_RSN_OTHER	0
-+#define PORT_RESISTANCE_RSN_LOW		1
-+#define PORT_RESISTANCE_RSN_OPEN	2
-+#define PORT_RESISTANCE_RSN_SHORT	3
-+#define PORT_1_STATUS			0x0c
-+#define PORT_2_STATUS			0x0d
-+#define PORT_3_STATUS			0x0e
-+#define PORT_4_STATUS			0x0f
-+#define PORT_STATUS_CLASS_MASK		GENMASK(7, 4)
-+#define PORT_STATUS_DETECT_MASK		GENMASK(3, 0)
-+#define PORT_CLASS_UNKNOWN		0
-+#define PORT_CLASS_1			1
-+#define PORT_CLASS_2			2
-+#define PORT_CLASS_3			3
-+#define PORT_CLASS_4			4
-+#define PORT_CLASS_RESERVED		5
-+#define PORT_CLASS_0			6
-+#define PORT_CLASS_OVERCURRENT		7
-+#define PORT_CLASS_MISMATCH		8
-+#define PORT_DETECT_UNKNOWN		0
-+#define PORT_DETECT_SHORT		1
-+#define PORT_DETECT_RESERVED		2
-+#define PORT_DETECT_RESISTANCE_LOW	3
-+#define PORT_DETECT_RESISTANCE_OK	4
-+#define PORT_DETECT_RESISTANCE_HIGH	5
-+#define PORT_DETECT_OPEN_CIRCUIT	6
-+#define PORT_DETECT_RESERVED_2		7
-+#define PORT_DETECT_MOSFET_FAULT	8
-+#define PORT_DETECT_LEGACY		9
-+/* Measurment beyond clamp voltage */
-+#define PORT_DETECT_CAPACITANCE_INVALID_BEYOND	10
-+/* Insufficient voltage delta */
-+#define PORT_DETECT_CAPACITANCE_INVALID_DELTA	11
-+#define PORT_DETECT_CAPACITANCE_OUT_OF_RANGE	12
-+#define POE_PLUS			0x40
-+#define OPERATING_MODE			0x12
-+#define OPERATING_MODE_OFF		0
-+#define OPERATING_MODE_MANUAL		1
-+#define OPERATING_MODE_SEMI		2
-+#define OPERATING_MODE_AUTO		3
-+#define OPERATING_MODE_PORT_1_MASK	GENMASK(1, 0)
-+#define OPERATING_MODE_PORT_2_MASK	GENMASK(3, 2)
-+#define OPERATING_MODE_PORT_3_MASK	GENMASK(5, 4)
-+#define OPERATING_MODE_PORT_4_MASK	GENMASK(7, 6)
-+
-+#define DETECT_CLASS_RESTART		0x18
-+#define POWER_ENABLE			0x19
-+#define TPS23861_NUM_PORTS		4
-+
-+#define TEMPERATURE_LSB			652 /* 0.652 degrees Celsius */
-+#define VOLTAGE_LSB			3662 /* 3.662 mV */
-+#define SHUNT_RESISTOR_DEFAULT		255000 /* 255 mOhm */
-+#define CURRENT_LSB_255			62260 /* 62.260 uA */
-+#define CURRENT_LSB_250			61039 /* 61.039 uA */
-+#define RESISTANCE_LSB			110966 /* 11.0966 Ohm*/
-+#define RESISTANCE_LSB_LOW		157216 /* 15.7216 Ohm*/
-+
-+struct tps23861_data {
-+	struct regmap *regmap;
-+	u32 shunt_resistor;
-+	struct i2c_client *client;
-+	struct dentry *debugfs_dir;
-+};
-+
-+static struct regmap_config tps23861_regmap_config = {
-+	.reg_bits = 8,
-+	.val_bits = 8,
-+};
-+
-+static int tps23861_read_temp(struct tps23861_data *data, long *val)
-+{
-+	unsigned int regval;
-+	int err;
-+
-+	err = regmap_read(data->regmap, TEMPERATURE, &regval);
-+	if (err < 0)
-+		return err;
-+
-+	*val = (regval * TEMPERATURE_LSB) - 20000;
-+
-+	return 0;
-+}
-+
-+static int tps23861_read_voltage(struct tps23861_data *data, int channel,
-+				 long *val)
-+{
-+	unsigned int regval;
-+	int err;
-+
-+	if (channel < TPS23861_NUM_PORTS) {
-+		err = regmap_bulk_read(data->regmap,
-+				       PORT_1_VOLTAGE_LSB + channel * PORT_N_VOLTAGE_LSB_OFFSET,
-+				       &regval, 2);
-+	} else {
-+		err = regmap_bulk_read(data->regmap,
-+				       INPUT_VOLTAGE_LSB,
-+				       &regval, 2);
-+	}
-+	if (err < 0)
-+		return err;
-+
-+	*val = (FIELD_GET(VOLTAGE_CURRENT_MASK, regval) * VOLTAGE_LSB) / 1000;
-+
-+	return 0;
-+}
-+
-+static int tps23861_read_current(struct tps23861_data *data, int channel,
-+				 long *val)
-+{
-+	unsigned int current_lsb;
-+	unsigned int regval;
-+	int err;
-+
-+	if (data->shunt_resistor == SHUNT_RESISTOR_DEFAULT)
-+		current_lsb = CURRENT_LSB_255;
-+	else
-+		current_lsb = CURRENT_LSB_250;
-+
-+	err = regmap_bulk_read(data->regmap,
-+			       PORT_1_CURRENT_LSB + channel * PORT_N_CURRENT_LSB_OFFSET,
-+			       &regval, 2);
-+	if (err < 0)
-+		return err;
-+
-+	*val = (FIELD_GET(VOLTAGE_CURRENT_MASK, regval) * current_lsb) / 1000000;
-+
-+	return 0;
-+}
-+
-+static int tps23861_port_disable(struct tps23861_data *data, int channel)
-+{
-+	unsigned int regval = 0;
-+	int err;
-+
-+	regval |= BIT(channel + 4);
-+	err = regmap_write(data->regmap, POWER_ENABLE, regval);
-+
-+	return err;
-+}
-+
-+static int tps23861_port_enable(struct tps23861_data *data, int channel)
-+{
-+	unsigned int regval = 0;
-+	int err;
-+
-+	regval |= BIT(channel);
-+	regval |= BIT(channel + 4);
-+	err = regmap_write(data->regmap, DETECT_CLASS_RESTART, regval);
-+
-+	return err;
-+}
-+
-+static umode_t tps23861_is_visible(const void *data, enum hwmon_sensor_types type,
-+				   u32 attr, int channel)
-+{
-+	switch (type) {
-+	case hwmon_temp:
-+		switch (attr) {
-+		case hwmon_temp_input:
-+		case hwmon_temp_label:
-+			return 0444;
-+		default:
-+			return 0;
-+		}
-+	case hwmon_in:
-+		switch (attr) {
-+		case hwmon_in_input:
-+		case hwmon_in_label:
-+			return 0444;
-+		case hwmon_in_enable:
-+			return 0200;
-+		default:
-+			return 0;
-+		}
-+	case hwmon_curr:
-+		switch (attr) {
-+		case hwmon_curr_input:
-+		case hwmon_curr_label:
-+			return 0444;
-+		default:
-+			return 0;
-+		}
-+	default:
-+		return 0;
-+	}
-+}
-+
-+static int tps23861_write(struct device *dev, enum hwmon_sensor_types type,
-+			  u32 attr, int channel, long val)
-+{
-+	struct tps23861_data *data = dev_get_drvdata(dev);
-+	int err;
-+
-+	switch (type) {
-+	case hwmon_in:
-+		switch (attr) {
-+		case hwmon_in_enable:
-+			if (val == 0)
-+				err = tps23861_port_disable(data, channel);
-+			else if (val == 1)
-+				err = tps23861_port_enable(data, channel);
-+			else
-+				err = -EINVAL;
-+			break;
-+		default:
-+			return -EOPNOTSUPP;
-+		}
-+		break;
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+
-+	return err;
-+}
-+
-+static int tps23861_read(struct device *dev, enum hwmon_sensor_types type,
-+			 u32 attr, int channel, long *val)
-+{
-+	struct tps23861_data *data = dev_get_drvdata(dev);
-+	int err;
-+
-+	switch (type) {
-+	case hwmon_temp:
-+		switch (attr) {
-+		case hwmon_temp_input:
-+			err = tps23861_read_temp(data, val);
-+			break;
-+		default:
-+			return -EOPNOTSUPP;
-+		}
-+		break;
-+	case hwmon_in:
-+		switch (attr) {
-+		case hwmon_in_input:
-+			err = tps23861_read_voltage(data, channel, val);
-+			break;
-+		default:
-+			return -EOPNOTSUPP;
-+		}
-+		break;
-+	case hwmon_curr:
-+		switch (attr) {
-+		case hwmon_curr_input:
-+			err = tps23861_read_current(data, channel, val);
-+			break;
-+		default:
-+			return -EOPNOTSUPP;
-+		}
-+		break;
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+
-+	return err;
-+}
-+
-+static const char * const tps23861_port_label[] = {
-+	"Port1",
-+	"Port2",
-+	"Port3",
-+	"Port4",
-+	"Input",
-+};
-+
-+static int tps23861_read_string(struct device *dev,
-+				enum hwmon_sensor_types type,
-+				u32 attr, int channel, const char **str)
-+{
-+	switch (type) {
-+	case hwmon_in:
-+	case hwmon_curr:
-+		*str = tps23861_port_label[channel];
-+		break;
-+	case hwmon_temp:
-+		*str = "Die";
-+		break;
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct hwmon_channel_info *tps23861_info[] = {
-+	HWMON_CHANNEL_INFO(chip,
-+			   HWMON_C_REGISTER_TZ),
-+	HWMON_CHANNEL_INFO(temp,
-+			   HWMON_T_INPUT | HWMON_T_LABEL),
-+	HWMON_CHANNEL_INFO(in,
-+			   HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL,
-+			   HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL,
-+			   HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL,
-+			   HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL,
-+			   HWMON_I_INPUT | HWMON_I_LABEL),
-+	HWMON_CHANNEL_INFO(curr,
-+			   HWMON_C_INPUT | HWMON_C_LABEL,
-+			   HWMON_C_INPUT | HWMON_C_LABEL,
-+			   HWMON_C_INPUT | HWMON_C_LABEL,
-+			   HWMON_C_INPUT | HWMON_C_LABEL),
-+	NULL
-+};
-+
-+static const struct hwmon_ops tps23861_hwmon_ops = {
-+	.is_visible = tps23861_is_visible,
-+	.write = tps23861_write,
-+	.read = tps23861_read,
-+	.read_string = tps23861_read_string,
-+};
-+
-+static const struct hwmon_chip_info tps23861_chip_info = {
-+	.ops = &tps23861_hwmon_ops,
-+	.info = tps23861_info,
-+};
-+
-+static char *tps23861_port_operating_mode(struct tps23861_data *data, int port)
-+{
-+	unsigned int regval;
-+	int mode;
-+
-+	regmap_read(data->regmap, OPERATING_MODE, &regval);
-+
-+	switch (port) {
-+	case 1:
-+		mode = FIELD_GET(OPERATING_MODE_PORT_1_MASK, regval);
-+		break;
-+	case 2:
-+		mode = FIELD_GET(OPERATING_MODE_PORT_2_MASK, regval);
-+		break;
-+	case 3:
-+		mode = FIELD_GET(OPERATING_MODE_PORT_3_MASK, regval);
-+		break;
-+	case 4:
-+		mode = FIELD_GET(OPERATING_MODE_PORT_4_MASK, regval);
-+		break;
-+	default:
-+		mode = -EINVAL;
-+	}
-+
-+	switch (mode) {
-+	case OPERATING_MODE_OFF:
-+		return "Off";
-+	case OPERATING_MODE_MANUAL:
-+		return "Manual";
-+	case OPERATING_MODE_SEMI:
-+		return "Semi-Auto";
-+	case OPERATING_MODE_AUTO:
-+		return "Auto";
-+	default:
-+		return "Invalid";
-+	}
-+}
-+
-+static char *tps23861_port_detect_status(struct tps23861_data *data, int port)
-+{
-+	unsigned int regval;
-+
-+	regmap_read(data->regmap,
-+		    PORT_1_STATUS + (port - 1),
-+		    &regval);
-+
-+	switch (FIELD_GET(PORT_STATUS_DETECT_MASK, regval)) {
-+	case PORT_DETECT_UNKNOWN:
-+		return "Unknown device";
-+	case PORT_DETECT_SHORT:
-+		return "Short circuit";
-+	case PORT_DETECT_RESISTANCE_LOW:
-+		return "Too low resistance";
-+	case PORT_DETECT_RESISTANCE_OK:
-+		return "Valid resistance";
-+	case PORT_DETECT_RESISTANCE_HIGH:
-+		return "Too high resistance";
-+	case PORT_DETECT_OPEN_CIRCUIT:
-+		return "Open circuit";
-+	case PORT_DETECT_MOSFET_FAULT:
-+		return "MOSFET fault";
-+	case PORT_DETECT_LEGACY:
-+		return "Legacy device";
-+	case PORT_DETECT_CAPACITANCE_INVALID_BEYOND:
-+		return "Invalid capacitance, beyond clamp voltage";
-+	case PORT_DETECT_CAPACITANCE_INVALID_DELTA:
-+		return "Invalid capacitance, insufficient voltage delta";
-+	case PORT_DETECT_CAPACITANCE_OUT_OF_RANGE:
-+		return "Valid capacitance, outside of legacy range";
-+	case PORT_DETECT_RESERVED:
-+	case PORT_DETECT_RESERVED_2:
-+	default:
-+		return "Invalid";
-+	}
-+}
-+
-+static char *tps23861_port_class_status(struct tps23861_data *data, int port)
-+{
-+	unsigned int regval;
-+
-+	regmap_read(data->regmap,
-+		    PORT_1_STATUS + (port - 1),
-+		    &regval);
-+
-+	switch (FIELD_GET(PORT_STATUS_CLASS_MASK, regval)) {
-+	case PORT_CLASS_UNKNOWN:
-+		return "Unknown";
-+	case PORT_CLASS_RESERVED:
-+	case PORT_CLASS_0:
-+		return "0";
-+	case PORT_CLASS_1:
-+		return "1";
-+	case PORT_CLASS_2:
-+		return "2";
-+	case PORT_CLASS_3:
-+		return "3";
-+	case PORT_CLASS_4:
-+		return "4";
-+	case PORT_CLASS_OVERCURRENT:
-+		return "Overcurrent";
-+	case PORT_CLASS_MISMATCH:
-+		return "Mismatch";
-+	default:
-+		return "Invalid";
-+	}
-+}
-+
-+static char *tps23861_port_poe_plus_status(struct tps23861_data *data, int port)
-+{
-+	unsigned int regval;
-+
-+	regmap_read(data->regmap, POE_PLUS, &regval);
-+
-+	if (BIT(port + 3) & regval)
-+		return "Yes";
-+	else
-+		return "No";
-+}
-+
-+static int tps23861_port_resistance(struct tps23861_data *data, int port)
-+{
-+	u16 regval;
-+
-+	regmap_bulk_read(data->regmap,
-+			 PORT_1_RESISTANCE_LSB + PORT_N_RESISTANCE_LSB_OFFSET * (port - 1),
-+			 &regval,
-+			 2);
-+
-+	switch (FIELD_GET(PORT_RESISTANCE_RSN_MASK, regval)) {
-+	case PORT_RESISTANCE_RSN_OTHER:
-+		return (FIELD_GET(PORT_RESISTANCE_MASK, regval) * RESISTANCE_LSB) / 10000;
-+	case PORT_RESISTANCE_RSN_LOW:
-+		return (FIELD_GET(PORT_RESISTANCE_MASK, regval) * RESISTANCE_LSB_LOW) / 10000;
-+	case PORT_RESISTANCE_RSN_SHORT:
-+	case PORT_RESISTANCE_RSN_OPEN:
-+	default:
-+		return 0;
-+	}
-+}
-+
-+static int tps23861_port_status_show(struct seq_file *s, void *data)
-+{
-+	struct tps23861_data *priv = s->private;
-+	int i;
-+
-+	for (i = 1; i < TPS23861_NUM_PORTS + 1; i++) {
-+		seq_printf(s, "Port: \t\t%d\n", i);
-+		seq_printf(s, "Operating mode: %s\n", tps23861_port_operating_mode(priv, i));
-+		seq_printf(s, "Detected: \t%s\n", tps23861_port_detect_status(priv, i));
-+		seq_printf(s, "Class: \t\t%s\n", tps23861_port_class_status(priv, i));
-+		seq_printf(s, "PoE Plus: \t%s\n", tps23861_port_poe_plus_status(priv, i));
-+		seq_printf(s, "Resistance: \t%d\n", tps23861_port_resistance(priv, i));
-+		seq_putc(s, '\n');
-+	}
-+
-+	return 0;
-+}
-+
-+DEFINE_SHOW_ATTRIBUTE(tps23861_port_status);
-+
-+static void tps23861_init_debugfs(struct tps23861_data *data)
-+{
-+	data->debugfs_dir = debugfs_create_dir(data->client->name, NULL);
-+
-+	debugfs_create_file("port_status",
-+			    0400,
-+			    data->debugfs_dir,
-+			    data,
-+			    &tps23861_port_status_fops);
-+}
-+
-+static int tps23861_probe(struct i2c_client *client)
-+{
-+	struct device *dev = &client->dev;
-+	struct tps23861_data *data;
-+	struct device *hwmon_dev;
-+	u32 shunt_resistor;
-+
-+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
-+	if (!data)
-+		return -ENOMEM;
-+
-+	data->client = client;
-+	i2c_set_clientdata(client, data);
-+
-+	data->regmap = devm_regmap_init_i2c(client, &tps23861_regmap_config);
-+	if (IS_ERR(data->regmap)) {
-+		dev_err(dev, "failed to allocate register map\n");
-+		return PTR_ERR(data->regmap);
-+	}
-+
-+	if (!of_property_read_u32(dev->of_node, "shunt-resistor-micro-ohms", &shunt_resistor))
-+		data->shunt_resistor = shunt_resistor;
-+	else
-+		data->shunt_resistor = SHUNT_RESISTOR_DEFAULT;
-+
-+	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
-+							 data, &tps23861_chip_info,
-+							 NULL);
-+	if (IS_ERR(hwmon_dev))
-+		return PTR_ERR(hwmon_dev);
-+
-+	tps23861_init_debugfs(data);
-+
-+	return 0;
-+}
-+
-+static int tps23861_remove(struct i2c_client *client)
-+{
-+	struct tps23861_data *data = i2c_get_clientdata(client);
-+
-+	debugfs_remove_recursive(data->debugfs_dir);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id __maybe_unused tps23861_of_match[] = {
-+	{ .compatible = "ti,tps23861", },
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(of, tps23861_of_match);
-+
-+static struct i2c_driver tps23861_driver = {
-+	.probe_new		= tps23861_probe,
-+	.remove			= tps23861_remove,
-+	.driver = {
-+		.name		= "tps23861",
-+		.of_match_table	= of_match_ptr(tps23861_of_match),
-+	},
-+};
-+module_i2c_driver(tps23861_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
-+MODULE_DESCRIPTION("TI TPS23861 PoE PSE");
diff --git a/target/linux/generic/backport-5.10/872-v5.13-01-hwmon-tps23861-define-regmap-max-register.patch b/target/linux/generic/backport-5.10/872-v5.13-01-hwmon-tps23861-define-regmap-max-register.patch
deleted file mode 100644
index f7ed386944e6..000000000000
--- a/target/linux/generic/backport-5.10/872-v5.13-01-hwmon-tps23861-define-regmap-max-register.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 3d61a7b3a714eb3ef1777e3c576576aca2b85365 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko@sartura.hr>
-Date: Thu, 10 Jun 2021 00:07:26 +0200
-Subject: [PATCH 2/4] hwmon: (tps23861) define regmap max register
-
-Define the max register address the device supports.
-This allows reading the whole register space via
-regmap debugfs, without it only register 0x0 is visible.
-
-This was forgotten in the original driver commit.
-
-Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver")
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
-Link: https://lore.kernel.org/r/20210609220728.499879-1-robert.marko@sartura.hr
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
----
- drivers/hwmon/tps23861.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/hwmon/tps23861.c
-+++ b/drivers/hwmon/tps23861.c
-@@ -117,6 +117,7 @@ struct tps23861_data {
- static struct regmap_config tps23861_regmap_config = {
- 	.reg_bits = 8,
- 	.val_bits = 8,
-+	.max_register = 0x6f,
- };
- 
- static int tps23861_read_temp(struct tps23861_data *data, long *val)
diff --git a/target/linux/generic/backport-5.10/872-v5.13-02-hwmon-tps23861-set-current-shunt-value.patch b/target/linux/generic/backport-5.10/872-v5.13-02-hwmon-tps23861-set-current-shunt-value.patch
deleted file mode 100644
index f1051f77d5af..000000000000
--- a/target/linux/generic/backport-5.10/872-v5.13-02-hwmon-tps23861-set-current-shunt-value.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 9bca598d4a86e88afb29fdb516c68b2519bd0fb9 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko@sartura.hr>
-Date: Thu, 10 Jun 2021 00:07:27 +0200
-Subject: [PATCH 3/4] hwmon: (tps23861) set current shunt value
-
-TPS23861 has a configuration bit for setting of the
-current shunt value used on the board.
-Its bit 0 of the General Mask 1 register.
-
-According to the datasheet bit values are:
-0 for 255 mOhm (Default)
-1 for 250 mOhm
-
-So, configure the bit before registering the hwmon
-device according to the value passed in the DTS or
-default one if none is passed.
-
-This caused potentially reading slightly skewed values
-due to max current value being 1.02A when 250mOhm shunt
-is used instead of 1.0A when 255mOhm is used.
-
-Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver")
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
-Link: https://lore.kernel.org/r/20210609220728.499879-2-robert.marko@sartura.hr
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
----
- drivers/hwmon/tps23861.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/hwmon/tps23861.c
-+++ b/drivers/hwmon/tps23861.c
-@@ -99,6 +99,9 @@
- #define POWER_ENABLE			0x19
- #define TPS23861_NUM_PORTS		4
- 
-+#define TPS23861_GENERAL_MASK_1		0x17
-+#define TPS23861_CURRENT_SHUNT_MASK	BIT(0)
-+
- #define TEMPERATURE_LSB			652 /* 0.652 degrees Celsius */
- #define VOLTAGE_LSB			3662 /* 3.662 mV */
- #define SHUNT_RESISTOR_DEFAULT		255000 /* 255 mOhm */
-@@ -561,6 +564,15 @@ static int tps23861_probe(struct i2c_cli
- 	else
- 		data->shunt_resistor = SHUNT_RESISTOR_DEFAULT;
- 
-+	if (data->shunt_resistor == SHUNT_RESISTOR_DEFAULT)
-+		regmap_clear_bits(data->regmap,
-+				  TPS23861_GENERAL_MASK_1,
-+				  TPS23861_CURRENT_SHUNT_MASK);
-+	else
-+		regmap_set_bits(data->regmap,
-+				TPS23861_GENERAL_MASK_1,
-+				TPS23861_CURRENT_SHUNT_MASK);
-+
- 	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
- 							 data, &tps23861_chip_info,
- 							 NULL);
diff --git a/target/linux/generic/backport-5.10/872-v5.13-03-hwmon-tps23861-correct-shunt-LSB-values.patch b/target/linux/generic/backport-5.10/872-v5.13-03-hwmon-tps23861-correct-shunt-LSB-values.patch
deleted file mode 100644
index 2485d7a0ee32..000000000000
--- a/target/linux/generic/backport-5.10/872-v5.13-03-hwmon-tps23861-correct-shunt-LSB-values.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From b447e689a26614ce08a431e8000e8a650a63dcb3 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko@sartura.hr>
-Date: Thu, 10 Jun 2021 00:07:28 +0200
-Subject: [PATCH 4/4] hwmon: (tps23861) correct shunt LSB values
-
-Current shunt LSB values got reversed during in the
-original driver commit.
-
-So, correct the current shunt LSB values according to
-the datasheet.
-
-This caused reading slightly skewed current values.
-
-Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver")
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
-Link: https://lore.kernel.org/r/20210609220728.499879-3-robert.marko@sartura.hr
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
----
- drivers/hwmon/tps23861.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/hwmon/tps23861.c
-+++ b/drivers/hwmon/tps23861.c
-@@ -105,8 +105,8 @@
- #define TEMPERATURE_LSB			652 /* 0.652 degrees Celsius */
- #define VOLTAGE_LSB			3662 /* 3.662 mV */
- #define SHUNT_RESISTOR_DEFAULT		255000 /* 255 mOhm */
--#define CURRENT_LSB_255			62260 /* 62.260 uA */
--#define CURRENT_LSB_250			61039 /* 61.039 uA */
-+#define CURRENT_LSB_250			62260 /* 62.260 uA */
-+#define CURRENT_LSB_255			61039 /* 61.039 uA */
- #define RESISTANCE_LSB			110966 /* 11.0966 Ohm*/
- #define RESISTANCE_LSB_LOW		157216 /* 15.7216 Ohm*/
- 
diff --git a/target/linux/generic/backport-5.10/873-v6.0-hwmon-tps23861-fix-byte-order-in-current-and-voltage.patch b/target/linux/generic/backport-5.10/873-v6.0-hwmon-tps23861-fix-byte-order-in-current-and-voltage.patch
deleted file mode 100644
index 45c2d0b4a43b..000000000000
--- a/target/linux/generic/backport-5.10/873-v6.0-hwmon-tps23861-fix-byte-order-in-current-and-voltage.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 0eabb1396656f215a5333a9444158b17b0fd3247 Mon Sep 17 00:00:00 2001
-From: Alexandru Gagniuc <mr.nuke.me@gmail.com>
-Date: Wed, 20 Jul 2022 22:22:55 -0500
-Subject: hwmon: (tps23861) fix byte order in current and voltage registers
-
-Trying to use this driver on a big-endian machine results in garbage
-values for voltage and current. The tps23861 registers are little-
-endian, and regmap_read_bulk() does not do byte order conversion. Thus
-on BE machines, the most significant bytes got modified, and were
-trimmed by the VOLTAGE_CURRENT_MASK.
-
-To resolve this use uint16_t values, and convert them to host byte
-order using le16_to_cpu(). This results in correct readings on MIPS.
-
-Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
-Link: https://lore.kernel.org/r/20220721032255.2850647-1-mr.nuke.me@gmail.com
-[groeck: Use __le16 instead of uint16_t]
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
----
- drivers/hwmon/tps23861.c | 14 +++++++++-----
- 1 file changed, 9 insertions(+), 5 deletions(-)
-
---- a/drivers/hwmon/tps23861.c
-+++ b/drivers/hwmon/tps23861.c
-@@ -140,7 +140,8 @@ static int tps23861_read_temp(struct tps
- static int tps23861_read_voltage(struct tps23861_data *data, int channel,
- 				 long *val)
- {
--	unsigned int regval;
-+	__le16 regval;
-+	long raw_val;
- 	int err;
- 
- 	if (channel < TPS23861_NUM_PORTS) {
-@@ -155,7 +156,8 @@ static int tps23861_read_voltage(struct
- 	if (err < 0)
- 		return err;
- 
--	*val = (FIELD_GET(VOLTAGE_CURRENT_MASK, regval) * VOLTAGE_LSB) / 1000;
-+	raw_val = le16_to_cpu(regval);
-+	*val = (FIELD_GET(VOLTAGE_CURRENT_MASK, raw_val) * VOLTAGE_LSB) / 1000;
- 
- 	return 0;
- }
-@@ -163,8 +165,9 @@ static int tps23861_read_voltage(struct
- static int tps23861_read_current(struct tps23861_data *data, int channel,
- 				 long *val)
- {
--	unsigned int current_lsb;
--	unsigned int regval;
-+	long raw_val, current_lsb;
-+	__le16 regval;
-+
- 	int err;
- 
- 	if (data->shunt_resistor == SHUNT_RESISTOR_DEFAULT)
-@@ -178,7 +181,8 @@ static int tps23861_read_current(struct
- 	if (err < 0)
- 		return err;
- 
--	*val = (FIELD_GET(VOLTAGE_CURRENT_MASK, regval) * current_lsb) / 1000000;
-+	raw_val = le16_to_cpu(regval);
-+	*val = (FIELD_GET(VOLTAGE_CURRENT_MASK, raw_val) * current_lsb) / 1000000;
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-5.10/880-v5.19-cdc_ether-export-usbnet_cdc_zte_rx_fixup.patch b/target/linux/generic/backport-5.10/880-v5.19-cdc_ether-export-usbnet_cdc_zte_rx_fixup.patch
deleted file mode 100644
index b5a226181ec3..000000000000
--- a/target/linux/generic/backport-5.10/880-v5.19-cdc_ether-export-usbnet_cdc_zte_rx_fixup.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From d91a03b72c5f9c25e5b976f8f67bcf279601d644 Mon Sep 17 00:00:00 2001
-From: Lech Perczak <lech.perczak@gmail.com>
-Date: Fri, 1 Apr 2022 22:03:55 +0200
-Subject: [PATCH 1/3] cdc_ether: export usbnet_cdc_zte_rx_fixup
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Commit bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling")
-introduces a workaround for certain ZTE modems reporting invalid MAC
-addresses over CDC-ECM.
-The same issue was present on their RNDIS interface,which was fixed in
-commit a5a18bdf7453 ("rndis_host: Set valid random MAC on buggy devices").
-
-However, internal modem of ZTE MF286R router, on its RNDIS interface, also
-exhibits a second issue fixed already in CDC-ECM, of the device not
-respecting configured random MAC address. In order to share the fixup for
-this with rndis_host driver, export the workaround function, which will
-be re-used in the following commit in rndis_host.
-
-Cc: Kristian Evensen <kristian.evensen@gmail.com>
-Cc: Bjørn Mork <bjorn@mork.no>
-Cc: Oliver Neukum <oliver@neukum.org>
-Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
----
- drivers/net/usb/cdc_ether.c | 3 ++-
- include/linux/usb/usbnet.h  | 1 +
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/net/usb/cdc_ether.c
-+++ b/drivers/net/usb/cdc_ether.c
-@@ -466,7 +466,7 @@ static int usbnet_cdc_zte_bind(struct us
-  * device MAC address has been updated). Always set MAC address to that of the
-  * device.
-  */
--static int usbnet_cdc_zte_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
-+int usbnet_cdc_zte_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
- {
- 	if (skb->len < ETH_HLEN || !(skb->data[0] & 0x02))
- 		return 1;
-@@ -476,6 +476,7 @@ static int usbnet_cdc_zte_rx_fixup(struc
- 
- 	return 1;
- }
-+EXPORT_SYMBOL_GPL(usbnet_cdc_zte_rx_fixup);
- 
- /* Ensure correct link state
-  *
---- a/include/linux/usb/usbnet.h
-+++ b/include/linux/usb/usbnet.h
-@@ -215,6 +215,7 @@ extern int usbnet_ether_cdc_bind(struct
- extern int usbnet_cdc_bind(struct usbnet *, struct usb_interface *);
- extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *);
- extern void usbnet_cdc_status(struct usbnet *, struct urb *);
-+extern int usbnet_cdc_zte_rx_fixup(struct usbnet *dev, struct sk_buff *skb);
- 
- /* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
- #define	DEFAULT_FILTER	(USB_CDC_PACKET_TYPE_BROADCAST \
diff --git a/target/linux/generic/backport-5.10/881-v5.19-rndis_host-enable-the-bogus-MAC-fixup-for-ZTE-device.patch b/target/linux/generic/backport-5.10/881-v5.19-rndis_host-enable-the-bogus-MAC-fixup-for-ZTE-device.patch
deleted file mode 100644
index e37c89a360f8..000000000000
--- a/target/linux/generic/backport-5.10/881-v5.19-rndis_host-enable-the-bogus-MAC-fixup-for-ZTE-device.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From 69a9efb689b43fedf5f19431f1889aa6b8d35d55 Mon Sep 17 00:00:00 2001
-From: Lech Perczak <lech.perczak@gmail.com>
-Date: Fri, 1 Apr 2022 22:04:01 +0200
-Subject: [PATCH 2/3] rndis_host: enable the bogus MAC fixup for ZTE devices
- from cdc_ether
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Certain ZTE modems, namely: MF823. MF831, MF910, built-in modem from
-MF286R, expose both CDC-ECM and RNDIS network interfaces.
-They have a trait of ignoring the locally-administered MAC address
-configured on the interface both in CDC-ECM and RNDIS part,
-and this leads to dropping of incoming traffic by the host.
-However, the workaround was only present in CDC-ECM, and MF286R
-explicitly requires it in RNDIS mode.
-
-Re-use the workaround in rndis_host as well, to fix operation of MF286R
-module, some versions of which expose only the RNDIS interface. Do so by
-introducing new flag, RNDIS_DRIVER_DATA_DST_MAC_FIXUP, and testing for it
-in rndis_rx_fixup. This is required, as RNDIS uses frame batching, and all
-of the packets inside the batch need the fixup. This might introduce a
-performance penalty, because test is done for every returned Ethernet
-frame.
-
-Apply the workaround to both "flavors" of RNDIS interfaces, as older ZTE
-modems, like MF823 found in the wild, report the USB_CLASS_COMM class
-interfaces, while MF286R reports USB_CLASS_WIRELESS_CONTROLLER.
-
-Suggested-by: Bjørn Mork <bjorn@mork.no>
-Cc: Kristian Evensen <kristian.evensen@gmail.com>
-Cc: Oliver Neukum <oliver@neukum.org>
-Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
----
- drivers/net/usb/rndis_host.c   | 32 ++++++++++++++++++++++++++++++++
- include/linux/usb/rndis_host.h |  1 +
- 2 files changed, 33 insertions(+)
-
---- a/drivers/net/usb/rndis_host.c
-+++ b/drivers/net/usb/rndis_host.c
-@@ -486,10 +486,14 @@ EXPORT_SYMBOL_GPL(rndis_unbind);
-  */
- int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
- {
-+	bool dst_mac_fixup;
-+
- 	/* This check is no longer done by usbnet */
- 	if (skb->len < dev->net->hard_header_len)
- 		return 0;
- 
-+	dst_mac_fixup = !!(dev->driver_info->data & RNDIS_DRIVER_DATA_DST_MAC_FIXUP);
-+
- 	/* peripheral may have batched packets to us... */
- 	while (likely(skb->len)) {
- 		struct rndis_data_hdr	*hdr = (void *)skb->data;
-@@ -524,10 +528,17 @@ int rndis_rx_fixup(struct usbnet *dev, s
- 			break;
- 		skb_pull(skb, msg_len - sizeof *hdr);
- 		skb_trim(skb2, data_len);
-+
-+		if (unlikely(dst_mac_fixup))
-+			usbnet_cdc_zte_rx_fixup(dev, skb2);
-+
- 		usbnet_skb_return(dev, skb2);
- 	}
- 
- 	/* caller will usbnet_skb_return the remaining packet */
-+	if (unlikely(dst_mac_fixup))
-+		usbnet_cdc_zte_rx_fixup(dev, skb);
-+
- 	return 1;
- }
- EXPORT_SYMBOL_GPL(rndis_rx_fixup);
-@@ -601,6 +612,17 @@ static const struct driver_info	rndis_po
- 	.tx_fixup =	rndis_tx_fixup,
- };
- 
-+static const struct driver_info	zte_rndis_info = {
-+	.description =	"ZTE RNDIS device",
-+	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
-+	.data =		RNDIS_DRIVER_DATA_DST_MAC_FIXUP,
-+	.bind =		rndis_bind,
-+	.unbind =	rndis_unbind,
-+	.status =	rndis_status,
-+	.rx_fixup =	rndis_rx_fixup,
-+	.tx_fixup =	rndis_tx_fixup,
-+};
-+
- /*-------------------------------------------------------------------------*/
- 
- static const struct usb_device_id	products [] = {
-@@ -610,6 +632,16 @@ static const struct usb_device_id	produc
- 				      USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
- 	.driver_info = (unsigned long) &rndis_poll_status_info,
- }, {
-+	/* ZTE WWAN modules */
-+	USB_VENDOR_AND_INTERFACE_INFO(0x19d2,
-+				      USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
-+	.driver_info = (unsigned long)&zte_rndis_info,
-+}, {
-+	/* ZTE WWAN modules, ACM flavour */
-+	USB_VENDOR_AND_INTERFACE_INFO(0x19d2,
-+				      USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
-+	.driver_info = (unsigned long)&zte_rndis_info,
-+}, {
- 	/* Hytera Communications DMR radios' "Radio to PC Network" */
- 	USB_VENDOR_AND_INTERFACE_INFO(0x238b,
- 				      USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
---- a/include/linux/usb/rndis_host.h
-+++ b/include/linux/usb/rndis_host.h
-@@ -197,6 +197,7 @@ struct rndis_keepalive_c {	/* IN (option
- 
- /* Flags for driver_info::data */
- #define RNDIS_DRIVER_DATA_POLL_STATUS	1	/* poll status before control */
-+#define RNDIS_DRIVER_DATA_DST_MAC_FIXUP	2	/* device ignores configured MAC address */
- 
- extern void rndis_status(struct usbnet *dev, struct urb *urb);
- extern int
diff --git a/target/linux/generic/backport-5.10/882-v5.19-rndis_host-limit-scope-of-bogus-MAC-address-detectio.patch b/target/linux/generic/backport-5.10/882-v5.19-rndis_host-limit-scope-of-bogus-MAC-address-detectio.patch
deleted file mode 100644
index 38d022771427..000000000000
--- a/target/linux/generic/backport-5.10/882-v5.19-rndis_host-limit-scope-of-bogus-MAC-address-detectio.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 1bfbe1799b9ec5d00f7f032d6e7db1980e466aeb Mon Sep 17 00:00:00 2001
-From: Lech Perczak <lech.perczak@gmail.com>
-Date: Sat, 2 Apr 2022 02:19:57 +0200
-Subject: [PATCH 3/3] rndis_host: limit scope of bogus MAC address detection to
- ZTE devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Reporting of bogus MAC addresses and ignoring configuration of new
-destination address wasn't observed outside of a range of ZTE devices,
-among which this seems to be the common bug. Align rndis_host driver
-with implementation found in cdc_ether, which also limits this workaround
-to ZTE devices.
-
-Suggested-by: Bjørn Mork <bjorn@mork.no>
-Cc: Kristian Evensen <kristian.evensen@gmail.com>
-Cc: Oliver Neukum <oliver@neukum.org>
-Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
----
- drivers/net/usb/rndis_host.c | 17 ++++++++++++-----
- 1 file changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/net/usb/rndis_host.c
-+++ b/drivers/net/usb/rndis_host.c
-@@ -419,10 +419,7 @@ generic_rndis_bind(struct usbnet *dev, s
- 		goto halt_fail_and_release;
- 	}
- 
--	if (bp[0] & 0x02)
--		eth_hw_addr_random(net);
--	else
--		ether_addr_copy(net->dev_addr, bp);
-+	ether_addr_copy(net->dev_addr, bp);
- 
- 	/* set a nonzero filter to enable data transfers */
- 	memset(u.set, 0, sizeof *u.set);
-@@ -464,6 +461,16 @@ static int rndis_bind(struct usbnet *dev
- 	return generic_rndis_bind(dev, intf, FLAG_RNDIS_PHYM_NOT_WIRELESS);
- }
- 
-+static int zte_rndis_bind(struct usbnet *dev, struct usb_interface *intf)
-+{
-+	int status = rndis_bind(dev, intf);
-+
-+	if (!status && (dev->net->dev_addr[0] & 0x02))
-+		eth_hw_addr_random(dev->net);
-+
-+	return status;
-+}
-+
- void rndis_unbind(struct usbnet *dev, struct usb_interface *intf)
- {
- 	struct rndis_halt	*halt;
-@@ -616,7 +623,7 @@ static const struct driver_info	zte_rndi
- 	.description =	"ZTE RNDIS device",
- 	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
- 	.data =		RNDIS_DRIVER_DATA_DST_MAC_FIXUP,
--	.bind =		rndis_bind,
-+	.bind =		zte_rndis_bind,
- 	.unbind =	rndis_unbind,
- 	.status =	rndis_status,
- 	.rx_fixup =	rndis_rx_fixup,
diff --git a/target/linux/generic/backport-5.10/883-v5.11-Bluetooth-btrtl-Refine-the-ic_id_table-for-clearer-a.patch b/target/linux/generic/backport-5.10/883-v5.11-Bluetooth-btrtl-Refine-the-ic_id_table-for-clearer-a.patch
deleted file mode 100644
index 0975033d8337..000000000000
--- a/target/linux/generic/backport-5.10/883-v5.11-Bluetooth-btrtl-Refine-the-ic_id_table-for-clearer-a.patch
+++ /dev/null
@@ -1,183 +0,0 @@
-From 6f9ff24645f55ffae12ef717b4f221c3e7dfe115 Mon Sep 17 00:00:00 2001
-From: Max Chou <max.chou@realtek.com>
-Date: Wed, 4 Nov 2020 20:04:14 +0800
-Subject: [PATCH] Bluetooth: btrtl: Refine the ic_id_table for clearer and more
- regular
-
-Enhance the ic_id_table that it's able to maintain regularly.
-To judge which chip should be initialized by LMP subversion, HCI revision,
- HCI version and HCI bus which were given in the ic_id_table.
-Also, refine the incorrect LMP subversion of ROM for RTL8723D and
-RTL8723A.
-
-Suggested-by: Alex Lu <alex_lu@realsil.com.cn>
-Signed-off-by: Max Chou <max.chou@realtek.com>
-Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
----
- drivers/bluetooth/btrtl.c | 65 ++++++++++++---------------------------
- 1 file changed, 19 insertions(+), 46 deletions(-)
-
---- a/drivers/bluetooth/btrtl.c
-+++ b/drivers/bluetooth/btrtl.c
-@@ -18,10 +18,8 @@
- #define VERSION "0.1"
- 
- #define RTL_EPATCH_SIGNATURE	"Realtech"
--#define RTL_ROM_LMP_3499	0x3499
- #define RTL_ROM_LMP_8723A	0x1200
- #define RTL_ROM_LMP_8723B	0x8723
--#define RTL_ROM_LMP_8723D	0x8873
- #define RTL_ROM_LMP_8821A	0x8821
- #define RTL_ROM_LMP_8761A	0x8761
- #define RTL_ROM_LMP_8822B	0x8822
-@@ -31,10 +29,13 @@
- #define IC_MATCH_FL_HCIREV	(1 << 1)
- #define IC_MATCH_FL_HCIVER	(1 << 2)
- #define IC_MATCH_FL_HCIBUS	(1 << 3)
--#define IC_INFO(lmps, hcir) \
--	.match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV, \
-+#define IC_INFO(lmps, hcir, hciv, bus) \
-+	.match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV | \
-+		       IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS, \
- 	.lmp_subver = (lmps), \
--	.hci_rev = (hcir)
-+	.hci_rev = (hcir), \
-+	.hci_ver = (hciv), \
-+	.hci_bus = (bus)
- 
- struct id_table {
- 	__u16 match_flags;
-@@ -58,112 +59,85 @@ struct btrtl_device_info {
- };
- 
- static const struct id_table ic_id_table[] = {
--	{ IC_MATCH_FL_LMPSUBV, RTL_ROM_LMP_8723A, 0x0,
--	  .config_needed = false,
--	  .has_rom_version = false,
--	  .fw_name = "rtl_bt/rtl8723a_fw.bin",
--	  .cfg_name = NULL },
--
--	{ IC_MATCH_FL_LMPSUBV, RTL_ROM_LMP_3499, 0x0,
-+	/* 8723A */
-+	{ IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB),
- 	  .config_needed = false,
- 	  .has_rom_version = false,
- 	  .fw_name = "rtl_bt/rtl8723a_fw.bin",
- 	  .cfg_name = NULL },
- 
- 	/* 8723BS */
--	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV |
--			 IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS,
--	  .lmp_subver = RTL_ROM_LMP_8723B,
--	  .hci_rev = 0xb,
--	  .hci_ver = 6,
--	  .hci_bus = HCI_UART,
-+	{ IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_UART),
- 	  .config_needed = true,
- 	  .has_rom_version = true,
- 	  .fw_name  = "rtl_bt/rtl8723bs_fw.bin",
- 	  .cfg_name = "rtl_bt/rtl8723bs_config" },
- 
- 	/* 8723B */
--	{ IC_INFO(RTL_ROM_LMP_8723B, 0xb),
-+	{ IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB),
- 	  .config_needed = false,
- 	  .has_rom_version = true,
- 	  .fw_name  = "rtl_bt/rtl8723b_fw.bin",
- 	  .cfg_name = "rtl_bt/rtl8723b_config" },
- 
- 	/* 8723D */
--	{ IC_INFO(RTL_ROM_LMP_8723B, 0xd),
-+	{ IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB),
- 	  .config_needed = true,
- 	  .has_rom_version = true,
- 	  .fw_name  = "rtl_bt/rtl8723d_fw.bin",
- 	  .cfg_name = "rtl_bt/rtl8723d_config" },
- 
- 	/* 8723DS */
--	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV |
--			 IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS,
--	  .lmp_subver = RTL_ROM_LMP_8723B,
--	  .hci_rev = 0xd,
--	  .hci_ver = 8,
--	  .hci_bus = HCI_UART,
-+	{ IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_UART),
- 	  .config_needed = true,
- 	  .has_rom_version = true,
- 	  .fw_name  = "rtl_bt/rtl8723ds_fw.bin",
- 	  .cfg_name = "rtl_bt/rtl8723ds_config" },
- 
--	/* 8723DU */
--	{ IC_INFO(RTL_ROM_LMP_8723D, 0x826C),
--	  .config_needed = true,
--	  .has_rom_version = true,
--	  .fw_name  = "rtl_bt/rtl8723d_fw.bin",
--	  .cfg_name = "rtl_bt/rtl8723d_config" },
--
- 	/* 8821A */
--	{ IC_INFO(RTL_ROM_LMP_8821A, 0xa),
-+	{ IC_INFO(RTL_ROM_LMP_8821A, 0xa, 0x6, HCI_USB),
- 	  .config_needed = false,
- 	  .has_rom_version = true,
- 	  .fw_name  = "rtl_bt/rtl8821a_fw.bin",
- 	  .cfg_name = "rtl_bt/rtl8821a_config" },
- 
- 	/* 8821C */
--	{ IC_INFO(RTL_ROM_LMP_8821A, 0xc),
-+	{ IC_INFO(RTL_ROM_LMP_8821A, 0xc, 0x8, HCI_USB),
- 	  .config_needed = false,
- 	  .has_rom_version = true,
- 	  .fw_name  = "rtl_bt/rtl8821c_fw.bin",
- 	  .cfg_name = "rtl_bt/rtl8821c_config" },
- 
- 	/* 8761A */
--	{ IC_INFO(RTL_ROM_LMP_8761A, 0xa),
-+	{ IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB),
- 	  .config_needed = false,
- 	  .has_rom_version = true,
- 	  .fw_name  = "rtl_bt/rtl8761a_fw.bin",
- 	  .cfg_name = "rtl_bt/rtl8761a_config" },
- 
- 	/* 8761B */
--	{ IC_INFO(RTL_ROM_LMP_8761A, 0xb),
-+	{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
- 	  .config_needed = false,
- 	  .has_rom_version = true,
- 	  .fw_name  = "rtl_bt/rtl8761b_fw.bin",
- 	  .cfg_name = "rtl_bt/rtl8761b_config" },
- 
- 	/* 8822C with UART interface */
--	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV |
--			 IC_MATCH_FL_HCIBUS,
--	  .lmp_subver = RTL_ROM_LMP_8822B,
--	  .hci_rev = 0x000c,
--	  .hci_ver = 0x0a,
--	  .hci_bus = HCI_UART,
-+	{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
- 	  .config_needed = true,
- 	  .has_rom_version = true,
- 	  .fw_name  = "rtl_bt/rtl8822cs_fw.bin",
- 	  .cfg_name = "rtl_bt/rtl8822cs_config" },
- 
- 	/* 8822C with USB interface */
--	{ IC_INFO(RTL_ROM_LMP_8822B, 0xc),
-+	{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_USB),
- 	  .config_needed = false,
- 	  .has_rom_version = true,
- 	  .fw_name  = "rtl_bt/rtl8822cu_fw.bin",
- 	  .cfg_name = "rtl_bt/rtl8822cu_config" },
- 
- 	/* 8822B */
--	{ IC_INFO(RTL_ROM_LMP_8822B, 0xb),
-+	{ IC_INFO(RTL_ROM_LMP_8822B, 0xb, 0x7, HCI_USB),
- 	  .config_needed = true,
- 	  .has_rom_version = true,
- 	  .fw_name  = "rtl_bt/rtl8822b_fw.bin",
-@@ -654,7 +628,6 @@ int btrtl_download_firmware(struct hci_d
- 
- 	switch (btrtl_dev->ic_info->lmp_subver) {
- 	case RTL_ROM_LMP_8723A:
--	case RTL_ROM_LMP_3499:
- 		return btrtl_setup_rtl8723a(hdev, btrtl_dev);
- 	case RTL_ROM_LMP_8723B:
- 	case RTL_ROM_LMP_8821A:
diff --git a/target/linux/generic/backport-5.10/884-v5.14-Bluetooth-btrtl-rename-USB-fw-for-RTL8761.patch b/target/linux/generic/backport-5.10/884-v5.14-Bluetooth-btrtl-rename-USB-fw-for-RTL8761.patch
deleted file mode 100644
index 5372ce874a16..000000000000
--- a/target/linux/generic/backport-5.10/884-v5.14-Bluetooth-btrtl-rename-USB-fw-for-RTL8761.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 9fd2e2949b43dea869f7fce0f8f51df44f635d59 Mon Sep 17 00:00:00 2001
-From: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
-Date: Fri, 28 May 2021 17:26:44 +0200
-Subject: [PATCH] Bluetooth: btrtl: rename USB fw for RTL8761
-
-According Realteks own BT drivers firmware RTL8761B is for UART
-and RTL8761BU is for USB.
-
-Change existing 8761B to UART and add an 8761BU entry for USB
-
-Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
-Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
----
- drivers/bluetooth/btrtl.c | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
---- a/drivers/bluetooth/btrtl.c
-+++ b/drivers/bluetooth/btrtl.c
-@@ -116,12 +116,19 @@ static const struct id_table ic_id_table
- 	  .cfg_name = "rtl_bt/rtl8761a_config" },
- 
- 	/* 8761B */
--	{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
-+	{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART),
- 	  .config_needed = false,
- 	  .has_rom_version = true,
- 	  .fw_name  = "rtl_bt/rtl8761b_fw.bin",
- 	  .cfg_name = "rtl_bt/rtl8761b_config" },
- 
-+	/* 8761BU */
-+	{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
-+	  .config_needed = false,
-+	  .has_rom_version = true,
-+	  .fw_name  = "rtl_bt/rtl8761bu_fw.bin",
-+	  .cfg_name = "rtl_bt/rtl8761bu_config" },
-+
- 	/* 8822C with UART interface */
- 	{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
- 	  .config_needed = true,
diff --git a/target/linux/generic/backport-5.10/885-v5.14-Bluetooth-btusb-Add-0x0b05-0x190e-Realtek-8761BU-ASU.patch b/target/linux/generic/backport-5.10/885-v5.14-Bluetooth-btusb-Add-0x0b05-0x190e-Realtek-8761BU-ASU.patch
deleted file mode 100644
index c9c5413b14b1..000000000000
--- a/target/linux/generic/backport-5.10/885-v5.14-Bluetooth-btusb-Add-0x0b05-0x190e-Realtek-8761BU-ASU.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 33404381c5e875cbd57eec6d9bbacd3b13b404c9 Mon Sep 17 00:00:00 2001
-From: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
-Date: Fri, 28 May 2021 17:26:45 +0200
-Subject: [PATCH] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS
- BT500) device.
-
-T:  Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12   MxCh= 0
-D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
-P:  Vendor=0b05 ProdID=190e Rev= 2.00
-S:  Manufacturer=Realtek
-S:  Product=ASUS USB-BT500
-S:  SerialNumber=xxxxxxxx
-C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
-I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
-E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
-E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
-I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
-I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
-I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
-I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
-I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
-I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
-Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
-Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
----
- drivers/bluetooth/btusb.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/bluetooth/btusb.c
-+++ b/drivers/bluetooth/btusb.c
-@@ -455,6 +455,10 @@ static const struct usb_device_id blackl
- 	{ USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
- 	{ USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
- 
-+	/* Additional Realtek 8761BU Bluetooth devices */
-+	{ USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
-+	  					     BTUSB_WIDEBAND_SPEECH },
-+
- 	/* Additional Realtek 8821AE Bluetooth devices */
- 	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
- 	{ USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
diff --git a/target/linux/generic/backport-5.10/886-v5.16-Bluetooth-btusb-Add-support-for-TP-Link-UB500-Adapte.patch b/target/linux/generic/backport-5.10/886-v5.16-Bluetooth-btusb-Add-support-for-TP-Link-UB500-Adapte.patch
deleted file mode 100644
index dee77c63eb32..000000000000
--- a/target/linux/generic/backport-5.10/886-v5.16-Bluetooth-btusb-Add-support-for-TP-Link-UB500-Adapte.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 4fd6d490796171bf786090fee782e252186632e4 Mon Sep 17 00:00:00 2001
-From: Nicholas Flintham <nick@flinny.org>
-Date: Thu, 30 Sep 2021 09:22:39 +0100
-Subject: [PATCH] Bluetooth: btusb: Add support for TP-Link UB500 Adapter
-
-Add support for TP-Link UB500 Adapter (RTL8761B)
-
-* /sys/kernel/debug/usb/devices
-T:  Bus=01 Lev=02 Prnt=05 Port=01 Cnt=01 Dev#= 78 Spd=12   MxCh= 0
-D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
-P:  Vendor=2357 ProdID=0604 Rev= 2.00
-S:  Manufacturer=
-S:  Product=TP-Link UB500 Adapter
-S:  SerialNumber=E848B8C82000
-C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
-I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
-E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
-E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
-I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
-I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
-I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
-I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
-I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
-I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
-
-Signed-off-by: Nicholas Flintham <nick@flinny.org>
-Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
----
- drivers/bluetooth/btusb.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/bluetooth/btusb.c
-+++ b/drivers/bluetooth/btusb.c
-@@ -455,6 +455,10 @@ static const struct usb_device_id blackl
- 	{ USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
- 	{ USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
- 
-+	/* Additional Realtek 8761B Bluetooth devices */
-+	{ USB_DEVICE(0x2357, 0x0604), .driver_info = BTUSB_REALTEK |
-+						     BTUSB_WIDEBAND_SPEECH },
-+
- 	/* Additional Realtek 8761BU Bluetooth devices */
- 	{ USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
- 	  					     BTUSB_WIDEBAND_SPEECH },
diff --git a/target/linux/generic/backport-5.10/887-v5.18-Bluetooth-btusb-Add-another-Realtek-8761BU.patch b/target/linux/generic/backport-5.10/887-v5.18-Bluetooth-btusb-Add-another-Realtek-8761BU.patch
deleted file mode 100644
index dd6476d1d2ac..000000000000
--- a/target/linux/generic/backport-5.10/887-v5.18-Bluetooth-btusb-Add-another-Realtek-8761BU.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 6dfbe29f45fb0bde29213dbd754a79e8bfc6ecef Mon Sep 17 00:00:00 2001
-From: Helmut Grohne <helmut@subdivi.de>
-Date: Sat, 26 Feb 2022 16:22:56 +0100
-Subject: [PATCH] Bluetooth: btusb: Add another Realtek 8761BU
-
-This device is sometimes wrapped with a label "EDUP".
-
-T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=107 Spd=12   MxCh= 0
-D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
-P:  Vendor=2550 ProdID=8761 Rev= 2.00
-S:  Manufacturer=Realtek
-S:  Product=Bluetooth Radio
-S:  SerialNumber=00E04C239987
-C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
-I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
-E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
-E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
-I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
-I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
-I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
-I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
-I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
-I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
-E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
-E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
-
-Signed-off-by: Helmut Grohne <helmut@subdivi.de>
-Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1955351
-Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
----
- drivers/bluetooth/btusb.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/bluetooth/btusb.c
-+++ b/drivers/bluetooth/btusb.c
-@@ -462,6 +462,8 @@ static const struct usb_device_id blackl
- 	/* Additional Realtek 8761BU Bluetooth devices */
- 	{ USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
- 	  					     BTUSB_WIDEBAND_SPEECH },
-+	{ USB_DEVICE(0x2550, 0x8761), .driver_info = BTUSB_REALTEK |
-+						     BTUSB_WIDEBAND_SPEECH },
- 
- 	/* Additional Realtek 8821AE Bluetooth devices */
- 	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
diff --git a/target/linux/generic/config-5.10 b/target/linux/generic/config-5.10
deleted file mode 100644
index 9c4aad86c148..000000000000
--- a/target/linux/generic/config-5.10
+++ /dev/null
@@ -1,7205 +0,0 @@
-# CONFIG_104_QUAD_8 is not set
-CONFIG_32BIT=y
-CONFIG_64BIT_TIME=y
-# CONFIG_6LOWPAN is not set
-# CONFIG_6LOWPAN_DEBUGFS is not set
-# CONFIG_6PACK is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_9P_FS is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_AB8500_CORE is not set
-# CONFIG_ABP060MG is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_ACENIC is not set
-# CONFIG_ACERHDF is not set
-# CONFIG_ACER_WIRELESS is not set
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_ACPI_ALS is not set
-# CONFIG_ACPI_APEI is not set
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_CONFIGFS is not set
-# CONFIG_ACPI_CUSTOM_METHOD is not set
-# CONFIG_ACPI_EXTLOG is not set
-# CONFIG_ACPI_HED is not set
-# CONFIG_ACPI_NFIT is not set
-# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
-# CONFIG_ACPI_TABLE_UPGRADE is not set
-# CONFIG_ACPI_VIDEO is not set
-# CONFIG_AD2S1200 is not set
-# CONFIG_AD2S1210 is not set
-# CONFIG_AD2S90 is not set
-# CONFIG_AD5064 is not set
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_AD5272 is not set
-# CONFIG_AD5360 is not set
-# CONFIG_AD5380 is not set
-# CONFIG_AD5421 is not set
-# CONFIG_AD5446 is not set
-# CONFIG_AD5449 is not set
-# CONFIG_AD5504 is not set
-# CONFIG_AD5592R is not set
-# CONFIG_AD5593R is not set
-# CONFIG_AD5624R_SPI is not set
-# CONFIG_AD5686 is not set
-# CONFIG_AD5686_SPI is not set
-# CONFIG_AD5696_I2C is not set
-# CONFIG_AD5755 is not set
-# CONFIG_AD5758 is not set
-# CONFIG_AD5761 is not set
-# CONFIG_AD5764 is not set
-# CONFIG_AD5770R is not set
-# CONFIG_AD5791 is not set
-# CONFIG_AD5933 is not set
-# CONFIG_AD7091R5 is not set
-# CONFIG_AD7124 is not set
-# CONFIG_AD7150 is not set
-# CONFIG_AD7152 is not set
-# CONFIG_AD7192 is not set
-# CONFIG_AD7266 is not set
-# CONFIG_AD7280 is not set
-# CONFIG_AD7291 is not set
-# CONFIG_AD7292 is not set
-# CONFIG_AD7298 is not set
-# CONFIG_AD7303 is not set
-# CONFIG_AD7476 is not set
-# CONFIG_AD7606 is not set
-# CONFIG_AD7606_IFACE_PARALLEL is not set
-# CONFIG_AD7606_IFACE_SPI is not set
-# CONFIG_AD7746 is not set
-# CONFIG_AD7766 is not set
-# CONFIG_AD7768_1 is not set
-# CONFIG_AD7780 is not set
-# CONFIG_AD7791 is not set
-# CONFIG_AD7793 is not set
-# CONFIG_AD7816 is not set
-# CONFIG_AD7887 is not set
-# CONFIG_AD7923 is not set
-# CONFIG_AD7949 is not set
-# CONFIG_AD799X is not set
-# CONFIG_AD8366 is not set
-# CONFIG_AD8801 is not set
-# CONFIG_AD9467 is not set
-# CONFIG_AD9523 is not set
-# CONFIG_AD9832 is not set
-# CONFIG_AD9834 is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_ADE7854 is not set
-# CONFIG_ADF4350 is not set
-# CONFIG_ADF4371 is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADIN_PHY is not set
-# CONFIG_ADIS16080 is not set
-# CONFIG_ADIS16130 is not set
-# CONFIG_ADIS16136 is not set
-# CONFIG_ADIS16201 is not set
-# CONFIG_ADIS16203 is not set
-# CONFIG_ADIS16209 is not set
-# CONFIG_ADIS16240 is not set
-# CONFIG_ADIS16260 is not set
-# CONFIG_ADIS16400 is not set
-# CONFIG_ADIS16460 is not set
-# CONFIG_ADIS16475 is not set
-# CONFIG_ADIS16480 is not set
-# CONFIG_ADI_AXI_ADC is not set
-# CONFIG_ADJD_S311 is not set
-# CONFIG_ADM6996_PHY is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_ADT7316 is not set
-# CONFIG_ADUX1020 is not set
-CONFIG_ADVISE_SYSCALLS=y
-# CONFIG_ADXL345_I2C is not set
-# CONFIG_ADXL345_SPI is not set
-# CONFIG_ADXL372_I2C is not set
-# CONFIG_ADXL372_SPI is not set
-# CONFIG_ADXRS290 is not set
-# CONFIG_ADXRS450 is not set
-CONFIG_AEABI=y
-# CONFIG_AFE4403 is not set
-# CONFIG_AFE4404 is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_AFS_DEBUG_CURSOR is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_AF_KCM is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_AF_RXRPC_INJECT_LOSS is not set
-# CONFIG_AF_RXRPC_IPV6 is not set
-# CONFIG_AGP is not set
-# CONFIG_AHCI_BRCM is not set
-# CONFIG_AHCI_CEVA is not set
-# CONFIG_AHCI_IMX is not set
-# CONFIG_AHCI_MVEBU is not set
-# CONFIG_AHCI_QORIQ is not set
-# CONFIG_AHCI_XGENE is not set
-CONFIG_AIO=y
-# CONFIG_AIRO is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_AIX_PARTITION is not set
-# CONFIG_AK09911 is not set
-# CONFIG_AK8974 is not set
-# CONFIG_AK8975 is not set
-# CONFIG_AL3010 is not set
-# CONFIG_AL3320A is not set
-# CONFIG_ALIM7101_WDT is not set
-CONFIG_ALLOW_DEV_COREDUMP=y
-# CONFIG_ALTERA_MBOX is not set
-# CONFIG_ALTERA_MSGDMA is not set
-# CONFIG_ALTERA_STAPL is not set
-# CONFIG_ALTERA_TSE is not set
-# CONFIG_ALX is not set
-# CONFIG_AL_FIC is not set
-# CONFIG_AM2315 is not set
-# CONFIG_AM335X_PHY_USB is not set
-# CONFIG_AMBA_PL08X is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_AMD_MEM_ENCRYPT is not set
-# CONFIG_AMD_PHY is not set
-# CONFIG_AMD_XGBE is not set
-# CONFIG_AMD_XGBE_HAVE_ECC is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_AMILO_RFKILL is not set
-# CONFIG_ANDROID is not set
-CONFIG_ANON_INODES=y
-# CONFIG_APDS9300 is not set
-# CONFIG_APDS9802ALS is not set
-# CONFIG_APDS9960 is not set
-# CONFIG_APM8018X is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_APPLE_GMUX is not set
-# CONFIG_APPLE_MFI_FASTCHARGE is not set
-# CONFIG_APPLE_PROPERTIES is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_AQTION is not set
-# CONFIG_AQUANTIA_PHY is not set
-# CONFIG_AR5523 is not set
-# CONFIG_AR7 is not set
-# CONFIG_AR8216_PHY is not set
-# CONFIG_AR8216_PHY_LEDS is not set
-# CONFIG_ARCH_ACTIONS is not set
-# CONFIG_ARCH_AGILEX is not set
-# CONFIG_ARCH_ALPINE is not set
-# CONFIG_ARCH_ARTPEC is not set
-# CONFIG_ARCH_ASPEED is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_AXXIA is not set
-# CONFIG_ARCH_BCM is not set
-# CONFIG_ARCH_BCM2835 is not set
-# CONFIG_ARCH_BCM_21664 is not set
-# CONFIG_ARCH_BCM_23550 is not set
-# CONFIG_ARCH_BCM_281XX is not set
-# CONFIG_ARCH_BCM_5301X is not set
-# CONFIG_ARCH_BCM_53573 is not set
-# CONFIG_ARCH_BCM_63XX is not set
-# CONFIG_ARCH_BCM_CYGNUS is not set
-# CONFIG_ARCH_BCM_IPROC is not set
-# CONFIG_ARCH_BCM_NSP is not set
-# CONFIG_ARCH_BERLIN is not set
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-# CONFIG_ARCH_BITMAIN is not set
-# CONFIG_ARCH_BRCMSTB is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DIGICOLOR is not set
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_EXYNOS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_HI3xxx is not set
-# CONFIG_ARCH_HIGHBANK is not set
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_K3 is not set
-# CONFIG_ARCH_KEEMBAY is not set
-# CONFIG_ARCH_KEYSTONE is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_LG1K is not set
-# CONFIG_ARCH_LPC32XX is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
-# CONFIG_ARCH_MILBEAUT is not set
-CONFIG_ARCH_MMAP_RND_BITS=8
-CONFIG_ARCH_MMAP_RND_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_BITS_MIN=8
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_MSTARV7 is not set
-# CONFIG_ARCH_MULTIPLATFORM is not set
-# CONFIG_ARCH_MULTI_V6 is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_NPCM is not set
-# CONFIG_ARCH_NSPIRE is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP2PLUS is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_OXNAS is not set
-# CONFIG_ARCH_PICOXCELL is not set
-# CONFIG_ARCH_PRIMA2 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_QCOM is not set
-# CONFIG_ARCH_RANDOM is not set
-# CONFIG_ARCH_RDA is not set
-# CONFIG_ARCH_REALTEK is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_RENESAS is not set
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_S32 is not set
-# CONFIG_ARCH_S3C24XX is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SEATTLE is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_SIRF is not set
-# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_SPARX5 is not set
-# CONFIG_ARCH_SPRD is not set
-# CONFIG_ARCH_STI is not set
-# CONFIG_ARCH_STM32 is not set
-# CONFIG_ARCH_STRATIX10 is not set
-# CONFIG_ARCH_SUNXI is not set
-# CONFIG_ARCH_SYNQUACER is not set
-# CONFIG_ARCH_TANGO is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_THUNDER is not set
-# CONFIG_ARCH_THUNDER2 is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_UNIPHIER is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_VIRT is not set
-# CONFIG_ARCH_VISCONTI is not set
-# CONFIG_ARCH_VT8500 is not set
-# CONFIG_ARCH_VULCAN is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_WANTS_THP_SWAP is not set
-# CONFIG_ARCH_WM8505 is not set
-# CONFIG_ARCH_WM8750 is not set
-# CONFIG_ARCH_WM8850 is not set
-# CONFIG_ARCH_XGENE is not set
-# CONFIG_ARCH_ZX is not set
-# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_ZYNQMP is not set
-# CONFIG_ARCNET is not set
-# CONFIG_ARC_EMAC is not set
-# CONFIG_ARC_IRQ_NO_AUTOSAVE is not set
-# CONFIG_ARM64_16K_PAGES is not set
-# CONFIG_ARM64_64K_PAGES is not set
-# CONFIG_ARM64_AMU_EXTN is not set
-# CONFIG_ARM64_BTI is not set
-# CONFIG_ARM64_CRYPTO is not set
-# CONFIG_ARM64_E0PD is not set
-# CONFIG_ARM64_ERRATUM_1024718 is not set
-# CONFIG_ARM64_ERRATUM_1165522 is not set
-# CONFIG_ARM64_ERRATUM_1286807 is not set
-# CONFIG_ARM64_ERRATUM_1319367 is not set
-# CONFIG_ARM64_ERRATUM_1418040 is not set
-# CONFIG_ARM64_ERRATUM_1463225 is not set
-# CONFIG_ARM64_ERRATUM_1508412 is not set
-# CONFIG_ARM64_ERRATUM_1530923 is not set
-# CONFIG_ARM64_ERRATUM_1542419 is not set
-# CONFIG_ARM64_ERRATUM_819472 is not set
-# CONFIG_ARM64_ERRATUM_824069 is not set
-# CONFIG_ARM64_ERRATUM_826319 is not set
-# CONFIG_ARM64_ERRATUM_827319 is not set
-# CONFIG_ARM64_ERRATUM_832075 is not set
-# CONFIG_ARM64_ERRATUM_834220 is not set
-# CONFIG_ARM64_ERRATUM_843419 is not set
-# CONFIG_ARM64_ERRATUM_845719 is not set
-# CONFIG_ARM64_ERRATUM_858921 is not set
-# CONFIG_ARM64_HW_AFDBM is not set
-# CONFIG_ARM64_LSE_ATOMICS is not set
-# CONFIG_ARM64_MODULE_PLTS is not set
-# CONFIG_ARM64_MTE is not set
-# CONFIG_ARM64_PAN is not set
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PSEUDO_NMI is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-# CONFIG_ARM64_RAS_EXTN is not set
-# CONFIG_ARM64_RELOC_TEST is not set
-CONFIG_ARM64_SW_TTBR0_PAN=y
-# CONFIG_ARM64_TLB_RANGE is not set
-# CONFIG_ARM64_UAO is not set
-# CONFIG_ARM64_USE_LSE_ATOMICS is not set
-# CONFIG_ARM64_VA_BITS_48 is not set
-# CONFIG_ARM64_VHE is not set
-# CONFIG_ARM_APPENDED_DTB is not set
-# CONFIG_ARM_ARCH_TIMER is not set
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-# CONFIG_ARM_CCI is not set
-# CONFIG_ARM_CCI400_PMU is not set
-# CONFIG_ARM_CCI5xx_PMU is not set
-# CONFIG_ARM_CCI_PMU is not set
-# CONFIG_ARM_CCN is not set
-# CONFIG_ARM_CMN is not set
-# CONFIG_ARM_CPUIDLE is not set
-CONFIG_ARM_CPU_TOPOLOGY=y
-# CONFIG_ARM_CRYPTO is not set
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-# CONFIG_ARM_DSU_PMU is not set
-# CONFIG_ARM_ERRATA_326103 is not set
-# CONFIG_ARM_ERRATA_364296 is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_ARM_ERRATA_643719 is not set
-# CONFIG_ARM_ERRATA_720789 is not set
-# CONFIG_ARM_ERRATA_742230 is not set
-# CONFIG_ARM_ERRATA_742231 is not set
-# CONFIG_ARM_ERRATA_743622 is not set
-# CONFIG_ARM_ERRATA_751472 is not set
-# CONFIG_ARM_ERRATA_754322 is not set
-# CONFIG_ARM_ERRATA_754327 is not set
-# CONFIG_ARM_ERRATA_764369 is not set
-# CONFIG_ARM_ERRATA_773022 is not set
-# CONFIG_ARM_ERRATA_775420 is not set
-# CONFIG_ARM_ERRATA_798181 is not set
-# CONFIG_ARM_ERRATA_814220 is not set
-# CONFIG_ARM_ERRATA_818325_852422 is not set
-# CONFIG_ARM_ERRATA_821420 is not set
-# CONFIG_ARM_ERRATA_825619 is not set
-# CONFIG_ARM_ERRATA_852421 is not set
-# CONFIG_ARM_ERRATA_852423 is not set
-# CONFIG_ARM_ERRATA_857271 is not set
-# CONFIG_ARM_ERRATA_857272 is not set
-CONFIG_ARM_GIC_MAX_NR=1
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-# CONFIG_ARM_KPROBES_TEST is not set
-# CONFIG_ARM_LPAE is not set
-# CONFIG_ARM_MHU is not set
-# CONFIG_ARM_MODULE_PLTS is not set
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-# CONFIG_ARM_PSCI is not set
-# CONFIG_ARM_PSCI_CHECKER is not set
-# CONFIG_ARM_PSCI_CPUIDLE is not set
-# CONFIG_ARM_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM_SBSA_WATCHDOG is not set
-# CONFIG_ARM_SCMI_PROTOCOL is not set
-# CONFIG_ARM_SCPI_PROTOCOL is not set
-# CONFIG_ARM_SDE_INTERFACE is not set
-# CONFIG_ARM_SMCCC_SOC_ID is not set
-# CONFIG_ARM_SMC_WATCHDOG is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-# CONFIG_ARM_SPE_PMU is not set
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_ARM_TIMER_SP804 is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_ARM_VIRT_EXT is not set
-# CONFIG_AS3935 is not set
-# CONFIG_AS73211 is not set
-# CONFIG_ASM9260_TIMER is not set
-# CONFIG_ASN1 is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_ASUS_WIRELESS is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
-# CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE is not set
-# CONFIG_ASYNC_RAID6_TEST is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AT803X_PHY is not set
-# CONFIG_AT91_SAMA5D2_ADC is not set
-# CONFIG_ATA is not set
-# CONFIG_ATAGS is not set
-CONFIG_ATAGS_PROC=y
-# CONFIG_ATALK is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_ATA_ACPI is not set
-CONFIG_ATA_BMDMA=y
-# CONFIG_ATA_FORCE is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_ATA_LEDS is not set
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_ATA_PIIX is not set
-CONFIG_ATA_SFF=y
-# CONFIG_ATA_VERBOSE_ERROR is not set
-# CONFIG_ATH10K is not set
-# CONFIG_ATH25 is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH6KL is not set
-# CONFIG_ATH79 is not set
-# CONFIG_ATH9K is not set
-# CONFIG_ATH9K_HTC is not set
-# CONFIG_ATH_DEBUG is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1C is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL2 is not set
-# CONFIG_ATLAS_EZO_SENSOR is not set
-# CONFIG_ATLAS_PH_SENSOR is not set
-# CONFIG_ATM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_ATMEL_PIT is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_BR2684 is not set
-CONFIG_ATM_BR2684_IPFILTER=y
-# CONFIG_ATM_CLIP is not set
-CONFIG_ATM_CLIP_NO_ICMP=y
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_MPOA is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_ATP is not set
-# CONFIG_AUDIT is not set
-# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
-# CONFIG_AURORA_NB8800 is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTO_ZRELADDR is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_AX25 is not set
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_AX88796 is not set
-# CONFIG_AX88796B_PHY is not set
-# CONFIG_AXP20X_ADC is not set
-# CONFIG_AXP20X_POWER is not set
-# CONFIG_AXP288_ADC is not set
-# CONFIG_AXP288_FUEL_GAUGE is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_B44 is not set
-# CONFIG_B53 is not set
-# CONFIG_B53_MDIO_DRIVER is not set
-# CONFIG_B53_MMAP_DRIVER is not set
-# CONFIG_B53_SERDES is not set
-# CONFIG_B53_SPI_DRIVER is not set
-# CONFIG_B53_SRAB_DRIVER is not set
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-# CONFIG_BACKLIGHT_APPLE is not set
-# CONFIG_BACKLIGHT_ARCXCNN is not set
-# CONFIG_BACKLIGHT_BD6107 is not set
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_BACKLIGHT_GPIO is not set
-# CONFIG_BACKLIGHT_KTD253 is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_BACKLIGHT_LED is not set
-# CONFIG_BACKLIGHT_LM3630A is not set
-# CONFIG_BACKLIGHT_LM3639 is not set
-# CONFIG_BACKLIGHT_LP855X is not set
-# CONFIG_BACKLIGHT_LV5207LP is not set
-# CONFIG_BACKLIGHT_PANDORA is not set
-# CONFIG_BACKLIGHT_PM8941_WLED is not set
-# CONFIG_BACKLIGHT_PWM is not set
-# CONFIG_BACKLIGHT_QCOM_WLED is not set
-# CONFIG_BACKLIGHT_RPI is not set
-# CONFIG_BACKLIGHT_SAHARA is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_BAREUDP is not set
-CONFIG_BASE_FULL=y
-CONFIG_BASE_SMALL=0
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_BATTERY_BQ27XXX is not set
-# CONFIG_BATTERY_BQ27XXX_HDQ is not set
-# CONFIG_BATTERY_CW2015 is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2780 is not set
-# CONFIG_BATTERY_DS2781 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_GAUGE_LTC2941 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
-# CONFIG_BATTERY_LEGO_EV3 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BATTERY_MAX17042 is not set
-# CONFIG_BATTERY_MAX1721X is not set
-# CONFIG_BATTERY_RT5033 is not set
-# CONFIG_BATTERY_SBS is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BCACHE is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM54140_PHY is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_BCM63XX_PHY is not set
-# CONFIG_BCM7038_WDT is not set
-# CONFIG_BCM7XXX_PHY is not set
-# CONFIG_BCM84881_PHY is not set
-# CONFIG_BCM87XX_PHY is not set
-# CONFIG_BCMA is not set
-# CONFIG_BCMA_DRIVER_GPIO is not set
-CONFIG_BCMA_POSSIBLE=y
-# CONFIG_BCMGENET is not set
-# CONFIG_BCM_IPROC_ADC is not set
-# CONFIG_BCM_KONA_USB2_PHY is not set
-# CONFIG_BCM_SBA_RAID is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BE2NET is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_BGMAC is not set
-# CONFIG_BH1750 is not set
-# CONFIG_BH1780 is not set
-# CONFIG_BIG_KEYS is not set
-# CONFIG_BIG_LITTLE is not set
-# CONFIG_BINARY_PRINTF is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_ELF_FDPIC is not set
-# CONFIG_BINFMT_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_BINFMT_SCRIPT=y
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_CGROUP_IOCOST is not set
-# CONFIG_BLK_CGROUP_IOLATENCY is not set
-# CONFIG_BLK_CMDLINE_PARSER is not set
-# CONFIG_BLK_DEBUG_FS is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_BSGLIB is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_CS5536 is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDE_AU1XXX is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_NULL_BLK is not set
-# CONFIG_BLK_DEV_NVME is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_PMEM is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_RBD is not set
-# CONFIG_BLK_DEV_RSXX is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SKD is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_THROTTLING is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_ZONED is not set
-# CONFIG_BLK_INLINE_ENCRYPTION is not set
-# CONFIG_BLK_SED_OPAL is not set
-# CONFIG_BLK_WBT is not set
-CONFIG_BLOCK=y
-# CONFIG_BMA180 is not set
-# CONFIG_BMA220 is not set
-# CONFIG_BMA400 is not set
-# CONFIG_BMC150_ACCEL is not set
-# CONFIG_BMC150_MAGN is not set
-# CONFIG_BMC150_MAGN_I2C is not set
-# CONFIG_BMC150_MAGN_SPI is not set
-# CONFIG_BME680 is not set
-# CONFIG_BMG160 is not set
-# CONFIG_BMI160_I2C is not set
-# CONFIG_BMI160_SPI is not set
-# CONFIG_BMIPS_GENERIC is not set
-# CONFIG_BMP280 is not set
-# CONFIG_BNA is not set
-# CONFIG_BNX2 is not set
-# CONFIG_BNX2X is not set
-# CONFIG_BNX2X_SRIOV is not set
-# CONFIG_BNXT is not set
-# CONFIG_BONDING is not set
-# CONFIG_BOOKE_WDT is not set
-CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-# CONFIG_BOOTTIME_TRACING is not set
-# CONFIG_BOOT_CONFIG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_BOOT_RAW=y
-# CONFIG_BOUNCE is not set
-CONFIG_BPF=y
-# CONFIG_BPFILTER is not set
-CONFIG_BPF_JIT=y
-# CONFIG_BPF_JIT_ALWAYS_ON is not set
-CONFIG_BPF_JIT_DEFAULT_ON=y
-# CONFIG_BPF_PRELOAD is not set
-# CONFIG_BPF_STREAM_PARSER is not set
-CONFIG_BPF_SYSCALL=y
-CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
-# CONFIG_BPQETHER is not set
-CONFIG_BQL=y
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_BRCMFMAC is not set
-# CONFIG_BRCMSMAC is not set
-# CONFIG_BRCMSTB_GISB_ARB is not set
-CONFIG_BRIDGE=y
-# CONFIG_BRIDGE_EBT_802_3 is not set
-# CONFIG_BRIDGE_EBT_AMONG is not set
-# CONFIG_BRIDGE_EBT_ARP is not set
-# CONFIG_BRIDGE_EBT_ARPREPLY is not set
-# CONFIG_BRIDGE_EBT_BROUTE is not set
-# CONFIG_BRIDGE_EBT_DNAT is not set
-# CONFIG_BRIDGE_EBT_IP is not set
-# CONFIG_BRIDGE_EBT_IP6 is not set
-# CONFIG_BRIDGE_EBT_LIMIT is not set
-# CONFIG_BRIDGE_EBT_LOG is not set
-# CONFIG_BRIDGE_EBT_MARK is not set
-# CONFIG_BRIDGE_EBT_MARK_T is not set
-# CONFIG_BRIDGE_EBT_NFLOG is not set
-# CONFIG_BRIDGE_EBT_PKTTYPE is not set
-# CONFIG_BRIDGE_EBT_REDIRECT is not set
-# CONFIG_BRIDGE_EBT_SNAT is not set
-# CONFIG_BRIDGE_EBT_STP is not set
-# CONFIG_BRIDGE_EBT_T_FILTER is not set
-# CONFIG_BRIDGE_EBT_T_NAT is not set
-# CONFIG_BRIDGE_EBT_VLAN is not set
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_BRIDGE_MRP is not set
-# CONFIG_BRIDGE_NETFILTER is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-CONFIG_BRIDGE_VLAN_FILTERING=y
-# CONFIG_BROADCOM_PHY is not set
-CONFIG_BROKEN_ON_SMP=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_BT is not set
-# CONFIG_BTRFS_ASSERT is not set
-# CONFIG_BTRFS_DEBUG is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_BTRFS_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS_REF_VERIFY is not set
-# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
-# CONFIG_BT_ATH3K is not set
-# CONFIG_BT_BNEP is not set
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_BREDR is not set
-# CONFIG_BT_CMTP is not set
-# CONFIG_BT_FEATURE_DEBUG is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
-# CONFIG_BT_HCIBTUSB_MTK is not set
-# CONFIG_BT_HCIBTUSB_RTL is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIUART_3WIRE is not set
-# CONFIG_BT_HCIUART_AG6XX is not set
-# CONFIG_BT_HCIUART_ATH3K is not set
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIUART_MRVL is not set
-# CONFIG_BT_HCIUART_QCA is not set
-# CONFIG_BT_HCIUART_RTL is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_HIDP is not set
-# CONFIG_BT_HS is not set
-# CONFIG_BT_LE is not set
-# CONFIG_BT_LEDS is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_BT_MSFTEXT is not set
-# CONFIG_BT_MTKSDIO is not set
-# CONFIG_BT_MTKUART is not set
-# CONFIG_BT_RFCOMM is not set
-CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_SELFTEST is not set
-CONFIG_BUG=y
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-CONFIG_BUILDTIME_EXTABLE_SORT=y
-CONFIG_BUILDTIME_TABLE_SORT=y
-# CONFIG_BUILD_BIN2C is not set
-CONFIG_BUILD_SALT=""
-# CONFIG_C2PORT is not set
-CONFIG_CACHE_L2X0_PMU=y
-# CONFIG_CADENCE_WATCHDOG is not set
-# CONFIG_CAIF is not set
-# CONFIG_CAN is not set
-# CONFIG_CAN_BCM is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
-# CONFIG_CAN_DEV is not set
-# CONFIG_CAN_GS_USB is not set
-# CONFIG_CAN_GW is not set
-# CONFIG_CAN_HI311X is not set
-# CONFIG_CAN_IFI_CANFD is not set
-# CONFIG_CAN_ISOTP is not set
-# CONFIG_CAN_J1939 is not set
-# CONFIG_CAN_KVASER_PCIEFD is not set
-# CONFIG_CAN_MCBA_USB is not set
-# CONFIG_CAN_MCP251XFD is not set
-# CONFIG_CAN_M_CAN is not set
-# CONFIG_CAN_PEAK_PCIEFD is not set
-# CONFIG_CAN_RAW is not set
-# CONFIG_CAN_RCAR is not set
-# CONFIG_CAN_RCAR_CANFD is not set
-# CONFIG_CAN_SLCAN is not set
-# CONFIG_CAN_SUN4I is not set
-# CONFIG_CAN_UCAN is not set
-# CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_VXCAN is not set
-# CONFIG_CAPI_AVM is not set
-# CONFIG_CAPI_EICON is not set
-# CONFIG_CAPI_TRACE is not set
-CONFIG_CARDBUS=y
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_CARL9170 is not set
-# CONFIG_CASSINI is not set
-# CONFIG_CAVIUM_CPT is not set
-# CONFIG_CAVIUM_ERRATUM_22375 is not set
-# CONFIG_CAVIUM_ERRATUM_23144 is not set
-# CONFIG_CAVIUM_ERRATUM_23154 is not set
-# CONFIG_CAVIUM_ERRATUM_27456 is not set
-# CONFIG_CAVIUM_ERRATUM_30115 is not set
-# CONFIG_CAVIUM_OCTEON_SOC is not set
-# CONFIG_CAVIUM_PTP is not set
-# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_CC10001_ADC is not set
-# CONFIG_CCS811 is not set
-CONFIG_CC_CAN_LINK=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CEPH_LIB is not set
-# CONFIG_CFG80211 is not set
-# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_CHARGER_ADP5061 is not set
-# CONFIG_CHARGER_BD99954 is not set
-# CONFIG_CHARGER_BQ2415X is not set
-# CONFIG_CHARGER_BQ24190 is not set
-# CONFIG_CHARGER_BQ24257 is not set
-# CONFIG_CHARGER_BQ24735 is not set
-# CONFIG_CHARGER_BQ2515X is not set
-# CONFIG_CHARGER_BQ25890 is not set
-# CONFIG_CHARGER_BQ25980 is not set
-# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
-# CONFIG_CHARGER_GPIO is not set
-# CONFIG_CHARGER_ISP1704 is not set
-# CONFIG_CHARGER_LP8727 is not set
-# CONFIG_CHARGER_LT3651 is not set
-# CONFIG_CHARGER_LTC3651 is not set
-# CONFIG_CHARGER_MANAGER is not set
-# CONFIG_CHARGER_MAX8903 is not set
-# CONFIG_CHARGER_RT9455 is not set
-# CONFIG_CHARGER_SBS is not set
-# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHARGER_TWL4030 is not set
-# CONFIG_CHARGER_UCS1002 is not set
-# CONFIG_CHASH_SELFTEST is not set
-# CONFIG_CHASH_STATS is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_CHELSIO_T4VF is not set
-# CONFIG_CHROME_PLATFORMS is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_CIFS is not set
-# CONFIG_CIFS_ACL is not set
-CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
-# CONFIG_CIFS_DEBUG is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_FSCACHE is not set
-# CONFIG_CIFS_NFSD_EXPORT is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_SMB2 is not set
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_STATS2 is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-CONFIG_CIFS_XATTR=y
-# CONFIG_CIO_DAC is not set
-# CONFIG_CLEANCACHE is not set
-# CONFIG_CLKSRC_VERSATILE is not set
-# CONFIG_CLK_HSDK is not set
-# CONFIG_CLK_QORIQ is not set
-# CONFIG_CLOCK_THERMAL is not set
-CONFIG_CLS_U32_MARK=y
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CM32181 is not set
-# CONFIG_CM3232 is not set
-# CONFIG_CM3323 is not set
-# CONFIG_CM3605 is not set
-# CONFIG_CM36651 is not set
-# CONFIG_CMA is not set
-CONFIG_CMDLINE=""
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_CMDLINE_EXTEND is not set
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
-# CONFIG_CMDLINE_PARTITION is not set
-# CONFIG_CNIC is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_COMEDI is not set
-# CONFIG_COMMON_CLK_CDCE706 is not set
-# CONFIG_COMMON_CLK_CDCE925 is not set
-# CONFIG_COMMON_CLK_CS2000_CP is not set
-# CONFIG_COMMON_CLK_FIXED_MMIO is not set
-# CONFIG_COMMON_CLK_IPROC is not set
-# CONFIG_COMMON_CLK_MAX9485 is not set
-# CONFIG_COMMON_CLK_MT6765 is not set
-# CONFIG_COMMON_CLK_MT8167 is not set
-# CONFIG_COMMON_CLK_MT8167_AUDSYS is not set
-# CONFIG_COMMON_CLK_MT8167_IMGSYS is not set
-# CONFIG_COMMON_CLK_MT8167_MFGCFG is not set
-# CONFIG_COMMON_CLK_MT8167_MMSYS is not set
-# CONFIG_COMMON_CLK_MT8167_VDECSYS is not set
-# CONFIG_COMMON_CLK_NXP is not set
-# CONFIG_COMMON_CLK_PIC32 is not set
-# CONFIG_COMMON_CLK_PWM is not set
-# CONFIG_COMMON_CLK_PXA is not set
-# CONFIG_COMMON_CLK_QCOM is not set
-# CONFIG_COMMON_CLK_SI514 is not set
-# CONFIG_COMMON_CLK_SI5341 is not set
-# CONFIG_COMMON_CLK_SI5351 is not set
-# CONFIG_COMMON_CLK_SI544 is not set
-# CONFIG_COMMON_CLK_SI570 is not set
-# CONFIG_COMMON_CLK_VC5 is not set
-# CONFIG_COMMON_CLK_XGENE is not set
-# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
-CONFIG_COMPACTION=y
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_COMPAT is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_COMPILE_TEST is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
-CONFIG_CONSOLE_LOGLEVEL_QUIET=4
-CONFIG_CONSTRUCTORS=y
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_COPS is not set
-# CONFIG_CORDIC is not set
-# CONFIG_COREDUMP is not set
-# CONFIG_CORESIGHT is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_CORTINA_PHY is not set
-# CONFIG_COUNTER is not set
-# CONFIG_CPA_DEBUG is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_THERMAL is not set
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND is not set
-# CONFIG_CPU_IDLE is not set
-# CONFIG_CPU_IDLE_GOV_LADDER is not set
-# CONFIG_CPU_IDLE_GOV_MENU is not set
-# CONFIG_CPU_IDLE_GOV_TEO is not set
-# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
-# CONFIG_CPU_ISOLATION is not set
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_NO_EFFICIENT_FFS is not set
-CONFIG_CPU_SW_DOMAIN_PAN=y
-# CONFIG_CPU_THERMAL is not set
-# CONFIG_CRAMFS is not set
-CONFIG_CRAMFS_BLOCKDEV=y
-# CONFIG_CRAMFS_MTD is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_CRC32_BIT is not set
-CONFIG_CRC32_SARWATE=y
-# CONFIG_CRC32_SELFTEST is not set
-# CONFIG_CRC32_SLICEBY4 is not set
-# CONFIG_CRC32_SLICEBY8 is not set
-# CONFIG_CRC4 is not set
-# CONFIG_CRC64 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_CRC8 is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CROSS_COMPILE=""
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_842 is not set
-CONFIG_CRYPTO_ACOMP2=y
-# CONFIG_CRYPTO_ADIANTUM is not set
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-# CONFIG_CRYPTO_AEGIS128 is not set
-# CONFIG_CRYPTO_AEGIS128L is not set
-# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set
-# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
-# CONFIG_CRYPTO_AEGIS256 is not set
-# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
-# CONFIG_CRYPTO_AES_ARM is not set
-# CONFIG_CRYPTO_AES_ARM64 is not set
-# CONFIG_CRYPTO_AES_ARM64_BS is not set
-# CONFIG_CRYPTO_AES_ARM64_CE is not set
-# CONFIG_CRYPTO_AES_ARM64_CE_BLK is not set
-# CONFIG_CRYPTO_AES_ARM64_CE_CCM is not set
-# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
-# CONFIG_CRYPTO_AES_ARM_BS is not set
-# CONFIG_CRYPTO_AES_ARM_CE is not set
-# CONFIG_CRYPTO_AES_NI_INTEL is not set
-# CONFIG_CRYPTO_AES_TI is not set
-CONFIG_CRYPTO_AKCIPHER=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_BLAKE2B is not set
-# CONFIG_CRYPTO_BLAKE2S is not set
-# CONFIG_CRYPTO_BLAKE2S_ARM is not set
-# CONFIG_CRYPTO_BLAKE2S_X86 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_CCM=y
-# CONFIG_CRYPTO_CFB is not set
-# CONFIG_CRYPTO_CHACHA20 is not set
-# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
-# CONFIG_CRYPTO_CHACHA20_NEON is not set
-# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
-# CONFIG_CRYPTO_CHACHA_MIPS is not set
-# CONFIG_CRYPTO_CMAC is not set
-# CONFIG_CRYPTO_CRC32 is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
-# CONFIG_CRYPTO_CRC32_ARM_CE is not set
-# CONFIG_CRYPTO_CRCT10DIF is not set
-# CONFIG_CRYPTO_CRCT10DIF_ARM64_CE is not set
-# CONFIG_CRYPTO_CRCT10DIF_ARM_CE is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_CTR=y
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_CURVE25519 is not set
-# CONFIG_CRYPTO_CURVE25519_NEON is not set
-# CONFIG_CRYPTO_CURVE25519_X86 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
-# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
-# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
-# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
-# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
-# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
-# CONFIG_CRYPTO_DEV_CCP is not set
-# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
-# CONFIG_CRYPTO_DEV_CCREE is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_HISI_SEC is not set
-# CONFIG_CRYPTO_DEV_HISI_ZIP is not set
-# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
-# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
-# CONFIG_CRYPTO_DEV_MEDIATEK is not set
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_MXC_SCC is not set
-# CONFIG_CRYPTO_DEV_MXS_DCP is not set
-# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
-# CONFIG_CRYPTO_DEV_OCTEONTX_CPT is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
-# CONFIG_CRYPTO_DEV_QAT_C62X is not set
-# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
-# CONFIG_CRYPTO_DEV_QCE is not set
-# CONFIG_CRYPTO_DEV_S5P is not set
-# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
-# CONFIG_CRYPTO_DEV_SAHARA is not set
-# CONFIG_CRYPTO_DEV_SP_PSP is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_CRYPTO_DEV_VIRTIO is not set
-# CONFIG_CRYPTO_DH is not set
-# CONFIG_CRYPTO_DRBG_CTR is not set
-# CONFIG_CRYPTO_DRBG_HASH is not set
-# CONFIG_CRYPTO_DRBG_MENU is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_ECDH is not set
-# CONFIG_CRYPTO_ECHAINIV is not set
-# CONFIG_CRYPTO_ECRDSA is not set
-# CONFIG_CRYPTO_ESSIV is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_GHASH=y
-# CONFIG_CRYPTO_GHASH_ARM64_CE is not set
-# CONFIG_CRYPTO_GHASH_ARM_CE is not set
-# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_HW is not set
-# CONFIG_CRYPTO_JITTERENTROPY is not set
-# CONFIG_CRYPTO_KEYWRAP is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-CONFIG_CRYPTO_KPP=y
-CONFIG_CRYPTO_KPP2=y
-CONFIG_CRYPTO_LIB_AES=y
-CONFIG_CRYPTO_LIB_ARC4=y
-# CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC is not set
-# CONFIG_CRYPTO_LIB_CHACHA is not set
-# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
-# CONFIG_CRYPTO_LIB_CURVE25519 is not set
-# CONFIG_CRYPTO_LIB_POLY1305 is not set
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_LZ4 is not set
-# CONFIG_CRYPTO_LZ4HC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-# CONFIG_CRYPTO_MCRYPTD is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_MORUS1280 is not set
-# CONFIG_CRYPTO_MORUS1280_AVX2 is not set
-# CONFIG_CRYPTO_MORUS1280_SSE2 is not set
-# CONFIG_CRYPTO_MORUS640 is not set
-# CONFIG_CRYPTO_MORUS640_SSE2 is not set
-# CONFIG_CRYPTO_NHPOLY1305_NEON is not set
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-# CONFIG_CRYPTO_OFB is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_PCOMP is not set
-# CONFIG_CRYPTO_PCOMP2 is not set
-CONFIG_CRYPTO_PCRYPT=y
-# CONFIG_CRYPTO_POLY1305 is not set
-# CONFIG_CRYPTO_POLY1305_ARM is not set
-# CONFIG_CRYPTO_POLY1305_MIPS is not set
-# CONFIG_CRYPTO_POLY1305_NEON is not set
-# CONFIG_CRYPTO_POLY1305_X86_64 is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_RNG is not set
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SALSA20_586 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA1_ARM is not set
-# CONFIG_CRYPTO_SHA1_ARM64_CE is not set
-# CONFIG_CRYPTO_SHA1_ARM_CE is not set
-# CONFIG_CRYPTO_SHA1_ARM_NEON is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA256_ARM is not set
-# CONFIG_CRYPTO_SHA256_ARM64 is not set
-# CONFIG_CRYPTO_SHA2_ARM64_CE is not set
-# CONFIG_CRYPTO_SHA2_ARM_CE is not set
-# CONFIG_CRYPTO_SHA3 is not set
-# CONFIG_CRYPTO_SHA3_ARM64 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_SHA512_ARM is not set
-# CONFIG_CRYPTO_SHA512_ARM64 is not set
-# CONFIG_CRYPTO_SHA512_ARM64_CE is not set
-# CONFIG_CRYPTO_SIMD is not set
-CONFIG_CRYPTO_SKCIPHER=y
-CONFIG_CRYPTO_SKCIPHER2=y
-# CONFIG_CRYPTO_SM2 is not set
-# CONFIG_CRYPTO_SM3 is not set
-# CONFIG_CRYPTO_SM3_ARM64_CE is not set
-# CONFIG_CRYPTO_SM4 is not set
-# CONFIG_CRYPTO_SM4_ARM64_CE is not set
-# CONFIG_CRYPTO_SPECK is not set
-# CONFIG_CRYPTO_STATS is not set
-# CONFIG_CRYPTO_STREEBOG is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-# CONFIG_CRYPTO_TWOFISH_COMMON is not set
-# CONFIG_CRYPTO_USER is not set
-# CONFIG_CRYPTO_USER_API_AEAD is not set
-# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
-# CONFIG_CRYPTO_USER_API_HASH is not set
-# CONFIG_CRYPTO_USER_API_RNG is not set
-# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
-# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-# CONFIG_CRYPTO_VMAC is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_XXHASH is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_ZSTD is not set
-# CONFIG_CS5535_MFGPT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
-# CONFIG_CUSE is not set
-# CONFIG_CW1200 is not set
-# CONFIG_CXD2880_SPI_DRV is not set
-# CONFIG_CXL_AFU_DRIVER_OPS is not set
-# CONFIG_CXL_BASE is not set
-# CONFIG_CXL_EEH is not set
-# CONFIG_CXL_KERNEL_API is not set
-# CONFIG_CXL_LIB is not set
-# CONFIG_CYPRESS_FIRMWARE is not set
-# CONFIG_DA280 is not set
-# CONFIG_DA311 is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_DAX is not set
-# CONFIG_DCB is not set
-# CONFIG_DDR is not set
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_EFI is not set
-# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_FS_ALLOW_ALL=y
-# CONFIG_DEBUG_FS_ALLOW_NONE is not set
-# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_INFO_BTF is not set
-# CONFIG_DEBUG_INFO_COMPRESSED is not set
-# CONFIG_DEBUG_INFO_DWARF4 is not set
-# CONFIG_DEBUG_INFO_SPLIT is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_KOBJECT_RELEASE is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_LL_UART_8250 is not set
-# CONFIG_DEBUG_LL_UART_PL01X is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_MISC is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUG_PAGE_REF is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_DEBUG_PINCTRL is not set
-# CONFIG_DEBUG_PI_LIST is not set
-# CONFIG_DEBUG_PLIST is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RODATA_TEST is not set
-# CONFIG_DEBUG_RSEQ is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-# CONFIG_DEBUG_SEMIHOSTING is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
-# CONFIG_DEBUG_TIMEKEEPING is not set
-# CONFIG_DEBUG_UART_8250_PALMCHIP is not set
-# CONFIG_DEBUG_UART_8250_WORD is not set
-# CONFIG_DEBUG_UART_BCM63XX is not set
-# CONFIG_DEBUG_UART_FLOW_CONTROL is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VM_PGTABLE is not set
-# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
-# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
-# CONFIG_DEBUG_WX is not set
-# CONFIG_DEBUG_ZBOOT is not set
-# CONFIG_DECNET is not set
-# CONFIG_DEFAULT_CODEL is not set
-CONFIG_DEFAULT_CUBIC=y
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_FQ is not set
-CONFIG_DEFAULT_FQ_CODEL=y
-# CONFIG_DEFAULT_FQ_PIE is not set
-CONFIG_DEFAULT_HOSTNAME="(none)"
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
-CONFIG_DEFAULT_INIT=""
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_DEFAULT_NET_SCH="fq_codel"
-# CONFIG_DEFAULT_NOOP is not set
-# CONFIG_DEFAULT_PFIFO_FAST is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_DEFAULT_SECURITY_DAC=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SFQ is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
-# CONFIG_DELL_LAPTOP is not set
-# CONFIG_DELL_RBTN is not set
-# CONFIG_DELL_SMBIOS is not set
-# CONFIG_DELL_SMO8800 is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_DEVMEM is not set
-CONFIG_DEVPORT=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_DEVTMPFS is not set
-# CONFIG_DEVTMPFS_MOUNT is not set
-# CONFIG_DEV_DAX is not set
-# CONFIG_DGAP is not set
-# CONFIG_DGNC is not set
-# CONFIG_DHT11 is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
-# CONFIG_DISPLAY_CONNECTOR_DVI is not set
-# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
-# CONFIG_DISPLAY_ENCODER_TFP410 is not set
-# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
-# CONFIG_DISPLAY_PANEL_DPI is not set
-# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_DL2K is not set
-# CONFIG_DLHL60D is not set
-# CONFIG_DLM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_DMABUF_HEAPS is not set
-# CONFIG_DMABUF_MOVE_NOTIFY is not set
-# CONFIG_DMABUF_SELFTESTS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_DMADEVICES_DEBUG is not set
-# CONFIG_DMARD06 is not set
-# CONFIG_DMARD09 is not set
-# CONFIG_DMARD10 is not set
-# CONFIG_DMASCC is not set
-# CONFIG_DMATEST is not set
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_DMA_COHERENT_POOL=y
-CONFIG_DMA_DECLARE_COHERENT=y
-# CONFIG_DMA_ENGINE is not set
-# CONFIG_DMA_FENCE_TRACE is not set
-# CONFIG_DMA_JZ4780 is not set
-CONFIG_DMA_NONCOHERENT_MMAP=y
-# CONFIG_DMA_NOOP_OPS is not set
-# CONFIG_DMA_PERNUMA_CMA is not set
-# CONFIG_DMA_SHARED_BUFFER is not set
-# CONFIG_DMA_VIRT_OPS is not set
-# CONFIG_DM_CACHE is not set
-# CONFIG_DM_CLONE is not set
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_DUST is not set
-# CONFIG_DM_EBS is not set
-# CONFIG_DM_ERA is not set
-# CONFIG_DM_FLAKEY is not set
-# CONFIG_DM_INTEGRITY is not set
-# CONFIG_DM_LOG_USERSPACE is not set
-# CONFIG_DM_LOG_WRITES is not set
-# CONFIG_DM_MQ_DEFAULT is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_RAID is not set
-# CONFIG_DM_SWITCH is not set
-# CONFIG_DM_THIN_PROVISIONING is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_DM_UNSTRIPED is not set
-# CONFIG_DM_VERITY is not set
-# CONFIG_DM_WRITECACHE is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DNET is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_DNS_RESOLVER is not set
-CONFIG_DOUBLEFAULT=y
-# CONFIG_DP83822_PHY is not set
-# CONFIG_DP83848_PHY is not set
-# CONFIG_DP83867_PHY is not set
-# CONFIG_DP83869_PHY is not set
-# CONFIG_DP83TC811_PHY is not set
-# CONFIG_DPOT_DAC is not set
-# CONFIG_DPS310 is not set
-CONFIG_DQL=y
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_DRM is not set
-# CONFIG_DRM_AMDGPU is not set
-# CONFIG_DRM_AMDGPU_CIK is not set
-# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
-# CONFIG_DRM_AMDGPU_SI is not set
-# CONFIG_DRM_AMDGPU_USERPTR is not set
-# CONFIG_DRM_AMD_ACP is not set
-# CONFIG_DRM_AMD_DC_DCN2_0 is not set
-# CONFIG_DRM_AMD_DC_DCN3_0 is not set
-# CONFIG_DRM_AMD_DC_HDCP is not set
-# CONFIG_DRM_AMD_DC_SI is not set
-# CONFIG_DRM_ANALOGIX_ANX6345 is not set
-# CONFIG_DRM_ANALOGIX_ANX78XX is not set
-# CONFIG_DRM_ARCPGU is not set
-# CONFIG_DRM_ARMADA is not set
-# CONFIG_DRM_AST is not set
-# CONFIG_DRM_BOCHS is not set
-# CONFIG_DRM_CDNS_DSI is not set
-# CONFIG_DRM_CDNS_MHDP8546 is not set
-# CONFIG_DRM_CHRONTEL_CH7033 is not set
-# CONFIG_DRM_CIRRUS_QEMU is not set
-# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
-# CONFIG_DRM_DEBUG_MM is not set
-# CONFIG_DRM_DEBUG_SELFTEST is not set
-# CONFIG_DRM_DISPLAY_CONNECTOR is not set
-# CONFIG_DRM_DP_AUX_CHARDEV is not set
-# CONFIG_DRM_DP_CEC is not set
-# CONFIG_DRM_DUMB_VGA_DAC is not set
-# CONFIG_DRM_DW_HDMI_CEC is not set
-# CONFIG_DRM_ETNAVIV is not set
-# CONFIG_DRM_EXYNOS is not set
-# CONFIG_DRM_FBDEV_EMULATION is not set
-# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
-# CONFIG_DRM_FSL_DCU is not set
-# CONFIG_DRM_GM12U320 is not set
-# CONFIG_DRM_GMA500 is not set
-# CONFIG_DRM_HDLCD is not set
-# CONFIG_DRM_HISI_HIBMC is not set
-# CONFIG_DRM_HISI_KIRIN is not set
-# CONFIG_DRM_I2C_ADV7511 is not set
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_NXP_TDA9950 is not set
-# CONFIG_DRM_I2C_NXP_TDA998X is not set
-# CONFIG_DRM_I2C_SIL164 is not set
-# CONFIG_DRM_I915 is not set
-# CONFIG_DRM_KOMEDA is not set
-# CONFIG_DRM_LEGACY is not set
-# CONFIG_DRM_LIB_RANDOM is not set
-# CONFIG_DRM_LIMA is not set
-# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
-# CONFIG_DRM_LONTIUM_LT9611 is not set
-# CONFIG_DRM_LVDS_CODEC is not set
-# CONFIG_DRM_LVDS_ENCODER is not set
-# CONFIG_DRM_MALI_DISPLAY is not set
-# CONFIG_DRM_MCDE is not set
-# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
-# CONFIG_DRM_MGAG200 is not set
-# CONFIG_DRM_MXSFB is not set
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_DRM_NWL_MIPI_DSI is not set
-# CONFIG_DRM_NXP_PTN3460 is not set
-# CONFIG_DRM_OMAP is not set
-# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
-# CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
-# CONFIG_DRM_PANEL_BOE_HIMAX8279D is not set
-# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set
-# CONFIG_DRM_PANEL_ELIDA_KD35T133 is not set
-# CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02 is not set
-# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set
-# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
-# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set
-# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
-# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
-# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set
-# CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W is not set
-# CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829 is not set
-# CONFIG_DRM_PANEL_LG_LB035Q02 is not set
-# CONFIG_DRM_PANEL_LG_LG4573 is not set
-# CONFIG_DRM_PANEL_LVDS is not set
-# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
-# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set
-# CONFIG_DRM_PANEL_NOVATEK_NT35510 is not set
-# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set
-# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
-# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set
-# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set
-# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
-# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
-# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
-# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
-# CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set
-# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
-# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
-# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
-# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
-# CONFIG_DRM_PANEL_SIMPLE is not set
-# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
-# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
-# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
-# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
-# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
-# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set
-# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_DRM_PANEL_TPO_TPG110 is not set
-# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_VISIONOX_RM69299 is not set
-# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
-# CONFIG_DRM_PANFROST is not set
-# CONFIG_DRM_PARADE_PS8622 is not set
-# CONFIG_DRM_PARADE_PS8640 is not set
-# CONFIG_DRM_PL111 is not set
-# CONFIG_DRM_QXL is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_RADEON_USERPTR is not set
-# CONFIG_DRM_RCAR_DW_HDMI is not set
-# CONFIG_DRM_RCAR_LVDS is not set
-# CONFIG_DRM_SII902X is not set
-# CONFIG_DRM_SII9234 is not set
-# CONFIG_DRM_SIL_SII8620 is not set
-# CONFIG_DRM_SIMPLE_BRIDGE is not set
-# CONFIG_DRM_STI is not set
-# CONFIG_DRM_STM is not set
-# CONFIG_DRM_SUN4I is not set
-# CONFIG_DRM_THINE_THC63LVD1024 is not set
-# CONFIG_DRM_TIDSS is not set
-# CONFIG_DRM_TILCDC is not set
-# CONFIG_DRM_TINYDRM is not set
-# CONFIG_DRM_TI_SN65DSI86 is not set
-# CONFIG_DRM_TI_TFP410 is not set
-# CONFIG_DRM_TI_TPD12S015 is not set
-# CONFIG_DRM_TOSHIBA_TC358762 is not set
-# CONFIG_DRM_TOSHIBA_TC358764 is not set
-# CONFIG_DRM_TOSHIBA_TC358767 is not set
-# CONFIG_DRM_TOSHIBA_TC358768 is not set
-# CONFIG_DRM_TOSHIBA_TC358775 is not set
-# CONFIG_DRM_TVE200 is not set
-# CONFIG_DRM_UDL is not set
-# CONFIG_DRM_VBOXVIDEO is not set
-# CONFIG_DRM_VC4_HDMI_CEC is not set
-# CONFIG_DRM_VGEM is not set
-# CONFIG_DRM_VIRTIO_GPU is not set
-# CONFIG_DRM_VKMS is not set
-# CONFIG_DRM_VMWGFX is not set
-# CONFIG_DRM_XEN is not set
-# CONFIG_DS1682 is not set
-# CONFIG_DS1803 is not set
-# CONFIG_DS4424 is not set
-# CONFIG_DST_CACHE is not set
-# CONFIG_DTLK is not set
-# CONFIG_DUMMY is not set
-CONFIG_DUMMY_CONSOLE_COLUMNS=80
-CONFIG_DUMMY_CONSOLE_ROWS=25
-# CONFIG_DUMMY_IRQ is not set
-# CONFIG_DVB_A8293 is not set
-# CONFIG_DVB_AF9013 is not set
-# CONFIG_DVB_AF9033 is not set
-# CONFIG_DVB_AS102 is not set
-# CONFIG_DVB_ASCOT2E is not set
-# CONFIG_DVB_ATBM8830 is not set
-# CONFIG_DVB_AU8522_DTV is not set
-# CONFIG_DVB_AU8522_V4L is not set
-# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_CX24117 is not set
-# CONFIG_DVB_CX24120 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_CXD2099 is not set
-# CONFIG_DVB_CXD2820R is not set
-# CONFIG_DVB_CXD2841ER is not set
-# CONFIG_DVB_CXD2880 is not set
-# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_DIB8000 is not set
-# CONFIG_DVB_DIB9000 is not set
-# CONFIG_DVB_DRX39XYJ is not set
-# CONFIG_DVB_DRXD is not set
-# CONFIG_DVB_DRXK is not set
-# CONFIG_DVB_DS3000 is not set
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-# CONFIG_DVB_EC100 is not set
-# CONFIG_DVB_FIREDTV is not set
-# CONFIG_DVB_HELENE is not set
-# CONFIG_DVB_HORUS3A is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_ISL6423 is not set
-# CONFIG_DVB_IX2505V is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_LG2160 is not set
-# CONFIG_DVB_LGDT3305 is not set
-# CONFIG_DVB_LGDT3306A is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGS8GL5 is not set
-# CONFIG_DVB_LGS8GXX is not set
-# CONFIG_DVB_LNBH25 is not set
-# CONFIG_DVB_LNBH29 is not set
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_LNBP22 is not set
-# CONFIG_DVB_M88DS3103 is not set
-# CONFIG_DVB_M88RS2000 is not set
-CONFIG_DVB_MAX_ADAPTERS=16
-# CONFIG_DVB_MB86A16 is not set
-# CONFIG_DVB_MB86A20S is not set
-# CONFIG_DVB_MMAP is not set
-# CONFIG_DVB_MN88443X is not set
-# CONFIG_DVB_MN88472 is not set
-# CONFIG_DVB_MN88473 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_MXL5XX is not set
-# CONFIG_DVB_NET is not set
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_PLATFORM_DRIVERS is not set
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_RTL2830 is not set
-# CONFIG_DVB_RTL2832 is not set
-# CONFIG_DVB_RTL2832_SDR is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_S5H1411 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_S5H1432 is not set
-# CONFIG_DVB_S921 is not set
-# CONFIG_DVB_SI2165 is not set
-# CONFIG_DVB_SI2168 is not set
-# CONFIG_DVB_SI21XX is not set
-# CONFIG_DVB_SP2 is not set
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STB6100 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STV0297 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_STV0367 is not set
-# CONFIG_DVB_STV0900 is not set
-# CONFIG_DVB_STV090x is not set
-# CONFIG_DVB_STV0910 is not set
-# CONFIG_DVB_STV6110 is not set
-# CONFIG_DVB_STV6110x is not set
-# CONFIG_DVB_STV6111 is not set
-# CONFIG_DVB_TC90522 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_TDA10048 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_TDA10071 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA18271C2DD is not set
-# CONFIG_DVB_TDA665x is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TEST_DRIVERS is not set
-# CONFIG_DVB_TS2020 is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_ULE_DEBUG is not set
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_USB_V2 is not set
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_ZD1301_DEMOD is not set
-# CONFIG_DVB_ZL10036 is not set
-# CONFIG_DVB_ZL10039 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DWC_XLGMAC is not set
-# CONFIG_DWMAC_DWC_QOS_ETH is not set
-# CONFIG_DWMAC_INTEL_PLAT is not set
-# CONFIG_DWMAC_IPQ806X is not set
-# CONFIG_DWMAC_LPC18XX is not set
-# CONFIG_DWMAC_MESON is not set
-# CONFIG_DWMAC_ROCKCHIP is not set
-# CONFIG_DWMAC_SOCFPGA is not set
-# CONFIG_DWMAC_STI is not set
-# CONFIG_DW_AXI_DMAC is not set
-# CONFIG_DW_DMAC is not set
-# CONFIG_DW_DMAC_PCI is not set
-# CONFIG_DW_EDMA is not set
-# CONFIG_DW_EDMA_PCIE is not set
-# CONFIG_DW_WATCHDOG is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DYNAMIC_DEBUG_CORE is not set
-# CONFIG_E100 is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_HWTS is not set
-# CONFIG_EARLY_PRINTK_8250 is not set
-# CONFIG_EARLY_PRINTK_USB_XDBC is not set
-# CONFIG_EBC_C384_WDT is not set
-# CONFIG_ECHO is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_EDAC is not set
-# CONFIG_EEEPC_LAPTOP is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_93XX46 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_DIGSY_MTC_CFG is not set
-# CONFIG_EEPROM_EE1004 is not set
-# CONFIG_EEPROM_IDT_89HPESX is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EFI is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_EFI_VARS_PSTORE is not set
-# CONFIG_EFS_FS is not set
-CONFIG_ELFCORE=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_EMAC_ROCKCHIP is not set
-CONFIG_EMBEDDED=y
-# CONFIG_EM_TIMER_STI is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENA_ETHERNET is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ENCRYPTED_KEYS is not set
-# CONFIG_ENCX24J600 is not set
-# CONFIG_ENERGY_MODEL is not set
-# CONFIG_ENIC is not set
-# CONFIG_ENVELOPE_DETECTOR is not set
-# CONFIG_EPAPR_PARAVIRT is not set
-# CONFIG_EPIC100 is not set
-CONFIG_EPOLL=y
-# CONFIG_EQUALIZER is not set
-# CONFIG_EROFS_FS is not set
-# CONFIG_ET131X is not set
-CONFIG_ETHERNET=y
-# CONFIG_ETHOC is not set
-CONFIG_ETHTOOL_NETLINK=y
-CONFIG_EVENTFD=y
-# CONFIG_EVM is not set
-# CONFIG_EXFAT_FS is not set
-CONFIG_EXPERT=y
-CONFIG_EXPORTFS=y
-# CONFIG_EXPORTFS_BLOCK_OPS is not set
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_DEBUG is not set
-# CONFIG_EXT4_ENCRYPTION is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_EXT4_USE_FOR_EXT2=y
-# CONFIG_EXTCON is not set
-# CONFIG_EXTCON_ADC_JACK is not set
-# CONFIG_EXTCON_ARIZONA is not set
-# CONFIG_EXTCON_AXP288 is not set
-# CONFIG_EXTCON_FSA9480 is not set
-# CONFIG_EXTCON_GPIO is not set
-# CONFIG_EXTCON_INTEL_INT3496 is not set
-# CONFIG_EXTCON_MAX3355 is not set
-# CONFIG_EXTCON_PTN5150 is not set
-# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
-# CONFIG_EXTCON_RT8973A is not set
-# CONFIG_EXTCON_SM5502 is not set
-# CONFIG_EXTCON_USB_GPIO is not set
-CONFIG_EXTRA_FIRMWARE=""
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_EXYNOS_ADC is not set
-# CONFIG_EXYNOS_VIDEO is not set
-# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_F2FS_CHECK_FS is not set
-# CONFIG_F2FS_FAULT_INJECTION is not set
-# CONFIG_F2FS_FS is not set
-# CONFIG_F2FS_FS_COMPRESSION is not set
-# CONFIG_F2FS_FS_ENCRYPTION is not set
-# CONFIG_F2FS_FS_POSIX_ACL is not set
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-# CONFIG_F2FS_IO_TRACE is not set
-CONFIG_F2FS_STAT_FS=y
-# CONFIG_FAILOVER is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_FANOTIFY is not set
-# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_FAT_DEFAULT_UTF8 is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_FB is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_AUO_K190X is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_BOTH_ENDIAN is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_DA8XX is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_FLEX is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_FSL_DIU is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_I740 is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_IMX is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_MXS is not set
-# CONFIG_FB_N411 is not set
-# CONFIG_FB_NEOMAGIC is not set
-CONFIG_FB_NOTIFY=y
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_OMAP2 is not set
-# CONFIG_FB_OPENCORES is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_PS3 is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIMPLE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_SM712 is not set
-# CONFIG_FB_SM750 is not set
-# CONFIG_FB_SMSCUFX is not set
-# CONFIG_FB_SSD1307 is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_TFT is not set
-# CONFIG_FB_TFT_AGM1264K_FL is not set
-# CONFIG_FB_TFT_BD663474 is not set
-# CONFIG_FB_TFT_FBTFT_DEVICE is not set
-# CONFIG_FB_TFT_HX8340BN is not set
-# CONFIG_FB_TFT_HX8347D is not set
-# CONFIG_FB_TFT_HX8353D is not set
-# CONFIG_FB_TFT_HX8357D is not set
-# CONFIG_FB_TFT_ILI9163 is not set
-# CONFIG_FB_TFT_ILI9320 is not set
-# CONFIG_FB_TFT_ILI9325 is not set
-# CONFIG_FB_TFT_ILI9340 is not set
-# CONFIG_FB_TFT_ILI9341 is not set
-# CONFIG_FB_TFT_ILI9481 is not set
-# CONFIG_FB_TFT_ILI9486 is not set
-# CONFIG_FB_TFT_PCD8544 is not set
-# CONFIG_FB_TFT_RA8875 is not set
-# CONFIG_FB_TFT_S6D02A1 is not set
-# CONFIG_FB_TFT_S6D1121 is not set
-# CONFIG_FB_TFT_SEPS525 is not set
-# CONFIG_FB_TFT_SH1106 is not set
-# CONFIG_FB_TFT_SSD1289 is not set
-# CONFIG_FB_TFT_SSD1305 is not set
-# CONFIG_FB_TFT_SSD1306 is not set
-# CONFIG_FB_TFT_SSD1325 is not set
-# CONFIG_FB_TFT_SSD1331 is not set
-# CONFIG_FB_TFT_SSD1351 is not set
-# CONFIG_FB_TFT_ST7735R is not set
-# CONFIG_FB_TFT_ST7789V is not set
-# CONFIG_FB_TFT_TINYLCD is not set
-# CONFIG_FB_TFT_TLS8204 is not set
-# CONFIG_FB_TFT_UC1611 is not set
-# CONFIG_FB_TFT_UC1701 is not set
-# CONFIG_FB_TFT_UPD161704 is not set
-# CONFIG_FB_TFT_WATTEROTT is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_XGI is not set
-# CONFIG_FCOE is not set
-# CONFIG_FCOE_FNIC is not set
-# CONFIG_FDDI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_FENCE_TRACE is not set
-# CONFIG_FHANDLE is not set
-CONFIG_FIB_RULES=y
-# CONFIG_FIELDBUS_DEV is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FIND_BIT_BENCHMARK is not set
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIREWIRE_NOSY is not set
-# CONFIG_FIREWIRE_SERIAL is not set
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_FIT_PARTITION is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_FLATMEM=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_FM10K is not set
-# CONFIG_FMC is not set
-# CONFIG_FONTS is not set
-# CONFIG_FONT_6x8 is not set
-# CONFIG_FONT_TER16x32 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_FORTIFY_SOURCE=y
-# CONFIG_FPGA is not set
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
-# CONFIG_FRAME_POINTER is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_FREEZER is not set
-# CONFIG_FRONTSWAP is not set
-# CONFIG_FSCACHE is not set
-# CONFIG_FSI is not set
-# CONFIG_FSL_EDMA is not set
-# CONFIG_FSL_ENETC is not set
-# CONFIG_FSL_ENETC_MDIO is not set
-# CONFIG_FSL_ENETC_VF is not set
-# CONFIG_FSL_ERRATUM_A008585 is not set
-# CONFIG_FSL_MC_BUS is not set
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_FSL_QDMA is not set
-# CONFIG_FSL_RCPM is not set
-# CONFIG_FSL_XGMAC_MDIO is not set
-CONFIG_FSNOTIFY=y
-# CONFIG_FS_DAX is not set
-# CONFIG_FS_ENCRYPTION is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FS_VERITY is not set
-# CONFIG_FTGMAC100 is not set
-# CONFIG_FTL is not set
-# CONFIG_FTMAC100 is not set
-# CONFIG_FTRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_FTWDT010_WATCHDOG is not set
-# CONFIG_FUJITSU_ERRATUM_010001 is not set
-# CONFIG_FUJITSU_ES is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_FUJITSU_TABLET is not set
-# CONFIG_FUNCTION_ERROR_INJECTION is not set
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_FUSE_FS is not set
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-# CONFIG_FUSION_SPI is not set
-CONFIG_FUTEX=y
-CONFIG_FUTEX_PI=y
-# CONFIG_FW_CFG_SYSFS is not set
-CONFIG_FW_LOADER=y
-# CONFIG_FW_LOADER_COMPRESS is not set
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-# CONFIG_FXAS21002C is not set
-# CONFIG_FXOS8700_I2C is not set
-# CONFIG_FXOS8700_SPI is not set
-CONFIG_GACT_PROB=y
-# CONFIG_GADGET_UAC1 is not set
-# CONFIG_GAMEPORT is not set
-# CONFIG_GATEWORKS_GW16083 is not set
-# CONFIG_GCC_PLUGINS is not set
-# CONFIG_GCOV is not set
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_GDB_SCRIPTS is not set
-# CONFIG_GEMINI_ETHERNET is not set
-# CONFIG_GENERIC_ADC_BATTERY is not set
-# CONFIG_GENERIC_ADC_THERMAL is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_CPU_DEVICES is not set
-CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_GENERIC_IRQ_DEBUGFS is not set
-CONFIG_GENERIC_IRQ_IPI=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_NET_UTILS=y
-# CONFIG_GENERIC_PHY is not set
-CONFIG_GENERIC_PTDUMP=y
-CONFIG_GENERIC_VDSO_TIME_NS=y
-# CONFIG_GENEVE is not set
-# CONFIG_GENWQE is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_GIGASET_CAPI is not set
-# CONFIG_GIGASET_DEBUG is not set
-# CONFIG_GIGASET_DUMMYLL is not set
-# CONFIG_GLOB_SELFTEST is not set
-# CONFIG_GNSS is not set
-# CONFIG_GOLDFISH is not set
-# CONFIG_GOOGLE_COREBOOT_TABLE is not set
-# CONFIG_GOOGLE_FIRMWARE is not set
-# CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT is not set
-# CONFIG_GOOGLE_MEMCONSOLE_COREBOOT is not set
-# CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY is not set
-# CONFIG_GOOGLE_SMI is not set
-# CONFIG_GOOGLE_VPD is not set
-# CONFIG_GP2AP002 is not set
-# CONFIG_GP2AP020A00F is not set
-# CONFIG_GPD_POCKET_FAN is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_FASTPATH_LIMIT=512
-# CONFIG_GPIO_104_DIO_48E is not set
-# CONFIG_GPIO_104_IDIO_16 is not set
-# CONFIG_GPIO_104_IDI_48 is not set
-# CONFIG_GPIO_74X164 is not set
-# CONFIG_GPIO_74XX_MMIO is not set
-# CONFIG_GPIO_ADNP is not set
-# CONFIG_GPIO_ADP5588 is not set
-# CONFIG_GPIO_AGGREGATOR is not set
-# CONFIG_GPIO_ALTERA is not set
-# CONFIG_GPIO_AMD8111 is not set
-# CONFIG_GPIO_AMDPT is not set
-# CONFIG_GPIO_AMD_FCH is not set
-# CONFIG_GPIO_BCM_KONA is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_CADENCE is not set
-# CONFIG_GPIO_CASCADE is not set
-# CONFIG_GPIO_CDEV is not set
-# CONFIG_GPIO_CDEV_V1 is not set
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_DWAPB is not set
-# CONFIG_GPIO_EM is not set
-# CONFIG_GPIO_EXAR is not set
-# CONFIG_GPIO_F7188X is not set
-# CONFIG_GPIO_FTGPIO010 is not set
-# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_GPIO_MM is not set
-# CONFIG_GPIO_GRGPIO is not set
-# CONFIG_GPIO_GW_PLD is not set
-# CONFIG_GPIO_HLWD is not set
-# CONFIG_GPIO_ICH is not set
-# CONFIG_GPIO_IT87 is not set
-# CONFIG_GPIO_LOGICVC is not set
-# CONFIG_GPIO_LYNXPOINT is not set
-# CONFIG_GPIO_MAX3191X is not set
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_MB86S7X is not set
-# CONFIG_GPIO_MC33880 is not set
-# CONFIG_GPIO_ML_IOH is not set
-# CONFIG_GPIO_MOCKUP is not set
-# CONFIG_GPIO_MPC8XXX is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCA953X_IRQ is not set
-# CONFIG_GPIO_PCA9570 is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_PCH is not set
-# CONFIG_GPIO_PCIE_IDIO_24 is not set
-# CONFIG_GPIO_PCI_IDIO_16 is not set
-# CONFIG_GPIO_PISOSR is not set
-# CONFIG_GPIO_PL061 is not set
-# CONFIG_GPIO_RCAR is not set
-# CONFIG_GPIO_RDC321X is not set
-# CONFIG_GPIO_SAMA5D2_PIOBU is not set
-# CONFIG_GPIO_SCH is not set
-# CONFIG_GPIO_SCH311X is not set
-# CONFIG_GPIO_SIFIVE is not set
-# CONFIG_GPIO_SX150X is not set
-# CONFIG_GPIO_SYSCON is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GPIO_TPIC2810 is not set
-# CONFIG_GPIO_TS4900 is not set
-# CONFIG_GPIO_TS5500 is not set
-# CONFIG_GPIO_VX855 is not set
-# CONFIG_GPIO_WATCHDOG is not set
-# CONFIG_GPIO_WINBOND is not set
-# CONFIG_GPIO_WS16C48 is not set
-# CONFIG_GPIO_XGENE is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_XRA1403 is not set
-# CONFIG_GPIO_ZEVIO is not set
-# CONFIG_GPIO_ZX is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_GREYBUS is not set
-# CONFIG_GS_FPGABOOT is not set
-# CONFIG_GTP is not set
-# CONFIG_GUP_BENCHMARK is not set
-# CONFIG_GVE is not set
-# CONFIG_HABANA_AI is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_HAPPYMEAL is not set
-CONFIG_HARDENED_USERCOPY=y
-# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
-# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
-CONFIG_HARDEN_BRANCH_HISTORY=y
-CONFIG_HARDEN_EL2_VECTORS=y
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_HAVE_ARM_ARCH_TIMER is not set
-# CONFIG_HCALL_STATS is not set
-# CONFIG_HDC100X is not set
-# CONFIG_HDC2010 is not set
-# CONFIG_HDLC is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC_PPP is not set
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HDMI_LPE_AUDIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_HEADERS_INSTALL is not set
-# CONFIG_HEADER_TEST is not set
-# CONFIG_HERMES is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFS_FS_POSIX_ACL is not set
-# CONFIG_HI8435 is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_HID is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_ACCUTOUCH is not set
-# CONFIG_HID_ACRUX is not set
-# CONFIG_HID_ACRUX_FF is not set
-# CONFIG_HID_ALPS is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_APPLEIR is not set
-# CONFIG_HID_ASUS is not set
-# CONFIG_HID_AUREAL is not set
-# CONFIG_HID_BATTERY_STRENGTH is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_BETOP_FF is not set
-# CONFIG_HID_BIGBEN_FF is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CMEDIA is not set
-# CONFIG_HID_CORSAIR is not set
-# CONFIG_HID_COUGAR is not set
-# CONFIG_HID_CP2112 is not set
-# CONFIG_HID_CREATIVE_SB0540 is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_ELAN is not set
-# CONFIG_HID_ELECOM is not set
-# CONFIG_HID_ELO is not set
-# CONFIG_HID_EMS_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_GEMBIRD is not set
-# CONFIG_HID_GENERIC is not set
-# CONFIG_HID_GFRM is not set
-# CONFIG_HID_GLORIOUS is not set
-# CONFIG_HID_GOOGLE_HAMMER is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_GT683R is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_HOLTEK is not set
-# CONFIG_HID_ICADE is not set
-# CONFIG_HID_ITE is not set
-# CONFIG_HID_JABRA is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_KEYTOUCH is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_LCPOWER is not set
-# CONFIG_HID_LED is not set
-# CONFIG_HID_LENOVO is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_LOGITECH_DJ is not set
-# CONFIG_HID_LOGITECH_HIDPP is not set
-# CONFIG_HID_MACALLY is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MALTRON is not set
-# CONFIG_HID_MAYFLASH is not set
-# CONFIG_HID_MCP2221 is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_MULTITOUCH is not set
-# CONFIG_HID_NTI is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PENMOUNT is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_PID is not set
-# CONFIG_HID_PLANTRONICS is not set
-# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_PRODIKEYS is not set
-# CONFIG_HID_REDRAGON is not set
-# CONFIG_HID_RETRODE is not set
-# CONFIG_HID_RMI is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_SAITEK is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SENSOR_HUB is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SPEEDLINK is not set
-# CONFIG_HID_STEAM is not set
-# CONFIG_HID_STEELSERIES is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_THINGM is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_TIVO is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_U2FZERO is not set
-# CONFIG_HID_UCLOGIC is not set
-# CONFIG_HID_UDRAW_PS3 is not set
-# CONFIG_HID_VIEWSONIC is not set
-# CONFIG_HID_VIVALDI is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_WALTOP is not set
-# CONFIG_HID_WIIMOTE is not set
-# CONFIG_HID_XINMO is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HIGH_RES_TIMERS=y
-# CONFIG_HINIC is not set
-# CONFIG_HIP04_ETH is not set
-# CONFIG_HIPPI is not set
-# CONFIG_HISILICON_ERRATUM_161010101 is not set
-# CONFIG_HISILICON_ERRATUM_161600802 is not set
-# CONFIG_HISI_DMA is not set
-# CONFIG_HISI_FEMAC is not set
-# CONFIG_HISI_HIKEY_USB is not set
-# CONFIG_HIX5HD2_GMAC is not set
-# CONFIG_HMC425 is not set
-# CONFIG_HMC6352 is not set
-# CONFIG_HNS is not set
-# CONFIG_HNS3 is not set
-# CONFIG_HNS_DSAF is not set
-# CONFIG_HNS_ENET is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HP03 is not set
-# CONFIG_HP100 is not set
-# CONFIG_HP206C is not set
-CONFIG_HPET_MMAP_DEFAULT=y
-# CONFIG_HPFS_FS is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_HP_WIRELESS is not set
-# CONFIG_HSA_AMD is not set
-# CONFIG_HSI is not set
-# CONFIG_HSR is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTS221 is not set
-# CONFIG_HTU21 is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_HWLAT_TRACER is not set
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWSPINLOCK is not set
-# CONFIG_HWSPINLOCK_OMAP is not set
-CONFIG_HW_PERF_EVENTS=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HW_RANDOM_AMD is not set
-# CONFIG_HW_RANDOM_ATMEL is not set
-# CONFIG_HW_RANDOM_BA431 is not set
-# CONFIG_HW_RANDOM_CAVIUM is not set
-# CONFIG_HW_RANDOM_CCTRNG is not set
-# CONFIG_HW_RANDOM_EXYNOS is not set
-# CONFIG_HW_RANDOM_GEODE is not set
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
-# CONFIG_HW_RANDOM_MTK is not set
-# CONFIG_HW_RANDOM_OMAP is not set
-# CONFIG_HW_RANDOM_OMAP3_ROM is not set
-# CONFIG_HW_RANDOM_PPC4XX is not set
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_TPM=y
-# CONFIG_HW_RANDOM_VIA is not set
-# CONFIG_HW_RANDOM_VIRTIO is not set
-# CONFIG_HW_RANDOM_XIPHERA is not set
-# CONFIG_HX711 is not set
-# CONFIG_HYPERV is not set
-# CONFIG_HYPERV_TSCPAGE is not set
-# CONFIG_HYSDN is not set
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_200 is not set
-# CONFIG_HZ_24 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_500 is not set
-# CONFIG_HZ_PERIODIC is not set
-# CONFIG_I2C is not set
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCA is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
-# CONFIG_I2C_AU1550 is not set
-# CONFIG_I2C_BCM2835 is not set
-# CONFIG_I2C_BCM_IPROC is not set
-# CONFIG_I2C_BRCMSTB is not set
-# CONFIG_I2C_CADENCE is not set
-# CONFIG_I2C_CBUS_GPIO is not set
-# CONFIG_I2C_CHARDEV is not set
-# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEMUX_PINCTRL is not set
-# CONFIG_I2C_DESIGNWARE_PCI is not set
-# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
-# CONFIG_I2C_DESIGNWARE_SLAVE is not set
-# CONFIG_I2C_DIOLAN_U2C is not set
-# CONFIG_I2C_EG20T is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_EMEV2 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_HID is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_IMG is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_ISMT is not set
-# CONFIG_I2C_JZ4780 is not set
-# CONFIG_I2C_MLXCPLD is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_MT65XX is not set
-# CONFIG_I2C_MUX is not set
-# CONFIG_I2C_MUX_GPIO is not set
-# CONFIG_I2C_MUX_GPMUX is not set
-# CONFIG_I2C_MUX_LTC4306 is not set
-# CONFIG_I2C_MUX_MLXCPLD is not set
-# CONFIG_I2C_MUX_PCA9541 is not set
-# CONFIG_I2C_MUX_PCA954x is not set
-# CONFIG_I2C_MUX_PINCTRL is not set
-# CONFIG_I2C_MUX_REG is not set
-# CONFIG_I2C_MV64XXX is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_NOMADIK is not set
-# CONFIG_I2C_NVIDIA_GPU is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OCTEON is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_RCAR is not set
-# CONFIG_I2C_RK3X is not set
-# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
-# CONFIG_I2C_S3C2410 is not set
-# CONFIG_I2C_SCMI is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_SLAVE is not set
-# CONFIG_I2C_SLAVE_EEPROM is not set
-# CONFIG_I2C_SMBUS is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_THUNDERX is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VERSATILE is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_XILINX is not set
-# CONFIG_I3C is not set
-# CONFIG_I40E is not set
-# CONFIG_I40EVF is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_IAQCORE is not set
-# CONFIG_IBM_ASM is not set
-# CONFIG_IBM_EMAC_DEBUG is not set
-# CONFIG_IBM_EMAC_EMAC4 is not set
-# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_EMAC_RGMII is not set
-# CONFIG_IBM_EMAC_TAH is not set
-# CONFIG_IBM_EMAC_ZMII is not set
-# CONFIG_ICE is not set
-# CONFIG_ICP10100 is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_IDE is not set
-# CONFIG_IDEAPAD_LAPTOP is not set
-# CONFIG_IDE_GD is not set
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDLE_PAGE_TRACKING is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_IEEE802154_ADF7242 is not set
-# CONFIG_IEEE802154_ATUSB is not set
-# CONFIG_IEEE802154_CA8210 is not set
-# CONFIG_IEEE802154_HWSIM is not set
-# CONFIG_IEEE802154_MCR20A is not set
-# CONFIG_IFB is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_IGC is not set
-# CONFIG_IIO is not set
-# CONFIG_IIO_BUFFER is not set
-# CONFIG_IIO_BUFFER_CB is not set
-# CONFIG_IIO_BUFFER_DMA is not set
-# CONFIG_IIO_BUFFER_DMAENGINE is not set
-# CONFIG_IIO_BUFFER_HDC2010 is not set
-# CONFIG_IIO_BUFFER_HW_CONSUMER is not set
-# CONFIG_IIO_CONFIGFS is not set
-CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
-# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set
-# CONFIG_IIO_INTERRUPT_TRIGGER is not set
-# CONFIG_IIO_MUX is not set
-# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
-# CONFIG_IIO_RESCALE is not set
-# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_IIO_SSP_SENSORHUB is not set
-# CONFIG_IIO_ST_ACCEL_3AXIS is not set
-# CONFIG_IIO_ST_GYRO_3AXIS is not set
-# CONFIG_IIO_ST_LSM6DSX is not set
-# CONFIG_IIO_ST_MAGN_3AXIS is not set
-# CONFIG_IIO_ST_PRESS is not set
-# CONFIG_IIO_SW_DEVICE is not set
-# CONFIG_IIO_SW_TRIGGER is not set
-# CONFIG_IIO_SYSFS_TRIGGER is not set
-# CONFIG_IIO_TRIGGER is not set
-# CONFIG_IIO_TRIGGERED_EVENT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_IKCONFIG_PROC is not set
-# CONFIG_IKHEADERS is not set
-# CONFIG_IMA is not set
-# CONFIG_IMGPDC_WDT is not set
-# CONFIG_IMG_MDC_DMA is not set
-# CONFIG_IMX7D_ADC is not set
-# CONFIG_IMX_IPUV3_CORE is not set
-# CONFIG_IMX_THERMAL is not set
-# CONFIG_INA2XX_ADC is not set
-# CONFIG_INDIRECT_PIO is not set
-CONFIG_INET=y
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_ESPINTCP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_ESPINTCP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_TABLE_PERTURB_ORDER=16
-# CONFIG_INET_TCP_DIAG is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_UDP_DIAG is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_INFTL is not set
-# CONFIG_INGENIC_ADC is not set
-# CONFIG_INGENIC_CGU_JZ4725B is not set
-# CONFIG_INGENIC_CGU_JZ4740 is not set
-# CONFIG_INGENIC_CGU_JZ4770 is not set
-# CONFIG_INGENIC_CGU_JZ4780 is not set
-# CONFIG_INGENIC_CGU_X1000 is not set
-# CONFIG_INGENIC_CGU_X1830 is not set
-# CONFIG_INGENIC_OST is not set
-# CONFIG_INGENIC_SYSOST is not set
-# CONFIG_INGENIC_TCU_CLK is not set
-# CONFIG_INGENIC_TCU_IRQ is not set
-# CONFIG_INGENIC_TIMER is not set
-CONFIG_INIT_ENV_ARG_LIMIT=32
-# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
-# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
-# CONFIG_INIT_STACK_ALL_PATTERN is not set
-# CONFIG_INIT_STACK_ALL_ZERO is not set
-CONFIG_INIT_STACK_NONE=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_APANEL is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
-# CONFIG_INPUT_AXP20X_PEK is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_CMA3000 is not set
-# CONFIG_INPUT_DRV260X_HAPTICS is not set
-# CONFIG_INPUT_DRV2665_HAPTICS is not set
-# CONFIG_INPUT_DRV2667_HAPTICS is not set
-# CONFIG_INPUT_E3X0_BUTTON is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_BEEPER is not set
-# CONFIG_INPUT_GPIO_DECODER is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_INPUT_GPIO_VIBRA is not set
-# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
-# CONFIG_INPUT_IMS_PCU is not set
-# CONFIG_INPUT_IQS269A is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_LEDS is not set
-# CONFIG_INPUT_MATRIXKMAP is not set
-# CONFIG_INPUT_MAX8997_HAPTIC is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_MSM_VIBRATOR is not set
-# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_PWM_BEEPER is not set
-# CONFIG_INPUT_PWM_VIBRA is not set
-# CONFIG_INPUT_REGULATOR_HAPTIC is not set
-# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_TWL6040_VIBRA is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INT340X_THERMAL is not set
-# CONFIG_INTEGRITY is not set
-# CONFIG_INTEGRITY_AUDIT is not set
-# CONFIG_INTEGRITY_SIGNATURE is not set
-# CONFIG_INTEL_ATOMISP2_LED is not set
-# CONFIG_INTEL_ATOMISP2_PM is not set
-# CONFIG_INTEL_CHT_INT33FE is not set
-# CONFIG_INTEL_HID_EVENT is not set
-# CONFIG_INTEL_IDLE is not set
-# CONFIG_INTEL_IDMA64 is not set
-# CONFIG_INTEL_IDXD is not set
-# CONFIG_INTEL_INT0002_VGPIO is not set
-# CONFIG_INTEL_IOATDMA is not set
-# CONFIG_INTEL_ISH_HID is not set
-# CONFIG_INTEL_MEI is not set
-# CONFIG_INTEL_MEI_ME is not set
-# CONFIG_INTEL_MEI_TXE is not set
-# CONFIG_INTEL_MIC_CARD is not set
-# CONFIG_INTEL_MIC_HOST is not set
-# CONFIG_INTEL_MID_PTI is not set
-# CONFIG_INTEL_OAKTRAIL is not set
-# CONFIG_INTEL_PMC_CORE is not set
-# CONFIG_INTEL_PUNIT_IPC is not set
-# CONFIG_INTEL_RST is not set
-# CONFIG_INTEL_SMARTCONNECT is not set
-# CONFIG_INTEL_SOC_PMIC is not set
-# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
-# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
-# CONFIG_INTEL_TH is not set
-# CONFIG_INTEL_VBTN is not set
-# CONFIG_INTEL_XWAY_PHY is not set
-# CONFIG_INTERCONNECT is not set
-# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_INV_ICM42600_I2C is not set
-# CONFIG_INV_ICM42600_SPI is not set
-# CONFIG_INV_MPU6050_I2C is not set
-# CONFIG_INV_MPU6050_IIO is not set
-# CONFIG_INV_MPU6050_SPI is not set
-# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_IONIC is not set
-# CONFIG_IOSCHED_BFQ is not set
-CONFIG_IO_STRICT_DEVMEM=y
-# CONFIG_IO_URING is not set
-CONFIG_IO_WQ=y
-# CONFIG_IP17XX_PHY is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_RPFILTER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_SRH is not set
-# CONFIG_IP6_NF_NAT is not set
-# CONFIG_IP6_NF_RAW is not set
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
-# CONFIG_IPACK_BUS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_IPMB_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPV6 is not set
-# CONFIG_IPV6_FOU is not set
-# CONFIG_IPV6_FOU_TUNNEL is not set
-# CONFIG_IPV6_ILA is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_RPL_LWTUNNEL is not set
-# CONFIG_IPV6_SEG6_HMAC is not set
-# CONFIG_IPV6_SEG6_LWTUNNEL is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_SIT_6RD is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_VTI is not set
-# CONFIG_IPVLAN is not set
-# CONFIG_IPVTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2200 is not set
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_PROMISCUOUS is not set
-# CONFIG_IPW2200_QOS is not set
-# CONFIG_IPW2200_RADIOTAP is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_IPX is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_FIB_TRIE_STATS is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_RPFILTER is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_SYNPROXY is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_IP_PNP is not set
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_IP_SET is not set
-# CONFIG_IP_SET_HASH_IPMAC is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IP_VS_MH is not set
-CONFIG_IP_VS_MH_TAB_INDEX=10
-# CONFIG_IRDA is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-# CONFIG_IRQ_POLL is not set
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-# CONFIG_IR_GPIO_CIR is not set
-# CONFIG_IR_HIX5HD2 is not set
-# CONFIG_IR_IGORPLUGUSB is not set
-# CONFIG_IR_IGUANA is not set
-# CONFIG_IR_IMG is not set
-# CONFIG_IR_IMON is not set
-# CONFIG_IR_IMON_RAW is not set
-# CONFIG_IR_JVC_DECODER is not set
-# CONFIG_IR_LIRC_CODEC is not set
-# CONFIG_IR_MCEUSB is not set
-# CONFIG_IR_NEC_DECODER is not set
-# CONFIG_IR_RC5_DECODER is not set
-# CONFIG_IR_RC6_DECODER is not set
-# CONFIG_IR_REDRAT3 is not set
-# CONFIG_IR_SERIAL is not set
-# CONFIG_IR_SIR is not set
-# CONFIG_IR_SONY_DECODER is not set
-# CONFIG_IR_STREAMZAP is not set
-# CONFIG_IR_TOY is not set
-# CONFIG_IR_TTUSBIR is not set
-# CONFIG_ISA_BUS is not set
-# CONFIG_ISA_BUS_API is not set
-# CONFIG_ISCSI_BOOT_SYSFS is not set
-# CONFIG_ISCSI_TCP is not set
-CONFIG_ISDN=y
-# CONFIG_ISDN_AUDIO is not set
-# CONFIG_ISDN_CAPI is not set
-# CONFIG_ISDN_CAPI_CAPIDRV is not set
-# CONFIG_ISDN_DIVERSION is not set
-# CONFIG_ISDN_DRV_ACT2000 is not set
-# CONFIG_ISDN_DRV_GIGASET is not set
-# CONFIG_ISDN_DRV_HISAX is not set
-# CONFIG_ISDN_DRV_ICN is not set
-# CONFIG_ISDN_DRV_LOOP is not set
-# CONFIG_ISDN_DRV_PCBIT is not set
-# CONFIG_ISDN_DRV_SC is not set
-# CONFIG_ISDN_I4L is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_ISL29020 is not set
-# CONFIG_ISL29125 is not set
-# CONFIG_ISL29501 is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_ISS4xx is not set
-# CONFIG_ITG3200 is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IXGB is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGBEVF is not set
-# CONFIG_JAILHOUSE_GUEST is not set
-# CONFIG_JBD2_DEBUG is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_POSIX_ACL is not set
-# CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_LZMA=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_ZLIB is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_JME is not set
-CONFIG_JOLIET=y
-# CONFIG_JSA1212 is not set
-# CONFIG_JUMP_LABEL is not set
-# CONFIG_JZ4740_WDT is not set
-# CONFIG_JZ4770_PHY is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_KALLSYMS_BASE_RELATIVE=y
-# CONFIG_KALLSYMS_UNCOMPRESSED is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_KASAN is not set
-CONFIG_KASAN_STACK=1
-# CONFIG_KCMP is not set
-# CONFIG_KCOV is not set
-# CONFIG_KCSAN is not set
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_CAT is not set
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_LZ4 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_KERNEL_XZ=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_KERNFS=y
-# CONFIG_KEXEC is not set
-# CONFIG_KEXEC_FILE is not set
-# CONFIG_KEXEC_SIG is not set
-# CONFIG_KEYBOARD_ADC is not set
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-# CONFIG_KEYBOARD_APPLESPI is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_BCM is not set
-# CONFIG_KEYBOARD_CAP11XX is not set
-# CONFIG_KEYBOARD_DLINK_DIR685 is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_LM8333 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_QT1050 is not set
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_SAMSUNG is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
-# CONFIG_KEYBOARD_STMPE is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_TEGRA is not set
-# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
-# CONFIG_KEYBOARD_TWL4030 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYS is not set
-# CONFIG_KEYS_REQUEST_CACHE is not set
-# CONFIG_KEY_DH_OPERATIONS is not set
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-# CONFIG_KMX61 is not set
-# CONFIG_KPC2000 is not set
-# CONFIG_KPROBES is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
-# CONFIG_KPROBE_EVENT_GEN_TEST is not set
-# CONFIG_KS7010 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_KSM is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_KUNIT is not set
-CONFIG_KUSER_HELPERS=y
-# CONFIG_KVM_AMD is not set
-# CONFIG_KVM_AMD_SEV is not set
-# CONFIG_KVM_GUEST is not set
-# CONFIG_KVM_INTEL is not set
-# CONFIG_KVM_WERROR is not set
-# CONFIG_KXCJK1013 is not set
-# CONFIG_KXSD9 is not set
-# CONFIG_L2TP is not set
-# CONFIG_L2TP_ETH is not set
-# CONFIG_L2TP_IP is not set
-# CONFIG_L2TP_V3 is not set
-# CONFIG_LAN743X is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_LANTIQ is not set
-# CONFIG_LAPB is not set
-# CONFIG_LASAT is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_LATTICE_ECP3_CONFIG is not set
-CONFIG_LBDAF=y
-# CONFIG_LCD_AMS369FG06 is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_LCD_HX8357 is not set
-# CONFIG_LCD_ILI922X is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LD9040 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LMS501KF03 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_OTM3225A is not set
-# CONFIG_LCD_S6E63M0 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LDISC_AUTOLOAD=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y
-# CONFIG_LD_HEAD_STUB_CATCH is not set
-# CONFIG_LEDS_AN30259A is not set
-# CONFIG_LEDS_APU is not set
-# CONFIG_LEDS_AW2013 is not set
-# CONFIG_LEDS_BCM6328 is not set
-# CONFIG_LEDS_BCM6358 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_BLINKM is not set
-CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
-CONFIG_LEDS_CLASS=y
-# CONFIG_LEDS_CLASS_FLASH is not set
-CONFIG_LEDS_CLASS_MULTICOLOR=y
-# CONFIG_LEDS_CR0014114 is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_EL15203000 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_INTEL_SS4200 is not set
-# CONFIG_LEDS_IS31FL319X is not set
-# CONFIG_LEDS_IS31FL32XX is not set
-# CONFIG_LEDS_LM3530 is not set
-# CONFIG_LEDS_LM3532 is not set
-# CONFIG_LEDS_LM355x is not set
-# CONFIG_LEDS_LM3642 is not set
-# CONFIG_LEDS_LM3692X is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_LP3952 is not set
-# CONFIG_LEDS_LP50XX is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_LP5523 is not set
-# CONFIG_LEDS_LP5562 is not set
-# CONFIG_LEDS_LP55XX_COMMON is not set
-# CONFIG_LEDS_LP8501 is not set
-# CONFIG_LEDS_LP8860 is not set
-# CONFIG_LEDS_LT3593 is not set
-# CONFIG_LEDS_MLXCPLD is not set
-# CONFIG_LEDS_MLXREG is not set
-# CONFIG_LEDS_NIC78BX is not set
-# CONFIG_LEDS_NS2 is not set
-# CONFIG_LEDS_OT200 is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_PCA963X is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_SPI_BYTE is not set
-# CONFIG_LEDS_SYSCON is not set
-# CONFIG_LEDS_TCA6507 is not set
-# CONFIG_LEDS_TI_LMU_COMMON is not set
-# CONFIG_LEDS_TLC591XX is not set
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
-# CONFIG_LEDS_TRIGGER_AUDIO is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_CAMERA is not set
-# CONFIG_LEDS_TRIGGER_CPU is not set
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_LEDS_TRIGGER_DISK is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_MTD is not set
-CONFIG_LEDS_TRIGGER_NETDEV=y
-# CONFIG_LEDS_TRIGGER_ONESHOT is not set
-# CONFIG_LEDS_TRIGGER_PANIC is not set
-# CONFIG_LEDS_TRIGGER_PATTERN is not set
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
-# CONFIG_LEDS_TURRIS_OMNIA is not set
-# CONFIG_LEDS_USER is not set
-# CONFIG_LED_TRIGGER_PHY is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_LGUEST is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_LIB80211_CRYPT_CCMP is not set
-# CONFIG_LIB80211_CRYPT_TKIP is not set
-# CONFIG_LIB80211_CRYPT_WEP is not set
-# CONFIG_LIB80211_DEBUG is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_LIBIPW_DEBUG is not set
-# CONFIG_LIBNVDIMM is not set
-CONFIG_LIB_MEMNEQ=y
-# CONFIG_LIDAR_LITE_V2 is not set
-CONFIG_LINEAR_RANGES=y
-# CONFIG_LIQUIDIO is not set
-# CONFIG_LIQUIDIO_VF is not set
-# CONFIG_LIRC is not set
-# CONFIG_LIS3L02DQ is not set
-# CONFIG_LKDTM is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_LMP91000 is not set
-# CONFIG_LNET is not set
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_LOCKD is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_LOCKD_V4=y
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_LOCK_EVENT_COUNTS is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_LOCK_TORTURE_TEST is not set
-# CONFIG_LOGFS is not set
-# CONFIG_LOGIG940_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIWHEELS_FF is not set
-# CONFIG_LOGO is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
-# CONFIG_LOONGSON_MC146818 is not set
-# CONFIG_LPC_ICH is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
-CONFIG_LSM_MMAP_MIN_ADDR=65536
-# CONFIG_LTC1660 is not set
-# CONFIG_LTC2471 is not set
-# CONFIG_LTC2485 is not set
-# CONFIG_LTC2496 is not set
-# CONFIG_LTC2497 is not set
-# CONFIG_LTC2632 is not set
-# CONFIG_LTC2983 is not set
-# CONFIG_LTE_GDM724X is not set
-# CONFIG_LTPC is not set
-# CONFIG_LTR501 is not set
-# CONFIG_LUSTRE_FS is not set
-# CONFIG_LV0104CS is not set
-# CONFIG_LWTUNNEL is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_LZ4HC_COMPRESS is not set
-# CONFIG_LZ4_COMPRESS is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-CONFIG_LZMA_COMPRESS=y
-CONFIG_LZMA_DECOMPRESS=y
-# CONFIG_LZO_COMPRESS is not set
-# CONFIG_LZO_DECOMPRESS is not set
-# CONFIG_M62332 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_MAC80211_MESSAGE_TRACING is not set
-CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
-# CONFIG_MACB is not set
-# CONFIG_MACB_USE_HWSTAMP is not set
-# CONFIG_MACH_ASM9260 is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_INGENIC_SOC is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON2EF is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
-# CONFIG_MACH_PIC32 is not set
-# CONFIG_MACH_PISTACHIO is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MACH_XILFPGA is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-# CONFIG_MACSEC is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_MACVTAP is not set
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MAG3110 is not set
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
-# CONFIG_MAGIC_SYSRQ_SERIAL is not set
-CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
-# CONFIG_MAILBOX is not set
-# CONFIG_MANAGER_SBS is not set
-# CONFIG_MANDATORY_FILE_LOCKING is not set
-# CONFIG_MANGLE_BOOTARGS is not set
-# CONFIG_MARVELL_10G_PHY is not set
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MAX1027 is not set
-# CONFIG_MAX11100 is not set
-# CONFIG_MAX1118 is not set
-# CONFIG_MAX1241 is not set
-# CONFIG_MAX1363 is not set
-# CONFIG_MAX30100 is not set
-# CONFIG_MAX30102 is not set
-# CONFIG_MAX31856 is not set
-# CONFIG_MAX44000 is not set
-# CONFIG_MAX44009 is not set
-# CONFIG_MAX517 is not set
-# CONFIG_MAX5432 is not set
-# CONFIG_MAX5481 is not set
-# CONFIG_MAX5487 is not set
-# CONFIG_MAX5821 is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_MAX9611 is not set
-# CONFIG_MAXIM_THERMOCOUPLE is not set
-CONFIG_MAY_USE_DEVLINK=y
-# CONFIG_MB1232 is not set
-# CONFIG_MC3230 is not set
-# CONFIG_MCB is not set
-# CONFIG_MCP320X is not set
-# CONFIG_MCP3422 is not set
-# CONFIG_MCP3911 is not set
-# CONFIG_MCP4018 is not set
-# CONFIG_MCP41010 is not set
-# CONFIG_MCP4131 is not set
-# CONFIG_MCP4531 is not set
-# CONFIG_MCP4725 is not set
-# CONFIG_MCP4922 is not set
-# CONFIG_MCPM is not set
-# CONFIG_MD is not set
-# CONFIG_MDIO_BCM_UNIMAC is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
-# CONFIG_MDIO_DEVICE is not set
-# CONFIG_MDIO_DEVRES is not set
-# CONFIG_MDIO_HISI_FEMAC is not set
-# CONFIG_MDIO_IPQ4019 is not set
-# CONFIG_MDIO_IPQ8064 is not set
-# CONFIG_MDIO_MSCC_MIIM is not set
-# CONFIG_MDIO_MVUSB is not set
-# CONFIG_MDIO_OCTEON is not set
-# CONFIG_MDIO_THUNDER is not set
-# CONFIG_MDIO_XPCS is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_MEDIATEK_GE_PHY is not set
-# CONFIG_MEDIATEK_MT6577_AUXADC is not set
-# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
-# CONFIG_MEDIA_ATTACH is not set
-# CONFIG_MEDIA_CAMERA_SUPPORT is not set
-# CONFIG_MEDIA_CEC_SUPPORT is not set
-# CONFIG_MEDIA_CONTROLLER is not set
-# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
-# CONFIG_MEDIA_PCI_SUPPORT is not set
-# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
-# CONFIG_MEDIA_RADIO_SUPPORT is not set
-# CONFIG_MEDIA_RC_SUPPORT is not set
-# CONFIG_MEDIA_SDR_SUPPORT is not set
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-# CONFIG_MEDIA_SUPPORT is not set
-# CONFIG_MEDIA_SUPPORT_FILTER is not set
-# CONFIG_MEDIA_TEST_SUPPORT is not set
-# CONFIG_MEDIA_TUNER_E4000 is not set
-# CONFIG_MEDIA_TUNER_FC0011 is not set
-# CONFIG_MEDIA_TUNER_FC0012 is not set
-# CONFIG_MEDIA_TUNER_FC0013 is not set
-# CONFIG_MEDIA_TUNER_FC2580 is not set
-# CONFIG_MEDIA_TUNER_IT913X is not set
-# CONFIG_MEDIA_TUNER_M88RS6000T is not set
-# CONFIG_MEDIA_TUNER_MAX2165 is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_MEDIA_TUNER_MSI001 is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2063 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MXL301RF is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_QM1D1B0004 is not set
-# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_R820T is not set
-# CONFIG_MEDIA_TUNER_SI2157 is not set
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA18212 is not set
-# CONFIG_MEDIA_TUNER_TDA18218 is not set
-# CONFIG_MEDIA_TUNER_TDA18250 is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_TUA9001 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC4000 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_USB_SUPPORT is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_MELLANOX_PLATFORM is not set
-CONFIG_MEMBARRIER=y
-# CONFIG_MEMORY is not set
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_MEMORY_HOTPLUG is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_MEN_A21_WDT is not set
-# CONFIG_MESON_SM is not set
-CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
-# CONFIG_MFD_88PM800 is not set
-# CONFIG_MFD_88PM805 is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_AC100 is not set
-# CONFIG_MFD_ACT8945A is not set
-# CONFIG_MFD_ARIZONA_I2C is not set
-# CONFIG_MFD_ARIZONA_SPI is not set
-# CONFIG_MFD_AS3711 is not set
-# CONFIG_MFD_AS3722 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_ATMEL_FLEXCOM is not set
-# CONFIG_MFD_ATMEL_HLCDC is not set
-# CONFIG_MFD_AXP20X is not set
-# CONFIG_MFD_AXP20X_I2C is not set
-# CONFIG_MFD_BCM590XX is not set
-# CONFIG_MFD_BD9571MWV is not set
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_CPCAP is not set
-# CONFIG_MFD_CROS_EC is not set
-# CONFIG_MFD_CS5535 is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_DA9055 is not set
-# CONFIG_MFD_DA9062 is not set
-# CONFIG_MFD_DA9063 is not set
-# CONFIG_MFD_DA9150 is not set
-# CONFIG_MFD_DLN2 is not set
-# CONFIG_MFD_EXYNOS_LPASS is not set
-# CONFIG_MFD_GATEWORKS_GSC is not set
-# CONFIG_MFD_HI6421_PMIC is not set
-# CONFIG_MFD_INTEL_M10_BMC is not set
-# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
-# CONFIG_MFD_IQS62X is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_MFD_KEMPLD is not set
-# CONFIG_MFD_LM3533 is not set
-# CONFIG_MFD_LOCHNAGAR is not set
-# CONFIG_MFD_LP3943 is not set
-# CONFIG_MFD_LP8788 is not set
-# CONFIG_MFD_MADERA is not set
-# CONFIG_MFD_MAX14577 is not set
-# CONFIG_MFD_MAX77620 is not set
-# CONFIG_MFD_MAX77650 is not set
-# CONFIG_MFD_MAX77686 is not set
-# CONFIG_MFD_MAX77693 is not set
-# CONFIG_MFD_MAX77843 is not set
-# CONFIG_MFD_MAX8907 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_MAX8998 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_MFD_MC13XXX_I2C is not set
-# CONFIG_MFD_MC13XXX_SPI is not set
-# CONFIG_MFD_MENF21BMC is not set
-# CONFIG_MFD_MP2629 is not set
-# CONFIG_MFD_MT6360 is not set
-# CONFIG_MFD_MT6397 is not set
-# CONFIG_MFD_OMAP_USB_HOST is not set
-# CONFIG_MFD_PALMAS is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_PM8921_CORE is not set
-# CONFIG_MFD_PM8XXX is not set
-# CONFIG_MFD_RC5T583 is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_RETU is not set
-# CONFIG_MFD_RK808 is not set
-# CONFIG_MFD_RN5T618 is not set
-# CONFIG_MFD_ROHM_BD70528 is not set
-# CONFIG_MFD_ROHM_BD71828 is not set
-# CONFIG_MFD_ROHM_BD718XX is not set
-# CONFIG_MFD_RT5033 is not set
-# CONFIG_MFD_RTSX_PCI is not set
-# CONFIG_MFD_RTSX_USB is not set
-# CONFIG_MFD_SEC_CORE is not set
-# CONFIG_MFD_SI476X_CORE is not set
-# CONFIG_MFD_SKY81452 is not set
-# CONFIG_MFD_SL28CPLD is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SMSC is not set
-# CONFIG_MFD_STMFX is not set
-# CONFIG_MFD_STMPE is not set
-# CONFIG_MFD_STPMIC1 is not set
-# CONFIG_MFD_SYSCON is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC3589X is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_MFD_TI_AM335X_TSCADC is not set
-# CONFIG_MFD_TI_LMU is not set
-# CONFIG_MFD_TI_LP873X is not set
-# CONFIG_MFD_TI_LP87565 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TPS65086 is not set
-# CONFIG_MFD_TPS65090 is not set
-# CONFIG_MFD_TPS65217 is not set
-# CONFIG_MFD_TPS65218 is not set
-# CONFIG_MFD_TPS6586X is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_TPS65912_SPI is not set
-# CONFIG_MFD_TPS68470 is not set
-# CONFIG_MFD_TPS80031 is not set
-# CONFIG_MFD_TQMX86 is not set
-# CONFIG_MFD_VIPERBOARD is not set
-# CONFIG_MFD_VX855 is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM831X_I2C is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_MHI_BUS is not set
-# CONFIG_MICREL_KS8995MA is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_MICROCHIP_KSZ is not set
-# CONFIG_MICROCHIP_PHY is not set
-# CONFIG_MICROCHIP_PIT64B is not set
-# CONFIG_MICROCHIP_T1_PHY is not set
-# CONFIG_MICROSEMI_PHY is not set
-# CONFIG_MIGRATION is not set
-CONFIG_MII=y
-# CONFIG_MIKROTIK is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_CDMM is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_FPU_EMULATOR is not set
-# CONFIG_MIPS_FP_SUPPORT is not set
-# CONFIG_MIPS_GENERIC is not set
-# CONFIG_MIPS_GENERIC_KERNEL is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_O32_FP64_SUPPORT is not set
-# CONFIG_MIPS_PARAVIRT is not set
-# CONFIG_MIPS_PLATFORM_DEVICES is not set
-# CONFIG_MIPS_SEAD3 is not set
-# CONFIG_MISC_ALCOR_PCI is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_MISC_RTSX_PCI is not set
-# CONFIG_MISC_RTSX_USB is not set
-# CONFIG_MISDN is not set
-# CONFIG_MISDN_AVMFRITZ is not set
-# CONFIG_MISDN_HFCPCI is not set
-# CONFIG_MISDN_HFCUSB is not set
-# CONFIG_MISDN_INFINEON is not set
-# CONFIG_MISDN_NETJET is not set
-# CONFIG_MISDN_SPEEDFAX is not set
-# CONFIG_MISDN_W6692 is not set
-CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y
-# CONFIG_MKISS is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX5_CORE is not set
-# CONFIG_MLX90614 is not set
-# CONFIG_MLX90632 is not set
-# CONFIG_MLXFW is not set
-# CONFIG_MLXSW_CORE is not set
-# CONFIG_MLX_CPLD_PLATFORM is not set
-# CONFIG_MLX_PLATFORM is not set
-# CONFIG_MMA7455_I2C is not set
-# CONFIG_MMA7455_SPI is not set
-# CONFIG_MMA7660 is not set
-# CONFIG_MMA8452 is not set
-# CONFIG_MMA9551 is not set
-# CONFIG_MMA9553 is not set
-# CONFIG_MMC is not set
-# CONFIG_MMC35240 is not set
-# CONFIG_MMC_ARMMMCI is not set
-# CONFIG_MMC_AU1X is not set
-# CONFIG_MMC_BLOCK is not set
-CONFIG_MMC_BLOCK_MINORS=8
-# CONFIG_MMC_CAVIUM_THUNDERX is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_CQHCI is not set
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_DW is not set
-# CONFIG_MMC_HSQ is not set
-# CONFIG_MMC_JZ4740 is not set
-# CONFIG_MMC_MTK is not set
-# CONFIG_MMC_MVSDIO is not set
-# CONFIG_MMC_S3C is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SDHCI_ACPI is not set
-# CONFIG_MMC_SDHCI_AM654 is not set
-# CONFIG_MMC_SDHCI_BCM_KONA is not set
-# CONFIG_MMC_SDHCI_BRCMSTB is not set
-# CONFIG_MMC_SDHCI_CADENCE is not set
-# CONFIG_MMC_SDHCI_F_SDH30 is not set
-# CONFIG_MMC_SDHCI_IPROC is not set
-# CONFIG_MMC_SDHCI_MILBEAUT is not set
-# CONFIG_MMC_SDHCI_MSM is not set
-# CONFIG_MMC_SDHCI_OF_ARASAN is not set
-# CONFIG_MMC_SDHCI_OF_ASPEED is not set
-# CONFIG_MMC_SDHCI_OF_AT91 is not set
-# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set
-# CONFIG_MMC_SDHCI_OF_ESDHC is not set
-# CONFIG_MMC_SDHCI_OF_HLWD is not set
-# CONFIG_MMC_SDHCI_OMAP is not set
-# CONFIG_MMC_SDHCI_PXAV2 is not set
-# CONFIG_MMC_SDHCI_PXAV3 is not set
-# CONFIG_MMC_SDHCI_S3C is not set
-# CONFIG_MMC_SDHCI_XENON is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_STM32_SDMMC is not set
-# CONFIG_MMC_TEST is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_TOSHIBA_PCI is not set
-# CONFIG_MMC_USDHI6ROL0 is not set
-# CONFIG_MMC_USHC is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MMC_VUB300 is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_MMU=y
-CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
-CONFIG_MMU_GATHER_TABLE_FREE=y
-CONFIG_MODULES=y
-# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
-# CONFIG_MODULE_COMPRESS is not set
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODULE_SIG is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_MODULE_STRIPPED=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MOST is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_ELAN_I2C is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_PS2_FOCALTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MOUSE_SYNAPTICS_USB is not set
-# CONFIG_MOXTET is not set
-# CONFIG_MPL115 is not set
-# CONFIG_MPL115_I2C is not set
-# CONFIG_MPL115_SPI is not set
-# CONFIG_MPL3115 is not set
-# CONFIG_MPLS is not set
-# CONFIG_MPLS_IPTUNNEL is not set
-# CONFIG_MPLS_ROUTING is not set
-# CONFIG_MPTCP is not set
-# CONFIG_MPU3050_I2C is not set
-# CONFIG_MQ_IOSCHED_DEADLINE is not set
-# CONFIG_MQ_IOSCHED_KYBER is not set
-# CONFIG_MS5611 is not set
-# CONFIG_MS5637 is not set
-# CONFIG_MSCC_OCELOT_SWITCH is not set
-# CONFIG_MSDOS_FS is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_MSI_LAPTOP is not set
-# CONFIG_MST_IRQ is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_DOCG3 is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_HYPERBUS is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_LATCH_ADDR is not set
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_LPDDR2_NVM is not set
-# CONFIG_MTD_M25P80 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MCHP23K256 is not set
-# CONFIG_MTD_MT81xx_NOR is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_AMS_DELTA is not set
-# CONFIG_MTD_NAND_AR934X is not set
-# CONFIG_MTD_NAND_AR934X_HW_ECC is not set
-# CONFIG_MTD_NAND_ARASAN is not set
-# CONFIG_MTD_NAND_ATMEL is not set
-# CONFIG_MTD_NAND_AU1550 is not set
-# CONFIG_MTD_NAND_BCH is not set
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_BRCMNAND is not set
-# CONFIG_MTD_NAND_CADENCE is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_CM_X270 is not set
-# CONFIG_MTD_NAND_CS553X is not set
-# CONFIG_MTD_NAND_DAVINCI is not set
-# CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_DENALI_DT is not set
-# CONFIG_MTD_NAND_DENALI_PCI is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_DOCG4 is not set
-# CONFIG_MTD_NAND_ECC is not set
-# CONFIG_MTD_NAND_ECC_BCH is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_ECC_SW_BCH is not set
-# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_IFC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
-# CONFIG_MTD_NAND_FSMC is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_GPMI_NAND is not set
-# CONFIG_MTD_NAND_HISI504 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_JZ4740 is not set
-# CONFIG_MTD_NAND_MPC5121_NFC is not set
-# CONFIG_MTD_NAND_MTK is not set
-# CONFIG_MTD_NAND_MTK_BMT is not set
-# CONFIG_MTD_NAND_MXC is not set
-# CONFIG_MTD_NAND_MXIC is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_NDFC is not set
-# CONFIG_MTD_NAND_NUC900 is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
-# CONFIG_MTD_NAND_ORION is not set
-# CONFIG_MTD_NAND_PASEMI is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_PXA3xx is not set
-# CONFIG_MTD_NAND_RB4XX is not set
-# CONFIG_MTD_NAND_RB750 is not set
-# CONFIG_MTD_NAND_RB91X is not set
-# CONFIG_MTD_NAND_RICOH is not set
-# CONFIG_MTD_NAND_S3C2410 is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_SH_FLCTL is not set
-# CONFIG_MTD_NAND_SOCRATES is not set
-# CONFIG_MTD_NAND_TMIO is not set
-# CONFIG_MTD_NAND_TXX9NDFMC is not set
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_ONENAND is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_PARSER_TRX is not set
-# CONFIG_MTD_PARTITIONED_MASTER is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PHYSMAP_GEMINI is not set
-# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set
-# CONFIG_MTD_PHYSMAP_IXP4XX is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
-# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
-# CONFIG_MTD_PHYSMAP_VERSATILE is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_RAW_NAND is not set
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_ROM is not set
-CONFIG_MTD_ROOTFS_ROOT_DEV=y
-# CONFIG_MTD_ROUTERBOOT_PARTS is not set
-# CONFIG_MTD_SERCOMM_PARTS is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_SPINAND_MT29F is not set
-# CONFIG_MTD_SPI_NAND is not set
-# CONFIG_MTD_SPI_NOR is not set
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-# CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE is not set
-CONFIG_MTD_SPLIT=y
-# CONFIG_MTD_SPLIT_BCM63XX_FW is not set
-# CONFIG_MTD_SPLIT_BCM_WFI_FW is not set
-# CONFIG_MTD_SPLIT_BRNIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_ELF_FW is not set
-# CONFIG_MTD_SPLIT_EVA_FW is not set
-# CONFIG_MTD_SPLIT_FIRMWARE is not set
-CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
-# CONFIG_MTD_SPLIT_FIT_FW is not set
-# CONFIG_MTD_SPLIT_H3C_VFS is not set
-# CONFIG_MTD_SPLIT_JIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_LZMA_FW is not set
-# CONFIG_MTD_SPLIT_MINOR_FW is not set
-# CONFIG_MTD_SPLIT_SEAMA_FW is not set
-CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
-CONFIG_MTD_SPLIT_SUPPORT=y
-# CONFIG_MTD_SPLIT_TPLINK_FW is not set
-# CONFIG_MTD_SPLIT_TRX_FW is not set
-# CONFIG_MTD_SPLIT_UIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_WRGG_FW is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SWAP is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_UBI is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-# CONFIG_MTD_UIMAGE_SPLIT is not set
-# CONFIG_MTD_VIRT_CONCAT is not set
-# CONFIG_MTK_MMC is not set
-# CONFIG_MTK_MMSYS is not set
-# CONFIG_MTK_THERMAL is not set
-# CONFIG_MULTIPLEXER is not set
-CONFIG_MULTIUSER=y
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_MUX_ADG792A is not set
-# CONFIG_MUX_ADGS1408 is not set
-# CONFIG_MUX_GPIO is not set
-# CONFIG_MUX_MMIO is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_MVMDIO is not set
-# CONFIG_MVNETA_BM is not set
-# CONFIG_MVSW61XX_PHY is not set
-# CONFIG_MV_XOR_V2 is not set
-# CONFIG_MWAVE is not set
-# CONFIG_MWL8K is not set
-# CONFIG_MXC4005 is not set
-# CONFIG_MXC6255 is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NAU7802 is not set
-# CONFIG_NBPFAXI_DMA is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NE2000 is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NEC_MARKEINS is not set
-CONFIG_NET=y
-# CONFIG_NETCONSOLE is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVSIM is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_NETFILTER_ADVANCED is not set
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_INGRESS is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_NETLINK_ACCT is not set
-# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NETFILTER_NETLINK_OSF is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_NETFILTER_XT_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_BPF is not set
-# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_CPU is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ECN is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
-# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_LOG is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
-# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETLINK_DIAG is not set
-# CONFIG_NETLINK_MMAP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETROM is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NET_9P is not set
-# CONFIG_NET_ACT_BPF is not set
-# CONFIG_NET_ACT_CSUM is not set
-# CONFIG_NET_ACT_CT is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_GATE is not set
-# CONFIG_NET_ACT_IFE is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_MPLS is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_POLICE is not set
-# CONFIG_NET_ACT_SAMPLE is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-# CONFIG_NET_ACT_SKBMOD is not set
-# CONFIG_NET_ACT_TUNNEL_KEY is not set
-# CONFIG_NET_ACT_VLAN is not set
-CONFIG_NET_CADENCE=y
-# CONFIG_NET_CALXEDA_XGMAC is not set
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_BPF is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_FLOWER is not set
-# CONFIG_NET_CLS_FW is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_NET_CLS_MATCHALL is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_U32 is not set
-CONFIG_NET_CORE=y
-# CONFIG_NET_DEVLINK is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_NET_DSA_AR9331 is not set
-# CONFIG_NET_DSA_BCM_SF2 is not set
-# CONFIG_NET_DSA_LANTIQ_GSWIP is not set
-# CONFIG_NET_DSA_LEGACY is not set
-# CONFIG_NET_DSA_LOOP is not set
-# CONFIG_NET_DSA_MICROCHIP_KSZ8795 is not set
-# CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set
-# CONFIG_NET_DSA_MSCC_FELIX is not set
-# CONFIG_NET_DSA_MSCC_SEVILLE is not set
-# CONFIG_NET_DSA_MT7530 is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6171 is not set
-# CONFIG_NET_DSA_MV88E6352 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6XXX_PTP is not set
-# CONFIG_NET_DSA_QCA8K is not set
-# CONFIG_NET_DSA_REALTEK_SMI is not set
-# CONFIG_NET_DSA_SJA1105 is not set
-# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set
-# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set
-# CONFIG_NET_DSA_TAG_8021Q is not set
-# CONFIG_NET_DSA_TAG_AR9331 is not set
-# CONFIG_NET_DSA_TAG_BRCM is not set
-# CONFIG_NET_DSA_TAG_BRCM_LEGACY is not set
-# CONFIG_NET_DSA_TAG_BRCM_PREPEND is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-# CONFIG_NET_DSA_TAG_GSWIP is not set
-# CONFIG_NET_DSA_TAG_KSZ is not set
-# CONFIG_NET_DSA_TAG_LAN9303 is not set
-# CONFIG_NET_DSA_TAG_MTK is not set
-# CONFIG_NET_DSA_TAG_OCELOT is not set
-# CONFIG_NET_DSA_TAG_QCA is not set
-# CONFIG_NET_DSA_TAG_RTL4_A is not set
-# CONFIG_NET_DSA_TAG_SJA1105 is not set
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-# CONFIG_NET_DSA_VITESSE_VSC73XX is not set
-# CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM is not set
-# CONFIG_NET_DSA_VITESSE_VSC73XX_SPI is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_EMATCH_CANID is not set
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH_IPT is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_TEXT is not set
-# CONFIG_NET_EMATCH_U32 is not set
-# CONFIG_NET_FAILOVER is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NET_FOU is not set
-# CONFIG_NET_FOU_IP_TUNNELS is not set
-# CONFIG_NET_IFE is not set
-# CONFIG_NET_IPGRE is not set
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_NET_IPGRE_DEMUX is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPVTI is not set
-# CONFIG_NET_IP_TUNNEL is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_NET_KEY_MIGRATE is not set
-# CONFIG_NET_L3_MASTER_DEV is not set
-# CONFIG_NET_MEDIATEK_STAR_EMAC is not set
-# CONFIG_NET_MPLS_GSO is not set
-# CONFIG_NET_NCSI is not set
-# CONFIG_NET_NSH is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_NET_PTP_CLASSIFY is not set
-CONFIG_NET_RX_BUSY_POLL=y
-# CONFIG_NET_SB1000 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_ATM is not set
-# CONFIG_NET_SCH_CAKE is not set
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_CBS is not set
-# CONFIG_NET_SCH_CHOKE is not set
-# CONFIG_NET_SCH_CODEL is not set
-CONFIG_NET_SCH_DEFAULT=y
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_ETF is not set
-# CONFIG_NET_SCH_ETS is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_FQ is not set
-CONFIG_NET_SCH_FQ_CODEL=y
-# CONFIG_NET_SCH_FQ_PIE is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_HHF is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_INGRESS is not set
-# CONFIG_NET_SCH_MQPRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_PIE is not set
-# CONFIG_NET_SCH_PLUG is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_QFQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFB is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_SKBPRIO is not set
-# CONFIG_NET_SCH_TAPRIO is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCTPPROBE is not set
-# CONFIG_NET_SWITCHDEV is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_TC_SKB_EXT is not set
-# CONFIG_NET_TEAM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_NET_UDP_TUNNEL is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_NET_VENDOR_8390=y
-CONFIG_NET_VENDOR_ADAPTEC=y
-CONFIG_NET_VENDOR_AGERE=y
-CONFIG_NET_VENDOR_ALACRITECH=y
-CONFIG_NET_VENDOR_ALTEON=y
-CONFIG_NET_VENDOR_AMAZON=y
-CONFIG_NET_VENDOR_AMD=y
-CONFIG_NET_VENDOR_AQUANTIA=y
-CONFIG_NET_VENDOR_ARC=y
-CONFIG_NET_VENDOR_ATHEROS=y
-CONFIG_NET_VENDOR_AURORA=y
-CONFIG_NET_VENDOR_BROADCOM=y
-CONFIG_NET_VENDOR_BROCADE=y
-CONFIG_NET_VENDOR_CADENCE=y
-CONFIG_NET_VENDOR_CAVIUM=y
-CONFIG_NET_VENDOR_CHELSIO=y
-CONFIG_NET_VENDOR_CIRRUS=y
-CONFIG_NET_VENDOR_CISCO=y
-CONFIG_NET_VENDOR_CORTINA=y
-CONFIG_NET_VENDOR_DEC=y
-CONFIG_NET_VENDOR_DLINK=y
-CONFIG_NET_VENDOR_EMULEX=y
-CONFIG_NET_VENDOR_EXAR=y
-CONFIG_NET_VENDOR_EZCHIP=y
-CONFIG_NET_VENDOR_FARADAY=y
-CONFIG_NET_VENDOR_FREESCALE=y
-CONFIG_NET_VENDOR_FUJITSU=y
-CONFIG_NET_VENDOR_GOOGLE=y
-CONFIG_NET_VENDOR_HISILICON=y
-CONFIG_NET_VENDOR_HP=y
-CONFIG_NET_VENDOR_HUAWEI=y
-CONFIG_NET_VENDOR_I825XX=y
-CONFIG_NET_VENDOR_IBM=y
-CONFIG_NET_VENDOR_INTEL=y
-CONFIG_NET_VENDOR_MARVELL=y
-CONFIG_NET_VENDOR_MELLANOX=y
-CONFIG_NET_VENDOR_MICREL=y
-CONFIG_NET_VENDOR_MICROCHIP=y
-CONFIG_NET_VENDOR_MICROSEMI=y
-CONFIG_NET_VENDOR_MYRI=y
-CONFIG_NET_VENDOR_NATSEMI=y
-CONFIG_NET_VENDOR_NETERION=y
-CONFIG_NET_VENDOR_NETRONOME=y
-CONFIG_NET_VENDOR_NI=y
-CONFIG_NET_VENDOR_NVIDIA=y
-CONFIG_NET_VENDOR_OKI=y
-CONFIG_NET_VENDOR_PACKET_ENGINES=y
-CONFIG_NET_VENDOR_PENSANDO=y
-CONFIG_NET_VENDOR_QLOGIC=y
-CONFIG_NET_VENDOR_QUALCOMM=y
-CONFIG_NET_VENDOR_RDC=y
-CONFIG_NET_VENDOR_REALTEK=y
-CONFIG_NET_VENDOR_RENESAS=y
-CONFIG_NET_VENDOR_ROCKER=y
-CONFIG_NET_VENDOR_SAMSUNG=y
-CONFIG_NET_VENDOR_SEEQ=y
-CONFIG_NET_VENDOR_SILAN=y
-CONFIG_NET_VENDOR_SIS=y
-CONFIG_NET_VENDOR_SMSC=y
-CONFIG_NET_VENDOR_SOCIONEXT=y
-CONFIG_NET_VENDOR_SOLARFLARE=y
-CONFIG_NET_VENDOR_STMICRO=y
-CONFIG_NET_VENDOR_SUN=y
-CONFIG_NET_VENDOR_SYNOPSYS=y
-CONFIG_NET_VENDOR_TEHUTI=y
-CONFIG_NET_VENDOR_TI=y
-CONFIG_NET_VENDOR_TOSHIBA=y
-CONFIG_NET_VENDOR_VIA=y
-CONFIG_NET_VENDOR_WIZNET=y
-CONFIG_NET_VENDOR_XILINX=y
-CONFIG_NET_VENDOR_XIRCOM=y
-# CONFIG_NET_VRF is not set
-# CONFIG_NET_XGENE is not set
-CONFIG_NEW_LEDS=y
-# CONFIG_NFC is not set
-# CONFIG_NFP is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V2_ACL is not set
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFS_ACL_SUPPORT is not set
-CONFIG_NFS_COMMON=y
-# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_FSCACHE is not set
-# CONFIG_NFS_SWAP is not set
-# CONFIG_NFS_V2 is not set
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFTL is not set
-# CONFIG_NFT_BRIDGE_META is not set
-# CONFIG_NFT_BRIDGE_REJECT is not set
-# CONFIG_NFT_CONNLIMIT is not set
-# CONFIG_NFT_DUP_IPV4 is not set
-# CONFIG_NFT_DUP_IPV6 is not set
-# CONFIG_NFT_FIB_IPV4 is not set
-# CONFIG_NFT_FIB_IPV6 is not set
-# CONFIG_NFT_FIB_NETDEV is not set
-# CONFIG_NFT_FLOW_OFFLOAD is not set
-# CONFIG_NFT_OBJREF is not set
-# CONFIG_NFT_OSF is not set
-# CONFIG_NFT_RT is not set
-# CONFIG_NFT_SET_BITMAP is not set
-# CONFIG_NFT_SOCKET is not set
-# CONFIG_NFT_SYNPROXY is not set
-# CONFIG_NFT_TPROXY is not set
-# CONFIG_NFT_TUNNEL is not set
-# CONFIG_NFT_XFRM is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_BRIDGE is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_LABELS is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-CONFIG_NF_CONNTRACK_PROCFS=y
-# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SECMARK is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_SNMP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CONNTRACK_TIMEOUT is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-# CONFIG_NF_CONNTRACK_ZONES is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_NETLINK_HELPER is not set
-# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_GRE is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_NF_DUP_IPV4 is not set
-# CONFIG_NF_DUP_IPV6 is not set
-# CONFIG_NF_FLOW_TABLE is not set
-# CONFIG_NF_LOG_ARP is not set
-# CONFIG_NF_LOG_BRIDGE is not set
-# CONFIG_NF_LOG_IPV4 is not set
-# CONFIG_NF_LOG_NETDEV is not set
-# CONFIG_NF_NAT is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_FTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_IRC is not set
-# CONFIG_NF_NAT_NEEDED is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_PROTO_GRE is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_REJECT_IPV4 is not set
-# CONFIG_NF_REJECT_IPV6 is not set
-# CONFIG_NF_SOCKET_IPV4 is not set
-# CONFIG_NF_SOCKET_IPV6 is not set
-# CONFIG_NF_TABLES is not set
-CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_TABLES_BRIDGE=y
-CONFIG_NF_TABLES_INET=y
-CONFIG_NF_TABLES_IPV4=y
-CONFIG_NF_TABLES_IPV6=y
-CONFIG_NF_TABLES_NETDEV=y
-# CONFIG_NF_TABLES_SET is not set
-# CONFIG_NF_TPROXY_IPV4 is not set
-# CONFIG_NF_TPROXY_IPV6 is not set
-# CONFIG_NI65 is not set
-# CONFIG_NI903X_WDT is not set
-# CONFIG_NIC7018_WDT is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_NIU is not set
-# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
-CONFIG_NLATTR=y
-# CONFIG_NLMON is not set
-# CONFIG_NLM_XLP_BOARD is not set
-# CONFIG_NLM_XLR_BOARD is not set
-# CONFIG_NLS is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_MAC_CELTIC is not set
-# CONFIG_NLS_MAC_CENTEURO is not set
-# CONFIG_NLS_MAC_CROATIAN is not set
-# CONFIG_NLS_MAC_CYRILLIC is not set
-# CONFIG_NLS_MAC_GAELIC is not set
-# CONFIG_NLS_MAC_GREEK is not set
-# CONFIG_NLS_MAC_ICELAND is not set
-# CONFIG_NLS_MAC_INUIT is not set
-# CONFIG_NLS_MAC_ROMAN is not set
-# CONFIG_NLS_MAC_ROMANIAN is not set
-# CONFIG_NLS_MAC_TURKISH is not set
-# CONFIG_NLS_UTF8 is not set
-CONFIG_NMI_LOG_BUF_SHIFT=13
-# CONFIG_NOA1305 is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_NOTIFIER_ERROR_INJECTION is not set
-# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set
-# CONFIG_NOZOMI is not set
-# CONFIG_NO_BOOTMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_NO_HZ_FULL is not set
-# CONFIG_NO_HZ_IDLE is not set
-# CONFIG_NS83820 is not set
-# CONFIG_NTB is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_NTP_PPS is not set
-# CONFIG_NULL_TTY is not set
-# CONFIG_NUMA is not set
-# CONFIG_NVM is not set
-# CONFIG_NVMEM is not set
-# CONFIG_NVMEM_BCM_OCOTP is not set
-# CONFIG_NVMEM_IMX_OCOTP is not set
-# CONFIG_NVMEM_LAYOUT_ONIE_TLV is not set
-# CONFIG_NVMEM_LAYOUT_SL28_VPD is not set
-# CONFIG_NVMEM_REBOOT_MODE is not set
-# CONFIG_NVMEM_RMEM is not set
-# CONFIG_NVMEM_SYSFS is not set
-# CONFIG_NVMEM_U_BOOT_ENV is not set
-# CONFIG_NVME_FC is not set
-# CONFIG_NVME_TARGET is not set
-# CONFIG_NVME_TCP is not set
-# CONFIG_NVRAM is not set
-# CONFIG_NV_TCO is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_NXP_TJA11XX_PHY is not set
-# CONFIG_N_GSM is not set
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_OBS600 is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_OCTEONTX2_AF is not set
-# CONFIG_OCTEONTX2_PF is not set
-# CONFIG_OF_OVERLAY is not set
-CONFIG_OF_RESERVED_MEM=y
-# CONFIG_OF_UNITTEST is not set
-# CONFIG_OID_REGISTRY is not set
-# CONFIG_OMAP2_DSS_DEBUG is not set
-# CONFIG_OMAP2_DSS_DEBUGFS is not set
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP_OCP2SCP is not set
-# CONFIG_OMAP_USB2 is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_OPENVSWITCH is not set
-# CONFIG_OPROFILE is not set
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-# CONFIG_OPT3001 is not set
-CONFIG_OPTIMIZE_INLINING=y
-# CONFIG_ORANGEFS_FS is not set
-# CONFIG_ORION_WATCHDOG is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_OVERLAY_FS=y
-# CONFIG_OVERLAY_FS_INDEX is not set
-# CONFIG_OVERLAY_FS_METACOPY is not set
-CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
-# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
-CONFIG_OVERLAY_FS_XINO_AUTO=y
-# CONFIG_OWL_LOADER is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_PA12203001 is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_DIAG is not set
-# CONFIG_PACKING is not set
-# CONFIG_PAGE_EXTENSION is not set
-# CONFIG_PAGE_OWNER is not set
-# CONFIG_PAGE_POISONING is not set
-# CONFIG_PAGE_POOL is not set
-# CONFIG_PAGE_REPORTING is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PALMAS_GPADC is not set
-# CONFIG_PANASONIC_LAPTOP is not set
-# CONFIG_PANEL is not set
-CONFIG_PANIC_ON_OOPS=y
-CONFIG_PANIC_ON_OOPS_VALUE=1
-CONFIG_PANIC_TIMEOUT=1
-# CONFIG_PANTHERLORD_FF is not set
-# CONFIG_PARAVIRT is not set
-# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARASAN_CF is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CS5535 is not set
-# CONFIG_PATA_CS5536 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IMX is not set
-# CONFIG_PATA_ISAPNP is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OCTEON_CF is not set
-# CONFIG_PATA_OF_PLATFORM is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PC104 is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_PCCARD is not set
-# CONFIG_PCH_DMA is not set
-# CONFIG_PCH_GBE is not set
-# CONFIG_PCH_PHUB is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI200SYN is not set
-# CONFIG_PCIEAER is not set
-# CONFIG_PCIEAER_INJECT is not set
-# CONFIG_PCIEASPM is not set
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCIE_AL is not set
-# CONFIG_PCIE_ALTERA is not set
-# CONFIG_PCIE_ARMADA_8K is not set
-CONFIG_PCIE_BUS_DEFAULT=y
-# CONFIG_PCIE_BUS_PEER2PEER is not set
-# CONFIG_PCIE_BUS_PERFORMANCE is not set
-# CONFIG_PCIE_BUS_SAFE is not set
-# CONFIG_PCIE_BUS_TUNE_OFF is not set
-# CONFIG_PCIE_BW is not set
-# CONFIG_PCIE_CADENCE_HOST is not set
-# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
-# CONFIG_PCIE_DPC is not set
-# CONFIG_PCIE_DW_PLAT is not set
-# CONFIG_PCIE_DW_PLAT_HOST is not set
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIE_IPROC is not set
-# CONFIG_PCIE_KIRIN is not set
-# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
-# CONFIG_PCIE_PTM is not set
-# CONFIG_PCIE_XILINX is not set
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PCI_ATMEL is not set
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
-# CONFIG_PCI_ENDPOINT is not set
-# CONFIG_PCI_ENDPOINT_TEST is not set
-# CONFIG_PCI_FTPCI100 is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_PCI_HISI is not set
-# CONFIG_PCI_HOST_GENERIC is not set
-# CONFIG_PCI_HOST_THUNDER_ECAM is not set
-# CONFIG_PCI_HOST_THUNDER_PEM is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_J721E_HOST is not set
-# CONFIG_PCI_LAYERSCAPE is not set
-# CONFIG_PCI_MESON is not set
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_PASID is not set
-# CONFIG_PCI_PF_STUB is not set
-# CONFIG_PCI_PRI is not set
-CONFIG_PCI_QUIRKS=y
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_SW_SWITCHTEC is not set
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCI_V3_SEMI is not set
-# CONFIG_PCI_XGENE is not set
-# CONFIG_PCMCIA is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_ATMEL is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCNET32 is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PCS_XPCS is not set
-# CONFIG_PD6729 is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_PERCPU_STATS is not set
-# CONFIG_PERCPU_TEST is not set
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_EVENTS_AMD_POWER is not set
-# CONFIG_PERSISTENT_KEYRINGS is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_PHONET is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-# CONFIG_PHY_CADENCE_DP is not set
-# CONFIG_PHY_CADENCE_DPHY is not set
-# CONFIG_PHY_CADENCE_SALVO is not set
-# CONFIG_PHY_CADENCE_SIERRA is not set
-# CONFIG_PHY_CADENCE_TORRENT is not set
-# CONFIG_PHY_CPCAP_USB is not set
-# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
-# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
-# CONFIG_PHY_FSL_IMX8MQ_USB is not set
-# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
-# CONFIG_PHY_MAPPHONE_MDM6600 is not set
-# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
-# CONFIG_PHY_MTK_HDMI is not set
-# CONFIG_PHY_OCELOT_SERDES is not set
-# CONFIG_PHY_PXA_28NM_HSIC is not set
-# CONFIG_PHY_PXA_28NM_USB2 is not set
-# CONFIG_PHY_QCOM_DWC3 is not set
-# CONFIG_PHY_QCOM_USB_HS is not set
-# CONFIG_PHY_QCOM_USB_HSIC is not set
-# CONFIG_PHY_SAMSUNG_USB2 is not set
-# CONFIG_PHY_TUSB1210 is not set
-# CONFIG_PHY_XGENE is not set
-# CONFIG_PI433 is not set
-# CONFIG_PID_IN_CONTEXTIDR is not set
-# CONFIG_PID_NS is not set
-CONFIG_PINCONF=y
-# CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_AXP209 is not set
-# CONFIG_PINCTRL_CEDARFORK is not set
-# CONFIG_PINCTRL_EXYNOS is not set
-# CONFIG_PINCTRL_EXYNOS5440 is not set
-# CONFIG_PINCTRL_ICELAKE is not set
-# CONFIG_PINCTRL_INGENIC is not set
-# CONFIG_PINCTRL_MCP23S08 is not set
-# CONFIG_PINCTRL_MSM8X74 is not set
-# CONFIG_PINCTRL_MT6779 is not set
-# CONFIG_PINCTRL_MT8167 is not set
-# CONFIG_PINCTRL_MT8192 is not set
-# CONFIG_PINCTRL_MTK_V2 is not set
-# CONFIG_PINCTRL_OCELOT is not set
-CONFIG_PINCTRL_SINGLE=y
-# CONFIG_PINCTRL_STMFX is not set
-# CONFIG_PINCTRL_SX150X is not set
-# CONFIG_PING is not set
-CONFIG_PINMUX=y
-# CONFIG_PKCS7_MESSAGE_PARSER is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-# CONFIG_PL320_MBOX is not set
-# CONFIG_PL330_DMA is not set
-# CONFIG_PLATFORM_MHU is not set
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_PLIP is not set
-# CONFIG_PLX_DMA is not set
-# CONFIG_PLX_HERMES is not set
-# CONFIG_PM is not set
-# CONFIG_PMBUS is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMS7003 is not set
-# CONFIG_PM_AUTOSLEEP is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_DEVFREQ is not set
-# CONFIG_PM_WAKELOCKS is not set
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_POSIX_TIMERS=y
-# CONFIG_POWERCAP is not set
-# CONFIG_POWER_AVS is not set
-# CONFIG_POWER_RESET is not set
-# CONFIG_POWER_RESET_BRCMKONA is not set
-# CONFIG_POWER_RESET_BRCMSTB is not set
-# CONFIG_POWER_RESET_GPIO is not set
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_POWER_RESET_LINKSTATION is not set
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set
-# CONFIG_POWER_RESET_QNAP is not set
-# CONFIG_POWER_RESET_RESTART is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
-# CONFIG_POWER_RESET_VERSATILE is not set
-# CONFIG_POWER_RESET_XGENE is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_POWER_SUPPLY_HWMON is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
-# CONFIG_PPC_QUEUED_SPINLOCKS is not set
-# CONFIG_PPP is not set
-# CONFIG_PPPOATM is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPS is not set
-# CONFIG_PPS_CLIENT_GPIO is not set
-# CONFIG_PPS_CLIENT_KTIMER is not set
-# CONFIG_PPS_CLIENT_LDISC is not set
-# CONFIG_PPS_CLIENT_PARPORT is not set
-# CONFIG_PPS_DEBUG is not set
-# CONFIG_PPTP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
-# CONFIG_PREEMPTIRQ_EVENTS is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PRESTERA is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_PRIME_NUMBERS is not set
-CONFIG_PRINTK=y
-# CONFIG_PRINTK_CALLER is not set
-CONFIG_PRINTK_NMI=y
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
-# CONFIG_PRINTK_TIME is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_PRISM2_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_PROC_CHILDREN is not set
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-# CONFIG_PROC_STRIPPED is not set
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILING is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_PROVE_RAW_LOCK_NESTING is not set
-# CONFIG_PROVE_RCU is not set
-# CONFIG_PROVE_RCU_LIST is not set
-# CONFIG_PROVE_RCU_REPEATEDLY is not set
-# CONFIG_PSAMPLE is not set
-# CONFIG_PSB6970_PHY is not set
-# CONFIG_PSI is not set
-# CONFIG_PSTORE is not set
-# CONFIG_PSTORE_842_COMPRESS is not set
-# CONFIG_PSTORE_COMPRESS is not set
-# CONFIG_PSTORE_COMPRESS_DEFAULT is not set
-# CONFIG_PSTORE_CONSOLE is not set
-# CONFIG_PSTORE_DEFLATE_COMPRESS is not set
-# CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT is not set
-# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
-# CONFIG_PSTORE_LZ4_COMPRESS is not set
-# CONFIG_PSTORE_LZO_COMPRESS is not set
-# CONFIG_PSTORE_PMSG is not set
-# CONFIG_PSTORE_RAM is not set
-# CONFIG_PSTORE_ZSTD_COMPRESS is not set
-# CONFIG_PTDUMP_DEBUGFS is not set
-# CONFIG_PTP_1588_CLOCK is not set
-# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
-# CONFIG_PTP_1588_CLOCK_IDTCM is not set
-# CONFIG_PTP_1588_CLOCK_IXP46X is not set
-# CONFIG_PTP_1588_CLOCK_KVM is not set
-# CONFIG_PTP_1588_CLOCK_PCH is not set
-# CONFIG_PTP_1588_CLOCK_VMW is not set
-# CONFIG_PUBLIC_KEY_ALGO_RSA is not set
-# CONFIG_PVPANIC is not set
-# CONFIG_PWM is not set
-# CONFIG_PWM_DEBUG is not set
-# CONFIG_PWM_FSL_FTM is not set
-# CONFIG_PWM_IMG is not set
-# CONFIG_PWM_JZ4740 is not set
-# CONFIG_PWM_MEDIATEK is not set
-# CONFIG_PWM_PCA9685 is not set
-CONFIG_PWRSEQ_EMMC=y
-# CONFIG_PWRSEQ_SD8787 is not set
-CONFIG_PWRSEQ_SIMPLE=y
-# CONFIG_QCA7000 is not set
-# CONFIG_QCA7000_SPI is not set
-# CONFIG_QCA7000_UART is not set
-# CONFIG_QCOM_EMAC is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set
-# CONFIG_QCOM_HIDMA is not set
-# CONFIG_QCOM_HIDMA_MGMT is not set
-# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set
-# CONFIG_QCOM_SPMI_ADC5 is not set
-# CONFIG_QCOM_SPMI_IADC is not set
-# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
-# CONFIG_QCOM_SPMI_VADC is not set
-# CONFIG_QED is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX6FS_FS is not set
-# CONFIG_QORIQ_CPUFREQ is not set
-# CONFIG_QORIQ_THERMAL is not set
-# CONFIG_QRTR is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_QUEUED_LOCK_STAT is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_QUOTA is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_QUOTA_DEBUG is not set
-# CONFIG_R3964 is not set
-# CONFIG_R6040 is not set
-# CONFIG_R8169 is not set
-# CONFIG_R8188EU is not set
-# CONFIG_R8712U is not set
-# CONFIG_R8723AU is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_RAID6_PQ_BENCHMARK is not set
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_RALINK is not set
-# CONFIG_RANDOM32_SELFTEST is not set
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_RANDOM_TRUST_BOOTLOADER=y
-CONFIG_RANDOM_TRUST_CPU=y
-# CONFIG_RAPIDIO is not set
-# CONFIG_RAS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_RBTREE_TEST is not set
-# CONFIG_RCU_BOOST is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=21
-# CONFIG_RCU_EQS_DEBUG is not set
-# CONFIG_RCU_EXPEDITE_BOOT is not set
-# CONFIG_RCU_EXPERT is not set
-CONFIG_RCU_KTHREAD_PRIO=0
-CONFIG_RCU_NEED_SEGCBLIST=y
-# CONFIG_RCU_PERF_TEST is not set
-# CONFIG_RCU_REF_SCALE_TEST is not set
-# CONFIG_RCU_SCALE_TEST is not set
-CONFIG_RCU_STALL_COMMON=y
-# CONFIG_RCU_STRICT_GRACE_PERIOD is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
-# CONFIG_RCU_TRACE is not set
-# CONFIG_RC_ATI_REMOTE is not set
-# CONFIG_RC_CORE is not set
-# CONFIG_RC_DECODERS is not set
-# CONFIG_RC_LOOPBACK is not set
-# CONFIG_RC_MAP is not set
-# CONFIG_RC_XBOX_DVD is not set
-# CONFIG_RDS is not set
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_GZIP is not set
-# CONFIG_RD_LZ4 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_RD_ZSTD is not set
-# CONFIG_READABLE_ASM is not set
-# CONFIG_READ_ONLY_THP_FOR_FS is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_REED_SOLOMON is not set
-# CONFIG_REED_SOLOMON_DEC8 is not set
-# CONFIG_REED_SOLOMON_ENC8 is not set
-# CONFIG_REED_SOLOMON_TEST is not set
-# CONFIG_REGMAP is not set
-# CONFIG_REGMAP_I2C is not set
-# CONFIG_REGMAP_MMIO is not set
-# CONFIG_REGMAP_SPI is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_88PG86X is not set
-# CONFIG_REGULATOR_ACT8865 is not set
-# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_ANATOP is not set
-# CONFIG_REGULATOR_DA9210 is not set
-# CONFIG_REGULATOR_DA9211 is not set
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FAN53555 is not set
-# CONFIG_REGULATOR_FAN53880 is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_GPIO is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_ISL9305 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_LP872X is not set
-# CONFIG_REGULATOR_LP8755 is not set
-# CONFIG_REGULATOR_LTC3589 is not set
-# CONFIG_REGULATOR_LTC3676 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX77620 is not set
-# CONFIG_REGULATOR_MAX77826 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-# CONFIG_REGULATOR_MAX8973 is not set
-# CONFIG_REGULATOR_MCP16502 is not set
-# CONFIG_REGULATOR_MP5416 is not set
-# CONFIG_REGULATOR_MP8859 is not set
-# CONFIG_REGULATOR_MP886X is not set
-# CONFIG_REGULATOR_MPQ7920 is not set
-# CONFIG_REGULATOR_MT6311 is not set
-# CONFIG_REGULATOR_PCA9450 is not set
-# CONFIG_REGULATOR_PFUZE100 is not set
-# CONFIG_REGULATOR_PV88060 is not set
-# CONFIG_REGULATOR_PV88080 is not set
-# CONFIG_REGULATOR_PV88090 is not set
-# CONFIG_REGULATOR_PWM is not set
-# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set
-# CONFIG_REGULATOR_RT4801 is not set
-# CONFIG_REGULATOR_RTMV20 is not set
-# CONFIG_REGULATOR_SLG51000 is not set
-# CONFIG_REGULATOR_SY8106A is not set
-# CONFIG_REGULATOR_SY8824X is not set
-# CONFIG_REGULATOR_SY8827N is not set
-# CONFIG_REGULATOR_TI_ABB is not set
-# CONFIG_REGULATOR_TPS51632 is not set
-# CONFIG_REGULATOR_TPS62360 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_TPS65132 is not set
-# CONFIG_REGULATOR_TPS6524X is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_VCTRL is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
-CONFIG_REISERFS_FS_XATTR=y
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_RELAY is not set
-# CONFIG_RELOCATABLE is not set
-# CONFIG_REMOTEPROC is not set
-# CONFIG_RENESAS_PHY is not set
-# CONFIG_RESET_ATH79 is not set
-# CONFIG_RESET_BERLIN is not set
-# CONFIG_RESET_BRCMSTB_RESCAL is not set
-# CONFIG_RESET_CONTROLLER is not set
-# CONFIG_RESET_IMX7 is not set
-# CONFIG_RESET_INTEL_GW is not set
-# CONFIG_RESET_LANTIQ is not set
-# CONFIG_RESET_LPC18XX is not set
-# CONFIG_RESET_MESON is not set
-# CONFIG_RESET_PISTACHIO is not set
-# CONFIG_RESET_SOCFPGA is not set
-# CONFIG_RESET_STM32 is not set
-# CONFIG_RESET_SUNXI is not set
-# CONFIG_RESET_TEGRA_BPMP is not set
-# CONFIG_RESET_TI_SYSCON is not set
-# CONFIG_RESET_ZYNQ is not set
-# CONFIG_RFD77402 is not set
-# CONFIG_RFD_FTL is not set
-CONFIG_RFKILL=y
-# CONFIG_RFKILL_FULL is not set
-# CONFIG_RFKILL_GPIO is not set
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_RFKILL_LEDS is not set
-# CONFIG_RFKILL_REGULATOR is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_RING_BUFFER_STARTUP_TEST is not set
-# CONFIG_RMI4_CORE is not set
-# CONFIG_RMNET is not set
-# CONFIG_ROCKCHIP_PHY is not set
-# CONFIG_ROCKER is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_ROSE is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
-# CONFIG_RPMSG_VIRTIO is not set
-# CONFIG_RPR0521 is not set
-# CONFIG_RSEQ is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_RTC_DEBUG is not set
-# CONFIG_RTC_DRV_ABB5ZES3 is not set
-# CONFIG_RTC_DRV_ABEOZ9 is not set
-# CONFIG_RTC_DRV_ABX80X is not set
-# CONFIG_RTC_DRV_ARMADA38X is not set
-# CONFIG_RTC_DRV_AU1XXX is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_CADENCE is not set
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1302 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1307_CENTURY is not set
-# CONFIG_RTC_DRV_DS1307_HWMON is not set
-# CONFIG_RTC_DRV_DS1343 is not set
-# CONFIG_RTC_DRV_DS1347 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1685_FAMILY is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_DS2404 is not set
-# CONFIG_RTC_DRV_DS3232 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_EM3027 is not set
-# CONFIG_RTC_DRV_EP93XX is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_FTRTC010 is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
-# CONFIG_RTC_DRV_HYM8563 is not set
-# CONFIG_RTC_DRV_ISL12022 is not set
-# CONFIG_RTC_DRV_ISL12026 is not set
-# CONFIG_RTC_DRV_ISL12057 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_JZ4740 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_M41T93 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_MAX6916 is not set
-# CONFIG_RTC_DRV_MCP795 is not set
-# CONFIG_RTC_DRV_MOXART is not set
-# CONFIG_RTC_DRV_MPC5121 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_MT2712 is not set
-# CONFIG_RTC_DRV_OMAP is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-# CONFIG_RTC_DRV_PCF2127 is not set
-# CONFIG_RTC_DRV_PCF85063 is not set
-# CONFIG_RTC_DRV_PCF8523 is not set
-# CONFIG_RTC_DRV_PCF85363 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_PS3 is not set
-# CONFIG_RTC_DRV_PT7C4338 is not set
-# CONFIG_RTC_DRV_R7301 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_RTC7301 is not set
-# CONFIG_RTC_DRV_RV3028 is not set
-# CONFIG_RTC_DRV_RV3029C2 is not set
-# CONFIG_RTC_DRV_RV3032 is not set
-# CONFIG_RTC_DRV_RV8803 is not set
-# CONFIG_RTC_DRV_RX4581 is not set
-# CONFIG_RTC_DRV_RX6110 is not set
-# CONFIG_RTC_DRV_RX8010 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_SD3078 is not set
-# CONFIG_RTC_DRV_SNVS is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_SUN6I is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_XGENE is not set
-# CONFIG_RTC_DRV_ZYNQMP is not set
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_NVMEM is not set
-CONFIG_RTC_SYSTOHC=y
-CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_RTL8192E is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTL8306_PHY is not set
-# CONFIG_RTL8366RB_PHY is not set
-# CONFIG_RTL8366S_PHY is not set
-# CONFIG_RTL8366_SMI is not set
-# CONFIG_RTL8366_SMI_DEBUG_FS is not set
-# CONFIG_RTL8367B_PHY is not set
-# CONFIG_RTL8367_PHY is not set
-# CONFIG_RTLLIB is not set
-# CONFIG_RTL_CARDS is not set
-# CONFIG_RTS5208 is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_RUNTIME_DEBUG is not set
-CONFIG_RUNTIME_TESTING_MENU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_RXKAD=y
-# CONFIG_S2IO is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_SAMSUNG_LAPTOP is not set
-# CONFIG_SATA_ACARD_AHCI is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_AHCI_PLATFORM is not set
-# CONFIG_SATA_DWC is not set
-# CONFIG_SATA_FSL is not set
-# CONFIG_SATA_HIGHBANK is not set
-# CONFIG_SATA_HOST is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_MOBILE_LPM_POLICY=0
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_RCAR is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SBC_FITPC2_WATCHDOG is not set
-CONFIG_SBITMAP=y
-# CONFIG_SC92031 is not set
-# CONFIG_SCA3000 is not set
-# CONFIG_SCACHE_DEBUGFS is not set
-# CONFIG_SCC is not set
-# CONFIG_SCD30_CORE is not set
-# CONFIG_SCF_TORTURE_TEST is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_AUTOGROUP is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_MC is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCHED_SMT is not set
-CONFIG_SCHED_STACK_END_CHECK=y
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_SCR24X is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_BNX2X_FCOE is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CHELSIO_FCOE is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_CXGB4_ISCSI is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_ESAS2R is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_FDOMAIN_PCI is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_HISI_SAS is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_ISCI is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_LPFC is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_MPT3SAS is not set
-# CONFIG_SCSI_MQ_DEFAULT is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-# CONFIG_SCSI_MVUMI is not set
-# CONFIG_SCSI_MYRB is not set
-# CONFIG_SCSI_MYRS is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_PMCRAID is not set
-CONFIG_SCSI_PROC_FS=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_SMARTPQI is not set
-# CONFIG_SCSI_SNIC is not set
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_UFSHCD is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_VIRTIO is not set
-# CONFIG_SCSI_WD719X is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_SDR_MAX2175 is not set
-# CONFIG_SDR_PLATFORM_DRIVERS is not set
-# CONFIG_SD_ADC_MODULATOR is not set
-# CONFIG_SECCOMP is not set
-CONFIG_SECTION_MISMATCH_WARN_ONLY=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_APPARMOR is not set
-CONFIG_SECURITY_DMESG_RESTRICT=y
-# CONFIG_SECURITY_LOADPIN is not set
-# CONFIG_SECURITY_LOCKDOWN_LSM is not set
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_SAFESETID is not set
-# CONFIG_SECURITY_SELINUX_AVC_STATS is not set
-# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
-# CONFIG_SECURITY_SELINUX_DEVELOP is not set
-# CONFIG_SECURITY_SELINUX_DISABLE is not set
-# CONFIG_SECURITY_SMACK is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_SECURITY_YAMA is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_SENSIRION_SGP30 is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_ACPI_POWER is not set
-# CONFIG_SENSORS_AD7314 is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADC128D818 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM1177 is not set
-# CONFIG_SENSORS_ADM1266 is not set
-# CONFIG_SENSORS_ADM1275 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADS1015 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_ADT7310 is not set
-# CONFIG_SENSORS_ADT7410 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_APDS990X is not set
-# CONFIG_SENSORS_APPLESMC is not set
-# CONFIG_SENSORS_AS370 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ASPEED is not set
-# CONFIG_SENSORS_ATK0110 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
-# CONFIG_SENSORS_BEL_PFE is not set
-# CONFIG_SENSORS_BH1770 is not set
-# CONFIG_SENSORS_BH1780 is not set
-# CONFIG_SENSORS_CORETEMP is not set
-# CONFIG_SENSORS_CORSAIR_CPRO is not set
-# CONFIG_SENSORS_DELL_SMM is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_DRIVETEMP is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_DS620 is not set
-# CONFIG_SENSORS_EMC1403 is not set
-# CONFIG_SENSORS_EMC2103 is not set
-# CONFIG_SENSORS_EMC6W201 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_FAM15H_POWER is not set
-# CONFIG_SENSORS_FSCHMD is not set
-# CONFIG_SENSORS_FTSTEUTATES is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_G762 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_GPIO_FAN is not set
-# CONFIG_SENSORS_GSC is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_SENSORS_HIH6130 is not set
-# CONFIG_SENSORS_HMC5843 is not set
-# CONFIG_SENSORS_HMC5843_I2C is not set
-# CONFIG_SENSORS_HMC5843_SPI is not set
-# CONFIG_SENSORS_HTU21 is not set
-# CONFIG_SENSORS_I5500 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_IBM_CFFPS is not set
-# CONFIG_SENSORS_IIO_HWMON is not set
-# CONFIG_SENSORS_INA209 is not set
-# CONFIG_SENSORS_INA2XX is not set
-# CONFIG_SENSORS_INA3221 is not set
-# CONFIG_SENSORS_INSPUR_IPSPS is not set
-# CONFIG_SENSORS_IR35221 is not set
-# CONFIG_SENSORS_IR38064 is not set
-# CONFIG_SENSORS_IRPS5401 is not set
-# CONFIG_SENSORS_ISL29018 is not set
-# CONFIG_SENSORS_ISL29028 is not set
-# CONFIG_SENSORS_ISL68137 is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_JC42 is not set
-# CONFIG_SENSORS_K10TEMP is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_LINEAGE is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LM25066 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LM95234 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_LM95245 is not set
-# CONFIG_SENSORS_LTC2945 is not set
-# CONFIG_SENSORS_LTC2947_I2C is not set
-# CONFIG_SENSORS_LTC2947_SPI is not set
-# CONFIG_SENSORS_LTC2978 is not set
-# CONFIG_SENSORS_LTC2990 is not set
-# CONFIG_SENSORS_LTC3815 is not set
-# CONFIG_SENSORS_LTC4151 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4222 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LTC4260 is not set
-# CONFIG_SENSORS_LTC4261 is not set
-# CONFIG_SENSORS_LTQ_CPUTEMP is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX16064 is not set
-# CONFIG_SENSORS_MAX16065 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX16601 is not set
-# CONFIG_SENSORS_MAX1668 is not set
-# CONFIG_SENSORS_MAX197 is not set
-# CONFIG_SENSORS_MAX20730 is not set
-# CONFIG_SENSORS_MAX20751 is not set
-# CONFIG_SENSORS_MAX31722 is not set
-# CONFIG_SENSORS_MAX31730 is not set
-# CONFIG_SENSORS_MAX31785 is not set
-# CONFIG_SENSORS_MAX31790 is not set
-# CONFIG_SENSORS_MAX34440 is not set
-# CONFIG_SENSORS_MAX6621 is not set
-# CONFIG_SENSORS_MAX6639 is not set
-# CONFIG_SENSORS_MAX6642 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_MAX6697 is not set
-# CONFIG_SENSORS_MAX8688 is not set
-# CONFIG_SENSORS_MCP3021 is not set
-# CONFIG_SENSORS_MP2975 is not set
-# CONFIG_SENSORS_MR75203 is not set
-# CONFIG_SENSORS_NCT6683 is not set
-# CONFIG_SENSORS_NCT6775 is not set
-# CONFIG_SENSORS_NCT7802 is not set
-# CONFIG_SENSORS_NCT7904 is not set
-# CONFIG_SENSORS_NPCM7XX is not set
-# CONFIG_SENSORS_NSA320 is not set
-# CONFIG_SENSORS_NTC_THERMISTOR is not set
-# CONFIG_SENSORS_OCC_P8_I2C is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_PMBUS is not set
-# CONFIG_SENSORS_POWR1220 is not set
-# CONFIG_SENSORS_PWM_FAN is not set
-# CONFIG_SENSORS_PXE1610 is not set
-# CONFIG_SENSORS_RM3100_I2C is not set
-# CONFIG_SENSORS_RM3100_SPI is not set
-# CONFIG_SENSORS_SCH5627 is not set
-# CONFIG_SENSORS_SCH5636 is not set
-# CONFIG_SENSORS_SCH56XX_COMMON is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SHT21 is not set
-# CONFIG_SENSORS_SHT3x is not set
-# CONFIG_SENSORS_SHTC1 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMM665 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_STTS751 is not set
-# CONFIG_SENSORS_TC654 is not set
-# CONFIG_SENSORS_TC74 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP102 is not set
-# CONFIG_SENSORS_TMP103 is not set
-# CONFIG_SENSORS_TMP108 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_TMP513 is not set
-# CONFIG_SENSORS_TPS23861 is not set
-# CONFIG_SENSORS_TPS40422 is not set
-# CONFIG_SENSORS_TPS53679 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_TSL2563 is not set
-# CONFIG_SENSORS_UCD9000 is not set
-# CONFIG_SENSORS_UCD9200 is not set
-# CONFIG_SENSORS_VEXPRESS is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VIA_CPUTEMP is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83773G is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83795 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_XDPE122 is not set
-# CONFIG_SENSORS_XGENE is not set
-# CONFIG_SENSORS_ZL6100 is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_16550A_VARIANTS=y
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_ASPEED_VUART is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_DMA=y
-# CONFIG_SERIAL_8250_DW is not set
-# CONFIG_SERIAL_8250_EM is not set
-# CONFIG_SERIAL_8250_EXAR is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_FINTEK is not set
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
-# CONFIG_SERIAL_8250_INGENIC is not set
-# CONFIG_SERIAL_8250_LPSS is not set
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_MID is not set
-# CONFIG_SERIAL_8250_MOXA is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_RSA is not set
-# CONFIG_SERIAL_8250_RT288X is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-# CONFIG_SERIAL_ARC is not set
-# CONFIG_SERIAL_BCM63XX is not set
-# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_DEV_BUS is not set
-CONFIG_SERIAL_EARLYCON=y
-# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
-# CONFIG_SERIAL_FSL_LINFLEXUART is not set
-# CONFIG_SERIAL_FSL_LPUART is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX310X is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_PCH_UART is not set
-# CONFIG_SERIAL_RP2 is not set
-# CONFIG_SERIAL_SC16IS7XX is not set
-# CONFIG_SERIAL_SCCNXP is not set
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_SIFIVE is not set
-# CONFIG_SERIAL_SPRD is not set
-# CONFIG_SERIAL_STM32 is not set
-# CONFIG_SERIAL_ST_ASC is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_UARTLITE is not set
-# CONFIG_SERIAL_XILINX_PS_UART is not set
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_APBPS2 is not set
-# CONFIG_SERIO_ARC_PS2 is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_GPIO_PS2 is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_PS2MULT is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_SUN4I_PS2 is not set
-# CONFIG_SFC is not set
-# CONFIG_SFC_FALCON is not set
-# CONFIG_SFI is not set
-# CONFIG_SFP is not set
-# CONFIG_SF_PDMA is not set
-# CONFIG_SGETMASK_SYSCALL is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP30 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SGI_MFD_IOC3 is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_SG_POOL is not set
-# CONFIG_SG_SPLIT is not set
-CONFIG_SHMEM=y
-# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
-# CONFIG_SH_ETH is not set
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_SH_TIMER_MTU2 is not set
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SI1133 is not set
-# CONFIG_SI1145 is not set
-# CONFIG_SI7005 is not set
-# CONFIG_SI7020 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SIGNALFD=y
-# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_SIMPLE_PM_BUS is not set
-# CONFIG_SIOX is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLABINFO=y
-CONFIG_SLAB_FREELIST_HARDENED=y
-CONFIG_SLAB_FREELIST_RANDOM=y
-CONFIG_SLAB_MERGE_DEFAULT=y
-# CONFIG_SLHC is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_SLIMBUS is not set
-# CONFIG_SLIP is not set
-# CONFIG_SLOB is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_CPU_PARTIAL=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_SMARTJOYPLUS_FF is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMC9194 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMP is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_SMS_SDIO_DRV is not set
-# CONFIG_SMS_USB_DRV is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_SND is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ALOOP is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_ASIHPI is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_ATMEL_AC97C is not set
-# CONFIG_SND_ATMEL_SOC is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AUDIO_GRAPH_CARD is not set
-# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BCD2000 is not set
-# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_DESIGNWARE_I2S is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_EDMA_SOC is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FIREWIRE is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDA_INTEL_DETECT_DMIC is not set
-# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
-CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
-CONFIG_SND_HDA_PREALLOC_SIZE=64
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_HWDEP is not set
-# CONFIG_SND_I2S_HI6210_I2S is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_ISA is not set
-# CONFIG_SND_JZ4740_SOC_I2S is not set
-# CONFIG_SND_KIRKWOOD_SOC is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_LOLA is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-CONFIG_SND_MAX_CARDS=16
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_MIPS is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MPC52xx_SOC_EFIKA is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_MXS_SOC is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_OXYGEN is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_PCM is not set
-# CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_PCM_OSS is not set
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_PCM_TIMER is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-# CONFIG_SND_POWERPC_SOC is not set
-# CONFIG_SND_PPC is not set
-CONFIG_SND_PROC_FS=y
-# CONFIG_SND_RAWMIDI is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_SE6X is not set
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_SIMPLE_CARD is not set
-# CONFIG_SND_SIMPLE_SCU_CARD is not set
-# CONFIG_SND_SIS7019 is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_ADAU1701 is not set
-# CONFIG_SND_SOC_ADAU1761_I2C is not set
-# CONFIG_SND_SOC_ADAU1761_SPI is not set
-# CONFIG_SND_SOC_ADAU7002 is not set
-# CONFIG_SND_SOC_ADAU7118_HW is not set
-# CONFIG_SND_SOC_ADAU7118_I2C is not set
-# CONFIG_SND_SOC_AK4104 is not set
-# CONFIG_SND_SOC_AK4118 is not set
-# CONFIG_SND_SOC_AK4458 is not set
-# CONFIG_SND_SOC_AK4554 is not set
-# CONFIG_SND_SOC_AK4613 is not set
-# CONFIG_SND_SOC_AK4642 is not set
-# CONFIG_SND_SOC_AK5386 is not set
-# CONFIG_SND_SOC_AK5558 is not set
-# CONFIG_SND_SOC_ALC5623 is not set
-# CONFIG_SND_SOC_AMD_ACP is not set
-# CONFIG_SND_SOC_AMD_ACP3x is not set
-# CONFIG_SND_SOC_AMD_RENOIR is not set
-# CONFIG_SND_SOC_AU1XAUDIO is not set
-# CONFIG_SND_SOC_AU1XPSC is not set
-# CONFIG_SND_SOC_BD28623 is not set
-# CONFIG_SND_SOC_BT_SCO is not set
-# CONFIG_SND_SOC_CS35L32 is not set
-# CONFIG_SND_SOC_CS35L33 is not set
-# CONFIG_SND_SOC_CS35L34 is not set
-# CONFIG_SND_SOC_CS35L35 is not set
-# CONFIG_SND_SOC_CS35L36 is not set
-# CONFIG_SND_SOC_CS4234 is not set
-# CONFIG_SND_SOC_CS4265 is not set
-# CONFIG_SND_SOC_CS4270 is not set
-# CONFIG_SND_SOC_CS4271 is not set
-# CONFIG_SND_SOC_CS4271_I2C is not set
-# CONFIG_SND_SOC_CS4271_SPI is not set
-# CONFIG_SND_SOC_CS42L42 is not set
-# CONFIG_SND_SOC_CS42L51_I2C is not set
-# CONFIG_SND_SOC_CS42L52 is not set
-# CONFIG_SND_SOC_CS42L56 is not set
-# CONFIG_SND_SOC_CS42L73 is not set
-# CONFIG_SND_SOC_CS42XX8_I2C is not set
-# CONFIG_SND_SOC_CS43130 is not set
-# CONFIG_SND_SOC_CS4341 is not set
-# CONFIG_SND_SOC_CS4349 is not set
-# CONFIG_SND_SOC_CS53L30 is not set
-# CONFIG_SND_SOC_CX2072X is not set
-# CONFIG_SND_SOC_DA7213 is not set
-# CONFIG_SND_SOC_DIO2125 is not set
-# CONFIG_SND_SOC_DMIC is not set
-# CONFIG_SND_SOC_ES7134 is not set
-# CONFIG_SND_SOC_ES7241 is not set
-# CONFIG_SND_SOC_ES8316 is not set
-# CONFIG_SND_SOC_ES8328 is not set
-# CONFIG_SND_SOC_ES8328_I2C is not set
-# CONFIG_SND_SOC_ES8328_SPI is not set
-# CONFIG_SND_SOC_EUKREA_TLV320 is not set
-# CONFIG_SND_SOC_FSL_ASOC_CARD is not set
-# CONFIG_SND_SOC_FSL_ASRC is not set
-# CONFIG_SND_SOC_FSL_AUDMIX is not set
-# CONFIG_SND_SOC_FSL_ESAI is not set
-# CONFIG_SND_SOC_FSL_MICFIL is not set
-# CONFIG_SND_SOC_FSL_SAI is not set
-# CONFIG_SND_SOC_FSL_SPDIF is not set
-# CONFIG_SND_SOC_FSL_SSI is not set
-# CONFIG_SND_SOC_GTM601 is not set
-# CONFIG_SND_SOC_ICS43432 is not set
-# CONFIG_SND_SOC_IMG is not set
-# CONFIG_SND_SOC_IMX_AUDMIX is not set
-# CONFIG_SND_SOC_IMX_AUDMUX is not set
-# CONFIG_SND_SOC_IMX_ES8328 is not set
-# CONFIG_SND_SOC_IMX_SPDIF is not set
-# CONFIG_SND_SOC_IMX_WM8962 is not set
-# CONFIG_SND_SOC_INNO_RK3036 is not set
-# CONFIG_SND_SOC_INTEL_APL is not set
-# CONFIG_SND_SOC_INTEL_BAYTRAIL is not set
-# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_CATPT is not set
-# CONFIG_SND_SOC_INTEL_CFL is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH is not set
-# CONFIG_SND_SOC_INTEL_CML_H is not set
-# CONFIG_SND_SOC_INTEL_CML_LP is not set
-# CONFIG_SND_SOC_INTEL_CNL is not set
-# CONFIG_SND_SOC_INTEL_GLK is not set
-# CONFIG_SND_SOC_INTEL_HASWELL is not set
-# CONFIG_SND_SOC_INTEL_KBL is not set
-# CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH is not set
-# CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH is not set
-# CONFIG_SND_SOC_INTEL_KEEMBAY is not set
-# CONFIG_SND_SOC_INTEL_SKL is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKYLAKE is not set
-# CONFIG_SND_SOC_INTEL_SST is not set
-CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
-# CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES is not set
-# CONFIG_SND_SOC_JZ4725B_CODEC is not set
-# CONFIG_SND_SOC_JZ4740_CODEC is not set
-# CONFIG_SND_SOC_JZ4770_CODEC is not set
-# CONFIG_SND_SOC_MA120X0P is not set
-# CONFIG_SND_SOC_MAX9759 is not set
-# CONFIG_SND_SOC_MAX98088 is not set
-# CONFIG_SND_SOC_MAX98357A is not set
-# CONFIG_SND_SOC_MAX98373 is not set
-# CONFIG_SND_SOC_MAX98373_I2C is not set
-# CONFIG_SND_SOC_MAX98390 is not set
-# CONFIG_SND_SOC_MAX98504 is not set
-# CONFIG_SND_SOC_MAX9860 is not set
-# CONFIG_SND_SOC_MAX9867 is not set
-# CONFIG_SND_SOC_MAX98927 is not set
-# CONFIG_SND_SOC_MEDIATEK is not set
-# CONFIG_SND_SOC_MPC5200_AC97 is not set
-# CONFIG_SND_SOC_MPC5200_I2S is not set
-# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
-# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
-# CONFIG_SND_SOC_MT2701 is not set
-# CONFIG_SND_SOC_MT6351 is not set
-# CONFIG_SND_SOC_MT6358 is not set
-# CONFIG_SND_SOC_MT6660 is not set
-# CONFIG_SND_SOC_MT6797 is not set
-# CONFIG_SND_SOC_MT8173 is not set
-# CONFIG_SND_SOC_MT8183 is not set
-# CONFIG_SND_SOC_MTK_BTCVSD is not set
-# CONFIG_SND_SOC_NAU8540 is not set
-# CONFIG_SND_SOC_NAU8810 is not set
-# CONFIG_SND_SOC_NAU8822 is not set
-# CONFIG_SND_SOC_NAU8824 is not set
-# CONFIG_SND_SOC_PCM1681 is not set
-# CONFIG_SND_SOC_PCM1789_I2C is not set
-# CONFIG_SND_SOC_PCM1792A is not set
-# CONFIG_SND_SOC_PCM179X_I2C is not set
-# CONFIG_SND_SOC_PCM179X_SPI is not set
-# CONFIG_SND_SOC_PCM186X_I2C is not set
-# CONFIG_SND_SOC_PCM186X_SPI is not set
-# CONFIG_SND_SOC_PCM3060_I2C is not set
-# CONFIG_SND_SOC_PCM3060_SPI is not set
-# CONFIG_SND_SOC_PCM3168A_I2C is not set
-# CONFIG_SND_SOC_PCM3168A_SPI is not set
-# CONFIG_SND_SOC_PCM512x_I2C is not set
-# CONFIG_SND_SOC_PCM512x_SPI is not set
-# CONFIG_SND_SOC_QCOM is not set
-# CONFIG_SND_SOC_RK3328 is not set
-# CONFIG_SND_SOC_RT5616 is not set
-# CONFIG_SND_SOC_RT5631 is not set
-# CONFIG_SND_SOC_RT5677_SPI is not set
-# CONFIG_SND_SOC_SGTL5000 is not set
-# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
-# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
-# CONFIG_SND_SOC_SOF_TOPLEVEL is not set
-# CONFIG_SND_SOC_SPDIF is not set
-# CONFIG_SND_SOC_SSM2305 is not set
-# CONFIG_SND_SOC_SSM2602_I2C is not set
-# CONFIG_SND_SOC_SSM2602_SPI is not set
-# CONFIG_SND_SOC_SSM4567 is not set
-# CONFIG_SND_SOC_STA32X is not set
-# CONFIG_SND_SOC_STA350 is not set
-# CONFIG_SND_SOC_STI_SAS is not set
-# CONFIG_SND_SOC_TAS2552 is not set
-# CONFIG_SND_SOC_TAS2562 is not set
-# CONFIG_SND_SOC_TAS2764 is not set
-# CONFIG_SND_SOC_TAS2770 is not set
-# CONFIG_SND_SOC_TAS5086 is not set
-# CONFIG_SND_SOC_TAS571X is not set
-# CONFIG_SND_SOC_TAS5720 is not set
-# CONFIG_SND_SOC_TAS6424 is not set
-# CONFIG_SND_SOC_TDA7419 is not set
-# CONFIG_SND_SOC_TFA9879 is not set
-# CONFIG_SND_SOC_TLV320ADCX140 is not set
-# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
-# CONFIG_SND_SOC_TLV320AIC31XX is not set
-# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
-# CONFIG_SND_SOC_TLV320AIC3X is not set
-# CONFIG_SND_SOC_TPA6130A2 is not set
-# CONFIG_SND_SOC_TS3A227E is not set
-# CONFIG_SND_SOC_TSCS42XX is not set
-# CONFIG_SND_SOC_TSCS454 is not set
-# CONFIG_SND_SOC_UDA1334 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8523 is not set
-# CONFIG_SND_SOC_WM8524 is not set
-# CONFIG_SND_SOC_WM8580 is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8728 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8737 is not set
-# CONFIG_SND_SOC_WM8741 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8770 is not set
-# CONFIG_SND_SOC_WM8776 is not set
-# CONFIG_SND_SOC_WM8782 is not set
-# CONFIG_SND_SOC_WM8804_I2C is not set
-# CONFIG_SND_SOC_WM8804_SPI is not set
-# CONFIG_SND_SOC_WM8903 is not set
-# CONFIG_SND_SOC_WM8904 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8962 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8978 is not set
-# CONFIG_SND_SOC_WM8985 is not set
-# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
-# CONFIG_SND_SOC_XILINX_I2S is not set
-# CONFIG_SND_SOC_XILINX_SPDIF is not set
-# CONFIG_SND_SOC_XTFPGA_I2S is not set
-# CONFIG_SND_SOC_ZL38060 is not set
-# CONFIG_SND_SOC_ZX_AUD96P22 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI is not set
-# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set
-# CONFIG_SND_SUN4I_CODEC is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_TIMER is not set
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_6FIRE is not set
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_HIFACE is not set
-# CONFIG_SND_USB_POD is not set
-# CONFIG_SND_USB_PODHD is not set
-# CONFIG_SND_USB_TONEPORT is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_US122L is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_VARIAX is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_WAVEFRONT is not set
-CONFIG_SND_X86=y
-# CONFIG_SND_XEN_FRONTEND is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set
-# CONFIG_SOCK_CGROUP_DATA is not set
-# CONFIG_SOC_AM33XX is not set
-# CONFIG_SOC_AM43XX is not set
-# CONFIG_SOC_BRCMSTB is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_SOC_DRA7XX is not set
-# CONFIG_SOC_HAS_OMAP2_SDRC is not set
-# CONFIG_SOC_OMAP5 is not set
-# CONFIG_SOC_TI is not set
-# CONFIG_SOFTLOCKUP_DETECTOR is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_SONYPI is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_SOUND is not set
-# CONFIG_SOUNDWIRE is not set
-# CONFIG_SOUND_OSS_CORE is not set
-# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_SP5100_TCO is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-# CONFIG_SPARSE_IRQ is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_SPEAKUP is not set
-# CONFIG_SPI is not set
-# CONFIG_SPINLOCK_TEST is not set
-# CONFIG_SPI_ALTERA is not set
-# CONFIG_SPI_AMD is not set
-# CONFIG_SPI_AU1550 is not set
-# CONFIG_SPI_AXI_SPI_ENGINE is not set
-# CONFIG_SPI_BCM2835 is not set
-# CONFIG_SPI_BCM_QSPI is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_BUTTERFLY is not set
-# CONFIG_SPI_CADENCE is not set
-# CONFIG_SPI_CADENCE_QUADSPI is not set
-# CONFIG_SPI_DEBUG is not set
-# CONFIG_SPI_DESIGNWARE is not set
-# CONFIG_SPI_FSL_DSPI is not set
-# CONFIG_SPI_FSL_ESPI is not set
-# CONFIG_SPI_FSL_SPI is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_GPIO_OLD is not set
-# CONFIG_SPI_IMG_SPFI is not set
-# CONFIG_SPI_LANTIQ_SSC is not set
-# CONFIG_SPI_LM70_LLP is not set
-# CONFIG_SPI_LOOPBACK_TEST is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_SPI_MEM is not set
-# CONFIG_SPI_MPC52xx is not set
-# CONFIG_SPI_MPC52xx_PSC is not set
-# CONFIG_SPI_MTK_QUADSPI is not set
-# CONFIG_SPI_MUX is not set
-# CONFIG_SPI_MXIC is not set
-# CONFIG_SPI_NXP_FLEXSPI is not set
-# CONFIG_SPI_OCTEON is not set
-# CONFIG_SPI_OC_TINY is not set
-# CONFIG_SPI_ORION is not set
-# CONFIG_SPI_PL022 is not set
-# CONFIG_SPI_PPC4xx is not set
-# CONFIG_SPI_PXA2XX is not set
-# CONFIG_SPI_PXA2XX_PCI is not set
-# CONFIG_SPI_QCOM_QSPI is not set
-# CONFIG_SPI_ROCKCHIP is not set
-# CONFIG_SPI_S3C64XX is not set
-# CONFIG_SPI_SC18IS602 is not set
-# CONFIG_SPI_SIFIVE is not set
-# CONFIG_SPI_SLAVE is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_THUNDERX is not set
-# CONFIG_SPI_TI_QSPI is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_SPI_TOPCLIFF_PCH is not set
-# CONFIG_SPI_XCOMM is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_XWAY is not set
-# CONFIG_SPI_ZYNQMP_GQSPI is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_SPMI is not set
-# CONFIG_SPS30 is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
-# CONFIG_SQUASHFS_DECOMP_MULTI is not set
-CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
-# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
-CONFIG_SQUASHFS_EMBEDDED=y
-# CONFIG_SQUASHFS_FILE_CACHE is not set
-CONFIG_SQUASHFS_FILE_DIRECT=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_LZ4 is not set
-# CONFIG_SQUASHFS_LZO is not set
-# CONFIG_SQUASHFS_XATTR is not set
-CONFIG_SQUASHFS_XZ=y
-# CONFIG_SQUASHFS_ZLIB is not set
-# CONFIG_SQUASHFS_ZSTD is not set
-# CONFIG_SRAM is not set
-# CONFIG_SRF04 is not set
-# CONFIG_SRF08 is not set
-# CONFIG_SSB is not set
-# CONFIG_SSB_DEBUG is not set
-# CONFIG_SSB_DRIVER_GPIO is not set
-# CONFIG_SSB_HOST_SOC is not set
-# CONFIG_SSB_PCMCIAHOST is not set
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSFDC is not set
-# CONFIG_STACKPROTECTOR is not set
-# CONFIG_STACKPROTECTOR_STRONG is not set
-# CONFIG_STACKTRACE is not set
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_STACK_TRACER is not set
-# CONFIG_STACK_VALIDATION is not set
-CONFIG_STAGING=y
-# CONFIG_STAGING_BOARD is not set
-# CONFIG_STAGING_GASKET_FRAMEWORK is not set
-# CONFIG_STAGING_MEDIA is not set
-CONFIG_STANDALONE=y
-# CONFIG_STATIC_KEYS_SELFTEST is not set
-# CONFIG_STATIC_USERMODEHELPER is not set
-CONFIG_STDBINUTILS=y
-# CONFIG_STE10XP is not set
-# CONFIG_STE_MODEM_RPROC is not set
-# CONFIG_STK3310 is not set
-# CONFIG_STK8312 is not set
-# CONFIG_STK8BA50 is not set
-# CONFIG_STM is not set
-# CONFIG_STMMAC_ETH is not set
-# CONFIG_STMMAC_PCI is not set
-# CONFIG_STMMAC_PLATFORM is not set
-# CONFIG_STM_DUMMY is not set
-# CONFIG_STM_SOURCE_CONSOLE is not set
-CONFIG_STP=y
-# CONFIG_STREAM_PARSER is not set
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_STRICT_MODULE_RWX=y
-# CONFIG_STRING_SELFTEST is not set
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_STX104 is not set
-# CONFIG_ST_UVIS25 is not set
-# CONFIG_SUN4I_GPADC is not set
-# CONFIG_SUN50I_DE2_BUS is not set
-# CONFIG_SUN50I_ERRATUM_UNKNOWN1 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_SUNRPC_DEBUG is not set
-CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SUNXI_SRAM is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_SURFACE_3_BUTTON is not set
-# CONFIG_SUSPEND is not set
-# CONFIG_SUSPEND_SKIP_SYNC is not set
-CONFIG_SWAP=y
-# CONFIG_SWCONFIG is not set
-# CONFIG_SWCONFIG_B53 is not set
-# CONFIG_SWCONFIG_B53_MDIO_DRIVER is not set
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-# CONFIG_SWCONFIG_LEDS is not set
-# CONFIG_SW_SYNC is not set
-# CONFIG_SX9310 is not set
-# CONFIG_SX9500 is not set
-# CONFIG_SXGBE_ETH is not set
-CONFIG_SYMBOLIC_ERRNAME=y
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_SYNC_FILE is not set
-# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
-# CONFIG_SYNTH_EVENTS is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_SYSCON_REBOOT_MODE is not set
-CONFIG_SYSCTL=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SYSFS=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_SYSTEMPORT is not set
-# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
-# CONFIG_SYSTEM_DATA_VERIFICATION is not set
-# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
-CONFIG_SYSTEM_TRUSTED_KEYS=""
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_T5403 is not set
-# CONFIG_TARGET_CORE is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_TASKS_RCU is not set
-# CONFIG_TASK_XACCT is not set
-# CONFIG_TC35815 is not set
-# CONFIG_TCG_ATMEL is not set
-# CONFIG_TCG_CRB is not set
-# CONFIG_TCG_FTPM_TEE is not set
-# CONFIG_TCG_INFINEON is not set
-# CONFIG_TCG_NSC is not set
-# CONFIG_TCG_ST33_I2C is not set
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_TIS_I2C_ATMEL is not set
-# CONFIG_TCG_TIS_I2C_INFINEON is not set
-# CONFIG_TCG_TIS_I2C_NUVOTON is not set
-# CONFIG_TCG_TIS_SPI is not set
-# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
-# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TCG_VTPM_PROXY is not set
-# CONFIG_TCG_XEN is not set
-# CONFIG_TCIC is not set
-CONFIG_TCP_CONG_ADVANCED=y
-# CONFIG_TCP_CONG_BBR is not set
-# CONFIG_TCP_CONG_BIC is not set
-# CONFIG_TCP_CONG_CDG is not set
-CONFIG_TCP_CONG_CUBIC=y
-# CONFIG_TCP_CONG_DCTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_NV is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_WESTWOOD is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_TCS3414 is not set
-# CONFIG_TCS3472 is not set
-# CONFIG_TEE is not set
-# CONFIG_TEGRA_AHB is not set
-# CONFIG_TEGRA_HOST1X is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TERANETICS_PHY is not set
-# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
-# CONFIG_TEST_BITFIELD is not set
-# CONFIG_TEST_BITMAP is not set
-# CONFIG_TEST_BITOPS is not set
-# CONFIG_TEST_BLACKHOLE_DEV is not set
-# CONFIG_TEST_BPF is not set
-# CONFIG_TEST_FIRMWARE is not set
-# CONFIG_TEST_FREE_PAGES is not set
-# CONFIG_TEST_HASH is not set
-# CONFIG_TEST_HEXDUMP is not set
-# CONFIG_TEST_IDA is not set
-# CONFIG_TEST_KASAN_MODULE is not set
-# CONFIG_TEST_KMOD is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_TEST_LKM is not set
-# CONFIG_TEST_LOCKUP is not set
-# CONFIG_TEST_MEMCAT_P is not set
-# CONFIG_TEST_MEMINIT is not set
-# CONFIG_TEST_MIN_HEAP is not set
-# CONFIG_TEST_OVERFLOW is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_TEST_PRINTF is not set
-# CONFIG_TEST_RHASHTABLE is not set
-# CONFIG_TEST_SORT is not set
-# CONFIG_TEST_STACKINIT is not set
-# CONFIG_TEST_STATIC_KEYS is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_STRSCPY is not set
-# CONFIG_TEST_SYSCTL is not set
-# CONFIG_TEST_UBSAN is not set
-# CONFIG_TEST_UDELAY is not set
-# CONFIG_TEST_USER_COPY is not set
-# CONFIG_TEST_UUID is not set
-# CONFIG_TEST_VMALLOC is not set
-# CONFIG_TEST_XARRAY is not set
-CONFIG_TEXTSEARCH=y
-# CONFIG_TEXTSEARCH_BM is not set
-# CONFIG_TEXTSEARCH_FSM is not set
-# CONFIG_TEXTSEARCH_KMP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_EMULATION is not set
-# CONFIG_THERMAL_GOV_BANG_BANG is not set
-# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_THERMAL_MMIO is not set
-# CONFIG_THERMAL_NETLINK is not set
-# CONFIG_THERMAL_STATISTICS is not set
-# CONFIG_THERMAL_WRITABLE_TRIPS is not set
-# CONFIG_THINKPAD_ACPI is not set
-CONFIG_THIN_ARCHIVES=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_THUMB2_KERNEL is not set
-# CONFIG_THUNDERBOLT is not set
-# CONFIG_THUNDER_NIC_BGX is not set
-# CONFIG_THUNDER_NIC_PF is not set
-# CONFIG_THUNDER_NIC_RGX is not set
-# CONFIG_THUNDER_NIC_VF is not set
-# CONFIG_TICK_CPU_ACCOUNTING is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_TIFM_CORE is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_TIMB_DMA is not set
-CONFIG_TIMERFD=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_TIME_NS is not set
-# CONFIG_TINYDRM_HX8357D is not set
-# CONFIG_TINYDRM_ILI9225 is not set
-# CONFIG_TINYDRM_ILI9341 is not set
-# CONFIG_TINYDRM_ILI9486 is not set
-# CONFIG_TINYDRM_MI0283QT is not set
-# CONFIG_TINYDRM_REPAPER is not set
-# CONFIG_TINYDRM_ST7586 is not set
-# CONFIG_TINYDRM_ST7735R is not set
-CONFIG_TINY_RCU=y
-# CONFIG_TIPC is not set
-# CONFIG_TI_ADC081C is not set
-# CONFIG_TI_ADC0832 is not set
-# CONFIG_TI_ADC084S021 is not set
-# CONFIG_TI_ADC108S102 is not set
-# CONFIG_TI_ADC12138 is not set
-# CONFIG_TI_ADC128S052 is not set
-# CONFIG_TI_ADC161S626 is not set
-# CONFIG_TI_ADS1015 is not set
-# CONFIG_TI_ADS124S08 is not set
-# CONFIG_TI_ADS7950 is not set
-# CONFIG_TI_ADS8344 is not set
-# CONFIG_TI_ADS8688 is not set
-# CONFIG_TI_AM335X_ADC is not set
-# CONFIG_TI_CPSW is not set
-# CONFIG_TI_CPSW_ALE is not set
-# CONFIG_TI_CPSW_PHY_SEL is not set
-# CONFIG_TI_CPTS is not set
-# CONFIG_TI_DAC082S085 is not set
-# CONFIG_TI_DAC5571 is not set
-# CONFIG_TI_DAC7311 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_TI_DAC7612 is not set
-# CONFIG_TI_DAVINCI_CPDMA is not set
-# CONFIG_TI_DAVINCI_MDIO is not set
-# CONFIG_TI_ST is not set
-# CONFIG_TI_SYSCON_RESET is not set
-# CONFIG_TI_TLC4541 is not set
-# CONFIG_TLAN is not set
-# CONFIG_TLS is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_TMP006 is not set
-# CONFIG_TMP007 is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_INODE64 is not set
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TOPSTAR_LAPTOP is not set
-# CONFIG_TORTURE_TEST is not set
-# CONFIG_TOSHIBA_HAPS is not set
-# CONFIG_TOUCHSCREEN_88PM860X is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_BU21029 is not set
-# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
-# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
-# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
-# CONFIG_TOUCHSCREEN_CY8CTMA140 is not set
-# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
-# CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_DA9052 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
-# CONFIG_TOUCHSCREEN_EKTF2127 is not set
-# CONFIG_TOUCHSCREEN_ELAN is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_EXC3000 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GOODIX is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_HIDEEP is not set
-# CONFIG_TOUCHSCREEN_HP600 is not set
-# CONFIG_TOUCHSCREEN_HP7XX is not set
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_ILI210X is not set
-# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_IPAQ_MICRO is not set
-# CONFIG_TOUCHSCREEN_IPROC is not set
-# CONFIG_TOUCHSCREEN_IQS5XX is not set
-# CONFIG_TOUCHSCREEN_LPC32XX is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_MC13783 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
-# CONFIG_TOUCHSCREEN_MIGOR is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_MMS114 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MX25 is not set
-# CONFIG_TOUCHSCREEN_MXS_LRADC is not set
-# CONFIG_TOUCHSCREEN_PCAP is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_PROPERTIES is not set
-# CONFIG_TOUCHSCREEN_RASPBERRYPI_FW is not set
-# CONFIG_TOUCHSCREEN_RM_TS is not set
-# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
-# CONFIG_TOUCHSCREEN_RPI_FT5406 is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_S6SY761 is not set
-# CONFIG_TOUCHSCREEN_SILEAD is not set
-# CONFIG_TOUCHSCREEN_SIS_I2C is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_STMFTS is not set
-# CONFIG_TOUCHSCREEN_STMPE is not set
-# CONFIG_TOUCHSCREEN_SUN4I is not set
-# CONFIG_TOUCHSCREEN_SUR40 is not set
-# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
-# CONFIG_TOUCHSCREEN_SX8654 is not set
-# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TPS6507X is not set
-# CONFIG_TOUCHSCREEN_TS4800 is not set
-# CONFIG_TOUCHSCREEN_TSC2004 is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
-# CONFIG_TOUCHSCREEN_TSC200X_CORE is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_3M is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
-# CONFIG_TOUCHSCREEN_USB_E2I is not set
-# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
-# CONFIG_TOUCHSCREEN_USB_ELO is not set
-# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
-# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
-# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
-# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
-# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
-# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_ITM is not set
-# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
-# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
-# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
-# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
-# CONFIG_TOUCHSCREEN_WM831X is not set
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-# CONFIG_TOUCHSCREEN_WM9712 is not set
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE is not set
-# CONFIG_TOUCHSCREEN_ZET6223 is not set
-# CONFIG_TOUCHSCREEN_ZFORCE is not set
-# CONFIG_TOUCHSCREEN_ZINITIX is not set
-# CONFIG_TPL0102 is not set
-# CONFIG_TPS6105X is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_TRACEPOINT_BENCHMARK is not set
-# CONFIG_TRACER_SNAPSHOT is not set
-# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_TRACE_EVAL_MAP_FILE is not set
-# CONFIG_TRACE_EVENT_INJECT is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_TRACE_SINK is not set
-# CONFIG_TRACING_EVENTS_GPIO is not set
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_TRIM_UNUSED_KSYMS is not set
-# CONFIG_TRUSTED_FOUNDATIONS is not set
-# CONFIG_TRUSTED_KEYS is not set
-# CONFIG_TSL2583 is not set
-# CONFIG_TSL2772 is not set
-# CONFIG_TSL2x7x is not set
-# CONFIG_TSL4531 is not set
-# CONFIG_TSYS01 is not set
-# CONFIG_TSYS02D is not set
-# CONFIG_TTPCI_EEPROM is not set
-CONFIG_TTY=y
-# CONFIG_TTY_PRINTK is not set
-# CONFIG_TUN is not set
-# CONFIG_TUN_VNET_CROSS_LE is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL6030_GPADC is not set
-# CONFIG_TWL6040_CORE is not set
-# CONFIG_TYPEC is not set
-# CONFIG_TYPEC_TCPM is not set
-# CONFIG_TYPEC_UCSI is not set
-# CONFIG_TYPHOON is not set
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_UBIFS_ATIME_SUPPORT is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-# CONFIG_UBIFS_FS_AUTHENTICATION is not set
-# CONFIG_UBIFS_FS_ENCRYPTION is not set
-CONFIG_UBIFS_FS_LZO=y
-# CONFIG_UBIFS_FS_SECURITY is not set
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UBIFS_FS_ZSTD=y
-# CONFIG_UBSAN is not set
-CONFIG_UBSAN_ALIGNMENT=y
-# CONFIG_UBSAN_MISC is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_UCSI is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDMABUF is not set
-CONFIG_UEVENT_HELPER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_UFS_FS is not set
-# CONFIG_UHID is not set
-CONFIG_UID16=y
-# CONFIG_UIO is not set
-# CONFIG_ULTRA is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_UNICODE is not set
-# CONFIG_UNISYSSPAR is not set
-# CONFIG_UNISYS_VISORBUS is not set
-CONFIG_UNIX=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_UNIX_DIAG is not set
-CONFIG_UNIX_SCM=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_UNWINDER_FRAME_POINTER is not set
-# CONFIG_UPROBES is not set
-# CONFIG_UPROBE_EVENTS is not set
-# CONFIG_US5182D is not set
-# CONFIG_USB is not set
-# CONFIG_USB4 is not set
-# CONFIG_USBIP_CORE is not set
-CONFIG_USBIP_VHCI_HC_PORTS=8
-CONFIG_USBIP_VHCI_NR_HCS=1
-# CONFIG_USBIP_VUDC is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AIRSPY is not set
-CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AMD5536UDC is not set
-CONFIG_USB_AN2720=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_ATM is not set
-CONFIG_USB_AUTOSUSPEND_DELAY=2
-# CONFIG_USB_BDC_UDC is not set
-CONFIG_USB_BELKIN=y
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_CDNS3 is not set
-# CONFIG_USB_CHAOSKEY is not set
-# CONFIG_USB_CHIPIDEA is not set
-# CONFIG_USB_CHIPIDEA_GENERIC is not set
-# CONFIG_USB_CHIPIDEA_IMX is not set
-# CONFIG_USB_CHIPIDEA_MSM is not set
-# CONFIG_USB_CHIPIDEA_PCI is not set
-# CONFIG_USB_CHIPIDEA_TEGRA is not set
-# CONFIG_USB_CONFIGFS is not set
-# CONFIG_USB_CONN_GPIO is not set
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-CONFIG_USB_DEFAULT_PERSIST=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DUMMY_HCD is not set
-# CONFIG_USB_DWC2 is not set
-# CONFIG_USB_DWC2_DEBUG is not set
-# CONFIG_USB_DWC2_DUAL_ROLE is not set
-# CONFIG_USB_DWC2_HOST is not set
-# CONFIG_USB_DWC2_PERIPHERAL is not set
-# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
-# CONFIG_USB_DWC3 is not set
-# CONFIG_USB_DWC3_EXYNOS is not set
-# CONFIG_USB_DWC3_HAPS is not set
-# CONFIG_USB_DWC3_KEYSTONE is not set
-# CONFIG_USB_DWC3_OF_SIMPLE is not set
-# CONFIG_USB_DWC3_PCI is not set
-# CONFIG_USB_DWC3_QCOM is not set
-# CONFIG_USB_DWC3_ULPI is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_EHCI_ATH79 is not set
-# CONFIG_USB_EHCI_FSL is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD_AT91 is not set
-# CONFIG_USB_EHCI_HCD_OMAP is not set
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_EHCI_MSM is not set
-# CONFIG_USB_EHCI_MV is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHSET_TEST_FIXTURE is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_EZUSB_FX2 is not set
-# CONFIG_USB_FEW_INIT_RETRIES is not set
-# CONFIG_USB_FOTG210_HCD is not set
-# CONFIG_USB_FOTG210_UDC is not set
-# CONFIG_USB_FSL_USB2 is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_USB_GADGET_VBUS_DRAW=2
-# CONFIG_USB_GADGET_XILINX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_GR_UDC is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_USB_GSPCA_BENQ is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_CPIA1 is not set
-# CONFIG_USB_GSPCA_DTCS033 is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_JL2005BCD is not set
-# CONFIG_USB_GSPCA_KINECT is not set
-# CONFIG_USB_GSPCA_KONICA is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_NW80X is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_OV534_9 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SE401 is not set
-# CONFIG_USB_GSPCA_SN9C2028 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA1528 is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_SQ930X is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STK1135 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TOPRO is not set
-# CONFIG_USB_GSPCA_TOUPTEK is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_VICAM is not set
-# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_USB_G_ACM_MS is not set
-# CONFIG_USB_G_DBGP is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_NCM is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_G_WEBCAM is not set
-# CONFIG_USB_HACKRF is not set
-# CONFIG_USB_HCD_TEST_MODE is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_HSIC_USB3503 is not set
-# CONFIG_USB_HSIC_USB4604 is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_HUB_USB251XB is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_IMX21_HCD is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1301 is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_ISP1760 is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_KC2190 is not set
-# CONFIG_USB_LAN78XX is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
-# CONFIG_USB_LED_TRIG is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LGM_PHY is not set
-# CONFIG_USB_LINK_LAYER_TEST is not set
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_MAX3420_UDC is not set
-# CONFIG_USB_MAX3421_HCD is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_MSI2500 is not set
-# CONFIG_USB_MSM_OTG is not set
-# CONFIG_USB_MTU3 is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_MV_U3D is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_MXS_PHY is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_NET_AQC111 is not set
-# CONFIG_USB_NET_AX88179_178A is not set
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_CDCETHER is not set
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_CDC_MBIM is not set
-# CONFIG_USB_NET_CDC_NCM is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_CH9200 is not set
-# CONFIG_USB_NET_CX82310_ETH is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_DRIVERS is not set
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_NET_KALMIA is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_QMI_WWAN is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_SR9700 is not set
-# CONFIG_USB_NET_SR9800 is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD_PCI is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_SSB is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
-# CONFIG_USB_OTG_FSM is not set
-# CONFIG_USB_OTG_PRODUCTLIST is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_PCI is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_PHY is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_PXA27X is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_RAW_GADGET is not set
-# CONFIG_USB_RCAR_PHY is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_ROLES_INTEL_XHCI is not set
-# CONFIG_USB_ROLE_SWITCH is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_RTL8152 is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_F81232 is not set
-# CONFIG_USB_SERIAL_F8153X is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_METRO is not set
-# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MXUPORT is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QT2 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SIMPLE is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_SSU100 is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_UPD78F0730 is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_WISHBONE is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_XSENS_MT is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_SNP_UDC_PLAT is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_ENE_UB6250 is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_REALTEK is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_SWITCH_FSA9480 is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_TMC is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_UAS is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_USB_ULPI_BUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_VL600 is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-# CONFIG_USB_XHCI_DBGCAP is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_XHCI_MVEBU is not set
-# CONFIG_USB_XHCI_PCI_RENESAS is not set
-# CONFIG_USB_XUSBATM is not set
-# CONFIG_USB_YUREX is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USELIB is not set
-# CONFIG_USERFAULTFD is not set
-# CONFIG_USERIO is not set
-# CONFIG_USE_OF is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_UWB is not set
-# CONFIG_U_SERIAL_CONSOLE is not set
-# CONFIG_V4L_MEM2MEM_DRIVERS is not set
-# CONFIG_V4L_PLATFORM_DRIVERS is not set
-# CONFIG_V4L_TEST_DRIVERS is not set
-# CONFIG_VALIDATE_FS_PARSER is not set
-# CONFIG_VBOXGUEST is not set
-# CONFIG_VCNL3020 is not set
-# CONFIG_VCNL4000 is not set
-# CONFIG_VCNL4035 is not set
-# CONFIG_VDPA is not set
-CONFIG_VDSO=y
-# CONFIG_VEML6030 is not set
-# CONFIG_VEML6070 is not set
-# CONFIG_VETH is not set
-# CONFIG_VEXPRESS_CONFIG is not set
-# CONFIG_VF610_ADC is not set
-# CONFIG_VF610_DAC is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_VFIO is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_VGA_SWITCHEROO is not set
-# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
-CONFIG_VHOST_MENU=y
-# CONFIG_VHOST_NET is not set
-# CONFIG_VHOST_VSOCK is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_VIDEO_AD5820 is not set
-# CONFIG_VIDEO_AD9389B is not set
-# CONFIG_VIDEO_ADP1653 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_ADV7183 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-# CONFIG_VIDEO_ADV7393 is not set
-# CONFIG_VIDEO_ADV748X is not set
-# CONFIG_VIDEO_ADV7511 is not set
-# CONFIG_VIDEO_ADV7604 is not set
-# CONFIG_VIDEO_ADV7842 is not set
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_AK7375 is not set
-# CONFIG_VIDEO_AK881X is not set
-# CONFIG_VIDEO_AM437X_VPFE is not set
-# CONFIG_VIDEO_ASPEED is not set
-# CONFIG_VIDEO_ATMEL_ISC is not set
-# CONFIG_VIDEO_ATMEL_ISI is not set
-# CONFIG_VIDEO_AU0828 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_CADENCE is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-# CONFIG_VIDEO_CS3308 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_CX2341X is not set
-# CONFIG_VIDEO_CX25840 is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_DM6446_CCDC is not set
-# CONFIG_VIDEO_DT3155 is not set
-# CONFIG_VIDEO_DW9714 is not set
-# CONFIG_VIDEO_DW9768 is not set
-# CONFIG_VIDEO_DW9807_VCM is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_ET8EK8 is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_GO7007 is not set
-# CONFIG_VIDEO_GS1662 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HI556 is not set
-# CONFIG_VIDEO_I2C is not set
-# CONFIG_VIDEO_IMX214 is not set
-# CONFIG_VIDEO_IMX219 is not set
-# CONFIG_VIDEO_IMX258 is not set
-# CONFIG_VIDEO_IMX274 is not set
-# CONFIG_VIDEO_IMX290 is not set
-# CONFIG_VIDEO_IMX319 is not set
-# CONFIG_VIDEO_IMX355 is not set
-# CONFIG_VIDEO_IMX477 is not set
-# CONFIG_VIDEO_IRS1125 is not set
-# CONFIG_VIDEO_IR_I2C is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_LM3560 is not set
-# CONFIG_VIDEO_LM3646 is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_M5MOLS is not set
-# CONFIG_VIDEO_MAX9286 is not set
-# CONFIG_VIDEO_ML86V7667 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_MT9M001 is not set
-# CONFIG_VIDEO_MT9M032 is not set
-# CONFIG_VIDEO_MT9M111 is not set
-# CONFIG_VIDEO_MT9P031 is not set
-# CONFIG_VIDEO_MT9T001 is not set
-# CONFIG_VIDEO_MT9T112 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_MT9V032 is not set
-# CONFIG_VIDEO_MT9V111 is not set
-# CONFIG_VIDEO_MUX is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_NOON010PC30 is not set
-# CONFIG_VIDEO_OMAP2_VOUT is not set
-# CONFIG_VIDEO_OV13858 is not set
-# CONFIG_VIDEO_OV2640 is not set
-# CONFIG_VIDEO_OV2659 is not set
-# CONFIG_VIDEO_OV2680 is not set
-# CONFIG_VIDEO_OV2685 is not set
-# CONFIG_VIDEO_OV2740 is not set
-# CONFIG_VIDEO_OV5640 is not set
-# CONFIG_VIDEO_OV5645 is not set
-# CONFIG_VIDEO_OV5647 is not set
-# CONFIG_VIDEO_OV5670 is not set
-# CONFIG_VIDEO_OV5675 is not set
-# CONFIG_VIDEO_OV5695 is not set
-# CONFIG_VIDEO_OV6650 is not set
-# CONFIG_VIDEO_OV7251 is not set
-# CONFIG_VIDEO_OV7640 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_OV772X is not set
-# CONFIG_VIDEO_OV7740 is not set
-# CONFIG_VIDEO_OV8856 is not set
-# CONFIG_VIDEO_OV9281 is not set
-# CONFIG_VIDEO_OV9640 is not set
-# CONFIG_VIDEO_OV9650 is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_RDACM20 is not set
-# CONFIG_VIDEO_RJ54N1 is not set
-# CONFIG_VIDEO_S5C73M3 is not set
-# CONFIG_VIDEO_S5K4ECGX is not set
-# CONFIG_VIDEO_S5K5BAF is not set
-# CONFIG_VIDEO_S5K6A3 is not set
-# CONFIG_VIDEO_S5K6AA is not set
-# CONFIG_VIDEO_SAA6588 is not set
-# CONFIG_VIDEO_SAA6752HS is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_VIDEO_SMIAPP is not set
-# CONFIG_VIDEO_SONY_BTF_MPX is not set
-# CONFIG_VIDEO_SR030PC30 is not set
-# CONFIG_VIDEO_STK1160_COMMON is not set
-# CONFIG_VIDEO_ST_MIPID02 is not set
-# CONFIG_VIDEO_TC358743 is not set
-# CONFIG_VIDEO_TDA1997X is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_THS8200 is not set
-# CONFIG_VIDEO_TIMBERDALE is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_TM6000 is not set
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_TW2804 is not set
-# CONFIG_VIDEO_TW9903 is not set
-# CONFIG_VIDEO_TW9906 is not set
-# CONFIG_VIDEO_TW9910 is not set
-# CONFIG_VIDEO_UDA1342 is not set
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_USBTV is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-# CONFIG_VIDEO_VPX3220 is not set
-# CONFIG_VIDEO_VS6624 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_XILINX is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIRTIO_BALLOON is not set
-# CONFIG_VIRTIO_BLK_SCSI is not set
-# CONFIG_VIRTIO_CONSOLE is not set
-# CONFIG_VIRTIO_FS is not set
-# CONFIG_VIRTIO_INPUT is not set
-# CONFIG_VIRTIO_IOMMU is not set
-CONFIG_VIRTIO_MENU=y
-# CONFIG_VIRTIO_MMIO is not set
-# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
-# CONFIG_VIRT_DRIVERS is not set
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_VL53L0X_I2C is not set
-# CONFIG_VL6180 is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_VLAN_8021Q_MVRP is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_VMSPLIT_1G is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMWARE_PVSCSI is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_VOP_BUS is not set
-# CONFIG_VORTEX is not set
-# CONFIG_VSOCKETS is not set
-# CONFIG_VSOCKETS_DIAG is not set
-# CONFIG_VT is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_VXGE is not set
-# CONFIG_VXLAN is not set
-# CONFIG_VZ89X is not set
-# CONFIG_W1 is not set
-# CONFIG_W1_CON is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_MASTER_SGI is not set
-# CONFIG_W1_SLAVE_DS2405 is not set
-# CONFIG_W1_SLAVE_DS2406 is not set
-# CONFIG_W1_SLAVE_DS2408 is not set
-# CONFIG_W1_SLAVE_DS2413 is not set
-# CONFIG_W1_SLAVE_DS2423 is not set
-# CONFIG_W1_SLAVE_DS2430 is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2438 is not set
-# CONFIG_W1_SLAVE_DS250X is not set
-# CONFIG_W1_SLAVE_DS2780 is not set
-# CONFIG_W1_SLAVE_DS2781 is not set
-# CONFIG_W1_SLAVE_DS2805 is not set
-# CONFIG_W1_SLAVE_DS28E04 is not set
-# CONFIG_W1_SLAVE_DS28E17 is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_WAN is not set
-# CONFIG_WANXL is not set
-# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_CORE is not set
-CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-CONFIG_WATCHDOG_OPEN_TIMEOUT=0
-# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
-# CONFIG_WATCHDOG_SYSFS is not set
-# CONFIG_WATCH_QUEUE is not set
-# CONFIG_WD80x3 is not set
-# CONFIG_WDAT_WDT is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_WEXT_CORE is not set
-# CONFIG_WEXT_PRIV is not set
-# CONFIG_WEXT_PROC is not set
-# CONFIG_WEXT_SPY is not set
-CONFIG_WILINK_PLATFORM_DATA=y
-# CONFIG_WIMAX is not set
-# CONFIG_WIREGUARD is not set
-CONFIG_WIRELESS=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_WIRELESS_WDS is not set
-# CONFIG_WIZNET_W5100 is not set
-# CONFIG_WIZNET_W5300 is not set
-# CONFIG_WL1251 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_WL18XX is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_VENDOR_ADMTEK is not set
-# CONFIG_WLAN_VENDOR_ATH is not set
-# CONFIG_WLAN_VENDOR_ATMEL is not set
-# CONFIG_WLAN_VENDOR_BROADCOM is not set
-# CONFIG_WLAN_VENDOR_CISCO is not set
-# CONFIG_WLAN_VENDOR_INTEL is not set
-# CONFIG_WLAN_VENDOR_INTERSIL is not set
-# CONFIG_WLAN_VENDOR_MARVELL is not set
-# CONFIG_WLAN_VENDOR_MEDIATEK is not set
-# CONFIG_WLAN_VENDOR_MICROCHIP is not set
-# CONFIG_WLAN_VENDOR_QUANTENNA is not set
-# CONFIG_WLAN_VENDOR_RALINK is not set
-# CONFIG_WLAN_VENDOR_REALTEK is not set
-# CONFIG_WLAN_VENDOR_RSI is not set
-# CONFIG_WLAN_VENDOR_ST is not set
-# CONFIG_WLAN_VENDOR_TI is not set
-# CONFIG_WLAN_VENDOR_ZYDAS is not set
-# CONFIG_WLCORE is not set
-CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
-# CONFIG_WQ_WATCHDOG is not set
-# CONFIG_WW_MUTEX_SELFTEST is not set
-# CONFIG_X25 is not set
-# CONFIG_X509_CERTIFICATE_PARSER is not set
-# CONFIG_X86_PKG_TEMP_THERMAL is not set
-CONFIG_X86_SYSFB=y
-# CONFIG_XDP_SOCKETS is not set
-# CONFIG_XEN is not set
-# CONFIG_XEN_GRANT_DMA_ALLOC is not set
-# CONFIG_XEN_PVCALLS_FRONTEND is not set
-CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_INTERFACE is not set
-# CONFIG_XFRM_IPCOMP is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_ONLINE_SCRUB is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_SUPPORT_V4 is not set
-# CONFIG_XFS_WARN is not set
-# CONFIG_XILINX_AXI_EMAC is not set
-# CONFIG_XILINX_DMA is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_XILINX_GMII2RGMII is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_XILINX_SDFEC is not set
-# CONFIG_XILINX_VCU is not set
-# CONFIG_XILINX_WATCHDOG is not set
-# CONFIG_XILINX_XADC is not set
-# CONFIG_XILINX_ZYNQMP_DMA is not set
-# CONFIG_XILINX_ZYNQMP_DPDMA is not set
-# CONFIG_XILLYBUS is not set
-# CONFIG_XIL_AXIS_FIFO is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_XMON is not set
-CONFIG_XZ_DEC=y
-# CONFIG_XZ_DEC_ARM is not set
-# CONFIG_XZ_DEC_ARMTHUMB is not set
-# CONFIG_XZ_DEC_BCJ is not set
-# CONFIG_XZ_DEC_IA64 is not set
-# CONFIG_XZ_DEC_POWERPC is not set
-# CONFIG_XZ_DEC_SPARC is not set
-# CONFIG_XZ_DEC_TEST is not set
-# CONFIG_XZ_DEC_X86 is not set
-# CONFIG_YAM is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_YENTA is not set
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_ZBUD is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_ZEROPLUS_FF is not set
-# CONFIG_ZIIRAVE_WATCHDOG is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_ZLIB_DEFLATE is not set
-# CONFIG_ZLIB_INFLATE is not set
-CONFIG_ZONE_DMA=y
-# CONFIG_ZOPT2201 is not set
-# CONFIG_ZPA2326 is not set
-# CONFIG_ZPOOL is not set
-# CONFIG_ZRAM is not set
-# CONFIG_ZRAM_MEMORY_TRACKING is not set
-# CONFIG_ZSMALLOC is not set
-# CONFIG_ZX_TDM is not set
diff --git a/target/linux/generic/hack-5.10/100-update-mtk_wed_h.patch b/target/linux/generic/hack-5.10/100-update-mtk_wed_h.patch
deleted file mode 100644
index 5f05179a36a1..000000000000
--- a/target/linux/generic/hack-5.10/100-update-mtk_wed_h.patch
+++ /dev/null
@@ -1,248 +0,0 @@
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -5,21 +5,77 @@
- #include <linux/rcupdate.h>
- #include <linux/regmap.h>
- #include <linux/pci.h>
-+#include <linux/skbuff.h>
-+#include <linux/netdevice.h>
- 
- #define MTK_WED_TX_QUEUES		2
-+#define MTK_WED_RX_QUEUES		2
-+
-+#define WED_WO_STA_REC			0x6
- 
- struct mtk_wed_hw;
- struct mtk_wdma_desc;
- 
-+enum mtk_wed_wo_cmd {
-+	MTK_WED_WO_CMD_WED_CFG,
-+	MTK_WED_WO_CMD_WED_RX_STAT,
-+	MTK_WED_WO_CMD_RRO_SER,
-+	MTK_WED_WO_CMD_DBG_INFO,
-+	MTK_WED_WO_CMD_DEV_INFO,
-+	MTK_WED_WO_CMD_BSS_INFO,
-+	MTK_WED_WO_CMD_STA_REC,
-+	MTK_WED_WO_CMD_DEV_INFO_DUMP,
-+	MTK_WED_WO_CMD_BSS_INFO_DUMP,
-+	MTK_WED_WO_CMD_STA_REC_DUMP,
-+	MTK_WED_WO_CMD_BA_INFO_DUMP,
-+	MTK_WED_WO_CMD_FBCMD_Q_DUMP,
-+	MTK_WED_WO_CMD_FW_LOG_CTRL,
-+	MTK_WED_WO_CMD_LOG_FLUSH,
-+	MTK_WED_WO_CMD_CHANGE_STATE,
-+	MTK_WED_WO_CMD_CPU_STATS_ENABLE,
-+	MTK_WED_WO_CMD_CPU_STATS_DUMP,
-+	MTK_WED_WO_CMD_EXCEPTION_INIT,
-+	MTK_WED_WO_CMD_PROF_CTRL,
-+	MTK_WED_WO_CMD_STA_BA_DUMP,
-+	MTK_WED_WO_CMD_BA_CTRL_DUMP,
-+	MTK_WED_WO_CMD_RXCNT_CTRL,
-+	MTK_WED_WO_CMD_RXCNT_INFO,
-+	MTK_WED_WO_CMD_SET_CAP,
-+	MTK_WED_WO_CMD_CCIF_RING_DUMP,
-+	MTK_WED_WO_CMD_WED_END
-+};
-+
-+struct mtk_rxbm_desc {
-+	__le32 buf0;
-+	__le32 token;
-+} __packed __aligned(4);
-+
-+enum mtk_wed_bus_tye {
-+	MTK_WED_BUS_PCIE,
-+	MTK_WED_BUS_AXI,
-+};
-+
-+#define MTK_WED_RING_CONFIGURED		BIT(0)
- struct mtk_wed_ring {
- 	struct mtk_wdma_desc *desc;
- 	dma_addr_t desc_phys;
-+	u32 desc_size;
- 	int size;
-+	u32 flags;
- 
- 	u32 reg_base;
- 	void __iomem *wpdma;
- };
- 
-+struct mtk_wed_wo_rx_stats {
-+	__le16 wlan_idx;
-+	__le16 tid;
-+	__le32 rx_pkt_cnt;
-+	__le32 rx_byte_cnt;
-+	__le32 rx_err_cnt;
-+	__le32 rx_drop_cnt;
-+};
-+
- struct mtk_wed_device {
- #ifdef CONFIG_NET_MEDIATEK_SOC_WED
- 	const struct mtk_wed_ops *ops;
-@@ -28,30 +84,76 @@ struct mtk_wed_device {
- 	bool init_done, running;
- 	int wdma_idx;
- 	int irq;
-+	u8 version;
-+
-+	/* used by wlan driver */
-+	u32 rev_id;
- 
- 	struct mtk_wed_ring tx_ring[MTK_WED_TX_QUEUES];
-+	struct mtk_wed_ring rx_ring[MTK_WED_RX_QUEUES];
- 	struct mtk_wed_ring txfree_ring;
- 	struct mtk_wed_ring tx_wdma[MTK_WED_TX_QUEUES];
-+	struct mtk_wed_ring rx_wdma[MTK_WED_RX_QUEUES];
- 
- 	struct {
- 		int size;
- 		void **pages;
- 		struct mtk_wdma_desc *desc;
- 		dma_addr_t desc_phys;
--	} buf_ring;
-+	} tx_buf_ring;
-+
-+	struct {
-+		int size;
-+		struct page_frag_cache rx_page;
-+		struct mtk_rxbm_desc *desc;
-+		dma_addr_t desc_phys;
-+	} rx_buf_ring;
-+
-+	struct {
-+		struct mtk_wed_ring ring;
-+		dma_addr_t miod_phys;
-+		dma_addr_t fdbk_phys;
-+	} rro;
- 
- 	/* filled by driver: */
- 	struct {
--		struct pci_dev *pci_dev;
-+		union {
-+			struct platform_device *platform_dev;
-+			struct pci_dev *pci_dev;
-+		};
-+		enum mtk_wed_bus_tye bus_type;
-+		void __iomem *base;
-+		u32 phy_base;
- 
- 		u32 wpdma_phys;
-+		u32 wpdma_int;
-+		u32 wpdma_mask;
-+		u32 wpdma_tx;
-+		u32 wpdma_txfree;
-+		u32 wpdma_rx_glo;
-+		u32 wpdma_rx;
-+
-+		bool wcid_512;
- 
- 		u16 token_start;
- 		unsigned int nbuf;
-+		unsigned int rx_nbuf;
-+		unsigned int rx_npkt;
-+		unsigned int rx_size;
-+
-+		u8 tx_tbit[MTK_WED_TX_QUEUES];
-+		u8 rx_tbit[MTK_WED_RX_QUEUES];
-+		u8 txfree_tbit;
- 
- 		u32 (*init_buf)(void *ptr, dma_addr_t phys, int token_id);
- 		int (*offload_enable)(struct mtk_wed_device *wed);
- 		void (*offload_disable)(struct mtk_wed_device *wed);
-+		u32 (*init_rx_buf)(struct mtk_wed_device *wed, int size);
-+		void (*release_rx_buf)(struct mtk_wed_device *wed);
-+		void (*update_wo_rx_stats)(struct mtk_wed_device *wed,
-+					   struct mtk_wed_wo_rx_stats *stats);
-+		int (*reset)(struct mtk_wed_device *wed);
-+		void (*reset_complete)(struct mtk_wed_device *wed);
- 	} wlan;
- #endif
- };
-@@ -59,10 +161,16 @@ struct mtk_wed_device {
- struct mtk_wed_ops {
- 	int (*attach)(struct mtk_wed_device *dev);
- 	int (*tx_ring_setup)(struct mtk_wed_device *dev, int ring,
--			     void __iomem *regs);
-+			     void __iomem *regs, bool reset);
-+	int (*rx_ring_setup)(struct mtk_wed_device *dev, int ring,
-+			     void __iomem *regs, bool reset);
- 	int (*txfree_ring_setup)(struct mtk_wed_device *dev,
- 				 void __iomem *regs);
-+	int (*msg_update)(struct mtk_wed_device *dev, int cmd_id,
-+			  void *data, int len);
- 	void (*detach)(struct mtk_wed_device *dev);
-+	void (*ppe_check)(struct mtk_wed_device *dev, struct sk_buff *skb,
-+			  u32 reason, u32 hash);
- 
- 	void (*stop)(struct mtk_wed_device *dev);
- 	void (*start)(struct mtk_wed_device *dev, u32 irq_mask);
-@@ -73,6 +181,8 @@ struct mtk_wed_ops {
- 
- 	u32 (*irq_get)(struct mtk_wed_device *dev, u32 mask);
- 	void (*irq_set_mask)(struct mtk_wed_device *dev, u32 mask);
-+	int (*setup_tc)(struct mtk_wed_device *wed, struct net_device *dev,
-+			enum tc_setup_type type, void *type_data);
- };
- 
- extern const struct mtk_wed_ops __rcu *mtk_soc_wed_ops;
-@@ -97,12 +207,22 @@ mtk_wed_device_attach(struct mtk_wed_dev
- 	return ret;
- }
- 
-+static inline bool
-+mtk_wed_get_rx_capa(struct mtk_wed_device *dev)
-+{
-+#ifdef CONFIG_NET_MEDIATEK_SOC_WED
-+	return dev->version != 1;
-+#else
-+	return false;
-+#endif
-+}
-+
- #ifdef CONFIG_NET_MEDIATEK_SOC_WED
- #define mtk_wed_device_active(_dev) !!(_dev)->ops
- #define mtk_wed_device_detach(_dev) (_dev)->ops->detach(_dev)
- #define mtk_wed_device_start(_dev, _mask) (_dev)->ops->start(_dev, _mask)
--#define mtk_wed_device_tx_ring_setup(_dev, _ring, _regs) \
--	(_dev)->ops->tx_ring_setup(_dev, _ring, _regs)
-+#define mtk_wed_device_tx_ring_setup(_dev, _ring, _regs, _reset) \
-+	(_dev)->ops->tx_ring_setup(_dev, _ring, _regs, _reset)
- #define mtk_wed_device_txfree_ring_setup(_dev, _regs) \
- 	(_dev)->ops->txfree_ring_setup(_dev, _regs)
- #define mtk_wed_device_reg_read(_dev, _reg) \
-@@ -113,6 +233,16 @@ mtk_wed_device_attach(struct mtk_wed_dev
- 	(_dev)->ops->irq_get(_dev, _mask)
- #define mtk_wed_device_irq_set_mask(_dev, _mask) \
- 	(_dev)->ops->irq_set_mask(_dev, _mask)
-+#define mtk_wed_device_rx_ring_setup(_dev, _ring, _regs, _reset) \
-+	(_dev)->ops->rx_ring_setup(_dev, _ring, _regs, _reset)
-+#define mtk_wed_device_ppe_check(_dev, _skb, _reason, _hash) \
-+	(_dev)->ops->ppe_check(_dev, _skb, _reason, _hash)
-+#define mtk_wed_device_update_msg(_dev, _id, _msg, _len) \
-+	(_dev)->ops->msg_update(_dev, _id, _msg, _len)
-+#define mtk_wed_device_stop(_dev) (_dev)->ops->stop(_dev)
-+#define mtk_wed_device_dma_reset(_dev) (_dev)->ops->reset_dma(_dev)
-+#define mtk_wed_device_setup_tc(_dev, _netdev, _type, _type_data) \
-+	(_dev)->ops->setup_tc(_dev, _netdev, _type, _type_data)
- #else
- static inline bool mtk_wed_device_active(struct mtk_wed_device *dev)
- {
-@@ -120,12 +250,18 @@ static inline bool mtk_wed_device_active
- }
- #define mtk_wed_device_detach(_dev) do {} while (0)
- #define mtk_wed_device_start(_dev, _mask) do {} while (0)
--#define mtk_wed_device_tx_ring_setup(_dev, _ring, _regs) -ENODEV
-+#define mtk_wed_device_tx_ring_setup(_dev, _ring, _regs, _reset) -ENODEV
- #define mtk_wed_device_txfree_ring_setup(_dev, _ring, _regs) -ENODEV
- #define mtk_wed_device_reg_read(_dev, _reg) 0
- #define mtk_wed_device_reg_write(_dev, _reg, _val) do {} while (0)
- #define mtk_wed_device_irq_get(_dev, _mask) 0
- #define mtk_wed_device_irq_set_mask(_dev, _mask) do {} while (0)
-+#define mtk_wed_device_rx_ring_setup(_dev, _ring, _regs, _reset) -ENODEV
-+#define mtk_wed_device_ppe_check(_dev, _skb, _reason, _hash)  do {} while (0)
-+#define mtk_wed_device_update_msg(_dev, _id, _msg, _len) -ENODEV
-+#define mtk_wed_device_stop(_dev) do {} while (0)
-+#define mtk_wed_device_dma_reset(_dev) do {} while (0)
-+#define mtk_wed_device_setup_tc(_dev, _netdev, _type, _type_data) -EOPNOTSUPP
- #endif
- 
- #endif
diff --git a/target/linux/generic/hack-5.10/204-module_strip.patch b/target/linux/generic/hack-5.10/204-module_strip.patch
deleted file mode 100644
index 1dc3eb2752f4..000000000000
--- a/target/linux/generic/hack-5.10/204-module_strip.patch
+++ /dev/null
@@ -1,212 +0,0 @@
-From a779a482fb9b9f8fcdf8b2519c789b4b9bb5dd05 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 16:56:48 +0200
-Subject: build: add a hack for removing non-essential module info
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/module.h      | 13 ++++++++-----
- include/linux/moduleparam.h | 15 ++++++++++++---
- init/Kconfig                |  7 +++++++
- kernel/module.c             |  5 ++++-
- scripts/mod/modpost.c       | 12 ++++++++++++
- 5 files changed, 43 insertions(+), 9 deletions(-)
-
---- a/include/linux/module.h
-+++ b/include/linux/module.h
-@@ -161,6 +161,7 @@ extern void cleanup_module(void);
- 
- /* Generic info of form tag = "info" */
- #define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
-+#define MODULE_INFO_STRIP(tag, info) __MODULE_INFO_STRIP(tag, tag, info)
- 
- /* For userspace: you can also call me... */
- #define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias)
-@@ -230,12 +231,12 @@ extern void cleanup_module(void);
-  * Author(s), use "Name <email>" or just "Name", for multiple
-  * authors use multiple MODULE_AUTHOR() statements/lines.
-  */
--#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
-+#define MODULE_AUTHOR(_author) MODULE_INFO_STRIP(author, _author)
- 
- /* What your module does. */
--#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
-+#define MODULE_DESCRIPTION(_description) MODULE_INFO_STRIP(description, _description)
- 
--#ifdef MODULE
-+#if defined(MODULE) && !defined(CONFIG_MODULE_STRIPPED)
- /* Creates an alias so file2alias.c can find device table. */
- #define MODULE_DEVICE_TABLE(type, name)					\
- extern typeof(name) __mod_##type##__##name##_device_table		\
-@@ -262,7 +263,9 @@ extern typeof(name) __mod_##type##__##na
-  */
- 
- #if defined(MODULE) || !defined(CONFIG_SYSFS)
--#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
-+#define MODULE_VERSION(_version) MODULE_INFO_STRIP(version, _version)
-+#elif defined(CONFIG_MODULE_STRIPPED)
-+#define MODULE_VERSION(_version) __MODULE_INFO_DISABLED(version)
- #else
- #define MODULE_VERSION(_version)					\
- 	MODULE_INFO(version, _version);					\
-@@ -285,7 +288,7 @@ extern typeof(name) __mod_##type##__##na
- /* Optional firmware file (or files) needed by the module
-  * format is simply firmware file name.  Multiple firmware
-  * files require multiple MODULE_FIRMWARE() specifiers */
--#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
-+#define MODULE_FIRMWARE(_firmware) MODULE_INFO_STRIP(firmware, _firmware)
- 
- #define MODULE_IMPORT_NS(ns) MODULE_INFO(import_ns, #ns)
- 
---- a/include/linux/moduleparam.h
-+++ b/include/linux/moduleparam.h
-@@ -20,6 +20,16 @@
- /* Chosen so that structs with an unsigned long line up. */
- #define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
- 
-+/* This struct is here for syntactic coherency, it is not used */
-+#define __MODULE_INFO_DISABLED(name)					  \
-+  struct __UNIQUE_ID(name) {}
-+
-+#ifdef CONFIG_MODULE_STRIPPED
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO_DISABLED(name)
-+#else
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO(tag, name, info)
-+#endif
-+
- #define __MODULE_INFO(tag, name, info)					  \
- static const char __UNIQUE_ID(name)[]					  \
-   __used __section(".modinfo") __attribute__((unused, aligned(1)))	  \
-@@ -31,7 +41,7 @@ static const char __UNIQUE_ID(name)[]
- /* One for each parameter, describing how to use it.  Some files do
-    multiple of these per line, so can't just use MODULE_INFO. */
- #define MODULE_PARM_DESC(_parm, desc) \
--	__MODULE_INFO(parm, _parm, #_parm ":" desc)
-+	__MODULE_INFO_STRIP(parm, _parm, #_parm ":" desc)
- 
- struct kernel_param;
- 
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -2364,6 +2364,13 @@ config UNUSED_KSYMS_WHITELIST
- 	  one per line. The path can be absolute, or relative to the kernel
- 	  source tree.
- 
-+config MODULE_STRIPPED
-+	bool "Reduce module size"
-+	depends on MODULES
-+	help
-+	  Remove module parameter descriptions, author info, version, aliases,
-+	  device tables, etc.
-+
- endif # MODULES
- 
- config MODULES_TREE_LOOKUP
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -1285,6 +1285,7 @@ static struct module_attribute *modinfo_
- 
- static const char vermagic[] = VERMAGIC_STRING;
- 
-+#if defined(CONFIG_MODVERSIONS) || !defined(CONFIG_MODULE_STRIPPED)
- static int try_to_force_load(struct module *mod, const char *reason)
- {
- #ifdef CONFIG_MODULE_FORCE_LOAD
-@@ -1296,6 +1297,7 @@ static int try_to_force_load(struct modu
- 	return -ENOEXEC;
- #endif
- }
-+#endif
- 
- #ifdef CONFIG_MODVERSIONS
- 
-@@ -3251,9 +3253,11 @@ static int setup_load_info(struct load_i
- 
- static int check_modinfo(struct module *mod, struct load_info *info, int flags)
- {
--	const char *modmagic = get_modinfo(info, "vermagic");
- 	int err;
- 
-+#ifndef CONFIG_MODULE_STRIPPED
-+	const char *modmagic = get_modinfo(info, "vermagic");
-+
- 	if (flags & MODULE_INIT_IGNORE_VERMAGIC)
- 		modmagic = NULL;
- 
-@@ -3274,6 +3278,7 @@ static int check_modinfo(struct module *
- 				mod->name);
- 		add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
- 	}
-+#endif
- 
- 	check_modinfo_retpoline(mod, info);
- 
---- a/scripts/mod/modpost.c
-+++ b/scripts/mod/modpost.c
-@@ -2040,7 +2040,9 @@ static void read_symbols(const char *mod
- 		symname = remove_dot(info.strtab + sym->st_name);
- 
- 		handle_symbol(mod, &info, sym, symname);
-+#ifndef CONFIG_MODULE_STRIPPED
- 		handle_moddevtable(mod, &info, sym, symname);
-+#endif
- 	}
- 
- 	for (sym = info.symtab_start; sym < info.symtab_stop; sym++) {
-@@ -2253,8 +2255,10 @@ static void add_header(struct buffer *b,
- 	buf_printf(b, "\n");
- 	buf_printf(b, "BUILD_SALT;\n");
- 	buf_printf(b, "\n");
-+#ifndef CONFIG_MODULE_STRIPPED
- 	buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n");
- 	buf_printf(b, "MODULE_INFO(name, KBUILD_MODNAME);\n");
-+#endif
- 	buf_printf(b, "\n");
- 	buf_printf(b, "__visible struct module __this_module\n");
- 	buf_printf(b, "__section(\".gnu.linkonce.this_module\") = {\n");
-@@ -2271,8 +2275,10 @@ static void add_header(struct buffer *b,
- 
- static void add_intree_flag(struct buffer *b, int is_intree)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (is_intree)
- 		buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n");
-+#endif
- }
- 
- /* Cannot check for assembler */
-@@ -2285,8 +2291,10 @@ static void add_retpoline(struct buffer
- 
- static void add_staging_flag(struct buffer *b, const char *name)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (strstarts(name, "drivers/staging"))
- 		buf_printf(b, "\nMODULE_INFO(staging, \"Y\");\n");
-+#endif
- }
- 
- /**
-@@ -2370,11 +2378,13 @@ static void add_depends(struct buffer *b
- 
- static void add_srcversion(struct buffer *b, struct module *mod)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (mod->srcversion[0]) {
- 		buf_printf(b, "\n");
- 		buf_printf(b, "MODULE_INFO(srcversion, \"%s\");\n",
- 			   mod->srcversion);
- 	}
-+#endif
- }
- 
- static void write_buf(struct buffer *b, const char *fname)
-@@ -2633,7 +2643,9 @@ int main(int argc, char **argv)
- 		add_staging_flag(&buf, mod->name);
- 		err |= add_versions(&buf, mod);
- 		add_depends(&buf, mod);
-+#ifndef CONFIG_MODULE_STRIPPED
- 		add_moddevtable(&buf, mod);
-+#endif
- 		add_srcversion(&buf, mod);
- 
- 		sprintf(fname, "%s.mod.c", mod->name);
diff --git a/target/linux/generic/hack-5.10/205-kconfig-abort-configuration-on-unset-symbol.patch b/target/linux/generic/hack-5.10/205-kconfig-abort-configuration-on-unset-symbol.patch
deleted file mode 100644
index bd5c54d4b8b7..000000000000
--- a/target/linux/generic/hack-5.10/205-kconfig-abort-configuration-on-unset-symbol.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 310e8e04a05d9eb43fa9dd7f00143300afcaa37a Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Fri, 11 Nov 2022 13:33:44 +0100
-Subject: [PATCH] kconfig: abort configuration on unset symbol
-
-When a target configuration has unset Kconfig symbols, the build will
-fail when OpenWrt is compiled with V=s and stdin is connected to a tty.
-
-In case OpenWrt is compiled without either of these preconditions, the
-build will succeed with the symbols in question being unset.
-
-Modify the kernel configuration in a way it fails on unset symbols
-regardless of the aforementioned preconditions.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- scripts/kconfig/conf.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/scripts/kconfig/conf.c
-+++ b/scripts/kconfig/conf.c
-@@ -109,6 +109,9 @@ static int conf_askvalue(struct symbol *
- 		}
- 		/* fall through */
- 	case oldaskconfig:
-+		if (!tty_stdio && getenv("FAIL_ON_UNCONFIGURED")) {
-+			exit(1);
-+		}
- 		fflush(stdout);
- 		xfgets(line, sizeof(line), stdin);
- 		return 1;
-@@ -303,6 +306,9 @@ static int conf_choice(struct menu *menu
- 			}
- 			/* fall through */
- 		case oldaskconfig:
-+			if (!tty_stdio && getenv("FAIL_ON_UNCONFIGURED")) {
-+				exit(1);
-+			}
- 			fflush(stdout);
- 			xfgets(line, sizeof(line), stdin);
- 			strip(line);
diff --git a/target/linux/generic/hack-5.10/210-darwin_scripts_include.patch b/target/linux/generic/hack-5.10/210-darwin_scripts_include.patch
deleted file mode 100644
index be6adc0d11aa..000000000000
--- a/target/linux/generic/hack-5.10/210-darwin_scripts_include.patch
+++ /dev/null
@@ -1,3053 +0,0 @@
-From db7c30dcd9a0391bf13b62c9f91e144d762ef43a Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri, 7 Jul 2017 17:00:49 +0200
-Subject: Add an OSX specific patch to make the kernel be compiled
-
-lede-commit: 3fc2a24f0422b2f55f9ed43f116db3111f700526
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- scripts/kconfig/Makefile   |    3 +
- scripts/mod/elf.h          | 3007 ++++++++++++++++++++++++++++++++++++++++++++
- scripts/mod/mk_elfconfig.c |    4 +
- scripts/mod/modpost.h      |    4 +
- 4 files changed, 3018 insertions(+)
- create mode 100644 scripts/mod/elf.h
-
---- /dev/null
-+++ b/scripts/mod/elf.h
-@@ -0,0 +1,3007 @@
-+/* This file defines standard ELF types, structures, and macros.
-+   Copyright (C) 1995-2012 Free Software Foundation, Inc.
-+   This file is part of the GNU C Library.
-+
-+   The GNU C Library is free software; you can redistribute it and/or
-+   modify it under the terms of the GNU Lesser General Public
-+   License as published by the Free Software Foundation; either
-+   version 2.1 of the License, or (at your option) any later version.
-+
-+   The GNU C Library is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+   Lesser General Public License for more details.
-+
-+   You should have received a copy of the GNU Lesser General Public
-+   License along with the GNU C Library; if not, see
-+   <http://www.gnu.org/licenses/>.  */
-+
-+#ifndef _ELF_H
-+#define	_ELF_H 1
-+
-+/* Standard ELF types.  */
-+
-+#include <stdint.h>
-+
-+/* Type for a 16-bit quantity.  */
-+typedef uint16_t Elf32_Half;
-+typedef uint16_t Elf64_Half;
-+
-+/* Types for signed and unsigned 32-bit quantities.  */
-+typedef uint32_t Elf32_Word;
-+typedef	int32_t  Elf32_Sword;
-+typedef uint32_t Elf64_Word;
-+typedef	int32_t  Elf64_Sword;
-+
-+/* Types for signed and unsigned 64-bit quantities.  */
-+typedef uint64_t Elf32_Xword;
-+typedef	int64_t  Elf32_Sxword;
-+typedef uint64_t Elf64_Xword;
-+typedef	int64_t  Elf64_Sxword;
-+
-+/* Type of addresses.  */
-+typedef uint32_t Elf32_Addr;
-+typedef uint64_t Elf64_Addr;
-+
-+/* Type of file offsets.  */
-+typedef uint32_t Elf32_Off;
-+typedef uint64_t Elf64_Off;
-+
-+/* Type for section indices, which are 16-bit quantities.  */
-+typedef uint16_t Elf32_Section;
-+typedef uint16_t Elf64_Section;
-+
-+/* Type for version symbol information.  */
-+typedef Elf32_Half Elf32_Versym;
-+typedef Elf64_Half Elf64_Versym;
-+
-+
-+/* The ELF file header.  This appears at the start of every ELF file.  */
-+
-+#define EI_NIDENT (16)
-+
-+typedef struct
-+{
-+  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
-+  Elf32_Half	e_type;			/* Object file type */
-+  Elf32_Half	e_machine;		/* Architecture */
-+  Elf32_Word	e_version;		/* Object file version */
-+  Elf32_Addr	e_entry;		/* Entry point virtual address */
-+  Elf32_Off	e_phoff;		/* Program header table file offset */
-+  Elf32_Off	e_shoff;		/* Section header table file offset */
-+  Elf32_Word	e_flags;		/* Processor-specific flags */
-+  Elf32_Half	e_ehsize;		/* ELF header size in bytes */
-+  Elf32_Half	e_phentsize;		/* Program header table entry size */
-+  Elf32_Half	e_phnum;		/* Program header table entry count */
-+  Elf32_Half	e_shentsize;		/* Section header table entry size */
-+  Elf32_Half	e_shnum;		/* Section header table entry count */
-+  Elf32_Half	e_shstrndx;		/* Section header string table index */
-+} Elf32_Ehdr;
-+
-+typedef struct
-+{
-+  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
-+  Elf64_Half	e_type;			/* Object file type */
-+  Elf64_Half	e_machine;		/* Architecture */
-+  Elf64_Word	e_version;		/* Object file version */
-+  Elf64_Addr	e_entry;		/* Entry point virtual address */
-+  Elf64_Off	e_phoff;		/* Program header table file offset */
-+  Elf64_Off	e_shoff;		/* Section header table file offset */
-+  Elf64_Word	e_flags;		/* Processor-specific flags */
-+  Elf64_Half	e_ehsize;		/* ELF header size in bytes */
-+  Elf64_Half	e_phentsize;		/* Program header table entry size */
-+  Elf64_Half	e_phnum;		/* Program header table entry count */
-+  Elf64_Half	e_shentsize;		/* Section header table entry size */
-+  Elf64_Half	e_shnum;		/* Section header table entry count */
-+  Elf64_Half	e_shstrndx;		/* Section header string table index */
-+} Elf64_Ehdr;
-+
-+/* Fields in the e_ident array.  The EI_* macros are indices into the
-+   array.  The macros under each EI_* macro are the values the byte
-+   may have.  */
-+
-+#define EI_MAG0		0		/* File identification byte 0 index */
-+#define ELFMAG0		0x7f		/* Magic number byte 0 */
-+
-+#define EI_MAG1		1		/* File identification byte 1 index */
-+#define ELFMAG1		'E'		/* Magic number byte 1 */
-+
-+#define EI_MAG2		2		/* File identification byte 2 index */
-+#define ELFMAG2		'L'		/* Magic number byte 2 */
-+
-+#define EI_MAG3		3		/* File identification byte 3 index */
-+#define ELFMAG3		'F'		/* Magic number byte 3 */
-+
-+/* Conglomeration of the identification bytes, for easy testing as a word.  */
-+#define	ELFMAG		"\177ELF"
-+#define	SELFMAG		4
-+
-+#define EI_CLASS	4		/* File class byte index */
-+#define ELFCLASSNONE	0		/* Invalid class */
-+#define ELFCLASS32	1		/* 32-bit objects */
-+#define ELFCLASS64	2		/* 64-bit objects */
-+#define ELFCLASSNUM	3
-+
-+#define EI_DATA		5		/* Data encoding byte index */
-+#define ELFDATANONE	0		/* Invalid data encoding */
-+#define ELFDATA2LSB	1		/* 2's complement, little endian */
-+#define ELFDATA2MSB	2		/* 2's complement, big endian */
-+#define ELFDATANUM	3
-+
-+#define EI_VERSION	6		/* File version byte index */
-+					/* Value must be EV_CURRENT */
-+
-+#define EI_OSABI	7		/* OS ABI identification */
-+#define ELFOSABI_NONE		0	/* UNIX System V ABI */
-+#define ELFOSABI_SYSV		0	/* Alias.  */
-+#define ELFOSABI_HPUX		1	/* HP-UX */
-+#define ELFOSABI_NETBSD		2	/* NetBSD.  */
-+#define ELFOSABI_GNU		3	/* Object uses GNU ELF extensions.  */
-+#define ELFOSABI_LINUX		ELFOSABI_GNU /* Compatibility alias.  */
-+#define ELFOSABI_SOLARIS	6	/* Sun Solaris.  */
-+#define ELFOSABI_AIX		7	/* IBM AIX.  */
-+#define ELFOSABI_IRIX		8	/* SGI Irix.  */
-+#define ELFOSABI_FREEBSD	9	/* FreeBSD.  */
-+#define ELFOSABI_TRU64		10	/* Compaq TRU64 UNIX.  */
-+#define ELFOSABI_MODESTO	11	/* Novell Modesto.  */
-+#define ELFOSABI_OPENBSD	12	/* OpenBSD.  */
-+#define ELFOSABI_ARM_AEABI	64	/* ARM EABI */
-+#define ELFOSABI_ARM		97	/* ARM */
-+#define ELFOSABI_STANDALONE	255	/* Standalone (embedded) application */
-+
-+#define EI_ABIVERSION	8		/* ABI version */
-+
-+#define EI_PAD		9		/* Byte index of padding bytes */
-+
-+/* Legal values for e_type (object file type).  */
-+
-+#define ET_NONE		0		/* No file type */
-+#define ET_REL		1		/* Relocatable file */
-+#define ET_EXEC		2		/* Executable file */
-+#define ET_DYN		3		/* Shared object file */
-+#define ET_CORE		4		/* Core file */
-+#define	ET_NUM		5		/* Number of defined types */
-+#define ET_LOOS		0xfe00		/* OS-specific range start */
-+#define ET_HIOS		0xfeff		/* OS-specific range end */
-+#define ET_LOPROC	0xff00		/* Processor-specific range start */
-+#define ET_HIPROC	0xffff		/* Processor-specific range end */
-+
-+/* Legal values for e_machine (architecture).  */
-+
-+#define EM_NONE		 0		/* No machine */
-+#define EM_M32		 1		/* AT&T WE 32100 */
-+#define EM_SPARC	 2		/* SUN SPARC */
-+#define EM_386		 3		/* Intel 80386 */
-+#define EM_68K		 4		/* Motorola m68k family */
-+#define EM_88K		 5		/* Motorola m88k family */
-+#define EM_860		 7		/* Intel 80860 */
-+#define EM_MIPS		 8		/* MIPS R3000 big-endian */
-+#define EM_S370		 9		/* IBM System/370 */
-+#define EM_MIPS_RS3_LE	10		/* MIPS R3000 little-endian */
-+
-+#define EM_PARISC	15		/* HPPA */
-+#define EM_VPP500	17		/* Fujitsu VPP500 */
-+#define EM_SPARC32PLUS	18		/* Sun's "v8plus" */
-+#define EM_960		19		/* Intel 80960 */
-+#define EM_PPC		20		/* PowerPC */
-+#define EM_PPC64	21		/* PowerPC 64-bit */
-+#define EM_S390		22		/* IBM S390 */
-+
-+#define EM_V800		36		/* NEC V800 series */
-+#define EM_FR20		37		/* Fujitsu FR20 */
-+#define EM_RH32		38		/* TRW RH-32 */
-+#define EM_RCE		39		/* Motorola RCE */
-+#define EM_ARM		40		/* ARM */
-+#define EM_FAKE_ALPHA	41		/* Digital Alpha */
-+#define EM_SH		42		/* Hitachi SH */
-+#define EM_SPARCV9	43		/* SPARC v9 64-bit */
-+#define EM_TRICORE	44		/* Siemens Tricore */
-+#define EM_ARC		45		/* Argonaut RISC Core */
-+#define EM_H8_300	46		/* Hitachi H8/300 */
-+#define EM_H8_300H	47		/* Hitachi H8/300H */
-+#define EM_H8S		48		/* Hitachi H8S */
-+#define EM_H8_500	49		/* Hitachi H8/500 */
-+#define EM_IA_64	50		/* Intel Merced */
-+#define EM_MIPS_X	51		/* Stanford MIPS-X */
-+#define EM_COLDFIRE	52		/* Motorola Coldfire */
-+#define EM_68HC12	53		/* Motorola M68HC12 */
-+#define EM_MMA		54		/* Fujitsu MMA Multimedia Accelerator*/
-+#define EM_PCP		55		/* Siemens PCP */
-+#define EM_NCPU		56		/* Sony nCPU embeeded RISC */
-+#define EM_NDR1		57		/* Denso NDR1 microprocessor */
-+#define EM_STARCORE	58		/* Motorola Start*Core processor */
-+#define EM_ME16		59		/* Toyota ME16 processor */
-+#define EM_ST100	60		/* STMicroelectronic ST100 processor */
-+#define EM_TINYJ	61		/* Advanced Logic Corp. Tinyj emb.fam*/
-+#define EM_X86_64	62		/* AMD x86-64 architecture */
-+#define EM_PDSP		63		/* Sony DSP Processor */
-+
-+#define EM_FX66		66		/* Siemens FX66 microcontroller */
-+#define EM_ST9PLUS	67		/* STMicroelectronics ST9+ 8/16 mc */
-+#define EM_ST7		68		/* STmicroelectronics ST7 8 bit mc */
-+#define EM_68HC16	69		/* Motorola MC68HC16 microcontroller */
-+#define EM_68HC11	70		/* Motorola MC68HC11 microcontroller */
-+#define EM_68HC08	71		/* Motorola MC68HC08 microcontroller */
-+#define EM_68HC05	72		/* Motorola MC68HC05 microcontroller */
-+#define EM_SVX		73		/* Silicon Graphics SVx */
-+#define EM_ST19		74		/* STMicroelectronics ST19 8 bit mc */
-+#define EM_VAX		75		/* Digital VAX */
-+#define EM_CRIS		76		/* Axis Communications 32-bit embedded processor */
-+#define EM_JAVELIN	77		/* Infineon Technologies 32-bit embedded processor */
-+#define EM_FIREPATH	78		/* Element 14 64-bit DSP Processor */
-+#define EM_ZSP		79		/* LSI Logic 16-bit DSP Processor */
-+#define EM_MMIX		80		/* Donald Knuth's educational 64-bit processor */
-+#define EM_HUANY	81		/* Harvard University machine-independent object files */
-+#define EM_PRISM	82		/* SiTera Prism */
-+#define EM_AVR		83		/* Atmel AVR 8-bit microcontroller */
-+#define EM_FR30		84		/* Fujitsu FR30 */
-+#define EM_D10V		85		/* Mitsubishi D10V */
-+#define EM_D30V		86		/* Mitsubishi D30V */
-+#define EM_V850		87		/* NEC v850 */
-+#define EM_M32R		88		/* Mitsubishi M32R */
-+#define EM_MN10300	89		/* Matsushita MN10300 */
-+#define EM_MN10200	90		/* Matsushita MN10200 */
-+#define EM_PJ		91		/* picoJava */
-+#define EM_OPENRISC	92		/* OpenRISC 32-bit embedded processor */
-+#define EM_ARC_A5	93		/* ARC Cores Tangent-A5 */
-+#define EM_XTENSA	94		/* Tensilica Xtensa Architecture */
-+#define EM_TILEPRO	188		/* Tilera TILEPro */
-+#define EM_TILEGX	191		/* Tilera TILE-Gx */
-+#define EM_NUM		192
-+
-+/* If it is necessary to assign new unofficial EM_* values, please
-+   pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the
-+   chances of collision with official or non-GNU unofficial values.  */
-+
-+#define EM_ALPHA	0x9026
-+
-+/* Legal values for e_version (version).  */
-+
-+#define EV_NONE		0		/* Invalid ELF version */
-+#define EV_CURRENT	1		/* Current version */
-+#define EV_NUM		2
-+
-+/* Section header.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	sh_name;		/* Section name (string tbl index) */
-+  Elf32_Word	sh_type;		/* Section type */
-+  Elf32_Word	sh_flags;		/* Section flags */
-+  Elf32_Addr	sh_addr;		/* Section virtual addr at execution */
-+  Elf32_Off	sh_offset;		/* Section file offset */
-+  Elf32_Word	sh_size;		/* Section size in bytes */
-+  Elf32_Word	sh_link;		/* Link to another section */
-+  Elf32_Word	sh_info;		/* Additional section information */
-+  Elf32_Word	sh_addralign;		/* Section alignment */
-+  Elf32_Word	sh_entsize;		/* Entry size if section holds table */
-+} Elf32_Shdr;
-+
-+typedef struct
-+{
-+  Elf64_Word	sh_name;		/* Section name (string tbl index) */
-+  Elf64_Word	sh_type;		/* Section type */
-+  Elf64_Xword	sh_flags;		/* Section flags */
-+  Elf64_Addr	sh_addr;		/* Section virtual addr at execution */
-+  Elf64_Off	sh_offset;		/* Section file offset */
-+  Elf64_Xword	sh_size;		/* Section size in bytes */
-+  Elf64_Word	sh_link;		/* Link to another section */
-+  Elf64_Word	sh_info;		/* Additional section information */
-+  Elf64_Xword	sh_addralign;		/* Section alignment */
-+  Elf64_Xword	sh_entsize;		/* Entry size if section holds table */
-+} Elf64_Shdr;
-+
-+/* Special section indices.  */
-+
-+#define SHN_UNDEF	0		/* Undefined section */
-+#define SHN_LORESERVE	0xff00		/* Start of reserved indices */
-+#define SHN_LOPROC	0xff00		/* Start of processor-specific */
-+#define SHN_BEFORE	0xff00		/* Order section before all others
-+					   (Solaris).  */
-+#define SHN_AFTER	0xff01		/* Order section after all others
-+					   (Solaris).  */
-+#define SHN_HIPROC	0xff1f		/* End of processor-specific */
-+#define SHN_LOOS	0xff20		/* Start of OS-specific */
-+#define SHN_HIOS	0xff3f		/* End of OS-specific */
-+#define SHN_ABS		0xfff1		/* Associated symbol is absolute */
-+#define SHN_COMMON	0xfff2		/* Associated symbol is common */
-+#define SHN_XINDEX	0xffff		/* Index is in extra table.  */
-+#define SHN_HIRESERVE	0xffff		/* End of reserved indices */
-+
-+/* Legal values for sh_type (section type).  */
-+
-+#define SHT_NULL	  0		/* Section header table entry unused */
-+#define SHT_PROGBITS	  1		/* Program data */
-+#define SHT_SYMTAB	  2		/* Symbol table */
-+#define SHT_STRTAB	  3		/* String table */
-+#define SHT_RELA	  4		/* Relocation entries with addends */
-+#define SHT_HASH	  5		/* Symbol hash table */
-+#define SHT_DYNAMIC	  6		/* Dynamic linking information */
-+#define SHT_NOTE	  7		/* Notes */
-+#define SHT_NOBITS	  8		/* Program space with no data (bss) */
-+#define SHT_REL		  9		/* Relocation entries, no addends */
-+#define SHT_SHLIB	  10		/* Reserved */
-+#define SHT_DYNSYM	  11		/* Dynamic linker symbol table */
-+#define SHT_INIT_ARRAY	  14		/* Array of constructors */
-+#define SHT_FINI_ARRAY	  15		/* Array of destructors */
-+#define SHT_PREINIT_ARRAY 16		/* Array of pre-constructors */
-+#define SHT_GROUP	  17		/* Section group */
-+#define SHT_SYMTAB_SHNDX  18		/* Extended section indeces */
-+#define	SHT_NUM		  19		/* Number of defined types.  */
-+#define SHT_LOOS	  0x60000000	/* Start OS-specific.  */
-+#define SHT_GNU_ATTRIBUTES 0x6ffffff5	/* Object attributes.  */
-+#define SHT_GNU_HASH	  0x6ffffff6	/* GNU-style hash table.  */
-+#define SHT_GNU_LIBLIST	  0x6ffffff7	/* Prelink library list */
-+#define SHT_CHECKSUM	  0x6ffffff8	/* Checksum for DSO content.  */
-+#define SHT_LOSUNW	  0x6ffffffa	/* Sun-specific low bound.  */
-+#define SHT_SUNW_move	  0x6ffffffa
-+#define SHT_SUNW_COMDAT   0x6ffffffb
-+#define SHT_SUNW_syminfo  0x6ffffffc
-+#define SHT_GNU_verdef	  0x6ffffffd	/* Version definition section.  */
-+#define SHT_GNU_verneed	  0x6ffffffe	/* Version needs section.  */
-+#define SHT_GNU_versym	  0x6fffffff	/* Version symbol table.  */
-+#define SHT_HISUNW	  0x6fffffff	/* Sun-specific high bound.  */
-+#define SHT_HIOS	  0x6fffffff	/* End OS-specific type */
-+#define SHT_LOPROC	  0x70000000	/* Start of processor-specific */
-+#define SHT_HIPROC	  0x7fffffff	/* End of processor-specific */
-+#define SHT_LOUSER	  0x80000000	/* Start of application-specific */
-+#define SHT_HIUSER	  0x8fffffff	/* End of application-specific */
-+
-+/* Legal values for sh_flags (section flags).  */
-+
-+#define SHF_WRITE	     (1 << 0)	/* Writable */
-+#define SHF_ALLOC	     (1 << 1)	/* Occupies memory during execution */
-+#define SHF_EXECINSTR	     (1 << 2)	/* Executable */
-+#define SHF_MERGE	     (1 << 4)	/* Might be merged */
-+#define SHF_STRINGS	     (1 << 5)	/* Contains nul-terminated strings */
-+#define SHF_INFO_LINK	     (1 << 6)	/* `sh_info' contains SHT index */
-+#define SHF_LINK_ORDER	     (1 << 7)	/* Preserve order after combining */
-+#define SHF_OS_NONCONFORMING (1 << 8)	/* Non-standard OS specific handling
-+					   required */
-+#define SHF_GROUP	     (1 << 9)	/* Section is member of a group.  */
-+#define SHF_TLS		     (1 << 10)	/* Section hold thread-local data.  */
-+#define SHF_MASKOS	     0x0ff00000	/* OS-specific.  */
-+#define SHF_MASKPROC	     0xf0000000	/* Processor-specific */
-+#define SHF_ORDERED	     (1 << 30)	/* Special ordering requirement
-+					   (Solaris).  */
-+#define SHF_EXCLUDE	     (1 << 31)	/* Section is excluded unless
-+					   referenced or allocated (Solaris).*/
-+
-+/* Section group handling.  */
-+#define GRP_COMDAT	0x1		/* Mark group as COMDAT.  */
-+
-+/* Symbol table entry.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	st_name;		/* Symbol name (string tbl index) */
-+  Elf32_Addr	st_value;		/* Symbol value */
-+  Elf32_Word	st_size;		/* Symbol size */
-+  unsigned char	st_info;		/* Symbol type and binding */
-+  unsigned char	st_other;		/* Symbol visibility */
-+  Elf32_Section	st_shndx;		/* Section index */
-+} Elf32_Sym;
-+
-+typedef struct
-+{
-+  Elf64_Word	st_name;		/* Symbol name (string tbl index) */
-+  unsigned char	st_info;		/* Symbol type and binding */
-+  unsigned char st_other;		/* Symbol visibility */
-+  Elf64_Section	st_shndx;		/* Section index */
-+  Elf64_Addr	st_value;		/* Symbol value */
-+  Elf64_Xword	st_size;		/* Symbol size */
-+} Elf64_Sym;
-+
-+/* The syminfo section if available contains additional information about
-+   every dynamic symbol.  */
-+
-+typedef struct
-+{
-+  Elf32_Half si_boundto;		/* Direct bindings, symbol bound to */
-+  Elf32_Half si_flags;			/* Per symbol flags */
-+} Elf32_Syminfo;
-+
-+typedef struct
-+{
-+  Elf64_Half si_boundto;		/* Direct bindings, symbol bound to */
-+  Elf64_Half si_flags;			/* Per symbol flags */
-+} Elf64_Syminfo;
-+
-+/* Possible values for si_boundto.  */
-+#define SYMINFO_BT_SELF		0xffff	/* Symbol bound to self */
-+#define SYMINFO_BT_PARENT	0xfffe	/* Symbol bound to parent */
-+#define SYMINFO_BT_LOWRESERVE	0xff00	/* Beginning of reserved entries */
-+
-+/* Possible bitmasks for si_flags.  */
-+#define SYMINFO_FLG_DIRECT	0x0001	/* Direct bound symbol */
-+#define SYMINFO_FLG_PASSTHRU	0x0002	/* Pass-thru symbol for translator */
-+#define SYMINFO_FLG_COPY	0x0004	/* Symbol is a copy-reloc */
-+#define SYMINFO_FLG_LAZYLOAD	0x0008	/* Symbol bound to object to be lazy
-+					   loaded */
-+/* Syminfo version values.  */
-+#define SYMINFO_NONE		0
-+#define SYMINFO_CURRENT		1
-+#define SYMINFO_NUM		2
-+
-+
-+/* How to extract and insert information held in the st_info field.  */
-+
-+#define ELF32_ST_BIND(val)		(((unsigned char) (val)) >> 4)
-+#define ELF32_ST_TYPE(val)		((val) & 0xf)
-+#define ELF32_ST_INFO(bind, type)	(((bind) << 4) + ((type) & 0xf))
-+
-+/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field.  */
-+#define ELF64_ST_BIND(val)		ELF32_ST_BIND (val)
-+#define ELF64_ST_TYPE(val)		ELF32_ST_TYPE (val)
-+#define ELF64_ST_INFO(bind, type)	ELF32_ST_INFO ((bind), (type))
-+
-+/* Legal values for ST_BIND subfield of st_info (symbol binding).  */
-+
-+#define STB_LOCAL	0		/* Local symbol */
-+#define STB_GLOBAL	1		/* Global symbol */
-+#define STB_WEAK	2		/* Weak symbol */
-+#define	STB_NUM		3		/* Number of defined types.  */
-+#define STB_LOOS	10		/* Start of OS-specific */
-+#define STB_GNU_UNIQUE	10		/* Unique symbol.  */
-+#define STB_HIOS	12		/* End of OS-specific */
-+#define STB_LOPROC	13		/* Start of processor-specific */
-+#define STB_HIPROC	15		/* End of processor-specific */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_NOTYPE	0		/* Symbol type is unspecified */
-+#define STT_OBJECT	1		/* Symbol is a data object */
-+#define STT_FUNC	2		/* Symbol is a code object */
-+#define STT_SECTION	3		/* Symbol associated with a section */
-+#define STT_FILE	4		/* Symbol's name is file name */
-+#define STT_COMMON	5		/* Symbol is a common data object */
-+#define STT_TLS		6		/* Symbol is thread-local data object*/
-+#define	STT_NUM		7		/* Number of defined types.  */
-+#define STT_LOOS	10		/* Start of OS-specific */
-+#define STT_GNU_IFUNC	10		/* Symbol is indirect code object */
-+#define STT_HIOS	12		/* End of OS-specific */
-+#define STT_LOPROC	13		/* Start of processor-specific */
-+#define STT_HIPROC	15		/* End of processor-specific */
-+
-+
-+/* Symbol table indices are found in the hash buckets and chain table
-+   of a symbol hash table section.  This special index value indicates
-+   the end of a chain, meaning no further symbols are found in that bucket.  */
-+
-+#define STN_UNDEF	0		/* End of a chain.  */
-+
-+
-+/* How to extract and insert information held in the st_other field.  */
-+
-+#define ELF32_ST_VISIBILITY(o)	((o) & 0x03)
-+
-+/* For ELF64 the definitions are the same.  */
-+#define ELF64_ST_VISIBILITY(o)	ELF32_ST_VISIBILITY (o)
-+
-+/* Symbol visibility specification encoded in the st_other field.  */
-+#define STV_DEFAULT	0		/* Default symbol visibility rules */
-+#define STV_INTERNAL	1		/* Processor specific hidden class */
-+#define STV_HIDDEN	2		/* Sym unavailable in other modules */
-+#define STV_PROTECTED	3		/* Not preemptible, not exported */
-+
-+
-+/* Relocation table entry without addend (in section of type SHT_REL).  */
-+
-+typedef struct
-+{
-+  Elf32_Addr	r_offset;		/* Address */
-+  Elf32_Word	r_info;			/* Relocation type and symbol index */
-+} Elf32_Rel;
-+
-+/* I have seen two different definitions of the Elf64_Rel and
-+   Elf64_Rela structures, so we'll leave them out until Novell (or
-+   whoever) gets their act together.  */
-+/* The following, at least, is used on Sparc v9, MIPS, and Alpha.  */
-+
-+typedef struct
-+{
-+  Elf64_Addr	r_offset;		/* Address */
-+  Elf64_Xword	r_info;			/* Relocation type and symbol index */
-+} Elf64_Rel;
-+
-+/* Relocation table entry with addend (in section of type SHT_RELA).  */
-+
-+typedef struct
-+{
-+  Elf32_Addr	r_offset;		/* Address */
-+  Elf32_Word	r_info;			/* Relocation type and symbol index */
-+  Elf32_Sword	r_addend;		/* Addend */
-+} Elf32_Rela;
-+
-+typedef struct
-+{
-+  Elf64_Addr	r_offset;		/* Address */
-+  Elf64_Xword	r_info;			/* Relocation type and symbol index */
-+  Elf64_Sxword	r_addend;		/* Addend */
-+} Elf64_Rela;
-+
-+/* How to extract and insert information held in the r_info field.  */
-+
-+#define ELF32_R_SYM(val)		((val) >> 8)
-+#define ELF32_R_TYPE(val)		((val) & 0xff)
-+#define ELF32_R_INFO(sym, type)		(((sym) << 8) + ((type) & 0xff))
-+
-+#define ELF64_R_SYM(i)			((i) >> 32)
-+#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
-+#define ELF64_R_INFO(sym,type)		((((Elf64_Xword) (sym)) << 32) + (type))
-+
-+/* Program segment header.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	p_type;			/* Segment type */
-+  Elf32_Off	p_offset;		/* Segment file offset */
-+  Elf32_Addr	p_vaddr;		/* Segment virtual address */
-+  Elf32_Addr	p_paddr;		/* Segment physical address */
-+  Elf32_Word	p_filesz;		/* Segment size in file */
-+  Elf32_Word	p_memsz;		/* Segment size in memory */
-+  Elf32_Word	p_flags;		/* Segment flags */
-+  Elf32_Word	p_align;		/* Segment alignment */
-+} Elf32_Phdr;
-+
-+typedef struct
-+{
-+  Elf64_Word	p_type;			/* Segment type */
-+  Elf64_Word	p_flags;		/* Segment flags */
-+  Elf64_Off	p_offset;		/* Segment file offset */
-+  Elf64_Addr	p_vaddr;		/* Segment virtual address */
-+  Elf64_Addr	p_paddr;		/* Segment physical address */
-+  Elf64_Xword	p_filesz;		/* Segment size in file */
-+  Elf64_Xword	p_memsz;		/* Segment size in memory */
-+  Elf64_Xword	p_align;		/* Segment alignment */
-+} Elf64_Phdr;
-+
-+/* Special value for e_phnum.  This indicates that the real number of
-+   program headers is too large to fit into e_phnum.  Instead the real
-+   value is in the field sh_info of section 0.  */
-+
-+#define PN_XNUM		0xffff
-+
-+/* Legal values for p_type (segment type).  */
-+
-+#define	PT_NULL		0		/* Program header table entry unused */
-+#define PT_LOAD		1		/* Loadable program segment */
-+#define PT_DYNAMIC	2		/* Dynamic linking information */
-+#define PT_INTERP	3		/* Program interpreter */
-+#define PT_NOTE		4		/* Auxiliary information */
-+#define PT_SHLIB	5		/* Reserved */
-+#define PT_PHDR		6		/* Entry for header table itself */
-+#define PT_TLS		7		/* Thread-local storage segment */
-+#define	PT_NUM		8		/* Number of defined types */
-+#define PT_LOOS		0x60000000	/* Start of OS-specific */
-+#define PT_GNU_EH_FRAME	0x6474e550	/* GCC .eh_frame_hdr segment */
-+#define PT_GNU_STACK	0x6474e551	/* Indicates stack executability */
-+#define PT_GNU_RELRO	0x6474e552	/* Read-only after relocation */
-+#define PT_LOSUNW	0x6ffffffa
-+#define PT_SUNWBSS	0x6ffffffa	/* Sun Specific segment */
-+#define PT_SUNWSTACK	0x6ffffffb	/* Stack segment */
-+#define PT_HISUNW	0x6fffffff
-+#define PT_HIOS		0x6fffffff	/* End of OS-specific */
-+#define PT_LOPROC	0x70000000	/* Start of processor-specific */
-+#define PT_HIPROC	0x7fffffff	/* End of processor-specific */
-+
-+/* Legal values for p_flags (segment flags).  */
-+
-+#define PF_X		(1 << 0)	/* Segment is executable */
-+#define PF_W		(1 << 1)	/* Segment is writable */
-+#define PF_R		(1 << 2)	/* Segment is readable */
-+#define PF_MASKOS	0x0ff00000	/* OS-specific */
-+#define PF_MASKPROC	0xf0000000	/* Processor-specific */
-+
-+/* Legal values for note segment descriptor types for core files. */
-+
-+#define NT_PRSTATUS	1		/* Contains copy of prstatus struct */
-+#define NT_FPREGSET	2		/* Contains copy of fpregset struct */
-+#define NT_PRPSINFO	3		/* Contains copy of prpsinfo struct */
-+#define NT_PRXREG	4		/* Contains copy of prxregset struct */
-+#define NT_TASKSTRUCT	4		/* Contains copy of task structure */
-+#define NT_PLATFORM	5		/* String from sysinfo(SI_PLATFORM) */
-+#define NT_AUXV		6		/* Contains copy of auxv array */
-+#define NT_GWINDOWS	7		/* Contains copy of gwindows struct */
-+#define NT_ASRS		8		/* Contains copy of asrset struct */
-+#define NT_PSTATUS	10		/* Contains copy of pstatus struct */
-+#define NT_PSINFO	13		/* Contains copy of psinfo struct */
-+#define NT_PRCRED	14		/* Contains copy of prcred struct */
-+#define NT_UTSNAME	15		/* Contains copy of utsname struct */
-+#define NT_LWPSTATUS	16		/* Contains copy of lwpstatus struct */
-+#define NT_LWPSINFO	17		/* Contains copy of lwpinfo struct */
-+#define NT_PRFPXREG	20		/* Contains copy of fprxregset struct */
-+#define NT_PRXFPREG	0x46e62b7f	/* Contains copy of user_fxsr_struct */
-+#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
-+#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
-+#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
-+#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
-+#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
-+#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
-+
-+/* Legal values for the note segment descriptor types for object files.  */
-+
-+#define NT_VERSION	1		/* Contains a version string.  */
-+
-+
-+/* Dynamic section entry.  */
-+
-+typedef struct
-+{
-+  Elf32_Sword	d_tag;			/* Dynamic entry type */
-+  union
-+    {
-+      Elf32_Word d_val;			/* Integer value */
-+      Elf32_Addr d_ptr;			/* Address value */
-+    } d_un;
-+} Elf32_Dyn;
-+
-+typedef struct
-+{
-+  Elf64_Sxword	d_tag;			/* Dynamic entry type */
-+  union
-+    {
-+      Elf64_Xword d_val;		/* Integer value */
-+      Elf64_Addr d_ptr;			/* Address value */
-+    } d_un;
-+} Elf64_Dyn;
-+
-+/* Legal values for d_tag (dynamic entry type).  */
-+
-+#define DT_NULL		0		/* Marks end of dynamic section */
-+#define DT_NEEDED	1		/* Name of needed library */
-+#define DT_PLTRELSZ	2		/* Size in bytes of PLT relocs */
-+#define DT_PLTGOT	3		/* Processor defined value */
-+#define DT_HASH		4		/* Address of symbol hash table */
-+#define DT_STRTAB	5		/* Address of string table */
-+#define DT_SYMTAB	6		/* Address of symbol table */
-+#define DT_RELA		7		/* Address of Rela relocs */
-+#define DT_RELASZ	8		/* Total size of Rela relocs */
-+#define DT_RELAENT	9		/* Size of one Rela reloc */
-+#define DT_STRSZ	10		/* Size of string table */
-+#define DT_SYMENT	11		/* Size of one symbol table entry */
-+#define DT_INIT		12		/* Address of init function */
-+#define DT_FINI		13		/* Address of termination function */
-+#define DT_SONAME	14		/* Name of shared object */
-+#define DT_RPATH	15		/* Library search path (deprecated) */
-+#define DT_SYMBOLIC	16		/* Start symbol search here */
-+#define DT_REL		17		/* Address of Rel relocs */
-+#define DT_RELSZ	18		/* Total size of Rel relocs */
-+#define DT_RELENT	19		/* Size of one Rel reloc */
-+#define DT_PLTREL	20		/* Type of reloc in PLT */
-+#define DT_DEBUG	21		/* For debugging; unspecified */
-+#define DT_TEXTREL	22		/* Reloc might modify .text */
-+#define DT_JMPREL	23		/* Address of PLT relocs */
-+#define	DT_BIND_NOW	24		/* Process relocations of object */
-+#define	DT_INIT_ARRAY	25		/* Array with addresses of init fct */
-+#define	DT_FINI_ARRAY	26		/* Array with addresses of fini fct */
-+#define	DT_INIT_ARRAYSZ	27		/* Size in bytes of DT_INIT_ARRAY */
-+#define	DT_FINI_ARRAYSZ	28		/* Size in bytes of DT_FINI_ARRAY */
-+#define DT_RUNPATH	29		/* Library search path */
-+#define DT_FLAGS	30		/* Flags for the object being loaded */
-+#define DT_ENCODING	32		/* Start of encoded range */
-+#define DT_PREINIT_ARRAY 32		/* Array with addresses of preinit fct*/
-+#define DT_PREINIT_ARRAYSZ 33		/* size in bytes of DT_PREINIT_ARRAY */
-+#define	DT_NUM		34		/* Number used */
-+#define DT_LOOS		0x6000000d	/* Start of OS-specific */
-+#define DT_HIOS		0x6ffff000	/* End of OS-specific */
-+#define DT_LOPROC	0x70000000	/* Start of processor-specific */
-+#define DT_HIPROC	0x7fffffff	/* End of processor-specific */
-+#define	DT_PROCNUM	DT_MIPS_NUM	/* Most used by any processor */
-+
-+/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the
-+   Dyn.d_un.d_val field of the Elf*_Dyn structure.  This follows Sun's
-+   approach.  */
-+#define DT_VALRNGLO	0x6ffffd00
-+#define DT_GNU_PRELINKED 0x6ffffdf5	/* Prelinking timestamp */
-+#define DT_GNU_CONFLICTSZ 0x6ffffdf6	/* Size of conflict section */
-+#define DT_GNU_LIBLISTSZ 0x6ffffdf7	/* Size of library list */
-+#define DT_CHECKSUM	0x6ffffdf8
-+#define DT_PLTPADSZ	0x6ffffdf9
-+#define DT_MOVEENT	0x6ffffdfa
-+#define DT_MOVESZ	0x6ffffdfb
-+#define DT_FEATURE_1	0x6ffffdfc	/* Feature selection (DTF_*).  */
-+#define DT_POSFLAG_1	0x6ffffdfd	/* Flags for DT_* entries, effecting
-+					   the following DT_* entry.  */
-+#define DT_SYMINSZ	0x6ffffdfe	/* Size of syminfo table (in bytes) */
-+#define DT_SYMINENT	0x6ffffdff	/* Entry size of syminfo */
-+#define DT_VALRNGHI	0x6ffffdff
-+#define DT_VALTAGIDX(tag)	(DT_VALRNGHI - (tag))	/* Reverse order! */
-+#define DT_VALNUM 12
-+
-+/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the
-+   Dyn.d_un.d_ptr field of the Elf*_Dyn structure.
-+
-+   If any adjustment is made to the ELF object after it has been
-+   built these entries will need to be adjusted.  */
-+#define DT_ADDRRNGLO	0x6ffffe00
-+#define DT_GNU_HASH	0x6ffffef5	/* GNU-style hash table.  */
-+#define DT_TLSDESC_PLT	0x6ffffef6
-+#define DT_TLSDESC_GOT	0x6ffffef7
-+#define DT_GNU_CONFLICT	0x6ffffef8	/* Start of conflict section */
-+#define DT_GNU_LIBLIST	0x6ffffef9	/* Library list */
-+#define DT_CONFIG	0x6ffffefa	/* Configuration information.  */
-+#define DT_DEPAUDIT	0x6ffffefb	/* Dependency auditing.  */
-+#define DT_AUDIT	0x6ffffefc	/* Object auditing.  */
-+#define	DT_PLTPAD	0x6ffffefd	/* PLT padding.  */
-+#define	DT_MOVETAB	0x6ffffefe	/* Move table.  */
-+#define DT_SYMINFO	0x6ffffeff	/* Syminfo table.  */
-+#define DT_ADDRRNGHI	0x6ffffeff
-+#define DT_ADDRTAGIDX(tag)	(DT_ADDRRNGHI - (tag))	/* Reverse order! */
-+#define DT_ADDRNUM 11
-+
-+/* The versioning entry types.  The next are defined as part of the
-+   GNU extension.  */
-+#define DT_VERSYM	0x6ffffff0
-+
-+#define DT_RELACOUNT	0x6ffffff9
-+#define DT_RELCOUNT	0x6ffffffa
-+
-+/* These were chosen by Sun.  */
-+#define DT_FLAGS_1	0x6ffffffb	/* State flags, see DF_1_* below.  */
-+#define	DT_VERDEF	0x6ffffffc	/* Address of version definition
-+					   table */
-+#define	DT_VERDEFNUM	0x6ffffffd	/* Number of version definitions */
-+#define	DT_VERNEED	0x6ffffffe	/* Address of table with needed
-+					   versions */
-+#define	DT_VERNEEDNUM	0x6fffffff	/* Number of needed versions */
-+#define DT_VERSIONTAGIDX(tag)	(DT_VERNEEDNUM - (tag))	/* Reverse order! */
-+#define DT_VERSIONTAGNUM 16
-+
-+/* Sun added these machine-independent extensions in the "processor-specific"
-+   range.  Be compatible.  */
-+#define DT_AUXILIARY    0x7ffffffd      /* Shared object to load before self */
-+#define DT_FILTER       0x7fffffff      /* Shared object to get values from */
-+#define DT_EXTRATAGIDX(tag)	((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
-+#define DT_EXTRANUM	3
-+
-+/* Values of `d_un.d_val' in the DT_FLAGS entry.  */
-+#define DF_ORIGIN	0x00000001	/* Object may use DF_ORIGIN */
-+#define DF_SYMBOLIC	0x00000002	/* Symbol resolutions starts here */
-+#define DF_TEXTREL	0x00000004	/* Object contains text relocations */
-+#define DF_BIND_NOW	0x00000008	/* No lazy binding for this object */
-+#define DF_STATIC_TLS	0x00000010	/* Module uses the static TLS model */
-+
-+/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1
-+   entry in the dynamic section.  */
-+#define DF_1_NOW	0x00000001	/* Set RTLD_NOW for this object.  */
-+#define DF_1_GLOBAL	0x00000002	/* Set RTLD_GLOBAL for this object.  */
-+#define DF_1_GROUP	0x00000004	/* Set RTLD_GROUP for this object.  */
-+#define DF_1_NODELETE	0x00000008	/* Set RTLD_NODELETE for this object.*/
-+#define DF_1_LOADFLTR	0x00000010	/* Trigger filtee loading at runtime.*/
-+#define DF_1_INITFIRST	0x00000020	/* Set RTLD_INITFIRST for this object*/
-+#define DF_1_NOOPEN	0x00000040	/* Set RTLD_NOOPEN for this object.  */
-+#define DF_1_ORIGIN	0x00000080	/* $ORIGIN must be handled.  */
-+#define DF_1_DIRECT	0x00000100	/* Direct binding enabled.  */
-+#define DF_1_TRANS	0x00000200
-+#define DF_1_INTERPOSE	0x00000400	/* Object is used to interpose.  */
-+#define DF_1_NODEFLIB	0x00000800	/* Ignore default lib search path.  */
-+#define DF_1_NODUMP	0x00001000	/* Object can't be dldump'ed.  */
-+#define DF_1_CONFALT	0x00002000	/* Configuration alternative created.*/
-+#define DF_1_ENDFILTEE	0x00004000	/* Filtee terminates filters search. */
-+#define	DF_1_DISPRELDNE	0x00008000	/* Disp reloc applied at build time. */
-+#define	DF_1_DISPRELPND	0x00010000	/* Disp reloc applied at run-time.  */
-+
-+/* Flags for the feature selection in DT_FEATURE_1.  */
-+#define DTF_1_PARINIT	0x00000001
-+#define DTF_1_CONFEXP	0x00000002
-+
-+/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry.  */
-+#define DF_P1_LAZYLOAD	0x00000001	/* Lazyload following object.  */
-+#define DF_P1_GROUPPERM	0x00000002	/* Symbols from next object are not
-+					   generally available.  */
-+
-+/* Version definition sections.  */
-+
-+typedef struct
-+{
-+  Elf32_Half	vd_version;		/* Version revision */
-+  Elf32_Half	vd_flags;		/* Version information */
-+  Elf32_Half	vd_ndx;			/* Version Index */
-+  Elf32_Half	vd_cnt;			/* Number of associated aux entries */
-+  Elf32_Word	vd_hash;		/* Version name hash value */
-+  Elf32_Word	vd_aux;			/* Offset in bytes to verdaux array */
-+  Elf32_Word	vd_next;		/* Offset in bytes to next verdef
-+					   entry */
-+} Elf32_Verdef;
-+
-+typedef struct
-+{
-+  Elf64_Half	vd_version;		/* Version revision */
-+  Elf64_Half	vd_flags;		/* Version information */
-+  Elf64_Half	vd_ndx;			/* Version Index */
-+  Elf64_Half	vd_cnt;			/* Number of associated aux entries */
-+  Elf64_Word	vd_hash;		/* Version name hash value */
-+  Elf64_Word	vd_aux;			/* Offset in bytes to verdaux array */
-+  Elf64_Word	vd_next;		/* Offset in bytes to next verdef
-+					   entry */
-+} Elf64_Verdef;
-+
-+
-+/* Legal values for vd_version (version revision).  */
-+#define VER_DEF_NONE	0		/* No version */
-+#define VER_DEF_CURRENT	1		/* Current version */
-+#define VER_DEF_NUM	2		/* Given version number */
-+
-+/* Legal values for vd_flags (version information flags).  */
-+#define VER_FLG_BASE	0x1		/* Version definition of file itself */
-+#define VER_FLG_WEAK	0x2		/* Weak version identifier */
-+
-+/* Versym symbol index values.  */
-+#define	VER_NDX_LOCAL		0	/* Symbol is local.  */
-+#define	VER_NDX_GLOBAL		1	/* Symbol is global.  */
-+#define	VER_NDX_LORESERVE	0xff00	/* Beginning of reserved entries.  */
-+#define	VER_NDX_ELIMINATE	0xff01	/* Symbol is to be eliminated.  */
-+
-+/* Auxialiary version information.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	vda_name;		/* Version or dependency names */
-+  Elf32_Word	vda_next;		/* Offset in bytes to next verdaux
-+					   entry */
-+} Elf32_Verdaux;
-+
-+typedef struct
-+{
-+  Elf64_Word	vda_name;		/* Version or dependency names */
-+  Elf64_Word	vda_next;		/* Offset in bytes to next verdaux
-+					   entry */
-+} Elf64_Verdaux;
-+
-+
-+/* Version dependency section.  */
-+
-+typedef struct
-+{
-+  Elf32_Half	vn_version;		/* Version of structure */
-+  Elf32_Half	vn_cnt;			/* Number of associated aux entries */
-+  Elf32_Word	vn_file;		/* Offset of filename for this
-+					   dependency */
-+  Elf32_Word	vn_aux;			/* Offset in bytes to vernaux array */
-+  Elf32_Word	vn_next;		/* Offset in bytes to next verneed
-+					   entry */
-+} Elf32_Verneed;
-+
-+typedef struct
-+{
-+  Elf64_Half	vn_version;		/* Version of structure */
-+  Elf64_Half	vn_cnt;			/* Number of associated aux entries */
-+  Elf64_Word	vn_file;		/* Offset of filename for this
-+					   dependency */
-+  Elf64_Word	vn_aux;			/* Offset in bytes to vernaux array */
-+  Elf64_Word	vn_next;		/* Offset in bytes to next verneed
-+					   entry */
-+} Elf64_Verneed;
-+
-+
-+/* Legal values for vn_version (version revision).  */
-+#define VER_NEED_NONE	 0		/* No version */
-+#define VER_NEED_CURRENT 1		/* Current version */
-+#define VER_NEED_NUM	 2		/* Given version number */
-+
-+/* Auxiliary needed version information.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	vna_hash;		/* Hash value of dependency name */
-+  Elf32_Half	vna_flags;		/* Dependency specific information */
-+  Elf32_Half	vna_other;		/* Unused */
-+  Elf32_Word	vna_name;		/* Dependency name string offset */
-+  Elf32_Word	vna_next;		/* Offset in bytes to next vernaux
-+					   entry */
-+} Elf32_Vernaux;
-+
-+typedef struct
-+{
-+  Elf64_Word	vna_hash;		/* Hash value of dependency name */
-+  Elf64_Half	vna_flags;		/* Dependency specific information */
-+  Elf64_Half	vna_other;		/* Unused */
-+  Elf64_Word	vna_name;		/* Dependency name string offset */
-+  Elf64_Word	vna_next;		/* Offset in bytes to next vernaux
-+					   entry */
-+} Elf64_Vernaux;
-+
-+
-+/* Legal values for vna_flags.  */
-+#define VER_FLG_WEAK	0x2		/* Weak version identifier */
-+
-+
-+/* Auxiliary vector.  */
-+
-+/* This vector is normally only used by the program interpreter.  The
-+   usual definition in an ABI supplement uses the name auxv_t.  The
-+   vector is not usually defined in a standard <elf.h> file, but it
-+   can't hurt.  We rename it to avoid conflicts.  The sizes of these
-+   types are an arrangement between the exec server and the program
-+   interpreter, so we don't fully specify them here.  */
-+
-+typedef struct
-+{
-+  uint32_t a_type;		/* Entry type */
-+  union
-+    {
-+      uint32_t a_val;		/* Integer value */
-+      /* We use to have pointer elements added here.  We cannot do that,
-+	 though, since it does not work when using 32-bit definitions
-+	 on 64-bit platforms and vice versa.  */
-+    } a_un;
-+} Elf32_auxv_t;
-+
-+typedef struct
-+{
-+  uint64_t a_type;		/* Entry type */
-+  union
-+    {
-+      uint64_t a_val;		/* Integer value */
-+      /* We use to have pointer elements added here.  We cannot do that,
-+	 though, since it does not work when using 32-bit definitions
-+	 on 64-bit platforms and vice versa.  */
-+    } a_un;
-+} Elf64_auxv_t;
-+
-+/* Legal values for a_type (entry type).  */
-+
-+#define AT_NULL		0		/* End of vector */
-+#define AT_IGNORE	1		/* Entry should be ignored */
-+#define AT_EXECFD	2		/* File descriptor of program */
-+#define AT_PHDR		3		/* Program headers for program */
-+#define AT_PHENT	4		/* Size of program header entry */
-+#define AT_PHNUM	5		/* Number of program headers */
-+#define AT_PAGESZ	6		/* System page size */
-+#define AT_BASE		7		/* Base address of interpreter */
-+#define AT_FLAGS	8		/* Flags */
-+#define AT_ENTRY	9		/* Entry point of program */
-+#define AT_NOTELF	10		/* Program is not ELF */
-+#define AT_UID		11		/* Real uid */
-+#define AT_EUID		12		/* Effective uid */
-+#define AT_GID		13		/* Real gid */
-+#define AT_EGID		14		/* Effective gid */
-+#define AT_CLKTCK	17		/* Frequency of times() */
-+
-+/* Some more special a_type values describing the hardware.  */
-+#define AT_PLATFORM	15		/* String identifying platform.  */
-+#define AT_HWCAP	16		/* Machine dependent hints about
-+					   processor capabilities.  */
-+
-+/* This entry gives some information about the FPU initialization
-+   performed by the kernel.  */
-+#define AT_FPUCW	18		/* Used FPU control word.  */
-+
-+/* Cache block sizes.  */
-+#define AT_DCACHEBSIZE	19		/* Data cache block size.  */
-+#define AT_ICACHEBSIZE	20		/* Instruction cache block size.  */
-+#define AT_UCACHEBSIZE	21		/* Unified cache block size.  */
-+
-+/* A special ignored value for PPC, used by the kernel to control the
-+   interpretation of the AUXV. Must be > 16.  */
-+#define AT_IGNOREPPC	22		/* Entry should be ignored.  */
-+
-+#define	AT_SECURE	23		/* Boolean, was exec setuid-like?  */
-+
-+#define AT_BASE_PLATFORM 24		/* String identifying real platforms.*/
-+
-+#define AT_RANDOM	25		/* Address of 16 random bytes.  */
-+
-+#define AT_EXECFN	31		/* Filename of executable.  */
-+
-+/* Pointer to the global system page used for system calls and other
-+   nice things.  */
-+#define AT_SYSINFO	32
-+#define AT_SYSINFO_EHDR	33
-+
-+/* Shapes of the caches.  Bits 0-3 contains associativity; bits 4-7 contains
-+   log2 of line size; mask those to get cache size.  */
-+#define AT_L1I_CACHESHAPE	34
-+#define AT_L1D_CACHESHAPE	35
-+#define AT_L2_CACHESHAPE	36
-+#define AT_L3_CACHESHAPE	37
-+
-+/* Note section contents.  Each entry in the note section begins with
-+   a header of a fixed form.  */
-+
-+typedef struct
-+{
-+  Elf32_Word n_namesz;			/* Length of the note's name.  */
-+  Elf32_Word n_descsz;			/* Length of the note's descriptor.  */
-+  Elf32_Word n_type;			/* Type of the note.  */
-+} Elf32_Nhdr;
-+
-+typedef struct
-+{
-+  Elf64_Word n_namesz;			/* Length of the note's name.  */
-+  Elf64_Word n_descsz;			/* Length of the note's descriptor.  */
-+  Elf64_Word n_type;			/* Type of the note.  */
-+} Elf64_Nhdr;
-+
-+/* Known names of notes.  */
-+
-+/* Solaris entries in the note section have this name.  */
-+#define ELF_NOTE_SOLARIS	"SUNW Solaris"
-+
-+/* Note entries for GNU systems have this name.  */
-+#define ELF_NOTE_GNU		"GNU"
-+
-+
-+/* Defined types of notes for Solaris.  */
-+
-+/* Value of descriptor (one word) is desired pagesize for the binary.  */
-+#define ELF_NOTE_PAGESIZE_HINT	1
-+
-+
-+/* Defined note types for GNU systems.  */
-+
-+/* ABI information.  The descriptor consists of words:
-+   word 0: OS descriptor
-+   word 1: major version of the ABI
-+   word 2: minor version of the ABI
-+   word 3: subminor version of the ABI
-+*/
-+#define NT_GNU_ABI_TAG	1
-+#define ELF_NOTE_ABI	NT_GNU_ABI_TAG /* Old name.  */
-+
-+/* Known OSes.  These values can appear in word 0 of an
-+   NT_GNU_ABI_TAG note section entry.  */
-+#define ELF_NOTE_OS_LINUX	0
-+#define ELF_NOTE_OS_GNU		1
-+#define ELF_NOTE_OS_SOLARIS2	2
-+#define ELF_NOTE_OS_FREEBSD	3
-+
-+/* Synthetic hwcap information.  The descriptor begins with two words:
-+   word 0: number of entries
-+   word 1: bitmask of enabled entries
-+   Then follow variable-length entries, one byte followed by a
-+   '\0'-terminated hwcap name string.  The byte gives the bit
-+   number to test if enabled, (1U << bit) & bitmask.  */
-+#define NT_GNU_HWCAP	2
-+
-+/* Build ID bits as generated by ld --build-id.
-+   The descriptor consists of any nonzero number of bytes.  */
-+#define NT_GNU_BUILD_ID	3
-+
-+/* Version note generated by GNU gold containing a version string.  */
-+#define NT_GNU_GOLD_VERSION	4
-+
-+
-+/* Move records.  */
-+typedef struct
-+{
-+  Elf32_Xword m_value;		/* Symbol value.  */
-+  Elf32_Word m_info;		/* Size and index.  */
-+  Elf32_Word m_poffset;		/* Symbol offset.  */
-+  Elf32_Half m_repeat;		/* Repeat count.  */
-+  Elf32_Half m_stride;		/* Stride info.  */
-+} Elf32_Move;
-+
-+typedef struct
-+{
-+  Elf64_Xword m_value;		/* Symbol value.  */
-+  Elf64_Xword m_info;		/* Size and index.  */
-+  Elf64_Xword m_poffset;	/* Symbol offset.  */
-+  Elf64_Half m_repeat;		/* Repeat count.  */
-+  Elf64_Half m_stride;		/* Stride info.  */
-+} Elf64_Move;
-+
-+/* Macro to construct move records.  */
-+#define ELF32_M_SYM(info)	((info) >> 8)
-+#define ELF32_M_SIZE(info)	((unsigned char) (info))
-+#define ELF32_M_INFO(sym, size)	(((sym) << 8) + (unsigned char) (size))
-+
-+#define ELF64_M_SYM(info)	ELF32_M_SYM (info)
-+#define ELF64_M_SIZE(info)	ELF32_M_SIZE (info)
-+#define ELF64_M_INFO(sym, size)	ELF32_M_INFO (sym, size)
-+
-+
-+/* Motorola 68k specific definitions.  */
-+
-+/* Values for Elf32_Ehdr.e_flags.  */
-+#define EF_CPU32	0x00810000
-+
-+/* m68k relocs.  */
-+
-+#define R_68K_NONE	0		/* No reloc */
-+#define R_68K_32	1		/* Direct 32 bit  */
-+#define R_68K_16	2		/* Direct 16 bit  */
-+#define R_68K_8		3		/* Direct 8 bit  */
-+#define R_68K_PC32	4		/* PC relative 32 bit */
-+#define R_68K_PC16	5		/* PC relative 16 bit */
-+#define R_68K_PC8	6		/* PC relative 8 bit */
-+#define R_68K_GOT32	7		/* 32 bit PC relative GOT entry */
-+#define R_68K_GOT16	8		/* 16 bit PC relative GOT entry */
-+#define R_68K_GOT8	9		/* 8 bit PC relative GOT entry */
-+#define R_68K_GOT32O	10		/* 32 bit GOT offset */
-+#define R_68K_GOT16O	11		/* 16 bit GOT offset */
-+#define R_68K_GOT8O	12		/* 8 bit GOT offset */
-+#define R_68K_PLT32	13		/* 32 bit PC relative PLT address */
-+#define R_68K_PLT16	14		/* 16 bit PC relative PLT address */
-+#define R_68K_PLT8	15		/* 8 bit PC relative PLT address */
-+#define R_68K_PLT32O	16		/* 32 bit PLT offset */
-+#define R_68K_PLT16O	17		/* 16 bit PLT offset */
-+#define R_68K_PLT8O	18		/* 8 bit PLT offset */
-+#define R_68K_COPY	19		/* Copy symbol at runtime */
-+#define R_68K_GLOB_DAT	20		/* Create GOT entry */
-+#define R_68K_JMP_SLOT	21		/* Create PLT entry */
-+#define R_68K_RELATIVE	22		/* Adjust by program base */
-+#define R_68K_TLS_GD32      25          /* 32 bit GOT offset for GD */
-+#define R_68K_TLS_GD16      26          /* 16 bit GOT offset for GD */
-+#define R_68K_TLS_GD8       27          /* 8 bit GOT offset for GD */
-+#define R_68K_TLS_LDM32     28          /* 32 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM16     29          /* 16 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM8      30          /* 8 bit GOT offset for LDM */
-+#define R_68K_TLS_LDO32     31          /* 32 bit module-relative offset */
-+#define R_68K_TLS_LDO16     32          /* 16 bit module-relative offset */
-+#define R_68K_TLS_LDO8      33          /* 8 bit module-relative offset */
-+#define R_68K_TLS_IE32      34          /* 32 bit GOT offset for IE */
-+#define R_68K_TLS_IE16      35          /* 16 bit GOT offset for IE */
-+#define R_68K_TLS_IE8       36          /* 8 bit GOT offset for IE */
-+#define R_68K_TLS_LE32      37          /* 32 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_LE16      38          /* 16 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_LE8       39          /* 8 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_DTPMOD32  40          /* 32 bit module number */
-+#define R_68K_TLS_DTPREL32  41          /* 32 bit module-relative offset */
-+#define R_68K_TLS_TPREL32   42          /* 32 bit TP-relative offset */
-+/* Keep this the last entry.  */
-+#define R_68K_NUM	43
-+
-+/* Intel 80386 specific definitions.  */
-+
-+/* i386 relocs.  */
-+
-+#define R_386_NONE	   0		/* No reloc */
-+#define R_386_32	   1		/* Direct 32 bit  */
-+#define R_386_PC32	   2		/* PC relative 32 bit */
-+#define R_386_GOT32	   3		/* 32 bit GOT entry */
-+#define R_386_PLT32	   4		/* 32 bit PLT address */
-+#define R_386_COPY	   5		/* Copy symbol at runtime */
-+#define R_386_GLOB_DAT	   6		/* Create GOT entry */
-+#define R_386_JMP_SLOT	   7		/* Create PLT entry */
-+#define R_386_RELATIVE	   8		/* Adjust by program base */
-+#define R_386_GOTOFF	   9		/* 32 bit offset to GOT */
-+#define R_386_GOTPC	   10		/* 32 bit PC relative offset to GOT */
-+#define R_386_32PLT	   11
-+#define R_386_TLS_TPOFF	   14		/* Offset in static TLS block */
-+#define R_386_TLS_IE	   15		/* Address of GOT entry for static TLS
-+					   block offset */
-+#define R_386_TLS_GOTIE	   16		/* GOT entry for static TLS block
-+					   offset */
-+#define R_386_TLS_LE	   17		/* Offset relative to static TLS
-+					   block */
-+#define R_386_TLS_GD	   18		/* Direct 32 bit for GNU version of
-+					   general dynamic thread local data */
-+#define R_386_TLS_LDM	   19		/* Direct 32 bit for GNU version of
-+					   local dynamic thread local data
-+					   in LE code */
-+#define R_386_16	   20
-+#define R_386_PC16	   21
-+#define R_386_8		   22
-+#define R_386_PC8	   23
-+#define R_386_TLS_GD_32	   24		/* Direct 32 bit for general dynamic
-+					   thread local data */
-+#define R_386_TLS_GD_PUSH  25		/* Tag for pushl in GD TLS code */
-+#define R_386_TLS_GD_CALL  26		/* Relocation for call to
-+					   __tls_get_addr() */
-+#define R_386_TLS_GD_POP   27		/* Tag for popl in GD TLS code */
-+#define R_386_TLS_LDM_32   28		/* Direct 32 bit for local dynamic
-+					   thread local data in LE code */
-+#define R_386_TLS_LDM_PUSH 29		/* Tag for pushl in LDM TLS code */
-+#define R_386_TLS_LDM_CALL 30		/* Relocation for call to
-+					   __tls_get_addr() in LDM code */
-+#define R_386_TLS_LDM_POP  31		/* Tag for popl in LDM TLS code */
-+#define R_386_TLS_LDO_32   32		/* Offset relative to TLS block */
-+#define R_386_TLS_IE_32	   33		/* GOT entry for negated static TLS
-+					   block offset */
-+#define R_386_TLS_LE_32	   34		/* Negated offset relative to static
-+					   TLS block */
-+#define R_386_TLS_DTPMOD32 35		/* ID of module containing symbol */
-+#define R_386_TLS_DTPOFF32 36		/* Offset in TLS block */
-+#define R_386_TLS_TPOFF32  37		/* Negated offset in static TLS block */
-+/* 38? */
-+#define R_386_TLS_GOTDESC  39		/* GOT offset for TLS descriptor.  */
-+#define R_386_TLS_DESC_CALL 40		/* Marker of call through TLS
-+					   descriptor for
-+					   relaxation.  */
-+#define R_386_TLS_DESC     41		/* TLS descriptor containing
-+					   pointer to code and to
-+					   argument, returning the TLS
-+					   offset for the symbol.  */
-+#define R_386_IRELATIVE	   42		/* Adjust indirectly by program base */
-+/* Keep this the last entry.  */
-+#define R_386_NUM	   43
-+
-+/* SUN SPARC specific definitions.  */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_SPARC_REGISTER	13	/* Global register reserved to app. */
-+
-+/* Values for Elf64_Ehdr.e_flags.  */
-+
-+#define EF_SPARCV9_MM		3
-+#define EF_SPARCV9_TSO		0
-+#define EF_SPARCV9_PSO		1
-+#define EF_SPARCV9_RMO		2
-+#define EF_SPARC_LEDATA		0x800000 /* little endian data */
-+#define EF_SPARC_EXT_MASK	0xFFFF00
-+#define EF_SPARC_32PLUS		0x000100 /* generic V8+ features */
-+#define EF_SPARC_SUN_US1	0x000200 /* Sun UltraSPARC1 extensions */
-+#define EF_SPARC_HAL_R1		0x000400 /* HAL R1 extensions */
-+#define EF_SPARC_SUN_US3	0x000800 /* Sun UltraSPARCIII extensions */
-+
-+/* SPARC relocs.  */
-+
-+#define R_SPARC_NONE		0	/* No reloc */
-+#define R_SPARC_8		1	/* Direct 8 bit */
-+#define R_SPARC_16		2	/* Direct 16 bit */
-+#define R_SPARC_32		3	/* Direct 32 bit */
-+#define R_SPARC_DISP8		4	/* PC relative 8 bit */
-+#define R_SPARC_DISP16		5	/* PC relative 16 bit */
-+#define R_SPARC_DISP32		6	/* PC relative 32 bit */
-+#define R_SPARC_WDISP30		7	/* PC relative 30 bit shifted */
-+#define R_SPARC_WDISP22		8	/* PC relative 22 bit shifted */
-+#define R_SPARC_HI22		9	/* High 22 bit */
-+#define R_SPARC_22		10	/* Direct 22 bit */
-+#define R_SPARC_13		11	/* Direct 13 bit */
-+#define R_SPARC_LO10		12	/* Truncated 10 bit */
-+#define R_SPARC_GOT10		13	/* Truncated 10 bit GOT entry */
-+#define R_SPARC_GOT13		14	/* 13 bit GOT entry */
-+#define R_SPARC_GOT22		15	/* 22 bit GOT entry shifted */
-+#define R_SPARC_PC10		16	/* PC relative 10 bit truncated */
-+#define R_SPARC_PC22		17	/* PC relative 22 bit shifted */
-+#define R_SPARC_WPLT30		18	/* 30 bit PC relative PLT address */
-+#define R_SPARC_COPY		19	/* Copy symbol at runtime */
-+#define R_SPARC_GLOB_DAT	20	/* Create GOT entry */
-+#define R_SPARC_JMP_SLOT	21	/* Create PLT entry */
-+#define R_SPARC_RELATIVE	22	/* Adjust by program base */
-+#define R_SPARC_UA32		23	/* Direct 32 bit unaligned */
-+
-+/* Additional Sparc64 relocs.  */
-+
-+#define R_SPARC_PLT32		24	/* Direct 32 bit ref to PLT entry */
-+#define R_SPARC_HIPLT22		25	/* High 22 bit PLT entry */
-+#define R_SPARC_LOPLT10		26	/* Truncated 10 bit PLT entry */
-+#define R_SPARC_PCPLT32		27	/* PC rel 32 bit ref to PLT entry */
-+#define R_SPARC_PCPLT22		28	/* PC rel high 22 bit PLT entry */
-+#define R_SPARC_PCPLT10		29	/* PC rel trunc 10 bit PLT entry */
-+#define R_SPARC_10		30	/* Direct 10 bit */
-+#define R_SPARC_11		31	/* Direct 11 bit */
-+#define R_SPARC_64		32	/* Direct 64 bit */
-+#define R_SPARC_OLO10		33	/* 10bit with secondary 13bit addend */
-+#define R_SPARC_HH22		34	/* Top 22 bits of direct 64 bit */
-+#define R_SPARC_HM10		35	/* High middle 10 bits of ... */
-+#define R_SPARC_LM22		36	/* Low middle 22 bits of ... */
-+#define R_SPARC_PC_HH22		37	/* Top 22 bits of pc rel 64 bit */
-+#define R_SPARC_PC_HM10		38	/* High middle 10 bit of ... */
-+#define R_SPARC_PC_LM22		39	/* Low miggle 22 bits of ... */
-+#define R_SPARC_WDISP16		40	/* PC relative 16 bit shifted */
-+#define R_SPARC_WDISP19		41	/* PC relative 19 bit shifted */
-+#define R_SPARC_GLOB_JMP	42	/* was part of v9 ABI but was removed */
-+#define R_SPARC_7		43	/* Direct 7 bit */
-+#define R_SPARC_5		44	/* Direct 5 bit */
-+#define R_SPARC_6		45	/* Direct 6 bit */
-+#define R_SPARC_DISP64		46	/* PC relative 64 bit */
-+#define R_SPARC_PLT64		47	/* Direct 64 bit ref to PLT entry */
-+#define R_SPARC_HIX22		48	/* High 22 bit complemented */
-+#define R_SPARC_LOX10		49	/* Truncated 11 bit complemented */
-+#define R_SPARC_H44		50	/* Direct high 12 of 44 bit */
-+#define R_SPARC_M44		51	/* Direct mid 22 of 44 bit */
-+#define R_SPARC_L44		52	/* Direct low 10 of 44 bit */
-+#define R_SPARC_REGISTER	53	/* Global register usage */
-+#define R_SPARC_UA64		54	/* Direct 64 bit unaligned */
-+#define R_SPARC_UA16		55	/* Direct 16 bit unaligned */
-+#define R_SPARC_TLS_GD_HI22	56
-+#define R_SPARC_TLS_GD_LO10	57
-+#define R_SPARC_TLS_GD_ADD	58
-+#define R_SPARC_TLS_GD_CALL	59
-+#define R_SPARC_TLS_LDM_HI22	60
-+#define R_SPARC_TLS_LDM_LO10	61
-+#define R_SPARC_TLS_LDM_ADD	62
-+#define R_SPARC_TLS_LDM_CALL	63
-+#define R_SPARC_TLS_LDO_HIX22	64
-+#define R_SPARC_TLS_LDO_LOX10	65
-+#define R_SPARC_TLS_LDO_ADD	66
-+#define R_SPARC_TLS_IE_HI22	67
-+#define R_SPARC_TLS_IE_LO10	68
-+#define R_SPARC_TLS_IE_LD	69
-+#define R_SPARC_TLS_IE_LDX	70
-+#define R_SPARC_TLS_IE_ADD	71
-+#define R_SPARC_TLS_LE_HIX22	72
-+#define R_SPARC_TLS_LE_LOX10	73
-+#define R_SPARC_TLS_DTPMOD32	74
-+#define R_SPARC_TLS_DTPMOD64	75
-+#define R_SPARC_TLS_DTPOFF32	76
-+#define R_SPARC_TLS_DTPOFF64	77
-+#define R_SPARC_TLS_TPOFF32	78
-+#define R_SPARC_TLS_TPOFF64	79
-+#define R_SPARC_GOTDATA_HIX22	80
-+#define R_SPARC_GOTDATA_LOX10	81
-+#define R_SPARC_GOTDATA_OP_HIX22	82
-+#define R_SPARC_GOTDATA_OP_LOX10	83
-+#define R_SPARC_GOTDATA_OP	84
-+#define R_SPARC_H34		85
-+#define R_SPARC_SIZE32		86
-+#define R_SPARC_SIZE64		87
-+#define R_SPARC_WDISP10		88
-+#define R_SPARC_JMP_IREL	248
-+#define R_SPARC_IRELATIVE	249
-+#define R_SPARC_GNU_VTINHERIT	250
-+#define R_SPARC_GNU_VTENTRY	251
-+#define R_SPARC_REV32		252
-+/* Keep this the last entry.  */
-+#define R_SPARC_NUM		253
-+
-+/* For Sparc64, legal values for d_tag of Elf64_Dyn.  */
-+
-+#define DT_SPARC_REGISTER 0x70000001
-+#define DT_SPARC_NUM	2
-+
-+/* MIPS R3000 specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr.  */
-+
-+#define EF_MIPS_NOREORDER   1		/* A .noreorder directive was used */
-+#define EF_MIPS_PIC	    2		/* Contains PIC code */
-+#define EF_MIPS_CPIC	    4		/* Uses PIC calling sequence */
-+#define EF_MIPS_XGOT	    8
-+#define EF_MIPS_64BIT_WHIRL 16
-+#define EF_MIPS_ABI2	    32
-+#define EF_MIPS_ABI_ON32    64
-+#define EF_MIPS_ARCH	    0xf0000000	/* MIPS architecture level */
-+
-+/* Legal values for MIPS architecture level.  */
-+
-+#define EF_MIPS_ARCH_1	    0x00000000	/* -mips1 code.  */
-+#define EF_MIPS_ARCH_2	    0x10000000	/* -mips2 code.  */
-+#define EF_MIPS_ARCH_3	    0x20000000	/* -mips3 code.  */
-+#define EF_MIPS_ARCH_4	    0x30000000	/* -mips4 code.  */
-+#define EF_MIPS_ARCH_5	    0x40000000	/* -mips5 code.  */
-+#define EF_MIPS_ARCH_32	    0x60000000	/* MIPS32 code.  */
-+#define EF_MIPS_ARCH_64	    0x70000000	/* MIPS64 code.  */
-+
-+/* The following are non-official names and should not be used.  */
-+
-+#define E_MIPS_ARCH_1	  0x00000000	/* -mips1 code.  */
-+#define E_MIPS_ARCH_2	  0x10000000	/* -mips2 code.  */
-+#define E_MIPS_ARCH_3	  0x20000000	/* -mips3 code.  */
-+#define E_MIPS_ARCH_4	  0x30000000	/* -mips4 code.  */
-+#define E_MIPS_ARCH_5	  0x40000000	/* -mips5 code.  */
-+#define E_MIPS_ARCH_32	  0x60000000	/* MIPS32 code.  */
-+#define E_MIPS_ARCH_64	  0x70000000	/* MIPS64 code.  */
-+
-+/* Special section indices.  */
-+
-+#define SHN_MIPS_ACOMMON    0xff00	/* Allocated common symbols */
-+#define SHN_MIPS_TEXT	    0xff01	/* Allocated test symbols.  */
-+#define SHN_MIPS_DATA	    0xff02	/* Allocated data symbols.  */
-+#define SHN_MIPS_SCOMMON    0xff03	/* Small common symbols */
-+#define SHN_MIPS_SUNDEFINED 0xff04	/* Small undefined symbols */
-+
-+/* Legal values for sh_type field of Elf32_Shdr.  */
-+
-+#define SHT_MIPS_LIBLIST       0x70000000 /* Shared objects used in link */
-+#define SHT_MIPS_MSYM	       0x70000001
-+#define SHT_MIPS_CONFLICT      0x70000002 /* Conflicting symbols */
-+#define SHT_MIPS_GPTAB	       0x70000003 /* Global data area sizes */
-+#define SHT_MIPS_UCODE	       0x70000004 /* Reserved for SGI/MIPS compilers */
-+#define SHT_MIPS_DEBUG	       0x70000005 /* MIPS ECOFF debugging information*/
-+#define SHT_MIPS_REGINFO       0x70000006 /* Register usage information */
-+#define SHT_MIPS_PACKAGE       0x70000007
-+#define SHT_MIPS_PACKSYM       0x70000008
-+#define SHT_MIPS_RELD	       0x70000009
-+#define SHT_MIPS_IFACE         0x7000000b
-+#define SHT_MIPS_CONTENT       0x7000000c
-+#define SHT_MIPS_OPTIONS       0x7000000d /* Miscellaneous options.  */
-+#define SHT_MIPS_SHDR	       0x70000010
-+#define SHT_MIPS_FDESC	       0x70000011
-+#define SHT_MIPS_EXTSYM	       0x70000012
-+#define SHT_MIPS_DENSE	       0x70000013
-+#define SHT_MIPS_PDESC	       0x70000014
-+#define SHT_MIPS_LOCSYM	       0x70000015
-+#define SHT_MIPS_AUXSYM	       0x70000016
-+#define SHT_MIPS_OPTSYM	       0x70000017
-+#define SHT_MIPS_LOCSTR	       0x70000018
-+#define SHT_MIPS_LINE	       0x70000019
-+#define SHT_MIPS_RFDESC	       0x7000001a
-+#define SHT_MIPS_DELTASYM      0x7000001b
-+#define SHT_MIPS_DELTAINST     0x7000001c
-+#define SHT_MIPS_DELTACLASS    0x7000001d
-+#define SHT_MIPS_DWARF         0x7000001e /* DWARF debugging information.  */
-+#define SHT_MIPS_DELTADECL     0x7000001f
-+#define SHT_MIPS_SYMBOL_LIB    0x70000020
-+#define SHT_MIPS_EVENTS	       0x70000021 /* Event section.  */
-+#define SHT_MIPS_TRANSLATE     0x70000022
-+#define SHT_MIPS_PIXIE	       0x70000023
-+#define SHT_MIPS_XLATE	       0x70000024
-+#define SHT_MIPS_XLATE_DEBUG   0x70000025
-+#define SHT_MIPS_WHIRL	       0x70000026
-+#define SHT_MIPS_EH_REGION     0x70000027
-+#define SHT_MIPS_XLATE_OLD     0x70000028
-+#define SHT_MIPS_PDR_EXCEPTION 0x70000029
-+
-+/* Legal values for sh_flags field of Elf32_Shdr.  */
-+
-+#define SHF_MIPS_GPREL	 0x10000000	/* Must be part of global data area */
-+#define SHF_MIPS_MERGE	 0x20000000
-+#define SHF_MIPS_ADDR	 0x40000000
-+#define SHF_MIPS_STRINGS 0x80000000
-+#define SHF_MIPS_NOSTRIP 0x08000000
-+#define SHF_MIPS_LOCAL	 0x04000000
-+#define SHF_MIPS_NAMES	 0x02000000
-+#define SHF_MIPS_NODUPE	 0x01000000
-+
-+
-+/* Symbol tables.  */
-+
-+/* MIPS specific values for `st_other'.  */
-+#define STO_MIPS_DEFAULT		0x0
-+#define STO_MIPS_INTERNAL		0x1
-+#define STO_MIPS_HIDDEN			0x2
-+#define STO_MIPS_PROTECTED		0x3
-+#define STO_MIPS_PLT			0x8
-+#define STO_MIPS_SC_ALIGN_UNUSED	0xff
-+
-+/* MIPS specific values for `st_info'.  */
-+#define STB_MIPS_SPLIT_COMMON		13
-+
-+/* Entries found in sections of type SHT_MIPS_GPTAB.  */
-+
-+typedef union
-+{
-+  struct
-+    {
-+      Elf32_Word gt_current_g_value;	/* -G value used for compilation */
-+      Elf32_Word gt_unused;		/* Not used */
-+    } gt_header;			/* First entry in section */
-+  struct
-+    {
-+      Elf32_Word gt_g_value;		/* If this value were used for -G */
-+      Elf32_Word gt_bytes;		/* This many bytes would be used */
-+    } gt_entry;				/* Subsequent entries in section */
-+} Elf32_gptab;
-+
-+/* Entry found in sections of type SHT_MIPS_REGINFO.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	ri_gprmask;		/* General registers used */
-+  Elf32_Word	ri_cprmask[4];		/* Coprocessor registers used */
-+  Elf32_Sword	ri_gp_value;		/* $gp register value */
-+} Elf32_RegInfo;
-+
-+/* Entries found in sections of type SHT_MIPS_OPTIONS.  */
-+
-+typedef struct
-+{
-+  unsigned char kind;		/* Determines interpretation of the
-+				   variable part of descriptor.  */
-+  unsigned char size;		/* Size of descriptor, including header.  */
-+  Elf32_Section section;	/* Section header index of section affected,
-+				   0 for global options.  */
-+  Elf32_Word info;		/* Kind-specific information.  */
-+} Elf_Options;
-+
-+/* Values for `kind' field in Elf_Options.  */
-+
-+#define ODK_NULL	0	/* Undefined.  */
-+#define ODK_REGINFO	1	/* Register usage information.  */
-+#define ODK_EXCEPTIONS	2	/* Exception processing options.  */
-+#define ODK_PAD		3	/* Section padding options.  */
-+#define ODK_HWPATCH	4	/* Hardware workarounds performed */
-+#define ODK_FILL	5	/* record the fill value used by the linker. */
-+#define ODK_TAGS	6	/* reserve space for desktop tools to write. */
-+#define ODK_HWAND	7	/* HW workarounds.  'AND' bits when merging. */
-+#define ODK_HWOR	8	/* HW workarounds.  'OR' bits when merging.  */
-+
-+/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries.  */
-+
-+#define OEX_FPU_MIN	0x1f	/* FPE's which MUST be enabled.  */
-+#define OEX_FPU_MAX	0x1f00	/* FPE's which MAY be enabled.  */
-+#define OEX_PAGE0	0x10000	/* page zero must be mapped.  */
-+#define OEX_SMM		0x20000	/* Force sequential memory mode?  */
-+#define OEX_FPDBUG	0x40000	/* Force floating point debug mode?  */
-+#define OEX_PRECISEFP	OEX_FPDBUG
-+#define OEX_DISMISS	0x80000	/* Dismiss invalid address faults?  */
-+
-+#define OEX_FPU_INVAL	0x10
-+#define OEX_FPU_DIV0	0x08
-+#define OEX_FPU_OFLO	0x04
-+#define OEX_FPU_UFLO	0x02
-+#define OEX_FPU_INEX	0x01
-+
-+/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry.  */
-+
-+#define OHW_R4KEOP	0x1	/* R4000 end-of-page patch.  */
-+#define OHW_R8KPFETCH	0x2	/* may need R8000 prefetch patch.  */
-+#define OHW_R5KEOP	0x4	/* R5000 end-of-page patch.  */
-+#define OHW_R5KCVTL	0x8	/* R5000 cvt.[ds].l bug.  clean=1.  */
-+
-+#define OPAD_PREFIX	0x1
-+#define OPAD_POSTFIX	0x2
-+#define OPAD_SYMBOL	0x4
-+
-+/* Entry found in `.options' section.  */
-+
-+typedef struct
-+{
-+  Elf32_Word hwp_flags1;	/* Extra flags.  */
-+  Elf32_Word hwp_flags2;	/* Extra flags.  */
-+} Elf_Options_Hw;
-+
-+/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries.  */
-+
-+#define OHWA0_R4KEOP_CHECKED	0x00000001
-+#define OHWA1_R4KEOP_CLEAN	0x00000002
-+
-+/* MIPS relocs.  */
-+
-+#define R_MIPS_NONE		0	/* No reloc */
-+#define R_MIPS_16		1	/* Direct 16 bit */
-+#define R_MIPS_32		2	/* Direct 32 bit */
-+#define R_MIPS_REL32		3	/* PC relative 32 bit */
-+#define R_MIPS_26		4	/* Direct 26 bit shifted */
-+#define R_MIPS_HI16		5	/* High 16 bit */
-+#define R_MIPS_LO16		6	/* Low 16 bit */
-+#define R_MIPS_GPREL16		7	/* GP relative 16 bit */
-+#define R_MIPS_LITERAL		8	/* 16 bit literal entry */
-+#define R_MIPS_GOT16		9	/* 16 bit GOT entry */
-+#define R_MIPS_PC16		10	/* PC relative 16 bit */
-+#define R_MIPS_CALL16		11	/* 16 bit GOT entry for function */
-+#define R_MIPS_GPREL32		12	/* GP relative 32 bit */
-+
-+#define R_MIPS_SHIFT5		16
-+#define R_MIPS_SHIFT6		17
-+#define R_MIPS_64		18
-+#define R_MIPS_GOT_DISP		19
-+#define R_MIPS_GOT_PAGE		20
-+#define R_MIPS_GOT_OFST		21
-+#define R_MIPS_GOT_HI16		22
-+#define R_MIPS_GOT_LO16		23
-+#define R_MIPS_SUB		24
-+#define R_MIPS_INSERT_A		25
-+#define R_MIPS_INSERT_B		26
-+#define R_MIPS_DELETE		27
-+#define R_MIPS_HIGHER		28
-+#define R_MIPS_HIGHEST		29
-+#define R_MIPS_CALL_HI16	30
-+#define R_MIPS_CALL_LO16	31
-+#define R_MIPS_SCN_DISP		32
-+#define R_MIPS_REL16		33
-+#define R_MIPS_ADD_IMMEDIATE	34
-+#define R_MIPS_PJUMP		35
-+#define R_MIPS_RELGOT		36
-+#define R_MIPS_JALR		37
-+#define R_MIPS_TLS_DTPMOD32	38	/* Module number 32 bit */
-+#define R_MIPS_TLS_DTPREL32	39	/* Module-relative offset 32 bit */
-+#define R_MIPS_TLS_DTPMOD64	40	/* Module number 64 bit */
-+#define R_MIPS_TLS_DTPREL64	41	/* Module-relative offset 64 bit */
-+#define R_MIPS_TLS_GD		42	/* 16 bit GOT offset for GD */
-+#define R_MIPS_TLS_LDM		43	/* 16 bit GOT offset for LDM */
-+#define R_MIPS_TLS_DTPREL_HI16	44	/* Module-relative offset, high 16 bits */
-+#define R_MIPS_TLS_DTPREL_LO16	45	/* Module-relative offset, low 16 bits */
-+#define R_MIPS_TLS_GOTTPREL	46	/* 16 bit GOT offset for IE */
-+#define R_MIPS_TLS_TPREL32	47	/* TP-relative offset, 32 bit */
-+#define R_MIPS_TLS_TPREL64	48	/* TP-relative offset, 64 bit */
-+#define R_MIPS_TLS_TPREL_HI16	49	/* TP-relative offset, high 16 bits */
-+#define R_MIPS_TLS_TPREL_LO16	50	/* TP-relative offset, low 16 bits */
-+#define R_MIPS_GLOB_DAT		51
-+#define R_MIPS_COPY		126
-+#define R_MIPS_JUMP_SLOT        127
-+/* Keep this the last entry.  */
-+#define R_MIPS_NUM		128
-+
-+/* Legal values for p_type field of Elf32_Phdr.  */
-+
-+#define PT_MIPS_REGINFO	0x70000000	/* Register usage information */
-+#define PT_MIPS_RTPROC  0x70000001	/* Runtime procedure table. */
-+#define PT_MIPS_OPTIONS 0x70000002
-+
-+/* Special program header types.  */
-+
-+#define PF_MIPS_LOCAL	0x10000000
-+
-+/* Legal values for d_tag field of Elf32_Dyn.  */
-+
-+#define DT_MIPS_RLD_VERSION  0x70000001	/* Runtime linker interface version */
-+#define DT_MIPS_TIME_STAMP   0x70000002	/* Timestamp */
-+#define DT_MIPS_ICHECKSUM    0x70000003	/* Checksum */
-+#define DT_MIPS_IVERSION     0x70000004	/* Version string (string tbl index) */
-+#define DT_MIPS_FLAGS	     0x70000005	/* Flags */
-+#define DT_MIPS_BASE_ADDRESS 0x70000006	/* Base address */
-+#define DT_MIPS_MSYM	     0x70000007
-+#define DT_MIPS_CONFLICT     0x70000008	/* Address of CONFLICT section */
-+#define DT_MIPS_LIBLIST	     0x70000009	/* Address of LIBLIST section */
-+#define DT_MIPS_LOCAL_GOTNO  0x7000000a	/* Number of local GOT entries */
-+#define DT_MIPS_CONFLICTNO   0x7000000b	/* Number of CONFLICT entries */
-+#define DT_MIPS_LIBLISTNO    0x70000010	/* Number of LIBLIST entries */
-+#define DT_MIPS_SYMTABNO     0x70000011	/* Number of DYNSYM entries */
-+#define DT_MIPS_UNREFEXTNO   0x70000012	/* First external DYNSYM */
-+#define DT_MIPS_GOTSYM	     0x70000013	/* First GOT entry in DYNSYM */
-+#define DT_MIPS_HIPAGENO     0x70000014	/* Number of GOT page table entries */
-+#define DT_MIPS_RLD_MAP	     0x70000016	/* Address of run time loader map.  */
-+#define DT_MIPS_DELTA_CLASS  0x70000017	/* Delta C++ class definition.  */
-+#define DT_MIPS_DELTA_CLASS_NO    0x70000018 /* Number of entries in
-+						DT_MIPS_DELTA_CLASS.  */
-+#define DT_MIPS_DELTA_INSTANCE    0x70000019 /* Delta C++ class instances.  */
-+#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in
-+						DT_MIPS_DELTA_INSTANCE.  */
-+#define DT_MIPS_DELTA_RELOC  0x7000001b /* Delta relocations.  */
-+#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in
-+					     DT_MIPS_DELTA_RELOC.  */
-+#define DT_MIPS_DELTA_SYM    0x7000001d /* Delta symbols that Delta
-+					   relocations refer to.  */
-+#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in
-+					   DT_MIPS_DELTA_SYM.  */
-+#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the
-+					     class declaration.  */
-+#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in
-+						DT_MIPS_DELTA_CLASSSYM.  */
-+#define DT_MIPS_CXX_FLAGS    0x70000022 /* Flags indicating for C++ flavor.  */
-+#define DT_MIPS_PIXIE_INIT   0x70000023
-+#define DT_MIPS_SYMBOL_LIB   0x70000024
-+#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
-+#define DT_MIPS_LOCAL_GOTIDX 0x70000026
-+#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
-+#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
-+#define DT_MIPS_OPTIONS	     0x70000029 /* Address of .options.  */
-+#define DT_MIPS_INTERFACE    0x7000002a /* Address of .interface.  */
-+#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
-+#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */
-+#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve
-+						    function stored in GOT.  */
-+#define DT_MIPS_PERF_SUFFIX  0x7000002e /* Default suffix of dso to be added
-+					   by rld on dlopen() calls.  */
-+#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */
-+#define DT_MIPS_GP_VALUE     0x70000030 /* GP value for aux GOTs.  */
-+#define DT_MIPS_AUX_DYNAMIC  0x70000031 /* Address of aux .dynamic.  */
-+/* The address of .got.plt in an executable using the new non-PIC ABI.  */
-+#define DT_MIPS_PLTGOT	     0x70000032
-+/* The base of the PLT in an executable using the new non-PIC ABI if that
-+   PLT is writable.  For a non-writable PLT, this is omitted or has a zero
-+   value.  */
-+#define DT_MIPS_RWPLT        0x70000034
-+#define DT_MIPS_NUM	     0x35
-+
-+/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry.  */
-+
-+#define RHF_NONE		   0		/* No flags */
-+#define RHF_QUICKSTART		   (1 << 0)	/* Use quickstart */
-+#define RHF_NOTPOT		   (1 << 1)	/* Hash size not power of 2 */
-+#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2)	/* Ignore LD_LIBRARY_PATH */
-+#define RHF_NO_MOVE		   (1 << 3)
-+#define RHF_SGI_ONLY		   (1 << 4)
-+#define RHF_GUARANTEE_INIT	   (1 << 5)
-+#define RHF_DELTA_C_PLUS_PLUS	   (1 << 6)
-+#define RHF_GUARANTEE_START_INIT   (1 << 7)
-+#define RHF_PIXIE		   (1 << 8)
-+#define RHF_DEFAULT_DELAY_LOAD	   (1 << 9)
-+#define RHF_REQUICKSTART	   (1 << 10)
-+#define RHF_REQUICKSTARTED	   (1 << 11)
-+#define RHF_CORD		   (1 << 12)
-+#define RHF_NO_UNRES_UNDEF	   (1 << 13)
-+#define RHF_RLD_ORDER_SAFE	   (1 << 14)
-+
-+/* Entries found in sections of type SHT_MIPS_LIBLIST.  */
-+
-+typedef struct
-+{
-+  Elf32_Word l_name;		/* Name (string table index) */
-+  Elf32_Word l_time_stamp;	/* Timestamp */
-+  Elf32_Word l_checksum;	/* Checksum */
-+  Elf32_Word l_version;		/* Interface version */
-+  Elf32_Word l_flags;		/* Flags */
-+} Elf32_Lib;
-+
-+typedef struct
-+{
-+  Elf64_Word l_name;		/* Name (string table index) */
-+  Elf64_Word l_time_stamp;	/* Timestamp */
-+  Elf64_Word l_checksum;	/* Checksum */
-+  Elf64_Word l_version;		/* Interface version */
-+  Elf64_Word l_flags;		/* Flags */
-+} Elf64_Lib;
-+
-+
-+/* Legal values for l_flags.  */
-+
-+#define LL_NONE		  0
-+#define LL_EXACT_MATCH	  (1 << 0)	/* Require exact match */
-+#define LL_IGNORE_INT_VER (1 << 1)	/* Ignore interface version */
-+#define LL_REQUIRE_MINOR  (1 << 2)
-+#define LL_EXPORTS	  (1 << 3)
-+#define LL_DELAY_LOAD	  (1 << 4)
-+#define LL_DELTA	  (1 << 5)
-+
-+/* Entries found in sections of type SHT_MIPS_CONFLICT.  */
-+
-+typedef Elf32_Addr Elf32_Conflict;
-+
-+
-+/* HPPA specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr.  */
-+
-+#define EF_PARISC_TRAPNIL	0x00010000 /* Trap nil pointer dereference.  */
-+#define EF_PARISC_EXT		0x00020000 /* Program uses arch. extensions. */
-+#define EF_PARISC_LSB		0x00040000 /* Program expects little endian. */
-+#define EF_PARISC_WIDE		0x00080000 /* Program expects wide mode.  */
-+#define EF_PARISC_NO_KABP	0x00100000 /* No kernel assisted branch
-+					      prediction.  */
-+#define EF_PARISC_LAZYSWAP	0x00400000 /* Allow lazy swapping.  */
-+#define EF_PARISC_ARCH		0x0000ffff /* Architecture version.  */
-+
-+/* Defined values for `e_flags & EF_PARISC_ARCH' are:  */
-+
-+#define EFA_PARISC_1_0		    0x020b /* PA-RISC 1.0 big-endian.  */
-+#define EFA_PARISC_1_1		    0x0210 /* PA-RISC 1.1 big-endian.  */
-+#define EFA_PARISC_2_0		    0x0214 /* PA-RISC 2.0 big-endian.  */
-+
-+/* Additional section indeces.  */
-+
-+#define SHN_PARISC_ANSI_COMMON	0xff00	   /* Section for tenatively declared
-+					      symbols in ANSI C.  */
-+#define SHN_PARISC_HUGE_COMMON	0xff01	   /* Common blocks in huge model.  */
-+
-+/* Legal values for sh_type field of Elf32_Shdr.  */
-+
-+#define SHT_PARISC_EXT		0x70000000 /* Contains product specific ext. */
-+#define SHT_PARISC_UNWIND	0x70000001 /* Unwind information.  */
-+#define SHT_PARISC_DOC		0x70000002 /* Debug info for optimized code. */
-+
-+/* Legal values for sh_flags field of Elf32_Shdr.  */
-+
-+#define SHF_PARISC_SHORT	0x20000000 /* Section with short addressing. */
-+#define SHF_PARISC_HUGE		0x40000000 /* Section far from gp.  */
-+#define SHF_PARISC_SBP		0x80000000 /* Static branch prediction code. */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_PARISC_MILLICODE	13	/* Millicode function entry point.  */
-+
-+#define STT_HP_OPAQUE		(STT_LOOS + 0x1)
-+#define STT_HP_STUB		(STT_LOOS + 0x2)
-+
-+/* HPPA relocs.  */
-+
-+#define R_PARISC_NONE		0	/* No reloc.  */
-+#define R_PARISC_DIR32		1	/* Direct 32-bit reference.  */
-+#define R_PARISC_DIR21L		2	/* Left 21 bits of eff. address.  */
-+#define R_PARISC_DIR17R		3	/* Right 17 bits of eff. address.  */
-+#define R_PARISC_DIR17F		4	/* 17 bits of eff. address.  */
-+#define R_PARISC_DIR14R		6	/* Right 14 bits of eff. address.  */
-+#define R_PARISC_PCREL32	9	/* 32-bit rel. address.  */
-+#define R_PARISC_PCREL21L	10	/* Left 21 bits of rel. address.  */
-+#define R_PARISC_PCREL17R	11	/* Right 17 bits of rel. address.  */
-+#define R_PARISC_PCREL17F	12	/* 17 bits of rel. address.  */
-+#define R_PARISC_PCREL14R	14	/* Right 14 bits of rel. address.  */
-+#define R_PARISC_DPREL21L	18	/* Left 21 bits of rel. address.  */
-+#define R_PARISC_DPREL14R	22	/* Right 14 bits of rel. address.  */
-+#define R_PARISC_GPREL21L	26	/* GP-relative, left 21 bits.  */
-+#define R_PARISC_GPREL14R	30	/* GP-relative, right 14 bits.  */
-+#define R_PARISC_LTOFF21L	34	/* LT-relative, left 21 bits.  */
-+#define R_PARISC_LTOFF14R	38	/* LT-relative, right 14 bits.  */
-+#define R_PARISC_SECREL32	41	/* 32 bits section rel. address.  */
-+#define R_PARISC_SEGBASE	48	/* No relocation, set segment base.  */
-+#define R_PARISC_SEGREL32	49	/* 32 bits segment rel. address.  */
-+#define R_PARISC_PLTOFF21L	50	/* PLT rel. address, left 21 bits.  */
-+#define R_PARISC_PLTOFF14R	54	/* PLT rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF_FPTR32	57	/* 32 bits LT-rel. function pointer. */
-+#define R_PARISC_LTOFF_FPTR21L	58	/* LT-rel. fct ptr, left 21 bits. */
-+#define R_PARISC_LTOFF_FPTR14R	62	/* LT-rel. fct ptr, right 14 bits. */
-+#define R_PARISC_FPTR64		64	/* 64 bits function address.  */
-+#define R_PARISC_PLABEL32	65	/* 32 bits function address.  */
-+#define R_PARISC_PLABEL21L	66	/* Left 21 bits of fdesc address.  */
-+#define R_PARISC_PLABEL14R	70	/* Right 14 bits of fdesc address.  */
-+#define R_PARISC_PCREL64	72	/* 64 bits PC-rel. address.  */
-+#define R_PARISC_PCREL22F	74	/* 22 bits PC-rel. address.  */
-+#define R_PARISC_PCREL14WR	75	/* PC-rel. address, right 14 bits.  */
-+#define R_PARISC_PCREL14DR	76	/* PC rel. address, right 14 bits.  */
-+#define R_PARISC_PCREL16F	77	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_PCREL16WF	78	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_PCREL16DF	79	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_DIR64		80	/* 64 bits of eff. address.  */
-+#define R_PARISC_DIR14WR	83	/* 14 bits of eff. address.  */
-+#define R_PARISC_DIR14DR	84	/* 14 bits of eff. address.  */
-+#define R_PARISC_DIR16F		85	/* 16 bits of eff. address.  */
-+#define R_PARISC_DIR16WF	86	/* 16 bits of eff. address.  */
-+#define R_PARISC_DIR16DF	87	/* 16 bits of eff. address.  */
-+#define R_PARISC_GPREL64	88	/* 64 bits of GP-rel. address.  */
-+#define R_PARISC_GPREL14WR	91	/* GP-rel. address, right 14 bits.  */
-+#define R_PARISC_GPREL14DR	92	/* GP-rel. address, right 14 bits.  */
-+#define R_PARISC_GPREL16F	93	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_GPREL16WF	94	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_GPREL16DF	95	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_LTOFF64	96	/* 64 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF14WR	99	/* LT-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF14DR	100	/* LT-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF16F	101	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF16WF	102	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF16DF	103	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_SECREL64	104	/* 64 bits section rel. address.  */
-+#define R_PARISC_SEGREL64	112	/* 64 bits segment rel. address.  */
-+#define R_PARISC_PLTOFF14WR	115	/* PLT-rel. address, right 14 bits.  */
-+#define R_PARISC_PLTOFF14DR	116	/* PLT-rel. address, right 14 bits.  */
-+#define R_PARISC_PLTOFF16F	117	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_PLTOFF16WF	118	/* 16 bits PLT-rel. address.  */
-+#define R_PARISC_PLTOFF16DF	119	/* 16 bits PLT-rel. address.  */
-+#define R_PARISC_LTOFF_FPTR64	120	/* 64 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR14WR	123	/* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR14DR	124	/* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR16F	125	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR16WF	126	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR16DF	127	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LORESERVE	128
-+#define R_PARISC_COPY		128	/* Copy relocation.  */
-+#define R_PARISC_IPLT		129	/* Dynamic reloc, imported PLT */
-+#define R_PARISC_EPLT		130	/* Dynamic reloc, exported PLT */
-+#define R_PARISC_TPREL32	153	/* 32 bits TP-rel. address.  */
-+#define R_PARISC_TPREL21L	154	/* TP-rel. address, left 21 bits.  */
-+#define R_PARISC_TPREL14R	158	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF_TP21L	162	/* LT-TP-rel. address, left 21 bits. */
-+#define R_PARISC_LTOFF_TP14R	166	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14F	167	/* 14 bits LT-TP-rel. address.  */
-+#define R_PARISC_TPREL64	216	/* 64 bits TP-rel. address.  */
-+#define R_PARISC_TPREL14WR	219	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_TPREL14DR	220	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_TPREL16F	221	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_TPREL16WF	222	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_TPREL16DF	223	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP64	224	/* 64 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP14WR	227	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14DR	228	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP16F	229	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP16WF	230	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP16DF	231	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_GNU_VTENTRY	232
-+#define R_PARISC_GNU_VTINHERIT	233
-+#define R_PARISC_TLS_GD21L	234	/* GD 21-bit left.  */
-+#define R_PARISC_TLS_GD14R	235	/* GD 14-bit right.  */
-+#define R_PARISC_TLS_GDCALL	236	/* GD call to __t_g_a.  */
-+#define R_PARISC_TLS_LDM21L	237	/* LD module 21-bit left.  */
-+#define R_PARISC_TLS_LDM14R	238	/* LD module 14-bit right.  */
-+#define R_PARISC_TLS_LDMCALL	239	/* LD module call to __t_g_a.  */
-+#define R_PARISC_TLS_LDO21L	240	/* LD offset 21-bit left.  */
-+#define R_PARISC_TLS_LDO14R	241	/* LD offset 14-bit right.  */
-+#define R_PARISC_TLS_DTPMOD32	242	/* DTP module 32-bit.  */
-+#define R_PARISC_TLS_DTPMOD64	243	/* DTP module 64-bit.  */
-+#define R_PARISC_TLS_DTPOFF32	244	/* DTP offset 32-bit.  */
-+#define R_PARISC_TLS_DTPOFF64	245	/* DTP offset 32-bit.  */
-+#define R_PARISC_TLS_LE21L	R_PARISC_TPREL21L
-+#define R_PARISC_TLS_LE14R	R_PARISC_TPREL14R
-+#define R_PARISC_TLS_IE21L	R_PARISC_LTOFF_TP21L
-+#define R_PARISC_TLS_IE14R	R_PARISC_LTOFF_TP14R
-+#define R_PARISC_TLS_TPREL32	R_PARISC_TPREL32
-+#define R_PARISC_TLS_TPREL64	R_PARISC_TPREL64
-+#define R_PARISC_HIRESERVE	255
-+
-+/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr.  */
-+
-+#define PT_HP_TLS		(PT_LOOS + 0x0)
-+#define PT_HP_CORE_NONE		(PT_LOOS + 0x1)
-+#define PT_HP_CORE_VERSION	(PT_LOOS + 0x2)
-+#define PT_HP_CORE_KERNEL	(PT_LOOS + 0x3)
-+#define PT_HP_CORE_COMM		(PT_LOOS + 0x4)
-+#define PT_HP_CORE_PROC		(PT_LOOS + 0x5)
-+#define PT_HP_CORE_LOADABLE	(PT_LOOS + 0x6)
-+#define PT_HP_CORE_STACK	(PT_LOOS + 0x7)
-+#define PT_HP_CORE_SHM		(PT_LOOS + 0x8)
-+#define PT_HP_CORE_MMF		(PT_LOOS + 0x9)
-+#define PT_HP_PARALLEL		(PT_LOOS + 0x10)
-+#define PT_HP_FASTBIND		(PT_LOOS + 0x11)
-+#define PT_HP_OPT_ANNOT		(PT_LOOS + 0x12)
-+#define PT_HP_HSL_ANNOT		(PT_LOOS + 0x13)
-+#define PT_HP_STACK		(PT_LOOS + 0x14)
-+
-+#define PT_PARISC_ARCHEXT	0x70000000
-+#define PT_PARISC_UNWIND	0x70000001
-+
-+/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr.  */
-+
-+#define PF_PARISC_SBP		0x08000000
-+
-+#define PF_HP_PAGE_SIZE		0x00100000
-+#define PF_HP_FAR_SHARED	0x00200000
-+#define PF_HP_NEAR_SHARED	0x00400000
-+#define PF_HP_CODE		0x01000000
-+#define PF_HP_MODIFY		0x02000000
-+#define PF_HP_LAZYSWAP		0x04000000
-+#define PF_HP_SBP		0x08000000
-+
-+
-+/* Alpha specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf64_Ehdr.  */
-+
-+#define EF_ALPHA_32BIT		1	/* All addresses must be < 2GB.  */
-+#define EF_ALPHA_CANRELAX	2	/* Relocations for relaxing exist.  */
-+
-+/* Legal values for sh_type field of Elf64_Shdr.  */
-+
-+/* These two are primerily concerned with ECOFF debugging info.  */
-+#define SHT_ALPHA_DEBUG		0x70000001
-+#define SHT_ALPHA_REGINFO	0x70000002
-+
-+/* Legal values for sh_flags field of Elf64_Shdr.  */
-+
-+#define SHF_ALPHA_GPREL		0x10000000
-+
-+/* Legal values for st_other field of Elf64_Sym.  */
-+#define STO_ALPHA_NOPV		0x80	/* No PV required.  */
-+#define STO_ALPHA_STD_GPLOAD	0x88	/* PV only used for initial ldgp.  */
-+
-+/* Alpha relocs.  */
-+
-+#define R_ALPHA_NONE		0	/* No reloc */
-+#define R_ALPHA_REFLONG		1	/* Direct 32 bit */
-+#define R_ALPHA_REFQUAD		2	/* Direct 64 bit */
-+#define R_ALPHA_GPREL32		3	/* GP relative 32 bit */
-+#define R_ALPHA_LITERAL		4	/* GP relative 16 bit w/optimization */
-+#define R_ALPHA_LITUSE		5	/* Optimization hint for LITERAL */
-+#define R_ALPHA_GPDISP		6	/* Add displacement to GP */
-+#define R_ALPHA_BRADDR		7	/* PC+4 relative 23 bit shifted */
-+#define R_ALPHA_HINT		8	/* PC+4 relative 16 bit shifted */
-+#define R_ALPHA_SREL16		9	/* PC relative 16 bit */
-+#define R_ALPHA_SREL32		10	/* PC relative 32 bit */
-+#define R_ALPHA_SREL64		11	/* PC relative 64 bit */
-+#define R_ALPHA_GPRELHIGH	17	/* GP relative 32 bit, high 16 bits */
-+#define R_ALPHA_GPRELLOW	18	/* GP relative 32 bit, low 16 bits */
-+#define R_ALPHA_GPREL16		19	/* GP relative 16 bit */
-+#define R_ALPHA_COPY		24	/* Copy symbol at runtime */
-+#define R_ALPHA_GLOB_DAT	25	/* Create GOT entry */
-+#define R_ALPHA_JMP_SLOT	26	/* Create PLT entry */
-+#define R_ALPHA_RELATIVE	27	/* Adjust by program base */
-+#define R_ALPHA_TLS_GD_HI	28
-+#define R_ALPHA_TLSGD		29
-+#define R_ALPHA_TLS_LDM		30
-+#define R_ALPHA_DTPMOD64	31
-+#define R_ALPHA_GOTDTPREL	32
-+#define R_ALPHA_DTPREL64	33
-+#define R_ALPHA_DTPRELHI	34
-+#define R_ALPHA_DTPRELLO	35
-+#define R_ALPHA_DTPREL16	36
-+#define R_ALPHA_GOTTPREL	37
-+#define R_ALPHA_TPREL64		38
-+#define R_ALPHA_TPRELHI		39
-+#define R_ALPHA_TPRELLO		40
-+#define R_ALPHA_TPREL16		41
-+/* Keep this the last entry.  */
-+#define R_ALPHA_NUM		46
-+
-+/* Magic values of the LITUSE relocation addend.  */
-+#define LITUSE_ALPHA_ADDR	0
-+#define LITUSE_ALPHA_BASE	1
-+#define LITUSE_ALPHA_BYTOFF	2
-+#define LITUSE_ALPHA_JSR	3
-+#define LITUSE_ALPHA_TLS_GD	4
-+#define LITUSE_ALPHA_TLS_LDM	5
-+
-+/* Legal values for d_tag of Elf64_Dyn.  */
-+#define DT_ALPHA_PLTRO		(DT_LOPROC + 0)
-+#define DT_ALPHA_NUM		1
-+
-+/* PowerPC specific declarations */
-+
-+/* Values for Elf32/64_Ehdr.e_flags.  */
-+#define EF_PPC_EMB		0x80000000	/* PowerPC embedded flag */
-+
-+/* Cygnus local bits below */
-+#define EF_PPC_RELOCATABLE	0x00010000	/* PowerPC -mrelocatable flag*/
-+#define EF_PPC_RELOCATABLE_LIB	0x00008000	/* PowerPC -mrelocatable-lib
-+						   flag */
-+
-+/* PowerPC relocations defined by the ABIs */
-+#define R_PPC_NONE		0
-+#define R_PPC_ADDR32		1	/* 32bit absolute address */
-+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
-+#define R_PPC_ADDR16		3	/* 16bit absolute address */
-+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
-+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
-+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
-+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
-+#define R_PPC_ADDR14_BRTAKEN	8
-+#define R_PPC_ADDR14_BRNTAKEN	9
-+#define R_PPC_REL24		10	/* PC relative 26 bit */
-+#define R_PPC_REL14		11	/* PC relative 16 bit */
-+#define R_PPC_REL14_BRTAKEN	12
-+#define R_PPC_REL14_BRNTAKEN	13
-+#define R_PPC_GOT16		14
-+#define R_PPC_GOT16_LO		15
-+#define R_PPC_GOT16_HI		16
-+#define R_PPC_GOT16_HA		17
-+#define R_PPC_PLTREL24		18
-+#define R_PPC_COPY		19
-+#define R_PPC_GLOB_DAT		20
-+#define R_PPC_JMP_SLOT		21
-+#define R_PPC_RELATIVE		22
-+#define R_PPC_LOCAL24PC		23
-+#define R_PPC_UADDR32		24
-+#define R_PPC_UADDR16		25
-+#define R_PPC_REL32		26
-+#define R_PPC_PLT32		27
-+#define R_PPC_PLTREL32		28
-+#define R_PPC_PLT16_LO		29
-+#define R_PPC_PLT16_HI		30
-+#define R_PPC_PLT16_HA		31
-+#define R_PPC_SDAREL16		32
-+#define R_PPC_SECTOFF		33
-+#define R_PPC_SECTOFF_LO	34
-+#define R_PPC_SECTOFF_HI	35
-+#define R_PPC_SECTOFF_HA	36
-+
-+/* PowerPC relocations defined for the TLS access ABI.  */
-+#define R_PPC_TLS		67 /* none	(sym+add)@tls */
-+#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
-+#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
-+#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-+#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-+#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-+#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
-+#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
-+#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-+#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-+#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-+#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
-+#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-+#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-+#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-+#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-+#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-+#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-+#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-+#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-+#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
-+#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
-+#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-+#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-+#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
-+#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
-+#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
-+#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
-+
-+/* The remaining relocs are from the Embedded ELF ABI, and are not
-+   in the SVR4 ELF ABI.  */
-+#define R_PPC_EMB_NADDR32	101
-+#define R_PPC_EMB_NADDR16	102
-+#define R_PPC_EMB_NADDR16_LO	103
-+#define R_PPC_EMB_NADDR16_HI	104
-+#define R_PPC_EMB_NADDR16_HA	105
-+#define R_PPC_EMB_SDAI16	106
-+#define R_PPC_EMB_SDA2I16	107
-+#define R_PPC_EMB_SDA2REL	108
-+#define R_PPC_EMB_SDA21		109	/* 16 bit offset in SDA */
-+#define R_PPC_EMB_MRKREF	110
-+#define R_PPC_EMB_RELSEC16	111
-+#define R_PPC_EMB_RELST_LO	112
-+#define R_PPC_EMB_RELST_HI	113
-+#define R_PPC_EMB_RELST_HA	114
-+#define R_PPC_EMB_BIT_FLD	115
-+#define R_PPC_EMB_RELSDA	116	/* 16 bit relative offset in SDA */
-+
-+/* Diab tool relocations.  */
-+#define R_PPC_DIAB_SDA21_LO	180	/* like EMB_SDA21, but lower 16 bit */
-+#define R_PPC_DIAB_SDA21_HI	181	/* like EMB_SDA21, but high 16 bit */
-+#define R_PPC_DIAB_SDA21_HA	182	/* like EMB_SDA21, adjusted high 16 */
-+#define R_PPC_DIAB_RELSDA_LO	183	/* like EMB_RELSDA, but lower 16 bit */
-+#define R_PPC_DIAB_RELSDA_HI	184	/* like EMB_RELSDA, but high 16 bit */
-+#define R_PPC_DIAB_RELSDA_HA	185	/* like EMB_RELSDA, adjusted high 16 */
-+
-+/* GNU extension to support local ifunc.  */
-+#define R_PPC_IRELATIVE		248
-+
-+/* GNU relocs used in PIC code sequences.  */
-+#define R_PPC_REL16		249	/* half16   (sym+add-.) */
-+#define R_PPC_REL16_LO		250	/* half16   (sym+add-.)@l */
-+#define R_PPC_REL16_HI		251	/* half16   (sym+add-.)@h */
-+#define R_PPC_REL16_HA		252	/* half16   (sym+add-.)@ha */
-+
-+/* This is a phony reloc to handle any old fashioned TOC16 references
-+   that may still be in object files.  */
-+#define R_PPC_TOC16		255
-+
-+/* PowerPC specific values for the Dyn d_tag field.  */
-+#define DT_PPC_GOT		(DT_LOPROC + 0)
-+#define DT_PPC_NUM		1
-+
-+/* PowerPC64 relocations defined by the ABIs */
-+#define R_PPC64_NONE		R_PPC_NONE
-+#define R_PPC64_ADDR32		R_PPC_ADDR32 /* 32bit absolute address */
-+#define R_PPC64_ADDR24		R_PPC_ADDR24 /* 26bit address, word aligned */
-+#define R_PPC64_ADDR16		R_PPC_ADDR16 /* 16bit absolute address */
-+#define R_PPC64_ADDR16_LO	R_PPC_ADDR16_LO	/* lower 16bits of address */
-+#define R_PPC64_ADDR16_HI	R_PPC_ADDR16_HI	/* high 16bits of address. */
-+#define R_PPC64_ADDR16_HA	R_PPC_ADDR16_HA /* adjusted high 16bits.  */
-+#define R_PPC64_ADDR14		R_PPC_ADDR14 /* 16bit address, word aligned */
-+#define R_PPC64_ADDR14_BRTAKEN	R_PPC_ADDR14_BRTAKEN
-+#define R_PPC64_ADDR14_BRNTAKEN	R_PPC_ADDR14_BRNTAKEN
-+#define R_PPC64_REL24		R_PPC_REL24 /* PC-rel. 26 bit, word aligned */
-+#define R_PPC64_REL14		R_PPC_REL14 /* PC relative 16 bit */
-+#define R_PPC64_REL14_BRTAKEN	R_PPC_REL14_BRTAKEN
-+#define R_PPC64_REL14_BRNTAKEN	R_PPC_REL14_BRNTAKEN
-+#define R_PPC64_GOT16		R_PPC_GOT16
-+#define R_PPC64_GOT16_LO	R_PPC_GOT16_LO
-+#define R_PPC64_GOT16_HI	R_PPC_GOT16_HI
-+#define R_PPC64_GOT16_HA	R_PPC_GOT16_HA
-+
-+#define R_PPC64_COPY		R_PPC_COPY
-+#define R_PPC64_GLOB_DAT	R_PPC_GLOB_DAT
-+#define R_PPC64_JMP_SLOT	R_PPC_JMP_SLOT
-+#define R_PPC64_RELATIVE	R_PPC_RELATIVE
-+
-+#define R_PPC64_UADDR32		R_PPC_UADDR32
-+#define R_PPC64_UADDR16		R_PPC_UADDR16
-+#define R_PPC64_REL32		R_PPC_REL32
-+#define R_PPC64_PLT32		R_PPC_PLT32
-+#define R_PPC64_PLTREL32	R_PPC_PLTREL32
-+#define R_PPC64_PLT16_LO	R_PPC_PLT16_LO
-+#define R_PPC64_PLT16_HI	R_PPC_PLT16_HI
-+#define R_PPC64_PLT16_HA	R_PPC_PLT16_HA
-+
-+#define R_PPC64_SECTOFF		R_PPC_SECTOFF
-+#define R_PPC64_SECTOFF_LO	R_PPC_SECTOFF_LO
-+#define R_PPC64_SECTOFF_HI	R_PPC_SECTOFF_HI
-+#define R_PPC64_SECTOFF_HA	R_PPC_SECTOFF_HA
-+#define R_PPC64_ADDR30		37 /* word30 (S + A - P) >> 2 */
-+#define R_PPC64_ADDR64		38 /* doubleword64 S + A */
-+#define R_PPC64_ADDR16_HIGHER	39 /* half16 #higher(S + A) */
-+#define R_PPC64_ADDR16_HIGHERA	40 /* half16 #highera(S + A) */
-+#define R_PPC64_ADDR16_HIGHEST	41 /* half16 #highest(S + A) */
-+#define R_PPC64_ADDR16_HIGHESTA	42 /* half16 #highesta(S + A) */
-+#define R_PPC64_UADDR64		43 /* doubleword64 S + A */
-+#define R_PPC64_REL64		44 /* doubleword64 S + A - P */
-+#define R_PPC64_PLT64		45 /* doubleword64 L + A */
-+#define R_PPC64_PLTREL64	46 /* doubleword64 L + A - P */
-+#define R_PPC64_TOC16		47 /* half16* S + A - .TOC */
-+#define R_PPC64_TOC16_LO	48 /* half16 #lo(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HI	49 /* half16 #hi(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HA	50 /* half16 #ha(S + A - .TOC.) */
-+#define R_PPC64_TOC		51 /* doubleword64 .TOC */
-+#define R_PPC64_PLTGOT16	52 /* half16* M + A */
-+#define R_PPC64_PLTGOT16_LO	53 /* half16 #lo(M + A) */
-+#define R_PPC64_PLTGOT16_HI	54 /* half16 #hi(M + A) */
-+#define R_PPC64_PLTGOT16_HA	55 /* half16 #ha(M + A) */
-+
-+#define R_PPC64_ADDR16_DS	56 /* half16ds* (S + A) >> 2 */
-+#define R_PPC64_ADDR16_LO_DS	57 /* half16ds  #lo(S + A) >> 2 */
-+#define R_PPC64_GOT16_DS	58 /* half16ds* (G + A) >> 2 */
-+#define R_PPC64_GOT16_LO_DS	59 /* half16ds  #lo(G + A) >> 2 */
-+#define R_PPC64_PLT16_LO_DS	60 /* half16ds  #lo(L + A) >> 2 */
-+#define R_PPC64_SECTOFF_DS	61 /* half16ds* (R + A) >> 2 */
-+#define R_PPC64_SECTOFF_LO_DS	62 /* half16ds  #lo(R + A) >> 2 */
-+#define R_PPC64_TOC16_DS	63 /* half16ds* (S + A - .TOC.) >> 2 */
-+#define R_PPC64_TOC16_LO_DS	64 /* half16ds  #lo(S + A - .TOC.) >> 2 */
-+#define R_PPC64_PLTGOT16_DS	65 /* half16ds* (M + A) >> 2 */
-+#define R_PPC64_PLTGOT16_LO_DS	66 /* half16ds  #lo(M + A) >> 2 */
-+
-+/* PowerPC64 relocations defined for the TLS access ABI.  */
-+#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
-+#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
-+#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-+#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-+#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
-+#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-+#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-+#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
-+#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-+#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-+#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-+#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-+#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-+#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-+#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-+#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-+#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
-+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
-+#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-+#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-+#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
-+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
-+#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
-+#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
-+#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
-+#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
-+#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
-+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
-+#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
-+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
-+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
-+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
-+
-+/* GNU extension to support local ifunc.  */
-+#define R_PPC64_JMP_IREL	247
-+#define R_PPC64_IRELATIVE	248
-+#define R_PPC64_REL16		249	/* half16   (sym+add-.) */
-+#define R_PPC64_REL16_LO	250	/* half16   (sym+add-.)@l */
-+#define R_PPC64_REL16_HI	251	/* half16   (sym+add-.)@h */
-+#define R_PPC64_REL16_HA	252	/* half16   (sym+add-.)@ha */
-+
-+/* PowerPC64 specific values for the Dyn d_tag field.  */
-+#define DT_PPC64_GLINK  (DT_LOPROC + 0)
-+#define DT_PPC64_OPD	(DT_LOPROC + 1)
-+#define DT_PPC64_OPDSZ	(DT_LOPROC + 2)
-+#define DT_PPC64_NUM    3
-+
-+
-+/* ARM specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field.  */
-+#define EF_ARM_RELEXEC		0x01
-+#define EF_ARM_HASENTRY		0x02
-+#define EF_ARM_INTERWORK	0x04
-+#define EF_ARM_APCS_26		0x08
-+#define EF_ARM_APCS_FLOAT	0x10
-+#define EF_ARM_PIC		0x20
-+#define EF_ARM_ALIGN8		0x40 /* 8-bit structure alignment is in use */
-+#define EF_ARM_NEW_ABI		0x80
-+#define EF_ARM_OLD_ABI		0x100
-+#define EF_ARM_SOFT_FLOAT	0x200
-+#define EF_ARM_VFP_FLOAT	0x400
-+#define EF_ARM_MAVERICK_FLOAT	0x800
-+
-+
-+/* Other constants defined in the ARM ELF spec. version B-01.  */
-+/* NB. These conflict with values defined above.  */
-+#define EF_ARM_SYMSARESORTED	0x04
-+#define EF_ARM_DYNSYMSUSESEGIDX	0x08
-+#define EF_ARM_MAPSYMSFIRST	0x10
-+#define EF_ARM_EABIMASK		0XFF000000
-+
-+/* Constants defined in AAELF.  */
-+#define EF_ARM_BE8	    0x00800000
-+#define EF_ARM_LE8	    0x00400000
-+
-+#define EF_ARM_EABI_VERSION(flags)	((flags) & EF_ARM_EABIMASK)
-+#define EF_ARM_EABI_UNKNOWN	0x00000000
-+#define EF_ARM_EABI_VER1	0x01000000
-+#define EF_ARM_EABI_VER2	0x02000000
-+#define EF_ARM_EABI_VER3	0x03000000
-+#define EF_ARM_EABI_VER4	0x04000000
-+#define EF_ARM_EABI_VER5	0x05000000
-+
-+/* Additional symbol types for Thumb.  */
-+#define STT_ARM_TFUNC		STT_LOPROC /* A Thumb function.  */
-+#define STT_ARM_16BIT		STT_HIPROC /* A Thumb label.  */
-+
-+/* ARM-specific values for sh_flags */
-+#define SHF_ARM_ENTRYSECT	0x10000000 /* Section contains an entry point */
-+#define SHF_ARM_COMDEF		0x80000000 /* Section may be multiply defined
-+					      in the input to a link step.  */
-+
-+/* ARM-specific program header flags */
-+#define PF_ARM_SB		0x10000000 /* Segment contains the location
-+					      addressed by the static base. */
-+#define PF_ARM_PI		0x20000000 /* Position-independent segment.  */
-+#define PF_ARM_ABS		0x40000000 /* Absolute segment.  */
-+
-+/* Processor specific values for the Phdr p_type field.  */
-+#define PT_ARM_EXIDX		(PT_LOPROC + 1)	/* ARM unwind segment.  */
-+
-+/* Processor specific values for the Shdr sh_type field.  */
-+#define SHT_ARM_EXIDX		(SHT_LOPROC + 1) /* ARM unwind section.  */
-+#define SHT_ARM_PREEMPTMAP	(SHT_LOPROC + 2) /* Preemption details.  */
-+#define SHT_ARM_ATTRIBUTES	(SHT_LOPROC + 3) /* ARM attributes section.  */
-+
-+
-+/* ARM relocs.  */
-+
-+#define R_ARM_NONE		0	/* No reloc */
-+#define R_ARM_PC24		1	/* PC relative 26 bit branch */
-+#define R_ARM_ABS32		2	/* Direct 32 bit  */
-+#define R_ARM_REL32		3	/* PC relative 32 bit */
-+#define R_ARM_PC13		4
-+#define R_ARM_ABS16		5	/* Direct 16 bit */
-+#define R_ARM_ABS12		6	/* Direct 12 bit */
-+#define R_ARM_THM_ABS5		7
-+#define R_ARM_ABS8		8	/* Direct 8 bit */
-+#define R_ARM_SBREL32		9
-+#define R_ARM_THM_PC22		10
-+#define R_ARM_THM_PC8		11
-+#define R_ARM_AMP_VCALL9	12
-+#define R_ARM_SWI24		13	/* Obsolete static relocation.  */
-+#define R_ARM_TLS_DESC		13      /* Dynamic relocation.  */
-+#define R_ARM_THM_SWI8		14
-+#define R_ARM_XPC25		15
-+#define R_ARM_THM_XPC22		16
-+#define R_ARM_TLS_DTPMOD32	17	/* ID of module containing symbol */
-+#define R_ARM_TLS_DTPOFF32	18	/* Offset in TLS block */
-+#define R_ARM_TLS_TPOFF32	19	/* Offset in static TLS block */
-+#define R_ARM_COPY		20	/* Copy symbol at runtime */
-+#define R_ARM_GLOB_DAT		21	/* Create GOT entry */
-+#define R_ARM_JUMP_SLOT		22	/* Create PLT entry */
-+#define R_ARM_RELATIVE		23	/* Adjust by program base */
-+#define R_ARM_GOTOFF		24	/* 32 bit offset to GOT */
-+#define R_ARM_GOTPC		25	/* 32 bit PC relative offset to GOT */
-+#define R_ARM_GOT32		26	/* 32 bit GOT entry */
-+#define R_ARM_PLT32		27	/* 32 bit PLT address */
-+#define R_ARM_ALU_PCREL_7_0	32
-+#define R_ARM_ALU_PCREL_15_8	33
-+#define R_ARM_ALU_PCREL_23_15	34
-+#define R_ARM_LDR_SBREL_11_0	35
-+#define R_ARM_ALU_SBREL_19_12	36
-+#define R_ARM_ALU_SBREL_27_20	37
-+#define R_ARM_TLS_GOTDESC	90
-+#define R_ARM_TLS_CALL		91
-+#define R_ARM_TLS_DESCSEQ	92
-+#define R_ARM_THM_TLS_CALL	93
-+#define R_ARM_GNU_VTENTRY	100
-+#define R_ARM_GNU_VTINHERIT	101
-+#define R_ARM_THM_PC11		102	/* thumb unconditional branch */
-+#define R_ARM_THM_PC9		103	/* thumb conditional branch */
-+#define R_ARM_TLS_GD32		104	/* PC-rel 32 bit for global dynamic
-+					   thread local data */
-+#define R_ARM_TLS_LDM32		105	/* PC-rel 32 bit for local dynamic
-+					   thread local data */
-+#define R_ARM_TLS_LDO32		106	/* 32 bit offset relative to TLS
-+					   block */
-+#define R_ARM_TLS_IE32		107	/* PC-rel 32 bit for GOT entry of
-+					   static TLS block offset */
-+#define R_ARM_TLS_LE32		108	/* 32 bit offset relative to static
-+					   TLS block */
-+#define	R_ARM_THM_TLS_DESCSEQ	129
-+#define R_ARM_IRELATIVE		160
-+#define R_ARM_RXPC25		249
-+#define R_ARM_RSBREL32		250
-+#define R_ARM_THM_RPC22		251
-+#define R_ARM_RREL32		252
-+#define R_ARM_RABS22		253
-+#define R_ARM_RPC24		254
-+#define R_ARM_RBASE		255
-+/* Keep this the last entry.  */
-+#define R_ARM_NUM		256
-+
-+/* IA-64 specific declarations.  */
-+
-+/* Processor specific flags for the Ehdr e_flags field.  */
-+#define EF_IA_64_MASKOS		0x0000000f	/* os-specific flags */
-+#define EF_IA_64_ABI64		0x00000010	/* 64-bit ABI */
-+#define EF_IA_64_ARCH		0xff000000	/* arch. version mask */
-+
-+/* Processor specific values for the Phdr p_type field.  */
-+#define PT_IA_64_ARCHEXT	(PT_LOPROC + 0)	/* arch extension bits */
-+#define PT_IA_64_UNWIND		(PT_LOPROC + 1)	/* ia64 unwind bits */
-+#define PT_IA_64_HP_OPT_ANOT	(PT_LOOS + 0x12)
-+#define PT_IA_64_HP_HSL_ANOT	(PT_LOOS + 0x13)
-+#define PT_IA_64_HP_STACK	(PT_LOOS + 0x14)
-+
-+/* Processor specific flags for the Phdr p_flags field.  */
-+#define PF_IA_64_NORECOV	0x80000000	/* spec insns w/o recovery */
-+
-+/* Processor specific values for the Shdr sh_type field.  */
-+#define SHT_IA_64_EXT		(SHT_LOPROC + 0) /* extension bits */
-+#define SHT_IA_64_UNWIND	(SHT_LOPROC + 1) /* unwind bits */
-+
-+/* Processor specific flags for the Shdr sh_flags field.  */
-+#define SHF_IA_64_SHORT		0x10000000	/* section near gp */
-+#define SHF_IA_64_NORECOV	0x20000000	/* spec insns w/o recovery */
-+
-+/* Processor specific values for the Dyn d_tag field.  */
-+#define DT_IA_64_PLT_RESERVE	(DT_LOPROC + 0)
-+#define DT_IA_64_NUM		1
-+
-+/* IA-64 relocations.  */
-+#define R_IA64_NONE		0x00	/* none */
-+#define R_IA64_IMM14		0x21	/* symbol + addend, add imm14 */
-+#define R_IA64_IMM22		0x22	/* symbol + addend, add imm22 */
-+#define R_IA64_IMM64		0x23	/* symbol + addend, mov imm64 */
-+#define R_IA64_DIR32MSB		0x24	/* symbol + addend, data4 MSB */
-+#define R_IA64_DIR32LSB		0x25	/* symbol + addend, data4 LSB */
-+#define R_IA64_DIR64MSB		0x26	/* symbol + addend, data8 MSB */
-+#define R_IA64_DIR64LSB		0x27	/* symbol + addend, data8 LSB */
-+#define R_IA64_GPREL22		0x2a	/* @gprel(sym + add), add imm22 */
-+#define R_IA64_GPREL64I		0x2b	/* @gprel(sym + add), mov imm64 */
-+#define R_IA64_GPREL32MSB	0x2c	/* @gprel(sym + add), data4 MSB */
-+#define R_IA64_GPREL32LSB	0x2d	/* @gprel(sym + add), data4 LSB */
-+#define R_IA64_GPREL64MSB	0x2e	/* @gprel(sym + add), data8 MSB */
-+#define R_IA64_GPREL64LSB	0x2f	/* @gprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF22		0x32	/* @ltoff(sym + add), add imm22 */
-+#define R_IA64_LTOFF64I		0x33	/* @ltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF22		0x3a	/* @pltoff(sym + add), add imm22 */
-+#define R_IA64_PLTOFF64I	0x3b	/* @pltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF64MSB	0x3e	/* @pltoff(sym + add), data8 MSB */
-+#define R_IA64_PLTOFF64LSB	0x3f	/* @pltoff(sym + add), data8 LSB */
-+#define R_IA64_FPTR64I		0x43	/* @fptr(sym + add), mov imm64 */
-+#define R_IA64_FPTR32MSB	0x44	/* @fptr(sym + add), data4 MSB */
-+#define R_IA64_FPTR32LSB	0x45	/* @fptr(sym + add), data4 LSB */
-+#define R_IA64_FPTR64MSB	0x46	/* @fptr(sym + add), data8 MSB */
-+#define R_IA64_FPTR64LSB	0x47	/* @fptr(sym + add), data8 LSB */
-+#define R_IA64_PCREL60B		0x48	/* @pcrel(sym + add), brl */
-+#define R_IA64_PCREL21B		0x49	/* @pcrel(sym + add), ptb, call */
-+#define R_IA64_PCREL21M		0x4a	/* @pcrel(sym + add), chk.s */
-+#define R_IA64_PCREL21F		0x4b	/* @pcrel(sym + add), fchkf */
-+#define R_IA64_PCREL32MSB	0x4c	/* @pcrel(sym + add), data4 MSB */
-+#define R_IA64_PCREL32LSB	0x4d	/* @pcrel(sym + add), data4 LSB */
-+#define R_IA64_PCREL64MSB	0x4e	/* @pcrel(sym + add), data8 MSB */
-+#define R_IA64_PCREL64LSB	0x4f	/* @pcrel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_FPTR22	0x52	/* @ltoff(@fptr(s+a)), imm22 */
-+#define R_IA64_LTOFF_FPTR64I	0x53	/* @ltoff(@fptr(s+a)), imm64 */
-+#define R_IA64_LTOFF_FPTR32MSB	0x54	/* @ltoff(@fptr(s+a)), data4 MSB */
-+#define R_IA64_LTOFF_FPTR32LSB	0x55	/* @ltoff(@fptr(s+a)), data4 LSB */
-+#define R_IA64_LTOFF_FPTR64MSB	0x56	/* @ltoff(@fptr(s+a)), data8 MSB */
-+#define R_IA64_LTOFF_FPTR64LSB	0x57	/* @ltoff(@fptr(s+a)), data8 LSB */
-+#define R_IA64_SEGREL32MSB	0x5c	/* @segrel(sym + add), data4 MSB */
-+#define R_IA64_SEGREL32LSB	0x5d	/* @segrel(sym + add), data4 LSB */
-+#define R_IA64_SEGREL64MSB	0x5e	/* @segrel(sym + add), data8 MSB */
-+#define R_IA64_SEGREL64LSB	0x5f	/* @segrel(sym + add), data8 LSB */
-+#define R_IA64_SECREL32MSB	0x64	/* @secrel(sym + add), data4 MSB */
-+#define R_IA64_SECREL32LSB	0x65	/* @secrel(sym + add), data4 LSB */
-+#define R_IA64_SECREL64MSB	0x66	/* @secrel(sym + add), data8 MSB */
-+#define R_IA64_SECREL64LSB	0x67	/* @secrel(sym + add), data8 LSB */
-+#define R_IA64_REL32MSB		0x6c	/* data 4 + REL */
-+#define R_IA64_REL32LSB		0x6d	/* data 4 + REL */
-+#define R_IA64_REL64MSB		0x6e	/* data 8 + REL */
-+#define R_IA64_REL64LSB		0x6f	/* data 8 + REL */
-+#define R_IA64_LTV32MSB		0x74	/* symbol + addend, data4 MSB */
-+#define R_IA64_LTV32LSB		0x75	/* symbol + addend, data4 LSB */
-+#define R_IA64_LTV64MSB		0x76	/* symbol + addend, data8 MSB */
-+#define R_IA64_LTV64LSB		0x77	/* symbol + addend, data8 LSB */
-+#define R_IA64_PCREL21BI	0x79	/* @pcrel(sym + add), 21bit inst */
-+#define R_IA64_PCREL22		0x7a	/* @pcrel(sym + add), 22bit inst */
-+#define R_IA64_PCREL64I		0x7b	/* @pcrel(sym + add), 64bit inst */
-+#define R_IA64_IPLTMSB		0x80	/* dynamic reloc, imported PLT, MSB */
-+#define R_IA64_IPLTLSB		0x81	/* dynamic reloc, imported PLT, LSB */
-+#define R_IA64_COPY		0x84	/* copy relocation */
-+#define R_IA64_SUB		0x85	/* Addend and symbol difference */
-+#define R_IA64_LTOFF22X		0x86	/* LTOFF22, relaxable.  */
-+#define R_IA64_LDXMOV		0x87	/* Use of LTOFF22X.  */
-+#define R_IA64_TPREL14		0x91	/* @tprel(sym + add), imm14 */
-+#define R_IA64_TPREL22		0x92	/* @tprel(sym + add), imm22 */
-+#define R_IA64_TPREL64I		0x93	/* @tprel(sym + add), imm64 */
-+#define R_IA64_TPREL64MSB	0x96	/* @tprel(sym + add), data8 MSB */
-+#define R_IA64_TPREL64LSB	0x97	/* @tprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_TPREL22	0x9a	/* @ltoff(@tprel(s+a)), imm2 */
-+#define R_IA64_DTPMOD64MSB	0xa6	/* @dtpmod(sym + add), data8 MSB */
-+#define R_IA64_DTPMOD64LSB	0xa7	/* @dtpmod(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPMOD22	0xaa	/* @ltoff(@dtpmod(sym + add)), imm22 */
-+#define R_IA64_DTPREL14		0xb1	/* @dtprel(sym + add), imm14 */
-+#define R_IA64_DTPREL22		0xb2	/* @dtprel(sym + add), imm22 */
-+#define R_IA64_DTPREL64I	0xb3	/* @dtprel(sym + add), imm64 */
-+#define R_IA64_DTPREL32MSB	0xb4	/* @dtprel(sym + add), data4 MSB */
-+#define R_IA64_DTPREL32LSB	0xb5	/* @dtprel(sym + add), data4 LSB */
-+#define R_IA64_DTPREL64MSB	0xb6	/* @dtprel(sym + add), data8 MSB */
-+#define R_IA64_DTPREL64LSB	0xb7	/* @dtprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPREL22	0xba	/* @ltoff(@dtprel(s+a)), imm22 */
-+
-+/* SH specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field.  */
-+#define EF_SH_MACH_MASK		0x1f
-+#define EF_SH_UNKNOWN		0x0
-+#define EF_SH1			0x1
-+#define EF_SH2			0x2
-+#define EF_SH3			0x3
-+#define EF_SH_DSP		0x4
-+#define EF_SH3_DSP		0x5
-+#define EF_SH4AL_DSP		0x6
-+#define EF_SH3E			0x8
-+#define EF_SH4			0x9
-+#define EF_SH2E			0xb
-+#define EF_SH4A			0xc
-+#define EF_SH2A			0xd
-+#define EF_SH4_NOFPU		0x10
-+#define EF_SH4A_NOFPU		0x11
-+#define EF_SH4_NOMMU_NOFPU	0x12
-+#define EF_SH2A_NOFPU		0x13
-+#define EF_SH3_NOMMU		0x14
-+#define EF_SH2A_SH4_NOFPU	0x15
-+#define EF_SH2A_SH3_NOFPU	0x16
-+#define EF_SH2A_SH4		0x17
-+#define EF_SH2A_SH3E		0x18
-+
-+/* SH relocs.  */
-+#define	R_SH_NONE		0
-+#define	R_SH_DIR32		1
-+#define	R_SH_REL32		2
-+#define	R_SH_DIR8WPN		3
-+#define	R_SH_IND12W		4
-+#define	R_SH_DIR8WPL		5
-+#define	R_SH_DIR8WPZ		6
-+#define	R_SH_DIR8BP		7
-+#define	R_SH_DIR8W		8
-+#define	R_SH_DIR8L		9
-+#define	R_SH_SWITCH16		25
-+#define	R_SH_SWITCH32		26
-+#define	R_SH_USES		27
-+#define	R_SH_COUNT		28
-+#define	R_SH_ALIGN		29
-+#define	R_SH_CODE		30
-+#define	R_SH_DATA		31
-+#define	R_SH_LABEL		32
-+#define	R_SH_SWITCH8		33
-+#define	R_SH_GNU_VTINHERIT	34
-+#define	R_SH_GNU_VTENTRY	35
-+#define	R_SH_TLS_GD_32		144
-+#define	R_SH_TLS_LD_32		145
-+#define	R_SH_TLS_LDO_32		146
-+#define	R_SH_TLS_IE_32		147
-+#define	R_SH_TLS_LE_32		148
-+#define	R_SH_TLS_DTPMOD32	149
-+#define	R_SH_TLS_DTPOFF32	150
-+#define	R_SH_TLS_TPOFF32	151
-+#define	R_SH_GOT32		160
-+#define	R_SH_PLT32		161
-+#define	R_SH_COPY		162
-+#define	R_SH_GLOB_DAT		163
-+#define	R_SH_JMP_SLOT		164
-+#define	R_SH_RELATIVE		165
-+#define	R_SH_GOTOFF		166
-+#define	R_SH_GOTPC		167
-+/* Keep this the last entry.  */
-+#define	R_SH_NUM		256
-+
-+/* S/390 specific definitions.  */
-+
-+/* Valid values for the e_flags field.  */
-+
-+#define EF_S390_HIGH_GPRS    0x00000001  /* High GPRs kernel facility needed.  */
-+
-+/* Additional s390 relocs */
-+
-+#define R_390_NONE		0	/* No reloc.  */
-+#define R_390_8			1	/* Direct 8 bit.  */
-+#define R_390_12		2	/* Direct 12 bit.  */
-+#define R_390_16		3	/* Direct 16 bit.  */
-+#define R_390_32		4	/* Direct 32 bit.  */
-+#define R_390_PC32		5	/* PC relative 32 bit.	*/
-+#define R_390_GOT12		6	/* 12 bit GOT offset.  */
-+#define R_390_GOT32		7	/* 32 bit GOT offset.  */
-+#define R_390_PLT32		8	/* 32 bit PC relative PLT address.  */
-+#define R_390_COPY		9	/* Copy symbol at runtime.  */
-+#define R_390_GLOB_DAT		10	/* Create GOT entry.  */
-+#define R_390_JMP_SLOT		11	/* Create PLT entry.  */
-+#define R_390_RELATIVE		12	/* Adjust by program base.  */
-+#define R_390_GOTOFF32		13	/* 32 bit offset to GOT.	 */
-+#define R_390_GOTPC		14	/* 32 bit PC relative offset to GOT.  */
-+#define R_390_GOT16		15	/* 16 bit GOT offset.  */
-+#define R_390_PC16		16	/* PC relative 16 bit.	*/
-+#define R_390_PC16DBL		17	/* PC relative 16 bit shifted by 1.  */
-+#define R_390_PLT16DBL		18	/* 16 bit PC rel. PLT shifted by 1.  */
-+#define R_390_PC32DBL		19	/* PC relative 32 bit shifted by 1.  */
-+#define R_390_PLT32DBL		20	/* 32 bit PC rel. PLT shifted by 1.  */
-+#define R_390_GOTPCDBL		21	/* 32 bit PC rel. GOT shifted by 1.  */
-+#define R_390_64		22	/* Direct 64 bit.  */
-+#define R_390_PC64		23	/* PC relative 64 bit.	*/
-+#define R_390_GOT64		24	/* 64 bit GOT offset.  */
-+#define R_390_PLT64		25	/* 64 bit PC relative PLT address.  */
-+#define R_390_GOTENT		26	/* 32 bit PC rel. to GOT entry >> 1. */
-+#define R_390_GOTOFF16		27	/* 16 bit offset to GOT. */
-+#define R_390_GOTOFF64		28	/* 64 bit offset to GOT. */
-+#define R_390_GOTPLT12		29	/* 12 bit offset to jump slot.	*/
-+#define R_390_GOTPLT16		30	/* 16 bit offset to jump slot.	*/
-+#define R_390_GOTPLT32		31	/* 32 bit offset to jump slot.	*/
-+#define R_390_GOTPLT64		32	/* 64 bit offset to jump slot.	*/
-+#define R_390_GOTPLTENT		33	/* 32 bit rel. offset to jump slot.  */
-+#define R_390_PLTOFF16		34	/* 16 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF32		35	/* 32 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF64		36	/* 16 bit offset from GOT to PLT. */
-+#define R_390_TLS_LOAD		37	/* Tag for load insn in TLS code.  */
-+#define R_390_TLS_GDCALL	38	/* Tag for function call in general
-+					   dynamic TLS code. */
-+#define R_390_TLS_LDCALL	39	/* Tag for function call in local
-+					   dynamic TLS code. */
-+#define R_390_TLS_GD32		40	/* Direct 32 bit for general dynamic
-+					   thread local data.  */
-+#define R_390_TLS_GD64		41	/* Direct 64 bit for general dynamic
-+					  thread local data.  */
-+#define R_390_TLS_GOTIE12	42	/* 12 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_TLS_GOTIE32	43	/* 32 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_TLS_GOTIE64	44	/* 64 bit GOT offset for static TLS
-+					   block offset. */
-+#define R_390_TLS_LDM32		45	/* Direct 32 bit for local dynamic
-+					   thread local data in LE code.  */
-+#define R_390_TLS_LDM64		46	/* Direct 64 bit for local dynamic
-+					   thread local data in LE code.  */
-+#define R_390_TLS_IE32		47	/* 32 bit address of GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_IE64		48	/* 64 bit address of GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_IEENT		49	/* 32 bit rel. offset to GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_LE32		50	/* 32 bit negated offset relative to
-+					   static TLS block.  */
-+#define R_390_TLS_LE64		51	/* 64 bit negated offset relative to
-+					   static TLS block.  */
-+#define R_390_TLS_LDO32		52	/* 32 bit offset relative to TLS
-+					   block.  */
-+#define R_390_TLS_LDO64		53	/* 64 bit offset relative to TLS
-+					   block.  */
-+#define R_390_TLS_DTPMOD	54	/* ID of module containing symbol.  */
-+#define R_390_TLS_DTPOFF	55	/* Offset in TLS block.	 */
-+#define R_390_TLS_TPOFF		56	/* Negated offset in static TLS
-+					   block.  */
-+#define R_390_20		57	/* Direct 20 bit.  */
-+#define R_390_GOT20		58	/* 20 bit GOT offset.  */
-+#define R_390_GOTPLT20		59	/* 20 bit offset to jump slot.  */
-+#define R_390_TLS_GOTIE20	60	/* 20 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_IRELATIVE         61      /* STT_GNU_IFUNC relocation.  */
-+/* Keep this the last entry.  */
-+#define R_390_NUM		62
-+
-+
-+/* CRIS relocations.  */
-+#define R_CRIS_NONE		0
-+#define R_CRIS_8		1
-+#define R_CRIS_16		2
-+#define R_CRIS_32		3
-+#define R_CRIS_8_PCREL		4
-+#define R_CRIS_16_PCREL		5
-+#define R_CRIS_32_PCREL		6
-+#define R_CRIS_GNU_VTINHERIT	7
-+#define R_CRIS_GNU_VTENTRY	8
-+#define R_CRIS_COPY		9
-+#define R_CRIS_GLOB_DAT		10
-+#define R_CRIS_JUMP_SLOT	11
-+#define R_CRIS_RELATIVE		12
-+#define R_CRIS_16_GOT		13
-+#define R_CRIS_32_GOT		14
-+#define R_CRIS_16_GOTPLT	15
-+#define R_CRIS_32_GOTPLT	16
-+#define R_CRIS_32_GOTREL	17
-+#define R_CRIS_32_PLT_GOTREL	18
-+#define R_CRIS_32_PLT_PCREL	19
-+
-+#define R_CRIS_NUM		20
-+
-+
-+/* AMD x86-64 relocations.  */
-+#define R_X86_64_NONE		0	/* No reloc */
-+#define R_X86_64_64		1	/* Direct 64 bit  */
-+#define R_X86_64_PC32		2	/* PC relative 32 bit signed */
-+#define R_X86_64_GOT32		3	/* 32 bit GOT entry */
-+#define R_X86_64_PLT32		4	/* 32 bit PLT address */
-+#define R_X86_64_COPY		5	/* Copy symbol at runtime */
-+#define R_X86_64_GLOB_DAT	6	/* Create GOT entry */
-+#define R_X86_64_JUMP_SLOT	7	/* Create PLT entry */
-+#define R_X86_64_RELATIVE	8	/* Adjust by program base */
-+#define R_X86_64_GOTPCREL	9	/* 32 bit signed PC relative
-+					   offset to GOT */
-+#define R_X86_64_32		10	/* Direct 32 bit zero extended */
-+#define R_X86_64_32S		11	/* Direct 32 bit sign extended */
-+#define R_X86_64_16		12	/* Direct 16 bit zero extended */
-+#define R_X86_64_PC16		13	/* 16 bit sign extended pc relative */
-+#define R_X86_64_8		14	/* Direct 8 bit sign extended  */
-+#define R_X86_64_PC8		15	/* 8 bit sign extended pc relative */
-+#define R_X86_64_DTPMOD64	16	/* ID of module containing symbol */
-+#define R_X86_64_DTPOFF64	17	/* Offset in module's TLS block */
-+#define R_X86_64_TPOFF64	18	/* Offset in initial TLS block */
-+#define R_X86_64_TLSGD		19	/* 32 bit signed PC relative offset
-+					   to two GOT entries for GD symbol */
-+#define R_X86_64_TLSLD		20	/* 32 bit signed PC relative offset
-+					   to two GOT entries for LD symbol */
-+#define R_X86_64_DTPOFF32	21	/* Offset in TLS block */
-+#define R_X86_64_GOTTPOFF	22	/* 32 bit signed PC relative offset
-+					   to GOT entry for IE symbol */
-+#define R_X86_64_TPOFF32	23	/* Offset in initial TLS block */
-+#define R_X86_64_PC64		24	/* PC relative 64 bit */
-+#define R_X86_64_GOTOFF64	25	/* 64 bit offset to GOT */
-+#define R_X86_64_GOTPC32	26	/* 32 bit signed pc relative
-+					   offset to GOT */
-+#define R_X86_64_GOT64		27	/* 64-bit GOT entry offset */
-+#define R_X86_64_GOTPCREL64	28	/* 64-bit PC relative offset
-+					   to GOT entry */
-+#define R_X86_64_GOTPC64	29	/* 64-bit PC relative offset to GOT */
-+#define R_X86_64_GOTPLT64	30 	/* like GOT64, says PLT entry needed */
-+#define R_X86_64_PLTOFF64	31	/* 64-bit GOT relative offset
-+					   to PLT entry */
-+#define R_X86_64_SIZE32		32	/* Size of symbol plus 32-bit addend */
-+#define R_X86_64_SIZE64		33	/* Size of symbol plus 64-bit addend */
-+#define R_X86_64_GOTPC32_TLSDESC 34	/* GOT offset for TLS descriptor.  */
-+#define R_X86_64_TLSDESC_CALL   35	/* Marker for call through TLS
-+					   descriptor.  */
-+#define R_X86_64_TLSDESC        36	/* TLS descriptor.  */
-+#define R_X86_64_IRELATIVE	37	/* Adjust indirectly by program base */
-+#define R_X86_64_RELATIVE64	38	/* 64-bit adjust by program base */
-+
-+#define R_X86_64_NUM		39
-+
-+
-+/* AM33 relocations.  */
-+#define R_MN10300_NONE		0	/* No reloc.  */
-+#define R_MN10300_32		1	/* Direct 32 bit.  */
-+#define R_MN10300_16		2	/* Direct 16 bit.  */
-+#define R_MN10300_8		3	/* Direct 8 bit.  */
-+#define R_MN10300_PCREL32	4	/* PC-relative 32-bit.  */
-+#define R_MN10300_PCREL16	5	/* PC-relative 16-bit signed.  */
-+#define R_MN10300_PCREL8	6	/* PC-relative 8-bit signed.  */
-+#define R_MN10300_GNU_VTINHERIT	7	/* Ancient C++ vtable garbage... */
-+#define R_MN10300_GNU_VTENTRY	8	/* ... collection annotation.  */
-+#define R_MN10300_24		9	/* Direct 24 bit.  */
-+#define R_MN10300_GOTPC32	10	/* 32-bit PCrel offset to GOT.  */
-+#define R_MN10300_GOTPC16	11	/* 16-bit PCrel offset to GOT.  */
-+#define R_MN10300_GOTOFF32	12	/* 32-bit offset from GOT.  */
-+#define R_MN10300_GOTOFF24	13	/* 24-bit offset from GOT.  */
-+#define R_MN10300_GOTOFF16	14	/* 16-bit offset from GOT.  */
-+#define R_MN10300_PLT32		15	/* 32-bit PCrel to PLT entry.  */
-+#define R_MN10300_PLT16		16	/* 16-bit PCrel to PLT entry.  */
-+#define R_MN10300_GOT32		17	/* 32-bit offset to GOT entry.  */
-+#define R_MN10300_GOT24		18	/* 24-bit offset to GOT entry.  */
-+#define R_MN10300_GOT16		19	/* 16-bit offset to GOT entry.  */
-+#define R_MN10300_COPY		20	/* Copy symbol at runtime.  */
-+#define R_MN10300_GLOB_DAT	21	/* Create GOT entry.  */
-+#define R_MN10300_JMP_SLOT	22	/* Create PLT entry.  */
-+#define R_MN10300_RELATIVE	23	/* Adjust by program base.  */
-+
-+#define R_MN10300_NUM		24
-+
-+
-+/* M32R relocs.  */
-+#define R_M32R_NONE		0	/* No reloc. */
-+#define R_M32R_16		1	/* Direct 16 bit. */
-+#define R_M32R_32		2	/* Direct 32 bit. */
-+#define R_M32R_24		3	/* Direct 24 bit. */
-+#define R_M32R_10_PCREL		4	/* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL		5	/* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL		6	/* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO		7	/* High 16 bit with unsigned low. */
-+#define R_M32R_HI16_SLO		8	/* High 16 bit with signed low. */
-+#define R_M32R_LO16		9	/* Low 16 bit. */
-+#define R_M32R_SDA16		10	/* 16 bit offset in SDA. */
-+#define R_M32R_GNU_VTINHERIT	11
-+#define R_M32R_GNU_VTENTRY	12
-+/* M32R relocs use SHT_RELA.  */
-+#define R_M32R_16_RELA		33	/* Direct 16 bit. */
-+#define R_M32R_32_RELA		34	/* Direct 32 bit. */
-+#define R_M32R_24_RELA		35	/* Direct 24 bit. */
-+#define R_M32R_10_PCREL_RELA	36	/* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL_RELA	37	/* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL_RELA	38	/* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO_RELA	39	/* High 16 bit with unsigned low */
-+#define R_M32R_HI16_SLO_RELA	40	/* High 16 bit with signed low */
-+#define R_M32R_LO16_RELA	41	/* Low 16 bit */
-+#define R_M32R_SDA16_RELA	42	/* 16 bit offset in SDA */
-+#define R_M32R_RELA_GNU_VTINHERIT	43
-+#define R_M32R_RELA_GNU_VTENTRY	44
-+#define R_M32R_REL32		45	/* PC relative 32 bit.  */
-+
-+#define R_M32R_GOT24		48	/* 24 bit GOT entry */
-+#define R_M32R_26_PLTREL	49	/* 26 bit PC relative to PLT shifted */
-+#define R_M32R_COPY		50	/* Copy symbol at runtime */
-+#define R_M32R_GLOB_DAT		51	/* Create GOT entry */
-+#define R_M32R_JMP_SLOT		52	/* Create PLT entry */
-+#define R_M32R_RELATIVE		53	/* Adjust by program base */
-+#define R_M32R_GOTOFF		54	/* 24 bit offset to GOT */
-+#define R_M32R_GOTPC24		55	/* 24 bit PC relative offset to GOT */
-+#define R_M32R_GOT16_HI_ULO	56	/* High 16 bit GOT entry with unsigned
-+					   low */
-+#define R_M32R_GOT16_HI_SLO	57	/* High 16 bit GOT entry with signed
-+					   low */
-+#define R_M32R_GOT16_LO		58	/* Low 16 bit GOT entry */
-+#define R_M32R_GOTPC_HI_ULO	59	/* High 16 bit PC relative offset to
-+					   GOT with unsigned low */
-+#define R_M32R_GOTPC_HI_SLO	60	/* High 16 bit PC relative offset to
-+					   GOT with signed low */
-+#define R_M32R_GOTPC_LO		61	/* Low 16 bit PC relative offset to
-+					   GOT */
-+#define R_M32R_GOTOFF_HI_ULO	62	/* High 16 bit offset to GOT
-+					   with unsigned low */
-+#define R_M32R_GOTOFF_HI_SLO	63	/* High 16 bit offset to GOT
-+					   with signed low */
-+#define R_M32R_GOTOFF_LO	64	/* Low 16 bit offset to GOT */
-+#define R_M32R_NUM		256	/* Keep this the last entry. */
-+
-+
-+/* TILEPro relocations.  */
-+#define R_TILEPRO_NONE		0	/* No reloc */
-+#define R_TILEPRO_32		1	/* Direct 32 bit */
-+#define R_TILEPRO_16		2	/* Direct 16 bit */
-+#define R_TILEPRO_8		3	/* Direct 8 bit */
-+#define R_TILEPRO_32_PCREL	4	/* PC relative 32 bit */
-+#define R_TILEPRO_16_PCREL	5	/* PC relative 16 bit */
-+#define R_TILEPRO_8_PCREL	6	/* PC relative 8 bit */
-+#define R_TILEPRO_LO16		7	/* Low 16 bit */
-+#define R_TILEPRO_HI16		8	/* High 16 bit */
-+#define R_TILEPRO_HA16		9	/* High 16 bit, adjusted */
-+#define R_TILEPRO_COPY		10	/* Copy relocation */
-+#define R_TILEPRO_GLOB_DAT	11	/* Create GOT entry */
-+#define R_TILEPRO_JMP_SLOT	12	/* Create PLT entry */
-+#define R_TILEPRO_RELATIVE	13	/* Adjust by program base */
-+#define R_TILEPRO_BROFF_X1	14	/* X1 pipe branch offset */
-+#define R_TILEPRO_JOFFLONG_X1	15	/* X1 pipe jump offset */
-+#define R_TILEPRO_JOFFLONG_X1_PLT 16	/* X1 pipe jump offset to PLT */
-+#define R_TILEPRO_IMM8_X0	17	/* X0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y0	18	/* Y0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_X1	19	/* X1 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y1	20	/* Y1 pipe 8-bit */
-+#define R_TILEPRO_MT_IMM15_X1	21	/* X1 pipe mtspr */
-+#define R_TILEPRO_MF_IMM15_X1	22	/* X1 pipe mfspr */
-+#define R_TILEPRO_IMM16_X0	23	/* X0 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X1	24	/* X1 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X0_LO	25	/* X0 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X1_LO	26	/* X1 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X0_HI	27	/* X0 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X1_HI	28	/* X1 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X0_HA	29	/* X0 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X1_HA	30	/* X1 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X0_PCREL 31	/* X0 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X1_PCREL 32	/* X1 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X0_LO_PCREL 33	/* X0 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X1_LO_PCREL 34	/* X1 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X0_HI_PCREL 35	/* X0 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X1_HI_PCREL 36	/* X1 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X0_HA_PCREL 37	/* X0 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X1_HA_PCREL 38	/* X1 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X0_GOT	39	/* X0 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT	40	/* X1 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_LO 41	/* X0 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_LO 42	/* X1 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HI 43	/* X0 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HI 44	/* X1 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HA 45	/* X0 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HA 46	/* X1 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_MMSTART_X0	47	/* X0 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X0	48	/* X0 pipe mm "end" */
-+#define R_TILEPRO_MMSTART_X1	49	/* X1 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X1	50	/* X1 pipe mm "end" */
-+#define R_TILEPRO_SHAMT_X0	51	/* X0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_X1	52	/* X1 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y0	53	/* Y0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y1	54	/* Y1 pipe shift amount */
-+#define R_TILEPRO_DEST_IMM8_X1	55	/* X1 pipe destination 8-bit */
-+/* Relocs 56-59 are currently not defined.  */
-+#define R_TILEPRO_TLS_GD_CALL	60	/* "jal" for TLS GD */
-+#define R_TILEPRO_IMM8_X0_TLS_GD_ADD 61	/* X0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_X1_TLS_GD_ADD 62	/* X1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y0_TLS_GD_ADD 63	/* Y0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y1_TLS_GD_ADD 64	/* Y1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_TLS_IE_LOAD	65	/* "lw_tls" for TLS IE */
-+#define R_TILEPRO_IMM16_X0_TLS_GD 66	/* X0 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD 67	/* X1 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_LO 68	/* X0 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_LO 69	/* X1 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HI 70	/* X0 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HI 71	/* X1 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HA 72	/* X0 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HA 73	/* X1 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE 74	/* X0 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE 75	/* X1 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_LO 76	/* X0 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_LO 77	/* X1 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HI 78	/* X0 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HI 79	/* X1 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HA 80	/* X0 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HA 81	/* X1 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_TLS_DTPMOD32	82	/* ID of module containing symbol */
-+#define R_TILEPRO_TLS_DTPOFF32	83	/* Offset in TLS block */
-+#define R_TILEPRO_TLS_TPOFF32	84	/* Offset in static TLS block */
-+#define R_TILEPRO_IMM16_X0_TLS_LE 85	/* X0 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE 86	/* X1 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_LO 87	/* X0 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_LO 88	/* X1 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HI 89	/* X0 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HI 90	/* X1 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HA 91	/* X0 pipe ha() 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HA 92	/* X1 pipe ha() 16-bit TLS LE offset */
-+
-+#define R_TILEPRO_GNU_VTINHERIT	128	/* GNU C++ vtable hierarchy */
-+#define R_TILEPRO_GNU_VTENTRY	129	/* GNU C++ vtable member usage */
-+
-+#define R_TILEPRO_NUM		130
-+
-+
-+/* TILE-Gx relocations.  */
-+#define R_TILEGX_NONE		0	/* No reloc */
-+#define R_TILEGX_64		1	/* Direct 64 bit */
-+#define R_TILEGX_32		2	/* Direct 32 bit */
-+#define R_TILEGX_16		3	/* Direct 16 bit */
-+#define R_TILEGX_8		4	/* Direct 8 bit */
-+#define R_TILEGX_64_PCREL	5	/* PC relative 64 bit */
-+#define R_TILEGX_32_PCREL	6	/* PC relative 32 bit */
-+#define R_TILEGX_16_PCREL	7	/* PC relative 16 bit */
-+#define R_TILEGX_8_PCREL	8	/* PC relative 8 bit */
-+#define R_TILEGX_HW0		9	/* hword 0 16-bit */
-+#define R_TILEGX_HW1		10	/* hword 1 16-bit */
-+#define R_TILEGX_HW2		11	/* hword 2 16-bit */
-+#define R_TILEGX_HW3		12	/* hword 3 16-bit */
-+#define R_TILEGX_HW0_LAST	13	/* last hword 0 16-bit */
-+#define R_TILEGX_HW1_LAST	14	/* last hword 1 16-bit */
-+#define R_TILEGX_HW2_LAST	15	/* last hword 2 16-bit */
-+#define R_TILEGX_COPY		16	/* Copy relocation */
-+#define R_TILEGX_GLOB_DAT	17	/* Create GOT entry */
-+#define R_TILEGX_JMP_SLOT	18	/* Create PLT entry */
-+#define R_TILEGX_RELATIVE	19	/* Adjust by program base */
-+#define R_TILEGX_BROFF_X1	20	/* X1 pipe branch offset */
-+#define R_TILEGX_JUMPOFF_X1	21	/* X1 pipe jump offset */
-+#define R_TILEGX_JUMPOFF_X1_PLT	22	/* X1 pipe jump offset to PLT */
-+#define R_TILEGX_IMM8_X0	23	/* X0 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y0	24	/* Y0 pipe 8-bit */
-+#define R_TILEGX_IMM8_X1	25	/* X1 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y1	26	/* Y1 pipe 8-bit */
-+#define R_TILEGX_DEST_IMM8_X1	27	/* X1 pipe destination 8-bit */
-+#define R_TILEGX_MT_IMM14_X1	28	/* X1 pipe mtspr */
-+#define R_TILEGX_MF_IMM14_X1	29	/* X1 pipe mfspr */
-+#define R_TILEGX_MMSTART_X0	30	/* X0 pipe mm "start" */
-+#define R_TILEGX_MMEND_X0	31	/* X0 pipe mm "end" */
-+#define R_TILEGX_SHAMT_X0	32	/* X0 pipe shift amount */
-+#define R_TILEGX_SHAMT_X1	33	/* X1 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y0	34	/* Y0 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y1	35	/* Y1 pipe shift amount */
-+#define R_TILEGX_IMM16_X0_HW0	36	/* X0 pipe hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0	37	/* X1 pipe hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1	38	/* X0 pipe hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1	39	/* X1 pipe hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2	40	/* X0 pipe hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2	41	/* X1 pipe hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3	42	/* X0 pipe hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3	43	/* X1 pipe hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST 44	/* X0 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST 45	/* X1 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST 46	/* X0 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST 47	/* X1 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST 48	/* X0 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST 49	/* X1 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_PCREL 50	/* X0 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_PCREL 51	/* X1 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_PCREL 52	/* X0 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_PCREL 53	/* X1 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_PCREL 54	/* X0 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_PCREL 55	/* X1 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3_PCREL 56	/* X0 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3_PCREL 57	/* X1 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_PCREL 58 /* X0 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_PCREL 59 /* X1 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_PCREL 60 /* X0 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_PCREL 61 /* X1 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST_PCREL 62 /* X0 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST_PCREL 63 /* X1 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_GOT 64	/* X0 pipe hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_GOT 65	/* X1 pipe hword 0 GOT offset */
-+/* Relocs 66-71 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_GOT 72 /* X0 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_GOT 73 /* X1 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_GOT 74 /* X0 pipe last hword 1 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_GOT 75 /* X1 pipe last hword 1 GOT offset */
-+/* Relocs 76-77 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_GD 78	/* X0 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_GD 79	/* X1 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_LE 80	/* X0 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_LE 81	/* X1 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE 82 /* X0 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE 83 /* X1 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE 84 /* X0 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE 85 /* X1 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_GD 86 /* X0 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_GD 87 /* X1 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_GD 88 /* X0 pipe last hword 1 GD off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_GD 89 /* X1 pipe last hword 1 GD off */
-+/* Relocs 90-91 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_IE 92	/* X0 pipe hword 0 TLS IE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_IE 93	/* X1 pipe hword 0 TLS IE offset */
-+/* Relocs 94-99 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_IE 100 /* X0 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_IE 101 /* X1 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_IE 102 /* X0 pipe last hword 1 IE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_IE 103 /* X1 pipe last hword 1 IE off */
-+/* Relocs 104-105 are currently not defined.  */
-+#define R_TILEGX_TLS_DTPMOD64	106	/* 64-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF64	107	/* 64-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF64	108	/* 64-bit offset in static TLS block */
-+#define R_TILEGX_TLS_DTPMOD32	109	/* 32-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF32	110	/* 32-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF32	111	/* 32-bit offset in static TLS block */
-+#define R_TILEGX_TLS_GD_CALL	112	/* "jal" for TLS GD */
-+#define R_TILEGX_IMM8_X0_TLS_GD_ADD 113	/* X0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_X1_TLS_GD_ADD 114	/* X1 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y0_TLS_GD_ADD 115	/* Y0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y1_TLS_GD_ADD 116	/* Y1 pipe "addi" for TLS GD */
-+#define R_TILEGX_TLS_IE_LOAD	117	/* "ld_tls" for TLS IE */
-+#define R_TILEGX_IMM8_X0_TLS_ADD 118	/* X0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_X1_TLS_ADD 119	/* X1 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y0_TLS_ADD 120	/* Y0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y1_TLS_ADD 121	/* Y1 pipe "addi" for TLS GD/IE */
-+
-+#define R_TILEGX_GNU_VTINHERIT	128	/* GNU C++ vtable hierarchy */
-+#define R_TILEGX_GNU_VTENTRY	129	/* GNU C++ vtable member usage */
-+
-+#define R_TILEGX_NUM		130
-+
-+#endif	/* elf.h */
---- a/scripts/mod/mk_elfconfig.c
-+++ b/scripts/mod/mk_elfconfig.c
-@@ -2,7 +2,11 @@
- #include <stdio.h>
- #include <stdlib.h>
- #include <string.h>
-+#ifndef __APPLE__
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
- 
- int
- main(int argc, char **argv)
---- a/scripts/mod/modpost.h
-+++ b/scripts/mod/modpost.h
-@@ -8,7 +8,11 @@
- #include <sys/mman.h>
- #include <fcntl.h>
- #include <unistd.h>
-+#if !(defined(__APPLE__) || defined(__CYGWIN__))
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
- 
- #include "elfconfig.h"
- 
diff --git a/target/linux/generic/hack-5.10/211-darwin-uuid-typedef-clash.patch b/target/linux/generic/hack-5.10/211-darwin-uuid-typedef-clash.patch
deleted file mode 100644
index 50a6227148f4..000000000000
--- a/target/linux/generic/hack-5.10/211-darwin-uuid-typedef-clash.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From e44fc2af1ddc452b6659d08c16973d65c73b7d0a Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Wed, 5 Feb 2020 18:36:43 +0000
-Subject: [PATCH] file2alias: build on macos
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- scripts/mod/file2alias.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/scripts/mod/file2alias.c
-+++ b/scripts/mod/file2alias.c
-@@ -38,6 +38,9 @@ typedef struct {
- 	__u8 b[16];
- } guid_t;
- 
-+#ifdef __APPLE__
-+#define uuid_t compat_uuid_t
-+#endif
- /* backwards compatibility, don't use in new code */
- typedef struct {
- 	__u8 b[16];
diff --git a/target/linux/generic/hack-5.10/212-tools_portability.patch b/target/linux/generic/hack-5.10/212-tools_portability.patch
deleted file mode 100644
index 0d8eb6fb9dc2..000000000000
--- a/target/linux/generic/hack-5.10/212-tools_portability.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From 48232d3d931c95953ce2ddfe7da7bb164aef6a73 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:03:16 +0200
-Subject: fix portability of some includes files in tools/ used on the host
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- tools/include/tools/be_byteshift.h |  4 ++++
- tools/include/tools/le_byteshift.h |  4 ++++
- tools/include/tools/linux_types.h  | 22 ++++++++++++++++++++++
- 3 files changed, 30 insertions(+)
- create mode 100644 tools/include/tools/linux_types.h
-
---- a/tools/include/tools/be_byteshift.h
-+++ b/tools/include/tools/be_byteshift.h
-@@ -2,6 +2,10 @@
- #ifndef _TOOLS_BE_BYTESHIFT_H
- #define _TOOLS_BE_BYTESHIFT_H
- 
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
- 
- static inline uint16_t __get_unaligned_be16(const uint8_t *p)
---- a/tools/include/tools/le_byteshift.h
-+++ b/tools/include/tools/le_byteshift.h
-@@ -2,6 +2,10 @@
- #ifndef _TOOLS_LE_BYTESHIFT_H
- #define _TOOLS_LE_BYTESHIFT_H
- 
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
- 
- static inline uint16_t __get_unaligned_le16(const uint8_t *p)
---- /dev/null
-+++ b/tools/include/tools/linux_types.h
-@@ -0,0 +1,26 @@
-+#ifndef __LINUX_TYPES_H
-+#define __LINUX_TYPES_H
-+
-+#include <stdint.h>
-+
-+typedef int8_t __s8;
-+typedef uint8_t __u8;
-+typedef uint8_t __be8;
-+typedef uint8_t __le8;
-+
-+typedef int16_t __s16;
-+typedef uint16_t __u16;
-+typedef uint16_t __be16;
-+typedef uint16_t __le16;
-+
-+typedef int32_t __s32;
-+typedef uint32_t __u32;
-+typedef uint32_t __be32;
-+typedef uint32_t __le32;
-+
-+typedef int64_t __s64;
-+typedef uint64_t __u64;
-+typedef uint64_t __be64;
-+typedef uint64_t __le64;
-+
-+#endif
---- a/tools/include/linux/types.h
-+++ b/tools/include/linux/types.h
-@@ -7,8 +7,12 @@
- #include <stdint.h>
- 
- #define __SANE_USERSPACE_TYPES__	/* For PPC64, to get LL64 types */
-+#ifndef __linux__
-+#include <tools/linux_types.h>
-+#else
- #include <asm/types.h>
- #include <asm/posix_types.h>
-+#endif
- 
- struct page;
- struct kmem_cache;
---- a/tools/perf/pmu-events/jevents.c
-+++ b/tools/perf/pmu-events/jevents.c
-@@ -1,4 +1,6 @@
-+#ifdef __linux__
- #define  _XOPEN_SOURCE 500	/* needed for nftw() */
-+#endif
- #define  _GNU_SOURCE		/* needed for asprintf() */
- 
- /* Parse event JSON files */
-@@ -35,6 +37,7 @@
- #include <stdlib.h>
- #include <errno.h>
- #include <string.h>
-+#include <strings.h>
- #include <ctype.h>
- #include <unistd.h>
- #include <stdarg.h>
---- a/tools/perf/pmu-events/json.c
-+++ b/tools/perf/pmu-events/json.c
-@@ -38,7 +38,6 @@
- #include <unistd.h>
- #include "jsmn.h"
- #include "json.h"
--#include <linux/kernel.h>
- 
- 
- static char *mapfile(const char *fn, size_t *size)
diff --git a/target/linux/generic/hack-5.10/214-spidev_h_portability.patch b/target/linux/generic/hack-5.10/214-spidev_h_portability.patch
deleted file mode 100644
index 506d50ad4de2..000000000000
--- a/target/linux/generic/hack-5.10/214-spidev_h_portability.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From be9be95ff10e16a5b4ad36f903978d0cc5747024 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:04:08 +0200
-Subject: kernel: fix linux/spi/spidev.h portability issues with musl
-
-Felix will try to get this define included into musl
-
-lede-commit: 795e7cf60de19e7a076a46874fab7bb88b43bbff
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/spi/spidev.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/uapi/linux/spi/spidev.h
-+++ b/include/uapi/linux/spi/spidev.h
-@@ -121,7 +121,7 @@ struct spi_ioc_transfer {
- 
- /* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
- #define SPI_MSGSIZE(N) \
--	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
-+	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << 13)) \
- 		? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
- #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
- 
diff --git a/target/linux/generic/hack-5.10/220-arm-gc_sections.patch b/target/linux/generic/hack-5.10/220-arm-gc_sections.patch
deleted file mode 100644
index 5b36c5ebaecd..000000000000
--- a/target/linux/generic/hack-5.10/220-arm-gc_sections.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From e3d8676f5722b7622685581e06e8f53e6138e3ab Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 23:42:36 +0200
-Subject: use -ffunction-sections, -fdata-sections and --gc-sections
-
-In combination with kernel symbol export stripping this significantly reduces
-the kernel image size. Used on both ARM and MIPS architectures.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -114,6 +114,7 @@ config ARM
- 	select HAVE_UID16
- 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
- 	select IRQ_FORCED_THREADING
-+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
- 	select MODULES_USE_ELF_REL
- 	select NEED_DMA_MAP_STATE
- 	select OF_EARLY_FLATTREE if OF
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -100,6 +100,7 @@ $(foreach o, $(libfdt_objs) atags_to_fdt
- ifdef building_out_of_srctree
- $(shell rm -f $(addprefix $(obj)/, fdt_rw.c fdt_ro.c fdt_wip.c fdt.c))
- endif
-+KBUILD_CFLAGS_KERNEL := $(patsubst -f%-sections,,$(KBUILD_CFLAGS_KERNEL))
- 
- targets       := vmlinux vmlinux.lds piggy_data piggy.o \
- 		 lib1funcs.o ashldi3.o bswapsdi2.o \
---- a/arch/arm/kernel/vmlinux.lds.S
-+++ b/arch/arm/kernel/vmlinux.lds.S
-@@ -75,7 +75,7 @@ SECTIONS
- 	. = ALIGN(4);
- 	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- 		__start___ex_table = .;
--		ARM_MMU_KEEP(*(__ex_table))
-+		KEEP(*(__ex_table))
- 		__stop___ex_table = .;
- 	}
- 
-@@ -100,24 +100,24 @@ SECTIONS
- 	}
- 	.init.arch.info : {
- 		__arch_info_begin = .;
--		*(.arch.info.init)
-+		KEEP(*(.arch.info.init))
- 		__arch_info_end = .;
- 	}
- 	.init.tagtable : {
- 		__tagtable_begin = .;
--		*(.taglist.init)
-+		KEEP(*(.taglist.init))
- 		__tagtable_end = .;
- 	}
- #ifdef CONFIG_SMP_ON_UP
- 	.init.smpalt : {
- 		__smpalt_begin = .;
--		*(.alt.smp.init)
-+		KEEP(*(.alt.smp.init))
- 		__smpalt_end = .;
- 	}
- #endif
- 	.init.pv_table : {
- 		__pv_table_begin = .;
--		*(.pv_table)
-+		KEEP(*(.pv_table))
- 		__pv_table_end = .;
- 	}
- 
---- a/arch/arm/include/asm/vmlinux.lds.h
-+++ b/arch/arm/include/asm/vmlinux.lds.h
-@@ -42,13 +42,13 @@
- #define PROC_INFO							\
- 		. = ALIGN(4);						\
- 		__proc_info_begin = .;					\
--		*(.proc.info.init)					\
-+		KEEP(*(.proc.info.init))				\
- 		__proc_info_end = .;
- 
- #define IDMAP_TEXT							\
- 		ALIGN_FUNCTION();					\
- 		__idmap_text_start = .;					\
--		*(.idmap.text)						\
-+		KEEP(*(.idmap.text))					\
- 		__idmap_text_end = .;					\
- 
- #define ARM_DISCARD							\
-@@ -109,12 +109,12 @@
- 	. = ALIGN(8);							\
- 	.ARM.unwind_idx : {						\
- 		__start_unwind_idx = .;					\
--		*(.ARM.exidx*)						\
-+		KEEP(*(.ARM.exidx*))					\
- 		__stop_unwind_idx = .;					\
- 	}								\
- 	.ARM.unwind_tab : {						\
- 		__start_unwind_tab = .;					\
--		*(.ARM.extab*)						\
-+		KEEP(*(.ARM.extab*))					\
- 		__stop_unwind_tab = .;					\
- 	}
- 
-@@ -126,7 +126,7 @@
- 	__vectors_lma = .;						\
- 	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
- 		.vectors {						\
--			*(.vectors)					\
-+			KEEP(*(.vectors))				\
- 		}							\
- 		.vectors.bhb.loop8 {					\
- 			*(.vectors.bhb.loop8)				\
-@@ -144,7 +144,7 @@
- 									\
- 	__stubs_lma = .;						\
- 	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_lma) {		\
--		*(.stubs)						\
-+		KEEP(*(.stubs))						\
- 	}								\
- 	ARM_LMA(__stubs, .stubs);					\
- 	. = __stubs_lma + SIZEOF(.stubs);				\
diff --git a/target/linux/generic/hack-5.10/221-module_exports.patch b/target/linux/generic/hack-5.10/221-module_exports.patch
deleted file mode 100644
index 8525e76486e9..000000000000
--- a/target/linux/generic/hack-5.10/221-module_exports.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From b14784e7883390c20ed3ff904892255404a5914b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:05:53 +0200
-Subject: add an optional config option for stripping all unnecessary symbol exports from the kernel image
-
-lede-commit: bb5a40c64b7c4f4848509fa0a6625055fc9e66cc
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/asm-generic/vmlinux.lds.h | 18 +++++++++++++++---
- include/linux/export.h            |  9 ++++++++-
- scripts/Makefile.build            |  2 +-
- 3 files changed, 24 insertions(+), 5 deletions(-)
-
---- a/include/asm-generic/vmlinux.lds.h
-+++ b/include/asm-generic/vmlinux.lds.h
-@@ -81,6 +81,16 @@
- #define RO_EXCEPTION_TABLE
- #endif
- 
-+#ifndef SYMTAB_KEEP
-+#define SYMTAB_KEEP KEEP(*(SORT(___ksymtab+*)))
-+#define SYMTAB_KEEP_GPL KEEP(*(SORT(___ksymtab_gpl+*)))
-+#endif
-+
-+#ifndef SYMTAB_DISCARD
-+#define SYMTAB_DISCARD
-+#define SYMTAB_DISCARD_GPL
-+#endif
-+
- /* Align . to a 8 byte boundary equals to maximum function alignment. */
- #define ALIGN_FUNCTION()  . = ALIGN(8)
- 
-@@ -474,14 +484,14 @@
- 	/* Kernel symbol table: Normal symbols */			\
- 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
- 		__start___ksymtab = .;					\
--		KEEP(*(SORT(___ksymtab+*)))				\
-+		SYMTAB_KEEP						\
- 		__stop___ksymtab = .;					\
- 	}								\
- 									\
- 	/* Kernel symbol table: GPL-only symbols */			\
- 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
- 		__start___ksymtab_gpl = .;				\
--		KEEP(*(SORT(___ksymtab_gpl+*)))				\
-+		SYMTAB_KEEP_GPL						\
- 		__stop___ksymtab_gpl = .;				\
- 	}								\
- 									\
-@@ -543,7 +553,7 @@
- 									\
- 	/* Kernel symbol table: strings */				\
-         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
--		*(__ksymtab_strings)					\
-+		*(__ksymtab_strings+*)					\
- 	}								\
- 									\
- 	/* __*init sections */						\
-@@ -1024,6 +1034,8 @@
- 
- #define COMMON_DISCARDS							\
- 	SANITIZER_DISCARDS						\
-+	SYMTAB_DISCARD							\
-+	SYMTAB_DISCARD_GPL						\
- 	*(.discard)							\
- 	*(.discard.*)							\
- 	*(.modinfo)							\
---- a/include/linux/export.h
-+++ b/include/linux/export.h
-@@ -82,6 +82,12 @@ struct kernel_symbol {
- 
- #else
- 
-+#ifdef MODULE
-+#define __EXPORT_SUFFIX(sym)
-+#else
-+#define __EXPORT_SUFFIX(sym) "+" #sym
-+#endif
-+
- /*
-  * For every exported symbol, do the following:
-  *
-@@ -99,7 +105,7 @@ struct kernel_symbol {
- 	extern const char __kstrtab_##sym[];					\
- 	extern const char __kstrtabns_##sym[];					\
- 	__CRC_SYMBOL(sym, sec);							\
--	asm("	.section \"__ksymtab_strings\",\"aMS\",%progbits,1	\n"	\
-+	asm("	.section \"__ksymtab_strings" __EXPORT_SUFFIX(sym) "\",\"aMS\",%progbits,1	\n"	\
- 	    "__kstrtab_" #sym ":					\n"	\
- 	    "	.asciz 	\"" #sym "\"					\n"	\
- 	    "__kstrtabns_" #sym ":					\n"	\
---- a/include/asm-generic/export.h
-+++ b/include/asm-generic/export.h
-@@ -26,6 +26,12 @@
- #endif
- .endm
- 
-+#ifdef MODULE
-+#define __EXPORT_SUFFIX(name)
-+#else
-+#define __EXPORT_SUFFIX(name) + #name
-+#endif
-+
- /*
-  * note on .section use: we specify progbits since usage of the "M" (SHF_MERGE)
-  * section flag requires it. Use '%progbits' instead of '@progbits' since the
-@@ -39,7 +45,7 @@
- __ksymtab_\name:
- 	__put \val, __kstrtab_\name
- 	.previous
--	.section __ksymtab_strings,"aMS",%progbits,1
-+	.section __ksymtab_strings __EXPORT_SUFFIX(name),"aMS",%progbits,1
- __kstrtab_\name:
- 	.asciz "\name"
- 	.previous
---- a/scripts/Makefile.build
-+++ b/scripts/Makefile.build
-@@ -373,7 +373,7 @@ targets += $(lib-y) $(always-y) $(MAKECM
- # Linker scripts preprocessor (.lds.S -> .lds)
- # ---------------------------------------------------------------------------
- quiet_cmd_cpp_lds_S = LDS     $@
--      cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
-+      cmd_cpp_lds_S = $(CPP) $(EXTRA_LDSFLAGS) $(cpp_flags) -P -U$(ARCH) \
- 	                     -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
- 
- $(obj)/%.lds: $(src)/%.lds.S FORCE
diff --git a/target/linux/generic/hack-5.10/230-openwrt_lzma_options.patch b/target/linux/generic/hack-5.10/230-openwrt_lzma_options.patch
deleted file mode 100644
index 906527faf9a2..000000000000
--- a/target/linux/generic/hack-5.10/230-openwrt_lzma_options.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From b3d00b452467f621317953d9e4c6f9ae8dcfd271 Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Fri, 7 Jul 2017 17:06:55 +0200
-Subject: use the openwrt lzma options for now
-
-lede-commit: 548de949f392049420a6a1feeef118b30ab8ea8c
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- lib/decompress.c              |  1 +
- scripts/Makefile.lib          |  2 +-
- usr/gen_initramfs_list.sh | 10 +++++-----
- 3 files changed, 7 insertions(+), 6 deletions(-)
-
---- a/lib/decompress.c
-+++ b/lib/decompress.c
-@@ -53,6 +53,7 @@ static const struct compress_format comp
- 	{ {0x1f, 0x9e}, "gzip", gunzip },
- 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
- 	{ {0x5d, 0x00}, "lzma", unlzma },
-+	{ {0x6d, 0x00}, "lzma-openwrt", unlzma },
- 	{ {0xfd, 0x37}, "xz", unxz },
- 	{ {0x89, 0x4c}, "lzo", unlzo },
- 	{ {0x02, 0x21}, "lz4", unlz4 },
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -370,7 +370,7 @@ quiet_cmd_bzip2 = BZIP2   $@
- # ---------------------------------------------------------------------------
- 
- quiet_cmd_lzma = LZMA    $@
--      cmd_lzma = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@
-+      cmd_lzma = { cat $(real-prereqs) | $(LZMA) e -d20 -lc1 -lp2 -pb2 -eos -si -so; $(size_append); } > $@
- 
- quiet_cmd_lzo = LZO     $@
-       cmd_lzo = { cat $(real-prereqs) | $(KLZOP) -9; $(size_append); } > $@
diff --git a/target/linux/generic/hack-5.10/250-netfilter_depends.patch b/target/linux/generic/hack-5.10/250-netfilter_depends.patch
deleted file mode 100644
index ec0185495833..000000000000
--- a/target/linux/generic/hack-5.10/250-netfilter_depends.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: hack: net: remove bogus netfilter dependencies
-
-lede-commit: 589d2a377dee27d206fc3725325309cf649e4df6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/Kconfig | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -227,7 +227,6 @@ config NF_CONNTRACK_FTP
- 
- config NF_CONNTRACK_H323
- 	tristate "H.323 protocol support"
--	depends on IPV6 || IPV6=n
- 	depends on NETFILTER_ADVANCED
- 	help
- 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
-@@ -1071,7 +1070,6 @@ config NETFILTER_XT_TARGET_SECMARK
- 
- config NETFILTER_XT_TARGET_TCPMSS
- 	tristate '"TCPMSS" target support'
--	depends on IPV6 || IPV6=n
- 	default m if NETFILTER_ADVANCED=n
- 	help
- 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/hack-5.10/251-kconfig.patch b/target/linux/generic/hack-5.10/251-kconfig.patch
deleted file mode 100644
index d692d137f15b..000000000000
--- a/target/linux/generic/hack-5.10/251-kconfig.patch
+++ /dev/null
@@ -1,210 +0,0 @@
-From da3c50704f14132f4adf80d48e9a4cd5d46e54c9 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 7 Jul 2017 17:09:21 +0200
-Subject: kconfig: owrt specifc dependencies
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- crypto/Kconfig        | 10 +++++-----
- drivers/bcma/Kconfig  |  1 +
- drivers/ssb/Kconfig   |  3 ++-
- lib/Kconfig           |  8 ++++----
- net/netfilter/Kconfig |  2 +-
- net/wireless/Kconfig  | 17 ++++++++++-------
- sound/core/Kconfig    |  4 ++--
- 7 files changed, 25 insertions(+), 20 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -34,7 +34,7 @@ config CRYPTO_FIPS
- 	  this is.
- 
- config CRYPTO_ALGAPI
--	tristate
-+	tristate "ALGAPI"
- 	select CRYPTO_ALGAPI2
- 	help
- 	  This option provides the API for cryptographic algorithms.
-@@ -43,7 +43,7 @@ config CRYPTO_ALGAPI2
- 	tristate
- 
- config CRYPTO_AEAD
--	tristate
-+	tristate "AEAD"
- 	select CRYPTO_AEAD2
- 	select CRYPTO_ALGAPI
- 
-@@ -54,7 +54,7 @@ config CRYPTO_AEAD2
- 	select CRYPTO_RNG2
- 
- config CRYPTO_SKCIPHER
--	tristate
-+	tristate "SKCIPHER"
- 	select CRYPTO_SKCIPHER2
- 	select CRYPTO_ALGAPI
- 
-@@ -64,7 +64,7 @@ config CRYPTO_SKCIPHER2
- 	select CRYPTO_RNG2
- 
- config CRYPTO_HASH
--	tristate
-+	tristate "HASH"
- 	select CRYPTO_HASH2
- 	select CRYPTO_ALGAPI
- 
-@@ -73,7 +73,7 @@ config CRYPTO_HASH2
- 	select CRYPTO_ALGAPI2
- 
- config CRYPTO_RNG
--	tristate
-+	tristate "RNG"
- 	select CRYPTO_RNG2
- 	select CRYPTO_ALGAPI
- 
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -16,6 +16,7 @@ if BCMA
- # Support for Block-I/O. SELECT this from the driver that needs it.
- config BCMA_BLOCKIO
- 	bool
-+	default y
- 
- config BCMA_HOST_PCI_POSSIBLE
- 	bool
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -29,6 +29,7 @@ config SSB_SPROM
- config SSB_BLOCKIO
- 	bool
- 	depends on SSB
-+	default y
- 
- config SSB_PCIHOST_POSSIBLE
- 	bool
-@@ -49,7 +50,7 @@ config SSB_PCIHOST
- config SSB_B43_PCI_BRIDGE
- 	bool
- 	depends on SSB_PCIHOST
--	default n
-+	default y
- 
- config SSB_PCMCIAHOST_POSSIBLE
- 	bool
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -423,16 +423,16 @@ config BCH_CONST_T
- # Textsearch support is select'ed if needed
- #
- config TEXTSEARCH
--	bool
-+	bool "Textsearch support"
- 
- config TEXTSEARCH_KMP
--	tristate
-+	tristate "Textsearch KMP"
- 
- config TEXTSEARCH_BM
--	tristate
-+	tristate "Textsearch BM"
- 
- config TEXTSEARCH_FSM
--	tristate
-+	tristate "Textsearch FSM"
- 
- config BTREE
- 	bool
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -11,7 +11,7 @@ config NETFILTER_INGRESS
- 	  infrastructure.
- 
- config NETFILTER_NETLINK
--	tristate
-+	tristate "Netfilter NFNETLINK interface"
- 
- config NETFILTER_FAMILY_BRIDGE
- 	bool
---- a/net/wireless/Kconfig
-+++ b/net/wireless/Kconfig
-@@ -1,6 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0-only
- config WIRELESS_EXT
--	bool
-+	bool "Wireless extensions"
- 
- config WEXT_CORE
- 	def_bool y
-@@ -12,10 +12,10 @@ config WEXT_PROC
- 	depends on WEXT_CORE
- 
- config WEXT_SPY
--	bool
-+	bool "WEXT_SPY"
- 
- config WEXT_PRIV
--	bool
-+	bool "WEXT_PRIV"
- 
- config CFG80211
- 	tristate "cfg80211 - wireless configuration API"
-@@ -204,7 +204,7 @@ config CFG80211_WEXT_EXPORT
- endif # CFG80211
- 
- config LIB80211
--	tristate
-+	tristate "LIB80211"
- 	default n
- 	help
- 	  This options enables a library of common routines used
-@@ -213,17 +213,17 @@ config LIB80211
- 	  Drivers should select this themselves if needed.
- 
- config LIB80211_CRYPT_WEP
--	tristate
-+	tristate "LIB80211_CRYPT_WEP"
- 	select CRYPTO_LIB_ARC4
- 
- config LIB80211_CRYPT_CCMP
--	tristate
-+	tristate "LIB80211_CRYPT_CCMP"
- 	select CRYPTO
- 	select CRYPTO_AES
- 	select CRYPTO_CCM
- 
- config LIB80211_CRYPT_TKIP
--	tristate
-+	tristate "LIB80211_CRYPT_TKIP"
- 	select CRYPTO_LIB_ARC4
- 
- config LIB80211_DEBUG
---- a/sound/core/Kconfig
-+++ b/sound/core/Kconfig
-@@ -17,7 +17,7 @@ config SND_DMAENGINE_PCM
- 	tristate
- 
- config SND_HWDEP
--	tristate
-+	tristate "Sound hardware support"
- 
- config SND_SEQ_DEVICE
- 	tristate
-@@ -27,7 +27,7 @@ config SND_RAWMIDI
- 	select SND_SEQ_DEVICE if SND_SEQUENCER != n
- 
- config SND_COMPRESS_OFFLOAD
--	tristate
-+	tristate "Compression offloading support"
- 
- config SND_JACK
- 	bool
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -436,7 +436,7 @@ config NET_DEVLINK
- 	default n
- 
- config PAGE_POOL
--	bool
-+	bool "Page pool support"
- 
- config FAILOVER
- 	tristate "Generic failover module"
diff --git a/target/linux/generic/hack-5.10/253-ksmbd-config.patch b/target/linux/generic/hack-5.10/253-ksmbd-config.patch
deleted file mode 100644
index 6fb9de3b050f..000000000000
--- a/target/linux/generic/hack-5.10/253-ksmbd-config.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Rosen Penev <rosenp@gmail.com>
-Subject: Kconfig: add help text to kernel config
-
-These options will be used for ksmbd. Once kernel 5.15
-makes it in, this patch can go away.
-
-Submitted-by: Rosen Penev <rosenp@gmail.com>
----
- init/Kconfig | 2 +-
- lib/Kconfig  | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -2396,7 +2396,7 @@ config PADATA
- 	bool
- 
- config ASN1
--	tristate
-+	tristate "ASN1"
- 	help
- 	  Build a simple ASN.1 grammar compiler that produces a bytecode output
- 	  that can be interpreted by the ASN.1 stream decoder and used to
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -594,7 +594,7 @@ config LIBFDT
- 	bool
- 
- config OID_REGISTRY
--	tristate
-+	tristate "OID"
- 	help
- 	  Enable fast lookup object identifier registry.
- 
diff --git a/target/linux/generic/hack-5.10/259-regmap_dynamic.patch b/target/linux/generic/hack-5.10/259-regmap_dynamic.patch
deleted file mode 100644
index bc81a7285c00..000000000000
--- a/target/linux/generic/hack-5.10/259-regmap_dynamic.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From 811d9e2268a62b830cfe93cd8bc929afcb8b198b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 21:12:38 +0200
-Subject: kernel: move regmap bloat out of the kernel image if it is only being used in modules
-
-lede-commit: 96f39119815028073583e4fca3a9c5fe9141e998
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/base/regmap/Kconfig  | 15 ++++++++++-----
- drivers/base/regmap/Makefile | 12 ++++++++----
- drivers/base/regmap/regmap.c |  3 +++
- include/linux/regmap.h       |  2 +-
- 4 files changed, 22 insertions(+), 10 deletions(-)
-
---- a/drivers/base/regmap/Kconfig
-+++ b/drivers/base/regmap/Kconfig
-@@ -4,9 +4,8 @@
- # subsystems should select the appropriate symbols.
- 
- config REGMAP
--	default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_SOUNDWIRE || REGMAP_SCCB || REGMAP_I3C || REGMAP_SPI_AVMM)
- 	select IRQ_DOMAIN if REGMAP_IRQ
--	bool
-+	tristate
- 
- config REGCACHE_COMPRESSED
- 	select LZO_COMPRESS
-@@ -14,46 +13,59 @@ config REGCACHE_COMPRESSED
- 	bool
- 
- config REGMAP_AC97
-+	select REGMAP
- 	tristate
- 
- config REGMAP_I2C
- 	tristate
-+	select REGMAP
- 	depends on I2C
- 
- config REGMAP_SLIMBUS
- 	tristate
-+	select REGMAP
- 	depends on SLIMBUS
- 
- config REGMAP_SPI
- 	tristate
-+	select REGMAP
-+	depends on SPI_MASTER
- 	depends on SPI
- 
- config REGMAP_SPMI
- 	tristate
-+	select REGMAP
- 	depends on SPMI
- 
- config REGMAP_W1
- 	tristate
-+	select REGMAP
- 	depends on W1
- 
- config REGMAP_MMIO
- 	tristate
-+	select REGMAP
- 
- config REGMAP_IRQ
- 	bool
-+	select REGMAP
- 
- config REGMAP_SOUNDWIRE
- 	tristate
-+	select REGMAP
- 	depends on SOUNDWIRE
- 
- config REGMAP_SCCB
- 	tristate
-+	select REGMAP
- 	depends on I2C
- 
- config REGMAP_I3C
- 	tristate
-+	select REGMAP
- 	depends on I3C
- 
- config REGMAP_SPI_AVMM
- 	tristate
-+	select REGMAP
- 	depends on SPI
---- a/drivers/base/regmap/Makefile
-+++ b/drivers/base/regmap/Makefile
-@@ -2,10 +2,14 @@
- # For include/trace/define_trace.h to include trace.h
- CFLAGS_regmap.o := -I$(src)
- 
--obj-$(CONFIG_REGMAP) += regmap.o regcache.o
--obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o
--obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o
--obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
-+regmap-core-objs = regmap.o regcache.o regcache-rbtree.o regcache-flat.o
-+ifdef CONFIG_DEBUG_FS
-+regmap-core-objs += regmap-debugfs.o
-+endif
-+ifdef CONFIG_REGCACHE_COMPRESSED
-+regmap-core-objs += regcache-lzo.o
-+endif
-+obj-$(CONFIG_REGMAP) += regmap-core.o
- obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o
- obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
- obj-$(CONFIG_REGMAP_SLIMBUS) += regmap-slimbus.o
---- a/drivers/base/regmap/regmap.c
-+++ b/drivers/base/regmap/regmap.c
-@@ -9,6 +9,7 @@
- #include <linux/device.h>
- #include <linux/slab.h>
- #include <linux/export.h>
-+#include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/err.h>
- #include <linux/property.h>
-@@ -3298,3 +3299,5 @@ static int __init regmap_initcall(void)
- 	return 0;
- }
- postcore_initcall(regmap_initcall);
-+
-+MODULE_LICENSE("GPL");
---- a/include/linux/regmap.h
-+++ b/include/linux/regmap.h
-@@ -179,7 +179,7 @@ struct reg_sequence {
- 	__ret ?: __tmp; \
- })
- 
--#ifdef CONFIG_REGMAP
-+#if IS_REACHABLE(CONFIG_REGMAP)
- 
- enum regmap_endian {
- 	/* Unspecified -> 0 -> Backwards compatible default */
diff --git a/target/linux/generic/hack-5.10/260-crypto_test_dependencies.patch b/target/linux/generic/hack-5.10/260-crypto_test_dependencies.patch
deleted file mode 100644
index 3ccf67b23ece..000000000000
--- a/target/linux/generic/hack-5.10/260-crypto_test_dependencies.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From fd1799b0bf5efa46dd3e6dfbbf3955564807e508 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:12:51 +0200
-Subject: kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run
-
-Reduces kernel size after LZMA by about 5k on MIPS
-
-lede-commit: 044c316167e076479a344c59905e5b435b84a77f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- crypto/Kconfig   | 13 ++++++-------
- crypto/algboss.c |  4 ++++
- 2 files changed, 10 insertions(+), 7 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -121,13 +121,13 @@ config CRYPTO_MANAGER
- 	  cbc(aes).
- 
- config CRYPTO_MANAGER2
--	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
--	select CRYPTO_AEAD2
--	select CRYPTO_HASH2
--	select CRYPTO_SKCIPHER2
--	select CRYPTO_AKCIPHER2
--	select CRYPTO_KPP2
--	select CRYPTO_ACOMP2
-+	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y && !CRYPTO_MANAGER_DISABLE_TESTS)
-+	select CRYPTO_AEAD2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_HASH2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_SKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_AKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_KPP2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_ACOMP2 if !CRYPTO_MANAGER_DISABLE_TESTS
- 
- config CRYPTO_USER
- 	tristate "Userspace cryptographic algorithm configuration"
---- a/crypto/algboss.c
-+++ b/crypto/algboss.c
-@@ -230,8 +230,12 @@ static int cryptomgr_schedule_test(struc
- 	type = alg->cra_flags;
- 
- 	/* Do not test internal algorithms. */
-+#ifdef CONFIG_CRYPTO_MANAGER_DISABLE_TESTS
-+	type |= CRYPTO_ALG_TESTED;
-+#else
- 	if (type & CRYPTO_ALG_INTERNAL)
- 		type |= CRYPTO_ALG_TESTED;
-+#endif
- 
- 	param->type = type;
- 
diff --git a/target/linux/generic/hack-5.10/261-lib-arc4-unhide.patch b/target/linux/generic/hack-5.10/261-lib-arc4-unhide.patch
deleted file mode 100644
index b61dd269a42e..000000000000
--- a/target/linux/generic/hack-5.10/261-lib-arc4-unhide.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Subject: crypto: arc4 unhide
-
-This makes it possible to select CONFIG_CRYPTO_LIB_ARC4 directly. We 
-need this to be able to compile this into the kernel and make use of it 
-from backports.
-
-Submitted-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Submitted-by: David Bauer <mail@david-bauer.net>
-Submitted-by: Christian Lamparter <chunkeey@gmail.com>
-Submitted-by: Ansuel Smith <ansuelsmth@gmail.com>
-Submitted-by: Robert Marko <robimarko@gmail.com>
-Submitted-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- lib/crypto/Kconfig                            |   2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -6,7 +6,7 @@ config CRYPTO_LIB_AES
- 	tristate
- 
- config CRYPTO_LIB_ARC4
--	tristate
-+	tristate "ARC4 cipher library"
- 
- config CRYPTO_ARCH_HAVE_LIB_BLAKE2S
- 	bool
diff --git a/target/linux/generic/hack-5.10/280-rfkill-stubs.patch b/target/linux/generic/hack-5.10/280-rfkill-stubs.patch
deleted file mode 100644
index 2e48aea1cfb8..000000000000
--- a/target/linux/generic/hack-5.10/280-rfkill-stubs.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 236c1acdfef5958010ac9814a9872e0a46fd78ee Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 7 Jul 2017 17:13:44 +0200
-Subject: rfkill: add fake rfkill support
-
-allow building of modules depending on RFKILL even if RFKILL is not enabled.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- include/linux/rfkill.h |  2 +-
- net/Makefile           |  2 +-
- net/rfkill/Kconfig     | 14 +++++++++-----
- net/rfkill/Makefile    |  2 +-
- 4 files changed, 12 insertions(+), 8 deletions(-)
-
---- a/include/linux/rfkill.h
-+++ b/include/linux/rfkill.h
-@@ -64,7 +64,7 @@ struct rfkill_ops {
- 	int	(*set_block)(void *data, bool blocked);
- };
- 
--#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-+#if defined(CONFIG_RFKILL_FULL) || defined(CONFIG_RFKILL_FULL_MODULE)
- /**
-  * rfkill_alloc - Allocate rfkill structure
-  * @name: name of the struct -- the string is not copied internally
---- a/net/Makefile
-+++ b/net/Makefile
-@@ -53,7 +53,7 @@ obj-$(CONFIG_TIPC)		+= tipc/
- obj-$(CONFIG_NETLABEL)		+= netlabel/
- obj-$(CONFIG_IUCV)		+= iucv/
- obj-$(CONFIG_SMC)		+= smc/
--obj-$(CONFIG_RFKILL)		+= rfkill/
-+obj-$(CONFIG_RFKILL_FULL)	+= rfkill/
- obj-$(CONFIG_NET_9P)		+= 9p/
- obj-$(CONFIG_CAIF)		+= caif/
- ifneq ($(CONFIG_DCB),)
---- a/net/rfkill/Kconfig
-+++ b/net/rfkill/Kconfig
-@@ -2,7 +2,11 @@
- #
- # RF switch subsystem configuration
- #
--menuconfig RFKILL
-+config RFKILL
-+	bool
-+	default y
-+
-+menuconfig RFKILL_FULL
- 	tristate "RF switch subsystem support"
- 	help
- 	  Say Y here if you want to have control over RF switches
-@@ -14,19 +18,19 @@ menuconfig RFKILL
- # LED trigger support
- config RFKILL_LEDS
- 	bool
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS
- 	default y
- 
- config RFKILL_INPUT
- 	bool "RF switch input support" if EXPERT
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on INPUT = y || RFKILL = INPUT
- 	default y if !EXPERT
- 
- config RFKILL_GPIO
- 	tristate "GPIO RFKILL driver"
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on GPIOLIB || COMPILE_TEST
- 	default n
- 	help
---- a/net/rfkill/Makefile
-+++ b/net/rfkill/Makefile
-@@ -5,5 +5,5 @@
- 
- rfkill-y			+= core.o
- rfkill-$(CONFIG_RFKILL_INPUT)	+= input.o
--obj-$(CONFIG_RFKILL)		+= rfkill.o
-+obj-$(CONFIG_RFKILL_FULL)	+= rfkill.o
- obj-$(CONFIG_RFKILL_GPIO)	+= rfkill-gpio.o
diff --git a/target/linux/generic/hack-5.10/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch b/target/linux/generic/hack-5.10/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
deleted file mode 100644
index fe89de7e08d9..000000000000
--- a/target/linux/generic/hack-5.10/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
-Date: Fri, 7 Jun 2013 18:35:22 -0500
-Subject: MIPS: r4k_cache: use more efficient cache blast
-
-Optimize the compiler output for larger cache blast cases that are
-common for DMA-based networking.
-
-Signed-off-by: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -296,14 +296,46 @@ static inline void prot##extra##blast_##
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
-+	unsigned long lsize_2 = lsize * 2;				\
-+	unsigned long lsize_3 = lsize * 3;				\
-+	unsigned long lsize_4 = lsize * 4;				\
-+	unsigned long lsize_5 = lsize * 5;				\
-+	unsigned long lsize_6 = lsize * 6;				\
-+	unsigned long lsize_7 = lsize * 7;				\
-+	unsigned long lsize_8 = lsize * 8;				\
- 	unsigned long addr = start & ~(lsize - 1);			\
--	unsigned long aend = (end - 1) & ~(lsize - 1);			\
-+	unsigned long aend = (end + lsize - 1) & ~(lsize - 1);		\
-+	int lines = (aend - addr) / lsize;				\
- 									\
--	while (1) {							\
-+	while (lines >= 8) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		prot##cache_op(hitop, addr + lsize_2);			\
-+		prot##cache_op(hitop, addr + lsize_3);			\
-+		prot##cache_op(hitop, addr + lsize_4);			\
-+		prot##cache_op(hitop, addr + lsize_5);			\
-+		prot##cache_op(hitop, addr + lsize_6);			\
-+		prot##cache_op(hitop, addr + lsize_7);			\
-+		addr += lsize_8;					\
-+		lines -= 8;						\
-+	}								\
-+									\
-+	if (lines & 0x4) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		prot##cache_op(hitop, addr + lsize_2);			\
-+		prot##cache_op(hitop, addr + lsize_3);			\
-+		addr += lsize_4;					\
-+	}								\
-+									\
-+	if (lines & 0x2) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		addr += lsize_2;					\
-+	}								\
-+									\
-+	if (lines & 0x1) {						\
- 		prot##cache_op(hitop, addr);				\
--		if (addr == aend)					\
--			break;						\
--		addr += lsize;						\
- 	}								\
- }
- 
diff --git a/target/linux/generic/hack-5.10/321-powerpc_crtsavres_prereq.patch b/target/linux/generic/hack-5.10/321-powerpc_crtsavres_prereq.patch
deleted file mode 100644
index c4fd475b1f57..000000000000
--- a/target/linux/generic/hack-5.10/321-powerpc_crtsavres_prereq.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 107c0964cb8db7ca28ac5199426414fdab3c274d Mon Sep 17 00:00:00 2001
-From: "Alexandros C. Couloumbis" <alex@ozo.com>
-Date: Fri, 7 Jul 2017 17:14:51 +0200
-Subject: hack: arch: powerpc: drop register save/restore library from modules
-
-Upstream GCC uses a libgcc function for saving/restoring registers. This
-makes the code bigger, and upstream kernels need to carry that function
-for every single kernel module. Our GCC is patched to avoid those
-references, so we can drop the extra bloat for modules.
-
-lede-commit: e8e1084654f50904e6bf77b70b2de3f137d7b3ec
-Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
----
- arch/powerpc/Makefile | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/powerpc/Makefile
-+++ b/arch/powerpc/Makefile
-@@ -44,19 +44,6 @@ machine-$(CONFIG_PPC64) += 64
- machine-$(CONFIG_CPU_LITTLE_ENDIAN) += le
- UTS_MACHINE := $(subst $(space),,$(machine-y))
- 
--# XXX This needs to be before we override LD below
--ifdef CONFIG_PPC32
--KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
--else
--ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
--# Have the linker provide sfpr if possible.
--# There is a corresponding test in arch/powerpc/lib/Makefile
--KBUILD_LDFLAGS_MODULE += --save-restore-funcs
--else
--KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
--endif
--endif
--
- ifdef CONFIG_CPU_LITTLE_ENDIAN
- KBUILD_CFLAGS	+= -mlittle-endian
- KBUILD_LDFLAGS	+= -EL
diff --git a/target/linux/generic/hack-5.10/401-mtd-super-don-t-reply-on-mtdblock-device-minor.patch b/target/linux/generic/hack-5.10/401-mtd-super-don-t-reply-on-mtdblock-device-minor.patch
deleted file mode 100644
index 04cf52b09650..000000000000
--- a/target/linux/generic/hack-5.10/401-mtd-super-don-t-reply-on-mtdblock-device-minor.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From f9760b158f610b1792a222cc924073724c061bfb Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 7 Apr 2021 22:37:57 +0100
-Subject: [PATCH 1/2] mtd: super: don't reply on mtdblock device minor
-To: linux-mtd@lists.infradead.org
-Cc: Vignesh Raghavendra <vigneshr@ti.com>,
-    Richard Weinberger <richard@nod.at>,
-    Miquel Raynal <miquel.raynal@bootlin.com>,
-    David Woodhouse <dwmw2@infradead.org>
-
-For blktrans devices with partitions (ie. part_bits != 0) the
-assumption that the minor number of the mtdblock device matches
-the mtdnum doesn't hold true.
-Properly resolve mtd device from blktrans layer instead.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/mtdsuper.c | 33 ++++++++++++++++++++++++++-------
- 1 file changed, 26 insertions(+), 7 deletions(-)
-
---- a/drivers/mtd/mtdsuper.c
-+++ b/drivers/mtd/mtdsuper.c
-@@ -9,6 +9,7 @@
-  */
- 
- #include <linux/mtd/super.h>
-+#include <linux/mtd/blktrans.h>
- #include <linux/namei.h>
- #include <linux/export.h>
- #include <linux/ctype.h>
-@@ -121,7 +122,8 @@ int get_tree_mtd(struct fs_context *fc,
- {
- #ifdef CONFIG_BLOCK
- 	struct block_device *bdev;
--	int ret, major;
-+	struct mtd_blktrans_dev *blktrans_dev;
-+	int ret, major, part_bits;
- #endif
- 	int mtdnr;
- 
-@@ -169,21 +171,38 @@ int get_tree_mtd(struct fs_context *fc,
- 	/* try the old way - the hack where we allowed users to mount
- 	 * /dev/mtdblock$(n) but didn't actually _use_ the blockdev
- 	 */
--	bdev = lookup_bdev(fc->source);
-+	bdev = blkdev_get_by_path(fc->source, FMODE_READ, NULL);
- 	if (IS_ERR(bdev)) {
- 		ret = PTR_ERR(bdev);
- 		errorf(fc, "MTD: Couldn't look up '%s': %d", fc->source, ret);
- 		return ret;
- 	}
--	pr_debug("MTDSB: lookup_bdev() returned 0\n");
-+	pr_debug("MTDSB: blkdev_get_by_path() returned 0\n");
- 
- 	major = MAJOR(bdev->bd_dev);
--	mtdnr = MINOR(bdev->bd_dev);
--	bdput(bdev);
- 
--	if (major == MTD_BLOCK_MAJOR)
--		return mtd_get_sb_by_nr(fc, mtdnr, fill_super);
-+	if (major == MTD_BLOCK_MAJOR) {
-+		if (!bdev->bd_disk) {
-+			blkdev_put(bdev, FMODE_READ);
-+			BUG();
-+			return -EINVAL;
-+		}
-+
-+		blktrans_dev = (struct mtd_blktrans_dev *)(bdev->bd_disk->private_data);
-+		if (!blktrans_dev || !blktrans_dev->tr) {
-+			blkdev_put(bdev, FMODE_READ);
-+			BUG();
-+			return -EINVAL;
-+		}
-+		mtdnr = blktrans_dev->devnum;
-+		part_bits = blktrans_dev->tr->part_bits;
-+		blkdev_put(bdev, FMODE_READ);
-+		if (MINOR(bdev->bd_dev) != (mtdnr << part_bits))
-+			return -EINVAL;
- 
-+		return mtd_get_sb_by_nr(fc, mtdnr, fill_super);
-+	}
-+	blkdev_put(bdev, FMODE_READ);
- #endif /* CONFIG_BLOCK */
- 
- 	if (!(fc->sb_flags & SB_SILENT))
diff --git a/target/linux/generic/hack-5.10/402-mtd-blktrans-call-add-disks-after-mtd-device.patch b/target/linux/generic/hack-5.10/402-mtd-blktrans-call-add-disks-after-mtd-device.patch
deleted file mode 100644
index 957c6305d152..000000000000
--- a/target/linux/generic/hack-5.10/402-mtd-blktrans-call-add-disks-after-mtd-device.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 0bccc3722bdd88e8ae995e77ef9f7b77ee4cbdee Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 7 Apr 2021 22:45:54 +0100
-Subject: [PATCH 2/2] mtd: blktrans: call add disks after mtd device
-To: linux-mtd@lists.infradead.org
-Cc: Vignesh Raghavendra <vigneshr@ti.com>,
-    Richard Weinberger <richard@nod.at>,
-    Miquel Raynal <miquel.raynal@bootlin.com>,
-    David Woodhouse <dwmw2@infradead.org>
-
-Calling device_add_disk while holding mtd_table_mutex leads
-to deadlock in case part_bits!=0 as block partition parsers
-will try to open the newly created disks, trying to acquire
-mutex once again.
-Move device_add_disk to additional function called after
-add partitions of an MTD device have been added and locks
-have been released.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/mtd_blkdevs.c    | 33 ++++++++++++++++++++++++++-------
- drivers/mtd/mtdcore.c        |  3 +++
- include/linux/mtd/blktrans.h |  1 +
- 3 files changed, 30 insertions(+), 7 deletions(-)
-
---- a/drivers/mtd/mtd_blkdevs.c
-+++ b/drivers/mtd/mtd_blkdevs.c
-@@ -457,13 +457,6 @@ int add_mtd_blktrans_dev(struct mtd_blkt
- 	if (new->readonly)
- 		set_disk_ro(gd, 1);
- 
--	device_add_disk(&new->mtd->dev, gd, NULL);
--
--	if (new->disk_attributes) {
--		ret = sysfs_create_group(&disk_to_dev(gd)->kobj,
--					new->disk_attributes);
--		WARN_ON(ret);
--	}
- 	return 0;
- error4:
- 	kfree(new->tag_set);
-@@ -475,6 +468,27 @@ error1:
- 	return ret;
- }
- 
-+void register_mtd_blktrans_devs(void)
-+{
-+	struct mtd_blktrans_ops *tr;
-+	struct mtd_blktrans_dev *dev, *next;
-+	int ret;
-+
-+	list_for_each_entry(tr, &blktrans_majors, list) {
-+		list_for_each_entry_safe(dev, next, &tr->devs, list) {
-+			if (dev->disk->flags & GENHD_FL_UP)
-+				continue;
-+
-+			device_add_disk(&dev->mtd->dev, dev->disk, NULL);
-+			if (dev->disk_attributes) {
-+				ret = sysfs_create_group(&disk_to_dev(dev->disk)->kobj,
-+							dev->disk_attributes);
-+				WARN_ON(ret);
-+			}
-+		}
-+	}
-+}
-+
- int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
- {
- 	unsigned long flags;
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -32,6 +32,7 @@
- 
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/mtd/blktrans.h>
- 
- #include "mtdcore.h"
- 
-@@ -930,6 +931,8 @@ int mtd_device_parse_register(struct mtd
- 		register_reboot_notifier(&mtd->reboot_notifier);
- 	}
- 
-+	register_mtd_blktrans_devs();
-+
- out:
- 	if (ret && device_is_registered(&mtd->dev))
- 		del_mtd_device(mtd);
---- a/include/linux/mtd/blktrans.h
-+++ b/include/linux/mtd/blktrans.h
-@@ -76,6 +76,6 @@ extern int deregister_mtd_blktrans(struc
- extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
- extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
- extern int mtd_blktrans_cease_background(struct mtd_blktrans_dev *dev);
--
-+extern void register_mtd_blktrans_devs(void);
- 
- #endif /* __MTD_TRANS_H__ */
diff --git a/target/linux/generic/hack-5.10/410-block-fit-partition-parser.patch b/target/linux/generic/hack-5.10/410-block-fit-partition-parser.patch
deleted file mode 100644
index 52d8e24d0f37..000000000000
--- a/target/linux/generic/hack-5.10/410-block-fit-partition-parser.patch
+++ /dev/null
@@ -1,251 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: [PATCH] kernel: fix FIT partition parser compatibility issues
-
-The uImage.FIT partition parser used to squeeze in FIT partitions in
-the range where partition editor tools (fdisk and such) expect the
-regular partition. This is confusing people and tools when adding
-additional partitions on top of the partition used for OpenWrt's
-uImage.FIT.
-Instead of squeezing in the additional partitions, rather start with
-all uImage.FIT partitions at offset 64.
-
-Submitted-by: Daniel Golle <daniel@makrotopia.org>
----
- block/blk.h                                            |  2 ++
- block/partitions/Kconfig                               |  7 +++
- block/partitions/Makefile                              |  1 +
- block/partitions/check.h                               |  3 ++
- block/partitions/core.c                                | 15 +++++++
- drivers/mtd/ubi/block.c                                |  7 +++
- block/partitions/efi.c                                 |  8 +++++++
- block/partitions/efi.h                                 |  3 ++
- drivers/mtd/mtdblock.c                                 |  4 +++
- drivers/mtd/mtd_blkdevs.c                              | 14 +------
- block/partitions/msdos.c                               | 10 ++++++
- include/linux/msdos_partition.h                        |  1 +
- 12 files changed, 52 insertions(+), 13 deletions(-)
-
---- a/block/blk.h
-+++ b/block/blk.h
-@@ -361,6 +361,8 @@ char *disk_name(struct gendisk *hd, int
- #define ADDPART_FLAG_NONE	0
- #define ADDPART_FLAG_RAID	1
- #define ADDPART_FLAG_WHOLEDISK	2
-+#define ADDPART_FLAG_READONLY	4
-+#define ADDPART_FLAG_ROOTDEV	8
- void delete_partition(struct hd_struct *part);
- int bdev_add_partition(struct block_device *bdev, int partno,
- 		sector_t start, sector_t length);
---- a/block/partitions/Kconfig
-+++ b/block/partitions/Kconfig
-@@ -101,6 +101,13 @@ config ATARI_PARTITION
- 	  Say Y here if you would like to use hard disks under Linux which
- 	  were partitioned under the Atari OS.
- 
-+config FIT_PARTITION
-+	bool "Flattened-Image-Tree (FIT) partition support" if PARTITION_ADVANCED
-+	default n
-+	help
-+	  Say Y here if your system needs to mount the filesystem part of
-+	  a Flattened-Image-Tree (FIT) image commonly used with Das U-Boot.
-+
- config IBM_PARTITION
- 	bool "IBM disk label and partition support"
- 	depends on PARTITION_ADVANCED && S390
---- a/block/partitions/Makefile
-+++ b/block/partitions/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_ACORN_PARTITION) += acorn.o
- obj-$(CONFIG_AMIGA_PARTITION) += amiga.o
- obj-$(CONFIG_ATARI_PARTITION) += atari.o
- obj-$(CONFIG_AIX_PARTITION) += aix.o
-+obj-$(CONFIG_FIT_PARTITION) += fit.o
- obj-$(CONFIG_CMDLINE_PARTITION) += cmdline.o
- obj-$(CONFIG_MAC_PARTITION) += mac.o
- obj-$(CONFIG_LDM_PARTITION) += ldm.o
---- a/block/partitions/check.h
-+++ b/block/partitions/check.h
-@@ -58,6 +58,7 @@ int amiga_partition(struct parsed_partit
- int atari_partition(struct parsed_partitions *state);
- int cmdline_partition(struct parsed_partitions *state);
- int efi_partition(struct parsed_partitions *state);
-+int fit_partition(struct parsed_partitions *state);
- int ibm_partition(struct parsed_partitions *);
- int karma_partition(struct parsed_partitions *state);
- int ldm_partition(struct parsed_partitions *state);
-@@ -68,3 +69,5 @@ int sgi_partition(struct parsed_partitio
- int sun_partition(struct parsed_partitions *state);
- int sysv68_partition(struct parsed_partitions *state);
- int ultrix_partition(struct parsed_partitions *state);
-+
-+int parse_fit_partitions(struct parsed_partitions *state, u64 start_sector, u64 nr_sectors, int *slot, int add_remain);
---- a/block/partitions/core.c
-+++ b/block/partitions/core.c
-@@ -10,6 +10,10 @@
- #include <linux/vmalloc.h>
- #include <linux/blktrace_api.h>
- #include <linux/raid/detect.h>
-+#ifdef CONFIG_FIT_PARTITION
-+#include <linux/root_dev.h>
-+#endif
-+
- #include "check.h"
- 
- static int (*check_part[])(struct parsed_partitions *) = {
-@@ -46,6 +50,9 @@ static int (*check_part[])(struct parsed
- #ifdef CONFIG_EFI_PARTITION
- 	efi_partition,		/* this must come before msdos */
- #endif
-+#ifdef CONFIG_FIT_PARTITION
-+	fit_partition,
-+#endif
- #ifdef CONFIG_SGI_PARTITION
- 	sgi_partition,
- #endif
-@@ -701,6 +708,14 @@ static bool blk_add_partition(struct gen
- 	    (state->parts[p].flags & ADDPART_FLAG_RAID))
- 		md_autodetect_dev(part_to_dev(part)->devt);
- 
-+#ifdef CONFIG_FIT_PARTITION
-+	if ((state->parts[p].flags & ADDPART_FLAG_ROOTDEV) && ROOT_DEV == 0)
-+		ROOT_DEV = part_to_dev(part)->devt;
-+
-+	if (state->parts[p].flags & ADDPART_FLAG_READONLY)
-+		part->policy = true;
-+#endif
-+
- 	return true;
- }
- 
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -396,7 +396,11 @@ int ubiblock_create(struct ubi_volume_in
- 	dev->leb_size = vi->usable_leb_size;
- 
- 	/* Initialize the gendisk of this ubiblock device */
-+#ifdef CONFIG_FIT_PARTITION
-+	gd = alloc_disk(0);
-+#else
- 	gd = alloc_disk(1);
-+#endif
- 	if (!gd) {
- 		pr_err("UBI: block: alloc_disk failed\n");
- 		ret = -ENODEV;
-@@ -413,6 +417,9 @@ int ubiblock_create(struct ubi_volume_in
- 		goto out_put_disk;
- 	}
- 	gd->private_data = dev;
-+#ifdef CONFIG_FIT_PARTITION
-+	gd->flags |= GENHD_FL_EXT_DEVT;
-+#endif
- 	sprintf(gd->disk_name, "ubiblock%d_%d", dev->ubi_num, dev->vol_id);
- 	set_capacity(gd, disk_capacity);
- 	dev->gd = gd;
---- a/block/partitions/efi.c
-+++ b/block/partitions/efi.c
-@@ -706,6 +706,9 @@ int efi_partition(struct parsed_partitio
- 	gpt_entry *ptes = NULL;
- 	u32 i;
- 	unsigned ssz = bdev_logical_block_size(state->bdev) / 512;
-+#ifdef CONFIG_FIT_PARTITION
-+	u32 extra_slot = 64;
-+#endif
- 
- 	if (!find_valid_gpt(state, &gpt, &ptes) || !gpt || !ptes) {
- 		kfree(gpt);
-@@ -739,6 +742,11 @@ int efi_partition(struct parsed_partitio
- 				ARRAY_SIZE(ptes[i].partition_name));
- 		utf16_le_to_7bit(ptes[i].partition_name, label_max, info->volname);
- 		state->parts[i + 1].has_info = true;
-+#ifdef CONFIG_FIT_PARTITION
-+		/* If this is a U-Boot FIT volume it may have subpartitions */
-+		if (!efi_guidcmp(ptes[i].partition_type_guid, PARTITION_LINUX_FIT_GUID))
-+			(void) parse_fit_partitions(state, start * ssz, size * ssz, &extra_slot, 1);
-+#endif
- 	}
- 	kfree(ptes);
- 	kfree(gpt);
---- a/block/partitions/efi.h
-+++ b/block/partitions/efi.h
-@@ -52,6 +52,9 @@
- #define PARTITION_LINUX_LVM_GUID \
-     EFI_GUID( 0xe6d6d379, 0xf507, 0x44c2, \
-               0xa2, 0x3c, 0x23, 0x8f, 0x2a, 0x3d, 0xf9, 0x28)
-+#define PARTITION_LINUX_FIT_GUID \
-+    EFI_GUID( 0xcae9be83, 0xb15f, 0x49cc, \
-+              0x86, 0x3f, 0x08, 0x1b, 0x74, 0x4a, 0x2d, 0x93)
- 
- typedef struct _gpt_header {
- 	__le64 signature;
---- a/drivers/mtd/mtdblock.c
-+++ b/drivers/mtd/mtdblock.c
-@@ -338,7 +338,11 @@ static void mtdblock_remove_dev(struct m
- static struct mtd_blktrans_ops mtdblock_tr = {
- 	.name		= "mtdblock",
- 	.major		= MTD_BLOCK_MAJOR,
-+#ifdef CONFIG_FIT_PARTITION
-+	.part_bits	= 2,
-+#else
- 	.part_bits	= 0,
-+#endif
- 	.blksize 	= 512,
- 	.open		= mtdblock_open,
- 	.flush		= mtdblock_flush,
---- a/drivers/mtd/mtd_blkdevs.c
-+++ b/drivers/mtd/mtd_blkdevs.c
-@@ -407,18 +407,8 @@ int add_mtd_blktrans_dev(struct mtd_blkt
- 	gd->first_minor = (new->devnum) << tr->part_bits;
- 	gd->fops = &mtd_block_ops;
- 
--	if (tr->part_bits)
--		if (new->devnum < 26)
--			snprintf(gd->disk_name, sizeof(gd->disk_name),
--				 "%s%c", tr->name, 'a' + new->devnum);
--		else
--			snprintf(gd->disk_name, sizeof(gd->disk_name),
--				 "%s%c%c", tr->name,
--				 'a' - 1 + new->devnum / 26,
--				 'a' + new->devnum % 26);
--	else
--		snprintf(gd->disk_name, sizeof(gd->disk_name),
--			 "%s%d", tr->name, new->devnum);
-+	snprintf(gd->disk_name, sizeof(gd->disk_name),
-+		 "%s%d", tr->name, new->devnum);
- 
- 	set_capacity(gd, ((u64)new->size * tr->blksize) >> 9);
- 
---- a/block/partitions/msdos.c
-+++ b/block/partitions/msdos.c
-@@ -563,6 +563,15 @@ static void parse_minix(struct parsed_pa
- #endif /* CONFIG_MINIX_SUBPARTITION */
- }
- 
-+static void parse_fit_mbr(struct parsed_partitions *state,
-+			  sector_t offset, sector_t size, int origin)
-+{
-+#ifdef CONFIG_FIT_PARTITION
-+	u32 extra_slot = 64;
-+	(void) parse_fit_partitions(state, offset, size, &extra_slot, 1);
-+#endif /* CONFIG_FIT_PARTITION */
-+}
-+
- static struct {
- 	unsigned char id;
- 	void (*parse)(struct parsed_partitions *, sector_t, sector_t, int);
-@@ -574,6 +583,7 @@ static struct {
- 	{UNIXWARE_PARTITION, parse_unixware},
- 	{SOLARIS_X86_PARTITION, parse_solaris_x86},
- 	{NEW_SOLARIS_X86_PARTITION, parse_solaris_x86},
-+	{FIT_PARTITION, parse_fit_mbr},
- 	{0, NULL},
- };
- 
---- a/include/linux/msdos_partition.h
-+++ b/include/linux/msdos_partition.h
-@@ -31,6 +31,7 @@ enum msdos_sys_ind {
- 	LINUX_LVM_PARTITION = 0x8e,
- 	LINUX_RAID_PARTITION = 0xfd,	/* autodetect RAID partition */
- 
-+	FIT_PARTITION = 0x2e,		/* U-Boot uImage.FIT */
- 	SOLARIS_X86_PARTITION =	0x82,	/* also Linux swap partitions */
- 	NEW_SOLARIS_X86_PARTITION = 0xbf,
- 
diff --git a/target/linux/generic/hack-5.10/420-mtd-support-OpenWrt-s-MTD_ROOTFS_ROOT_DEV.patch b/target/linux/generic/hack-5.10/420-mtd-support-OpenWrt-s-MTD_ROOTFS_ROOT_DEV.patch
deleted file mode 100644
index 08e4193c600b..000000000000
--- a/target/linux/generic/hack-5.10/420-mtd-support-OpenWrt-s-MTD_ROOTFS_ROOT_DEV.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 7 Nov 2022 23:48:24 +0100
-Subject: [PATCH] mtd: support OpenWrt's MTD_ROOTFS_ROOT_DEV
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows setting ROOT_DEV to MTD partition named "rootfs".
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -758,7 +758,8 @@ int add_mtd_device(struct mtd_info *mtd)
- 
- 	mutex_unlock(&mtd_table_mutex);
- 
--	if (of_find_property(mtd_get_of_node(mtd), "linux,rootfs", NULL)) {
-+	if (of_find_property(mtd_get_of_node(mtd), "linux,rootfs", NULL) ||
-+	    (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) && !strcmp(mtd->name, "rootfs") && ROOT_DEV == 0)) {
- 		if (IS_BUILTIN(CONFIG_MTD)) {
- 			pr_info("mtd: setting mtd%d (%s) as root device\n", mtd->index, mtd->name);
- 			ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
diff --git a/target/linux/generic/hack-5.10/421-mtd-fix-squashfs-root-on-targets-with-CONFIG_FIT_PAR.patch b/target/linux/generic/hack-5.10/421-mtd-fix-squashfs-root-on-targets-with-CONFIG_FIT_PAR.patch
deleted file mode 100644
index df93c6be6217..000000000000
--- a/target/linux/generic/hack-5.10/421-mtd-fix-squashfs-root-on-targets-with-CONFIG_FIT_PAR.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat Apr 10 17:00:57 2021 +0200
-Subject: [PATCH] mtd: fix squashfs root on targets with CONFIG_FIT_PARTITION
-
-Fix assumption about the block device index
----
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -760,12 +760,18 @@ int add_mtd_device(struct mtd_info *mtd)
- 
- 	if (of_find_property(mtd_get_of_node(mtd), "linux,rootfs", NULL) ||
- 	    (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) && !strcmp(mtd->name, "rootfs") && ROOT_DEV == 0)) {
-+		unsigned int index = mtd->index;
-+
-+#ifdef CONFIG_FIT_PARTITION
-+		index <<= 2;
-+#endif
-+
- 		if (IS_BUILTIN(CONFIG_MTD)) {
--			pr_info("mtd: setting mtd%d (%s) as root device\n", mtd->index, mtd->name);
--			ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
-+			pr_info("mtd: setting mtd%d (%s) as root device\n", index, mtd->name);
-+			ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, index);
- 		} else {
- 			pr_warn("mtd: can't set mtd%d (%s) as root device - mtd must be builtin\n",
--				mtd->index, mtd->name);
-+				index, mtd->name);
- 		}
- 	}
- 
diff --git a/target/linux/generic/hack-5.10/422-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch b/target/linux/generic/hack-5.10/422-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch
deleted file mode 100644
index 965a331a1905..000000000000
--- a/target/linux/generic/hack-5.10/422-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From 6fa9e3678eb002246df1280322b6a024853950a5 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 11 Oct 2021 00:53:14 +0200
-Subject: [PATCH] drivers: mtd: parsers: add nvmem support to cmdlinepart
-
-Assuming cmdlinepart is only one level deep partition scheme and that
-static partition are also defined in DTS, we can assign an of_node for
-partition declared from bootargs. cmdlinepart have priority than
-fiexed-partition parser so in this specific case the parser doesn't
-assign an of_node. Fix this by searching a defined of_node using a
-similar fixed_partition parser and if a partition is found with the same
-label, check that it has the same offset and size and return the DT
-of_node to correctly use NVMEM cells.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/mtd/parsers/cmdlinepart.c | 71 +++++++++++++++++++++++++++++++
- 1 file changed, 71 insertions(+)
-
---- a/drivers/mtd/parsers/cmdlinepart.c
-+++ b/drivers/mtd/parsers/cmdlinepart.c
-@@ -43,6 +43,7 @@
- #include <linux/mtd/partitions.h>
- #include <linux/module.h>
- #include <linux/err.h>
-+#include <linux/of.h>
- 
- /* debug macro */
- #if 0
-@@ -323,6 +324,68 @@ static int mtdpart_setup_real(char *s)
- 	return 0;
- }
- 
-+static int search_fixed_partition(struct mtd_info *master,
-+				  struct mtd_partition *target_part,
-+				  struct mtd_partition *fixed_part)
-+{
-+	struct device_node *mtd_node;
-+	struct device_node *ofpart_node;
-+	struct device_node *pp;
-+	struct mtd_partition part;
-+	const char *partname;
-+
-+	mtd_node = mtd_get_of_node(master);
-+	if (!mtd_node)
-+		return -EINVAL;
-+
-+	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
-+
-+	for_each_child_of_node(ofpart_node,  pp) {
-+		const __be32 *reg;
-+		int len;
-+		int a_cells, s_cells;
-+
-+		reg = of_get_property(pp, "reg", &len);
-+		if (!reg) {
-+			pr_debug("%s: ofpart partition %pOF (%pOF) missing reg property.\n",
-+				 master->name, pp,
-+				 mtd_node);
-+			continue;
-+		}
-+
-+		a_cells = of_n_addr_cells(pp);
-+		s_cells = of_n_size_cells(pp);
-+		if (len / 4 != a_cells + s_cells) {
-+			pr_debug("%s: ofpart partition %pOF (%pOF) error parsing reg property.\n",
-+				 master->name, pp,
-+				 mtd_node);
-+			continue;
-+		}
-+
-+		part.offset = of_read_number(reg, a_cells);
-+		part.size = of_read_number(reg + a_cells, s_cells);
-+		part.of_node = pp;
-+
-+		partname = of_get_property(pp, "label", &len);
-+		if (!partname)
-+			partname = of_get_property(pp, "name", &len);
-+		part.name = partname;
-+
-+		if (!strncmp(target_part->name, part.name, len)) {
-+			if (part.offset != target_part->offset)
-+				return -EINVAL;
-+
-+			if (part.size != target_part->size)
-+				return -EINVAL;
-+
-+			memcpy(fixed_part, &part, sizeof(struct mtd_partition));
-+			return 0;
-+		}
-+	}
-+
-+	return -EINVAL;
-+}
-+
- /*
-  * Main function to be called from the MTD mapping driver/device to
-  * obtain the partitioning information. At this point the command line
-@@ -338,6 +401,7 @@ static int parse_cmdline_partitions(stru
- 	int i, err;
- 	struct cmdline_mtd_partition *part;
- 	const char *mtd_id = master->name;
-+	struct mtd_partition fixed_part;
- 
- 	/* parse command line */
- 	if (!cmdline_parsed) {
-@@ -382,6 +446,13 @@ static int parse_cmdline_partitions(stru
- 				sizeof(*part->parts) * (part->num_parts - i));
- 			i--;
- 		}
-+
-+		err = search_fixed_partition(master, &part->parts[i], &fixed_part);
-+		if (!err) {
-+			part->parts[i].of_node = fixed_part.of_node;
-+			pr_info("Found partition defined in DT for %s. Assigning OF node to support nvmem.",
-+				part->parts[i].name);
-+		}
- 	}
- 
- 	*pparts = kmemdup(part->parts, sizeof(*part->parts) * part->num_parts,
diff --git a/target/linux/generic/hack-5.10/430-mtk-bmt-support.patch b/target/linux/generic/hack-5.10/430-mtk-bmt-support.patch
deleted file mode 100644
index b18df7584da5..000000000000
--- a/target/linux/generic/hack-5.10/430-mtk-bmt-support.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 11425c9de29c8b9c5e4d7eec163a6afbb7fbdce2 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 9 Apr 2020 09:53:24 +0200
-Subject: mediatek: Implement bad-block management table support
-
-Submitted-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/nand/Kconfig                      |   4 ++++
- drivers/mtd/nand/Makefile                     |   1 +
- 2 files changed, 5 insertions(+)
-
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -15,6 +15,10 @@ config MTD_NAND_ECC
-        bool
-        depends on MTD_NAND_CORE
- 
-+config MTD_NAND_MTK_BMT
-+	bool "Support MediaTek NAND Bad-block Management Table"
-+	default n
-+
- endmenu
- 
- endmenu
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -2,6 +2,7 @@
- 
- nandcore-objs := core.o bbt.o
- obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
-+obj-$(CONFIG_MTD_NAND_MTK_BMT)	+= mtk_bmt.o mtk_bmt_v2.o mtk_bmt_bbt.o mtk_bmt_nmbm.o
- 
- obj-y	+= onenand/
- obj-y	+= raw/
diff --git a/target/linux/generic/hack-5.10/600-bridge_offload.patch b/target/linux/generic/hack-5.10/600-bridge_offload.patch
deleted file mode 100644
index 82282627eae1..000000000000
--- a/target/linux/generic/hack-5.10/600-bridge_offload.patch
+++ /dev/null
@@ -1,845 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: bridge: Add a fast path for the bridge code
-
-This caches flows between MAC addresses on separate ports, including their VLAN
-in order to bypass the normal bridge forwarding code.
-In my test on MT7622, this reduces LAN->WLAN bridging CPU usage by 6-10%,
-potentially even more on weaker platforms
-
-Submitted-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/if_bridge.h                     |   1 +
- net/bridge/Makefile                           |   2 +-
- net/bridge/br.c                               |   8 +++
- net/bridge/br_device.c                        |   7 +++
- net/bridge/br_forward.c                       |   3 ++
- net/bridge/br_if.c                            |   7 ++-
- net/bridge/br_input.c                         |   5 ++
- net/bridge/br_offload.c                       | 436 +++++++++++++++
- net/bridge/br_private.h                       |  22 ++++-
- net/bridge/br_private_offload.h               |  21 +++++
- net/bridge/br_stp.c                           |   3 +
- net/bridge/br_sysfs_br.c                      |  35 ++++++
- net/bridge/br_sysfs_if.c                      |   2 +
- net/bridge/br_vlan_tunnel.c                   |   3 ++
- 14 files changed, 552 insertions(+), 3 deletions(-)
- create mode 100644 net/bridge/br_offload.c
- create mode 100644 net/bridge/br_private_offload.h
-
---- a/include/linux/if_bridge.h
-+++ b/include/linux/if_bridge.h
-@@ -57,6 +57,7 @@ struct br_ip_list {
- #define BR_MRP_LOST_CONT	BIT(18)
- #define BR_MRP_LOST_IN_CONT	BIT(19)
- #define BR_BPDU_FILTER		BIT(20)
-+#define BR_OFFLOAD		BIT(21)
- 
- #define BR_DEFAULT_AGEING_TIME	(300 * HZ)
- 
---- a/net/bridge/Makefile
-+++ b/net/bridge/Makefile
-@@ -5,7 +5,7 @@
- 
- obj-$(CONFIG_BRIDGE) += bridge.o
- 
--bridge-y	:= br.o br_device.o br_fdb.o br_forward.o br_if.o br_input.o \
-+bridge-y	:= br.o br_device.o br_fdb.o br_forward.o br_if.o br_input.o br_offload.o \
- 			br_ioctl.o br_stp.o br_stp_bpdu.o \
- 			br_stp_if.o br_stp_timer.o br_netlink.o \
- 			br_netlink_tunnel.o br_arp_nd_proxy.o
---- a/net/bridge/br.c
-+++ b/net/bridge/br.c
-@@ -18,6 +18,7 @@
- #include <net/switchdev.h>
- 
- #include "br_private.h"
-+#include "br_private_offload.h"
- 
- /*
-  * Handle changes in state of network devices enslaved to a bridge.
-@@ -332,6 +333,10 @@ static int __init br_init(void)
- 	if (err)
- 		goto err_out;
- 
-+	err = br_offload_init();
-+	if (err)
-+		goto err_out0;
-+
- 	err = register_pernet_subsys(&br_net_ops);
- 	if (err)
- 		goto err_out1;
-@@ -375,6 +380,8 @@ err_out3:
- err_out2:
- 	unregister_pernet_subsys(&br_net_ops);
- err_out1:
-+	br_offload_fini();
-+err_out0:
- 	br_fdb_fini();
- err_out:
- 	stp_proto_unregister(&br_stp_proto);
-@@ -396,6 +403,7 @@ static void __exit br_deinit(void)
- #if IS_ENABLED(CONFIG_ATM_LANE)
- 	br_fdb_test_addr_hook = NULL;
- #endif
-+	br_offload_fini();
- 	br_fdb_fini();
- }
- 
---- a/net/bridge/br_device.c
-+++ b/net/bridge/br_device.c
-@@ -529,6 +529,8 @@ void br_dev_setup(struct net_device *dev
- 	br->bridge_hello_time = br->hello_time = 2 * HZ;
- 	br->bridge_forward_delay = br->forward_delay = 15 * HZ;
- 	br->bridge_ageing_time = br->ageing_time = BR_DEFAULT_AGEING_TIME;
-+	br->offload_cache_size = 128;
-+	br->offload_cache_reserved = 8;
- 	dev->max_mtu = ETH_MAX_MTU;
- 
- 	br_netfilter_rtable_init(br);
---- a/net/bridge/br_fdb.c
-+++ b/net/bridge/br_fdb.c
-@@ -23,6 +23,7 @@
- #include <net/switchdev.h>
- #include <trace/events/bridge.h>
- #include "br_private.h"
-+#include "br_private_offload.h"
- 
- static const struct rhashtable_params br_fdb_rht_params = {
- 	.head_offset = offsetof(struct net_bridge_fdb_entry, rhnode),
-@@ -513,6 +514,8 @@ static struct net_bridge_fdb_entry *fdb_
- 		fdb->key.vlan_id = vid;
- 		fdb->flags = flags;
- 		fdb->updated = fdb->used = jiffies;
-+		INIT_HLIST_HEAD(&fdb->offload_in);
-+		INIT_HLIST_HEAD(&fdb->offload_out);
- 		if (rhashtable_lookup_insert_fast(&br->fdb_hash_tbl,
- 						  &fdb->rhnode,
- 						  br_fdb_rht_params)) {
-@@ -734,6 +737,8 @@ static void fdb_notify(struct net_bridge
- 	struct sk_buff *skb;
- 	int err = -ENOBUFS;
- 
-+	br_offload_fdb_update(fdb);
-+
- 	if (swdev_notify)
- 		br_switchdev_fdb_notify(br, fdb, type);
- 
---- a/net/bridge/br_forward.c
-+++ b/net/bridge/br_forward.c
-@@ -16,6 +16,7 @@
- #include <linux/if_vlan.h>
- #include <linux/netfilter_bridge.h>
- #include "br_private.h"
-+#include "br_private_offload.h"
- 
- /* Don't forward packets to originating port or forwarding disabled */
- static inline int should_deliver(const struct net_bridge_port *p,
-@@ -32,6 +33,8 @@ static inline int should_deliver(const s
- 
- int br_dev_queue_push_xmit(struct net *net, struct sock *sk, struct sk_buff *skb)
- {
-+	br_offload_output(skb);
-+
- 	skb_push(skb, ETH_HLEN);
- 	if (!is_skb_forwardable(skb->dev, skb))
- 		goto drop;
---- a/net/bridge/br_if.c
-+++ b/net/bridge/br_if.c
-@@ -25,6 +25,7 @@
- #include <net/net_namespace.h>
- 
- #include "br_private.h"
-+#include "br_private_offload.h"
- 
- /*
-  * Determine initial path cost based on speed.
-@@ -427,7 +428,7 @@ static struct net_bridge_port *new_nbp(s
- 	p->path_cost = port_cost(dev);
- 	p->priority = 0x8000 >> BR_PORT_BITS;
- 	p->port_no = index;
--	p->flags = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD;
-+	p->flags = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD | BR_OFFLOAD;
- 	br_init_port(p);
- 	br_set_state(p, BR_STATE_DISABLED);
- 	br_stp_port_timer_init(p);
-@@ -777,6 +778,9 @@ void br_port_flags_change(struct net_bri
- 
- 	if (mask & BR_NEIGH_SUPPRESS)
- 		br_recalculate_neigh_suppress_enabled(br);
-+
-+	if (mask & BR_OFFLOAD)
-+		br_offload_port_state(p);
- }
- 
- bool br_port_flag_is_set(const struct net_device *dev, unsigned long flag)
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -22,6 +22,7 @@
- #include <linux/rculist.h>
- #include "br_private.h"
- #include "br_private_tunnel.h"
-+#include "br_private_offload.h"
- 
- static int
- br_netif_receive_skb(struct net *net, struct sock *sk, struct sk_buff *skb)
-@@ -169,6 +170,7 @@ int br_handle_frame_finish(struct net *n
- 			dst->used = now;
- 		br_forward(dst->dst, skb, local_rcv, false);
- 	} else {
-+		br_offload_skb_disable(skb);
- 		if (!mcast_hit)
- 			br_flood(br, skb, pkt_type, local_rcv, false);
- 		else
-@@ -287,6 +289,9 @@ static rx_handler_result_t br_handle_fra
- 	memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
- 
- 	p = br_port_get_rcu(skb->dev);
-+	if (br_offload_input(p, skb))
-+		return RX_HANDLER_CONSUMED;
-+
- 	if (p->flags & BR_VLAN_TUNNEL) {
- 		if (br_handle_ingress_vlan_tunnel(skb, p,
- 						  nbp_vlan_group_rcu(p)))
---- /dev/null
-+++ b/net/bridge/br_offload.c
-@@ -0,0 +1,436 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+#include <linux/kernel.h>
-+#include <linux/workqueue.h>
-+#include "br_private.h"
-+#include "br_private_offload.h"
-+
-+static DEFINE_SPINLOCK(offload_lock);
-+
-+struct bridge_flow_key {
-+	u8 dest[ETH_ALEN];
-+	u8 src[ETH_ALEN];
-+#ifdef CONFIG_BRIDGE_VLAN_FILTERING
-+	u16 vlan_tag;
-+	bool vlan_present;
-+#endif
-+};
-+
-+struct bridge_flow {
-+	struct net_bridge_port *port;
-+	struct rhash_head node;
-+	struct bridge_flow_key key;
-+#ifdef CONFIG_BRIDGE_VLAN_FILTERING
-+	bool vlan_out_present;
-+	u16 vlan_out;
-+#endif
-+
-+	unsigned long used;
-+	struct net_bridge_fdb_entry *fdb_in, *fdb_out;
-+	struct hlist_node fdb_list_in, fdb_list_out;
-+
-+	struct rcu_head rcu;
-+};
-+
-+static const struct rhashtable_params flow_params = {
-+	.automatic_shrinking = true,
-+	.head_offset = offsetof(struct bridge_flow, node),
-+	.key_len = sizeof(struct bridge_flow_key),
-+	.key_offset = offsetof(struct bridge_flow, key),
-+};
-+
-+static struct kmem_cache *offload_cache __read_mostly;
-+
-+static void
-+flow_rcu_free(struct rcu_head *head)
-+{
-+	struct bridge_flow *flow;
-+
-+	flow = container_of(head, struct bridge_flow, rcu);
-+	kmem_cache_free(offload_cache, flow);
-+}
-+
-+static void
-+__br_offload_flow_free(struct bridge_flow *flow)
-+{
-+	flow->used = 0;
-+	hlist_del(&flow->fdb_list_in);
-+	hlist_del(&flow->fdb_list_out);
-+
-+	call_rcu(&flow->rcu, flow_rcu_free);
-+}
-+
-+static void
-+br_offload_flow_free(struct bridge_flow *flow)
-+{
-+	if (rhashtable_remove_fast(&flow->port->offload.rht, &flow->node,
-+				   flow_params) != 0)
-+		return;
-+
-+	__br_offload_flow_free(flow);
-+}
-+
-+static bool
-+br_offload_flow_fdb_refresh_time(struct bridge_flow *flow,
-+				 struct net_bridge_fdb_entry *fdb)
-+{
-+	if (!time_after(flow->used, fdb->updated))
-+		return false;
-+
-+	fdb->updated = flow->used;
-+
-+	return true;
-+}
-+
-+
-+static void
-+br_offload_flow_refresh_time(struct bridge_flow *flow)
-+{
-+	br_offload_flow_fdb_refresh_time(flow, flow->fdb_in);
-+	br_offload_flow_fdb_refresh_time(flow, flow->fdb_out);
-+}
-+
-+static void
-+br_offload_destroy_cb(void *ptr, void *arg)
-+{
-+	struct bridge_flow *flow = ptr;
-+
-+	__br_offload_flow_free(flow);
-+}
-+
-+static bool
-+br_offload_need_gc(struct net_bridge_port *p)
-+{
-+	return (atomic_read(&p->offload.rht.nelems) +
-+	        p->br->offload_cache_reserved) >= p->br->offload_cache_size;
-+}
-+
-+static void
-+br_offload_gc_work(struct work_struct *work)
-+{
-+	struct rhashtable_iter hti;
-+	struct net_bridge_port *p;
-+	struct bridge_flow *gc_flow = NULL;
-+	struct bridge_flow *flow;
-+	unsigned long gc_used;
-+
-+	p = container_of(work, struct net_bridge_port, offload.gc_work);
-+
-+	if (!br_offload_need_gc(p))
-+		return;
-+
-+	rhashtable_walk_enter(&p->offload.rht, &hti);
-+	rhashtable_walk_start(&hti);
-+	while ((flow = rhashtable_walk_next(&hti)) != NULL) {
-+		unsigned long used;
-+
-+		if (IS_ERR(flow))
-+			continue;
-+
-+		used = READ_ONCE(flow->used);
-+		if (!used)
-+			continue;
-+
-+		if (gc_flow && !time_before(used, gc_used))
-+			continue;
-+
-+		gc_flow = flow;
-+		gc_used = used;
-+	}
-+	rhashtable_walk_stop(&hti);
-+	rhashtable_walk_exit(&hti);
-+
-+	if (!gc_flow)
-+		return;
-+
-+	spin_lock_bh(&offload_lock);
-+	if (br_offload_need_gc(p) && gc_flow &&
-+	    gc_flow->used == gc_used)
-+		br_offload_flow_free(gc_flow);
-+	if (p->offload.enabled && br_offload_need_gc(p))
-+		queue_work(system_long_wq, work);
-+	spin_unlock_bh(&offload_lock);
-+
-+}
-+
-+void br_offload_port_state(struct net_bridge_port *p)
-+{
-+	struct net_bridge_port_offload *o = &p->offload;
-+	bool enabled = true;
-+	bool flush = false;
-+
-+	if (p->state != BR_STATE_FORWARDING ||
-+	    !(p->flags & BR_OFFLOAD))
-+		enabled = false;
-+
-+	spin_lock_bh(&offload_lock);
-+	if (o->enabled == enabled)
-+		goto out;
-+
-+	if (enabled) {
-+		if (!o->gc_work.func)
-+			INIT_WORK(&o->gc_work, br_offload_gc_work);
-+		rhashtable_init(&o->rht, &flow_params);
-+	} else {
-+		flush = true;
-+		rhashtable_free_and_destroy(&o->rht, br_offload_destroy_cb, o);
-+	}
-+
-+	o->enabled = enabled;
-+
-+out:
-+	spin_unlock_bh(&offload_lock);
-+
-+	if (flush)
-+		flush_work(&o->gc_work);
-+}
-+
-+void br_offload_fdb_update(const struct net_bridge_fdb_entry *fdb)
-+{
-+	struct bridge_flow *f;
-+	struct hlist_node *tmp;
-+
-+	spin_lock_bh(&offload_lock);
-+
-+	hlist_for_each_entry_safe(f, tmp, &fdb->offload_in, fdb_list_in)
-+		br_offload_flow_free(f);
-+
-+	hlist_for_each_entry_safe(f, tmp, &fdb->offload_out, fdb_list_out)
-+		br_offload_flow_free(f);
-+
-+	spin_unlock_bh(&offload_lock);
-+}
-+
-+static void
-+br_offload_prepare_key(struct net_bridge_port *p, struct bridge_flow_key *key,
-+		       struct sk_buff *skb)
-+{
-+	memset(key, 0, sizeof(*key));
-+	memcpy(key, eth_hdr(skb), 2 * ETH_ALEN);
-+#ifdef CONFIG_BRIDGE_VLAN_FILTERING
-+	if (!br_opt_get(p->br, BROPT_VLAN_ENABLED))
-+		return;
-+
-+	if (!skb_vlan_tag_present(skb) || skb->vlan_proto != p->br->vlan_proto)
-+		return;
-+
-+	key->vlan_present = true;
-+	key->vlan_tag = skb_vlan_tag_get_id(skb);
-+#endif
-+}
-+
-+void br_offload_output(struct sk_buff *skb)
-+{
-+	struct net_bridge_port_offload *o;
-+	struct br_input_skb_cb *cb = (struct br_input_skb_cb *)skb->cb;
-+	struct net_bridge_port *p, *inp;
-+	struct net_device *dev;
-+	struct net_bridge_fdb_entry *fdb_in, *fdb_out;
-+	struct net_bridge_vlan_group *vg;
-+	struct bridge_flow_key key;
-+	struct bridge_flow *flow;
-+	u16 vlan;
-+
-+	if (!cb->offload)
-+		return;
-+
-+	rcu_read_lock();
-+
-+	p = br_port_get_rcu(skb->dev);
-+	if (!p)
-+		goto out;
-+
-+	o = &p->offload;
-+	if (!o->enabled)
-+		goto out;
-+
-+	if (atomic_read(&p->offload.rht.nelems) >= p->br->offload_cache_size)
-+		goto out;
-+
-+	dev = dev_get_by_index_rcu(dev_net(p->br->dev), cb->input_ifindex);
-+	if (!dev)
-+		goto out;
-+
-+	inp = br_port_get_rcu(dev);
-+	if (!inp)
-+		goto out;
-+
-+	vg = nbp_vlan_group_rcu(inp);
-+	vlan = cb->input_vlan_present ? cb->input_vlan_tag : br_get_pvid(vg);
-+	fdb_in = br_fdb_find_rcu(p->br, eth_hdr(skb)->h_source, vlan);
-+	if (!fdb_in || !fdb_in->dst)
-+		goto out;
-+
-+	vg = nbp_vlan_group_rcu(p);
-+	vlan = skb_vlan_tag_present(skb) ? skb_vlan_tag_get_id(skb) : br_get_pvid(vg);
-+	fdb_out = br_fdb_find_rcu(p->br, eth_hdr(skb)->h_dest, vlan);
-+	if (!fdb_out || !fdb_out->dst)
-+		goto out;
-+
-+	br_offload_prepare_key(p, &key, skb);
-+#ifdef CONFIG_BRIDGE_VLAN_FILTERING
-+	key.vlan_present = cb->input_vlan_present;
-+	key.vlan_tag = cb->input_vlan_tag;
-+#endif
-+
-+	flow = kmem_cache_alloc(offload_cache, GFP_ATOMIC);
-+	flow->port = inp;
-+	memcpy(&flow->key, &key, sizeof(key));
-+
-+#ifdef CONFIG_BRIDGE_VLAN_FILTERING
-+	flow->vlan_out_present = skb_vlan_tag_present(skb);
-+	flow->vlan_out = skb_vlan_tag_get(skb);
-+#endif
-+
-+	flow->fdb_in = fdb_in;
-+	flow->fdb_out = fdb_out;
-+	flow->used = jiffies;
-+
-+	spin_lock_bh(&offload_lock);
-+	if (!o->enabled ||
-+	    atomic_read(&p->offload.rht.nelems) >= p->br->offload_cache_size ||
-+	    rhashtable_insert_fast(&inp->offload.rht, &flow->node, flow_params)) {
-+		kmem_cache_free(offload_cache, flow);
-+		goto out_unlock;
-+	}
-+
-+	hlist_add_head(&flow->fdb_list_in, &fdb_in->offload_in);
-+	hlist_add_head(&flow->fdb_list_out, &fdb_out->offload_out);
-+
-+	if (br_offload_need_gc(p))
-+		queue_work(system_long_wq, &p->offload.gc_work);
-+
-+out_unlock:
-+	spin_unlock_bh(&offload_lock);
-+
-+out:
-+	rcu_read_unlock();
-+}
-+
-+bool br_offload_input(struct net_bridge_port *p, struct sk_buff *skb)
-+{
-+	struct net_bridge_port_offload *o = &p->offload;
-+	struct br_input_skb_cb *cb = (struct br_input_skb_cb *)skb->cb;
-+	struct bridge_flow_key key;
-+	struct net_bridge_port *dst;
-+	struct bridge_flow *flow;
-+	unsigned long now = jiffies;
-+	bool ret = false;
-+
-+	if (skb->len < sizeof(key))
-+		return false;
-+
-+	if (!o->enabled)
-+		return false;
-+
-+	if (is_multicast_ether_addr(eth_hdr(skb)->h_dest))
-+		return false;
-+
-+	br_offload_prepare_key(p, &key, skb);
-+
-+	rcu_read_lock();
-+	flow = rhashtable_lookup(&o->rht, &key, flow_params);
-+	if (!flow) {
-+		cb->offload = 1;
-+#ifdef CONFIG_BRIDGE_VLAN_FILTERING
-+		cb->input_vlan_present = key.vlan_present != 0;
-+		cb->input_vlan_tag = key.vlan_tag;
-+#endif
-+		cb->input_ifindex = p->dev->ifindex;
-+		goto out;
-+	}
-+
-+	if (flow->fdb_in->dst != p)
-+		goto out;
-+
-+	dst = flow->fdb_out->dst;
-+	if (!dst)
-+		goto out;
-+
-+	ret = true;
-+#ifdef CONFIG_BRIDGE_VLAN_FILTERING
-+	if (!flow->vlan_out_present && key.vlan_present) {
-+		__vlan_hwaccel_clear_tag(skb);
-+	} else if (flow->vlan_out_present) {
-+		if (skb_vlan_tag_present(skb) &&
-+		    skb->vlan_proto != p->br->vlan_proto) {
-+			/* Protocol-mismatch, empty out vlan_tci for new tag */
-+			skb_push(skb, ETH_HLEN);
-+			skb = vlan_insert_tag_set_proto(skb, skb->vlan_proto,
-+							skb_vlan_tag_get(skb));
-+			if (unlikely(!skb))
-+				goto out;
-+
-+			skb_pull(skb, ETH_HLEN);
-+			skb_reset_mac_len(skb);
-+		}
-+
-+		__vlan_hwaccel_put_tag(skb, p->br->vlan_proto,
-+				       flow->vlan_out);
-+	}
-+#endif
-+
-+	skb->dev = dst->dev;
-+	skb_push(skb, ETH_HLEN);
-+
-+	if (skb_warn_if_lro(skb) || !is_skb_forwardable(skb->dev, skb)) {
-+		kfree_skb(skb);
-+		goto out;
-+	}
-+
-+	if (now - flow->used >= HZ) {
-+		flow->used = now;
-+		br_offload_flow_refresh_time(flow);
-+	}
-+
-+	skb_forward_csum(skb);
-+	dev_queue_xmit(skb);
-+
-+out:
-+	rcu_read_unlock();
-+	return ret;
-+}
-+
-+static void
-+br_offload_check_gc(struct net_bridge *br)
-+{
-+	struct net_bridge_port *p;
-+
-+	spin_lock_bh(&br->lock);
-+	list_for_each_entry(p, &br->port_list, list)
-+		if (br_offload_need_gc(p))
-+			queue_work(system_long_wq, &p->offload.gc_work);
-+	spin_unlock_bh(&br->lock);
-+}
-+
-+
-+int br_offload_set_cache_size(struct net_bridge *br, unsigned long val)
-+{
-+	br->offload_cache_size = val;
-+	br_offload_check_gc(br);
-+
-+	return 0;
-+}
-+
-+int br_offload_set_cache_reserved(struct net_bridge *br, unsigned long val)
-+{
-+	br->offload_cache_reserved = val;
-+	br_offload_check_gc(br);
-+
-+	return 0;
-+}
-+
-+int __init br_offload_init(void)
-+{
-+	offload_cache = kmem_cache_create("bridge_offload_cache",
-+					  sizeof(struct bridge_flow),
-+					  0, SLAB_HWCACHE_ALIGN, NULL);
-+	if (!offload_cache)
-+		return -ENOMEM;
-+
-+	return 0;
-+}
-+
-+void br_offload_fini(void)
-+{
-+	kmem_cache_destroy(offload_cache);
-+}
---- a/net/bridge/br_private.h
-+++ b/net/bridge/br_private.h
-@@ -207,7 +207,13 @@ struct net_bridge_fdb_entry {
- 	unsigned long			updated ____cacheline_aligned_in_smp;
- 	unsigned long			used;
- 
--	struct rcu_head			rcu;
-+	union {
-+		struct {
-+			struct hlist_head		offload_in;
-+			struct hlist_head		offload_out;
-+		};
-+		struct rcu_head			rcu;
-+	};
- };
- 
- #define MDB_PG_FLAGS_PERMANENT	BIT(0)
-@@ -280,6 +286,12 @@ struct net_bridge_mdb_entry {
- 	struct rcu_head			rcu;
- };
- 
-+struct net_bridge_port_offload {
-+	struct rhashtable		rht;
-+	struct work_struct		gc_work;
-+	bool				enabled;
-+};
-+
- struct net_bridge_port {
- 	struct net_bridge		*br;
- 	struct net_device		*dev;
-@@ -337,6 +349,7 @@ struct net_bridge_port {
- 	u16				backup_redirected_cnt;
- 
- 	struct bridge_stp_xstats	stp_xstats;
-+	struct net_bridge_port_offload	offload;
- };
- 
- #define kobj_to_brport(obj)	container_of(obj, struct net_bridge_port, kobj)
-@@ -475,6 +488,9 @@ struct net_bridge {
- 	struct kobject			*ifobj;
- 	u32				auto_cnt;
- 
-+	u32				offload_cache_size;
-+	u32				offload_cache_reserved;
-+
- #ifdef CONFIG_NET_SWITCHDEV
- 	int offload_fwd_mark;
- #endif
-@@ -501,6 +517,10 @@ struct br_input_skb_cb {
- #ifdef CONFIG_NETFILTER_FAMILY_BRIDGE
- 	u8 br_netfilter_broute:1;
- #endif
-+	u8 offload:1;
-+	u8 input_vlan_present:1;
-+	u16 input_vlan_tag;
-+	int input_ifindex;
- 
- #ifdef CONFIG_NET_SWITCHDEV
- 	int offload_fwd_mark;
---- /dev/null
-+++ b/net/bridge/br_private_offload.h
-@@ -0,0 +1,21 @@
-+#ifndef __BR_OFFLOAD_H
-+#define __BR_OFFLOAD_H
-+
-+bool br_offload_input(struct net_bridge_port *p, struct sk_buff *skb);
-+void br_offload_output(struct sk_buff *skb);
-+void br_offload_port_state(struct net_bridge_port *p);
-+void br_offload_fdb_update(const struct net_bridge_fdb_entry *fdb);
-+int br_offload_init(void);
-+void br_offload_fini(void);
-+int br_offload_set_cache_size(struct net_bridge *br, unsigned long val);
-+int br_offload_set_cache_reserved(struct net_bridge *br, unsigned long val);
-+
-+static inline void br_offload_skb_disable(struct sk_buff *skb)
-+{
-+	struct br_input_skb_cb *cb = (struct br_input_skb_cb *)skb->cb;
-+
-+	if (cb->offload)
-+		cb->offload = 0;
-+}
-+
-+#endif
---- a/net/bridge/br_stp.c
-+++ b/net/bridge/br_stp.c
-@@ -12,6 +12,7 @@
- 
- #include "br_private.h"
- #include "br_private_stp.h"
-+#include "br_private_offload.h"
- 
- /* since time values in bpdu are in jiffies and then scaled (1/256)
-  * before sending, make sure that is at least one STP tick.
-@@ -52,6 +53,8 @@ void br_set_state(struct net_bridge_port
- 				(unsigned int) p->port_no, p->dev->name,
- 				br_port_state_names[p->state]);
- 
-+	br_offload_port_state(p);
-+
- 	if (p->br->stp_enabled == BR_KERNEL_STP) {
- 		switch (p->state) {
- 		case BR_STATE_BLOCKING:
---- a/net/bridge/br_sysfs_br.c
-+++ b/net/bridge/br_sysfs_br.c
-@@ -18,6 +18,7 @@
- #include <linux/sched/signal.h>
- 
- #include "br_private.h"
-+#include "br_private_offload.h"
- 
- #define to_bridge(cd)	((struct net_bridge *)netdev_priv(to_net_dev(cd)))
- 
-@@ -842,6 +843,38 @@ static ssize_t vlan_stats_per_port_store
- static DEVICE_ATTR_RW(vlan_stats_per_port);
- #endif
- 
-+static ssize_t offload_cache_size_show(struct device *d,
-+				       struct device_attribute *attr,
-+				       char *buf)
-+{
-+	struct net_bridge *br = to_bridge(d);
-+	return sprintf(buf, "%u\n", br->offload_cache_size);
-+}
-+
-+static ssize_t offload_cache_size_store(struct device *d,
-+					struct device_attribute *attr,
-+					const char *buf, size_t len)
-+{
-+	return store_bridge_parm(d, buf, len, br_offload_set_cache_size);
-+}
-+static DEVICE_ATTR_RW(offload_cache_size);
-+
-+static ssize_t offload_cache_reserved_show(struct device *d,
-+				       struct device_attribute *attr,
-+				       char *buf)
-+{
-+	struct net_bridge *br = to_bridge(d);
-+	return sprintf(buf, "%u\n", br->offload_cache_reserved);
-+}
-+
-+static ssize_t offload_cache_reserved_store(struct device *d,
-+					struct device_attribute *attr,
-+					const char *buf, size_t len)
-+{
-+	return store_bridge_parm(d, buf, len, br_offload_set_cache_reserved);
-+}
-+static DEVICE_ATTR_RW(offload_cache_reserved);
-+
- static struct attribute *bridge_attrs[] = {
- 	&dev_attr_forward_delay.attr,
- 	&dev_attr_hello_time.attr,
-@@ -896,6 +929,8 @@ static struct attribute *bridge_attrs[]
- 	&dev_attr_vlan_stats_enabled.attr,
- 	&dev_attr_vlan_stats_per_port.attr,
- #endif
-+	&dev_attr_offload_cache_size.attr,
-+	&dev_attr_offload_cache_reserved.attr,
- 	NULL
- };
- 
---- a/net/bridge/br_sysfs_if.c
-+++ b/net/bridge/br_sysfs_if.c
-@@ -234,6 +234,7 @@ BRPORT_ATTR_FLAG(broadcast_flood, BR_BCA
- BRPORT_ATTR_FLAG(neigh_suppress, BR_NEIGH_SUPPRESS);
- BRPORT_ATTR_FLAG(isolated, BR_ISOLATED);
- BRPORT_ATTR_FLAG(bpdu_filter, BR_BPDU_FILTER);
-+BRPORT_ATTR_FLAG(offload, BR_OFFLOAD);
- 
- #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
- static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf)
-@@ -288,6 +289,7 @@ static const struct brport_attribute *br
- 	&brport_attr_isolated,
- 	&brport_attr_bpdu_filter,
- 	&brport_attr_backup_port,
-+	&brport_attr_offload,
- 	NULL
- };
- 
---- a/net/bridge/br_vlan_tunnel.c
-+++ b/net/bridge/br_vlan_tunnel.c
-@@ -15,6 +15,7 @@
- 
- #include "br_private.h"
- #include "br_private_tunnel.h"
-+#include "br_private_offload.h"
- 
- static inline int br_vlan_tunid_cmp(struct rhashtable_compare_arg *arg,
- 				    const void *ptr)
-@@ -180,6 +181,7 @@ int br_handle_ingress_vlan_tunnel(struct
- 	skb_dst_drop(skb);
- 
- 	__vlan_hwaccel_put_tag(skb, p->br->vlan_proto, vlan->vid);
-+	br_offload_skb_disable(skb);
- 
- 	return 0;
- }
-@@ -203,6 +205,7 @@ int br_handle_egress_vlan_tunnel(struct
- 	if (err)
- 		return err;
- 
-+	br_offload_skb_disable(skb);
- 	tunnel_dst = rcu_dereference(vlan->tinfo.tunnel_dst);
- 	if (tunnel_dst && dst_hold_safe(&tunnel_dst->dst))
- 		skb_dst_set(skb, &tunnel_dst->dst);
diff --git a/target/linux/generic/hack-5.10/601-of_net-add-mac-address-ascii-support.patch b/target/linux/generic/hack-5.10/601-of_net-add-mac-address-ascii-support.patch
deleted file mode 100644
index 517d5cbe5204..000000000000
--- a/target/linux/generic/hack-5.10/601-of_net-add-mac-address-ascii-support.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From: Yousong Zhou <yszhou4tech@gmail.com>
-Subject: [PATCH] of: net: add nvmem cell mac-address-ascii support
-
-This is needed for devices with mac address stored in ascii format,
-e.g. HiWiFi HC6361 to be ported in the following patch.
-
-Submitted-by: Yousong Zhou <yszhou4tech@gmail.com>
----
- net/core/of_net.c | 83 ++++++++++++------
- 1 files changed, 72 insertions(+), 11 deletions(-)
-
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -57,13 +57,70 @@ static int of_get_mac_addr(struct device
- 	return -ENODEV;
- }
- 
-+static void *nvmem_cell_get_mac_address(struct nvmem_cell *cell)
-+{
-+	size_t len;
-+	void *mac;
-+
-+	mac = nvmem_cell_read(cell, &len);
-+	if (IS_ERR(mac))
-+		return mac;
-+	if (len != ETH_ALEN) {
-+		kfree(mac);
-+		return ERR_PTR(-EINVAL);
-+	}
-+	return mac;
-+}
-+
-+static void *nvmem_cell_get_mac_address_ascii(struct nvmem_cell *cell)
-+{
-+	size_t len;
-+	int ret;
-+	void *mac_ascii;
-+	u8 *mac;
-+
-+	mac_ascii = nvmem_cell_read(cell, &len);
-+	if (IS_ERR(mac_ascii))
-+		return mac_ascii;
-+	if (len != ETH_ALEN*2+5) {
-+		kfree(mac_ascii);
-+		return ERR_PTR(-EINVAL);
-+	}
-+	mac = kmalloc(ETH_ALEN, GFP_KERNEL);
-+	if (!mac) {
-+		kfree(mac_ascii);
-+		return ERR_PTR(-ENOMEM);
-+	}
-+	ret = sscanf(mac_ascii, "%2hhx:%2hhx:%2hhx:%2hhx:%2hhx:%2hhx",
-+				&mac[0], &mac[1], &mac[2],
-+				&mac[3], &mac[4], &mac[5]);
-+	kfree(mac_ascii);
-+	if (ret == ETH_ALEN)
-+		return mac;
-+	kfree(mac);
-+	return ERR_PTR(-EINVAL);
-+}
-+
-+static struct nvmem_cell_mac_address_property {
-+	char *name;
-+	void *(*read)(struct nvmem_cell *);
-+} nvmem_cell_mac_address_properties[] = {
-+	{
-+		.name = "mac-address",
-+		.read = nvmem_cell_get_mac_address,
-+	}, {
-+		.name = "mac-address-ascii",
-+		.read = nvmem_cell_get_mac_address_ascii,
-+	},
-+};
-+
- static int of_get_mac_addr_nvmem(struct device_node *np, u8 *addr)
- {
- 	struct platform_device *pdev = of_find_device_by_node(np);
-+	struct nvmem_cell_mac_address_property *property;
- 	struct nvmem_cell *cell;
- 	const void *mac;
--	size_t len;
--	int ret;
-+	int ret, i;
- 
- 	/* Try lookup by device first, there might be a nvmem_cell_lookup
- 	 * associated with a given device.
-@@ -74,17 +131,26 @@ static int of_get_mac_addr_nvmem(struct
- 		return ret;
- 	}
- 
--	cell = of_nvmem_cell_get(np, "mac-address");
-+	for (i = 0; i < ARRAY_SIZE(nvmem_cell_mac_address_properties); i++) {
-+		property = &nvmem_cell_mac_address_properties[i];
-+		cell = of_nvmem_cell_get(np, property->name);
-+		/* For -EPROBE_DEFER don't try other properties.
-+		 * We'll get back to this one.
-+		 */
-+		if (!IS_ERR(cell) || PTR_ERR(cell) == -EPROBE_DEFER)
-+			break;
-+	}
-+
- 	if (IS_ERR(cell))
- 		return PTR_ERR(cell);
- 
--	mac = nvmem_cell_read(cell, &len);
-+	mac = property->read(cell);
- 	nvmem_cell_put(cell);
- 
- 	if (IS_ERR(mac))
- 		return PTR_ERR(mac);
- 
--	if (len != ETH_ALEN || !is_valid_ether_addr(mac)) {
-+	if (!is_valid_ether_addr(mac)) {
- 		kfree(mac);
- 		return -EINVAL;
- 	}
diff --git a/target/linux/generic/hack-5.10/645-netfilter-connmark-introduce-set-dscpmark.patch b/target/linux/generic/hack-5.10/645-netfilter-connmark-introduce-set-dscpmark.patch
deleted file mode 100644
index c368c4ae3bfd..000000000000
--- a/target/linux/generic/hack-5.10/645-netfilter-connmark-introduce-set-dscpmark.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-From eda40b8c8c82e0f2789d6bc8bf63846dce2e8f32 Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Sat, 23 Mar 2019 09:29:49 +0000
-Subject: [PATCH] netfilter: connmark: introduce set-dscpmark
-
-set-dscpmark is a method of storing the DSCP of an ip packet into
-conntrack mark.  In combination with a suitable tc filter action
-(act_ctinfo) DSCP values are able to be stored in the mark on egress and
-restored on ingress across links that otherwise alter or bleach DSCP.
-
-This is useful for qdiscs such as CAKE which are able to shape according
-to policies based on DSCP.
-
-Ingress classification is traditionally a challenging task since
-iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
-lookups, hence are unable to see internal IPv4 addresses as used on the
-typical home masquerading gateway.
-
-x_tables CONNMARK set-dscpmark target solves the problem of storing the
-DSCP to the conntrack mark in a way suitable for the new act_ctinfo tc
-action to restore.
-
-The set-dscpmark option accepts 2 parameters, a 32bit 'dscpmask' and a
-32bit 'statemask'.  The dscp mask must be 6 contiguous bits and
-represents the area where the DSCP will be stored in the connmark.  The
-state mask is a minimum 1 bit length mask that must not overlap with the
-dscpmask.  It represents a flag which is set when the DSCP has been
-stored in the conntrack mark. This is useful to implement a 'one shot'
-iptables based classification where the 'complicated' iptables rules are
-only run once to classify the connection on initial (egress) packet and
-subsequent packets are all marked/restored with the same DSCP.  A state
-mask of zero disables the setting of a status bit/s.
-
-example syntax with a suitably modified iptables user space application:
-
-iptables -A QOS_MARK_eth0 -t mangle -j CONNMARK --set-dscpmark 0xfc000000/0x01000000
-
-Would store the DSCP in the top 6 bits of the 32bit mark field, and use
-the LSB of the top byte as the 'DSCP has been stored' marker.
-
-|----0xFC----conntrack mark----000000---|
-| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
-| DSCP       | unused | flag  |unused   |
-|-----------------------0x01---000000---|
-      ^                   ^
-      |                   |
-      ---|             Conditional flag
-         |             set this when dscp
-|-ip diffserv-|        stored in mark
-| 6 bits      |
-|-------------|
-
-an identically configured tc action to restore looks like:
-
-tc filter show dev eth0 ingress
-filter parent ffff: protocol all pref 10 u32 chain 0
-filter parent ffff: protocol all pref 10 u32 chain 0 fh 800: ht divisor 1
-filter parent ffff: protocol all pref 10 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1: not_in_hw
-  match 00000000/00000000 at 0
-	action order 1: ctinfo zone 0 pipe
-	 index 2 ref 1 bind 1 dscp 0xfc000000/0x1000000
-
-	action order 2: mirred (Egress Redirect to device ifb4eth0) stolen
-	index 1 ref 1 bind 1
-
-|----0xFC----conntrack mark----000000---|
-| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
-| DSCP       | unused | flag  |unused   |
-|-----------------------0x01---000000---|
-      |                   |
-      |                   |
-      ---|             Conditional flag
-         v             only restore if set
-|-ip diffserv-|
-| 6 bits      |
-|-------------|
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- include/uapi/linux/netfilter/xt_connmark.h | 10 ++++
- net/netfilter/xt_connmark.c                | 55 ++++++++++++++++++----
- 2 files changed, 57 insertions(+), 8 deletions(-)
-
---- a/include/uapi/linux/netfilter/xt_connmark.h
-+++ b/include/uapi/linux/netfilter/xt_connmark.h
-@@ -20,6 +20,11 @@ enum {
- };
- 
- enum {
-+	XT_CONNMARK_VALUE =	(1 << 0),
-+	XT_CONNMARK_DSCP = 	(1 << 1)
-+};
-+
-+enum {
- 	D_SHIFT_LEFT = 0,
- 	D_SHIFT_RIGHT,
- };
-@@ -34,6 +39,11 @@ struct xt_connmark_tginfo2 {
- 	__u8 shift_dir, shift_bits, mode;
- };
- 
-+struct xt_connmark_tginfo3 {
-+	__u32 ctmark, ctmask, nfmask;
-+	__u8 shift_dir, shift_bits, mode, func;
-+};
-+
- struct xt_connmark_mtinfo1 {
- 	__u32 mark, mask;
- 	__u8 invert;
---- a/net/netfilter/xt_connmark.c
-+++ b/net/netfilter/xt_connmark.c
-@@ -24,13 +24,13 @@ MODULE_ALIAS("ipt_connmark");
- MODULE_ALIAS("ip6t_connmark");
- 
- static unsigned int
--connmark_tg_shift(struct sk_buff *skb, const struct xt_connmark_tginfo2 *info)
-+connmark_tg_shift(struct sk_buff *skb, const struct xt_connmark_tginfo3 *info)
- {
- 	enum ip_conntrack_info ctinfo;
- 	u_int32_t new_targetmark;
- 	struct nf_conn *ct;
- 	u_int32_t newmark;
--	u_int32_t oldmark;
-+	u_int8_t dscp;
- 
- 	ct = nf_ct_get(skb, &ctinfo);
- 	if (ct == NULL)
-@@ -38,13 +38,24 @@ connmark_tg_shift(struct sk_buff *skb, c
- 
- 	switch (info->mode) {
- 	case XT_CONNMARK_SET:
--		oldmark = READ_ONCE(ct->mark);
--		newmark = (oldmark & ~info->ctmask) ^ info->ctmark;
--		if (info->shift_dir == D_SHIFT_RIGHT)
--			newmark >>= info->shift_bits;
--		else
--			newmark <<= info->shift_bits;
-+		newmark = READ_ONCE(ct->mark);
-+		if (info->func & XT_CONNMARK_VALUE) {
-+			newmark = (newmark & ~info->ctmask) ^ info->ctmark;
-+			if (info->shift_dir == D_SHIFT_RIGHT)
-+				newmark >>= info->shift_bits;
-+			else
-+				newmark <<= info->shift_bits;
-+		} else if (info->func & XT_CONNMARK_DSCP) {
-+			if (skb->protocol == htons(ETH_P_IP))
-+				dscp = ipv4_get_dsfield(ip_hdr(skb)) >> 2;
-+			else if (skb->protocol == htons(ETH_P_IPV6))
-+				dscp = ipv6_get_dsfield(ipv6_hdr(skb)) >> 2;
-+			else	/* protocol doesn't have diffserv */
-+				break;
- 
-+			newmark = (newmark & ~info->ctmark) |
-+				  (info->ctmask | (dscp << info->shift_bits));
-+		}
- 		if (READ_ONCE(ct->mark) != newmark) {
- 			WRITE_ONCE(ct->mark, newmark);
- 			nf_conntrack_event_cache(IPCT_MARK, ct);
-@@ -83,20 +94,36 @@ static unsigned int
- connmark_tg(struct sk_buff *skb, const struct xt_action_param *par)
- {
- 	const struct xt_connmark_tginfo1 *info = par->targinfo;
--	const struct xt_connmark_tginfo2 info2 = {
-+	const struct xt_connmark_tginfo3 info3 = {
- 		.ctmark	= info->ctmark,
- 		.ctmask	= info->ctmask,
- 		.nfmask	= info->nfmask,
- 		.mode	= info->mode,
-+		.func	= XT_CONNMARK_VALUE
- 	};
- 
--	return connmark_tg_shift(skb, &info2);
-+	return connmark_tg_shift(skb, &info3);
- }
- 
- static unsigned int
- connmark_tg_v2(struct sk_buff *skb, const struct xt_action_param *par)
- {
- 	const struct xt_connmark_tginfo2 *info = par->targinfo;
-+	const struct xt_connmark_tginfo3 info3 = {
-+		.ctmark	= info->ctmark,
-+		.ctmask	= info->ctmask,
-+		.nfmask	= info->nfmask,
-+		.mode	= info->mode,
-+		.func	= XT_CONNMARK_VALUE
-+	};
-+
-+	return connmark_tg_shift(skb, &info3);
-+}
-+
-+static unsigned int
-+connmark_tg_v3(struct sk_buff *skb, const struct xt_action_param *par)
-+{
-+	const struct xt_connmark_tginfo3 *info = par->targinfo;
- 
- 	return connmark_tg_shift(skb, info);
- }
-@@ -167,6 +194,16 @@ static struct xt_target connmark_tg_reg[
- 		.targetsize     = sizeof(struct xt_connmark_tginfo2),
- 		.destroy        = connmark_tg_destroy,
- 		.me             = THIS_MODULE,
-+	},
-+	{
-+		.name           = "CONNMARK",
-+		.revision       = 3,
-+		.family         = NFPROTO_UNSPEC,
-+		.checkentry     = connmark_tg_check,
-+		.target         = connmark_tg_v3,
-+		.targetsize     = sizeof(struct xt_connmark_tginfo3),
-+		.destroy        = connmark_tg_destroy,
-+		.me             = THIS_MODULE,
- 	}
- };
- 
diff --git a/target/linux/generic/hack-5.10/650-netfilter-add-xt_FLOWOFFLOAD-target.patch b/target/linux/generic/hack-5.10/650-netfilter-add-xt_FLOWOFFLOAD-target.patch
deleted file mode 100644
index b83a185aebba..000000000000
--- a/target/linux/generic/hack-5.10/650-netfilter-add-xt_FLOWOFFLOAD-target.patch
+++ /dev/null
@@ -1,874 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 20 Feb 2018 15:56:02 +0100
-Subject: [PATCH] netfilter: add xt_FLOWOFFLOAD target
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- create mode 100644 net/netfilter/xt_OFFLOAD.c
-
---- a/net/ipv4/netfilter/Kconfig
-+++ b/net/ipv4/netfilter/Kconfig
-@@ -56,8 +56,6 @@ config NF_TABLES_ARP
- 	help
- 	  This option enables the ARP support for nf_tables.
- 
--endif # NF_TABLES
--
- config NF_FLOW_TABLE_IPV4
- 	tristate "Netfilter flow table IPv4 module"
- 	depends on NF_FLOW_TABLE
-@@ -66,6 +64,8 @@ config NF_FLOW_TABLE_IPV4
- 
- 	  To compile it as a module, choose M here.
- 
-+endif # NF_TABLES
-+
- config NF_DUP_IPV4
- 	tristate "Netfilter IPv4 packet duplication to alternate destination"
- 	depends on !NF_CONNTRACK || NF_CONNTRACK
---- a/net/ipv6/netfilter/Kconfig
-+++ b/net/ipv6/netfilter/Kconfig
-@@ -45,7 +45,6 @@ config NFT_FIB_IPV6
- 	  multicast or blackhole.
- 
- endif # NF_TABLES_IPV6
--endif # NF_TABLES
- 
- config NF_FLOW_TABLE_IPV6
- 	tristate "Netfilter flow table IPv6 module"
-@@ -55,6 +54,8 @@ config NF_FLOW_TABLE_IPV6
- 
- 	  To compile it as a module, choose M here.
- 
-+endif # NF_TABLES
-+
- config NF_DUP_IPV6
- 	tristate "Netfilter IPv6 packet duplication to alternate destination"
- 	depends on !NF_CONNTRACK || NF_CONNTRACK
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -682,8 +682,6 @@ config NFT_FIB_NETDEV
- 
- endif # NF_TABLES_NETDEV
- 
--endif # NF_TABLES
--
- config NF_FLOW_TABLE_INET
- 	tristate "Netfilter flow table mixed IPv4/IPv6 module"
- 	depends on NF_FLOW_TABLE
-@@ -692,11 +690,12 @@ config NF_FLOW_TABLE_INET
- 
- 	  To compile it as a module, choose M here.
- 
-+endif # NF_TABLES
-+
- config NF_FLOW_TABLE
- 	tristate "Netfilter flow table module"
- 	depends on NETFILTER_INGRESS
- 	depends on NF_CONNTRACK
--	depends on NF_TABLES
- 	help
- 	  This option adds the flow table core infrastructure.
- 
-@@ -976,6 +975,15 @@ config NETFILTER_XT_TARGET_NOTRACK
- 	depends on NETFILTER_ADVANCED
- 	select NETFILTER_XT_TARGET_CT
- 
-+config NETFILTER_XT_TARGET_FLOWOFFLOAD
-+	tristate '"FLOWOFFLOAD" target support'
-+	depends on NF_FLOW_TABLE
-+	depends on NETFILTER_INGRESS
-+	help
-+	  This option adds a `FLOWOFFLOAD' target, which uses the nf_flow_offload
-+	  module to speed up processing of packets by bypassing the usual
-+	  netfilter chains
-+
- config NETFILTER_XT_TARGET_RATEEST
- 	tristate '"RATEEST" target support'
- 	depends on NETFILTER_ADVANCED
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -145,6 +145,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIF
- obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
-+obj-$(CONFIG_NETFILTER_XT_TARGET_FLOWOFFLOAD) += xt_FLOWOFFLOAD.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_HMARK) += xt_HMARK.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
---- /dev/null
-+++ b/net/netfilter/xt_FLOWOFFLOAD.c
-@@ -0,0 +1,712 @@
-+/*
-+ * Copyright (C) 2018-2021 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/netfilter.h>
-+#include <linux/netfilter/xt_FLOWOFFLOAD.h>
-+#include <linux/if_vlan.h>
-+#include <linux/if_pppox.h>
-+#include <linux/ppp_defs.h>
-+#include <net/ip.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_extend.h>
-+#include <net/netfilter/nf_conntrack_helper.h>
-+#include <net/netfilter/nf_flow_table.h>
-+
-+struct xt_flowoffload_hook {
-+	struct hlist_node list;
-+	struct nf_hook_ops ops;
-+	struct net *net;
-+	bool registered;
-+	bool used;
-+};
-+
-+struct xt_flowoffload_table {
-+	struct nf_flowtable ft;
-+	struct hlist_head hooks;
-+	struct delayed_work work;
-+};
-+
-+struct nf_forward_info {
-+	const struct net_device *indev;
-+	const struct net_device *outdev;
-+	const struct net_device *hw_outdev;
-+	struct id {
-+		__u16	id;
-+		__be16	proto;
-+	} encap[NF_FLOW_TABLE_ENCAP_MAX];
-+	u8 num_encaps;
-+	u8 ingress_vlans;
-+	u8 h_source[ETH_ALEN];
-+	u8 h_dest[ETH_ALEN];
-+	enum flow_offload_xmit_type xmit_type;
-+};
-+
-+static DEFINE_SPINLOCK(hooks_lock);
-+
-+struct xt_flowoffload_table flowtable[2];
-+
-+static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb)
-+{
-+	__be16 proto;
-+
-+	proto = *((__be16 *)(skb_mac_header(skb) + ETH_HLEN +
-+			     sizeof(struct pppoe_hdr)));
-+	switch (proto) {
-+	case htons(PPP_IP):
-+		return htons(ETH_P_IP);
-+	case htons(PPP_IPV6):
-+		return htons(ETH_P_IPV6);
-+	}
-+
-+	return 0;
-+}
-+
-+static unsigned int
-+xt_flowoffload_net_hook(void *priv, struct sk_buff *skb,
-+			const struct nf_hook_state *state)
-+{
-+	struct vlan_ethhdr *veth;
-+	__be16 proto;
-+
-+	switch (skb->protocol) {
-+	case htons(ETH_P_8021Q):
-+		veth = (struct vlan_ethhdr *)skb_mac_header(skb);
-+		proto = veth->h_vlan_encapsulated_proto;
-+		break;
-+	case htons(ETH_P_PPP_SES):
-+		proto = nf_flow_pppoe_proto(skb);
-+		break;
-+	default:
-+		proto = skb->protocol;
-+		break;
-+	}
-+
-+	switch (proto) {
-+	case htons(ETH_P_IP):
-+		return nf_flow_offload_ip_hook(priv, skb, state);
-+	case htons(ETH_P_IPV6):
-+		return nf_flow_offload_ipv6_hook(priv, skb, state);
-+	}
-+
-+	return NF_ACCEPT;
-+}
-+
-+static int
-+xt_flowoffload_create_hook(struct xt_flowoffload_table *table,
-+			   struct net_device *dev)
-+{
-+	struct xt_flowoffload_hook *hook;
-+	struct nf_hook_ops *ops;
-+
-+	hook = kzalloc(sizeof(*hook), GFP_ATOMIC);
-+	if (!hook)
-+		return -ENOMEM;
-+
-+	ops = &hook->ops;
-+	ops->pf = NFPROTO_NETDEV;
-+	ops->hooknum = NF_NETDEV_INGRESS;
-+	ops->priority = 10;
-+	ops->priv = &table->ft;
-+	ops->hook = xt_flowoffload_net_hook;
-+	ops->dev = dev;
-+
-+	hlist_add_head(&hook->list, &table->hooks);
-+	mod_delayed_work(system_power_efficient_wq, &table->work, 0);
-+
-+	return 0;
-+}
-+
-+static struct xt_flowoffload_hook *
-+flow_offload_lookup_hook(struct xt_flowoffload_table *table,
-+			 struct net_device *dev)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+	hlist_for_each_entry(hook, &table->hooks, list) {
-+		if (hook->ops.dev == dev)
-+			return hook;
-+	}
-+
-+	return NULL;
-+}
-+
-+static void
-+xt_flowoffload_check_device(struct xt_flowoffload_table *table,
-+			    struct net_device *dev)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+	if (!dev)
-+		return;
-+
-+	spin_lock_bh(&hooks_lock);
-+	hook = flow_offload_lookup_hook(table, dev);
-+	if (hook)
-+		hook->used = true;
-+	else
-+		xt_flowoffload_create_hook(table, dev);
-+	spin_unlock_bh(&hooks_lock);
-+}
-+
-+static void
-+xt_flowoffload_register_hooks(struct xt_flowoffload_table *table)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+restart:
-+	hlist_for_each_entry(hook, &table->hooks, list) {
-+		if (hook->registered)
-+			continue;
-+
-+		hook->registered = true;
-+		hook->net = dev_net(hook->ops.dev);
-+		spin_unlock_bh(&hooks_lock);
-+		nf_register_net_hook(hook->net, &hook->ops);
-+		if (table->ft.flags & NF_FLOWTABLE_HW_OFFLOAD)
-+			table->ft.type->setup(&table->ft, hook->ops.dev,
-+					      FLOW_BLOCK_BIND);
-+		spin_lock_bh(&hooks_lock);
-+		goto restart;
-+	}
-+
-+}
-+
-+static bool
-+xt_flowoffload_cleanup_hooks(struct xt_flowoffload_table *table)
-+{
-+	struct xt_flowoffload_hook *hook;
-+	bool active = false;
-+
-+restart:
-+	spin_lock_bh(&hooks_lock);
-+	hlist_for_each_entry(hook, &table->hooks, list) {
-+		if (hook->used || !hook->registered) {
-+			active = true;
-+			continue;
-+		}
-+
-+		hlist_del(&hook->list);
-+		spin_unlock_bh(&hooks_lock);
-+		if (table->ft.flags & NF_FLOWTABLE_HW_OFFLOAD)
-+			table->ft.type->setup(&table->ft, hook->ops.dev,
-+					      FLOW_BLOCK_UNBIND);
-+		nf_unregister_net_hook(hook->net, &hook->ops);
-+		kfree(hook);
-+		goto restart;
-+	}
-+	spin_unlock_bh(&hooks_lock);
-+
-+	return active;
-+}
-+
-+static void
-+xt_flowoffload_check_hook(struct flow_offload *flow, void *data)
-+{
-+	struct xt_flowoffload_table *table = data;
-+	struct flow_offload_tuple *tuple0 = &flow->tuplehash[0].tuple;
-+	struct flow_offload_tuple *tuple1 = &flow->tuplehash[1].tuple;
-+	struct xt_flowoffload_hook *hook;
-+
-+	spin_lock_bh(&hooks_lock);
-+	hlist_for_each_entry(hook, &table->hooks, list) {
-+		if (hook->ops.dev->ifindex != tuple0->iifidx &&
-+		    hook->ops.dev->ifindex != tuple1->iifidx)
-+			continue;
-+
-+		hook->used = true;
-+	}
-+	spin_unlock_bh(&hooks_lock);
-+}
-+
-+static void
-+xt_flowoffload_hook_work(struct work_struct *work)
-+{
-+	struct xt_flowoffload_table *table;
-+	struct xt_flowoffload_hook *hook;
-+	int err;
-+
-+	table = container_of(work, struct xt_flowoffload_table, work.work);
-+
-+	spin_lock_bh(&hooks_lock);
-+	xt_flowoffload_register_hooks(table);
-+	hlist_for_each_entry(hook, &table->hooks, list)
-+		hook->used = false;
-+	spin_unlock_bh(&hooks_lock);
-+
-+	err = nf_flow_table_iterate(&table->ft, xt_flowoffload_check_hook,
-+				    table);
-+	if (err && err != -EAGAIN)
-+		goto out;
-+
-+	if (!xt_flowoffload_cleanup_hooks(table))
-+		return;
-+
-+out:
-+	queue_delayed_work(system_power_efficient_wq, &table->work, HZ);
-+}
-+
-+static bool
-+xt_flowoffload_skip(struct sk_buff *skb, int family)
-+{
-+	if (skb_sec_path(skb))
-+		return true;
-+
-+	if (family == NFPROTO_IPV4) {
-+		const struct ip_options *opt = &(IPCB(skb)->opt);
-+
-+		if (unlikely(opt->optlen))
-+			return true;
-+	}
-+
-+	return false;
-+}
-+
-+static enum flow_offload_xmit_type nf_xmit_type(struct dst_entry *dst)
-+{
-+	if (dst_xfrm(dst))
-+		return FLOW_OFFLOAD_XMIT_XFRM;
-+
-+	return FLOW_OFFLOAD_XMIT_NEIGH;
-+}
-+
-+static void nf_default_forward_path(struct nf_flow_route *route,
-+				    struct dst_entry *dst_cache,
-+				    enum ip_conntrack_dir dir,
-+				    struct net_device **dev)
-+{
-+	dev[!dir] = dst_cache->dev;
-+	route->tuple[!dir].in.ifindex	= dst_cache->dev->ifindex;
-+	route->tuple[dir].dst		= dst_cache;
-+	route->tuple[dir].xmit_type	= nf_xmit_type(dst_cache);
-+}
-+
-+static bool nf_is_valid_ether_device(const struct net_device *dev)
-+{
-+	if (!dev || (dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
-+	    dev->addr_len != ETH_ALEN || !is_valid_ether_addr(dev->dev_addr))
-+		return false;
-+
-+	return true;
-+}
-+
-+static void nf_dev_path_info(const struct net_device_path_stack *stack,
-+			     struct nf_forward_info *info,
-+			     unsigned char *ha)
-+{
-+	const struct net_device_path *path;
-+	int i;
-+
-+	memcpy(info->h_dest, ha, ETH_ALEN);
-+
-+	for (i = 0; i < stack->num_paths; i++) {
-+		path = &stack->path[i];
-+		switch (path->type) {
-+		case DEV_PATH_ETHERNET:
-+		case DEV_PATH_DSA:
-+		case DEV_PATH_VLAN:
-+		case DEV_PATH_PPPOE:
-+			info->indev = path->dev;
-+			if (is_zero_ether_addr(info->h_source))
-+				memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN);
-+
-+			if (path->type == DEV_PATH_ETHERNET)
-+				break;
-+			if (path->type == DEV_PATH_DSA) {
-+				i = stack->num_paths;
-+				break;
-+			}
-+
-+			/* DEV_PATH_VLAN and DEV_PATH_PPPOE */
-+			if (info->num_encaps >= NF_FLOW_TABLE_ENCAP_MAX) {
-+				info->indev = NULL;
-+				break;
-+			}
-+			if (!info->outdev)
-+				info->outdev = path->dev;
-+			info->encap[info->num_encaps].id = path->encap.id;
-+			info->encap[info->num_encaps].proto = path->encap.proto;
-+			info->num_encaps++;
-+			if (path->type == DEV_PATH_PPPOE)
-+				memcpy(info->h_dest, path->encap.h_dest, ETH_ALEN);
-+			break;
-+		case DEV_PATH_BRIDGE:
-+			if (is_zero_ether_addr(info->h_source))
-+				memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN);
-+
-+			switch (path->bridge.vlan_mode) {
-+			case DEV_PATH_BR_VLAN_UNTAG_HW:
-+				info->ingress_vlans |= BIT(info->num_encaps - 1);
-+				break;
-+			case DEV_PATH_BR_VLAN_TAG:
-+				info->encap[info->num_encaps].id = path->bridge.vlan_id;
-+				info->encap[info->num_encaps].proto = path->bridge.vlan_proto;
-+				info->num_encaps++;
-+				break;
-+			case DEV_PATH_BR_VLAN_UNTAG:
-+				info->num_encaps--;
-+				break;
-+			case DEV_PATH_BR_VLAN_KEEP:
-+				break;
-+			}
-+			break;
-+		default:
-+			info->indev = NULL;
-+			break;
-+		}
-+	}
-+	if (!info->outdev)
-+		info->outdev = info->indev;
-+
-+	info->hw_outdev = info->indev;
-+
-+	if (nf_is_valid_ether_device(info->indev))
-+		info->xmit_type = FLOW_OFFLOAD_XMIT_DIRECT;
-+}
-+
-+static int nf_dev_fill_forward_path(const struct nf_flow_route *route,
-+				     const struct dst_entry *dst_cache,
-+				     const struct nf_conn *ct,
-+				     enum ip_conntrack_dir dir, u8 *ha,
-+				     struct net_device_path_stack *stack)
-+{
-+	const void *daddr = &ct->tuplehash[!dir].tuple.src.u3;
-+	struct net_device *dev = dst_cache->dev;
-+	struct neighbour *n;
-+	u8 nud_state;
-+
-+	if (!nf_is_valid_ether_device(dev))
-+		goto out;
-+
-+	n = dst_neigh_lookup(dst_cache, daddr);
-+	if (!n)
-+		return -1;
-+
-+	read_lock_bh(&n->lock);
-+	nud_state = n->nud_state;
-+	ether_addr_copy(ha, n->ha);
-+	read_unlock_bh(&n->lock);
-+	neigh_release(n);
-+
-+	if (!(nud_state & NUD_VALID))
-+		return -1;
-+
-+out:
-+	return dev_fill_forward_path(dev, ha, stack);
-+}
-+
-+static void nf_dev_forward_path(struct nf_flow_route *route,
-+				const struct nf_conn *ct,
-+				enum ip_conntrack_dir dir,
-+				struct net_device **devs)
-+{
-+	const struct dst_entry *dst = route->tuple[dir].dst;
-+	struct net_device_path_stack stack;
-+	struct nf_forward_info info = {};
-+	unsigned char ha[ETH_ALEN];
-+	int i;
-+
-+	if (nf_dev_fill_forward_path(route, dst, ct, dir, ha, &stack) >= 0)
-+		nf_dev_path_info(&stack, &info, ha);
-+
-+	devs[!dir] = (struct net_device *)info.indev;
-+	if (!info.indev)
-+		return;
-+
-+	route->tuple[!dir].in.ifindex = info.indev->ifindex;
-+	for (i = 0; i < info.num_encaps; i++) {
-+		route->tuple[!dir].in.encap[i].id = info.encap[i].id;
-+		route->tuple[!dir].in.encap[i].proto = info.encap[i].proto;
-+	}
-+	route->tuple[!dir].in.num_encaps = info.num_encaps;
-+	route->tuple[!dir].in.ingress_vlans = info.ingress_vlans;
-+
-+	if (info.xmit_type == FLOW_OFFLOAD_XMIT_DIRECT) {
-+		memcpy(route->tuple[dir].out.h_source, info.h_source, ETH_ALEN);
-+		memcpy(route->tuple[dir].out.h_dest, info.h_dest, ETH_ALEN);
-+		route->tuple[dir].out.ifindex = info.outdev->ifindex;
-+		route->tuple[dir].out.hw_ifindex = info.hw_outdev->ifindex;
-+		route->tuple[dir].xmit_type = info.xmit_type;
-+	}
-+}
-+
-+static int
-+xt_flowoffload_route(struct sk_buff *skb, const struct nf_conn *ct,
-+		     const struct xt_action_param *par,
-+		     struct nf_flow_route *route, enum ip_conntrack_dir dir,
-+		     struct net_device **devs)
-+{
-+	struct dst_entry *this_dst = skb_dst(skb);
-+	struct dst_entry *other_dst = NULL;
-+	struct flowi fl;
-+
-+	memset(&fl, 0, sizeof(fl));
-+	switch (xt_family(par)) {
-+	case NFPROTO_IPV4:
-+		fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip;
-+		fl.u.ip4.flowi4_oif = xt_in(par)->ifindex;
-+		break;
-+	case NFPROTO_IPV6:
-+		fl.u.ip6.saddr = ct->tuplehash[!dir].tuple.dst.u3.in6;
-+		fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6;
-+		fl.u.ip6.flowi6_oif = xt_in(par)->ifindex;
-+		break;
-+	}
-+
-+	nf_route(xt_net(par), &other_dst, &fl, false, xt_family(par));
-+	if (!other_dst)
-+		return -ENOENT;
-+
-+	nf_default_forward_path(route, this_dst, dir, devs);
-+	nf_default_forward_path(route, other_dst, !dir, devs);
-+
-+	if (route->tuple[dir].xmit_type	== FLOW_OFFLOAD_XMIT_NEIGH &&
-+	    route->tuple[!dir].xmit_type == FLOW_OFFLOAD_XMIT_NEIGH) {
-+		nf_dev_forward_path(route, ct, dir, devs);
-+		nf_dev_forward_path(route, ct, !dir, devs);
-+	}
-+
-+	return 0;
-+}
-+
-+static unsigned int
-+flowoffload_tg(struct sk_buff *skb, const struct xt_action_param *par)
-+{
-+	struct xt_flowoffload_table *table;
-+	const struct xt_flowoffload_target_info *info = par->targinfo;
-+	struct tcphdr _tcph, *tcph = NULL;
-+	enum ip_conntrack_info ctinfo;
-+	enum ip_conntrack_dir dir;
-+	struct nf_flow_route route = {};
-+	struct flow_offload *flow = NULL;
-+	struct net_device *devs[2] = {};
-+	struct nf_conn *ct;
-+	struct net *net;
-+
-+	if (xt_flowoffload_skip(skb, xt_family(par)))
-+		return XT_CONTINUE;
-+
-+	ct = nf_ct_get(skb, &ctinfo);
-+	if (ct == NULL)
-+		return XT_CONTINUE;
-+
-+	switch (ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum) {
-+	case IPPROTO_TCP:
-+		if (ct->proto.tcp.state != TCP_CONNTRACK_ESTABLISHED)
-+			return XT_CONTINUE;
-+
-+		tcph = skb_header_pointer(skb, par->thoff,
-+					  sizeof(_tcph), &_tcph);
-+		if (unlikely(!tcph || tcph->fin || tcph->rst))
-+			return XT_CONTINUE;
-+		break;
-+	case IPPROTO_UDP:
-+		break;
-+	default:
-+		return XT_CONTINUE;
-+	}
-+
-+	if (nf_ct_ext_exist(ct, NF_CT_EXT_HELPER) ||
-+	    ct->status & (IPS_SEQ_ADJUST | IPS_NAT_CLASH))
-+		return XT_CONTINUE;
-+
-+	if (!nf_ct_is_confirmed(ct))
-+		return XT_CONTINUE;
-+
-+	devs[dir] = xt_out(par);
-+	devs[!dir] = xt_in(par);
-+
-+	if (!devs[dir] || !devs[!dir])
-+		return XT_CONTINUE;
-+
-+	if (test_and_set_bit(IPS_OFFLOAD_BIT, &ct->status))
-+		return XT_CONTINUE;
-+
-+	dir = CTINFO2DIR(ctinfo);
-+
-+	if (xt_flowoffload_route(skb, ct, par, &route, dir, devs) < 0)
-+		goto err_flow_route;
-+
-+	flow = flow_offload_alloc(ct);
-+	if (!flow)
-+		goto err_flow_alloc;
-+
-+	if (flow_offload_route_init(flow, &route) < 0)
-+		goto err_flow_add;
-+
-+	if (tcph) {
-+		ct->proto.tcp.seen[0].flags |= IP_CT_TCP_FLAG_BE_LIBERAL;
-+		ct->proto.tcp.seen[1].flags |= IP_CT_TCP_FLAG_BE_LIBERAL;
-+	}
-+
-+	table = &flowtable[!!(info->flags & XT_FLOWOFFLOAD_HW)];
-+
-+	net = read_pnet(&table->ft.net);
-+	if (!net)
-+		write_pnet(&table->ft.net, xt_net(par));
-+
-+	if (flow_offload_add(&table->ft, flow) < 0)
-+		goto err_flow_add;
-+
-+	xt_flowoffload_check_device(table, devs[0]);
-+	xt_flowoffload_check_device(table, devs[1]);
-+
-+	dst_release(route.tuple[!dir].dst);
-+
-+	return XT_CONTINUE;
-+
-+err_flow_add:
-+	flow_offload_free(flow);
-+err_flow_alloc:
-+	dst_release(route.tuple[!dir].dst);
-+err_flow_route:
-+	clear_bit(IPS_OFFLOAD_BIT, &ct->status);
-+
-+	return XT_CONTINUE;
-+}
-+
-+static int flowoffload_chk(const struct xt_tgchk_param *par)
-+{
-+	struct xt_flowoffload_target_info *info = par->targinfo;
-+
-+	if (info->flags & ~XT_FLOWOFFLOAD_MASK)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+static struct xt_target offload_tg_reg __read_mostly = {
-+	.family		= NFPROTO_UNSPEC,
-+	.name		= "FLOWOFFLOAD",
-+	.revision	= 0,
-+	.targetsize	= sizeof(struct xt_flowoffload_target_info),
-+	.usersize	= sizeof(struct xt_flowoffload_target_info),
-+	.checkentry	= flowoffload_chk,
-+	.target		= flowoffload_tg,
-+	.me		= THIS_MODULE,
-+};
-+
-+static int flow_offload_netdev_event(struct notifier_block *this,
-+				     unsigned long event, void *ptr)
-+{
-+	struct xt_flowoffload_hook *hook0, *hook1;
-+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+
-+	if (event != NETDEV_UNREGISTER)
-+		return NOTIFY_DONE;
-+
-+	spin_lock_bh(&hooks_lock);
-+	hook0 = flow_offload_lookup_hook(&flowtable[0], dev);
-+	if (hook0)
-+		hlist_del(&hook0->list);
-+
-+	hook1 = flow_offload_lookup_hook(&flowtable[1], dev);
-+	if (hook1)
-+		hlist_del(&hook1->list);
-+	spin_unlock_bh(&hooks_lock);
-+
-+	if (hook0) {
-+		nf_unregister_net_hook(hook0->net, &hook0->ops);
-+		kfree(hook0);
-+	}
-+
-+	if (hook1) {
-+		nf_unregister_net_hook(hook1->net, &hook1->ops);
-+		kfree(hook1);
-+	}
-+
-+	nf_flow_table_cleanup(dev);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block flow_offload_netdev_notifier = {
-+	.notifier_call	= flow_offload_netdev_event,
-+};
-+
-+static int nf_flow_rule_route_inet(struct net *net,
-+				   const struct flow_offload *flow,
-+				   enum flow_offload_tuple_dir dir,
-+				   struct nf_flow_rule *flow_rule)
-+{
-+	const struct flow_offload_tuple *flow_tuple = &flow->tuplehash[dir].tuple;
-+	int err;
-+
-+	switch (flow_tuple->l3proto) {
-+	case NFPROTO_IPV4:
-+		err = nf_flow_rule_route_ipv4(net, flow, dir, flow_rule);
-+		break;
-+	case NFPROTO_IPV6:
-+		err = nf_flow_rule_route_ipv6(net, flow, dir, flow_rule);
-+		break;
-+	default:
-+		err = -1;
-+		break;
-+	}
-+
-+	return err;
-+}
-+
-+static struct nf_flowtable_type flowtable_inet = {
-+	.family		= NFPROTO_INET,
-+	.init		= nf_flow_table_init,
-+	.setup		= nf_flow_table_offload_setup,
-+	.action		= nf_flow_rule_route_inet,
-+	.free		= nf_flow_table_free,
-+	.hook		= xt_flowoffload_net_hook,
-+	.owner		= THIS_MODULE,
-+};
-+
-+static int init_flowtable(struct xt_flowoffload_table *tbl)
-+{
-+	INIT_DELAYED_WORK(&tbl->work, xt_flowoffload_hook_work);
-+	tbl->ft.type = &flowtable_inet;
-+
-+	return nf_flow_table_init(&tbl->ft);
-+}
-+
-+static int __init xt_flowoffload_tg_init(void)
-+{
-+	int ret;
-+
-+	register_netdevice_notifier(&flow_offload_netdev_notifier);
-+
-+	ret = init_flowtable(&flowtable[0]);
-+	if (ret)
-+		return ret;
-+
-+	ret = init_flowtable(&flowtable[1]);
-+	if (ret)
-+		goto cleanup;
-+
-+	flowtable[1].ft.flags = NF_FLOWTABLE_HW_OFFLOAD;
-+
-+	ret = xt_register_target(&offload_tg_reg);
-+	if (ret)
-+		goto cleanup2;
-+
-+	return 0;
-+
-+cleanup2:
-+	nf_flow_table_free(&flowtable[1].ft);
-+cleanup:
-+	nf_flow_table_free(&flowtable[0].ft);
-+	return ret;
-+}
-+
-+static void __exit xt_flowoffload_tg_exit(void)
-+{
-+	xt_unregister_target(&offload_tg_reg);
-+	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
-+	nf_flow_table_free(&flowtable[0].ft);
-+	nf_flow_table_free(&flowtable[1].ft);
-+}
-+
-+MODULE_LICENSE("GPL");
-+module_init(xt_flowoffload_tg_init);
-+module_exit(xt_flowoffload_tg_exit);
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -7,7 +7,6 @@
- #include <linux/netdevice.h>
- #include <net/ip.h>
- #include <net/ip6_route.h>
--#include <net/netfilter/nf_tables.h>
- #include <net/netfilter/nf_flow_table.h>
- #include <net/netfilter/nf_conntrack.h>
- #include <net/netfilter/nf_conntrack_core.h>
-@@ -380,8 +379,7 @@ flow_offload_lookup(struct nf_flowtable
- }
- EXPORT_SYMBOL_GPL(flow_offload_lookup);
- 
--static int
--nf_flow_table_iterate(struct nf_flowtable *flow_table,
-+int nf_flow_table_iterate(struct nf_flowtable *flow_table,
- 		      void (*iter)(struct flow_offload *flow, void *data),
- 		      void *data)
- {
-@@ -413,6 +411,7 @@ nf_flow_table_iterate(struct nf_flowtabl
- 
- 	return err;
- }
-+EXPORT_SYMBOL_GPL(nf_flow_table_iterate);
- 
- static void nf_flow_offload_gc_step(struct flow_offload *flow, void *data)
- {
---- /dev/null
-+++ b/include/uapi/linux/netfilter/xt_FLOWOFFLOAD.h
-@@ -0,0 +1,17 @@
-+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-+#ifndef _XT_FLOWOFFLOAD_H
-+#define _XT_FLOWOFFLOAD_H
-+
-+#include <linux/types.h>
-+
-+enum {
-+	XT_FLOWOFFLOAD_HW	= 1 << 0,
-+
-+	XT_FLOWOFFLOAD_MASK	= XT_FLOWOFFLOAD_HW
-+};
-+
-+struct xt_flowoffload_target_info {
-+	__u32 flags;
-+};
-+
-+#endif /* _XT_FLOWOFFLOAD_H */
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -271,6 +271,10 @@ void nf_flow_table_free(struct nf_flowta
- 
- void flow_offload_teardown(struct flow_offload *flow);
- 
-+int nf_flow_table_iterate(struct nf_flowtable *flow_table,
-+			  void (*iter)(struct flow_offload *flow, void *data),
-+			  void *data);
-+
- void nf_flow_snat_port(const struct flow_offload *flow,
- 		       struct sk_buff *skb, unsigned int thoff,
- 		       u8 protocol, enum flow_offload_tuple_dir dir);
diff --git a/target/linux/generic/hack-5.10/651-wireless_mesh_header.patch b/target/linux/generic/hack-5.10/651-wireless_mesh_header.patch
deleted file mode 100644
index 0639ad4e4846..000000000000
--- a/target/linux/generic/hack-5.10/651-wireless_mesh_header.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 6d3bc769657b0ee7c7506dad9911111c4226a7ea Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Fri, 7 Jul 2017 17:21:05 +0200
-Subject: mac80211: increase wireless mesh header size
-
-lede-commit 3d4466cfd8f75f717efdb1f96fdde3c70d865fc1
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- include/linux/netdevice.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -144,8 +144,8 @@ static inline bool dev_xmit_complete(int
- 
- #if defined(CONFIG_HYPERV_NET)
- # define LL_MAX_HEADER 128
--#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25)
--# if defined(CONFIG_MAC80211_MESH)
-+#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25) || 1
-+# if defined(CONFIG_MAC80211_MESH) || 1
- #  define LL_MAX_HEADER 128
- # else
- #  define LL_MAX_HEADER 96
diff --git a/target/linux/generic/hack-5.10/660-fq_codel_defaults.patch b/target/linux/generic/hack-5.10/660-fq_codel_defaults.patch
deleted file mode 100644
index a57a045f4a83..000000000000
--- a/target/linux/generic/hack-5.10/660-fq_codel_defaults.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From a6ccb238939b25851474a279b20367fd24a0e816 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:21:53 +0200
-Subject:  hack: net: fq_codel: tune defaults for small devices
-
-Assume that x86_64 devices always have a big memory and do not need this 
-optimization compared to devices with only 32 MB or 64 MB RAM.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/sched/sch_fq_codel.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -467,7 +467,11 @@ static int fq_codel_init(struct Qdisc *s
- 
- 	sch->limit = 10*1024;
- 	q->flows_cnt = 1024;
-+#ifdef CONFIG_X86_64
- 	q->memory_limit = 32 << 20; /* 32 MBytes */
-+#else
-+	q->memory_limit = 4 << 20; /* 4 MBytes */
-+#endif
- 	q->drop_batch_size = 64;
- 	q->quantum = psched_mtu(qdisc_dev(sch));
- 	INIT_LIST_HEAD(&q->new_flows);
diff --git a/target/linux/generic/hack-5.10/661-kernel-ct-size-the-hashtable-more-adequately.patch b/target/linux/generic/hack-5.10/661-kernel-ct-size-the-hashtable-more-adequately.patch
deleted file mode 100644
index dd67c76b1312..000000000000
--- a/target/linux/generic/hack-5.10/661-kernel-ct-size-the-hashtable-more-adequately.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 804fbb3f2ec9283f7b778e057a68bfff440a0be6 Mon Sep 17 00:00:00 2001
-From: Rui Salvaterra <rsalvaterra@gmail.com>
-Date: Wed, 30 Mar 2022 22:51:55 +0100
-Subject: [PATCH] kernel: ct: size the hashtable more adequately
-
-To set the default size of the connection tracking hash table, a divider of
-16384 becomes inadequate for a router handling lots of connections. Divide by
-2048 instead, making the default size scale better with the available RAM.
-
-Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
----
- net/netfilter/nf_conntrack_core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -2576,7 +2576,7 @@ int nf_conntrack_init_start(void)
- 
- 	if (!nf_conntrack_htable_size) {
- 		nf_conntrack_htable_size
--			= (((nr_pages << PAGE_SHIFT) / 16384)
-+			= (((nr_pages << PAGE_SHIFT) / 2048)
- 			   / sizeof(struct hlist_head));
- 		if (BITS_PER_LONG >= 64 &&
- 		    nr_pages > (4 * (1024 * 1024 * 1024 / PAGE_SIZE)))
diff --git a/target/linux/generic/hack-5.10/700-swconfig_switch_drivers.patch b/target/linux/generic/hack-5.10/700-swconfig_switch_drivers.patch
deleted file mode 100644
index 48be4400256c..000000000000
--- a/target/linux/generic/hack-5.10/700-swconfig_switch_drivers.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From 36e516290611e613aa92996cb4339561452695b4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:24:23 +0200
-Subject: net: swconfig: adds openwrt switch layer
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/net/phy/Kconfig   | 83 +++++++++++++++++++++++++++++++++++++++++++++++
- drivers/net/phy/Makefile  | 15 +++++++++
- include/uapi/linux/Kbuild |  1 +
- 3 files changed, 99 insertions(+)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -61,6 +61,80 @@ config SFP
- 	depends on HWMON || HWMON=n
- 	select MDIO_I2C
- 
-+comment "Switch configuration API + drivers"
-+
-+config SWCONFIG
-+	tristate "Switch configuration API"
-+	help
-+	  Switch configuration API using netlink. This allows
-+	  you to configure the VLAN features of certain switches.
-+
-+config SWCONFIG_LEDS
-+	bool "Switch LED trigger support"
-+	depends on (SWCONFIG && LEDS_TRIGGERS)
-+
-+config ADM6996_PHY
-+	tristate "Driver for ADM6996 switches"
-+	select SWCONFIG
-+	help
-+	  Currently supports the ADM6996FC and ADM6996M switches.
-+	  Support for FC is very limited.
-+
-+config AR8216_PHY
-+	tristate "Driver for Atheros AR8216/8327 switches"
-+	select SWCONFIG
-+	select ETHERNET_PACKET_MANGLE
-+
-+config AR8216_PHY_LEDS
-+	bool "Atheros AR8216 switch LED support"
-+	depends on (AR8216_PHY && LEDS_CLASS)
-+
-+source "drivers/net/phy/b53/Kconfig"
-+
-+config IP17XX_PHY
-+	tristate "Driver for IC+ IP17xx switches"
-+	select SWCONFIG
-+
-+config PSB6970_PHY
-+	tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
-+	select SWCONFIG
-+
-+config RTL8306_PHY
-+	tristate "Driver for Realtek RTL8306S switches"
-+	select SWCONFIG
-+
-+config RTL8366_SMI
-+	tristate "Driver for the RTL8366 SMI interface"
-+	depends on GPIOLIB
-+	help
-+	  This module implements the SMI interface protocol which is used
-+	  by some RTL8366 ethernet switch devices via the generic GPIO API.
-+
-+if RTL8366_SMI
-+
-+config RTL8366_SMI_DEBUG_FS
-+	bool "RTL8366 SMI interface debugfs support"
-+        depends on DEBUG_FS
-+        default n
-+
-+config RTL8366S_PHY
-+	tristate "Driver for the Realtek RTL8366S switch"
-+	select SWCONFIG
-+
-+config RTL8366RB_PHY
-+	tristate "Driver for the Realtek RTL8366RB switch"
-+	select SWCONFIG
-+
-+config RTL8367_PHY
-+	tristate "Driver for the Realtek RTL8367R/M switches"
-+	select SWCONFIG
-+
-+config RTL8367B_PHY
-+	tristate "Driver fot the Realtek RTL8367R-VB switch"
-+	select SWCONFIG
-+
-+endif # RTL8366_SMI
-+
- comment "MII PHY device drivers"
- 
- config AMD_PHY
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -24,6 +24,21 @@ libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_
- obj-$(CONFIG_PHYLINK)		+= phylink.o
- obj-$(CONFIG_PHYLIB)		+= libphy.o
- 
-+obj-$(CONFIG_SWCONFIG)		+= swconfig.o
-+obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
-+obj-$(CONFIG_AR8216_PHY)	+= ar8xxx.o
-+ar8xxx-y			+= ar8216.o
-+ar8xxx-y			+= ar8327.o
-+obj-$(CONFIG_SWCONFIG_B53)	+= b53/
-+obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
-+obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
-+obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
-+obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
-+obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
-+obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
-+obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
-+obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
-+
- obj-$(CONFIG_NETWORK_PHY_TIMESTAMPING) += mii_timestamper.o
- 
- obj-$(CONFIG_SFP)		+= sfp.o
---- a/include/linux/platform_data/b53.h
-+++ b/include/linux/platform_data/b53.h
-@@ -29,6 +29,9 @@ struct b53_platform_data {
- 	u32 chip_id;
- 	u16 enabled_ports;
- 
-+	/* allow to specify an ethX alias */
-+	const char *alias;
-+
- 	/* only used by MMAP'd driver */
- 	unsigned big_endian:1;
- 	void __iomem *regs;
diff --git a/target/linux/generic/hack-5.10/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch b/target/linux/generic/hack-5.10/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch
deleted file mode 100644
index ef4635065d1e..000000000000
--- a/target/linux/generic/hack-5.10/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: DENG Qingfang <dqfext@gmail.com>
-Subject: DSA: roaming fix for Marvell mv88e6xxx
-
-Marvell mv88e6xxx switch series cannot perform MAC learning from
-CPU-injected (FROM_CPU) DSA frames, which results in 2 issues.
-- excessive flooding, due to the fact that DSA treats those addresses
-as unknown
-- the risk of stale routes, which can lead to temporary packet loss
-
-Backport those patch series from netdev mailing list, which solve these
-issues by adding and clearing static entries to the switch's FDB.
-
-Add a hack patch to set default VID to 1 in port_fdb_{add,del}. Otherwise
-the static entries will be added to the switch's private FDB if VLAN
-filtering disabled, which will not work.
-
-The switch may generate an "ATU violation" warning when a client moves
-from the CPU port to a switch port because the static ATU entry added by
-DSA core still points to the CPU port. DSA core will then clear the static
-entry so it is not fatal. Disable the warning so it will not confuse users.
-
-Link: https://lore.kernel.org/netdev/20210106095136.224739-1-olteanv@gmail.com/
-Link: https://lore.kernel.org/netdev/20210116012515.3152-1-tobias@waldekranz.com/
-Ref: https://gitlab.nic.cz/turris/turris-build/-/issues/165
-Submitted-by: DENG Qingfang <dqfext@gmail.com>
----
- drivers/net/dsa/mv88e6xxx/chip.c              | 3 +++
- 3 files changed, 3 insertions(+)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -2714,6 +2714,9 @@ static int mv88e6xxx_setup_port(struct m
- 	if (dsa_is_cpu_port(ds, port))
- 		reg = 0;
- 
-+	/* Disable ATU member violation interrupt */
-+	reg |= MV88E6XXX_PORT_ASSOC_VECTOR_IGNORE_WRONG;
-+
- 	err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_ASSOC_VECTOR,
- 				   reg);
- 	if (err)
diff --git a/target/linux/generic/hack-5.10/720-net-phy-add-aqr-phys.patch b/target/linux/generic/hack-5.10/720-net-phy-add-aqr-phys.patch
deleted file mode 100644
index e90447e0cbba..000000000000
--- a/target/linux/generic/hack-5.10/720-net-phy-add-aqr-phys.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From: Birger Koblitz <git@birger-koblitz.de>
-Date: Sun, 5 Sep 2021 15:13:10 +0200
-Subject: [PATCH] kernel: Add AQR113C and AQR813 support
-
-This hack adds support for the Aquantia 4th generation, 10GBit
-PHYs AQR113C and AQR813.
-
-Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
-
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -20,8 +20,10 @@
- #define PHY_ID_AQR105	0x03a1b4a2
- #define PHY_ID_AQR106	0x03a1b4d0
- #define PHY_ID_AQR107	0x03a1b4e0
-+#define PHY_ID_AQR113C	0x31c31c12
- #define PHY_ID_AQCS109	0x03a1b5c2
- #define PHY_ID_AQR405	0x03a1b4b0
-+#define PHY_ID_AQR813	0x31c31cb2
- 
- #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
- #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
-@@ -352,6 +354,49 @@ static int aqr107_read_rate(struct phy_d
- 	return 0;
- }
- 
-+static int aqr113c_read_status(struct phy_device *phydev)
-+{
-+	int val, ret;
-+
-+	ret = aqr_read_status(phydev);
-+	if (ret)
-+		return ret;
-+
-+	if (!phydev->link || phydev->autoneg == AUTONEG_DISABLE)
-+		return 0;
-+
-+	// On AQR113C, the speed returned by aqr_read_status is wrong
-+	aqr107_read_rate(phydev);
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_VEND_IF_STATUS);
-+	if (val < 0)
-+		return val;
-+
-+	switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) {
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
-+		phydev->interface = PHY_INTERFACE_MODE_10GKR;
-+		break;
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
-+		phydev->interface = PHY_INTERFACE_MODE_10GBASER;
-+		break;
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
-+		phydev->interface = PHY_INTERFACE_MODE_USXGMII;
-+		break;
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
-+		phydev->interface = PHY_INTERFACE_MODE_SGMII;
-+		break;
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
-+		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
-+		break;
-+	default:
-+		phydev->interface = PHY_INTERFACE_MODE_NA;
-+		break;
-+	}
-+
-+	/* Read downshifted rate from vendor register */
-+	return aqr107_read_rate(phydev);
-+}
-+
- static int aqr107_read_status(struct phy_device *phydev)
- {
- 	int val, ret;
-@@ -482,7 +527,7 @@ static void aqr107_chip_info(struct phy_
- 	build_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID, val);
- 	prov_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_PROV_ID, val);
- 
--	phydev_dbg(phydev, "FW %u.%u, Build %u, Provisioning %u\n",
-+	phydev_info(phydev, "FW %u.%u, Build %u, Provisioning %u\n",
- 		   fw_major, fw_minor, build_id, prov_id);
- }
- 
-@@ -690,6 +735,24 @@ static struct phy_driver aqr_driver[] =
- 	.link_change_notify = aqr107_link_change_notify,
- },
- {
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
-+	.name		= "Aquantia AQR113C",
-+	.probe		= aqr107_probe,
-+	.config_init	= aqr107_config_init,
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.ack_interrupt	= aqr_ack_interrupt,
-+	.read_status	= aqr113c_read_status,
-+	.get_tunable    = aqr107_get_tunable,
-+	.set_tunable    = aqr107_set_tunable,
-+	.suspend	= aqr107_suspend,
-+	.resume		= aqr107_resume,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+	.link_change_notify = aqr107_link_change_notify,
-+},
-+{
- 	PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
- 	.name		= "Aquantia AQCS109",
- 	.probe		= aqr107_probe,
-@@ -715,6 +778,24 @@ static struct phy_driver aqr_driver[] =
- 	.ack_interrupt	= aqr_ack_interrupt,
- 	.read_status	= aqr_read_status,
- },
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR813),
-+	.name		= "Aquantia AQR813",
-+	.probe		= aqr107_probe,
-+	.config_init	= aqr107_config_init,
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.ack_interrupt	= aqr_ack_interrupt,
-+	.read_status	= aqr113c_read_status,
-+	.get_tunable    = aqr107_get_tunable,
-+	.set_tunable    = aqr107_set_tunable,
-+	.suspend	= aqr107_suspend,
-+	.resume		= aqr107_resume,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+	.link_change_notify = aqr107_link_change_notify,
-+},
- };
- 
- module_phy_driver(aqr_driver);
-@@ -725,8 +806,10 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR105) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
- 	{ }
- };
- 
diff --git a/target/linux/generic/hack-5.10/721-net-add-packet-mangeling.patch b/target/linux/generic/hack-5.10/721-net-add-packet-mangeling.patch
deleted file mode 100644
index fed3848a9c53..000000000000
--- a/target/linux/generic/hack-5.10/721-net-add-packet-mangeling.patch
+++ /dev/null
@@ -1,167 +0,0 @@
-From ffe387740bbe88dd88bbe04d6375902708003d6e Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:25:00 +0200
-Subject: net: add packet mangeling
-
-ar8216 switches have a hardware bug, which renders normal 802.1q support
-unusable. Packet mangling is required to fix up the vlan for incoming
-packets.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/netdevice.h | 11 +++++++++++
- include/linux/skbuff.h    | 14 ++++----------
- net/Kconfig               |  6 ++++++
- net/core/dev.c            | 20 +++++++++++++++-----
- net/core/skbuff.c         | 17 +++++++++++++++++
- net/ethernet/eth.c        |  6 ++++++
- 6 files changed, 59 insertions(+), 15 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1648,6 +1648,7 @@ enum netdev_priv_flags {
- 	IFF_FAILOVER_SLAVE		= 1<<28,
- 	IFF_L3MDEV_RX_HANDLER		= 1<<29,
- 	IFF_LIVE_RENAME_OK		= 1<<30,
-+	IFF_NO_IP_ALIGN			= 1<<31,
- };
- 
- #define IFF_802_1Q_VLAN			IFF_802_1Q_VLAN
-@@ -1680,6 +1681,7 @@ enum netdev_priv_flags {
- #define IFF_FAILOVER_SLAVE		IFF_FAILOVER_SLAVE
- #define IFF_L3MDEV_RX_HANDLER		IFF_L3MDEV_RX_HANDLER
- #define IFF_LIVE_RENAME_OK		IFF_LIVE_RENAME_OK
-+#define IFF_NO_IP_ALIGN			IFF_NO_IP_ALIGN
- 
- /* Specifies the type of the struct net_device::ml_priv pointer */
- enum netdev_ml_priv_type {
-@@ -2020,6 +2022,11 @@ struct net_device {
- 	const struct tlsdev_ops *tlsdev_ops;
- #endif
- 
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb);
-+	struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb);
-+#endif
-+
- 	const struct header_ops *header_ops;
- 
- 	unsigned int		flags;
-@@ -2110,6 +2117,10 @@ struct net_device {
- 	struct mpls_dev __rcu	*mpls_ptr;
- #endif
- 
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	void			*phy_ptr; /* PHY device specific data */
-+#endif
-+
- /*
-  * Cache lines mostly used on receive path (including eth_type_trans())
-  */
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2728,6 +2728,10 @@ static inline int pskb_trim(struct sk_bu
- 	return (len < skb->len) ? __pskb_trim(skb, len) : 0;
- }
- 
-+extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+		unsigned int length, gfp_t gfp);
-+
-+
- /**
-  *	pskb_trim_unique - remove end from a paged unique (not cloned) buffer
-  *	@skb: buffer to alter
-@@ -2859,16 +2863,6 @@ static inline struct sk_buff *dev_alloc_
- }
- 
- 
--static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
--		unsigned int length, gfp_t gfp)
--{
--	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
--
--	if (NET_IP_ALIGN && skb)
--		skb_reserve(skb, NET_IP_ALIGN);
--	return skb;
--}
--
- static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
- 		unsigned int length)
- {
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -26,6 +26,12 @@ menuconfig NET
- 
- if NET
- 
-+config ETHERNET_PACKET_MANGLE
-+	bool
-+	help
-+	  This option can be selected by phy drivers that need to mangle
-+	  packets going in or out of an ethernet device.
-+
- config WANT_COMPAT_NETLINK_MESSAGES
- 	bool
- 	help
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -3656,6 +3656,11 @@ static int xmit_one(struct sk_buff *skb,
- 	if (dev_nit_active(dev))
- 		dev_queue_xmit_nit(skb, dev);
- 
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (dev->eth_mangle_tx && !(skb = dev->eth_mangle_tx(dev, skb)))
-+		return NETDEV_TX_OK;
-+#endif
-+
- 	len = skb->len;
- 	PRANDOM_ADD_NOISE(skb, dev, txq, len + jiffies);
- 	trace_net_dev_start_xmit(skb, dev);
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -60,6 +60,7 @@
- #include <linux/prefetch.h>
- #include <linux/if_vlan.h>
- #include <linux/mpls.h>
-+#include <linux/if.h>
- 
- #include <net/protocol.h>
- #include <net/dst.h>
-@@ -553,6 +554,22 @@ skb_fail:
- }
- EXPORT_SYMBOL(__napi_alloc_skb);
- 
-+struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+		unsigned int length, gfp_t gfp)
-+{
-+	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (dev && (dev->priv_flags & IFF_NO_IP_ALIGN))
-+		return skb;
-+#endif
-+
-+	if (NET_IP_ALIGN && skb)
-+		skb_reserve(skb, NET_IP_ALIGN);
-+	return skb;
-+}
-+EXPORT_SYMBOL(__netdev_alloc_skb_ip_align);
-+
- void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off,
- 		     int size, unsigned int truesize)
- {
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -171,6 +171,12 @@ __be16 eth_type_trans(struct sk_buff *sk
- 	const struct ethhdr *eth;
- 
- 	skb->dev = dev;
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (dev->eth_mangle_rx)
-+		dev->eth_mangle_rx(dev, skb);
-+#endif
-+
- 	skb_reset_mac_header(skb);
- 
- 	eth = (struct ethhdr *)skb->data;
diff --git a/target/linux/generic/hack-5.10/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch b/target/linux/generic/hack-5.10/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch
deleted file mode 100644
index 42bf8951d6a6..000000000000
--- a/target/linux/generic/hack-5.10/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch
+++ /dev/null
@@ -1,154 +0,0 @@
-From 5f62951fba63a9f9cfff564209426bdea5fcc371 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Tue, 27 Aug 2019 15:16:56 +0300
-Subject: [PATCH] drivers: net: phy: aquantia: enable AQR112 and AQR412
-
-Adds support for AQR112 and AQR412 which is mostly based on existing code
-with the addition of code configuring the protocol on system side.
-This allows changing the system side protocol without having to deploy a
-different firmware on the PHY.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/phy/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 88 insertions(+)
-
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -20,9 +20,11 @@
- #define PHY_ID_AQR105	0x03a1b4a2
- #define PHY_ID_AQR106	0x03a1b4d0
- #define PHY_ID_AQR107	0x03a1b4e0
-+#define PHY_ID_AQR112	0x03a1b662
- #define PHY_ID_AQR113C	0x31c31c12
- #define PHY_ID_AQCS109	0x03a1b5c2
- #define PHY_ID_AQR405	0x03a1b4b0
-+#define PHY_ID_AQR412	0x03a1b712
- #define PHY_ID_AQR813	0x31c31cb2
- 
- #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
-@@ -134,6 +136,29 @@
- #define AQR107_OP_IN_PROG_SLEEP		1000
- #define AQR107_OP_IN_PROG_TIMEOUT	100000
- 
-+/* registers in MDIO_MMD_VEND1 region */
-+#define AQUANTIA_VND1_GLOBAL_SC			0x000
-+#define  AQUANTIA_VND1_GLOBAL_SC_LP		BIT(0xb)
-+
-+/* global start rate, the protocol associated with this speed is used by default
-+ * on SI.
-+ */
-+#define AQUANTIA_VND1_GSTART_RATE		0x31a
-+#define  AQUANTIA_VND1_GSTART_RATE_OFF		0
-+#define  AQUANTIA_VND1_GSTART_RATE_100M		1
-+#define  AQUANTIA_VND1_GSTART_RATE_1G		2
-+#define  AQUANTIA_VND1_GSTART_RATE_10G		3
-+#define  AQUANTIA_VND1_GSTART_RATE_2_5G		4
-+#define  AQUANTIA_VND1_GSTART_RATE_5G		5
-+
-+/* SYSCFG registers for 100M, 1G, 2.5G, 5G, 10G */
-+#define AQUANTIA_VND1_GSYSCFG_BASE		0x31b
-+#define AQUANTIA_VND1_GSYSCFG_100M		0
-+#define AQUANTIA_VND1_GSYSCFG_1G		1
-+#define AQUANTIA_VND1_GSYSCFG_2_5G		2
-+#define AQUANTIA_VND1_GSYSCFG_5G		3
-+#define AQUANTIA_VND1_GSYSCFG_10G		4
-+
- struct aqr107_hw_stat {
- 	const char *name;
- 	int reg;
-@@ -265,6 +290,51 @@ static int aqr_config_aneg(struct phy_de
- 	return genphy_c45_check_and_restart_aneg(phydev, changed);
- }
- 
-+static struct {
-+	u16 syscfg;
-+	int cnt;
-+	u16 start_rate;
-+} aquantia_syscfg[PHY_INTERFACE_MODE_MAX] = {
-+	[PHY_INTERFACE_MODE_SGMII] =      {0x04b, AQUANTIA_VND1_GSYSCFG_1G,
-+					   AQUANTIA_VND1_GSTART_RATE_1G},
-+	[PHY_INTERFACE_MODE_2500BASEX] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G,
-+					   AQUANTIA_VND1_GSTART_RATE_2_5G},
-+	[PHY_INTERFACE_MODE_XGMII] =      {0x100, AQUANTIA_VND1_GSYSCFG_10G,
-+					   AQUANTIA_VND1_GSTART_RATE_10G},
-+	[PHY_INTERFACE_MODE_USXGMII] =    {0x080, AQUANTIA_VND1_GSYSCFG_10G,
-+					   AQUANTIA_VND1_GSTART_RATE_10G},
-+};
-+
-+/* Sets up protocol on system side before calling aqr_config_aneg */
-+static int aqr_config_aneg_set_prot(struct phy_device *phydev)
-+{
-+	int if_type = phydev->interface;
-+	int i;
-+
-+	if (!aquantia_syscfg[if_type].cnt)
-+		return 0;
-+
-+	/* set PHY in low power mode so we can configure protocols */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC,
-+		      AQUANTIA_VND1_GLOBAL_SC_LP);
-+	mdelay(10);
-+
-+	/* set the default rate to enable the SI link */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
-+		      aquantia_syscfg[if_type].start_rate);
-+
-+	for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++)
-+		phy_write_mmd(phydev, MDIO_MMD_VEND1,
-+			      AQUANTIA_VND1_GSYSCFG_BASE + i,
-+			      aquantia_syscfg[if_type].syscfg);
-+
-+	/* wake PHY back up */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
-+	mdelay(10);
-+
-+	return aqr_config_aneg(phydev);
-+}
-+
- static int aqr_config_intr(struct phy_device *phydev)
- {
- 	bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
-@@ -796,6 +866,30 @@ static struct phy_driver aqr_driver[] =
- 	.get_stats	= aqr107_get_stats,
- 	.link_change_notify = aqr107_link_change_notify,
- },
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
-+	.name		= "Aquantia AQR112",
-+	.probe		= aqr107_probe,
-+	.config_aneg	= aqr_config_aneg_set_prot,
-+	.config_intr	= aqr_config_intr,
-+	.ack_interrupt	= aqr_ack_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
-+	.name		= "Aquantia AQR412",
-+	.probe		= aqr107_probe,
-+	.config_aneg	= aqr_config_aneg_set_prot,
-+	.config_intr	= aqr_config_intr,
-+	.ack_interrupt	= aqr_ack_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+},
- };
- 
- module_phy_driver(aqr_driver);
-@@ -806,9 +900,11 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR105) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
- 	{ }
- };
diff --git a/target/linux/generic/hack-5.10/723-net-phy-aquantia-fix-system-side-protocol-mi.patch b/target/linux/generic/hack-5.10/723-net-phy-aquantia-fix-system-side-protocol-mi.patch
deleted file mode 100644
index c65f273a8a2d..000000000000
--- a/target/linux/generic/hack-5.10/723-net-phy-aquantia-fix-system-side-protocol-mi.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 5f008cb22f60da4e10375f22266c1a4e20b1252e Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Fri, 20 Sep 2019 18:22:52 +0300
-Subject: [PATCH] drivers: net: phy: aquantia: fix system side protocol
- misconfiguration
-
-Do not set up protocols for speeds that are not supported by FW.  Enabling
-these protocols leads to link issues on system side.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/phy/aquantia_main.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -323,10 +323,16 @@ static int aqr_config_aneg_set_prot(stru
- 	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
- 		      aquantia_syscfg[if_type].start_rate);
- 
--	for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++)
-+	for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++) {
-+		u16 reg = phy_read_mmd(phydev, MDIO_MMD_VEND1,
-+				       AQUANTIA_VND1_GSYSCFG_BASE + i);
-+		if (!reg)
-+			continue;
-+
- 		phy_write_mmd(phydev, MDIO_MMD_VEND1,
- 			      AQUANTIA_VND1_GSYSCFG_BASE + i,
- 			      aquantia_syscfg[if_type].syscfg);
-+	}
- 
- 	/* wake PHY back up */
- 	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
diff --git a/target/linux/generic/hack-5.10/724-net-phy-aquantia-Add-AQR113-driver-support.patch b/target/linux/generic/hack-5.10/724-net-phy-aquantia-Add-AQR113-driver-support.patch
deleted file mode 100644
index 8fd3b018b433..000000000000
--- a/target/linux/generic/hack-5.10/724-net-phy-aquantia-Add-AQR113-driver-support.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 2e677e4ae8f8330f68013163b060d0fda3a43095 Mon Sep 17 00:00:00 2001
-From: "Langer, Thomas" <tlanger@maxlinear.com>
-Date: Fri, 9 Jul 2021 17:36:46 +0200
-Subject: [PATCH] PONRTSYS-8842: aquantia: Add AQR113 driver support
-
-Add a new entry for AQR113 PHY_ID
----
- drivers/net/phy/aquantia_main.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -21,6 +21,7 @@
- #define PHY_ID_AQR106	0x03a1b4d0
- #define PHY_ID_AQR107	0x03a1b4e0
- #define PHY_ID_AQR112	0x03a1b662
-+#define PHY_ID_AQR113	0x31c31c40
- #define PHY_ID_AQR113C	0x31c31c12
- #define PHY_ID_AQCS109	0x03a1b5c2
- #define PHY_ID_AQR405	0x03a1b4b0
-@@ -885,6 +886,14 @@ static struct phy_driver aqr_driver[] =
- 	.get_stats	= aqr107_get_stats,
- },
- {
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
-+	.name		= "Aquantia AQR113",
-+	.config_aneg	= aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.ack_interrupt	= aqr_ack_interrupt,
-+	.read_status	= aqr107_read_status,
-+},
-+{
- 	PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
- 	.name		= "Aquantia AQR412",
- 	.probe		= aqr107_probe,
-@@ -907,6 +916,7 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
diff --git a/target/linux/generic/hack-5.10/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch b/target/linux/generic/hack-5.10/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch
deleted file mode 100644
index f2db552a1e0d..000000000000
--- a/target/linux/generic/hack-5.10/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 3b92ee7b7899b6beffb2b484c58326e36612a873 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 23 Dec 2021 14:52:56 +0000
-Subject: [PATCH] net: phy: aquantia: add PHY_ID for AQR112R
-
-As advised by Ian Chang this PHY is used in Puzzle devices.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/phy/aquantia_main.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -21,6 +21,8 @@
- #define PHY_ID_AQR106	0x03a1b4d0
- #define PHY_ID_AQR107	0x03a1b4e0
- #define PHY_ID_AQR112	0x03a1b662
-+#define PHY_ID_AQR112C	0x03a1b790
-+#define PHY_ID_AQR112R	0x31c31d12
- #define PHY_ID_AQR113	0x31c31c40
- #define PHY_ID_AQR113C	0x31c31c12
- #define PHY_ID_AQCS109	0x03a1b5c2
-@@ -886,6 +888,30 @@ static struct phy_driver aqr_driver[] =
- 	.get_stats	= aqr107_get_stats,
- },
- {
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR112C),
-+	.name		= "Aquantia AQR112C",
-+	.probe		= aqr107_probe,
-+	.config_aneg	= aqr_config_aneg_set_prot,
-+	.config_intr	= aqr_config_intr,
-+	.ack_interrupt	= aqr_ack_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR112R),
-+	.name		= "Aquantia AQR112R",
-+	.probe		= aqr107_probe,
-+	.config_aneg	= aqr_config_aneg_set_prot,
-+	.config_intr	= aqr_config_intr,
-+	.ack_interrupt	= aqr_ack_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+},
-+{
- 	PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
- 	.name		= "Aquantia AQR113",
- 	.config_aneg	= aqr_config_aneg,
-@@ -916,6 +942,8 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112C) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112R) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
diff --git a/target/linux/generic/hack-5.10/760-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/generic/hack-5.10/760-net-usb-r8152-add-LED-configuration-from-OF.patch
deleted file mode 100644
index 51b4d87e6caf..000000000000
--- a/target/linux/generic/hack-5.10/760-net-usb-r8152-add-LED-configuration-from-OF.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 02:38:31 +0200
-Subject: [PATCH] net: usb: r8152: add LED configuration from OF
-
-This adds the ability to configure the LED configuration register using
-OF. This way, the correct value for board specific LED configuration can
-be determined.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -11,6 +11,7 @@
- #include <linux/mii.h>
- #include <linux/ethtool.h>
- #include <linux/usb.h>
-+#include <linux/of.h>
- #include <linux/crc32.h>
- #include <linux/if_vlan.h>
- #include <linux/uaccess.h>
-@@ -6782,6 +6783,22 @@ static void rtl_tally_reset(struct r8152
- 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
- }
- 
-+static int r8152_led_configuration(struct r8152 *tp)
-+{
-+	u32 led_data;
-+	int ret;
-+
-+	ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data",
-+								&led_data);
-+
-+	if (ret)
-+		return ret;
-+
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data);
-+
-+	return 0;
-+}
-+
- static void r8152b_init(struct r8152 *tp)
- {
- 	u32 ocp_data;
-@@ -6823,6 +6840,8 @@ static void r8152b_init(struct r8152 *tp
- 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
- 	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
- 	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+	r8152_led_configuration(tp);
- }
- 
- static void r8153_init(struct r8152 *tp)
-@@ -6963,6 +6982,8 @@ static void r8153_init(struct r8152 *tp)
- 		tp->coalesce = COALESCE_SLOW;
- 		break;
- 	}
-+
-+	r8152_led_configuration(tp);
- }
- 
- static void r8153b_init(struct r8152 *tp)
-@@ -7045,6 +7066,8 @@ static void r8153b_init(struct r8152 *tp
- 	rtl_tally_reset(tp);
- 
- 	tp->coalesce = 15000;	/* 15 us */
-+
-+	r8152_led_configuration(tp);
- }
- 
- static void r8153c_init(struct r8152 *tp)
diff --git a/target/linux/generic/hack-5.10/761-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/generic/hack-5.10/761-dt-bindings-net-add-RTL8152-binding-documentation.patch
deleted file mode 100644
index be262b993cd5..000000000000
--- a/target/linux/generic/hack-5.10/761-dt-bindings-net-add-RTL8152-binding-documentation.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 15:30:33 +0200
-Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation
-
-Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet
-adapters.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- .../bindings/net/realtek,rtl8152.yaml         | 36 +++++++++++++++++++
- 1 file changed, 36 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
-@@ -0,0 +1,36 @@
-+# SPDX-License-Identifier: GPL-2.0
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Realtek RTL8152/RTL8153 series USB ethernet
-+
-+maintainers:
-+  - David Bauer <mail@david-bauer.net>
-+
-+properties:
-+  compatible:
-+    oneOf:
-+      - items:
-+          - enum:
-+              - realtek,rtl8152
-+              - realtek,rtl8153
-+
-+  reg:
-+    description: The device number on the USB bus
-+
-+  realtek,led-data:
-+    description: Value to be written to the LED configuration register.
-+
-+required:
-+  - compatible
-+  - reg
-+
-+examples:
-+  - |
-+    usb-eth@2 {
-+      compatible = "realtek,rtl8153";
-+      reg = <2>;
-+      realtek,led-data = <0x87>;
-+    };
-\ No newline at end of file
diff --git a/target/linux/generic/hack-5.10/773-bgmac-add-srab-switch.patch b/target/linux/generic/hack-5.10/773-bgmac-add-srab-switch.patch
deleted file mode 100644
index fcd9678d05f2..000000000000
--- a/target/linux/generic/hack-5.10/773-bgmac-add-srab-switch.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 3cb240533ab787899dc7f17aa7d6c5b4810e2e58 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 7 Jul 2017 17:26:01 +0200
-Subject: bcm53xx: bgmac: use srab switch driver
-
-use the srab switch driver on these SoCs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/net/ethernet/broadcom/bgmac-bcma.c |  1 +
- drivers/net/ethernet/broadcom/bgmac.c      | 24 ++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/bgmac.h      |  4 ++++
- 3 files changed, 29 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -280,6 +280,7 @@ static int bgmac_probe(struct bcma_devic
- 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
- 		bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
- 		bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
-+		bgmac->feature_flags |= BGMAC_FEAT_SRAB;
- 		break;
- 	default:
- 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -12,6 +12,7 @@
- #include <linux/bcma/bcma.h>
- #include <linux/etherdevice.h>
- #include <linux/interrupt.h>
-+#include <linux/platform_data/b53.h>
- #include <linux/bcm47xx_nvram.h>
- #include <linux/phy.h>
- #include <linux/phy_fixed.h>
-@@ -1408,6 +1409,17 @@ static const struct ethtool_ops bgmac_et
- 	.set_link_ksettings     = phy_ethtool_set_link_ksettings,
- };
- 
-+static struct b53_platform_data bgmac_b53_pdata = {
-+};
-+
-+static struct platform_device bgmac_b53_dev = {
-+	.name		= "b53-srab-switch",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data = &bgmac_b53_pdata,
-+	},
-+};
-+
- /**************************************************
-  * MII
-  **************************************************/
-@@ -1546,6 +1558,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
- 
- 	bgmac->in_init = false;
- 
-+	if ((bgmac->feature_flags & BGMAC_FEAT_SRAB) && !bgmac_b53_pdata.regs) {
-+		bgmac_b53_pdata.regs = ioremap(0x18007000, 0x1000);
-+
-+		err = platform_device_register(&bgmac_b53_dev);
-+		if (!err)
-+			bgmac->b53_device = &bgmac_b53_dev;
-+	}
-+
- 	err = register_netdev(bgmac->net_dev);
- 	if (err) {
- 		dev_err(bgmac->dev, "Cannot register net device\n");
-@@ -1568,6 +1588,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
- 
- void bgmac_enet_remove(struct bgmac *bgmac)
- {
-+	if (bgmac->b53_device)
-+		platform_device_unregister(&bgmac_b53_dev);
-+	bgmac->b53_device = NULL;
-+
- 	unregister_netdev(bgmac->net_dev);
- 	phy_disconnect(bgmac->net_dev->phydev);
- 	netif_napi_del(&bgmac->napi);
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -428,6 +428,7 @@
- #define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII	BIT(18)
- #define BGMAC_FEAT_CC7_IF_TYPE_RGMII	BIT(19)
- #define BGMAC_FEAT_IDM_MASK		BIT(20)
-+#define BGMAC_FEAT_SRAB			BIT(21)
- 
- struct bgmac_slot_info {
- 	union {
-@@ -535,6 +536,9 @@ struct bgmac {
- 	void (*cmn_maskset32)(struct bgmac *bgmac, u16 offset, u32 mask,
- 			      u32 set);
- 	int (*phy_connect)(struct bgmac *bgmac);
-+
-+	/* platform device for associated switch */
-+	struct platform_device *b53_device;
- };
- 
- struct bgmac *bgmac_alloc(struct device *dev);
diff --git a/target/linux/generic/hack-5.10/780-usb-net-MeigLink_modem_support.patch b/target/linux/generic/hack-5.10/780-usb-net-MeigLink_modem_support.patch
deleted file mode 100644
index 3b8655fa6e9d..000000000000
--- a/target/linux/generic/hack-5.10/780-usb-net-MeigLink_modem_support.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: wwan: Add MeigLink SLM750 modem support
-
-Add patch found in Teltonika RUT9_R_00.07.01.4 GPL SDK download[1]
-adding USB IDs of the MeigLink SLM750 to the relevant kernel drivers.
-Newer versions of Teltonika's 2G/3G/4G RUT9XX WWAN router series come
-with this kind of modem.
-
-[1]: https://wiki.teltonika-networks.com/view/GPL
-Submitted-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/usb/qmi_wwan.c                    | 8 ++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/net/usb/qmi_wwan.c
-+++ b/drivers/net/usb/qmi_wwan.c
-@@ -1025,6 +1025,7 @@ static const struct usb_device_id produc
- 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)},	/* Quectel EM160R-GL */
- 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)},	/* Quectel RM500Q-GL */
- 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0801)},	/* Quectel RM520N */
-+	{QMI_MATCH_FF_FF_FF(0x05c6, 0xf601)},   /* MeigLink SLM750 */
- 
- 	/* 3. Combined interface devices matching on interface number */
- 	{QMI_FIXED_INTF(0x0408, 0xea42, 4)},	/* Yota / Megafon M100-1 */
---- a/drivers/usb/serial/option.c
-+++ b/drivers/usb/serial/option.c
-@@ -244,6 +244,8 @@ static void option_instat_callback(struc
- #define UBLOX_PRODUCT_R410M			0x90b2
- /* These Yuga products use Qualcomm's vendor ID */
- #define YUGA_PRODUCT_CLM920_NC5			0x9625
-+/* These MeigLink products use Qualcomm's vendor ID */
-+#define MEIGLINK_PRODUCT_SLM750			0xf601
- 
- #define QUECTEL_VENDOR_ID			0x2c7c
- /* These Quectel products use Quectel's vendor ID */
-@@ -1164,6 +1166,11 @@ static const struct usb_device_id option
- 	  .driver_info = ZLP },
- 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
- 	  .driver_info = RSVD(4) },
-+	/* Meiglink products using Qualcomm vendor ID */
-+	// Works OK. In case of some issues check macros that are used by Quectel Products
-+	{ USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, MEIGLINK_PRODUCT_SLM750, 0xff, 0xff, 0xff),
-+	  .driver_info = NUMEP2 },
-+	{ USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, MEIGLINK_PRODUCT_SLM750, 0xff, 0, 0) },
- 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
- 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
- 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
diff --git a/target/linux/generic/hack-5.10/800-GPIO-add-named-gpio-exports.patch b/target/linux/generic/hack-5.10/800-GPIO-add-named-gpio-exports.patch
deleted file mode 100644
index 6367ee9a0b6a..000000000000
--- a/target/linux/generic/hack-5.10/800-GPIO-add-named-gpio-exports.patch
+++ /dev/null
@@ -1,162 +0,0 @@
-From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 30/36] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -19,6 +19,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
- 
- #include "gpiolib.h"
- #include "gpiolib-of.h"
-@@ -1046,3 +1048,72 @@ void of_gpiochip_remove(struct gpio_chip
- {
- 	of_node_put(chip->of_node);
- }
-+
-+#ifdef CONFIG_GPIO_SYSFS
-+
-+static struct of_device_id gpio_export_ids[] = {
-+	{ .compatible = "gpio-export" },
-+	{ /* sentinel */ }
-+};
-+
-+static int of_gpio_export_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct device_node *cnp;
-+	u32 val;
-+	int nb = 0;
-+
-+	for_each_child_of_node(np, cnp) {
-+		const char *name = NULL;
-+		int gpio;
-+		bool dmc;
-+		int max_gpio = 1;
-+		int i;
-+
-+		of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+		if (!name)
-+			max_gpio = of_gpio_count(cnp);
-+
-+		for (i = 0; i < max_gpio; i++) {
-+			unsigned flags = 0;
-+			enum of_gpio_flags of_flags;
-+
-+			gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+			if (!gpio_is_valid(gpio))
-+				return gpio;
-+
-+			if (of_flags == OF_GPIO_ACTIVE_LOW)
-+				flags |= GPIOF_ACTIVE_LOW;
-+
-+			if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+				flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+			else
-+				flags |= GPIOF_IN;
-+
-+			if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+				continue;
-+
-+			dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+			gpio_export_with_name(gpio, dmc, name);
-+			nb++;
-+		}
-+	}
-+
-+	dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+	.driver		= {
-+		.name		= "gpio-export",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(gpio_export_ids),
-+	},
-+	.probe		= of_gpio_export_probe,
-+};
-+
-+module_platform_driver(gpio_export_driver);
-+
-+#endif
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -125,6 +125,12 @@ static inline int gpio_export(unsigned g
- 	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
- 
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+	return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- 				   unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -715,6 +715,7 @@ static inline void devm_acpi_dev_remove_
- 
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
- 
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- 		      struct gpio_desc *desc);
-@@ -722,6 +723,13 @@ void gpiod_unexport(struct gpio_desc *de
- 
- #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
- 
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+			       bool direction_may_change,
-+			       const char *name)
-+{
-+	return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- 			       bool direction_may_change)
- {
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -572,7 +572,7 @@ static struct class gpio_class = {
-  *
-  * Returns zero on success, else an error.
-  */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- 	struct gpio_chip	*chip;
- 	struct gpio_device	*gdev;
-@@ -634,6 +634,8 @@ int gpiod_export(struct gpio_desc *desc,
- 	offset = gpio_chip_hwgpio(desc);
- 	if (chip->names && chip->names[offset])
- 		ioname = chip->names[offset];
-+	if (name)
-+		ioname = name;
- 
- 	dev = device_create_with_groups(&gpio_class, &gdev->dev,
- 					MKDEV(0, 0), data, gpio_groups,
-@@ -655,6 +657,12 @@ err_unlock:
- 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- 	return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+	return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
- 
- static int match_export(struct device *dev, const void *desc)
diff --git a/target/linux/generic/hack-5.10/810-bcma-ssb-fallback-sprom.patch b/target/linux/generic/hack-5.10/810-bcma-ssb-fallback-sprom.patch
deleted file mode 100644
index eea727021181..000000000000
--- a/target/linux/generic/hack-5.10/810-bcma-ssb-fallback-sprom.patch
+++ /dev/null
@@ -1,169 +0,0 @@
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -38,6 +38,10 @@ int bcma_bus_resume(struct bcma_bus *bus
- void bcma_detect_chip(struct bcma_bus *bus);
- int bcma_bus_scan(struct bcma_bus *bus);
- 
-+/* fallback-sprom.c */
-+int __init bcma_fbs_register(void);
-+int bcma_get_fallback_sprom(struct bcma_bus *dev, struct ssb_sprom *out);
-+
- /* sprom.c */
- int bcma_sprom_get(struct bcma_bus *bus);
- 
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -18,6 +18,10 @@ config BCMA_BLOCKIO
- 	bool
- 	default y
- 
-+config BCMA_FALLBACK_SPROM
-+	bool
-+	default y
-+
- config BCMA_HOST_PCI_POSSIBLE
- 	bool
- 	depends on PCI = y
---- a/drivers/bcma/Makefile
-+++ b/drivers/bcma/Makefile
-@@ -11,6 +11,7 @@ bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)
- bcma-$(CONFIG_BCMA_DRIVER_MIPS)		+= driver_mips.o
- bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN)	+= driver_gmac_cmn.o
- bcma-$(CONFIG_BCMA_DRIVER_GPIO)		+= driver_gpio.o
-+bcma-$(CONFIG_BCMA_FALLBACK_SPROM)	+= fallback-sprom.o
- bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
- bcma-$(CONFIG_BCMA_HOST_SOC)		+= host_soc.o
- obj-$(CONFIG_BCMA)			+= bcma.o
---- a/drivers/bcma/sprom.c
-+++ b/drivers/bcma/sprom.c
-@@ -51,21 +51,26 @@ static int bcma_fill_sprom_with_fallback
- {
- 	int err;
- 
--	if (!get_fallback_sprom) {
-+	if (get_fallback_sprom)
-+		err = get_fallback_sprom(bus, out);
-+
-+#ifdef CONFIG_BCMA_FALLBACK_SPROM
-+	if (!get_fallback_sprom || err)
-+		err = bcma_get_fallback_sprom(bus, out);
-+#else
-+	if (!get_fallback_sprom)
- 		err = -ENOENT;
--		goto fail;
--	}
-+#endif /* CONFIG_BCMA_FALLBACK_SPROM */
- 
--	err = get_fallback_sprom(bus, out);
--	if (err)
--		goto fail;
-+	if (err) {
-+		bcma_warn(bus, "Using fallback SPROM failed (err %d)\n", err);
-+		return err;
-+	}
- 
- 	bcma_debug(bus, "Using SPROM revision %d provided by platform.\n",
- 		   bus->sprom.revision);
-+
- 	return 0;
--fail:
--	bcma_warn(bus, "Using fallback SPROM failed (err %d)\n", err);
--	return err;
- }
- 
- /**************************************************
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -25,6 +25,11 @@ if SSB
- config SSB_SPROM
- 	bool
- 
-+config SSB_FALLBACK_SPROM
-+	bool
-+	depends on SSB_PCIHOST
-+	default y
-+
- # Support for Block-I/O. SELECT this from the driver that needs it.
- config SSB_BLOCKIO
- 	bool
---- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -2,6 +2,7 @@
- # core
- ssb-y					+= main.o scan.o
- ssb-$(CONFIG_SSB_EMBEDDED)		+= embedded.o
-+ssb-$(CONFIG_SSB_FALLBACK_SPROM)	+= fallback-sprom.o
- ssb-$(CONFIG_SSB_SPROM)			+= sprom.o
- 
- # host support
---- a/drivers/ssb/sprom.c
-+++ b/drivers/ssb/sprom.c
-@@ -180,10 +180,20 @@ int ssb_arch_register_fallback_sprom(int
- 
- int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-+	int err;
-+
-+	if (get_fallback_sprom)
-+		err = get_fallback_sprom(bus, out);
-+
-+#ifdef CONFIG_SSB_FALLBACK_SPROM
-+	if (!get_fallback_sprom || err)
-+		err = ssb_get_fallback_sprom(bus, out);
-+#else
- 	if (!get_fallback_sprom)
- 		return -ENOENT;
-+#endif /* CONFIG_SSB_FALLBACK_SPROM */
- 
--	return get_fallback_sprom(bus, out);
-+	return err;
- }
- 
- /* https://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -143,6 +143,10 @@ extern int ssb_bus_scan(struct ssb_bus *
- extern void ssb_iounmap(struct ssb_bus *ssb);
- 
- 
-+/* fallback-sprom.c */
-+int __init ssb_fbs_register(void);
-+int ssb_get_fallback_sprom(struct ssb_bus *dev, struct ssb_sprom *out);
-+
- /* sprom.c */
- extern
- ssize_t ssb_attr_sprom_show(struct ssb_bus *bus, char *buf,
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -668,6 +668,14 @@ static int __init bcma_modinit(void)
- {
- 	int err;
- 
-+#ifdef CONFIG_BCMA_FALLBACK_SPROM
-+	err = bcma_fbs_register();
-+	if (err) {
-+		pr_err("Fallback SPROM initialization failed\n");
-+		err = 0;
-+	}
-+#endif /* CONFIG_BCMA_FALLBACK_SPROM */
-+
- 	err = bcma_init_bus_register();
- 	if (err)
- 		return err;
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -1282,6 +1282,14 @@ static int __init ssb_modinit(void)
- {
- 	int err;
- 
-+#ifdef CONFIG_SSB_FALLBACK_SPROM
-+	err = ssb_fbs_register();
-+	if (err) {
-+		pr_err("Fallback SPROM initialization failed\n");
-+		err = 0;
-+	}
-+#endif /* CONFIG_SSB_FALLBACK_SPROM */
-+
- 	/* See the comment at the ssb_is_early_boot definition */
- 	ssb_is_early_boot = 0;
- 	err = bus_register(&ssb_bustype);
diff --git a/target/linux/generic/hack-5.10/901-debloat_sock_diag.patch b/target/linux/generic/hack-5.10/901-debloat_sock_diag.patch
deleted file mode 100644
index 1ff1bcabb4ac..000000000000
--- a/target/linux/generic/hack-5.10/901-debloat_sock_diag.patch
+++ /dev/null
@@ -1,162 +0,0 @@
-From 3b6115d6b57a263bdc8c9b1df273bd4a7955eead Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:16:31 +0200
-Subject: debloat: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/Kconfig         | 3 +++
- net/core/Makefile   | 3 ++-
- net/core/sock.c     | 2 ++
- net/ipv4/Kconfig    | 1 +
- net/netlink/Kconfig | 1 +
- net/packet/Kconfig  | 1 +
- net/unix/Kconfig    | 1 +
- 7 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -104,6 +104,9 @@ source "net/mptcp/Kconfig"
- 
- endif # if INET
- 
-+config SOCK_DIAG
-+	bool
-+
- config NETWORK_SECMARK
- 	bool "Security Marking"
- 	help
---- a/net/core/Makefile
-+++ b/net/core/Makefile
-@@ -10,9 +10,10 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_core.
- 
- obj-y		     += dev.o dev_addr_lists.o dst.o netevent.o \
- 			neighbour.o rtnetlink.o utils.o link_watch.o filter.o \
--			sock_diag.o dev_ioctl.o tso.o sock_reuseport.o \
-+			dev_ioctl.o tso.o sock_reuseport.o \
- 			fib_notifier.o xdp.o flow_offload.o
- 
-+obj-$(CONFIG_SOCK_DIAG) += sock_diag.o
- obj-y += net-sysfs.o
- obj-$(CONFIG_PAGE_POOL) += page_pool.o
- obj-$(CONFIG_PROC_FS) += net-procfs.o
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -114,6 +114,7 @@
- #include <linux/memcontrol.h>
- #include <linux/prefetch.h>
- #include <linux/compat.h>
-+#include <linux/cookie.h>
- 
- #include <linux/uaccess.h>
- 
-@@ -141,6 +142,7 @@
- 
- static DEFINE_MUTEX(proto_list_mutex);
- static LIST_HEAD(proto_list);
-+DEFINE_COOKIE(sock_cookie);
- 
- static void sock_inuse_add(struct net *net, int val);
- 
-@@ -526,6 +528,18 @@ discard_and_relse:
- }
- EXPORT_SYMBOL(__sk_receive_skb);
- 
-+u64 __sock_gen_cookie(struct sock *sk)
-+{
-+	while (1) {
-+		u64 res = atomic64_read(&sk->sk_cookie);
-+
-+		if (res)
-+			return res;
-+		res = gen_cookie_next(&sock_cookie);
-+		atomic64_cmpxchg(&sk->sk_cookie, 0, res);
-+	}
-+}
-+
- struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie)
- {
- 	struct dst_entry *dst = __sk_dst_get(sk);
-@@ -1834,9 +1848,11 @@ static void __sk_free(struct sock *sk)
- 	if (likely(sk->sk_net_refcnt))
- 		sock_inuse_add(sock_net(sk), -1);
- 
-+#ifdef CONFIG_SOCK_DIAG
- 	if (unlikely(sk->sk_net_refcnt && sock_diag_has_destroy_listeners(sk)))
- 		sock_diag_broadcast_destroy(sk);
- 	else
-+#endif
- 		sk_destruct(sk);
- }
- 
---- a/net/core/sock_diag.c
-+++ b/net/core/sock_diag.c
-@@ -11,7 +11,6 @@
- #include <linux/tcp.h>
- #include <linux/workqueue.h>
- #include <linux/nospec.h>
--#include <linux/cookie.h>
- #include <linux/inet_diag.h>
- #include <linux/sock_diag.h>
- 
-@@ -20,20 +19,6 @@ static int (*inet_rcv_compat)(struct sk_
- static DEFINE_MUTEX(sock_diag_table_mutex);
- static struct workqueue_struct *broadcast_wq;
- 
--DEFINE_COOKIE(sock_cookie);
--
--u64 __sock_gen_cookie(struct sock *sk)
--{
--	while (1) {
--		u64 res = atomic64_read(&sk->sk_cookie);
--
--		if (res)
--			return res;
--		res = gen_cookie_next(&sock_cookie);
--		atomic64_cmpxchg(&sk->sk_cookie, 0, res);
--	}
--}
--
- int sock_diag_check_cookie(struct sock *sk, const __u32 *cookie)
- {
- 	u64 res;
---- a/net/ipv4/Kconfig
-+++ b/net/ipv4/Kconfig
-@@ -424,6 +424,7 @@ config INET_TUNNEL
- 
- config INET_DIAG
- 	tristate "INET: socket monitoring interface"
-+	select SOCK_DIAG
- 	default y
- 	help
- 	  Support for INET (TCP, DCCP, etc) socket monitoring interface used by
---- a/net/netlink/Kconfig
-+++ b/net/netlink/Kconfig
-@@ -5,6 +5,7 @@
- 
- config NETLINK_DIAG
- 	tristate "NETLINK: socket monitoring interface"
-+	select SOCK_DIAG
- 	default n
- 	help
- 	  Support for NETLINK socket monitoring interface used by the ss tool.
---- a/net/packet/Kconfig
-+++ b/net/packet/Kconfig
-@@ -19,6 +19,7 @@ config PACKET
- config PACKET_DIAG
- 	tristate "Packet: sockets monitoring interface"
- 	depends on PACKET
-+	select SOCK_DIAG
- 	default n
- 	help
- 	  Support for PF_PACKET sockets monitoring interface used by the ss tool.
---- a/net/unix/Kconfig
-+++ b/net/unix/Kconfig
-@@ -28,6 +28,7 @@ config UNIX_SCM
- config UNIX_DIAG
- 	tristate "UNIX: socket monitoring interface"
- 	depends on UNIX
-+	select SOCK_DIAG
- 	default n
- 	help
- 	  Support for UNIX socket monitoring interface used by the ss tool.
diff --git a/target/linux/generic/hack-5.10/902-debloat_proc.patch b/target/linux/generic/hack-5.10/902-debloat_proc.patch
deleted file mode 100644
index d8c289ac1aec..000000000000
--- a/target/linux/generic/hack-5.10/902-debloat_proc.patch
+++ /dev/null
@@ -1,408 +0,0 @@
-From 9e3f1d0805b2d919904dd9a4ff0d956314cc3cba Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:20:09 +0200
-Subject: debloat: procfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- fs/locks.c               |  2 ++
- fs/proc/Kconfig          |  5 +++++
- fs/proc/consoles.c       |  3 +++
- fs/proc/proc_tty.c       | 11 ++++++++++-
- include/net/snmp.h       | 18 +++++++++++++++++-
- ipc/msg.c                |  3 +++
- ipc/sem.c                |  2 ++
- ipc/shm.c                |  2 ++
- ipc/util.c               |  3 +++
- kernel/exec_domain.c     |  2 ++
- kernel/irq/proc.c        |  9 +++++++++
- kernel/time/timer_list.c |  2 ++
- mm/vmalloc.c             |  2 ++
- mm/vmstat.c              |  8 +++++---
- net/8021q/vlanproc.c     |  6 ++++++
- net/core/net-procfs.c    | 18 ++++++++++++------
- net/core/sock.c          |  2 ++
- net/ipv4/fib_trie.c      | 18 ++++++++++++------
- net/ipv4/proc.c          |  3 +++
- net/ipv4/route.c         |  3 +++
- 20 files changed, 105 insertions(+), 17 deletions(-)
-
---- a/fs/locks.c
-+++ b/fs/locks.c
-@@ -3016,6 +3016,8 @@ static const struct seq_operations locks
- 
- static int __init proc_locks_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	proc_create_seq_private("locks", 0, NULL, &locks_seq_operations,
- 			sizeof(struct locks_iterator), NULL);
- 	return 0;
---- a/fs/proc/Kconfig
-+++ b/fs/proc/Kconfig
-@@ -100,6 +100,11 @@ config PROC_CHILDREN
- 	  Say Y if you are running any user-space software which takes benefit from
- 	  this interface. For example, rkt is such a piece of software.
- 
-+config PROC_STRIPPED
-+	default n
-+	depends on EXPERT
-+	bool "Strip non-essential /proc functionality to reduce code size"
-+
- config PROC_PID_ARCH_STATUS
- 	def_bool n
- 	depends on PROC_FS
---- a/fs/proc/consoles.c
-+++ b/fs/proc/consoles.c
-@@ -92,6 +92,9 @@ static const struct seq_operations conso
- 
- static int __init proc_consoles_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	proc_create_seq("consoles", 0, NULL, &consoles_op);
- 	return 0;
- }
---- a/fs/proc/proc_tty.c
-+++ b/fs/proc/proc_tty.c
-@@ -133,7 +133,10 @@ static const struct seq_operations tty_d
- void proc_tty_register_driver(struct tty_driver *driver)
- {
- 	struct proc_dir_entry *ent;
--		
-+
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (!driver->driver_name || driver->proc_entry ||
- 	    !driver->ops->proc_show)
- 		return;
-@@ -150,6 +153,9 @@ void proc_tty_unregister_driver(struct t
- {
- 	struct proc_dir_entry *ent;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	ent = driver->proc_entry;
- 	if (!ent)
- 		return;
-@@ -164,6 +170,9 @@ void proc_tty_unregister_driver(struct t
-  */
- void __init proc_tty_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (!proc_mkdir("tty", NULL))
- 		return;
- 	proc_mkdir("tty/ldisc", NULL);	/* Preserved: it's userspace visible */
---- a/include/net/snmp.h
-+++ b/include/net/snmp.h
-@@ -124,6 +124,21 @@ struct linux_tls_mib {
- #define DECLARE_SNMP_STAT(type, name)	\
- 	extern __typeof__(type) __percpu *name
- 
-+#ifdef CONFIG_PROC_STRIPPED
-+#define __SNMP_STATS_DUMMY(mib)	\
-+	do { (void) mib->mibs[0]; } while(0)
-+
-+#define __SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_INC_STATS_ATOMIC_LONG(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_DEC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define __SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
-+#define __SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
-+
-+#else
-+
- #define __SNMP_INC_STATS(mib, field)	\
- 			__this_cpu_inc(mib->mibs[field])
- 
-@@ -154,8 +169,9 @@ struct linux_tls_mib {
- 		__this_cpu_add(ptr[basefield##OCTETS], addend);	\
- 	} while (0)
- 
-+#endif
- 
--#if BITS_PER_LONG==32
-+#if (BITS_PER_LONG==32) && !defined(CONFIG_PROC_STRIPPED)
- 
- #define __SNMP_ADD_STATS64(mib, field, addend) 				\
- 	do {								\
---- a/ipc/msg.c
-+++ b/ipc/msg.c
-@@ -1350,6 +1350,9 @@ void __init msg_init(void)
- {
- 	msg_init_ns(&init_ipc_ns);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	ipc_init_proc_interface("sysvipc/msg",
- 				"       key      msqid perms      cbytes       qnum lspid lrpid   uid   gid  cuid  cgid      stime      rtime      ctime\n",
- 				IPC_MSG_IDS, sysvipc_msg_proc_show);
---- a/ipc/sem.c
-+++ b/ipc/sem.c
-@@ -266,6 +266,8 @@ void sem_exit_ns(struct ipc_namespace *n
- void __init sem_init(void)
- {
- 	sem_init_ns(&init_ipc_ns);
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
- 	ipc_init_proc_interface("sysvipc/sem",
- 				"       key      semid perms      nsems   uid   gid  cuid  cgid      otime      ctime\n",
- 				IPC_SEM_IDS, sysvipc_sem_proc_show);
---- a/ipc/shm.c
-+++ b/ipc/shm.c
-@@ -154,6 +154,8 @@ pure_initcall(ipc_ns_init);
- 
- void __init shm_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
- 	ipc_init_proc_interface("sysvipc/shm",
- #if BITS_PER_LONG <= 32
- 				"       key      shmid perms       size  cpid  lpid nattch   uid   gid  cuid  cgid      atime      dtime      ctime        rss       swap\n",
---- a/ipc/util.c
-+++ b/ipc/util.c
-@@ -140,6 +140,9 @@ void __init ipc_init_proc_interface(cons
- 	struct proc_dir_entry *pde;
- 	struct ipc_proc_iface *iface;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	iface = kmalloc(sizeof(*iface), GFP_KERNEL);
- 	if (!iface)
- 		return;
---- a/kernel/exec_domain.c
-+++ b/kernel/exec_domain.c
-@@ -29,6 +29,8 @@ static int execdomains_proc_show(struct
- 
- static int __init proc_execdomains_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	proc_create_single("execdomains", 0, NULL, execdomains_proc_show);
- 	return 0;
- }
---- a/kernel/irq/proc.c
-+++ b/kernel/irq/proc.c
-@@ -341,6 +341,9 @@ void register_irq_proc(unsigned int irq,
- 	void __maybe_unused *irqp = (void *)(unsigned long) irq;
- 	char name [MAX_NAMELEN];
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip))
- 		return;
- 
-@@ -394,6 +397,9 @@ void unregister_irq_proc(unsigned int ir
- {
- 	char name [MAX_NAMELEN];
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	if (!root_irq_dir || !desc->dir)
- 		return;
- #ifdef CONFIG_SMP
-@@ -432,6 +438,9 @@ void init_irq_proc(void)
- 	unsigned int irq;
- 	struct irq_desc *desc;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	/* create /proc/irq */
- 	root_irq_dir = proc_mkdir("irq", NULL);
- 	if (!root_irq_dir)
---- a/kernel/time/timer_list.c
-+++ b/kernel/time/timer_list.c
-@@ -370,6 +370,8 @@ static int __init init_timer_list_procfs
- {
- 	struct proc_dir_entry *pe;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	pe = proc_create_seq_private("timer_list", 0400, NULL, &timer_list_sops,
- 			sizeof(struct timer_list_iter), NULL);
- 	if (!pe)
---- a/mm/vmalloc.c
-+++ b/mm/vmalloc.c
-@@ -3572,6 +3572,8 @@ static const struct seq_operations vmall
- 
- static int __init proc_vmalloc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	if (IS_ENABLED(CONFIG_NUMA))
- 		proc_create_seq_private("vmallocinfo", 0400, NULL,
- 				&vmalloc_op,
---- a/mm/vmstat.c
-+++ b/mm/vmstat.c
-@@ -2040,10 +2040,12 @@ void __init init_mm_internals(void)
- 	start_shepherd_timer();
- #endif
- #ifdef CONFIG_PROC_FS
--	proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
--	proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
-+		proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
-+		proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
-+	}
- 	proc_create_seq("vmstat", 0444, NULL, &vmstat_op);
--	proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
- #endif
- }
- 
---- a/net/8021q/vlanproc.c
-+++ b/net/8021q/vlanproc.c
-@@ -93,6 +93,9 @@ void vlan_proc_cleanup(struct net *net)
- {
- 	struct vlan_net *vn = net_generic(net, vlan_net_id);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (vn->proc_vlan_conf)
- 		remove_proc_entry(name_conf, vn->proc_vlan_dir);
- 
-@@ -112,6 +115,9 @@ int __net_init vlan_proc_init(struct net
- {
- 	struct vlan_net *vn = net_generic(net, vlan_net_id);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	vn->proc_vlan_dir = proc_net_mkdir(net, name_root, net->proc_net);
- 	if (!vn->proc_vlan_dir)
- 		goto err;
---- a/net/core/net-procfs.c
-+++ b/net/core/net-procfs.c
-@@ -320,10 +320,12 @@ static int __net_init dev_proc_net_init(
- 	if (!proc_create_net("dev", 0444, net->proc_net, &dev_seq_ops,
- 			sizeof(struct seq_net_private)))
- 		goto out;
--	if (!proc_create_seq("softnet_stat", 0444, net->proc_net,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_seq("softnet_stat", 0444, net->proc_net,
- 			 &softnet_seq_ops))
- 		goto out_dev;
--	if (!proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops,
- 			sizeof(struct seq_net_private)))
- 		goto out_softnet;
- 
-@@ -333,9 +335,11 @@ static int __net_init dev_proc_net_init(
- out:
- 	return rc;
- out_ptype:
--	remove_proc_entry("ptype", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("ptype", net->proc_net);
- out_softnet:
--	remove_proc_entry("softnet_stat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("softnet_stat", net->proc_net);
- out_dev:
- 	remove_proc_entry("dev", net->proc_net);
- 	goto out;
-@@ -345,8 +349,10 @@ static void __net_exit dev_proc_net_exit
- {
- 	wext_proc_exit(net);
- 
--	remove_proc_entry("ptype", net->proc_net);
--	remove_proc_entry("softnet_stat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		remove_proc_entry("ptype", net->proc_net);
-+		remove_proc_entry("softnet_stat", net->proc_net);
-+	}
- 	remove_proc_entry("dev", net->proc_net);
- }
- 
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -3710,6 +3710,8 @@ static __net_initdata struct pernet_oper
- 
- static int __init proto_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	return register_pernet_subsys(&proto_net_ops);
- }
- 
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2988,11 +2988,13 @@ static const struct seq_operations fib_r
- 
- int __net_init fib_proc_init(struct net *net)
- {
--	if (!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
- 			sizeof(struct fib_trie_iter)))
- 		goto out1;
- 
--	if (!proc_create_net_single("fib_triestat", 0444, net->proc_net,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_net_single("fib_triestat", 0444, net->proc_net,
- 			fib_triestat_seq_show, NULL))
- 		goto out2;
- 
-@@ -3003,17 +3005,21 @@ int __net_init fib_proc_init(struct net
- 	return 0;
- 
- out3:
--	remove_proc_entry("fib_triestat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("fib_triestat", net->proc_net);
- out2:
--	remove_proc_entry("fib_trie", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("fib_trie", net->proc_net);
- out1:
- 	return -ENOMEM;
- }
- 
- void __net_exit fib_proc_exit(struct net *net)
- {
--	remove_proc_entry("fib_trie", net->proc_net);
--	remove_proc_entry("fib_triestat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		remove_proc_entry("fib_trie", net->proc_net);
-+		remove_proc_entry("fib_triestat", net->proc_net);
-+	}
- 	remove_proc_entry("route", net->proc_net);
- }
- 
---- a/net/ipv4/proc.c
-+++ b/net/ipv4/proc.c
-@@ -528,5 +528,8 @@ static __net_initdata struct pernet_oper
- 
- int __init ip_misc_proc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	return register_pernet_subsys(&ip_proc_ops);
- }
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -410,6 +410,9 @@ static struct pernet_operations ip_rt_pr
- 
- static int __init ip_rt_proc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	return register_pernet_subsys(&ip_rt_proc_ops);
- }
- 
diff --git a/target/linux/generic/hack-5.10/904-debloat_dma_buf.patch b/target/linux/generic/hack-5.10/904-debloat_dma_buf.patch
deleted file mode 100644
index 7bf15c1dd8f6..000000000000
--- a/target/linux/generic/hack-5.10/904-debloat_dma_buf.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From e3692cb2fcd5ba1244512a0f43b8118f65f1c375 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:20:43 +0200
-Subject: debloat: dmabuf
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/base/Kconfig      |  2 +-
- drivers/dma-buf/Makefile  | 10 +++++++---
- drivers/dma-buf/dma-buf.c |  4 +++-
- kernel/sched/core.c       |  1 +
- 4 files changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/base/Kconfig
-+++ b/drivers/base/Kconfig
-@@ -184,7 +184,7 @@ config SOC_BUS
- source "drivers/base/regmap/Kconfig"
- 
- config DMA_SHARED_BUFFER
--	bool
-+	tristate
- 	default n
- 	select IRQ_WORK
- 	help
---- a/drivers/dma-buf/heaps/Makefile
-+++ b/drivers/dma-buf/heaps/Makefile
-@@ -1,4 +1,4 @@
- # SPDX-License-Identifier: GPL-2.0
--obj-y					+= heap-helpers.o
--obj-$(CONFIG_DMABUF_HEAPS_SYSTEM)	+= system_heap.o
--obj-$(CONFIG_DMABUF_HEAPS_CMA)		+= cma_heap.o
-+dma-buf-objs-y					+= heap-helpers.o
-+dma-buf-objs-$(CONFIG_DMABUF_HEAPS_SYSTEM)	+= system_heap.o
-+dma-buf-objs-$(CONFIG_DMABUF_HEAPS_CMA)		+= cma_heap.o
---- a/drivers/dma-buf/Makefile
-+++ b/drivers/dma-buf/Makefile
-@@ -1,15 +1,19 @@
- # SPDX-License-Identifier: GPL-2.0-only
--obj-y := dma-buf.o dma-fence.o dma-fence-array.o dma-fence-chain.o \
-+obj-$(CONFIG_DMA_SHARED_BUFFER) := dma-shared-buffer.o
-+
-+dma-buf-objs-y := dma-buf.o dma-fence.o dma-fence-array.o dma-fence-chain.o \
- 	 dma-resv.o seqno-fence.o
--obj-$(CONFIG_DMABUF_HEAPS)	+= dma-heap.o
--obj-$(CONFIG_DMABUF_HEAPS)	+= heaps/
--obj-$(CONFIG_SYNC_FILE)		+= sync_file.o
--obj-$(CONFIG_SW_SYNC)		+= sw_sync.o sync_debug.o
--obj-$(CONFIG_UDMABUF)		+= udmabuf.o
-+dma-buf-objs-$(CONFIG_DMABUF_HEAPS)	+= dma-heap.o
-+obj-$(CONFIG_DMABUF_HEAPS)		+= heaps/
-+dma-buf-objs-$(CONFIG_SYNC_FILE)	+= sync_file.o
-+dma-buf-objs-$(CONFIG_SW_SYNC)		+= sw_sync.o sync_debug.o
-+dma-buf-objs-$(CONFIG_UDMABUF)		+= udmabuf.o
- 
- dmabuf_selftests-y := \
- 	selftest.o \
- 	st-dma-fence.o \
- 	st-dma-fence-chain.o
- 
--obj-$(CONFIG_DMABUF_SELFTESTS)	+= dmabuf_selftests.o
-+dma-buf-objs-$(CONFIG_DMABUF_SELFTESTS)	+= dmabuf_selftests.o
-+
-+dma-shared-buffer-objs :=  $(dma-buf-objs-y)
---- a/drivers/dma-buf/dma-buf.c
-+++ b/drivers/dma-buf/dma-buf.c
-@@ -1419,4 +1419,5 @@ static void __exit dma_buf_deinit(void)
- 	dma_buf_uninit_debugfs();
- 	kern_unmount(dma_buf_mnt);
- }
--__exitcall(dma_buf_deinit);
-+module_exit(dma_buf_deinit);
-+MODULE_LICENSE("GPL");
---- a/kernel/sched/core.c
-+++ b/kernel/sched/core.c
-@@ -3074,6 +3074,7 @@ int wake_up_state(struct task_struct *p,
- {
- 	return try_to_wake_up(p, state, 0);
- }
-+EXPORT_SYMBOL_GPL(wake_up_state);
- 
- /*
-  * Perform scheduler related setup for a newly forked process p.
---- a/fs/d_path.c
-+++ b/fs/d_path.c
-@@ -311,6 +311,7 @@ char *dynamic_dname(struct dentry *dentr
- 	buffer += buflen - sz;
- 	return memcpy(buffer, temp, sz);
- }
-+EXPORT_SYMBOL_GPL(dynamic_dname);
- 
- char *simple_dname(struct dentry *dentry, char *buffer, int buflen)
- {
diff --git a/target/linux/generic/hack-5.10/910-kobject_uevent.patch b/target/linux/generic/hack-5.10/910-kobject_uevent.patch
deleted file mode 100644
index c4c41ca400ae..000000000000
--- a/target/linux/generic/hack-5.10/910-kobject_uevent.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 16 Jul 2017 16:56:10 +0200
-Subject: lib: add uevent_next_seqnum()
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/kobject.h |  5 +++++
- lib/kobject_uevent.c    | 37 +++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -179,6 +179,18 @@ out:
- 	return r;
- }
- 
-+u64 uevent_next_seqnum(void)
-+{
-+	u64 seq;
-+
-+	mutex_lock(&uevent_sock_mutex);
-+	seq = ++uevent_seqnum;
-+	mutex_unlock(&uevent_sock_mutex);
-+
-+	return seq;
-+}
-+EXPORT_SYMBOL_GPL(uevent_next_seqnum);
-+
- /**
-  * kobject_synth_uevent - send synthetic uevent with arguments
-  *
diff --git a/target/linux/generic/hack-5.10/911-kobject_add_broadcast_uevent.patch b/target/linux/generic/hack-5.10/911-kobject_add_broadcast_uevent.patch
deleted file mode 100644
index a487d5519386..000000000000
--- a/target/linux/generic/hack-5.10/911-kobject_add_broadcast_uevent.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 16 Jul 2017 16:56:10 +0200
-Subject: lib: add uevent_next_seqnum()
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/kobject.h |  5 +++++
- lib/kobject_uevent.c    | 37 +++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/include/linux/kobject.h
-+++ b/include/linux/kobject.h
-@@ -32,6 +32,8 @@
- #define UEVENT_NUM_ENVP			64	/* number of env pointers */
- #define UEVENT_BUFFER_SIZE		2048	/* buffer for the variables */
- 
-+struct sk_buff;
-+
- #ifdef CONFIG_UEVENT_HELPER
- /* path to the userspace helper executed on an event */
- extern char uevent_helper[];
-@@ -244,4 +246,7 @@ int kobject_synth_uevent(struct kobject
- __printf(2, 3)
- int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...);
- 
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation);
-+
- #endif /* _KOBJECT_H_ */
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -691,6 +691,43 @@ int add_uevent_var(struct kobj_uevent_en
- EXPORT_SYMBOL_GPL(add_uevent_var);
- 
- #if defined(CONFIG_NET)
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation)
-+{
-+	struct uevent_sock *ue_sk;
-+	int err = 0;
-+
-+	/* send netlink message */
-+	mutex_lock(&uevent_sock_mutex);
-+	list_for_each_entry(ue_sk, &uevent_sock_list, list) {
-+		struct sock *uevent_sock = ue_sk->sk;
-+		struct sk_buff *skb2;
-+
-+		skb2 = skb_clone(skb, allocation);
-+		if (!skb2)
-+			break;
-+
-+		err = netlink_broadcast(uevent_sock, skb2, pid, group,
-+					allocation);
-+		if (err)
-+			break;
-+	}
-+	mutex_unlock(&uevent_sock_mutex);
-+
-+	kfree_skb(skb);
-+	return err;
-+}
-+#else
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation)
-+{
-+	kfree_skb(skb);
-+	return 0;
-+}
-+#endif
-+EXPORT_SYMBOL_GPL(broadcast_uevent);
-+
-+#if defined(CONFIG_NET)
- static int uevent_net_broadcast(struct sock *usk, struct sk_buff *skb,
- 				struct netlink_ext_ack *extack)
- {
diff --git a/target/linux/generic/hack-5.10/920-device_tree_cmdline.patch b/target/linux/generic/hack-5.10/920-device_tree_cmdline.patch
deleted file mode 100644
index dbba45b41c3b..000000000000
--- a/target/linux/generic/hack-5.10/920-device_tree_cmdline.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From a9968d9cb8cb10030491fa05e24b00bd42f6d3a9 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@openwrt.org>
-Date: Thu, 30 May 2013 16:00:42 +0000
-Subject: fdt: enable retrieving kernel args from bootloader
-
-This patch is a device tree enhancement that IMHO is worthy of mainline.
-It allows the bootloader's commandline to be preserved even when the
-device tree specifies one.
-
-Submitted-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-
-SVN-Revision: 36780
----
- drivers/of/fdt.c                                     | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -1054,6 +1054,9 @@ int __init early_init_dt_scan_chosen(uns
- 	p = of_get_flat_dt_prop(node, "bootargs", &l);
- 	if (p != NULL && l > 0)
- 		strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
-+	p = of_get_flat_dt_prop(node, "bootargs-append", &l);
-+	if (p != NULL && l > 0)
-+		strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));
- 
- 	/*
- 	 * CONFIG_CMDLINE is meant to be a default in case nothing else
diff --git a/target/linux/generic/pending-5.10/050-dtc-checks-Drop-interrupt-provider-address-cells-check.patch b/target/linux/generic/pending-5.10/050-dtc-checks-Drop-interrupt-provider-address-cells-check.patch
deleted file mode 100644
index 75f63728ec2b..000000000000
--- a/target/linux/generic/pending-5.10/050-dtc-checks-Drop-interrupt-provider-address-cells-check.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From d8d1a9a77863a8c7031ae82a1d461aa78eb72a7b Mon Sep 17 00:00:00 2001
-From: Rob Herring <robh@kernel.org>
-Date: Mon, 11 Oct 2021 14:12:43 -0500
-Subject: [PATCH] checks: Drop interrupt provider '#address-cells' check
-
-'#address-cells' is only needed when parsing 'interrupt-map' properties, so
-remove it from the common interrupt-provider test.
-
-Cc: Andre Przywara <andre.przywara@arm.com>
-Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
-Signed-off-by: Rob Herring <robh@kernel.org>
-Message-Id: <20211011191245.1009682-3-robh@kernel.org>
-Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
----
---- a/scripts/dtc/checks.c
-+++ b/scripts/dtc/checks.c
-@@ -1569,11 +1569,6 @@ static void check_interrupt_provider(str
- 	if (!prop)
- 		FAIL(c, dti, node,
- 		     "Missing #interrupt-cells in interrupt provider");
--
--	prop = get_property(node, "#address-cells");
--	if (!prop)
--		FAIL(c, dti, node,
--		     "Missing #address-cells in interrupt provider");
- }
- WARNING(interrupt_provider, check_interrupt_provider, NULL);
- 
diff --git a/target/linux/generic/pending-5.10/100-compiler.h-only-include-asm-rwonce.h-for-kernel-code.patch b/target/linux/generic/pending-5.10/100-compiler.h-only-include-asm-rwonce.h-for-kernel-code.patch
deleted file mode 100644
index 282c8196e5fd..000000000000
--- a/target/linux/generic/pending-5.10/100-compiler.h-only-include-asm-rwonce.h-for-kernel-code.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Oct 2020 22:00:03 +0200
-Subject: [PATCH] compiler.h: only include asm/rwonce.h for kernel code
-
-This header file is not in uapi, which makes any user space code that includes
-linux/compiler.h to fail with the error 'asm/rwonce.h: No such file or directory'
-
-Fixes: e506ea451254 ("compiler.h: Split {READ,WRITE}_ONCE definitions out into rwonce.h")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/linux/compiler.h
-+++ b/include/linux/compiler.h
-@@ -213,6 +213,8 @@ void ftrace_likely_update(struct ftrace_
- 	__v;								\
- })
- 
-+#include <asm/rwonce.h>
-+
- #endif /* __KERNEL__ */
- 
- /*
-@@ -245,6 +247,4 @@ static inline void *offset_to_ptr(const
-  */
- #define prevent_tail_call_optimization()	mb()
- 
--#include <asm/rwonce.h>
--
- #endif /* __LINUX_COMPILER_H */
diff --git a/target/linux/generic/pending-5.10/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch b/target/linux/generic/pending-5.10/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
deleted file mode 100644
index cc9f99e8b026..000000000000
--- a/target/linux/generic/pending-5.10/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 18 Apr 2018 10:50:05 +0200
-Subject: [PATCH] MIPS: only process negative stack offsets on stack traces
-
-Fixes endless back traces in cases where the compiler emits a stack
-pointer increase in a branch delay slot (probably for some form of
-function return).
-
-[    3.475442] BUG: MAX_STACK_TRACE_ENTRIES too low!
-[    3.480070] turning off the locking correctness validator.
-[    3.485521] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.34 #0
-[    3.491475] Stack : 00000000 00000000 00000000 00000000 80e0fce2 00000034 00000000 00000000
-[    3.499764]         87c3838c 80696377 8061047c 00000000 00000001 00000001 87c2d850 6534689f
-[    3.508059]         00000000 00000000 80e10000 00000000 00000000 000000cf 0000000f 00000000
-[    3.516353]         00000000 806a0000 00076891 00000000 00000000 00000000 ffffffff 00000000
-[    3.524648]         806c0000 00000004 80e10000 806a0000 00000003 80690000 00000000 80700000
-[    3.532942]         ...
-[    3.535362] Call Trace:
-[    3.537818] [<80010a48>] show_stack+0x58/0x100
-[    3.542207] [<804c2f78>] dump_stack+0xe8/0x170
-[    3.546613] [<80079f90>] save_trace+0xf0/0x110
-[    3.551010] [<8007b1ec>] mark_lock+0x33c/0x78c
-[    3.555413] [<8007bf48>] __lock_acquire+0x2ac/0x1a08
-[    3.560337] [<8007de60>] lock_acquire+0x64/0x8c
-[    3.564846] [<804e1570>] _raw_spin_lock_irqsave+0x54/0x78
-[    3.570186] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.574770] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.579257] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.583839] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.588329] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.592911] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.597401] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.601983] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.606473] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.611055] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.615545] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.620125] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.624619] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.629197] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.633691] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.638269] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.642763] [<801b618c>] kernfs_notify+0x94/0xac
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/kernel/process.c
-+++ b/arch/mips/kernel/process.c
-@@ -380,6 +380,8 @@ static inline int is_sp_move_ins(union m
- 
- 	if (ip->i_format.opcode == addiu_op ||
- 	    ip->i_format.opcode == daddiu_op) {
-+		if (ip->i_format.simmediate > 0)
-+			return 0;
- 		*frame_size = -ip->i_format.simmediate;
- 		return 1;
- 	}
diff --git a/target/linux/generic/pending-5.10/110-v6.3-0001-spidev-Add-Silicon-Labs-EM3581-device-compatible.patch b/target/linux/generic/pending-5.10/110-v6.3-0001-spidev-Add-Silicon-Labs-EM3581-device-compatible.patch
deleted file mode 100644
index 6090bbb329d3..000000000000
--- a/target/linux/generic/pending-5.10/110-v6.3-0001-spidev-Add-Silicon-Labs-EM3581-device-compatible.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From f7982c726e02001afc19052fe48f642dfcbc00b2 Mon Sep 17 00:00:00 2001
-From: Vincent Tremblay <vincent@vtremblay.dev>
-Date: Mon, 26 Dec 2022 21:10:37 -0500
-Subject: [PATCH 1/2] spidev: Add Silicon Labs EM3581 device compatible
-
-Add compatible string for Silicon Labs EM3581 device.
-
-Note: This patch is adapted from a patch submitted to the for-next branch (v6.3).
-
-Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
-
---- a/drivers/spi/spidev.c
-+++ b/drivers/spi/spidev.c
-@@ -691,6 +691,7 @@ static const struct of_device_id spidev_
- 	{ .compatible = "lwn,bk4" },
- 	{ .compatible = "dh,dhcom-board" },
- 	{ .compatible = "menlo,m53cpld" },
-+	{ .compatible = "silabs,em3581" },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, spidev_dt_ids);
diff --git a/target/linux/generic/pending-5.10/110-v6.3-0002-spidev-Add-Silicon-Labs-SI3210-device-compatible.patch b/target/linux/generic/pending-5.10/110-v6.3-0002-spidev-Add-Silicon-Labs-SI3210-device-compatible.patch
deleted file mode 100644
index 19b7a0a4e501..000000000000
--- a/target/linux/generic/pending-5.10/110-v6.3-0002-spidev-Add-Silicon-Labs-SI3210-device-compatible.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 536581825219e97fa2ae0c4de35605d2f6311416 Mon Sep 17 00:00:00 2001
-From: Vincent Tremblay <vincent@vtremblay.dev>
-Date: Tue, 27 Dec 2022 09:00:58 -0500
-Subject: [PATCH 2/2] spidev: Add Silicon Labs SI3210 device compatible
-
-Add compatible string for Silicon Labs SI3210 device.
-
-Note: This patch is adapted from a patch submitted to the for-next branch (v6.3).
-
-Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
----
-
---- a/drivers/spi/spidev.c
-+++ b/drivers/spi/spidev.c
-@@ -692,6 +692,7 @@ static const struct of_device_id spidev_
- 	{ .compatible = "dh,dhcom-board" },
- 	{ .compatible = "menlo,m53cpld" },
- 	{ .compatible = "silabs,em3581" },
-+	{ .compatible = "silabs,si3210" },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, spidev_dt_ids);
diff --git a/target/linux/generic/pending-5.10/111-watchdog-max63xx_wdt-Add-support-for-specifying-WDI-.patch b/target/linux/generic/pending-5.10/111-watchdog-max63xx_wdt-Add-support-for-specifying-WDI-.patch
deleted file mode 100644
index d2e134a1329e..000000000000
--- a/target/linux/generic/pending-5.10/111-watchdog-max63xx_wdt-Add-support-for-specifying-WDI-.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From bd1b9f66d5134e518419f4c4dacf1884c1616983 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 28 Apr 2022 11:13:23 +0200
-Subject: [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic
- via GPIO
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On some boards is WDI logic of max6370 chip connected via GPIO.
-So extend max63xx_wdt driver to allow specifying WDI logic via GPIO.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
----
- drivers/watchdog/max63xx_wdt.c | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/drivers/watchdog/max63xx_wdt.c
-+++ b/drivers/watchdog/max63xx_wdt.c
-@@ -26,6 +26,7 @@
- #include <linux/spinlock.h>
- #include <linux/io.h>
- #include <linux/slab.h>
-+#include <linux/gpio/consumer.h>
- 
- #define DEFAULT_HEARTBEAT 60
- #define MAX_HEARTBEAT     60
-@@ -52,6 +53,9 @@ struct max63xx_wdt {
- 	void __iomem *base;
- 	spinlock_t lock;
- 
-+	/* GPIOs */
-+	struct gpio_desc *gpio_wdi;
-+
- 	/* WDI and WSET bits write access routines */
- 	void (*ping)(struct max63xx_wdt *wdt);
- 	void (*set)(struct max63xx_wdt *wdt, u8 set);
-@@ -157,6 +161,17 @@ static const struct watchdog_info max63x
- 	.identity = "max63xx Watchdog",
- };
- 
-+static void max63xx_gpio_ping(struct max63xx_wdt *wdt)
-+{
-+	spin_lock(&wdt->lock);
-+
-+	gpiod_set_value(wdt->gpio_wdi, 1);
-+	udelay(1);
-+	gpiod_set_value(wdt->gpio_wdi, 0);
-+
-+	spin_unlock(&wdt->lock);
-+}
-+
- static void max63xx_mmap_ping(struct max63xx_wdt *wdt)
- {
- 	u8 val;
-@@ -221,10 +236,19 @@ static int max63xx_wdt_probe(struct plat
- 		return -EINVAL;
- 	}
- 
-+	wdt->gpio_wdi = devm_gpiod_get(dev, NULL, GPIOD_FLAGS_BIT_DIR_OUT);
-+	if (IS_ERR(wdt->gpio_wdi) && PTR_ERR(wdt->gpio_wdi) != -ENOENT)
-+		return dev_err_probe(dev, PTR_ERR(wdt->gpio_wdi),
-+				     "unable to request gpio: %ld\n",
-+				     PTR_ERR(wdt->gpio_wdi));
-+
- 	err = max63xx_mmap_init(pdev, wdt);
- 	if (err)
- 		return err;
- 
-+	if (!IS_ERR(wdt->gpio_wdi))
-+		wdt->ping = max63xx_gpio_ping;
-+
- 	platform_set_drvdata(pdev, &wdt->wdd);
- 	watchdog_set_drvdata(&wdt->wdd, wdt);
- 
diff --git a/target/linux/generic/pending-5.10/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-5.10/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
deleted file mode 100644
index 1adfd22e87b7..000000000000
--- a/target/linux/generic/pending-5.10/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From: Tobias Wolf <dev-NTEO@vplace.de>
-Subject: mm: Fix alloc_node_mem_map with ARCH_PFN_OFFSET calculation
-
-An rt288x (ralink) based router (Belkin F5D8235 v1) does not boot with any
-kernel beyond version 4.3 resulting in:
-
-BUG: Bad page state in process swapper  pfn:086ac
-
-bisect resulted in:
-
-a1c34a3bf00af2cede839879502e12dc68491ad5 is the first bad commit
-commit a1c34a3bf00af2cede839879502e12dc68491ad5
-Author: Laura Abbott <laura@labbott.name>
-Date:   Thu Nov 5 18:48:46 2015 -0800
-
-    mm: Don't offset memmap for flatmem
-
-    Srinivas Kandagatla reported bad page messages when trying to remove the
-    bottom 2MB on an ARM based IFC6410 board
-
-      BUG: Bad page state in process swapper  pfn:fffa8
-      page:ef7fb500 count:0 mapcount:0 mapping:  (null) index:0x0
-      flags: 0x96640253(locked|error|dirty|active|arch_1|reclaim|mlocked)
-      page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
-      bad because of flags:
-      flags: 0x200041(locked|active|mlocked)
-      Modules linked in:
-      CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00007-g412f9ba-dirty
-#816
-      Hardware name: Qualcomm (Flattened Device Tree)
-        unwind_backtrace
-        show_stack
-        dump_stack
-        bad_page
-        free_pages_prepare
-        free_hot_cold_page
-        __free_pages
-        free_highmem_page
-        mem_init
-        start_kernel
-      Disabling lock debugging due to kernel taint
-    [...]
-:040000 040000 2de013c372345fd471cd58f0553c9b38b0ef1cc4
-0a8156f848733dfa21e16c196dfb6c0a76290709 M      mm
-
-This fix for ARM does not account ARCH_PFN_OFFSET for mem_map as later used by
-page_to_pfn anymore.
-
-The following output was generated with two hacked in printk statements:
-
-printk("before %p vs. %p or %p\n", mem_map, mem_map - offset, mem_map -
-(pgdat->node_start_pfn - ARCH_PFN_OFFSET));
-		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
-			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
-printk("after %p\n", mem_map);
-
-Output:
-
-[    0.000000] before 8861b280 vs. 8861b280 or 8851b280
-[    0.000000] after 8851b280
-
-As seen in the first line mem_map with subtraction of offset does not equal the
-mem_map after subtraction of ARCH_PFN_OFFSET.
-
-After adding the offset of ARCH_PFN_OFFSET as well to mem_map as the
-previously calculated offset is zero for the named platform it is able to boot
-4.4 and 4.9-rc7 again.
-
-Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
----
-
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -7107,7 +7107,7 @@ static void __ref alloc_node_mem_map(str
- 	if (pgdat == NODE_DATA(0)) {
- 		mem_map = NODE_DATA(0)->node_mem_map;
- 		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
--			mem_map -= offset;
-+			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
- 	}
- #endif
- }
diff --git a/target/linux/generic/pending-5.10/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch b/target/linux/generic/pending-5.10/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
deleted file mode 100644
index e48da41faedb..000000000000
--- a/target/linux/generic/pending-5.10/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: use .rename2 and add RENAME_WHITEOUT support
-
-It is required for renames on overlayfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -609,7 +609,8 @@ static int jffs2_rmdir (struct inode *di
- 	return ret;
- }
- 
--static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, umode_t mode, dev_t rdev)
-+static int __jffs2_mknod (struct inode *dir_i, struct dentry *dentry,
-+			  umode_t mode, dev_t rdev, bool whiteout)
- {
- 	struct jffs2_inode_info *f, *dir_f;
- 	struct jffs2_sb_info *c;
-@@ -748,7 +749,11 @@ static int jffs2_mknod (struct inode *di
- 	mutex_unlock(&dir_f->sem);
- 	jffs2_complete_reservation(c);
- 
--	d_instantiate_new(dentry, inode);
-+	if (!whiteout)
-+		d_instantiate_new(dentry, inode);
-+	else
-+		unlock_new_inode(inode);
-+
- 	return 0;
- 
-  fail:
-@@ -756,6 +761,17 @@ static int jffs2_mknod (struct inode *di
- 	return ret;
- }
- 
-+static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, umode_t mode, dev_t rdev)
-+{
-+	return __jffs2_mknod(dir_i, dentry, mode, rdev, false);
-+}
-+
-+static int jffs2_whiteout (struct inode *old_dir, struct dentry *old_dentry)
-+{
-+	return __jffs2_mknod(old_dir, old_dentry, S_IFCHR | WHITEOUT_MODE,
-+			     WHITEOUT_DEV, true);
-+}
-+
- static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
- 			 struct inode *new_dir_i, struct dentry *new_dentry,
- 			 unsigned int flags)
-@@ -766,7 +782,7 @@ static int jffs2_rename (struct inode *o
- 	uint8_t type;
- 	uint32_t now;
- 
--	if (flags & ~RENAME_NOREPLACE)
-+	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
- 		return -EINVAL;
- 
- 	/* The VFS will check for us and prevent trying to rename a
-@@ -832,9 +848,14 @@ static int jffs2_rename (struct inode *o
- 	if (d_is_dir(old_dentry) && !victim_f)
- 		inc_nlink(new_dir_i);
- 
--	/* Unlink the original */
--	ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
--			      old_dentry->d_name.name, old_dentry->d_name.len, NULL, now);
-+	if (flags & RENAME_WHITEOUT)
-+		/* Replace with whiteout */
-+		ret = jffs2_whiteout(old_dir_i, old_dentry);
-+	else
-+		/* Unlink the original */
-+		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-+				      old_dentry->d_name.name,
-+				      old_dentry->d_name.len, NULL, now);
- 
- 	/* We don't touch inode->i_nlink */
- 
diff --git a/target/linux/generic/pending-5.10/141-jffs2-add-RENAME_EXCHANGE-support.patch b/target/linux/generic/pending-5.10/141-jffs2-add-RENAME_EXCHANGE-support.patch
deleted file mode 100644
index dbc72339c674..000000000000
--- a/target/linux/generic/pending-5.10/141-jffs2-add-RENAME_EXCHANGE-support.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: add RENAME_EXCHANGE support
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -779,18 +779,31 @@ static int jffs2_rename (struct inode *o
- 	int ret;
- 	struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
- 	struct jffs2_inode_info *victim_f = NULL;
-+	struct inode *fst_inode = d_inode(old_dentry);
-+	struct inode *snd_inode = d_inode(new_dentry);
- 	uint8_t type;
- 	uint32_t now;
- 
--	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
-+	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT|RENAME_EXCHANGE))
- 		return -EINVAL;
- 
-+	if ((flags & RENAME_EXCHANGE) && (old_dir_i != new_dir_i)) {
-+		if (S_ISDIR(fst_inode->i_mode) && !S_ISDIR(snd_inode->i_mode)) {
-+			inc_nlink(new_dir_i);
-+			drop_nlink(old_dir_i);
-+		}
-+		else if (!S_ISDIR(fst_inode->i_mode) && S_ISDIR(snd_inode->i_mode)) {
-+			drop_nlink(new_dir_i);
-+			inc_nlink(old_dir_i);
-+		}
-+	}
-+
- 	/* The VFS will check for us and prevent trying to rename a
- 	 * file over a directory and vice versa, but if it's a directory,
- 	 * the VFS can't check whether the victim is empty. The filesystem
- 	 * needs to do that for itself.
- 	 */
--	if (d_really_is_positive(new_dentry)) {
-+	if (d_really_is_positive(new_dentry) && !(flags & RENAME_EXCHANGE)) {
- 		victim_f = JFFS2_INODE_INFO(d_inode(new_dentry));
- 		if (d_is_dir(new_dentry)) {
- 			struct jffs2_full_dirent *fd;
-@@ -825,7 +838,7 @@ static int jffs2_rename (struct inode *o
- 	if (ret)
- 		return ret;
- 
--	if (victim_f) {
-+	if (victim_f && !(flags & RENAME_EXCHANGE)) {
- 		/* There was a victim. Kill it off nicely */
- 		if (d_is_dir(new_dentry))
- 			clear_nlink(d_inode(new_dentry));
-@@ -851,6 +864,12 @@ static int jffs2_rename (struct inode *o
- 	if (flags & RENAME_WHITEOUT)
- 		/* Replace with whiteout */
- 		ret = jffs2_whiteout(old_dir_i, old_dentry);
-+	else if (flags & RENAME_EXCHANGE)
-+		/* Replace the original */
-+		ret = jffs2_do_link(c, JFFS2_INODE_INFO(old_dir_i),
-+				    d_inode(new_dentry)->i_ino, type,
-+				    old_dentry->d_name.name, old_dentry->d_name.len,
-+				    now);
- 	else
- 		/* Unlink the original */
- 		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-@@ -882,7 +901,7 @@ static int jffs2_rename (struct inode *o
- 		return ret;
- 	}
- 
--	if (d_is_dir(old_dentry))
-+	if (d_is_dir(old_dentry) && !(flags & RENAME_EXCHANGE))
- 		drop_nlink(old_dir_i);
- 
- 	new_dir_i->i_mtime = new_dir_i->i_ctime = old_dir_i->i_mtime = old_dir_i->i_ctime = ITIME(now);
diff --git a/target/linux/generic/pending-5.10/142-jffs2-add-splice-ops.patch b/target/linux/generic/pending-5.10/142-jffs2-add-splice-ops.patch
deleted file mode 100644
index de847a1f5cd1..000000000000
--- a/target/linux/generic/pending-5.10/142-jffs2-add-splice-ops.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: add splice ops
-
-Add splice_read using generic_file_splice_read.
-Add splice_write using iter_file_splice_write
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/file.c
-+++ b/fs/jffs2/file.c
-@@ -53,6 +53,8 @@ const struct file_operations jffs2_file_
- 	.open =		generic_file_open,
-  	.read_iter =	generic_file_read_iter,
-  	.write_iter =	generic_file_write_iter,
-+	.splice_read =	generic_file_splice_read,
-+	.splice_write =	iter_file_splice_write,
- 	.unlocked_ioctl=jffs2_ioctl,
- 	.mmap =		generic_file_readonly_mmap,
- 	.fsync =	jffs2_fsync,
diff --git a/target/linux/generic/pending-5.10/150-bridge_allow_receiption_on_disabled_port.patch b/target/linux/generic/pending-5.10/150-bridge_allow_receiption_on_disabled_port.patch
deleted file mode 100644
index 8ab4b361f097..000000000000
--- a/target/linux/generic/pending-5.10/150-bridge_allow_receiption_on_disabled_port.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Stephen Hemminger <stephen@networkplumber.org>
-Subject: bridge: allow receiption on disabled port
-
-When an ethernet device is enslaved to a bridge, and the bridge STP
-detects loss of carrier (or operational state down), then normally
-packet receiption is blocked.
-
-This breaks control applications like WPA which maybe expecting to
-receive packets to negotiate to bring link up. The bridge needs to
-block forwarding packets from these disabled ports, but there is no
-hard requirement to not allow local packet delivery.
-
-Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -202,6 +202,9 @@ static void __br_handle_local_finish(str
- /* note: already called with rcu_read_lock */
- static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
- {
-+	struct net_bridge_port *p = br_port_get_rcu(skb->dev);
-+
-+	if (p->state != BR_STATE_DISABLED)
- 	__br_handle_local_finish(skb);
- 
- 	/* return 1 to signal the okfn() was called so it's ok to use the skb */
-@@ -355,6 +358,17 @@ static rx_handler_result_t br_handle_fra
- 
- forward:
- 	switch (p->state) {
-+	case BR_STATE_DISABLED:
-+		if (ether_addr_equal(p->br->dev->dev_addr, dest))
-+			skb->pkt_type = PACKET_HOST;
-+
-+		if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
-+			dev_net(skb->dev), NULL, skb, skb->dev, NULL,
-+			br_handle_local_finish) == 1) {
-+			return RX_HANDLER_PASS;
-+		}
-+		break;
-+
- 	case BR_STATE_FORWARDING:
- 	case BR_STATE_LEARNING:
- 		if (ether_addr_equal(p->br->dev->dev_addr, dest))
diff --git a/target/linux/generic/pending-5.10/190-rtc-rs5c372-support_alarms_up_to_1_week.patch b/target/linux/generic/pending-5.10/190-rtc-rs5c372-support_alarms_up_to_1_week.patch
deleted file mode 100644
index 13b79b5c0987..000000000000
--- a/target/linux/generic/pending-5.10/190-rtc-rs5c372-support_alarms_up_to_1_week.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From: Daniel González Cabanelas <dgcbueu@gmail.com>
-Subject: [PATCH 1/2] rtc: rs5c372: support alarms up to 1 week
-
-The Ricoh R2221x, R2223x, RS5C372, RV5C387A chips can handle 1 week
-alarms.
-
-Read the "wday" alarm register and convert it to a date to support up 1
-week in our driver.
-
-Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
----
- drivers/rtc/rtc-rs5c372.c | 48 ++++++++++++++++++++++++++++++++++-----
- 1 file changed, 42 insertions(+), 6 deletions(-)
-
---- a/drivers/rtc/rtc-rs5c372.c
-+++ b/drivers/rtc/rtc-rs5c372.c
-@@ -393,7 +393,9 @@ static int rs5c_read_alarm(struct device
- {
- 	struct i2c_client	*client = to_i2c_client(dev);
- 	struct rs5c372		*rs5c = i2c_get_clientdata(client);
--	int			status;
-+	int			status, wday_offs;
-+	struct rtc_time 	rtc;
-+	unsigned long 		alarm_secs;
- 
- 	status = rs5c_get_regs(rs5c);
- 	if (status < 0)
-@@ -403,6 +405,30 @@ static int rs5c_read_alarm(struct device
- 	t->time.tm_sec = 0;
- 	t->time.tm_min = bcd2bin(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f);
- 	t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]);
-+	t->time.tm_wday = ffs(rs5c->regs[RS5C_REG_ALARM_A_WDAY] & 0x7f) - 1;
-+
-+	/* determine the day, month and year based on alarm wday, taking as a
-+	 * reference the current time from the rtc
-+	 */
-+	status = rs5c372_rtc_read_time(dev, &rtc);
-+	if (status < 0)
-+		return status;
-+
-+	wday_offs = t->time.tm_wday - rtc.tm_wday;
-+	alarm_secs = mktime64(rtc.tm_year + 1900,
-+			      rtc.tm_mon + 1,
-+			      rtc.tm_mday + wday_offs,
-+			      t->time.tm_hour,
-+			      t->time.tm_min,
-+			      t->time.tm_sec);
-+
-+	if (wday_offs < 0 || (wday_offs == 0 &&
-+			      (t->time.tm_hour < rtc.tm_hour ||
-+			       (t->time.tm_hour == rtc.tm_hour &&
-+				t->time.tm_min <= rtc.tm_min))))
-+		alarm_secs += 7 * 86400;
-+
-+	rtc_time64_to_tm(alarm_secs, &t->time);
- 
- 	/* ... and status */
- 	t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE);
-@@ -417,12 +443,20 @@ static int rs5c_set_alarm(struct device
- 	struct rs5c372		*rs5c = i2c_get_clientdata(client);
- 	int			status, addr, i;
- 	unsigned char		buf[3];
-+	struct rtc_time 	rtc_tm;
-+	unsigned long 		rtc_secs, alarm_secs;
- 
--	/* only handle up to 24 hours in the future, like RTC_ALM_SET */
--	if (t->time.tm_mday != -1
--			|| t->time.tm_mon != -1
--			|| t->time.tm_year != -1)
-+	/* chip only can handle alarms up to one week in the future*/
-+	status = rs5c372_rtc_read_time(dev, &rtc_tm);
-+	if (status)
-+		return status;
-+	rtc_secs = rtc_tm_to_time64(&rtc_tm);
-+	alarm_secs = rtc_tm_to_time64(&t->time);
-+	if (alarm_secs >= rtc_secs + 7 * 86400) {
-+		dev_err(dev, "%s: alarm maximum is one week in the future (%d)\n",
-+			__func__, status);
- 		return -EINVAL;
-+	}
- 
- 	/* REVISIT: round up tm_sec */
- 
-@@ -443,7 +477,9 @@ static int rs5c_set_alarm(struct device
- 	/* set alarm */
- 	buf[0] = bin2bcd(t->time.tm_min);
- 	buf[1] = rs5c_hr2reg(rs5c, t->time.tm_hour);
--	buf[2] = 0x7f;	/* any/all days */
-+	/* each bit is the day of the week, 0x7f means all days */
-+	buf[2] = (t->time.tm_wday >= 0 && t->time.tm_wday < 7) ?
-+		  BIT(t->time.tm_wday) : 0x7f;
- 
- 	for (i = 0; i < sizeof(buf); i++) {
- 		addr = RS5C_ADDR(RS5C_REG_ALARM_A_MIN + i);
diff --git a/target/linux/generic/pending-5.10/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch b/target/linux/generic/pending-5.10/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch
deleted file mode 100644
index 7e9d0e66c051..000000000000
--- a/target/linux/generic/pending-5.10/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From: Daniel González Cabanelas <dgcbueu@gmail.com>
-Subject: [PATCH 2/2] rtc: rs5c372: let the alarm to be used as wakeup source
-
-Currently there is no use for the interrupts on the rs5c372 RTC and the
-wakealarm isn't enabled. There are some devices like NASes which use this
-RTC to wake up from the power off state when the INTR pin is activated by
-the alarm clock.
-
-Enable the alarm and let to be used as a wakeup source.
-
-Tested on a Buffalo LS421DE NAS.
-
-Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
----
- drivers/rtc/rtc-rs5c372.c | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/drivers/rtc/rtc-rs5c372.c
-+++ b/drivers/rtc/rtc-rs5c372.c
-@@ -654,6 +654,7 @@ static int rs5c372_probe(struct i2c_clie
- 	int err = 0;
- 	int smbus_mode = 0;
- 	struct rs5c372 *rs5c372;
-+	bool rs5c372_can_wakeup_device = false;
- 
- 	dev_dbg(&client->dev, "%s\n", __func__);
- 
-@@ -689,6 +690,12 @@ static int rs5c372_probe(struct i2c_clie
- 	else
- 		rs5c372->type = id->driver_data;
- 
-+#ifdef CONFIG_OF
-+	if(of_property_read_bool(client->dev.of_node,
-+					      "wakeup-source"))
-+		rs5c372_can_wakeup_device = true;
-+#endif
-+
- 	/* we read registers 0x0f then 0x00-0x0f; skip the first one */
- 	rs5c372->regs = &rs5c372->buf[1];
- 	rs5c372->smbus = smbus_mode;
-@@ -722,6 +729,8 @@ static int rs5c372_probe(struct i2c_clie
- 		goto exit;
- 	}
- 
-+	rs5c372->has_irq = 1;
-+
- 	/* if the oscillator lost power and no other software (like
- 	 * the bootloader) set it up, do it here.
- 	 *
-@@ -748,6 +757,10 @@ static int rs5c372_probe(struct i2c_clie
- 			);
- 
- 	/* REVISIT use client->irq to register alarm irq ... */
-+	if (rs5c372_can_wakeup_device) {
-+		device_init_wakeup(&client->dev, true);
-+	}
-+
- 	rs5c372->rtc = devm_rtc_device_register(&client->dev,
- 					rs5c372_driver.driver.name,
- 					&rs5c372_rtc_ops, THIS_MODULE);
-@@ -761,6 +774,9 @@ static int rs5c372_probe(struct i2c_clie
- 	if (err)
- 		goto exit;
- 
-+	/* the rs5c372 alarm only supports a minute accuracy */
-+	rs5c372->rtc->uie_unsupported = 1;
-+
- 	return 0;
- 
- exit:
diff --git a/target/linux/generic/pending-5.10/203-kallsyms_uncompressed.patch b/target/linux/generic/pending-5.10/203-kallsyms_uncompressed.patch
deleted file mode 100644
index 190ce0720d9d..000000000000
--- a/target/linux/generic/pending-5.10/203-kallsyms_uncompressed.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx
-
-[john@phrozen.org: added to my upstream queue 30.12.2016]
-lede-commit: e0e3509b5ce2ccf93d4d67ea907613f5f7ec2eed
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- init/Kconfig            | 11 +++++++++++
- kernel/kallsyms.c       |  8 ++++++++
- scripts/kallsyms.c      | 12 ++++++++++++
- scripts/link-vmlinux.sh |  4 ++++
- 4 files changed, 35 insertions(+)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1401,6 +1401,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
- 	  the unaligned access emulation.
- 	  see arch/parisc/kernel/unaligned.c for reference
- 
-+config KALLSYMS_UNCOMPRESSED
-+	bool "Keep kallsyms uncompressed"
-+	depends on KALLSYMS
-+	help
-+		Normally kallsyms contains compressed symbols (using a token table),
-+		reducing the uncompressed kernel image size. Keeping the symbol table
-+		uncompressed significantly improves the size of this part in compressed
-+		kernel images.
-+
-+		Say N unless you need compressed kernel images to be small.
-+
- config HAVE_PCSPKR_PLATFORM
- 	bool
- 
---- a/kernel/kallsyms.c
-+++ b/kernel/kallsyms.c
-@@ -77,6 +77,11 @@ static unsigned int kallsyms_expand_symb
- 	 * For every byte on the compressed symbol data, copy the table
- 	 * entry for that byte.
- 	 */
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+	memcpy(result, data + 1, len - 1);
-+	result += len - 1;
-+	len = 0;
-+#endif
- 	while (len) {
- 		tptr = &kallsyms_token_table[kallsyms_token_index[*data]];
- 		data++;
-@@ -109,6 +114,9 @@ tail:
-  */
- static char kallsyms_get_symbol_type(unsigned int off)
- {
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+	return kallsyms_names[off + 1];
-+#endif
- 	/*
- 	 * Get just the first code, look it up in the token table,
- 	 * and return the first char from this token.
---- a/scripts/kallsyms.c
-+++ b/scripts/kallsyms.c
-@@ -58,6 +58,7 @@ static struct addr_range percpu_range =
- static struct sym_entry **table;
- static unsigned int table_size, table_cnt;
- static int all_symbols;
-+static int uncompressed;
- static int absolute_percpu;
- static int base_relative;
- 
-@@ -486,6 +487,9 @@ static void write_src(void)
- 
- 	free(markers);
- 
-+	if (uncompressed)
-+		return;
-+
- 	output_label("kallsyms_token_table");
- 	off = 0;
- 	for (i = 0; i < 256; i++) {
-@@ -537,6 +541,9 @@ static unsigned char *find_token(unsigne
- {
- 	int i;
- 
-+	if (uncompressed)
-+		return NULL;
-+
- 	for (i = 0; i < len - 1; i++) {
- 		if (str[i] == token[0] && str[i+1] == token[1])
- 			return &str[i];
-@@ -609,6 +616,9 @@ static void optimize_result(void)
- {
- 	int i, best;
- 
-+	if (uncompressed)
-+		return;
-+
- 	/* using the '\0' symbol last allows compress_symbols to use standard
- 	 * fast string functions */
- 	for (i = 255; i >= 0; i--) {
-@@ -773,6 +783,8 @@ int main(int argc, char **argv)
- 				absolute_percpu = 1;
- 			else if (strcmp(argv[i], "--base-relative") == 0)
- 				base_relative = 1;
-+			else if (strcmp(argv[i], "--uncompressed") == 0)
-+				uncompressed = 1;
- 			else
- 				usage();
- 		}
---- a/scripts/link-vmlinux.sh
-+++ b/scripts/link-vmlinux.sh
-@@ -192,6 +192,10 @@ kallsyms()
- 		kallsymopt="${kallsymopt} --base-relative"
- 	fi
- 
-+	if [ -n "${CONFIG_KALLSYMS_UNCOMPRESSED}" ]; then
-+		kallsymopt="${kallsymopt} --uncompressed"
-+	fi
-+
- 	info KSYMS ${2}
- 	${NM} -n ${1} | scripts/kallsyms ${kallsymopt} > ${2}
- }
diff --git a/target/linux/generic/pending-5.10/205-backtrace_module_info.patch b/target/linux/generic/pending-5.10/205-backtrace_module_info.patch
deleted file mode 100644
index f1f35c9923a6..000000000000
--- a/target/linux/generic/pending-5.10/205-backtrace_module_info.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: when KALLSYMS is disabled, print module address + size for matching backtrace entries
-
-[john@phrozen.org: felix will add this to his upstream queue]
-
-lede-commit 53827cdc824556cda910b23ce5030c363b8f1461
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- lib/vsprintf.c | 15 +++++++++++----
- 1 file changed, 11 insertions(+), 4 deletions(-)
-
---- a/lib/vsprintf.c
-+++ b/lib/vsprintf.c
-@@ -985,8 +985,10 @@ char *symbol_string(char *buf, char *end
- 		    struct printf_spec spec, const char *fmt)
- {
- 	unsigned long value;
--#ifdef CONFIG_KALLSYMS
- 	char sym[KSYM_SYMBOL_LEN];
-+#ifndef CONFIG_KALLSYMS
-+	struct module *mod;
-+	int len;
- #endif
- 
- 	if (fmt[1] == 'R')
-@@ -1003,8 +1005,14 @@ char *symbol_string(char *buf, char *end
- 
- 	return string_nocheck(buf, end, sym, spec);
- #else
--	return special_hex_number(buf, end, value, sizeof(void *));
-+	len = snprintf(sym, sizeof(sym), "0x%lx", value);
-+	mod = __module_address(value);
-+	if (mod)
-+		snprintf(sym + len, sizeof(sym) - len, " [%s@%p+0x%x]",
-+			 mod->name, mod->core_layout.base,
-+			 mod->core_layout.size);
- #endif
-+	return string(buf, end, sym, spec);
- }
- 
- static const struct printf_spec default_str_spec = {
diff --git a/target/linux/generic/pending-5.10/240-remove-unsane-filenames-from-deps_initramfs-list.patch b/target/linux/generic/pending-5.10/240-remove-unsane-filenames-from-deps_initramfs-list.patch
deleted file mode 100644
index 29cfade71635..000000000000
--- a/target/linux/generic/pending-5.10/240-remove-unsane-filenames-from-deps_initramfs-list.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: usr: sanitize deps_initramfs list
-
-If any filename in the intramfs dependency
-list contains a colon, that causes a kernel
-build error like this:
-
-/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
-make[5]: *** [usr] Error 2
-
-Fix it by removing such filenames from the
-deps_initramfs list.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- usr/Makefile | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/usr/Makefile
-+++ b/usr/Makefile
-@@ -61,6 +61,8 @@ hostprogs := gen_init_cpio
- # The dependency list is generated by gen_initramfs.sh -l
- -include $(obj)/.initramfs_data.cpio.d
- 
-+deps_initramfs := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v)))
-+
- # do not try to update files included in initramfs
- $(deps_initramfs): ;
- 
diff --git a/target/linux/generic/pending-5.10/261-enable_wilink_platform_without_drivers.patch b/target/linux/generic/pending-5.10/261-enable_wilink_platform_without_drivers.patch
deleted file mode 100644
index cd31f9d93429..000000000000
--- a/target/linux/generic/pending-5.10/261-enable_wilink_platform_without_drivers.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Imre Kaloz <kaloz@openwrt.org>
-Subject: [PATCH] hack: net: wireless: make the wl12xx glue code available with
- compat-wireless, too
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- drivers/net/wireless/ti/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ti/Kconfig
-+++ b/drivers/net/wireless/ti/Kconfig
-@@ -20,7 +20,7 @@ source "drivers/net/wireless/ti/wlcore/K
- 
- config WILINK_PLATFORM_DATA
- 	bool "TI WiLink platform data"
--	depends on WLCORE_SDIO || WL1251_SDIO
-+	depends on WLCORE_SDIO || WL1251_SDIO || ARCH_OMAP2PLUS
- 	default y
- 	help
- 	Small platform data bit needed to pass data to the sdio modules.
diff --git a/target/linux/generic/pending-5.10/270-platform-mikrotik-build-bits.patch b/target/linux/generic/pending-5.10/270-platform-mikrotik-build-bits.patch
deleted file mode 100644
index df738ef97b0a..000000000000
--- a/target/linux/generic/pending-5.10/270-platform-mikrotik-build-bits.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From c2deb5ef01a0ef09088832744cbace9e239a6ee0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= <hacks@slashdirt.org>
-Date: Sat, 28 Mar 2020 12:11:50 +0100
-Subject: [PATCH] generic: platform/mikrotik build bits (5.4)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds platform/mikrotik kernel build bits
-
-Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
----
- drivers/platform/Kconfig  | 2 ++
- drivers/platform/Makefile | 1 +
- 2 files changed, 3 insertions(+)
-
---- a/drivers/platform/Kconfig
-+++ b/drivers/platform/Kconfig
-@@ -13,3 +13,5 @@ source "drivers/platform/chrome/Kconfig"
- source "drivers/platform/mellanox/Kconfig"
- 
- source "drivers/platform/olpc/Kconfig"
-+
-+source "drivers/platform/mikrotik/Kconfig"
---- a/drivers/platform/Makefile
-+++ b/drivers/platform/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_MIPS)		+= mips/
- obj-$(CONFIG_OLPC_EC)		+= olpc/
- obj-$(CONFIG_GOLDFISH)		+= goldfish/
- obj-$(CONFIG_CHROME_PLATFORMS)	+= chrome/
-+obj-$(CONFIG_MIKROTIK)		+= mikrotik/
diff --git a/target/linux/generic/pending-5.10/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-5.10/300-mips_expose_boot_raw.patch
deleted file mode 100644
index 706c5dee224d..000000000000
--- a/target/linux/generic/pending-5.10/300-mips_expose_boot_raw.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From: Mark Miller <mark@mirell.org>
-Subject: mips: expose CONFIG_BOOT_RAW
-
-This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
-certain Broadcom chipsets running CFE in order to load the kernel.
-
-Signed-off-by: Mark Miller <mark@mirell.org>
-Acked-by: Rob Landley <rob@landley.net>
----
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1085,9 +1085,6 @@ config FW_ARC
- config ARCH_MAY_HAVE_PC_FDC
- 	bool
- 
--config BOOT_RAW
--	bool
--
- config CEVT_BCM1480
- 	bool
- 
-@@ -3182,6 +3179,18 @@ choice
- 		bool "Extend builtin kernel arguments with bootloader arguments"
- endchoice
- 
-+config BOOT_RAW
-+	bool "Enable the kernel to be executed from the load address"
-+	default n
-+	help
-+	 Allow the kernel to be executed from the load address for
-+	 bootloaders which cannot read the ELF format. This places
-+	 a jump to start_kernel at the load address.
-+
-+	 If unsure, say N.
-+
-+
-+
- endmenu
- 
- config LOCKDEP_SUPPORT
diff --git a/target/linux/generic/pending-5.10/301-MIPS-Add-barriers-between-dcache-icache-flushes.patch b/target/linux/generic/pending-5.10/301-MIPS-Add-barriers-between-dcache-icache-flushes.patch
deleted file mode 100644
index 726c884027f1..000000000000
--- a/target/linux/generic/pending-5.10/301-MIPS-Add-barriers-between-dcache-icache-flushes.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From e6e6ef4275978823ec3a84133fc91f4ffbef5c84 Mon Sep 17 00:00:00 2001
-From: Paul Burton <paul.burton@imgtec.com>
-Date: Mon, 22 Feb 2016 18:09:44 +0000
-Subject: [PATCH] MIPS: Add barriers between dcache & icache flushes
-
-Index-based cache operations may be arbitrarily reordered by out of
-order CPUs. Thus code which writes back the dcache & then invalidates
-the icache using indexed cache ops must include a barrier between
-operating on the 2 caches in order to prevent the scenario in which:
-
-  - icache invalidation occurs.
-
-  - icache fetch occurs, due to speculation.
-
-  - dcache writeback occurs.
-
-If the above were allowed to happen then the icache would contain stale
-data. Forcing the dcache writeback to complete before the icache
-invalidation avoids this.
-
-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
-Cc: James Hogan <james.hogan@imgtec.com>
----
- arch/mips/mm/c-r4k.c | 13 +++++++++++--
- 1 file changed, 11 insertions(+), 2 deletions(-)
-
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -515,6 +515,7 @@ static inline void local_r4k___flush_cac
- 
- 	default:
- 		r4k_blast_dcache();
-+		mb(); /* cache instructions may be reordered */
- 		r4k_blast_icache();
- 		break;
- 	}
-@@ -595,8 +596,10 @@ static inline void local_r4k_flush_cache
- 	if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc))
- 		r4k_blast_dcache();
- 	/* If executable, blast stale lines from icache */
--	if (exec)
-+	if (exec) {
-+		mb(); /* cache instructions may be reordered */
- 		r4k_blast_icache();
-+	}
- }
- 
- static void r4k_flush_cache_range(struct vm_area_struct *vma,
-@@ -697,8 +700,13 @@ static inline void local_r4k_flush_cache
- 	if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
- 		vaddr ? r4k_blast_dcache_page(addr) :
- 			r4k_blast_dcache_user_page(addr);
--		if (exec && !cpu_icache_snoops_remote_store)
-+		if (exec)
-+			mb(); /* cache instructions may be reordered */
-+
-+		if (exec && !cpu_icache_snoops_remote_store) {
- 			r4k_blast_scache_page(addr);
-+			mb(); /* cache instructions may be reordered */
-+		}
- 	}
- 	if (exec) {
- 		if (vaddr && cpu_has_vtag_icache && mm == current->active_mm) {
-@@ -765,6 +773,7 @@ static inline void __local_r4k_flush_ica
- 			else
- 				blast_dcache_range(start, end);
- 		}
-+		mb(); /* cache instructions may be reordered */
- 	}
- 
- 	if (type == R4K_INDEX ||
diff --git a/target/linux/generic/pending-5.10/302-mips_no_branch_likely.patch b/target/linux/generic/pending-5.10/302-mips_no_branch_likely.patch
deleted file mode 100644
index 271923fca8c1..000000000000
--- a/target/linux/generic/pending-5.10/302-mips_no_branch_likely.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mips: use -mno-branch-likely for kernel and userspace
-
-saves ~11k kernel size after lzma and ~12k squashfs size in the
-
-lede-commit: 41a039f46450ffae9483d6216422098669da2900
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -95,7 +95,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- # machines may also.  Since BFD is incredibly buggy with respect to
- # crossformat linking we rely on the elf2ecoff tool for format conversion.
- #
--cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
-+cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y			+= -msoft-float
- LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
- KBUILD_AFLAGS_MODULE		+= -mlong-calls
diff --git a/target/linux/generic/pending-5.10/305-mips_module_reloc.patch b/target/linux/generic/pending-5.10/305-mips_module_reloc.patch
deleted file mode 100644
index 839ba2429309..000000000000
--- a/target/linux/generic/pending-5.10/305-mips_module_reloc.patch
+++ /dev/null
@@ -1,371 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mips: replace -mlong-calls with -mno-long-calls to make function calls faster in kernel modules to achieve this, try to
-
-lede-commit: 3b3d64743ba2a874df9d70cd19e242205b0a788c
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile             |   5 +
- arch/mips/include/asm/module.h |   5 +
- arch/mips/kernel/module.c      | 279 ++++++++++++++++++++++++++++++++++++++++-
- 3 files changed, 284 insertions(+), 5 deletions(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -98,8 +98,18 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y			+= -msoft-float
- LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
-+ifdef CONFIG_64BIT
- KBUILD_AFLAGS_MODULE		+= -mlong-calls
- KBUILD_CFLAGS_MODULE		+= -mlong-calls
-+else
-+  ifdef CONFIG_DYNAMIC_FTRACE
-+    KBUILD_AFLAGS_MODULE	+= -mlong-calls
-+    KBUILD_CFLAGS_MODULE	+= -mlong-calls
-+  else
-+    KBUILD_AFLAGS_MODULE	+= -mno-long-calls
-+    KBUILD_CFLAGS_MODULE	+= -mno-long-calls
-+  endif
-+endif
- 
- ifeq ($(CONFIG_RELOCATABLE),y)
- LDFLAGS_vmlinux			+= --emit-relocs
---- a/arch/mips/include/asm/module.h
-+++ b/arch/mips/include/asm/module.h
-@@ -12,6 +12,11 @@ struct mod_arch_specific {
- 	const struct exception_table_entry *dbe_start;
- 	const struct exception_table_entry *dbe_end;
- 	struct mips_hi16 *r_mips_hi16_list;
-+
-+	void *phys_plt_tbl;
-+	void *virt_plt_tbl;
-+	unsigned int phys_plt_offset;
-+	unsigned int virt_plt_offset;
- };
- 
- typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
---- a/arch/mips/kernel/module.c
-+++ b/arch/mips/kernel/module.c
-@@ -31,14 +31,221 @@ struct mips_hi16 {
- static LIST_HEAD(dbe_list);
- static DEFINE_SPINLOCK(dbe_lock);
- 
--#ifdef MODULE_START
-+/*
-+ * Get the potential max trampolines size required of the init and
-+ * non-init sections. Only used if we cannot find enough contiguous
-+ * physically mapped memory to put the module into.
-+ */
-+static unsigned int
-+get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-+             const char *secstrings, unsigned int symindex, bool is_init)
-+{
-+	unsigned long ret = 0;
-+	unsigned int i, j;
-+	Elf_Sym *syms;
-+
-+	/* Everything marked ALLOC (this includes the exported symbols) */
-+	for (i = 1; i < hdr->e_shnum; ++i) {
-+		unsigned int info = sechdrs[i].sh_info;
-+
-+		if (sechdrs[i].sh_type != SHT_REL
-+		    && sechdrs[i].sh_type != SHT_RELA)
-+			continue;
-+
-+		/* Not a valid relocation section? */
-+		if (info >= hdr->e_shnum)
-+			continue;
-+
-+		/* Don't bother with non-allocated sections */
-+		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
-+			continue;
-+
-+		/* If it's called *.init*, and we're not init, we're
-+                   not interested */
-+		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-+		    != is_init)
-+			continue;
-+
-+		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
-+		if (sechdrs[i].sh_type == SHT_REL) {
-+			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
-+			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
-+
-+			for (j = 0; j < size; ++j) {
-+				Elf_Sym *sym;
-+
-+				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
-+					continue;
-+
-+				sym = syms + ELF_MIPS_R_SYM(rel[j]);
-+				if (!is_init && sym->st_shndx != SHN_UNDEF)
-+					continue;
-+
-+				ret += 4 * sizeof(int);
-+			}
-+		} else {
-+			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
-+			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
-+
-+			for (j = 0; j < size; ++j) {
-+				Elf_Sym *sym;
-+
-+				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
-+					continue;
-+
-+				sym = syms + ELF_MIPS_R_SYM(rela[j]);
-+				if (!is_init && sym->st_shndx != SHN_UNDEF)
-+					continue;
-+
-+				ret += 4 * sizeof(int);
-+			}
-+		}
-+	}
-+
-+	return ret;
-+}
-+
-+#ifndef MODULE_START
-+static void *alloc_phys(unsigned long size)
-+{
-+	unsigned order;
-+	struct page *page;
-+	struct page *p;
-+
-+	size = PAGE_ALIGN(size);
-+	order = get_order(size);
-+
-+	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
-+			__GFP_THISNODE, order);
-+	if (!page)
-+		return NULL;
-+
-+	split_page(page, order);
-+
-+	/* mark all pages except for the last one */
-+	for (p = page; p + 1 < page + (size >> PAGE_SHIFT); ++p)
-+		set_bit(PG_owner_priv_1, &p->flags);
-+
-+	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
-+		__free_page(p);
-+
-+	return page_address(page);
-+}
-+#endif
-+
-+static void free_phys(void *ptr)
-+{
-+	struct page *page;
-+	bool free;
-+
-+	page = virt_to_page(ptr);
-+	do {
-+		free = test_and_clear_bit(PG_owner_priv_1, &page->flags);
-+		__free_page(page);
-+		page++;
-+	} while (free);
-+}
-+
-+
- void *module_alloc(unsigned long size)
- {
-+#ifdef MODULE_START
- 	return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
- 				GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE,
- 				__builtin_return_address(0));
-+#else
-+	void *ptr;
-+
-+	if (size == 0)
-+		return NULL;
-+
-+	ptr = alloc_phys(size);
-+
-+	/* If we failed to allocate physically contiguous memory,
-+	 * fall back to regular vmalloc. The module loader code will
-+	 * create jump tables to handle long jumps */
-+	if (!ptr)
-+		return vmalloc(size);
-+
-+	return ptr;
-+#endif
- }
-+
-+static inline bool is_phys_addr(void *ptr)
-+{
-+#ifdef CONFIG_64BIT
-+	return (KSEGX((unsigned long)ptr) == CKSEG0);
-+#else
-+	return (KSEGX(ptr) == KSEG0);
- #endif
-+}
-+
-+/* Free memory returned from module_alloc */
-+void module_memfree(void *module_region)
-+{
-+	if (is_phys_addr(module_region))
-+		free_phys(module_region);
-+	else
-+		vfree(module_region);
-+}
-+
-+static void *__module_alloc(int size, bool phys)
-+{
-+	void *ptr;
-+
-+	if (phys)
-+		ptr = kmalloc(size, GFP_KERNEL);
-+	else
-+		ptr = vmalloc(size);
-+	return ptr;
-+}
-+
-+static void __module_free(void *ptr)
-+{
-+	if (is_phys_addr(ptr))
-+		kfree(ptr);
-+	else
-+		vfree(ptr);
-+}
-+
-+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
-+			      char *secstrings, struct module *mod)
-+{
-+	unsigned int symindex = 0;
-+	unsigned int core_size, init_size;
-+	int i;
-+
-+	mod->arch.phys_plt_offset = 0;
-+	mod->arch.virt_plt_offset = 0;
-+	mod->arch.phys_plt_tbl = NULL;
-+	mod->arch.virt_plt_tbl = NULL;
-+
-+	if (IS_ENABLED(CONFIG_64BIT))
-+		return 0;
-+
-+	for (i = 1; i < hdr->e_shnum; i++)
-+		if (sechdrs[i].sh_type == SHT_SYMTAB)
-+			symindex = i;
-+
-+	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
-+	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
-+
-+	if ((core_size + init_size) == 0)
-+		return 0;
-+
-+	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
-+	if (!mod->arch.phys_plt_tbl)
-+		return -ENOMEM;
-+
-+	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
-+	if (!mod->arch.virt_plt_tbl) {
-+		__module_free(mod->arch.phys_plt_tbl);
-+		mod->arch.phys_plt_tbl = NULL;
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
- 
- static int apply_r_mips_none(struct module *me, u32 *location,
- 			     u32 base, Elf_Addr v, bool rela)
-@@ -54,9 +261,40 @@ static int apply_r_mips_32(struct module
- 	return 0;
- }
- 
-+static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
-+				 void *start, Elf_Addr v)
-+{
-+	unsigned *tramp = start + *plt_offset;
-+	*plt_offset += 4 * sizeof(int);
-+
-+	/* adjust carry for addiu */
-+	if (v & 0x00008000)
-+		v += 0x10000;
-+
-+	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
-+	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
-+	tramp[2] = 0x03200008;                  /* jr t9 */
-+	tramp[3] = 0x00000000;                  /* nop */
-+
-+	return (Elf_Addr) tramp;
-+}
-+
-+static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
-+{
-+	if (is_phys_addr(location))
-+		return add_plt_entry_to(&me->arch.phys_plt_offset,
-+				me->arch.phys_plt_tbl, v);
-+	else
-+		return add_plt_entry_to(&me->arch.virt_plt_offset,
-+				me->arch.virt_plt_tbl, v);
-+
-+}
-+
- static int apply_r_mips_26(struct module *me, u32 *location,
- 			   u32 base, Elf_Addr v, bool rela)
- {
-+	u32 ofs = base & 0x03ffffff;
-+
- 	if (v % 4) {
- 		pr_err("module %s: dangerous R_MIPS_26 relocation\n",
- 		       me->name);
-@@ -64,13 +302,17 @@ static int apply_r_mips_26(struct module
- 	}
- 
- 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
--		pr_err("module %s: relocation overflow\n",
--		       me->name);
--		return -ENOEXEC;
-+		v = add_plt_entry(me, location, v + (ofs << 2));
-+		if (!v) {
-+			pr_err("module %s: relocation overflow\n",
-+			       me->name);
-+			return -ENOEXEC;
-+		}
-+		ofs = 0;
- 	}
- 
- 	*location = (*location & ~0x03ffffff) |
--		    ((base + (v >> 2)) & 0x03ffffff);
-+		    ((ofs + (v >> 2)) & 0x03ffffff);
- 
- 	return 0;
- }
-@@ -446,9 +688,36 @@ int module_finalize(const Elf_Ehdr *hdr,
- 		list_add(&me->arch.dbe_list, &dbe_list);
- 		spin_unlock_irq(&dbe_lock);
- 	}
-+
-+	/* Get rid of the fixup trampoline if we're running the module
-+	 * from physically mapped address space */
-+	if (me->arch.phys_plt_offset == 0) {
-+		__module_free(me->arch.phys_plt_tbl);
-+		me->arch.phys_plt_tbl = NULL;
-+	}
-+	if (me->arch.virt_plt_offset == 0) {
-+		__module_free(me->arch.virt_plt_tbl);
-+		me->arch.virt_plt_tbl = NULL;
-+	}
-+
- 	return 0;
- }
- 
-+void module_arch_freeing_init(struct module *mod)
-+{
-+	if (mod->state == MODULE_STATE_LIVE)
-+		return;
-+
-+	if (mod->arch.phys_plt_tbl) {
-+		__module_free(mod->arch.phys_plt_tbl);
-+		mod->arch.phys_plt_tbl = NULL;
-+	}
-+	if (mod->arch.virt_plt_tbl) {
-+		__module_free(mod->arch.virt_plt_tbl);
-+		mod->arch.virt_plt_tbl = NULL;
-+	}
-+}
-+
- void module_arch_cleanup(struct module *mod)
- {
- 	spin_lock_irq(&dbe_lock);
diff --git a/target/linux/generic/pending-5.10/307-mips_highmem_offset.patch b/target/linux/generic/pending-5.10/307-mips_highmem_offset.patch
deleted file mode 100644
index e1ada22f34f7..000000000000
--- a/target/linux/generic/pending-5.10/307-mips_highmem_offset.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems with >256M RAM
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/include/asm/mach-generic/spaces.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-generic/spaces.h
-+++ b/arch/mips/include/asm/mach-generic/spaces.h
-@@ -54,7 +54,7 @@
-  * Memory above this physical address will be considered highmem.
-  */
- #ifndef HIGHMEM_START
--#define HIGHMEM_START		_AC(0x20000000, UL)
-+#define HIGHMEM_START		_AC(0x10000000, UL)
- #endif
- 
- #endif /* CONFIG_32BIT */
diff --git a/target/linux/generic/pending-5.10/308-mips32r2_tune.patch b/target/linux/generic/pending-5.10/308-mips32r2_tune.patch
deleted file mode 100644
index bbea9473824b..000000000000
--- a/target/linux/generic/pending-5.10/308-mips32r2_tune.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2
-
-This provides a good tradeoff across at least 24Kc-74Kc, while also
-producing smaller code.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -174,7 +174,7 @@ cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4
- cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
- cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS32_R1)	+= -march=mips32 -Wa,--trap
--cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -Wa,--trap
-+cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -mtune=34kc -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS32_R5)	+= -march=mips32r5 -Wa,--trap -modd-spreg
- cflags-$(CONFIG_CPU_MIPS32_R6)	+= -march=mips32r6 -Wa,--trap -modd-spreg
- cflags-$(CONFIG_CPU_MIPS64_R1)	+= -march=mips64 -Wa,--trap
diff --git a/target/linux/generic/pending-5.10/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch b/target/linux/generic/pending-5.10/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch
deleted file mode 100644
index 794f027f181f..000000000000
--- a/target/linux/generic/pending-5.10/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From 87ec87c2ad615c1a177cd08ef5fa29fc739f6e50 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 23 Dec 2018 18:06:53 +0100
-Subject: [PATCH] MIPS: Add CPU option reporting to /proc/cpuinfo
-
-Many MIPS CPUs have optional CPU features which are not activates for
-all CPU cores. Print the CPU options which are implemented in the core
-in /proc/cpuinfo. This makes it possible to see what features are
-supported and which are not supported. This should cover all standard
-MIPS extensions, before it only printed information about the main MIPS
-ASEs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/kernel/proc.c | 116 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 116 insertions(+)
-
---- a/arch/mips/kernel/proc.c
-+++ b/arch/mips/kernel/proc.c
-@@ -138,6 +138,120 @@ static int show_cpuinfo(struct seq_file
- 		seq_printf(m, "micromips kernel\t: %s\n",
- 		      (read_c0_config3() & MIPS_CONF3_ISA_OE) ?  "yes" : "no");
- 	}
-+
-+	seq_printf(m, "Options implemented\t:");
-+	if (cpu_has_tlb)
-+		seq_printf(m, "%s", " tlb");
-+	if (cpu_has_ftlb)
-+		seq_printf(m, "%s", " ftlb");
-+	if (cpu_has_tlbinv)
-+		seq_printf(m, "%s", " tlbinv");
-+	if (cpu_has_segments)
-+		seq_printf(m, "%s", " segments");
-+	if (cpu_has_rixiex)
-+		seq_printf(m, "%s", " rixiex");
-+	if (cpu_has_ldpte)
-+		seq_printf(m, "%s", " ldpte");
-+	if (cpu_has_maar)
-+		seq_printf(m, "%s", " maar");
-+	if (cpu_has_rw_llb)
-+		seq_printf(m, "%s", " rw_llb");
-+	if (cpu_has_4kex)
-+		seq_printf(m, "%s", " 4kex");
-+	if (cpu_has_3k_cache)
-+		seq_printf(m, "%s", " 3k_cache");
-+	if (cpu_has_4k_cache)
-+		seq_printf(m, "%s", " 4k_cache");
-+	if (cpu_has_6k_cache)
-+		seq_printf(m, "%s", " 6k_cache");
-+	if (cpu_has_8k_cache)
-+		seq_printf(m, "%s", " 8k_cache");
-+	if (cpu_has_tx39_cache)
-+		seq_printf(m, "%s", " tx39_cache");
-+	if (cpu_has_octeon_cache)
-+		seq_printf(m, "%s", " octeon_cache");
-+	if (cpu_has_fpu)
-+		seq_printf(m, "%s", " fpu");
-+	if (cpu_has_32fpr)
-+		seq_printf(m, "%s", " 32fpr");
-+	if (cpu_has_cache_cdex_p)
-+		seq_printf(m, "%s", " cache_cdex_p");
-+	if (cpu_has_cache_cdex_s)
-+		seq_printf(m, "%s", " cache_cdex_s");
-+	if (cpu_has_prefetch)
-+		seq_printf(m, "%s", " prefetch");
-+	if (cpu_has_mcheck)
-+		seq_printf(m, "%s", " mcheck");
-+	if (cpu_has_ejtag)
-+		seq_printf(m, "%s", " ejtag");
-+	if (cpu_has_llsc)
-+		seq_printf(m, "%s", " llsc");
-+	if (cpu_has_guestctl0ext)
-+		seq_printf(m, "%s", " guestctl0ext");
-+	if (cpu_has_guestctl1)
-+		seq_printf(m, "%s", " guestctl1");
-+	if (cpu_has_guestctl2)
-+		seq_printf(m, "%s", " guestctl2");
-+	if (cpu_has_guestid)
-+		seq_printf(m, "%s", " guestid");
-+	if (cpu_has_drg)
-+		seq_printf(m, "%s", " drg");
-+	if (cpu_has_rixi)
-+		seq_printf(m, "%s", " rixi");
-+	if (cpu_has_lpa)
-+		seq_printf(m, "%s", " lpa");
-+	if (cpu_has_mvh)
-+		seq_printf(m, "%s", " mvh");
-+	if (cpu_has_vtag_icache)
-+		seq_printf(m, "%s", " vtag_icache");
-+	if (cpu_has_dc_aliases)
-+		seq_printf(m, "%s", " dc_aliases");
-+	if (cpu_has_ic_fills_f_dc)
-+		seq_printf(m, "%s", " ic_fills_f_dc");
-+	if (cpu_has_pindexed_dcache)
-+		seq_printf(m, "%s", " pindexed_dcache");
-+	if (cpu_has_userlocal)
-+		seq_printf(m, "%s", " userlocal");
-+	if (cpu_has_nofpuex)
-+		seq_printf(m, "%s", " nofpuex");
-+	if (cpu_has_vint)
-+		seq_printf(m, "%s", " vint");
-+	if (cpu_has_veic)
-+		seq_printf(m, "%s", " veic");
-+	if (cpu_has_inclusive_pcaches)
-+		seq_printf(m, "%s", " inclusive_pcaches");
-+	if (cpu_has_perf_cntr_intr_bit)
-+		seq_printf(m, "%s", " perf_cntr_intr_bit");
-+	if (cpu_has_ufr)
-+		seq_printf(m, "%s", " ufr");
-+	if (cpu_has_fre)
-+		seq_printf(m, "%s", " fre");
-+	if (cpu_has_cdmm)
-+		seq_printf(m, "%s", " cdmm");
-+	if (cpu_has_small_pages)
-+		seq_printf(m, "%s", " small_pages");
-+	if (cpu_has_nan_legacy)
-+		seq_printf(m, "%s", " nan_legacy");
-+	if (cpu_has_nan_2008)
-+		seq_printf(m, "%s", " nan_2008");
-+	if (cpu_has_ebase_wg)
-+		seq_printf(m, "%s", " ebase_wg");
-+	if (cpu_has_badinstr)
-+		seq_printf(m, "%s", " badinstr");
-+	if (cpu_has_badinstrp)
-+		seq_printf(m, "%s", " badinstrp");
-+	if (cpu_has_contextconfig)
-+		seq_printf(m, "%s", " contextconfig");
-+	if (cpu_has_perf)
-+		seq_printf(m, "%s", " perf");
-+	if (cpu_has_shared_ftlb_ram)
-+		seq_printf(m, "%s", " shared_ftlb_ram");
-+	if (cpu_has_shared_ftlb_entries)
-+		seq_printf(m, "%s", " shared_ftlb_entries");
-+	if (cpu_has_mipsmt_pertccounters)
-+		seq_printf(m, "%s", " mipsmt_pertccounters");
-+	seq_printf(m, "\n");
-+
- 	seq_printf(m, "shadow register sets\t: %d\n",
- 		      cpu_data[n].srsets);
- 	seq_printf(m, "kscratch registers\t: %d\n",
diff --git a/target/linux/generic/pending-5.10/310-arm_module_unresolved_weak_sym.patch b/target/linux/generic/pending-5.10/310-arm_module_unresolved_weak_sym.patch
deleted file mode 100644
index 191dc6ac3cd9..000000000000
--- a/target/linux/generic/pending-5.10/310-arm_module_unresolved_weak_sym.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fix errors in unresolved weak symbols on arm
-
-lede-commit: 570699d4838a907c3ef9f2819bf19eb72997b32f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/arm/kernel/module.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/kernel/module.c
-+++ b/arch/arm/kernel/module.c
-@@ -105,6 +105,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
- 			return -ENOEXEC;
- 		}
- 
-+		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
-+		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
-+			continue;
-+
- 		loc = dstsec->sh_addr + rel->r_offset;
- 
- 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/pending-5.10/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch b/target/linux/generic/pending-5.10/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
deleted file mode 100644
index 2808c9532296..000000000000
--- a/target/linux/generic/pending-5.10/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
+++ /dev/null
@@ -1,281 +0,0 @@
-From: Yousong Zhou <yszhou4tech@gmail.com>
-Subject: MIPS: kexec: Accept command line parameters from userspace.
-
-Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
----
- arch/mips/kernel/machine_kexec.c   |  153 +++++++++++++++++++++++++++++++-----
- arch/mips/kernel/machine_kexec.h   |   20 +++++
- arch/mips/kernel/relocate_kernel.S |   21 +++--
- 3 files changed, 167 insertions(+), 27 deletions(-)
- create mode 100644 arch/mips/kernel/machine_kexec.h
-
---- a/arch/mips/kernel/machine_kexec.c
-+++ b/arch/mips/kernel/machine_kexec.c
-@@ -9,14 +9,11 @@
- #include <linux/delay.h>
- #include <linux/libfdt.h>
- 
-+#include <asm/bootinfo.h>
- #include <asm/cacheflush.h>
- #include <asm/page.h>
--
--extern const unsigned char relocate_new_kernel[];
--extern const size_t relocate_new_kernel_size;
--
--extern unsigned long kexec_start_address;
--extern unsigned long kexec_indirection_page;
-+#include <linux/uaccess.h>
-+#include "machine_kexec.h"
- 
- static unsigned long reboot_code_buffer;
- 
-@@ -30,6 +27,101 @@ void (*_crash_smp_send_stop)(void) = NUL
- void (*_machine_kexec_shutdown)(void) = NULL;
- void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
- 
-+static void machine_kexec_print_args(void)
-+{
-+	unsigned long argc = (int)kexec_args[0];
-+	int i;
-+
-+	pr_info("kexec_args[0] (argc): %lu\n", argc);
-+	pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
-+	pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
-+	pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
-+
-+	for (i = 0; i < argc; i++) {
-+		pr_info("kexec_argv[%d] = %p, %s\n",
-+				i, kexec_argv[i], kexec_argv[i]);
-+	}
-+}
-+
-+static void machine_kexec_init_argv(struct kimage *image)
-+{
-+	void __user *buf = NULL;
-+	size_t bufsz;
-+	size_t size;
-+	int i;
-+
-+	bufsz = 0;
-+	for (i = 0; i < image->nr_segments; i++) {
-+		struct kexec_segment *seg;
-+
-+		seg = &image->segment[i];
-+		if (seg->bufsz < 6)
-+			continue;
-+
-+		if (strncmp((char *) seg->buf, "kexec ", 6))
-+			continue;
-+
-+		buf = seg->buf;
-+		bufsz = seg->bufsz;
-+		break;
-+	}
-+
-+	if (!buf)
-+		return;
-+
-+	size = KEXEC_COMMAND_LINE_SIZE;
-+	size = min(size, bufsz);
-+	if (size < bufsz)
-+		pr_warn("kexec command line truncated to %zd bytes\n", size);
-+
-+	/* Copy to kernel space */
-+	if (copy_from_user(kexec_argv_buf, buf, size))
-+		pr_warn("kexec command line copy to kernel space failed\n");
-+
-+	kexec_argv_buf[size - 1] = 0;
-+}
-+
-+static void machine_kexec_parse_argv(struct kimage *image)
-+{
-+	char *reboot_code_buffer;
-+	int reloc_delta;
-+	char *ptr;
-+	int argc;
-+	int i;
-+
-+	ptr = kexec_argv_buf;
-+	argc = 0;
-+
-+	/*
-+	 * convert command line string to array of parameters
-+	 * (as bootloader does).
-+	 */
-+	while (ptr && *ptr && (KEXEC_MAX_ARGC > argc)) {
-+		if (*ptr == ' ') {
-+			*ptr++ = '\0';
-+			continue;
-+		}
-+
-+		kexec_argv[argc++] = ptr;
-+		ptr = strchr(ptr, ' ');
-+	}
-+
-+	if (!argc)
-+		return;
-+
-+	kexec_args[0] = argc;
-+	kexec_args[1] = (unsigned long)kexec_argv;
-+	kexec_args[2] = 0;
-+	kexec_args[3] = 0;
-+
-+	reboot_code_buffer = page_address(image->control_code_page);
-+	reloc_delta = reboot_code_buffer - (char *)kexec_relocate_new_kernel;
-+
-+	kexec_args[1] += reloc_delta;
-+	for (i = 0; i < argc; i++)
-+		kexec_argv[i] += reloc_delta;
-+}
-+
- static void kexec_image_info(const struct kimage *kimage)
- {
- 	unsigned long i;
-@@ -99,6 +191,18 @@ machine_kexec_prepare(struct kimage *kim
- #endif
- 
- 	kexec_image_info(kimage);
-+	/*
-+	 * Whenever arguments passed from kexec-tools, Init the arguments as
-+	 * the original ones to try avoiding booting failure.
-+	 */
-+
-+	kexec_args[0] = fw_arg0;
-+	kexec_args[1] = fw_arg1;
-+	kexec_args[2] = fw_arg2;
-+	kexec_args[3] = fw_arg3;
-+
-+	machine_kexec_init_argv(kimage);
-+	machine_kexec_parse_argv(kimage);
- 
- 	if (_machine_kexec_prepare)
- 		return _machine_kexec_prepare(kimage);
-@@ -161,7 +265,7 @@ machine_crash_shutdown(struct pt_regs *r
- void kexec_nonboot_cpu_jump(void)
- {
- 	local_flush_icache_range((unsigned long)relocated_kexec_smp_wait,
--				 reboot_code_buffer + relocate_new_kernel_size);
-+				 reboot_code_buffer + KEXEC_RELOCATE_NEW_KERNEL_SIZE);
- 
- 	relocated_kexec_smp_wait(NULL);
- }
-@@ -199,7 +303,7 @@ void kexec_reboot(void)
- 	 * machine_kexec() CPU.
- 	 */
- 	local_flush_icache_range(reboot_code_buffer,
--				 reboot_code_buffer + relocate_new_kernel_size);
-+				 reboot_code_buffer + KEXEC_RELOCATE_NEW_KERNEL_SIZE);
- 
- 	do_kexec = (void *)reboot_code_buffer;
- 	do_kexec();
-@@ -212,10 +316,12 @@ machine_kexec(struct kimage *image)
- 	unsigned long *ptr;
- 
- 	reboot_code_buffer =
--	  (unsigned long)page_address(image->control_code_page);
-+		(unsigned long)page_address(image->control_code_page);
-+	pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer);
- 
- 	kexec_start_address =
- 		(unsigned long) phys_to_virt(image->start);
-+	pr_info("kexec_start_address = %p\n", (void *)kexec_start_address);
- 
- 	if (image->type == KEXEC_TYPE_DEFAULT) {
- 		kexec_indirection_page =
-@@ -223,9 +329,19 @@ machine_kexec(struct kimage *image)
- 	} else {
- 		kexec_indirection_page = (unsigned long)&image->head;
- 	}
-+	pr_info("kexec_indirection_page = %p\n", (void *)kexec_indirection_page);
- 
--	memcpy((void*)reboot_code_buffer, relocate_new_kernel,
--	       relocate_new_kernel_size);
-+	pr_info("Where is memcpy: %p\n", memcpy);
-+	pr_info("kexec_relocate_new_kernel = %p, kexec_relocate_new_kernel_end = %p\n",
-+		(void *)kexec_relocate_new_kernel, &kexec_relocate_new_kernel_end);
-+	pr_info("Copy %lu bytes from %p to %p\n", KEXEC_RELOCATE_NEW_KERNEL_SIZE,
-+		(void *)kexec_relocate_new_kernel, (void *)reboot_code_buffer);
-+	memcpy((void*)reboot_code_buffer, kexec_relocate_new_kernel,
-+	       KEXEC_RELOCATE_NEW_KERNEL_SIZE);
-+
-+	pr_info("Before _print_args().\n");
-+	machine_kexec_print_args();
-+	pr_info("Before eval loop.\n");
- 
- 	/*
- 	 * The generic kexec code builds a page list with physical
-@@ -256,7 +372,7 @@ machine_kexec(struct kimage *image)
- #ifdef CONFIG_SMP
- 	/* All secondary cpus now may jump to kexec_wait cycle */
- 	relocated_kexec_smp_wait = reboot_code_buffer +
--		(void *)(kexec_smp_wait - relocate_new_kernel);
-+		(void *)(kexec_smp_wait - kexec_relocate_new_kernel);
- 	smp_wmb();
- 	atomic_set(&kexec_ready_to_reboot, 1);
- #endif
---- /dev/null
-+++ b/arch/mips/kernel/machine_kexec.h
-@@ -0,0 +1,20 @@
-+#ifndef _MACHINE_KEXEC_H
-+#define _MACHINE_KEXEC_H
-+
-+#ifndef __ASSEMBLY__
-+extern const unsigned char kexec_relocate_new_kernel[];
-+extern unsigned long kexec_relocate_new_kernel_end;
-+extern unsigned long kexec_start_address;
-+extern unsigned long kexec_indirection_page;
-+
-+extern char kexec_argv_buf[];
-+extern char *kexec_argv[];
-+
-+#define KEXEC_RELOCATE_NEW_KERNEL_SIZE	((unsigned long)&kexec_relocate_new_kernel_end - (unsigned long)kexec_relocate_new_kernel)
-+#endif /* !__ASSEMBLY__ */
-+
-+#define KEXEC_COMMAND_LINE_SIZE		256
-+#define KEXEC_ARGV_SIZE			(KEXEC_COMMAND_LINE_SIZE / 16)
-+#define KEXEC_MAX_ARGC			(KEXEC_ARGV_SIZE / sizeof(long))
-+
-+#endif
---- a/arch/mips/kernel/relocate_kernel.S
-+++ b/arch/mips/kernel/relocate_kernel.S
-@@ -10,8 +10,9 @@
- #include <asm/mipsregs.h>
- #include <asm/stackframe.h>
- #include <asm/addrspace.h>
-+#include "machine_kexec.h"
- 
--LEAF(relocate_new_kernel)
-+LEAF(kexec_relocate_new_kernel)
- 	PTR_L a0,	arg0
- 	PTR_L a1,	arg1
- 	PTR_L a2,	arg2
-@@ -96,7 +97,7 @@ done:
- #endif
- 	/* jump to kexec_start_address */
- 	j		s1
--	END(relocate_new_kernel)
-+	END(kexec_relocate_new_kernel)
- 
- #ifdef CONFIG_SMP
- /*
-@@ -182,9 +183,15 @@ kexec_indirection_page:
- 	PTR		0
- 	.size		kexec_indirection_page, PTRSIZE
- 
--relocate_new_kernel_end:
-+kexec_argv_buf:
-+	EXPORT(kexec_argv_buf)
-+	.skip		KEXEC_COMMAND_LINE_SIZE
-+	.size		kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE
-+
-+kexec_argv:
-+	EXPORT(kexec_argv)
-+	.skip		KEXEC_ARGV_SIZE
-+	.size		kexec_argv, KEXEC_ARGV_SIZE
- 
--relocate_new_kernel_size:
--	EXPORT(relocate_new_kernel_size)
--	PTR		relocate_new_kernel_end - relocate_new_kernel
--	.size		relocate_new_kernel_size, PTRSIZE
-+kexec_relocate_new_kernel_end:
-+	EXPORT(kexec_relocate_new_kernel_end)
diff --git a/target/linux/generic/pending-5.10/332-arc-add-OWRTDTB-section.patch b/target/linux/generic/pending-5.10/332-arc-add-OWRTDTB-section.patch
deleted file mode 100644
index 4a76e216d570..000000000000
--- a/target/linux/generic/pending-5.10/332-arc-add-OWRTDTB-section.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From bb0c3b0175240bf152fd7c644821a0cf9f77c37c Mon Sep 17 00:00:00 2001
-From: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
-Date: Fri, 15 Mar 2019 18:53:38 +0300
-Subject: [PATCH] arc add OWRTDTB section
-
-This change allows OpenWRT to patch resulting kernel binary with
-external .dtb.
-
-That allows us to re-use exactky the same vmlinux on different boards
-given its ARC core configurations match (at least cache line sizes etc).
-
-""patch-dtb" searches for ASCII "OWRTDTB:" strign and copies external
-.dtb right after it, keeping the string in place.
-
-Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
-Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
----
- arch/arc/kernel/head.S        | 10 ++++++++++
- arch/arc/kernel/setup.c       |  4 +++-
- arch/arc/kernel/vmlinux.lds.S | 13 +++++++++++++
- 3 files changed, 26 insertions(+), 1 deletion(-)
-
---- a/arch/arc/kernel/head.S
-+++ b/arch/arc/kernel/head.S
-@@ -88,6 +88,16 @@
- 	DSP_EARLY_INIT
- .endm
- 
-+	; Here "patch-dtb" will embed external .dtb
-+	; Note "patch-dtb" searches for ASCII "OWRTDTB:" string
-+	; and pastes .dtb right after it, hense the string precedes
-+	; __image_dtb symbol.
-+	.section .owrt, "aw",@progbits
-+	.ascii  "OWRTDTB:"
-+ENTRY(__image_dtb)
-+	.fill   0x4000
-+END(__image_dtb)
-+
- 	.section .init.text, "ax",@progbits
- 
- ;----------------------------------------------------------------
---- a/arch/arc/kernel/setup.c
-+++ b/arch/arc/kernel/setup.c
-@@ -495,6 +495,8 @@ static inline bool uboot_arg_invalid(uns
- /* We always pass 0 as magic from U-boot */
- #define UBOOT_MAGIC_VALUE	0
- 
-+extern struct boot_param_header __image_dtb;
-+
- void __init handle_uboot_args(void)
- {
- 	bool use_embedded_dtb = true;
-@@ -533,7 +535,7 @@ void __init handle_uboot_args(void)
- ignore_uboot_args:
- 
- 	if (use_embedded_dtb) {
--		machine_desc = setup_machine_fdt(__dtb_start);
-+		machine_desc = setup_machine_fdt(&__image_dtb);
- 		if (!machine_desc)
- 			panic("Embedded DT invalid\n");
- 	}
---- a/arch/arc/kernel/vmlinux.lds.S
-+++ b/arch/arc/kernel/vmlinux.lds.S
-@@ -27,6 +27,19 @@ SECTIONS
- 
- 	. = CONFIG_LINUX_LINK_BASE;
- 
-+	/*
-+	* In OpenWRT we want to patch built binary embedding .dtb of choice.
-+	* This is implemented with "patch-dtb" utility which searches for
-+	* "OWRTDTB:" string in first 16k of image and if it is found
-+	* copies .dtb right after mentioned string.
-+	*
-+	* Note: "OWRTDTB:" won't be overwritten with .dtb, .dtb will follow it.
-+	*/
-+	.owrt : {
-+		*(.owrt)
-+	. = ALIGN(PAGE_SIZE);
-+	}
-+
- 	_int_vec_base_lds = .;
- 	.vector : {
- 		*(.vector)
diff --git a/target/linux/generic/pending-5.10/333-arc-enable-unaligned-access-in-kernel-mode.patch b/target/linux/generic/pending-5.10/333-arc-enable-unaligned-access-in-kernel-mode.patch
deleted file mode 100644
index 1848a84cc497..000000000000
--- a/target/linux/generic/pending-5.10/333-arc-enable-unaligned-access-in-kernel-mode.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Alexey Brodkin <abrodkin@synopsys.com>
-Subject: arc: enable unaligned access in kernel mode
-
-This enables misaligned access handling even in kernel mode.
-Some wireless drivers (ath9k-htc and mt7601u) use misaligned accesses
-here and there and to cope with that without fixing stuff in the drivers
-we're just gracefully handling it on ARC.
-
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
----
- arch/arc/kernel/unaligned.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arc/kernel/unaligned.c
-+++ b/arch/arc/kernel/unaligned.c
-@@ -202,7 +202,7 @@ int misaligned_fixup(unsigned long addre
- 	char buf[TASK_COMM_LEN];
- 
- 	/* handle user mode only and only if enabled by sysadmin */
--	if (!user_mode(regs) || !unaligned_enabled)
-+	if (!unaligned_enabled)
- 		return 1;
- 
- 	if (no_unaligned_warning) {
diff --git a/target/linux/generic/pending-5.10/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch b/target/linux/generic/pending-5.10/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
deleted file mode 100644
index 6792a66f8a06..000000000000
--- a/target/linux/generic/pending-5.10/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 66770a004afe10df11d3902e16eaa0c2c39436bb Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Fri, 24 May 2019 17:56:19 +0200
-Subject: [PATCH] powerpc: Enable kernel XZ compression option on PPC_85xx
-
-Enable kernel XZ compression option on PPC_85xx. Tested with
-simpleImage on TP-Link TL-WDR4900 (Freescale P1014 processor).
-
-Suggested-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/powerpc/Kconfig
-+++ b/arch/powerpc/Kconfig
-@@ -214,7 +214,7 @@ config PPC
- 	select HAVE_KERNEL_GZIP
- 	select HAVE_KERNEL_LZMA			if DEFAULT_UIMAGE
- 	select HAVE_KERNEL_LZO			if DEFAULT_UIMAGE
--	select HAVE_KERNEL_XZ			if PPC_BOOK3S || 44x
-+	select HAVE_KERNEL_XZ			if PPC_BOOK3S || 44x || PPC_85xx
- 	select HAVE_KPROBES
- 	select HAVE_KPROBES_ON_FTRACE
- 	select HAVE_KRETPROBES
diff --git a/target/linux/generic/pending-5.10/400-mtd-mtdsplit-support.patch b/target/linux/generic/pending-5.10/400-mtd-mtdsplit-support.patch
deleted file mode 100644
index 89cac887172b..000000000000
--- a/target/linux/generic/pending-5.10/400-mtd-mtdsplit-support.patch
+++ /dev/null
@@ -1,337 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: mtd: Add new Kconfig option for firmware partition split
-
-Add a new kernel config option for generic firmware partition
-split support and change the uImage split support to depend on
-the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
-MTD_SPLIT_FIRMWARE_NAME to make it more generic.
-
-The patch is in preparation for multiple firmware format
-support.
-
-Submitted-by: Gabor Juhos <juhosg@openwrt.org>
-
-SVN-Revision: 38002
----
- drivers/mtd/Kconfig                           |  19 +
- drivers/mtd/mtdpart.c                         | 144 +++++++++++++-----
- include/linux/mtd/partitions.h                |   7 +
- drivers/mtd/Makefile                          |   2 +
- include/linux/mtd/mtd.h                       |  25 +
- 5 files changed, 171 insertions(+), 25 deletions(-)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -12,6 +12,25 @@ menuconfig MTD
- 
- if MTD
- 
-+menu "OpenWrt specific MTD options"
-+
-+config MTD_ROOTFS_ROOT_DEV
-+	bool "Automatically set 'rootfs' partition to be root filesystem"
-+	default y
-+
-+config MTD_SPLIT_FIRMWARE
-+	bool "Automatically split firmware partition for kernel+rootfs"
-+	default y
-+
-+config MTD_SPLIT_FIRMWARE_NAME
-+	string "Firmware partition name"
-+	depends on MTD_SPLIT_FIRMWARE
-+	default "firmware"
-+
-+source "drivers/mtd/mtdsplit/Kconfig"
-+
-+endmenu
-+
- config MTD_TESTS
- 	tristate "MTD tests support (DANGEROUS)"
- 	depends on m
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -15,11 +15,13 @@
- #include <linux/kmod.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/magic.h>
- #include <linux/err.h>
- #include <linux/of.h>
- #include <linux/of_platform.h>
- 
- #include "mtdcore.h"
-+#include "mtdsplit/mtdsplit.h"
- 
- /*
-  * MTD methods which simply translate the effective address and pass through
-@@ -237,6 +239,147 @@ static int mtd_add_partition_attrs(struc
- 	return ret;
- }
- 
-+static DEFINE_SPINLOCK(part_parser_lock);
-+static LIST_HEAD(part_parsers);
-+
-+static struct mtd_part_parser *mtd_part_parser_get(const char *name)
-+{
-+	struct mtd_part_parser *p, *ret = NULL;
-+
-+	spin_lock(&part_parser_lock);
-+
-+	list_for_each_entry(p, &part_parsers, list)
-+		if (!strcmp(p->name, name) && try_module_get(p->owner)) {
-+			ret = p;
-+			break;
-+		}
-+
-+	spin_unlock(&part_parser_lock);
-+
-+	return ret;
-+}
-+
-+static inline void mtd_part_parser_put(const struct mtd_part_parser *p)
-+{
-+	module_put(p->owner);
-+}
-+
-+static struct mtd_part_parser *
-+get_partition_parser_by_type(enum mtd_parser_type type,
-+			     struct mtd_part_parser *start)
-+{
-+	struct mtd_part_parser *p, *ret = NULL;
-+
-+	spin_lock(&part_parser_lock);
-+
-+	p = list_prepare_entry(start, &part_parsers, list);
-+	if (start)
-+		mtd_part_parser_put(start);
-+
-+	list_for_each_entry_continue(p, &part_parsers, list) {
-+		if (p->type == type && try_module_get(p->owner)) {
-+			ret = p;
-+			break;
-+		}
-+	}
-+
-+	spin_unlock(&part_parser_lock);
-+
-+	return ret;
-+}
-+
-+static int parse_mtd_partitions_by_type(struct mtd_info *master,
-+					enum mtd_parser_type type,
-+					const struct mtd_partition **pparts,
-+					struct mtd_part_parser_data *data)
-+{
-+	struct mtd_part_parser *prev = NULL;
-+	int ret = 0;
-+
-+	while (1) {
-+		struct mtd_part_parser *parser;
-+
-+		parser = get_partition_parser_by_type(type, prev);
-+		if (!parser)
-+			break;
-+
-+		ret = (*parser->parse_fn)(master, pparts, data);
-+
-+		if (ret > 0) {
-+			mtd_part_parser_put(parser);
-+			printk(KERN_NOTICE
-+			       "%d %s partitions found on MTD device %s\n",
-+			       ret, parser->name, master->name);
-+			break;
-+		}
-+
-+		prev = parser;
-+	}
-+
-+	return ret;
-+}
-+
-+static int
-+run_parsers_by_type(struct mtd_info *child, enum mtd_parser_type type)
-+{
-+	struct mtd_partition *parts;
-+	int nr_parts;
-+	int i;
-+
-+	nr_parts = parse_mtd_partitions_by_type(child, type, (const struct mtd_partition **)&parts,
-+						NULL);
-+	if (nr_parts <= 0)
-+		return nr_parts;
-+
-+	if (WARN_ON(!parts))
-+		return 0;
-+
-+	for (i = 0; i < nr_parts; i++) {
-+		/* adjust partition offsets */
-+		parts[i].offset += child->part.offset;
-+
-+		mtd_add_partition(child->parent,
-+				  parts[i].name,
-+				  parts[i].offset,
-+				  parts[i].size);
-+	}
-+
-+	kfree(parts);
-+
-+	return nr_parts;
-+}
-+
-+#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#else
-+#define SPLIT_FIRMWARE_NAME	"unused"
-+#endif
-+
-+static void split_firmware(struct mtd_info *master, struct mtd_info *part)
-+{
-+	run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
-+}
-+
-+static void mtd_partition_split(struct mtd_info *master, struct mtd_info *part)
-+{
-+	static int rootfs_found = 0;
-+
-+	if (rootfs_found)
-+		return;
-+
-+	if (of_find_property(mtd_get_of_node(part), "linux,rootfs", NULL) ||
-+	    !strcmp(part->name, "rootfs")) {
-+		run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
-+
-+		rootfs_found = 1;
-+	}
-+
-+	if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) &&
-+	    !strcmp(part->name, SPLIT_FIRMWARE_NAME) &&
-+	    !of_find_property(mtd_get_of_node(part), "compatible", NULL))
-+		split_firmware(master, part);
-+}
-+
- int mtd_add_partition(struct mtd_info *parent, const char *name,
- 		      long long offset, long long length)
- {
-@@ -275,6 +418,7 @@ int mtd_add_partition(struct mtd_info *p
- 	if (ret)
- 		goto err_remove_part;
- 
-+	mtd_partition_split(parent, child);
- 	mtd_add_partition_attrs(child);
- 
- 	return 0;
-@@ -423,6 +567,7 @@ int add_mtd_partitions(struct mtd_info *
- 			goto err_del_partitions;
- 		}
- 
-+		mtd_partition_split(master, child);
- 		mtd_add_partition_attrs(child);
- 
- 		/* Look for subpartitions */
-@@ -439,31 +584,6 @@ err_del_partitions:
- 	return ret;
- }
- 
--static DEFINE_SPINLOCK(part_parser_lock);
--static LIST_HEAD(part_parsers);
--
--static struct mtd_part_parser *mtd_part_parser_get(const char *name)
--{
--	struct mtd_part_parser *p, *ret = NULL;
--
--	spin_lock(&part_parser_lock);
--
--	list_for_each_entry(p, &part_parsers, list)
--		if (!strcmp(p->name, name) && try_module_get(p->owner)) {
--			ret = p;
--			break;
--		}
--
--	spin_unlock(&part_parser_lock);
--
--	return ret;
--}
--
--static inline void mtd_part_parser_put(const struct mtd_part_parser *p)
--{
--	module_put(p->owner);
--}
--
- /*
-  * Many partition parsers just expected the core to kfree() all their data in
-  * one chunk. Do that by default.
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -75,6 +75,12 @@ struct mtd_part_parser_data {
-  * Functions dealing with the various ways of partitioning the space
-  */
- 
-+enum mtd_parser_type {
-+	MTD_PARSER_TYPE_DEVICE = 0,
-+	MTD_PARSER_TYPE_ROOTFS,
-+	MTD_PARSER_TYPE_FIRMWARE,
-+};
-+
- struct mtd_part_parser {
- 	struct list_head list;
- 	struct module *owner;
-@@ -83,6 +89,7 @@ struct mtd_part_parser {
- 	int (*parse_fn)(struct mtd_info *, const struct mtd_partition **,
- 			struct mtd_part_parser_data *);
- 	void (*cleanup)(const struct mtd_partition *pparts, int nr_parts);
-+	enum mtd_parser_type type;
- };
- 
- /* Container for passing around a set of parsed partitions */
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -9,6 +9,8 @@ mtd-y				:= mtdcore.o mtdsuper.o mtdconc
- 
- obj-y				+= parsers/
- 
-+obj-$(CONFIG_MTD_SPLIT)		+= mtdsplit/
-+
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o
- obj-$(CONFIG_MTD_BLOCK)		+= mtdblock.o
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -606,6 +606,24 @@ static inline void mtd_align_erase_req(s
- 		req->len += mtd->erasesize - mod;
- }
- 
-+static inline uint64_t mtd_roundup_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+	if (mtd_mod_by_eb(sz, mtd) == 0)
-+		return sz;
-+
-+	/* Round up to next erase block */
-+	return (mtd_div_by_eb(sz, mtd) + 1) * mtd->erasesize;
-+}
-+
-+static inline uint64_t mtd_rounddown_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+	if (mtd_mod_by_eb(sz, mtd) == 0)
-+		return sz;
-+
-+	/* Round down to the start of the current erase block */
-+	return (mtd_div_by_eb(sz, mtd)) * mtd->erasesize;
-+}
-+
- static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
- {
- 	if (mtd->writesize_shift)
-@@ -679,6 +697,13 @@ extern struct mtd_info *of_get_mtd_devic
- extern struct mtd_info *get_mtd_device_nm(const char *name);
- extern void put_mtd_device(struct mtd_info *mtd);
- 
-+static inline uint64_t mtdpart_get_offset(const struct mtd_info *mtd)
-+{
-+	if (!mtd_is_partition(mtd))
-+		return 0;
-+
-+	return mtd->part.offset;
-+}
- 
- struct mtd_notifier {
- 	void (*add)(struct mtd_info *mtd);
diff --git a/target/linux/generic/pending-5.10/402-mtd-spi-nor-write-support-for-minor-aligned-partitions.patch b/target/linux/generic/pending-5.10/402-mtd-spi-nor-write-support-for-minor-aligned-partitions.patch
deleted file mode 100644
index c9bb4a14a4fa..000000000000
--- a/target/linux/generic/pending-5.10/402-mtd-spi-nor-write-support-for-minor-aligned-partitions.patch
+++ /dev/null
@@ -1,245 +0,0 @@
-From cd13e2cd28bf7313b6ad6986bb8d63ea98b37a48 Mon Sep 17 00:00:00 2001
-From: John Thomson <git@johnthomson.fastmail.com.au>
-Date: Fri, 25 Dec 2020 18:50:08 +1000
-Subject: [PATCH] mtd: spi-nor: write support for minor aligned partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Do not prevent writing to mtd partitions where a partition boundary sits
-on a minor erasesize boundary.
-This addresses a FIXME that has been present since the start of the
-linux git history:
-/* Doesn't start on a boundary of major erase size */
-/* FIXME: Let it be writable if it is on a boundary of
- * _minor_ erase size though */
-
-Allow a uniform erase region spi-nor device to be configured
-to use the non-uniform erase regions code path for an erase with:
-CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE=y
-
-On supporting hardware (SECT_4K: majority of current SPI-NOR device)
-provide the facility for an erase to use the least number
-of SPI-NOR operations, as well as access to 4K erase without
-requiring CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
-
-Introduce erasesize_minor to the mtd struct,
-the smallest erasesize supported by the device
-
-On existing devices, this is useful where write support is wanted
-for data on a 4K partition, such as some u-boot-env partitions,
-or RouterBoot soft_config, while still netting the performance
-benefits of using 64K sectors
-
-Performance:
-time mtd erase firmware
-OpenWrt 5.10 ramips MT7621 w25q128jv 0xfc0000 partition length
-
-Without this patch
-MTD_SPI_NOR_USE_4K_SECTORS=y	|n
-real    2m 11.66s		|0m 50.86s
-user    0m 0.00s		|0m 0.00s
-sys     1m 56.20s		|0m 50.80s
-
-With this patch
-MTD_SPI_NOR_USE_VARIABLE_ERASE=n|y		|4K_SECTORS=y
-real    0m 51.68s		|0m 50.85s	|2m 12.89s
-user    0m 0.00s		|0m 0.00s	|0m 0.01s
-sys     0m 46.94s		|0m 50.38s	|2m 12.46s
-
-Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
-Signed-off-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org>
-
----
-
-checkpatch does not like the printk(KERN_WARNING
-these should be changed separately beforehand?
-
-Changes v1 -> v2:
-Added mtdcore sysfs for erasesize_minor
-Removed finding minor erasesize for variable erase regions device,
-as untested and no responses regarding it.
-Moved IF_ENABLED for SPINOR variable erase to guard setting
-erasesize_minor in spi-nor/core.c
-Removed setting erasesize to minor where partition boundaries require
-minor erase to be writable
-Simplified minor boundary check by relying on minor being a factor of
-major
-
-Changes RFC -> v1:
-Fix uninitialized variable smatch warning
-Reported-by: kernel test robot <lkp@intel.com>
-Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
----
- drivers/mtd/mtdcore.c       | 10 ++++++++++
- drivers/mtd/mtdpart.c       | 35 +++++++++++++++++++++++++----------
- drivers/mtd/spi-nor/Kconfig | 10 ++++++++++
- drivers/mtd/spi-nor/core.c  | 11 +++++++++--
- include/linux/mtd/mtd.h     |  2 ++
- 5 files changed, 56 insertions(+), 12 deletions(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -164,6 +164,15 @@ static ssize_t mtd_erasesize_show(struct
- }
- static DEVICE_ATTR(erasesize, S_IRUGO, mtd_erasesize_show, NULL);
- 
-+static ssize_t mtd_erasesize_minor_show(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	struct mtd_info *mtd = dev_get_drvdata(dev);
-+
-+	return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->erasesize_minor);
-+}
-+static DEVICE_ATTR(erasesize_minor, S_IRUGO, mtd_erasesize_minor_show, NULL);
-+
- static ssize_t mtd_writesize_show(struct device *dev,
- 		struct device_attribute *attr, char *buf)
- {
-@@ -313,6 +322,7 @@ static struct attribute *mtd_attrs[] = {
- 	&dev_attr_flags.attr,
- 	&dev_attr_size.attr,
- 	&dev_attr_erasesize.attr,
-+	&dev_attr_erasesize_minor.attr,
- 	&dev_attr_writesize.attr,
- 	&dev_attr_subpagesize.attr,
- 	&dev_attr_oobsize.attr,
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -41,6 +41,7 @@ static struct mtd_info *allocate_partiti
- 	struct mtd_info *master = mtd_get_master(parent);
- 	int wr_alignment = (parent->flags & MTD_NO_ERASE) ?
- 			   master->writesize : master->erasesize;
-+	int wr_alignment_minor = 0;
- 	u64 parent_size = mtd_is_partition(parent) ?
- 			  parent->part.size : parent->size;
- 	struct mtd_info *child;
-@@ -165,6 +166,7 @@ static struct mtd_info *allocate_partiti
- 	} else {
- 		/* Single erase size */
- 		child->erasesize = master->erasesize;
-+		child->erasesize_minor = master->erasesize_minor;
- 	}
- 
- 	/*
-@@ -172,26 +174,39 @@ static struct mtd_info *allocate_partiti
- 	 * exposes several regions with different erasesize. Adjust
- 	 * wr_alignment accordingly.
- 	 */
--	if (!(child->flags & MTD_NO_ERASE))
-+	if (!(child->flags & MTD_NO_ERASE)) {
- 		wr_alignment = child->erasesize;
-+		wr_alignment_minor = child->erasesize_minor;
-+	}
- 
- 	tmp = mtd_get_master_ofs(child, 0);
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((child->flags & MTD_WRITEABLE) && remainder) {
--		/* Doesn't start on a boundary of major erase size */
--		/* FIXME: Let it be writable if it is on a boundary of
--		 * _minor_ erase size though */
--		child->flags &= ~MTD_WRITEABLE;
--		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
--			part->name);
-+		if (wr_alignment_minor) {
-+			/* rely on minor being a factor of major erasesize */
-+			tmp = remainder;
-+			remainder = do_div(tmp, wr_alignment_minor);
-+		}
-+		if (remainder) {
-+			child->flags &= ~MTD_WRITEABLE;
-+			printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
-+				part->name);
-+		}
- 	}
- 
- 	tmp = mtd_get_master_ofs(child, 0) + child->part.size;
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((child->flags & MTD_WRITEABLE) && remainder) {
--		child->flags &= ~MTD_WRITEABLE;
--		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
--			part->name);
-+		if (wr_alignment_minor) {
-+			tmp = remainder;
-+			remainder = do_div(tmp, wr_alignment_minor);
-+		}
-+
-+		if (remainder) {
-+			child->flags &= ~MTD_WRITEABLE;
-+			printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
-+				part->name);
-+		}
- 	}
- 
- 	child->size = child->part.size;
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -10,6 +10,16 @@ menuconfig MTD_SPI_NOR
- 
- if MTD_SPI_NOR
- 
-+config MTD_SPI_NOR_USE_VARIABLE_ERASE
-+	bool "Disable uniform_erase to allow use of all hardware supported erasesizes"
-+	depends on !MTD_SPI_NOR_USE_4K_SECTORS
-+	default n
-+	help
-+	  Allow mixed use of all hardware supported erasesizes,
-+	  by forcing spi_nor to use the multiple eraseregions code path.
-+	  For example: A 68K erase will use one 64K erase, and one 4K erase
-+	  on supporting hardware.
-+
- config MTD_SPI_NOR_USE_4K_SECTORS
- 	bool "Use small 4096 B erase sectors"
- 	default y
---- a/drivers/mtd/spi-nor/core.c
-+++ b/drivers/mtd/spi-nor/core.c
-@@ -1084,6 +1084,8 @@ static u8 spi_nor_convert_3to4_erase(u8
- 
- static bool spi_nor_has_uniform_erase(const struct spi_nor *nor)
- {
-+	if (IS_ENABLED(CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE))
-+		return false;
- 	return !!nor->params->erase_map.uniform_erase_type;
- }
- 
-@@ -2580,6 +2582,7 @@ static int spi_nor_select_erase(struct s
- {
- 	struct spi_nor_erase_map *map = &nor->params->erase_map;
- 	const struct spi_nor_erase_type *erase = NULL;
-+	const struct spi_nor_erase_type *erase_minor = NULL;
- 	struct mtd_info *mtd = &nor->mtd;
- 	u32 wanted_size = nor->info->sector_size;
- 	int i;
-@@ -2612,8 +2615,9 @@ static int spi_nor_select_erase(struct s
- 	 */
- 	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
- 		if (map->erase_type[i].size) {
--			erase = &map->erase_type[i];
--			break;
-+			if (!erase)
-+				erase = &map->erase_type[i];
-+			erase_minor = &map->erase_type[i];
- 		}
- 	}
- 
-@@ -2621,6 +2625,9 @@ static int spi_nor_select_erase(struct s
- 		return -EINVAL;
- 
- 	mtd->erasesize = erase->size;
-+	if (IS_ENABLED(CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE) &&
-+			erase_minor && erase_minor->size < erase->size)
-+		mtd->erasesize_minor = erase_minor->size;
- 	return 0;
- }
- 
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -242,6 +242,8 @@ struct mtd_info {
- 	 * information below if they desire
- 	 */
- 	uint32_t erasesize;
-+	/* "Minor" (smallest) erase size supported by the whole device */
-+	uint32_t erasesize_minor;
- 	/* Minimal writable flash unit size. In case of NOR flash it is 1 (even
- 	 * though individual bits can be cleared), in case of NAND flash it is
- 	 * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
diff --git a/target/linux/generic/pending-5.10/410-mtd-parsers-ofpart-fix-parsing-subpartitions.patch b/target/linux/generic/pending-5.10/410-mtd-parsers-ofpart-fix-parsing-subpartitions.patch
deleted file mode 100644
index 353fa9674819..000000000000
--- a/target/linux/generic/pending-5.10/410-mtd-parsers-ofpart-fix-parsing-subpartitions.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 6 May 2021 12:33:58 +0200
-Subject: [PATCH] mtd: parsers: ofpart: fix parsing subpartitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-ofpart was recently patched to not scan random partition nodes as
-subpartitions. That change unfortunately broke scanning valid
-subpartitions like:
-
-partitions {
-	compatible = "fixed-partitions";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	partition@0 {
-		compatible = "fixed-partitions";
-		label = "bootloader";
-		reg = <0x0 0x100000>;
-
-		partition@0 {
-			label = "config";
-			reg = <0x80000 0x80000>;
-		};
-	};
-};
-
-Fix that regression by adding 1 more code path. We actually need 3
-conditional blocks to support 3 possible cases. This change also makes
-code easier to understand & follow.
-
-Reported-by: David Bauer <mail@david-bauer.net>
-Fixes: 2d751203aacf ("mtd: parsers: ofpart: limit parsing of deprecated DT syntax
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/mtd/parsers/ofpart_core.c | 26 ++++++++++++++------------
- 1 file changed, 14 insertions(+), 12 deletions(-)
-
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -57,20 +57,22 @@ static int parse_fixed_partitions(struct
- 	if (!mtd_node)
- 		return 0;
- 
--	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
--	if (!ofpart_node && !master->parent) {
--		/*
--		 * We might get here even when ofpart isn't used at all (e.g.,
--		 * when using another parser), so don't be louder than
--		 * KERN_DEBUG
--		 */
--		pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n",
--			 master->name, mtd_node);
-+	if (!master->parent) { /* Master */
-+		ofpart_node = of_get_child_by_name(mtd_node, "partitions");
-+		if (!ofpart_node) {
-+			/*
-+			 * We might get here even when ofpart isn't used at all (e.g.,
-+			 * when using another parser), so don't be louder than
-+			 * KERN_DEBUG
-+			 */
-+			pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n",
-+				master->name, mtd_node);
-+			ofpart_node = mtd_node;
-+			dedicated = false;
-+		}
-+	} else { /* Partition */
- 		ofpart_node = mtd_node;
--		dedicated = false;
- 	}
--	if (!ofpart_node)
--		return 0;
- 
- 	of_id = of_match_node(parse_ofpart_match_table, ofpart_node);
- 	if (dedicated && !of_id) {
diff --git a/target/linux/generic/pending-5.10/420-mtd-redboot_space.patch b/target/linux/generic/pending-5.10/420-mtd-redboot_space.patch
deleted file mode 100644
index 5be2a2246e37..000000000000
--- a/target/linux/generic/pending-5.10/420-mtd-redboot_space.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: add patch for including unpartitioned space in the rootfs partition for redboot devices (if applicable)
-
-[john@phrozen.org: used by ixp and others]
-
-lede-commit: 394918851f84e4d00fa16eb900e7700e95091f00
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/redboot.c | 19 +++++++++++++------
- 1 file changed, 13 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/parsers/redboot.c
-+++ b/drivers/mtd/parsers/redboot.c
-@@ -280,14 +280,21 @@ static int parse_redboot_partitions(stru
- #endif
- 		names += strlen(names)+1;
- 
--#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
--			i++;
--			parts[i].offset = parts[i-1].size + parts[i-1].offset;
--			parts[i].size = fl->next->img->flash_base - parts[i].offset;
--			parts[i].name = nullname;
--		}
-+			if (!strcmp(parts[i].name, "rootfs")) {
-+				parts[i].size = fl->next->img->flash_base;
-+				parts[i].size &= ~(master->erasesize - 1);
-+				parts[i].size -= parts[i].offset;
-+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-+				nrparts--;
-+			} else {
-+				i++;
-+				parts[i].offset = parts[i-1].size + parts[i-1].offset;
-+				parts[i].size = fl->next->img->flash_base - parts[i].offset;
-+				parts[i].name = nullname;
- #endif
-+			}
-+		}
- 		tmp_fl = fl;
- 		fl = fl->next;
- 		kfree(tmp_fl);
diff --git a/target/linux/generic/pending-5.10/430-mtd-add-myloader-partition-parser.patch b/target/linux/generic/pending-5.10/430-mtd-add-myloader-partition-parser.patch
deleted file mode 100644
index 8a6e6305301d..000000000000
--- a/target/linux/generic/pending-5.10/430-mtd-add-myloader-partition-parser.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: Add myloader partition table parser
-
-[john@phozen.org: shoud be upstreamable]
-
-lede-commit: d8bf22859b51faa09d22c056fe221a45d2f7a3b8
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-[adjust for kernel 5.4, add myloader.c to patch]
-Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -57,6 +57,22 @@ config MTD_CMDLINE_PARTS
- 
- 	  If unsure, say 'N'.
- 
-+config MTD_MYLOADER_PARTS
-+	tristate "MyLoader partition parsing"
-+	depends on ADM5120 || ATH25 || ATH79
-+	help
-+	  MyLoader is a bootloader which allows the user to define partitions
-+	  in flash devices, by putting a table in the second erase block
-+	  on the device, similar to a partition table. This table gives the
-+	  offsets and lengths of the user defined partitions.
-+
-+	  If you need code which can detect and parse these tables, and
-+	  register MTD 'partitions' corresponding to each image detected,
-+	  enable this option.
-+
-+	  You will still need the parsing functions to be called by the driver
-+	  for your particular device. It won't happen automatically.
-+
- config MTD_OF_PARTS
- 	tristate "OpenFirmware (device tree) partitioning parser"
- 	default y
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -3,6 +3,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)		+= ar7part.
- obj-$(CONFIG_MTD_BCM47XX_PARTS)		+= bcm47xxpart.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)		+= bcm63xxpart.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS)		+= cmdlinepart.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS)		+= myloader.o
- obj-$(CONFIG_MTD_OF_PARTS)		+= ofpart.o
- ofpart-y				+= ofpart_core.o
- ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908)	+= ofpart_bcm4908.o
---- /dev/null
-+++ b/drivers/mtd/parsers/myloader.c
-@@ -0,0 +1,181 @@
-+/*
-+ *  Parse MyLoader-style flash partition tables and produce a Linux partition
-+ *  array to match.
-+ *
-+ *  Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This file was based on drivers/mtd/redboot.c
-+ *  Author: Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/vmalloc.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/byteorder/generic.h>
-+#include <linux/myloader.h>
-+
-+#define BLOCK_LEN_MIN		0x10000
-+#define PART_NAME_LEN		32
-+
-+struct part_data {
-+	struct mylo_partition_table	tab;
-+	char names[MYLO_MAX_PARTITIONS][PART_NAME_LEN];
-+};
-+
-+static int myloader_parse_partitions(struct mtd_info *master,
-+				     const struct mtd_partition **pparts,
-+				     struct mtd_part_parser_data *data)
-+{
-+	struct part_data *buf;
-+	struct mylo_partition_table *tab;
-+	struct mylo_partition *part;
-+	struct mtd_partition *mtd_parts;
-+	struct mtd_partition *mtd_part;
-+	int num_parts;
-+	int ret, i;
-+	size_t retlen;
-+	char *names;
-+	unsigned long offset;
-+	unsigned long blocklen;
-+
-+	buf = vmalloc(sizeof(*buf));
-+	if (!buf) {
-+		return -ENOMEM;
-+		goto out;
-+	}
-+	tab = &buf->tab;
-+
-+	blocklen = master->erasesize;
-+	if (blocklen < BLOCK_LEN_MIN)
-+		blocklen = BLOCK_LEN_MIN;
-+
-+	offset = blocklen;
-+
-+	/* Find the partition table */
-+	for (i = 0; i < 4; i++, offset += blocklen) {
-+		printk(KERN_DEBUG "%s: searching for MyLoader partition table"
-+				" at offset 0x%lx\n", master->name, offset);
-+
-+		ret = mtd_read(master, offset, sizeof(*buf), &retlen,
-+			       (void *)buf);
-+		if (ret)
-+			goto out_free_buf;
-+
-+		if (retlen != sizeof(*buf)) {
-+			ret = -EIO;
-+			goto out_free_buf;
-+		}
-+
-+		/* Check for Partition Table magic number */
-+		if (tab->magic == le32_to_cpu(MYLO_MAGIC_PARTITIONS))
-+			break;
-+
-+	}
-+
-+	if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) {
-+		printk(KERN_DEBUG "%s: no MyLoader partition table found\n",
-+			master->name);
-+		ret = 0;
-+		goto out_free_buf;
-+	}
-+
-+	/* The MyLoader and the Partition Table is always present */
-+	num_parts = 2;
-+
-+	/* Detect number of used partitions */
-+	for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
-+		part = &tab->partitions[i];
-+
-+		if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
-+			continue;
-+
-+		num_parts++;
-+	}
-+
-+	mtd_parts = kzalloc((num_parts * sizeof(*mtd_part) +
-+				num_parts * PART_NAME_LEN), GFP_KERNEL);
-+
-+	if (!mtd_parts) {
-+		ret = -ENOMEM;
-+		goto out_free_buf;
-+	}
-+
-+	mtd_part = mtd_parts;
-+	names = (char *)&mtd_parts[num_parts];
-+
-+	strncpy(names, "myloader", PART_NAME_LEN);
-+	mtd_part->name = names;
-+	mtd_part->offset = 0;
-+	mtd_part->size = offset;
-+	mtd_part->mask_flags = MTD_WRITEABLE;
-+	mtd_part++;
-+	names += PART_NAME_LEN;
-+
-+	strncpy(names, "partition_table", PART_NAME_LEN);
-+	mtd_part->name = names;
-+	mtd_part->offset = offset;
-+	mtd_part->size = blocklen;
-+	mtd_part->mask_flags = MTD_WRITEABLE;
-+	mtd_part++;
-+	names += PART_NAME_LEN;
-+
-+	for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
-+		part = &tab->partitions[i];
-+
-+		if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
-+			continue;
-+
-+		if ((buf->names[i][0]) && (buf->names[i][0] != '\xff'))
-+			strncpy(names, buf->names[i], PART_NAME_LEN);
-+		else
-+			snprintf(names, PART_NAME_LEN, "partition%d", i);
-+
-+		mtd_part->offset = le32_to_cpu(part->addr);
-+		mtd_part->size = le32_to_cpu(part->size);
-+		mtd_part->name = names;
-+		mtd_part++;
-+		names += PART_NAME_LEN;
-+	}
-+
-+	*pparts = mtd_parts;
-+	ret = num_parts;
-+
-+ out_free_buf:
-+	vfree(buf);
-+ out:
-+	return ret;
-+}
-+
-+static struct mtd_part_parser myloader_mtd_parser = {
-+	.owner		= THIS_MODULE,
-+	.parse_fn	= myloader_parse_partitions,
-+	.name		= "MyLoader",
-+};
-+
-+static int __init myloader_mtd_parser_init(void)
-+{
-+	register_mtd_parser(&myloader_mtd_parser);
-+
-+	return 0;
-+}
-+
-+static void __exit myloader_mtd_parser_exit(void)
-+{
-+	deregister_mtd_parser(&myloader_mtd_parser);
-+}
-+
-+module_init(myloader_mtd_parser_init);
-+module_exit(myloader_mtd_parser_exit);
-+
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_DESCRIPTION("Parsing code for MyLoader partition tables");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/pending-5.10/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch b/target/linux/generic/pending-5.10/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
deleted file mode 100644
index bcea45d009bb..000000000000
--- a/target/linux/generic/pending-5.10/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: bcm47xxpart: check for bad blocks when calculating offsets
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -25,6 +25,33 @@ struct trx_header {
- 	uint32_t offset[3];
- } __packed;
- 
-+/*
-+ * Calculate real end offset (address) for a given amount of data. It checks
-+ * all blocks skipping bad ones.
-+ */
-+static size_t parser_trx_real_offset(struct mtd_info *mtd, size_t bytes)
-+{
-+	size_t real_offset = 0;
-+
-+	if (mtd_block_isbad(mtd, real_offset))
-+		pr_warn("Base offset shouldn't be at bad block");
-+
-+	while (bytes >= mtd->erasesize) {
-+		bytes -= mtd->erasesize;
-+		real_offset += mtd->erasesize;
-+		while (mtd_block_isbad(mtd, real_offset)) {
-+			real_offset += mtd->erasesize;
-+
-+			if (real_offset >= mtd->size)
-+				return real_offset - mtd->erasesize;
-+		}
-+	}
-+
-+	real_offset += bytes;
-+
-+	return real_offset;
-+}
-+
- static const char *parser_trx_data_part_name(struct mtd_info *master,
- 					     size_t offset)
- {
-@@ -86,21 +113,21 @@ static int parser_trx_parse(struct mtd_i
- 	if (trx.offset[2]) {
- 		part = &parts[curr_part++];
- 		part->name = "loader";
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
- 		i++;
- 	}
- 
- 	if (trx.offset[i]) {
- 		part = &parts[curr_part++];
- 		part->name = "linux";
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
- 		i++;
- 	}
- 
- 	if (trx.offset[i]) {
- 		part = &parts[curr_part++];
--		part->name = parser_trx_data_part_name(mtd, trx.offset[i]);
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
-+		part->name = parser_trx_data_part_name(mtd, part->offset);
- 		i++;
- 	}
- 
diff --git a/target/linux/generic/pending-5.10/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch b/target/linux/generic/pending-5.10/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
deleted file mode 100644
index 852654d924a8..000000000000
--- a/target/linux/generic/pending-5.10/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: mtd: bcm47xxpart: detect T_Meter partition
-
-It can be found on many Netgear devices. It consists of many 0x30 blocks
-starting with 4D 54.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/parsers/bcm47xxpart.c
-+++ b/drivers/mtd/parsers/bcm47xxpart.c
-@@ -35,6 +35,7 @@
- #define NVRAM_HEADER			0x48534C46	/* FLSH */
- #define POT_MAGIC1			0x54544f50	/* POTT */
- #define POT_MAGIC2			0x504f		/* OP */
-+#define T_METER_MAGIC			0x4D540000	/* MT */
- #define ML_MAGIC1			0x39685a42
- #define ML_MAGIC2			0x26594131
- #define TRX_MAGIC			0x30524448
-@@ -178,6 +179,15 @@ static int bcm47xxpart_parse(struct mtd_
- 					     MTD_WRITEABLE);
- 			continue;
- 		}
-+
-+		/* T_Meter */
-+		if ((le32_to_cpu(buf[0x000 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+		    (le32_to_cpu(buf[0x030 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+		    (le32_to_cpu(buf[0x060 / 4]) & 0xFFFF0000) == T_METER_MAGIC) {
-+			bcm47xxpart_add_part(&parts[curr_part++], "T_Meter", offset,
-+					     MTD_WRITEABLE);
-+			continue;
-+		}
- 
- 		/* TRX */
- 		if (buf[0x000 / 4] == TRX_MAGIC) {
diff --git a/target/linux/generic/pending-5.10/435-mtd-add-routerbootpart-parser-config.patch b/target/linux/generic/pending-5.10/435-mtd-add-routerbootpart-parser-config.patch
deleted file mode 100644
index 5c7b57b373d0..000000000000
--- a/target/linux/generic/pending-5.10/435-mtd-add-routerbootpart-parser-config.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 4437e01fb6bca63fccdba5d6c44888b0935885c2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= <hacks@slashdirt.org>
-Date: Tue, 24 Mar 2020 11:45:07 +0100
-Subject: [PATCH] generic: routerboot partition build bits (5.4)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds routerbootpart kernel build bits
-
-Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
----
- drivers/mtd/parsers/Kconfig  | 9 +++++++++
- drivers/mtd/parsers/Makefile | 1 +
- 2 files changed, 10 insertions(+)
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -219,3 +219,12 @@ config MTD_SERCOMM_PARTS
- 	  partition map. This partition table contains real partition
- 	  offsets, which may differ from device to device depending on the
- 	  number and location of bad blocks on NAND.
-+
-+config MTD_ROUTERBOOT_PARTS
-+	tristate "RouterBoot flash partition parser"
-+	depends on MTD && OF
-+	help
-+	 MikroTik RouterBoot is implemented as a multi segment system on the
-+	 flash, some of which are fixed and some of which are located at
-+	 variable offsets. This parser handles both cases via properly
-+	 formatted DTS.
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -15,3 +15,4 @@ obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_
- obj-$(CONFIG_MTD_SERCOMM_PARTS)		+= scpart.o
- obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS)		+= redboot.o
-+obj-$(CONFIG_MTD_ROUTERBOOT_PARTS)		+= routerbootpart.o
diff --git a/target/linux/generic/pending-5.10/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch b/target/linux/generic/pending-5.10/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
deleted file mode 100644
index 2435133fa0b0..000000000000
--- a/target/linux/generic/pending-5.10/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: disable cfi cmdset 0002 erase suspend
-
-on some platforms, erase suspend leads to data corruption and lockups when write
-ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
-rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
-simply disable erase suspend, as it will usually not produce any useful gain on
-the small filesystems used on embedded hardware.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -906,7 +906,7 @@ static int get_chip(struct map_info *map
- 		return 0;
- 
- 	case FL_ERASING:
--		if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
-+		if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
- 		    !(mode == FL_READY || mode == FL_POINT ||
- 		    (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
- 			goto sleep;
diff --git a/target/linux/generic/pending-5.10/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch b/target/linux/generic/pending-5.10/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
deleted file mode 100644
index 059d9673dcb8..000000000000
--- a/target/linux/generic/pending-5.10/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-From: George Kashperko <george@znau.edu.ua>
-Subject: Issue map read after Write Buffer Load command to ensure chip is ready to receive data.
-
-Signed-off-by: George Kashperko <george@znau.edu.ua>
----
- drivers/mtd/chips/cfi_cmdset_0002.c |    1 +
- 1 file changed, 1 insertion(+)
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -2050,6 +2050,7 @@ static int __xipram do_write_buffer(stru
- 
- 	/* Write Buffer Load */
- 	map_write(map, CMD(0x25), cmd_adr);
-+	(void) map_read(map, cmd_adr);
- 
- 	chip->state = FL_WRITING_TO_BUFFER;
- 
diff --git a/target/linux/generic/pending-5.10/465-m25p80-mx-disable-software-protection.patch b/target/linux/generic/pending-5.10/465-m25p80-mx-disable-software-protection.patch
deleted file mode 100644
index f58d5452abe9..000000000000
--- a/target/linux/generic/pending-5.10/465-m25p80-mx-disable-software-protection.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: Disable software protection bits for Macronix flashes.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/macronix.c
-+++ b/drivers/mtd/spi-nor/macronix.c
-@@ -93,6 +93,7 @@ static void macronix_default_init(struct
- {
- 	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
- 	nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode;
-+	nor->flags |= SNOR_F_HAS_LOCK;
- }
- 
- static const struct spi_nor_fixups macronix_fixups = {
diff --git a/target/linux/generic/pending-5.10/476-mtd-spi-nor-add-eon-en25q128.patch b/target/linux/generic/pending-5.10/476-mtd-spi-nor-add-eon-en25q128.patch
deleted file mode 100644
index 9383e48856d9..000000000000
--- a/target/linux/generic/pending-5.10/476-mtd-spi-nor-add-eon-en25q128.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: Piotr Dymacz <pepe2k@gmail.com>
-Subject: kernel/mtd: add support for EON EN25Q128
-
-Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/eon.c
-+++ b/drivers/mtd/spi-nor/eon.c
-@@ -25,6 +25,7 @@ static const struct flash_info eon_parts
- 	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
- 	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
- 	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
-+	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256, SECT_4K) },
- 	{ "en25q80a",   INFO(0x1c3014, 0, 64 * 1024,   16,
- 			     SECT_4K | SPI_NOR_DUAL_READ) },
- 	{ "en25qh16",   INFO(0x1c7015, 0, 64 * 1024,   32,
diff --git a/target/linux/generic/pending-5.10/477-mtd-spi-nor-add-eon-en25qx128a.patch b/target/linux/generic/pending-5.10/477-mtd-spi-nor-add-eon-en25qx128a.patch
deleted file mode 100644
index 3c579e55e34c..000000000000
--- a/target/linux/generic/pending-5.10/477-mtd-spi-nor-add-eon-en25qx128a.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Christian Marangi <ansuelsmth@gmail.com>
-Subject: kernel/mtd: add support for EON EN25QX128A
-
-Add support for EON EN25QX128A with no flags as it does
-support SFDP parsing.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/eon.c
-+++ b/drivers/mtd/spi-nor/eon.c
-@@ -26,6 +26,7 @@ static const struct flash_info eon_parts
- 	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
- 	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
- 	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256, SECT_4K) },
-+	{ "en25qx128a", INFO(0x1c7118, 0, 64 * 1024, 256, 0) },
- 	{ "en25q80a",   INFO(0x1c3014, 0, 64 * 1024,   16,
- 			     SECT_4K | SPI_NOR_DUAL_READ) },
- 	{ "en25qh16",   INFO(0x1c7015, 0, 64 * 1024,   32,
diff --git a/target/linux/generic/pending-5.10/479-mtd-spi-nor-add-xtx-xt25f128b.patch b/target/linux/generic/pending-5.10/479-mtd-spi-nor-add-xtx-xt25f128b.patch
deleted file mode 100644
index 784392cd88cf..000000000000
--- a/target/linux/generic/pending-5.10/479-mtd-spi-nor-add-xtx-xt25f128b.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From patchwork Thu Feb  6 17:19:41 2020
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 1234465
-Date: Thu, 6 Feb 2020 19:19:41 +0200
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-mtd@lists.infradead.org
-Subject: [PATCH v2] mtd: spi-nor: Add support for xt25f128b chip
-Message-ID: <20200206171941.GA2398@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-List-Subscribe: <http://lists.infradead.org/mailman/listinfo/linux-mtd>,
- <mailto:linux-mtd-request@lists.infradead.org?subject=subscribe>
-Cc: Eitan Cohen <eitan@neot-semadar.com>, Piotr Dymacz <pepe2k@gmail.com>,
- Tudor Ambarus <tudor.ambarus@microchip.com>
-Sender: "linux-mtd" <linux-mtd-bounces@lists.infradead.org>
-Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org
-
-Add XT25F128B made by XTX Technology (Shenzhen) Limited.
-This chip supports dual and quad read and uniform 4K-byte erase.
-Verified on Teltonika RUT955 which comes with XT25F128B in recent
-versions of the device.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/spi-nor/spi-nor.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/spi-nor/Makefile
-+++ b/drivers/mtd/spi-nor/Makefile
-@@ -17,6 +17,7 @@ spi-nor-objs			+= sst.o
- spi-nor-objs			+= winbond.o
- spi-nor-objs			+= xilinx.o
- spi-nor-objs			+= xmc.o
-+spi-nor-objs			+= xtx.o
- obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
- 
- obj-$(CONFIG_MTD_SPI_NOR)	+= controllers/
---- /dev/null
-+++ b/drivers/mtd/spi-nor/xtx.c
-@@ -0,0 +1,15 @@
-+// SPDX-License-Identifier: GPL-2.0
-+#include <linux/mtd/spi-nor.h>
-+
-+#include "core.h"
-+
-+static const struct flash_info xtx_parts[] = {
-+	/* XTX Technology (Shenzhen) Limited */
-+	{ "xt25f128b", INFO(0x0B4018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+};
-+
-+const struct spi_nor_manufacturer spi_nor_xtx = {
-+	.name = "xtx",
-+	.parts = xtx_parts,
-+	.nparts = ARRAY_SIZE(xtx_parts),
-+};
---- a/drivers/mtd/spi-nor/core.c
-+++ b/drivers/mtd/spi-nor/core.c
-@@ -2039,6 +2039,7 @@ static const struct spi_nor_manufacturer
- 	&spi_nor_winbond,
- 	&spi_nor_xilinx,
- 	&spi_nor_xmc,
-+	&spi_nor_xtx,
- };
- 
- static const struct flash_info *
---- a/drivers/mtd/spi-nor/core.h
-+++ b/drivers/mtd/spi-nor/core.h
-@@ -398,6 +398,7 @@ extern const struct spi_nor_manufacturer
- extern const struct spi_nor_manufacturer spi_nor_winbond;
- extern const struct spi_nor_manufacturer spi_nor_xilinx;
- extern const struct spi_nor_manufacturer spi_nor_xmc;
-+extern const struct spi_nor_manufacturer spi_nor_xtx;
- 
- int spi_nor_write_enable(struct spi_nor *nor);
- int spi_nor_write_disable(struct spi_nor *nor);
diff --git a/target/linux/generic/pending-5.10/482-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch b/target/linux/generic/pending-5.10/482-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch
deleted file mode 100644
index c32cde559dbe..000000000000
--- a/target/linux/generic/pending-5.10/482-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From d68b4aa22e8c625685bfad642dd7337948dc0ad1 Mon Sep 17 00:00:00 2001
-From: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Date: Mon, 6 Jan 2020 13:07:56 +0100
-Subject: [PATCH] mtd: spi-nor: add support for Gigadevice GD25D05
-
-Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/mtd/spi-nor/gigadevice.c
-+++ b/drivers/mtd/spi-nor/gigadevice.c
-@@ -24,6 +24,9 @@ static struct spi_nor_fixups gd25q256_fi
- };
- 
- static const struct flash_info gigadevice_parts[] = {
-+	{ "gd25q05", INFO(0xc84010, 0, 64 * 1024,  1,
-+			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+			  SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
- 	{ "gd25q16", INFO(0xc84015, 0, 64 * 1024,  32,
- 			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- 			  SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
diff --git a/target/linux/generic/pending-5.10/483-mtd-spi-nor-add-gd25q512.patch b/target/linux/generic/pending-5.10/483-mtd-spi-nor-add-gd25q512.patch
deleted file mode 100644
index b18ba1567178..000000000000
--- a/target/linux/generic/pending-5.10/483-mtd-spi-nor-add-gd25q512.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Roman Yeryomin <roman@advem.lv>
-Subject: mtd/spi-nor/gigadevice: Add gd25q512 SPI NOR flash
-
-Submitted-by: Roman Yeryomin <roman@advem.lv>
-Submitted-by: John Crispin <john@phrozen.org>
----
- drivers/mtd/spi-nor/gigadevice.c              |    3 +++
- 1 files changed, 3 insertions(+)
-
---- a/drivers/mtd/spi-nor/gigadevice.c
-+++ b/drivers/mtd/spi-nor/gigadevice.c
-@@ -53,6 +53,9 @@ static const struct flash_info gigadevic
- 			   SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK |
- 			   SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
- 		.fixups = &gd25q256_fixups },
-+	{ "gd25q512", INFO(0xc84020, 0, 64 * 1024, 1024,
-+			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4B_OPCODES) },
- };
- 
- const struct spi_nor_manufacturer spi_nor_gigadevice = {
diff --git a/target/linux/generic/pending-5.10/483-mtd-spinand-add-support-for-xtx-xt26g0xa.patch b/target/linux/generic/pending-5.10/483-mtd-spinand-add-support-for-xtx-xt26g0xa.patch
deleted file mode 100644
index 3a8ba498bd1a..000000000000
--- a/target/linux/generic/pending-5.10/483-mtd-spinand-add-support-for-xtx-xt26g0xa.patch
+++ /dev/null
@@ -1,178 +0,0 @@
-From a07e31adf2753cad2fd9790db5bfc047c81e8152 Mon Sep 17 00:00:00 2001
-From: Felix Matouschek <felix@matouschek.org>
-Date: Fri, 2 Jul 2021 20:31:23 +0200
-Subject: [PATCH] mtd: spinand: Add support for XTX XT26G0xA
-
-Add support for XTX Technology XT26G01AXXXXX, XTX26G02AXXXXX and
-XTX26G04AXXXXX SPI NAND.
-
-These are 3V, 1G/2G/4Gbit serial SLC NAND flash devices with on-die ECC
-(8bit strength per 512bytes).
-
-Tested on Teltonika RUTX10 flashed with OpenWrt.
-
-Datasheets available at
-http://www.xtxtech.com/download/?AId=225
-https://datasheet.lcsc.com/szlcsc/2005251034_XTX-XT26G01AWSEGA_C558841.pdf
-
-Signed-off-by: Felix Matouschek <felix@matouschek.org>
----
- drivers/mtd/nand/spi/Makefile |   2 +-
- drivers/mtd/nand/spi/core.c   |   1 +
- drivers/mtd/nand/spi/xtx.c    | 122 ++++++++++++++++++++++++++++++++++
- include/linux/mtd/spinand.h   |   1 +
- 4 files changed, 125 insertions(+), 1 deletion(-)
- create mode 100644 drivers/mtd/nand/spi/xtx.c
-
---- a/drivers/mtd/nand/spi/Makefile
-+++ b/drivers/mtd/nand/spi/Makefile
-@@ -1,3 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
--spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
-+spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
- obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
---- a/drivers/mtd/nand/spi/core.c
-+++ b/drivers/mtd/nand/spi/core.c
-@@ -760,6 +760,7 @@ static const struct spinand_manufacturer
- 	&paragon_spinand_manufacturer,
- 	&toshiba_spinand_manufacturer,
- 	&winbond_spinand_manufacturer,
-+	&xtx_spinand_manufacturer,
- };
- 
- static int spinand_manufacturer_match(struct spinand_device *spinand,
---- /dev/null
-+++ b/drivers/mtd/nand/spi/xtx.c
-@@ -0,0 +1,122 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Author:
-+ * Felix Matouschek <felix@matouschek.org>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/kernel.h>
-+#include <linux/mtd/spinand.h>
-+
-+#define SPINAND_MFR_XTX	0x0B
-+
-+#define XT26G0XA_STATUS_ECC_MASK	GENMASK(5, 2)
-+#define XT26G0XA_STATUS_ECC_NO_DETECTED	(0 << 2)
-+#define XT26G0XA_STATUS_ECC_8_CORRECTED	(3 << 4)
-+#define XT26G0XA_STATUS_ECC_UNCOR_ERROR	(2 << 4)
-+
-+static SPINAND_OP_VARIANTS(read_cache_variants,
-+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(write_cache_variants,
-+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
-+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(update_cache_variants,
-+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
-+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
-+
-+static int xt26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section,
-+				   struct mtd_oob_region *region)
-+{
-+	if (section)
-+		return -ERANGE;
-+
-+	region->offset = 48;
-+	region->length = 16;
-+
-+	return 0;
-+}
-+
-+static int xt26g0xa_ooblayout_free(struct mtd_info *mtd, int section,
-+				   struct mtd_oob_region *region)
-+{
-+	if (section)
-+		return -ERANGE;
-+
-+	region->offset = 1;
-+	region->length = 47;
-+
-+	return 0;
-+}
-+
-+static const struct mtd_ooblayout_ops xt26g0xa_ooblayout = {
-+	.ecc = xt26g0xa_ooblayout_ecc,
-+	.free = xt26g0xa_ooblayout_free,
-+};
-+
-+static int xt26g0xa_ecc_get_status(struct spinand_device *spinand,
-+					 u8 status)
-+{
-+	switch (status & XT26G0XA_STATUS_ECC_MASK) {
-+	case XT26G0XA_STATUS_ECC_NO_DETECTED:
-+		return 0;
-+	case XT26G0XA_STATUS_ECC_8_CORRECTED:
-+		return 8;
-+	case XT26G0XA_STATUS_ECC_UNCOR_ERROR:
-+		return -EBADMSG;
-+	default: /* (1 << 2) through (7 << 2) are 1-7 corrected errors */
-+		return (status & XT26G0XA_STATUS_ECC_MASK) >> 2;
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+static const struct spinand_info xtx_spinand_table[] = {
-+	SPINAND_INFO("XT26G01A",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE1),
-+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
-+				     xt26g0xa_ecc_get_status)),
-+	SPINAND_INFO("XT26G02A",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE2),
-+		     NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
-+				     xt26g0xa_ecc_get_status)),
-+	SPINAND_INFO("XT26G04A",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE3),
-+		     NAND_MEMORG(1, 2048, 64, 128, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
-+				     xt26g0xa_ecc_get_status)),
-+};
-+
-+static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = {
-+};
-+
-+const struct spinand_manufacturer xtx_spinand_manufacturer = {
-+	.id = SPINAND_MFR_XTX,
-+	.name = "XTX",
-+	.chips = xtx_spinand_table,
-+	.nchips = ARRAY_SIZE(xtx_spinand_table),
-+	.ops = &xtx_spinand_manuf_ops,
-+};
---- a/include/linux/mtd/spinand.h
-+++ b/include/linux/mtd/spinand.h
-@@ -244,6 +244,7 @@ extern const struct spinand_manufacturer
- extern const struct spinand_manufacturer paragon_spinand_manufacturer;
- extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
- extern const struct spinand_manufacturer winbond_spinand_manufacturer;
-+extern const struct spinand_manufacturer xtx_spinand_manufacturer;
- 
- /**
-  * struct spinand_op_variants - SPI NAND operation variants
diff --git a/target/linux/generic/pending-5.10/484-mtd-spi-nor-add-esmt-f25l16pa.patch b/target/linux/generic/pending-5.10/484-mtd-spi-nor-add-esmt-f25l16pa.patch
deleted file mode 100644
index bf2f1e6aa6ec..000000000000
--- a/target/linux/generic/pending-5.10/484-mtd-spi-nor-add-esmt-f25l16pa.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Jihoon Han <rapid_renard@renard.ga>
-Subject: mtd/spi-nor/esmt: Add support for ESMT F25L16PA(2S) SPI-NOR
-
-This fixes support for Dongwon T&I DW02-412H which uses F25L16PA(2S) flash.
-
-Submitted-by: Jihoon Han <rapid_renard@renard.ga>
-Reviewed-by: Sungbo Eo <mans0n@gorani.run>
-[refresh patches]
-Submitted-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
----
- drivers/mtd/spi-nor/esmt.c                            |  2 ++
- 1 files changed, 2 insertions(+)
-
---- a/drivers/mtd/spi-nor/esmt.c
-+++ b/drivers/mtd/spi-nor/esmt.c
-@@ -10,6 +10,8 @@
- 
- static const struct flash_info esmt_parts[] = {
- 	/* ESMT */
-+	{ "f25l16pa-2s", INFO(0x8c2115, 0, 64 * 1024, 32,
-+			   SECT_4K | SPI_NOR_HAS_LOCK) },
- 	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64,
- 			   SECT_4K | SPI_NOR_HAS_LOCK) },
- 	{ "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64,
diff --git a/target/linux/generic/pending-5.10/485-mtd-spi-nor-add-xmc-xm25qh128c.patch b/target/linux/generic/pending-5.10/485-mtd-spi-nor-add-xmc-xm25qh128c.patch
deleted file mode 100644
index ba654ce4ca84..000000000000
--- a/target/linux/generic/pending-5.10/485-mtd-spi-nor-add-xmc-xm25qh128c.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Langhua Ye <y1248289414@outlook.com>
-Subject: mtd/spi-nor/xmc: add support for XMC XM25QH128C
-
-The XMC XM25QH128C is a 16MB SPI NOR chip. The patch is verified on Ruijie RG-EW3200GX PRO.
-Datasheet available at https://www.xmcwh.com/uploads/435/XM25QH128C.pdf
-
-Submitted-by: Langhua Ye <y1248289414@outlook.com>
----
- drivers/mtd/spi-nor/xmc.c                             | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/mtd/spi-nor/xmc.c
-+++ b/drivers/mtd/spi-nor/xmc.c
-@@ -14,6 +14,8 @@ static const struct flash_info xmc_parts
- 			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256,
- 			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+	{ "XM25QH128C", INFO(0x204018, 0, 64 * 1024, 256,
-+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- };
- 
- const struct spi_nor_manufacturer spi_nor_xmc = {
diff --git a/target/linux/generic/pending-5.10/488-mtd-spi-nor-add-xmc-xm25qh64c.patch b/target/linux/generic/pending-5.10/488-mtd-spi-nor-add-xmc-xm25qh64c.patch
deleted file mode 100644
index 236d1c2755fe..000000000000
--- a/target/linux/generic/pending-5.10/488-mtd-spi-nor-add-xmc-xm25qh64c.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Joe Mullally <jwmullally@gmail.com>
-Subject: mtd/spi-nor/xmc: add support for XMC XM25QH64C
-
-The XMC XM25QH64C is a 8MB SPI NOR chip. The patch is verified on TL-WPA8631P v3.
-Datasheet available at https://www.xmcwh.com/uploads/442/XM25QH64C.pdf
-
-Signed-off-by: Joe Mullally <jwmullally@gmail.com>
----
- drivers/mtd/spi-nor/xmc.c                             | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/mtd/spi-nor/xmc.c
-+++ b/drivers/mtd/spi-nor/xmc.c
-@@ -12,6 +12,8 @@ static const struct flash_info xmc_parts
- 	/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
- 	{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128,
- 			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+	{ "XM25QH64C", INFO(0x204017, 0, 64 * 1024, 128,
-+			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256,
- 			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ "XM25QH128C", INFO(0x204018, 0, 64 * 1024, 256,
diff --git a/target/linux/generic/pending-5.10/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch b/target/linux/generic/pending-5.10/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
deleted file mode 100644
index 36bd2bb589f0..000000000000
--- a/target/linux/generic/pending-5.10/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: auto-attach mtd device named "ubi" or "data" on boot
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/drivers/mtd/ubi/build.c
-+++ b/drivers/mtd/ubi/build.c
-@@ -1201,6 +1201,73 @@ static struct mtd_info * __init open_mtd
- 	return mtd;
- }
- 
-+/*
-+ * This function tries attaching mtd partitions named either "ubi" or "data"
-+ * during boot.
-+ */
-+static void __init ubi_auto_attach(void)
-+{
-+	int err;
-+	struct mtd_info *mtd;
-+	loff_t offset = 0;
-+	size_t len;
-+	char magic[4];
-+
-+	/* try attaching mtd device named "ubi" or "data" */
-+	mtd = open_mtd_device("ubi");
-+	if (IS_ERR(mtd))
-+		mtd = open_mtd_device("data");
-+
-+	if (IS_ERR(mtd))
-+		return;
-+
-+	/* get the first not bad block */
-+	if (mtd_can_have_bb(mtd))
-+		while (mtd_block_isbad(mtd, offset)) {
-+			offset += mtd->erasesize;
-+
-+			if (offset > mtd->size) {
-+				pr_err("UBI error: Failed to find a non-bad "
-+				       "block on mtd%d\n", mtd->index);
-+				goto cleanup;
-+			}
-+		}
-+
-+	/* check if the read from flash was successful */
-+	err = mtd_read(mtd, offset, 4, &len, (void *) magic);
-+	if ((err && !mtd_is_bitflip(err)) || len != 4) {
-+		pr_err("UBI error: unable to read from mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	/* check for a valid ubi magic */
-+	if (strncmp(magic, "UBI#", 4)) {
-+		pr_err("UBI error: no valid UBI magic found inside mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	/* don't auto-add media types where UBI doesn't makes sense */
-+	if (mtd->type != MTD_NANDFLASH &&
-+	    mtd->type != MTD_NORFLASH &&
-+	    mtd->type != MTD_DATAFLASH &&
-+	    mtd->type != MTD_MLCNANDFLASH)
-+		goto cleanup;
-+
-+	mutex_lock(&ubi_devices_mutex);
-+	pr_notice("UBI: auto-attach mtd%d\n", mtd->index);
-+	err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0);
-+	mutex_unlock(&ubi_devices_mutex);
-+	if (err < 0) {
-+		pr_err("UBI error: cannot attach mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	return;
-+
-+cleanup:
-+	put_mtd_device(mtd);
-+}
-+
- static int __init ubi_init(void)
- {
- 	int err, i, k;
-@@ -1284,6 +1351,12 @@ static int __init ubi_init(void)
- 		}
- 	}
- 
-+	/* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd
-+	 * parameter was given */
-+	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    !ubi_is_module() && !mtd_devs)
-+		ubi_auto_attach();
-+
- 	err = ubiblock_init();
- 	if (err) {
- 		pr_err("UBI error: block: cannot initialize, error %d\n", err);
diff --git a/target/linux/generic/pending-5.10/491-ubi-auto-create-ubiblock-device-for-rootfs.patch b/target/linux/generic/pending-5.10/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
deleted file mode 100644
index a2b48fd4fc70..000000000000
--- a/target/linux/generic/pending-5.10/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: auto-create ubiblock device for rootfs
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 42 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -652,6 +652,47 @@ static void __init ubiblock_create_from_
- 	}
- }
- 
-+#define UBIFS_NODE_MAGIC  0x06101831
-+static inline int ubi_vol_is_ubifs(struct ubi_volume_desc *desc)
-+{
-+	int ret;
-+	uint32_t magic_of, magic;
-+	ret = ubi_read(desc, 0, (char *)&magic_of, 0, 4);
-+	if (ret)
-+		return 0;
-+	magic = le32_to_cpu(magic_of);
-+	return magic == UBIFS_NODE_MAGIC;
-+}
-+
-+static void __init ubiblock_create_auto_rootfs(void)
-+{
-+	int ubi_num, ret, is_ubifs;
-+	struct ubi_volume_desc *desc;
-+	struct ubi_volume_info vi;
-+
-+	for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++) {
-+		desc = ubi_open_volume_nm(ubi_num, "rootfs", UBI_READONLY);
-+		if (IS_ERR(desc))
-+			desc = ubi_open_volume_nm(ubi_num, "fit", UBI_READONLY);;
-+
-+		if (IS_ERR(desc))
-+			continue;
-+
-+		ubi_get_volume_info(desc, &vi);
-+		is_ubifs = ubi_vol_is_ubifs(desc);
-+		ubi_close_volume(desc);
-+		if (is_ubifs)
-+			break;
-+
-+		ret = ubiblock_create(&vi);
-+		if (ret)
-+			pr_err("UBI error: block: can't add '%s' volume, err=%d\n",
-+				vi.name, ret);
-+		/* always break if we get here */
-+		break;
-+	}
-+}
-+
- static void ubiblock_remove_all(void)
- {
- 	struct ubiblock *next;
-@@ -684,6 +725,10 @@ int __init ubiblock_init(void)
- 	 */
- 	ubiblock_create_from_param();
- 
-+	/* auto-attach "rootfs" volume if existing and non-ubifs */
-+	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV))
-+		ubiblock_create_auto_rootfs();
-+
- 	/*
- 	 * Block devices are only created upon user requests, so we ignore
- 	 * existing volumes.
diff --git a/target/linux/generic/pending-5.10/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch b/target/linux/generic/pending-5.10/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
deleted file mode 100644
index e3c4dd2ef48c..000000000000
--- a/target/linux/generic/pending-5.10/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: try auto-mounting ubi0:rootfs in init/do_mounts.c
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- init/do_mounts.c | 26 +++++++++++++++++++++++++-
- 1 file changed, 25 insertions(+), 1 deletion(-)
-
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -474,7 +474,30 @@ retry:
- out:
- 	put_page(page);
- }
-- 
-+
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+static int __init mount_ubi_rootfs(void)
-+{
-+	int flags = MS_SILENT;
-+	int err, tried = 0;
-+
-+	while (tried < 2) {
-+		err = do_mount_root("ubi0:rootfs", "ubifs", flags, \
-+					root_mount_data);
-+		switch (err) {
-+			case -EACCES:
-+				flags |= MS_RDONLY;
-+				tried++;
-+				break;
-+			default:
-+				return err;
-+		}
-+	}
-+
-+	return -EINVAL;
-+}
-+#endif
-+
- #ifdef CONFIG_ROOT_NFS
- 
- #define NFSROOT_TIMEOUT_MIN	5
-@@ -567,6 +590,10 @@ void __init mount_root(void)
- 		return;
- 	}
- #endif
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+	if (!mount_ubi_rootfs())
-+		return;
-+#endif
- #ifdef CONFIG_BLOCK
- 	{
- 		int err = create_dev("/dev/root", ROOT_DEV);
diff --git a/target/linux/generic/pending-5.10/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch b/target/linux/generic/pending-5.10/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
deleted file mode 100644
index 2dff46807e27..000000000000
--- a/target/linux/generic/pending-5.10/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: set ROOT_DEV to ubiblock "rootfs" if unset
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -42,6 +42,7 @@
- #include <linux/scatterlist.h>
- #include <linux/idr.h>
- #include <asm/div64.h>
-+#include <linux/root_dev.h>
- 
- #include "ubi-media.h"
- #include "ubi.h"
-@@ -458,6 +459,15 @@ int ubiblock_create(struct ubi_volume_in
- 	dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)",
- 		 dev->ubi_num, dev->vol_id, vi->name);
- 	mutex_unlock(&devices_mutex);
-+
-+	if (!strcmp(vi->name, "rootfs") &&
-+	    IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    ROOT_DEV == 0) {
-+		pr_notice("ubiblock: device ubiblock%d_%d (%s) set to be root filesystem\n",
-+			  dev->ubi_num, dev->vol_id, vi->name);
-+		ROOT_DEV = MKDEV(gd->major, gd->first_minor);
-+	}
-+
- 	return 0;
- 
- out_free_queue:
diff --git a/target/linux/generic/pending-5.10/494-mtd-ubi-add-EOF-marker-support.patch b/target/linux/generic/pending-5.10/494-mtd-ubi-add-EOF-marker-support.patch
deleted file mode 100644
index fc481462212c..000000000000
--- a/target/linux/generic/pending-5.10/494-mtd-ubi-add-EOF-marker-support.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: mtd: add EOF marker support to the UBI layer
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/ubi/attach.c | 25 ++++++++++++++++++++++---
- drivers/mtd/ubi/ubi.h    |  1 +
- 2 files changed, 23 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -926,6 +926,13 @@ static bool vol_ignored(int vol_id)
- #endif
- }
- 
-+static bool ec_hdr_has_eof(struct ubi_ec_hdr *ech)
-+{
-+	return ech->padding1[0] == 'E' &&
-+	       ech->padding1[1] == 'O' &&
-+	       ech->padding1[2] == 'F';
-+}
-+
- /**
-  * scan_peb - scan and process UBI headers of a PEB.
-  * @ubi: UBI device description object
-@@ -958,9 +965,21 @@ static int scan_peb(struct ubi_device *u
- 		return 0;
- 	}
- 
--	err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
--	if (err < 0)
--		return err;
-+	if (!ai->eof_found) {
-+		err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
-+		if (err < 0)
-+			return err;
-+
-+		if (ec_hdr_has_eof(ech)) {
-+			pr_notice("UBI: EOF marker found, PEBs from %d will be erased\n",
-+				pnum);
-+			ai->eof_found = true;
-+		}
-+	}
-+
-+	if (ai->eof_found)
-+		err = UBI_IO_FF_BITFLIPS;
-+
- 	switch (err) {
- 	case 0:
- 		break;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -780,6 +780,7 @@ struct ubi_attach_info {
- 	int mean_ec;
- 	uint64_t ec_sum;
- 	int ec_count;
-+	bool eof_found;
- 	struct kmem_cache *aeb_slab_cache;
- 	struct ubi_ec_hdr *ech;
- 	struct ubi_vid_io_buf *vidb;
diff --git a/target/linux/generic/pending-5.10/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch b/target/linux/generic/pending-5.10/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
deleted file mode 100644
index 01f3b9ec2da0..000000000000
--- a/target/linux/generic/pending-5.10/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 5734c6669fba7ddb5ef491ccff7159d15dba0b59 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Wed, 5 Sep 2018 01:32:51 +0200
-Subject: [PATCH 496/497] dt-bindings: add bindings for mtd-concat devices
-
-Document virtual mtd-concat device bindings.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
----
- .../devicetree/bindings/mtd/mtd-concat.txt    | 36 +++++++++++++++++++
- 1 file changed, 36 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/mtd-concat.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/mtd-concat.txt
-@@ -0,0 +1,36 @@
-+Virtual MTD concat device
-+
-+Requires properties:
-+- devices: list of phandles to mtd nodes that should be concatenated
-+
-+Example:
-+
-+&spi {
-+	flash0: flash@0 {
-+		...
-+	};
-+	flash1: flash@1 {
-+		...
-+	};
-+};
-+
-+flash {
-+	compatible = "mtd-concat";
-+
-+	devices = <&flash0 &flash1>;
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+
-+		partition@0 {
-+			label = "boot";
-+			reg = <0x0000000 0x0040000>;
-+			read-only;
-+		};
-+
-+		partition@40000 {
-+			label = "firmware";
-+			reg = <0x0040000 0x1fc0000>;
-+		};
-+	}
-+}
diff --git a/target/linux/generic/pending-5.10/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch b/target/linux/generic/pending-5.10/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
deleted file mode 100644
index 9b938a43f86c..000000000000
--- a/target/linux/generic/pending-5.10/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
+++ /dev/null
@@ -1,216 +0,0 @@
-From e53f712d8eac71f54399b61038ccf87d2cee99d7 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Sat, 25 Aug 2018 12:35:22 +0200
-Subject: [PATCH 497/497] mtd: mtdconcat: add dt driver for concat devices
-
-Some mtd drivers like physmap variants have support for concatenating
-multiple mtd devices, but there is no generic way to define such a
-concat device from within the device tree.
-
-This is useful for some SoC boards that use multiple flash chips as
-memory banks of a single mtd device, with partitions spanning chip
-borders.
-
-This commit adds a driver for creating virtual mtd-concat devices. They
-must have a compatible = "mtd-concat" line, and define a list of devices
-to concat in the 'devices' property, for example:
-
-flash {
-  compatible = "mtd-concat";
-
-  devices = <&flash0 &flash1>;
-
-  partitions {
-    ...
-  };
-};
-
-The driver is added to the very end of the mtd Makefile to increase the
-likelyhood of all child devices already being loaded at the time of
-probing, preventing unnecessary deferred probes.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
----
- drivers/mtd/Kconfig                 |   2 +
- drivers/mtd/Makefile                |   3 +
- drivers/mtd/composite/Kconfig       |  12 +++
- drivers/mtd/composite/Makefile      |   6 ++
- drivers/mtd/composite/virt_concat.c | 128 ++++++++++++++++++++++++++++
- 5 files changed, 151 insertions(+)
- create mode 100644 drivers/mtd/composite/Kconfig
- create mode 100644 drivers/mtd/composite/Makefile
- create mode 100644 drivers/mtd/composite/virt_concat.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -238,4 +238,6 @@ source "drivers/mtd/ubi/Kconfig"
- 
- source "drivers/mtd/hyperbus/Kconfig"
- 
-+source "drivers/mtd/composite/Kconfig"
-+
- endif # MTD
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -33,3 +33,6 @@ obj-y		+= chips/ lpddr/ maps/ devices/ n
- obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor/
- obj-$(CONFIG_MTD_UBI)		+= ubi/
- obj-$(CONFIG_MTD_HYPERBUS)	+= hyperbus/
-+
-+# Composite drivers must be loaded last
-+obj-y				+= composite/
---- /dev/null
-+++ b/drivers/mtd/composite/Kconfig
-@@ -0,0 +1,12 @@
-+menu "Composite MTD device drivers"
-+	depends on MTD!=n
-+
-+config MTD_VIRT_CONCAT
-+	tristate "Virtual concat MTD device"
-+	help
-+	  This driver allows creation of a virtual MTD concat device, which
-+	  concatenates multiple underlying MTD devices to a single device.
-+	  This is required by some SoC boards where multiple memory banks are
-+	  used as one device with partitions spanning across device boundaries.
-+
-+endmenu
---- /dev/null
-+++ b/drivers/mtd/composite/Makefile
-@@ -0,0 +1,6 @@
-+# SPDX-License-Identifier: GPL-2.0
-+#
-+# linux/drivers/mtd/composite/Makefile
-+#
-+
-+obj-$(CONFIG_MTD_VIRT_CONCAT)   += virt_concat.o
---- /dev/null
-+++ b/drivers/mtd/composite/virt_concat.c
-@@ -0,0 +1,128 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Virtual concat MTD device driver
-+ *
-+ * Copyright (C) 2018 Bernhard Frauendienst
-+ * Author: Bernhard Frauendienst, kernel@nospam.obeliks.de
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/mtd/concat.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/slab.h>
-+
-+/*
-+ * struct of_virt_concat - platform device driver data.
-+ * @cmtd the final mtd_concat device
-+ * @num_devices the number of devices in @devices
-+ * @devices points to an array of devices already loaded
-+ */
-+struct of_virt_concat {
-+	struct mtd_info	*cmtd;
-+	int num_devices;
-+	struct mtd_info	**devices;
-+};
-+
-+static int virt_concat_remove(struct platform_device *pdev)
-+{
-+	struct of_virt_concat *info;
-+	int i;
-+
-+	info = platform_get_drvdata(pdev);
-+	if (!info)
-+		return 0;
-+
-+	// unset data for when this is called after a probe error
-+	platform_set_drvdata(pdev, NULL);
-+
-+	if (info->cmtd) {
-+		mtd_device_unregister(info->cmtd);
-+		mtd_concat_destroy(info->cmtd);
-+	}
-+
-+	if (info->devices) {
-+		for (i = 0; i < info->num_devices; i++)
-+			put_mtd_device(info->devices[i]);
-+	}
-+
-+	return 0;
-+}
-+
-+static int virt_concat_probe(struct platform_device *pdev)
-+{
-+	struct device_node *node = pdev->dev.of_node;
-+	struct of_phandle_iterator it;
-+	struct of_virt_concat *info;
-+	struct mtd_info *mtd;
-+	int err = 0, count;
-+
-+	count = of_count_phandle_with_args(node, "devices", NULL);
-+	if (count <= 0)
-+		return -EINVAL;
-+
-+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-+	if (!info)
-+		return -ENOMEM;
-+	info->devices = devm_kcalloc(&pdev->dev, count,
-+				     sizeof(*(info->devices)), GFP_KERNEL);
-+	if (!info->devices) {
-+		err = -ENOMEM;
-+		goto err_remove;
-+	}
-+
-+	platform_set_drvdata(pdev, info);
-+
-+	of_for_each_phandle(&it, err, node, "devices", NULL, 0) {
-+		mtd = of_get_mtd_device_by_node(it.node);
-+		if (IS_ERR(mtd)) {
-+			of_node_put(it.node);
-+			err = -EPROBE_DEFER;
-+			goto err_remove;
-+		}
-+
-+		info->devices[info->num_devices++] = mtd;
-+	}
-+
-+	info->cmtd = mtd_concat_create(info->devices, info->num_devices,
-+				       dev_name(&pdev->dev));
-+	if (!info->cmtd) {
-+		err = -ENXIO;
-+		goto err_remove;
-+	}
-+
-+	info->cmtd->dev.parent = &pdev->dev;
-+	mtd_set_of_node(info->cmtd, node);
-+	mtd_device_register(info->cmtd, NULL, 0);
-+
-+	return 0;
-+
-+err_remove:
-+	virt_concat_remove(pdev);
-+
-+	return err;
-+}
-+
-+static const struct of_device_id virt_concat_of_match[] = {
-+	{ .compatible = "mtd-concat", },
-+	{ /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, virt_concat_of_match);
-+
-+static struct platform_driver virt_concat_driver = {
-+	.probe = virt_concat_probe,
-+	.remove = virt_concat_remove,
-+	.driver	 = {
-+		.name   = "virt-mtdconcat",
-+		.of_match_table = virt_concat_of_match,
-+	},
-+};
-+
-+module_platform_driver(virt_concat_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Bernhard Frauendienst <kernel@nospam.obeliks.de>");
-+MODULE_DESCRIPTION("Virtual concat MTD device driver");
diff --git a/target/linux/generic/pending-5.10/498-mtd-spi-nor-locking-support-for-MX25L6405D.patch b/target/linux/generic/pending-5.10/498-mtd-spi-nor-locking-support-for-MX25L6405D.patch
deleted file mode 100644
index 62e977c8d171..000000000000
--- a/target/linux/generic/pending-5.10/498-mtd-spi-nor-locking-support-for-MX25L6405D.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 8bf2ce6ea4ee840b70f55a27f80e1cd308051b13 Mon Sep 17 00:00:00 2001
-From: Nick Hainke <vincent@systemli.org>
-Date: Mon, 27 Dec 2021 00:38:13 +0100
-Subject: [PATCH 1/2] mtd: spi-nor: locking support for MX25L6405D
-
-Macronix MX25L6405D supports locking with four block-protection bits.
-Currently, the driver only sets three bits.  If the bootloader does not
-sustain the flash chip in an unlocked state, the flash might be
-non-writeable. Add the corresponding flag to enable locking support with
-four bits in the status register.
-
-Tested on Nanostation M2 XM.
-
-Similar to commit 7ea40b54e83b ("mtd: spi-nor: enable locking support for
-MX25L12805D")
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-Signed-off-by: Nick Hainke <vincent@systemli.org>
----
- drivers/mtd/spi-nor/macronix.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/macronix.c
-+++ b/drivers/mtd/spi-nor/macronix.c
-@@ -42,7 +42,8 @@ static const struct flash_info macronix_
- 	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
- 	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
--	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
-+	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K |
-+			      SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP) },
- 	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
- 	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024,  64,
- 			      SECT_4K | SPI_NOR_DUAL_READ |
diff --git a/target/linux/generic/pending-5.10/499-mtd-spi-nor-disable-16-bit-sr-for-macronix.patch b/target/linux/generic/pending-5.10/499-mtd-spi-nor-disable-16-bit-sr-for-macronix.patch
deleted file mode 100644
index ec14f6341cc2..000000000000
--- a/target/linux/generic/pending-5.10/499-mtd-spi-nor-disable-16-bit-sr-for-macronix.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 245224608b5368c10407da07557e546743d3c489 Mon Sep 17 00:00:00 2001
-From: Nick Hainke <vincent@systemli.org>
-Date: Mon, 27 Dec 2021 09:33:13 +0100
-Subject: [PATCH 2/2] mtd: spi-nor: disable 16-bit-sr for macronix
-
-Macronix flash chips seem to consist of only one status register.
-These chips will not work with the "16-bit Write Status (01h) Command".
-Disable SNOR_F_HAS_16BIT_SR for all Macronix chips.
-
-Tested with MX25L6405D.
-
-Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on
-lock()/unlock()")
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-Signed-off-by: Nick Hainke <vincent@systemli.org>
----
- drivers/mtd/spi-nor/macronix.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/macronix.c
-+++ b/drivers/mtd/spi-nor/macronix.c
-@@ -94,6 +94,7 @@ static void macronix_default_init(struct
- {
- 	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
- 	nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode;
-+	nor->flags &= ~SNOR_F_HAS_16BIT_SR;
- 	nor->flags |= SNOR_F_HAS_LOCK;
- }
- 
diff --git a/target/linux/generic/pending-5.10/500-fs_cdrom_dependencies.patch b/target/linux/generic/pending-5.10/500-fs_cdrom_dependencies.patch
deleted file mode 100644
index 620bf72b4d2c..000000000000
--- a/target/linux/generic/pending-5.10/500-fs_cdrom_dependencies.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fs: Add CDROM dependencies
-
-Submitted-by: Felix Fietkau <nbd@nbd.name>
----
- fs/hfs/Kconfig                                |    1 +
- fs/hfsplus/Kconfig                            |    1 +
- fs/isofs/Kconfig                              |    1 +
- fs/udf/Kconfig                                |    1 +
- 4 files changed, 4 insertions(+)
-
---- a/fs/hfs/Kconfig
-+++ b/fs/hfs/Kconfig
-@@ -2,6 +2,7 @@
- config HFS_FS
- 	tristate "Apple Macintosh file system support"
- 	depends on BLOCK
-+	select CDROM
- 	select NLS
- 	help
- 	  If you say Y here, you will be able to mount Macintosh-formatted
---- a/fs/hfsplus/Kconfig
-+++ b/fs/hfsplus/Kconfig
-@@ -2,6 +2,7 @@
- config HFSPLUS_FS
- 	tristate "Apple Extended HFS file system support"
- 	depends on BLOCK
-+	select CDROM
- 	select NLS
- 	select NLS_UTF8
- 	help
---- a/fs/isofs/Kconfig
-+++ b/fs/isofs/Kconfig
-@@ -1,6 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0-only
- config ISO9660_FS
- 	tristate "ISO 9660 CDROM file system support"
-+	select CDROM
- 	help
- 	  This is the standard file system used on CD-ROMs.  It was previously
- 	  known as "High Sierra File System" and is called "hsfs" on other
---- a/fs/udf/Kconfig
-+++ b/fs/udf/Kconfig
-@@ -1,6 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0-only
- config UDF_FS
- 	tristate "UDF file system support"
-+	select CDROM
- 	select CRC_ITU_T
- 	select NLS
- 	help
diff --git a/target/linux/generic/pending-5.10/530-jffs2_make_lzma_available.patch b/target/linux/generic/pending-5.10/530-jffs2_make_lzma_available.patch
deleted file mode 100644
index 52071ca673cd..000000000000
--- a/target/linux/generic/pending-5.10/530-jffs2_make_lzma_available.patch
+++ /dev/null
@@ -1,4581 +0,0 @@
-From: Alexandros C. Couloumbis <alex@ozo.com>
-Subject: fs: add jffs2/lzma support (not activated by default yet)
-
-lede-commit: c2c88d315fa0e881f8b19da07b62859b915b11b2
-Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
----
- fs/jffs2/Kconfig             |    9 +
- fs/jffs2/Makefile            |    3 +
- fs/jffs2/compr.c             |    6 +
- fs/jffs2/compr.h             |   10 +-
- fs/jffs2/compr_lzma.c        |  128 +++
- fs/jffs2/super.c             |   33 +-
- include/linux/lzma.h         |   62 ++
- include/linux/lzma/LzFind.h  |  115 +++
- include/linux/lzma/LzHash.h  |   54 +
- include/linux/lzma/LzmaDec.h |  231 +++++
- include/linux/lzma/LzmaEnc.h |   80 ++
- include/linux/lzma/Types.h   |  226 +++++
- include/uapi/linux/jffs2.h   |    1 +
- lib/Kconfig                  |    6 +
- lib/Makefile                 |   12 +
- lib/lzma/LzFind.c            |  761 ++++++++++++++
- lib/lzma/LzmaDec.c           |  999 +++++++++++++++++++
- lib/lzma/LzmaEnc.c           | 2271 ++++++++++++++++++++++++++++++++++++++++++
- lib/lzma/Makefile            |    7 +
- 19 files changed, 5008 insertions(+), 6 deletions(-)
- create mode 100644 fs/jffs2/compr_lzma.c
- create mode 100644 include/linux/lzma.h
- create mode 100644 include/linux/lzma/LzFind.h
- create mode 100644 include/linux/lzma/LzHash.h
- create mode 100644 include/linux/lzma/LzmaDec.h
- create mode 100644 include/linux/lzma/LzmaEnc.h
- create mode 100644 include/linux/lzma/Types.h
- create mode 100644 lib/lzma/LzFind.c
- create mode 100644 lib/lzma/LzmaDec.c
- create mode 100644 lib/lzma/LzmaEnc.c
- create mode 100644 lib/lzma/Makefile
-
---- a/fs/jffs2/Kconfig
-+++ b/fs/jffs2/Kconfig
-@@ -136,6 +136,15 @@ config JFFS2_LZO
- 	  This feature was added in July, 2007. Say 'N' if you need
- 	  compatibility with older bootloaders or kernels.
- 
-+config JFFS2_LZMA
-+	bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
-+	select LZMA_COMPRESS
-+	select LZMA_DECOMPRESS
-+	depends on JFFS2_FS
-+	default n
-+	help
-+	  JFFS2 wrapper to the LZMA C SDK
-+
- config JFFS2_RTIME
- 	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- 	depends on JFFS2_FS
---- a/fs/jffs2/Makefile
-+++ b/fs/jffs2/Makefile
-@@ -19,4 +19,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN)	+= compr_rub
- jffs2-$(CONFIG_JFFS2_RTIME)	+= compr_rtime.o
- jffs2-$(CONFIG_JFFS2_ZLIB)	+= compr_zlib.o
- jffs2-$(CONFIG_JFFS2_LZO)	+= compr_lzo.o
-+jffs2-$(CONFIG_JFFS2_LZMA)	+= compr_lzma.o
- jffs2-$(CONFIG_JFFS2_SUMMARY)   += summary.o
-+
-+CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
---- a/fs/jffs2/compr.c
-+++ b/fs/jffs2/compr.c
-@@ -378,6 +378,9 @@ int __init jffs2_compressors_init(void)
- #ifdef CONFIG_JFFS2_LZO
- 	jffs2_lzo_init();
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+	jffs2_lzma_init();
-+#endif
- /* Setting default compression mode */
- #ifdef CONFIG_JFFS2_CMODE_NONE
- 	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-@@ -401,6 +404,9 @@ int __init jffs2_compressors_init(void)
- int jffs2_compressors_exit(void)
- {
- /* Unregistering compressors */
-+#ifdef CONFIG_JFFS2_LZMA
-+	jffs2_lzma_exit();
-+#endif
- #ifdef CONFIG_JFFS2_LZO
- 	jffs2_lzo_exit();
- #endif
---- a/fs/jffs2/compr.h
-+++ b/fs/jffs2/compr.h
-@@ -29,9 +29,9 @@
- #define JFFS2_DYNRUBIN_PRIORITY  20
- #define JFFS2_LZARI_PRIORITY     30
- #define JFFS2_RTIME_PRIORITY     50
--#define JFFS2_ZLIB_PRIORITY      60
--#define JFFS2_LZO_PRIORITY       80
--
-+#define JFFS2_LZMA_PRIORITY      70
-+#define JFFS2_ZLIB_PRIORITY      80
-+#define JFFS2_LZO_PRIORITY       90
- 
- #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
- #define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
-@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void);
- int jffs2_lzo_init(void);
- void jffs2_lzo_exit(void);
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+int jffs2_lzma_init(void);
-+void jffs2_lzma_exit(void);
-+#endif
- 
- #endif /* __JFFS2_COMPR_H__ */
---- /dev/null
-+++ b/fs/jffs2/compr_lzma.c
-@@ -0,0 +1,128 @@
-+/*
-+ * JFFS2 -- Journalling Flash File System, Version 2.
-+ *
-+ * For licensing information, see the file 'LICENCE' in this directory.
-+ *
-+ * JFFS2 wrapper to the LZMA C SDK
-+ *
-+ */
-+
-+#include <linux/lzma.h>
-+#include "compr.h"
-+
-+#ifdef __KERNEL__
-+	static DEFINE_MUTEX(deflate_mutex);
-+#endif
-+
-+CLzmaEncHandle *p;
-+Byte propsEncoded[LZMA_PROPS_SIZE];
-+SizeT propsSize = sizeof(propsEncoded);
-+
-+STATIC void lzma_free_workspace(void)
-+{
-+	LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
-+}
-+
-+STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
-+{
-+	if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
-+	{
-+		PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
-+		return -ENOMEM;
-+	}
-+
-+	if (LzmaEnc_SetProps(p, props) != SZ_OK)
-+	{
-+		lzma_free_workspace();
-+		return -1;
-+	}
-+
-+	if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
-+	{
-+		lzma_free_workspace();
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
-+			      uint32_t *sourcelen, uint32_t *dstlen)
-+{
-+	SizeT compress_size = (SizeT)(*dstlen);
-+	int ret;
-+
-+	#ifdef __KERNEL__
-+		mutex_lock(&deflate_mutex);
-+	#endif
-+
-+	ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
-+		0, NULL, &lzma_alloc, &lzma_alloc);
-+
-+	#ifdef __KERNEL__
-+		mutex_unlock(&deflate_mutex);
-+	#endif
-+
-+	if (ret != SZ_OK)
-+		return -1;
-+
-+	*dstlen = (uint32_t)compress_size;
-+
-+	return 0;
-+}
-+
-+STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
-+				 uint32_t srclen, uint32_t destlen)
-+{
-+	int ret;
-+	SizeT dl = (SizeT)destlen;
-+	SizeT sl = (SizeT)srclen;
-+	ELzmaStatus status;
-+
-+	ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
-+		propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
-+
-+	if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static struct jffs2_compressor jffs2_lzma_comp = {
-+	.priority = JFFS2_LZMA_PRIORITY,
-+	.name = "lzma",
-+	.compr = JFFS2_COMPR_LZMA,
-+	.compress = &jffs2_lzma_compress,
-+	.decompress = &jffs2_lzma_decompress,
-+	.disabled = 0,
-+};
-+
-+int INIT jffs2_lzma_init(void)
-+{
-+	int ret;
-+	CLzmaEncProps props;
-+	LzmaEncProps_Init(&props);
-+
-+	props.dictSize = LZMA_BEST_DICT(0x2000);
-+	props.level = LZMA_BEST_LEVEL;
-+	props.lc = LZMA_BEST_LC;
-+	props.lp = LZMA_BEST_LP;
-+	props.pb = LZMA_BEST_PB;
-+	props.fb = LZMA_BEST_FB;
-+
-+	ret = lzma_alloc_workspace(&props);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = jffs2_register_compressor(&jffs2_lzma_comp);
-+	if (ret)
-+		lzma_free_workspace();
-+
-+	return ret;
-+}
-+
-+void jffs2_lzma_exit(void)
-+{
-+	jffs2_unregister_compressor(&jffs2_lzma_comp);
-+	lzma_free_workspace();
-+}
---- a/fs/jffs2/super.c
-+++ b/fs/jffs2/super.c
-@@ -374,14 +374,41 @@ static int __init init_jffs2_fs(void)
- 	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
- 	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
- 
--	pr_info("version 2.2."
-+	pr_info("version 2.2"
- #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
- 	       " (NAND)"
- #endif
- #ifdef CONFIG_JFFS2_SUMMARY
--	       " (SUMMARY) "
-+	       " (SUMMARY)"
- #endif
--	       " © 2001-2006 Red Hat, Inc.\n");
-+#ifdef CONFIG_JFFS2_ZLIB
-+	       " (ZLIB)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZO
-+	       " (LZO)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZMA
-+	       " (LZMA)"
-+#endif
-+#ifdef CONFIG_JFFS2_RTIME
-+	       " (RTIME)"
-+#endif
-+#ifdef CONFIG_JFFS2_RUBIN
-+	       " (RUBIN)"
-+#endif
-+#ifdef  CONFIG_JFFS2_CMODE_NONE
-+	       " (CMODE_NONE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_PRIORITY
-+	       " (CMODE_PRIORITY)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_SIZE
-+	       " (CMODE_SIZE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
-+	       " (CMODE_FAVOURLZO)"
-+#endif
-+	       " (c) 2001-2006 Red Hat, Inc.\n");
- 
- 	jffs2_inode_cachep = kmem_cache_create("jffs2_i",
- 					     sizeof(struct jffs2_inode_info),
---- /dev/null
-+++ b/include/linux/lzma.h
-@@ -0,0 +1,62 @@
-+#ifndef __LZMA_H__
-+#define __LZMA_H__
-+
-+#ifdef __KERNEL__
-+	#include <linux/kernel.h>
-+	#include <linux/sched.h>
-+	#include <linux/slab.h>
-+	#include <linux/vmalloc.h>
-+	#include <linux/init.h>
-+	#define LZMA_MALLOC vmalloc
-+	#define LZMA_FREE vfree
-+	#define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
-+	#define INIT __init
-+	#define STATIC static
-+#else
-+	#include <stdint.h>
-+	#include <stdlib.h>
-+	#include <stdio.h>
-+	#include <unistd.h>
-+	#include <string.h>
-+	#include <asm/types.h>
-+	#include <errno.h>
-+	#include <linux/jffs2.h>
-+	#ifndef PAGE_SIZE
-+		extern int page_size;
-+		#define PAGE_SIZE page_size
-+	#endif
-+	#define LZMA_MALLOC malloc
-+	#define LZMA_FREE free
-+	#define PRINT_ERROR(msg) fprintf(stderr, msg)
-+	#define INIT
-+	#define STATIC
-+#endif
-+
-+#include "lzma/LzmaDec.h"
-+#include "lzma/LzmaEnc.h"
-+
-+#define LZMA_BEST_LEVEL (9)
-+#define LZMA_BEST_LC    (0)
-+#define LZMA_BEST_LP    (0)
-+#define LZMA_BEST_PB    (0)
-+#define LZMA_BEST_FB  (273)
-+
-+#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
-+
-+static void *p_lzma_malloc(void *p, size_t size)
-+{
-+	if (size == 0)
-+		return NULL;
-+
-+	return LZMA_MALLOC(size);
-+}
-+
-+static void p_lzma_free(void *p, void *address)
-+{
-+	if (address != NULL)
-+		LZMA_FREE(address);
-+}
-+
-+static ISzAlloc lzma_alloc = { .Alloc = p_lzma_malloc, .Free = p_lzma_free };
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzFind.h
-@@ -0,0 +1,98 @@
-+/* LzFind.h -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_FIND_H
-+#define __LZ_FIND_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+typedef UInt32 CLzRef;
-+
-+typedef struct _CMatchFinder
-+{
-+  Byte *buffer;
-+  UInt32 pos;
-+  UInt32 posLimit;
-+  UInt32 streamPos;
-+  UInt32 lenLimit;
-+
-+  UInt32 cyclicBufferPos;
-+  UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
-+
-+  UInt32 matchMaxLen;
-+  CLzRef *hash;
-+  CLzRef *son;
-+  UInt32 hashMask;
-+  UInt32 cutValue;
-+
-+  Byte *bufferBase;
-+  ISeqInStream *stream;
-+  int streamEndWasReached;
-+
-+  UInt32 blockSize;
-+  UInt32 keepSizeBefore;
-+  UInt32 keepSizeAfter;
-+
-+  UInt32 numHashBytes;
-+  int directInput;
-+  size_t directInputRem;
-+  int btMode;
-+  int bigHash;
-+  UInt32 historySize;
-+  UInt32 fixedHashSize;
-+  UInt32 hashSizeSum;
-+  UInt32 numSons;
-+  SRes result;
-+  UInt32 crc[256];
-+} CMatchFinder;
-+
-+#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
-+#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
-+
-+#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
-+
-+void MatchFinder_Construct(CMatchFinder *p);
-+
-+/* Conditions:
-+     historySize <= 3 GB
-+     keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
-+*/
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+    ISzAlloc *alloc);
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
-+
-+/*
-+Conditions:
-+  Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
-+  Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
-+*/
-+
-+typedef void (*Mf_Init_Func)(void *object);
-+typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
-+typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
-+typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
-+typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
-+typedef void (*Mf_Skip_Func)(void *object, UInt32);
-+
-+typedef struct _IMatchFinder
-+{
-+  Mf_Init_Func Init;
-+  Mf_GetIndexByte_Func GetIndexByte;
-+  Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
-+  Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
-+  Mf_GetMatches_Func GetMatches;
-+  Mf_Skip_Func Skip;
-+} IMatchFinder;
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzHash.h
-@@ -0,0 +1,54 @@
-+/* LzHash.h -- HASH functions for LZ algorithms
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_HASH_H
-+#define __LZ_HASH_H
-+
-+#define kHash2Size (1 << 10)
-+#define kHash3Size (1 << 16)
-+#define kHash4Size (1 << 20)
-+
-+#define kFix3HashSize (kHash2Size)
-+#define kFix4HashSize (kHash2Size + kHash3Size)
-+#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
-+
-+#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
-+
-+#define HASH3_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
-+
-+#define HASH4_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
-+
-+#define HASH5_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
-+  hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
-+  hash4Value &= (kHash4Size - 1); }
-+
-+/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
-+#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
-+
-+
-+#define MT_HASH2_CALC \
-+  hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
-+
-+#define MT_HASH3_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
-+
-+#define MT_HASH4_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -0,0 +1,130 @@
-+/* LzmaDec.h -- LZMA Decoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_DEC_H
-+#define __LZMA_DEC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/* #define _LZMA_PROB32 */
-+/* _LZMA_PROB32 can increase the speed on some CPUs,
-+   but memory usage for CLzmaDec::probs will be doubled in that case */
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+
-+/* ---------- LZMA Properties ---------- */
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaProps
-+{
-+  unsigned lc, lp, pb;
-+  UInt32 dicSize;
-+} CLzmaProps;
-+
-+
-+/* ---------- LZMA Decoder state ---------- */
-+
-+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
-+   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
-+
-+#define LZMA_REQUIRED_INPUT_MAX 20
-+
-+typedef struct
-+{
-+  CLzmaProps prop;
-+  CLzmaProb *probs;
-+  Byte *dic;
-+  const Byte *buf;
-+  UInt32 range, code;
-+  SizeT dicPos;
-+  SizeT dicBufSize;
-+  UInt32 processedPos;
-+  UInt32 checkDicSize;
-+  unsigned state;
-+  UInt32 reps[4];
-+  unsigned remainLen;
-+  int needFlush;
-+  int needInitState;
-+  UInt32 numProbs;
-+  unsigned tempBufSize;
-+  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
-+} CLzmaDec;
-+
-+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
-+
-+/* There are two types of LZMA streams:
-+     0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
-+     1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-+
-+typedef enum
-+{
-+  LZMA_FINISH_ANY,   /* finish at any point */
-+  LZMA_FINISH_END    /* block must be finished at the end */
-+} ELzmaFinishMode;
-+
-+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
-+
-+   You must use LZMA_FINISH_END, when you know that current output buffer
-+   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
-+
-+   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
-+   and output value of destLen will be less than output buffer size limit.
-+   You can check status result also.
-+
-+   You can use multiple checks to test data integrity after full decompression:
-+     1) Check Result and "status" variable.
-+     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
-+     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
-+        You must use correct finish mode in that case. */
-+
-+typedef enum
-+{
-+  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
-+  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
-+  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
-+  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
-+  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
-+} ELzmaStatus;
-+
-+/* ELzmaStatus is used only as output value for function call */
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaDecode
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (*destLen).
-+  LZMA_FINISH_ANY - Decode just destLen bytes.
-+  LZMA_FINISH_END - Stream must be finished after (*destLen).
-+
-+Returns:
-+  SZ_OK
-+    status:
-+      LZMA_STATUS_FINISHED_WITH_MARK
-+      LZMA_STATUS_NOT_FINISHED
-+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+  SZ_ERROR_DATA - Data error
-+  SZ_ERROR_MEM  - Memory allocation error
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
-+*/
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+    ELzmaStatus *status, ISzAlloc *alloc);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -0,0 +1,60 @@
-+/*  LzmaEnc.h -- LZMA Encoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_ENC_H
-+#define __LZMA_ENC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaEncProps
-+{
-+  int level;       /*  0 <= level <= 9 */
-+  UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
-+                      (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
-+                       default = (1 << 24) */
-+  int lc;          /* 0 <= lc <= 8, default = 3 */
-+  int lp;          /* 0 <= lp <= 4, default = 0 */
-+  int pb;          /* 0 <= pb <= 4, default = 2 */
-+  int algo;        /* 0 - fast, 1 - normal, default = 1 */
-+  int fb;          /* 5 <= fb <= 273, default = 32 */
-+  int btMode;      /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
-+  int numHashBytes; /* 2, 3 or 4, default = 4 */
-+  UInt32 mc;        /* 1 <= mc <= (1 << 30), default = 32 */
-+  unsigned writeEndMark;  /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
-+  int numThreads;  /* 1 or 2, default = 2 */
-+} CLzmaEncProps;
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p);
-+
-+/* ---------- CLzmaEncHandle Interface ---------- */
-+
-+/* LzmaEnc_* functions can return the following exit codes:
-+Returns:
-+  SZ_OK           - OK
-+  SZ_ERROR_MEM    - Memory allocation error
-+  SZ_ERROR_PARAM  - Incorrect paramater in props
-+  SZ_ERROR_WRITE  - Write callback error.
-+  SZ_ERROR_PROGRESS - some break from progress callback
-+  SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
-+*/
-+
-+typedef void * CLzmaEncHandle;
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/Types.h
-@@ -0,0 +1,226 @@
-+/* Types.h -- Basic types
-+2009-11-23 : Igor Pavlov : Public domain */
-+
-+#ifndef __7Z_TYPES_H
-+#define __7Z_TYPES_H
-+
-+#include <stddef.h>
-+
-+#ifdef _WIN32
-+#include <windows.h>
-+#endif
-+
-+#ifndef EXTERN_C_BEGIN
-+#ifdef __cplusplus
-+#define EXTERN_C_BEGIN extern "C" {
-+#define EXTERN_C_END }
-+#else
-+#define EXTERN_C_BEGIN
-+#define EXTERN_C_END
-+#endif
-+#endif
-+
-+EXTERN_C_BEGIN
-+
-+#define SZ_OK 0
-+
-+#define SZ_ERROR_DATA 1
-+#define SZ_ERROR_MEM 2
-+#define SZ_ERROR_CRC 3
-+#define SZ_ERROR_UNSUPPORTED 4
-+#define SZ_ERROR_PARAM 5
-+#define SZ_ERROR_INPUT_EOF 6
-+#define SZ_ERROR_OUTPUT_EOF 7
-+#define SZ_ERROR_READ 8
-+#define SZ_ERROR_WRITE 9
-+#define SZ_ERROR_PROGRESS 10
-+#define SZ_ERROR_FAIL 11
-+#define SZ_ERROR_THREAD 12
-+
-+#define SZ_ERROR_ARCHIVE 16
-+#define SZ_ERROR_NO_ARCHIVE 17
-+
-+typedef int SRes;
-+
-+#ifdef _WIN32
-+typedef DWORD WRes;
-+#else
-+typedef int WRes;
-+#endif
-+
-+#ifndef RINOK
-+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
-+#endif
-+
-+typedef unsigned char Byte;
-+typedef short Int16;
-+typedef unsigned short UInt16;
-+
-+#ifdef _LZMA_UINT32_IS_ULONG
-+typedef long Int32;
-+typedef unsigned long UInt32;
-+#else
-+typedef int Int32;
-+typedef unsigned int UInt32;
-+#endif
-+
-+#ifdef _SZ_NO_INT_64
-+
-+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
-+   NOTES: Some code will work incorrectly in that case! */
-+
-+typedef long Int64;
-+typedef unsigned long UInt64;
-+
-+#else
-+
-+#if defined(_MSC_VER) || defined(__BORLANDC__)
-+typedef __int64 Int64;
-+typedef unsigned __int64 UInt64;
-+#else
-+typedef long long int Int64;
-+typedef unsigned long long int UInt64;
-+#endif
-+
-+#endif
-+
-+#ifdef _LZMA_NO_SYSTEM_SIZE_T
-+typedef UInt32 SizeT;
-+#else
-+typedef size_t SizeT;
-+#endif
-+
-+typedef int Bool;
-+#define True 1
-+#define False 0
-+
-+
-+#ifdef _WIN32
-+#define MY_STD_CALL __stdcall
-+#else
-+#define MY_STD_CALL
-+#endif
-+
-+#ifdef _MSC_VER
-+
-+#if _MSC_VER >= 1300
-+#define MY_NO_INLINE __declspec(noinline)
-+#else
-+#define MY_NO_INLINE
-+#endif
-+
-+#define MY_CDECL __cdecl
-+#define MY_FAST_CALL __fastcall
-+
-+#else
-+
-+#define MY_CDECL
-+#define MY_FAST_CALL
-+
-+#endif
-+
-+
-+/* The following interfaces use first parameter as pointer to structure */
-+
-+typedef struct
-+{
-+  SRes (*Read)(void *p, void *buf, size_t *size);
-+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+       (output(*size) < input(*size)) is allowed */
-+} ISeqInStream;
-+
-+/* it can return SZ_ERROR_INPUT_EOF */
-+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
-+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
-+
-+typedef struct
-+{
-+  size_t (*Write)(void *p, const void *buf, size_t size);
-+    /* Returns: result - the number of actually written bytes.
-+       (result < size) means error */
-+} ISeqOutStream;
-+
-+typedef enum
-+{
-+  SZ_SEEK_SET = 0,
-+  SZ_SEEK_CUR = 1,
-+  SZ_SEEK_END = 2
-+} ESzSeek;
-+
-+typedef struct
-+{
-+  SRes (*Read)(void *p, void *buf, size_t *size);  /* same as ISeqInStream::Read */
-+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ISeekInStream;
-+
-+typedef struct
-+{
-+  SRes (*Look)(void *p, void **buf, size_t *size);
-+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+       (output(*size) > input(*size)) is not allowed
-+       (output(*size) < input(*size)) is allowed */
-+  SRes (*Skip)(void *p, size_t offset);
-+    /* offset must be <= output(*size) of Look */
-+
-+  SRes (*Read)(void *p, void *buf, size_t *size);
-+    /* reads directly (without buffer). It's same as ISeqInStream::Read */
-+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ILookInStream;
-+
-+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
-+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
-+
-+/* reads via ILookInStream::Read */
-+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
-+
-+#define LookToRead_BUF_SIZE (1 << 14)
-+
-+typedef struct
-+{
-+  ILookInStream s;
-+  ISeekInStream *realStream;
-+  size_t pos;
-+  size_t size;
-+  Byte buf[LookToRead_BUF_SIZE];
-+} CLookToRead;
-+
-+void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
-+void LookToRead_Init(CLookToRead *p);
-+
-+typedef struct
-+{
-+  ISeqInStream s;
-+  ILookInStream *realStream;
-+} CSecToLook;
-+
-+void SecToLook_CreateVTable(CSecToLook *p);
-+
-+typedef struct
-+{
-+  ISeqInStream s;
-+  ILookInStream *realStream;
-+} CSecToRead;
-+
-+void SecToRead_CreateVTable(CSecToRead *p);
-+
-+typedef struct
-+{
-+  SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
-+    /* Returns: result. (result != SZ_OK) means break.
-+       Value (UInt64)(Int64)-1 for size means unknown value. */
-+} ICompressProgress;
-+
-+typedef struct
-+{
-+  void *(*Alloc)(void *p, size_t size);
-+  void (*Free)(void *p, void *address); /* address can be 0 */
-+} ISzAlloc;
-+
-+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
-+#define IAlloc_Free(p, a) (p)->Free((p), a)
-+
-+EXTERN_C_END
-+
-+#endif
---- a/include/uapi/linux/jffs2.h
-+++ b/include/uapi/linux/jffs2.h
-@@ -46,6 +46,7 @@
- #define JFFS2_COMPR_DYNRUBIN	0x05
- #define JFFS2_COMPR_ZLIB	0x06
- #define JFFS2_COMPR_LZO		0x07
-+#define JFFS2_COMPR_LZMA	0x08
- /* Compatibility flags. */
- #define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
- #define JFFS2_NODE_ACCURATE 0x2000
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -320,6 +320,12 @@ config ZSTD_DECOMPRESS
- 
- source "lib/xz/Kconfig"
- 
-+config LZMA_COMPRESS
-+    tristate
-+
-+config LZMA_DECOMPRESS
-+    tristate
-+
- #
- # These all provide a common interface (hence the apparent duplication with
- # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -136,6 +136,16 @@ CFLAGS_kobject.o += -DDEBUG
- CFLAGS_kobject_uevent.o += -DDEBUG
- endif
- 
-+ifdef CONFIG_JFFS2_ZLIB
-+  CONFIG_ZLIB_INFLATE:=y
-+  CONFIG_ZLIB_DEFLATE:=y
-+endif
-+
-+ifdef CONFIG_JFFS2_LZMA
-+  CONFIG_LZMA_DECOMPRESS:=y
-+  CONFIG_LZMA_COMPRESS:=y
-+endif
-+
- obj-$(CONFIG_DEBUG_INFO_REDUCED) += debug_info.o
- CFLAGS_debug_info.o += $(call cc-option, -femit-struct-debug-detailed=any)
- 
-@@ -191,6 +201,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
- obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
- obj-$(CONFIG_XZ_DEC) += xz/
- obj-$(CONFIG_RAID6_PQ) += raid6/
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma/
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
- 
- lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
- lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
---- /dev/null
-+++ b/lib/lzma/LzFind.c
-@@ -0,0 +1,522 @@
-+/* LzFind.c -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+#include "LzFind.h"
-+#include "LzHash.h"
-+
-+#define kEmptyHashValue 0
-+#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
-+#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
-+#define kNormalizeMask (~(kNormalizeStepMin - 1))
-+#define kMaxHistorySize ((UInt32)3 << 30)
-+
-+#define kStartMaxLen 3
-+
-+#if 0
-+#define DIRECT_INPUT	p->directInput
-+#else
-+#define DIRECT_INPUT	1
-+#endif
-+
-+static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  if (!DIRECT_INPUT)
-+  {
-+    alloc->Free(alloc, p->bufferBase);
-+    p->bufferBase = 0;
-+  }
-+}
-+
-+/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
-+
-+static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
-+{
-+  UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
-+  if (DIRECT_INPUT)
-+  {
-+    p->blockSize = blockSize;
-+    return 1;
-+  }
-+  if (p->bufferBase == 0 || p->blockSize != blockSize)
-+  {
-+    LzInWindow_Free(p, alloc);
-+    p->blockSize = blockSize;
-+    p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
-+  }
-+  return (p->bufferBase != 0);
-+}
-+
-+static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+
-+static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+
-+static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+{
-+  p->posLimit -= subValue;
-+  p->pos -= subValue;
-+  p->streamPos -= subValue;
-+}
-+
-+static void MatchFinder_ReadBlock(CMatchFinder *p)
-+{
-+  if (p->streamEndWasReached || p->result != SZ_OK)
-+    return;
-+  if (DIRECT_INPUT)
-+  {
-+    UInt32 curSize = 0xFFFFFFFF - p->streamPos;
-+    if (curSize > p->directInputRem)
-+      curSize = (UInt32)p->directInputRem;
-+    p->directInputRem -= curSize;
-+    p->streamPos += curSize;
-+    if (p->directInputRem == 0)
-+      p->streamEndWasReached = 1;
-+    return;
-+  }
-+  for (;;)
-+  {
-+    Byte *dest = p->buffer + (p->streamPos - p->pos);
-+    size_t size = (p->bufferBase + p->blockSize - dest);
-+    if (size == 0)
-+      return;
-+    p->result = p->stream->Read(p->stream, dest, &size);
-+    if (p->result != SZ_OK)
-+      return;
-+    if (size == 0)
-+    {
-+      p->streamEndWasReached = 1;
-+      return;
-+    }
-+    p->streamPos += (UInt32)size;
-+    if (p->streamPos - p->pos > p->keepSizeAfter)
-+      return;
-+  }
-+}
-+
-+static void MatchFinder_MoveBlock(CMatchFinder *p)
-+{
-+  memmove(p->bufferBase,
-+    p->buffer - p->keepSizeBefore,
-+    (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
-+  p->buffer = p->bufferBase + p->keepSizeBefore;
-+}
-+
-+static int MatchFinder_NeedMove(CMatchFinder *p)
-+{
-+  if (DIRECT_INPUT)
-+    return 0;
-+  /* if (p->streamEndWasReached) return 0; */
-+  return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
-+}
-+
-+static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
-+{
-+  if (MatchFinder_NeedMove(p))
-+    MatchFinder_MoveBlock(p);
-+  MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
-+{
-+  p->cutValue = 32;
-+  p->btMode = 1;
-+  p->numHashBytes = 4;
-+  p->bigHash = 0;
-+}
-+
-+#define kCrcPoly 0xEDB88320
-+
-+void MatchFinder_Construct(CMatchFinder *p)
-+{
-+  UInt32 i;
-+  p->bufferBase = 0;
-+  p->directInput = 0;
-+  p->hash = 0;
-+  MatchFinder_SetDefaultSettings(p);
-+
-+  for (i = 0; i < 256; i++)
-+  {
-+    UInt32 r = i;
-+    int j;
-+    for (j = 0; j < 8; j++)
-+      r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
-+    p->crc[i] = r;
-+  }
-+}
-+
-+static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->hash);
-+  p->hash = 0;
-+}
-+
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  MatchFinder_FreeThisClassMemory(p, alloc);
-+  LzInWindow_Free(p, alloc);
-+}
-+
-+static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
-+{
-+  size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
-+  if (sizeInBytes / sizeof(CLzRef) != num)
-+    return 0;
-+  return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
-+}
-+
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+    ISzAlloc *alloc)
-+{
-+  UInt32 sizeReserv;
-+  if (historySize > kMaxHistorySize)
-+  {
-+    MatchFinder_Free(p, alloc);
-+    return 0;
-+  }
-+  sizeReserv = historySize >> 1;
-+  if (historySize > ((UInt32)2 << 30))
-+    sizeReserv = historySize >> 2;
-+  sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
-+
-+  p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
-+  p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
-+  /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
-+  if (LzInWindow_Create(p, sizeReserv, alloc))
-+  {
-+    UInt32 newCyclicBufferSize = historySize + 1;
-+    UInt32 hs;
-+    p->matchMaxLen = matchMaxLen;
-+    {
-+      p->fixedHashSize = 0;
-+      if (p->numHashBytes == 2)
-+        hs = (1 << 16) - 1;
-+      else
-+      {
-+        hs = historySize - 1;
-+        hs |= (hs >> 1);
-+        hs |= (hs >> 2);
-+        hs |= (hs >> 4);
-+        hs |= (hs >> 8);
-+        hs >>= 1;
-+        hs |= 0xFFFF; /* don't change it! It's required for Deflate */
-+        if (hs > (1 << 24))
-+        {
-+          if (p->numHashBytes == 3)
-+            hs = (1 << 24) - 1;
-+          else
-+            hs >>= 1;
-+        }
-+      }
-+      p->hashMask = hs;
-+      hs++;
-+      if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
-+      if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
-+      if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
-+      hs += p->fixedHashSize;
-+    }
-+
-+    {
-+      UInt32 prevSize = p->hashSizeSum + p->numSons;
-+      UInt32 newSize;
-+      p->historySize = historySize;
-+      p->hashSizeSum = hs;
-+      p->cyclicBufferSize = newCyclicBufferSize;
-+      p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
-+      newSize = p->hashSizeSum + p->numSons;
-+      if (p->hash != 0 && prevSize == newSize)
-+        return 1;
-+      MatchFinder_FreeThisClassMemory(p, alloc);
-+      p->hash = AllocRefs(newSize, alloc);
-+      if (p->hash != 0)
-+      {
-+        p->son = p->hash + p->hashSizeSum;
-+        return 1;
-+      }
-+    }
-+  }
-+  MatchFinder_Free(p, alloc);
-+  return 0;
-+}
-+
-+static void MatchFinder_SetLimits(CMatchFinder *p)
-+{
-+  UInt32 limit = kMaxValForNormalize - p->pos;
-+  UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
-+  if (limit2 < limit)
-+    limit = limit2;
-+  limit2 = p->streamPos - p->pos;
-+  if (limit2 <= p->keepSizeAfter)
-+  {
-+    if (limit2 > 0)
-+      limit2 = 1;
-+  }
-+  else
-+    limit2 -= p->keepSizeAfter;
-+  if (limit2 < limit)
-+    limit = limit2;
-+  {
-+    UInt32 lenLimit = p->streamPos - p->pos;
-+    if (lenLimit > p->matchMaxLen)
-+      lenLimit = p->matchMaxLen;
-+    p->lenLimit = lenLimit;
-+  }
-+  p->posLimit = p->pos + limit;
-+}
-+
-+static void MatchFinder_Init(CMatchFinder *p)
-+{
-+  UInt32 i;
-+  for (i = 0; i < p->hashSizeSum; i++)
-+    p->hash[i] = kEmptyHashValue;
-+  p->cyclicBufferPos = 0;
-+  p->buffer = p->bufferBase;
-+  p->pos = p->streamPos = p->cyclicBufferSize;
-+  p->result = SZ_OK;
-+  p->streamEndWasReached = 0;
-+  MatchFinder_ReadBlock(p);
-+  MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
-+{
-+  return (p->pos - p->historySize - 1) & kNormalizeMask;
-+}
-+
-+static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+{
-+  UInt32 i;
-+  for (i = 0; i < numItems; i++)
-+  {
-+    UInt32 value = items[i];
-+    if (value <= subValue)
-+      value = kEmptyHashValue;
-+    else
-+      value -= subValue;
-+    items[i] = value;
-+  }
-+}
-+
-+static void MatchFinder_Normalize(CMatchFinder *p)
-+{
-+  UInt32 subValue = MatchFinder_GetSubValue(p);
-+  MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
-+  MatchFinder_ReduceOffsets(p, subValue);
-+}
-+
-+static void MatchFinder_CheckLimits(CMatchFinder *p)
-+{
-+  if (p->pos == kMaxValForNormalize)
-+    MatchFinder_Normalize(p);
-+  if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
-+    MatchFinder_CheckAndMoveAndRead(p);
-+  if (p->cyclicBufferPos == p->cyclicBufferSize)
-+    p->cyclicBufferPos = 0;
-+  MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+    UInt32 *distances, UInt32 maxLen)
-+{
-+  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+  UInt32 len0 = 0, len1 = 0;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+    {
-+      *ptr0 = *ptr1 = kEmptyHashValue;
-+      return distances;
-+    }
-+    {
-+      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+      const Byte *pb = cur - delta;
-+      UInt32 len = (len0 < len1 ? len0 : len1);
-+      if (pb[len] == cur[len])
-+      {
-+        if (++len != lenLimit && pb[len] == cur[len])
-+          while (++len != lenLimit)
-+            if (pb[len] != cur[len])
-+              break;
-+        if (maxLen < len)
-+        {
-+          *distances++ = maxLen = len;
-+          *distances++ = delta - 1;
-+          if (len == lenLimit)
-+          {
-+            *ptr1 = pair[0];
-+            *ptr0 = pair[1];
-+            return distances;
-+          }
-+        }
-+      }
-+      if (pb[len] < cur[len])
-+      {
-+        *ptr1 = curMatch;
-+        ptr1 = pair + 1;
-+        curMatch = *ptr1;
-+        len1 = len;
-+      }
-+      else
-+      {
-+        *ptr0 = curMatch;
-+        ptr0 = pair;
-+        curMatch = *ptr0;
-+        len0 = len;
-+      }
-+    }
-+  }
-+}
-+
-+static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
-+{
-+  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+  UInt32 len0 = 0, len1 = 0;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+    {
-+      *ptr0 = *ptr1 = kEmptyHashValue;
-+      return;
-+    }
-+    {
-+      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+      const Byte *pb = cur - delta;
-+      UInt32 len = (len0 < len1 ? len0 : len1);
-+      if (pb[len] == cur[len])
-+      {
-+        while (++len != lenLimit)
-+          if (pb[len] != cur[len])
-+            break;
-+        {
-+          if (len == lenLimit)
-+          {
-+            *ptr1 = pair[0];
-+            *ptr0 = pair[1];
-+            return;
-+          }
-+        }
-+      }
-+      if (pb[len] < cur[len])
-+      {
-+        *ptr1 = curMatch;
-+        ptr1 = pair + 1;
-+        curMatch = *ptr1;
-+        len1 = len;
-+      }
-+      else
-+      {
-+        *ptr0 = curMatch;
-+        ptr0 = pair;
-+        curMatch = *ptr0;
-+        len0 = len;
-+      }
-+    }
-+  }
-+}
-+
-+#define MOVE_POS \
-+  ++p->cyclicBufferPos; \
-+  p->buffer++; \
-+  if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
-+
-+static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
-+
-+#define MOVE_POS_RET MatchFinder_MovePos(p); return offset;
-+
-+#define GET_MATCHES_HEADER2(minLen, ret_op) \
-+  UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
-+  lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-+  cur = p->buffer;
-+
-+#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
-+#define SKIP_HEADER(minLen)        GET_MATCHES_HEADER2(minLen, continue)
-+
-+#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
-+
-+#define GET_MATCHES_FOOTER(offset, maxLen) \
-+  offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
-+  distances + offset, maxLen) - distances); MOVE_POS_RET;
-+
-+#define SKIP_FOOTER \
-+  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MatchFinder_MovePos(p);
-+
-+static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+  GET_MATCHES_HEADER(4)
-+
-+  HASH4_CALC;
-+
-+  delta2 = p->pos - p->hash[                hash2Value];
-+  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+  curMatch = p->hash[kFix4HashSize + hashValue];
-+
-+  p->hash[                hash2Value] =
-+  p->hash[kFix3HashSize + hash3Value] =
-+  p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+  maxLen = 1;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    distances[0] = maxLen = 2;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+  }
-+  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+  {
-+    maxLen = 3;
-+    distances[offset + 1] = delta3 - 1;
-+    offset += 2;
-+    delta2 = delta3;
-+  }
-+  if (offset != 0)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[offset - 2] = maxLen;
-+    if (maxLen == lenLimit)
-+    {
-+      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+      MOVE_POS_RET;
-+    }
-+  }
-+  if (maxLen < 3)
-+    maxLen = 3;
-+  GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value, hash3Value;
-+    SKIP_HEADER(4)
-+    HASH4_CALC;
-+    curMatch = p->hash[kFix4HashSize + hashValue];
-+    p->hash[                hash2Value] =
-+    p->hash[kFix3HashSize + hash3Value] = p->pos;
-+    p->hash[kFix4HashSize + hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
-+{
-+  vTable->Init = (Mf_Init_Func)MatchFinder_Init;
-+  vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
-+  vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
-+  vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
-+  vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+  vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaDec.c
-@@ -0,0 +1,925 @@
-+/* LzmaDec.c -- LZMA Decoder
-+2009-09-20 : Igor Pavlov : Public domain */
-+
-+#include "LzmaDec.h"
-+
-+#include <string.h>
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+
-+#define RC_INIT_SIZE 5
-+
-+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
-+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
-+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
-+  { UPDATE_0(p); i = (i + i); A0; } else \
-+  { UPDATE_1(p); i = (i + i) + 1; A1; }
-+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
-+
-+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
-+#define TREE_DECODE(probs, limit, i) \
-+  { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
-+
-+/* #define _LZMA_SIZE_OPT */
-+
-+#ifdef _LZMA_SIZE_OPT
-+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
-+#else
-+#define TREE_6_DECODE(probs, i) \
-+  { i = 1; \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  i -= 0x40; }
-+#endif
-+
-+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0_CHECK range = bound;
-+#define UPDATE_1_CHECK range -= bound; code -= bound;
-+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
-+  { UPDATE_0_CHECK; i = (i + i); A0; } else \
-+  { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
-+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
-+#define TREE_DECODE_CHECK(probs, limit, i) \
-+  { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
-+
-+
-+#define kNumPosBitsMax 4
-+#define kNumPosStatesMax (1 << kNumPosBitsMax)
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define LenChoice 0
-+#define LenChoice2 (LenChoice + 1)
-+#define LenLow (LenChoice2 + 1)
-+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-+
-+
-+#define kNumStates 12
-+#define kNumLitStates 7
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#define kNumPosSlotBits 6
-+#define kNumLenToPosStates 4
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+
-+#define kMatchMinLen 2
-+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define IsMatch 0
-+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-+#define IsRepG0 (IsRep + kNumStates)
-+#define IsRepG1 (IsRepG0 + kNumStates)
-+#define IsRepG2 (IsRepG1 + kNumStates)
-+#define IsRep0Long (IsRepG2 + kNumStates)
-+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-+#define LenCoder (Align + kAlignTableSize)
-+#define RepLenCoder (LenCoder + kNumLenProbs)
-+#define Literal (RepLenCoder + kNumLenProbs)
-+
-+#define LZMA_BASE_SIZE 1846
-+#define LZMA_LIT_SIZE 768
-+
-+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
-+
-+#if Literal != LZMA_BASE_SIZE
-+StopCompilingDueBUG
-+#endif
-+
-+#define LZMA_DIC_MIN (1 << 12)
-+
-+/* First LZMA-symbol is always decoded.
-+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
-+Out:
-+  Result:
-+    SZ_OK - OK
-+    SZ_ERROR_DATA - Error
-+  p->remainLen:
-+    < kMatchSpecLenStart : normal remain
-+    = kMatchSpecLenStart : finished
-+    = kMatchSpecLenStart + 1 : Flush marker
-+    = kMatchSpecLenStart + 2 : State Init Marker
-+*/
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+  CLzmaProb *probs = p->probs;
-+
-+  unsigned state = p->state;
-+  UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
-+  unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
-+  unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
-+  unsigned lc = p->prop.lc;
-+
-+  Byte *dic = p->dic;
-+  SizeT dicBufSize = p->dicBufSize;
-+  SizeT dicPos = p->dicPos;
-+
-+  UInt32 processedPos = p->processedPos;
-+  UInt32 checkDicSize = p->checkDicSize;
-+  unsigned len = 0;
-+
-+  const Byte *buf = p->buf;
-+  UInt32 range = p->range;
-+  UInt32 code = p->code;
-+
-+  do
-+  {
-+    CLzmaProb *prob;
-+    UInt32 bound;
-+    unsigned ttt;
-+    unsigned posState = processedPos & pbMask;
-+
-+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IF_BIT_0(prob)
-+    {
-+      unsigned symbol;
-+      UPDATE_0(prob);
-+      prob = probs + Literal;
-+      if (checkDicSize != 0 || processedPos != 0)
-+        prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
-+        (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
-+
-+      if (state < kNumLitStates)
-+      {
-+        state -= (state < 4) ? state : 3;
-+        symbol = 1;
-+        do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
-+      }
-+      else
-+      {
-+        unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+        unsigned offs = 0x100;
-+        state -= (state < 10) ? 3 : 6;
-+        symbol = 1;
-+        do
-+        {
-+          unsigned bit;
-+          CLzmaProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & offs);
-+          probLit = prob + offs + bit + symbol;
-+          GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      dic[dicPos++] = (Byte)symbol;
-+      processedPos++;
-+      continue;
-+    }
-+    else
-+    {
-+      UPDATE_1(prob);
-+      prob = probs + IsRep + state;
-+      IF_BIT_0(prob)
-+      {
-+        UPDATE_0(prob);
-+        state += kNumStates;
-+        prob = probs + LenCoder;
-+      }
-+      else
-+      {
-+        UPDATE_1(prob);
-+        if (checkDicSize == 0 && processedPos == 0)
-+          return SZ_ERROR_DATA;
-+        prob = probs + IsRepG0 + state;
-+        IF_BIT_0(prob)
-+        {
-+          UPDATE_0(prob);
-+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IF_BIT_0(prob)
-+          {
-+            UPDATE_0(prob);
-+            dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+            dicPos++;
-+            processedPos++;
-+            state = state < kNumLitStates ? 9 : 11;
-+            continue;
-+          }
-+          UPDATE_1(prob);
-+        }
-+        else
-+        {
-+          UInt32 distance;
-+          UPDATE_1(prob);
-+          prob = probs + IsRepG1 + state;
-+          IF_BIT_0(prob)
-+          {
-+            UPDATE_0(prob);
-+            distance = rep1;
-+          }
-+          else
-+          {
-+            UPDATE_1(prob);
-+            prob = probs + IsRepG2 + state;
-+            IF_BIT_0(prob)
-+            {
-+              UPDATE_0(prob);
-+              distance = rep2;
-+            }
-+            else
-+            {
-+              UPDATE_1(prob);
-+              distance = rep3;
-+              rep3 = rep2;
-+            }
-+            rep2 = rep1;
-+          }
-+          rep1 = rep0;
-+          rep0 = distance;
-+        }
-+        state = state < kNumLitStates ? 8 : 11;
-+        prob = probs + RepLenCoder;
-+      }
-+      {
-+        unsigned limit, offset;
-+        CLzmaProb *probLen = prob + LenChoice;
-+        IF_BIT_0(probLen)
-+        {
-+          UPDATE_0(probLen);
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          limit = (1 << kLenNumLowBits);
-+        }
-+        else
-+        {
-+          UPDATE_1(probLen);
-+          probLen = prob + LenChoice2;
-+          IF_BIT_0(probLen)
-+          {
-+            UPDATE_0(probLen);
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            limit = (1 << kLenNumMidBits);
-+          }
-+          else
-+          {
-+            UPDATE_1(probLen);
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            limit = (1 << kLenNumHighBits);
-+          }
-+        }
-+        TREE_DECODE(probLen, limit, len);
-+        len += offset;
-+      }
-+
-+      if (state >= kNumStates)
-+      {
-+        UInt32 distance;
-+        prob = probs + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
-+        TREE_6_DECODE(prob, distance);
-+        if (distance >= kStartPosModelIndex)
-+        {
-+          unsigned posSlot = (unsigned)distance;
-+          int numDirectBits = (int)(((distance >> 1) - 1));
-+          distance = (2 | (distance & 1));
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            distance <<= numDirectBits;
-+            prob = probs + SpecPos + distance - posSlot - 1;
-+            {
-+              UInt32 mask = 1;
-+              unsigned i = 1;
-+              do
-+              {
-+                GET_BIT2(prob + i, i, ; , distance |= mask);
-+                mask <<= 1;
-+              }
-+              while (--numDirectBits != 0);
-+            }
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              NORMALIZE
-+              range >>= 1;
-+
-+              {
-+                UInt32 t;
-+                code -= range;
-+                t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
-+                distance = (distance << 1) + (t + 1);
-+                code += range & t;
-+              }
-+              /*
-+              distance <<= 1;
-+              if (code >= range)
-+              {
-+                code -= range;
-+                distance |= 1;
-+              }
-+              */
-+            }
-+            while (--numDirectBits != 0);
-+            prob = probs + Align;
-+            distance <<= kNumAlignBits;
-+            {
-+              unsigned i = 1;
-+              GET_BIT2(prob + i, i, ; , distance |= 1);
-+              GET_BIT2(prob + i, i, ; , distance |= 2);
-+              GET_BIT2(prob + i, i, ; , distance |= 4);
-+              GET_BIT2(prob + i, i, ; , distance |= 8);
-+            }
-+            if (distance == (UInt32)0xFFFFFFFF)
-+            {
-+              len += kMatchSpecLenStart;
-+              state -= kNumStates;
-+              break;
-+            }
-+          }
-+        }
-+        rep3 = rep2;
-+        rep2 = rep1;
-+        rep1 = rep0;
-+        rep0 = distance + 1;
-+        if (checkDicSize == 0)
-+        {
-+          if (distance >= processedPos)
-+            return SZ_ERROR_DATA;
-+        }
-+        else if (distance >= checkDicSize)
-+          return SZ_ERROR_DATA;
-+        state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
-+      }
-+
-+      len += kMatchMinLen;
-+
-+      if (limit == dicPos)
-+        return SZ_ERROR_DATA;
-+      {
-+        SizeT rem = limit - dicPos;
-+        unsigned curLen = ((rem < len) ? (unsigned)rem : len);
-+        SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
-+
-+        processedPos += curLen;
-+
-+        len -= curLen;
-+        if (pos + curLen <= dicBufSize)
-+        {
-+          Byte *dest = dic + dicPos;
-+          ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
-+          const Byte *lim = dest + curLen;
-+          dicPos += curLen;
-+          do
-+            *(dest) = (Byte)*(dest + src);
-+          while (++dest != lim);
-+        }
-+        else
-+        {
-+          do
-+          {
-+            dic[dicPos++] = dic[pos];
-+            if (++pos == dicBufSize)
-+              pos = 0;
-+          }
-+          while (--curLen != 0);
-+        }
-+      }
-+    }
-+  }
-+  while (dicPos < limit && buf < bufLimit);
-+  NORMALIZE;
-+  p->buf = buf;
-+  p->range = range;
-+  p->code = code;
-+  p->remainLen = len;
-+  p->dicPos = dicPos;
-+  p->processedPos = processedPos;
-+  p->reps[0] = rep0;
-+  p->reps[1] = rep1;
-+  p->reps[2] = rep2;
-+  p->reps[3] = rep3;
-+  p->state = state;
-+
-+  return SZ_OK;
-+}
-+
-+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
-+{
-+  if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
-+  {
-+    Byte *dic = p->dic;
-+    SizeT dicPos = p->dicPos;
-+    SizeT dicBufSize = p->dicBufSize;
-+    unsigned len = p->remainLen;
-+    UInt32 rep0 = p->reps[0];
-+    if (limit - dicPos < len)
-+      len = (unsigned)(limit - dicPos);
-+
-+    if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
-+      p->checkDicSize = p->prop.dicSize;
-+
-+    p->processedPos += len;
-+    p->remainLen -= len;
-+    while (len-- != 0)
-+    {
-+      dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+      dicPos++;
-+    }
-+    p->dicPos = dicPos;
-+  }
-+}
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+  do
-+  {
-+    SizeT limit2 = limit;
-+    if (p->checkDicSize == 0)
-+    {
-+      UInt32 rem = p->prop.dicSize - p->processedPos;
-+      if (limit - p->dicPos > rem)
-+        limit2 = p->dicPos + rem;
-+    }
-+    RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
-+    if (p->processedPos >= p->prop.dicSize)
-+      p->checkDicSize = p->prop.dicSize;
-+    LzmaDec_WriteRem(p, limit);
-+  }
-+  while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
-+
-+  if (p->remainLen > kMatchSpecLenStart)
-+  {
-+    p->remainLen = kMatchSpecLenStart;
-+  }
-+  return 0;
-+}
-+
-+typedef enum
-+{
-+  DUMMY_ERROR, /* unexpected end of input stream */
-+  DUMMY_LIT,
-+  DUMMY_MATCH,
-+  DUMMY_REP
-+} ELzmaDummy;
-+
-+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
-+{
-+  UInt32 range = p->range;
-+  UInt32 code = p->code;
-+  const Byte *bufLimit = buf + inSize;
-+  CLzmaProb *probs = p->probs;
-+  unsigned state = p->state;
-+  ELzmaDummy res;
-+
-+  {
-+    CLzmaProb *prob;
-+    UInt32 bound;
-+    unsigned ttt;
-+    unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
-+
-+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IF_BIT_0_CHECK(prob)
-+    {
-+      UPDATE_0_CHECK
-+
-+      /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
-+
-+      prob = probs + Literal;
-+      if (p->checkDicSize != 0 || p->processedPos != 0)
-+        prob += (LZMA_LIT_SIZE *
-+          ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
-+          (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
-+
-+      if (state < kNumLitStates)
-+      {
-+        unsigned symbol = 1;
-+        do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
-+      }
-+      else
-+      {
-+        unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
-+            ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
-+        unsigned offs = 0x100;
-+        unsigned symbol = 1;
-+        do
-+        {
-+          unsigned bit;
-+          CLzmaProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & offs);
-+          probLit = prob + offs + bit + symbol;
-+          GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      res = DUMMY_LIT;
-+    }
-+    else
-+    {
-+      unsigned len;
-+      UPDATE_1_CHECK;
-+
-+      prob = probs + IsRep + state;
-+      IF_BIT_0_CHECK(prob)
-+      {
-+        UPDATE_0_CHECK;
-+        state = 0;
-+        prob = probs + LenCoder;
-+        res = DUMMY_MATCH;
-+      }
-+      else
-+      {
-+        UPDATE_1_CHECK;
-+        res = DUMMY_REP;
-+        prob = probs + IsRepG0 + state;
-+        IF_BIT_0_CHECK(prob)
-+        {
-+          UPDATE_0_CHECK;
-+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IF_BIT_0_CHECK(prob)
-+          {
-+            UPDATE_0_CHECK;
-+            NORMALIZE_CHECK;
-+            return DUMMY_REP;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+          }
-+        }
-+        else
-+        {
-+          UPDATE_1_CHECK;
-+          prob = probs + IsRepG1 + state;
-+          IF_BIT_0_CHECK(prob)
-+          {
-+            UPDATE_0_CHECK;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+            prob = probs + IsRepG2 + state;
-+            IF_BIT_0_CHECK(prob)
-+            {
-+              UPDATE_0_CHECK;
-+            }
-+            else
-+            {
-+              UPDATE_1_CHECK;
-+            }
-+          }
-+        }
-+        state = kNumStates;
-+        prob = probs + RepLenCoder;
-+      }
-+      {
-+        unsigned limit, offset;
-+        CLzmaProb *probLen = prob + LenChoice;
-+        IF_BIT_0_CHECK(probLen)
-+        {
-+          UPDATE_0_CHECK;
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          limit = 1 << kLenNumLowBits;
-+        }
-+        else
-+        {
-+          UPDATE_1_CHECK;
-+          probLen = prob + LenChoice2;
-+          IF_BIT_0_CHECK(probLen)
-+          {
-+            UPDATE_0_CHECK;
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            limit = 1 << kLenNumMidBits;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            limit = 1 << kLenNumHighBits;
-+          }
-+        }
-+        TREE_DECODE_CHECK(probLen, limit, len);
-+        len += offset;
-+      }
-+
-+      if (state < 4)
-+      {
-+        unsigned posSlot;
-+        prob = probs + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
-+            kNumPosSlotBits);
-+        TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          int numDirectBits = ((posSlot >> 1) - 1);
-+
-+          /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
-+
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              NORMALIZE_CHECK
-+              range >>= 1;
-+              code -= range & (((code - range) >> 31) - 1);
-+              /* if (code >= range) code -= range; */
-+            }
-+            while (--numDirectBits != 0);
-+            prob = probs + Align;
-+            numDirectBits = kNumAlignBits;
-+          }
-+          {
-+            unsigned i = 1;
-+            do
-+            {
-+              GET_BIT_CHECK(prob + i, i);
-+            }
-+            while (--numDirectBits != 0);
-+          }
-+        }
-+      }
-+    }
-+  }
-+  NORMALIZE_CHECK;
-+  return res;
-+}
-+
-+
-+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
-+{
-+  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
-+  p->range = 0xFFFFFFFF;
-+  p->needFlush = 0;
-+}
-+
-+static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+{
-+  p->needFlush = 1;
-+  p->remainLen = 0;
-+  p->tempBufSize = 0;
-+
-+  if (initDic)
-+  {
-+    p->processedPos = 0;
-+    p->checkDicSize = 0;
-+    p->needInitState = 1;
-+  }
-+  if (initState)
-+    p->needInitState = 1;
-+}
-+
-+static void LzmaDec_Init(CLzmaDec *p)
-+{
-+  p->dicPos = 0;
-+  LzmaDec_InitDicAndState(p, True, True);
-+}
-+
-+static void LzmaDec_InitStateReal(CLzmaDec *p)
-+{
-+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
-+  UInt32 i;
-+  CLzmaProb *probs = p->probs;
-+  for (i = 0; i < numProbs; i++)
-+    probs[i] = kBitModelTotal >> 1;
-+  p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
-+  p->state = 0;
-+  p->needInitState = 0;
-+}
-+
-+static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+    ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+  SizeT inSize = *srcLen;
-+  (*srcLen) = 0;
-+  LzmaDec_WriteRem(p, dicLimit);
-+
-+  *status = LZMA_STATUS_NOT_SPECIFIED;
-+
-+  while (p->remainLen != kMatchSpecLenStart)
-+  {
-+      int checkEndMarkNow;
-+
-+      if (p->needFlush != 0)
-+      {
-+        for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
-+          p->tempBuf[p->tempBufSize++] = *src++;
-+        if (p->tempBufSize < RC_INIT_SIZE)
-+        {
-+          *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+          return SZ_OK;
-+        }
-+        if (p->tempBuf[0] != 0)
-+          return SZ_ERROR_DATA;
-+
-+        LzmaDec_InitRc(p, p->tempBuf);
-+        p->tempBufSize = 0;
-+      }
-+
-+      checkEndMarkNow = 0;
-+      if (p->dicPos >= dicLimit)
-+      {
-+        if (p->remainLen == 0 && p->code == 0)
-+        {
-+          *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
-+          return SZ_OK;
-+        }
-+        if (finishMode == LZMA_FINISH_ANY)
-+        {
-+          *status = LZMA_STATUS_NOT_FINISHED;
-+          return SZ_OK;
-+        }
-+        if (p->remainLen != 0)
-+        {
-+          *status = LZMA_STATUS_NOT_FINISHED;
-+          return SZ_ERROR_DATA;
-+        }
-+        checkEndMarkNow = 1;
-+      }
-+
-+      if (p->needInitState)
-+        LzmaDec_InitStateReal(p);
-+
-+      if (p->tempBufSize == 0)
-+      {
-+        SizeT processed;
-+        const Byte *bufLimit;
-+        if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+        {
-+          int dummyRes = LzmaDec_TryDummy(p, src, inSize);
-+          if (dummyRes == DUMMY_ERROR)
-+          {
-+            memcpy(p->tempBuf, src, inSize);
-+            p->tempBufSize = (unsigned)inSize;
-+            (*srcLen) += inSize;
-+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+            return SZ_OK;
-+          }
-+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+          {
-+            *status = LZMA_STATUS_NOT_FINISHED;
-+            return SZ_ERROR_DATA;
-+          }
-+          bufLimit = src;
-+        }
-+        else
-+          bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
-+        p->buf = src;
-+        if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
-+          return SZ_ERROR_DATA;
-+        processed = (SizeT)(p->buf - src);
-+        (*srcLen) += processed;
-+        src += processed;
-+        inSize -= processed;
-+      }
-+      else
-+      {
-+        unsigned rem = p->tempBufSize, lookAhead = 0;
-+        while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
-+          p->tempBuf[rem++] = src[lookAhead++];
-+        p->tempBufSize = rem;
-+        if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+        {
-+          int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
-+          if (dummyRes == DUMMY_ERROR)
-+          {
-+            (*srcLen) += lookAhead;
-+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+            return SZ_OK;
-+          }
-+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+          {
-+            *status = LZMA_STATUS_NOT_FINISHED;
-+            return SZ_ERROR_DATA;
-+          }
-+        }
-+        p->buf = p->tempBuf;
-+        if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
-+          return SZ_ERROR_DATA;
-+        lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
-+        (*srcLen) += lookAhead;
-+        src += lookAhead;
-+        inSize -= lookAhead;
-+        p->tempBufSize = 0;
-+      }
-+  }
-+  if (p->code == 0)
-+    *status = LZMA_STATUS_FINISHED_WITH_MARK;
-+  return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
-+}
-+
-+static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->probs);
-+  p->probs = 0;
-+}
-+
-+static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+{
-+  UInt32 dicSize;
-+  Byte d;
-+
-+  if (size < LZMA_PROPS_SIZE)
-+    return SZ_ERROR_UNSUPPORTED;
-+  else
-+    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
-+
-+  if (dicSize < LZMA_DIC_MIN)
-+    dicSize = LZMA_DIC_MIN;
-+  p->dicSize = dicSize;
-+
-+  d = data[0];
-+  if (d >= (9 * 5 * 5))
-+    return SZ_ERROR_UNSUPPORTED;
-+
-+  p->lc = d % 9;
-+  d /= 9;
-+  p->pb = d / 5;
-+  p->lp = d % 5;
-+
-+  return SZ_OK;
-+}
-+
-+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
-+{
-+  UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
-+  if (p->probs == 0 || numProbs != p->numProbs)
-+  {
-+    LzmaDec_FreeProbs(p, alloc);
-+    p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
-+    p->numProbs = numProbs;
-+    if (p->probs == 0)
-+      return SZ_ERROR_MEM;
-+  }
-+  return SZ_OK;
-+}
-+
-+static SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+  CLzmaProps propNew;
-+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+  p->prop = propNew;
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+    ELzmaStatus *status, ISzAlloc *alloc)
-+{
-+  CLzmaDec p;
-+  SRes res;
-+  SizeT inSize = *srcLen;
-+  SizeT outSize = *destLen;
-+  *srcLen = *destLen = 0;
-+  if (inSize < RC_INIT_SIZE)
-+    return SZ_ERROR_INPUT_EOF;
-+
-+  LzmaDec_Construct(&p);
-+  res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
-+  if (res != 0)
-+    return res;
-+  p.dic = dest;
-+  p.dicBufSize = outSize;
-+
-+  LzmaDec_Init(&p);
-+
-+  *srcLen = inSize;
-+  res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
-+
-+  if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
-+    res = SZ_ERROR_INPUT_EOF;
-+
-+  (*destLen) = p.dicPos;
-+  LzmaDec_FreeProbs(&p, alloc);
-+  return res;
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaEnc.c
-@@ -0,0 +1,2123 @@
-+/* LzmaEnc.c -- LZMA Encoder
-+2009-11-24 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+/* #define SHOW_STAT */
-+/* #define SHOW_STAT2 */
-+
-+#if defined(SHOW_STAT) || defined(SHOW_STAT2)
-+#include <stdio.h>
-+#endif
-+
-+#include "LzmaEnc.h"
-+
-+/* disable MT */
-+#define _7ZIP_ST
-+
-+#include "LzFind.h"
-+#ifndef _7ZIP_ST
-+#include "LzFindMt.h"
-+#endif
-+
-+#ifdef SHOW_STAT
-+static int ttt = 0;
-+#endif
-+
-+#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
-+
-+#define kBlockSize (9 << 10)
-+#define kUnpackBlockSize (1 << 18)
-+#define kMatchArraySize (1 << 21)
-+#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
-+
-+#define kNumMaxDirectBits (31)
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+#define kProbInitValue (kBitModelTotal >> 1)
-+
-+#define kNumMoveReducingBits 4
-+#define kNumBitPriceShiftBits 4
-+#define kBitPrice (1 << kNumBitPriceShiftBits)
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p)
-+{
-+  p->level = 5;
-+  p->dictSize = p->mc = 0;
-+  p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
-+  p->writeEndMark = 0;
-+}
-+
-+static void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+{
-+  int level = p->level;
-+  if (level < 0) level = 5;
-+  p->level = level;
-+  if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
-+  if (p->lc < 0) p->lc = 3;
-+  if (p->lp < 0) p->lp = 0;
-+  if (p->pb < 0) p->pb = 2;
-+  if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
-+  if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
-+  if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
-+  if (p->numHashBytes < 0) p->numHashBytes = 4;
-+  if (p->mc == 0)  p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
-+  if (p->numThreads < 0)
-+    p->numThreads =
-+      #ifndef _7ZIP_ST
-+      ((p->btMode && p->algo) ? 2 : 1);
-+      #else
-+      1;
-+      #endif
-+}
-+
-+static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+{
-+  CLzmaEncProps props = *props2;
-+  LzmaEncProps_Normalize(&props);
-+  return props.dictSize;
-+}
-+
-+/* #define LZMA_LOG_BSR */
-+/* Define it for Intel's CPU */
-+
-+
-+#ifdef LZMA_LOG_BSR
-+
-+#define kDicLogSizeMaxCompress 30
-+
-+#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
-+
-+static UInt32 GetPosSlot1(UInt32 pos)
-+{
-+  UInt32 res;
-+  BSR2_RET(pos, res);
-+  return res;
-+}
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
-+
-+#else
-+
-+#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
-+#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
-+
-+static void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+{
-+  int c = 2, slotFast;
-+  g_FastPos[0] = 0;
-+  g_FastPos[1] = 1;
-+
-+  for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
-+  {
-+    UInt32 k = (1 << ((slotFast >> 1) - 1));
-+    UInt32 j;
-+    for (j = 0; j < k; j++, c++)
-+      g_FastPos[c] = (Byte)slotFast;
-+  }
-+}
-+
-+#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
-+  (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
-+  res = p->g_FastPos[pos >> i] + (i * 2); }
-+/*
-+#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
-+  p->g_FastPos[pos >> 6] + 12 : \
-+  p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
-+*/
-+
-+#define GetPosSlot1(pos) p->g_FastPos[pos]
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
-+
-+#endif
-+
-+
-+#define LZMA_NUM_REPS 4
-+
-+typedef unsigned CState;
-+
-+typedef struct
-+{
-+  UInt32 price;
-+
-+  CState state;
-+  int prev1IsChar;
-+  int prev2;
-+
-+  UInt32 posPrev2;
-+  UInt32 backPrev2;
-+
-+  UInt32 posPrev;
-+  UInt32 backPrev;
-+  UInt32 backs[LZMA_NUM_REPS];
-+} COptimal;
-+
-+#define kNumOpts (1 << 12)
-+
-+#define kNumLenToPosStates 4
-+#define kNumPosSlotBits 6
-+#define kDicLogSizeMin 0
-+#define kDicLogSizeMax 32
-+#define kDistTableSizeMax (kDicLogSizeMax * 2)
-+
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+#define kAlignMask (kAlignTableSize - 1)
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
-+
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+#define LZMA_PB_MAX 4
-+#define LZMA_LC_MAX 8
-+#define LZMA_LP_MAX 4
-+
-+#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
-+
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define LZMA_MATCH_LEN_MIN 2
-+#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
-+
-+#define kNumStates 12
-+
-+typedef struct
-+{
-+  CLzmaProb choice;
-+  CLzmaProb choice2;
-+  CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
-+  CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
-+  CLzmaProb high[kLenNumHighSymbols];
-+} CLenEnc;
-+
-+typedef struct
-+{
-+  CLenEnc p;
-+  UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
-+  UInt32 tableSize;
-+  UInt32 counters[LZMA_NUM_PB_STATES_MAX];
-+} CLenPriceEnc;
-+
-+typedef struct
-+{
-+  UInt32 range;
-+  Byte cache;
-+  UInt64 low;
-+  UInt64 cacheSize;
-+  Byte *buf;
-+  Byte *bufLim;
-+  Byte *bufBase;
-+  ISeqOutStream *outStream;
-+  UInt64 processed;
-+  SRes res;
-+} CRangeEnc;
-+
-+typedef struct
-+{
-+  CLzmaProb *litProbs;
-+
-+  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+  CLzmaProb isRep[kNumStates];
-+  CLzmaProb isRepG0[kNumStates];
-+  CLzmaProb isRepG1[kNumStates];
-+  CLzmaProb isRepG2[kNumStates];
-+  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+
-+  CLenPriceEnc lenEnc;
-+  CLenPriceEnc repLenEnc;
-+
-+  UInt32 reps[LZMA_NUM_REPS];
-+  UInt32 state;
-+} CSaveState;
-+
-+typedef struct
-+{
-+  IMatchFinder matchFinder;
-+  void *matchFinderObj;
-+
-+  #ifndef _7ZIP_ST
-+  Bool mtMode;
-+  CMatchFinderMt matchFinderMt;
-+  #endif
-+
-+  CMatchFinder matchFinderBase;
-+
-+  #ifndef _7ZIP_ST
-+  Byte pad[128];
-+  #endif
-+
-+  UInt32 optimumEndIndex;
-+  UInt32 optimumCurrentIndex;
-+
-+  UInt32 longestMatchLength;
-+  UInt32 numPairs;
-+  UInt32 numAvail;
-+  COptimal opt[kNumOpts];
-+
-+  #ifndef LZMA_LOG_BSR
-+  Byte g_FastPos[1 << kNumLogBits];
-+  #endif
-+
-+  UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
-+  UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
-+  UInt32 numFastBytes;
-+  UInt32 additionalOffset;
-+  UInt32 reps[LZMA_NUM_REPS];
-+  UInt32 state;
-+
-+  UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
-+  UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
-+  UInt32 alignPrices[kAlignTableSize];
-+  UInt32 alignPriceCount;
-+
-+  UInt32 distTableSize;
-+
-+  unsigned lc, lp, pb;
-+  unsigned lpMask, pbMask;
-+
-+  CLzmaProb *litProbs;
-+
-+  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+  CLzmaProb isRep[kNumStates];
-+  CLzmaProb isRepG0[kNumStates];
-+  CLzmaProb isRepG1[kNumStates];
-+  CLzmaProb isRepG2[kNumStates];
-+  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+
-+  CLenPriceEnc lenEnc;
-+  CLenPriceEnc repLenEnc;
-+
-+  unsigned lclp;
-+
-+  Bool fastMode;
-+
-+  CRangeEnc rc;
-+
-+  Bool writeEndMark;
-+  UInt64 nowPos64;
-+  UInt32 matchPriceCount;
-+  Bool finished;
-+  Bool multiThread;
-+
-+  SRes result;
-+  UInt32 dictSize;
-+  UInt32 matchFinderCycles;
-+
-+  int needInit;
-+
-+  CSaveState saveState;
-+} CLzmaEnc;
-+
-+SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  CLzmaEncProps props = *props2;
-+  LzmaEncProps_Normalize(&props);
-+
-+  if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
-+      props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
-+    return SZ_ERROR_PARAM;
-+  p->dictSize = props.dictSize;
-+  p->matchFinderCycles = props.mc;
-+  {
-+    unsigned fb = props.fb;
-+    if (fb < 5)
-+      fb = 5;
-+    if (fb > LZMA_MATCH_LEN_MAX)
-+      fb = LZMA_MATCH_LEN_MAX;
-+    p->numFastBytes = fb;
-+  }
-+  p->lc = props.lc;
-+  p->lp = props.lp;
-+  p->pb = props.pb;
-+  p->fastMode = (props.algo == 0);
-+  p->matchFinderBase.btMode = props.btMode;
-+  {
-+    UInt32 numHashBytes = 4;
-+    if (props.btMode)
-+    {
-+      if (props.numHashBytes < 2)
-+        numHashBytes = 2;
-+      else if (props.numHashBytes < 4)
-+        numHashBytes = props.numHashBytes;
-+    }
-+    p->matchFinderBase.numHashBytes = numHashBytes;
-+  }
-+
-+  p->matchFinderBase.cutValue = props.mc;
-+
-+  p->writeEndMark = props.writeEndMark;
-+
-+  #ifndef _7ZIP_ST
-+  /*
-+  if (newMultiThread != _multiThread)
-+  {
-+    ReleaseMatchFinder();
-+    _multiThread = newMultiThread;
-+  }
-+  */
-+  p->multiThread = (props.numThreads > 1);
-+  #endif
-+
-+  return SZ_OK;
-+}
-+
-+static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4,  5,  6,   4, 5};
-+static const int kMatchNextStates[kNumStates]   = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
-+static const int kRepNextStates[kNumStates]     = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
-+static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
-+
-+#define IsCharState(s) ((s) < 7)
-+
-+#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
-+
-+#define kInfinityPrice (1 << 30)
-+
-+static void RangeEnc_Construct(CRangeEnc *p)
-+{
-+  p->outStream = 0;
-+  p->bufBase = 0;
-+}
-+
-+#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
-+
-+#define RC_BUF_SIZE (1 << 16)
-+static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+  if (p->bufBase == 0)
-+  {
-+    p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
-+    if (p->bufBase == 0)
-+      return 0;
-+    p->bufLim = p->bufBase + RC_BUF_SIZE;
-+  }
-+  return 1;
-+}
-+
-+static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->bufBase);
-+  p->bufBase = 0;
-+}
-+
-+static void RangeEnc_Init(CRangeEnc *p)
-+{
-+  /* Stream.Init(); */
-+  p->low = 0;
-+  p->range = 0xFFFFFFFF;
-+  p->cacheSize = 1;
-+  p->cache = 0;
-+
-+  p->buf = p->bufBase;
-+
-+  p->processed = 0;
-+  p->res = SZ_OK;
-+}
-+
-+static void RangeEnc_FlushStream(CRangeEnc *p)
-+{
-+  size_t num;
-+  if (p->res != SZ_OK)
-+    return;
-+  num = p->buf - p->bufBase;
-+  if (num != p->outStream->Write(p->outStream, p->bufBase, num))
-+    p->res = SZ_ERROR_WRITE;
-+  p->processed += num;
-+  p->buf = p->bufBase;
-+}
-+
-+static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
-+{
-+  if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
-+  {
-+    Byte temp = p->cache;
-+    do
-+    {
-+      Byte *buf = p->buf;
-+      *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
-+      p->buf = buf;
-+      if (buf == p->bufLim)
-+        RangeEnc_FlushStream(p);
-+      temp = 0xFF;
-+    }
-+    while (--p->cacheSize != 0);
-+    p->cache = (Byte)((UInt32)p->low >> 24);
-+  }
-+  p->cacheSize++;
-+  p->low = (UInt32)p->low << 8;
-+}
-+
-+static void RangeEnc_FlushData(CRangeEnc *p)
-+{
-+  int i;
-+  for (i = 0; i < 5; i++)
-+    RangeEnc_ShiftLow(p);
-+}
-+
-+static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
-+{
-+  do
-+  {
-+    p->range >>= 1;
-+    p->low += p->range & (0 - ((value >> --numBits) & 1));
-+    if (p->range < kTopValue)
-+    {
-+      p->range <<= 8;
-+      RangeEnc_ShiftLow(p);
-+    }
-+  }
-+  while (numBits != 0);
-+}
-+
-+static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
-+{
-+  UInt32 ttt = *prob;
-+  UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
-+  if (symbol == 0)
-+  {
-+    p->range = newBound;
-+    ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
-+  }
-+  else
-+  {
-+    p->low += newBound;
-+    p->range -= newBound;
-+    ttt -= ttt >> kNumMoveBits;
-+  }
-+  *prob = (CLzmaProb)ttt;
-+  if (p->range < kTopValue)
-+  {
-+    p->range <<= 8;
-+    RangeEnc_ShiftLow(p);
-+  }
-+}
-+
-+static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
-+{
-+  symbol |= 0x100;
-+  do
-+  {
-+    RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
-+    symbol <<= 1;
-+  }
-+  while (symbol < 0x10000);
-+}
-+
-+static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
-+{
-+  UInt32 offs = 0x100;
-+  symbol |= 0x100;
-+  do
-+  {
-+    matchByte <<= 1;
-+    RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
-+    symbol <<= 1;
-+    offs &= ~(matchByte ^ symbol);
-+  }
-+  while (symbol < 0x10000);
-+}
-+
-+static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+{
-+  UInt32 i;
-+  for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-+  {
-+    const int kCyclesBits = kNumBitPriceShiftBits;
-+    UInt32 w = i;
-+    UInt32 bitCount = 0;
-+    int j;
-+    for (j = 0; j < kCyclesBits; j++)
-+    {
-+      w = w * w;
-+      bitCount <<= 1;
-+      while (w >= ((UInt32)1 << 16))
-+      {
-+        w >>= 1;
-+        bitCount++;
-+      }
-+    }
-+    ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
-+  }
-+}
-+
-+
-+#define GET_PRICE(prob, symbol) \
-+  p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICEa(prob, symbol) \
-+  ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  symbol |= 0x100;
-+  do
-+  {
-+    price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
-+    symbol <<= 1;
-+  }
-+  while (symbol < 0x10000);
-+  return price;
-+}
-+
-+static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  UInt32 offs = 0x100;
-+  symbol |= 0x100;
-+  do
-+  {
-+    matchByte <<= 1;
-+    price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
-+    symbol <<= 1;
-+    offs &= ~(matchByte ^ symbol);
-+  }
-+  while (symbol < 0x10000);
-+  return price;
-+}
-+
-+
-+static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+  UInt32 m = 1;
-+  int i;
-+  for (i = numBitLevels; i != 0;)
-+  {
-+    UInt32 bit;
-+    i--;
-+    bit = (symbol >> i) & 1;
-+    RangeEnc_EncodeBit(rc, probs + m, bit);
-+    m = (m << 1) | bit;
-+  }
-+}
-+
-+static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+  UInt32 m = 1;
-+  int i;
-+  for (i = 0; i < numBitLevels; i++)
-+  {
-+    UInt32 bit = symbol & 1;
-+    RangeEnc_EncodeBit(rc, probs + m, bit);
-+    m = (m << 1) | bit;
-+    symbol >>= 1;
-+  }
-+}
-+
-+static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  symbol |= (1 << numBitLevels);
-+  while (symbol != 1)
-+  {
-+    price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
-+    symbol >>= 1;
-+  }
-+  return price;
-+}
-+
-+static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  UInt32 m = 1;
-+  int i;
-+  for (i = numBitLevels; i != 0; i--)
-+  {
-+    UInt32 bit = symbol & 1;
-+    symbol >>= 1;
-+    price += GET_PRICEa(probs[m], bit);
-+    m = (m << 1) | bit;
-+  }
-+  return price;
-+}
-+
-+
-+static void LenEnc_Init(CLenEnc *p)
-+{
-+  unsigned i;
-+  p->choice = p->choice2 = kProbInitValue;
-+  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
-+    p->low[i] = kProbInitValue;
-+  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
-+    p->mid[i] = kProbInitValue;
-+  for (i = 0; i < kLenNumHighSymbols; i++)
-+    p->high[i] = kProbInitValue;
-+}
-+
-+static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
-+{
-+  if (symbol < kLenNumLowSymbols)
-+  {
-+    RangeEnc_EncodeBit(rc, &p->choice, 0);
-+    RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
-+  }
-+  else
-+  {
-+    RangeEnc_EncodeBit(rc, &p->choice, 1);
-+    if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
-+    {
-+      RangeEnc_EncodeBit(rc, &p->choice2, 0);
-+      RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
-+    }
-+    else
-+    {
-+      RangeEnc_EncodeBit(rc, &p->choice2, 1);
-+      RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
-+    }
-+  }
-+}
-+
-+static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
-+{
-+  UInt32 a0 = GET_PRICE_0a(p->choice);
-+  UInt32 a1 = GET_PRICE_1a(p->choice);
-+  UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
-+  UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
-+  UInt32 i = 0;
-+  for (i = 0; i < kLenNumLowSymbols; i++)
-+  {
-+    if (i >= numSymbols)
-+      return;
-+    prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
-+  }
-+  for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
-+  {
-+    if (i >= numSymbols)
-+      return;
-+    prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
-+  }
-+  for (; i < numSymbols; i++)
-+    prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
-+}
-+
-+static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
-+{
-+  LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
-+  p->counters[posState] = p->tableSize;
-+}
-+
-+static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
-+{
-+  UInt32 posState;
-+  for (posState = 0; posState < numPosStates; posState++)
-+    LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
-+{
-+  LenEnc_Encode(&p->p, rc, symbol, posState);
-+  if (updatePrice)
-+    if (--p->counters[posState] == 0)
-+      LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+
-+
-+
-+static void MovePos(CLzmaEnc *p, UInt32 num)
-+{
-+  #ifdef SHOW_STAT
-+  ttt += num;
-+  printf("\n MovePos %d", num);
-+  #endif
-+  if (num != 0)
-+  {
-+    p->additionalOffset += num;
-+    p->matchFinder.Skip(p->matchFinderObj, num);
-+  }
-+}
-+
-+static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
-+{
-+  UInt32 lenRes = 0, numPairs;
-+  p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+  numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
-+  #ifdef SHOW_STAT
-+  printf("\n i = %d numPairs = %d    ", ttt, numPairs / 2);
-+  ttt++;
-+  {
-+    UInt32 i;
-+    for (i = 0; i < numPairs; i += 2)
-+      printf("%2d %6d   | ", p->matches[i], p->matches[i + 1]);
-+  }
-+  #endif
-+  if (numPairs > 0)
-+  {
-+    lenRes = p->matches[numPairs - 2];
-+    if (lenRes == p->numFastBytes)
-+    {
-+      const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+      UInt32 distance = p->matches[numPairs - 1] + 1;
-+      UInt32 numAvail = p->numAvail;
-+      if (numAvail > LZMA_MATCH_LEN_MAX)
-+        numAvail = LZMA_MATCH_LEN_MAX;
-+      {
-+        const Byte *pby2 = pby - distance;
-+        for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
-+      }
-+    }
-+  }
-+  p->additionalOffset++;
-+  *numDistancePairsRes = numPairs;
-+  return lenRes;
-+}
-+
-+
-+#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
-+#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
-+#define IsShortRep(p) ((p)->backPrev == 0)
-+
-+static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
-+{
-+  return
-+    GET_PRICE_0(p->isRepG0[state]) +
-+    GET_PRICE_0(p->isRep0Long[state][posState]);
-+}
-+
-+static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
-+{
-+  UInt32 price;
-+  if (repIndex == 0)
-+  {
-+    price = GET_PRICE_0(p->isRepG0[state]);
-+    price += GET_PRICE_1(p->isRep0Long[state][posState]);
-+  }
-+  else
-+  {
-+    price = GET_PRICE_1(p->isRepG0[state]);
-+    if (repIndex == 1)
-+      price += GET_PRICE_0(p->isRepG1[state]);
-+    else
-+    {
-+      price += GET_PRICE_1(p->isRepG1[state]);
-+      price += GET_PRICE(p->isRepG2[state], repIndex - 2);
-+    }
-+  }
-+  return price;
-+}
-+
-+static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
-+{
-+  return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
-+    GetPureRepPrice(p, repIndex, state, posState);
-+}
-+
-+static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
-+{
-+  UInt32 posMem = p->opt[cur].posPrev;
-+  UInt32 backMem = p->opt[cur].backPrev;
-+  p->optimumEndIndex = cur;
-+  do
-+  {
-+    if (p->opt[cur].prev1IsChar)
-+    {
-+      MakeAsChar(&p->opt[posMem])
-+      p->opt[posMem].posPrev = posMem - 1;
-+      if (p->opt[cur].prev2)
-+      {
-+        p->opt[posMem - 1].prev1IsChar = False;
-+        p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
-+        p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
-+      }
-+    }
-+    {
-+      UInt32 posPrev = posMem;
-+      UInt32 backCur = backMem;
-+
-+      backMem = p->opt[posPrev].backPrev;
-+      posMem = p->opt[posPrev].posPrev;
-+
-+      p->opt[posPrev].backPrev = backCur;
-+      p->opt[posPrev].posPrev = cur;
-+      cur = posPrev;
-+    }
-+  }
-+  while (cur != 0);
-+  *backRes = p->opt[0].backPrev;
-+  p->optimumCurrentIndex  = p->opt[0].posPrev;
-+  return p->optimumCurrentIndex;
-+}
-+
-+#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
-+
-+static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
-+{
-+  UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
-+  UInt32 matchPrice, repMatchPrice, normalMatchPrice;
-+  UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
-+  UInt32 *matches;
-+  const Byte *data;
-+  Byte curByte, matchByte;
-+  if (p->optimumEndIndex != p->optimumCurrentIndex)
-+  {
-+    const COptimal *opt = &p->opt[p->optimumCurrentIndex];
-+    UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
-+    *backRes = opt->backPrev;
-+    p->optimumCurrentIndex = opt->posPrev;
-+    return lenRes;
-+  }
-+  p->optimumCurrentIndex = p->optimumEndIndex = 0;
-+
-+  if (p->additionalOffset == 0)
-+    mainLen = ReadMatchDistances(p, &numPairs);
-+  else
-+  {
-+    mainLen = p->longestMatchLength;
-+    numPairs = p->numPairs;
-+  }
-+
-+  numAvail = p->numAvail;
-+  if (numAvail < 2)
-+  {
-+    *backRes = (UInt32)(-1);
-+    return 1;
-+  }
-+  if (numAvail > LZMA_MATCH_LEN_MAX)
-+    numAvail = LZMA_MATCH_LEN_MAX;
-+
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+  repMaxIndex = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 lenTest;
-+    const Byte *data2;
-+    reps[i] = p->reps[i];
-+    data2 = data - (reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+    {
-+      repLens[i] = 0;
-+      continue;
-+    }
-+    for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+    repLens[i] = lenTest;
-+    if (lenTest > repLens[repMaxIndex])
-+      repMaxIndex = i;
-+  }
-+  if (repLens[repMaxIndex] >= p->numFastBytes)
-+  {
-+    UInt32 lenRes;
-+    *backRes = repMaxIndex;
-+    lenRes = repLens[repMaxIndex];
-+    MovePos(p, lenRes - 1);
-+    return lenRes;
-+  }
-+
-+  matches = p->matches;
-+  if (mainLen >= p->numFastBytes)
-+  {
-+    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+    MovePos(p, mainLen - 1);
-+    return mainLen;
-+  }
-+  curByte = *data;
-+  matchByte = *(data - (reps[0] + 1));
-+
-+  if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
-+  {
-+    *backRes = (UInt32)-1;
-+    return 1;
-+  }
-+
-+  p->opt[0].state = (CState)p->state;
-+
-+  posState = (position & p->pbMask);
-+
-+  {
-+    const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+    p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
-+        (!IsCharState(p->state) ?
-+          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+  }
-+
-+  MakeAsChar(&p->opt[1]);
-+
-+  matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
-+  repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
-+
-+  if (matchByte == curByte)
-+  {
-+    UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
-+    if (shortRepPrice < p->opt[1].price)
-+    {
-+      p->opt[1].price = shortRepPrice;
-+      MakeAsShortRep(&p->opt[1]);
-+    }
-+  }
-+  lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
-+
-+  if (lenEnd < 2)
-+  {
-+    *backRes = p->opt[1].backPrev;
-+    return 1;
-+  }
-+
-+  p->opt[1].posPrev = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+    p->opt[0].backs[i] = reps[i];
-+
-+  len = lenEnd;
-+  do
-+    p->opt[len--].price = kInfinityPrice;
-+  while (len >= 2);
-+
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 repLen = repLens[i];
-+    UInt32 price;
-+    if (repLen < 2)
-+      continue;
-+    price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
-+    do
-+    {
-+      UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
-+      COptimal *opt = &p->opt[repLen];
-+      if (curAndLenPrice < opt->price)
-+      {
-+        opt->price = curAndLenPrice;
-+        opt->posPrev = 0;
-+        opt->backPrev = i;
-+        opt->prev1IsChar = False;
-+      }
-+    }
-+    while (--repLen >= 2);
-+  }
-+
-+  normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
-+
-+  len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
-+  if (len <= mainLen)
-+  {
-+    UInt32 offs = 0;
-+    while (len > matches[offs])
-+      offs += 2;
-+    for (; ; len++)
-+    {
-+      COptimal *opt;
-+      UInt32 distance = matches[offs + 1];
-+
-+      UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
-+      UInt32 lenToPosState = GetLenToPosState(len);
-+      if (distance < kNumFullDistances)
-+        curAndLenPrice += p->distancesPrices[lenToPosState][distance];
-+      else
-+      {
-+        UInt32 slot;
-+        GetPosSlot2(distance, slot);
-+        curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
-+      }
-+      opt = &p->opt[len];
-+      if (curAndLenPrice < opt->price)
-+      {
-+        opt->price = curAndLenPrice;
-+        opt->posPrev = 0;
-+        opt->backPrev = distance + LZMA_NUM_REPS;
-+        opt->prev1IsChar = False;
-+      }
-+      if (len == matches[offs])
-+      {
-+        offs += 2;
-+        if (offs == numPairs)
-+          break;
-+      }
-+    }
-+  }
-+
-+  cur = 0;
-+
-+    #ifdef SHOW_STAT2
-+    if (position >= 0)
-+    {
-+      unsigned i;
-+      printf("\n pos = %4X", position);
-+      for (i = cur; i <= lenEnd; i++)
-+      printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
-+    }
-+    #endif
-+
-+  for (;;)
-+  {
-+    UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
-+    UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
-+    Bool nextIsChar;
-+    Byte curByte, matchByte;
-+    const Byte *data;
-+    COptimal *curOpt;
-+    COptimal *nextOpt;
-+
-+    cur++;
-+    if (cur == lenEnd)
-+      return Backward(p, backRes, cur);
-+
-+    newLen = ReadMatchDistances(p, &numPairs);
-+    if (newLen >= p->numFastBytes)
-+    {
-+      p->numPairs = numPairs;
-+      p->longestMatchLength = newLen;
-+      return Backward(p, backRes, cur);
-+    }
-+    position++;
-+    curOpt = &p->opt[cur];
-+    posPrev = curOpt->posPrev;
-+    if (curOpt->prev1IsChar)
-+    {
-+      posPrev--;
-+      if (curOpt->prev2)
-+      {
-+        state = p->opt[curOpt->posPrev2].state;
-+        if (curOpt->backPrev2 < LZMA_NUM_REPS)
-+          state = kRepNextStates[state];
-+        else
-+          state = kMatchNextStates[state];
-+      }
-+      else
-+        state = p->opt[posPrev].state;
-+      state = kLiteralNextStates[state];
-+    }
-+    else
-+      state = p->opt[posPrev].state;
-+    if (posPrev == cur - 1)
-+    {
-+      if (IsShortRep(curOpt))
-+        state = kShortRepNextStates[state];
-+      else
-+        state = kLiteralNextStates[state];
-+    }
-+    else
-+    {
-+      UInt32 pos;
-+      const COptimal *prevOpt;
-+      if (curOpt->prev1IsChar && curOpt->prev2)
-+      {
-+        posPrev = curOpt->posPrev2;
-+        pos = curOpt->backPrev2;
-+        state = kRepNextStates[state];
-+      }
-+      else
-+      {
-+        pos = curOpt->backPrev;
-+        if (pos < LZMA_NUM_REPS)
-+          state = kRepNextStates[state];
-+        else
-+          state = kMatchNextStates[state];
-+      }
-+      prevOpt = &p->opt[posPrev];
-+      if (pos < LZMA_NUM_REPS)
-+      {
-+        UInt32 i;
-+        reps[0] = prevOpt->backs[pos];
-+        for (i = 1; i <= pos; i++)
-+          reps[i] = prevOpt->backs[i - 1];
-+        for (; i < LZMA_NUM_REPS; i++)
-+          reps[i] = prevOpt->backs[i];
-+      }
-+      else
-+      {
-+        UInt32 i;
-+        reps[0] = (pos - LZMA_NUM_REPS);
-+        for (i = 1; i < LZMA_NUM_REPS; i++)
-+          reps[i] = prevOpt->backs[i - 1];
-+      }
-+    }
-+    curOpt->state = (CState)state;
-+
-+    curOpt->backs[0] = reps[0];
-+    curOpt->backs[1] = reps[1];
-+    curOpt->backs[2] = reps[2];
-+    curOpt->backs[3] = reps[3];
-+
-+    curPrice = curOpt->price;
-+    nextIsChar = False;
-+    data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+    curByte = *data;
-+    matchByte = *(data - (reps[0] + 1));
-+
-+    posState = (position & p->pbMask);
-+
-+    curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
-+    {
-+      const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+      curAnd1Price +=
-+        (!IsCharState(state) ?
-+          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+    }
-+
-+    nextOpt = &p->opt[cur + 1];
-+
-+    if (curAnd1Price < nextOpt->price)
-+    {
-+      nextOpt->price = curAnd1Price;
-+      nextOpt->posPrev = cur;
-+      MakeAsChar(nextOpt);
-+      nextIsChar = True;
-+    }
-+
-+    matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
-+    repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
-+
-+    if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
-+    {
-+      UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
-+      if (shortRepPrice <= nextOpt->price)
-+      {
-+        nextOpt->price = shortRepPrice;
-+        nextOpt->posPrev = cur;
-+        MakeAsShortRep(nextOpt);
-+        nextIsChar = True;
-+      }
-+    }
-+    numAvailFull = p->numAvail;
-+    {
-+      UInt32 temp = kNumOpts - 1 - cur;
-+      if (temp < numAvailFull)
-+        numAvailFull = temp;
-+    }
-+
-+    if (numAvailFull < 2)
-+      continue;
-+    numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
-+
-+    if (!nextIsChar && matchByte != curByte) /* speed optimization */
-+    {
-+      /* try Literal + rep0 */
-+      UInt32 temp;
-+      UInt32 lenTest2;
-+      const Byte *data2 = data - (reps[0] + 1);
-+      UInt32 limit = p->numFastBytes + 1;
-+      if (limit > numAvailFull)
-+        limit = numAvailFull;
-+
-+      for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
-+      lenTest2 = temp - 1;
-+      if (lenTest2 >= 2)
-+      {
-+        UInt32 state2 = kLiteralNextStates[state];
-+        UInt32 posStateNext = (position + 1) & p->pbMask;
-+        UInt32 nextRepMatchPrice = curAnd1Price +
-+            GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+            GET_PRICE_1(p->isRep[state2]);
-+        /* for (; lenTest2 >= 2; lenTest2--) */
-+        {
-+          UInt32 curAndLenPrice;
-+          COptimal *opt;
-+          UInt32 offset = cur + 1 + lenTest2;
-+          while (lenEnd < offset)
-+            p->opt[++lenEnd].price = kInfinityPrice;
-+          curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+          opt = &p->opt[offset];
-+          if (curAndLenPrice < opt->price)
-+          {
-+            opt->price = curAndLenPrice;
-+            opt->posPrev = cur + 1;
-+            opt->backPrev = 0;
-+            opt->prev1IsChar = True;
-+            opt->prev2 = False;
-+          }
-+        }
-+      }
-+    }
-+
-+    startLen = 2; /* speed optimization */
-+    {
-+    UInt32 repIndex;
-+    for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
-+    {
-+      UInt32 lenTest;
-+      UInt32 lenTestTemp;
-+      UInt32 price;
-+      const Byte *data2 = data - (reps[repIndex] + 1);
-+      if (data[0] != data2[0] || data[1] != data2[1])
-+        continue;
-+      for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+      while (lenEnd < cur + lenTest)
-+        p->opt[++lenEnd].price = kInfinityPrice;
-+      lenTestTemp = lenTest;
-+      price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
-+      do
-+      {
-+        UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
-+        COptimal *opt = &p->opt[cur + lenTest];
-+        if (curAndLenPrice < opt->price)
-+        {
-+          opt->price = curAndLenPrice;
-+          opt->posPrev = cur;
-+          opt->backPrev = repIndex;
-+          opt->prev1IsChar = False;
-+        }
-+      }
-+      while (--lenTest >= 2);
-+      lenTest = lenTestTemp;
-+
-+      if (repIndex == 0)
-+        startLen = lenTest + 1;
-+
-+      /* if (_maxMode) */
-+        {
-+          UInt32 lenTest2 = lenTest + 1;
-+          UInt32 limit = lenTest2 + p->numFastBytes;
-+          UInt32 nextRepMatchPrice;
-+          if (limit > numAvailFull)
-+            limit = numAvailFull;
-+          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+          lenTest2 -= lenTest + 1;
-+          if (lenTest2 >= 2)
-+          {
-+            UInt32 state2 = kRepNextStates[state];
-+            UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+            UInt32 curAndLenCharPrice =
-+                price + p->repLenEnc.prices[posState][lenTest - 2] +
-+                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+                    data[lenTest], data2[lenTest], p->ProbPrices);
-+            state2 = kLiteralNextStates[state2];
-+            posStateNext = (position + lenTest + 1) & p->pbMask;
-+            nextRepMatchPrice = curAndLenCharPrice +
-+                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+                GET_PRICE_1(p->isRep[state2]);
-+
-+            /* for (; lenTest2 >= 2; lenTest2--) */
-+            {
-+              UInt32 curAndLenPrice;
-+              COptimal *opt;
-+              UInt32 offset = cur + lenTest + 1 + lenTest2;
-+              while (lenEnd < offset)
-+                p->opt[++lenEnd].price = kInfinityPrice;
-+              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+              opt = &p->opt[offset];
-+              if (curAndLenPrice < opt->price)
-+              {
-+                opt->price = curAndLenPrice;
-+                opt->posPrev = cur + lenTest + 1;
-+                opt->backPrev = 0;
-+                opt->prev1IsChar = True;
-+                opt->prev2 = True;
-+                opt->posPrev2 = cur;
-+                opt->backPrev2 = repIndex;
-+              }
-+            }
-+          }
-+        }
-+    }
-+    }
-+    /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
-+    if (newLen > numAvail)
-+    {
-+      newLen = numAvail;
-+      for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
-+      matches[numPairs] = newLen;
-+      numPairs += 2;
-+    }
-+    if (newLen >= startLen)
-+    {
-+      UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
-+      UInt32 offs, curBack, posSlot;
-+      UInt32 lenTest;
-+      while (lenEnd < cur + newLen)
-+        p->opt[++lenEnd].price = kInfinityPrice;
-+
-+      offs = 0;
-+      while (startLen > matches[offs])
-+        offs += 2;
-+      curBack = matches[offs + 1];
-+      GetPosSlot2(curBack, posSlot);
-+      for (lenTest = /*2*/ startLen; ; lenTest++)
-+      {
-+        UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
-+        UInt32 lenToPosState = GetLenToPosState(lenTest);
-+        COptimal *opt;
-+        if (curBack < kNumFullDistances)
-+          curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
-+        else
-+          curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
-+
-+        opt = &p->opt[cur + lenTest];
-+        if (curAndLenPrice < opt->price)
-+        {
-+          opt->price = curAndLenPrice;
-+          opt->posPrev = cur;
-+          opt->backPrev = curBack + LZMA_NUM_REPS;
-+          opt->prev1IsChar = False;
-+        }
-+
-+        if (/*_maxMode && */lenTest == matches[offs])
-+        {
-+          /* Try Match + Literal + Rep0 */
-+          const Byte *data2 = data - (curBack + 1);
-+          UInt32 lenTest2 = lenTest + 1;
-+          UInt32 limit = lenTest2 + p->numFastBytes;
-+          UInt32 nextRepMatchPrice;
-+          if (limit > numAvailFull)
-+            limit = numAvailFull;
-+          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+          lenTest2 -= lenTest + 1;
-+          if (lenTest2 >= 2)
-+          {
-+            UInt32 state2 = kMatchNextStates[state];
-+            UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+            UInt32 curAndLenCharPrice = curAndLenPrice +
-+                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+                    data[lenTest], data2[lenTest], p->ProbPrices);
-+            state2 = kLiteralNextStates[state2];
-+            posStateNext = (posStateNext + 1) & p->pbMask;
-+            nextRepMatchPrice = curAndLenCharPrice +
-+                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+                GET_PRICE_1(p->isRep[state2]);
-+
-+            /* for (; lenTest2 >= 2; lenTest2--) */
-+            {
-+              UInt32 offset = cur + lenTest + 1 + lenTest2;
-+              UInt32 curAndLenPrice;
-+              COptimal *opt;
-+              while (lenEnd < offset)
-+                p->opt[++lenEnd].price = kInfinityPrice;
-+              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+              opt = &p->opt[offset];
-+              if (curAndLenPrice < opt->price)
-+              {
-+                opt->price = curAndLenPrice;
-+                opt->posPrev = cur + lenTest + 1;
-+                opt->backPrev = 0;
-+                opt->prev1IsChar = True;
-+                opt->prev2 = True;
-+                opt->posPrev2 = cur;
-+                opt->backPrev2 = curBack + LZMA_NUM_REPS;
-+              }
-+            }
-+          }
-+          offs += 2;
-+          if (offs == numPairs)
-+            break;
-+          curBack = matches[offs + 1];
-+          if (curBack >= kNumFullDistances)
-+            GetPosSlot2(curBack, posSlot);
-+        }
-+      }
-+    }
-+  }
-+}
-+
-+#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
-+
-+static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
-+{
-+  UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
-+  const Byte *data;
-+  const UInt32 *matches;
-+
-+  if (p->additionalOffset == 0)
-+    mainLen = ReadMatchDistances(p, &numPairs);
-+  else
-+  {
-+    mainLen = p->longestMatchLength;
-+    numPairs = p->numPairs;
-+  }
-+
-+  numAvail = p->numAvail;
-+  *backRes = (UInt32)-1;
-+  if (numAvail < 2)
-+    return 1;
-+  if (numAvail > LZMA_MATCH_LEN_MAX)
-+    numAvail = LZMA_MATCH_LEN_MAX;
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+
-+  repLen = repIndex = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 len;
-+    const Byte *data2 = data - (p->reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+      continue;
-+    for (len = 2; len < numAvail && data[len] == data2[len]; len++);
-+    if (len >= p->numFastBytes)
-+    {
-+      *backRes = i;
-+      MovePos(p, len - 1);
-+      return len;
-+    }
-+    if (len > repLen)
-+    {
-+      repIndex = i;
-+      repLen = len;
-+    }
-+  }
-+
-+  matches = p->matches;
-+  if (mainLen >= p->numFastBytes)
-+  {
-+    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+    MovePos(p, mainLen - 1);
-+    return mainLen;
-+  }
-+
-+  mainDist = 0; /* for GCC */
-+  if (mainLen >= 2)
-+  {
-+    mainDist = matches[numPairs - 1];
-+    while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
-+    {
-+      if (!ChangePair(matches[numPairs - 3], mainDist))
-+        break;
-+      numPairs -= 2;
-+      mainLen = matches[numPairs - 2];
-+      mainDist = matches[numPairs - 1];
-+    }
-+    if (mainLen == 2 && mainDist >= 0x80)
-+      mainLen = 1;
-+  }
-+
-+  if (repLen >= 2 && (
-+        (repLen + 1 >= mainLen) ||
-+        (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
-+        (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
-+  {
-+    *backRes = repIndex;
-+    MovePos(p, repLen - 1);
-+    return repLen;
-+  }
-+
-+  if (mainLen < 2 || numAvail <= 2)
-+    return 1;
-+
-+  p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
-+  if (p->longestMatchLength >= 2)
-+  {
-+    UInt32 newDistance = matches[p->numPairs - 1];
-+    if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
-+        (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
-+        (p->longestMatchLength > mainLen + 1) ||
-+        (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
-+      return 1;
-+  }
-+
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 len, limit;
-+    const Byte *data2 = data - (p->reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+      continue;
-+    limit = mainLen - 1;
-+    for (len = 2; len < limit && data[len] == data2[len]; len++);
-+    if (len >= limit)
-+      return 1;
-+  }
-+  *backRes = mainDist + LZMA_NUM_REPS;
-+  MovePos(p, mainLen - 2);
-+  return mainLen;
-+}
-+
-+static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
-+{
-+  UInt32 len;
-+  RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+  RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+  p->state = kMatchNextStates[p->state];
-+  len = LZMA_MATCH_LEN_MIN;
-+  LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+  RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
-+  RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
-+  RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
-+}
-+
-+static SRes CheckErrors(CLzmaEnc *p)
-+{
-+  if (p->result != SZ_OK)
-+    return p->result;
-+  if (p->rc.res != SZ_OK)
-+    p->result = SZ_ERROR_WRITE;
-+  if (p->matchFinderBase.result != SZ_OK)
-+    p->result = SZ_ERROR_READ;
-+  if (p->result != SZ_OK)
-+    p->finished = True;
-+  return p->result;
-+}
-+
-+static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
-+{
-+  /* ReleaseMFStream(); */
-+  p->finished = True;
-+  if (p->writeEndMark)
-+    WriteEndMarker(p, nowPos & p->pbMask);
-+  RangeEnc_FlushData(&p->rc);
-+  RangeEnc_FlushStream(&p->rc);
-+  return CheckErrors(p);
-+}
-+
-+static void FillAlignPrices(CLzmaEnc *p)
-+{
-+  UInt32 i;
-+  for (i = 0; i < kAlignTableSize; i++)
-+    p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
-+  p->alignPriceCount = 0;
-+}
-+
-+static void FillDistancesPrices(CLzmaEnc *p)
-+{
-+  UInt32 tempPrices[kNumFullDistances];
-+  UInt32 i, lenToPosState;
-+  for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
-+  {
-+    UInt32 posSlot = GetPosSlot1(i);
-+    UInt32 footerBits = ((posSlot >> 1) - 1);
-+    UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+    tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
-+  }
-+
-+  for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
-+  {
-+    UInt32 posSlot;
-+    const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
-+    UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
-+    for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
-+      posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
-+    for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
-+      posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
-+
-+    {
-+      UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
-+      UInt32 i;
-+      for (i = 0; i < kStartPosModelIndex; i++)
-+        distancesPrices[i] = posSlotPrices[i];
-+      for (; i < kNumFullDistances; i++)
-+        distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
-+    }
-+  }
-+  p->matchPriceCount = 0;
-+}
-+
-+static void LzmaEnc_Construct(CLzmaEnc *p)
-+{
-+  RangeEnc_Construct(&p->rc);
-+  MatchFinder_Construct(&p->matchFinderBase);
-+  #ifndef _7ZIP_ST
-+  MatchFinderMt_Construct(&p->matchFinderMt);
-+  p->matchFinderMt.MatchFinder = &p->matchFinderBase;
-+  #endif
-+
-+  {
-+    CLzmaEncProps props;
-+    LzmaEncProps_Init(&props);
-+    LzmaEnc_SetProps(p, &props);
-+  }
-+
-+  #ifndef LZMA_LOG_BSR
-+  LzmaEnc_FastPosInit(p->g_FastPos);
-+  #endif
-+
-+  LzmaEnc_InitPriceTables(p->ProbPrices);
-+  p->litProbs = 0;
-+  p->saveState.litProbs = 0;
-+}
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
-+{
-+  void *p;
-+  p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
-+  if (p != 0)
-+    LzmaEnc_Construct((CLzmaEnc *)p);
-+  return p;
-+}
-+
-+static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->litProbs);
-+  alloc->Free(alloc, p->saveState.litProbs);
-+  p->litProbs = 0;
-+  p->saveState.litProbs = 0;
-+}
-+
-+static void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  #ifndef _7ZIP_ST
-+  MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-+  #endif
-+  MatchFinder_Free(&p->matchFinderBase, allocBig);
-+  LzmaEnc_FreeLits(p, alloc);
-+  RangeEnc_Free(&p->rc, alloc);
-+}
-+
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
-+  alloc->Free(alloc, p);
-+}
-+
-+static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
-+{
-+  UInt32 nowPos32, startPos32;
-+  if (p->needInit)
-+  {
-+    p->matchFinder.Init(p->matchFinderObj);
-+    p->needInit = 0;
-+  }
-+
-+  if (p->finished)
-+    return p->result;
-+  RINOK(CheckErrors(p));
-+
-+  nowPos32 = (UInt32)p->nowPos64;
-+  startPos32 = nowPos32;
-+
-+  if (p->nowPos64 == 0)
-+  {
-+    UInt32 numPairs;
-+    Byte curByte;
-+    if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+      return Flush(p, nowPos32);
-+    ReadMatchDistances(p, &numPairs);
-+    RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
-+    p->state = kLiteralNextStates[p->state];
-+    curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
-+    LitEnc_Encode(&p->rc, p->litProbs, curByte);
-+    p->additionalOffset--;
-+    nowPos32++;
-+  }
-+
-+  if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
-+  for (;;)
-+  {
-+    UInt32 pos, len, posState;
-+
-+    if (p->fastMode)
-+      len = GetOptimumFast(p, &pos);
-+    else
-+      len = GetOptimum(p, nowPos32, &pos);
-+
-+    #ifdef SHOW_STAT2
-+    printf("\n pos = %4X,   len = %d   pos = %d", nowPos32, len, pos);
-+    #endif
-+
-+    posState = nowPos32 & p->pbMask;
-+    if (len == 1 && pos == (UInt32)-1)
-+    {
-+      Byte curByte;
-+      CLzmaProb *probs;
-+      const Byte *data;
-+
-+      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
-+      data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+      curByte = *data;
-+      probs = LIT_PROBS(nowPos32, *(data - 1));
-+      if (IsCharState(p->state))
-+        LitEnc_Encode(&p->rc, probs, curByte);
-+      else
-+        LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
-+      p->state = kLiteralNextStates[p->state];
-+    }
-+    else
-+    {
-+      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+      if (pos < LZMA_NUM_REPS)
-+      {
-+        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
-+        if (pos == 0)
-+        {
-+          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
-+          RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
-+        }
-+        else
-+        {
-+          UInt32 distance = p->reps[pos];
-+          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
-+          if (pos == 1)
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
-+          else
-+          {
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
-+            if (pos == 3)
-+              p->reps[3] = p->reps[2];
-+            p->reps[2] = p->reps[1];
-+          }
-+          p->reps[1] = p->reps[0];
-+          p->reps[0] = distance;
-+        }
-+        if (len == 1)
-+          p->state = kShortRepNextStates[p->state];
-+        else
-+        {
-+          LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+          p->state = kRepNextStates[p->state];
-+        }
-+      }
-+      else
-+      {
-+        UInt32 posSlot;
-+        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+        p->state = kMatchNextStates[p->state];
-+        LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+        pos -= LZMA_NUM_REPS;
-+        GetPosSlot(pos, posSlot);
-+        RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
-+
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          UInt32 footerBits = ((posSlot >> 1) - 1);
-+          UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+          UInt32 posReduced = pos - base;
-+
-+          if (posSlot < kEndPosModelIndex)
-+            RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
-+          else
-+          {
-+            RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
-+            RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
-+            p->alignPriceCount++;
-+          }
-+        }
-+        p->reps[3] = p->reps[2];
-+        p->reps[2] = p->reps[1];
-+        p->reps[1] = p->reps[0];
-+        p->reps[0] = pos;
-+        p->matchPriceCount++;
-+      }
-+    }
-+    p->additionalOffset -= len;
-+    nowPos32 += len;
-+    if (p->additionalOffset == 0)
-+    {
-+      UInt32 processed;
-+      if (!p->fastMode)
-+      {
-+        if (p->matchPriceCount >= (1 << 7))
-+          FillDistancesPrices(p);
-+        if (p->alignPriceCount >= kAlignTableSize)
-+          FillAlignPrices(p);
-+      }
-+      if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+        break;
-+      processed = nowPos32 - startPos32;
-+      if (useLimits)
-+      {
-+        if (processed + kNumOpts + 300 >= maxUnpackSize ||
-+            RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
-+          break;
-+      }
-+      else if (processed >= (1 << 15))
-+      {
-+        p->nowPos64 += nowPos32 - startPos32;
-+        return CheckErrors(p);
-+      }
-+    }
-+  }
-+  p->nowPos64 += nowPos32 - startPos32;
-+  return Flush(p, nowPos32);
-+}
-+
-+#define kBigHashDicLimit ((UInt32)1 << 24)
-+
-+static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  UInt32 beforeSize = kNumOpts;
-+  Bool btMode;
-+  if (!RangeEnc_Alloc(&p->rc, alloc))
-+    return SZ_ERROR_MEM;
-+  btMode = (p->matchFinderBase.btMode != 0);
-+  #ifndef _7ZIP_ST
-+  p->mtMode = (p->multiThread && !p->fastMode && btMode);
-+  #endif
-+
-+  {
-+    unsigned lclp = p->lc + p->lp;
-+    if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
-+    {
-+      LzmaEnc_FreeLits(p, alloc);
-+      p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+      p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+      if (p->litProbs == 0 || p->saveState.litProbs == 0)
-+      {
-+        LzmaEnc_FreeLits(p, alloc);
-+        return SZ_ERROR_MEM;
-+      }
-+      p->lclp = lclp;
-+    }
-+  }
-+
-+  p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
-+
-+  if (beforeSize + p->dictSize < keepWindowSize)
-+    beforeSize = keepWindowSize - p->dictSize;
-+
-+  #ifndef _7ZIP_ST
-+  if (p->mtMode)
-+  {
-+    RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
-+    p->matchFinderObj = &p->matchFinderMt;
-+    MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
-+  }
-+  else
-+  #endif
-+  {
-+    if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
-+      return SZ_ERROR_MEM;
-+    p->matchFinderObj = &p->matchFinderBase;
-+    MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
-+  }
-+  return SZ_OK;
-+}
-+
-+static void LzmaEnc_Init(CLzmaEnc *p)
-+{
-+  UInt32 i;
-+  p->state = 0;
-+  for (i = 0 ; i < LZMA_NUM_REPS; i++)
-+    p->reps[i] = 0;
-+
-+  RangeEnc_Init(&p->rc);
-+
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    UInt32 j;
-+    for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
-+    {
-+      p->isMatch[i][j] = kProbInitValue;
-+      p->isRep0Long[i][j] = kProbInitValue;
-+    }
-+    p->isRep[i] = kProbInitValue;
-+    p->isRepG0[i] = kProbInitValue;
-+    p->isRepG1[i] = kProbInitValue;
-+    p->isRepG2[i] = kProbInitValue;
-+  }
-+
-+  {
-+    UInt32 num = 0x300 << (p->lp + p->lc);
-+    for (i = 0; i < num; i++)
-+      p->litProbs[i] = kProbInitValue;
-+  }
-+
-+  {
-+    for (i = 0; i < kNumLenToPosStates; i++)
-+    {
-+      CLzmaProb *probs = p->posSlotEncoder[i];
-+      UInt32 j;
-+      for (j = 0; j < (1 << kNumPosSlotBits); j++)
-+        probs[j] = kProbInitValue;
-+    }
-+  }
-+  {
-+    for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
-+      p->posEncoders[i] = kProbInitValue;
-+  }
-+
-+  LenEnc_Init(&p->lenEnc.p);
-+  LenEnc_Init(&p->repLenEnc.p);
-+
-+  for (i = 0; i < (1 << kNumAlignBits); i++)
-+    p->posAlignEncoder[i] = kProbInitValue;
-+
-+  p->optimumEndIndex = 0;
-+  p->optimumCurrentIndex = 0;
-+  p->additionalOffset = 0;
-+
-+  p->pbMask = (1 << p->pb) - 1;
-+  p->lpMask = (1 << p->lp) - 1;
-+}
-+
-+static void LzmaEnc_InitPrices(CLzmaEnc *p)
-+{
-+  if (!p->fastMode)
-+  {
-+    FillDistancesPrices(p);
-+    FillAlignPrices(p);
-+  }
-+
-+  p->lenEnc.tableSize =
-+  p->repLenEnc.tableSize =
-+      p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
-+  LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
-+  LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
-+}
-+
-+static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  UInt32 i;
-+  for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
-+    if (p->dictSize <= ((UInt32)1 << i))
-+      break;
-+  p->distTableSize = i * 2;
-+
-+  p->finished = False;
-+  p->result = SZ_OK;
-+  RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
-+  LzmaEnc_Init(p);
-+  LzmaEnc_InitPrices(p);
-+  p->nowPos64 = 0;
-+  return SZ_OK;
-+}
-+
-+static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
-+{
-+  p->matchFinderBase.directInput = 1;
-+  p->matchFinderBase.bufferBase = (Byte *)src;
-+  p->matchFinderBase.directInputRem = srcLen;
-+}
-+
-+static SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+    UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  LzmaEnc_SetInputBuf(p, src, srcLen);
-+  p->needInit = 1;
-+
-+  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+static void LzmaEnc_Finish(CLzmaEncHandle pp)
-+{
-+  #ifndef _7ZIP_ST
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  if (p->mtMode)
-+    MatchFinderMt_ReleaseStream(&p->matchFinderMt);
-+  #else
-+  pp = pp;
-+  #endif
-+}
-+
-+typedef struct
-+{
-+  ISeqOutStream funcTable;
-+  Byte *data;
-+  SizeT rem;
-+  Bool overflow;
-+} CSeqOutStreamBuf;
-+
-+static size_t MyWrite(void *pp, const void *data, size_t size)
-+{
-+  CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
-+  if (p->rem < size)
-+  {
-+    size = p->rem;
-+    p->overflow = True;
-+  }
-+  memcpy(p->data, data, size);
-+  p->rem -= size;
-+  p->data += size;
-+  return size;
-+}
-+
-+static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
-+{
-+  SRes res = SZ_OK;
-+
-+  #ifndef _7ZIP_ST
-+  Byte allocaDummy[0x300];
-+  int i = 0;
-+  for (i = 0; i < 16; i++)
-+    allocaDummy[i] = (Byte)i;
-+  #endif
-+
-+  for (;;)
-+  {
-+    res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
-+    if (res != SZ_OK || p->finished != 0)
-+      break;
-+    if (progress != 0)
-+    {
-+      res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
-+      if (res != SZ_OK)
-+      {
-+        res = SZ_ERROR_PROGRESS;
-+        break;
-+      }
-+    }
-+  }
-+  LzmaEnc_Finish(p);
-+  return res;
-+}
-+
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  int i;
-+  UInt32 dictSize = p->dictSize;
-+  if (*size < LZMA_PROPS_SIZE)
-+    return SZ_ERROR_PARAM;
-+  *size = LZMA_PROPS_SIZE;
-+  props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
-+
-+  for (i = 11; i <= 30; i++)
-+  {
-+    if (dictSize <= ((UInt32)2 << i))
-+    {
-+      dictSize = (2 << i);
-+      break;
-+    }
-+    if (dictSize <= ((UInt32)3 << i))
-+    {
-+      dictSize = (3 << i);
-+      break;
-+    }
-+  }
-+
-+  for (i = 0; i < 4; i++)
-+    props[1 + i] = (Byte)(dictSize >> (8 * i));
-+  return SZ_OK;
-+}
-+
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  SRes res;
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+
-+  CSeqOutStreamBuf outStream;
-+
-+  LzmaEnc_SetInputBuf(p, src, srcLen);
-+
-+  outStream.funcTable.Write = MyWrite;
-+  outStream.data = dest;
-+  outStream.rem = *destLen;
-+  outStream.overflow = False;
-+
-+  p->writeEndMark = writeEndMark;
-+
-+  p->rc.outStream = &outStream.funcTable;
-+  res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
-+  if (res == SZ_OK)
-+    res = LzmaEnc_Encode2(p, progress);
-+
-+  *destLen -= outStream.rem;
-+  if (outStream.overflow)
-+    return SZ_ERROR_OUTPUT_EOF;
-+  return res;
-+}
---- /dev/null
-+++ b/lib/lzma/Makefile
-@@ -0,0 +1,7 @@
-+lzma_compress-objs := LzFind.o LzmaEnc.o
-+lzma_decompress-objs := LzmaDec.o
-+
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
-+
-+EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
diff --git a/target/linux/generic/pending-5.10/532-jffs2_eofdetect.patch b/target/linux/generic/pending-5.10/532-jffs2_eofdetect.patch
deleted file mode 100644
index 744fbd0e2179..000000000000
--- a/target/linux/generic/pending-5.10/532-jffs2_eofdetect.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fs: jffs2: EOF marker
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- fs/jffs2/build.c | 10 ++++++++++
- fs/jffs2/scan.c  | 21 +++++++++++++++++++--
- 2 files changed, 29 insertions(+), 2 deletions(-)
-
---- a/fs/jffs2/build.c
-+++ b/fs/jffs2/build.c
-@@ -117,6 +117,16 @@ static int jffs2_build_filesystem(struct
- 	dbg_fsbuild("scanned flash completely\n");
- 	jffs2_dbg_dump_block_lists_nolock(c);
- 
-+	if (c->flags & (1 << 7)) {
-+		printk("%s(): unlocking the mtd device... ", __func__);
-+		mtd_unlock(c->mtd, 0, c->mtd->size);
-+		printk("done.\n");
-+
-+		printk("%s(): erasing all blocks after the end marker... ", __func__);
-+		jffs2_erase_pending_blocks(c, -1);
-+		printk("done.\n");
-+	}
-+
- 	dbg_fsbuild("pass 1 starting\n");
- 	c->flags |= JFFS2_SB_FLAG_BUILDING;
- 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
---- a/fs/jffs2/scan.c
-+++ b/fs/jffs2/scan.c
-@@ -148,8 +148,14 @@ int jffs2_scan_medium(struct jffs2_sb_in
- 		/* reset summary info for next eraseblock scan */
- 		jffs2_sum_reset_collected(s);
- 
--		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
--						buf_size, s);
-+		if (c->flags & (1 << 7)) {
-+			if (mtd_block_isbad(c->mtd, jeb->offset))
-+				ret = BLK_STATE_BADBLOCK;
-+			else
-+				ret = BLK_STATE_ALLFF;
-+		} else
-+			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
-+							buf_size, s);
- 
- 		if (ret < 0)
- 			goto out;
-@@ -567,6 +573,17 @@ full_scan:
- 			return err;
- 	}
- 
-+	if ((buf[0] == 0xde) &&
-+		(buf[1] == 0xad) &&
-+		(buf[2] == 0xc0) &&
-+		(buf[3] == 0xde)) {
-+		/* end of filesystem. erase everything after this point */
-+		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
-+		c->flags |= (1 << 7);
-+
-+		return BLK_STATE_ALLFF;
-+	}
-+
- 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
- 	ofs = 0;
- 	max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
diff --git a/target/linux/generic/pending-5.10/600-netfilter_conntrack_flush.patch b/target/linux/generic/pending-5.10/600-netfilter_conntrack_flush.patch
deleted file mode 100644
index ab6953e5573f..000000000000
--- a/target/linux/generic/pending-5.10/600-netfilter_conntrack_flush.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: add support for flushing conntrack via /proc
-
-lede-commit 8193bbe59a74d34d6a26d4a8cb857b1952905314
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/nf_conntrack_standalone.c | 59 ++++++++++++++++++++++++++++++++-
- 1 file changed, 58 insertions(+), 1 deletion(-)
-
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -9,6 +9,7 @@
- #include <linux/percpu.h>
- #include <linux/netdevice.h>
- #include <linux/security.h>
-+#include <linux/inet.h>
- #include <net/net_namespace.h>
- #ifdef CONFIG_SYSCTL
- #include <linux/sysctl.h>
-@@ -457,6 +458,56 @@ static int ct_cpu_seq_show(struct seq_fi
- 	return 0;
- }
- 
-+struct kill_request {
-+	u16 family;
-+	union nf_inet_addr addr;
-+};
-+
-+static int kill_matching(struct nf_conn *i, void *data)
-+{
-+	struct kill_request *kr = data;
-+	struct nf_conntrack_tuple *t1 = &i->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+	struct nf_conntrack_tuple *t2 = &i->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+	if (!kr->family)
-+		return 1;
-+
-+	if (t1->src.l3num != kr->family)
-+		return 0;
-+
-+	return (nf_inet_addr_cmp(&kr->addr, &t1->src.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t1->dst.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t2->src.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t2->dst.u3));
-+}
-+
-+static int ct_file_write(struct file *file, char *buf, size_t count)
-+{
-+	struct seq_file *seq = file->private_data;
-+	struct net *net = seq_file_net(seq);
-+	struct kill_request kr = { };
-+
-+	if (count == 0)
-+		return 0;
-+
-+	if (count >= INET6_ADDRSTRLEN)
-+		count = INET6_ADDRSTRLEN - 1;
-+
-+	if (strnchr(buf, count, ':')) {
-+		kr.family = AF_INET6;
-+		if (!in6_pton(buf, count, (void *)&kr.addr, '\n', NULL))
-+			return -EINVAL;
-+	} else if (strnchr(buf, count, '.')) {
-+		kr.family = AF_INET;
-+		if (!in4_pton(buf, count, (void *)&kr.addr, '\n', NULL))
-+			return -EINVAL;
-+	}
-+
-+	nf_ct_iterate_cleanup_net(net, kill_matching, &kr, 0, 0);
-+
-+	return 0;
-+}
-+
- static const struct seq_operations ct_cpu_seq_ops = {
- 	.start	= ct_cpu_seq_start,
- 	.next	= ct_cpu_seq_next,
-@@ -470,8 +521,9 @@ static int nf_conntrack_standalone_init_
- 	kuid_t root_uid;
- 	kgid_t root_gid;
- 
--	pde = proc_create_net("nf_conntrack", 0440, net->proc_net, &ct_seq_ops,
--			sizeof(struct ct_iter_state));
-+	pde = proc_create_net_data_write("nf_conntrack", 0440, net->proc_net,
-+					 &ct_seq_ops, &ct_file_write,
-+					 sizeof(struct ct_iter_state), NULL);
- 	if (!pde)
- 		goto out_nf_conntrack;
- 
diff --git a/target/linux/generic/pending-5.10/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/pending-5.10/610-netfilter_match_bypass_default_checks.patch
deleted file mode 100644
index c1e050e935e6..000000000000
--- a/target/linux/generic/pending-5.10/610-netfilter_match_bypass_default_checks.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/netfilter_ipv4/ip_tables.h |  1 +
- net/ipv4/netfilter/ip_tables.c                | 37 +++++++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
-
---- a/include/uapi/linux/netfilter_ipv4/ip_tables.h
-+++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h
-@@ -89,6 +89,7 @@ struct ipt_ip {
- #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
- #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
- #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
-+#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
- 
- /* Values for "inv" field in struct ipt_ip. */
- #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -50,6 +50,9 @@ ip_packet_match(const struct iphdr *ip,
- {
- 	unsigned long ret;
- 
-+	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
-+		return true;
-+
- 	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
- 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
- 	    NF_INVF(ipinfo, IPT_INV_DSTIP,
-@@ -80,6 +83,29 @@ ip_packet_match(const struct iphdr *ip,
- 	return true;
- }
- 
-+static void
-+ip_checkdefault(struct ipt_ip *ip)
-+{
-+	static const char iface_mask[IFNAMSIZ] = {};
-+
-+	if (ip->invflags || ip->flags & IPT_F_FRAG)
-+		return;
-+
-+	if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0)
-+		return;
-+
-+	if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0)
-+		return;
-+
-+	if (ip->smsk.s_addr || ip->dmsk.s_addr)
-+		return;
-+
-+	if (ip->proto)
-+		return;
-+
-+	ip->flags |= IPT_F_NO_DEF_MATCH;
-+}
-+
- static bool
- ip_checkentry(const struct ipt_ip *ip)
- {
-@@ -524,6 +550,8 @@ find_check_entry(struct ipt_entry *e, st
- 	struct xt_mtchk_param mtpar;
- 	struct xt_entry_match *ematch;
- 
-+	ip_checkdefault(&e->ip);
-+
- 	if (!xt_percpu_counter_alloc(alloc_state, &e->counters))
- 		return -ENOMEM;
- 
-@@ -818,6 +846,7 @@ copy_entries_to_user(unsigned int total_
- 	const struct xt_table_info *private = table->private;
- 	int ret = 0;
- 	const void *loc_cpu_entry;
-+	u8 flags;
- 
- 	counters = alloc_counters(table);
- 	if (IS_ERR(counters))
-@@ -845,6 +874,14 @@ copy_entries_to_user(unsigned int total_
- 			goto free_counters;
- 		}
- 
-+		flags = e->ip.flags & IPT_F_MASK;
-+		if (copy_to_user(userptr + off
-+				 + offsetof(struct ipt_entry, ip.flags),
-+				 &flags, sizeof(flags)) != 0) {
-+			ret = -EFAULT;
-+			goto free_counters;
-+		}
-+
- 		for (i = sizeof(struct ipt_entry);
- 		     i < e->target_offset;
- 		     i += m->u.match_size) {
-@@ -1222,12 +1259,15 @@ compat_copy_entry_to_user(struct ipt_ent
- 	compat_uint_t origsize;
- 	const struct xt_entry_match *ematch;
- 	int ret = 0;
-+	u8 flags = e->ip.flags & IPT_F_MASK;
- 
- 	origsize = *size;
- 	ce = *dstptr;
- 	if (copy_to_user(ce, e, sizeof(struct ipt_entry)) != 0 ||
- 	    copy_to_user(&ce->counters, &counters[i],
--	    sizeof(counters[i])) != 0)
-+	    sizeof(counters[i])) != 0 ||
-+	    copy_to_user(&ce->ip.flags, &flags,
-+	    sizeof(flags)) != 0)
- 		return -EFAULT;
- 
- 	*dstptr += sizeof(struct compat_ipt_entry);
diff --git a/target/linux/generic/pending-5.10/611-netfilter_match_bypass_default_table.patch b/target/linux/generic/pending-5.10/611-netfilter_match_bypass_default_table.patch
deleted file mode 100644
index baf738a8d208..000000000000
--- a/target/linux/generic/pending-5.10/611-netfilter_match_bypass_default_table.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: match bypass default table
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/ipv4/netfilter/ip_tables.c | 79 +++++++++++++++++++++++++++++++-----------
- 1 file changed, 58 insertions(+), 21 deletions(-)
-
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -246,6 +246,33 @@ struct ipt_entry *ipt_next_entry(const s
- 	return (void *)entry + entry->next_offset;
- }
- 
-+static bool
-+ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict)
-+{
-+	struct xt_entry_target *t;
-+	struct xt_standard_target *st;
-+
-+	if (e->target_offset != sizeof(struct ipt_entry))
-+		return false;
-+
-+	if (!(e->ip.flags & IPT_F_NO_DEF_MATCH))
-+		return false;
-+
-+	t = ipt_get_target(e);
-+	if (t->u.kernel.target->target)
-+		return false;
-+
-+	st = (struct xt_standard_target *) t;
-+	if (st->verdict == XT_RETURN)
-+		return false;
-+
-+	if (st->verdict >= 0)
-+		return false;
-+
-+	*verdict = (unsigned)(-st->verdict) - 1;
-+	return true;
-+}
-+
- /* Returns one of the generic firewall policies, like NF_ACCEPT. */
- unsigned int
- ipt_do_table(struct sk_buff *skb,
-@@ -266,27 +293,28 @@ ipt_do_table(struct sk_buff *skb,
- 	unsigned int addend;
- 
- 	/* Initialization */
-+	WARN_ON(!(table->valid_hooks & (1 << hook)));
-+	local_bh_disable();
-+	private = READ_ONCE(table->private); /* Address dependency. */
-+	cpu        = smp_processor_id();
-+	table_base = private->entries;
-+
-+	e = get_entry(table_base, private->hook_entry[hook]);
-+	if (ipt_handle_default_rule(e, &verdict)) {
-+		struct xt_counters *counter;
-+
-+		counter = xt_get_this_cpu_counter(&e->counters);
-+		ADD_COUNTER(*counter, skb->len, 1);
-+		local_bh_enable();
-+		return verdict;
-+	}
-+
- 	stackidx = 0;
- 	ip = ip_hdr(skb);
- 	indev = state->in ? state->in->name : nulldevname;
- 	outdev = state->out ? state->out->name : nulldevname;
--	/* We handle fragments by dealing with the first fragment as
--	 * if it was a normal packet.  All other fragments are treated
--	 * normally, except that they will NEVER match rules that ask
--	 * things we don't know, ie. tcp syn flag or ports).  If the
--	 * rule is also a fragment-specific rule, non-fragments won't
--	 * match it. */
--	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
--	acpar.thoff   = ip_hdrlen(skb);
--	acpar.hotdrop = false;
--	acpar.state   = state;
- 
--	WARN_ON(!(table->valid_hooks & (1 << hook)));
--	local_bh_disable();
- 	addend = xt_write_recseq_begin();
--	private = READ_ONCE(table->private); /* Address dependency. */
--	cpu        = smp_processor_id();
--	table_base = private->entries;
- 	jumpstack  = (struct ipt_entry **)private->jumpstack[cpu];
- 
- 	/* Switch to alternate jumpstack if we're being invoked via TEE.
-@@ -299,7 +327,16 @@ ipt_do_table(struct sk_buff *skb,
- 	if (static_key_false(&xt_tee_enabled))
- 		jumpstack += private->stacksize * __this_cpu_read(nf_skb_duplicated);
- 
--	e = get_entry(table_base, private->hook_entry[hook]);
-+	/* We handle fragments by dealing with the first fragment as
-+	 * if it was a normal packet.  All other fragments are treated
-+	 * normally, except that they will NEVER match rules that ask
-+	 * things we don't know, ie. tcp syn flag or ports).  If the
-+	 * rule is also a fragment-specific rule, non-fragments won't
-+	 * match it. */
-+	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
-+	acpar.thoff   = ip_hdrlen(skb);
-+	acpar.hotdrop = false;
-+	acpar.state   = state;
- 
- 	do {
- 		const struct xt_entry_target *t;
diff --git a/target/linux/generic/pending-5.10/612-netfilter_match_reduce_memory_access.patch b/target/linux/generic/pending-5.10/612-netfilter_match_reduce_memory_access.patch
deleted file mode 100644
index 79da6778b684..000000000000
--- a/target/linux/generic/pending-5.10/612-netfilter_match_reduce_memory_access.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: reduce match memory access
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/ipv4/netfilter/ip_tables.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -53,9 +53,9 @@ ip_packet_match(const struct iphdr *ip,
- 	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
- 		return true;
- 
--	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
-+	if (NF_INVF(ipinfo, IPT_INV_SRCIP, ipinfo->smsk.s_addr &&
- 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
--	    NF_INVF(ipinfo, IPT_INV_DSTIP,
-+	    NF_INVF(ipinfo, IPT_INV_DSTIP, ipinfo->dmsk.s_addr &&
- 		    (ip->daddr & ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr))
- 		return false;
- 
diff --git a/target/linux/generic/pending-5.10/620-net_sched-codel-do-not-defer-queue-length-update.patch b/target/linux/generic/pending-5.10/620-net_sched-codel-do-not-defer-queue-length-update.patch
deleted file mode 100644
index 4b4825ae3b9a..000000000000
--- a/target/linux/generic/pending-5.10/620-net_sched-codel-do-not-defer-queue-length-update.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
-Date: Mon, 21 Aug 2017 11:14:14 +0300
-Subject: [PATCH] net_sched/codel: do not defer queue length update
-
-When codel wants to drop last packet in ->dequeue() it cannot call
-qdisc_tree_reduce_backlog() right away - it will notify parent qdisc
-about zero qlen and HTB/HFSC will deactivate class. The same class will
-be deactivated second time by caller of ->dequeue(). Currently codel and
-fq_codel defer update. This triggers warning in HFSC when it's qlen != 0
-but there is no active classes.
-
-This patch update parent queue length immediately: just temporary increase
-qlen around qdisc_tree_reduce_backlog() to prevent first class deactivation
-if we have skb to return.
-
-This might open another problem in HFSC - now operation peek could fail and
-deactivate parent class.
-
-Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
-Link: https://bugzilla.kernel.org/show_bug.cgi?id=109581
----
-
---- a/net/sched/sch_codel.c
-+++ b/net/sched/sch_codel.c
-@@ -95,11 +95,17 @@ static struct sk_buff *codel_qdisc_deque
- 			    &q->stats, qdisc_pkt_len, codel_get_enqueue_time,
- 			    drop_func, dequeue_func);
- 
--	/* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
--	 * or HTB crashes. Defer it for next round.
-+	/* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
-+	 * parent class, dequeue in parent qdisc will do the same if we
-+	 * return skb. Temporary increment qlen if we have skb.
- 	 */
--	if (q->stats.drop_count && sch->q.qlen) {
--		qdisc_tree_reduce_backlog(sch, q->stats.drop_count, q->stats.drop_len);
-+	if (q->stats.drop_count) {
-+		if (skb)
-+			sch->q.qlen++;
-+		qdisc_tree_reduce_backlog(sch, q->stats.drop_count,
-+					  q->stats.drop_len);
-+		if (skb)
-+			sch->q.qlen--;
- 		q->stats.drop_count = 0;
- 		q->stats.drop_len = 0;
- 	}
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -304,6 +304,21 @@ begin:
- 			    &flow->cvars, &q->cstats, qdisc_pkt_len,
- 			    codel_get_enqueue_time, drop_func, dequeue_func);
- 
-+	/* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
-+	 * parent class, dequeue in parent qdisc will do the same if we
-+	 * return skb. Temporary increment qlen if we have skb.
-+	 */
-+	if (q->cstats.drop_count) {
-+		if (skb)
-+			sch->q.qlen++;
-+		qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
-+					  q->cstats.drop_len);
-+		if (skb)
-+			sch->q.qlen--;
-+		q->cstats.drop_count = 0;
-+		q->cstats.drop_len = 0;
-+	}
-+
- 	if (!skb) {
- 		/* force a pass through old_flows to prevent starvation */
- 		if ((head == &q->new_flows) && !list_empty(&q->old_flows))
-@@ -314,15 +329,6 @@ begin:
- 	}
- 	qdisc_bstats_update(sch, skb);
- 	flow->deficit -= qdisc_pkt_len(skb);
--	/* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
--	 * or HTB crashes. Defer it for next round.
--	 */
--	if (q->cstats.drop_count && sch->q.qlen) {
--		qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
--					  q->cstats.drop_len);
--		q->cstats.drop_count = 0;
--		q->cstats.drop_len = 0;
--	}
- 	return skb;
- }
- 
diff --git a/target/linux/generic/pending-5.10/630-packet_socket_type.patch b/target/linux/generic/pending-5.10/630-packet_socket_type.patch
deleted file mode 100644
index e9ecd8a8b2b3..000000000000
--- a/target/linux/generic/pending-5.10/630-packet_socket_type.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: add an optimization for dealing with raw sockets
-
-lede-commit: 4898039703d7315f0f3431c860123338ec3be0f6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/if_packet.h |  3 +++
- net/packet/af_packet.c         | 34 +++++++++++++++++++++++++++-------
- net/packet/internal.h          |  1 +
- 3 files changed, 31 insertions(+), 7 deletions(-)
-
---- a/include/uapi/linux/if_packet.h
-+++ b/include/uapi/linux/if_packet.h
-@@ -33,6 +33,8 @@ struct sockaddr_ll {
- #define PACKET_KERNEL		7		/* To kernel space	*/
- /* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */
- #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
-+#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
-+
- 
- /* Packet socket options */
- 
-@@ -59,6 +61,7 @@ struct sockaddr_ll {
- #define PACKET_ROLLOVER_STATS		21
- #define PACKET_FANOUT_DATA		22
- #define PACKET_IGNORE_OUTGOING		23
-+#define PACKET_RECV_TYPE		24
- 
- #define PACKET_FANOUT_HASH		0
- #define PACKET_FANOUT_LB		1
---- a/net/packet/af_packet.c
-+++ b/net/packet/af_packet.c
-@@ -1822,6 +1822,7 @@ static int packet_rcv_spkt(struct sk_buf
- {
- 	struct sock *sk;
- 	struct sockaddr_pkt *spkt;
-+	struct packet_sock *po;
- 
- 	/*
- 	 *	When we registered the protocol we saved the socket in the data
-@@ -1829,6 +1830,7 @@ static int packet_rcv_spkt(struct sk_buf
- 	 */
- 
- 	sk = pt->af_packet_priv;
-+	po = pkt_sk(sk);
- 
- 	/*
- 	 *	Yank back the headers [hope the device set this
-@@ -1841,7 +1843,7 @@ static int packet_rcv_spkt(struct sk_buf
- 	 *	so that this procedure is noop.
- 	 */
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
- 		goto out;
- 
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
-@@ -2089,12 +2091,12 @@ static int packet_rcv(struct sk_buff *sk
- 	unsigned int snaplen, res;
- 	bool is_drop_n_account = false;
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
--		goto drop;
--
- 	sk = pt->af_packet_priv;
- 	po = pkt_sk(sk);
- 
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
-+		goto drop;
-+
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
- 		goto drop;
- 
-@@ -2220,12 +2222,12 @@ static int tpacket_rcv(struct sk_buff *s
- 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
- 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
--		goto drop;
--
- 	sk = pt->af_packet_priv;
- 	po = pkt_sk(sk);
- 
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
-+		goto drop;
-+
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
- 		goto drop;
- 
-@@ -3339,6 +3341,7 @@ static int packet_create(struct net *net
- 	mutex_init(&po->pg_vec_lock);
- 	po->rollover = NULL;
- 	po->prot_hook.func = packet_rcv;
-+	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
- 
- 	if (sock->type == SOCK_PACKET)
- 		po->prot_hook.func = packet_rcv_spkt;
-@@ -3982,6 +3985,16 @@ packet_setsockopt(struct socket *sock, i
- 		po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
- 		return 0;
- 	}
-+	case PACKET_RECV_TYPE:
-+	{
-+		unsigned int val;
-+		if (optlen != sizeof(val))
-+			return -EINVAL;
-+		if (copy_from_sockptr(&val, optval, sizeof(val)))
-+			return -EFAULT;
-+		po->pkt_type = val & ~BIT(PACKET_LOOPBACK);
-+		return 0;
-+	}
- 	default:
- 		return -ENOPROTOOPT;
- 	}
-@@ -4038,6 +4051,13 @@ static int packet_getsockopt(struct sock
- 	case PACKET_VNET_HDR:
- 		val = po->has_vnet_hdr;
- 		break;
-+	case PACKET_RECV_TYPE:
-+		if (len > sizeof(unsigned int))
-+			len = sizeof(unsigned int);
-+		val = po->pkt_type;
-+
-+		data = &val;
-+		break;
- 	case PACKET_VERSION:
- 		val = po->tp_version;
- 		break;
---- a/net/packet/internal.h
-+++ b/net/packet/internal.h
-@@ -137,6 +137,7 @@ struct packet_sock {
- 	int			(*xmit)(struct sk_buff *skb);
- 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
- 	atomic_t		tp_drops ____cacheline_aligned_in_smp;
-+	unsigned int		pkt_type;
- };
- 
- static struct packet_sock *pkt_sk(struct sock *sk)
diff --git a/target/linux/generic/pending-5.10/655-increase_skb_pad.patch b/target/linux/generic/pending-5.10/655-increase_skb_pad.patch
deleted file mode 100644
index dafafad58814..000000000000
--- a/target/linux/generic/pending-5.10/655-increase_skb_pad.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance
-
-lede-commit: 6f89cffc9add6939d44a6b54cf9a5e77849aa7fd
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/skbuff.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2694,7 +2694,7 @@ static inline int pskb_network_may_pull(
-  * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
-  */
- #ifndef NET_SKB_PAD
--#define NET_SKB_PAD	max(32, L1_CACHE_BYTES)
-+#define NET_SKB_PAD	max(64, L1_CACHE_BYTES)
- #endif
- 
- int ___pskb_trim(struct sk_buff *skb, unsigned int len);
diff --git a/target/linux/generic/pending-5.10/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch b/target/linux/generic/pending-5.10/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
deleted file mode 100644
index 59f202c4c5f6..000000000000
--- a/target/linux/generic/pending-5.10/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
+++ /dev/null
@@ -1,511 +0,0 @@
-From: Steven Barth <steven@midlink.org>
-Subject: Add support for MAP-E FMRs (mesh mode)
-
-MAP-E FMRs (draft-ietf-softwire-map-10) are rules for IPv4-communication
-between MAP CEs (mesh mode) without the need to forward such data to a
-border relay. This is similar to how 6rd works but for IPv4 over IPv6.
-
-Signed-off-by: Steven Barth <cyrus@openwrt.org>
----
- include/net/ip6_tunnel.h       |  13 ++
- include/uapi/linux/if_tunnel.h |  13 ++
- net/ipv6/ip6_tunnel.c          | 276 +++++++++++++++++++++++++++++++++++++++--
- 3 files changed, 291 insertions(+), 11 deletions(-)
-
---- a/include/net/ip6_tunnel.h
-+++ b/include/net/ip6_tunnel.h
-@@ -18,6 +18,18 @@
- /* determine capability on a per-packet basis */
- #define IP6_TNL_F_CAP_PER_PACKET 0x40000
- 
-+/* IPv6 tunnel FMR */
-+struct __ip6_tnl_fmr {
-+	struct __ip6_tnl_fmr *next; /* next fmr in list */
-+	struct in6_addr ip6_prefix;
-+	struct in_addr ip4_prefix;
-+
-+	__u8 ip6_prefix_len;
-+	__u8 ip4_prefix_len;
-+	__u8 ea_len;
-+	__u8 offset;
-+};
-+
- struct __ip6_tnl_parm {
- 	char name[IFNAMSIZ];	/* name of tunnel device */
- 	int link;		/* ifindex of underlying L2 interface */
-@@ -29,6 +41,7 @@ struct __ip6_tnl_parm {
- 	__u32 flags;		/* tunnel flags */
- 	struct in6_addr laddr;	/* local tunnel end-point address */
- 	struct in6_addr raddr;	/* remote tunnel end-point address */
-+	struct __ip6_tnl_fmr *fmrs;	/* FMRs */
- 
- 	__be16			i_flags;
- 	__be16			o_flags;
---- a/include/uapi/linux/if_tunnel.h
-+++ b/include/uapi/linux/if_tunnel.h
-@@ -77,10 +77,23 @@ enum {
- 	IFLA_IPTUN_ENCAP_DPORT,
- 	IFLA_IPTUN_COLLECT_METADATA,
- 	IFLA_IPTUN_FWMARK,
-+	IFLA_IPTUN_FMRS,
- 	__IFLA_IPTUN_MAX,
- };
- #define IFLA_IPTUN_MAX	(__IFLA_IPTUN_MAX - 1)
- 
-+enum {
-+	IFLA_IPTUN_FMR_UNSPEC,
-+	IFLA_IPTUN_FMR_IP6_PREFIX,
-+	IFLA_IPTUN_FMR_IP4_PREFIX,
-+	IFLA_IPTUN_FMR_IP6_PREFIX_LEN,
-+	IFLA_IPTUN_FMR_IP4_PREFIX_LEN,
-+	IFLA_IPTUN_FMR_EA_LEN,
-+	IFLA_IPTUN_FMR_OFFSET,
-+	__IFLA_IPTUN_FMR_MAX,
-+};
-+#define IFLA_IPTUN_FMR_MAX (__IFLA_IPTUN_FMR_MAX - 1)
-+
- enum tunnel_encap_types {
- 	TUNNEL_ENCAP_NONE,
- 	TUNNEL_ENCAP_FOU,
---- a/net/ipv6/ip6_tunnel.c
-+++ b/net/ipv6/ip6_tunnel.c
-@@ -11,6 +11,9 @@
-  *      linux/net/ipv6/sit.c and linux/net/ipv4/ipip.c
-  *
-  *      RFC 2473
-+ *
-+ *      Changes:
-+ *      Steven Barth <cyrus@openwrt.org>:           MAP-E FMR support
-  */
- 
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-@@ -67,9 +70,9 @@ static bool log_ecn_error = true;
- module_param(log_ecn_error, bool, 0644);
- MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN");
- 
--static u32 HASH(const struct in6_addr *addr1, const struct in6_addr *addr2)
-+static u32 HASH(const struct in6_addr *addr)
- {
--	u32 hash = ipv6_addr_hash(addr1) ^ ipv6_addr_hash(addr2);
-+	u32 hash = ipv6_addr_hash(addr);
- 
- 	return hash_32(hash, IP6_TUNNEL_HASH_SIZE_SHIFT);
- }
-@@ -144,17 +147,33 @@ static struct ip6_tnl *
- ip6_tnl_lookup(struct net *net, int link,
- 	       const struct in6_addr *remote, const struct in6_addr *local)
- {
--	unsigned int hash = HASH(remote, local);
-+	unsigned int hash = HASH(local);
- 	struct ip6_tnl *t, *cand = NULL;
- 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
- 	struct in6_addr any;
- 
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- 		if (!ipv6_addr_equal(local, &t->parms.laddr) ||
--		    !ipv6_addr_equal(remote, &t->parms.raddr) ||
- 		    !(t->dev->flags & IFF_UP))
- 			continue;
- 
-+		if (!ipv6_addr_equal(remote, &t->parms.raddr)) {
-+			struct __ip6_tnl_fmr *fmr;
-+			bool found = false;
-+
-+			for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+				if (!ipv6_prefix_equal(remote, &fmr->ip6_prefix,
-+						       fmr->ip6_prefix_len))
-+					continue;
-+
-+				found = true;
-+				break;
-+			}
-+
-+			if (!found)
-+				continue;
-+		}
-+
- 		if (link == t->parms.link)
- 			return t;
- 		else
-@@ -162,7 +181,7 @@ ip6_tnl_lookup(struct net *net, int link
- 	}
- 
- 	memset(&any, 0, sizeof(any));
--	hash = HASH(&any, local);
-+	hash = HASH(local);
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- 		if (!ipv6_addr_equal(local, &t->parms.laddr) ||
- 		    !ipv6_addr_any(&t->parms.raddr) ||
-@@ -175,7 +194,7 @@ ip6_tnl_lookup(struct net *net, int link
- 			cand = t;
- 	}
- 
--	hash = HASH(remote, &any);
-+	hash = HASH(&any);
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- 		if (!ipv6_addr_equal(remote, &t->parms.raddr) ||
- 		    !ipv6_addr_any(&t->parms.laddr) ||
-@@ -223,7 +242,7 @@ ip6_tnl_bucket(struct ip6_tnl_net *ip6n,
- 
- 	if (!ipv6_addr_any(remote) || !ipv6_addr_any(local)) {
- 		prio = 1;
--		h = HASH(remote, local);
-+		h = HASH(local);
- 	}
- 	return &ip6n->tnls[prio][h];
- }
-@@ -405,6 +424,12 @@ ip6_tnl_dev_uninit(struct net_device *de
- 	struct net *net = t->net;
- 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
- 
-+	while (t->parms.fmrs) {
-+		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+		kfree(t->parms.fmrs);
-+		t->parms.fmrs = next;
-+	}
-+
- 	if (dev == ip6n->fb_tnl_dev)
- 		RCU_INIT_POINTER(ip6n->tnls_wc[0], NULL);
- 	else
-@@ -821,6 +846,107 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t,
- }
- EXPORT_SYMBOL_GPL(ip6_tnl_rcv_ctl);
- 
-+/**
-+ * ip4ip6_fmr_calc - calculate target / source IPv6-address based on FMR
-+ *   @dest: destination IPv6 address buffer
-+ *   @skb: received socket buffer
-+ *   @fmr: MAP FMR
-+ *   @xmit: Calculate for xmit or rcv
-+ **/
-+static void ip4ip6_fmr_calc(struct in6_addr *dest,
-+		const struct iphdr *iph, const uint8_t *end,
-+		const struct __ip6_tnl_fmr *fmr, bool xmit)
-+{
-+	int psidlen = fmr->ea_len - (32 - fmr->ip4_prefix_len);
-+	u8 *portp = NULL;
-+	bool use_dest_addr;
-+	const struct iphdr *dsth = iph;
-+
-+	if ((u8*)dsth >= end)
-+		return;
-+
-+	/* find significant IP header */
-+	if (iph->protocol == IPPROTO_ICMP) {
-+		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+		if (ih && ((u8*)&ih[1]) <= end && (
-+			ih->type == ICMP_DEST_UNREACH ||
-+			ih->type == ICMP_SOURCE_QUENCH ||
-+			ih->type == ICMP_TIME_EXCEEDED ||
-+			ih->type == ICMP_PARAMETERPROB ||
-+			ih->type == ICMP_REDIRECT))
-+				dsth = (const struct iphdr*)&ih[1];
-+	}
-+
-+	/* in xmit-path use dest port by default and source port only if
-+		this is an ICMP reply to something else; vice versa in rcv-path */
-+	use_dest_addr = (xmit && dsth == iph) || (!xmit && dsth != iph);
-+
-+	/* get dst port */
-+	if (((u8*)&dsth[1]) <= end && (
-+		dsth->protocol == IPPROTO_UDP ||
-+		dsth->protocol == IPPROTO_TCP ||
-+		dsth->protocol == IPPROTO_SCTP ||
-+		dsth->protocol == IPPROTO_DCCP)) {
-+			/* for UDP, TCP, SCTP and DCCP source and dest port
-+			follow IPv4 header directly */
-+			portp = ((u8*)dsth) + dsth->ihl * 4;
-+
-+			if (use_dest_addr)
-+				portp += sizeof(u16);
-+	} else if (iph->protocol == IPPROTO_ICMP) {
-+		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+
-+		/* use icmp identifier as port */
-+		if (((u8*)&ih) <= end && (
-+		    (use_dest_addr && (
-+		    ih->type == ICMP_ECHOREPLY ||
-+			ih->type == ICMP_TIMESTAMPREPLY ||
-+			ih->type == ICMP_INFO_REPLY ||
-+			ih->type == ICMP_ADDRESSREPLY)) ||
-+			(!use_dest_addr && (
-+			ih->type == ICMP_ECHO ||
-+			ih->type == ICMP_TIMESTAMP ||
-+			ih->type == ICMP_INFO_REQUEST ||
-+			ih->type == ICMP_ADDRESS)
-+			)))
-+				portp = (u8*)&ih->un.echo.id;
-+	}
-+
-+	if ((portp && &portp[2] <= end) || psidlen == 0) {
-+		int frombyte = fmr->ip6_prefix_len / 8;
-+		int fromrem = fmr->ip6_prefix_len % 8;
-+		int bytes = sizeof(struct in6_addr) - frombyte;
-+		const u32 *addr = (use_dest_addr) ? &iph->daddr : &iph->saddr;
-+		u64 eabits = ((u64)ntohl(*addr)) << (32 + fmr->ip4_prefix_len);
-+		u64 t = 0;
-+
-+		/* extract PSID from port and add it to eabits */
-+		u16 psidbits = 0;
-+		if (psidlen > 0) {
-+			psidbits = ((u16)portp[0]) << 8 | ((u16)portp[1]);
-+			psidbits >>= 16 - psidlen - fmr->offset;
-+			psidbits = (u16)(psidbits << (16 - psidlen));
-+			eabits |= ((u64)psidbits) << (48 - (fmr->ea_len - psidlen));
-+		}
-+
-+		/* rewrite destination address */
-+		*dest = fmr->ip6_prefix;
-+		memcpy(&dest->s6_addr[10], addr, sizeof(*addr));
-+		dest->s6_addr16[7] = htons(psidbits >> (16 - psidlen));
-+
-+		if (bytes > sizeof(u64))
-+			bytes = sizeof(u64);
-+
-+		/* insert eabits */
-+		memcpy(&t, &dest->s6_addr[frombyte], bytes);
-+		t = be64_to_cpu(t) & ~(((((u64)1) << fmr->ea_len) - 1)
-+			<< (64 - fmr->ea_len - fromrem));
-+		t = cpu_to_be64(t | (eabits >> fromrem));
-+		memcpy(&dest->s6_addr[frombyte], &t, bytes);
-+	}
-+}
-+
-+
- static int __ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb,
- 			 const struct tnl_ptk_info *tpi,
- 			 struct metadata_dst *tun_dst,
-@@ -873,6 +999,27 @@ static int __ip6_tnl_rcv(struct ip6_tnl
- 	skb_reset_network_header(skb);
- 	memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
- 
-+	if (tpi->proto == htons(ETH_P_IP) && tunnel->parms.fmrs &&
-+		!ipv6_addr_equal(&ipv6h->saddr, &tunnel->parms.raddr)) {
-+			/* Packet didn't come from BR, so lookup FMR */
-+			struct __ip6_tnl_fmr *fmr;
-+			struct in6_addr expected = tunnel->parms.raddr;
-+			for (fmr = tunnel->parms.fmrs; fmr; fmr = fmr->next)
-+				if (ipv6_prefix_equal(&ipv6h->saddr,
-+					&fmr->ip6_prefix, fmr->ip6_prefix_len))
-+						break;
-+
-+			/* Check that IPv6 matches IPv4 source to prevent spoofing */
-+			if (fmr)
-+				ip4ip6_fmr_calc(&expected, ip_hdr(skb),
-+						skb_tail_pointer(skb), fmr, false);
-+
-+			if (!ipv6_addr_equal(&ipv6h->saddr, &expected)) {
-+				rcu_read_unlock();
-+				goto drop;
-+			}
-+	}
-+
- 	__skb_tunnel_rx(skb, tunnel->dev, tunnel->net);
- 
- 	err = dscp_ecn_decapsulate(tunnel, ipv6h, skb);
-@@ -1024,6 +1171,7 @@ static void init_tel_txopt(struct ipv6_t
- 	opt->ops.opt_nflen = 8;
- }
- 
-+
- /**
-  * ip6_tnl_addr_conflict - compare packet addresses to tunnel's own
-  *   @t: the outgoing tunnel device
-@@ -1304,6 +1452,7 @@ ipxip6_tnl_xmit(struct sk_buff *skb, str
- 		u8 protocol)
- {
- 	struct ip6_tnl *t = netdev_priv(dev);
-+	struct __ip6_tnl_fmr *fmr;
- 	struct ipv6hdr *ipv6h;
- 	const struct iphdr  *iph;
- 	int encap_limit = -1;
-@@ -1403,6 +1552,18 @@ ipxip6_tnl_xmit(struct sk_buff *skb, str
- 	fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
- 	dsfield = INET_ECN_encapsulate(dsfield, orig_dsfield);
- 
-+	/* try to find matching FMR */
-+	for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+		unsigned mshift = 32 - fmr->ip4_prefix_len;
-+		if (ntohl(fmr->ip4_prefix.s_addr) >> mshift ==
-+				ntohl(ip_hdr(skb)->daddr) >> mshift)
-+			break;
-+	}
-+
-+	/* change dstaddr according to FMR */
-+	if (fmr)
-+		ip4ip6_fmr_calc(&fl6.daddr, ip_hdr(skb), skb_tail_pointer(skb), fmr, true);
-+
- 	if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
- 		return -1;
- 
-@@ -1556,6 +1717,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
- 	t->parms.link = p->link;
- 	t->parms.proto = p->proto;
- 	t->parms.fwmark = p->fwmark;
-+
-+	while (t->parms.fmrs) {
-+		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+		kfree(t->parms.fmrs);
-+		t->parms.fmrs = next;
-+	}
-+	t->parms.fmrs = p->fmrs;
-+
- 	dst_cache_reset(&t->dst_cache);
- 	ip6_tnl_link_config(t);
- 	return 0;
-@@ -1594,6 +1763,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
- 	p->flowinfo = u->flowinfo;
- 	p->link = u->link;
- 	p->proto = u->proto;
-+	p->fmrs = NULL;
- 	memcpy(p->name, u->name, sizeof(u->name));
- }
- 
-@@ -1979,6 +2149,15 @@ static int ip6_tnl_validate(struct nlatt
- 	return 0;
- }
- 
-+static const struct nla_policy ip6_tnl_fmr_policy[IFLA_IPTUN_FMR_MAX + 1] = {
-+	[IFLA_IPTUN_FMR_IP6_PREFIX] = { .len = sizeof(struct in6_addr) },
-+	[IFLA_IPTUN_FMR_IP4_PREFIX] = { .len = sizeof(struct in_addr) },
-+	[IFLA_IPTUN_FMR_IP6_PREFIX_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_IP4_PREFIX_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_EA_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_OFFSET] = { .type = NLA_U8 }
-+};
-+
- static void ip6_tnl_netlink_parms(struct nlattr *data[],
- 				  struct __ip6_tnl_parm *parms)
- {
-@@ -2016,6 +2195,46 @@ static void ip6_tnl_netlink_parms(struct
- 
- 	if (data[IFLA_IPTUN_FWMARK])
- 		parms->fwmark = nla_get_u32(data[IFLA_IPTUN_FWMARK]);
-+
-+	if (data[IFLA_IPTUN_FMRS]) {
-+		unsigned rem;
-+		struct nlattr *fmr;
-+		nla_for_each_nested(fmr, data[IFLA_IPTUN_FMRS], rem) {
-+			struct nlattr *fmrd[IFLA_IPTUN_FMR_MAX + 1], *c;
-+			struct __ip6_tnl_fmr *nfmr;
-+
-+			nla_parse_nested(fmrd, IFLA_IPTUN_FMR_MAX,
-+				fmr, ip6_tnl_fmr_policy, NULL);
-+
-+			if (!(nfmr = kzalloc(sizeof(*nfmr), GFP_KERNEL)))
-+				continue;
-+
-+			nfmr->offset = 6;
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX]))
-+				nla_memcpy(&nfmr->ip6_prefix, fmrd[IFLA_IPTUN_FMR_IP6_PREFIX],
-+					sizeof(nfmr->ip6_prefix));
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX]))
-+				nla_memcpy(&nfmr->ip4_prefix, fmrd[IFLA_IPTUN_FMR_IP4_PREFIX],
-+					sizeof(nfmr->ip4_prefix));
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX_LEN]))
-+				nfmr->ip6_prefix_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX_LEN]))
-+				nfmr->ip4_prefix_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_EA_LEN]))
-+				nfmr->ea_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_OFFSET]))
-+				nfmr->offset = nla_get_u8(c);
-+
-+			nfmr->next = parms->fmrs;
-+			parms->fmrs = nfmr;
-+		}
-+	}
- }
- 
- static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
-@@ -2131,6 +2350,12 @@ static void ip6_tnl_dellink(struct net_d
- 
- static size_t ip6_tnl_get_size(const struct net_device *dev)
- {
-+	const struct ip6_tnl *t = netdev_priv(dev);
-+	struct __ip6_tnl_fmr *c;
-+	int fmrs = 0;
-+	for (c = t->parms.fmrs; c; c = c->next)
-+		++fmrs;
-+
- 	return
- 		/* IFLA_IPTUN_LINK */
- 		nla_total_size(4) +
-@@ -2160,6 +2385,24 @@ static size_t ip6_tnl_get_size(const str
- 		nla_total_size(0) +
- 		/* IFLA_IPTUN_FWMARK */
- 		nla_total_size(4) +
-+		/* IFLA_IPTUN_FMRS */
-+		nla_total_size(0) +
-+		(
-+			/* nest */
-+			nla_total_size(0) +
-+			/* IFLA_IPTUN_FMR_IP6_PREFIX */
-+			nla_total_size(sizeof(struct in6_addr)) +
-+			/* IFLA_IPTUN_FMR_IP4_PREFIX */
-+			nla_total_size(sizeof(struct in_addr)) +
-+			/* IFLA_IPTUN_FMR_EA_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_IP6_PREFIX_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_IP4_PREFIX_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_OFFSET */
-+			nla_total_size(1)
-+		) * fmrs +
- 		0;
- }
- 
-@@ -2167,6 +2410,9 @@ static int ip6_tnl_fill_info(struct sk_b
- {
- 	struct ip6_tnl *tunnel = netdev_priv(dev);
- 	struct __ip6_tnl_parm *parm = &tunnel->parms;
-+	struct __ip6_tnl_fmr *c;
-+	int fmrcnt = 0;
-+	struct nlattr *fmrs;
- 
- 	if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
- 	    nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
-@@ -2176,9 +2422,27 @@ static int ip6_tnl_fill_info(struct sk_b
- 	    nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
- 	    nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
- 	    nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
--	    nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark))
-+	    nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark) ||
-+	    !(fmrs = nla_nest_start(skb, IFLA_IPTUN_FMRS)))
- 		goto nla_put_failure;
- 
-+	for (c = parm->fmrs; c; c = c->next) {
-+		struct nlattr *fmr = nla_nest_start(skb, ++fmrcnt);
-+		if (!fmr ||
-+			nla_put(skb, IFLA_IPTUN_FMR_IP6_PREFIX,
-+				sizeof(c->ip6_prefix), &c->ip6_prefix) ||
-+			nla_put(skb, IFLA_IPTUN_FMR_IP4_PREFIX,
-+				sizeof(c->ip4_prefix), &c->ip4_prefix) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_IP6_PREFIX_LEN, c->ip6_prefix_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_IP4_PREFIX_LEN, c->ip4_prefix_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_EA_LEN, c->ea_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_OFFSET, c->offset))
-+				goto nla_put_failure;
-+
-+		nla_nest_end(skb, fmr);
-+	}
-+	nla_nest_end(skb, fmrs);
-+
- 	if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
- 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
- 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
-@@ -2218,6 +2482,7 @@ static const struct nla_policy ip6_tnl_p
- 	[IFLA_IPTUN_ENCAP_DPORT]	= { .type = NLA_U16 },
- 	[IFLA_IPTUN_COLLECT_METADATA]	= { .type = NLA_FLAG },
- 	[IFLA_IPTUN_FWMARK]		= { .type = NLA_U32 },
-+	[IFLA_IPTUN_FMRS]		= { .type = NLA_NESTED },
- };
- 
- static struct rtnl_link_ops ip6_link_ops __read_mostly = {
diff --git a/target/linux/generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
deleted file mode 100644
index ac1b327b9e50..000000000000
--- a/target/linux/generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
+++ /dev/null
@@ -1,263 +0,0 @@
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: ipv6: allow rejecting with "source address failed policy"
-
-RFC6204 L-14 requires rejecting traffic from invalid addresses with
-ICMPv6 Destination Unreachable, Code 5 (Source address failed ingress/
-egress policy) on the LAN side, so add an appropriate rule for that.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/net/netns/ipv6.h       |  1 +
- include/uapi/linux/fib_rules.h |  4 +++
- include/uapi/linux/rtnetlink.h |  1 +
- net/ipv4/fib_semantics.c       |  4 +++
- net/ipv4/fib_trie.c            |  1 +
- net/ipv4/ipmr.c                |  1 +
- net/ipv6/fib6_rules.c          |  4 +++
- net/ipv6/ip6mr.c               |  2 ++
- net/ipv6/route.c               | 58 +++++++++++++++++++++++++++++++++++++++++-
- 9 files changed, 75 insertions(+), 1 deletion(-)
-
---- a/include/net/netns/ipv6.h
-+++ b/include/net/netns/ipv6.h
-@@ -88,6 +88,7 @@ struct netns_ipv6 {
- 	unsigned int		fib6_routes_require_src;
- #endif
- 	struct rt6_info         *ip6_prohibit_entry;
-+	struct rt6_info		*ip6_policy_failed_entry;
- 	struct rt6_info         *ip6_blk_hole_entry;
- 	struct fib6_table       *fib6_local_tbl;
- 	struct fib_rules_ops    *fib6_rules_ops;
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -82,6 +82,10 @@ enum {
- 	FR_ACT_BLACKHOLE,	/* Drop without notification */
- 	FR_ACT_UNREACHABLE,	/* Drop with ENETUNREACH */
- 	FR_ACT_PROHIBIT,	/* Drop with EACCES */
-+	FR_ACT_RES9,
-+	FR_ACT_RES10,
-+	FR_ACT_RES11,
-+	FR_ACT_POLICY_FAILED,	/* Drop with EACCES */
- 	__FR_ACT_MAX,
- };
- 
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -249,6 +249,7 @@ enum {
- 	RTN_THROW,		/* Not in this table		*/
- 	RTN_NAT,		/* Translate this address	*/
- 	RTN_XRESOLVE,		/* Use external resolver	*/
-+	RTN_POLICY_FAILED,	/* Failed ingress/egress policy */
- 	__RTN_MAX
- };
- 
---- a/net/ipv4/fib_semantics.c
-+++ b/net/ipv4/fib_semantics.c
-@@ -143,6 +143,10 @@ const struct fib_prop fib_props[RTN_MAX
- 		.error	= -EINVAL,
- 		.scope	= RT_SCOPE_NOWHERE,
- 	},
-+	[RTN_POLICY_FAILED] = {
-+		.error	= -EACCES,
-+		.scope	= RT_SCOPE_UNIVERSE,
-+	},
- };
- 
- static void rt_fibinfo_free(struct rtable __rcu **rtp)
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2736,6 +2736,7 @@ static const char *const rtn_type_names[
- 	[RTN_THROW] = "THROW",
- 	[RTN_NAT] = "NAT",
- 	[RTN_XRESOLVE] = "XRESOLVE",
-+	[RTN_POLICY_FAILED] = "POLICY_FAILED",
- };
- 
- static inline const char *rtn_type(char *buf, size_t len, unsigned int t)
---- a/net/ipv4/ipmr.c
-+++ b/net/ipv4/ipmr.c
-@@ -175,6 +175,7 @@ static int ipmr_rule_action(struct fib_r
- 	case FR_ACT_UNREACHABLE:
- 		return -ENETUNREACH;
- 	case FR_ACT_PROHIBIT:
-+	case FR_ACT_POLICY_FAILED:
- 		return -EACCES;
- 	case FR_ACT_BLACKHOLE:
- 	default:
---- a/net/ipv6/fib6_rules.c
-+++ b/net/ipv6/fib6_rules.c
-@@ -220,6 +220,10 @@ static int __fib6_rule_action(struct fib
- 		err = -EACCES;
- 		rt = net->ipv6.ip6_prohibit_entry;
- 		goto discard_pkt;
-+	case FR_ACT_POLICY_FAILED:
-+		err = -EACCES;
-+		rt = net->ipv6.ip6_policy_failed_entry;
-+		goto discard_pkt;
- 	}
- 
- 	tb_id = fib_rule_get_table(rule, arg);
---- a/net/ipv6/ip6mr.c
-+++ b/net/ipv6/ip6mr.c
-@@ -163,6 +163,8 @@ static int ip6mr_rule_action(struct fib_
- 		return -ENETUNREACH;
- 	case FR_ACT_PROHIBIT:
- 		return -EACCES;
-+	case FR_ACT_POLICY_FAILED:
-+		return -EACCES;
- 	case FR_ACT_BLACKHOLE:
- 	default:
- 		return -EINVAL;
---- a/net/ipv6/route.c
-+++ b/net/ipv6/route.c
-@@ -95,6 +95,8 @@ static int		ip6_pkt_discard(struct sk_bu
- static int		ip6_pkt_discard_out(struct net *net, struct sock *sk, struct sk_buff *skb);
- static int		ip6_pkt_prohibit(struct sk_buff *skb);
- static int		ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb);
-+static int		ip6_pkt_policy_failed(struct sk_buff *skb);
-+static int		ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb);
- static void		ip6_link_failure(struct sk_buff *skb);
- static void		ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
- 					   struct sk_buff *skb, u32 mtu,
-@@ -310,6 +312,18 @@ static const struct rt6_info ip6_prohibi
- 	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
- };
- 
-+static const struct rt6_info ip6_policy_failed_entry_template = {
-+	.dst = {
-+		.__refcnt	= ATOMIC_INIT(1),
-+		.__use		= 1,
-+		.obsolete	= DST_OBSOLETE_FORCE_CHK,
-+		.error		= -EACCES,
-+		.input		= ip6_pkt_policy_failed,
-+		.output		= ip6_pkt_policy_failed_out,
-+	},
-+	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
-+};
-+
- static const struct rt6_info ip6_blk_hole_entry_template = {
- 	.dst = {
- 		.__refcnt	= ATOMIC_INIT(1),
-@@ -1031,6 +1045,7 @@ static const int fib6_prop[RTN_MAX + 1]
- 	[RTN_BLACKHOLE]	= -EINVAL,
- 	[RTN_UNREACHABLE] = -EHOSTUNREACH,
- 	[RTN_PROHIBIT]	= -EACCES,
-+	[RTN_POLICY_FAILED] = -EACCES,
- 	[RTN_THROW]	= -EAGAIN,
- 	[RTN_NAT]	= -EINVAL,
- 	[RTN_XRESOLVE]	= -EINVAL,
-@@ -1066,6 +1081,10 @@ static void ip6_rt_init_dst_reject(struc
- 		rt->dst.output = ip6_pkt_prohibit_out;
- 		rt->dst.input = ip6_pkt_prohibit;
- 		break;
-+	case RTN_POLICY_FAILED:
-+		rt->dst.output = ip6_pkt_policy_failed_out;
-+		rt->dst.input = ip6_pkt_policy_failed;
-+		break;
- 	case RTN_THROW:
- 	case RTN_UNREACHABLE:
- 	default:
-@@ -4449,6 +4468,17 @@ static int ip6_pkt_prohibit_out(struct n
- 	return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
- }
- 
-+static int ip6_pkt_policy_failed(struct sk_buff *skb)
-+{
-+	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_INNOROUTES);
-+}
-+
-+static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb)
-+{
-+	skb->dev = skb_dst(skb)->dev;
-+	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_OUTNOROUTES);
-+}
-+
- /*
-  *	Allocate a dst for local (unicast / anycast) address.
-  */
-@@ -4936,7 +4966,8 @@ static int rtm_to_fib6_config(struct sk_
- 	if (rtm->rtm_type == RTN_UNREACHABLE ||
- 	    rtm->rtm_type == RTN_BLACKHOLE ||
- 	    rtm->rtm_type == RTN_PROHIBIT ||
--	    rtm->rtm_type == RTN_THROW)
-+	    rtm->rtm_type == RTN_THROW ||
-+	    rtm->rtm_type == RTN_POLICY_FAILED)
- 		cfg->fc_flags |= RTF_REJECT;
- 
- 	if (rtm->rtm_type == RTN_LOCAL)
-@@ -6136,6 +6167,8 @@ static int ip6_route_dev_notify(struct n
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 		net->ipv6.ip6_prohibit_entry->dst.dev = dev;
- 		net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
-+		net->ipv6.ip6_policy_failed_entry->dst.dev = dev;
-+		net->ipv6.ip6_policy_failed_entry->rt6i_idev = in6_dev_get(dev);
- 		net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
- 		net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
- #endif
-@@ -6147,6 +6180,7 @@ static int ip6_route_dev_notify(struct n
- 		in6_dev_put_clear(&net->ipv6.ip6_null_entry->rt6i_idev);
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 		in6_dev_put_clear(&net->ipv6.ip6_prohibit_entry->rt6i_idev);
-+		in6_dev_put_clear(&net->ipv6.ip6_policy_failed_entry->rt6i_idev);
- 		in6_dev_put_clear(&net->ipv6.ip6_blk_hole_entry->rt6i_idev);
- #endif
- 	}
-@@ -6338,6 +6372,8 @@ static int __net_init ip6_route_net_init
- 
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 	net->ipv6.fib6_has_custom_rules = false;
-+
-+
- 	net->ipv6.ip6_prohibit_entry = kmemdup(&ip6_prohibit_entry_template,
- 					       sizeof(*net->ipv6.ip6_prohibit_entry),
- 					       GFP_KERNEL);
-@@ -6348,11 +6384,21 @@ static int __net_init ip6_route_net_init
- 			 ip6_template_metrics, true);
- 	INIT_LIST_HEAD(&net->ipv6.ip6_prohibit_entry->rt6i_uncached);
- 
-+	net->ipv6.ip6_policy_failed_entry =
-+				kmemdup(&ip6_policy_failed_entry_template,
-+				sizeof(*net->ipv6.ip6_policy_failed_entry), GFP_KERNEL);
-+	if (!net->ipv6.ip6_policy_failed_entry)
-+		goto out_ip6_prohibit_entry;
-+	net->ipv6.ip6_policy_failed_entry->dst.ops = &net->ipv6.ip6_dst_ops;
-+	dst_init_metrics(&net->ipv6.ip6_policy_failed_entry->dst,
-+			 ip6_template_metrics, true);
-+	INIT_LIST_HEAD(&net->ipv6.ip6_policy_failed_entry->rt6i_uncached);
-+
- 	net->ipv6.ip6_blk_hole_entry = kmemdup(&ip6_blk_hole_entry_template,
- 					       sizeof(*net->ipv6.ip6_blk_hole_entry),
- 					       GFP_KERNEL);
- 	if (!net->ipv6.ip6_blk_hole_entry)
--		goto out_ip6_prohibit_entry;
-+		goto out_ip6_policy_failed_entry;
- 	net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
- 	dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
- 			 ip6_template_metrics, true);
-@@ -6379,6 +6425,8 @@ out:
- 	return ret;
- 
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
-+out_ip6_policy_failed_entry:
-+	kfree(net->ipv6.ip6_policy_failed_entry);
- out_ip6_prohibit_entry:
- 	kfree(net->ipv6.ip6_prohibit_entry);
- out_ip6_null_entry:
-@@ -6398,6 +6446,7 @@ static void __net_exit ip6_route_net_exi
- 	kfree(net->ipv6.ip6_null_entry);
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 	kfree(net->ipv6.ip6_prohibit_entry);
-+	kfree(net->ipv6.ip6_policy_failed_entry);
- 	kfree(net->ipv6.ip6_blk_hole_entry);
- #endif
- 	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
-@@ -6481,6 +6530,9 @@ void __init ip6_route_init_special_entri
- 	init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
- 	init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
- 	init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
-+	init_net.ipv6.ip6_policy_failed_entry->dst.dev = init_net.loopback_dev;
-+	init_net.ipv6.ip6_policy_failed_entry->rt6i_idev =
-+		in6_dev_get(init_net.loopback_dev);
-   #endif
- }
- 
diff --git a/target/linux/generic/pending-5.10/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch b/target/linux/generic/pending-5.10/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
deleted file mode 100644
index 0e7f35db89b5..000000000000
--- a/target/linux/generic/pending-5.10/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: net: provide defines for _POLICY_FAILED until all code is updated
-
-Upstream introduced ICMPV6_POLICY_FAIL for code 5 of destination
-unreachable, conflicting with our name.
-
-Add appropriate defines to allow our code to build with the new
-name until we have updated our local patches for older kernels
-and userspace packages.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/uapi/linux/fib_rules.h | 2 ++
- include/uapi/linux/icmpv6.h    | 2 ++
- include/uapi/linux/rtnetlink.h | 2 ++
- 3 files changed, 6 insertions(+)
-
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -89,6 +89,8 @@ enum {
- 	__FR_ACT_MAX,
- };
- 
-+#define FR_ACT_FAILED_POLICY FR_ACT_POLICY_FAILED
-+
- #define FR_ACT_MAX (__FR_ACT_MAX - 1)
- 
- #endif
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -126,6 +126,8 @@ struct icmp6hdr {
- #define ICMPV6_POLICY_FAIL		5
- #define ICMPV6_REJECT_ROUTE		6
- 
-+#define ICMPV6_FAILED_POLICY		ICMPV6_POLICY_FAIL
-+
- /*
-  *	Codes for Time Exceeded
-  */
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -253,6 +253,8 @@ enum {
- 	__RTN_MAX
- };
- 
-+#define RTN_FAILED_POLICY RTN_POLICY_FAILED
-+
- #define RTN_MAX (__RTN_MAX - 1)
- 
- 
diff --git a/target/linux/generic/pending-5.10/680-NET-skip-GRO-for-foreign-MAC-addresses.patch b/target/linux/generic/pending-5.10/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
deleted file mode 100644
index d948848cc614..000000000000
--- a/target/linux/generic/pending-5.10/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/netdevice.h |  2 ++
- include/linux/skbuff.h    |  3 ++-
- net/core/dev.c            | 48 +++++++++++++++++++++++++++++++++++++++++++++++
- net/ethernet/eth.c        | 18 +++++++++++++++++-
- 4 files changed, 69 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -2059,6 +2059,8 @@ struct net_device {
- 	struct netdev_hw_addr_list	mc;
- 	struct netdev_hw_addr_list	dev_addrs;
- 
-+	unsigned char		local_addr_mask[MAX_ADDR_LEN];
-+
- #ifdef CONFIG_SYSFS
- 	struct kset		*queues_kset;
- #endif
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -864,6 +864,7 @@ struct sk_buff {
- 	__u8			decrypted:1;
- #endif
- 	__u8			scm_io_uring:1;
-+	__u8			gro_skip:1;
- 
- #ifdef CONFIG_NET_SCHED
- 	__u16			tc_index;	/* traffic control index */
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -6069,6 +6069,9 @@ static enum gro_result dev_gro_receive(s
- 	int same_flow;
- 	int grow;
- 
-+	if (skb->gro_skip)
-+		goto normal;
-+
- 	if (netif_elide_gro(skb->dev))
- 		goto normal;
- 
-@@ -8048,6 +8051,48 @@ static void __netdev_adjacent_dev_unlink
- 					   &upper_dev->adj_list.lower);
- }
- 
-+static void __netdev_addr_mask(unsigned char *mask, const unsigned char *addr,
-+			       struct net_device *dev)
-+{
-+	int i;
-+
-+	for (i = 0; i < dev->addr_len; i++)
-+		mask[i] |= addr[i] ^ dev->dev_addr[i];
-+}
-+
-+static void __netdev_upper_mask(unsigned char *mask, struct net_device *dev,
-+				struct net_device *lower)
-+{
-+	struct net_device *cur;
-+	struct list_head *iter;
-+
-+	netdev_for_each_upper_dev_rcu(dev, cur, iter) {
-+		__netdev_addr_mask(mask, cur->dev_addr, lower);
-+		__netdev_upper_mask(mask, cur, lower);
-+	}
-+}
-+
-+static void __netdev_update_addr_mask(struct net_device *dev)
-+{
-+	unsigned char mask[MAX_ADDR_LEN];
-+	struct net_device *cur;
-+	struct list_head *iter;
-+
-+	memset(mask, 0, sizeof(mask));
-+	__netdev_upper_mask(mask, dev, dev);
-+	memcpy(dev->local_addr_mask, mask, dev->addr_len);
-+
-+	netdev_for_each_lower_dev(dev, cur, iter)
-+		__netdev_update_addr_mask(cur);
-+}
-+
-+static void netdev_update_addr_mask(struct net_device *dev)
-+{
-+	rcu_read_lock();
-+	__netdev_update_addr_mask(dev);
-+	rcu_read_unlock();
-+}
-+
- static int __netdev_upper_dev_link(struct net_device *dev,
- 				   struct net_device *upper_dev, bool master,
- 				   void *upper_priv, void *upper_info,
-@@ -8099,6 +8144,7 @@ static int __netdev_upper_dev_link(struc
- 	if (ret)
- 		return ret;
- 
-+	netdev_update_addr_mask(dev);
- 	ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
- 					    &changeupper_info.info);
- 	ret = notifier_to_errno(ret);
-@@ -8195,6 +8241,7 @@ static void __netdev_upper_dev_unlink(st
- 
- 	__netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
- 
-+	netdev_update_addr_mask(dev);
- 	call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
- 				      &changeupper_info.info);
- 
-@@ -8981,6 +9028,7 @@ int dev_set_mac_address(struct net_devic
- 	if (err)
- 		return err;
- 	dev->addr_assign_type = NET_ADDR_SET;
-+	netdev_update_addr_mask(dev);
- 	call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
- 	add_device_randomness(dev->dev_addr, dev->addr_len);
- 	return 0;
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -143,6 +143,18 @@ u32 eth_get_headlen(const struct net_dev
- }
- EXPORT_SYMBOL(eth_get_headlen);
- 
-+static inline bool
-+eth_check_local_mask(const void *addr1, const void *addr2, const void *mask)
-+{
-+	const u16 *a1 = addr1;
-+	const u16 *a2 = addr2;
-+	const u16 *m = mask;
-+
-+	return (((a1[0] ^ a2[0]) & ~m[0]) |
-+		((a1[1] ^ a2[1]) & ~m[1]) |
-+		((a1[2] ^ a2[2]) & ~m[2]));
-+}
-+
- /**
-  * eth_type_trans - determine the packet's protocol ID.
-  * @skb: received socket data
-@@ -174,6 +186,10 @@ __be16 eth_type_trans(struct sk_buff *sk
- 		} else {
- 			skb->pkt_type = PACKET_OTHERHOST;
- 		}
-+
-+		if (eth_check_local_mask(eth->h_dest, dev->dev_addr,
-+					 dev->local_addr_mask))
-+			skb->gro_skip = 1;
- 	}
- 
- 	/*
diff --git a/target/linux/generic/pending-5.10/682-of_net-add-mac-address-increment-support.patch b/target/linux/generic/pending-5.10/682-of_net-add-mac-address-increment-support.patch
deleted file mode 100644
index 82e81f37c538..000000000000
--- a/target/linux/generic/pending-5.10/682-of_net-add-mac-address-increment-support.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From 844c273286f328acf0dab5fbd5d864366b4904dc Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Tue, 30 Mar 2021 18:21:14 +0200
-Subject: [PATCH] of_net: add mac-address-increment support
-
-Lots of embedded devices use the mac-address of other interface
-extracted from nvmem cells and increments it by one or two. Add two
-bindings to integrate this and directly use the right mac-address for
-the interface. Some example are some routers that use the gmac
-mac-address stored in the art partition and increments it by one for the
-wifi. mac-address-increment-byte bindings is used to tell what byte of
-the mac-address has to be increased (if not defined the last byte is
-increased) and mac-address-increment tells how much the byte decided
-early has to be increased.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/of/of_net.c | 43 +++++++++++++++++++++++++++++++++++++++----
- 1 file changed, 39 insertions(+), 4 deletions(-)
-
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -115,27 +115,62 @@ static int of_get_mac_addr_nvmem(struct
-  * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
-  * but is all zeros.
-  *
-+ * DT can tell the system to increment the mac-address after is extracted by
-+ * using:
-+ * - mac-address-increment-byte to decide what byte to increase
-+ *   (if not defined is increased the last byte)
-+ * - mac-address-increment to decide how much to increase. The value WILL
-+ *   overflow to other bytes if the increment is over 255 or the total
-+ *   increment will exceed 255 of the current byte.
-+ *   (example 00:01:02:03:04:ff + 1 == 00:01:02:03:05:00)
-+ *   (example 00:01:02:03:04:fe + 5 == 00:01:02:03:05:03)
-+ *
-  * Return: 0 on success and errno in case of error.
- */
- int of_get_mac_address(struct device_node *np, u8 *addr)
- {
-+	u32 inc_idx, mac_inc, mac_val;
- 	int ret;
- 
-+	/* Check first if the increment byte is present and valid.
-+	 * If not set assume to increment the last byte if found.
-+	 */
-+	if (of_property_read_u32(np, "mac-address-increment-byte", &inc_idx))
-+		inc_idx = 5;
-+	if (inc_idx < 3 || inc_idx > 5)
-+		return -EINVAL;
-+
- 	if (!np)
- 		return -ENODEV;
- 
- 	ret = of_get_mac_addr(np, "mac-address", addr);
- 	if (!ret)
--		return 0;
-+		goto found;
- 
- 	ret = of_get_mac_addr(np, "local-mac-address", addr);
- 	if (!ret)
--		return 0;
-+		goto found;
- 
- 	ret = of_get_mac_addr(np, "address", addr);
- 	if (!ret)
--		return 0;
-+		goto found;
-+
-+	ret = of_get_mac_addr_nvmem(np, addr);
-+	if (ret)
-+		return ret;
-+
-+found:
-+	if (!of_property_read_u32(np, "mac-address-increment", &mac_inc)) {
-+		/* Convert to a contiguous value */
-+		mac_val = (addr[3] << 16) + (addr[4] << 8) + addr[5];
-+		mac_val += mac_inc << 8 * (5-inc_idx);
-+
-+		/* Apply the incremented value handling overflow case */
-+		addr[3] = (mac_val >> 16) & 0xff;
-+		addr[4] = (mac_val >> 8) & 0xff;
-+		addr[5] = (mac_val >> 0) & 0xff;
-+	}
- 
--	return of_get_mac_addr_nvmem(np, addr);
-+	return ret;
- }
- EXPORT_SYMBOL(of_get_mac_address);
diff --git a/target/linux/generic/pending-5.10/683-of_net-add-mac-address-to-of-tree.patch b/target/linux/generic/pending-5.10/683-of_net-add-mac-address-to-of-tree.patch
deleted file mode 100644
index 501422551b1d..000000000000
--- a/target/linux/generic/pending-5.10/683-of_net-add-mac-address-to-of-tree.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From: David Bauer <mail@david-bauer.net>
-Subject: of/net: Add MAC address to of tree
-
-The label-mac logic relies on the mac-address property of a netdev
-devices of-node. However, the mac address can also be stored as a
-different property or read from e.g. an mtd device.
-
-Create this node when reading a mac-address from OF if it does not
-already exist and copy the mac-address used for the device to this
-property. This way, the MAC address can be accessed using procfs.
-
-Submitted-by: David Bauer <mail@david-bauer.net>
----
- drivers/of/of_net.c                           | 22 ++++++++++++++
- 1 files changed, 22 insertions(+)
-
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -95,6 +95,27 @@ static int of_get_mac_addr_nvmem(struct
- 	return 0;
- }
- 
-+static int of_add_mac_address(struct device_node *np, u8* addr)
-+{
-+	struct property *prop;
-+
-+	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
-+	if (!prop)
-+		return -ENOMEM;
-+
-+	prop->name = "mac-address";
-+	prop->length = ETH_ALEN;
-+	prop->value = kmemdup(addr, ETH_ALEN, GFP_KERNEL);
-+	if (!prop->value || of_update_property(np, prop))
-+		goto free;
-+
-+	return 0;
-+free:
-+	kfree(prop->value);
-+	kfree(prop);
-+	return -ENOMEM;
-+}
-+
- /**
-  * Search the device tree for the best MAC address to use.  'mac-address' is
-  * checked first, because that is supposed to contain to "most recent" MAC
-@@ -171,6 +192,7 @@ found:
- 		addr[5] = (mac_val >> 0) & 0xff;
- 	}
- 
-+	of_add_mac_address(np, addr);
- 	return ret;
- }
- EXPORT_SYMBOL(of_get_mac_address);
diff --git a/target/linux/generic/pending-5.10/684-of_net-do-mac-address-increment-only-once.patch b/target/linux/generic/pending-5.10/684-of_net-do-mac-address-increment-only-once.patch
deleted file mode 100644
index b1c5d9112afb..000000000000
--- a/target/linux/generic/pending-5.10/684-of_net-do-mac-address-increment-only-once.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From dd07dd394d8bfdb5d527fab18ca54f20815ec4e4 Mon Sep 17 00:00:00 2001
-From: Will Moss <willormos@gmail.com>
-Date: Wed, 3 Aug 2022 13:48:55 +0000
-Subject: [PATCH] of_net: do mac-address-increment only once
-
-Remove mac-address-increment and mac-address-increment-byte
-DT property after incrementing process to make sure MAC address
-would not get incremented more if this function is stared again.
-It could happen if device initialization is deferred after
-unsuccessful attempt.
-
-Signed-off-by: Will Moss <willormos@gmail.com>
----
- drivers/of/of_net.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -190,6 +190,12 @@ found:
- 		addr[3] = (mac_val >> 16) & 0xff;
- 		addr[4] = (mac_val >> 8) & 0xff;
- 		addr[5] = (mac_val >> 0) & 0xff;
-+
-+		/* Remove mac-address-increment and mac-address-increment-byte
-+		 * DT property to make sure MAC address would not get incremented
-+		 * more if this function is stared again. */
-+		of_remove_property(np, of_find_property(np, "mac-address-increment", NULL));
-+		of_remove_property(np, of_find_property(np, "mac-address-increment-byte", NULL));
- 	}
- 
- 	of_add_mac_address(np, addr);
diff --git a/target/linux/generic/pending-5.10/700-net-ethernet-mtk_eth_soc-avoid-creating-duplicate-of.patch b/target/linux/generic/pending-5.10/700-net-ethernet-mtk_eth_soc-avoid-creating-duplicate-of.patch
deleted file mode 100644
index ff090f07f1bc..000000000000
--- a/target/linux/generic/pending-5.10/700-net-ethernet-mtk_eth_soc-avoid-creating-duplicate-of.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 8 Jul 2021 07:08:29 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: avoid creating duplicate offload
- entries
-
-Sometimes multiple CLS_REPLACE calls are issued for the same connection.
-rhashtable_insert_fast does not check for these duplicates, so multiple
-hardware flow entries can be created.
-Fix this by checking for an existing entry early
-
-Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -187,6 +187,9 @@ mtk_flow_offload_replace(struct mtk_eth
- 	int hash;
- 	int i;
- 
-+	if (rhashtable_lookup(&eth->flow_table, &f->cookie, mtk_flow_ht_params))
-+		return -EEXIST;
-+
- 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_META)) {
- 		struct flow_match_meta match;
- 
diff --git a/target/linux/generic/pending-5.10/701-00-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch b/target/linux/generic/pending-5.10/701-00-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch
deleted file mode 100644
index c7bb6c5e10b0..000000000000
--- a/target/linux/generic/pending-5.10/701-00-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch
+++ /dev/null
@@ -1,327 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 5 Feb 2022 17:59:07 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: add support for coherent
- DMA
-
-It improves performance by eliminating the need for a cache flush on rx and tx
-In preparation for supporting WED (Wireless Ethernet Dispatch), also add a
-function for disabling coherent DMA at runtime.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -9,6 +9,7 @@
- #include <linux/of_device.h>
- #include <linux/of_mdio.h>
- #include <linux/of_net.h>
-+#include <linux/of_address.h>
- #include <linux/mfd/syscon.h>
- #include <linux/regmap.h>
- #include <linux/clk.h>
-@@ -833,7 +834,7 @@ static int mtk_init_fq_dma(struct mtk_et
- 	dma_addr_t dma_addr;
- 	int i;
- 
--	eth->scratch_ring = dma_alloc_coherent(eth->dev,
-+	eth->scratch_ring = dma_alloc_coherent(eth->dma_dev,
- 					       cnt * sizeof(struct mtk_tx_dma),
- 					       &eth->phy_scratch_ring,
- 					       GFP_ATOMIC);
-@@ -845,10 +846,10 @@ static int mtk_init_fq_dma(struct mtk_et
- 	if (unlikely(!eth->scratch_head))
- 		return -ENOMEM;
- 
--	dma_addr = dma_map_single(eth->dev,
-+	dma_addr = dma_map_single(eth->dma_dev,
- 				  eth->scratch_head, cnt * MTK_QDMA_PAGE_SIZE,
- 				  DMA_FROM_DEVICE);
--	if (unlikely(dma_mapping_error(eth->dev, dma_addr)))
-+	if (unlikely(dma_mapping_error(eth->dma_dev, dma_addr)))
- 		return -ENOMEM;
- 
- 	phy_ring_tail = eth->phy_scratch_ring +
-@@ -902,26 +903,26 @@ static void mtk_tx_unmap(struct mtk_eth
- {
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
- 		if (tx_buf->flags & MTK_TX_FLAGS_SINGLE0) {
--			dma_unmap_single(eth->dev,
-+			dma_unmap_single(eth->dma_dev,
- 					 dma_unmap_addr(tx_buf, dma_addr0),
- 					 dma_unmap_len(tx_buf, dma_len0),
- 					 DMA_TO_DEVICE);
- 		} else if (tx_buf->flags & MTK_TX_FLAGS_PAGE0) {
--			dma_unmap_page(eth->dev,
-+			dma_unmap_page(eth->dma_dev,
- 				       dma_unmap_addr(tx_buf, dma_addr0),
- 				       dma_unmap_len(tx_buf, dma_len0),
- 				       DMA_TO_DEVICE);
- 		}
- 	} else {
- 		if (dma_unmap_len(tx_buf, dma_len0)) {
--			dma_unmap_page(eth->dev,
-+			dma_unmap_page(eth->dma_dev,
- 				       dma_unmap_addr(tx_buf, dma_addr0),
- 				       dma_unmap_len(tx_buf, dma_len0),
- 				       DMA_TO_DEVICE);
- 		}
- 
- 		if (dma_unmap_len(tx_buf, dma_len1)) {
--			dma_unmap_page(eth->dev,
-+			dma_unmap_page(eth->dma_dev,
- 				       dma_unmap_addr(tx_buf, dma_addr1),
- 				       dma_unmap_len(tx_buf, dma_len1),
- 				       DMA_TO_DEVICE);
-@@ -999,9 +1000,9 @@ static int mtk_tx_map(struct sk_buff *sk
- 	if (skb_vlan_tag_present(skb))
- 		txd4 |= TX_DMA_INS_VLAN | skb_vlan_tag_get(skb);
- 
--	mapped_addr = dma_map_single(eth->dev, skb->data,
-+	mapped_addr = dma_map_single(eth->dma_dev, skb->data,
- 				     skb_headlen(skb), DMA_TO_DEVICE);
--	if (unlikely(dma_mapping_error(eth->dev, mapped_addr)))
-+	if (unlikely(dma_mapping_error(eth->dma_dev, mapped_addr)))
- 		return -ENOMEM;
- 
- 	WRITE_ONCE(itxd->txd1, mapped_addr);
-@@ -1040,10 +1041,10 @@ static int mtk_tx_map(struct sk_buff *sk
- 
- 
- 			frag_map_size = min(frag_size, MTK_TX_DMA_BUF_LEN);
--			mapped_addr = skb_frag_dma_map(eth->dev, frag, offset,
-+			mapped_addr = skb_frag_dma_map(eth->dma_dev, frag, offset,
- 						       frag_map_size,
- 						       DMA_TO_DEVICE);
--			if (unlikely(dma_mapping_error(eth->dev, mapped_addr)))
-+			if (unlikely(dma_mapping_error(eth->dma_dev, mapped_addr)))
- 				goto err_dma;
- 
- 			if (i == nr_frags - 1 &&
-@@ -1324,18 +1325,18 @@ static int mtk_poll_rx(struct napi_struc
- 			netdev->stats.rx_dropped++;
- 			goto release_desc;
- 		}
--		dma_addr = dma_map_single(eth->dev,
-+		dma_addr = dma_map_single(eth->dma_dev,
- 					  new_data + NET_SKB_PAD +
- 					  eth->ip_align,
- 					  ring->buf_size,
- 					  DMA_FROM_DEVICE);
--		if (unlikely(dma_mapping_error(eth->dev, dma_addr))) {
-+		if (unlikely(dma_mapping_error(eth->dma_dev, dma_addr))) {
- 			skb_free_frag(new_data);
- 			netdev->stats.rx_dropped++;
- 			goto release_desc;
- 		}
- 
--		dma_unmap_single(eth->dev, trxd.rxd1,
-+		dma_unmap_single(eth->dma_dev, trxd.rxd1,
- 				 ring->buf_size, DMA_FROM_DEVICE);
- 
- 		/* receive data */
-@@ -1608,7 +1609,7 @@ static int mtk_tx_alloc(struct mtk_eth *
- 	if (!ring->buf)
- 		goto no_tx_mem;
- 
--	ring->dma = dma_alloc_coherent(eth->dev, MTK_DMA_SIZE * sz,
-+	ring->dma = dma_alloc_coherent(eth->dma_dev, MTK_DMA_SIZE * sz,
- 				       &ring->phys, GFP_ATOMIC);
- 	if (!ring->dma)
- 		goto no_tx_mem;
-@@ -1626,7 +1627,7 @@ static int mtk_tx_alloc(struct mtk_eth *
- 	 * descriptors in ring->dma_pdma.
- 	 */
- 	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
--		ring->dma_pdma = dma_alloc_coherent(eth->dev, MTK_DMA_SIZE * sz,
-+		ring->dma_pdma = dma_alloc_coherent(eth->dma_dev, MTK_DMA_SIZE * sz,
- 						    &ring->phys_pdma,
- 						    GFP_ATOMIC);
- 		if (!ring->dma_pdma)
-@@ -1685,7 +1686,7 @@ static void mtk_tx_clean(struct mtk_eth
- 	}
- 
- 	if (ring->dma) {
--		dma_free_coherent(eth->dev,
-+		dma_free_coherent(eth->dma_dev,
- 				  MTK_DMA_SIZE * sizeof(*ring->dma),
- 				  ring->dma,
- 				  ring->phys);
-@@ -1693,7 +1694,7 @@ static void mtk_tx_clean(struct mtk_eth
- 	}
- 
- 	if (ring->dma_pdma) {
--		dma_free_coherent(eth->dev,
-+		dma_free_coherent(eth->dma_dev,
- 				  MTK_DMA_SIZE * sizeof(*ring->dma_pdma),
- 				  ring->dma_pdma,
- 				  ring->phys_pdma);
-@@ -1741,18 +1742,18 @@ static int mtk_rx_alloc(struct mtk_eth *
- 			return -ENOMEM;
- 	}
- 
--	ring->dma = dma_alloc_coherent(eth->dev,
-+	ring->dma = dma_alloc_coherent(eth->dma_dev,
- 				       rx_dma_size * sizeof(*ring->dma),
- 				       &ring->phys, GFP_ATOMIC);
- 	if (!ring->dma)
- 		return -ENOMEM;
- 
- 	for (i = 0; i < rx_dma_size; i++) {
--		dma_addr_t dma_addr = dma_map_single(eth->dev,
-+		dma_addr_t dma_addr = dma_map_single(eth->dma_dev,
- 				ring->data[i] + NET_SKB_PAD + eth->ip_align,
- 				ring->buf_size,
- 				DMA_FROM_DEVICE);
--		if (unlikely(dma_mapping_error(eth->dev, dma_addr)))
-+		if (unlikely(dma_mapping_error(eth->dma_dev, dma_addr)))
- 			return -ENOMEM;
- 		ring->dma[i].rxd1 = (unsigned int)dma_addr;
- 
-@@ -1788,7 +1789,7 @@ static void mtk_rx_clean(struct mtk_eth
- 				continue;
- 			if (!ring->dma[i].rxd1)
- 				continue;
--			dma_unmap_single(eth->dev,
-+			dma_unmap_single(eth->dma_dev,
- 					 ring->dma[i].rxd1,
- 					 ring->buf_size,
- 					 DMA_FROM_DEVICE);
-@@ -1799,7 +1800,7 @@ static void mtk_rx_clean(struct mtk_eth
- 	}
- 
- 	if (ring->dma) {
--		dma_free_coherent(eth->dev,
-+		dma_free_coherent(eth->dma_dev,
- 				  ring->dma_size * sizeof(*ring->dma),
- 				  ring->dma,
- 				  ring->phys);
-@@ -2155,7 +2156,7 @@ static void mtk_dma_free(struct mtk_eth
- 		if (eth->netdev[i])
- 			netdev_reset_queue(eth->netdev[i]);
- 	if (eth->scratch_ring) {
--		dma_free_coherent(eth->dev,
-+		dma_free_coherent(eth->dma_dev,
- 				  MTK_DMA_SIZE * sizeof(struct mtk_tx_dma),
- 				  eth->scratch_ring,
- 				  eth->phy_scratch_ring);
-@@ -2507,6 +2508,8 @@ static void mtk_dim_tx(struct work_struc
- 
- static int mtk_hw_init(struct mtk_eth *eth)
- {
-+	u32 dma_mask = ETHSYS_DMA_AG_MAP_PDMA | ETHSYS_DMA_AG_MAP_QDMA |
-+		       ETHSYS_DMA_AG_MAP_PPE;
- 	int i, val, ret;
- 
- 	if (test_and_set_bit(MTK_HW_INIT, &eth->state))
-@@ -2519,6 +2522,10 @@ static int mtk_hw_init(struct mtk_eth *e
- 	if (ret)
- 		goto err_disable_pm;
- 
-+	if (eth->ethsys)
-+		regmap_update_bits(eth->ethsys, ETHSYS_DMA_AG_MAP, dma_mask,
-+				   of_dma_is_coherent(eth->dma_dev->of_node) * dma_mask);
-+
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
- 		ret = device_reset(eth->dev);
- 		if (ret) {
-@@ -3068,6 +3075,35 @@ free_netdev:
- 	return err;
- }
- 
-+void mtk_eth_set_dma_device(struct mtk_eth *eth, struct device *dma_dev)
-+{
-+	struct net_device *dev, *tmp;
-+	LIST_HEAD(dev_list);
-+	int i;
-+
-+	rtnl_lock();
-+
-+	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+		dev = eth->netdev[i];
-+
-+		if (!dev || !(dev->flags & IFF_UP))
-+			continue;
-+
-+		list_add_tail(&dev->close_list, &dev_list);
-+	}
-+
-+	dev_close_many(&dev_list, false);
-+
-+	eth->dma_dev = dma_dev;
-+
-+	list_for_each_entry_safe(dev, tmp, &dev_list, close_list) {
-+		list_del_init(&dev->close_list);
-+		dev_open(dev, NULL);
-+	}
-+
-+	rtnl_unlock();
-+}
-+
- static int mtk_probe(struct platform_device *pdev)
- {
- 	struct device_node *mac_np;
-@@ -3081,6 +3117,7 @@ static int mtk_probe(struct platform_dev
- 	eth->soc = of_device_get_match_data(&pdev->dev);
- 
- 	eth->dev = &pdev->dev;
-+	eth->dma_dev = &pdev->dev;
- 	eth->base = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(eth->base))
- 		return PTR_ERR(eth->base);
-@@ -3129,6 +3166,16 @@ static int mtk_probe(struct platform_dev
- 		}
- 	}
- 
-+	if (of_dma_is_coherent(pdev->dev.of_node)) {
-+		struct regmap *cci;
-+
-+		cci = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+						      "mediatek,cci-control");
-+		/* enable CPU/bus coherency */
-+		if (!IS_ERR(cci))
-+			regmap_write(cci, 0, 3);
-+	}
-+
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SGMII)) {
- 		eth->sgmii = devm_kzalloc(eth->dev, sizeof(*eth->sgmii),
- 					  GFP_KERNEL);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -457,6 +457,12 @@
- #define RSTCTRL_FE		BIT(6)
- #define RSTCTRL_PPE		BIT(31)
- 
-+/* ethernet dma channel agent map */
-+#define ETHSYS_DMA_AG_MAP	0x408
-+#define ETHSYS_DMA_AG_MAP_PDMA	BIT(0)
-+#define ETHSYS_DMA_AG_MAP_QDMA	BIT(1)
-+#define ETHSYS_DMA_AG_MAP_PPE	BIT(2)
-+
- /* SGMII subsystem config registers */
- /* Register to auto-negotiation restart */
- #define SGMSYS_PCS_CONTROL_1	0x0
-@@ -874,6 +880,7 @@ struct mtk_sgmii {
- /* struct mtk_eth -	This is the main datasructure for holding the state
-  *			of the driver
-  * @dev:		The device pointer
-+ * @dev:		The device pointer used for dma mapping/alloc
-  * @base:		The mapped register i/o base
-  * @page_lock:		Make sure that register operations are atomic
-  * @tx_irq__lock:	Make sure that IRQ register operations are atomic
-@@ -917,6 +924,7 @@ struct mtk_sgmii {
- 
- struct mtk_eth {
- 	struct device			*dev;
-+	struct device			*dma_dev;
- 	void __iomem			*base;
- 	spinlock_t			page_lock;
- 	spinlock_t			tx_irq_lock;
-@@ -1015,6 +1023,7 @@ int mtk_gmac_rgmii_path_setup(struct mtk
- int mtk_eth_offload_init(struct mtk_eth *eth);
- int mtk_eth_setup_tc(struct net_device *dev, enum tc_setup_type type,
- 		     void *type_data);
-+void mtk_eth_set_dma_device(struct mtk_eth *eth, struct device *dma_dev);
- 
- 
- #endif /* MTK_ETH_H */
diff --git a/target/linux/generic/pending-5.10/701-01-arm64-dts-mediatek-mt7622-add-support-for-coherent-D.patch b/target/linux/generic/pending-5.10/701-01-arm64-dts-mediatek-mt7622-add-support-for-coherent-D.patch
deleted file mode 100644
index d9015d4805da..000000000000
--- a/target/linux/generic/pending-5.10/701-01-arm64-dts-mediatek-mt7622-add-support-for-coherent-D.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 7 Feb 2022 10:27:22 +0100
-Subject: [PATCH] arm64: dts: mediatek: mt7622: add support for coherent
- DMA
-
-It improves performance by eliminating the need for a cache flush on rx and tx
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -357,7 +357,7 @@
- 		};
- 
- 		cci_control2: slave-if@5000 {
--			compatible = "arm,cci-400-ctrl-if";
-+			compatible = "arm,cci-400-ctrl-if", "syscon";
- 			interface-type = "ace";
- 			reg = <0x5000 0x1000>;
- 		};
-@@ -937,6 +937,8 @@
- 		power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
- 		mediatek,ethsys = <&ethsys>;
- 		mediatek,sgmiisys = <&sgmiisys>;
-+		mediatek,cci-control = <&cci_control2>;
-+		dma-coherent;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 		status = "disabled";
diff --git a/target/linux/generic/pending-5.10/701-02-net-ethernet-mtk_eth_soc-add-support-for-Wireless-Et.patch b/target/linux/generic/pending-5.10/701-02-net-ethernet-mtk_eth_soc-add-support-for-Wireless-Et.patch
deleted file mode 100644
index cd4adb94fd08..000000000000
--- a/target/linux/generic/pending-5.10/701-02-net-ethernet-mtk_eth_soc-add-support-for-Wireless-Et.patch
+++ /dev/null
@@ -1,1679 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 5 Feb 2022 17:56:08 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: add support for Wireless
- Ethernet Dispatch (WED)
-
-The Wireless Ethernet Dispatch subsystem on the MT7622 SoC can be
-configured to intercept and handle access to the DMA queues and
-PCIe interrupts for a MT7615/MT7915 wireless card.
-It can manage the internal WDMA (Wireless DMA) controller, which allows
-ethernet packets to be passed from the packet switch engine (PSE) to the
-wireless card, bypassing the CPU entirely.
-This can be used to implement hardware flow offloading from ethernet to
-WLAN.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- create mode 100644 drivers/net/ethernet/mediatek/mtk_wed.c
- create mode 100644 drivers/net/ethernet/mediatek/mtk_wed.h
- create mode 100644 drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
- create mode 100644 drivers/net/ethernet/mediatek/mtk_wed_ops.c
- create mode 100644 drivers/net/ethernet/mediatek/mtk_wed_regs.h
- create mode 100644 include/linux/soc/mediatek/mtk_wed.h
-
---- a/drivers/net/ethernet/mediatek/Kconfig
-+++ b/drivers/net/ethernet/mediatek/Kconfig
-@@ -7,6 +7,10 @@ config NET_VENDOR_MEDIATEK
- 
- if NET_VENDOR_MEDIATEK
- 
-+config NET_MEDIATEK_SOC_WED
-+	depends on ARCH_MEDIATEK || COMPILE_TEST
-+	def_bool NET_MEDIATEK_SOC != n
-+
- config NET_MEDIATEK_SOC
- 	tristate "MediaTek SoC Gigabit Ethernet support"
- 	select PHYLINK
---- a/drivers/net/ethernet/mediatek/Makefile
-+++ b/drivers/net/ethernet/mediatek/Makefile
-@@ -5,4 +5,9 @@
- 
- obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o
- mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o mtk_ppe_offload.o
-+mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed.o
-+ifdef CONFIG_DEBUG_FS
-+mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed_debugfs.o
-+endif
-+obj-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed_ops.o
- obj-$(CONFIG_NET_MEDIATEK_STAR_EMAC) += mtk_star_emac.o
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -24,6 +24,7 @@
- #include <net/dsa.h>
- 
- #include "mtk_eth_soc.h"
-+#include "mtk_wed.h"
- 
- static int mtk_msg_level = -1;
- module_param_named(msg_level, mtk_msg_level, int, 0);
-@@ -3198,6 +3199,22 @@ static int mtk_probe(struct platform_dev
- 		}
- 	}
- 
-+	for (i = 0;; i++) {
-+		struct device_node *np = of_parse_phandle(pdev->dev.of_node,
-+							  "mediatek,wed", i);
-+		static const u32 wdma_regs[] = {
-+			MTK_WDMA0_BASE,
-+			MTK_WDMA1_BASE
-+		};
-+		void __iomem *wdma;
-+
-+		if (!np || i >= ARRAY_SIZE(wdma_regs))
-+			break;
-+
-+		wdma = eth->base + wdma_regs[i];
-+		mtk_wed_add_hw(np, eth, wdma, i);
-+	}
-+
- 	for (i = 0; i < 3; i++) {
- 		if (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_INT) && i > 0)
- 			eth->irq[i] = eth->irq[0];
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -295,6 +295,9 @@
- #define MTK_GDM1_TX_GPCNT	0x2438
- #define MTK_STAT_OFFSET		0x40
- 
-+#define MTK_WDMA0_BASE		0x2800
-+#define MTK_WDMA1_BASE		0x2c00
-+
- /* QDMA descriptor txd4 */
- #define TX_DMA_CHKSUM		(0x7 << 29)
- #define TX_DMA_TSO		BIT(28)
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -0,0 +1,875 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2021 Felix Fietkau <nbd@nbd.name> */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/bitfield.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/skbuff.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_address.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/debugfs.h>
-+#include <linux/soc/mediatek/mtk_wed.h>
-+#include "mtk_eth_soc.h"
-+#include "mtk_wed_regs.h"
-+#include "mtk_wed.h"
-+#include "mtk_ppe.h"
-+
-+#define MTK_PCIE_BASE(n)		(0x1a143000 + (n) * 0x2000)
-+
-+#define MTK_WED_PKT_SIZE		1900
-+#define MTK_WED_BUF_SIZE		2048
-+#define MTK_WED_BUF_PER_PAGE		(PAGE_SIZE / 2048)
-+
-+#define MTK_WED_TX_RING_SIZE		2048
-+#define MTK_WED_WDMA_RING_SIZE		1024
-+
-+static struct mtk_wed_hw *hw_list[2];
-+static DEFINE_MUTEX(hw_lock);
-+
-+static void
-+wed_m32(struct mtk_wed_device *dev, u32 reg, u32 mask, u32 val)
-+{
-+	regmap_update_bits(dev->hw->regs, reg, mask | val, val);
-+}
-+
-+static void
-+wed_set(struct mtk_wed_device *dev, u32 reg, u32 mask)
-+{
-+	return wed_m32(dev, reg, 0, mask);
-+}
-+
-+static void
-+wed_clr(struct mtk_wed_device *dev, u32 reg, u32 mask)
-+{
-+	return wed_m32(dev, reg, mask, 0);
-+}
-+
-+static void
-+wdma_m32(struct mtk_wed_device *dev, u32 reg, u32 mask, u32 val)
-+{
-+	wdma_w32(dev, reg, (wdma_r32(dev, reg) & ~mask) | val);
-+}
-+
-+static void
-+wdma_set(struct mtk_wed_device *dev, u32 reg, u32 mask)
-+{
-+	wdma_m32(dev, reg, 0, mask);
-+}
-+
-+static u32
-+mtk_wed_read_reset(struct mtk_wed_device *dev)
-+{
-+	return wed_r32(dev, MTK_WED_RESET);
-+}
-+
-+static void
-+mtk_wed_reset(struct mtk_wed_device *dev, u32 mask)
-+{
-+	u32 status;
-+
-+	wed_w32(dev, MTK_WED_RESET, mask);
-+	if (readx_poll_timeout(mtk_wed_read_reset, dev, status,
-+			       !(status & mask), 0, 1000))
-+		WARN_ON_ONCE(1);
-+}
-+
-+static struct mtk_wed_hw *
-+mtk_wed_assign(struct mtk_wed_device *dev)
-+{
-+	struct mtk_wed_hw *hw;
-+
-+	hw = hw_list[pci_domain_nr(dev->wlan.pci_dev->bus)];
-+	if (!hw || hw->wed_dev)
-+		return NULL;
-+
-+	hw->wed_dev = dev;
-+	return hw;
-+}
-+
-+static int
-+mtk_wed_buffer_alloc(struct mtk_wed_device *dev)
-+{
-+	struct mtk_wdma_desc *desc;
-+	dma_addr_t desc_phys;
-+	void **page_list;
-+	int token = dev->wlan.token_start;
-+	int ring_size;
-+	int n_pages;
-+	int i, page_idx;
-+
-+	ring_size = dev->wlan.nbuf & ~(MTK_WED_BUF_PER_PAGE - 1);
-+	n_pages = ring_size / MTK_WED_BUF_PER_PAGE;
-+
-+	page_list = kcalloc(n_pages, sizeof(*page_list), GFP_KERNEL);
-+	if (!page_list)
-+		return -ENOMEM;
-+
-+	dev->buf_ring.size = ring_size;
-+	dev->buf_ring.pages = page_list;
-+
-+	desc = dma_alloc_coherent(dev->hw->dev, ring_size * sizeof(*desc),
-+				  &desc_phys, GFP_KERNEL);
-+	if (!desc)
-+		return -ENOMEM;
-+
-+	dev->buf_ring.desc = desc;
-+	dev->buf_ring.desc_phys = desc_phys;
-+
-+	for (i = 0, page_idx = 0; i < ring_size; i += MTK_WED_BUF_PER_PAGE) {
-+		dma_addr_t page_phys, buf_phys;
-+		struct page *page;
-+		void *buf;
-+		int s;
-+
-+		page = __dev_alloc_pages(GFP_KERNEL, 0);
-+		if (!page)
-+			return -ENOMEM;
-+
-+		page_phys = dma_map_page(dev->hw->dev, page, 0, PAGE_SIZE,
-+					 DMA_BIDIRECTIONAL);
-+		if (dma_mapping_error(dev->hw->dev, page_phys)) {
-+			__free_page(page);
-+			return -ENOMEM;
-+		}
-+
-+		page_list[page_idx++] = page;
-+		dma_sync_single_for_cpu(dev->hw->dev, page_phys, PAGE_SIZE,
-+					DMA_BIDIRECTIONAL);
-+
-+		buf = page_to_virt(page);
-+		buf_phys = page_phys;
-+
-+		for (s = 0; s < MTK_WED_BUF_PER_PAGE; s++) {
-+			u32 txd_size;
-+
-+			txd_size = dev->wlan.init_buf(buf, buf_phys, token++);
-+
-+			desc->buf0 = buf_phys;
-+			desc->buf1 = buf_phys + txd_size;
-+			desc->ctrl = FIELD_PREP(MTK_WDMA_DESC_CTRL_LEN0,
-+						txd_size) |
-+				     FIELD_PREP(MTK_WDMA_DESC_CTRL_LEN1,
-+						MTK_WED_BUF_SIZE - txd_size) |
-+				     MTK_WDMA_DESC_CTRL_LAST_SEG1;
-+			desc->info = 0;
-+			desc++;
-+
-+			buf += MTK_WED_BUF_SIZE;
-+			buf_phys += MTK_WED_BUF_SIZE;
-+		}
-+
-+		dma_sync_single_for_device(dev->hw->dev, page_phys, PAGE_SIZE,
-+					   DMA_BIDIRECTIONAL);
-+	}
-+
-+	return 0;
-+}
-+
-+static void
-+mtk_wed_free_buffer(struct mtk_wed_device *dev)
-+{
-+	struct mtk_wdma_desc *desc = dev->buf_ring.desc;
-+	void **page_list = dev->buf_ring.pages;
-+	int page_idx;
-+	int i;
-+
-+	if (!page_list)
-+		return;
-+
-+	if (!desc)
-+		goto free_pagelist;
-+
-+	for (i = 0, page_idx = 0; i < dev->buf_ring.size; i += MTK_WED_BUF_PER_PAGE) {
-+		void *page = page_list[page_idx++];
-+
-+		if (!page)
-+			break;
-+
-+		dma_unmap_page(dev->hw->dev, desc[i].buf0,
-+			       PAGE_SIZE, DMA_BIDIRECTIONAL);
-+		__free_page(page);
-+	}
-+
-+	dma_free_coherent(dev->hw->dev, dev->buf_ring.size * sizeof(*desc),
-+			  desc, dev->buf_ring.desc_phys);
-+
-+free_pagelist:
-+	kfree(page_list);
-+}
-+
-+static void
-+mtk_wed_free_ring(struct mtk_wed_device *dev, struct mtk_wed_ring *ring)
-+{
-+	if (!ring->desc)
-+		return;
-+
-+	dma_free_coherent(dev->hw->dev, ring->size * sizeof(*ring->desc),
-+			  ring->desc, ring->desc_phys);
-+}
-+
-+static void
-+mtk_wed_free_tx_rings(struct mtk_wed_device *dev)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(dev->tx_ring); i++)
-+		mtk_wed_free_ring(dev, &dev->tx_ring[i]);
-+	for (i = 0; i < ARRAY_SIZE(dev->tx_wdma); i++)
-+		mtk_wed_free_ring(dev, &dev->tx_wdma[i]);
-+}
-+
-+static void
-+mtk_wed_set_ext_int(struct mtk_wed_device *dev, bool en)
-+{
-+	u32 mask = MTK_WED_EXT_INT_STATUS_ERROR_MASK;
-+
-+	if (!dev->hw->num_flows)
-+		mask &= ~MTK_WED_EXT_INT_STATUS_TKID_WO_PYLD;
-+
-+	wed_w32(dev, MTK_WED_EXT_INT_MASK, en ? mask : 0);
-+	wed_r32(dev, MTK_WED_EXT_INT_MASK);
-+}
-+
-+static void
-+mtk_wed_stop(struct mtk_wed_device *dev)
-+{
-+	regmap_write(dev->hw->mirror, dev->hw->index * 4, 0);
-+	mtk_wed_set_ext_int(dev, false);
-+
-+	wed_clr(dev, MTK_WED_CTRL,
-+		MTK_WED_CTRL_WDMA_INT_AGENT_EN |
-+		MTK_WED_CTRL_WPDMA_INT_AGENT_EN |
-+		MTK_WED_CTRL_WED_TX_BM_EN |
-+		MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
-+	wed_w32(dev, MTK_WED_WPDMA_INT_TRIGGER, 0);
-+	wed_w32(dev, MTK_WED_WDMA_INT_TRIGGER, 0);
-+	wdma_w32(dev, MTK_WDMA_INT_MASK, 0);
-+	wdma_w32(dev, MTK_WDMA_INT_GRP2, 0);
-+	wed_w32(dev, MTK_WED_WPDMA_INT_MASK, 0);
-+
-+	wed_clr(dev, MTK_WED_GLO_CFG,
-+		MTK_WED_GLO_CFG_TX_DMA_EN |
-+		MTK_WED_GLO_CFG_RX_DMA_EN);
-+	wed_clr(dev, MTK_WED_WPDMA_GLO_CFG,
-+		MTK_WED_WPDMA_GLO_CFG_TX_DRV_EN |
-+		MTK_WED_WPDMA_GLO_CFG_RX_DRV_EN);
-+	wed_clr(dev, MTK_WED_WDMA_GLO_CFG,
-+		MTK_WED_WDMA_GLO_CFG_RX_DRV_EN);
-+}
-+
-+static void
-+mtk_wed_detach(struct mtk_wed_device *dev)
-+{
-+	struct device_node *wlan_node = dev->wlan.pci_dev->dev.of_node;
-+	struct mtk_wed_hw *hw = dev->hw;
-+
-+	mutex_lock(&hw_lock);
-+
-+	mtk_wed_stop(dev);
-+
-+	wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_RX);
-+	wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
-+
-+	mtk_wed_reset(dev, MTK_WED_RESET_WED);
-+
-+	mtk_wed_free_buffer(dev);
-+	mtk_wed_free_tx_rings(dev);
-+
-+	if (of_dma_is_coherent(wlan_node))
-+		regmap_update_bits(hw->hifsys, HIFSYS_DMA_AG_MAP,
-+				   BIT(hw->index), BIT(hw->index));
-+
-+	if (!hw_list[!hw->index]->wed_dev &&
-+	    hw->eth->dma_dev != hw->eth->dev)
-+		mtk_eth_set_dma_device(hw->eth, hw->eth->dev);
-+
-+	memset(dev, 0, sizeof(*dev));
-+	module_put(THIS_MODULE);
-+
-+	hw->wed_dev = NULL;
-+	mutex_unlock(&hw_lock);
-+}
-+
-+static void
-+mtk_wed_hw_init_early(struct mtk_wed_device *dev)
-+{
-+	u32 mask, set;
-+	u32 offset;
-+
-+	mtk_wed_stop(dev);
-+	mtk_wed_reset(dev, MTK_WED_RESET_WED);
-+
-+	mask = MTK_WED_WDMA_GLO_CFG_BT_SIZE |
-+	       MTK_WED_WDMA_GLO_CFG_DYNAMIC_DMAD_RECYCLE |
-+	       MTK_WED_WDMA_GLO_CFG_RX_DIS_FSM_AUTO_IDLE;
-+	set = FIELD_PREP(MTK_WED_WDMA_GLO_CFG_BT_SIZE, 2) |
-+	      MTK_WED_WDMA_GLO_CFG_DYNAMIC_SKIP_DMAD_PREP |
-+	      MTK_WED_WDMA_GLO_CFG_IDLE_DMAD_SUPPLY;
-+	wed_m32(dev, MTK_WED_WDMA_GLO_CFG, mask, set);
-+
-+	wdma_set(dev, MTK_WDMA_GLO_CFG, MTK_WDMA_GLO_CFG_RX_INFO_PRERES);
-+
-+	offset = dev->hw->index ? 0x04000400 : 0;
-+	wed_w32(dev, MTK_WED_WDMA_OFFSET0, 0x2a042a20 + offset);
-+	wed_w32(dev, MTK_WED_WDMA_OFFSET1, 0x29002800 + offset);
-+
-+	wed_w32(dev, MTK_WED_PCIE_CFG_BASE, MTK_PCIE_BASE(dev->hw->index));
-+	wed_w32(dev, MTK_WED_WPDMA_CFG_BASE, dev->wlan.wpdma_phys);
-+}
-+
-+static void
-+mtk_wed_hw_init(struct mtk_wed_device *dev)
-+{
-+	if (dev->init_done)
-+		return;
-+
-+	dev->init_done = true;
-+	mtk_wed_set_ext_int(dev, false);
-+	wed_w32(dev, MTK_WED_TX_BM_CTRL,
-+		MTK_WED_TX_BM_CTRL_PAUSE |
-+		FIELD_PREP(MTK_WED_TX_BM_CTRL_VLD_GRP_NUM,
-+			   dev->buf_ring.size / 128) |
-+		FIELD_PREP(MTK_WED_TX_BM_CTRL_RSV_GRP_NUM,
-+			   MTK_WED_TX_RING_SIZE / 256));
-+
-+	wed_w32(dev, MTK_WED_TX_BM_BASE, dev->buf_ring.desc_phys);
-+
-+	wed_w32(dev, MTK_WED_TX_BM_TKID,
-+		FIELD_PREP(MTK_WED_TX_BM_TKID_START,
-+			   dev->wlan.token_start) |
-+		FIELD_PREP(MTK_WED_TX_BM_TKID_END,
-+			   dev->wlan.token_start + dev->wlan.nbuf - 1));
-+
-+	wed_w32(dev, MTK_WED_TX_BM_BUF_LEN, MTK_WED_PKT_SIZE);
-+
-+	wed_w32(dev, MTK_WED_TX_BM_DYN_THR,
-+		FIELD_PREP(MTK_WED_TX_BM_DYN_THR_LO, 1) |
-+		MTK_WED_TX_BM_DYN_THR_HI);
-+
-+	mtk_wed_reset(dev, MTK_WED_RESET_TX_BM);
-+
-+	wed_set(dev, MTK_WED_CTRL,
-+		MTK_WED_CTRL_WED_TX_BM_EN |
-+		MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
-+
-+	wed_clr(dev, MTK_WED_TX_BM_CTRL, MTK_WED_TX_BM_CTRL_PAUSE);
-+}
-+
-+static void
-+mtk_wed_ring_reset(struct mtk_wdma_desc *desc, int size)
-+{
-+	int i;
-+
-+	for (i = 0; i < size; i++) {
-+		desc[i].buf0 = 0;
-+		desc[i].ctrl = cpu_to_le32(MTK_WDMA_DESC_CTRL_DMA_DONE);
-+		desc[i].buf1 = 0;
-+		desc[i].info = 0;
-+	}
-+}
-+
-+static u32
-+mtk_wed_check_busy(struct mtk_wed_device *dev)
-+{
-+	if (wed_r32(dev, MTK_WED_GLO_CFG) & MTK_WED_GLO_CFG_TX_DMA_BUSY)
-+		return true;
-+
-+	if (wed_r32(dev, MTK_WED_WPDMA_GLO_CFG) &
-+	    MTK_WED_WPDMA_GLO_CFG_TX_DRV_BUSY)
-+		return true;
-+
-+	if (wed_r32(dev, MTK_WED_CTRL) & MTK_WED_CTRL_WDMA_INT_AGENT_BUSY)
-+		return true;
-+
-+	if (wed_r32(dev, MTK_WED_WDMA_GLO_CFG) &
-+	    MTK_WED_WDMA_GLO_CFG_RX_DRV_BUSY)
-+		return true;
-+
-+	if (wdma_r32(dev, MTK_WDMA_GLO_CFG) &
-+	    MTK_WED_WDMA_GLO_CFG_RX_DRV_BUSY)
-+		return true;
-+
-+	if (wed_r32(dev, MTK_WED_CTRL) &
-+	    (MTK_WED_CTRL_WED_TX_BM_BUSY | MTK_WED_CTRL_WED_TX_FREE_AGENT_BUSY))
-+		return true;
-+
-+	return false;
-+}
-+
-+static int
-+mtk_wed_poll_busy(struct mtk_wed_device *dev)
-+{
-+	int sleep = 15000;
-+	int timeout = 100 * sleep;
-+	u32 val;
-+
-+	return read_poll_timeout(mtk_wed_check_busy, val, !val, sleep,
-+				 timeout, false, dev);
-+}
-+
-+static void
-+mtk_wed_reset_dma(struct mtk_wed_device *dev)
-+{
-+	bool busy = false;
-+	u32 val;
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(dev->tx_ring); i++) {
-+		struct mtk_wdma_desc *desc = dev->tx_ring[i].desc;
-+
-+		if (!desc)
-+			continue;
-+
-+		mtk_wed_ring_reset(desc, MTK_WED_TX_RING_SIZE);
-+	}
-+
-+	if (mtk_wed_poll_busy(dev))
-+		busy = mtk_wed_check_busy(dev);
-+
-+	if (busy) {
-+		mtk_wed_reset(dev, MTK_WED_RESET_WED_TX_DMA);
-+	} else {
-+		wed_w32(dev, MTK_WED_RESET_IDX,
-+			MTK_WED_RESET_IDX_TX |
-+			MTK_WED_RESET_IDX_RX);
-+		wed_w32(dev, MTK_WED_RESET_IDX, 0);
-+	}
-+
-+	wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_RX);
-+	wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
-+
-+	if (busy) {
-+		mtk_wed_reset(dev, MTK_WED_RESET_WDMA_INT_AGENT);
-+		mtk_wed_reset(dev, MTK_WED_RESET_WDMA_RX_DRV);
-+	} else {
-+		wed_w32(dev, MTK_WED_WDMA_RESET_IDX,
-+			MTK_WED_WDMA_RESET_IDX_RX | MTK_WED_WDMA_RESET_IDX_DRV);
-+		wed_w32(dev, MTK_WED_WDMA_RESET_IDX, 0);
-+
-+		wed_set(dev, MTK_WED_WDMA_GLO_CFG,
-+			MTK_WED_WDMA_GLO_CFG_RST_INIT_COMPLETE);
-+
-+		wed_clr(dev, MTK_WED_WDMA_GLO_CFG,
-+			MTK_WED_WDMA_GLO_CFG_RST_INIT_COMPLETE);
-+	}
-+
-+	for (i = 0; i < 100; i++) {
-+		val = wed_r32(dev, MTK_WED_TX_BM_INTF);
-+		if (FIELD_GET(MTK_WED_TX_BM_INTF_TKFIFO_FDEP, val) == 0x40)
-+			break;
-+	}
-+
-+	mtk_wed_reset(dev, MTK_WED_RESET_TX_FREE_AGENT);
-+	mtk_wed_reset(dev, MTK_WED_RESET_TX_BM);
-+
-+	if (busy) {
-+		mtk_wed_reset(dev, MTK_WED_RESET_WPDMA_INT_AGENT);
-+		mtk_wed_reset(dev, MTK_WED_RESET_WPDMA_TX_DRV);
-+		mtk_wed_reset(dev, MTK_WED_RESET_WPDMA_RX_DRV);
-+	} else {
-+		wed_w32(dev, MTK_WED_WPDMA_RESET_IDX,
-+			MTK_WED_WPDMA_RESET_IDX_TX |
-+			MTK_WED_WPDMA_RESET_IDX_RX);
-+		wed_w32(dev, MTK_WED_WPDMA_RESET_IDX, 0);
-+	}
-+
-+}
-+
-+static int
-+mtk_wed_ring_alloc(struct mtk_wed_device *dev, struct mtk_wed_ring *ring,
-+		   int size)
-+{
-+	ring->desc = dma_alloc_coherent(dev->hw->dev,
-+					size * sizeof(*ring->desc),
-+					&ring->desc_phys, GFP_KERNEL);
-+	if (!ring->desc)
-+		return -ENOMEM;
-+
-+	ring->size = size;
-+	mtk_wed_ring_reset(ring->desc, size);
-+
-+	return 0;
-+}
-+
-+static int
-+mtk_wed_wdma_ring_setup(struct mtk_wed_device *dev, int idx, int size)
-+{
-+	struct mtk_wed_ring *wdma = &dev->tx_wdma[idx];
-+
-+	if (mtk_wed_ring_alloc(dev, wdma, MTK_WED_WDMA_RING_SIZE))
-+		return -ENOMEM;
-+
-+	wdma_w32(dev, MTK_WDMA_RING_RX(idx) + MTK_WED_RING_OFS_BASE,
-+		 wdma->desc_phys);
-+	wdma_w32(dev, MTK_WDMA_RING_RX(idx) + MTK_WED_RING_OFS_COUNT,
-+		 size);
-+	wdma_w32(dev, MTK_WDMA_RING_RX(idx) + MTK_WED_RING_OFS_CPU_IDX, 0);
-+
-+	wed_w32(dev, MTK_WED_WDMA_RING_RX(idx) + MTK_WED_RING_OFS_BASE,
-+		wdma->desc_phys);
-+	wed_w32(dev, MTK_WED_WDMA_RING_RX(idx) + MTK_WED_RING_OFS_COUNT,
-+		size);
-+
-+	return 0;
-+}
-+
-+static void
-+mtk_wed_start(struct mtk_wed_device *dev, u32 irq_mask)
-+{
-+	u32 wdma_mask;
-+	u32 val;
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(dev->tx_wdma); i++)
-+		if (!dev->tx_wdma[i].desc)
-+			mtk_wed_wdma_ring_setup(dev, i, 16);
-+
-+	wdma_mask = FIELD_PREP(MTK_WDMA_INT_MASK_RX_DONE, GENMASK(1, 0));
-+
-+	mtk_wed_hw_init(dev);
-+
-+	wed_set(dev, MTK_WED_CTRL,
-+		MTK_WED_CTRL_WDMA_INT_AGENT_EN |
-+		MTK_WED_CTRL_WPDMA_INT_AGENT_EN |
-+		MTK_WED_CTRL_WED_TX_BM_EN |
-+		MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
-+
-+	wed_w32(dev, MTK_WED_PCIE_INT_TRIGGER, MTK_WED_PCIE_INT_TRIGGER_STATUS);
-+
-+	wed_w32(dev, MTK_WED_WPDMA_INT_TRIGGER,
-+		MTK_WED_WPDMA_INT_TRIGGER_RX_DONE |
-+		MTK_WED_WPDMA_INT_TRIGGER_TX_DONE);
-+
-+	wed_set(dev, MTK_WED_WPDMA_INT_CTRL,
-+		MTK_WED_WPDMA_INT_CTRL_SUBRT_ADV);
-+
-+	wed_w32(dev, MTK_WED_WDMA_INT_TRIGGER, wdma_mask);
-+	wed_clr(dev, MTK_WED_WDMA_INT_CTRL, wdma_mask);
-+
-+	wdma_w32(dev, MTK_WDMA_INT_MASK, wdma_mask);
-+	wdma_w32(dev, MTK_WDMA_INT_GRP2, wdma_mask);
-+
-+	wed_w32(dev, MTK_WED_WPDMA_INT_MASK, irq_mask);
-+	wed_w32(dev, MTK_WED_INT_MASK, irq_mask);
-+
-+	wed_set(dev, MTK_WED_GLO_CFG,
-+		MTK_WED_GLO_CFG_TX_DMA_EN |
-+		MTK_WED_GLO_CFG_RX_DMA_EN);
-+	wed_set(dev, MTK_WED_WPDMA_GLO_CFG,
-+		MTK_WED_WPDMA_GLO_CFG_TX_DRV_EN |
-+		MTK_WED_WPDMA_GLO_CFG_RX_DRV_EN);
-+	wed_set(dev, MTK_WED_WDMA_GLO_CFG,
-+		MTK_WED_WDMA_GLO_CFG_RX_DRV_EN);
-+
-+	mtk_wed_set_ext_int(dev, true);
-+	val = dev->wlan.wpdma_phys |
-+	      MTK_PCIE_MIRROR_MAP_EN |
-+	      FIELD_PREP(MTK_PCIE_MIRROR_MAP_WED_ID, dev->hw->index);
-+
-+	if (dev->hw->index)
-+		val |= BIT(1);
-+	val |= BIT(0);
-+	regmap_write(dev->hw->mirror, dev->hw->index * 4, val);
-+
-+	dev->running = true;
-+}
-+
-+static int
-+mtk_wed_attach(struct mtk_wed_device *dev)
-+	__releases(RCU)
-+{
-+	struct mtk_wed_hw *hw;
-+	int ret = 0;
-+
-+	RCU_LOCKDEP_WARN(!rcu_read_lock_held(),
-+			 "mtk_wed_attach without holding the RCU read lock");
-+
-+	if (pci_domain_nr(dev->wlan.pci_dev->bus) > 1 ||
-+	    !try_module_get(THIS_MODULE))
-+		ret = -ENODEV;
-+
-+	rcu_read_unlock();
-+
-+	if (ret)
-+		return ret;
-+
-+	mutex_lock(&hw_lock);
-+
-+	hw = mtk_wed_assign(dev);
-+	if (!hw) {
-+		module_put(THIS_MODULE);
-+		ret = -ENODEV;
-+		goto out;
-+	}
-+
-+	dev_info(&dev->wlan.pci_dev->dev, "attaching wed device %d\n", hw->index);
-+
-+	dev->hw = hw;
-+	dev->dev = hw->dev;
-+	dev->irq = hw->irq;
-+	dev->wdma_idx = hw->index;
-+
-+	if (hw->eth->dma_dev == hw->eth->dev &&
-+	    of_dma_is_coherent(hw->eth->dev->of_node))
-+		mtk_eth_set_dma_device(hw->eth, hw->dev);
-+
-+	ret = mtk_wed_buffer_alloc(dev);
-+	if (ret) {
-+		mtk_wed_detach(dev);
-+		goto out;
-+	}
-+
-+	mtk_wed_hw_init_early(dev);
-+	regmap_update_bits(hw->hifsys, HIFSYS_DMA_AG_MAP, BIT(hw->index), 0);
-+
-+out:
-+	mutex_unlock(&hw_lock);
-+
-+	return ret;
-+}
-+
-+static int
-+mtk_wed_tx_ring_setup(struct mtk_wed_device *dev, int idx, void __iomem *regs)
-+{
-+	struct mtk_wed_ring *ring = &dev->tx_ring[idx];
-+
-+	/*
-+	 * Tx ring redirection:
-+	 * Instead of configuring the WLAN PDMA TX ring directly, the WLAN
-+	 * driver allocated DMA ring gets configured into WED MTK_WED_RING_TX(n)
-+	 * registers.
-+	 *
-+	 * WED driver posts its own DMA ring as WLAN PDMA TX and configures it
-+	 * into MTK_WED_WPDMA_RING_TX(n) registers.
-+	 * It gets filled with packets picked up from WED TX ring and from
-+	 * WDMA RX.
-+	 */
-+
-+	BUG_ON(idx > ARRAY_SIZE(dev->tx_ring));
-+
-+	if (mtk_wed_ring_alloc(dev, ring, MTK_WED_TX_RING_SIZE))
-+		return -ENOMEM;
-+
-+	if (mtk_wed_wdma_ring_setup(dev, idx, MTK_WED_WDMA_RING_SIZE))
-+		return -ENOMEM;
-+
-+	ring->reg_base = MTK_WED_RING_TX(idx);
-+	ring->wpdma = regs;
-+
-+	/* WED -> WPDMA */
-+	wpdma_tx_w32(dev, idx, MTK_WED_RING_OFS_BASE, ring->desc_phys);
-+	wpdma_tx_w32(dev, idx, MTK_WED_RING_OFS_COUNT, MTK_WED_TX_RING_SIZE);
-+	wpdma_tx_w32(dev, idx, MTK_WED_RING_OFS_CPU_IDX, 0);
-+
-+	wed_w32(dev, MTK_WED_WPDMA_RING_TX(idx) + MTK_WED_RING_OFS_BASE,
-+		ring->desc_phys);
-+	wed_w32(dev, MTK_WED_WPDMA_RING_TX(idx) + MTK_WED_RING_OFS_COUNT,
-+		MTK_WED_TX_RING_SIZE);
-+	wed_w32(dev, MTK_WED_WPDMA_RING_TX(idx) + MTK_WED_RING_OFS_CPU_IDX, 0);
-+
-+	return 0;
-+}
-+
-+static int
-+mtk_wed_txfree_ring_setup(struct mtk_wed_device *dev, void __iomem *regs)
-+{
-+	struct mtk_wed_ring *ring = &dev->txfree_ring;
-+	int i;
-+
-+	/*
-+	 * For txfree event handling, the same DMA ring is shared between WED
-+	 * and WLAN. The WLAN driver accesses the ring index registers through
-+	 * WED
-+	 */
-+	ring->reg_base = MTK_WED_RING_RX(1);
-+	ring->wpdma = regs;
-+
-+	for (i = 0; i < 12; i += 4) {
-+		u32 val = readl(regs + i);
-+
-+		wed_w32(dev, MTK_WED_RING_RX(1) + i, val);
-+		wed_w32(dev, MTK_WED_WPDMA_RING_RX(1) + i, val);
-+	}
-+
-+	return 0;
-+}
-+
-+static u32
-+mtk_wed_irq_get(struct mtk_wed_device *dev, u32 mask)
-+{
-+	u32 val;
-+
-+	val = wed_r32(dev, MTK_WED_EXT_INT_STATUS);
-+	wed_w32(dev, MTK_WED_EXT_INT_STATUS, val);
-+	val &= MTK_WED_EXT_INT_STATUS_ERROR_MASK;
-+	if (!dev->hw->num_flows)
-+		val &= ~MTK_WED_EXT_INT_STATUS_TKID_WO_PYLD;
-+	if (val && net_ratelimit())
-+		pr_err("mtk_wed%d: error status=%08x\n", dev->hw->index, val);
-+
-+	val = wed_r32(dev, MTK_WED_INT_STATUS);
-+	val &= mask;
-+	wed_w32(dev, MTK_WED_INT_STATUS, val); /* ACK */
-+
-+	return val;
-+}
-+
-+static void
-+mtk_wed_irq_set_mask(struct mtk_wed_device *dev, u32 mask)
-+{
-+	if (!dev->running)
-+		return;
-+
-+	mtk_wed_set_ext_int(dev, !!mask);
-+	wed_w32(dev, MTK_WED_INT_MASK, mask);
-+}
-+
-+int mtk_wed_flow_add(int index)
-+{
-+	struct mtk_wed_hw *hw = hw_list[index];
-+	int ret;
-+
-+	if (!hw || !hw->wed_dev)
-+		return -ENODEV;
-+
-+	if (hw->num_flows) {
-+		hw->num_flows++;
-+		return 0;
-+	}
-+
-+	mutex_lock(&hw_lock);
-+	if (!hw->wed_dev) {
-+		ret = -ENODEV;
-+		goto out;
-+	}
-+
-+	ret = hw->wed_dev->wlan.offload_enable(hw->wed_dev);
-+	if (!ret)
-+		hw->num_flows++;
-+	mtk_wed_set_ext_int(hw->wed_dev, true);
-+
-+out:
-+	mutex_unlock(&hw_lock);
-+
-+	return ret;
-+}
-+
-+void mtk_wed_flow_remove(int index)
-+{
-+	struct mtk_wed_hw *hw = hw_list[index];
-+
-+	if (!hw)
-+		return;
-+
-+	if (--hw->num_flows)
-+		return;
-+
-+	mutex_lock(&hw_lock);
-+	if (!hw->wed_dev)
-+		goto out;
-+
-+	hw->wed_dev->wlan.offload_disable(hw->wed_dev);
-+	mtk_wed_set_ext_int(hw->wed_dev, true);
-+
-+out:
-+	mutex_unlock(&hw_lock);
-+}
-+
-+void mtk_wed_add_hw(struct device_node *np, struct mtk_eth *eth,
-+		    void __iomem *wdma, int index)
-+{
-+	static const struct mtk_wed_ops wed_ops = {
-+		.attach = mtk_wed_attach,
-+		.tx_ring_setup = mtk_wed_tx_ring_setup,
-+		.txfree_ring_setup = mtk_wed_txfree_ring_setup,
-+		.start = mtk_wed_start,
-+		.stop = mtk_wed_stop,
-+		.reset_dma = mtk_wed_reset_dma,
-+		.reg_read = wed_r32,
-+		.reg_write = wed_w32,
-+		.irq_get = mtk_wed_irq_get,
-+		.irq_set_mask = mtk_wed_irq_set_mask,
-+		.detach = mtk_wed_detach,
-+	};
-+	struct device_node *eth_np = eth->dev->of_node;
-+	struct platform_device *pdev;
-+	struct mtk_wed_hw *hw;
-+	struct regmap *regs;
-+	int irq;
-+
-+	if (!np)
-+		return;
-+
-+	pdev = of_find_device_by_node(np);
-+	if (!pdev)
-+		return;
-+
-+	get_device(&pdev->dev);
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0)
-+		return;
-+
-+	regs = syscon_regmap_lookup_by_phandle(np, NULL);
-+	if (!regs)
-+		return;
-+
-+	rcu_assign_pointer(mtk_soc_wed_ops, &wed_ops);
-+
-+	mutex_lock(&hw_lock);
-+
-+	if (WARN_ON(hw_list[index]))
-+		goto unlock;
-+
-+	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
-+	hw->node = np;
-+	hw->regs = regs;
-+	hw->eth = eth;
-+	hw->dev = &pdev->dev;
-+	hw->wdma = wdma;
-+	hw->index = index;
-+	hw->irq = irq;
-+	hw->mirror = syscon_regmap_lookup_by_phandle(eth_np,
-+						     "mediatek,pcie-mirror");
-+	hw->hifsys = syscon_regmap_lookup_by_phandle(eth_np,
-+						     "mediatek,hifsys");
-+	if (IS_ERR(hw->mirror) || IS_ERR(hw->hifsys)) {
-+		kfree(hw);
-+		goto unlock;
-+	}
-+
-+	if (!index) {
-+		regmap_write(hw->mirror, 0, 0);
-+		regmap_write(hw->mirror, 4, 0);
-+	}
-+	mtk_wed_hw_add_debugfs(hw);
-+
-+	hw_list[index] = hw;
-+
-+unlock:
-+	mutex_unlock(&hw_lock);
-+}
-+
-+void mtk_wed_exit(void)
-+{
-+	int i;
-+
-+	rcu_assign_pointer(mtk_soc_wed_ops, NULL);
-+
-+	synchronize_rcu();
-+
-+	for (i = 0; i < ARRAY_SIZE(hw_list); i++) {
-+		struct mtk_wed_hw *hw;
-+
-+		hw = hw_list[i];
-+		if (!hw)
-+			continue;
-+
-+		hw_list[i] = NULL;
-+		debugfs_remove(hw->debugfs_dir);
-+		put_device(hw->dev);
-+		kfree(hw);
-+	}
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.h
-@@ -0,0 +1,128 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2021 Felix Fietkau <nbd@nbd.name> */
-+
-+#ifndef __MTK_WED_PRIV_H
-+#define __MTK_WED_PRIV_H
-+
-+#include <linux/soc/mediatek/mtk_wed.h>
-+#include <linux/debugfs.h>
-+#include <linux/regmap.h>
-+
-+struct mtk_eth;
-+
-+struct mtk_wed_hw {
-+	struct device_node *node;
-+	struct mtk_eth *eth;
-+	struct regmap *regs;
-+	struct regmap *hifsys;
-+	struct device *dev;
-+	void __iomem *wdma;
-+	struct regmap *mirror;
-+	struct dentry *debugfs_dir;
-+	struct mtk_wed_device *wed_dev;
-+	u32 debugfs_reg;
-+	u32 num_flows;
-+	char dirname[5];
-+	int irq;
-+	int index;
-+};
-+
-+
-+#ifdef CONFIG_NET_MEDIATEK_SOC_WED
-+static inline void
-+wed_w32(struct mtk_wed_device *dev, u32 reg, u32 val)
-+{
-+	regmap_write(dev->hw->regs, reg, val);
-+}
-+
-+static inline u32
-+wed_r32(struct mtk_wed_device *dev, u32 reg)
-+{
-+	unsigned int val;
-+
-+	regmap_read(dev->hw->regs, reg, &val);
-+
-+	return val;
-+}
-+
-+static inline void
-+wdma_w32(struct mtk_wed_device *dev, u32 reg, u32 val)
-+{
-+	writel(val, dev->hw->wdma + reg);
-+}
-+
-+static inline u32
-+wdma_r32(struct mtk_wed_device *dev, u32 reg)
-+{
-+	return readl(dev->hw->wdma + reg);
-+}
-+
-+static inline u32
-+wpdma_tx_r32(struct mtk_wed_device *dev, int ring, u32 reg)
-+{
-+	if (!dev->tx_ring[ring].wpdma)
-+		return 0;
-+
-+	return readl(dev->tx_ring[ring].wpdma + reg);
-+}
-+
-+static inline void
-+wpdma_tx_w32(struct mtk_wed_device *dev, int ring, u32 reg, u32 val)
-+{
-+	if (!dev->tx_ring[ring].wpdma)
-+		return;
-+
-+	writel(val, dev->tx_ring[ring].wpdma + reg);
-+}
-+
-+static inline u32
-+wpdma_txfree_r32(struct mtk_wed_device *dev, u32 reg)
-+{
-+	if (!dev->txfree_ring.wpdma)
-+		return 0;
-+
-+	return readl(dev->txfree_ring.wpdma + reg);
-+}
-+
-+static inline void
-+wpdma_txfree_w32(struct mtk_wed_device *dev, u32 reg, u32 val)
-+{
-+	if (!dev->txfree_ring.wpdma)
-+		return;
-+
-+	writel(val, dev->txfree_ring.wpdma + reg);
-+}
-+
-+void mtk_wed_add_hw(struct device_node *np, struct mtk_eth *eth,
-+		    void __iomem *wdma, int index);
-+void mtk_wed_exit(void);
-+int mtk_wed_flow_add(int index);
-+void mtk_wed_flow_remove(int index);
-+#else
-+static inline void
-+mtk_wed_add_hw(struct device_node *np, struct mtk_eth *eth,
-+	       void __iomem *wdma, int index)
-+{
-+}
-+static inline void
-+mtk_wed_exit(void)
-+{
-+}
-+static inline int mtk_wed_flow_add(int index)
-+{
-+	return -EINVAL;
-+}
-+static inline void mtk_wed_flow_remove(int index)
-+{
-+}
-+#endif
-+
-+#ifdef CONFIG_DEBUG_FS
-+void mtk_wed_hw_add_debugfs(struct mtk_wed_hw *hw);
-+#else
-+static inline void mtk_wed_hw_add_debugfs(struct mtk_wed_hw *hw)
-+{
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-@@ -0,0 +1,175 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2021 Felix Fietkau <nbd@nbd.name> */
-+
-+#include <linux/seq_file.h>
-+#include "mtk_wed.h"
-+#include "mtk_wed_regs.h"
-+
-+struct reg_dump {
-+	const char *name;
-+	u16 offset;
-+	u8 type;
-+	u8 base;
-+};
-+
-+enum {
-+	DUMP_TYPE_STRING,
-+	DUMP_TYPE_WED,
-+	DUMP_TYPE_WDMA,
-+	DUMP_TYPE_WPDMA_TX,
-+	DUMP_TYPE_WPDMA_TXFREE,
-+};
-+
-+#define DUMP_STR(_str) { _str, 0, DUMP_TYPE_STRING }
-+#define DUMP_REG(_reg, ...) { #_reg, MTK_##_reg, __VA_ARGS__ }
-+#define DUMP_RING(_prefix, _base, ...)				\
-+	{ _prefix " BASE", _base, __VA_ARGS__ },		\
-+	{ _prefix " CNT",  _base + 0x4, __VA_ARGS__ },	\
-+	{ _prefix " CIDX", _base + 0x8, __VA_ARGS__ },	\
-+	{ _prefix " DIDX", _base + 0xc, __VA_ARGS__ }
-+
-+#define DUMP_WED(_reg) DUMP_REG(_reg, DUMP_TYPE_WED)
-+#define DUMP_WED_RING(_base) DUMP_RING(#_base, MTK_##_base, DUMP_TYPE_WED)
-+
-+#define DUMP_WDMA(_reg) DUMP_REG(_reg, DUMP_TYPE_WDMA)
-+#define DUMP_WDMA_RING(_base) DUMP_RING(#_base, MTK_##_base, DUMP_TYPE_WDMA)
-+
-+#define DUMP_WPDMA_TX_RING(_n) DUMP_RING("WPDMA_TX" #_n, 0, DUMP_TYPE_WPDMA_TX, _n)
-+#define DUMP_WPDMA_TXFREE_RING DUMP_RING("WPDMA_RX1", 0, DUMP_TYPE_WPDMA_TXFREE)
-+
-+static void
-+print_reg_val(struct seq_file *s, const char *name, u32 val)
-+{
-+	seq_printf(s, "%-32s %08x\n", name, val);
-+}
-+
-+static void
-+dump_wed_regs(struct seq_file *s, struct mtk_wed_device *dev,
-+	      const struct reg_dump *regs, int n_regs)
-+{
-+	const struct reg_dump *cur;
-+	u32 val;
-+
-+	for (cur = regs; cur < &regs[n_regs]; cur++) {
-+		switch (cur->type) {
-+		case DUMP_TYPE_STRING:
-+			seq_printf(s, "%s======== %s:\n",
-+				   cur > regs ? "\n" : "",
-+				   cur->name);
-+			continue;
-+		case DUMP_TYPE_WED:
-+			val = wed_r32(dev, cur->offset);
-+			break;
-+		case DUMP_TYPE_WDMA:
-+			val = wdma_r32(dev, cur->offset);
-+			break;
-+		case DUMP_TYPE_WPDMA_TX:
-+			val = wpdma_tx_r32(dev, cur->base, cur->offset);
-+			break;
-+		case DUMP_TYPE_WPDMA_TXFREE:
-+			val = wpdma_txfree_r32(dev, cur->offset);
-+			break;
-+		}
-+		print_reg_val(s, cur->name, val);
-+	}
-+}
-+
-+
-+static int
-+wed_txinfo_show(struct seq_file *s, void *data)
-+{
-+	static const struct reg_dump regs[] = {
-+		DUMP_STR("WED TX"),
-+		DUMP_WED(WED_TX_MIB(0)),
-+		DUMP_WED_RING(WED_RING_TX(0)),
-+
-+		DUMP_WED(WED_TX_MIB(1)),
-+		DUMP_WED_RING(WED_RING_TX(1)),
-+
-+		DUMP_STR("WPDMA TX"),
-+		DUMP_WED(WED_WPDMA_TX_MIB(0)),
-+		DUMP_WED_RING(WED_WPDMA_RING_TX(0)),
-+		DUMP_WED(WED_WPDMA_TX_COHERENT_MIB(0)),
-+
-+		DUMP_WED(WED_WPDMA_TX_MIB(1)),
-+		DUMP_WED_RING(WED_WPDMA_RING_TX(1)),
-+		DUMP_WED(WED_WPDMA_TX_COHERENT_MIB(1)),
-+
-+		DUMP_STR("WPDMA TX"),
-+		DUMP_WPDMA_TX_RING(0),
-+		DUMP_WPDMA_TX_RING(1),
-+
-+		DUMP_STR("WED WDMA RX"),
-+		DUMP_WED(WED_WDMA_RX_MIB(0)),
-+		DUMP_WED_RING(WED_WDMA_RING_RX(0)),
-+		DUMP_WED(WED_WDMA_RX_THRES(0)),
-+		DUMP_WED(WED_WDMA_RX_RECYCLE_MIB(0)),
-+		DUMP_WED(WED_WDMA_RX_PROCESSED_MIB(0)),
-+
-+		DUMP_WED(WED_WDMA_RX_MIB(1)),
-+		DUMP_WED_RING(WED_WDMA_RING_RX(1)),
-+		DUMP_WED(WED_WDMA_RX_THRES(1)),
-+		DUMP_WED(WED_WDMA_RX_RECYCLE_MIB(1)),
-+		DUMP_WED(WED_WDMA_RX_PROCESSED_MIB(1)),
-+
-+		DUMP_STR("WDMA RX"),
-+		DUMP_WDMA(WDMA_GLO_CFG),
-+		DUMP_WDMA_RING(WDMA_RING_RX(0)),
-+		DUMP_WDMA_RING(WDMA_RING_RX(1)),
-+	};
-+	struct mtk_wed_hw *hw = s->private;
-+	struct mtk_wed_device *dev = hw->wed_dev;
-+
-+	if (!dev)
-+		return 0;
-+
-+	dump_wed_regs(s, dev, regs, ARRAY_SIZE(regs));
-+
-+	return 0;
-+}
-+DEFINE_SHOW_ATTRIBUTE(wed_txinfo);
-+
-+
-+static int
-+mtk_wed_reg_set(void *data, u64 val)
-+{
-+	struct mtk_wed_hw *hw = data;
-+
-+	regmap_write(hw->regs, hw->debugfs_reg, val);
-+
-+	return 0;
-+}
-+
-+static int
-+mtk_wed_reg_get(void *data, u64 *val)
-+{
-+	struct mtk_wed_hw *hw = data;
-+	unsigned int regval;
-+	int ret;
-+
-+	ret = regmap_read(hw->regs, hw->debugfs_reg, &regval);
-+	if (ret)
-+		return ret;
-+
-+	*val = regval;
-+
-+	return 0;
-+}
-+
-+DEFINE_DEBUGFS_ATTRIBUTE(fops_regval, mtk_wed_reg_get, mtk_wed_reg_set,
-+             "0x%08llx\n");
-+
-+void mtk_wed_hw_add_debugfs(struct mtk_wed_hw *hw)
-+{
-+	struct dentry *dir;
-+
-+	snprintf(hw->dirname, sizeof(hw->dirname), "wed%d", hw->index);
-+	dir = debugfs_create_dir(hw->dirname, NULL);
-+	if (!dir)
-+		return;
-+
-+	hw->debugfs_dir = dir;
-+	debugfs_create_u32("regidx", 0600, dir, &hw->debugfs_reg);
-+	debugfs_create_file_unsafe("regval", 0600, dir, hw, &fops_regval);
-+	debugfs_create_file_unsafe("txinfo", 0400, dir, hw, &wed_txinfo_fops);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_ops.c
-@@ -0,0 +1,8 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2020 Felix Fietkau <nbd@nbd.name> */
-+
-+#include <linux/kernel.h>
-+#include <linux/soc/mediatek/mtk_wed.h>
-+
-+const struct mtk_wed_ops __rcu *mtk_soc_wed_ops;
-+EXPORT_SYMBOL_GPL(mtk_soc_wed_ops);
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-@@ -0,0 +1,251 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2020 Felix Fietkau <nbd@nbd.name> */
-+
-+#ifndef __MTK_WED_REGS_H
-+#define __MTK_WED_REGS_H
-+
-+#define MTK_WDMA_DESC_CTRL_LEN1			GENMASK(14, 0)
-+#define MTK_WDMA_DESC_CTRL_LAST_SEG1		BIT(15)
-+#define MTK_WDMA_DESC_CTRL_BURST		BIT(16)
-+#define MTK_WDMA_DESC_CTRL_LEN0			GENMASK(29, 16)
-+#define MTK_WDMA_DESC_CTRL_LAST_SEG0		BIT(30)
-+#define MTK_WDMA_DESC_CTRL_DMA_DONE		BIT(31)
-+
-+struct mtk_wdma_desc {
-+	__le32 buf0;
-+	__le32 ctrl;
-+	__le32 buf1;
-+	__le32 info;
-+} __packed __aligned(4);
-+
-+#define MTK_WED_RESET					0x008
-+#define MTK_WED_RESET_TX_BM				BIT(0)
-+#define MTK_WED_RESET_TX_FREE_AGENT			BIT(4)
-+#define MTK_WED_RESET_WPDMA_TX_DRV			BIT(8)
-+#define MTK_WED_RESET_WPDMA_RX_DRV			BIT(9)
-+#define MTK_WED_RESET_WPDMA_INT_AGENT			BIT(11)
-+#define MTK_WED_RESET_WED_TX_DMA			BIT(12)
-+#define MTK_WED_RESET_WDMA_RX_DRV			BIT(17)
-+#define MTK_WED_RESET_WDMA_INT_AGENT			BIT(19)
-+#define MTK_WED_RESET_WED				BIT(31)
-+
-+#define MTK_WED_CTRL					0x00c
-+#define MTK_WED_CTRL_WPDMA_INT_AGENT_EN			BIT(0)
-+#define MTK_WED_CTRL_WPDMA_INT_AGENT_BUSY		BIT(1)
-+#define MTK_WED_CTRL_WDMA_INT_AGENT_EN			BIT(2)
-+#define MTK_WED_CTRL_WDMA_INT_AGENT_BUSY		BIT(3)
-+#define MTK_WED_CTRL_WED_TX_BM_EN			BIT(8)
-+#define MTK_WED_CTRL_WED_TX_BM_BUSY			BIT(9)
-+#define MTK_WED_CTRL_WED_TX_FREE_AGENT_EN		BIT(10)
-+#define MTK_WED_CTRL_WED_TX_FREE_AGENT_BUSY		BIT(11)
-+#define MTK_WED_CTRL_RESERVE_EN				BIT(12)
-+#define MTK_WED_CTRL_RESERVE_BUSY			BIT(13)
-+#define MTK_WED_CTRL_FINAL_DIDX_READ			BIT(24)
-+#define MTK_WED_CTRL_MIB_READ_CLEAR			BIT(28)
-+
-+#define MTK_WED_EXT_INT_STATUS				0x020
-+#define MTK_WED_EXT_INT_STATUS_TF_LEN_ERR		BIT(0)
-+#define MTK_WED_EXT_INT_STATUS_TKID_WO_PYLD		BIT(1)
-+#define MTK_WED_EXT_INT_STATUS_TKID_TITO_INVALID	BIT(4)
-+#define MTK_WED_EXT_INT_STATUS_TX_FBUF_LO_TH		BIT(8)
-+#define MTK_WED_EXT_INT_STATUS_TX_FBUF_HI_TH		BIT(9)
-+#define MTK_WED_EXT_INT_STATUS_RX_FBUF_LO_TH		BIT(12)
-+#define MTK_WED_EXT_INT_STATUS_RX_FBUF_HI_TH		BIT(13)
-+#define MTK_WED_EXT_INT_STATUS_RX_DRV_R_RESP_ERR	BIT(16)
-+#define MTK_WED_EXT_INT_STATUS_RX_DRV_W_RESP_ERR	BIT(17)
-+#define MTK_WED_EXT_INT_STATUS_RX_DRV_COHERENT		BIT(18)
-+#define MTK_WED_EXT_INT_STATUS_RX_DRV_INIT_WDMA_EN	BIT(19)
-+#define MTK_WED_EXT_INT_STATUS_RX_DRV_BM_DMAD_COHERENT	BIT(20)
-+#define MTK_WED_EXT_INT_STATUS_TX_DRV_R_RESP_ERR	BIT(21)
-+#define MTK_WED_EXT_INT_STATUS_TX_DRV_W_RESP_ERR	BIT(22)
-+#define MTK_WED_EXT_INT_STATUS_RX_DRV_DMA_RECYCLE	BIT(24)
-+#define MTK_WED_EXT_INT_STATUS_ERROR_MASK		(MTK_WED_EXT_INT_STATUS_TF_LEN_ERR | \
-+							 MTK_WED_EXT_INT_STATUS_TKID_WO_PYLD | \
-+							 MTK_WED_EXT_INT_STATUS_TKID_TITO_INVALID | \
-+							 MTK_WED_EXT_INT_STATUS_RX_DRV_R_RESP_ERR | \
-+							 MTK_WED_EXT_INT_STATUS_RX_DRV_W_RESP_ERR | \
-+							 MTK_WED_EXT_INT_STATUS_RX_DRV_INIT_WDMA_EN | \
-+							 MTK_WED_EXT_INT_STATUS_TX_DRV_R_RESP_ERR | \
-+							 MTK_WED_EXT_INT_STATUS_TX_DRV_W_RESP_ERR)
-+
-+#define MTK_WED_EXT_INT_MASK				0x028
-+
-+#define MTK_WED_STATUS					0x060
-+#define MTK_WED_STATUS_TX				GENMASK(15, 8)
-+
-+#define MTK_WED_TX_BM_CTRL				0x080
-+#define MTK_WED_TX_BM_CTRL_VLD_GRP_NUM			GENMASK(6, 0)
-+#define MTK_WED_TX_BM_CTRL_RSV_GRP_NUM			GENMASK(22, 16)
-+#define MTK_WED_TX_BM_CTRL_PAUSE			BIT(28)
-+
-+#define MTK_WED_TX_BM_BASE				0x084
-+
-+#define MTK_WED_TX_BM_TKID				0x088
-+#define MTK_WED_TX_BM_TKID_START			GENMASK(15, 0)
-+#define MTK_WED_TX_BM_TKID_END				GENMASK(31, 16)
-+
-+#define MTK_WED_TX_BM_BUF_LEN				0x08c
-+
-+#define MTK_WED_TX_BM_INTF				0x09c
-+#define MTK_WED_TX_BM_INTF_TKID				GENMASK(15, 0)
-+#define MTK_WED_TX_BM_INTF_TKFIFO_FDEP			GENMASK(23, 16)
-+#define MTK_WED_TX_BM_INTF_TKID_VALID			BIT(28)
-+#define MTK_WED_TX_BM_INTF_TKID_READ			BIT(29)
-+
-+#define MTK_WED_TX_BM_DYN_THR				0x0a0
-+#define MTK_WED_TX_BM_DYN_THR_LO			GENMASK(6, 0)
-+#define MTK_WED_TX_BM_DYN_THR_HI			GENMASK(22, 16)
-+
-+#define MTK_WED_INT_STATUS				0x200
-+#define MTK_WED_INT_MASK				0x204
-+
-+#define MTK_WED_GLO_CFG					0x208
-+#define MTK_WED_GLO_CFG_TX_DMA_EN			BIT(0)
-+#define MTK_WED_GLO_CFG_TX_DMA_BUSY			BIT(1)
-+#define MTK_WED_GLO_CFG_RX_DMA_EN			BIT(2)
-+#define MTK_WED_GLO_CFG_RX_DMA_BUSY			BIT(3)
-+#define MTK_WED_GLO_CFG_RX_BT_SIZE			GENMASK(5, 4)
-+#define MTK_WED_GLO_CFG_TX_WB_DDONE			BIT(6)
-+#define MTK_WED_GLO_CFG_BIG_ENDIAN			BIT(7)
-+#define MTK_WED_GLO_CFG_DIS_BT_SIZE_ALIGN		BIT(8)
-+#define MTK_WED_GLO_CFG_TX_BT_SIZE_LO			BIT(9)
-+#define MTK_WED_GLO_CFG_MULTI_DMA_EN			GENMASK(11, 10)
-+#define MTK_WED_GLO_CFG_FIFO_LITTLE_ENDIAN		BIT(12)
-+#define MTK_WED_GLO_CFG_MI_DEPTH_RD			GENMASK(21, 13)
-+#define MTK_WED_GLO_CFG_TX_BT_SIZE_HI			GENMASK(23, 22)
-+#define MTK_WED_GLO_CFG_SW_RESET			BIT(24)
-+#define MTK_WED_GLO_CFG_FIRST_TOKEN_ONLY		BIT(26)
-+#define MTK_WED_GLO_CFG_OMIT_RX_INFO			BIT(27)
-+#define MTK_WED_GLO_CFG_OMIT_TX_INFO			BIT(28)
-+#define MTK_WED_GLO_CFG_BYTE_SWAP			BIT(29)
-+#define MTK_WED_GLO_CFG_RX_2B_OFFSET			BIT(31)
-+
-+#define MTK_WED_RESET_IDX				0x20c
-+#define MTK_WED_RESET_IDX_TX				GENMASK(3, 0)
-+#define MTK_WED_RESET_IDX_RX				GENMASK(17, 16)
-+
-+#define MTK_WED_TX_MIB(_n)				(0x2a0 + (_n) * 4)
-+
-+#define MTK_WED_RING_TX(_n)				(0x300 + (_n) * 0x10)
-+
-+#define MTK_WED_RING_RX(_n)				(0x400 + (_n) * 0x10)
-+
-+#define MTK_WED_WPDMA_INT_TRIGGER			0x504
-+#define MTK_WED_WPDMA_INT_TRIGGER_RX_DONE		BIT(1)
-+#define MTK_WED_WPDMA_INT_TRIGGER_TX_DONE		GENMASK(5, 4)
-+
-+#define MTK_WED_WPDMA_GLO_CFG				0x508
-+#define MTK_WED_WPDMA_GLO_CFG_TX_DRV_EN			BIT(0)
-+#define MTK_WED_WPDMA_GLO_CFG_TX_DRV_BUSY		BIT(1)
-+#define MTK_WED_WPDMA_GLO_CFG_RX_DRV_EN			BIT(2)
-+#define MTK_WED_WPDMA_GLO_CFG_RX_DRV_BUSY		BIT(3)
-+#define MTK_WED_WPDMA_GLO_CFG_RX_BT_SIZE		GENMASK(5, 4)
-+#define MTK_WED_WPDMA_GLO_CFG_TX_WB_DDONE		BIT(6)
-+#define MTK_WED_WPDMA_GLO_CFG_BIG_ENDIAN		BIT(7)
-+#define MTK_WED_WPDMA_GLO_CFG_DIS_BT_SIZE_ALIGN		BIT(8)
-+#define MTK_WED_WPDMA_GLO_CFG_TX_BT_SIZE_LO		BIT(9)
-+#define MTK_WED_WPDMA_GLO_CFG_MULTI_DMA_EN		GENMASK(11, 10)
-+#define MTK_WED_WPDMA_GLO_CFG_FIFO_LITTLE_ENDIAN	BIT(12)
-+#define MTK_WED_WPDMA_GLO_CFG_MI_DEPTH_RD		GENMASK(21, 13)
-+#define MTK_WED_WPDMA_GLO_CFG_TX_BT_SIZE_HI		GENMASK(23, 22)
-+#define MTK_WED_WPDMA_GLO_CFG_SW_RESET			BIT(24)
-+#define MTK_WED_WPDMA_GLO_CFG_FIRST_TOKEN_ONLY		BIT(26)
-+#define MTK_WED_WPDMA_GLO_CFG_OMIT_RX_INFO		BIT(27)
-+#define MTK_WED_WPDMA_GLO_CFG_OMIT_TX_INFO		BIT(28)
-+#define MTK_WED_WPDMA_GLO_CFG_BYTE_SWAP			BIT(29)
-+#define MTK_WED_WPDMA_GLO_CFG_RX_2B_OFFSET		BIT(31)
-+
-+#define MTK_WED_WPDMA_RESET_IDX				0x50c
-+#define MTK_WED_WPDMA_RESET_IDX_TX			GENMASK(3, 0)
-+#define MTK_WED_WPDMA_RESET_IDX_RX			GENMASK(17, 16)
-+
-+#define MTK_WED_WPDMA_INT_CTRL				0x520
-+#define MTK_WED_WPDMA_INT_CTRL_SUBRT_ADV		BIT(21)
-+
-+#define MTK_WED_WPDMA_INT_MASK				0x524
-+
-+#define MTK_WED_PCIE_CFG_BASE				0x560
-+
-+#define MTK_WED_PCIE_INT_TRIGGER			0x570
-+#define MTK_WED_PCIE_INT_TRIGGER_STATUS			BIT(16)
-+
-+#define MTK_WED_WPDMA_CFG_BASE				0x580
-+
-+#define MTK_WED_WPDMA_TX_MIB(_n)			(0x5a0 + (_n) * 4)
-+#define MTK_WED_WPDMA_TX_COHERENT_MIB(_n)		(0x5d0 + (_n) * 4)
-+
-+#define MTK_WED_WPDMA_RING_TX(_n)			(0x600 + (_n) * 0x10)
-+#define MTK_WED_WPDMA_RING_RX(_n)			(0x700 + (_n) * 0x10)
-+#define MTK_WED_WDMA_RING_RX(_n)			(0x900 + (_n) * 0x10)
-+#define MTK_WED_WDMA_RX_THRES(_n)			(0x940 + (_n) * 0x4)
-+
-+#define MTK_WED_WDMA_GLO_CFG				0xa04
-+#define MTK_WED_WDMA_GLO_CFG_TX_DRV_EN			BIT(0)
-+#define MTK_WED_WDMA_GLO_CFG_RX_DRV_EN			BIT(2)
-+#define MTK_WED_WDMA_GLO_CFG_RX_DRV_BUSY		BIT(3)
-+#define MTK_WED_WDMA_GLO_CFG_BT_SIZE			GENMASK(5, 4)
-+#define MTK_WED_WDMA_GLO_CFG_TX_WB_DDONE		BIT(6)
-+#define MTK_WED_WDMA_GLO_CFG_RX_DIS_FSM_AUTO_IDLE	BIT(13)
-+#define MTK_WED_WDMA_GLO_CFG_WCOMPLETE_SEL		BIT(16)
-+#define MTK_WED_WDMA_GLO_CFG_INIT_PHASE_RXDMA_BYPASS	BIT(17)
-+#define MTK_WED_WDMA_GLO_CFG_INIT_PHASE_BYPASS		BIT(18)
-+#define MTK_WED_WDMA_GLO_CFG_FSM_RETURN_IDLE		BIT(19)
-+#define MTK_WED_WDMA_GLO_CFG_WAIT_COHERENT		BIT(20)
-+#define MTK_WED_WDMA_GLO_CFG_AXI_W_AFTER_AW		BIT(21)
-+#define MTK_WED_WDMA_GLO_CFG_IDLE_DMAD_SUPPLY_SINGLE_W	BIT(22)
-+#define MTK_WED_WDMA_GLO_CFG_IDLE_DMAD_SUPPLY		BIT(23)
-+#define MTK_WED_WDMA_GLO_CFG_DYNAMIC_SKIP_DMAD_PREP	BIT(24)
-+#define MTK_WED_WDMA_GLO_CFG_DYNAMIC_DMAD_RECYCLE	BIT(25)
-+#define MTK_WED_WDMA_GLO_CFG_RST_INIT_COMPLETE		BIT(26)
-+#define MTK_WED_WDMA_GLO_CFG_RXDRV_CLKGATE_BYPASS	BIT(30)
-+
-+#define MTK_WED_WDMA_RESET_IDX				0xa08
-+#define MTK_WED_WDMA_RESET_IDX_RX			GENMASK(17, 16)
-+#define MTK_WED_WDMA_RESET_IDX_DRV			GENMASK(25, 24)
-+
-+#define MTK_WED_WDMA_INT_TRIGGER			0xa28
-+#define MTK_WED_WDMA_INT_TRIGGER_RX_DONE		GENMASK(17, 16)
-+
-+#define MTK_WED_WDMA_INT_CTRL				0xa2c
-+#define MTK_WED_WDMA_INT_CTRL_POLL_SRC_SEL		GENMASK(17, 16)
-+
-+#define MTK_WED_WDMA_OFFSET0				0xaa4
-+#define MTK_WED_WDMA_OFFSET1				0xaa8
-+
-+#define MTK_WED_WDMA_RX_MIB(_n)				(0xae0 + (_n) * 4)
-+#define MTK_WED_WDMA_RX_RECYCLE_MIB(_n)			(0xae8 + (_n) * 4)
-+#define MTK_WED_WDMA_RX_PROCESSED_MIB(_n)		(0xaf0 + (_n) * 4)
-+
-+#define MTK_WED_RING_OFS_BASE				0x00
-+#define MTK_WED_RING_OFS_COUNT				0x04
-+#define MTK_WED_RING_OFS_CPU_IDX			0x08
-+#define MTK_WED_RING_OFS_DMA_IDX			0x0c
-+
-+#define MTK_WDMA_RING_RX(_n)				(0x100 + (_n) * 0x10)
-+
-+#define MTK_WDMA_GLO_CFG				0x204
-+#define MTK_WDMA_GLO_CFG_RX_INFO_PRERES			GENMASK(28, 26)
-+
-+#define MTK_WDMA_RESET_IDX				0x208
-+#define MTK_WDMA_RESET_IDX_TX				GENMASK(3, 0)
-+#define MTK_WDMA_RESET_IDX_RX				GENMASK(17, 16)
-+
-+#define MTK_WDMA_INT_MASK				0x228
-+#define MTK_WDMA_INT_MASK_TX_DONE			GENMASK(3, 0)
-+#define MTK_WDMA_INT_MASK_RX_DONE			GENMASK(17, 16)
-+#define MTK_WDMA_INT_MASK_TX_DELAY			BIT(28)
-+#define MTK_WDMA_INT_MASK_TX_COHERENT			BIT(29)
-+#define MTK_WDMA_INT_MASK_RX_DELAY			BIT(30)
-+#define MTK_WDMA_INT_MASK_RX_COHERENT			BIT(31)
-+
-+#define MTK_WDMA_INT_GRP1				0x250
-+#define MTK_WDMA_INT_GRP2				0x254
-+
-+#define MTK_PCIE_MIRROR_MAP(n)				((n) ? 0x4 : 0x0)
-+#define MTK_PCIE_MIRROR_MAP_EN				BIT(0)
-+#define MTK_PCIE_MIRROR_MAP_WED_ID			BIT(1)
-+
-+/* DMA channel mapping */
-+#define HIFSYS_DMA_AG_MAP				0x008
-+
-+#endif
---- /dev/null
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -0,0 +1,131 @@
-+#ifndef __MTK_WED_H
-+#define __MTK_WED_H
-+
-+#include <linux/kernel.h>
-+#include <linux/rcupdate.h>
-+#include <linux/regmap.h>
-+#include <linux/pci.h>
-+
-+#define MTK_WED_TX_QUEUES		2
-+
-+struct mtk_wed_hw;
-+struct mtk_wdma_desc;
-+
-+struct mtk_wed_ring {
-+	struct mtk_wdma_desc *desc;
-+	dma_addr_t desc_phys;
-+	int size;
-+
-+	u32 reg_base;
-+	void __iomem *wpdma;
-+};
-+
-+struct mtk_wed_device {
-+#ifdef CONFIG_NET_MEDIATEK_SOC_WED
-+	const struct mtk_wed_ops *ops;
-+	struct device *dev;
-+	struct mtk_wed_hw *hw;
-+	bool init_done, running;
-+	int wdma_idx;
-+	int irq;
-+
-+	struct mtk_wed_ring tx_ring[MTK_WED_TX_QUEUES];
-+	struct mtk_wed_ring txfree_ring;
-+	struct mtk_wed_ring tx_wdma[MTK_WED_TX_QUEUES];
-+
-+	struct {
-+		int size;
-+		void **pages;
-+		struct mtk_wdma_desc *desc;
-+		dma_addr_t desc_phys;
-+	} buf_ring;
-+
-+	/* filled by driver: */
-+	struct {
-+		struct pci_dev *pci_dev;
-+
-+		u32 wpdma_phys;
-+
-+		u16 token_start;
-+		unsigned int nbuf;
-+
-+		u32 (*init_buf)(void *ptr, dma_addr_t phys, int token_id);
-+		int (*offload_enable)(struct mtk_wed_device *wed);
-+		void (*offload_disable)(struct mtk_wed_device *wed);
-+	} wlan;
-+#endif
-+};
-+
-+struct mtk_wed_ops {
-+	int (*attach)(struct mtk_wed_device *dev);
-+	int (*tx_ring_setup)(struct mtk_wed_device *dev, int ring,
-+			     void __iomem *regs);
-+	int (*txfree_ring_setup)(struct mtk_wed_device *dev,
-+				 void __iomem *regs);
-+	void (*detach)(struct mtk_wed_device *dev);
-+
-+	void (*stop)(struct mtk_wed_device *dev);
-+	void (*start)(struct mtk_wed_device *dev, u32 irq_mask);
-+	void (*reset_dma)(struct mtk_wed_device *dev);
-+
-+	u32 (*reg_read)(struct mtk_wed_device *dev, u32 reg);
-+	void (*reg_write)(struct mtk_wed_device *dev, u32 reg, u32 val);
-+
-+	u32 (*irq_get)(struct mtk_wed_device *dev, u32 mask);
-+	void (*irq_set_mask)(struct mtk_wed_device *dev, u32 mask);
-+};
-+
-+extern const struct mtk_wed_ops __rcu *mtk_soc_wed_ops;
-+
-+static inline int
-+mtk_wed_device_attach(struct mtk_wed_device *dev)
-+{
-+	int ret = -ENODEV;
-+
-+#ifdef CONFIG_NET_MEDIATEK_SOC_WED
-+	rcu_read_lock();
-+	dev->ops = rcu_dereference(mtk_soc_wed_ops);
-+	if (dev->ops)
-+		ret = dev->ops->attach(dev);
-+	else
-+		rcu_read_unlock();
-+
-+	if (ret)
-+		dev->ops = NULL;
-+#endif
-+
-+	return ret;
-+}
-+
-+#ifdef CONFIG_NET_MEDIATEK_SOC_WED
-+#define mtk_wed_device_active(_dev) !!(_dev)->ops
-+#define mtk_wed_device_detach(_dev) (_dev)->ops->detach(_dev)
-+#define mtk_wed_device_start(_dev, _mask) (_dev)->ops->start(_dev, _mask)
-+#define mtk_wed_device_tx_ring_setup(_dev, _ring, _regs) \
-+	(_dev)->ops->tx_ring_setup(_dev, _ring, _regs)
-+#define mtk_wed_device_txfree_ring_setup(_dev, _regs) \
-+	(_dev)->ops->txfree_ring_setup(_dev, _regs)
-+#define mtk_wed_device_reg_read(_dev, _reg) \
-+	(_dev)->ops->reg_read(_dev, _reg)
-+#define mtk_wed_device_reg_write(_dev, _reg, _val) \
-+	(_dev)->ops->reg_write(_dev, _reg, _val)
-+#define mtk_wed_device_irq_get(_dev, _mask) \
-+	(_dev)->ops->irq_get(_dev, _mask)
-+#define mtk_wed_device_irq_set_mask(_dev, _mask) \
-+	(_dev)->ops->irq_set_mask(_dev, _mask)
-+#else
-+static inline bool mtk_wed_device_active(struct mtk_wed_device *dev)
-+{
-+	return false;
-+}
-+#define mtk_wed_device_detach(_dev) do {} while (0)
-+#define mtk_wed_device_start(_dev, _mask) do {} while (0)
-+#define mtk_wed_device_tx_ring_setup(_dev, _ring, _regs) -ENODEV
-+#define mtk_wed_device_txfree_ring_setup(_dev, _ring, _regs) -ENODEV
-+#define mtk_wed_device_reg_read(_dev, _reg) 0
-+#define mtk_wed_device_reg_write(_dev, _reg, _val) do {} while (0)
-+#define mtk_wed_device_irq_get(_dev, _mask) 0
-+#define mtk_wed_device_irq_set_mask(_dev, _mask) do {} while (0)
-+#endif
-+
-+#endif
diff --git a/target/linux/generic/pending-5.10/701-03-net-ethernet-mtk_eth_soc-implement-flow-offloading-t.patch b/target/linux/generic/pending-5.10/701-03-net-ethernet-mtk_eth_soc-implement-flow-offloading-t.patch
deleted file mode 100644
index b9c6d4378a10..000000000000
--- a/target/linux/generic/pending-5.10/701-03-net-ethernet-mtk_eth_soc-implement-flow-offloading-t.patch
+++ /dev/null
@@ -1,269 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 5 Feb 2022 18:29:22 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: implement flow offloading
- to WED devices
-
-This allows hardware flow offloading from Ethernet to WLAN on MT7622 SoC
-
-Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -329,6 +329,24 @@ int mtk_foe_entry_set_pppoe(struct mtk_f
- 	return 0;
- }
- 
-+int mtk_foe_entry_set_wdma(struct mtk_foe_entry *entry, int wdma_idx, int txq,
-+			   int bss, int wcid)
-+{
-+	struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(entry);
-+	u32 *ib2 = mtk_foe_entry_ib2(entry);
-+
-+	*ib2 &= ~MTK_FOE_IB2_PORT_MG;
-+	*ib2 |= MTK_FOE_IB2_WDMA_WINFO;
-+	if (wdma_idx)
-+		*ib2 |= MTK_FOE_IB2_WDMA_DEVIDX;
-+
-+	l2->vlan2 = FIELD_PREP(MTK_FOE_VLAN2_WINFO_BSS, bss) |
-+		    FIELD_PREP(MTK_FOE_VLAN2_WINFO_WCID, wcid) |
-+		    FIELD_PREP(MTK_FOE_VLAN2_WINFO_RING, txq);
-+
-+	return 0;
-+}
-+
- static inline bool mtk_foe_entry_usable(struct mtk_foe_entry *entry)
- {
- 	return !(entry->ib1 & MTK_FOE_IB1_STATIC) &&
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -48,9 +48,9 @@ enum {
- #define MTK_FOE_IB2_DEST_PORT		GENMASK(7, 5)
- #define MTK_FOE_IB2_MULTICAST		BIT(8)
- 
--#define MTK_FOE_IB2_WHNAT_QID2		GENMASK(13, 12)
--#define MTK_FOE_IB2_WHNAT_DEVIDX	BIT(16)
--#define MTK_FOE_IB2_WHNAT_NAT		BIT(17)
-+#define MTK_FOE_IB2_WDMA_QID2		GENMASK(13, 12)
-+#define MTK_FOE_IB2_WDMA_DEVIDX		BIT(16)
-+#define MTK_FOE_IB2_WDMA_WINFO		BIT(17)
- 
- #define MTK_FOE_IB2_PORT_MG		GENMASK(17, 12)
- 
-@@ -58,9 +58,9 @@ enum {
- 
- #define MTK_FOE_IB2_DSCP		GENMASK(31, 24)
- 
--#define MTK_FOE_VLAN2_WHNAT_BSS		GEMMASK(5, 0)
--#define MTK_FOE_VLAN2_WHNAT_WCID	GENMASK(13, 6)
--#define MTK_FOE_VLAN2_WHNAT_RING	GENMASK(15, 14)
-+#define MTK_FOE_VLAN2_WINFO_BSS		GENMASK(5, 0)
-+#define MTK_FOE_VLAN2_WINFO_WCID	GENMASK(13, 6)
-+#define MTK_FOE_VLAN2_WINFO_RING	GENMASK(15, 14)
- 
- enum {
- 	MTK_FOE_STATE_INVALID,
-@@ -281,6 +281,8 @@ int mtk_foe_entry_set_ipv6_tuple(struct
- int mtk_foe_entry_set_dsa(struct mtk_foe_entry *entry, int port);
- int mtk_foe_entry_set_vlan(struct mtk_foe_entry *entry, int vid);
- int mtk_foe_entry_set_pppoe(struct mtk_foe_entry *entry, int sid);
-+int mtk_foe_entry_set_wdma(struct mtk_foe_entry *entry, int wdma_idx, int txq,
-+			   int bss, int wcid);
- int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_foe_entry *entry,
- 			 u16 timestamp);
- int mtk_ppe_debugfs_init(struct mtk_ppe *ppe);
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -11,6 +11,7 @@
- #include <net/pkt_cls.h>
- #include <net/dsa.h>
- #include "mtk_eth_soc.h"
-+#include "mtk_wed.h"
- 
- struct mtk_flow_data {
- 	struct ethhdr eth;
-@@ -40,6 +41,7 @@ struct mtk_flow_entry {
- 	struct rhash_head node;
- 	unsigned long cookie;
- 	u16 hash;
-+	s8 wed_index;
- };
- 
- static const struct rhashtable_params mtk_flow_ht_params = {
-@@ -81,6 +83,35 @@ mtk_flow_offload_mangle_eth(const struct
- 	memcpy(dest, src, act->mangle.mask ? 2 : 4);
- }
- 
-+static int
-+mtk_flow_get_wdma_info(struct net_device *dev, const u8 *addr, struct mtk_wdma_info *info)
-+{
-+	struct net_device_path_ctx ctx = {
-+		.dev = dev,
-+		.daddr = addr,
-+	};
-+	struct net_device_path path = {};
-+
-+	if (!IS_ENABLED(CONFIG_NET_MEDIATEK_SOC_WED))
-+		return -1;
-+
-+	if (!dev->netdev_ops->ndo_fill_forward_path)
-+		return -1;
-+
-+	if (dev->netdev_ops->ndo_fill_forward_path(&ctx, &path))
-+		return -1;
-+
-+	if (path.type != DEV_PATH_MTK_WDMA)
-+		return -1;
-+
-+	info->wdma_idx = path.mtk_wdma.wdma_idx;
-+	info->queue = path.mtk_wdma.queue;
-+	info->bss = path.mtk_wdma.bss;
-+	info->wcid = path.mtk_wdma.wcid;
-+
-+	return 0;
-+}
-+
- 
- static int
- mtk_flow_mangle_ports(const struct flow_action_entry *act,
-@@ -150,10 +181,20 @@ mtk_flow_get_dsa_port(struct net_device
- 
- static int
- mtk_flow_set_output_device(struct mtk_eth *eth, struct mtk_foe_entry *foe,
--			   struct net_device *dev)
-+			   struct net_device *dev, const u8 *dest_mac,
-+			   int *wed_index)
- {
-+	struct mtk_wdma_info info = {};
- 	int pse_port, dsa_port;
- 
-+	if (mtk_flow_get_wdma_info(dev, dest_mac, &info) == 0) {
-+		mtk_foe_entry_set_wdma(foe, info.wdma_idx, info.queue, info.bss,
-+				       info.wcid);
-+		pse_port = 3;
-+		*wed_index = info.wdma_idx;
-+		goto out;
-+	}
-+
- 	dsa_port = mtk_flow_get_dsa_port(&dev);
- 	if (dsa_port >= 0)
- 		mtk_foe_entry_set_dsa(foe, dsa_port);
-@@ -165,6 +206,7 @@ mtk_flow_set_output_device(struct mtk_et
- 	else
- 		return -EOPNOTSUPP;
- 
-+out:
- 	mtk_foe_entry_set_pse_port(foe, pse_port);
- 
- 	return 0;
-@@ -180,6 +222,7 @@ mtk_flow_offload_replace(struct mtk_eth
- 	struct net_device *odev = NULL;
- 	struct mtk_flow_entry *entry;
- 	int offload_type = 0;
-+	int wed_index = -1;
- 	u16 addr_type = 0;
- 	u32 timestamp;
- 	u8 l4proto = 0;
-@@ -327,10 +370,14 @@ mtk_flow_offload_replace(struct mtk_eth
- 	if (data.pppoe.num == 1)
- 		mtk_foe_entry_set_pppoe(&foe, data.pppoe.sid);
- 
--	err = mtk_flow_set_output_device(eth, &foe, odev);
-+	err = mtk_flow_set_output_device(eth, &foe, odev, data.eth.h_dest,
-+					 &wed_index);
- 	if (err)
- 		return err;
- 
-+	if (wed_index >= 0 && (err = mtk_wed_flow_add(wed_index)) < 0)
-+		return err;
-+
- 	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
- 	if (!entry)
- 		return -ENOMEM;
-@@ -344,6 +391,7 @@ mtk_flow_offload_replace(struct mtk_eth
- 	}
- 
- 	entry->hash = hash;
-+	entry->wed_index = wed_index;
- 	err = rhashtable_insert_fast(&eth->flow_table, &entry->node,
- 				     mtk_flow_ht_params);
- 	if (err < 0)
-@@ -354,6 +402,8 @@ clear_flow:
- 	mtk_foe_entry_clear(&eth->ppe, hash);
- free:
- 	kfree(entry);
-+	if (wed_index >= 0)
-+	    mtk_wed_flow_remove(wed_index);
- 	return err;
- }
- 
-@@ -370,6 +420,8 @@ mtk_flow_offload_destroy(struct mtk_eth
- 	mtk_foe_entry_clear(&eth->ppe, entry->hash);
- 	rhashtable_remove_fast(&eth->flow_table, &entry->node,
- 			       mtk_flow_ht_params);
-+	if (entry->wed_index >= 0)
-+		mtk_wed_flow_remove(entry->wed_index);
- 	kfree(entry);
- 
- 	return 0;
---- a/drivers/net/ethernet/mediatek/mtk_wed.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.h
-@@ -7,6 +7,7 @@
- #include <linux/soc/mediatek/mtk_wed.h>
- #include <linux/debugfs.h>
- #include <linux/regmap.h>
-+#include <linux/netdevice.h>
- 
- struct mtk_eth;
- 
-@@ -27,6 +28,12 @@ struct mtk_wed_hw {
- 	int index;
- };
- 
-+struct mtk_wdma_info {
-+	u8 wdma_idx;
-+	u8 queue;
-+	u16 wcid;
-+	u8 bss;
-+};
- 
- #ifdef CONFIG_NET_MEDIATEK_SOC_WED
- static inline void
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -856,6 +856,7 @@ enum net_device_path_type {
- 	DEV_PATH_BRIDGE,
- 	DEV_PATH_PPPOE,
- 	DEV_PATH_DSA,
-+	DEV_PATH_MTK_WDMA,
- };
- 
- struct net_device_path {
-@@ -881,6 +882,12 @@ struct net_device_path {
- 			int port;
- 			u16 proto;
- 		} dsa;
-+		struct {
-+			u8 wdma_idx;
-+			u8 queue;
-+			u16 wcid;
-+			u8 bss;
-+		} mtk_wdma;
- 	};
- };
- 
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -883,6 +883,10 @@ int dev_fill_forward_path(const struct n
- 		if (WARN_ON_ONCE(last_dev == ctx.dev))
- 			return -1;
- 	}
-+
-+	if (!ctx.dev)
-+		return ret;
-+
- 	path = dev_fwd_path(stack);
- 	if (!path)
- 		return -1;
diff --git a/target/linux/generic/pending-5.10/701-04-arm64-dts-mediatek-mt7622-introduce-nodes-for-Wirele.patch b/target/linux/generic/pending-5.10/701-04-arm64-dts-mediatek-mt7622-introduce-nodes-for-Wirele.patch
deleted file mode 100644
index f59a364a736f..000000000000
--- a/target/linux/generic/pending-5.10/701-04-arm64-dts-mediatek-mt7622-introduce-nodes-for-Wirele.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 5 Feb 2022 18:36:36 +0100
-Subject: [PATCH] arm64: dts: mediatek: mt7622: introduce nodes for
- Wireless Ethernet Dispatch
-
-Introduce wed0 and wed1 nodes in order to enable offloading forwarding
-between ethernet and wireless devices on the mt7622 chipset.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
-@@ -893,6 +893,11 @@
- 		};
- 	};
- 
-+	hifsys: syscon@1af00000 {
-+		compatible = "mediatek,mt7622-hifsys", "syscon";
-+		reg = <0 0x1af00000 0 0x70>;
-+	};
-+
- 	ethsys: syscon@1b000000 {
- 		compatible = "mediatek,mt7622-ethsys",
- 			     "syscon";
-@@ -911,6 +916,26 @@
- 		#dma-cells = <1>;
- 	};
- 
-+	pcie_mirror: pcie-mirror@10000400 {
-+		compatible = "mediatek,mt7622-pcie-mirror",
-+			     "syscon";
-+		reg = <0 0x10000400 0 0x10>;
-+	};
-+
-+	wed0: wed@1020a000 {
-+		compatible = "mediatek,mt7622-wed",
-+			     "syscon";
-+		reg = <0 0x1020a000 0 0x1000>;
-+		interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
-+	};
-+
-+	wed1: wed@1020b000 {
-+		compatible = "mediatek,mt7622-wed",
-+			     "syscon";
-+		reg = <0 0x1020b000 0 0x1000>;
-+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_LOW>;
-+	};
-+
- 	eth: ethernet@1b100000 {
- 		compatible = "mediatek,mt7622-eth",
- 			     "mediatek,mt2701-eth",
-@@ -938,6 +963,9 @@
- 		mediatek,ethsys = <&ethsys>;
- 		mediatek,sgmiisys = <&sgmiisys>;
- 		mediatek,cci-control = <&cci_control2>;
-+		mediatek,wed = <&wed0>, <&wed1>;
-+		mediatek,pcie-mirror = <&pcie_mirror>;
-+		mediatek,hifsys = <&hifsys>;
- 		dma-coherent;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
diff --git a/target/linux/generic/pending-5.10/701-05-net-ethernet-mtk_eth_soc-add-ipv6-flow-offload-suppo.patch b/target/linux/generic/pending-5.10/701-05-net-ethernet-mtk_eth_soc-add-ipv6-flow-offload-suppo.patch
deleted file mode 100644
index 925c16ac69bb..000000000000
--- a/target/linux/generic/pending-5.10/701-05-net-ethernet-mtk_eth_soc-add-ipv6-flow-offload-suppo.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From: David Bentham <db260179@gmail.com>
-Date: Mon, 21 Feb 2022 15:36:16 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: add ipv6 flow offload
- support
-
-Add the missing IPv6 flow offloading support for routing only.
-Hardware flow offloading is done by the packet processing engine (PPE)
-of the Ethernet MAC and as it doesn't support mangling of IPv6 packets,
-IPv6 NAT cannot be supported.
-
-Signed-off-by: David Bentham <db260179@gmail.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -7,6 +7,7 @@
- #include <linux/rhashtable.h>
- #include <linux/if_ether.h>
- #include <linux/ip.h>
-+#include <linux/ipv6.h>
- #include <net/flow_offload.h>
- #include <net/pkt_cls.h>
- #include <net/dsa.h>
-@@ -21,6 +22,11 @@ struct mtk_flow_data {
- 			__be32 src_addr;
- 			__be32 dst_addr;
- 		} v4;
-+
-+		struct {
-+			struct in6_addr src_addr;
-+			struct in6_addr dst_addr;
-+		} v6;
- 	};
- 
- 	__be16 src_port;
-@@ -66,6 +72,14 @@ mtk_flow_set_ipv4_addr(struct mtk_foe_en
- 					    data->v4.dst_addr, data->dst_port);
- }
- 
-+static int
-+mtk_flow_set_ipv6_addr(struct mtk_foe_entry *foe, struct mtk_flow_data *data)
-+{
-+	return mtk_foe_entry_set_ipv6_tuple(foe,
-+					    data->v6.src_addr.s6_addr32, data->src_port,
-+					    data->v6.dst_addr.s6_addr32, data->dst_port);
-+}
-+
- static void
- mtk_flow_offload_mangle_eth(const struct flow_action_entry *act, void *eth)
- {
-@@ -297,6 +311,9 @@ mtk_flow_offload_replace(struct mtk_eth
- 	case FLOW_DISSECTOR_KEY_IPV4_ADDRS:
- 		offload_type = MTK_PPE_PKT_TYPE_IPV4_HNAPT;
- 		break;
-+	case FLOW_DISSECTOR_KEY_IPV6_ADDRS:
-+		offload_type = MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T;
-+		break;
- 	default:
- 		return -EOPNOTSUPP;
- 	}
-@@ -332,6 +349,17 @@ mtk_flow_offload_replace(struct mtk_eth
- 		mtk_flow_set_ipv4_addr(&foe, &data, false);
- 	}
- 
-+	if (addr_type == FLOW_DISSECTOR_KEY_IPV6_ADDRS) {
-+		struct flow_match_ipv6_addrs addrs;
-+
-+		flow_rule_match_ipv6_addrs(rule, &addrs);
-+
-+		data.v6.src_addr = addrs.key->src;
-+		data.v6.dst_addr = addrs.key->dst;
-+
-+		mtk_flow_set_ipv6_addr(&foe, &data);
-+	}
-+
- 	flow_action_for_each(i, act, &rule->action) {
- 		if (act->id != FLOW_ACTION_MANGLE)
- 			continue;
diff --git a/target/linux/generic/pending-5.10/701-06-net-ethernet-mtk_eth_soc-support-TC_SETUP_BLOCK-for-.patch b/target/linux/generic/pending-5.10/701-06-net-ethernet-mtk_eth_soc-support-TC_SETUP_BLOCK-for-.patch
deleted file mode 100644
index 1950d81ebbac..000000000000
--- a/target/linux/generic/pending-5.10/701-06-net-ethernet-mtk_eth_soc-support-TC_SETUP_BLOCK-for-.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 21 Feb 2022 15:37:21 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: support TC_SETUP_BLOCK for
- PPE offload
-
-This allows offload entries to be created from user space
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -564,10 +564,13 @@ mtk_eth_setup_tc_block(struct net_device
- int mtk_eth_setup_tc(struct net_device *dev, enum tc_setup_type type,
- 		     void *type_data)
- {
--	if (type == TC_SETUP_FT)
-+	switch (type) {
-+	case TC_SETUP_BLOCK:
-+	case TC_SETUP_FT:
- 		return mtk_eth_setup_tc_block(dev, type_data);
--
--	return -EOPNOTSUPP;
-+	default:
-+		return -EOPNOTSUPP;
-+	}
- }
- 
- int mtk_eth_offload_init(struct mtk_eth *eth)
diff --git a/target/linux/generic/pending-5.10/701-07-net-ethernet-mtk_eth_soc-allocate-struct-mtk_ppe-sep.patch b/target/linux/generic/pending-5.10/701-07-net-ethernet-mtk_eth_soc-allocate-struct-mtk_ppe-sep.patch
deleted file mode 100644
index 87fb1f49d688..000000000000
--- a/target/linux/generic/pending-5.10/701-07-net-ethernet-mtk_eth_soc-allocate-struct-mtk_ppe-sep.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 21 Feb 2022 15:38:20 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: allocate struct mtk_ppe
- separately
-
-Preparation for adding more data to it, which will increase its size.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2330,7 +2330,7 @@ static int mtk_open(struct net_device *d
- 			return err;
- 		}
- 
--		if (eth->soc->offload_version && mtk_ppe_start(&eth->ppe) == 0)
-+		if (eth->soc->offload_version && mtk_ppe_start(eth->ppe) == 0)
- 			gdm_config = MTK_GDMA_TO_PPE;
- 
- 		mtk_gdm_config(eth, gdm_config);
-@@ -2404,7 +2404,7 @@ static int mtk_stop(struct net_device *d
- 	mtk_dma_free(eth);
- 
- 	if (eth->soc->offload_version)
--		mtk_ppe_stop(&eth->ppe);
-+		mtk_ppe_stop(eth->ppe);
- 
- 	return 0;
- }
-@@ -3290,10 +3290,11 @@ static int mtk_probe(struct platform_dev
- 	}
- 
- 	if (eth->soc->offload_version) {
--		err = mtk_ppe_init(&eth->ppe, eth->dev,
--				   eth->base + MTK_ETH_PPE_BASE, 2);
--		if (err)
-+		eth->ppe = mtk_ppe_init(eth->dev, eth->base + MTK_ETH_PPE_BASE, 2);
-+		if (!eth->ppe) {
-+			err = -ENOMEM;
- 			goto err_free_dev;
-+		}
- 
- 		err = mtk_eth_offload_init(eth);
- 		if (err)
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -977,7 +977,7 @@ struct mtk_eth {
- 	u32				rx_dma_l4_valid;
- 	int				ip_align;
- 
--	struct mtk_ppe			ppe;
-+	struct mtk_ppe			*ppe;
- 	struct rhashtable		flow_table;
- };
- 
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -384,10 +384,15 @@ int mtk_foe_entry_commit(struct mtk_ppe
- 	return hash;
- }
- 
--int mtk_ppe_init(struct mtk_ppe *ppe, struct device *dev, void __iomem *base,
-+struct mtk_ppe *mtk_ppe_init(struct device *dev, void __iomem *base,
- 		 int version)
- {
- 	struct mtk_foe_entry *foe;
-+	struct mtk_ppe *ppe;
-+
-+	ppe = devm_kzalloc(dev, sizeof(*ppe), GFP_KERNEL);
-+	if (!ppe)
-+		return NULL;
- 
- 	/* need to allocate a separate device, since it PPE DMA access is
- 	 * not coherent.
-@@ -399,13 +404,13 @@ int mtk_ppe_init(struct mtk_ppe *ppe, st
- 	foe = dmam_alloc_coherent(ppe->dev, MTK_PPE_ENTRIES * sizeof(*foe),
- 				  &ppe->foe_phys, GFP_KERNEL);
- 	if (!foe)
--		return -ENOMEM;
-+		return NULL;
- 
- 	ppe->foe_table = foe;
- 
- 	mtk_ppe_debugfs_init(ppe);
- 
--	return 0;
-+	return ppe;
- }
- 
- static void mtk_ppe_init_foe_table(struct mtk_ppe *ppe)
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -246,8 +246,7 @@ struct mtk_ppe {
- 	void *acct_table;
- };
- 
--int mtk_ppe_init(struct mtk_ppe *ppe, struct device *dev, void __iomem *base,
--		 int version);
-+struct mtk_ppe *mtk_ppe_init(struct device *dev, void __iomem *base, int version);
- int mtk_ppe_start(struct mtk_ppe *ppe);
- int mtk_ppe_stop(struct mtk_ppe *ppe);
- 
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -412,7 +412,7 @@ mtk_flow_offload_replace(struct mtk_eth
- 
- 	entry->cookie = f->cookie;
- 	timestamp = mtk_eth_timestamp(eth);
--	hash = mtk_foe_entry_commit(&eth->ppe, &foe, timestamp);
-+	hash = mtk_foe_entry_commit(eth->ppe, &foe, timestamp);
- 	if (hash < 0) {
- 		err = hash;
- 		goto free;
-@@ -427,7 +427,7 @@ mtk_flow_offload_replace(struct mtk_eth
- 
- 	return 0;
- clear_flow:
--	mtk_foe_entry_clear(&eth->ppe, hash);
-+	mtk_foe_entry_clear(eth->ppe, hash);
- free:
- 	kfree(entry);
- 	if (wed_index >= 0)
-@@ -445,7 +445,7 @@ mtk_flow_offload_destroy(struct mtk_eth
- 	if (!entry)
- 		return -ENOENT;
- 
--	mtk_foe_entry_clear(&eth->ppe, entry->hash);
-+	mtk_foe_entry_clear(eth->ppe, entry->hash);
- 	rhashtable_remove_fast(&eth->flow_table, &entry->node,
- 			       mtk_flow_ht_params);
- 	if (entry->wed_index >= 0)
-@@ -467,7 +467,7 @@ mtk_flow_offload_stats(struct mtk_eth *e
- 	if (!entry)
- 		return -ENOENT;
- 
--	timestamp = mtk_foe_entry_timestamp(&eth->ppe, entry->hash);
-+	timestamp = mtk_foe_entry_timestamp(eth->ppe, entry->hash);
- 	if (timestamp < 0)
- 		return -ETIMEDOUT;
- 
-@@ -523,7 +523,7 @@ mtk_eth_setup_tc_block(struct net_device
- 	struct flow_block_cb *block_cb;
- 	flow_setup_cb_t *cb;
- 
--	if (!eth->ppe.foe_table)
-+	if (!eth->ppe || !eth->ppe->foe_table)
- 		return -EOPNOTSUPP;
- 
- 	if (f->binder_type != FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS)
-@@ -575,7 +575,7 @@ int mtk_eth_setup_tc(struct net_device *
- 
- int mtk_eth_offload_init(struct mtk_eth *eth)
- {
--	if (!eth->ppe.foe_table)
-+	if (!eth->ppe || !eth->ppe->foe_table)
- 		return 0;
- 
- 	return rhashtable_init(&eth->flow_table, &mtk_flow_ht_params);
diff --git a/target/linux/generic/pending-5.10/701-08-net-ethernet-mtk_eth_soc-rework-hardware-flow-table-.patch b/target/linux/generic/pending-5.10/701-08-net-ethernet-mtk_eth_soc-rework-hardware-flow-table-.patch
deleted file mode 100644
index 447a7e9dcfe8..000000000000
--- a/target/linux/generic/pending-5.10/701-08-net-ethernet-mtk_eth_soc-rework-hardware-flow-table-.patch
+++ /dev/null
@@ -1,424 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 21 Feb 2022 15:39:18 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: rework hardware flow table
- management
-
-The hardware was designed to handle flow detection and creation of flow entries
-by itself, relying on the software primarily for filling in egress routing
-information.
-When there is a hash collision between multiple flows, this allows the hardware
-to maintain the entry for the most active flow.
-Additionally, the hardware only keeps offloading active for entries with at
-least 30 packets per second.
-
-With this rework, the code no longer creates a hardware entries directly.
-Instead, the hardware entry is only created when the PPE reports a matching
-unbound flow with the minimum target rate.
-In order to reduce CPU overhead, looking for flows belonging to a hash entry
-is rate limited to once every 100ms.
-
-This rework is also used as preparation for emulating bridge offload by
-managing L4 offload entries on demand.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -21,6 +21,7 @@
- #include <linux/pinctrl/devinfo.h>
- #include <linux/phylink.h>
- #include <linux/jhash.h>
-+#include <linux/bitfield.h>
- #include <net/dsa.h>
- 
- #include "mtk_eth_soc.h"
-@@ -1286,7 +1287,7 @@ static int mtk_poll_rx(struct napi_struc
- 		struct net_device *netdev;
- 		unsigned int pktlen;
- 		dma_addr_t dma_addr;
--		u32 hash;
-+		u32 hash, reason;
- 		int mac;
- 
- 		ring = mtk_get_rx_ring(eth);
-@@ -1365,6 +1366,11 @@ static int mtk_poll_rx(struct napi_struc
- 			skb_set_hash(skb, hash, PKT_HASH_TYPE_L4);
- 		}
- 
-+		reason = FIELD_GET(MTK_RXD4_PPE_CPU_REASON, trxd.rxd4);
-+		if (reason == MTK_PPE_CPU_REASON_HIT_UNBIND_RATE_REACHED)
-+			mtk_ppe_check_skb(eth->ppe, skb,
-+					  trxd.rxd4 & MTK_RXD4_FOE_ENTRY);
-+
- 		if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX &&
- 		    (trxd.rxd2 & RX_DMA_VTAG))
- 			__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
-@@ -3290,7 +3296,7 @@ static int mtk_probe(struct platform_dev
- 	}
- 
- 	if (eth->soc->offload_version) {
--		eth->ppe = mtk_ppe_init(eth->dev, eth->base + MTK_ETH_PPE_BASE, 2);
-+		eth->ppe = mtk_ppe_init(eth, eth->base + MTK_ETH_PPE_BASE, 2);
- 		if (!eth->ppe) {
- 			err = -ENOMEM;
- 			goto err_free_dev;
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -6,9 +6,12 @@
- #include <linux/iopoll.h>
- #include <linux/etherdevice.h>
- #include <linux/platform_device.h>
-+#include "mtk_eth_soc.h"
- #include "mtk_ppe.h"
- #include "mtk_ppe_regs.h"
- 
-+static DEFINE_SPINLOCK(ppe_lock);
-+
- static void ppe_w32(struct mtk_ppe *ppe, u32 reg, u32 val)
- {
- 	writel(val, ppe->base + reg);
-@@ -41,6 +44,11 @@ static u32 ppe_clear(struct mtk_ppe *ppe
- 	return ppe_m32(ppe, reg, val, 0);
- }
- 
-+static u32 mtk_eth_timestamp(struct mtk_eth *eth)
-+{
-+	return mtk_r32(eth, 0x0010) & MTK_FOE_IB1_BIND_TIMESTAMP;
-+}
-+
- static int mtk_ppe_wait_busy(struct mtk_ppe *ppe)
- {
- 	int ret;
-@@ -353,26 +361,59 @@ static inline bool mtk_foe_entry_usable(
- 	       FIELD_GET(MTK_FOE_IB1_STATE, entry->ib1) != MTK_FOE_STATE_BIND;
- }
- 
--int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_foe_entry *entry,
--			 u16 timestamp)
-+static bool
-+mtk_flow_entry_match(struct mtk_flow_entry *entry, struct mtk_foe_entry *data)
-+{
-+	int type, len;
-+
-+	if ((data->ib1 ^ entry->data.ib1) & MTK_FOE_IB1_UDP)
-+		return false;
-+
-+	type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->data.ib1);
-+	if (type > MTK_PPE_PKT_TYPE_IPV4_DSLITE)
-+		len = offsetof(struct mtk_foe_entry, ipv6._rsv);
-+	else
-+		len = offsetof(struct mtk_foe_entry, ipv4.ib2);
-+
-+	return !memcmp(&entry->data.data, &data->data, len - 4);
-+}
-+
-+static void
-+mtk_flow_entry_update(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
- {
- 	struct mtk_foe_entry *hwe;
--	u32 hash;
-+	struct mtk_foe_entry foe;
- 
-+	spin_lock_bh(&ppe_lock);
-+	if (entry->hash == 0xffff)
-+		goto out;
-+
-+	hwe = &ppe->foe_table[entry->hash];
-+	memcpy(&foe, hwe, sizeof(foe));
-+	if (!mtk_flow_entry_match(entry, &foe)) {
-+		entry->hash = 0xffff;
-+		goto out;
-+	}
-+
-+	entry->data.ib1 = foe.ib1;
-+
-+out:
-+	spin_unlock_bh(&ppe_lock);
-+}
-+
-+static void
-+__mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_foe_entry *entry,
-+		       u16 hash)
-+{
-+	struct mtk_foe_entry *hwe;
-+	u16 timestamp;
-+
-+	timestamp = mtk_eth_timestamp(ppe->eth);
- 	timestamp &= MTK_FOE_IB1_BIND_TIMESTAMP;
- 	entry->ib1 &= ~MTK_FOE_IB1_BIND_TIMESTAMP;
- 	entry->ib1 |= FIELD_PREP(MTK_FOE_IB1_BIND_TIMESTAMP, timestamp);
- 
--	hash = mtk_ppe_hash_entry(entry);
- 	hwe = &ppe->foe_table[hash];
--	if (!mtk_foe_entry_usable(hwe)) {
--		hwe++;
--		hash++;
--
--		if (!mtk_foe_entry_usable(hwe))
--			return -ENOSPC;
--	}
--
- 	memcpy(&hwe->data, &entry->data, sizeof(hwe->data));
- 	wmb();
- 	hwe->ib1 = entry->ib1;
-@@ -380,13 +421,77 @@ int mtk_foe_entry_commit(struct mtk_ppe
- 	dma_wmb();
- 
- 	mtk_ppe_cache_clear(ppe);
-+}
- 
--	return hash;
-+void mtk_foe_entry_clear(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
-+{
-+	spin_lock_bh(&ppe_lock);
-+	hlist_del_init(&entry->list);
-+	if (entry->hash != 0xffff) {
-+		ppe->foe_table[entry->hash].ib1 &= ~MTK_FOE_IB1_STATE;
-+		ppe->foe_table[entry->hash].ib1 |= FIELD_PREP(MTK_FOE_IB1_STATE,
-+							      MTK_FOE_STATE_BIND);
-+		dma_wmb();
-+	}
-+	entry->hash = 0xffff;
-+	spin_unlock_bh(&ppe_lock);
-+}
-+
-+int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
-+{
-+	u32 hash = mtk_ppe_hash_entry(&entry->data);
-+
-+	entry->hash = 0xffff;
-+	spin_lock_bh(&ppe_lock);
-+	hlist_add_head(&entry->list, &ppe->foe_flow[hash / 2]);
-+	spin_unlock_bh(&ppe_lock);
-+
-+	return 0;
-+}
-+
-+void __mtk_ppe_check_skb(struct mtk_ppe *ppe, struct sk_buff *skb, u16 hash)
-+{
-+	struct hlist_head *head = &ppe->foe_flow[hash / 2];
-+	struct mtk_flow_entry *entry;
-+	struct mtk_foe_entry *hwe = &ppe->foe_table[hash];
-+	bool found = false;
-+
-+	if (hlist_empty(head))
-+		return;
-+
-+	spin_lock_bh(&ppe_lock);
-+	hlist_for_each_entry(entry, head, list) {
-+		if (found || !mtk_flow_entry_match(entry, hwe)) {
-+			if (entry->hash != 0xffff)
-+				entry->hash = 0xffff;
-+			continue;
-+		}
-+
-+		entry->hash = hash;
-+		__mtk_foe_entry_commit(ppe, &entry->data, hash);
-+		found = true;
-+	}
-+	spin_unlock_bh(&ppe_lock);
-+}
-+
-+int mtk_foe_entry_idle_time(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
-+{
-+	u16 now = mtk_eth_timestamp(ppe->eth) & MTK_FOE_IB1_BIND_TIMESTAMP;
-+	u16 timestamp;
-+
-+	mtk_flow_entry_update(ppe, entry);
-+	timestamp = entry->data.ib1 & MTK_FOE_IB1_BIND_TIMESTAMP;
-+
-+	if (timestamp > now)
-+		return MTK_FOE_IB1_BIND_TIMESTAMP + 1 - timestamp + now;
-+	else
-+		return now - timestamp;
- }
- 
--struct mtk_ppe *mtk_ppe_init(struct device *dev, void __iomem *base,
-+struct mtk_ppe *mtk_ppe_init(struct mtk_eth *eth, void __iomem *base,
- 		 int version)
- {
-+	struct device *dev = eth->dev;
- 	struct mtk_foe_entry *foe;
- 	struct mtk_ppe *ppe;
- 
-@@ -398,6 +503,7 @@ struct mtk_ppe *mtk_ppe_init(struct devi
- 	 * not coherent.
- 	 */
- 	ppe->base = base;
-+	ppe->eth = eth;
- 	ppe->dev = dev;
- 	ppe->version = version;
- 
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -235,7 +235,17 @@ enum {
- 	MTK_PPE_CPU_REASON_INVALID			= 0x1f,
- };
- 
-+struct mtk_flow_entry {
-+	struct rhash_head node;
-+	struct hlist_node list;
-+	unsigned long cookie;
-+	struct mtk_foe_entry data;
-+	u16 hash;
-+	s8 wed_index;
-+};
-+
- struct mtk_ppe {
-+	struct mtk_eth *eth;
- 	struct device *dev;
- 	void __iomem *base;
- 	int version;
-@@ -243,18 +253,33 @@ struct mtk_ppe {
- 	struct mtk_foe_entry *foe_table;
- 	dma_addr_t foe_phys;
- 
-+	u16 foe_check_time[MTK_PPE_ENTRIES];
-+	struct hlist_head foe_flow[MTK_PPE_ENTRIES / 2];
-+
- 	void *acct_table;
- };
- 
--struct mtk_ppe *mtk_ppe_init(struct device *dev, void __iomem *base, int version);
-+struct mtk_ppe *mtk_ppe_init(struct mtk_eth *eth, void __iomem *base, int version);
- int mtk_ppe_start(struct mtk_ppe *ppe);
- int mtk_ppe_stop(struct mtk_ppe *ppe);
- 
-+void __mtk_ppe_check_skb(struct mtk_ppe *ppe, struct sk_buff *skb, u16 hash);
-+
- static inline void
--mtk_foe_entry_clear(struct mtk_ppe *ppe, u16 hash)
-+mtk_ppe_check_skb(struct mtk_ppe *ppe, struct sk_buff *skb, u16 hash)
- {
--	ppe->foe_table[hash].ib1 = 0;
--	dma_wmb();
-+	u16 now, diff;
-+
-+	if (!ppe)
-+		return;
-+
-+	now = (u16)jiffies;
-+	diff = now - ppe->foe_check_time[hash];
-+	if (diff < HZ / 10)
-+		return;
-+
-+	ppe->foe_check_time[hash] = now;
-+	__mtk_ppe_check_skb(ppe, skb, hash);
- }
- 
- static inline int
-@@ -282,8 +307,9 @@ int mtk_foe_entry_set_vlan(struct mtk_fo
- int mtk_foe_entry_set_pppoe(struct mtk_foe_entry *entry, int sid);
- int mtk_foe_entry_set_wdma(struct mtk_foe_entry *entry, int wdma_idx, int txq,
- 			   int bss, int wcid);
--int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_foe_entry *entry,
--			 u16 timestamp);
-+int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_flow_entry *entry);
-+void mtk_foe_entry_clear(struct mtk_ppe *ppe, struct mtk_flow_entry *entry);
-+int mtk_foe_entry_idle_time(struct mtk_ppe *ppe, struct mtk_flow_entry *entry);
- int mtk_ppe_debugfs_init(struct mtk_ppe *ppe);
- 
- #endif
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -43,13 +43,6 @@ struct mtk_flow_data {
- 	} pppoe;
- };
- 
--struct mtk_flow_entry {
--	struct rhash_head node;
--	unsigned long cookie;
--	u16 hash;
--	s8 wed_index;
--};
--
- static const struct rhashtable_params mtk_flow_ht_params = {
- 	.head_offset = offsetof(struct mtk_flow_entry, node),
- 	.key_offset = offsetof(struct mtk_flow_entry, cookie),
-@@ -57,12 +50,6 @@ static const struct rhashtable_params mt
- 	.automatic_shrinking = true,
- };
- 
--static u32
--mtk_eth_timestamp(struct mtk_eth *eth)
--{
--	return mtk_r32(eth, 0x0010) & MTK_FOE_IB1_BIND_TIMESTAMP;
--}
--
- static int
- mtk_flow_set_ipv4_addr(struct mtk_foe_entry *foe, struct mtk_flow_data *data,
- 		       bool egress)
-@@ -238,10 +225,8 @@ mtk_flow_offload_replace(struct mtk_eth
- 	int offload_type = 0;
- 	int wed_index = -1;
- 	u16 addr_type = 0;
--	u32 timestamp;
- 	u8 l4proto = 0;
- 	int err = 0;
--	int hash;
- 	int i;
- 
- 	if (rhashtable_lookup(&eth->flow_table, &f->cookie, mtk_flow_ht_params))
-@@ -411,23 +396,21 @@ mtk_flow_offload_replace(struct mtk_eth
- 		return -ENOMEM;
- 
- 	entry->cookie = f->cookie;
--	timestamp = mtk_eth_timestamp(eth);
--	hash = mtk_foe_entry_commit(eth->ppe, &foe, timestamp);
--	if (hash < 0) {
--		err = hash;
-+	memcpy(&entry->data, &foe, sizeof(entry->data));
-+	entry->wed_index = wed_index;
-+
-+	if (mtk_foe_entry_commit(eth->ppe, entry) < 0)
- 		goto free;
--	}
- 
--	entry->hash = hash;
--	entry->wed_index = wed_index;
- 	err = rhashtable_insert_fast(&eth->flow_table, &entry->node,
- 				     mtk_flow_ht_params);
- 	if (err < 0)
--		goto clear_flow;
-+		goto clear;
- 
- 	return 0;
--clear_flow:
--	mtk_foe_entry_clear(eth->ppe, hash);
-+
-+clear:
-+	mtk_foe_entry_clear(eth->ppe, entry);
- free:
- 	kfree(entry);
- 	if (wed_index >= 0)
-@@ -445,7 +428,7 @@ mtk_flow_offload_destroy(struct mtk_eth
- 	if (!entry)
- 		return -ENOENT;
- 
--	mtk_foe_entry_clear(eth->ppe, entry->hash);
-+	mtk_foe_entry_clear(eth->ppe, entry);
- 	rhashtable_remove_fast(&eth->flow_table, &entry->node,
- 			       mtk_flow_ht_params);
- 	if (entry->wed_index >= 0)
-@@ -459,7 +442,6 @@ static int
- mtk_flow_offload_stats(struct mtk_eth *eth, struct flow_cls_offload *f)
- {
- 	struct mtk_flow_entry *entry;
--	int timestamp;
- 	u32 idle;
- 
- 	entry = rhashtable_lookup(&eth->flow_table, &f->cookie,
-@@ -467,11 +449,7 @@ mtk_flow_offload_stats(struct mtk_eth *e
- 	if (!entry)
- 		return -ENOENT;
- 
--	timestamp = mtk_foe_entry_timestamp(eth->ppe, entry->hash);
--	if (timestamp < 0)
--		return -ETIMEDOUT;
--
--	idle = mtk_eth_timestamp(eth) - timestamp;
-+	idle = mtk_foe_entry_idle_time(eth->ppe, entry);
- 	f->stats.lastused = jiffies - idle * HZ;
- 
- 	return 0;
diff --git a/target/linux/generic/pending-5.10/701-09-net-ethernet-mtk_eth_soc-remove-bridge-flow-offload-.patch b/target/linux/generic/pending-5.10/701-09-net-ethernet-mtk_eth_soc-remove-bridge-flow-offload-.patch
deleted file mode 100644
index 2ff0b341f915..000000000000
--- a/target/linux/generic/pending-5.10/701-09-net-ethernet-mtk_eth_soc-remove-bridge-flow-offload-.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 21 Feb 2022 15:55:19 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: remove bridge flow offload
- type entry support
-
-According to MediaTek, this feature is not supported in current hardware
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -84,13 +84,6 @@ static u32 mtk_ppe_hash_entry(struct mtk
- 	u32 hash;
- 
- 	switch (FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, e->ib1)) {
--		case MTK_PPE_PKT_TYPE_BRIDGE:
--			hv1 = e->bridge.src_mac_lo;
--			hv1 ^= ((e->bridge.src_mac_hi & 0xffff) << 16);
--			hv2 = e->bridge.src_mac_hi >> 16;
--			hv2 ^= e->bridge.dest_mac_lo;
--			hv3 = e->bridge.dest_mac_hi;
--			break;
- 		case MTK_PPE_PKT_TYPE_IPV4_ROUTE:
- 		case MTK_PPE_PKT_TYPE_IPV4_HNAPT:
- 			hv1 = e->ipv4.orig.ports;
-@@ -572,7 +565,6 @@ int mtk_ppe_start(struct mtk_ppe *ppe)
- 	      MTK_PPE_FLOW_CFG_IP4_NAT |
- 	      MTK_PPE_FLOW_CFG_IP4_NAPT |
- 	      MTK_PPE_FLOW_CFG_IP4_DSLITE |
--	      MTK_PPE_FLOW_CFG_L2_BRIDGE |
- 	      MTK_PPE_FLOW_CFG_IP4_NAT_FRAG;
- 	ppe_w32(ppe, MTK_PPE_FLOW_CFG, val);
- 
---- a/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
-@@ -32,7 +32,6 @@ static const char *mtk_foe_pkt_type_str(
- 	static const char * const type_str[] = {
- 		[MTK_PPE_PKT_TYPE_IPV4_HNAPT] = "IPv4 5T",
- 		[MTK_PPE_PKT_TYPE_IPV4_ROUTE] = "IPv4 3T",
--		[MTK_PPE_PKT_TYPE_BRIDGE] = "L2",
- 		[MTK_PPE_PKT_TYPE_IPV4_DSLITE] = "DS-LITE",
- 		[MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T] = "IPv6 3T",
- 		[MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T] = "IPv6 5T",
diff --git a/target/linux/generic/pending-5.10/701-10-net-ethernet-mtk_eth_soc-support-creating-mac-addres.patch b/target/linux/generic/pending-5.10/701-10-net-ethernet-mtk_eth_soc-support-creating-mac-addres.patch
deleted file mode 100644
index 99e597a3d1d4..000000000000
--- a/target/linux/generic/pending-5.10/701-10-net-ethernet-mtk_eth_soc-support-creating-mac-addres.patch
+++ /dev/null
@@ -1,553 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 23 Feb 2022 10:56:34 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: support creating mac
- address based offload entries
-
-This will be used to implement a limited form of bridge offloading.
-Since the hardware does not support flow table entries with just source
-and destination MAC address, the driver has to emulate it.
-
-The hardware automatically creates entries entries for incoming flows, even
-when they are bridged instead of routed, and reports when packets for these
-flows have reached the minimum PPS rate for offloading.
-
-After this happens, we look up the L2 flow offload entry based on the MAC
-header and fill in the output routing information in the flow table.
-The dynamically created per-flow entries are automatically removed when
-either the hardware flowtable entry expires, is replaced, or if the offload
-rule they belong to is removed
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -6,12 +6,22 @@
- #include <linux/iopoll.h>
- #include <linux/etherdevice.h>
- #include <linux/platform_device.h>
-+#include <linux/if_ether.h>
-+#include <linux/if_vlan.h>
-+#include <net/dsa.h>
- #include "mtk_eth_soc.h"
- #include "mtk_ppe.h"
- #include "mtk_ppe_regs.h"
- 
- static DEFINE_SPINLOCK(ppe_lock);
- 
-+static const struct rhashtable_params mtk_flow_l2_ht_params = {
-+	.head_offset = offsetof(struct mtk_flow_entry, l2_node),
-+	.key_offset = offsetof(struct mtk_flow_entry, data.bridge),
-+	.key_len = offsetof(struct mtk_foe_bridge, key_end),
-+	.automatic_shrinking = true,
-+};
-+
- static void ppe_w32(struct mtk_ppe *ppe, u32 reg, u32 val)
- {
- 	writel(val, ppe->base + reg);
-@@ -123,6 +133,9 @@ mtk_foe_entry_l2(struct mtk_foe_entry *e
- {
- 	int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
- 
-+	if (type == MTK_PPE_PKT_TYPE_BRIDGE)
-+		return &entry->bridge.l2;
-+
- 	if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE)
- 		return &entry->ipv6.l2;
- 
-@@ -134,6 +147,9 @@ mtk_foe_entry_ib2(struct mtk_foe_entry *
- {
- 	int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
- 
-+	if (type == MTK_PPE_PKT_TYPE_BRIDGE)
-+		return &entry->bridge.ib2;
-+
- 	if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE)
- 		return &entry->ipv6.ib2;
- 
-@@ -168,7 +184,12 @@ int mtk_foe_entry_prepare(struct mtk_foe
- 	if (type == MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T)
- 		entry->ipv6.ports = ports_pad;
- 
--	if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE) {
-+	if (type == MTK_PPE_PKT_TYPE_BRIDGE) {
-+		ether_addr_copy(entry->bridge.src_mac, src_mac);
-+		ether_addr_copy(entry->bridge.dest_mac, dest_mac);
-+		entry->bridge.ib2 = val;
-+		l2 = &entry->bridge.l2;
-+	} else if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE) {
- 		entry->ipv6.ib2 = val;
- 		l2 = &entry->ipv6.l2;
- 	} else {
-@@ -372,12 +393,96 @@ mtk_flow_entry_match(struct mtk_flow_ent
- }
- 
- static void
-+__mtk_foe_entry_clear(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
-+{
-+	struct hlist_head *head;
-+	struct hlist_node *tmp;
-+
-+	if (entry->type == MTK_FLOW_TYPE_L2) {
-+		rhashtable_remove_fast(&ppe->l2_flows, &entry->l2_node,
-+				       mtk_flow_l2_ht_params);
-+
-+		head = &entry->l2_flows;
-+		hlist_for_each_entry_safe(entry, tmp, head, l2_data.list)
-+			__mtk_foe_entry_clear(ppe, entry);
-+		return;
-+	}
-+
-+	hlist_del_init(&entry->list);
-+	if (entry->hash != 0xffff) {
-+		ppe->foe_table[entry->hash].ib1 &= ~MTK_FOE_IB1_STATE;
-+		ppe->foe_table[entry->hash].ib1 |= FIELD_PREP(MTK_FOE_IB1_STATE,
-+							      MTK_FOE_STATE_BIND);
-+		dma_wmb();
-+	}
-+	entry->hash = 0xffff;
-+
-+	if (entry->type != MTK_FLOW_TYPE_L2_SUBFLOW)
-+		return;
-+
-+	hlist_del_init(&entry->l2_data.list);
-+	kfree(entry);
-+}
-+
-+static int __mtk_foe_entry_idle_time(struct mtk_ppe *ppe, u32 ib1)
-+{
-+	u16 timestamp;
-+	u16 now;
-+
-+	now = mtk_eth_timestamp(ppe->eth) & MTK_FOE_IB1_BIND_TIMESTAMP;
-+	timestamp = ib1 & MTK_FOE_IB1_BIND_TIMESTAMP;
-+
-+	if (timestamp > now)
-+		return MTK_FOE_IB1_BIND_TIMESTAMP + 1 - timestamp + now;
-+	else
-+		return now - timestamp;
-+}
-+
-+static void
-+mtk_flow_entry_update_l2(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
-+{
-+	struct mtk_flow_entry *cur;
-+	struct mtk_foe_entry *hwe;
-+	struct hlist_node *tmp;
-+	int idle;
-+
-+	idle = __mtk_foe_entry_idle_time(ppe, entry->data.ib1);
-+	hlist_for_each_entry_safe(cur, tmp, &entry->l2_flows, l2_data.list) {
-+		int cur_idle;
-+		u32 ib1;
-+
-+		hwe = &ppe->foe_table[cur->hash];
-+		ib1 = READ_ONCE(hwe->ib1);
-+
-+		if (FIELD_GET(MTK_FOE_IB1_STATE, ib1) != MTK_FOE_STATE_BIND) {
-+			cur->hash = 0xffff;
-+			__mtk_foe_entry_clear(ppe, cur);
-+			continue;
-+		}
-+
-+		cur_idle = __mtk_foe_entry_idle_time(ppe, ib1);
-+		if (cur_idle >= idle)
-+			continue;
-+
-+		idle = cur_idle;
-+		entry->data.ib1 &= ~MTK_FOE_IB1_BIND_TIMESTAMP;
-+		entry->data.ib1 |= hwe->ib1 & MTK_FOE_IB1_BIND_TIMESTAMP;
-+	}
-+}
-+
-+static void
- mtk_flow_entry_update(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
- {
- 	struct mtk_foe_entry *hwe;
- 	struct mtk_foe_entry foe;
- 
- 	spin_lock_bh(&ppe_lock);
-+
-+	if (entry->type == MTK_FLOW_TYPE_L2) {
-+		mtk_flow_entry_update_l2(ppe, entry);
-+		goto out;
-+	}
-+
- 	if (entry->hash == 0xffff)
- 		goto out;
- 
-@@ -419,21 +524,28 @@ __mtk_foe_entry_commit(struct mtk_ppe *p
- void mtk_foe_entry_clear(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
- {
- 	spin_lock_bh(&ppe_lock);
--	hlist_del_init(&entry->list);
--	if (entry->hash != 0xffff) {
--		ppe->foe_table[entry->hash].ib1 &= ~MTK_FOE_IB1_STATE;
--		ppe->foe_table[entry->hash].ib1 |= FIELD_PREP(MTK_FOE_IB1_STATE,
--							      MTK_FOE_STATE_BIND);
--		dma_wmb();
--	}
--	entry->hash = 0xffff;
-+	__mtk_foe_entry_clear(ppe, entry);
- 	spin_unlock_bh(&ppe_lock);
- }
- 
-+static int
-+mtk_foe_entry_commit_l2(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
-+{
-+	entry->type = MTK_FLOW_TYPE_L2;
-+
-+	return rhashtable_insert_fast(&ppe->l2_flows, &entry->l2_node,
-+				      mtk_flow_l2_ht_params);
-+}
-+
- int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
- {
--	u32 hash = mtk_ppe_hash_entry(&entry->data);
-+	int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->data.ib1);
-+	u32 hash;
-+
-+	if (type == MTK_PPE_PKT_TYPE_BRIDGE)
-+		return mtk_foe_entry_commit_l2(ppe, entry);
- 
-+	hash = mtk_ppe_hash_entry(&entry->data);
- 	entry->hash = 0xffff;
- 	spin_lock_bh(&ppe_lock);
- 	hlist_add_head(&entry->list, &ppe->foe_flow[hash / 2]);
-@@ -442,18 +554,72 @@ int mtk_foe_entry_commit(struct mtk_ppe
- 	return 0;
- }
- 
-+static void
-+mtk_foe_entry_commit_subflow(struct mtk_ppe *ppe, struct mtk_flow_entry *entry,
-+			     u16 hash)
-+{
-+	struct mtk_flow_entry *flow_info;
-+	struct mtk_foe_entry foe, *hwe;
-+	struct mtk_foe_mac_info *l2;
-+	u32 ib1_mask = MTK_FOE_IB1_PACKET_TYPE | MTK_FOE_IB1_UDP;
-+	int type;
-+
-+	flow_info = kzalloc(offsetof(struct mtk_flow_entry, l2_data.end),
-+			    GFP_ATOMIC);
-+	if (!flow_info)
-+		return;
-+
-+	flow_info->l2_data.base_flow = entry;
-+	flow_info->type = MTK_FLOW_TYPE_L2_SUBFLOW;
-+	flow_info->hash = hash;
-+	hlist_add_head(&flow_info->list, &ppe->foe_flow[hash / 2]);
-+	hlist_add_head(&flow_info->l2_data.list, &entry->l2_flows);
-+
-+	hwe = &ppe->foe_table[hash];
-+	memcpy(&foe, hwe, sizeof(foe));
-+	foe.ib1 &= ib1_mask;
-+	foe.ib1 |= entry->data.ib1 & ~ib1_mask;
-+
-+	l2 = mtk_foe_entry_l2(&foe);
-+	memcpy(l2, &entry->data.bridge.l2, sizeof(*l2));
-+
-+	type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, foe.ib1);
-+	if (type == MTK_PPE_PKT_TYPE_IPV4_HNAPT)
-+		memcpy(&foe.ipv4.new, &foe.ipv4.orig, sizeof(foe.ipv4.new));
-+	else if (type >= MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T && l2->etype == ETH_P_IP)
-+		l2->etype = ETH_P_IPV6;
-+
-+	*mtk_foe_entry_ib2(&foe) = entry->data.bridge.ib2;
-+
-+	__mtk_foe_entry_commit(ppe, &foe, hash);
-+}
-+
- void __mtk_ppe_check_skb(struct mtk_ppe *ppe, struct sk_buff *skb, u16 hash)
- {
- 	struct hlist_head *head = &ppe->foe_flow[hash / 2];
--	struct mtk_flow_entry *entry;
- 	struct mtk_foe_entry *hwe = &ppe->foe_table[hash];
-+	struct mtk_flow_entry *entry;
-+	struct mtk_foe_bridge key = {};
-+	struct ethhdr *eh;
- 	bool found = false;
--
--	if (hlist_empty(head))
--		return;
-+	u8 *tag;
- 
- 	spin_lock_bh(&ppe_lock);
-+
-+	if (FIELD_GET(MTK_FOE_IB1_STATE, hwe->ib1) == MTK_FOE_STATE_BIND)
-+		goto out;
-+
- 	hlist_for_each_entry(entry, head, list) {
-+		if (entry->type == MTK_FLOW_TYPE_L2_SUBFLOW) {
-+			if (unlikely(FIELD_GET(MTK_FOE_IB1_STATE, hwe->ib1) ==
-+				     MTK_FOE_STATE_BIND))
-+				continue;
-+
-+			entry->hash = 0xffff;
-+			__mtk_foe_entry_clear(ppe, entry);
-+			continue;
-+		}
-+
- 		if (found || !mtk_flow_entry_match(entry, hwe)) {
- 			if (entry->hash != 0xffff)
- 				entry->hash = 0xffff;
-@@ -464,21 +630,50 @@ void __mtk_ppe_check_skb(struct mtk_ppe
- 		__mtk_foe_entry_commit(ppe, &entry->data, hash);
- 		found = true;
- 	}
-+
-+	if (found)
-+		goto out;
-+
-+	eh = eth_hdr(skb);
-+	ether_addr_copy(key.dest_mac, eh->h_dest);
-+	ether_addr_copy(key.src_mac, eh->h_source);
-+	tag = skb->data - 2;
-+	key.vlan = 0;
-+	switch (skb->protocol) {
-+#if IS_ENABLED(CONFIG_NET_DSA)
-+	case htons(ETH_P_XDSA):
-+		if (!netdev_uses_dsa(skb->dev) ||
-+		    skb->dev->dsa_ptr->tag_ops->proto != DSA_TAG_PROTO_MTK)
-+			goto out;
-+
-+		tag += 4;
-+		if (get_unaligned_be16(tag) != ETH_P_8021Q)
-+			break;
-+
-+		fallthrough;
-+#endif
-+	case htons(ETH_P_8021Q):
-+		key.vlan = get_unaligned_be16(tag + 2) & VLAN_VID_MASK;
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	entry = rhashtable_lookup_fast(&ppe->l2_flows, &key, mtk_flow_l2_ht_params);
-+	if (!entry)
-+		goto out;
-+
-+	mtk_foe_entry_commit_subflow(ppe, entry, hash);
-+
-+out:
- 	spin_unlock_bh(&ppe_lock);
- }
- 
- int mtk_foe_entry_idle_time(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
- {
--	u16 now = mtk_eth_timestamp(ppe->eth) & MTK_FOE_IB1_BIND_TIMESTAMP;
--	u16 timestamp;
--
- 	mtk_flow_entry_update(ppe, entry);
--	timestamp = entry->data.ib1 & MTK_FOE_IB1_BIND_TIMESTAMP;
- 
--	if (timestamp > now)
--		return MTK_FOE_IB1_BIND_TIMESTAMP + 1 - timestamp + now;
--	else
--		return now - timestamp;
-+	return __mtk_foe_entry_idle_time(ppe, entry->data.ib1);
- }
- 
- struct mtk_ppe *mtk_ppe_init(struct mtk_eth *eth, void __iomem *base,
-@@ -492,6 +687,8 @@ struct mtk_ppe *mtk_ppe_init(struct mtk_
- 	if (!ppe)
- 		return NULL;
- 
-+	rhashtable_init(&ppe->l2_flows, &mtk_flow_l2_ht_params);
-+
- 	/* need to allocate a separate device, since it PPE DMA access is
- 	 * not coherent.
- 	 */
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -6,6 +6,7 @@
- 
- #include <linux/kernel.h>
- #include <linux/bitfield.h>
-+#include <linux/rhashtable.h>
- 
- #define MTK_ETH_PPE_BASE		0xc00
- 
-@@ -84,19 +85,16 @@ struct mtk_foe_mac_info {
- 	u16 src_mac_lo;
- };
- 
-+/* software-only entry type */
- struct mtk_foe_bridge {
--	u32 dest_mac_hi;
--
--	u16 src_mac_lo;
--	u16 dest_mac_lo;
-+	u8 dest_mac[ETH_ALEN];
-+	u8 src_mac[ETH_ALEN];
-+	u16 vlan;
- 
--	u32 src_mac_hi;
-+	struct {} key_end;
- 
- 	u32 ib2;
- 
--	u32 _rsv[5];
--
--	u32 udf_tsid;
- 	struct mtk_foe_mac_info l2;
- };
- 
-@@ -235,13 +233,33 @@ enum {
- 	MTK_PPE_CPU_REASON_INVALID			= 0x1f,
- };
- 
-+enum {
-+	MTK_FLOW_TYPE_L4,
-+	MTK_FLOW_TYPE_L2,
-+	MTK_FLOW_TYPE_L2_SUBFLOW,
-+};
-+
- struct mtk_flow_entry {
-+	union {
-+		struct hlist_node list;
-+		struct {
-+			struct rhash_head l2_node;
-+			struct hlist_head l2_flows;
-+		};
-+	};
-+	u8 type;
-+	s8 wed_index;
-+	u16 hash;
-+	union {
-+		struct mtk_foe_entry data;
-+		struct {
-+			struct mtk_flow_entry *base_flow;
-+			struct hlist_node list;
-+			struct {} end;
-+		} l2_data;
-+	};
- 	struct rhash_head node;
--	struct hlist_node list;
- 	unsigned long cookie;
--	struct mtk_foe_entry data;
--	u16 hash;
--	s8 wed_index;
- };
- 
- struct mtk_ppe {
-@@ -256,6 +274,8 @@ struct mtk_ppe {
- 	u16 foe_check_time[MTK_PPE_ENTRIES];
- 	struct hlist_head foe_flow[MTK_PPE_ENTRIES / 2];
- 
-+	struct rhashtable l2_flows;
-+
- 	void *acct_table;
- };
- 
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -32,6 +32,8 @@ struct mtk_flow_data {
- 	__be16 src_port;
- 	__be16 dst_port;
- 
-+	u16 vlan_in;
-+
- 	struct {
- 		u16 id;
- 		__be16 proto;
-@@ -258,9 +260,45 @@ mtk_flow_offload_replace(struct mtk_eth
- 		return -EOPNOTSUPP;
- 	}
- 
-+	switch (addr_type) {
-+	case 0:
-+		offload_type = MTK_PPE_PKT_TYPE_BRIDGE;
-+		if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
-+			struct flow_match_eth_addrs match;
-+
-+			flow_rule_match_eth_addrs(rule, &match);
-+			memcpy(data.eth.h_dest, match.key->dst, ETH_ALEN);
-+			memcpy(data.eth.h_source, match.key->src, ETH_ALEN);
-+		} else {
-+			return -EOPNOTSUPP;
-+		}
-+
-+		if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_VLAN)) {
-+			struct flow_match_vlan match;
-+
-+			flow_rule_match_vlan(rule, &match);
-+
-+			if (match.key->vlan_tpid != cpu_to_be16(ETH_P_8021Q))
-+				return -EOPNOTSUPP;
-+
-+			data.vlan_in = match.key->vlan_id;
-+		}
-+		break;
-+	case FLOW_DISSECTOR_KEY_IPV4_ADDRS:
-+		offload_type = MTK_PPE_PKT_TYPE_IPV4_HNAPT;
-+		break;
-+	case FLOW_DISSECTOR_KEY_IPV6_ADDRS:
-+		offload_type = MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T;
-+		break;
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+
- 	flow_action_for_each(i, act, &rule->action) {
- 		switch (act->id) {
- 		case FLOW_ACTION_MANGLE:
-+			if (offload_type == MTK_PPE_PKT_TYPE_BRIDGE)
-+				return -EOPNOTSUPP;
- 			if (act->mangle.htype == FLOW_ACT_MANGLE_HDR_TYPE_ETH)
- 				mtk_flow_offload_mangle_eth(act, &data.eth);
- 			break;
-@@ -292,17 +330,6 @@ mtk_flow_offload_replace(struct mtk_eth
- 		}
- 	}
- 
--	switch (addr_type) {
--	case FLOW_DISSECTOR_KEY_IPV4_ADDRS:
--		offload_type = MTK_PPE_PKT_TYPE_IPV4_HNAPT;
--		break;
--	case FLOW_DISSECTOR_KEY_IPV6_ADDRS:
--		offload_type = MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T;
--		break;
--	default:
--		return -EOPNOTSUPP;
--	}
--
- 	if (!is_valid_ether_addr(data.eth.h_source) ||
- 	    !is_valid_ether_addr(data.eth.h_dest))
- 		return -EINVAL;
-@@ -316,10 +343,13 @@ mtk_flow_offload_replace(struct mtk_eth
- 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_PORTS)) {
- 		struct flow_match_ports ports;
- 
-+		if (offload_type == MTK_PPE_PKT_TYPE_BRIDGE)
-+			return -EOPNOTSUPP;
-+
- 		flow_rule_match_ports(rule, &ports);
- 		data.src_port = ports.key->src;
- 		data.dst_port = ports.key->dst;
--	} else {
-+	} else if (offload_type != MTK_PPE_PKT_TYPE_BRIDGE) {
- 		return -EOPNOTSUPP;
- 	}
- 
-@@ -349,6 +379,9 @@ mtk_flow_offload_replace(struct mtk_eth
- 		if (act->id != FLOW_ACTION_MANGLE)
- 			continue;
- 
-+		if (offload_type == MTK_PPE_PKT_TYPE_BRIDGE)
-+			return -EOPNOTSUPP;
-+
- 		switch (act->mangle.htype) {
- 		case FLOW_ACT_MANGLE_HDR_TYPE_TCP:
- 		case FLOW_ACT_MANGLE_HDR_TYPE_UDP:
-@@ -374,6 +407,9 @@ mtk_flow_offload_replace(struct mtk_eth
- 			return err;
- 	}
- 
-+	if (offload_type == MTK_PPE_PKT_TYPE_BRIDGE)
-+		foe.bridge.vlan = data.vlan_in;
-+
- 	if (data.vlan.num == 1) {
- 		if (data.vlan.proto != htons(ETH_P_8021Q))
- 			return -EOPNOTSUPP;
diff --git a/target/linux/generic/pending-5.10/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch b/target/linux/generic/pending-5.10/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch
deleted file mode 100644
index a71cd9287498..000000000000
--- a/target/linux/generic/pending-5.10/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 21 Mar 2022 20:39:59 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: enable threaded NAPI
-
-This can improve performance under load by ensuring that NAPI processing is
-not pinned on CPU 0.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2200,8 +2200,8 @@ static irqreturn_t mtk_handle_irq_rx(int
- 
- 	eth->rx_events++;
- 	if (likely(napi_schedule_prep(&eth->rx_napi))) {
--		__napi_schedule(&eth->rx_napi);
- 		mtk_rx_irq_disable(eth, MTK_RX_DONE_INT);
-+		__napi_schedule(&eth->rx_napi);
- 	}
- 
- 	return IRQ_HANDLED;
-@@ -2213,8 +2213,8 @@ static irqreturn_t mtk_handle_irq_tx(int
- 
- 	eth->tx_events++;
- 	if (likely(napi_schedule_prep(&eth->tx_napi))) {
--		__napi_schedule(&eth->tx_napi);
- 		mtk_tx_irq_disable(eth, MTK_TX_DONE_INT);
-+		__napi_schedule(&eth->tx_napi);
- 	}
- 
- 	return IRQ_HANDLED;
-@@ -3325,6 +3325,8 @@ static int mtk_probe(struct platform_dev
- 	 * for NAPI to work
- 	 */
- 	init_dummy_netdev(&eth->dummy_dev);
-+	eth->dummy_dev.threaded = 1;
-+	strcpy(eth->dummy_dev.name, "mtk_eth");
- 	netif_napi_add(&eth->dummy_dev, &eth->tx_napi, mtk_napi_tx,
- 		       MTK_NAPI_WEIGHT);
- 	netif_napi_add(&eth->dummy_dev, &eth->rx_napi, mtk_napi_rx,
diff --git a/target/linux/generic/pending-5.10/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-5.10/703-phy-add-detach-callback-to-struct-phy_driver.patch
deleted file mode 100644
index 068ed323a95b..000000000000
--- a/target/linux/generic/pending-5.10/703-phy-add-detach-callback-to-struct-phy_driver.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: generic: add detach callback to struct phy_driver
-
-lede-commit: fe61fc2d7d0b3fb348b502f68f98243b3ddf5867
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/phy/phy_device.c | 3 +++
- include/linux/phy.h          | 6 ++++++
- 2 files changed, 9 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1652,6 +1652,9 @@ void phy_detach(struct phy_device *phyde
- 	struct module *ndev_owner = NULL;
- 	struct mii_bus *bus;
- 
-+	if (phydev->drv && phydev->drv->detach)
-+		phydev->drv->detach(phydev);
-+
- 	if (phydev->sysfs_links) {
- 		if (dev)
- 			sysfs_remove_link(&dev->dev.kobj, "phydev");
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -765,6 +765,12 @@ struct phy_driver {
- 	/** @handle_interrupt: Override default interrupt handling */
- 	irqreturn_t (*handle_interrupt)(struct phy_device *phydev);
- 
-+	/*
-+	 * Called before an ethernet device is detached
-+	 * from the PHY.
-+	 */
-+	void (*detach)(struct phy_device *phydev);
-+
- 	/** @remove: Clears up any memory if needed */
- 	void (*remove)(struct phy_device *phydev);
- 
diff --git a/target/linux/generic/pending-5.10/704-00-netfilter-flowtable-fix-excessive-hw-offload-attempt.patch b/target/linux/generic/pending-5.10/704-00-netfilter-flowtable-fix-excessive-hw-offload-attempt.patch
deleted file mode 100644
index 67a72f825a5d..000000000000
--- a/target/linux/generic/pending-5.10/704-00-netfilter-flowtable-fix-excessive-hw-offload-attempt.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 6 May 2022 12:37:23 +0200
-Subject: [PATCH] netfilter: flowtable: fix excessive hw offload attempts
- after failure
-
-If a flow cannot be offloaded, the code currently repeatedly tries again as
-quickly as possible, which can significantly increase system load.
-Fix this by limiting flow timeout update and hardware offload retry to once
-per second.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -318,8 +318,10 @@ void flow_offload_refresh(struct nf_flow
- 	u32 timeout;
- 
- 	timeout = nf_flowtable_time_stamp + flow_offload_get_timeout(flow);
--	if (READ_ONCE(flow->timeout) != timeout)
-+	if (timeout - READ_ONCE(flow->timeout) > HZ)
- 		WRITE_ONCE(flow->timeout, timeout);
-+	else
-+		return;
- 
- 	if (likely(!nf_flowtable_hw_offload(flow_table)))
- 		return;
diff --git a/target/linux/generic/pending-5.10/704-01-netfilter-nft_flow_offload-skip-dst-neigh-lookup-for.patch b/target/linux/generic/pending-5.10/704-01-netfilter-nft_flow_offload-skip-dst-neigh-lookup-for.patch
deleted file mode 100644
index 6683a53f765e..000000000000
--- a/target/linux/generic/pending-5.10/704-01-netfilter-nft_flow_offload-skip-dst-neigh-lookup-for.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 6 May 2022 12:43:58 +0200
-Subject: [PATCH] netfilter: nft_flow_offload: skip dst neigh lookup for
- ppp devices
-
-The dst entry does not contain a valid hardware address, so skip the lookup
-in order to avoid running into errors here.
-The proper hardware address is filled in from nft_dev_path_info
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -36,6 +36,15 @@ static void nft_default_forward_path(str
- 	route->tuple[dir].xmit_type	= nft_xmit_type(dst_cache);
- }
- 
-+static bool nft_is_valid_ether_device(const struct net_device *dev)
-+{
-+	if (!dev || (dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
-+	    dev->addr_len != ETH_ALEN || !is_valid_ether_addr(dev->dev_addr))
-+		return false;
-+
-+	return true;
-+}
-+
- static int nft_dev_fill_forward_path(const struct nf_flow_route *route,
- 				     const struct dst_entry *dst_cache,
- 				     const struct nf_conn *ct,
-@@ -47,6 +56,9 @@ static int nft_dev_fill_forward_path(con
- 	struct neighbour *n;
- 	u8 nud_state;
- 
-+	if (!nft_is_valid_ether_device(dev))
-+		goto out;
-+
- 	n = dst_neigh_lookup(dst_cache, daddr);
- 	if (!n)
- 		return -1;
-@@ -60,6 +72,7 @@ static int nft_dev_fill_forward_path(con
- 	if (!(nud_state & NUD_VALID))
- 		return -1;
- 
-+out:
- 	return dev_fill_forward_path(dev, ha, stack);
- }
- 
-@@ -78,15 +91,6 @@ struct nft_forward_info {
- 	enum flow_offload_xmit_type xmit_type;
- };
- 
--static bool nft_is_valid_ether_device(const struct net_device *dev)
--{
--	if (!dev || (dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
--	    dev->addr_len != ETH_ALEN || !is_valid_ether_addr(dev->dev_addr))
--		return false;
--
--	return true;
--}
--
- static void nft_dev_path_info(const struct net_device_path_stack *stack,
- 			      struct nft_forward_info *info,
- 			      unsigned char *ha, struct nf_flowtable *flowtable)
diff --git a/target/linux/generic/pending-5.10/704-02-net-fix-dev_fill_forward_path-with-pppoe-bridge.patch b/target/linux/generic/pending-5.10/704-02-net-fix-dev_fill_forward_path-with-pppoe-bridge.patch
deleted file mode 100644
index c0660e50c4ec..000000000000
--- a/target/linux/generic/pending-5.10/704-02-net-fix-dev_fill_forward_path-with-pppoe-bridge.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 6 May 2022 13:54:44 +0200
-Subject: [PATCH] net: fix dev_fill_forward_path with pppoe + bridge
-
-When calling dev_fill_forward_path on a pppoe device, the provided destination
-address is invalid. In order for the bridge fdb lookup to succeed, the pppoe
-code needs to update ctx->daddr to the correct value.
-Fix this by storing the address inside struct net_device_path_ctx
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -91,7 +91,6 @@ mtk_flow_get_wdma_info(struct net_device
- {
- 	struct net_device_path_ctx ctx = {
- 		.dev = dev,
--		.daddr = addr,
- 	};
- 	struct net_device_path path = {};
- 
-@@ -101,6 +100,7 @@ mtk_flow_get_wdma_info(struct net_device
- 	if (!dev->netdev_ops->ndo_fill_forward_path)
- 		return -1;
- 
-+	memcpy(ctx.daddr, addr, sizeof(ctx.daddr));
- 	if (dev->netdev_ops->ndo_fill_forward_path(&ctx, &path))
- 		return -1;
- 
---- a/drivers/net/ppp/pppoe.c
-+++ b/drivers/net/ppp/pppoe.c
-@@ -988,6 +988,7 @@ static int pppoe_fill_forward_path(struc
- 	path->encap.proto = htons(ETH_P_PPP_SES);
- 	path->encap.id = be16_to_cpu(po->num);
- 	memcpy(path->encap.h_dest, po->pppoe_pa.remote, ETH_ALEN);
-+	memcpy(ctx->daddr, po->pppoe_pa.remote, ETH_ALEN);
- 	path->dev = ctx->dev;
- 	ctx->dev = dev;
- 
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -901,7 +901,7 @@ struct net_device_path_stack {
- 
- struct net_device_path_ctx {
- 	const struct net_device *dev;
--	const u8		*daddr;
-+	u8			daddr[ETH_ALEN];
- 
- 	int			num_vlans;
- 	struct {
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -863,11 +863,11 @@ int dev_fill_forward_path(const struct n
- 	const struct net_device *last_dev;
- 	struct net_device_path_ctx ctx = {
- 		.dev	= dev,
--		.daddr	= daddr,
- 	};
- 	struct net_device_path *path;
- 	int ret = 0;
- 
-+	memcpy(ctx.daddr, daddr, sizeof(ctx.daddr));
- 	stack->num_paths = 0;
- 	while (ctx.dev && ctx.dev->netdev_ops->ndo_fill_forward_path) {
- 		last_dev = ctx.dev;
diff --git a/target/linux/generic/pending-5.10/704-03-netfilter-nft_flow_offload-fix-offload-with-pppoe-vl.patch b/target/linux/generic/pending-5.10/704-03-netfilter-nft_flow_offload-fix-offload-with-pppoe-vl.patch
deleted file mode 100644
index 1e0dc9957d9a..000000000000
--- a/target/linux/generic/pending-5.10/704-03-netfilter-nft_flow_offload-fix-offload-with-pppoe-vl.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 6 May 2022 15:15:06 +0200
-Subject: [PATCH] netfilter: nft_flow_offload: fix offload with pppoe +
- vlan
-
-When running a combination of PPPoE on top of a VLAN, we need to set
-info->outdev to the PPPoE device, otherwise PPPoE encap is skipped
-during software offload.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -123,7 +123,8 @@ static void nft_dev_path_info(const stru
- 				info->indev = NULL;
- 				break;
- 			}
--			info->outdev = path->dev;
-+			if (!info->outdev)
-+				info->outdev = path->dev;
- 			info->encap[info->num_encaps].id = path->encap.id;
- 			info->encap[info->num_encaps].proto = path->encap.proto;
- 			info->num_encaps++;
diff --git a/target/linux/generic/pending-5.10/705-net-dsa-tag_mtk-add-padding-for-tx-packets.patch b/target/linux/generic/pending-5.10/705-net-dsa-tag_mtk-add-padding-for-tx-packets.patch
deleted file mode 100644
index 4f3af6c6b0ec..000000000000
--- a/target/linux/generic/pending-5.10/705-net-dsa-tag_mtk-add-padding-for-tx-packets.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 6 May 2022 21:38:42 +0200
-Subject: [PATCH] net: dsa: tag_mtk: add padding for tx packets
-
-Padding for transmitted packets needs to account for the special tag.
-With not enough padding, garbage bytes are inserted by the switch at the
-end of small packets.
-
-Fixes: 5cd8985a1909 ("net-next: dsa: add Mediatek tag RX/TX handler")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/dsa/tag_mtk.c
-+++ b/net/dsa/tag_mtk.c
-@@ -25,6 +25,13 @@ static struct sk_buff *mtk_tag_xmit(stru
- 	u8 xmit_tpid;
- 	u8 *mtk_tag;
- 
-+	/* The Ethernet switch we are interfaced with needs packets to be at
-+	 * least 64 bytes (including FCS) otherwise their padding might be
-+	 * corrupted. With tags enabled, we need to make sure that packets are
-+	 * at least 68 bytes (including FCS and tag).
-+	 */
-+	eth_skb_pad(skb);
-+
- 	/* Build the special tag after the MAC Source Address. If VLAN header
- 	 * is present, it's required that VLAN header and special tag is
- 	 * being combined. Only in this way we can allow the switch can parse
diff --git a/target/linux/generic/pending-5.10/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch b/target/linux/generic/pending-5.10/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch
deleted file mode 100644
index eb0478e0c613..000000000000
--- a/target/linux/generic/pending-5.10/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch
+++ /dev/null
@@ -1,177 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 27 Aug 2021 12:22:32 +0200
-Subject: [PATCH] bridge: add knob for filtering rx/tx BPDU packets on a port
-
-Some devices (e.g. wireless APs) can't have devices behind them be part of
-a bridge topology with redundant links, due to address limitations.
-Additionally, broadcast traffic on these devices is somewhat expensive, due to
-the low data rate and wakeups of clients in powersave mode.
-This knob can be used to ensure that BPDU packets are never sent or forwarded
-to/from these devices
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/linux/if_bridge.h
-+++ b/include/linux/if_bridge.h
-@@ -56,6 +56,7 @@ struct br_ip_list {
- #define BR_MRP_AWARE		BIT(17)
- #define BR_MRP_LOST_CONT	BIT(18)
- #define BR_MRP_LOST_IN_CONT	BIT(19)
-+#define BR_BPDU_FILTER		BIT(20)
- 
- #define BR_DEFAULT_AGEING_TIME	(300 * HZ)
- 
---- a/net/bridge/br_forward.c
-+++ b/net/bridge/br_forward.c
-@@ -191,6 +191,7 @@ out:
- void br_flood(struct net_bridge *br, struct sk_buff *skb,
- 	      enum br_pkt_type pkt_type, bool local_rcv, bool local_orig)
- {
-+	const unsigned char *dest = eth_hdr(skb)->h_dest;
- 	struct net_bridge_port *prev = NULL;
- 	struct net_bridge_port *p;
- 
-@@ -206,6 +207,10 @@ void br_flood(struct net_bridge *br, str
- 		case BR_PKT_MULTICAST:
- 			if (!(p->flags & BR_MCAST_FLOOD) && skb->dev != br->dev)
- 				continue;
-+			if ((p->flags & BR_BPDU_FILTER) &&
-+			    unlikely(is_link_local_ether_addr(dest) &&
-+				     dest[5] == 0))
-+				continue;
- 			break;
- 		case BR_PKT_BROADCAST:
- 			if (!(p->flags & BR_BCAST_FLOOD) && skb->dev != br->dev)
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -312,6 +312,8 @@ static rx_handler_result_t br_handle_fra
- 		fwd_mask |= p->group_fwd_mask;
- 		switch (dest[5]) {
- 		case 0x00:	/* Bridge Group Address */
-+			if (p->flags & BR_BPDU_FILTER)
-+				goto drop;
- 			/* If STP is turned off,
- 			   then must forward to keep loop detection */
- 			if (p->br->stp_enabled == BR_NO_STP ||
---- a/net/bridge/br_sysfs_if.c
-+++ b/net/bridge/br_sysfs_if.c
-@@ -233,6 +233,7 @@ BRPORT_ATTR_FLAG(multicast_flood, BR_MCA
- BRPORT_ATTR_FLAG(broadcast_flood, BR_BCAST_FLOOD);
- BRPORT_ATTR_FLAG(neigh_suppress, BR_NEIGH_SUPPRESS);
- BRPORT_ATTR_FLAG(isolated, BR_ISOLATED);
-+BRPORT_ATTR_FLAG(bpdu_filter, BR_BPDU_FILTER);
- 
- #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
- static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf)
-@@ -285,6 +286,7 @@ static const struct brport_attribute *br
- 	&brport_attr_group_fwd_mask,
- 	&brport_attr_neigh_suppress,
- 	&brport_attr_isolated,
-+	&brport_attr_bpdu_filter,
- 	&brport_attr_backup_port,
- 	NULL
- };
---- a/net/bridge/br_stp_bpdu.c
-+++ b/net/bridge/br_stp_bpdu.c
-@@ -80,7 +80,8 @@ void br_send_config_bpdu(struct net_brid
- {
- 	unsigned char buf[35];
- 
--	if (p->br->stp_enabled != BR_KERNEL_STP)
-+	if (p->br->stp_enabled != BR_KERNEL_STP ||
-+	    (p->flags & BR_BPDU_FILTER))
- 		return;
- 
- 	buf[0] = 0;
-@@ -127,7 +128,8 @@ void br_send_tcn_bpdu(struct net_bridge_
- {
- 	unsigned char buf[4];
- 
--	if (p->br->stp_enabled != BR_KERNEL_STP)
-+	if (p->br->stp_enabled != BR_KERNEL_STP ||
-+	    (p->flags & BR_BPDU_FILTER))
- 		return;
- 
- 	buf[0] = 0;
-@@ -172,6 +174,9 @@ void br_stp_rcv(const struct stp_proto *
- 	if (!(br->dev->flags & IFF_UP))
- 		goto out;
- 
-+	if (p->flags & BR_BPDU_FILTER)
-+		goto out;
-+
- 	if (p->state == BR_STATE_DISABLED)
- 		goto out;
- 
---- a/include/uapi/linux/if_link.h
-+++ b/include/uapi/linux/if_link.h
-@@ -524,6 +524,7 @@ enum {
- 	IFLA_BRPORT_BACKUP_PORT,
- 	IFLA_BRPORT_MRP_RING_OPEN,
- 	IFLA_BRPORT_MRP_IN_OPEN,
-+	IFLA_BRPORT_BPDU_FILTER,
- 	__IFLA_BRPORT_MAX
- };
- #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
---- a/net/bridge/br_netlink.c
-+++ b/net/bridge/br_netlink.c
-@@ -137,6 +137,7 @@ static inline size_t br_port_info_size(v
- 		+ nla_total_size(1)	/* IFLA_BRPORT_VLAN_TUNNEL */
- 		+ nla_total_size(1)	/* IFLA_BRPORT_NEIGH_SUPPRESS */
- 		+ nla_total_size(1)	/* IFLA_BRPORT_ISOLATED */
-+		+ nla_total_size(1)	/* IFLA_BRPORT_BPDU_FILTER */
- 		+ nla_total_size(sizeof(struct ifla_bridge_id))	/* IFLA_BRPORT_ROOT_ID */
- 		+ nla_total_size(sizeof(struct ifla_bridge_id))	/* IFLA_BRPORT_BRIDGE_ID */
- 		+ nla_total_size(sizeof(u16))	/* IFLA_BRPORT_DESIGNATED_PORT */
-@@ -220,7 +221,8 @@ static int br_port_fill_attrs(struct sk_
- 							  BR_MRP_LOST_CONT)) ||
- 	    nla_put_u8(skb, IFLA_BRPORT_MRP_IN_OPEN,
- 		       !!(p->flags & BR_MRP_LOST_IN_CONT)) ||
--	    nla_put_u8(skb, IFLA_BRPORT_ISOLATED, !!(p->flags & BR_ISOLATED)))
-+	    nla_put_u8(skb, IFLA_BRPORT_ISOLATED, !!(p->flags & BR_ISOLATED)) ||
-+	    nla_put_u8(skb, IFLA_BRPORT_BPDU_FILTER, !!(p->flags & BR_BPDU_FILTER)))
- 		return -EMSGSIZE;
- 
- 	timerval = br_timer_value(&p->message_age_timer);
-@@ -728,6 +730,7 @@ static const struct nla_policy br_port_p
- 	[IFLA_BRPORT_NEIGH_SUPPRESS] = { .type = NLA_U8 },
- 	[IFLA_BRPORT_ISOLATED]	= { .type = NLA_U8 },
- 	[IFLA_BRPORT_BACKUP_PORT] = { .type = NLA_U32 },
-+	[IFLA_BRPORT_BPDU_FILTER] = { .type = NLA_U8 },
- };
- 
- /* Change the state of the port and notify spanning tree */
-@@ -826,6 +829,10 @@ static int br_setport(struct net_bridge_
- 	if (err)
- 		return err;
- 
-+	err = br_set_port_flag(p, tb, IFLA_BRPORT_BPDU_FILTER, BR_BPDU_FILTER);
-+	if (err)
-+		return err;
-+
- 	br_vlan_tunnel_old = (p->flags & BR_VLAN_TUNNEL) ? true : false;
- 	err = br_set_port_flag(p, tb, IFLA_BRPORT_VLAN_TUNNEL, BR_VLAN_TUNNEL);
- 	if (err)
---- a/net/core/rtnetlink.c
-+++ b/net/core/rtnetlink.c
-@@ -55,7 +55,7 @@
- #include <net/net_namespace.h>
- 
- #define RTNL_MAX_TYPE		50
--#define RTNL_SLAVE_MAX_TYPE	36
-+#define RTNL_SLAVE_MAX_TYPE	37
- 
- struct rtnl_link {
- 	rtnl_doit_func		doit;
-@@ -4684,7 +4684,9 @@ int ndo_dflt_bridge_getlink(struct sk_bu
- 	    brport_nla_put_flag(skb, flags, mask,
- 				IFLA_BRPORT_MCAST_FLOOD, BR_MCAST_FLOOD) ||
- 	    brport_nla_put_flag(skb, flags, mask,
--				IFLA_BRPORT_BCAST_FLOOD, BR_BCAST_FLOOD)) {
-+				IFLA_BRPORT_BCAST_FLOOD, BR_BCAST_FLOOD) ||
-+	    brport_nla_put_flag(skb, flags, mask,
-+				IFLA_BRPORT_BPDU_FILTER, BR_BPDU_FILTER)) {
- 		nla_nest_cancel(skb, protinfo);
- 		goto nla_put_failure;
- 	}
diff --git a/target/linux/generic/pending-5.10/750-skb-Do-mix-page-pool-and-page-referenced-frags-in-GR.patch b/target/linux/generic/pending-5.10/750-skb-Do-mix-page-pool-and-page-referenced-frags-in-GR.patch
deleted file mode 100644
index d669a5dd1f93..000000000000
--- a/target/linux/generic/pending-5.10/750-skb-Do-mix-page-pool-and-page-referenced-frags-in-GR.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Alexander Duyck <alexanderduyck@fb.com>
-Date: Thu, 26 Jan 2023 11:06:59 -0800
-Subject: [PATCH] skb: Do mix page pool and page referenced frags in GRO
-
-GSO should not merge page pool recycled frames with standard reference
-counted frames. Traditionally this didn't occur, at least not often.
-However as we start looking at adding support for wireless adapters there
-becomes the potential to mix the two due to A-MSDU repartitioning frames in
-the receive path. There are possibly other places where this may have
-occurred however I suspect they must be few and far between as we have not
-seen this issue until now.
-
-Fixes: 53e0961da1c7 ("page_pool: add frag page recycling support in page pool")
-Reported-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
----
-
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -4164,6 +4164,15 @@ int skb_gro_receive(struct sk_buff *p, s
- 	if (unlikely(p->len + len >= 65536 || NAPI_GRO_CB(skb)->flush))
- 		return -E2BIG;
- 
-+	/* Do not splice page pool based packets w/ non-page pool
-+	 * packets. This can result in reference count issues as page
-+	 * pool pages will not decrement the reference count and will
-+	 * instead be immediately returned to the pool or have frag
-+	 * count decremented.
-+	 */
-+	if (p->pp_recycle != skb->pp_recycle)
-+		return -ETOOMANYREFS;
-+
- 	lp = NAPI_GRO_CB(p)->last;
- 	pinfo = skb_shinfo(lp);
- 
diff --git a/target/linux/generic/pending-5.10/760-net-dsa-mv88e6xxx-fix-vlan-setup.patch b/target/linux/generic/pending-5.10/760-net-dsa-mv88e6xxx-fix-vlan-setup.patch
deleted file mode 100644
index 9c3b81fefb4e..000000000000
--- a/target/linux/generic/pending-5.10/760-net-dsa-mv88e6xxx-fix-vlan-setup.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From a1b291f3f6c80a6c5ccad7283fc472d77a2a4763 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sun, 22 Dec 2019 12:40:11 +0000
-Subject: [PATCH] net: dsa: mv88e6xxx: fix vlan setup
-
-Provide an option that drivers can set to indicate they want to receive
-vlan configuration even when vlan filtering is disabled. This is safe
-for Marvell DSA bridges, which do not look up ingress traffic in the
-VTU if the port is in 8021Q disabled state. Whether this change is
-suitable for all DSA bridges is not known.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
----
- drivers/net/dsa/mv88e6xxx/chip.c |  1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -2934,6 +2934,7 @@ static int mv88e6xxx_setup(struct dsa_sw
- 
- 	chip->ds = ds;
- 	ds->slave_mii_bus = mv88e6xxx_default_mdio_bus(chip);
-+	ds->configure_vlan_while_not_filtering = true;
- 
- 	mv88e6xxx_reg_lock(chip);
- 
diff --git a/target/linux/generic/pending-5.10/762-net-bridge-switchdev-Refactor-br_switchdev_fdb_notif.patch b/target/linux/generic/pending-5.10/762-net-bridge-switchdev-Refactor-br_switchdev_fdb_notif.patch
deleted file mode 100644
index fbc8342b0e05..000000000000
--- a/target/linux/generic/pending-5.10/762-net-bridge-switchdev-Refactor-br_switchdev_fdb_notif.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 46fe6cecb296d850c1ee2b333e57093ac4b733f3 Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Sat, 16 Jan 2021 02:25:09 +0100
-Subject: [PATCH] net: bridge: switchdev: Refactor br_switchdev_fdb_notify
-
-Instead of having to add more and more arguments to
-br_switchdev_fdb_call_notifiers, get rid of it and build the info
-struct directly in br_switchdev_fdb_notify.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
----
- net/bridge/br_switchdev.c | 41 +++++++++++----------------------------
- 1 file changed, 11 insertions(+), 30 deletions(-)
-
---- a/net/bridge/br_switchdev.c
-+++ b/net/bridge/br_switchdev.c
-@@ -102,25 +102,16 @@ int br_switchdev_set_port_flag(struct ne
- 	return 0;
- }
- 
--static void
--br_switchdev_fdb_call_notifiers(bool adding, const unsigned char *mac,
--				u16 vid, struct net_device *dev,
--				bool added_by_user, bool offloaded)
--{
--	struct switchdev_notifier_fdb_info info;
--	unsigned long notifier_type;
--
--	info.addr = mac;
--	info.vid = vid;
--	info.added_by_user = added_by_user;
--	info.offloaded = offloaded;
--	notifier_type = adding ? SWITCHDEV_FDB_ADD_TO_DEVICE : SWITCHDEV_FDB_DEL_TO_DEVICE;
--	call_switchdev_notifiers(notifier_type, dev, &info.info, NULL);
--}
--
- void
- br_switchdev_fdb_notify(const struct net_bridge_fdb_entry *fdb, int type)
- {
-+	struct switchdev_notifier_fdb_info info = {
-+		.addr = fdb->key.addr.addr,
-+		.vid = fdb->key.vlan_id,
-+		.added_by_user = test_bit(BR_FDB_ADDED_BY_USER, &fdb->flags),
-+		.offloaded = test_bit(BR_FDB_OFFLOADED, &fdb->flags),
-+	};
-+
- 	if (!fdb->dst)
- 		return;
- 	if (test_bit(BR_FDB_LOCAL, &fdb->flags))
-@@ -128,22 +119,12 @@ br_switchdev_fdb_notify(const struct net
- 
- 	switch (type) {
- 	case RTM_DELNEIGH:
--		br_switchdev_fdb_call_notifiers(false, fdb->key.addr.addr,
--						fdb->key.vlan_id,
--						fdb->dst->dev,
--						test_bit(BR_FDB_ADDED_BY_USER,
--							 &fdb->flags),
--						test_bit(BR_FDB_OFFLOADED,
--							 &fdb->flags));
-+		call_switchdev_notifiers(SWITCHDEV_FDB_DEL_TO_DEVICE,
-+					 fdb->dst->dev, &info.info, NULL);
- 		break;
- 	case RTM_NEWNEIGH:
--		br_switchdev_fdb_call_notifiers(true, fdb->key.addr.addr,
--						fdb->key.vlan_id,
--						fdb->dst->dev,
--						test_bit(BR_FDB_ADDED_BY_USER,
--							 &fdb->flags),
--						test_bit(BR_FDB_OFFLOADED,
--							 &fdb->flags));
-+		call_switchdev_notifiers(SWITCHDEV_FDB_ADD_TO_DEVICE,
-+					 fdb->dst->dev, &info.info, NULL);
- 		break;
- 	}
- }
diff --git a/target/linux/generic/pending-5.10/763-net-bridge-switchdev-Include-local-flag-in-FDB-notif.patch b/target/linux/generic/pending-5.10/763-net-bridge-switchdev-Include-local-flag-in-FDB-notif.patch
deleted file mode 100644
index 434288c3efbb..000000000000
--- a/target/linux/generic/pending-5.10/763-net-bridge-switchdev-Include-local-flag-in-FDB-notif.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From ec5be4f79026282925ae383caa431a8d41e3456a Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Sat, 16 Jan 2021 02:25:10 +0100
-Subject: [PATCH] net: bridge: switchdev: Include local flag in FDB
- notifications
-
-Some switchdev drivers, notably DSA, ignore all dynamically learned
-address notifications (!added_by_user) as these are autonomously added
-by the switch. Previously, such a notification was indistinguishable
-from a local address notification. Include a local bit in the
-notification so that the two classes can be discriminated.
-
-This allows DSA-like devices to add local addresses to the hardware
-FDB (with the CPU as the destination), thereby avoiding flows towards
-the CPU being flooded by the switch as unknown unicast.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- include/net/switchdev.h   | 1 +
- net/bridge/br_switchdev.c | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/include/net/switchdev.h
-+++ b/include/net/switchdev.h
-@@ -226,6 +226,7 @@ struct switchdev_notifier_fdb_info {
- 	const unsigned char *addr;
- 	u16 vid;
- 	u8 added_by_user:1,
-+	   local:1,
- 	   offloaded:1;
- };
- 
---- a/net/bridge/br_switchdev.c
-+++ b/net/bridge/br_switchdev.c
-@@ -109,6 +109,7 @@ br_switchdev_fdb_notify(const struct net
- 		.addr = fdb->key.addr.addr,
- 		.vid = fdb->key.vlan_id,
- 		.added_by_user = test_bit(BR_FDB_ADDED_BY_USER, &fdb->flags),
-+		.local = test_bit(BR_FDB_LOCAL, &fdb->flags),
- 		.offloaded = test_bit(BR_FDB_OFFLOADED, &fdb->flags),
- 	};
- 
diff --git a/target/linux/generic/pending-5.10/764-net-bridge-switchdev-Send-FDB-notifications-for-host.patch b/target/linux/generic/pending-5.10/764-net-bridge-switchdev-Send-FDB-notifications-for-host.patch
deleted file mode 100644
index 630e03bbfd78..000000000000
--- a/target/linux/generic/pending-5.10/764-net-bridge-switchdev-Send-FDB-notifications-for-host.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 2e50fd9322047253c327550b4485cf8761035a8c Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Sat, 16 Jan 2021 02:25:11 +0100
-Subject: [PATCH] net: bridge: switchdev: Send FDB notifications for host
- addresses
-
-Treat addresses added to the bridge itself in the same way as regular
-ports and send out a notification so that drivers may sync it down to
-the hardware FDB.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- net/bridge/br_fdb.c       |  4 ++--
- net/bridge/br_private.h   |  7 ++++---
- net/bridge/br_switchdev.c | 11 +++++------
- 3 files changed, 11 insertions(+), 11 deletions(-)
-
---- a/net/bridge/br_fdb.c
-+++ b/net/bridge/br_fdb.c
-@@ -602,7 +602,7 @@ void br_fdb_update(struct net_bridge *br
- 			/* fastpath: update of existing entry */
- 			if (unlikely(source != fdb->dst &&
- 				     !test_bit(BR_FDB_STICKY, &fdb->flags))) {
--				br_switchdev_fdb_notify(fdb, RTM_DELNEIGH);
-+				br_switchdev_fdb_notify(br, fdb, RTM_DELNEIGH);
- 				fdb->dst = source;
- 				fdb_modified = true;
- 				/* Take over HW learned entry */
-@@ -735,7 +735,7 @@ static void fdb_notify(struct net_bridge
- 	int err = -ENOBUFS;
- 
- 	if (swdev_notify)
--		br_switchdev_fdb_notify(fdb, type);
-+		br_switchdev_fdb_notify(br, fdb, type);
- 
- 	skb = nlmsg_new(fdb_nlmsg_size(), GFP_ATOMIC);
- 	if (skb == NULL)
---- a/net/bridge/br_private.h
-+++ b/net/bridge/br_private.h
-@@ -1525,8 +1525,8 @@ bool nbp_switchdev_allowed_egress(const
- int br_switchdev_set_port_flag(struct net_bridge_port *p,
- 			       unsigned long flags,
- 			       unsigned long mask);
--void br_switchdev_fdb_notify(const struct net_bridge_fdb_entry *fdb,
--			     int type);
-+void br_switchdev_fdb_notify(struct net_bridge *br,
-+			     const struct net_bridge_fdb_entry *fdb, int type);
- int br_switchdev_port_vlan_add(struct net_device *dev, u16 vid, u16 flags,
- 			       struct netlink_ext_ack *extack);
- int br_switchdev_port_vlan_del(struct net_device *dev, u16 vid);
-@@ -1572,7 +1572,8 @@ static inline int br_switchdev_port_vlan
- }
- 
- static inline void
--br_switchdev_fdb_notify(const struct net_bridge_fdb_entry *fdb, int type)
-+br_switchdev_fdb_notify(struct net_bridge *br,
-+			const struct net_bridge_fdb_entry *fdb, int type)
- {
- }
- 
---- a/net/bridge/br_switchdev.c
-+++ b/net/bridge/br_switchdev.c
-@@ -103,7 +103,8 @@ int br_switchdev_set_port_flag(struct ne
- }
- 
- void
--br_switchdev_fdb_notify(const struct net_bridge_fdb_entry *fdb, int type)
-+br_switchdev_fdb_notify(struct net_bridge *br,
-+			const struct net_bridge_fdb_entry *fdb, int type)
- {
- 	struct switchdev_notifier_fdb_info info = {
- 		.addr = fdb->key.addr.addr,
-@@ -112,20 +113,19 @@ br_switchdev_fdb_notify(const struct net
- 		.local = test_bit(BR_FDB_LOCAL, &fdb->flags),
- 		.offloaded = test_bit(BR_FDB_OFFLOADED, &fdb->flags),
- 	};
-+	struct net_device *dev = fdb->dst ? fdb->dst->dev : br->dev;
- 
--	if (!fdb->dst)
--		return;
- 	if (test_bit(BR_FDB_LOCAL, &fdb->flags))
- 		return;
- 
- 	switch (type) {
- 	case RTM_DELNEIGH:
- 		call_switchdev_notifiers(SWITCHDEV_FDB_DEL_TO_DEVICE,
--					 fdb->dst->dev, &info.info, NULL);
-+					 dev, &info.info, NULL);
- 		break;
- 	case RTM_NEWNEIGH:
- 		call_switchdev_notifiers(SWITCHDEV_FDB_ADD_TO_DEVICE,
--					 fdb->dst->dev, &info.info, NULL);
-+					 dev, &info.info, NULL);
- 		break;
- 	}
- }
diff --git a/target/linux/generic/pending-5.10/765-net-dsa-Include-local-addresses-in-assisted-CPU-port.patch b/target/linux/generic/pending-5.10/765-net-dsa-Include-local-addresses-in-assisted-CPU-port.patch
deleted file mode 100644
index c0b4fd1d1451..000000000000
--- a/target/linux/generic/pending-5.10/765-net-dsa-Include-local-addresses-in-assisted-CPU-port.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From dd082716b43a3684b2f473ae5d1e76d1c076d86d Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Sat, 16 Jan 2021 02:25:12 +0100
-Subject: [PATCH] net: dsa: Include local addresses in assisted CPU port
- learning
-
-Add local addresses (i.e. the ports' MAC addresses) to the hardware
-FDB when assisted CPU port learning is enabled.
-
-NOTE: The bridge's own MAC address is also "local". If that address is
-not shared with any port, the bridge's MAC is not be added by this
-functionality - but the following commit takes care of that case.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- net/dsa/slave.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -2192,10 +2192,12 @@ static int dsa_slave_switchdev_event(str
- 		fdb_info = ptr;
- 
- 		if (dsa_slave_dev_check(dev)) {
--			if (!fdb_info->added_by_user)
--				return NOTIFY_OK;
--
- 			dp = dsa_slave_to_port(dev);
-+
-+			if (fdb_info->local && dp->ds->assisted_learning_on_cpu_port)
-+				dp = dp->cpu_dp;
-+			else if (!fdb_info->added_by_user)
-+				return NOTIFY_OK;
- 		} else {
- 			/* Snoop addresses learnt on foreign interfaces
- 			 * bridged with us, for switches that don't
diff --git a/target/linux/generic/pending-5.10/766-net-dsa-Include-bridge-addresses-in-assisted-CPU-por.patch b/target/linux/generic/pending-5.10/766-net-dsa-Include-bridge-addresses-in-assisted-CPU-por.patch
deleted file mode 100644
index 0b644d8300ca..000000000000
--- a/target/linux/generic/pending-5.10/766-net-dsa-Include-bridge-addresses-in-assisted-CPU-por.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 0663ebde114a6fb2c28c622ba5212b302d4d2581 Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Sat, 16 Jan 2021 02:25:13 +0100
-Subject: [PATCH] net: dsa: Include bridge addresses in assisted CPU port
- learning
-
-Now that notifications are sent out for addresses added to the bridge
-itself, extend DSA to include those addresses in the hardware FDB when
-assisted CPU port learning is enabled.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- net/dsa/slave.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -2206,7 +2206,11 @@ static int dsa_slave_switchdev_event(str
- 			struct net_device *br_dev;
- 			struct dsa_slave_priv *p;
- 
--			br_dev = netdev_master_upper_dev_get_rcu(dev);
-+			if (netif_is_bridge_master(dev))
-+				br_dev = dev;
-+			else
-+				br_dev = netdev_master_upper_dev_get_rcu(dev);
-+
- 			if (!br_dev)
- 				return NOTIFY_DONE;
- 
diff --git a/target/linux/generic/pending-5.10/767-net-dsa-Sync-static-FDB-entries-on-foreign-interface.patch b/target/linux/generic/pending-5.10/767-net-dsa-Sync-static-FDB-entries-on-foreign-interface.patch
deleted file mode 100644
index f71ea16b97ba..000000000000
--- a/target/linux/generic/pending-5.10/767-net-dsa-Sync-static-FDB-entries-on-foreign-interface.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 81e39fd78db82fb51b05fff309b9c521f1a0bc5a Mon Sep 17 00:00:00 2001
-From: Tobias Waldekranz <tobias@waldekranz.com>
-Date: Sat, 16 Jan 2021 02:25:14 +0100
-Subject: [PATCH] net: dsa: Sync static FDB entries on foreign interfaces to
- hardware
-
-Reuse the "assisted_learning_on_cpu_port" functionality to always add
-entries for user-configured entries on foreign interfaces, even if
-assisted_learning_on_cpu_port is not enabled. E.g. in this situation:
-
-   br0
-   / \
-swp0 dummy0
-
-$ bridge fdb add 02:00:de:ad:00:01 dev dummy0 vlan 1 master
-
-Results in DSA adding an entry in the hardware FDB, pointing this
-address towards the CPU port.
-
-The same is true for entries added to the bridge itself, e.g:
-
-$ bridge fdb add 02:00:de:ad:00:01 dev br0 vlan 1 self
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- net/dsa/slave.c | 12 ++++++++----
- 1 file changed, 8 insertions(+), 4 deletions(-)
-
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -2199,9 +2199,12 @@ static int dsa_slave_switchdev_event(str
- 			else if (!fdb_info->added_by_user)
- 				return NOTIFY_OK;
- 		} else {
--			/* Snoop addresses learnt on foreign interfaces
--			 * bridged with us, for switches that don't
--			 * automatically learn SA from CPU-injected traffic
-+			/* Snoop addresses added to foreign interfaces
-+			 * bridged with us, or the bridge
-+			 * itself. Dynamically learned addresses can
-+			 * also be added for switches that don't
-+			 * automatically learn SA from CPU-injected
-+			 * traffic.
- 			 */
- 			struct net_device *br_dev;
- 			struct dsa_slave_priv *p;
-@@ -2223,7 +2226,8 @@ static int dsa_slave_switchdev_event(str
- 
- 			dp = p->dp->cpu_dp;
- 
--			if (!dp->ds->assisted_learning_on_cpu_port)
-+			if (!fdb_info->added_by_user &&
-+			    !dp->ds->assisted_learning_on_cpu_port)
- 				return NOTIFY_DONE;
- 		}
- 
diff --git a/target/linux/generic/pending-5.10/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch b/target/linux/generic/pending-5.10/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch
deleted file mode 100644
index 07a166125b53..000000000000
--- a/target/linux/generic/pending-5.10/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From:   Tobias Waldekranz <tobias@waldekranz.com>
-Subject: [RFC net-next 7/7] net: dsa: mv88e6xxx: Request assisted learning on CPU port
-Date:   Sat, 16 Jan 2021 02:25:15 +0100
-Archived-At: <https://lore.kernel.org/netdev/20210116012515.3152-8-tobias@waldekranz.com/>
-
-While the hardware is capable of performing learning on the CPU port,
-it requires alot of additions to the bridge's forwarding path in order
-to handle multi-destination traffic correctly.
-
-Until that is in place, opt for the next best thing and let DSA sync
-the relevant addresses down to the hardware FDB.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- drivers/net/dsa/mv88e6xxx/chip.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -5503,6 +5503,7 @@ static int mv88e6xxx_register_switch(str
- 	ds->ops = &mv88e6xxx_switch_ops;
- 	ds->ageing_time_min = chip->info->age_time_coeff;
- 	ds->ageing_time_max = chip->info->age_time_coeff * U8_MAX;
-+	ds->assisted_learning_on_cpu_port = true;
- 
- 	dev_set_drvdata(dev, ds);
- 
diff --git a/target/linux/generic/pending-5.10/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch b/target/linux/generic/pending-5.10/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch
deleted file mode 100644
index fcf7892c04e7..000000000000
--- a/target/linux/generic/pending-5.10/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From patchwork Thu Aug  5 22:23:30 2021
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 12422209
-Date: Thu, 5 Aug 2021 23:23:30 +0100
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
- linux-kernel@vger.kernel.org
-Cc: "David S. Miller" <davem@davemloft.net>, Andrew Lunn <andrew@lunn.ch>,
- Michael Walle <michael@walle.cc>
-Subject: [PATCH] ARM: kirkwood: add missing <linux/if_ether.h> for ETH_ALEN
-Message-ID: <YQxk4jrbm31NM1US@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-X-BeenThere: linux-arm-kernel@lists.infradead.org
-X-Mailman-Version: 2.1.34
-Precedence: list
-List-Id: <linux-arm-kernel.lists.infradead.org>
-List-Archive: <http://lists.infradead.org/pipermail/linux-arm-kernel/>
-Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org>
-
-After commit 83216e3988cd1 ("of: net: pass the dst buffer to
-of_get_mac_address()") build fails for kirkwood as ETH_ALEN is not
-defined.
-
-arch/arm/mach-mvebu/kirkwood.c: In function 'kirkwood_dt_eth_fixup':
-arch/arm/mach-mvebu/kirkwood.c:87:13: error: 'ETH_ALEN' undeclared (first use in this function); did you mean 'ESTALE'?
-   u8 tmpmac[ETH_ALEN];
-             ^~~~~~~~
-             ESTALE
-arch/arm/mach-mvebu/kirkwood.c:87:13: note: each undeclared identifier is reported only once for each function it appears in
-arch/arm/mach-mvebu/kirkwood.c:87:6: warning: unused variable 'tmpmac' [-Wunused-variable]
-   u8 tmpmac[ETH_ALEN];
-      ^~~~~~
-make[5]: *** [scripts/Makefile.build:262: arch/arm/mach-mvebu/kirkwood.o] Error 1
-make[5]: *** Waiting for unfinished jobs....
-
-Add missing #include <linux/if_ether.h> to fix this.
-
-Cc: David S. Miller <davem@davemloft.net>
-Cc: Andrew Lunn <andrew@lunn.ch>
-Cc: Michael Walle <michael@walle.cc>
-Reported-by: https://buildbot.openwrt.org/master/images/#/builders/56/builds/220/steps/44/logs/stdio
-Fixes: 83216e3988cd1 ("of: net: pass the dst buffer to of_get_mac_address()")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- arch/arm/mach-mvebu/kirkwood.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/mach-mvebu/kirkwood.c
-+++ b/arch/arm/mach-mvebu/kirkwood.c
-@@ -14,6 +14,7 @@
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/mbus.h>
-+#include <linux/if_ether.h>
- #include <linux/of.h>
- #include <linux/of_address.h>
- #include <linux/of_net.h>
diff --git a/target/linux/generic/pending-5.10/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch b/target/linux/generic/pending-5.10/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
deleted file mode 100644
index 511a9f755513..000000000000
--- a/target/linux/generic/pending-5.10/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] bcma: get SoC device struct & copy its DMA params to the
- subdevices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-For bus devices to be fully usable it's required to set their DMA
-parameters.
-
-For years it has been missing and remained unnoticed because of
-mips_dma_alloc_coherent() silently handling the empty coherent_dma_mask.
-Kernel 4.19 came with a lot of DMA changes and caused a regression on
-the bcm47xx. Starting with the commit f8c55dc6e828 ("MIPS: use generic
-dma noncoherent ops for simple noncoherent platforms") DMA coherent
-allocations just fail. Example:
-[    1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed
-[    1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA
-[    1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12
-[    1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
-
-This change fixes above regression in addition to the MIPS bcm47xx
-commit 321c46b91550 ("MIPS: BCM47XX: Setup struct device for the SoC").
-
-It also fixes another *old* GPIO regression caused by a parent pointing
-to the NULL:
-[    0.157054] missing gpiochip .dev parent pointer
-[    0.157287] bcma: bus0: Error registering GPIO driver: -22
-introduced by the commit 74f4e0cc6108 ("bcma: switch GPIO portions to
-use GPIOLIB_IRQCHIP").
-
-Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms")
-Fixes: 74f4e0cc6108 ("bcma: switch GPIO portions to use GPIOLIB_IRQCHIP")
-Cc: linux-mips@linux-mips.org
-Cc: Christoph Hellwig <hch@lst.de>
-Cc: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/bcma/host_soc.c
-+++ b/drivers/bcma/host_soc.c
-@@ -191,6 +191,8 @@ int __init bcma_host_soc_init(struct bcm
- 	struct bcma_bus *bus = &soc->bus;
- 	int err;
- 
-+	bus->dev = soc->dev;
-+
- 	/* Scan bus and initialize it */
- 	err = bcma_bus_early_register(bus);
- 	if (err)
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -241,8 +241,10 @@ void bcma_prepare_core(struct bcma_bus *
- 	core->dev.bus = &bcma_bus_type;
- 	dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
- 	core->dev.parent = bus->dev;
--	if (bus->dev)
-+	if (bus->dev) {
- 		bcma_of_fill_device(bus->dev, core);
-+		dma_coerce_mask_and_coherent(&core->dev, bus->dev->coherent_dma_mask);
-+	}
- 
- 	switch (bus->hosttype) {
- 	case BCMA_HOSTTYPE_PCI:
diff --git a/target/linux/generic/pending-5.10/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch b/target/linux/generic/pending-5.10/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch
deleted file mode 100644
index af44ff24aca1..000000000000
--- a/target/linux/generic/pending-5.10/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch
+++ /dev/null
@@ -1,222 +0,0 @@
-From fc23ea48ba52c24f201fe5ca0132ee1a3de5a70a Mon Sep 17 00:00:00 2001
-From: Mauri Sandberg <maukka@ext.kapsi.fi>
-Date: Thu, 25 Mar 2021 11:48:05 +0200
-Subject: [PATCH 2/2] gpio: gpio-cascade: add generic GPIO cascade
-
-Adds support for building cascades of GPIO lines. That is, it allows
-setups when there is one upstream line and multiple cascaded lines, out
-of which one can be chosen at a time. The status of the upstream line
-can be conveyed to the selected cascaded line or, vice versa, the status
-of the cascaded line can be conveyed to the upstream line.
-
-A multiplexer is being used to select, which cascaded GPIO line is being
-used at any given time.
-
-At the moment only input direction is supported. In future it should be
-possible to add support for output direction, too.
-
-Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
-Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
-Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
----
-v7 -> v8:
- - rearrange members in struct gpio_cascade
- - cosmetic changes in file header and in one function declaration
- - added Reviewed-by tags by Linus and Andy
-v6 -> v7:
- - In Kconfig add info about module name
- - adhere to new convention that allows lines longer than 80 chars
- - use dev_probe_err with upstream gpio line too
- - refactor for cleaner exit of probe function.
-v5 -> v6:
- - In Kconfig, remove dependency to OF_GPIO and select only MULTIPLEXER
- - refactor code preferring one-liners
- - clean up prints, removing them from success-path.
- - don't explicitly set gpio_chip.of_node as it's done in the GPIO library
- - use devm_gpiochip_add_data instead of gpiochip_add
-v4 -> v5:
- - renamed gpio-mux-input -> gpio-cascade. refactored code accordingly
-   here and there and changed to use new bindings and compatible string
-   - ambigious and vague 'pin' was rename to 'upstream_line'
- - dropped Tested-by and Reviewed-by due to changes in bindings
- - dropped Reported-by suggested by an automatic bot as it was not really
-   appropriate to begin with
- - functionally it's the same as v4
-v3 -> v4:
- - Changed author email
- - Included Tested-by and Reviewed-by from Drew
-v2 -> v3:
- - use managed device resources
- - update Kconfig description
-v1 -> v2:
- - removed .owner from platform_driver as per test bot's instruction
- - added MODULE_AUTHOR, MODULE_DESCRIPTION, MODULE_LICENSE
- - added gpio_mux_input_get_direction as it's recommended for all chips
- - removed because this is input only chip: gpio_mux_input_set_value
- - removed because they are not needed for input/output only chips:
-     gpio_mux_input_direction_input
-     gpio_mux_input_direction_output
- - fixed typo in an error message
- - added info message about successful registration
- - removed can_sleep flag as this does not sleep while getting GPIO value
-   like I2C or SPI do
- - Updated description in Kconfig
----
- drivers/gpio/Kconfig        |  15 +++++
- drivers/gpio/Makefile       |   1 +
- drivers/gpio/gpio-cascade.c | 117 ++++++++++++++++++++++++++++++++++++
- 3 files changed, 133 insertions(+)
- create mode 100644 drivers/gpio/gpio-cascade.c
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -1617,4 +1617,19 @@ config GPIO_MOCKUP
- 	  tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
- 	  it.
- 
-+comment "Other GPIO expanders"
-+
-+config GPIO_CASCADE
-+	tristate "General GPIO cascade"
-+	select MULTIPLEXER
-+	help
-+	  Say yes here to enable support for generic GPIO cascade.
-+
-+	  This allows building one-to-many cascades of GPIO lines using
-+	  different types of multiplexers readily available. At the
-+	  moment only input lines are supported.
-+
-+	  To build the driver as a module choose 'm' and the resulting module
-+	  will be called 'gpio-cascade'.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -44,6 +44,7 @@ obj-$(CONFIG_GPIO_BD9571MWV)		+= gpio-bd
- obj-$(CONFIG_GPIO_BRCMSTB)		+= gpio-brcmstb.o
- obj-$(CONFIG_GPIO_BT8XX)		+= gpio-bt8xx.o
- obj-$(CONFIG_GPIO_CADENCE)		+= gpio-cadence.o
-+obj-$(CONFIG_GPIO_CASCADE)		+= gpio-cascade.o
- obj-$(CONFIG_GPIO_CLPS711X)		+= gpio-clps711x.o
- obj-$(CONFIG_GPIO_SNPS_CREG)		+= gpio-creg-snps.o
- obj-$(CONFIG_GPIO_CRYSTAL_COVE)		+= gpio-crystalcove.o
---- /dev/null
-+++ b/drivers/gpio/gpio-cascade.c
-@@ -0,0 +1,117 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ *  A generic GPIO cascade driver
-+ *
-+ *  Copyright (C) 2021 Mauri Sandberg <maukka@ext.kapsi.fi>
-+ *
-+ * This allows building cascades of GPIO lines in a manner illustrated
-+ * below:
-+ *
-+ *                 /|---- Cascaded GPIO line 0
-+ *  Upstream      | |---- Cascaded GPIO line 1
-+ *  GPIO line ----+ | .
-+ *                | | .
-+ *                 \|---- Cascaded GPIO line n
-+ *
-+ * A multiplexer is being used to select, which cascaded line is being
-+ * addressed at any given time.
-+ *
-+ * At the moment only input mode is supported due to lack of means for
-+ * testing output functionality. At least theoretically output should be
-+ * possible with open drain constructions.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+#include <linux/mux/consumer.h>
-+
-+#include <linux/gpio/consumer.h>
-+#include <linux/gpio/driver.h>
-+
-+struct gpio_cascade {
-+	struct gpio_chip	gpio_chip;
-+	struct device		*parent;
-+	struct mux_control	*mux_control;
-+	struct gpio_desc	*upstream_line;
-+};
-+
-+static struct gpio_cascade *chip_to_cascade(struct gpio_chip *gc)
-+{
-+	return container_of(gc, struct gpio_cascade, gpio_chip);
-+}
-+
-+static int gpio_cascade_get_direction(struct gpio_chip *gc, unsigned int offset)
-+{
-+	return GPIO_LINE_DIRECTION_IN;
-+}
-+
-+static int gpio_cascade_get_value(struct gpio_chip *gc, unsigned int offset)
-+{
-+	struct gpio_cascade *cas = chip_to_cascade(gc);
-+	int ret;
-+
-+	ret = mux_control_select(cas->mux_control, offset);
-+	if (ret)
-+		return ret;
-+
-+	ret = gpiod_get_value(cas->upstream_line);
-+	mux_control_deselect(cas->mux_control);
-+	return ret;
-+}
-+
-+static int gpio_cascade_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct gpio_cascade *cas;
-+	struct mux_control *mc;
-+	struct gpio_desc *upstream;
-+	struct gpio_chip *gc;
-+
-+	cas = devm_kzalloc(dev, sizeof(*cas), GFP_KERNEL);
-+	if (!cas)
-+		return -ENOMEM;
-+
-+	mc = devm_mux_control_get(dev, NULL);
-+	if (IS_ERR(mc))
-+		return dev_err_probe(dev, PTR_ERR(mc), "unable to get mux-control\n");
-+
-+	cas->mux_control = mc;
-+	upstream = devm_gpiod_get(dev, "upstream",  GPIOD_IN);
-+	if (IS_ERR(upstream))
-+		return dev_err_probe(dev, PTR_ERR(upstream), "unable to claim upstream GPIO line\n");
-+
-+	cas->upstream_line = upstream;
-+	cas->parent = dev;
-+
-+	gc = &cas->gpio_chip;
-+	gc->get = gpio_cascade_get_value;
-+	gc->get_direction = gpio_cascade_get_direction;
-+	gc->base = -1;
-+	gc->ngpio = mux_control_states(mc);
-+	gc->label = dev_name(cas->parent);
-+	gc->parent = cas->parent;
-+	gc->owner = THIS_MODULE;
-+
-+	platform_set_drvdata(pdev, cas);
-+	return devm_gpiochip_add_data(dev, &cas->gpio_chip, NULL);
-+}
-+
-+static const struct of_device_id gpio_cascade_id[] = {
-+	{ .compatible = "gpio-cascade" },
-+	{ /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, gpio_cascade_id);
-+
-+static struct platform_driver gpio_cascade_driver = {
-+	.driver	= {
-+		.name		= "gpio-cascade",
-+		.of_match_table = gpio_cascade_id,
-+	},
-+	.probe	= gpio_cascade_probe,
-+};
-+module_platform_driver(gpio_cascade_driver);
-+
-+MODULE_AUTHOR("Mauri Sandberg <maukka@ext.kapsi.fi>");
-+MODULE_DESCRIPTION("Generic GPIO cascade");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/pending-5.10/802-nvmem-u-boot-env-align-endianness-of-crc32-values.patch b/target/linux/generic/pending-5.10/802-nvmem-u-boot-env-align-endianness-of-crc32-values.patch
deleted file mode 100644
index 9b111050eeff..000000000000
--- a/target/linux/generic/pending-5.10/802-nvmem-u-boot-env-align-endianness-of-crc32-values.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 0e71cac033bb7689c4dfa2e6814191337ef770f5 Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Thu, 13 Oct 2022 00:51:33 +0900
-Subject: [PATCH] nvmem: u-boot-env: align endianness of crc32 values
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch fixes crc32 error on Big-Endianness system by conversion of
-calculated crc32 value.
-
-Little-Endianness system:
-
-  obtained crc32: Little
-calculated crc32: Little
-
-Big-Endianness system:
-
-  obtained crc32: Little
-calculated crc32: Big
-
-log (APRESIA ApresiaLightGS120GT-SS, RTL8382M, Big-Endianness):
-
-[    8.570000] u_boot_env 18001200.spi:flash@0:partitions:partition@c0000: Invalid calculated CRC32: 0x88cd6f09 (expected: 0x096fcd88)
-[    8.580000] u_boot_env: probe of 18001200.spi:flash@0:partitions:partition@c0000 failed with error -22
-
-Fixes: f955dc1445069 ("nvmem: add driver handling U-Boot environment variables")
-
-Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Tested-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- drivers/nvmem/u-boot-env.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -182,7 +182,7 @@ static int u_boot_env_parse(struct u_boo
- 	crc32_data_len = priv->mtd->size - crc32_data_offset;
- 	data_len = priv->mtd->size - data_offset;
- 
--	calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
-+	calc = le32_to_cpu((__le32)crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L);
- 	if (calc != crc32) {
- 		dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32);
- 		err = -EINVAL;
diff --git a/target/linux/generic/pending-5.10/810-pci_disable_common_quirks.patch b/target/linux/generic/pending-5.10/810-pci_disable_common_quirks.patch
deleted file mode 100644
index ac232c719733..000000000000
--- a/target/linux/generic/pending-5.10/810-pci_disable_common_quirks.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: debloat: add kernel config option to disabling common PCI quirks
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/pci/Kconfig  | 6 ++++++
- drivers/pci/quirks.c | 6 ++++++
- 2 files changed, 12 insertions(+)
-
---- a/drivers/pci/Kconfig
-+++ b/drivers/pci/Kconfig
-@@ -118,6 +118,13 @@ config XEN_PCIDEV_FRONTEND
- 	  The PCI device frontend driver allows the kernel to import arbitrary
- 	  PCI devices from a PCI backend to support PCI driver domains.
- 
-+config PCI_DISABLE_COMMON_QUIRKS
-+	bool "PCI disable common quirks"
-+	depends on PCI
-+	help
-+	  If you don't know what to do here, say N.
-+
-+
- config PCI_ATS
- 	bool
- 
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -206,6 +206,7 @@ static void quirk_mmio_always_on(struct
- DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
- 				PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /*
-  * The Mellanox Tavor device gives false positive parity errors.  Mark this
-  * device with a broken_parity_status to allow PCI scanning code to "skip"
-@@ -3335,6 +3336,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
- 
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
- /*
-  * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
-  * To work around this, query the size it should be configured to by the
-@@ -3360,6 +3363,8 @@ static void quirk_intel_ntb(struct pci_d
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- /*
-  * Some BIOS implementations leave the Intel GPU interrupts enabled, even
-  * though no one is handling them (e.g., if the i915 driver is never
-@@ -3398,6 +3403,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
- 
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
- /*
-  * PCI devices which are on Intel chips can skip the 10ms delay
-  * before entering D3 mode.
diff --git a/target/linux/generic/pending-5.10/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/pending-5.10/811-pci_disable_usb_common_quirks.patch
deleted file mode 100644
index 488f90a8d4f9..000000000000
--- a/target/linux/generic/pending-5.10/811-pci_disable_usb_common_quirks.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: debloat: disable common USB quirks
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
- drivers/usb/host/pci-quirks.h | 18 +++++++++++++++++-
- include/linux/usb/hcd.h       |  7 +++++++
- 3 files changed, 40 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/host/pci-quirks.c
-+++ b/drivers/usb/host/pci-quirks.c
-@@ -128,6 +128,8 @@ struct amd_chipset_type {
- 	u8 rev;
- };
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static struct amd_chipset_info {
- 	struct pci_dev	*nb_dev;
- 	struct pci_dev	*smbus_dev;
-@@ -633,6 +635,10 @@ bool usb_amd_pt_check_port(struct device
- }
- EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
- 
-+#endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
-+#if IS_ENABLED(CONFIG_USB_UHCI_HCD)
-+
- /*
-  * Make sure the controller is completely inactive, unable to
-  * generate interrupts or do DMA.
-@@ -712,8 +718,17 @@ reset_needed:
- 	uhci_reset_hc(pdev, base);
- 	return 1;
- }
-+#else
-+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
-+{
-+	return 0;
-+}
-+
-+#endif
- EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
- {
- 	u16 cmd;
-@@ -1285,3 +1300,4 @@ static void quirk_usb_early_handoff(stru
- }
- DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
- 			PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
-+#endif
---- a/drivers/usb/host/pci-quirks.h
-+++ b/drivers/usb/host/pci-quirks.h
-@@ -5,6 +5,9 @@
- #ifdef CONFIG_USB_PCI
- void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
- int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-+#endif  /* CONFIG_USB_PCI */
-+
-+#if defined(CONFIG_USB_PCI) && !defined(CONFIG_PCI_DISABLE_COMMON_QUIRKS)
- int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
- bool usb_amd_hang_symptom_quirk(void);
- bool usb_amd_prefetch_quirk(void);
-@@ -19,6 +22,18 @@ void sb800_prefetch(struct device *dev,
- bool usb_amd_pt_check_port(struct device *device, int port);
- #else
- struct pci_dev;
-+static inline int usb_amd_quirk_pll_check(void)
-+{
-+	return 0;
-+}
-+static inline bool usb_amd_hang_symptom_quirk(void)
-+{
-+	return false;
-+}
-+static inline bool usb_amd_prefetch_quirk(void)
-+{
-+	return false;
-+}
- static inline void usb_amd_quirk_pll_disable(void) {}
- static inline void usb_amd_quirk_pll_enable(void) {}
- static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
-@@ -29,6 +44,11 @@ static inline bool usb_amd_pt_check_port
- {
- 	return false;
- }
-+static inline void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) {}
-+static inline bool usb_xhci_needs_pci_reset(struct pci_dev *pdev)
-+{
-+	return false;
-+}
- #endif  /* CONFIG_USB_PCI */
- 
- #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
---- a/include/linux/usb/hcd.h
-+++ b/include/linux/usb/hcd.h
-@@ -487,7 +487,14 @@ extern int usb_hcd_pci_probe(struct pci_
- extern void usb_hcd_pci_remove(struct pci_dev *dev);
- extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
-+#else
-+static inline int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev)
-+{
-+	return 0;
-+}
-+#endif
- 
- #ifdef CONFIG_PM
- extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
diff --git a/target/linux/generic/pending-5.10/820-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch b/target/linux/generic/pending-5.10/820-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
deleted file mode 100644
index 33eb34c913ea..000000000000
--- a/target/linux/generic/pending-5.10/820-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From d9c8bc8c1408f3e8529db6e4e04017b4c579c342 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 18 Feb 2018 17:08:04 +0100
-Subject: [PATCH] w1: gpio: fix problem with platfom data in w1-gpio
-
-In devices, where fdt is used, is impossible to apply platform data
-without proper fdt node.
-
-This patch allow to use platform data in devices with fdt.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- drivers/w1/masters/w1-gpio.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/w1/masters/w1-gpio.c
-+++ b/drivers/w1/masters/w1-gpio.c
-@@ -76,7 +76,7 @@ static int w1_gpio_probe(struct platform
- 	enum gpiod_flags gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
- 	int err;
- 
--	if (of_have_populated_dt()) {
-+	if (of_have_populated_dt() && !dev_get_platdata(&pdev->dev)) {
- 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- 		if (!pdata)
- 			return -ENOMEM;
diff --git a/target/linux/generic/pending-5.10/834-ledtrig-libata.patch b/target/linux/generic/pending-5.10/834-ledtrig-libata.patch
deleted file mode 100644
index 636fe24aea57..000000000000
--- a/target/linux/generic/pending-5.10/834-ledtrig-libata.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: libata: add ledtrig support
-
-This adds a LED trigger for each ATA port indicating disk activity.
-
-As this is needed only on specific platforms (NAS SoCs and such),
-these platforms should define ARCH_WANTS_LIBATA_LEDS if there
-are boards with LED(s) intended to indicate ATA disk activity and
-need the OS to take care of that.
-In that way, if not selected, LED trigger support not will be
-included in libata-core and both, codepaths and structures remain
-untouched.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/ata/Kconfig       | 16 ++++++++++++++++
- drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++
- include/linux/libata.h    |  9 +++++++++
- 3 files changed, 66 insertions(+)
-
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -67,6 +67,22 @@ config ATA_FORCE
- 
- 	  If unsure, say Y.
- 
-+config ARCH_WANT_LIBATA_LEDS
-+	bool
-+
-+config ATA_LEDS
-+	bool "support ATA port LED triggers"
-+	depends on ARCH_WANT_LIBATA_LEDS
-+	select NEW_LEDS
-+	select LEDS_CLASS
-+	select LEDS_TRIGGERS
-+	default y
-+	help
-+	  This option adds a LED trigger for each registered ATA port.
-+	  It is used to drive disk activity leds connected via GPIO.
-+
-+	  If unsure, say N.
-+
- config ATA_ACPI
- 	bool "ATA ACPI Support"
- 	depends on ACPI
---- a/drivers/ata/libata-core.c
-+++ b/drivers/ata/libata-core.c
-@@ -650,6 +650,19 @@ u64 ata_tf_read_block(const struct ata_t
- 	return block;
- }
- 
-+#ifdef CONFIG_ATA_LEDS
-+#define LIBATA_BLINK_DELAY 20 /* ms */
-+static inline void ata_led_act(struct ata_port *ap)
-+{
-+	unsigned long led_delay = LIBATA_BLINK_DELAY;
-+
-+	if (unlikely(!ap->ledtrig))
-+		return;
-+
-+	led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
-+}
-+#endif
-+
- /**
-  *	ata_build_rw_tf - Build ATA taskfile for given read/write request
-  *	@tf: Target ATA taskfile
-@@ -4555,6 +4568,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
- 		if (tag < 0)
- 			return NULL;
- 	}
-+#ifdef CONFIG_ATA_LEDS
-+	ata_led_act(ap);
-+#endif
- 
- 	qc = __ata_qc_from_tag(ap, tag);
- 	qc->tag = qc->hw_tag = tag;
-@@ -5333,6 +5349,9 @@ struct ata_port *ata_port_alloc(struct a
- 	ap->stats.unhandled_irq = 1;
- 	ap->stats.idle_irq = 1;
- #endif
-+#ifdef CONFIG_ATA_LEDS
-+	ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
-+#endif
- 	ata_sff_port_init(ap);
- 
- 	return ap;
-@@ -5368,6 +5387,12 @@ static void ata_host_release(struct kref
- 
- 		kfree(ap->pmp_link);
- 		kfree(ap->slave_link);
-+#ifdef CONFIG_ATA_LEDS
-+		if (ap->ledtrig) {
-+			led_trigger_unregister(ap->ledtrig);
-+			kfree(ap->ledtrig);
-+		};
-+#endif
- 		kfree(ap);
- 		host->ports[i] = NULL;
- 	}
-@@ -5774,7 +5799,23 @@ int ata_host_register(struct ata_host *h
- 		host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
- 		host->ports[i]->local_port_no = i + 1;
- 	}
-+#ifdef CONFIG_ATA_LEDS
-+	for (i = 0; i < host->n_ports; i++) {
-+		if (unlikely(!host->ports[i]->ledtrig))
-+			continue;
- 
-+		snprintf(host->ports[i]->ledtrig_name,
-+			sizeof(host->ports[i]->ledtrig_name), "ata%u",
-+			host->ports[i]->print_id);
-+
-+		host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name;
-+
-+		if (led_trigger_register(host->ports[i]->ledtrig)) {
-+			kfree(host->ports[i]->ledtrig);
-+			host->ports[i]->ledtrig = NULL;
-+		}
-+	}
-+#endif
- 	/* Create associated sysfs transport objects  */
- 	for (i = 0; i < host->n_ports; i++) {
- 		rc = ata_tport_add(host->dev,host->ports[i]);
---- a/include/linux/libata.h
-+++ b/include/linux/libata.h
-@@ -23,6 +23,9 @@
- #include <linux/cdrom.h>
- #include <linux/sched.h>
- #include <linux/async.h>
-+#ifdef CONFIG_ATA_LEDS
-+#include <linux/leds.h>
-+#endif
- 
- /*
-  * Define if arch has non-standard setup.  This is a _PCI_ standard
-@@ -883,6 +886,12 @@ struct ata_port {
- #ifdef CONFIG_ATA_ACPI
- 	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
- #endif
-+
-+#ifdef CONFIG_ATA_LEDS
-+	struct led_trigger	*ledtrig;
-+	char			ledtrig_name[8];
-+#endif
-+
- 	/* owned by EH */
- 	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
- };
diff --git a/target/linux/generic/pending-5.10/840-hwrng-bcm2835-set-quality-to-1000.patch b/target/linux/generic/pending-5.10/840-hwrng-bcm2835-set-quality-to-1000.patch
deleted file mode 100644
index 580f0b1bfaae..000000000000
--- a/target/linux/generic/pending-5.10/840-hwrng-bcm2835-set-quality-to-1000.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From d6988cf1d16faac56899918bb2b1be8d85155e3f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Sat, 20 Feb 2021 18:36:38 +0100
-Subject: [PATCH] hwrng: bcm2835: set quality to 1000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows devices without a high precission timer to reduce boot from >100s
-to <30s.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
----
- drivers/char/hw_random/bcm2835-rng.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/char/hw_random/bcm2835-rng.c
-+++ b/drivers/char/hw_random/bcm2835-rng.c
-@@ -163,6 +163,7 @@ static int bcm2835_rng_probe(struct plat
- 	priv->rng.init = bcm2835_rng_init;
- 	priv->rng.read = bcm2835_rng_read;
- 	priv->rng.cleanup = bcm2835_rng_cleanup;
-+	priv->rng.quality = 1000;
- 
- 	if (dev_of_node(dev)) {
- 		rng_id = of_match_node(bcm2835_rng_of_match, dev->of_node);
diff --git a/target/linux/generic/pending-5.10/842-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch b/target/linux/generic/pending-5.10/842-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch
deleted file mode 100644
index c6f127add160..000000000000
--- a/target/linux/generic/pending-5.10/842-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 078c6a1cbd4cd7496048786beec2e312577bebbf Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Tue, 11 Jan 2022 23:11:32 +0100
-Subject: [PATCH] net: qmi_wwan: add ZTE MF286D modem 19d2:1485
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem.
-
-T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
-D:  Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
-P:  Vendor=19d2 ProdID=1485 Rev=52.87
-S:  Manufacturer=ZTE,Incorporated
-S:  Product=ZTE Technologies MSM
-S:  SerialNumber=MF286DZTED000000
-C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA
-A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
-I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
-E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
-I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
-E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
-E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
-E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
-E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
-E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
-E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
-E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
-E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
-E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-E:  Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
-Acked-by: Bjørn Mork <bjorn@mork.no>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/qmi_wwan.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/usb/qmi_wwan.c
-+++ b/drivers/net/usb/qmi_wwan.c
-@@ -1253,6 +1253,7 @@ static const struct usb_device_id produc
- 	{QMI_FIXED_INTF(0x19d2, 0x1426, 2)},	/* ZTE MF91 */
- 	{QMI_FIXED_INTF(0x19d2, 0x1428, 2)},	/* Telewell TW-LTE 4G v2 */
- 	{QMI_FIXED_INTF(0x19d2, 0x1432, 3)},	/* ZTE ME3620 */
-+	{QMI_FIXED_INTF(0x19d2, 0x1485, 5)},	/* ZTE MF286D */
- 	{QMI_FIXED_INTF(0x19d2, 0x2002, 4)},	/* ZTE (Vodafone) K3765-Z */
- 	{QMI_FIXED_INTF(0x2001, 0x7e16, 3)},	/* D-Link DWM-221 */
- 	{QMI_FIXED_INTF(0x2001, 0x7e19, 4)},	/* D-Link DWM-221 B1 */
diff --git a/target/linux/generic/pending-5.10/850-0001-PCI-aardvark-Replace-custom-PCIE_CORE_INT_-macros-wi.patch b/target/linux/generic/pending-5.10/850-0001-PCI-aardvark-Replace-custom-PCIE_CORE_INT_-macros-wi.patch
deleted file mode 100644
index cae329a582f6..000000000000
--- a/target/linux/generic/pending-5.10/850-0001-PCI-aardvark-Replace-custom-PCIE_CORE_INT_-macros-wi.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 43f3f187e6f62ca40802afe39495c8a3e20b4bfa Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Mon, 10 Jan 2022 01:50:50 +0100
-Subject: [PATCH] PCI: aardvark: Replace custom PCIE_CORE_INT_* macros with
- PCI_INTERRUPT_*
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Header file linux/pci.h defines enum pci_interrupt_pin with corresponding
-PCI_INTERRUPT_* values.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 6 +-----
- 1 file changed, 1 insertion(+), 5 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -37,10 +37,6 @@
- #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN			BIT(6)
- #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHCK			BIT(7)
- #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV			BIT(8)
--#define     PCIE_CORE_INT_A_ASSERT_ENABLE			1
--#define     PCIE_CORE_INT_B_ASSERT_ENABLE			2
--#define     PCIE_CORE_INT_C_ASSERT_ENABLE			3
--#define     PCIE_CORE_INT_D_ASSERT_ENABLE			4
- /* PIO registers base address and register offsets */
- #define PIO_BASE_ADDR				0x4000
- #define PIO_CTRL				(PIO_BASE_ADDR + 0x0)
-@@ -968,7 +964,7 @@ static int advk_sw_pci_bridge_init(struc
- 	bridge->conf.pref_mem_limit = cpu_to_le16(PCI_PREF_RANGE_TYPE_64);
- 
- 	/* Support interrupt A for MSI feature */
--	bridge->conf.intpin = PCIE_CORE_INT_A_ASSERT_ENABLE;
-+	bridge->conf.intpin = PCI_INTERRUPT_INTA;
- 
- 	/* Aardvark HW provides PCIe Capability structure in version 2 */
- 	bridge->pcie_conf.cap = cpu_to_le16(2);
diff --git a/target/linux/generic/pending-5.10/850-0004-PCI-aardvark-Rewrite-IRQ-code-to-chained-IRQ-handler.patch b/target/linux/generic/pending-5.10/850-0004-PCI-aardvark-Rewrite-IRQ-code-to-chained-IRQ-handler.patch
deleted file mode 100644
index 426ba94b9892..000000000000
--- a/target/linux/generic/pending-5.10/850-0004-PCI-aardvark-Rewrite-IRQ-code-to-chained-IRQ-handler.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From 0cd5141d1866afb23286fe90cd846441fe7aeb39 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Sat, 27 Mar 2021 14:44:11 +0100
-Subject: [PATCH] PCI: aardvark: Rewrite IRQ code to chained IRQ handler
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Rewrite the code to use irq_set_chained_handler_and_data() handler with
-chained_irq_enter() and chained_irq_exit() processing instead of using
-devm_request_irq().
-
-advk_pcie_irq_handler() reads IRQ status bits and calls other functions
-based on which bits are set. These functions then read its own IRQ status
-bits and calls other aardvark functions based on these bits. Finally
-generic_handle_domain_irq() with translated linux IRQ numbers are called.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 48 +++++++++++++++------------
- 1 file changed, 26 insertions(+), 22 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -275,6 +275,7 @@ struct advk_pcie {
- 		u32 actions;
- 	} wins[OB_WIN_COUNT];
- 	u8 wins_count;
-+	int irq;
- 	struct irq_domain *irq_domain;
- 	struct irq_chip irq_chip;
- 	raw_spinlock_t irq_lock;
-@@ -1441,21 +1442,26 @@ static void advk_pcie_handle_int(struct
- 	}
- }
- 
--static irqreturn_t advk_pcie_irq_handler(int irq, void *arg)
-+static void advk_pcie_irq_handler(struct irq_desc *desc)
- {
--	struct advk_pcie *pcie = arg;
--	u32 status;
-+	struct advk_pcie *pcie = irq_desc_get_handler_data(desc);
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	u32 val, mask, status;
- 
--	status = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG);
--	if (!(status & PCIE_IRQ_CORE_INT))
--		return IRQ_NONE;
-+	chained_irq_enter(chip, desc);
- 
--	advk_pcie_handle_int(pcie);
-+	val = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG);
-+	mask = advk_readl(pcie, HOST_CTRL_INT_MASK_REG);
-+	status = val & ((~mask) & PCIE_IRQ_ALL_MASK);
- 
--	/* Clear interrupt */
--	advk_writel(pcie, PCIE_IRQ_CORE_INT, HOST_CTRL_INT_STATUS_REG);
-+	if (status & PCIE_IRQ_CORE_INT) {
-+		advk_pcie_handle_int(pcie);
- 
--	return IRQ_HANDLED;
-+		/* Clear interrupt */
-+		advk_writel(pcie, PCIE_IRQ_CORE_INT, HOST_CTRL_INT_STATUS_REG);
-+	}
-+
-+	chained_irq_exit(chip, desc);
- }
- 
- static void __maybe_unused advk_pcie_disable_phy(struct advk_pcie *pcie)
-@@ -1522,7 +1528,7 @@ static int advk_pcie_probe(struct platfo
- 	struct advk_pcie *pcie;
- 	struct pci_host_bridge *bridge;
- 	struct resource_entry *entry;
--	int ret, irq;
-+	int ret;
- 
- 	bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct advk_pcie));
- 	if (!bridge)
-@@ -1610,17 +1616,9 @@ static int advk_pcie_probe(struct platfo
- 	if (IS_ERR(pcie->base))
- 		return PTR_ERR(pcie->base);
- 
--	irq = platform_get_irq(pdev, 0);
--	if (irq < 0)
--		return irq;
--
--	ret = devm_request_irq(dev, irq, advk_pcie_irq_handler,
--			       IRQF_SHARED | IRQF_NO_THREAD, "advk-pcie",
--			       pcie);
--	if (ret) {
--		dev_err(dev, "Failed to register interrupt\n");
--		return ret;
--	}
-+	pcie->irq = platform_get_irq(pdev, 0);
-+	if (pcie->irq < 0)
-+		return pcie->irq;
- 
- 	pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
- 						       "reset-gpios", 0,
-@@ -1669,11 +1667,14 @@ static int advk_pcie_probe(struct platfo
- 		return ret;
- 	}
- 
-+	irq_set_chained_handler_and_data(pcie->irq, advk_pcie_irq_handler, pcie);
-+
- 	bridge->sysdata = pcie;
- 	bridge->ops = &advk_pcie_ops;
- 
- 	ret = pci_host_probe(bridge);
- 	if (ret < 0) {
-+		irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
- 		advk_pcie_remove_msi_irq_domain(pcie);
- 		advk_pcie_remove_irq_domain(pcie);
- 		return ret;
-@@ -1721,6 +1722,9 @@ static int advk_pcie_remove(struct platf
- 	advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG);
- 	advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG);
- 
-+	/* Remove IRQ handler */
-+	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
-+
- 	/* Remove IRQ domains */
- 	advk_pcie_remove_msi_irq_domain(pcie);
- 	advk_pcie_remove_irq_domain(pcie);
diff --git a/target/linux/generic/pending-5.10/850-0005-PCI-aardvark-Check-return-value-of-generic_handle_do.patch b/target/linux/generic/pending-5.10/850-0005-PCI-aardvark-Check-return-value-of-generic_handle_do.patch
deleted file mode 100644
index a9c7f052b18d..000000000000
--- a/target/linux/generic/pending-5.10/850-0005-PCI-aardvark-Check-return-value-of-generic_handle_do.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 69c1f2c6f45a556361fd8e8d2d4eb20e2c8d3d95 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 18 Mar 2021 17:04:32 +0100
-Subject: [PATCH] PCI: aardvark: Check return value of
- generic_handle_domain_irq() when processing INTx IRQ
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It is possible that we receive spurious INTx interrupt. Check for the
-return value of generic_handle_domain_irq() when processing INTx IRQ.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1438,7 +1438,9 @@ static void advk_pcie_handle_int(struct
- 			    PCIE_ISR1_REG);
- 
- 		virq = irq_find_mapping(pcie->irq_domain, i);
--		generic_handle_irq(virq);
-+		if (generic_handle_irq(virq) == -EINVAL)
-+			dev_err_ratelimited(&pcie->pdev->dev, "unexpected INT%c IRQ\n",
-+					    (char)i + 'A');
- 	}
- }
- 
diff --git a/target/linux/generic/pending-5.10/850-0006-PCI-aardvark-Make-MSI-irq_chip-structures-static-dri.patch b/target/linux/generic/pending-5.10/850-0006-PCI-aardvark-Make-MSI-irq_chip-structures-static-dri.patch
deleted file mode 100644
index e7cee0a87ae6..000000000000
--- a/target/linux/generic/pending-5.10/850-0006-PCI-aardvark-Make-MSI-irq_chip-structures-static-dri.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 5eb36a6b9508da442aac80f4df23e3951bbfa7aa Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 10 Jan 2022 00:03:41 +0100
-Subject: [PATCH] PCI: aardvark: Make MSI irq_chip structures static driver
- structures
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Marc Zyngier says [1] that we should use struct irq_chip as a global
-static struct in the driver. Even though the structure currently
-contains a dynamic member (parent_device), Marc says [2] that he plans
-to kill it and make the structure completely static.
-
-Convert Aardvark's priv->msi_bottom_irq_chip and priv->msi_irq_chip to
-static driver structure.
-
-[1] https://lore.kernel.org/linux-pci/877dbcvngf.wl-maz@kernel.org/
-[2] https://lore.kernel.org/linux-pci/874k6gvkhz.wl-maz@kernel.org/
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 26 ++++++++++++--------------
- 1 file changed, 12 insertions(+), 14 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -281,8 +281,6 @@ struct advk_pcie {
- 	raw_spinlock_t irq_lock;
- 	struct irq_domain *msi_domain;
- 	struct irq_domain *msi_inner_domain;
--	struct irq_chip msi_bottom_irq_chip;
--	struct irq_chip msi_irq_chip;
- 	struct msi_domain_info msi_domain_info;
- 	DECLARE_BITMAP(msi_used, MSI_IRQ_NUM);
- 	struct mutex msi_used_lock;
-@@ -1201,6 +1199,12 @@ static int advk_msi_set_affinity(struct
- 	return -EINVAL;
- }
- 
-+static struct irq_chip advk_msi_bottom_irq_chip = {
-+	.name			= "MSI",
-+	.irq_compose_msi_msg	= advk_msi_irq_compose_msi_msg,
-+	.irq_set_affinity	= advk_msi_set_affinity,
-+};
-+
- static int advk_msi_irq_domain_alloc(struct irq_domain *domain,
- 				     unsigned int virq,
- 				     unsigned int nr_irqs, void *args)
-@@ -1217,7 +1221,7 @@ static int advk_msi_irq_domain_alloc(str
- 
- 	for (i = 0; i < nr_irqs; i++)
- 		irq_domain_set_info(domain, virq + i, hwirq + i,
--				    &pcie->msi_bottom_irq_chip,
-+				    &advk_msi_bottom_irq_chip,
- 				    domain->host_data, handle_simple_irq,
- 				    NULL, NULL);
- 
-@@ -1287,29 +1291,23 @@ static const struct irq_domain_ops advk_
- 	.xlate = irq_domain_xlate_onecell,
- };
- 
-+static struct irq_chip advk_msi_irq_chip = {
-+	.name = "advk-MSI",
-+};
-+
- static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
- {
- 	struct device *dev = &pcie->pdev->dev;
- 	struct device_node *node = dev->of_node;
--	struct irq_chip *bottom_ic, *msi_ic;
- 	struct msi_domain_info *msi_di;
- 	phys_addr_t msi_msg_phys;
- 
- 	mutex_init(&pcie->msi_used_lock);
- 
--	bottom_ic = &pcie->msi_bottom_irq_chip;
--
--	bottom_ic->name = "MSI";
--	bottom_ic->irq_compose_msi_msg = advk_msi_irq_compose_msi_msg;
--	bottom_ic->irq_set_affinity = advk_msi_set_affinity;
--
--	msi_ic = &pcie->msi_irq_chip;
--	msi_ic->name = "advk-MSI";
--
- 	msi_di = &pcie->msi_domain_info;
- 	msi_di->flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
- 		MSI_FLAG_MULTI_PCI_MSI;
--	msi_di->chip = msi_ic;
-+	msi_di->chip = &advk_msi_irq_chip;
- 
- 	msi_msg_phys = virt_to_phys(&pcie->msi_msg);
- 
diff --git a/target/linux/generic/pending-5.10/850-0007-PCI-aardvark-Make-msi_domain_info-structure-a-static.patch b/target/linux/generic/pending-5.10/850-0007-PCI-aardvark-Make-msi_domain_info-structure-a-static.patch
deleted file mode 100644
index beadf122346d..000000000000
--- a/target/linux/generic/pending-5.10/850-0007-PCI-aardvark-Make-msi_domain_info-structure-a-static.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From c092ab8994f1f777054c0179a9deb40b87ee606f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 10 Jan 2022 00:10:46 +0100
-Subject: [PATCH] PCI: aardvark: Make msi_domain_info structure a static driver
- structure
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Make Aardvark's msi_domain_info structure into a private driver structure.
-Domain info is same for every potential instatination of a controller.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -281,7 +281,6 @@ struct advk_pcie {
- 	raw_spinlock_t irq_lock;
- 	struct irq_domain *msi_domain;
- 	struct irq_domain *msi_inner_domain;
--	struct msi_domain_info msi_domain_info;
- 	DECLARE_BITMAP(msi_used, MSI_IRQ_NUM);
- 	struct mutex msi_used_lock;
- 	u16 msi_msg;
-@@ -1295,20 +1294,20 @@ static struct irq_chip advk_msi_irq_chip
- 	.name = "advk-MSI",
- };
- 
-+static struct msi_domain_info advk_msi_domain_info = {
-+	.flags	= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-+		  MSI_FLAG_MULTI_PCI_MSI,
-+	.chip	= &advk_msi_irq_chip,
-+};
-+
- static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
- {
- 	struct device *dev = &pcie->pdev->dev;
- 	struct device_node *node = dev->of_node;
--	struct msi_domain_info *msi_di;
- 	phys_addr_t msi_msg_phys;
- 
- 	mutex_init(&pcie->msi_used_lock);
- 
--	msi_di = &pcie->msi_domain_info;
--	msi_di->flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
--		MSI_FLAG_MULTI_PCI_MSI;
--	msi_di->chip = &advk_msi_irq_chip;
--
- 	msi_msg_phys = virt_to_phys(&pcie->msi_msg);
- 
- 	advk_writel(pcie, lower_32_bits(msi_msg_phys),
-@@ -1324,7 +1323,8 @@ static int advk_pcie_init_msi_irq_domain
- 
- 	pcie->msi_domain =
- 		pci_msi_create_irq_domain(of_node_to_fwnode(node),
--					  msi_di, pcie->msi_inner_domain);
-+					  &advk_msi_domain_info,
-+					  pcie->msi_inner_domain);
- 	if (!pcie->msi_domain) {
- 		irq_domain_remove(pcie->msi_inner_domain);
- 		return -ENOMEM;
diff --git a/target/linux/generic/pending-5.10/850-0008-PCI-aardvark-Use-dev_fwnode-instead-of-of_node_to_fw.patch b/target/linux/generic/pending-5.10/850-0008-PCI-aardvark-Use-dev_fwnode-instead-of-of_node_to_fw.patch
deleted file mode 100644
index a40d3f0d8e93..000000000000
--- a/target/linux/generic/pending-5.10/850-0008-PCI-aardvark-Use-dev_fwnode-instead-of-of_node_to_fw.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 59029739d42b439628e2f64f3d8f2db9be97deff Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 10 Jan 2022 00:15:17 +0100
-Subject: [PATCH] PCI: aardvark: Use dev_fwnode() instead of
- of_node_to_fwnode(dev->of_node)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use simple
-  dev_fwnode(dev)
-instead of
-  struct device_node *node = dev->of_node;
-  of_node_to_fwnode(node)
-especially since the node variable is not used elsewhere in the function.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1303,7 +1303,6 @@ static struct msi_domain_info advk_msi_d
- static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
- {
- 	struct device *dev = &pcie->pdev->dev;
--	struct device_node *node = dev->of_node;
- 	phys_addr_t msi_msg_phys;
- 
- 	mutex_init(&pcie->msi_used_lock);
-@@ -1322,7 +1321,7 @@ static int advk_pcie_init_msi_irq_domain
- 		return -ENOMEM;
- 
- 	pcie->msi_domain =
--		pci_msi_create_irq_domain(of_node_to_fwnode(node),
-+		pci_msi_create_irq_domain(dev_fwnode(dev),
- 					  &advk_msi_domain_info,
- 					  pcie->msi_inner_domain);
- 	if (!pcie->msi_domain) {
diff --git a/target/linux/generic/pending-5.10/850-0009-PCI-aardvark-Refactor-unmasking-summary-MSI-interrup.patch b/target/linux/generic/pending-5.10/850-0009-PCI-aardvark-Refactor-unmasking-summary-MSI-interrup.patch
deleted file mode 100644
index 6cdaddc51c5b..000000000000
--- a/target/linux/generic/pending-5.10/850-0009-PCI-aardvark-Refactor-unmasking-summary-MSI-interrup.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 98feaf97bc64fc640a6c5b1394cd18fc7cd7dac8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Sun, 28 Mar 2021 14:34:49 +0200
-Subject: [PATCH] PCI: aardvark: Refactor unmasking summary MSI interrupt
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Refactor the masking of ISR0/1 Sources and unmasking of summary MSI interrupt
-so that it corresponds to the comments:
-- first mask all ISR0/1
-- then unmask all MSIs
-- then unmask summary MSI interrupt
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 10 ++++++----
- 1 file changed, 6 insertions(+), 4 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -578,15 +578,17 @@ static void advk_pcie_setup_hw(struct ad
- 	advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG);
- 
- 	/* Disable All ISR0/1 Sources */
--	reg = PCIE_ISR0_ALL_MASK;
--	reg &= ~PCIE_ISR0_MSI_INT_PENDING;
--	advk_writel(pcie, reg, PCIE_ISR0_MASK_REG);
--
-+	advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_MASK_REG);
- 	advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG);
- 
- 	/* Unmask all MSIs */
- 	advk_writel(pcie, ~(u32)PCIE_MSI_ALL_MASK, PCIE_MSI_MASK_REG);
- 
-+	/* Unmask summary MSI interrupt */
-+	reg = advk_readl(pcie, PCIE_ISR0_MASK_REG);
-+	reg &= ~PCIE_ISR0_MSI_INT_PENDING;
-+	advk_writel(pcie, reg, PCIE_ISR0_MASK_REG);
-+
- 	/* Enable summary interrupt for GIC SPI source */
- 	reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK);
- 	advk_writel(pcie, reg, HOST_CTRL_INT_MASK_REG);
diff --git a/target/linux/generic/pending-5.10/850-0010-PCI-aardvark-Add-support-for-masking-MSI-interrupts.patch b/target/linux/generic/pending-5.10/850-0010-PCI-aardvark-Add-support-for-masking-MSI-interrupts.patch
deleted file mode 100644
index 10ac58bd284e..000000000000
--- a/target/linux/generic/pending-5.10/850-0010-PCI-aardvark-Add-support-for-masking-MSI-interrupts.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From 7f353accca6e4a3222991c65b1a6801503973bd3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Fri, 2 Jul 2021 16:44:10 +0200
-Subject: [PATCH] PCI: aardvark: Add support for masking MSI interrupts
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-We should not unmask MSIs at setup, but only when kernel asks for them
-to be unmasked.
-
-At setup, mask all MSIs, and implement IRQ chip callbacks for masking
-and unmasking particular MSIs.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 54 ++++++++++++++++++++++++---
- 1 file changed, 49 insertions(+), 5 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -281,6 +281,7 @@ struct advk_pcie {
- 	raw_spinlock_t irq_lock;
- 	struct irq_domain *msi_domain;
- 	struct irq_domain *msi_inner_domain;
-+	raw_spinlock_t msi_irq_lock;
- 	DECLARE_BITMAP(msi_used, MSI_IRQ_NUM);
- 	struct mutex msi_used_lock;
- 	u16 msi_msg;
-@@ -577,12 +578,10 @@ static void advk_pcie_setup_hw(struct ad
- 	advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG);
- 	advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG);
- 
--	/* Disable All ISR0/1 Sources */
-+	/* Disable All ISR0/1 and MSI Sources */
- 	advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_MASK_REG);
- 	advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG);
--
--	/* Unmask all MSIs */
--	advk_writel(pcie, ~(u32)PCIE_MSI_ALL_MASK, PCIE_MSI_MASK_REG);
-+	advk_writel(pcie, PCIE_MSI_ALL_MASK, PCIE_MSI_MASK_REG);
- 
- 	/* Unmask summary MSI interrupt */
- 	reg = advk_readl(pcie, PCIE_ISR0_MASK_REG);
-@@ -1200,10 +1199,52 @@ static int advk_msi_set_affinity(struct
- 	return -EINVAL;
- }
- 
-+static void advk_msi_irq_mask(struct irq_data *d)
-+{
-+	struct advk_pcie *pcie = d->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
-+	unsigned long flags;
-+	u32 mask;
-+
-+	raw_spin_lock_irqsave(&pcie->msi_irq_lock, flags);
-+	mask = advk_readl(pcie, PCIE_MSI_MASK_REG);
-+	mask |= BIT(hwirq);
-+	advk_writel(pcie, mask, PCIE_MSI_MASK_REG);
-+	raw_spin_unlock_irqrestore(&pcie->msi_irq_lock, flags);
-+}
-+
-+static void advk_msi_irq_unmask(struct irq_data *d)
-+{
-+	struct advk_pcie *pcie = d->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
-+	unsigned long flags;
-+	u32 mask;
-+
-+	raw_spin_lock_irqsave(&pcie->msi_irq_lock, flags);
-+	mask = advk_readl(pcie, PCIE_MSI_MASK_REG);
-+	mask &= ~BIT(hwirq);
-+	advk_writel(pcie, mask, PCIE_MSI_MASK_REG);
-+	raw_spin_unlock_irqrestore(&pcie->msi_irq_lock, flags);
-+}
-+
-+static void advk_msi_top_irq_mask(struct irq_data *d)
-+{
-+	pci_msi_mask_irq(d);
-+	irq_chip_mask_parent(d);
-+}
-+
-+static void advk_msi_top_irq_unmask(struct irq_data *d)
-+{
-+	pci_msi_unmask_irq(d);
-+	irq_chip_unmask_parent(d);
-+}
-+
- static struct irq_chip advk_msi_bottom_irq_chip = {
- 	.name			= "MSI",
- 	.irq_compose_msi_msg	= advk_msi_irq_compose_msi_msg,
- 	.irq_set_affinity	= advk_msi_set_affinity,
-+	.irq_mask		= advk_msi_irq_mask,
-+	.irq_unmask		= advk_msi_irq_unmask,
- };
- 
- static int advk_msi_irq_domain_alloc(struct irq_domain *domain,
-@@ -1293,7 +1334,9 @@ static const struct irq_domain_ops advk_
- };
- 
- static struct irq_chip advk_msi_irq_chip = {
--	.name = "advk-MSI",
-+	.name		= "advk-MSI",
-+	.irq_mask	= advk_msi_top_irq_mask,
-+	.irq_unmask	= advk_msi_top_irq_unmask,
- };
- 
- static struct msi_domain_info advk_msi_domain_info = {
-@@ -1307,6 +1350,7 @@ static int advk_pcie_init_msi_irq_domain
- 	struct device *dev = &pcie->pdev->dev;
- 	phys_addr_t msi_msg_phys;
- 
-+	raw_spin_lock_init(&pcie->msi_irq_lock);
- 	mutex_init(&pcie->msi_used_lock);
- 
- 	msi_msg_phys = virt_to_phys(&pcie->msi_msg);
diff --git a/target/linux/generic/pending-5.10/850-0011-PCI-aardvark-Fix-setting-MSI-address.patch b/target/linux/generic/pending-5.10/850-0011-PCI-aardvark-Fix-setting-MSI-address.patch
deleted file mode 100644
index 587e78111a18..000000000000
--- a/target/linux/generic/pending-5.10/850-0011-PCI-aardvark-Fix-setting-MSI-address.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From fa73c200f181436eab859374657c53a73778d8ad Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Fri, 26 Mar 2021 17:35:44 +0100
-Subject: [PATCH] PCI: aardvark: Fix setting MSI address
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-MSI address for receiving MSI interrupts needs to be correctly set before
-enabling processing of MSI interrupts.
-
-Move code for setting PCIE_MSI_ADDR_LOW_REG and PCIE_MSI_ADDR_HIGH_REG
-from advk_pcie_init_msi_irq_domain() to advk_pcie_setup_hw(), before
-enabling PCIE_CORE_CTRL2_MSI_ENABLE.
-
-After this we can remove the now unused member msi_msg, which was used
-only for MSI doorbell address. MSI address can be any address which cannot
-be used to DMA to. So change it to the address of the main struct advk_pcie.
-
-Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Acked-by: Marc Zyngier <maz@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Cc: stable@vger.kernel.org # f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support")
----
- drivers/pci/controller/pci-aardvark.c | 21 +++++++++------------
- 1 file changed, 9 insertions(+), 12 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -284,7 +284,6 @@ struct advk_pcie {
- 	raw_spinlock_t msi_irq_lock;
- 	DECLARE_BITMAP(msi_used, MSI_IRQ_NUM);
- 	struct mutex msi_used_lock;
--	u16 msi_msg;
- 	int link_gen;
- 	struct pci_bridge_emul bridge;
- 	struct gpio_desc *reset_gpio;
-@@ -479,6 +478,7 @@ static void advk_pcie_disable_ob_win(str
- 
- static void advk_pcie_setup_hw(struct advk_pcie *pcie)
- {
-+	phys_addr_t msi_addr;
- 	u32 reg;
- 	int i;
- 
-@@ -567,6 +567,11 @@ static void advk_pcie_setup_hw(struct ad
- 	reg |= LANE_COUNT_1;
- 	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
- 
-+	/* Set MSI address */
-+	msi_addr = virt_to_phys(pcie);
-+	advk_writel(pcie, lower_32_bits(msi_addr), PCIE_MSI_ADDR_LOW_REG);
-+	advk_writel(pcie, upper_32_bits(msi_addr), PCIE_MSI_ADDR_HIGH_REG);
-+
- 	/* Enable MSI */
- 	reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
- 	reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
-@@ -1186,10 +1191,10 @@ static void advk_msi_irq_compose_msi_msg
- 					 struct msi_msg *msg)
- {
- 	struct advk_pcie *pcie = irq_data_get_irq_chip_data(data);
--	phys_addr_t msi_msg = virt_to_phys(&pcie->msi_msg);
-+	phys_addr_t msi_addr = virt_to_phys(pcie);
- 
--	msg->address_lo = lower_32_bits(msi_msg);
--	msg->address_hi = upper_32_bits(msi_msg);
-+	msg->address_lo = lower_32_bits(msi_addr);
-+	msg->address_hi = upper_32_bits(msi_addr);
- 	msg->data = data->hwirq;
- }
- 
-@@ -1348,18 +1353,10 @@ static struct msi_domain_info advk_msi_d
- static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
- {
- 	struct device *dev = &pcie->pdev->dev;
--	phys_addr_t msi_msg_phys;
- 
- 	raw_spin_lock_init(&pcie->msi_irq_lock);
- 	mutex_init(&pcie->msi_used_lock);
- 
--	msi_msg_phys = virt_to_phys(&pcie->msi_msg);
--
--	advk_writel(pcie, lower_32_bits(msi_msg_phys),
--		    PCIE_MSI_ADDR_LOW_REG);
--	advk_writel(pcie, upper_32_bits(msi_msg_phys),
--		    PCIE_MSI_ADDR_HIGH_REG);
--
- 	pcie->msi_inner_domain =
- 		irq_domain_add_linear(NULL, MSI_IRQ_NUM,
- 				      &advk_msi_domain_ops, pcie);
diff --git a/target/linux/generic/pending-5.10/850-0012-PCI-aardvark-Enable-MSI-X-support.patch b/target/linux/generic/pending-5.10/850-0012-PCI-aardvark-Enable-MSI-X-support.patch
deleted file mode 100644
index 2e681cdffc8e..000000000000
--- a/target/linux/generic/pending-5.10/850-0012-PCI-aardvark-Enable-MSI-X-support.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 735a4ac9782b96fbe1543c578aa8334364f21abd Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Fri, 2 Apr 2021 14:05:24 +0200
-Subject: [PATCH] PCI: aardvark: Enable MSI-X support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-According to PCI 3.0 specification, sending both MSI and MSI-X interrupts
-is done by DWORD memory write operation to doorbell message address. The
-write operation for MSI has zero upper 16 bits and the MSI interrupt number
-in the lower 16 bits, while the write operation for MSI-X contains a 32-bit
-value from MSI-X table.
-
-Since the driver only uses interrupt numbers from range 0..31, the upper
-16 bits of the DWORD memory write operation to doorbell message address
-are zero even for MSI-X interrupts. Thus we can enable MSI-X interrupts.
-
-Testing proves that kernel can correctly receive MSI-X interrupts from PCIe
-cards which supports both MSI and MSI-X interrupts.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1346,7 +1346,7 @@ static struct irq_chip advk_msi_irq_chip
- 
- static struct msi_domain_info advk_msi_domain_info = {
- 	.flags	= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
--		  MSI_FLAG_MULTI_PCI_MSI,
-+		  MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX,
- 	.chip	= &advk_msi_irq_chip,
- };
- 
diff --git a/target/linux/generic/pending-5.10/850-0013-PCI-aardvark-Add-support-for-ERR-interrupt-on-emulat.patch b/target/linux/generic/pending-5.10/850-0013-PCI-aardvark-Add-support-for-ERR-interrupt-on-emulat.patch
deleted file mode 100644
index 866543196187..000000000000
--- a/target/linux/generic/pending-5.10/850-0013-PCI-aardvark-Add-support-for-ERR-interrupt-on-emulat.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 7f3e55a3890fa26d15e2e4e90213962d1a7f6df9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Fri, 12 Feb 2021 20:32:55 +0100
-Subject: [PATCH] PCI: aardvark: Add support for ERR interrupt on emulated
- bridge
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-ERR interrupt is triggered when corresponding bit is unmasked in both ISR0
-and PCI_EXP_DEVCTL registers. Unmasking ERR bits in PCI_EXP_DEVCTL register
-is not enough. This means that currently the ERR interrupt is never
-triggered.
-
-Unmask ERR bits in ISR0 register at driver probe time. ERR interrupt is not
-triggered until ERR bits are unmasked also in PCI_EXP_DEVCTL register,
-which is done by AER driver. So it is safe to unconditionally unmask all
-ERR bits in aardvark probe.
-
-Aardvark HW sets PCI_ERR_ROOT_AER_IRQ to zero and when corresponding bits
-in ISR0 and PCI_EXP_DEVCTL are enabled, the HW triggers a generic interrupt
-on GIC. Chain this interrupt to PCIe interrupt 0 with
-generic_handle_domain_irq() to allow processing of ERR interrupts.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 36 ++++++++++++++++++++++++++-
- 1 file changed, 35 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -97,6 +97,10 @@
- #define PCIE_MSG_PM_PME_MASK			BIT(7)
- #define PCIE_ISR0_MASK_REG			(CONTROL_BASE_ADDR + 0x44)
- #define     PCIE_ISR0_MSI_INT_PENDING		BIT(24)
-+#define     PCIE_ISR0_CORR_ERR			BIT(11)
-+#define     PCIE_ISR0_NFAT_ERR			BIT(12)
-+#define     PCIE_ISR0_FAT_ERR			BIT(13)
-+#define     PCIE_ISR0_ERR_MASK			GENMASK(13, 11)
- #define     PCIE_ISR0_INTX_ASSERT(val)		BIT(16 + (val))
- #define     PCIE_ISR0_INTX_DEASSERT(val)	BIT(20 + (val))
- #define     PCIE_ISR0_ALL_MASK			GENMASK(31, 0)
-@@ -785,11 +789,15 @@ advk_pci_bridge_emul_base_conf_read(stru
- 	case PCI_INTERRUPT_LINE: {
- 		/*
- 		 * From the whole 32bit register we support reading from HW only
--		 * one bit: PCI_BRIDGE_CTL_BUS_RESET.
-+		 * two bits: PCI_BRIDGE_CTL_BUS_RESET and PCI_BRIDGE_CTL_SERR.
- 		 * Other bits are retrieved only from emulated config buffer.
- 		 */
- 		__le32 *cfgspace = (__le32 *)&bridge->conf;
- 		u32 val = le32_to_cpu(cfgspace[PCI_INTERRUPT_LINE / 4]);
-+		if (advk_readl(pcie, PCIE_ISR0_MASK_REG) & PCIE_ISR0_ERR_MASK)
-+			val &= ~(PCI_BRIDGE_CTL_SERR << 16);
-+		else
-+			val |= PCI_BRIDGE_CTL_SERR << 16;
- 		if (advk_readl(pcie, PCIE_CORE_CTRL1_REG) & HOT_RESET_GEN)
- 			val |= PCI_BRIDGE_CTL_BUS_RESET << 16;
- 		else
-@@ -815,6 +823,19 @@ advk_pci_bridge_emul_base_conf_write(str
- 		break;
- 
- 	case PCI_INTERRUPT_LINE:
-+		/*
-+		 * According to Figure 6-3: Pseudo Logic Diagram for Error
-+		 * Message Controls in PCIe base specification, SERR# Enable bit
-+		 * in Bridge Control register enable receiving of ERR_* messages
-+		 */
-+		if (mask & (PCI_BRIDGE_CTL_SERR << 16)) {
-+			u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG);
-+			if (new & (PCI_BRIDGE_CTL_SERR << 16))
-+				val &= ~PCIE_ISR0_ERR_MASK;
-+			else
-+				val |= PCIE_ISR0_ERR_MASK;
-+			advk_writel(pcie, val, PCIE_ISR0_MASK_REG);
-+		}
- 		if (mask & (PCI_BRIDGE_CTL_BUS_RESET << 16)) {
- 			u32 val = advk_readl(pcie, PCIE_CORE_CTRL1_REG);
- 			if (new & (PCI_BRIDGE_CTL_BUS_RESET << 16))
-@@ -1465,6 +1486,19 @@ static void advk_pcie_handle_int(struct
- 	isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
- 	isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
- 
-+	/* Process ERR interrupt */
-+	if (isr0_status & PCIE_ISR0_ERR_MASK) {
-+		advk_writel(pcie, PCIE_ISR0_ERR_MASK, PCIE_ISR0_REG);
-+
-+		/*
-+		 * Aardvark HW returns zero for PCI_ERR_ROOT_AER_IRQ, so use
-+		 * PCIe interrupt 0
-+		 */
-+		virq = irq_find_mapping(pcie->irq_domain, 0);
-+		if (generic_handle_irq(virq) == -EINVAL)
-+			dev_err_ratelimited(&pcie->pdev->dev, "unhandled ERR IRQ\n");
-+	}
-+
- 	/* Process MSI interrupts */
- 	if (isr0_status & PCIE_ISR0_MSI_INT_PENDING)
- 		advk_pcie_handle_msi(pcie);
diff --git a/target/linux/generic/pending-5.10/850-0015-PCI-aardvark-Optimize-writing-PCI_EXP_RTCTL_PMEIE-an.patch b/target/linux/generic/pending-5.10/850-0015-PCI-aardvark-Optimize-writing-PCI_EXP_RTCTL_PMEIE-an.patch
deleted file mode 100644
index 5ed809def248..000000000000
--- a/target/linux/generic/pending-5.10/850-0015-PCI-aardvark-Optimize-writing-PCI_EXP_RTCTL_PMEIE-an.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 3fe0073d116d9902df08761c1cf0d733dd4c38fc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Wed, 8 Dec 2021 06:03:50 +0100
-Subject: [PATCH] PCI: aardvark: Optimize writing PCI_EXP_RTCTL_PMEIE and
- PCI_EXP_RTSTA_PME on emulated bridge
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-To optimize advk_pci_bridge_emul_pcie_conf_write() code, touch
-PCIE_ISR0_REG and PCIE_ISR0_MASK_REG registers only when it is really
-needed, when processing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME bits.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 20 +++++++++++---------
- 1 file changed, 11 insertions(+), 9 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -932,19 +932,21 @@ advk_pci_bridge_emul_pcie_conf_write(str
- 			advk_pcie_wait_for_retrain(pcie);
- 		break;
- 
--	case PCI_EXP_RTCTL: {
-+	case PCI_EXP_RTCTL:
- 		/* Only mask/unmask PME interrupt */
--		u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG) &
--			~PCIE_MSG_PM_PME_MASK;
--		if ((new & PCI_EXP_RTCTL_PMEIE) == 0)
--			val |= PCIE_MSG_PM_PME_MASK;
--		advk_writel(pcie, val, PCIE_ISR0_MASK_REG);
-+		if (mask & PCI_EXP_RTCTL_PMEIE) {
-+			u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG);
-+			if (new & PCI_EXP_RTCTL_PMEIE)
-+				val &= ~PCIE_MSG_PM_PME_MASK;
-+			else
-+				val |= PCIE_MSG_PM_PME_MASK;
-+			advk_writel(pcie, val, PCIE_ISR0_MASK_REG);
-+		}
- 		break;
--	}
- 
- 	case PCI_EXP_RTSTA:
--		new = (new & PCI_EXP_RTSTA_PME) >> 9;
--		advk_writel(pcie, new, PCIE_ISR0_REG);
-+		if (new & PCI_EXP_RTSTA_PME)
-+			advk_writel(pcie, PCIE_MSG_PM_PME_MASK, PCIE_ISR0_REG);
- 		break;
- 
- 	case PCI_EXP_DEVCTL:
diff --git a/target/linux/generic/pending-5.10/850-0016-PCI-aardvark-Add-support-for-PME-interrupts.patch b/target/linux/generic/pending-5.10/850-0016-PCI-aardvark-Add-support-for-PME-interrupts.patch
deleted file mode 100644
index 2b1a945b623f..000000000000
--- a/target/linux/generic/pending-5.10/850-0016-PCI-aardvark-Add-support-for-PME-interrupts.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 7acd8ef92e8789e10b5d736d73cea3b625087f26 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Wed, 8 Dec 2021 06:07:44 +0100
-Subject: [PATCH] PCI: aardvark: Add support for PME interrupts
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Currently enabling PCI_EXP_RTSTA_PME bit in PCI_EXP_RTCTL register does
-nothing. This is because PCIe PME driver expects to receive PCIe interrupt
-defined in PCI_EXP_FLAGS_IRQ register, but aardvark hardware does not
-trigger PCIe INTx/MSI interrupt for PME event, rather it triggers custom
-aardvark interrupt which this driver is not processing yet.
-
-Fix this issue by handling PME interrupt in advk_pcie_handle_int() and
-chaining it to PCIe interrupt 0 with generic_handle_domain_irq() (since
-aardvark sets PCI_EXP_FLAGS_IRQ to zero). With this change PCIe PME driver
-finally starts receiving PME interrupt.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1488,6 +1488,19 @@ static void advk_pcie_handle_int(struct
- 	isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
- 	isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
- 
-+	/* Process PME interrupt */
-+	if (isr0_status & PCIE_MSG_PM_PME_MASK) {
-+		/*
-+		 * Do not clear PME interrupt bit in ISR0, it is cleared by IRQ
-+		 * receiver by writing to the PCI_EXP_RTSTA register of emulated
-+		 * root bridge. Aardvark HW returns zero for PCI_EXP_FLAGS_IRQ,
-+		 * so use PCIe interrupt 0.
-+		 */
-+		virq = irq_find_mapping(pcie->irq_domain, 0);
-+		if (generic_handle_irq(virq) == -EINVAL)
-+			dev_err_ratelimited(&pcie->pdev->dev, "unhandled PME IRQ\n");
-+	}
-+
- 	/* Process ERR interrupt */
- 	if (isr0_status & PCIE_ISR0_ERR_MASK) {
- 		advk_writel(pcie, PCIE_ISR0_ERR_MASK, PCIE_ISR0_REG);
diff --git a/target/linux/generic/pending-5.10/850-0017-PCI-aardvark-Fix-support-for-PME-requester-on-emulat.patch b/target/linux/generic/pending-5.10/850-0017-PCI-aardvark-Fix-support-for-PME-requester-on-emulat.patch
deleted file mode 100644
index a59ff36b513e..000000000000
--- a/target/linux/generic/pending-5.10/850-0017-PCI-aardvark-Fix-support-for-PME-requester-on-emulat.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-From 68727b545332327b4c2f9c0f8d006be8970e7832 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Fri, 19 Feb 2021 14:22:22 +0100
-Subject: [PATCH] PCI: aardvark: Fix support for PME requester on emulated
- bridge
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Enable aardvark PME interrupt unconditionally by unmasking it and read PME
-requester ID to emulated bridge config space immediately after receiving
-interrupt.
-
-PME requester ID is stored in the PCIE_MSG_LOG_REG register, which contains
-the last inbound message. So when new inbound message is received by HW
-(including non-PM), the content in PCIE_MSG_LOG_REG register is replaced by
-a new value.
-
-PCIe specification mandates that subsequent PMEs are kept pending until the
-PME Status Register bit is cleared by software by writing a 1b.
-
-Support for masking/unmasking PME interrupt on emulated bridge via
-PCI_EXP_RTCTL_PMEIE bit is now implemented only in emulated bridge config
-space, to ensure that we do not miss any aardvark PME interrupt.
-
-Reading of PCI_EXP_RTCAP and PCI_EXP_RTSTA registers is simplified as final
-value is now always stored into emulated bridge config space by the
-interrupt handler, so there is no need to implement support for these
-registers in read_pcie callback.
-
-Clearing of W1C bit PCI_EXP_RTSTA_PME is now also simplified as it is done
-by pci-bridge-emul.c code for emulated bridge config space. So there is no
-need to implement support for clearing this bit in write_pcie callback.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 94 +++++++++++++++------------
- 1 file changed, 52 insertions(+), 42 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -597,6 +597,11 @@ static void advk_pcie_setup_hw(struct ad
- 	reg &= ~PCIE_ISR0_MSI_INT_PENDING;
- 	advk_writel(pcie, reg, PCIE_ISR0_MASK_REG);
- 
-+	/* Unmask PME interrupt for processing of PME requester */
-+	reg = advk_readl(pcie, PCIE_ISR0_MASK_REG);
-+	reg &= ~PCIE_MSG_PM_PME_MASK;
-+	advk_writel(pcie, reg, PCIE_ISR0_MASK_REG);
-+
- 	/* Enable summary interrupt for GIC SPI source */
- 	reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK);
- 	advk_writel(pcie, reg, HOST_CTRL_INT_MASK_REG);
-@@ -863,22 +868,11 @@ advk_pci_bridge_emul_pcie_conf_read(stru
- 		*value = PCI_EXP_SLTSTA_PDS << 16;
- 		return PCI_BRIDGE_EMUL_HANDLED;
- 
--	case PCI_EXP_RTCTL: {
--		u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG);
--		*value = (val & PCIE_MSG_PM_PME_MASK) ? 0 : PCI_EXP_RTCTL_PMEIE;
--		*value |= le16_to_cpu(bridge->pcie_conf.rootctl) & PCI_EXP_RTCTL_CRSSVE;
--		*value |= PCI_EXP_RTCAP_CRSVIS << 16;
--		return PCI_BRIDGE_EMUL_HANDLED;
--	}
--
--	case PCI_EXP_RTSTA: {
--		u32 isr0 = advk_readl(pcie, PCIE_ISR0_REG);
--		u32 msglog = advk_readl(pcie, PCIE_MSG_LOG_REG);
--		*value = msglog >> 16;
--		if (isr0 & PCIE_MSG_PM_PME_MASK)
--			*value |= PCI_EXP_RTSTA_PME;
--		return PCI_BRIDGE_EMUL_HANDLED;
--	}
-+	/*
-+	 * PCI_EXP_RTCTL and PCI_EXP_RTSTA are also supported, but do not need
-+	 * to be handled here, because their values are stored in emulated
-+	 * config space buffer, and we read them from there when needed.
-+	 */
- 
- 	case PCI_EXP_LNKCAP: {
- 		u32 val = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
-@@ -932,22 +926,19 @@ advk_pci_bridge_emul_pcie_conf_write(str
- 			advk_pcie_wait_for_retrain(pcie);
- 		break;
- 
--	case PCI_EXP_RTCTL:
--		/* Only mask/unmask PME interrupt */
--		if (mask & PCI_EXP_RTCTL_PMEIE) {
--			u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG);
--			if (new & PCI_EXP_RTCTL_PMEIE)
--				val &= ~PCIE_MSG_PM_PME_MASK;
--			else
--				val |= PCIE_MSG_PM_PME_MASK;
--			advk_writel(pcie, val, PCIE_ISR0_MASK_REG);
--		}
-+	case PCI_EXP_RTCTL: {
-+		u16 rootctl = le16_to_cpu(bridge->pcie_conf.rootctl);
-+		/* Only emulation of PMEIE and CRSSVE bits is provided */
-+		rootctl &= PCI_EXP_RTCTL_PMEIE | PCI_EXP_RTCTL_CRSSVE;
-+		bridge->pcie_conf.rootctl = cpu_to_le16(rootctl);
- 		break;
-+	}
- 
--	case PCI_EXP_RTSTA:
--		if (new & PCI_EXP_RTSTA_PME)
--			advk_writel(pcie, PCIE_MSG_PM_PME_MASK, PCIE_ISR0_REG);
--		break;
-+	/*
-+	 * PCI_EXP_RTSTA is also supported, but does not need to be handled
-+	 * here, because its value is stored in emulated config space buffer,
-+	 * and we write it there when needed.
-+	 */
- 
- 	case PCI_EXP_DEVCTL:
- 	case PCI_EXP_DEVCTL2:
-@@ -1452,6 +1443,34 @@ static void advk_pcie_remove_irq_domain(
- 	irq_domain_remove(pcie->irq_domain);
- }
- 
-+static void advk_pcie_handle_pme(struct advk_pcie *pcie)
-+{
-+	u32 requester = advk_readl(pcie, PCIE_MSG_LOG_REG) >> 16;
-+	int virq;
-+
-+	advk_writel(pcie, PCIE_MSG_PM_PME_MASK, PCIE_ISR0_REG);
-+
-+	/*
-+	 * PCIE_MSG_LOG_REG contains the last inbound message, so store
-+	 * the requester ID only when PME was not asserted yet.
-+	 * Also do not trigger PME interrupt when PME is still asserted.
-+	 */
-+	if (!(le32_to_cpu(pcie->bridge.pcie_conf.rootsta) & PCI_EXP_RTSTA_PME)) {
-+		pcie->bridge.pcie_conf.rootsta = cpu_to_le32(requester | PCI_EXP_RTSTA_PME);
-+
-+		/*
-+		 * Trigger PME interrupt only if PMEIE bit in Root Control is set.
-+		 * Aardvark HW returns zero for PCI_EXP_FLAGS_IRQ, so use PCIe interrupt 0.
-+		 */
-+		if (!(le16_to_cpu(pcie->bridge.pcie_conf.rootctl) & PCI_EXP_RTCTL_PMEIE))
-+			return;
-+
-+		virq = irq_find_mapping(pcie->irq_domain, 0);
-+		if (generic_handle_irq(virq) == -EINVAL)
-+			dev_err_ratelimited(&pcie->pdev->dev, "unhandled PME IRQ\n");
-+	}
-+}
-+
- static void advk_pcie_handle_msi(struct advk_pcie *pcie)
- {
- 	u32 msi_val, msi_mask, msi_status, msi_idx;
-@@ -1488,18 +1507,9 @@ static void advk_pcie_handle_int(struct
- 	isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
- 	isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
- 
--	/* Process PME interrupt */
--	if (isr0_status & PCIE_MSG_PM_PME_MASK) {
--		/*
--		 * Do not clear PME interrupt bit in ISR0, it is cleared by IRQ
--		 * receiver by writing to the PCI_EXP_RTSTA register of emulated
--		 * root bridge. Aardvark HW returns zero for PCI_EXP_FLAGS_IRQ,
--		 * so use PCIe interrupt 0.
--		 */
--		virq = irq_find_mapping(pcie->irq_domain, 0);
--		if (generic_handle_irq(virq) == -EINVAL)
--			dev_err_ratelimited(&pcie->pdev->dev, "unhandled PME IRQ\n");
--	}
-+	/* Process PME interrupt as the first one to do not miss PME requester id */
-+	if (isr0_status & PCIE_MSG_PM_PME_MASK)
-+		advk_pcie_handle_pme(pcie);
- 
- 	/* Process ERR interrupt */
- 	if (isr0_status & PCIE_ISR0_ERR_MASK) {
diff --git a/target/linux/generic/pending-5.10/850-0018-PCI-aardvark-Use-separate-INTA-interrupt-for-emulate.patch b/target/linux/generic/pending-5.10/850-0018-PCI-aardvark-Use-separate-INTA-interrupt-for-emulate.patch
deleted file mode 100644
index 62a4bfe80729..000000000000
--- a/target/linux/generic/pending-5.10/850-0018-PCI-aardvark-Use-separate-INTA-interrupt-for-emulate.patch
+++ /dev/null
@@ -1,161 +0,0 @@
-From db305233136f5aa2444a8287a279384e8458c458 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 1 Apr 2021 20:12:48 +0200
-Subject: [PATCH] PCI: aardvark: Use separate INTA interrupt for emulated root
- bridge
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Emulated root bridge currently provides only one Legacy INTA interrupt
-which is used for reporting PCIe PME and ERR events and handled by kernel
-PCIe PME and AER drivers.
-
-Aardvark HW reports these PME and ERR events separately, so there is no
-need to mix real INTA interrupt and emulated INTA interrupt for PCIe PME
-and AER drivers.
-
-Register a new advk-RP (as in Root Port) irq chip and a new irq domain
-for emulated root bridge and use this new separate irq domain for
-providing INTA interrupt from emulated root bridge for PME and ERR events.
-
-The real INTA interrupt from real devices is now separate.
-
-A custom map_irq callback function on PCI host bridge structure is used to
-allocate IRQ mapping for emulated root bridge from new irq domain. Original
-callback of_irq_parse_and_map_pci() is used for all other devices as before.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 69 ++++++++++++++++++++++++++-
- 1 file changed, 67 insertions(+), 2 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -280,6 +280,7 @@ struct advk_pcie {
- 	} wins[OB_WIN_COUNT];
- 	u8 wins_count;
- 	int irq;
-+	struct irq_domain *rp_irq_domain;
- 	struct irq_domain *irq_domain;
- 	struct irq_chip irq_chip;
- 	raw_spinlock_t irq_lock;
-@@ -1443,6 +1444,44 @@ static void advk_pcie_remove_irq_domain(
- 	irq_domain_remove(pcie->irq_domain);
- }
- 
-+static struct irq_chip advk_rp_irq_chip = {
-+	.name = "advk-RP",
-+};
-+
-+static int advk_pcie_rp_irq_map(struct irq_domain *h,
-+				unsigned int virq, irq_hw_number_t hwirq)
-+{
-+	struct advk_pcie *pcie = h->host_data;
-+
-+	irq_set_chip_and_handler(virq, &advk_rp_irq_chip, handle_simple_irq);
-+	irq_set_chip_data(virq, pcie);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops advk_pcie_rp_irq_domain_ops = {
-+	.map = advk_pcie_rp_irq_map,
-+	.xlate = irq_domain_xlate_onecell,
-+};
-+
-+static int advk_pcie_init_rp_irq_domain(struct advk_pcie *pcie)
-+{
-+	pcie->rp_irq_domain = irq_domain_add_linear(NULL, 1,
-+						    &advk_pcie_rp_irq_domain_ops,
-+						    pcie);
-+	if (!pcie->rp_irq_domain) {
-+		dev_err(&pcie->pdev->dev, "Failed to add Root Port IRQ domain\n");
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
-+
-+static void advk_pcie_remove_rp_irq_domain(struct advk_pcie *pcie)
-+{
-+	irq_domain_remove(pcie->rp_irq_domain);
-+}
-+
- static void advk_pcie_handle_pme(struct advk_pcie *pcie)
- {
- 	u32 requester = advk_readl(pcie, PCIE_MSG_LOG_REG) >> 16;
-@@ -1465,7 +1504,7 @@ static void advk_pcie_handle_pme(struct
- 		if (!(le16_to_cpu(pcie->bridge.pcie_conf.rootctl) & PCI_EXP_RTCTL_PMEIE))
- 			return;
- 
--		virq = irq_find_mapping(pcie->irq_domain, 0);
-+		virq = irq_find_mapping(pcie->rp_irq_domain, 0);
- 		if (generic_handle_irq(virq) == -EINVAL)
- 			dev_err_ratelimited(&pcie->pdev->dev, "unhandled PME IRQ\n");
- 	}
-@@ -1519,7 +1558,7 @@ static void advk_pcie_handle_int(struct
- 		 * Aardvark HW returns zero for PCI_ERR_ROOT_AER_IRQ, so use
- 		 * PCIe interrupt 0
- 		 */
--		virq = irq_find_mapping(pcie->irq_domain, 0);
-+		virq = irq_find_mapping(pcie->rp_irq_domain, 0);
- 		if (generic_handle_irq(virq) == -EINVAL)
- 			dev_err_ratelimited(&pcie->pdev->dev, "unhandled ERR IRQ\n");
- 	}
-@@ -1565,6 +1604,21 @@ static void advk_pcie_irq_handler(struct
- 	chained_irq_exit(chip, desc);
- }
- 
-+static int advk_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	struct advk_pcie *pcie = dev->bus->sysdata;
-+
-+	/*
-+	 * Emulated root bridge has its own emulated irq chip and irq domain.
-+	 * Argument pin is the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD) and
-+	 * hwirq for irq_create_mapping() is indexed from zero.
-+	 */
-+	if (pci_is_root_bus(dev->bus))
-+		return irq_create_mapping(pcie->rp_irq_domain, pin - 1);
-+	else
-+		return of_irq_parse_and_map_pci(dev, slot, pin);
-+}
-+
- static void __maybe_unused advk_pcie_disable_phy(struct advk_pcie *pcie)
- {
- 	phy_power_off(pcie->phy);
-@@ -1768,14 +1822,24 @@ static int advk_pcie_probe(struct platfo
- 		return ret;
- 	}
- 
-+	ret = advk_pcie_init_rp_irq_domain(pcie);
-+	if (ret) {
-+		dev_err(dev, "Failed to initialize irq\n");
-+		advk_pcie_remove_msi_irq_domain(pcie);
-+		advk_pcie_remove_irq_domain(pcie);
-+		return ret;
-+	}
-+
- 	irq_set_chained_handler_and_data(pcie->irq, advk_pcie_irq_handler, pcie);
- 
- 	bridge->sysdata = pcie;
- 	bridge->ops = &advk_pcie_ops;
-+	bridge->map_irq = advk_pcie_map_irq;
- 
- 	ret = pci_host_probe(bridge);
- 	if (ret < 0) {
- 		irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
-+		advk_pcie_remove_rp_irq_domain(pcie);
- 		advk_pcie_remove_msi_irq_domain(pcie);
- 		advk_pcie_remove_irq_domain(pcie);
- 		return ret;
-@@ -1827,6 +1891,7 @@ static int advk_pcie_remove(struct platf
- 	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
- 
- 	/* Remove IRQ domains */
-+	advk_pcie_remove_rp_irq_domain(pcie);
- 	advk_pcie_remove_msi_irq_domain(pcie);
- 	advk_pcie_remove_irq_domain(pcie);
- 
diff --git a/target/linux/generic/pending-5.10/850-0019-PCI-aardvark-Remove-irq_mask_ack-callback-for-INTx-i.patch b/target/linux/generic/pending-5.10/850-0019-PCI-aardvark-Remove-irq_mask_ack-callback-for-INTx-i.patch
deleted file mode 100644
index 75f31ba19e10..000000000000
--- a/target/linux/generic/pending-5.10/850-0019-PCI-aardvark-Remove-irq_mask_ack-callback-for-INTx-i.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 8c9eef96e24f34ff8b62b230700416b822691a37 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 1 Apr 2021 14:24:12 +0200
-Subject: [PATCH] PCI: aardvark: Remove irq_mask_ack callback for INTx
- interrupts
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Callback for irq_mask_ack is the same as for irq_mask. As there is no
-special handling for irq_ack, there is no need to define irq_mask_ack too.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Acked-by: Marc Zyngier <maz@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1422,7 +1422,6 @@ static int advk_pcie_init_irq_domain(str
- 	}
- 
- 	irq_chip->irq_mask = advk_pcie_irq_mask;
--	irq_chip->irq_mask_ack = advk_pcie_irq_mask;
- 	irq_chip->irq_unmask = advk_pcie_irq_unmask;
- 
- 	pcie->irq_domain =
diff --git a/target/linux/generic/pending-5.10/850-0020-PCI-aardvark-Don-t-mask-irq-when-mapping.patch b/target/linux/generic/pending-5.10/850-0020-PCI-aardvark-Don-t-mask-irq-when-mapping.patch
deleted file mode 100644
index 5583dc1b6fd6..000000000000
--- a/target/linux/generic/pending-5.10/850-0020-PCI-aardvark-Don-t-mask-irq-when-mapping.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From dc01fca5a9d9c09ce9a3fb2bc2e7715c37ff3bd9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 1 Apr 2021 14:30:06 +0200
-Subject: [PATCH] PCI: aardvark: Don't mask irq when mapping
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-By default, all Legacy INTx interrupts are masked, so there is no need to
-mask this interrupt during irq_map callback.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1339,7 +1339,6 @@ static int advk_pcie_irq_map(struct irq_
- {
- 	struct advk_pcie *pcie = h->host_data;
- 
--	advk_pcie_irq_mask(irq_get_irq_data(virq));
- 	irq_set_status_flags(virq, IRQ_LEVEL);
- 	irq_set_chip_and_handler(virq, &pcie->irq_chip,
- 				 handle_level_irq);
diff --git a/target/linux/generic/pending-5.10/850-0021-PCI-aardvark-Drop-__maybe_unused-from-advk_pcie_disa.patch b/target/linux/generic/pending-5.10/850-0021-PCI-aardvark-Drop-__maybe_unused-from-advk_pcie_disa.patch
deleted file mode 100644
index 5a1cff531048..000000000000
--- a/target/linux/generic/pending-5.10/850-0021-PCI-aardvark-Drop-__maybe_unused-from-advk_pcie_disa.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From a511c99262ce19ee06908d27212b39ec4c5aeb17 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Wed, 8 Dec 2021 04:40:29 +0100
-Subject: [PATCH] PCI: aardvark: Drop __maybe_unused from
- advk_pcie_disable_phy()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This function is now always used in driver remove method, drop the
-__maybe_unused attribute.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1617,7 +1617,7 @@ static int advk_pcie_map_irq(const struc
- 		return of_irq_parse_and_map_pci(dev, slot, pin);
- }
- 
--static void __maybe_unused advk_pcie_disable_phy(struct advk_pcie *pcie)
-+static void advk_pcie_disable_phy(struct advk_pcie *pcie)
- {
- 	phy_power_off(pcie->phy);
- 	phy_exit(pcie->phy);
diff --git a/target/linux/generic/pending-5.10/850-0022-PCI-aardvark-Update-comment-about-link-going-down-af.patch b/target/linux/generic/pending-5.10/850-0022-PCI-aardvark-Update-comment-about-link-going-down-af.patch
deleted file mode 100644
index cc489ebc8a83..000000000000
--- a/target/linux/generic/pending-5.10/850-0022-PCI-aardvark-Update-comment-about-link-going-down-af.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From bafda858364003a70b9cda84282f9761587f8033 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 10 Jan 2022 00:47:38 +0100
-Subject: [PATCH] PCI: aardvark: Update comment about link going down after
- link-up
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Update the comment about what happens when link goes down after we have
-checked for link-up. If a PIO request is done while link-down, we have
-a serious problem.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1005,8 +1005,12 @@ static bool advk_pcie_valid_device(struc
- 		return false;
- 
- 	/*
--	 * If the link goes down after we check for link-up, nothing bad
--	 * happens but the config access times out.
-+	 * If the link goes down after we check for link-up, we have a problem:
-+	 * if a PIO request is executed while link-down, the whole controller
-+	 * gets stuck in a non-functional state, and even after link comes up
-+	 * again, PIO requests won't work anymore, and a reset of the whole PCIe
-+	 * controller is needed. Therefore we need to prevent sending PIO
-+	 * requests while the link is down.
- 	 */
- 	if (!pci_is_root_bus(bus) && !advk_pcie_link_up(pcie))
- 		return false;
diff --git a/target/linux/generic/pending-5.10/850-0023-PCI-aardvark-Make-main-irq_chip-structure-a-static-d.patch b/target/linux/generic/pending-5.10/850-0023-PCI-aardvark-Make-main-irq_chip-structure-a-static-d.patch
deleted file mode 100644
index a5e2d8a3dd92..000000000000
--- a/target/linux/generic/pending-5.10/850-0023-PCI-aardvark-Make-main-irq_chip-structure-a-static-d.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From 663b9f99bb35dbc0c7b685f71ee3668a60d31320 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 10 Jan 2022 02:02:00 +0100
-Subject: [PATCH] PCI: aardvark: Make main irq_chip structure a static driver
- structure
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Marc Zyngier says [1] that we should use struct irq_chip as a global
-static struct in the driver. Even though the structure currently
-contains a dynamic member (parent_device), Marc says [2] that he plans
-to kill it and make the structure completely static.
-
-We have already converted others irq_chip structures in this driver in
-this way, but we omitted this one because the .name member is
-dynamically created from device's name, and the name is displayed in
-sysfs, so changing it would break sysfs ABI.
-
-The rationale for changing the name (to "advk-INT") in spite of sysfs
-ABI, and thus allowing to convert to a static structure, is that after
-the other changes we made in this series, the IRQ chip is basically
-something different: it no logner generates ERR and PME interrupts (they
-are generated by emulated bridge's rp_irq_chip).
-
-[1] https://lore.kernel.org/linux-pci/877dbcvngf.wl-maz@kernel.org/
-[2] https://lore.kernel.org/linux-pci/874k6gvkhz.wl-maz@kernel.org/
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 25 +++++++------------------
- 1 file changed, 7 insertions(+), 18 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -282,7 +282,6 @@ struct advk_pcie {
- 	int irq;
- 	struct irq_domain *rp_irq_domain;
- 	struct irq_domain *irq_domain;
--	struct irq_chip irq_chip;
- 	raw_spinlock_t irq_lock;
- 	struct irq_domain *msi_domain;
- 	struct irq_domain *msi_inner_domain;
-@@ -1338,14 +1337,19 @@ static void advk_pcie_irq_unmask(struct
- 	raw_spin_unlock_irqrestore(&pcie->irq_lock, flags);
- }
- 
-+static struct irq_chip advk_irq_chip = {
-+	.name		= "advk-INT",
-+	.irq_mask	= advk_pcie_irq_mask,
-+	.irq_unmask	= advk_pcie_irq_unmask,
-+};
-+
- static int advk_pcie_irq_map(struct irq_domain *h,
- 			     unsigned int virq, irq_hw_number_t hwirq)
- {
- 	struct advk_pcie *pcie = h->host_data;
- 
- 	irq_set_status_flags(virq, IRQ_LEVEL);
--	irq_set_chip_and_handler(virq, &pcie->irq_chip,
--				 handle_level_irq);
-+	irq_set_chip_and_handler(virq, &advk_irq_chip, handle_level_irq);
- 	irq_set_chip_data(virq, pcie);
- 
- 	return 0;
-@@ -1404,7 +1408,6 @@ static int advk_pcie_init_irq_domain(str
- 	struct device *dev = &pcie->pdev->dev;
- 	struct device_node *node = dev->of_node;
- 	struct device_node *pcie_intc_node;
--	struct irq_chip *irq_chip;
- 	int ret = 0;
- 
- 	raw_spin_lock_init(&pcie->irq_lock);
-@@ -1415,28 +1418,14 @@ static int advk_pcie_init_irq_domain(str
- 		return -ENODEV;
- 	}
- 
--	irq_chip = &pcie->irq_chip;
--
--	irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-irq",
--					dev_name(dev));
--	if (!irq_chip->name) {
--		ret = -ENOMEM;
--		goto out_put_node;
--	}
--
--	irq_chip->irq_mask = advk_pcie_irq_mask;
--	irq_chip->irq_unmask = advk_pcie_irq_unmask;
--
- 	pcie->irq_domain =
- 		irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
- 				      &advk_pcie_irq_domain_ops, pcie);
- 	if (!pcie->irq_domain) {
- 		dev_err(dev, "Failed to get a INTx IRQ domain\n");
- 		ret = -ENOMEM;
--		goto out_put_node;
- 	}
- 
--out_put_node:
- 	of_node_put(pcie_intc_node);
- 	return ret;
- }
diff --git a/target/linux/generic/pending-5.10/851-0001-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch b/target/linux/generic/pending-5.10/851-0001-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch
deleted file mode 100644
index 4a963be952c8..000000000000
--- a/target/linux/generic/pending-5.10/851-0001-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From a719f7ba7fcba05d85801c6f0267f389a21627c1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Fri, 24 Sep 2021 13:03:02 +0200
-Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver
- configuration
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Port number is encoded into argument for SMC call. It is zero for SATA,
-PCIe and also both USB 3.0 PHYs. It is non-zero only for Ethernet PHY
-(incorrectly called SGMII) on lane 0. Ethernet PHY on lane 1 also uses zero
-port number.
-
-So construct "port" bits for SMC call argument can be constructed directly
-from PHY type and lane number.
-
-Change driver code to always pass zero port number for non-ethernet PHYs
-and for ethernet PHYs determinate port number from lane number. This
-simplifies the driver.
-
-As port number from DT PHY configuration is not used anymore, remove whole
-driver code which parses it. This also simplifies the driver.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 62 +++++++++-----------
- 1 file changed, 29 insertions(+), 33 deletions(-)
-
---- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-@@ -20,7 +20,6 @@
- #include <linux/platform_device.h>
- 
- #define MVEBU_A3700_COMPHY_LANES		3
--#define MVEBU_A3700_COMPHY_PORTS		2
- 
- /* COMPHY Fast SMC function identifiers */
- #define COMPHY_SIP_POWER_ON			0x82000001
-@@ -45,51 +44,47 @@
- #define COMPHY_FW_NET(mode, idx, speed)		(COMPHY_FW_MODE(mode) | \
- 						 ((idx) << 8) |	\
- 						 ((speed) << 2))
--#define COMPHY_FW_PCIE(mode, idx, speed, width)	(COMPHY_FW_NET(mode, idx, speed) | \
-+#define COMPHY_FW_PCIE(mode, speed, width)	(COMPHY_FW_NET(mode, 0, speed) | \
- 						 ((width) << 18))
- 
- struct mvebu_a3700_comphy_conf {
- 	unsigned int lane;
- 	enum phy_mode mode;
- 	int submode;
--	unsigned int port;
- 	u32 fw_mode;
- };
- 
--#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _port, _fw)	\
-+#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _fw)		\
- 	{								\
- 		.lane = _lane,						\
- 		.mode = _mode,						\
- 		.submode = _smode,					\
--		.port = _port,						\
- 		.fw_mode = _fw,						\
- 	}
- 
--#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _port, _fw) \
--	MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _port, _fw)
-+#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _fw) \
-+	MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _fw)
- 
--#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _port, _fw) \
--	MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _port, _fw)
-+#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _fw) \
-+	MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _fw)
- 
- static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = {
- 	/* lane 0 */
--	MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, 0,
-+	MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS,
- 				    COMPHY_FW_MODE_USB3H),
--	MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, 1,
-+	MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII,
- 				    COMPHY_FW_MODE_SGMII),
--	MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, 1,
-+	MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX,
- 				    COMPHY_FW_MODE_2500BASEX),
- 	/* lane 1 */
--	MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, 0,
--				    COMPHY_FW_MODE_PCIE),
--	MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, 0,
-+	MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
-+	MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII,
- 				    COMPHY_FW_MODE_SGMII),
--	MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, 0,
-+	MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX,
- 				    COMPHY_FW_MODE_2500BASEX),
- 	/* lane 2 */
--	MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, 0,
--				    COMPHY_FW_MODE_SATA),
--	MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, 0,
-+	MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
-+	MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS,
- 				    COMPHY_FW_MODE_USB3H),
- };
- 
-@@ -98,7 +93,6 @@ struct mvebu_a3700_comphy_lane {
- 	unsigned int id;
- 	enum phy_mode mode;
- 	int submode;
--	int port;
- };
- 
- static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane,
-@@ -120,7 +114,7 @@ static int mvebu_a3700_comphy_smc(unsign
- 	}
- }
- 
--static int mvebu_a3700_comphy_get_fw_mode(int lane, int port,
-+static int mvebu_a3700_comphy_get_fw_mode(int lane,
- 					  enum phy_mode mode,
- 					  int submode)
- {
-@@ -132,7 +126,6 @@ static int mvebu_a3700_comphy_get_fw_mod
- 
- 	for (i = 0; i < n; i++) {
- 		if (mvebu_a3700_comphy_modes[i].lane == lane &&
--		    mvebu_a3700_comphy_modes[i].port == port &&
- 		    mvebu_a3700_comphy_modes[i].mode == mode &&
- 		    mvebu_a3700_comphy_modes[i].submode == submode)
- 			break;
-@@ -153,7 +146,7 @@ static int mvebu_a3700_comphy_set_mode(s
- 	if (submode == PHY_INTERFACE_MODE_1000BASEX)
- 		submode = PHY_INTERFACE_MODE_SGMII;
- 
--	fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, mode,
-+	fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, mode,
- 						 submode);
- 	if (fw_mode < 0) {
- 		dev_err(lane->dev, "invalid COMPHY mode\n");
-@@ -172,9 +165,10 @@ static int mvebu_a3700_comphy_power_on(s
- 	struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
- 	u32 fw_param;
- 	int fw_mode;
-+	int fw_port;
- 	int ret;
- 
--	fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port,
-+	fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id,
- 						 lane->mode, lane->submode);
- 	if (fw_mode < 0) {
- 		dev_err(lane->dev, "invalid COMPHY mode\n");
-@@ -191,17 +185,18 @@ static int mvebu_a3700_comphy_power_on(s
- 		fw_param = COMPHY_FW_MODE(fw_mode);
- 		break;
- 	case PHY_MODE_ETHERNET:
-+		fw_port = (lane->id == 0) ? 1 : 0;
- 		switch (lane->submode) {
- 		case PHY_INTERFACE_MODE_SGMII:
- 			dev_dbg(lane->dev, "set lane %d to SGMII mode\n",
- 				lane->id);
--			fw_param = COMPHY_FW_NET(fw_mode, lane->port,
-+			fw_param = COMPHY_FW_NET(fw_mode, fw_port,
- 						 COMPHY_FW_SPEED_1_25G);
- 			break;
- 		case PHY_INTERFACE_MODE_2500BASEX:
- 			dev_dbg(lane->dev, "set lane %d to 2500BASEX mode\n",
- 				lane->id);
--			fw_param = COMPHY_FW_NET(fw_mode, lane->port,
-+			fw_param = COMPHY_FW_NET(fw_mode, fw_port,
- 						 COMPHY_FW_SPEED_3_125G);
- 			break;
- 		default:
-@@ -212,8 +207,7 @@ static int mvebu_a3700_comphy_power_on(s
- 		break;
- 	case PHY_MODE_PCIE:
- 		dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id);
--		fw_param = COMPHY_FW_PCIE(fw_mode, lane->port,
--					  COMPHY_FW_SPEED_5G,
-+		fw_param = COMPHY_FW_PCIE(fw_mode, COMPHY_FW_SPEED_5G,
- 					  phy->attrs.bus_width);
- 		break;
- 	default:
-@@ -247,17 +241,20 @@ static struct phy *mvebu_a3700_comphy_xl
- 					    struct of_phandle_args *args)
- {
- 	struct mvebu_a3700_comphy_lane *lane;
-+	unsigned int port;
- 	struct phy *phy;
- 
--	if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS))
--		return ERR_PTR(-EINVAL);
--
- 	phy = of_phy_simple_xlate(dev, args);
- 	if (IS_ERR(phy))
- 		return phy;
- 
- 	lane = phy_get_drvdata(phy);
--	lane->port = args->args[0];
-+
-+	port = args->args[0];
-+	if (port != 0 && (port != 1 || lane->id != 0)) {
-+		dev_err(lane->dev, "invalid port number %u\n", port);
-+		return ERR_PTR(-EINVAL);
-+	}
- 
- 	return phy;
- }
-@@ -302,7 +299,6 @@ static int mvebu_a3700_comphy_probe(stru
- 		lane->mode = PHY_MODE_INVALID;
- 		lane->submode = PHY_INTERFACE_MODE_NA;
- 		lane->id = lane_id;
--		lane->port = -1;
- 		phy_set_drvdata(phy, lane);
- 	}
- 
diff --git a/target/linux/generic/pending-5.10/851-0002-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch b/target/linux/generic/pending-5.10/851-0002-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch
deleted file mode 100644
index 73ead1e16cb0..000000000000
--- a/target/linux/generic/pending-5.10/851-0002-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch
+++ /dev/null
@@ -1,1564 +0,0 @@
-From 9d276da259cce20b2ed7a868b6e6a6a205f7bb04 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 23 Sep 2021 19:20:13 +0200
-Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Add native kernel
- implementation
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Remove old RPC implementation and add a new native kernel implementation.
-
-The old implementation uses ARM SMC API to issue RPC calls to ARM Trusted
-Firmware which provides real implementation of PHY configuration.
-
-But older versions of ARM Trusted Firmware do not provide this PHY
-configuration functionality, simply returning: operation not supported; or
-worse, some versions provide the configuration functionality incorrectly.
-
-For example the firmware shipped in ESPRESSObin board has this older
-version of ARM Trusted Firmware and therefore SATA, USB 3.0 and PCIe
-functionality do not work with newer versions of Linux kernel.
-
-Due to the above reasons, the following commits were introduced into Linux,
-to workaround these issues by ignoring -EOPNOTSUPP error code from
-phy-mvebu-a3700-comphy driver function phy_power_on():
-
-commit 45aefe3d2251 ("ata: ahci: mvebu: Make SATA PHY optional for Armada
-3720")
-commit 3241929b67d2 ("usb: host: xhci: mvebu: make USB 3.0 PHY optional for
-Armada 3720")
-commit b0c6ae0f8948 ("PCI: aardvark: Fix initialization with old Marvell's
-Arm Trusted Firmware")
-
-Replace this RPC implementation with proper native kernel implementation,
-which is independent on the firmware. Never return -EOPNOTSUPP for proper
-arguments.
-
-This should solve multiple issues with real-world boards, where it is not
-possible or really inconvenient to change the firmware. Let's eliminate
-these issues.
-
-This implementation is ported directly from Armada 3720 comphy driver found
-in newest version of ARM Trusted Firmware source code, but with various
-fixes of register names, some added comments, some refactoring due to the
-original code not conforming to kernel standards. Also PCIe mode poweroff
-support was added here, and PHY reset support. These changes are also going
-to be sent to ARM Trusted Firmware.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
-[ Pali did the porting from ATF.
-  I (Marek) then fixed some register names, some various other things,
-  added some comments and refactored the code to kernel standards. Also
-  fixed PHY poweroff and added PHY reset. ]
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 1351 ++++++++++++++++--
- 1 file changed, 1234 insertions(+), 117 deletions(-)
-
---- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-@@ -5,12 +5,16 @@
-  * Authors:
-  *   Evan Wang <xswang@marvell.com>
-  *   Miquèl Raynal <miquel.raynal@bootlin.com>
-+ *   Pali Rohár <pali@kernel.org>
-+ *   Marek Behún <kabel@kernel.org>
-  *
-  * Structure inspired from phy-mvebu-cp110-comphy.c written by Antoine Tenart.
-- * SMC call initial support done by Grzegorz Jaszczyk.
-+ * Comphy code from ARM Trusted Firmware ported by Pali Rohár <pali@kernel.org>
-+ * and Marek Behún <kabel@kernel.org>.
-  */
- 
--#include <linux/arm-smccc.h>
-+#include <linux/bitfield.h>
-+#include <linux/clk.h>
- #include <linux/io.h>
- #include <linux/iopoll.h>
- #include <linux/mfd/syscon.h>
-@@ -18,103 +22,1147 @@
- #include <linux/phy.h>
- #include <linux/phy/phy.h>
- #include <linux/platform_device.h>
-+#include <linux/spinlock.h>
- 
--#define MVEBU_A3700_COMPHY_LANES		3
-+#define PLL_SET_DELAY_US		600
-+#define COMPHY_PLL_SLEEP		1000
-+#define COMPHY_PLL_TIMEOUT		150000
-+
-+/* Comphy lane2 indirect access register offset */
-+#define COMPHY_LANE2_INDIR_ADDR		0x0
-+#define COMPHY_LANE2_INDIR_DATA		0x4
-+
-+/* SATA and USB3 PHY offset compared to SATA PHY */
-+#define COMPHY_LANE2_REGS_BASE		0x200
-+
-+/*
-+ * When accessing common PHY lane registers directly, we need to shift by 1,
-+ * since the registers are 16-bit.
-+ */
-+#define COMPHY_LANE_REG_DIRECT(reg)	(((reg) & 0x7FF) << 1)
-+
-+/* COMPHY registers */
-+#define COMPHY_POWER_PLL_CTRL		0x01
-+#define PU_IVREF_BIT			BIT(15)
-+#define PU_PLL_BIT			BIT(14)
-+#define PU_RX_BIT			BIT(13)
-+#define PU_TX_BIT			BIT(12)
-+#define PU_TX_INTP_BIT			BIT(11)
-+#define PU_DFE_BIT			BIT(10)
-+#define RESET_DTL_RX_BIT		BIT(9)
-+#define PLL_LOCK_BIT			BIT(8)
-+#define REF_FREF_SEL_MASK		GENMASK(4, 0)
-+#define REF_FREF_SEL_SERDES_25MHZ	FIELD_PREP(REF_FREF_SEL_MASK, 0x1)
-+#define REF_FREF_SEL_SERDES_40MHZ	FIELD_PREP(REF_FREF_SEL_MASK, 0x3)
-+#define REF_FREF_SEL_SERDES_50MHZ	FIELD_PREP(REF_FREF_SEL_MASK, 0x4)
-+#define REF_FREF_SEL_PCIE_USB3_25MHZ	FIELD_PREP(REF_FREF_SEL_MASK, 0x2)
-+#define REF_FREF_SEL_PCIE_USB3_40MHZ	FIELD_PREP(REF_FREF_SEL_MASK, 0x3)
-+#define COMPHY_MODE_MASK		GENMASK(7, 5)
-+#define COMPHY_MODE_SATA		FIELD_PREP(COMPHY_MODE_MASK, 0x0)
-+#define COMPHY_MODE_PCIE		FIELD_PREP(COMPHY_MODE_MASK, 0x3)
-+#define COMPHY_MODE_SERDES		FIELD_PREP(COMPHY_MODE_MASK, 0x4)
-+#define COMPHY_MODE_USB3		FIELD_PREP(COMPHY_MODE_MASK, 0x5)
-+
-+#define COMPHY_KVCO_CAL_CTRL		0x02
-+#define USE_MAX_PLL_RATE_BIT		BIT(12)
-+#define SPEED_PLL_MASK			GENMASK(7, 2)
-+#define SPEED_PLL_VALUE_16		FIELD_PREP(SPEED_PLL_MASK, 0x10)
-+
-+#define COMPHY_DIG_LOOPBACK_EN		0x23
-+#define SEL_DATA_WIDTH_MASK		GENMASK(11, 10)
-+#define DATA_WIDTH_10BIT		FIELD_PREP(SEL_DATA_WIDTH_MASK, 0x0)
-+#define DATA_WIDTH_20BIT		FIELD_PREP(SEL_DATA_WIDTH_MASK, 0x1)
-+#define DATA_WIDTH_40BIT		FIELD_PREP(SEL_DATA_WIDTH_MASK, 0x2)
-+#define PLL_READY_TX_BIT		BIT(4)
-+
-+#define COMPHY_SYNC_PATTERN		0x24
-+#define TXD_INVERT_BIT			BIT(10)
-+#define RXD_INVERT_BIT			BIT(11)
-+
-+#define COMPHY_SYNC_MASK_GEN		0x25
-+#define PHY_GEN_MAX_MASK		GENMASK(11, 10)
-+#define PHY_GEN_MAX_USB3_5G		FIELD_PREP(PHY_GEN_MAX_MASK, 0x1)
-+
-+#define COMPHY_ISOLATION_CTRL		0x26
-+#define PHY_ISOLATE_MODE		BIT(15)
-+
-+#define COMPHY_GEN2_SET2		0x3e
-+#define GS2_TX_SSC_AMP_MASK		GENMASK(15, 9)
-+#define GS2_TX_SSC_AMP_4128		FIELD_PREP(GS2_TX_SSC_AMP_MASK, 0x20)
-+#define GS2_VREG_RXTX_MAS_ISET_MASK	GENMASK(8, 7)
-+#define GS2_VREG_RXTX_MAS_ISET_60U	FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\
-+						   0x0)
-+#define GS2_VREG_RXTX_MAS_ISET_80U	FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\
-+						   0x1)
-+#define GS2_VREG_RXTX_MAS_ISET_100U	FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\
-+						   0x2)
-+#define GS2_VREG_RXTX_MAS_ISET_120U	FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\
-+						   0x3)
-+#define GS2_RSVD_6_0_MASK		GENMASK(6, 0)
-+
-+#define COMPHY_GEN3_SET2		0x3f
-+
-+#define COMPHY_IDLE_SYNC_EN		0x48
-+#define IDLE_SYNC_EN			BIT(12)
-+
-+#define COMPHY_MISC_CTRL0		0x4F
-+#define CLK100M_125M_EN			BIT(4)
-+#define TXDCLK_2X_SEL			BIT(6)
-+#define CLK500M_EN			BIT(7)
-+#define PHY_REF_CLK_SEL			BIT(10)
-+
-+#define COMPHY_SFT_RESET		0x52
-+#define SFT_RST				BIT(9)
-+#define SFT_RST_NO_REG			BIT(10)
-+
-+#define COMPHY_MISC_CTRL1		0x73
-+#define SEL_BITS_PCIE_FORCE		BIT(15)
-+
-+#define COMPHY_GEN2_SET3		0x112
-+#define GS3_FFE_CAP_SEL_MASK		GENMASK(3, 0)
-+#define GS3_FFE_CAP_SEL_VALUE		FIELD_PREP(GS3_FFE_CAP_SEL_MASK, 0xF)
-+
-+/* PIPE registers */
-+#define COMPHY_PIPE_LANE_CFG0		0x180
-+#define PRD_TXDEEMPH0_MASK		BIT(0)
-+#define PRD_TXMARGIN_MASK		GENMASK(3, 1)
-+#define PRD_TXSWING_MASK		BIT(4)
-+#define CFG_TX_ALIGN_POS_MASK		GENMASK(8, 5)
-+
-+#define COMPHY_PIPE_LANE_CFG1		0x181
-+#define PRD_TXDEEMPH1_MASK		BIT(15)
-+#define USE_MAX_PLL_RATE_EN		BIT(9)
-+#define TX_DET_RX_MODE			BIT(6)
-+#define GEN2_TX_DATA_DLY_MASK		GENMASK(4, 3)
-+#define GEN2_TX_DATA_DLY_DEFT		FIELD_PREP(GEN2_TX_DATA_DLY_MASK, 2)
-+#define TX_ELEC_IDLE_MODE_EN		BIT(0)
-+
-+#define COMPHY_PIPE_LANE_STAT1		0x183
-+#define TXDCLK_PCLK_EN			BIT(0)
-+
-+#define COMPHY_PIPE_LANE_CFG4		0x188
-+#define SPREAD_SPECTRUM_CLK_EN		BIT(7)
-+
-+#define COMPHY_PIPE_RST_CLK_CTRL	0x1C1
-+#define PIPE_SOFT_RESET			BIT(0)
-+#define PIPE_REG_RESET			BIT(1)
-+#define MODE_CORE_CLK_FREQ_SEL		BIT(9)
-+#define MODE_PIPE_WIDTH_32		BIT(3)
-+#define MODE_REFDIV_MASK		GENMASK(5, 4)
-+#define MODE_REFDIV_BY_4		FIELD_PREP(MODE_REFDIV_MASK, 0x2)
-+
-+#define COMPHY_PIPE_TEST_MODE_CTRL	0x1C2
-+#define MODE_MARGIN_OVERRIDE		BIT(2)
-+
-+#define COMPHY_PIPE_CLK_SRC_LO		0x1C3
-+#define MODE_CLK_SRC			BIT(0)
-+#define BUNDLE_PERIOD_SEL		BIT(1)
-+#define BUNDLE_PERIOD_SCALE_MASK	GENMASK(3, 2)
-+#define BUNDLE_SAMPLE_CTRL		BIT(4)
-+#define PLL_READY_DLY_MASK		GENMASK(7, 5)
-+#define CFG_SEL_20B			BIT(15)
-+
-+#define COMPHY_PIPE_PWR_MGM_TIM1	0x1D0
-+#define CFG_PM_OSCCLK_WAIT_MASK		GENMASK(15, 12)
-+#define CFG_PM_RXDEN_WAIT_MASK		GENMASK(11, 8)
-+#define CFG_PM_RXDEN_WAIT_1_UNIT	FIELD_PREP(CFG_PM_RXDEN_WAIT_MASK, 0x1)
-+#define CFG_PM_RXDLOZ_WAIT_MASK		GENMASK(7, 0)
-+#define CFG_PM_RXDLOZ_WAIT_7_UNIT	FIELD_PREP(CFG_PM_RXDLOZ_WAIT_MASK, 0x7)
-+#define CFG_PM_RXDLOZ_WAIT_12_UNIT	FIELD_PREP(CFG_PM_RXDLOZ_WAIT_MASK, 0xC)
-+
-+/*
-+ * This register is not from PHY lane register space. It only exists in the
-+ * indirect register space, before the actual PHY lane 2 registers. So the
-+ * offset is absolute, not relative to COMPHY_LANE2_REGS_BASE.
-+ * It is used only for SATA PHY initialization.
-+ */
-+#define COMPHY_RESERVED_REG		0x0E
-+#define PHYCTRL_FRM_PIN_BIT		BIT(13)
- 
--/* COMPHY Fast SMC function identifiers */
--#define COMPHY_SIP_POWER_ON			0x82000001
--#define COMPHY_SIP_POWER_OFF			0x82000002
--#define COMPHY_SIP_PLL_LOCK			0x82000003
--
--#define COMPHY_FW_MODE_SATA			0x1
--#define COMPHY_FW_MODE_SGMII			0x2
--#define COMPHY_FW_MODE_2500BASEX		0x3
--#define COMPHY_FW_MODE_USB3H			0x4
--#define COMPHY_FW_MODE_USB3D			0x5
--#define COMPHY_FW_MODE_PCIE			0x6
--#define COMPHY_FW_MODE_USB3			0xa
--
--#define COMPHY_FW_SPEED_1_25G			0 /* SGMII 1G */
--#define COMPHY_FW_SPEED_2_5G			1
--#define COMPHY_FW_SPEED_3_125G			2 /* 2500BASE-X */
--#define COMPHY_FW_SPEED_5G			3
--#define COMPHY_FW_SPEED_MAX			0x3F
--
--#define COMPHY_FW_MODE(mode)			((mode) << 12)
--#define COMPHY_FW_NET(mode, idx, speed)		(COMPHY_FW_MODE(mode) | \
--						 ((idx) << 8) |	\
--						 ((speed) << 2))
--#define COMPHY_FW_PCIE(mode, speed, width)	(COMPHY_FW_NET(mode, 0, speed) | \
--						 ((width) << 18))
-+/* South Bridge PHY Configuration Registers */
-+#define COMPHY_PHY_REG(lane, reg)	(((1 - (lane)) * 0x28) + ((reg) & 0x3f))
-+
-+/*
-+ * lane0: USB3/GbE1 PHY Configuration 1
-+ * lane1: PCIe/GbE0 PHY Configuration 1
-+ * (used only by SGMII code)
-+ */
-+#define COMPHY_PHY_CFG1			0x0
-+#define PIN_PU_IVREF_BIT		BIT(1)
-+#define PIN_RESET_CORE_BIT		BIT(11)
-+#define PIN_RESET_COMPHY_BIT		BIT(12)
-+#define PIN_PU_PLL_BIT			BIT(16)
-+#define PIN_PU_RX_BIT			BIT(17)
-+#define PIN_PU_TX_BIT			BIT(18)
-+#define PIN_TX_IDLE_BIT			BIT(19)
-+#define GEN_RX_SEL_MASK			GENMASK(25, 22)
-+#define GEN_RX_SEL_VALUE(val)		FIELD_PREP(GEN_RX_SEL_MASK, (val))
-+#define GEN_TX_SEL_MASK			GENMASK(29, 26)
-+#define GEN_TX_SEL_VALUE(val)		FIELD_PREP(GEN_TX_SEL_MASK, (val))
-+#define SERDES_SPEED_1_25_G		0x6
-+#define SERDES_SPEED_3_125_G		0x8
-+#define PHY_RX_INIT_BIT			BIT(30)
-+
-+/*
-+ * lane0: USB3/GbE1 PHY Status 1
-+ * lane1: PCIe/GbE0 PHY Status 1
-+ * (used only by SGMII code)
-+ */
-+#define COMPHY_PHY_STAT1		0x18
-+#define PHY_RX_INIT_DONE_BIT		BIT(0)
-+#define PHY_PLL_READY_RX_BIT		BIT(2)
-+#define PHY_PLL_READY_TX_BIT		BIT(3)
-+
-+/* PHY Selector */
-+#define COMPHY_SELECTOR_PHY_REG			0xFC
-+/* bit0: 0: Lane1 is GbE0; 1: Lane1 is PCIe */
-+#define COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT	BIT(0)
-+/* bit4: 0: Lane0 is GbE1; 1: Lane0 is USB3 */
-+#define COMPHY_SELECTOR_USB3_GBE1_SEL_BIT	BIT(4)
-+/* bit8: 0: Lane0 is USB3 instead of GbE1, Lane2 is SATA; 1: Lane2 is USB3 */
-+#define COMPHY_SELECTOR_USB3_PHY_SEL_BIT	BIT(8)
- 
- struct mvebu_a3700_comphy_conf {
- 	unsigned int lane;
- 	enum phy_mode mode;
- 	int submode;
--	u32 fw_mode;
- };
- 
--#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _fw)		\
-+#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode)			\
- 	{								\
- 		.lane = _lane,						\
- 		.mode = _mode,						\
- 		.submode = _smode,					\
--		.fw_mode = _fw,						\
- 	}
- 
--#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _fw) \
--	MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _fw)
-+#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode) \
-+	MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA)
- 
--#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _fw) \
--	MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _fw)
-+#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode) \
-+	MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode)
- 
- static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = {
- 	/* lane 0 */
--	MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS,
--				    COMPHY_FW_MODE_USB3H),
--	MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII,
--				    COMPHY_FW_MODE_SGMII),
--	MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX,
--				    COMPHY_FW_MODE_2500BASEX),
-+	MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS),
-+	MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII),
-+	MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_1000BASEX),
-+	MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX),
- 	/* lane 1 */
--	MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
--	MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII,
--				    COMPHY_FW_MODE_SGMII),
--	MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX,
--				    COMPHY_FW_MODE_2500BASEX),
-+	MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE),
-+	MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII),
-+	MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_1000BASEX),
-+	MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX),
- 	/* lane 2 */
--	MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
--	MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS,
--				    COMPHY_FW_MODE_USB3H),
-+	MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA),
-+	MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS),
-+};
-+
-+struct mvebu_a3700_comphy_priv {
-+	void __iomem *comphy_regs;
-+	void __iomem *lane0_phy_regs; /* USB3 and GbE1 */
-+	void __iomem *lane1_phy_regs; /* PCIe and GbE0 */
-+	void __iomem *lane2_phy_indirect; /* SATA and USB3 */
-+	spinlock_t lock; /* for PHY selector access */
-+	bool xtal_is_40m;
- };
- 
- struct mvebu_a3700_comphy_lane {
-+	struct mvebu_a3700_comphy_priv *priv;
- 	struct device *dev;
- 	unsigned int id;
- 	enum phy_mode mode;
- 	int submode;
-+	bool invert_tx;
-+	bool invert_rx;
-+	bool needs_reset;
-+};
-+
-+struct gbe_phy_init_data_fix {
-+	u16 addr;
-+	u16 value;
-+};
-+
-+/* Changes to 40M1G25 mode data required for running 40M3G125 init mode */
-+static struct gbe_phy_init_data_fix gbe_phy_init_fix[] = {
-+	{ 0x005, 0x07CC }, { 0x015, 0x0000 }, { 0x01B, 0x0000 },
-+	{ 0x01D, 0x0000 }, { 0x01E, 0x0000 }, { 0x01F, 0x0000 },
-+	{ 0x020, 0x0000 }, { 0x021, 0x0030 }, { 0x026, 0x0888 },
-+	{ 0x04D, 0x0152 }, { 0x04F, 0xA020 }, { 0x050, 0x07CC },
-+	{ 0x053, 0xE9CA }, { 0x055, 0xBD97 }, { 0x071, 0x3015 },
-+	{ 0x076, 0x03AA }, { 0x07C, 0x0FDF }, { 0x0C2, 0x3030 },
-+	{ 0x0C3, 0x8000 }, { 0x0E2, 0x5550 }, { 0x0E3, 0x12A4 },
-+	{ 0x0E4, 0x7D00 }, { 0x0E6, 0x0C83 }, { 0x101, 0xFCC0 },
-+	{ 0x104, 0x0C10 }
- };
- 
--static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane,
--				  unsigned long mode)
-+/* 40M1G25 mode init data */
-+static u16 gbe_phy_init[512] = {
-+	/* 0       1       2       3       4       5       6       7 */
-+	/*-----------------------------------------------------------*/
-+	/* 8       9       A       B       C       D       E       F */
-+	0x3110, 0xFD83, 0x6430, 0x412F, 0x82C0, 0x06FA, 0x4500, 0x6D26,	/* 00 */
-+	0xAFC0, 0x8000, 0xC000, 0x0000, 0x2000, 0x49CC, 0x0BC9, 0x2A52,	/* 08 */
-+	0x0BD2, 0x0CDE, 0x13D2, 0x0CE8, 0x1149, 0x10E0, 0x0000, 0x0000,	/* 10 */
-+	0x0000, 0x0000, 0x0000, 0x0001, 0x0000, 0x4134, 0x0D2D, 0xFFFF,	/* 18 */
-+	0xFFE0, 0x4030, 0x1016, 0x0030, 0x0000, 0x0800, 0x0866, 0x0000,	/* 20 */
-+	0x0000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,	/* 28 */
-+	0xFFFF, 0xFFFF, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/* 30 */
-+	0x0000, 0x0000, 0x000F, 0x6A62, 0x1988, 0x3100, 0x3100, 0x3100,	/* 38 */
-+	0x3100, 0xA708, 0x2430, 0x0830, 0x1030, 0x4610, 0xFF00, 0xFF00,	/* 40 */
-+	0x0060, 0x1000, 0x0400, 0x0040, 0x00F0, 0x0155, 0x1100, 0xA02A,	/* 48 */
-+	0x06FA, 0x0080, 0xB008, 0xE3ED, 0x5002, 0xB592, 0x7A80, 0x0001,	/* 50 */
-+	0x020A, 0x8820, 0x6014, 0x8054, 0xACAA, 0xFC88, 0x2A02, 0x45CF,	/* 58 */
-+	0x000F, 0x1817, 0x2860, 0x064F, 0x0000, 0x0204, 0x1800, 0x6000,	/* 60 */
-+	0x810F, 0x4F23, 0x4000, 0x4498, 0x0850, 0x0000, 0x000E, 0x1002,	/* 68 */
-+	0x9D3A, 0x3009, 0xD066, 0x0491, 0x0001, 0x6AB0, 0x0399, 0x3780,	/* 70 */
-+	0x0040, 0x5AC0, 0x4A80, 0x0000, 0x01DF, 0x0000, 0x0007, 0x0000,	/* 78 */
-+	0x2D54, 0x00A1, 0x4000, 0x0100, 0xA20A, 0x0000, 0x0000, 0x0000,	/* 80 */
-+	0x0000, 0x0000, 0x0000, 0x7400, 0x0E81, 0x1000, 0x1242, 0x0210,	/* 88 */
-+	0x80DF, 0x0F1F, 0x2F3F, 0x4F5F, 0x6F7F, 0x0F1F, 0x2F3F, 0x4F5F,	/* 90 */
-+	0x6F7F, 0x4BAD, 0x0000, 0x0000, 0x0800, 0x0000, 0x2400, 0xB651,	/* 98 */
-+	0xC9E0, 0x4247, 0x0A24, 0x0000, 0xAF19, 0x1004, 0x0000, 0x0000,	/* A0 */
-+	0x0000, 0x0013, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/* A8 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/* B0 */
-+	0x0000, 0x0000, 0x0000, 0x0060, 0x0000, 0x0000, 0x0000, 0x0000,	/* B8 */
-+	0x0000, 0x0000, 0x3010, 0xFA00, 0x0000, 0x0000, 0x0000, 0x0003,	/* C0 */
-+	0x1618, 0x8200, 0x8000, 0x0400, 0x050F, 0x0000, 0x0000, 0x0000,	/* C8 */
-+	0x4C93, 0x0000, 0x1000, 0x1120, 0x0010, 0x1242, 0x1242, 0x1E00,	/* D0 */
-+	0x0000, 0x0000, 0x0000, 0x00F8, 0x0000, 0x0041, 0x0800, 0x0000,	/* D8 */
-+	0x82A0, 0x572E, 0x2490, 0x14A9, 0x4E00, 0x0000, 0x0803, 0x0541,	/* E0 */
-+	0x0C15, 0x0000, 0x0000, 0x0400, 0x2626, 0x0000, 0x0000, 0x4200,	/* E8 */
-+	0x0000, 0xAA55, 0x1020, 0x0000, 0x0000, 0x5010, 0x0000, 0x0000,	/* F0 */
-+	0x0000, 0x0000, 0x5000, 0x0000, 0x0000, 0x0000, 0x02F2, 0x0000,	/* F8 */
-+	0x101F, 0xFDC0, 0x4000, 0x8010, 0x0110, 0x0006, 0x0000, 0x0000,	/*100 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*108 */
-+	0x04CF, 0x0000, 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04C6, 0x0000,	/*110 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*118 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*120 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*128 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*130 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*138 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*140 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*148 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*150 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*158 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*160 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*168 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*170 */
-+	0x0000, 0x0000, 0x0000, 0x00F0, 0x08A2, 0x3112, 0x0A14, 0x0000,	/*178 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*180 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*188 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*190 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*198 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1A0 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1A8 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1B0 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1B8 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1C0 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1C8 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1D0 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1D8 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1E0 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1E8 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1F0 */
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000	/*1F8 */
-+};
-+
-+static inline void comphy_reg_set(void __iomem *addr, u32 data, u32 mask)
- {
--	struct arm_smccc_res res;
--	s32 ret;
-+	u32 val;
- 
--	arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res);
--	ret = res.a0;
-+	val = readl(addr);
-+	val = (val & ~mask) | (data & mask);
-+	writel(val, addr);
-+}
- 
--	switch (ret) {
--	case SMCCC_RET_SUCCESS:
--		return 0;
--	case SMCCC_RET_NOT_SUPPORTED:
--		return -EOPNOTSUPP;
-+static inline void comphy_reg_set16(void __iomem *addr, u16 data, u16 mask)
-+{
-+	u16 val;
-+
-+	val = readw(addr);
-+	val = (val & ~mask) | (data & mask);
-+	writew(val, addr);
-+}
-+
-+/* Used for accessing lane 2 registers (SATA/USB3 PHY) */
-+static void comphy_set_indirect(struct mvebu_a3700_comphy_priv *priv,
-+				u32 offset, u16 data, u16 mask)
-+{
-+	writel(offset,
-+	       priv->lane2_phy_indirect + COMPHY_LANE2_INDIR_ADDR);
-+	comphy_reg_set(priv->lane2_phy_indirect + COMPHY_LANE2_INDIR_DATA,
-+		       data, mask);
-+}
-+
-+static void comphy_lane_reg_set(struct mvebu_a3700_comphy_lane *lane,
-+				u16 reg, u16 data, u16 mask)
-+{
-+	if (lane->id == 2) {
-+		/* lane 2 PHY registers are accessed indirectly */
-+		comphy_set_indirect(lane->priv,
-+				    reg + COMPHY_LANE2_REGS_BASE,
-+				    data, mask);
-+	} else {
-+		void __iomem *base = lane->id == 1 ?
-+				     lane->priv->lane1_phy_regs :
-+				     lane->priv->lane0_phy_regs;
-+
-+		comphy_reg_set16(base + COMPHY_LANE_REG_DIRECT(reg),
-+				 data, mask);
-+	}
-+}
-+
-+static int comphy_lane_reg_poll(struct mvebu_a3700_comphy_lane *lane,
-+				u16 reg, u16 bits,
-+				ulong sleep_us, ulong timeout_us)
-+{
-+	int ret;
-+
-+	if (lane->id == 2) {
-+		u32 data;
-+
-+		/* lane 2 PHY registers are accessed indirectly */
-+		writel(reg + COMPHY_LANE2_REGS_BASE,
-+		       lane->priv->lane2_phy_indirect +
-+		       COMPHY_LANE2_INDIR_ADDR);
-+
-+		ret = readl_poll_timeout(lane->priv->lane2_phy_indirect +
-+					 COMPHY_LANE2_INDIR_DATA,
-+					 data, (data & bits) == bits,
-+					 sleep_us, timeout_us);
-+	} else {
-+		void __iomem *base = lane->id == 1 ?
-+				     lane->priv->lane1_phy_regs :
-+				     lane->priv->lane0_phy_regs;
-+		u16 data;
-+
-+		ret = readw_poll_timeout(base + COMPHY_LANE_REG_DIRECT(reg),
-+					 data, (data & bits) == bits,
-+					 sleep_us, timeout_us);
-+	}
-+
-+	return ret;
-+}
-+
-+static void comphy_periph_reg_set(struct mvebu_a3700_comphy_lane *lane,
-+				  u8 reg, u32 data, u32 mask)
-+{
-+	comphy_reg_set(lane->priv->comphy_regs + COMPHY_PHY_REG(lane->id, reg),
-+		       data, mask);
-+}
-+
-+static int comphy_periph_reg_poll(struct mvebu_a3700_comphy_lane *lane,
-+				  u8 reg, u32 bits,
-+				  ulong sleep_us, ulong timeout_us)
-+{
-+	u32 data;
-+
-+	return readl_poll_timeout(lane->priv->comphy_regs +
-+				  COMPHY_PHY_REG(lane->id, reg),
-+				  data, (data & bits) == bits,
-+				  sleep_us, timeout_us);
-+}
-+
-+/* PHY selector configures with corresponding modes */
-+static int
-+mvebu_a3700_comphy_set_phy_selector(struct mvebu_a3700_comphy_lane *lane)
-+{
-+	u32 old, new, clr = 0, set = 0;
-+	unsigned long flags;
-+
-+	switch (lane->mode) {
-+	case PHY_MODE_SATA:
-+		/* SATA must be in Lane2 */
-+		if (lane->id == 2)
-+			clr = COMPHY_SELECTOR_USB3_PHY_SEL_BIT;
-+		else
-+			goto error;
-+		break;
-+
-+	case PHY_MODE_ETHERNET:
-+		if (lane->id == 0)
-+			clr = COMPHY_SELECTOR_USB3_GBE1_SEL_BIT;
-+		else if (lane->id == 1)
-+			clr = COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT;
-+		else
-+			goto error;
-+		break;
-+
-+	case PHY_MODE_USB_HOST_SS:
-+		if (lane->id == 2)
-+			set = COMPHY_SELECTOR_USB3_PHY_SEL_BIT;
-+		else if (lane->id == 0)
-+			set = COMPHY_SELECTOR_USB3_GBE1_SEL_BIT;
-+		else
-+			goto error;
-+		break;
-+
-+	case PHY_MODE_PCIE:
-+		/* PCIE must be in Lane1 */
-+		if (lane->id == 1)
-+			set = COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT;
-+		else
-+			goto error;
-+		break;
-+
-+	default:
-+		goto error;
-+	}
-+
-+	spin_lock_irqsave(&lane->priv->lock, flags);
-+
-+	old = readl(lane->priv->comphy_regs + COMPHY_SELECTOR_PHY_REG);
-+	new = (old & ~clr) | set;
-+	writel(new, lane->priv->comphy_regs + COMPHY_SELECTOR_PHY_REG);
-+
-+	spin_unlock_irqrestore(&lane->priv->lock, flags);
-+
-+	dev_dbg(lane->dev,
-+		"COMPHY[%d] mode[%d] changed PHY selector 0x%08x -> 0x%08x\n",
-+		lane->id, lane->mode, old, new);
-+
-+	return 0;
-+error:
-+	dev_err(lane->dev, "COMPHY[%d] mode[%d] is invalid\n", lane->id,
-+		lane->mode);
-+	return -EINVAL;
-+}
-+
-+static int
-+mvebu_a3700_comphy_sata_power_on(struct mvebu_a3700_comphy_lane *lane)
-+{
-+	u32 mask, data, ref_clk;
-+	int ret;
-+
-+	/* Configure phy selector for SATA */
-+	ret = mvebu_a3700_comphy_set_phy_selector(lane);
-+	if (ret)
-+		return ret;
-+
-+	/* Clear phy isolation mode to make it work in normal mode */
-+	comphy_lane_reg_set(lane, COMPHY_ISOLATION_CTRL,
-+			    0x0, PHY_ISOLATE_MODE);
-+
-+	/* 0. Check the Polarity invert bits */
-+	data = 0x0;
-+	if (lane->invert_tx)
-+		data |= TXD_INVERT_BIT;
-+	if (lane->invert_rx)
-+		data |= RXD_INVERT_BIT;
-+	mask = TXD_INVERT_BIT | RXD_INVERT_BIT;
-+	comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask);
-+
-+	/* 1. Select 40-bit data width */
-+	comphy_lane_reg_set(lane, COMPHY_DIG_LOOPBACK_EN,
-+			    DATA_WIDTH_40BIT, SEL_DATA_WIDTH_MASK);
-+
-+	/* 2. Select reference clock(25M) and PHY mode (SATA) */
-+	if (lane->priv->xtal_is_40m)
-+		ref_clk = REF_FREF_SEL_SERDES_40MHZ;
-+	else
-+		ref_clk = REF_FREF_SEL_SERDES_25MHZ;
-+
-+	data = ref_clk | COMPHY_MODE_SATA;
-+	mask = REF_FREF_SEL_MASK | COMPHY_MODE_MASK;
-+	comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask);
-+
-+	/* 3. Use maximum PLL rate (no power save) */
-+	comphy_lane_reg_set(lane, COMPHY_KVCO_CAL_CTRL,
-+			    USE_MAX_PLL_RATE_BIT, USE_MAX_PLL_RATE_BIT);
-+
-+	/* 4. Reset reserved bit */
-+	comphy_set_indirect(lane->priv, COMPHY_RESERVED_REG,
-+			    0x0, PHYCTRL_FRM_PIN_BIT);
-+
-+	/* 5. Set vendor-specific configuration (It is done in sata driver) */
-+	/* XXX: in U-Boot below sequence was executed in this place, in Linux
-+	 * not.  Now it is done only in U-Boot before this comphy
-+	 * initialization - tests shows that it works ok, but in case of any
-+	 * future problem it is left for reference.
-+	 *   reg_set(MVEBU_REGS_BASE + 0xe00a0, 0, 0xffffffff);
-+	 *   reg_set(MVEBU_REGS_BASE + 0xe00a4, BIT(6), BIT(6));
-+	 */
-+
-+	/* Wait for > 55 us to allow PLL be enabled */
-+	udelay(PLL_SET_DELAY_US);
-+
-+	/* Polling status */
-+	ret = comphy_lane_reg_poll(lane, COMPHY_DIG_LOOPBACK_EN,
-+				   PLL_READY_TX_BIT, COMPHY_PLL_SLEEP,
-+				   COMPHY_PLL_TIMEOUT);
-+	if (ret) {
-+		dev_err(lane->dev, "Failed to lock SATA PLL\n");
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static void comphy_gbe_phy_init(struct mvebu_a3700_comphy_lane *lane,
-+				bool is_1gbps)
-+{
-+	int addr, fix_idx;
-+	u16 val;
-+
-+	fix_idx = 0;
-+	for (addr = 0; addr < 512; addr++) {
-+		/*
-+		 * All PHY register values are defined in full for 3.125Gbps
-+		 * SERDES speed. The values required for 1.25 Gbps are almost
-+		 * the same and only few registers should be "fixed" in
-+		 * comparison to 3.125 Gbps values. These register values are
-+		 * stored in "gbe_phy_init_fix" array.
-+		 */
-+		if (!is_1gbps && gbe_phy_init_fix[fix_idx].addr == addr) {
-+			/* Use new value */
-+			val = gbe_phy_init_fix[fix_idx].value;
-+			if (fix_idx < ARRAY_SIZE(gbe_phy_init_fix))
-+				fix_idx++;
-+		} else {
-+			val = gbe_phy_init[addr];
-+		}
-+
-+		comphy_lane_reg_set(lane, addr, val, 0xFFFF);
-+	}
-+}
-+
-+static int
-+mvebu_a3700_comphy_ethernet_power_on(struct mvebu_a3700_comphy_lane *lane)
-+{
-+	u32 mask, data, speed_sel;
-+	int ret;
-+
-+	/* Set selector */
-+	ret = mvebu_a3700_comphy_set_phy_selector(lane);
-+	if (ret)
-+		return ret;
-+
-+	/*
-+	 * 1. Reset PHY by setting PHY input port PIN_RESET=1.
-+	 * 2. Set PHY input port PIN_TX_IDLE=1, PIN_PU_IVREF=1 to keep
-+	 *    PHY TXP/TXN output to idle state during PHY initialization
-+	 * 3. Set PHY input port PIN_PU_PLL=0, PIN_PU_RX=0, PIN_PU_TX=0.
-+	 */
-+	data = PIN_PU_IVREF_BIT | PIN_TX_IDLE_BIT | PIN_RESET_COMPHY_BIT;
-+	mask = data | PIN_RESET_CORE_BIT | PIN_PU_PLL_BIT | PIN_PU_RX_BIT |
-+	       PIN_PU_TX_BIT | PHY_RX_INIT_BIT;
-+	comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask);
-+
-+	/* 4. Release reset to the PHY by setting PIN_RESET=0. */
-+	data = 0x0;
-+	mask = PIN_RESET_COMPHY_BIT;
-+	comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask);
-+
-+	/*
-+	 * 5. Set PIN_PHY_GEN_TX[3:0] and PIN_PHY_GEN_RX[3:0] to decide COMPHY
-+	 * bit rate
-+	 */
-+	switch (lane->submode) {
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_1000BASEX:
-+		/* SGMII 1G, SerDes speed 1.25G */
-+		speed_sel = SERDES_SPEED_1_25_G;
-+		break;
-+	case PHY_INTERFACE_MODE_2500BASEX:
-+		/* 2500Base-X, SerDes speed 3.125G */
-+		speed_sel = SERDES_SPEED_3_125_G;
-+		break;
- 	default:
-+		/* Other rates are not supported */
-+		dev_err(lane->dev,
-+			"unsupported phy speed %d on comphy lane%d\n",
-+			lane->submode, lane->id);
- 		return -EINVAL;
- 	}
-+	data = GEN_RX_SEL_VALUE(speed_sel) | GEN_TX_SEL_VALUE(speed_sel);
-+	mask = GEN_RX_SEL_MASK | GEN_TX_SEL_MASK;
-+	comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask);
-+
-+	/*
-+	 * 6. Wait 10mS for bandgap and reference clocks to stabilize; then
-+	 * start SW programming.
-+	 */
-+	mdelay(10);
-+
-+	/* 7. Program COMPHY register PHY_MODE */
-+	data = COMPHY_MODE_SERDES;
-+	mask = COMPHY_MODE_MASK;
-+	comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask);
-+
-+	/*
-+	 * 8. Set COMPHY register REFCLK_SEL to select the correct REFCLK
-+	 * source
-+	 */
-+	data = 0x0;
-+	mask = PHY_REF_CLK_SEL;
-+	comphy_lane_reg_set(lane, COMPHY_MISC_CTRL0, data, mask);
-+
-+	/*
-+	 * 9. Set correct reference clock frequency in COMPHY register
-+	 * REF_FREF_SEL.
-+	 */
-+	if (lane->priv->xtal_is_40m)
-+		data = REF_FREF_SEL_SERDES_50MHZ;
-+	else
-+		data = REF_FREF_SEL_SERDES_25MHZ;
-+
-+	mask = REF_FREF_SEL_MASK;
-+	comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask);
-+
-+	/* 10. Program COMPHY register PHY_GEN_MAX[1:0]
-+	 * This step is mentioned in the flow received from verification team.
-+	 * However the PHY_GEN_MAX value is only meaningful for other interfaces
-+	 * (not SERDES). For instance, it selects SATA speed 1.5/3/6 Gbps or
-+	 * PCIe speed 2.5/5 Gbps
-+	 */
-+
-+	/*
-+	 * 11. Program COMPHY register SEL_BITS to set correct parallel data
-+	 * bus width
-+	 */
-+	data = DATA_WIDTH_10BIT;
-+	mask = SEL_DATA_WIDTH_MASK;
-+	comphy_lane_reg_set(lane, COMPHY_DIG_LOOPBACK_EN, data, mask);
-+
-+	/*
-+	 * 12. As long as DFE function needs to be enabled in any mode,
-+	 * COMPHY register DFE_UPDATE_EN[5:0] shall be programmed to 0x3F
-+	 * for real chip during COMPHY power on.
-+	 * The step 14 exists (and empty) in the original initialization flow
-+	 * obtained from the verification team. According to the functional
-+	 * specification DFE_UPDATE_EN already has the default value 0x3F
-+	 */
-+
-+	/*
-+	 * 13. Program COMPHY GEN registers.
-+	 * These registers should be programmed based on the lab testing result
-+	 * to achieve optimal performance. Please contact the CEA group to get
-+	 * the related GEN table during real chip bring-up. We only required to
-+	 * run though the entire registers programming flow defined by
-+	 * "comphy_gbe_phy_init" when the REF clock is 40 MHz. For REF clock
-+	 * 25 MHz the default values stored in PHY registers are OK.
-+	 */
-+	dev_dbg(lane->dev, "Running C-DPI phy init %s mode\n",
-+		lane->submode == PHY_INTERFACE_MODE_2500BASEX ? "2G5" : "1G");
-+	if (lane->priv->xtal_is_40m)
-+		comphy_gbe_phy_init(lane,
-+				    lane->submode != PHY_INTERFACE_MODE_2500BASEX);
-+
-+	/*
-+	 * 14. [Simulation Only] should not be used for real chip.
-+	 * By pass power up calibration by programming EXT_FORCE_CAL_DONE
-+	 * (R02h[9]) to 1 to shorten COMPHY simulation time.
-+	 */
-+
-+	/*
-+	 * 15. [Simulation Only: should not be used for real chip]
-+	 * Program COMPHY register FAST_DFE_TIMER_EN=1 to shorten RX training
-+	 * simulation time.
-+	 */
-+
-+	/*
-+	 * 16. Check the PHY Polarity invert bit
-+	 */
-+	data = 0x0;
-+	if (lane->invert_tx)
-+		data |= TXD_INVERT_BIT;
-+	if (lane->invert_rx)
-+		data |= RXD_INVERT_BIT;
-+	mask = TXD_INVERT_BIT | RXD_INVERT_BIT;
-+	comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask);
-+
-+	/*
-+	 * 17. Set PHY input ports PIN_PU_PLL, PIN_PU_TX and PIN_PU_RX to 1 to
-+	 * start PHY power up sequence. All the PHY register programming should
-+	 * be done before PIN_PU_PLL=1. There should be no register programming
-+	 * for normal PHY operation from this point.
-+	 */
-+	data = PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT;
-+	mask = data;
-+	comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask);
-+
-+	/*
-+	 * 18. Wait for PHY power up sequence to finish by checking output ports
-+	 * PIN_PLL_READY_TX=1 and PIN_PLL_READY_RX=1.
-+	 */
-+	ret = comphy_periph_reg_poll(lane, COMPHY_PHY_STAT1,
-+				     PHY_PLL_READY_TX_BIT |
-+				     PHY_PLL_READY_RX_BIT,
-+				     COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT);
-+	if (ret) {
-+		dev_err(lane->dev, "Failed to lock PLL for SERDES PHY %d\n",
-+			lane->id);
-+		return ret;
-+	}
-+
-+	/*
-+	 * 19. Set COMPHY input port PIN_TX_IDLE=0
-+	 */
-+	comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, 0x0, PIN_TX_IDLE_BIT);
-+
-+	/*
-+	 * 20. After valid data appear on PIN_RXDATA bus, set PIN_RX_INIT=1. To
-+	 * start RX initialization. PIN_RX_INIT_DONE will be cleared to 0 by the
-+	 * PHY After RX initialization is done, PIN_RX_INIT_DONE will be set to
-+	 * 1 by COMPHY Set PIN_RX_INIT=0 after PIN_RX_INIT_DONE= 1. Please
-+	 * refer to RX initialization part for details.
-+	 */
-+	comphy_periph_reg_set(lane, COMPHY_PHY_CFG1,
-+			      PHY_RX_INIT_BIT, PHY_RX_INIT_BIT);
-+
-+	ret = comphy_periph_reg_poll(lane, COMPHY_PHY_STAT1,
-+				     PHY_PLL_READY_TX_BIT |
-+				     PHY_PLL_READY_RX_BIT,
-+				     COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT);
-+	if (ret) {
-+		dev_err(lane->dev, "Failed to lock PLL for SERDES PHY %d\n",
-+			lane->id);
-+		return ret;
-+	}
-+
-+	ret = comphy_periph_reg_poll(lane, COMPHY_PHY_STAT1,
-+				     PHY_RX_INIT_DONE_BIT,
-+				     COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT);
-+	if (ret) {
-+		dev_err(lane->dev, "Failed to init RX of SERDES PHY %d\n",
-+			lane->id);
-+		return ret;
-+	}
-+
-+	return 0;
- }
- 
--static int mvebu_a3700_comphy_get_fw_mode(int lane,
-+static int
-+mvebu_a3700_comphy_usb3_power_on(struct mvebu_a3700_comphy_lane *lane)
-+{
-+	u32 mask, data, cfg, ref_clk;
-+	int ret;
-+
-+	/* Set phy seclector */
-+	ret = mvebu_a3700_comphy_set_phy_selector(lane);
-+	if (ret)
-+		return ret;
-+
-+	/*
-+	 * 0. Set PHY OTG Control(0x5d034), bit 4, Power up OTG module The
-+	 * register belong to UTMI module, so it is set in UTMI phy driver.
-+	 */
-+
-+	/*
-+	 * 1. Set PRD_TXDEEMPH (3.5db de-emph)
-+	 */
-+	data = PRD_TXDEEMPH0_MASK;
-+	mask = PRD_TXDEEMPH0_MASK | PRD_TXMARGIN_MASK | PRD_TXSWING_MASK |
-+	       CFG_TX_ALIGN_POS_MASK;
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG0, data, mask);
-+
-+	/*
-+	 * 2. Set BIT0: enable transmitter in high impedance mode
-+	 *    Set BIT[3:4]: delay 2 clock cycles for HiZ off latency
-+	 *    Set BIT6: Tx detect Rx at HiZ mode
-+	 *    Unset BIT15: set to 0 to set USB3 De-emphasize level to -3.5db
-+	 *            together with bit 0 of COMPHY_PIPE_LANE_CFG0 register
-+	 */
-+	data = TX_DET_RX_MODE | GEN2_TX_DATA_DLY_DEFT | TX_ELEC_IDLE_MODE_EN;
-+	mask = PRD_TXDEEMPH1_MASK | TX_DET_RX_MODE | GEN2_TX_DATA_DLY_MASK |
-+	       TX_ELEC_IDLE_MODE_EN;
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG1, data, mask);
-+
-+	/*
-+	 * 3. Set Spread Spectrum Clock Enabled
-+	 */
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG4,
-+			    SPREAD_SPECTRUM_CLK_EN, SPREAD_SPECTRUM_CLK_EN);
-+
-+	/*
-+	 * 4. Set Override Margining Controls From the MAC:
-+	 *    Use margining signals from lane configuration
-+	 */
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_TEST_MODE_CTRL,
-+			    MODE_MARGIN_OVERRIDE, 0xFFFF);
-+
-+	/*
-+	 * 5. Set Lane-to-Lane Bundle Clock Sampling Period = per PCLK cycles
-+	 *    set Mode Clock Source = PCLK is generated from REFCLK
-+	 */
-+	data = 0x0;
-+	mask = MODE_CLK_SRC | BUNDLE_PERIOD_SEL | BUNDLE_PERIOD_SCALE_MASK |
-+	       BUNDLE_SAMPLE_CTRL | PLL_READY_DLY_MASK;
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_CLK_SRC_LO, data, mask);
-+
-+	/*
-+	 * 6. Set G2 Spread Spectrum Clock Amplitude at 4K
-+	 */
-+	comphy_lane_reg_set(lane, COMPHY_GEN2_SET2,
-+			    GS2_TX_SSC_AMP_4128, GS2_TX_SSC_AMP_MASK);
-+
-+	/*
-+	 * 7. Unset G3 Spread Spectrum Clock Amplitude
-+	 *    set G3 TX and RX Register Master Current Select
-+	 */
-+	data = GS2_VREG_RXTX_MAS_ISET_60U;
-+	mask = GS2_TX_SSC_AMP_MASK | GS2_VREG_RXTX_MAS_ISET_MASK |
-+	       GS2_RSVD_6_0_MASK;
-+	comphy_lane_reg_set(lane, COMPHY_GEN3_SET2, data, mask);
-+
-+	/*
-+	 * 8. Check crystal jumper setting and program the Power and PLL Control
-+	 * accordingly Change RX wait
-+	 */
-+	if (lane->priv->xtal_is_40m) {
-+		ref_clk = REF_FREF_SEL_PCIE_USB3_40MHZ;
-+		cfg = CFG_PM_RXDLOZ_WAIT_12_UNIT;
-+	} else {
-+		ref_clk = REF_FREF_SEL_PCIE_USB3_25MHZ;
-+		cfg = CFG_PM_RXDLOZ_WAIT_7_UNIT;
-+	}
-+
-+	data = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT |
-+	       PU_TX_INTP_BIT | PU_DFE_BIT | COMPHY_MODE_USB3 | ref_clk;
-+	mask = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT |
-+	       PU_TX_INTP_BIT | PU_DFE_BIT | PLL_LOCK_BIT | COMPHY_MODE_MASK |
-+	       REF_FREF_SEL_MASK;
-+	comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask);
-+
-+	data = CFG_PM_RXDEN_WAIT_1_UNIT | cfg;
-+	mask = CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK |
-+	       CFG_PM_RXDLOZ_WAIT_MASK;
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_PWR_MGM_TIM1, data, mask);
-+
-+	/*
-+	 * 9. Enable idle sync
-+	 */
-+	comphy_lane_reg_set(lane, COMPHY_IDLE_SYNC_EN,
-+			    IDLE_SYNC_EN, IDLE_SYNC_EN);
-+
-+	/*
-+	 * 10. Enable the output of 500M clock
-+	 */
-+	comphy_lane_reg_set(lane, COMPHY_MISC_CTRL0, CLK500M_EN, CLK500M_EN);
-+
-+	/*
-+	 * 11. Set 20-bit data width
-+	 */
-+	comphy_lane_reg_set(lane, COMPHY_DIG_LOOPBACK_EN,
-+			    DATA_WIDTH_20BIT, 0xFFFF);
-+
-+	/*
-+	 * 12. Override Speed_PLL value and use MAC PLL
-+	 */
-+	data = SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT;
-+	mask = 0xFFFF;
-+	comphy_lane_reg_set(lane, COMPHY_KVCO_CAL_CTRL, data, mask);
-+
-+	/*
-+	 * 13. Check the Polarity invert bit
-+	 */
-+	data = 0x0;
-+	if (lane->invert_tx)
-+		data |= TXD_INVERT_BIT;
-+	if (lane->invert_rx)
-+		data |= RXD_INVERT_BIT;
-+	mask = TXD_INVERT_BIT | RXD_INVERT_BIT;
-+	comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask);
-+
-+	/*
-+	 * 14. Set max speed generation to USB3.0 5Gbps
-+	 */
-+	comphy_lane_reg_set(lane, COMPHY_SYNC_MASK_GEN,
-+			    PHY_GEN_MAX_USB3_5G, PHY_GEN_MAX_MASK);
-+
-+	/*
-+	 * 15. Set capacitor value for FFE gain peaking to 0xF
-+	 */
-+	comphy_lane_reg_set(lane, COMPHY_GEN2_SET3,
-+			    GS3_FFE_CAP_SEL_VALUE, GS3_FFE_CAP_SEL_MASK);
-+
-+	/*
-+	 * 16. Release SW reset
-+	 */
-+	data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32 | MODE_REFDIV_BY_4;
-+	mask = 0xFFFF;
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask);
-+
-+	/* Wait for > 55 us to allow PCLK be enabled */
-+	udelay(PLL_SET_DELAY_US);
-+
-+	ret = comphy_lane_reg_poll(lane, COMPHY_PIPE_LANE_STAT1, TXDCLK_PCLK_EN,
-+				   COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT);
-+	if (ret) {
-+		dev_err(lane->dev, "Failed to lock USB3 PLL\n");
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+mvebu_a3700_comphy_pcie_power_on(struct mvebu_a3700_comphy_lane *lane)
-+{
-+	u32 mask, data, ref_clk;
-+	int ret;
-+
-+	/* Configure phy selector for PCIe */
-+	ret = mvebu_a3700_comphy_set_phy_selector(lane);
-+	if (ret)
-+		return ret;
-+
-+	/* 1. Enable max PLL. */
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG1,
-+			    USE_MAX_PLL_RATE_EN, USE_MAX_PLL_RATE_EN);
-+
-+	/* 2. Select 20 bit SERDES interface. */
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_CLK_SRC_LO,
-+			    CFG_SEL_20B, CFG_SEL_20B);
-+
-+	/* 3. Force to use reg setting for PCIe mode */
-+	comphy_lane_reg_set(lane, COMPHY_MISC_CTRL1,
-+			    SEL_BITS_PCIE_FORCE, SEL_BITS_PCIE_FORCE);
-+
-+	/* 4. Change RX wait */
-+	data = CFG_PM_RXDEN_WAIT_1_UNIT | CFG_PM_RXDLOZ_WAIT_12_UNIT;
-+	mask = CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK |
-+	       CFG_PM_RXDLOZ_WAIT_MASK;
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_PWR_MGM_TIM1, data, mask);
-+
-+	/* 5. Enable idle sync */
-+	comphy_lane_reg_set(lane, COMPHY_IDLE_SYNC_EN,
-+			    IDLE_SYNC_EN, IDLE_SYNC_EN);
-+
-+	/* 6. Enable the output of 100M/125M/500M clock */
-+	data = CLK500M_EN | TXDCLK_2X_SEL | CLK100M_125M_EN;
-+	mask = data;
-+	comphy_lane_reg_set(lane, COMPHY_MISC_CTRL0, data, mask);
-+
-+	/*
-+	 * 7. Enable TX, PCIE global register, 0xd0074814, it is done in
-+	 * PCI-E driver
-+	 */
-+
-+	/*
-+	 * 8. Check crystal jumper setting and program the Power and PLL
-+	 * Control accordingly
-+	 */
-+
-+	if (lane->priv->xtal_is_40m)
-+		ref_clk = REF_FREF_SEL_PCIE_USB3_40MHZ;
-+	else
-+		ref_clk = REF_FREF_SEL_PCIE_USB3_25MHZ;
-+
-+	data = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT |
-+	       PU_TX_INTP_BIT | PU_DFE_BIT | COMPHY_MODE_PCIE | ref_clk;
-+	mask = 0xFFFF;
-+	comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask);
-+
-+	/* 9. Override Speed_PLL value and use MAC PLL */
-+	comphy_lane_reg_set(lane, COMPHY_KVCO_CAL_CTRL,
-+			    SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT,
-+			    0xFFFF);
-+
-+	/* 10. Check the Polarity invert bit */
-+	data = 0x0;
-+	if (lane->invert_tx)
-+		data |= TXD_INVERT_BIT;
-+	if (lane->invert_rx)
-+		data |= RXD_INVERT_BIT;
-+	mask = TXD_INVERT_BIT | RXD_INVERT_BIT;
-+	comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask);
-+
-+	/* 11. Release SW reset */
-+	data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32;
-+	mask = data | PIPE_SOFT_RESET | MODE_REFDIV_MASK;
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask);
-+
-+	/* Wait for > 55 us to allow PCLK be enabled */
-+	udelay(PLL_SET_DELAY_US);
-+
-+	ret = comphy_lane_reg_poll(lane, COMPHY_PIPE_LANE_STAT1, TXDCLK_PCLK_EN,
-+				   COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT);
-+	if (ret) {
-+		dev_err(lane->dev, "Failed to lock PCIE PLL\n");
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static void
-+mvebu_a3700_comphy_usb3_power_off(struct mvebu_a3700_comphy_lane *lane)
-+{
-+	/*
-+	 * Currently the USB3 MAC sets the USB3 PHY to low state, so we do not
-+	 * need to power off USB3 PHY again.
-+	 */
-+}
-+
-+static void
-+mvebu_a3700_comphy_sata_power_off(struct mvebu_a3700_comphy_lane *lane)
-+{
-+	/* Set phy isolation mode */
-+	comphy_lane_reg_set(lane, COMPHY_ISOLATION_CTRL,
-+			    PHY_ISOLATE_MODE, PHY_ISOLATE_MODE);
-+
-+	/* Power off PLL, Tx, Rx */
-+	comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL,
-+			    0x0, PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT);
-+}
-+
-+static void
-+mvebu_a3700_comphy_ethernet_power_off(struct mvebu_a3700_comphy_lane *lane)
-+{
-+	u32 mask, data;
-+
-+	data = PIN_RESET_CORE_BIT | PIN_RESET_COMPHY_BIT | PIN_PU_IVREF_BIT |
-+	       PHY_RX_INIT_BIT;
-+	mask = data;
-+	comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask);
-+}
-+
-+static void
-+mvebu_a3700_comphy_pcie_power_off(struct mvebu_a3700_comphy_lane *lane)
-+{
-+	/* Power off PLL, Tx, Rx */
-+	comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL,
-+			    0x0, PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT);
-+}
-+
-+static int mvebu_a3700_comphy_reset(struct phy *phy)
-+{
-+	struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
-+	u16 mask, data;
-+
-+	dev_dbg(lane->dev, "resetting lane %d\n", lane->id);
-+
-+	/* COMPHY reset for internal logic */
-+	comphy_lane_reg_set(lane, COMPHY_SFT_RESET,
-+			    SFT_RST_NO_REG, SFT_RST_NO_REG);
-+
-+	/* COMPHY register reset (cleared automatically) */
-+	comphy_lane_reg_set(lane, COMPHY_SFT_RESET, SFT_RST, SFT_RST);
-+
-+	/* PIPE soft and register reset */
-+	data = PIPE_SOFT_RESET | PIPE_REG_RESET;
-+	mask = data;
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask);
-+
-+	/* Release PIPE register reset */
-+	comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL,
-+			    0x0, PIPE_REG_RESET);
-+
-+	/* Reset SB configuration register (only for lanes 0 and 1) */
-+	if (lane->id == 0 || lane->id == 1) {
-+		u32 mask, data;
-+
-+		data = PIN_RESET_CORE_BIT | PIN_RESET_COMPHY_BIT |
-+		       PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT;
-+		mask = data | PIN_PU_IVREF_BIT | PIN_TX_IDLE_BIT;
-+		comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask);
-+	}
-+
-+	return 0;
-+}
-+
-+static bool mvebu_a3700_comphy_check_mode(int lane,
- 					  enum phy_mode mode,
- 					  int submode)
- {
-@@ -122,7 +1170,7 @@ static int mvebu_a3700_comphy_get_fw_mod
- 
- 	/* Unused PHY mux value is 0x0 */
- 	if (mode == PHY_MODE_INVALID)
--		return -EINVAL;
-+		return false;
- 
- 	for (i = 0; i < n; i++) {
- 		if (mvebu_a3700_comphy_modes[i].lane == lane &&
-@@ -132,27 +1180,30 @@ static int mvebu_a3700_comphy_get_fw_mod
- 	}
- 
- 	if (i == n)
--		return -EINVAL;
-+		return false;
- 
--	return mvebu_a3700_comphy_modes[i].fw_mode;
-+	return true;
- }
- 
- static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode,
- 				       int submode)
- {
- 	struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
--	int fw_mode;
--
--	if (submode == PHY_INTERFACE_MODE_1000BASEX)
--		submode = PHY_INTERFACE_MODE_SGMII;
- 
--	fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, mode,
--						 submode);
--	if (fw_mode < 0) {
-+	if (!mvebu_a3700_comphy_check_mode(lane->id, mode, submode)) {
- 		dev_err(lane->dev, "invalid COMPHY mode\n");
--		return fw_mode;
-+		return -EINVAL;
- 	}
- 
-+	/* Mode cannot be changed while the PHY is powered on */
-+	if (phy->power_count &&
-+	    (lane->mode != mode || lane->submode != submode))
-+		return -EBUSY;
-+
-+	/* If changing mode, ensure reset is called */
-+	if (lane->mode != PHY_MODE_INVALID && lane->mode != mode)
-+		lane->needs_reset = true;
-+
- 	/* Just remember the mode, ->power_on() will do the real setup */
- 	lane->mode = mode;
- 	lane->submode = submode;
-@@ -163,76 +1214,68 @@ static int mvebu_a3700_comphy_set_mode(s
- static int mvebu_a3700_comphy_power_on(struct phy *phy)
- {
- 	struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
--	u32 fw_param;
--	int fw_mode;
--	int fw_port;
- 	int ret;
- 
--	fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id,
--						 lane->mode, lane->submode);
--	if (fw_mode < 0) {
-+	if (!mvebu_a3700_comphy_check_mode(lane->id, lane->mode,
-+					   lane->submode)) {
- 		dev_err(lane->dev, "invalid COMPHY mode\n");
--		return fw_mode;
-+		return -EINVAL;
-+	}
-+
-+	if (lane->needs_reset) {
-+		ret = mvebu_a3700_comphy_reset(phy);
-+		if (ret)
-+			return ret;
-+
-+		lane->needs_reset = false;
- 	}
- 
- 	switch (lane->mode) {
- 	case PHY_MODE_USB_HOST_SS:
- 		dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id);
--		fw_param = COMPHY_FW_MODE(fw_mode);
--		break;
-+		return mvebu_a3700_comphy_usb3_power_on(lane);
- 	case PHY_MODE_SATA:
- 		dev_dbg(lane->dev, "set lane %d to SATA mode\n", lane->id);
--		fw_param = COMPHY_FW_MODE(fw_mode);
--		break;
-+		return mvebu_a3700_comphy_sata_power_on(lane);
- 	case PHY_MODE_ETHERNET:
--		fw_port = (lane->id == 0) ? 1 : 0;
--		switch (lane->submode) {
--		case PHY_INTERFACE_MODE_SGMII:
--			dev_dbg(lane->dev, "set lane %d to SGMII mode\n",
--				lane->id);
--			fw_param = COMPHY_FW_NET(fw_mode, fw_port,
--						 COMPHY_FW_SPEED_1_25G);
--			break;
--		case PHY_INTERFACE_MODE_2500BASEX:
--			dev_dbg(lane->dev, "set lane %d to 2500BASEX mode\n",
--				lane->id);
--			fw_param = COMPHY_FW_NET(fw_mode, fw_port,
--						 COMPHY_FW_SPEED_3_125G);
--			break;
--		default:
--			dev_err(lane->dev, "unsupported PHY submode (%d)\n",
--				lane->submode);
--			return -ENOTSUPP;
--		}
--		break;
-+		dev_dbg(lane->dev, "set lane %d to Ethernet mode\n", lane->id);
-+		return mvebu_a3700_comphy_ethernet_power_on(lane);
- 	case PHY_MODE_PCIE:
- 		dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id);
--		fw_param = COMPHY_FW_PCIE(fw_mode, COMPHY_FW_SPEED_5G,
--					  phy->attrs.bus_width);
--		break;
-+		return mvebu_a3700_comphy_pcie_power_on(lane);
- 	default:
- 		dev_err(lane->dev, "unsupported PHY mode (%d)\n", lane->mode);
--		return -ENOTSUPP;
-+		return -EOPNOTSUPP;
- 	}
--
--	ret = mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param);
--	if (ret == -EOPNOTSUPP)
--		dev_err(lane->dev,
--			"unsupported SMC call, try updating your firmware\n");
--
--	return ret;
- }
- 
- static int mvebu_a3700_comphy_power_off(struct phy *phy)
- {
- 	struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
- 
--	return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_OFF, lane->id, 0);
-+	switch (lane->mode) {
-+	case PHY_MODE_USB_HOST_SS:
-+		mvebu_a3700_comphy_usb3_power_off(lane);
-+		return 0;
-+	case PHY_MODE_SATA:
-+		mvebu_a3700_comphy_sata_power_off(lane);
-+		return 0;
-+	case PHY_MODE_ETHERNET:
-+		mvebu_a3700_comphy_ethernet_power_off(lane);
-+		return 0;
-+	case PHY_MODE_PCIE:
-+		mvebu_a3700_comphy_pcie_power_off(lane);
-+		return 0;
-+	default:
-+		dev_err(lane->dev, "invalid COMPHY mode\n");
-+		return -EINVAL;
-+	}
- }
- 
- static const struct phy_ops mvebu_a3700_comphy_ops = {
- 	.power_on	= mvebu_a3700_comphy_power_on,
- 	.power_off	= mvebu_a3700_comphy_power_off,
-+	.reset		= mvebu_a3700_comphy_reset,
- 	.set_mode	= mvebu_a3700_comphy_set_mode,
- 	.owner		= THIS_MODULE,
- };
-@@ -256,13 +1299,75 @@ static struct phy *mvebu_a3700_comphy_xl
- 		return ERR_PTR(-EINVAL);
- 	}
- 
-+	lane->invert_tx = args->args[1] & BIT(0);
-+	lane->invert_rx = args->args[1] & BIT(1);
-+
- 	return phy;
- }
- 
- static int mvebu_a3700_comphy_probe(struct platform_device *pdev)
- {
-+	struct mvebu_a3700_comphy_priv *priv;
- 	struct phy_provider *provider;
- 	struct device_node *child;
-+	struct resource *res;
-+	struct clk *clk;
-+	int ret;
-+
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	spin_lock_init(&priv->lock);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "comphy");
-+	priv->comphy_regs = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(priv->comphy_regs))
-+		return PTR_ERR(priv->comphy_regs);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+					   "lane1_pcie_gbe");
-+	priv->lane1_phy_regs = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(priv->lane1_phy_regs))
-+		return PTR_ERR(priv->lane1_phy_regs);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+					   "lane0_usb3_gbe");
-+	priv->lane0_phy_regs = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(priv->lane0_phy_regs))
-+		return PTR_ERR(priv->lane0_phy_regs);
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+					   "lane2_sata_usb3");
-+	priv->lane2_phy_indirect = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(priv->lane2_phy_indirect))
-+		return PTR_ERR(priv->lane2_phy_indirect);
-+
-+	/*
-+	 * Driver needs to know if reference xtal clock is 40MHz or 25MHz.
-+	 * Old DT bindings do not have xtal clk present. So do not fail here
-+	 * and expects that default 25MHz reference clock is used.
-+	 */
-+	clk = clk_get(&pdev->dev, "xtal");
-+	if (IS_ERR(clk)) {
-+		if (PTR_ERR(clk) == -EPROBE_DEFER)
-+			return -EPROBE_DEFER;
-+		dev_warn(&pdev->dev, "missing 'xtal' clk (%ld)\n",
-+			 PTR_ERR(clk));
-+	} else {
-+		ret = clk_prepare_enable(clk);
-+		if (ret) {
-+			dev_warn(&pdev->dev, "enabling xtal clk failed (%d)\n",
-+				 ret);
-+		} else {
-+			if (clk_get_rate(clk) == 40000000)
-+				priv->xtal_is_40m = true;
-+			clk_disable_unprepare(clk);
-+		}
-+		clk_put(clk);
-+	}
-+
-+	dev_set_drvdata(&pdev->dev, priv);
- 
- 	for_each_available_child_of_node(pdev->dev.of_node, child) {
- 		struct mvebu_a3700_comphy_lane *lane;
-@@ -277,7 +1382,7 @@ static int mvebu_a3700_comphy_probe(stru
- 			continue;
- 		}
- 
--		if (lane_id >= MVEBU_A3700_COMPHY_LANES) {
-+		if (lane_id >= 3) {
- 			dev_err(&pdev->dev, "invalid 'reg' property\n");
- 			continue;
- 		}
-@@ -295,11 +1400,21 @@ static int mvebu_a3700_comphy_probe(stru
- 			return PTR_ERR(phy);
- 		}
- 
-+		lane->priv = priv;
- 		lane->dev = &pdev->dev;
- 		lane->mode = PHY_MODE_INVALID;
- 		lane->submode = PHY_INTERFACE_MODE_NA;
- 		lane->id = lane_id;
-+		lane->invert_tx = false;
-+		lane->invert_rx = false;
- 		phy_set_drvdata(phy, lane);
-+
-+		/*
-+		 * To avoid relying on the bootloader/firmware configuration,
-+		 * power off all comphys.
-+		 */
-+		mvebu_a3700_comphy_reset(phy);
-+		lane->needs_reset = false;
- 	}
- 
- 	provider = devm_of_phy_provider_register(&pdev->dev,
-@@ -323,5 +1438,7 @@ static struct platform_driver mvebu_a370
- module_platform_driver(mvebu_a3700_comphy_driver);
- 
- MODULE_AUTHOR("Miquèl Raynal <miquel.raynal@bootlin.com>");
-+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
-+MODULE_AUTHOR("Marek Behún <kabel@kernel.org>");
- MODULE_DESCRIPTION("Common PHY driver for A3700");
- MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/pending-5.10/851-0003-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch b/target/linux/generic/pending-5.10/851-0003-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch
deleted file mode 100644
index 33203a154ddf..000000000000
--- a/target/linux/generic/pending-5.10/851-0003-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 66c51c39fd4bf05e99debf0e71de5704231c57dc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 23 Sep 2021 19:26:26 +0200
-Subject: [PATCH] arm64: dts: marvell: armada-37xx: Add xtal clock to comphy
- node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Kernel driver phy-mvebu-a3700-comphy.c needs to know the rate of the
-reference xtal clock. So add missing xtal clock source into comphy device
-tree node. If the property is not present, the driver defaults to 25 MHz
-xtal rate (which, as far as we know, is used by all the existing boards).
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -265,6 +265,8 @@
- 					    "lane2_sata_usb3";
- 				#address-cells = <1>;
- 				#size-cells = <0>;
-+				clocks = <&xtalclk>;
-+				clock-names = "xtal";
- 
- 				comphy0: phy@0 {
- 					reg = <0>;
diff --git a/target/linux/generic/pending-5.10/851-0004-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch b/target/linux/generic/pending-5.10/851-0004-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch
deleted file mode 100644
index 3c994d254894..000000000000
--- a/target/linux/generic/pending-5.10/851-0004-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 750bb44dbbe9dfb4ba3e1f8a746b831b39ba3cd9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 23 Sep 2021 19:35:57 +0200
-Subject: [PATCH] Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada
- 3720"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit 45aefe3d2251e4e229d7662052739f96ad1d08d9.
-
-Armada 3720 PHY driver (phy-mvebu-a3700-comphy.c) does not return
--EOPNOTSUPP from phy_power_on() callback anymore.
-
-So remove AHCI_HFLAG_IGN_NOTSUPP_POWER_ON flag from Armada 3720 plat data.
-
-AHCI_HFLAG_IGN_NOTSUPP_POWER_ON is not used by any other ahci driver, so
-remove this flag completely.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/ata/ahci.h             | 2 --
- drivers/ata/ahci_mvebu.c       | 2 +-
- drivers/ata/libahci_platform.c | 2 +-
- 3 files changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/ata/ahci.h
-+++ b/drivers/ata/ahci.h
-@@ -240,8 +240,6 @@ enum {
- 							as default lpm_policy */
- 	AHCI_HFLAG_SUSPEND_PHYS		= (1 << 26), /* handle PHYs during
- 							suspend/resume */
--	AHCI_HFLAG_IGN_NOTSUPP_POWER_ON	= (1 << 27), /* ignore -EOPNOTSUPP
--							from phy_power_on() */
- 	AHCI_HFLAG_NO_SXS		= (1 << 28), /* SXS not supported */
- 
- 	/* ap->flags bits */
---- a/drivers/ata/ahci_mvebu.c
-+++ b/drivers/ata/ahci_mvebu.c
-@@ -227,7 +227,7 @@ static const struct ahci_mvebu_plat_data
- 
- static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = {
- 	.plat_config = ahci_mvebu_armada_3700_config,
--	.flags = AHCI_HFLAG_SUSPEND_PHYS | AHCI_HFLAG_IGN_NOTSUPP_POWER_ON,
-+	.flags = AHCI_HFLAG_SUSPEND_PHYS,
- };
- 
- static const struct of_device_id ahci_mvebu_of_match[] = {
---- a/drivers/ata/libahci_platform.c
-+++ b/drivers/ata/libahci_platform.c
-@@ -59,7 +59,7 @@ int ahci_platform_enable_phys(struct ahc
- 		}
- 
- 		rc = phy_power_on(hpriv->phys[i]);
--		if (rc && !(rc == -EOPNOTSUPP && (hpriv->flags & AHCI_HFLAG_IGN_NOTSUPP_POWER_ON))) {
-+		if (rc) {
- 			phy_exit(hpriv->phys[i]);
- 			goto disable_phys;
- 		}
diff --git a/target/linux/generic/pending-5.10/851-0005-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch b/target/linux/generic/pending-5.10/851-0005-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch
deleted file mode 100644
index b8a3e880ced9..000000000000
--- a/target/linux/generic/pending-5.10/851-0005-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch
+++ /dev/null
@@ -1,163 +0,0 @@
-From 9f0dfb279b1dd505d5e10b10e4a78a62030978d8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 23 Sep 2021 19:40:06 +0200
-Subject: [PATCH] Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for
- Armada 3720"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit 3241929b67d28c83945d3191c6816a3271fd6b85.
-
-Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return
--EOPNOTSUPP from phy_power_on() callback anymore.
-
-So remove XHCI_SKIP_PHY_INIT flag from xhci_mvebu_a3700_plat_setup() and
-then also whole xhci_mvebu_a3700_plat_setup() function which is there just
-to handle -EOPNOTSUPP for XHCI_SKIP_PHY_INIT.
-
-xhci plat_setup callback is not used by any other xhci plat driver, so
-remove this callback completely.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/usb/host/xhci-mvebu.c | 42 -----------------------------------
- drivers/usb/host/xhci-mvebu.h |  6 -----
- drivers/usb/host/xhci-plat.c  | 20 +----------------
- drivers/usb/host/xhci-plat.h  |  1 -
- 4 files changed, 1 insertion(+), 68 deletions(-)
-
---- a/drivers/usb/host/xhci-mvebu.c
-+++ b/drivers/usb/host/xhci-mvebu.c
-@@ -8,7 +8,6 @@
- #include <linux/mbus.h>
- #include <linux/of.h>
- #include <linux/platform_device.h>
--#include <linux/phy/phy.h>
- 
- #include <linux/usb.h>
- #include <linux/usb/hcd.h>
-@@ -74,47 +73,6 @@ int xhci_mvebu_mbus_init_quirk(struct us
- 
- 	return 0;
- }
--
--int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd)
--{
--	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
--	struct device *dev = hcd->self.controller;
--	struct phy *phy;
--	int ret;
--
--	/* Old bindings miss the PHY handle */
--	phy = of_phy_get(dev->of_node, "usb3-phy");
--	if (IS_ERR(phy) && PTR_ERR(phy) == -EPROBE_DEFER)
--		return -EPROBE_DEFER;
--	else if (IS_ERR(phy))
--		goto phy_out;
--
--	ret = phy_init(phy);
--	if (ret)
--		goto phy_put;
--
--	ret = phy_set_mode(phy, PHY_MODE_USB_HOST_SS);
--	if (ret)
--		goto phy_exit;
--
--	ret = phy_power_on(phy);
--	if (ret == -EOPNOTSUPP) {
--		/* Skip initializatin of XHCI PHY when it is unsupported by firmware */
--		dev_warn(dev, "PHY unsupported by firmware\n");
--		xhci->quirks |= XHCI_SKIP_PHY_INIT;
--	}
--	if (ret)
--		goto phy_exit;
--
--	phy_power_off(phy);
--phy_exit:
--	phy_exit(phy);
--phy_put:
--	of_phy_put(phy);
--phy_out:
--
--	return 0;
--}
- 
- int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
- {
---- a/drivers/usb/host/xhci-mvebu.h
-+++ b/drivers/usb/host/xhci-mvebu.h
-@@ -12,18 +12,12 @@ struct usb_hcd;
- 
- #if IS_ENABLED(CONFIG_USB_XHCI_MVEBU)
- int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd);
--int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd);
- int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd);
- #else
- static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd)
- {
- 	return 0;
- }
--
--static inline int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd)
--{
--	return 0;
--}
- 
- static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
- {
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -44,16 +44,6 @@ static void xhci_priv_plat_start(struct
- 		priv->plat_start(hcd);
- }
- 
--static int xhci_priv_plat_setup(struct usb_hcd *hcd)
--{
--	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
--
--	if (!priv->plat_setup)
--		return 0;
--
--	return priv->plat_setup(hcd);
--}
--
- static int xhci_priv_init_quirk(struct usb_hcd *hcd)
- {
- 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
-@@ -121,7 +111,6 @@ static const struct xhci_plat_priv xhci_
- };
- 
- static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
--	.plat_setup = xhci_mvebu_a3700_plat_setup,
- 	.init_quirk = xhci_mvebu_a3700_init_quirk,
- };
- 
-@@ -341,14 +330,7 @@ static int xhci_plat_probe(struct platfo
- 
- 	hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
- 	xhci->shared_hcd->tpl_support = hcd->tpl_support;
--
--	if (priv) {
--		ret = xhci_priv_plat_setup(hcd);
--		if (ret)
--			goto disable_usb_phy;
--	}
--
--	if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)))
-+	if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
- 		hcd->skip_phy_initialization = 1;
- 
- 	if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK))
---- a/drivers/usb/host/xhci-plat.h
-+++ b/drivers/usb/host/xhci-plat.h
-@@ -13,7 +13,6 @@
- struct xhci_plat_priv {
- 	const char *firmware_name;
- 	unsigned long long quirks;
--	int (*plat_setup)(struct usb_hcd *);
- 	void (*plat_start)(struct usb_hcd *);
- 	int (*init_quirk)(struct usb_hcd *);
- 	int (*suspend_quirk)(struct usb_hcd *);
diff --git a/target/linux/generic/pending-5.10/851-0006-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch b/target/linux/generic/pending-5.10/851-0006-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch
deleted file mode 100644
index 3ac92698124b..000000000000
--- a/target/linux/generic/pending-5.10/851-0006-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 9a352062b7e3857742389dff6f64393481dc755e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 23 Sep 2021 19:37:05 +0200
-Subject: [PATCH] Revert "PCI: aardvark: Fix initialization with old Marvell's
- Arm Trusted Firmware"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit b0c6ae0f8948a2be6bf4e8b4bbab9ca1343289b6.
-
-Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return
--EOPNOTSUPP from phy_power_on() callback anymore.
-
-So remove dead code which handles -EOPNOTSUPP return value.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/pci/controller/pci-aardvark.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1634,9 +1634,7 @@ static int advk_pcie_enable_phy(struct a
- 	}
- 
- 	ret = phy_power_on(pcie->phy);
--	if (ret == -EOPNOTSUPP) {
--		dev_warn(&pcie->pdev->dev, "PHY unsupported by firmware\n");
--	} else if (ret) {
-+	if (ret) {
- 		phy_exit(pcie->phy);
- 		return ret;
- 	}
diff --git a/target/linux/generic/pending-5.10/920-mangle_bootargs.patch b/target/linux/generic/pending-5.10/920-mangle_bootargs.patch
deleted file mode 100644
index 390152078f5b..000000000000
--- a/target/linux/generic/pending-5.10/920-mangle_bootargs.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From: Imre Kaloz <kaloz@openwrt.org>
-Subject: init: add CONFIG_MANGLE_BOOTARGS and disable it by default
-
-Enabling this option renames the bootloader supplied root=
-and rootfstype= variables, which might have to be know but
-would break the automatisms OpenWrt uses.
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- init/Kconfig |  9 +++++++++
- init/main.c  | 24 ++++++++++++++++++++++++
- 2 files changed, 33 insertions(+)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1817,6 +1817,15 @@ config EMBEDDED
- 	  an embedded system so certain expert options are available
- 	  for configuration.
- 
-+config MANGLE_BOOTARGS
-+	bool "Rename offending bootargs"
-+	depends on EXPERT
-+	help
-+	  Sometimes the bootloader passed bogus root= and rootfstype=
-+	  parameters to the kernel, and while you want to ignore them,
-+	  you need to know the values f.e. to support dual firmware
-+	  layouts on the flash.
-+
- config HAVE_PERF_EVENTS
- 	bool
- 	help
---- a/init/main.c
-+++ b/init/main.c
-@@ -608,6 +608,29 @@ static inline void setup_nr_cpu_ids(void
- static inline void smp_prepare_cpus(unsigned int maxcpus) { }
- #endif
- 
-+#ifdef CONFIG_MANGLE_BOOTARGS
-+static void __init mangle_bootargs(char *command_line)
-+{
-+	char *rootdev;
-+	char *rootfs;
-+
-+	rootdev = strstr(command_line, "root=/dev/mtdblock");
-+
-+	if (rootdev)
-+		strncpy(rootdev, "mangled_rootblock=", 18);
-+
-+	rootfs = strstr(command_line, "rootfstype");
-+
-+	if (rootfs)
-+		strncpy(rootfs, "mangled_fs", 10);
-+
-+}
-+#else
-+static void __init mangle_bootargs(char *command_line)
-+{
-+}
-+#endif
-+
- /*
-  * We need to store the untouched command line for future reference.
-  * We also need to store the touched command line since the parameter
-@@ -869,6 +892,7 @@ asmlinkage __visible void __init __no_sa
- 	pr_notice("%s", linux_banner);
- 	early_security_init();
- 	setup_arch(&command_line);
-+	mangle_bootargs(command_line);
- 	setup_boot_config(command_line);
- 	setup_command_line(command_line);
- 	setup_nr_cpu_ids();
diff --git a/target/linux/ipq806x/config-5.10 b/target/linux/ipq806x/config-5.10
deleted file mode 100644
index 1f1af06b29d2..000000000000
--- a/target/linux/ipq806x/config-5.10
+++ /dev/null
@@ -1,492 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_APQ_GCC_8084 is not set
-# CONFIG_APQ_MMCC_8084 is not set
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_IPQ40XX is not set
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-# CONFIG_ARCH_MDM9615 is not set
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-# CONFIG_ARM_CPU_TOPOLOGY is not set
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_MODULE_PLTS=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
-CONFIG_ARM_QCOM_CPUFREQ_KRAIT=y
-CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
-CONFIG_ARM_QCOM_SPM_CPUIDLE=y
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AT803X_PHY=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_QCOM=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE_OVERRIDE=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_QCOM=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DEV_QCOM_RNG=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEVFREQ_GOV_PASSIVE is not set
-# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
-# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
-# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
-# CONFIG_DEVFREQ_GOV_USERSPACE is not set
-# CONFIG_DEVFREQ_THERMAL is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-# CONFIG_DWMAC_GENERIC is not set
-CONFIG_DWMAC_IPQ806X=y
-# CONFIG_DWMAC_QCOM_ETHQOS is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HWMON=y
-CONFIG_HWSPINLOCK=y
-CONFIG_HWSPINLOCK_QCOM=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-# CONFIG_I2C_QCOM_CCI is not set
-CONFIG_I2C_QUP=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-# CONFIG_IPQ_APSS_PLL is not set
-# CONFIG_IPQ_GCC_4019 is not set
-# CONFIG_IPQ_GCC_6018 is not set
-CONFIG_IPQ_GCC_806X=y
-# CONFIG_IPQ_GCC_8074 is not set
-# CONFIG_IPQ_LCC_806X is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KPSS_XCC=y
-CONFIG_KRAITCC=y
-CONFIG_KRAIT_CLOCKS=y
-CONFIG_KRAIT_L2_ACCESSORS=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MDIO_IPQ8064=y
-# CONFIG_MDM_GCC_9615 is not set
-# CONFIG_MDM_LCC_9615 is not set
-CONFIG_MEMFD_CREATE=y
-# CONFIG_MFD_HI6421_SPMI is not set
-CONFIG_MFD_QCOM_RPM=y
-# CONFIG_MFD_SPMI_PMIC is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=16
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_QCOM_DML=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_MSM=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MSM_GCC_8660=y
-# CONFIG_MSM_GCC_8916 is not set
-# CONFIG_MSM_GCC_8939 is not set
-# CONFIG_MSM_GCC_8960 is not set
-# CONFIG_MSM_GCC_8974 is not set
-# CONFIG_MSM_GCC_8994 is not set
-# CONFIG_MSM_GCC_8996 is not set
-# CONFIG_MSM_GCC_8998 is not set
-# CONFIG_MSM_GPUCC_8998 is not set
-# CONFIG_MSM_IOMMU is not set
-# CONFIG_MSM_LCC_8960 is not set
-# CONFIG_MSM_MMCC_8960 is not set
-# CONFIG_MSM_MMCC_8974 is not set
-# CONFIG_MSM_MMCC_8996 is not set
-# CONFIG_MSM_MMCC_8998 is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_QCOM=y
-CONFIG_MTD_QCOMSMEM_PARTS=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_QCA8K=y
-CONFIG_NET_DSA_TAG_QCA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=2
-CONFIG_NVMEM=y
-CONFIG_NVMEM_QCOM_QFPROM=y
-# CONFIG_NVMEM_SPMI_SDAM is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-CONFIG_PCIE_QCOM=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCS_XPCS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_QCOM_APQ8064_SATA is not set
-# CONFIG_PHY_QCOM_IPQ4019_USB is not set
-CONFIG_PHY_QCOM_IPQ806X_SATA=y
-# CONFIG_PHY_QCOM_IPQ806X_USB is not set
-# CONFIG_PHY_QCOM_PCIE2 is not set
-# CONFIG_PHY_QCOM_QMP is not set
-# CONFIG_PHY_QCOM_QUSB2 is not set
-# CONFIG_PHY_QCOM_USB_HS_28NM is not set
-# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
-# CONFIG_PHY_QCOM_USB_SS is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_APQ8064 is not set
-# CONFIG_PINCTRL_APQ8084 is not set
-# CONFIG_PINCTRL_IPQ4019 is not set
-# CONFIG_PINCTRL_IPQ6018 is not set
-CONFIG_PINCTRL_IPQ8064=y
-# CONFIG_PINCTRL_IPQ8074 is not set
-# CONFIG_PINCTRL_MDM9615 is not set
-CONFIG_PINCTRL_MSM=y
-# CONFIG_PINCTRL_MSM8226 is not set
-# CONFIG_PINCTRL_MSM8660 is not set
-# CONFIG_PINCTRL_MSM8916 is not set
-# CONFIG_PINCTRL_MSM8960 is not set
-# CONFIG_PINCTRL_MSM8976 is not set
-# CONFIG_PINCTRL_MSM8994 is not set
-# CONFIG_PINCTRL_MSM8996 is not set
-# CONFIG_PINCTRL_MSM8998 is not set
-# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
-# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
-# CONFIG_PINCTRL_QCS404 is not set
-# CONFIG_PINCTRL_SC7180 is not set
-# CONFIG_PINCTRL_SDM660 is not set
-# CONFIG_PINCTRL_SDM845 is not set
-# CONFIG_PINCTRL_SM8150 is not set
-# CONFIG_PINCTRL_SM8250 is not set
-CONFIG_PM_DEVFREQ=y
-# CONFIG_PM_DEVFREQ_EVENT is not set
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_MSM=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PTP_1588_CLOCK=y
-# CONFIG_QCOM_A53PLL is not set
-CONFIG_QCOM_ADM=y
-CONFIG_QCOM_BAM_DMA=y
-CONFIG_QCOM_CLK_RPM=y
-# CONFIG_QCOM_COMMAND_DB is not set
-# CONFIG_QCOM_CPR is not set
-# CONFIG_QCOM_EBI2 is not set
-# CONFIG_QCOM_GENI_SE is not set
-CONFIG_QCOM_GSBI=y
-CONFIG_QCOM_HFPLL=y
-# CONFIG_QCOM_IOMMU is not set
-# CONFIG_QCOM_LLCC is not set
-# CONFIG_QCOM_OCMEM is not set
-# CONFIG_QCOM_PDC is not set
-# CONFIG_QCOM_RMTFS_MEM is not set
-CONFIG_QCOM_RPMCC=y
-# CONFIG_QCOM_RPMH is not set
-CONFIG_QCOM_SCM=y
-# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
-CONFIG_QCOM_SMEM=y
-# CONFIG_QCOM_SMSM is not set
-# CONFIG_QCOM_SOCINFO is not set
-CONFIG_QCOM_TCSR=y
-CONFIG_QCOM_TSENS=y
-CONFIG_QCOM_WDT=y
-# CONFIG_QCS_GCC_404 is not set
-# CONFIG_QCS_Q6SSTOP_404 is not set
-# CONFIG_QCS_TURING_404 is not set
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_QCOM_LABIBB is not set
-CONFIG_REGULATOR_QCOM_RPM=y
-# CONFIG_REGULATOR_QCOM_SPMI is not set
-# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
-# CONFIG_REGULATOR_VQMMC_IPQ4019 is not set
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_RESET_QCOM_AOSS is not set
-# CONFIG_RESET_QCOM_PDC is not set
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-# CONFIG_SC_DISPCC_7180 is not set
-# CONFIG_SC_GCC_7180 is not set
-# CONFIG_SC_GPUCC_7180 is not set
-# CONFIG_SC_LPASS_CORECC_7180 is not set
-# CONFIG_SC_MSS_7180 is not set
-# CONFIG_SC_VIDEOCC_7180 is not set
-# CONFIG_SDM_CAMCC_845 is not set
-# CONFIG_SDM_DISPCC_845 is not set
-# CONFIG_SDM_GCC_660 is not set
-# CONFIG_SDM_GCC_845 is not set
-# CONFIG_SDM_GPUCC_845 is not set
-# CONFIG_SDM_LPASSCC_845 is not set
-# CONFIG_SDM_VIDEOCC_845 is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-# CONFIG_SM_GCC_8150 is not set
-# CONFIG_SM_GCC_8250 is not set
-# CONFIG_SM_GPUCC_8150 is not set
-# CONFIG_SM_GPUCC_8250 is not set
-# CONFIG_SM_VIDEOCC_8150 is not set
-# CONFIG_SM_VIDEOCC_8250 is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_QUP=y
-CONFIG_SPMI=y
-# CONFIG_SPMI_HISI3670 is not set
-CONFIG_SPMI_MSM_PMIC_ARB=y
-# CONFIG_SPMI_PMIC_CLKDIV is not set
-CONFIG_SRCU=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STMMAC_SELFTESTS is not set
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-# CONFIG_UCLAMP_TASK is not set
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts
deleted file mode 100644
index c1c21856ca5f..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts
+++ /dev/null
@@ -1,479 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8062.dtsi"
-#include <dt-bindings/input/input.h>
-
-/delete-node/ &nand_pins;
-
-/ {
-	model = "NEC Platforms Aterm WG2600HP3";
-	compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064";
-
-	memory {
-		device_type = "memory";
-		reg =  <0x42000000 0x1e000000>;
-	};
-
-	aliases {
-		label-mac-device = &gmac2;
-
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_red;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&buttons_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		mode0 {
-			label = "mode0";
-			gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		mode1 {
-			label = "mode1";
-			gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_1>;
-			linux,input-type = <EV_SW>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led_power_green: power_green {
-			label = "green:power";
-			gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_power_red: power_red {
-			label = "red:power";
-			gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>;
-		};
-
-		active_green {
-			label = "green:active";
-			gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>;
-		};
-
-		active_red {
-			label = "red:active";
-			gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g_green {
-			label = "green:wlan2g";
-			gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-
-		wlan2g_red {
-			label = "red:wlan2g";
-			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g_green {
-			label = "green:wlan5g";
-			gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g_red {
-			label = "red:wlan5g";
-			gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
-		};
-
-		tv_green {
-			label = "green:tv";
-			gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>;
-		};
-
-		tv_red {
-			label = "red:tv";
-			gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>;
-		};
-
-		converter_green {
-			label = "green:converter";
-			gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>;
-		};
-
-		converter_red {
-			label = "red:converter";
-			gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&qcom_pinmux {
-	pinctrl-0 = <&akro_pins>;
-	pinctrl-names = "default";
-
-	spi_pins: spi_pins {
-		mux {
-			pins = "gpio18", "gpio19", "gpio21";
-			function = "gsbi5";
-			bias-pull-down;
-		};
-
-		data {
-			pins = "gpio18", "gpio19";
-			drive-strength = <10>;
-		};
-
-		cs {
-			pins = "gpio20";
-			drive-strength = <10>;
-		};
-
-		clk {
-			pins = "gpio21";
-			drive-strength = <12>;
-		};
-	};
-
-	buttons_pins: buttons_pins {
-		mux {
-			pins = "gpio22", "gpio24", "gpio40",
-				"gpio41";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		mux {
-			pins = "gpio14", "gpio15", "gpio35",
-				"gpio36", "gpio38", "gpio42",
-				"gpio43", "gpio46", "gpio55",
-				"gpio56", "gpio57", "gpio58";
-			function = "gpio";
-			bias-pull-down;
-		};
-
-		akro2 {
-			pins = "gpio15", "gpio35", "gpio38",
-				"gpio42", "gpio43", "gpio46",
-				"gpio55", "gpio56", "gpio57",
-				"gpio58";
-			drive-strength = <2>;
-		};
-
-		akro4 {
-			pins = "gpio14", "gpio36";
-			drive-strength = <4>;
-		};
-	};
-
-	/*
-	 * Stock firmware has the following settings, so let's do the same.
-	 * I don't sure why these are required.
-	 */
-	akro_pins: akro_pinmux {
-		akro {
-			pins = "gpio17", "gpio26", "gpio47";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		reset {
-			pins = "gpio45";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-			output-low;
-		};
-
-		gmac0_rgmii {
-			pins = "gpio25";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-};
-
-&gsbi5 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_SPI>;
-
-	spi@1a280000 {
-		status = "okay";
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-		flash@0 {
-			compatible = "jedec,spi-nor";
-			reg = <0>;
-			spi-max-frequency = <50000000>;
-			m25p,fast-read;
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "SBL1";
-					reg = <0x0000000 0x0020000>;
-					read-only;
-				};
-
-				partition@20000 {
-					label = "MIBIB";
-					reg = <0x0020000 0x0020000>;
-					read-only;
-				};
-
-				partition@40000 {
-					label = "SBL2";
-					reg = <0x0040000 0x0040000>;
-					read-only;
-				};
-
-				partition@80000 {
-					label = "SBL3";
-					reg = <0x0080000 0x0080000>;
-					read-only;
-				};
-
-				partition@100000 {
-					label = "DDRCONFIG";
-					reg = <0x0100000 0x0010000>;
-					read-only;
-				};
-
-				partition@110000 {
-					label = "SSD";
-					reg = <0x0110000 0x0010000>;
-					read-only;
-				};
-
-				partition@120000 {
-					label = "TZ";
-					reg = <0x0120000 0x0080000>;
-					read-only;
-				};
-
-				partition@1a0000 {
-					label = "RPM";
-					reg = <0x01a0000 0x0080000>;
-					read-only;
-				};
-
-				partition@220000 {
-					label = "APPSBL";
-					reg = <0x0220000 0x0080000>;
-					read-only;
-				};
-
-				partition@2a0000 {
-					label = "APPSBLENV";
-					reg = <0x02a0000 0x0010000>;
-					read-only;
-				};
-
-				factory: partition@2b0000 {
-					label = "PRODUCTDATA";
-					reg = <0x02b0000 0x0030000>;
-					read-only;
-				};
-
-				partition@2e0000 {
-					label = "ART";
-					reg = <0x02e0000 0x0040000>;
-					read-only;
-					compatible = "nvmem-cells";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					precal_ART_1000: precal@1000 {
-						reg = <0x1000 0x2f20>;
-					};
-
-					precal_ART_5000: precal@5000 {
-						reg = <0x5000 0x2f20>;
-					};
-				};
-
-				partition@320000 {
-					label = "TP";
-					reg = <0x0320000 0x0040000>;
-					read-only;
-				};
-
-				partition@360000 {
-					label = "TINY";
-					reg = <0x0360000 0x0500000>;
-					read-only;
-				};
-
-				partition@860000 {
-					compatible = "denx,uimage";
-					label = "firmware";
-					reg = <0x0860000 0x17a0000>;
-				};
-			};
-		};
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "qcom,ath10k";
-			reg = <0x00010000 0 0 0 0>;
-
-			qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
-
-			nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-	force_gen1 = <1>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "qcom,ath10k";
-			reg = <0x00010000 0 0 0 0>;
-
-			ieee80211-freq-limit = <2400000 2483000>;
-			qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
-
-			nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x04 0x80080080  /* PAD0_MODE */
-			0x0c 0x06000000  /* PAD6_MODE */
-			0x10 0x002613a0  /* PWS_REG */
-			0x50 0xcc36cc36  /* LED_CTRL0 */
-			0x54 0xca36ca36  /* LED_CTRL1 */
-			0x58 0xc936c936  /* LED_CTRL2 */
-			0x5c 0x03ffff00  /* LED_CTRL3 */
-			0x7c 0x0000004e  /* PORT0_STATUS */
-			0x94 0x0000004e  /* PORT6_STATUS */
-			0xe0 0xc74164de  /* SGMII_CTRL */
-			0xe4 0x0006a545  /* MAC_PWR_SEL */
-			>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-	mdiobus = <&mdio0>;
-	nvmem-cells = <&macaddr_factory_0>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-	mdiobus = <&mdio0>;
-	nvmem-cells = <&macaddr_factory_6>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&factory {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_factory_0: macaddr@0 {
-		reg = <0x0 0x6>;
-	};
-
-	macaddr_factory_6: macaddr@6 {
-		reg = <0x6 0x6>;
-	};
-
-	macaddr_PRODUCTDATA_c: macaddr@c {
-		reg = <0xc 0x6>;
-	};
-
-	macaddr_PRODUCTDATA_12: macaddr@12 {
-		reg = <0x12 0x6>;
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062.dtsi b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062.dtsi
deleted file mode 100644
index 29226ca27514..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062.dtsi
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include "qcom-ipq8064.dtsi"
-
-/ {
-	model = "Qualcomm IPQ8062";
-	compatible = "qcom,ipq8062", "qcom,ipq8064";
-
-	aliases {
-		serial0 = &gsbi4_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-};
-
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-
-	serial@16340000 {
-		status = "okay";
-	};
-	/*
-	* The i2c device on gsbi4 should not be enabled.
-	* On ipq806x designs gsbi4 i2c is meant for exclusive
-	* RPM usage. Turning this on in kernel manifests as
-	* i2c failure for the RPM.
-	*/
-};
-
-&opp_table0 {
-	/delete-node/opp-1200000000;
-	/delete-node/opp-1400000000;
-
-	/*
-	 * Voltage thresholds are <target min max>
-	 */
-	opp-384000000 {
-		opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
-		opp-microvolt-speed0-pvs1-v0 = < 925000 878750  971250>;
-		opp-microvolt-speed0-pvs2-v0 = < 875000 831250  918750>;
-		opp-microvolt-speed0-pvs3-v0 = < 800000 760000  840000>;
-	};
-
-	opp-600000000 {
-		opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
-		opp-microvolt-speed0-pvs1-v0 = < 975000 926250 1023750>;
-		opp-microvolt-speed0-pvs2-v0 = < 925000 878750  971250>;
-		opp-microvolt-speed0-pvs3-v0 = < 850000 807500  892500>;
-	};
-
-	opp-800000000 {
-		opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
-		opp-microvolt-speed0-pvs1-v0 = <1025000  973750 1076250>;
-		opp-microvolt-speed0-pvs2-v0 = < 995000  945250 1044750>;
-		opp-microvolt-speed0-pvs3-v0 = < 900000  855000  945000>;
-	};
-
-	opp-1000000000 {
-		opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
-		opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
-		opp-microvolt-speed0-pvs2-v0 = <1025000  973750 1076250>;
-		opp-microvolt-speed0-pvs3-v0 = < 950000  902500  997500>;
-	};
-};
-
-&pcie0 {
-	compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie1 {
-	compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie2 {
-	compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&smb208_s2a {
-	regulator-max-microvolt = <1150000>;
-};
-
-&smb208_s2b {
-	regulator-max-microvolt = <1150000>;
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi
deleted file mode 100644
index 115c6d43d243..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi
+++ /dev/null
@@ -1,375 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-		label-mac-device = &gmac2;
-	};
-};
-
-&qcom_pinmux {
-	spi_pins: spi_pins {
-		mux {
-			pins = "gpio18", "gpio19", "gpio21";
-			function = "gsbi5";
-			bias-pull-down;
-		};
-
-		data {
-			pins = "gpio18", "gpio19";
-			drive-strength = <10>;
-		};
-
-		cs {
-			pins = "gpio20";
-			function = "gpio";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-
-		clk {
-			pins = "gpio21";
-			drive-strength = <12>;
-		};
-	};
-
-	usb0_pwr_en_pin: usb0_pwr_en_pin {
-		mux {
-			pins = "gpio25";
-			function = "gpio";
-			drive-strength = <10>;
-			bias-pull-up;
-			output-high;
-		};
-	};
-
-	usb1_pwr_en_pin: usb1_pwr_en_pin {
-		mux {
-			pins = "gpio23";
-			function = "gpio";
-			drive-strength = <10>;
-			bias-pull-up;
-			output-high;
-		};
-	};
-};
-
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_SPI>;
-	status = "okay";
-
-	spi@1a280000 {
-		status = "okay";
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-		flash@0 {
-			compatible = "jedec,spi-nor";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "SBL1";
-					reg = <0x0 0x20000>;
-					read-only;
-				};
-
-				partition@20000 {
-					label = "MIBIB";
-					reg = <0x20000 0x20000>;
-					read-only;
-				};
-
-				partition@40000 {
-					label = "SBL2";
-					reg = <0x40000 0x20000>;
-					read-only;
-				};
-
-				partition@60000 {
-					label = "SBL3";
-					reg = <0x60000 0x30000>;
-					read-only;
-				};
-
-				partition@90000 {
-					label = "DDRCONFIG";
-					reg = <0x90000 0x10000>;
-					read-only;
-				};
-
-				partition@a0000 {
-					label = "SSD";
-					reg = <0xa0000 0x10000>;
-					read-only;
-				};
-
-				partition@b0000 {
-					label = "TZ";
-					reg = <0xb0000 0x30000>;
-					read-only;
-				};
-
-				partition@e0000 {
-					label = "RPM";
-					reg = <0xe0000 0x20000>;
-					read-only;
-				};
-
-				partition@100000 {
-					label = "fs-uboot";
-					reg = <0x100000 0x70000>;
-					read-only;
-				};
-
-				partition@170000 {
-					label = "uboot-env";
-					reg = <0x170000 0x40000>;
-					read-only;
-				};
-
-				partition@1b0000 {
-					label = "radio";
-					reg = <0x1b0000 0x40000>;
-					read-only;
-					compatible = "nvmem-cells";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					precal_radio_1000: precal@1000 {
-						reg = <0x1000 0x2f20>;
-					};
-
-					precal_radio_5000: precal@5000 {
-						reg = <0x5000 0x2f20>;
-					};
-				};
-
-				partition@1f0000 {
-					label = "os-image";
-					reg = <0x1f0000 0x400000>;
-				};
-
-				partition@5f0000 {
-					label = "rootfs";
-					reg = <0x5f0000 0x1900000>;
-				};
-
-				defaultmac: partition@1ef0000 {
-					label = "default-mac";
-					reg = <0x1ef0000 0x00200>;
-					read-only;
-				};
-
-				partition@1ef0200 {
-					label = "pin";
-					reg = <0x1ef0200 0x00200>;
-					read-only;
-				};
-
-				partition@1ef0400 {
-					label = "product-info";
-					reg = <0x1ef0400 0x0fc00>;
-					read-only;
-				};
-
-				partition@1f00000 {
-					label = "partition-table";
-					reg = <0x1f00000 0x10000>;
-					read-only;
-				};
-
-				partition@1f10000 {
-					label = "soft-version";
-					reg = <0x1f10000 0x10000>;
-					read-only;
-				};
-
-				partition@1f20000 {
-					label = "support-list";
-					reg = <0x1f20000 0x10000>;
-					read-only;
-				};
-
-				partition@1f30000 {
-					label = "profile";
-					reg = <0x1f30000 0x10000>;
-					read-only;
-				};
-
-				partition@1f40000 {
-					label = "default-config";
-					reg = <0x1f40000 0x10000>;
-					read-only;
-				};
-
-				partition@1f50000 {
-					label = "user-config";
-					reg = <0x1f50000 0x40000>;
-					read-only;
-				};
-
-				partition@1f90000 {
-					label = "qos-db";
-					reg = <0x1f90000 0x40000>;
-					read-only;
-				};
-
-				partition@1fd0000 {
-					label = "usb-config";
-					reg = <0x1fd0000 0x10000>;
-					read-only;
-				};
-
-				partition@1fe0000 {
-					label = "log";
-					reg = <0x1fe0000 0x20000>;
-					read-only;
-				};
-			};
-		};
-	};
-};
-
-&usb3_0 {
-	status = "okay";
-
-	pinctrl-0 = <&usb0_pwr_en_pin>;
-	pinctrl-names = "default";
-};
-
-&usb3_1 {
-	status = "okay";
-
-	pinctrl-0 = <&usb1_pwr_en_pin>;
-	pinctrl-names = "default";
-};
-
-&pcie0 {
-	status = "okay";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&macaddr_defaultmac_8>, <&precal_radio_1000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-			mac-address-increment = <(-1)>;
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-	max-link-speed = <1>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&macaddr_defaultmac_8>, <&precal_radio_5000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	nvmem-cells = <&macaddr_defaultmac_8>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <1>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	nvmem-cells = <&macaddr_defaultmac_8>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&defaultmac {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_defaultmac_8: macaddr@8 {
-		reg = <0x8 0x6>;
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts
deleted file mode 100644
index 6cb21fc4f3f0..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts
+++ /dev/null
@@ -1,135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8064-ad7200-c2600.dtsi"
-
-/ {
-	model = "TP-Link Talon AD7200";
-	compatible = "tplink,ad7200", "qcom,ipq8064";
-
-	aliases {
-		led-boot = &led_status;
-		led-failsafe = &led_status;
-		led-running = &led_status;
-		led-upgrade = &led_status;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		led_enable {
-			label = "led-enable";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_LIGHTS_TOGGLE>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		lan {
-			label = "blue:lan";
-			gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb1 {
-			label = "blue:usb1";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g {
-			label = "blue:wlan5g";
-			gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb3 {
-			label = "blue:usb3";
-			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "blue:wlan2g";
-			gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_orange {
-			label = "orange:wan";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
-		};
-
-		wan_blue {
-			label = "blue:wan";
-			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "blue:wps";
-			gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan60g {
-			label = "blue:wlan60g";
-			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_status: status {
-			label = "blue:status";
-			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio53", "gpio54", "gpio67";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26",
-					"gpio33", "gpio55", "gpio56", "gpio66";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&pcie2 {
-	status = "okay";
-	max-link-speed = <1>;
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
deleted file mode 100644
index 70034a50e3f3..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
-	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&flash {
-	partitions {
-		compatible = "qcom,smem-part";
-	};
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-	max-link-speed = <1>;
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "qcom,smem-part";
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
deleted file mode 100644
index c771a627ca1b..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
-	model = "Qualcomm IPQ8064/AP161";
-	compatible = "qcom,ipq8064-ap161", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-	};
-};
-
-&qcom_pinmux {
-	rgmii2_pins: rgmii2_pins {
-		mux {
-			pins = "gpio27", "gpio28", "gpio29",
-			       "gpio30", "gpio31", "gpio32",
-			       "gpio51", "gpio52", "gpio59",
-			       "gpio60", "gpio61", "gpio62",
-			       "gpio2", "gpio66";
-		};
-	};
-};
-
-&flash {
-	partitions {
-		compatible = "qcom,smem-part";
-	};
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-	max-link-speed = <1>;
-};
-
-&pcie2 {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "qcom,smem-part";
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x20080     /* PAD6_MODE */
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-		qca,phy-rgmii-en;
-		qca,txclk-delay-en;
-		qca,rxclk-delay-en;
-	};
-
-	phy3: ethernet-phy@3 {
-		device_type = "ethernet-phy";
-		reg = <3>;
-	};
-};
-
-&gmac0 {
-	status = "okay";
-	phy-mode = "rgmii";
-	qcom,id = <0>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-	mdiobus = <&mdio0>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-	mdiobus = <&mdio0>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-	mdiobus = <&mdio0>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
deleted file mode 100644
index cef1aba34445..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-#include "qcom-ipq8064-ad7200-c2600.dtsi"
-
-/ {
-	model = "TP-Link Archer C2600";
-	compatible = "tplink,c2600", "qcom,ipq8064";
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &general;
-		led-running = &power;
-		led-upgrade = &general;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		ledswitch {
-			label = "ledswitch";
-			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_LIGHTS_TOGGLE>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		lan {
-			label = "white:lan";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb4 {
-			label = "white:usb_4";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb2 {
-			label = "white:usb_2";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "white:wps";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_amber {
-			label = "amber:wan";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
-		};
-
-		wan_white {
-			label = "white:wan";
-			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
-		};
-
-		power: power {
-			label = "white:power";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		general: general {
-			label = "white:general";
-			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio16", "gpio54", "gpio65";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
-					"gpio53", "gpio66";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
deleted file mode 100644
index 23487c9ca064..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
+++ /dev/null
@@ -1,384 +0,0 @@
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear Nighthawk X4 D7800";
-	compatible = "netgear,d7800", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		rsvd@5fe00000 {
-			reg = <0x5fe00000 0x200000>;
-			reusable;
-		};
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &power_white;
-		led-failsafe = &power_amber;
-		led-running = &power_white;
-		led-upgrade = &power_amber;
-	};
-
-	chosen {
-		bootargs = "rootfstype=squashfs noinitrd";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		usb1 {
-			label = "white:usb1";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb2 {
-			label = "white:usb2";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_amber: power_amber {
-			label = "amber:power";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_white {
-			label = "white:wan";
-			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_amber {
-			label = "amber:wan";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "white:wps";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-		};
-
-		esata {
-			label = "white:esata";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_white: power_white {
-			label = "white:power";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		wifi {
-			label = "white:wifi";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio6", "gpio54", "gpio65";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-				"gpio24","gpio26", "gpio53", "gpio64";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	usb0_pwr_en_pins: usb0_pwr_en_pins {
-		mux {
-			pins = "gpio15";
-			function = "gpio";
-			drive-strength = <12>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-
-	usb1_pwr_en_pins: usb1_pwr_en_pins {
-		mux {
-			pins = "gpio16", "gpio68";
-			function = "gpio";
-			drive-strength = <12>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-};
-
-&sata_phy {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&usb3_0 {
-	status = "okay";
-
-	pinctrl-0 = <&usb0_pwr_en_pins>;
-	pinctrl-names = "default";
-};
-
-&usb3_1 {
-	status = "okay";
-
-	pinctrl-0 = <&usb1_pwr_en_pins>;
-	pinctrl-names = "default";
-};
-
-&pcie0 {
-	status = "okay";
-	reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
-	pinctrl-0 = <&pcie0_pins>;
-	pinctrl-names = "default";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-			mac-address-increment = <(1)>;
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-	reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
-	pinctrl-0 = <&pcie1_pins>;
-	pinctrl-names = "default";
-	max-link-speed = <1>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-			mac-address-increment = <(2)>;
-		};
-	};
-};
-
-&pcie2 {
-	status = "okay";
-	reset-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>;
-	pinctrl-0 = <&pcie2_pins>;
-	pinctrl-names = "default";
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		nand-is-boot-medium;
-		qcom,boot_pages_size = <0x1180000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qcadata@0 {
-				label = "qcadata";
-				reg = <0x0000000 0x0c80000>;
-				read-only;
-			};
-
-			APPSBL@c80000 {
-				label = "APPSBL";
-				reg = <0x0c80000 0x0500000>;
-				read-only;
-			};
-
-			APPSBLENV@1180000 {
-				label = "APPSBLENV";
-				reg = <0x1180000 0x0080000>;
-				read-only;
-			};
-
-			art@1200000 {
-				label = "art";
-				reg = <0x1200000 0x0140000>;
-				read-only;
-				compatible = "nvmem-cells";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				macaddr_art_0: macaddr@0 {
-					reg = <0x0 0x6>;
-				};
-
-				macaddr_art_6: macaddr@6 {
-					reg = <0x6 0x6>;
-				};
-
-				precal_art_1000: precal@1000 {
-					reg = <0x1000 0x2f20>;
-				};
-
-				precal_art_5000: precal@5000 {
-					reg = <0x5000 0x2f20>;
-				};
-			};
-
-			artbak: art@1340000 {
-				label = "artbak";
-				reg = <0x1340000 0x0140000>;
-				read-only;
-			};
-
-			kernel@1480000 {
-				label = "kernel";
-				reg = <0x1480000 0x0400000>;
-			};
-
-			ubi@1880000 {
-				label = "ubi";
-				reg = <0x1880000 0x6080000>;
-			};
-
-			reserve@7900000 {
-				label = "reserve";
-				reg = <0x7900000 0x0700000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	nvmem-cells = <&macaddr_art_6>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	nvmem-cells = <&macaddr_art_0>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-db149.dts
deleted file mode 100644
index 8e8d942fbd71..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
-	model = "Qualcomm IPQ8064/DB149";
-	compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
-
-	aliases {
-		serial0 = &gsbi2_serial;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-};
-
-&qcom_pinmux {
-	rgmii0_pins: rgmii0_pins {
-		mux {
-			pins = "gpio2", "gpio66";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-};
-
-&gsbi2 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-
-	gsbi2_serial: serial@12490000 {
-		status = "okay";
-	};
-};
-
-&gsbi4 {
-	status = "disabled";
-};
-
-&gsbi4_serial {
-	status = "disabled";
-};
-
-&flash {
-	m25p,fast-read;
-
-	partition@0 {
-		label = "lowlevel_init";
-		reg = <0x0 0x1b0000>;
-	};
-
-	partition@1 {
-		label = "u-boot";
-		reg = <0x1b0000 0x80000>;
-	};
-
-	partition@2 {
-		label = "u-boot-env";
-		reg = <0x230000 0x40000>;
-	};
-
-	partition@3 {
-		label = "caldata";
-		reg = <0x270000 0x40000>;
-	};
-
-	partition@4 {
-		label = "firmware";
-		reg = <0x2b0000 0x1d50000>;
-	};
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-		>;
-	};
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-
-	phy6: ethernet-phy@6 {
-		reg = <6>;
-	};
-
-	phy7: ethernet-phy@7 {
-		reg = <7>;
-	};
-};
-
-&gmac0 {
-	status = "okay";
-	phy-mode = "rgmii";
-	qcom,id = <0>;
-	phy-handle = <&phy4>;
-
-	pinctrl-0 = <&rgmii0_pins>;
-	pinctrl-names = "default";
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <1>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-	phy-handle = <&phy6>;
-};
-
-&gmac3 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <3>;
-	phy-handle = <&phy7>;
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
deleted file mode 100644
index 9d82d52d273f..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8064-eax500.dtsi"
-
-/ {
-	model = "Linksys EA7500 V1 WiFi Router";
-	compatible = "linksys,ea7500-v1", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0xe000000>;
-		device_type = "memory";
-	};
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		/* look for root deviceblock nbr in this bootarg */
-		find-rootblock = "ubi.mtd=";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		led_power: power {
-			label = "white:power";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio65", "gpio68";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio6";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&partitions {
-	partition@5f80000 {
-		label = "sysdiag";
-		reg = <0x5f80000 0x100000>;
-	};
-
-	partition@6080000 {
-		label = "syscfg";
-		reg = <0x6080000 0x1f80000>;
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
deleted file mode 100644
index 1c6a4bdacd02..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ /dev/null
@@ -1,128 +0,0 @@
-#include "qcom-ipq8064-eax500.dtsi"
-
-/ {
-	model = "Linksys EA8500 WiFi Router";
-	compatible = "linksys,ea8500", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		wps {
-			label = "green:wps";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_power: power {
-			label = "white:power";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		wifi {
-			label = "green:wifi";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio65", "gpio67", "gpio68";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio6", "gpio53", "gpio54";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&sata_phy {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&partitions {
-	partition@5f80000 {
-		label = "syscfg";
-		reg = <0x5f80000 0x2080000>;
-	};
-};
-
-&mdio0 {
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&gmac1 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,rgmii_delay = <0>;
-	qcom,emulation = <0>;
-};
-
-/* LAN */
-&gmac2 {
-	qcom,phy_mdio_addr = <0>;	/* none */
-	qcom,poll_required = <0>;	/* no polling */
-	qcom,rgmii_delay = <0>;
-	qcom,emulation = <0>;
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
deleted file mode 100644
index e5282efaab0a..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
+++ /dev/null
@@ -1,219 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		bootargs = "console=ttyMSM0,115200n8";
-		/* append to bootargs adding the root deviceblock nbr from bootloader */
-		append-rootblock = "ubi.mtd=";
-	};
-};
-
-&qcom_pinmux {
-	/* eax500 routers reuse the pcie2 reset pin for switch reset pin */
-	switch_reset: switch_reset_pins {
-		mux {
-			pins = "gpio63";
-			function = "gpio";
-			drive-strength = <12>;
-			bias-pull-up;
-		};
-	};
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-
-	max-link-speed = <1>;
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		nand-is-boot-medium;
-		qcom,boot_pages_size = <0x0c80000>;
-
-		partitions: partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x0000000 0x0040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x0040000 0x0140000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "SBL2";
-				reg = <0x0180000 0x0140000>;
-				read-only;
-			};
-
-			partition@2c0000 {
-				label = "SBL3";
-				reg = <0x02c0000 0x0280000>;
-				read-only;
-			};
-
-			partition@540000 {
-				label = "DDRCONFIG";
-				reg = <0x0540000 0x0120000>;
-				read-only;
-			};
-
-			partition@660000 {
-				label = "SSD";
-				reg = <0x0660000 0x0120000>;
-				read-only;
-			};
-
-			partition@780000 {
-				label = "TZ";
-				reg = <0x0780000 0x0280000>;
-				read-only;
-			};
-
-			partition@a00000 {
-				label = "RPM";
-				reg = <0x0a00000 0x0280000>;
-				read-only;
-			};
-
-			art: partition@c80000 {
-				label = "art";
-				reg = <0x0c80000 0x0140000>;
-				read-only;
-			};
-
-			partition@dc0000 {
-				label = "APPSBL";
-				reg = <0x0dc0000 0x0100000>;
-				read-only;
-			};
-
-			partition@ec0000 {
-				label = "u_env";
-				reg = <0x0ec0000 0x0040000>;
-			};
-
-			partition@f00000 {
-				label = "s_env";
-				reg = <0x0f00000 0x0040000>;
-			};
-
-			partition@f40000 {
-				label = "devinfo";
-				reg = <0x0f40000 0x0040000>;
-			};
-
-			partition@f80000 {
-				label = "kernel1";
-				reg = <0x0f80000 0x2800000>;  /* 4 MB, spill to rootfs */
-			};
-
-			partition@1380000 {
-				label = "rootfs1";
-				reg = <0x1380000 0x2400000>;
-			};
-
-			partition@3780000 {
-				label = "kernel2";
-				reg = <0x3780000 0x2800000>;
-			};
-
-			partition@3b80000 {
-				label = "rootfs2";
-				reg = <0x3b80000 0x2400000>;
-			};
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	/* Switch from documentation require at least 10ms for reset */
-	reset-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>;
-	reset-post-delay-us = <12000>;
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x00010 0x2613a0    /* PWS_REG */
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-g10.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-g10.dts
deleted file mode 100644
index 735ccb2d53d6..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-g10.dts
+++ /dev/null
@@ -1,279 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	compatible = "asrock,g10", "qcom,ipq8064";
-	model = "ASRock G10";
-
-	aliases {
-		ethernet0 = &gmac1;
-		ethernet1 = &gmac0;
-
-		led-boot = &led_status_blue;
-		led-failsafe = &led_status_amber;
-		led-running = &led_status_blue;
-		led-upgrade = &led_status_amber;
-	};
-
-	chosen {
-		bootargs-override = "console=ttyMSM0,115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		/*
-		 * this is a bit misleading. Because there are about seven
-		 * multicolor LEDs connected all wired together in parallel.
-		 */
-
-		status_yellow {
-			label = "yellow:status";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_status_amber: status_amber {
-			label = "amber:status";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_status_blue: status_blue {
-			label = "blue:status";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		/*
-		 * LED is declared in vendors boardfile but it's not
-		 * working and the manual doesn't mention anything
-		 * about the LED being white.
-
-		status_white {
-			label = "white:status";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-		};
-		*/
-	};
-
-	i2c-gpio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		compatible = "i2c-gpio";
-		gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */
-			<&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */
-		i2c-gpio,delay-us = <5>;
-		i2c-gpio,scl-output-only;
-
-		mcu@50 {
-			reg = <0x50>;
-			compatible = "sonix,sn8f25e21";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		ir-remote {
-			label = "ir-remote";
-			gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps5g {
-			label = "wps5g";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps2g {
-			label = "wps2g";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&gmac1 {
-	status = "okay";
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gsbi4_serial {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		nand-is-boot-medium;
-		qcom,boot_pages_size = <0x1200000>;
-
-		partitions {
-			compatible = "qcom,smem-part";
-		};
-	};
-};
-
-&pcie0 {
-	status = "okay";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi5g: wifi@1,0 {
-			reg = <0x00010000 0 0 0 0>;
-			compatible = "qcom,ath10k";
-			qcom,ath10k-calibration-variant = "ASRock-G10";
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi2g: wifi@1,0 {
-			reg = <0x00010000 0 0 0 0>;
-			compatible = "qcom,ath10k";
-			qcom,ath10k-calibration-variant = "ASRock-G10";
-		};
-	};
-};
-
-&qcom_pinmux {
-	led_pins: led_pins {
-		mux {
-			pins = "gpio7", "gpio8", "gpio9", "gpio26";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	button_pins: button_pins {
-		mux {
-			pins = "gpio15", "gpio16", "gpio64", "gpio65";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	uart0_pins: uart0_pins {
-		mux {
-			pins = "gpio10", "gpio11";
-			function = "gsbi4";
-			drive-strength = <10>;
-			bias-disable;
-		};
-	};
-};
-
-&rpm {
-	pinctrl-0 = <&i2c4_pins>;
-	pinctrl-names = "default";
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&tcsr {
-	qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
-};
-
-/delete-node/ &pcie2_pins;
-/delete-node/ &pcie2;
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
deleted file mode 100644
index 0970eaf0ecc0..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
+++ /dev/null
@@ -1,314 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Netgear Nighthawk X4 R7500";
-	compatible = "netgear,r7500", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0xe000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &power_white;
-		led-failsafe = &power_amber;
-		led-running = &power_white;
-		led-upgrade = &power_amber;
-	};
-
-	chosen {
-		bootargs = "rootfstype=squashfs noinitrd";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		usb1 {
-			label = "white:usb1";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb2 {
-			label = "white:usb2";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_amber: power_amber {
-			label = "amber:power";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_white {
-			label = "white:wan";
-			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_amber {
-			label = "amber:wan";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "white:wps";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-		};
-
-		esata {
-			label = "white:esata";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_white: power_white {
-			label = "white:power";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		wifi {
-			label = "white:wifi";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio6", "gpio54", "gpio65";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-				"gpio24","gpio26", "gpio53", "gpio64";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&gsbi5 {
-	status = "disabled";
-
-	spi@1a280000 {
-		status = "disabled";
-	};
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-	max-link-speed = <1>;
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		nand-is-boot-medium;
-		qcom,boot_pages_size = <0x1180000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qcadata@0 {
-				label = "qcadata";
-				reg = <0x0000000 0x0c80000>;
-				read-only;
-			};
-
-			APPSBL@c80000 {
-				label = "APPSBL";
-				reg = <0x0c80000 0x0500000>;
-				read-only;
-			};
-
-			APPSBLENV@1180000 {
-				label = "APPSBLENV";
-				reg = <0x1180000 0x0080000>;
-				read-only;
-			};
-
-			art: art@1200000 {
-				label = "art";
-				reg = <0x1200000 0x0140000>;
-				read-only;
-			};
-
-			kernel@1340000 {
-				label = "kernel";
-				reg = <0x1340000 0x0400000>;
-			};
-
-			ubi@1740000 {
-				label = "ubi";
-				reg = <0x1740000 0x1600000>;
-			};
-
-			netgear@2d40000 {
-				label = "netgear";
-				reg = <0x2d40000 0x0c00000>;
-				read-only;
-			};
-
-			reserve@3940000 {
-				label = "reserve";
-				reg = <0x3940000 0x46c0000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	nvmem-cells = <&macaddr_art_6>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	nvmem-cells = <&macaddr_art_0>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&tcsr {
-	qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
-	compatible = "qcom,tcsr";
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&art {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_art_0: macaddr@0 {
-		reg = <0x0 0x6>;
-	};
-
-	macaddr_art_6: macaddr@6 {
-		reg = <0x6 0x6>;
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
deleted file mode 100644
index 30b56bb9d64f..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
+++ /dev/null
@@ -1,374 +0,0 @@
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear Nighthawk X4 R7500v2";
-	compatible = "netgear,r7500v2", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		rsvd@5fe00000 {
-			reg = <0x5fe00000 0x200000>;
-			reusable;
-		};
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	chosen {
-		bootargs = "rootfstype=squashfs noinitrd";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		usb1 {
-			label = "amber:usb1";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb3 {
-			label = "amber:usb3";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		status {
-			label = "amber:status";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		internet {
-			label = "white:internet";
-			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan {
-			label = "white:wan";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "white:wps";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-		};
-
-		esata {
-			label = "white:esata";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		power: power {
-			label = "white:power";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		wifi {
-			label = "white:wifi";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio6", "gpio54", "gpio65";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-				"gpio24","gpio26", "gpio53", "gpio64";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	usb0_pwr_en_pins: usb0_pwr_en_pins {
-		mux {
-			pins = "gpio15";
-			function = "gpio";
-			drive-strength = <12>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-
-	usb1_pwr_en_pins: usb1_pwr_en_pins {
-		mux {
-			pins = "gpio16", "gpio68";
-			function = "gpio";
-			drive-strength = <12>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-};
-
-&sata_phy {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&usb3_0 {
-	status = "okay";
-
-	pinctrl-0 = <&usb0_pwr_en_pins>;
-	pinctrl-names = "default";
-};
-
-&usb3_1 {
-	status = "okay";
-
-	pinctrl-0 = <&usb1_pwr_en_pins>;
-	pinctrl-names = "default";
-};
-
-&pcie0 {
-	status = "okay";
-	reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&pcie0_pins>;
-	pinctrl-names = "default";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-			mac-address-increment = <(1)>;
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-	reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&pcie1_pins>;
-	pinctrl-names = "default";
-	max-link-speed = <1>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-			mac-address-increment = <(2)>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		nand-is-boot-medium;
-		qcom,boot_pages_size = <0x1180000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qcadata@0 {
-				label = "qcadata";
-				reg = <0x0000000 0x0c80000>;
-				read-only;
-			};
-
-			APPSBL@c80000 {
-				label = "APPSBL";
-				reg = <0x0c80000 0x0500000>;
-				read-only;
-			};
-
-			APPSBLENV@1180000 {
-				label = "APPSBLENV";
-				reg = <0x1180000 0x0080000>;
-				read-only;
-			};
-
-			art@1200000 {
-				label = "art";
-				reg = <0x1200000 0x0140000>;
-				read-only;
-				compatible = "nvmem-cells";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				macaddr_art_0: macaddr@0 {
-					reg = <0x0 0x6>;
-				};
-
-				macaddr_art_6: macaddr@6 {
-					reg = <0x6 0x6>;
-				};
-
-				precal_art_1000: precal@1000 {
-					reg = <0x1000 0x2f20>;
-				};
-
-				precal_art_5000: precal@5000 {
-					reg = <0x5000 0x2f20>;
-				};
-			};
-
-			artbak: art@1340000 {
-				label = "artbak";
-				reg = <0x1340000 0x0140000>;
-				read-only;
-			};
-
-			kernel@1480000 {
-				label = "kernel";
-				reg = <0x1480000 0x0400000>;
-			};
-
-			ubi@1880000 {
-				label = "ubi";
-				reg = <0x1880000 0x6080000>;
-			};
-
-			reserve@7900000 {
-				label = "reserve";
-				reg = <0x7900000 0x0700000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0xaa545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	nvmem-cells = <&macaddr_art_6>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	nvmem-cells = <&macaddr_art_0>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts
deleted file mode 100644
index b3e06db86d1a..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts
+++ /dev/null
@@ -1,317 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Ubiquiti UniFi AC HD";
-	compatible = "ubnt,unifi-ac-hd", "qcom,ipq8064";
-
-	aliases {
-		label-mac-device = &gmac2;
-		led-boot = &led_dome_white;
-		led-failsafe = &led_dome_white;
-		led-running = &led_dome_blue;
-		led-upgrade = &led_dome_blue;
-		mdio-gpio0 = &mdio0;
-		ethernet0 = &gmac2;
-		ethernet1 = &gmac1;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		led_dome_blue: dome_blue {
-			label = "blue:dome";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_dome_white: dome_white {
-			label = "white:dome";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio68";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio9", "gpio53";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-			output-low;
-		};
-	};
-
-	spi_pins: spi_pins {
-		mux {
-			pins = "gpio18", "gpio19", "gpio21";
-			function = "gsbi5";
-			drive-strength = <10>;
-			bias-none;
-		};
-
-		cs {
-			pins = "gpio20";
-			drive-strength = <12>;
-		};
-	};
-};
-
-&CPU_SPC {
-	status = "disabled";
-};
-
-&gsbi5 {
-	status = "okay";
-
-	qcom,mode = <GSBI_PROT_SPI>;
-
-	spi@1a280000 {
-		status = "okay";
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-		cs-gpios = <&qcom_pinmux 20 0>;
-
-		flash@0 {
-			compatible = "mx25u25635f", "jedec,spi-nor";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-			m25p,fast-read;
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "SBL1";
-					reg = <0x0 0x20000>;
-					read-only;
-				};
-
-				partition@20000 {
-					label = "MIBIB";
-					reg = <0x20000 0x10000>;
-					read-only;
-				};
-
-				partition@30000 {
-					label = "SBL2";
-					reg = <0x30000 0x20000>;
-					read-only;
-				};
-
-				partition@50000 {
-					label = "SBL3";
-					reg = <0x50000 0x30000>;
-					read-only;
-				};
-
-				partition@80000 {
-					label = "DDRCONFIG";
-					reg = <0x80000 0x10000>;
-					read-only;
-				};
-
-				partition@90000 {
-					label = "SSD";
-					reg = <0x90000 0x10000>;
-					read-only;
-				};
-
-				partition@a0000 {
-					label = "TZ";
-					reg = <0xa0000 0x30000>;
-					read-only;
-				};
-
-				partition@d0000 {
-					label = "RPM";
-					reg = <0xd0000 0x20000>;
-					read-only;
-				};
-
-				partition@f0000 {
-					label = "APPSBL";
-					reg = <0xf0000 0xc0000>;
-					read-only;
-				};
-
-				partition@1b0000 {
-					label = "APPSBLENV";
-					reg = <0x1b0000 0x10000>;
-					read-only;
-				};
-
-				eeprom: partition@1c0000 {
-					label = "EEPROM";
-					reg = <0x1c0000 0x10000>;
-					read-only;
-				};
-
-				partition@1d0000 {
-					label = "bootselect";
-					reg = <0x1d0000 0x10000>;
-				};
-
-				partition@1e0000 {
-					compatible = "denx,fit";
-					label = "firmware";
-					reg = <0x1e0000 0xe70000>;
-				};
-
-				partition@1050000 {
-					label = "kernel1";
-					reg = <0x1050000 0xe70000>;
-					read-only;
-				};
-
-				partition@1ec0000 {
-					label = "debug";
-					reg = <0x1ec0000 0x100000>;
-					read-only;
-				};
-
-				partition@1fc0000 {
-					label = "cfg";
-					reg = <0x1fc0000 0x40000>;
-					read-only;
-				};
-			};
-		};
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	nand-ecc-strength = <4>;
-	nand-bus-width = <8>;
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-
-	phy5: ethernet-phy@5 {
-		reg = <5>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-
-	mdiobus = <&mdio0>;
-	phy-handle = <&phy5>;
-	phy-mode = "sgmii";
-	qcom,id = <1>;
-
-	nvmem-cells = <&macaddr_eeprom_6>;
-	nvmem-cell-names = "mac-address";
-};
-
-&gmac2 {
-	status = "okay";
-
-	mdiobus = <&mdio0>;
-	phy-handle = <&phy4>;
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	nvmem-cells = <&macaddr_eeprom_0>;
-	nvmem-cell-names = "mac-address";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&tcsr {
-	status = "okay";
-};
-
-&hs_phy_0 {
-	status = "okay";
-};
-
-&ss_phy_0 {
-	status = "okay";
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&hs_phy_1 {
-	status = "okay";
-};
-
-&ss_phy_1 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&eeprom {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_eeprom_0: macaddr@0 {
-		reg = <0x0 0x6>;
-	};
-
-	macaddr_eeprom_6: macaddr@6 {
-		reg = <0x6 0x6>;
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
deleted file mode 100644
index b9ee86a89166..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
+++ /dev/null
@@ -1,69 +0,0 @@
-#include "qcom-ipq8064.dtsi"
-
-/ {
-	aliases {
-		serial0 = &gsbi4_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-};
-
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-
-	serial@16340000 {
-		status = "okay";
-	};
-	/*
-	* The i2c device on gsbi4 should not be enabled.
-	* On ipq806x designs gsbi4 i2c is meant for exclusive
-	* RPM usage. Turning this on in kernel manifests as
-	* i2c failure for the RPM.
-	*/
-};
-
-&CPU_SPC {
-	status = "okay";
-};
-
-&pcie0 {
-	compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie1 {
-	compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie2 {
-	compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&sata {
-	ports-implemented = <0x1>;
-};
-
-&ss_phy_0 {
-	qcom,rx-eq = <2>;
-	qcom,tx-deamp_3_5db = <32>;
-	qcom,mpll = <5>;
-};
-
-&ss_phy_1 {
-	qcom,rx-eq = <2>;
-	qcom,tx-deamp_3_5db = <32>;
-	qcom,mpll = <5>;
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
deleted file mode 100644
index 27d9fc84b35f..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
+++ /dev/null
@@ -1,408 +0,0 @@
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "TP-Link Archer VR2600v";
-	compatible = "tplink,vr2600v", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &power;
-		led-failsafe = &general;
-		led-running = &power;
-		led-upgrade = &general;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		dect {
-			label = "dect";
-			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PHONE>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		ledswitch {
-			label = "ledswitch";
-			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_LIGHTS_TOGGLE>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		dsl {
-			label = "white:dsl";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb {
-			label = "white:usb";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan {
-			label = "white:lan";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "white:wlan2g";
-			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g {
-			label = "white:wlan5g";
-			gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
-		};
-
-		power: power {
-			label = "white:power";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		phone {
-			label = "white:phone";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan {
-			label = "white:wan";
-			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
-		};
-
-		general: general {
-			label = "white:general";
-			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&qcom_pinmux {
-	led_pins: led_pins {
-		mux {
-			pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
-				"gpio26", "gpio53", "gpio56", "gpio66";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	button_pins: button_pins {
-		mux {
-			pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	spi_pins: spi_pins {
-		mux {
-			pins = "gpio18", "gpio19", "gpio21";
-			function = "gsbi5";
-			bias-pull-down;
-		};
-
-		data {
-			pins = "gpio18", "gpio19";
-			drive-strength = <10>;
-		};
-
-		cs {
-			pins = "gpio20";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-
-		clk {
-			pins = "gpio21";
-			drive-strength = <12>;
-		};
-	};
-};
-
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_SPI>;
-	status = "okay";
-
-	spi4: spi@1a280000 {
-		status = "okay";
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-		flash@0 {
-			compatible = "jedec,spi-nor";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "SBL1";
-					reg = <0x0 0x20000>;
-					read-only;
-				};
-
-				partition@20000 {
-					label = "MIBIB";
-					reg = <0x20000 0x20000>;
-					read-only;
-				};
-
-				partition@40000 {
-					label = "SBL2";
-					reg = <0x40000 0x40000>;
-					read-only;
-				};
-
-				partition@80000 {
-					label = "SBL3";
-					reg = <0x80000 0x80000>;
-					read-only;
-				};
-
-				partition@100000 {
-					label = "DDRCONFIG";
-					reg = <0x100000 0x10000>;
-					read-only;
-				};
-
-				partition@110000 {
-					label = "SSD";
-					reg = <0x110000 0x10000>;
-					read-only;
-				};
-
-				partition@120000 {
-					label = "TZ";
-					reg = <0x120000 0x80000>;
-					read-only;
-				};
-
-				partition@1a0000 {
-					label = "RPM";
-					reg = <0x1a0000 0x80000>;
-					read-only;
-				};
-
-				partition@220000 {
-					label = "APPSBL";
-					reg = <0x220000 0x80000>;
-					read-only;
-				};
-
-				partition@2a0000 {
-					label = "APPSBLENV";
-					reg = <0x2a0000 0x40000>;
-					read-only;
-				};
-
-				partition@2e0000 {
-					label = "OLDART";
-					reg = <0x2e0000 0x40000>;
-					read-only;
-				};
-
-				partition@320000 {
-					label = "firmware";
-					reg = <0x320000 0xc60000>;
-					compatible = "openwrt,uimage";
-					openwrt,offset = <512>; /* account for pad-extra 512 */
-				};
-
-				/* hole 0xf80000 - 0xfaf100 */
-
-				partition@faf100 {
-					label = "default-mac";
-					reg = <0xfaf100 0x00200>;
-					read-only;
-
-					compatible = "nvmem-cells";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					macaddr_defaultmac_0: macaddr@0 {
-						reg = <0x0 0x6>;
-					};
-				};
-
-				partition@fc0000 {
-					label = "ART";
-					reg = <0xfc0000 0x40000>;
-					read-only;
-
-					compatible = "nvmem-cells";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					precal_ART_1000: precal@1000 {
-						reg = <0x1000 0x2f20>;
-					};
-
-					precal_ART_5000: precal@5000 {
-						reg = <0x5000 0x2f20>;
-					};
-				};
-			};
-		};
-	};
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&macaddr_defaultmac_0>, <&precal_ART_1000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-			mac-address-increment = <(-1)>;
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-	max-link-speed = <1>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&macaddr_defaultmac_0>, <&precal_ART_5000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	nvmem-cells = <&macaddr_defaultmac_0>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <1>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	nvmem-cells = <&macaddr_defaultmac_0>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
deleted file mode 100644
index 998dad55c5e5..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
+++ /dev/null
@@ -1,447 +0,0 @@
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "NEC Aterm WG2600HP";
-	compatible = "nec,wg2600hp", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-		led-upgrade = &power_green;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		bridge {
-			label = "bridge";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		converter {
-			label = "converter";
-			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		converter_green {
-			label = "green:converter";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_red: power_red {
-			label = "red:power";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		active_green {
-			label = "green:active";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		active_red {
-			label = "red:active";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_green: power_green {
-			label = "green:power";
-			gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		converter_red {
-			label = "red:converter";
-			gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g_green {
-			label = "green:wlan2g";
-			gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g_red {
-			label = "red:wlan2g";
-			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g_green {
-			label = "green:wlan5g";
-			gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g_red {
-			label = "red:wlan5g";
-			gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
-		};
-
-		tv_green {
-			label = "green:tv";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-		};
-
-		tv_red {
-			label = "red:tv";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&CPU_SPC {
-	status = "disabled";
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x06000000  /* PAD0_MODE */
-			0x0000c 0x00080080  /* PAD6_MODE */
-			0x000e4 0x0006a545  /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x0000004e  /* PORT0_STATUS */
-			0x00094 0x0000004e  /* PORT6_STATUS */
-			>;
-	};
-
-	ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	nvmem-cells = <&macaddr_PRODUCTDATA_6>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	nvmem-cells = <&macaddr_PRODUCTDATA_0>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gsbi5 {
-	status = "okay";
-
-	qcom,mode = <GSBI_PROT_SPI>;
-
-	spi@1a280000 {
-		status = "okay";
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-		flash@0 {
-			compatible = "jedec,spi-nor";
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				SBL1@0 {
-					label = "SBL1";
-					reg = <0x0 0x20000>;
-					read-only;
-				};
-
-				MIBIB@20000 {
-					label = "MIBIB";
-					reg = <0x20000 0x20000>;
-					read-only;
-				};
-
-				SBL2@40000 {
-					label = "SBL2";
-					reg = <0x40000 0x40000>;
-					read-only;
-				};
-
-				SBL3@80000 {
-					label = "SBL3";
-					reg = <0x80000 0x80000>;
-					read-only;
-				};
-
-				DDRCONFIG@100000 {
-					label = "DDRCONFIG";
-					reg = <0x100000 0x10000>;
-					read-only;
-				};
-
-				SSD@110000 {
-					label = "SSD";
-					reg = <0x110000 0x10000>;
-					read-only;
-				};
-
-				TZ@120000 {
-					label = "TZ";
-					reg = <0x120000 0x80000>;
-					read-only;
-				};
-
-				RPM@1a0000 {
-					label = "RPM";
-					reg = <0x1a0000 0x80000>;
-					read-only;
-				};
-
-				APPSBL@220000 {
-					label = "APPSBL";
-					reg = <0x220000 0x80000>;
-					read-only;
-				};
-
-				APPSBLENV@2a0000 {
-					label = "APPSBLENV";
-					reg = <0x2a0000 0x10000>;
-				};
-
-				PRODUCTDATA: PRODUCTDATA@2b0000 {
-					label = "PRODUCTDATA";
-					reg = <0x2b0000 0x30000>;
-					read-only;
-				};
-
-				ART@2e0000 {
-					label = "ART";
-					reg = <0x2e0000 0x40000>;
-					read-only;
-					compatible = "nvmem-cells";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					precal_ART_1000: precal@1000 {
-						reg = <0x1000 0x2f20>;
-					};
-
-					precal_ART_5000: precal@5000 {
-						reg = <0x5000 0x2f20>;
-					};
-				};
-
-				TP@320000 {
-					label = "TP";
-					reg = <0x320000 0x40000>;
-					read-only;
-				};
-
-				TINY@360000 {
-					label = "TINY";
-					reg = <0x360000 0x500000>;
-					read-only;
-				};
-
-				firmware@860000 {
-					compatible = "denx,uimage";
-					label = "firmware";
-					reg = <0x860000 0x17a0000>;
-				};
-			};
-		};
-	};
-};
-
-&usb3_0 {
-	status = "okay";
-
-	pinctrl-0 = <&usb_pwr_en_pins>;
-	pinctrl-names = "default";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-	max-link-speed = <1>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio16", "gpio54", "gpio24", "gpio25";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
-				"gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
-				"gpio64", "gpio65";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	spi_pins: spi_pins {
-		mux {
-			pins = "gpio18", "gpio19", "gpio21";
-			function = "gsbi5";
-			bias-pull-down;
-		};
-
-		data {
-			pins = "gpio18", "gpio19";
-			drive-strength = <10>;
-		};
-
-		cs {
-			pins = "gpio20";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-
-		clk {
-			pins = "gpio21";
-			drive-strength = <12>;
-		};
-	};
-
-	usb_pwr_en_pins: usb_pwr_en_pins {
-		mux {
-			pins = "gpio22";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-};
-
-&PRODUCTDATA {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_PRODUCTDATA_0: macaddr@0 {
-		reg = <0x0 0x6>;
-	};
-
-	macaddr_PRODUCTDATA_6: macaddr@6 {
-		reg = <0x6 0x6>;
-	};
-
-	macaddr_PRODUCTDATA_c: macaddr@c {
-		reg = <0xc 0x6>;
-	};
-
-	macaddr_PRODUCTDATA_12: macaddr@12 {
-		reg = <0x12 0x6>;
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
deleted file mode 100644
index d7f3a7f88146..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
+++ /dev/null
@@ -1,465 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- *  Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
- *  Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
- *  All rights reserved.
- */
-
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	compatible = "compex,wpq864", "qcom,ipq8064";
-	model = "Compex WPQ864";
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-		ethernet0 = &gmac1;
-		ethernet1 = &gmac0;
-
-		led-boot = &led_pass;
-		led-failsafe = &led_fail;
-		led-running = &led_pass;
-		led-upgrade = &led_pass;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		rss4 {
-			label = "green:rss4";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		rss3 {
-			label = "green:rss3";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		rss2 {
-			label = "orange:rss2";
-			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
-		};
-
-		rss1 {
-			label = "red:rss1";
-			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_pass: pass {
-			label = "green:pass";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_fail: fail {
-			label = "green:fail";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb {
-			label = "green:usb";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb-pcie {
-			label = "green:usb-pcie";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	beeper {
-		compatible = "gpio-beeper";
-
-		pinctrl-0 = <&beeper_pins>;
-		pinctrl-names = "default";
-
-		gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&rpm {
-	pinctrl-0 = <&rpm_pins>;
-	pinctrl-names = "default";
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	mt29f2g08abbeah4@0 {
-		compatible = "qcom,nandcs";
-
-		reg = <0>;
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		nand-is-boot-medium;
-		qcom,boot_pages_size = <0x1180000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			SBL1@0 {
-				label = "SBL1";
-				reg = <0x0000000 0x0040000>;
-				read-only;
-			};
-
-			MIBIB@40000 {
-				label = "MIBIB";
-				reg = <0x0040000 0x0140000>;
-				read-only;
-			};
-
-			SBL2@180000 {
-				label = "SBL2";
-				reg = <0x0180000 0x0140000>;
-				read-only;
-			};
-
-			SBL3@2c0000 {
-				label = "SBL3";
-				reg = <0x02c0000 0x0280000>;
-				read-only;
-			};
-
-			DDRCONFIG@540000 {
-				label = "DDRCONFIG";
-				reg = <0x0540000 0x0120000>;
-				read-only;
-			};
-
-			SSD@660000 {
-				label = "SSD";
-				reg = <0x0660000 0x0120000>;
-				read-only;
-			};
-
-			TZ@780000 {
-				label = "TZ";
-				reg = <0x0780000 0x0280000>;
-				read-only;
-			};
-
-			RPM@a00000 {
-				label = "RPM";
-				reg = <0x0a00000 0x0280000>;
-				read-only;
-			};
-
-			APPSBL@c80000 {
-				label = "APPSBL";
-				reg = <0x0c80000 0x0500000>;
-				read-only;
-			};
-
-			APPSBLENV@1180000 {
-				label = "APPSBLENV";
-				reg = <0x1180000 0x0080000>;
-			};
-
-			ART@1200000 {
-				label = "ART";
-				reg = <0x1200000 0x0140000>;
-			};
-
-			ubi@1340000 {
-				label = "ubi";
-				reg = <0x1340000 0x4000000>;
-			};
-
-			BOOTCONFIG@5340000 {
-				label = "BOOTCONFIG";
-				reg = <0x5340000 0x0060000>;
-			};
-
-			SBL2-1@53a0000- {
-				label = "SBL2_1";
-				reg = <0x53a0000 0x0140000>;
-				read-only;
-			};
-
-			SBL3-1@54e0000 {
-				label = "SBL3_1";
-				reg = <0x54e0000 0x0280000>;
-				read-only;
-			};
-
-			DDRCONFIG-1@5760000 {
-				label = "DDRCONFIG_1";
-				reg = <0x5760000 0x0120000>;
-				read-only;
-			};
-
-			SSD-1@5880000 {
-				label = "SSD_1";
-				reg = <0x5880000 0x0120000>;
-				read-only;
-			};
-
-			TZ-1@59a0000 {
-				label = "TZ_1";
-				reg = <0x59a0000 0x0280000>;
-				read-only;
-			};
-
-			RPM-1@5c20000 {
-				label = "RPM_1";
-				reg = <0x5c20000 0x0280000>;
-				read-only;
-			};
-
-			BOOTCONFIG1@5ea0000 {
-				label = "BOOTCONFIG1";
-				reg = <0x5ea0000 0x0060000>;
-			};
-
-			APPSBL-1@5f00000 {
-				label = "APPSBL_1";
-				reg = <0x5f00000 0x0500000>;
-				read-only;
-			};
-
-			ubi-1@6400000 {
-				label = "ubi_1";
-				reg = <0x6400000 0x4000000>;
-			};
-
-			unused@a400000 {
-				label = "unused";
-				reg = <0xa400000 0x5c00000>;
-			};
-		};
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-
-	ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gsbi4_serial {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-};
-
-&flash {
-	compatible = "jedec,spi-nor";
-};
-
-&sata_phy {
-	status = "disabled";
-};
-
-&sata {
-	status = "disabled";
-};
-
-&ss_phy_0 {		/* USB3 port 0 SS phy */
-	status = "okay";
-
-	rx_eq = <2>;
-	tx_deamp_3_5db = <32>;
-	mpll = <160>;
-};
-
-&ss_phy_1 {		/* USB3 port 1 SS phy */
-	status = "okay";
-
-	rx_eq = <2>;
-	tx_deamp_3_5db = <32>;
-	mpll = <160>;
-};
-
-&pcie0 {
-	status = "okay";
-
-	/delete-property/ pinctrl-0;
-	/delete-property/ pinctrl-names;
-	/delete-property/ perst-gpios;
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-
-	/delete-property/ pinctrl-0;
-	/delete-property/ pinctrl-names;
-	/delete-property/ perst-gpios;
-};
-
-&qcom_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: pinctrl0 {
-		pcie0_pcie2_perst {
-			pins = "gpio3";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio7", "gpio8", "gpio9", "gpio22",
-			       "gpio23", "gpio24", "gpio25", "gpio53";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	button_pins: button_pins {
-		mux {
-			pins = "gpio54";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	beeper_pins: beeper_pins {
-		mux {
-			pins = "gpio55";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	rpm_pins: rpm_pins {
-		mux {
-			pins = "gpio12", "gpio13";
-			function = "gsbi4";
-			drive-strength = <10>;
-			bias-disable;
-		};
-	};
-
-	uart0_pins: uart0_pins {
-		mux {
-			pins = "gpio10", "gpio11";
-			function = "gsbi4";
-			drive-strength = <10>;
-			bias-disable;
-		};
-	};
-
-	spi_pins: spi_pins {
-		mux {
-			pins = "gpio18", "gpio19";
-			function = "gsbi5";
-			drive-strength = <10>;
-			bias-pull-down;
-		};
-
-		clk {
-			pins = "gpio21";
-			function = "gsbi5";
-			drive-strength = <12>;
-			bias-pull-down;
-		};
-
-		cs {
-			pins = "gpio20";
-			function = "gpio";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&tcsr {
-	qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
deleted file mode 100644
index 04a2261929da..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
+++ /dev/null
@@ -1,526 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Buffalo WXR-2533DHP";
-	compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
-
-	memory@42000000 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &diag;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	chosen {
-		/* use "ubi_rootfs" volume in "ubi" partition as rootfs */
-		bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		usb {
-			label = "green:usb";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "usbport";
-			trigger-sources = <&hub_port0 &hub_port1>;
-		};
-
-		guestport {
-			label = "green:guestport";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		diag: diag {
-			label = "orange:diag";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		internet_orange {
-			label = "orange:internet";
-			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
-		};
-
-		internet_white {
-			label = "white:internet";
-			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		wireless_orange {
-			label = "orange:wireless";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		wireless_white {
-			label = "white:wireless";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-		};
-
-		router_orange {
-			label = "orange:router";
-			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
-		};
-
-		router_white {
-			label = "white:router";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
-		};
-
-		power: power {
-			label = "white:power";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		power {
-			label = "power";
-			gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		eject {
-			label = "eject";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_EJECTCD>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		guest {
-			label = "guest";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		ap {
-			label = "ap";
-			gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_1>;
-			linux,input-type = <EV_SW>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		router {
-			label = "router";
-			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_1>;
-			linux,input-type = <EV_SW>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		auto {
-			label = "auto";
-			gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_1>;
-			linux,input-type = <EV_SW>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	cs@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ubi@0 {
-				label = "ubi";
-				reg = <0x0000000 0x4000000>;
-			};
-
-			rootfs_1@4000000 {
-				label = "rootfs_1";
-				reg = <0x4000000 0x4000000>;
-			};
-		};
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x07600000  /* PAD0_MODE */
-			0x00008 0x01000000  /* PAD5_MODE */
-			0x0000c 0x00000080  /* PAD6_MODE */
-			0x00050 0xcc35cc35  /* LED_CTRL0 */
-			0x00054 0xca35ca35  /* LED_CTRL1 */
-			0x00058 0xc935c935  /* LED_CTRL2 */
-			0x0005c 0x03ffff00  /* LED_CTRL3 */
-			0x000e4 0x0006a545  /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x0000007e  /* PORT0_STATUS */
-			0x00094 0x0000007e  /* PORT6_STATUS */
-			>;
-	};
-
-	ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	nvmem-cells = <&macaddr_ART_6>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	nvmem-cells = <&macaddr_ART_0>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gsbi4_serial {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-};
-
-&gsbi5 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_SPI>;
-
-	spi@1a280000 {
-		status = "okay";
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-		flash@0 {
-			compatible = "jedec,spi-nor";
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				SBL1@0 {
-					label = "SBL1";
-					reg = <0x0 0x10000>;
-					read-only;
-				};
-
-				MIBIB@10000 {
-					label = "MIBIB";
-					reg = <0x10000 0x20000>;
-					read-only;
-				};
-
-				SBL2@30000 {
-					label = "SBL2";
-					reg = <0x30000 0x30000>;
-					read-only;
-				};
-
-				SBL3@60000 {
-					label = "SBL3";
-					reg = <0x60000 0x30000>;
-					read-only;
-				};
-
-				DDRCONFIG@90000 {
-					label = "DDRCONFIG";
-					reg = <0x90000 0x10000>;
-					read-only;
-				};
-
-				SSD@a0000 {
-					label = "SSD";
-					reg = <0xa0000 0x10000>;
-					read-only;
-				};
-
-				TZ@b0000 {
-					label = "TZ";
-					reg = <0xb0000 0x30000>;
-					read-only;
-				};
-
-				RPM@e0000 {
-					label = "RPM";
-					reg = <0xe0000 0x20000>;
-					read-only;
-				};
-
-				APPSBL@100000 {
-					label = "APPSBL";
-					reg = <0x100000 0x70000>;
-					read-only;
-				};
-
-				APPSBLENV@170000 {
-					label = "APPSBLENV";
-					reg = <0x170000 0x10000>;
-					read-only;
-				};
-
-				ART@180000 {
-					label = "ART";
-					reg = <0x180000 0x40000>;
-					read-only;
-
-					compatible = "nvmem-cells";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					macaddr_ART_0: macaddr@0 {
-						reg = <0x0 0x6>;
-					};
-
-					macaddr_ART_6: macaddr@6 {
-						reg = <0x6 0x6>;
-					};
-
-					macaddr_ART_18: macaddr@18 {
-						reg = <0x18 0x6>;
-					};
-
-					macaddr_ART_1e: macaddr@1e {
-						reg = <0x1e 0x6>;
-					};
-
-					precal_ART_1000: precal@1000 {
-						reg = <0x1000 0x2f20>;
-					};
-
-					precal_ART_5000: precal@5000 {
-						reg = <0x5000 0x2f20>;
-					};
-				};
-
-				BOOTCONFIG@1c0000 {
-					label = "BOOTCONFIG";
-					reg = <0x1c0000 0x10000>;
-					read-only;
-				};
-
-				APPSBL_1@1d0000 {
-					label = "APPSBL_1";
-					reg = <0x1d0000 0x70000>;
-					read-only;
-				};
-			};
-		};
-	};
-};
-
-&usb3_0 {
-	status = "okay";
-
-	pinctrl-0 = <&usb_pwr_en_pins>;
-	pinctrl-names = "default";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&dwc3_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hub_port0: port@1 {
-		reg = <1>;
-		#trigger-source-cells = <0>;
-	};
-};
-
-&dwc3_1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hub_port1: port@1 {
-		reg = <1>;
-		#trigger-source-cells = <0>;
-	};
-};
-
-&pcie0 {
-	status = "okay";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&macaddr_ART_1e>, <&precal_ART_1000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-	max-link-speed = <1>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&macaddr_ART_18>, <&precal_ART_5000>;
-			nvmem-cell-names = "mac-address", "pre-calibration";
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57",
-				"gpio58", "gpio64", "gpio65";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22",
-				"gpio23", "gpio24", "gpio25", "gpio26", "gpio53";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	uart0_pins: uart0_pins {
-		mux {
-			pins = "gpio10", "gpio11";
-			function = "gsbi4";
-			drive-strength = <12>;
-			bias-disable;
-		};
-	};
-
-	spi_pins: spi_pins {
-		mux {
-			pins = "gpio18", "gpio19", "gpio21";
-			function = "gsbi5";
-			bias-pull-down;
-		};
-
-		data {
-			pins = "gpio18", "gpio19";
-			drive-strength = <10>;
-		};
-
-		cs{
-			pins = "gpio20";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-
-		clk {
-			pins = "gpio21";
-			drive-strength = <12>;
-		};
-	};
-
-	usb_pwr_en_pins: usb_pwr_en_pins {
-		mux{
-			pins = "gpio68";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-			output-high;
-		};
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
deleted file mode 100644
index 969ca724e3ae..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
+++ /dev/null
@@ -1,316 +0,0 @@
-#include "qcom-ipq8065.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "ZyXEL NBG6817";
-	compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-		sdcc1 = &sdcc1;
-
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	chosen {
-		bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1";
-		append-rootblock = "root=/dev/mmcblk0p";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-			linux,input-type = <EV_SW>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		internet {
-			label = "white:internet";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-		};
-
-		power: power {
-			label = "white:power";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		wifi2g {
-			label = "amber:wifi2g";
-			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
-		};
-
-		/* wifi2g amber from the manual is missing */
-
-		wifi5g {
-			label = "amber:wifi5g";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		/* wifi5g amber from the manual is missing */
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio53", "gpio54", "gpio65";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio9", "gpio26", "gpio33", "gpio64";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	mdio0_pins: mdio0_pins {
-		clk {
-			pins = "gpio1";
-			input-disable;
-		};
-	};
-
-	rgmii2_pins: rgmii2_pins {
-		tx {
-			pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
-			input-disable;
-		};
-	};
-
-	spi_pins: spi_pins {
-		cs {
-			pins = "gpio20";
-			drive-strength = <12>;
-		};
-	};
-
-	usb0_pwr_en_pins: usb0_pwr_en_pins {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "gpio";
-			drive-strength = <12>;
-		};
-
-		pwr {
-			pins = "gpio17";
-			bias-pull-down;
-			output-high;
-		};
-
-		ovc {
-			pins = "gpio16";
-			bias-pull-up;
-		};
-	};
-
-	usb1_pwr_en_pins: usb1_pwr_en_pins {
-		mux {
-			pins = "gpio14", "gpio15";
-			function = "gpio";
-			drive-strength = <12>;
-		};
-
-		pwr {
-			pins = "gpio14";
-			bias-pull-down;
-			output-high;
-		};
-
-		ovc {
-			pins = "gpio15";
-			bias-pull-up;
-		};
-	};
-};
-
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_SPI>;
-	status = "okay";
-
-	spi4: spi@1a280000 {
-		status = "okay";
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-		m25p80@0 {
-			compatible = "jedec,spi-nor";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			spi-max-frequency = <51200000>;
-			reg = <0>;
-
-			partitions {
-				compatible = "qcom,smem-part";
-			};
-		};
-	};
-};
-
-&usb3_0 {
-	status = "okay";
-
-	pinctrl-0 = <&usb0_pwr_en_pins>;
-	pinctrl-names = "default";
-};
-
-&usb3_1 {
-	status = "okay";
-
-	pinctrl-0 = <&usb1_pwr_en_pins>;
-	pinctrl-names = "default";
-};
-
-&pcie0 {
-	status = "okay";
-	reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&pcie0_pins>;
-	pinctrl-names = "default";
-};
-
-&pcie1 {
-	status = "okay";
-	reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&pcie1_pins>;
-	pinctrl-names = "default";
-	max-link-speed = <1>;
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0xaa545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
-			0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
-			0x00978 0x19008643  /* QM_PORT1_CTRL0 */
-			0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
-			0x00980 0x19008643  /* QM_PORT2_CTRL0 */
-			0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
-			0x00988 0x19008643  /* QM_PORT3_CTRL0 */
-			0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
-			0x00990 0x19008643  /* QM_PORT4_CTRL0 */
-			0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
-			0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
-			0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
-			0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
-			0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
-			>;
-	};
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-		qca,ar8327-initvals = <
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x0000c 0x80        /* PAD6_MODE */
-			>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <0>;
-	qcom,rgmii_delay = <1>;
-	qcom,phy_mii_type = <0>;
-	qcom,emulation = <0>;
-	qcom,irq = <255>;
-	mdiobus = <&mdio0>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-	qcom,phy_mdio_addr = <0>;	/* none */
-	qcom,poll_required = <0>;	/* no polling */
-	qcom,rgmii_delay = <0>;
-	qcom,phy_mii_type = <1>;
-	qcom,emulation = <0>;
-	qcom,irq = <258>;
-	mdiobus = <&mdio0>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&amba {
-	sdcc1: sdcc@12400000 {
-		status = "okay";
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi
deleted file mode 100644
index c899fa7c754b..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi
+++ /dev/null
@@ -1,453 +0,0 @@
-#include "qcom-ipq8065.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	reserved-memory {
-		rsvd@5fe00000 {
-			reg = <0x5fe00000 0x200000>;
-			reusable;
-		};
-
-		ramoops@42100000 {
-			compatible = "ramoops";
-			reg = <0x42100000 0x40000>;
-			record-size = <0x4000>;
-			console-size = <0x4000>;
-			ftrace-size = <0x4000>;
-			pmsg-size = <0x4000>;
-		};
-	};
-
-	aliases {
-		label-mac-device = &gmac2;
-
-		led-boot = &power_white;
-		led-failsafe = &power_amber;
-		led-running = &power_white;
-		led-upgrade = &power_amber;
-
-		mdio-gpio0 = &mdio0;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		power_white: power_white {
-			label = "white:power";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		power_amber: power_amber {
-			label = "amber:power";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_white {
-			label = "white:wan";
-			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_amber {
-			label = "amber:wan";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		wifi {
-			label = "white:wifi";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "white:wps";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio6", "gpio54", "gpio65";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio7", "gpio8", "gpio9",
-				"gpio22", "gpio23", "gpio24",
-				"gpio26", "gpio53", "gpio64";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	mdio0_pins: mdio0_pins {
-		clk {
-			pins = "gpio1";
-			input-disable;
-		};
-	};
-
-	rgmii2_pins: rgmii2_pins {
-		tx {
-			pins = "gpio27", "gpio28", "gpio29",
-				"gpio30", "gpio31", "gpio32";
-			input-disable;
-		};
-	};
-
-	spi_pins: spi_pins {
-		mux {
-			pins = "gpio18", "gpio19", "gpio21";
-			function = "gsbi5";
-			bias-pull-down;
-		};
-
-		data {
-			pins = "gpio18", "gpio19";
-			drive-strength = <10>;
-		};
-
-		cs {
-			pins = "gpio20";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-
-		clk {
-			pins = "gpio21";
-			drive-strength = <12>;
-		};
-	};
-
-	spi6_pins: spi6_pins {
-		mux {
-			pins = "gpio55", "gpio56", "gpio58";
-			function = "gsbi6";
-			bias-pull-down;
-		};
-
-		mosi {
-			pins = "gpio55";
-			drive-strength = <12>;
-		};
-
-		miso {
-			pins = "gpio56";
-			drive-strength = <14>;
-		};
-
-		cs {
-			pins = "gpio57";
-			drive-strength = <12>;
-			bias-pull-up;
-		};
-
-		clk {
-			pins = "gpio58";
-			drive-strength = <12>;
-		};
-
-		reset {
-			pins = "gpio33";
-			drive-strength = <10>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-
-	usb0_pwr_en_pins: usb0_pwr_en_pins {
-		mux {
-			pins = "gpio15";
-			function = "gpio";
-			drive-strength = <12>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-
-	usb1_pwr_en_pins: usb1_pwr_en_pins {
-		mux {
-			pins = "gpio16", "gpio68";
-			function = "gpio";
-			drive-strength = <12>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		nand-is-boot-medium;
-		qcom,boot_pages_size = <0x1180000>;
-
-		partitions: partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "qcadata";
-				reg = <0x0000000 0x0c80000>;
-				read-only;
-			};
-
-			partition@c80000 {
-				label = "APPSBL";
-				reg = <0x0c80000 0x0500000>;
-				read-only;
-			};
-
-			partition@1180000 {
-				label = "APPSBLENV";
-				reg = <0x1180000 0x0080000>;
-				read-only;
-			};
-
-			art: partition@1200000 {
-				label = "art";
-				reg = <0x1200000 0x0140000>;
-				read-only;
-				compatible = "nvmem-cells";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				macaddr_art_0: macaddr@0 {
-					reg = <0x0 0x6>;
-				};
-
-				macaddr_art_6: macaddr@6 {
-					reg = <0x6 0x6>;
-				};
-
-				precal_art_1000: precal@1000 {
-					reg = <0x1000 0x2f20>;
-				};
-
-				precal_art_5000: precal@5000 {
-					reg = <0x5000 0x2f20>;
-				};
-			};
-
-			partition@1340000 {
-				label = "artbak";
-				reg = <0x1340000 0x0140000>;
-				read-only;
-			};
-
-			partition@1480000 {
-				label = "kernel";
-				reg = <0x1480000 0x0400000>;
-			};
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0xaa545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
-			0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
-			0x00978 0x19008643  /* QM_PORT1_CTRL0 */
-			0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
-			0x00980 0x19008643  /* QM_PORT2_CTRL0 */
-			0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
-			0x00988 0x19008643  /* QM_PORT3_CTRL0 */
-			0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
-			0x00990 0x19008643  /* QM_PORT4_CTRL0 */
-			0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
-			0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
-			0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
-			0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
-			0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
-			>;
-		qca,ar8327-vlans = <
-			0x1	0x5e	    /* VLAN1 Ports 1/2/3/4/6 */
-			0x2	0x21	    /* VLAN2 Ports 0/5 */
-		>;
-	};
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-		qca,ar8327-initvals = <
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x0000c 0x80        /* PAD6_MODE */
-			>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <0>;
-	qcom,rgmii_delay = <1>;
-	qcom,phy_mii_type = <0>;
-	qcom,emulation = <0>;
-	qcom,irq = <255>;
-	mdiobus = <&mdio0>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	nvmem-cells = <&macaddr_art_6>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-	qcom,phy_mdio_addr = <0>;	/* none */
-	qcom,poll_required = <0>;	/* no polling */
-	qcom,rgmii_delay = <0>;
-	qcom,phy_mii_type = <1>;
-	qcom,emulation = <0>;
-	qcom,irq = <258>;
-	mdiobus = <&mdio0>;
-
-	nvmem-cells = <&macaddr_art_0>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&sata_phy {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&usb3_0 {
-	status = "okay";
-
-	pinctrl-0 = <&usb0_pwr_en_pins>;
-	pinctrl-names = "default";
-};
-
-&usb3_1 {
-	status = "okay";
-
-	pinctrl-0 = <&usb1_pwr_en_pins>;
-	pinctrl-names = "default";
-};
-
-&pcie0 {
-	status = "okay";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi0: wifi@1,0 {
-			compatible = "pci168c,0046";
-			reg = <0x00010000 0 0 0 0>;
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-
-	max-link-speed = <1>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi1: wifi@1,0 {
-			compatible = "pci168c,0046";
-			reg = <0x00010000 0 0 0 0>;
-		};
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
deleted file mode 100644
index bf7c963944b7..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-#include "qcom-ipq8065-nighthawk.dtsi"
-
-/ {
-	model = "Netgear Nighthawk X4S R7800";
-	compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
-};
-
-&leds {
-	usb1 {
-		label = "white:usb1";
-		gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	usb2 {
-		label = "white:usb2";
-		gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-	};
-
-	esata {
-		label = "white:esata";
-		gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&partitions {
-	partition@1880000 {
-		label = "ubi";
-		reg = <0x1880000 0x6080000>;
-	};
-
-	partition@7900000 {
-		label = "reserve";
-		reg = <0x7900000 0x0700000>;
-		read-only;
-	};
-};
-
-&wifi0 {
-	nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
-	nvmem-cell-names = "mac-address", "pre-calibration";
-	mac-address-increment = <(1)>;
-};
-
-&wifi1 {
-	nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
-	nvmem-cell-names = "mac-address", "pre-calibration";
-	mac-address-increment = <(2)>;
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
deleted file mode 100644
index 96163331f32e..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
+++ /dev/null
@@ -1,403 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq8065.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Askey RT4230W REV6";
-	compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x3e000000>;
-		device_type = "memory";
-	};
-
-	aliases {
-		led-boot = &ledctrl3;
-		led-failsafe = &ledctrl1;
-		led-running = &ledctrl2;
-		led-upgrade = &ledctrl3;
-	};
-
-	chosen {
-		bootargs = "rootfstype=squashfs noinitrd";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		ledctrl1: ledctrl1 {
-			label = "ledctrl1";
-			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		ledctrl2: ledctrl2 {
-			label = "ledctrl2";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		ledctrl3: ledctrl3 {
-			label = "ledctrl3";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio54", "gpio68";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio22", "gpio23", "gpio24";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	rgmii2_pins: rgmii2_pins {
-		mux {
-			pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31",
-				"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
-			function = "rgmii2";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		tx {
-			pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
-			input-disable;
-		};
-	};
-
-	spi_pins: spi_pins {
-		cs {
-			pins = "gpio20";
-			drive-strength = <12>;
-		};
-	};
-};
-
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_SPI>;
-	status = "okay";
-
-	spi@1a280000 {
-		status = "okay";
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-		flash@0 {
-			compatible = "everspin,mr25h256";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			spi-max-frequency = <40000000>;
-			reg = <0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x0000000 0x0040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "0:MIBIB";
-				reg = <0x0040000 0x0140000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "0:SBL2";
-				reg = <0x0180000 0x0140000>;
-				read-only;
-			};
-
-			partition@2c0000 {
-				label = "0:SBL3";
-				reg = <0x02c0000 0x0280000>;
-				read-only;
-			};
-
-			partition@540000 {
-				label = "0:DDRCONFIG";
-				reg = <0x0540000 0x0120000>;
-				read-only;
-			};
-
-			partition@660000 {
-				label = "0:SSD";
-				reg = <0x0660000 0x0120000>;
-				read-only;
-			};
-
-			partition@780000 {
-				label = "0:TZ";
-				reg = <0x0780000 0x0280000>;
-				read-only;
-			};
-
-			partition@a00000 {
-				label = "0:RPM";
-				reg = <0x0a00000 0x0280000>;
-				read-only;
-			};
-
-			partition@c80000 {
-				label = "0:APPSBL";
-				reg = <0x0c80000 0x0500000>;
-				read-only;
-			};
-
-			partition@1180000 {
-				label = "0:APPSBLENV";
-				reg = <0x1180000 0x0080000>;
-			};
-
-			partition@1200000 {
-				label = "0:ART";
-				reg = <0x1200000 0x0140000>;
-				read-only;
-				compatible = "nvmem-cells";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				macaddr_ART_0: macaddr@0 {
-					reg = <0x0 0x6>;
-				};
-
-				macaddr_ART_6: macaddr@6 {
-					reg = <0x6 0x6>;
-				};
-
-				precal_ART_1000: precal@1000 {
-					reg = <0x1000 0x2f20>;
-				};
-
-				precal_ART_5000: precal@5000 {
-					reg = <0x5000 0x2f20>;
-				};
-			};
-
-			partition@1340000 {
-				label = "0:BOOTCONFIG";
-				reg = <0x1340000 0x0060000>;
-				read-only;
-			};
-
-			partition@13a0000 {
-				label = "0:SBL2_1";
-				reg = <0x13a0000 0x0140000>;
-				read-only;
-			};
-
-			partition@14e0000 {
-				label = "0:SBL3_1";
-				reg = <0x14e0000 0x0280000>;
-				read-only;
-			};
-
-			partition@1760000 {
-				label = "0:DDRCONFIG_1";
-				reg = <0x1760000 0x0120000>;
-				read-only;
-			};
-
-			partition@1880000 {
-				label = "0:SSD_1";
-				reg = <0x1880000 0x0120000>;
-				read-only;
-			};
-
-			partition@19a0000 {
-				label = "0:TZ_1";
-				reg = <0x19a0000 0x0280000>;
-				read-only;
-			};
-
-			partition@1c20000 {
-				label = "0:RPM_1";
-				reg = <0x1c20000 0x0280000>;
-				read-only;
-			};
-
-			partition@1ea0000 {
-				label = "0:BOOTCONFIG1";
-				reg = <0x1ea0000 0x0060000>;
-				read-only;
-			};
-
-			partition@1f00000 {
-				label = "0:APPSBL_1";
-				reg = <0x1f00000 0x0500000>;
-				read-only;
-			};
-
-			partition@2400000 {
-				label = "ubi";
-				reg = <0x2400000 0x1a000000>;
-			};
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0x0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0xaa545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			0x00050 0xcf02cf02  /* LED_CTRL_0 */
-			0x00054 0xc832c832  /* LED_CTRL_1 */
-			>;
-	};
-};
-
-&gmac0 {
-	status = "okay";
-	phy-mode = "rgmii";
-	qcom,id = <0>;
-
-	nvmem-cells = <&macaddr_ART_0>;
-	nvmem-cell-names = "mac-address";
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <1>;
-
-	nvmem-cells = <&macaddr_ART_6>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-	reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
-	pinctrl-0 = <&pcie0_pins>;
-	pinctrl-names = "default";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi0: wifi@1,0 {
-			compatible = "pci168c,0046";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&precal_ART_1000>;
-			nvmem-cell-names = "pre-calibration";
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-	reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
-	pinctrl-0 = <&pcie1_pins>;
-	pinctrl-names = "default";
-	max-link-speed = <1>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi1: wifi@1,0 {
-			compatible = "pci168c,0046";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&precal_ART_5000>;
-			nvmem-cell-names = "pre-calibration";
-		};
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts
deleted file mode 100644
index 871cc095020a..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts
+++ /dev/null
@@ -1,425 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq8065.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Arris TR4400 v2";
-	compatible = "arris,tr4400-v2", "qcom,ipq8065", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	aliases {
-		led-boot = &led_status_blue;
-		led-failsafe = &led_status_red;
-		led-running = &led_status_blue;
-		led-upgrade = &led_status_red;
-	};
-
-	chosen {
-		bootargs = "rootfstype=squashfs noinitrd";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		led_status_red: status_red {
-			label = "red:status";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_status_blue: status_blue {
-			label = "blue:status";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio6", "gpio54";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio7", "gpio8";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	rgmii2_pins: rgmii2_pins {
-		tx {
-			pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
-			input-disable;
-		};
-	};
-
-	spi_pins: spi_pins {
-		cs {
-			pins = "gpio20";
-			drive-strength = <12>;
-		};
-	};
-};
-
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_SPI>;
-	status = "okay";
-
-	spi@1a280000 {
-		status = "okay";
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-		flash@0 {
-			compatible = "everspin,mr25h256";
-			spi-max-frequency = <40000000>;
-			reg = <0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x0000000 0x0040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "0:MIBIB";
-				reg = <0x0040000 0x0140000>;
-				read-only;
-			};
-			partition@180000 {
-				label = "0:SBL2";
-				reg = <0x0180000 0x0140000>;
-				read-only;
-			};
-			partition@2c0000 {
-				label = "0:SBL3";
-				reg = <0x02c0000 0x0280000>;
-				read-only;
-			};
-			partition@540000 {
-				label = "0:DDRCONFIG";
-				reg = <0x0540000 0x0120000>;
-				read-only;
-			};
-			partition@660000 {
-				label = "0:SSD";
-				reg = <0x0660000 0x0120000>;
-				read-only;
-			};
-			partition@780000 {
-				label = "0:TZ";
-				reg = <0x0780000 0x0280000>;
-				read-only;
-			};
-			partition@a00000 {
-				label = "0:RPM";
-				reg = <0x0a00000 0x0280000>;
-				read-only;
-			};
-			partition@c80000 {
-				label = "0:APPSBL";
-				reg = <0x0c80000 0x0500000>;
-				read-only;
-			};
-			partition@1180000 {
-				label = "0:APPSBLENV";
-				reg = <0x1180000 0x0080000>;
-			};
-			partition@1200000 {
-				label = "0:ART";
-				reg = <0x1200000 0x0140000>;
-				read-only;
-
-				compatible = "nvmem-cells";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				precal_ART_1000: precal@1000 {
-					reg = <0x1000 0x2f20>;
-				};
-				precal_ART_5000: precal@5000 {
-					reg = <0x5000 0x2f20>;
-				};
-			};
-			stock_partition@1340000 {
-				label = "stock_rootfs";
-				reg = <0x1340000 0x4000000>;
-			};
-			partition@5340000 {
-				label = "0:BOOTCONFIG";
-				reg = <0x5340000 0x0060000>;
-				read-only;
-			};
-			partition@53a0000 {
-				label = "0:SBL2_1";
-				reg = <0x53a0000 0x0140000>;
-				read-only;
-			};
-			partition@54e0000 {
-				label = "0:SBL3_1";
-				reg = <0x54e0000 0x0280000>;
-				read-only;
-			};
-			partition@5760000 {
-				label = "0:DDRCONFIG_1";
-				reg = <0x5760000 0x0120000>;
-				read-only;
-			};
-			partition@5880000 {
-				label = "0:SSD_1";
-				reg = <0x5880000 0x0120000>;
-				read-only;
-			};
-			partition@59a0000 {
-				label = "0:TZ_1";
-				reg = <0x59a0000 0x0280000>;
-				read-only;
-			};
-			partition@5c20000 {
-				label = "0:RPM_1";
-				reg = <0x5c20000 0x0280000>;
-				read-only;
-			};
-			partition@5ea0000 {
-				label = "0:BOOTCONFIG1";
-				reg = <0x5ea0000 0x0060000>;
-				read-only;
-			};
-			partition@5f00000 {
-				label = "0:APPSBL_1";
-				reg = <0x5f00000 0x0500000>;
-				read-only;
-			};
-			stock_partition@6400000 {
-				label = "stock_rootfs_1";
-				reg = <0x6400000 0x4000000>;
-			};
-			stock_partition@a400000 {
-				label = "stock_fw_env";
-				reg = <0xa400000 0x0100000>;
-			};
-			stock_partition@a500000 {
-				label = "stock_config";
-				reg = <0xa500000 0x0800000>;
-			};
-			stock_partition@ad00000 {
-				label = "stock_PKI";
-				reg = <0xad00000 0x0200000>;
-			};
-			stock_partition@af00000 {
-				label = "stock_scfgmgr";
-				reg = <0xaf00000 0x0100000>;
-			};
-
-			partition@6400000 {
-				label = "fw_env";
-				reg = <0x6400000 0x0100000>;
-
-				compatible = "nvmem-cells";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				macaddr_fw_env_0: macaddr@0 {
-					reg = <0x00 0x6>;
-				};
-				macaddr_fw_env_6: macaddr@6 {
-					reg = <0x06 0x6>;
-				};
-				macaddr_fw_env_c: macaddr@c {
-					reg = <0x0c 0x6>;
-				};
-				macaddr_fw_env_12: macaddr@12 {
-					reg = <0x12 0x6>;
-				};
-				macaddr_fw_env_18: macaddr@18 {
-					reg = <0x18 0x6>;
-				};
-			};
-			partition@6500000 {
-				label = "ubi";
-				reg = <0x6500000 0x9b00000>;
-			};
-			partition@1340000 {
-				label = "extra";
-				reg = <0x1340000 0x4000000>;
-			};
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	ethernet-phy@0 {
-		reg = <0x0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0xaa545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-
-	phy7: ethernet-phy@7 {
-		reg = <7>;
-	};
-};
-
-&gmac0 {
-	status = "okay";
-	phy-mode = "rgmii";
-	qcom,id = <0>;
-
-	nvmem-cells = <&macaddr_fw_env_18>;
-	nvmem-cell-names = "mac-address";
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <1>;
-
-	nvmem-cells = <&macaddr_fw_env_0>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac3 {
-	status = "okay";
-	phy-mode = "sgmii";
-	qcom,id = <3>;
-	phy-handle = <&phy7>;
-
-	nvmem-cells = <&macaddr_fw_env_6>;
-	nvmem-cell-names = "mac-address";
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-	reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
-	pinctrl-0 = <&pcie0_pins>;
-	pinctrl-names = "default";
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi0: wifi@1,0 {
-			compatible = "pci168c,0046";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&precal_ART_1000>, <&macaddr_fw_env_12>;
-			nvmem-cell-names = "pre-calibration", "mac-address";
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-	reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
-	pinctrl-0 = <&pcie1_pins>;
-	pinctrl-names = "default";
-	max-link-speed = <1>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi1: wifi@1,0 {
-			compatible = "pci168c,0040";
-			reg = <0x00010000 0 0 0 0>;
-
-			nvmem-cells = <&precal_ART_5000>, <&macaddr_fw_env_c>;
-			nvmem-cell-names = "pre-calibration", "mac-address";
-		};
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-xr500.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-xr500.dts
deleted file mode 100644
index f584735e155e..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065-xr500.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8065-nighthawk.dtsi"
-
-/ {
-	model = "Netgear Nighthawk XR500";
-	compatible = "netgear,xr500", "qcom,ipq8065", "qcom,ipq8064";
-
-};
-
-&leds {
-	usb1 {
-		label = "white:usb1";
-		gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-	};
-
-	usb2 {
-		label = "white:usb2";
-		gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&partitions {
-	partition@1880000 {
-		label = "ubi";
-		reg = <0x1880000 0xce00000>;
-	};
-
-	partition@e680000 {
-		label = "reserve";
-		reg = <0xe680000 0x0780000>;
-		read-only;
-	};
-};
-
-&wifi0 {
-	nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>;
-	nvmem-cell-names = "mac-address", "pre-calibration";
-};
-
-&wifi1 {
-	nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>;
-	nvmem-cell-names = "mac-address", "pre-calibration";
-};
-
-&art {
-	macaddr_art_c: macaddr@c {
-		reg = <0xc 0x6>;
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065.dtsi
deleted file mode 100644
index c70a5cbaed5f..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ /dev/null
@@ -1,167 +0,0 @@
-#include "qcom-ipq8064.dtsi"
-
-/ {
-	model = "Qualcomm IPQ8065";
-	compatible = "qcom,ipq8065", "qcom,ipq8064";
-
-	aliases {
-		serial0 = &gsbi4_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-};
-
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-
-	serial@16340000 {
-		status = "okay";
-	};
-	/*
-	* The i2c device on gsbi4 should not be enabled.
-	* On ipq806x designs gsbi4 i2c is meant for exclusive
-	* RPM usage. Turning this on in kernel manifests as
-	* i2c failure for the RPM.
-	*/
-};
-
-&pcie0 {
-	compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie1 {
-	compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie2 {
-	compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&sata {
-	ports-implemented = <0x1>;
-};
-
-&smb208_s2a {
-	regulator-min-microvolt = <775000>;
-	regulator-max-microvolt = <1275000>;
-};
-
-&smb208_s2b {
-	regulator-min-microvolt = <775000>;
-	regulator-max-microvolt = <1275000>;
-};
-
-&ss_phy_0 {
-	qcom,rx-eq = <2>;
-	qcom,tx-deamp_3_5db = <32>;
-	qcom,mpll = <5>;
-};
-
-&ss_phy_1 {
-	qcom,rx-eq = <2>;
-	qcom,tx-deamp_3_5db = <32>;
-	qcom,mpll = <5>;
-};
-
-&opp_table_l2 {
-	/delete-node/opp-1200000000;
-
-	opp-1400000000 {
-		opp-hz = /bits/ 64 <1400000000>;
-		opp-microvolt = <1150000>;
-		clock-latency-ns = <100000>;
-		opp-level = <2>;
-	};
-};
-
-&opp_table0 {
-	/* 
-	 * On ipq8065 1.2 ghz freq is not present
-	 * Remove it to make cpufreq work and not
-	 * complain for missing definition
-	 */
-
-	/delete-node/opp-1200000000;
-
-	/*
-	 * Voltage thresholds are <target min max>
-	 */
-	opp-384000000 {
-		opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>;
-		opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>;
-		opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
-		opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
-		opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>;
-		opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>;
-		opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>;
-	};
-
-	opp-600000000 {
-		opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
-		opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
-		opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>;
-		opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>;
-		opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>;
-		opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>;
-		opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>;
-	};
-
-	opp-800000000 {
-		opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
-		opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
-		opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>;
-		opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>;
-		opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>;
-		opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>;
-		opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>;
-	};
-
-	opp-1000000000 {
-		opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
-		opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
-		opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>;
-		opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>;
-		opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>;
-		opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>;
-		opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>;
-	};
-
-	opp-1400000000 {
-		opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>;
-		opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>;
-		opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
-		opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>;
-		opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>;
-		opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>;
-		opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>;
-		opp-level = <1>;
-	};
-
-	opp-1725000000 {
-		opp-hz = /bits/ 64 <1725000000>;
-		opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>;
-		opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>;
-		opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>;
-		opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>;
-		opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>;
-		opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>;
-		opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>;
-		opp-supported-hw = <0x1>;
-		clock-latency-ns = <100000>;
-		opp-level = <2>;
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi
deleted file mode 100644
index 141c71a8aa7f..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi
+++ /dev/null
@@ -1,239 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		linux,usable-memory = <0x41500000 0x1ea00000>;
-		reg = <0x40000000 0x20000000>;
-	};
-
-	cpus {
-		idle-states {
-			CPU_SPC: spc {
-				status = "disabled";
-			};
-		};
-	};
-
-	chosen {
-		bootargs-append = " console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art";
-	};
-};
-
-&qcom_pinmux {
-	mdio0_pins_active: mdio0_pins_active {
-		mux {
-			pins = "gpio0", "gpio1";
-			function = "mdio";
-			drive-strength = <2>;
-			bias-pull-down;
-			output-low;
-		};
-
-		clk {
-			pins = "gpio1";
-			input-disable;
-		};
-	};
-
-	phy_active: phy_active {
-		phy {
-			pins = "gpio6", "gpio7";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-			output-high;
-		};
-	};
-
-	uart1_pins: uart1_pins {
-		mux {
-			pins = "gpio51", "gpio52";
-			function = "gsbi1";
-			drive-strength = <4>;
-			bias-disable;
-		};
-	};
-};
-
-&gsbi1 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_UART_W_FC>;
-
-	serial@12450000 {
-		status = "okay";
-
-		pinctrl-0 = <&uart1_pins>;
-		pinctrl-names = "default";
-	};
-};
-
-&pcie0 {
-	status = "okay";
-
-	/delete-property/ pinctrl-0;
-	/delete-property/ pinctrl-names;
-	/delete-property/ perst-gpios;
-
-	bridge@0,0 {
-		reg = <0x0 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi0: wifi@1,0 {
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x10000 0 0 0 0>;
-		};
-	};
-};
-
-&pcie1 {
-	status = "okay";
-
-	/delete-property/ pinctrl-0;
-	/delete-property/ pinctrl-names;
-	/delete-property/ perst-gpios;
-
-	bridge@0,0 {
-		reg = <0x0 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi1: wifi@1,0 {
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x10000 0 0 0 0>;
-		};
-	};
-};
-
-&pcie2 {
-	status = "okay";
-
-	/delete-property/ pinctrl-0;
-	/delete-property/ pinctrl-names;
-	/delete-property/ perst-gpios;
-
-	bridge@0,0 {
-		reg = <0x0 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi2: wifi@1,0 {
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x10000 0 0 0 0>;
-		};
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		compatible = "qcom,nandcs";
-
-		reg = <0>;
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		nand-is-boot-medium;
-		qcom,boot_pages_size = <0x2140000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "sbl1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "mibib";
-				reg = <0x40000 0x140000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "sbl2";
-				reg = <0x180000 0x140000>;
-				read-only;
-			};
-
-			partition@2c0000 {
-				label = "sbl3";
-				reg = <0x2c0000 0x280000>;
-				read-only;
-			};
-
-			partition@540000 {
-				label = "ddrconfig";
-				reg = <0x540000 0x120000>;
-				read-only;
-			};
-
-			partition@660000 {
-				label = "ssd";
-				reg = <0x660000 0x120000>;
-				read-only;
-			};
-
-			partition@780000 {
-				label = "tz";
-				reg = <0x780000 0x280000>;
-				read-only;
-			};
-
-			partition@a00000 {
-				label = "rpm";
-				reg = <0xa00000 0x280000>;
-				read-only;
-			};
-
-			partition@1fc0000 {
-				label = "u-boot";
-				reg = <0x1fc0000 0x180000>;
-				read-only;
-			};
-
-			partition@21c0000 {
-				label = "bootkernel1";
-				reg = <0x21c0000 0xa80000>;
-			};
-
-			partition@2c40000 {
-				label = "bootkernel2";
-				reg = <0x2c40000 0xa80000>;
-			};
-
-			partition@36c0000 {
-				label = "ubi";
-				reg = <0x36c0000 0x46c0000>;
-			};
-
-			partition@7d80000 {
-				label = "art";
-				reg = <0x7d80000 0x200000>;
-				read-only;
-			};
-		};
-	};
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts
deleted file mode 100644
index 85b0dc3b8ccd..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts
+++ /dev/null
@@ -1,332 +0,0 @@
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Edgecore ECW5410";
-	compatible = "edgecore,ecw5410", "qcom,ipq8064";
-
-	reserved-memory {
-		nss@40000000 {
-			reg = <0x40000000 0x1000000>;
-			no-map;
-		};
-
-		smem: smem@41000000 {
-			reg = <0x41000000 0x200000>;
-			no-map;
-		};
-
-		wifi_dump@44000000 {
-			reg = <0x44000000 0x600000>;
-			no-map;
-		};
-	};
-
-	cpus {
-		idle-states {
-			CPU_SPC: spc {
-				status = "disabled";
-			};
-		};
-	};
-
-	aliases {
-		serial1 = &gsbi1_serial;
-		ethernet0 = &gmac2;
-		ethernet1 = &gmac3;
-
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
-	};
-
-	chosen {
-		bootargs-append = " console=ttyMSM0,115200n8 root=/dev/ubiblock0_1";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		led_power_green: power_green {
-			label = "green:power";
-			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g_green {
-			label = "green:wlan2g";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2g_yellow {
-			label = "yellow:wlan2g";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan5g_green {
-			label = "green:wlan5g";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
-		};
-
-		led_power_red: power_red {
-			label = "red:power";
-			gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan5g_yellow {
-			label = "yellow:wlan5g";
-			gpios = <&qcom_pinmux 59 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-
-&qcom_pinmux {
-	spi_pins: spi_pins {
-		mux {
-			pins = "gpio18", "gpio19";
-			function = "gsbi5";
-			drive-strength = <10>;
-			bias-pull-down;
-		};
-
-		clk {
-			pins = "gpio21";
-			function = "gsbi5";
-			drive-strength = <12>;
-			bias-pull-down;
-		};
-
-		cs {
-			pins = "gpio20";
-			function = "gpio";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio16", "gpio23", "gpio24", "gpio26",
-				   "gpio28", "gpio59";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	button_pins: button_pins {
-		mux {
-			pins = "gpio25";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	uart1_pins: uart1_pins {
-		mux {
-			pins = "gpio51", "gpio52", "gpio53", "gpio54";
-			function = "gsbi1";
-			drive-strength = <12>;
-			bias-none;
-		};
-	};
-};
-
-&gsbi1 {
-	qcom,mode = <GSBI_PROT_UART_W_FC>;
-	status = "okay";
-
-	serial@12450000 {
-		status = "okay";
-
-		pinctrl-0 = <&uart1_pins>;
-		pinctrl-names = "default";
-	};
-};
-
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_SPI>;
-	status = "okay";
-
-	spi4: spi@1a280000 {
-		status = "okay";
-		spi-max-frequency = <50000000>;
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-		m25p80@0 {
-			compatible = "jedec,spi-nor";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-
-			partitions {
-				compatible = "qcom,smem-part";
-			};
-		};
-	};
-};
-
-&hs_phy_0 {		/* USB3 port 0 HS phy */
-	status = "okay";
-};
-
-&hs_phy_1 {		/* USB3 port 1 HS phy */
-	status = "okay";
-};
-
-&ss_phy_0 {		/* USB3 port 0 SS phy */
-	status = "okay";
-};
-
-&ss_phy_1 {		/* USB3 port 1 SS phy */
-	status = "okay";
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-
-	/delete-property/ pinctrl-0;
-	/delete-property/ pinctrl-names;
-	/delete-property/ perst-gpios;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x00010000 0 0 0 0>;
-			qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
-		};
-	};
-};
-
-&pcie2 {
-	status = "okay";
-
-	/delete-property/ pinctrl-0;
-	/delete-property/ pinctrl-names;
-	/delete-property/ perst-gpios;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x00010000 0 0 0 0>;
-			qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		compatible = "qcom,nandcs";
-
-		reg = <0>;
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			rootfs1@0 {
-				label = "rootfs1";
-				reg = <0x0000000 0x4000000>;
-			};
-
-			rootfs2@4000000 {
-				label = "rootfs2";
-				reg = <0x4000000 0x4000000>;
-			};
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-
-	qcom,id = <2>;
-	mdiobus = <&mdio0>;
-
-	phy-mode = "sgmii";
-	phy-handle = <&phy1>;
-};
-
-&gmac3 {
-	status = "okay";
-
-	qcom,id = <3>;
-	mdiobus = <&mdio0>;
-
-	phy-mode = "sgmii";
-	phy-handle = <&phy0>;
-};
-
-&adm_dma {
-	status = "okay";
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-mr42.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-mr42.dts
deleted file mode 100644
index ccf2554ca319..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-mr42.dts
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq8068-cryptid-common.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Meraki MR42";
-	compatible = "meraki,mr42", "qcom,ipq8064";
-
-	aliases {
-		serial1 = &gsbi1_serial;
-		ethernet0 = &gmac3;
-
-		led-boot = &led_active;
-		led-failsafe = &led_power;
-		led-running = &led_active;
-		led-upgrade = &led_active;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		led_power: power {
-			label = "orange:power";
-			gpios = <&qcom_pinmux 31 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_active: active {
-			label = "white:active";
-			gpios = <&qcom_pinmux 32 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&gmac3 {
-	status = "okay";
-
-	qcom,id = <3>;
-	mdiobus = <&mdio0>;
-
-	phy-mode = "sgmii";
-	phy-handle = <&phy2>;
-
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-};
-
-&gsbi2 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_I2C>;
-};
-
-&gsbi2_i2c {
-	status = "okay";
-
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	ina2xx@40 {
-		compatible = "ina219";
-		shunt-resistor = <40000>;
-		reg = <0x40>;
-	};
-
-	eeprom@56 {
-		compatible = "atmel,24c64";
-		pagesize = <32>;
-		reg = <0x56>;
-		read-only;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		mac_address: mac-address@66 {
-			reg = <0x66 0x6>;
-		};
-	};
-};
-
-&gsbi6 {
-	qcom,mode = <GSBI_PROT_I2C>;
-	status = "okay";
-};
-
-&gsbi6_i2c {
-	status = "okay";
-
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-
-	tlc591xx@40 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "ti,tlc59108";
-		reg = <0x40>;
-
-		red@0 {
-			label = "red:user";
-			reg = <0x0>;
-		};
-
-		green@1 {
-			label = "green:user";
-			reg = <0x1>;
-		};
-
-		blue@2 {
-			label = "blue:user";
-			reg = <0x2>;
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
-	pinctrl-names = "default";
-
-	phy2: ethernet-phy2 {
-		reg = <2>;
-
-		reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <24000>;
-
-		eee-broken-100tx;
-		eee-broken-1000t;
-	};
-};
-
-&qcom_pinmux {
-	i2c0_pins: i2c0_pins {
-		mux {
-			pins = "gpio24", "gpio25";
-			function = "gsbi2";
-			drive-strength = <2>;
-			bias-pull-up;
-			input;
-		};
-	};
-
-	button_pins: button_pins {
-		mux {
-			pins = "gpio26";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	i2c1_pins: i2c1_pins {
-		mux {
-			pins = "gpio29", "gpio30";
-			function = "gsbi6";
-			drive-strength = <2>;
-			bias-pull-up;
-			input;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio31", "gpio32";
-			function = "gpio";
-			drive-strength = <12>;
-			bias-pull-down;
-			output-low;
-		};
-	};
-};
-
-&wifi0 {
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <1>;
-};
-
-&wifi1 {
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <2>;
-};
-
-&wifi2 {
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <3>;
-};
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-mr52.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-mr52.dts
deleted file mode 100644
index e1c233254d25..000000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-mr52.dts
+++ /dev/null
@@ -1,230 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq8068-cryptid-common.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Meraki MR52";
-	compatible = "meraki,mr52", "qcom,ipq8064";
-
-	aliases {
-		serial1 = &gsbi1_serial;
-		mdio-gpio0 = &mdio_gpio0;
-		ethernet0 = &gmac2;
-		ethernet1 = &gmac3;
-
-		led-boot = &led_active;
-		led-failsafe = &led_power;
-		led-running = &led_active;
-		led-upgrade = &led_active;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		led_power: power {
-			label = "orange:power";
-			gpios = <&qcom_pinmux 19 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan2_green {
-			label = "green:lan2";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan1_green {
-			label = "green:lan1";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_active: active {
-			label = "white:active";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
-		};
-
-		lan2_orange {
-			label = "orange:lan2";
-			gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan1_orange {
-			label = "orange:lan1";
-			gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&gmac2 {
-	status = "okay";
-
-	qcom,id = <2>;
-	mdiobus = <&mdio0>;
-
-	phy-mode = "sgmii";
-	phy-handle = <&phy0>;
-
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-};
-
-&gmac3 {
-	status = "okay";
-
-	qcom,id = <3>;
-	mdiobus = <&mdio_gpio0>;
-
-	phy-mode = "sgmii";
-	phy-handle = <&phy4>;
-
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <1>;
-};
-
-&gsbi7 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_I2C>;
-};
-
-&gsbi7_i2c {
-	status = "okay";
-
-	pinctrl-0 = <&i2c_pins>;
-	pinctrl-names = "default";
-
-	ina2xx@45 {
-		compatible = "ina219";
-		shunt-resistor = <80000>;
-		reg = <0x45>;
-	};
-
-	tlc591xx@49 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "ti,tlc59108";
-		reg = <0x49>;
-
-		red@0 {
-			label = "red:user";
-			reg = <0x0>;
-		};
-
-		green@1 {
-			label = "green:user";
-			reg = <0x1>;
-		};
-
-		blue@2 {
-			label = "blue:user";
-			reg = <0x2>;
-		};
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c64";
-		pagesize = <32>;
-		reg = <0x52>;
-		read-only;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		mac_address: mac-address@66 {
-			reg = <0x66 0x6>;
-		};
-	};
-};
-
-&qcom_pinmux {
-	i2c_pins: i2c_pins {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "gsbi7";
-			drive-strength = <2>;
-			bias-pull-up;
-			input;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio19", "gpio26";
-			function = "gpio";
-			drive-strength = <12>;
-			bias-pull-down;
-			output-low;
-		};
-	};
-
-	button_pins: button_pins {
-		mux {
-			pins = "gpio25";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-			input;
-		};
-	};
-};
-
-&soc {
-	mdio_gpio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		status = "okay";
-
-		pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
-		pinctrl-names = "default";
-
-		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH
-			 &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-
-		phy0: ethernet-phy0 {
-			reg = <0>;
-			reset-gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <24000>;
-		};
-
-		phy4: ethernet-phy4 {
-			reg = <4>;
-			reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <24000>;
-		};
-	};
-};
-
-&wifi0 {
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <4>;
-};
-
-&wifi1 {
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <3>;
-};
-
-&wifi2 {
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <2>;
-};
diff --git a/target/linux/ipq806x/patches-5.10/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch b/target/linux/ipq806x/patches-5.10/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
deleted file mode 100644
index 83d7bbc6f406..000000000000
--- a/target/linux/ipq806x/patches-5.10/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 28d0ed88f536dd639adf1b0c7c08e04be3c8f294 Mon Sep 17 00:00:00 2001
-From: Thomas Pedersen <twp@codeaurora.org>
-Date: Mon, 16 May 2016 17:58:50 -0700
-Subject: [PATCH 01/69] dtbindings: qcom_adm: Fix channel specifiers
-
-Original patch from Andy Gross.
-
-This patch removes the crci information from the dma
-channel property.  At least one client device requires
-using more than one CRCI value for a channel.  This does
-not match the current binding and the crci information
-needs to be removed.
-
-Instead, the client device will provide this information
-via other means.
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
-Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
----
- Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
- 1 file changed, 6 insertions(+), 10 deletions(-)
-
---- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
-+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
-@@ -4,8 +4,7 @@ Required properties:
- - compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
- - reg: Address range for DMA registers
- - interrupts: Should contain one interrupt shared by all channels
--- #dma-cells: must be <2>.  First cell denotes the channel number.  Second cell
--  denotes CRCI (client rate control interface) flow control assignment.
-+- #dma-cells: must be <1>.  First cell denotes the channel number.
- - clocks: Should contain the core clock and interface clock.
- - clock-names: Must contain "core" for the core clock and "iface" for the
-   interface clock.
-@@ -22,7 +21,7 @@ Example:
- 			compatible = "qcom,adm";
- 			reg = <0x18300000 0x100000>;
- 			interrupts = <0 170 0>;
--			#dma-cells = <2>;
-+			#dma-cells = <1>;
- 
- 			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
- 			clock-names = "core", "iface";
-@@ -35,15 +34,12 @@ Example:
- 			qcom,ee = <0>;
- 		};
- 
--DMA clients must use the format descripted in the dma.txt file, using a three
-+DMA clients must use the format descripted in the dma.txt file, using a two
- cell specifier for each channel.
- 
--Each dmas request consists of 3 cells:
-+Each dmas request consists of two cells:
-  1. phandle pointing to the DMA controller
-  2. channel number
-- 3. CRCI assignment, if applicable.  If no CRCI flow control is required, use 0.
--    The CRCI is used for flow control.  It identifies the peripheral device that
--    is the source/destination for the transferred data.
- 
- Example:
- 
-@@ -55,7 +51,7 @@ Example:
- 
- 		cs-gpios = <&qcom_pinmux 20 0>;
- 
--		dmas = <&adm_dma 6 9>,
--			<&adm_dma 5 10>;
-+		dmas = <&adm_dma 6>,
-+			<&adm_dma 5>;
- 		dma-names = "rx", "tx";
- 	};
diff --git a/target/linux/ipq806x/patches-5.10/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch b/target/linux/ipq806x/patches-5.10/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
deleted file mode 100644
index a12aa721e2d3..000000000000
--- a/target/linux/ipq806x/patches-5.10/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 48051ece78136e4235a2415a52797db56f8a4478 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Tue, 21 Apr 2015 19:09:07 -0700
-Subject: [PATCH 33/69] ARM: qcom: automatically select PCI_DOMAINS if PCI is
- enabled
-
-If multiple PCIe devices are present in the system, the kernel will
-panic at boot time when trying to scan the PCI buses. This happens on
-IPQ806x based platforms, which has 3 PCIe ports.
-
-Enabling this option allows the kernel to assign the pci-domains
-according to the device-tree content. This allows multiple PCIe
-controllers to coexist in the system.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/mach-qcom/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/mach-qcom/Kconfig
-+++ b/arch/arm/mach-qcom/Kconfig
-@@ -7,6 +7,7 @@ menuconfig ARCH_QCOM
- 	select ARM_AMBA
- 	select PINCTRL
- 	select QCOM_SCM if SMP
-+	select PCI_DOMAINS if PCI
- 	help
- 	  Support for Qualcomm's devicetree based systems.
- 
diff --git a/target/linux/ipq806x/patches-5.10/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch b/target/linux/ipq806x/patches-5.10/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch
deleted file mode 100644
index b73218e71bb0..000000000000
--- a/target/linux/ipq806x/patches-5.10/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From fa71139b55e114aa8c3c4823ff8ee7d49ee810d4 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Wed, 29 Apr 2015 15:21:46 -0700
-Subject: [PATCH 60/69] HACK: arch: arm: force ZRELADDR on arch-qcom
-
-ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended
-on most ARM architectures. This automatically calculate ZRELADDR by
-masking PHYS_OFFSET with 0xf8000000.
-
-However, on IPQ806x, the first ~20MB of RAM is reserved for the hardware
-network accelerators, and the bootloader removes this section from the
-layout passed from the ATAGS (when used).
-
-For newer bootloader, when DT is used, this is not a problem, we just
-reserve this memory in the device tree. But if the bootloader doesn't
-have DT support, then ATAGS have to be used. In this case, the ARM
-decompressor will position the kernel in this low mem, which will not be
-in the RAM section mapped by the bootloader, which means the kernel will
-freeze in the middle of the boot process trying to map the memory.
-
-As a work around, this patch allows disabling AUTO_ZRELADDR when
-ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders
-which don't support device-tree, which is the case on certain early
-IPQ806x based designs.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/Kconfig                 | 2 +-
- arch/arm/Makefile                | 2 ++
- arch/arm/mach-qcom/Makefile.boot | 1 +
- 3 files changed, 4 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/mach-qcom/Makefile.boot
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -322,7 +322,7 @@ config ARCH_MULTIPLATFORM
- 	select ARCH_SELECT_MEMORY_MODEL
- 	select ARM_HAS_SG_CHAIN
- 	select ARM_PATCH_PHYS_VIRT
--	select AUTO_ZRELADDR
-+	select AUTO_ZRELADDR if !ARCH_QCOM
- 	select TIMER_OF
- 	select COMMON_CLK
- 	select GENERIC_CLOCKEVENTS
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -251,9 +251,11 @@ MACHINE  := arch/arm/mach-$(word 1,$(mac
- else
- MACHINE  :=
- endif
-+ifeq ($(CONFIG_ARCH_QCOM),)
- ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
- MACHINE  :=
- endif
-+endif
- 
- machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
- platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
---- /dev/null
-+++ b/arch/arm/mach-qcom/Makefile.boot
-@@ -0,0 +1 @@
-+zreladdr-y+= 0x42208000
diff --git a/target/linux/ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch b/target/linux/ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch
deleted file mode 100644
index a1a0371fbc48..000000000000
--- a/target/linux/ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 4d8e29642661397a339ac3485f212c6360445421 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 9 Mar 2017 09:33:32 +0100
-Subject: [PATCH 65/69] arm: override compiler flags
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/arm/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -61,7 +61,7 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-i
- # macro, but instead defines a whole series of macros which makes
- # testing for a specific architecture or later rather impossible.
- arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m
--arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 -march=armv7-a
-+arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15
- arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 -march=armv6
- # Only override the compiler option if ARMv6. The ARMv6K extensions are
- # always available in ARMv7
diff --git a/target/linux/ipq806x/patches-5.10/0067-generic-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/ipq806x/patches-5.10/0067-generic-Mangle-bootloader-s-kernel-arguments.patch
deleted file mode 100644
index e9f2d059371c..000000000000
--- a/target/linux/ipq806x/patches-5.10/0067-generic-Mangle-bootloader-s-kernel-arguments.patch
+++ /dev/null
@@ -1,210 +0,0 @@
-From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
-From: Adrian Panella <ianchi74@outlook.com>
-Date: Thu, 9 Mar 2017 09:37:17 +0100
-Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
-
-The command-line arguments provided by the boot loader will be
-appended to a new device tree property: bootloader-args.
-If there is a property "append-rootblock" in DT under /chosen
-and a root= option in bootloaders command line it will be parsed
-and added to DT bootargs with the form: <append-rootblock>XX.
-Only command line ATAG will be processed, the rest of the ATAGs
-sent by bootloader will be ignored.
-This is usefull in dual boot systems, to get the current root partition
-without afecting the rest of the system.
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
----
- arch/arm/Kconfig                        | 11 +++++
- arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++-
- init/main.c                             | 16 ++++++++
- 3 files changed, 98 insertions(+), 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1777,6 +1777,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- 	  The command-line arguments provided by the boot loader will be
- 	  appended to the the device tree bootargs property.
- 
-+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+	bool "Append rootblock parsing bootloader's kernel arguments"
-+	help
-+	  The command-line arguments provided by the boot loader will be
-+	  appended to a new device tree property: bootloader-args.
-+	  If there is a property "append-rootblock" in DT under /chosen
-+	  and a root= option in bootloaders command line it will be parsed
-+	  and added to DT bootargs with the form: <append-rootblock>XX.
-+	  Only command line ATAG will be processed, the rest of the ATAGs
-+	  sent by bootloader will be ignored.
-+
- endchoice
- 
- config CMDLINE
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -5,6 +5,8 @@
- 
- #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
- #define do_extend_cmdline 1
-+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#define do_extend_cmdline 1
- #else
- #define do_extend_cmdline 0
- #endif
-@@ -69,6 +71,80 @@ static uint32_t get_cell_size(const void
- 	return cell_size;
- }
- 
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+/**
-+ * taken from arch/x86/boot/string.c
-+ * local_strstr - Find the first substring in a %NUL terminated string
-+ * @s1: The string to be searched
-+ * @s2: The string to search for
-+ */
-+static char *local_strstr(const char *s1, const char *s2)
-+{
-+	size_t l1, l2;
-+
-+	l2 = strlen(s2);
-+	if (!l2)
-+		return (char *)s1;
-+	l1 = strlen(s1);
-+	while (l1 >= l2) {
-+		l1--;
-+		if (!memcmp(s1, s2, l2))
-+			return (char *)s1;
-+		s1++;
-+	}
-+	return NULL;
-+}
-+
-+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
-+{
-+	char *ptr, *end, *tmp;
-+	char *root="root=";
-+	char *find_rootblock;
-+	int i, l;
-+	const char *rootblock;
-+
-+	find_rootblock = getprop(fdt, "/chosen", "find-rootblock", &l);
-+	if(!find_rootblock)
-+		find_rootblock = root;
-+
-+	//ARM doesn't have __HAVE_ARCH_STRSTR, so it was copied from x86
-+	ptr = local_strstr(str, find_rootblock);
-+
-+	if(!ptr)
-+		return dest;
-+
-+	end = strchr(ptr, ' ');
-+	end = end ? (end - 1) : (strchr(ptr, 0) - 1);
-+
-+	// Some boards ubi.mtd=XX,ZZZZ, so let's check for '," too.
-+	tmp = strchr(ptr, ',');
-+
-+	if(tmp)
-+		end = end < tmp ? end : tmp - 1;
-+
-+	//find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX | ubi.mtd=XX,ZZZZ )
-+	for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
-+	ptr = end + 1;
-+
-+	/* if append-rootblock property is set use it to append to command line */
-+	rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
-+	if(rootblock != NULL) {
-+		if(*dest != ' ') {
-+			*dest = ' ';
-+			dest++;
-+			len++;
-+		}
-+		if (len + l + i <= COMMAND_LINE_SIZE) {
-+			memcpy(dest, rootblock, l);
-+			dest += l - 1;
-+			memcpy(dest, ptr, i);
-+			dest += i;
-+		}
-+	}
-+	return dest;
-+}
-+#endif
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- 	char cmdline[COMMAND_LINE_SIZE];
-@@ -88,12 +164,21 @@ static void merge_fdt_bootargs(void *fdt
- 
- 	/* and append the ATAG_CMDLINE */
- 	if (fdt_cmdline) {
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+		//save original bootloader args
-+		//and append ubi.mtd with root partition number to current cmdline
-+		setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
-+		ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
-+
-+#else
- 		len = strlen(fdt_cmdline);
- 		if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- 			*ptr++ = ' ';
- 			memcpy(ptr, fdt_cmdline, len);
- 			ptr += len;
- 		}
-+#endif
- 	}
- 	*ptr = '\0';
- 
-@@ -168,7 +253,9 @@ int atags_to_fdt(void *atag_list, void *
- 			else
- 				setprop_string(fdt, "/chosen", "bootargs",
- 					       atag->u.cmdline.cmdline);
--		} else if (atag->hdr.tag == ATAG_MEM) {
-+		}
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+		else if (atag->hdr.tag == ATAG_MEM) {
- 			if (memcount >= sizeof(mem_reg_property)/4)
- 				continue;
- 			if (!atag->u.mem.size)
-@@ -212,6 +299,10 @@ int atags_to_fdt(void *atag_list, void *
- 		setprop(fdt, "/memory", "reg", mem_reg_property,
- 			4 * memcount * memsize);
- 	}
-+#else
-+
-+	}
-+#endif
- 
- 	return fdt_pack(fdt);
- }
---- a/init/main.c
-+++ b/init/main.c
-@@ -110,6 +110,10 @@
- 
- #include <kunit/test.h>
- 
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#include <linux/of.h>
-+#endif
-+
- static int kernel_init(void *);
- 
- extern void init_IRQ(void);
-@@ -906,6 +910,18 @@ asmlinkage __visible void __init __no_sa
- 	pr_notice("Kernel command line: %s\n", saved_command_line);
- 	/* parameters may set static keys */
- 	jump_label_init();
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+	//Show bootloader's original command line for reference
-+	if(of_chosen) {
-+		const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
-+		if(prop)
-+			pr_notice("Bootloader command line (ignored): %s\n", prop);
-+		else
-+			pr_notice("Bootloader command line not present\n");
-+	}
-+#endif
-+
- 	parse_early_param();
- 	after_dashes = parse_args("Booting kernel",
- 				  static_command_line, __start___param,
diff --git a/target/linux/ipq806x/patches-5.10/0072-add-ipq806x-with-no-clocks.patch b/target/linux/ipq806x/patches-5.10/0072-add-ipq806x-with-no-clocks.patch
deleted file mode 100644
index b3c8a514e54b..000000000000
--- a/target/linux/ipq806x/patches-5.10/0072-add-ipq806x-with-no-clocks.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/firmware/qcom_scm.c
-+++ b/drivers/firmware/qcom_scm.c
-@@ -1269,6 +1269,7 @@ static const struct of_device_id qcom_sc
- 							     SCM_HAS_BUS_CLK)
- 	},
- 	{ .compatible = "qcom,scm-ipq4019" },
-+	{ .compatible = "qcom,scm-ipq806x" },
- 	{ .compatible = "qcom,scm-msm8660", .data = (void *) SCM_HAS_CORE_CLK },
- 	{ .compatible = "qcom,scm-msm8960", .data = (void *) SCM_HAS_CORE_CLK },
- 	{ .compatible = "qcom,scm-msm8916", .data = (void *)(SCM_HAS_CORE_CLK |
diff --git a/target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch b/target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch
deleted file mode 100644
index 1046af15d41d..000000000000
--- a/target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch
+++ /dev/null
@@ -1,212 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -20,7 +20,7 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
--		cpu@0 {
-+		cpu0: cpu@0 {
- 			compatible = "qcom,krait";
- 			enable-method = "qcom,kpss-acc-v1";
- 			device_type = "cpu";
-@@ -30,7 +30,7 @@
- 			qcom,saw = <&saw0>;
- 		};
- 
--		cpu@1 {
-+		cpu1: cpu@1 {
- 			compatible = "qcom,krait";
- 			enable-method = "qcom,kpss-acc-v1";
- 			device_type = "cpu";
-@@ -67,7 +67,7 @@
- 			no-map;
- 		};
- 
--		smem@41000000 {
-+		smem: smem@41000000 {
- 			reg = <0x41000000 0x200000>;
- 			no-map;
- 		};
-@@ -128,6 +128,7 @@
- 			gpio-ranges = <&qcom_pinmux 0 0 69>;
- 			#gpio-cells = <2>;
- 			interrupt-controller;
-+			#address-cells = <0>;
- 			#interrupt-cells = <2>;
- 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- 
-@@ -190,6 +191,7 @@
- 		intc: interrupt-controller@2000000 {
- 			compatible = "qcom,msm-qgic2";
- 			interrupt-controller;
-+			#address-cells = <0>;
- 			#interrupt-cells = <3>;
- 			reg = <0x02000000 0x1000>,
- 			      <0x02002000 0x1000>;
-@@ -219,21 +221,23 @@
- 		acc0: clock-controller@2088000 {
- 			compatible = "qcom,kpss-acc-v1";
- 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-+			clock-output-names = "acpu0_aux";
- 		};
- 
- 		acc1: clock-controller@2098000 {
- 			compatible = "qcom,kpss-acc-v1";
- 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-+			clock-output-names = "acpu1_aux";
- 		};
- 
- 		saw0: regulator@2089000 {
--			compatible = "qcom,saw2";
-+			compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
- 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
- 			regulator;
- 		};
- 
- 		saw1: regulator@2099000 {
--			compatible = "qcom,saw2";
-+			compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
- 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
- 			regulator;
- 		};
-@@ -251,7 +255,7 @@
- 
- 			syscon-tcsr = <&tcsr>;
- 
--			serial@12490000 {
-+			gsbi2_serial: serial@12490000 {
- 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- 				reg = <0x12490000 0x1000>,
- 				      <0x12480000 0x1000>;
-@@ -261,7 +265,7 @@
- 				status = "disabled";
- 			};
- 
--			i2c@124a0000 {
-+			gsbi2_i2c: i2c@124a0000 {
- 				compatible = "qcom,i2c-qup-v1.1.1";
- 				reg = <0x124a0000 0x1000>;
- 				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
-@@ -326,7 +330,7 @@
- 
- 			syscon-tcsr = <&tcsr>;
- 
--			serial@1a240000 {
-+			gsbi5_serial: serial@1a240000 {
- 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- 				reg = <0x1a240000 0x1000>,
- 				      <0x1a200000 0x1000>;
-@@ -397,7 +401,7 @@
- 			status = "disabled";
- 		};
- 
--		sata@29000000 {
-+		sata: sata@29000000 {
- 			compatible = "qcom,ipq806x-ahci", "generic-ahci";
- 			reg = <0x29000000 0x180>;
- 
-@@ -430,13 +434,35 @@
- 			reg = <0x00700000 0x1000>;
- 			#address-cells = <1>;
- 			#size-cells = <1>;
-+
-+			tsens_calib: calib@400 {
-+				reg = <0x400 0xb>;
-+			};
-+			tsens_backup: backup@410 {
-+				reg = <0x410 0xb>;
-+			};
-+			speedbin_efuse: speedbin@0c0 {
-+				reg = <0x0c0 0x4>;
-+			};
- 		};
- 
- 		gcc: clock-controller@900000 {
--			compatible = "qcom,gcc-ipq8064";
-+			compatible = "qcom,gcc-ipq8064", "syscon";
- 			reg = <0x00900000 0x4000>;
- 			#clock-cells = <1>;
- 			#reset-cells = <1>;
-+			#power-domain-cells = <1>;
-+
-+			tsens: thermal-sensor@900000 {
-+				compatible = "qcom,ipq8064-tsens";
-+
-+				nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-+				nvmem-cell-names = "calib", "calib_backup";
-+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-+				interrupt-names = "uplow";
-+				#thermal-sensor-cells = <1>;
-+				#qcom,sensors = <11>;
-+			};
- 		};
- 
- 		tcsr: syscon@1a400000 {
-@@ -622,7 +648,7 @@
- 
- 		gmac0: ethernet@37000000 {
- 			device_type = "network";
--			compatible = "qcom,ipq806x-gmac";
-+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
- 			reg = <0x37000000 0x200000>;
- 			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
- 			interrupt-names = "macirq";
-@@ -645,7 +671,7 @@
- 
- 		gmac1: ethernet@37200000 {
- 			device_type = "network";
--			compatible = "qcom,ipq806x-gmac";
-+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
- 			reg = <0x37200000 0x200000>;
- 			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- 			interrupt-names = "macirq";
-@@ -668,7 +694,7 @@
- 
- 		gmac2: ethernet@37400000 {
- 			device_type = "network";
--			compatible = "qcom,ipq806x-gmac";
-+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
- 			reg = <0x37400000 0x200000>;
- 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
- 			interrupt-names = "macirq";
-@@ -691,7 +717,7 @@
- 
- 		gmac3: ethernet@37600000 {
- 			device_type = "network";
--			compatible = "qcom,ipq806x-gmac";
-+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
- 			reg = <0x37600000 0x200000>;
- 			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
- 			interrupt-names = "macirq";
-@@ -740,13 +766,13 @@
- 			qcom,ee = <0>;
- 		};
- 
--		amba {
--			compatible = "simple-bus";
-+		amba: amba {
-+			compatible = "arm,amba-bus";
- 			#address-cells = <1>;
- 			#size-cells = <1>;
- 			ranges;
- 
--			sdcc@12400000 {
-+			sdcc1: sdcc@12400000 {
- 				status          = "disabled";
- 				compatible      = "arm,pl18x", "arm,primecell";
- 				arm,primecell-periphid = <0x00051180>;
-@@ -760,13 +786,12 @@
- 				non-removable;
- 				cap-sd-highspeed;
- 				cap-mmc-highspeed;
--				mmc-ddr-1_8v;
- 				vmmc-supply = <&vsdcc_fixed>;
- 				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
- 				dma-names = "tx", "rx";
- 			};
- 
--			sdcc@12180000 {
-+			sdcc3: sdcc@12180000 {
- 				compatible      = "arm,pl18x", "arm,primecell";
- 				arm,primecell-periphid = <0x00051180>;
- 				status          = "disabled";
diff --git a/target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch b/target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch
deleted file mode 100644
index 82d91e12421a..000000000000
--- a/target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch
+++ /dev/null
@@ -1,846 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -8,6 +8,8 @@
- #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
- #include <dt-bindings/soc/qcom,gsbi.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/mfd/qcom-rpm.h>
-+#include <dt-bindings/clock/qcom,rpmcc.h>
- 
- / {
- 	#address-cells = <1>;
-@@ -28,6 +30,16 @@
- 			next-level-cache = <&L2>;
- 			qcom,acc = <&acc0>;
- 			qcom,saw = <&saw0>;
-+			clocks = <&kraitcc 0>, <&kraitcc 4>;
-+			clock-names = "cpu", "l2";
-+			clock-latency = <100000>;
-+			cpu-supply = <&smb208_s2a>;
-+			operating-points-v2 = <&opp_table0>;
-+			voltage-tolerance = <5>;
-+			cooling-min-state = <0>;
-+			cooling-max-state = <10>;
-+			#cooling-cells = <2>;
-+			cpu-idle-states = <&CPU_SPC>;
- 		};
- 
- 		cpu1: cpu@1 {
-@@ -38,14 +50,350 @@
- 			next-level-cache = <&L2>;
- 			qcom,acc = <&acc1>;
- 			qcom,saw = <&saw1>;
-+			clocks = <&kraitcc 1>, <&kraitcc 4>;
-+			clock-names = "cpu", "l2";
-+			clock-latency = <100000>;
-+			cpu-supply = <&smb208_s2b>;
-+			operating-points-v2 = <&opp_table0>;
-+			voltage-tolerance = <5>;
-+			cooling-min-state = <0>;
-+			cooling-max-state = <10>;
-+			#cooling-cells = <2>;
-+			cpu-idle-states = <&CPU_SPC>;
-+ 		};
-+
-+		idle-states {
-+			CPU_SPC: spc {
-+				compatible = "qcom,idle-state-spc";
-+				status = "disabled";
-+				entry-latency-us = <400>;
-+				exit-latency-us = <900>;
-+				min-residency-us = <3000>;
-+			};
- 		};
-+	};
- 
--		L2: l2-cache {
--			compatible = "cache";
--			cache-level = <2>;
-+	opp_table_l2: opp_table_l2 {
-+		compatible = "operating-points-v2";
-+
-+		opp-384000000 {
-+			opp-hz = /bits/ 64 <384000000>;
-+			opp-microvolt = <1100000>;
-+			clock-latency-ns = <100000>;
-+			opp-level = <0>;
-+		};
-+
-+		opp-1000000000 {
-+			opp-hz = /bits/ 64 <1000000000>;
-+			opp-microvolt = <1100000>;
-+			clock-latency-ns = <100000>;
-+			opp-level = <1>;
-+		};
-+
-+		opp-1200000000 {
-+			opp-hz = /bits/ 64 <1200000000>;
-+			opp-microvolt = <1150000>;
-+			clock-latency-ns = <100000>;
-+			opp-level = <2>;
-+		};
-+	};
-+
-+	opp_table0: opp_table0 {
-+		compatible = "operating-points-v2-kryo-cpu";
-+		nvmem-cells = <&speedbin_efuse>;
-+
-+		/*
-+		 * Voltage thresholds are <target min max>
-+		 */
-+		opp-384000000 {
-+			opp-hz = /bits/ 64 <384000000>;
-+			opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
-+			opp-microvolt-speed0-pvs1-v0 = <925000 878750 971250>;
-+			opp-microvolt-speed0-pvs2-v0 = <875000 831250 918750>;
-+			opp-microvolt-speed0-pvs3-v0 = <800000 760000 840000>;
-+			opp-supported-hw = <0x1>;
-+			clock-latency-ns = <100000>;
-+			opp-level = <0>;
-+		};
-+
-+		opp-600000000 {
-+			opp-hz = /bits/ 64 <600000000>;
-+			opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
-+			opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
-+			opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
-+			opp-microvolt-speed0-pvs3-v0 = <850000 807500 892500>;
-+			opp-supported-hw = <0x1>;
-+			clock-latency-ns = <100000>;
-+			opp-level = <1>;
-+		};
-+
-+		opp-800000000 {
-+			opp-hz = /bits/ 64 <800000000>;
-+			opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
-+			opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
-+			opp-microvolt-speed0-pvs2-v0 = <995000 945250 1044750>;
-+			opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
-+			opp-supported-hw = <0x1>;
-+			clock-latency-ns = <100000>;
-+			opp-level = <1>;
-+		};
-+
-+		opp-1000000000 {
-+			opp-hz = /bits/ 64 <1000000000>;
-+			opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
-+			opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
-+			opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
-+			opp-microvolt-speed0-pvs3-v0 = <950000 902500 997500>;
-+			opp-supported-hw = <0x1>;
-+			clock-latency-ns = <100000>;
-+			opp-level = <1>;
-+		};
-+
-+		opp-1200000000 {
-+			opp-hz = /bits/ 64 <1200000000>;
-+			opp-microvolt-speed0-pvs0-v0 = <1200000 1140000 1260000>;
-+			opp-microvolt-speed0-pvs1-v0 = <1125000 1068750 1181250>;
-+			opp-microvolt-speed0-pvs2-v0 = <1075000 1021250 1128750>;
-+			opp-microvolt-speed0-pvs3-v0 = <1000000 950000 1050000>;
-+			opp-supported-hw = <0x1>;
-+			clock-latency-ns = <100000>;
-+			opp-level = <2>;
-+		};
-+
-+		opp-1400000000 {
-+			opp-hz = /bits/ 64 <1400000000>;
-+			opp-microvolt-speed0-pvs0-v0 = <1250000 1187500 1312500>;
-+			opp-microvolt-speed0-pvs1-v0 = <1175000 1116250 1233750>;
-+			opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
-+			opp-microvolt-speed0-pvs3-v0 = <1050000 997500 1102500>;
-+			opp-supported-hw = <0x1>;
-+			clock-latency-ns = <100000>;
-+			opp-level = <2>;
- 		};
- 	};
- 
-+	thermal-zones {
-+		tsens_tz_sensor0 {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&tsens 0>;
-+
-+			trips {
-+				cpu-critical {
-+					temperature = <105000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+
-+				cpu-hot {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "hot";
-+				};
-+			};
-+		};
-+
-+		tsens_tz_sensor1 {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&tsens 1>;
-+
-+			trips {
-+				cpu-critical {
-+					temperature = <105000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+
-+				cpu-hot {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "hot";
-+				};
-+			};
-+		};
-+
-+		tsens_tz_sensor2 {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&tsens 2>;
-+
-+			trips {
-+				cpu-critical {
-+					temperature = <105000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+
-+				cpu-hot {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "hot";
-+				};
-+			};
-+		};
-+
-+		tsens_tz_sensor3 {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&tsens 3>;
-+
-+			trips {
-+				cpu-critical {
-+					temperature = <105000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+
-+				cpu-hot {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "hot";
-+				};
-+			};
-+		};
-+
-+		tsens_tz_sensor4 {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&tsens 4>;
-+
-+			trips {
-+				cpu-critical {
-+					temperature = <105000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+
-+				cpu-hot {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "hot";
-+				};
-+			};
-+		};
-+
-+		tsens_tz_sensor5 {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&tsens 5>;
-+
-+			trips {
-+				cpu-critical {
-+					temperature = <105000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+
-+				cpu-hot {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "hot";
-+				};
-+			};
-+		};
-+
-+		tsens_tz_sensor6 {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&tsens 6>;
-+
-+			trips {
-+				cpu-critical {
-+					temperature = <105000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+
-+				cpu-hot {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "hot";
-+				};
-+			};
-+		};
-+
-+		tsens_tz_sensor7 {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&tsens 7>;
-+
-+			trips {
-+				cpu-critical {
-+					temperature = <105000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+
-+				cpu-hot {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "hot";
-+				};
-+			};
-+		};
-+
-+		tsens_tz_sensor8 {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&tsens 8>;
-+
-+			trips {
-+				cpu-critical {
-+					temperature = <105000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+
-+				cpu-hot {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "hot";
-+				};
-+			};
-+		};
-+
-+		tsens_tz_sensor9 {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&tsens 9>;
-+
-+			trips {
-+				cpu-critical {
-+					temperature = <105000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+
-+				cpu-hot {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "hot";
-+				};
-+			};
-+		};
-+
-+		tsens_tz_sensor10 {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&tsens 10>;
-+
-+			trips {
-+				cpu-critical {
-+					temperature = <105000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+
-+				cpu-hot {
-+					temperature = <95000>;
-+					hysteresis = <2000>;
-+					type = "hot";
-+				};
-+			};
-+ 		};
-+ 	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x0 0x0>;
-@@ -93,6 +441,15 @@
- 		};
- 	};
- 
-+	fab-scaling {
-+		compatible = "qcom,fab-scaling";
-+		clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>;
-+		clock-names = "apps-fab-clk", "ddr-fab-clk";
-+		fab_freq_high = <533000000>;
-+		fab_freq_nominal = <400000000>;
-+		cpu_freq_threshold = <1000000000>;
-+	};
-+
- 	firmware {
- 		scm {
- 			compatible = "qcom,scm-ipq806x", "qcom,scm";
-@@ -120,6 +477,78 @@
- 			reg-names = "lpass-lpaif";
- 		};
- 
-+		L2: l2-cache {
-+			compatible = "qcom,krait-cache", "cache";
-+			cache-level = <2>;
-+			qcom,saw = <&saw_l2>;
-+
-+			clocks = <&kraitcc 4>;
-+			clock-names = "l2";
-+			l2-supply = <&smb208_s1a>;
-+			operating-points-v2 = <&opp_table_l2>;
-+		};
-+
-+		rpm: rpm@108000 {
-+			compatible = "qcom,rpm-ipq8064";
-+			reg = <0x108000 0x1000>;
-+			qcom,ipc = <&l2cc 0x8 2>;
-+
-+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-+					 <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-+					 <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "ack", "err", "wakeup";
-+
-+			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
-+			clock-names = "ram";
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			rpmcc: clock-controller {
-+				compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
-+				#clock-cells = <1>;
-+			};
-+
-+			regulators {
-+				compatible = "qcom,rpm-smb208-regulators";
-+
-+				smb208_s1a: s1a {
-+					regulator-min-microvolt = <1050000>;
-+					regulator-max-microvolt = <1150000>;
-+
-+					qcom,switch-mode-frequency = <1200000>;
-+				};
-+
-+				smb208_s1b: s1b {
-+					regulator-min-microvolt = <1050000>;
-+					regulator-max-microvolt = <1150000>;
-+
-+					qcom,switch-mode-frequency = <1200000>;
-+				};
-+
-+				smb208_s2a: s2a {
-+					regulator-min-microvolt = < 800000>;
-+					regulator-max-microvolt = <1250000>;
-+
-+					qcom,switch-mode-frequency = <1200000>;
-+				};
-+
-+				smb208_s2b: s2b {
-+					regulator-min-microvolt = < 800000>;
-+					regulator-max-microvolt = <1250000>;
-+
-+					qcom,switch-mode-frequency = <1200000>;
-+				};
-+			};
-+		};
-+
-+		rng@1a500000 {
-+			compatible = "qcom,prng";
-+			reg = <0x1a500000 0x200>;
-+			clocks = <&gcc PRNG_CLK>;
-+			clock-names = "core";
-+		};
-+
- 		qcom_pinmux: pinmux@800000 {
- 			compatible = "qcom,ipq8064-pinctrl";
- 			reg = <0x800000 0x4000>;
-@@ -159,6 +588,15 @@
- 				};
- 			};
- 
-+			i2c4_pins: i2c4_pinmux {
-+				mux {
-+					pins = "gpio12", "gpio13";
-+					function = "gsbi4";
-+					drive-strength = <12>;
-+					bias-disable;
-+				};
-+			};
-+
- 			spi_pins: spi_pins {
- 				mux {
- 					pins = "gpio18", "gpio19", "gpio21";
-@@ -168,6 +606,53 @@
- 				};
- 			};
- 
-+			nand_pins: nand_pins {
-+				disable {
-+					pins = "gpio34", "gpio35", "gpio36",
-+					       "gpio37", "gpio38";
-+					function = "nand";
-+					drive-strength = <10>;
-+					bias-disable;
-+				};
-+
-+				pullups {
-+					pins = "gpio39";
-+					function = "nand";
-+					drive-strength = <10>;
-+					bias-pull-up;
-+				};
-+
-+				hold {
-+					pins = "gpio40", "gpio41", "gpio42",
-+					       "gpio43", "gpio44", "gpio45",
-+					       "gpio46", "gpio47";
-+					function = "nand";
-+					drive-strength = <10>;
-+					bias-bus-hold;
-+				};
-+			};
-+
-+			mdio0_pins: mdio0_pins {
-+				mux {
-+					pins = "gpio0", "gpio1";
-+					function = "mdio";
-+					drive-strength = <8>;
-+					bias-disable;
-+				};
-+			};
-+
-+			rgmii2_pins: rgmii2_pins {
-+				mux {
-+					pins = "gpio27", "gpio28", "gpio29",
-+					       "gpio30", "gpio31", "gpio32",
-+					       "gpio51", "gpio52", "gpio59",
-+					       "gpio60", "gpio61", "gpio62";
-+					function = "rgmii2";
-+					drive-strength = <8>;
-+					bias-disable;
-+				};
-+			};
-+
- 			leds_pins: leds_pins {
- 				mux {
- 					pins = "gpio7", "gpio8", "gpio9",
-@@ -230,6 +715,17 @@
- 			clock-output-names = "acpu1_aux";
- 		};
- 
-+		l2cc: clock-controller@2011000 {
-+			compatible = "qcom,kpss-gcc", "syscon";
-+			reg = <0x2011000 0x1000>;
-+			clock-output-names = "acpu_l2_aux";
-+		};
-+
-+		kraitcc: clock-controller {
-+			compatible = "qcom,krait-cc-v1";
-+			#clock-cells = <1>;
-+		};
-+
- 		saw0: regulator@2089000 {
- 			compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
- 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-@@ -242,6 +738,52 @@
- 			regulator;
- 		};
- 
-+		saw_l2: regulator@02012000 {
-+			compatible = "qcom,saw2", "syscon";
-+			reg = <0x02012000 0x1000>;
-+			regulator;
-+		};
-+
-+		sic_non_secure: sic-non-secure@12100000 {
-+			compatible = "syscon";
-+			reg = <0x12100000 0x10000>;
-+		};
-+
-+		gsbi1: gsbi@12440000 {
-+			compatible = "qcom,gsbi-v1.0.0";
-+			cell-index = <1>;
-+			reg = <0x12440000 0x100>;
-+			clocks = <&gcc GSBI1_H_CLK>;
-+			clock-names = "iface";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges;
-+			status = "disabled";
-+
-+			syscon-tcsr = <&tcsr>;
-+
-+			gsbi1_serial: serial@12450000 {
-+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-+				reg = <0x12450000 0x100>,
-+				      <0x12400000 0x03>;
-+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-+				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
-+				clock-names = "core", "iface";
-+				status = "disabled";
-+			};
-+
-+			gsbi1_i2c: i2c@12460000 {
-+				compatible = "qcom,i2c-qup-v1.1.1";
-+				reg = <0x12460000 0x1000>;
-+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
-+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
-+				clock-names = "core", "iface";
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				status = "disabled";
-+			};
-+		};
-+
- 		gsbi2: gsbi@12480000 {
- 			compatible = "qcom,gsbi-v1.0.0";
- 			cell-index = <2>;
-@@ -367,6 +909,33 @@
- 			};
- 		};
- 
-+		gsbi6: gsbi@16500000 {
-+			status = "disabled";
-+			compatible = "qcom,gsbi-v1.0.0";
-+			cell-index = <6>;
-+			reg = <0x16500000 0x100>;
-+			clocks = <&gcc GSBI6_H_CLK>;
-+			clock-names = "iface";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges;
-+
-+			syscon-tcsr = <&tcsr>;
-+
-+			gsbi6_i2c: i2c@16580000 {
-+				compatible = "qcom,i2c-qup-v1.1.1";
-+				reg = <0x16580000 0x1000>;
-+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-+
-+				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
-+				clock-names = "core", "iface";
-+				status = "disabled";
-+
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+			};
-+		};
-+
- 		gsbi7: gsbi@16600000 {
- 			status = "disabled";
- 			compatible = "qcom,gsbi-v1.0.0";
-@@ -388,6 +957,19 @@
- 				clock-names = "core", "iface";
- 				status = "disabled";
- 			};
-+
-+			gsbi7_i2c: i2c@16680000 {
-+ 				compatible = "qcom,i2c-qup-v1.1.1";
-+ 				reg = <0x16680000 0x1000>;
-+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ 				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
-+ 				clock-names = "core", "iface";
-+				status = "disabled";
-+
-+ 				#address-cells = <1>;
-+				#size-cells = <0>;
-+			};
- 		};
- 
- 		sata_phy: sata-phy@1b400000 {
-@@ -477,6 +1059,95 @@
- 			#reset-cells = <1>;
- 		};
- 
-+		sfpb_mutex_block: syscon@1200600 {
-+			compatible = "syscon";
-+			reg = <0x01200600 0x100>;
-+		};
-+
-+		hs_phy_0: hs_phy_0 {
-+			compatible = "qcom,ipq806x-usb-phy-hs";
-+			reg = <0x100f8800 0x30>;
-+			clocks = <&gcc USB30_0_UTMI_CLK>;
-+			clock-names = "ref";
-+			#phy-cells = <0>;
-+		};
-+
-+		ss_phy_0: ss_phy_0 {
-+			compatible = "qcom,ipq806x-usb-phy-ss";
-+			reg = <0x100f8830 0x30>;
-+			clocks = <&gcc USB30_0_MASTER_CLK>;
-+			clock-names = "ref";
-+			#phy-cells = <0>;
-+		};
-+
-+		usb3_0: usb3@100f8800 {
-+			compatible = "qcom,dwc3", "syscon";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			reg = <0x100f8800 0x8000>;
-+			clocks = <&gcc USB30_0_MASTER_CLK>;
-+			clock-names = "core";
-+
-+			ranges;
-+
-+			resets = <&gcc USB30_0_MASTER_RESET>;
-+			reset-names = "master";
-+
-+			status = "disabled";
-+
-+			dwc3_0: dwc3@10000000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x10000000 0xcd00>;
-+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-+				phys = <&hs_phy_0>, <&ss_phy_0>;
-+				phy-names = "usb2-phy", "usb3-phy";
-+				dr_mode = "host";
-+				snps,dis_u3_susphy_quirk;
-+			};
-+		};
-+
-+		hs_phy_1: hs_phy_1 {
-+			compatible = "qcom,ipq806x-usb-phy-hs";
-+			reg = <0x110f8800 0x30>;
-+			clocks = <&gcc USB30_1_UTMI_CLK>;
-+			clock-names = "ref";
-+			#phy-cells = <0>;
-+		};
-+
-+		ss_phy_1: ss_phy_1 {
-+			compatible = "qcom,ipq806x-usb-phy-ss";
-+			reg = <0x110f8830 0x30>;
-+			clocks = <&gcc USB30_1_MASTER_CLK>;
-+			clock-names = "ref";
-+			#phy-cells = <0>;
-+		};
-+
-+		usb3_1: usb3@110f8800 {
-+			compatible = "qcom,dwc3", "syscon";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			reg = <0x110f8800 0x8000>;
-+			clocks = <&gcc USB30_1_MASTER_CLK>;
-+			clock-names = "core";
-+
-+			ranges;
-+
-+			resets = <&gcc USB30_1_MASTER_RESET>;
-+			reset-names = "master";
-+
-+			status = "disabled";
-+
-+			dwc3_1: dwc3@11000000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x11000000 0xcd00>;
-+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-+				phys = <&hs_phy_1>, <&ss_phy_1>;
-+				phy-names = "usb2-phy", "usb3-phy";
-+				dr_mode = "host";
-+				snps,dis_u3_susphy_quirk;
-+			};
-+		};
-+
- 		pcie0: pci@1b500000 {
- 			compatible = "qcom,pcie-ipq8064";
- 			reg = <0x1b500000 0x1000
-@@ -738,6 +1409,59 @@
- 			status = "disabled";
- 		};
- 
-+		adm_dma: dma@18300000 {
-+			compatible = "qcom,adm";
-+			reg = <0x18300000 0x100000>;
-+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-+			#dma-cells = <1>;
-+
-+			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-+			clock-names = "core", "iface";
-+
-+			resets = <&gcc ADM0_RESET>,
-+				 <&gcc ADM0_PBUS_RESET>,
-+				 <&gcc ADM0_C0_RESET>,
-+				 <&gcc ADM0_C1_RESET>,
-+				 <&gcc ADM0_C2_RESET>;
-+			reset-names = "clk", "pbus", "c0", "c1", "c2";
-+			qcom,ee = <0>;
-+
-+			status = "disabled";
-+		};
-+
-+		nand: nand-controller@1ac00000 {
-+			compatible = "qcom,ipq806x-nand";
-+			reg = <0x1ac00000 0x800>;
-+
-+			clocks = <&gcc EBI2_CLK>,
-+				 <&gcc EBI2_AON_CLK>;
-+			clock-names = "core", "aon";
-+
-+			dmas = <&adm_dma 3>;
-+			dma-names = "rxtx";
-+			qcom,cmd-crci = <15>;
-+			qcom,data-crci = <3>;
-+
-+			status = "disabled";
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+
-+		mdio0: mdio@37000000 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			compatible = "qcom,ipq8064-mdio", "syscon";
-+			reg = <0x37000000 0x200000>;
-+			resets = <&gcc GMAC_CORE1_RESET>;
-+			reset-names = "stmmaceth";
-+			clocks = <&gcc GMAC_CORE1_CLK>;
-+			clock-names = "stmmaceth";
-+
-+			status = "disabled";
-+		};
-+
- 		vsdcc_fixed: vsdcc-regulator {
- 			compatible = "regulator-fixed";
- 			regulator-name = "SDCC Power";
-@@ -813,4 +1537,17 @@
- 			};
- 		};
- 	};
-+
-+	sfpb_mutex: sfpb-mutex {
-+		compatible = "qcom,sfpb-mutex";
-+		syscon = <&sfpb_mutex_block 4 4>;
-+
-+		#hwlock-cells = <1>;
-+	};
-+
-+	smem {
-+		compatible = "qcom,smem";
-+		memory-region = <&smem>;
-+		hwlocks = <&sfpb_mutex 3>;
-+	};
- };
diff --git a/target/linux/ipq806x/patches-5.10/084-ipq8064-v1.0-dtsi-cleanup.patch b/target/linux/ipq806x/patches-5.10/084-ipq8064-v1.0-dtsi-cleanup.patch
deleted file mode 100644
index e5ea8e639339..000000000000
--- a/target/linux/ipq806x/patches-5.10/084-ipq8064-v1.0-dtsi-cleanup.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches
-instead of keeping a local version.
-We drop partitions, LEDs and keys from the file as we will implement
-them differently anyway.
-
---- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
-@@ -42,16 +42,6 @@
- 					#size-cells = <1>;
- 					spi-max-frequency = <50000000>;
- 					reg = <0>;
--
--					partition@0 {
--						label = "rootfs";
--						reg = <0x0 0x1000000>;
--					};
--
--					partition@1 {
--						label = "scratch";
--						reg = <0x1000000 0x1000000>;
--					};
- 				};
- 			};
- 		};
-@@ -64,64 +54,5 @@
- 			ports-implemented = <0x1>;
- 			status = "ok";
- 		};
--
--		gpio_keys {
--			compatible = "gpio-keys";
--			pinctrl-0 = <&buttons_pins>;
--			pinctrl-names = "default";
--
--			button@1 {
--				label = "reset";
--				linux,code = <KEY_RESTART>;
--				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
--				linux,input-type = <1>;
--				debounce-interval = <60>;
--			};
--			button@2 {
--				label = "wps";
--				linux,code = <KEY_WPS_BUTTON>;
--				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
--				linux,input-type = <1>;
--				debounce-interval = <60>;
--			};
--		};
--
--		leds {
--			compatible = "gpio-leds";
--			pinctrl-0 = <&leds_pins>;
--			pinctrl-names = "default";
--
--			led@7 {
--				label = "led_usb1";
--				gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
--				linux,default-trigger = "usbdev";
--				default-state = "off";
--			};
--
--			led@8 {
--				label = "led_usb3";
--				gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
--				linux,default-trigger = "usbdev";
--				default-state = "off";
--			};
--
--			led@9 {
--				label = "status_led_fail";
--				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
--				default-state = "off";
--			};
--
--			led@26 {
--				label = "sata_led";
--				gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
--				default-state = "off";
--			};
--
--			led@53 {
--				label = "status_led_pass";
--				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
--				default-state = "off";
--			};
--		};
- 	};
- };
diff --git a/target/linux/ipq806x/patches-5.10/085-ipq8064-v1.0-dtsi-additions.patch b/target/linux/ipq806x/patches-5.10/085-ipq8064-v1.0-dtsi-additions.patch
deleted file mode 100644
index 58f6a46e4ff0..000000000000
--- a/target/linux/ipq806x/patches-5.10/085-ipq8064-v1.0-dtsi-additions.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches
-instead of keeping a local version. This patch adds our local adjustments
-for the (local) additional contents of qcom-ipq8064.dtsi
-
---- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
-@@ -56,3 +56,7 @@
- 		};
- 	};
- };
-+
-+&CPU_SPC {
-+	status = "okay";
-+};
diff --git a/target/linux/ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch b/target/linux/ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch
deleted file mode 100644
index 747fa8c0197f..000000000000
--- a/target/linux/ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch
+++ /dev/null
@@ -1,145 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
-@@ -24,73 +24,6 @@
- 		device_type = "memory";
- 	};
- 
--	mdio0: mdio-0 {
--		status = "okay";
--		compatible = "virtual,mdio-gpio";
--		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
--			<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
--		#address-cells = <1>;
--		#size-cells = <0>;
--
--		pinctrl-0 = <&mdio0_pins>;
--		pinctrl-names = "default";
--
--		switch0: switch@10 {
--			compatible = "qca,qca8337";
--			#address-cells = <1>;
--			#size-cells = <0>;
--
--			dsa,member = <0 0>;
--
--			pinctrl-0 = <&sw0_reset_pin>;
--			pinctrl-names = "default";
--
--			reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
--			reg = <0x10>;
--
--			ports {
--				#address-cells = <1>;
--				#size-cells = <0>;
--
--				switch0cpu: port@0 {
--					reg = <0>;
--					label = "cpu";
--					ethernet = <&gmac0>;
--					phy-mode = "rgmii-id";
--					fixed-link {
--						speed = <1000>;
--						full-duplex;
--					};
--				};
--
--				port@1 {
--					reg = <1>;
--					label = "sw1";
--				};
--
--				port@2 {
--					reg = <2>;
--					label = "sw2";
--				};
--
--				port@3 {
--					reg = <3>;
--					label = "sw3";
--				};
--
--				port@4 {
--					reg = <4>;
--					label = "sw4";
--				};
--
--				port@5 {
--					reg = <5>;
--					label = "sw5";
--				};
--			};
--		};
--	};
--
- 	mdio1: mdio-1 {
- 		status = "okay";
- 		compatible = "virtual,mdio-gpio";
-@@ -216,6 +149,68 @@
- 	};
- };
- 
-+&mdio0 {
-+	status = "okay";
-+
-+	pinctrl-0 = <&mdio0_pins>;
-+	pinctrl-names = "default";
-+
-+	switch0: switch@10 {
-+		compatible = "qca,qca8337";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		dsa,member = <0 0>;
-+
-+		pinctrl-0 = <&sw0_reset_pin>;
-+		pinctrl-names = "default";
-+
-+		reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-+		reg = <0x10>;
-+
-+		ports {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			switch0cpu: port@0 {
-+				reg = <0>;
-+				label = "cpu";
-+				ethernet = <&gmac0>;
-+				phy-mode = "rgmii-id";
-+				fixed-link {
-+					speed = <1000>;
-+					full-duplex;
-+				};
-+			};
-+
-+			port@1 {
-+				reg = <1>;
-+				label = "sw1";
-+			};
-+
-+			port@2 {
-+				reg = <2>;
-+				label = "sw2";
-+			};
-+
-+			port@3 {
-+				reg = <3>;
-+				label = "sw3";
-+			};
-+
-+			port@4 {
-+				reg = <4>;
-+				label = "sw4";
-+			};
-+
-+			port@5 {
-+				reg = <5>;
-+				label = "sw5";
-+			};
-+		};
-+	};
-+};
-+
- &gmac0 {
- 	status = "okay";
- 
diff --git a/target/linux/ipq806x/patches-5.10/093-drivers-cpufreq-qcom-cpufreq-nvmem-support-specific-.patch b/target/linux/ipq806x/patches-5.10/093-drivers-cpufreq-qcom-cpufreq-nvmem-support-specific-.patch
deleted file mode 100644
index 8a25b17a192a..000000000000
--- a/target/linux/ipq806x/patches-5.10/093-drivers-cpufreq-qcom-cpufreq-nvmem-support-specific-.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From a206d4061f1cc2c5cd17ee45c53a0ba711e48e6d Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 7 Feb 2021 16:42:52 +0100
-Subject: [PATCH 3/3] drivers: cpufreq: qcom-cpufreq-nvmem: support specific
- cpufreq driver
-
-Add support for specific cpufreq driver for qcom-cpufreq-nvmem driver.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
-+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
-@@ -52,6 +52,7 @@ struct qcom_cpufreq_match_data {
- 			   char **pvs_name,
- 			   struct qcom_cpufreq_drv *drv);
- 	const char **genpd_names;
-+	const char *cpufreq_driver;
- };
- 
- struct qcom_cpufreq_drv {
-@@ -253,6 +254,7 @@ static const struct qcom_cpufreq_match_d
- 
- static const struct qcom_cpufreq_match_data match_data_krait = {
- 	.get_version = qcom_cpufreq_krait_name_version,
-+	.cpufreq_driver = "krait-cpufreq",
- };
- 
- static const char *qcs404_genpd_names[] = { "cpr", NULL };
-@@ -389,6 +391,19 @@ static int qcom_cpufreq_probe(struct pla
- 		}
- 	}
- 
-+	if (drv->data->cpufreq_driver) {
-+		cpufreq_dt_pdev = platform_device_register_simple(
-+			drv->data->cpufreq_driver, -1, NULL, 0);
-+		if (!IS_ERR(cpufreq_dt_pdev)) {
-+			platform_set_drvdata(pdev, drv);
-+			return 0;
-+		} else {
-+			dev_err(cpu_dev,
-+				"Failed to register dedicated %s cpufreq\n",
-+				drv->data->cpufreq_driver);
-+		}
-+	}
-+
- 	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
- 							  NULL, 0);
- 	if (!IS_ERR(cpufreq_dt_pdev)) {
diff --git a/target/linux/ipq806x/patches-5.10/097-1-ipq806x-gcc-add-missing-clk-flag.patch b/target/linux/ipq806x/patches-5.10/097-1-ipq806x-gcc-add-missing-clk-flag.patch
deleted file mode 100644
index 3b4900fafba4..000000000000
--- a/target/linux/ipq806x/patches-5.10/097-1-ipq806x-gcc-add-missing-clk-flag.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 0af44917941cbfecdc86bb9bf05ff01d22a88973 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 7 Feb 2021 16:52:56 +0100
-Subject: [PATCH 1/4] ipq806x: gcc: add missing clk flag
-
-Some flag are missing from the original code.
-These clk can't be set using the protected-clock proprities as they
-cause the malfunction of the serial interface.
-These clks are needed for the rpm interface to work proprely or the
-cpu regulators starts to fail as soon as they are disabled by the
-kernel.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/clk/qcom/gcc-ipq806x.c | 19 +++++++++++++------
- 1 file changed, 13 insertions(+), 6 deletions(-)
-
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -65,6 +65,7 @@ static struct clk_pll pll3 = {
- 		.parent_names = (const char *[]){ "pxo" },
- 		.num_parents = 1,
- 		.ops = &clk_pll_ops,
-+		.flags = CLK_IS_CRITICAL,
- 	},
- };
- 
-@@ -782,7 +783,7 @@ static struct clk_rcg gsbi4_qup_src = {
- 			.parent_names = gcc_pxo_pll8,
- 			.num_parents = 2,
- 			.ops = &clk_rcg_ops,
--			.flags = CLK_SET_PARENT_GATE,
-+			.flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
- 		},
- 	},
- };
-@@ -798,7 +799,7 @@ static struct clk_branch gsbi4_qup_clk =
- 			.parent_names = (const char *[]){ "gsbi4_qup_src" },
- 			.num_parents = 1,
- 			.ops = &clk_branch_ops,
--			.flags = CLK_SET_RATE_PARENT,
-+			.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
- 		},
- 	},
- };
-@@ -880,7 +881,7 @@ static struct clk_rcg gsbi6_qup_src = {
- 			.parent_names = gcc_pxo_pll8,
- 			.num_parents = 2,
- 			.ops = &clk_rcg_ops,
--			.flags = CLK_SET_PARENT_GATE,
-+			.flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
- 		},
- 	},
- };
-@@ -945,7 +946,7 @@ static struct clk_branch gsbi7_qup_clk =
- 			.parent_names = (const char *[]){ "gsbi7_qup_src" },
- 			.num_parents = 1,
- 			.ops = &clk_branch_ops,
--			.flags = CLK_SET_RATE_PARENT,
-+			.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
- 		},
- 	},
- };
-@@ -991,6 +992,7 @@ static struct clk_branch gsbi4_h_clk = {
- 		.hw.init = &(struct clk_init_data){
- 			.name = "gsbi4_h_clk",
- 			.ops = &clk_branch_ops,
-+			.flags = CLK_IGNORE_UNUSED,
- 		},
- 	},
- };
-@@ -1424,6 +1426,7 @@ static struct clk_rcg tsif_ref_src = {
- 			.parent_names = gcc_pxo_pll8,
- 			.num_parents = 2,
- 			.ops = &clk_rcg_ops,
-+			.flags = CLK_SET_RATE_GATE,
- 		},
- 	}
- };
-@@ -2694,7 +2697,8 @@ static struct clk_dyn_rcg ubi32_core1_sr
- 			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
- 			.num_parents = 5,
- 			.ops = &clk_dyn_rcg_ops,
--			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
-+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE |
-+				 CLK_IGNORE_UNUSED,
- 		},
- 	},
- };
-@@ -2747,7 +2751,8 @@ static struct clk_dyn_rcg ubi32_core2_sr
- 			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
- 			.num_parents = 5,
- 			.ops = &clk_dyn_rcg_ops,
--			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
-+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE |
-+				 CLK_IGNORE_UNUSED,
- 		},
- 	},
- };
diff --git a/target/linux/ipq806x/patches-5.10/097-2-ipq806x-lcc-add-missing-reset.patch b/target/linux/ipq806x/patches-5.10/097-2-ipq806x-lcc-add-missing-reset.patch
deleted file mode 100644
index cd2cb3335644..000000000000
--- a/target/linux/ipq806x/patches-5.10/097-2-ipq806x-lcc-add-missing-reset.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 3a5f1793c0bf4a6b536751886b0a44589fe05f35 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 7 Feb 2021 17:00:07 +0100
-Subject: [PATCH 2/4] ipq806x: lcc: add missing reset
-
-Add missing reset for ipq806x lcc clk
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/clk/qcom/lcc-ipq806x.c               | 8 ++++++++
- include/dt-bindings/clock/qcom,lcc-ipq806x.h | 1 +
- 2 files changed, 9 insertions(+)
-
---- a/drivers/clk/qcom/lcc-ipq806x.c
-+++ b/drivers/clk/qcom/lcc-ipq806x.c
-@@ -12,6 +12,7 @@
- #include <linux/of_device.h>
- #include <linux/clk-provider.h>
- #include <linux/regmap.h>
-+#include <linux/reset-controller.h>
- 
- #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
- 
-@@ -22,6 +23,7 @@
- #include "clk-branch.h"
- #include "clk-regmap-divider.h"
- #include "clk-regmap-mux.h"
-+#include "reset.h"
- 
- static struct clk_pll pll4 = {
- 	.l_reg = 0x4,
-@@ -39,6 +41,10 @@ static struct clk_pll pll4 = {
- 	},
- };
- 
-+static const struct qcom_reset_map lcc_ipq806x_resets[] = {
-+	[LCC_PCM_RESET] = { 0x54, 13 },
-+};
-+
- static const struct pll_config pll4_config = {
- 	.l = 0xf,
- 	.m = 0x91,
-@@ -417,6 +423,8 @@ static const struct qcom_cc_desc lcc_ipq
- 	.config = &lcc_ipq806x_regmap_config,
- 	.clks = lcc_ipq806x_clks,
- 	.num_clks = ARRAY_SIZE(lcc_ipq806x_clks),
-+	.resets = lcc_ipq806x_resets,
-+	.num_resets = ARRAY_SIZE(lcc_ipq806x_resets),
- };
- 
- static const struct of_device_id lcc_ipq806x_match_table[] = {
---- a/include/dt-bindings/clock/qcom,lcc-ipq806x.h
-+++ b/include/dt-bindings/clock/qcom,lcc-ipq806x.h
-@@ -19,4 +19,5 @@
- #define SPDIF_CLK			10
- #define AHBIX_CLK			11
- 
-+#define LCC_PCM_RESET			0
- #endif
diff --git a/target/linux/ipq806x/patches-5.10/097-3-clk-qcom-krait-add-missing-enable-disable.patch b/target/linux/ipq806x/patches-5.10/097-3-clk-qcom-krait-add-missing-enable-disable.patch
deleted file mode 100644
index 78068f359c43..000000000000
--- a/target/linux/ipq806x/patches-5.10/097-3-clk-qcom-krait-add-missing-enable-disable.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From f8fdbecdaca97f0f2eebd77256e2eca4a8da6c39 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 7 Feb 2021 17:08:16 +0100
-Subject: [PATCH 3/4] clk: qcom: krait: add missing enable disable
-
-Add missing enable disable mux function. Add extra check to
-div2_round_rate.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/clk/qcom/clk-krait.c | 27 +++++++++++++++++++++++++--
- 1 file changed, 25 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/qcom/clk-krait.c
-+++ b/drivers/clk/qcom/clk-krait.c
-@@ -73,7 +73,25 @@ static u8 krait_mux_get_parent(struct cl
- 	return clk_mux_val_to_index(hw, mux->parent_map, 0, sel);
- }
- 
-+static int krait_mux_enable(struct clk_hw *hw)
-+{
-+	struct krait_mux_clk *mux = to_krait_mux_clk(hw);
-+
-+	__krait_mux_set_sel(mux, mux->en_mask);
-+
-+	return 0;
-+}
-+
-+static void krait_mux_disable(struct clk_hw *hw)
-+{
-+	struct krait_mux_clk *mux = to_krait_mux_clk(hw);
-+
-+	__krait_mux_set_sel(mux, mux->safe_sel);
-+}
-+
- const struct clk_ops krait_mux_clk_ops = {
-+	.enable = krait_mux_enable,
-+	.disable = krait_mux_disable,
- 	.set_parent = krait_mux_set_parent,
- 	.get_parent = krait_mux_get_parent,
- 	.determine_rate = __clk_mux_determine_rate_closest,
-@@ -84,8 +102,13 @@ EXPORT_SYMBOL_GPL(krait_mux_clk_ops);
- static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate,
- 				  unsigned long *parent_rate)
- {
--	*parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2);
--	return DIV_ROUND_UP(*parent_rate, 2);
-+	struct clk_hw *hw_parent = clk_hw_get_parent(hw);
-+
-+	if (hw_parent) {
-+		*parent_rate = clk_hw_round_rate(hw_parent, rate * 2);
-+		return DIV_ROUND_UP(*parent_rate, 2);
-+	} else
-+		return -1;
- }
- 
- static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate,
diff --git a/target/linux/ipq806x/patches-5.10/097-4-ipq806x-gcc-add-missing-clk-and-reset-for-crypto-eng.patch b/target/linux/ipq806x/patches-5.10/097-4-ipq806x-gcc-add-missing-clk-and-reset-for-crypto-eng.patch
deleted file mode 100644
index d1e047cabf02..000000000000
--- a/target/linux/ipq806x/patches-5.10/097-4-ipq806x-gcc-add-missing-clk-and-reset-for-crypto-eng.patch
+++ /dev/null
@@ -1,372 +0,0 @@
-From 22a0f55b0e505fbbbb680e451a62878bc97f7ff1 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 7 Feb 2021 17:23:38 +0100
-Subject: [PATCH 4/4] ipq806x: gcc: add missing clk and reset for crypto engine
-
-Add missing clk and reset needed for nss additional core and crypto
-engine.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/clk/qcom/gcc-ipq806x.c               | 250 +++++++++++++++++++
- include/dt-bindings/clock/qcom,gcc-ipq806x.h |   5 +-
- include/dt-bindings/reset/qcom,gcc-ipq806x.h |   5 +
- 3 files changed, 259 insertions(+), 1 deletion(-)
-
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -223,7 +223,9 @@ static struct clk_regmap pll14_vote = {
- 
- static struct pll_freq_tbl pll18_freq_tbl[] = {
- 	NSS_PLL_RATE(550000000, 44, 0, 1, 0x01495625),
-+	NSS_PLL_RATE(600000000, 48, 0, 1, 0x01495625),
- 	NSS_PLL_RATE(733000000, 58, 16, 25, 0x014b5625),
-+	NSS_PLL_RATE(800000000, 64, 0, 1, 0x01495625),
- };
- 
- static struct clk_pll pll18 = {
-@@ -245,6 +247,22 @@ static struct clk_pll pll18 = {
- 	},
- };
- 
-+static struct clk_pll pll11 = {
-+	.l_reg = 0x3184,
-+	.m_reg = 0x3188,
-+	.n_reg = 0x318c,
-+	.config_reg = 0x3194,
-+	.mode_reg = 0x3180,
-+	.status_reg = 0x3198,
-+	.status_bit = 16,
-+	.clkr.hw.init = &(struct clk_init_data){
-+		.name = "pll11",
-+		.parent_names = (const char *[]){ "pxo" },
-+		.num_parents = 1,
-+		.ops = &clk_pll_ops,
-+	},
-+};
-+
- enum {
- 	P_PXO,
- 	P_PLL8,
-@@ -253,6 +271,7 @@ enum {
- 	P_CXO,
- 	P_PLL14,
- 	P_PLL18,
-+	P_PLL11,
- };
- 
- static const struct parent_map gcc_pxo_pll8_map[] = {
-@@ -320,6 +339,42 @@ static const char * const gcc_pxo_pll8_p
- 	"pll18",
- };
- 
-+static const struct parent_map gcc_pxo_pll8_pll0_pll14_pll18_pll11_map[] = {
-+	{ P_PXO, 0 },
-+	{ P_PLL8, 4 },
-+	{ P_PLL0, 2 },
-+	{ P_PLL14, 5 },
-+	{ P_PLL18, 1 },
-+	{ P_PLL11, 3 },
-+};
-+
-+static const char *gcc_pxo_pll8_pll0_pll14_pll18_pll11[] = {
-+	"pxo",
-+	"pll8_vote",
-+	"pll0_vote",
-+	"pll14",
-+	"pll18",
-+	"pll11"
-+};
-+
-+static const struct parent_map gcc_pxo_pll3_pll0_pll14_pll18_pll11_map[] = {
-+	{ P_PXO, 0 },
-+	{ P_PLL3, 6 },
-+	{ P_PLL0, 2 },
-+	{ P_PLL14, 5 },
-+	{ P_PLL18, 1 },
-+	{ P_PLL11, 3 },
-+};
-+
-+static const char *gcc_pxo_pll3_pll0_pll14_pll18_pll11[] = {
-+	"pxo",
-+	"pll3",
-+	"pll0_vote",
-+	"pll14",
-+	"pll18",
-+	"pll11"
-+};
-+
- static struct freq_tbl clk_tbl_gsbi_uart[] = {
- 	{  1843200, P_PLL8, 2,  6, 625 },
- 	{  3686400, P_PLL8, 2, 12, 625 },
-@@ -1261,6 +1316,7 @@ static const struct freq_tbl clk_tbl_sdc
- 	{  20210000, P_PLL8,  1, 1,  19 },
- 	{  24000000, P_PLL8,  4, 1,   4 },
- 	{  48000000, P_PLL8,  4, 1,   2 },
-+	{  52000000, P_PLL8,  1, 2,  15 }, /* 51.2 Mhz */
- 	{  64000000, P_PLL8,  3, 1,   2 },
- 	{  96000000, P_PLL8,  4, 0,   0 },
- 	{ 192000000, P_PLL8,  2, 0,   0 },
-@@ -2645,7 +2701,9 @@ static const struct freq_tbl clk_tbl_nss
- 	{ 110000000, P_PLL18, 1, 1, 5 },
- 	{ 275000000, P_PLL18, 2, 0, 0 },
- 	{ 550000000, P_PLL18, 1, 0, 0 },
-+	{ 600000000, P_PLL18, 1, 0, 0 },
- 	{ 733000000, P_PLL18, 1, 0, 0 },
-+	{ 800000000, P_PLL18, 1, 0, 0 },
- 	{ }
- };
- 
-@@ -2757,6 +2815,186 @@ static struct clk_dyn_rcg ubi32_core2_sr
- 	},
- };
- 
-+static const struct freq_tbl clk_tbl_ce5_core[] = {
-+	{ 150000000, P_PLL3, 8, 1, 1 },
-+	{ 213200000, P_PLL11, 5, 1, 1 },
-+	{ }
-+};
-+
-+static struct clk_dyn_rcg ce5_core_src = {
-+	.ns_reg[0] = 0x36C4,
-+	.ns_reg[1] = 0x36C8,
-+	.bank_reg = 0x36C0,
-+	.s[0] = {
-+		.src_sel_shift = 0,
-+		.parent_map = gcc_pxo_pll3_pll0_pll14_pll18_pll11_map,
-+	},
-+	.s[1] = {
-+		.src_sel_shift = 0,
-+		.parent_map = gcc_pxo_pll3_pll0_pll14_pll18_pll11_map,
-+	},
-+	.p[0] = {
-+		.pre_div_shift = 3,
-+		.pre_div_width = 4,
-+	},
-+	.p[1] = {
-+		.pre_div_shift = 3,
-+		.pre_div_width = 4,
-+	},
-+	.mux_sel_bit = 0,
-+	.freq_tbl = clk_tbl_ce5_core,
-+	.clkr = {
-+		.enable_reg = 0x36C0,
-+		.enable_mask = BIT(1),
-+		.hw.init = &(struct clk_init_data){
-+			.name = "ce5_core_src",
-+			.parent_names = gcc_pxo_pll3_pll0_pll14_pll18_pll11,
-+			.num_parents = 6,
-+			.ops = &clk_dyn_rcg_ops,
-+		},
-+	},
-+};
-+
-+static struct clk_branch ce5_core_clk = {
-+	.halt_reg = 0x2FDC,
-+	.halt_bit = 5,
-+	.hwcg_reg = 0x36CC,
-+	.hwcg_bit = 6,
-+	.clkr = {
-+		.enable_reg = 0x36CC,
-+		.enable_mask = BIT(4),
-+		.hw.init = &(struct clk_init_data){
-+			.name = "ce5_core_clk",
-+			.parent_names = (const char *[]){
-+				"ce5_core_src",
-+			},
-+			.num_parents = 1,
-+			.ops = &clk_branch_ops,
-+			.flags = CLK_SET_RATE_PARENT,
-+		},
-+	},
-+};
-+
-+static const struct freq_tbl clk_tbl_ce5_a_clk[] = {
-+	{ 160000000, P_PLL0, 5, 1, 1 },
-+	{ 213200000, P_PLL11, 5, 1, 1 },
-+	{ }
-+};
-+
-+static struct clk_dyn_rcg ce5_a_clk_src = {
-+	.ns_reg[0] = 0x3d84,
-+	.ns_reg[1] = 0x3d88,
-+	.bank_reg = 0x3d80,
-+	.s[0] = {
-+		.src_sel_shift = 0,
-+		.parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map,
-+	},
-+	.s[1] = {
-+		.src_sel_shift = 0,
-+		.parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map,
-+	},
-+	.p[0] = {
-+		.pre_div_shift = 3,
-+		.pre_div_width = 4,
-+	},
-+	.p[1] = {
-+		.pre_div_shift = 3,
-+		.pre_div_width = 4,
-+	},
-+	.mux_sel_bit = 0,
-+	.freq_tbl = clk_tbl_ce5_a_clk,
-+	.clkr = {
-+		.enable_reg = 0x3d80,
-+		.enable_mask = BIT(1),
-+		.hw.init = &(struct clk_init_data){
-+			.name = "ce5_a_clk_src",
-+			.parent_names = gcc_pxo_pll8_pll0_pll14_pll18_pll11,
-+			.num_parents = 6,
-+			.ops = &clk_dyn_rcg_ops,
-+		},
-+	},
-+};
-+
-+static struct clk_branch ce5_a_clk = {
-+	.halt_reg = 0x3c20,
-+	.halt_bit = 12,
-+	.hwcg_reg = 0x3d8c,
-+	.hwcg_bit = 6,
-+	.clkr = {
-+		.enable_reg = 0x3d8c,
-+		.enable_mask = BIT(4),
-+		.hw.init = &(struct clk_init_data){
-+			.name = "ce5_a_clk",
-+			.parent_names = (const char *[]){
-+				"ce5_a_clk_src",
-+			},
-+			.num_parents = 1,
-+			.ops = &clk_branch_ops,
-+			.flags = CLK_SET_RATE_PARENT,
-+		},
-+	},
-+};
-+
-+static const struct freq_tbl clk_tbl_ce5_h_clk[] = {
-+	{ 160000000, P_PLL0, 5, 1, 1 },
-+	{ 213200000, P_PLL11, 5, 1, 1 },
-+	{ }
-+};
-+
-+static struct clk_dyn_rcg ce5_h_clk_src = {
-+	.ns_reg[0] = 0x3c64,
-+	.ns_reg[1] = 0x3c68,
-+	.bank_reg = 0x3c60,
-+	.s[0] = {
-+		.src_sel_shift = 0,
-+		.parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map,
-+	},
-+	.s[1] = {
-+		.src_sel_shift = 0,
-+		.parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map,
-+	},
-+	.p[0] = {
-+		.pre_div_shift = 3,
-+		.pre_div_width = 4,
-+	},
-+	.p[1] = {
-+		.pre_div_shift = 3,
-+		.pre_div_width = 4,
-+	},
-+	.mux_sel_bit = 0,
-+	.freq_tbl = clk_tbl_ce5_h_clk,
-+	.clkr = {
-+		.enable_reg = 0x3c60,
-+		.enable_mask = BIT(1),
-+		.hw.init = &(struct clk_init_data){
-+			.name = "ce5_h_clk_src",
-+			.parent_names = gcc_pxo_pll8_pll0_pll14_pll18_pll11,
-+			.num_parents = 6,
-+			.ops = &clk_dyn_rcg_ops,
-+		},
-+	},
-+};
-+
-+static struct clk_branch ce5_h_clk = {
-+	.halt_reg = 0x3c20,
-+	.halt_bit = 11,
-+	.hwcg_reg = 0x3c6c,
-+	.hwcg_bit = 6,
-+	.clkr = {
-+		.enable_reg = 0x3c6c,
-+		.enable_mask = BIT(4),
-+		.hw.init = &(struct clk_init_data){
-+			.name = "ce5_h_clk",
-+			.parent_names = (const char *[]){
-+				"ce5_h_clk_src",
-+			},
-+			.num_parents = 1,
-+			.ops = &clk_branch_ops,
-+			.flags = CLK_SET_RATE_PARENT,
-+		},
-+	},
-+};
-+
- static struct clk_regmap *gcc_ipq806x_clks[] = {
- 	[PLL0] = &pll0.clkr,
- 	[PLL0_VOTE] = &pll0_vote,
-@@ -2764,6 +3002,7 @@ static struct clk_regmap *gcc_ipq806x_cl
- 	[PLL4_VOTE] = &pll4_vote,
- 	[PLL8] = &pll8.clkr,
- 	[PLL8_VOTE] = &pll8_vote,
-+	[PLL11] = &pll11.clkr,
- 	[PLL14] = &pll14.clkr,
- 	[PLL14_VOTE] = &pll14_vote,
- 	[PLL18] = &pll18.clkr,
-@@ -2878,6 +3117,12 @@ static struct clk_regmap *gcc_ipq806x_cl
- 	[PLL9] = &hfpll0.clkr,
- 	[PLL10] = &hfpll1.clkr,
- 	[PLL12] = &hfpll_l2.clkr,
-+	[CE5_A_CLK_SRC] = &ce5_a_clk_src.clkr,
-+	[CE5_A_CLK] = &ce5_a_clk.clkr,
-+	[CE5_H_CLK_SRC] = &ce5_h_clk_src.clkr,
-+	[CE5_H_CLK] = &ce5_h_clk.clkr,
-+	[CE5_CORE_CLK_SRC] = &ce5_core_src.clkr,
-+	[CE5_CORE_CLK] = &ce5_core_clk.clkr,
- };
- 
- static const struct qcom_reset_map gcc_ipq806x_resets[] = {
-@@ -3009,6 +3254,11 @@ static const struct qcom_reset_map gcc_i
- 	[GMAC_CORE3_RESET] = { 0x3cfc, 0 },
- 	[GMAC_CORE4_RESET] = { 0x3d1c, 0 },
- 	[GMAC_AHB_RESET] = { 0x3e24, 0 },
-+	[CRYPTO_ENG1_RESET] = { 0x3e00, 0},
-+	[CRYPTO_ENG2_RESET] = { 0x3e04, 0},
-+	[CRYPTO_ENG3_RESET] = { 0x3e08, 0},
-+	[CRYPTO_ENG4_RESET] = { 0x3e0c, 0},
-+	[CRYPTO_AHB_RESET] = { 0x3e10, 0},
- 	[NSS_CH0_RST_RX_CLK_N_RESET] = { 0x3b60, 0 },
- 	[NSS_CH0_RST_TX_CLK_N_RESET] = { 0x3b60, 1 },
- 	[NSS_CH0_RST_RX_125M_N_RESET] = { 0x3b60, 2 },
---- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
-+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
-@@ -240,7 +240,7 @@
- #define PLL14					232
- #define PLL14_VOTE				233
- #define PLL18					234
--#define CE5_SRC					235
-+#define CE5_A_CLK				235
- #define CE5_H_CLK				236
- #define CE5_CORE_CLK				237
- #define CE3_SLEEP_CLK				238
-@@ -283,5 +283,8 @@
- #define EBI2_AON_CLK				281
- #define NSSTCM_CLK_SRC				282
- #define NSSTCM_CLK				283
-+#define CE5_A_CLK_SRC				285
-+#define CE5_H_CLK_SRC				286
-+#define CE5_CORE_CLK_SRC			287
- 
- #endif
---- a/include/dt-bindings/reset/qcom,gcc-ipq806x.h
-+++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
-@@ -163,5 +163,10 @@
- #define NSS_CAL_PRBS_RST_N_RESET			154
- #define NSS_LCKDT_RST_N_RESET				155
- #define NSS_SRDS_N_RESET				156
-+#define CRYPTO_ENG1_RESET				157
-+#define CRYPTO_ENG2_RESET				158
-+#define CRYPTO_ENG3_RESET				159
-+#define CRYPTO_ENG4_RESET				160
-+#define CRYPTO_AHB_RESET				161
- 
- #endif
diff --git a/target/linux/ipq806x/patches-5.10/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch b/target/linux/ipq806x/patches-5.10/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch
deleted file mode 100644
index d3677253f6d6..000000000000
--- a/target/linux/ipq806x/patches-5.10/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch
+++ /dev/null
@@ -1,687 +0,0 @@
-From cc41a266280cad0b55319e614167c88dff344248 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sat, 22 Feb 2020 16:33:10 +0100
-Subject: [PATCH 1/8] cpufreq: add Krait dedicated scaling driver
-
-This new driver is based on generic cpufreq-dt driver.
-Krait SoCs have 2-4 cpu and one shared L2 cache that can
-operate at different frequency based on the maximum cpu clk
-across all core.
-L2 frequency and voltage are scaled on every frequency change
-if needed. On Krait SoCs is present a bug that can cause
-transition problem between frequency bin, to workaround this
-on more than one transition, the L2 frequency is first set to the
-base rate and then to the target rate.
-The L2 frequency use the OPP framework and use the opp-level
-bindings to link the l2 freq to different cpu freq. This is needed
-as the Krait l2 clk are note mapped 1:1 to the core clks and some
-of the l2 clk is set based on a range of the cpu clks. If the driver
-find a broken config (for example no opp-level set) the l2 scaling is
-skipped.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/cpufreq/Kconfig.arm          |  14 +-
- drivers/cpufreq/Makefile             |   2 +
- drivers/cpufreq/qcom-cpufreq-krait.c | 589 +++++++++++++++++++++++++++
- 3 files changed, 604 insertions(+), 1 deletion(-)
- create mode 100644 drivers/cpufreq/qcom-cpufreq-krait.c
-
---- a/drivers/cpufreq/Kconfig.arm
-+++ b/drivers/cpufreq/Kconfig.arm
-@@ -150,6 +150,18 @@ config ARM_QCOM_CPUFREQ_HW
- 	  The driver implements the cpufreq interface for this HW engine.
- 	  Say Y if you want to support CPUFreq HW.
- 
-+config ARM_QCOM_CPUFREQ_KRAIT
-+	tristate "CPU Frequency scaling support for Krait SoCs"
-+	depends on ARCH_QCOM || COMPILE_TEST
-+	select PM_OPP
-+	select ARM_QCOM_CPUFREQ_NVMEM
-+	help
-+	  This adds the CPUFreq driver for Qualcomm Krait SoC based boards.
-+	  This scale the cache clk and regulator based on the different cpu
-+	  clks when scaling the different cores clk.
-+
-+	  If in doubt, say N.
-+
- config ARM_RASPBERRYPI_CPUFREQ
- 	tristate "Raspberry Pi cpufreq support"
- 	depends on CLK_RASPBERRYPI || COMPILE_TEST
-@@ -339,4 +351,4 @@ config ARM_PXA2xx_CPUFREQ
- 	help
- 	  This add the CPUFreq driver support for Intel PXA2xx SOCs.
- 
--	  If in doubt, say N.
-+	  If in doubt, say N.
-\ No newline at end of file
---- a/drivers/cpufreq/Makefile
-+++ b/drivers/cpufreq/Makefile
-@@ -63,6 +63,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2
- obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
- obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW)	+= qcom-cpufreq-hw.o
- obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM)	+= qcom-cpufreq-nvmem.o
-+obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRAIT)	+= qcom-cpufreq-krait.o
- obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) 	+= raspberrypi-cpufreq.o
- obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
- obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
-@@ -86,6 +87,7 @@ obj-$(CONFIG_ARM_TEGRA186_CPUFREQ)	+= te
- obj-$(CONFIG_ARM_TEGRA194_CPUFREQ)	+= tegra194-cpufreq.o
- obj-$(CONFIG_ARM_TI_CPUFREQ)		+= ti-cpufreq.o
- obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ)	+= vexpress-spc-cpufreq.o
-+obj-$(CONFIG_ARM_KRAIT_CPUFREQ)		+= krait-cpufreq.o
- 
- 
- ##################################################################################
---- /dev/null
-+++ b/drivers/cpufreq/qcom-cpufreq-krait.c
-@@ -0,0 +1,609 @@
-+// SPDX-License-Identifier: GPL-2.0
-+
-+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-+
-+#include <linux/clk.h>
-+#include <linux/cpu.h>
-+#include <linux/cpufreq.h>
-+#include <linux/cpumask.h>
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/pm_opp.h>
-+#include <linux/platform_device.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/slab.h>
-+#include <linux/thermal.h>
-+
-+#include "cpufreq-dt.h"
-+
-+static struct platform_device *l2_pdev;
-+
-+struct private_data {
-+	struct opp_table *opp_table;
-+	struct device *cpu_dev;
-+	const char *reg_name;
-+	bool have_static_opps;
-+};
-+
-+static int set_target(struct cpufreq_policy *policy, unsigned int index)
-+{
-+	struct private_data *priv = policy->driver_data;
-+	unsigned long freq = policy->freq_table[index].frequency;
-+	unsigned long target_freq = freq * 1000;
-+	struct dev_pm_opp *opp;
-+	unsigned int level;
-+	int cpu, ret;
-+
-+	if (l2_pdev) {
-+		int policy_cpu = policy->cpu;
-+
-+		/* find the max freq across all core */
-+		for_each_present_cpu(cpu)
-+			if (cpu != policy_cpu)
-+				target_freq = max(
-+					target_freq,
-+					(unsigned long)cpufreq_quick_get(cpu));
-+
-+		opp = dev_pm_opp_find_freq_exact(priv->cpu_dev, target_freq,
-+						 true);
-+		if (IS_ERR(opp)) {
-+			dev_err(&l2_pdev->dev, "failed to find OPP for %ld\n",
-+				target_freq);
-+			return PTR_ERR(opp);
-+		}
-+		level = dev_pm_opp_get_level(opp);
-+		dev_pm_opp_put(opp);
-+
-+		/*
-+		 * Hardware constraint:
-+		 * Krait CPU cannot operate at 384MHz with L2 at 1Ghz.
-+		 * Assume index 0 with the idle freq and level > 0 as 
-+		 * any L2 freq > 384MHz.
-+		 * Skip CPU freq change in this corner case.
-+		 */
-+		if (unlikely(index == 0 && level != 0)) {
-+			dev_err(priv->cpu_dev, "Krait CPU can't operate at idle freq with L2 at 1GHz");
-+			return -EINVAL;
-+		}
-+
-+		opp = dev_pm_opp_find_level_exact(&l2_pdev->dev, level);
-+		if (IS_ERR(opp)) {
-+			dev_err(&l2_pdev->dev,
-+				"failed to find level OPP for %d\n", level);
-+			return PTR_ERR(opp);
-+		}
-+		target_freq = dev_pm_opp_get_freq(opp);
-+		dev_pm_opp_put(opp);
-+
-+		ret = dev_pm_opp_set_rate(&l2_pdev->dev, target_freq);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000);
-+	if (ret)
-+		return ret;
-+
-+	arch_set_freq_scale(policy->related_cpus, freq,
-+			    policy->cpuinfo.max_freq);
-+
-+	return 0;
-+}
-+
-+/*
-+ * An earlier version of opp-v1 bindings used to name the regulator
-+ * "cpu0-supply", we still need to handle that for backwards compatibility.
-+ */
-+static const char *find_supply_name(struct device *dev)
-+{
-+	struct device_node *np;
-+	struct property *pp;
-+	int cpu = dev->id;
-+	const char *name = NULL;
-+
-+	np = of_node_get(dev->of_node);
-+
-+	/* This must be valid for sure */
-+	if (WARN_ON(!np))
-+		return NULL;
-+
-+	/* Try "cpu0" for older DTs */
-+	if (!cpu) {
-+		pp = of_find_property(np, "cpu0-supply", NULL);
-+		if (pp) {
-+			name = "cpu0";
-+			goto node_put;
-+		}
-+	}
-+
-+	pp = of_find_property(np, "cpu-supply", NULL);
-+	if (pp) {
-+		name = "cpu";
-+		goto node_put;
-+	}
-+
-+	dev_dbg(dev, "no regulator for cpu%d\n", cpu);
-+node_put:
-+	of_node_put(np);
-+	return name;
-+}
-+
-+static int resources_available(void)
-+{
-+	struct device *cpu_dev;
-+	struct regulator *cpu_reg;
-+	struct clk *cpu_clk;
-+	int ret = 0;
-+	const char *name;
-+
-+	cpu_dev = get_cpu_device(0);
-+	if (!cpu_dev) {
-+		pr_err("failed to get cpu0 device\n");
-+		return -ENODEV;
-+	}
-+
-+	cpu_clk = clk_get(cpu_dev, NULL);
-+	ret = PTR_ERR_OR_ZERO(cpu_clk);
-+	if (ret) {
-+		/*
-+		 * If cpu's clk node is present, but clock is not yet
-+		 * registered, we should try defering probe.
-+		 */
-+		if (ret == -EPROBE_DEFER)
-+			dev_dbg(cpu_dev, "clock not ready, retry\n");
-+		else
-+			dev_err(cpu_dev, "failed to get clock: %d\n", ret);
-+
-+		return ret;
-+	}
-+
-+	clk_put(cpu_clk);
-+
-+	name = find_supply_name(cpu_dev);
-+	/* Platform doesn't require regulator */
-+	if (!name)
-+		return 0;
-+
-+	cpu_reg = regulator_get_optional(cpu_dev, name);
-+	ret = PTR_ERR_OR_ZERO(cpu_reg);
-+	if (ret) {
-+		/*
-+		 * If cpu's regulator supply node is present, but regulator is
-+		 * not yet registered, we should try defering probe.
-+		 */
-+		if (ret == -EPROBE_DEFER)
-+			dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n");
-+		else
-+			dev_dbg(cpu_dev, "no regulator for cpu0: %d\n", ret);
-+
-+		return ret;
-+	}
-+
-+	regulator_put(cpu_reg);
-+	return 0;
-+}
-+
-+static int cpufreq_init(struct cpufreq_policy *policy)
-+{
-+	struct cpufreq_frequency_table *freq_table;
-+	struct opp_table *opp_table = NULL;
-+	unsigned int transition_latency;
-+	struct private_data *priv;
-+	struct device *cpu_dev;
-+	bool fallback = false;
-+	struct clk *cpu_clk;
-+	const char *name;
-+	int ret;
-+
-+	cpu_dev = get_cpu_device(policy->cpu);
-+	if (!cpu_dev) {
-+		pr_err("failed to get cpu%d device\n", policy->cpu);
-+		return -ENODEV;
-+	}
-+
-+	cpu_clk = clk_get(cpu_dev, NULL);
-+	if (IS_ERR(cpu_clk)) {
-+		ret = PTR_ERR(cpu_clk);
-+		dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret);
-+		return ret;
-+	}
-+
-+	/* Get OPP-sharing information from "operating-points-v2" bindings */
-+	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus);
-+	if (ret) {
-+		if (ret != -ENOENT)
-+			goto out_put_clk;
-+
-+		/*
-+		 * operating-points-v2 not supported, fallback to old method of
-+		 * finding shared-OPPs for backward compatibility if the
-+		 * platform hasn't set sharing CPUs.
-+		 */
-+		if (dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus))
-+			fallback = true;
-+	}
-+
-+	/*
-+	 * OPP layer will be taking care of regulators now, but it needs to know
-+	 * the name of the regulator first.
-+	 */
-+	name = find_supply_name(cpu_dev);
-+	if (name) {
-+		opp_table = dev_pm_opp_set_regulators(cpu_dev, &name, 1);
-+		if (IS_ERR(opp_table)) {
-+			ret = PTR_ERR(opp_table);
-+			dev_err(cpu_dev,
-+				"Failed to set regulator for cpu%d: %d\n",
-+				policy->cpu, ret);
-+			goto out_put_clk;
-+		}
-+	}
-+
-+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-+	if (!priv) {
-+		ret = -ENOMEM;
-+		goto out_put_regulator;
-+	}
-+
-+	priv->reg_name = name;
-+	priv->opp_table = opp_table;
-+
-+	/*
-+	 * Initialize OPP tables for all policy->cpus. They will be shared by
-+	 * all CPUs which have marked their CPUs shared with OPP bindings.
-+	 *
-+	 * For platforms not using operating-points-v2 bindings, we do this
-+	 * before updating policy->cpus. Otherwise, we will end up creating
-+	 * duplicate OPPs for policy->cpus.
-+	 *
-+	 * OPPs might be populated at runtime, don't check for error here
-+	 */
-+	if (!dev_pm_opp_of_cpumask_add_table(policy->cpus))
-+		priv->have_static_opps = true;
-+
-+	/*
-+	 * But we need OPP table to function so if it is not there let's
-+	 * give platform code chance to provide it for us.
-+	 */
-+	ret = dev_pm_opp_get_opp_count(cpu_dev);
-+	if (ret <= 0) {
-+		dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n");
-+		ret = -EPROBE_DEFER;
-+		goto out_free_opp;
-+	}
-+
-+	if (fallback) {
-+		cpumask_setall(policy->cpus);
-+
-+		/*
-+		 * OPP tables are initialized only for policy->cpu, do it for
-+		 * others as well.
-+		 */
-+		ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
-+		if (ret)
-+			dev_err(cpu_dev,
-+				"%s: failed to mark OPPs as shared: %d\n",
-+				__func__, ret);
-+	}
-+
-+	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
-+	if (ret) {
-+		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
-+		goto out_free_opp;
-+	}
-+
-+	priv->cpu_dev = cpu_dev;
-+
-+	policy->driver_data = priv;
-+	policy->clk = cpu_clk;
-+	policy->freq_table = freq_table;
-+
-+	policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
-+
-+	transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev);
-+	if (!transition_latency)
-+		transition_latency = CPUFREQ_ETERNAL;
-+
-+	policy->cpuinfo.transition_latency = transition_latency;
-+	policy->dvfs_possible_from_any_cpu = true;
-+
-+	dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
-+
-+	return 0;
-+
-+out_free_opp:
-+	if (priv->have_static_opps)
-+		dev_pm_opp_of_cpumask_remove_table(policy->cpus);
-+	kfree(priv);
-+out_put_regulator:
-+	if (name)
-+		dev_pm_opp_put_regulators(opp_table);
-+out_put_clk:
-+	clk_put(cpu_clk);
-+
-+	return ret;
-+}
-+
-+static int cpufreq_online(struct cpufreq_policy *policy)
-+{
-+	/* We did light-weight tear down earlier, nothing to do here */
-+	return 0;
-+}
-+
-+static int cpufreq_offline(struct cpufreq_policy *policy)
-+{
-+	/*
-+	 * Preserve policy->driver_data and don't free resources on light-weight
-+	 * tear down.
-+	 */
-+	return 0;
-+}
-+
-+static int cpufreq_exit(struct cpufreq_policy *policy)
-+{
-+	struct private_data *priv = policy->driver_data;
-+
-+	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
-+	if (priv->have_static_opps)
-+		dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
-+	if (priv->reg_name)
-+		dev_pm_opp_put_regulators(priv->opp_table);
-+
-+	clk_put(policy->clk);
-+	kfree(priv);
-+
-+	return 0;
-+}
-+
-+static struct freq_attr *krait_cpufreq_attr[] = {
-+	&cpufreq_freq_attr_scaling_available_freqs,
-+	NULL,
-+};
-+
-+static struct cpufreq_driver krait_cpufreq_driver = {
-+	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
-+		 CPUFREQ_IS_COOLING_DEV,
-+	.verify = cpufreq_generic_frequency_table_verify,
-+	.target_index = set_target,
-+	.get = cpufreq_generic_get,
-+	.init = cpufreq_init,
-+	.exit = cpufreq_exit,
-+	.online = cpufreq_online,
-+	.offline = cpufreq_offline,
-+	.name = "krait-cpufreq",
-+	.attr = krait_cpufreq_attr,
-+	.suspend = cpufreq_generic_suspend,
-+};
-+
-+struct krait_data {
-+	unsigned long idle_freq;
-+	bool regulator_enabled;
-+};
-+
-+static int krait_cache_set_opp(struct dev_pm_set_opp_data *data)
-+{
-+	unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate;
-+	struct dev_pm_opp_supply *supply = &data->new_opp.supplies[0];
-+	struct regulator *reg = data->regulators[0];
-+	struct clk *clk = data->clk;
-+	struct krait_data *kdata;
-+	unsigned long idle_freq;
-+	int ret;
-+
-+	kdata = (struct krait_data *)dev_get_drvdata(data->dev);
-+	idle_freq = kdata->idle_freq;
-+
-+	/* Scaling up? Scale voltage before frequency */
-+	if (freq >= old_freq) {
-+		ret = regulator_set_voltage_triplet(reg, supply->u_volt_min,
-+						    supply->u_volt,
-+						    supply->u_volt_max);
-+		if (ret)
-+			goto exit;
-+	}
-+
-+	/*
-+	 * Set to idle bin if switching from normal to high bin
-+	 * or vice versa. It has been notice that a bug is triggered
-+	 * in cache scaling when more than one bin is scaled, to fix
-+	 * this we first need to transition to the base rate and then
-+	 * to target rate
-+	 */
-+	if (likely(freq != idle_freq && old_freq != idle_freq)) {
-+		ret = clk_set_rate(clk, idle_freq);
-+		if (ret)
-+			goto exit;
-+	}
-+
-+	ret = clk_set_rate(clk, freq);
-+	if (ret)
-+		goto exit;
-+
-+	/* Scaling down? Scale voltage after frequency */
-+	if (freq < old_freq) {
-+		ret = regulator_set_voltage_triplet(reg, supply->u_volt_min,
-+						    supply->u_volt,
-+						    supply->u_volt_max);
-+	}
-+
-+	if (unlikely(!kdata->regulator_enabled)) {
-+		ret = regulator_enable(reg);
-+		if (ret < 0)
-+			dev_warn(data->dev, "Failed to enable regulator: %d", ret);
-+		else
-+			kdata->regulator_enabled = true;
-+	}
-+
-+exit:
-+	return ret;
-+};
-+
-+static int krait_cache_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct krait_data *data;
-+	struct opp_table *table;
-+	struct dev_pm_opp *opp;
-+	struct device *cpu_dev;
-+	int ret;
-+
-+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
-+	if (!data)
-+		return -ENOMEM;
-+
-+	table = dev_pm_opp_set_regulators(dev, (const char *[]){ "l2" }, 1);
-+	if (IS_ERR(table)) {
-+		ret = PTR_ERR(table);
-+		if (ret != -EPROBE_DEFER)
-+			dev_err(dev, "failed to set regulators %d\n", ret);
-+
-+		return ret;
-+	}
-+
-+	ret = PTR_ERR_OR_ZERO(
-+		dev_pm_opp_register_set_opp_helper(dev, krait_cache_set_opp));
-+	if (ret)
-+		return ret;
-+
-+	ret = dev_pm_opp_of_add_table(dev);
-+	if (ret) {
-+		dev_err(dev, "failed to parse L2 freq thresholds\n");
-+		return ret;
-+	}
-+
-+	opp = dev_pm_opp_find_freq_ceil(dev, &data->idle_freq);
-+	dev_pm_opp_put(opp);
-+
-+	/*
-+	 * Check opp-level configuration
-+	 * At least 2 level must be set or the cache will always be scaled
-+	 * the idle freq causing some performance problem
-+	 *
-+	 * In case of invalid configuration, the l2 scaling is skipped
-+	 */
-+	cpu_dev = get_cpu_device(0);
-+	if (!cpu_dev) {
-+		pr_err("failed to get cpu0 device\n");
-+		return -ENODEV;
-+	}
-+
-+	/*
-+	 * Check if we have at least opp-level 1, 0 should always be set to
-+	 * the idle freq
-+	 */
-+	opp = dev_pm_opp_find_level_exact(dev, 1);
-+	if (IS_ERR(opp)) {
-+		dev_err(dev,
-+			"Invalid configuration found of l2 opp. Can't find opp-level 1");
-+		goto invalid_conf;
-+	}
-+	dev_pm_opp_put(opp);
-+
-+	/*
-+	 * Check if we have at least opp-level 1 in the cpu opp, 0 should always
-+	 * be set to the idle freq
-+	 */
-+	opp = dev_pm_opp_find_level_exact(cpu_dev, 1);
-+	if (IS_ERR(opp)) {
-+		dev_err(dev,
-+			"Invalid configuration found of cpu opp. Can't find opp-level 1");
-+		goto invalid_conf;
-+	}
-+	dev_pm_opp_put(opp);
-+
-+	platform_set_drvdata(pdev, data);
-+
-+	/* The l2 scaling is enabled by linking the cpufreq driver */
-+	l2_pdev = pdev;
-+
-+	return 0;
-+
-+invalid_conf:
-+	dev_pm_opp_remove_table(dev);
-+	dev_pm_opp_put_regulators(table);
-+	dev_pm_opp_unregister_set_opp_helper(table);
-+
-+	return -EINVAL;
-+};
-+
-+static int krait_cache_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct opp_table *table = dev_pm_opp_get_opp_table(dev);
-+
-+	dev_pm_opp_remove_table(dev);
-+	dev_pm_opp_put_regulators(table);
-+	dev_pm_opp_unregister_set_opp_helper(table);
-+
-+	return 0;
-+};
-+
-+static const struct of_device_id krait_cache_match_table[] = {
-+	{ .compatible = "qcom,krait-cache" },
-+	{}
-+};
-+
-+static struct platform_driver krait_cache_driver = {
-+	.driver = {
-+		.name	= "krait-cache",
-+		.of_match_table = krait_cache_match_table,
-+	},
-+	.probe		= krait_cache_probe,
-+	.remove		= krait_cache_remove,
-+};
-+module_platform_driver(krait_cache_driver);
-+
-+static int krait_cpufreq_probe(struct platform_device *pdev)
-+{
-+	struct cpufreq_dt_platform_data *data = dev_get_platdata(&pdev->dev);
-+	int ret;
-+
-+	/*
-+	 * All per-cluster (CPUs sharing clock/voltages) initialization is done
-+	 * from ->init(). In probe(), we just need to make sure that clk and
-+	 * regulators are available. Else defer probe and retry.
-+	 *
-+	 * FIXME: Is checking this only for CPU0 sufficient ?
-+	 */
-+	ret = resources_available();
-+	if (ret)
-+		return ret;
-+
-+	if (data) {
-+		if (data->have_governor_per_policy)
-+			krait_cpufreq_driver.flags |=
-+				CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
-+
-+		krait_cpufreq_driver.resume = data->resume;
-+		if (data->suspend)
-+			krait_cpufreq_driver.suspend = data->suspend;
-+	}
-+
-+	ret = cpufreq_register_driver(&krait_cpufreq_driver);
-+	if (ret)
-+		dev_err(&pdev->dev, "failed register driver: %d\n", ret);
-+
-+	return ret;
-+}
-+
-+static int krait_cpufreq_remove(struct platform_device *pdev)
-+{
-+	cpufreq_unregister_driver(&krait_cpufreq_driver);
-+	return 0;
-+}
-+
-+static struct platform_driver krait_cpufreq_platdrv = {
-+	.driver = {
-+		.name	= "krait-cpufreq",
-+	},
-+	.probe		= krait_cpufreq_probe,
-+	.remove		= krait_cpufreq_remove,
-+};
-+module_platform_driver(krait_cpufreq_platdrv);
-+
-+MODULE_ALIAS("platform:krait-cpufreq");
-+MODULE_AUTHOR("Ansuel Smith <ansuelsmth@gmail.com>");
-+MODULE_DESCRIPTION("Dedicated Krait SoC cpufreq driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ipq806x/patches-5.10/098-2-Documentation-cpufreq-add-qcom-krait-cpufreq-binding.patch b/target/linux/ipq806x/patches-5.10/098-2-Documentation-cpufreq-add-qcom-krait-cpufreq-binding.patch
deleted file mode 100644
index 316e18b79061..000000000000
--- a/target/linux/ipq806x/patches-5.10/098-2-Documentation-cpufreq-add-qcom-krait-cpufreq-binding.patch
+++ /dev/null
@@ -1,237 +0,0 @@
-From c9ecd920324a647bf1f2b47f771c8f599cc7b551 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sat, 22 Feb 2020 18:02:17 +0100
-Subject: [PATCH 2/8] Documentation: cpufreq: add qcom,krait-cache bindings
-
-Document dedicated cpufreq for Krait CPUs.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- .../bindings/cpufreq/qcom-cpufreq-krait.yaml  | 221 ++++++++++++++++++
- 1 file changed, 221 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-krait.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-krait.yaml
-@@ -0,0 +1,221 @@
-+# SPDX-License-Identifier: GPL-2.0
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-krait.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: CPU Frequency scaling driver for Krait SoCs
-+
-+maintainers:
-+  - Ansuel Smith <ansuelsmth@gmail.com>
-+
-+description: |
-+  The krait cpufreq driver is a dedicated frequency scaling driver
-+  based on cpufreq-dt generic driver that scale L2 cache and the
-+  cores. TEST
-+
-+  The L2 cache is scaled based on the max clk across all cores and
-+  the clock is decided based on the opp-level set in the device tree.
-+
-+  Different core freq can be linked to a specific l2 freq and the driver
-+  on frequency change will scale the core and the l2 clk based of the 
-+  linked freq.
-+
-+  On Krait SoC is present a bug and on every L2 clk change the driver
-+  needs to set the clk to the idle freq before changing it to the new value.
-+
-+  This requires the qcom cpufreq nvmem driver to parse the different opp
-+  core clk and an additional opp table for the l2 scaling.
-+
-+  If the driver detect broken config (for example missing opp-level) the
-+  cpufreq driver skips the l2 scaling
-+
-+  Referring to this example opp-level can be used to link a range of cpu freq
-+  to a specific l2 freq:
-+    cpu opp freq 384000000 has opp-level 0
-+    l2 opp freq 384000000 has opp-level 0
-+    The driver will scale l2 to 384000000
-+
-+    cpu opp freq 600000000-1000000000 has opp-level 1
-+    l2 opp freq 1000000000 has opp-level 1
-+    The driver will scale l2 to 1000000000
-+
-+allOf:
-+  - $ref: /schemas/cache-controller.yaml#
-+
-+select:
-+  properties:
-+    compatible:
-+      items:
-+        - enum:
-+            - qcom,krait-cache
-+
-+  required:
-+    - compatible
-+
-+properties:
-+  compatible:
-+    items:
-+      - const: qcom,krait-cache
-+      - const: cache
-+
-+  cache-level:
-+    const: 2
-+
-+  clocks:
-+    maxItems: 1
-+
-+  clock-names:
-+    const: l2
-+
-+  l2-supply: true
-+
-+  operating-points-v2: true
-+
-+required:
-+  - compatible
-+  - cache-level
-+  - clocks
-+  - clock-names
-+  - l2-supply
-+  - operating-points-v2
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    cpus {
-+      #address-cells = <1>;
-+      #size-cells = <0>;
-+
-+      cpu0: cpu@0 {
-+        compatible = "qcom,krait";
-+        enable-method = "qcom,kpss-acc-v1";
-+        device_type = "cpu";
-+        reg = <0>;
-+        next-level-cache = <&L2>;
-+        qcom,acc = <&acc0>;
-+        qcom,saw = <&saw0>;
-+        clocks = <&kraitcc 0>, <&kraitcc 4>;
-+        clock-names = "cpu", "l2";
-+        clock-latency = <100000>;
-+        cpu-supply = <&smb208_s2a>;
-+        operating-points-v2 = <&opp_table0>;
-+        voltage-tolerance = <5>;
-+        cooling-min-state = <0>;
-+        cooling-max-state = <10>;
-+        #cooling-cells = <2>;
-+        cpu-idle-states = <&CPU_SPC>;
-+      };
-+
-+      /* ... */
-+
-+    };
-+
-+    opp_table0: opp_table0 {
-+      compatible = "operating-points-v2-kryo-cpu";
-+      nvmem-cells = <&speedbin_efuse>;
-+
-+      opp-384000000 {
-+        opp-hz = /bits/ 64 <384000000>;
-+        opp-microvolt-speed0-pvs0-v0 = <1000000>;
-+        opp-microvolt-speed0-pvs1-v0 = <925000>;
-+        opp-microvolt-speed0-pvs2-v0 = <875000>;
-+        opp-microvolt-speed0-pvs3-v0 = <800000>;
-+        opp-supported-hw = <0x1>;
-+        clock-latency-ns = <100000>;
-+        opp-level = <0>;
-+      };
-+
-+      opp-600000000 {
-+        opp-hz = /bits/ 64 <600000000>;
-+        opp-microvolt-speed0-pvs0-v0 = <1050000>;
-+        opp-microvolt-speed0-pvs1-v0 = <975000>;
-+        opp-microvolt-speed0-pvs2-v0 = <925000>;
-+        opp-microvolt-speed0-pvs3-v0 = <850000>;
-+        opp-supported-hw = <0x1>;
-+        clock-latency-ns = <100000>;
-+        opp-level = <1>;
-+      };
-+
-+      opp-800000000 {
-+        opp-hz = /bits/ 64 <800000000>;
-+        opp-microvolt-speed0-pvs0-v0 = <1100000>;
-+        opp-microvolt-speed0-pvs1-v0 = <1025000>;
-+        opp-microvolt-speed0-pvs2-v0 = <995000>;
-+        opp-microvolt-speed0-pvs3-v0 = <900000>;
-+        opp-supported-hw = <0x1>;
-+        clock-latency-ns = <100000>;
-+        opp-level = <1>;
-+      };
-+
-+      opp-1000000000 {
-+        opp-hz = /bits/ 64 <1000000000>;
-+        opp-microvolt-speed0-pvs0-v0 = <1150000>;
-+        opp-microvolt-speed0-pvs1-v0 = <1075000>;
-+        opp-microvolt-speed0-pvs2-v0 = <1025000>;
-+        opp-microvolt-speed0-pvs3-v0 = <950000>;
-+        opp-supported-hw = <0x1>;
-+        clock-latency-ns = <100000>;
-+        opp-level = <1>;
-+      };
-+
-+      opp-1200000000 {
-+        opp-hz = /bits/ 64 <1200000000>;
-+        opp-microvolt-speed0-pvs0-v0 = <1200000>;
-+        opp-microvolt-speed0-pvs1-v0 = <1125000>;
-+        opp-microvolt-speed0-pvs2-v0 = <1075000>;
-+        opp-microvolt-speed0-pvs3-v0 = <1000000>;
-+        opp-supported-hw = <0x1>;
-+        clock-latency-ns = <100000>;
-+        opp-level = <2>;
-+      };
-+
-+      opp-1400000000 {
-+        opp-hz = /bits/ 64 <1400000000>;
-+        opp-microvolt-speed0-pvs0-v0 = <1250000>;
-+        opp-microvolt-speed0-pvs1-v0 = <1175000>;
-+        opp-microvolt-speed0-pvs2-v0 = <1125000>;
-+        opp-microvolt-speed0-pvs3-v0 = <1050000>;
-+        opp-supported-hw = <0x1>;
-+        clock-latency-ns = <100000>;
-+        opp-level = <2>;
-+      };
-+    };
-+
-+    opp_table_l2: opp_table_l2 {
-+      compatible = "operating-points-v2";
-+
-+      opp-384000000 {
-+        opp-hz = /bits/ 64 <384000000>;
-+        opp-microvolt = <1100000>;
-+        clock-latency-ns = <100000>;
-+        opp-level = <0>;
-+      };
-+      opp-1000000000 {
-+        opp-hz = /bits/ 64 <1000000000>;
-+        opp-microvolt = <1100000>;
-+        clock-latency-ns = <100000>;
-+        opp-level = <1>;
-+      };
-+      opp-1200000000 {
-+        opp-hz = /bits/ 64 <1200000000>;
-+        opp-microvolt = <1150000>;
-+        clock-latency-ns = <100000>;
-+        opp-level = <2>;
-+      };
-+    };
-+
-+    soc {
-+      L2: l2-cache {
-+        compatible = "qcom,krait-cache", "cache";
-+        cache-level = <2>;
-+
-+        clocks = <&kraitcc 4>;
-+        clock-names = "l2";
-+        l2-supply = <&smb208_s1a>;
-+        operating-points-v2 = <&opp_table_l2>;
-+      };
-+    };
-+
-+...
diff --git a/target/linux/ipq806x/patches-5.10/098-3-add-fab-scaling-support-with-cpufreq.patch b/target/linux/ipq806x/patches-5.10/098-3-add-fab-scaling-support-with-cpufreq.patch
deleted file mode 100644
index 8ce3f062cff6..000000000000
--- a/target/linux/ipq806x/patches-5.10/098-3-add-fab-scaling-support-with-cpufreq.patch
+++ /dev/null
@@ -1,243 +0,0 @@
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -15,6 +15,7 @@ clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-k
- clk-qcom-y += clk-hfpll.o
- clk-qcom-y += reset.o
- clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
-+clk-qcom-y += fab_scaling.o
- 
- # Keep alphabetically sorted by config
- obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
---- /dev/null
-+++ b/drivers/clk/qcom/fab_scaling.c
-@@ -0,0 +1,172 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/slab.h>
-+#include <linux/fab_scaling.h>
-+
-+struct qcom_fab_scaling_data {
-+	u32 fab_freq_high;
-+	u32 fab_freq_nominal;
-+	u32 cpu_freq_threshold;
-+	struct clk *apps_fab_clk;
-+	struct clk *ddr_fab_clk;
-+};
-+
-+static struct qcom_fab_scaling_data *drv_data;
-+
-+int scale_fabrics(unsigned long max_cpu_freq)
-+{	
-+	struct clk *apps_fab_clk = drv_data->apps_fab_clk,
-+	           *ddr_fab_clk = drv_data->ddr_fab_clk;
-+	unsigned long target_freq, cur_freq;
-+	int ret;
-+
-+	/* Skip fab scaling if the driver is not ready */
-+	if (!apps_fab_clk || !ddr_fab_clk)
-+		return 0;
-+
-+	if (max_cpu_freq > drv_data->cpu_freq_threshold)
-+		target_freq = drv_data->fab_freq_high;
-+	else
-+		target_freq = drv_data->fab_freq_nominal;
-+
-+	cur_freq = clk_get_rate(ddr_fab_clk);
-+
-+	if (target_freq != cur_freq) {
-+		ret = clk_set_rate(apps_fab_clk, target_freq);
-+		if (ret)
-+			return ret;
-+		ret = clk_set_rate(ddr_fab_clk, target_freq);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(scale_fabrics);
-+
-+static int ipq806x_fab_scaling_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct clk *apps_fab_clk, *ddr_fab_clk;
-+	int ret;
-+
-+	if (!np)
-+		return -ENODEV;
-+	
-+	drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL);
-+	if (!drv_data)
-+		return -ENOMEM;
-+
-+	if (of_property_read_u32(np, "fab_freq_high", &drv_data->fab_freq_high)) {
-+		pr_err("FABRICS turbo freq not found. Using defaults...\n");
-+		drv_data->fab_freq_high = 533000000;
-+	}
-+
-+	if (of_property_read_u32(np, "fab_freq_nominal", &drv_data->fab_freq_nominal)) {
-+		pr_err("FABRICS nominal freq not found. Using defaults...\n");
-+		drv_data->fab_freq_nominal = 400000000;
-+	}
-+
-+	if (of_property_read_u32(np, "cpu_freq_threshold", &drv_data->cpu_freq_threshold)) {
-+		pr_err("FABRICS cpu freq threshold not found. Using defaults...\n");
-+		drv_data->cpu_freq_threshold = 1000000000;
-+	}
-+
-+	apps_fab_clk = devm_clk_get(&pdev->dev, "apps-fab-clk");
-+	ret = PTR_ERR_OR_ZERO(apps_fab_clk);
-+	if (ret) {
-+		/*
-+		 * If apps fab clk node is present, but clock is not yet
-+		 * registered, we should try defering probe.
-+		 */
-+		if (ret != -EPROBE_DEFER) {
-+			pr_err("Failed to get APPS FABRIC clock: %d\n", ret);
-+			ret = -ENODEV;
-+		}
-+		goto err;
-+	}
-+
-+	clk_prepare_enable(apps_fab_clk);
-+	clk_set_rate(apps_fab_clk, drv_data->fab_freq_high);
-+	drv_data->apps_fab_clk = apps_fab_clk;
-+
-+	ddr_fab_clk = devm_clk_get(&pdev->dev, "ddr-fab-clk");
-+	ret = PTR_ERR_OR_ZERO(ddr_fab_clk);
-+	if (ret) {
-+		/*
-+		 * If ddr fab clk node is present, but clock is not yet
-+		 * registered, we should try defering probe.
-+		 */
-+		if (ret != -EPROBE_DEFER) {
-+			pr_err("Failed to get DDR FABRIC clock: %d\n", ret);
-+			ddr_fab_clk = NULL;
-+			ret = -ENODEV;
-+		}
-+		goto err;
-+	}
-+
-+	clk_prepare_enable(ddr_fab_clk);
-+	clk_set_rate(ddr_fab_clk, drv_data->fab_freq_high);
-+	drv_data->ddr_fab_clk = ddr_fab_clk;
-+
-+	return 0;
-+err:
-+	kfree(drv_data);
-+	return ret;
-+}
-+
-+static int ipq806x_fab_scaling_remove(struct platform_device *pdev)
-+{
-+	kfree(drv_data);
-+	return 0;
-+}
-+
-+static const struct of_device_id fab_scaling_ipq806x_match_table[] = {
-+	{ .compatible = "qcom,fab-scaling" },
-+	{ }
-+};
-+
-+static struct platform_driver fab_scaling_ipq806x_driver = {
-+	.probe		= ipq806x_fab_scaling_probe,
-+	.remove		= ipq806x_fab_scaling_remove,
-+	.driver		= {
-+		.name   = "fab-scaling",
-+		.of_match_table = fab_scaling_ipq806x_match_table,
-+	},
-+};
-+
-+static int __init fab_scaling_ipq806x_init(void)
-+{
-+	return platform_driver_register(&fab_scaling_ipq806x_driver);
-+}
-+late_initcall(fab_scaling_ipq806x_init);
-+
-+static void __exit fab_scaling_ipq806x_exit(void)
-+{
-+	platform_driver_unregister(&fab_scaling_ipq806x_driver);
-+}
-+module_exit(fab_scaling_ipq806x_exit);
---- /dev/null
-+++ b/include/linux/fab_scaling.h
-@@ -0,0 +1,31 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+
-+#ifndef __FAB_SCALING_H
-+#define __FAB_SCALING_H
-+
-+/**
-+ * scale_fabrics - Scale DDR and APPS FABRICS
-+ *
-+ * This function monitors all the registered clocks and does APPS
-+ * and DDR FABRIC scaling based on the idle frequencies with which
-+ * it was registered.
-+ *
-+ */
-+int scale_fabrics(unsigned long max_cpu_freq);
-+
-+#endif
---- a/drivers/cpufreq/qcom-cpufreq-krait.c
-+++ b/drivers/cpufreq/qcom-cpufreq-krait.c
-@@ -15,6 +15,7 @@
- #include <linux/regulator/consumer.h>
- #include <linux/slab.h>
- #include <linux/thermal.h>
-+#include <linux/fab_scaling.h>
- 
- #include "cpufreq-dt.h"
- 
-@@ -68,6 +69,13 @@ static int set_target(struct cpufreq_pol
- 			return -EINVAL;
- 		}
- 
-+		/*
-+		 * Scale fabrics with max freq across all cores
-+		 */
-+		ret = scale_fabrics(target_freq);
-+		if (ret)
-+			return ret;
-+
- 		opp = dev_pm_opp_find_level_exact(&l2_pdev->dev, level);
- 		if (IS_ERR(opp)) {
- 			dev_err(&l2_pdev->dev,
diff --git a/target/linux/ipq806x/patches-5.10/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch b/target/linux/ipq806x/patches-5.10/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch
deleted file mode 100644
index 37501bc64b33..000000000000
--- a/target/linux/ipq806x/patches-5.10/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch
+++ /dev/null
@@ -1,239 +0,0 @@
-From 6949d651e3be3ebbfedb6bbd5b541cfda6ee58a9 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Wed, 10 Feb 2021 10:40:17 +0100
-Subject: [PATCH 1/2] mtd: nand: raw: qcom_nandc: add boot_layout_mode support
-
-ipq806x nand have a special ecc configuration for the boot pages. The
-use of the non-boot pages configuration on boot pages cause I/O error
-and can cause broken data written to the nand. Add support for this
-special configuration if the page to be read/write is in the size of the
-boot pages set by the dts.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/mtd/nand/raw/qcom_nandc.c | 82 +++++++++++++++++++++++++++++--
- 1 file changed, 77 insertions(+), 5 deletions(-)
-
---- a/drivers/mtd/nand/raw/qcom_nandc.c
-+++ b/drivers/mtd/nand/raw/qcom_nandc.c
-@@ -158,6 +158,11 @@
- /* NAND_CTRL bits */
- #define	BAM_MODE_EN			BIT(0)
- 
-+
-+#define UD_SIZE_BYTES_MASK	(0x3ff << UD_SIZE_BYTES)
-+#define SPARE_SIZE_BYTES_MASK	(0xf << SPARE_SIZE_BYTES)
-+#define ECC_NUM_DATA_BYTES_MASK	(0x3ff << ECC_NUM_DATA_BYTES)
-+
- /*
-  * the NAND controller performs reads/writes with ECC in 516 byte chunks.
-  * the driver calls the chunks 'step' or 'codeword' interchangeably
-@@ -429,6 +434,13 @@ struct qcom_nand_controller {
-  * @cfg0, cfg1, cfg0_raw..:	NANDc register configurations needed for
-  *				ecc/non-ecc mode for the current nand flash
-  *				device
-+ *
-+ * @boot_pages_conf:		keep track of the current ecc configuration used by
-+ * 				the driver for read/write operation. (boot pages
-+ * 				have different configuration than normal page)
-+ * @boot_pages:			number of pages starting from 0 used as boot pages
-+ * 				where the driver will use the boot pages ecc
-+ * 				configuration for read/write operation
-  */
- struct qcom_nand_host {
- 	struct nand_chip chip;
-@@ -451,6 +463,9 @@ struct qcom_nand_host {
- 	u32 ecc_bch_cfg;
- 	u32 clrflashstatus;
- 	u32 clrreadstatus;
-+
-+	bool boot_pages_conf;
-+	u32 boot_pages;
- };
- 
- /*
-@@ -459,12 +474,14 @@ struct qcom_nand_host {
-  * @ecc_modes - ecc mode for NAND
-  * @is_bam - whether NAND controller is using BAM
-  * @is_qpic - whether NAND CTRL is part of qpic IP
-+ * @has_boot_pages - whether NAND has different ecc settings for boot pages
-  * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
-  */
- struct qcom_nandc_props {
- 	u32 ecc_modes;
- 	bool is_bam;
- 	bool is_qpic;
-+	bool has_boot_pages;
- 	u32 dev_cmd_reg_start;
- };
- 
-@@ -1603,7 +1620,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *
- 	data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
- 	oob_size1 = host->bbm_size;
- 
--	if (cw == (ecc->steps - 1)) {
-+	if (cw == (ecc->steps - 1) && !host->boot_pages_conf) {
- 		data_size2 = ecc->size - data_size1 -
- 			     ((ecc->steps - 1) * 4);
- 		oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw +
-@@ -1684,7 +1701,7 @@ check_for_erased_page(struct qcom_nand_h
- 	}
- 
- 	for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
--		if (cw == (ecc->steps - 1)) {
-+		if (cw == (ecc->steps - 1) && !host->boot_pages_conf) {
- 			data_size = ecc->size - ((ecc->steps - 1) * 4);
- 			oob_size = (ecc->steps * 4) + host->ecc_bytes_hw;
- 		} else {
-@@ -1843,7 +1860,7 @@ static int read_page_ecc(struct qcom_nan
- 	for (i = 0; i < ecc->steps; i++) {
- 		int data_size, oob_size;
- 
--		if (i == (ecc->steps - 1)) {
-+		if (i == (ecc->steps - 1) && !host->boot_pages_conf) {
- 			data_size = ecc->size - ((ecc->steps - 1) << 2);
- 			oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
- 				   host->spare_bytes;
-@@ -1940,6 +1957,30 @@ static int copy_last_cw(struct qcom_nand
- 	return ret;
- }
- 
-+static void
-+check_boot_pages_conf(struct qcom_nand_host *host, int page)
-+{
-+	bool boot_pages_conf = page < host->boot_pages;
-+
-+	/* Skip conf write if we are already in the correct mode */
-+	if (boot_pages_conf != host->boot_pages_conf) {
-+		host->boot_pages_conf = boot_pages_conf;
-+
-+		host->cw_data = boot_pages_conf ? 512 : 516;
-+		host->spare_bytes = host->cw_size - host->ecc_bytes_hw -
-+				    host->bbm_size - host->cw_data;
-+
-+		host->cfg0 &= ~(SPARE_SIZE_BYTES_MASK | UD_SIZE_BYTES_MASK);
-+		host->cfg0 |= host->spare_bytes << SPARE_SIZE_BYTES |
-+			      host->cw_data << UD_SIZE_BYTES;
-+
-+		host->ecc_bch_cfg &= ~ECC_NUM_DATA_BYTES_MASK;
-+		host->ecc_bch_cfg |= host->cw_data << ECC_NUM_DATA_BYTES;
-+		host->ecc_buf_cfg = (boot_pages_conf ? 0x1ff : 0x203) <<
-+				     NUM_STEPS;
-+	}
-+}
-+
- /* implements ecc->read_page() */
- static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf,
- 				int oob_required, int page)
-@@ -1948,6 +1989,9 @@ static int qcom_nandc_read_page(struct n
- 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
- 	u8 *data_buf, *oob_buf = NULL;
- 
-+	if (host->boot_pages)
-+		check_boot_pages_conf(host, page);
-+
- 	nand_read_page_op(chip, page, 0, NULL, 0);
- 	data_buf = buf;
- 	oob_buf = oob_required ? chip->oob_poi : NULL;
-@@ -1967,6 +2011,9 @@ static int qcom_nandc_read_page_raw(stru
- 	int cw, ret;
- 	u8 *data_buf = buf, *oob_buf = chip->oob_poi;
- 
-+	if (host->boot_pages)
-+		check_boot_pages_conf(host, page);
-+
- 	for (cw = 0; cw < ecc->steps; cw++) {
- 		ret = qcom_nandc_read_cw_raw(mtd, chip, data_buf, oob_buf,
- 					     page, cw);
-@@ -1987,6 +2034,9 @@ static int qcom_nandc_read_oob(struct na
- 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
- 	struct nand_ecc_ctrl *ecc = &chip->ecc;
- 
-+	if (host->boot_pages)
-+		check_boot_pages_conf(host, page);
-+
- 	clear_read_regs(nandc);
- 	clear_bam_transaction(nandc);
- 
-@@ -2007,6 +2057,9 @@ static int qcom_nandc_write_page(struct
- 	u8 *data_buf, *oob_buf;
- 	int i, ret;
- 
-+	if (host->boot_pages)
-+		check_boot_pages_conf(host, page);
-+
- 	nand_prog_page_begin_op(chip, page, 0, NULL, 0);
- 
- 	clear_read_regs(nandc);
-@@ -2022,7 +2075,7 @@ static int qcom_nandc_write_page(struct
- 	for (i = 0; i < ecc->steps; i++) {
- 		int data_size, oob_size;
- 
--		if (i == (ecc->steps - 1)) {
-+		if (i == (ecc->steps - 1) && !host->boot_pages_conf) {
- 			data_size = ecc->size - ((ecc->steps - 1) << 2);
- 			oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
- 				   host->spare_bytes;
-@@ -2079,6 +2132,9 @@ static int qcom_nandc_write_page_raw(str
- 	u8 *data_buf, *oob_buf;
- 	int i, ret;
- 
-+	if (host->boot_pages)
-+		check_boot_pages_conf(host, page);
-+
- 	nand_prog_page_begin_op(chip, page, 0, NULL, 0);
- 	clear_read_regs(nandc);
- 	clear_bam_transaction(nandc);
-@@ -2097,7 +2153,7 @@ static int qcom_nandc_write_page_raw(str
- 		data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
- 		oob_size1 = host->bbm_size;
- 
--		if (i == (ecc->steps - 1)) {
-+		if (i == (ecc->steps - 1) && !host->boot_pages_conf) {
- 			data_size2 = ecc->size - data_size1 -
- 				     ((ecc->steps - 1) << 2);
- 			oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
-@@ -2157,6 +2213,9 @@ static int qcom_nandc_write_oob(struct n
- 	int data_size, oob_size;
- 	int ret;
- 
-+	if (host->boot_pages)
-+		check_boot_pages_conf(host, page);
-+
- 	host->use_ecc = true;
- 	clear_bam_transaction(nandc);
- 
-@@ -2805,6 +2864,7 @@ static int qcom_nand_host_init_and_regis
- 	struct nand_chip *chip = &host->chip;
- 	struct mtd_info *mtd = nand_to_mtd(chip);
- 	struct device *dev = nandc->dev;
-+	u32 boot_pages_size;
- 	int ret;
- 
- 	ret = of_property_read_u32(dn, "reg", &host->cs);
-@@ -2865,6 +2925,17 @@ static int qcom_nand_host_init_and_regis
- 	if (ret)
- 		nand_cleanup(chip);
- 
-+	if (nandc->props->has_boot_pages &&
-+	    of_property_read_bool(dn, "nand-is-boot-medium")) {
-+		ret = of_property_read_u32(dn, "qcom,boot_pages_size",
-+					   &boot_pages_size);
-+		if (ret)
-+			dev_warn(dev, "can't get boot pages size");
-+		else
-+			/* Convert size to nand pages */
-+			host->boot_pages = boot_pages_size / mtd->writesize;
-+	}
-+
- 	return ret;
- }
- 
-@@ -3030,6 +3101,7 @@ static int qcom_nandc_remove(struct plat
- static const struct qcom_nandc_props ipq806x_nandc_props = {
- 	.ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT),
- 	.is_bam = false,
-+	.has_boot_pages = true,
- 	.dev_cmd_reg_start = 0x0,
- };
- 
diff --git a/target/linux/ipq806x/patches-5.10/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch b/target/linux/ipq806x/patches-5.10/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch
deleted file mode 100644
index 79036cb057ac..000000000000
--- a/target/linux/ipq806x/patches-5.10/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 6fb003a7a117f97a35b078ba726c84adeae29c4c Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Wed, 10 Feb 2021 10:54:19 +0100
-Subject: [PATCH 2/2] Documentation: devicetree: mtd: qcom_nandc: document
- qcom,boot_layout_size binding
-
-Document new qcom,boot_layout_size binding used to apply special
-read/write confituation to boots partitions.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- Documentation/devicetree/bindings/mtd/qcom_nandc.txt | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
-+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
-@@ -52,6 +52,15 @@ Optional properties:
- 			be used according to chip requirement and available
- 			OOB size.
- 
-+EBI2 specific properties:
-+- nand-is-boot-medium:	nand contains boot partitions and different ecc configuration
-+			should be used for these partitions.
-+- qcom,boot_pages_size:	should contain the size of the total boot partitions
-+			where the boot layout read/write specific configuration
-+			should be used. The boot layout is considered from the
-+			start of the nand to the value set in this binding.
-+			Only used in combination with 'nand-is-boot-medium'.
-+
- Each nandcs device node may optionally contain a 'partitions' sub-node, which
- further contains sub-nodes describing the flash partition mapping. See
- partition.txt for more detail.
-@@ -80,6 +89,9 @@ nand-controller@1ac00000 {
- 		nand-ecc-strength = <4>;
- 		nand-bus-width = <8>;
- 
-+		nand-is-boot-medium;
-+		qcom,boot_pages_size: <0x58a0000>;
-+
- 		partitions {
- 			compatible = "fixed-partitions";
- 			#address-cells = <1>;
diff --git a/target/linux/ipq806x/patches-5.10/100-v5.11-dmaengine-qcom-add_ADM_driver.patch b/target/linux/ipq806x/patches-5.10/100-v5.11-dmaengine-qcom-add_ADM_driver.patch
deleted file mode 100644
index 2d24da01e44d..000000000000
--- a/target/linux/ipq806x/patches-5.10/100-v5.11-dmaengine-qcom-add_ADM_driver.patch
+++ /dev/null
@@ -1,965 +0,0 @@
-From 5c9f8c2dbdbe53818bcde6aa6695e1331e5f841f Mon Sep 17 00:00:00 2001
-From: Jonathan McDowell <noodles@earth.li>
-Date: Sat, 14 Nov 2020 14:02:33 +0000
-Subject: dmaengine: qcom: Add ADM driver
-
-Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
-controller found in the MSM8x60 and IPQ/APQ8064 platforms.
-
-The ADM supports both memory to memory transactions and memory
-to/from peripheral device transactions.  The controller also provides
-flow control capabilities for transactions to/from peripheral devices.
-
-The initial release of this driver supports slave transfers to/from
-peripherals and also incorporates CRCI (client rate control interface)
-flow control.
-
-The hardware only supports a 32 bit physical address, so specifying
-!PHYS_ADDR_T_64BIT gives maximum COMPILE_TEST coverage without having to
-spend effort on kludging things in the code that will never actually be
-needed on real hardware.
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
-Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
-Signed-off-by: Jonathan McDowell <noodles@earth.li>
-Link: https://lore.kernel.org/r/20201114140233.GM32650@earth.li
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/dma/qcom/Kconfig    |  11 +
- drivers/dma/qcom/Makefile   |   1 +
- drivers/dma/qcom/qcom_adm.c | 903 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 915 insertions(+)
- create mode 100644 drivers/dma/qcom/qcom_adm.c
-
---- a/drivers/dma/qcom/Kconfig
-+++ b/drivers/dma/qcom/Kconfig
-@@ -1,4 +1,15 @@
- # SPDX-License-Identifier: GPL-2.0-only
-+config QCOM_ADM
-+	tristate "Qualcomm ADM support"
-+	depends on (ARCH_QCOM || COMPILE_TEST) && !PHYS_ADDR_T_64BIT
-+	select DMA_ENGINE
-+	select DMA_VIRTUAL_CHANNELS
-+	help
-+	  Enable support for the Qualcomm Application Data Mover (ADM) DMA
-+	  controller, as present on MSM8x60, APQ8064, and IPQ8064 devices.
-+	  This controller provides DMA capabilities for both general purpose
-+	  and on-chip peripheral devices.
-+
- config QCOM_BAM_DMA
- 	tristate "QCOM BAM DMA support"
- 	depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
---- a/drivers/dma/qcom/Makefile
-+++ b/drivers/dma/qcom/Makefile
-@@ -1,4 +1,5 @@
- # SPDX-License-Identifier: GPL-2.0
-+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
- obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
- obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
- hdma_mgmt-objs	 := hidma_mgmt.o hidma_mgmt_sys.o
---- /dev/null
-+++ b/drivers/dma/qcom/qcom_adm.c
-@@ -0,0 +1,903 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/dmaengine.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_dma.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+#include <linux/scatterlist.h>
-+#include <linux/slab.h>
-+
-+#include "../dmaengine.h"
-+#include "../virt-dma.h"
-+
-+/* ADM registers - calculated from channel number and security domain */
-+#define ADM_CHAN_MULTI			0x4
-+#define ADM_CI_MULTI			0x4
-+#define ADM_CRCI_MULTI			0x4
-+#define ADM_EE_MULTI			0x800
-+#define ADM_CHAN_OFFS(chan)		(ADM_CHAN_MULTI * (chan))
-+#define ADM_EE_OFFS(ee)			(ADM_EE_MULTI * (ee))
-+#define ADM_CHAN_EE_OFFS(chan, ee)	(ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
-+#define ADM_CHAN_OFFS(chan)		(ADM_CHAN_MULTI * (chan))
-+#define ADM_CI_OFFS(ci)			(ADM_CHAN_OFF(ci))
-+#define ADM_CH_CMD_PTR(chan, ee)	(ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_CH_RSLT(chan, ee)		(0x40 + ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_CH_FLUSH_STATE0(chan, ee)	(0x80 + ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_CH_STATUS_SD(chan, ee)	(0x200 + ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_CH_CONF(chan)		(0x240 + ADM_CHAN_OFFS(chan))
-+#define ADM_CH_RSLT_CONF(chan, ee)	(0x300 + ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee)	(0x380 + ADM_EE_OFFS(ee))
-+#define ADM_CI_CONF(ci)			(0x390 + (ci) * ADM_CI_MULTI)
-+#define ADM_GP_CTL			0x3d8
-+#define ADM_CRCI_CTL(crci, ee)		(0x400 + (crci) * ADM_CRCI_MULTI + \
-+						ADM_EE_OFFS(ee))
-+
-+/* channel status */
-+#define ADM_CH_STATUS_VALID		BIT(1)
-+
-+/* channel result */
-+#define ADM_CH_RSLT_VALID		BIT(31)
-+#define ADM_CH_RSLT_ERR			BIT(3)
-+#define ADM_CH_RSLT_FLUSH		BIT(2)
-+#define ADM_CH_RSLT_TPD			BIT(1)
-+
-+/* channel conf */
-+#define ADM_CH_CONF_SHADOW_EN		BIT(12)
-+#define ADM_CH_CONF_MPU_DISABLE		BIT(11)
-+#define ADM_CH_CONF_PERM_MPU_CONF	BIT(9)
-+#define ADM_CH_CONF_FORCE_RSLT_EN	BIT(7)
-+#define ADM_CH_CONF_SEC_DOMAIN(ee)	((((ee) & 0x3) << 4) | (((ee) & 0x4) << 11))
-+
-+/* channel result conf */
-+#define ADM_CH_RSLT_CONF_FLUSH_EN	BIT(1)
-+#define ADM_CH_RSLT_CONF_IRQ_EN		BIT(0)
-+
-+/* CRCI CTL */
-+#define ADM_CRCI_CTL_MUX_SEL		BIT(18)
-+#define ADM_CRCI_CTL_RST		BIT(17)
-+
-+/* CI configuration */
-+#define ADM_CI_RANGE_END(x)		((x) << 24)
-+#define ADM_CI_RANGE_START(x)		((x) << 16)
-+#define ADM_CI_BURST_4_WORDS		BIT(2)
-+#define ADM_CI_BURST_8_WORDS		BIT(3)
-+
-+/* GP CTL */
-+#define ADM_GP_CTL_LP_EN		BIT(12)
-+#define ADM_GP_CTL_LP_CNT(x)		((x) << 8)
-+
-+/* Command pointer list entry */
-+#define ADM_CPLE_LP			BIT(31)
-+#define ADM_CPLE_CMD_PTR_LIST		BIT(29)
-+
-+/* Command list entry */
-+#define ADM_CMD_LC			BIT(31)
-+#define ADM_CMD_DST_CRCI(n)		(((n) & 0xf) << 7)
-+#define ADM_CMD_SRC_CRCI(n)		(((n) & 0xf) << 3)
-+
-+#define ADM_CMD_TYPE_SINGLE		0x0
-+#define ADM_CMD_TYPE_BOX		0x3
-+
-+#define ADM_CRCI_MUX_SEL		BIT(4)
-+#define ADM_DESC_ALIGN			8
-+#define ADM_MAX_XFER			(SZ_64K - 1)
-+#define ADM_MAX_ROWS			(SZ_64K - 1)
-+#define ADM_MAX_CHANNELS		16
-+
-+struct adm_desc_hw_box {
-+	u32 cmd;
-+	u32 src_addr;
-+	u32 dst_addr;
-+	u32 row_len;
-+	u32 num_rows;
-+	u32 row_offset;
-+};
-+
-+struct adm_desc_hw_single {
-+	u32 cmd;
-+	u32 src_addr;
-+	u32 dst_addr;
-+	u32 len;
-+};
-+
-+struct adm_async_desc {
-+	struct virt_dma_desc vd;
-+	struct adm_device *adev;
-+
-+	size_t length;
-+	enum dma_transfer_direction dir;
-+	dma_addr_t dma_addr;
-+	size_t dma_len;
-+
-+	void *cpl;
-+	dma_addr_t cp_addr;
-+	u32 crci;
-+	u32 mux;
-+	u32 blk_size;
-+};
-+
-+struct adm_chan {
-+	struct virt_dma_chan vc;
-+	struct adm_device *adev;
-+
-+	/* parsed from DT */
-+	u32 id;			/* channel id */
-+
-+	struct adm_async_desc *curr_txd;
-+	struct dma_slave_config slave;
-+	struct list_head node;
-+
-+	int error;
-+	int initialized;
-+};
-+
-+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
-+{
-+	return container_of(common, struct adm_chan, vc.chan);
-+}
-+
-+struct adm_device {
-+	void __iomem *regs;
-+	struct device *dev;
-+	struct dma_device common;
-+	struct device_dma_parameters dma_parms;
-+	struct adm_chan *channels;
-+
-+	u32 ee;
-+
-+	struct clk *core_clk;
-+	struct clk *iface_clk;
-+
-+	struct reset_control *clk_reset;
-+	struct reset_control *c0_reset;
-+	struct reset_control *c1_reset;
-+	struct reset_control *c2_reset;
-+	int irq;
-+};
-+
-+/**
-+ * adm_free_chan - Frees dma resources associated with the specific channel
-+ *
-+ * Free all allocated descriptors associated with this channel
-+ *
-+ */
-+static void adm_free_chan(struct dma_chan *chan)
-+{
-+	/* free all queued descriptors */
-+	vchan_free_chan_resources(to_virt_chan(chan));
-+}
-+
-+/**
-+ * adm_get_blksize - Get block size from burst value
-+ *
-+ */
-+static int adm_get_blksize(unsigned int burst)
-+{
-+	int ret;
-+
-+	switch (burst) {
-+	case 16:
-+	case 32:
-+	case 64:
-+	case 128:
-+		ret = ffs(burst >> 4) - 1;
-+		break;
-+	case 192:
-+		ret = 4;
-+		break;
-+	case 256:
-+		ret = 5;
-+		break;
-+	default:
-+		ret = -EINVAL;
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+/**
-+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
-+ *
-+ * @achan: ADM channel
-+ * @desc: Descriptor memory pointer
-+ * @sg: Scatterlist entry
-+ * @crci: CRCI value
-+ * @burst: Burst size of transaction
-+ * @direction: DMA transfer direction
-+ */
-+static void *adm_process_fc_descriptors(struct adm_chan *achan, void *desc,
-+					struct scatterlist *sg, u32 crci,
-+					u32 burst,
-+					enum dma_transfer_direction direction)
-+{
-+	struct adm_desc_hw_box *box_desc = NULL;
-+	struct adm_desc_hw_single *single_desc;
-+	u32 remainder = sg_dma_len(sg);
-+	u32 rows, row_offset, crci_cmd;
-+	u32 mem_addr = sg_dma_address(sg);
-+	u32 *incr_addr = &mem_addr;
-+	u32 *src, *dst;
-+
-+	if (direction == DMA_DEV_TO_MEM) {
-+		crci_cmd = ADM_CMD_SRC_CRCI(crci);
-+		row_offset = burst;
-+		src = &achan->slave.src_addr;
-+		dst = &mem_addr;
-+	} else {
-+		crci_cmd = ADM_CMD_DST_CRCI(crci);
-+		row_offset = burst << 16;
-+		src = &mem_addr;
-+		dst = &achan->slave.dst_addr;
-+	}
-+
-+	while (remainder >= burst) {
-+		box_desc = desc;
-+		box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
-+		box_desc->row_offset = row_offset;
-+		box_desc->src_addr = *src;
-+		box_desc->dst_addr = *dst;
-+
-+		rows = remainder / burst;
-+		rows = min_t(u32, rows, ADM_MAX_ROWS);
-+		box_desc->num_rows = rows << 16 | rows;
-+		box_desc->row_len = burst << 16 | burst;
-+
-+		*incr_addr += burst * rows;
-+		remainder -= burst * rows;
-+		desc += sizeof(*box_desc);
-+	}
-+
-+	/* if leftover bytes, do one single descriptor */
-+	if (remainder) {
-+		single_desc = desc;
-+		single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
-+		single_desc->len = remainder;
-+		single_desc->src_addr = *src;
-+		single_desc->dst_addr = *dst;
-+		desc += sizeof(*single_desc);
-+
-+		if (sg_is_last(sg))
-+			single_desc->cmd |= ADM_CMD_LC;
-+	} else {
-+		if (box_desc && sg_is_last(sg))
-+			box_desc->cmd |= ADM_CMD_LC;
-+	}
-+
-+	return desc;
-+}
-+
-+/**
-+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
-+ *
-+ * @achan: ADM channel
-+ * @desc: Descriptor memory pointer
-+ * @sg: Scatterlist entry
-+ * @direction: DMA transfer direction
-+ */
-+static void *adm_process_non_fc_descriptors(struct adm_chan *achan, void *desc,
-+					    struct scatterlist *sg,
-+					    enum dma_transfer_direction direction)
-+{
-+	struct adm_desc_hw_single *single_desc;
-+	u32 remainder = sg_dma_len(sg);
-+	u32 mem_addr = sg_dma_address(sg);
-+	u32 *incr_addr = &mem_addr;
-+	u32 *src, *dst;
-+
-+	if (direction == DMA_DEV_TO_MEM) {
-+		src = &achan->slave.src_addr;
-+		dst = &mem_addr;
-+	} else {
-+		src = &mem_addr;
-+		dst = &achan->slave.dst_addr;
-+	}
-+
-+	do {
-+		single_desc = desc;
-+		single_desc->cmd = ADM_CMD_TYPE_SINGLE;
-+		single_desc->src_addr = *src;
-+		single_desc->dst_addr = *dst;
-+		single_desc->len = (remainder > ADM_MAX_XFER) ?
-+				ADM_MAX_XFER : remainder;
-+
-+		remainder -= single_desc->len;
-+		*incr_addr += single_desc->len;
-+		desc += sizeof(*single_desc);
-+	} while (remainder);
-+
-+	/* set last command if this is the end of the whole transaction */
-+	if (sg_is_last(sg))
-+		single_desc->cmd |= ADM_CMD_LC;
-+
-+	return desc;
-+}
-+
-+/**
-+ * adm_prep_slave_sg - Prep slave sg transaction
-+ *
-+ * @chan: dma channel
-+ * @sgl: scatter gather list
-+ * @sg_len: length of sg
-+ * @direction: DMA transfer direction
-+ * @flags: DMA flags
-+ * @context: transfer context (unused)
-+ */
-+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
-+							 struct scatterlist *sgl,
-+							 unsigned int sg_len,
-+							 enum dma_transfer_direction direction,
-+							 unsigned long flags,
-+							 void *context)
-+{
-+	struct adm_chan *achan = to_adm_chan(chan);
-+	struct adm_device *adev = achan->adev;
-+	struct adm_async_desc *async_desc;
-+	struct scatterlist *sg;
-+	dma_addr_t cple_addr;
-+	u32 i, burst;
-+	u32 single_count = 0, box_count = 0, crci = 0;
-+	void *desc;
-+	u32 *cple;
-+	int blk_size = 0;
-+
-+	if (!is_slave_direction(direction)) {
-+		dev_err(adev->dev, "invalid dma direction\n");
-+		return NULL;
-+	}
-+
-+	/*
-+	 * get burst value from slave configuration
-+	 */
-+	burst = (direction == DMA_MEM_TO_DEV) ?
-+		achan->slave.dst_maxburst :
-+		achan->slave.src_maxburst;
-+
-+	/* if using flow control, validate burst and crci values */
-+	if (achan->slave.device_fc) {
-+		blk_size = adm_get_blksize(burst);
-+		if (blk_size < 0) {
-+			dev_err(adev->dev, "invalid burst value: %d\n",
-+				burst);
-+			return ERR_PTR(-EINVAL);
-+		}
-+
-+		crci = achan->slave.slave_id & 0xf;
-+		if (!crci || achan->slave.slave_id > 0x1f) {
-+			dev_err(adev->dev, "invalid crci value\n");
-+			return ERR_PTR(-EINVAL);
-+		}
-+	}
-+
-+	/* iterate through sgs and compute allocation size of structures */
-+	for_each_sg(sgl, sg, sg_len, i) {
-+		if (achan->slave.device_fc) {
-+			box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
-+						  ADM_MAX_ROWS);
-+			if (sg_dma_len(sg) % burst)
-+				single_count++;
-+		} else {
-+			single_count += DIV_ROUND_UP(sg_dma_len(sg),
-+						     ADM_MAX_XFER);
-+		}
-+	}
-+
-+	async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);
-+	if (!async_desc)
-+		return ERR_PTR(-ENOMEM);
-+
-+	if (crci)
-+		async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
-+					ADM_CRCI_CTL_MUX_SEL : 0;
-+	async_desc->crci = crci;
-+	async_desc->blk_size = blk_size;
-+	async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
-+				box_count * sizeof(struct adm_desc_hw_box) +
-+				sizeof(*cple) + 2 * ADM_DESC_ALIGN;
-+
-+	async_desc->cpl = kzalloc(async_desc->dma_len, GFP_NOWAIT);
-+	if (!async_desc->cpl)
-+		goto free;
-+
-+	async_desc->adev = adev;
-+
-+	/* both command list entry and descriptors must be 8 byte aligned */
-+	cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
-+	desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
-+
-+	for_each_sg(sgl, sg, sg_len, i) {
-+		async_desc->length += sg_dma_len(sg);
-+
-+		if (achan->slave.device_fc)
-+			desc = adm_process_fc_descriptors(achan, desc, sg, crci,
-+							  burst, direction);
-+		else
-+			desc = adm_process_non_fc_descriptors(achan, desc, sg,
-+							      direction);
-+	}
-+
-+	async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl,
-+					      async_desc->dma_len,
-+					      DMA_TO_DEVICE);
-+	if (dma_mapping_error(adev->dev, async_desc->dma_addr))
-+		goto free;
-+
-+	cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl);
-+
-+	/* init cmd list */
-+	dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple),
-+				DMA_TO_DEVICE);
-+	*cple = ADM_CPLE_LP;
-+	*cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3;
-+	dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple),
-+				   DMA_TO_DEVICE);
-+
-+	return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
-+
-+free:
-+	kfree(async_desc);
-+	return ERR_PTR(-ENOMEM);
-+}
-+
-+/**
-+ * adm_terminate_all - terminate all transactions on a channel
-+ * @achan: adm dma channel
-+ *
-+ * Dequeues and frees all transactions, aborts current transaction
-+ * No callbacks are done
-+ *
-+ */
-+static int adm_terminate_all(struct dma_chan *chan)
-+{
-+	struct adm_chan *achan = to_adm_chan(chan);
-+	struct adm_device *adev = achan->adev;
-+	unsigned long flags;
-+	LIST_HEAD(head);
-+
-+	spin_lock_irqsave(&achan->vc.lock, flags);
-+	vchan_get_all_descriptors(&achan->vc, &head);
-+
-+	/* send flush command to terminate current transaction */
-+	writel_relaxed(0x0,
-+		       adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
-+
-+	spin_unlock_irqrestore(&achan->vc.lock, flags);
-+
-+	vchan_dma_desc_free_list(&achan->vc, &head);
-+
-+	return 0;
-+}
-+
-+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
-+{
-+	struct adm_chan *achan = to_adm_chan(chan);
-+	unsigned long flag;
-+
-+	spin_lock_irqsave(&achan->vc.lock, flag);
-+	memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
-+	spin_unlock_irqrestore(&achan->vc.lock, flag);
-+
-+	return 0;
-+}
-+
-+/**
-+ * adm_start_dma - start next transaction
-+ * @achan - ADM dma channel
-+ */
-+static void adm_start_dma(struct adm_chan *achan)
-+{
-+	struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
-+	struct adm_device *adev = achan->adev;
-+	struct adm_async_desc *async_desc;
-+
-+	lockdep_assert_held(&achan->vc.lock);
-+
-+	if (!vd)
-+		return;
-+
-+	list_del(&vd->node);
-+
-+	/* write next command list out to the CMD FIFO */
-+	async_desc = container_of(vd, struct adm_async_desc, vd);
-+	achan->curr_txd = async_desc;
-+
-+	/* reset channel error */
-+	achan->error = 0;
-+
-+	if (!achan->initialized) {
-+		/* enable interrupts */
-+		writel(ADM_CH_CONF_SHADOW_EN |
-+		       ADM_CH_CONF_PERM_MPU_CONF |
-+		       ADM_CH_CONF_MPU_DISABLE |
-+		       ADM_CH_CONF_SEC_DOMAIN(adev->ee),
-+		       adev->regs + ADM_CH_CONF(achan->id));
-+
-+		writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
-+		       adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
-+
-+		achan->initialized = 1;
-+	}
-+
-+	/* set the crci block size if this transaction requires CRCI */
-+	if (async_desc->crci) {
-+		writel(async_desc->mux | async_desc->blk_size,
-+		       adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
-+	}
-+
-+	/* make sure IRQ enable doesn't get reordered */
-+	wmb();
-+
-+	/* write next command list out to the CMD FIFO */
-+	writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
-+	       adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
-+}
-+
-+/**
-+ * adm_dma_irq - irq handler for ADM controller
-+ * @irq: IRQ of interrupt
-+ * @data: callback data
-+ *
-+ * IRQ handler for the bam controller
-+ */
-+static irqreturn_t adm_dma_irq(int irq, void *data)
-+{
-+	struct adm_device *adev = data;
-+	u32 srcs, i;
-+	struct adm_async_desc *async_desc;
-+	unsigned long flags;
-+
-+	srcs = readl_relaxed(adev->regs +
-+			ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
-+
-+	for (i = 0; i < ADM_MAX_CHANNELS; i++) {
-+		struct adm_chan *achan = &adev->channels[i];
-+		u32 status, result;
-+
-+		if (srcs & BIT(i)) {
-+			status = readl_relaxed(adev->regs +
-+					       ADM_CH_STATUS_SD(i, adev->ee));
-+
-+			/* if no result present, skip */
-+			if (!(status & ADM_CH_STATUS_VALID))
-+				continue;
-+
-+			result = readl_relaxed(adev->regs +
-+				ADM_CH_RSLT(i, adev->ee));
-+
-+			/* no valid results, skip */
-+			if (!(result & ADM_CH_RSLT_VALID))
-+				continue;
-+
-+			/* flag error if transaction was flushed or failed */
-+			if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
-+				achan->error = 1;
-+
-+			spin_lock_irqsave(&achan->vc.lock, flags);
-+			async_desc = achan->curr_txd;
-+
-+			achan->curr_txd = NULL;
-+
-+			if (async_desc) {
-+				vchan_cookie_complete(&async_desc->vd);
-+
-+				/* kick off next DMA */
-+				adm_start_dma(achan);
-+			}
-+
-+			spin_unlock_irqrestore(&achan->vc.lock, flags);
-+		}
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/**
-+ * adm_tx_status - returns status of transaction
-+ * @chan: dma channel
-+ * @cookie: transaction cookie
-+ * @txstate: DMA transaction state
-+ *
-+ * Return status of dma transaction
-+ */
-+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
-+				     struct dma_tx_state *txstate)
-+{
-+	struct adm_chan *achan = to_adm_chan(chan);
-+	struct virt_dma_desc *vd;
-+	enum dma_status ret;
-+	unsigned long flags;
-+	size_t residue = 0;
-+
-+	ret = dma_cookie_status(chan, cookie, txstate);
-+	if (ret == DMA_COMPLETE || !txstate)
-+		return ret;
-+
-+	spin_lock_irqsave(&achan->vc.lock, flags);
-+
-+	vd = vchan_find_desc(&achan->vc, cookie);
-+	if (vd)
-+		residue = container_of(vd, struct adm_async_desc, vd)->length;
-+
-+	spin_unlock_irqrestore(&achan->vc.lock, flags);
-+
-+	/*
-+	 * residue is either the full length if it is in the issued list, or 0
-+	 * if it is in progress.  We have no reliable way of determining
-+	 * anything inbetween
-+	 */
-+	dma_set_residue(txstate, residue);
-+
-+	if (achan->error)
-+		return DMA_ERROR;
-+
-+	return ret;
-+}
-+
-+/**
-+ * adm_issue_pending - starts pending transactions
-+ * @chan: dma channel
-+ *
-+ * Issues all pending transactions and starts DMA
-+ */
-+static void adm_issue_pending(struct dma_chan *chan)
-+{
-+	struct adm_chan *achan = to_adm_chan(chan);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&achan->vc.lock, flags);
-+
-+	if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
-+		adm_start_dma(achan);
-+	spin_unlock_irqrestore(&achan->vc.lock, flags);
-+}
-+
-+/**
-+ * adm_dma_free_desc - free descriptor memory
-+ * @vd: virtual descriptor
-+ *
-+ */
-+static void adm_dma_free_desc(struct virt_dma_desc *vd)
-+{
-+	struct adm_async_desc *async_desc = container_of(vd,
-+			struct adm_async_desc, vd);
-+
-+	dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr,
-+			 async_desc->dma_len, DMA_TO_DEVICE);
-+	kfree(async_desc->cpl);
-+	kfree(async_desc);
-+}
-+
-+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
-+			     u32 index)
-+{
-+	achan->id = index;
-+	achan->adev = adev;
-+
-+	vchan_init(&achan->vc, &adev->common);
-+	achan->vc.desc_free = adm_dma_free_desc;
-+}
-+
-+static int adm_dma_probe(struct platform_device *pdev)
-+{
-+	struct adm_device *adev;
-+	int ret;
-+	u32 i;
-+
-+	adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
-+	if (!adev)
-+		return -ENOMEM;
-+
-+	adev->dev = &pdev->dev;
-+
-+	adev->regs = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(adev->regs))
-+		return PTR_ERR(adev->regs);
-+
-+	adev->irq = platform_get_irq(pdev, 0);
-+	if (adev->irq < 0)
-+		return adev->irq;
-+
-+	ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
-+	if (ret) {
-+		dev_err(adev->dev, "Execution environment unspecified\n");
-+		return ret;
-+	}
-+
-+	adev->core_clk = devm_clk_get(adev->dev, "core");
-+	if (IS_ERR(adev->core_clk))
-+		return PTR_ERR(adev->core_clk);
-+
-+	adev->iface_clk = devm_clk_get(adev->dev, "iface");
-+	if (IS_ERR(adev->iface_clk))
-+		return PTR_ERR(adev->iface_clk);
-+
-+	adev->clk_reset = devm_reset_control_get_exclusive(&pdev->dev, "clk");
-+	if (IS_ERR(adev->clk_reset)) {
-+		dev_err(adev->dev, "failed to get ADM0 reset\n");
-+		return PTR_ERR(adev->clk_reset);
-+	}
-+
-+	adev->c0_reset = devm_reset_control_get_exclusive(&pdev->dev, "c0");
-+	if (IS_ERR(adev->c0_reset)) {
-+		dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
-+		return PTR_ERR(adev->c0_reset);
-+	}
-+
-+	adev->c1_reset = devm_reset_control_get_exclusive(&pdev->dev, "c1");
-+	if (IS_ERR(adev->c1_reset)) {
-+		dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
-+		return PTR_ERR(adev->c1_reset);
-+	}
-+
-+	adev->c2_reset = devm_reset_control_get_exclusive(&pdev->dev, "c2");
-+	if (IS_ERR(adev->c2_reset)) {
-+		dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
-+		return PTR_ERR(adev->c2_reset);
-+	}
-+
-+	ret = clk_prepare_enable(adev->core_clk);
-+	if (ret) {
-+		dev_err(adev->dev, "failed to prepare/enable core clock\n");
-+		return ret;
-+	}
-+
-+	ret = clk_prepare_enable(adev->iface_clk);
-+	if (ret) {
-+		dev_err(adev->dev, "failed to prepare/enable iface clock\n");
-+		goto err_disable_core_clk;
-+	}
-+
-+	reset_control_assert(adev->clk_reset);
-+	reset_control_assert(adev->c0_reset);
-+	reset_control_assert(adev->c1_reset);
-+	reset_control_assert(adev->c2_reset);
-+
-+	udelay(2);
-+
-+	reset_control_deassert(adev->clk_reset);
-+	reset_control_deassert(adev->c0_reset);
-+	reset_control_deassert(adev->c1_reset);
-+	reset_control_deassert(adev->c2_reset);
-+
-+	adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
-+				      sizeof(*adev->channels), GFP_KERNEL);
-+
-+	if (!adev->channels) {
-+		ret = -ENOMEM;
-+		goto err_disable_clks;
-+	}
-+
-+	/* allocate and initialize channels */
-+	INIT_LIST_HEAD(&adev->common.channels);
-+
-+	for (i = 0; i < ADM_MAX_CHANNELS; i++)
-+		adm_channel_init(adev, &adev->channels[i], i);
-+
-+	/* reset CRCIs */
-+	for (i = 0; i < 16; i++)
-+		writel(ADM_CRCI_CTL_RST, adev->regs +
-+			ADM_CRCI_CTL(i, adev->ee));
-+
-+	/* configure client interfaces */
-+	writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
-+	       ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
-+	writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
-+	       ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
-+	writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
-+	       ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
-+	writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
-+	       adev->regs + ADM_GP_CTL);
-+
-+	ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
-+			       0, "adm_dma", adev);
-+	if (ret)
-+		goto err_disable_clks;
-+
-+	platform_set_drvdata(pdev, adev);
-+
-+	adev->common.dev = adev->dev;
-+	adev->common.dev->dma_parms = &adev->dma_parms;
-+
-+	/* set capabilities */
-+	dma_cap_zero(adev->common.cap_mask);
-+	dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
-+	dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
-+
-+	/* initialize dmaengine apis */
-+	adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
-+	adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
-+	adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+	adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+	adev->common.device_free_chan_resources = adm_free_chan;
-+	adev->common.device_prep_slave_sg = adm_prep_slave_sg;
-+	adev->common.device_issue_pending = adm_issue_pending;
-+	adev->common.device_tx_status = adm_tx_status;
-+	adev->common.device_terminate_all = adm_terminate_all;
-+	adev->common.device_config = adm_slave_config;
-+
-+	ret = dma_async_device_register(&adev->common);
-+	if (ret) {
-+		dev_err(adev->dev, "failed to register dma async device\n");
-+		goto err_disable_clks;
-+	}
-+
-+	ret = of_dma_controller_register(pdev->dev.of_node,
-+					 of_dma_xlate_by_chan_id,
-+					 &adev->common);
-+	if (ret)
-+		goto err_unregister_dma;
-+
-+	return 0;
-+
-+err_unregister_dma:
-+	dma_async_device_unregister(&adev->common);
-+err_disable_clks:
-+	clk_disable_unprepare(adev->iface_clk);
-+err_disable_core_clk:
-+	clk_disable_unprepare(adev->core_clk);
-+
-+	return ret;
-+}
-+
-+static int adm_dma_remove(struct platform_device *pdev)
-+{
-+	struct adm_device *adev = platform_get_drvdata(pdev);
-+	struct adm_chan *achan;
-+	u32 i;
-+
-+	of_dma_controller_free(pdev->dev.of_node);
-+	dma_async_device_unregister(&adev->common);
-+
-+	for (i = 0; i < ADM_MAX_CHANNELS; i++) {
-+		achan = &adev->channels[i];
-+
-+		/* mask IRQs for this channel/EE pair */
-+		writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
-+
-+		tasklet_kill(&adev->channels[i].vc.task);
-+		adm_terminate_all(&adev->channels[i].vc.chan);
-+	}
-+
-+	devm_free_irq(adev->dev, adev->irq, adev);
-+
-+	clk_disable_unprepare(adev->core_clk);
-+	clk_disable_unprepare(adev->iface_clk);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id adm_of_match[] = {
-+	{ .compatible = "qcom,adm", },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, adm_of_match);
-+
-+static struct platform_driver adm_dma_driver = {
-+	.probe = adm_dma_probe,
-+	.remove = adm_dma_remove,
-+	.driver = {
-+		.name = "adm-dma-engine",
-+		.of_match_table = adm_of_match,
-+	},
-+};
-+
-+module_platform_driver(adm_dma_driver);
-+
-+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
-+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ipq806x/patches-5.10/101-5.12-mtd-parsers-Add-Qcom-SMEM-parser.patch b/target/linux/ipq806x/patches-5.10/101-5.12-mtd-parsers-Add-Qcom-SMEM-parser.patch
deleted file mode 100644
index 13b7c137e0dc..000000000000
--- a/target/linux/ipq806x/patches-5.10/101-5.12-mtd-parsers-Add-Qcom-SMEM-parser.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From 803eb124e1a64e42888542c3444bfe6dac412c7f Mon Sep 17 00:00:00 2001
-From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-Date: Mon, 4 Jan 2021 09:41:35 +0530
-Subject: mtd: parsers: Add Qcom SMEM parser
-
-NAND based Qualcomm platforms have the partition table populated in the
-Shared Memory (SMEM). Hence, add a parser for parsing the partitions
-from it.
-
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20210104041137.113075-3-manivannan.sadhasivam@linaro.org
----
- drivers/mtd/parsers/Kconfig        |   8 ++
- drivers/mtd/parsers/Makefile       |   1 +
- drivers/mtd/parsers/qcomsmempart.c | 170 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 179 insertions(+)
- create mode 100644 drivers/mtd/parsers/qcomsmempart.c
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -220,6 +220,14 @@ config MTD_SERCOMM_PARTS
- 	  offsets, which may differ from device to device depending on the
- 	  number and location of bad blocks on NAND.
- 
-+config MTD_QCOMSMEM_PARTS
-+	tristate "Qualcomm SMEM NAND flash partition parser"
-+	depends on MTD_NAND_QCOM || COMPILE_TEST
-+	depends on QCOM_SMEM
-+	help
-+	  This provides support for parsing partitions from Shared Memory (SMEM)
-+	  for NAND flash on Qualcomm platforms.
-+
- config MTD_ROUTERBOOT_PARTS
- 	tristate "RouterBoot flash partition parser"
- 	depends on MTD && OF
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -15,4 +15,5 @@ obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_
- obj-$(CONFIG_MTD_SERCOMM_PARTS)		+= scpart.o
- obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS)		+= redboot.o
-+obj-$(CONFIG_MTD_QCOMSMEM_PARTS)	+= qcomsmempart.o
- obj-$(CONFIG_MTD_ROUTERBOOT_PARTS)		+= routerbootpart.o
---- /dev/null
-+++ b/drivers/mtd/parsers/qcomsmempart.c
-@@ -0,0 +1,170 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Qualcomm SMEM NAND flash partition parser
-+ *
-+ * Copyright (C) 2020, Linaro Ltd.
-+ */
-+
-+#include <linux/ctype.h>
-+#include <linux/module.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/slab.h>
-+#include <linux/soc/qcom/smem.h>
-+
-+#define SMEM_AARM_PARTITION_TABLE	9
-+#define SMEM_APPS			0
-+
-+#define SMEM_FLASH_PART_MAGIC1		0x55ee73aa
-+#define SMEM_FLASH_PART_MAGIC2		0xe35ebddb
-+#define SMEM_FLASH_PTABLE_V3		3
-+#define SMEM_FLASH_PTABLE_V4		4
-+#define SMEM_FLASH_PTABLE_MAX_PARTS_V3	16
-+#define SMEM_FLASH_PTABLE_MAX_PARTS_V4	48
-+#define SMEM_FLASH_PTABLE_HDR_LEN	(4 * sizeof(u32))
-+#define SMEM_FLASH_PTABLE_NAME_SIZE	16
-+
-+/**
-+ * struct smem_flash_pentry - SMEM Flash partition entry
-+ * @name: Name of the partition
-+ * @offset: Offset in blocks
-+ * @length: Length of the partition in blocks
-+ * @attr: Flags for this partition
-+ */
-+struct smem_flash_pentry {
-+	char name[SMEM_FLASH_PTABLE_NAME_SIZE];
-+	__le32 offset;
-+	__le32 length;
-+	u8 attr;
-+} __packed __aligned(4);
-+
-+/**
-+ * struct smem_flash_ptable - SMEM Flash partition table
-+ * @magic1: Partition table Magic 1
-+ * @magic2: Partition table Magic 2
-+ * @version: Partition table version
-+ * @numparts: Number of partitions in this ptable
-+ * @pentry: Flash partition entries belonging to this ptable
-+ */
-+struct smem_flash_ptable {
-+	__le32 magic1;
-+	__le32 magic2;
-+	__le32 version;
-+	__le32 numparts;
-+	struct smem_flash_pentry pentry[SMEM_FLASH_PTABLE_MAX_PARTS_V4];
-+} __packed __aligned(4);
-+
-+static int parse_qcomsmem_part(struct mtd_info *mtd,
-+			       const struct mtd_partition **pparts,
-+			       struct mtd_part_parser_data *data)
-+{
-+	struct smem_flash_pentry *pentry;
-+	struct smem_flash_ptable *ptable;
-+	size_t len = SMEM_FLASH_PTABLE_HDR_LEN;
-+	struct mtd_partition *parts;
-+	int ret, i, numparts;
-+	char *name, *c;
-+
-+	pr_debug("Parsing partition table info from SMEM\n");
-+	ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len);
-+	if (IS_ERR(ptable)) {
-+		pr_err("Error reading partition table header\n");
-+		return PTR_ERR(ptable);
-+	}
-+
-+	/* Verify ptable magic */
-+	if (le32_to_cpu(ptable->magic1) != SMEM_FLASH_PART_MAGIC1 ||
-+	    le32_to_cpu(ptable->magic2) != SMEM_FLASH_PART_MAGIC2) {
-+		pr_err("Partition table magic verification failed\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Ensure that # of partitions is less than the max we have allocated */
-+	numparts = le32_to_cpu(ptable->numparts);
-+	if (numparts > SMEM_FLASH_PTABLE_MAX_PARTS_V4) {
-+		pr_err("Partition numbers exceed the max limit\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Find out length of partition data based on table version */
-+	if (le32_to_cpu(ptable->version) <= SMEM_FLASH_PTABLE_V3) {
-+		len = SMEM_FLASH_PTABLE_HDR_LEN + SMEM_FLASH_PTABLE_MAX_PARTS_V3 *
-+			sizeof(struct smem_flash_pentry);
-+	} else if (le32_to_cpu(ptable->version) == SMEM_FLASH_PTABLE_V4) {
-+		len = SMEM_FLASH_PTABLE_HDR_LEN + SMEM_FLASH_PTABLE_MAX_PARTS_V4 *
-+			sizeof(struct smem_flash_pentry);
-+	} else {
-+		pr_err("Unknown ptable version (%d)", le32_to_cpu(ptable->version));
-+		return -EINVAL;
-+	}
-+
-+	/*
-+	 * Now that the partition table header has been parsed, verified
-+	 * and the length of the partition table calculated, read the
-+	 * complete partition table
-+	 */
-+	ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len);
-+	if (IS_ERR_OR_NULL(ptable)) {
-+		pr_err("Error reading partition table\n");
-+		return PTR_ERR(ptable);
-+	}
-+
-+	parts = kcalloc(numparts, sizeof(*parts), GFP_KERNEL);
-+	if (!parts)
-+		return -ENOMEM;
-+
-+	for (i = 0; i < numparts; i++) {
-+		pentry = &ptable->pentry[i];
-+		if (pentry->name[0] == '\0')
-+			continue;
-+
-+		name = kstrdup(pentry->name, GFP_KERNEL);
-+		if (!name) {
-+			ret = -ENOMEM;
-+			goto out_free_parts;
-+		}
-+
-+		/* Convert name to lower case */
-+		for (c = name; *c != '\0'; c++)
-+			*c = tolower(*c);
-+
-+		parts[i].name = name;
-+		parts[i].offset = le32_to_cpu(pentry->offset) * mtd->erasesize;
-+		parts[i].mask_flags = pentry->attr;
-+		parts[i].size = le32_to_cpu(pentry->length) * mtd->erasesize;
-+		pr_debug("%d: %s offs=0x%08x size=0x%08x attr:0x%08x\n",
-+			 i, pentry->name, le32_to_cpu(pentry->offset),
-+			 le32_to_cpu(pentry->length), pentry->attr);
-+	}
-+
-+	pr_debug("SMEM partition table found: ver: %d len: %d\n",
-+		 le32_to_cpu(ptable->version), numparts);
-+	*pparts = parts;
-+
-+	return numparts;
-+
-+out_free_parts:
-+	while (--i >= 0)
-+		kfree(parts[i].name);
-+	kfree(parts);
-+	*pparts = NULL;
-+
-+	return ret;
-+}
-+
-+static const struct of_device_id qcomsmem_of_match_table[] = {
-+	{ .compatible = "qcom,smem-part" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, qcomsmem_of_match_table);
-+
-+static struct mtd_part_parser mtd_parser_qcomsmem = {
-+	.parse_fn = parse_qcomsmem_part,
-+	.name = "qcomsmem",
-+	.of_match_table = qcomsmem_of_match_table,
-+};
-+module_mtd_part_parser(mtd_parser_qcomsmem);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
-+MODULE_DESCRIPTION("Qualcomm SMEM NAND flash partition parser");
diff --git a/target/linux/ipq806x/patches-5.10/101-dwmac-ipq806x-qsgmii-pcs-all-ch-ctl.patch b/target/linux/ipq806x/patches-5.10/101-dwmac-ipq806x-qsgmii-pcs-all-ch-ctl.patch
deleted file mode 100644
index 2210f4e24922..000000000000
--- a/target/linux/ipq806x/patches-5.10/101-dwmac-ipq806x-qsgmii-pcs-all-ch-ctl.patch
+++ /dev/null
@@ -1,83 +0,0 @@
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
-@@ -64,6 +64,17 @@
- #define NSS_COMMON_CLK_DIV_SGMII_100		4
- #define NSS_COMMON_CLK_DIV_SGMII_10		49
- 
-+#define QSGMII_PCS_ALL_CH_CTL			0x80
-+#define QSGMII_PCS_CH_SPEED_FORCE		0x2
-+#define QSGMII_PCS_CH_SPEED_10			0x0
-+#define QSGMII_PCS_CH_SPEED_100			0x4
-+#define QSGMII_PCS_CH_SPEED_1000		0x8
-+#define QSGMII_PCS_CH_SPEED_MASK		(QSGMII_PCS_CH_SPEED_FORCE | \
-+						 QSGMII_PCS_CH_SPEED_10 | \
-+						 QSGMII_PCS_CH_SPEED_100 | \
-+						 QSGMII_PCS_CH_SPEED_1000)
-+#define QSGMII_PCS_CH_SPEED_SHIFT(x)		(x * 4)
-+
- #define QSGMII_PCS_CAL_LCKDT_CTL		0x120
- #define QSGMII_PCS_CAL_LCKDT_CTL_RST		BIT(19)
- 
-@@ -242,6 +253,36 @@ static void ipq806x_gmac_fix_mac_speed(v
- 	ipq806x_gmac_set_speed(gmac, speed);
- }
- 
-+static int
-+ipq806x_gmac_get_qsgmii_pcs_speed_val(struct platform_device *pdev) {
-+	struct device_node *fixed_link_node;
-+	int rv;
-+	int fixed_link_speed;
-+
-+	if (!of_phy_is_fixed_link(pdev->dev.of_node))
-+		return 0;
-+
-+	fixed_link_node = of_get_child_by_name(pdev->dev.of_node, "fixed-link");
-+	if (!fixed_link_node)
-+		return -1;
-+
-+	rv = of_property_read_u32(fixed_link_node, "speed", &fixed_link_speed);
-+	of_node_put(fixed_link_node);
-+	if (rv)
-+		return -1;
-+
-+	switch (fixed_link_speed) {
-+	case SPEED_1000:
-+		return QSGMII_PCS_CH_SPEED_FORCE | QSGMII_PCS_CH_SPEED_1000;
-+	case SPEED_100:
-+		return QSGMII_PCS_CH_SPEED_FORCE | QSGMII_PCS_CH_SPEED_100;
-+	case SPEED_10:
-+		return QSGMII_PCS_CH_SPEED_FORCE | QSGMII_PCS_CH_SPEED_10;
-+	}
-+
-+	return -1;
-+}
-+
- static int ipq806x_gmac_probe(struct platform_device *pdev)
- {
- 	struct plat_stmmacenet_data *plat_dat;
-@@ -250,6 +291,7 @@ static int ipq806x_gmac_probe(struct pla
- 	struct ipq806x_gmac *gmac;
- 	int val;
- 	int err;
-+	int qsgmii_pcs_speed;
- 
- 	val = stmmac_get_platform_resources(pdev, &stmmac_res);
- 	if (val)
-@@ -339,6 +381,17 @@ static int ipq806x_gmac_probe(struct pla
- 			     0x1ul << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
- 			     0x2ul << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
- 			     0xCul << QSGMII_PHY_TX_DRV_AMP_OFFSET);
-+
-+		qsgmii_pcs_speed = ipq806x_gmac_get_qsgmii_pcs_speed_val(pdev);
-+		if (qsgmii_pcs_speed != -1) {
-+			regmap_update_bits(
-+			    gmac->qsgmii_csr,
-+			    QSGMII_PCS_ALL_CH_CTL,
-+			    QSGMII_PCS_CH_SPEED_MASK <<
-+				QSGMII_PCS_CH_SPEED_SHIFT(gmac->id),
-+			    qsgmii_pcs_speed <<
-+				QSGMII_PCS_CH_SPEED_SHIFT(gmac->id));
-+		}
- 	}
- 
- 	plat_dat->has_gmac = true;
diff --git a/target/linux/ipq806x/patches-5.10/102-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch b/target/linux/ipq806x/patches-5.10/102-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch
deleted file mode 100644
index e83872935f5d..000000000000
--- a/target/linux/ipq806x/patches-5.10/102-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 5001f2e1a325b68dbf225bd17f69a4d3d975cca5 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 9 Mar 2017 09:31:44 +0100
-Subject: [PATCH 61/69] mtd: "rootfs" conflicts with OpenWrt auto mounting
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/mtd/parsers/qcomsmempart.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/parsers/qcomsmempart.c
-+++ b/drivers/mtd/parsers/qcomsmempart.c
-@@ -132,6 +132,11 @@ static int parse_qcomsmem_part(struct mt
- 		parts[i].offset = le32_to_cpu(pentry->offset) * mtd->erasesize;
- 		parts[i].mask_flags = pentry->attr;
- 		parts[i].size = le32_to_cpu(pentry->length) * mtd->erasesize;
-+
-+		/* "rootfs" conflicts with OpenWrt auto mounting */
-+		if (mtd_type_is_nand(mtd) && !strcmp(name, "rootfs"))
-+			parts[i].name = "ubi";
-+
- 		pr_debug("%d: %s offs=0x%08x size=0x%08x attr:0x%08x\n",
- 			 i, pentry->name, le32_to_cpu(pentry->offset),
- 			 le32_to_cpu(pentry->length), pentry->attr);
diff --git a/target/linux/ipq806x/patches-5.10/103-ARM-dts-qcom-reduce-pci-IO-size-to-64K.patch b/target/linux/ipq806x/patches-5.10/103-ARM-dts-qcom-reduce-pci-IO-size-to-64K.patch
deleted file mode 100644
index 2a6d4007fa66..000000000000
--- a/target/linux/ipq806x/patches-5.10/103-ARM-dts-qcom-reduce-pci-IO-size-to-64K.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 84909e85881d67244240c9f40974ce12a51e3886 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Tue, 11 May 2021 23:09:45 +0200
-Subject: [PATCH] ARM: dts: qcom: reduce pci IO size to 64K
-
-The current value is probably a typo and is actually uncommon to find
-1MB IO space even on a x86 arch. Also with recent changes to the pci
-driver, pci1 and pci2 now fails to function as any connected device
-fails any reg read/write. Reduce this to 64K as it should be more than
-enough and 3 * 64K of total IO space doesn't exceed the IO_SPACE_LIMIT
-hardcoded for the ARM arch.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -1162,7 +1162,7 @@
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 
--			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000   /* downstream I/O */
-+			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000   /* downstream I/O */
- 				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
- 
- 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-@@ -1213,7 +1213,7 @@
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 
--			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000   /* downstream I/O */
-+			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000   /* downstream I/O */
- 				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
- 
- 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-@@ -1264,7 +1264,7 @@
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 
--			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000   /* downstream I/O */
-+			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000   /* downstream I/O */
- 				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
- 
- 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/target/linux/ipq806x/patches-5.10/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch b/target/linux/ipq806x/patches-5.10/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch
deleted file mode 100644
index 5f422c1dde7e..000000000000
--- a/target/linux/ipq806x/patches-5.10/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch
+++ /dev/null
@@ -1,285 +0,0 @@
-From 5c7d1181056feef0b58fb2f556f55e170ba5b479 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sat, 25 Jul 2020 19:14:59 +0200
-Subject: [PATCH 01/10] drivers: thermal: tsens: Add VER_0 tsens version
-
-VER_0 is used to describe device based on tsens version before v0.1.
-These device are devices based on msm8960 for example apq8064 or
-ipq806x.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
-Reported-by: kernel test robot <lkp@intel.com>
-Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
----
- drivers/thermal/qcom/tsens.c | 150 ++++++++++++++++++++++++++++-------
- drivers/thermal/qcom/tsens.h |   4 +-
- 2 files changed, 124 insertions(+), 30 deletions(-)
-
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -12,6 +12,7 @@
- #include <linux/of.h>
- #include <linux/of_address.h>
- #include <linux/of_platform.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/platform_device.h>
- #include <linux/pm.h>
- #include <linux/regmap.h>
-@@ -515,6 +516,15 @@ static irqreturn_t tsens_irq_thread(int
- 			dev_dbg(priv->dev, "[%u] %s: no violation:  %d\n",
- 				hw_id, __func__, temp);
- 		}
-+
-+		if (tsens_version(priv) < VER_0_1) {
-+			/* Constraint: There is only 1 interrupt control register for all
-+			 * 11 temperature sensor. So monitoring more than 1 sensor based
-+			 * on interrupts will yield inconsistent result. To overcome this
-+			 * issue we will monitor only sensor 0 which is the master sensor.
-+			 */
-+			break;
-+		}
- 	}
- 
- 	return IRQ_HANDLED;
-@@ -530,6 +540,13 @@ static int tsens_set_trips(void *_sensor
- 	int high_val, low_val, cl_high, cl_low;
- 	u32 hw_id = s->hw_id;
- 
-+	if (tsens_version(priv) < VER_0_1) {
-+		/* Pre v0.1 IP had a single register for each type of interrupt
-+		 * and thresholds
-+		 */
-+		hw_id = 0;
-+	}
-+
- 	dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
- 		hw_id, __func__, low, high);
- 
-@@ -584,18 +601,21 @@ int get_temp_tsens_valid(const struct ts
- 	u32 valid;
- 	int ret;
- 
--	ret = regmap_field_read(priv->rf[valid_idx], &valid);
--	if (ret)
--		return ret;
--	while (!valid) {
--		/* Valid bit is 0 for 6 AHB clock cycles.
--		 * At 19.2MHz, 1 AHB clock is ~60ns.
--		 * We should enter this loop very, very rarely.
--		 */
--		ndelay(400);
-+	/* VER_0 doesn't have VALID bit */
-+	if (tsens_version(priv) >= VER_0_1) {
- 		ret = regmap_field_read(priv->rf[valid_idx], &valid);
- 		if (ret)
- 			return ret;
-+		while (!valid) {
-+			/* Valid bit is 0 for 6 AHB clock cycles.
-+			 * At 19.2MHz, 1 AHB clock is ~60ns.
-+			 * We should enter this loop very, very rarely.
-+			 */
-+			ndelay(400);
-+			ret = regmap_field_read(priv->rf[valid_idx], &valid);
-+			if (ret)
-+				return ret;
-+		}
- 	}
- 
- 	/* Valid bit is set, OK to read the temperature */
-@@ -608,15 +628,29 @@ int get_temp_common(const struct tsens_s
- {
- 	struct tsens_priv *priv = s->priv;
- 	int hw_id = s->hw_id;
--	int last_temp = 0, ret;
-+	int last_temp = 0, ret, trdy;
-+	unsigned long timeout;
- 
--	ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
--	if (ret)
--		return ret;
-+	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
-+	do {
-+		if (tsens_version(priv) == VER_0) {
-+			ret = regmap_field_read(priv->rf[TRDY], &trdy);
-+			if (ret)
-+				return ret;
-+			if (!trdy)
-+				continue;
-+		}
- 
--	*temp = code_to_degc(last_temp, s) * 1000;
-+		ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
-+		if (ret)
-+			return ret;
- 
--	return 0;
-+		*temp = code_to_degc(last_temp, s) * 1000;
-+
-+		return 0;
-+	} while (time_before(jiffies, timeout));
-+
-+	return -ETIMEDOUT;
- }
- 
- #ifdef CONFIG_DEBUG_FS
-@@ -738,19 +772,34 @@ int __init init_common(struct tsens_priv
- 		priv->tm_offset = 0x1000;
- 	}
- 
--	res = platform_get_resource(op, IORESOURCE_MEM, 0);
--	tm_base = devm_ioremap_resource(dev, res);
--	if (IS_ERR(tm_base)) {
--		ret = PTR_ERR(tm_base);
--		goto err_put_device;
-+	if (tsens_version(priv) >= VER_0_1) {
-+		res = platform_get_resource(op, IORESOURCE_MEM, 0);
-+		tm_base = devm_ioremap_resource(dev, res);
-+		if (IS_ERR(tm_base)) {
-+			ret = PTR_ERR(tm_base);
-+			goto err_put_device;
-+		}
-+
-+		priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
-+	} else { /* VER_0 share the same gcc regs using a syscon */
-+		struct device *parent = priv->dev->parent;
-+
-+		if (parent)
-+			priv->tm_map = syscon_node_to_regmap(parent->of_node);
- 	}
- 
--	priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
--	if (IS_ERR(priv->tm_map)) {
--		ret = PTR_ERR(priv->tm_map);
-+	if (IS_ERR_OR_NULL(priv->tm_map)) {
-+		if (!priv->tm_map)
-+			ret = -ENODEV;
-+		else
-+			ret = PTR_ERR(priv->tm_map);
- 		goto err_put_device;
- 	}
- 
-+	/* VER_0 have only tm_map */
-+	if (!priv->srot_map)
-+		priv->srot_map = priv->tm_map;
-+
- 	if (tsens_version(priv) > VER_0_1) {
- 		for (i = VER_MAJOR; i <= VER_STEP; i++) {
- 			priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
-@@ -771,6 +820,10 @@ int __init init_common(struct tsens_priv
- 		ret = PTR_ERR(priv->rf[TSENS_EN]);
- 		goto err_put_device;
- 	}
-+	/* in VER_0 TSENS need to be explicitly enabled */
-+	if (tsens_version(priv) == VER_0)
-+		regmap_field_write(priv->rf[TSENS_EN], 1);
-+
- 	ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
- 	if (ret)
- 		goto err_put_device;
-@@ -793,6 +846,19 @@ int __init init_common(struct tsens_priv
- 		goto err_put_device;
- 	}
- 
-+	priv->rf[TSENS_SW_RST] =
-+		devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[TSENS_SW_RST]);
-+	if (IS_ERR(priv->rf[TSENS_SW_RST])) {
-+		ret = PTR_ERR(priv->rf[TSENS_SW_RST]);
-+		goto err_put_device;
-+	}
-+
-+	priv->rf[TRDY] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[TRDY]);
-+	if (IS_ERR(priv->rf[TRDY])) {
-+		ret = PTR_ERR(priv->rf[TRDY]);
-+		goto err_put_device;
-+	}
-+
- 	/* This loop might need changes if enum regfield_ids is reordered */
- 	for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
- 		for (i = 0; i < priv->feat->max_sensors; i++) {
-@@ -808,7 +874,7 @@ int __init init_common(struct tsens_priv
- 		}
- 	}
- 
--	if (priv->feat->crit_int) {
-+	if (priv->feat->crit_int || tsens_version(priv) < VER_0_1) {
- 		/* Loop might need changes if enum regfield_ids is reordered */
- 		for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) {
- 			for (i = 0; i < priv->feat->max_sensors; i++) {
-@@ -846,7 +912,11 @@ int __init init_common(struct tsens_priv
- 	}
- 
- 	spin_lock_init(&priv->ul_lock);
--	tsens_enable_irq(priv);
-+
-+	/* VER_0 interrupt doesn't need to be enabled */
-+	if (tsens_version(priv) >= VER_0_1)
-+		tsens_enable_irq(priv);
-+
- 	tsens_debug_init(op);
- 
- err_put_device:
-@@ -951,10 +1021,19 @@ static int tsens_register_irq(struct tse
- 		if (irq == -ENXIO)
- 			ret = 0;
- 	} else {
--		ret = devm_request_threaded_irq(&pdev->dev, irq,
--						NULL, thread_fn,
--						IRQF_ONESHOT,
--						dev_name(&pdev->dev), priv);
-+		/* VER_0 interrupt is TRIGGER_RISING, VER_0_1 and up is ONESHOT */
-+		if (tsens_version(priv) == VER_0)
-+			ret = devm_request_threaded_irq(&pdev->dev, irq,
-+							thread_fn, NULL,
-+							IRQF_TRIGGER_RISING,
-+							dev_name(&pdev->dev),
-+							priv);
-+		else
-+			ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
-+							thread_fn, IRQF_ONESHOT,
-+							dev_name(&pdev->dev),
-+							priv);
-+
- 		if (ret)
- 			dev_err(&pdev->dev, "%s: failed to get irq\n",
- 				__func__);
-@@ -983,6 +1062,19 @@ static int tsens_register(struct tsens_p
- 			priv->ops->enable(priv, i);
- 	}
- 
-+	/* VER_0 require to set MIN and MAX THRESH
-+	 * These 2 regs are set using the:
-+	 * - CRIT_THRESH_0 for MAX THRESH hardcoded to 120°C
-+	 * - CRIT_THRESH_1 for MIN THRESH hardcoded to   0°C
-+	 */
-+	if (tsens_version(priv) < VER_0_1) {
-+		regmap_field_write(priv->rf[CRIT_THRESH_0],
-+				   tsens_mC_to_hw(priv->sensor, 120000));
-+
-+		regmap_field_write(priv->rf[CRIT_THRESH_1],
-+				   tsens_mC_to_hw(priv->sensor, 0));
-+	}
-+
- 	ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
- 	if (ret < 0)
- 		return ret;
---- a/drivers/thermal/qcom/tsens.h
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -13,6 +13,7 @@
- #define CAL_DEGC_PT2		120
- #define SLOPE_FACTOR		1000
- #define SLOPE_DEFAULT		3200
-+#define TIMEOUT_US		100
- #define THRESHOLD_MAX_ADC_CODE	0x3ff
- #define THRESHOLD_MIN_ADC_CODE	0x0
- 
-@@ -25,7 +26,8 @@ struct tsens_priv;
- 
- /* IP version numbers in ascending order */
- enum tsens_ver {
--	VER_0_1 = 0,
-+	VER_0 = 0,
-+	VER_0_1,
- 	VER_1_X,
- 	VER_2_X,
- };
diff --git a/target/linux/ipq806x/patches-5.10/104-2-drivers-thermal-tsens-Don-t-hardcode-sensor-slope.patch b/target/linux/ipq806x/patches-5.10/104-2-drivers-thermal-tsens-Don-t-hardcode-sensor-slope.patch
deleted file mode 100644
index 109f524bbd05..000000000000
--- a/target/linux/ipq806x/patches-5.10/104-2-drivers-thermal-tsens-Don-t-hardcode-sensor-slope.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From efa0d50a6c5ec7619371dfe4d3e6ca54b73787d5 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Wed, 25 Nov 2020 16:47:21 +0100
-Subject: [PATCH 02/10] drivers: thermal: tsens: Don't hardcode sensor slope
-
-Function compute_intercept_slope hardcode the sensor slope to
-SLOPE_DEFAULT. Change this and use the default value only if a slope is
-not defined. This is needed for tsens VER_0 that has a hardcoded slope
-table.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
----
- drivers/thermal/qcom/tsens.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -86,7 +86,8 @@ void compute_intercept_slope(struct tsen
- 			"%s: sensor%d - data_point1:%#x data_point2:%#x\n",
- 			__func__, i, p1[i], p2[i]);
- 
--		priv->sensor[i].slope = SLOPE_DEFAULT;
-+		if (!priv->sensor[i].slope)
-+			priv->sensor[i].slope = SLOPE_DEFAULT;
- 		if (mode == TWO_PT_CALIB) {
- 			/*
- 			 * slope (m) = adc_code2 - adc_code1 (y2 - y1)/
diff --git a/target/linux/ipq806x/patches-5.10/104-3-drivers-thermal-tsens-Convert-msm8960-to-reg_field.patch b/target/linux/ipq806x/patches-5.10/104-3-drivers-thermal-tsens-Convert-msm8960-to-reg_field.patch
deleted file mode 100644
index bf378107c602..000000000000
--- a/target/linux/ipq806x/patches-5.10/104-3-drivers-thermal-tsens-Convert-msm8960-to-reg_field.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 6bac2e2fa36c2d7c304768a689d8b73155b90aa2 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Wed, 25 Nov 2020 17:15:51 +0100
-Subject: [PATCH 03/10] drivers: thermal: tsens: Convert msm8960 to reg_field
-
-Convert msm9860 driver to reg_field to use the init_common
-function.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
----
- drivers/thermal/qcom/tsens-8960.c | 80 ++++++++++++++++++++++++++++++-
- 1 file changed, 79 insertions(+), 1 deletion(-)
-
---- a/drivers/thermal/qcom/tsens-8960.c
-+++ b/drivers/thermal/qcom/tsens-8960.c
-@@ -51,11 +51,22 @@
- #define MIN_LIMIT_TH		0x0
- #define MAX_LIMIT_TH		0xff
- 
--#define S0_STATUS_ADDR		0x3628
- #define INT_STATUS_ADDR		0x363c
- #define TRDY_MASK		BIT(7)
- #define TIMEOUT_US		100
- 
-+#define S0_STATUS_OFF		0x3628
-+#define S1_STATUS_OFF		0x362c
-+#define S2_STATUS_OFF		0x3630
-+#define S3_STATUS_OFF		0x3634
-+#define S4_STATUS_OFF		0x3638
-+#define S5_STATUS_OFF		0x3664  /* Sensors 5-10 found on apq8064/msm8960 */
-+#define S6_STATUS_OFF		0x3668
-+#define S7_STATUS_OFF		0x366c
-+#define S8_STATUS_OFF		0x3670
-+#define S9_STATUS_OFF		0x3674
-+#define S10_STATUS_OFF		0x3678
-+
- static int suspend_8960(struct tsens_priv *priv)
- {
- 	int ret;
-@@ -269,6 +280,71 @@ static int get_temp_8960(const struct ts
- 	return -ETIMEDOUT;
- }
- 
-+static struct tsens_features tsens_8960_feat = {
-+	.ver_major	= VER_0,
-+	.crit_int	= 0,
-+	.adc		= 1,
-+	.srot_split	= 0,
-+	.max_sensors	= 11,
-+};
-+
-+static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
-+	/* ----- SROT ------ */
-+	/* No VERSION information */
-+
-+	/* CNTL */
-+	[TSENS_EN]     = REG_FIELD(CNTL_ADDR,  0, 0),
-+	[TSENS_SW_RST] = REG_FIELD(CNTL_ADDR,  1, 1),
-+	/* 8960 has 5 sensors, 8660 has 11, we only handle 5 */
-+	[SENSOR_EN]    = REG_FIELD(CNTL_ADDR,  3, 7),
-+
-+	/* ----- TM ------ */
-+	/* INTERRUPT ENABLE */
-+	/* NO INTERRUPT ENABLE */
-+
-+	/* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */
-+	[LOW_THRESH_0]   = REG_FIELD(THRESHOLD_ADDR,  0,  7),
-+	[UP_THRESH_0]    = REG_FIELD(THRESHOLD_ADDR,  8, 15),
-+	/* MIN_THRESH_0 and MAX_THRESH_0 are not present in the regfield
-+	 * Recycle CRIT_THRESH_0 and 1 to set the required regs to hardcoded temp
-+	 * MIN_THRESH_0 -> CRIT_THRESH_1
-+	 * MAX_THRESH_0 -> CRIT_THRESH_0
-+	 */
-+	[CRIT_THRESH_1]   = REG_FIELD(THRESHOLD_ADDR, 16, 23),
-+	[CRIT_THRESH_0]   = REG_FIELD(THRESHOLD_ADDR, 24, 31),
-+
-+	/* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */
-+	/* 1 == clear, 0 == normal operation */
-+	[LOW_INT_CLEAR_0]   = REG_FIELD(CNTL_ADDR,  9,  9),
-+	[UP_INT_CLEAR_0]    = REG_FIELD(CNTL_ADDR, 10, 10),
-+
-+	/* NO CRITICAL INTERRUPT SUPPORT on 8960 */
-+
-+	/* Sn_STATUS */
-+	[LAST_TEMP_0]  = REG_FIELD(S0_STATUS_OFF,  0,  7),
-+	[LAST_TEMP_1]  = REG_FIELD(S1_STATUS_OFF,  0,  7),
-+	[LAST_TEMP_2]  = REG_FIELD(S2_STATUS_OFF,  0,  7),
-+	[LAST_TEMP_3]  = REG_FIELD(S3_STATUS_OFF,  0,  7),
-+	[LAST_TEMP_4]  = REG_FIELD(S4_STATUS_OFF,  0,  7),
-+	[LAST_TEMP_5]  = REG_FIELD(S5_STATUS_OFF,  0,  7),
-+	[LAST_TEMP_6]  = REG_FIELD(S6_STATUS_OFF,  0,  7),
-+	[LAST_TEMP_7]  = REG_FIELD(S7_STATUS_OFF,  0,  7),
-+	[LAST_TEMP_8]  = REG_FIELD(S8_STATUS_OFF,  0,  7),
-+	[LAST_TEMP_9]  = REG_FIELD(S9_STATUS_OFF,  0,  7),
-+	[LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0,  7),
-+
-+	/* No VALID field on 8960 */
-+	/* TSENS_INT_STATUS bits: 1 == threshold violated */
-+	[MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0),
-+	[LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1),
-+	[UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2),
-+	/* No CRITICAL field on 8960 */
-+	[MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3),
-+
-+	/* TRDY: 1=ready, 0=in progress */
-+	[TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7),
-+};
-+
- static const struct tsens_ops ops_8960 = {
- 	.init		= init_8960,
- 	.calibrate	= calibrate_8960,
-@@ -282,4 +358,6 @@ static const struct tsens_ops ops_8960 =
- struct tsens_plat_data data_8960 = {
- 	.num_sensors	= 11,
- 	.ops		= &ops_8960,
-+	.feat		= &tsens_8960_feat,
-+	.fields		= tsens_8960_regfields,
- };
diff --git a/target/linux/ipq806x/patches-5.10/104-4-drivers-thermal-tsens-Use-init_common-for-msm8960.patch b/target/linux/ipq806x/patches-5.10/104-4-drivers-thermal-tsens-Use-init_common-for-msm8960.patch
deleted file mode 100644
index ae8a52c100c3..000000000000
--- a/target/linux/ipq806x/patches-5.10/104-4-drivers-thermal-tsens-Use-init_common-for-msm8960.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From c04f98a496929f75d75c65115d5717423c3d0634 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Wed, 25 Nov 2020 17:16:36 +0100
-Subject: [PATCH 04/10] drivers: thermal: tsens: Use init_common for msm8960
-
-Use init_common and drop custom init for msm8960.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
----
- drivers/thermal/qcom/tsens-8960.c | 52 +------------------------------
- 1 file changed, 1 insertion(+), 51 deletions(-)
-
---- a/drivers/thermal/qcom/tsens-8960.c
-+++ b/drivers/thermal/qcom/tsens-8960.c
-@@ -173,56 +173,6 @@ static void disable_8960(struct tsens_pr
- 	regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
- }
- 
--static int init_8960(struct tsens_priv *priv)
--{
--	int ret, i;
--	u32 reg_cntl;
--
--	priv->tm_map = dev_get_regmap(priv->dev, NULL);
--	if (!priv->tm_map)
--		return -ENODEV;
--
--	/*
--	 * The status registers for each sensor are discontiguous
--	 * because some SoCs have 5 sensors while others have more
--	 * but the control registers stay in the same place, i.e
--	 * directly after the first 5 status registers.
--	 */
--	for (i = 0; i < priv->num_sensors; i++) {
--		if (i >= 5)
--			priv->sensor[i].status = S0_STATUS_ADDR + 40;
--		priv->sensor[i].status += i * 4;
--	}
--
--	reg_cntl = SW_RST;
--	ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
--	if (ret)
--		return ret;
--
--	if (priv->num_sensors > 1) {
--		reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
--		reg_cntl &= ~SW_RST;
--		ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
--					 CONFIG_MASK, CONFIG);
--	} else {
--		reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
--		reg_cntl &= ~CONFIG_MASK_8660;
--		reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
--	}
--
--	reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
--	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
--	if (ret)
--		return ret;
--
--	reg_cntl |= EN;
--	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
--	if (ret)
--		return ret;
--
--	return 0;
--}
--
- static int calibrate_8960(struct tsens_priv *priv)
- {
- 	int i;
-@@ -346,7 +296,7 @@ static const struct reg_field tsens_8960
- };
- 
- static const struct tsens_ops ops_8960 = {
--	.init		= init_8960,
-+	.init		= init_common,
- 	.calibrate	= calibrate_8960,
- 	.get_temp	= get_temp_8960,
- 	.enable		= enable_8960,
diff --git a/target/linux/ipq806x/patches-5.10/104-5-drivers-thermal-tsens-Fix-bug-in-sensor-enable-for-m.patch b/target/linux/ipq806x/patches-5.10/104-5-drivers-thermal-tsens-Fix-bug-in-sensor-enable-for-m.patch
deleted file mode 100644
index 7b01a67d9004..000000000000
--- a/target/linux/ipq806x/patches-5.10/104-5-drivers-thermal-tsens-Fix-bug-in-sensor-enable-for-m.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From b3e8bd33b84a6b6c863bd1733bd15b5f1483b8ab Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Wed, 25 Nov 2020 17:06:55 +0100
-Subject: [PATCH 05/10] drivers: thermal: tsens: Fix bug in sensor enable for
- msm8960
-
-Device based on tsens VER_0 contains a hardware bug that results in some
-problem with sensor enablement. Sensor id 6-11 can't be enabled
-selectively and all of them must be enabled in one step.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
----
- drivers/thermal/qcom/tsens-8960.c | 23 ++++++++++++++++++++---
- 1 file changed, 20 insertions(+), 3 deletions(-)
-
---- a/drivers/thermal/qcom/tsens-8960.c
-+++ b/drivers/thermal/qcom/tsens-8960.c
-@@ -27,9 +27,9 @@
- #define EN			BIT(0)
- #define SW_RST			BIT(1)
- #define SENSOR0_EN		BIT(3)
-+#define MEASURE_PERIOD		BIT(18)
- #define SLP_CLK_ENA		BIT(26)
- #define SLP_CLK_ENA_8660	BIT(24)
--#define MEASURE_PERIOD		1
- #define SENSOR0_SHIFT		3
- 
- /* INT_STATUS_ADDR bitmasks */
-@@ -126,17 +126,34 @@ static int resume_8960(struct tsens_priv
- static int enable_8960(struct tsens_priv *priv, int id)
- {
- 	int ret;
--	u32 reg, mask;
-+	u32 reg, mask = BIT(id);
- 
- 	ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg);
- 	if (ret)
- 		return ret;
- 
--	mask = BIT(id + SENSOR0_SHIFT);
-+	/* HARDWARE BUG:
-+	 * On platforms with more than 6 sensors, all remaining sensors
-+	 * must be enabled together, otherwise undefined results are expected.
-+	 * (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver,
-+	 * all the sensors are enabled in one step hence this bug is not
-+	 * triggered.
-+	 */
-+	if (id > 5)
-+		mask = GENMASK(10, 6);
-+
-+	mask <<= SENSOR0_SHIFT;
-+
-+	/* Sensors already enabled. Skip. */
-+	if ((reg & mask) == mask)
-+		return 0;
-+
- 	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST);
- 	if (ret)
- 		return ret;
- 
-+	reg |= MEASURE_PERIOD;
-+
- 	if (priv->num_sensors > 1)
- 		reg |= mask | SLP_CLK_ENA | EN;
- 	else
diff --git a/target/linux/ipq806x/patches-5.10/104-6-drivers-thermal-tsens-Replace-custom-8960-apis-with-.patch b/target/linux/ipq806x/patches-5.10/104-6-drivers-thermal-tsens-Replace-custom-8960-apis-with-.patch
deleted file mode 100644
index a82f5969542b..000000000000
--- a/target/linux/ipq806x/patches-5.10/104-6-drivers-thermal-tsens-Replace-custom-8960-apis-with-.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From 1ff9f982051759e0387e8c7e793b49c48eae291d Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Wed, 25 Nov 2020 17:11:05 +0100
-Subject: [PATCH 06/10] drivers: thermal: tsens: Replace custom 8960 apis with
- generic apis
-
-Rework calibrate function to use common function. Derive the offset from
-a missing hardcoded slope table and the data from the nvmem calib
-efuses.
-Drop custom get_temp function and use generic api.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
----
- drivers/thermal/qcom/tsens-8960.c | 56 +++++++++----------------------
- 1 file changed, 15 insertions(+), 41 deletions(-)
-
---- a/drivers/thermal/qcom/tsens-8960.c
-+++ b/drivers/thermal/qcom/tsens-8960.c
-@@ -67,6 +67,13 @@
- #define S9_STATUS_OFF		0x3674
- #define S10_STATUS_OFF		0x3678
- 
-+/* Original slope - 200 to compensate mC to C inaccuracy */
-+static u32 tsens_msm8960_slope[] = {
-+			976, 976, 954, 976,
-+			911, 932, 932, 999,
-+			932, 999, 932
-+			};
-+
- static int suspend_8960(struct tsens_priv *priv)
- {
- 	int ret;
-@@ -194,9 +201,7 @@ static int calibrate_8960(struct tsens_p
- {
- 	int i;
- 	char *data;
--
--	ssize_t num_read = priv->num_sensors;
--	struct tsens_sensor *s = priv->sensor;
-+	u32 p1[11];
- 
- 	data = qfprom_read(priv->dev, "calib");
- 	if (IS_ERR(data))
-@@ -204,49 +209,18 @@ static int calibrate_8960(struct tsens_p
- 	if (IS_ERR(data))
- 		return PTR_ERR(data);
- 
--	for (i = 0; i < num_read; i++, s++)
--		s->offset = data[i];
-+	for (i = 0; i < priv->num_sensors; i++) {
-+		p1[i] = data[i];
-+		priv->sensor[i].slope = tsens_msm8960_slope[i];
-+	}
-+
-+	compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB);
- 
- 	kfree(data);
- 
- 	return 0;
- }
- 
--/* Temperature on y axis and ADC-code on x-axis */
--static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
--{
--	int slope, offset;
--
--	slope = thermal_zone_get_slope(s->tzd);
--	offset = CAL_MDEGC - slope * s->offset;
--
--	return adc_code * slope + offset;
--}
--
--static int get_temp_8960(const struct tsens_sensor *s, int *temp)
--{
--	int ret;
--	u32 code, trdy;
--	struct tsens_priv *priv = s->priv;
--	unsigned long timeout;
--
--	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
--	do {
--		ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
--		if (ret)
--			return ret;
--		if (!(trdy & TRDY_MASK))
--			continue;
--		ret = regmap_read(priv->tm_map, s->status, &code);
--		if (ret)
--			return ret;
--		*temp = code_to_mdegC(code, s);
--		return 0;
--	} while (time_before(jiffies, timeout));
--
--	return -ETIMEDOUT;
--}
--
- static struct tsens_features tsens_8960_feat = {
- 	.ver_major	= VER_0,
- 	.crit_int	= 0,
-@@ -315,7 +289,7 @@ static const struct reg_field tsens_8960
- static const struct tsens_ops ops_8960 = {
- 	.init		= init_common,
- 	.calibrate	= calibrate_8960,
--	.get_temp	= get_temp_8960,
-+	.get_temp	= get_temp_common,
- 	.enable		= enable_8960,
- 	.disable	= disable_8960,
- 	.suspend	= suspend_8960,
diff --git a/target/linux/ipq806x/patches-5.10/104-7-drivers-thermal-tsens-Drop-unused-define-for-msm8960.patch b/target/linux/ipq806x/patches-5.10/104-7-drivers-thermal-tsens-Drop-unused-define-for-msm8960.patch
deleted file mode 100644
index 77ca3cfe4578..000000000000
--- a/target/linux/ipq806x/patches-5.10/104-7-drivers-thermal-tsens-Drop-unused-define-for-msm8960.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 5716a61239c6ac9ceb137e825e93c3aea06c4634 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 19 Mar 2021 00:48:23 +0100
-Subject: [PATCH 07/10] drivers: thermal: tsens: Drop unused define for msm8960
-
-Drop unused define for msm8960 replaced by generic api and reg_field.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
----
- drivers/thermal/qcom/tsens-8960.c | 24 +-----------------------
- 1 file changed, 1 insertion(+), 23 deletions(-)
-
---- a/drivers/thermal/qcom/tsens-8960.c
-+++ b/drivers/thermal/qcom/tsens-8960.c
-@@ -10,8 +10,6 @@
- #include <linux/thermal.h>
- #include "tsens.h"
- 
--#define CAL_MDEGC		30000
--
- #define CONFIG_ADDR		0x3640
- #define CONFIG_ADDR_8660	0x3620
- /* CONFIG_ADDR bitmasks */
-@@ -21,39 +19,19 @@
- #define CONFIG_SHIFT_8660	28
- #define CONFIG_MASK_8660	(3 << CONFIG_SHIFT_8660)
- 
--#define STATUS_CNTL_ADDR_8064	0x3660
- #define CNTL_ADDR		0x3620
- /* CNTL_ADDR bitmasks */
- #define EN			BIT(0)
- #define SW_RST			BIT(1)
--#define SENSOR0_EN		BIT(3)
-+
- #define MEASURE_PERIOD		BIT(18)
- #define SLP_CLK_ENA		BIT(26)
- #define SLP_CLK_ENA_8660	BIT(24)
- #define SENSOR0_SHIFT		3
- 
--/* INT_STATUS_ADDR bitmasks */
--#define MIN_STATUS_MASK		BIT(0)
--#define LOWER_STATUS_CLR	BIT(1)
--#define UPPER_STATUS_CLR	BIT(2)
--#define MAX_STATUS_MASK		BIT(3)
--
- #define THRESHOLD_ADDR		0x3624
--/* THRESHOLD_ADDR bitmasks */
--#define THRESHOLD_MAX_LIMIT_SHIFT	24
--#define THRESHOLD_MIN_LIMIT_SHIFT	16
--#define THRESHOLD_UPPER_LIMIT_SHIFT	8
--#define THRESHOLD_LOWER_LIMIT_SHIFT	0
--
--/* Initial temperature threshold values */
--#define LOWER_LIMIT_TH		0x50
--#define UPPER_LIMIT_TH		0xdf
--#define MIN_LIMIT_TH		0x0
--#define MAX_LIMIT_TH		0xff
- 
- #define INT_STATUS_ADDR		0x363c
--#define TRDY_MASK		BIT(7)
--#define TIMEOUT_US		100
- 
- #define S0_STATUS_OFF		0x3628
- #define S1_STATUS_OFF		0x362c
diff --git a/target/linux/ipq806x/patches-5.10/104-8-drivers-thermal-tsens-Add-support-for-ipq8064-tsens.patch b/target/linux/ipq806x/patches-5.10/104-8-drivers-thermal-tsens-Add-support-for-ipq8064-tsens.patch
deleted file mode 100644
index 127abaefc300..000000000000
--- a/target/linux/ipq806x/patches-5.10/104-8-drivers-thermal-tsens-Add-support-for-ipq8064-tsens.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 0d0c22a59bf2672b57e23da9a9ea743e91b71f54 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sat, 25 Jul 2020 19:55:57 +0200
-Subject: [PATCH 08/10] drivers: thermal: tsens: Add support for ipq8064-tsens
-
-Add support for tsens present in ipq806x SoCs based on generic msm8960
-tsens driver.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
----
- drivers/thermal/qcom/tsens.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -968,6 +968,9 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, t
- 
- static const struct of_device_id tsens_table[] = {
- 	{
-+		.compatible = "qcom,ipq8064-tsens",
-+		.data = &data_8960,
-+	}, {
- 		.compatible = "qcom,msm8916-tsens",
- 		.data = &data_8916,
- 	}, {
diff --git a/target/linux/ipq806x/patches-5.10/104-9-dt-bindings-thermal-tsens-Document-ipq8064-bindings.patch b/target/linux/ipq806x/patches-5.10/104-9-dt-bindings-thermal-tsens-Document-ipq8064-bindings.patch
deleted file mode 100644
index 382106863f90..000000000000
--- a/target/linux/ipq806x/patches-5.10/104-9-dt-bindings-thermal-tsens-Document-ipq8064-bindings.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From ac369071920d427dd484cf74cddba2774bba45f5 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 9 Jul 2020 22:35:54 +0200
-Subject: [PATCH 09/10] dt-bindings: thermal: tsens: Document ipq8064 bindings
-
-Document the use of bindings used for msm8960 tsens based devices.
-msm8960 use the same gcc regs and is set as a child of the qcom gcc.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
----
- .../bindings/thermal/qcom-tsens.yaml          | 56 ++++++++++++++++---
- 1 file changed, 48 insertions(+), 8 deletions(-)
-
---- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
-+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
-@@ -19,6 +19,11 @@ description: |
- properties:
-   compatible:
-     oneOf:
-+      - description: msm9860 TSENS based
-+        items:
-+          - enum:
-+              - qcom,ipq8064-tsens
-+
-       - description: v0.1 of TSENS
-         items:
-           - enum:
-@@ -73,7 +78,9 @@ properties:
-     maxItems: 2
-     items:
-       - const: calib
--      - const: calib_sel
-+      - enum:
-+          - calib_backup
-+          - calib_sel
- 
-   "#qcom,sensors":
-     description:
-@@ -88,12 +95,20 @@ properties:
-       Number of cells required to uniquely identify the thermal sensors. Since
-       we have multiple sensors this is set to 1
- 
-+required:
-+  - compatible
-+  - interrupts
-+  - interrupt-names
-+  - "#thermal-sensor-cells"
-+  - "#qcom,sensors"
-+
- allOf:
-   - if:
-       properties:
-         compatible:
-           contains:
-             enum:
-+              - qcom,ipq8064-tsens
-               - qcom,msm8916-tsens
-               - qcom,msm8974-tsens
-               - qcom,msm8976-tsens
-@@ -114,19 +129,44 @@ allOf:
-         interrupt-names:
-           minItems: 2
- 
--required:
--  - compatible
--  - reg
--  - "#qcom,sensors"
--  - interrupts
--  - interrupt-names
--  - "#thermal-sensor-cells"
-+  - if:
-+      properties:
-+        compatible:
-+          contains:
-+            enum:
-+              - qcom,tsens-v0_1
-+              - qcom,tsens-v1
-+              - qcom,tsens-v2
-+
-+    then:
-+      required:
-+        - reg
- 
- additionalProperties: false
- 
- examples:
-   - |
-     #include <dt-bindings/interrupt-controller/arm-gic.h>
-+    // Example msm9860 based SoC (ipq8064):
-+    gcc: clock-controller {
-+
-+           /* ... */
-+
-+           tsens: thermal-sensor {
-+                compatible = "qcom,ipq8064-tsens";
-+
-+                 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
-+                 nvmem-cell-names = "calib", "calib_backup";
-+                 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-+                 interrupt-names = "uplow";
-+
-+                 #qcom,sensors = <11>;
-+                 #thermal-sensor-cells = <1>;
-+          };
-+    };
-+
-+  - |
-+    #include <dt-bindings/interrupt-controller/arm-gic.h>
-     // Example 1 (legacy: for pre v1 IP):
-     tsens1: thermal-sensor@900000 {
-            compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
diff --git a/target/linux/ipq806x/patches-5.10/105-10-drivers-thermal-tsens-Fix-wrong-slope-on-msm-8960.patch b/target/linux/ipq806x/patches-5.10/105-10-drivers-thermal-tsens-Fix-wrong-slope-on-msm-8960.patch
deleted file mode 100644
index 6cdc0b263fb8..000000000000
--- a/target/linux/ipq806x/patches-5.10/105-10-drivers-thermal-tsens-Fix-wrong-slope-on-msm-8960.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 68e720ed73c8f038c8c500e4c49c1e65a993a448 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Tue, 6 Apr 2021 04:45:31 +0200
-Subject: [PATCH 10/10] drivers: thermal: tsens: Fix wrong slope on msm-8960
-
-Some user using some stats with the old legacy implementation and the
-new implementation using the compute_intercept_slope reported an offset
-of 3C. Fix the slope table to reflect the original temp.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/thermal/qcom/tsens-8960.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/thermal/qcom/tsens-8960.c
-+++ b/drivers/thermal/qcom/tsens-8960.c
-@@ -45,11 +45,11 @@
- #define S9_STATUS_OFF		0x3674
- #define S10_STATUS_OFF		0x3678
- 
--/* Original slope - 200 to compensate mC to C inaccuracy */
-+/* Original slope - 350 to compensate mC to C inaccuracy */
- static u32 tsens_msm8960_slope[] = {
--			976, 976, 954, 976,
--			911, 932, 932, 999,
--			932, 999, 932
-+			826, 826, 804, 826,
-+			761, 782, 782, 849,
-+			782, 849, 782
- 			};
- 
- static int suspend_8960(struct tsens_priv *priv)
diff --git a/target/linux/ipq806x/patches-5.10/107-1-thermal-qcom-tsens-init-debugfs-only-with-successful.patch b/target/linux/ipq806x/patches-5.10/107-1-thermal-qcom-tsens-init-debugfs-only-with-successful.patch
deleted file mode 100644
index 5c9ba71c794d..000000000000
--- a/target/linux/ipq806x/patches-5.10/107-1-thermal-qcom-tsens-init-debugfs-only-with-successful.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 8f32d48a309246a80bdca505968085a484d54408 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 19 Apr 2021 03:01:53 +0200
-Subject: [thermal-next PATCH v2 1/2] thermal: qcom: tsens: init debugfs only with
- successful probe
-
-calibrate and tsens_register can fail or PROBE_DEFER. This will cause a
-double or a wrong init of the debugfs information. Init debugfs only
-with successful probe fixing warning about directory already present.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
----
- drivers/thermal/qcom/tsens.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -918,8 +918,6 @@ int __init init_common(struct tsens_priv
- 	if (tsens_version(priv) >= VER_0_1)
- 		tsens_enable_irq(priv);
- 
--	tsens_debug_init(op);
--
- err_put_device:
- 	put_device(&op->dev);
- 	return ret;
-@@ -1161,7 +1159,12 @@ static int tsens_probe(struct platform_d
- 		}
- 	}
- 
--	return tsens_register(priv);
-+	ret = tsens_register(priv);
-+
-+	if (!ret)
-+		tsens_debug_init(pdev);
-+
-+	return ret;
- }
- 
- static int tsens_remove(struct platform_device *pdev)
diff --git a/target/linux/ipq806x/patches-5.10/107-2-thermal-qcom-tsens-simplify-debugfs-init-function.patch b/target/linux/ipq806x/patches-5.10/107-2-thermal-qcom-tsens-simplify-debugfs-init-function.patch
deleted file mode 100644
index 0fbc4bd8cad8..000000000000
--- a/target/linux/ipq806x/patches-5.10/107-2-thermal-qcom-tsens-simplify-debugfs-init-function.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 4204f22060f7a5d42c6ccb4d4c25a6a875571099 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 19 Apr 2021 03:08:37 +0200
-Subject: [thermal-next PATCH v2 2/2] thermal: qcom: tsens: simplify debugfs init
- function
-
-Simplify debugfs init function.
-- Add check for existing dev directory.
-- Fix wrong version in dbg_version_show (with version 0.0.0, 0.1.0 was
-  incorrectly reported)
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
----
- drivers/thermal/qcom/tsens.c | 16 +++++++---------
- 1 file changed, 7 insertions(+), 9 deletions(-)
-
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -692,7 +692,7 @@ static int dbg_version_show(struct seq_f
- 			return ret;
- 		seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver);
- 	} else {
--		seq_puts(s, "0.1.0\n");
-+		seq_printf(s, "0.%d.0\n", priv->feat->ver_major);
- 	}
- 
- 	return 0;
-@@ -704,21 +704,17 @@ DEFINE_SHOW_ATTRIBUTE(dbg_sensors);
- static void tsens_debug_init(struct platform_device *pdev)
- {
- 	struct tsens_priv *priv = platform_get_drvdata(pdev);
--	struct dentry *root, *file;
- 
--	root = debugfs_lookup("tsens", NULL);
--	if (!root)
-+	priv->debug_root = debugfs_lookup("tsens", NULL);
-+	if (!priv->debug_root)
- 		priv->debug_root = debugfs_create_dir("tsens", NULL);
--	else
--		priv->debug_root = root;
- 
--	file = debugfs_lookup("version", priv->debug_root);
--	if (!file)
-+	if (!debugfs_lookup("version", priv->debug_root))
- 		debugfs_create_file("version", 0444, priv->debug_root,
- 				    pdev, &dbg_version_fops);
- 
- 	/* A directory for each instance of the TSENS IP */
--	priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root);
-+	priv->debug = debugfs_lookup(dev_name(&pdev->dev), priv->debug_root);
- 	debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops);
- }
- #else
diff --git a/target/linux/ipq806x/patches-5.10/108-v5.14-net-stmmac-explicitly-deassert-gmac-ahb-reset.patch b/target/linux/ipq806x/patches-5.10/108-v5.14-net-stmmac-explicitly-deassert-gmac-ahb-reset.patch
deleted file mode 100644
index 508c6ba65e6a..000000000000
--- a/target/linux/ipq806x/patches-5.10/108-v5.14-net-stmmac-explicitly-deassert-gmac-ahb-reset.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From e67f325e9cd67562b761e884680c0fec03a6f404 Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Tue, 8 Jun 2021 19:59:06 +0100
-Subject: net: stmmac: explicitly deassert GMAC_AHB_RESET
-
-We are currently assuming that GMAC_AHB_RESET will already be deasserted
-by the bootloader. However if this has not been done, probing of the GMAC
-will fail. To remedy this we must ensure GMAC_AHB_RESET has been deasserted
-prior to probing.
-
-v2 changes:
- - remove NULL condition check for stmmac_ahb_rst in stmmac_main.c
- - unwrap dev_err() message in stmmac_main.c
- - add PTR_ERR() around plat->stmmac_ahb_rst in stmmac_platform.c
-
-v3 changes:
- - add error pointer to dev_err() output
- - add reset_control_assert(stmmac_ahb_rst) in stmmac_dvr_remove
- - revert PTR_ERR() around plat->stmmac_ahb_rst since this is performed
-   on the returned value of ret by the calling function
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c     | 5 +++++
- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 6 ++++++
- include/linux/stmmac.h                                | 1 +
- 3 files changed, 12 insertions(+)
-
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -5052,6 +5052,10 @@ int stmmac_dvr_probe(struct device *devi
- 			reset_control_reset(priv->plat->stmmac_rst);
- 	}
- 
-+	ret = reset_control_deassert(priv->plat->stmmac_ahb_rst);
-+	if (ret == -ENOTSUPP)
-+		dev_err(priv->device, "unable to bring out of ahb reset\n");
-+
- 	/* Init MAC and get the capabilities */
- 	ret = stmmac_hw_init(priv);
- 	if (ret)
-@@ -5266,6 +5270,7 @@ int stmmac_dvr_remove(struct device *dev
- 	phylink_destroy(priv->phylink);
- 	if (priv->plat->stmmac_rst)
- 		reset_control_assert(priv->plat->stmmac_rst);
-+	reset_control_assert(priv->plat->stmmac_ahb_rst);
- 	pm_runtime_put(dev);
- 	pm_runtime_disable(dev);
- 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-@@ -616,6 +616,12 @@ stmmac_probe_config_dt(struct platform_d
- 		plat->stmmac_rst = NULL;
- 	}
- 
-+	plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared(
-+							&pdev->dev, "ahb");
-+	if (IS_ERR(plat->stmmac_ahb_rst))
-+		if (PTR_ERR(plat->stmmac_ahb_rst) == -EPROBE_DEFER)
-+			goto error_hw_init;
-+
- 	return plat;
- 
- error_hw_init:
---- a/include/linux/stmmac.h
-+++ b/include/linux/stmmac.h
-@@ -192,6 +192,7 @@ struct plat_stmmacenet_data {
- 	unsigned int clk_ref_rate;
- 	s32 ptp_max_adj;
- 	struct reset_control *stmmac_rst;
-+	struct reset_control *stmmac_ahb_rst;
- 	struct stmmac_axi *axi;
- 	int has_gmac4;
- 	bool has_sun8i;
diff --git a/target/linux/ipq806x/patches-5.10/109-v5.15-arm-dts-qcom-add-ahb-reset-to-ipq806x-gmac.patch b/target/linux/ipq806x/patches-5.10/109-v5.15-arm-dts-qcom-add-ahb-reset-to-ipq806x-gmac.patch
deleted file mode 100644
index d94d8982330a..000000000000
--- a/target/linux/ipq806x/patches-5.10/109-v5.15-arm-dts-qcom-add-ahb-reset-to-ipq806x-gmac.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From f95c4c56d65225a537a2d88735fde7ec4d37641d Mon Sep 17 00:00:00 2001
-From: Matthew Hagan <mnhagan88@gmail.com>
-Date: Sat, 5 Jun 2021 18:35:38 +0100
-Subject: ARM: dts: qcom: add ahb reset to ipq806x-gmac
-
-Add GMAC_AHB_RESET to the resets property of each gmac node.
-
-Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
-Link: https://lore.kernel.org/r/20210605173546.4102455-2-mnhagan88@gmail.com
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
----
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 20 ++++++++++++--------
- 1 file changed, 12 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -1334,8 +1334,9 @@
- 			clocks = <&gcc GMAC_CORE1_CLK>;
- 			clock-names = "stmmaceth";
- 
--			resets = <&gcc GMAC_CORE1_RESET>;
--			reset-names = "stmmaceth";
-+			resets = <&gcc GMAC_CORE1_RESET>,
-+				 <&gcc GMAC_AHB_RESET>;
-+			reset-names = "stmmaceth", "ahb";
- 
- 			status = "disabled";
- 		};
-@@ -1357,8 +1358,9 @@
- 			clocks = <&gcc GMAC_CORE2_CLK>;
- 			clock-names = "stmmaceth";
- 
--			resets = <&gcc GMAC_CORE2_RESET>;
--			reset-names = "stmmaceth";
-+			resets = <&gcc GMAC_CORE2_RESET>,
-+				 <&gcc GMAC_AHB_RESET>;
-+			reset-names = "stmmaceth", "ahb";
- 
- 			status = "disabled";
- 		};
-@@ -1380,8 +1382,9 @@
- 			clocks = <&gcc GMAC_CORE3_CLK>;
- 			clock-names = "stmmaceth";
- 
--			resets = <&gcc GMAC_CORE3_RESET>;
--			reset-names = "stmmaceth";
-+			resets = <&gcc GMAC_CORE3_RESET>,
-+				 <&gcc GMAC_AHB_RESET>;
-+			reset-names = "stmmaceth", "ahb";
- 
- 			status = "disabled";
- 		};
-@@ -1403,8 +1406,9 @@
- 			clocks = <&gcc GMAC_CORE4_CLK>;
- 			clock-names = "stmmaceth";
- 
--			resets = <&gcc GMAC_CORE4_RESET>;
--			reset-names = "stmmaceth";
-+			resets = <&gcc GMAC_CORE4_RESET>,
-+				 <&gcc GMAC_AHB_RESET>;
-+			reset-names = "stmmaceth", "ahb";
- 
- 			status = "disabled";
- 		};
diff --git a/target/linux/ipq806x/patches-5.10/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq806x/patches-5.10/850-soc-add-qualcomm-syscon.patch
deleted file mode 100644
index d433cb49b85f..000000000000
--- a/target/linux/ipq806x/patches-5.10/850-soc-add-qualcomm-syscon.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From: Christian Lamparter <chunkeey@googlemail.com>
-Subject: SoC: add qualcomm syscon
---- a/drivers/soc/qcom/Makefile
-+++ b/drivers/soc/qcom/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
- obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
- obj-$(CONFIG_QCOM_SOCINFO)	+= socinfo.o
- obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
-+obj-$(CONFIG_QCOM_TCSR)	 += qcom_tcsr.o
- obj-$(CONFIG_QCOM_APR) += apr.o
- obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
- obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
---- a/drivers/soc/qcom/Kconfig
-+++ b/drivers/soc/qcom/Kconfig
-@@ -191,6 +191,13 @@ config QCOM_SOCINFO
- 	 Say yes here to support the Qualcomm socinfo driver, providing
- 	 information about the SoC to user space.
- 
-+config QCOM_TCSR
-+	tristate "QCOM Top Control and Status Registers"
-+	depends on ARCH_QCOM
-+	help
-+	  Say y here to enable TCSR support.  The TCSR provides control
-+	  functions for various peripherals.
-+
- config QCOM_WCNSS_CTRL
- 	tristate "Qualcomm WCNSS control driver"
- 	depends on ARCH_QCOM || COMPILE_TEST
---- /dev/null
-+++ b/drivers/soc/qcom/qcom_tcsr.c
-@@ -0,0 +1,64 @@
-+/*
-+ * Copyright (c) 2014, The Linux foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License rev 2 and
-+ * only rev 2 as published by the free Software foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/platform_device.h>
-+
-+#define TCSR_USB_PORT_SEL	0xb0
-+
-+static int tcsr_probe(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+	const struct device_node *node = pdev->dev.of_node;
-+	void __iomem *base;
-+	u32 val;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	base = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(base))
-+		return PTR_ERR(base);
-+
-+	if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) {
-+		dev_err(&pdev->dev, "setting usb port select = %d\n", val);
-+		writel(val, base + TCSR_USB_PORT_SEL);
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id tcsr_dt_match[] = {
-+	{ .compatible = "qcom,tcsr", },
-+	{ },
-+};
-+
-+MODULE_DEVICE_TABLE(of, tcsr_dt_match);
-+
-+static struct platform_driver tcsr_driver = {
-+	.driver = {
-+		.name		= "tcsr",
-+		.owner		= THIS_MODULE,
-+		.of_match_table	= tcsr_dt_match,
-+	},
-+	.probe = tcsr_probe,
-+};
-+
-+module_platform_driver(tcsr_driver);
-+
-+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
-+MODULE_DESCRIPTION("QCOM TCSR driver");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/include/dt-bindings/soc/qcom,tcsr.h
-@@ -0,0 +1,23 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+#ifndef __DT_BINDINGS_QCOM_TCSR_H
-+#define __DT_BINDINGS_QCOM_TCSR_H
-+
-+#define TCSR_USB_SELECT_USB3_P0		0x1
-+#define TCSR_USB_SELECT_USB3_P1		0x2
-+#define TCSR_USB_SELECT_USB3_DUAL	0x3
-+
-+/* TCSR A/B REG */
-+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL     0
-+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL     1
-+
-+#endif
diff --git a/target/linux/ipq806x/patches-5.10/900-arm-add-cmdline-override.patch b/target/linux/ipq806x/patches-5.10/900-arm-add-cmdline-override.patch
deleted file mode 100644
index 3f433289617e..000000000000
--- a/target/linux/ipq806x/patches-5.10/900-arm-add-cmdline-override.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1790,6 +1790,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGL
- 
- endchoice
- 
-+config CMDLINE_OVERRIDE
-+	bool "Use alternative cmdline from device tree"
-+	help
-+	  Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
-+	  be used, this is not a good option for kernels that are shared across
-+	  devices. This setting enables using "chosen/cmdline-override" as the
-+	  cmdline if it exists in the device tree.
-+
- config CMDLINE
- 	string "Default kernel command string"
- 	default ""
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -1058,6 +1058,17 @@ int __init early_init_dt_scan_chosen(uns
- 	if (p != NULL && l > 0)
- 		strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));
- 
-+    /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
-+     * device tree option of chosen/bootargs-override. This is
-+     * helpful on boards where u-boot sets bootargs, and is unable
-+     * to be modified.
-+     */
-+#ifdef CONFIG_CMDLINE_OVERRIDE
-+	p = of_get_flat_dt_prop(node, "bootargs-override", &l);
-+	if (p != NULL && l > 0)
-+		strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-+#endif
-+
- 	/*
- 	 * CONFIG_CMDLINE is meant to be a default in case nothing else
- 	 * managed to set the command line, unless CONFIG_CMDLINE_FORCE
diff --git a/target/linux/kirkwood/config-5.10 b/target/linux/kirkwood/config-5.10
deleted file mode 100644
index 9c9afa4b629d..000000000000
--- a/target/linux/kirkwood/config-5.10
+++ /dev/null
@@ -1,293 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_CPU_AUTO=y
-# CONFIG_ARCH_MULTI_V4 is not set
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_MULTI_V4_V5=y
-CONFIG_ARCH_MULTI_V5=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-# CONFIG_ARMADA_37XX_WATCHDOG is not set
-# CONFIG_ARMADA_THERMAL is not set
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_LEDS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FEROCEON=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_MARVELL=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-CONFIG_DEBUG_UART_8250_SHIFT=2
-CONFIG_DEBUG_UART_PHYS=0xf1012000
-CONFIG_DEBUG_UART_VIRT=0xfed12000
-CONFIG_DEBUG_UNCOMPRESS=y
-# CONFIG_DLCI is not set
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FORCE_PCI=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_PXA is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KIRKWOOD_CLK=y
-CONFIG_KIRKWOOD_THERMAL=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_NETXBIG=y
-CONFIG_LEDS_NS2=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_KIRKWOOD=y
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-# CONFIG_MTD_NAND_MARVELL is not set
-CONFIG_MTD_NAND_ORION=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MV643XX_ETH=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-# CONFIG_MVNETA is not set
-# CONFIG_MVPP2 is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_IRQCHIP=y
-CONFIG_ORION_TIMER=y
-CONFIG_ORION_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_BRIDGE_EMUL=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_MVEBU_A3700_UTMI is not set
-# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
-CONFIG_PHY_MVEBU_SATA=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_KIRKWOOD=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_SX150X=y
-CONFIG_PLAT_ORION=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_RESET_LINKSTATION=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MV=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_SATA_HOST=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-# CONFIG_SERIAL_MVEBU_UART is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_ARMADA_3700 is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_ORION=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_LED_TRIG=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-# CONFIG_VFP is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WAN=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/kirkwood/patches-5.10/100-ib62x0.patch b/target/linux/kirkwood/patches-5.10/100-ib62x0.patch
deleted file mode 100644
index 0637c24b6318..000000000000
--- a/target/linux/kirkwood/patches-5.10/100-ib62x0.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
-+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
-@@ -6,7 +6,14 @@
- 
- / {
- 	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
--	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+	compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+	aliases {
-+		led-boot = &led_green_os;
-+		led-failsafe = &led_red_os;
-+		led-running = &led_green_os;
-+		led-upgrade = &led_red_os;
-+	};
- 
- 	memory {
- 		device_type = "memory";
-@@ -81,12 +88,12 @@
- 			     &pmx_led_usb_transfer>;
- 		pinctrl-names = "default";
- 
--		green-os {
-+		led_green_os: green-os {
- 			label = "ib62x0:green:os";
- 			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
--		red-os {
-+		led_red_os: red-os {
- 			label = "ib62x0:red:os";
- 			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
- 		};
-@@ -118,13 +125,13 @@
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x600000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@700000 {
--		label = "root";
--		reg = <0x0700000 0xf900000>;
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0xfe00000>;
- 	};
- 
- };
diff --git a/target/linux/kirkwood/patches-5.10/101-iconnect.patch b/target/linux/kirkwood/patches-5.10/101-iconnect.patch
deleted file mode 100644
index 935e2dfcf548..000000000000
--- a/target/linux/kirkwood/patches-5.10/101-iconnect.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -8,6 +8,13 @@
- 	model = "Iomega Iconnect";
- 	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_power_blue;
-+		led-failsafe = &led_power_red;
-+		led-running = &led_power_blue;
-+		led-upgrade = &led_power_red;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x10000000>;
-@@ -16,8 +23,6 @@
- 	chosen {
- 		bootargs = "console=ttyS0,115200n8 earlyprintk";
- 		stdout-path = &uart0;
--		linux,initrd-start = <0x4500040>;
--		linux,initrd-end   = <0x4800000>;
- 	};
- 
- 	ocp@f1000000 {
-@@ -89,12 +94,12 @@
- 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- 			default-state = "on";
- 		};
--		power-blue {
-+		led_power_blue: power-blue {
- 			label = "power:blue";
- 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
--		power-red {
-+		led_power_red: power-red {
- 			label = "power:red";
- 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
- 		};
-@@ -146,28 +151,23 @@
- 	status = "okay";
- 
- 	partition@0 {
--		label = "uboot";
--		reg = <0x0000000 0xc0000>;
-+		label = "u-boot";
-+		reg = <0x0000000 0xe0000>;
- 	};
- 
--	partition@a0000 {
--		label = "env";
--		reg = <0xa0000 0x20000>;
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
- 	};
- 
- 	partition@100000 {
--		label = "zImage";
--		reg = <0x100000 0x300000>;
--	};
--
--	partition@540000 {
--		label = "initrd";
--		reg = <0x540000 0x300000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@980000 {
--		label = "boot";
--		reg = <0x980000 0x1f400000>;
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0x1fe00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-5.10/102-dockstar.patch b/target/linux/kirkwood/patches-5.10/102-dockstar.patch
deleted file mode 100644
index 127f84962c19..000000000000
--- a/target/linux/kirkwood/patches-5.10/102-dockstar.patch
+++ /dev/null
@@ -1,62 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-dockstar.dts
-+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
-@@ -8,6 +8,13 @@
- 	model = "Seagate FreeAgent Dockstar";
- 	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_health;
-+		led-failsafe = &led_fault;
-+		led-running = &led_health;
-+		led-upgrade = &led_fault;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x8000000>;
-@@ -42,12 +49,12 @@
- 		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
- 		pinctrl-names = "default";
- 
--		health {
-+		led_health: health {
- 			label = "status:green:health";
- 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
--		fault {
-+		led_fault: fault {
- 			label = "status:orange:fault";
- 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- 		};
-@@ -78,18 +85,22 @@
- 
- 	partition@0 {
- 		label = "u-boot";
--		reg = <0x0000000 0x100000>;
--		read-only;
-+		reg = <0x0000000 0xe0000>;
-+	};
-+
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x400000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@500000 {
--		label = "data";
--		reg = <0x0500000 0xfb00000>;
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0xfe00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-5.10/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-5.10/103-iomega-ix2-200.patch
deleted file mode 100644
index 9313b4bc3e30..000000000000
--- a/target/linux/kirkwood/patches-5.10/103-iomega-ix2-200.patch
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-@@ -8,6 +8,13 @@
- 	model = "Iomega StorCenter ix2-200";
- 	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_power;
-+		led-failsafe = &led_health;
-+		led-running = &led_power;
-+		led-upgrade = &led_health;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x10000000>;
-@@ -127,16 +134,16 @@
- 			      &pmx_led_rebuild &pmx_led_health >;
- 		pinctrl-names = "default";
- 
--		power_led {
-+		led_power: power_led {
- 			label = "status:white:power_led";
- 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
- 		rebuild_led {
- 			label = "status:white:rebuild_led";
- 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- 		};
--		health_led {
-+		led_health: health_led {
- 			label = "status:red:health_led";
- 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- 		};
-@@ -186,18 +193,18 @@
- 	};
- 
- 	partition@a0000 {
--		label = "env";
-+		label = "u-boot environment";
- 		reg = <0xa0000 0x20000>;
- 		read-only;
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
-+		label = "kernel";
- 		reg = <0x100000 0x300000>;
- 	};
- 
- 	partition@400000 {
--		label = "rootfs";
-+		label = "ubi";
- 		reg = <0x400000 0x1C00000>;
- 	};
- };
-@@ -211,7 +218,7 @@
- };
- 
- &eth0 {
--	status = "okay";
-+	status = "disabled";
- 	ethernet0-port@0 {
- 		speed = <1000>;
- 		duplex = <1>;
diff --git a/target/linux/kirkwood/patches-5.10/105-linksys-viper-dts.patch b/target/linux/kirkwood/patches-5.10/105-linksys-viper-dts.patch
deleted file mode 100644
index d56a469d94a2..000000000000
--- a/target/linux/kirkwood/patches-5.10/105-linksys-viper-dts.patch
+++ /dev/null
@@ -1,59 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-@@ -24,6 +24,10 @@
- 	};
- 
- 	aliases {
-+		led-boot = &led_white_health;
-+		led-failsafe = &led_white_health;
-+		led-running = &led_white_health;
-+		led-upgrade = &led_white_health;
- 		serial0 = &uart0;
- 	};
- 
-@@ -56,9 +60,10 @@
- 		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
- 		pinctrl-names = "default";
- 
--		white-health {
-+		led_white_health: white-health {
- 			label = "viper:white:health";
- 			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+			default-state = "on";
- 		};
- 
- 		white-pulse {
-@@ -114,23 +119,23 @@
- 		};
- 
- 		partition@200000 {
--			label = "kernel";
--			reg = <0x200000 0x2A0000>;
-+			label = "kernel1";
-+			reg = <0x200000 0x1A00000>;
- 		};
- 
--		partition@4a0000 {
--			label = "rootfs";
--			reg = <0x4A0000 0x1760000>;
-+		partition@500000 {
-+			label = "rootfs1";
-+			reg = <0x500000 0x1700000>;
- 		};
- 
- 		partition@1c00000 {
--			label = "alt_kernel";
--			reg = <0x1C00000 0x2A0000>;
-+			label = "kernel2";
-+			reg = <0x1C00000 0x1A00000>;
- 		};
- 
--		partition@1ea0000 {
--			label = "alt_rootfs";
--			reg = <0x1EA0000 0x1760000>;
-+		partition@1f00000 {
-+			label = "rootfs2";
-+			reg = <0x1F00000 0x1700000>;
- 		};
- 
- 		partition@3600000 {
diff --git a/target/linux/kirkwood/patches-5.10/106-goflexnet.patch b/target/linux/kirkwood/patches-5.10/106-goflexnet.patch
deleted file mode 100644
index 82cf90841e30..000000000000
--- a/target/linux/kirkwood/patches-5.10/106-goflexnet.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
-+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
-@@ -8,6 +8,13 @@
- 	model = "Seagate GoFlex Net";
- 	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_health;
-+		led-failsafe = &led_fault;
-+		led-running = &led_health;
-+		led-upgrade = &led_fault;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x8000000>;
-@@ -85,12 +92,12 @@
- 			    >;
- 		pinctrl-names = "default";
- 
--		health {
-+		led_health: health {
- 			label = "status:green:health";
- 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
--		fault {
-+		led_fault: fault {
- 			label = "status:orange:fault";
- 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- 		};
-@@ -159,18 +166,8 @@
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x400000>;
--	};
--
--	partition@500000 {
--		label = "pogoplug";
--		reg = <0x0500000 0x2000000>;
--	};
--
--	partition@2500000 {
--		label = "root";
--		reg = <0x02500000 0xd800000>;
-+		label = "ubi";
-+		reg = <0x0100000 0x0ff00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-5.10/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-5.10/107-01-zyxel-nsa3x0-common-nand-partitions.patch
deleted file mode 100644
index df654033fd8c..000000000000
--- a/target/linux/kirkwood/patches-5.10/107-01-zyxel-nsa3x0-common-nand-partitions.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
-@@ -112,40 +112,16 @@
- 
- 	partition@0 {
- 		label = "uboot";
--		reg = <0x0000000 0x0100000>;
-+		reg = <0x0000000 0x00c0000>;
- 		read-only;
- 	};
- 	partition@100000 {
- 		label = "uboot_env";
--		reg = <0x0100000 0x0080000>;
-+		reg = <0x00c0000 0x0080000>;
- 	};
--	partition@180000 {
--		label = "key_store";
--		reg = <0x0180000 0x0080000>;
--	};
--	partition@200000 {
--		label = "info";
--		reg = <0x0200000 0x0080000>;
--	};
--	partition@280000 {
--		label = "etc";
--		reg = <0x0280000 0x0a00000>;
--	};
--	partition@c80000 {
--		label = "kernel_1";
--		reg = <0x0c80000 0x0a00000>;
--	};
--	partition@1680000 {
--		label = "rootfs1";
--		reg = <0x1680000 0x2fc0000>;
--	};
--	partition@4640000 {
--		label = "kernel_2";
--		reg = <0x4640000 0x0a00000>;
--	};
--	partition@5040000 {
--		label = "rootfs2";
--		reg = <0x5040000 0x2fc0000>;
-+	partition@140000 {
-+		label = "ubi";
-+		reg = <0x0140000 0x7ec0000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-5.10/107-03-nsa325.patch b/target/linux/kirkwood/patches-5.10/107-03-nsa325.patch
deleted file mode 100644
index 374c0895a99e..000000000000
--- a/target/linux/kirkwood/patches-5.10/107-03-nsa325.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-nsa325.dts
-+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
-@@ -15,6 +15,13 @@
- 	model = "ZyXEL NSA325";
- 	compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_green_sys;
-+		led-failsafe = &led_orange_sys;
-+		led-running = &led_green_sys;
-+		led-upgrade = &led_orange_sys;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x20000000>;
-@@ -162,17 +169,19 @@
- 			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
- 		pinctrl-names = "default";
- 
--		green-sys {
-+		led_green_sys: green-sys {
- 			label = "nsa325:green:sys";
- 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-+			default-state = "on";
- 		};
--		orange-sys {
-+		led_orange_sys: orange-sys {
- 			label = "nsa325:orange:sys";
- 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- 		};
- 		green-hdd1 {
- 			label = "nsa325:green:hdd1";
- 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "ata1";
- 		};
- 		red-hdd1 {
- 			label = "nsa325:red:hdd1";
-@@ -181,6 +190,7 @@
- 		green-hdd2 {
- 			label = "nsa325:green:hdd2";
- 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "ata2";
- 		};
- 		red-hdd2 {
- 			label = "nsa325:red:hdd2";
-@@ -189,6 +199,7 @@
- 		green-usb {
- 			label = "nsa325:green:usb";
- 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "usb-host";
- 		};
- 		green-copy {
- 			label = "nsa325:green:copy";
diff --git a/target/linux/kirkwood/patches-5.10/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-5.10/109-pogoplug_v4.patch
deleted file mode 100644
index 4273eb9af19e..000000000000
--- a/target/linux/kirkwood/patches-5.10/109-pogoplug_v4.patch
+++ /dev/null
@@ -1,87 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
-+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
-@@ -18,12 +18,20 @@
- 	compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
- 		     "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_health;
-+		led-failsafe = &led_fault;
-+		led-running = &led_health;
-+		led-upgrade = &led_fault;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
- 	chosen {
-+		bootargs = "console=ttyS0,115200";
- 		stdout-path = "uart0:115200n8";
- 	};
- 
-@@ -37,8 +45,8 @@
- 		eject {
- 			debounce-interval = <50>;
- 			wakeup-source;
--			linux,code = <KEY_EJECTCD>;
--			label = "Eject Button";
-+			linux,code = <KEY_RESTART>;
-+			label = "Reset";
- 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- 		};
- 	};
-@@ -48,12 +56,12 @@
- 		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
- 		pinctrl-names = "default";
- 
--		health {
-+		led_health: health {
- 			label = "pogoplugv4:green:health";
- 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
- 			default-state = "on";
- 		};
--		fault {
-+		led_fault: fault {
- 			label = "pogoplugv4:red:fault";
- 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- 		};
-@@ -137,29 +145,19 @@
- 		#size-cells = <1>;
- 
- 		partition@0 {
--			label = "u-boot";
--			reg = <0x00000000 0x200000>;
-+			label = "uboot";
-+			reg = <0x00000000 0x1c0000>;
- 			read-only;
- 		};
- 
--		partition@200000 {
--			label = "uImage";
--			reg = <0x00200000 0x300000>;
--		};
--
--		partition@500000 {
--			label = "uImage2";
--			reg = <0x00500000 0x300000>;
--		};
--
--		partition@800000 {
--			label = "failsafe";
--			reg = <0x00800000 0x800000>;
-+		partition@1c0000 {
-+			label = "uboot_env";
-+			reg = <0x001c0000 0x40000>;
- 		};
- 
--		partition@1000000 {
--			label = "root";
--			reg = <0x01000000 0x7000000>;
-+		partition@200000 {
-+			label = "ubi";
-+			reg = <0x00200000 0x7e00000>;
- 		};
- 	};
- };
diff --git a/target/linux/kirkwood/patches-5.10/110-pogo_e02.patch b/target/linux/kirkwood/patches-5.10/110-pogo_e02.patch
deleted file mode 100644
index fc384d3521f9..000000000000
--- a/target/linux/kirkwood/patches-5.10/110-pogo_e02.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
-+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
-@@ -20,6 +20,13 @@
- 	compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
- 		     "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_health;
-+		led-failsafe = &led_fault;
-+		led-running = &led_health;
-+		led-upgrade = &led_fault;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x10000000>;
-@@ -33,12 +40,12 @@
- 	gpio-leds {
- 		compatible = "gpio-leds";
- 
--		health {
-+		led_health: health {
- 			label = "pogo_e02:green:health";
- 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
--		fault {
-+		led_fault: fault {
- 			label = "pogo_e02:orange:fault";
- 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
- 		};
-@@ -95,24 +102,24 @@
- 	status = "okay";
- 
- 	partition@0 {
--		label = "u-boot";
--		reg = <0x0000000 0x100000>;
-+		label = "uboot";
-+		reg = <0x0 0xe0000>;
- 		read-only;
- 	};
- 
--	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x400000>;
-+	partition@e0000 {
-+		label = "uboot_env";
-+		reg = <0xe0000 0x20000>;
- 	};
- 
--	partition@500000 {
--		label = "pogoplug";
--		reg = <0x0500000 0x2000000>;
-+	partition@100000 {
-+		label = "second_stage_uboot";
-+		reg = <0x100000 0x100000>;
- 	};
- 
--	partition@2500000 {
--		label = "root";
--		reg = <0x02500000 0x5b00000>;
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0x7e00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-5.10/111-l-50.patch b/target/linux/kirkwood/patches-5.10/111-l-50.patch
deleted file mode 100644
index bc933cb610b5..000000000000
--- a/target/linux/kirkwood/patches-5.10/111-l-50.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-l-50.dts
-+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
-@@ -18,6 +18,13 @@
- 		reg = <0x00000000 0x20000000>;
- 	};
- 
-+	aliases {
-+		led-boot = &led_status_green;
-+		led-failsafe = &led_status_red;
-+		led-running = &led_status_green;
-+		led-upgrade = &led_status_red;
-+	};
-+
- 	chosen {
- 		bootargs = "console=ttyS0,115200n8";
- 		stdout-path = &uart0;
-@@ -95,12 +102,12 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		status_green {
-+		led_status_green: status_green {
- 			label = "l-50:green:status";
- 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- 		};
- 
--		status_red {
-+		led_status_red: status_red {
- 			label = "l-50:red:status";
- 			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
- 		};
-@@ -349,13 +356,8 @@
- 	};
- 
- 	partition@100000 {
--		label = "kernel-1";
--		reg = <0x00100000 0x00800000>;
--	};
--
--	partition@900000 {
--		label = "rootfs-1";
--		reg = <0x00900000 0x07100000>;
-+		label = "ubi";
-+		reg = <0x00100000 0x07900000>;
- 	};
- 
- 	partition@7a00000 {
diff --git a/target/linux/kirkwood/patches-5.10/112-sheevaplug.patch b/target/linux/kirkwood/patches-5.10/112-sheevaplug.patch
deleted file mode 100644
index d1ff9884a068..000000000000
--- a/target/linux/kirkwood/patches-5.10/112-sheevaplug.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
-@@ -78,13 +78,8 @@
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x400000>;
--	};
--
--	partition@500000 {
--		label = "root";
--		reg = <0x0500000 0x1fb00000>;
-+		label = "ubi";
-+		reg = <0x0100000 0x1ff00000>;
- 	};
- };
- 
---- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
-+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
-@@ -13,6 +13,13 @@
- 	model = "Globalscale Technologies SheevaPlug";
- 	compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_health;
-+		led-failsafe = &led_health;
-+		led-running = &led_health;
-+		led-upgrade = &led_health;
-+	};
-+
- 	ocp@f1000000 {
- 		mvsdio@90000 {
- 			pinctrl-0 = <&pmx_sdio>;
-@@ -28,10 +35,10 @@
- 		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
- 		pinctrl-names = "default";
- 
--		health {
-+		led_health: health {
- 			label = "sheevaplug:blue:health";
- 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
- 
- 		misc {
diff --git a/target/linux/kirkwood/patches-5.10/113-readynas_duo_v2.patch b/target/linux/kirkwood/patches-5.10/113-readynas_duo_v2.patch
deleted file mode 100644
index c6452c55a37c..000000000000
--- a/target/linux/kirkwood/patches-5.10/113-readynas_duo_v2.patch
+++ /dev/null
@@ -1,76 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
-+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
-@@ -19,6 +19,13 @@
- 		reg = <0x00000000 0x10000000>;
- 	};
- 
-+	aliases {
-+		led-boot = &led_power;
-+		led-failsafe = &led_power;
-+		led-running = &led_power;
-+		led-upgrade = &led_power;
-+	};
-+
- 	chosen {
- 		bootargs = "console=ttyS0,115200n8 earlyprintk";
- 		stdout-path = &uart0;
-@@ -115,7 +122,7 @@
- 			      &pmx_led_blue_backup >;
- 		pinctrl-names = "default";
- 
--		power_led {
-+		led_power: power_led {
- 			label = "status:blue:power_led";
- 			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
- 			default-state = "keep";
-@@ -129,11 +136,13 @@
- 		disk1_led {
- 			label = "status:blue:disk1_led";
- 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "ata1";
- 		};
- 
- 		disk2_led {
- 			label = "status:blue:disk2_led";
- 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "ata2";
- 		};
- 
- 		backup_led {
-@@ -150,7 +159,13 @@
- 
- 		power-button {
- 			label = "Power Button";
--			linux,code = <KEY_POWER>;
-+			/* Power button and INT pin from PHY are both connected
-+			 * to this GPIO. Every network restart causes PHY restart
-+			 * and button is pressed. It's difficult to use it as
-+			 * KEY_POWER without changes in kernel (or netifd) so
-+			 * the button is configured as regular one.
-+			 */
-+			linux,code = <BTN_1>;
- 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- 		};
- 
-@@ -208,18 +223,13 @@
- 	};
- 
- 	partition@200000 {
--		label = "uImage";
-+		label = "kernel";
- 		reg = <0x0200000 0x600000>;
- 	};
- 
- 	partition@800000 {
--		label = "minirootfs";
--		reg = <0x0800000 0x1000000>;
--	};
--
--	partition@1800000 {
--		label = "jffs2";
--		reg = <0x1800000 0x6800000>;
-+		label = "ubi";
-+		reg = <0x0800000 0x7800000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch
deleted file mode 100644
index 35db06572715..000000000000
--- a/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -116,6 +116,7 @@ config MACH_DOVE
- config MACH_KIRKWOOD
- 	bool "Marvell Kirkwood boards"
- 	depends on ARCH_MULTI_V5
-+	select ARCH_WANT_LIBATA_LEDS
- 	select CPU_FEROCEON
- 	select GPIOLIB
- 	select KIRKWOOD_CLK
diff --git a/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch
deleted file mode 100644
index 515bb21707e3..000000000000
--- a/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d
- 	return of_get_property(pp, "compatible", NULL);
- }
- 
-+static int mangled_rootblock;
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- 				  const struct mtd_partition **pparts,
- 				  struct mtd_part_parser_data *data)
-@@ -47,6 +49,7 @@ static int parse_fixed_partitions(struct
- 	struct mtd_partition *parts;
- 	struct device_node *mtd_node;
- 	struct device_node *ofpart_node;
-+	const char *owrtpart = "ubi";
- 	const char *partname;
- 	struct device_node *pp;
- 	int nr_parts, i, ret = 0;
-@@ -133,9 +136,15 @@ static int parse_fixed_partitions(struct
- 		parts[i].size = of_read_number(reg + a_cells, s_cells);
- 		parts[i].of_node = pp;
- 
--		partname = of_get_property(pp, "label", &len);
--		if (!partname)
--			partname = of_get_property(pp, "name", &len);
-+		if (mangled_rootblock && (i == mangled_rootblock)) {
-+			partname = owrtpart;
-+		} else {
-+			partname = of_get_property(pp, "label", &len);
-+
-+			if (!partname)
-+				partname = of_get_property(pp, "name", &len);
-+		}
-+
- 		parts[i].name = partname;
- 
- 		if (of_get_property(pp, "read-only", &len))
-@@ -252,6 +261,18 @@ static int __init ofpart_parser_init(voi
- 	return 0;
- }
- 
-+static int __init active_root(char *str)
-+{
-+	get_option(&str, &mangled_rootblock);
-+
-+	if (!mangled_rootblock)
-+		return 1;
-+
-+	return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- 	deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/kirkwood/patches-5.10/203-blackarmor-nas220.patch b/target/linux/kirkwood/patches-5.10/203-blackarmor-nas220.patch
deleted file mode 100644
index e04a28206a20..000000000000
--- a/target/linux/kirkwood/patches-5.10/203-blackarmor-nas220.patch
+++ /dev/null
@@ -1,99 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
-+++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
-@@ -17,6 +17,13 @@
- 	compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
- 		     "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_status_amber;
-+		led-failsafe = &led_status_amber;
-+		led-running = &led_status_blue;
-+		led-upgrade = &led_status_amber;
-+	};
-+
- 	memory { /* 128 MB */
- 		device_type = "memory";
- 		reg = <0x00000000 0x8000000>;
-@@ -36,14 +43,14 @@
- 		compatible = "gpio-keys";
- 
- 		reset {
--			label = "Reset";
--			linux,code = <KEY_POWER>;
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
- 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		button {
--			label = "Power";
--			linux,code = <KEY_SLEEP>;
-+		power {
-+			label = "Power Button";
-+			linux,code = <KEY_POWER>;
- 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
- 		};
- 	};
-@@ -51,11 +58,27 @@
- 	gpio-leds {
- 		compatible = "gpio-leds";
- 
--		blue-power {
-+		led_power_blue: power_blue {
- 			label = "nas220:blue:power";
- 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
-+
-+		disk_blue {
-+			label = "nas220:blue:disk";
-+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "disk-activity";
-+		};
-+
-+		led_status_blue: status_blue {
-+			label = "nas220:blue:status";
-+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		led_status_amber: status_amber {
-+			label = "nas220:amber:status";
-+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-+		};
- 	};
- 
- 	regulators {
-@@ -153,6 +176,33 @@
- 
- &nand {
- 	status = "okay";
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+
-+		partition@0 {
-+			label = "uboot";
-+			reg = <0x0 0xa0000>;
-+			read-only;
-+		};
-+
-+		partition@a0000 {
-+			label = "uboot-env";
-+			reg = <0xa0000 0x10000>;
-+			read-only;
-+		};
-+
-+		partition@b0000 {
-+			label = "reserved";
-+			reg = <0xb0000 0x10000>;
-+			read-only;
-+		};
-+
-+		partition@c0000 {
-+			label = "ubi";
-+			reg = <0xc0000 0x1e80000>;
-+		};
-+	};
- };
- 
- &mdio {
diff --git a/target/linux/kirkwood/patches-5.10/800-power-reset-linkstation-poweroff-prepare-for-new-dev.patch b/target/linux/kirkwood/patches-5.10/800-power-reset-linkstation-poweroff-prepare-for-new-dev.patch
deleted file mode 100644
index 4b4d03839aba..000000000000
--- a/target/linux/kirkwood/patches-5.10/800-power-reset-linkstation-poweroff-prepare-for-new-dev.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 11cab9f5cd9390cd83747e579957c8f5b807c09c Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Fri, 18 Jun 2021 12:37:27 +0200
-Subject: [PATCH 1/2] power: reset: linkstation-poweroff: prepare for new
- devices
-
-This commit prepare driver for another device support.
-
-New power_off_cfg structure describes two most important things: name of
-mdio bus and pointer to register setting function. It allow to add new
-device with different mdio bus node and other phy register config.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- drivers/power/reset/linkstation-poweroff.c | 35 ++++++++++++++++++----
- 1 file changed, 29 insertions(+), 6 deletions(-)
-
---- a/drivers/power/reset/linkstation-poweroff.c
-+++ b/drivers/power/reset/linkstation-poweroff.c
-@@ -29,11 +29,21 @@
- #define LED2_FORCE_ON					(0x8 << 8)
- #define LEDMASK						GENMASK(11,8)
- 
-+struct power_off_cfg {
-+	char *mdio_node_name;
-+	void (*phy_set_reg)(bool restart);
-+};
-+
- static struct phy_device *phydev;
-+static const struct power_off_cfg *cfg;
- 
--static void mvphy_reg_intn(u16 data)
-+static void linkstation_mvphy_reg_intn(bool restart)
- {
- 	int rc = 0, saved_page;
-+	u16 data = 0;
-+
-+	if(restart)
-+		data = MII_88E1318S_PHY_LED_TCR_FORCE_INT;
- 
- 	saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
- 	if (saved_page < 0)
-@@ -66,11 +76,16 @@ err:
- 		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
- }
- 
-+static const struct power_off_cfg linkstation_power_off_cfg = {
-+	.mdio_node_name = "mdio",
-+	.phy_set_reg = linkstation_mvphy_reg_intn,
-+};
-+
- static int linkstation_reboot_notifier(struct notifier_block *nb,
- 				       unsigned long action, void *unused)
- {
- 	if (action == SYS_RESTART)
--		mvphy_reg_intn(MII_88E1318S_PHY_LED_TCR_FORCE_INT);
-+		cfg->phy_set_reg(true);
- 
- 	return NOTIFY_DONE;
- }
-@@ -82,14 +97,18 @@ static struct notifier_block linkstation
- static void linkstation_poweroff(void)
- {
- 	unregister_reboot_notifier(&linkstation_reboot_nb);
--	mvphy_reg_intn(0);
-+	cfg->phy_set_reg(false);
- 
- 	kernel_restart("Power off");
- }
- 
- static const struct of_device_id ls_poweroff_of_match[] = {
--	{ .compatible = "buffalo,ls421d" },
--	{ .compatible = "buffalo,ls421de" },
-+	{ .compatible = "buffalo,ls421d",
-+	  .data = &linkstation_power_off_cfg,
-+	},
-+	{ .compatible = "buffalo,ls421de",
-+	  .data = &linkstation_power_off_cfg,
-+	},
- 	{ },
- };
- 
-@@ -97,13 +116,17 @@ static int __init linkstation_poweroff_i
- {
- 	struct mii_bus *bus;
- 	struct device_node *dn;
-+	const struct of_device_id *match;
- 
- 	dn = of_find_matching_node(NULL, ls_poweroff_of_match);
- 	if (!dn)
- 		return -ENODEV;
- 	of_node_put(dn);
- 
--	dn = of_find_node_by_name(NULL, "mdio");
-+	match = of_match_node(ls_poweroff_of_match, dn);
-+	cfg = match->data;
-+
-+	dn = of_find_node_by_name(NULL, cfg->mdio_node_name);
- 	if (!dn)
- 		return -ENODEV;
- 
diff --git a/target/linux/kirkwood/patches-5.10/801-power-reset-linkstation-poweroff-add-new-device.patch b/target/linux/kirkwood/patches-5.10/801-power-reset-linkstation-poweroff-add-new-device.patch
deleted file mode 100644
index a929aacfd034..000000000000
--- a/target/linux/kirkwood/patches-5.10/801-power-reset-linkstation-poweroff-add-new-device.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From a2d9c86df8d12646f5bf66920e4f1e6d940cfc62 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Fri, 18 Jun 2021 13:25:33 +0200
-Subject: [PATCH 2/2] power: reset: linkstation-poweroff: add new device
-
-This commit introduces support for NETGEAR ReadyNAS Duo v2.
-This device use bit 4 of LED[2:0] Polarity Control Register to indicate
-AC Power loss.
-
-For more details about AC loss detection in NETGEAR ReadyNAS Duo v2,
-please look at the file:
-RND_5.3.13_WW.src/u-boot/board/mv_feroceon/mv_hal/usibootup/usibootup.c
-from Netgear GPL sources.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- drivers/power/reset/linkstation-poweroff.c | 43 ++++++++++++++++++++++
- 1 file changed, 43 insertions(+)
-
---- a/drivers/power/reset/linkstation-poweroff.c
-+++ b/drivers/power/reset/linkstation-poweroff.c
-@@ -19,6 +19,7 @@
- #define MII_MARVELL_PHY_PAGE		22
- 
- #define MII_PHY_LED_CTRL		16
-+#define MII_PHY_LED_POL_CTRL		17
- #define MII_88E1318S_PHY_LED_TCR	18
- #define MII_88E1318S_PHY_WOL_CTRL	16
- #define MII_M1011_IEVENT		19
-@@ -29,6 +30,8 @@
- #define LED2_FORCE_ON					(0x8 << 8)
- #define LEDMASK						GENMASK(11,8)
- 
-+#define MII_88E1318S_PHY_LED_POL_LED2		BIT(4)
-+
- struct power_off_cfg {
- 	char *mdio_node_name;
- 	void (*phy_set_reg)(bool restart);
-@@ -76,11 +79,48 @@ err:
- 		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
- }
- 
-+static void readynas_mvphy_set_reg(bool restart)
-+{
-+	int rc = 0, saved_page;
-+	u16 data = 0;
-+
-+	if(restart)
-+		data = MII_88E1318S_PHY_LED_POL_LED2;
-+
-+	saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
-+	if (saved_page < 0)
-+		goto err;
-+
-+	/* Set the LED[2].0 Polarity bit to the required state */
-+	__phy_modify(phydev, MII_PHY_LED_POL_CTRL,
-+		     MII_88E1318S_PHY_LED_POL_LED2, data);
-+
-+	if (!data) {
-+
-+		/* If WOL was enabled and a magic packet was received before powering
-+		 * off, we won't be able to wake up by sending another magic packet.
-+		 * Clear WOL status.
-+		 */
-+		__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
-+		__phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
-+			       MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
-+	}
-+err:
-+	rc = phy_restore_page(phydev, saved_page, rc);
-+	if (rc < 0)
-+		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
-+}
-+
- static const struct power_off_cfg linkstation_power_off_cfg = {
- 	.mdio_node_name = "mdio",
- 	.phy_set_reg = linkstation_mvphy_reg_intn,
- };
- 
-+static const struct power_off_cfg readynas_power_off_cfg = {
-+	.mdio_node_name = "mdio-bus",
-+	.phy_set_reg = readynas_mvphy_set_reg,
-+};
-+
- static int linkstation_reboot_notifier(struct notifier_block *nb,
- 				       unsigned long action, void *unused)
- {
-@@ -109,6 +149,9 @@ static const struct of_device_id ls_powe
- 	{ .compatible = "buffalo,ls421de",
- 	  .data = &linkstation_power_off_cfg,
- 	},
-+	{ .compatible = "netgear,readynas-duo-v2",
-+	  .data = &readynas_power_off_cfg,
-+	},
- 	{ },
- };
- 
diff --git a/target/linux/lantiq/ase/config-5.10 b/target/linux/lantiq/ase/config-5.10
deleted file mode 100644
index 195e49df6920..000000000000
--- a/target/linux/lantiq/ase/config-5.10
+++ /dev/null
@@ -1,25 +0,0 @@
-CONFIG_ADM6996_PHY=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPSR1=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_HW_RANDOM=y
-# CONFIG_ISDN is not set
-CONFIG_LANTIQ_ETOP=y
-CONFIG_NLS=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SOC_AMAZON_SE=y
-CONFIG_SOC_TYPE_XWAY=y
-CONFIG_SWCONFIG=y
-CONFIG_TARGET_ISA_REV=1
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/lantiq/config-5.10 b/target/linux/lantiq/config-5.10
deleted file mode 100644
index c37a543e1e76..000000000000
--- a/target/linux/lantiq/config-5.10
+++ /dev/null
@@ -1,225 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y
-CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
-CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
-CONFIG_ARCH_HAS_UNCACHED_SEGMENT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_MEMREMAP_PROT=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_LOAD_STORE_LR=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
-CONFIG_DTC=y
-# CONFIG_DT_EASY50712 is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_EFI_EARLYCON=y
-CONFIG_FIXED_PHY=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_AUTOSELECT=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIO_MM_LANTIQ=y
-CONFIG_GPIO_STP_XWAY=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_COMPILER_H=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ASM_MODVERSIONS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FAST_GUP=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_VDSO=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PCI=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LANTIQ=y
-CONFIG_LANTIQ_DT_NONE=y
-# CONFIG_LANTIQ_ETOP is not set
-CONFIG_LANTIQ_WDT=y
-# CONFIG_LANTIQ_XRX200 is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_LANTIQ=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_BRNIMAGE_FW=y
-CONFIG_MTD_SPLIT_EVA_FW=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-# CONFIG_PCIE_LANTIQ is not set
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_LANTIQ_RCU_USB2=y
-# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_LANTIQ=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_XWAY=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_LANTIQ=y
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_LANTIQ=y
-CONFIG_SERIAL_LANTIQ_CONSOLE=y
-# CONFIG_SOC_AMAZON_SE is not set
-# CONFIG_SOC_FALCON is not set
-# CONFIG_SOC_XWAY is not set
-CONFIG_SPI=y
-CONFIG_SPI_LANTIQ_SSC=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_VPE_LOADER=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/lantiq/falcon/config-5.10 b/target/linux/lantiq/falcon/config-5.10
deleted file mode 100644
index 3041c65dbdcd..000000000000
--- a/target/linux/lantiq/falcon/config-5.10
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux"
-CONFIG_PINCTRL_FALCON=y
-CONFIG_SOC_FALCON=y
-CONFIG_SPI_FALCON=y
diff --git a/target/linux/lantiq/patches-5.10/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-5.10/0001-MIPS-lantiq-add-pcie-driver.patch
deleted file mode 100644
index 9068be5d4a10..000000000000
--- a/target/linux/lantiq/patches-5.10/0001-MIPS-lantiq-add-pcie-driver.patch
+++ /dev/null
@@ -1,5507 +0,0 @@
-From 6f933347d0b4ed02d9534f5fa07f7b99f13eeaa1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:12:28 +0200
-Subject: [PATCH 01/36] MIPS: lantiq: add pcie driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/Kconfig           |   10 +
- arch/mips/lantiq/xway/sysctrl.c    |    2 +
- arch/mips/pci/Makefile             |    2 +
- arch/mips/pci/fixup-lantiq-pcie.c  |   82 +++
- arch/mips/pci/fixup-lantiq.c       |    5 +-
- arch/mips/pci/ifxmips_pci_common.h |   57 ++
- arch/mips/pci/ifxmips_pcie.c       | 1099 ++++++++++++++++++++++++++++++
- arch/mips/pci/ifxmips_pcie.h       |  135 ++++
- arch/mips/pci/ifxmips_pcie_ar10.h  |  290 ++++++++
- arch/mips/pci/ifxmips_pcie_msi.c   |  392 +++++++++++
- arch/mips/pci/ifxmips_pcie_phy.c   |  478 +++++++++++++
- arch/mips/pci/ifxmips_pcie_pm.c    |  176 +++++
- arch/mips/pci/ifxmips_pcie_pm.h    |   36 +
- arch/mips/pci/ifxmips_pcie_reg.h   | 1001 +++++++++++++++++++++++++++
- arch/mips/pci/ifxmips_pcie_vr9.h   |  271 ++++++++
- arch/mips/pci/pci.c                |   25 +
- arch/mips/pci/pcie-lantiq.h        | 1305 ++++++++++++++++++++++++++++++++++++
- drivers/pci/pcie/aer/Kconfig       |    2 +-
- include/linux/pci.h                |    2 +
- include/linux/pci_ids.h            |    6 +
- 20 files changed, 5374 insertions(+), 2 deletions(-)
- create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c
- create mode 100644 arch/mips/pci/ifxmips_pci_common.h
- create mode 100644 arch/mips/pci/ifxmips_pcie.c
- create mode 100644 arch/mips/pci/ifxmips_pcie.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_ar10.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_msi.c
- create mode 100644 arch/mips/pci/ifxmips_pcie_phy.c
- create mode 100644 arch/mips/pci/ifxmips_pcie_pm.c
- create mode 100644 arch/mips/pci/ifxmips_pcie_pm.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_reg.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_vr9.h
- create mode 100644 arch/mips/pci/pcie-lantiq.h
-
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -20,6 +20,7 @@ config SOC_XWAY
- 	bool "XWAY"
- 	select SOC_TYPE_XWAY
- 	select HAVE_PCI
-+	select ARCH_SUPPORTS_MSI
- 	select MFD_SYSCON
- 	select MFD_CORE
- 
-@@ -52,4 +53,13 @@ config PCI_LANTIQ
- 	bool "PCI Support"
- 	depends on SOC_XWAY && PCI
- 
-+config PCIE_LANTIQ
-+	bool "PCIE Support"
-+	depends on SOC_XWAY && PCI
-+
-+config PCIE_LANTIQ_MSI
-+	bool
-+	depends on PCIE_LANTIQ && PCI_MSI
-+	default y
-+
- endif
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -43,6 +43,8 @@ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o
- obj-$(CONFIG_SOC_MT7620)	+= pci-mt7620.o
- obj-$(CONFIG_SOC_RT288X)	+= pci-rt2880.o
- obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
-+obj-$(CONFIG_PCIE_LANTIQ)	+= ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o
-+obj-$(CONFIG_PCIE_LANTIQ_MSI)	+= pcie-lantiq-msi.o
- obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
- obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
- obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
---- /dev/null
-+++ b/arch/mips/pci/fixup-lantiq-pcie.c
-@@ -0,0 +1,74 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_fixup_pcie.c
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe 
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_fixup_pcie.c
-+ \ingroup IFX_PCIE  
-+ \brief PCIe Fixup functions source file
-+*/
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+#include <linux/pci_ids.h>
-+
-+#include <lantiq_soc.h>
-+
-+#include "pcie-lantiq.h"
-+
-+static void
-+ifx_pcie_fixup_resource(struct pci_dev *dev)
-+{
-+    u32 reg;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
-+
-+    printk("%s: fixup host controller %s (%04x:%04x)\n", 
-+        __func__, pci_name(dev), dev->vendor, dev->device); 
-+
-+   /* Setup COMMAND register */
-+    reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* | 
-+          PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR;
-+    pci_write_config_word(dev, PCI_COMMAND, reg);
-+    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource);
-+
-+static void
-+ifx_pcie_rc_class_early_fixup(struct pci_dev *dev)
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
-+
-+    if (dev->devfn == PCI_DEVFN(0, 0) &&
-+        (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
-+
-+        dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff);
-+
-+        printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__);
-+    }
-+    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
-+    mdelay(10);
-+}
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE,
-+     ifx_pcie_rc_class_early_fixup);
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE,
-+     ifx_pcie_rc_class_early_fixup);
---- a/arch/mips/pci/fixup-lantiq.c
-+++ b/arch/mips/pci/fixup-lantiq.c
-@@ -6,12 +6,19 @@
- 
- #include <linux/of_irq.h>
- #include <linux/of_pci.h>
-+#include <linux/pci.h>
-+#include "ifxmips_pci_common.h"
- 
- int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL;
- int (*ltq_pci_plat_dev_init)(struct pci_dev *dev) = NULL;
- 
- int pcibios_plat_dev_init(struct pci_dev *dev)
- {
-+#ifdef CONFIG_PCIE_LANTIQ
-+	if (pci_find_capability(dev, PCI_CAP_ID_EXP))
-+		ifx_pcie_bios_plat_dev_init(dev);
-+#endif
-+
- 	if (ltq_pci_plat_arch_init)
- 		return ltq_pci_plat_arch_init(dev);
- 
-@@ -23,5 +30,10 @@ int pcibios_plat_dev_init(struct pci_dev
- 
- int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
- {
-+#ifdef CONFIG_PCIE_LANTIQ
-+	if (pci_find_capability(dev, PCI_CAP_ID_EXP))
-+		return ifx_pcie_bios_map_irq(dev, slot, pin);
-+#endif
-+
- 	return of_irq_parse_and_map_pci(dev, slot, pin);
- }
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pci_common.h
-@@ -0,0 +1,53 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pci_common.h
-+** PROJECT      : IFX UEIP
-+** MODULES      : PCI subsystem
-+**
-+** DATE         : 30 June 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    30 June,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+
-+#ifndef IFXMIPS_PCI_COMMON_H
-+#define IFXMIPS_PCI_COMMON_H
-+#include <linux/version.h>
-+/*!
-+ \defgroup IFX_PCI_COM  IFX PCI/PCIe common parts for OS integration  
-+ \brief  PCI/PCIe common parts
-+*/
-+
-+/*!
-+ \defgroup IFX_PCI_COM_OS OS APIs
-+ \ingroup IFX_PCI_COM
-+ \brief PCI/PCIe bus driver OS interface functions
-+*/
-+/*!
-+  \file ifxmips_pci_common.h
-+  \ingroup IFX_PCI_COM
-+  \brief PCI/PCIe bus driver common OS header file
-+*/
-+#define IFX_PCI_CONST const
-+#ifdef CONFIG_IFX_PCI
-+extern int ifx_pci_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin);
-+extern int ifx_pci_bios_plat_dev_init(struct pci_dev *dev);
-+#endif /* COFNIG_IFX_PCI */
-+
-+#ifdef CONFIG_PCIE_LANTIQ
-+extern int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin);
-+extern int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev);
-+#endif
-+
-+#endif /* IFXMIPS_PCI_COMMON_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie.c
-@@ -0,0 +1,1092 @@
-+/*
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ *
-+ *  Copyright (C) 2009 Lei Chuanhua <chuanhua.lei@infineon.com>
-+ *  Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <asm/paccess.h>
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+#include <linux/module.h>
-+
-+#include "ifxmips_pcie.h"
-+#include "ifxmips_pcie_reg.h"
-+
-+/* Enable 32bit io due to its mem mapped io nature */
-+#define IFX_PCIE_ERROR_INT
-+#define IFX_PCIE_IO_32BIT
-+
-+#define IFX_PCIE_IR                     (INT_NUM_IM4_IRL0 + 25)
-+#define IFX_PCIE_INTA                   (INT_NUM_IM4_IRL0 + 8)
-+#define IFX_PCIE_INTB                   (INT_NUM_IM4_IRL0 + 9)
-+#define IFX_PCIE_INTC                   (INT_NUM_IM4_IRL0 + 10)
-+#define IFX_PCIE_INTD                   (INT_NUM_IM4_IRL0 + 11)
-+#define MS(_v, _f)  (((_v) & (_f)) >> _f##_S)
-+#define SM(_v, _f)  (((_v) << _f##_S) & (_f))
-+#define IFX_REG_SET_BIT(_f, _r) \
-+	IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r))
-+
-+#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10
-+
-+static DEFINE_SPINLOCK(ifx_pcie_lock);
-+
-+u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
-+
-+static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
-+    {
-+        .ir_irq = {
-+            .irq  = IFX_PCIE_IR,
-+            .name = "ifx_pcie_rc0",
-+        },
-+
-+        .legacy_irq = {
-+            {
-+                .irq_bit = PCIE_IRN_INTA,
-+                .irq     = IFX_PCIE_INTA,
-+            },
-+            {
-+                .irq_bit = PCIE_IRN_INTB,
-+                .irq     = IFX_PCIE_INTB,
-+            },
-+            {
-+                .irq_bit = PCIE_IRN_INTC,
-+                .irq     = IFX_PCIE_INTC,
-+            },
-+            {
-+                .irq_bit = PCIE_IRN_INTD,
-+                .irq     = IFX_PCIE_INTD,
-+            },
-+        },
-+    },
-+
-+};
-+
-+void ifx_pcie_debug(const char *fmt, ...)
-+{
-+	static char buf[256] = {0};      /* XXX */
-+	va_list ap;
-+
-+	va_start(ap, fmt);
-+	vsnprintf(buf, sizeof(buf), fmt, ap);
-+	va_end(ap);
-+
-+	printk("%s", buf);
-+}
-+
-+
-+static inline int pcie_ltssm_enable(int pcie_port)
-+{
-+	int i;
-+
-+	/* Enable LTSSM */
-+	IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port));
-+
-+	/* Wait for the link to come up */
-+	for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) {
-+		if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING))
-+			return 0;
-+		udelay(10);
-+	}
-+
-+	printk("%s link timeout!!!!!\n", __func__);
-+	return -1;
-+}
-+
-+static inline void pcie_status_register_clear(int pcie_port)
-+{
-+	IFX_REG_W32(0, PCIE_RC_DR(pcie_port));
-+	IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port));
-+	IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port));
-+	IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port));
-+	IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port));
-+	IFX_REG_W32(0, PCIE_RSTS(pcie_port));
-+	IFX_REG_W32(0, PCIE_UES_R(pcie_port));
-+	IFX_REG_W32(0, PCIE_UEMR(pcie_port));
-+	IFX_REG_W32(0, PCIE_UESR(pcie_port));
-+	IFX_REG_W32(0, PCIE_CESR(pcie_port));
-+	IFX_REG_W32(0, PCIE_CEMR(pcie_port));
-+	IFX_REG_W32(0, PCIE_RESR(pcie_port));
-+	IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port));
-+	IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port));
-+	IFX_REG_W32(0, PCIE_TPFCS(pcie_port));
-+	IFX_REG_W32(0, PCIE_TNPFCS(pcie_port));
-+	IFX_REG_W32(0, PCIE_TCFCS(pcie_port));
-+	IFX_REG_W32(0, PCIE_QSR(pcie_port));
-+	IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port));
-+}
-+
-+static inline int ifx_pcie_link_up(int pcie_port)
-+{
-+    return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0;
-+}
-+
-+
-+static inline void pcie_mem_io_setup(int pcie_port)
-+{
-+    u32 reg;
-+    /*
-+     * BAR[0:1] readonly register 
-+     * RC contains only minimal BARs for packets mapped to this device 
-+     * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that
-+     * reside on the downstream side fo the bridge.
-+     */
-+    reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR)
-+        | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR);
-+
-+    IFX_REG_W32(reg, PCIE_MBML(pcie_port));
-+
-+
-+#ifdef IFX_PCIE_PREFETCH_MEM_64BIT
-+    reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_PMBL_END_ADDR)
-+        | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_PMBL_UPPER_12BIT)
-+        | PCIE_PMBL_64BIT_ADDR;
-+    IFX_REG_W32(reg, PCIE_PMBL(pcie_port));
-+
-+    /* Must configure upper 32bit */
-+    IFX_REG_W32(0, PCIE_PMBU32(pcie_port));
-+    IFX_REG_W32(0, PCIE_PMLU32(pcie_port));
-+#else
-+    /* PCIe_PBML, same as MBML */
-+    IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port));
-+#endif 
-+
-+    /* IO Address Range */
-+    reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR)
-+        | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR);
-+#ifdef IFX_PCIE_IO_32BIT    
-+    reg |= PCIE_IOBLSECS_32BIT_IO_ADDR;
-+#endif /* IFX_PCIE_IO_32BIT */
-+    IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port));
-+
-+#ifdef IFX_PCIE_IO_32BIT
-+    reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT)
-+        | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE);
-+    IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port));
-+
-+#endif /* IFX_PCIE_IO_32BIT */
-+}
-+
-+static inline void
-+pcie_device_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Device capability register, set up Maximum payload size */
-+    reg = IFX_REG_R32(PCIE_DCAP(pcie_port));
-+    reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT;
-+    reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE);
-+
-+    /* Only available for EP */
-+    reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY);
-+    IFX_REG_W32(reg, PCIE_DCAP(pcie_port));
-+
-+    /* Device control and status register */
-+    /* Set Maximum Read Request size for the device as a Requestor */
-+    reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port));
-+
-+    /* 
-+     * Request size can be larger than the MPS used, but the completions returned 
-+     * for the read will be bounded by the MPS size.
-+     * In our system, Max request size depends on AHB burst size. It is 64 bytes.
-+     * but we set it as 128 as minimum one.
-+     */
-+    reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE)
-+            | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE);
-+
-+    /* Enable relaxed ordering, no snoop, and all kinds of errors */
-+    reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN;
-+
-+    IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port));
-+}
-+
-+static inline void
-+pcie_link_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /*
-+     * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM 
-+     * L0s is reported during link training via TS1 order set by N_FTS
-+     */
-+    reg = IFX_REG_R32(PCIE_LCAP(pcie_port));
-+    reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY;
-+    reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY);
-+    IFX_REG_W32(reg, PCIE_LCAP(pcie_port));
-+
-+    /* Link control and status register */
-+    reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-+
-+    /* Link Enable, ASPM enabled  */
-+    reg &= ~PCIE_LCTLSTS_LINK_DISABLE;
-+
-+#ifdef CONFIG_PCIEASPM
-+    /*  
-+     * We use the same physical reference clock that the platform provides on the connector 
-+     * It paved the way for ASPM to calculate the new exit Latency
-+     */
-+    reg |= PCIE_LCTLSTS_SLOT_CLK_CFG;
-+    reg |= PCIE_LCTLSTS_COM_CLK_CFG;
-+    /*
-+     * We should disable ASPM by default except that we have dedicated power management support
-+     * Enable ASPM will cause the system hangup/instability, performance degration
-+     */
-+    reg |= PCIE_LCTLSTS_ASPM_ENABLE;
-+#else
-+    reg &= ~PCIE_LCTLSTS_ASPM_ENABLE;
-+#endif /* CONFIG_PCIEASPM */
-+
-+    /* 
-+     * The maximum size of any completion with data packet is bounded by the MPS setting 
-+     * in  device control register 
-+     */
-+
-+    /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */
-+    reg &= ~ PCIE_LCTLSTS_RCB128;
-+
-+    IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
-+}
-+
-+static inline void pcie_error_setup(int pcie_port)
-+{
-+	u32 reg;
-+
-+	/* 
-+	* Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone 
-+	* Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE 
-+	*/
-+	reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
-+	reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE;
-+
-+	IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
-+
-+	/* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */
-+	reg = IFX_REG_R32(PCIE_UEMR(pcie_port));
-+	reg &= ~PCIE_ALL_UNCORRECTABLE_ERR;
-+	IFX_REG_W32(reg, PCIE_UEMR(pcie_port));
-+
-+	/* Uncorrectable Error Severity Register, ALL errors are FATAL */
-+	IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port));
-+
-+	/* Correctable Error Mask Register, unmask <enable> all bits */
-+	reg = IFX_REG_R32(PCIE_CEMR(pcie_port));
-+	reg &= ~PCIE_CORRECTABLE_ERR;
-+	IFX_REG_W32(reg, PCIE_CEMR(pcie_port));
-+
-+	/* Advanced Error Capabilities and Control Registr */
-+	reg = IFX_REG_R32(PCIE_AECCR(pcie_port));
-+	reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN;
-+	IFX_REG_W32(reg, PCIE_AECCR(pcie_port));
-+
-+	/* Root Error Command Register, Report all types of errors */
-+	reg = IFX_REG_R32(PCIE_RECR(pcie_port));
-+	reg |= PCIE_RECR_ERR_REPORT_EN;
-+	IFX_REG_W32(reg, PCIE_RECR(pcie_port));
-+
-+	/* Clear the Root status register */
-+	reg = IFX_REG_R32(PCIE_RESR(pcie_port));
-+	IFX_REG_W32(reg, PCIE_RESR(pcie_port));
-+}
-+
-+static inline void pcie_port_logic_setup(int pcie_port)
-+{
-+	u32 reg;
-+
-+	/* FTS number, default 12, increase to 63, may increase time from/to L0s to L0  */
-+	reg = IFX_REG_R32(PCIE_AFR(pcie_port));
-+	reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM);
-+	reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM)
-+		| SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM);
-+	/* L0s and L1 entry latency */
-+	reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY);
-+	reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY)
-+		| SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY);
-+	IFX_REG_W32(reg, PCIE_AFR(pcie_port));
-+
-+
-+	/* Port Link Control Register */
-+	reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
-+	reg |= PCIE_PLCR_DLL_LINK_EN;  /* Enable the DLL link */
-+	IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
-+
-+	/* Lane Skew Register */
-+	reg = IFX_REG_R32(PCIE_LSR(pcie_port));
-+	/* Enable ACK/NACK and FC */
-+	reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE);
-+	IFX_REG_W32(reg, PCIE_LSR(pcie_port));
-+
-+	/* Symbol Timer Register and Filter Mask Register 1 */
-+	reg = IFX_REG_R32(PCIE_STRFMR(pcie_port));
-+
-+	/* Default SKP interval is very accurate already, 5us */
-+	/* Enable IO/CFG transaction */
-+	reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE;
-+	/* Disable FC WDT */
-+	reg &= ~PCIE_STRFMR_FC_WDT_DISABLE;
-+	IFX_REG_W32(reg, PCIE_STRFMR(pcie_port));
-+
-+	/* Filter Masker Register 2 */
-+	reg = IFX_REG_R32(PCIE_FMR2(pcie_port));
-+	reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1;
-+	IFX_REG_W32(reg, PCIE_FMR2(pcie_port));
-+
-+	/* VC0 Completion Receive Queue Control Register */
-+	reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port));
-+	reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE;
-+	reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE);
-+	IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port));
-+}
-+
-+static inline void pcie_rc_cfg_reg_setup(int pcie_port)
-+{
-+	u32 reg;
-+
-+	/* Disable LTSSM */
-+	IFX_REG_W32(0, PCIE_RC_CCR(pcie_port)); /* Disable LTSSM */
-+
-+	pcie_mem_io_setup(pcie_port);
-+
-+	/* XXX, MSI stuff should only apply to EP */
-+	/* MSI Capability: Only enable 32-bit addresses */
-+	reg = IFX_REG_R32(PCIE_MCAPR(pcie_port));
-+	reg &= ~PCIE_MCAPR_ADDR64_CAP;
-+
-+	reg |= PCIE_MCAPR_MSI_ENABLE;
-+
-+	/* Disable multiple message */
-+	reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE);
-+	IFX_REG_W32(reg, PCIE_MCAPR(pcie_port));
-+
-+
-+	/* Enable PME, Soft reset enabled */
-+	reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port));
-+	reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST;
-+	IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port));
-+
-+	/* setup the bus */
-+	reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM);
-+	IFX_REG_W32(reg, PCIE_BNR(pcie_port));
-+
-+
-+	pcie_device_setup(pcie_port);
-+	pcie_link_setup(pcie_port);
-+	pcie_error_setup(pcie_port);
-+
-+	/* Root control and capabilities register */
-+	reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port));
-+	reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN;
-+	IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port));
-+
-+	/* Port VC Capability Register 2 */
-+	reg = IFX_REG_R32(PCIE_PVC2(pcie_port));
-+	reg &= ~PCIE_PVC2_VC_ARB_WRR;
-+	reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR;
-+	IFX_REG_W32(reg, PCIE_PVC2(pcie_port));
-+
-+	/* VC0 Resource Capability Register */
-+	reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port));
-+	reg &= ~PCIE_VC0_RC_REJECT_SNOOP;
-+	IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port));
-+
-+	pcie_port_logic_setup(pcie_port);
-+}
-+
-+static int ifx_pcie_wait_phy_link_up(int pcie_port)
-+{
-+#define IFX_PCIE_PHY_LINK_UP_TIMEOUT  1000 /* XXX, tunable */
-+    int i;
-+
-+    /* Wait for PHY link is up */
-+    for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) {
-+        if (ifx_pcie_link_up(pcie_port)) {
-+            break;
-+        }
-+        udelay(100);
-+    }
-+    if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) {
-+        printk(KERN_ERR "%s timeout\n", __func__);
-+        return -1;
-+    }
-+
-+    /* Check data link up or not */
-+    if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
-+        printk(KERN_ERR "%s DLL link is still down\n", __func__);
-+        return -1;
-+    }
-+
-+    /* Check Data link active or not */
-+    if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
-+        printk(KERN_ERR "%s DLL is not active\n", __func__);
-+        return -1;
-+    }
-+    return 0;
-+}
-+
-+static inline int pcie_app_loigc_setup(int pcie_port)
-+{
-+	/* supress ahb bus errrors */
-+	IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port));
-+
-+	/* Pull PCIe EP out of reset */
-+	pcie_device_rst_deassert(pcie_port);
-+
-+	/* Start LTSSM training between RC and EP */
-+	pcie_ltssm_enable(pcie_port);
-+
-+	/* Check PHY status after enabling LTSSM */
-+	if (ifx_pcie_wait_phy_link_up(pcie_port) != 0)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+/*
-+ * The numbers below are directly from the PCIe spec table 3-4/5. 
-+ */
-+static inline void pcie_replay_time_update(int pcie_port)
-+{
-+	u32 reg;
-+	int nlw;
-+	int rtl;
-+
-+	reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-+
-+	nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH);
-+	switch (nlw) {
-+	case PCIE_MAX_LENGTH_WIDTH_X1:
-+		rtl = 1677;
-+		break;
-+	case PCIE_MAX_LENGTH_WIDTH_X2:
-+		rtl = 867;
-+		break;
-+	case PCIE_MAX_LENGTH_WIDTH_X4:
-+		rtl = 462;
-+		break;
-+	case PCIE_MAX_LENGTH_WIDTH_X8:
-+		rtl = 258;
-+		break;
-+	default:
-+		rtl = 1677;
-+		break;
-+	}
-+	reg = IFX_REG_R32(PCIE_ALTRT(pcie_port));
-+	reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT;
-+	reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT);
-+	IFX_REG_W32(reg, PCIE_ALTRT(pcie_port));
-+}
-+
-+/*
-+ * Table 359 Enhanced Configuration Address Mapping1)
-+ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1
-+ * Memory Address PCI Express Configuration Space
-+ * A[(20+n-1):20] Bus Number 1 < n < 8
-+ * A[19:15] Device Number
-+ * A[14:12] Function Number
-+ * A[11:8] Extended Register Number
-+ * A[7:2] Register Number
-+ * A[1:0] Along with size of the access, used to generate Byte Enables
-+ * For VR9, only the address bits [22:0] are mapped to the configuration space:
-+ * . Address bits [22:20] select the target bus (1-of-8)1)
-+ * . Address bits [19:15] select the target device (1-of-32) on the bus
-+ * . Address bits [14:12] select the target function (1-of-8) within the device.
-+ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space
-+ * . Address bits [1:0] define the start byte location within the selected dword.
-+ */
-+static inline u32 pcie_bus_addr(u8 bus_num, u16 devfn, int where)
-+{
-+	u32 addr;
-+	u8  bus;
-+
-+	if (!bus_num) {
-+		/* type 0 */
-+		addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3);
-+	} else {
-+		bus = bus_num;
-+		/* type 1, only support 8 buses  */
-+		addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) |
-+			((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3);
-+	}
-+	return addr;
-+}
-+
-+static int pcie_valid_config(int pcie_port, int bus, int dev)
-+{
-+	/* RC itself */
-+	if ((bus == 0) && (dev == 0)) {
-+		return 1;
-+	}
-+
-+	/* No physical link */
-+	if (!ifx_pcie_link_up(pcie_port)) {
-+		return 0;
-+	}
-+
-+	/* Bus zero only has RC itself
-+	* XXX, check if EP will be integrated 
-+	*/
-+	if ((bus == 0) && (dev != 0)) {
-+		return 0;
-+	}
-+
-+	/* Maximum 8 buses supported for VRX */
-+	if (bus > 9) {
-+		return 0;
-+	}
-+
-+	/* 
-+	 * PCIe is PtP link, one bus only supports only one device 
-+	 * except bus zero and PCIe switch which is virtual bus device
-+	 * The following two conditions really depends on the system design
-+	 * and attached the device.
-+	 * XXX, how about more new switch
-+	*/
-+	if ((bus == 1) && (dev != 0)) {
-+		return 0;
-+	}
-+
-+	if ((bus >= 3) && (dev != 0)) {
-+		return 0;
-+	}
-+	return 1;
-+}
-+
-+static inline u32 ifx_pcie_cfg_rd(int pcie_port, u32 reg)
-+{
-+    return IFX_REG_R32((volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, u32 val)
-+{
-+    IFX_REG_W32( val, (volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static inline u32 ifx_pcie_rc_cfg_rd(int pcie_port, u32 reg)
-+{
-+    return IFX_REG_R32((volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, u32 val)
-+{
-+	IFX_REG_W32(val, (volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+u32 ifx_pcie_bus_enum_read_hack(int where, u32 value)
-+{
-+	u32 tvalue = value;
-+
-+	if (where == PCI_PRIMARY_BUS) {
-+		u8 primary, secondary, subordinate;
-+
-+		primary = tvalue & 0xFF;
-+		secondary = (tvalue >> 8) & 0xFF;
-+		subordinate = (tvalue >> 16) & 0xFF;
-+		primary += pcibios_1st_host_bus_nr();
-+		secondary += pcibios_1st_host_bus_nr();
-+		subordinate += pcibios_1st_host_bus_nr();
-+		tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16);
-+	}
-+	return tvalue;
-+}
-+
-+u32 ifx_pcie_bus_enum_write_hack(int where, u32 value)
-+{
-+    u32 tvalue = value;
-+
-+    if (where == PCI_PRIMARY_BUS) {
-+        u8 primary, secondary, subordinate;
-+
-+        primary = tvalue & 0xFF;
-+        secondary = (tvalue >> 8) & 0xFF;
-+        subordinate = (tvalue >> 16) & 0xFF;
-+        if (primary > 0 && primary != 0xFF) {
-+            primary -= pcibios_1st_host_bus_nr();
-+        }
-+
-+        if (secondary > 0 && secondary != 0xFF) {
-+            secondary -= pcibios_1st_host_bus_nr();
-+        }
-+        if (subordinate > 0 && subordinate != 0xFF) {
-+            subordinate -= pcibios_1st_host_bus_nr();
-+        }
-+        tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16);
-+    }
-+    else if (where == PCI_SUBORDINATE_BUS) {
-+        u8 subordinate = tvalue & 0xFF;
-+
-+        subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0;
-+        tvalue = subordinate;
-+    }
-+    return tvalue;
-+}
-+
-+static int ifx_pcie_read_config(struct pci_bus *bus, u32 devfn,
-+				int where, int size, u32 *value)
-+{
-+    u32 data = 0;
-+    int bus_number = bus->number;
-+    static const u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};
-+    int ret = PCIBIOS_SUCCESSFUL;
-+    struct ifx_pci_controller *ctrl = bus->sysdata;
-+    int pcie_port = ctrl->port;
-+
-+    if (unlikely(size != 1 && size != 2 && size != 4)){
-+        ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+        goto out;
-+    }
-+
-+    /* Make sure the address is aligned to natural boundary */
-+    if (unlikely(((size - 1) & where))) {
-+        ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+        goto out;
-+    }
-+
-+    /* 
-+     * If we are second controller, we have to cheat OS so that it assume 
-+     * its bus number starts from 0 in host controller
-+     */
-+    bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
-+
-+    /* 
-+     * We need to force the bus number to be zero on the root 
-+     * bus. Linux numbers the 2nd root bus to start after all 
-+     * busses on root 0. 
-+     */ 
-+    if (bus->parent == NULL) {
-+        bus_number = 0; 
-+    }
-+
-+    /* 
-+     * PCIe only has a single device connected to it. It is 
-+     * always device ID 0. Don't bother doing reads for other 
-+     * device IDs on the first segment. 
-+     */ 
-+    if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) {
-+        ret = PCIBIOS_FUNC_NOT_SUPPORTED;
-+        goto out; 
-+    }
-+
-+    if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
-+        *value = 0xffffffff;
-+        ret = PCIBIOS_DEVICE_NOT_FOUND;
-+        goto out;
-+    }
-+
-+    PCIE_IRQ_LOCK(ifx_pcie_lock);
-+    if (bus_number == 0) { /* RC itself */
-+        u32 t;
-+
-+        t = (where & ~3);
-+        data = ifx_pcie_rc_cfg_rd(pcie_port, t);
-+    } else {
-+        u32 addr = pcie_bus_addr(bus_number, devfn, where);
-+
-+        data = ifx_pcie_cfg_rd(pcie_port, addr);
-+    #ifdef CONFIG_IFX_PCIE_HW_SWAP
-+            data = le32_to_cpu(data);
-+    #endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+    }
-+    /* To get a correct PCI topology, we have to restore the bus number to OS */
-+    data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1);
-+
-+    PCIE_IRQ_UNLOCK(ifx_pcie_lock);
-+
-+    *value = (data >> (8 * (where & 3))) & mask[size & 7];
-+out:
-+    return ret;
-+}
-+
-+static u32 ifx_pcie_size_to_value(int where, int size, u32 data, u32 value)
-+{
-+	u32 shift;
-+	u32 tdata = data;
-+
-+	switch (size) {
-+	case 1:
-+		shift = (where & 0x3) << 3;
-+		tdata &= ~(0xffU << shift);
-+		tdata |= ((value & 0xffU) << shift);
-+		break;
-+	case 2:
-+		shift = (where & 3) << 3;
-+		tdata &= ~(0xffffU << shift);
-+		tdata |= ((value & 0xffffU) << shift);
-+		break;
-+	case 4:
-+		tdata = value;
-+		break;
-+	}
-+	return tdata;
-+}
-+
-+static int ifx_pcie_write_config(struct pci_bus *bus, u32 devfn,
-+				int where, int size, u32 value)
-+{
-+	int bus_number = bus->number;
-+	int ret = PCIBIOS_SUCCESSFUL;
-+	struct ifx_pci_controller *ctrl = bus->sysdata;
-+	int pcie_port = ctrl->port;
-+	u32 tvalue = value;
-+	u32 data;
-+
-+	/* Make sure the address is aligned to natural boundary */
-+	if (unlikely(((size - 1) & where))) {
-+		ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+		goto out;
-+	}
-+	/* 
-+	* If we are second controller, we have to cheat OS so that it assume 
-+	* its bus number starts from 0 in host controller
-+	*/
-+	bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
-+
-+	/* 
-+	* We need to force the bus number to be zero on the root 
-+	* bus. Linux numbers the 2nd root bus to start after all 
-+	* busses on root 0. 
-+	*/ 
-+	if (bus->parent == NULL) {
-+		bus_number = 0; 
-+	}
-+
-+	if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
-+		ret = PCIBIOS_DEVICE_NOT_FOUND;
-+		goto out;
-+	}
-+
-+	/* XXX, some PCIe device may need some delay */
-+	PCIE_IRQ_LOCK(ifx_pcie_lock);
-+
-+	/* 
-+	* To configure the correct bus topology using native way, we have to cheat Os so that
-+	* it can configure the PCIe hardware correctly.
-+	*/
-+	tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0);
-+
-+	if (bus_number == 0) { /* RC itself */
-+		u32 t;
-+
-+		t = (where & ~3);
-+		data = ifx_pcie_rc_cfg_rd(pcie_port, t);
-+
-+		data = ifx_pcie_size_to_value(where, size, data, tvalue);
-+
-+		ifx_pcie_rc_cfg_wr(pcie_port, t, data);
-+	} else {
-+		u32 addr = pcie_bus_addr(bus_number, devfn, where);
-+
-+		data = ifx_pcie_cfg_rd(pcie_port, addr);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+		data = le32_to_cpu(data);
-+#endif
-+
-+		data = ifx_pcie_size_to_value(where, size, data, tvalue);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+		data = cpu_to_le32(data);
-+#endif
-+		ifx_pcie_cfg_wr(pcie_port, addr, data);
-+	}
-+	PCIE_IRQ_UNLOCK(ifx_pcie_lock);
-+out:
-+	return ret;
-+}
-+
-+static struct resource ifx_pcie_io_resource = {
-+	.name	= "PCIe0 I/O space",
-+	.start	= PCIE_IO_PHY_BASE,
-+	.end	= PCIE_IO_PHY_END,
-+	.flags	= IORESOURCE_IO,
-+};
-+
-+static struct resource ifx_pcie_mem_resource = {
-+	.name	= "PCIe0 Memory space",
-+	.start	= PCIE_MEM_PHY_BASE,
-+	.end	= PCIE_MEM_PHY_END,
-+	.flags	= IORESOURCE_MEM,
-+};
-+
-+static struct pci_ops ifx_pcie_ops = {
-+	.read	= ifx_pcie_read_config,
-+	.write	= ifx_pcie_write_config,
-+};
-+
-+static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = {
-+    {
-+        .pcic = {
-+            .pci_ops      = &ifx_pcie_ops,
-+            .mem_resource = &ifx_pcie_mem_resource,
-+            .io_resource  = &ifx_pcie_io_resource,
-+         },
-+         .port = IFX_PCIE_PORT0,
-+    },
-+};
-+
-+#ifdef IFX_PCIE_ERROR_INT
-+
-+static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id)
-+{
-+	struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id;
-+	int pcie_port = ctrl->port;
-+	u32 reg;
-+
-+	pr_debug("PCIe RC error intr %d\n", irq);
-+	reg = IFX_REG_R32(PCIE_IRNCR(pcie_port));
-+	reg &= PCIE_RC_CORE_COMBINED_INT;
-+	IFX_REG_W32(reg, PCIE_IRNCR(pcie_port));
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int
-+pcie_rc_core_int_init(int pcie_port)
-+{
-+	int ret;
-+
-+	/* Enable core interrupt */
-+	IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port));
-+
-+	/* Clear it first */
-+	IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port));
-+	ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, 0,
-+		pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]);
-+	if (ret)
-+		printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR);
-+
-+	return ret;
-+}
-+#endif
-+
-+int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	u32 irq_bit = 0;
-+	int irq = 0;
-+	struct ifx_pci_controller *ctrl = dev->bus->sysdata;
-+	int pcie_port = ctrl->port;
-+
-+	printk("%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin);
-+
-+	if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) {
-+		printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin);
-+		return -1;
-+	}
-+
-+	/* Pin index so minus one */
-+	irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit;
-+	irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq;
-+	IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port));
-+	IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port));
-+	printk("%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq);
-+	return irq;
-+}
-+
-+int  ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
-+{
-+    u16 config;
-+#ifdef IFX_PCIE_ERROR_INT
-+    u32 dconfig; 
-+    int pos;
-+#endif
-+
-+    /* Enable reporting System errors and parity errors on all devices */ 
-+    /* Enable parity checking and error reporting */ 
-+    pci_read_config_word(dev, PCI_COMMAND, &config);
-+    config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE |
-+          PCI_COMMAND_FAST_BACK*/;
-+    pci_write_config_word(dev, PCI_COMMAND, config);
-+
-+    if (dev->subordinate) {
-+        /* Set latency timers on sub bridges */
-+        pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */
-+        /* More bridge error detection */
-+        pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
-+        config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
-+        pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
-+    }
-+#ifdef IFX_PCIE_ERROR_INT
-+    /* Enable the PCIe normal error reporting */
-+    pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-+    if (pos) {
-+
-+        /* Disable system error generation in response to error messages */
-+        pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config);
-+        config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE);
-+        pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config);
-+
-+        /* Clear PCIE Capability's Device Status */
-+        pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config);
-+        pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config);
-+
-+        /* Update Device Control */ 
-+        pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
-+        /* Correctable Error Reporting */
-+        config |= PCI_EXP_DEVCTL_CERE;
-+        /* Non-Fatal Error Reporting */
-+        config |= PCI_EXP_DEVCTL_NFERE;
-+        /* Fatal Error Reporting */
-+        config |= PCI_EXP_DEVCTL_FERE;
-+        /* Unsupported Request */
-+        config |= PCI_EXP_DEVCTL_URRE;
-+        pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
-+    }
-+
-+    /* Find the Advanced Error Reporting capability */
-+    pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
-+    if (pos) {
-+        /* Clear Uncorrectable Error Status */ 
-+        pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig);
-+        pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig);
-+        /* Enable reporting of all uncorrectable errors */
-+        /* Uncorrectable Error Mask - turned on bits disable errors */
-+        pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
-+        /* 
-+        * Leave severity at HW default. This only controls if 
-+        * errors are reported as uncorrectable or 
-+        * correctable, not if the error is reported. 
-+        */ 
-+        /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
-+        /* Clear Correctable Error Status */
-+        pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
-+        pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
-+        /* Enable reporting of all correctable errors */
-+        /* Correctable Error Mask - turned on bits disable errors */
-+        pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
-+        /* Advanced Error Capabilities */ 
-+        pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
-+        /* ECRC Generation Enable */
-+        if (dconfig & PCI_ERR_CAP_ECRC_GENC) {
-+            dconfig |= PCI_ERR_CAP_ECRC_GENE;
-+        }
-+        /* ECRC Check Enable */
-+        if (dconfig & PCI_ERR_CAP_ECRC_CHKC) {
-+            dconfig |= PCI_ERR_CAP_ECRC_CHKE;
-+        }
-+        pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
-+
-+        /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
-+        /* Enable Root Port's interrupt in response to error messages */
-+        pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
-+              PCI_ERR_ROOT_CMD_COR_EN |
-+              PCI_ERR_ROOT_CMD_NONFATAL_EN |
-+              PCI_ERR_ROOT_CMD_FATAL_EN); 
-+        /* Clear the Root status register */
-+        pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
-+        pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
-+    }
-+#endif /* IFX_PCIE_ERROR_INT */
-+    /* WAR, only 128 MRRS is supported, force all EPs to support this value */
-+    pcie_set_readrq(dev, 128);
-+    return 0;
-+}
-+
-+static int
-+pcie_rc_initialize(int pcie_port)
-+{
-+	int i;
-+#define IFX_PCIE_PHY_LOOP_CNT  5
-+
-+	pcie_rcu_endian_setup(pcie_port);
-+
-+	pcie_ep_gpio_rst_init(pcie_port);
-+
-+	/* 
-+	* XXX, PCIe elastic buffer bug will cause not to be detected. One more 
-+	* reset PCIe PHY will solve this issue 
-+	*/
-+	for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
-+		/* Disable PCIe PHY Analog part for sanity check */
-+		pcie_phy_pmu_disable(pcie_port);
-+
-+		pcie_phy_rst_assert(pcie_port);
-+		pcie_phy_rst_deassert(pcie_port);
-+
-+		/* Make sure PHY PLL is stable */
-+		udelay(20);
-+
-+		/* PCIe Core reset enabled, low active, sw programmed */
-+		pcie_core_rst_assert(pcie_port);
-+
-+		/* Put PCIe EP in reset status */
-+		pcie_device_rst_assert(pcie_port);
-+
-+		/* PCI PHY & Core reset disabled, high active, sw programmed */
-+		pcie_core_rst_deassert(pcie_port);
-+
-+		/* Already in a quiet state, program PLL, enable PHY, check ready bit */
-+		pcie_phy_clock_mode_setup(pcie_port);
-+
-+		/* Enable PCIe PHY and Clock */
-+		pcie_core_pmu_setup(pcie_port);
-+
-+		/* Clear status registers */
-+		pcie_status_register_clear(pcie_port);
-+
-+#ifdef CONFIG_PCI_MSI
-+		pcie_msi_init(pcie_port);
-+#endif /* CONFIG_PCI_MSI */
-+		pcie_rc_cfg_reg_setup(pcie_port);
-+
-+		/* Once link is up, break out */
-+		if (pcie_app_loigc_setup(pcie_port) == 0)
-+			break;
-+	}
-+	if (i >= IFX_PCIE_PHY_LOOP_CNT) {
-+		printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
-+		return -EIO;
-+	}
-+	/* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */
-+	pcie_replay_time_update(pcie_port);
-+	return 0;
-+}
-+
-+static int __init ifx_pcie_bios_init(void)
-+{
-+    void __iomem *io_map_base;
-+    int pcie_port;
-+    int startup_port;
-+
-+    /* Enable AHB Master/ Slave */
-+    pcie_ahb_pmu_setup();
-+
-+    startup_port = IFX_PCIE_PORT0;
-+    
-+    for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
-+	if (pcie_rc_initialize(pcie_port) == 0) {
-+	    IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", 
-+                 __func__, PCIE_CFG_PORT_TO_BASE(pcie_port));
-+            /* Otherwise, warning will pop up */
-+            io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE);
-+            if (io_map_base == NULL) {
-+                IFX_PCIE_PRINT(PCIE_MSG_ERR, "%s io space ioremap failed\n", __func__);
-+                return -ENOMEM;
-+            }
-+            ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
-+
-+            register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
-+            /* XXX, clear error status */
-+
-+            IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: mem_resource 0x%p, io_resource 0x%p\n", 
-+                              __func__, &ifx_pcie_controller[pcie_port].pcic.mem_resource, 
-+                              &ifx_pcie_controller[pcie_port].pcic.io_resource);
-+
-+        #ifdef IFX_PCIE_ERROR_INT
-+            pcie_rc_core_int_init(pcie_port);
-+        #endif /* IFX_PCIE_ERROR_INT */
-+        }
-+    }
-+
-+    return 0;
-+}
-+arch_initcall(ifx_pcie_bios_init);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
-+MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module");
-+MODULE_DESCRIPTION("Infineon builtin PCIe RC driver");
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie.h
-@@ -0,0 +1,131 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie.h
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe module
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+#ifndef IFXMIPS_PCIE_H
-+#define IFXMIPS_PCIE_H
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+#include "ifxmips_pci_common.h"
-+#include "ifxmips_pcie_reg.h"
-+
-+/*!
-+ \defgroup IFX_PCIE  PCI Express bus driver module   
-+ \brief  PCI Express IP module support VRX200 
-+*/
-+
-+/*!
-+ \defgroup IFX_PCIE_OS OS APIs
-+ \ingroup IFX_PCIE
-+ \brief PCIe bus driver OS interface functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie.h
-+ \ingroup IFX_PCIE  
-+ \brief header file for PCIe module common header file
-+*/
-+#define PCIE_IRQ_LOCK(lock) do {             \
-+    unsigned long flags;                     \
-+    spin_lock_irqsave(&(lock), flags);
-+#define PCIE_IRQ_UNLOCK(lock)                \
-+    spin_unlock_irqrestore(&(lock), flags);  \
-+} while (0)
-+
-+#define PCIE_MSG_MSI        0x00000001
-+#define PCIE_MSG_ISR        0x00000002
-+#define PCIE_MSG_FIXUP      0x00000004
-+#define PCIE_MSG_READ_CFG   0x00000008
-+#define PCIE_MSG_WRITE_CFG  0x00000010
-+#define PCIE_MSG_CFG        (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
-+#define PCIE_MSG_REG        0x00000020
-+#define PCIE_MSG_INIT       0x00000040
-+#define PCIE_MSG_ERR        0x00000080
-+#define PCIE_MSG_PHY        0x00000100
-+#define PCIE_MSG_ANY        0x000001ff
-+
-+#define IFX_PCIE_PORT0      0
-+#define IFX_PCIE_PORT1      1
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+#define IFX_PCIE_CORE_NR    2
-+#else
-+#define IFX_PCIE_CORE_NR    1
-+#endif
-+
-+#define IFX_PCIE_ERROR_INT
-+
-+//#define IFX_PCIE_DBG
-+
-+#if defined(IFX_PCIE_DBG)
-+#define IFX_PCIE_PRINT(_m, _fmt, args...) do {   \
-+        ifx_pcie_debug((_fmt), ##args);          \
-+} while (0)
-+
-+#define INLINE 
-+#else
-+#define IFX_PCIE_PRINT(_m, _fmt, args...)   \
-+    do {} while(0)
-+#define INLINE inline
-+#endif
-+
-+struct ifx_pci_controller {
-+	struct pci_controller   pcic;
-+    
-+	/* RC specific, per host bus information */
-+	u32   port;  /* Port index, 0 -- 1st core, 1 -- 2nd core */
-+};
-+
-+typedef struct ifx_pcie_ir_irq {
-+    const unsigned int irq;
-+    const char name[16];
-+}ifx_pcie_ir_irq_t;
-+
-+typedef struct ifx_pcie_legacy_irq{
-+    const u32 irq_bit;
-+    const int irq;
-+}ifx_pcie_legacy_irq_t;
-+
-+typedef struct ifx_pcie_irq {
-+    ifx_pcie_ir_irq_t ir_irq;
-+    ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
-+}ifx_pcie_irq_t;
-+
-+extern u32 g_pcie_debug_flag;
-+extern void ifx_pcie_debug(const char *fmt, ...);
-+extern void pcie_phy_clock_mode_setup(int pcie_port);
-+extern void pcie_msi_pic_init(int pcie_port);
-+extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
-+extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
-+
-+#define CONFIG_VR9
-+
-+#ifdef CONFIG_VR9
-+#include "ifxmips_pcie_vr9.h"
-+#elif defined (CONFIG_AR10)
-+#include "ifxmips_pcie_ar10.h"
-+#else
-+#error "PCIE: platform not defined"
-+#endif /* CONFIG_VR9 */
-+
-+#endif  /* IFXMIPS_PCIE_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_ar10.h
-@@ -0,0 +1,290 @@
-+/****************************************************************************
-+                              Copyright (c) 2010
-+                            Lantiq Deutschland GmbH
-+                     Am Campeon 3; 85579 Neubiberg, Germany
-+
-+  For licensing information, see the file 'LICENSE' in the root folder of
-+  this software module.
-+
-+ *****************************************************************************/
-+/*!
-+  \file ifxmips_pcie_ar10.h
-+  \ingroup IFX_PCIE
-+  \brief PCIe RC driver ar10 specific file
-+*/
-+
-+#ifndef IFXMIPS_PCIE_AR10_H
-+#define IFXMIPS_PCIE_AR10_H
-+#ifndef AUTOCONF_INCLUDED
-+#include <linux/config.h>
-+#endif /* AUTOCONF_INCLUDED */
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+
-+/* Project header file */
-+#include <asm/ifx/ifx_types.h>
-+#include <asm/ifx/ifx_pmu.h>
-+#include <asm/ifx/ifx_gpio.h>
-+#include <asm/ifx/ifx_ebu_led.h>
-+
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+    ifx_ebu_led_enable();
-+    if (pcie_port == 0) {
-+        ifx_ebu_led_set_data(11, 1);        
-+    }
-+    else {
-+        ifx_ebu_led_set_data(12, 1);  
-+    }
-+}
-+
-+static inline void pcie_ahb_pmu_setup(void) 
-+{
-+    /* XXX, moved to CGU to control AHBM */
-+}
-+
-+static inline void pcie_rcu_endian_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+    /* Inbound, big endian */
-+    reg |= IFX_RCU_BE_AHB4S;
-+    if (pcie_port == 0) {
-+        reg |= IFX_RCU_BE_PCIE0M;
-+
-+    #ifdef CONFIG_IFX_PCIE_HW_SWAP
-+        /* Outbound, software swap needed */
-+        reg |= IFX_RCU_BE_AHB3M;
-+        reg &= ~IFX_RCU_BE_PCIE0S;
-+    #else
-+        /* Outbound little endian  */
-+        reg &= ~IFX_RCU_BE_AHB3M;
-+        reg &= ~IFX_RCU_BE_PCIE0S;
-+    #endif
-+    }
-+    else {
-+        reg |= IFX_RCU_BE_PCIE1M;
-+    #ifdef CONFIG_IFX_PCIE1_HW_SWAP
-+        /* Outbound, software swap needed */
-+        reg |= IFX_RCU_BE_AHB3M;
-+        reg &= ~IFX_RCU_BE_PCIE1S;
-+    #else
-+        /* Outbound little endian  */
-+        reg &= ~IFX_RCU_BE_AHB3M;
-+        reg &= ~IFX_RCU_BE_PCIE1S;
-+    #endif
-+    }
-+
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-+}
-+
-+static inline void pcie_phy_pmu_enable(int pcie_port)
-+{
-+    if (pcie_port == 0) { /* XXX, should use macro*/
-+        PCIE0_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+    else {
-+        PCIE1_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+}
-+
-+static inline void pcie_phy_pmu_disable(int pcie_port)
-+{
-+    if (pcie_port == 0) { /* XXX, should use macro*/
-+        PCIE0_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+    }
-+    else {
-+        PCIE1_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+    }
-+}
-+
-+static inline void pcie_pdi_big_endian(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+    if (pcie_port == 0) {
-+        /* Config AHB->PCIe and PDI endianness */
-+        reg |= IFX_RCU_BE_PCIE0_PDI;
-+    }
-+    else {
-+        /* Config AHB->PCIe and PDI endianness */
-+        reg |= IFX_RCU_BE_PCIE1_PDI;
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+}
-+
-+static inline void pcie_pdi_pmu_enable(int pcie_port)
-+{
-+    if (pcie_port == 0) {
-+        /* Enable PDI to access PCIe PHY register */
-+        PDI0_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+    else {
-+        PDI1_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+}
-+
-+static inline void pcie_core_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+
-+    /* Reset Core, bit 22 */
-+    if (pcie_port == 0) {
-+        reg |= 0x00400000;
-+    }
-+    else {
-+        reg |= 0x08000000; /* Bit 27 */
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_core_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    if (pcie_port == 0) {
-+        reg &= ~0x00400000; /* bit 22 */
-+    }
-+    else {
-+        reg &= ~0x08000000; /* Bit 27 */
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    if (pcie_port == 0) {
-+        reg |= 0x00001000; /* Bit 12 */
-+    }
-+    else {
-+        reg |= 0x00002000; /* Bit 13 */
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    if (pcie_port == 0) {
-+        reg &= ~0x00001000; /* Bit 12 */
-+    }
-+    else {
-+        reg &= ~0x00002000; /* Bit 13 */
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+    if (pcie_port == 0) {
-+        ifx_ebu_led_set_data(11, 0);
-+    }
-+    else {
-+        ifx_ebu_led_set_data(12, 0);
-+    }
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+    mdelay(100);
-+    if (pcie_port == 0) {
-+        ifx_ebu_led_set_data(11, 1);
-+    }
-+    else {
-+        ifx_ebu_led_set_data(12, 1);
-+    }
-+    ifx_ebu_led_disable();
-+}
-+
-+static inline void pcie_core_pmu_setup(int pcie_port)
-+{
-+    if (pcie_port == 0) {
-+        PCIE0_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+    else {
-+        PCIE1_CTRL_PMU_SETUP(IFX_PMU_ENABLE); 
-+    }
-+}
-+
-+static inline void pcie_msi_init(int pcie_port)
-+{
-+    pcie_msi_pic_init(pcie_port);
-+    if (pcie_port == 0) {
-+        MSI0_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+    else {
-+        MSI1_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+}
-+
-+static inline u32
-+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-+{
-+    u32 tbus_number = bus_number;
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+    if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
-+        if (pcibios_host_nr() > 1) {
-+            tbus_number -= pcibios_1st_host_bus_nr();
-+        }        
-+    }
-+#endif /* CONFIG_IFX_PCI */
-+    return tbus_number;
-+}
-+
-+static inline u32
-+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-+{
-+    struct pci_dev *pdev;
-+    u32 tvalue = value;
-+
-+    /* Sanity check */
-+    pdev = pci_get_slot(bus, devfn);
-+    if (pdev == NULL) {
-+        return tvalue;
-+    }
-+
-+    /* Only care about PCI bridge */
-+    if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-+        return tvalue;
-+    }
-+
-+    if (read) { /* Read hack */
-+    #ifdef CONFIG_IFX_PCIE_2ND_CORE
-+        if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
-+            if (pcibios_host_nr() > 1) {
-+                tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
-+            }
-+        }
-+    #endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+    }
-+    else { /* Write hack */
-+    #ifdef CONFIG_IFX_PCIE_2ND_CORE
-+        if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
-+            if (pcibios_host_nr() > 1) {
-+                tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
-+            }
-+        }
-+    #endif
-+    }
-+    return tvalue;
-+}
-+
-+#endif /* IFXMIPS_PCIE_AR10_H */
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_msi.c
-@@ -0,0 +1,392 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_msi.c
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCI MSI sub module
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe MSI Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 02 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+/*!
-+ \defgroup IFX_PCIE_MSI MSI OS APIs
-+ \ingroup IFX_PCIE
-+ \brief PCIe bus driver OS interface functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie_msi.c
-+ \ingroup IFX_PCIE 
-+ \brief PCIe MSI OS interface file
-+*/
-+
-+#ifndef AUTOCONF_INCLUDED
-+#include <linux/config.h>
-+#endif /* AUTOCONF_INCLUDED */
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/pci.h>
-+#include <linux/msi.h>
-+#include <linux/module.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/traps.h>
-+
-+#include <asm/ifx/ifx_types.h>
-+#include <asm/ifx/ifx_regs.h>
-+#include <asm/ifx/common_routines.h>
-+#include <asm/ifx/irq.h>
-+
-+#include "ifxmips_pcie_reg.h"
-+#include "ifxmips_pcie.h"
-+
-+#define IFX_MSI_IRQ_NUM    16
-+
-+enum {
-+    IFX_PCIE_MSI_IDX0 = 0,
-+    IFX_PCIE_MSI_IDX1,
-+    IFX_PCIE_MSI_IDX2,
-+    IFX_PCIE_MSI_IDX3,
-+};
-+
-+typedef struct ifx_msi_irq_idx {
-+    const int irq;
-+    const int idx;
-+}ifx_msi_irq_idx_t;
-+
-+struct ifx_msi_pic {
-+    volatile u32  pic_table[IFX_MSI_IRQ_NUM];
-+    volatile u32  pic_endian;    /* 0x40  */
-+};
-+typedef struct ifx_msi_pic *ifx_msi_pic_t;
-+
-+typedef struct ifx_msi_irq {
-+    const volatile ifx_msi_pic_t msi_pic_p;
-+    const u32 msi_phy_base;
-+    const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM];
-+    /*
-+     * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is 
-+     * in use.
-+     */
-+    u16 msi_free_irq_bitmask;
-+
-+    /*
-+     * Each bit in msi_multiple_irq_bitmask tells that the device using 
-+     * this bit in msi_free_irq_bitmask is also using the next bit. This 
-+     * is used so we can disable all of the MSI interrupts when a device 
-+     * uses multiple.
-+     */
-+    u16 msi_multiple_irq_bitmask;
-+}ifx_msi_irq_t;
-+
-+static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = {
-+    {
-+        .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE,
-+        .msi_phy_base = PCIE_MSI_PHY_BASE,
-+        .msi_irq_idx = {
-+            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+        },
-+        .msi_free_irq_bitmask = 0,
-+        .msi_multiple_irq_bitmask= 0,
-+    },
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+    {
-+        .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE,
-+        .msi_phy_base = PCIE1_MSI_PHY_BASE,
-+        .msi_irq_idx = {
-+            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+        },
-+        .msi_free_irq_bitmask = 0,
-+        .msi_multiple_irq_bitmask= 0,
-+
-+    },
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+};
-+
-+/* 
-+ * This lock controls updates to msi_free_irq_bitmask, 
-+ * msi_multiple_irq_bitmask and pic register settting
-+ */ 
-+static DEFINE_SPINLOCK(ifx_pcie_msi_lock);
-+
-+void pcie_msi_pic_init(int pcie_port)
-+{
-+    spin_lock(&ifx_pcie_msi_lock);
-+    msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN;
-+    spin_unlock(&ifx_pcie_msi_lock);
-+}
-+
-+/** 
-+ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-+ * \brief Called when a driver request MSI interrupts instead of the 
-+ * legacy INT A-D. This routine will allocate multiple interrupts 
-+ * for MSI devices that support them. A device can override this by 
-+ * programming the MSI control bits [6:4] before calling 
-+ * pci_enable_msi(). 
-+ * 
-+ * \param[in] pdev   Device requesting MSI interrupts 
-+ * \param[in] desc   MSI descriptor 
-+ * 
-+ * \return   -EINVAL Invalid pcie root port or invalid msi bit
-+ * \return    0        OK
-+ * \ingroup IFX_PCIE_MSI
-+ */
-+int 
-+arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-+{
-+    int  irq, pos;
-+    u16  control;
-+    int  irq_idx;
-+    int  irq_step;
-+    int configured_private_bits;
-+    int request_private_bits;
-+    struct msi_msg msg;
-+    u16 search_mask;
-+    struct ifx_pci_controller *ctrl = pdev->bus->sysdata;
-+    int pcie_port = ctrl->port;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev));
-+
-+    /* XXX, skip RC MSI itself */
-+    if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
-+        IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__);
-+        return -EINVAL;
-+    }
-+
-+    /*
-+     * Read the MSI config to figure out how many IRQs this device 
-+     * wants.  Most devices only want 1, which will give 
-+     * configured_private_bits and request_private_bits equal 0. 
-+     */
-+    pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control);
-+
-+    /*
-+     * If the number of private bits has been configured then use 
-+     * that value instead of the requested number. This gives the 
-+     * driver the chance to override the number of interrupts 
-+     * before calling pci_enable_msi(). 
-+     */
-+    configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; 
-+    if (configured_private_bits == 0) {
-+        /* Nothing is configured, so use the hardware requested size */
-+        request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
-+    }
-+    else {
-+        /*
-+         * Use the number of configured bits, assuming the 
-+         * driver wanted to override the hardware request 
-+         * value.
-+         */
-+        request_private_bits = configured_private_bits;
-+    }
-+
-+    /*
-+     * The PCI 2.3 spec mandates that there are at most 32
-+     * interrupts. If this device asks for more, only give it one.
-+     */
-+    if (request_private_bits > 5) {
-+        request_private_bits = 0;
-+    }
-+again:
-+    /*
-+     * The IRQs have to be aligned on a power of two based on the
-+     * number being requested.
-+     */
-+    irq_step = (1 << request_private_bits);
-+
-+    /* Mask with one bit for each IRQ */
-+    search_mask = (1 << irq_step) - 1;
-+
-+    /*
-+     * We're going to search msi_free_irq_bitmask_lock for zero 
-+     * bits. This represents an MSI interrupt number that isn't in 
-+     * use.
-+     */
-+    spin_lock(&ifx_pcie_msi_lock);
-+    for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) {
-+        if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) {
-+            msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos; 
-+            msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos;
-+            break; 
-+        }
-+    }
-+    spin_unlock(&ifx_pcie_msi_lock); 
-+
-+    /* Make sure the search for available interrupts didn't fail */ 
-+    if (pos >= IFX_MSI_IRQ_NUM) {
-+        if (request_private_bits) {
-+            IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free "
-+                  "interrupts, trying just one", __func__, 1 << request_private_bits);
-+            request_private_bits = 0;
-+            goto again;
-+        }
-+        else {
-+            printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__);
-+            return -EINVAL;
-+        }
-+    } 
-+    irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq;
-+    irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx);
-+
-+    /*
-+     * Initialize MSI. This has to match the memory-write endianess from the device 
-+     * Address bits [23:12]
-+     */
-+    spin_lock(&ifx_pcie_msi_lock); 
-+    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) |
-+                    SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) |
-+                    SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
-+
-+    /* Enable this entry */
-+    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE;
-+    spin_unlock(&ifx_pcie_msi_lock);
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n",
-+        pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]);
-+
-+    /* Update the number of IRQs the device has available to it */
-+    control &= ~PCI_MSI_FLAGS_QSIZE;
-+    control |= (request_private_bits << 4);
-+    pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control);
-+
-+    set_irq_msi(irq, desc);
-+    msg.address_hi = 0x0;
-+    msg.address_lo = msi_irqs[pcie_port].msi_phy_base;
-+    msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data);
-+
-+    write_msi_msg(irq, &msg);
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
-+    return 0;
-+}
-+
-+static int
-+pcie_msi_irq_to_port(unsigned int irq, int *port)
-+{
-+    int ret = 0;
-+
-+    if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 ||
-+        irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) {
-+        *port = IFX_PCIE_PORT0;
-+    }
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+    else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 ||
-+        irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) {
-+        *port = IFX_PCIE_PORT1;
-+    }
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+    else {
-+        printk(KERN_ERR "%s: Attempted to teardown illegal " 
-+            "MSI interrupt (%d)\n", __func__, irq);
-+        ret = -EINVAL;
-+    }
-+    return ret;
-+}
-+
-+/** 
-+ * \fn void arch_teardown_msi_irq(unsigned int irq)
-+ * \brief Called when a device no longer needs its MSI interrupts. All 
-+ * MSI interrupts for the device are freed. 
-+ * 
-+ * \param irq   The devices first irq number. There may be multple in sequence.
-+ * \return none
-+ * \ingroup IFX_PCIE_MSI
-+ */
-+void 
-+arch_teardown_msi_irq(unsigned int irq)
-+{
-+    int pos;
-+    int number_irqs; 
-+    u16 bitmask;
-+    int pcie_port;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__);
-+
-+    BUG_ON(irq > INT_NUM_IM4_IRL31);
-+
-+    if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) {
-+        return;
-+    }
-+
-+    /* Shift the mask to the correct bit location, not always correct 
-+     * Probally, the first match will be chosen.
-+     */
-+    for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) {
-+        if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq) 
-+            && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) {
-+            break;
-+        }
-+    }
-+    if (pos >= IFX_MSI_IRQ_NUM) {
-+        printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__);
-+        return;
-+    }
-+    spin_lock(&ifx_pcie_msi_lock);
-+    /* Disable this entry */
-+    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE;
-+    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA);
-+    spin_unlock(&ifx_pcie_msi_lock); 
-+    /*
-+     * Count the number of IRQs we need to free by looking at the
-+     * msi_multiple_irq_bitmask. Each bit set means that the next
-+     * IRQ is also owned by this device.
-+     */ 
-+    number_irqs = 0; 
-+    while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) && 
-+        (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) {
-+        number_irqs++;
-+    }
-+    number_irqs++;
-+
-+    /* Mask with one bit for each IRQ */
-+    bitmask = (1 << number_irqs) - 1;
-+
-+    bitmask <<= pos;
-+    if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) {
-+        printk(KERN_ERR "%s: Attempted to teardown MSI "
-+             "interrupt (%d) not in use\n", __func__, irq);
-+        return;
-+    }
-+    /* Checks are done, update the in use bitmask */
-+    spin_lock(&ifx_pcie_msi_lock);
-+    msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask;
-+    msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1);
-+    spin_unlock(&ifx_pcie_msi_lock);
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
-+}
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
-+MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
-+MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_phy.c
-@@ -0,0 +1,478 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_phy.c
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe PHY sub module
-+**
-+** DATE         : 14 May 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    14 May,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_pcie_phy.c
-+ \ingroup IFX_PCIE  
-+ \brief PCIe PHY PLL register programming source file
-+*/
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/paccess.h>
-+#include <linux/delay.h>
-+
-+#include "ifxmips_pcie_reg.h"
-+#include "ifxmips_pcie.h"
-+
-+/* PCIe PDI only supports 16 bit operation */
-+
-+#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \
-+    ((*(volatile u16 *) (__addr)) = (__data))
-+    
-+#define IFX_PCIE_PHY_REG_READ16(__addr)  \
-+    (*(volatile u16 *) (__addr))
-+
-+#define IFX_PCIE_PHY_REG16(__addr)   \
-+    (*(volatile u16 *) (__addr))
-+
-+#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \
-+    u16 read_data;                                    \
-+    u16 write_data;                                   \
-+    read_data = IFX_PCIE_PHY_REG_READ16((__reg));      \
-+    write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\
-+    IFX_PCIE_PHY_REG_WRITE16((__reg), write_data);               \
-+} while (0)
-+
-+#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */
-+
-+//#define IFX_PCI_PHY_REG_DUMP
-+
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+static void
-+pcie_phy_reg_dump(int pcie_port) 
-+{
-+    printk("PLL REGFILE\n");
-+    printk("PCIE_PHY_PLL_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL3    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL3(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL4    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL4(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL5    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL5(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL6    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL6(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL7    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL7(pcie_port)));
-+    printk("PCIE_PHY_PLL_A_CTRL1  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_PLL_A_CTRL2  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_PLL_A_CTRL3  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL3(pcie_port)));
-+    printk("PCIE_PHY_PLL_STATUS   0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)));
-+
-+    printk("TX1 REGFILE\n");
-+    printk("PCIE_PHY_TX1_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_TX1_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_TX1_CTRL3    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL3(pcie_port)));
-+    printk("PCIE_PHY_TX1_A_CTRL1  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_TX1_A_CTRL2  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_TX1_MOD1     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD1(pcie_port)));
-+    printk("PCIE_PHY_TX1_MOD2     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD2(pcie_port)));
-+    printk("PCIE_PHY_TX1_MOD3     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD3(pcie_port)));
-+
-+    printk("TX2 REGFILE\n");
-+    printk("PCIE_PHY_TX2_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_TX2_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_TX2_A_CTRL1  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_TX2_A_CTRL2  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_TX2_MOD1     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD1(pcie_port)));
-+    printk("PCIE_PHY_TX2_MOD2     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD2(pcie_port)));
-+    printk("PCIE_PHY_TX2_MOD3     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD3(pcie_port)));
-+
-+    printk("RX1 REGFILE\n");
-+    printk("PCIE_PHY_RX1_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_RX1_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_RX1_CDR      0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CDR(pcie_port)));
-+    printk("PCIE_PHY_RX1_EI       0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_EI(pcie_port)));
-+    printk("PCIE_PHY_RX1_A_CTRL   0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_A_CTRL(pcie_port)));
-+}
-+#endif /* IFX_PCI_PHY_REG_DUMP */
-+
-+static void
-+pcie_phy_comm_setup(int pcie_port)
-+{
-+   /* PLL Setting */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
-+
-+    /* increase the bias reference voltage */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
-+
-+    /* Endcnt */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
-+
-+    /* force */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
-+
-+    /* predrv_ser_en */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
-+
-+    /* ctrl_lim */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
-+
-+    /* ctrl */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
-+
-+    /* predrv_ser_en */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
-+
-+    /* RTERM*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
-+
-+    /* Improved 100MHz clock output  */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
-+
-+    /* Reduced CDR BW to avoid glitches */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
-+}
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+static void 
-+pcie_phy_36mhz_mode_setup(int pcie_port) 
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif
-+
-+    /* en_ext_mmd_div_ratio */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+    /* ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+    /* pll_ensdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+    /* en_const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+    /* mmd */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+    /* lf_mode */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+    /* const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+    /* const sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+    /* pllmod */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE
-+static void 
-+pcie_phy_36mhz_ssc_mode_setup(int pcie_port) 
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif
-+
-+    /* PLL Setting */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
-+
-+    /* Increase the bias reference voltage */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
-+
-+    /* Endcnt */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
-+
-+    /* Force */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
-+
-+    /* Predrv_ser_en */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
-+
-+    /* ctrl_lim */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
-+
-+    /* ctrl */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
-+
-+    /* predrv_ser_en */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
-+
-+    /* RTERM*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
-+
-+    /* en_ext_mmd_div_ratio */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+    /* ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+    /* pll_ensdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400);
-+
-+    /* en_const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+    /* mmd */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+    /* lf_mode */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+    /* const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100);
-+    /* const sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+    /* pllmod */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF);
-+
-+    /* improved 100MHz clock output  */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
-+
-+    /* reduced CDR BW to avoid glitches */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
-+    
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE
-+static void 
-+pcie_phy_25mhz_mode_setup(int pcie_port) 
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif
-+    /* en_const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+    /* pll_ensdm */    
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200);
-+
-+    /* en_ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002);
-+
-+    /* ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070);
-+
-+    /* mmd */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000);
-+
-+    /* lf_mode */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000);
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE
-+static void 
-+pcie_phy_100mhz_mode_setup(int pcie_port) 
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif 
-+    /* en_ext_mmd_div_ratio */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+    /* ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+    /* pll_ensdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+    /* en_const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+    /* mmd */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+    /* lf_mode */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+    /* const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+    /* const sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+    /* pllmod */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */
-+
-+static int
-+pcie_phy_wait_startup_ready(int pcie_port)
-+{
-+    int i;
-+
-+    for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) {
-+        if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) {
-+            break;
-+        }
-+        udelay(10);
-+    }
-+    if (i >= IFX_PCIE_PLL_TIMEOUT) {
-+        printk(KERN_ERR "%s PLL Link timeout\n", __func__);
-+        return -1;
-+    }
-+    return 0;
-+}
-+
-+static void 
-+pcie_phy_load_enable(int pcie_port, int slice) 
-+{
-+    /* Set the load_en of tx/rx slice to '1' */
-+    switch (slice) {
-+        case 1:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010);
-+            break;
-+        case 2:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010);
-+            break;
-+        case 3:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002);
-+            break;
-+    }
-+}
-+
-+static void 
-+pcie_phy_load_disable(int pcie_port, int slice) 
-+{ 
-+    /* set the load_en of tx/rx slice to '0' */ 
-+    switch (slice) {
-+        case 1:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010);
-+            break;
-+        case 2:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010);
-+            break;
-+        case 3: 
-+            IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002);
-+            break;
-+    }
-+}
-+
-+static void 
-+pcie_phy_load_war(int pcie_port)
-+{
-+    int slice;
-+
-+    for (slice = 1; slice < 4; slice++) {
-+        pcie_phy_load_enable(pcie_port, slice);
-+        udelay(1);
-+        pcie_phy_load_disable(pcie_port, slice);
-+    }
-+}
-+
-+static void 
-+pcie_phy_tx2_modulation(int pcie_port)
-+{
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF);
-+    mdelay(1);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF);
-+}
-+
-+static void 
-+pcie_phy_tx1_modulation(int pcie_port)
-+{
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF);
-+    mdelay(1);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF);
-+}
-+
-+static void
-+pcie_phy_tx_modulation_war(int pcie_port)
-+{
-+    int i;
-+
-+#define PCIE_PHY_MODULATION_NUM 5 
-+    for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) {
-+        pcie_phy_tx2_modulation(pcie_port);
-+        pcie_phy_tx1_modulation(pcie_port);
-+    }
-+#undef PCIE_PHY_MODULATION_NUM
-+}
-+
-+void
-+pcie_phy_clock_mode_setup(int pcie_port)
-+{
-+    pcie_pdi_big_endian(pcie_port);
-+
-+    /* Enable PDI to access PCIe PHY register */
-+    pcie_pdi_pmu_enable(pcie_port);
-+
-+    /* Configure PLL and PHY clock */
-+    pcie_phy_comm_setup(pcie_port);
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+    pcie_phy_36mhz_mode_setup(pcie_port);
-+#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE)
-+    pcie_phy_36mhz_ssc_mode_setup(pcie_port);
-+#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE)
-+    pcie_phy_25mhz_mode_setup(pcie_port);
-+#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE)
-+    pcie_phy_100mhz_mode_setup(pcie_port);
-+#else
-+    #error "PCIE PHY Clock Mode must be chosen first!!!!"
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
-+
-+    /* Enable PCIe PHY and make PLL setting take effect */
-+    pcie_phy_pmu_enable(pcie_port);
-+
-+    /* Check if we are in startup_ready status */
-+    pcie_phy_wait_startup_ready(pcie_port);
-+
-+    pcie_phy_load_war(pcie_port);
-+
-+    /* Apply TX modulation workarounds */
-+    pcie_phy_tx_modulation_war(pcie_port);
-+
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif
-+}
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_pm.c
-@@ -0,0 +1,176 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_pm.c
-+** PROJECT      : IFX UEIP
-+** MODULES      : PCIE Root Complex Driver
-+**
-+** DATE         : 21 Dec 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIE Root Complex Driver Power Managment
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Lantiq Deutschland GmbH
-+**                      Am Campeon 3, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+**
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 21 Dec,2009   Lei Chuanhua    First UEIP release
-+*******************************************************************************/
-+/*!
-+  \defgroup IFX_PCIE_PM Power Management functions
-+  \ingroup IFX_PCIE
-+  \brief IFX PCIE Root Complex Driver power management functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie_pm.c
-+ \ingroup IFX_PCIE    
-+ \brief source file for PCIE Root Complex Driver Power Management
-+*/
-+
-+#ifndef EXPORT_SYMTAB
-+#define EXPORT_SYMTAB
-+#endif
-+#ifndef AUTOCONF_INCLUDED
-+#include <linux/config.h>
-+#endif /* AUTOCONF_INCLUDED */
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/system.h>
-+
-+/* Project header */
-+#include <asm/ifx/ifx_types.h>
-+#include <asm/ifx/ifx_regs.h>
-+#include <asm/ifx/common_routines.h>
-+#include <asm/ifx/ifx_pmcu.h>
-+#include "ifxmips_pcie_pm.h"
-+
-+/** 
-+ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState)
-+ * \brief the callback function to request pmcu state in the power management hardware-dependent module
-+ *
-+ * \param pmcuState This parameter is a PMCU state.
-+ *
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR   Failed to set power state.
-+ * \return IFX_PMCU_RETURN_DENIED  Not allowed to operate power state
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t 
-+ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState)
-+{
-+    switch(pmcuState) 
-+    {
-+        case IFX_PMCU_STATE_D0:
-+            return IFX_PMCU_RETURN_SUCCESS;
-+        case IFX_PMCU_STATE_D1: // Not Applicable
-+            return IFX_PMCU_RETURN_DENIED;
-+        case IFX_PMCU_STATE_D2: // Not Applicable
-+            return IFX_PMCU_RETURN_DENIED;
-+        case IFX_PMCU_STATE_D3: // Module clock gating and Power gating
-+            return IFX_PMCU_RETURN_SUCCESS;
-+        default:
-+            return IFX_PMCU_RETURN_DENIED;
-+    }
-+}
-+
-+/** 
-+ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState)
-+ * \brief the callback function to get pmcu state in the power management hardware-dependent module
-+
-+ * \param pmcuState Pointer to return power state.
-+ *
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR   Failed to set power state.
-+ * \return IFX_PMCU_RETURN_DENIED  Not allowed to operate power state
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t 
-+ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState)
-+{
-+    return IFX_PMCU_RETURN_SUCCESS;
-+}
-+
-+/**
-+ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule
-+ * 
-+ * \param   pmcuModule      Module
-+ * \param   newState        New state
-+ * \param   oldState        Old state
-+ * \return  IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return  IFX_PMCU_RETURN_ERROR   Failed to set power state.
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t 
-+ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+{
-+    return IFX_PMCU_RETURN_SUCCESS;
-+}
-+
-+/**
-+ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule
-+ * 
-+ * \param   pmcuModule      Module
-+ * \param   newState        New state
-+ * \param   oldState        Old state
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR   Failed to set power state.
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t 
-+ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+{
-+    return IFX_PMCU_RETURN_SUCCESS;
-+}
-+
-+/** 
-+ * \fn static void ifx_pcie_pmcu_init(void)
-+ * \brief Register with central PMCU module
-+ * \return none
-+ * \ingroup IFX_PCIE_PM
-+ */
-+void
-+ifx_pcie_pmcu_init(void)
-+{
-+    IFX_PMCU_REGISTER_t pmcuRegister;
-+
-+    /* XXX, hook driver context */
-+
-+    /* State function register */
-+    memset(&pmcuRegister, 0, sizeof(IFX_PMCU_REGISTER_t));
-+    pmcuRegister.pmcuModule = IFX_PMCU_MODULE_PCIE;
-+    pmcuRegister.pmcuModuleNr = 0;
-+    pmcuRegister.ifx_pmcu_state_change = ifx_pcie_pmcu_state_change;
-+    pmcuRegister.ifx_pmcu_state_get = ifx_pcie_pmcu_state_get;
-+    pmcuRegister.pre = ifx_pcie_pmcu_prechange;
-+    pmcuRegister.post= ifx_pcie_pmcu_postchange;
-+    ifx_pmcu_register(&pmcuRegister); 
-+}
-+
-+/** 
-+ * \fn static void ifx_pcie_pmcu_exit(void)
-+ * \brief Unregister with central PMCU module
-+ *
-+ * \return none
-+ * \ingroup IFX_PCIE_PM
-+ */
-+void
-+ifx_pcie_pmcu_exit(void)
-+{
-+    IFX_PMCU_REGISTER_t pmcuUnRegister;
-+
-+   /* XXX, hook driver context */
-+   
-+    pmcuUnRegister.pmcuModule = IFX_PMCU_MODULE_PCIE;
-+    pmcuUnRegister.pmcuModuleNr = 0;
-+    ifx_pmcu_unregister(&pmcuUnRegister);
-+}
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_pm.h
-@@ -0,0 +1,36 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_pm.h
-+** PROJECT      : IFX UEIP
-+** MODULES      : PCIe Root Complex Driver
-+**
-+** DATE         : 21 Dec 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver Power Managment
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Lantiq Deutschland GmbH
-+**                      Am Campeon 3, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+**
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 21 Dec,2009   Lei Chuanhua    First UEIP release
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_pcie_pm.h
-+ \ingroup IFX_PCIE 
-+ \brief header file for PCIe Root Complex Driver Power Management
-+*/
-+
-+#ifndef IFXMIPS_PCIE_PM_H
-+#define IFXMIPS_PCIE_PM_H
-+
-+void ifx_pcie_pmcu_init(void);
-+void ifx_pcie_pmcu_exit(void);
-+
-+#endif /* IFXMIPS_PCIE_PM_H  */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_reg.h
-@@ -0,0 +1,1001 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_reg.h
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe module
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+#ifndef IFXMIPS_PCIE_REG_H
-+#define IFXMIPS_PCIE_REG_H
-+/*!
-+ \file ifxmips_pcie_reg.h
-+ \ingroup IFX_PCIE  
-+ \brief header file for PCIe module register definition
-+*/
-+/* PCIe Address Mapping Base */
-+#define PCIE_CFG_PHY_BASE        0x1D000000UL
-+#define PCIE_CFG_BASE           (KSEG1 + PCIE_CFG_PHY_BASE)
-+#define PCIE_CFG_SIZE           (8 * 1024 * 1024)
-+
-+#define PCIE_MEM_PHY_BASE        0x1C000000UL
-+#define PCIE_MEM_BASE           (KSEG1 + PCIE_MEM_PHY_BASE)
-+#define PCIE_MEM_SIZE           (16 * 1024 * 1024)
-+#define PCIE_MEM_PHY_END        (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
-+
-+#define PCIE_IO_PHY_BASE         0x1D800000UL
-+#define PCIE_IO_BASE            (KSEG1 + PCIE_IO_PHY_BASE)
-+#define PCIE_IO_SIZE            (1 * 1024 * 1024)
-+#define PCIE_IO_PHY_END         (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
-+
-+#define PCIE_RC_CFG_BASE        (KSEG1 + 0x1D900000)
-+#define PCIE_APP_LOGIC_REG      (KSEG1 + 0x1E100900)
-+#define PCIE_MSI_PHY_BASE        0x1F600000UL
-+
-+#define PCIE_PDI_PHY_BASE        0x1F106800UL
-+#define PCIE_PDI_BASE           (KSEG1 + PCIE_PDI_PHY_BASE)
-+#define PCIE_PDI_SIZE            0x400
-+
-+#define PCIE1_CFG_PHY_BASE        0x19000000UL
-+#define PCIE1_CFG_BASE           (KSEG1 + PCIE1_CFG_PHY_BASE)
-+#define PCIE1_CFG_SIZE           (8 * 1024 * 1024)
-+
-+#define PCIE1_MEM_PHY_BASE        0x18000000UL
-+#define PCIE1_MEM_BASE           (KSEG1 + PCIE1_MEM_PHY_BASE)
-+#define PCIE1_MEM_SIZE           (16 * 1024 * 1024)
-+#define PCIE1_MEM_PHY_END        (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
-+
-+#define PCIE1_IO_PHY_BASE         0x19800000UL
-+#define PCIE1_IO_BASE            (KSEG1 + PCIE1_IO_PHY_BASE)
-+#define PCIE1_IO_SIZE            (1 * 1024 * 1024)
-+#define PCIE1_IO_PHY_END         (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
-+
-+#define PCIE1_RC_CFG_BASE        (KSEG1 + 0x19900000)
-+#define PCIE1_APP_LOGIC_REG      (KSEG1 + 0x1E100700)
-+#define PCIE1_MSI_PHY_BASE        0x1F400000UL
-+
-+#define PCIE1_PDI_PHY_BASE        0x1F700400UL
-+#define PCIE1_PDI_BASE           (KSEG1 + PCIE1_PDI_PHY_BASE)
-+#define PCIE1_PDI_SIZE            0x400
-+
-+#define PCIE_CFG_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
-+#define PCIE_MEM_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
-+#define PCIE_IO_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_END(X)  ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
-+#define PCIE_IO_PHY_PORT_TO_BASE(X)  ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
-+#define PCIE_IO_PHY_PORT_TO_END(X)   ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
-+#define PCIE_APP_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
-+#define PCIE_RC_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
-+#define PCIE_PHY_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
-+
-+/* PCIe Application Logic Register */
-+/* RC Core Control Register */
-+#define PCIE_RC_CCR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
-+/* This should be enabled after initializing configuratin registers
-+ * Also should check link status retraining bit
-+ */
-+#define PCIE_RC_CCR_LTSSM_ENABLE             0x00000001    /* Enable LTSSM to continue link establishment */
-+
-+/* RC Core Debug Register */
-+#define PCIE_RC_DR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
-+#define PCIE_RC_DR_DLL_UP                    0x00000001  /* Data Link Layer Up */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE       0x0000000E  /* Current Power State */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE_S     1
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE       0x000001F0  /* Current LTSSM State */
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S     4
-+
-+#define PCIE_RC_DR_PM_DEV_STATE              0x00000E00  /* Power Management D-State */
-+#define PCIE_RC_DR_PM_DEV_STATE_S            9
-+
-+#define PCIE_RC_DR_PM_ENABLED                0x00001000  /* Power Management State from PMU */
-+#define PCIE_RC_DR_PME_EVENT_ENABLED         0x00002000  /* Power Management Event Enable State */
-+#define PCIE_RC_DR_AUX_POWER_ENABLED         0x00004000  /* Auxiliary Power Enable */
-+
-+/* Current Power State Definition */
-+enum {
-+    PCIE_RC_DR_D0 = 0,
-+    PCIE_RC_DR_D1,   /* Not supported */
-+    PCIE_RC_DR_D2,   /* Not supported */
-+    PCIE_RC_DR_D3,
-+    PCIE_RC_DR_UN,
-+};
-+
-+/* PHY Link Status Register */
-+#define PCIE_PHY_SR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
-+#define PCIE_PHY_SR_PHY_LINK_UP              0x00000001   /* PHY Link Up/Down Indicator */
-+
-+/* Electromechanical Control Register */
-+#define PCIE_EM_CR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
-+#define PCIE_EM_CR_CARD_IS_PRESENT           0x00000001  /* Card Presence Detect State */
-+#define PCIE_EM_CR_MRL_OPEN                  0x00000002  /* MRL Sensor State */
-+#define PCIE_EM_CR_POWER_FAULT_SET           0x00000004  /* Power Fault Detected */
-+#define PCIE_EM_CR_MRL_SENSOR_SET            0x00000008  /* MRL Sensor Changed */
-+#define PCIE_EM_CR_PRESENT_DETECT_SET        0x00000010  /* Card Presense Detect Changed */
-+#define PCIE_EM_CR_CMD_CPL_INT_SET           0x00000020  /* Command Complete Interrupt */
-+#define PCIE_EM_CR_SYS_INTERLOCK_SET         0x00000040  /* System Electromechanical IterLock Engaged */
-+#define PCIE_EM_CR_ATTENTION_BUTTON_SET      0x00000080  /* Attention Button Pressed */
-+
-+/* Interrupt Status Register */
-+#define PCIE_IR_SR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
-+#define PCIE_IR_SR_PME_CAUSE_MSI             0x00000002  /* MSI caused by PME */
-+#define PCIE_IR_SR_HP_PME_WAKE_GEN           0x00000004  /* Hotplug PME Wake Generation */
-+#define PCIE_IR_SR_HP_MSI                    0x00000008  /* Hotplug MSI */
-+#define PCIE_IR_SR_AHB_LU_ERR                0x00000030  /* AHB Bridge Lookup Error Signals */
-+#define PCIE_IR_SR_AHB_LU_ERR_S              4
-+#define PCIE_IR_SR_INT_MSG_NUM               0x00003E00  /* Interrupt Message Number */
-+#define PCIE_IR_SR_INT_MSG_NUM_S             9
-+#define PCIE_IR_SR_AER_INT_MSG_NUM           0xF8000000  /* Advanced Error Interrupt Message Number */
-+#define PCIE_IR_SR_AER_INT_MSG_NUM_S         27
-+
-+/* Message Control Register */
-+#define PCIE_MSG_CR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
-+#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG     0x00000001  /* Generate PME Turn Off Message */
-+#define PCIE_MSG_CR_GEN_UNLOCK_MSG           0x00000002  /* Generate Unlock Message */
-+
-+#define PCIE_VDM_DR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
-+
-+/* Vendor-Defined Message Requester ID Register */
-+#define PCIE_VDM_RID(X)                     (PCIE_APP_PORT_TO_BASE (X) + 0x38)
-+#define PCIE_VDM_RID_VENROR_MSG_REQ_ID       0x0000FFFF
-+#define PCIE_VDM_RID_VDMRID_S                0
-+
-+/* ASPM Control Register */
-+#define PCIE_ASPM_CR(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
-+#define PCIE_ASPM_CR_HOT_RST                 0x00000001  /* Hot Reset Request to the downstream device */
-+#define PCIE_ASPM_CR_REQ_EXIT_L1             0x00000002  /* Request to Exit L1 */
-+#define PCIE_ASPM_CR_REQ_ENTER_L1            0x00000004  /* Request to Enter L1 */
-+
-+/* Vendor Message DW0 Register */
-+#define PCIE_VM_MSG_DW0(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
-+#define PCIE_VM_MSG_DW0_TYPE                 0x0000001F  /* Message type */
-+#define PCIE_VM_MSG_DW0_TYPE_S               0
-+#define PCIE_VM_MSG_DW0_FORMAT               0x00000060  /* Format */
-+#define PCIE_VM_MSG_DW0_FORMAT_S             5
-+#define PCIE_VM_MSG_DW0_TC                   0x00007000  /* Traffic Class */
-+#define PCIE_VM_MSG_DW0_TC_S                 12
-+#define PCIE_VM_MSG_DW0_ATTR                 0x000C0000  /* Atrributes */
-+#define PCIE_VM_MSG_DW0_ATTR_S               18
-+#define PCIE_VM_MSG_DW0_EP_TLP               0x00100000  /* Poisoned TLP */
-+#define PCIE_VM_MSG_DW0_TD                   0x00200000  /* TLP Digest */
-+#define PCIE_VM_MSG_DW0_LEN                  0xFFC00000  /* Length */
-+#define PCIE_VM_MSG_DW0_LEN_S                22
-+
-+/* Format Definition */
-+enum {
-+    PCIE_VM_MSG_FORMAT_00 = 0,  /* 3DW Hdr, no data*/
-+    PCIE_VM_MSG_FORMAT_01,      /* 4DW Hdr, no data */
-+    PCIE_VM_MSG_FORMAT_10,      /* 3DW Hdr, with data */
-+    PCIE_VM_MSG_FORMAT_11,      /* 4DW Hdr, with data */
-+};
-+
-+/* Traffic Class Definition */
-+enum {
-+    PCIE_VM_MSG_TC0 = 0,
-+    PCIE_VM_MSG_TC1,
-+    PCIE_VM_MSG_TC2,
-+    PCIE_VM_MSG_TC3,
-+    PCIE_VM_MSG_TC4,
-+    PCIE_VM_MSG_TC5,
-+    PCIE_VM_MSG_TC6,
-+    PCIE_VM_MSG_TC7,
-+};
-+
-+/* Attributes Definition */
-+enum {
-+    PCIE_VM_MSG_ATTR_00 = 0,   /* RO and No Snoop cleared */
-+    PCIE_VM_MSG_ATTR_01,       /* RO cleared , No Snoop set */
-+    PCIE_VM_MSG_ATTR_10,       /* RO set, No Snoop cleared*/
-+    PCIE_VM_MSG_ATTR_11,       /* RO and No Snoop set */
-+};
-+
-+/* Payload Size Definition */
-+#define PCIE_VM_MSG_LEN_MIN  0
-+#define PCIE_VM_MSG_LEN_MAX  1024
-+
-+/* Vendor Message DW1 Register */
-+#define PCIE_VM_MSG_DW1(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
-+#define PCIE_VM_MSG_DW1_FUNC_NUM            0x00000070  /* Function Number */
-+#define PCIE_VM_MSG_DW1_FUNC_NUM_S          8
-+#define PCIE_VM_MSG_DW1_CODE                0x00FF0000  /* Message Code */
-+#define PCIE_VM_MSG_DW1_CODE_S              16
-+#define PCIE_VM_MSG_DW1_TAG                 0xFF000000  /* Tag */
-+#define PCIE_VM_MSG_DW1_TAG_S               24
-+
-+#define PCIE_VM_MSG_DW2(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
-+#define PCIE_VM_MSG_DW3(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
-+
-+/* Vendor Message Request Register */
-+#define PCIE_VM_MSG_REQR(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
-+#define PCIE_VM_MSG_REQR_REQ                 0x00000001  /* Vendor Message Request */
-+
-+
-+/* AHB Slave Side Band Control Register */
-+#define PCIE_AHB_SSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
-+#define PCIE_AHB_SSB_REQ_BCM                0x00000001 /* Slave Reques BCM filed */
-+#define PCIE_AHB_SSB_REQ_EP                 0x00000002 /* Slave Reques EP filed */
-+#define PCIE_AHB_SSB_REQ_TD                 0x00000004 /* Slave Reques TD filed */
-+#define PCIE_AHB_SSB_REQ_ATTR               0x00000018 /* Slave Reques Attribute number */
-+#define PCIE_AHB_SSB_REQ_ATTR_S             3
-+#define PCIE_AHB_SSB_REQ_TC                 0x000000E0 /* Slave Request TC Field */
-+#define PCIE_AHB_SSB_REQ_TC_S               5
-+
-+/* AHB Master SideBand Ctrl Register */
-+#define PCIE_AHB_MSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
-+#define PCIE_AHB_MSB_RESP_ATTR               0x00000003 /* Master Response Attribute number */
-+#define PCIE_AHB_MSB_RESP_ATTR_S             0
-+#define PCIE_AHB_MSB_RESP_BAD_EOT            0x00000004 /* Master Response Badeot filed */
-+#define PCIE_AHB_MSB_RESP_BCM                0x00000008 /* Master Response BCM filed */
-+#define PCIE_AHB_MSB_RESP_EP                 0x00000010 /* Master Response EP filed */
-+#define PCIE_AHB_MSB_RESP_TD                 0x00000020 /* Master Response TD filed */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM            0x000003C0 /* Master Response Function number */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM_S          6
-+
-+/* AHB Control Register, fixed bus enumeration exception */
-+#define PCIE_AHB_CTRL(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
-+#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS     0x00000001 
-+
-+/* Interrupt Enalbe Register */
-+#define PCIE_IRNEN(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
-+#define PCIE_IRNCR(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
-+#define PCIE_IRNICR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
-+
-+/* PCIe interrupt enable/control/capture register definition */
-+#define PCIE_IRN_AER_REPORT                 0x00000001  /* AER Interrupt */
-+#define PCIE_IRN_AER_MSIX                   0x00000002  /* Advanced Error MSI-X Interrupt */
-+#define PCIE_IRN_PME                        0x00000004  /* PME Interrupt */
-+#define PCIE_IRN_HOTPLUG                    0x00000008  /* Hotplug Interrupt */
-+#define PCIE_IRN_RX_VDM_MSG                 0x00000010  /* Vendor-Defined Message Interrupt */
-+#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG     0x00000020  /* Correctable Error Message Interrupt */
-+#define PCIE_IRN_RX_NON_FATAL_ERR_MSG       0x00000040  /* Non-fatal Error Message */
-+#define PCIE_IRN_RX_FATAL_ERR_MSG           0x00000080  /* Fatal Error Message */
-+#define PCIE_IRN_RX_PME_MSG                 0x00000100  /* PME Message Interrupt */
-+#define PCIE_IRN_RX_PME_TURNOFF_ACK         0x00000200  /* PME Turnoff Ack Message Interrupt */
-+#define PCIE_IRN_AHB_BR_FATAL_ERR           0x00000400  /* AHB Fatal Error Interrupt */
-+#define PCIE_IRN_LINK_AUTO_BW_STATUS        0x00000800  /* Link Auto Bandwidth Status Interrupt */
-+#define PCIE_IRN_BW_MGT                     0x00001000  /* Bandwidth Managment Interrupt */
-+#define PCIE_IRN_INTA                       0x00002000  /* INTA */
-+#define PCIE_IRN_INTB                       0x00004000  /* INTB */
-+#define PCIE_IRN_INTC                       0x00008000  /* INTC */
-+#define PCIE_IRN_INTD                       0x00010000  /* INTD */
-+#define PCIE_IRN_WAKEUP                     0x00020000  /* Wake up Interrupt */
-+
-+#define PCIE_RC_CORE_COMBINED_INT    (PCIE_IRN_AER_REPORT |  PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
-+                                      PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
-+                                      PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
-+                                      PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
-+                                      PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
-+/* PCIe RC Configuration Register */
-+#define PCIE_VDID(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
-+
-+/* Bit definition from pci_reg.h */
-+#define PCIE_PCICMDSTS(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
-+#define PCIE_CCRID(X)               (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
-+#define PCIE_CLSLTHTBR(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
-+/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
-+#define PCIE_BAR0(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
-+#define PCIE_BAR1(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
-+
-+#define PCIE_BNR(X)                 (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
-+/* Bus Number Register bits */
-+#define PCIE_BNR_PRIMARY_BUS_NUM             0x000000FF
-+#define PCIE_BNR_PRIMARY_BUS_NUM_S           0
-+#define PCIE_PNR_SECONDARY_BUS_NUM           0x0000FF00
-+#define PCIE_PNR_SECONDARY_BUS_NUM_S         8
-+#define PCIE_PNR_SUB_BUS_NUM                 0x00FF0000
-+#define PCIE_PNR_SUB_BUS_NUM_S               16
-+
-+/* IO Base/Limit Register bits */
-+#define PCIE_IOBLSECS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C)  /* RC only */
-+#define PCIE_IOBLSECS_32BIT_IO_ADDR             0x00000001
-+#define PCIE_IOBLSECS_IO_BASE_ADDR              0x000000F0
-+#define PCIE_IOBLSECS_IO_BASE_ADDR_S            4
-+#define PCIE_IOBLSECS_32BIT_IOLIMT              0x00000100
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR             0x0000F000
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S           12
-+
-+/* Non-prefetchable Memory Base/Limit Register bit */
-+#define PCIE_MBML(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20)  /* RC only */
-+#define PCIE_MBML_MEM_BASE_ADDR                 0x0000FFF0
-+#define PCIE_MBML_MEM_BASE_ADDR_S               4
-+#define PCIE_MBML_MEM_LIMIT_ADDR                0xFFF00000
-+#define PCIE_MBML_MEM_LIMIT_ADDR_S              20
-+
-+/* Prefetchable Memory Base/Limit Register bit */
-+#define PCIE_PMBL(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24)  /* RC only */
-+#define PCIE_PMBL_64BIT_ADDR                    0x00000001
-+#define PCIE_PMBL_UPPER_12BIT                   0x0000FFF0
-+#define PCIE_PMBL_UPPER_12BIT_S                 4
-+#define PCIE_PMBL_E64MA                         0x00010000
-+#define PCIE_PMBL_END_ADDR                      0xFFF00000
-+#define PCIE_PMBL_END_ADDR_S                    20
-+#define PCIE_PMBU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28)  /* RC only */
-+#define PCIE_PMLU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C)  /* RC only */
-+
-+/* I/O Base/Limit Upper 16 bits register */
-+#define PCIE_IO_BANDL(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30)  /* RC only */
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE        0x0000FFFF
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S      0
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT       0xFFFF0000
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S     16
-+
-+#define PCIE_CPR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
-+#define PCIE_EBBAR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
-+
-+/* Interrupt and Secondary Bridge Control Register */
-+#define PCIE_INTRBCTRL(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
-+
-+#define PCIE_INTRBCTRL_INT_LINE                 0x000000FF
-+#define PCIE_INTRBCTRL_INT_LINE_S               0
-+#define PCIE_INTRBCTRL_INT_PIN                  0x0000FF00
-+#define PCIE_INTRBCTRL_INT_PIN_S                8
-+#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE   0x00010000    /* #PERR */
-+#define PCIE_INTRBCTRL_SERR_ENABLE              0x00020000    /* #SERR */
-+#define PCIE_INTRBCTRL_ISA_ENABLE               0x00040000    /* ISA enable, IO 64KB only */
-+#define PCIE_INTRBCTRL_VGA_ENABLE               0x00080000    /* VGA enable */
-+#define PCIE_INTRBCTRL_VGA_16BIT_DECODE         0x00100000    /* VGA 16bit decode */
-+#define PCIE_INTRBCTRL_RST_SECONDARY_BUS        0x00400000    /* Secondary bus rest, hot rest, 1ms */
-+/* Others are read only */
-+enum {
-+    PCIE_INTRBCTRL_INT_NON = 0,
-+    PCIE_INTRBCTRL_INTA,
-+    PCIE_INTRBCTRL_INTB,
-+    PCIE_INTRBCTRL_INTC,
-+    PCIE_INTRBCTRL_INTD,
-+};
-+
-+#define PCIE_PM_CAPR(X)                  (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
-+
-+/* Power Management Control and Status Register */
-+#define PCIE_PM_CSR(X)                   (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
-+
-+#define PCIE_PM_CSR_POWER_STATE           0x00000003   /* Power State */
-+#define PCIE_PM_CSR_POWER_STATE_S         0
-+#define PCIE_PM_CSR_SW_RST                0x00000008   /* Soft Reset Enabled */
-+#define PCIE_PM_CSR_PME_ENABLE            0x00000100   /* PME Enable */
-+#define PCIE_PM_CSR_PME_STATUS            0x00008000   /* PME status */
-+
-+/* MSI Capability Register for EP */
-+#define PCIE_MCAPR(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
-+
-+#define PCIE_MCAPR_MSI_CAP_ID             0x000000FF  /* MSI Capability ID */
-+#define PCIE_MCAPR_MSI_CAP_ID_S           0
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR       0x0000FF00  /* Next Capability Pointer */
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S     8
-+#define PCIE_MCAPR_MSI_ENABLE             0x00010000  /* MSI Enable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP          0x000E0000  /* Multiple Message Capable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP_S        17
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE       0x00700000  /* Multiple Message Enable */
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE_S     20
-+#define PCIE_MCAPR_ADDR64_CAP             0X00800000  /* 64-bit Address Capable */
-+
-+/* MSI Message Address Register */
-+#define PCIE_MA(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
-+
-+#define PCIE_MA_ADDR_MASK                 0xFFFFFFFC  /* Message Address */
-+
-+/* MSI Message Upper Address Register */
-+#define PCIE_MUA(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
-+
-+/* MSI Message Data Register */
-+#define PCIE_MD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
-+
-+#define PCIE_MD_DATA                      0x0000FFFF  /* Message Data */
-+#define PCIE_MD_DATA_S                    0
-+
-+/* PCI Express Capability Register */
-+#define PCIE_XCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
-+
-+#define PCIE_XCAP_ID                      0x000000FF  /* PCI Express Capability ID */
-+#define PCIE_XCAP_ID_S                    0
-+#define PCIE_XCAP_NEXT_CAP                0x0000FF00  /* Next Capability Pointer */
-+#define PCIE_XCAP_NEXT_CAP_S              8
-+#define PCIE_XCAP_VER                     0x000F0000  /* PCI Express Capability Version */
-+#define PCIE_XCAP_VER_S                   16
-+#define PCIE_XCAP_DEV_PORT_TYPE           0x00F00000  /* Device Port Type */
-+#define PCIE_XCAP_DEV_PORT_TYPE_S         20
-+#define PCIE_XCAP_SLOT_IMPLEMENTED        0x01000000  /* Slot Implemented */
-+#define PCIE_XCAP_MSG_INT_NUM             0x3E000000  /* Interrupt Message Number */
-+#define PCIE_XCAP_MSG_INT_NUM_S           25
-+
-+/* Device Capability Register */
-+#define PCIE_DCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
-+
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE        0x00000007   /* Max Payload size */
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S      0
-+#define PCIE_DCAP_PHANTOM_FUNC            0x00000018   /* Phanton Function, not supported */
-+#define PCIE_DCAP_PHANTOM_FUNC_S          3
-+#define PCIE_DCAP_EXT_TAG                 0x00000020   /* Extended Tag Field */
-+#define PCIE_DCAP_EP_L0S_LATENCY          0x000001C0   /* EP L0s latency only */
-+#define PCIE_DCAP_EP_L0S_LATENCY_S        6
-+#define PCIE_DCAP_EP_L1_LATENCY           0x00000E00   /* EP L1 latency only */
-+#define PCIE_DCAP_EP_L1_LATENCY_S         9
-+#define PCIE_DCAP_ROLE_BASE_ERR_REPORT    0x00008000   /* Role Based ERR */
-+
-+/* Maximum payload size supported */
-+enum {
-+    PCIE_MAX_PAYLOAD_128 = 0,
-+    PCIE_MAX_PAYLOAD_256,
-+    PCIE_MAX_PAYLOAD_512,
-+    PCIE_MAX_PAYLOAD_1024,
-+    PCIE_MAX_PAYLOAD_2048,
-+    PCIE_MAX_PAYLOAD_4096,
-+};
-+
-+/* Device Control and Status Register */
-+#define PCIE_DCTLSTS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
-+
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN        0x00000001   /* COR-ERR */
-+#define PCIE_DCTLSTS_NONFATAL_ERR_EN           0x00000002   /* Non-fatal ERR */
-+#define PCIE_DCTLSTS_FATAL_ERR_EN              0x00000004   /* Fatal ERR */
-+#define PCIE_DCTLSYS_UR_REQ_EN                 0x00000008   /* UR ERR */
-+#define PCIE_DCTLSTS_RELAXED_ORDERING_EN       0x00000010   /* Enable relaxing ordering */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE          0x000000E0   /* Max payload mask */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S        5
-+#define PCIE_DCTLSTS_EXT_TAG_EN                0x00000100   /* Extended tag field */
-+#define PCIE_DCTLSTS_PHANTOM_FUNC_EN           0x00000200   /* Phantom Function Enable */
-+#define PCIE_DCTLSTS_AUX_PM_EN                 0x00000400   /* AUX Power PM Enable */
-+#define PCIE_DCTLSTS_NO_SNOOP_EN               0x00000800   /* Enable no snoop, except root port*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE             0x00007000   /* Max Read Request size*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE_S           12
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR           0x00010000   /* COR-ERR Detected */
-+#define PCIE_DCTLSTS_NONFATAL_ERR              0x00020000   /* Non-Fatal ERR Detected */
-+#define PCIE_DCTLSTS_FATAL_ER                  0x00040000   /* Fatal ERR Detected */
-+#define PCIE_DCTLSTS_UNSUPPORTED_REQ           0x00080000   /* UR Detected */
-+#define PCIE_DCTLSTS_AUX_POWER                 0x00100000   /* Aux Power Detected */
-+#define PCIE_DCTLSTS_TRANSACT_PENDING          0x00200000   /* Transaction pending */
-+
-+#define PCIE_DCTLSTS_ERR_EN      (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
-+                                  PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
-+                                  PCIE_DCTLSYS_UR_REQ_EN)
-+
-+/* Link Capability Register */
-+#define PCIE_LCAP(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
-+#define PCIE_LCAP_MAX_LINK_SPEED               0x0000000F  /* Max link speed, 0x1 by default */
-+#define PCIE_LCAP_MAX_LINK_SPEED_S             0
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH             0x000003F0  /* Maxium Length Width */
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH_S           4
-+#define PCIE_LCAP_ASPM_LEVEL                   0x00000C00  /* Active State Link PM Support */
-+#define PCIE_LCAP_ASPM_LEVEL_S                 10
-+#define PCIE_LCAP_L0S_EIXT_LATENCY             0x00007000  /* L0s Exit Latency */
-+#define PCIE_LCAP_L0S_EIXT_LATENCY_S           12
-+#define PCIE_LCAP_L1_EXIT_LATENCY              0x00038000  /* L1 Exit Latency */
-+#define PCIE_LCAP_L1_EXIT_LATENCY_S            15
-+#define PCIE_LCAP_CLK_PM                       0x00040000  /* Clock Power Management */
-+#define PCIE_LCAP_SDER                         0x00080000  /* Surprise Down Error Reporting */
-+#define PCIE_LCAP_DLL_ACTIVE_REPROT            0x00100000  /* Data Link Layer Active Reporting Capable */
-+#define PCIE_LCAP_PORT_NUM                     0xFF0000000  /* Port number */
-+#define PCIE_LCAP_PORT_NUM_S                   24
-+
-+/* Maximum Length width definition */
-+#define PCIE_MAX_LENGTH_WIDTH_RES  0x00
-+#define PCIE_MAX_LENGTH_WIDTH_X1   0x01  /* Default */
-+#define PCIE_MAX_LENGTH_WIDTH_X2   0x02
-+#define PCIE_MAX_LENGTH_WIDTH_X4   0x04
-+#define PCIE_MAX_LENGTH_WIDTH_X8   0x08
-+#define PCIE_MAX_LENGTH_WIDTH_X12  0x0C
-+#define PCIE_MAX_LENGTH_WIDTH_X16  0x10
-+#define PCIE_MAX_LENGTH_WIDTH_X32  0x20
-+
-+/* Active State Link PM definition */
-+enum {
-+    PCIE_ASPM_RES0                = 0,
-+    PCIE_ASPM_L0S_ENTRY_SUPPORT,        /* L0s */
-+    PCIE_ASPM_RES1,
-+    PCIE_ASPM_L0S_L1_ENTRY_SUPPORT,     /* L0s and L1, default */
-+};
-+
-+/* L0s Exit Latency definition */
-+enum {
-+    PCIE_L0S_EIXT_LATENCY_L64NS    = 0, /* < 64 ns */
-+    PCIE_L0S_EIXT_LATENCY_B64A128,      /* > 64 ns < 128 ns */
-+    PCIE_L0S_EIXT_LATENCY_B128A256,     /* > 128 ns < 256 ns */
-+    PCIE_L0S_EIXT_LATENCY_B256A512,     /* > 256 ns < 512 ns */
-+    PCIE_L0S_EIXT_LATENCY_B512TO1U,     /* > 512 ns < 1 us */
-+    PCIE_L0S_EIXT_LATENCY_B1A2U,        /* > 1 us < 2 us */
-+    PCIE_L0S_EIXT_LATENCY_B2A4U,        /* > 2 us < 4 us */
-+    PCIE_L0S_EIXT_LATENCY_M4US,         /* > 4 us  */
-+};
-+
-+/* L1 Exit Latency definition */
-+enum {
-+    PCIE_L1_EXIT_LATENCY_L1US  = 0,  /* < 1 us */
-+    PCIE_L1_EXIT_LATENCY_B1A2,       /* > 1 us < 2 us */
-+    PCIE_L1_EXIT_LATENCY_B2A4,       /* > 2 us < 4 us */
-+    PCIE_L1_EXIT_LATENCY_B4A8,       /* > 4 us < 8 us */
-+    PCIE_L1_EXIT_LATENCY_B8A16,      /* > 8 us < 16 us */
-+    PCIE_L1_EXIT_LATENCY_B16A32,     /* > 16 us < 32 us */
-+    PCIE_L1_EXIT_LATENCY_B32A64,     /* > 32 us < 64 us */
-+    PCIE_L1_EXIT_LATENCY_M64US,      /* > 64 us */
-+};
-+
-+/* Link Control and Status Register */
-+#define PCIE_LCTLSTS(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
-+#define PCIE_LCTLSTS_ASPM_ENABLE            0x00000003  /* Active State Link PM Control */
-+#define PCIE_LCTLSTS_ASPM_ENABLE_S          0
-+#define PCIE_LCTLSTS_RCB128                 0x00000008  /* Read Completion Boundary 128*/
-+#define PCIE_LCTLSTS_LINK_DISABLE           0x00000010  /* Link Disable */
-+#define PCIE_LCTLSTS_RETRIAN_LINK           0x00000020  /* Retrain Link */
-+#define PCIE_LCTLSTS_COM_CLK_CFG            0x00000040  /* Common Clock Configuration */
-+#define PCIE_LCTLSTS_EXT_SYNC               0x00000080  /* Extended Synch */
-+#define PCIE_LCTLSTS_CLK_PM_EN              0x00000100  /* Enable Clock Powerm Management */
-+#define PCIE_LCTLSTS_LINK_SPEED             0x000F0000  /* Link Speed */
-+#define PCIE_LCTLSTS_LINK_SPEED_S           16
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH  0x03F00000  /* Negotiated Link Width */
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
-+#define PCIE_LCTLSTS_RETRAIN_PENDING        0x08000000  /* Link training is ongoing */
-+#define PCIE_LCTLSTS_SLOT_CLK_CFG           0x10000000  /* Slot Clock Configuration */
-+#define PCIE_LCTLSTS_DLL_ACTIVE             0x20000000  /* Data Link Layer Active */
-+
-+/* Slot Capabilities Register */
-+#define PCIE_SLCAP(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
-+
-+/* Slot Capabilities */
-+#define PCIE_SLCTLSTS(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
-+
-+/* Root Control and Capability Register */
-+#define PCIE_RCTLCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
-+#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR  0x00000001   /* #SERR on COR-ERR */
-+#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR     0x00000002   /* #SERR on Non-Fatal ERR */
-+#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR        0x00000004   /* #SERR on Fatal ERR */
-+#define PCIE_RCTLCAP_PME_INT_EN               0x00000008   /* PME Interrupt Enable */
-+#define PCIE_RCTLCAP_SERR_ENABLE    (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
-+                                     PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
-+/* Root Status Register */
-+#define PCIE_RSTS(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
-+#define PCIE_RSTS_PME_REQ_ID                   0x0000FFFF   /* PME Request ID */
-+#define PCIE_RSTS_PME_REQ_ID_S                 0
-+#define PCIE_RSTS_PME_STATUS                   0x00010000   /* PME Status */
-+#define PCIE_RSTS_PME_PENDING                  0x00020000   /* PME Pending */
-+
-+/* PCI Express Enhanced Capability Header */
-+#define PCIE_ENHANCED_CAP(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
-+#define PCIE_ENHANCED_CAP_ID                 0x0000FFFF  /* PCI Express Extended Capability ID */
-+#define PCIE_ENHANCED_CAP_ID_S               0
-+#define PCIE_ENHANCED_CAP_VER                0x000F0000  /* Capability Version */
-+#define PCIE_ENHANCED_CAP_VER_S              16
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET        0xFFF00000  /* Next Capability Offset */
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S      20
-+
-+/* Uncorrectable Error Status Register */
-+#define PCIE_UES_R(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
-+#define PCIE_DATA_LINK_PROTOCOL_ERR          0x00000010  /* Data Link Protocol Error Status */
-+#define PCIE_SURPRISE_DOWN_ERROR             0x00000020  /* Surprise Down Error Status */
-+#define PCIE_POISONED_TLP                    0x00001000  /* Poisoned TLP Status */
-+#define PCIE_FC_PROTOCOL_ERR                 0x00002000  /* Flow Control Protocol Error Status */
-+#define PCIE_COMPLETION_TIMEOUT              0x00004000  /* Completion Timeout Status */
-+#define PCIE_COMPLETOR_ABORT                 0x00008000  /* Completer Abort Error */
-+#define PCIE_UNEXPECTED_COMPLETION           0x00010000  /* Unexpected Completion Status */
-+#define PCIE_RECEIVER_OVERFLOW               0x00020000  /* Receive Overflow Status */
-+#define PCIE_MALFORNED_TLP                   0x00040000  /* Malformed TLP Stauts */
-+#define PCIE_ECRC_ERR                        0x00080000  /* ECRC Error Stauts */
-+#define PCIE_UR_REQ                          0x00100000  /* Unsupported Request Error Status */
-+#define PCIE_ALL_UNCORRECTABLE_ERR    (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
-+                         PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT |   \
-+                         PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
-+                         PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
-+
-+/* Uncorrectable Error Mask Register, Mask means no report */
-+#define PCIE_UEMR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
-+
-+/* Uncorrectable Error Severity Register */
-+#define PCIE_UESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
-+
-+/* Correctable Error Status Register */
-+#define PCIE_CESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
-+#define PCIE_RX_ERR                          0x00000001  /* Receive Error Status */
-+#define PCIE_BAD_TLP                         0x00000040  /* Bad TLP Status */
-+#define PCIE_BAD_DLLP                        0x00000080  /* Bad DLLP Status */
-+#define PCIE_REPLAY_NUM_ROLLOVER             0x00000100  /* Replay Number Rollover Status */
-+#define PCIE_REPLAY_TIMER_TIMEOUT_ERR        0x00001000  /* Reply Timer Timeout Status */
-+#define PCIE_ADVISORY_NONFTAL_ERR            0x00002000  /* Advisory Non-Fatal Error Status */
-+#define PCIE_CORRECTABLE_ERR        (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
-+                                     PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
-+
-+/* Correctable Error Mask Register */
-+#define PCIE_CEMR(X)                        (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
-+
-+/* Advanced Error Capabilities and Control Register */
-+#define PCIE_AECCR(X)                       (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
-+#define PCIE_AECCR_FIRST_ERR_PTR            0x0000001F  /* First Error Pointer */
-+#define PCIE_AECCR_FIRST_ERR_PTR_S          0
-+#define PCIE_AECCR_ECRC_GEN_CAP             0x00000020  /* ECRC Generation Capable */
-+#define PCIE_AECCR_ECRC_GEN_EN              0x00000040  /* ECRC Generation Enable */
-+#define PCIE_AECCR_ECRC_CHECK_CAP           0x00000080  /* ECRC Check Capable */
-+#define PCIE_AECCR_ECRC_CHECK_EN            0x00000100  /* ECRC Check Enable */
-+
-+/* Header Log Register 1 */
-+#define PCIE_HLR1(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
-+
-+/* Header Log Register 2 */
-+#define PCIE_HLR2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
-+
-+/* Header Log Register 3 */
-+#define PCIE_HLR3(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
-+
-+/* Header Log Register 4 */
-+#define PCIE_HLR4(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
-+
-+/* Root Error Command Register */
-+#define PCIE_RECR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
-+#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN  0x00000001 /* COR-ERR */
-+#define PCIE_RECR_NONFATAL_ERR_REPORT_EN     0x00000002 /* Non-Fatal ERR */
-+#define PCIE_RECR_FATAL_ERR_REPORT_EN        0x00000004 /* Fatal ERR */
-+#define PCIE_RECR_ERR_REPORT_EN  (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
-+                PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
-+
-+/* Root Error Status Register */
-+#define PCIE_RESR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
-+#define PCIE_RESR_CORRECTABLE_ERR                0x00000001   /* COR-ERR Receveid */
-+#define PCIE_RESR_MULTI_CORRECTABLE_ERR          0x00000002   /* Multiple COR-ERR Received */
-+#define PCIE_RESR_FATAL_NOFATAL_ERR              0x00000004   /* ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR        0x00000008   /* Multiple ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR  0x00000010   /* First UN-COR Fatal */
-+#define PCIR_RESR_NON_FATAL_ERR                  0x00000020   /* Non-Fatal Error Message Received */
-+#define PCIE_RESR_FATAL_ERR                      0x00000040   /* Fatal Message Received */
-+#define PCIE_RESR_AER_INT_MSG_NUM                0xF8000000   /* Advanced Error Interrupt Message Number */
-+#define PCIE_RESR_AER_INT_MSG_NUM_S              27
-+
-+/* Error Source Indentification Register */
-+#define PCIE_ESIR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID         0x0000FFFF
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S       0
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID         0xFFFF0000
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S       16
-+
-+/* VC Enhanced Capability Header */
-+#define PCIE_VC_ECH(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
-+
-+/* Port VC Capability Register */
-+#define PCIE_PVC1(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
-+#define PCIE_PVC1_EXT_VC_CNT                    0x00000007  /* Extended VC Count */
-+#define PCIE_PVC1_EXT_VC_CNT_S                  0
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT            0x00000070  /* Low Priority Extended VC Count */
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S          4
-+#define PCIE_PVC1_REF_CLK                       0x00000300  /* Reference Clock */
-+#define PCIE_PVC1_REF_CLK_S                     8
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE       0x00000C00  /* Port Arbitration Table Entry Size */
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S     10
-+
-+/* Extended Virtual Channel Count Defintion */
-+#define PCIE_EXT_VC_CNT_MIN   0
-+#define PCIE_EXT_VC_CNT_MAX   7
-+
-+/* Port Arbitration Table Entry Size Definition */
-+enum {
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
-+};
-+
-+/* Port VC Capability Register 2 */
-+#define PCIE_PVC2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
-+#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR      0x00000001  /* HW Fixed arbitration, 16 phase WRR */
-+#define PCIE_PVC2_VC_ARB_32P_WRR            0x00000002  /* 32 phase WRR */
-+#define PCIE_PVC2_VC_ARB_64P_WRR            0x00000004  /* 64 phase WRR */
-+#define PCIE_PVC2_VC_ARB_128P_WRR           0x00000008  /* 128 phase WRR */
-+#define PCIE_PVC2_VC_ARB_WRR                0x0000000F
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET         0xFF000000  /* VC arbitration table offset, not support */
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S       24
-+
-+/* Port VC Control and Status Register */     
-+#define PCIE_PVCCRSR(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
-+#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB         0x00000001  /* Load VC Arbitration Table */
-+#define PCIE_PVCCRSR_VC_ARB_SEL              0x0000000E  /* VC Arbitration Select */
-+#define PCIE_PVCCRSR_VC_ARB_SEL_S            1
-+#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS       0x00010000  /* Arbitration Status */
-+
-+/* VC0 Resource Capability Register */
-+#define PCIE_VC0_RC(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
-+#define PCIE_VC0_RC_PORT_ARB_HW_FIXED        0x00000001  /* HW Fixed arbitration */
-+#define PCIE_VC0_RC_PORT_ARB_32P_WRR         0x00000002  /* 32 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_64P_WRR         0x00000004  /* 64 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_128P_WRR        0x00000008  /* 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR     0x00000010  /* Time-based 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR     0x00000020  /* Time-based 256 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB          (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
-+                        PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
-+                        PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
-+
-+#define PCIE_VC0_RC_REJECT_SNOOP             0x00008000  /* Reject Snoop Transactioin */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS            0x007F0000  /* Maximum time Slots */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS_S          16
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET      0xFF000000  /* Port Arbitration Table Offset */
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S    24
-+
-+/* VC0 Resource Control Register */
-+#define PCIE_VC0_RC0(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
-+#define PCIE_VC0_RC0_TVM0                    0x00000001  /* TC0 and VC0 */
-+#define PCIE_VC0_RC0_TVM1                    0x00000002  /* TC1 and VC1 */
-+#define PCIE_VC0_RC0_TVM2                    0x00000004  /* TC2 and VC2 */
-+#define PCIE_VC0_RC0_TVM3                    0x00000008  /* TC3 and VC3 */
-+#define PCIE_VC0_RC0_TVM4                    0x00000010  /* TC4 and VC4 */
-+#define PCIE_VC0_RC0_TVM5                    0x00000020  /* TC5 and VC5 */
-+#define PCIE_VC0_RC0_TVM6                    0x00000040  /* TC6 and VC6 */
-+#define PCIE_VC0_RC0_TVM7                    0x00000080  /* TC7 and VC7 */
-+#define PCIE_VC0_RC0_TC_VC                   0x000000FF  /* TC/VC mask */
-+
-+#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB       0x00010000  /* Load Port Arbitration Table */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL            0x000E0000  /* Port Arbitration Select */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL_S          17
-+#define PCIE_VC0_RC0_VC_ID                   0x07000000  /* VC ID */
-+#define PCIE_VC0_RC0_VC_ID_S                 24
-+#define PCIE_VC0_RC0_VC_EN                   0x80000000  /* VC Enable */
-+
-+/* VC0 Resource Status Register */
-+#define PCIE_VC0_RSR0(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
-+#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS    0x00010000  /* Port Arbitration Table Status,not used */
-+#define PCIE_VC0_RSR0_VC_NEG_PENDING         0x00020000  /* VC Negotiation Pending */
-+
-+/* Ack Latency Timer and Replay Timer Register */
-+#define PCIE_ALTRT(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT   0x0000FFFF  /* Round Trip Latency Time Limit */
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT          0xFFFF0000  /* Replay Time Limit */
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S        16
-+
-+/* Other Message Register */
-+#define PCIE_OMR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
-+
-+/* Port Force Link Register */
-+#define PCIE_PFLR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
-+#define PCIE_PFLR_LINK_NUM                   0x000000FF  /* Link Number */
-+#define PCIE_PFLR_LINK_NUM_S                 0
-+#define PCIE_PFLR_FORCE_LINK                 0x00008000  /* Force link */
-+#define PCIE_PFLR_LINK_STATE                 0x003F0000  /* Link State */
-+#define PCIE_PFLR_LINK_STATE_S               16
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT        0xFF000000  /* Low Power Entrance Count, only for EP */
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S      24
-+
-+/* Ack Frequency Register */
-+#define PCIE_AFR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
-+#define PCIE_AFR_AF                          0x000000FF  /* Ack Frequency */
-+#define PCIE_AFR_AF_S                        0
-+#define PCIE_AFR_FTS_NUM                     0x0000FF00  /* The number of Fast Training Sequence from L0S to L0 */
-+#define PCIE_AFR_FTS_NUM_S                   8
-+#define PCIE_AFR_COM_FTS_NUM                 0x00FF0000  /* N_FTS; when common clock is used*/
-+#define PCIE_AFR_COM_FTS_NUM_S               16
-+#define PCIE_AFR_L0S_ENTRY_LATENCY           0x07000000  /* L0s Entrance Latency */
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_S         24
-+#define PCIE_AFR_L1_ENTRY_LATENCY            0x38000000  /* L1 Entrance Latency */
-+#define PCIE_AFR_L1_ENTRY_LATENCY_S          27
-+#define PCIE_AFR_FTS_NUM_DEFAULT             32
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT   7
-+#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT    5
-+
-+/* Port Link Control Register */
-+#define PCIE_PLCR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
-+#define PCIE_PLCR_OTHER_MSG_REQ              0x00000001  /* Other Message Request */
-+#define PCIE_PLCR_SCRAMBLE_DISABLE           0x00000002  /* Scramble Disable */  
-+#define PCIE_PLCR_LOOPBACK_EN                0x00000004  /* Loopback Enable */
-+#define PCIE_PLCR_LTSSM_HOT_RST              0x00000008  /* Force LTSSM to the hot reset */
-+#define PCIE_PLCR_DLL_LINK_EN                0x00000020  /* Enable Link initialization */
-+#define PCIE_PLCR_FAST_LINK_SIM_EN           0x00000080  /* Sets all internal timers to fast mode for simulation purposes */
-+#define PCIE_PLCR_LINK_MODE                  0x003F0000  /* Link Mode Enable Mask */
-+#define PCIE_PLCR_LINK_MODE_S                16
-+#define PCIE_PLCR_CORRUPTED_CRC_EN           0x02000000  /* Enabled Corrupt CRC */
-+
-+/* Lane Skew Register */
-+#define PCIE_LSR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
-+#define PCIE_LSR_LANE_SKEW_NUM               0x00FFFFFF  /* Insert Lane Skew for Transmit, not applicable */
-+#define PCIE_LSR_LANE_SKEW_NUM_S             0
-+#define PCIE_LSR_FC_DISABLE                  0x01000000  /* Disable of Flow Control */
-+#define PCIE_LSR_ACKNAK_DISABLE              0x02000000  /* Disable of Ack/Nak */
-+#define PCIE_LSR_LANE_DESKEW_DISABLE         0x80000000  /* Disable of Lane-to-Lane Skew */
-+
-+/* Symbol Number Register */
-+#define PCIE_SNR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
-+#define PCIE_SNR_TS                          0x0000000F  /* Number of TS Symbol */
-+#define PCIE_SNR_TS_S                        0
-+#define PCIE_SNR_SKP                         0x00000700  /* Number of SKP Symbol */
-+#define PCIE_SNR_SKP_S                       8
-+#define PCIE_SNR_REPLAY_TIMER                0x0007C000  /* Timer Modifier for Replay Timer */
-+#define PCIE_SNR_REPLAY_TIMER_S              14
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER        0x00F80000  /* Timer Modifier for Ack/Nak Latency Timer */
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S      19
-+#define PCIE_SNR_FC_TIMER                    0x1F000000  /* Timer Modifier for Flow Control Watchdog Timer */
-+#define PCIE_SNR_FC_TIMER_S                  28
-+
-+/* Symbol Timer Register and Filter Mask Register 1 */
-+#define PCIE_STRFMR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
-+#define PCIE_STRFMR_SKP_INTERVAL            0x000007FF  /* SKP lnterval Value */
-+#define PCIE_STRFMR_SKP_INTERVAL_S          0
-+#define PCIE_STRFMR_FC_WDT_DISABLE          0x00008000  /* Disable of FC Watchdog Timer */
-+#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK    0x00010000  /* Mask Function Mismatch Filtering for Incoming Requests */
-+#define PCIE_STRFMR_POISONED_TLP_OK         0x00020000  /* Mask Poisoned TLP Filtering */
-+#define PCIE_STRFMR_BAR_MATCH_OK            0x00040000  /* Mask BAR Match Filtering */
-+#define PCIE_STRFMR_TYPE1_CFG_REQ_OK        0x00080000  /* Mask Type 1 Configuration Request Filtering */
-+#define PCIE_STRFMR_LOCKED_REQ_OK           0x00100000  /* Mask Locked Request Filtering */
-+#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK    0x00200000  /* Mask Tag Error Rules for Received Completions */
-+#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000  /* Mask Requester ID Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK         0x00800000  /* Mask Function Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_TC_MISMATCH_OK           0x01000000  /* Mask Traffic Class Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK         0x02000000  /* Mask Attribute Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK       0x04000000  /* Mask Length Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_TLP_ECRC_ERR_OK              0x08000000  /* Mask ECRC Error Filtering */
-+#define PCIE_STRFMR_CPL_TLP_ECRC_OK              0x10000000  /* Mask ECRC Error Filtering for Completions */
-+#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP           0x20000000  /* Send Message TLPs */
-+#define PCIE_STRFMR_RX_IO_TRANS_ENABLE           0x40000000  /* Mask Filtering of received I/O Requests */
-+#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE          0x80000000  /* Mask Filtering of Received Configuration Requests */
-+
-+#define PCIE_DEF_SKP_INTERVAL    700             /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
-+
-+/* Filter Masker Register 2 */
-+#define PCIE_FMR2(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
-+#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1    0x00000001  /* Mask RADM Filtering and Error Handling Rules */
-+#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1    0x00000002  /* Mask RADM Filtering and Error Handling Rules */
-+
-+/* Debug Register 0 */
-+#define PCIE_DBR0(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
-+
-+/* Debug Register 1 */
-+#define PCIE_DBR1(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
-+
-+/* Transmit Posted FC Credit Status Register */
-+#define PCIE_TPFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS           0x00000FFF /* Transmit Posted Data FC Credits */
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S         0
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS            0x000FF000 /* Transmit Posted Header FC Credits */
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S          12
-+
-+/* Transmit Non-Posted FC Credit Status */
-+#define PCIE_TNPFCS(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS         0x00000FFF /* Transmit Non-Posted Data FC Credits */
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S       0
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS          0x000FF000 /* Transmit Non-Posted Header FC Credits */
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S        12
-+
-+/* Transmit Complete FC Credit Status Register */
-+#define PCIE_TCFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS         0x00000FFF /* Transmit Completion Data FC Credits */
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S       0
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS          0x000FF000 /* Transmit Completion Header FC Credits */
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S        12
-+
-+/* Queue Status Register */
-+#define PCIE_QSR(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
-+#define PCIE_QSR_WAIT_UPDATE_FC_DLL               0x00000001 /* Received TLP FC Credits Not Returned */
-+#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY           0x00000002 /* Transmit Retry Buffer Not Empty */
-+#define PCIE_QSR_RX_QUEUE_NOT_EMPTY               0x00000004 /* Received Queue Not Empty */
-+
-+/* VC Transmit Arbitration Register 1 */
-+#define PCIE_VCTAR1(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC0               0x000000FF /* WRR Weight for VC0 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC1               0x0000FF00 /* WRR Weight for VC1 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC2               0x00FF0000 /* WRR Weight for VC2 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC3               0xFF000000 /* WRR Weight for VC3 */
-+
-+/* VC Transmit Arbitration Register 2 */
-+#define PCIE_VCTAR2(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC4               0x000000FF /* WRR Weight for VC4 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC5               0x0000FF00 /* WRR Weight for VC5 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC6               0x00FF0000 /* WRR Weight for VC6 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC7               0xFF000000 /* WRR Weight for VC7 */
-+
-+/* VC0 Posted Receive Queue Control Register */
-+#define PCIE_VC0_PRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS            0x00000FFF /* VC0 Posted Data Credits */
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S          0
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS             0x000FF000 /* VC0 Posted Header Credits */
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S           12
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE          0x00E00000 /* VC0 Posted TLP Queue Mode */
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S        20
-+#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER           0x40000000 /* TLP Type Ordering for VC0 */    
-+#define PCIE_VC0_PRQCR_VC_STRICT_ORDER           0x80000000 /* VC0 Ordering for Receive Queues */
-+
-+/* VC0 Non-Posted Receive Queue Control */
-+#define PCIE_VC0_NPRQCR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS          0x00000FFF /* VC0 Non-Posted Data Credits */
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S        0
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS           0x000FF000 /* VC0 Non-Posted Header Credits */
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S         12
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE        0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S      20
-+
-+/* VC0 Completion Receive Queue Control */
-+#define PCIE_VC0_CRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS          0x00000FFF /* VC0 Completion TLP Queue Mode */
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S        0
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS           0x000FF000 /* VC0 Completion Header Credits */
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S         12
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE        0x00E00000 /* VC0 Completion Data Credits */
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S      21
-+
-+/* Applicable to the above three registers */
-+enum {
-+    PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
-+    PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH   = 2,
-+    PCIE_VC0_TLP_QUEUE_MODE_BYPASS        = 4,
-+};
-+
-+/* VC0 Posted Buffer Depth Register */
-+#define PCIE_VC0_PBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES       0x00003FFF /* VC0 Posted Data Queue Depth */
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S     0
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES        0x03FF0000 /* VC0 Posted Header Queue Depth */
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S      16
-+
-+/* VC0 Non-Posted Buffer Depth Register */
-+#define PCIE_VC0_NPBD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES     0x00003FFF /* VC0 Non-Posted Data Queue Depth */
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S   0
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S    16
-+
-+/* VC0 Completion Buffer Depth Register */
-+#define PCIE_VC0_CBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES     0x00003FFF /* C0 Completion Data Queue Depth */
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S   0
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Completion Header Queue Depth */
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S    16
-+
-+/* PHY Status Register, all zeros in VR9 */
-+#define PCIE_PHYSR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
-+
-+/* PHY Control Register, all zeros in VR9 */
-+#define PCIE_PHYCR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
-+
-+/* 
-+ * PCIe PDI PHY register definition, suppose all the following 
-+ * stuff is confidential. 
-+ * XXX, detailed bit definition
-+ */
-+#define	PCIE_PHY_PLL_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
-+#define	PCIE_PHY_PLL_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
-+#define	PCIE_PHY_PLL_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
-+#define	PCIE_PHY_PLL_CTRL4(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
-+#define	PCIE_PHY_PLL_CTRL5(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
-+#define	PCIE_PHY_PLL_CTRL6(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
-+#define	PCIE_PHY_PLL_CTRL7(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
-+#define	PCIE_PHY_PLL_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
-+#define	PCIE_PHY_PLL_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
-+#define	PCIE_PHY_PLL_A_CTRL3(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
-+#define	PCIE_PHY_PLL_STATUS(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
-+ 
-+#define PCIE_PHY_TX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
-+#define PCIE_PHY_TX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
-+#define PCIE_PHY_TX1_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
-+#define PCIE_PHY_TX1_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
-+#define PCIE_PHY_TX1_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
-+#define PCIE_PHY_TX1_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
-+#define PCIE_PHY_TX1_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
-+#define PCIE_PHY_TX1_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
-+
-+#define PCIE_PHY_TX2_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
-+#define PCIE_PHY_TX2_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
-+#define PCIE_PHY_TX2_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
-+#define PCIE_PHY_TX2_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
-+#define PCIE_PHY_TX2_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
-+#define PCIE_PHY_TX2_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
-+#define PCIE_PHY_TX2_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
-+
-+#define PCIE_PHY_RX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
-+#define PCIE_PHY_RX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
-+#define PCIE_PHY_RX1_CDR(X)         (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
-+#define PCIE_PHY_RX1_EI(X)          (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
-+#define PCIE_PHY_RX1_A_CTRL(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
-+
-+/* Interrupt related stuff */
-+#define PCIE_LEGACY_DISABLE 0
-+#define PCIE_LEGACY_INTA  1
-+#define PCIE_LEGACY_INTB  2
-+#define PCIE_LEGACY_INTC  3
-+#define PCIE_LEGACY_INTD  4
-+#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
-+
-+#endif /* IFXMIPS_PCIE_REG_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_vr9.h
-@@ -0,0 +1,269 @@
-+/****************************************************************************
-+                              Copyright (c) 2010
-+                            Lantiq Deutschland GmbH
-+                     Am Campeon 3; 85579 Neubiberg, Germany
-+
-+  For licensing information, see the file 'LICENSE' in the root folder of
-+  this software module.
-+
-+ *****************************************************************************/
-+/*!
-+  \file ifxmips_pcie_vr9.h
-+  \ingroup IFX_PCIE
-+  \brief PCIe RC driver vr9 specific file
-+*/
-+
-+#ifndef IFXMIPS_PCIE_VR9_H
-+#define IFXMIPS_PCIE_VR9_H
-+
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+
-+#include <linux/gpio.h>
-+#include <lantiq_soc.h>
-+
-+#define IFX_PCIE_GPIO_RESET  494
-+
-+#define IFX_REG_R32    ltq_r32
-+#define IFX_REG_W32    ltq_w32
-+#define CONFIG_IFX_PCIE_HW_SWAP
-+#define IFX_RCU_AHB_ENDIAN                      ((volatile u32*)(IFX_RCU + 0x004C))
-+#define IFX_RCU_RST_REQ                         ((volatile u32*)(IFX_RCU + 0x0010))
-+#define IFX_RCU_AHB_BE_PCIE_PDI                  0x00000080  /* Configure PCIE PDI module in big endian*/
-+
-+#define IFX_RCU                                 (KSEG1 | 0x1F203000)
-+#define IFX_RCU_AHB_BE_PCIE_M                    0x00000001  /* Configure AHB master port that connects to PCIe RC in big endian */
-+#define IFX_RCU_AHB_BE_PCIE_S                    0x00000010  /* Configure AHB slave port that connects to PCIe RC in little endian */
-+#define IFX_RCU_AHB_BE_XBAR_M                    0x00000002  /* Configure AHB master port that connects to XBAR in big endian */
-+#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+
-+#define IFX_PMU1_MODULE_PCIE_PHY   (0)
-+#define IFX_PMU1_MODULE_PCIE_CTRL  (1)
-+#define IFX_PMU1_MODULE_PDI        (4)
-+#define IFX_PMU1_MODULE_MSI        (5)
-+
-+#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
-+
-+
-+#define IFX_GPIO				(KSEG1 | 0x1E100B00)
-+#define ALT0			((volatile u32*)(IFX_GPIO + 0x007c))
-+#define ALT1			((volatile u32*)(IFX_GPIO + 0x0080))
-+#define OD			((volatile u32*)(IFX_GPIO + 0x0084))
-+#define DIR			((volatile u32*)(IFX_GPIO + 0x0078))
-+#define OUT			((volatile u32*)(IFX_GPIO + 0x0070))
-+
-+
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+
-+	gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset");
-+	gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
-+	gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-+
-+/*    ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/
-+}
-+
-+static inline void pcie_ahb_pmu_setup(void) 
-+{
-+	/* Enable AHB bus master/slave */
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "ahb");
-+	clk_enable(clk);
-+
-+    //AHBM_PMU_SETUP(IFX_PMU_ENABLE);
-+    //AHBS_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_rcu_endian_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+    reg |= IFX_RCU_AHB_BE_PCIE_M;
-+    reg |= IFX_RCU_AHB_BE_PCIE_S;
-+    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#else 
-+    reg |= IFX_RCU_AHB_BE_PCIE_M;
-+    reg &= ~IFX_RCU_AHB_BE_PCIE_S;
-+    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-+}
-+
-+static inline void pcie_phy_pmu_enable(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "phy");
-+	clk_enable(clk);
-+
-+	//PCIE_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_phy_pmu_disable(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "phy");
-+	clk_disable(clk);
-+
-+//    PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+}
-+
-+static inline void pcie_pdi_big_endian(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* SRAM2PDI endianness control. */
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+    /* Config AHB->PCIe and PDI endianness */
-+    reg |= IFX_RCU_AHB_BE_PCIE_PDI;
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+}
-+
-+static inline void pcie_pdi_pmu_enable(int pcie_port)
-+{
-+    /* Enable PDI to access PCIe PHY register */
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "pdi");
-+	clk_enable(clk);
-+    //PDI_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_core_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+
-+    /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly  */
-+    reg |= 0x00400000;
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_core_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    /* Reset PCIe PHY & Core, bit 22 */
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg &= ~0x00400000;
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg |= 0x00001000; /* Bit 12 */
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg &= ~0x00001000; /* Bit 12 */
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+	gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
-+//    ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+    mdelay(100);
-+	gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
-+//    gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-+    //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_core_pmu_setup(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "ctl");
-+	clk_enable(clk);
-+	clk = clk_get_sys("1d900000.pcie", "bus");
-+	clk_enable(clk);
-+
-+    /* PCIe Core controller enabled */
-+//    PCIE_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
-+
-+    /* Enable PCIe L0 Clock */
-+//  PCIE_L0_CLK_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_msi_init(int pcie_port)
-+{
-+	struct clk *clk;
-+	pcie_msi_pic_init(pcie_port);
-+	clk = clk_get_sys("ltq_pcie", "msi");
-+	clk_enable(clk);
-+//    MSI_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline u32
-+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-+{
-+    u32 tbus_number = bus_number;
-+
-+#ifdef CONFIG_PCI_LANTIQ
-+    if (pcibios_host_nr() > 1) {
-+        tbus_number -= pcibios_1st_host_bus_nr();
-+    }
-+#endif /* CONFIG_PCI_LANTIQ */
-+    return tbus_number;
-+}
-+
-+static inline u32
-+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-+{
-+    struct pci_dev *pdev;
-+    u32 tvalue = value;
-+
-+    /* Sanity check */
-+    pdev = pci_get_slot(bus, devfn);
-+    if (pdev == NULL) {
-+        return tvalue;
-+    }
-+
-+    /* Only care about PCI bridge */
-+    if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-+        return tvalue;
-+    }
-+
-+    if (read) { /* Read hack */
-+    #ifdef CONFIG_PCI_LANTIQ
-+        if (pcibios_host_nr() > 1) {
-+            tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
-+        }
-+    #endif /* CONFIG_PCI_LANTIQ */
-+    }
-+    else { /* Write hack */
-+    #ifdef CONFIG_PCI_LANTIQ
-+        if (pcibios_host_nr() > 1) {
-+            tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
-+        }
-+    #endif
-+    }
-+    return tvalue;
-+}
-+
-+#endif /* IFXMIPS_PCIE_VR9_H */
-+
---- a/arch/mips/pci/pci-legacy.c
-+++ b/arch/mips/pci/pci-legacy.c
-@@ -313,3 +313,30 @@ char *__init pcibios_setup(char *str)
- 		return pcibios_plat_setup(str);
- 	return str;
- }
-+
-+int pcibios_host_nr(void)
-+{
-+    int count = 0;
-+    struct pci_controller *hose;
-+    list_for_each_entry(hose, &controllers, list) {
-+        count++;
-+    }
-+    return count;
-+}
-+EXPORT_SYMBOL(pcibios_host_nr);
-+
-+int pcibios_1st_host_bus_nr(void)
-+{
-+    int bus_nr = 0;
-+    struct pci_controller *hose;
-+
-+    hose = list_first_entry_or_null(&controllers, struct pci_controller, list);
-+
-+    if (hose != NULL) {
-+        if (hose->bus != NULL) {
-+            bus_nr = hose->bus->number + 1;
-+        }
-+    }
-+    return bus_nr;
-+}
-+EXPORT_SYMBOL(pcibios_1st_host_bus_nr);
---- /dev/null
-+++ b/arch/mips/pci/pcie-lantiq.h
-@@ -0,0 +1,1301 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_reg.h
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe module
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+#ifndef IFXMIPS_PCIE_REG_H
-+#define IFXMIPS_PCIE_REG_H
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+/*!
-+ \file ifxmips_pcie_reg.h
-+ \ingroup IFX_PCIE  
-+ \brief header file for PCIe module register definition
-+*/
-+/* PCIe Address Mapping Base */
-+#define PCIE_CFG_PHY_BASE        0x1D000000UL
-+#define PCIE_CFG_BASE           (KSEG1 + PCIE_CFG_PHY_BASE)
-+#define PCIE_CFG_SIZE           (8 * 1024 * 1024)
-+
-+#define PCIE_MEM_PHY_BASE        0x1C000000UL
-+#define PCIE_MEM_BASE           (KSEG1 + PCIE_MEM_PHY_BASE)
-+#define PCIE_MEM_SIZE           (16 * 1024 * 1024)
-+#define PCIE_MEM_PHY_END        (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
-+
-+#define PCIE_IO_PHY_BASE         0x1D800000UL
-+#define PCIE_IO_BASE            (KSEG1 + PCIE_IO_PHY_BASE)
-+#define PCIE_IO_SIZE            (1 * 1024 * 1024)
-+#define PCIE_IO_PHY_END         (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
-+
-+#define PCIE_RC_CFG_BASE        (KSEG1 + 0x1D900000)
-+#define PCIE_APP_LOGIC_REG      (KSEG1 + 0x1E100900)
-+#define PCIE_MSI_PHY_BASE        0x1F600000UL
-+
-+#define PCIE_PDI_PHY_BASE        0x1F106800UL
-+#define PCIE_PDI_BASE           (KSEG1 + PCIE_PDI_PHY_BASE)
-+#define PCIE_PDI_SIZE            0x400
-+
-+#define PCIE1_CFG_PHY_BASE        0x19000000UL
-+#define PCIE1_CFG_BASE           (KSEG1 + PCIE1_CFG_PHY_BASE)
-+#define PCIE1_CFG_SIZE           (8 * 1024 * 1024)
-+
-+#define PCIE1_MEM_PHY_BASE        0x18000000UL
-+#define PCIE1_MEM_BASE           (KSEG1 + PCIE1_MEM_PHY_BASE)
-+#define PCIE1_MEM_SIZE           (16 * 1024 * 1024)
-+#define PCIE1_MEM_PHY_END        (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
-+
-+#define PCIE1_IO_PHY_BASE         0x19800000UL
-+#define PCIE1_IO_BASE            (KSEG1 + PCIE1_IO_PHY_BASE)
-+#define PCIE1_IO_SIZE            (1 * 1024 * 1024)
-+#define PCIE1_IO_PHY_END         (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
-+
-+#define PCIE1_RC_CFG_BASE        (KSEG1 + 0x19900000)
-+#define PCIE1_APP_LOGIC_REG      (KSEG1 + 0x1E100700)
-+#define PCIE1_MSI_PHY_BASE        0x1F400000UL
-+
-+#define PCIE1_PDI_PHY_BASE        0x1F700400UL
-+#define PCIE1_PDI_BASE           (KSEG1 + PCIE1_PDI_PHY_BASE)
-+#define PCIE1_PDI_SIZE            0x400
-+
-+#define PCIE_CFG_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
-+#define PCIE_MEM_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
-+#define PCIE_IO_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_END(X)  ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
-+#define PCIE_IO_PHY_PORT_TO_BASE(X)  ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
-+#define PCIE_IO_PHY_PORT_TO_END(X)   ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
-+#define PCIE_APP_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
-+#define PCIE_RC_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
-+#define PCIE_PHY_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
-+
-+/* PCIe Application Logic Register */
-+/* RC Core Control Register */
-+#define PCIE_RC_CCR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
-+/* This should be enabled after initializing configuratin registers
-+ * Also should check link status retraining bit
-+ */
-+#define PCIE_RC_CCR_LTSSM_ENABLE             0x00000001    /* Enable LTSSM to continue link establishment */
-+
-+/* RC Core Debug Register */
-+#define PCIE_RC_DR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
-+#define PCIE_RC_DR_DLL_UP                    0x00000001  /* Data Link Layer Up */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE       0x0000000E  /* Current Power State */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE_S     1
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE       0x000001F0  /* Current LTSSM State */
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S     4
-+
-+#define PCIE_RC_DR_PM_DEV_STATE              0x00000E00  /* Power Management D-State */
-+#define PCIE_RC_DR_PM_DEV_STATE_S            9
-+
-+#define PCIE_RC_DR_PM_ENABLED                0x00001000  /* Power Management State from PMU */
-+#define PCIE_RC_DR_PME_EVENT_ENABLED         0x00002000  /* Power Management Event Enable State */
-+#define PCIE_RC_DR_AUX_POWER_ENABLED         0x00004000  /* Auxiliary Power Enable */
-+
-+/* Current Power State Definition */
-+enum {
-+    PCIE_RC_DR_D0 = 0,
-+    PCIE_RC_DR_D1,   /* Not supported */
-+    PCIE_RC_DR_D2,   /* Not supported */
-+    PCIE_RC_DR_D3,
-+    PCIE_RC_DR_UN,
-+};
-+
-+/* PHY Link Status Register */
-+#define PCIE_PHY_SR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
-+#define PCIE_PHY_SR_PHY_LINK_UP              0x00000001   /* PHY Link Up/Down Indicator */
-+
-+/* Electromechanical Control Register */
-+#define PCIE_EM_CR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
-+#define PCIE_EM_CR_CARD_IS_PRESENT           0x00000001  /* Card Presence Detect State */
-+#define PCIE_EM_CR_MRL_OPEN                  0x00000002  /* MRL Sensor State */
-+#define PCIE_EM_CR_POWER_FAULT_SET           0x00000004  /* Power Fault Detected */
-+#define PCIE_EM_CR_MRL_SENSOR_SET            0x00000008  /* MRL Sensor Changed */
-+#define PCIE_EM_CR_PRESENT_DETECT_SET        0x00000010  /* Card Presense Detect Changed */
-+#define PCIE_EM_CR_CMD_CPL_INT_SET           0x00000020  /* Command Complete Interrupt */
-+#define PCIE_EM_CR_SYS_INTERLOCK_SET         0x00000040  /* System Electromechanical IterLock Engaged */
-+#define PCIE_EM_CR_ATTENTION_BUTTON_SET      0x00000080  /* Attention Button Pressed */
-+
-+/* Interrupt Status Register */
-+#define PCIE_IR_SR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
-+#define PCIE_IR_SR_PME_CAUSE_MSI             0x00000002  /* MSI caused by PME */
-+#define PCIE_IR_SR_HP_PME_WAKE_GEN           0x00000004  /* Hotplug PME Wake Generation */
-+#define PCIE_IR_SR_HP_MSI                    0x00000008  /* Hotplug MSI */
-+#define PCIE_IR_SR_AHB_LU_ERR                0x00000030  /* AHB Bridge Lookup Error Signals */
-+#define PCIE_IR_SR_AHB_LU_ERR_S              4
-+#define PCIE_IR_SR_INT_MSG_NUM               0x00003E00  /* Interrupt Message Number */
-+#define PCIE_IR_SR_INT_MSG_NUM_S             9
-+#define PCIE_IR_SR_AER_INT_MSG_NUM           0xF8000000  /* Advanced Error Interrupt Message Number */
-+#define PCIE_IR_SR_AER_INT_MSG_NUM_S         27
-+
-+/* Message Control Register */
-+#define PCIE_MSG_CR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
-+#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG     0x00000001  /* Generate PME Turn Off Message */
-+#define PCIE_MSG_CR_GEN_UNLOCK_MSG           0x00000002  /* Generate Unlock Message */
-+
-+#define PCIE_VDM_DR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
-+
-+/* Vendor-Defined Message Requester ID Register */
-+#define PCIE_VDM_RID(X)                     (PCIE_APP_PORT_TO_BASE (X) + 0x38)
-+#define PCIE_VDM_RID_VENROR_MSG_REQ_ID       0x0000FFFF
-+#define PCIE_VDM_RID_VDMRID_S                0
-+
-+/* ASPM Control Register */
-+#define PCIE_ASPM_CR(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
-+#define PCIE_ASPM_CR_HOT_RST                 0x00000001  /* Hot Reset Request to the downstream device */
-+#define PCIE_ASPM_CR_REQ_EXIT_L1             0x00000002  /* Request to Exit L1 */
-+#define PCIE_ASPM_CR_REQ_ENTER_L1            0x00000004  /* Request to Enter L1 */
-+
-+/* Vendor Message DW0 Register */
-+#define PCIE_VM_MSG_DW0(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
-+#define PCIE_VM_MSG_DW0_TYPE                 0x0000001F  /* Message type */
-+#define PCIE_VM_MSG_DW0_TYPE_S               0
-+#define PCIE_VM_MSG_DW0_FORMAT               0x00000060  /* Format */
-+#define PCIE_VM_MSG_DW0_FORMAT_S             5
-+#define PCIE_VM_MSG_DW0_TC                   0x00007000  /* Traffic Class */
-+#define PCIE_VM_MSG_DW0_TC_S                 12
-+#define PCIE_VM_MSG_DW0_ATTR                 0x000C0000  /* Atrributes */
-+#define PCIE_VM_MSG_DW0_ATTR_S               18
-+#define PCIE_VM_MSG_DW0_EP_TLP               0x00100000  /* Poisoned TLP */
-+#define PCIE_VM_MSG_DW0_TD                   0x00200000  /* TLP Digest */
-+#define PCIE_VM_MSG_DW0_LEN                  0xFFC00000  /* Length */
-+#define PCIE_VM_MSG_DW0_LEN_S                22
-+
-+/* Format Definition */
-+enum {
-+    PCIE_VM_MSG_FORMAT_00 = 0,  /* 3DW Hdr, no data*/
-+    PCIE_VM_MSG_FORMAT_01,      /* 4DW Hdr, no data */
-+    PCIE_VM_MSG_FORMAT_10,      /* 3DW Hdr, with data */
-+    PCIE_VM_MSG_FORMAT_11,      /* 4DW Hdr, with data */
-+};
-+
-+/* Traffic Class Definition */
-+enum {
-+    PCIE_VM_MSG_TC0 = 0,
-+    PCIE_VM_MSG_TC1,
-+    PCIE_VM_MSG_TC2,
-+    PCIE_VM_MSG_TC3,
-+    PCIE_VM_MSG_TC4,
-+    PCIE_VM_MSG_TC5,
-+    PCIE_VM_MSG_TC6,
-+    PCIE_VM_MSG_TC7,
-+};
-+
-+/* Attributes Definition */
-+enum {
-+    PCIE_VM_MSG_ATTR_00 = 0,   /* RO and No Snoop cleared */
-+    PCIE_VM_MSG_ATTR_01,       /* RO cleared , No Snoop set */
-+    PCIE_VM_MSG_ATTR_10,       /* RO set, No Snoop cleared*/
-+    PCIE_VM_MSG_ATTR_11,       /* RO and No Snoop set */
-+};
-+
-+/* Payload Size Definition */
-+#define PCIE_VM_MSG_LEN_MIN  0
-+#define PCIE_VM_MSG_LEN_MAX  1024
-+
-+/* Vendor Message DW1 Register */
-+#define PCIE_VM_MSG_DW1(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
-+#define PCIE_VM_MSG_DW1_FUNC_NUM            0x00000070  /* Function Number */
-+#define PCIE_VM_MSG_DW1_FUNC_NUM_S          8
-+#define PCIE_VM_MSG_DW1_CODE                0x00FF0000  /* Message Code */
-+#define PCIE_VM_MSG_DW1_CODE_S              16
-+#define PCIE_VM_MSG_DW1_TAG                 0xFF000000  /* Tag */
-+#define PCIE_VM_MSG_DW1_TAG_S               24
-+
-+#define PCIE_VM_MSG_DW2(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
-+#define PCIE_VM_MSG_DW3(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
-+
-+/* Vendor Message Request Register */
-+#define PCIE_VM_MSG_REQR(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
-+#define PCIE_VM_MSG_REQR_REQ                 0x00000001  /* Vendor Message Request */
-+
-+
-+/* AHB Slave Side Band Control Register */
-+#define PCIE_AHB_SSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
-+#define PCIE_AHB_SSB_REQ_BCM                0x00000001 /* Slave Reques BCM filed */
-+#define PCIE_AHB_SSB_REQ_EP                 0x00000002 /* Slave Reques EP filed */
-+#define PCIE_AHB_SSB_REQ_TD                 0x00000004 /* Slave Reques TD filed */
-+#define PCIE_AHB_SSB_REQ_ATTR               0x00000018 /* Slave Reques Attribute number */
-+#define PCIE_AHB_SSB_REQ_ATTR_S             3
-+#define PCIE_AHB_SSB_REQ_TC                 0x000000E0 /* Slave Request TC Field */
-+#define PCIE_AHB_SSB_REQ_TC_S               5
-+
-+/* AHB Master SideBand Ctrl Register */
-+#define PCIE_AHB_MSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
-+#define PCIE_AHB_MSB_RESP_ATTR               0x00000003 /* Master Response Attribute number */
-+#define PCIE_AHB_MSB_RESP_ATTR_S             0
-+#define PCIE_AHB_MSB_RESP_BAD_EOT            0x00000004 /* Master Response Badeot filed */
-+#define PCIE_AHB_MSB_RESP_BCM                0x00000008 /* Master Response BCM filed */
-+#define PCIE_AHB_MSB_RESP_EP                 0x00000010 /* Master Response EP filed */
-+#define PCIE_AHB_MSB_RESP_TD                 0x00000020 /* Master Response TD filed */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM            0x000003C0 /* Master Response Function number */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM_S          6
-+
-+/* AHB Control Register, fixed bus enumeration exception */
-+#define PCIE_AHB_CTRL(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
-+#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS     0x00000001 
-+
-+/* Interrupt Enalbe Register */
-+#define PCIE_IRNEN(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
-+#define PCIE_IRNCR(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
-+#define PCIE_IRNICR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
-+
-+/* PCIe interrupt enable/control/capture register definition */
-+#define PCIE_IRN_AER_REPORT                 0x00000001  /* AER Interrupt */
-+#define PCIE_IRN_AER_MSIX                   0x00000002  /* Advanced Error MSI-X Interrupt */
-+#define PCIE_IRN_PME                        0x00000004  /* PME Interrupt */
-+#define PCIE_IRN_HOTPLUG                    0x00000008  /* Hotplug Interrupt */
-+#define PCIE_IRN_RX_VDM_MSG                 0x00000010  /* Vendor-Defined Message Interrupt */
-+#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG     0x00000020  /* Correctable Error Message Interrupt */
-+#define PCIE_IRN_RX_NON_FATAL_ERR_MSG       0x00000040  /* Non-fatal Error Message */
-+#define PCIE_IRN_RX_FATAL_ERR_MSG           0x00000080  /* Fatal Error Message */
-+#define PCIE_IRN_RX_PME_MSG                 0x00000100  /* PME Message Interrupt */
-+#define PCIE_IRN_RX_PME_TURNOFF_ACK         0x00000200  /* PME Turnoff Ack Message Interrupt */
-+#define PCIE_IRN_AHB_BR_FATAL_ERR           0x00000400  /* AHB Fatal Error Interrupt */
-+#define PCIE_IRN_LINK_AUTO_BW_STATUS        0x00000800  /* Link Auto Bandwidth Status Interrupt */
-+#define PCIE_IRN_BW_MGT                     0x00001000  /* Bandwidth Managment Interrupt */
-+#define PCIE_IRN_INTA                       0x00002000  /* INTA */
-+#define PCIE_IRN_INTB                       0x00004000  /* INTB */
-+#define PCIE_IRN_INTC                       0x00008000  /* INTC */
-+#define PCIE_IRN_INTD                       0x00010000  /* INTD */
-+#define PCIE_IRN_WAKEUP                     0x00020000  /* Wake up Interrupt */
-+
-+#define PCIE_RC_CORE_COMBINED_INT    (PCIE_IRN_AER_REPORT |  PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
-+                                      PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
-+                                      PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
-+                                      PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
-+                                      PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
-+/* PCIe RC Configuration Register */
-+#define PCIE_VDID(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
-+
-+/* Bit definition from pci_reg.h */
-+#define PCIE_PCICMDSTS(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
-+#define PCIE_CCRID(X)               (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
-+#define PCIE_CLSLTHTBR(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
-+/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
-+#define PCIE_BAR0(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
-+#define PCIE_BAR1(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
-+
-+#define PCIE_BNR(X)                 (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
-+/* Bus Number Register bits */
-+#define PCIE_BNR_PRIMARY_BUS_NUM             0x000000FF
-+#define PCIE_BNR_PRIMARY_BUS_NUM_S           0
-+#define PCIE_PNR_SECONDARY_BUS_NUM           0x0000FF00
-+#define PCIE_PNR_SECONDARY_BUS_NUM_S         8
-+#define PCIE_PNR_SUB_BUS_NUM                 0x00FF0000
-+#define PCIE_PNR_SUB_BUS_NUM_S               16
-+
-+/* IO Base/Limit Register bits */
-+#define PCIE_IOBLSECS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C)  /* RC only */
-+#define PCIE_IOBLSECS_32BIT_IO_ADDR             0x00000001
-+#define PCIE_IOBLSECS_IO_BASE_ADDR              0x000000F0
-+#define PCIE_IOBLSECS_IO_BASE_ADDR_S            4
-+#define PCIE_IOBLSECS_32BIT_IOLIMT              0x00000100
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR             0x0000F000
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S           12
-+
-+/* Non-prefetchable Memory Base/Limit Register bit */
-+#define PCIE_MBML(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20)  /* RC only */
-+#define PCIE_MBML_MEM_BASE_ADDR                 0x0000FFF0
-+#define PCIE_MBML_MEM_BASE_ADDR_S               4
-+#define PCIE_MBML_MEM_LIMIT_ADDR                0xFFF00000
-+#define PCIE_MBML_MEM_LIMIT_ADDR_S              20
-+
-+/* Prefetchable Memory Base/Limit Register bit */
-+#define PCIE_PMBL(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24)  /* RC only */
-+#define PCIE_PMBL_64BIT_ADDR                    0x00000001
-+#define PCIE_PMBL_UPPER_12BIT                   0x0000FFF0
-+#define PCIE_PMBL_UPPER_12BIT_S                 4
-+#define PCIE_PMBL_E64MA                         0x00010000
-+#define PCIE_PMBL_END_ADDR                      0xFFF00000
-+#define PCIE_PMBL_END_ADDR_S                    20
-+#define PCIE_PMBU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28)  /* RC only */
-+#define PCIE_PMLU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C)  /* RC only */
-+
-+/* I/O Base/Limit Upper 16 bits register */
-+#define PCIE_IO_BANDL(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30)  /* RC only */
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE        0x0000FFFF
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S      0
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT       0xFFFF0000
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S     16
-+
-+#define PCIE_CPR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
-+#define PCIE_EBBAR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
-+
-+/* Interrupt and Secondary Bridge Control Register */
-+#define PCIE_INTRBCTRL(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
-+
-+#define PCIE_INTRBCTRL_INT_LINE                 0x000000FF
-+#define PCIE_INTRBCTRL_INT_LINE_S               0
-+#define PCIE_INTRBCTRL_INT_PIN                  0x0000FF00
-+#define PCIE_INTRBCTRL_INT_PIN_S                8
-+#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE   0x00010000    /* #PERR */
-+#define PCIE_INTRBCTRL_SERR_ENABLE              0x00020000    /* #SERR */
-+#define PCIE_INTRBCTRL_ISA_ENABLE               0x00040000    /* ISA enable, IO 64KB only */
-+#define PCIE_INTRBCTRL_VGA_ENABLE               0x00080000    /* VGA enable */
-+#define PCIE_INTRBCTRL_VGA_16BIT_DECODE         0x00100000    /* VGA 16bit decode */
-+#define PCIE_INTRBCTRL_RST_SECONDARY_BUS        0x00400000    /* Secondary bus rest, hot rest, 1ms */
-+/* Others are read only */
-+enum {
-+    PCIE_INTRBCTRL_INT_NON = 0,
-+    PCIE_INTRBCTRL_INTA,
-+    PCIE_INTRBCTRL_INTB,
-+    PCIE_INTRBCTRL_INTC,
-+    PCIE_INTRBCTRL_INTD,
-+};
-+
-+#define PCIE_PM_CAPR(X)                  (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
-+
-+/* Power Management Control and Status Register */
-+#define PCIE_PM_CSR(X)                   (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
-+
-+#define PCIE_PM_CSR_POWER_STATE           0x00000003   /* Power State */
-+#define PCIE_PM_CSR_POWER_STATE_S         0
-+#define PCIE_PM_CSR_SW_RST                0x00000008   /* Soft Reset Enabled */
-+#define PCIE_PM_CSR_PME_ENABLE            0x00000100   /* PME Enable */
-+#define PCIE_PM_CSR_PME_STATUS            0x00008000   /* PME status */
-+
-+/* MSI Capability Register for EP */
-+#define PCIE_MCAPR(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
-+
-+#define PCIE_MCAPR_MSI_CAP_ID             0x000000FF  /* MSI Capability ID */
-+#define PCIE_MCAPR_MSI_CAP_ID_S           0
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR       0x0000FF00  /* Next Capability Pointer */
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S     8
-+#define PCIE_MCAPR_MSI_ENABLE             0x00010000  /* MSI Enable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP          0x000E0000  /* Multiple Message Capable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP_S        17
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE       0x00700000  /* Multiple Message Enable */
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE_S     20
-+#define PCIE_MCAPR_ADDR64_CAP             0X00800000  /* 64-bit Address Capable */
-+
-+/* MSI Message Address Register */
-+#define PCIE_MA(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
-+
-+#define PCIE_MA_ADDR_MASK                 0xFFFFFFFC  /* Message Address */
-+
-+/* MSI Message Upper Address Register */
-+#define PCIE_MUA(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
-+
-+/* MSI Message Data Register */
-+#define PCIE_MD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
-+
-+#define PCIE_MD_DATA                      0x0000FFFF  /* Message Data */
-+#define PCIE_MD_DATA_S                    0
-+
-+/* PCI Express Capability Register */
-+#define PCIE_XCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
-+
-+#define PCIE_XCAP_ID                      0x000000FF  /* PCI Express Capability ID */
-+#define PCIE_XCAP_ID_S                    0
-+#define PCIE_XCAP_NEXT_CAP                0x0000FF00  /* Next Capability Pointer */
-+#define PCIE_XCAP_NEXT_CAP_S              8
-+#define PCIE_XCAP_VER                     0x000F0000  /* PCI Express Capability Version */
-+#define PCIE_XCAP_VER_S                   16
-+#define PCIE_XCAP_DEV_PORT_TYPE           0x00F00000  /* Device Port Type */
-+#define PCIE_XCAP_DEV_PORT_TYPE_S         20
-+#define PCIE_XCAP_SLOT_IMPLEMENTED        0x01000000  /* Slot Implemented */
-+#define PCIE_XCAP_MSG_INT_NUM             0x3E000000  /* Interrupt Message Number */
-+#define PCIE_XCAP_MSG_INT_NUM_S           25
-+
-+/* Device Capability Register */
-+#define PCIE_DCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
-+
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE        0x00000007   /* Max Payload size */
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S      0
-+#define PCIE_DCAP_PHANTOM_FUNC            0x00000018   /* Phanton Function, not supported */
-+#define PCIE_DCAP_PHANTOM_FUNC_S          3
-+#define PCIE_DCAP_EXT_TAG                 0x00000020   /* Extended Tag Field */
-+#define PCIE_DCAP_EP_L0S_LATENCY          0x000001C0   /* EP L0s latency only */
-+#define PCIE_DCAP_EP_L0S_LATENCY_S        6
-+#define PCIE_DCAP_EP_L1_LATENCY           0x00000E00   /* EP L1 latency only */
-+#define PCIE_DCAP_EP_L1_LATENCY_S         9
-+#define PCIE_DCAP_ROLE_BASE_ERR_REPORT    0x00008000   /* Role Based ERR */
-+
-+/* Maximum payload size supported */
-+enum {
-+    PCIE_MAX_PAYLOAD_128 = 0,
-+    PCIE_MAX_PAYLOAD_256,
-+    PCIE_MAX_PAYLOAD_512,
-+    PCIE_MAX_PAYLOAD_1024,
-+    PCIE_MAX_PAYLOAD_2048,
-+    PCIE_MAX_PAYLOAD_4096,
-+};
-+
-+/* Device Control and Status Register */
-+#define PCIE_DCTLSTS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
-+
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN        0x00000001   /* COR-ERR */
-+#define PCIE_DCTLSTS_NONFATAL_ERR_EN           0x00000002   /* Non-fatal ERR */
-+#define PCIE_DCTLSTS_FATAL_ERR_EN              0x00000004   /* Fatal ERR */
-+#define PCIE_DCTLSYS_UR_REQ_EN                 0x00000008   /* UR ERR */
-+#define PCIE_DCTLSTS_RELAXED_ORDERING_EN       0x00000010   /* Enable relaxing ordering */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE          0x000000E0   /* Max payload mask */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S        5
-+#define PCIE_DCTLSTS_EXT_TAG_EN                0x00000100   /* Extended tag field */
-+#define PCIE_DCTLSTS_PHANTOM_FUNC_EN           0x00000200   /* Phantom Function Enable */
-+#define PCIE_DCTLSTS_AUX_PM_EN                 0x00000400   /* AUX Power PM Enable */
-+#define PCIE_DCTLSTS_NO_SNOOP_EN               0x00000800   /* Enable no snoop, except root port*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE             0x00007000   /* Max Read Request size*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE_S           12
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR           0x00010000   /* COR-ERR Detected */
-+#define PCIE_DCTLSTS_NONFATAL_ERR              0x00020000   /* Non-Fatal ERR Detected */
-+#define PCIE_DCTLSTS_FATAL_ER                  0x00040000   /* Fatal ERR Detected */
-+#define PCIE_DCTLSTS_UNSUPPORTED_REQ           0x00080000   /* UR Detected */
-+#define PCIE_DCTLSTS_AUX_POWER                 0x00100000   /* Aux Power Detected */
-+#define PCIE_DCTLSTS_TRANSACT_PENDING          0x00200000   /* Transaction pending */
-+
-+#define PCIE_DCTLSTS_ERR_EN      (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
-+                                  PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
-+                                  PCIE_DCTLSYS_UR_REQ_EN)
-+
-+/* Link Capability Register */
-+#define PCIE_LCAP(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
-+#define PCIE_LCAP_MAX_LINK_SPEED               0x0000000F  /* Max link speed, 0x1 by default */
-+#define PCIE_LCAP_MAX_LINK_SPEED_S             0
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH             0x000003F0  /* Maxium Length Width */
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH_S           4
-+#define PCIE_LCAP_ASPM_LEVEL                   0x00000C00  /* Active State Link PM Support */
-+#define PCIE_LCAP_ASPM_LEVEL_S                 10
-+#define PCIE_LCAP_L0S_EIXT_LATENCY             0x00007000  /* L0s Exit Latency */
-+#define PCIE_LCAP_L0S_EIXT_LATENCY_S           12
-+#define PCIE_LCAP_L1_EXIT_LATENCY              0x00038000  /* L1 Exit Latency */
-+#define PCIE_LCAP_L1_EXIT_LATENCY_S            15
-+#define PCIE_LCAP_CLK_PM                       0x00040000  /* Clock Power Management */
-+#define PCIE_LCAP_SDER                         0x00080000  /* Surprise Down Error Reporting */
-+#define PCIE_LCAP_DLL_ACTIVE_REPROT            0x00100000  /* Data Link Layer Active Reporting Capable */
-+#define PCIE_LCAP_PORT_NUM                     0xFF0000000  /* Port number */
-+#define PCIE_LCAP_PORT_NUM_S                   24
-+
-+/* Maximum Length width definition */
-+#define PCIE_MAX_LENGTH_WIDTH_RES  0x00
-+#define PCIE_MAX_LENGTH_WIDTH_X1   0x01  /* Default */
-+#define PCIE_MAX_LENGTH_WIDTH_X2   0x02
-+#define PCIE_MAX_LENGTH_WIDTH_X4   0x04
-+#define PCIE_MAX_LENGTH_WIDTH_X8   0x08
-+#define PCIE_MAX_LENGTH_WIDTH_X12  0x0C
-+#define PCIE_MAX_LENGTH_WIDTH_X16  0x10
-+#define PCIE_MAX_LENGTH_WIDTH_X32  0x20
-+
-+/* Active State Link PM definition */
-+enum {
-+    PCIE_ASPM_RES0                = 0,
-+    PCIE_ASPM_L0S_ENTRY_SUPPORT,        /* L0s */
-+    PCIE_ASPM_RES1,
-+    PCIE_ASPM_L0S_L1_ENTRY_SUPPORT,     /* L0s and L1, default */
-+};
-+
-+/* L0s Exit Latency definition */
-+enum {
-+    PCIE_L0S_EIXT_LATENCY_L64NS    = 0, /* < 64 ns */
-+    PCIE_L0S_EIXT_LATENCY_B64A128,      /* > 64 ns < 128 ns */
-+    PCIE_L0S_EIXT_LATENCY_B128A256,     /* > 128 ns < 256 ns */
-+    PCIE_L0S_EIXT_LATENCY_B256A512,     /* > 256 ns < 512 ns */
-+    PCIE_L0S_EIXT_LATENCY_B512TO1U,     /* > 512 ns < 1 us */
-+    PCIE_L0S_EIXT_LATENCY_B1A2U,        /* > 1 us < 2 us */
-+    PCIE_L0S_EIXT_LATENCY_B2A4U,        /* > 2 us < 4 us */
-+    PCIE_L0S_EIXT_LATENCY_M4US,         /* > 4 us  */
-+};
-+
-+/* L1 Exit Latency definition */
-+enum {
-+    PCIE_L1_EXIT_LATENCY_L1US  = 0,  /* < 1 us */
-+    PCIE_L1_EXIT_LATENCY_B1A2,       /* > 1 us < 2 us */
-+    PCIE_L1_EXIT_LATENCY_B2A4,       /* > 2 us < 4 us */
-+    PCIE_L1_EXIT_LATENCY_B4A8,       /* > 4 us < 8 us */
-+    PCIE_L1_EXIT_LATENCY_B8A16,      /* > 8 us < 16 us */
-+    PCIE_L1_EXIT_LATENCY_B16A32,     /* > 16 us < 32 us */
-+    PCIE_L1_EXIT_LATENCY_B32A64,     /* > 32 us < 64 us */
-+    PCIE_L1_EXIT_LATENCY_M64US,      /* > 64 us */
-+};
-+
-+/* Link Control and Status Register */
-+#define PCIE_LCTLSTS(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
-+#define PCIE_LCTLSTS_ASPM_ENABLE            0x00000003  /* Active State Link PM Control */
-+#define PCIE_LCTLSTS_ASPM_ENABLE_S          0
-+#define PCIE_LCTLSTS_RCB128                 0x00000008  /* Read Completion Boundary 128*/
-+#define PCIE_LCTLSTS_LINK_DISABLE           0x00000010  /* Link Disable */
-+#define PCIE_LCTLSTS_RETRIAN_LINK           0x00000020  /* Retrain Link */
-+#define PCIE_LCTLSTS_COM_CLK_CFG            0x00000040  /* Common Clock Configuration */
-+#define PCIE_LCTLSTS_EXT_SYNC               0x00000080  /* Extended Synch */
-+#define PCIE_LCTLSTS_CLK_PM_EN              0x00000100  /* Enable Clock Powerm Management */
-+#define PCIE_LCTLSTS_LINK_SPEED             0x000F0000  /* Link Speed */
-+#define PCIE_LCTLSTS_LINK_SPEED_S           16
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH  0x03F00000  /* Negotiated Link Width */
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
-+#define PCIE_LCTLSTS_RETRAIN_PENDING        0x08000000  /* Link training is ongoing */
-+#define PCIE_LCTLSTS_SLOT_CLK_CFG           0x10000000  /* Slot Clock Configuration */
-+#define PCIE_LCTLSTS_DLL_ACTIVE             0x20000000  /* Data Link Layer Active */
-+
-+/* Slot Capabilities Register */
-+#define PCIE_SLCAP(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
-+
-+/* Slot Capabilities */
-+#define PCIE_SLCTLSTS(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
-+
-+/* Root Control and Capability Register */
-+#define PCIE_RCTLCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
-+#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR  0x00000001   /* #SERR on COR-ERR */
-+#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR     0x00000002   /* #SERR on Non-Fatal ERR */
-+#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR        0x00000004   /* #SERR on Fatal ERR */
-+#define PCIE_RCTLCAP_PME_INT_EN               0x00000008   /* PME Interrupt Enable */
-+#define PCIE_RCTLCAP_SERR_ENABLE    (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
-+                                     PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
-+/* Root Status Register */
-+#define PCIE_RSTS(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
-+#define PCIE_RSTS_PME_REQ_ID                   0x0000FFFF   /* PME Request ID */
-+#define PCIE_RSTS_PME_REQ_ID_S                 0
-+#define PCIE_RSTS_PME_STATUS                   0x00010000   /* PME Status */
-+#define PCIE_RSTS_PME_PENDING                  0x00020000   /* PME Pending */
-+
-+/* PCI Express Enhanced Capability Header */
-+#define PCIE_ENHANCED_CAP(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
-+#define PCIE_ENHANCED_CAP_ID                 0x0000FFFF  /* PCI Express Extended Capability ID */
-+#define PCIE_ENHANCED_CAP_ID_S               0
-+#define PCIE_ENHANCED_CAP_VER                0x000F0000  /* Capability Version */
-+#define PCIE_ENHANCED_CAP_VER_S              16
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET        0xFFF00000  /* Next Capability Offset */
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S      20
-+
-+/* Uncorrectable Error Status Register */
-+#define PCIE_UES_R(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
-+#define PCIE_DATA_LINK_PROTOCOL_ERR          0x00000010  /* Data Link Protocol Error Status */
-+#define PCIE_SURPRISE_DOWN_ERROR             0x00000020  /* Surprise Down Error Status */
-+#define PCIE_POISONED_TLP                    0x00001000  /* Poisoned TLP Status */
-+#define PCIE_FC_PROTOCOL_ERR                 0x00002000  /* Flow Control Protocol Error Status */
-+#define PCIE_COMPLETION_TIMEOUT              0x00004000  /* Completion Timeout Status */
-+#define PCIE_COMPLETOR_ABORT                 0x00008000  /* Completer Abort Error */
-+#define PCIE_UNEXPECTED_COMPLETION           0x00010000  /* Unexpected Completion Status */
-+#define PCIE_RECEIVER_OVERFLOW               0x00020000  /* Receive Overflow Status */
-+#define PCIE_MALFORNED_TLP                   0x00040000  /* Malformed TLP Stauts */
-+#define PCIE_ECRC_ERR                        0x00080000  /* ECRC Error Stauts */
-+#define PCIE_UR_REQ                          0x00100000  /* Unsupported Request Error Status */
-+#define PCIE_ALL_UNCORRECTABLE_ERR    (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
-+                         PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT |   \
-+                         PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
-+                         PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
-+
-+/* Uncorrectable Error Mask Register, Mask means no report */
-+#define PCIE_UEMR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
-+
-+/* Uncorrectable Error Severity Register */
-+#define PCIE_UESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
-+
-+/* Correctable Error Status Register */
-+#define PCIE_CESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
-+#define PCIE_RX_ERR                          0x00000001  /* Receive Error Status */
-+#define PCIE_BAD_TLP                         0x00000040  /* Bad TLP Status */
-+#define PCIE_BAD_DLLP                        0x00000080  /* Bad DLLP Status */
-+#define PCIE_REPLAY_NUM_ROLLOVER             0x00000100  /* Replay Number Rollover Status */
-+#define PCIE_REPLAY_TIMER_TIMEOUT_ERR        0x00001000  /* Reply Timer Timeout Status */
-+#define PCIE_ADVISORY_NONFTAL_ERR            0x00002000  /* Advisory Non-Fatal Error Status */
-+#define PCIE_CORRECTABLE_ERR        (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
-+                                     PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
-+
-+/* Correctable Error Mask Register */
-+#define PCIE_CEMR(X)                        (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
-+
-+/* Advanced Error Capabilities and Control Register */
-+#define PCIE_AECCR(X)                       (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
-+#define PCIE_AECCR_FIRST_ERR_PTR            0x0000001F  /* First Error Pointer */
-+#define PCIE_AECCR_FIRST_ERR_PTR_S          0
-+#define PCIE_AECCR_ECRC_GEN_CAP             0x00000020  /* ECRC Generation Capable */
-+#define PCIE_AECCR_ECRC_GEN_EN              0x00000040  /* ECRC Generation Enable */
-+#define PCIE_AECCR_ECRC_CHECK_CAP           0x00000080  /* ECRC Check Capable */
-+#define PCIE_AECCR_ECRC_CHECK_EN            0x00000100  /* ECRC Check Enable */
-+
-+/* Header Log Register 1 */
-+#define PCIE_HLR1(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
-+
-+/* Header Log Register 2 */
-+#define PCIE_HLR2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
-+
-+/* Header Log Register 3 */
-+#define PCIE_HLR3(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
-+
-+/* Header Log Register 4 */
-+#define PCIE_HLR4(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
-+
-+/* Root Error Command Register */
-+#define PCIE_RECR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
-+#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN  0x00000001 /* COR-ERR */
-+#define PCIE_RECR_NONFATAL_ERR_REPORT_EN     0x00000002 /* Non-Fatal ERR */
-+#define PCIE_RECR_FATAL_ERR_REPORT_EN        0x00000004 /* Fatal ERR */
-+#define PCIE_RECR_ERR_REPORT_EN  (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
-+                PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
-+
-+/* Root Error Status Register */
-+#define PCIE_RESR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
-+#define PCIE_RESR_CORRECTABLE_ERR                0x00000001   /* COR-ERR Receveid */
-+#define PCIE_RESR_MULTI_CORRECTABLE_ERR          0x00000002   /* Multiple COR-ERR Received */
-+#define PCIE_RESR_FATAL_NOFATAL_ERR              0x00000004   /* ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR        0x00000008   /* Multiple ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR  0x00000010   /* First UN-COR Fatal */
-+#define PCIR_RESR_NON_FATAL_ERR                  0x00000020   /* Non-Fatal Error Message Received */
-+#define PCIE_RESR_FATAL_ERR                      0x00000040   /* Fatal Message Received */
-+#define PCIE_RESR_AER_INT_MSG_NUM                0xF8000000   /* Advanced Error Interrupt Message Number */
-+#define PCIE_RESR_AER_INT_MSG_NUM_S              27
-+
-+/* Error Source Indentification Register */
-+#define PCIE_ESIR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID         0x0000FFFF
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S       0
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID         0xFFFF0000
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S       16
-+
-+/* VC Enhanced Capability Header */
-+#define PCIE_VC_ECH(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
-+
-+/* Port VC Capability Register */
-+#define PCIE_PVC1(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
-+#define PCIE_PVC1_EXT_VC_CNT                    0x00000007  /* Extended VC Count */
-+#define PCIE_PVC1_EXT_VC_CNT_S                  0
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT            0x00000070  /* Low Priority Extended VC Count */
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S          4
-+#define PCIE_PVC1_REF_CLK                       0x00000300  /* Reference Clock */
-+#define PCIE_PVC1_REF_CLK_S                     8
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE       0x00000C00  /* Port Arbitration Table Entry Size */
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S     10
-+
-+/* Extended Virtual Channel Count Defintion */
-+#define PCIE_EXT_VC_CNT_MIN   0
-+#define PCIE_EXT_VC_CNT_MAX   7
-+
-+/* Port Arbitration Table Entry Size Definition */
-+enum {
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
-+};
-+
-+/* Port VC Capability Register 2 */
-+#define PCIE_PVC2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
-+#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR      0x00000001  /* HW Fixed arbitration, 16 phase WRR */
-+#define PCIE_PVC2_VC_ARB_32P_WRR            0x00000002  /* 32 phase WRR */
-+#define PCIE_PVC2_VC_ARB_64P_WRR            0x00000004  /* 64 phase WRR */
-+#define PCIE_PVC2_VC_ARB_128P_WRR           0x00000008  /* 128 phase WRR */
-+#define PCIE_PVC2_VC_ARB_WRR                0x0000000F
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET         0xFF000000  /* VC arbitration table offset, not support */
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S       24
-+
-+/* Port VC Control and Status Register */     
-+#define PCIE_PVCCRSR(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
-+#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB         0x00000001  /* Load VC Arbitration Table */
-+#define PCIE_PVCCRSR_VC_ARB_SEL              0x0000000E  /* VC Arbitration Select */
-+#define PCIE_PVCCRSR_VC_ARB_SEL_S            1
-+#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS       0x00010000  /* Arbitration Status */
-+
-+/* VC0 Resource Capability Register */
-+#define PCIE_VC0_RC(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
-+#define PCIE_VC0_RC_PORT_ARB_HW_FIXED        0x00000001  /* HW Fixed arbitration */
-+#define PCIE_VC0_RC_PORT_ARB_32P_WRR         0x00000002  /* 32 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_64P_WRR         0x00000004  /* 64 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_128P_WRR        0x00000008  /* 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR     0x00000010  /* Time-based 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR     0x00000020  /* Time-based 256 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB          (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
-+                        PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
-+                        PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
-+
-+#define PCIE_VC0_RC_REJECT_SNOOP             0x00008000  /* Reject Snoop Transactioin */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS            0x007F0000  /* Maximum time Slots */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS_S          16
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET      0xFF000000  /* Port Arbitration Table Offset */
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S    24
-+
-+/* VC0 Resource Control Register */
-+#define PCIE_VC0_RC0(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
-+#define PCIE_VC0_RC0_TVM0                    0x00000001  /* TC0 and VC0 */
-+#define PCIE_VC0_RC0_TVM1                    0x00000002  /* TC1 and VC1 */
-+#define PCIE_VC0_RC0_TVM2                    0x00000004  /* TC2 and VC2 */
-+#define PCIE_VC0_RC0_TVM3                    0x00000008  /* TC3 and VC3 */
-+#define PCIE_VC0_RC0_TVM4                    0x00000010  /* TC4 and VC4 */
-+#define PCIE_VC0_RC0_TVM5                    0x00000020  /* TC5 and VC5 */
-+#define PCIE_VC0_RC0_TVM6                    0x00000040  /* TC6 and VC6 */
-+#define PCIE_VC0_RC0_TVM7                    0x00000080  /* TC7 and VC7 */
-+#define PCIE_VC0_RC0_TC_VC                   0x000000FF  /* TC/VC mask */
-+
-+#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB       0x00010000  /* Load Port Arbitration Table */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL            0x000E0000  /* Port Arbitration Select */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL_S          17
-+#define PCIE_VC0_RC0_VC_ID                   0x07000000  /* VC ID */
-+#define PCIE_VC0_RC0_VC_ID_S                 24
-+#define PCIE_VC0_RC0_VC_EN                   0x80000000  /* VC Enable */
-+
-+/* VC0 Resource Status Register */
-+#define PCIE_VC0_RSR0(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
-+#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS    0x00010000  /* Port Arbitration Table Status,not used */
-+#define PCIE_VC0_RSR0_VC_NEG_PENDING         0x00020000  /* VC Negotiation Pending */
-+
-+/* Ack Latency Timer and Replay Timer Register */
-+#define PCIE_ALTRT(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT   0x0000FFFF  /* Round Trip Latency Time Limit */
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT          0xFFFF0000  /* Replay Time Limit */
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S        16
-+
-+/* Other Message Register */
-+#define PCIE_OMR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
-+
-+/* Port Force Link Register */
-+#define PCIE_PFLR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
-+#define PCIE_PFLR_LINK_NUM                   0x000000FF  /* Link Number */
-+#define PCIE_PFLR_LINK_NUM_S                 0
-+#define PCIE_PFLR_FORCE_LINK                 0x00008000  /* Force link */
-+#define PCIE_PFLR_LINK_STATE                 0x003F0000  /* Link State */
-+#define PCIE_PFLR_LINK_STATE_S               16
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT        0xFF000000  /* Low Power Entrance Count, only for EP */
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S      24
-+
-+/* Ack Frequency Register */
-+#define PCIE_AFR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
-+#define PCIE_AFR_AF                          0x000000FF  /* Ack Frequency */
-+#define PCIE_AFR_AF_S                        0
-+#define PCIE_AFR_FTS_NUM                     0x0000FF00  /* The number of Fast Training Sequence from L0S to L0 */
-+#define PCIE_AFR_FTS_NUM_S                   8
-+#define PCIE_AFR_COM_FTS_NUM                 0x00FF0000  /* N_FTS; when common clock is used*/
-+#define PCIE_AFR_COM_FTS_NUM_S               16
-+#define PCIE_AFR_L0S_ENTRY_LATENCY           0x07000000  /* L0s Entrance Latency */
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_S         24
-+#define PCIE_AFR_L1_ENTRY_LATENCY            0x38000000  /* L1 Entrance Latency */
-+#define PCIE_AFR_L1_ENTRY_LATENCY_S          27
-+#define PCIE_AFR_FTS_NUM_DEFAULT             32
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT   7
-+#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT    5
-+
-+/* Port Link Control Register */
-+#define PCIE_PLCR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
-+#define PCIE_PLCR_OTHER_MSG_REQ              0x00000001  /* Other Message Request */
-+#define PCIE_PLCR_SCRAMBLE_DISABLE           0x00000002  /* Scramble Disable */  
-+#define PCIE_PLCR_LOOPBACK_EN                0x00000004  /* Loopback Enable */
-+#define PCIE_PLCR_LTSSM_HOT_RST              0x00000008  /* Force LTSSM to the hot reset */
-+#define PCIE_PLCR_DLL_LINK_EN                0x00000020  /* Enable Link initialization */
-+#define PCIE_PLCR_FAST_LINK_SIM_EN           0x00000080  /* Sets all internal timers to fast mode for simulation purposes */
-+#define PCIE_PLCR_LINK_MODE                  0x003F0000  /* Link Mode Enable Mask */
-+#define PCIE_PLCR_LINK_MODE_S                16
-+#define PCIE_PLCR_CORRUPTED_CRC_EN           0x02000000  /* Enabled Corrupt CRC */
-+
-+/* Lane Skew Register */
-+#define PCIE_LSR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
-+#define PCIE_LSR_LANE_SKEW_NUM               0x00FFFFFF  /* Insert Lane Skew for Transmit, not applicable */
-+#define PCIE_LSR_LANE_SKEW_NUM_S             0
-+#define PCIE_LSR_FC_DISABLE                  0x01000000  /* Disable of Flow Control */
-+#define PCIE_LSR_ACKNAK_DISABLE              0x02000000  /* Disable of Ack/Nak */
-+#define PCIE_LSR_LANE_DESKEW_DISABLE         0x80000000  /* Disable of Lane-to-Lane Skew */
-+
-+/* Symbol Number Register */
-+#define PCIE_SNR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
-+#define PCIE_SNR_TS                          0x0000000F  /* Number of TS Symbol */
-+#define PCIE_SNR_TS_S                        0
-+#define PCIE_SNR_SKP                         0x00000700  /* Number of SKP Symbol */
-+#define PCIE_SNR_SKP_S                       8
-+#define PCIE_SNR_REPLAY_TIMER                0x0007C000  /* Timer Modifier for Replay Timer */
-+#define PCIE_SNR_REPLAY_TIMER_S              14
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER        0x00F80000  /* Timer Modifier for Ack/Nak Latency Timer */
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S      19
-+#define PCIE_SNR_FC_TIMER                    0x1F000000  /* Timer Modifier for Flow Control Watchdog Timer */
-+#define PCIE_SNR_FC_TIMER_S                  28
-+
-+/* Symbol Timer Register and Filter Mask Register 1 */
-+#define PCIE_STRFMR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
-+#define PCIE_STRFMR_SKP_INTERVAL            0x000007FF  /* SKP lnterval Value */
-+#define PCIE_STRFMR_SKP_INTERVAL_S          0
-+#define PCIE_STRFMR_FC_WDT_DISABLE          0x00008000  /* Disable of FC Watchdog Timer */
-+#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK    0x00010000  /* Mask Function Mismatch Filtering for Incoming Requests */
-+#define PCIE_STRFMR_POISONED_TLP_OK         0x00020000  /* Mask Poisoned TLP Filtering */
-+#define PCIE_STRFMR_BAR_MATCH_OK            0x00040000  /* Mask BAR Match Filtering */
-+#define PCIE_STRFMR_TYPE1_CFG_REQ_OK        0x00080000  /* Mask Type 1 Configuration Request Filtering */
-+#define PCIE_STRFMR_LOCKED_REQ_OK           0x00100000  /* Mask Locked Request Filtering */
-+#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK    0x00200000  /* Mask Tag Error Rules for Received Completions */
-+#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000  /* Mask Requester ID Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK         0x00800000  /* Mask Function Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_TC_MISMATCH_OK           0x01000000  /* Mask Traffic Class Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK         0x02000000  /* Mask Attribute Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK       0x04000000  /* Mask Length Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_TLP_ECRC_ERR_OK              0x08000000  /* Mask ECRC Error Filtering */
-+#define PCIE_STRFMR_CPL_TLP_ECRC_OK              0x10000000  /* Mask ECRC Error Filtering for Completions */
-+#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP           0x20000000  /* Send Message TLPs */
-+#define PCIE_STRFMR_RX_IO_TRANS_ENABLE           0x40000000  /* Mask Filtering of received I/O Requests */
-+#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE          0x80000000  /* Mask Filtering of Received Configuration Requests */
-+
-+#define PCIE_DEF_SKP_INTERVAL    700             /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
-+
-+/* Filter Masker Register 2 */
-+#define PCIE_FMR2(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
-+#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1    0x00000001  /* Mask RADM Filtering and Error Handling Rules */
-+#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1    0x00000002  /* Mask RADM Filtering and Error Handling Rules */
-+
-+/* Debug Register 0 */
-+#define PCIE_DBR0(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
-+
-+/* Debug Register 1 */
-+#define PCIE_DBR1(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
-+
-+/* Transmit Posted FC Credit Status Register */
-+#define PCIE_TPFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS           0x00000FFF /* Transmit Posted Data FC Credits */
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S         0
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS            0x000FF000 /* Transmit Posted Header FC Credits */
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S          12
-+
-+/* Transmit Non-Posted FC Credit Status */
-+#define PCIE_TNPFCS(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS         0x00000FFF /* Transmit Non-Posted Data FC Credits */
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S       0
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS          0x000FF000 /* Transmit Non-Posted Header FC Credits */
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S        12
-+
-+/* Transmit Complete FC Credit Status Register */
-+#define PCIE_TCFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS         0x00000FFF /* Transmit Completion Data FC Credits */
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S       0
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS          0x000FF000 /* Transmit Completion Header FC Credits */
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S        12
-+
-+/* Queue Status Register */
-+#define PCIE_QSR(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
-+#define PCIE_QSR_WAIT_UPDATE_FC_DLL               0x00000001 /* Received TLP FC Credits Not Returned */
-+#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY           0x00000002 /* Transmit Retry Buffer Not Empty */
-+#define PCIE_QSR_RX_QUEUE_NOT_EMPTY               0x00000004 /* Received Queue Not Empty */
-+
-+/* VC Transmit Arbitration Register 1 */
-+#define PCIE_VCTAR1(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC0               0x000000FF /* WRR Weight for VC0 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC1               0x0000FF00 /* WRR Weight for VC1 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC2               0x00FF0000 /* WRR Weight for VC2 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC3               0xFF000000 /* WRR Weight for VC3 */
-+
-+/* VC Transmit Arbitration Register 2 */
-+#define PCIE_VCTAR2(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC4               0x000000FF /* WRR Weight for VC4 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC5               0x0000FF00 /* WRR Weight for VC5 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC6               0x00FF0000 /* WRR Weight for VC6 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC7               0xFF000000 /* WRR Weight for VC7 */
-+
-+/* VC0 Posted Receive Queue Control Register */
-+#define PCIE_VC0_PRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS            0x00000FFF /* VC0 Posted Data Credits */
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S          0
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS             0x000FF000 /* VC0 Posted Header Credits */
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S           12
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE          0x00E00000 /* VC0 Posted TLP Queue Mode */
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S        20
-+#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER           0x40000000 /* TLP Type Ordering for VC0 */    
-+#define PCIE_VC0_PRQCR_VC_STRICT_ORDER           0x80000000 /* VC0 Ordering for Receive Queues */
-+
-+/* VC0 Non-Posted Receive Queue Control */
-+#define PCIE_VC0_NPRQCR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS          0x00000FFF /* VC0 Non-Posted Data Credits */
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S        0
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS           0x000FF000 /* VC0 Non-Posted Header Credits */
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S         12
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE        0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S      20
-+
-+/* VC0 Completion Receive Queue Control */
-+#define PCIE_VC0_CRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS          0x00000FFF /* VC0 Completion TLP Queue Mode */
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S        0
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS           0x000FF000 /* VC0 Completion Header Credits */
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S         12
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE        0x00E00000 /* VC0 Completion Data Credits */
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S      21
-+
-+/* Applicable to the above three registers */
-+enum {
-+    PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
-+    PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH   = 2,
-+    PCIE_VC0_TLP_QUEUE_MODE_BYPASS        = 4,
-+};
-+
-+/* VC0 Posted Buffer Depth Register */
-+#define PCIE_VC0_PBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES       0x00003FFF /* VC0 Posted Data Queue Depth */
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S     0
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES        0x03FF0000 /* VC0 Posted Header Queue Depth */
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S      16
-+
-+/* VC0 Non-Posted Buffer Depth Register */
-+#define PCIE_VC0_NPBD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES     0x00003FFF /* VC0 Non-Posted Data Queue Depth */
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S   0
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S    16
-+
-+/* VC0 Completion Buffer Depth Register */
-+#define PCIE_VC0_CBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES     0x00003FFF /* C0 Completion Data Queue Depth */
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S   0
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Completion Header Queue Depth */
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S    16
-+
-+/* PHY Status Register, all zeros in VR9 */
-+#define PCIE_PHYSR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
-+
-+/* PHY Control Register, all zeros in VR9 */
-+#define PCIE_PHYCR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
-+
-+/* 
-+ * PCIe PDI PHY register definition, suppose all the following 
-+ * stuff is confidential. 
-+ * XXX, detailed bit definition
-+ */
-+#define	PCIE_PHY_PLL_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
-+#define	PCIE_PHY_PLL_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
-+#define	PCIE_PHY_PLL_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
-+#define	PCIE_PHY_PLL_CTRL4(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
-+#define	PCIE_PHY_PLL_CTRL5(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
-+#define	PCIE_PHY_PLL_CTRL6(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
-+#define	PCIE_PHY_PLL_CTRL7(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
-+#define	PCIE_PHY_PLL_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
-+#define	PCIE_PHY_PLL_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
-+#define	PCIE_PHY_PLL_A_CTRL3(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
-+#define	PCIE_PHY_PLL_STATUS(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
-+ 
-+#define PCIE_PHY_TX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
-+#define PCIE_PHY_TX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
-+#define PCIE_PHY_TX1_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
-+#define PCIE_PHY_TX1_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
-+#define PCIE_PHY_TX1_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
-+#define PCIE_PHY_TX1_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
-+#define PCIE_PHY_TX1_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
-+#define PCIE_PHY_TX1_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
-+
-+#define PCIE_PHY_TX2_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
-+#define PCIE_PHY_TX2_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
-+#define PCIE_PHY_TX2_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
-+#define PCIE_PHY_TX2_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
-+#define PCIE_PHY_TX2_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
-+#define PCIE_PHY_TX2_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
-+#define PCIE_PHY_TX2_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
-+
-+#define PCIE_PHY_RX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
-+#define PCIE_PHY_RX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
-+#define PCIE_PHY_RX1_CDR(X)         (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
-+#define PCIE_PHY_RX1_EI(X)          (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
-+#define PCIE_PHY_RX1_A_CTRL(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
-+
-+/* Interrupt related stuff */
-+#define PCIE_LEGACY_DISABLE 0
-+#define PCIE_LEGACY_INTA  1
-+#define PCIE_LEGACY_INTB  2
-+#define PCIE_LEGACY_INTC  3
-+#define PCIE_LEGACY_INTD  4
-+#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
-+
-+#define PCIE_IRQ_LOCK(lock) do {             \
-+    unsigned long flags;                     \
-+    spin_lock_irqsave(&(lock), flags);
-+#define PCIE_IRQ_UNLOCK(lock)                \
-+    spin_unlock_irqrestore(&(lock), flags);  \
-+} while (0)
-+
-+#define PCIE_MSG_MSI        0x00000001
-+#define PCIE_MSG_ISR        0x00000002
-+#define PCIE_MSG_FIXUP      0x00000004
-+#define PCIE_MSG_READ_CFG   0x00000008
-+#define PCIE_MSG_WRITE_CFG  0x00000010
-+#define PCIE_MSG_CFG        (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
-+#define PCIE_MSG_REG        0x00000020
-+#define PCIE_MSG_INIT       0x00000040
-+#define PCIE_MSG_ERR        0x00000080
-+#define PCIE_MSG_PHY        0x00000100
-+#define PCIE_MSG_ANY        0x000001ff
-+
-+#define IFX_PCIE_PORT0      0
-+#define IFX_PCIE_PORT1      1
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+#define IFX_PCIE_CORE_NR    2
-+#else
-+#define IFX_PCIE_CORE_NR    1
-+#endif
-+
-+//#define IFX_PCIE_ERROR_INT
-+
-+//#define IFX_PCIE_DBG
-+
-+#if defined(IFX_PCIE_DBG)
-+#define IFX_PCIE_PRINT(_m, _fmt, args...) do {   \
-+    if (g_pcie_debug_flag & (_m)) {              \
-+        ifx_pcie_debug((_fmt), ##args);          \
-+    }                                            \
-+} while (0)
-+
-+#define INLINE 
-+#else
-+#define IFX_PCIE_PRINT(_m, _fmt, args...)   \
-+    do {} while(0)
-+#define INLINE inline
-+#endif
-+
-+struct ifx_pci_controller {
-+	struct pci_controller   pcic;
-+    
-+	/* RC specific, per host bus information */
-+	u32   port;  /* Port index, 0 -- 1st core, 1 -- 2nd core */
-+};
-+
-+typedef struct ifx_pcie_ir_irq {
-+    const unsigned int irq;
-+    const char name[16];
-+}ifx_pcie_ir_irq_t;
-+
-+typedef struct ifx_pcie_legacy_irq{
-+    const u32 irq_bit;
-+    const int irq;
-+}ifx_pcie_legacy_irq_t;
-+
-+typedef struct ifx_pcie_irq {
-+    ifx_pcie_ir_irq_t ir_irq;
-+    ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
-+}ifx_pcie_irq_t;
-+
-+extern u32 g_pcie_debug_flag;
-+extern void ifx_pcie_debug(const char *fmt, ...);
-+extern void pcie_phy_clock_mode_setup(int pcie_port);
-+extern void pcie_msi_pic_init(int pcie_port);
-+extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
-+extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
-+
-+
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+#include <linux/clk.h>
-+
-+#include <lantiq_soc.h>
-+
-+#define IFX_PCIE_GPIO_RESET  38
-+#define IFX_REG_R32	ltq_r32
-+#define IFX_REG_W32	ltq_w32
-+#define CONFIG_IFX_PCIE_HW_SWAP
-+#define IFX_RCU_AHB_ENDIAN                      ((volatile u32*)(IFX_RCU + 0x004C))
-+#define IFX_RCU_RST_REQ                         ((volatile u32*)(IFX_RCU + 0x0010))
-+#define IFX_RCU_AHB_BE_PCIE_PDI                  0x00000080  /* Configure PCIE PDI module in big endian*/
-+
-+#define IFX_RCU                                 (KSEG1 | 0x1F203000)
-+#define IFX_RCU_AHB_BE_PCIE_M                    0x00000001  /* Configure AHB master port that connects to PCIe RC in big endian */
-+#define IFX_RCU_AHB_BE_PCIE_S                    0x00000010  /* Configure AHB slave port that connects to PCIe RC in little endian */
-+#define IFX_RCU_AHB_BE_XBAR_M                    0x00000002  /* Configure AHB master port that connects to XBAR in big endian */
-+#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+
-+#define IFX_PMU1_MODULE_PCIE_PHY   (0)
-+#define IFX_PMU1_MODULE_PCIE_CTRL  (1)
-+#define IFX_PMU1_MODULE_PDI        (4)
-+#define IFX_PMU1_MODULE_MSI        (5)
-+
-+#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
-+
-+
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+}
-+
-+static inline void pcie_ahb_pmu_setup(void)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("ltq_pcie", "ahb");
-+	clk_enable(clk);
-+	//ltq_pmu_enable(PMU_AHBM | PMU_AHBS);
-+}
-+
-+static inline void pcie_rcu_endian_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+    reg |= IFX_RCU_AHB_BE_PCIE_M;
-+    reg |= IFX_RCU_AHB_BE_PCIE_S;
-+    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#else 
-+    reg |= IFX_RCU_AHB_BE_PCIE_M;
-+    reg &= ~IFX_RCU_AHB_BE_PCIE_S;
-+    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-+}
-+
-+static inline void pcie_phy_pmu_enable(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("ltq_pcie", "phy");
-+	clk_enable(clk);
-+	//ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PCIE_PHY);
-+}
-+
-+static inline void pcie_phy_pmu_disable(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("ltq_pcie", "phy");
-+	clk_disable(clk);
-+	//ltq_pmu1_disable(1<<IFX_PMU1_MODULE_PCIE_PHY);
-+}
-+
-+static inline void pcie_pdi_big_endian(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* SRAM2PDI endianness control. */
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+    /* Config AHB->PCIe and PDI endianness */
-+    reg |= IFX_RCU_AHB_BE_PCIE_PDI;
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+}
-+
-+static inline void pcie_pdi_pmu_enable(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("ltq_pcie", "pdi");
-+	clk_enable(clk);
-+	//ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PDI);
-+}
-+
-+static inline void pcie_core_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+
-+    /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly  */
-+    reg |= 0x00400000;
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_core_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    /* Reset PCIe PHY & Core, bit 22 */
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg &= ~0x00400000;
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg |= 0x00001000; /* Bit 12 */
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg &= ~0x00001000; /* Bit 12 */
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+	gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
-+  //  ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+    mdelay(100);
-+	gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-+//    ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_core_pmu_setup(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("ltq_pcie", "ctl");
-+	clk_enable(clk);
-+	clk = clk_get_sys("ltq_pcie", "bus");
-+	clk_enable(clk);
-+
-+	//ltq_pmu1_enable(1 << IFX_PMU1_MODULE_PCIE_CTRL);
-+	//ltq_pmu_enable(1 << IFX_PMU_MODULE_PCIE_L0_CLK);
-+}
-+
-+static inline void pcie_msi_init(int pcie_port)
-+{
-+	struct clk *clk;
-+    pcie_msi_pic_init(pcie_port);
-+	clk = clk_get_sys("ltq_pcie", "msi");
-+	clk_enable(clk);
-+	//ltq_pmu1_enable(1 << IFX_PMU1_MODULE_MSI);
-+}
-+
-+static inline u32
-+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-+{
-+    u32 tbus_number = bus_number;
-+
-+#ifdef CONFIG_PCI_LANTIQ
-+    if (pcibios_host_nr() > 1) {
-+        tbus_number -= pcibios_1st_host_bus_nr();
-+    }
-+#endif /* CONFIG_PCI_LANTIQ */
-+    return tbus_number;
-+}
-+
-+static inline u32
-+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-+{
-+    struct pci_dev *pdev;
-+    u32 tvalue = value;
-+
-+    /* Sanity check */
-+    pdev = pci_get_slot(bus, devfn);
-+    if (pdev == NULL) {
-+        return tvalue;
-+    }
-+
-+    /* Only care about PCI bridge */
-+    if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-+        return tvalue;
-+    }
-+
-+    if (read) { /* Read hack */
-+    #ifdef CONFIG_PCI_LANTIQ
-+        if (pcibios_host_nr() > 1) {
-+            tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
-+        }
-+    #endif /* CONFIG_PCI_LANTIQ */
-+    }
-+    else { /* Write hack */
-+    #ifdef CONFIG_PCI_LANTIQ
-+        if (pcibios_host_nr() > 1) {
-+            tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
-+        }
-+    #endif
-+    }
-+    return tvalue;
-+}
-+
-+#endif /* IFXMIPS_PCIE_VR9_H */
-+
---- a/drivers/pci/pcie/Kconfig
-+++ b/drivers/pci/pcie/Kconfig
-@@ -51,6 +51,7 @@ config PCIEAER_INJECT
- config PCIE_ECRC
- 	bool "PCI Express ECRC settings control"
- 	depends on PCIEAER
-+	default n
- 	help
- 	  Used to override firmware/bios settings for PCI Express ECRC
- 	  (transaction layer end-to-end CRC checking).
---- a/include/linux/pci.h
-+++ b/include/linux/pci.h
-@@ -1421,6 +1421,8 @@ void pci_walk_bus(struct pci_bus *top, i
- 		  void *userdata);
- int pci_cfg_space_size(struct pci_dev *dev);
- unsigned char pci_bus_max_busnr(struct pci_bus *bus);
-+int pcibios_host_nr(void);
-+int pcibios_1st_host_bus_nr(void);
- void pci_setup_bridge(struct pci_bus *bus);
- resource_size_t pcibios_window_alignment(struct pci_bus *bus,
- 					 unsigned long type);
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1079,6 +1079,12 @@
- #define PCI_DEVICE_ID_SGI_IOC3		0x0003
- #define PCI_DEVICE_ID_SGI_LITHIUM	0x1002
- 
-+#define PCI_VENDOR_ID_INFINEON		0x15D1
-+#define PCI_DEVICE_ID_INFINEON_DANUBE	0x000F
-+#define PCI_DEVICE_ID_INFINEON_PCIE	0x0011
-+#define PCI_VENDOR_ID_LANTIQ		0x1BEF
-+#define PCI_DEVICE_ID_LANTIQ_PCIE	0x0011
-+
- #define PCI_VENDOR_ID_WINBOND		0x10ad
- #define PCI_DEVICE_ID_WINBOND_82C105	0x0105
- #define PCI_DEVICE_ID_WINBOND_83C553	0x0565
diff --git a/target/linux/lantiq/patches-5.10/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-5.10/0004-MIPS-lantiq-add-atm-hack.patch
deleted file mode 100644
index e215df60ee71..000000000000
--- a/target/linux/lantiq/patches-5.10/0004-MIPS-lantiq-add-atm-hack.patch
+++ /dev/null
@@ -1,482 +0,0 @@
-From 9afadf01b1be371ee88491819aa67364684461f9 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 3 Aug 2012 10:27:25 +0200
-Subject: [PATCH 04/36] MIPS: lantiq: add atm hack
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-lantiq/lantiq_atm.h |  196 +++++++++++++++++++++++
- arch/mips/include/asm/mach-lantiq/lantiq_ptm.h |  203 ++++++++++++++++++++++++
- arch/mips/lantiq/irq.c                         |    2 +
- arch/mips/mm/cache.c                           |    4 +
- include/uapi/linux/atm.h                       |    6 +
- net/atm/common.c                               |    6 +
- net/atm/proc.c                                 |    2 +-
- 7 files changed, 416 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_atm.h
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h
-@@ -0,0 +1,196 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifx_atm.h
-+** PROJECT      : UEIP
-+** MODULES      : ATM
-+**
-+** DATE         : 17 Jun 2009
-+** AUTHOR       : Xu Liang
-+** DESCRIPTION  : Global ATM driver header file
-+** COPYRIGHT    :       Copyright (c) 2006
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+**
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 07 JUL 2009  Xu Liang        Init Version
-+*******************************************************************************/
-+
-+#ifndef IFX_ATM_H
-+#define IFX_ATM_H
-+
-+
-+
-+/*!
-+  \defgroup IFX_ATM UEIP Project - ATM driver module
-+  \brief UEIP Project - ATM driver module, support Danube, Amazon-SE, AR9, VR9.
-+ */
-+
-+/*!
-+  \defgroup IFX_ATM_IOCTL IOCTL Commands
-+  \ingroup IFX_ATM
-+  \brief IOCTL Commands used by user application.
-+ */
-+
-+/*!
-+  \defgroup IFX_ATM_STRUCT Structures
-+  \ingroup IFX_ATM
-+  \brief Structures used by user application.
-+ */
-+
-+/*!
-+  \file ifx_atm.h
-+  \ingroup IFX_ATM
-+  \brief ATM driver header file
-+ */
-+
-+
-+
-+/*
-+ * ####################################
-+ *              Definition
-+ * ####################################
-+ */
-+
-+/*!
-+  \addtogroup IFX_ATM_STRUCT
-+ */
-+/*@{*/
-+
-+/*
-+ *  ATM MIB
-+ */
-+
-+/*!
-+  \struct atm_cell_ifEntry_t
-+  \brief Structure used for Cell Level MIB Counters.
-+
-+  User application use this structure to call IOCTL command "PPE_ATM_MIB_CELL".
-+ */
-+typedef struct {
-+	__u32	ifHCInOctets_h;     /*!< byte counter of ingress cells (upper 32 bits, total 64 bits)   */
-+	__u32	ifHCInOctets_l;     /*!< byte counter of ingress cells (lower 32 bits, total 64 bits)   */
-+	__u32	ifHCOutOctets_h;    /*!< byte counter of egress cells (upper 32 bits, total 64 bits)    */
-+	__u32	ifHCOutOctets_l;    /*!< byte counter of egress cells (lower 32 bits, total 64 bits)    */
-+	__u32	ifInErrors;         /*!< counter of error ingress cells     */
-+	__u32	ifInUnknownProtos;  /*!< counter of unknown ingress cells   */
-+	__u32	ifOutErrors;        /*!< counter of error egress cells      */
-+} atm_cell_ifEntry_t;
-+
-+/*!
-+  \struct atm_aal5_ifEntry_t
-+  \brief Structure used for AAL5 Frame Level MIB Counters.
-+
-+  User application use this structure to call IOCTL command "PPE_ATM_MIB_AAL5".
-+ */
-+typedef struct {
-+	__u32	ifHCInOctets_h;     /*!< byte counter of ingress packets (upper 32 bits, total 64 bits) */
-+	__u32	ifHCInOctets_l;     /*!< byte counter of ingress packets (lower 32 bits, total 64 bits) */
-+	__u32	ifHCOutOctets_h;    /*!< byte counter of egress packets (upper 32 bits, total 64 bits)  */
-+	__u32	ifHCOutOctets_l;    /*!< byte counter of egress packets (lower 32 bits, total 64 bits)  */
-+	__u32	ifInUcastPkts;      /*!< counter of ingress packets         */
-+	__u32	ifOutUcastPkts;     /*!< counter of egress packets          */
-+	__u32	ifInErrors;         /*!< counter of error ingress packets   */
-+	__u32	ifInDiscards;       /*!< counter of dropped ingress packets */
-+	__u32	ifOutErros;         /*!< counter of error egress packets    */
-+	__u32	ifOutDiscards;      /*!< counter of dropped egress packets  */
-+} atm_aal5_ifEntry_t;
-+
-+/*!
-+  \struct atm_aal5_vcc_t
-+  \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
-+
-+  This structure is a part of structure "atm_aal5_vcc_x_t".
-+ */
-+typedef struct {
-+	__u32	aal5VccCrcErrors;       /*!< counter of ingress packets with CRC error  */
-+	__u32	aal5VccSarTimeOuts;     /*!< counter of ingress packets with Re-assemble timeout    */  //no timer support yet
-+	__u32	aal5VccOverSizedSDUs;   /*!< counter of oversized ingress packets       */
-+} atm_aal5_vcc_t;
-+
-+/*!
-+  \struct atm_aal5_vcc_x_t
-+  \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
-+
-+  User application use this structure to call IOCTL command "PPE_ATM_MIB_VCC".
-+ */
-+typedef struct {
-+	int             vpi;        /*!< VPI of the VCC to get MIB counters */
-+	int             vci;        /*!< VCI of the VCC to get MIB counters */
-+	atm_aal5_vcc_t  mib_vcc;    /*!< structure to get MIB counters      */
-+} atm_aal5_vcc_x_t;
-+
-+/*@}*/
-+
-+
-+
-+/*
-+ * ####################################
-+ *                IOCTL
-+ * ####################################
-+ */
-+
-+/*!
-+  \addtogroup IFX_ATM_IOCTL
-+ */
-+/*@{*/
-+
-+/*
-+ *  ioctl Command
-+ */
-+/*!
-+  \brief ATM IOCTL Magic Number
-+ */
-+#define PPE_ATM_IOC_MAGIC       'o'
-+/*!
-+  \brief ATM IOCTL Command - Get Cell Level MIB Counters
-+
-+   This command is obsolete. User can get cell level MIB from DSL API.
-+   This command uses structure "atm_cell_ifEntry_t" as parameter for output of MIB counters.
-+ */
-+#define PPE_ATM_MIB_CELL        _IOW(PPE_ATM_IOC_MAGIC,  0, atm_cell_ifEntry_t)
-+/*!
-+  \brief ATM IOCTL Command - Get AAL5 Level MIB Counters
-+
-+   Get AAL5 packet counters.
-+   This command uses structure "atm_aal5_ifEntry_t" as parameter for output of MIB counters.
-+ */
-+#define PPE_ATM_MIB_AAL5        _IOW(PPE_ATM_IOC_MAGIC,  1, atm_aal5_ifEntry_t)
-+/*!
-+  \brief ATM IOCTL Command - Get Per PVC MIB Counters
-+
-+   Get AAL5 packet counters for each PVC.
-+   This command uses structure "atm_aal5_vcc_x_t" as parameter for input of VPI/VCI information and output of MIB counters.
-+ */
-+#define PPE_ATM_MIB_VCC         _IOWR(PPE_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t)
-+/*!
-+  \brief Total Number of ATM IOCTL Commands
-+ */
-+#define PPE_ATM_IOC_MAXNR       3
-+
-+/*@}*/
-+
-+
-+
-+/*
-+ * ####################################
-+ *                 API
-+ * ####################################
-+ */
-+
-+#ifdef __KERNEL__
-+struct port_cell_info {
-+    unsigned int    port_num;
-+    unsigned int    tx_link_rate[2];
-+};
-+#endif
-+
-+
-+
-+#endif  //  IFX_ATM_H
-+
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
-@@ -0,0 +1,203 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifx_ptm.h
-+** PROJECT      : UEIP
-+** MODULES      : PTM
-+**
-+** DATE         : 17 Jun 2009
-+** AUTHOR       : Xu Liang
-+** DESCRIPTION  : Global PTM driver header file
-+** COPYRIGHT    :       Copyright (c) 2006
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+**
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 07 JUL 2009  Xu Liang        Init Version
-+*******************************************************************************/
-+
-+#ifndef IFX_PTM_H
-+#define IFX_PTM_H
-+
-+
-+
-+/*!
-+  \defgroup IFX_PTM UEIP Project - PTM driver module
-+  \brief UEIP Project - PTM driver module, support Danube, Amazon-SE, AR9, VR9.
-+ */
-+
-+/*!
-+  \defgroup IFX_PTM_IOCTL IOCTL Commands
-+  \ingroup IFX_PTM
-+  \brief IOCTL Commands used by user application.
-+ */
-+
-+/*!
-+  \defgroup IFX_PTM_STRUCT Structures
-+  \ingroup IFX_PTM
-+  \brief Structures used by user application.
-+ */
-+
-+/*!
-+  \file ifx_ptm.h
-+  \ingroup IFX_PTM
-+  \brief PTM driver header file
-+ */
-+
-+
-+
-+/*
-+ * ####################################
-+ *              Definition
-+ * ####################################
-+ */
-+
-+
-+
-+/*
-+ * ####################################
-+ *                IOCTL
-+ * ####################################
-+ */
-+
-+/*!
-+  \addtogroup IFX_PTM_IOCTL
-+ */
-+/*@{*/
-+
-+/*
-+ *  ioctl Command
-+ */
-+/*!
-+  \brief PTM IOCTL Command - Get codeword MIB counters.
-+
-+  This command uses structure "PTM_CW_IF_ENTRY_T" to get codeword level MIB counters.
-+ */
-+#define IFX_PTM_MIB_CW_GET              SIOCDEVPRIVATE + 1
-+/*!
-+  \brief PTM IOCTL Command - Get packet MIB counters.
-+
-+  This command uses structure "PTM_FRAME_MIB_T" to get packet level MIB counters.
-+ */
-+#define IFX_PTM_MIB_FRAME_GET           SIOCDEVPRIVATE + 2
-+/*!
-+  \brief PTM IOCTL Command - Get firmware configuration (CRC).
-+
-+  This command uses structure "IFX_PTM_CFG_T" to get firmware configuration (CRC).
-+ */
-+#define IFX_PTM_CFG_GET                 SIOCDEVPRIVATE + 3
-+/*!
-+  \brief PTM IOCTL Command - Set firmware configuration (CRC).
-+
-+  This command uses structure "IFX_PTM_CFG_T" to set firmware configuration (CRC).
-+ */
-+#define IFX_PTM_CFG_SET                 SIOCDEVPRIVATE + 4
-+/*!
-+  \brief PTM IOCTL Command - Program priority value to TX queue mapping.
-+
-+  This command uses structure "IFX_PTM_PRIO_Q_MAP_T" to program priority value to TX queue mapping.
-+ */
-+#define IFX_PTM_MAP_PKT_PRIO_TO_Q       SIOCDEVPRIVATE + 14
-+
-+/*@}*/
-+
-+
-+/*!
-+  \addtogroup IFX_PTM_STRUCT
-+ */
-+/*@{*/
-+
-+/*
-+ *  ioctl Data Type
-+ */
-+
-+/*!
-+  \typedef PTM_CW_IF_ENTRY_T
-+  \brief Wrapping of structure "ptm_cw_ifEntry_t".
-+ */
-+/*!
-+  \struct ptm_cw_ifEntry_t
-+  \brief Structure used for CodeWord level MIB counters.
-+ */
-+typedef struct ptm_cw_ifEntry_t {
-+    uint32_t    ifRxNoIdleCodewords;    /*!< output, number of ingress user codeword */
-+    uint32_t    ifRxIdleCodewords;      /*!< output, number of ingress idle codeword */
-+    uint32_t    ifRxCodingViolation;    /*!< output, number of error ingress codeword */
-+    uint32_t    ifTxNoIdleCodewords;    /*!< output, number of egress user codeword */
-+    uint32_t    ifTxIdleCodewords;      /*!< output, number of egress idle codeword */
-+} PTM_CW_IF_ENTRY_T;
-+
-+/*!
-+  \typedef PTM_FRAME_MIB_T
-+  \brief Wrapping of structure "ptm_frame_mib_t".
-+ */
-+/*!
-+  \struct ptm_frame_mib_t
-+  \brief Structure used for packet level MIB counters.
-+ */
-+typedef struct ptm_frame_mib_t {
-+    uint32_t    RxCorrect;      /*!< output, number of ingress packet */
-+    uint32_t    TC_CrcError;    /*!< output, number of egress packet with CRC error */
-+    uint32_t    RxDropped;      /*!< output, number of dropped ingress packet */
-+    uint32_t    TxSend;         /*!< output, number of egress packet */
-+} PTM_FRAME_MIB_T;
-+
-+/*!
-+  \typedef IFX_PTM_CFG_T
-+  \brief Wrapping of structure "ptm_cfg_t".
-+ */
-+/*!
-+  \struct ptm_cfg_t
-+  \brief Structure used for ETH/TC CRC configuration.
-+ */
-+typedef struct ptm_cfg_t {
-+    uint32_t    RxEthCrcPresent;    /*!< input/output, ingress packet has ETH CRC */
-+    uint32_t    RxEthCrcCheck;      /*!< input/output, check ETH CRC of ingress packet */
-+    uint32_t    RxTcCrcCheck;       /*!< input/output, check TC CRC of ingress codeword */
-+    uint32_t    RxTcCrcLen;         /*!< input/output, length of TC CRC of ingress codeword */
-+    uint32_t    TxEthCrcGen;        /*!< input/output, generate ETH CRC for egress packet */
-+    uint32_t    TxTcCrcGen;         /*!< input/output, generate TC CRC for egress codeword */
-+    uint32_t    TxTcCrcLen;         /*!< input/output, length of TC CRC of egress codeword */
-+} IFX_PTM_CFG_T;
-+
-+/*!
-+  \typedef IFX_PTM_PRIO_Q_MAP_T
-+  \brief Wrapping of structure "ppe_prio_q_map".
-+ */
-+/*!
-+  \struct ppe_prio_q_map
-+  \brief Structure used for Priority Value to TX Queue mapping.
-+ */
-+typedef struct ppe_prio_q_map {
-+    int             pkt_prio;
-+    int             qid;
-+    int             vpi;    //  ignored in eth interface
-+    int             vci;    //  ignored in eth interface
-+} IFX_PTM_PRIO_Q_MAP_T;
-+
-+/*@}*/
-+
-+
-+
-+/*
-+ * ####################################
-+ *                 API
-+ * ####################################
-+ */
-+
-+#ifdef __KERNEL__
-+struct port_cell_info {
-+    unsigned int    port_num;
-+    unsigned int    tx_link_rate[2];
-+};
-+#endif
-+
-+
-+
-+#endif  //  IFX_PTM_H
-+
---- a/arch/mips/lantiq/irq.c
-+++ b/arch/mips/lantiq/irq.c
-@@ -12,6 +12,7 @@
- #include <linux/of_platform.h>
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
-+#include <linux/module.h>
- 
- #include <asm/bootinfo.h>
- #include <asm/irq_cpu.h>
-@@ -91,6 +92,7 @@ void ltq_disable_irq(struct irq_data *d)
- 	}
- 	raw_spin_unlock_irqrestore(&ltq_icu_lock, flags);
- }
-+EXPORT_SYMBOL(ltq_mask_and_ack_irq);
- 
- void ltq_mask_and_ack_irq(struct irq_data *d)
- {
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -61,6 +61,10 @@ void (*_dma_cache_wback_inv)(unsigned lo
- void (*_dma_cache_wback)(unsigned long start, unsigned long size);
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
-+EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_wback);
-+EXPORT_SYMBOL(_dma_cache_inv);
-+
- #endif /* CONFIG_DMA_NONCOHERENT */
- 
- /*
---- a/include/uapi/linux/atm.h
-+++ b/include/uapi/linux/atm.h
-@@ -131,8 +131,14 @@
- #define ATM_ABR		4
- #define ATM_ANYCLASS	5		/* compatible with everything */
- 
-+#define ATM_VBR_NRT     ATM_VBR
-+#define ATM_VBR_RT      6
-+#define ATM_UBR_PLUS    7
-+#define ATM_GFR         8
-+
- #define ATM_MAX_PCR	-1		/* maximum available PCR */
- 
-+
- struct atm_trafprm {
- 	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
- 	int		max_pcr;	/* maximum PCR in cells per second */
---- a/net/atm/proc.c
-+++ b/net/atm/proc.c
-@@ -141,7 +141,7 @@ static void *vcc_seq_next(struct seq_fil
- static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
- {
- 	static const char *const class_name[] = {
--		"off", "UBR", "CBR", "VBR", "ABR"};
-+		"off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"};
- 	static const char *const aal_name[] = {
- 		"---",	"1",	"2",	"3/4",	/*  0- 3 */
- 		"???",	"5",	"???",	"???",	/*  4- 7 */
diff --git a/target/linux/lantiq/patches-5.10/0008-MIPS-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-5.10/0008-MIPS-lantiq-backport-old-timer-code.patch
deleted file mode 100644
index 1d869afd9ad6..000000000000
--- a/target/linux/lantiq/patches-5.10/0008-MIPS-lantiq-backport-old-timer-code.patch
+++ /dev/null
@@ -1,1035 +0,0 @@
-From 94800350cb8d2f29dda2206b5e9a3772024ee168 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:30:56 +0200
-Subject: [PATCH 08/36] MIPS: lantiq: backport old timer code
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-lantiq/lantiq_timer.h |  155 ++++
- arch/mips/lantiq/xway/Makefile                   |    2 +-
- arch/mips/lantiq/xway/timer.c                    |  845 ++++++++++++++++++++++
- 3 files changed, 1001 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h
- create mode 100644 arch/mips/lantiq/xway/timer.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
-@@ -0,0 +1,155 @@
-+#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-+#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-+
-+
-+/******************************************************************************
-+       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
-+
-+                               No Warranty
-+   Because the program is licensed free of charge, there is no warranty for
-+   the program, to the extent permitted by applicable law.  Except when
-+   otherwise stated in writing the copyright holders and/or other parties
-+   provide the program "as is" without warranty of any kind, either
-+   expressed or implied, including, but not limited to, the implied
-+   warranties of merchantability and fitness for a particular purpose. The
-+   entire risk as to the quality and performance of the program is with
-+   you.  should the program prove defective, you assume the cost of all
-+   necessary servicing, repair or correction.
-+
-+   In no event unless required by applicable law or agreed to in writing
-+   will any copyright holder, or any other party who may modify and/or
-+   redistribute the program as permitted above, be liable to you for
-+   damages, including any general, special, incidental or consequential
-+   damages arising out of the use or inability to use the program
-+   (including but not limited to loss of data or data being rendered
-+   inaccurate or losses sustained by you or third parties or a failure of
-+   the program to operate with any other programs), even if such holder or
-+   other party has been advised of the possibility of such damages.
-+******************************************************************************/
-+
-+
-+/*
-+ * ####################################
-+ *              Definition
-+ * ####################################
-+ */
-+
-+/*
-+ *  Available Timer/Counter Index
-+ */
-+#define TIMER(n, X)                     (n * 2 + (X ? 1 : 0))
-+#define TIMER_ANY                       0x00
-+#define TIMER1A                         TIMER(1, 0)
-+#define TIMER1B                         TIMER(1, 1)
-+#define TIMER2A                         TIMER(2, 0)
-+#define TIMER2B                         TIMER(2, 1)
-+#define TIMER3A                         TIMER(3, 0)
-+#define TIMER3B                         TIMER(3, 1)
-+
-+/*
-+ *  Flag of Timer/Counter
-+ *  These flags specify the way in which timer is configured.
-+ */
-+/*  Bit size of timer/counter.                      */
-+#define TIMER_FLAG_16BIT                0x0000
-+#define TIMER_FLAG_32BIT                0x0001
-+/*  Switch between timer and counter.               */
-+#define TIMER_FLAG_TIMER                0x0000
-+#define TIMER_FLAG_COUNTER              0x0002
-+/*  Stop or continue when overflowing/underflowing. */
-+#define TIMER_FLAG_ONCE                 0x0000
-+#define TIMER_FLAG_CYCLIC               0x0004
-+/*  Count up or counter down.                       */
-+#define TIMER_FLAG_UP                   0x0000
-+#define TIMER_FLAG_DOWN                 0x0008
-+/*  Count on specific level or edge.                */
-+#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
-+#define TIMER_FLAG_LOW_LEVEL_SENSITIVE  0x0040
-+#define TIMER_FLAG_RISE_EDGE            0x0010
-+#define TIMER_FLAG_FALL_EDGE            0x0020
-+#define TIMER_FLAG_ANY_EDGE             0x0030
-+/*  Signal is syncronous to module clock or not.    */
-+#define TIMER_FLAG_UNSYNC               0x0000
-+#define TIMER_FLAG_SYNC                 0x0080
-+/*  Different interrupt handle type.                */
-+#define TIMER_FLAG_NO_HANDLE            0x0000
-+#if defined(__KERNEL__)
-+    #define TIMER_FLAG_CALLBACK_IN_IRQ  0x0100
-+#endif  //  defined(__KERNEL__)
-+#define TIMER_FLAG_SIGNAL               0x0300
-+/*  Internal clock source or external clock source  */
-+#define TIMER_FLAG_INT_SRC              0x0000
-+#define TIMER_FLAG_EXT_SRC              0x1000
-+
-+
-+/*
-+ *  ioctl Command
-+ */
-+#define GPTU_REQUEST_TIMER              0x01    /*  General method to setup timer/counter.  */
-+#define GPTU_FREE_TIMER                 0x02    /*  Free timer/counter.                     */
-+#define GPTU_START_TIMER                0x03    /*  Start or resume timer/counter.          */
-+#define GPTU_STOP_TIMER                 0x04    /*  Suspend timer/counter.                  */
-+#define GPTU_GET_COUNT_VALUE            0x05    /*  Get current count value.                */
-+#define GPTU_CALCULATE_DIVIDER          0x06    /*  Calculate timer divider from given freq.*/
-+#define GPTU_SET_TIMER                  0x07    /*  Simplified method to setup timer.       */
-+#define GPTU_SET_COUNTER                0x08    /*  Simplified method to setup counter.     */
-+
-+/*
-+ *  Data Type Used to Call ioctl
-+ */
-+struct gptu_ioctl_param {
-+    unsigned int                        timer;  /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
-+                                                 *  GPTU_SET_COUNTER, this field is ID of expected      *
-+                                                 *  timer/counter. If it's zero, a timer/counter would  *
-+                                                 *  be dynamically allocated and ID would be stored in  *
-+                                                 *  this field.                                         *
-+                                                 *  In command GPTU_GET_COUNT_VALUE, this field is      *
-+                                                 *  ignored.                                            *
-+                                                 *  In other command, this field is ID of timer/counter *
-+                                                 *  allocated.                                          */
-+    unsigned int                        flag;   /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
-+                                                 *  GPTU_SET_COUNTER, this field contains flags to      *
-+                                                 *  specify how to configure timer/counter.             *
-+                                                 *  In command GPTU_START_TIMER, zero indicate start    *
-+                                                 *  and non-zero indicate resume timer/counter.         *
-+                                                 *  In other command, this field is ignored.            */
-+    unsigned long                       value;  /*  In command GPTU_REQUEST_TIMER, this field contains  *
-+                                                 *  init/reload value.                                  *
-+                                                 *  In command GPTU_SET_TIMER, this field contains      *
-+                                                 *  frequency (0.001Hz) of timer.                       *
-+                                                 *  In command GPTU_GET_COUNT_VALUE, current count      *
-+                                                 *  value would be stored in this field.                *
-+                                                 *  In command GPTU_CALCULATE_DIVIDER, this field       *
-+                                                 *  contains frequency wanted, and after calculation,   *
-+                                                 *  divider would be stored in this field to overwrite  *
-+                                                 *  the frequency.                                      *
-+                                                 *  In other command, this field is ignored.            */
-+    int                                 pid;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
-+                                                 *  if signal is required, this field contains process  *
-+                                                 *  ID to which signal would be sent.                   *
-+                                                 *  In other command, this field is ignored.            */
-+    int                                 sig;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
-+                                                 *  if signal is required, this field contains signal   *
-+                                                 *  number which would be sent.                         *
-+                                                 *  In other command, this field is ignored.            */
-+};
-+
-+/*
-+ * ####################################
-+ *              Data Type
-+ * ####################################
-+ */
-+typedef void (*timer_callback)(unsigned long arg);
-+
-+extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
-+extern int lq_free_timer(unsigned int);
-+extern int lq_start_timer(unsigned int, int);
-+extern int lq_stop_timer(unsigned int);
-+extern int lq_reset_counter_flags(u32 timer, u32 flags);
-+extern int lq_get_count_value(unsigned int, unsigned long *);
-+extern u32 lq_cal_divider(unsigned long);
-+extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
-+extern int lq_set_counter(unsigned int timer, unsigned int flag,
-+	u32 reload, unsigned long arg1, unsigned long arg2);
-+
-+#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,4 +1,10 @@
- # SPDX-License-Identifier: GPL-2.0-only
--obj-y := prom.o sysctrl.o clk.o dma.o gptu.o dcdc.o
-+obj-y := prom.o sysctrl.o clk.o dma.o dcdc.o
-+
-+ifdef CONFIG_SOC_AMAZON_SE
-+obj-y += gptu.o
-+else
-+obj-y += timer.o
-+endif
- 
- obj-y += vmmc.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/timer.c
-@@ -0,0 +1,846 @@
-+#ifndef CONFIG_SOC_AMAZON_SE
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/fs.h>
-+#include <linux/miscdevice.h>
-+#include <linux/init.h>
-+#include <linux/uaccess.h>
-+#include <linux/unistd.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include <linux/sched/signal.h>
-+
-+#include <asm/irq.h>
-+#include <asm/div64.h>
-+#include "../clk.h"
-+
-+#include <lantiq_soc.h>
-+#include <lantiq_irq.h>
-+#include <lantiq_timer.h>
-+
-+#define MAX_NUM_OF_32BIT_TIMER_BLOCKS	6
-+
-+#ifdef TIMER1A
-+#define FIRST_TIMER			TIMER1A
-+#else
-+#define FIRST_TIMER			2
-+#endif
-+
-+/*
-+ *  GPTC divider is set or not.
-+ */
-+#define GPTU_CLC_RMC_IS_SET		0
-+
-+/*
-+ *  Timer Interrupt (IRQ)
-+ */
-+/*  Must be adjusted when ICU driver is available */
-+#define TIMER_INTERRUPT			(INT_NUM_IM3_IRL0 + 22)
-+
-+/*
-+ *  Bits Operation
-+ */
-+#define GET_BITS(x, msb, lsb)		\
-+	(((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
-+#define SET_BITS(x, msb, lsb, value)	\
-+	(((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \
-+	(((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
-+
-+/*
-+ *  GPTU Register Mapping
-+ */
-+#define LQ_GPTU			(KSEG1 + 0x1E100A00)
-+#define LQ_GPTU_CLC		((volatile u32 *)(LQ_GPTU + 0x0000))
-+#define LQ_GPTU_ID			((volatile u32 *)(LQ_GPTU + 0x0008))
-+#define LQ_GPTU_CON(n, X)		((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
-+#define LQ_GPTU_RUN(n, X)		((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
-+#define LQ_GPTU_RELOAD(n, X)	((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
-+#define LQ_GPTU_COUNT(n, X)	((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
-+#define LQ_GPTU_IRNEN		((volatile u32 *)(LQ_GPTU + 0x00F4))
-+#define LQ_GPTU_IRNICR		((volatile u32 *)(LQ_GPTU + 0x00F8))
-+#define LQ_GPTU_IRNCR		((volatile u32 *)(LQ_GPTU + 0x00FC))
-+
-+/*
-+ *  Clock Control Register
-+ */
-+#define GPTU_CLC_SMC			GET_BITS(*LQ_GPTU_CLC, 23, 16)
-+#define GPTU_CLC_RMC			GET_BITS(*LQ_GPTU_CLC, 15, 8)
-+#define GPTU_CLC_FSOE			(*LQ_GPTU_CLC & (1 << 5))
-+#define GPTU_CLC_EDIS			(*LQ_GPTU_CLC & (1 << 3))
-+#define GPTU_CLC_SPEN			(*LQ_GPTU_CLC & (1 << 2))
-+#define GPTU_CLC_DISS			(*LQ_GPTU_CLC & (1 << 1))
-+#define GPTU_CLC_DISR			(*LQ_GPTU_CLC & (1 << 0))
-+
-+#define GPTU_CLC_SMC_SET(value)		SET_BITS(0, 23, 16, (value))
-+#define GPTU_CLC_RMC_SET(value)		SET_BITS(0, 15, 8, (value))
-+#define GPTU_CLC_FSOE_SET(value)	((value) ? (1 << 5) : 0)
-+#define GPTU_CLC_SBWE_SET(value)	((value) ? (1 << 4) : 0)
-+#define GPTU_CLC_EDIS_SET(value)	((value) ? (1 << 3) : 0)
-+#define GPTU_CLC_SPEN_SET(value)	((value) ? (1 << 2) : 0)
-+#define GPTU_CLC_DISR_SET(value)	((value) ? (1 << 0) : 0)
-+
-+/*
-+ *  ID Register
-+ */
-+#define GPTU_ID_ID			GET_BITS(*LQ_GPTU_ID, 15, 8)
-+#define GPTU_ID_CFG			GET_BITS(*LQ_GPTU_ID, 7, 5)
-+#define GPTU_ID_REV			GET_BITS(*LQ_GPTU_ID, 4, 0)
-+
-+/*
-+ *  Control Register of Timer/Counter nX
-+ *    n is the index of block (1 based index)
-+ *    X is either A or B
-+ */
-+#define GPTU_CON_SRC_EG(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 10))
-+#define GPTU_CON_SRC_EXT(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 9))
-+#define GPTU_CON_SYNC(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 8))
-+#define GPTU_CON_EDGE(n, X)		GET_BITS(*LQ_GPTU_CON(n, X), 7, 6)
-+#define GPTU_CON_INV(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 5))
-+#define GPTU_CON_EXT(n, X)		(*LQ_GPTU_CON(n, A) & (1 << 4))	/* Timer/Counter B does not have this bit */
-+#define GPTU_CON_STP(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 3))
-+#define GPTU_CON_CNT(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 2))
-+#define GPTU_CON_DIR(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 1))
-+#define GPTU_CON_EN(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 0))
-+
-+#define GPTU_CON_SRC_EG_SET(value)	((value) ? 0 : (1 << 10))
-+#define GPTU_CON_SRC_EXT_SET(value)	((value) ? (1 << 9) : 0)
-+#define GPTU_CON_SYNC_SET(value)	((value) ? (1 << 8) : 0)
-+#define GPTU_CON_EDGE_SET(value)	SET_BITS(0, 7, 6, (value))
-+#define GPTU_CON_INV_SET(value)		((value) ? (1 << 5) : 0)
-+#define GPTU_CON_EXT_SET(value)		((value) ? (1 << 4) : 0)
-+#define GPTU_CON_STP_SET(value)		((value) ? (1 << 3) : 0)
-+#define GPTU_CON_CNT_SET(value)		((value) ? (1 << 2) : 0)
-+#define GPTU_CON_DIR_SET(value)		((value) ? (1 << 1) : 0)
-+
-+#define GPTU_RUN_RL_SET(value)		((value) ? (1 << 2) : 0)
-+#define GPTU_RUN_CEN_SET(value)		((value) ? (1 << 1) : 0)
-+#define GPTU_RUN_SEN_SET(value)		((value) ? (1 << 0) : 0)
-+
-+#define GPTU_IRNEN_TC_SET(n, X, value)	((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
-+#define GPTU_IRNCR_TC_SET(n, X, value)	((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
-+
-+#define TIMER_FLAG_MASK_SIZE(x)		(x & 0x0001)
-+#define TIMER_FLAG_MASK_TYPE(x)		(x & 0x0002)
-+#define TIMER_FLAG_MASK_STOP(x)		(x & 0x0004)
-+#define TIMER_FLAG_MASK_DIR(x)		(x & 0x0008)
-+#define TIMER_FLAG_NONE_EDGE		0x0000
-+#define TIMER_FLAG_MASK_EDGE(x)		(x & 0x0030)
-+#define TIMER_FLAG_REAL			0x0000
-+#define TIMER_FLAG_INVERT		0x0040
-+#define TIMER_FLAG_MASK_INVERT(x)	(x & 0x0040)
-+#define TIMER_FLAG_MASK_TRIGGER(x)	(x & 0x0070)
-+#define TIMER_FLAG_MASK_SYNC(x)		(x & 0x0080)
-+#define TIMER_FLAG_CALLBACK_IN_HB	0x0200
-+#define TIMER_FLAG_MASK_HANDLE(x)	(x & 0x0300)
-+#define TIMER_FLAG_MASK_SRC(x)		(x & 0x1000)
-+
-+struct timer_dev_timer {
-+	unsigned int f_irq_on;
-+	unsigned int irq;
-+	unsigned int flag;
-+	unsigned long arg1;
-+	unsigned long arg2;
-+};
-+
-+struct timer_dev {
-+	struct mutex gptu_mutex;
-+	unsigned int number_of_timers;
-+	unsigned int occupation;
-+	unsigned int f_gptu_on;
-+	struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2];
-+};
-+
-+
-+unsigned int ltq_get_fpi_bus_clock(int fpi) {
-+	struct clk *clk = clk_get_fpi();
-+	return clk_get_rate(clk);
-+}
-+
-+
-+static long gptu_ioctl(struct file *, unsigned int, unsigned long);
-+static int gptu_open(struct inode *, struct file *);
-+static int gptu_release(struct inode *, struct file *);
-+
-+static struct file_operations gptu_fops = {
-+	.owner = THIS_MODULE,
-+	.unlocked_ioctl = gptu_ioctl,
-+	.open = gptu_open,
-+	.release = gptu_release
-+};
-+
-+static struct miscdevice gptu_miscdev = {
-+	.minor = MISC_DYNAMIC_MINOR,
-+	.name = "gptu",
-+	.fops = &gptu_fops,
-+};
-+
-+static struct timer_dev timer_dev;
-+
-+static irqreturn_t timer_irq_handler(int irq, void *p)
-+{
-+	unsigned int timer;
-+	unsigned int flag;
-+	struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p;
-+
-+	timer = irq - TIMER_INTERRUPT;
-+	if (timer < timer_dev.number_of_timers
-+		&& dev_timer == &timer_dev.timer[timer]) {
-+		/*  Clear interrupt.    */
-+		ltq_w32(1 << timer, LQ_GPTU_IRNCR);
-+
-+		/*  Call user hanler or signal. */
-+		flag = dev_timer->flag;
-+		if (!(timer & 0x01)
-+			|| TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
-+			/* 16-bit timer or timer A of 32-bit timer  */
-+			switch (TIMER_FLAG_MASK_HANDLE(flag)) {
-+			case TIMER_FLAG_CALLBACK_IN_IRQ:
-+			case TIMER_FLAG_CALLBACK_IN_HB:
-+				if (dev_timer->arg1)
-+					(*(timer_callback)dev_timer->arg1)(dev_timer->arg2);
-+				break;
-+			case TIMER_FLAG_SIGNAL:
-+				send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0);
-+				break;
-+			}
-+		}
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+static inline void lq_enable_gptu(void)
-+{
-+	struct clk *clk = clk_get_sys("1e100a00.gptu", NULL);
-+	clk_enable(clk);
-+
-+	//ltq_pmu_enable(PMU_GPT);
-+
-+	/*  Set divider as 1, disable write protection for SPEN, enable module. */
-+	*LQ_GPTU_CLC =
-+		GPTU_CLC_SMC_SET(0x00) |
-+		GPTU_CLC_RMC_SET(0x01) |
-+		GPTU_CLC_FSOE_SET(0) |
-+		GPTU_CLC_SBWE_SET(1) |
-+		GPTU_CLC_EDIS_SET(0) |
-+		GPTU_CLC_SPEN_SET(0) |
-+		GPTU_CLC_DISR_SET(0);
-+}
-+
-+static inline void lq_disable_gptu(void)
-+{
-+	struct clk *clk = clk_get_sys("1e100a00.gptu", NULL);
-+	ltq_w32(0x00, LQ_GPTU_IRNEN);
-+	ltq_w32(0xfff, LQ_GPTU_IRNCR);
-+
-+	/*  Set divider as 0, enable write protection for SPEN, disable module. */
-+	*LQ_GPTU_CLC =
-+		GPTU_CLC_SMC_SET(0x00) |
-+		GPTU_CLC_RMC_SET(0x00) |
-+		GPTU_CLC_FSOE_SET(0) |
-+		GPTU_CLC_SBWE_SET(0) |
-+		GPTU_CLC_EDIS_SET(0) |
-+		GPTU_CLC_SPEN_SET(0) |
-+		GPTU_CLC_DISR_SET(1);
-+
-+	clk_enable(clk);
-+}
-+
-+int lq_request_timer(unsigned int timer, unsigned int flag,
-+	unsigned long value, unsigned long arg1, unsigned long arg2)
-+{
-+	int ret = 0;
-+	unsigned int con_reg, irnen_reg;
-+	int n, X;
-+
-+	if (timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...",
-+		timer, flag, value);
-+
-+	if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT)
-+		value &= 0xFFFF;
-+	else
-+		timer &= ~0x01;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	/*
-+	 *  Allocate timer.
-+	 */
-+	if (timer < FIRST_TIMER) {
-+		unsigned int mask;
-+		unsigned int shift;
-+		/* This takes care of TIMER1B which is the only choice for Voice TAPI system */
-+		unsigned int offset = TIMER2A;
-+
-+		/*
-+		 *  Pick up a free timer.
-+		 */
-+		if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
-+			mask = 1 << offset;
-+			shift = 1;
-+		} else {
-+			mask = 3 << offset;
-+			shift = 2;
-+		}
-+		for (timer = offset;
-+		     timer < offset + timer_dev.number_of_timers;
-+		     timer += shift, mask <<= shift)
-+			if (!(timer_dev.occupation & mask)) {
-+				timer_dev.occupation |= mask;
-+				break;
-+			}
-+		if (timer >= offset + timer_dev.number_of_timers) {
-+			printk("failed![%d]\n", __LINE__);
-+			mutex_unlock(&timer_dev.gptu_mutex);
-+			return -EINVAL;
-+		} else
-+			ret = timer;
-+	} else {
-+		register unsigned int mask;
-+
-+		/*
-+		 *  Check if the requested timer is free.
-+		 */
-+		mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+		if ((timer_dev.occupation & mask)) {
-+			printk("failed![%d] mask %#x, timer_dev.occupation %#x\n",
-+				__LINE__, mask, timer_dev.occupation);
-+			mutex_unlock(&timer_dev.gptu_mutex);
-+			return -EBUSY;
-+		} else {
-+			timer_dev.occupation |= mask;
-+			ret = 0;
-+		}
-+	}
-+
-+	/*
-+	 *  Prepare control register value.
-+	 */
-+	switch (TIMER_FLAG_MASK_EDGE(flag)) {
-+	default:
-+	case TIMER_FLAG_NONE_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x00);
-+		break;
-+	case TIMER_FLAG_RISE_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x01);
-+		break;
-+	case TIMER_FLAG_FALL_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x02);
-+		break;
-+	case TIMER_FLAG_ANY_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x03);
-+		break;
-+	}
-+	if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER)
-+		con_reg |=
-+			TIMER_FLAG_MASK_SRC(flag) ==
-+			TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) :
-+			GPTU_CON_SRC_EXT_SET(0);
-+	else
-+		con_reg |=
-+			TIMER_FLAG_MASK_SRC(flag) ==
-+			TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) :
-+			GPTU_CON_SRC_EG_SET(0);
-+	con_reg |=
-+		TIMER_FLAG_MASK_SYNC(flag) ==
-+		TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) :
-+		GPTU_CON_SYNC_SET(1);
-+	con_reg |=
-+		TIMER_FLAG_MASK_INVERT(flag) ==
-+		TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
-+	con_reg |=
-+		TIMER_FLAG_MASK_SIZE(flag) ==
-+		TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) :
-+		GPTU_CON_EXT_SET(1);
-+	con_reg |=
-+		TIMER_FLAG_MASK_STOP(flag) ==
-+		TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
-+	con_reg |=
-+		TIMER_FLAG_MASK_TYPE(flag) ==
-+		TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) :
-+		GPTU_CON_CNT_SET(1);
-+	con_reg |=
-+		TIMER_FLAG_MASK_DIR(flag) ==
-+		TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
-+
-+	/*
-+	 *  Fill up running data.
-+	 */
-+	timer_dev.timer[timer - FIRST_TIMER].flag = flag;
-+	timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1;
-+	timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag;
-+
-+	/*
-+	 *  Enable GPTU module.
-+	 */
-+	if (!timer_dev.f_gptu_on) {
-+		lq_enable_gptu();
-+		timer_dev.f_gptu_on = 1;
-+	}
-+
-+	/*
-+	 *  Enable IRQ.
-+	 */
-+	if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) {
-+		if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL)
-+			timer_dev.timer[timer - FIRST_TIMER].arg1 =
-+				(unsigned long) find_task_by_vpid((int) arg1);
-+
-+		irnen_reg = 1 << (timer - FIRST_TIMER);
-+
-+		if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL
-+		    || (TIMER_FLAG_MASK_HANDLE(flag) ==
-+			TIMER_FLAG_CALLBACK_IN_IRQ
-+			&& timer_dev.timer[timer - FIRST_TIMER].arg1)) {
-+			enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
-+			timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1;
-+		}
-+	} else
-+		irnen_reg = 0;
-+
-+	/*
-+	 *  Write config register, reload value and enable interrupt.
-+	 */
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+	*LQ_GPTU_CON(n, X) = con_reg;
-+	*LQ_GPTU_RELOAD(n, X) = value;
-+	/* printk("reload value = %d\n", (u32)value); */
-+	*LQ_GPTU_IRNEN |= irnen_reg;
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+	printk("successful!\n");
-+	return ret;
-+}
-+EXPORT_SYMBOL(lq_request_timer);
-+
-+int lq_free_timer(unsigned int timer)
-+{
-+	unsigned int flag;
-+	unsigned int mask;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	if (GPTU_CON_EN(n, X))
-+		*LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
-+
-+	*LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1);
-+	*LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1);
-+
-+	if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) {
-+		disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
-+		timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0;
-+	}
-+
-+	timer_dev.occupation &= ~mask;
-+	if (!timer_dev.occupation && timer_dev.f_gptu_on) {
-+		lq_disable_gptu();
-+		timer_dev.f_gptu_on = 0;
-+	}
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_free_timer);
-+
-+int lq_start_timer(unsigned int timer, int is_resume)
-+{
-+	unsigned int flag;
-+	unsigned int mask;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(flag) ==
-+	TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	*LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1);
-+
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_start_timer);
-+
-+int lq_stop_timer(unsigned int timer)
-+{
-+	unsigned int flag;
-+	unsigned int mask;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER
-+	    || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	*LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_stop_timer);
-+
-+int lq_reset_counter_flags(u32 timer, u32 flags)
-+{
-+	unsigned int oflag;
-+	unsigned int mask, con_reg;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	oflag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	switch (TIMER_FLAG_MASK_EDGE(flags)) {
-+	default:
-+	case TIMER_FLAG_NONE_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x00);
-+		break;
-+	case TIMER_FLAG_RISE_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x01);
-+		break;
-+	case TIMER_FLAG_FALL_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x02);
-+		break;
-+	case TIMER_FLAG_ANY_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x03);
-+		break;
-+	}
-+	if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER)
-+		con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0);
-+	else
-+		con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0);
-+	con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1);
-+	con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
-+	con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1);
-+	con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
-+	con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1);
-+	con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
-+
-+	timer_dev.timer[timer - FIRST_TIMER].flag = flags;
-+	if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT)
-+		timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags;
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	*LQ_GPTU_CON(n, X) = con_reg;
-+	smp_wmb();
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_reset_counter_flags);
-+
-+int lq_get_count_value(unsigned int timer, unsigned long *value)
-+{
-+	unsigned int flag;
-+	unsigned int mask;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER
-+	    || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	*value = *LQ_GPTU_COUNT(n, X);
-+
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_get_count_value);
-+
-+u32 lq_cal_divider(unsigned long freq)
-+{
-+	u64 module_freq, fpi = ltq_get_fpi_bus_clock(2);
-+	u32 clock_divider = 1;
-+	module_freq = fpi * 1000;
-+	do_div(module_freq, clock_divider * freq);
-+	return module_freq;
-+}
-+EXPORT_SYMBOL(lq_cal_divider);
-+
-+int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic,
-+	int is_ext_src, unsigned int handle_flag, unsigned long arg1,
-+	unsigned long arg2)
-+{
-+	unsigned long divider;
-+	unsigned int flag;
-+
-+	divider = lq_cal_divider(freq);
-+	if (divider == 0)
-+		return -EINVAL;
-+	flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT)
-+		| (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE)
-+		| (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC)
-+		| TIMER_FLAG_TIMER | TIMER_FLAG_DOWN
-+		| TIMER_FLAG_MASK_HANDLE(handle_flag);
-+
-+	printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n",
-+		timer, freq, divider);
-+	return lq_request_timer(timer, flag, divider, arg1, arg2);
-+}
-+EXPORT_SYMBOL(lq_set_timer);
-+
-+int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload,
-+	unsigned long arg1, unsigned long arg2)
-+{
-+	printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload);
-+	return lq_request_timer(timer, flag, reload, arg1, arg2);
-+}
-+EXPORT_SYMBOL(lq_set_counter);
-+
-+static long gptu_ioctl(struct file *file, unsigned int cmd,
-+	unsigned long arg)
-+{
-+	int ret;
-+	struct gptu_ioctl_param param;
-+
-+	if (!access_ok((void __user *)arg, sizeof(struct gptu_ioctl_param)))
-+		return -EFAULT;
-+	copy_from_user(&param, (void __user *)arg, sizeof(param));
-+
-+	if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
-+	       || GPTU_SET_COUNTER) && param.timer < 2)
-+	     || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
-+	    && !access_ok((void __user *)arg,
-+			   sizeof(struct gptu_ioctl_param)))
-+		return -EFAULT;
-+
-+	switch (cmd) {
-+	case GPTU_REQUEST_TIMER:
-+		ret = lq_request_timer(param.timer, param.flag, param.value,
-+				     (unsigned long) param.pid,
-+				     (unsigned long) param.sig);
-+		if (ret > 0) {
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      timer, &ret, sizeof(&ret));
-+			ret = 0;
-+		}
-+		break;
-+	case GPTU_FREE_TIMER:
-+		ret = lq_free_timer(param.timer);
-+		break;
-+	case GPTU_START_TIMER:
-+		ret = lq_start_timer(param.timer, param.flag);
-+		break;
-+	case GPTU_STOP_TIMER:
-+		ret = lq_stop_timer(param.timer);
-+		break;
-+	case GPTU_GET_COUNT_VALUE:
-+		ret = lq_get_count_value(param.timer, &param.value);
-+		if (!ret)
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      value, &param.value,
-+				      sizeof(param.value));
-+		break;
-+	case GPTU_CALCULATE_DIVIDER:
-+		param.value = lq_cal_divider(param.value);
-+		if (param.value == 0)
-+			ret = -EINVAL;
-+		else {
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      value, &param.value,
-+				      sizeof(param.value));
-+			ret = 0;
-+		}
-+		break;
-+	case GPTU_SET_TIMER:
-+		ret = lq_set_timer(param.timer, param.value,
-+				 TIMER_FLAG_MASK_STOP(param.flag) !=
-+				 TIMER_FLAG_ONCE ? 1 : 0,
-+				 TIMER_FLAG_MASK_SRC(param.flag) ==
-+				 TIMER_FLAG_EXT_SRC ? 1 : 0,
-+				 TIMER_FLAG_MASK_HANDLE(param.flag) ==
-+				 TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL :
-+				 TIMER_FLAG_NO_HANDLE,
-+				 (unsigned long) param.pid,
-+				 (unsigned long) param.sig);
-+		if (ret > 0) {
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      timer, &ret, sizeof(&ret));
-+			ret = 0;
-+		}
-+		break;
-+	case GPTU_SET_COUNTER:
-+		lq_set_counter(param.timer, param.flag, param.value, 0, 0);
-+		if (ret > 0) {
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      timer, &ret, sizeof(&ret));
-+			ret = 0;
-+		}
-+		break;
-+	default:
-+		ret = -ENOTTY;
-+	}
-+
-+	return ret;
-+}
-+
-+static int gptu_open(struct inode *inode, struct file *file)
-+{
-+	return 0;
-+}
-+
-+static int gptu_release(struct inode *inode, struct file *file)
-+{
-+	return 0;
-+}
-+
-+int __init lq_gptu_init(void)
-+{
-+	int ret;
-+	unsigned int i;
-+
-+	ltq_w32(0, LQ_GPTU_IRNEN);
-+	ltq_w32(0xfff, LQ_GPTU_IRNCR);
-+
-+	memset(&timer_dev, 0, sizeof(timer_dev));
-+	mutex_init(&timer_dev.gptu_mutex);
-+
-+	lq_enable_gptu();
-+	timer_dev.number_of_timers = GPTU_ID_CFG * 2;
-+	lq_disable_gptu();
-+	if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2)
-+		timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2;
-+	printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers);
-+
-+	ret = misc_register(&gptu_miscdev);
-+	if (ret) {
-+		printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret);
-+		return ret;
-+	} else {
-+		printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor);
-+	}
-+
-+	for (i = 0; i < timer_dev.number_of_timers; i++) {
-+		ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]);
-+		if (ret) {
-+			for (; i >= 0; i--)
-+				free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]);
-+			misc_deregister(&gptu_miscdev);
-+			printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret);
-+			return ret;
-+		} else {
-+			timer_dev.timer[i].irq = TIMER_INTERRUPT + i;
-+			disable_irq(timer_dev.timer[i].irq);
-+			printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq);
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+void __exit lq_gptu_exit(void)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < timer_dev.number_of_timers; i++) {
-+		if (timer_dev.timer[i].f_irq_on)
-+			disable_irq(timer_dev.timer[i].irq);
-+		free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]);
-+	}
-+	lq_disable_gptu();
-+	misc_deregister(&gptu_miscdev);
-+}
-+
-+module_init(lq_gptu_init);
-+module_exit(lq_gptu_exit);
-+
-+#endif
diff --git a/target/linux/lantiq/patches-5.10/0018-MTD-nand-lots-of-xrx200-fixes.patch b/target/linux/lantiq/patches-5.10/0018-MTD-nand-lots-of-xrx200-fixes.patch
deleted file mode 100644
index 35f656da6e76..000000000000
--- a/target/linux/lantiq/patches-5.10/0018-MTD-nand-lots-of-xrx200-fixes.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From 997a8965db8417266bea3fbdcfa3e5655a1b52fa Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 9 Sep 2014 23:12:15 +0200
-Subject: [PATCH 18/36] MTD: nand: lots of xrx200 fixes
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/raw/xway_nand.c |   63 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 63 insertions(+)
-
---- a/drivers/mtd/nand/raw/xway_nand.c
-+++ b/drivers/mtd/nand/raw/xway_nand.c
-@@ -61,6 +61,24 @@
- #define NAND_CON_CSMUX		(1 << 1)
- #define NAND_CON_NANDM		1
- 
-+#define DANUBE_PCI_REG32( addr )    (*(volatile u32 *)(addr))
-+#define PCI_CR_PR_OFFSET	    (KSEG1+0x1E105400)
-+#define PCI_CR_PC_ARB		    (PCI_CR_PR_OFFSET + 0x0080)
-+
-+/*
-+ * req_mask provides a mechanism to prevent interference between
-+ * nand and pci (probably only relevant for the BT Home Hub 2B).
-+ * Setting it causes the corresponding pci req pins to be masked
-+ * during nand access, and also moves ebu locking from the read/write
-+ * functions to the chip select function to ensure that the whole
-+ * operation runs with interrupts disabled.
-+ * In addition it switches on some extra waiting in xway_cmd_ctrl().
-+ * This seems to be necessary if the ebu_cs1 pin has open-drain disabled,
-+ * which in turn seems to be necessary for the nor chip to be recognised
-+ * reliably, on a board (Home Hub 2B again) which has both nor and nand.
-+ */
-+static __be32 req_mask = 0;
-+
- struct xway_nand_data {
- 	struct nand_controller	controller;
- 	struct nand_chip	chip;
-@@ -92,10 +110,22 @@ static void xway_select_chip(struct nand
- 	case -1:
- 		ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
- 		ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
-+
-+		if (req_mask) {
-+			/* Unmask all external PCI request */
-+			DANUBE_PCI_REG32(PCI_CR_PC_ARB) &= ~(req_mask << 16);
-+		}
-+
- 		spin_unlock_irqrestore(&ebu_lock, data->csflags);
- 		break;
- 	case 0:
- 		spin_lock_irqsave(&ebu_lock, data->csflags);
-+
-+		if (req_mask) {
-+			/* Mask all external PCI request */
-+			DANUBE_PCI_REG32(PCI_CR_PC_ARB) |= (req_mask << 16);
-+		}
-+
- 		ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
- 		ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
- 		break;
-@@ -108,6 +138,11 @@ static void xway_cmd_ctrl(struct nand_ch
- {
- 	struct mtd_info *mtd = nand_to_mtd(chip);
- 
-+	if (req_mask) {
-+		if (cmd != NAND_CMD_STATUS)
-+			ltq_ebu_w32(0, EBU_NAND_WAIT); /* Clear nand ready */
-+	}
-+
- 	if (cmd == NAND_CMD_NONE)
- 		return;
- 
-@@ -118,6 +153,24 @@ static void xway_cmd_ctrl(struct nand_ch
- 
- 	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- 		;
-+
-+	if (req_mask) {
-+	       /*
-+		* program and erase have their own busy handlers
-+		* status and sequential in needs no delay
-+		*/
-+		switch (cmd) {
-+			case NAND_CMD_ERASE1:
-+			case NAND_CMD_SEQIN:
-+			case NAND_CMD_STATUS:
-+			case NAND_CMD_READID:
-+			return;
-+		}
-+
-+		/* wait until command is processed */
-+		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD) == 0)
-+			;
-+	}
- }
- 
- static int xway_dev_ready(struct nand_chip *chip)
-@@ -170,6 +223,7 @@ static int xway_nand_probe(struct platfo
- 	int err;
- 	u32 cs;
- 	u32 cs_flag = 0;
-+	const __be32 *req_mask_ptr;
- 
- 	/* Allocate memory for the device structure (and zero it) */
- 	data = devm_kzalloc(&pdev->dev, sizeof(struct xway_nand_data),
-@@ -206,6 +260,15 @@ static int xway_nand_probe(struct platfo
- 	if (!err && cs == 1)
- 		cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
- 
-+	req_mask_ptr = of_get_property(pdev->dev.of_node,
-+					"req-mask", NULL);
-+
-+	/*
-+	 * Load the PCI req lines to mask from the device tree. If the
-+	 * property is not present, setting req_mask to 0 disables masking.
-+	 */
-+	req_mask = (req_mask_ptr ? *req_mask_ptr : 0);
-+
- 	/* setup the EBU to run in NAND mode on our base addr */
- 	ltq_ebu_w32(CPHYSADDR(data->nandaddr)
- 		    | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
diff --git a/target/linux/lantiq/patches-5.10/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-5.10/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
deleted file mode 100644
index c1fc59487af4..000000000000
--- a/target/linux/lantiq/patches-5.10/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From e3b20f04e9f9cae1babe091fdc1d08d7703ae344 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:18:00 +0200
-Subject: [PATCH 20/36] MTD: lantiq: handle NO_XIP on cfi0001 flash
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/maps/lantiq-flash.c |    6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/maps/lantiq-flash.c
-+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -129,7 +129,11 @@ ltq_mtd_probe(struct platform_device *pd
- 	if (!ltq_mtd->map)
- 		return -ENOMEM;
- 
--	ltq_mtd->map->phys = ltq_mtd->res->start;
-+	if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
-+		ltq_mtd->map->phys = NO_XIP;
-+	else
-+		ltq_mtd->map->phys = ltq_mtd->res->start;
-+	ltq_mtd->res->start;
- 	ltq_mtd->map->size = resource_size(ltq_mtd->res);
- 	ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
- 	if (IS_ERR(ltq_mtd->map->virt))
diff --git a/target/linux/lantiq/patches-5.10/0023-NET-PHY-add-led-support-for-intel-xway.patch b/target/linux/lantiq/patches-5.10/0023-NET-PHY-add-led-support-for-intel-xway.patch
deleted file mode 100644
index fb8d97511066..000000000000
--- a/target/linux/lantiq/patches-5.10/0023-NET-PHY-add-led-support-for-intel-xway.patch
+++ /dev/null
@@ -1,294 +0,0 @@
-From 0a63ab263725c427051a8bbaa0732b749627da27 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:15:36 +0200
-Subject: [PATCH 23/36] NET: PHY: adds driver for lantiq PHY11G
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/Kconfig  |    5 +
- drivers/net/phy/Makefile |    1 +
- drivers/net/phy/lantiq.c |  231 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 237 insertions(+)
- create mode 100644 drivers/net/phy/lantiq.c
-
---- a/drivers/net/phy/intel-xway.c
-+++ b/drivers/net/phy/intel-xway.c
-@@ -157,6 +157,51 @@
- #define PHY_ID_PHY11G_VR9_1_2		0xD565A409
- #define PHY_ID_PHY22F_VR9_1_2		0xD565A419
- 
-+#if IS_ENABLED(CONFIG_OF_MDIO)
-+static int vr9_gphy_of_reg_init(struct phy_device *phydev)
-+{
-+	u32 tmp;
-+
-+	/* store the led values if one was passed by the devicetree */
-+	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledch", &tmp))
-+		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCH, tmp);
-+
-+	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledcl", &tmp))
-+		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCL, tmp);
-+
-+	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0h", &tmp))
-+		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0H, tmp);
-+
-+	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0l", &tmp))
-+		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0L, tmp);
-+
-+	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1h", &tmp))
-+		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1H, tmp);
-+
-+	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1l", &tmp))
-+		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1L, tmp);
-+
-+	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2h", &tmp))
-+		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H,  tmp);
-+
-+	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2l", &tmp))
-+		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, tmp);
-+
-+	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3h", &tmp))
-+		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3H, tmp);
-+
-+	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3l", &tmp))
-+		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3L, tmp);
-+
-+	return 0;
-+}
-+#else
-+static int vr9_gphy_of_reg_init(struct phy_device *phydev)
-+{
-+	return 0;
-+}
-+#endif /* CONFIG_OF_MDIO */
-+
- static int xway_gphy_config_init(struct phy_device *phydev)
- {
- 	int err;
-@@ -204,6 +249,7 @@ static int xway_gphy_config_init(struct
- 	phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H, ledxh);
- 	phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, ledxl);
- 
-+	vr9_gphy_of_reg_init(phydev);
- 	return 0;
- }
- 
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/phy-lanitq.txt
-@@ -0,0 +1,216 @@
-+Lanitq PHY binding
-+============================================
-+
-+This devicetree binding controls the lantiq ethernet phys led functionality.
-+
-+Example:
-+	mdio@0 {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		compatible = "lantiq,xrx200-mdio";
-+			phy5: ethernet-phy@5 {
-+			reg = <0x1>;
-+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-+		};
-+		phy11: ethernet-phy@11 {
-+			reg = <0x11>;
-+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-+			lantiq,led2h = <0x00>;
-+			lantiq,led2l = <0x03>;
-+		};
-+		phy12: ethernet-phy@12 {
-+			reg = <0x12>;
-+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-+			lantiq,led1h = <0x00>;
-+			lantiq,led1l = <0x03>;
-+		};
-+		phy13: ethernet-phy@13 {
-+			reg = <0x13>;
-+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-+			lantiq,led2h = <0x00>;
-+			lantiq,led2l = <0x03>;
-+		};
-+		phy14: ethernet-phy@14 {
-+			reg = <0x14>;
-+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-+			lantiq,led1h = <0x00>;
-+			lantiq,led1l = <0x03>;
-+		};
-+	};
-+
-+Register Description
-+============================================
-+
-+LEDCH:
-+
-+Name	Hardware Reset Value
-+LEDCH	0x00C5
-+
-+| 15 |    |    |    |    |    |    |  8 |
-+=========================================
-+|		RES			|
-+=========================================
-+
-+|  7 |    |    |    |    |    |    |  0 |
-+=========================================
-+|   FBF   |   SBF   |RES |     NACS     |
-+=========================================
-+
-+Field	Bits	Type	Description
-+FBF	7:6	RW	Fast Blink Frequency
-+			---
-+			0x0 (00b) F02HZ 2 Hz blinking frequency
-+			0x1 (01b) F04HZ 4 Hz blinking frequency
-+			0x2 (10b) F08HZ 8 Hz blinking frequency
-+			0x3 (11b) F16HZ 16 Hz blinking frequency
-+
-+SBF	5:4	RW	Slow Blink Frequency
-+			---
-+			0x0 (00b) F02HZ 2 Hz blinking frequency
-+			0x1 (01b) F04HZ 4 Hz blinking frequency
-+			0x2 (10b) F08HZ 8 Hz blinking frequency
-+			0x3 (11b) F16HZ 16 Hz blinking frequency
-+
-+NACS	2:0	RW	Inverse of Scan Function
-+			---
-+			0x0 (000b) NONE No Function
-+			0x1 (001b) LINK Complex function enabled when link is up
-+			0x2 (010b) PDOWN Complex function enabled when device is powered-down
-+			0x3 (011b) EEE Complex function enabled when device is in EEE mode
-+			0x4 (100b) ANEG Complex function enabled when auto-negotiation is running
-+			0x5 (101b) ABIST Complex function enabled when analog self-test is running
-+			0x6 (110b) CDIAG Complex function enabled when cable diagnostics are running
-+			0x7 (111b) TEST Complex function enabled when test mode is running
-+
-+LEDCL:
-+
-+Name	Hardware Reset Value
-+LEDCL	0x0067
-+
-+| 15 |    |    |    |    |    |    |  8 |
-+=========================================
-+|		RES			|
-+=========================================
-+
-+|  7 |    |    |    |    |    |    |  0 |
-+=========================================
-+|RES |     SCAN     |RES |    CBLINK    |
-+=========================================
-+
-+Field	Bits	Type	Description
-+SCAN	6:4	RW	Complex Scan Configuration
-+			---
-+			000 B NONE No Function
-+			001 B LINK Complex function enabled when link is up
-+			010 B PDOWN Complex function enabled when device is powered-down
-+			011 B EEE Complex function enabled when device is in EEE mode
-+			100 B ANEG Complex function enabled when auto-negotiation is running
-+			101 B ABIST Complex function enabled when analog self-test is running
-+			110 B CDIAG Complex function enabled when cable diagnostics are running
-+			111 B TEST Complex function enabled when test mode is running
-+
-+CBLINK	2:0	RW	Complex Blinking Configuration
-+			---
-+			000 B NONE No Function
-+			001 B LINK Complex function enabled when link is up
-+			010 B PDOWN Complex function enabled when device is powered-down
-+			011 B EEE Complex function enabled when device is in EEE mode
-+			100 B ANEG Complex function enabled when auto-negotiation is running
-+			101 B ABIST Complex function enabled when analog self-test is running
-+			110 B CDIAG Complex function enabled when cable diagnostics are running
-+			111 B TEST Complex function enabled when test mode is running
-+
-+LEDxH:
-+
-+Name	Hardware Reset Value
-+LED0H	0x0070
-+LED1H	0x0020
-+LED2H	0x0040
-+LED3H	0x0040
-+
-+| 15 |    |    |    |    |    |    |  8 |
-+=========================================
-+|		RES			|
-+=========================================
-+
-+|  7 |    |    |    |    |    |    |  0 |
-+=========================================
-+|        CON        |       BLINKF      |
-+=========================================
-+
-+Field	Bits	Type	Description
-+CON	7:4	RW	Constant On Configuration
-+			---
-+			0x0 (0000b) NONE LED does not light up constantly
-+			0x1 (0001b) LINK10 LED is on when link is 10 Mbit/s
-+			0x2 (0010b) LINK100 LED is on when link is 100 Mbit/s
-+			0x3 (0011b) LINK10X LED is on when link is 10/100 Mbit/s
-+			0x4 (0100b) LINK1000 LED is on when link is 1000 Mbit/s
-+			0x5 (0101b) LINK10_0 LED is on when link is 10/1000 Mbit/s
-+			0x6 (0110b) LINK100X LED is on when link is 100/1000 Mbit/s
-+			0x7 (0111b) LINK10XX LED is on when link is 10/100/1000 Mbit/s
-+			0x8 (1000b) PDOWN LED is on when device is powered-down
-+			0x9 (1001b) EEE LED is on when device is in EEE mode
-+			0xA (1010b) ANEG LED is on when auto-negotiation is running
-+			0xB (1011b) ABIST LED is on when analog self-test is running
-+			0xC (1100b) CDIAG LED is on when cable diagnostics are running
-+
-+BLINKF	3:0	RW	Fast Blinking Configuration
-+			---
-+			0x0 (0000b) NONE No Blinking
-+			0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
-+			0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
-+			0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
-+			0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
-+			0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
-+			0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
-+			0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
-+			0x8 (1000b) PDOWN Blink when device is powered-down
-+			0x9 (1001b) EEE Blink when device is in EEE mode
-+			0xA (1010b) ANEG Blink when auto-negotiation is running
-+			0xB (1011b) ABIST Blink when analog self-test is running
-+			0xC (1100b) CDIAG Blink when cable diagnostics are running
-+
-+LEDxL:
-+
-+Name	Hardware Reset Value
-+LED0L	0x0003
-+LED1L	0x0000
-+LED2L	0x0000
-+LED3L	0x0020
-+
-+| 15 |    |    |    |    |    |    |  8 |
-+=========================================
-+|		RES			|
-+=========================================
-+
-+|  7 |    |    |    |    |    |    |  0 |
-+=========================================
-+|      BLINKS       |       PULSE       |
-+=========================================
-+
-+Field	Bits	Type	Description
-+BLINKS	7:4	RW	Slow Blinkin Configuration
-+			---
-+			0x0 (0000b) NONE No Blinking
-+			0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
-+			0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
-+			0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
-+			0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
-+			0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
-+			0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
-+			0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
-+			0x8 (1000b) PDOWN Blink when device is powered-down
-+			0x9 (1001b) EEE Blink when device is in EEE mode
-+			0xA (1010b) ANEG Blink when auto-negotiation is running
-+			0xB (1011b) ABIST Blink when analog self-test is running
-+			0xC (1100b) CDIAG Blink when cable diagnostics are runningning
-+
-+PULSE	3:0	RW	Pulsing Configuration
-+			The pulse field is a mask field by which certain events can be combined
-+			---
-+			0x0 (0000b) NONE No pulsing
-+			0x1 (0001b) TXACT Transmit activity
-+			0x2 (0010b) RXACT Receive activity
-+			0x4 (0100b) COL Collision
-+			0x8 (1000b) RES Reserved
diff --git a/target/linux/lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch
deleted file mode 100644
index e9f3ee473b49..000000000000
--- a/target/linux/lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch
+++ /dev/null
@@ -1,864 +0,0 @@
-From 870ed9cae083ff8a60a739ef7e74c5a1800533be Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 9 Sep 2014 22:45:34 +0200
-Subject: [PATCH 28/36] NET: lantiq: various etop fixes
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/ethernet/lantiq_etop.c |  555 +++++++++++++++++++++++++-----------
- 1 file changed, 389 insertions(+), 166 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -1,7 +1,7 @@
- // SPDX-License-Identifier: GPL-2.0-only
- /*
-  *
-- *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ *   Copyright (C) 2011-12 John Crispin <blogic@openwrt.org>
-  */
- 
- #include <linux/kernel.h>
-@@ -20,11 +20,16 @@
- #include <linux/mm.h>
- #include <linux/platform_device.h>
- #include <linux/ethtool.h>
-+#include <linux/if_vlan.h>
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/io.h>
- #include <linux/dma-mapping.h>
- #include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/of_net.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_platform.h>
- 
- #include <asm/checksum.h>
- 
-@@ -32,7 +37,7 @@
- #include <xway_dma.h>
- #include <lantiq_platform.h>
- 
--#define LTQ_ETOP_MDIO		0x11804
-+#define LTQ_ETOP_MDIO_ACC	0x11804
- #define MDIO_REQUEST		0x80000000
- #define MDIO_READ		0x40000000
- #define MDIO_ADDR_MASK		0x1f
-@@ -41,44 +46,91 @@
- #define MDIO_REG_OFFSET		0x10
- #define MDIO_VAL_MASK		0xffff
- 
--#define PPE32_CGEN		0x800
--#define LQ_PPE32_ENET_MAC_CFG	0x1840
-+#define LTQ_ETOP_MDIO_CFG       0x11800
-+#define MDIO_CFG_MASK           0x6
-+
-+#define LTQ_ETOP_CFG            0x11808
-+#define LTQ_ETOP_IGPLEN         0x11820
-+#define LTQ_ETOP_MAC_CFG	0x11840
- 
- #define LTQ_ETOP_ENETS0		0x11850
- #define LTQ_ETOP_MAC_DA0	0x1186C
- #define LTQ_ETOP_MAC_DA1	0x11870
--#define LTQ_ETOP_CFG		0x16020
--#define LTQ_ETOP_IGPLEN		0x16080
-+
-+#define MAC_CFG_MASK		0xfff
-+#define MAC_CFG_CGEN		(1 << 11)
-+#define MAC_CFG_DUPLEX		(1 << 2)
-+#define MAC_CFG_SPEED		(1 << 1)
-+#define MAC_CFG_LINK		(1 << 0)
- 
- #define MAX_DMA_CHAN		0x8
- #define MAX_DMA_CRC_LEN		0x4
- #define MAX_DMA_DATA_LEN	0x600
- 
- #define ETOP_FTCU		BIT(28)
--#define ETOP_MII_MASK		0xf
--#define ETOP_MII_NORMAL		0xd
--#define ETOP_MII_REVERSE	0xe
- #define ETOP_PLEN_UNDER		0x40
--#define ETOP_CGEN		0x800
-+#define ETOP_CFG_MII0		0x01
- 
--/* use 2 static channels for TX/RX */
--#define LTQ_ETOP_TX_CHANNEL	1
--#define LTQ_ETOP_RX_CHANNEL	6
--#define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
--#define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
-+#define ETOP_CFG_MASK           0xfff
-+#define ETOP_CFG_FEN0		(1 << 8)
-+#define ETOP_CFG_SEN0		(1 << 6)
-+#define ETOP_CFG_OFF1		(1 << 3)
-+#define ETOP_CFG_REMII0		(1 << 1)
-+#define ETOP_CFG_OFF0		(1 << 0)
-+
-+#define LTQ_GBIT_MDIO_CTL	0xCC
-+#define LTQ_GBIT_MDIO_DATA	0xd0
-+#define LTQ_GBIT_GCTL0		0x68
-+#define LTQ_GBIT_PMAC_HD_CTL	0x8c
-+#define LTQ_GBIT_P0_CTL		0x4
-+#define LTQ_GBIT_PMAC_RX_IPG	0xa8
-+#define LTQ_GBIT_RGMII_CTL	0x78
-+
-+#define PMAC_HD_CTL_AS		(1 << 19)
-+#define PMAC_HD_CTL_RXSH	(1 << 22)
-+
-+/* Switch Enable (0=disable, 1=enable) */
-+#define GCTL0_SE		0x80000000
-+/* Disable MDIO auto polling (0=disable, 1=enable) */
-+#define PX_CTL_DMDIO		0x00400000
-+
-+/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */
-+#define MDC_CLOCK_MASK		0xff000000
-+#define MDC_CLOCK_OFFSET	24
-+
-+/* register information for the gbit's MDIO bus */
-+#define MDIO_XR9_REQUEST	0x00008000
-+#define MDIO_XR9_READ		0x00000800
-+#define MDIO_XR9_WRITE		0x00000400
-+#define MDIO_XR9_REG_MASK	0x1f
-+#define MDIO_XR9_ADDR_MASK	0x1f
-+#define MDIO_XR9_RD_MASK	0xffff
-+#define MDIO_XR9_REG_OFFSET	0
-+#define MDIO_XR9_ADDR_OFFSET	5
-+#define MDIO_XR9_WR_OFFSET	16
- 
-+#define LTQ_DMA_ETOP	((of_machine_is_compatible("lantiq,ase")) ? \
-+			(INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
-+
-+/* the newer xway socks have a embedded 3/7 port gbit multiplexer */
- #define ltq_etop_r32(x)		ltq_r32(ltq_etop_membase + (x))
- #define ltq_etop_w32(x, y)	ltq_w32(x, ltq_etop_membase + (y))
- #define ltq_etop_w32_mask(x, y, z)	\
- 		ltq_w32_mask(x, y, ltq_etop_membase + (z))
- 
--#define DRV_VERSION	"1.0"
-+#define ltq_gbit_r32(x)		ltq_r32(ltq_gbit_membase + (x))
-+#define ltq_gbit_w32(x, y)	ltq_w32(x, ltq_gbit_membase + (y))
-+#define ltq_gbit_w32_mask(x, y, z)	\
-+		ltq_w32_mask(x, y, ltq_gbit_membase + (z))
-+
-+#define DRV_VERSION	"1.2"
- 
- static void __iomem *ltq_etop_membase;
-+static void __iomem *ltq_gbit_membase;
- 
- struct ltq_etop_chan {
--	int idx;
- 	int tx_free;
-+	int irq;
- 	struct net_device *netdev;
- 	struct napi_struct napi;
- 	struct ltq_dma_channel dma;
-@@ -88,23 +140,36 @@ struct ltq_etop_chan {
- struct ltq_etop_priv {
- 	struct net_device *netdev;
- 	struct platform_device *pdev;
--	struct ltq_eth_data *pldata;
- 	struct resource *res;
- 
- 	struct mii_bus *mii_bus;
- 
--	struct ltq_etop_chan ch[MAX_DMA_CHAN];
--	int tx_free[MAX_DMA_CHAN >> 1];
-+	struct ltq_etop_chan txch;
-+	struct ltq_etop_chan rxch;
- 
--	spinlock_t lock;
-+	int tx_irq;
-+	int rx_irq;
-+
-+	unsigned char mac[6];
-+	phy_interface_t mii_mode;
-+ 
-+ 	spinlock_t lock;
-+
-+	struct clk *clk_ppe;
-+	struct clk *clk_switch;
-+	struct clk *clk_ephy;
-+	struct clk *clk_ephycgu;
- };
- 
-+static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
-+				int phy_reg, u16 phy_data);
-+
- static int
- ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
- 
--	ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN);
-+	ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
- 	if (!ch->skb[ch->dma.desc])
- 		return -ENOMEM;
- 	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(&priv->pdev->dev,
-@@ -139,8 +204,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan
- 	spin_unlock_irqrestore(&priv->lock, flags);
- 
- 	skb_put(skb, len);
-+	skb->dev = ch->netdev;
- 	skb->protocol = eth_type_trans(skb, ch->netdev);
- 	netif_receive_skb(skb);
-+	ch->netdev->stats.rx_packets++;
-+	ch->netdev->stats.rx_bytes += len;
- }
- 
- static int
-@@ -148,7 +216,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
- {
- 	struct ltq_etop_chan *ch = container_of(napi,
- 				struct ltq_etop_chan, napi);
-+	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
- 	int work_done = 0;
-+	unsigned long flags;
- 
- 	while (work_done < budget) {
- 		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-@@ -160,7 +230,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
- 	}
- 	if (work_done < budget) {
- 		napi_complete_done(&ch->napi, work_done);
-+		spin_lock_irqsave(&priv->lock, flags);
- 		ltq_dma_ack_irq(&ch->dma);
-+		spin_unlock_irqrestore(&priv->lock, flags);
- 	}
- 	return work_done;
- }
-@@ -172,12 +244,14 @@ ltq_etop_poll_tx(struct napi_struct *nap
- 		container_of(napi, struct ltq_etop_chan, napi);
- 	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
- 	struct netdev_queue *txq =
--		netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
-+		netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1);
- 	unsigned long flags;
- 
- 	spin_lock_irqsave(&priv->lock, flags);
- 	while ((ch->dma.desc_base[ch->tx_free].ctl &
- 			(LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+		ch->netdev->stats.tx_packets++;
-+		ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len;
- 		dev_kfree_skb_any(ch->skb[ch->tx_free]);
- 		ch->skb[ch->tx_free] = NULL;
- 		memset(&ch->dma.desc_base[ch->tx_free], 0,
-@@ -190,7 +264,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
- 	if (netif_tx_queue_stopped(txq))
- 		netif_tx_start_queue(txq);
- 	napi_complete(&ch->napi);
-+	spin_lock_irqsave(&priv->lock, flags);
- 	ltq_dma_ack_irq(&ch->dma);
-+	spin_unlock_irqrestore(&priv->lock, flags);
- 	return 1;
- }
- 
-@@ -198,9 +274,10 @@ static irqreturn_t
- ltq_etop_dma_irq(int irq, void *_priv)
- {
- 	struct ltq_etop_priv *priv = _priv;
--	int ch = irq - LTQ_DMA_CH0_INT;
--
--	napi_schedule(&priv->ch[ch].napi);
-+	if (irq == priv->txch.dma.irq)
-+		napi_schedule(&priv->txch.napi);
-+	else
-+		napi_schedule(&priv->rxch.napi);
- 	return IRQ_HANDLED;
- }
- 
-@@ -212,7 +289,7 @@ ltq_etop_free_channel(struct net_device
- 	ltq_dma_free(&ch->dma);
- 	if (ch->dma.irq)
- 		free_irq(ch->dma.irq, priv);
--	if (IS_RX(ch->idx)) {
-+	if (ch == &priv->txch) {
- 		int desc;
- 		for (desc = 0; desc < LTQ_DESC_NUM; desc++)
- 			dev_kfree_skb_any(ch->skb[ch->dma.desc]);
-@@ -223,66 +300,135 @@ static void
- ltq_etop_hw_exit(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int i;
- 
--	ltq_pmu_disable(PMU_PPE);
--	for (i = 0; i < MAX_DMA_CHAN; i++)
--		if (IS_TX(i) || IS_RX(i))
--			ltq_etop_free_channel(dev, &priv->ch[i]);
-+	clk_disable(priv->clk_ppe);
-+
-+	if (of_machine_is_compatible("lantiq,ar9"))
-+		clk_disable(priv->clk_switch);
-+
-+	if (of_machine_is_compatible("lantiq,ase")) {
-+		clk_disable(priv->clk_ephy);
-+		clk_disable(priv->clk_ephycgu);
-+	}
-+
-+	ltq_etop_free_channel(dev, &priv->txch);
-+	ltq_etop_free_channel(dev, &priv->rxch);
-+}
-+
-+static void
-+ltq_etop_gbit_init(struct net_device *dev)
-+{
-+	struct ltq_etop_priv *priv = netdev_priv(dev);
-+
-+	clk_enable(priv->clk_switch);
-+
-+	/* enable gbit port0 on the SoC */
-+	ltq_gbit_w32_mask((1 << 17), (1 << 18), LTQ_GBIT_P0_CTL);
-+
-+	ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
-+	/* disable MDIO auto polling mode */
-+	ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
-+	/* set 1522 packet size */
-+	ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0);
-+	/* disable pmac & dmac headers */
-+	ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0,
-+		LTQ_GBIT_PMAC_HD_CTL);
-+	/* Due to traffic halt when burst length 8,
-+		replace default IPG value with 0x3B */
-+	ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG);
-+	/* set mdc clock to 2.5 MHz */
-+	ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET,
-+		LTQ_GBIT_RGMII_CTL);
- }
- 
- static int
- ltq_etop_hw_init(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int i;
-+	phy_interface_t mii_mode = priv->mii_mode;
- 
--	ltq_pmu_enable(PMU_PPE);
-+	clk_enable(priv->clk_ppe);
- 
--	switch (priv->pldata->mii_mode) {
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		ltq_etop_gbit_init(dev);
-+		/* force the etops link to the gbit to MII */
-+		mii_mode = PHY_INTERFACE_MODE_MII;
-+	}
-+	ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG);
-+	ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX |
-+			MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG);
-+
-+	switch (mii_mode) {
- 	case PHY_INTERFACE_MODE_RMII:
--		ltq_etop_w32_mask(ETOP_MII_MASK,
--			ETOP_MII_REVERSE, LTQ_ETOP_CFG);
-+		ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_REMII0 | ETOP_CFG_OFF1 |
-+			ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
- 		break;
- 
- 	case PHY_INTERFACE_MODE_MII:
--		ltq_etop_w32_mask(ETOP_MII_MASK,
--			ETOP_MII_NORMAL, LTQ_ETOP_CFG);
-+		ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_OFF1 |
-+			ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
- 		break;
- 
- 	default:
-+		if (of_machine_is_compatible("lantiq,ase")) {
-+			clk_enable(priv->clk_ephy);
-+			/* disable external MII */
-+			ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
-+			/* enable clock for internal PHY */
-+			clk_enable(priv->clk_ephycgu);
-+			/* we need to write this magic to the internal phy to
-+			   make it work */
-+			ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
-+			pr_info("Selected EPHY mode\n");
-+			break;
-+		}
- 		netdev_err(dev, "unknown mii mode %d\n",
--			priv->pldata->mii_mode);
-+			mii_mode);
- 		return -ENOTSUPP;
- 	}
- 
--	/* enable crc generation */
--	ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
-+	return 0;
-+}
-+
-+static int
-+ltq_etop_dma_init(struct net_device *dev)
-+{
-+	struct ltq_etop_priv *priv = netdev_priv(dev);
-+	int tx = priv->tx_irq - LTQ_DMA_ETOP;
-+	int rx = priv->rx_irq - LTQ_DMA_ETOP;
-+	int err;
- 
- 	ltq_dma_init_port(DMA_PORT_ETOP);
- 
--	for (i = 0; i < MAX_DMA_CHAN; i++) {
--		int irq = LTQ_DMA_CH0_INT + i;
--		struct ltq_etop_chan *ch = &priv->ch[i];
--
--		ch->idx = ch->dma.nr = i;
--		ch->dma.dev = &priv->pdev->dev;
--
--		if (IS_TX(i)) {
--			ltq_dma_alloc_tx(&ch->dma);
--			request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
--		} else if (IS_RX(i)) {
--			ltq_dma_alloc_rx(&ch->dma);
--			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
--					ch->dma.desc++)
--				if (ltq_etop_alloc_skb(ch))
--					return -ENOMEM;
--			ch->dma.desc = 0;
--			request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);
-+	priv->txch.dma.nr = tx;
-+	priv->txch.dma.dev = &priv->pdev->dev;
-+	ltq_dma_alloc_tx(&priv->txch.dma);
-+	err = request_irq(priv->tx_irq, ltq_etop_dma_irq, 0, "eth_tx", priv);
-+	if (err) {
-+		netdev_err(dev, "failed to allocate tx irq\n");
-+		goto err_out;
-+	}
-+	priv->txch.dma.irq = priv->tx_irq;
-+
-+	priv->rxch.dma.nr = rx;
-+	priv->rxch.dma.dev = &priv->pdev->dev;
-+	ltq_dma_alloc_rx(&priv->rxch.dma);
-+	for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM;
-+			priv->rxch.dma.desc++) {
-+		if (ltq_etop_alloc_skb(&priv->rxch)) {
-+			netdev_err(dev, "failed to allocate skbs\n");
-+			err = -ENOMEM;
-+			goto err_out;
- 		}
--		ch->dma.irq = irq;
- 	}
--	return 0;
-+	priv->rxch.dma.desc = 0;
-+	err = request_irq(priv->rx_irq, ltq_etop_dma_irq, 0, "eth_rx", priv);
-+	if (err)
-+		netdev_err(dev, "failed to allocate rx irq\n");
-+	else
-+		priv->rxch.dma.irq = priv->rx_irq;
-+err_out:
-+	return err;
- }
- 
- static void
-@@ -301,6 +447,39 @@ static const struct ethtool_ops ltq_etop
- };
- 
- static int
-+ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr,
-+		int phy_reg, u16 phy_data)
-+{
-+	u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE |
-+		(phy_data << MDIO_XR9_WR_OFFSET) |
-+		((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
-+		((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
-+
-+	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+		;
-+	ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
-+	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+		;
-+	return 0;
-+}
-+
-+static int
-+ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg)
-+{
-+	u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ |
-+		((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
-+		((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
-+
-+	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+		;
-+	ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
-+	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+		;
-+	val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK;
-+	return val;
-+}
-+
-+static int
- ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
- {
- 	u32 val = MDIO_REQUEST |
-@@ -308,9 +487,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
- 		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
- 		phy_data;
- 
--	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
-+	while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
- 		;
--	ltq_etop_w32(val, LTQ_ETOP_MDIO);
-+	ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
- 	return 0;
- }
- 
-@@ -321,12 +500,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
- 		((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
- 		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
- 
--	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
-+	while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
- 		;
--	ltq_etop_w32(val, LTQ_ETOP_MDIO);
--	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
-+	ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
-+	while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
- 		;
--	val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK;
-+	val = ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_VAL_MASK;
- 	return val;
- }
- 
-@@ -342,7 +521,10 @@ ltq_etop_mdio_probe(struct net_device *d
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
- 	struct phy_device *phydev;
- 
--	phydev = phy_find_first(priv->mii_bus);
-+	if (of_machine_is_compatible("lantiq,ase"))
-+		phydev = mdiobus_get_phy(priv->mii_bus, 8);
-+	else
-+		phydev = mdiobus_get_phy(priv->mii_bus, 0);
- 
- 	if (!phydev) {
- 		netdev_err(dev, "no PHY found\n");
-@@ -350,14 +532,17 @@ ltq_etop_mdio_probe(struct net_device *d
- 	}
- 
- 	phydev = phy_connect(dev, phydev_name(phydev),
--			     &ltq_etop_mdio_link, priv->pldata->mii_mode);
-+			     &ltq_etop_mdio_link, priv->mii_mode);
- 
- 	if (IS_ERR(phydev)) {
- 		netdev_err(dev, "Could not attach to PHY\n");
- 		return PTR_ERR(phydev);
- 	}
- 
--	phy_set_max_speed(phydev, SPEED_100);
-+	if (of_machine_is_compatible("lantiq,ar9"))
-+		phy_set_max_speed(phydev, SPEED_1000);
-+	else
-+		phy_set_max_speed(phydev, SPEED_100);
- 
- 	phy_attached_info(phydev);
- 
-@@ -378,8 +563,13 @@ ltq_etop_mdio_init(struct net_device *de
- 	}
- 
- 	priv->mii_bus->priv = dev;
--	priv->mii_bus->read = ltq_etop_mdio_rd;
--	priv->mii_bus->write = ltq_etop_mdio_wr;
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		priv->mii_bus->read = ltq_etop_mdio_rd_xr9;
-+		priv->mii_bus->write = ltq_etop_mdio_wr_xr9;
-+	} else {
-+		priv->mii_bus->read = ltq_etop_mdio_rd;
-+		priv->mii_bus->write = ltq_etop_mdio_wr;
-+	}
- 	priv->mii_bus->name = "ltq_mii";
- 	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
- 		priv->pdev->name, priv->pdev->id);
-@@ -416,18 +606,21 @@ static int
- ltq_etop_open(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int i;
-+	unsigned long flags;
- 
--	for (i = 0; i < MAX_DMA_CHAN; i++) {
--		struct ltq_etop_chan *ch = &priv->ch[i];
-+	napi_enable(&priv->txch.napi);
-+	napi_enable(&priv->rxch.napi);
-+
-+	spin_lock_irqsave(&priv->lock, flags);
-+	ltq_dma_open(&priv->txch.dma);
-+	ltq_dma_enable_irq(&priv->txch.dma);
-+	ltq_dma_open(&priv->rxch.dma);
-+	ltq_dma_enable_irq(&priv->rxch.dma);
-+	spin_unlock_irqrestore(&priv->lock, flags);
-+
-+	if (dev->phydev)
-+		phy_start(dev->phydev);
- 
--		if (!IS_TX(i) && (!IS_RX(i)))
--			continue;
--		ltq_dma_open(&ch->dma);
--		ltq_dma_enable_irq(&ch->dma);
--		napi_enable(&ch->napi);
--	}
--	phy_start(dev->phydev);
- 	netif_tx_start_all_queues(dev);
- 	return 0;
- }
-@@ -436,18 +629,19 @@ static int
- ltq_etop_stop(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int i;
-+	unsigned long flags;
- 
- 	netif_tx_stop_all_queues(dev);
--	phy_stop(dev->phydev);
--	for (i = 0; i < MAX_DMA_CHAN; i++) {
--		struct ltq_etop_chan *ch = &priv->ch[i];
--
--		if (!IS_RX(i) && !IS_TX(i))
--			continue;
--		napi_disable(&ch->napi);
--		ltq_dma_close(&ch->dma);
--	}
-+	if (dev->phydev)
-+		phy_stop(dev->phydev);
-+	napi_disable(&priv->txch.napi);
-+	napi_disable(&priv->rxch.napi);
-+
-+	spin_lock_irqsave(&priv->lock, flags);
-+	ltq_dma_close(&priv->txch.dma);
-+	ltq_dma_close(&priv->rxch.dma);
-+	spin_unlock_irqrestore(&priv->lock, flags);
-+
- 	return 0;
- }
- 
-@@ -457,15 +651,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
- 	int queue = skb_get_queue_mapping(skb);
- 	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
--	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
--	int len;
-+	struct ltq_dma_desc *desc =
-+		&priv->txch.dma.desc_base[priv->txch.dma.desc];
- 	unsigned long flags;
- 	u32 byte_offset;
-+	int len;
- 
- 	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- 
--	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
-+	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) ||
-+			priv->txch.skb[priv->txch.dma.desc]) {
- 		netdev_err(dev, "tx ring full\n");
- 		netif_tx_stop_queue(txq);
- 		return NETDEV_TX_BUSY;
-@@ -473,7 +668,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
- 
- 	/* dma needs to start on a 16 byte aligned address */
- 	byte_offset = CPHYSADDR(skb->data) % 16;
--	ch->skb[ch->dma.desc] = skb;
-+	priv->txch.skb[priv->txch.dma.desc] = skb;
- 
- 	netif_trans_update(dev);
- 
-@@ -483,11 +678,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
- 	wmb();
- 	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
- 		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
--	ch->dma.desc++;
--	ch->dma.desc %= LTQ_DESC_NUM;
-+	priv->txch.dma.desc++;
-+	priv->txch.dma.desc %= LTQ_DESC_NUM;
- 	spin_unlock_irqrestore(&priv->lock, flags);
- 
--	if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
-+	if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN)
- 		netif_tx_stop_queue(txq);
- 
- 	return NETDEV_TX_OK;
-@@ -498,11 +693,14 @@ ltq_etop_change_mtu(struct net_device *d
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
- 	unsigned long flags;
-+	int max;
- 
- 	dev->mtu = new_mtu;
- 
-+	max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
-+
- 	spin_lock_irqsave(&priv->lock, flags);
--	ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu, LTQ_ETOP_IGPLEN);
-+	ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max, LTQ_ETOP_IGPLEN);
- 	spin_unlock_irqrestore(&priv->lock, flags);
- 
- 	return 0;
-@@ -555,6 +753,9 @@ ltq_etop_init(struct net_device *dev)
- 	if (err)
- 		goto err_hw;
- 	ltq_etop_change_mtu(dev, 1500);
-+	err = ltq_etop_dma_init(dev);
-+	if (err)
-+		goto err_hw;
- 
- 	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
- 	if (!is_valid_ether_addr(mac.sa_data)) {
-@@ -572,9 +773,10 @@ ltq_etop_init(struct net_device *dev)
- 		dev->addr_assign_type = NET_ADDR_RANDOM;
- 
- 	ltq_etop_set_multicast_list(dev);
--	err = ltq_etop_mdio_init(dev);
--	if (err)
--		goto err_netdev;
-+	if (!ltq_etop_mdio_init(dev))
-+		dev->ethtool_ops = &ltq_etop_ethtool_ops;
-+	else
-+		pr_warn("etop: mdio probe failed\n");;
- 	return 0;
- 
- err_netdev:
-@@ -594,6 +796,9 @@ ltq_etop_tx_timeout(struct net_device *d
- 	err = ltq_etop_hw_init(dev);
- 	if (err)
- 		goto err_hw;
-+	err = ltq_etop_dma_init(dev);
-+	if (err)
-+		goto err_hw;
- 	netif_trans_update(dev);
- 	netif_wake_queue(dev);
- 	return;
-@@ -617,14 +822,18 @@ static const struct net_device_ops ltq_e
- 	.ndo_tx_timeout = ltq_etop_tx_timeout,
- };
- 
--static int __init
--ltq_etop_probe(struct platform_device *pdev)
-+static int ltq_etop_probe(struct platform_device *pdev)
- {
- 	struct net_device *dev;
- 	struct ltq_etop_priv *priv;
--	struct resource *res;
-+	struct resource *res, *gbit_res, irqres[2];
- 	int err;
--	int i;
-+
-+	err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2);
-+	if (err != 2) {
-+		dev_err(&pdev->dev, "failed to get etop irqs\n");
-+		return -EINVAL;
-+	}
- 
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	if (!res) {
-@@ -650,31 +859,62 @@ ltq_etop_probe(struct platform_device *p
- 		goto err_out;
- 	}
- 
--	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
--	if (!dev) {
--		err = -ENOMEM;
--		goto err_out;
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+		if (!gbit_res) {
-+			dev_err(&pdev->dev, "failed to get gbit resource\n");
-+			err = -ENOENT;
-+			goto err_out;
-+		}
-+		ltq_gbit_membase = devm_ioremap(&pdev->dev,
-+			gbit_res->start, resource_size(gbit_res));
-+		if (!ltq_gbit_membase) {
-+			dev_err(&pdev->dev, "failed to remap gigabit switch %d\n",
-+				pdev->id);
-+			err = -ENOMEM;
-+			goto err_out;
-+		}
- 	}
-+
-+	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
- 	strcpy(dev->name, "eth%d");
- 	dev->netdev_ops = &ltq_eth_netdev_ops;
--	dev->ethtool_ops = &ltq_etop_ethtool_ops;
- 	priv = netdev_priv(dev);
- 	priv->res = res;
- 	priv->pdev = pdev;
--	priv->pldata = dev_get_platdata(&pdev->dev);
- 	priv->netdev = dev;
-+	priv->tx_irq = irqres[0].start;
-+	priv->rx_irq = irqres[1].start;
-+	err = of_get_phy_mode(pdev->dev.of_node, &priv->mii_mode);
-+	if (err)
-+		pr_err("Can't find phy-mode for port\n");
-+
-+	of_get_mac_address(pdev->dev.of_node, priv->mac);
-+
-+	priv->clk_ppe = clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(priv->clk_ppe))
-+		return PTR_ERR(priv->clk_ppe);
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		priv->clk_switch = clk_get(&pdev->dev, "switch");
-+		if (IS_ERR(priv->clk_switch))
-+			return PTR_ERR(priv->clk_switch);
-+	}
-+	if (of_machine_is_compatible("lantiq,ase")) {
-+		priv->clk_ephy = clk_get(&pdev->dev, "ephy");
-+		if (IS_ERR(priv->clk_ephy))
-+			return PTR_ERR(priv->clk_ephy);
-+		priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu");
-+		if (IS_ERR(priv->clk_ephycgu))
-+			return PTR_ERR(priv->clk_ephycgu);
-+	}
-+
- 	spin_lock_init(&priv->lock);
- 	SET_NETDEV_DEV(dev, &pdev->dev);
- 
--	for (i = 0; i < MAX_DMA_CHAN; i++) {
--		if (IS_TX(i))
--			netif_napi_add(dev, &priv->ch[i].napi,
--				ltq_etop_poll_tx, 8);
--		else if (IS_RX(i))
--			netif_napi_add(dev, &priv->ch[i].napi,
--				ltq_etop_poll_rx, 32);
--		priv->ch[i].netdev = dev;
--	}
-+	netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
-+	netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
-+	priv->txch.netdev = dev;
-+	priv->rxch.netdev = dev;
- 
- 	err = register_netdev(dev);
- 	if (err)
-@@ -703,31 +943,22 @@ ltq_etop_remove(struct platform_device *
- 	return 0;
- }
- 
-+static const struct of_device_id ltq_etop_match[] = {
-+	{ .compatible = "lantiq,etop-xway" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_etop_match);
-+
- static struct platform_driver ltq_mii_driver = {
-+	.probe = ltq_etop_probe,
- 	.remove = ltq_etop_remove,
- 	.driver = {
- 		.name = "ltq_etop",
-+		.of_match_table = ltq_etop_match,
- 	},
- };
- 
--int __init
--init_ltq_etop(void)
--{
--	int ret = platform_driver_probe(&ltq_mii_driver, ltq_etop_probe);
--
--	if (ret)
--		pr_err("ltq_etop: Error registering platform driver!");
--	return ret;
--}
--
--static void __exit
--exit_ltq_etop(void)
--{
--	platform_driver_unregister(&ltq_mii_driver);
--}
--
--module_init(init_ltq_etop);
--module_exit(exit_ltq_etop);
-+module_platform_driver(ltq_mii_driver);
- 
- MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
- MODULE_DESCRIPTION("Lantiq SoC ETOP");
diff --git a/target/linux/lantiq/patches-5.10/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-5.10/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
deleted file mode 100644
index 154cf226c139..000000000000
--- a/target/linux/lantiq/patches-5.10/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
+++ /dev/null
@@ -1,1034 +0,0 @@
-From f17e50f67fa3c77624edf2ca03fae0d50f0ce39b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 7 Aug 2014 18:26:42 +0200
-Subject: [PATCH 31/36] I2C: MIPS: lantiq: add FALC-ON i2c bus master
-
-This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/i2c/busses/Kconfig      |   10 +
- drivers/i2c/busses/Makefile     |    1 +
- drivers/i2c/busses/i2c-lantiq.c |  747 +++++++++++++++++++++++++++++++++++++++
- drivers/i2c/busses/i2c-lantiq.h |  234 ++++++++++++
- 4 files changed, 992 insertions(+)
- create mode 100644 drivers/i2c/busses/i2c-lantiq.c
- create mode 100644 drivers/i2c/busses/i2c-lantiq.h
-
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -753,6 +753,16 @@ config I2C_MESON
- 	  If you say yes to this option, support will be included for the
- 	  I2C interface on the Amlogic Meson family of SoCs.
- 
-+config I2C_LANTIQ
-+	tristate "Lantiq I2C interface"
-+	depends on LANTIQ && SOC_FALCON
-+	help
-+	  If you say yes to this option, support will be included for the
-+	  Lantiq I2C core.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called i2c-lantiq.
-+
- config I2C_MPC
- 	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
- 	depends on PPC
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -72,6 +72,7 @@ obj-$(CONFIG_I2C_IMX_LPI2C)	+= i2c-imx-l
- obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
- obj-$(CONFIG_I2C_JZ4780)	+= i2c-jz4780.o
- obj-$(CONFIG_I2C_KEMPLD)	+= i2c-kempld.o
-+obj-$(CONFIG_I2C_LANTIQ)	+= i2c-lantiq.o
- obj-$(CONFIG_I2C_LPC2K)		+= i2c-lpc2k.o
- obj-$(CONFIG_I2C_MESON)		+= i2c-meson.o
- obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-lantiq.c
-@@ -0,0 +1,747 @@
-+
-+/*
-+ * Lantiq I2C bus adapter
-+ *
-+ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h> /* for kzalloc, kfree */
-+#include <linux/i2c.h>
-+#include <linux/errno.h>
-+#include <linux/completion.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/of_irq.h>
-+
-+#include <lantiq_soc.h>
-+#include "i2c-lantiq.h"
-+
-+/*
-+ * CURRENT ISSUES:
-+ * - no high speed support
-+ * - ten bit mode is not tested (no slave devices)
-+ */
-+
-+/* access macros */
-+#define i2c_r32(reg)	\
-+	__raw_readl(&(priv->membase)->reg)
-+#define i2c_w32(val, reg)	\
-+	__raw_writel(val, &(priv->membase)->reg)
-+#define i2c_w32_mask(clear, set, reg)	\
-+	i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg)
-+
-+#define DRV_NAME "i2c-lantiq"
-+#define DRV_VERSION "1.00"
-+
-+#define LTQ_I2C_BUSY_TIMEOUT		20 /* ms */
-+
-+#ifdef DEBUG
-+#define LTQ_I2C_XFER_TIMEOUT		(25*HZ)
-+#else
-+#define LTQ_I2C_XFER_TIMEOUT		HZ
-+#endif
-+
-+#define LTQ_I2C_IMSC_DEFAULT_MASK	(I2C_IMSC_I2C_P_INT_EN | \
-+					 I2C_IMSC_I2C_ERR_INT_EN)
-+
-+#define LTQ_I2C_ARB_LOST		(1 << 0)
-+#define LTQ_I2C_NACK			(1 << 1)
-+#define LTQ_I2C_RX_UFL			(1 << 2)
-+#define LTQ_I2C_RX_OFL			(1 << 3)
-+#define LTQ_I2C_TX_UFL			(1 << 4)
-+#define LTQ_I2C_TX_OFL			(1 << 5)
-+
-+struct ltq_i2c {
-+	struct mutex mutex;
-+
-+
-+	/* active clock settings */
-+	unsigned int input_clock;	/* clock input for i2c hardware block */
-+	unsigned int i2c_clock;		/* approximated bus clock in kHz */
-+
-+	struct clk *clk_gate;
-+	struct clk *clk_input;
-+
-+
-+	/* resources (memory and interrupts) */
-+	int irq_lb;				/* last burst irq */
-+
-+	struct lantiq_reg_i2c __iomem *membase;	/* base of mapped registers */
-+
-+	struct i2c_adapter adap;
-+	struct device *dev;
-+
-+	struct completion cmd_complete;
-+
-+
-+	/* message transfer data */
-+	struct i2c_msg *current_msg;	/* current message */
-+	int msgs_num;		/* number of messages to handle */
-+	u8 *msg_buf;		/* current buffer */
-+	u32 msg_buf_len;	/* remaining length of current buffer */
-+	int msg_err;		/* error status of the current transfer */
-+
-+
-+	/* master status codes */
-+	enum {
-+		STATUS_IDLE,
-+		STATUS_ADDR,	/* address phase */
-+		STATUS_WRITE,
-+		STATUS_READ,
-+		STATUS_READ_END,
-+		STATUS_STOP
-+	} status;
-+};
-+
-+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id);
-+
-+static inline void enable_burst_irq(struct ltq_i2c *priv)
-+{
-+	i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
-+}
-+static inline void disable_burst_irq(struct ltq_i2c *priv)
-+{
-+	i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
-+}
-+
-+static void prepare_msg_send_addr(struct ltq_i2c *priv)
-+{
-+	struct i2c_msg *msg = priv->current_msg;
-+	int rd = !!(msg->flags & I2C_M_RD);	/* extends to 0 or 1 */
-+	u16 addr = msg->addr;
-+
-+	/* new i2c_msg */
-+	priv->msg_buf = msg->buf;
-+	priv->msg_buf_len = msg->len;
-+	if (rd)
-+		priv->status = STATUS_READ;
-+	else
-+		priv->status = STATUS_WRITE;
-+
-+	/* send slave address */
-+	if (msg->flags & I2C_M_TEN) {
-+		i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
-+		i2c_w32(addr & 0xff, txd);
-+	} else {
-+		i2c_w32((addr & 0x7f) << 1 | rd, txd);
-+	}
-+}
-+
-+static void ltq_i2c_set_tx_len(struct ltq_i2c *priv)
-+{
-+	struct i2c_msg *msg = priv->current_msg;
-+	int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
-+
-+	pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T');
-+
-+	priv->status = STATUS_ADDR;
-+
-+	if (!(msg->flags & I2C_M_RD))
-+		len += msg->len;
-+	else
-+		/* set maximum received packet size (before rx int!) */
-+		i2c_w32(msg->len, mrps_ctrl);
-+	i2c_w32(len, tps_ctrl);
-+	enable_burst_irq(priv);
-+}
-+
-+static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap)
-+{
-+	struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+	unsigned int input_clock = clk_get_rate(priv->clk_input);
-+	u32 dec, inc = 1;
-+
-+	/* clock changed? */
-+	if (priv->input_clock == input_clock)
-+		return 0;
-+
-+	/*
-+	 * this formula is only an approximation, found by the recommended
-+	 * values in the "I2C Architecture Specification 1.7.1"
-+	 */
-+	dec = input_clock / (priv->i2c_clock * 2);
-+	if (dec <= 6)
-+		return -ENXIO;
-+
-+	i2c_w32(0, fdiv_high_cfg);
-+	i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) |
-+		(dec << I2C_FDIV_CFG_DEC_OFFSET),
-+		fdiv_cfg);
-+
-+	dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n",
-+		input_clock, priv->i2c_clock, dec);
-+
-+	priv->input_clock = input_clock;
-+	return 0;
-+}
-+
-+static int ltq_i2c_hw_init(struct i2c_adapter *adap)
-+{
-+	int ret = 0;
-+	struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+
-+	/* disable bus */
-+	i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-+
-+#ifndef DEBUG
-+	/* set normal operation clock divider */
-+	i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
-+#else
-+	/* for debugging a higher divider value! */
-+	i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
-+#endif
-+
-+	/* setup clock */
-+	ret = ltq_i2c_hw_set_clock(adap);
-+	if (ret != 0) {
-+		dev_warn(priv->dev, "invalid clock settings\n");
-+		return ret;
-+	}
-+
-+	/* configure fifo */
-+	i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
-+		I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
-+		I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
-+		I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
-+		I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
-+		I2C_FIFO_CFG_RXBS_RXBS0,  /* rx fifo burst size is 1 word */
-+		fifo_cfg);
-+
-+	/* configure address */
-+	i2c_w32(I2C_ADDR_CFG_SOPE_EN |	/* generate stop when no more data in
-+					   the fifo */
-+		I2C_ADDR_CFG_SONA_EN |	/* generate stop when NA received */
-+		I2C_ADDR_CFG_MnS_EN |	/* we are master device */
-+		0,			/* our slave address (not used!) */
-+		addr_cfg);
-+
-+	/* enable bus */
-+	i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
-+
-+	return 0;
-+}
-+
-+static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv)
-+{
-+	unsigned long timeout;
-+
-+	timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT);
-+
-+	do {
-+		u32 stat = i2c_r32(bus_stat);
-+
-+		if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE)
-+			return 0;
-+
-+		cond_resched();
-+	} while (!time_after_eq(jiffies, timeout));
-+
-+	dev_err(priv->dev, "timeout waiting for bus ready\n");
-+	return -ETIMEDOUT;
-+}
-+
-+static void ltq_i2c_tx(struct ltq_i2c *priv, int last)
-+{
-+	if (priv->msg_buf_len && priv->msg_buf) {
-+		i2c_w32(*priv->msg_buf, txd);
-+
-+		if (--priv->msg_buf_len)
-+			priv->msg_buf++;
-+		else
-+			priv->msg_buf = NULL;
-+	} else {
-+		last = 1;
-+	}
-+
-+	if (last)
-+		disable_burst_irq(priv);
-+}
-+
-+static void ltq_i2c_rx(struct ltq_i2c *priv, int last)
-+{
-+	u32 fifo_stat, timeout;
-+	if (priv->msg_buf_len && priv->msg_buf) {
-+		timeout = 5000000;
-+		do {
-+			fifo_stat = i2c_r32(ffs_stat);
-+		} while (!fifo_stat && --timeout);
-+		if (!timeout) {
-+			last = 1;
-+			pr_debug("\nrx timeout\n");
-+			goto err;
-+		}
-+		while (fifo_stat) {
-+			*priv->msg_buf = i2c_r32(rxd);
-+			if (--priv->msg_buf_len) {
-+				priv->msg_buf++;
-+			} else {
-+				priv->msg_buf = NULL;
-+				last = 1;
-+				break;
-+			}
-+			/*
-+			 * do not read more than burst size, otherwise no "last
-+			 * burst" is generated and the transaction is blocked!
-+			 */
-+			fifo_stat = 0;
-+		}
-+	} else {
-+		last = 1;
-+	}
-+err:
-+	if (last) {
-+		disable_burst_irq(priv);
-+
-+		if (priv->status == STATUS_READ_END) {
-+			/* 
-+			 * do the STATUS_STOP and complete() here, as sometimes
-+			 * the tx_end is already seen before this is finished
-+			 */
-+			priv->status = STATUS_STOP;
-+			complete(&priv->cmd_complete);
-+		} else {
-+			i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-+			priv->status = STATUS_READ_END;
-+		}
-+	}
-+}
-+
-+static void ltq_i2c_xfer_init(struct ltq_i2c *priv)
-+{
-+	/* enable interrupts */
-+	i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc);
-+
-+	/* trigger transfer of first msg */
-+	ltq_i2c_set_tx_len(priv);
-+}
-+
-+static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
-+{
-+#if defined(DEBUG)
-+	int i, j;
-+	pr_debug("Messages %d %s\n", num, rx ? "out" : "in");
-+	for (i = 0; i < num; i++) {
-+		pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i,
-+			(msgs[i].flags & I2C_M_RD) ? 'R' : 'T',
-+			msgs[i].len, msgs[i].addr);
-+		if (!(msgs[i].flags & I2C_M_RD) || rx) {
-+			for (j = 0; j < msgs[i].len; j++)
-+				pr_debug("%02X ", msgs[i].buf[j]);
-+		}
-+		pr_debug("\n");
-+	}
-+#endif
-+}
-+
-+static void ltq_i2c_release_bus(struct ltq_i2c *priv)
-+{
-+	if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
-+		i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-+}
-+
-+static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
-+			   int num)
-+{
-+	struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+	int ret;
-+
-+	dev_dbg(priv->dev, "xfer %u messages\n", num);
-+	dump_msgs(msgs, num, 0);
-+
-+	mutex_lock(&priv->mutex);
-+
-+	init_completion(&priv->cmd_complete);
-+	priv->current_msg = msgs;
-+	priv->msgs_num = num;
-+	priv->msg_err = 0;
-+	priv->status = STATUS_IDLE;
-+
-+	/* wait for the bus to become ready */
-+	ret = ltq_i2c_wait_bus_not_busy(priv);
-+	if (ret)
-+		goto done;
-+
-+	while (priv->msgs_num) {
-+		/* start the transfers */
-+		ltq_i2c_xfer_init(priv);
-+
-+		/* wait for transfers to complete */
-+		ret = wait_for_completion_interruptible_timeout(
-+			&priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT);
-+		if (ret == 0) {
-+			dev_err(priv->dev, "controller timed out\n");
-+			ltq_i2c_hw_init(adap);
-+			ret = -ETIMEDOUT;
-+			goto done;
-+		} else if (ret < 0)
-+			goto done;
-+
-+		if (priv->msg_err) {
-+			if (priv->msg_err & LTQ_I2C_NACK)
-+				ret = -ENXIO;
-+			else
-+				ret = -EREMOTEIO;
-+			goto done;
-+		}
-+		if (--priv->msgs_num)
-+			priv->current_msg++;
-+	}
-+	/* no error? */
-+	ret = num;
-+
-+done:
-+	ltq_i2c_release_bus(priv);
-+
-+	mutex_unlock(&priv->mutex);
-+
-+	if (ret >= 0)
-+		dump_msgs(msgs, num, 1);
-+
-+	pr_debug("XFER ret %d\n", ret);
-+	return ret;
-+}
-+
-+static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id)
-+{
-+	struct ltq_i2c *priv = dev_id;
-+	struct i2c_msg *msg = priv->current_msg;
-+	int last = (irq == priv->irq_lb);
-+
-+	if (last)
-+		pr_debug("LB ");
-+	else
-+		pr_debug("B ");
-+
-+	if (msg->flags & I2C_M_RD) {
-+		switch (priv->status) {
-+		case STATUS_ADDR:
-+			pr_debug("X");
-+			prepare_msg_send_addr(priv);
-+			disable_burst_irq(priv);
-+			break;
-+		case STATUS_READ:
-+		case STATUS_READ_END:
-+			pr_debug("R");
-+			ltq_i2c_rx(priv, last);
-+			break;
-+		default:
-+			disable_burst_irq(priv);
-+			pr_warn("Status R %d\n", priv->status);
-+			break;
-+		}
-+	} else {
-+		switch (priv->status) {
-+		case STATUS_ADDR:
-+			pr_debug("x");
-+			prepare_msg_send_addr(priv);
-+			break;
-+		case STATUS_WRITE:
-+			pr_debug("w");
-+			ltq_i2c_tx(priv, last);
-+			break;
-+		default:
-+			disable_burst_irq(priv);
-+			pr_warn("Status W %d\n", priv->status);
-+			break;
-+		}
-+	}
-+
-+	i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
-+	return IRQ_HANDLED;
-+}
-+
-+static void ltq_i2c_isr_prot(struct ltq_i2c *priv)
-+{
-+	u32 i_pro = i2c_r32(p_irqss);
-+
-+	pr_debug("i2c-p");
-+
-+	/* not acknowledge */
-+	if (i_pro & I2C_P_IRQSS_NACK) {
-+		priv->msg_err |= LTQ_I2C_NACK;
-+		pr_debug(" nack");
-+	}
-+
-+	/* arbitration lost */
-+	if (i_pro & I2C_P_IRQSS_AL) {
-+		priv->msg_err |= LTQ_I2C_ARB_LOST;
-+		pr_debug(" arb-lost");
-+	}
-+	/* tx -> rx switch */
-+	if (i_pro & I2C_P_IRQSS_RX)
-+		pr_debug(" rx");
-+
-+	/* tx end */
-+	if (i_pro & I2C_P_IRQSS_TX_END)
-+		pr_debug(" txend");
-+	pr_debug("\n");
-+
-+	if (!priv->msg_err) {
-+		/* tx -> rx switch */
-+		if (i_pro & I2C_P_IRQSS_RX) {
-+			priv->status = STATUS_READ;
-+			enable_burst_irq(priv);
-+		}
-+		if (i_pro & I2C_P_IRQSS_TX_END) {
-+			if (priv->status == STATUS_READ)
-+				priv->status = STATUS_READ_END;
-+			else {
-+				disable_burst_irq(priv);
-+				priv->status = STATUS_STOP;
-+			}
-+		}
-+	}
-+
-+	i2c_w32(i_pro, p_irqsc);
-+}
-+
-+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id)
-+{
-+	u32 i_raw, i_err = 0;
-+	struct ltq_i2c *priv = dev_id;
-+
-+	i_raw = i2c_r32(mis);
-+	pr_debug("i_raw 0x%08X\n", i_raw);
-+
-+	/* error interrupt */
-+	if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
-+		i_err = i2c_r32(err_irqss);
-+		pr_debug("i_err 0x%08X bus_stat 0x%04X\n",
-+			i_err, i2c_r32(bus_stat));
-+
-+		/* tx fifo overflow (8) */
-+		if (i_err & I2C_ERR_IRQSS_TXF_OFL)
-+			priv->msg_err |= LTQ_I2C_TX_OFL;
-+
-+		/* tx fifo underflow (4) */
-+		if (i_err & I2C_ERR_IRQSS_TXF_UFL)
-+			priv->msg_err |= LTQ_I2C_TX_UFL;
-+
-+		/* rx fifo overflow (2) */
-+		if (i_err & I2C_ERR_IRQSS_RXF_OFL)
-+			priv->msg_err |= LTQ_I2C_RX_OFL;
-+
-+		/* rx fifo underflow (1) */
-+		if (i_err & I2C_ERR_IRQSS_RXF_UFL)
-+			priv->msg_err |= LTQ_I2C_RX_UFL;
-+
-+		i2c_w32(i_err, err_irqsc);
-+	}
-+
-+	/* protocol interrupt */
-+	if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
-+		ltq_i2c_isr_prot(priv);
-+
-+	if ((priv->msg_err) || (priv->status == STATUS_STOP))
-+		complete(&priv->cmd_complete);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static u32 ltq_i2c_functionality(struct i2c_adapter *adap)
-+{
-+	return	I2C_FUNC_I2C |
-+		I2C_FUNC_10BIT_ADDR |
-+		I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static struct i2c_algorithm ltq_i2c_algorithm = {
-+	.master_xfer	= ltq_i2c_xfer,
-+	.functionality	= ltq_i2c_functionality,
-+};
-+
-+static int ltq_i2c_probe(struct platform_device *pdev)
-+{
-+	struct device_node *node = pdev->dev.of_node;
-+	struct ltq_i2c *priv;
-+	struct i2c_adapter *adap;
-+	struct resource *mmres, irqres[4];
-+	int ret = 0;
-+
-+	dev_dbg(&pdev->dev, "probing\n");
-+
-+	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	ret = of_irq_to_resource_table(node, irqres, 4);
-+	if (!mmres || (ret != 4)) {
-+		dev_err(&pdev->dev, "no resources\n");
-+		return -ENODEV;
-+	}
-+
-+	/* allocate private data */
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv) {
-+		dev_err(&pdev->dev, "can't allocate private data\n");
-+		return -ENOMEM;
-+	}
-+
-+	adap = &priv->adap;
-+	i2c_set_adapdata(adap, priv);
-+	adap->owner = THIS_MODULE;
-+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+	strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
-+	adap->algo = &ltq_i2c_algorithm;
-+	adap->dev.parent = &pdev->dev;
-+	adap->dev.of_node = pdev->dev.of_node;
-+
-+	if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) {
-+		dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n");
-+		priv->i2c_clock = 100000;
-+	}
-+
-+	init_completion(&priv->cmd_complete);
-+	mutex_init(&priv->mutex);
-+
-+	priv->membase = devm_ioremap_resource(&pdev->dev, mmres);
-+	if (IS_ERR(priv->membase))
-+		return PTR_ERR(priv->membase);
-+
-+	priv->dev = &pdev->dev;
-+	priv->irq_lb = irqres[0].start;
-+
-+	ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst,
-+		0x0, "i2c lb", priv);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
-+			irqres[0].start);
-+		return -ENODEV;
-+	}
-+
-+	ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst,
-+		0x0, "i2c b", priv);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't get burst IRQ %d\n",
-+			irqres[1].start);
-+		return -ENODEV;
-+	}
-+
-+	ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr,
-+		0x0, "i2c err", priv);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't get error IRQ %d\n",
-+			irqres[2].start);
-+		return -ENODEV;
-+	}
-+
-+	ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr,
-+		0x0, "i2c p", priv);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
-+			irqres[3].start);
-+		return -ENODEV;
-+	}
-+
-+	dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
-+	dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start,
-+		irqres[1].start, irqres[2].start, irqres[3].start);
-+
-+	priv->clk_gate = devm_clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(priv->clk_gate)) {
-+		dev_err(&pdev->dev, "failed to get i2c clk\n");
-+		return -ENOENT;
-+	}
-+
-+	/* this is a static clock, which has no refcounting */
-+	priv->clk_input = clk_get_fpi();
-+	if (IS_ERR(priv->clk_input)) {
-+		dev_err(&pdev->dev, "failed to get fpi clk\n");
-+		return -ENOENT;
-+	}
-+
-+	clk_activate(priv->clk_gate);
-+
-+	/* add our adapter to the i2c stack */
-+	ret = i2c_add_numbered_adapter(adap);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't register I2C adapter\n");
-+		goto out;
-+	}
-+
-+	platform_set_drvdata(pdev, priv);
-+	i2c_set_adapdata(adap, priv);
-+
-+	/* print module version information */
-+	dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
-+		(i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
-+		(i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
-+
-+	/* initialize HW */
-+	ret = ltq_i2c_hw_init(adap);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't configure adapter\n");
-+		i2c_del_adapter(adap);
-+		platform_set_drvdata(pdev, NULL);
-+		goto out;
-+	} else {
-+		dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
-+	}
-+
-+out:
-+	/* if init failed, we need to deactivate the clock gate */
-+	if (ret)
-+		clk_deactivate(priv->clk_gate);
-+
-+	return ret;
-+}
-+
-+static int ltq_i2c_remove(struct platform_device *pdev)
-+{
-+	struct ltq_i2c *priv = platform_get_drvdata(pdev);
-+
-+	/* disable bus */
-+	i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-+
-+	/* power down the core */
-+	clk_deactivate(priv->clk_gate);
-+
-+	/* remove driver */
-+	i2c_del_adapter(&priv->adap);
-+	kfree(priv);
-+
-+	dev_dbg(&pdev->dev, "removed\n");
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+static const struct of_device_id ltq_i2c_match[] = {
-+	{ .compatible = "lantiq,lantiq-i2c" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_i2c_match);
-+
-+static struct platform_driver ltq_i2c_driver = {
-+	.probe	= ltq_i2c_probe,
-+	.remove	= ltq_i2c_remove,
-+	.driver	= {
-+		.name	= DRV_NAME,
-+		.owner	= THIS_MODULE,
-+		.of_match_table = ltq_i2c_match,
-+	},
-+};
-+
-+module_platform_driver(ltq_i2c_driver);
-+
-+MODULE_DESCRIPTION("Lantiq I2C bus adapter");
-+MODULE_AUTHOR("Thomas Langer <thomas.langer@lantiq.com>");
-+MODULE_ALIAS("platform:" DRV_NAME);
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-lantiq.h
-@@ -0,0 +1,234 @@
-+#ifndef I2C_LANTIQ_H
-+#define I2C_LANTIQ_H
-+
-+/* I2C register structure */
-+struct lantiq_reg_i2c {
-+	/* I2C Kernel Clock Control Register */
-+	unsigned int clc; /* 0x00000000 */
-+	/* Reserved */
-+	unsigned int res_0; /* 0x00000004 */
-+	/* I2C Identification Register */
-+	unsigned int id; /* 0x00000008 */
-+	/* Reserved */
-+	unsigned int res_1; /* 0x0000000C */
-+	/*
-+	 * I2C RUN Control Register
-+	 * This register enables and disables the I2C peripheral. Before
-+	 * enabling, the I2C has to be configured properly. After enabling
-+	 * no configuration is possible
-+	 */
-+	unsigned int run_ctrl; /* 0x00000010 */
-+	/*
-+	 * I2C End Data Control Register
-+	 * This register is used to either turn around the data transmission
-+	 * direction or to address another slave without sending a stop
-+	 * condition. Also the software can stop the slave-transmitter by
-+	 * sending a not-accolade when working as master-receiver or even
-+	 * stop data transmission immediately when operating as
-+	 * master-transmitter. The writing to the bits of this control
-+	 * register is only effective when in MASTER RECEIVES BYTES, MASTER
-+	 * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
-+	 */
-+	unsigned int endd_ctrl; /* 0x00000014 */
-+	/*
-+	 * I2C Fractional Divider Configuration Register
-+	 * These register is used to program the fractional divider of the I2C
-+	 * bus. Before the peripheral is switched on by setting the RUN-bit the
-+	 * two (fixed) values for the two operating frequencies are programmed
-+	 * into these (configuration) registers. The Register FDIV_HIGH_CFG has
-+	 * the same layout as I2C_FDIV_CFG.
-+	 */
-+	unsigned int fdiv_cfg; /* 0x00000018 */
-+	/*
-+	 * I2C Fractional Divider (highspeed mode) Configuration Register
-+	 * These register is used to program the fractional divider of the I2C
-+	 * bus. Before the peripheral is switched on by setting the RUN-bit the
-+	 * two (fixed) values for the two operating frequencies are programmed
-+	 * into these (configuration) registers. The Register FDIV_CFG has the
-+	 * same layout as I2C_FDIV_CFG.
-+	 */
-+	unsigned int fdiv_high_cfg; /* 0x0000001C */
-+	/* I2C Address Configuration Register */
-+	unsigned int addr_cfg; /* 0x00000020 */
-+	/* I2C Bus Status Register
-+	 * This register gives a status information of the I2C. This additional
-+	 * information can be used by the software to start proper actions.
-+	 */
-+	unsigned int bus_stat; /* 0x00000024 */
-+	/* I2C FIFO Configuration Register */
-+	unsigned int fifo_cfg; /* 0x00000028 */
-+	/* I2C Maximum Received Packet Size Register */
-+	unsigned int mrps_ctrl; /* 0x0000002C */
-+	/* I2C Received Packet Size Status Register */
-+	unsigned int rps_stat; /* 0x00000030 */
-+	/* I2C Transmit Packet Size Register */
-+	unsigned int tps_ctrl; /* 0x00000034 */
-+	/* I2C Filled FIFO Stages Status Register */
-+	unsigned int ffs_stat; /* 0x00000038 */
-+	/* Reserved */
-+	unsigned int res_2; /* 0x0000003C */
-+	/* I2C Timing Configuration Register */
-+	unsigned int tim_cfg; /* 0x00000040 */
-+	/* Reserved */
-+	unsigned int res_3[7]; /* 0x00000044 */
-+	/* I2C Error Interrupt Request Source Mask Register */
-+	unsigned int err_irqsm; /* 0x00000060 */
-+	/* I2C Error Interrupt Request Source Status Register */
-+	unsigned int err_irqss; /* 0x00000064 */
-+	/* I2C Error Interrupt Request Source Clear Register */
-+	unsigned int err_irqsc; /* 0x00000068 */
-+	/* Reserved */
-+	unsigned int res_4; /* 0x0000006C */
-+	/* I2C Protocol Interrupt Request Source Mask Register */
-+	unsigned int p_irqsm; /* 0x00000070 */
-+	/* I2C Protocol Interrupt Request Source Status Register */
-+	unsigned int p_irqss; /* 0x00000074 */
-+	/* I2C Protocol Interrupt Request Source Clear Register */
-+	unsigned int p_irqsc; /* 0x00000078 */
-+	/* Reserved */
-+	unsigned int res_5; /* 0x0000007C */
-+	/* I2C Raw Interrupt Status Register */
-+	unsigned int ris; /* 0x00000080 */
-+	/* I2C Interrupt Mask Control Register */
-+	unsigned int imsc; /* 0x00000084 */
-+	/* I2C Masked Interrupt Status Register */
-+	unsigned int mis; /* 0x00000088 */
-+	/* I2C Interrupt Clear Register */
-+	unsigned int icr; /* 0x0000008C */
-+	/* I2C Interrupt Set Register */
-+	unsigned int isr; /* 0x00000090 */
-+	/* I2C DMA Enable Register */
-+	unsigned int dmae; /* 0x00000094 */
-+	/* Reserved */
-+	unsigned int res_6[8154]; /* 0x00000098 */
-+	/* I2C Transmit Data Register */
-+	unsigned int txd; /* 0x00008000 */
-+	/* Reserved */
-+	unsigned int res_7[4095]; /* 0x00008004 */
-+	/* I2C Receive Data Register */
-+	unsigned int rxd; /* 0x0000C000 */
-+	/* Reserved */
-+	unsigned int res_8[4095]; /* 0x0000C004 */
-+};
-+
-+/*
-+ * Clock Divider for Normal Run Mode
-+ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long
-+ * as the new divider value RMC is not valid, the register returns 0x0000 00xx
-+ * on reading.
-+ */
-+#define I2C_CLC_RMC_MASK 0x0000FF00
-+/* field offset */
-+#define I2C_CLC_RMC_OFFSET 8
-+
-+/* Fields of "I2C Identification Register" */
-+/* Module ID */
-+#define I2C_ID_ID_MASK 0x0000FF00
-+/* field offset */
-+#define I2C_ID_ID_OFFSET 8
-+/* Revision */
-+#define I2C_ID_REV_MASK 0x000000FF
-+/* field offset */
-+#define I2C_ID_REV_OFFSET 0
-+
-+/* Fields of "I2C Interrupt Mask Control Register" */
-+/* Enable */
-+#define I2C_IMSC_BREQ_INT_EN 0x00000008
-+/* Enable */
-+#define I2C_IMSC_LBREQ_INT_EN 0x00000004
-+
-+/* Fields of "I2C Fractional Divider Configuration Register" */
-+/* field offset */
-+#define I2C_FDIV_CFG_INC_OFFSET 16
-+
-+/* Fields of "I2C Interrupt Mask Control Register" */
-+/* Enable */
-+#define I2C_IMSC_I2C_P_INT_EN 0x00000020
-+/* Enable */
-+#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
-+
-+/* Fields of "I2C Error Interrupt Request Source Status Register" */
-+/* TXF_OFL */
-+#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
-+/* TXF_UFL */
-+#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
-+/* RXF_OFL */
-+#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
-+/* RXF_UFL */
-+#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
-+
-+/* Fields of "I2C Raw Interrupt Status Register" */
-+/* Read: Interrupt occurred. */
-+#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
-+/* Read: Interrupt occurred. */
-+#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
-+
-+/* Fields of "I2C FIFO Configuration Register" */
-+/* TX FIFO Flow Control */
-+#define I2C_FIFO_CFG_TXFC 0x00020000
-+/* RX FIFO Flow Control */
-+#define I2C_FIFO_CFG_RXFC 0x00010000
-+/* Word aligned (character alignment of four characters) */
-+#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
-+/* Word aligned (character alignment of four characters) */
-+#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
-+/* 1 word */
-+#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
-+
-+/* Fields of "I2C FIFO Configuration Register" */
-+/* 1 word */
-+#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
-+/* Stop on Packet End Enable */
-+#define I2C_ADDR_CFG_SOPE_EN 0x00200000
-+/* Stop on Not Acknowledge Enable */
-+#define I2C_ADDR_CFG_SONA_EN 0x00100000
-+/* Enable */
-+#define I2C_ADDR_CFG_MnS_EN 0x00080000
-+
-+/* Fields of "I2C Interrupt Clear Register" */
-+/* Clear */
-+#define I2C_ICR_BREQ_INT_CLR 0x00000008
-+/* Clear */
-+#define I2C_ICR_LBREQ_INT_CLR 0x00000004
-+
-+/* Fields of "I2C Fractional Divider Configuration Register" */
-+/* field offset */
-+#define I2C_FDIV_CFG_DEC_OFFSET 0
-+
-+/* Fields of "I2C Bus Status Register" */
-+/* Bus Status */
-+#define I2C_BUS_STAT_BS_MASK 0x00000003
-+/* Read from I2C Bus. */
-+#define I2C_BUS_STAT_RNW_READ 0x00000004
-+/* I2C Bus is free. */
-+#define I2C_BUS_STAT_BS_FREE 0x00000000
-+/*
-+ * The device is working as master and has claimed the control on the
-+ * I2C-bus (busy master).
-+ */
-+#define I2C_BUS_STAT_BS_BM 0x00000002
-+
-+/* Fields of "I2C RUN Control Register" */
-+/* Enable */
-+#define I2C_RUN_CTRL_RUN_EN 0x00000001
-+
-+/* Fields of "I2C End Data Control Register" */
-+/*
-+ * Set End of Transmission
-+ * Note:Do not write '1' to this bit when bus is free. This will cause an
-+ * abort after the first byte when a new transfer is started.
-+ */
-+#define I2C_ENDD_CTRL_SETEND 0x00000002
-+
-+/* Fields of "I2C Protocol Interrupt Request Source Status Register" */
-+/* NACK */
-+#define I2C_P_IRQSS_NACK 0x00000010
-+/* AL */
-+#define I2C_P_IRQSS_AL 0x00000008
-+/* RX */
-+#define I2C_P_IRQSS_RX 0x00000040
-+/* TX_END */
-+#define I2C_P_IRQSS_TX_END 0x00000020
-+
-+
-+#endif /* I2C_LANTIQ_H */
diff --git a/target/linux/lantiq/patches-5.10/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-5.10/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
deleted file mode 100644
index c80045e87814..000000000000
--- a/target/linux/lantiq/patches-5.10/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
+++ /dev/null
@@ -1,218 +0,0 @@
-From f8c5db89e793a4bc6c1e87bd7b3a5cec16b75bc3 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 10 Sep 2014 22:42:14 +0200
-Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |   3 +
- arch/mips/lantiq/xway/Makefile                     |   3 +
- arch/mips/lantiq/xway/ath5k_eep.c                  | 136 +++++++++++++++++++++
- arch/mips/lantiq/xway/eth_mac.c                    |  25 ++++
- drivers/net/ethernet/lantiq_etop.c                 |   6 +-
- 5 files changed, 172 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/lantiq/xway/ath5k_eep.c
- create mode 100644 arch/mips/lantiq/xway/eth_mac.c
-
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -102,5 +102,8 @@ int xrx200_gphy_boot(struct device *dev,
- extern void ltq_pmu_enable(unsigned int module);
- extern void ltq_pmu_disable(unsigned int module);
- 
-+/* allow the ethernet driver to load a flash mapped mac addr */
-+const u8* ltq_get_eth_mac(void);
-+
- #endif /* CONFIG_SOC_TYPE_XWAY */
- #endif /* _LTQ_XWAY_H__ */
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -8,3 +8,6 @@ obj-y += timer.o
- endif
- 
- obj-y += vmmc.o
-+
-+obj-y += eth_mac.o
-+obj-$(CONFIG_PCI) += ath5k_eep.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/ath5k_eep.c
-@@ -0,0 +1,136 @@
-+/*
-+ *  Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
-+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ *  Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
-+ *  Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com>
-+ *  Copyright (C) 2013 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *  Copyright (C) 2015 Vittorio Gambaletta <openwrt@vittgam.net>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ath5k_platform.h>
-+#include <linux/pci.h>
-+#include <linux/err.h>
-+#include <linux/mtd/mtd.h>
-+#include <lantiq_soc.h>
-+
-+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
-+struct ath5k_platform_data ath5k_pdata;
-+static u8 athxk_eeprom_mac[6];
-+
-+static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+	dev->dev.platform_data = &ath5k_pdata;
-+	return 0;
-+}
-+
-+static int ath5k_eep_load;
-+int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node, *mtd_np = NULL;
-+	int mac_offset;
-+	u32 mac_inc = 0;
-+	int i;
-+	struct mtd_info *the_mtd;
-+	size_t flash_readlen;
-+	const __be32 *list;
-+	const char *part;
-+	phandle phandle;
-+
-+	list = of_get_property(np, "ath,eep-flash", &i);
-+	if (!list || (i != (2 * sizeof(*list))))
-+		return -ENODEV;
-+
-+	phandle = be32_to_cpup(list++);
-+	if (phandle)
-+		mtd_np = of_find_node_by_phandle(phandle);
-+
-+	if (!mtd_np)
-+		return -ENODEV;
-+
-+	part = of_get_property(mtd_np, "label", NULL);
-+	if (!part)
-+		part = mtd_np->name;
-+
-+	the_mtd = get_mtd_device_nm(part);
-+	if (IS_ERR(the_mtd))
-+		return -ENODEV;
-+
-+	ath5k_pdata.eeprom_data = kmalloc(ATH5K_PLAT_EEP_MAX_WORDS<<1, GFP_KERNEL);
-+
-+	i = mtd_read(the_mtd, be32_to_cpup(list), ATH5K_PLAT_EEP_MAX_WORDS << 1,
-+		&flash_readlen, (void *) ath5k_pdata.eeprom_data);
-+
-+	if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
-+		size_t mac_readlen;
-+		mtd_read(the_mtd, mac_offset, 6, &mac_readlen,
-+			(void *) athxk_eeprom_mac);
-+	}
-+	put_mtd_device(the_mtd);
-+
-+	if (((ATH5K_PLAT_EEP_MAX_WORDS<<1) != flash_readlen) || i) {
-+		dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+		return -ENODEV;
-+	}
-+
-+	if (of_find_property(np, "ath,eep-swap", NULL))
-+		for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++)
-+			ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]);
-+
-+	if (!is_valid_ether_addr(athxk_eeprom_mac) && ltq_get_eth_mac())
-+		ether_addr_copy(athxk_eeprom_mac, ltq_get_eth_mac());
-+
-+	if (!is_valid_ether_addr(athxk_eeprom_mac)) {
-+		dev_warn(&pdev->dev, "using random mac\n");
-+		random_ether_addr(athxk_eeprom_mac);
-+	}
-+
-+	if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
-+		athxk_eeprom_mac[5] += mac_inc;
-+
-+	ath5k_pdata.macaddr = athxk_eeprom_mac;
-+	ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
-+
-+	dev_info(&pdev->dev, "loaded ath5k eeprom\n");
-+
-+	return 0;
-+}
-+
-+static struct of_device_id ath5k_eeprom_ids[] = {
-+	{ .compatible = "ath5k,eeprom" },
-+	{ }
-+};
-+
-+static struct platform_driver ath5k_eeprom_driver = {
-+	.driver		= {
-+		.name		= "ath5k,eeprom",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(ath5k_eeprom_ids),
-+	},
-+};
-+
-+static int __init of_ath5k_eeprom_init(void)
-+{
-+	int ret = platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
-+
-+	if (ret)
-+		ath5k_eep_load = 1;
-+
-+	return ret;
-+}
-+
-+static int __init of_ath5k_eeprom_init_late(void)
-+{
-+	if (!ath5k_eep_load)
-+		return 0;
-+
-+	return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
-+}
-+late_initcall(of_ath5k_eeprom_init_late);
-+subsys_initcall(of_ath5k_eeprom_init);
---- /dev/null
-+++ b/arch/mips/lantiq/xway/eth_mac.c
-@@ -0,0 +1,25 @@
-+/*
-+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/if_ether.h>
-+
-+static u8 eth_mac[6];
-+static int eth_mac_set;
-+
-+const u8* ltq_get_eth_mac(void)
-+{
-+	return eth_mac;
-+}
-+
-+static int __init setup_ethaddr(char *str)
-+{
-+	eth_mac_set = mac_pton(str, eth_mac);
-+	return !eth_mac_set;
-+}
-+early_param("ethaddr", setup_ethaddr);
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -757,7 +757,11 @@ ltq_etop_init(struct net_device *dev)
- 	if (err)
- 		goto err_hw;
- 
--	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
-+	memcpy(&mac.sa_data, ltq_get_eth_mac(), ETH_ALEN);
-+
-+	if (priv->mac && !is_valid_ether_addr(mac.sa_data))
-+		memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
-+
- 	if (!is_valid_ether_addr(mac.sa_data)) {
- 		pr_warn("etop: invalid MAC, using random\n");
- 		eth_random_addr(mac.sa_data);
diff --git a/target/linux/lantiq/patches-5.10/0042-arch-mips-increase-io_space_limit.patch b/target/linux/lantiq/patches-5.10/0042-arch-mips-increase-io_space_limit.patch
deleted file mode 100644
index c81222af578b..000000000000
--- a/target/linux/lantiq/patches-5.10/0042-arch-mips-increase-io_space_limit.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 9807eb80a1b3bad7a4a89aa6566497bb1cadd6ef Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 3 Jun 2016 13:12:20 +0200
-Subject: [PATCH] arch: mips: increase io_space_limit
-
-this value comes from x86 and breaks some pci devices
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/include/asm/mach-lantiq/spaces.h | 8 ++++++++
- 1 file changed, 8 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-lantiq/spaces.h
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/spaces.h
-@@ -0,0 +1,8 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+#ifndef __ASM_MACH_LANTIQ_SPACES_H_
-+#define __ASM_MACH_LANTIQ_SPACES_H_
-+
-+#define IO_SPACE_LIMIT  0xffffffff
-+
-+#include <asm/mach-generic/spaces.h>
-+#endif
diff --git a/target/linux/lantiq/patches-5.10/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch b/target/linux/lantiq/patches-5.10/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
deleted file mode 100644
index 333a2e6377d5..000000000000
--- a/target/linux/lantiq/patches-5.10/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 6 Jan 2017 17:55:24 +0100
-Subject: [PATCH 2/2] usb: dwc2:  add support for other Lantiq SoCs
-
-The size of the internal RAM of the DesignWare USB controller changed
-between the different Lantiq SoCs. We have the following sizes:
-
-Amazon + Danube: 8 KByte
-Amazon SE + arx100: 2 KByte
-xrx200 + xrx300: 2.5 KByte
-
-For Danube SoC we do not provide the params and let the driver decide
-to use sane defaults, for the Amazon SE and arx100 we use small fifos
-and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo.
-The auto detection of max_transfer_size and max_packet_count should
-work, so remove it.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++-------
- 1 file changed, 39 insertions(+), 7 deletions(-)
-
---- a/drivers/usb/dwc2/params.c
-+++ b/drivers/usb/dwc2/params.c
-@@ -92,7 +92,14 @@ static void dwc2_set_rk_params(struct dw
- 	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
- }
- 
--static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg)
-+static void dwc2_set_ltq_danube_params(struct dwc2_hsotg *hsotg)
-+{
-+	struct dwc2_core_params *p = &hsotg->params;
-+
-+	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
-+}
-+
-+static void dwc2_set_ltq_ase_params(struct dwc2_hsotg *hsotg)
- {
- 	struct dwc2_core_params *p = &hsotg->params;
- 
-@@ -100,12 +107,20 @@ static void dwc2_set_ltq_params(struct d
- 	p->host_rx_fifo_size = 288;
- 	p->host_nperio_tx_fifo_size = 128;
- 	p->host_perio_tx_fifo_size = 96;
--	p->max_transfer_size = 65535;
--	p->max_packet_count = 511;
- 	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
- 		GAHBCFG_HBSTLEN_SHIFT;
- }
- 
-+static void dwc2_set_ltq_xrx200_params(struct dwc2_hsotg *hsotg)
-+{
-+	struct dwc2_core_params *p = &hsotg->params;
-+
-+	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
-+	p->host_rx_fifo_size = 288;
-+	p->host_nperio_tx_fifo_size = 128;
-+	p->host_perio_tx_fifo_size = 136;
-+}
-+
- static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg)
- {
- 	struct dwc2_core_params *p = &hsotg->params;
-@@ -196,8 +211,11 @@ const struct of_device_id dwc2_of_match_
- 	{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
- 	{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params  },
- 	{ .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params },
--	{ .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params },
--	{ .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params },
-+	{ .compatible = "lantiq,danube-usb", .data = &dwc2_set_ltq_danube_params },
-+	{ .compatible = "lantiq,ase-usb", .data = &dwc2_set_ltq_ase_params },
-+	{ .compatible = "lantiq,arx100-usb", .data = &dwc2_set_ltq_ase_params },
-+	{ .compatible = "lantiq,xrx200-usb", .data = &dwc2_set_ltq_xrx200_params },
-+	{ .compatible = "lantiq,xrx300-usb", .data = &dwc2_set_ltq_xrx200_params },
- 	{ .compatible = "snps,dwc2" },
- 	{ .compatible = "samsung,s3c6400-hsotg",
- 	  .data = dwc2_set_s3c6400_params },
diff --git a/target/linux/lantiq/patches-5.10/0051-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-5.10/0051-MIPS-lantiq-improve-USB-initialization.patch
deleted file mode 100644
index 9d62892b566b..000000000000
--- a/target/linux/lantiq/patches-5.10/0051-MIPS-lantiq-improve-USB-initialization.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 6 Jan 2017 17:40:12 +0100
-Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization
-
-This adds code to initialize the USB controller and PHY also on Danube,
-Amazon SE and AR10. This code is based on the Vendor driver from
-different UGW versions and compared to the hardware documentation.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/lantiq/xway/sysctrl.c |  20 +++++++
- 2 files changed, 110 insertions(+), 30 deletions(-)
-
-
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -248,6 +248,25 @@ static void pmu_disable(struct clk *clk)
- 		pr_warn("deactivating PMU module failed!");
- }
- 
-+static void usb_set_clock(void)
-+{
-+	unsigned int val = ltq_cgu_r32(ifccr);
-+
-+	if (of_machine_is_compatible("lantiq,ar10") ||
-+	    of_machine_is_compatible("lantiq,grx390")) {
-+		val &= ~0x03; /* XTAL divided by 3 */
-+	} else if (of_machine_is_compatible("lantiq,ar9") ||
-+		   of_machine_is_compatible("lantiq,vr9")) {
-+		/* TODO: this depends on the XTAL frequency */
-+		val |= 0x03; /* XTAL divided by 3 */
-+	} else if (of_machine_is_compatible("lantiq,ase")) {
-+		val |= 0x20; /* from XTAL */
-+	} else if (of_machine_is_compatible("lantiq,danube")) {
-+		val |= 0x30; /* 12 MHz, generated from 36 MHz */
-+	}
-+	ltq_cgu_w32(val, ifccr);
-+}
-+
- /* the pci enable helper */
- static int pci_enable(struct clk *clk)
- {
-@@ -585,4 +604,5 @@ void __init ltq_soc_init(void)
- 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
- 		clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
- 	}
-+	usb_set_clock();
- }
diff --git a/target/linux/lantiq/patches-5.10/0101-find_active_root.patch b/target/linux/lantiq/patches-5.10/0101-find_active_root.patch
deleted file mode 100644
index 925ac9dbbace..000000000000
--- a/target/linux/lantiq/patches-5.10/0101-find_active_root.patch
+++ /dev/null
@@ -1,93 +0,0 @@
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -38,6 +38,38 @@ static bool node_has_compatible(struct d
- 	return of_get_property(pp, "compatible", NULL);
- }
- 
-+static uint8_t * brnboot_get_selected_root_part(struct mtd_info *master,
-+						loff_t offset)
-+{
-+	static uint8_t root_id;
-+	int err, len;
-+
-+	err = mtd_read(master, offset, 0x01, &len, &root_id);
-+
-+	if (mtd_is_bitflip(err) || !err)
-+		return &root_id;
-+
-+	return NULL;
-+}
-+
-+static void brnboot_set_active_root_part(struct mtd_partition *pparts,
-+					 struct device_node **part_nodes,
-+					 int nr_parts,
-+					 uint8_t *root_id)
-+{
-+	int i;
-+
-+	for (i = 0; i < nr_parts; i++) {
-+		int part_root_id;
-+
-+		if (!of_property_read_u32(part_nodes[i], "brnboot,root-id", &part_root_id)
-+		    && part_root_id == *root_id) {
-+			pparts[i].name = "firmware";
-+			break;
-+		}
-+	}
-+}
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- 				  const struct mtd_partition **pparts,
- 				  struct mtd_part_parser_data *data)
-@@ -51,6 +83,8 @@ static int parse_fixed_partitions(struct
- 	struct device_node *pp;
- 	int nr_parts, i, ret = 0;
- 	bool dedicated = true;
-+	uint8_t *proot_id = NULL;
-+	struct device_node **part_nodes;
- 
- 	/* Pull of_node from the master device node */
- 	mtd_node = mtd_get_of_node(master);
-@@ -95,7 +129,9 @@ static int parse_fixed_partitions(struct
- 		return 0;
- 
- 	parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL);
--	if (!parts)
-+	part_nodes = kcalloc(nr_parts, sizeof(*part_nodes), GFP_KERNEL);
-+
-+	if (!parts || !part_nodes)
- 		return -ENOMEM;
- 
- 	i = 0;
-@@ -147,6 +183,11 @@ static int parse_fixed_partitions(struct
- 		if (of_property_read_bool(pp, "slc-mode"))
- 			parts[i].add_flags |= MTD_SLC_ON_MLC_EMULATION;
- 
-+		if (!proot_id && of_device_is_compatible(pp, "brnboot,root-selector"))
-+			proot_id = brnboot_get_selected_root_part(master, parts[i].offset);
-+
-+		part_nodes[i] = pp;
-+
- 		i++;
- 	}
- 
-@@ -156,6 +197,11 @@ static int parse_fixed_partitions(struct
- 	if (quirks && quirks->post_parse)
- 		quirks->post_parse(master, parts, nr_parts);
- 
-+	if (proot_id)
-+		brnboot_set_active_root_part(parts, part_nodes, nr_parts, proot_id);
-+
-+	kfree(part_nodes);
-+
- 	*pparts = parts;
- 	return nr_parts;
- 
-@@ -166,6 +212,7 @@ ofpart_fail:
- ofpart_none:
- 	of_node_put(pp);
- 	kfree(parts);
-+	kfree(part_nodes);
- 	return ret;
- }
- 
diff --git a/target/linux/lantiq/patches-5.10/0151-lantiq-ifxmips_pcie-use-of.patch b/target/linux/lantiq/patches-5.10/0151-lantiq-ifxmips_pcie-use-of.patch
deleted file mode 100644
index 10633199e67f..000000000000
--- a/target/linux/lantiq/patches-5.10/0151-lantiq-ifxmips_pcie-use-of.patch
+++ /dev/null
@@ -1,387 +0,0 @@
---- a/arch/mips/pci/ifxmips_pcie.c
-+++ b/arch/mips/pci/ifxmips_pcie.c
-@@ -16,8 +16,15 @@
- #include <asm/paccess.h>
- #include <linux/pci.h>
- #include <linux/pci_regs.h>
-+#include <linux/phy/phy.h>
-+#include <linux/regmap.h>
-+#include <linux/reset.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/module.h>
- 
-+#include <linux/of_gpio.h>
-+#include <linux/of_platform.h>
-+
- #include "ifxmips_pcie.h"
- #include "ifxmips_pcie_reg.h"
- 
-@@ -40,6 +47,10 @@
- static DEFINE_SPINLOCK(ifx_pcie_lock);
- 
- u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
-+static int pcie_reset_gpio;
-+static struct phy *ltq_pcie_phy;
-+static struct reset_control *ltq_pcie_reset;
-+static struct regmap *ltq_rcu_regmap;
- 
- static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
-     {
-@@ -82,6 +93,22 @@ void ifx_pcie_debug(const char *fmt, ...
- 	printk("%s", buf);
- }
- 
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+	gpio_direction_output(pcie_reset_gpio, 1);
-+	gpio_set_value(pcie_reset_gpio, 1);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+	gpio_set_value(pcie_reset_gpio, 0);
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+	mdelay(100);
-+	gpio_direction_output(pcie_reset_gpio, 1);
-+}
- 
- static inline int pcie_ltssm_enable(int pcie_port)
- {
-@@ -988,10 +1015,22 @@ int  ifx_pcie_bios_plat_dev_init(struct
- static int
- pcie_rc_initialize(int pcie_port)
- {
--	int i;
-+	int i, ret;
- #define IFX_PCIE_PHY_LOOP_CNT  5
- 
--	pcie_rcu_endian_setup(pcie_port);
-+	regmap_update_bits(ltq_rcu_regmap, 0x4c, IFX_RCU_AHB_BE_PCIE_M,
-+			   IFX_RCU_AHB_BE_PCIE_M);
-+
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+	regmap_update_bits(ltq_rcu_regmap, 0x4c, IFX_RCU_AHB_BE_PCIE_S,
-+			   IFX_RCU_AHB_BE_PCIE_S);
-+#else
-+	regmap_update_bits(ltq_rcu_regmap, 0x4c, IFX_RCU_AHB_BE_PCIE_S,
-+			   0x0);
-+#endif
-+
-+	regmap_update_bits(ltq_rcu_regmap, 0x4c, IFX_RCU_AHB_BE_XBAR_M,
-+			   0x0);
- 
- 	pcie_ep_gpio_rst_init(pcie_port);
- 
-@@ -1000,26 +1039,21 @@ pcie_rc_initialize(int pcie_port)
- 	* reset PCIe PHY will solve this issue 
- 	*/
- 	for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
--		/* Disable PCIe PHY Analog part for sanity check */
--		pcie_phy_pmu_disable(pcie_port);
--
--		pcie_phy_rst_assert(pcie_port);
--		pcie_phy_rst_deassert(pcie_port);
--
--		/* Make sure PHY PLL is stable */
--		udelay(20);
--
--		/* PCIe Core reset enabled, low active, sw programmed */
--		pcie_core_rst_assert(pcie_port);
-+		ret = phy_init(ltq_pcie_phy);
-+		if (ret)
-+			continue;
- 
- 		/* Put PCIe EP in reset status */
- 		pcie_device_rst_assert(pcie_port);
- 
--		/* PCI PHY & Core reset disabled, high active, sw programmed */
--		pcie_core_rst_deassert(pcie_port);
-+		udelay(1);
-+		reset_control_deassert(ltq_pcie_reset);
- 
--		/* Already in a quiet state, program PLL, enable PHY, check ready bit */
--		pcie_phy_clock_mode_setup(pcie_port);
-+		ret = phy_power_on(ltq_pcie_phy);
-+		if (ret) {
-+			phy_exit(ltq_pcie_phy);
-+			continue;
-+		}
- 
- 		/* Enable PCIe PHY and Clock */
- 		pcie_core_pmu_setup(pcie_port);
-@@ -1035,6 +1069,10 @@ pcie_rc_initialize(int pcie_port)
- 		/* Once link is up, break out */
- 		if (pcie_app_loigc_setup(pcie_port) == 0)
- 			break;
-+
-+		phy_power_off(ltq_pcie_phy);
-+		reset_control_assert(ltq_pcie_reset);
-+		phy_exit(ltq_pcie_phy);
- 	}
- 	if (i >= IFX_PCIE_PHY_LOOP_CNT) {
- 		printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
-@@ -1045,17 +1083,67 @@ pcie_rc_initialize(int pcie_port)
- 	return 0;
- }
- 
--static int __init ifx_pcie_bios_init(void)
-+static int ifx_pcie_bios_probe(struct platform_device *pdev)
- {
-+    struct device_node *node = pdev->dev.of_node;
-     void __iomem *io_map_base;
-     int pcie_port;
-     int startup_port;
-+    struct device_node *np;
-+    struct pci_bus *bus;
-+
-+    /*
-+     * In case a PCI device is physical present, the Lantiq PCI driver need
-+     * to be loaded prior to the Lantiq PCIe driver. Otherwise none of them
-+     * will work.
-+     *
-+     * In case the lantiq PCI driver is enabled in the device tree, check if
-+     * a PCI bus (hopefully the one of the Lantiq PCI driver one) is already
-+     * registered.
-+     *
-+     * It will fail if there is another PCI controller, this controller is
-+     * registered before the Lantiq PCIe driver is probe and the lantiq PCI
-+     */
-+    np = of_find_compatible_node(NULL, NULL, "lantiq,pci-xway");
-+
-+    if (of_device_is_available(np)) {
-+        bus = pci_find_next_bus(bus);
-+
-+        if (!bus)
-+	     return -EPROBE_DEFER;
-+    }
- 
-     /* Enable AHB Master/ Slave */
-     pcie_ahb_pmu_setup();
- 
-     startup_port = IFX_PCIE_PORT0;
--    
-+
-+    ltq_pcie_phy = devm_phy_get(&pdev->dev, "pcie");
-+    if (IS_ERR(ltq_pcie_phy)) {
-+        dev_err(&pdev->dev, "failed to get the PCIe PHY\n");
-+        return PTR_ERR(ltq_pcie_phy);
-+    }
-+
-+    ltq_pcie_reset = devm_reset_control_get_shared(&pdev->dev, NULL);
-+    if (IS_ERR(ltq_pcie_reset)) {
-+        dev_err(&pdev->dev, "failed to get the PCIe reset line\n");
-+        return PTR_ERR(ltq_pcie_reset);
-+    }
-+
-+    ltq_rcu_regmap = syscon_regmap_lookup_by_phandle(node, "lantiq,rcu");
-+    if (IS_ERR(ltq_rcu_regmap))
-+        return PTR_ERR(ltq_rcu_regmap);
-+
-+    pcie_reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
-+    if (gpio_is_valid(pcie_reset_gpio)) {
-+        int ret = devm_gpio_request(&pdev->dev, pcie_reset_gpio, "pcie-reset");
-+        if (ret) {
-+            dev_err(&pdev->dev, "failed to request gpio %d\n", pcie_reset_gpio);
-+            return ret;
-+        }
-+        gpio_direction_output(pcie_reset_gpio, 1);
-+    }
-+
-     for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
- 	if (pcie_rc_initialize(pcie_port) == 0) {
- 	    IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", 
-@@ -1067,6 +1155,7 @@ static int __init ifx_pcie_bios_init(voi
-                 return -ENOMEM;
-             }
-             ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
-+            pci_load_of_ranges(&ifx_pcie_controller[pcie_port].pcic, node);
- 
-             register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
-             /* XXX, clear error status */
-@@ -1083,6 +1172,30 @@ static int __init ifx_pcie_bios_init(voi
- 
-     return 0;
- }
-+
-+static const struct of_device_id ifxmips_pcie_match[] = {
-+        { .compatible = "lantiq,pcie-xrx200" },
-+        {},
-+};
-+MODULE_DEVICE_TABLE(of, ifxmips_pcie_match);
-+
-+static struct platform_driver ltq_pci_driver = {
-+        .probe = ifx_pcie_bios_probe,
-+        .driver = {
-+                .name = "pcie-xrx200",
-+                .owner = THIS_MODULE,
-+                .of_match_table = ifxmips_pcie_match,
-+        },
-+};
-+
-+int __init ifx_pcie_bios_init(void)
-+{
-+        int ret = platform_driver_register(&ltq_pci_driver);
-+        if (ret)
-+                pr_info("pcie-xrx200: Error registering platform driver!");
-+        return ret;
-+}
-+
- arch_initcall(ifx_pcie_bios_init);
- 
- MODULE_LICENSE("GPL");
---- a/arch/mips/pci/ifxmips_pcie_vr9.h
-+++ b/arch/mips/pci/ifxmips_pcie_vr9.h
-@@ -22,8 +22,6 @@
- #include <linux/gpio.h>
- #include <lantiq_soc.h>
- 
--#define IFX_PCIE_GPIO_RESET  494
--
- #define IFX_REG_R32    ltq_r32
- #define IFX_REG_W32    ltq_w32
- #define CONFIG_IFX_PCIE_HW_SWAP
-@@ -53,21 +51,6 @@
- #define OUT			((volatile u32*)(IFX_GPIO + 0x0070))
- 
- 
--static inline void pcie_ep_gpio_rst_init(int pcie_port)
--{
--
--	gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset");
--	gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
--	gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
--
--/*    ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
--    ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
--    ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
--    ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
--    ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
--    ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/
--}
--
- static inline void pcie_ahb_pmu_setup(void) 
- {
- 	/* Enable AHB bus master/slave */
-@@ -79,24 +62,6 @@ static inline void pcie_ahb_pmu_setup(vo
-     //AHBS_PMU_SETUP(IFX_PMU_ENABLE);
- }
- 
--static inline void pcie_rcu_endian_setup(int pcie_port)
--{
--    u32 reg;
--
--    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
--#ifdef CONFIG_IFX_PCIE_HW_SWAP
--    reg |= IFX_RCU_AHB_BE_PCIE_M;
--    reg |= IFX_RCU_AHB_BE_PCIE_S;
--    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
--#else 
--    reg |= IFX_RCU_AHB_BE_PCIE_M;
--    reg &= ~IFX_RCU_AHB_BE_PCIE_S;
--    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
--#endif /* CONFIG_IFX_PCIE_HW_SWAP */
--    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
--    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
--}
--
- static inline void pcie_phy_pmu_enable(int pcie_port)
- {
- 	struct clk *clk;
-@@ -115,17 +80,6 @@ static inline void pcie_phy_pmu_disable(
- //    PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE);
- }
- 
--static inline void pcie_pdi_big_endian(int pcie_port)
--{
--    u32 reg;
--
--    /* SRAM2PDI endianness control. */
--    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
--    /* Config AHB->PCIe and PDI endianness */
--    reg |= IFX_RCU_AHB_BE_PCIE_PDI;
--    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
--}
--
- static inline void pcie_pdi_pmu_enable(int pcie_port)
- {
-     /* Enable PDI to access PCIe PHY register */
-@@ -135,65 +89,6 @@ static inline void pcie_pdi_pmu_enable(i
-     //PDI_PMU_SETUP(IFX_PMU_ENABLE);
- }
- 
--static inline void pcie_core_rst_assert(int pcie_port)
--{
--    u32 reg;
--
--    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
--
--    /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly  */
--    reg |= 0x00400000;
--    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
--}
--
--static inline void pcie_core_rst_deassert(int pcie_port)
--{
--    u32 reg;
--
--    /* Make sure one micro-second delay */
--    udelay(1);
--
--    /* Reset PCIe PHY & Core, bit 22 */
--    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
--    reg &= ~0x00400000;
--    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
--}
--
--static inline void pcie_phy_rst_assert(int pcie_port)
--{
--    u32 reg;
--
--    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
--    reg |= 0x00001000; /* Bit 12 */
--    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
--}
--
--static inline void pcie_phy_rst_deassert(int pcie_port)
--{
--    u32 reg;
--
--    /* Make sure one micro-second delay */
--    udelay(1);
--
--    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
--    reg &= ~0x00001000; /* Bit 12 */
--    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
--}
--
--static inline void pcie_device_rst_assert(int pcie_port)
--{
--	gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
--//    ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
--}
--
--static inline void pcie_device_rst_deassert(int pcie_port)
--{
--    mdelay(100);
--	gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
--//    gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
--    //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
--}
--
- static inline void pcie_core_pmu_setup(int pcie_port)
- {
- 	struct clk *clk;
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -43,7 +43,7 @@ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o
- obj-$(CONFIG_SOC_MT7620)	+= pci-mt7620.o
- obj-$(CONFIG_SOC_RT288X)	+= pci-rt2880.o
- obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
--obj-$(CONFIG_PCIE_LANTIQ)	+= ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o
-+obj-$(CONFIG_PCIE_LANTIQ)	+= ifxmips_pcie.o fixup-lantiq-pcie.o
- obj-$(CONFIG_PCIE_LANTIQ_MSI)	+= pcie-lantiq-msi.o
- obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
- obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
diff --git a/target/linux/lantiq/patches-5.10/0152-lantiq-VPE.patch b/target/linux/lantiq/patches-5.10/0152-lantiq-VPE.patch
deleted file mode 100644
index cde8ae5ed02f..000000000000
--- a/target/linux/lantiq/patches-5.10/0152-lantiq-VPE.patch
+++ /dev/null
@@ -1,172 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2434,6 +2434,12 @@ config MIPS_VPE_LOADER
- 	  Includes a loader for loading an elf relocatable object
- 	  onto another VPE and running it.
- 
-+config IFX_VPE_EXT
-+	bool "IFX APRP Extensions"
-+	depends on MIPS_VPE_LOADER
-+	help
-+	  IFX included extensions in APRP
-+
- config MIPS_VPE_LOADER_CMP
- 	bool
- 	default "y"
---- a/arch/mips/include/asm/vpe.h
-+++ b/arch/mips/include/asm/vpe.h
-@@ -126,4 +126,13 @@ void cleanup_tc(struct tc *tc);
- 
- int __init vpe_module_init(void);
- void __exit vpe_module_exit(void);
-+
-+/* For the explanation of the APIs please refer the section "MT APRP Kernel
-+ * Programming" in AR9 SW Architecture Specification
-+ */
-+int32_t vpe1_sw_start(void *sw_start_addr, uint32_t tcmask, uint32_t flags);
-+int32_t vpe1_sw_stop(uint32_t flags);
-+uint32_t vpe1_get_load_addr(uint32_t flags);
-+uint32_t vpe1_get_max_mem(uint32_t flags);
-+
- #endif /* _ASM_VPE_H */
---- a/arch/mips/kernel/vpe-mt.c
-+++ b/arch/mips/kernel/vpe-mt.c
-@@ -415,6 +415,8 @@ int __init vpe_module_init(void)
- 			}
- 
- 			v->ntcs = hw_tcs - aprp_cpu_index();
-+			write_tc_c0_tcbind((read_tc_c0_tcbind() &
-+						~TCBIND_CURVPE) | 1);
- 
- 			/* add the tc to the list of this vpe's tc's. */
- 			list_add(&t->tc, &v->tc);
-@@ -518,3 +520,47 @@ void __exit vpe_module_exit(void)
- 			release_vpe(v);
- 	}
- }
-+
-+#ifdef CONFIG_IFX_VPE_EXT
-+int32_t vpe1_sw_start(void *sw_start_addr, uint32_t tcmask, uint32_t flags)
-+{
-+	enum vpe_state state;
-+	struct vpe *v = get_vpe(tclimit);
-+	struct vpe_notifications *not;
-+
-+	if (tcmask || flags) {
-+		pr_warn("Currently tcmask and flags should be 0. Other values are not supported\n");
-+		return -1;
-+	}
-+
-+	state = xchg(&v->state, VPE_STATE_INUSE);
-+	if (state != VPE_STATE_UNUSED) {
-+		vpe_stop(v);
-+
-+		list_for_each_entry(not, &v->notify, list) {
-+			not->stop(tclimit);
-+		}
-+	}
-+
-+	v->__start = (unsigned long)sw_start_addr;
-+
-+	if (!vpe_run(v)) {
-+		pr_debug("VPE loader: VPE1 running successfully\n");
-+		return 0;
-+	}
-+	return -1;
-+}
-+EXPORT_SYMBOL(vpe1_sw_start);
-+
-+int32_t vpe1_sw_stop(uint32_t flags)
-+{
-+	struct vpe *v = get_vpe(tclimit);
-+
-+	if (!vpe_free(v)) {
-+		pr_debug("RP Stopped\n");
-+		return 0;
-+	} else
-+		return -1;
-+}
-+EXPORT_SYMBOL(vpe1_sw_stop);
-+#endif
---- a/arch/mips/kernel/vpe.c
-+++ b/arch/mips/kernel/vpe.c
-@@ -49,6 +49,41 @@ struct vpe_control vpecontrol = {
- 	.tc_list	= LIST_HEAD_INIT(vpecontrol.tc_list)
- };
- 
-+#ifdef CONFIG_IFX_VPE_EXT
-+unsigned int vpe1_load_addr;
-+
-+static int __init load_address(char *str)
-+{
-+	get_option(&str, &vpe1_load_addr);
-+	return 1;
-+}
-+__setup("vpe1_load_addr=", load_address);
-+
-+static unsigned int vpe1_mem;
-+static int __init vpe1mem(char *str)
-+{
-+	vpe1_mem = memparse(str, &str);
-+	return 1;
-+}
-+__setup("vpe1_mem=", vpe1mem);
-+
-+uint32_t vpe1_get_load_addr(uint32_t flags)
-+{
-+	return vpe1_load_addr;
-+}
-+EXPORT_SYMBOL(vpe1_get_load_addr);
-+
-+uint32_t vpe1_get_max_mem(uint32_t flags)
-+{
-+	if (!vpe1_mem)
-+		return P_SIZE;
-+	else
-+		return vpe1_mem;
-+}
-+EXPORT_SYMBOL(vpe1_get_max_mem);
-+
-+#endif
-+
- /* get the vpe associated with this minor */
- struct vpe *get_vpe(int minor)
- {
---- a/arch/mips/lantiq/prom.c
-+++ b/arch/mips/lantiq/prom.c
-@@ -28,10 +28,14 @@ EXPORT_SYMBOL_GPL(ebu_lock);
-  */
- static struct ltq_soc_info soc_info;
- 
-+/* for Multithreading (APRP), vpe.c will use it */
-+unsigned long cp0_memsize;
-+
- const char *get_system_type(void)
- {
- 	return soc_info.sys_type;
- }
-+EXPORT_SYMBOL(ltq_soc_type);
- 
- int ltq_soc_type(void)
- {
---- a/arch/mips/include/asm/mipsmtregs.h
-+++ b/arch/mips/include/asm/mipsmtregs.h
-@@ -32,6 +32,9 @@
- #define read_c0_vpeconf1()		__read_32bit_c0_register($1, 3)
- #define write_c0_vpeconf1(val)		__write_32bit_c0_register($1, 3, val)
- 
-+#define read_c0_vpeopt()		__read_32bit_c0_register($1, 7)
-+#define write_c0_vpeopt(val)		__write_32bit_c0_register($1, 7, val)
-+
- #define read_c0_tcstatus()		__read_32bit_c0_register($2, 1)
- #define write_c0_tcstatus(val)		__write_32bit_c0_register($2, 1, val)
- 
-@@ -378,6 +381,8 @@ do {									\
- #define write_vpe_c0_vpeconf0(val)	mttc0(1, 2, val)
- #define read_vpe_c0_vpeconf1()		mftc0(1, 3)
- #define write_vpe_c0_vpeconf1(val)	mttc0(1, 3, val)
-+#define read_vpe_c0_vpeopt()		mftc0(1, 7)
-+#define write_vpe_c0_vpeopt(val)	mttc0(1, 7, val)
- #define read_vpe_c0_count()		mftc0(9, 0)
- #define write_vpe_c0_count(val)		mttc0(9, 0, val)
- #define read_vpe_c0_status()		mftc0(12, 0)
diff --git a/target/linux/lantiq/patches-5.10/0154-lantiq-pci-bar11mask-fix.patch b/target/linux/lantiq/patches-5.10/0154-lantiq-pci-bar11mask-fix.patch
deleted file mode 100644
index d6556d115df4..000000000000
--- a/target/linux/lantiq/patches-5.10/0154-lantiq-pci-bar11mask-fix.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/pci/pci-lantiq.c
-+++ b/arch/mips/pci/pci-lantiq.c
-@@ -59,6 +59,8 @@
- #define ltq_pci_cfg_w32(x, y)	ltq_w32((x), ltq_pci_mapped_cfg + (y))
- #define ltq_pci_cfg_r32(x)	ltq_r32(ltq_pci_mapped_cfg + (x))
- 
-+extern u32 max_low_pfn;
-+
- __iomem void *ltq_pci_mapped_cfg;
- static __iomem void *ltq_pci_membase;
- 
-@@ -84,8 +86,8 @@ static inline u32 ltq_calc_bar11mask(voi
- 	u32 mem, bar11mask;
- 
- 	/* BAR11MASK value depends on available memory on system. */
--	mem = get_num_physpages() * PAGE_SIZE;
--	bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
-+	mem = max_low_pfn << PAGE_SHIFT;
-+	bar11mask = ((-roundup_pow_of_two(mem)) & 0x0F000000) | 8;
- 
- 	return bar11mask;
- }
diff --git a/target/linux/lantiq/patches-5.10/0155-lantiq-VPE-nosmp.patch b/target/linux/lantiq/patches-5.10/0155-lantiq-VPE-nosmp.patch
deleted file mode 100644
index 2705723dda6c..000000000000
--- a/target/linux/lantiq/patches-5.10/0155-lantiq-VPE-nosmp.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/arch/mips/kernel/vpe-mt.c
-+++ b/arch/mips/kernel/vpe-mt.c
-@@ -130,7 +130,10 @@ int vpe_run(struct vpe *v)
- 	 * kernels need to turn it on, even if that wasn't the pre-dvpe() state.
- 	 */
- #ifdef CONFIG_SMP
--	evpe(vpeflags);
-+	if (!setup_max_cpus) /* nosmp is set */
-+		evpe(EVPE_ENABLE);
-+	else
-+		evpe(vpeflags);
- #else
- 	evpe(EVPE_ENABLE);
- #endif
diff --git a/target/linux/lantiq/patches-5.10/0160-owrt-lantiq-multiple-flash.patch b/target/linux/lantiq/patches-5.10/0160-owrt-lantiq-multiple-flash.patch
deleted file mode 100644
index 796220b2bc27..000000000000
--- a/target/linux/lantiq/patches-5.10/0160-owrt-lantiq-multiple-flash.patch
+++ /dev/null
@@ -1,220 +0,0 @@
---- a/drivers/mtd/maps/lantiq-flash.c
-+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -17,6 +17,7 @@
- #include <linux/mtd/cfi.h>
- #include <linux/platform_device.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/mtd/concat.h>
- #include <linux/of.h>
- 
- #include <lantiq_soc.h>
-@@ -36,13 +37,16 @@ enum {
- 	LTQ_NOR_NORMAL
- };
- 
-+#define MAX_RESOURCES		4
-+
- struct ltq_mtd {
--	struct resource *res;
--	struct mtd_info *mtd;
--	struct map_info *map;
-+	struct mtd_info *mtd[MAX_RESOURCES];
-+	struct mtd_info	*cmtd;
-+	struct map_info map[MAX_RESOURCES];
- };
- 
- static const char ltq_map_name[] = "ltq_nor";
-+static const char * const ltq_probe_types[] = { "cmdlinepart", "ofpart", NULL };
- 
- static map_word
- ltq_read16(struct map_info *map, unsigned long adr)
-@@ -106,11 +110,43 @@ ltq_copy_to(struct map_info *map, unsign
- }
- 
- static int
-+ltq_mtd_remove(struct platform_device *pdev)
-+{
-+	struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
-+	int i;
-+
-+	if (ltq_mtd == NULL)
-+		return 0;
-+
-+	if (ltq_mtd->cmtd) {
-+		mtd_device_unregister(ltq_mtd->cmtd);
-+		if (ltq_mtd->cmtd != ltq_mtd->mtd[0])
-+			mtd_concat_destroy(ltq_mtd->cmtd);
-+	}
-+
-+	for (i = 0; i < MAX_RESOURCES; i++) {
-+		if (ltq_mtd->mtd[i] != NULL)
-+			map_destroy(ltq_mtd->mtd[i]);
-+	}
-+
-+	kfree(ltq_mtd);
-+
-+	return 0;
-+}
-+
-+static int
- ltq_mtd_probe(struct platform_device *pdev)
- {
- 	struct ltq_mtd *ltq_mtd;
- 	struct cfi_private *cfi;
--	int err;
-+	int err = 0;
-+	int i;
-+	int devices_found = 0;
-+
-+	static const char *rom_probe_types[] = {
-+		"cfi_probe", "jedec_probe", NULL
-+	};
-+	const char **type;
- 
- 	ltq_mtd = devm_kzalloc(&pdev->dev, sizeof(struct ltq_mtd), GFP_KERNEL);
- 	if (!ltq_mtd)
-@@ -118,75 +154,89 @@ ltq_mtd_probe(struct platform_device *pd
- 
- 	platform_set_drvdata(pdev, ltq_mtd);
- 
--	ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	if (!ltq_mtd->res) {
--		dev_err(&pdev->dev, "failed to get memory resource\n");
--		return -ENOENT;
-+	for (i = 0; i < pdev->num_resources; i++) {
-+		printk(KERN_NOTICE "lantiq nor flash device: %.8llx at %.8llx\n",
-+		       (unsigned long long)resource_size(&pdev->resource[i]),
-+		       (unsigned long long)pdev->resource[i].start);
-+	
-+		if (!devm_request_mem_region(&pdev->dev,
-+			pdev->resource[i].start,
-+			resource_size(&pdev->resource[i]),
-+			dev_name(&pdev->dev))) {
-+			dev_err(&pdev->dev, "Could not reserve memory region\n");
-+			return -ENOMEM;
-+		}
-+
-+		ltq_mtd->map[i].name = ltq_map_name;
-+		ltq_mtd->map[i].bankwidth = 2;
-+		ltq_mtd->map[i].read = ltq_read16;
-+		ltq_mtd->map[i].write = ltq_write16;
-+		ltq_mtd->map[i].copy_from = ltq_copy_from;
-+		ltq_mtd->map[i].copy_to = ltq_copy_to;
-+
-+		if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
-+			ltq_mtd->map[i].phys = NO_XIP;
-+		else
-+			ltq_mtd->map[i].phys = pdev->resource[i].start;
-+		ltq_mtd->map[i].size = resource_size(&pdev->resource[i]);
-+		ltq_mtd->map[i].virt = devm_ioremap(&pdev->dev, pdev->resource[i].start,
-+						 ltq_mtd->map[i].size);
-+		if (IS_ERR(ltq_mtd->map[i].virt))
-+			return PTR_ERR(ltq_mtd->map[i].virt);
-+
-+		if (ltq_mtd->map[i].virt == NULL) {
-+			dev_err(&pdev->dev, "Failed to ioremap flash region\n");
-+			err = PTR_ERR(ltq_mtd->map[i].virt);
-+			goto err_out;
-+		}
-+
-+		ltq_mtd->map[i].map_priv_1 = LTQ_NOR_PROBING;
-+		for (type = rom_probe_types; !ltq_mtd->mtd[i] && *type; type++)
-+			ltq_mtd->mtd[i] = do_map_probe(*type, &ltq_mtd->map[i]);
-+		ltq_mtd->map[i].map_priv_1 = LTQ_NOR_NORMAL;
-+
-+		if (!ltq_mtd->mtd[i]) {
-+			dev_err(&pdev->dev, "probing failed\n");
-+			return -ENXIO;
-+		} else {
-+			devices_found++;
-+		}
-+
-+		ltq_mtd->mtd[i]->owner = THIS_MODULE;
-+		ltq_mtd->mtd[i]->dev.parent = &pdev->dev;
-+
-+		cfi = ltq_mtd->map[i].fldrv_priv;
-+		cfi->addr_unlock1 ^= 1;
-+		cfi->addr_unlock2 ^= 1;
- 	}
- 
--	ltq_mtd->map = devm_kzalloc(&pdev->dev, sizeof(struct map_info),
--				    GFP_KERNEL);
--	if (!ltq_mtd->map)
--		return -ENOMEM;
--
--	if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
--		ltq_mtd->map->phys = NO_XIP;
--	else
--		ltq_mtd->map->phys = ltq_mtd->res->start;
--	ltq_mtd->res->start;
--	ltq_mtd->map->size = resource_size(ltq_mtd->res);
--	ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
--	if (IS_ERR(ltq_mtd->map->virt))
--		return PTR_ERR(ltq_mtd->map->virt);
--
--	ltq_mtd->map->name = ltq_map_name;
--	ltq_mtd->map->bankwidth = 2;
--	ltq_mtd->map->read = ltq_read16;
--	ltq_mtd->map->write = ltq_write16;
--	ltq_mtd->map->copy_from = ltq_copy_from;
--	ltq_mtd->map->copy_to = ltq_copy_to;
--
--	ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
--	ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map);
--	ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
--
--	if (!ltq_mtd->mtd) {
--		dev_err(&pdev->dev, "probing failed\n");
--		return -ENXIO;
-+	if (devices_found == 1) {
-+		ltq_mtd->cmtd = ltq_mtd->mtd[0];
-+	} else if (devices_found > 1) {
-+		/*
-+		 * We detected multiple devices. Concatenate them together.
-+		 */
-+		ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev));
-+		if (ltq_mtd->cmtd == NULL)
-+			err = -ENXIO;
- 	}
- 
--	ltq_mtd->mtd->dev.parent = &pdev->dev;
--	mtd_set_of_node(ltq_mtd->mtd, pdev->dev.of_node);
--
--	cfi = ltq_mtd->map->fldrv_priv;
--	cfi->addr_unlock1 ^= 1;
--	cfi->addr_unlock2 ^= 1;
-+	ltq_mtd->cmtd->dev.parent = &pdev->dev;
-+	mtd_set_of_node(ltq_mtd->cmtd, pdev->dev.of_node);
- 
--	err = mtd_device_register(ltq_mtd->mtd, NULL, 0);
-+	err = mtd_device_register(ltq_mtd->cmtd, NULL, 0);
- 	if (err) {
- 		dev_err(&pdev->dev, "failed to add partitions\n");
--		goto err_destroy;
-+		goto err_out;
- 	}
- 
- 	return 0;
- 
--err_destroy:
--	map_destroy(ltq_mtd->mtd);
-+err_out:
-+	ltq_mtd_remove(pdev);
- 	return err;
- }
- 
--static int
--ltq_mtd_remove(struct platform_device *pdev)
--{
--	struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
--
--	if (ltq_mtd && ltq_mtd->mtd) {
--		mtd_device_unregister(ltq_mtd->mtd);
--		map_destroy(ltq_mtd->mtd);
--	}
--	return 0;
--}
--
- static const struct of_device_id ltq_mtd_match[] = {
- 	{ .compatible = "lantiq,nor" },
- 	{},
diff --git a/target/linux/lantiq/patches-5.10/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch b/target/linux/lantiq/patches-5.10/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch
deleted file mode 100644
index d153c521d33e..000000000000
--- a/target/linux/lantiq/patches-5.10/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -39,7 +39,7 @@
- /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */
- 
- // debugging, turns off buffer write mode if set to 1
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
- 
- /* Intel chips */
- #define I82802AB	0x00ad
diff --git a/target/linux/lantiq/patches-5.10/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch b/target/linux/lantiq/patches-5.10/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch
deleted file mode 100644
index 92c4b564930b..000000000000
--- a/target/linux/lantiq/patches-5.10/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -440,6 +440,20 @@ static void clkdev_add_clkout(void)
- 	}
- }
- 
-+static void set_phy_clock_source(struct device_node *np_cgu)
-+{
-+	u32 phy_clk_src, ifcc;
-+
-+	if (!np_cgu)
-+		return;
-+
-+	if (of_property_read_u32(np_cgu, "lantiq,phy-clk-src", &phy_clk_src))
-+		return;
-+
-+	ifcc = ltq_cgu_r32(ifccr) & ~(0x1c);
-+	ltq_cgu_w32(ifcc | (phy_clk_src << 2), ifccr);
-+}
-+
- /* bring up all register ranges that we need for basic system control */
- void __init ltq_soc_init(void)
- {
-@@ -605,4 +619,6 @@ void __init ltq_soc_init(void)
- 		clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
- 	}
- 	usb_set_clock();
-+
-+	set_phy_clock_source(np_cgu);
- }
diff --git a/target/linux/lantiq/patches-5.10/0310-v5.16-MIPS-lantiq-dma-make-the-burst-length-configurable-b.patch b/target/linux/lantiq/patches-5.10/0310-v5.16-MIPS-lantiq-dma-make-the-burst-length-configurable-b.patch
deleted file mode 100644
index 33c06e9d7785..000000000000
--- a/target/linux/lantiq/patches-5.10/0310-v5.16-MIPS-lantiq-dma-make-the-burst-length-configurable-b.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 49293bbc50cb7d44223eb49e0f7cb38e7dac2361 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Tue, 14 Sep 2021 23:21:01 +0200
-Subject: [PATCH 4/5] MIPS: lantiq: dma: make the burst length configurable by
- the drivers
-
-Make the burst length configurable by the drivers.
-
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../include/asm/mach-lantiq/xway/xway_dma.h   |  2 +-
- arch/mips/lantiq/xway/dma.c                   | 38 ++++++++++++++++---
- 2 files changed, 34 insertions(+), 6 deletions(-)
-
---- a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
-@@ -45,6 +45,6 @@ extern void ltq_dma_close(struct ltq_dma
- extern void ltq_dma_alloc_tx(struct ltq_dma_channel *ch);
- extern void ltq_dma_alloc_rx(struct ltq_dma_channel *ch);
- extern void ltq_dma_free(struct ltq_dma_channel *ch);
--extern void ltq_dma_init_port(int p);
-+extern void ltq_dma_init_port(int p, int tx_burst, int rx_burst);
- 
- #endif
---- a/arch/mips/lantiq/xway/dma.c
-+++ b/arch/mips/lantiq/xway/dma.c
-@@ -181,7 +181,7 @@ ltq_dma_free(struct ltq_dma_channel *ch)
- EXPORT_SYMBOL_GPL(ltq_dma_free);
- 
- void
--ltq_dma_init_port(int p)
-+ltq_dma_init_port(int p, int tx_burst, int rx_burst)
- {
- 	ltq_dma_w32(p, LTQ_DMA_PS);
- 	switch (p) {
-@@ -190,16 +190,44 @@ ltq_dma_init_port(int p)
- 		 * Tell the DMA engine to swap the endianness of data frames and
- 		 * drop packets if the channel arbitration fails.
- 		 */
--		ltq_dma_w32_mask(0, DMA_ETOP_ENDIANNESS | DMA_PDEN,
-+		ltq_dma_w32_mask(0, (DMA_ETOP_ENDIANNESS | DMA_PDEN),
- 			LTQ_DMA_PCTRL);
- 		break;
- 
--	case DMA_PORT_DEU:
--		ltq_dma_w32((DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT) |
--			(DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT),
-+	default:
-+		break;
-+	}
-+
-+	switch (rx_burst) {
-+	case 8:
-+		ltq_dma_w32_mask(0x0c, (DMA_PCTRL_8W_BURST << DMA_RX_BURST_SHIFT),
- 			LTQ_DMA_PCTRL);
- 		break;
-+	case 4:
-+		ltq_dma_w32_mask(0x0c, (DMA_PCTRL_4W_BURST << DMA_RX_BURST_SHIFT),
-+			LTQ_DMA_PCTRL);
-+		break;
-+	case 2:
-+		ltq_dma_w32_mask(0x0c, (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT),
-+			LTQ_DMA_PCTRL);
-+		break;
-+	default:
-+		break;
-+	}
- 
-+	switch (tx_burst) {
-+	case 8:
-+		ltq_dma_w32_mask(0x30, (DMA_PCTRL_8W_BURST << DMA_TX_BURST_SHIFT),
-+			LTQ_DMA_PCTRL);
-+		break;
-+	case 4:
-+		ltq_dma_w32_mask(0x30, (DMA_PCTRL_4W_BURST << DMA_TX_BURST_SHIFT),
-+			LTQ_DMA_PCTRL);
-+		break;
-+	case 2:
-+		ltq_dma_w32_mask(0x30, (DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT),
-+			LTQ_DMA_PCTRL);
-+		break;
- 	default:
- 		break;
- 	}
diff --git a/target/linux/lantiq/patches-5.10/0320-v6.1-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch b/target/linux/lantiq/patches-5.10/0320-v6.1-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch
deleted file mode 100644
index 0bb1fefc5f64..000000000000
--- a/target/linux/lantiq/patches-5.10/0320-v6.1-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 730320fd770d4114a2ecb6fb223dcc8c3cecdc5b Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Wed, 21 Sep 2022 22:59:44 +0200
-Subject: [PATCH] MIPS: lantiq: enable all hardware interrupts on second VPE
-
-This patch is needed to handle interrupts by the second VPE on the Lantiq
-ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to
-the second VPE results in a hang. Currently, the vsmp_init_secondary()
-function is responsible for enabling these interrupts. It only enables
-Malta-specific interrupts (SW0, SW1, HW4 and HW5).
-
-The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware
-interrupts are wired to an ICU instance. Each VPE has an independent
-instance of the ICU. The mapping of the ICU interrupts is shown below:
-SW0(IP0) - IPI call,
-SW1(IP1) - IPI resched,
-HW0(IP2) - ICU 0-31,
-HW1(IP3) - ICU 32-63,
-HW2(IP4) - ICU 64-95,
-HW3(IP5) - ICU 96-127,
-HW4(IP6) - ICU 128-159,
-HW5(IP7) - timer.
-
-This patch enables all interrupt lines on the second VPE.
-
-This problem affects multithreaded SoCs with a custom interrupt controller.
-SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware
-that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the
-future, this may be replaced with some generic solution.
-
-Tested on Lantiq xRX200.
-
-Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/lantiq/prom.c | 26 ++++++++++++++++++++++++--
- 1 file changed, 24 insertions(+), 2 deletions(-)
-
---- a/arch/mips/lantiq/prom.c
-+++ b/arch/mips/lantiq/prom.c
-@@ -31,6 +31,14 @@ static struct ltq_soc_info soc_info;
- /* for Multithreading (APRP), vpe.c will use it */
- unsigned long cp0_memsize;
- 
-+/*
-+ * These structs are used to override vsmp_init_secondary()
-+ */
-+#if defined(CONFIG_MIPS_MT_SMP)
-+extern const struct plat_smp_ops vsmp_smp_ops;
-+static struct plat_smp_ops lantiq_smp_ops;
-+#endif
-+
- const char *get_system_type(void)
- {
- 	return soc_info.sys_type;
-@@ -94,6 +102,17 @@ void __init device_tree_init(void)
- 	unflatten_and_copy_device_tree();
- }
- 
-+#if defined(CONFIG_MIPS_MT_SMP)
-+static void lantiq_init_secondary(void)
-+{
-+	/*
-+	 * MIPS CPU startup function vsmp_init_secondary() will only
-+	 * enable some of the interrupts for the second CPU/VPE.
-+	 */
-+	set_c0_status(ST0_IM);
-+}
-+#endif
-+
- void __init prom_init(void)
- {
- 	/* call the soc specific detetcion code and get it to fill soc_info */
-@@ -105,7 +124,10 @@ void __init prom_init(void)
- 	prom_init_cmdline();
- 
- #if defined(CONFIG_MIPS_MT_SMP)
--	if (register_vsmp_smp_ops())
--		panic("failed to register_vsmp_smp_ops()");
-+	if (cpu_has_mipsmt) {
-+		lantiq_smp_ops = vsmp_smp_ops;
-+		lantiq_smp_ops.init_secondary = lantiq_init_secondary;
-+		register_smp_ops(&lantiq_smp_ops);
-+	}
- #endif
- }
diff --git a/target/linux/lantiq/patches-5.10/0400-mtd-rawnand-xway-don-t-yield-while-holding-spinlock.patch b/target/linux/lantiq/patches-5.10/0400-mtd-rawnand-xway-don-t-yield-while-holding-spinlock.patch
deleted file mode 100644
index edf062686092..000000000000
--- a/target/linux/lantiq/patches-5.10/0400-mtd-rawnand-xway-don-t-yield-while-holding-spinlock.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 416f25a948d11ef15733f2e31658d31b5cc7bef6 Mon Sep 17 00:00:00 2001
-From: Thomas Nixon <tom@tomn.co.uk>
-Date: Sun, 26 Mar 2023 11:08:49 +0100
-Subject: [PATCH] mtd: rawnand: xway: don't yield while holding spinlock
-
-The nand driver normally while waiting for the device to become ready;
-this is normally fine, but xway_nand holds the ebu_lock spinlock, and
-this can cause lockups if other threads which use ebu_lock are
-interleaved. Fix this by waiting instead of polling.
-
-This mainly showed up as crashes in ath9k_pci_owl_loader (see
-https://github.com/openwrt/openwrt/issues/9829 ), but turning on
-spinlock debugging shows this happening in other places too.
-
-This doesn't seem to measurably impact boot time.
-
-Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
----
- drivers/mtd/nand/raw/xway_nand.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/nand/raw/xway_nand.c
-+++ b/drivers/mtd/nand/raw/xway_nand.c
-@@ -175,7 +175,13 @@ static void xway_cmd_ctrl(struct nand_ch
- 
- static int xway_dev_ready(struct nand_chip *chip)
- {
--	return ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD;
-+	/*
-+	 * wait until ready, as otherwise the driver will yield in nand_wait or
-+	 * nand_wait_ready, which is a bad idea when we're holding ebu_lock
-+	 */
-+	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD) == 0)
-+		cpu_relax();
-+	return 1;
- }
- 
- static unsigned char xway_read_byte(struct nand_chip *chip)
diff --git a/target/linux/lantiq/patches-5.10/0701-NET-lantiq-etop-of-mido.patch b/target/linux/lantiq/patches-5.10/0701-NET-lantiq-etop-of-mido.patch
deleted file mode 100644
index 2cc541ae3cf9..000000000000
--- a/target/linux/lantiq/patches-5.10/0701-NET-lantiq-etop-of-mido.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -30,6 +30,7 @@
- #include <linux/of_net.h>
- #include <linux/of_irq.h>
- #include <linux/of_platform.h>
-+#include <linux/of_mdio.h>
- 
- #include <asm/checksum.h>
- 
-@@ -553,7 +554,8 @@ static int
- ltq_etop_mdio_init(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int err;
-+	struct device_node *mdio_np = NULL;
-+	int err, ret;
- 
- 	priv->mii_bus = mdiobus_alloc();
- 	if (!priv->mii_bus) {
-@@ -573,7 +575,15 @@ ltq_etop_mdio_init(struct net_device *de
- 	priv->mii_bus->name = "ltq_mii";
- 	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
- 		priv->pdev->name, priv->pdev->id);
--	if (mdiobus_register(priv->mii_bus)) {
-+
-+	mdio_np = of_get_child_by_name(priv->pdev->dev.of_node, "mdio-bus");
-+
-+	if (mdio_np)
-+		ret = of_mdiobus_register(priv->mii_bus, mdio_np);
-+	else
-+		ret = mdiobus_register(priv->mii_bus);
-+
-+	if (ret) {
- 		err = -ENXIO;
- 		goto err_out_free_mdiobus;
- 	}
diff --git a/target/linux/lantiq/patches-5.10/0702-v5.16-net-lantiq-add-support-for-jumbo-frames.patch b/target/linux/lantiq/patches-5.10/0702-v5.16-net-lantiq-add-support-for-jumbo-frames.patch
deleted file mode 100644
index 5bbf752dbad1..000000000000
--- a/target/linux/lantiq/patches-5.10/0702-v5.16-net-lantiq-add-support-for-jumbo-frames.patch
+++ /dev/null
@@ -1,145 +0,0 @@
-From 998ac358019e491217e752bc6dcbb3afb2a6fa3e Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Sun, 19 Sep 2021 20:24:28 +0200
-Subject: [PATCH] net: lantiq: add support for jumbo frames
-
-Add support for jumbo frames. Full support for jumbo frames requires
-changes in the DSA switch driver (lantiq_gswip.c).
-
-Tested on BT Hone Hub 5A.
-
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/lantiq_xrx200.c | 64 +++++++++++++++++++++++++---
- 1 file changed, 57 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -14,13 +14,15 @@
- #include <linux/clk.h>
- #include <linux/delay.h>
- 
-+#include <linux/if_vlan.h>
-+
- #include <linux/of_net.h>
- #include <linux/of_platform.h>
- 
- #include <xway_dma.h>
- 
- /* DMA */
--#define XRX200_DMA_DATA_LEN	0x600
-+#define XRX200_DMA_DATA_LEN	(SZ_64K - 1)
- #define XRX200_DMA_RX		0
- #define XRX200_DMA_TX		1
- 
-@@ -106,7 +108,8 @@ static void xrx200_flush_dma(struct xrx2
- 			break;
- 
- 		desc->ctl = LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
--			    XRX200_DMA_DATA_LEN;
-+			    (ch->priv->net_dev->mtu + VLAN_ETH_HLEN +
-+			     ETH_FCS_LEN);
- 		ch->dma.desc++;
- 		ch->dma.desc %= LTQ_DESC_NUM;
- 	}
-@@ -154,19 +157,20 @@ static int xrx200_close(struct net_devic
- 
- static int xrx200_alloc_skb(struct xrx200_chan *ch)
- {
-+	int len = ch->priv->net_dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
- 	struct sk_buff *skb = ch->skb[ch->dma.desc];
- 	dma_addr_t mapping;
- 	int ret = 0;
- 
- 	ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev,
--							  XRX200_DMA_DATA_LEN);
-+							  len);
- 	if (!ch->skb[ch->dma.desc]) {
- 		ret = -ENOMEM;
- 		goto skip;
- 	}
- 
- 	mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data,
--				 XRX200_DMA_DATA_LEN, DMA_FROM_DEVICE);
-+				 len, DMA_FROM_DEVICE);
- 	if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) {
- 		dev_kfree_skb_any(ch->skb[ch->dma.desc]);
- 		ch->skb[ch->dma.desc] = skb;
-@@ -179,8 +183,7 @@ static int xrx200_alloc_skb(struct xrx20
- 	wmb();
- skip:
- 	ch->dma.desc_base[ch->dma.desc].ctl =
--		LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
--		XRX200_DMA_DATA_LEN;
-+		LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | len;
- 
- 	return ret;
- }
-@@ -340,10 +343,57 @@ err_drop:
- 	return NETDEV_TX_OK;
- }
- 
-+static int
-+xrx200_change_mtu(struct net_device *net_dev, int new_mtu)
-+{
-+	struct xrx200_priv *priv = netdev_priv(net_dev);
-+	struct xrx200_chan *ch_rx = &priv->chan_rx;
-+	int old_mtu = net_dev->mtu;
-+	bool running = false;
-+	struct sk_buff *skb;
-+	int curr_desc;
-+	int ret = 0;
-+
-+	net_dev->mtu = new_mtu;
-+
-+	if (new_mtu <= old_mtu)
-+		return ret;
-+
-+	running = netif_running(net_dev);
-+	if (running) {
-+		napi_disable(&ch_rx->napi);
-+		ltq_dma_close(&ch_rx->dma);
-+	}
-+
-+	xrx200_poll_rx(&ch_rx->napi, LTQ_DESC_NUM);
-+	curr_desc = ch_rx->dma.desc;
-+
-+	for (ch_rx->dma.desc = 0; ch_rx->dma.desc < LTQ_DESC_NUM;
-+	     ch_rx->dma.desc++) {
-+		skb = ch_rx->skb[ch_rx->dma.desc];
-+		ret = xrx200_alloc_skb(ch_rx);
-+		if (ret) {
-+			net_dev->mtu = old_mtu;
-+			break;
-+		}
-+		dev_kfree_skb_any(skb);
-+	}
-+
-+	ch_rx->dma.desc = curr_desc;
-+	if (running) {
-+		napi_enable(&ch_rx->napi);
-+		ltq_dma_open(&ch_rx->dma);
-+		ltq_dma_enable_irq(&ch_rx->dma);
-+	}
-+
-+	return ret;
-+}
-+
- static const struct net_device_ops xrx200_netdev_ops = {
- 	.ndo_open		= xrx200_open,
- 	.ndo_stop		= xrx200_close,
- 	.ndo_start_xmit		= xrx200_start_xmit,
-+	.ndo_change_mtu		= xrx200_change_mtu,
- 	.ndo_set_mac_address	= eth_mac_addr,
- 	.ndo_validate_addr	= eth_validate_addr,
- };
-@@ -454,7 +504,7 @@ static int xrx200_probe(struct platform_
- 	net_dev->netdev_ops = &xrx200_netdev_ops;
- 	SET_NETDEV_DEV(net_dev, dev);
- 	net_dev->min_mtu = ETH_ZLEN;
--	net_dev->max_mtu = XRX200_DMA_DATA_LEN;
-+	net_dev->max_mtu = XRX200_DMA_DATA_LEN - VLAN_ETH_HLEN - ETH_FCS_LEN;
- 
- 	/* load the memory ranges */
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/target/linux/lantiq/patches-5.10/0703-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch b/target/linux/lantiq/patches-5.10/0703-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch
deleted file mode 100644
index 77c0eb635491..000000000000
--- a/target/linux/lantiq/patches-5.10/0703-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 1488fc204568f707fe2a42a913788c00a95af30e Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Fri, 17 Dec 2021 01:07:40 +0100
-Subject: [PATCH] net: lantiq_xrx200: increase buffer reservation
-
-If the user sets a lower mtu on the CPU port than on the switch,
-then DMA inserts a few more bytes into the buffer than expected.
-In the worst case, it may exceed the size of the buffer. The
-experiments showed that the buffer should be a multiple of the
-burst length value. This patch rounds the length of the rx buffer
-upwards and fixes this bug. The reservation of FCS space in the
-buffer has been removed as PMAC strips the FCS.
-
-Fixes: 998ac358019e ("net: lantiq: add support for jumbo frames")
-Reported-by: Thomas Nixon <tom@tomn.co.uk>
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/lantiq_xrx200.c | 34 ++++++++++++++++++++--------
- 1 file changed, 24 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -70,6 +70,8 @@ struct xrx200_priv {
- 	struct xrx200_chan chan_tx;
- 	struct xrx200_chan chan_rx;
- 
-+	u16 rx_buf_size;
-+
- 	struct net_device *net_dev;
- 	struct device *dev;
- 
-@@ -96,6 +98,16 @@ static void xrx200_pmac_mask(struct xrx2
- 	xrx200_pmac_w32(priv, val, offset);
- }
- 
-+static int xrx200_max_frame_len(int mtu)
-+{
-+	return VLAN_ETH_HLEN + mtu;
-+}
-+
-+static int xrx200_buffer_size(int mtu)
-+{
-+	return round_up(xrx200_max_frame_len(mtu), 4 * XRX200_DMA_BURST_LEN);
-+}
-+
- /* drop all the packets from the DMA ring */
- static void xrx200_flush_dma(struct xrx200_chan *ch)
- {
-@@ -108,8 +120,7 @@ static void xrx200_flush_dma(struct xrx2
- 			break;
- 
- 		desc->ctl = LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
--			    (ch->priv->net_dev->mtu + VLAN_ETH_HLEN +
--			     ETH_FCS_LEN);
-+			    ch->priv->rx_buf_size;
- 		ch->dma.desc++;
- 		ch->dma.desc %= LTQ_DESC_NUM;
- 	}
-@@ -157,21 +168,21 @@ static int xrx200_close(struct net_devic
- 
- static int xrx200_alloc_skb(struct xrx200_chan *ch)
- {
--	int len = ch->priv->net_dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
- 	struct sk_buff *skb = ch->skb[ch->dma.desc];
-+	struct xrx200_priv *priv = ch->priv;
- 	dma_addr_t mapping;
- 	int ret = 0;
- 
--	ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev,
--							  len);
-+	ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(priv->net_dev,
-+							  priv->rx_buf_size);
- 	if (!ch->skb[ch->dma.desc]) {
- 		ret = -ENOMEM;
- 		goto skip;
- 	}
- 
--	mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data,
--				 len, DMA_FROM_DEVICE);
--	if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) {
-+	mapping = dma_map_single(priv->dev, ch->skb[ch->dma.desc]->data,
-+				 priv->rx_buf_size, DMA_FROM_DEVICE);
-+	if (unlikely(dma_mapping_error(priv->dev, mapping))) {
- 		dev_kfree_skb_any(ch->skb[ch->dma.desc]);
- 		ch->skb[ch->dma.desc] = skb;
- 		ret = -ENOMEM;
-@@ -183,7 +194,7 @@ static int xrx200_alloc_skb(struct xrx20
- 	wmb();
- skip:
- 	ch->dma.desc_base[ch->dma.desc].ctl =
--		LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | len;
-+		LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | priv->rx_buf_size;
- 
- 	return ret;
- }
-@@ -355,6 +366,7 @@ xrx200_change_mtu(struct net_device *net
- 	int ret = 0;
- 
- 	net_dev->mtu = new_mtu;
-+	priv->rx_buf_size = xrx200_buffer_size(new_mtu);
- 
- 	if (new_mtu <= old_mtu)
- 		return ret;
-@@ -374,6 +386,7 @@ xrx200_change_mtu(struct net_device *net
- 		ret = xrx200_alloc_skb(ch_rx);
- 		if (ret) {
- 			net_dev->mtu = old_mtu;
-+			priv->rx_buf_size = xrx200_buffer_size(old_mtu);
- 			break;
- 		}
- 		dev_kfree_skb_any(skb);
-@@ -504,7 +517,8 @@ static int xrx200_probe(struct platform_
- 	net_dev->netdev_ops = &xrx200_netdev_ops;
- 	SET_NETDEV_DEV(net_dev, dev);
- 	net_dev->min_mtu = ETH_ZLEN;
--	net_dev->max_mtu = XRX200_DMA_DATA_LEN - VLAN_ETH_HLEN - ETH_FCS_LEN;
-+	net_dev->max_mtu = XRX200_DMA_DATA_LEN - xrx200_max_frame_len(0);
-+	priv->rx_buf_size = xrx200_buffer_size(ETH_DATA_LEN);
- 
- 	/* load the memory ranges */
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/target/linux/lantiq/patches-5.10/0704-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch b/target/linux/lantiq/patches-5.10/0704-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch
deleted file mode 100644
index f2c36952fca6..000000000000
--- a/target/linux/lantiq/patches-5.10/0704-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From c3e6b2c35b34214c58c1e90d65dab5f5393608e7 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Mon, 3 Jan 2022 20:43:16 +0100
-Subject: [PATCH] net: lantiq_xrx200: add ingress SG DMA support
-
-This patch adds support for scatter gather DMA. DMA in PMAC splits
-the packet into several buffers when the MTU on the CPU port is
-less than the MTU of the switch. The first buffer starts at an
-offset of NET_IP_ALIGN. In subsequent buffers, dma ignores the
-offset. Thanks to this patch, the user can still connect to the
-device in such a situation. For normal configurations, the patch
-has no effect on performance.
-
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/lantiq_xrx200.c | 47 +++++++++++++++++++++++-----
- 1 file changed, 40 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -26,6 +26,9 @@
- #define XRX200_DMA_RX		0
- #define XRX200_DMA_TX		1
- 
-+#define XRX200_DMA_PACKET_COMPLETE	0
-+#define XRX200_DMA_PACKET_IN_PROGRESS	1
-+
- /* cpu port mac */
- #define PMAC_RX_IPG		0x0024
- #define PMAC_RX_IPG_MASK	0xf
-@@ -61,6 +64,9 @@ struct xrx200_chan {
- 	struct ltq_dma_channel dma;
- 	struct sk_buff *skb[LTQ_DESC_NUM];
- 
-+	struct sk_buff *skb_head;
-+	struct sk_buff *skb_tail;
-+
- 	struct xrx200_priv *priv;
- };
- 
-@@ -204,7 +210,8 @@ static int xrx200_hw_receive(struct xrx2
- 	struct xrx200_priv *priv = ch->priv;
- 	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
- 	struct sk_buff *skb = ch->skb[ch->dma.desc];
--	int len = (desc->ctl & LTQ_DMA_SIZE_MASK);
-+	u32 ctl = desc->ctl;
-+	int len = (ctl & LTQ_DMA_SIZE_MASK);
- 	struct net_device *net_dev = priv->net_dev;
- 	int ret;
- 
-@@ -220,12 +227,36 @@ static int xrx200_hw_receive(struct xrx2
- 	}
- 
- 	skb_put(skb, len);
--	skb->protocol = eth_type_trans(skb, net_dev);
--	netif_receive_skb(skb);
--	net_dev->stats.rx_packets++;
--	net_dev->stats.rx_bytes += len;
- 
--	return 0;
-+	/* add buffers to skb via skb->frag_list */
-+	if (ctl & LTQ_DMA_SOP) {
-+		ch->skb_head = skb;
-+		ch->skb_tail = skb;
-+	} else if (ch->skb_head) {
-+		if (ch->skb_head == ch->skb_tail)
-+			skb_shinfo(ch->skb_tail)->frag_list = skb;
-+		else
-+			ch->skb_tail->next = skb;
-+		ch->skb_tail = skb;
-+		skb_reserve(ch->skb_tail, -NET_IP_ALIGN);
-+		ch->skb_head->len += skb->len;
-+		ch->skb_head->data_len += skb->len;
-+		ch->skb_head->truesize += skb->truesize;
-+	}
-+
-+	if (ctl & LTQ_DMA_EOP) {
-+		ch->skb_head->protocol = eth_type_trans(ch->skb_head, net_dev);
-+		netif_receive_skb(ch->skb_head);
-+		net_dev->stats.rx_packets++;
-+		net_dev->stats.rx_bytes += ch->skb_head->len;
-+		ch->skb_head = NULL;
-+		ch->skb_tail = NULL;
-+		ret = XRX200_DMA_PACKET_COMPLETE;
-+	} else {
-+		ret = XRX200_DMA_PACKET_IN_PROGRESS;
-+	}
-+
-+	return ret;
- }
- 
- static int xrx200_poll_rx(struct napi_struct *napi, int budget)
-@@ -240,7 +271,9 @@ static int xrx200_poll_rx(struct napi_st
- 
- 		if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
- 			ret = xrx200_hw_receive(ch);
--			if (ret)
-+			if (ret == XRX200_DMA_PACKET_IN_PROGRESS)
-+				continue;
-+			if (ret != XRX200_DMA_PACKET_COMPLETE)
- 				return ret;
- 			rx++;
- 		} else {
diff --git a/target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch b/target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch
deleted file mode 100644
index a69f682c031e..000000000000
--- a/target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch
+++ /dev/null
@@ -1,275 +0,0 @@
-From a09d042b086202735c4ed64573cdd79933020001 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Mon, 22 Mar 2021 21:37:15 +0100
-Subject: [PATCH] net: dsa: lantiq: allow to use all GPHYs on xRX300 and xRX330
-
-This patch allows to use all PHYs on GRX300 and GRX330. The ARX300
-has 3 and the GRX330 has 4 integrated PHYs connected to different
-ports compared to VRX200. Each integrated PHY can work as single
-Gigabit Ethernet PHY (GMII) or as double Fast Ethernet PHY (MII).
-
-Allowed port configurations:
-
-xRX200:
-GMAC0: RGMII, MII, REVMII or RMII port
-GMAC1: RGMII, MII, REVMII or RMII port
-GMAC2: GPHY0 (GMII)
-GMAC3: GPHY0 (MII)
-GMAC4: GPHY1 (GMII)
-GMAC5: GPHY1 (MII) or RGMII port
-
-xRX300:
-GMAC0: RGMII port
-GMAC1: GPHY2 (GMII)
-GMAC2: GPHY0 (GMII)
-GMAC3: GPHY0 (MII)
-GMAC4: GPHY1 (GMII)
-GMAC5: GPHY1 (MII) or RGMII port
-
-xRX330:
-GMAC0: RGMII, GMII or RMII port
-GMAC1: GPHY2 (GMII)
-GMAC2: GPHY0 (GMII)
-GMAC3: GPHY0 (MII) or GPHY3 (GMII)
-GMAC4: GPHY1 (GMII)
-GMAC5: GPHY1 (MII), RGMII or RMII port
-
-Tested on D-Link DWR966 (xRX330) with OpenWRT.
-
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/lantiq_gswip.c | 142 ++++++++++++++++++++++++++-------
- 1 file changed, 113 insertions(+), 29 deletions(-)
-
---- a/drivers/net/dsa/lantiq_gswip.c
-+++ b/drivers/net/dsa/lantiq_gswip.c
-@@ -1,6 +1,6 @@
- // SPDX-License-Identifier: GPL-2.0
- /*
-- * Lantiq / Intel GSWIP switch driver for VRX200 SoCs
-+ * Lantiq / Intel GSWIP switch driver for VRX200, xRX300 and xRX330 SoCs
-  *
-  * Copyright (C) 2010 Lantiq Deutschland
-  * Copyright (C) 2012 John Crispin <john@phrozen.org>
-@@ -104,6 +104,7 @@
- #define  GSWIP_MII_CFG_MODE_RMIIP	0x2
- #define  GSWIP_MII_CFG_MODE_RMIIM	0x3
- #define  GSWIP_MII_CFG_MODE_RGMII	0x4
-+#define  GSWIP_MII_CFG_MODE_GMII	0x9
- #define  GSWIP_MII_CFG_MODE_MASK	0xf
- #define  GSWIP_MII_CFG_RATE_M2P5	0x00
- #define  GSWIP_MII_CFG_RATE_M25	0x10
-@@ -241,6 +242,7 @@
- struct gswip_hw_info {
- 	int max_ports;
- 	int cpu_port;
-+	const struct dsa_switch_ops *ops;
- };
- 
- struct xway_gphy_match_data {
-@@ -1438,12 +1440,42 @@ static int gswip_port_fdb_dump(struct ds
- 	return 0;
- }
- 
--static void gswip_phylink_validate(struct dsa_switch *ds, int port,
--				   unsigned long *supported,
--				   struct phylink_link_state *state)
-+static void gswip_phylink_set_capab(unsigned long *supported,
-+				    struct phylink_link_state *state)
- {
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
- 
-+	/* Allow all the expected bits */
-+	phylink_set(mask, Autoneg);
-+	phylink_set_port_modes(mask);
-+	phylink_set(mask, Pause);
-+	phylink_set(mask, Asym_Pause);
-+
-+	/* With the exclusion of MII, Reverse MII and Reduced MII, we
-+	 * support Gigabit, including Half duplex
-+	 */
-+	if (state->interface != PHY_INTERFACE_MODE_MII &&
-+	    state->interface != PHY_INTERFACE_MODE_REVMII &&
-+	    state->interface != PHY_INTERFACE_MODE_RMII) {
-+		phylink_set(mask, 1000baseT_Full);
-+		phylink_set(mask, 1000baseT_Half);
-+	}
-+
-+	phylink_set(mask, 10baseT_Half);
-+	phylink_set(mask, 10baseT_Full);
-+	phylink_set(mask, 100baseT_Half);
-+	phylink_set(mask, 100baseT_Full);
-+
-+	bitmap_and(supported, supported, mask,
-+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
-+	bitmap_and(state->advertising, state->advertising, mask,
-+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
-+}
-+
-+static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port,
-+					  unsigned long *supported,
-+					  struct phylink_link_state *state)
-+{
- 	switch (port) {
- 	case 0:
- 	case 1:
-@@ -1470,38 +1502,54 @@ static void gswip_phylink_validate(struc
- 		return;
- 	}
- 
--	/* Allow all the expected bits */
--	phylink_set(mask, Autoneg);
--	phylink_set_port_modes(mask);
--	phylink_set(mask, Pause);
--	phylink_set(mask, Asym_Pause);
-+	gswip_phylink_set_capab(supported, state);
- 
--	/* With the exclusion of MII, Reverse MII and Reduced MII, we
--	 * support Gigabit, including Half duplex
--	 */
--	if (state->interface != PHY_INTERFACE_MODE_MII &&
--	    state->interface != PHY_INTERFACE_MODE_REVMII &&
--	    state->interface != PHY_INTERFACE_MODE_RMII) {
--		phylink_set(mask, 1000baseT_Full);
--		phylink_set(mask, 1000baseT_Half);
-+	return;
-+
-+unsupported:
-+	bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-+	dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
-+		phy_modes(state->interface), port);
-+}
-+
-+static void gswip_xrx300_phylink_validate(struct dsa_switch *ds, int port,
-+					  unsigned long *supported,
-+					  struct phylink_link_state *state)
-+{
-+	switch (port) {
-+	case 0:
-+		if (!phy_interface_mode_is_rgmii(state->interface) &&
-+		    state->interface != PHY_INTERFACE_MODE_GMII &&
-+		    state->interface != PHY_INTERFACE_MODE_RMII)
-+			goto unsupported;
-+		break;
-+	case 1:
-+	case 2:
-+	case 3:
-+	case 4:
-+		if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
-+			goto unsupported;
-+		break;
-+	case 5:
-+		if (!phy_interface_mode_is_rgmii(state->interface) &&
-+		    state->interface != PHY_INTERFACE_MODE_INTERNAL &&
-+		    state->interface != PHY_INTERFACE_MODE_RMII)
-+			goto unsupported;
-+		break;
-+	default:
-+		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-+		dev_err(ds->dev, "Unsupported port: %i\n", port);
-+		return;
- 	}
- 
--	phylink_set(mask, 10baseT_Half);
--	phylink_set(mask, 10baseT_Full);
--	phylink_set(mask, 100baseT_Half);
--	phylink_set(mask, 100baseT_Full);
-+	gswip_phylink_set_capab(supported, state);
- 
--	bitmap_and(supported, supported, mask,
--		   __ETHTOOL_LINK_MODE_MASK_NBITS);
--	bitmap_and(state->advertising, state->advertising, mask,
--		   __ETHTOOL_LINK_MODE_MASK_NBITS);
- 	return;
- 
- unsupported:
- 	bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
- 	dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
- 		phy_modes(state->interface), port);
--	return;
- }
- 
- static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link)
-@@ -1636,6 +1684,9 @@ static void gswip_phylink_mac_config(str
- 	case PHY_INTERFACE_MODE_RGMII_TXID:
- 		miicfg |= GSWIP_MII_CFG_MODE_RGMII;
- 		break;
-+	case PHY_INTERFACE_MODE_GMII:
-+		miicfg |= GSWIP_MII_CFG_MODE_GMII;
-+		break;
- 	default:
- 		dev_err(ds->dev,
- 			"Unsupported interface: %d\n", state->interface);
-@@ -1762,7 +1813,7 @@ static int gswip_get_sset_count(struct d
- 	return ARRAY_SIZE(gswip_rmon_cnt);
- }
- 
--static const struct dsa_switch_ops gswip_switch_ops = {
-+static const struct dsa_switch_ops gswip_xrx200_switch_ops = {
- 	.get_tag_protocol	= gswip_get_tag_protocol,
- 	.setup			= gswip_setup,
- 	.port_enable		= gswip_port_enable,
-@@ -1778,7 +1829,31 @@ static const struct dsa_switch_ops gswip
- 	.port_fdb_add		= gswip_port_fdb_add,
- 	.port_fdb_del		= gswip_port_fdb_del,
- 	.port_fdb_dump		= gswip_port_fdb_dump,
--	.phylink_validate	= gswip_phylink_validate,
-+	.phylink_validate	= gswip_xrx200_phylink_validate,
-+	.phylink_mac_config	= gswip_phylink_mac_config,
-+	.phylink_mac_link_down	= gswip_phylink_mac_link_down,
-+	.phylink_mac_link_up	= gswip_phylink_mac_link_up,
-+	.get_strings		= gswip_get_strings,
-+	.get_ethtool_stats	= gswip_get_ethtool_stats,
-+	.get_sset_count		= gswip_get_sset_count,
-+};
-+
-+static const struct dsa_switch_ops gswip_xrx300_switch_ops = {
-+	.get_tag_protocol	= gswip_get_tag_protocol,
-+	.setup			= gswip_setup,
-+	.port_enable		= gswip_port_enable,
-+	.port_disable		= gswip_port_disable,
-+	.port_bridge_join	= gswip_port_bridge_join,
-+	.port_bridge_leave	= gswip_port_bridge_leave,
-+	.port_fast_age		= gswip_port_fast_age,
-+	.port_vlan_filtering	= gswip_port_vlan_filtering,
-+	.port_vlan_add		= gswip_port_vlan_add,
-+	.port_vlan_del		= gswip_port_vlan_del,
-+	.port_stp_state_set	= gswip_port_stp_state_set,
-+	.port_fdb_add		= gswip_port_fdb_add,
-+	.port_fdb_del		= gswip_port_fdb_del,
-+	.port_fdb_dump		= gswip_port_fdb_dump,
-+	.phylink_validate	= gswip_xrx300_phylink_validate,
- 	.phylink_mac_config	= gswip_phylink_mac_config,
- 	.phylink_mac_link_down	= gswip_phylink_mac_link_down,
- 	.phylink_mac_link_up	= gswip_phylink_mac_link_up,
-@@ -2042,7 +2117,7 @@ static int gswip_probe(struct platform_d
- 	priv->ds->dev = dev;
- 	priv->ds->num_ports = priv->hw_info->max_ports;
- 	priv->ds->priv = priv;
--	priv->ds->ops = &gswip_switch_ops;
-+	priv->ds->ops = priv->hw_info->ops;
- 	priv->dev = dev;
- 	version = gswip_switch_r(priv, GSWIP_VERSION);
- 
-@@ -2126,10 +2201,19 @@ static int gswip_remove(struct platform_
- static const struct gswip_hw_info gswip_xrx200 = {
- 	.max_ports = 7,
- 	.cpu_port = 6,
-+	.ops = &gswip_xrx200_switch_ops,
-+};
-+
-+static const struct gswip_hw_info gswip_xrx300 = {
-+	.max_ports = 7,
-+	.cpu_port = 6,
-+	.ops = &gswip_xrx300_switch_ops,
- };
- 
- static const struct of_device_id gswip_of_match[] = {
- 	{ .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 },
-+	{ .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 },
-+	{ .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, gswip_of_match);
diff --git a/target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch b/target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch
deleted file mode 100644
index 49a19bebeea0..000000000000
--- a/target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From c40bb4fedcd6b8b6a714da5dd466eb88ed2652d1 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Wed, 9 Mar 2022 00:04:57 +0100
-Subject: net: dsa: lantiq_gswip: enable jumbo frames on GSWIP
-
-This enables non-standard MTUs on a per-port basis, with the overall
-frame size set based on the CPU port.
-
-When the MTU is not changed, this should have no effect.
-
-Long packets crash the switch with MTUs of greater than 2526, so the
-maximum is limited for now. Medium packets are sometimes dropped (e.g.
-TCP over 2477, UDP over 2516-2519, ICMP over 2526), Hence an MTU value
-of 2400 seems safe.
-
-Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Link: https://lore.kernel.org/r/20220308230457.1599237-1-olek2@wp.pl
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/lantiq_gswip.c | 53 ++++++++++++++++++++++++++++++++++++++----
- 1 file changed, 49 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/lantiq_gswip.c
-+++ b/drivers/net/dsa/lantiq_gswip.c
-@@ -213,6 +213,7 @@
- #define  GSWIP_MAC_CTRL_0_GMII_MII	0x0001
- #define  GSWIP_MAC_CTRL_0_GMII_RGMII	0x0002
- #define GSWIP_MAC_CTRL_2p(p)		(0x905 + ((p) * 0xC))
-+#define GSWIP_MAC_CTRL_2_LCHKL		BIT(2) /* Frame Length Check Long Enable */
- #define GSWIP_MAC_CTRL_2_MLEN		BIT(3) /* Maximum Untagged Frame Lnegth */
- 
- /* Ethernet Switch Fetch DMA Port Control Register */
-@@ -239,6 +240,15 @@
- 
- #define XRX200_GPHY_FW_ALIGN	(16 * 1024)
- 
-+/* Maximum packet size supported by the switch. In theory this should be 10240,
-+ * but long packets currently cause lock-ups with an MTU of over 2526. Medium
-+ * packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP
-+ * over 2526), hence an MTU value of 2400 seems safe. This issue only affects
-+ * packet reception. This is probably caused by the PPA engine, which is on the
-+ * RX part of the device. Packet transmission works properly up to 10240.
-+ */
-+#define GSWIP_MAX_PACKET_LENGTH	2400
-+
- struct gswip_hw_info {
- 	int max_ports;
- 	int cpu_port;
-@@ -858,10 +868,6 @@ static int gswip_setup(struct dsa_switch
- 	gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS,
- 			  GSWIP_PCE_PCTRL_0p(cpu_port));
- 
--	gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN,
--			  GSWIP_MAC_CTRL_2p(cpu_port));
--	gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8 + ETH_FCS_LEN,
--		       GSWIP_MAC_FLEN);
- 	gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD,
- 			  GSWIP_BM_QUEUE_GCTRL);
- 
-@@ -878,6 +884,8 @@ static int gswip_setup(struct dsa_switch
- 		return err;
- 	}
- 
-+	ds->mtu_enforcement_ingress = true;
-+
- 	gswip_port_enable(ds, cpu_port, NULL);
- 	return 0;
- }
-@@ -1472,6 +1480,39 @@ static void gswip_phylink_set_capab(unsi
- 		   __ETHTOOL_LINK_MODE_MASK_NBITS);
- }
- 
-+static int gswip_port_max_mtu(struct dsa_switch *ds, int port)
-+{
-+	/* Includes 8 bytes for special header. */
-+	return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN;
-+}
-+
-+static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
-+{
-+	struct gswip_priv *priv = ds->priv;
-+	int cpu_port = priv->hw_info->cpu_port;
-+
-+	/* CPU port always has maximum mtu of user ports, so use it to set
-+	 * switch frame size, including 8 byte special header.
-+	 */
-+	if (port == cpu_port) {
-+		new_mtu += 8;
-+		gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN,
-+			       GSWIP_MAC_FLEN);
-+	}
-+
-+	/* Enable MLEN for ports with non-standard MTUs, including the special
-+	 * header on the CPU port added above.
-+	 */
-+	if (new_mtu != ETH_DATA_LEN)
-+		gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN,
-+				  GSWIP_MAC_CTRL_2p(port));
-+	else
-+		gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0,
-+				  GSWIP_MAC_CTRL_2p(port));
-+
-+	return 0;
-+}
-+
- static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port,
- 					  unsigned long *supported,
- 					  struct phylink_link_state *state)
-@@ -1829,6 +1870,8 @@ static const struct dsa_switch_ops gswip
- 	.port_fdb_add		= gswip_port_fdb_add,
- 	.port_fdb_del		= gswip_port_fdb_del,
- 	.port_fdb_dump		= gswip_port_fdb_dump,
-+	.port_change_mtu	= gswip_port_change_mtu,
-+	.port_max_mtu		= gswip_port_max_mtu,
- 	.phylink_validate	= gswip_xrx200_phylink_validate,
- 	.phylink_mac_config	= gswip_phylink_mac_config,
- 	.phylink_mac_link_down	= gswip_phylink_mac_link_down,
-@@ -1853,6 +1896,8 @@ static const struct dsa_switch_ops gswip
- 	.port_fdb_add		= gswip_port_fdb_add,
- 	.port_fdb_del		= gswip_port_fdb_del,
- 	.port_fdb_dump		= gswip_port_fdb_dump,
-+	.port_change_mtu	= gswip_port_change_mtu,
-+	.port_max_mtu		= gswip_port_max_mtu,
- 	.phylink_validate	= gswip_xrx300_phylink_validate,
- 	.phylink_mac_config	= gswip_phylink_mac_config,
- 	.phylink_mac_link_down	= gswip_phylink_mac_link_down,
diff --git a/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch b/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch
deleted file mode 100644
index 4fb7d0767b1d..000000000000
--- a/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From 14d4e308e0aa0b78dc7a059716861a4380de3535 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Tue, 14 Sep 2021 23:21:02 +0200
-Subject: [PATCH 5/5] net: lantiq: configure the burst length in ethernet
- drivers
-
-Configure the burst length in Ethernet drivers. This improves
-Ethernet performance by 58%. According to the vendor BSP,
-8W burst length is supported by ar9 and newer SoCs.
-
-The NAT benchmark results on xRX200 (Down/Up):
-* 2W: 330 Mb/s
-* 4W: 432 Mb/s    372 Mb/s
-* 8W: 520 Mb/s    389 Mb/s
-
-Tested on xRX200 and xRX330.
-
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/lantiq_etop.c   | 21 ++++++++++++++++++---
- drivers/net/ethernet/lantiq_xrx200.c | 21 ++++++++++++++++++---
- 2 files changed, 36 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -148,6 +148,9 @@ struct ltq_etop_priv {
- 	struct ltq_etop_chan txch;
- 	struct ltq_etop_chan rxch;
- 
-+	int tx_burst_len;
-+	int rx_burst_len;
-+
- 	int tx_irq;
- 	int rx_irq;
- 
-@@ -399,7 +402,7 @@ ltq_etop_dma_init(struct net_device *dev
- 	int rx = priv->rx_irq - LTQ_DMA_ETOP;
- 	int err;
- 
--	ltq_dma_init_port(DMA_PORT_ETOP);
-+	ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, rx_burst_len);
- 
- 	priv->txch.dma.nr = tx;
- 	priv->txch.dma.dev = &priv->pdev->dev;
-@@ -676,8 +679,8 @@ ltq_etop_tx(struct sk_buff *skb, struct
- 		return NETDEV_TX_BUSY;
- 	}
- 
--	/* dma needs to start on a 16 byte aligned address */
--	byte_offset = CPHYSADDR(skb->data) % 16;
-+	/* dma needs to start on a burst length value aligned address */
-+	byte_offset = CPHYSADDR(skb->data) % (priv->tx_burst_len * 4);
- 	priv->txch.skb[priv->txch.dma.desc] = skb;
- 
- 	netif_trans_update(dev);
-@@ -925,6 +928,18 @@ static int ltq_etop_probe(struct platfor
- 	spin_lock_init(&priv->lock);
- 	SET_NETDEV_DEV(dev, &pdev->dev);
- 
-+	err = device_property_read_u32(&pdev->dev, "lantiq,tx-burst-length", &priv->tx_burst_len);
-+	if (err < 0) {
-+		dev_err(&pdev->dev, "unable to read tx-burst-length property\n");
-+		return err;
-+	}
-+
-+	err = device_property_read_u32(&pdev->dev, "lantiq,rx-burst-length", &priv->rx_burst_len);
-+	if (err < 0) {
-+		dev_err(&pdev->dev, "unable to read rx-burst-length property\n");
-+		return err;
-+	}
-+
- 	netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
- 	netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
- 	priv->txch.netdev = dev;
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -81,6 +81,9 @@ struct xrx200_priv {
- 	struct net_device *net_dev;
- 	struct device *dev;
- 
-+	int tx_burst_len;
-+	int rx_burst_len;
-+
- 	__iomem void *pmac_reg;
- };
- 
-@@ -363,8 +366,8 @@ static netdev_tx_t xrx200_start_xmit(str
- 	if (unlikely(dma_mapping_error(priv->dev, mapping)))
- 		goto err_drop;
- 
--	/* dma needs to start on a 16 byte aligned address */
--	byte_offset = mapping % 16;
-+	/* dma needs to start on a burst length value aligned address */
-+	byte_offset = mapping % (priv->tx_burst_len * 4);
- 
- 	desc->addr = mapping - byte_offset;
- 	/* Make sure the address is written before we give it to HW */
-@@ -465,7 +468,7 @@ static int xrx200_dma_init(struct xrx200
- 	int ret = 0;
- 	int i;
- 
--	ltq_dma_init_port(DMA_PORT_ETOP);
-+	ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, rx_burst_len);
- 
- 	ch_rx->dma.nr = XRX200_DMA_RX;
- 	ch_rx->dma.dev = priv->dev;
-@@ -584,6 +587,18 @@ static int xrx200_probe(struct platform_
- 	if (err)
- 		eth_hw_addr_random(net_dev);
- 
-+	err = device_property_read_u32(dev, "lantiq,tx-burst-length", &priv->tx_burst_len);
-+	if (err < 0) {
-+		dev_err(dev, "unable to read tx-burst-length property\n");
-+		return err;
-+	}
-+
-+	err = device_property_read_u32(dev, "lantiq,rx-burst-length", &priv->rx_burst_len);
-+	if (err < 0) {
-+		dev_err(dev, "unable to read rx-burst-length property\n");
-+		return err;
-+	}
-+
- 	/* bring up the dma engine and IP core */
- 	err = xrx200_dma_init(priv);
- 	if (err)
diff --git a/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch b/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch
deleted file mode 100644
index 7448af8c2655..000000000000
--- a/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 7e553c44f09a8f536090904c6db5b8c9dbafa03b Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Tue, 26 Oct 2021 22:59:01 +0200
-Subject: [PATCH] net: lantiq_xrx200: Hardcode the burst length value
-
-All SoCs with this IP core support 8 burst length. Hauke
-suggested to hardcode this value and simplify the driver.
-
-Link: https://lkml.org/lkml/2021/9/14/1533
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/lantiq_xrx200.c | 21 ++++-----------------
- 1 file changed, 4 insertions(+), 17 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -25,6 +25,7 @@
- #define XRX200_DMA_DATA_LEN	(SZ_64K - 1)
- #define XRX200_DMA_RX		0
- #define XRX200_DMA_TX		1
-+#define XRX200_DMA_BURST_LEN	8
- 
- #define XRX200_DMA_PACKET_COMPLETE	0
- #define XRX200_DMA_PACKET_IN_PROGRESS	1
-@@ -81,9 +82,6 @@ struct xrx200_priv {
- 	struct net_device *net_dev;
- 	struct device *dev;
- 
--	int tx_burst_len;
--	int rx_burst_len;
--
- 	__iomem void *pmac_reg;
- };
- 
-@@ -367,7 +365,7 @@ static netdev_tx_t xrx200_start_xmit(str
- 		goto err_drop;
- 
- 	/* dma needs to start on a burst length value aligned address */
--	byte_offset = mapping % (priv->tx_burst_len * 4);
-+	byte_offset = mapping % (XRX200_DMA_BURST_LEN * 4);
- 
- 	desc->addr = mapping - byte_offset;
- 	/* Make sure the address is written before we give it to HW */
-@@ -468,7 +466,8 @@ static int xrx200_dma_init(struct xrx200
- 	int ret = 0;
- 	int i;
- 
--	ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, rx_burst_len);
-+	ltq_dma_init_port(DMA_PORT_ETOP, XRX200_DMA_BURST_LEN,
-+			  XRX200_DMA_BURST_LEN);
- 
- 	ch_rx->dma.nr = XRX200_DMA_RX;
- 	ch_rx->dma.dev = priv->dev;
-@@ -587,18 +586,6 @@ static int xrx200_probe(struct platform_
- 	if (err)
- 		eth_hw_addr_random(net_dev);
- 
--	err = device_property_read_u32(dev, "lantiq,tx-burst-length", &priv->tx_burst_len);
--	if (err < 0) {
--		dev_err(dev, "unable to read tx-burst-length property\n");
--		return err;
--	}
--
--	err = device_property_read_u32(dev, "lantiq,rx-burst-length", &priv->rx_burst_len);
--	if (err < 0) {
--		dev_err(dev, "unable to read rx-burst-length property\n");
--		return err;
--	}
--
- 	/* bring up the dma engine and IP core */
- 	err = xrx200_dma_init(priv);
- 	if (err)
diff --git a/target/linux/lantiq/patches-5.10/0712-v5.16-net-ethernet-lantiq_etop-Fix-compilation-error.patch b/target/linux/lantiq/patches-5.10/0712-v5.16-net-ethernet-lantiq_etop-Fix-compilation-error.patch
deleted file mode 100644
index 06f4bc2eeed8..000000000000
--- a/target/linux/lantiq/patches-5.10/0712-v5.16-net-ethernet-lantiq_etop-Fix-compilation-error.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 68eabc348148ae051631e8dab13c3b1a85c82896 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Tue, 9 Nov 2021 23:23:54 +0100
-Subject: [PATCH] net: ethernet: lantiq_etop: Fix compilation error
-
-This fixes the error detected when compiling the driver.
-
-Fixes: 14d4e308e0aa ("net: lantiq: configure the burst length in ethernet drivers")
-Reported-by: kernel test robot <lkp@intel.com>
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/lantiq_etop.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -402,7 +402,7 @@ ltq_etop_dma_init(struct net_device *dev
- 	int rx = priv->rx_irq - LTQ_DMA_ETOP;
- 	int err;
- 
--	ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, rx_burst_len);
-+	ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, priv->rx_burst_len);
- 
- 	priv->txch.dma.nr = tx;
- 	priv->txch.dma.dev = &priv->pdev->dev;
diff --git a/target/linux/lantiq/patches-5.10/0713-v5.17-MIPS-lantiq-dma-increase-descritor-count.patch b/target/linux/lantiq/patches-5.10/0713-v5.17-MIPS-lantiq-dma-increase-descritor-count.patch
deleted file mode 100644
index 37ed1d4f3171..000000000000
--- a/target/linux/lantiq/patches-5.10/0713-v5.17-MIPS-lantiq-dma-increase-descritor-count.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 5112e9234bbb89f8dd15c983206bd9107b8436d5 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Tue, 4 Jan 2022 16:11:42 +0100
-Subject: [PATCH 713/715] MIPS: lantiq: dma: increase descritor count
-
-NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500):
-
-	Down		Up
-Before	539 Mbps	599 Mbps
-After	545 Mbps	625 Mbps
-
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- arch/mips/include/asm/mach-lantiq/xway/xway_dma.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
-@@ -8,7 +8,7 @@
- #define LTQ_DMA_H__
- 
- #define LTQ_DESC_SIZE		0x08	/* each descriptor is 64bit */
--#define LTQ_DESC_NUM		0x40	/* 64 descriptors / channel */
-+#define LTQ_DESC_NUM		0xC0	/* 192 descriptors / channel */
- 
- #define LTQ_DMA_OWN		BIT(31) /* owner bit */
- #define LTQ_DMA_C		BIT(30) /* complete bit */
diff --git a/target/linux/lantiq/patches-5.10/0714-v5.17-net-lantiq_xrx200-increase-napi-poll-weigth.patch b/target/linux/lantiq/patches-5.10/0714-v5.17-net-lantiq_xrx200-increase-napi-poll-weigth.patch
deleted file mode 100644
index 1fa49f406e58..000000000000
--- a/target/linux/lantiq/patches-5.10/0714-v5.17-net-lantiq_xrx200-increase-napi-poll-weigth.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 768818d772d5d4ddc0c7eb2e62848929270ab7a3 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Tue, 4 Jan 2022 16:11:43 +0100
-Subject: [PATCH 714/715] net: lantiq_xrx200: increase napi poll weigth
-
-NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500):
-
-	Down		Up
-Before	545 Mbps	625 Mbps
-After	577 Mbps	648 Mbps
-
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/lantiq_xrx200.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -606,8 +606,10 @@ static int xrx200_probe(struct platform_
- 			 PMAC_HD_CTL);
- 
- 	/* setup NAPI */
--	netif_napi_add(net_dev, &priv->chan_rx.napi, xrx200_poll_rx, 32);
--	netif_tx_napi_add(net_dev, &priv->chan_tx.napi, xrx200_tx_housekeeping, 32);
-+	netif_napi_add(net_dev, &priv->chan_rx.napi, xrx200_poll_rx,
-+		       NAPI_POLL_WEIGHT);
-+	netif_tx_napi_add(net_dev, &priv->chan_tx.napi, xrx200_tx_housekeeping,
-+			  NAPI_POLL_WEIGHT);
- 
- 	platform_set_drvdata(pdev, priv);
- 
diff --git a/target/linux/lantiq/patches-5.10/0715-v5.17-net-lantiq_xrx200-convert-to-build_skb.patch b/target/linux/lantiq/patches-5.10/0715-v5.17-net-lantiq_xrx200-convert-to-build_skb.patch
deleted file mode 100644
index b2b014832c68..000000000000
--- a/target/linux/lantiq/patches-5.10/0715-v5.17-net-lantiq_xrx200-convert-to-build_skb.patch
+++ /dev/null
@@ -1,206 +0,0 @@
-From e015593573b3e3f74bd8a63c05fa92902194a354 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Tue, 4 Jan 2022 16:11:44 +0100
-Subject: [PATCH 715/715] net: lantiq_xrx200: convert to build_skb
-
-We can increase the efficiency of rx path by using buffers to receive
-packets then build SKBs around them just before passing into the network
-stack. In contrast, preallocating SKBs too early reduces CPU cache
-efficiency.
-
-NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500):
-
-	Down		Up
-Before	577 Mbps	648 Mbps
-After	624 Mbps	695 Mbps
-
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/lantiq_xrx200.c | 56 ++++++++++++++++++----------
- 1 file changed, 36 insertions(+), 20 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -63,7 +63,11 @@ struct xrx200_chan {
- 
- 	struct napi_struct napi;
- 	struct ltq_dma_channel dma;
--	struct sk_buff *skb[LTQ_DESC_NUM];
-+
-+	union {
-+		struct sk_buff *skb[LTQ_DESC_NUM];
-+		void *rx_buff[LTQ_DESC_NUM];
-+	};
- 
- 	struct sk_buff *skb_head;
- 	struct sk_buff *skb_tail;
-@@ -78,6 +82,7 @@ struct xrx200_priv {
- 	struct xrx200_chan chan_rx;
- 
- 	u16 rx_buf_size;
-+	u16 rx_skb_size;
- 
- 	struct net_device *net_dev;
- 	struct device *dev;
-@@ -115,6 +120,12 @@ static int xrx200_buffer_size(int mtu)
- 	return round_up(xrx200_max_frame_len(mtu), 4 * XRX200_DMA_BURST_LEN);
- }
- 
-+static int xrx200_skb_size(u16 buf_size)
-+{
-+	return SKB_DATA_ALIGN(buf_size + NET_SKB_PAD + NET_IP_ALIGN) +
-+		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-+}
-+
- /* drop all the packets from the DMA ring */
- static void xrx200_flush_dma(struct xrx200_chan *ch)
- {
-@@ -173,30 +184,29 @@ static int xrx200_close(struct net_devic
- 	return 0;
- }
- 
--static int xrx200_alloc_skb(struct xrx200_chan *ch)
-+static int xrx200_alloc_buf(struct xrx200_chan *ch, void *(*alloc)(unsigned int size))
- {
--	struct sk_buff *skb = ch->skb[ch->dma.desc];
-+	void *buf = ch->rx_buff[ch->dma.desc];
- 	struct xrx200_priv *priv = ch->priv;
- 	dma_addr_t mapping;
- 	int ret = 0;
- 
--	ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(priv->net_dev,
--							  priv->rx_buf_size);
--	if (!ch->skb[ch->dma.desc]) {
-+	ch->rx_buff[ch->dma.desc] = alloc(priv->rx_skb_size);
-+	if (!ch->rx_buff[ch->dma.desc]) {
- 		ret = -ENOMEM;
- 		goto skip;
- 	}
- 
--	mapping = dma_map_single(priv->dev, ch->skb[ch->dma.desc]->data,
-+	mapping = dma_map_single(priv->dev, ch->rx_buff[ch->dma.desc],
- 				 priv->rx_buf_size, DMA_FROM_DEVICE);
- 	if (unlikely(dma_mapping_error(priv->dev, mapping))) {
--		dev_kfree_skb_any(ch->skb[ch->dma.desc]);
--		ch->skb[ch->dma.desc] = skb;
-+		skb_free_frag(ch->rx_buff[ch->dma.desc]);
-+		ch->rx_buff[ch->dma.desc] = buf;
- 		ret = -ENOMEM;
- 		goto skip;
- 	}
- 
--	ch->dma.desc_base[ch->dma.desc].addr = mapping;
-+	ch->dma.desc_base[ch->dma.desc].addr = mapping + NET_SKB_PAD + NET_IP_ALIGN;
- 	/* Make sure the address is written before we give it to HW */
- 	wmb();
- skip:
-@@ -210,13 +220,14 @@ static int xrx200_hw_receive(struct xrx2
- {
- 	struct xrx200_priv *priv = ch->priv;
- 	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
--	struct sk_buff *skb = ch->skb[ch->dma.desc];
-+	void *buf = ch->rx_buff[ch->dma.desc];
- 	u32 ctl = desc->ctl;
- 	int len = (ctl & LTQ_DMA_SIZE_MASK);
- 	struct net_device *net_dev = priv->net_dev;
-+	struct sk_buff *skb;
- 	int ret;
- 
--	ret = xrx200_alloc_skb(ch);
-+	ret = xrx200_alloc_buf(ch, napi_alloc_frag);
- 
- 	ch->dma.desc++;
- 	ch->dma.desc %= LTQ_DESC_NUM;
-@@ -227,19 +238,21 @@ static int xrx200_hw_receive(struct xrx2
- 		return ret;
- 	}
- 
-+	skb = build_skb(buf, priv->rx_skb_size);
-+	skb_reserve(skb, NET_SKB_PAD);
- 	skb_put(skb, len);
- 
- 	/* add buffers to skb via skb->frag_list */
- 	if (ctl & LTQ_DMA_SOP) {
- 		ch->skb_head = skb;
- 		ch->skb_tail = skb;
-+		skb_reserve(skb, NET_IP_ALIGN);
- 	} else if (ch->skb_head) {
- 		if (ch->skb_head == ch->skb_tail)
- 			skb_shinfo(ch->skb_tail)->frag_list = skb;
- 		else
- 			ch->skb_tail->next = skb;
- 		ch->skb_tail = skb;
--		skb_reserve(ch->skb_tail, -NET_IP_ALIGN);
- 		ch->skb_head->len += skb->len;
- 		ch->skb_head->data_len += skb->len;
- 		ch->skb_head->truesize += skb->truesize;
-@@ -395,12 +408,13 @@ xrx200_change_mtu(struct net_device *net
- 	struct xrx200_chan *ch_rx = &priv->chan_rx;
- 	int old_mtu = net_dev->mtu;
- 	bool running = false;
--	struct sk_buff *skb;
-+	void *buff;
- 	int curr_desc;
- 	int ret = 0;
- 
- 	net_dev->mtu = new_mtu;
- 	priv->rx_buf_size = xrx200_buffer_size(new_mtu);
-+	priv->rx_skb_size = xrx200_skb_size(priv->rx_buf_size);
- 
- 	if (new_mtu <= old_mtu)
- 		return ret;
-@@ -416,14 +430,15 @@ xrx200_change_mtu(struct net_device *net
- 
- 	for (ch_rx->dma.desc = 0; ch_rx->dma.desc < LTQ_DESC_NUM;
- 	     ch_rx->dma.desc++) {
--		skb = ch_rx->skb[ch_rx->dma.desc];
--		ret = xrx200_alloc_skb(ch_rx);
-+		buff = ch_rx->rx_buff[ch_rx->dma.desc];
-+		ret = xrx200_alloc_buf(ch_rx, netdev_alloc_frag);
- 		if (ret) {
- 			net_dev->mtu = old_mtu;
- 			priv->rx_buf_size = xrx200_buffer_size(old_mtu);
-+			priv->rx_skb_size = xrx200_skb_size(priv->rx_buf_size);
- 			break;
- 		}
--		dev_kfree_skb_any(skb);
-+		skb_free_frag(buff);
- 	}
- 
- 	ch_rx->dma.desc = curr_desc;
-@@ -476,7 +491,7 @@ static int xrx200_dma_init(struct xrx200
- 	ltq_dma_alloc_rx(&ch_rx->dma);
- 	for (ch_rx->dma.desc = 0; ch_rx->dma.desc < LTQ_DESC_NUM;
- 	     ch_rx->dma.desc++) {
--		ret = xrx200_alloc_skb(ch_rx);
-+		ret = xrx200_alloc_buf(ch_rx, netdev_alloc_frag);
- 		if (ret)
- 			goto rx_free;
- 	}
-@@ -511,7 +526,7 @@ rx_ring_free:
- 	/* free the allocated RX ring */
- 	for (i = 0; i < LTQ_DESC_NUM; i++) {
- 		if (priv->chan_rx.skb[i])
--			dev_kfree_skb_any(priv->chan_rx.skb[i]);
-+			skb_free_frag(priv->chan_rx.rx_buff[i]);
- 	}
- 
- rx_free:
-@@ -528,7 +543,7 @@ static void xrx200_hw_cleanup(struct xrx
- 
- 	/* free the allocated RX ring */
- 	for (i = 0; i < LTQ_DESC_NUM; i++)
--		dev_kfree_skb_any(priv->chan_rx.skb[i]);
-+		skb_free_frag(priv->chan_rx.rx_buff[i]);
- }
- 
- static int xrx200_probe(struct platform_device *pdev)
-@@ -554,6 +569,7 @@ static int xrx200_probe(struct platform_
- 	net_dev->min_mtu = ETH_ZLEN;
- 	net_dev->max_mtu = XRX200_DMA_DATA_LEN - xrx200_max_frame_len(0);
- 	priv->rx_buf_size = xrx200_buffer_size(ETH_DATA_LEN);
-+	priv->rx_skb_size = xrx200_skb_size(priv->rx_buf_size);
- 
- 	/* load the memory ranges */
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/target/linux/lantiq/patches-5.10/0716-v5.17-net-lantiq_xrx200-fix-use-after-free-bug.patch b/target/linux/lantiq/patches-5.10/0716-v5.17-net-lantiq_xrx200-fix-use-after-free-bug.patch
deleted file mode 100644
index 090b7e311112..000000000000
--- a/target/linux/lantiq/patches-5.10/0716-v5.17-net-lantiq_xrx200-fix-use-after-free-bug.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From dd830aed23c6e07cd8e2a163742bf3d63c9add08 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Sat, 5 Mar 2022 12:20:39 +0100
-Subject: net: lantiq_xrx200: fix use after free bug
-
-The skb->len field is read after the packet is sent to the network
-stack. In the meantime, skb can be freed. This patch fixes this bug.
-
-Fixes: c3e6b2c35b34 ("net: lantiq_xrx200: add ingress SG DMA support")
-Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/lantiq_xrx200.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -260,9 +260,9 @@ static int xrx200_hw_receive(struct xrx2
- 
- 	if (ctl & LTQ_DMA_EOP) {
- 		ch->skb_head->protocol = eth_type_trans(ch->skb_head, net_dev);
--		netif_receive_skb(ch->skb_head);
- 		net_dev->stats.rx_packets++;
- 		net_dev->stats.rx_bytes += ch->skb_head->len;
-+		netif_receive_skb(ch->skb_head);
- 		ch->skb_head = NULL;
- 		ch->skb_tail = NULL;
- 		ret = XRX200_DMA_PACKET_COMPLETE;
diff --git a/target/linux/lantiq/patches-5.10/0717-v6.0-net-lantiq_xrx200-confirm-skb-is-allocated-before-us.patch b/target/linux/lantiq/patches-5.10/0717-v6.0-net-lantiq_xrx200-confirm-skb-is-allocated-before-us.patch
deleted file mode 100644
index 9eaec5803315..000000000000
--- a/target/linux/lantiq/patches-5.10/0717-v6.0-net-lantiq_xrx200-confirm-skb-is-allocated-before-us.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From c8b043702dc0894c07721c5b019096cebc8c798f Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Wed, 24 Aug 2022 23:54:06 +0200
-Subject: [PATCH] net: lantiq_xrx200: confirm skb is allocated before using
-
-xrx200_hw_receive() assumes build_skb() always works and goes straight
-to skb_reserve(). However, build_skb() can fail under memory pressure.
-
-Add a check in case build_skb() failed to allocate and return NULL.
-
-Fixes: e015593573b3 ("net: lantiq_xrx200: convert to build_skb")
-Reported-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/lantiq_xrx200.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -239,6 +239,12 @@ static int xrx200_hw_receive(struct xrx2
- 	}
- 
- 	skb = build_skb(buf, priv->rx_skb_size);
-+	if (!skb) {
-+		skb_free_frag(buf);
-+		net_dev->stats.rx_dropped++;
-+		return -ENOMEM;
-+	}
-+
- 	skb_reserve(skb, NET_SKB_PAD);
- 	skb_put(skb, len);
- 
diff --git a/target/linux/lantiq/patches-5.10/0718-v6.0-net-lantiq_xrx200-fix-lock-under-memory-pressure.patch b/target/linux/lantiq/patches-5.10/0718-v6.0-net-lantiq_xrx200-fix-lock-under-memory-pressure.patch
deleted file mode 100644
index 929ae57ace1e..000000000000
--- a/target/linux/lantiq/patches-5.10/0718-v6.0-net-lantiq_xrx200-fix-lock-under-memory-pressure.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From c4b6e9341f930e4dd089231c0414758f5f1f9dbd Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Wed, 24 Aug 2022 23:54:07 +0200
-Subject: [PATCH] net: lantiq_xrx200: fix lock under memory pressure
-
-When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll
-function immediately returns an error.
-This is incorrect for two reasons:
-* the function terminates without enabling interrupts or scheduling NAPI,
-* the error code (-ENOMEM) is returned instead of the number of received
-packets.
-
-After the first memory allocation failure occurs, packet reception is
-locked due to disabled interrupts from DMA..
-
-Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/lantiq_xrx200.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -294,7 +294,7 @@ static int xrx200_poll_rx(struct napi_st
- 			if (ret == XRX200_DMA_PACKET_IN_PROGRESS)
- 				continue;
- 			if (ret != XRX200_DMA_PACKET_COMPLETE)
--				return ret;
-+				break;
- 			rx++;
- 		} else {
- 			break;
diff --git a/target/linux/lantiq/patches-5.10/0719-v6.0-net-lantiq_xrx200-restore-buffer-if-memory-allocatio.patch b/target/linux/lantiq/patches-5.10/0719-v6.0-net-lantiq_xrx200-restore-buffer-if-memory-allocatio.patch
deleted file mode 100644
index 182da58ed903..000000000000
--- a/target/linux/lantiq/patches-5.10/0719-v6.0-net-lantiq_xrx200-restore-buffer-if-memory-allocatio.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From c9c3b1775f80fa21f5bff874027d2ccb10f5d90c Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Wed, 24 Aug 2022 23:54:08 +0200
-Subject: [PATCH] net: lantiq_xrx200: restore buffer if memory allocation
- failed
-
-In a situation where memory allocation fails, an invalid buffer address
-is stored. When this descriptor is used again, the system panics in the
-build_skb() function when accessing memory.
-
-Fixes: 7ea6cd16f159 ("lantiq: net: fix duplicated skb in rx descriptor ring")
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/lantiq_xrx200.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/lantiq_xrx200.c
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -193,6 +193,7 @@ static int xrx200_alloc_buf(struct xrx20
- 
- 	ch->rx_buff[ch->dma.desc] = alloc(priv->rx_skb_size);
- 	if (!ch->rx_buff[ch->dma.desc]) {
-+		ch->rx_buff[ch->dma.desc] = buf;
- 		ret = -ENOMEM;
- 		goto skip;
- 	}
diff --git a/target/linux/lantiq/xrx200/config-5.10 b/target/linux/lantiq/xrx200/config-5.10
deleted file mode 100644
index 4dfd55274a36..000000000000
--- a/target/linux/lantiq/xrx200/config-5.10
+++ /dev/null
@@ -1,93 +0,0 @@
-CONFIG_AT803X_PHY=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin"
-CONFIG_EXTRA_FIRMWARE_DIR="firmware"
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GRO_CELLS=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_IFX_VPE_EXT=y
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INTEL_XWAY_PHY=y
-# CONFIG_ISDN is not set
-CONFIG_LANTIQ_XRX200=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MIPS_MT=y
-# CONFIG_MIPS_MT_FPAFF is not set
-CONFIG_MIPS_MT_SMP=y
-CONFIG_MIPS_NR_CPU_NR_MAP=2
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
-CONFIG_MIPS_VPE_APSP_API=y
-CONFIG_MIPS_VPE_APSP_API_MT=y
-CONFIG_MIPS_VPE_LOADER=y
-CONFIG_MIPS_VPE_LOADER_MT=y
-CONFIG_MIPS_VPE_LOADER_TOM=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_NAND_XWAY=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_LANTIQ_GSWIP=y
-CONFIG_NET_DSA_TAG_GSWIP=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NR_CPUS=2
-CONFIG_PADATA=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_LANTIQ=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LANTIQ=y
-CONFIG_PHY_LANTIQ_VRX200_PCIE=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_SUPPLY_HWMON=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_SENSORS_LTQ_CPUTEMP=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-CONFIG_SOC_TYPE_XWAY=y
-CONFIG_SOC_XWAY=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_SUPPORT=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/lantiq/xway/config-5.10 b/target/linux/lantiq/xway/config-5.10
deleted file mode 100644
index eafa4ef0bb75..000000000000
--- a/target/linux/lantiq/xway/config-5.10
+++ /dev/null
@@ -1,77 +0,0 @@
-CONFIG_ADM6996_PHY=y
-CONFIG_AR8216_PHY=y
-CONFIG_AT803X_PHY=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HW_RANDOM=y
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_ISDN is not set
-CONFIG_LANTIQ_ETOP=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MIPS_EBPF_JIT=y
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_MIPS_NR_CPU_NR_MAP=2
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_XWAY=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NR_CPUS=2
-CONFIG_PADATA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LANTIQ=y
-CONFIG_PSB6970_PHY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_SCHED_SMT=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-CONFIG_SOC_TYPE_XWAY=y
-CONFIG_SOC_XWAY=y
-CONFIG_SWCONFIG=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_SUPPORT=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/lantiq/xway_legacy/config-5.10 b/target/linux/lantiq/xway_legacy/config-5.10
deleted file mode 100644
index c177d2a93513..000000000000
--- a/target/linux/lantiq/xway_legacy/config-5.10
+++ /dev/null
@@ -1,33 +0,0 @@
-CONFIG_ADM6996_PHY=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_GENERIC_ALLOCATOR=y
-# CONFIG_GPIO_SYSFS is not set
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_ISDN is not set
-CONFIG_LANTIQ_ETOP=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_NLS=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LANTIQ=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RTL8306_PHY=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SOC_TYPE_XWAY=y
-CONFIG_SOC_XWAY=y
-CONFIG_SWCONFIG=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/layerscape/armv7/config-5.10 b/target/linux/layerscape/armv7/config-5.10
deleted file mode 100644
index f3b8a162348e..000000000000
--- a/target/linux/layerscape/armv7/config-5.10
+++ /dev/null
@@ -1,668 +0,0 @@
-CONFIG_AD525X_DPOT=y
-CONFIG_AD525X_DPOT_I2C=y
-# CONFIG_AD525X_DPOT_SPI is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_APDS9802ALS=y
-CONFIG_AQUANTIA_PHY=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_754327=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_ERRATA_798181=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
-# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
-# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
-# CONFIG_ARM_IMX_CPUFREQ_DT is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BATTERY_SBS=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_CMDLINE_PARSER=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=262144
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_BOUNCE=y
-CONFIG_BRCMSTB_GISB_ARB=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CDROM=y
-CONFIG_CHECKPOINT_RESTORE=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_IMX_GPT=y
-CONFIG_CLKSRC_MMIO=y
-# CONFIG_CLK_IMX8MM is not set
-# CONFIG_CLK_IMX8MN is not set
-# CONFIG_CLK_IMX8MP is not set
-# CONFIG_CLK_IMX8MQ is not set
-CONFIG_CLK_QORIQ=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=64
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CMDLINE_PARTITION=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEVFREQ_GOV_PASSIVE is not set
-# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
-# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
-# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
-# CONFIG_DEVFREQ_GOV_USERSPACE is not set
-# CONFIG_DEVFREQ_THERMAL is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DW_DMAC=y
-CONFIG_DW_DMAC_CORE=y
-CONFIG_DW_WATCHDOG=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_EEPROM_AT24=y
-CONFIG_ELF_CORE=y
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_F2FS_FS=y
-CONFIG_FAILOVER=y
-CONFIG_FAT_FS=y
-# CONFIG_FEC is not set
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_FREEZER=y
-CONFIG_FSL_EDMA=y
-CONFIG_FSL_GUTS=y
-CONFIG_FSL_IFC=y
-# CONFIG_FSL_PPFE is not set
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_RCPM=y
-CONFIG_FSL_XGMAC_MDIO=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FTRACE=y
-# CONFIG_FTRACE_SYSCALLS is not set
-CONFIG_FUSE_FS=y
-CONFIG_FW_CACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GIANFAR=y
-CONFIG_GLOB=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_GPIO_MXC=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HVC_DRIVER=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_DEMUX_PINCTRL=y
-CONFIG_I2C_DESIGNWARE_CORE=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_IMX=y
-# CONFIG_I2C_IMX_LPI2C is not set
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_MUX_PINCTRL=y
-CONFIG_I2C_RK3X=y
-CONFIG_I2C_SLAVE=y
-CONFIG_I2C_SLAVE_EEPROM=y
-# CONFIG_I2C_SLAVE_TESTUNIT is not set
-CONFIG_I2C_XILINX=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_ICS932S401=y
-CONFIG_IMX2_WDT=y
-# CONFIG_IMX7ULP_WDT is not set
-# CONFIG_IMX8MM_THERMAL is not set
-CONFIG_IMX_DMA=y
-# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
-CONFIG_IMX_INTMUX=y
-# CONFIG_IMX_IRQSTEER is not set
-CONFIG_IMX_SDMA=y
-# CONFIG_IMX_WEIM is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IPC_NS=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_ISL29003=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KCMP=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_LIBFDT=y
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LS_EXTIRQ=y
-CONFIG_LS_SCFG_MSI=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MCPM=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-# CONFIG_MDIO_GPIO is not set
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-# CONFIG_MFD_HI6421_SPMI is not set
-CONFIG_MFD_SYSCON=y
-# CONFIG_MFD_VEXPRESS_SYSREG is not set
-CONFIG_MICREL_PHY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=16
-# CONFIG_MMC_MXC is not set
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_ESDHC_IMX is not set
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MSDOS_FS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SST25L=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MX3_IPU=y
-CONFIG_MX3_IPU_IRQS=4
-CONFIG_MXC_CLK=y
-# CONFIG_MXS_DMA is not set
-CONFIG_NAMESPACES=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FAILOVER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_NS=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=16
-CONFIG_NTFS_FS=y
-CONFIG_NVMEM=y
-# CONFIG_NVMEM_IMX_IIM is not set
-# CONFIG_NVMEM_SNVS_LPGPR is not set
-# CONFIG_NVMEM_SPMI_SDAM is not set
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PACKET_DIAG=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_ECAM=y
-CONFIG_PCI_HOST_COMMON=y
-CONFIG_PCI_HOST_GENERIC=y
-# CONFIG_PCI_IMX6 is not set
-CONFIG_PCI_LAYERSCAPE=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PID_NS=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_IMX8MM is not set
-# CONFIG_PINCTRL_IMX8MN is not set
-# CONFIG_PINCTRL_IMX8MP is not set
-# CONFIG_PINCTRL_IMX8MQ is not set
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_DEVFREQ=y
-# CONFIG_PM_DEVFREQ_EVENT is not set
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_BRCMKONA=y
-CONFIG_POWER_RESET_BRCMSTB=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_RESET_SYSCON_POWEROFF=y
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_CHILDREN=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PSTORE=y
-CONFIG_PSTORE_COMPRESS=y
-CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
-CONFIG_PSTORE_CONSOLE=y
-CONFIG_PSTORE_DEFLATE_COMPRESS=y
-CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
-CONFIG_PSTORE_PMSG=y
-CONFIG_PSTORE_RAM=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PTP_1588_CLOCK_QORIQ=y
-CONFIG_QORIQ_CPUFREQ=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC8=y
-CONFIG_REED_SOLOMON_ENC8=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_DS3232=y
-CONFIG_RTC_DRV_EM3027=y
-CONFIG_RTC_DRV_FSL_FTM_ALARM=y
-# CONFIG_RTC_DRV_IMXDI is not set
-# CONFIG_RTC_DRV_MXC is not set
-# CONFIG_RTC_DRV_MXC_V2 is not set
-CONFIG_RTC_DRV_PCF2127=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCSI=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-# CONFIG_SECURITY_DMESG_RESTRICT is not set
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_EM=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
-CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
-CONFIG_SERIAL_FSL_LPUART=y
-CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_IMX_EARLYCON=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_ST_ASC=y
-CONFIG_SERIAL_ST_ASC_CONSOLE=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SMSC_PHY=y
-CONFIG_SOCK_DIAG=y
-CONFIG_SOC_BRCMSTB=y
-CONFIG_SOC_BUS=y
-# CONFIG_SOC_IMX50 is not set
-# CONFIG_SOC_IMX51 is not set
-# CONFIG_SOC_IMX53 is not set
-# CONFIG_SOC_IMX6Q is not set
-# CONFIG_SOC_IMX6SL is not set
-# CONFIG_SOC_IMX6SLL is not set
-# CONFIG_SOC_IMX6SX is not set
-# CONFIG_SOC_IMX6UL is not set
-# CONFIG_SOC_IMX7D is not set
-# CONFIG_SOC_IMX7ULP is not set
-# CONFIG_SOC_IMX8M is not set
-CONFIG_SOC_LS1021A=y
-# CONFIG_SOC_VF610 is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_CADENCE=y
-CONFIG_SPI_DYNAMIC=y
-# CONFIG_SPI_FSL_LPSPI is not set
-# CONFIG_SPI_FSL_QUADSPI is not set
-# CONFIG_SPI_IMX is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_SPI_XILINX=y
-CONFIG_SPMI=y
-# CONFIG_SPMI_HISI3670 is not set
-# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
-CONFIG_SQUASHFS_DECOMP_SINGLE=y
-CONFIG_SQUASHFS_FILE_CACHE=y
-# CONFIG_SQUASHFS_FILE_DIRECT is not set
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_ZLIB=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_STACKTRACE=y
-CONFIG_STAGING_BOARD=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UCLAMP_TASK is not set
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNIX_DIAG=y
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USER_NS=y
-CONFIG_USE_OF=y
-CONFIG_UTS_NS=y
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XILINX_WATCHDOG=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/layerscape/armv8_64b/config-5.10 b/target/linux/layerscape/armv8_64b/config-5.10
deleted file mode 100644
index 4b8a819edffb..000000000000
--- a/target/linux/layerscape/armv8_64b/config-5.10
+++ /dev/null
@@ -1,851 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_AQUANTIA_PHY=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_HEADER=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_LAYERSCAPE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=33
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CNP=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_ERRATUM_1742098=y
-CONFIG_ARM64_ERRATUM_1165522=y
-CONFIG_ARM64_ERRATUM_1286807=y
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_HW_AFDBM=y
-CONFIG_ARM64_MODULE_PLTS=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=48
-# CONFIG_ARM64_VA_BITS_39 is not set
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_ARM64_VHE=y
-CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
-CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_FSL_MC=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_CPUIDLE=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_SMMU=y
-# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set
-# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
-CONFIG_ARM_SMMU_V3=y
-# CONFIG_ARM_SMMU_V3_SVA is not set
-CONFIG_ARM_SP805_WATCHDOG=y
-CONFIG_ASM_MODVERSIONS=y
-CONFIG_ASN1=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_AUTOFS_FS=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_BATTERY_BQ27XXX=y
-# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
-CONFIG_BATTERY_BQ27XXX_I2C=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_BLK_DEV_INTEGRITY_T10=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=262144
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_BTRFS_FS=y
-# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_CAVIUM_ERRATUM_22375=y
-CONFIG_CAVIUM_ERRATUM_23144=y
-CONFIG_CAVIUM_ERRATUM_23154=y
-CONFIG_CAVIUM_ERRATUM_27456=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CHECKPOINT_RESTORE=y
-CONFIG_CHROME_PLATFORMS=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLK_LS1028A_PLLDIG=y
-CONFIG_CLK_QORIQ=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_CS2000_CP=y
-# CONFIG_COMMON_CLK_FSL_SAI is not set
-CONFIG_COMMON_CLK_XGENE=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_COREDUMP=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_THERMAL=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRC7=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-# CONFIG_CROS_EC is not set
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_BLAKE2B=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_FSL_CAAM=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI=y
-# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set
-CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
-CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
-CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ENGINE=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RSA=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA256_ARM64=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_XXHASH=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DIMLIB=y
-CONFIG_DMADEVICES=y
-CONFIG_DMATEST=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DPAA2_CONSOLE=y
-CONFIG_DPAA_ERRATUM_A050385=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_ELF_CORE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_EXTCON=y
-CONFIG_EXTCON_USB_GPIO=y
-CONFIG_F2FS_FS=y
-CONFIG_FAILOVER=y
-CONFIG_FANOTIFY=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FREEZER=y
-# CONFIG_FSL_BMAN_TEST is not set
-CONFIG_FSL_DPAA=y
-CONFIG_FSL_DPAA2=y
-CONFIG_FSL_DPAA2_ETH=y
-CONFIG_FSL_DPAA2_ETHSW=y
-CONFIG_FSL_DPAA2_PTP_CLOCK=y
-# CONFIG_FSL_DPAA2_QDMA is not set
-# CONFIG_FSL_DPAA_CHECKING is not set
-CONFIG_FSL_DPAA_ETH=y
-CONFIG_FSL_EDMA=y
-CONFIG_FSL_ENETC=y
-CONFIG_FSL_ENETC_MDIO=y
-CONFIG_FSL_ENETC_PTP_CLOCK=y
-CONFIG_FSL_ENETC_VF=y
-CONFIG_FSL_ERRATUM_A008585=y
-CONFIG_FSL_FMAN=y
-CONFIG_FSL_GUTS=y
-CONFIG_FSL_IFC=y
-CONFIG_FSL_MC_BUS=y
-CONFIG_FSL_MC_DPIO=y
-# CONFIG_FSL_PPFE is not set
-# CONFIG_FSL_PPFE_UTIL_DISABLED is not set
-# CONFIG_FSL_QMAN_TEST is not set
-CONFIG_FSL_RCPM=y
-CONFIG_FSL_XGMAC_MDIO=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FUSE_FS=y
-CONFIG_FW_CACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GARP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-# CONFIG_GIANFAR is not set
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HIBERNATION=y
-CONFIG_HIBERNATION_SNAPSHOT_DEV=y
-CONFIG_HID=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GENERIC=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_DESIGNWARE_CORE=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_IMX=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_RK3X=y
-CONFIG_I2C_SLAVE=y
-# CONFIG_I2C_SLAVE_TESTUNIT is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_IMX2_WDT=y
-CONFIG_INET_DIAG=y
-# CONFIG_INET_DIAG_DESTROY is not set
-# CONFIG_INET_RAW_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
-CONFIG_INTERVAL_TREE=y
-CONFIG_IOMMU_API=y
-# CONFIG_IOMMU_DEBUGFS is not set
-CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
-CONFIG_IOMMU_DMA=y
-CONFIG_IOMMU_IOVA=y
-CONFIG_IOMMU_IO_PGTABLE=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-CONFIG_IOMMU_IO_PGTABLE_LPAE=y
-# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IPC_NS=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_BYPASS_MANAGER=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MSI_IOMMU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_JBD2=y
-CONFIG_JUMP_LABEL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KCMP=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KSM=y
-CONFIG_LIBCRC32C=y
-CONFIG_LIBFDT=y
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LS_EXTIRQ=y
-CONFIG_LS_SCFG_MSI=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-# CONFIG_MDIO_GPIO is not set
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_BALLOON=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MEMTEST=y
-# CONFIG_MFD_HI6421_SPMI is not set
-CONFIG_MFD_SYSCON=y
-# CONFIG_MFD_VEXPRESS_SYSREG is not set
-CONFIG_MICREL_PHY=y
-CONFIG_MICROSEMI_PHY=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMU_NOTIFIER=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_BYD=y
-CONFIG_MOUSE_PS2_CYPRESS=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_FOCALTECH=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SMBUS=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MPILIB=y
-CONFIG_MRP=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MTD_SST25L=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTIPLEXER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MUX_MMIO=y
-CONFIG_MV_XOR_V2=y
-CONFIG_NAMESPACES=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_FAILOVER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_NS=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NODES_SHIFT=2
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=64
-CONFIG_NUMA=y
-CONFIG_NUMA_BALANCING=y
-CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
-CONFIG_NVMEM=y
-# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
-# CONFIG_NVMEM_SPMI_SDAM is not set
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IOMMU=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_NUMA=y
-CONFIG_PACKET_DIAG=y
-CONFIG_PADATA=y
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_REPORTING=y
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_PARAVIRT=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-CONFIG_PCIE_LAYERSCAPE_GEN4=y
-CONFIG_PCIE_MOBIVEIL=y
-CONFIG_PCIE_MOBIVEIL_HOST=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_ATS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_ECAM=y
-CONFIG_PCI_HISI=y
-CONFIG_PCI_HOST_COMMON=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_IOV=y
-CONFIG_PCI_LAYERSCAPE=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCS_LYNX=y
-CONFIG_PGTABLE_LEVELS=4
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_XGENE=y
-CONFIG_PID_IN_CONTEXTIDR=y
-CONFIG_PID_NS=y
-CONFIG_PL330_DMA=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_STD_PARTITION=""
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_POWER_RESET_XGENE=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPTION=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_PROC_CHILDREN=y
-CONFIG_PROFILING=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PTP_1588_CLOCK_QORIQ=y
-CONFIG_QCOM_HIDMA=y
-CONFIG_QCOM_HIDMA_MGMT=y
-CONFIG_QCOM_QDF2400_ERRATUM_0065=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QORIQ_CPUFREQ=y
-CONFIG_QORIQ_THERMAL=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_QUOTA=y
-CONFIG_QUOTACTL=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_RAID6_PQ=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_DS3232=y
-CONFIG_RTC_DRV_FSL_FTM_ALARM=y
-CONFIG_RTC_DRV_PCF2127=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCHED_INFO=y
-CONFIG_SCHED_MC=y
-CONFIG_SCHED_THERMAL_PRESSURE=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-# CONFIG_SCSI_SAS_ATA is not set
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_FSL_LPUART=y
-CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_SC16IS7XX=y
-CONFIG_SERIAL_SC16IS7XX_CORE=y
-# CONFIG_SERIAL_SC16IS7XX_I2C is not set
-CONFIG_SERIAL_SC16IS7XX_SPI=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_SERIO=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-CONFIG_SMP=y
-CONFIG_SOCK_DIAG=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_DSPI=y
-CONFIG_SPI_FSL_QUADSPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_NXP_FLEXSPI=y
-CONFIG_SPI_PL022=y
-CONFIG_SPMI=y
-# CONFIG_SPMI_HISI3670 is not set
-# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
-CONFIG_SQUASHFS_DECOMP_SINGLE=y
-CONFIG_SQUASHFS_FILE_CACHE=y
-# CONFIG_SQUASHFS_FILE_DIRECT is not set
-# CONFIG_SQUASHFS_XZ is not set
-CONFIG_SQUASHFS_ZLIB=y
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWIOTLB_XEN=y
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_HYPERVISOR=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_TASK_XACCT=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_EMULATION=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
-# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-# CONFIG_UACCE is not set
-CONFIG_UBIFS_FS=y
-# CONFIG_UCLAMP_TASK is not set
-CONFIG_UIO=y
-CONFIG_UIO_AEC=y
-CONFIG_UIO_CIF=y
-CONFIG_UIO_DMEM_GENIRQ=y
-CONFIG_UIO_MF624=y
-CONFIG_UIO_NETX=y
-CONFIG_UIO_PCI_GENERIC=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_PRUSS is not set
-CONFIG_UIO_SERCOS3=y
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_UNIX_DIAG=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USER_NS=y
-CONFIG_USE_PERCPU_NUMA_NODE_ID=y
-CONFIG_UTS_NS=y
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_VFAT_FS=y
-CONFIG_VFIO=y
-CONFIG_VFIO_FSL_MC=y
-CONFIG_VFIO_IOMMU_TYPE1=y
-# CONFIG_VFIO_MDEV is not set
-# CONFIG_VFIO_NOIOMMU is not set
-CONFIG_VFIO_PCI=y
-CONFIG_VFIO_PCI_INTX=y
-CONFIG_VFIO_PCI_MMAP=y
-# CONFIG_VFIO_PLATFORM is not set
-CONFIG_VFIO_VIRQFD=y
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VIDEOMODE_HELPERS=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_VLAN_8021Q_MVRP=y
-CONFIG_VMAP_STACK=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XARRAY_MULTI=y
-CONFIG_XEN=y
-CONFIG_XENFS=y
-CONFIG_XEN_AUTO_XLATE=y
-CONFIG_XEN_BACKEND=y
-CONFIG_XEN_BALLOON=y
-# CONFIG_XEN_BLKDEV_BACKEND is not set
-CONFIG_XEN_BLKDEV_FRONTEND=y
-CONFIG_XEN_COMPAT_XENFS=y
-CONFIG_XEN_DEV_EVTCHN=y
-CONFIG_XEN_DOM0=y
-CONFIG_XEN_FBDEV_FRONTEND=y
-CONFIG_XEN_GNTDEV=y
-CONFIG_XEN_GRANT_DEV_ALLOC=y
-# CONFIG_XEN_NETDEV_BACKEND is not set
-CONFIG_XEN_NETDEV_FRONTEND=y
-CONFIG_XEN_PRIVCMD=y
-# CONFIG_XEN_PVCALLS_BACKEND is not set
-# CONFIG_XEN_SCSI_FRONTEND is not set
-CONFIG_XEN_SYS_HYPERVISOR=y
-# CONFIG_XEN_WDT is not set
-CONFIG_XEN_XENBUS_FRONTEND=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-CONFIG_XOR_BLOCKS=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/layerscape/patches-5.10/300-add-DTS-for-Traverse-LS1043-Boards.patch b/target/linux/layerscape/patches-5.10/300-add-DTS-for-Traverse-LS1043-Boards.patch
deleted file mode 100644
index 9dcd9348b2d5..000000000000
--- a/target/linux/layerscape/patches-5.10/300-add-DTS-for-Traverse-LS1043-Boards.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 5b35aae22b4ca2400e49561c9267aa01346f91d4 Mon Sep 17 00:00:00 2001
-From: Mathew McBride <matt@traverse.com.au>
-Date: Tue, 17 Apr 2018 10:01:03 +1000
-Subject: [PATCH] add DTS for Traverse LS1043 Boards
-
-Signed-off-by: Mathew McBride <matt@traverse.com.au>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- arch/arm64/boot/dts/freescale/Makefile             |  3 +++
- arch/arm64/boot/dts/freescale/traverse-ls1043s.dts | 29 ++++++++++++++++++++++
- arch/arm64/boot/dts/freescale/traverse-ls1043v.dts | 29 ++++++++++++++++++++++
- 3 files changed, 61 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/Makefile
-+++ b/arch/arm64/boot/dts/freescale/Makefile
-@@ -28,6 +28,9 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
- dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
- 
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043v.dtb
-+dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043s.dtb
-+
- dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
- dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
- dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
diff --git a/target/linux/layerscape/patches-5.10/301-arm-dts-ls1021a-Add-LS1021A-IOT-board-support.patch b/target/linux/layerscape/patches-5.10/301-arm-dts-ls1021a-Add-LS1021A-IOT-board-support.patch
deleted file mode 100644
index ce6a19c896fa..000000000000
--- a/target/linux/layerscape/patches-5.10/301-arm-dts-ls1021a-Add-LS1021A-IOT-board-support.patch
+++ /dev/null
@@ -1,291 +0,0 @@
-From 55e00e402d6143aeb153761f8144d9fee5f1f009 Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Fri, 26 Oct 2018 16:00:37 +0800
-Subject: [PATCH] arm: dts: ls1021a: Add LS1021A-IOT board support
-
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
-[rebase]
-Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
----
- arch/arm/boot/dts/Makefile        |   3 +-
- arch/arm/boot/dts/ls1021a-iot.dts | 262 ++++++++++++++++++++++++++++++++++++++
- 2 files changed, 264 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/ls1021a-iot.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -666,7 +666,8 @@ dtb-$(CONFIG_SOC_LS1021A) += \
- 	ls1021a-moxa-uc-8410a.dtb \
- 	ls1021a-qds.dtb \
- 	ls1021a-tsn.dtb \
--	ls1021a-twr.dtb
-+	ls1021a-twr.dtb \
-+	ls1021a-iot.dtb
- dtb-$(CONFIG_SOC_VF610) += \
- 	vf500-colibri-eval-v3.dtb \
- 	vf610-bk4.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/ls1021a-iot.dts
-@@ -0,0 +1,262 @@
-+/*
-+ * Copyright 2013-2016 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+/dts-v1/;
-+#include "ls1021a.dtsi"
-+
-+/ {
-+	model = "LS1021A IOT Board";
-+
-+	sys_mclk: clock-mclk {
-+		compatible = "fixed-clock";
-+		#clock-cells = <0>;
-+		clock-frequency = <24576000>;
-+	};
-+
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		reg_3p3v: regulator@0 {
-+			compatible = "regulator-fixed";
-+			reg = <0>;
-+			regulator-name = "3P3V";
-+			regulator-min-microvolt = <3300000>;
-+			regulator-max-microvolt = <3300000>;
-+			regulator-always-on;
-+		};
-+
-+		reg_2p5v: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "2P5V";
-+			regulator-min-microvolt = <2500000>;
-+			regulator-max-microvolt = <2500000>;
-+			regulator-always-on;
-+		};
-+	};
-+
-+	sound {
-+		compatible = "simple-audio-card";
-+		simple-audio-card,format = "i2s";
-+		simple-audio-card,widgets =
-+			"Microphone", "Microphone Jack",
-+			"Headphone", "Headphone Jack",
-+			"Speaker", "Speaker Ext",
-+			"Line", "Line In Jack";
-+		simple-audio-card,routing =
-+			"MIC_IN", "Microphone Jack",
-+			"Microphone Jack", "Mic Bias",
-+			"LINE_IN", "Line In Jack",
-+			"Headphone Jack", "HP_OUT",
-+			"Speaker Ext", "LINE_OUT";
-+
-+		simple-audio-card,cpu {
-+			sound-dai = <&sai2>;
-+			frame-master;
-+			bitclock-master;
-+		};
-+
-+		simple-audio-card,codec {
-+			sound-dai = <&codec>;
-+			frame-master;
-+			bitclock-master;
-+		};
-+	};
-+
-+	firmware {
-+		optee {
-+			compatible = "linaro,optee-tz";
-+			method = "smc";
-+			};
-+		};
-+};
-+
-+&enet0 {
-+	tbi-handle = <&tbi1>;
-+	phy-handle = <&phy1>;
-+	phy-connection-type = "sgmii";
-+	status = "okay";
-+};
-+
-+&enet1 {
-+	tbi-handle = <&tbi1>;
-+	phy-handle = <&phy3>;
-+	phy-connection-type = "sgmii";
-+	status = "okay";
-+};
-+
-+&enet2 {
-+	fixed-link = <0 1 1000 0 0>;
-+	phy-connection-type = "rgmii-id";
-+	status = "okay";
-+};
-+
-+&can0{
-+	status = "disabled";
-+};
-+
-+&can1{
-+	status = "disabled";
-+};
-+
-+&can2{
-+	status = "disabled";
-+};
-+
-+&can3{
-+	status = "okay";
-+};
-+
-+&esdhc{
-+	status = "okay";
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	max1239@35 {
-+		compatible = "maxim,max1239";
-+		reg = <0x35>;
-+		#io-channel-cells = <1>;
-+	};
-+
-+	codec: sgtl5000@2a {
-+               #sound-dai-cells=<0x0>;
-+		compatible = "fsl,sgtl5000";
-+		reg = <0x2a>;
-+		VDDA-supply = <&reg_3p3v>;
-+		VDDIO-supply = <&reg_2p5v>;
-+		clocks = <&sys_mclk 1>;
-+	};
-+
-+	pca9555: pca9555@23 {
-+		compatible = "nxp,pca9555";
-+		/*pinctrl-names = "default";*/
-+		/*interrupt-parent = <&gpio2>;
-+		interrupts = <19 0x2>;*/
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		interrupt-controller;
-+		#interrupt-cells = <2>;
-+		reg = <0x23>;
-+	};
-+
-+	ina220@44 {
-+		compatible = "ti,ina220";
-+		reg = <0x44>;
-+		shunt-resistor = <1000>;
-+	};
-+
-+	ina220@45 {
-+		compatible = "ti,ina220";
-+		reg = <0x45>;
-+		shunt-resistor = <1000>;
-+	};
-+
-+	lm75b@48 {
-+                compatible = "nxp,lm75a";
-+                reg = <0x48>;
-+        };
-+
-+	adt7461a@4c {
-+		compatible = "adt7461a";
-+		reg = <0x4c>;
-+	};
-+
-+	hdmi: sii9022a@39 {
-+		compatible = "fsl,sii902x";
-+		reg = <0x39>;
-+		interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
-+	};
-+};
-+
-+&i2c1 {
-+	status = "disabled";
-+};
-+
-+&ifc {
-+	status = "disabled";
-+};
-+
-+&lpuart0 {
-+	status = "okay";
-+};
-+
-+&mdio0 {
-+	phy0: ethernet-phy@0 {
-+		reg = <0x0>;
-+	};
-+	phy1: ethernet-phy@1 {
-+		reg = <0x1>;
-+	};
-+	phy2: ethernet-phy@2 {
-+		reg = <0x2>;
-+	};
-+	phy3: ethernet-phy@3 {
-+		reg = <0x3>;
-+	};
-+	tbi1: tbi-phy@1f {
-+		reg = <0x1f>;
-+		device_type = "tbi-phy";
-+	};
-+};
-+
-+&qspi {
-+	num-cs = <2>;
-+	status = "okay";
-+
-+	qflash0: s25fl128s@0 {
-+		compatible = "spansion,s25fl129p1";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+	};
-+};
-+
-+&sai2 {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	status = "okay";
-+};
-+
-+&dcu {
-+	display = <&display>;
-+	status = "okay";
-+
-+	display: display@0 {
-+		bits-per-pixel = <24>;
-+
-+		display-timings {
-+			native-mode = <&timing0>;
-+
-+			timing0: mode0 {
-+				clock-frequency = <25000000>;
-+				hactive = <640>;
-+				vactive = <480>;
-+				hback-porch = <80>;
-+				hfront-porch = <80>;
-+				vback-porch = <16>;
-+				vfront-porch = <16>;
-+				hsync-len = <12>;
-+				vsync-len = <2>;
-+				hsync-active = <1>;
-+				vsync-active = <1>;
-+			};
-+		};
-+	};
-+};
diff --git a/target/linux/layerscape/patches-5.10/302-arm64-dts-ls1012a-update-with-ppfe-support.patch b/target/linux/layerscape/patches-5.10/302-arm64-dts-ls1012a-update-with-ppfe-support.patch
deleted file mode 100644
index ef645f123d69..000000000000
--- a/target/linux/layerscape/patches-5.10/302-arm64-dts-ls1012a-update-with-ppfe-support.patch
+++ /dev/null
@@ -1,295 +0,0 @@
-From 1bb35ff4ce33e65601c8d9c736be52e4aabd6252 Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Sat, 16 Sep 2017 14:20:23 +0530
-Subject: [PATCH] arm64: dts: freescale: ls1012a: update with ppfe support
-
-Update ls1012a dtsi and platform dts files with support for ppfe.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
----
- .../boot/dts/freescale/fsl-ls1012a-frdm.dts   | 43 +++++++++++++++++
- .../boot/dts/freescale/fsl-ls1012a-frwy.dts   | 43 +++++++++++++++++
- .../boot/dts/freescale/fsl-ls1012a-qds.dts    | 43 +++++++++++++++++
- .../boot/dts/freescale/fsl-ls1012a-rdb.dts    | 47 +++++++++++++++++++
- .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 29 ++++++++++++
- 5 files changed, 205 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-@@ -13,6 +13,11 @@
- 	model = "LS1012A Freedom Board";
- 	compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
- 
-+	aliases {
-+		ethernet0 = &pfe_mac0;
-+		ethernet1 = &pfe_mac1;
-+	};
-+
- 	sys_mclk: clock-mclk {
- 		compatible = "fixed-clock";
- 		#clock-cells = <0>;
-@@ -74,6 +79,44 @@
- 	};
- };
- 
-+&pfe {
-+	status = "okay";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	pfe_mac0: ethernet@0 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x0>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x1>; /* enabled/disabled */
-+		};
-+	};
-+
-+	pfe_mac1: ethernet@1 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x1>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x0>; /* enabled/disabled */
-+		};
-+	};
-+};
-+
- &qspi {
- 	status = "okay";
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
-@@ -14,6 +14,11 @@
- / {
- 	model = "LS1012A FRWY Board";
- 	compatible = "fsl,ls1012a-frwy", "fsl,ls1012a";
-+
-+	aliases {
-+		ethernet0 = &pfe_mac0;
-+		ethernet1 = &pfe_mac1;
-+	};
- };
- 
- &duart0 {
-@@ -24,6 +29,44 @@
- 	status = "okay";
- };
- 
-+&pfe {
-+	status = "okay";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	pfe_mac0: ethernet@0 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x0>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x1>; /* enabled/disabled */
-+		};
-+	};
-+
-+	pfe_mac1: ethernet@1 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x1>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x0>; /* enabled/disabled */
-+		};
-+	};
-+};
-+
- &qspi {
- 	status = "okay";
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
-@@ -13,6 +13,11 @@
- 	model = "LS1012A QDS Board";
- 	compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
- 
-+	aliases {
-+		ethernet0 = &pfe_mac0;
-+		ethernet1 = &pfe_mac1;
-+	};
-+
- 	sys_mclk: clock-mclk {
- 		compatible = "fixed-clock";
- 		#clock-cells = <0>;
-@@ -127,6 +132,44 @@
- 		};
- 	};
- };
-+
-+&pfe {
-+	status = "okay";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	pfe_mac0: ethernet@0 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x0>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x2>;
-+		phy-mode = "sgmii-2500";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x1>; /* enabled/disabled */
-+		};
-+	};
-+
-+	pfe_mac1: ethernet@1 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x1>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x3>;
-+		phy-mode = "sgmii-2500";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x0>; /* enabled/disabled */
-+		};
-+	};
-+};
- 
- &qspi {
- 	status = "okay";
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-@@ -12,6 +12,15 @@
- / {
- 	model = "LS1012A RDB Board";
- 	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
-+
-+	aliases {
-+		ethernet0 = &pfe_mac0;
-+		ethernet1 = &pfe_mac1;
-+	};
-+};
-+
-+&pcie1 {
-+	status = "okay";
- };
- 
- &duart0 {
-@@ -35,6 +44,44 @@
- 	status = "okay";
- };
- 
-+&pfe {
-+	status = "okay";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	pfe_mac0: ethernet@0 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x0>;	/* GEM_ID */
-+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
-+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "sgmii";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x1>; /* enabled/disabled */
-+		};
-+	};
-+
-+	pfe_mac1: ethernet@1 {
-+		compatible = "fsl,pfe-gemac-port";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x1>;	/* GEM_ID */
-+		fsl,gemac-bus-id = < 0x1 >;	/* BUS_ID */
-+		fsl,gemac-phy-id = < 0x1 >;	/* PHY_ID */
-+		fsl,mdio-mux-val = <0x0>;
-+		phy-mode = "rgmii-txid";
-+		fsl,pfe-phy-if-flags = <0x0>;
-+
-+		mdio@0 {
-+			reg = <0x0>; /* enabled/disabled */
-+		};
-+	};
-+};
-+
- &qspi {
- 	status = "okay";
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
-@@ -531,6 +531,35 @@
- 		};
- 	};
- 
-+	reserved-memory {
-+		#address-cells = <2>;
-+		#size-cells = <2>;
-+		ranges;
-+
-+		pfe_reserved: packetbuffer@83400000 {
-+			reg = <0 0x83400000 0 0xc00000>;
-+		};
-+	};
-+
-+	pfe: pfe@04000000 {
-+		compatible = "fsl,pfe";
-+		reg =   <0x0 0x04000000 0x0 0xc00000>,	/* AXI 16M */
-+			<0x0 0x83400000 0x0 0xc00000>;  /* PFE DDR 12M */
-+		reg-names = "pfe", "pfe-ddr";
-+		fsl,pfe-num-interfaces = <0x2>;
-+		interrupts = <0 172 0x4>,    /* HIF interrupt */
-+			     <0 173 0x4>,    /*HIF_NOCPY interrupt */
-+			     <0 174 0x4>;    /* WoL interrupt */
-+		interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
-+		memory-region = <&pfe_reserved>;
-+		fsl,pfe-scfg = <&scfg 0>;
-+		fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
-+		clocks = <&clockgen 4 0>;
-+		clock-names = "pfe";
-+
-+		status = "okay";
-+	};
-+
- 	firmware {
- 		optee {
- 			compatible = "linaro,optee-tz";
diff --git a/target/linux/layerscape/patches-5.10/303-arm64-dts-ls1012a-frdm-workaround-by-updating-qspi-f.patch b/target/linux/layerscape/patches-5.10/303-arm64-dts-ls1012a-frdm-workaround-by-updating-qspi-f.patch
deleted file mode 100644
index 9cd016deabbb..000000000000
--- a/target/linux/layerscape/patches-5.10/303-arm64-dts-ls1012a-frdm-workaround-by-updating-qspi-f.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 9c5c18dbf8e1845d349ef7020f8af5bc9b56ed1f Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Fri, 28 Sep 2022 17:14:32 +0200
-Subject: [PATCH] arm64: dts: ls1012a-frdm/qds: workaround by updating qspi flash to
- single mode
-
-Update rx and tx bus-width to 1 to use single mode to workaround ubifs
-issue found with double mode. (The same method as RDB board)
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 4 ++--
- arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts  | 4 ++--
- 2 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
-@@ -127,8 +127,8 @@
- 		spi-max-frequency = <50000000>;
- 		m25p,fast-read;
- 		reg = <0>;
--		spi-rx-bus-width = <2>;
--		spi-tx-bus-width = <2>;
-+		spi-rx-bus-width = <1>;
-+		spi-tx-bus-width = <1>;
- 	};
- };
- 
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
-@@ -181,8 +181,8 @@
- 		spi-max-frequency = <50000000>;
- 		m25p,fast-read;
- 		reg = <0>;
--		spi-rx-bus-width = <2>;
--		spi-tx-bus-width = <2>;
-+		spi-rx-bus-width = <1>;
-+		spi-tx-bus-width = <1>;
- 	};
- };
- 
diff --git a/target/linux/layerscape/patches-5.10/304-arm64-dts-ls1012a-rdb-workaround-by-updating-qspi-fl.patch b/target/linux/layerscape/patches-5.10/304-arm64-dts-ls1012a-rdb-workaround-by-updating-qspi-fl.patch
deleted file mode 100644
index 67eb5300e8ae..000000000000
--- a/target/linux/layerscape/patches-5.10/304-arm64-dts-ls1012a-rdb-workaround-by-updating-qspi-fl.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 9c5c18dbf8e1845d349ef7020f8af5bc9b56ed1f Mon Sep 17 00:00:00 2001
-From: Kuldeep Singh <kuldeep.singh@nxp.com>
-Date: Tue, 7 Jan 2020 17:14:32 +0530
-Subject: [PATCH] arm64: dts: ls1012a-rdb: workaround by updating qspi flash to
- single mode
-
-Update rx and tx bus-width to 1 to use single mode to workaround ubifs
-issue found with double mode.
-
-[ Leo: Local workaround ]
-
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
-@@ -92,8 +92,8 @@
- 		spi-max-frequency = <50000000>;
- 		m25p,fast-read;
- 		reg = <0>;
--		spi-rx-bus-width = <2>;
--		spi-tx-bus-width = <2>;
-+		spi-rx-bus-width = <1>;
-+		spi-tx-bus-width = <1>;
- 	};
- };
- 
diff --git a/target/linux/layerscape/patches-5.10/305-arm64-dts-ls1046a-rdb-Update-qspi-spi-rx-bus-width-t.patch b/target/linux/layerscape/patches-5.10/305-arm64-dts-ls1046a-rdb-Update-qspi-spi-rx-bus-width-t.patch
deleted file mode 100644
index a7af6e16ada0..000000000000
--- a/target/linux/layerscape/patches-5.10/305-arm64-dts-ls1046a-rdb-Update-qspi-spi-rx-bus-width-t.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 38093ebbf25eb60a1aa863f46118a68a0300c56e Mon Sep 17 00:00:00 2001
-From: Kuldeep Singh <kuldeep.singh@nxp.com>
-Date: Fri, 3 Jan 2020 14:49:07 +0530
-Subject: [PATCH] arm64: dts: ls1046a-rdb: Update qspi spi-rx-bus-width to 1
-
-Update rx width from quad mode to single mode as a workaround.
-
-[Leo: Local workaround ]
-
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
-@@ -101,7 +101,7 @@
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 		spi-max-frequency = <50000000>;
--		spi-rx-bus-width = <4>;
-+		spi-rx-bus-width = <1>;
- 		spi-tx-bus-width = <1>;
- 		reg = <0>;
- 	};
-@@ -111,7 +111,7 @@
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 		spi-max-frequency = <50000000>;
--		spi-rx-bus-width = <4>;
-+		spi-rx-bus-width = <1>;
- 		spi-tx-bus-width = <1>;
- 		reg = <1>;
- 	};
diff --git a/target/linux/layerscape/patches-5.10/400-LF-20-3-mtd-spi-nor-Use-1-bit-mode-of-spansion-s25fs.patch b/target/linux/layerscape/patches-5.10/400-LF-20-3-mtd-spi-nor-Use-1-bit-mode-of-spansion-s25fs.patch
deleted file mode 100644
index aea483d1afed..000000000000
--- a/target/linux/layerscape/patches-5.10/400-LF-20-3-mtd-spi-nor-Use-1-bit-mode-of-spansion-s25fs.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 2b84e88d36de482da0370290ad4af09a71993f08 Mon Sep 17 00:00:00 2001
-From: Han Xu <han.xu@nxp.com>
-Date: Tue, 14 Apr 2020 11:58:44 -0500
-Subject: [PATCH] LF-20-3 mtd: spi-nor: Use 1 bit mode of spansion(s25fs512s)
- flash
-
-This is a workaround patch which uses only single bit mode of s25fs512s
-flash
-
-Signed-off-by: Han Xu <han.xu@nxp.com>
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
----
- drivers/mtd/spi-nor/spansion.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/spansion.c
-+++ b/drivers/mtd/spi-nor/spansion.c
-@@ -62,7 +62,7 @@ static const struct flash_info spansion_
- 			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- 			      USE_CLSR) },
- 	{ "s25fs512s",  INFO6(0x010220, 0x4d0081, 256 * 1024, 256,
--			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
-+			      SPI_NOR_4B_OPCODES | USE_CLSR)
- 	  .fixups = &s25fs_s_fixups, },
- 	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
- 	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
diff --git a/target/linux/layerscape/patches-5.10/701-staging-add-fsl_ppfe-driver.patch b/target/linux/layerscape/patches-5.10/701-staging-add-fsl_ppfe-driver.patch
deleted file mode 100644
index 71c86e55fd9a..000000000000
--- a/target/linux/layerscape/patches-5.10/701-staging-add-fsl_ppfe-driver.patch
+++ /dev/null
@@ -1,12036 +0,0 @@
-From ab06204b9ae48324ed5b7e7026cce47ecd0a376d Mon Sep 17 00:00:00 2001
-From: Martin Schiller <ms@dev.tdt.de>
-Date: Mon, 8 Nov 2021 14:56:10 +0100
-Subject: [PATCH] staging: add fsl_ppfe driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch is the squashed version of all ppfe related commits from
-LSDK-21.08.
-
-See the following git log for further details:
-
-commit bc389fa57819620b61f86a39444cf22c70e291ad
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Sat Sep 16 07:05:49 2017 +0530
-
-    net: fsl_ppfe: dts binding for ppfe
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-    Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
-
-commit d3822b65f897e4c421c72bd215f34e41d8c4a40e
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Sat Sep 16 14:21:37 2017 +0530
-
-    staging: fsl_ppfe/eth: header files for pfe driver
-
-    This patch has all pfe header files.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-    Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
-
-commit 9184a85f93816a8b81cb363464925757185b7138
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Sat Sep 16 14:22:17 2017 +0530
-
-    staging: fsl_ppfe/eth: introduce pfe driver
-
-            This patch introduces Linux support for NXP's LS1012A Packet
-    Forwarding Engine (pfe_eth). LS1012A uses hardware packet forwarding
-    engine to provide high performance Ethernet interfaces. The device
-    includes two Ethernet ports.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-    Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
-
-commit 63f6117f1c9af34bc333425507a8b858fcd61951
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Oct 11 19:23:38 2017 +0530
-
-    staging: fsl_ppfe/eth: fix RGMII tx delay issue
-
-    Recently logic to enable RGMII tx delay was changed by
-    below patch.
-
-    https://patchwork.kernel.org/patch/9447581/
-
-    Based on the patch, appropriate change is made in PFE driver.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-    Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
-
-commit adf71df9d53026513da71892a27c455ae23a6d06
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Oct 18 14:29:30 2017 +0530
-
-    staging: fsl_ppfe/eth: remove unused functions
-
-    Remove unused functions hif_xmit_pkt & hif_lib_xmit_pkt.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit ea632882dacf4ec21f84fa73ebff7d89d46fbeb3
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Oct 18 18:34:41 2017 +0530
-
-    staging: fsl_ppfe/eth: fix read/write/ack idx issue
-
-    While fixing checkpatch errors some of the index increments
-    were commented out. They are enabled.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit 75dc5856eafe3ec988aa52f498ad683332e5a528
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Fri Oct 27 11:20:47 2017 +0530
-
-    staging: fsl_ppfe/eth: Make phy_ethtool_ksettings_get return void
-
-    Make return value void since function never return meaningful value
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit fd60dff2329a4c20f5638147db315879d4b92097
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Nov 15 13:45:27 2017 +0530
-
-    staging: fsl_ppfe/eth: add function to update tmu credits
-
-    __hif_lib_update_credit function is used to update the tmu credits.
-    If tx_qos is set, tmu credit is updated based on the number of packets
-    transmitted by tmu.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-    Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
-
-commit 259418d3755afeabca062df4c177cb6617be7e2b
-Author: Kavi Akhila-B46177 <akhila.kavi@nxp.com>
-Date:   Thu Nov 2 12:05:35 2017 +0530
-
-    staging: fsl_ppfe/eth: Avoid packet drop at TMU queues
-
-    Added flow control between TMU queues and PFE Linux driver,
-    based on TMU credits availability.
-    Added tx_qos module parameter to control this behavior.
-    Use queue-0 as default queue to transmit packets.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-    Signed-off-by: Akhila Kavi <akhila.kavi@nxp.com>
-    Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
-
-commit 48f8aa50bdcccdec699550d10e274711f9f8cb4d
-Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Date:   Wed Nov 29 12:08:00 2017 +0530
-
-    staging: fsl_ppfe/eth: Enable PFE in clause 45 mode
-
-    when we opearate in clause 45 mode, we need to call
-    the function get_phy_device() with its 3rd argument as
-    "true" and then the resultant phy device needs to be
-    register with phy layer via phy_device_register()
-
-    Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-
-commit 217cf01a1eb7c0a1f44c250ab05bb832287069ca
-Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Date:   Wed Nov 29 12:21:43 2017 +0530
-
-    staging: fsl_ppfe/eth: Disable autonegotiation for 2.5G SGMII
-
-    PCS initialization sequence for 2.5G SGMII interface governs
-    auto negotiation to be in disabled mode
-
-    Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-
-commit 0758955e5d8be44260c3b6877ff78e18c2dc2706
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Thu Mar 8 13:58:38 2018 +0530
-
-    staging: fsl_ppfe/eth: calculate PFE_PKT_SIZE with SKB_DATA_ALIGN
-
-    pfe packet size was calculated without considering skb data alignment
-    and this resulted in jumbo frames crashing kernel when the
-    cacheline size increased from 64 to 128 bytes with
-    commit 97303480753e ("arm64: Increase the max granular size").
-
-    Modify pfe packet size caclulation to include skb data alignment of
-    sizeof(struct skb_shared_info).
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit d336c470781a28fe44a494b4f537a4dbac9fd1dd
-Author: Akhil Goyal <akhil.goyal@nxp.com>
-Date:   Fri Apr 13 15:41:28 2018 +0530
-
-    staging: fsl_ppfe/eth: support for userspace networking
-
-    This patch adds the userspace mode support to fsl_ppfe network driver.
-    In the new mode, basic hardware initialization is performed in kernel, while
-    the datapath and HIF handling is the responsibility of the userspace.
-
-    The new command line parameter is added to initialize the ppfe module
-    in userspace mode. By default the module remains in kernelspace networking
-    mode.
-    To enable userspace mode, use "insmod pfe.ko us=1"
-
-    Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
-    Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
-
-commit 30f97a6ae76cf7a284fee4b8ad30bce24568ac53
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Mon Apr 30 11:40:01 2018 +0530
-
-    staging: fsl_ppfe/eth: unregister netdev after pfe_phy_exit
-
-    rmmod pfe.ko throws below warning:
-
-    kernfs: can not remove 'phydev', no directory
-    ------------[ cut here ]------------
-    WARNING: CPU: 0 PID: 2230 at fs/kernfs/dir.c:1481
-    kernfs_remove_by_name_ns+0x90/0xa0
-
-    This is caused when the unregistered netdev structure is accessed to
-    disconnect phy.
-
-    Resolve the issue by unregistering netdev after disconnecting phy.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit 1b7daa665cd53fe51f19689c5b209fd89551f131
-Author: anuj batham <anuj.batham@nxp.com>
-Date:   Fri Apr 27 14:38:09 2018 +0530
-
-    staging: fsl_ppfe/eth: HW parse results for DPDK
-
-    HW Parse results are included in the packet headroom.
-    Length and Offset calculation now accommodates parse info size.
-
-    Signed-off-by: Archana Madhavan <archana.madhavan@nxp.com>
-
-commit 0aeb9981d44aad6a45eb8f3ead37f91258be173f
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Jun 20 10:22:32 2018 +0530
-
-    staging: fsl_ppfe/eth: reorganize pfe_netdev_ops
-
-    Reorganize members of struct pfe_netdev_ops to match with the order
-    of members in struct net_device_ops defined in include/linux/netdevice.h
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit 1cbccc5028c337e7c88bf61cf89038cfad449d34
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Jun 20 10:22:50 2018 +0530
-
-    staging: fsl_ppfe/eth: use mask for rx max frame len
-
-    Define and use PFE_RCR_MAX_FL_MASK to properly set Rx max frame
-    length of MAC Receive Control Register.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit d8c8ed721470bd47ad5414d8fdc5d093cdd247f7
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Jun 20 10:23:01 2018 +0530
-
-    staging: fsl_ppfe/eth: define pfe ndo_change_mtu function
-
-    Define ndo_change_mtu function for pfe. This sets the max Rx frame
-    length to the new mtu.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit f5f50edda84cf9305db06310536525c206970d6c
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Jun 20 10:23:16 2018 +0530
-
-    staging: fsl_ppfe/eth: remove jumbo frame enable from gemac init
-
-    MAC Receive Control Register was configured to allow jumbo frames.
-    This is removed as jumbo frames can be supported anytime by changing
-    mtu which will in turn modify MAX_FL field of MAC RCR.
-    Jumbo frames caused pfe to hang on LS1012A rev 1.0 Silicon due to
-    erratum A-010897.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit 53e3c57af87d72ee0299a723499bd911cb1ed25a
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Jun 20 10:23:32 2018 +0530
-
-    staging: fsl_ppfe/eth: disable CRC removal
-
-    Disable CRC removal from the packet, so that packets are forwarded
-    as is to Linux.
-    CRC configuration in MAC will be reflected in the packet received
-    to Linux.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit eb55f7878a6ece7edbecd648e147a5683da18c76
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Jun 20 10:23:41 2018 +0530
-
-    staging: fsl_ppfe/eth: handle ls1012a errata_a010897
-
-    On LS1012A rev 1.0, Jumbo frames are not supported as it causes
-    the PFE controller to hang. A reset of the entire chip is required
-    to resume normal operation.
-
-    To handle this errata, frames with length > 1900 are truncated for
-    rev 1.0 of LS1012A.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit c7b4f5f8f74925ce1d209ee4fcd5973d5cc5b61c
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Thu Oct 4 09:38:34 2018 +0530
-
-    staging: fsl_ppfe/eth: replace magic numbers
-
-    Replace magic numbers and some cosmetic changes.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit c0ed379aa248dd70b2acf5dd8908bec1f6de5487
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Thu Oct 4 09:39:00 2018 +0530
-
-    staging: fsl_ppfe/eth: resolve indentation warning
-
-    Resolve the following indentation warning:
-
-    drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c:
-    In function ‘pfe_get_gemac_if_proprties’:
-    drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c:96:2:
-    warning: this ‘else’ clause does not guard...
-    [-Wmisleading-indentation]
-      else
-      ^~~~
-    drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c:98:3:
-    note: ...this statement, but the latter is misleadingly indented as
-    if it were guarded by the ‘else’
-       pdata->ls1012a_eth_pdata[port].mdio_muxval = phy_id;
-       ^~~~~
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit c509cb585af2848dbb4ab194bf0fa435e356cb0a
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Thu Oct 4 09:38:17 2018 +0530
-
-    staging: fsl_ppfe/eth: add fixed-link support
-
-    In cases where MAC is not connected to a normal MDIO-managed PHY
-    device, and instead to a switch, it is configured as a "fixed-link".
-    Code to handle this scenario is added here.
-
-    phy_node in the dtb is checked to identify a fixed-link.
-    On identification of a fixed-link, it is registered and connected.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit 5e93b6ed52d4cdce12a481866c6f211299940734
-Author: Shreyansh Jain <shreyansh.jain@nxp.com>
-Date:   Wed Jun 6 14:19:34 2018 +0530
-
-    staging: fsl_ppfe: add support for a char dev for link status
-
-    Read and IOCTL support is added. Application would need to open,
-    read/ioctl the /dev/pfe_us_cdev device.
-    select is pending as it requires a wait_queue.
-
-    Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit 48e064df94157b0c34f2d75e164ea5c7f4970b7b
-Author: Akhil Goyal <akhil.goyal@nxp.com>
-Date:   Thu Jul 5 20:14:21 2018 +0530
-
-    staging: fsl_ppfe: enable hif event from userspace
-
-    HIF interrupts are enabled using ioctl from user space,
-    and epoll wait from user space wakes up when there is an HIF
-    interrupt.
-
-    Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
-
-commit d16d91d3250abec31422b28ff04a973b8b3d73c5
-Author: Akhil Goyal <akhil.goyal@nxp.com>
-Date:   Fri Jul 20 16:43:25 2018 +0530
-
-    staging: fsl_ppfe: performance tuning for user space
-
-    interrupt coalescing of 100 usec is added.
-
-    Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
-    Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
-
-commit eadb4c9d3e37c44659284fc9190d7e4f04b12aa0
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Tue Nov 20 21:50:23 2018 +0530
-
-    staging: fsl_ppfe/eth: Update to use SPDX identifiers
-
-    Replace license text with corresponding SPDX identifiers and update the
-    format of existing SPDX identifiers to follow the new guideline
-    Documentation/process/license-rules.rst.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit a468be7bda6fd98afab1cccb4e7151f23ca096e9
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Tue Nov 20 21:50:40 2018 +0530
-
-    staging: fsl_ppfe/eth: misc clean up
-
-    - remove redundant hwfeature init
-    - remove unused vars from ls1012a_eth_platform_data
-    - To handle ls1012a errata_a010897, PPFE driver requires GUTS driver
-    to be compiled in. Select FSL_GUTS when PPFE driver is compiled.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit 0e37bfbeda9510688ad987251aa07e3c88d6ba41
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Tue Nov 20 21:50:51 2018 +0530
-
-    staging: fsl_ppfe/eth: reorganize platform phy parameters
-
-    - Use "phy-handle" and of_* functions to get phy node and fixed-link
-    parameters
-
-    - Reorganize phy parameters and initialize them only if phy-handle
-    or fixed-link is defined in the dtb.
-
-    - correct typo pfe_get_gemac_if_proprties to pfe_get_gemac_if_properties
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit c8703ab06e644e853b12baf082dd703f6a4440a5
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Fri Nov 23 23:58:28 2018 +0530
-
-    staging: fsl_ppfe/eth: support single interface initialization
-
-    - arrange members of struct mii_bus in sequence matching phy.h
-    - if mdio node is defined, use of_mdiobus_register to register
-      child nodes (phy devices) available on the mdio bus.
-    - remove of_phy_register_fixed_link from pfe_phy_init as it is being
-      handled in pfe_get_gemac_if_properties
-    - remove mdio enabled check
-    - skip phy init, if no PHY or fixed-link
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit 89804e2d74002d01ea3f174048176e498298329a
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Tue Nov 20 21:51:53 2018 +0530
-
-    net: fsl_ppfe: update dts properties for phy
-
-    Use commonly used phy-handle property and mdio subnode to handle
-    phy properties.
-
-    Deprecate bindings fsl,gemac-phy-id & fsl,pfe-phy-if-flags.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit 5b0cc262ba7791fb0fae1f81f9619f54a15a75ba
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Fri Dec 7 19:30:03 2018 +0530
-
-    staging: fsl_ppfe/eth: remove unused code
-
-    - remove gemac-bus-id related code that is unused.
-    - remove unused prototype gemac_set_mdc_div.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit a5a237f331ab7fcd85b95466f481ddb7023aecc3
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Mon Dec 10 10:22:33 2018 +0530
-
-    staging: fsl_ppfe/eth: separate mdio init from mac init
-
-    - separate mdio initialization from mac initialization
-    - Define pfe_mdio_priv_s structure to hold mii_bus structure and other
-      related data.
-    - Modify functions to work with the separted mdio init model.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit 262a03c082de5a93efd7f54bec48b39cda9042a8
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Mar 27 13:25:57 2019 +0530
-
-    staging: fsl_ppfe/eth: adapt to link mode based phydev changes
-
-    Setting link mode bits have changed with the integration of
-    commit (3c1bcc8 net: ethernet: Convert phydev advertize and
-    supported from u32 to link mode). Adapt to the new method of
-    setting and clearing the link mode bits.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit 75f911d8ae45215f1c188191da92905ad3f7ad4a
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Mar 27 19:31:35 2019 +0530
-
-    staging: fsl_ppfe/eth: use generic soc_device infra instead of fsl_guts_get_svr()
-
-    Commit ("soc: fsl: guts: make fsl_guts_get_svr() static") has
-    made fsl_guts_get_svr() static and hence use generic soc_device
-    infrastructure to check SoC revision.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit 0a0ca3d898d15b3d7a206597a68f28134d4dfebd
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Tue Mar 26 16:52:22 2019 +0530
-
-    staging: fsl_ppfe/eth: use memremap() to map RAM area used by PFE
-
-    RAM area used by PFE should be mapped using memremap() instead of
-    directly traslating physical addr to virtual. This will ensure proper
-    checks are done before the area is used.
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-
-commit bfc0c2fedb76ad9c888db421b435d51e33fe276a
-Author: Li Yang <leoyang.li@nxp.com>
-Date:   Tue Jun 11 18:24:37 2019 -0500
-
-    staging: fsl_ppfe/eth: remove 'fallback' argument from dev->ndo_select_queue()
-
-    To be consistent with upstream API change.
-
-    Signed-off-by: Li Yang <leoyang.li@nxp.com>
-
-commit cfd0841983961067efe69379371ddcb49b230dac
-Author: Ting Liu <ting.liu@nxp.com>
-Date:   Mon Jun 17 09:27:53 2019 +0200
-
-    staging: fsl_ppfe/eth: prefix header search paths with $(srctree)/
-
-    Currently, the rules for configuring search paths in Kbuild have
-    changed: https://lkml.org/lkml/2019/5/13/37
-
-    This will lead the below error:
-
-    fatal error: pfe/pfe.h: No such file or directory
-
-    Fix it by adding $(srctree)/ prefix to the search paths.
-
-    Signed-off-by: Ting Liu <ting.liu@nxp.com>
-
-commit 4be722099e4b6bdff2e683234ffaa2dc62fc773d
-Author: Calvin Johnson <calvin.johnson@nxp.com>
-Date:   Wed Nov 1 11:11:30 2017 +0530
-
-    staging: fsl_ppfe/eth: add pfe support to Kconfig and Makefile
-
-    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
-    [ Aisheng: fix minor conflict due to removed VBOXSF_FS ]
-    Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
-
-commit 5a2c9482ec3959dc2010f99897359b9e4006d2a4
-Author: Nagesh Koneti <koneti.nagesh@nxp.com>
-Date:   Wed Sep 25 12:01:19 2019 +0530
-
-    staging: fsl_ppfe/eth: Disable termination of CRC fwd.
-
-    LS1012A MAC PCS block has an erratum that is seen with specific PHY AR803x.
-    The issue is triggered by the (spec-compliant) operation of the AR803x PHY
-    on the LS1012A-FRWY board.Due to this, good FCS packet is reported as error
-    packet by MAC, so for these error packets FCS should be validated and
-    discard only real error packets in PFE Rx packet path.
-
-    Signed-off-by: Nagesh Koneti <koneti.nagesh@nxp.com>
-    Signed-off-by: Nagesh Koneti <“koneti.nagesh@nxp.com”>
-
-commit 36344cfc28f4cbdf606330ab8929e10d0778a087
-Author: Li Yang <leoyang.li@nxp.com>
-Date:   Sun Dec 8 18:19:18 2019 -0600
-
-    net: ppfe: Cope with of_get_phy_mode() API change
-
-    Signed-off-by: Li Yang <leoyang.li@nxp.com>
-
-commit ee2a796cf8990ac06f329c580f18fffefbac6a9a
-Author: Anji Jagarlmudi <anji.jagarlmudi@nxp.com>
-Date:   Wed Jan 8 19:06:12 2020 +0530
-
-    staging: fsl_ppfe/eth: Enhance error checking in platform probe
-
-    Fix the kernel crash when MAC addr is not passed in dtb.
-
-    Signed-off-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com>
-
-commit 2e8ca14ea6cc8d6816f2a445f3610f6b5b852e7c
-Author: Anji Jagarlmudi <anji.jagarlmudi@nxp.com>
-Date:   Mon Apr 6 19:46:05 2020 +0530
-
-    staging: fsl_ppfe/eth: reject unsupported coalescing params
-
-    Set ethtool_ops->supported_coalesce_params to let
-    the core reject unsupported coalescing parameters.
-
-    Signed-off-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com>
-
-commit 7ce4dd75c94d8a7dbe4e4ad747b4ddc5be6d83b4
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Sat Mar 28 00:30:53 2020 +0530
-
-    staging: fsl_ppfe/eth:check "reg" property before pfe_get_gemac_if_properties()
-
-    It has been observed that the function pfe_get_gemac_if_properties() is
-    been called blindly for the next two child nodes. There might be some
-    cases where it may go wrong and that lead to missing interfaces.
-    with these changes it is ensured thats not the case.
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-    Signed-off-by: Anji J <anji.jagarlmudi@nxp.com>
-
-commit 7ba7cfb799c8928f4963f86a1ad47e2dd56022b2
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Sat Mar 28 00:34:13 2020 +0530
-
-    staging: fsl_ppfe/eth: "struct firmware" dereference is reduced in many functions
-
-    firmware structure's data variable is the actual elf data. It has been
-    dereferenced in multiple functions and this has been reduced.
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-    Signed-off-by: Anji J <anji.jagarlmudi@nxp.com>
-
-commit 443538bb09b979fcc98a58e18a3eb8cebe25ad4f
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Sun Mar 29 18:05:50 2020 +0530
-
-    staging: fsl_ppfe/eth: LF-27 load pfe binaries from FDT
-
-    FDT prepared in uboot now has pfe firmware part of it.
-    These changes will read the firmware by default from it and tries to load
-    the elf into the PFE PEs. This help build the pfe driver pasrt of kernel.
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-    Signed-off-by: Anji J <anji.jagarlmudi@nxp.com>
-
-commit 2b1f551c2aee4550ffca5f86031bc4f5e6ccb848
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Tue Jun 9 15:33:42 2020 +0530
-
-    staging: fsl_ppfe/eth: proper handling for RGMII delay mode
-
-    The correct setting for the RGMII ports on LS1012ARDB is to
-    enable delay on both Tx and Rx. So the phy mode to be matched
-    is PHY_INTERFACE_MODE_RGMII_ID.
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-    Signed-off-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com>
-
-commit a95d84b87e743bd7c57b287901524f2cffbf38d7
-Author: Dong Aisheng <aisheng.dong@nxp.com>
-Date:   Wed Jul 15 16:06:24 2020 +0800
-
-    LF-1762-2 staging: fsl_ppfe: replace '---help---' in Kconfig files with 'help'
-
-    Update Kconfig to cope with upstream change
-    commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
-    '---help---'").
-
-    Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
-
-commit 546ef027c2b0768517d903429d56bcd89b919e6d
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Wed Jul 15 10:36:07 2020 +0530
-
-    staging: fsl_ppfe/eth: Nesting level does not match indentation
-
-    corrected nesting level
-    LF-1661 and Coverity CID: 8879316
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit c76a95f776e0f3e1a2c8abc1748c662151e29be5
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Wed Jul 15 11:19:57 2020 +0530
-
-    staging: fsl_ppfe/eth: Initialized scalar variable
-
-    Proper initialization of scalar variable
-    LF-1657 and Coverity CID: 3335133
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit f48286af915f664c15aa327aaf6d9b61d33eea67
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Wed Jul 15 11:47:50 2020 +0530
-
-    staging: fsl_ppfe/eth: misspelt variable name
-
-    variable name corrected
-    LF-1656 and Coverity CID: 3335119
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit a5e006f71fce8e76831704b31218f3d57c0b9924
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Wed Jul 15 12:10:47 2020 +0530
-
-    staging: fsl_ppfe/eth: Avoiding out-of-bound writes
-
-    avoid out-of-bound writes with proper error handling
-    LF-1654, LF-1652 and Coverity CID: 3335106, 3335090
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit 957fde83420b6a74a5e96b2f27183274b04211d9
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Wed Jul 15 13:09:35 2020 +0530
-
-    staging: fsl_ppfe/eth: Initializing scalar variable
-
-    proper initialization of scalar variable.
-    LF-1653 and Coverity CID: 3335101
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit fae95666a4c992b7f9035ee978e3e289495cbd47
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Wed Jul 15 13:45:50 2020 +0530
-
-    staging: fsl_ppfe/eth: checking return value
-
-    proper checks added and handled for return value.
-    LF-1644 and Coverity CID: 241888
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit 5bf7baddb22ecafd6064c9062a804bcd17a326cc
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Wed Jul 15 14:04:10 2020 +0530
-
-    staging: fsl_ppfe/eth: Avoid out-of-bound access
-
-    proper handling to avoid out-of-bound access
-    LF-1642, LF-1641 and Coverity CID: 240910, 240891
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit b15d480d66277fc00bc610a91af56263733a4e13
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Fri Jul 31 10:19:00 2020 +0530
-
-    staging: fsl_ppfe/eth: Avoiding out-of-bound writes
-
-    avoid out-of-bound writes with proper error handling
-    LF-1654, LF-1652 and Coverity CID: 3335106, 3335090
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit 188992fc4d4173c6bb36e924b5833bb092f7d602
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Fri Jul 31 10:23:59 2020 +0530
-
-    staging: fsl_ppfe/eth: return value init in error case
-
-    proper err return in error case.
-    LF-1806 and Coverity CID: 10468592
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit 26d6dd0bd1331dd07764914033fd8e98777fc165
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Thu Aug 13 12:04:48 2020 +0530
-
-    staging: fsl_ppfe/eth: Avoid recursion in header inclusion
-
-    Avoiding header inclusions that are not necessary and also that are
-    causing header inclusion recursion.
-
-    LF-2102 and Coverity CID: 240838
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit f18618582d078b87c9ee2e93ebbffee44cd76ec0
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Thu Aug 13 12:28:25 2020 +0530
-
-    staging: fsl_ppfe/eth: Avoiding return value overwrite
-
-    avoid return value overwrite at the end of function.
-    LF-2136, LF-2137 and Coverity CID: 8879341, 8879364
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit 4cd4e5f325516d91c630311af4d36472ce19124e
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Wed Sep 9 17:50:10 2020 +0530
-
-    staging: fsl_ppfe/eth: LF-27 enabling PFE firmware load from FDT
-
-    The macro, "LOAD_PFEFIRMWARE_FROM_FILESYSTEM" is been disabled to load
-    the firmware from FDT by default. Enabling the macro will load the
-    firmware from filesystem.
-
-    Also, the Makefile is now tuned to build pfe as per the config option
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit 175a310323ccfab0025f2da56799bb3939b65c9d
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Thu Apr 9 18:17:48 2020 +0530
-
-    staging: fsl_ppfe/eth: Ethtool stats correction for IEEE_rx_drop counter
-
-    Due to carrier extended bug the phy counter IEEE_rx_drop counter is
-    incremented some times and phy reports the packet has crc error.
-    Because of this PFE revalidates all the packets that are marked crc
-    error by phy. Now, the counter phy reports is till bogus and this
-    patch decrements the counter by pfe revalidated (and are crc ok)
-    counter amount.
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-
-commit a4683911f7a7d71762a90dabf72faadab5766774
-Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
-Date:   Wed Sep 30 17:20:19 2020 +0530
-
-    staging: fsl_ppfe/eth: PFE firmware load enhancements
-
-    PFE driver enhancements to load the PE firmware from filesystem
-    when the firmware is not found in FDT.
-
-    Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
----
- .../devicetree/bindings/net/fsl_ppfe/pfe.txt  |  199 ++
- MAINTAINERS                                   |    8 +
- drivers/staging/Kconfig                       |    2 +
- drivers/staging/Makefile                      |    1 +
- drivers/staging/fsl_ppfe/Kconfig              |   21 +
- drivers/staging/fsl_ppfe/Makefile             |   20 +
- drivers/staging/fsl_ppfe/TODO                 |    2 +
- drivers/staging/fsl_ppfe/include/pfe/cbus.h   |   78 +
- .../staging/fsl_ppfe/include/pfe/cbus/bmu.h   |   55 +
- .../fsl_ppfe/include/pfe/cbus/class_csr.h     |  289 ++
- .../fsl_ppfe/include/pfe/cbus/emac_mtip.h     |  242 ++
- .../staging/fsl_ppfe/include/pfe/cbus/gpi.h   |   86 +
- .../staging/fsl_ppfe/include/pfe/cbus/hif.h   |  100 +
- .../fsl_ppfe/include/pfe/cbus/hif_nocpy.h     |   50 +
- .../fsl_ppfe/include/pfe/cbus/tmu_csr.h       |  168 ++
- .../fsl_ppfe/include/pfe/cbus/util_csr.h      |   61 +
- drivers/staging/fsl_ppfe/include/pfe/pfe.h    |  372 +++
- drivers/staging/fsl_ppfe/pfe_cdev.c           |  258 ++
- drivers/staging/fsl_ppfe/pfe_cdev.h           |   41 +
- drivers/staging/fsl_ppfe/pfe_ctrl.c           |  226 ++
- drivers/staging/fsl_ppfe/pfe_ctrl.h           |  100 +
- drivers/staging/fsl_ppfe/pfe_debugfs.c        |   99 +
- drivers/staging/fsl_ppfe/pfe_debugfs.h        |   13 +
- drivers/staging/fsl_ppfe/pfe_eth.c            | 2587 +++++++++++++++++
- drivers/staging/fsl_ppfe/pfe_eth.h            |  175 ++
- drivers/staging/fsl_ppfe/pfe_firmware.c       |  398 +++
- drivers/staging/fsl_ppfe/pfe_firmware.h       |   21 +
- drivers/staging/fsl_ppfe/pfe_hal.c            | 1517 ++++++++++
- drivers/staging/fsl_ppfe/pfe_hif.c            | 1064 +++++++
- drivers/staging/fsl_ppfe/pfe_hif.h            |  199 ++
- drivers/staging/fsl_ppfe/pfe_hif_lib.c        |  628 ++++
- drivers/staging/fsl_ppfe/pfe_hif_lib.h        |  229 ++
- drivers/staging/fsl_ppfe/pfe_hw.c             |  164 ++
- drivers/staging/fsl_ppfe/pfe_hw.h             |   15 +
- .../staging/fsl_ppfe/pfe_ls1012a_platform.c   |  383 +++
- drivers/staging/fsl_ppfe/pfe_mod.c            |  158 +
- drivers/staging/fsl_ppfe/pfe_mod.h            |  103 +
- drivers/staging/fsl_ppfe/pfe_perfmon.h        |   26 +
- drivers/staging/fsl_ppfe/pfe_sysfs.c          |  840 ++++++
- drivers/staging/fsl_ppfe/pfe_sysfs.h          |   17 +
- 40 files changed, 11015 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
- create mode 100644 drivers/staging/fsl_ppfe/Kconfig
- create mode 100644 drivers/staging/fsl_ppfe/Makefile
- create mode 100644 drivers/staging/fsl_ppfe/TODO
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/bmu.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/class_csr.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/emac_mtip.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/gpi.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/hif.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/hif_nocpy.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/util_csr.h
- create mode 100644 drivers/staging/fsl_ppfe/include/pfe/pfe.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_cdev.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_cdev.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_debugfs.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_debugfs.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_eth.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_eth.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_firmware.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_firmware.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hal.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hif.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hif.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hif_lib.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hif_lib.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hw.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_hw.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_mod.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_mod.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_perfmon.h
- create mode 100644 drivers/staging/fsl_ppfe/pfe_sysfs.c
- create mode 100644 drivers/staging/fsl_ppfe/pfe_sysfs.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
-@@ -0,0 +1,199 @@
-+=============================================================================
-+NXP Programmable Packet Forwarding Engine Device Bindings
-+
-+CONTENTS
-+  - PFE Node
-+  - Ethernet Node
-+
-+=============================================================================
-+PFE Node
-+
-+DESCRIPTION
-+
-+PFE Node has all the properties associated with Packet Forwarding Engine block.
-+
-+PROPERTIES
-+
-+- compatible
-+		Usage: required
-+		Value type: <stringlist>
-+		Definition: Must include "fsl,pfe"
-+
-+- reg
-+		Usage: required
-+		Value type: <prop-encoded-array>
-+		Definition: A standard property.
-+		Specifies the offset of the following registers:
-+		- PFE configuration registers
-+		- DDR memory used by PFE
-+
-+- fsl,pfe-num-interfaces
-+		Usage: required
-+		Value type: <u32>
-+		Definition: Must be present. Value can be either one or two.
-+
-+- interrupts
-+		Usage: required
-+		Value type: <prop-encoded-array>
-+		Definition: Three interrupts are specified in this property.
-+		- HIF interrupt
-+		- HIF NO COPY interrupt
-+		- Wake On LAN interrupt
-+
-+- interrupt-names
-+		Usage: required
-+		Value type: <stringlist>
-+		Definition: Following strings are defined for the 3 interrupts.
-+		"pfe_hif" - HIF interrupt
-+		"pfe_hif_nocpy" - HIF NO COPY interrupt
-+		"pfe_wol" - Wake On LAN interrupt
-+
-+- memory-region
-+		Usage: required
-+		Value type: <phandle>
-+		Definition: phandle to a node describing reserved memory used by pfe.
-+		Refer:- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-+
-+- fsl,pfe-scfg
-+		Usage: required
-+		Value type: <phandle>
-+		Definition: phandle for scfg.
-+
-+- fsl,rcpm-wakeup
-+		Usage: required
-+		Value type: <phandle>
-+		Definition: phandle for rcpm.
-+
-+- clocks
-+		Usage: required
-+		Value type: <phandle>
-+		Definition: phandle for clockgen.
-+
-+- clock-names
-+		Usage: required
-+		Value type: <string>
-+		Definition: phandle for clock name.
-+
-+EXAMPLE
-+
-+pfe: pfe@04000000 {
-+	compatible = "fsl,pfe";
-+	reg =   <0x0 0x04000000 0x0 0xc00000>,	/* AXI 16M */
-+		<0x0 0x83400000 0x0 0xc00000>;  /* PFE DDR 12M */
-+	reg-names = "pfe", "pfe-ddr";
-+	fsl,pfe-num-interfaces = <0x2>;
-+	interrupts = <0 172 0x4>,    /* HIF interrupt */
-+		     <0 173 0x4>,    /*HIF_NOCPY interrupt */
-+		     <0 174 0x4>;    /* WoL interrupt */
-+	interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
-+	memory-region = <&pfe_reserved>;
-+	fsl,pfe-scfg = <&scfg 0>;
-+	fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
-+	clocks = <&clockgen 4 0>;
-+	clock-names = "pfe";
-+
-+	status = "okay";
-+	pfe_mac0: ethernet@0 {
-+	};
-+
-+	pfe_mac1: ethernet@1 {
-+	};
-+};
-+
-+=============================================================================
-+Ethernet Node
-+
-+DESCRIPTION
-+
-+Ethernet Node has all the properties associated with PFE used by platforms to
-+connect to PHY:
-+
-+PROPERTIES
-+
-+- compatible
-+		Usage: required
-+		Value type: <stringlist>
-+		Definition: Must include "fsl,pfe-gemac-port"
-+
-+- reg
-+		Usage: required
-+		Value type: <prop-encoded-array>
-+		Definition: A standard property.
-+		Specifies the gemacid of the interface.
-+
-+- fsl,gemac-bus-id
-+		Usage: required
-+		Value type: <u32>
-+		Definition: Must be present. Value should be the id of the bus
-+		connected to gemac.
-+
-+- fsl,gemac-phy-id (deprecated binding)
-+               Usage: required
-+               Value type: <u32>
-+               Definition: This binding shouldn't be used with new platforms.
-+	       Must be present. Value should be the id of the phy
-+               connected to gemac.
-+
-+- fsl,mdio-mux-val
-+		Usage: required
-+		Value type: <u32>
-+		Definition: Must be present. Value can be either 0 or 2 or 3.
-+		This value is used to configure the mux to enable mdio.
-+
-+- phy-mode
-+		Usage: required
-+		Value type: <string>
-+		Definition: Must include "sgmii"
-+
-+- fsl,pfe-phy-if-flags (deprecated binding)
-+               Usage: required
-+               Value type: <u32>
-+               Definition: This binding shouldn't be used with new platforms.
-+               Must be present. Value should be 0 by default.
-+               If there is not phy connected, this need to be 1.
-+
-+- phy-handle
-+		Usage: optional
-+		Value type: <phandle>
-+		Definition: phandle to the PHY device connected to this device.
-+
-+- mdio : A required subnode which specifies the mdio bus in the PFE and used as
-+a container for phy nodes according to ../phy.txt.
-+
-+EXAMPLE
-+
-+ethernet@0 {
-+	compatible = "fsl,pfe-gemac-port";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	reg = <0x0>;	/* GEM_ID */
-+	fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
-+	fsl,mdio-mux-val = <0x0>;
-+	phy-mode = "sgmii";
-+	phy-handle = <&sgmii_phy1>;
-+};
-+
-+
-+ethernet@1 {
-+	compatible = "fsl,pfe-gemac-port";
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	reg = <0x1>;	/* GEM_ID */
-+	fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
-+	fsl,mdio-mux-val = <0x0>;
-+	phy-mode = "sgmii";
-+	phy-handle = <&sgmii_phy2>;
-+};
-+
-+mdio@0 {
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+
-+	sgmii_phy1: ethernet-phy@2 {
-+		reg = <0x2>;
-+	};
-+
-+	sgmii_phy2: ethernet-phy@1 {
-+		reg = <0x1>;
-+	};
-+};
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -7068,6 +7068,14 @@ F:	drivers/ptp/ptp_qoriq.c
- F:	drivers/ptp/ptp_qoriq_debugfs.c
- F:	include/linux/fsl/ptp_qoriq.h
- 
-+FREESCALE QORIQ PPFE ETHERNET DRIVER
-+M:	Anji Jagarlmudi <anji.jagarlmudi@nxp.com>
-+M:	Calvin Johnson <calvin.johnson@nxp.com>
-+L:	netdev@vger.kernel.org
-+S:	Maintained
-+F:	drivers/staging/fsl_ppfe
-+F:	Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
-+
- FREESCALE QUAD SPI DRIVER
- M:	Han Xu <han.xu@nxp.com>
- L:	linux-spi@vger.kernel.org
---- a/drivers/staging/Kconfig
-+++ b/drivers/staging/Kconfig
-@@ -118,4 +118,6 @@ source "drivers/staging/wfx/Kconfig"
- 
- source "drivers/staging/hikey9xx/Kconfig"
- 
-+source "drivers/staging/fsl_ppfe/Kconfig"
-+
- endif # STAGING
---- a/drivers/staging/Makefile
-+++ b/drivers/staging/Makefile
-@@ -49,3 +49,4 @@ obj-$(CONFIG_KPC2000)		+= kpc2000/
- obj-$(CONFIG_QLGE)		+= qlge/
- obj-$(CONFIG_WFX)		+= wfx/
- obj-y				+= hikey9xx/
-+obj-$(CONFIG_FSL_PPFE)		+= fsl_ppfe/
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/Kconfig
-@@ -0,0 +1,21 @@
-+#
-+# Freescale Programmable Packet Forwarding Engine driver
-+#
-+config FSL_PPFE
-+	tristate "Freescale PPFE Driver"
-+	select FSL_GUTS
-+	default n
-+	help
-+	Freescale LS1012A SoC has a Programmable Packet Forwarding Engine.
-+	It provides two high performance ethernet interfaces.
-+	This driver initializes, programs and controls the PPFE.
-+	Use this driver to enable network connectivity on LS1012A platforms.
-+
-+if FSL_PPFE
-+
-+config FSL_PPFE_UTIL_DISABLED
-+	bool "Disable PPFE UTIL Processor Engine"
-+	help
-+	UTIL PE has to be enabled only if required.
-+
-+endif # FSL_PPFE
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/Makefile
-@@ -0,0 +1,20 @@
-+#
-+# Makefile for Freesecale PPFE driver
-+#
-+
-+ccflags-y +=  -I $(srctree)/$(src)/include  -I $(srctree)/$(src)
-+
-+obj-$(CONFIG_FSL_PPFE) += pfe.o
-+
-+pfe-y += pfe_mod.o \
-+	pfe_hw.o \
-+	pfe_firmware.o \
-+	pfe_ctrl.o \
-+	pfe_hif.o \
-+	pfe_hif_lib.o\
-+	pfe_eth.o \
-+	pfe_sysfs.o \
-+	pfe_debugfs.o \
-+	pfe_ls1012a_platform.o \
-+	pfe_hal.o \
-+	pfe_cdev.o
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/TODO
-@@ -0,0 +1,2 @@
-+TODO:
-+	- provide pfe pe monitoring support
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus.h
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _CBUS_H_
-+#define _CBUS_H_
-+
-+#define EMAC1_BASE_ADDR	(CBUS_BASE_ADDR + 0x200000)
-+#define EGPI1_BASE_ADDR	(CBUS_BASE_ADDR + 0x210000)
-+#define EMAC2_BASE_ADDR	(CBUS_BASE_ADDR + 0x220000)
-+#define EGPI2_BASE_ADDR	(CBUS_BASE_ADDR + 0x230000)
-+#define BMU1_BASE_ADDR	(CBUS_BASE_ADDR + 0x240000)
-+#define BMU2_BASE_ADDR	(CBUS_BASE_ADDR + 0x250000)
-+#define ARB_BASE_ADDR	(CBUS_BASE_ADDR + 0x260000)
-+#define DDR_CONFIG_BASE_ADDR	(CBUS_BASE_ADDR + 0x270000)
-+#define HIF_BASE_ADDR	(CBUS_BASE_ADDR + 0x280000)
-+#define HGPI_BASE_ADDR	(CBUS_BASE_ADDR + 0x290000)
-+#define LMEM_BASE_ADDR	(CBUS_BASE_ADDR + 0x300000)
-+#define LMEM_SIZE	0x10000
-+#define LMEM_END	(LMEM_BASE_ADDR + LMEM_SIZE)
-+#define TMU_CSR_BASE_ADDR	(CBUS_BASE_ADDR + 0x310000)
-+#define CLASS_CSR_BASE_ADDR	(CBUS_BASE_ADDR + 0x320000)
-+#define HIF_NOCPY_BASE_ADDR	(CBUS_BASE_ADDR + 0x350000)
-+#define UTIL_CSR_BASE_ADDR	(CBUS_BASE_ADDR + 0x360000)
-+#define CBUS_GPT_BASE_ADDR	(CBUS_BASE_ADDR + 0x370000)
-+
-+/*
-+ * defgroup XXX_MEM_ACCESS_ADDR PE memory access through CSR
-+ * XXX_MEM_ACCESS_ADDR register bit definitions.
-+ */
-+#define PE_MEM_ACCESS_WRITE	BIT(31)	/* Internal Memory Write. */
-+#define PE_MEM_ACCESS_IMEM	BIT(15)
-+#define PE_MEM_ACCESS_DMEM	BIT(16)
-+
-+/* Byte Enables of the Internal memory access. These are interpred in BE */
-+#define PE_MEM_ACCESS_BYTE_ENABLE(offset, size)	\
-+	({ typeof(size) size_ = (size);		\
-+	(((BIT(size_) - 1) << (4 - (offset) - (size_))) & 0xf) << 24; })
-+
-+#include "cbus/emac_mtip.h"
-+#include "cbus/gpi.h"
-+#include "cbus/bmu.h"
-+#include "cbus/hif.h"
-+#include "cbus/tmu_csr.h"
-+#include "cbus/class_csr.h"
-+#include "cbus/hif_nocpy.h"
-+#include "cbus/util_csr.h"
-+
-+/* PFE cores states */
-+#define CORE_DISABLE	0x00000000
-+#define CORE_ENABLE	0x00000001
-+#define CORE_SW_RESET	0x00000002
-+
-+/* LMEM defines */
-+#define LMEM_HDR_SIZE	0x0010
-+#define LMEM_BUF_SIZE_LN2	0x7
-+#define LMEM_BUF_SIZE	BIT(LMEM_BUF_SIZE_LN2)
-+
-+/* DDR defines */
-+#define DDR_HDR_SIZE	0x0100
-+#define DDR_BUF_SIZE_LN2	0xb
-+#define DDR_BUF_SIZE	BIT(DDR_BUF_SIZE_LN2)
-+
-+#endif /* _CBUS_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/bmu.h
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _BMU_H_
-+#define _BMU_H_
-+
-+#define BMU_VERSION	0x000
-+#define BMU_CTRL	0x004
-+#define BMU_UCAST_CONFIG	0x008
-+#define BMU_UCAST_BASE_ADDR	0x00c
-+#define BMU_BUF_SIZE	0x010
-+#define BMU_BUF_CNT	0x014
-+#define BMU_THRES	0x018
-+#define BMU_INT_SRC	0x020
-+#define BMU_INT_ENABLE	0x024
-+#define BMU_ALLOC_CTRL	0x030
-+#define BMU_FREE_CTRL	0x034
-+#define BMU_FREE_ERR_ADDR	0x038
-+#define BMU_CURR_BUF_CNT	0x03c
-+#define BMU_MCAST_CNT	0x040
-+#define BMU_MCAST_ALLOC_CTRL	0x044
-+#define BMU_REM_BUF_CNT	0x048
-+#define BMU_LOW_WATERMARK	0x050
-+#define BMU_HIGH_WATERMARK	0x054
-+#define BMU_INT_MEM_ACCESS	0x100
-+
-+struct BMU_CFG {
-+	unsigned long baseaddr;
-+	u32 count;
-+	u32 size;
-+	u32 low_watermark;
-+	u32 high_watermark;
-+};
-+
-+#define BMU1_BUF_SIZE	LMEM_BUF_SIZE_LN2
-+#define BMU2_BUF_SIZE	DDR_BUF_SIZE_LN2
-+
-+#define BMU2_MCAST_ALLOC_CTRL	(BMU2_BASE_ADDR + BMU_MCAST_ALLOC_CTRL)
-+
-+#endif /* _BMU_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/class_csr.h
-@@ -0,0 +1,289 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _CLASS_CSR_H_
-+#define _CLASS_CSR_H_
-+
-+/* @file class_csr.h.
-+ * class_csr - block containing all the classifier control and status register.
-+ * Mapped on CBUS and accessible from all PE's and ARM.
-+ */
-+#define CLASS_VERSION	(CLASS_CSR_BASE_ADDR + 0x000)
-+#define CLASS_TX_CTRL	(CLASS_CSR_BASE_ADDR + 0x004)
-+#define CLASS_INQ_PKTPTR	(CLASS_CSR_BASE_ADDR + 0x010)
-+
-+/* (ddr_hdr_size[24:16], lmem_hdr_size[5:0]) */
-+#define CLASS_HDR_SIZE	(CLASS_CSR_BASE_ADDR + 0x014)
-+
-+/* LMEM header size for the Classifier block.\ Data in the LMEM
-+ * is written from this offset.
-+ */
-+#define CLASS_HDR_SIZE_LMEM(off)	((off) & 0x3f)
-+
-+/* DDR header size for the Classifier block.\ Data in the DDR
-+ * is written from this offset.
-+ */
-+#define CLASS_HDR_SIZE_DDR(off)	(((off) & 0x1ff) << 16)
-+
-+#define CLASS_PE0_QB_DM_ADDR0	(CLASS_CSR_BASE_ADDR + 0x020)
-+
-+/* DMEM address of first [15:0] and second [31:16] buffers on QB side. */
-+#define CLASS_PE0_QB_DM_ADDR1	(CLASS_CSR_BASE_ADDR + 0x024)
-+
-+/* DMEM address of third [15:0] and fourth [31:16] buffers on QB side. */
-+#define CLASS_PE0_RO_DM_ADDR0	(CLASS_CSR_BASE_ADDR + 0x060)
-+
-+/* DMEM address of first [15:0] and second [31:16] buffers on RO side. */
-+#define CLASS_PE0_RO_DM_ADDR1	(CLASS_CSR_BASE_ADDR + 0x064)
-+
-+/* DMEM address of third [15:0] and fourth [31:16] buffers on RO side. */
-+
-+/* @name Class PE memory access. Allows external PE's and HOST to
-+ * read/write PMEM/DMEM memory ranges for each classifier PE.
-+ */
-+/* {sr_pe_mem_cmd[31], csr_pe_mem_wren[27:24], csr_pe_mem_addr[23:0]},
-+ * See \ref XXX_MEM_ACCESS_ADDR for details.
-+ */
-+#define CLASS_MEM_ACCESS_ADDR	(CLASS_CSR_BASE_ADDR + 0x100)
-+
-+/* Internal Memory Access Write Data [31:0] */
-+#define CLASS_MEM_ACCESS_WDATA	(CLASS_CSR_BASE_ADDR + 0x104)
-+
-+/* Internal Memory Access Read Data [31:0] */
-+#define CLASS_MEM_ACCESS_RDATA	(CLASS_CSR_BASE_ADDR + 0x108)
-+#define CLASS_TM_INQ_ADDR	(CLASS_CSR_BASE_ADDR + 0x114)
-+#define CLASS_PE_STATUS	(CLASS_CSR_BASE_ADDR + 0x118)
-+
-+#define CLASS_PHY1_RX_PKTS	(CLASS_CSR_BASE_ADDR + 0x11c)
-+#define CLASS_PHY1_TX_PKTS	(CLASS_CSR_BASE_ADDR + 0x120)
-+#define CLASS_PHY1_LP_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x124)
-+#define CLASS_PHY1_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x128)
-+#define CLASS_PHY1_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x12c)
-+#define CLASS_PHY1_L3_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x130)
-+#define CLASS_PHY1_V4_PKTS	(CLASS_CSR_BASE_ADDR + 0x134)
-+#define CLASS_PHY1_V6_PKTS	(CLASS_CSR_BASE_ADDR + 0x138)
-+#define CLASS_PHY1_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x13c)
-+#define CLASS_PHY1_TTL_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x140)
-+#define CLASS_PHY2_RX_PKTS	(CLASS_CSR_BASE_ADDR + 0x144)
-+#define CLASS_PHY2_TX_PKTS	(CLASS_CSR_BASE_ADDR + 0x148)
-+#define CLASS_PHY2_LP_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x14c)
-+#define CLASS_PHY2_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x150)
-+#define CLASS_PHY2_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x154)
-+#define CLASS_PHY2_L3_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x158)
-+#define CLASS_PHY2_V4_PKTS	(CLASS_CSR_BASE_ADDR + 0x15c)
-+#define CLASS_PHY2_V6_PKTS	(CLASS_CSR_BASE_ADDR + 0x160)
-+#define CLASS_PHY2_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x164)
-+#define CLASS_PHY2_TTL_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x168)
-+#define CLASS_PHY3_RX_PKTS	(CLASS_CSR_BASE_ADDR + 0x16c)
-+#define CLASS_PHY3_TX_PKTS	(CLASS_CSR_BASE_ADDR + 0x170)
-+#define CLASS_PHY3_LP_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x174)
-+#define CLASS_PHY3_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x178)
-+#define CLASS_PHY3_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x17c)
-+#define CLASS_PHY3_L3_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x180)
-+#define CLASS_PHY3_V4_PKTS	(CLASS_CSR_BASE_ADDR + 0x184)
-+#define CLASS_PHY3_V6_PKTS	(CLASS_CSR_BASE_ADDR + 0x188)
-+#define CLASS_PHY3_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x18c)
-+#define CLASS_PHY3_TTL_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x190)
-+#define CLASS_PHY1_ICMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x194)
-+#define CLASS_PHY1_IGMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x198)
-+#define CLASS_PHY1_TCP_PKTS	(CLASS_CSR_BASE_ADDR + 0x19c)
-+#define CLASS_PHY1_UDP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1a0)
-+#define CLASS_PHY2_ICMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1a4)
-+#define CLASS_PHY2_IGMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1a8)
-+#define CLASS_PHY2_TCP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1ac)
-+#define CLASS_PHY2_UDP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1b0)
-+#define CLASS_PHY3_ICMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1b4)
-+#define CLASS_PHY3_IGMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1b8)
-+#define CLASS_PHY3_TCP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1bc)
-+#define CLASS_PHY3_UDP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1c0)
-+#define CLASS_PHY4_ICMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1c4)
-+#define CLASS_PHY4_IGMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1c8)
-+#define CLASS_PHY4_TCP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1cc)
-+#define CLASS_PHY4_UDP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1d0)
-+#define CLASS_PHY4_RX_PKTS	(CLASS_CSR_BASE_ADDR + 0x1d4)
-+#define CLASS_PHY4_TX_PKTS	(CLASS_CSR_BASE_ADDR + 0x1d8)
-+#define CLASS_PHY4_LP_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x1dc)
-+#define CLASS_PHY4_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x1e0)
-+#define CLASS_PHY4_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x1e4)
-+#define CLASS_PHY4_L3_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x1e8)
-+#define CLASS_PHY4_V4_PKTS	(CLASS_CSR_BASE_ADDR + 0x1ec)
-+#define CLASS_PHY4_V6_PKTS	(CLASS_CSR_BASE_ADDR + 0x1f0)
-+#define CLASS_PHY4_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x1f4)
-+#define CLASS_PHY4_TTL_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x1f8)
-+
-+#define CLASS_PE_SYS_CLK_RATIO	(CLASS_CSR_BASE_ADDR + 0x200)
-+#define CLASS_AFULL_THRES	(CLASS_CSR_BASE_ADDR + 0x204)
-+#define CLASS_GAP_BETWEEN_READS	(CLASS_CSR_BASE_ADDR + 0x208)
-+#define CLASS_MAX_BUF_CNT	(CLASS_CSR_BASE_ADDR + 0x20c)
-+#define CLASS_TSQ_FIFO_THRES	(CLASS_CSR_BASE_ADDR + 0x210)
-+#define CLASS_TSQ_MAX_CNT	(CLASS_CSR_BASE_ADDR + 0x214)
-+#define CLASS_IRAM_DATA_0	(CLASS_CSR_BASE_ADDR + 0x218)
-+#define CLASS_IRAM_DATA_1	(CLASS_CSR_BASE_ADDR + 0x21c)
-+#define CLASS_IRAM_DATA_2	(CLASS_CSR_BASE_ADDR + 0x220)
-+#define CLASS_IRAM_DATA_3	(CLASS_CSR_BASE_ADDR + 0x224)
-+
-+#define CLASS_BUS_ACCESS_ADDR	(CLASS_CSR_BASE_ADDR + 0x228)
-+
-+#define CLASS_BUS_ACCESS_WDATA	(CLASS_CSR_BASE_ADDR + 0x22c)
-+#define CLASS_BUS_ACCESS_RDATA	(CLASS_CSR_BASE_ADDR + 0x230)
-+
-+/* (route_entry_size[9:0], route_hash_size[23:16]
-+ * (this is actually ln2(size)))
-+ */
-+#define CLASS_ROUTE_HASH_ENTRY_SIZE	(CLASS_CSR_BASE_ADDR + 0x234)
-+
-+#define CLASS_ROUTE_ENTRY_SIZE(size)	 ((size) & 0x1ff)
-+#define CLASS_ROUTE_HASH_SIZE(hash_bits) (((hash_bits) & 0xff) << 16)
-+
-+#define CLASS_ROUTE_TABLE_BASE	(CLASS_CSR_BASE_ADDR + 0x238)
-+
-+#define CLASS_ROUTE_MULTI	(CLASS_CSR_BASE_ADDR + 0x23c)
-+#define CLASS_SMEM_OFFSET	(CLASS_CSR_BASE_ADDR + 0x240)
-+#define CLASS_LMEM_BUF_SIZE	(CLASS_CSR_BASE_ADDR + 0x244)
-+#define CLASS_VLAN_ID	(CLASS_CSR_BASE_ADDR + 0x248)
-+#define CLASS_BMU1_BUF_FREE	(CLASS_CSR_BASE_ADDR + 0x24c)
-+#define CLASS_USE_TMU_INQ	(CLASS_CSR_BASE_ADDR + 0x250)
-+#define CLASS_VLAN_ID1	(CLASS_CSR_BASE_ADDR + 0x254)
-+
-+#define CLASS_BUS_ACCESS_BASE	(CLASS_CSR_BASE_ADDR + 0x258)
-+#define CLASS_BUS_ACCESS_BASE_MASK	(0xFF000000)
-+/* bit 31:24 of PE peripheral address are stored in CLASS_BUS_ACCESS_BASE */
-+
-+#define CLASS_HIF_PARSE	(CLASS_CSR_BASE_ADDR + 0x25c)
-+
-+#define CLASS_HOST_PE0_GP	(CLASS_CSR_BASE_ADDR + 0x260)
-+#define CLASS_PE0_GP	(CLASS_CSR_BASE_ADDR + 0x264)
-+#define CLASS_HOST_PE1_GP	(CLASS_CSR_BASE_ADDR + 0x268)
-+#define CLASS_PE1_GP	(CLASS_CSR_BASE_ADDR + 0x26c)
-+#define CLASS_HOST_PE2_GP	(CLASS_CSR_BASE_ADDR + 0x270)
-+#define CLASS_PE2_GP	(CLASS_CSR_BASE_ADDR + 0x274)
-+#define CLASS_HOST_PE3_GP	(CLASS_CSR_BASE_ADDR + 0x278)
-+#define CLASS_PE3_GP	(CLASS_CSR_BASE_ADDR + 0x27c)
-+#define CLASS_HOST_PE4_GP	(CLASS_CSR_BASE_ADDR + 0x280)
-+#define CLASS_PE4_GP	(CLASS_CSR_BASE_ADDR + 0x284)
-+#define CLASS_HOST_PE5_GP	(CLASS_CSR_BASE_ADDR + 0x288)
-+#define CLASS_PE5_GP	(CLASS_CSR_BASE_ADDR + 0x28c)
-+
-+#define CLASS_PE_INT_SRC	(CLASS_CSR_BASE_ADDR + 0x290)
-+#define CLASS_PE_INT_ENABLE	(CLASS_CSR_BASE_ADDR + 0x294)
-+
-+#define CLASS_TPID0_TPID1	(CLASS_CSR_BASE_ADDR + 0x298)
-+#define CLASS_TPID2	(CLASS_CSR_BASE_ADDR + 0x29c)
-+
-+#define CLASS_L4_CHKSUM_ADDR	(CLASS_CSR_BASE_ADDR + 0x2a0)
-+
-+#define CLASS_PE0_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2a4)
-+#define CLASS_PE1_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2a8)
-+#define CLASS_PE2_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2ac)
-+#define CLASS_PE3_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2b0)
-+#define CLASS_PE4_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2b4)
-+#define CLASS_PE5_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2b8)
-+
-+#define CLASS_STATE	(CLASS_CSR_BASE_ADDR + 0x2bc)
-+
-+/* CLASS defines */
-+#define CLASS_PBUF_SIZE	0x100	/* Fixed by hardware */
-+#define CLASS_PBUF_HEADER_OFFSET	0x80	/* Can be configured */
-+
-+/* Can be configured */
-+#define CLASS_PBUF0_BASE_ADDR	0x000
-+/* Can be configured */
-+#define CLASS_PBUF1_BASE_ADDR	(CLASS_PBUF0_BASE_ADDR + CLASS_PBUF_SIZE)
-+/* Can be configured */
-+#define CLASS_PBUF2_BASE_ADDR	(CLASS_PBUF1_BASE_ADDR + CLASS_PBUF_SIZE)
-+/* Can be configured */
-+#define CLASS_PBUF3_BASE_ADDR	(CLASS_PBUF2_BASE_ADDR + CLASS_PBUF_SIZE)
-+
-+#define CLASS_PBUF0_HEADER_BASE_ADDR	(CLASS_PBUF0_BASE_ADDR + \
-+						CLASS_PBUF_HEADER_OFFSET)
-+#define CLASS_PBUF1_HEADER_BASE_ADDR	(CLASS_PBUF1_BASE_ADDR + \
-+						CLASS_PBUF_HEADER_OFFSET)
-+#define CLASS_PBUF2_HEADER_BASE_ADDR	(CLASS_PBUF2_BASE_ADDR + \
-+						CLASS_PBUF_HEADER_OFFSET)
-+#define CLASS_PBUF3_HEADER_BASE_ADDR	(CLASS_PBUF3_BASE_ADDR + \
-+						CLASS_PBUF_HEADER_OFFSET)
-+
-+#define CLASS_PE0_RO_DM_ADDR0_VAL	((CLASS_PBUF1_BASE_ADDR << 16) | \
-+						CLASS_PBUF0_BASE_ADDR)
-+#define CLASS_PE0_RO_DM_ADDR1_VAL	((CLASS_PBUF3_BASE_ADDR << 16) | \
-+						CLASS_PBUF2_BASE_ADDR)
-+
-+#define CLASS_PE0_QB_DM_ADDR0_VAL	((CLASS_PBUF1_HEADER_BASE_ADDR << 16) |\
-+						CLASS_PBUF0_HEADER_BASE_ADDR)
-+#define CLASS_PE0_QB_DM_ADDR1_VAL	((CLASS_PBUF3_HEADER_BASE_ADDR << 16) |\
-+						CLASS_PBUF2_HEADER_BASE_ADDR)
-+
-+#define CLASS_ROUTE_SIZE	128
-+#define CLASS_MAX_ROUTE_SIZE	256
-+#define CLASS_ROUTE_HASH_BITS	20
-+#define CLASS_ROUTE_HASH_MASK	(BIT(CLASS_ROUTE_HASH_BITS) - 1)
-+
-+/* Can be configured */
-+#define	CLASS_ROUTE0_BASE_ADDR	0x400
-+/* Can be configured */
-+#define CLASS_ROUTE1_BASE_ADDR	(CLASS_ROUTE0_BASE_ADDR + CLASS_ROUTE_SIZE)
-+/* Can be configured */
-+#define CLASS_ROUTE2_BASE_ADDR	(CLASS_ROUTE1_BASE_ADDR + CLASS_ROUTE_SIZE)
-+/* Can be configured */
-+#define CLASS_ROUTE3_BASE_ADDR	(CLASS_ROUTE2_BASE_ADDR + CLASS_ROUTE_SIZE)
-+
-+#define CLASS_SA_SIZE	128
-+#define CLASS_IPSEC_SA0_BASE_ADDR	0x600
-+/* not used */
-+#define CLASS_IPSEC_SA1_BASE_ADDR  (CLASS_IPSEC_SA0_BASE_ADDR + CLASS_SA_SIZE)
-+/* not used */
-+#define CLASS_IPSEC_SA2_BASE_ADDR  (CLASS_IPSEC_SA1_BASE_ADDR + CLASS_SA_SIZE)
-+/* not used */
-+#define CLASS_IPSEC_SA3_BASE_ADDR  (CLASS_IPSEC_SA2_BASE_ADDR + CLASS_SA_SIZE)
-+
-+/* generic purpose free dmem buffer, last portion of 2K dmem pbuf */
-+#define CLASS_GP_DMEM_BUF_SIZE	(2048 - (CLASS_PBUF_SIZE * 4) - \
-+				(CLASS_ROUTE_SIZE * 4) - (CLASS_SA_SIZE))
-+#define CLASS_GP_DMEM_BUF	((void *)(CLASS_IPSEC_SA0_BASE_ADDR + \
-+					CLASS_SA_SIZE))
-+
-+#define TWO_LEVEL_ROUTE		BIT(0)
-+#define PHYNO_IN_HASH		BIT(1)
-+#define HW_ROUTE_FETCH		BIT(3)
-+#define HW_BRIDGE_FETCH		BIT(5)
-+#define IP_ALIGNED		BIT(6)
-+#define ARC_HIT_CHECK_EN	BIT(7)
-+#define CLASS_TOE		BIT(11)
-+#define HASH_NORMAL		(0 << 12)
-+#define HASH_CRC_PORT		BIT(12)
-+#define HASH_CRC_IP		(2 << 12)
-+#define HASH_CRC_PORT_IP	(3 << 12)
-+#define QB2BUS_LE		BIT(15)
-+
-+#define TCP_CHKSUM_DROP		BIT(0)
-+#define UDP_CHKSUM_DROP		BIT(1)
-+#define IPV4_CHKSUM_DROP	BIT(9)
-+
-+/*CLASS_HIF_PARSE bits*/
-+#define HIF_PKT_CLASS_EN	BIT(0)
-+#define HIF_PKT_OFFSET(ofst)	(((ofst) & 0xF) << 1)
-+
-+struct class_cfg {
-+	u32 toe_mode;
-+	unsigned long route_table_baseaddr;
-+	u32 route_table_hash_bits;
-+	u32 pe_sys_clk_ratio;
-+	u32 resume;
-+};
-+
-+#endif /* _CLASS_CSR_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/emac_mtip.h
-@@ -0,0 +1,242 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _EMAC_H_
-+#define _EMAC_H_
-+
-+#include <linux/ethtool.h>
-+
-+#define EMAC_IEVENT_REG		0x004
-+#define EMAC_IMASK_REG		0x008
-+#define EMAC_R_DES_ACTIVE_REG	0x010
-+#define EMAC_X_DES_ACTIVE_REG	0x014
-+#define EMAC_ECNTRL_REG		0x024
-+#define EMAC_MII_DATA_REG	0x040
-+#define EMAC_MII_CTRL_REG	0x044
-+#define EMAC_MIB_CTRL_STS_REG	0x064
-+#define EMAC_RCNTRL_REG		0x084
-+#define EMAC_TCNTRL_REG		0x0C4
-+#define EMAC_PHY_ADDR_LOW	0x0E4
-+#define EMAC_PHY_ADDR_HIGH	0x0E8
-+#define EMAC_GAUR		0x120
-+#define EMAC_GALR		0x124
-+#define EMAC_TFWR_STR_FWD	0x144
-+#define EMAC_RX_SECTION_FULL	0x190
-+#define EMAC_RX_SECTION_EMPTY	0x194
-+#define EMAC_TX_SECTION_EMPTY	0x1A0
-+#define EMAC_TRUNC_FL		0x1B0
-+
-+#define RMON_T_DROP	0x200 /* Count of frames not cntd correctly */
-+#define RMON_T_PACKETS	0x204 /* RMON TX packet count */
-+#define RMON_T_BC_PKT	0x208 /* RMON TX broadcast pkts */
-+#define RMON_T_MC_PKT	0x20c /* RMON TX multicast pkts */
-+#define RMON_T_CRC_ALIGN	0x210 /* RMON TX pkts with CRC align err */
-+#define RMON_T_UNDERSIZE	0x214 /* RMON TX pkts < 64 bytes, good CRC */
-+#define RMON_T_OVERSIZE	0x218 /* RMON TX pkts > MAX_FL bytes good CRC */
-+#define RMON_T_FRAG	0x21c /* RMON TX pkts < 64 bytes, bad CRC */
-+#define RMON_T_JAB	0x220 /* RMON TX pkts > MAX_FL bytes, bad CRC */
-+#define RMON_T_COL	0x224 /* RMON TX collision count */
-+#define RMON_T_P64	0x228 /* RMON TX 64 byte pkts */
-+#define RMON_T_P65TO127	0x22c /* RMON TX 65 to 127 byte pkts */
-+#define RMON_T_P128TO255	0x230 /* RMON TX 128 to 255 byte pkts */
-+#define RMON_T_P256TO511	0x234 /* RMON TX 256 to 511 byte pkts */
-+#define RMON_T_P512TO1023	0x238 /* RMON TX 512 to 1023 byte pkts */
-+#define RMON_T_P1024TO2047	0x23c /* RMON TX 1024 to 2047 byte pkts */
-+#define RMON_T_P_GTE2048	0x240 /* RMON TX pkts > 2048 bytes */
-+#define RMON_T_OCTETS	0x244 /* RMON TX octets */
-+#define IEEE_T_DROP	0x248 /* Count of frames not counted crtly */
-+#define IEEE_T_FRAME_OK	0x24c /* Frames tx'd OK */
-+#define IEEE_T_1COL	0x250 /* Frames tx'd with single collision */
-+#define IEEE_T_MCOL	0x254 /* Frames tx'd with multiple collision */
-+#define IEEE_T_DEF	0x258 /* Frames tx'd after deferral delay */
-+#define IEEE_T_LCOL	0x25c /* Frames tx'd with late collision */
-+#define IEEE_T_EXCOL	0x260 /* Frames tx'd with excesv collisions */
-+#define IEEE_T_MACERR	0x264 /* Frames tx'd with TX FIFO underrun */
-+#define IEEE_T_CSERR	0x268 /* Frames tx'd with carrier sense err */
-+#define IEEE_T_SQE	0x26c /* Frames tx'd with SQE err */
-+#define IEEE_T_FDXFC	0x270 /* Flow control pause frames tx'd */
-+#define IEEE_T_OCTETS_OK	0x274 /* Octet count for frames tx'd w/o err */
-+#define RMON_R_PACKETS	0x284 /* RMON RX packet count */
-+#define RMON_R_BC_PKT	0x288 /* RMON RX broadcast pkts */
-+#define RMON_R_MC_PKT	0x28c /* RMON RX multicast pkts */
-+#define RMON_R_CRC_ALIGN	0x290 /* RMON RX pkts with CRC alignment err */
-+#define RMON_R_UNDERSIZE	0x294 /* RMON RX pkts < 64 bytes, good CRC */
-+#define RMON_R_OVERSIZE	0x298 /* RMON RX pkts > MAX_FL bytes good CRC */
-+#define RMON_R_FRAG	0x29c /* RMON RX pkts < 64 bytes, bad CRC */
-+#define RMON_R_JAB	0x2a0 /* RMON RX pkts > MAX_FL bytes, bad CRC */
-+#define RMON_R_RESVD_O	0x2a4 /* Reserved */
-+#define RMON_R_P64	0x2a8 /* RMON RX 64 byte pkts */
-+#define RMON_R_P65TO127	0x2ac /* RMON RX 65 to 127 byte pkts */
-+#define RMON_R_P128TO255	0x2b0 /* RMON RX 128 to 255 byte pkts */
-+#define RMON_R_P256TO511	0x2b4 /* RMON RX 256 to 511 byte pkts */
-+#define RMON_R_P512TO1023	0x2b8 /* RMON RX 512 to 1023 byte pkts */
-+#define RMON_R_P1024TO2047	0x2bc /* RMON RX 1024 to 2047 byte pkts */
-+#define RMON_R_P_GTE2048	0x2c0 /* RMON RX pkts > 2048 bytes */
-+#define RMON_R_OCTETS	0x2c4 /* RMON RX octets */
-+#define IEEE_R_DROP	0x2c8 /* Count frames not counted correctly */
-+#define IEEE_R_FRAME_OK	0x2cc /* Frames rx'd OK */
-+#define IEEE_R_CRC	0x2d0 /* Frames rx'd with CRC err */
-+#define IEEE_R_ALIGN	0x2d4 /* Frames rx'd with alignment err */
-+#define IEEE_R_MACERR	0x2d8 /* Receive FIFO overflow count */
-+#define IEEE_R_FDXFC	0x2dc /* Flow control pause frames rx'd */
-+#define IEEE_R_OCTETS_OK	0x2e0 /* Octet cnt for frames rx'd w/o err */
-+
-+#define EMAC_SMAC_0_0	0x500 /*Supplemental MAC Address 0 (RW).*/
-+#define EMAC_SMAC_0_1	0x504 /*Supplemental MAC Address 0 (RW).*/
-+
-+/* GEMAC definitions and settings */
-+
-+#define EMAC_PORT_0	0
-+#define EMAC_PORT_1	1
-+
-+/* GEMAC Bit definitions */
-+#define EMAC_IEVENT_HBERR		 0x80000000
-+#define EMAC_IEVENT_BABR		 0x40000000
-+#define EMAC_IEVENT_BABT		 0x20000000
-+#define EMAC_IEVENT_GRA			 0x10000000
-+#define EMAC_IEVENT_TXF			 0x08000000
-+#define EMAC_IEVENT_TXB			 0x04000000
-+#define EMAC_IEVENT_RXF			 0x02000000
-+#define EMAC_IEVENT_RXB			 0x01000000
-+#define EMAC_IEVENT_MII			 0x00800000
-+#define EMAC_IEVENT_EBERR		 0x00400000
-+#define EMAC_IEVENT_LC			 0x00200000
-+#define EMAC_IEVENT_RL			 0x00100000
-+#define EMAC_IEVENT_UN			 0x00080000
-+
-+#define EMAC_IMASK_HBERR                 0x80000000
-+#define EMAC_IMASK_BABR                  0x40000000
-+#define EMAC_IMASKT_BABT                 0x20000000
-+#define EMAC_IMASK_GRA                   0x10000000
-+#define EMAC_IMASKT_TXF                  0x08000000
-+#define EMAC_IMASK_TXB                   0x04000000
-+#define EMAC_IMASKT_RXF                  0x02000000
-+#define EMAC_IMASK_RXB                   0x01000000
-+#define EMAC_IMASK_MII                   0x00800000
-+#define EMAC_IMASK_EBERR                 0x00400000
-+#define EMAC_IMASK_LC                    0x00200000
-+#define EMAC_IMASKT_RL                   0x00100000
-+#define EMAC_IMASK_UN                    0x00080000
-+
-+#define EMAC_RCNTRL_MAX_FL_SHIFT         16
-+#define EMAC_RCNTRL_LOOP                 0x00000001
-+#define EMAC_RCNTRL_DRT                  0x00000002
-+#define EMAC_RCNTRL_MII_MODE             0x00000004
-+#define EMAC_RCNTRL_PROM                 0x00000008
-+#define EMAC_RCNTRL_BC_REJ               0x00000010
-+#define EMAC_RCNTRL_FCE                  0x00000020
-+#define EMAC_RCNTRL_RGMII                0x00000040
-+#define EMAC_RCNTRL_SGMII                0x00000080
-+#define EMAC_RCNTRL_RMII                 0x00000100
-+#define EMAC_RCNTRL_RMII_10T             0x00000200
-+#define EMAC_RCNTRL_CRC_FWD		 0x00004000
-+
-+#define EMAC_TCNTRL_GTS                  0x00000001
-+#define EMAC_TCNTRL_HBC                  0x00000002
-+#define EMAC_TCNTRL_FDEN                 0x00000004
-+#define EMAC_TCNTRL_TFC_PAUSE            0x00000008
-+#define EMAC_TCNTRL_RFC_PAUSE            0x00000010
-+
-+#define EMAC_ECNTRL_RESET                0x00000001      /* reset the EMAC */
-+#define EMAC_ECNTRL_ETHER_EN             0x00000002      /* enable the EMAC */
-+#define EMAC_ECNTRL_MAGIC_ENA		 0x00000004
-+#define EMAC_ECNTRL_SLEEP		 0x00000008
-+#define EMAC_ECNTRL_SPEED                0x00000020
-+#define EMAC_ECNTRL_DBSWAP               0x00000100
-+
-+#define EMAC_X_WMRK_STRFWD               0x00000100
-+
-+#define EMAC_X_DES_ACTIVE_TDAR           0x01000000
-+#define EMAC_R_DES_ACTIVE_RDAR           0x01000000
-+
-+#define EMAC_RX_SECTION_EMPTY_V		0x00010006
-+/*
-+ * The possible operating speeds of the MAC, currently supporting 10, 100 and
-+ * 1000Mb modes.
-+ */
-+enum mac_speed {SPEED_10M, SPEED_100M, SPEED_1000M, SPEED_1000M_PCS};
-+
-+/* MII-related definitios */
-+#define EMAC_MII_DATA_ST         0x40000000      /* Start of frame delimiter */
-+#define EMAC_MII_DATA_OP_RD      0x20000000      /* Perform a read operation */
-+#define EMAC_MII_DATA_OP_CL45_RD 0x30000000      /* Perform a read operation */
-+#define EMAC_MII_DATA_OP_WR      0x10000000      /* Perform a write operation */
-+#define EMAC_MII_DATA_OP_CL45_WR 0x10000000      /* Perform a write operation */
-+#define EMAC_MII_DATA_PA_MSK     0x0f800000      /* PHY Address field mask */
-+#define EMAC_MII_DATA_RA_MSK     0x007c0000      /* PHY Register field mask */
-+#define EMAC_MII_DATA_TA         0x00020000      /* Turnaround */
-+#define EMAC_MII_DATA_DATAMSK    0x0000ffff      /* PHY data field */
-+
-+#define EMAC_MII_DATA_RA_SHIFT   18      /* MII Register address bits */
-+#define EMAC_MII_DATA_RA_MASK	 0x1F      /* MII Register address mask */
-+#define EMAC_MII_DATA_PA_SHIFT   23      /* MII PHY address bits */
-+#define EMAC_MII_DATA_PA_MASK    0x1F      /* MII PHY address mask */
-+
-+#define EMAC_MII_DATA_RA(v) (((v) & EMAC_MII_DATA_RA_MASK) << \
-+				EMAC_MII_DATA_RA_SHIFT)
-+#define EMAC_MII_DATA_PA(v) (((v) & EMAC_MII_DATA_RA_MASK) << \
-+				EMAC_MII_DATA_PA_SHIFT)
-+#define EMAC_MII_DATA(v)    ((v) & 0xffff)
-+
-+#define EMAC_MII_SPEED_SHIFT	1
-+#define EMAC_HOLDTIME_SHIFT	8
-+#define EMAC_HOLDTIME_MASK	0x7
-+#define EMAC_HOLDTIME(v)	(((v) & EMAC_HOLDTIME_MASK) << \
-+					EMAC_HOLDTIME_SHIFT)
-+
-+/*
-+ * The Address organisation for the MAC device.  All addresses are split into
-+ * two 32-bit register fields.  The first one (bottom) is the lower 32-bits of
-+ * the address and the other field are the high order bits - this may be 16-bits
-+ * in the case of MAC addresses, or 32-bits for the hash address.
-+ * In terms of memory storage, the first item (bottom) is assumed to be at a
-+ * lower address location than 'top'. i.e. top should be at address location of
-+ * 'bottom' + 4 bytes.
-+ */
-+struct pfe_mac_addr {
-+	u32 bottom;     /* Lower 32-bits of address. */
-+	u32 top;        /* Upper 32-bits of address. */
-+};
-+
-+/*
-+ * The following is the organisation of the address filters section of the MAC
-+ * registers.  The Cadence MAC contains four possible specific address match
-+ * addresses, if an incoming frame corresponds to any one of these four
-+ * addresses then the frame will be copied to memory.
-+ * It is not necessary for all four of the address match registers to be
-+ * programmed, this is application dependent.
-+ */
-+struct spec_addr {
-+	struct pfe_mac_addr one;        /* Specific address register 1. */
-+	struct pfe_mac_addr two;        /* Specific address register 2. */
-+	struct pfe_mac_addr three;      /* Specific address register 3. */
-+	struct pfe_mac_addr four;       /* Specific address register 4. */
-+};
-+
-+struct gemac_cfg {
-+	u32 mode;
-+	u32 speed;
-+	u32 duplex;
-+};
-+
-+/* EMAC Hash size */
-+#define EMAC_HASH_REG_BITS       64
-+
-+#define EMAC_SPEC_ADDR_MAX	4
-+
-+#endif /* _EMAC_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/gpi.h
-@@ -0,0 +1,86 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _GPI_H_
-+#define _GPI_H_
-+
-+#define GPI_VERSION	0x00
-+#define GPI_CTRL	0x04
-+#define GPI_RX_CONFIG	0x08
-+#define GPI_HDR_SIZE	0x0c
-+#define GPI_BUF_SIZE	0x10
-+#define GPI_LMEM_ALLOC_ADDR	0x14
-+#define GPI_LMEM_FREE_ADDR	0x18
-+#define GPI_DDR_ALLOC_ADDR	0x1c
-+#define GPI_DDR_FREE_ADDR	0x20
-+#define GPI_CLASS_ADDR	0x24
-+#define GPI_DRX_FIFO	0x28
-+#define GPI_TRX_FIFO	0x2c
-+#define GPI_INQ_PKTPTR	0x30
-+#define GPI_DDR_DATA_OFFSET	0x34
-+#define GPI_LMEM_DATA_OFFSET	0x38
-+#define GPI_TMLF_TX	0x4c
-+#define GPI_DTX_ASEQ	0x50
-+#define GPI_FIFO_STATUS	0x54
-+#define GPI_FIFO_DEBUG	0x58
-+#define GPI_TX_PAUSE_TIME	0x5c
-+#define GPI_LMEM_SEC_BUF_DATA_OFFSET	0x60
-+#define GPI_DDR_SEC_BUF_DATA_OFFSET	0x64
-+#define GPI_TOE_CHKSUM_EN	0x68
-+#define GPI_OVERRUN_DROPCNT	0x6c
-+#define GPI_CSR_MTIP_PAUSE_REG		0x74
-+#define GPI_CSR_MTIP_PAUSE_QUANTUM	0x78
-+#define GPI_CSR_RX_CNT			0x7c
-+#define GPI_CSR_TX_CNT			0x80
-+#define GPI_CSR_DEBUG1			0x84
-+#define GPI_CSR_DEBUG2			0x88
-+
-+struct gpi_cfg {
-+	u32 lmem_rtry_cnt;
-+	u32 tmlf_txthres;
-+	u32 aseq_len;
-+	u32 mtip_pause_reg;
-+};
-+
-+/* GPI commons defines */
-+#define GPI_LMEM_BUF_EN	0x1
-+#define GPI_DDR_BUF_EN	0x1
-+
-+/* EGPI 1 defines */
-+#define EGPI1_LMEM_RTRY_CNT	0x40
-+#define EGPI1_TMLF_TXTHRES	0xBC
-+#define EGPI1_ASEQ_LEN	0x50
-+
-+/* EGPI 2 defines */
-+#define EGPI2_LMEM_RTRY_CNT	0x40
-+#define EGPI2_TMLF_TXTHRES	0xBC
-+#define EGPI2_ASEQ_LEN	0x40
-+
-+/* EGPI 3 defines */
-+#define EGPI3_LMEM_RTRY_CNT	0x40
-+#define EGPI3_TMLF_TXTHRES	0xBC
-+#define EGPI3_ASEQ_LEN	0x40
-+
-+/* HGPI defines */
-+#define HGPI_LMEM_RTRY_CNT	0x40
-+#define HGPI_TMLF_TXTHRES	0xBC
-+#define HGPI_ASEQ_LEN	0x40
-+
-+#define EGPI_PAUSE_TIME		0x000007D0
-+#define EGPI_PAUSE_ENABLE	0x40000000
-+#endif /* _GPI_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/hif.h
-@@ -0,0 +1,100 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _HIF_H_
-+#define _HIF_H_
-+
-+/* @file hif.h.
-+ * hif - PFE hif block control and status register.
-+ * Mapped on CBUS and accessible from all PE's and ARM.
-+ */
-+#define HIF_VERSION	(HIF_BASE_ADDR + 0x00)
-+#define HIF_TX_CTRL	(HIF_BASE_ADDR + 0x04)
-+#define HIF_TX_CURR_BD_ADDR	(HIF_BASE_ADDR + 0x08)
-+#define HIF_TX_ALLOC	(HIF_BASE_ADDR + 0x0c)
-+#define HIF_TX_BDP_ADDR	(HIF_BASE_ADDR + 0x10)
-+#define HIF_TX_STATUS	(HIF_BASE_ADDR + 0x14)
-+#define HIF_RX_CTRL	(HIF_BASE_ADDR + 0x20)
-+#define HIF_RX_BDP_ADDR	(HIF_BASE_ADDR + 0x24)
-+#define HIF_RX_STATUS	(HIF_BASE_ADDR + 0x30)
-+#define HIF_INT_SRC	(HIF_BASE_ADDR + 0x34)
-+#define HIF_INT_ENABLE	(HIF_BASE_ADDR + 0x38)
-+#define HIF_POLL_CTRL	(HIF_BASE_ADDR + 0x3c)
-+#define HIF_RX_CURR_BD_ADDR	(HIF_BASE_ADDR + 0x40)
-+#define HIF_RX_ALLOC	(HIF_BASE_ADDR + 0x44)
-+#define HIF_TX_DMA_STATUS	(HIF_BASE_ADDR + 0x48)
-+#define HIF_RX_DMA_STATUS	(HIF_BASE_ADDR + 0x4c)
-+#define HIF_INT_COAL	(HIF_BASE_ADDR + 0x50)
-+
-+/* HIF_INT_SRC/ HIF_INT_ENABLE control bits */
-+#define HIF_INT		BIT(0)
-+#define HIF_RXBD_INT	BIT(1)
-+#define HIF_RXPKT_INT	BIT(2)
-+#define HIF_TXBD_INT	BIT(3)
-+#define HIF_TXPKT_INT	BIT(4)
-+
-+/* HIF_TX_CTRL bits */
-+#define HIF_CTRL_DMA_EN			BIT(0)
-+#define HIF_CTRL_BDP_POLL_CTRL_EN	BIT(1)
-+#define HIF_CTRL_BDP_CH_START_WSTB	BIT(2)
-+
-+/* HIF_RX_STATUS bits */
-+#define BDP_CSR_RX_DMA_ACTV     BIT(16)
-+
-+/* HIF_INT_ENABLE bits */
-+#define HIF_INT_EN		BIT(0)
-+#define HIF_RXBD_INT_EN		BIT(1)
-+#define HIF_RXPKT_INT_EN	BIT(2)
-+#define HIF_TXBD_INT_EN		BIT(3)
-+#define HIF_TXPKT_INT_EN	BIT(4)
-+
-+/* HIF_POLL_CTRL bits*/
-+#define HIF_RX_POLL_CTRL_CYCLE	0x0400
-+#define HIF_TX_POLL_CTRL_CYCLE	0x0400
-+
-+/* HIF_INT_COAL bits*/
-+#define HIF_INT_COAL_ENABLE	BIT(31)
-+
-+/* Buffer descriptor control bits */
-+#define BD_CTRL_BUFLEN_MASK	0x3fff
-+#define BD_BUF_LEN(x)	((x) & BD_CTRL_BUFLEN_MASK)
-+#define BD_CTRL_CBD_INT_EN	BIT(16)
-+#define BD_CTRL_PKT_INT_EN	BIT(17)
-+#define BD_CTRL_LIFM		BIT(18)
-+#define BD_CTRL_LAST_BD		BIT(19)
-+#define BD_CTRL_DIR		BIT(20)
-+#define BD_CTRL_LMEM_CPY	BIT(21) /* Valid only for HIF_NOCPY */
-+#define BD_CTRL_PKT_XFER	BIT(24)
-+#define BD_CTRL_DESC_EN		BIT(31)
-+#define BD_CTRL_PARSE_DISABLE	BIT(25)
-+#define BD_CTRL_BRFETCH_DISABLE	BIT(26)
-+#define BD_CTRL_RTFETCH_DISABLE	BIT(27)
-+
-+/* Buffer descriptor status bits*/
-+#define BD_STATUS_CONN_ID(x)	((x) & 0xffff)
-+#define BD_STATUS_DIR_PROC_ID	BIT(16)
-+#define BD_STATUS_CONN_ID_EN	BIT(17)
-+#define BD_STATUS_PE2PROC_ID(x)	(((x) & 7) << 18)
-+#define BD_STATUS_LE_DATA	BIT(21)
-+#define BD_STATUS_CHKSUM_EN	BIT(22)
-+
-+/* HIF Buffer descriptor status bits */
-+#define DIR_PROC_ID	BIT(16)
-+#define PROC_ID(id)	((id) << 18)
-+
-+#endif /* _HIF_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/hif_nocpy.h
-@@ -0,0 +1,50 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _HIF_NOCPY_H_
-+#define _HIF_NOCPY_H_
-+
-+#define HIF_NOCPY_VERSION	(HIF_NOCPY_BASE_ADDR + 0x00)
-+#define HIF_NOCPY_TX_CTRL	(HIF_NOCPY_BASE_ADDR + 0x04)
-+#define HIF_NOCPY_TX_CURR_BD_ADDR	(HIF_NOCPY_BASE_ADDR + 0x08)
-+#define HIF_NOCPY_TX_ALLOC	(HIF_NOCPY_BASE_ADDR + 0x0c)
-+#define HIF_NOCPY_TX_BDP_ADDR	(HIF_NOCPY_BASE_ADDR + 0x10)
-+#define HIF_NOCPY_TX_STATUS	(HIF_NOCPY_BASE_ADDR + 0x14)
-+#define HIF_NOCPY_RX_CTRL	(HIF_NOCPY_BASE_ADDR + 0x20)
-+#define HIF_NOCPY_RX_BDP_ADDR	(HIF_NOCPY_BASE_ADDR + 0x24)
-+#define HIF_NOCPY_RX_STATUS	(HIF_NOCPY_BASE_ADDR + 0x30)
-+#define HIF_NOCPY_INT_SRC	(HIF_NOCPY_BASE_ADDR + 0x34)
-+#define HIF_NOCPY_INT_ENABLE	(HIF_NOCPY_BASE_ADDR + 0x38)
-+#define HIF_NOCPY_POLL_CTRL	(HIF_NOCPY_BASE_ADDR + 0x3c)
-+#define HIF_NOCPY_RX_CURR_BD_ADDR	(HIF_NOCPY_BASE_ADDR + 0x40)
-+#define HIF_NOCPY_RX_ALLOC	(HIF_NOCPY_BASE_ADDR + 0x44)
-+#define HIF_NOCPY_TX_DMA_STATUS	(HIF_NOCPY_BASE_ADDR + 0x48)
-+#define HIF_NOCPY_RX_DMA_STATUS	(HIF_NOCPY_BASE_ADDR + 0x4c)
-+#define HIF_NOCPY_RX_INQ0_PKTPTR	(HIF_NOCPY_BASE_ADDR + 0x50)
-+#define HIF_NOCPY_RX_INQ1_PKTPTR	(HIF_NOCPY_BASE_ADDR + 0x54)
-+#define HIF_NOCPY_TX_PORT_NO	(HIF_NOCPY_BASE_ADDR + 0x60)
-+#define HIF_NOCPY_LMEM_ALLOC_ADDR	(HIF_NOCPY_BASE_ADDR + 0x64)
-+#define HIF_NOCPY_CLASS_ADDR	(HIF_NOCPY_BASE_ADDR + 0x68)
-+#define HIF_NOCPY_TMU_PORT0_ADDR	(HIF_NOCPY_BASE_ADDR + 0x70)
-+#define HIF_NOCPY_TMU_PORT1_ADDR	(HIF_NOCPY_BASE_ADDR + 0x74)
-+#define HIF_NOCPY_TMU_PORT2_ADDR	(HIF_NOCPY_BASE_ADDR + 0x7c)
-+#define HIF_NOCPY_TMU_PORT3_ADDR	(HIF_NOCPY_BASE_ADDR + 0x80)
-+#define HIF_NOCPY_TMU_PORT4_ADDR	(HIF_NOCPY_BASE_ADDR + 0x84)
-+#define HIF_NOCPY_INT_COAL	(HIF_NOCPY_BASE_ADDR + 0x90)
-+
-+#endif /* _HIF_NOCPY_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h
-@@ -0,0 +1,168 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _TMU_CSR_H_
-+#define _TMU_CSR_H_
-+
-+#define TMU_VERSION	(TMU_CSR_BASE_ADDR + 0x000)
-+#define TMU_INQ_WATERMARK	(TMU_CSR_BASE_ADDR + 0x004)
-+#define TMU_PHY_INQ_PKTPTR	(TMU_CSR_BASE_ADDR + 0x008)
-+#define TMU_PHY_INQ_PKTINFO	(TMU_CSR_BASE_ADDR + 0x00c)
-+#define TMU_PHY_INQ_FIFO_CNT	(TMU_CSR_BASE_ADDR + 0x010)
-+#define TMU_SYS_GENERIC_CONTROL	(TMU_CSR_BASE_ADDR + 0x014)
-+#define TMU_SYS_GENERIC_STATUS	(TMU_CSR_BASE_ADDR + 0x018)
-+#define TMU_SYS_GEN_CON0	(TMU_CSR_BASE_ADDR + 0x01c)
-+#define TMU_SYS_GEN_CON1	(TMU_CSR_BASE_ADDR + 0x020)
-+#define TMU_SYS_GEN_CON2	(TMU_CSR_BASE_ADDR + 0x024)
-+#define TMU_SYS_GEN_CON3	(TMU_CSR_BASE_ADDR + 0x028)
-+#define TMU_SYS_GEN_CON4	(TMU_CSR_BASE_ADDR + 0x02c)
-+#define TMU_TEQ_DISABLE_DROPCHK	(TMU_CSR_BASE_ADDR + 0x030)
-+#define TMU_TEQ_CTRL	(TMU_CSR_BASE_ADDR + 0x034)
-+#define TMU_TEQ_QCFG	(TMU_CSR_BASE_ADDR + 0x038)
-+#define TMU_TEQ_DROP_STAT	(TMU_CSR_BASE_ADDR + 0x03c)
-+#define TMU_TEQ_QAVG	(TMU_CSR_BASE_ADDR + 0x040)
-+#define TMU_TEQ_WREG_PROB	(TMU_CSR_BASE_ADDR + 0x044)
-+#define TMU_TEQ_TRANS_STAT	(TMU_CSR_BASE_ADDR + 0x048)
-+#define TMU_TEQ_HW_PROB_CFG0	(TMU_CSR_BASE_ADDR + 0x04c)
-+#define TMU_TEQ_HW_PROB_CFG1	(TMU_CSR_BASE_ADDR + 0x050)
-+#define TMU_TEQ_HW_PROB_CFG2	(TMU_CSR_BASE_ADDR + 0x054)
-+#define TMU_TEQ_HW_PROB_CFG3	(TMU_CSR_BASE_ADDR + 0x058)
-+#define TMU_TEQ_HW_PROB_CFG4	(TMU_CSR_BASE_ADDR + 0x05c)
-+#define TMU_TEQ_HW_PROB_CFG5	(TMU_CSR_BASE_ADDR + 0x060)
-+#define TMU_TEQ_HW_PROB_CFG6	(TMU_CSR_BASE_ADDR + 0x064)
-+#define TMU_TEQ_HW_PROB_CFG7	(TMU_CSR_BASE_ADDR + 0x068)
-+#define TMU_TEQ_HW_PROB_CFG8	(TMU_CSR_BASE_ADDR + 0x06c)
-+#define TMU_TEQ_HW_PROB_CFG9	(TMU_CSR_BASE_ADDR + 0x070)
-+#define TMU_TEQ_HW_PROB_CFG10	(TMU_CSR_BASE_ADDR + 0x074)
-+#define TMU_TEQ_HW_PROB_CFG11	(TMU_CSR_BASE_ADDR + 0x078)
-+#define TMU_TEQ_HW_PROB_CFG12	(TMU_CSR_BASE_ADDR + 0x07c)
-+#define TMU_TEQ_HW_PROB_CFG13	(TMU_CSR_BASE_ADDR + 0x080)
-+#define TMU_TEQ_HW_PROB_CFG14	(TMU_CSR_BASE_ADDR + 0x084)
-+#define TMU_TEQ_HW_PROB_CFG15	(TMU_CSR_BASE_ADDR + 0x088)
-+#define TMU_TEQ_HW_PROB_CFG16	(TMU_CSR_BASE_ADDR + 0x08c)
-+#define TMU_TEQ_HW_PROB_CFG17	(TMU_CSR_BASE_ADDR + 0x090)
-+#define TMU_TEQ_HW_PROB_CFG18	(TMU_CSR_BASE_ADDR + 0x094)
-+#define TMU_TEQ_HW_PROB_CFG19	(TMU_CSR_BASE_ADDR + 0x098)
-+#define TMU_TEQ_HW_PROB_CFG20	(TMU_CSR_BASE_ADDR + 0x09c)
-+#define TMU_TEQ_HW_PROB_CFG21	(TMU_CSR_BASE_ADDR + 0x0a0)
-+#define TMU_TEQ_HW_PROB_CFG22	(TMU_CSR_BASE_ADDR + 0x0a4)
-+#define TMU_TEQ_HW_PROB_CFG23	(TMU_CSR_BASE_ADDR + 0x0a8)
-+#define TMU_TEQ_HW_PROB_CFG24	(TMU_CSR_BASE_ADDR + 0x0ac)
-+#define TMU_TEQ_HW_PROB_CFG25	(TMU_CSR_BASE_ADDR + 0x0b0)
-+#define TMU_TDQ_IIFG_CFG	(TMU_CSR_BASE_ADDR + 0x0b4)
-+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ.
-+ * This is a global Enable for all schedulers in PHY0
-+ */
-+#define TMU_TDQ0_SCH_CTRL	(TMU_CSR_BASE_ADDR + 0x0b8)
-+
-+#define TMU_LLM_CTRL	(TMU_CSR_BASE_ADDR + 0x0bc)
-+#define TMU_LLM_BASE_ADDR	(TMU_CSR_BASE_ADDR + 0x0c0)
-+#define TMU_LLM_QUE_LEN	(TMU_CSR_BASE_ADDR + 0x0c4)
-+#define TMU_LLM_QUE_HEADPTR	(TMU_CSR_BASE_ADDR + 0x0c8)
-+#define TMU_LLM_QUE_TAILPTR	(TMU_CSR_BASE_ADDR + 0x0cc)
-+#define TMU_LLM_QUE_DROPCNT	(TMU_CSR_BASE_ADDR + 0x0d0)
-+#define TMU_INT_EN	(TMU_CSR_BASE_ADDR + 0x0d4)
-+#define TMU_INT_SRC	(TMU_CSR_BASE_ADDR + 0x0d8)
-+#define TMU_INQ_STAT	(TMU_CSR_BASE_ADDR + 0x0dc)
-+#define TMU_CTRL	(TMU_CSR_BASE_ADDR + 0x0e0)
-+
-+/* [31] Mem Access Command. 0 = Internal Memory Read, 1 = Internal memory
-+ * Write [27:24] Byte Enables of the Internal memory access [23:0] Address of
-+ * the internal memory. This address is used to access both the PM and DM of
-+ * all the PE's
-+ */
-+#define TMU_MEM_ACCESS_ADDR	(TMU_CSR_BASE_ADDR + 0x0e4)
-+
-+/* Internal Memory Access Write Data */
-+#define TMU_MEM_ACCESS_WDATA	(TMU_CSR_BASE_ADDR + 0x0e8)
-+/* Internal Memory Access Read Data. The commands are blocked
-+ * at the mem_access only
-+ */
-+#define TMU_MEM_ACCESS_RDATA	(TMU_CSR_BASE_ADDR + 0x0ec)
-+
-+/* [31:0] PHY0 in queue address (must be initialized with one of the
-+ * xxx_INQ_PKTPTR cbus addresses)
-+ */
-+#define TMU_PHY0_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x0f0)
-+/* [31:0] PHY1 in queue address (must be initialized with one of the
-+ * xxx_INQ_PKTPTR cbus addresses)
-+ */
-+#define TMU_PHY1_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x0f4)
-+/* [31:0] PHY2 in queue address (must be initialized with one of the
-+ * xxx_INQ_PKTPTR cbus addresses)
-+ */
-+#define TMU_PHY2_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x0f8)
-+/* [31:0] PHY3 in queue address (must be initialized with one of the
-+ * xxx_INQ_PKTPTR cbus addresses)
-+ */
-+#define TMU_PHY3_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x0fc)
-+#define TMU_BMU_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x100)
-+#define TMU_TX_CTRL	(TMU_CSR_BASE_ADDR + 0x104)
-+
-+#define TMU_BUS_ACCESS_WDATA	(TMU_CSR_BASE_ADDR + 0x108)
-+#define TMU_BUS_ACCESS	(TMU_CSR_BASE_ADDR + 0x10c)
-+#define TMU_BUS_ACCESS_RDATA	(TMU_CSR_BASE_ADDR + 0x110)
-+
-+#define TMU_PE_SYS_CLK_RATIO	(TMU_CSR_BASE_ADDR + 0x114)
-+#define TMU_PE_STATUS	(TMU_CSR_BASE_ADDR + 0x118)
-+#define TMU_TEQ_MAX_THRESHOLD	(TMU_CSR_BASE_ADDR + 0x11c)
-+/* [31:0] PHY4 in queue address (must be initialized with one of the
-+ * xxx_INQ_PKTPTR cbus addresses)
-+ */
-+#define TMU_PHY4_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x134)
-+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ.
-+ * This is a global Enable for all schedulers in PHY1
-+ */
-+#define TMU_TDQ1_SCH_CTRL	(TMU_CSR_BASE_ADDR + 0x138)
-+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ.
-+ * This is a global Enable for all schedulers in PHY2
-+ */
-+#define TMU_TDQ2_SCH_CTRL	(TMU_CSR_BASE_ADDR + 0x13c)
-+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ.
-+ * This is a global Enable for all schedulers in PHY3
-+ */
-+#define TMU_TDQ3_SCH_CTRL	(TMU_CSR_BASE_ADDR + 0x140)
-+#define TMU_BMU_BUF_SIZE	(TMU_CSR_BASE_ADDR + 0x144)
-+/* [31:0] PHY5 in queue address (must be initialized with one of the
-+ * xxx_INQ_PKTPTR cbus addresses)
-+ */
-+#define TMU_PHY5_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x148)
-+
-+#define SW_RESET		BIT(0)	/* Global software reset */
-+#define INQ_RESET		BIT(2)
-+#define TEQ_RESET		BIT(3)
-+#define TDQ_RESET		BIT(4)
-+#define PE_RESET		BIT(5)
-+#define MEM_INIT		BIT(6)
-+#define MEM_INIT_DONE		BIT(7)
-+#define LLM_INIT		BIT(8)
-+#define LLM_INIT_DONE		BIT(9)
-+#define ECC_MEM_INIT_DONE	BIT(10)
-+
-+struct tmu_cfg {
-+	u32 pe_sys_clk_ratio;
-+	unsigned long llm_base_addr;
-+	u32 llm_queue_len;
-+};
-+
-+/* Not HW related for pfe_ctrl / pfe common defines */
-+#define DEFAULT_MAX_QDEPTH	80
-+#define DEFAULT_Q0_QDEPTH	511 /*We keep one large queue for host tx qos */
-+#define DEFAULT_TMU3_QDEPTH	127
-+
-+#endif /* _TMU_CSR_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/util_csr.h
-@@ -0,0 +1,61 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _UTIL_CSR_H_
-+#define _UTIL_CSR_H_
-+
-+#define UTIL_VERSION	(UTIL_CSR_BASE_ADDR + 0x000)
-+#define UTIL_TX_CTRL	(UTIL_CSR_BASE_ADDR + 0x004)
-+#define UTIL_INQ_PKTPTR	(UTIL_CSR_BASE_ADDR + 0x010)
-+
-+#define UTIL_HDR_SIZE	(UTIL_CSR_BASE_ADDR + 0x014)
-+
-+#define UTIL_PE0_QB_DM_ADDR0	(UTIL_CSR_BASE_ADDR + 0x020)
-+#define UTIL_PE0_QB_DM_ADDR1	(UTIL_CSR_BASE_ADDR + 0x024)
-+#define UTIL_PE0_RO_DM_ADDR0	(UTIL_CSR_BASE_ADDR + 0x060)
-+#define UTIL_PE0_RO_DM_ADDR1	(UTIL_CSR_BASE_ADDR + 0x064)
-+
-+#define UTIL_MEM_ACCESS_ADDR	(UTIL_CSR_BASE_ADDR + 0x100)
-+#define UTIL_MEM_ACCESS_WDATA	(UTIL_CSR_BASE_ADDR + 0x104)
-+#define UTIL_MEM_ACCESS_RDATA	(UTIL_CSR_BASE_ADDR + 0x108)
-+
-+#define UTIL_TM_INQ_ADDR	(UTIL_CSR_BASE_ADDR + 0x114)
-+#define UTIL_PE_STATUS	(UTIL_CSR_BASE_ADDR + 0x118)
-+
-+#define UTIL_PE_SYS_CLK_RATIO	(UTIL_CSR_BASE_ADDR + 0x200)
-+#define UTIL_AFULL_THRES	(UTIL_CSR_BASE_ADDR + 0x204)
-+#define UTIL_GAP_BETWEEN_READS	(UTIL_CSR_BASE_ADDR + 0x208)
-+#define UTIL_MAX_BUF_CNT	(UTIL_CSR_BASE_ADDR + 0x20c)
-+#define UTIL_TSQ_FIFO_THRES	(UTIL_CSR_BASE_ADDR + 0x210)
-+#define UTIL_TSQ_MAX_CNT	(UTIL_CSR_BASE_ADDR + 0x214)
-+#define UTIL_IRAM_DATA_0	(UTIL_CSR_BASE_ADDR + 0x218)
-+#define UTIL_IRAM_DATA_1	(UTIL_CSR_BASE_ADDR + 0x21c)
-+#define UTIL_IRAM_DATA_2	(UTIL_CSR_BASE_ADDR + 0x220)
-+#define UTIL_IRAM_DATA_3	(UTIL_CSR_BASE_ADDR + 0x224)
-+
-+#define UTIL_BUS_ACCESS_ADDR	(UTIL_CSR_BASE_ADDR + 0x228)
-+#define UTIL_BUS_ACCESS_WDATA	(UTIL_CSR_BASE_ADDR + 0x22c)
-+#define UTIL_BUS_ACCESS_RDATA	(UTIL_CSR_BASE_ADDR + 0x230)
-+
-+#define UTIL_INQ_AFULL_THRES	(UTIL_CSR_BASE_ADDR + 0x234)
-+
-+struct util_cfg {
-+	u32 pe_sys_clk_ratio;
-+};
-+
-+#endif /* _UTIL_CSR_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/include/pfe/pfe.h
-@@ -0,0 +1,372 @@
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _PFE_H_
-+#define _PFE_H_
-+
-+#include "cbus.h"
-+
-+#define CLASS_DMEM_BASE_ADDR(i)	(0x00000000 | ((i) << 20))
-+/*
-+ * Only valid for mem access register interface
-+ */
-+#define CLASS_IMEM_BASE_ADDR(i)	(0x00000000 | ((i) << 20))
-+#define CLASS_DMEM_SIZE	0x00002000
-+#define CLASS_IMEM_SIZE	0x00008000
-+
-+#define TMU_DMEM_BASE_ADDR(i)	(0x00000000 + ((i) << 20))
-+/*
-+ * Only valid for mem access register interface
-+ */
-+#define TMU_IMEM_BASE_ADDR(i)	(0x00000000 + ((i) << 20))
-+#define TMU_DMEM_SIZE	0x00000800
-+#define TMU_IMEM_SIZE	0x00002000
-+
-+#define UTIL_DMEM_BASE_ADDR	0x00000000
-+#define UTIL_DMEM_SIZE	0x00002000
-+
-+#define PE_LMEM_BASE_ADDR	0xc3010000
-+#define PE_LMEM_SIZE	0x8000
-+#define PE_LMEM_END	(PE_LMEM_BASE_ADDR + PE_LMEM_SIZE)
-+
-+#define DMEM_BASE_ADDR	0x00000000
-+#define DMEM_SIZE	0x2000	/* TMU has less... */
-+#define DMEM_END	(DMEM_BASE_ADDR + DMEM_SIZE)
-+
-+#define PMEM_BASE_ADDR	0x00010000
-+#define PMEM_SIZE	0x8000	/* TMU has less... */
-+#define PMEM_END	(PMEM_BASE_ADDR + PMEM_SIZE)
-+
-+/* These check memory ranges from PE point of view/memory map */
-+#define IS_DMEM(addr, len)				\
-+	({ typeof(addr) addr_ = (addr);			\
-+	((unsigned long)(addr_) >= DMEM_BASE_ADDR) &&	\
-+	(((unsigned long)(addr_) + (len)) <= DMEM_END); })
-+
-+#define IS_PMEM(addr, len)				\
-+	({ typeof(addr) addr_ = (addr);			\
-+	((unsigned long)(addr_) >= PMEM_BASE_ADDR) &&	\
-+	(((unsigned long)(addr_) + (len)) <= PMEM_END); })
-+
-+#define IS_PE_LMEM(addr, len)				\
-+	({ typeof(addr) addr_ = (addr);			\
-+	((unsigned long)(addr_) >=			\
-+	PE_LMEM_BASE_ADDR) &&				\
-+	(((unsigned long)(addr_) +			\
-+	(len)) <= PE_LMEM_END); })
-+
-+#define IS_PFE_LMEM(addr, len)				\
-+	({ typeof(addr) addr_ = (addr);			\
-+	((unsigned long)(addr_) >=			\
-+	CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR)) &&		\
-+	(((unsigned long)(addr_) + (len)) <=		\
-+	CBUS_VIRT_TO_PFE(LMEM_END)); })
-+
-+#define __IS_PHYS_DDR(addr, len)			\
-+	({ typeof(addr) addr_ = (addr);			\
-+	((unsigned long)(addr_) >=			\
-+	DDR_PHYS_BASE_ADDR) &&				\
-+	(((unsigned long)(addr_) + (len)) <=		\
-+	DDR_PHYS_END); })
-+
-+#define IS_PHYS_DDR(addr, len)	__IS_PHYS_DDR(DDR_PFE_TO_PHYS(addr), len)
-+
-+/*
-+ * If using a run-time virtual address for the cbus base address use this code
-+ */
-+extern void *cbus_base_addr;
-+extern void *ddr_base_addr;
-+extern unsigned long ddr_phys_base_addr;
-+extern unsigned int ddr_size;
-+
-+#define CBUS_BASE_ADDR	cbus_base_addr
-+#define DDR_PHYS_BASE_ADDR	ddr_phys_base_addr
-+#define DDR_BASE_ADDR	ddr_base_addr
-+#define DDR_SIZE	ddr_size
-+
-+#define DDR_PHYS_END	(DDR_PHYS_BASE_ADDR + DDR_SIZE)
-+
-+#define LS1012A_PFE_RESET_WA	/*
-+				 * PFE doesn't have global reset and re-init
-+				 * should takecare few things to make PFE
-+				 * functional after reset
-+				 */
-+#define PFE_CBUS_PHYS_BASE_ADDR	0xc0000000	/* CBUS physical base address
-+						 * as seen by PE's.
-+						 */
-+/* CBUS physical base address as seen by PE's. */
-+#define PFE_CBUS_PHYS_BASE_ADDR_FROM_PFE	0xc0000000
-+
-+#define DDR_PHYS_TO_PFE(p)	(((unsigned long int)(p)) & 0x7FFFFFFF)
-+#define DDR_PFE_TO_PHYS(p)	(((unsigned long int)(p)) | 0x80000000)
-+#define CBUS_PHYS_TO_PFE(p)	(((p) - PFE_CBUS_PHYS_BASE_ADDR) + \
-+				PFE_CBUS_PHYS_BASE_ADDR_FROM_PFE)
-+/* Translates to PFE address map */
-+
-+#define DDR_PHYS_TO_VIRT(p)	(((p) - DDR_PHYS_BASE_ADDR) + DDR_BASE_ADDR)
-+#define DDR_VIRT_TO_PHYS(v)	(((v) - DDR_BASE_ADDR) + DDR_PHYS_BASE_ADDR)
-+#define DDR_VIRT_TO_PFE(p)	(DDR_PHYS_TO_PFE(DDR_VIRT_TO_PHYS(p)))
-+
-+#define CBUS_VIRT_TO_PFE(v)	(((v) - CBUS_BASE_ADDR) + \
-+				PFE_CBUS_PHYS_BASE_ADDR)
-+#define CBUS_PFE_TO_VIRT(p)	(((unsigned long int)(p) - \
-+				PFE_CBUS_PHYS_BASE_ADDR) + CBUS_BASE_ADDR)
-+
-+/* The below part of the code is used in QOS control driver from host */
-+#define TMU_APB_BASE_ADDR       0xc1000000      /* TMU base address seen by
-+						 * pe's
-+						 */
-+
-+enum {
-+	CLASS0_ID = 0,
-+	CLASS1_ID,
-+	CLASS2_ID,
-+	CLASS3_ID,
-+	CLASS4_ID,
-+	CLASS5_ID,
-+	TMU0_ID,
-+	TMU1_ID,
-+	TMU2_ID,
-+	TMU3_ID,
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	UTIL_ID,
-+#endif
-+	MAX_PE
-+};
-+
-+#define CLASS_MASK	(BIT(CLASS0_ID) | BIT(CLASS1_ID) |\
-+			BIT(CLASS2_ID) | BIT(CLASS3_ID) |\
-+			BIT(CLASS4_ID) | BIT(CLASS5_ID))
-+#define CLASS_MAX_ID	CLASS5_ID
-+
-+#define TMU_MASK	(BIT(TMU0_ID) | BIT(TMU1_ID) |\
-+			BIT(TMU3_ID))
-+
-+#define TMU_MAX_ID	TMU3_ID
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+#define UTIL_MASK	BIT(UTIL_ID)
-+#endif
-+
-+struct pe_status {
-+	u32	cpu_state;
-+	u32	activity_counter;
-+	u32	rx;
-+	union {
-+	u32	tx;
-+	u32	tmu_qstatus;
-+	};
-+	u32	drop;
-+#if defined(CFG_PE_DEBUG)
-+	u32	debug_indicator;
-+	u32	debug[16];
-+#endif
-+} __aligned(16);
-+
-+struct pe_sync_mailbox {
-+	u32 stop;
-+	u32 stopped;
-+};
-+
-+/* Drop counter definitions */
-+
-+#define	CLASS_NUM_DROP_COUNTERS	13
-+#define	UTIL_NUM_DROP_COUNTERS	8
-+
-+/* PE information.
-+ * Structure containing PE's specific information. It is used to create
-+ * generic C functions common to all PE's.
-+ * Before using the library functions this structure needs to be initialized
-+ * with the different registers virtual addresses
-+ * (according to the ARM MMU mmaping). The default initialization supports a
-+ * virtual == physical mapping.
-+ */
-+struct pe_info {
-+	u32 dmem_base_addr;	/* PE's dmem base address */
-+	u32 pmem_base_addr;	/* PE's pmem base address */
-+	u32 pmem_size;	/* PE's pmem size */
-+
-+	void *mem_access_wdata;	/* PE's _MEM_ACCESS_WDATA register
-+				 * address
-+				 */
-+	void *mem_access_addr;	/* PE's _MEM_ACCESS_ADDR register
-+				 * address
-+				 */
-+	void *mem_access_rdata;	/* PE's _MEM_ACCESS_RDATA register
-+				 * address
-+				 */
-+};
-+
-+void pe_lmem_read(u32 *dst, u32 len, u32 offset);
-+void pe_lmem_write(u32 *src, u32 len, u32 offset);
-+
-+void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len);
-+void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len);
-+
-+u32 pe_pmem_read(int id, u32 addr, u8 size);
-+
-+void pe_dmem_write(int id, u32 val, u32 addr, u8 size);
-+u32 pe_dmem_read(int id, u32 addr, u8 size);
-+void class_pe_lmem_memcpy_to32(u32 dst, const void *src, unsigned int len);
-+void class_pe_lmem_memset(u32 dst, int val, unsigned int len);
-+void class_bus_write(u32 val, u32 addr, u8 size);
-+u32 class_bus_read(u32 addr, u8 size);
-+
-+#define class_bus_readl(addr)	class_bus_read(addr, 4)
-+#define class_bus_readw(addr)	class_bus_read(addr, 2)
-+#define class_bus_readb(addr)	class_bus_read(addr, 1)
-+
-+#define class_bus_writel(val, addr)	class_bus_write(val, addr, 4)
-+#define class_bus_writew(val, addr)	class_bus_write(val, addr, 2)
-+#define class_bus_writeb(val, addr)	class_bus_write(val, addr, 1)
-+
-+#define pe_dmem_readl(id, addr)	pe_dmem_read(id, addr, 4)
-+#define pe_dmem_readw(id, addr)	pe_dmem_read(id, addr, 2)
-+#define pe_dmem_readb(id, addr)	pe_dmem_read(id, addr, 1)
-+
-+#define pe_dmem_writel(id, val, addr)	pe_dmem_write(id, val, addr, 4)
-+#define pe_dmem_writew(id, val, addr)	pe_dmem_write(id, val, addr, 2)
-+#define pe_dmem_writeb(id, val, addr)	pe_dmem_write(id, val, addr, 1)
-+
-+/*int pe_load_elf_section(int id, const void *data, elf32_shdr *shdr); */
-+int pe_load_elf_section(int id, const void *data, struct elf32_shdr *shdr,
-+			struct device *dev);
-+
-+void pfe_lib_init(void *cbus_base, void *ddr_base, unsigned long ddr_phys_base,
-+		  unsigned int ddr_size);
-+void bmu_init(void *base, struct BMU_CFG *cfg);
-+void bmu_reset(void *base);
-+void bmu_enable(void *base);
-+void bmu_disable(void *base);
-+void bmu_set_config(void *base, struct BMU_CFG *cfg);
-+
-+/*
-+ * An enumerated type for loopback values.  This can be one of three values, no
-+ * loopback -normal operation, local loopback with internal loopback module of
-+ * MAC or PHY loopback which is through the external PHY.
-+ */
-+#ifndef __MAC_LOOP_ENUM__
-+#define __MAC_LOOP_ENUM__
-+enum mac_loop {LB_NONE, LB_EXT, LB_LOCAL};
-+#endif
-+
-+void gemac_init(void *base, void *config);
-+void gemac_disable_rx_checksum_offload(void *base);
-+void gemac_enable_rx_checksum_offload(void *base);
-+void gemac_set_speed(void *base, enum mac_speed gem_speed);
-+void gemac_set_duplex(void *base, int duplex);
-+void gemac_set_mode(void *base, int mode);
-+void gemac_enable(void *base);
-+void gemac_tx_disable(void *base);
-+void gemac_tx_enable(void *base);
-+void gemac_disable(void *base);
-+void gemac_reset(void *base);
-+void gemac_set_address(void *base, struct spec_addr *addr);
-+struct spec_addr gemac_get_address(void *base);
-+void gemac_set_loop(void *base, enum mac_loop gem_loop);
-+void gemac_set_laddr1(void *base, struct pfe_mac_addr *address);
-+void gemac_set_laddr2(void *base, struct pfe_mac_addr *address);
-+void gemac_set_laddr3(void *base, struct pfe_mac_addr *address);
-+void gemac_set_laddr4(void *base, struct pfe_mac_addr *address);
-+void gemac_set_laddrN(void *base, struct pfe_mac_addr *address,
-+		      unsigned int entry_index);
-+void gemac_clear_laddr1(void *base);
-+void gemac_clear_laddr2(void *base);
-+void gemac_clear_laddr3(void *base);
-+void gemac_clear_laddr4(void *base);
-+void gemac_clear_laddrN(void *base, unsigned int entry_index);
-+struct pfe_mac_addr gemac_get_hash(void *base);
-+void gemac_set_hash(void *base, struct pfe_mac_addr *hash);
-+struct pfe_mac_addr gem_get_laddr1(void *base);
-+struct pfe_mac_addr gem_get_laddr2(void *base);
-+struct pfe_mac_addr gem_get_laddr3(void *base);
-+struct pfe_mac_addr gem_get_laddr4(void *base);
-+struct pfe_mac_addr gem_get_laddrN(void *base, unsigned int entry_index);
-+void gemac_set_config(void *base, struct gemac_cfg *cfg);
-+void gemac_allow_broadcast(void *base);
-+void gemac_no_broadcast(void *base);
-+void gemac_enable_1536_rx(void *base);
-+void gemac_disable_1536_rx(void *base);
-+void gemac_set_rx_max_fl(void *base, int mtu);
-+void gemac_enable_rx_jmb(void *base);
-+void gemac_disable_rx_jmb(void *base);
-+void gemac_enable_stacked_vlan(void *base);
-+void gemac_disable_stacked_vlan(void *base);
-+void gemac_enable_pause_rx(void *base);
-+void gemac_disable_pause_rx(void *base);
-+void gemac_enable_copy_all(void *base);
-+void gemac_disable_copy_all(void *base);
-+void gemac_set_bus_width(void *base, int width);
-+void gemac_set_wol(void *base, u32 wol_conf);
-+
-+void gpi_init(void *base, struct gpi_cfg *cfg);
-+void gpi_reset(void *base);
-+void gpi_enable(void *base);
-+void gpi_disable(void *base);
-+void gpi_set_config(void *base, struct gpi_cfg *cfg);
-+
-+void class_init(struct class_cfg *cfg);
-+void class_reset(void);
-+void class_enable(void);
-+void class_disable(void);
-+void class_set_config(struct class_cfg *cfg);
-+
-+void tmu_reset(void);
-+void tmu_init(struct tmu_cfg *cfg);
-+void tmu_enable(u32 pe_mask);
-+void tmu_disable(u32 pe_mask);
-+u32  tmu_qstatus(u32 if_id);
-+u32  tmu_pkts_processed(u32 if_id);
-+
-+void util_init(struct util_cfg *cfg);
-+void util_reset(void);
-+void util_enable(void);
-+void util_disable(void);
-+
-+void hif_init(void);
-+void hif_tx_enable(void);
-+void hif_tx_disable(void);
-+void hif_rx_enable(void);
-+void hif_rx_disable(void);
-+
-+/* Get Chip Revision level
-+ *
-+ */
-+static inline unsigned int CHIP_REVISION(void)
-+{
-+	/*For LS1012A return always 1 */
-+	return 1;
-+}
-+
-+/* Start HIF rx DMA
-+ *
-+ */
-+static inline void hif_rx_dma_start(void)
-+{
-+	writel(HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB, HIF_RX_CTRL);
-+}
-+
-+/* Start HIF tx DMA
-+ *
-+ */
-+static inline void hif_tx_dma_start(void)
-+{
-+	writel(HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB, HIF_TX_CTRL);
-+}
-+
-+#endif /* _PFE_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_cdev.c
-@@ -0,0 +1,258 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright 2018 NXP
-+ */
-+
-+/* @pfe_cdev.c.
-+ *  Dummy device representing the PFE US in userspace.
-+ *  - used for interacting with the kernel layer for link status
-+ */
-+
-+#include <linux/eventfd.h>
-+#include <linux/irqreturn.h>
-+#include <linux/io.h>
-+#include <asm/irq.h>
-+
-+#include "pfe_cdev.h"
-+#include "pfe_mod.h"
-+
-+static int pfe_majno;
-+static struct class *pfe_char_class;
-+static struct device *pfe_char_dev;
-+struct eventfd_ctx *g_trigger;
-+
-+struct pfe_shared_info link_states[PFE_CDEV_ETH_COUNT];
-+
-+static int pfe_cdev_open(struct inode *inp, struct file *fp)
-+{
-+	pr_debug("PFE CDEV device opened.\n");
-+	return 0;
-+}
-+
-+static ssize_t pfe_cdev_read(struct file *fp, char *buf,
-+			     size_t len, loff_t *off)
-+{
-+	int ret = 0;
-+
-+	pr_info("PFE CDEV attempt copying (%lu) size of user.\n",
-+		sizeof(link_states));
-+
-+	pr_debug("Dump link_state on screen before copy_to_user\n");
-+	for (; ret < PFE_CDEV_ETH_COUNT; ret++) {
-+		pr_debug("%u  %u", link_states[ret].phy_id,
-+			 link_states[ret].state);
-+		pr_debug("\n");
-+	}
-+
-+	/* Copy to user the value in buffer sized len */
-+	ret = copy_to_user(buf, &link_states, sizeof(link_states));
-+	if (ret != 0) {
-+		pr_err("Failed to send (%d)bytes of (%lu) requested.\n",
-+		       ret, len);
-+		return -EFAULT;
-+	}
-+
-+	/* offset set back to 0 as there is contextual reading offset */
-+	*off = 0;
-+	pr_debug("Read of (%lu) bytes performed.\n", sizeof(link_states));
-+
-+	return sizeof(link_states);
-+}
-+
-+/**
-+ * This function is for getting some commands from user through non-IOCTL
-+ * channel. It can used to configure the device.
-+ * TODO: To be filled in future, if require duplex communication with user
-+ * space.
-+ */
-+static ssize_t pfe_cdev_write(struct file *fp, const char *buf,
-+			      size_t len, loff_t *off)
-+{
-+	pr_info("PFE CDEV Write operation not supported!\n");
-+
-+	return -EFAULT;
-+}
-+
-+static int pfe_cdev_release(struct inode *inp, struct file *fp)
-+{
-+	if (g_trigger) {
-+		free_irq(pfe->hif_irq, g_trigger);
-+		eventfd_ctx_put(g_trigger);
-+		g_trigger = NULL;
-+	}
-+
-+	pr_info("PFE_CDEV: Device successfully closed\n");
-+	return 0;
-+}
-+
-+/*
-+ * hif_us_isr-
-+ * This ISR routine processes Rx/Tx done interrupts from the HIF hardware block
-+ */
-+static irqreturn_t hif_us_isr(int irq, void *arg)
-+{
-+	struct eventfd_ctx *trigger = (struct eventfd_ctx *)arg;
-+	int int_status;
-+	int int_enable_mask;
-+
-+	/*Read hif interrupt source register */
-+	int_status = readl_relaxed(HIF_INT_SRC);
-+	int_enable_mask = readl_relaxed(HIF_INT_ENABLE);
-+
-+	if ((int_status & HIF_INT) == 0)
-+		return IRQ_NONE;
-+
-+	if (int_status & HIF_RXPKT_INT) {
-+		int_enable_mask &= ~(HIF_RXPKT_INT);
-+		/* Disable interrupts, they will be enabled after
-+		 * they are serviced
-+		 */
-+		writel_relaxed(int_enable_mask, HIF_INT_ENABLE);
-+
-+		eventfd_signal(trigger, 1);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+#define PFE_INTR_COAL_USECS	100
-+static long pfe_cdev_ioctl(struct file *fp, unsigned int cmd,
-+			   unsigned long arg)
-+{
-+	int ret = -EFAULT;
-+	int __user *argp = (int __user *)arg;
-+
-+	pr_debug("PFE CDEV IOCTL Called with cmd=(%u)\n", cmd);
-+
-+	switch (cmd) {
-+	case PFE_CDEV_ETH0_STATE_GET:
-+		/* Return an unsigned int (link state) for ETH0 */
-+		*argp = link_states[0].state;
-+		pr_debug("Returning state=%d for ETH0\n", *argp);
-+		ret = 0;
-+		break;
-+	case PFE_CDEV_ETH1_STATE_GET:
-+		/* Return an unsigned int (link state) for ETH0 */
-+		*argp = link_states[1].state;
-+		pr_debug("Returning state=%d for ETH1\n", *argp);
-+		ret = 0;
-+		break;
-+	case PFE_CDEV_HIF_INTR_EN:
-+		/* Return success/failure */
-+		g_trigger = eventfd_ctx_fdget(*argp);
-+		if (IS_ERR(g_trigger))
-+			return PTR_ERR(g_trigger);
-+		ret = request_irq(pfe->hif_irq, hif_us_isr, 0, "pfe_hif",
-+				  g_trigger);
-+		if (ret) {
-+			pr_err("%s: failed to get the hif IRQ = %d\n",
-+			       __func__, pfe->hif_irq);
-+			eventfd_ctx_put(g_trigger);
-+			g_trigger = NULL;
-+		}
-+		writel((PFE_INTR_COAL_USECS * (pfe->ctrl.sys_clk / 1000)) |
-+			HIF_INT_COAL_ENABLE, HIF_INT_COAL);
-+
-+		pr_debug("request_irq for hif interrupt: %d\n", pfe->hif_irq);
-+		ret = 0;
-+		break;
-+	default:
-+		pr_info("Unsupport cmd (%d) for PFE CDEV.\n", cmd);
-+		break;
-+	};
-+
-+	return ret;
-+}
-+
-+static unsigned int pfe_cdev_poll(struct file *fp,
-+				  struct poll_table_struct *wait)
-+{
-+	pr_info("PFE CDEV poll method not supported\n");
-+	return 0;
-+}
-+
-+static const struct file_operations pfe_cdev_fops = {
-+	.open = pfe_cdev_open,
-+	.read = pfe_cdev_read,
-+	.write = pfe_cdev_write,
-+	.release = pfe_cdev_release,
-+	.unlocked_ioctl = pfe_cdev_ioctl,
-+	.poll = pfe_cdev_poll,
-+};
-+
-+int pfe_cdev_init(void)
-+{
-+	int ret;
-+
-+	pr_debug("PFE CDEV initialization begin\n");
-+
-+	/* Register the major number for the device */
-+	pfe_majno = register_chrdev(0, PFE_CDEV_NAME, &pfe_cdev_fops);
-+	if (pfe_majno < 0) {
-+		pr_err("Unable to register PFE CDEV. PFE CDEV not available\n");
-+		ret = pfe_majno;
-+		goto cleanup;
-+	}
-+
-+	pr_debug("PFE CDEV assigned major number: %d\n", pfe_majno);
-+
-+	/* Register the class for the device */
-+	pfe_char_class = class_create(THIS_MODULE, PFE_CLASS_NAME);
-+	if (IS_ERR(pfe_char_class)) {
-+		pr_err(
-+		"Failed to init class for PFE CDEV. PFE CDEV not available.\n");
-+		ret = PTR_ERR(pfe_char_class);
-+		goto cleanup;
-+	}
-+
-+	pr_debug("PFE CDEV Class created successfully.\n");
-+
-+	/* Create the device without any parent and without any callback data */
-+	    pfe_char_dev = device_create(pfe_char_class, NULL,
-+					 MKDEV(pfe_majno, 0), NULL,
-+					 PFE_CDEV_NAME);
-+	if (IS_ERR(pfe_char_dev)) {
-+		pr_err("Unable to PFE CDEV device. PFE CDEV not available.\n");
-+		ret = PTR_ERR(pfe_char_dev);
-+		goto cleanup;
-+	}
-+
-+	/* Information structure being shared with the userspace */
-+	memset(link_states, 0, sizeof(struct pfe_shared_info) *
-+			PFE_CDEV_ETH_COUNT);
-+
-+	pr_info("PFE CDEV created: %s\n", PFE_CDEV_NAME);
-+
-+	ret = 0;
-+	return ret;
-+
-+cleanup:
-+	if (!IS_ERR(pfe_char_class))
-+		class_destroy(pfe_char_class);
-+
-+	if (pfe_majno > 0)
-+		unregister_chrdev(pfe_majno, PFE_CDEV_NAME);
-+
-+	return ret;
-+}
-+
-+void pfe_cdev_exit(void)
-+{
-+	if (!IS_ERR(pfe_char_dev))
-+		device_destroy(pfe_char_class, MKDEV(pfe_majno, 0));
-+
-+	if (!IS_ERR(pfe_char_class)) {
-+		class_unregister(pfe_char_class);
-+		class_destroy(pfe_char_class);
-+	}
-+
-+	if (pfe_majno > 0)
-+		unregister_chrdev(pfe_majno, PFE_CDEV_NAME);
-+
-+	/* reset the variables */
-+	pfe_majno = 0;
-+	pfe_char_class = NULL;
-+	pfe_char_dev = NULL;
-+
-+	pr_info("PFE CDEV Removed.\n");
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_cdev.h
-@@ -0,0 +1,41 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+/*
-+ * Copyright 2018 NXP
-+ */
-+
-+#ifndef _PFE_CDEV_H_
-+#define _PFE_CDEV_H_
-+
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/err.h>
-+#include <linux/kernel.h>
-+#include <linux/fs.h>
-+#include <linux/uaccess.h>
-+#include <linux/poll.h>
-+
-+#define  PFE_CDEV_NAME "pfe_us_cdev"
-+#define  PFE_CLASS_NAME  "ppfe_us"
-+
-+/* Extracted from ls1012a_pfe_platform_data, there are 3 interfaces which are
-+ * supported by PFE driver. Should be updated if number of eth devices are
-+ * changed.
-+ */
-+#define PFE_CDEV_ETH_COUNT 3
-+
-+struct pfe_shared_info {
-+	uint32_t phy_id; /* Link phy ID */
-+	uint8_t state;  /* Has either 0 or 1 */
-+};
-+
-+extern struct pfe_shared_info link_states[PFE_CDEV_ETH_COUNT];
-+
-+/* IOCTL Commands */
-+#define PFE_CDEV_ETH0_STATE_GET		_IOR('R', 0, int)
-+#define PFE_CDEV_ETH1_STATE_GET		_IOR('R', 1, int)
-+#define PFE_CDEV_HIF_INTR_EN		_IOWR('R', 2, int)
-+
-+int pfe_cdev_init(void);
-+void pfe_cdev_exit(void);
-+
-+#endif /* _PFE_CDEV_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_ctrl.c
-@@ -0,0 +1,226 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/module.h>
-+#include <linux/list.h>
-+#include <linux/kthread.h>
-+
-+#include "pfe_mod.h"
-+#include "pfe_ctrl.h"
-+
-+#define TIMEOUT_MS	1000
-+
-+int relax(unsigned long end)
-+{
-+	if (time_after(jiffies, end)) {
-+		if (time_after(jiffies, end + (TIMEOUT_MS * HZ) / 1000))
-+			return -1;
-+
-+		if (need_resched())
-+			schedule();
-+	}
-+
-+	return 0;
-+}
-+
-+void pfe_ctrl_suspend(struct pfe_ctrl *ctrl)
-+{
-+	int id;
-+
-+	mutex_lock(&ctrl->mutex);
-+
-+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++)
-+		pe_dmem_write(id, cpu_to_be32(0x1), CLASS_DM_RESUME, 4);
-+
-+	for (id = TMU0_ID; id <= TMU_MAX_ID; id++) {
-+		if (id == TMU2_ID)
-+			continue;
-+		pe_dmem_write(id, cpu_to_be32(0x1), TMU_DM_RESUME, 4);
-+	}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	pe_dmem_write(UTIL_ID, cpu_to_be32(0x1), UTIL_DM_RESUME, 4);
-+#endif
-+	mutex_unlock(&ctrl->mutex);
-+}
-+
-+void pfe_ctrl_resume(struct pfe_ctrl *ctrl)
-+{
-+	int pe_mask = CLASS_MASK | TMU_MASK;
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	pe_mask |= UTIL_MASK;
-+#endif
-+	mutex_lock(&ctrl->mutex);
-+	pe_start(&pfe->ctrl, pe_mask);
-+	mutex_unlock(&ctrl->mutex);
-+}
-+
-+/* PE sync stop.
-+ * Stops packet processing for a list of PE's (specified using a bitmask).
-+ * The caller must hold ctrl->mutex.
-+ *
-+ * @param ctrl		Control context
-+ * @param pe_mask	Mask of PE id's to stop
-+ *
-+ */
-+int pe_sync_stop(struct pfe_ctrl *ctrl, int pe_mask)
-+{
-+	struct pe_sync_mailbox *mbox;
-+	int pe_stopped = 0;
-+	unsigned long end = jiffies + 2;
-+	int i;
-+
-+	pe_mask &= 0x2FF;  /*Exclude Util + TMU2 */
-+
-+	for (i = 0; i < MAX_PE; i++)
-+		if (pe_mask & (1 << i)) {
-+			mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
-+
-+			pe_dmem_write(i, cpu_to_be32(0x1), (unsigned
-+					long)&mbox->stop, 4);
-+		}
-+
-+	while (pe_stopped != pe_mask) {
-+		for (i = 0; i < MAX_PE; i++)
-+			if ((pe_mask & (1 << i)) && !(pe_stopped & (1 << i))) {
-+				mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
-+
-+				if (pe_dmem_read(i, (unsigned
-+					long)&mbox->stopped, 4) &
-+					cpu_to_be32(0x1))
-+					pe_stopped |= (1 << i);
-+			}
-+
-+		if (relax(end) < 0)
-+			goto err;
-+	}
-+
-+	return 0;
-+
-+err:
-+	pr_err("%s: timeout, %x %x\n", __func__, pe_mask, pe_stopped);
-+
-+	for (i = 0; i < MAX_PE; i++)
-+		if (pe_mask & (1 << i)) {
-+			mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
-+
-+			pe_dmem_write(i, cpu_to_be32(0x0), (unsigned
-+					long)&mbox->stop, 4);
-+	}
-+
-+	return -EIO;
-+}
-+
-+/* PE start.
-+ * Starts packet processing for a list of PE's (specified using a bitmask).
-+ * The caller must hold ctrl->mutex.
-+ *
-+ * @param ctrl		Control context
-+ * @param pe_mask	Mask of PE id's to start
-+ *
-+ */
-+void pe_start(struct pfe_ctrl *ctrl, int pe_mask)
-+{
-+	struct pe_sync_mailbox *mbox;
-+	int i;
-+
-+	for (i = 0; i < MAX_PE; i++)
-+		if (pe_mask & (1 << i)) {
-+			mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
-+
-+			pe_dmem_write(i, cpu_to_be32(0x0), (unsigned
-+					long)&mbox->stop, 4);
-+		}
-+}
-+
-+/* This function will ensure all PEs are put in to idle state */
-+int pe_reset_all(struct pfe_ctrl *ctrl)
-+{
-+	struct pe_sync_mailbox *mbox;
-+	int pe_stopped = 0;
-+	unsigned long end = jiffies + 2;
-+	int i;
-+	int pe_mask  = CLASS_MASK | TMU_MASK;
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	pe_mask |= UTIL_MASK;
-+#endif
-+
-+	for (i = 0; i < MAX_PE; i++)
-+		if (pe_mask & (1 << i)) {
-+			mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
-+
-+			pe_dmem_write(i, cpu_to_be32(0x2), (unsigned
-+					long)&mbox->stop, 4);
-+		}
-+
-+	while (pe_stopped != pe_mask) {
-+		for (i = 0; i < MAX_PE; i++)
-+			if ((pe_mask & (1 << i)) && !(pe_stopped & (1 << i))) {
-+				mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
-+
-+				if (pe_dmem_read(i, (unsigned long)
-+							&mbox->stopped, 4) &
-+						cpu_to_be32(0x1))
-+					pe_stopped |= (1 << i);
-+			}
-+
-+		if (relax(end) < 0)
-+			goto err;
-+	}
-+
-+	return 0;
-+
-+err:
-+	pr_err("%s: timeout, %x %x\n", __func__, pe_mask, pe_stopped);
-+	return -EIO;
-+}
-+
-+int pfe_ctrl_init(struct pfe *pfe)
-+{
-+	struct pfe_ctrl *ctrl = &pfe->ctrl;
-+	int id;
-+
-+	pr_info("%s\n", __func__);
-+
-+	mutex_init(&ctrl->mutex);
-+	spin_lock_init(&ctrl->lock);
-+
-+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
-+		ctrl->sync_mailbox_baseaddr[id] = CLASS_DM_SYNC_MBOX;
-+		ctrl->msg_mailbox_baseaddr[id] = CLASS_DM_MSG_MBOX;
-+	}
-+
-+	for (id = TMU0_ID; id <= TMU_MAX_ID; id++) {
-+		if (id == TMU2_ID)
-+			continue;
-+		ctrl->sync_mailbox_baseaddr[id] = TMU_DM_SYNC_MBOX;
-+		ctrl->msg_mailbox_baseaddr[id] = TMU_DM_MSG_MBOX;
-+	}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	ctrl->sync_mailbox_baseaddr[UTIL_ID] = UTIL_DM_SYNC_MBOX;
-+	ctrl->msg_mailbox_baseaddr[UTIL_ID] = UTIL_DM_MSG_MBOX;
-+#endif
-+
-+	ctrl->hash_array_baseaddr = pfe->ddr_baseaddr + ROUTE_TABLE_BASEADDR;
-+	ctrl->hash_array_phys_baseaddr = pfe->ddr_phys_baseaddr +
-+						ROUTE_TABLE_BASEADDR;
-+
-+	ctrl->dev = pfe->dev;
-+
-+	pr_info("%s finished\n", __func__);
-+
-+	return 0;
-+}
-+
-+void pfe_ctrl_exit(struct pfe *pfe)
-+{
-+	pr_info("%s\n", __func__);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_ctrl.h
-@@ -0,0 +1,100 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#ifndef _PFE_CTRL_H_
-+#define _PFE_CTRL_H_
-+
-+#include <linux/dmapool.h>
-+
-+#include "pfe/pfe.h"
-+
-+#define DMA_BUF_SIZE_128	0x80	/* enough for 1 conntracks */
-+#define DMA_BUF_SIZE_256	0x100
-+/* enough for 2 conntracks, 1 bridge entry or 1 multicast entry */
-+#define DMA_BUF_SIZE_512	0x200
-+/* 512bytes dma allocated buffers used by rtp relay feature */
-+#define DMA_BUF_MIN_ALIGNMENT	8
-+#define DMA_BUF_BOUNDARY	(4 * 1024)
-+/* bursts can not cross 4k boundary */
-+
-+#define CMD_TX_ENABLE	0x0501
-+#define CMD_TX_DISABLE	0x0502
-+
-+#define CMD_RX_LRO		0x0011
-+#define CMD_PKTCAP_ENABLE       0x0d01
-+#define CMD_QM_EXPT_RATE	0x020c
-+
-+#define CLASS_DM_SH_STATIC		(0x800)
-+#define CLASS_DM_CPU_TICKS		(CLASS_DM_SH_STATIC)
-+#define CLASS_DM_SYNC_MBOX		(0x808)
-+#define CLASS_DM_MSG_MBOX		(0x810)
-+#define CLASS_DM_DROP_CNTR		(0x820)
-+#define CLASS_DM_RESUME			(0x854)
-+#define CLASS_DM_PESTATUS		(0x860)
-+#define CLASS_DM_CRC_VALIDATED		(0x14b0)
-+
-+#define TMU_DM_SH_STATIC		(0x80)
-+#define TMU_DM_CPU_TICKS		(TMU_DM_SH_STATIC)
-+#define TMU_DM_SYNC_MBOX		(0x88)
-+#define TMU_DM_MSG_MBOX			(0x90)
-+#define TMU_DM_RESUME			(0xA0)
-+#define TMU_DM_PESTATUS			(0xB0)
-+#define TMU_DM_CONTEXT			(0x300)
-+#define TMU_DM_TX_TRANS			(0x480)
-+
-+#define UTIL_DM_SH_STATIC		(0x0)
-+#define UTIL_DM_CPU_TICKS		(UTIL_DM_SH_STATIC)
-+#define UTIL_DM_SYNC_MBOX		(0x8)
-+#define UTIL_DM_MSG_MBOX		(0x10)
-+#define UTIL_DM_DROP_CNTR		(0x20)
-+#define UTIL_DM_RESUME			(0x40)
-+#define UTIL_DM_PESTATUS		(0x50)
-+
-+struct pfe_ctrl {
-+	struct mutex mutex; /* to serialize pfe control access */
-+	spinlock_t lock;
-+
-+	void *dma_pool;
-+	void *dma_pool_512;
-+	void *dma_pool_128;
-+
-+	struct device *dev;
-+
-+	void *hash_array_baseaddr;		/*
-+						 * Virtual base address of
-+						 * the conntrack hash array
-+						 */
-+	unsigned long hash_array_phys_baseaddr; /*
-+						 * Physical base address of
-+						 * the conntrack hash array
-+						 */
-+
-+	int (*event_cb)(u16, u16, u16*);
-+
-+	unsigned long sync_mailbox_baseaddr[MAX_PE]; /*
-+						      * Sync mailbox PFE
-+						      * internal address,
-+						      * initialized
-+						      * when parsing elf images
-+						      */
-+	unsigned long msg_mailbox_baseaddr[MAX_PE]; /*
-+						     * Msg mailbox PFE internal
-+						     * address, initialized
-+						     * when parsing elf images
-+						     */
-+	unsigned int sys_clk;			/* AXI clock value, in KHz */
-+};
-+
-+int pfe_ctrl_init(struct pfe *pfe);
-+void pfe_ctrl_exit(struct pfe *pfe);
-+int pe_sync_stop(struct pfe_ctrl *ctrl, int pe_mask);
-+void pe_start(struct pfe_ctrl *ctrl, int pe_mask);
-+int pe_reset_all(struct pfe_ctrl *ctrl);
-+void pfe_ctrl_suspend(struct pfe_ctrl *ctrl);
-+void pfe_ctrl_resume(struct pfe_ctrl *ctrl);
-+int relax(unsigned long end);
-+
-+#endif /* _PFE_CTRL_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_debugfs.c
-@@ -0,0 +1,99 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/debugfs.h>
-+#include <linux/platform_device.h>
-+
-+#include "pfe_mod.h"
-+
-+static int dmem_show(struct seq_file *s, void *unused)
-+{
-+	u32 dmem_addr, val;
-+	int id = (long int)s->private;
-+	int i;
-+
-+	for (dmem_addr = 0; dmem_addr < CLASS_DMEM_SIZE; dmem_addr += 8 * 4) {
-+		seq_printf(s, "%04x:", dmem_addr);
-+
-+		for (i = 0; i < 8; i++) {
-+			val = pe_dmem_read(id, dmem_addr + i * 4, 4);
-+			seq_printf(s, " %02x %02x %02x %02x", val & 0xff,
-+				   (val >> 8) & 0xff, (val >> 16) & 0xff,
-+				   (val >> 24) & 0xff);
-+		}
-+
-+		seq_puts(s, "\n");
-+	}
-+
-+	return 0;
-+}
-+
-+static int dmem_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, dmem_show, inode->i_private);
-+}
-+
-+static const struct file_operations dmem_fops = {
-+	.open		= dmem_open,
-+	.read		= seq_read,
-+	.llseek		= seq_lseek,
-+	.release	= single_release,
-+};
-+
-+int pfe_debugfs_init(struct pfe *pfe)
-+{
-+	struct dentry *d;
-+
-+	pr_info("%s\n", __func__);
-+
-+	pfe->dentry = debugfs_create_dir("pfe", NULL);
-+	if (IS_ERR_OR_NULL(pfe->dentry))
-+		goto err_dir;
-+
-+	d = debugfs_create_file("pe0_dmem", 0444, pfe->dentry, (void *)0,
-+				&dmem_fops);
-+	if (IS_ERR_OR_NULL(d))
-+		goto err_pe;
-+
-+	d = debugfs_create_file("pe1_dmem", 0444, pfe->dentry, (void *)1,
-+				&dmem_fops);
-+	if (IS_ERR_OR_NULL(d))
-+		goto err_pe;
-+
-+	d = debugfs_create_file("pe2_dmem", 0444, pfe->dentry, (void *)2,
-+				&dmem_fops);
-+	if (IS_ERR_OR_NULL(d))
-+		goto err_pe;
-+
-+	d = debugfs_create_file("pe3_dmem", 0444, pfe->dentry, (void *)3,
-+				&dmem_fops);
-+	if (IS_ERR_OR_NULL(d))
-+		goto err_pe;
-+
-+	d = debugfs_create_file("pe4_dmem", 0444, pfe->dentry, (void *)4,
-+				&dmem_fops);
-+	if (IS_ERR_OR_NULL(d))
-+		goto err_pe;
-+
-+	d = debugfs_create_file("pe5_dmem", 0444, pfe->dentry, (void *)5,
-+				&dmem_fops);
-+	if (IS_ERR_OR_NULL(d))
-+		goto err_pe;
-+
-+	return 0;
-+
-+err_pe:
-+	debugfs_remove_recursive(pfe->dentry);
-+
-+err_dir:
-+	return -1;
-+}
-+
-+void pfe_debugfs_exit(struct pfe *pfe)
-+{
-+	debugfs_remove_recursive(pfe->dentry);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_debugfs.h
-@@ -0,0 +1,13 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#ifndef _PFE_DEBUGFS_H_
-+#define _PFE_DEBUGFS_H_
-+
-+int pfe_debugfs_init(struct pfe *pfe);
-+void pfe_debugfs_exit(struct pfe *pfe);
-+
-+#endif /* _PFE_DEBUGFS_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -0,0 +1,2587 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+/* @pfe_eth.c.
-+ *  Ethernet driver for to handle exception path for PFE.
-+ *  - uses HIF functions to send/receive packets.
-+ *  - uses ctrl function to start/stop interfaces.
-+ *  - uses direct register accesses to control phy operation.
-+ */
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/phy.h>
-+#include <linux/timer.h>
-+#include <linux/hrtimer.h>
-+#include <linux/platform_device.h>
-+
-+#include <net/ip.h>
-+#include <net/sock.h>
-+
-+#include <linux/of.h>
-+#include <linux/of_mdio.h>
-+
-+#include <linux/io.h>
-+#include <asm/irq.h>
-+#include <linux/delay.h>
-+#include <linux/regmap.h>
-+#include <linux/i2c.h>
-+#include <linux/sys_soc.h>
-+
-+#if defined(CONFIG_NF_CONNTRACK_MARK)
-+#include <net/netfilter/nf_conntrack.h>
-+#endif
-+
-+#include "pfe_mod.h"
-+#include "pfe_eth.h"
-+#include "pfe_cdev.h"
-+
-+#define LS1012A_REV_1_0		0x87040010
-+
-+bool pfe_use_old_dts_phy;
-+bool pfe_errata_a010897;
-+
-+static void *cbus_emac_base[3];
-+static void *cbus_gpi_base[3];
-+
-+/* Forward Declaration */
-+static void pfe_eth_exit_one(struct pfe_eth_priv_s *priv);
-+static void pfe_eth_flush_tx(struct pfe_eth_priv_s *priv);
-+static void pfe_eth_flush_txQ(struct pfe_eth_priv_s *priv, int tx_q_num, int
-+				from_tx, int n_desc);
-+
-+/* MDIO registers */
-+#define MDIO_SGMII_CR			0x00
-+#define MDIO_SGMII_SR			0x01
-+#define MDIO_SGMII_DEV_ABIL_SGMII	0x04
-+#define MDIO_SGMII_LINK_TMR_L		0x12
-+#define MDIO_SGMII_LINK_TMR_H		0x13
-+#define MDIO_SGMII_IF_MODE		0x14
-+
-+/* SGMII Control defines */
-+#define SGMII_CR_RST			0x8000
-+#define SGMII_CR_AN_EN			0x1000
-+#define SGMII_CR_RESTART_AN		0x0200
-+#define SGMII_CR_FD			0x0100
-+#define SGMII_CR_SPEED_SEL1_1G		0x0040
-+#define SGMII_CR_DEF_VAL		(SGMII_CR_AN_EN | SGMII_CR_FD | \
-+					 SGMII_CR_SPEED_SEL1_1G)
-+
-+/* SGMII IF Mode */
-+#define SGMII_DUPLEX_HALF		0x10
-+#define SGMII_SPEED_10MBPS		0x00
-+#define SGMII_SPEED_100MBPS		0x04
-+#define SGMII_SPEED_1GBPS		0x08
-+#define SGMII_USE_SGMII_AN		0x02
-+#define SGMII_EN			0x01
-+
-+/* SGMII Device Ability for SGMII */
-+#define SGMII_DEV_ABIL_ACK		0x4000
-+#define SGMII_DEV_ABIL_EEE_CLK_STP_EN	0x0100
-+#define SGMII_DEV_ABIL_SGMII		0x0001
-+
-+unsigned int gemac_regs[] = {
-+	0x0004, /* Interrupt event */
-+	0x0008, /* Interrupt mask */
-+	0x0024, /* Ethernet control */
-+	0x0064, /* MIB Control/Status */
-+	0x0084, /* Receive control/status */
-+	0x00C4, /* Transmit control */
-+	0x00E4, /* Physical address low */
-+	0x00E8, /* Physical address high */
-+	0x0144, /* Transmit FIFO Watermark and Store and Forward Control*/
-+	0x0190, /* Receive FIFO Section Full Threshold */
-+	0x01A0, /* Transmit FIFO Section Empty Threshold */
-+	0x01B0, /* Frame Truncation Length */
-+};
-+
-+const struct soc_device_attribute ls1012a_rev1_soc_attr[] = {
-+	{ .family = "QorIQ LS1012A",
-+	  .soc_id = "svr:0x87040010",
-+	  .revision = "1.0",
-+	  .data = NULL },
-+	{ },
-+};
-+
-+/********************************************************************/
-+/*                   SYSFS INTERFACE				    */
-+/********************************************************************/
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+/*
-+ * pfe_eth_show_napi_stats
-+ */
-+static ssize_t pfe_eth_show_napi_stats(struct device *dev,
-+				       struct device_attribute *attr,
-+				       char *buf)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	ssize_t len = 0;
-+
-+	len += sprintf(buf + len, "sched:  %u\n",
-+			priv->napi_counters[NAPI_SCHED_COUNT]);
-+	len += sprintf(buf + len, "poll:   %u\n",
-+			priv->napi_counters[NAPI_POLL_COUNT]);
-+	len += sprintf(buf + len, "packet: %u\n",
-+			priv->napi_counters[NAPI_PACKET_COUNT]);
-+	len += sprintf(buf + len, "budget: %u\n",
-+			priv->napi_counters[NAPI_FULL_BUDGET_COUNT]);
-+	len += sprintf(buf + len, "desc:   %u\n",
-+			priv->napi_counters[NAPI_DESC_COUNT]);
-+
-+	return len;
-+}
-+
-+/*
-+ * pfe_eth_set_napi_stats
-+ */
-+static ssize_t pfe_eth_set_napi_stats(struct device *dev,
-+				      struct device_attribute *attr,
-+				      const char *buf, size_t count)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+
-+	memset(priv->napi_counters, 0, sizeof(priv->napi_counters));
-+
-+	return count;
-+}
-+#endif
-+#ifdef PFE_ETH_TX_STATS
-+/* pfe_eth_show_tx_stats
-+ *
-+ */
-+static ssize_t pfe_eth_show_tx_stats(struct device *dev,
-+				     struct device_attribute *attr,
-+				     char *buf)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	ssize_t len = 0;
-+	int i;
-+
-+	len += sprintf(buf + len, "TX queues stats:\n");
-+
-+	for (i = 0; i < emac_txq_cnt; i++) {
-+		struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
-+									i);
-+
-+		len += sprintf(buf + len, "\n");
-+		__netif_tx_lock_bh(tx_queue);
-+
-+		hif_tx_lock(&pfe->hif);
-+		len += sprintf(buf + len,
-+				"Queue %2d :  credits               = %10d\n"
-+				, i, hif_lib_tx_credit_avail(pfe, priv->id, i));
-+		len += sprintf(buf + len,
-+				 "            tx packets            = %10d\n"
-+				,  pfe->tmu_credit.tx_packets[priv->id][i]);
-+		hif_tx_unlock(&pfe->hif);
-+
-+		/* Don't output additionnal stats if queue never used */
-+		if (!pfe->tmu_credit.tx_packets[priv->id][i])
-+			goto skip;
-+
-+		len += sprintf(buf + len,
-+				 "            clean_fail            = %10d\n"
-+				, priv->clean_fail[i]);
-+		len += sprintf(buf + len,
-+				 "            stop_queue            = %10d\n"
-+				, priv->stop_queue_total[i]);
-+		len += sprintf(buf + len,
-+				 "            stop_queue_hif        = %10d\n"
-+				, priv->stop_queue_hif[i]);
-+		len += sprintf(buf + len,
-+				"            stop_queue_hif_client = %10d\n"
-+				, priv->stop_queue_hif_client[i]);
-+		len += sprintf(buf + len,
-+				 "            stop_queue_credit     = %10d\n"
-+				, priv->stop_queue_credit[i]);
-+skip:
-+		__netif_tx_unlock_bh(tx_queue);
-+	}
-+	return len;
-+}
-+
-+/* pfe_eth_set_tx_stats
-+ *
-+ */
-+static ssize_t pfe_eth_set_tx_stats(struct device *dev,
-+				    struct device_attribute *attr,
-+				    const char *buf, size_t count)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	int i;
-+
-+	for (i = 0; i < emac_txq_cnt; i++) {
-+		struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
-+									i);
-+
-+		__netif_tx_lock_bh(tx_queue);
-+		priv->clean_fail[i] = 0;
-+		priv->stop_queue_total[i] = 0;
-+		priv->stop_queue_hif[i] = 0;
-+		priv->stop_queue_hif_client[i] = 0;
-+		priv->stop_queue_credit[i] = 0;
-+		__netif_tx_unlock_bh(tx_queue);
-+	}
-+
-+	return count;
-+}
-+#endif
-+/* pfe_eth_show_txavail
-+ *
-+ */
-+static ssize_t pfe_eth_show_txavail(struct device *dev,
-+				    struct device_attribute *attr,
-+				    char *buf)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	ssize_t len = 0;
-+	int i;
-+
-+	for (i = 0; i < emac_txq_cnt; i++) {
-+		struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
-+									i);
-+
-+		__netif_tx_lock_bh(tx_queue);
-+
-+		len += sprintf(buf + len, "%d",
-+				hif_lib_tx_avail(&priv->client, i));
-+
-+		__netif_tx_unlock_bh(tx_queue);
-+
-+		if (i == (emac_txq_cnt - 1))
-+			len += sprintf(buf + len, "\n");
-+		else
-+			len += sprintf(buf + len, " ");
-+	}
-+
-+	return len;
-+}
-+
-+/* pfe_eth_show_default_priority
-+ *
-+ */
-+static ssize_t pfe_eth_show_default_priority(struct device *dev,
-+					     struct device_attribute *attr,
-+						char *buf)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	unsigned long flags;
-+	int rc;
-+
-+	spin_lock_irqsave(&priv->lock, flags);
-+	rc = sprintf(buf, "%d\n", priv->default_priority);
-+	spin_unlock_irqrestore(&priv->lock, flags);
-+
-+	return rc;
-+}
-+
-+/* pfe_eth_set_default_priority
-+ *
-+ */
-+
-+static ssize_t pfe_eth_set_default_priority(struct device *dev,
-+					    struct device_attribute *attr,
-+					    const char *buf, size_t count)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&priv->lock, flags);
-+	priv->default_priority = kstrtoul(buf, 0, 0);
-+	spin_unlock_irqrestore(&priv->lock, flags);
-+
-+	return count;
-+}
-+
-+static DEVICE_ATTR(txavail, 0444, pfe_eth_show_txavail, NULL);
-+static DEVICE_ATTR(default_priority, 0644, pfe_eth_show_default_priority,
-+			pfe_eth_set_default_priority);
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+static DEVICE_ATTR(napi_stats, 0644, pfe_eth_show_napi_stats,
-+			pfe_eth_set_napi_stats);
-+#endif
-+
-+#ifdef PFE_ETH_TX_STATS
-+static DEVICE_ATTR(tx_stats, 0644, pfe_eth_show_tx_stats,
-+			pfe_eth_set_tx_stats);
-+#endif
-+
-+/*
-+ * pfe_eth_sysfs_init
-+ *
-+ */
-+static int pfe_eth_sysfs_init(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	int err;
-+
-+	/* Initialize the default values */
-+
-+	/*
-+	 * By default, packets without conntrack will use this default low
-+	 * priority queue
-+	 */
-+	priv->default_priority = 0;
-+
-+	/* Create our sysfs files */
-+	err = device_create_file(&ndev->dev, &dev_attr_default_priority);
-+	if (err) {
-+		netdev_err(ndev,
-+			   "failed to create default_priority sysfs files\n");
-+		goto err_priority;
-+	}
-+
-+	err = device_create_file(&ndev->dev, &dev_attr_txavail);
-+	if (err) {
-+		netdev_err(ndev,
-+			   "failed to create default_priority sysfs files\n");
-+		goto err_txavail;
-+	}
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+	err = device_create_file(&ndev->dev, &dev_attr_napi_stats);
-+	if (err) {
-+		netdev_err(ndev, "failed to create napi stats sysfs files\n");
-+		goto err_napi;
-+	}
-+#endif
-+
-+#ifdef PFE_ETH_TX_STATS
-+	err = device_create_file(&ndev->dev, &dev_attr_tx_stats);
-+	if (err) {
-+		netdev_err(ndev, "failed to create tx stats sysfs files\n");
-+		goto err_tx;
-+	}
-+#endif
-+
-+	return 0;
-+
-+#ifdef PFE_ETH_TX_STATS
-+err_tx:
-+#endif
-+#ifdef PFE_ETH_NAPI_STATS
-+	device_remove_file(&ndev->dev, &dev_attr_napi_stats);
-+
-+err_napi:
-+#endif
-+	device_remove_file(&ndev->dev, &dev_attr_txavail);
-+
-+err_txavail:
-+	device_remove_file(&ndev->dev, &dev_attr_default_priority);
-+
-+err_priority:
-+	return -1;
-+}
-+
-+/* pfe_eth_sysfs_exit
-+ *
-+ */
-+void pfe_eth_sysfs_exit(struct net_device *ndev)
-+{
-+#ifdef PFE_ETH_TX_STATS
-+	device_remove_file(&ndev->dev, &dev_attr_tx_stats);
-+#endif
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+	device_remove_file(&ndev->dev, &dev_attr_napi_stats);
-+#endif
-+	device_remove_file(&ndev->dev, &dev_attr_txavail);
-+	device_remove_file(&ndev->dev, &dev_attr_default_priority);
-+}
-+
-+/*************************************************************************/
-+/*		ETHTOOL INTERCAE					 */
-+/*************************************************************************/
-+
-+/*MTIP GEMAC */
-+static const struct fec_stat {
-+	char name[ETH_GSTRING_LEN];
-+	u16 offset;
-+} fec_stats[] = {
-+	/* RMON TX */
-+	{ "tx_dropped", RMON_T_DROP },
-+	{ "tx_packets", RMON_T_PACKETS },
-+	{ "tx_broadcast", RMON_T_BC_PKT },
-+	{ "tx_multicast", RMON_T_MC_PKT },
-+	{ "tx_crc_errors", RMON_T_CRC_ALIGN },
-+	{ "tx_undersize", RMON_T_UNDERSIZE },
-+	{ "tx_oversize", RMON_T_OVERSIZE },
-+	{ "tx_fragment", RMON_T_FRAG },
-+	{ "tx_jabber", RMON_T_JAB },
-+	{ "tx_collision", RMON_T_COL },
-+	{ "tx_64byte", RMON_T_P64 },
-+	{ "tx_65to127byte", RMON_T_P65TO127 },
-+	{ "tx_128to255byte", RMON_T_P128TO255 },
-+	{ "tx_256to511byte", RMON_T_P256TO511 },
-+	{ "tx_512to1023byte", RMON_T_P512TO1023 },
-+	{ "tx_1024to2047byte", RMON_T_P1024TO2047 },
-+	{ "tx_GTE2048byte", RMON_T_P_GTE2048 },
-+	{ "tx_octets", RMON_T_OCTETS },
-+
-+	/* IEEE TX */
-+	{ "IEEE_tx_drop", IEEE_T_DROP },
-+	{ "IEEE_tx_frame_ok", IEEE_T_FRAME_OK },
-+	{ "IEEE_tx_1col", IEEE_T_1COL },
-+	{ "IEEE_tx_mcol", IEEE_T_MCOL },
-+	{ "IEEE_tx_def", IEEE_T_DEF },
-+	{ "IEEE_tx_lcol", IEEE_T_LCOL },
-+	{ "IEEE_tx_excol", IEEE_T_EXCOL },
-+	{ "IEEE_tx_macerr", IEEE_T_MACERR },
-+	{ "IEEE_tx_cserr", IEEE_T_CSERR },
-+	{ "IEEE_tx_sqe", IEEE_T_SQE },
-+	{ "IEEE_tx_fdxfc", IEEE_T_FDXFC },
-+	{ "IEEE_tx_octets_ok", IEEE_T_OCTETS_OK },
-+
-+	/* RMON RX */
-+	{ "rx_packets", RMON_R_PACKETS },
-+	{ "rx_broadcast", RMON_R_BC_PKT },
-+	{ "rx_multicast", RMON_R_MC_PKT },
-+	{ "rx_crc_errors", RMON_R_CRC_ALIGN },
-+	{ "rx_undersize", RMON_R_UNDERSIZE },
-+	{ "rx_oversize", RMON_R_OVERSIZE },
-+	{ "rx_fragment", RMON_R_FRAG },
-+	{ "rx_jabber", RMON_R_JAB },
-+	{ "rx_64byte", RMON_R_P64 },
-+	{ "rx_65to127byte", RMON_R_P65TO127 },
-+	{ "rx_128to255byte", RMON_R_P128TO255 },
-+	{ "rx_256to511byte", RMON_R_P256TO511 },
-+	{ "rx_512to1023byte", RMON_R_P512TO1023 },
-+	{ "rx_1024to2047byte", RMON_R_P1024TO2047 },
-+	{ "rx_GTE2048byte", RMON_R_P_GTE2048 },
-+	{ "rx_octets", RMON_R_OCTETS },
-+
-+	/* IEEE RX */
-+	{ "IEEE_rx_drop", IEEE_R_DROP },
-+	{ "IEEE_rx_frame_ok", IEEE_R_FRAME_OK },
-+	{ "IEEE_rx_crc", IEEE_R_CRC },
-+	{ "IEEE_rx_align", IEEE_R_ALIGN },
-+	{ "IEEE_rx_macerr", IEEE_R_MACERR },
-+	{ "IEEE_rx_fdxfc", IEEE_R_FDXFC },
-+	{ "IEEE_rx_octets_ok", IEEE_R_OCTETS_OK },
-+};
-+
-+static void pfe_eth_fill_stats(struct net_device *ndev, struct ethtool_stats
-+				*stats, u64 *data)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	int i;
-+	u64 pfe_crc_validated = 0;
-+	int id;
-+
-+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
-+		pfe_crc_validated += be32_to_cpu(pe_dmem_read(id,
-+			CLASS_DM_CRC_VALIDATED + (priv->id * 4), 4));
-+	}
-+
-+	for (i = 0; i < ARRAY_SIZE(fec_stats); i++) {
-+		data[i] = readl(priv->EMAC_baseaddr + fec_stats[i].offset);
-+
-+		if (fec_stats[i].offset == IEEE_R_DROP)
-+			data[i] -= pfe_crc_validated;
-+	}
-+}
-+
-+static void pfe_eth_gstrings(struct net_device *netdev,
-+			     u32 stringset, u8 *data)
-+{
-+	int i;
-+
-+	switch (stringset) {
-+	case ETH_SS_STATS:
-+		for (i = 0; i < ARRAY_SIZE(fec_stats); i++)
-+			memcpy(data + i * ETH_GSTRING_LEN,
-+			       fec_stats[i].name, ETH_GSTRING_LEN);
-+		break;
-+	}
-+}
-+
-+static int pfe_eth_stats_count(struct net_device *ndev, int sset)
-+{
-+	switch (sset) {
-+	case ETH_SS_STATS:
-+		return ARRAY_SIZE(fec_stats);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+/*
-+ * pfe_eth_gemac_reglen - Return the length of the register structure.
-+ *
-+ */
-+static int pfe_eth_gemac_reglen(struct net_device *ndev)
-+{
-+	pr_info("%s()\n", __func__);
-+	return (sizeof(gemac_regs) / sizeof(u32));
-+}
-+
-+/*
-+ * pfe_eth_gemac_get_regs - Return the gemac register structure.
-+ *
-+ */
-+static void  pfe_eth_gemac_get_regs(struct net_device *ndev, struct ethtool_regs
-+					*regs, void *regbuf)
-+{
-+	int i;
-+
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	u32 *buf = (u32 *)regbuf;
-+
-+	pr_info("%s()\n", __func__);
-+	for (i = 0; i < sizeof(gemac_regs) / sizeof(u32); i++)
-+		buf[i] = readl(priv->EMAC_baseaddr + gemac_regs[i]);
-+}
-+
-+/*
-+ * pfe_eth_set_wol - Set the magic packet option, in WoL register.
-+ *
-+ */
-+static int pfe_eth_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	if (wol->wolopts & ~WAKE_MAGIC)
-+		return -EOPNOTSUPP;
-+
-+	/* for MTIP we store wol->wolopts */
-+	priv->wol = wol->wolopts;
-+
-+	device_set_wakeup_enable(&ndev->dev, wol->wolopts & WAKE_MAGIC);
-+
-+	return 0;
-+}
-+
-+/*
-+ *
-+ * pfe_eth_get_wol - Get the WoL options.
-+ *
-+ */
-+static void pfe_eth_get_wol(struct net_device *ndev, struct ethtool_wolinfo
-+				*wol)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	wol->supported = WAKE_MAGIC;
-+	wol->wolopts = 0;
-+
-+	if (priv->wol & WAKE_MAGIC)
-+		wol->wolopts = WAKE_MAGIC;
-+
-+	memset(&wol->sopass, 0, sizeof(wol->sopass));
-+}
-+
-+/*
-+ * pfe_eth_get_drvinfo -  Fills in the drvinfo structure with some basic info
-+ *
-+ */
-+static void pfe_eth_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo
-+				*drvinfo)
-+{
-+	strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver));
-+	strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version));
-+	strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
-+	strlcpy(drvinfo->bus_info, "N/A", sizeof(drvinfo->bus_info));
-+}
-+
-+/*
-+ * pfe_eth_set_settings - Used to send commands to PHY.
-+ *
-+ */
-+static int pfe_eth_set_settings(struct net_device *ndev,
-+				const struct ethtool_link_ksettings *cmd)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	struct phy_device *phydev = priv->phydev;
-+
-+	if (!phydev)
-+		return -ENODEV;
-+
-+	return phy_ethtool_ksettings_set(phydev, cmd);
-+}
-+
-+/*
-+ * pfe_eth_getsettings - Return the current settings in the ethtool_cmd
-+ * structure.
-+ *
-+ */
-+static int pfe_eth_get_settings(struct net_device *ndev,
-+				struct ethtool_link_ksettings *cmd)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	struct phy_device *phydev = priv->phydev;
-+
-+	if (!phydev)
-+		return -ENODEV;
-+
-+	phy_ethtool_ksettings_get(phydev, cmd);
-+
-+	return 0;
-+}
-+
-+/*
-+ * pfe_eth_get_msglevel - Gets the debug message mask.
-+ *
-+ */
-+static uint32_t pfe_eth_get_msglevel(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	return priv->msg_enable;
-+}
-+
-+/*
-+ * pfe_eth_set_msglevel - Sets the debug message mask.
-+ *
-+ */
-+static void pfe_eth_set_msglevel(struct net_device *ndev, uint32_t data)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	priv->msg_enable = data;
-+}
-+
-+#define HIF_RX_COAL_MAX_CLKS		(~(1 << 31))
-+#define HIF_RX_COAL_CLKS_PER_USEC	(pfe->ctrl.sys_clk / 1000)
-+#define HIF_RX_COAL_MAX_USECS		(HIF_RX_COAL_MAX_CLKS	/ \
-+						HIF_RX_COAL_CLKS_PER_USEC)
-+
-+/*
-+ * pfe_eth_set_coalesce - Sets rx interrupt coalescing timer.
-+ *
-+ */
-+static int pfe_eth_set_coalesce(struct net_device *ndev,
-+				struct ethtool_coalesce *ec)
-+{
-+	if (ec->rx_coalesce_usecs > HIF_RX_COAL_MAX_USECS)
-+		return -EINVAL;
-+
-+	if (!ec->rx_coalesce_usecs) {
-+		writel(0, HIF_INT_COAL);
-+		return 0;
-+	}
-+
-+	writel((ec->rx_coalesce_usecs * HIF_RX_COAL_CLKS_PER_USEC) |
-+			HIF_INT_COAL_ENABLE, HIF_INT_COAL);
-+
-+	return 0;
-+}
-+
-+/*
-+ * pfe_eth_get_coalesce - Gets rx interrupt coalescing timer value.
-+ *
-+ */
-+static int pfe_eth_get_coalesce(struct net_device *ndev,
-+				struct ethtool_coalesce *ec)
-+{
-+	int reg_val = readl(HIF_INT_COAL);
-+
-+	if (reg_val & HIF_INT_COAL_ENABLE)
-+		ec->rx_coalesce_usecs = (reg_val & HIF_RX_COAL_MAX_CLKS) /
-+						HIF_RX_COAL_CLKS_PER_USEC;
-+	else
-+		ec->rx_coalesce_usecs = 0;
-+
-+	return 0;
-+}
-+
-+/*
-+ * pfe_eth_set_pauseparam - Sets pause parameters
-+ *
-+ */
-+static int pfe_eth_set_pauseparam(struct net_device *ndev,
-+				  struct ethtool_pauseparam *epause)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	if (epause->tx_pause != epause->rx_pause) {
-+		netdev_info(ndev,
-+			    "hardware only support enable/disable both tx and rx\n");
-+		return -EINVAL;
-+	}
-+
-+	priv->pause_flag = 0;
-+	priv->pause_flag |= epause->rx_pause ? PFE_PAUSE_FLAG_ENABLE : 0;
-+	priv->pause_flag |= epause->autoneg ? PFE_PAUSE_FLAG_AUTONEG : 0;
-+
-+	if (epause->rx_pause || epause->autoneg) {
-+		gemac_enable_pause_rx(priv->EMAC_baseaddr);
-+		writel((readl(priv->GPI_baseaddr + GPI_TX_PAUSE_TIME) |
-+					EGPI_PAUSE_ENABLE),
-+				priv->GPI_baseaddr + GPI_TX_PAUSE_TIME);
-+		if (priv->phydev) {
-+			linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-+					 priv->phydev->supported);
-+			linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-+					 priv->phydev->supported);
-+			linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-+					 priv->phydev->advertising);
-+			linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-+					 priv->phydev->advertising);
-+		}
-+	} else {
-+		gemac_disable_pause_rx(priv->EMAC_baseaddr);
-+		writel((readl(priv->GPI_baseaddr + GPI_TX_PAUSE_TIME) &
-+					~EGPI_PAUSE_ENABLE),
-+				priv->GPI_baseaddr + GPI_TX_PAUSE_TIME);
-+		if (priv->phydev) {
-+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-+					   priv->phydev->supported);
-+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-+					   priv->phydev->supported);
-+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-+					   priv->phydev->advertising);
-+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-+					   priv->phydev->advertising);
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * pfe_eth_get_pauseparam - Gets pause parameters
-+ *
-+ */
-+static void pfe_eth_get_pauseparam(struct net_device *ndev,
-+				   struct ethtool_pauseparam *epause)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	epause->autoneg = (priv->pause_flag & PFE_PAUSE_FLAG_AUTONEG) != 0;
-+	epause->tx_pause = (priv->pause_flag & PFE_PAUSE_FLAG_ENABLE) != 0;
-+	epause->rx_pause = epause->tx_pause;
-+}
-+
-+/*
-+ * pfe_eth_get_hash
-+ */
-+#define PFE_HASH_BITS	6		/* #bits in hash */
-+#define CRC32_POLY	0xEDB88320
-+
-+static int pfe_eth_get_hash(u8 *addr)
-+{
-+	unsigned int i, bit, data, crc, hash;
-+
-+	/* calculate crc32 value of mac address */
-+	crc = 0xffffffff;
-+
-+	for (i = 0; i < 6; i++) {
-+		data = addr[i];
-+		for (bit = 0; bit < 8; bit++, data >>= 1) {
-+			crc = (crc >> 1) ^
-+				(((crc ^ data) & 1) ? CRC32_POLY : 0);
-+		}
-+	}
-+
-+	/*
-+	 * only upper 6 bits (PFE_HASH_BITS) are used
-+	 * which point to specific bit in the hash registers
-+	 */
-+	hash = (crc >> (32 - PFE_HASH_BITS)) & 0x3f;
-+
-+	return hash;
-+}
-+
-+const struct ethtool_ops pfe_ethtool_ops = {
-+	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS,
-+	.get_drvinfo = pfe_eth_get_drvinfo,
-+	.get_regs_len = pfe_eth_gemac_reglen,
-+	.get_regs = pfe_eth_gemac_get_regs,
-+	.get_link = ethtool_op_get_link,
-+	.get_wol  = pfe_eth_get_wol,
-+	.set_wol  = pfe_eth_set_wol,
-+	.set_pauseparam = pfe_eth_set_pauseparam,
-+	.get_pauseparam = pfe_eth_get_pauseparam,
-+	.get_strings = pfe_eth_gstrings,
-+	.get_sset_count = pfe_eth_stats_count,
-+	.get_ethtool_stats = pfe_eth_fill_stats,
-+	.get_msglevel = pfe_eth_get_msglevel,
-+	.set_msglevel = pfe_eth_set_msglevel,
-+	.set_coalesce = pfe_eth_set_coalesce,
-+	.get_coalesce = pfe_eth_get_coalesce,
-+	.get_link_ksettings = pfe_eth_get_settings,
-+	.set_link_ksettings = pfe_eth_set_settings,
-+};
-+
-+/* pfe_eth_mdio_reset
-+ */
-+int pfe_eth_mdio_reset(struct mii_bus *bus)
-+{
-+	struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv;
-+	u32 phy_speed;
-+
-+
-+	mutex_lock(&bus->mdio_lock);
-+
-+	/*
-+	 * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed)
-+	 *
-+	 * The formula for FEC MDC is 'ref_freq / (MII_SPEED x 2)' while
-+	 * for ENET-MAC is 'ref_freq / ((MII_SPEED + 1) x 2)'.
-+	 */
-+	phy_speed = (DIV_ROUND_UP((pfe->ctrl.sys_clk * 1000), 4000000)
-+		     << EMAC_MII_SPEED_SHIFT);
-+	phy_speed |= EMAC_HOLDTIME(0x5);
-+	__raw_writel(phy_speed, priv->mdio_base + EMAC_MII_CTRL_REG);
-+
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return 0;
-+}
-+
-+/* pfe_eth_mdio_timeout
-+ *
-+ */
-+static int pfe_eth_mdio_timeout(struct pfe_mdio_priv_s *priv, int timeout)
-+{
-+	while (!(__raw_readl(priv->mdio_base + EMAC_IEVENT_REG) &
-+			EMAC_IEVENT_MII)) {
-+		if (timeout-- <= 0)
-+			return -1;
-+		usleep_range(10, 20);
-+	}
-+	__raw_writel(EMAC_IEVENT_MII, priv->mdio_base + EMAC_IEVENT_REG);
-+	return 0;
-+}
-+
-+static int pfe_eth_mdio_mux(u8 muxval)
-+{
-+	struct i2c_adapter *a;
-+	struct i2c_msg msg;
-+	unsigned char buf[2];
-+	int ret;
-+
-+	a = i2c_get_adapter(0);
-+	if (!a)
-+		return -ENODEV;
-+
-+	/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
-+	buf[0] = 0x54; /* reg number */
-+	buf[1] = (muxval << 6) | 0x3; /* data */
-+	msg.addr = 0x66;
-+	msg.buf = buf;
-+	msg.len = 2;
-+	msg.flags = 0;
-+	ret = i2c_transfer(a, &msg, 1);
-+	i2c_put_adapter(a);
-+	if (ret != 1)
-+		return -ENODEV;
-+	return 0;
-+}
-+
-+static int pfe_eth_mdio_write_addr(struct mii_bus *bus, int mii_id,
-+				   int dev_addr, int regnum)
-+{
-+	struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv;
-+
-+	__raw_writel(EMAC_MII_DATA_PA(mii_id) |
-+		     EMAC_MII_DATA_RA(dev_addr) |
-+		     EMAC_MII_DATA_TA | EMAC_MII_DATA(regnum),
-+		     priv->mdio_base + EMAC_MII_DATA_REG);
-+
-+	if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) {
-+		dev_err(&bus->dev, "phy MDIO address write timeout\n");
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+static int pfe_eth_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-+			      u16 value)
-+{
-+	struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv;
-+
-+	/*To access external PHYs on QDS board mux needs to be configured*/
-+	if ((mii_id) && (pfe->mdio_muxval[mii_id]))
-+		pfe_eth_mdio_mux(pfe->mdio_muxval[mii_id]);
-+
-+	if (regnum & MII_ADDR_C45) {
-+		pfe_eth_mdio_write_addr(bus, mii_id, (regnum >> 16) & 0x1f,
-+					regnum & 0xffff);
-+		__raw_writel(EMAC_MII_DATA_OP_CL45_WR |
-+			     EMAC_MII_DATA_PA(mii_id) |
-+			     EMAC_MII_DATA_RA((regnum >> 16) & 0x1f) |
-+			     EMAC_MII_DATA_TA | EMAC_MII_DATA(value),
-+			     priv->mdio_base + EMAC_MII_DATA_REG);
-+	} else {
-+		/* start a write op */
-+		__raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_WR |
-+			     EMAC_MII_DATA_PA(mii_id) |
-+			     EMAC_MII_DATA_RA(regnum) |
-+			     EMAC_MII_DATA_TA | EMAC_MII_DATA(value),
-+			     priv->mdio_base + EMAC_MII_DATA_REG);
-+	}
-+
-+	if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) {
-+		dev_err(&bus->dev, "%s: phy MDIO write timeout\n", __func__);
-+		return -1;
-+	}
-+	return 0;
-+}
-+
-+static int pfe_eth_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-+{
-+	struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv;
-+	u16 value = 0;
-+
-+	/*To access external PHYs on QDS board mux needs to be configured*/
-+	if ((mii_id) && (pfe->mdio_muxval[mii_id]))
-+		pfe_eth_mdio_mux(pfe->mdio_muxval[mii_id]);
-+
-+	if (regnum & MII_ADDR_C45) {
-+		pfe_eth_mdio_write_addr(bus, mii_id, (regnum >> 16) & 0x1f,
-+					regnum & 0xffff);
-+		__raw_writel(EMAC_MII_DATA_OP_CL45_RD |
-+			     EMAC_MII_DATA_PA(mii_id) |
-+			     EMAC_MII_DATA_RA((regnum >> 16) & 0x1f) |
-+			     EMAC_MII_DATA_TA,
-+			     priv->mdio_base + EMAC_MII_DATA_REG);
-+	} else {
-+		/* start a read op */
-+		__raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_RD |
-+			     EMAC_MII_DATA_PA(mii_id) |
-+			     EMAC_MII_DATA_RA(regnum) |
-+			     EMAC_MII_DATA_TA, priv->mdio_base +
-+			     EMAC_MII_DATA_REG);
-+	}
-+
-+	if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) {
-+		dev_err(&bus->dev, "%s: phy MDIO read timeout\n", __func__);
-+		return -1;
-+	}
-+
-+	value = EMAC_MII_DATA(__raw_readl(priv->mdio_base +
-+						EMAC_MII_DATA_REG));
-+	return value;
-+}
-+
-+static int pfe_eth_mdio_init(struct pfe *pfe,
-+			     struct ls1012a_pfe_platform_data *pfe_info,
-+			     int ii)
-+{
-+	struct pfe_mdio_priv_s *priv = NULL;
-+	struct ls1012a_mdio_platform_data *mdio_info;
-+	struct mii_bus *bus;
-+	struct device_node *mdio_node;
-+	int rc = 0;
-+
-+	mdio_info = (struct ls1012a_mdio_platform_data *)
-+					pfe_info->ls1012a_mdio_pdata;
-+	mdio_info->id = ii;
-+
-+	bus = mdiobus_alloc_size(sizeof(struct pfe_mdio_priv_s));
-+	if (!bus) {
-+		pr_err("mdiobus_alloc() failed\n");
-+		rc = -ENOMEM;
-+		goto err_mdioalloc;
-+	}
-+
-+	bus->name = "ls1012a MDIO Bus";
-+	snprintf(bus->id, MII_BUS_ID_SIZE, "ls1012a-%x", mdio_info->id);
-+
-+	bus->read = &pfe_eth_mdio_read;
-+	bus->write = &pfe_eth_mdio_write;
-+	bus->reset = &pfe_eth_mdio_reset;
-+	bus->parent = pfe->dev;
-+	bus->phy_mask = mdio_info->phy_mask;
-+	bus->irq[0] = mdio_info->irq[0];
-+	priv = bus->priv;
-+	priv->mdio_base = cbus_emac_base[ii];
-+
-+	priv->mdc_div = mdio_info->mdc_div;
-+	if (!priv->mdc_div)
-+		priv->mdc_div = 64;
-+
-+	dev_info(bus->parent, "%s: mdc_div: %d, phy_mask: %x\n",
-+		 __func__, priv->mdc_div, bus->phy_mask);
-+	mdio_node = of_get_child_by_name(pfe->dev->of_node, "mdio");
-+	if ((mdio_info->id == 0) && mdio_node) {
-+		rc = of_mdiobus_register(bus, mdio_node);
-+		of_node_put(mdio_node);
-+	} else {
-+		rc = mdiobus_register(bus);
-+	}
-+
-+	if (rc) {
-+		dev_err(bus->parent, "mdiobus_register(%s) failed\n",
-+			bus->name);
-+		goto err_mdioregister;
-+	}
-+
-+	priv->mii_bus = bus;
-+	pfe->mdio.mdio_priv[ii] = priv;
-+
-+	pfe_eth_mdio_reset(bus);
-+
-+	return 0;
-+
-+err_mdioregister:
-+	mdiobus_free(bus);
-+err_mdioalloc:
-+	return rc;
-+}
-+
-+/* pfe_eth_mdio_exit
-+ */
-+static void pfe_eth_mdio_exit(struct pfe *pfe,
-+			      int ii)
-+{
-+	struct pfe_mdio_priv_s *mdio_priv = pfe->mdio.mdio_priv[ii];
-+	struct mii_bus *bus = mdio_priv->mii_bus;
-+
-+	if (!bus)
-+		return;
-+	mdiobus_unregister(bus);
-+	mdiobus_free(bus);
-+}
-+
-+/* pfe_get_phydev_speed
-+ */
-+static int pfe_get_phydev_speed(struct phy_device *phydev)
-+{
-+	switch (phydev->speed) {
-+	case 10:
-+			return SPEED_10M;
-+	case 100:
-+			return SPEED_100M;
-+	case 1000:
-+	default:
-+			return SPEED_1000M;
-+	}
-+}
-+
-+/* pfe_set_rgmii_speed
-+ */
-+#define RGMIIPCR	0x434
-+/* RGMIIPCR bit definitions*/
-+#define SCFG_RGMIIPCR_EN_AUTO           (0x00000008)
-+#define SCFG_RGMIIPCR_SETSP_1000M       (0x00000004)
-+#define SCFG_RGMIIPCR_SETSP_100M        (0x00000000)
-+#define SCFG_RGMIIPCR_SETSP_10M         (0x00000002)
-+#define SCFG_RGMIIPCR_SETFD             (0x00000001)
-+
-+#define MDIOSELCR	0x484
-+#define MDIOSEL_SERDES	0x0
-+#define MDIOSEL_EXTPHY  0x80000000
-+
-+static void pfe_set_rgmii_speed(struct phy_device *phydev)
-+{
-+	u32 rgmii_pcr;
-+
-+	regmap_read(pfe->scfg, RGMIIPCR, &rgmii_pcr);
-+	rgmii_pcr  &= ~(SCFG_RGMIIPCR_SETSP_1000M | SCFG_RGMIIPCR_SETSP_10M);
-+
-+	switch (phydev->speed) {
-+	case 10:
-+			rgmii_pcr |= SCFG_RGMIIPCR_SETSP_10M;
-+			break;
-+	case 1000:
-+			rgmii_pcr |= SCFG_RGMIIPCR_SETSP_1000M;
-+			break;
-+	case 100:
-+	default:
-+			/* Default is 100M */
-+			break;
-+	}
-+	regmap_write(pfe->scfg, RGMIIPCR, rgmii_pcr);
-+}
-+
-+/* pfe_get_phydev_duplex
-+ */
-+static int pfe_get_phydev_duplex(struct phy_device *phydev)
-+{
-+	/*return (phydev->duplex == DUPLEX_HALF) ? DUP_HALF:DUP_FULL ; */
-+	return DUPLEX_FULL;
-+}
-+
-+/* pfe_eth_adjust_link
-+ */
-+static void pfe_eth_adjust_link(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	unsigned long flags;
-+	struct phy_device *phydev = priv->phydev;
-+	int new_state = 0;
-+
-+	netif_info(priv, drv, ndev, "%s\n", __func__);
-+
-+	spin_lock_irqsave(&priv->lock, flags);
-+
-+	if (phydev->link) {
-+		/*
-+		 * Now we make sure that we can be in full duplex mode.
-+		 * If not, we operate in half-duplex mode.
-+		 */
-+		if (phydev->duplex != priv->oldduplex) {
-+			new_state = 1;
-+			gemac_set_duplex(priv->EMAC_baseaddr,
-+					 pfe_get_phydev_duplex(phydev));
-+			priv->oldduplex = phydev->duplex;
-+		}
-+
-+		if (phydev->speed != priv->oldspeed) {
-+			new_state = 1;
-+			gemac_set_speed(priv->EMAC_baseaddr,
-+					pfe_get_phydev_speed(phydev));
-+			if (priv->einfo->mii_config ==
-+					PHY_INTERFACE_MODE_RGMII_ID)
-+				pfe_set_rgmii_speed(phydev);
-+			priv->oldspeed = phydev->speed;
-+		}
-+
-+		if (!priv->oldlink) {
-+			new_state = 1;
-+			priv->oldlink = 1;
-+		}
-+
-+	} else if (priv->oldlink) {
-+		new_state = 1;
-+		priv->oldlink = 0;
-+		priv->oldspeed = 0;
-+		priv->oldduplex = -1;
-+	}
-+
-+	if (new_state && netif_msg_link(priv))
-+		phy_print_status(phydev);
-+
-+	spin_unlock_irqrestore(&priv->lock, flags);
-+
-+	/* Now, dump the details to the cdev.
-+	 * XXX: Locking would be required? (uniprocess arch)
-+	 *      Or, maybe move it in spinlock above
-+	 */
-+	if (us && priv->einfo->gem_id < PFE_CDEV_ETH_COUNT) {
-+		pr_debug("Changing link state from (%u) to (%u) for ID=(%u)\n",
-+			 link_states[priv->einfo->gem_id].state,
-+			 phydev->link,
-+			 priv->einfo->gem_id);
-+		link_states[priv->einfo->gem_id].phy_id = priv->einfo->gem_id;
-+		link_states[priv->einfo->gem_id].state = phydev->link;
-+	}
-+}
-+
-+/* pfe_phy_exit
-+ */
-+static void pfe_phy_exit(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	netif_info(priv, drv, ndev, "%s\n", __func__);
-+
-+	phy_disconnect(priv->phydev);
-+	priv->phydev = NULL;
-+}
-+
-+/* pfe_eth_stop
-+ */
-+static void pfe_eth_stop(struct net_device *ndev, int wake)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	netif_info(priv, drv, ndev, "%s\n", __func__);
-+
-+	if (wake) {
-+		gemac_tx_disable(priv->EMAC_baseaddr);
-+	} else {
-+		gemac_disable(priv->EMAC_baseaddr);
-+		gpi_disable(priv->GPI_baseaddr);
-+
-+		if (priv->phydev)
-+			phy_stop(priv->phydev);
-+	}
-+}
-+
-+/* pfe_eth_start
-+ */
-+static int pfe_eth_start(struct pfe_eth_priv_s *priv)
-+{
-+	netif_info(priv, drv, priv->ndev, "%s\n", __func__);
-+
-+	if (priv->phydev)
-+		phy_start(priv->phydev);
-+
-+	gpi_enable(priv->GPI_baseaddr);
-+	gemac_enable(priv->EMAC_baseaddr);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Configure on chip serdes through mdio
-+ */
-+static void ls1012a_configure_serdes(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *eth_priv = netdev_priv(ndev);
-+	struct pfe_mdio_priv_s *mdio_priv = pfe->mdio.mdio_priv[eth_priv->id];
-+	int sgmii_2500 = 0;
-+	struct mii_bus *bus = mdio_priv->mii_bus;
-+	u16 value = 0;
-+
-+	if (eth_priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII)
-+		sgmii_2500 = 1;
-+
-+	netif_info(eth_priv, drv, ndev, "%s\n", __func__);
-+	/* PCS configuration done with corresponding GEMAC */
-+
-+	pfe_eth_mdio_read(bus, 0, MDIO_SGMII_CR);
-+	pfe_eth_mdio_read(bus, 0, MDIO_SGMII_SR);
-+
-+	pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, SGMII_CR_RST);
-+
-+	if (sgmii_2500) {
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_IF_MODE, SGMII_SPEED_1GBPS
-+							       | SGMII_EN);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_DEV_ABIL_SGMII,
-+				   SGMII_DEV_ABIL_ACK | SGMII_DEV_ABIL_SGMII);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_L, 0xa120);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_H, 0x7);
-+		/* Autonegotiation need to be disabled for 2.5G SGMII mode*/
-+		value = SGMII_CR_FD | SGMII_CR_SPEED_SEL1_1G;
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, value);
-+	} else {
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_IF_MODE,
-+				   SGMII_SPEED_1GBPS
-+				   | SGMII_USE_SGMII_AN
-+				   | SGMII_EN);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_DEV_ABIL_SGMII,
-+				   SGMII_DEV_ABIL_EEE_CLK_STP_EN
-+				   | 0xa0
-+				   | SGMII_DEV_ABIL_SGMII);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_L, 0x400);
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_H, 0x0);
-+		value = SGMII_CR_AN_EN | SGMII_CR_FD | SGMII_CR_SPEED_SEL1_1G;
-+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, value);
-+	}
-+}
-+
-+/*
-+ * pfe_phy_init
-+ *
-+ */
-+static int pfe_phy_init(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	struct phy_device *phydev;
-+	char phy_id[MII_BUS_ID_SIZE + 3];
-+	char bus_id[MII_BUS_ID_SIZE];
-+	phy_interface_t interface;
-+
-+	priv->oldlink = 0;
-+	priv->oldspeed = 0;
-+	priv->oldduplex = -1;
-+
-+	snprintf(bus_id, MII_BUS_ID_SIZE, "ls1012a-%d", 0);
-+	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
-+		 priv->einfo->phy_id);
-+	netif_info(priv, drv, ndev, "%s: %s\n", __func__, phy_id);
-+	interface = priv->einfo->mii_config;
-+	if ((interface == PHY_INTERFACE_MODE_SGMII) ||
-+	    (interface == PHY_INTERFACE_MODE_2500SGMII)) {
-+		/*Configure SGMII PCS */
-+		if (pfe->scfg) {
-+			/* Config MDIO from serdes */
-+			regmap_write(pfe->scfg, MDIOSELCR, MDIOSEL_SERDES);
-+		}
-+		ls1012a_configure_serdes(ndev);
-+	}
-+
-+	if (pfe->scfg) {
-+		/*Config MDIO from PAD */
-+		regmap_write(pfe->scfg, MDIOSELCR, MDIOSEL_EXTPHY);
-+	}
-+
-+	priv->oldlink = 0;
-+	priv->oldspeed = 0;
-+	priv->oldduplex = -1;
-+	pr_info("%s interface %x\n", __func__, interface);
-+
-+	if (priv->phy_node) {
-+		phydev = of_phy_connect(ndev, priv->phy_node,
-+					pfe_eth_adjust_link, 0,
-+					priv->einfo->mii_config);
-+		if (!(phydev)) {
-+			netdev_err(ndev, "Unable to connect to phy\n");
-+			return -ENODEV;
-+		}
-+
-+	} else {
-+		phydev = phy_connect(ndev, phy_id,
-+				     &pfe_eth_adjust_link, interface);
-+		if (IS_ERR(phydev)) {
-+			netdev_err(ndev, "Unable to connect to phy\n");
-+			return PTR_ERR(phydev);
-+		}
-+	}
-+
-+	priv->phydev = phydev;
-+	phydev->irq = PHY_POLL;
-+
-+	return 0;
-+}
-+
-+/* pfe_gemac_init
-+ */
-+static int pfe_gemac_init(struct pfe_eth_priv_s *priv)
-+{
-+	struct gemac_cfg cfg;
-+
-+	netif_info(priv, ifup, priv->ndev, "%s\n", __func__);
-+
-+	cfg.mode = 0;
-+	cfg.speed = SPEED_1000M;
-+	cfg.duplex = DUPLEX_FULL;
-+
-+	gemac_set_config(priv->EMAC_baseaddr, &cfg);
-+	gemac_allow_broadcast(priv->EMAC_baseaddr);
-+	gemac_enable_1536_rx(priv->EMAC_baseaddr);
-+	gemac_enable_stacked_vlan(priv->EMAC_baseaddr);
-+	gemac_enable_pause_rx(priv->EMAC_baseaddr);
-+	gemac_set_bus_width(priv->EMAC_baseaddr, 64);
-+
-+	/*GEM will perform checksum verifications*/
-+	if (priv->ndev->features & NETIF_F_RXCSUM)
-+		gemac_enable_rx_checksum_offload(priv->EMAC_baseaddr);
-+	else
-+		gemac_disable_rx_checksum_offload(priv->EMAC_baseaddr);
-+
-+	return 0;
-+}
-+
-+/* pfe_eth_event_handler
-+ */
-+static int pfe_eth_event_handler(void *data, int event, int qno)
-+{
-+	struct pfe_eth_priv_s *priv = data;
-+
-+	switch (event) {
-+	case EVENT_RX_PKT_IND:
-+
-+		if (qno == 0) {
-+			if (napi_schedule_prep(&priv->high_napi)) {
-+				netif_info(priv, intr, priv->ndev,
-+					   "%s: schedule high prio poll\n"
-+					   , __func__);
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+				priv->napi_counters[NAPI_SCHED_COUNT]++;
-+#endif
-+
-+				__napi_schedule(&priv->high_napi);
-+			}
-+		} else if (qno == 1) {
-+			if (napi_schedule_prep(&priv->low_napi)) {
-+				netif_info(priv, intr, priv->ndev,
-+					   "%s: schedule low prio poll\n"
-+					   , __func__);
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+				priv->napi_counters[NAPI_SCHED_COUNT]++;
-+#endif
-+				__napi_schedule(&priv->low_napi);
-+			}
-+		} else if (qno == 2) {
-+			if (napi_schedule_prep(&priv->lro_napi)) {
-+				netif_info(priv, intr, priv->ndev,
-+					   "%s: schedule lro prio poll\n"
-+					   , __func__);
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+				priv->napi_counters[NAPI_SCHED_COUNT]++;
-+#endif
-+				__napi_schedule(&priv->lro_napi);
-+			}
-+		}
-+
-+		break;
-+
-+	case EVENT_TXDONE_IND:
-+		pfe_eth_flush_tx(priv);
-+		hif_lib_event_handler_start(&priv->client, EVENT_TXDONE_IND, 0);
-+		break;
-+	case EVENT_HIGH_RX_WM:
-+	default:
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+static int pfe_eth_change_mtu(struct net_device *ndev, int new_mtu)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	ndev->mtu = new_mtu;
-+	new_mtu += ETH_HLEN + ETH_FCS_LEN;
-+	gemac_set_rx_max_fl(priv->EMAC_baseaddr, new_mtu);
-+
-+	return 0;
-+}
-+
-+/* pfe_eth_open
-+ */
-+static int pfe_eth_open(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	struct hif_client_s *client;
-+	int rc;
-+
-+	netif_info(priv, ifup, ndev, "%s\n", __func__);
-+
-+	/* Register client driver with HIF */
-+	client = &priv->client;
-+	memset(client, 0, sizeof(*client));
-+	client->id = PFE_CL_GEM0 + priv->id;
-+	client->tx_qn = emac_txq_cnt;
-+	client->rx_qn = EMAC_RXQ_CNT;
-+	client->priv = priv;
-+	client->pfe = priv->pfe;
-+	client->event_handler = pfe_eth_event_handler;
-+
-+	client->tx_qsize = EMAC_TXQ_DEPTH;
-+	client->rx_qsize = EMAC_RXQ_DEPTH;
-+
-+	rc = hif_lib_client_register(client);
-+	if (rc) {
-+		netdev_err(ndev, "%s: hif_lib_client_register(%d) failed\n",
-+			   __func__, client->id);
-+		goto err0;
-+	}
-+
-+	netif_info(priv, drv, ndev, "%s: registered client: %p\n", __func__,
-+		   client);
-+
-+	pfe_gemac_init(priv);
-+
-+	if (!is_valid_ether_addr(ndev->dev_addr)) {
-+		netdev_err(ndev, "%s: invalid MAC address\n", __func__);
-+		rc = -EADDRNOTAVAIL;
-+		goto err1;
-+	}
-+
-+	gemac_set_laddrN(priv->EMAC_baseaddr,
-+			 (struct pfe_mac_addr *)ndev->dev_addr, 1);
-+
-+	napi_enable(&priv->high_napi);
-+	napi_enable(&priv->low_napi);
-+	napi_enable(&priv->lro_napi);
-+
-+	rc = pfe_eth_start(priv);
-+
-+	netif_tx_wake_all_queues(ndev);
-+
-+	return rc;
-+
-+err1:
-+	hif_lib_client_unregister(&priv->client);
-+
-+err0:
-+	return rc;
-+}
-+
-+/*
-+ *  pfe_eth_shutdown
-+ */
-+int pfe_eth_shutdown(struct net_device *ndev, int wake)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	int i, qstatus, id;
-+	unsigned long next_poll = jiffies + 1, end = jiffies +
-+				(TX_POLL_TIMEOUT_MS * HZ) / 1000;
-+	int tx_pkts, prv_tx_pkts;
-+
-+	netif_info(priv, ifdown, ndev, "%s\n", __func__);
-+
-+	for (i = 0; i < emac_txq_cnt; i++)
-+		hrtimer_cancel(&priv->fast_tx_timeout[i].timer);
-+
-+	netif_tx_stop_all_queues(ndev);
-+
-+	do {
-+		tx_pkts = 0;
-+		pfe_eth_flush_tx(priv);
-+
-+		for (i = 0; i < emac_txq_cnt; i++)
-+			tx_pkts += hif_lib_tx_pending(&priv->client, i);
-+
-+		if (tx_pkts) {
-+			/*Don't wait forever, break if we cross max timeout */
-+			if (time_after(jiffies, end)) {
-+				pr_err(
-+					"(%s)Tx is not complete after %dmsec\n",
-+					ndev->name, TX_POLL_TIMEOUT_MS);
-+				break;
-+			}
-+
-+			pr_info("%s : (%s) Waiting for tx packets to free. Pending tx pkts = %d.\n"
-+				, __func__, ndev->name, tx_pkts);
-+			if (need_resched())
-+				schedule();
-+		}
-+
-+	} while (tx_pkts);
-+
-+	end = jiffies + (TX_POLL_TIMEOUT_MS * HZ) / 1000;
-+
-+	prv_tx_pkts = tmu_pkts_processed(priv->id);
-+	/*
-+	 * Wait till TMU transmits all pending packets
-+	 * poll tmu_qstatus and pkts processed by TMU for every 10ms
-+	 * Consider TMU is busy, If we see TMU qeueu pending or any packets
-+	 * processed by TMU
-+	 */
-+	while (1) {
-+		if (time_after(jiffies, next_poll)) {
-+			tx_pkts = tmu_pkts_processed(priv->id);
-+			qstatus = tmu_qstatus(priv->id) & 0x7ffff;
-+
-+			if (!qstatus && (tx_pkts == prv_tx_pkts))
-+				break;
-+			/* Don't wait forever, break if we cross max
-+			 * timeout(TX_POLL_TIMEOUT_MS)
-+			 */
-+			if (time_after(jiffies, end)) {
-+				pr_err("TMU%d is busy after %dmsec\n",
-+				       priv->id, TX_POLL_TIMEOUT_MS);
-+				break;
-+			}
-+			prv_tx_pkts = tx_pkts;
-+			next_poll++;
-+		}
-+		if (need_resched())
-+			schedule();
-+	}
-+	/* Wait for some more time to complete transmitting packet if any */
-+	next_poll = jiffies + 1;
-+	while (1) {
-+		if (time_after(jiffies, next_poll))
-+			break;
-+		if (need_resched())
-+			schedule();
-+	}
-+
-+	pfe_eth_stop(ndev, wake);
-+
-+	napi_disable(&priv->lro_napi);
-+	napi_disable(&priv->low_napi);
-+	napi_disable(&priv->high_napi);
-+
-+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
-+		pe_dmem_write(id, 0, CLASS_DM_CRC_VALIDATED
-+			      + (priv->id * 4), 4);
-+	}
-+
-+	hif_lib_client_unregister(&priv->client);
-+
-+	return 0;
-+}
-+
-+/* pfe_eth_close
-+ *
-+ */
-+static int pfe_eth_close(struct net_device *ndev)
-+{
-+	pfe_eth_shutdown(ndev, 0);
-+
-+	return 0;
-+}
-+
-+/* pfe_eth_suspend
-+ *
-+ * return value : 1 if netdevice is configured to wakeup system
-+ *                0 otherwise
-+ */
-+int pfe_eth_suspend(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	int retval = 0;
-+
-+	if (priv->wol) {
-+		gemac_set_wol(priv->EMAC_baseaddr, priv->wol);
-+		retval = 1;
-+	}
-+	pfe_eth_shutdown(ndev, priv->wol);
-+
-+	return retval;
-+}
-+
-+/* pfe_eth_resume
-+ *
-+ */
-+int pfe_eth_resume(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	if (priv->wol)
-+		gemac_set_wol(priv->EMAC_baseaddr, 0);
-+	gemac_tx_enable(priv->EMAC_baseaddr);
-+
-+	return pfe_eth_open(ndev);
-+}
-+
-+/* pfe_eth_get_queuenum
-+ */
-+static int pfe_eth_get_queuenum(struct pfe_eth_priv_s *priv, struct sk_buff
-+					*skb)
-+{
-+	int queuenum = 0;
-+	unsigned long flags;
-+
-+	/* Get the Fast Path queue number */
-+	/*
-+	 * Use conntrack mark (if conntrack exists), then packet mark (if any),
-+	 * then fallback to default
-+	 */
-+#if defined(CONFIG_IP_NF_CONNTRACK_MARK) || defined(CONFIG_NF_CONNTRACK_MARK)
-+	if (skb->_nfct) {
-+		enum ip_conntrack_info cinfo;
-+		struct nf_conn *ct;
-+
-+		ct = nf_ct_get(skb, &cinfo);
-+
-+		if (ct) {
-+			u32 connmark;
-+
-+			connmark = ct->mark;
-+
-+			if ((connmark & 0x80000000) && priv->id != 0)
-+				connmark >>= 16;
-+
-+			queuenum = connmark & EMAC_QUEUENUM_MASK;
-+		}
-+	} else  {/* continued after #endif ... */
-+#endif
-+		if (skb->mark) {
-+			queuenum = skb->mark & EMAC_QUEUENUM_MASK;
-+		} else {
-+			spin_lock_irqsave(&priv->lock, flags);
-+			queuenum = priv->default_priority & EMAC_QUEUENUM_MASK;
-+			spin_unlock_irqrestore(&priv->lock, flags);
-+		}
-+#if defined(CONFIG_IP_NF_CONNTRACK_MARK) || defined(CONFIG_NF_CONNTRACK_MARK)
-+	}
-+#endif
-+	return queuenum;
-+}
-+
-+/* pfe_eth_might_stop_tx
-+ *
-+ */
-+static int pfe_eth_might_stop_tx(struct pfe_eth_priv_s *priv, int queuenum,
-+				 struct netdev_queue *tx_queue,
-+				 unsigned int n_desc,
-+				 unsigned int n_segs)
-+{
-+	ktime_t kt;
-+	int tried = 0;
-+
-+try_again:
-+	if (unlikely((__hif_tx_avail(&pfe->hif) < n_desc) ||
-+	(hif_lib_tx_avail(&priv->client, queuenum) < n_desc) ||
-+	(hif_lib_tx_credit_avail(pfe, priv->id, queuenum) < n_segs))) {
-+		if (!tried) {
-+			__hif_lib_update_credit(&priv->client, queuenum);
-+			tried = 1;
-+			goto try_again;
-+		}
-+#ifdef PFE_ETH_TX_STATS
-+		if (__hif_tx_avail(&pfe->hif) < n_desc) {
-+			priv->stop_queue_hif[queuenum]++;
-+		} else if (hif_lib_tx_avail(&priv->client, queuenum) < n_desc) {
-+			priv->stop_queue_hif_client[queuenum]++;
-+		} else if (hif_lib_tx_credit_avail(pfe, priv->id, queuenum) <
-+			n_segs) {
-+			priv->stop_queue_credit[queuenum]++;
-+		}
-+		priv->stop_queue_total[queuenum]++;
-+#endif
-+		netif_tx_stop_queue(tx_queue);
-+
-+		kt = ktime_set(0, LS1012A_TX_FAST_RECOVERY_TIMEOUT_MS *
-+				NSEC_PER_MSEC);
-+		hrtimer_start(&priv->fast_tx_timeout[queuenum].timer, kt,
-+			      HRTIMER_MODE_REL);
-+		return -1;
-+	} else {
-+		return 0;
-+	}
-+}
-+
-+#define SA_MAX_OP 2
-+/* pfe_hif_send_packet
-+ *
-+ * At this level if TX fails we drop the packet
-+ */
-+static void pfe_hif_send_packet(struct sk_buff *skb, struct  pfe_eth_priv_s
-+					*priv, int queuenum)
-+{
-+	struct skb_shared_info *sh = skb_shinfo(skb);
-+	unsigned int nr_frags;
-+	u32 ctrl = 0;
-+
-+	netif_info(priv, tx_queued, priv->ndev, "%s\n", __func__);
-+
-+	if (skb_is_gso(skb)) {
-+		priv->stats.tx_dropped++;
-+		return;
-+	}
-+
-+	if (skb->ip_summed == CHECKSUM_PARTIAL)
-+		ctrl = HIF_CTRL_TX_CHECKSUM;
-+
-+	nr_frags = sh->nr_frags;
-+
-+	if (nr_frags) {
-+		skb_frag_t *f;
-+		int i;
-+
-+		__hif_lib_xmit_pkt(&priv->client, queuenum, skb->data,
-+				   skb_headlen(skb), ctrl, HIF_FIRST_BUFFER,
-+				   skb);
-+
-+		for (i = 0; i < nr_frags - 1; i++) {
-+			f = &sh->frags[i];
-+			__hif_lib_xmit_pkt(&priv->client, queuenum,
-+					   skb_frag_address(f),
-+					   skb_frag_size(f),
-+					   0x0, 0x0, skb);
-+		}
-+
-+		f = &sh->frags[i];
-+
-+		__hif_lib_xmit_pkt(&priv->client, queuenum,
-+				   skb_frag_address(f), skb_frag_size(f),
-+				   0x0, HIF_LAST_BUFFER | HIF_DATA_VALID,
-+				   skb);
-+
-+		netif_info(priv, tx_queued, priv->ndev,
-+			   "%s: pkt sent successfully skb:%p nr_frags:%d len:%d\n",
-+			   __func__, skb, nr_frags, skb->len);
-+	} else {
-+		__hif_lib_xmit_pkt(&priv->client, queuenum, skb->data,
-+				   skb->len, ctrl, HIF_FIRST_BUFFER |
-+				   HIF_LAST_BUFFER | HIF_DATA_VALID,
-+				   skb);
-+		netif_info(priv, tx_queued, priv->ndev,
-+			   "%s: pkt sent successfully skb:%p len:%d\n",
-+			   __func__, skb, skb->len);
-+	}
-+	hif_tx_dma_start();
-+	priv->stats.tx_packets++;
-+	priv->stats.tx_bytes += skb->len;
-+	hif_lib_tx_credit_use(pfe, priv->id, queuenum, 1);
-+}
-+
-+/* pfe_eth_flush_txQ
-+ */
-+static void pfe_eth_flush_txQ(struct pfe_eth_priv_s *priv, int tx_q_num, int
-+				from_tx, int n_desc)
-+{
-+	struct sk_buff *skb;
-+	struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
-+								tx_q_num);
-+	unsigned int flags;
-+
-+	netif_info(priv, tx_done, priv->ndev, "%s\n", __func__);
-+
-+	if (!from_tx)
-+		__netif_tx_lock_bh(tx_queue);
-+
-+	/* Clean HIF and client queue */
-+	while ((skb = hif_lib_tx_get_next_complete(&priv->client,
-+						   tx_q_num, &flags,
-+						   HIF_TX_DESC_NT))) {
-+		if (flags & HIF_DATA_VALID)
-+			dev_kfree_skb_any(skb);
-+	}
-+	if (!from_tx)
-+		__netif_tx_unlock_bh(tx_queue);
-+}
-+
-+/* pfe_eth_flush_tx
-+ */
-+static void pfe_eth_flush_tx(struct pfe_eth_priv_s *priv)
-+{
-+	int ii;
-+
-+	netif_info(priv, tx_done, priv->ndev, "%s\n", __func__);
-+
-+	for (ii = 0; ii < emac_txq_cnt; ii++) {
-+		pfe_eth_flush_txQ(priv, ii, 0, 0);
-+		__hif_lib_update_credit(&priv->client, ii);
-+	}
-+}
-+
-+void pfe_tx_get_req_desc(struct sk_buff *skb, unsigned int *n_desc, unsigned int
-+				*n_segs)
-+{
-+	struct skb_shared_info *sh = skb_shinfo(skb);
-+
-+	/* Scattered data */
-+	if (sh->nr_frags) {
-+		*n_desc = sh->nr_frags + 1;
-+		*n_segs = 1;
-+	/* Regular case */
-+	} else {
-+		*n_desc = 1;
-+		*n_segs = 1;
-+	}
-+}
-+
-+/* pfe_eth_send_packet
-+ */
-+static int pfe_eth_send_packet(struct sk_buff *skb, struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	int tx_q_num = skb_get_queue_mapping(skb);
-+	int n_desc, n_segs;
-+	struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
-+								tx_q_num);
-+
-+	netif_info(priv, tx_queued, ndev, "%s\n", __func__);
-+
-+	if ((!skb_is_gso(skb)) && (skb_headroom(skb) < (PFE_PKT_HEADER_SZ +
-+			sizeof(unsigned long)))) {
-+		netif_warn(priv, tx_err, priv->ndev, "%s: copying skb\n",
-+			   __func__);
-+
-+		if (pskb_expand_head(skb, (PFE_PKT_HEADER_SZ + sizeof(unsigned
-+					long)), 0, GFP_ATOMIC)) {
-+			/* No need to re-transmit, no way to recover*/
-+			kfree_skb(skb);
-+			priv->stats.tx_dropped++;
-+			return NETDEV_TX_OK;
-+		}
-+	}
-+
-+	pfe_tx_get_req_desc(skb, &n_desc, &n_segs);
-+
-+	hif_tx_lock(&pfe->hif);
-+	if (unlikely(pfe_eth_might_stop_tx(priv, tx_q_num, tx_queue, n_desc,
-+					   n_segs))) {
-+#ifdef PFE_ETH_TX_STATS
-+		if (priv->was_stopped[tx_q_num]) {
-+			priv->clean_fail[tx_q_num]++;
-+			priv->was_stopped[tx_q_num] = 0;
-+		}
-+#endif
-+		hif_tx_unlock(&pfe->hif);
-+		return NETDEV_TX_BUSY;
-+	}
-+
-+	pfe_hif_send_packet(skb, priv, tx_q_num);
-+
-+	hif_tx_unlock(&pfe->hif);
-+
-+	tx_queue->trans_start = jiffies;
-+
-+#ifdef PFE_ETH_TX_STATS
-+	priv->was_stopped[tx_q_num] = 0;
-+#endif
-+
-+	return NETDEV_TX_OK;
-+}
-+
-+/* pfe_eth_select_queue
-+ *
-+ */
-+static u16 pfe_eth_select_queue(struct net_device *ndev, struct sk_buff *skb,
-+				struct net_device *sb_dev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	return pfe_eth_get_queuenum(priv, skb);
-+}
-+
-+/* pfe_eth_get_stats
-+ */
-+static struct net_device_stats *pfe_eth_get_stats(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+
-+	netif_info(priv, drv, ndev, "%s\n", __func__);
-+
-+	return &priv->stats;
-+}
-+
-+/* pfe_eth_set_mac_address
-+ */
-+static int pfe_eth_set_mac_address(struct net_device *ndev, void *addr)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	struct sockaddr *sa = addr;
-+
-+	netif_info(priv, drv, ndev, "%s\n", __func__);
-+
-+	if (!is_valid_ether_addr(sa->sa_data))
-+		return -EADDRNOTAVAIL;
-+
-+	memcpy(ndev->dev_addr, sa->sa_data, ETH_ALEN);
-+
-+	gemac_set_laddrN(priv->EMAC_baseaddr,
-+			 (struct pfe_mac_addr *)ndev->dev_addr, 1);
-+
-+	return 0;
-+}
-+
-+/* pfe_eth_enet_addr_byte_mac
-+ */
-+int pfe_eth_enet_addr_byte_mac(u8 *enet_byte_addr,
-+			       struct pfe_mac_addr *enet_addr)
-+{
-+	if (!enet_byte_addr || !enet_addr) {
-+		return -1;
-+
-+	} else {
-+		enet_addr->bottom = enet_byte_addr[0] |
-+			(enet_byte_addr[1] << 8) |
-+			(enet_byte_addr[2] << 16) |
-+			(enet_byte_addr[3] << 24);
-+		enet_addr->top = enet_byte_addr[4] |
-+			(enet_byte_addr[5] << 8);
-+		return 0;
-+	}
-+}
-+
-+/* pfe_eth_set_multi
-+ */
-+static void pfe_eth_set_multi(struct net_device *ndev)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	struct pfe_mac_addr    hash_addr; /* hash register structure */
-+	/* specific mac address	register structure */
-+	struct pfe_mac_addr    spec_addr;
-+	int		result; /* index into hash register to set.. */
-+	int		uc_count = 0;
-+	struct netdev_hw_addr *ha;
-+
-+	if (ndev->flags & IFF_PROMISC) {
-+		netif_info(priv, drv, ndev, "entering promiscuous mode\n");
-+
-+		priv->promisc = 1;
-+		gemac_enable_copy_all(priv->EMAC_baseaddr);
-+	} else {
-+		priv->promisc = 0;
-+		gemac_disable_copy_all(priv->EMAC_baseaddr);
-+	}
-+
-+	/* Enable broadcast frame reception if required. */
-+	if (ndev->flags & IFF_BROADCAST) {
-+		gemac_allow_broadcast(priv->EMAC_baseaddr);
-+	} else {
-+		netif_info(priv, drv, ndev,
-+			   "disabling broadcast frame reception\n");
-+
-+		gemac_no_broadcast(priv->EMAC_baseaddr);
-+	}
-+
-+	if (ndev->flags & IFF_ALLMULTI) {
-+		/* Set the hash to rx all multicast frames */
-+		hash_addr.bottom = 0xFFFFFFFF;
-+		hash_addr.top = 0xFFFFFFFF;
-+		gemac_set_hash(priv->EMAC_baseaddr, &hash_addr);
-+		netdev_for_each_uc_addr(ha, ndev) {
-+			if (uc_count >= MAX_UC_SPEC_ADDR_REG)
-+				break;
-+			pfe_eth_enet_addr_byte_mac(ha->addr, &spec_addr);
-+			gemac_set_laddrN(priv->EMAC_baseaddr, &spec_addr,
-+					 uc_count + 2);
-+			uc_count++;
-+		}
-+	} else if ((netdev_mc_count(ndev) > 0)  || (netdev_uc_count(ndev))) {
-+		u8 *addr;
-+
-+		hash_addr.bottom = 0;
-+		hash_addr.top = 0;
-+
-+		netdev_for_each_mc_addr(ha, ndev) {
-+			addr = ha->addr;
-+
-+			netif_info(priv, drv, ndev,
-+				   "adding multicast address %X:%X:%X:%X:%X:%X to gem filter\n",
-+				addr[0], addr[1], addr[2],
-+				addr[3], addr[4], addr[5]);
-+
-+			result = pfe_eth_get_hash(addr);
-+
-+			if (result < EMAC_HASH_REG_BITS) {
-+				if (result < 32)
-+					hash_addr.bottom |= (1 << result);
-+				else
-+					hash_addr.top |= (1 << (result - 32));
-+			} else {
-+				break;
-+			}
-+		}
-+
-+		uc_count = -1;
-+		netdev_for_each_uc_addr(ha, ndev) {
-+			addr = ha->addr;
-+
-+			if (++uc_count < MAX_UC_SPEC_ADDR_REG)   {
-+				netdev_info(ndev,
-+					    "adding unicast address %02x:%02x:%02x:%02x:%02x:%02x to gem filter\n",
-+					    addr[0], addr[1], addr[2],
-+					    addr[3], addr[4], addr[5]);
-+				pfe_eth_enet_addr_byte_mac(addr, &spec_addr);
-+				gemac_set_laddrN(priv->EMAC_baseaddr,
-+						 &spec_addr, uc_count + 2);
-+			} else {
-+				netif_info(priv, drv, ndev,
-+					   "adding unicast address %02x:%02x:%02x:%02x:%02x:%02x to gem hash\n",
-+					   addr[0], addr[1], addr[2],
-+					   addr[3], addr[4], addr[5]);
-+
-+				result = pfe_eth_get_hash(addr);
-+				if (result >= EMAC_HASH_REG_BITS) {
-+					break;
-+
-+				} else {
-+					if (result < 32)
-+						hash_addr.bottom |= (1 <<
-+								result);
-+					else
-+						hash_addr.top |= (1 <<
-+								(result - 32));
-+				}
-+			}
-+		}
-+
-+		gemac_set_hash(priv->EMAC_baseaddr, &hash_addr);
-+	}
-+
-+	if (!(netdev_uc_count(ndev) >= MAX_UC_SPEC_ADDR_REG)) {
-+		/*
-+		 *  Check if there are any specific address HW registers that
-+		 * need to be flushed
-+		 */
-+		for (uc_count = netdev_uc_count(ndev); uc_count <
-+			MAX_UC_SPEC_ADDR_REG; uc_count++)
-+			gemac_clear_laddrN(priv->EMAC_baseaddr, uc_count + 2);
-+	}
-+
-+	if (ndev->flags & IFF_LOOPBACK)
-+		gemac_set_loop(priv->EMAC_baseaddr, LB_LOCAL);
-+}
-+
-+/* pfe_eth_set_features
-+ */
-+static int pfe_eth_set_features(struct net_device *ndev, netdev_features_t
-+					features)
-+{
-+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
-+	int rc = 0;
-+
-+	if (features & NETIF_F_RXCSUM)
-+		gemac_enable_rx_checksum_offload(priv->EMAC_baseaddr);
-+	else
-+		gemac_disable_rx_checksum_offload(priv->EMAC_baseaddr);
-+	return rc;
-+}
-+
-+/* pfe_eth_fast_tx_timeout
-+ */
-+static enum hrtimer_restart pfe_eth_fast_tx_timeout(struct hrtimer *timer)
-+{
-+	struct pfe_eth_fast_timer *fast_tx_timeout = container_of(timer, struct
-+							pfe_eth_fast_timer,
-+							timer);
-+	struct pfe_eth_priv_s *priv =  container_of(fast_tx_timeout->base,
-+							struct pfe_eth_priv_s,
-+							fast_tx_timeout);
-+	struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
-+						fast_tx_timeout->queuenum);
-+
-+	if (netif_tx_queue_stopped(tx_queue)) {
-+#ifdef PFE_ETH_TX_STATS
-+		priv->was_stopped[fast_tx_timeout->queuenum] = 1;
-+#endif
-+		netif_tx_wake_queue(tx_queue);
-+	}
-+
-+	return HRTIMER_NORESTART;
-+}
-+
-+/* pfe_eth_fast_tx_timeout_init
-+ */
-+static void pfe_eth_fast_tx_timeout_init(struct pfe_eth_priv_s *priv)
-+{
-+	int i;
-+
-+	for (i = 0; i < emac_txq_cnt; i++) {
-+		priv->fast_tx_timeout[i].queuenum = i;
-+		hrtimer_init(&priv->fast_tx_timeout[i].timer, CLOCK_MONOTONIC,
-+			     HRTIMER_MODE_REL);
-+		priv->fast_tx_timeout[i].timer.function =
-+				pfe_eth_fast_tx_timeout;
-+		priv->fast_tx_timeout[i].base = priv->fast_tx_timeout;
-+	}
-+}
-+
-+static struct sk_buff *pfe_eth_rx_skb(struct net_device *ndev,
-+				      struct	pfe_eth_priv_s *priv,
-+				      unsigned int qno)
-+{
-+	void *buf_addr;
-+	unsigned int rx_ctrl;
-+	unsigned int desc_ctrl = 0;
-+	struct hif_ipsec_hdr *ipsec_hdr = NULL;
-+	struct sk_buff *skb;
-+	struct sk_buff *skb_frag, *skb_frag_last = NULL;
-+	int length = 0, offset;
-+
-+	skb = priv->skb_inflight[qno];
-+
-+	if (skb) {
-+		skb_frag_last = skb_shinfo(skb)->frag_list;
-+		if (skb_frag_last) {
-+			while (skb_frag_last->next)
-+				skb_frag_last = skb_frag_last->next;
-+		}
-+	}
-+
-+	while (!(desc_ctrl & CL_DESC_LAST)) {
-+		buf_addr = hif_lib_receive_pkt(&priv->client, qno, &length,
-+					       &offset, &rx_ctrl, &desc_ctrl,
-+					       (void **)&ipsec_hdr);
-+		if (!buf_addr)
-+			goto incomplete;
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+		priv->napi_counters[NAPI_DESC_COUNT]++;
-+#endif
-+
-+		/* First frag */
-+		if (desc_ctrl & CL_DESC_FIRST) {
-+			skb = build_skb(buf_addr, 0);
-+			if (unlikely(!skb))
-+				goto pkt_drop;
-+
-+			skb_reserve(skb, offset);
-+			skb_put(skb, length);
-+			skb->dev = ndev;
-+
-+			if ((ndev->features & NETIF_F_RXCSUM) && (rx_ctrl &
-+					HIF_CTRL_RX_CHECKSUMMED))
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+			else
-+				skb_checksum_none_assert(skb);
-+
-+		} else {
-+			/* Next frags */
-+			if (unlikely(!skb)) {
-+				pr_err("%s: NULL skb_inflight\n",
-+				       __func__);
-+				goto pkt_drop;
-+			}
-+
-+			skb_frag = build_skb(buf_addr, 0);
-+
-+			if (unlikely(!skb_frag)) {
-+				kfree(buf_addr);
-+				goto pkt_drop;
-+			}
-+
-+			skb_reserve(skb_frag, offset);
-+			skb_put(skb_frag, length);
-+
-+			skb_frag->dev = ndev;
-+
-+			if (skb_shinfo(skb)->frag_list)
-+				skb_frag_last->next = skb_frag;
-+			else
-+				skb_shinfo(skb)->frag_list = skb_frag;
-+
-+			skb->truesize += skb_frag->truesize;
-+			skb->data_len += length;
-+			skb->len += length;
-+			skb_frag_last = skb_frag;
-+		}
-+	}
-+
-+	priv->skb_inflight[qno] = NULL;
-+	return skb;
-+
-+incomplete:
-+	priv->skb_inflight[qno] = skb;
-+	return NULL;
-+
-+pkt_drop:
-+	priv->skb_inflight[qno] = NULL;
-+
-+	if (skb)
-+		kfree_skb(skb);
-+	else
-+		kfree(buf_addr);
-+
-+	priv->stats.rx_errors++;
-+
-+	return NULL;
-+}
-+
-+/* pfe_eth_poll
-+ */
-+static int pfe_eth_poll(struct pfe_eth_priv_s *priv, struct napi_struct *napi,
-+			unsigned int qno, int budget)
-+{
-+	struct net_device *ndev = priv->ndev;
-+	struct sk_buff *skb;
-+	int work_done = 0;
-+	unsigned int len;
-+
-+	netif_info(priv, intr, priv->ndev, "%s\n", __func__);
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+	priv->napi_counters[NAPI_POLL_COUNT]++;
-+#endif
-+
-+	do {
-+		skb = pfe_eth_rx_skb(ndev, priv, qno);
-+
-+		if (!skb)
-+			break;
-+
-+		len = skb->len;
-+
-+		/* Packet will be processed */
-+		skb->protocol = eth_type_trans(skb, ndev);
-+
-+		netif_receive_skb(skb);
-+
-+		priv->stats.rx_packets++;
-+		priv->stats.rx_bytes += len;
-+
-+		work_done++;
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+		priv->napi_counters[NAPI_PACKET_COUNT]++;
-+#endif
-+
-+	} while (work_done < budget);
-+
-+	/*
-+	 * If no Rx receive nor cleanup work was done, exit polling mode.
-+	 * No more netif_running(dev) check is required here , as this is
-+	 * checked in net/core/dev.c (2.6.33.5 kernel specific).
-+	 */
-+	if (work_done < budget) {
-+		napi_complete(napi);
-+
-+		hif_lib_event_handler_start(&priv->client, EVENT_RX_PKT_IND,
-+					    qno);
-+	}
-+#ifdef PFE_ETH_NAPI_STATS
-+	else
-+		priv->napi_counters[NAPI_FULL_BUDGET_COUNT]++;
-+#endif
-+
-+	return work_done;
-+}
-+
-+/*
-+ * pfe_eth_lro_poll
-+ */
-+static int pfe_eth_lro_poll(struct napi_struct *napi, int budget)
-+{
-+	struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s,
-+							lro_napi);
-+
-+	netif_info(priv, intr, priv->ndev, "%s\n", __func__);
-+
-+	return pfe_eth_poll(priv, napi, 2, budget);
-+}
-+
-+/* pfe_eth_low_poll
-+ */
-+static int pfe_eth_low_poll(struct napi_struct *napi, int budget)
-+{
-+	struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s,
-+							low_napi);
-+
-+	netif_info(priv, intr, priv->ndev, "%s\n", __func__);
-+
-+	return pfe_eth_poll(priv, napi, 1, budget);
-+}
-+
-+/* pfe_eth_high_poll
-+ */
-+static int pfe_eth_high_poll(struct napi_struct *napi, int budget)
-+{
-+	struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s,
-+							high_napi);
-+
-+	netif_info(priv, intr, priv->ndev, "%s\n", __func__);
-+
-+	return pfe_eth_poll(priv, napi, 0, budget);
-+}
-+
-+static const struct net_device_ops pfe_netdev_ops = {
-+	.ndo_open = pfe_eth_open,
-+	.ndo_stop = pfe_eth_close,
-+	.ndo_start_xmit = pfe_eth_send_packet,
-+	.ndo_select_queue = pfe_eth_select_queue,
-+	.ndo_set_rx_mode = pfe_eth_set_multi,
-+	.ndo_set_mac_address = pfe_eth_set_mac_address,
-+	.ndo_validate_addr = eth_validate_addr,
-+	.ndo_change_mtu = pfe_eth_change_mtu,
-+	.ndo_get_stats = pfe_eth_get_stats,
-+	.ndo_set_features = pfe_eth_set_features,
-+};
-+
-+/* pfe_eth_init_one
-+ */
-+static int pfe_eth_init_one(struct pfe *pfe,
-+			    struct ls1012a_pfe_platform_data *pfe_info,
-+			    int id)
-+{
-+	struct net_device *ndev = NULL;
-+	struct pfe_eth_priv_s *priv = NULL;
-+	struct ls1012a_eth_platform_data *einfo;
-+	int err;
-+
-+	einfo = (struct ls1012a_eth_platform_data *)
-+				pfe_info->ls1012a_eth_pdata;
-+
-+	/* einfo never be NULL, but no harm in having this check */
-+	if (!einfo) {
-+		pr_err(
-+			"%s: pfe missing additional gemacs platform data\n"
-+			, __func__);
-+		err = -ENODEV;
-+		goto err0;
-+	}
-+
-+	if (us)
-+		emac_txq_cnt = EMAC_TXQ_CNT;
-+	/* Create an ethernet device instance */
-+	ndev = alloc_etherdev_mq(sizeof(*priv), emac_txq_cnt);
-+
-+	if (!ndev) {
-+		pr_err("%s: gemac %d device allocation failed\n",
-+		       __func__, einfo[id].gem_id);
-+		err = -ENOMEM;
-+		goto err0;
-+	}
-+
-+	priv = netdev_priv(ndev);
-+	priv->ndev = ndev;
-+	priv->id = einfo[id].gem_id;
-+	priv->pfe = pfe;
-+	priv->phy_node = einfo[id].phy_node;
-+
-+	SET_NETDEV_DEV(priv->ndev, priv->pfe->dev);
-+
-+	pfe->eth.eth_priv[id] = priv;
-+
-+	/* Set the info in the priv to the current info */
-+	priv->einfo = &einfo[id];
-+	priv->EMAC_baseaddr = cbus_emac_base[id];
-+	priv->GPI_baseaddr = cbus_gpi_base[id];
-+
-+	spin_lock_init(&priv->lock);
-+
-+	pfe_eth_fast_tx_timeout_init(priv);
-+
-+	/* Copy the station address into the dev structure, */
-+	memcpy(ndev->dev_addr, einfo[id].mac_addr, ETH_ALEN);
-+
-+	if (us)
-+		goto phy_init;
-+
-+	ndev->mtu = 1500;
-+
-+	/* Set MTU limits */
-+	ndev->min_mtu = ETH_MIN_MTU;
-+
-+/*
-+ * Jumbo frames are not supported on LS1012A rev-1.0.
-+ * So max mtu should be restricted to supported frame length.
-+ */
-+	if (pfe_errata_a010897)
-+		ndev->max_mtu = JUMBO_FRAME_SIZE_V1 - ETH_HLEN - ETH_FCS_LEN;
-+	else
-+		ndev->max_mtu = JUMBO_FRAME_SIZE_V2 - ETH_HLEN - ETH_FCS_LEN;
-+
-+	/*Enable after checksum offload is validated */
-+	ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM |
-+		NETIF_F_IPV6_CSUM | NETIF_F_SG;
-+
-+	/* enabled by default */
-+	ndev->features = ndev->hw_features;
-+
-+	priv->usr_features = ndev->features;
-+
-+	ndev->netdev_ops = &pfe_netdev_ops;
-+
-+	ndev->ethtool_ops = &pfe_ethtool_ops;
-+
-+	/* Enable basic messages by default */
-+	priv->msg_enable = NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK |
-+				NETIF_MSG_PROBE;
-+
-+	netif_napi_add(ndev, &priv->low_napi, pfe_eth_low_poll,
-+		       HIF_RX_POLL_WEIGHT - 16);
-+	netif_napi_add(ndev, &priv->high_napi, pfe_eth_high_poll,
-+		       HIF_RX_POLL_WEIGHT - 16);
-+	netif_napi_add(ndev, &priv->lro_napi, pfe_eth_lro_poll,
-+		       HIF_RX_POLL_WEIGHT - 16);
-+
-+	err = register_netdev(ndev);
-+	if (err) {
-+		netdev_err(ndev, "register_netdev() failed\n");
-+		goto err1;
-+	}
-+
-+	if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) ||
-+	    ((pfe_use_old_dts_phy) &&
-+	      (priv->einfo->phy_flags & GEMAC_NO_PHY))) {
-+		pr_info("%s: No PHY or fixed-link\n", __func__);
-+		goto skip_phy_init;
-+	}
-+
-+phy_init:
-+	device_init_wakeup(&ndev->dev, WAKE_MAGIC);
-+
-+	err = pfe_phy_init(ndev);
-+	if (err) {
-+		netdev_err(ndev, "%s: pfe_phy_init() failed\n",
-+			   __func__);
-+		goto err2;
-+	}
-+
-+	if (us) {
-+		if (priv->phydev)
-+			phy_start(priv->phydev);
-+		return 0;
-+	}
-+
-+	netif_carrier_on(ndev);
-+
-+skip_phy_init:
-+	/* Create all the sysfs files */
-+	if (pfe_eth_sysfs_init(ndev))
-+		goto err3;
-+
-+	netif_info(priv, probe, ndev, "%s: created interface, baseaddr: %p\n",
-+		   __func__, priv->EMAC_baseaddr);
-+
-+	return 0;
-+
-+err3:
-+	pfe_phy_exit(priv->ndev);
-+err2:
-+	if (us)
-+		goto err1;
-+	unregister_netdev(ndev);
-+err1:
-+	free_netdev(priv->ndev);
-+err0:
-+	return err;
-+}
-+
-+/* pfe_eth_init
-+ */
-+int pfe_eth_init(struct pfe *pfe)
-+{
-+	int ii = 0;
-+	int err;
-+	struct ls1012a_pfe_platform_data *pfe_info;
-+
-+	pr_info("%s\n", __func__);
-+
-+	cbus_emac_base[0] = EMAC1_BASE_ADDR;
-+	cbus_emac_base[1] = EMAC2_BASE_ADDR;
-+
-+	cbus_gpi_base[0] = EGPI1_BASE_ADDR;
-+	cbus_gpi_base[1] = EGPI2_BASE_ADDR;
-+
-+	pfe_info = (struct ls1012a_pfe_platform_data *)
-+					pfe->dev->platform_data;
-+	if (!pfe_info) {
-+		pr_err("%s: pfe missing additional platform data\n", __func__);
-+		err = -ENODEV;
-+		goto err_pdata;
-+	}
-+
-+	for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
-+		err = pfe_eth_mdio_init(pfe, pfe_info, ii);
-+		if (err) {
-+			pr_err("%s: pfe_eth_mdio_init() failed\n", __func__);
-+			goto err_mdio_init;
-+		}
-+	}
-+
-+	if (soc_device_match(ls1012a_rev1_soc_attr))
-+		pfe_errata_a010897 = true;
-+	else
-+		pfe_errata_a010897 = false;
-+
-+	for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
-+		err = pfe_eth_init_one(pfe, pfe_info, ii);
-+		if (err)
-+			goto err_eth_init;
-+	}
-+
-+	return 0;
-+
-+err_eth_init:
-+	while (ii--) {
-+		pfe_eth_exit_one(pfe->eth.eth_priv[ii]);
-+		pfe_eth_mdio_exit(pfe, ii);
-+	}
-+
-+err_mdio_init:
-+err_pdata:
-+	return err;
-+}
-+
-+/* pfe_eth_exit_one
-+ */
-+static void pfe_eth_exit_one(struct pfe_eth_priv_s *priv)
-+{
-+	netif_info(priv, probe, priv->ndev, "%s\n", __func__);
-+
-+	if (!us)
-+		pfe_eth_sysfs_exit(priv->ndev);
-+
-+	if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) ||
-+	    ((pfe_use_old_dts_phy) &&
-+	      (priv->einfo->phy_flags & GEMAC_NO_PHY))) {
-+		pr_info("%s: No PHY or fixed-link\n", __func__);
-+		goto skip_phy_exit;
-+	}
-+
-+	pfe_phy_exit(priv->ndev);
-+
-+skip_phy_exit:
-+	if (!us)
-+		unregister_netdev(priv->ndev);
-+
-+	free_netdev(priv->ndev);
-+}
-+
-+/* pfe_eth_exit
-+ */
-+void pfe_eth_exit(struct pfe *pfe)
-+{
-+	int ii;
-+
-+	pr_info("%s\n", __func__);
-+
-+	for (ii = NUM_GEMAC_SUPPORT - 1; ii >= 0; ii--)
-+		pfe_eth_exit_one(pfe->eth.eth_priv[ii]);
-+
-+	for (ii = NUM_GEMAC_SUPPORT - 1; ii >= 0; ii--)
-+		pfe_eth_mdio_exit(pfe, ii);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.h
-@@ -0,0 +1,175 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#ifndef _PFE_ETH_H_
-+#define _PFE_ETH_H_
-+#include <linux/kernel.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/phy.h>
-+#include <linux/clk.h>
-+#include <linux/interrupt.h>
-+#include <linux/time.h>
-+
-+#define PFE_ETH_NAPI_STATS
-+#define PFE_ETH_TX_STATS
-+
-+#define PFE_ETH_FRAGS_MAX (65536 / HIF_RX_PKT_MIN_SIZE)
-+#define LRO_LEN_COUNT_MAX	32
-+#define LRO_NB_COUNT_MAX	32
-+
-+#define PFE_PAUSE_FLAG_ENABLE		1
-+#define PFE_PAUSE_FLAG_AUTONEG		2
-+
-+/* GEMAC configured by SW */
-+/* GEMAC configured by phy lines (not for MII/GMII) */
-+
-+#define GEMAC_SW_FULL_DUPLEX    BIT(9)
-+#define GEMAC_SW_SPEED_10M      (0 << 12)
-+#define GEMAC_SW_SPEED_100M     BIT(12)
-+#define GEMAC_SW_SPEED_1G       (2 << 12)
-+
-+#define GEMAC_NO_PHY            BIT(0)
-+
-+struct ls1012a_eth_platform_data {
-+	/* board specific information */
-+	phy_interface_t mii_config;
-+	u32 phy_flags;
-+	u32 gem_id;
-+	u32 phy_id;
-+	u32 mdio_muxval;
-+	u8 mac_addr[ETH_ALEN];
-+	struct device_node	*phy_node;
-+};
-+
-+struct ls1012a_mdio_platform_data {
-+	int id;
-+	int irq[32];
-+	u32 phy_mask;
-+	int mdc_div;
-+};
-+
-+struct ls1012a_pfe_platform_data {
-+	struct ls1012a_eth_platform_data ls1012a_eth_pdata[3];
-+	struct ls1012a_mdio_platform_data ls1012a_mdio_pdata[3];
-+};
-+
-+#define NUM_GEMAC_SUPPORT	2
-+#define DRV_NAME		"pfe-eth"
-+#define DRV_VERSION		"1.0"
-+
-+#define LS1012A_TX_FAST_RECOVERY_TIMEOUT_MS	3
-+#define TX_POLL_TIMEOUT_MS	1000
-+
-+#define EMAC_TXQ_CNT	16
-+#define EMAC_TXQ_DEPTH	(HIF_TX_DESC_NT)
-+
-+#define JUMBO_FRAME_SIZE_V1	1900
-+#define JUMBO_FRAME_SIZE_V2	10258
-+/*
-+ * Client Tx queue threshold, for txQ flush condition.
-+ * It must be smaller than the queue size (in case we ever change it in the
-+ * future).
-+ */
-+#define HIF_CL_TX_FLUSH_MARK	32
-+
-+/*
-+ * Max number of TX resources (HIF descriptors or skbs) that will be released
-+ * in a single go during batch recycling.
-+ * Should be lower than the flush mark so the SW can provide the HW with a
-+ * continuous stream of packets instead of bursts.
-+ */
-+#define TX_FREE_MAX_COUNT 16
-+#define EMAC_RXQ_CNT	3
-+#define EMAC_RXQ_DEPTH	HIF_RX_DESC_NT
-+/* make sure clients can receive a full burst of packets */
-+#define EMAC_RMON_TXBYTES_POS	0x00
-+#define EMAC_RMON_RXBYTES_POS	0x14
-+
-+#define EMAC_QUEUENUM_MASK      (emac_txq_cnt - 1)
-+#define EMAC_MDIO_TIMEOUT	1000
-+#define MAX_UC_SPEC_ADDR_REG 31
-+
-+struct pfe_eth_fast_timer {
-+	int queuenum;
-+	struct hrtimer timer;
-+	void *base;
-+};
-+
-+struct  pfe_eth_priv_s {
-+	struct pfe		*pfe;
-+	struct hif_client_s	client;
-+	struct napi_struct	lro_napi;
-+	struct napi_struct	low_napi;
-+	struct napi_struct	high_napi;
-+	int			low_tmu_q;
-+	int			high_tmu_q;
-+	struct net_device_stats stats;
-+	struct net_device	*ndev;
-+	int			id;
-+	int			promisc;
-+	unsigned int		msg_enable;
-+	unsigned int		usr_features;
-+
-+	spinlock_t		lock; /* protect member variables */
-+	unsigned int		event_status;
-+	int			irq;
-+	void			*EMAC_baseaddr;
-+	void			*GPI_baseaddr;
-+	/* PHY stuff */
-+	struct phy_device	*phydev;
-+	int			oldspeed;
-+	int			oldduplex;
-+	int			oldlink;
-+	struct device_node	*phy_node;
-+	struct clk		*gemtx_clk;
-+	int			wol;
-+	int			pause_flag;
-+
-+	int			default_priority;
-+	struct pfe_eth_fast_timer fast_tx_timeout[EMAC_TXQ_CNT];
-+
-+	struct ls1012a_eth_platform_data *einfo;
-+	struct sk_buff *skb_inflight[EMAC_RXQ_CNT + 6];
-+
-+#ifdef PFE_ETH_TX_STATS
-+	unsigned int stop_queue_total[EMAC_TXQ_CNT];
-+	unsigned int stop_queue_hif[EMAC_TXQ_CNT];
-+	unsigned int stop_queue_hif_client[EMAC_TXQ_CNT];
-+	unsigned int stop_queue_credit[EMAC_TXQ_CNT];
-+	unsigned int clean_fail[EMAC_TXQ_CNT];
-+	unsigned int was_stopped[EMAC_TXQ_CNT];
-+#endif
-+
-+#ifdef PFE_ETH_NAPI_STATS
-+	unsigned int napi_counters[NAPI_MAX_COUNT];
-+#endif
-+	unsigned int frags_inflight[EMAC_RXQ_CNT + 6];
-+};
-+
-+struct pfe_eth {
-+	struct pfe_eth_priv_s *eth_priv[3];
-+};
-+
-+struct pfe_mdio_priv_s {
-+	void __iomem *mdio_base;
-+	int			mdc_div;
-+	struct mii_bus		*mii_bus;
-+};
-+
-+struct pfe_mdio {
-+	struct pfe_mdio_priv_s *mdio_priv[3];
-+};
-+
-+int pfe_eth_init(struct pfe *pfe);
-+void pfe_eth_exit(struct pfe *pfe);
-+int pfe_eth_suspend(struct net_device *dev);
-+int pfe_eth_resume(struct net_device *dev);
-+int pfe_eth_mdio_reset(struct mii_bus *bus);
-+
-+#endif /* _PFE_ETH_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_firmware.c
-@@ -0,0 +1,398 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+/*
-+ * @file
-+ * Contains all the functions to handle parsing and loading of PE firmware
-+ * files.
-+ */
-+#include <linux/firmware.h>
-+
-+#include "pfe_mod.h"
-+#include "pfe_firmware.h"
-+#include "pfe/pfe.h"
-+#include <linux/of_platform.h>
-+#include <linux/of_address.h>
-+
-+static struct elf32_shdr *get_elf_section_header(const u8 *fw,
-+						 const char *section)
-+{
-+	struct elf32_hdr *elf_hdr = (struct elf32_hdr *)fw;
-+	struct elf32_shdr *shdr;
-+	struct elf32_shdr *shdr_shstr;
-+	Elf32_Off e_shoff = be32_to_cpu(elf_hdr->e_shoff);
-+	Elf32_Half e_shentsize = be16_to_cpu(elf_hdr->e_shentsize);
-+	Elf32_Half e_shnum = be16_to_cpu(elf_hdr->e_shnum);
-+	Elf32_Half e_shstrndx = be16_to_cpu(elf_hdr->e_shstrndx);
-+	Elf32_Off shstr_offset;
-+	Elf32_Word sh_name;
-+	const char *name;
-+	int i;
-+
-+	/* Section header strings */
-+	shdr_shstr = (struct elf32_shdr *)((u8 *)elf_hdr + e_shoff + e_shstrndx
-+					* e_shentsize);
-+	shstr_offset = be32_to_cpu(shdr_shstr->sh_offset);
-+
-+	for (i = 0; i < e_shnum; i++) {
-+		shdr = (struct elf32_shdr *)((u8 *)elf_hdr + e_shoff
-+					     + i * e_shentsize);
-+
-+		sh_name = be32_to_cpu(shdr->sh_name);
-+
-+		name = (const char *)((u8 *)elf_hdr + shstr_offset + sh_name);
-+
-+		if (!strcmp(name, section))
-+			return shdr;
-+	}
-+
-+	pr_err("%s: didn't find section %s\n", __func__, section);
-+
-+	return NULL;
-+}
-+
-+#if defined(CFG_DIAGS)
-+static int pfe_get_diags_info(const u8 *fw, struct pfe_diags_info
-+				*diags_info)
-+{
-+	struct elf32_shdr *shdr;
-+	unsigned long offset, size;
-+
-+	shdr = get_elf_section_header(fw, ".pfe_diags_str");
-+	if (shdr) {
-+		offset = be32_to_cpu(shdr->sh_offset);
-+		size = be32_to_cpu(shdr->sh_size);
-+		diags_info->diags_str_base = be32_to_cpu(shdr->sh_addr);
-+		diags_info->diags_str_size = size;
-+		diags_info->diags_str_array = kmalloc(size, GFP_KERNEL);
-+		memcpy(diags_info->diags_str_array, fw + offset, size);
-+
-+		return 0;
-+	} else {
-+		return -1;
-+	}
-+}
-+#endif
-+
-+static void pfe_check_version_info(const u8 *fw)
-+{
-+	/*static char *version = NULL;*/
-+	const u8 *elf_data = fw;
-+	static char *version;
-+
-+	struct elf32_shdr *shdr = get_elf_section_header(fw, ".version");
-+
-+	if (shdr) {
-+		if (!version) {
-+			/*
-+			 * this is the first fw we load, use its version
-+			 * string as reference (whatever it is)
-+			 */
-+			version = (char *)(elf_data +
-+					be32_to_cpu(shdr->sh_offset));
-+
-+			pr_info("PFE binary version: %s\n", version);
-+		} else {
-+			/*
-+			 * already have loaded at least one firmware, check
-+			 * sequence can start now
-+			 */
-+			if (strcmp(version, (char *)(elf_data +
-+				be32_to_cpu(shdr->sh_offset)))) {
-+				pr_info(
-+				"WARNING: PFE firmware binaries from incompatible version\n");
-+			}
-+		}
-+	} else {
-+		/*
-+		 * version cannot be verified, a potential issue that should
-+		 * be reported
-+		 */
-+		pr_info(
-+			 "WARNING: PFE firmware binaries from incompatible version\n");
-+	}
-+}
-+
-+/* PFE elf firmware loader.
-+ * Loads an elf firmware image into a list of PE's (specified using a bitmask)
-+ *
-+ * @param pe_mask	Mask of PE id's to load firmware to
-+ * @param fw		Pointer to the firmware image
-+ *
-+ * @return		0 on success, a negative value on error
-+ *
-+ */
-+int pfe_load_elf(int pe_mask, const u8 *fw, struct pfe *pfe)
-+{
-+	struct elf32_hdr *elf_hdr = (struct elf32_hdr *)fw;
-+	Elf32_Half sections = be16_to_cpu(elf_hdr->e_shnum);
-+	struct elf32_shdr *shdr = (struct elf32_shdr *)(fw +
-+					be32_to_cpu(elf_hdr->e_shoff));
-+	int id, section;
-+	int rc;
-+
-+	pr_info("%s\n", __func__);
-+
-+	/* Some sanity checks */
-+	if (strncmp(&elf_hdr->e_ident[EI_MAG0], ELFMAG, SELFMAG)) {
-+		pr_err("%s: incorrect elf magic number\n", __func__);
-+		return -EINVAL;
-+	}
-+
-+	if (elf_hdr->e_ident[EI_CLASS] != ELFCLASS32) {
-+		pr_err("%s: incorrect elf class(%x)\n", __func__,
-+		       elf_hdr->e_ident[EI_CLASS]);
-+		return -EINVAL;
-+	}
-+
-+	if (elf_hdr->e_ident[EI_DATA] != ELFDATA2MSB) {
-+		pr_err("%s: incorrect elf data(%x)\n", __func__,
-+		       elf_hdr->e_ident[EI_DATA]);
-+		return -EINVAL;
-+	}
-+
-+	if (be16_to_cpu(elf_hdr->e_type) != ET_EXEC) {
-+		pr_err("%s: incorrect elf file type(%x)\n", __func__,
-+		       be16_to_cpu(elf_hdr->e_type));
-+		return -EINVAL;
-+	}
-+
-+	for (section = 0; section < sections; section++, shdr++) {
-+		if (!(be32_to_cpu(shdr->sh_flags) & (SHF_WRITE | SHF_ALLOC |
-+			SHF_EXECINSTR)))
-+			continue;
-+
-+		for (id = 0; id < MAX_PE; id++)
-+			if (pe_mask & (1 << id)) {
-+				rc = pe_load_elf_section(id, elf_hdr, shdr,
-+							 pfe->dev);
-+				if (rc < 0)
-+					goto err;
-+			}
-+	}
-+
-+	pfe_check_version_info(fw);
-+
-+	return 0;
-+
-+err:
-+	return rc;
-+}
-+
-+int get_firmware_in_fdt(const u8 **pe_fw, const char *name)
-+{
-+	struct device_node *np;
-+	const unsigned int *len;
-+	const void *data;
-+
-+	if (!strcmp(name, CLASS_FIRMWARE_FILENAME)) {
-+		/* The firmware should be inside the device tree. */
-+		np = of_find_compatible_node(NULL, NULL,
-+					     "fsl,pfe-class-firmware");
-+		if (!np) {
-+			pr_info("Failed to find the node\n");
-+			return -ENOENT;
-+		}
-+
-+		data = of_get_property(np, "fsl,class-firmware", NULL);
-+		if (data) {
-+			len = of_get_property(np, "length", NULL);
-+			pr_info("CLASS fw of length %d bytes loaded from FDT.\n",
-+				be32_to_cpu(*len));
-+		} else {
-+			pr_info("fsl,class-firmware not found!!!!\n");
-+			return -ENOENT;
-+		}
-+		of_node_put(np);
-+		*pe_fw = data;
-+	} else if (!strcmp(name, TMU_FIRMWARE_FILENAME)) {
-+		np = of_find_compatible_node(NULL, NULL,
-+					     "fsl,pfe-tmu-firmware");
-+		if (!np) {
-+			pr_info("Failed to find the node\n");
-+			return -ENOENT;
-+		}
-+
-+		data = of_get_property(np, "fsl,tmu-firmware", NULL);
-+		if (data) {
-+			len = of_get_property(np, "length", NULL);
-+			pr_info("TMU fw of length %d bytes loaded from FDT.\n",
-+				be32_to_cpu(*len));
-+		} else {
-+			pr_info("fsl,tmu-firmware not found!!!!\n");
-+			return -ENOENT;
-+		}
-+		of_node_put(np);
-+		*pe_fw = data;
-+	} else if (!strcmp(name, UTIL_FIRMWARE_FILENAME)) {
-+		np = of_find_compatible_node(NULL, NULL,
-+					     "fsl,pfe-util-firmware");
-+		if (!np) {
-+			pr_info("Failed to find the node\n");
-+			return -ENOENT;
-+		}
-+
-+		data = of_get_property(np, "fsl,util-firmware", NULL);
-+		if (data) {
-+			len = of_get_property(np, "length", NULL);
-+			pr_info("UTIL fw of length %d bytes loaded from FDT.\n",
-+				be32_to_cpu(*len));
-+		} else {
-+			pr_info("fsl,util-firmware not found!!!!\n");
-+			return -ENOENT;
-+		}
-+		of_node_put(np);
-+		*pe_fw = data;
-+	} else {
-+		pr_err("firmware:%s not known\n", name);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/* PFE firmware initialization.
-+ * Loads different firmware files from filesystem.
-+ * Initializes PE IMEM/DMEM and UTIL-PE DDR
-+ * Initializes control path symbol addresses (by looking them up in the elf
-+ * firmware files
-+ * Takes PE's out of reset
-+ *
-+ * @return	0 on success, a negative value on error
-+ *
-+ */
-+int pfe_firmware_init(struct pfe *pfe)
-+{
-+	const struct firmware *class_fw, *tmu_fw;
-+	const u8 *class_elf_fw, *tmu_elf_fw;
-+	int rc = 0, fs_load = 0;
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	const struct firmware *util_fw;
-+	const u8 *util_elf_fw;
-+
-+#endif
-+
-+	pr_info("%s\n", __func__);
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	if (get_firmware_in_fdt(&class_elf_fw, CLASS_FIRMWARE_FILENAME) ||
-+	    get_firmware_in_fdt(&tmu_elf_fw, TMU_FIRMWARE_FILENAME) ||
-+	    get_firmware_in_fdt(&util_elf_fw, UTIL_FIRMWARE_FILENAME))
-+#else
-+	if (get_firmware_in_fdt(&class_elf_fw, CLASS_FIRMWARE_FILENAME) ||
-+	    get_firmware_in_fdt(&tmu_elf_fw, TMU_FIRMWARE_FILENAME))
-+#endif
-+	{
-+		pr_info("%s:PFE firmware not found in FDT.\n", __func__);
-+		pr_info("%s:Trying to load firmware from filesystem...!\n", __func__);
-+
-+		/* look for firmware in filesystem...!*/
-+		fs_load = 1;
-+		if (request_firmware(&class_fw, CLASS_FIRMWARE_FILENAME, pfe->dev)) {
-+			pr_err("%s: request firmware %s failed\n", __func__,
-+			       CLASS_FIRMWARE_FILENAME);
-+			rc = -ETIMEDOUT;
-+			goto err0;
-+		}
-+		class_elf_fw = class_fw->data;
-+
-+		if (request_firmware(&tmu_fw, TMU_FIRMWARE_FILENAME, pfe->dev)) {
-+			pr_err("%s: request firmware %s failed\n", __func__,
-+			       TMU_FIRMWARE_FILENAME);
-+			rc = -ETIMEDOUT;
-+			goto err1;
-+		}
-+		tmu_elf_fw = tmu_fw->data;
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+		if (request_firmware(&util_fw, UTIL_FIRMWARE_FILENAME, pfe->dev)) {
-+			pr_err("%s: request firmware %s failed\n", __func__,
-+			       UTIL_FIRMWARE_FILENAME);
-+			rc = -ETIMEDOUT;
-+			goto err2;
-+		}
-+		util_elf_fw = util_fw->data;
-+#endif
-+	}
-+
-+	rc = pfe_load_elf(CLASS_MASK, class_elf_fw, pfe);
-+	if (rc < 0) {
-+		pr_err("%s: class firmware load failed\n", __func__);
-+		goto err3;
-+	}
-+
-+#if defined(CFG_DIAGS)
-+	rc = pfe_get_diags_info(class_elf_fw, &pfe->diags.class_diags_info);
-+	if (rc < 0) {
-+		pr_warn(
-+			"PFE diags won't be available for class PEs\n");
-+		rc = 0;
-+	}
-+#endif
-+
-+	rc = pfe_load_elf(TMU_MASK, tmu_elf_fw, pfe);
-+	if (rc < 0) {
-+		pr_err("%s: tmu firmware load failed\n", __func__);
-+		goto err3;
-+	}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	rc = pfe_load_elf(UTIL_MASK, util_elf_fw, pfe);
-+	if (rc < 0) {
-+		pr_err("%s: util firmware load failed\n", __func__);
-+		goto err3;
-+	}
-+
-+#if defined(CFG_DIAGS)
-+	rc = pfe_get_diags_info(util_elf_fw, &pfe->diags.util_diags_info);
-+	if (rc < 0) {
-+		pr_warn(
-+			"PFE diags won't be available for util PE\n");
-+		rc = 0;
-+	}
-+#endif
-+
-+	util_enable();
-+#endif
-+
-+	tmu_enable(0xf);
-+	class_enable();
-+
-+err3:
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	if (fs_load)
-+		release_firmware(util_fw);
-+err2:
-+#endif
-+	if (fs_load)
-+		release_firmware(tmu_fw);
-+
-+err1:
-+	if (fs_load)
-+		release_firmware(class_fw);
-+
-+err0:
-+	return rc;
-+}
-+
-+/* PFE firmware cleanup
-+ * Puts PE's in reset
-+ *
-+ *
-+ */
-+void pfe_firmware_exit(struct pfe *pfe)
-+{
-+	pr_info("%s\n", __func__);
-+
-+	if (pe_reset_all(&pfe->ctrl) != 0)
-+		pr_err("Error: Failed to stop PEs, PFE reload may not work correctly\n");
-+
-+	class_disable();
-+	tmu_disable(0xf);
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	util_disable();
-+#endif
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_firmware.h
-@@ -0,0 +1,21 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#ifndef _PFE_FIRMWARE_H_
-+#define _PFE_FIRMWARE_H_
-+
-+#define CLASS_FIRMWARE_FILENAME		"ppfe_class_ls1012a.elf"
-+#define TMU_FIRMWARE_FILENAME		"ppfe_tmu_ls1012a.elf"
-+#define UTIL_FIRMWARE_FILENAME		"ppfe_util_ls1012a.elf"
-+
-+#define PFE_FW_CHECK_PASS		0
-+#define PFE_FW_CHECK_FAIL		1
-+#define NUM_PFE_FW				3
-+
-+int pfe_firmware_init(struct pfe *pfe);
-+void pfe_firmware_exit(struct pfe *pfe);
-+
-+#endif /* _PFE_FIRMWARE_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hal.c
-@@ -0,0 +1,1517 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#include "pfe_mod.h"
-+#include "pfe/pfe.h"
-+
-+/* A-010897: Jumbo frame is not supported */
-+extern bool pfe_errata_a010897;
-+
-+#define PFE_RCR_MAX_FL_MASK	0xC000FFFF
-+
-+void *cbus_base_addr;
-+void *ddr_base_addr;
-+unsigned long ddr_phys_base_addr;
-+unsigned int ddr_size;
-+
-+static struct pe_info pe[MAX_PE];
-+
-+/* Initializes the PFE library.
-+ * Must be called before using any of the library functions.
-+ *
-+ * @param[in] cbus_base		CBUS virtual base address (as mapped in
-+ * the host CPU address space)
-+ * @param[in] ddr_base		PFE DDR range virtual base address (as
-+ * mapped in the host CPU address space)
-+ * @param[in] ddr_phys_base	PFE DDR range physical base address (as
-+ * mapped in platform)
-+ * @param[in] size		PFE DDR range size (as defined by the host
-+ * software)
-+ */
-+void pfe_lib_init(void *cbus_base, void *ddr_base, unsigned long ddr_phys_base,
-+		  unsigned int size)
-+{
-+	cbus_base_addr = cbus_base;
-+	ddr_base_addr = ddr_base;
-+	ddr_phys_base_addr = ddr_phys_base;
-+	ddr_size = size;
-+
-+	pe[CLASS0_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(0);
-+	pe[CLASS0_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(0);
-+	pe[CLASS0_ID].pmem_size = CLASS_IMEM_SIZE;
-+	pe[CLASS0_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
-+	pe[CLASS0_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
-+	pe[CLASS0_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
-+
-+	pe[CLASS1_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(1);
-+	pe[CLASS1_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(1);
-+	pe[CLASS1_ID].pmem_size = CLASS_IMEM_SIZE;
-+	pe[CLASS1_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
-+	pe[CLASS1_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
-+	pe[CLASS1_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
-+
-+	pe[CLASS2_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(2);
-+	pe[CLASS2_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(2);
-+	pe[CLASS2_ID].pmem_size = CLASS_IMEM_SIZE;
-+	pe[CLASS2_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
-+	pe[CLASS2_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
-+	pe[CLASS2_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
-+
-+	pe[CLASS3_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(3);
-+	pe[CLASS3_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(3);
-+	pe[CLASS3_ID].pmem_size = CLASS_IMEM_SIZE;
-+	pe[CLASS3_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
-+	pe[CLASS3_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
-+	pe[CLASS3_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
-+
-+	pe[CLASS4_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(4);
-+	pe[CLASS4_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(4);
-+	pe[CLASS4_ID].pmem_size = CLASS_IMEM_SIZE;
-+	pe[CLASS4_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
-+	pe[CLASS4_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
-+	pe[CLASS4_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
-+
-+	pe[CLASS5_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(5);
-+	pe[CLASS5_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(5);
-+	pe[CLASS5_ID].pmem_size = CLASS_IMEM_SIZE;
-+	pe[CLASS5_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
-+	pe[CLASS5_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
-+	pe[CLASS5_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
-+
-+	pe[TMU0_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(0);
-+	pe[TMU0_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(0);
-+	pe[TMU0_ID].pmem_size = TMU_IMEM_SIZE;
-+	pe[TMU0_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA;
-+	pe[TMU0_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR;
-+	pe[TMU0_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA;
-+
-+	pe[TMU1_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(1);
-+	pe[TMU1_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(1);
-+	pe[TMU1_ID].pmem_size = TMU_IMEM_SIZE;
-+	pe[TMU1_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA;
-+	pe[TMU1_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR;
-+	pe[TMU1_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA;
-+
-+	pe[TMU3_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(3);
-+	pe[TMU3_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(3);
-+	pe[TMU3_ID].pmem_size = TMU_IMEM_SIZE;
-+	pe[TMU3_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA;
-+	pe[TMU3_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR;
-+	pe[TMU3_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA;
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	pe[UTIL_ID].dmem_base_addr = UTIL_DMEM_BASE_ADDR;
-+	pe[UTIL_ID].mem_access_wdata = UTIL_MEM_ACCESS_WDATA;
-+	pe[UTIL_ID].mem_access_addr = UTIL_MEM_ACCESS_ADDR;
-+	pe[UTIL_ID].mem_access_rdata = UTIL_MEM_ACCESS_RDATA;
-+#endif
-+}
-+
-+/* Writes a buffer to PE internal memory from the host
-+ * through indirect access registers.
-+ *
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] src		Buffer source address
-+ * @param[in] mem_access_addr	DMEM destination address (must be 32bit
-+ * aligned)
-+ * @param[in] len		Number of bytes to copy
-+ */
-+void pe_mem_memcpy_to32(int id, u32 mem_access_addr, const void *src, unsigned
-+int len)
-+{
-+	u32 offset = 0, val, addr;
-+	unsigned int len32 = len >> 2;
-+	int i;
-+
-+	addr = mem_access_addr | PE_MEM_ACCESS_WRITE |
-+		PE_MEM_ACCESS_BYTE_ENABLE(0, 4);
-+
-+	for (i = 0; i < len32; i++, offset += 4, src += 4) {
-+		val = *(u32 *)src;
-+		writel(cpu_to_be32(val), pe[id].mem_access_wdata);
-+		writel(addr + offset, pe[id].mem_access_addr);
-+	}
-+
-+	len = (len & 0x3);
-+	if (len) {
-+		val = 0;
-+
-+		addr = (mem_access_addr | PE_MEM_ACCESS_WRITE |
-+			PE_MEM_ACCESS_BYTE_ENABLE(0, len)) + offset;
-+
-+		for (i = 0; i < len; i++, src++)
-+			val |= (*(u8 *)src) << (8 * i);
-+
-+		writel(cpu_to_be32(val), pe[id].mem_access_wdata);
-+		writel(addr, pe[id].mem_access_addr);
-+	}
-+}
-+
-+/* Writes a buffer to PE internal data memory (DMEM) from the host
-+ * through indirect access registers.
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] src		Buffer source address
-+ * @param[in] dst		DMEM destination address (must be 32bit
-+ * aligned)
-+ * @param[in] len		Number of bytes to copy
-+ */
-+void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len)
-+{
-+	pe_mem_memcpy_to32(id, pe[id].dmem_base_addr | dst |
-+				PE_MEM_ACCESS_DMEM, src, len);
-+}
-+
-+/* Writes a buffer to PE internal program memory (PMEM) from the host
-+ * through indirect access registers.
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., TMU3_ID)
-+ * @param[in] src		Buffer source address
-+ * @param[in] dst		PMEM destination address (must be 32bit
-+ * aligned)
-+ * @param[in] len		Number of bytes to copy
-+ */
-+void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len)
-+{
-+	pe_mem_memcpy_to32(id, pe[id].pmem_base_addr | (dst & (pe[id].pmem_size
-+				- 1)) | PE_MEM_ACCESS_IMEM, src, len);
-+}
-+
-+/* Reads PE internal program memory (IMEM) from the host
-+ * through indirect access registers.
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., TMU3_ID)
-+ * @param[in] addr		PMEM read address (must be aligned on size)
-+ * @param[in] size		Number of bytes to read (maximum 4, must not
-+ * cross 32bit boundaries)
-+ * @return			the data read (in PE endianness, i.e BE).
-+ */
-+u32 pe_pmem_read(int id, u32 addr, u8 size)
-+{
-+	u32 offset = addr & 0x3;
-+	u32 mask = 0xffffffff >> ((4 - size) << 3);
-+	u32 val;
-+
-+	addr = pe[id].pmem_base_addr | ((addr & ~0x3) & (pe[id].pmem_size - 1))
-+		| PE_MEM_ACCESS_IMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
-+
-+	writel(addr, pe[id].mem_access_addr);
-+	val = be32_to_cpu(readl(pe[id].mem_access_rdata));
-+
-+	return (val >> (offset << 3)) & mask;
-+}
-+
-+/* Writes PE internal data memory (DMEM) from the host
-+ * through indirect access registers.
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] addr		DMEM write address (must be aligned on size)
-+ * @param[in] val		Value to write (in PE endianness, i.e BE)
-+ * @param[in] size		Number of bytes to write (maximum 4, must not
-+ * cross 32bit boundaries)
-+ */
-+void pe_dmem_write(int id, u32 val, u32 addr, u8 size)
-+{
-+	u32 offset = addr & 0x3;
-+
-+	addr = pe[id].dmem_base_addr | (addr & ~0x3) | PE_MEM_ACCESS_WRITE |
-+		PE_MEM_ACCESS_DMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
-+
-+	/* Indirect access interface is byte swapping data being written */
-+	writel(cpu_to_be32(val << (offset << 3)), pe[id].mem_access_wdata);
-+	writel(addr, pe[id].mem_access_addr);
-+}
-+
-+/* Reads PE internal data memory (DMEM) from the host
-+ * through indirect access registers.
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] addr		DMEM read address (must be aligned on size)
-+ * @param[in] size		Number of bytes to read (maximum 4, must not
-+ * cross 32bit boundaries)
-+ * @return			the data read (in PE endianness, i.e BE).
-+ */
-+u32 pe_dmem_read(int id, u32 addr, u8 size)
-+{
-+	u32 offset = addr & 0x3;
-+	u32 mask = 0xffffffff >> ((4 - size) << 3);
-+	u32 val;
-+
-+	addr = pe[id].dmem_base_addr | (addr & ~0x3) | PE_MEM_ACCESS_DMEM |
-+			PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
-+
-+	writel(addr, pe[id].mem_access_addr);
-+
-+	/* Indirect access interface is byte swapping data being read */
-+	val = be32_to_cpu(readl(pe[id].mem_access_rdata));
-+
-+	return (val >> (offset << 3)) & mask;
-+}
-+
-+/* This function is used to write to CLASS internal bus peripherals (ccu,
-+ * pe-lem) from the host
-+ * through indirect access registers.
-+ * @param[in]	val	value to write
-+ * @param[in]	addr	Address to write to (must be aligned on size)
-+ * @param[in]	size	Number of bytes to write (1, 2 or 4)
-+ *
-+ */
-+void class_bus_write(u32 val, u32 addr, u8 size)
-+{
-+	u32 offset = addr & 0x3;
-+
-+	writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE);
-+
-+	addr = (addr & ~CLASS_BUS_ACCESS_BASE_MASK) | PE_MEM_ACCESS_WRITE |
-+			(size << 24);
-+
-+	writel(cpu_to_be32(val << (offset << 3)), CLASS_BUS_ACCESS_WDATA);
-+	writel(addr, CLASS_BUS_ACCESS_ADDR);
-+}
-+
-+/* Reads from CLASS internal bus peripherals (ccu, pe-lem) from the host
-+ * through indirect access registers.
-+ * @param[in] addr	Address to read from (must be aligned on size)
-+ * @param[in] size	Number of bytes to read (1, 2 or 4)
-+ * @return		the read data
-+ *
-+ */
-+u32 class_bus_read(u32 addr, u8 size)
-+{
-+	u32 offset = addr & 0x3;
-+	u32 mask = 0xffffffff >> ((4 - size) << 3);
-+	u32 val;
-+
-+	writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE);
-+
-+	addr = (addr & ~CLASS_BUS_ACCESS_BASE_MASK) | (size << 24);
-+
-+	writel(addr, CLASS_BUS_ACCESS_ADDR);
-+	val = be32_to_cpu(readl(CLASS_BUS_ACCESS_RDATA));
-+
-+	return (val >> (offset << 3)) & mask;
-+}
-+
-+/* Writes data to the cluster memory (PE_LMEM)
-+ * @param[in] dst	PE LMEM destination address (must be 32bit aligned)
-+ * @param[in] src	Buffer source address
-+ * @param[in] len	Number of bytes to copy
-+ */
-+void class_pe_lmem_memcpy_to32(u32 dst, const void *src, unsigned int len)
-+{
-+	u32 len32 = len >> 2;
-+	int i;
-+
-+	for (i = 0; i < len32; i++, src += 4, dst += 4)
-+		class_bus_write(*(u32 *)src, dst, 4);
-+
-+	if (len & 0x2) {
-+		class_bus_write(*(u16 *)src, dst, 2);
-+		src += 2;
-+		dst += 2;
-+	}
-+
-+	if (len & 0x1) {
-+		class_bus_write(*(u8 *)src, dst, 1);
-+		src++;
-+		dst++;
-+	}
-+}
-+
-+/* Writes value to the cluster memory (PE_LMEM)
-+ * @param[in] dst	PE LMEM destination address (must be 32bit aligned)
-+ * @param[in] val	Value to write
-+ * @param[in] len	Number of bytes to write
-+ */
-+void class_pe_lmem_memset(u32 dst, int val, unsigned int len)
-+{
-+	u32 len32 = len >> 2;
-+	int i;
-+
-+	val = val | (val << 8) | (val << 16) | (val << 24);
-+
-+	for (i = 0; i < len32; i++, dst += 4)
-+		class_bus_write(val, dst, 4);
-+
-+	if (len & 0x2) {
-+		class_bus_write(val, dst, 2);
-+		dst += 2;
-+	}
-+
-+	if (len & 0x1) {
-+		class_bus_write(val, dst, 1);
-+		dst++;
-+	}
-+}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+
-+/* Writes UTIL program memory (DDR) from the host.
-+ *
-+ * @param[in] addr	Address to write (virtual, must be aligned on size)
-+ * @param[in] val		Value to write (in PE endianness, i.e BE)
-+ * @param[in] size		Number of bytes to write (2 or 4)
-+ */
-+static void util_pmem_write(u32 val, void *addr, u8 size)
-+{
-+	void *addr64 = (void *)((unsigned long)addr & ~0x7);
-+	unsigned long off = 8 - ((unsigned long)addr & 0x7) - size;
-+
-+	/*
-+	 * IMEM should  be loaded as a 64bit swapped value in a 64bit aligned
-+	 * location
-+	 */
-+	if (size == 4)
-+		writel(be32_to_cpu(val), addr64 + off);
-+	else
-+		writew(be16_to_cpu((u16)val), addr64 + off);
-+}
-+
-+/* Writes a buffer to UTIL program memory (DDR) from the host.
-+ *
-+ * @param[in] dst	Address to write (virtual, must be at least 16bit
-+ * aligned)
-+ * @param[in] src	Buffer to write (in PE endianness, i.e BE, must have
-+ * same alignment as dst)
-+ * @param[in] len	Number of bytes to write (must be at least 16bit
-+ * aligned)
-+ */
-+static void util_pmem_memcpy(void *dst, const void *src, unsigned int len)
-+{
-+	unsigned int len32;
-+	int i;
-+
-+	if ((unsigned long)src & 0x2) {
-+		util_pmem_write(*(u16 *)src, dst, 2);
-+		src += 2;
-+		dst += 2;
-+		len -= 2;
-+	}
-+
-+	len32 = len >> 2;
-+
-+	for (i = 0; i < len32; i++, dst += 4, src += 4)
-+		util_pmem_write(*(u32 *)src, dst, 4);
-+
-+	if (len & 0x2)
-+		util_pmem_write(*(u16 *)src, dst, len & 0x2);
-+}
-+#endif
-+
-+/* Loads an elf section into pmem
-+ * Code needs to be at least 16bit aligned and only PROGBITS sections are
-+ * supported
-+ *
-+ * @param[in] id	PE identification (CLASS0_ID, ..., TMU0_ID, ...,
-+ * TMU3_ID)
-+ * @param[in] data	pointer to the elf firmware
-+ * @param[in] shdr	pointer to the elf section header
-+ *
-+ */
-+static int pe_load_pmem_section(int id, const void *data,
-+				struct elf32_shdr *shdr)
-+{
-+	u32 offset = be32_to_cpu(shdr->sh_offset);
-+	u32 addr = be32_to_cpu(shdr->sh_addr);
-+	u32 size = be32_to_cpu(shdr->sh_size);
-+	u32 type = be32_to_cpu(shdr->sh_type);
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	if (id == UTIL_ID) {
-+		pr_err("%s: unsupported pmem section for UTIL\n",
-+		       __func__);
-+		return -EINVAL;
-+	}
-+#endif
-+
-+	if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) {
-+		pr_err(
-+			"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n"
-+			, __func__, addr, (unsigned long)data + offset);
-+
-+		return -EINVAL;
-+	}
-+
-+	if (addr & 0x1) {
-+		pr_err("%s: load address(%x) is not 16bit aligned\n",
-+		       __func__, addr);
-+		return -EINVAL;
-+	}
-+
-+	if (size & 0x1) {
-+		pr_err("%s: load size(%x) is not 16bit aligned\n",
-+		       __func__, size);
-+		return -EINVAL;
-+	}
-+
-+	switch (type) {
-+	case SHT_PROGBITS:
-+		pe_pmem_memcpy_to32(id, addr, data + offset, size);
-+
-+		break;
-+
-+	default:
-+		pr_err("%s: unsupported section type(%x)\n", __func__,
-+		       type);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/* Loads an elf section into dmem
-+ * Data needs to be at least 32bit aligned, NOBITS sections are correctly
-+ * initialized to 0
-+ *
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] data		pointer to the elf firmware
-+ * @param[in] shdr		pointer to the elf section header
-+ *
-+ */
-+static int pe_load_dmem_section(int id, const void *data,
-+				struct elf32_shdr *shdr)
-+{
-+	u32 offset = be32_to_cpu(shdr->sh_offset);
-+	u32 addr = be32_to_cpu(shdr->sh_addr);
-+	u32 size = be32_to_cpu(shdr->sh_size);
-+	u32 type = be32_to_cpu(shdr->sh_type);
-+	u32 size32 = size >> 2;
-+	int i;
-+
-+	if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) {
-+		pr_err(
-+			"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n",
-+			__func__, addr, (unsigned long)data + offset);
-+
-+		return -EINVAL;
-+	}
-+
-+	if (addr & 0x3) {
-+		pr_err("%s: load address(%x) is not 32bit aligned\n",
-+		       __func__, addr);
-+		return -EINVAL;
-+	}
-+
-+	switch (type) {
-+	case SHT_PROGBITS:
-+		pe_dmem_memcpy_to32(id, addr, data + offset, size);
-+		break;
-+
-+	case SHT_NOBITS:
-+		for (i = 0; i < size32; i++, addr += 4)
-+			pe_dmem_write(id, 0, addr, 4);
-+
-+		if (size & 0x3)
-+			pe_dmem_write(id, 0, addr, size & 0x3);
-+
-+		break;
-+
-+	default:
-+		pr_err("%s: unsupported section type(%x)\n", __func__,
-+		       type);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/* Loads an elf section into DDR
-+ * Data needs to be at least 32bit aligned, NOBITS sections are correctly
-+ * initialized to 0
-+ *
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] data		pointer to the elf firmware
-+ * @param[in] shdr		pointer to the elf section header
-+ *
-+ */
-+static int pe_load_ddr_section(int id, const void *data,
-+			       struct elf32_shdr *shdr,
-+			       struct device *dev) {
-+	u32 offset = be32_to_cpu(shdr->sh_offset);
-+	u32 addr = be32_to_cpu(shdr->sh_addr);
-+	u32 size = be32_to_cpu(shdr->sh_size);
-+	u32 type = be32_to_cpu(shdr->sh_type);
-+	u32 flags = be32_to_cpu(shdr->sh_flags);
-+
-+	switch (type) {
-+	case SHT_PROGBITS:
-+		if (flags & SHF_EXECINSTR) {
-+			if (id <= CLASS_MAX_ID) {
-+				/* DO the loading only once in DDR */
-+				if (id == CLASS0_ID) {
-+					pr_err(
-+						"%s: load address(%x) and elf file address(%lx) rcvd\n",
-+						__func__, addr,
-+						(unsigned long)data + offset);
-+					if (((unsigned long)(data + offset)
-+						& 0x3) != (addr & 0x3)) {
-+						pr_err(
-+							"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n"
-+							, __func__, addr,
-+						(unsigned long)data + offset);
-+
-+						return -EINVAL;
-+					}
-+
-+					if (addr & 0x1) {
-+						pr_err(
-+							"%s: load address(%x) is not 16bit aligned\n"
-+							, __func__, addr);
-+						return -EINVAL;
-+					}
-+
-+					if (size & 0x1) {
-+						pr_err(
-+							"%s: load length(%x) is not 16bit aligned\n"
-+							, __func__, size);
-+						return -EINVAL;
-+					}
-+					memcpy(DDR_PHYS_TO_VIRT(
-+						DDR_PFE_TO_PHYS(addr)),
-+						data + offset, size);
-+				}
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+			} else if (id == UTIL_ID) {
-+				if (((unsigned long)(data + offset) & 0x3)
-+					!= (addr & 0x3)) {
-+					pr_err(
-+						"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n"
-+						, __func__, addr,
-+						(unsigned long)data + offset);
-+
-+					return -EINVAL;
-+				}
-+
-+				if (addr & 0x1) {
-+					pr_err(
-+						"%s: load address(%x) is not 16bit aligned\n"
-+						, __func__, addr);
-+					return -EINVAL;
-+				}
-+
-+				if (size & 0x1) {
-+					pr_err(
-+						"%s: load length(%x) is not 16bit aligned\n"
-+						, __func__, size);
-+					return -EINVAL;
-+				}
-+
-+				util_pmem_memcpy(DDR_PHYS_TO_VIRT(
-+							DDR_PFE_TO_PHYS(addr)),
-+							data + offset, size);
-+			}
-+#endif
-+			} else {
-+				pr_err(
-+					"%s: unsupported ddr section type(%x) for PE(%d)\n"
-+						, __func__, type, id);
-+				return -EINVAL;
-+			}
-+
-+		} else {
-+			memcpy(DDR_PHYS_TO_VIRT(DDR_PFE_TO_PHYS(addr)), data
-+				+ offset, size);
-+		}
-+
-+		break;
-+
-+	case SHT_NOBITS:
-+		memset(DDR_PHYS_TO_VIRT(DDR_PFE_TO_PHYS(addr)), 0, size);
-+
-+		break;
-+
-+	default:
-+		pr_err("%s: unsupported section type(%x)\n", __func__,
-+		       type);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/* Loads an elf section into pe lmem
-+ * Data needs to be at least 32bit aligned, NOBITS sections are correctly
-+ * initialized to 0
-+ *
-+ * @param[in] id		PE identification (CLASS0_ID,..., CLASS5_ID)
-+ * @param[in] data		pointer to the elf firmware
-+ * @param[in] shdr		pointer to the elf section header
-+ *
-+ */
-+static int pe_load_pe_lmem_section(int id, const void *data,
-+				   struct elf32_shdr *shdr)
-+{
-+	u32 offset = be32_to_cpu(shdr->sh_offset);
-+	u32 addr = be32_to_cpu(shdr->sh_addr);
-+	u32 size = be32_to_cpu(shdr->sh_size);
-+	u32 type = be32_to_cpu(shdr->sh_type);
-+
-+	if (id > CLASS_MAX_ID) {
-+		pr_err(
-+			"%s: unsupported pe-lmem section type(%x) for PE(%d)\n",
-+			 __func__, type, id);
-+		return -EINVAL;
-+	}
-+
-+	if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) {
-+		pr_err(
-+			"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n",
-+			__func__, addr, (unsigned long)data + offset);
-+
-+		return -EINVAL;
-+	}
-+
-+	if (addr & 0x3) {
-+		pr_err("%s: load address(%x) is not 32bit aligned\n",
-+		       __func__, addr);
-+		return -EINVAL;
-+	}
-+
-+	switch (type) {
-+	case SHT_PROGBITS:
-+		class_pe_lmem_memcpy_to32(addr, data + offset, size);
-+		break;
-+
-+	case SHT_NOBITS:
-+		class_pe_lmem_memset(addr, 0, size);
-+		break;
-+
-+	default:
-+		pr_err("%s: unsupported section type(%x)\n", __func__,
-+		       type);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/* Loads an elf section into a PE
-+ * For now only supports loading a section to dmem (all PE's), pmem (class and
-+ * tmu PE's),
-+ * DDDR (util PE code)
-+ *
-+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
-+ * ..., UTIL_ID)
-+ * @param[in] data		pointer to the elf firmware
-+ * @param[in] shdr		pointer to the elf section header
-+ *
-+ */
-+int pe_load_elf_section(int id, const void *data, struct elf32_shdr *shdr,
-+			struct device *dev) {
-+	u32 addr = be32_to_cpu(shdr->sh_addr);
-+	u32 size = be32_to_cpu(shdr->sh_size);
-+
-+	if (IS_DMEM(addr, size))
-+		return pe_load_dmem_section(id, data, shdr);
-+	else if (IS_PMEM(addr, size))
-+		return pe_load_pmem_section(id, data, shdr);
-+	else if (IS_PFE_LMEM(addr, size))
-+		return 0;
-+	else if (IS_PHYS_DDR(addr, size))
-+		return pe_load_ddr_section(id, data, shdr, dev);
-+	else if (IS_PE_LMEM(addr, size))
-+		return pe_load_pe_lmem_section(id, data, shdr);
-+
-+	pr_err("%s: unsupported memory range(%x)\n", __func__,
-+	       addr);
-+	return 0;
-+}
-+
-+/**************************** BMU ***************************/
-+
-+/* Initializes a BMU block.
-+ * @param[in] base	BMU block base address
-+ * @param[in] cfg	BMU configuration
-+ */
-+void bmu_init(void *base, struct BMU_CFG *cfg)
-+{
-+	bmu_disable(base);
-+
-+	bmu_set_config(base, cfg);
-+
-+	bmu_reset(base);
-+}
-+
-+/* Resets a BMU block.
-+ * @param[in] base	BMU block base address
-+ */
-+void bmu_reset(void *base)
-+{
-+	writel(CORE_SW_RESET, base + BMU_CTRL);
-+
-+	/* Wait for self clear */
-+	while (readl(base + BMU_CTRL) & CORE_SW_RESET)
-+		;
-+}
-+
-+/* Enabled a BMU block.
-+ * @param[in] base	BMU block base address
-+ */
-+void bmu_enable(void *base)
-+{
-+	writel(CORE_ENABLE, base + BMU_CTRL);
-+}
-+
-+/* Disables a BMU block.
-+ * @param[in] base	BMU block base address
-+ */
-+void bmu_disable(void *base)
-+{
-+	writel(CORE_DISABLE, base + BMU_CTRL);
-+}
-+
-+/* Sets the configuration of a BMU block.
-+ * @param[in] base	BMU block base address
-+ * @param[in] cfg	BMU configuration
-+ */
-+void bmu_set_config(void *base, struct BMU_CFG *cfg)
-+{
-+	writel(cfg->baseaddr, base + BMU_UCAST_BASE_ADDR);
-+	writel(cfg->count & 0xffff, base + BMU_UCAST_CONFIG);
-+	writel(cfg->size & 0xffff, base + BMU_BUF_SIZE);
-+
-+	/* Interrupts are never used */
-+	writel(cfg->low_watermark, base + BMU_LOW_WATERMARK);
-+	writel(cfg->high_watermark, base + BMU_HIGH_WATERMARK);
-+	writel(0x0, base + BMU_INT_ENABLE);
-+}
-+
-+/**************************** MTIP GEMAC ***************************/
-+
-+/* Enable Rx Checksum Engine. With this enabled, Frame with bad IP,
-+ *   TCP or UDP checksums are discarded
-+ *
-+ * @param[in] base	GEMAC base address.
-+ */
-+void gemac_enable_rx_checksum_offload(void *base)
-+{
-+	/*Do not find configuration to do this */
-+}
-+
-+/* Disable Rx Checksum Engine.
-+ *
-+ * @param[in] base	GEMAC base address.
-+ */
-+void gemac_disable_rx_checksum_offload(void *base)
-+{
-+	/*Do not find configuration to do this */
-+}
-+
-+/* GEMAC set speed.
-+ * @param[in] base	GEMAC base address
-+ * @param[in] speed	GEMAC speed (10, 100 or 1000 Mbps)
-+ */
-+void gemac_set_speed(void *base, enum mac_speed gem_speed)
-+{
-+	u32 ecr = readl(base + EMAC_ECNTRL_REG) & ~EMAC_ECNTRL_SPEED;
-+	u32 rcr = readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_RMII_10T;
-+
-+	switch (gem_speed) {
-+	case SPEED_10M:
-+			rcr |= EMAC_RCNTRL_RMII_10T;
-+			break;
-+
-+	case SPEED_1000M:
-+			ecr |= EMAC_ECNTRL_SPEED;
-+			break;
-+
-+	case SPEED_100M:
-+	default:
-+			/*It is in 100M mode */
-+			break;
-+	}
-+	writel(ecr, (base + EMAC_ECNTRL_REG));
-+	writel(rcr, (base + EMAC_RCNTRL_REG));
-+}
-+
-+/* GEMAC set duplex.
-+ * @param[in] base	GEMAC base address
-+ * @param[in] duplex	GEMAC duplex mode (Full, Half)
-+ */
-+void gemac_set_duplex(void *base, int duplex)
-+{
-+	if (duplex == DUPLEX_HALF) {
-+		writel(readl(base + EMAC_TCNTRL_REG) & ~EMAC_TCNTRL_FDEN, base
-+			+ EMAC_TCNTRL_REG);
-+		writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_DRT, (base
-+			+ EMAC_RCNTRL_REG));
-+	} else{
-+		writel(readl(base + EMAC_TCNTRL_REG) | EMAC_TCNTRL_FDEN, base
-+			+ EMAC_TCNTRL_REG);
-+		writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_DRT, (base
-+			+ EMAC_RCNTRL_REG));
-+	}
-+}
-+
-+/* GEMAC set mode.
-+ * @param[in] base	GEMAC base address
-+ * @param[in] mode	GEMAC operation mode (MII, RMII, RGMII, SGMII)
-+ */
-+void gemac_set_mode(void *base, int mode)
-+{
-+	u32 val = readl(base + EMAC_RCNTRL_REG);
-+
-+	/*Remove loopbank*/
-+	val &= ~EMAC_RCNTRL_LOOP;
-+
-+	/* Enable flow control and MII mode.PFE firmware always expects
-+       CRC should be forwarded by MAC to validate CRC in software.*/
-+	val |= (EMAC_RCNTRL_FCE | EMAC_RCNTRL_MII_MODE);
-+
-+	writel(val, base + EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC enable function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_enable(void *base)
-+{
-+	writel(readl(base + EMAC_ECNTRL_REG) | EMAC_ECNTRL_ETHER_EN, base +
-+		EMAC_ECNTRL_REG);
-+}
-+
-+/* GEMAC disable function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_disable(void *base)
-+{
-+	writel(readl(base + EMAC_ECNTRL_REG) & ~EMAC_ECNTRL_ETHER_EN, base +
-+		EMAC_ECNTRL_REG);
-+}
-+
-+/* GEMAC TX disable function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_tx_disable(void *base)
-+{
-+	writel(readl(base + EMAC_TCNTRL_REG) | EMAC_TCNTRL_GTS, base +
-+		EMAC_TCNTRL_REG);
-+}
-+
-+void gemac_tx_enable(void *base)
-+{
-+	writel(readl(base + EMAC_TCNTRL_REG) & ~EMAC_TCNTRL_GTS, base +
-+			EMAC_TCNTRL_REG);
-+}
-+
-+/* Sets the hash register of the MAC.
-+ * This register is used for matching unicast and multicast frames.
-+ *
-+ * @param[in] base	GEMAC base address.
-+ * @param[in] hash	64-bit hash to be configured.
-+ */
-+void gemac_set_hash(void *base, struct pfe_mac_addr *hash)
-+{
-+	writel(hash->bottom,  base + EMAC_GALR);
-+	writel(hash->top, base + EMAC_GAUR);
-+}
-+
-+void gemac_set_laddrN(void *base, struct pfe_mac_addr *address,
-+		      unsigned int entry_index)
-+{
-+	if ((entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX))
-+		return;
-+
-+	entry_index = entry_index - 1;
-+	if (entry_index < 1) {
-+		writel(htonl(address->bottom),  base + EMAC_PHY_ADDR_LOW);
-+		writel((htonl(address->top) | 0x8808), base +
-+			EMAC_PHY_ADDR_HIGH);
-+	} else {
-+		writel(htonl(address->bottom),  base + ((entry_index - 1) * 8)
-+			+ EMAC_SMAC_0_0);
-+		writel((htonl(address->top) | 0x8808), base + ((entry_index -
-+			1) * 8) + EMAC_SMAC_0_1);
-+	}
-+}
-+
-+void gemac_clear_laddrN(void *base, unsigned int entry_index)
-+{
-+	if ((entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX))
-+		return;
-+
-+	entry_index = entry_index - 1;
-+	if (entry_index < 1) {
-+		writel(0, base + EMAC_PHY_ADDR_LOW);
-+		writel(0, base + EMAC_PHY_ADDR_HIGH);
-+	} else {
-+		writel(0,  base + ((entry_index - 1) * 8) + EMAC_SMAC_0_0);
-+		writel(0, base + ((entry_index - 1) * 8) + EMAC_SMAC_0_1);
-+	}
-+}
-+
-+/* Set the loopback mode of the MAC.  This can be either no loopback for
-+ * normal operation, local loopback through MAC internal loopback module or PHY
-+ *   loopback for external loopback through a PHY.  This asserts the external
-+ * loop pin.
-+ *
-+ * @param[in] base	GEMAC base address.
-+ * @param[in] gem_loop	Loopback mode to be enabled. LB_LOCAL - MAC
-+ * Loopback,
-+ *			LB_EXT - PHY Loopback.
-+ */
-+void gemac_set_loop(void *base, enum mac_loop gem_loop)
-+{
-+	pr_info("%s()\n", __func__);
-+	writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_LOOP, (base +
-+		EMAC_RCNTRL_REG));
-+}
-+
-+/* GEMAC allow frames
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_enable_copy_all(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_PROM, (base +
-+		EMAC_RCNTRL_REG));
-+}
-+
-+/* GEMAC do not allow frames
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_disable_copy_all(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_PROM, (base +
-+		EMAC_RCNTRL_REG));
-+}
-+
-+/* GEMAC allow broadcast function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_allow_broadcast(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_BC_REJ, base +
-+		EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC no broadcast function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_no_broadcast(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_BC_REJ, base +
-+		EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC enable 1536 rx function.
-+ * @param[in]	base	GEMAC base address
-+ */
-+void gemac_enable_1536_rx(void *base)
-+{
-+	/* Set 1536 as Maximum frame length */
-+	writel((readl(base + EMAC_RCNTRL_REG) & PFE_RCR_MAX_FL_MASK)
-+		| (1536 << 16), base +	EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC set rx Max frame length.
-+ * @param[in]	base	GEMAC base address
-+ * @param[in]	mtu	new mtu
-+ */
-+void gemac_set_rx_max_fl(void *base, int mtu)
-+{
-+	/* Set mtu as Maximum frame length */
-+	writel((readl(base + EMAC_RCNTRL_REG) & PFE_RCR_MAX_FL_MASK)
-+		| (mtu << 16), base + EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC enable stacked vlan function.
-+ * @param[in]	base	GEMAC base address
-+ */
-+void gemac_enable_stacked_vlan(void *base)
-+{
-+	/* MTIP doesn't support stacked vlan */
-+}
-+
-+/* GEMAC enable pause rx function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_enable_pause_rx(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_FCE,
-+	       base + EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC disable pause rx function.
-+ * @param[in] base	GEMAC base address
-+ */
-+void gemac_disable_pause_rx(void *base)
-+{
-+	writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_FCE,
-+	       base + EMAC_RCNTRL_REG);
-+}
-+
-+/* GEMAC enable pause tx function.
-+ * @param[in] base GEMAC base address
-+ */
-+void gemac_enable_pause_tx(void *base)
-+{
-+	writel(EMAC_RX_SECTION_EMPTY_V, base + EMAC_RX_SECTION_EMPTY);
-+}
-+
-+/* GEMAC disable pause tx function.
-+ * @param[in] base GEMAC base address
-+ */
-+void gemac_disable_pause_tx(void *base)
-+{
-+	writel(0x0, base + EMAC_RX_SECTION_EMPTY);
-+}
-+
-+/* GEMAC wol configuration
-+ * @param[in] base	GEMAC base address
-+ * @param[in] wol_conf	WoL register configuration
-+ */
-+void gemac_set_wol(void *base, u32 wol_conf)
-+{
-+	u32  val = readl(base + EMAC_ECNTRL_REG);
-+
-+	if (wol_conf)
-+		val |= (EMAC_ECNTRL_MAGIC_ENA | EMAC_ECNTRL_SLEEP);
-+	else
-+		val &= ~(EMAC_ECNTRL_MAGIC_ENA | EMAC_ECNTRL_SLEEP);
-+	writel(val, base + EMAC_ECNTRL_REG);
-+}
-+
-+/* Sets Gemac bus width to 64bit
-+ * @param[in] base       GEMAC base address
-+ * @param[in] width     gemac bus width to be set possible values are 32/64/128
-+ */
-+void gemac_set_bus_width(void *base, int width)
-+{
-+}
-+
-+/* Sets Gemac configuration.
-+ * @param[in] base	GEMAC base address
-+ * @param[in] cfg	GEMAC configuration
-+ */
-+void gemac_set_config(void *base, struct gemac_cfg *cfg)
-+{
-+	/*GEMAC config taken from VLSI */
-+	writel(0x00000004, base + EMAC_TFWR_STR_FWD);
-+	writel(0x00000005, base + EMAC_RX_SECTION_FULL);
-+
-+	if (pfe_errata_a010897)
-+		writel(0x0000076c, base + EMAC_TRUNC_FL);
-+	else
-+		writel(0x00003fff, base + EMAC_TRUNC_FL);
-+
-+	writel(0x00000030, base + EMAC_TX_SECTION_EMPTY);
-+	writel(0x00000000, base + EMAC_MIB_CTRL_STS_REG);
-+
-+	gemac_set_mode(base, cfg->mode);
-+
-+	gemac_set_speed(base, cfg->speed);
-+
-+	gemac_set_duplex(base, cfg->duplex);
-+}
-+
-+/**************************** GPI ***************************/
-+
-+/* Initializes a GPI block.
-+ * @param[in] base	GPI base address
-+ * @param[in] cfg	GPI configuration
-+ */
-+void gpi_init(void *base, struct gpi_cfg *cfg)
-+{
-+	gpi_reset(base);
-+
-+	gpi_disable(base);
-+
-+	gpi_set_config(base, cfg);
-+}
-+
-+/* Resets a GPI block.
-+ * @param[in] base	GPI base address
-+ */
-+void gpi_reset(void *base)
-+{
-+	writel(CORE_SW_RESET, base + GPI_CTRL);
-+}
-+
-+/* Enables a GPI block.
-+ * @param[in] base	GPI base address
-+ */
-+void gpi_enable(void *base)
-+{
-+	writel(CORE_ENABLE, base + GPI_CTRL);
-+}
-+
-+/* Disables a GPI block.
-+ * @param[in] base	GPI base address
-+ */
-+void gpi_disable(void *base)
-+{
-+	writel(CORE_DISABLE, base + GPI_CTRL);
-+}
-+
-+/* Sets the configuration of a GPI block.
-+ * @param[in] base	GPI base address
-+ * @param[in] cfg	GPI configuration
-+ */
-+void gpi_set_config(void *base, struct gpi_cfg *cfg)
-+{
-+	writel(CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_ALLOC_CTRL),	base
-+		+ GPI_LMEM_ALLOC_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_FREE_CTRL),	base
-+		+ GPI_LMEM_FREE_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_ALLOC_CTRL),	base
-+		+ GPI_DDR_ALLOC_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_FREE_CTRL),	base
-+		+ GPI_DDR_FREE_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(CLASS_INQ_PKTPTR), base + GPI_CLASS_ADDR);
-+	writel(DDR_HDR_SIZE, base + GPI_DDR_DATA_OFFSET);
-+	writel(LMEM_HDR_SIZE, base + GPI_LMEM_DATA_OFFSET);
-+	writel(0, base + GPI_LMEM_SEC_BUF_DATA_OFFSET);
-+	writel(0, base + GPI_DDR_SEC_BUF_DATA_OFFSET);
-+	writel((DDR_HDR_SIZE << 16) |	LMEM_HDR_SIZE,	base + GPI_HDR_SIZE);
-+	writel((DDR_BUF_SIZE << 16) |	LMEM_BUF_SIZE,	base + GPI_BUF_SIZE);
-+
-+	writel(((cfg->lmem_rtry_cnt << 16) | (GPI_DDR_BUF_EN << 1) |
-+		GPI_LMEM_BUF_EN), base + GPI_RX_CONFIG);
-+	writel(cfg->tmlf_txthres, base + GPI_TMLF_TX);
-+	writel(cfg->aseq_len,	base + GPI_DTX_ASEQ);
-+	writel(1, base + GPI_TOE_CHKSUM_EN);
-+
-+	if (cfg->mtip_pause_reg) {
-+		writel(cfg->mtip_pause_reg, base + GPI_CSR_MTIP_PAUSE_REG);
-+		writel(EGPI_PAUSE_TIME, base + GPI_TX_PAUSE_TIME);
-+	}
-+}
-+
-+/**************************** CLASSIFIER ***************************/
-+
-+/* Initializes CLASSIFIER block.
-+ * @param[in] cfg	CLASSIFIER configuration
-+ */
-+void class_init(struct class_cfg *cfg)
-+{
-+	class_reset();
-+
-+	class_disable();
-+
-+	class_set_config(cfg);
-+}
-+
-+/* Resets CLASSIFIER block.
-+ *
-+ */
-+void class_reset(void)
-+{
-+	writel(CORE_SW_RESET, CLASS_TX_CTRL);
-+}
-+
-+/* Enables all CLASS-PE's cores.
-+ *
-+ */
-+void class_enable(void)
-+{
-+	writel(CORE_ENABLE, CLASS_TX_CTRL);
-+}
-+
-+/* Disables all CLASS-PE's cores.
-+ *
-+ */
-+void class_disable(void)
-+{
-+	writel(CORE_DISABLE, CLASS_TX_CTRL);
-+}
-+
-+/*
-+ * Sets the configuration of the CLASSIFIER block.
-+ * @param[in] cfg	CLASSIFIER configuration
-+ */
-+void class_set_config(struct class_cfg *cfg)
-+{
-+	u32 val;
-+
-+	/* Initialize route table */
-+	if (!cfg->resume)
-+		memset(DDR_PHYS_TO_VIRT(cfg->route_table_baseaddr), 0, (1 <<
-+		cfg->route_table_hash_bits) * CLASS_ROUTE_SIZE);
-+
-+#if !defined(LS1012A_PFE_RESET_WA)
-+	writel(cfg->pe_sys_clk_ratio,	CLASS_PE_SYS_CLK_RATIO);
-+#endif
-+
-+	writel((DDR_HDR_SIZE << 16) | LMEM_HDR_SIZE,	CLASS_HDR_SIZE);
-+	writel(LMEM_BUF_SIZE,				CLASS_LMEM_BUF_SIZE);
-+	writel(CLASS_ROUTE_ENTRY_SIZE(CLASS_ROUTE_SIZE) |
-+		CLASS_ROUTE_HASH_SIZE(cfg->route_table_hash_bits),
-+		CLASS_ROUTE_HASH_ENTRY_SIZE);
-+	writel(HIF_PKT_CLASS_EN | HIF_PKT_OFFSET(sizeof(struct hif_hdr)),
-+	       CLASS_HIF_PARSE);
-+
-+	val = HASH_CRC_PORT_IP | QB2BUS_LE;
-+
-+#if defined(CONFIG_IP_ALIGNED)
-+	val |= IP_ALIGNED;
-+#endif
-+
-+	/*
-+	 *  Class PE packet steering will only work if TOE mode, bridge fetch or
-+	 * route fetch are enabled (see class/qb_fet.v). Route fetch would
-+	 * trigger additional memory copies (likely from DDR because of hash
-+	 * table size, which cannot be reduced because PE software still
-+	 * relies on hash value computed in HW), so when not in TOE mode we
-+	 * simply enable HW bridge fetch even though we don't use it.
-+	 */
-+	if (cfg->toe_mode)
-+		val |= CLASS_TOE;
-+	else
-+		val |= HW_BRIDGE_FETCH;
-+
-+	writel(val, CLASS_ROUTE_MULTI);
-+
-+	writel(DDR_PHYS_TO_PFE(cfg->route_table_baseaddr),
-+	       CLASS_ROUTE_TABLE_BASE);
-+	writel(CLASS_PE0_RO_DM_ADDR0_VAL,		CLASS_PE0_RO_DM_ADDR0);
-+	writel(CLASS_PE0_RO_DM_ADDR1_VAL,		CLASS_PE0_RO_DM_ADDR1);
-+	writel(CLASS_PE0_QB_DM_ADDR0_VAL,		CLASS_PE0_QB_DM_ADDR0);
-+	writel(CLASS_PE0_QB_DM_ADDR1_VAL,		CLASS_PE0_QB_DM_ADDR1);
-+	writel(CBUS_VIRT_TO_PFE(TMU_PHY_INQ_PKTPTR),	CLASS_TM_INQ_ADDR);
-+
-+	writel(23, CLASS_AFULL_THRES);
-+	writel(23, CLASS_TSQ_FIFO_THRES);
-+
-+	writel(24, CLASS_MAX_BUF_CNT);
-+	writel(24, CLASS_TSQ_MAX_CNT);
-+}
-+
-+/**************************** TMU ***************************/
-+
-+void tmu_reset(void)
-+{
-+	writel(SW_RESET, TMU_CTRL);
-+}
-+
-+/* Initializes TMU block.
-+ * @param[in] cfg	TMU configuration
-+ */
-+void tmu_init(struct tmu_cfg *cfg)
-+{
-+	int q, phyno;
-+
-+	tmu_disable(0xF);
-+	mdelay(10);
-+
-+#if !defined(LS1012A_PFE_RESET_WA)
-+	/* keep in soft reset */
-+	writel(SW_RESET, TMU_CTRL);
-+#endif
-+	writel(0x3, TMU_SYS_GENERIC_CONTROL);
-+	writel(750, TMU_INQ_WATERMARK);
-+	writel(CBUS_VIRT_TO_PFE(EGPI1_BASE_ADDR +
-+		GPI_INQ_PKTPTR),	TMU_PHY0_INQ_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(EGPI2_BASE_ADDR +
-+		GPI_INQ_PKTPTR),	TMU_PHY1_INQ_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(HGPI_BASE_ADDR +
-+		GPI_INQ_PKTPTR),	TMU_PHY3_INQ_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(HIF_NOCPY_RX_INQ0_PKTPTR), TMU_PHY4_INQ_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(UTIL_INQ_PKTPTR), TMU_PHY5_INQ_ADDR);
-+	writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_FREE_CTRL),
-+	       TMU_BMU_INQ_ADDR);
-+
-+	writel(0x3FF,	TMU_TDQ0_SCH_CTRL);	/*
-+						 * enabling all 10
-+						 * schedulers [9:0] of each TDQ
-+						 */
-+	writel(0x3FF,	TMU_TDQ1_SCH_CTRL);
-+	writel(0x3FF,	TMU_TDQ3_SCH_CTRL);
-+
-+#if !defined(LS1012A_PFE_RESET_WA)
-+	writel(cfg->pe_sys_clk_ratio,	TMU_PE_SYS_CLK_RATIO);
-+#endif
-+
-+#if !defined(LS1012A_PFE_RESET_WA)
-+	writel(DDR_PHYS_TO_PFE(cfg->llm_base_addr),	TMU_LLM_BASE_ADDR);
-+	/* Extra packet pointers will be stored from this address onwards */
-+
-+	writel(cfg->llm_queue_len,	TMU_LLM_QUE_LEN);
-+	writel(5,			TMU_TDQ_IIFG_CFG);
-+	writel(DDR_BUF_SIZE,		TMU_BMU_BUF_SIZE);
-+
-+	writel(0x0,			TMU_CTRL);
-+
-+	/* MEM init */
-+	pr_info("%s: mem init\n", __func__);
-+	writel(MEM_INIT,	TMU_CTRL);
-+
-+	while (!(readl(TMU_CTRL) & MEM_INIT_DONE))
-+		;
-+
-+	/* LLM init */
-+	pr_info("%s: lmem init\n", __func__);
-+	writel(LLM_INIT,	TMU_CTRL);
-+
-+	while (!(readl(TMU_CTRL) & LLM_INIT_DONE))
-+		;
-+#endif
-+	/* set up each queue for tail drop */
-+	for (phyno = 0; phyno < 4; phyno++) {
-+		if (phyno == 2)
-+			continue;
-+		for (q = 0; q < 16; q++) {
-+			u32 qdepth;
-+
-+			writel((phyno << 8) | q, TMU_TEQ_CTRL);
-+			writel(1 << 22, TMU_TEQ_QCFG); /*Enable tail drop */
-+
-+			if (phyno == 3)
-+				qdepth = DEFAULT_TMU3_QDEPTH;
-+			else
-+				qdepth = (q == 0) ? DEFAULT_Q0_QDEPTH :
-+						DEFAULT_MAX_QDEPTH;
-+
-+			/* LOG: 68855 */
-+			/*
-+			 * The following is a workaround for the reordered
-+			 * packet and BMU2 buffer leakage issue.
-+			 */
-+			if (CHIP_REVISION() == 0)
-+				qdepth = 31;
-+
-+			writel(qdepth << 18, TMU_TEQ_HW_PROB_CFG2);
-+			writel(qdepth >> 14, TMU_TEQ_HW_PROB_CFG3);
-+		}
-+	}
-+
-+#ifdef CFG_LRO
-+	/* Set TMU-3 queue 5 (LRO) in no-drop mode */
-+	writel((3 << 8) | TMU_QUEUE_LRO, TMU_TEQ_CTRL);
-+	writel(0, TMU_TEQ_QCFG);
-+#endif
-+
-+	writel(0x05, TMU_TEQ_DISABLE_DROPCHK);
-+
-+	writel(0x0, TMU_CTRL);
-+}
-+
-+/* Enables TMU-PE cores.
-+ * @param[in] pe_mask	TMU PE mask
-+ */
-+void tmu_enable(u32 pe_mask)
-+{
-+	writel(readl(TMU_TX_CTRL) | (pe_mask & 0xF), TMU_TX_CTRL);
-+}
-+
-+/* Disables TMU cores.
-+ * @param[in] pe_mask	TMU PE mask
-+ */
-+void tmu_disable(u32 pe_mask)
-+{
-+	writel(readl(TMU_TX_CTRL) & ~(pe_mask & 0xF), TMU_TX_CTRL);
-+}
-+
-+/* This will return the tmu queue status
-+ * @param[in] if_id	gem interface id or TMU index
-+ * @return		returns the bit mask of busy queues, zero means all
-+ * queues are empty
-+ */
-+u32 tmu_qstatus(u32 if_id)
-+{
-+	return cpu_to_be32(pe_dmem_read(TMU0_ID + if_id, TMU_DM_PESTATUS +
-+		offsetof(struct pe_status, tmu_qstatus), 4));
-+}
-+
-+u32 tmu_pkts_processed(u32 if_id)
-+{
-+	return cpu_to_be32(pe_dmem_read(TMU0_ID + if_id, TMU_DM_PESTATUS +
-+		offsetof(struct pe_status, rx), 4));
-+}
-+
-+/**************************** UTIL ***************************/
-+
-+/* Resets UTIL block.
-+ */
-+void util_reset(void)
-+{
-+	writel(CORE_SW_RESET, UTIL_TX_CTRL);
-+}
-+
-+/* Initializes UTIL block.
-+ * @param[in] cfg	UTIL configuration
-+ */
-+void util_init(struct util_cfg *cfg)
-+{
-+	writel(cfg->pe_sys_clk_ratio,   UTIL_PE_SYS_CLK_RATIO);
-+}
-+
-+/* Enables UTIL-PE core.
-+ *
-+ */
-+void util_enable(void)
-+{
-+	writel(CORE_ENABLE, UTIL_TX_CTRL);
-+}
-+
-+/* Disables UTIL-PE core.
-+ *
-+ */
-+void util_disable(void)
-+{
-+	writel(CORE_DISABLE, UTIL_TX_CTRL);
-+}
-+
-+/**************************** HIF ***************************/
-+/* Initializes HIF copy block.
-+ *
-+ */
-+void hif_init(void)
-+{
-+	/*Initialize HIF registers*/
-+	writel((HIF_RX_POLL_CTRL_CYCLE << 16) | HIF_TX_POLL_CTRL_CYCLE,
-+	       HIF_POLL_CTRL);
-+}
-+
-+/* Enable hif tx DMA and interrupt
-+ *
-+ */
-+void hif_tx_enable(void)
-+{
-+	writel(HIF_CTRL_DMA_EN, HIF_TX_CTRL);
-+	writel((readl(HIF_INT_ENABLE) | HIF_INT_EN | HIF_TXPKT_INT_EN),
-+	       HIF_INT_ENABLE);
-+}
-+
-+/* Disable hif tx DMA and interrupt
-+ *
-+ */
-+void hif_tx_disable(void)
-+{
-+	u32	hif_int;
-+
-+	writel(0, HIF_TX_CTRL);
-+
-+	hif_int = readl(HIF_INT_ENABLE);
-+	hif_int &= HIF_TXPKT_INT_EN;
-+	writel(hif_int, HIF_INT_ENABLE);
-+}
-+
-+/* Enable hif rx DMA and interrupt
-+ *
-+ */
-+void hif_rx_enable(void)
-+{
-+	hif_rx_dma_start();
-+	writel((readl(HIF_INT_ENABLE) | HIF_INT_EN | HIF_RXPKT_INT_EN),
-+	       HIF_INT_ENABLE);
-+}
-+
-+/* Disable hif rx DMA and interrupt
-+ *
-+ */
-+void hif_rx_disable(void)
-+{
-+	u32	hif_int;
-+
-+	writel(0, HIF_RX_CTRL);
-+
-+	hif_int = readl(HIF_INT_ENABLE);
-+	hif_int &= HIF_RXPKT_INT_EN;
-+	writel(hif_int, HIF_INT_ENABLE);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hif.c
-@@ -0,0 +1,1064 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/sched.h>
-+#include <linux/module.h>
-+#include <linux/list.h>
-+#include <linux/kthread.h>
-+#include <linux/slab.h>
-+
-+#include <linux/io.h>
-+#include <asm/irq.h>
-+
-+#include "pfe_mod.h"
-+
-+#define HIF_INT_MASK	(HIF_INT | HIF_RXPKT_INT | HIF_TXPKT_INT)
-+
-+unsigned char napi_first_batch;
-+
-+static void pfe_tx_do_cleanup(unsigned long data);
-+
-+static int pfe_hif_alloc_descr(struct pfe_hif *hif)
-+{
-+	void *addr;
-+	dma_addr_t dma_addr;
-+	int err = 0;
-+
-+	pr_info("%s\n", __func__);
-+	addr = dma_alloc_coherent(pfe->dev,
-+				  HIF_RX_DESC_NT * sizeof(struct hif_desc) +
-+				  HIF_TX_DESC_NT * sizeof(struct hif_desc),
-+				  &dma_addr, GFP_KERNEL);
-+
-+	if (!addr) {
-+		pr_err("%s: Could not allocate buffer descriptors!\n"
-+			, __func__);
-+		err = -ENOMEM;
-+		goto err0;
-+	}
-+
-+	hif->descr_baseaddr_p = dma_addr;
-+	hif->descr_baseaddr_v = addr;
-+	hif->rx_ring_size = HIF_RX_DESC_NT;
-+	hif->tx_ring_size = HIF_TX_DESC_NT;
-+
-+	return 0;
-+
-+err0:
-+	return err;
-+}
-+
-+#if defined(LS1012A_PFE_RESET_WA)
-+static void pfe_hif_disable_rx_desc(struct pfe_hif *hif)
-+{
-+	int ii;
-+	struct hif_desc	*desc = hif->rx_base;
-+
-+	/*Mark all descriptors as LAST_BD */
-+	for (ii = 0; ii < hif->rx_ring_size; ii++) {
-+		desc->ctrl |= BD_CTRL_LAST_BD;
-+		desc++;
-+	}
-+}
-+
-+struct class_rx_hdr_t {
-+	u32     next_ptr;       /* ptr to the start of the first DDR buffer */
-+	u16     length;         /* total packet length */
-+	u16     phyno;          /* input physical port number */
-+	u32     status;         /* gemac status bits */
-+	u32     status2;            /* reserved for software usage */
-+};
-+
-+/* STATUS_BAD_FRAME_ERR is set for all errors (including checksums if enabled)
-+ * except overflow
-+ */
-+#define STATUS_BAD_FRAME_ERR            BIT(16)
-+#define STATUS_LENGTH_ERR               BIT(17)
-+#define STATUS_CRC_ERR                  BIT(18)
-+#define STATUS_TOO_SHORT_ERR            BIT(19)
-+#define STATUS_TOO_LONG_ERR             BIT(20)
-+#define STATUS_CODE_ERR                 BIT(21)
-+#define STATUS_MC_HASH_MATCH            BIT(22)
-+#define STATUS_CUMULATIVE_ARC_HIT       BIT(23)
-+#define STATUS_UNICAST_HASH_MATCH       BIT(24)
-+#define STATUS_IP_CHECKSUM_CORRECT      BIT(25)
-+#define STATUS_TCP_CHECKSUM_CORRECT     BIT(26)
-+#define STATUS_UDP_CHECKSUM_CORRECT     BIT(27)
-+#define STATUS_OVERFLOW_ERR             BIT(28) /* GPI error */
-+#define MIN_PKT_SIZE			64
-+
-+static inline void copy_to_lmem(u32 *dst, u32 *src, int len)
-+{
-+	int i;
-+
-+	for (i = 0; i < len; i += sizeof(u32))	{
-+		*dst = htonl(*src);
-+		dst++; src++;
-+	}
-+}
-+
-+static void send_dummy_pkt_to_hif(void)
-+{
-+	void *lmem_ptr, *ddr_ptr, *lmem_virt_addr;
-+	u32 physaddr;
-+	struct class_rx_hdr_t local_hdr;
-+	static u32 dummy_pkt[] =  {
-+		0x33221100, 0x2b785544, 0xd73093cb, 0x01000608,
-+		0x04060008, 0x2b780200, 0xd73093cb, 0x0a01a8c0,
-+		0x33221100, 0xa8c05544, 0x00000301, 0x00000000,
-+		0x00000000, 0x00000000, 0x00000000, 0xbe86c51f };
-+
-+	ddr_ptr = (void *)((u64)readl(BMU2_BASE_ADDR + BMU_ALLOC_CTRL));
-+	if (!ddr_ptr)
-+		return;
-+
-+	lmem_ptr = (void *)((u64)readl(BMU1_BASE_ADDR + BMU_ALLOC_CTRL));
-+	if (!lmem_ptr)
-+		return;
-+
-+	pr_info("Sending a dummy pkt to HIF %p %p\n", ddr_ptr, lmem_ptr);
-+	physaddr = (u32)DDR_VIRT_TO_PFE(ddr_ptr);
-+
-+	lmem_virt_addr = (void *)CBUS_PFE_TO_VIRT((unsigned long int)lmem_ptr);
-+
-+	local_hdr.phyno = htons(0); /* RX_PHY_0 */
-+	local_hdr.length = htons(MIN_PKT_SIZE);
-+
-+	local_hdr.next_ptr = htonl((u32)physaddr);
-+	/*Mark checksum is correct */
-+	local_hdr.status = htonl((STATUS_IP_CHECKSUM_CORRECT |
-+				STATUS_UDP_CHECKSUM_CORRECT |
-+				STATUS_TCP_CHECKSUM_CORRECT |
-+				STATUS_UNICAST_HASH_MATCH |
-+				STATUS_CUMULATIVE_ARC_HIT));
-+	local_hdr.status2 = 0;
-+
-+	copy_to_lmem((u32 *)lmem_virt_addr, (u32 *)&local_hdr,
-+		     sizeof(local_hdr));
-+
-+	copy_to_lmem((u32 *)(lmem_virt_addr + LMEM_HDR_SIZE), (u32 *)dummy_pkt,
-+		     0x40);
-+
-+	writel((unsigned long int)lmem_ptr, CLASS_INQ_PKTPTR);
-+}
-+
-+void pfe_hif_rx_idle(struct pfe_hif *hif)
-+{
-+	int hif_stop_loop = 10;
-+	u32 rx_status;
-+
-+	pfe_hif_disable_rx_desc(hif);
-+	pr_info("Bringing hif to idle state...");
-+	writel(0, HIF_INT_ENABLE);
-+	/*If HIF Rx BDP is busy send a dummy packet */
-+	do {
-+		rx_status = readl(HIF_RX_STATUS);
-+		if (rx_status & BDP_CSR_RX_DMA_ACTV)
-+			send_dummy_pkt_to_hif();
-+
-+		usleep_range(100, 150);
-+	} while (--hif_stop_loop);
-+
-+	if (readl(HIF_RX_STATUS) & BDP_CSR_RX_DMA_ACTV)
-+		pr_info("Failed\n");
-+	else
-+		pr_info("Done\n");
-+}
-+#endif
-+
-+static void pfe_hif_free_descr(struct pfe_hif *hif)
-+{
-+	pr_info("%s\n", __func__);
-+
-+	dma_free_coherent(pfe->dev,
-+			  hif->rx_ring_size * sizeof(struct hif_desc) +
-+			  hif->tx_ring_size * sizeof(struct hif_desc),
-+			  hif->descr_baseaddr_v, hif->descr_baseaddr_p);
-+}
-+
-+void pfe_hif_desc_dump(struct pfe_hif *hif)
-+{
-+	struct hif_desc	*desc;
-+	unsigned long desc_p;
-+	int ii = 0;
-+
-+	pr_info("%s\n", __func__);
-+
-+	desc = hif->rx_base;
-+	desc_p = (u32)((u64)desc - (u64)hif->descr_baseaddr_v +
-+			hif->descr_baseaddr_p);
-+
-+	pr_info("HIF Rx desc base %p physical %x\n", desc, (u32)desc_p);
-+	for (ii = 0; ii < hif->rx_ring_size; ii++) {
-+		pr_info("status: %08x, ctrl: %08x, data: %08x, next: %x\n",
-+			readl(&desc->status), readl(&desc->ctrl),
-+			readl(&desc->data), readl(&desc->next));
-+			desc++;
-+	}
-+
-+	desc = hif->tx_base;
-+	desc_p = ((u64)desc - (u64)hif->descr_baseaddr_v +
-+			hif->descr_baseaddr_p);
-+
-+	pr_info("HIF Tx desc base %p physical %x\n", desc, (u32)desc_p);
-+	for (ii = 0; ii < hif->tx_ring_size; ii++) {
-+		pr_info("status: %08x, ctrl: %08x, data: %08x, next: %x\n",
-+			readl(&desc->status), readl(&desc->ctrl),
-+			readl(&desc->data), readl(&desc->next));
-+		desc++;
-+	}
-+}
-+
-+/* pfe_hif_release_buffers */
-+static void pfe_hif_release_buffers(struct pfe_hif *hif)
-+{
-+	struct hif_desc	*desc;
-+	int i = 0;
-+
-+	hif->rx_base = hif->descr_baseaddr_v;
-+
-+	pr_info("%s\n", __func__);
-+
-+	/*Free Rx buffers */
-+	desc = hif->rx_base;
-+	for (i = 0; i < hif->rx_ring_size; i++) {
-+		if (readl(&desc->data)) {
-+			if ((i < hif->shm->rx_buf_pool_cnt) &&
-+			    (!hif->shm->rx_buf_pool[i])) {
-+				/*
-+				 * dma_unmap_single(hif->dev, desc->data,
-+				 * hif->rx_buf_len[i], DMA_FROM_DEVICE);
-+				 */
-+				dma_unmap_single(hif->dev,
-+						 DDR_PFE_TO_PHYS(
-+						 readl(&desc->data)),
-+						 hif->rx_buf_len[i],
-+						 DMA_FROM_DEVICE);
-+				hif->shm->rx_buf_pool[i] = hif->rx_buf_addr[i];
-+			} else {
-+				pr_err("%s: buffer pool already full\n"
-+					, __func__);
-+			}
-+		}
-+
-+		writel(0, &desc->data);
-+		writel(0, &desc->status);
-+		writel(0, &desc->ctrl);
-+		desc++;
-+	}
-+}
-+
-+/*
-+ * pfe_hif_init_buffers
-+ * This function initializes the HIF Rx/Tx ring descriptors and
-+ * initialize Rx queue with buffers.
-+ */
-+static int pfe_hif_init_buffers(struct pfe_hif *hif)
-+{
-+	struct hif_desc	*desc, *first_desc_p;
-+	u32 data;
-+	int i = 0;
-+
-+	pr_info("%s\n", __func__);
-+
-+	/* Check enough Rx buffers available in the shared memory */
-+	if (hif->shm->rx_buf_pool_cnt < hif->rx_ring_size)
-+		return -ENOMEM;
-+
-+	hif->rx_base = hif->descr_baseaddr_v;
-+	memset(hif->rx_base, 0, hif->rx_ring_size * sizeof(struct hif_desc));
-+
-+	/*Initialize Rx descriptors */
-+	desc = hif->rx_base;
-+	first_desc_p = (struct hif_desc *)hif->descr_baseaddr_p;
-+
-+	for (i = 0; i < hif->rx_ring_size; i++) {
-+		/* Initialize Rx buffers from the shared memory */
-+
-+		data = (u32)dma_map_single(hif->dev, hif->shm->rx_buf_pool[i],
-+				pfe_pkt_size, DMA_FROM_DEVICE);
-+		hif->rx_buf_addr[i] = hif->shm->rx_buf_pool[i];
-+		hif->rx_buf_len[i] = pfe_pkt_size;
-+		hif->shm->rx_buf_pool[i] = NULL;
-+
-+		if (likely(dma_mapping_error(hif->dev, data) == 0)) {
-+			writel(DDR_PHYS_TO_PFE(data), &desc->data);
-+		} else {
-+			pr_err("%s : low on mem\n",  __func__);
-+
-+			goto err;
-+		}
-+
-+		writel(0, &desc->status);
-+
-+		/*
-+		 * Ensure everything else is written to DDR before
-+		 * writing bd->ctrl
-+		 */
-+		wmb();
-+
-+		writel((BD_CTRL_PKT_INT_EN | BD_CTRL_LIFM
-+			| BD_CTRL_DIR | BD_CTRL_DESC_EN
-+			| BD_BUF_LEN(pfe_pkt_size)), &desc->ctrl);
-+
-+		/* Chain descriptors */
-+		writel((u32)DDR_PHYS_TO_PFE(first_desc_p + i + 1), &desc->next);
-+		desc++;
-+	}
-+
-+	/* Overwrite last descriptor to chain it to first one*/
-+	desc--;
-+	writel((u32)DDR_PHYS_TO_PFE(first_desc_p), &desc->next);
-+
-+	hif->rxtoclean_index = 0;
-+
-+	/*Initialize Rx buffer descriptor ring base address */
-+	writel(DDR_PHYS_TO_PFE(hif->descr_baseaddr_p), HIF_RX_BDP_ADDR);
-+
-+	hif->tx_base = hif->rx_base + hif->rx_ring_size;
-+	first_desc_p = (struct hif_desc *)hif->descr_baseaddr_p +
-+				hif->rx_ring_size;
-+	memset(hif->tx_base, 0, hif->tx_ring_size * sizeof(struct hif_desc));
-+
-+	/*Initialize tx descriptors */
-+	desc = hif->tx_base;
-+
-+	for (i = 0; i < hif->tx_ring_size; i++) {
-+		/* Chain descriptors */
-+		writel((u32)DDR_PHYS_TO_PFE(first_desc_p + i + 1), &desc->next);
-+		writel(0, &desc->ctrl);
-+		desc++;
-+	}
-+
-+	/* Overwrite last descriptor to chain it to first one */
-+	desc--;
-+	writel((u32)DDR_PHYS_TO_PFE(first_desc_p), &desc->next);
-+	hif->txavail = hif->tx_ring_size;
-+	hif->txtosend = 0;
-+	hif->txtoclean = 0;
-+	hif->txtoflush = 0;
-+
-+	/*Initialize Tx buffer descriptor ring base address */
-+	writel((u32)DDR_PHYS_TO_PFE(first_desc_p), HIF_TX_BDP_ADDR);
-+
-+	return 0;
-+
-+err:
-+	pfe_hif_release_buffers(hif);
-+	return -ENOMEM;
-+}
-+
-+/*
-+ * pfe_hif_client_register
-+ *
-+ * This function used to register a client driver with the HIF driver.
-+ *
-+ * Return value:
-+ * 0 - on Successful registration
-+ */
-+static int pfe_hif_client_register(struct pfe_hif *hif, u32 client_id,
-+				   struct hif_client_shm *client_shm)
-+{
-+	struct hif_client *client = &hif->client[client_id];
-+	u32 i, cnt;
-+	struct rx_queue_desc *rx_qbase;
-+	struct tx_queue_desc *tx_qbase;
-+	struct hif_rx_queue *rx_queue;
-+	struct hif_tx_queue *tx_queue;
-+	int err = 0;
-+
-+	pr_info("%s\n", __func__);
-+
-+	spin_lock_bh(&hif->tx_lock);
-+
-+	if (test_bit(client_id, &hif->shm->g_client_status[0])) {
-+		pr_err("%s: client %d already registered\n",
-+		       __func__, client_id);
-+		err = -1;
-+		goto unlock;
-+	}
-+
-+	memset(client, 0, sizeof(struct hif_client));
-+
-+	/* Initialize client Rx queues baseaddr, size */
-+
-+	cnt = CLIENT_CTRL_RX_Q_CNT(client_shm->ctrl);
-+	/* Check if client is requesting for more queues than supported */
-+	if (cnt > HIF_CLIENT_QUEUES_MAX)
-+		cnt = HIF_CLIENT_QUEUES_MAX;
-+
-+	client->rx_qn = cnt;
-+	rx_qbase = (struct rx_queue_desc *)client_shm->rx_qbase;
-+	for (i = 0; i < cnt; i++) {
-+		rx_queue = &client->rx_q[i];
-+		rx_queue->base = rx_qbase + i * client_shm->rx_qsize;
-+		rx_queue->size = client_shm->rx_qsize;
-+		rx_queue->write_idx = 0;
-+	}
-+
-+	/* Initialize client Tx queues baseaddr, size */
-+	cnt = CLIENT_CTRL_TX_Q_CNT(client_shm->ctrl);
-+
-+	/* Check if client is requesting for more queues than supported */
-+	if (cnt > HIF_CLIENT_QUEUES_MAX)
-+		cnt = HIF_CLIENT_QUEUES_MAX;
-+
-+	client->tx_qn = cnt;
-+	tx_qbase = (struct tx_queue_desc *)client_shm->tx_qbase;
-+	for (i = 0; i < cnt; i++) {
-+		tx_queue = &client->tx_q[i];
-+		tx_queue->base = tx_qbase + i * client_shm->tx_qsize;
-+		tx_queue->size = client_shm->tx_qsize;
-+		tx_queue->ack_idx = 0;
-+	}
-+
-+	set_bit(client_id, &hif->shm->g_client_status[0]);
-+
-+unlock:
-+	spin_unlock_bh(&hif->tx_lock);
-+
-+	return err;
-+}
-+
-+/*
-+ * pfe_hif_client_unregister
-+ *
-+ * This function used to unregister a client  from the HIF driver.
-+ *
-+ */
-+static void pfe_hif_client_unregister(struct pfe_hif *hif, u32 client_id)
-+{
-+	pr_info("%s\n", __func__);
-+
-+	/*
-+	 * Mark client as no longer available (which prevents further packet
-+	 * receive for this client)
-+	 */
-+	spin_lock_bh(&hif->tx_lock);
-+
-+	if (!test_bit(client_id, &hif->shm->g_client_status[0])) {
-+		pr_err("%s: client %d not registered\n", __func__,
-+		       client_id);
-+
-+		spin_unlock_bh(&hif->tx_lock);
-+		return;
-+	}
-+
-+	clear_bit(client_id, &hif->shm->g_client_status[0]);
-+
-+	spin_unlock_bh(&hif->tx_lock);
-+}
-+
-+/*
-+ * client_put_rxpacket-
-+ * This functions puts the Rx pkt  in the given client Rx queue.
-+ * It actually swap the Rx pkt in the client Rx descriptor buffer
-+ * and returns the free buffer from it.
-+ *
-+ * If the function returns NULL means client Rx queue is full and
-+ * packet couldn't send to client queue.
-+ */
-+static void *client_put_rxpacket(struct hif_rx_queue *queue, void *pkt, u32 len,
-+				 u32 flags, u32 client_ctrl, u32 *rem_len)
-+{
-+	void *free_pkt = NULL;
-+	struct rx_queue_desc *desc = queue->base + queue->write_idx;
-+
-+	if (readl(&desc->ctrl) & CL_DESC_OWN) {
-+		if (page_mode) {
-+			int rem_page_size = PAGE_SIZE -
-+					PRESENT_OFST_IN_PAGE(pkt);
-+			int cur_pkt_size = ROUND_MIN_RX_SIZE(len +
-+					pfe_pkt_headroom);
-+			*rem_len = (rem_page_size - cur_pkt_size);
-+			if (*rem_len) {
-+				free_pkt = pkt + cur_pkt_size;
-+				get_page(virt_to_page(free_pkt));
-+			} else {
-+				free_pkt = (void
-+				*)__get_free_page(GFP_ATOMIC | GFP_DMA_PFE);
-+				*rem_len = pfe_pkt_size;
-+			}
-+		} else {
-+			free_pkt = kmalloc(PFE_BUF_SIZE, GFP_ATOMIC |
-+					GFP_DMA_PFE);
-+			*rem_len = PFE_BUF_SIZE - pfe_pkt_headroom;
-+		}
-+
-+		if (free_pkt) {
-+			desc->data = pkt;
-+			desc->client_ctrl = client_ctrl;
-+			/*
-+			 * Ensure everything else is written to DDR before
-+			 * writing bd->ctrl
-+			 */
-+			smp_wmb();
-+			writel(CL_DESC_BUF_LEN(len) | flags, &desc->ctrl);
-+			queue->write_idx = (queue->write_idx + 1)
-+					    & (queue->size - 1);
-+
-+			free_pkt += pfe_pkt_headroom;
-+		}
-+	}
-+
-+	return free_pkt;
-+}
-+
-+/*
-+ * pfe_hif_rx_process-
-+ * This function does pfe hif rx queue processing.
-+ * Dequeue packet from Rx queue and send it to corresponding client queue
-+ */
-+static int pfe_hif_rx_process(struct pfe_hif *hif, int budget)
-+{
-+	struct hif_desc	*desc;
-+	struct hif_hdr *pkt_hdr;
-+	struct __hif_hdr hif_hdr;
-+	void *free_buf;
-+	int rtc, len, rx_processed = 0;
-+	struct __hif_desc local_desc;
-+	int flags;
-+	unsigned int desc_p;
-+	unsigned int buf_size = 0;
-+
-+	spin_lock_bh(&hif->lock);
-+
-+	rtc = hif->rxtoclean_index;
-+
-+	while (rx_processed < budget) {
-+		desc = hif->rx_base + rtc;
-+
-+		__memcpy12(&local_desc, desc);
-+
-+		/* ACK pending Rx interrupt */
-+		if (local_desc.ctrl & BD_CTRL_DESC_EN) {
-+			writel(HIF_INT | HIF_RXPKT_INT, HIF_INT_SRC);
-+
-+			if (rx_processed == 0) {
-+				if (napi_first_batch == 1) {
-+					desc_p = hif->descr_baseaddr_p +
-+					((unsigned long int)(desc) -
-+					(unsigned long
-+					int)hif->descr_baseaddr_v);
-+					napi_first_batch = 0;
-+				}
-+			}
-+
-+			__memcpy12(&local_desc, desc);
-+
-+			if (local_desc.ctrl & BD_CTRL_DESC_EN)
-+				break;
-+		}
-+
-+		napi_first_batch = 0;
-+
-+#ifdef HIF_NAPI_STATS
-+		hif->napi_counters[NAPI_DESC_COUNT]++;
-+#endif
-+		len = BD_BUF_LEN(local_desc.ctrl);
-+		/*
-+		 * dma_unmap_single(hif->dev, DDR_PFE_TO_PHYS(local_desc.data),
-+		 * hif->rx_buf_len[rtc], DMA_FROM_DEVICE);
-+		 */
-+		dma_unmap_single(hif->dev, DDR_PFE_TO_PHYS(local_desc.data),
-+				 hif->rx_buf_len[rtc], DMA_FROM_DEVICE);
-+
-+		pkt_hdr = (struct hif_hdr *)hif->rx_buf_addr[rtc];
-+
-+		/* Track last HIF header received */
-+		if (!hif->started) {
-+			hif->started = 1;
-+
-+			__memcpy8(&hif_hdr, pkt_hdr);
-+
-+			hif->qno = hif_hdr.hdr.q_num;
-+			hif->client_id = hif_hdr.hdr.client_id;
-+			hif->client_ctrl = (hif_hdr.hdr.client_ctrl1 << 16) |
-+						hif_hdr.hdr.client_ctrl;
-+			flags = CL_DESC_FIRST;
-+
-+		} else {
-+			flags = 0;
-+		}
-+
-+		if (local_desc.ctrl & BD_CTRL_LIFM)
-+			flags |= CL_DESC_LAST;
-+
-+		/* Check for valid client id and still registered */
-+		if ((hif->client_id >= HIF_CLIENTS_MAX) ||
-+		    !(test_bit(hif->client_id,
-+			&hif->shm->g_client_status[0]))) {
-+			printk_ratelimited("%s: packet with invalid client id %d q_num %d\n",
-+					   __func__,
-+					   hif->client_id,
-+					   hif->qno);
-+
-+			free_buf = pkt_hdr;
-+
-+			goto pkt_drop;
-+		}
-+
-+		/* Check to valid queue number */
-+		if (hif->client[hif->client_id].rx_qn <= hif->qno) {
-+			pr_info("%s: packet with invalid queue: %d\n"
-+				, __func__, hif->qno);
-+			hif->qno = 0;
-+		}
-+
-+		free_buf =
-+		client_put_rxpacket(&hif->client[hif->client_id].rx_q[hif->qno],
-+				    (void *)pkt_hdr, len, flags,
-+			hif->client_ctrl, &buf_size);
-+
-+		hif_lib_indicate_client(hif->client_id, EVENT_RX_PKT_IND,
-+					hif->qno);
-+
-+		if (unlikely(!free_buf)) {
-+#ifdef HIF_NAPI_STATS
-+			hif->napi_counters[NAPI_CLIENT_FULL_COUNT]++;
-+#endif
-+			/*
-+			 * If we want to keep in polling mode to retry later,
-+			 * we need to tell napi that we consumed
-+			 * the full budget or we will hit a livelock scenario.
-+			 * The core code keeps this napi instance
-+			 * at the head of the list and none of the other
-+			 * instances get to run
-+			 */
-+			rx_processed = budget;
-+
-+			if (flags & CL_DESC_FIRST)
-+				hif->started = 0;
-+
-+			break;
-+		}
-+
-+pkt_drop:
-+		/*Fill free buffer in the descriptor */
-+		hif->rx_buf_addr[rtc] = free_buf;
-+		hif->rx_buf_len[rtc] = min(pfe_pkt_size, buf_size);
-+		writel((DDR_PHYS_TO_PFE
-+			((u32)dma_map_single(hif->dev,
-+			free_buf, hif->rx_buf_len[rtc], DMA_FROM_DEVICE))),
-+			&desc->data);
-+		/*
-+		 * Ensure everything else is written to DDR before
-+		 * writing bd->ctrl
-+		 */
-+		wmb();
-+		writel((BD_CTRL_PKT_INT_EN | BD_CTRL_LIFM | BD_CTRL_DIR |
-+			BD_CTRL_DESC_EN | BD_BUF_LEN(hif->rx_buf_len[rtc])),
-+			&desc->ctrl);
-+
-+		rtc = (rtc + 1) & (hif->rx_ring_size - 1);
-+
-+		if (local_desc.ctrl & BD_CTRL_LIFM) {
-+			if (!(hif->client_ctrl & HIF_CTRL_RX_CONTINUED)) {
-+				rx_processed++;
-+
-+#ifdef HIF_NAPI_STATS
-+				hif->napi_counters[NAPI_PACKET_COUNT]++;
-+#endif
-+			}
-+			hif->started = 0;
-+		}
-+	}
-+
-+	hif->rxtoclean_index = rtc;
-+	spin_unlock_bh(&hif->lock);
-+
-+	/* we made some progress, re-start rx dma in case it stopped */
-+	hif_rx_dma_start();
-+
-+	return rx_processed;
-+}
-+
-+/*
-+ * client_ack_txpacket-
-+ * This function ack the Tx packet in the give client Tx queue by resetting
-+ * ownership bit in the descriptor.
-+ */
-+static int client_ack_txpacket(struct pfe_hif *hif, unsigned int client_id,
-+			       unsigned int q_no)
-+{
-+	struct hif_tx_queue *queue = &hif->client[client_id].tx_q[q_no];
-+	struct tx_queue_desc *desc = queue->base + queue->ack_idx;
-+
-+	if (readl(&desc->ctrl) & CL_DESC_OWN) {
-+		writel((readl(&desc->ctrl) & ~CL_DESC_OWN), &desc->ctrl);
-+		queue->ack_idx = (queue->ack_idx + 1) & (queue->size - 1);
-+
-+		return 0;
-+
-+	} else {
-+		/*This should not happen */
-+		pr_err("%s: %d %d %d %d %d %p %d\n", __func__,
-+		       hif->txtosend, hif->txtoclean, hif->txavail,
-+			client_id, q_no, queue, queue->ack_idx);
-+		WARN(1, "%s: doesn't own this descriptor", __func__);
-+		return 1;
-+	}
-+}
-+
-+void __hif_tx_done_process(struct pfe_hif *hif, int count)
-+{
-+	struct hif_desc *desc;
-+	struct hif_desc_sw *desc_sw;
-+	int ttc, tx_avl;
-+	int pkts_done[HIF_CLIENTS_MAX] = {0, 0};
-+
-+	ttc = hif->txtoclean;
-+	tx_avl = hif->txavail;
-+
-+	while ((tx_avl < hif->tx_ring_size) && count--) {
-+		desc = hif->tx_base + ttc;
-+
-+		if (readl(&desc->ctrl) & BD_CTRL_DESC_EN)
-+			break;
-+
-+		desc_sw = &hif->tx_sw_queue[ttc];
-+
-+		if (desc_sw->data) {
-+			/*
-+			 * dmap_unmap_single(hif->dev, desc_sw->data,
-+			 * desc_sw->len, DMA_TO_DEVICE);
-+			 */
-+			dma_unmap_single(hif->dev, desc_sw->data,
-+					 desc_sw->len, DMA_TO_DEVICE);
-+		}
-+
-+		if (desc_sw->client_id >= HIF_CLIENTS_MAX) {
-+			pr_err("Invalid cl id %d\n", desc_sw->client_id);
-+			break;
-+		}
-+
-+		pkts_done[desc_sw->client_id]++;
-+
-+		client_ack_txpacket(hif, desc_sw->client_id, desc_sw->q_no);
-+
-+		ttc = (ttc + 1) & (hif->tx_ring_size - 1);
-+		tx_avl++;
-+	}
-+
-+	if (pkts_done[0])
-+		hif_lib_indicate_client(0, EVENT_TXDONE_IND, 0);
-+	if (pkts_done[1])
-+		hif_lib_indicate_client(1, EVENT_TXDONE_IND, 0);
-+
-+	hif->txtoclean = ttc;
-+	hif->txavail = tx_avl;
-+
-+	if (!count) {
-+		tasklet_schedule(&hif->tx_cleanup_tasklet);
-+	} else {
-+		/*Enable Tx done interrupt */
-+		writel(readl_relaxed(HIF_INT_ENABLE) | HIF_TXPKT_INT,
-+		       HIF_INT_ENABLE);
-+	}
-+}
-+
-+static void pfe_tx_do_cleanup(unsigned long data)
-+{
-+	struct pfe_hif *hif = (struct pfe_hif *)data;
-+
-+	writel(HIF_INT | HIF_TXPKT_INT, HIF_INT_SRC);
-+
-+	hif_tx_done_process(hif, 64);
-+}
-+
-+/*
-+ * __hif_xmit_pkt -
-+ * This function puts one packet in the HIF Tx queue
-+ */
-+void __hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int
-+			q_no, void *data, u32 len, unsigned int flags)
-+{
-+	struct hif_desc	*desc;
-+	struct hif_desc_sw *desc_sw;
-+
-+	desc = hif->tx_base + hif->txtosend;
-+	desc_sw = &hif->tx_sw_queue[hif->txtosend];
-+
-+	desc_sw->len = len;
-+	desc_sw->client_id = client_id;
-+	desc_sw->q_no = q_no;
-+	desc_sw->flags = flags;
-+
-+	if (flags & HIF_DONT_DMA_MAP) {
-+		desc_sw->data = 0;
-+		writel((u32)DDR_PHYS_TO_PFE(data), &desc->data);
-+	} else {
-+		desc_sw->data = dma_map_single(hif->dev, data, len,
-+						DMA_TO_DEVICE);
-+		writel((u32)DDR_PHYS_TO_PFE(desc_sw->data), &desc->data);
-+	}
-+
-+	hif->txtosend = (hif->txtosend + 1) & (hif->tx_ring_size - 1);
-+	hif->txavail--;
-+
-+	if ((!((flags & HIF_DATA_VALID) && (flags &
-+				HIF_LAST_BUFFER))))
-+		goto skip_tx;
-+
-+	/*
-+	 * Ensure everything else is written to DDR before
-+	 * writing bd->ctrl
-+	 */
-+	wmb();
-+
-+	do {
-+		desc_sw = &hif->tx_sw_queue[hif->txtoflush];
-+		desc = hif->tx_base + hif->txtoflush;
-+
-+		if (desc_sw->flags & HIF_LAST_BUFFER) {
-+			writel((BD_CTRL_LIFM |
-+			       BD_CTRL_BRFETCH_DISABLE | BD_CTRL_RTFETCH_DISABLE
-+			       | BD_CTRL_PARSE_DISABLE | BD_CTRL_DESC_EN |
-+				BD_CTRL_PKT_INT_EN | BD_BUF_LEN(desc_sw->len)),
-+				&desc->ctrl);
-+		} else {
-+			writel((BD_CTRL_DESC_EN |
-+				BD_BUF_LEN(desc_sw->len)), &desc->ctrl);
-+		}
-+		hif->txtoflush = (hif->txtoflush + 1) & (hif->tx_ring_size - 1);
-+	}
-+	while (hif->txtoflush != hif->txtosend)
-+		;
-+
-+skip_tx:
-+	return;
-+}
-+
-+static irqreturn_t wol_isr(int irq, void *dev_id)
-+{
-+	pr_info("WoL\n");
-+	gemac_set_wol(EMAC1_BASE_ADDR, 0);
-+	gemac_set_wol(EMAC2_BASE_ADDR, 0);
-+	return IRQ_HANDLED;
-+}
-+
-+/*
-+ * hif_isr-
-+ * This ISR routine processes Rx/Tx done interrupts from the HIF hardware block
-+ */
-+static irqreturn_t hif_isr(int irq, void *dev_id)
-+{
-+	struct pfe_hif *hif = (struct pfe_hif *)dev_id;
-+	int int_status;
-+	int int_enable_mask;
-+
-+	/*Read hif interrupt source register */
-+	int_status = readl_relaxed(HIF_INT_SRC);
-+	int_enable_mask = readl_relaxed(HIF_INT_ENABLE);
-+
-+	if ((int_status & HIF_INT) == 0)
-+		return IRQ_NONE;
-+
-+	int_status &= ~(HIF_INT);
-+
-+	if (int_status & HIF_RXPKT_INT) {
-+		int_status &= ~(HIF_RXPKT_INT);
-+		int_enable_mask &= ~(HIF_RXPKT_INT);
-+
-+		napi_first_batch = 1;
-+
-+		if (napi_schedule_prep(&hif->napi)) {
-+#ifdef HIF_NAPI_STATS
-+			hif->napi_counters[NAPI_SCHED_COUNT]++;
-+#endif
-+			__napi_schedule(&hif->napi);
-+		}
-+	}
-+
-+	if (int_status & HIF_TXPKT_INT) {
-+		int_status &= ~(HIF_TXPKT_INT);
-+		int_enable_mask &= ~(HIF_TXPKT_INT);
-+		/*Schedule tx cleanup tassklet */
-+		tasklet_schedule(&hif->tx_cleanup_tasklet);
-+	}
-+
-+	/*Disable interrupts, they will be enabled after they are serviced */
-+	writel_relaxed(int_enable_mask, HIF_INT_ENABLE);
-+
-+	if (int_status) {
-+		pr_info("%s : Invalid interrupt : %d\n", __func__,
-+			int_status);
-+		writel(int_status, HIF_INT_SRC);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+void hif_process_client_req(struct pfe_hif *hif, int req, int data1, int data2)
-+{
-+	unsigned int client_id = data1;
-+
-+	if (client_id >= HIF_CLIENTS_MAX) {
-+		pr_err("%s: client id %d out of bounds\n", __func__,
-+		       client_id);
-+		return;
-+	}
-+
-+	switch (req) {
-+	case REQUEST_CL_REGISTER:
-+			/* Request for register a client */
-+			pr_info("%s: register client_id %d\n",
-+				__func__, client_id);
-+			pfe_hif_client_register(hif, client_id, (struct
-+				hif_client_shm *)&hif->shm->client[client_id]);
-+			break;
-+
-+	case REQUEST_CL_UNREGISTER:
-+			pr_info("%s: unregister client_id %d\n",
-+				__func__, client_id);
-+
-+			/* Request for unregister a client */
-+			pfe_hif_client_unregister(hif, client_id);
-+
-+			break;
-+
-+	default:
-+			pr_err("%s: unsupported request %d\n",
-+			       __func__, req);
-+			break;
-+	}
-+
-+	/*
-+	 * Process client Tx queues
-+	 * Currently we don't have checking for tx pending
-+	 */
-+}
-+
-+/*
-+ * pfe_hif_rx_poll
-+ *  This function is NAPI poll function to process HIF Rx queue.
-+ */
-+static int pfe_hif_rx_poll(struct napi_struct *napi, int budget)
-+{
-+	struct pfe_hif *hif = container_of(napi, struct pfe_hif, napi);
-+	int work_done;
-+
-+#ifdef HIF_NAPI_STATS
-+	hif->napi_counters[NAPI_POLL_COUNT]++;
-+#endif
-+
-+	work_done = pfe_hif_rx_process(hif, budget);
-+
-+	if (work_done < budget) {
-+		napi_complete(napi);
-+		writel(readl_relaxed(HIF_INT_ENABLE) | HIF_RXPKT_INT,
-+		       HIF_INT_ENABLE);
-+	}
-+#ifdef HIF_NAPI_STATS
-+	else
-+		hif->napi_counters[NAPI_FULL_BUDGET_COUNT]++;
-+#endif
-+
-+	return work_done;
-+}
-+
-+/*
-+ * pfe_hif_init
-+ * This function initializes the baseaddresses and irq, etc.
-+ */
-+int pfe_hif_init(struct pfe *pfe)
-+{
-+	struct pfe_hif *hif = &pfe->hif;
-+	int err;
-+
-+	pr_info("%s\n", __func__);
-+
-+	hif->dev = pfe->dev;
-+	hif->irq = pfe->hif_irq;
-+
-+	err = pfe_hif_alloc_descr(hif);
-+	if (err)
-+		goto err0;
-+
-+	if (pfe_hif_init_buffers(hif)) {
-+		pr_err("%s: Could not initialize buffer descriptors\n"
-+			, __func__);
-+		err = -ENOMEM;
-+		goto err1;
-+	}
-+
-+	/* Initialize NAPI for Rx processing */
-+	init_dummy_netdev(&hif->dummy_dev);
-+	netif_napi_add(&hif->dummy_dev, &hif->napi, pfe_hif_rx_poll,
-+		       HIF_RX_POLL_WEIGHT);
-+	napi_enable(&hif->napi);
-+
-+	spin_lock_init(&hif->tx_lock);
-+	spin_lock_init(&hif->lock);
-+
-+	hif_init();
-+	hif_rx_enable();
-+	hif_tx_enable();
-+
-+	/* Disable tx done interrupt */
-+	writel(HIF_INT_MASK, HIF_INT_ENABLE);
-+
-+	gpi_enable(HGPI_BASE_ADDR);
-+
-+	err = request_irq(hif->irq, hif_isr, 0, "pfe_hif", hif);
-+	if (err) {
-+		pr_err("%s: failed to get the hif IRQ = %d\n",
-+		       __func__, hif->irq);
-+		goto err1;
-+	}
-+
-+	err = request_irq(pfe->wol_irq, wol_isr, 0, "pfe_wol", pfe);
-+	if (err) {
-+		pr_err("%s: failed to get the wol IRQ = %d\n",
-+		       __func__, pfe->wol_irq);
-+		goto err1;
-+	}
-+
-+	tasklet_init(&hif->tx_cleanup_tasklet,
-+		     (void(*)(unsigned long))pfe_tx_do_cleanup,
-+		     (unsigned long)hif);
-+
-+	return 0;
-+err1:
-+	pfe_hif_free_descr(hif);
-+err0:
-+	return err;
-+}
-+
-+/* pfe_hif_exit- */
-+void pfe_hif_exit(struct pfe *pfe)
-+{
-+	struct pfe_hif *hif = &pfe->hif;
-+
-+	pr_info("%s\n", __func__);
-+
-+	tasklet_kill(&hif->tx_cleanup_tasklet);
-+
-+	spin_lock_bh(&hif->lock);
-+	hif->shm->g_client_status[0] = 0;
-+	/* Make sure all clients are disabled*/
-+	hif->shm->g_client_status[1] = 0;
-+
-+	spin_unlock_bh(&hif->lock);
-+
-+	/*Disable Rx/Tx */
-+	gpi_disable(HGPI_BASE_ADDR);
-+	hif_rx_disable();
-+	hif_tx_disable();
-+
-+	napi_disable(&hif->napi);
-+	netif_napi_del(&hif->napi);
-+
-+	free_irq(pfe->wol_irq, pfe);
-+	free_irq(hif->irq, hif);
-+
-+	pfe_hif_release_buffers(hif);
-+	pfe_hif_free_descr(hif);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hif.h
-@@ -0,0 +1,199 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#ifndef _PFE_HIF_H_
-+#define _PFE_HIF_H_
-+
-+#include <linux/netdevice.h>
-+
-+#define HIF_NAPI_STATS
-+
-+#define HIF_CLIENT_QUEUES_MAX	16
-+#define HIF_RX_POLL_WEIGHT	64
-+
-+#define HIF_RX_PKT_MIN_SIZE 0x800 /* 2KB */
-+#define HIF_RX_PKT_MIN_SIZE_MASK ~(HIF_RX_PKT_MIN_SIZE - 1)
-+#define ROUND_MIN_RX_SIZE(_sz) (((_sz) + (HIF_RX_PKT_MIN_SIZE - 1)) \
-+					& HIF_RX_PKT_MIN_SIZE_MASK)
-+#define PRESENT_OFST_IN_PAGE(_buf) (((unsigned long int)(_buf) & (PAGE_SIZE \
-+					- 1)) & HIF_RX_PKT_MIN_SIZE_MASK)
-+
-+enum {
-+	NAPI_SCHED_COUNT = 0,
-+	NAPI_POLL_COUNT,
-+	NAPI_PACKET_COUNT,
-+	NAPI_DESC_COUNT,
-+	NAPI_FULL_BUDGET_COUNT,
-+	NAPI_CLIENT_FULL_COUNT,
-+	NAPI_MAX_COUNT
-+};
-+
-+/*
-+ * HIF_TX_DESC_NT value should be always greter than 4,
-+ * Otherwise HIF_TX_POLL_MARK will become zero.
-+ */
-+#define HIF_RX_DESC_NT		256
-+#define HIF_TX_DESC_NT		2048
-+
-+#define HIF_FIRST_BUFFER	BIT(0)
-+#define HIF_LAST_BUFFER		BIT(1)
-+#define HIF_DONT_DMA_MAP	BIT(2)
-+#define HIF_DATA_VALID		BIT(3)
-+#define HIF_TSO			BIT(4)
-+
-+enum {
-+	PFE_CL_GEM0 = 0,
-+	PFE_CL_GEM1,
-+	HIF_CLIENTS_MAX
-+};
-+
-+/*structure to store client queue info */
-+struct hif_rx_queue {
-+	struct rx_queue_desc *base;
-+	u32	size;
-+	u32	write_idx;
-+};
-+
-+struct hif_tx_queue {
-+	struct tx_queue_desc *base;
-+	u32	size;
-+	u32	ack_idx;
-+};
-+
-+/*Structure to store the client info */
-+struct hif_client {
-+	int	rx_qn;
-+	struct hif_rx_queue	rx_q[HIF_CLIENT_QUEUES_MAX];
-+	int	tx_qn;
-+	struct hif_tx_queue	tx_q[HIF_CLIENT_QUEUES_MAX];
-+};
-+
-+/*HIF hardware buffer descriptor */
-+struct hif_desc {
-+	u32 ctrl;
-+	u32 status;
-+	u32 data;
-+	u32 next;
-+};
-+
-+struct __hif_desc {
-+	u32 ctrl;
-+	u32 status;
-+	u32 data;
-+};
-+
-+struct hif_desc_sw {
-+	dma_addr_t data;
-+	u16 len;
-+	u8 client_id;
-+	u8 q_no;
-+	u16 flags;
-+};
-+
-+struct hif_hdr {
-+	u8 client_id;
-+	u8 q_num;
-+	u16 client_ctrl;
-+	u16 client_ctrl1;
-+};
-+
-+struct __hif_hdr {
-+	union {
-+		struct hif_hdr hdr;
-+		u32 word[2];
-+	};
-+};
-+
-+struct hif_ipsec_hdr {
-+	u16	sa_handle[2];
-+} __packed;
-+
-+/*  HIF_CTRL_TX... defines */
-+#define HIF_CTRL_TX_CHECKSUM		BIT(2)
-+
-+/*  HIF_CTRL_RX... defines */
-+#define HIF_CTRL_RX_OFFSET_OFST         (24)
-+#define HIF_CTRL_RX_CHECKSUMMED		BIT(2)
-+#define HIF_CTRL_RX_CONTINUED		BIT(1)
-+
-+struct pfe_hif {
-+	/* To store registered clients in hif layer */
-+	struct hif_client client[HIF_CLIENTS_MAX];
-+	struct hif_shm *shm;
-+	int	irq;
-+
-+	void	*descr_baseaddr_v;
-+	unsigned long	descr_baseaddr_p;
-+
-+	struct hif_desc *rx_base;
-+	u32	rx_ring_size;
-+	u32	rxtoclean_index;
-+	void	*rx_buf_addr[HIF_RX_DESC_NT];
-+	int	rx_buf_len[HIF_RX_DESC_NT];
-+	unsigned int qno;
-+	unsigned int client_id;
-+	unsigned int client_ctrl;
-+	unsigned int started;
-+
-+	struct hif_desc *tx_base;
-+	u32	tx_ring_size;
-+	u32	txtosend;
-+	u32	txtoclean;
-+	u32	txavail;
-+	u32	txtoflush;
-+	struct hif_desc_sw tx_sw_queue[HIF_TX_DESC_NT];
-+
-+/* tx_lock synchronizes hif packet tx as well as pfe_hif structure access */
-+	spinlock_t tx_lock;
-+/* lock synchronizes hif rx queue processing */
-+	spinlock_t lock;
-+	struct net_device	dummy_dev;
-+	struct napi_struct	napi;
-+	struct device *dev;
-+
-+#ifdef HIF_NAPI_STATS
-+	unsigned int napi_counters[NAPI_MAX_COUNT];
-+#endif
-+	struct tasklet_struct	tx_cleanup_tasklet;
-+};
-+
-+void __hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int
-+			q_no, void *data, u32 len, unsigned int flags);
-+int hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int q_no,
-+		 void *data, unsigned int len);
-+void __hif_tx_done_process(struct pfe_hif *hif, int count);
-+void hif_process_client_req(struct pfe_hif *hif, int req, int data1, int
-+				data2);
-+int pfe_hif_init(struct pfe *pfe);
-+void pfe_hif_exit(struct pfe *pfe);
-+void pfe_hif_rx_idle(struct pfe_hif *hif);
-+static inline void hif_tx_done_process(struct pfe_hif *hif, int count)
-+{
-+	spin_lock_bh(&hif->tx_lock);
-+	__hif_tx_done_process(hif, count);
-+	spin_unlock_bh(&hif->tx_lock);
-+}
-+
-+static inline void hif_tx_lock(struct pfe_hif *hif)
-+{
-+	spin_lock_bh(&hif->tx_lock);
-+}
-+
-+static inline void hif_tx_unlock(struct pfe_hif *hif)
-+{
-+	spin_unlock_bh(&hif->tx_lock);
-+}
-+
-+static inline int __hif_tx_avail(struct pfe_hif *hif)
-+{
-+	return hif->txavail;
-+}
-+
-+#define __memcpy8(dst, src)		memcpy(dst, src, 8)
-+#define __memcpy12(dst, src)		memcpy(dst, src, 12)
-+#define __memcpy(dst, src, len)		memcpy(dst, src, len)
-+
-+#endif /* _PFE_HIF_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.c
-@@ -0,0 +1,628 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/workqueue.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/sched.h>
-+#include <linux/skbuff.h>
-+#include <linux/moduleparam.h>
-+#include <linux/cpu.h>
-+
-+#include "pfe_mod.h"
-+#include "pfe_hif.h"
-+#include "pfe_hif_lib.h"
-+
-+unsigned int lro_mode;
-+unsigned int page_mode;
-+unsigned int tx_qos = 1;
-+module_param(tx_qos, uint, 0444);
-+MODULE_PARM_DESC(tx_qos, "0: disable ,\n"
-+			 "1: enable (default), guarantee no packet drop at TMU level\n");
-+unsigned int pfe_pkt_size;
-+unsigned int pfe_pkt_headroom;
-+unsigned int emac_txq_cnt;
-+
-+/*
-+ * @pfe_hal_lib.c.
-+ * Common functions used by HIF client drivers
-+ */
-+
-+/*HIF shared memory Global variable */
-+struct hif_shm ghif_shm;
-+
-+/* Cleanup the HIF shared memory, release HIF rx_buffer_pool.
-+ * This function should be called after pfe_hif_exit
-+ *
-+ * @param[in] hif_shm		Shared memory address location in DDR
-+ */
-+static void pfe_hif_shm_clean(struct hif_shm *hif_shm)
-+{
-+	int i;
-+	void *pkt;
-+
-+	for (i = 0; i < hif_shm->rx_buf_pool_cnt; i++) {
-+		pkt = hif_shm->rx_buf_pool[i];
-+		if (pkt) {
-+			hif_shm->rx_buf_pool[i] = NULL;
-+			pkt -= pfe_pkt_headroom;
-+
-+			if (page_mode)
-+				put_page(virt_to_page(pkt));
-+			else
-+				kfree(pkt);
-+		}
-+	}
-+}
-+
-+/* Initialize shared memory used between HIF driver and clients,
-+ * allocate rx_buffer_pool required for HIF Rx descriptors.
-+ * This function should be called before initializing HIF driver.
-+ *
-+ * @param[in] hif_shm		Shared memory address location in DDR
-+ * @rerurn			0 - on succes, <0 on fail to initialize
-+ */
-+static int pfe_hif_shm_init(struct hif_shm *hif_shm)
-+{
-+	int i;
-+	void *pkt;
-+
-+	memset(hif_shm, 0, sizeof(struct hif_shm));
-+	hif_shm->rx_buf_pool_cnt = HIF_RX_DESC_NT;
-+
-+	for (i = 0; i < hif_shm->rx_buf_pool_cnt; i++) {
-+		if (page_mode) {
-+			pkt = (void *)__get_free_page(GFP_KERNEL |
-+				GFP_DMA_PFE);
-+		} else {
-+			pkt = kmalloc(PFE_BUF_SIZE, GFP_KERNEL | GFP_DMA_PFE);
-+		}
-+
-+		if (pkt)
-+			hif_shm->rx_buf_pool[i] = pkt + pfe_pkt_headroom;
-+		else
-+			goto err0;
-+	}
-+
-+	return 0;
-+
-+err0:
-+	pr_err("%s Low memory\n", __func__);
-+	pfe_hif_shm_clean(hif_shm);
-+	return -ENOMEM;
-+}
-+
-+/*This function sends indication to HIF driver
-+ *
-+ * @param[in] hif	hif context
-+ */
-+static void hif_lib_indicate_hif(struct pfe_hif *hif, int req, int data1, int
-+					data2)
-+{
-+	hif_process_client_req(hif, req, data1, data2);
-+}
-+
-+void hif_lib_indicate_client(int client_id, int event_type, int qno)
-+{
-+	struct hif_client_s *client = pfe->hif_client[client_id];
-+
-+	if (!client || (event_type >= HIF_EVENT_MAX) || (qno >=
-+		HIF_CLIENT_QUEUES_MAX))
-+		return;
-+
-+	if (!test_and_set_bit(qno, &client->queue_mask[event_type]))
-+		client->event_handler(client->priv, event_type, qno);
-+}
-+
-+/*This function releases Rx queue descriptors memory and pre-filled buffers
-+ *
-+ * @param[in] client	hif_client context
-+ */
-+static void hif_lib_client_release_rx_buffers(struct hif_client_s *client)
-+{
-+	struct rx_queue_desc *desc;
-+	int qno, ii;
-+	void *buf;
-+
-+	for (qno = 0; qno < client->rx_qn; qno++) {
-+		desc = client->rx_q[qno].base;
-+
-+		for (ii = 0; ii < client->rx_q[qno].size; ii++) {
-+			buf = (void *)desc->data;
-+			if (buf) {
-+				buf -= pfe_pkt_headroom;
-+
-+				if (page_mode)
-+					free_page((unsigned long)buf);
-+				else
-+					kfree(buf);
-+
-+				desc->ctrl = 0;
-+			}
-+
-+			desc++;
-+		}
-+	}
-+
-+	kfree(client->rx_qbase);
-+}
-+
-+/*This function allocates memory for the rxq descriptors and pre-fill rx queues
-+ * with buffers.
-+ * @param[in] client	client context
-+ * @param[in] q_size	size of the rxQ, all queues are of same size
-+ */
-+static int hif_lib_client_init_rx_buffers(struct hif_client_s *client, int
-+						q_size)
-+{
-+	struct rx_queue_desc *desc;
-+	struct hif_client_rx_queue *queue;
-+	int ii, qno;
-+
-+	/*Allocate memory for the client queues */
-+	client->rx_qbase = kzalloc(client->rx_qn * q_size * sizeof(struct
-+				rx_queue_desc), GFP_KERNEL);
-+	if (!client->rx_qbase)
-+		goto err;
-+
-+	for (qno = 0; qno < client->rx_qn; qno++) {
-+		queue = &client->rx_q[qno];
-+
-+		queue->base = client->rx_qbase + qno * q_size * sizeof(struct
-+				rx_queue_desc);
-+		queue->size = q_size;
-+		queue->read_idx = 0;
-+		queue->write_idx = 0;
-+
-+		pr_debug("rx queue: %d, base: %p, size: %d\n", qno,
-+			 queue->base, queue->size);
-+	}
-+
-+	for (qno = 0; qno < client->rx_qn; qno++) {
-+		queue = &client->rx_q[qno];
-+		desc = queue->base;
-+
-+		for (ii = 0; ii < queue->size; ii++) {
-+			desc->ctrl = CL_DESC_BUF_LEN(pfe_pkt_size) |
-+					CL_DESC_OWN;
-+			desc++;
-+		}
-+	}
-+
-+	return 0;
-+
-+err:
-+	return 1;
-+}
-+
-+
-+static void hif_lib_client_cleanup_tx_queue(struct hif_client_tx_queue *queue)
-+{
-+	pr_debug("%s\n", __func__);
-+
-+	/*
-+	 * Check if there are any pending packets. Client must flush the tx
-+	 * queues before unregistering, by calling by calling
-+	 * hif_lib_tx_get_next_complete()
-+	 *
-+	 * Hif no longer calls since we are no longer registered
-+	 */
-+	if (queue->tx_pending)
-+		pr_err("%s: pending transmit packets\n", __func__);
-+}
-+
-+static void hif_lib_client_release_tx_buffers(struct hif_client_s *client)
-+{
-+	int qno;
-+
-+	pr_debug("%s\n", __func__);
-+
-+	for (qno = 0; qno < client->tx_qn; qno++)
-+		hif_lib_client_cleanup_tx_queue(&client->tx_q[qno]);
-+
-+	kfree(client->tx_qbase);
-+}
-+
-+static int hif_lib_client_init_tx_buffers(struct hif_client_s *client, int
-+						q_size)
-+{
-+	struct hif_client_tx_queue *queue;
-+	int qno;
-+
-+	client->tx_qbase = kzalloc(client->tx_qn * q_size * sizeof(struct
-+					tx_queue_desc), GFP_KERNEL);
-+	if (!client->tx_qbase)
-+		return 1;
-+
-+	for (qno = 0; qno < client->tx_qn; qno++) {
-+		queue = &client->tx_q[qno];
-+
-+		queue->base = client->tx_qbase + qno * q_size * sizeof(struct
-+				tx_queue_desc);
-+		queue->size = q_size;
-+		queue->read_idx = 0;
-+		queue->write_idx = 0;
-+		queue->tx_pending = 0;
-+		queue->nocpy_flag = 0;
-+		queue->prev_tmu_tx_pkts = 0;
-+		queue->done_tmu_tx_pkts = 0;
-+
-+		pr_debug("tx queue: %d, base: %p, size: %d\n", qno,
-+			 queue->base, queue->size);
-+	}
-+
-+	return 0;
-+}
-+
-+static int hif_lib_event_dummy(void *priv, int event_type, int qno)
-+{
-+	return 0;
-+}
-+
-+int hif_lib_client_register(struct hif_client_s *client)
-+{
-+	struct hif_shm *hif_shm;
-+	struct hif_client_shm *client_shm;
-+	int err, i;
-+	/* int loop_cnt = 0; */
-+
-+	pr_debug("%s\n", __func__);
-+
-+	/*Allocate memory before spin_lock*/
-+	if (hif_lib_client_init_rx_buffers(client, client->rx_qsize)) {
-+		err = -ENOMEM;
-+		goto err_rx;
-+	}
-+
-+	if (hif_lib_client_init_tx_buffers(client, client->tx_qsize)) {
-+		err = -ENOMEM;
-+		goto err_tx;
-+	}
-+
-+	spin_lock_bh(&pfe->hif.lock);
-+	if (!(client->pfe) || (client->id >= HIF_CLIENTS_MAX) ||
-+	    (pfe->hif_client[client->id])) {
-+		err = -EINVAL;
-+		goto err;
-+	}
-+
-+	hif_shm = client->pfe->hif.shm;
-+
-+	if (!client->event_handler)
-+		client->event_handler = hif_lib_event_dummy;
-+
-+	/*Initialize client specific shared memory */
-+	client_shm = (struct hif_client_shm *)&hif_shm->client[client->id];
-+	client_shm->rx_qbase = (unsigned long int)client->rx_qbase;
-+	client_shm->rx_qsize = client->rx_qsize;
-+	client_shm->tx_qbase = (unsigned long int)client->tx_qbase;
-+	client_shm->tx_qsize = client->tx_qsize;
-+	client_shm->ctrl = (client->tx_qn << CLIENT_CTRL_TX_Q_CNT_OFST) |
-+				(client->rx_qn << CLIENT_CTRL_RX_Q_CNT_OFST);
-+	/* spin_lock_init(&client->rx_lock); */
-+
-+	for (i = 0; i < HIF_EVENT_MAX; i++) {
-+		client->queue_mask[i] = 0;  /*
-+					     * By default all events are
-+					     * unmasked
-+					     */
-+	}
-+
-+	/*Indicate to HIF driver*/
-+	hif_lib_indicate_hif(&pfe->hif, REQUEST_CL_REGISTER, client->id, 0);
-+
-+	pr_debug("%s: client: %p, client_id: %d, tx_qsize: %d, rx_qsize: %d\n",
-+		 __func__, client, client->id, client->tx_qsize,
-+		 client->rx_qsize);
-+
-+	client->cpu_id = -1;
-+
-+	pfe->hif_client[client->id] = client;
-+	spin_unlock_bh(&pfe->hif.lock);
-+
-+	return 0;
-+
-+err:
-+	spin_unlock_bh(&pfe->hif.lock);
-+	hif_lib_client_release_tx_buffers(client);
-+
-+err_tx:
-+	hif_lib_client_release_rx_buffers(client);
-+
-+err_rx:
-+	return err;
-+}
-+
-+int hif_lib_client_unregister(struct hif_client_s *client)
-+{
-+	struct pfe *pfe = client->pfe;
-+	u32 client_id = client->id;
-+
-+	pr_info(
-+		"%s : client: %p, client_id: %d, txQ_depth: %d, rxQ_depth: %d\n"
-+		, __func__, client, client->id, client->tx_qsize,
-+		client->rx_qsize);
-+
-+	spin_lock_bh(&pfe->hif.lock);
-+	hif_lib_indicate_hif(&pfe->hif, REQUEST_CL_UNREGISTER, client->id, 0);
-+
-+	hif_lib_client_release_tx_buffers(client);
-+	hif_lib_client_release_rx_buffers(client);
-+	pfe->hif_client[client_id] = NULL;
-+	spin_unlock_bh(&pfe->hif.lock);
-+
-+	return 0;
-+}
-+
-+int hif_lib_event_handler_start(struct hif_client_s *client, int event,
-+				int qno)
-+{
-+	struct hif_client_rx_queue *queue = &client->rx_q[qno];
-+	struct rx_queue_desc *desc = queue->base + queue->read_idx;
-+
-+	if ((event >= HIF_EVENT_MAX) || (qno >= HIF_CLIENT_QUEUES_MAX)) {
-+		pr_debug("%s: Unsupported event : %d  queue number : %d\n",
-+			 __func__, event, qno);
-+		return -1;
-+	}
-+
-+	test_and_clear_bit(qno, &client->queue_mask[event]);
-+
-+	switch (event) {
-+	case EVENT_RX_PKT_IND:
-+		if (!(desc->ctrl & CL_DESC_OWN))
-+			hif_lib_indicate_client(client->id,
-+						EVENT_RX_PKT_IND, qno);
-+		break;
-+
-+	case EVENT_HIGH_RX_WM:
-+	case EVENT_TXDONE_IND:
-+	default:
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * This function gets one packet from the specified client queue
-+ * It also refill the rx buffer
-+ */
-+void *hif_lib_receive_pkt(struct hif_client_s *client, int qno, int *len, int
-+				*ofst, unsigned int *rx_ctrl,
-+				unsigned int *desc_ctrl, void **priv_data)
-+{
-+	struct hif_client_rx_queue *queue = &client->rx_q[qno];
-+	struct rx_queue_desc *desc;
-+	void *pkt = NULL;
-+
-+	/*
-+	 * Following lock is to protect rx queue access from,
-+	 * hif_lib_event_handler_start.
-+	 * In general below lock is not required, because hif_lib_xmit_pkt and
-+	 * hif_lib_event_handler_start are called from napi poll and which is
-+	 * not re-entrant. But if some client use in different way this lock is
-+	 * required.
-+	 */
-+	/*spin_lock_irqsave(&client->rx_lock, flags); */
-+	desc = queue->base + queue->read_idx;
-+	if (!(desc->ctrl & CL_DESC_OWN)) {
-+		pkt = desc->data - pfe_pkt_headroom;
-+
-+		*rx_ctrl = desc->client_ctrl;
-+		*desc_ctrl = desc->ctrl;
-+
-+		if (desc->ctrl & CL_DESC_FIRST) {
-+			u16 size = *rx_ctrl >> HIF_CTRL_RX_OFFSET_OFST;
-+
-+			if (size) {
-+				size += PFE_PARSE_INFO_SIZE;
-+				*len = CL_DESC_BUF_LEN(desc->ctrl) -
-+						PFE_PKT_HEADER_SZ - size;
-+				*ofst = pfe_pkt_headroom + PFE_PKT_HEADER_SZ
-+								+ size;
-+				*priv_data = desc->data + PFE_PKT_HEADER_SZ;
-+			} else {
-+				*len = CL_DESC_BUF_LEN(desc->ctrl) -
-+				       PFE_PKT_HEADER_SZ - PFE_PARSE_INFO_SIZE;
-+				*ofst = pfe_pkt_headroom
-+					+ PFE_PKT_HEADER_SZ
-+					+ PFE_PARSE_INFO_SIZE;
-+				*priv_data = NULL;
-+			}
-+
-+		} else {
-+			*len = CL_DESC_BUF_LEN(desc->ctrl);
-+			*ofst = pfe_pkt_headroom;
-+		}
-+
-+		/*
-+		 * Needed so we don't free a buffer/page
-+		 * twice on module_exit
-+		 */
-+		desc->data = NULL;
-+
-+		/*
-+		 * Ensure everything else is written to DDR before
-+		 * writing bd->ctrl
-+		 */
-+		smp_wmb();
-+
-+		desc->ctrl = CL_DESC_BUF_LEN(pfe_pkt_size) | CL_DESC_OWN;
-+		queue->read_idx = (queue->read_idx + 1) & (queue->size - 1);
-+	}
-+
-+	/*spin_unlock_irqrestore(&client->rx_lock, flags); */
-+	return pkt;
-+}
-+
-+static inline void hif_hdr_write(struct hif_hdr *pkt_hdr, unsigned int
-+					client_id, unsigned int qno,
-+					u32 client_ctrl)
-+{
-+	/* Optimize the write since the destinaton may be non-cacheable */
-+	if (!((unsigned long)pkt_hdr & 0x3)) {
-+		((u32 *)pkt_hdr)[0] = (client_ctrl << 16) | (qno << 8) |
-+					client_id;
-+	} else {
-+		((u16 *)pkt_hdr)[0] = (qno << 8) | (client_id & 0xFF);
-+		((u16 *)pkt_hdr)[1] = (client_ctrl & 0xFFFF);
-+	}
-+}
-+
-+/*This function puts the given packet in the specific client queue */
-+void __hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void
-+				*data, unsigned int len, u32 client_ctrl,
-+				unsigned int flags, void *client_data)
-+{
-+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
-+	struct tx_queue_desc *desc = queue->base + queue->write_idx;
-+
-+	/* First buffer */
-+	if (flags & HIF_FIRST_BUFFER) {
-+		data -= sizeof(struct hif_hdr);
-+		len += sizeof(struct hif_hdr);
-+
-+		hif_hdr_write(data, client->id, qno, client_ctrl);
-+	}
-+
-+	desc->data = client_data;
-+	desc->ctrl = CL_DESC_OWN | CL_DESC_FLAGS(flags);
-+
-+	__hif_xmit_pkt(&pfe->hif, client->id, qno, data, len, flags);
-+
-+	queue->write_idx = (queue->write_idx + 1) & (queue->size - 1);
-+	queue->tx_pending++;
-+	queue->jiffies_last_packet = jiffies;
-+}
-+
-+void *hif_lib_tx_get_next_complete(struct hif_client_s *client, int qno,
-+				   unsigned int *flags, int count)
-+{
-+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
-+	struct tx_queue_desc *desc = queue->base + queue->read_idx;
-+
-+	pr_debug("%s: qno : %d rd_indx: %d pending:%d\n", __func__, qno,
-+		 queue->read_idx, queue->tx_pending);
-+
-+	if (!queue->tx_pending)
-+		return NULL;
-+
-+	if (queue->nocpy_flag && !queue->done_tmu_tx_pkts) {
-+		u32 tmu_tx_pkts = be32_to_cpu(pe_dmem_read(TMU0_ID +
-+			client->id, TMU_DM_TX_TRANS, 4));
-+
-+		if (queue->prev_tmu_tx_pkts > tmu_tx_pkts)
-+			queue->done_tmu_tx_pkts = UINT_MAX -
-+				queue->prev_tmu_tx_pkts + tmu_tx_pkts;
-+		else
-+			queue->done_tmu_tx_pkts = tmu_tx_pkts -
-+						queue->prev_tmu_tx_pkts;
-+
-+		queue->prev_tmu_tx_pkts  = tmu_tx_pkts;
-+
-+		if (!queue->done_tmu_tx_pkts)
-+			return NULL;
-+	}
-+
-+	if (desc->ctrl & CL_DESC_OWN)
-+		return NULL;
-+
-+	queue->read_idx = (queue->read_idx + 1) & (queue->size - 1);
-+	queue->tx_pending--;
-+
-+	*flags = CL_DESC_GET_FLAGS(desc->ctrl);
-+
-+	if (queue->done_tmu_tx_pkts && (*flags & HIF_LAST_BUFFER))
-+		queue->done_tmu_tx_pkts--;
-+
-+	return desc->data;
-+}
-+
-+static void hif_lib_tmu_credit_init(struct pfe *pfe)
-+{
-+	int i, q;
-+
-+	for (i = 0; i < NUM_GEMAC_SUPPORT; i++)
-+		for (q = 0; q < emac_txq_cnt; q++) {
-+			pfe->tmu_credit.tx_credit_max[i][q] = (q == 0) ?
-+					DEFAULT_Q0_QDEPTH : DEFAULT_MAX_QDEPTH;
-+			pfe->tmu_credit.tx_credit[i][q] =
-+					pfe->tmu_credit.tx_credit_max[i][q];
-+		}
-+}
-+
-+/* __hif_lib_update_credit
-+ *
-+ * @param[in] client	hif client context
-+ * @param[in] queue	queue number in match with TMU
-+ */
-+void __hif_lib_update_credit(struct hif_client_s *client, unsigned int queue)
-+{
-+	unsigned int tmu_tx_packets, tmp;
-+
-+	if (tx_qos) {
-+		tmu_tx_packets = be32_to_cpu(pe_dmem_read(TMU0_ID +
-+			client->id, (TMU_DM_TX_TRANS + (queue * 4)), 4));
-+
-+		/* tx_packets counter overflowed */
-+		if (tmu_tx_packets >
-+		    pfe->tmu_credit.tx_packets[client->id][queue]) {
-+			tmp = UINT_MAX - tmu_tx_packets +
-+			pfe->tmu_credit.tx_packets[client->id][queue];
-+
-+			pfe->tmu_credit.tx_credit[client->id][queue] =
-+			pfe->tmu_credit.tx_credit_max[client->id][queue] - tmp;
-+		} else {
-+		/* TMU tx <= pfe_eth tx, normal case or both OF since
-+		 * last time
-+		 */
-+			pfe->tmu_credit.tx_credit[client->id][queue] =
-+			pfe->tmu_credit.tx_credit_max[client->id][queue] -
-+			(pfe->tmu_credit.tx_packets[client->id][queue] -
-+			tmu_tx_packets);
-+		}
-+	}
-+}
-+
-+int pfe_hif_lib_init(struct pfe *pfe)
-+{
-+	int rc;
-+
-+	pr_info("%s\n", __func__);
-+
-+	if (lro_mode) {
-+		page_mode = 1;
-+		pfe_pkt_size = min(PAGE_SIZE, MAX_PFE_PKT_SIZE);
-+		pfe_pkt_headroom = 0;
-+	} else {
-+		page_mode = 0;
-+		pfe_pkt_size = PFE_PKT_SIZE;
-+		pfe_pkt_headroom = PFE_PKT_HEADROOM;
-+	}
-+
-+	if (tx_qos)
-+		emac_txq_cnt = EMAC_TXQ_CNT / 2;
-+	else
-+		emac_txq_cnt = EMAC_TXQ_CNT;
-+
-+	hif_lib_tmu_credit_init(pfe);
-+	pfe->hif.shm = &ghif_shm;
-+	rc = pfe_hif_shm_init(pfe->hif.shm);
-+
-+	return rc;
-+}
-+
-+void pfe_hif_lib_exit(struct pfe *pfe)
-+{
-+	pr_info("%s\n", __func__);
-+
-+	pfe_hif_shm_clean(pfe->hif.shm);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.h
-@@ -0,0 +1,229 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#ifndef _PFE_HIF_LIB_H_
-+#define _PFE_HIF_LIB_H_
-+
-+#include "pfe_hif.h"
-+
-+#define HIF_CL_REQ_TIMEOUT	10
-+#define GFP_DMA_PFE 0
-+#define PFE_PARSE_INFO_SIZE	16
-+
-+enum {
-+	REQUEST_CL_REGISTER = 0,
-+	REQUEST_CL_UNREGISTER,
-+	HIF_REQUEST_MAX
-+};
-+
-+enum {
-+	/* Event to indicate that client rx queue is reached water mark level */
-+	EVENT_HIGH_RX_WM = 0,
-+	/* Event to indicate that, packet received for client */
-+	EVENT_RX_PKT_IND,
-+	/* Event to indicate that, packet tx done for client */
-+	EVENT_TXDONE_IND,
-+	HIF_EVENT_MAX
-+};
-+
-+/*structure to store client queue info */
-+
-+/*structure to store client queue info */
-+struct hif_client_rx_queue {
-+	struct rx_queue_desc *base;
-+	u32	size;
-+	u32	read_idx;
-+	u32	write_idx;
-+};
-+
-+struct hif_client_tx_queue {
-+	struct tx_queue_desc *base;
-+	u32	size;
-+	u32	read_idx;
-+	u32	write_idx;
-+	u32	tx_pending;
-+	unsigned long jiffies_last_packet;
-+	u32	nocpy_flag;
-+	u32	prev_tmu_tx_pkts;
-+	u32	done_tmu_tx_pkts;
-+};
-+
-+struct hif_client_s {
-+	int	id;
-+	int	tx_qn;
-+	int	rx_qn;
-+	void	*rx_qbase;
-+	void	*tx_qbase;
-+	int	tx_qsize;
-+	int	rx_qsize;
-+	int	cpu_id;
-+	struct hif_client_tx_queue tx_q[HIF_CLIENT_QUEUES_MAX];
-+	struct hif_client_rx_queue rx_q[HIF_CLIENT_QUEUES_MAX];
-+	int (*event_handler)(void *priv, int event, int data);
-+	unsigned long queue_mask[HIF_EVENT_MAX];
-+	struct pfe *pfe;
-+	void *priv;
-+};
-+
-+/*
-+ * Client specific shared memory
-+ * It contains number of Rx/Tx queues, base addresses and queue sizes
-+ */
-+struct hif_client_shm {
-+	u32 ctrl; /*0-7: number of Rx queues, 8-15: number of tx queues */
-+	unsigned long rx_qbase; /*Rx queue base address */
-+	u32 rx_qsize; /*each Rx queue size, all Rx queues are of same size */
-+	unsigned long tx_qbase; /* Tx queue base address */
-+	u32 tx_qsize; /*each Tx queue size, all Tx queues are of same size */
-+};
-+
-+/*Client shared memory ctrl bit description */
-+#define CLIENT_CTRL_RX_Q_CNT_OFST	0
-+#define CLIENT_CTRL_TX_Q_CNT_OFST	8
-+#define CLIENT_CTRL_RX_Q_CNT(ctrl)	(((ctrl) >> CLIENT_CTRL_RX_Q_CNT_OFST) \
-+						& 0xFF)
-+#define CLIENT_CTRL_TX_Q_CNT(ctrl)	(((ctrl) >> CLIENT_CTRL_TX_Q_CNT_OFST) \
-+						& 0xFF)
-+
-+/*
-+ * Shared memory used to communicate between HIF driver and host/client drivers
-+ * Before starting the hif driver rx_buf_pool ans rx_buf_pool_cnt should be
-+ * initialized with host buffers and buffers count in the pool.
-+ * rx_buf_pool_cnt should be >= HIF_RX_DESC_NT.
-+ *
-+ */
-+struct hif_shm {
-+	u32 rx_buf_pool_cnt; /*Number of rx buffers available*/
-+	/*Rx buffers required to initialize HIF rx descriptors */
-+	void *rx_buf_pool[HIF_RX_DESC_NT];
-+	unsigned long g_client_status[2]; /*Global client status bit mask */
-+	/* Client specific shared memory */
-+	struct hif_client_shm client[HIF_CLIENTS_MAX];
-+};
-+
-+#define CL_DESC_OWN	BIT(31)
-+/* This sets owner ship to HIF driver */
-+#define CL_DESC_LAST	BIT(30)
-+/* This indicates last packet for multi buffers handling */
-+#define CL_DESC_FIRST	BIT(29)
-+/* This indicates first packet for multi buffers handling */
-+
-+#define CL_DESC_BUF_LEN(x)		((x) & 0xFFFF)
-+#define CL_DESC_FLAGS(x)		(((x) & 0xF) << 16)
-+#define CL_DESC_GET_FLAGS(x)		(((x) >> 16) & 0xF)
-+
-+struct rx_queue_desc {
-+	void *data;
-+	u32	ctrl; /*0-15bit len, 16-20bit flags, 31bit owner*/
-+	u32	client_ctrl;
-+};
-+
-+struct tx_queue_desc {
-+	void *data;
-+	u32	ctrl; /*0-15bit len, 16-20bit flags, 31bit owner*/
-+};
-+
-+/* HIF Rx is not working properly for 2-byte aligned buffers and
-+ * ip_header should be 4byte aligned for better iperformance.
-+ * "ip_header = 64 + 6(hif_header) + 14 (MAC Header)" will be 4byte aligned.
-+ */
-+#define PFE_PKT_HEADER_SZ	sizeof(struct hif_hdr)
-+/* must be big enough for headroom, pkt size and skb shared info */
-+#define PFE_BUF_SIZE		2048
-+#define PFE_PKT_HEADROOM	128
-+
-+#define SKB_SHARED_INFO_SIZE   SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
-+#define PFE_PKT_SIZE		(PFE_BUF_SIZE - PFE_PKT_HEADROOM \
-+				 - SKB_SHARED_INFO_SIZE)
-+#define MAX_L2_HDR_SIZE		14	/* Not correct for VLAN/PPPoE */
-+#define MAX_L3_HDR_SIZE		20	/* Not correct for IPv6 */
-+#define MAX_L4_HDR_SIZE		60	/* TCP with maximum options */
-+#define MAX_HDR_SIZE		(MAX_L2_HDR_SIZE + MAX_L3_HDR_SIZE \
-+				 + MAX_L4_HDR_SIZE)
-+/* Used in page mode to clamp packet size to the maximum supported by the hif
-+ *hw interface (<16KiB)
-+ */
-+#define MAX_PFE_PKT_SIZE	16380UL
-+
-+extern unsigned int pfe_pkt_size;
-+extern unsigned int pfe_pkt_headroom;
-+extern unsigned int page_mode;
-+extern unsigned int lro_mode;
-+extern unsigned int tx_qos;
-+extern unsigned int emac_txq_cnt;
-+
-+int pfe_hif_lib_init(struct pfe *pfe);
-+void pfe_hif_lib_exit(struct pfe *pfe);
-+int hif_lib_client_register(struct hif_client_s *client);
-+int hif_lib_client_unregister(struct  hif_client_s *client);
-+void __hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void
-+				*data, unsigned int len, u32 client_ctrl,
-+				unsigned int flags, void *client_data);
-+int hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void *data,
-+		     unsigned int len, u32 client_ctrl, void *client_data);
-+void hif_lib_indicate_client(int cl_id, int event, int data);
-+int hif_lib_event_handler_start(struct hif_client_s *client, int event, int
-+					data);
-+int hif_lib_tmu_queue_start(struct hif_client_s *client, int qno);
-+int hif_lib_tmu_queue_stop(struct hif_client_s *client, int qno);
-+void *hif_lib_tx_get_next_complete(struct hif_client_s *client, int qno,
-+				   unsigned int *flags, int count);
-+void *hif_lib_receive_pkt(struct hif_client_s *client, int qno, int *len, int
-+				*ofst, unsigned int *rx_ctrl,
-+				unsigned int *desc_ctrl, void **priv_data);
-+void __hif_lib_update_credit(struct hif_client_s *client, unsigned int queue);
-+void hif_lib_set_rx_cpu_affinity(struct hif_client_s *client, int cpu_id);
-+void hif_lib_set_tx_queue_nocpy(struct hif_client_s *client, int qno, int
-+					enable);
-+static inline int hif_lib_tx_avail(struct hif_client_s *client, unsigned int
-+					qno)
-+{
-+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
-+
-+	return (queue->size - queue->tx_pending);
-+}
-+
-+static inline int hif_lib_get_tx_wr_index(struct hif_client_s *client, unsigned
-+						int qno)
-+{
-+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
-+
-+	return queue->write_idx;
-+}
-+
-+static inline int hif_lib_tx_pending(struct hif_client_s *client, unsigned int
-+					qno)
-+{
-+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
-+
-+	return queue->tx_pending;
-+}
-+
-+#define hif_lib_tx_credit_avail(pfe, id, qno) \
-+				((pfe)->tmu_credit.tx_credit[id][qno])
-+
-+#define hif_lib_tx_credit_max(pfe, id, qno) \
-+				((pfe)->tmu_credit.tx_credit_max[id][qno])
-+
-+/*
-+ * Test comment
-+ */
-+#define hif_lib_tx_credit_use(pfe, id, qno, credit)			\
-+	({ typeof(pfe) pfe_ = pfe;					\
-+		typeof(id) id_ = id;					\
-+		typeof(qno) qno_ = qno;					\
-+		typeof(credit) credit_ = credit;			\
-+		do {							\
-+			if (tx_qos) {					\
-+				(pfe_)->tmu_credit.tx_credit[id_][qno_]\
-+					 -= credit_;			\
-+				(pfe_)->tmu_credit.tx_packets[id_][qno_]\
-+					+= credit_;			\
-+			}						\
-+		} while (0);						\
-+	})
-+
-+#endif /* _PFE_HIF_LIB_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hw.c
-@@ -0,0 +1,164 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#include "pfe_mod.h"
-+#include "pfe_hw.h"
-+
-+/* Functions to handle most of pfe hw register initialization */
-+int pfe_hw_init(struct pfe *pfe, int resume)
-+{
-+	struct class_cfg class_cfg = {
-+		.pe_sys_clk_ratio = PE_SYS_CLK_RATIO,
-+		.route_table_baseaddr = pfe->ddr_phys_baseaddr +
-+					ROUTE_TABLE_BASEADDR,
-+		.route_table_hash_bits = ROUTE_TABLE_HASH_BITS,
-+	};
-+
-+	struct tmu_cfg tmu_cfg = {
-+		.pe_sys_clk_ratio = PE_SYS_CLK_RATIO,
-+		.llm_base_addr = pfe->ddr_phys_baseaddr + TMU_LLM_BASEADDR,
-+		.llm_queue_len = TMU_LLM_QUEUE_LEN,
-+	};
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	struct util_cfg util_cfg = {
-+		.pe_sys_clk_ratio = PE_SYS_CLK_RATIO,
-+	};
-+#endif
-+
-+	struct BMU_CFG bmu1_cfg = {
-+		.baseaddr = CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR +
-+						BMU1_LMEM_BASEADDR),
-+		.count = BMU1_BUF_COUNT,
-+		.size = BMU1_BUF_SIZE,
-+		.low_watermark = 10,
-+		.high_watermark = 15,
-+	};
-+
-+	struct BMU_CFG bmu2_cfg = {
-+		.baseaddr = DDR_PHYS_TO_PFE(pfe->ddr_phys_baseaddr +
-+						BMU2_DDR_BASEADDR),
-+		.count = BMU2_BUF_COUNT,
-+		.size = BMU2_BUF_SIZE,
-+		.low_watermark = 250,
-+		.high_watermark = 253,
-+	};
-+
-+	struct gpi_cfg egpi1_cfg = {
-+		.lmem_rtry_cnt = EGPI1_LMEM_RTRY_CNT,
-+		.tmlf_txthres = EGPI1_TMLF_TXTHRES,
-+		.aseq_len = EGPI1_ASEQ_LEN,
-+		.mtip_pause_reg = CBUS_VIRT_TO_PFE(EMAC1_BASE_ADDR +
-+						EMAC_TCNTRL_REG),
-+	};
-+
-+	struct gpi_cfg egpi2_cfg = {
-+		.lmem_rtry_cnt = EGPI2_LMEM_RTRY_CNT,
-+		.tmlf_txthres = EGPI2_TMLF_TXTHRES,
-+		.aseq_len = EGPI2_ASEQ_LEN,
-+		.mtip_pause_reg = CBUS_VIRT_TO_PFE(EMAC2_BASE_ADDR +
-+						EMAC_TCNTRL_REG),
-+	};
-+
-+	struct gpi_cfg hgpi_cfg = {
-+		.lmem_rtry_cnt = HGPI_LMEM_RTRY_CNT,
-+		.tmlf_txthres = HGPI_TMLF_TXTHRES,
-+		.aseq_len = HGPI_ASEQ_LEN,
-+		.mtip_pause_reg = 0,
-+	};
-+
-+	pr_info("%s\n", __func__);
-+
-+#if !defined(LS1012A_PFE_RESET_WA)
-+	/* LS1012A needs this to make PE work correctly */
-+	writel(0x3,     CLASS_PE_SYS_CLK_RATIO);
-+	writel(0x3,     TMU_PE_SYS_CLK_RATIO);
-+	writel(0x3,     UTIL_PE_SYS_CLK_RATIO);
-+	usleep_range(10, 20);
-+#endif
-+
-+	pr_info("CLASS version: %x\n", readl(CLASS_VERSION));
-+	pr_info("TMU version: %x\n", readl(TMU_VERSION));
-+
-+	pr_info("BMU1 version: %x\n", readl(BMU1_BASE_ADDR +
-+		BMU_VERSION));
-+	pr_info("BMU2 version: %x\n", readl(BMU2_BASE_ADDR +
-+		BMU_VERSION));
-+
-+	pr_info("EGPI1 version: %x\n", readl(EGPI1_BASE_ADDR +
-+		GPI_VERSION));
-+	pr_info("EGPI2 version: %x\n", readl(EGPI2_BASE_ADDR +
-+		GPI_VERSION));
-+	pr_info("HGPI version: %x\n", readl(HGPI_BASE_ADDR +
-+		GPI_VERSION));
-+
-+	pr_info("HIF version: %x\n", readl(HIF_VERSION));
-+	pr_info("HIF NOPCY version: %x\n", readl(HIF_NOCPY_VERSION));
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	pr_info("UTIL version: %x\n", readl(UTIL_VERSION));
-+#endif
-+	while (!(readl(TMU_CTRL) & ECC_MEM_INIT_DONE))
-+		;
-+
-+	hif_rx_disable();
-+	hif_tx_disable();
-+
-+	bmu_init(BMU1_BASE_ADDR, &bmu1_cfg);
-+
-+	pr_info("bmu_init(1) done\n");
-+
-+	bmu_init(BMU2_BASE_ADDR, &bmu2_cfg);
-+
-+	pr_info("bmu_init(2) done\n");
-+
-+	class_cfg.resume = resume ? 1 : 0;
-+
-+	class_init(&class_cfg);
-+
-+	pr_info("class_init() done\n");
-+
-+	tmu_init(&tmu_cfg);
-+
-+	pr_info("tmu_init() done\n");
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	util_init(&util_cfg);
-+
-+	pr_info("util_init() done\n");
-+#endif
-+	gpi_init(EGPI1_BASE_ADDR, &egpi1_cfg);
-+
-+	pr_info("gpi_init(1) done\n");
-+
-+	gpi_init(EGPI2_BASE_ADDR, &egpi2_cfg);
-+
-+	pr_info("gpi_init(2) done\n");
-+
-+	gpi_init(HGPI_BASE_ADDR, &hgpi_cfg);
-+
-+	pr_info("gpi_init(hif) done\n");
-+
-+	bmu_enable(BMU1_BASE_ADDR);
-+
-+	pr_info("bmu_enable(1) done\n");
-+
-+	bmu_enable(BMU2_BASE_ADDR);
-+
-+	pr_info("bmu_enable(2) done\n");
-+
-+	return 0;
-+}
-+
-+void pfe_hw_exit(struct pfe *pfe)
-+{
-+	pr_info("%s\n", __func__);
-+
-+	bmu_disable(BMU1_BASE_ADDR);
-+	bmu_reset(BMU1_BASE_ADDR);
-+
-+	bmu_disable(BMU2_BASE_ADDR);
-+	bmu_reset(BMU2_BASE_ADDR);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_hw.h
-@@ -0,0 +1,15 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#ifndef _PFE_HW_H_
-+#define _PFE_HW_H_
-+
-+#define PE_SYS_CLK_RATIO	1	/* SYS/AXI = 250MHz, HFE = 500MHz */
-+
-+int pfe_hw_init(struct pfe *pfe, int resume);
-+void pfe_hw_exit(struct pfe *pfe);
-+
-+#endif /* _PFE_HW_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
-@@ -0,0 +1,383 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/of.h>
-+#include <linux/of_net.h>
-+#include <linux/of_address.h>
-+#include <linux/of_mdio.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/clk.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
-+
-+#include "pfe_mod.h"
-+
-+extern bool pfe_use_old_dts_phy;
-+struct ls1012a_pfe_platform_data pfe_platform_data;
-+
-+static int pfe_get_gemac_if_properties(struct device_node *gem,
-+				       int port,
-+				       struct ls1012a_pfe_platform_data	*pdata)
-+{
-+	struct device_node *phy_node = NULL;
-+	int size;
-+	int phy_id = 0;
-+	const u32 *addr;
-+	int err;
-+
-+	addr = of_get_property(gem, "reg", &size);
-+	if (addr)
-+		port = be32_to_cpup(addr);
-+	else
-+		goto err;
-+
-+	pdata->ls1012a_eth_pdata[port].gem_id = port;
-+
-+	of_get_mac_address(gem, pdata->ls1012a_eth_pdata[port].mac_addr);
-+
-+	phy_node = of_parse_phandle(gem, "phy-handle", 0);
-+	pdata->ls1012a_eth_pdata[port].phy_node = phy_node;
-+	if (phy_node) {
-+		pfe_use_old_dts_phy = false;
-+		goto process_phynode;
-+	} else if (of_phy_is_fixed_link(gem)) {
-+		pfe_use_old_dts_phy = false;
-+		if (of_phy_register_fixed_link(gem) < 0) {
-+			pr_err("broken fixed-link specification\n");
-+			goto err;
-+		}
-+		phy_node = of_node_get(gem);
-+		pdata->ls1012a_eth_pdata[port].phy_node = phy_node;
-+	} else if (of_get_property(gem, "fsl,pfe-phy-if-flags", &size)) {
-+		pfe_use_old_dts_phy = true;
-+		/* Use old dts properties for phy handling */
-+		addr = of_get_property(gem, "fsl,pfe-phy-if-flags", &size);
-+		pdata->ls1012a_eth_pdata[port].phy_flags = be32_to_cpup(addr);
-+
-+		addr = of_get_property(gem, "fsl,gemac-phy-id", &size);
-+		if (!addr) {
-+			pr_err("%s:%d Invalid gemac-phy-id....\n", __func__,
-+			       __LINE__);
-+		} else {
-+			phy_id = be32_to_cpup(addr);
-+			pdata->ls1012a_eth_pdata[port].phy_id = phy_id;
-+			pdata->ls1012a_mdio_pdata[0].phy_mask &= ~(1 << phy_id);
-+		}
-+
-+		/* If PHY is enabled, read mdio properties */
-+		if (pdata->ls1012a_eth_pdata[port].phy_flags & GEMAC_NO_PHY)
-+			goto done;
-+
-+	} else {
-+		pr_info("%s: No PHY or fixed-link\n", __func__);
-+		return 0;
-+	}
-+
-+process_phynode:
-+	err = of_get_phy_mode(gem, &pdata->ls1012a_eth_pdata[port].mii_config);
-+	if (err)
-+		pr_err("%s:%d Incorrect Phy mode....\n", __func__,
-+		       __LINE__);
-+
-+	addr = of_get_property(gem, "fsl,mdio-mux-val", &size);
-+	if (!addr) {
-+		pr_err("%s: Invalid mdio-mux-val....\n", __func__);
-+	} else {
-+		phy_id = be32_to_cpup(addr);
-+		pdata->ls1012a_eth_pdata[port].mdio_muxval = phy_id;
-+	}
-+
-+	if (pdata->ls1012a_eth_pdata[port].phy_id < 32)
-+		pfe->mdio_muxval[pdata->ls1012a_eth_pdata[port].phy_id] =
-+			 pdata->ls1012a_eth_pdata[port].mdio_muxval;
-+
-+
-+	pdata->ls1012a_mdio_pdata[port].irq[0] = PHY_POLL;
-+
-+done:
-+	return 0;
-+
-+err:
-+	return -1;
-+}
-+
-+/*
-+ *
-+ * pfe_platform_probe -
-+ *
-+ *
-+ */
-+static int pfe_platform_probe(struct platform_device *pdev)
-+{
-+	struct resource res;
-+	int ii = 0, rc, interface_count = 0, size = 0;
-+	const u32 *prop;
-+	struct device_node *np, *gem = NULL;
-+	struct clk *pfe_clk;
-+
-+	np = pdev->dev.of_node;
-+
-+	if (!np) {
-+		pr_err("Invalid device node\n");
-+		return -EINVAL;
-+	}
-+
-+	pfe = kzalloc(sizeof(*pfe), GFP_KERNEL);
-+	if (!pfe) {
-+		rc = -ENOMEM;
-+		goto err_alloc;
-+	}
-+
-+	platform_set_drvdata(pdev, pfe);
-+
-+	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32))) {
-+		rc = -ENOMEM;
-+		pr_err("unable to configure DMA mask.\n");
-+		goto err_ddr;
-+	}
-+
-+	if (of_address_to_resource(np, 1, &res)) {
-+		rc = -ENOMEM;
-+		pr_err("failed to get ddr resource\n");
-+		goto err_ddr;
-+	}
-+
-+	pfe->ddr_phys_baseaddr = res.start;
-+	pfe->ddr_size = resource_size(&res);
-+
-+	pfe->ddr_baseaddr = memremap(res.start, resource_size(&res),
-+				     MEMREMAP_WB);
-+	if (!pfe->ddr_baseaddr) {
-+		pr_err("memremap() ddr failed\n");
-+		rc = -ENOMEM;
-+		goto err_ddr;
-+	}
-+
-+	pfe->scfg =
-+		syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+						"fsl,pfe-scfg");
-+	if (IS_ERR(pfe->scfg)) {
-+		dev_err(&pdev->dev, "No syscfg phandle specified\n");
-+		return PTR_ERR(pfe->scfg);
-+	}
-+
-+	pfe->cbus_baseaddr = of_iomap(np, 0);
-+	if (!pfe->cbus_baseaddr) {
-+		rc = -ENOMEM;
-+		pr_err("failed to get axi resource\n");
-+		goto err_axi;
-+	}
-+
-+	pfe->hif_irq = platform_get_irq(pdev, 0);
-+	if (pfe->hif_irq < 0) {
-+		pr_err("platform_get_irq for hif failed\n");
-+		rc = pfe->hif_irq;
-+		goto err_hif_irq;
-+	}
-+
-+	pfe->wol_irq = platform_get_irq(pdev, 2);
-+	if (pfe->wol_irq < 0) {
-+		pr_err("platform_get_irq for WoL failed\n");
-+		rc = pfe->wol_irq;
-+		goto err_hif_irq;
-+	}
-+
-+	/* Read interface count */
-+	prop = of_get_property(np, "fsl,pfe-num-interfaces", &size);
-+	if (!prop) {
-+		pr_err("Failed to read number of interfaces\n");
-+		rc = -ENXIO;
-+		goto err_prop;
-+	}
-+
-+	interface_count = be32_to_cpup(prop);
-+	if (interface_count <= 0) {
-+		pr_err("No ethernet interface count : %d\n",
-+		       interface_count);
-+		rc = -ENXIO;
-+		goto err_prop;
-+	}
-+
-+	pfe_platform_data.ls1012a_mdio_pdata[0].phy_mask = 0xffffffff;
-+
-+	while ((gem = of_get_next_child(np, gem))) {
-+		if (of_find_property(gem, "reg", &size)) {
-+			pfe_get_gemac_if_properties(gem, ii,
-+						&pfe_platform_data);
-+			ii++;
-+		}
-+	}
-+
-+	if (interface_count != ii)
-+		pr_info("missing some of gemac interface properties.\n");
-+
-+	pfe->dev = &pdev->dev;
-+
-+	pfe->dev->platform_data = &pfe_platform_data;
-+
-+	/* declare WoL capabilities */
-+	device_init_wakeup(&pdev->dev, true);
-+
-+	/* find the clocks */
-+	pfe_clk = devm_clk_get(pfe->dev, "pfe");
-+	if (IS_ERR(pfe_clk))
-+		return PTR_ERR(pfe_clk);
-+
-+	/* PFE clock is (platform clock / 2) */
-+	/* save sys_clk value as KHz */
-+	pfe->ctrl.sys_clk = clk_get_rate(pfe_clk) / (2 * 1000);
-+
-+	rc = pfe_probe(pfe);
-+	if (rc < 0)
-+		goto err_probe;
-+
-+	return 0;
-+
-+err_probe:
-+err_prop:
-+err_hif_irq:
-+	iounmap(pfe->cbus_baseaddr);
-+
-+err_axi:
-+	memunmap(pfe->ddr_baseaddr);
-+
-+err_ddr:
-+	platform_set_drvdata(pdev, NULL);
-+
-+	kfree(pfe);
-+
-+err_alloc:
-+	return rc;
-+}
-+
-+/*
-+ * pfe_platform_remove -
-+ */
-+static int pfe_platform_remove(struct platform_device *pdev)
-+{
-+	struct pfe *pfe = platform_get_drvdata(pdev);
-+	int rc;
-+
-+	pr_info("%s\n", __func__);
-+
-+	rc = pfe_remove(pfe);
-+
-+	iounmap(pfe->cbus_baseaddr);
-+
-+	memunmap(pfe->ddr_baseaddr);
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	kfree(pfe);
-+
-+	return rc;
-+}
-+
-+#ifdef CONFIG_PM
-+#ifdef CONFIG_PM_SLEEP
-+int pfe_platform_suspend(struct device *dev)
-+{
-+	struct pfe *pfe = platform_get_drvdata(to_platform_device(dev));
-+	struct net_device *netdev;
-+	int i;
-+
-+	pfe->wake = 0;
-+
-+	for (i = 0; i < (NUM_GEMAC_SUPPORT); i++) {
-+		netdev = pfe->eth.eth_priv[i]->ndev;
-+
-+		netif_device_detach(netdev);
-+
-+		if (netif_running(netdev))
-+			if (pfe_eth_suspend(netdev))
-+				pfe->wake = 1;
-+	}
-+
-+	/* Shutdown PFE only if we're not waking up the system */
-+	if (!pfe->wake) {
-+#if defined(LS1012A_PFE_RESET_WA)
-+		pfe_hif_rx_idle(&pfe->hif);
-+#endif
-+		pfe_ctrl_suspend(&pfe->ctrl);
-+		pfe_firmware_exit(pfe);
-+
-+		pfe_hif_exit(pfe);
-+		pfe_hif_lib_exit(pfe);
-+
-+		pfe_hw_exit(pfe);
-+	}
-+
-+	return 0;
-+}
-+
-+static int pfe_platform_resume(struct device *dev)
-+{
-+	struct pfe *pfe = platform_get_drvdata(to_platform_device(dev));
-+	struct net_device *netdev;
-+	int i;
-+
-+	if (!pfe->wake) {
-+		pfe_hw_init(pfe, 1);
-+		pfe_hif_lib_init(pfe);
-+		pfe_hif_init(pfe);
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+		util_enable();
-+#endif
-+		tmu_enable(0xf);
-+		class_enable();
-+		pfe_ctrl_resume(&pfe->ctrl);
-+	}
-+
-+	for (i = 0; i < (NUM_GEMAC_SUPPORT); i++) {
-+		netdev = pfe->eth.eth_priv[i]->ndev;
-+
-+		if (pfe->mdio.mdio_priv[i]->mii_bus)
-+			pfe_eth_mdio_reset(pfe->mdio.mdio_priv[i]->mii_bus);
-+
-+		if (netif_running(netdev))
-+			pfe_eth_resume(netdev);
-+
-+		netif_device_attach(netdev);
-+	}
-+	return 0;
-+}
-+#else
-+#define pfe_platform_suspend NULL
-+#define pfe_platform_resume NULL
-+#endif
-+
-+static const struct dev_pm_ops pfe_platform_pm_ops = {
-+	SET_SYSTEM_SLEEP_PM_OPS(pfe_platform_suspend, pfe_platform_resume)
-+};
-+#endif
-+
-+static const struct of_device_id pfe_match[] = {
-+	{
-+		.compatible = "fsl,pfe",
-+	},
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, pfe_match);
-+
-+static struct platform_driver pfe_platform_driver = {
-+	.probe = pfe_platform_probe,
-+	.remove = pfe_platform_remove,
-+	.driver = {
-+		.name = "pfe",
-+		.of_match_table = pfe_match,
-+#ifdef CONFIG_PM
-+		.pm = &pfe_platform_pm_ops,
-+#endif
-+	},
-+};
-+
-+module_platform_driver(pfe_platform_driver);
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("PFE Ethernet driver");
-+MODULE_AUTHOR("NXP DNCPE");
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_mod.c
-@@ -0,0 +1,158 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#include <linux/dma-mapping.h>
-+#include "pfe_mod.h"
-+#include "pfe_cdev.h"
-+
-+unsigned int us;
-+module_param(us, uint, 0444);
-+MODULE_PARM_DESC(us, "0: module enabled for kernel networking (DEFAULT)\n"
-+			"1: module enabled for userspace networking\n");
-+struct pfe *pfe;
-+
-+/*
-+ * pfe_probe -
-+ */
-+int pfe_probe(struct pfe *pfe)
-+{
-+	int rc;
-+
-+	if (pfe->ddr_size < DDR_MAX_SIZE) {
-+		pr_err("%s: required DDR memory (%x) above platform ddr memory (%x)\n",
-+		       __func__, (unsigned int)DDR_MAX_SIZE, pfe->ddr_size);
-+		rc = -ENOMEM;
-+		goto err_hw;
-+	}
-+
-+	if (((int)(pfe->ddr_phys_baseaddr + BMU2_DDR_BASEADDR) &
-+			(8 * SZ_1M - 1)) != 0) {
-+		pr_err("%s: BMU2 base address (0x%x) must be aligned on 8MB boundary\n",
-+		       __func__, (int)pfe->ddr_phys_baseaddr +
-+			BMU2_DDR_BASEADDR);
-+		rc = -ENOMEM;
-+		goto err_hw;
-+	}
-+
-+	pr_info("cbus_baseaddr: %lx, ddr_baseaddr: %lx, ddr_phys_baseaddr: %lx, ddr_size: %x\n",
-+		(unsigned long)pfe->cbus_baseaddr,
-+		(unsigned long)pfe->ddr_baseaddr,
-+		pfe->ddr_phys_baseaddr, pfe->ddr_size);
-+
-+	pfe_lib_init(pfe->cbus_baseaddr, pfe->ddr_baseaddr,
-+		     pfe->ddr_phys_baseaddr, pfe->ddr_size);
-+
-+	rc = pfe_hw_init(pfe, 0);
-+	if (rc < 0)
-+		goto err_hw;
-+
-+	if (us)
-+		goto firmware_init;
-+
-+	rc = pfe_hif_lib_init(pfe);
-+	if (rc < 0)
-+		goto err_hif_lib;
-+
-+	rc = pfe_hif_init(pfe);
-+	if (rc < 0)
-+		goto err_hif;
-+
-+firmware_init:
-+	rc = pfe_firmware_init(pfe);
-+	if (rc < 0)
-+		goto err_firmware;
-+
-+	rc = pfe_ctrl_init(pfe);
-+	if (rc < 0)
-+		goto err_ctrl;
-+
-+	rc = pfe_eth_init(pfe);
-+	if (rc < 0)
-+		goto err_eth;
-+
-+	rc = pfe_sysfs_init(pfe);
-+	if (rc < 0)
-+		goto err_sysfs;
-+
-+	rc = pfe_debugfs_init(pfe);
-+	if (rc < 0)
-+		goto err_debugfs;
-+
-+	if (us) {
-+		/* Creating a character device */
-+		rc = pfe_cdev_init();
-+		if (rc < 0)
-+			goto err_cdev;
-+	}
-+
-+	return 0;
-+
-+err_cdev:
-+	pfe_debugfs_exit(pfe);
-+
-+err_debugfs:
-+	pfe_sysfs_exit(pfe);
-+
-+err_sysfs:
-+	pfe_eth_exit(pfe);
-+
-+err_eth:
-+	pfe_ctrl_exit(pfe);
-+
-+err_ctrl:
-+	pfe_firmware_exit(pfe);
-+
-+err_firmware:
-+	if (us)
-+		goto err_hif_lib;
-+
-+	pfe_hif_exit(pfe);
-+
-+err_hif:
-+	pfe_hif_lib_exit(pfe);
-+
-+err_hif_lib:
-+	pfe_hw_exit(pfe);
-+
-+err_hw:
-+	return rc;
-+}
-+
-+/*
-+ * pfe_remove -
-+ */
-+int pfe_remove(struct pfe *pfe)
-+{
-+	pr_info("%s\n", __func__);
-+
-+	if (us)
-+		pfe_cdev_exit();
-+
-+	pfe_debugfs_exit(pfe);
-+
-+	pfe_sysfs_exit(pfe);
-+
-+	pfe_eth_exit(pfe);
-+
-+	pfe_ctrl_exit(pfe);
-+
-+#if defined(LS1012A_PFE_RESET_WA)
-+	pfe_hif_rx_idle(&pfe->hif);
-+#endif
-+	pfe_firmware_exit(pfe);
-+
-+	if (us)
-+		goto hw_exit;
-+
-+	pfe_hif_exit(pfe);
-+
-+	pfe_hif_lib_exit(pfe);
-+
-+hw_exit:
-+	pfe_hw_exit(pfe);
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_mod.h
-@@ -0,0 +1,103 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#ifndef _PFE_MOD_H_
-+#define _PFE_MOD_H_
-+
-+#include <linux/device.h>
-+#include <linux/elf.h>
-+
-+extern unsigned int us;
-+
-+struct pfe;
-+
-+#include "pfe_hw.h"
-+#include "pfe_firmware.h"
-+#include "pfe_ctrl.h"
-+#include "pfe_hif.h"
-+#include "pfe_hif_lib.h"
-+#include "pfe_eth.h"
-+#include "pfe_sysfs.h"
-+#include "pfe_perfmon.h"
-+#include "pfe_debugfs.h"
-+
-+#define PHYID_MAX_VAL 32
-+
-+struct pfe_tmu_credit {
-+	/* Number of allowed TX packet in-flight, matches TMU queue size */
-+	unsigned int tx_credit[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT];
-+	unsigned int tx_credit_max[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT];
-+	unsigned int tx_packets[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT];
-+};
-+
-+struct pfe {
-+	struct regmap	*scfg;
-+	unsigned long ddr_phys_baseaddr;
-+	void *ddr_baseaddr;
-+	unsigned int ddr_size;
-+	void *cbus_baseaddr;
-+	void *apb_baseaddr;
-+	unsigned long iram_phys_baseaddr;
-+	void *iram_baseaddr;
-+	unsigned long ipsec_phys_baseaddr;
-+	void *ipsec_baseaddr;
-+	int hif_irq;
-+	int wol_irq;
-+	int hif_client_irq;
-+	struct device *dev;
-+	struct dentry *dentry;
-+	struct pfe_ctrl ctrl;
-+	struct pfe_hif hif;
-+	struct pfe_eth eth;
-+	struct pfe_mdio mdio;
-+	struct hif_client_s *hif_client[HIF_CLIENTS_MAX];
-+#if defined(CFG_DIAGS)
-+	struct pfe_diags diags;
-+#endif
-+	struct pfe_tmu_credit tmu_credit;
-+	struct pfe_cpumon cpumon;
-+	struct pfe_memmon memmon;
-+	int wake;
-+	int mdio_muxval[PHYID_MAX_VAL];
-+	struct clk *hfe_clock;
-+};
-+
-+extern struct pfe *pfe;
-+
-+int pfe_probe(struct pfe *pfe);
-+int pfe_remove(struct pfe *pfe);
-+
-+/* DDR Mapping in reserved memory*/
-+#define ROUTE_TABLE_BASEADDR	0
-+#define ROUTE_TABLE_HASH_BITS	15	/* 32K entries */
-+#define ROUTE_TABLE_SIZE	((1 << ROUTE_TABLE_HASH_BITS) \
-+				  * CLASS_ROUTE_SIZE)
-+#define BMU2_DDR_BASEADDR	(ROUTE_TABLE_BASEADDR + ROUTE_TABLE_SIZE)
-+#define BMU2_BUF_COUNT		(4096 - 256)
-+/* This is to get a total DDR size of 12MiB */
-+#define BMU2_DDR_SIZE		(DDR_BUF_SIZE * BMU2_BUF_COUNT)
-+#define UTIL_CODE_BASEADDR	(BMU2_DDR_BASEADDR + BMU2_DDR_SIZE)
-+#define UTIL_CODE_SIZE		(128 * SZ_1K)
-+#define UTIL_DDR_DATA_BASEADDR	(UTIL_CODE_BASEADDR + UTIL_CODE_SIZE)
-+#define UTIL_DDR_DATA_SIZE	(64 * SZ_1K)
-+#define CLASS_DDR_DATA_BASEADDR	(UTIL_DDR_DATA_BASEADDR + UTIL_DDR_DATA_SIZE)
-+#define CLASS_DDR_DATA_SIZE	(32 * SZ_1K)
-+#define TMU_DDR_DATA_BASEADDR	(CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE)
-+#define TMU_DDR_DATA_SIZE	(32 * SZ_1K)
-+#define TMU_LLM_BASEADDR	(TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE)
-+#define TMU_LLM_QUEUE_LEN	(8 * 512)
-+/* Must be power of two and at least 16 * 8 = 128 bytes */
-+#define TMU_LLM_SIZE		(4 * 16 * TMU_LLM_QUEUE_LEN)
-+/* (4 TMU's x 16 queues x queue_len) */
-+
-+#define DDR_MAX_SIZE		(TMU_LLM_BASEADDR + TMU_LLM_SIZE)
-+
-+/* LMEM Mapping */
-+#define BMU1_LMEM_BASEADDR	0
-+#define BMU1_BUF_COUNT		256
-+#define BMU1_LMEM_SIZE		(LMEM_BUF_SIZE * BMU1_BUF_COUNT)
-+
-+#endif /* _PFE_MOD_H */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_perfmon.h
-@@ -0,0 +1,26 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#ifndef _PFE_PERFMON_H_
-+#define _PFE_PERFMON_H_
-+
-+#include "pfe/pfe.h"
-+
-+#define	CT_CPUMON_INTERVAL	(1 * TIMER_TICKS_PER_SEC)
-+
-+struct pfe_cpumon {
-+	u32 cpu_usage_pct[MAX_PE];
-+	u32 class_usage_pct;
-+};
-+
-+struct pfe_memmon {
-+	u32 kernel_memory_allocated;
-+};
-+
-+int pfe_perfmon_init(struct pfe *pfe);
-+void pfe_perfmon_exit(struct pfe *pfe);
-+
-+#endif /* _PFE_PERFMON_H_ */
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_sysfs.c
-@@ -0,0 +1,840 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include "pfe_mod.h"
-+
-+#define PE_EXCEPTION_DUMP_ADDRESS 0x1fa8
-+#define NUM_QUEUES		16
-+
-+static char register_name[20][5] = {
-+	"EPC", "ECAS", "EID", "ED",
-+	"r0", "r1", "r2", "r3",
-+	"r4", "r5", "r6", "r7",
-+	"r8", "r9", "r10", "r11",
-+	"r12", "r13", "r14", "r15",
-+};
-+
-+static char exception_name[14][20] = {
-+	"Reset",
-+	"HardwareFailure",
-+	"NMI",
-+	"InstBreakpoint",
-+	"DataBreakpoint",
-+	"Unsupported",
-+	"PrivilegeViolation",
-+	"InstBusError",
-+	"DataBusError",
-+	"AlignmentError",
-+	"ArithmeticError",
-+	"SystemCall",
-+	"MemoryManagement",
-+	"Interrupt",
-+};
-+
-+static unsigned long class_do_clear;
-+static unsigned long tmu_do_clear;
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+static unsigned long util_do_clear;
-+#endif
-+
-+static ssize_t display_pe_status(char *buf, int id, u32 dmem_addr, unsigned long
-+					do_clear)
-+{
-+	ssize_t len = 0;
-+	u32 val;
-+	char statebuf[5];
-+	struct pfe_cpumon *cpumon = &pfe->cpumon;
-+	u32 debug_indicator;
-+	u32 debug[20];
-+
-+	if (id < CLASS0_ID || id >= MAX_PE)
-+		return len;
-+
-+	*(u32 *)statebuf = pe_dmem_read(id, dmem_addr, 4);
-+	dmem_addr += 4;
-+
-+	statebuf[4] = '\0';
-+	len += sprintf(buf + len, "state=%4s ", statebuf);
-+
-+	val = pe_dmem_read(id, dmem_addr, 4);
-+	dmem_addr += 4;
-+	len += sprintf(buf + len, "ctr=%08x ", cpu_to_be32(val));
-+
-+	val = pe_dmem_read(id, dmem_addr, 4);
-+	if (do_clear && val)
-+		pe_dmem_write(id, 0, dmem_addr, 4);
-+	dmem_addr += 4;
-+	len += sprintf(buf + len, "rx=%u ", cpu_to_be32(val));
-+
-+	val = pe_dmem_read(id, dmem_addr, 4);
-+	if (do_clear && val)
-+		pe_dmem_write(id, 0, dmem_addr, 4);
-+	dmem_addr += 4;
-+	if (id >= TMU0_ID && id <= TMU_MAX_ID)
-+		len += sprintf(buf + len, "qstatus=%x", cpu_to_be32(val));
-+	else
-+		len += sprintf(buf + len, "tx=%u", cpu_to_be32(val));
-+
-+	val = pe_dmem_read(id, dmem_addr, 4);
-+	if (do_clear && val)
-+		pe_dmem_write(id, 0, dmem_addr, 4);
-+	dmem_addr += 4;
-+	if (val)
-+		len += sprintf(buf + len, " drop=%u", cpu_to_be32(val));
-+
-+	len += sprintf(buf + len, " load=%d%%", cpumon->cpu_usage_pct[id]);
-+
-+	len += sprintf(buf + len, "\n");
-+
-+	debug_indicator = pe_dmem_read(id, dmem_addr, 4);
-+	dmem_addr += 4;
-+	if (!strncmp((char *)&debug_indicator, "DBUG", 4)) {
-+		int j, last = 0;
-+
-+		for (j = 0; j < 16; j++) {
-+			debug[j] = pe_dmem_read(id, dmem_addr, 4);
-+			if (debug[j]) {
-+				if (do_clear)
-+					pe_dmem_write(id, 0, dmem_addr, 4);
-+				last = j + 1;
-+			}
-+			dmem_addr += 4;
-+		}
-+		for (j = 0; j < last; j++) {
-+			len += sprintf(buf + len, "%08x%s",
-+			cpu_to_be32(debug[j]),
-+			(j & 0x7) == 0x7 || j == last - 1 ? "\n" : " ");
-+		}
-+	}
-+
-+	if (!strncmp(statebuf, "DEAD", 4)) {
-+		u32 i, dump = PE_EXCEPTION_DUMP_ADDRESS;
-+
-+		len += sprintf(buf + len, "Exception details:\n");
-+		for (i = 0; i < 20; i++) {
-+			debug[i] = pe_dmem_read(id, dump, 4);
-+			dump += 4;
-+			if (i == 2)
-+				len += sprintf(buf + len, "%4s = %08x (=%s) ",
-+				register_name[i], cpu_to_be32(debug[i]),
-+				exception_name[min((u32)
-+				cpu_to_be32(debug[i]), (u32)13)]);
-+			else
-+				len += sprintf(buf + len, "%4s = %08x%s",
-+				register_name[i], cpu_to_be32(debug[i]),
-+				(i & 0x3) == 0x3 || i == 19 ? "\n" : " ");
-+		}
-+	}
-+
-+	return len;
-+}
-+
-+static ssize_t class_phy_stats(char *buf, int phy)
-+{
-+	ssize_t len = 0;
-+	int off1 = phy * 0x28;
-+	int off2 = phy * 0x10;
-+
-+	if (phy == 3)
-+		off1 = CLASS_PHY4_RX_PKTS - CLASS_PHY1_RX_PKTS;
-+
-+	len += sprintf(buf + len, "phy: %d\n", phy);
-+	len += sprintf(buf + len,
-+			"  rx:   %10u, tx:   %10u, intf:  %10u, ipv4:    %10u, ipv6: %10u\n",
-+			readl(CLASS_PHY1_RX_PKTS + off1),
-+			readl(CLASS_PHY1_TX_PKTS + off1),
-+			readl(CLASS_PHY1_INTF_MATCH_PKTS + off1),
-+			readl(CLASS_PHY1_V4_PKTS + off1),
-+			readl(CLASS_PHY1_V6_PKTS + off1));
-+
-+	len += sprintf(buf + len,
-+			"  icmp: %10u, igmp: %10u, tcp:   %10u, udp:     %10u\n",
-+			readl(CLASS_PHY1_ICMP_PKTS + off2),
-+			readl(CLASS_PHY1_IGMP_PKTS + off2),
-+			readl(CLASS_PHY1_TCP_PKTS + off2),
-+			readl(CLASS_PHY1_UDP_PKTS + off2));
-+
-+	len += sprintf(buf + len, "  err\n");
-+	len += sprintf(buf + len,
-+			"  lp:   %10u, intf: %10u, l3:    %10u, chcksum: %10u, ttl:  %10u\n",
-+			readl(CLASS_PHY1_LP_FAIL_PKTS + off1),
-+			readl(CLASS_PHY1_INTF_FAIL_PKTS + off1),
-+			readl(CLASS_PHY1_L3_FAIL_PKTS + off1),
-+			readl(CLASS_PHY1_CHKSUM_ERR_PKTS + off1),
-+			readl(CLASS_PHY1_TTL_ERR_PKTS + off1));
-+
-+	return len;
-+}
-+
-+/* qm_read_drop_stat
-+ * This function is used to read the drop statistics from the TMU
-+ * hw drop counter.  Since the hw counter is always cleared afer
-+ * reading, this function maintains the previous drop count, and
-+ * adds the new value to it.  That value can be retrieved by
-+ * passing a pointer to it with the total_drops arg.
-+ *
-+ * @param tmu		TMU number (0 - 3)
-+ * @param queue		queue number (0 - 15)
-+ * @param total_drops	pointer to location to store total drops (or NULL)
-+ * @param do_reset	if TRUE, clear total drops after updating
-+ */
-+u32 qm_read_drop_stat(u32 tmu, u32 queue, u32 *total_drops, int do_reset)
-+{
-+	static u32 qtotal[TMU_MAX_ID + 1][NUM_QUEUES];
-+	u32 val;
-+
-+	writel((tmu << 8) | queue, TMU_TEQ_CTRL);
-+	writel((tmu << 8) | queue, TMU_LLM_CTRL);
-+	val = readl(TMU_TEQ_DROP_STAT);
-+	qtotal[tmu][queue] += val;
-+	if (total_drops)
-+		*total_drops = qtotal[tmu][queue];
-+	if (do_reset)
-+		qtotal[tmu][queue] = 0;
-+	return val;
-+}
-+
-+static ssize_t tmu_queue_stats(char *buf, int tmu, int queue)
-+{
-+	ssize_t len = 0;
-+	u32 drops;
-+
-+	len += sprintf(buf + len, "%d-%02d, ", tmu, queue);
-+
-+	drops = qm_read_drop_stat(tmu, queue, NULL, 0);
-+
-+	/* Select queue */
-+	writel((tmu << 8) | queue, TMU_TEQ_CTRL);
-+	writel((tmu << 8) | queue, TMU_LLM_CTRL);
-+
-+	len += sprintf(buf + len,
-+			"(teq) drop: %10u, tx: %10u (llm) head: %08x, tail: %08x, drop: %10u\n",
-+		drops, readl(TMU_TEQ_TRANS_STAT),
-+		readl(TMU_LLM_QUE_HEADPTR), readl(TMU_LLM_QUE_TAILPTR),
-+		readl(TMU_LLM_QUE_DROPCNT));
-+
-+	return len;
-+}
-+
-+static ssize_t tmu_queues(char *buf, int tmu)
-+{
-+	ssize_t len = 0;
-+	int queue;
-+
-+	for (queue = 0; queue < 16; queue++)
-+		len += tmu_queue_stats(buf + len, tmu, queue);
-+
-+	return len;
-+}
-+
-+static ssize_t block_version(char *buf, void *addr)
-+{
-+	ssize_t len = 0;
-+	u32 val;
-+
-+	val = readl(addr);
-+	len += sprintf(buf + len, "revision: %x, version: %x, id: %x\n",
-+		(val >> 24) & 0xff, (val >> 16) & 0xff, val & 0xffff);
-+
-+	return len;
-+}
-+
-+static ssize_t bmu(char *buf, int id, void *base)
-+{
-+	ssize_t len = 0;
-+
-+	len += sprintf(buf + len, "%s: %d\n  ", __func__, id);
-+
-+	len += block_version(buf + len, base + BMU_VERSION);
-+
-+	len += sprintf(buf + len, "  buf size:  %x\n", (1 << readl(base +
-+			BMU_BUF_SIZE)));
-+	len += sprintf(buf + len, "  buf count: %x\n", readl(base +
-+			BMU_BUF_CNT));
-+	len += sprintf(buf + len, "  buf rem:   %x\n", readl(base +
-+			BMU_REM_BUF_CNT));
-+	len += sprintf(buf + len, "  buf curr:  %x\n", readl(base +
-+			BMU_CURR_BUF_CNT));
-+	len += sprintf(buf + len, "  free err:  %x\n", readl(base +
-+			BMU_FREE_ERR_ADDR));
-+
-+	return len;
-+}
-+
-+static ssize_t gpi(char *buf, int id, void *base)
-+{
-+	ssize_t len = 0;
-+	u32 val;
-+
-+	len += sprintf(buf + len, "%s%d:\n  ", __func__, id);
-+	len += block_version(buf + len, base + GPI_VERSION);
-+
-+	len += sprintf(buf + len, "  tx under stick: %x\n", readl(base +
-+			GPI_FIFO_STATUS));
-+	val = readl(base + GPI_FIFO_DEBUG);
-+	len += sprintf(buf + len, "  tx pkts:        %x\n", (val >> 23) &
-+			0x3f);
-+	len += sprintf(buf + len, "  rx pkts:        %x\n", (val >> 18) &
-+			0x3f);
-+	len += sprintf(buf + len, "  tx bytes:       %x\n", (val >> 9) &
-+			0x1ff);
-+	len += sprintf(buf + len, "  rx bytes:       %x\n", (val >> 0) &
-+			0x1ff);
-+	len += sprintf(buf + len, "  overrun:        %x\n", readl(base +
-+			GPI_OVERRUN_DROPCNT));
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_set_class(struct device *dev, struct device_attribute *attr,
-+			     const char *buf, size_t count)
-+{
-+	class_do_clear = kstrtoul(buf, 0, 0);
-+	return count;
-+}
-+
-+static ssize_t pfe_show_class(struct device *dev, struct device_attribute *attr,
-+			      char *buf)
-+{
-+	ssize_t len = 0;
-+	int id;
-+	u32 val;
-+	struct pfe_cpumon *cpumon = &pfe->cpumon;
-+
-+	len += block_version(buf + len, CLASS_VERSION);
-+
-+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
-+		len += sprintf(buf + len, "%d: ", id - CLASS0_ID);
-+
-+		val = readl(CLASS_PE0_DEBUG + id * 4);
-+		len += sprintf(buf + len, "pc=1%04x ", val & 0xffff);
-+
-+		len += display_pe_status(buf + len, id, CLASS_DM_PESTATUS,
-+						class_do_clear);
-+	}
-+	len += sprintf(buf + len, "aggregate load=%d%%\n\n",
-+			cpumon->class_usage_pct);
-+
-+	len += sprintf(buf + len, "pe status:   0x%x\n",
-+			readl(CLASS_PE_STATUS));
-+	len += sprintf(buf + len, "max buf cnt: 0x%x   afull thres: 0x%x\n",
-+			readl(CLASS_MAX_BUF_CNT), readl(CLASS_AFULL_THRES));
-+	len += sprintf(buf + len, "tsq max cnt: 0x%x   tsq fifo thres: 0x%x\n",
-+			readl(CLASS_TSQ_MAX_CNT), readl(CLASS_TSQ_FIFO_THRES));
-+	len += sprintf(buf + len, "state:       0x%x\n", readl(CLASS_STATE));
-+
-+	len += class_phy_stats(buf + len, 0);
-+	len += class_phy_stats(buf + len, 1);
-+	len += class_phy_stats(buf + len, 2);
-+	len += class_phy_stats(buf + len, 3);
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_set_tmu(struct device *dev, struct device_attribute *attr,
-+			   const char *buf, size_t count)
-+{
-+	tmu_do_clear = kstrtoul(buf, 0, 0);
-+	return count;
-+}
-+
-+static ssize_t pfe_show_tmu(struct device *dev, struct device_attribute *attr,
-+			    char *buf)
-+{
-+	ssize_t len = 0;
-+	int id;
-+	u32 val;
-+
-+	len += block_version(buf + len, TMU_VERSION);
-+
-+	for (id = TMU0_ID; id <= TMU_MAX_ID; id++) {
-+		if (id == TMU2_ID)
-+			continue;
-+		len += sprintf(buf + len, "%d: ", id - TMU0_ID);
-+
-+		len += display_pe_status(buf + len, id, TMU_DM_PESTATUS,
-+						tmu_do_clear);
-+	}
-+
-+	len += sprintf(buf + len, "pe status:    %x\n", readl(TMU_PE_STATUS));
-+	len += sprintf(buf + len, "inq fifo cnt: %x\n",
-+			readl(TMU_PHY_INQ_FIFO_CNT));
-+	val = readl(TMU_INQ_STAT);
-+	len += sprintf(buf + len, "inq wr ptr:     %x\n", val & 0x3ff);
-+	len += sprintf(buf + len, "inq rd ptr:     %x\n", val >> 10);
-+
-+	return len;
-+}
-+
-+static unsigned long drops_do_clear;
-+static u32 class_drop_counter[CLASS_NUM_DROP_COUNTERS];
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+static u32 util_drop_counter[UTIL_NUM_DROP_COUNTERS];
-+#endif
-+
-+char *class_drop_description[CLASS_NUM_DROP_COUNTERS] = {
-+	"ICC",
-+	"Host Pkt Error",
-+	"Rx Error",
-+	"IPsec Outbound",
-+	"IPsec Inbound",
-+	"EXPT IPsec Error",
-+	"Reassembly",
-+	"Fragmenter",
-+	"NAT-T",
-+	"Socket",
-+	"Multicast",
-+	"NAT-PT",
-+	"Tx Disabled",
-+};
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+char *util_drop_description[UTIL_NUM_DROP_COUNTERS] = {
-+	"IPsec Outbound",
-+	"IPsec Inbound",
-+	"IPsec Rate Limiter",
-+	"Fragmenter",
-+	"Socket",
-+	"Tx Disabled",
-+	"Rx Error",
-+};
-+#endif
-+
-+static ssize_t pfe_set_drops(struct device *dev, struct device_attribute *attr,
-+			     const char *buf, size_t count)
-+{
-+	drops_do_clear = kstrtoul(buf, 0, 0);
-+	return count;
-+}
-+
-+static u32 tmu_drops[4][16];
-+static ssize_t pfe_show_drops(struct device *dev, struct device_attribute *attr,
-+			      char *buf)
-+{
-+	ssize_t len = 0;
-+	int id, dropnum;
-+	int tmu, queue;
-+	u32 val;
-+	u32 dmem_addr;
-+	int num_class_drops = 0, num_tmu_drops = 0, num_util_drops = 0;
-+	struct pfe_ctrl *ctrl = &pfe->ctrl;
-+
-+	memset(class_drop_counter, 0, sizeof(class_drop_counter));
-+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
-+		if (drops_do_clear)
-+			pe_sync_stop(ctrl, (1 << id));
-+		for (dropnum = 0; dropnum < CLASS_NUM_DROP_COUNTERS;
-+			dropnum++) {
-+			dmem_addr = CLASS_DM_DROP_CNTR;
-+			val = be32_to_cpu(pe_dmem_read(id, dmem_addr, 4));
-+			class_drop_counter[dropnum] += val;
-+			num_class_drops += val;
-+			if (drops_do_clear)
-+				pe_dmem_write(id, 0, dmem_addr, 4);
-+		}
-+		if (drops_do_clear)
-+			pe_start(ctrl, (1 << id));
-+	}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	if (drops_do_clear)
-+		pe_sync_stop(ctrl, (1 << UTIL_ID));
-+	for (dropnum = 0; dropnum < UTIL_NUM_DROP_COUNTERS; dropnum++) {
-+		dmem_addr = UTIL_DM_DROP_CNTR;
-+		val = be32_to_cpu(pe_dmem_read(UTIL_ID, dmem_addr, 4));
-+		util_drop_counter[dropnum] = val;
-+		num_util_drops += val;
-+		if (drops_do_clear)
-+			pe_dmem_write(UTIL_ID, 0, dmem_addr, 4);
-+	}
-+	if (drops_do_clear)
-+		pe_start(ctrl, (1 << UTIL_ID));
-+#endif
-+	for (tmu = 0; tmu < 4; tmu++) {
-+		for (queue = 0; queue < 16; queue++) {
-+			qm_read_drop_stat(tmu, queue, &tmu_drops[tmu][queue],
-+					  drops_do_clear);
-+			num_tmu_drops += tmu_drops[tmu][queue];
-+		}
-+	}
-+
-+	if (num_class_drops == 0 && num_util_drops == 0 && num_tmu_drops == 0)
-+		len += sprintf(buf + len, "No PE drops\n\n");
-+
-+	if (num_class_drops > 0) {
-+		len += sprintf(buf + len, "Class PE drops --\n");
-+		for (dropnum = 0; dropnum < CLASS_NUM_DROP_COUNTERS;
-+			dropnum++) {
-+			if (class_drop_counter[dropnum] > 0)
-+				len += sprintf(buf + len, "  %s: %d\n",
-+					class_drop_description[dropnum],
-+					class_drop_counter[dropnum]);
-+		}
-+		len += sprintf(buf + len, "\n");
-+	}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	if (num_util_drops > 0) {
-+		len += sprintf(buf + len, "Util PE drops --\n");
-+		for (dropnum = 0; dropnum < UTIL_NUM_DROP_COUNTERS; dropnum++) {
-+			if (util_drop_counter[dropnum] > 0)
-+				len += sprintf(buf + len, "  %s: %d\n",
-+					util_drop_description[dropnum],
-+					util_drop_counter[dropnum]);
-+		}
-+		len += sprintf(buf + len, "\n");
-+	}
-+#endif
-+	if (num_tmu_drops > 0) {
-+		len += sprintf(buf + len, "TMU drops --\n");
-+		for (tmu = 0; tmu < 4; tmu++) {
-+			for (queue = 0; queue < 16; queue++) {
-+				if (tmu_drops[tmu][queue] > 0)
-+					len += sprintf(buf + len,
-+						"  TMU%d-Q%d: %d\n"
-+					, tmu, queue, tmu_drops[tmu][queue]);
-+			}
-+		}
-+		len += sprintf(buf + len, "\n");
-+	}
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_show_tmu0_queues(struct device *dev, struct device_attribute
-+					*attr, char *buf)
-+{
-+	return tmu_queues(buf, 0);
-+}
-+
-+static ssize_t pfe_show_tmu1_queues(struct device *dev, struct device_attribute
-+					*attr, char *buf)
-+{
-+	return tmu_queues(buf, 1);
-+}
-+
-+static ssize_t pfe_show_tmu2_queues(struct device *dev, struct device_attribute
-+					*attr, char *buf)
-+{
-+	return tmu_queues(buf, 2);
-+}
-+
-+static ssize_t pfe_show_tmu3_queues(struct device *dev, struct device_attribute
-+					*attr, char *buf)
-+{
-+	return tmu_queues(buf, 3);
-+}
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+static ssize_t pfe_set_util(struct device *dev, struct device_attribute *attr,
-+			    const char *buf, size_t count)
-+{
-+	util_do_clear = kstrtoul(buf, NULL, 0);
-+	return count;
-+}
-+
-+static ssize_t pfe_show_util(struct device *dev, struct device_attribute *attr,
-+			     char *buf)
-+{
-+	ssize_t len = 0;
-+	struct pfe_ctrl *ctrl = &pfe->ctrl;
-+
-+	len += block_version(buf + len, UTIL_VERSION);
-+
-+	pe_sync_stop(ctrl, (1 << UTIL_ID));
-+	len += display_pe_status(buf + len, UTIL_ID, UTIL_DM_PESTATUS,
-+					util_do_clear);
-+	pe_start(ctrl, (1 << UTIL_ID));
-+
-+	len += sprintf(buf + len, "pe status:   %x\n", readl(UTIL_PE_STATUS));
-+	len += sprintf(buf + len, "max buf cnt: %x\n",
-+			readl(UTIL_MAX_BUF_CNT));
-+	len += sprintf(buf + len, "tsq max cnt: %x\n",
-+			readl(UTIL_TSQ_MAX_CNT));
-+
-+	return len;
-+}
-+#endif
-+
-+static ssize_t pfe_show_bmu(struct device *dev, struct device_attribute *attr,
-+			    char *buf)
-+{
-+	ssize_t len = 0;
-+
-+	len += bmu(buf + len, 1, BMU1_BASE_ADDR);
-+	len += bmu(buf + len, 2, BMU2_BASE_ADDR);
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_show_hif(struct device *dev, struct device_attribute *attr,
-+			    char *buf)
-+{
-+	ssize_t len = 0;
-+
-+	len += sprintf(buf + len, "hif:\n  ");
-+	len += block_version(buf + len, HIF_VERSION);
-+
-+	len += sprintf(buf + len, "  tx curr bd:    %x\n",
-+			readl(HIF_TX_CURR_BD_ADDR));
-+	len += sprintf(buf + len, "  tx status:     %x\n",
-+			readl(HIF_TX_STATUS));
-+	len += sprintf(buf + len, "  tx dma status: %x\n",
-+			readl(HIF_TX_DMA_STATUS));
-+
-+	len += sprintf(buf + len, "  rx curr bd:    %x\n",
-+			readl(HIF_RX_CURR_BD_ADDR));
-+	len += sprintf(buf + len, "  rx status:     %x\n",
-+			readl(HIF_RX_STATUS));
-+	len += sprintf(buf + len, "  rx dma status: %x\n",
-+			readl(HIF_RX_DMA_STATUS));
-+
-+	len += sprintf(buf + len, "hif nocopy:\n  ");
-+	len += block_version(buf + len, HIF_NOCPY_VERSION);
-+
-+	len += sprintf(buf + len, "  tx curr bd:    %x\n",
-+			readl(HIF_NOCPY_TX_CURR_BD_ADDR));
-+	len += sprintf(buf + len, "  tx status:     %x\n",
-+			readl(HIF_NOCPY_TX_STATUS));
-+	len += sprintf(buf + len, "  tx dma status: %x\n",
-+			readl(HIF_NOCPY_TX_DMA_STATUS));
-+
-+	len += sprintf(buf + len, "  rx curr bd:    %x\n",
-+			readl(HIF_NOCPY_RX_CURR_BD_ADDR));
-+	len += sprintf(buf + len, "  rx status:     %x\n",
-+			readl(HIF_NOCPY_RX_STATUS));
-+	len += sprintf(buf + len, "  rx dma status: %x\n",
-+			readl(HIF_NOCPY_RX_DMA_STATUS));
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_show_gpi(struct device *dev, struct device_attribute *attr,
-+			    char *buf)
-+{
-+	ssize_t len = 0;
-+
-+	len += gpi(buf + len, 0, EGPI1_BASE_ADDR);
-+	len += gpi(buf + len, 1, EGPI2_BASE_ADDR);
-+	len += gpi(buf + len, 3, HGPI_BASE_ADDR);
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_show_pfemem(struct device *dev, struct device_attribute
-+				*attr, char *buf)
-+{
-+	ssize_t len = 0;
-+	struct pfe_memmon *memmon = &pfe->memmon;
-+
-+	len += sprintf(buf + len, "Kernel Memory: %d Bytes (%d KB)\n",
-+		memmon->kernel_memory_allocated,
-+		(memmon->kernel_memory_allocated + 1023) / 1024);
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_show_crc_revalidated(struct device *dev,
-+					struct device_attribute *attr,
-+					char *buf)
-+{
-+	u64 crc_validated = 0;
-+	ssize_t len = 0;
-+	int id, phyid;
-+
-+	len += sprintf(buf + len, "FCS re-validated by PFE:\n");
-+
-+	for (phyid = 0; phyid < 2; phyid++) {
-+		crc_validated = 0;
-+		for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
-+			crc_validated += be32_to_cpu(pe_dmem_read(id,
-+				CLASS_DM_CRC_VALIDATED + (phyid * 4), 4));
-+		}
-+		len += sprintf(buf + len, "MAC %d:\n    count:%10llu\n",
-+			       phyid, crc_validated);
-+	}
-+
-+	return len;
-+}
-+
-+#ifdef HIF_NAPI_STATS
-+static ssize_t pfe_show_hif_napi_stats(struct device *dev,
-+				       struct device_attribute *attr,
-+				       char *buf)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct pfe *pfe = platform_get_drvdata(pdev);
-+	ssize_t len = 0;
-+
-+	len += sprintf(buf + len, "sched:  %u\n",
-+			pfe->hif.napi_counters[NAPI_SCHED_COUNT]);
-+	len += sprintf(buf + len, "poll:   %u\n",
-+			pfe->hif.napi_counters[NAPI_POLL_COUNT]);
-+	len += sprintf(buf + len, "packet: %u\n",
-+			pfe->hif.napi_counters[NAPI_PACKET_COUNT]);
-+	len += sprintf(buf + len, "budget: %u\n",
-+			pfe->hif.napi_counters[NAPI_FULL_BUDGET_COUNT]);
-+	len += sprintf(buf + len, "desc:   %u\n",
-+			pfe->hif.napi_counters[NAPI_DESC_COUNT]);
-+	len += sprintf(buf + len, "full:   %u\n",
-+			pfe->hif.napi_counters[NAPI_CLIENT_FULL_COUNT]);
-+
-+	return len;
-+}
-+
-+static ssize_t pfe_set_hif_napi_stats(struct device *dev,
-+				      struct device_attribute *attr,
-+					const char *buf, size_t count)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct pfe *pfe = platform_get_drvdata(pdev);
-+
-+	memset(pfe->hif.napi_counters, 0, sizeof(pfe->hif.napi_counters));
-+
-+	return count;
-+}
-+
-+static DEVICE_ATTR(hif_napi_stats, 0644, pfe_show_hif_napi_stats,
-+			pfe_set_hif_napi_stats);
-+#endif
-+
-+static DEVICE_ATTR(class, 0644, pfe_show_class, pfe_set_class);
-+static DEVICE_ATTR(tmu, 0644, pfe_show_tmu, pfe_set_tmu);
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+static DEVICE_ATTR(util, 0644, pfe_show_util, pfe_set_util);
-+#endif
-+static DEVICE_ATTR(bmu, 0444, pfe_show_bmu, NULL);
-+static DEVICE_ATTR(hif, 0444, pfe_show_hif, NULL);
-+static DEVICE_ATTR(gpi, 0444, pfe_show_gpi, NULL);
-+static DEVICE_ATTR(drops, 0644, pfe_show_drops, pfe_set_drops);
-+static DEVICE_ATTR(tmu0_queues, 0444, pfe_show_tmu0_queues, NULL);
-+static DEVICE_ATTR(tmu1_queues, 0444, pfe_show_tmu1_queues, NULL);
-+static DEVICE_ATTR(tmu2_queues, 0444, pfe_show_tmu2_queues, NULL);
-+static DEVICE_ATTR(tmu3_queues, 0444, pfe_show_tmu3_queues, NULL);
-+static DEVICE_ATTR(pfemem, 0444, pfe_show_pfemem, NULL);
-+static DEVICE_ATTR(fcs_revalidated, 0444, pfe_show_crc_revalidated, NULL);
-+
-+int pfe_sysfs_init(struct pfe *pfe)
-+{
-+	if (device_create_file(pfe->dev, &dev_attr_class))
-+		goto err_class;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_tmu))
-+		goto err_tmu;
-+
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	if (device_create_file(pfe->dev, &dev_attr_util))
-+		goto err_util;
-+#endif
-+
-+	if (device_create_file(pfe->dev, &dev_attr_bmu))
-+		goto err_bmu;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_hif))
-+		goto err_hif;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_gpi))
-+		goto err_gpi;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_drops))
-+		goto err_drops;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_tmu0_queues))
-+		goto err_tmu0_queues;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_tmu1_queues))
-+		goto err_tmu1_queues;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_tmu2_queues))
-+		goto err_tmu2_queues;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_tmu3_queues))
-+		goto err_tmu3_queues;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_pfemem))
-+		goto err_pfemem;
-+
-+	if (device_create_file(pfe->dev, &dev_attr_fcs_revalidated))
-+		goto err_crc_revalidated;
-+
-+#ifdef HIF_NAPI_STATS
-+	if (device_create_file(pfe->dev, &dev_attr_hif_napi_stats))
-+		goto err_hif_napi_stats;
-+#endif
-+
-+	return 0;
-+
-+#ifdef HIF_NAPI_STATS
-+err_hif_napi_stats:
-+	device_remove_file(pfe->dev, &dev_attr_fcs_revalidated);
-+#endif
-+
-+err_crc_revalidated:
-+	device_remove_file(pfe->dev, &dev_attr_pfemem);
-+
-+err_pfemem:
-+	device_remove_file(pfe->dev, &dev_attr_tmu3_queues);
-+
-+err_tmu3_queues:
-+	device_remove_file(pfe->dev, &dev_attr_tmu2_queues);
-+
-+err_tmu2_queues:
-+	device_remove_file(pfe->dev, &dev_attr_tmu1_queues);
-+
-+err_tmu1_queues:
-+	device_remove_file(pfe->dev, &dev_attr_tmu0_queues);
-+
-+err_tmu0_queues:
-+	device_remove_file(pfe->dev, &dev_attr_drops);
-+
-+err_drops:
-+	device_remove_file(pfe->dev, &dev_attr_gpi);
-+
-+err_gpi:
-+	device_remove_file(pfe->dev, &dev_attr_hif);
-+
-+err_hif:
-+	device_remove_file(pfe->dev, &dev_attr_bmu);
-+
-+err_bmu:
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	device_remove_file(pfe->dev, &dev_attr_util);
-+
-+err_util:
-+#endif
-+	device_remove_file(pfe->dev, &dev_attr_tmu);
-+
-+err_tmu:
-+	device_remove_file(pfe->dev, &dev_attr_class);
-+
-+err_class:
-+	return -1;
-+}
-+
-+void pfe_sysfs_exit(struct pfe *pfe)
-+{
-+#ifdef HIF_NAPI_STATS
-+	device_remove_file(pfe->dev, &dev_attr_hif_napi_stats);
-+#endif
-+	device_remove_file(pfe->dev, &dev_attr_fcs_revalidated);
-+	device_remove_file(pfe->dev, &dev_attr_pfemem);
-+	device_remove_file(pfe->dev, &dev_attr_tmu3_queues);
-+	device_remove_file(pfe->dev, &dev_attr_tmu2_queues);
-+	device_remove_file(pfe->dev, &dev_attr_tmu1_queues);
-+	device_remove_file(pfe->dev, &dev_attr_tmu0_queues);
-+	device_remove_file(pfe->dev, &dev_attr_drops);
-+	device_remove_file(pfe->dev, &dev_attr_gpi);
-+	device_remove_file(pfe->dev, &dev_attr_hif);
-+	device_remove_file(pfe->dev, &dev_attr_bmu);
-+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
-+	device_remove_file(pfe->dev, &dev_attr_util);
-+#endif
-+	device_remove_file(pfe->dev, &dev_attr_tmu);
-+	device_remove_file(pfe->dev, &dev_attr_class);
-+}
---- /dev/null
-+++ b/drivers/staging/fsl_ppfe/pfe_sysfs.h
-@@ -0,0 +1,17 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+/*
-+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
-+ * Copyright 2017 NXP
-+ */
-+
-+#ifndef _PFE_SYSFS_H_
-+#define _PFE_SYSFS_H_
-+
-+#include <linux/proc_fs.h>
-+
-+u32 qm_read_drop_stat(u32 tmu, u32 queue, u32 *total_drops, int do_reset);
-+
-+int pfe_sysfs_init(struct pfe *pfe);
-+void pfe_sysfs_exit(struct pfe *pfe);
-+
-+#endif /* _PFE_SYSFS_H_ */
diff --git a/target/linux/layerscape/patches-5.10/702-phy-Add-2.5G-SGMII-interface-mode.patch b/target/linux/layerscape/patches-5.10/702-phy-Add-2.5G-SGMII-interface-mode.patch
deleted file mode 100644
index 53677c0416db..000000000000
--- a/target/linux/layerscape/patches-5.10/702-phy-Add-2.5G-SGMII-interface-mode.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From c918c472546afa83a619ae3cb1a9d7d346c6e288 Mon Sep 17 00:00:00 2001
-From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
-Date: Wed, 29 Nov 2017 15:27:57 +0530
-Subject: [PATCH 154/173] phy: Add 2.5G SGMII interface mode
-
-Add 2.5G SGMII interface mode(PHY_INTERFACE_MODE_2500SGMII)
-in existing phy_interface list
-
-Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
----
- include/linux/phy.h | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -146,6 +146,7 @@ typedef enum {
- 	PHY_INTERFACE_MODE_USXGMII,
- 	/* 10GBASE-KR - with Clause 73 AN */
- 	PHY_INTERFACE_MODE_10GKR,
-+	PHY_INTERFACE_MODE_2500SGMII,
- 	PHY_INTERFACE_MODE_MAX,
- } phy_interface_t;
- 
-@@ -221,6 +222,8 @@ static inline const char *phy_modes(phy_
- 		return "10gbase-kr";
- 	case PHY_INTERFACE_MODE_100BASEX:
- 		return "100base-x";
-+	case PHY_INTERFACE_MODE_2500SGMII:
-+		return "sgmii-2500";
- 	default:
- 		return "unknown";
- 	}
diff --git a/target/linux/malta/config-5.10 b/target/linux/malta/config-5.10
deleted file mode 100644
index e4f56229a959..000000000000
--- a/target/linux/malta/config-5.10
+++ /dev/null
@@ -1,275 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ATA=y
-CONFIG_ATA_PIIX=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-# CONFIG_BLK_DEV_DM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOARD_SCACHE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_BOUNCE=y
-CONFIG_BUILTIN_DTB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKBLD_I8253=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_I8253=y
-CONFIG_CLKSRC_I8253=y
-CONFIG_CLKSRC_MIPS_GIC=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_CPU_HAS_SMARTMIPS is not set
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_MICROMIPS is not set
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS32_3_5_FEATURES is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS32_R5 is not set
-# CONFIG_CPU_MIPS32_R5_FEATURES is not set
-# CONFIG_CPU_MIPS32_R6 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_MIPS64_R6 is not set
-# CONFIG_CPU_MIPSR2 is not set
-# CONFIG_CPU_MIPSR2_IRQ_EI is not set
-# CONFIG_CPU_MIPSR2_IRQ_VI is not set
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-# CONFIG_CPU_NEVADA is not set
-CONFIG_CPU_R4K_CACHE_TLB=y
-# CONFIG_CPU_RM7000 is not set
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_MAYBE_COHERENT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HW_CONSOLE=y
-CONFIG_I8253=y
-CONFIG_I8253_LOCK=y
-CONFIG_I8259=y
-CONFIG_INPUT=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-CONFIG_JBD2=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_KALLSYMS=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MD=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_BONITO64=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-CONFIG_MIPS_CM=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_MIPS_CMDLINE_FROM_DTB is not set
-# CONFIG_MIPS_CMP is not set
-CONFIG_MIPS_CPC=y
-# CONFIG_MIPS_CPS is not set
-CONFIG_MIPS_CPU_SCACHE=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_EXTERNAL_TIMER=y
-CONFIG_MIPS_GIC=y
-CONFIG_MIPS_L1_CACHE_SHIFT=6
-CONFIG_MIPS_L1_CACHE_SHIFT_6=y
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-CONFIG_MIPS_MALTA=y
-CONFIG_MIPS_MSC=y
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_MIPS_NO_APPENDED_DTB=y
-CONFIG_MIPS_NR_CPU_NR_MAP=2
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
-# CONFIG_MIPS_RAW_APPENDED_DTB is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_CFI_STAA=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=2
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PATA_LEGACY=y
-CONFIG_PATA_TIMINGS=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PCI_GT64XXX_PCI0=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_PIIX4_POWEROFF=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_QUOTA=y
-CONFIG_QUOTACTL=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_QUOTA_TREE=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RELAY=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_SATA_HOST=y
-CONFIG_SCSI=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-CONFIG_SRCU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS32_R3_5=y
-CONFIG_SYS_HAS_CPU_MIPS32_R5=y
-CONFIG_SYS_HAS_CPU_MIPS32_R6=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_SYS_HAS_CPU_MIPS64_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R6=y
-CONFIG_SYS_HAS_CPU_NEVADA=y
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MICROMIPS=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_MIPS_CMP=y
-CONFIG_SYS_SUPPORTS_MIPS_CPS=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_RELOCATABLE=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMARTMIPS=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_SYS_SUPPORTS_VPE_LOADER=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=1
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_VXFS_FS=y
-CONFIG_WAR_ICACHE_REFILLS=y
-CONFIG_XPS=y
diff --git a/target/linux/mpc85xx/config-5.10 b/target/linux/mpc85xx/config-5.10
deleted file mode 100644
index c2044fabd057..000000000000
--- a/target/linux/mpc85xx/config-5.10
+++ /dev/null
@@ -1,269 +0,0 @@
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS=11
-CONFIG_ARCH_MMAP_RND_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_BITS_MIN=11
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
-CONFIG_ASN1=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOOKE=y
-CONFIG_BOOKE_WDT=y
-# CONFIG_BSC9131_RDB is not set
-# CONFIG_BSC9132_QDS is not set
-# CONFIG_C293_PCIE is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CMDLINE="console=ttyS0,115200"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_COMMON_CLK is not set
-CONFIG_COMPAT_32BIT_TIME=y
-# CONFIG_CORENET_GENERIC is not set
-# CONFIG_CPM2 is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CRYPTO_AES_PPC_SPE is not set
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
-# CONFIG_CRYPTO_MD5_PPC is not set
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RSA=y
-# CONFIG_CRYPTO_SHA1_PPC is not set
-# CONFIG_CRYPTO_SHA1_PPC_SPE is not set
-# CONFIG_CRYPTO_SHA256_PPC_SPE is not set
-CONFIG_DATA_SHIFT=12
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_E500_CPU=y
-# CONFIG_E5500_CPU is not set
-# CONFIG_E6500_CPU is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_LEGACY_SYSFS=y
-CONFIG_EDAC_MPC85XX=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_FSL_FMAN is not set
-CONFIG_FSL_LBC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_SOC_BOOKE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GEN_RTC=y
-# CONFIG_GE_IMP3A is not set
-CONFIG_GIANFAR=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HIVEAP_330 is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_MPC=y
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_KSI8560 is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LXT_PHY=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MMU_GATHER_PAGE_SIZE=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC85xx_RDB is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_MSGR is not set
-CONFIG_MPIC_TIMER=y
-CONFIG_MPILIB=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-# CONFIG_MVME2500 is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NLS=y
-CONFIG_NR_IRQS=512
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DMA_DEFAULT_COHERENT=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-# CONFIG_P1010_RDB is not set
-# CONFIG_P1022_DS is not set
-# CONFIG_P1022_RDK is not set
-# CONFIG_P1023_RDB is not set
-CONFIG_PAGE_OFFSET=0xc0000000
-# CONFIG_PANDA is not set
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_PHYSICAL_START=0x00000000
-# CONFIG_PHYS_64BIT is not set
-# CONFIG_PMU_SYSFS is not set
-# CONFIG_PPA8548 is not set
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_BARRIER_NOSPEC=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_BOOK3S_6xx is not set
-CONFIG_PPC_DOORBELL=y
-# CONFIG_PPC_E500MC is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-CONFIG_PPC_FSL_BOOK3E=y
-CONFIG_PPC_INDIRECT_PCI=y
-# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_PAGE_SHIFT=12
-# CONFIG_PPC_PTDUMP is not set
-# CONFIG_PPC_QEMU_E500 is not set
-CONFIG_PPC_SMP_MUXED_IPI=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-CONFIG_QE_GPIO=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_RAS=y
-# CONFIG_RED_15W_REV1 is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GENERIC=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-# CONFIG_SBC8548 is not set
-# CONFIG_SCOM_DEBUGFS is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_QE is not set
-# CONFIG_SOCRATES is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPE=y
-CONFIG_SPE_POSSIBLE=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_TARGET_CPU="8540"
-CONFIG_TARGET_CPU_BOOL=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_THREAD_SHIFT=13
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-# CONFIG_TL_WDR4900_V1 is not set
-# CONFIG_FIREBOX_T10 is not set
-# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_TWR_P102x is not set
-CONFIG_UCC=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_VDSO32=y
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WS_AP3710I is not set
-# CONFIG_WS_AP3825I is not set
-# CONFIG_XES_MPC85xx is not set
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
diff --git a/target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
deleted file mode 100644
index 5e5ab10daf1d..000000000000
--- a/target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/powerpc/platforms/85xx/common.c
-+++ b/arch/powerpc/platforms/85xx/common.c
-@@ -30,6 +30,7 @@ static const struct of_device_id mpc85xx
- 	{ .compatible = "fsl,mpc8548-guts", },
- 	/* Probably unnecessary? */
- 	{ .compatible = "gpio-leds", },
-+	{ .compatible = "gpio-keys", },
- 	/* For all PCI controllers */
- 	{ .compatible = "fsl,mpc8540-pci", },
- 	{ .compatible = "fsl,mpc8548-pcie", },
diff --git a/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1-support.patch
deleted file mode 100644
index 133364854ab7..000000000000
--- a/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1-support.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 20 Feb 2013 08:40:33 +0100
-Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
- board
-
-This patch adds support for the TP-Link TL-WDR4900 v1
-concurrent dual-band wireless router. The devices uses
-the Freescale P1014 SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/Makefile           |  3 ++-
- arch/powerpc/boot/wrapper            |  5 +++++
- arch/powerpc/platforms/85xx/Kconfig  | 12 ++++++++++++
- arch/powerpc/platforms/85xx/Makefile |  1 +
- 4 files changed, 20 insertions(+), 1 deletion(-)
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -158,6 +158,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
- src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
-+src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
- 
- src-wlib := $(sort $(src-wlib-y))
- src-plat := $(sort $(src-plat-y))
-@@ -337,7 +338,7 @@ image-$(CONFIG_TQM8555)			+= cuImage.tqm
- image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
- image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
- image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
--
-+image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
- 
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -324,6 +324,11 @@ adder875-redboot)
-     platformo="$object/fixed-head.o $object/redboot-8xx.o"
-     binary=y
-     ;;
-+simpleboot-tl-wdr4900-v1)
-+    platformo="$object/fixed-head.o $object/simpleboot.o"
-+    link_address='0x1000000'
-+    binary=y
-+    ;;
- simpleboot-*)
-     platformo="$object/fixed-head.o $object/simpleboot.o"
-     binary=y
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -170,6 +170,18 @@ config STX_GP3
- 	select CPM2
- 	select DEFAULT_UIMAGE
- 
-+config TL_WDR4900_V1
-+    bool "TP-Link TL-WDR4900 v1"
-+    select DEFAULT_UIMAGE
-+    select ARCH_REQUIRE_GPIOLIB
-+    select GPIO_MPC8XXX
-+    select SWIOTLB
-+    help
-+      This option enables support for the TP-Link TL-WDR4900 v1 board.
-+
-+      This board is a Concurrent Dual-Band wireless router with a
-+      Freescale P1014 SoC.
-+
- config TQM8540
- 	bool "TQ Components TQM8540"
- 	help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_CORENET_GENERIC)   += coren
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
- obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
- obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
-+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
- obj-$(CONFIG_SBC8548)     += sbc8548.o
- obj-$(CONFIG_PPA8548)     += ppa8548.o
- obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
diff --git a/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330-support.patch
deleted file mode 100644
index da95cd271621..000000000000
--- a/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -49,6 +49,17 @@ config BSC9132_QDS
- 	  and dual StarCore SC3850 DSP cores.
- 	  Manufacturer : Freescale Semiconductor, Inc
- 
-+config HIVEAP_330
-+    bool "Aerohive HiveAP-330"
-+    select DEFAULT_UIMAGE
-+    select ARCH_REQUIRE_GPIOLIB
-+    select GPIO_MPC8XXX
-+    help
-+      This option enables support for the Aerohive HiveAP-330 board.
-+
-+      This board is a Concurrent Dual-Band wireless access point with a
-+      Freescale P1020 SoC.
-+
- config MPC8540_ADS
- 	bool "Freescale MPC8540 ADS"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -12,6 +12,7 @@ obj-y += common.o
- obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
- obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
- obj-$(CONFIG_C293_PCIE)   += c293pcie.o
-+obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
- obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/target/linux/mpc85xx/patches-5.10/102-powerpc-add-cmdline-override.patch b/target/linux/mpc85xx/patches-5.10/102-powerpc-add-cmdline-override.patch
deleted file mode 100644
index 95ce5f2bb914..000000000000
--- a/target/linux/mpc85xx/patches-5.10/102-powerpc-add-cmdline-override.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/arch/powerpc/Kconfig
-+++ b/arch/powerpc/Kconfig
-@@ -931,6 +931,14 @@ config CMDLINE_FORCE
- 
- endchoice
- 
-+config CMDLINE_OVERRIDE
-+    bool "Use alternative cmdline from device tree"
-+    help
-+      Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
-+      be used, this is not a good option for kernels that are shared across
-+      devices. This setting enables using "chosen/cmdline-override" as the
-+      cmdline if it exists in the device tree.
-+
- config EXTRA_TARGETS
- 	string "Additional default image types"
- 	help
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -1058,6 +1058,17 @@ int __init early_init_dt_scan_chosen(uns
- 	if (p != NULL && l > 0)
- 		strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));
- 
-+    /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
-+     * device tree option of chosen/bootargs-override. This is
-+     * helpful on boards where u-boot sets bootargs, and is unable
-+     * to be modified.
-+     */
-+#ifdef CONFIG_CMDLINE_OVERRIDE
-+	p = of_get_flat_dt_prop(node, "bootargs-override", &l);
-+	if (p != NULL && l > 0)
-+		strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-+#endif
-+
- 	/*
- 	 * CONFIG_CMDLINE is meant to be a default in case nothing else
- 	 * managed to set the command line, unless CONFIG_CMDLINE_FORCE
diff --git a/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w-rev1.patch b/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w-rev1.patch
deleted file mode 100644
index 3c64b068470f..000000000000
--- a/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w-rev1.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -173,6 +173,16 @@ config XES_MPC85xx
- 	  Manufacturer: Extreme Engineering Solutions, Inc.
- 	  URL: <https://www.xes-inc.com/>
- 
-+config RED_15W_REV1
-+	bool "Sophos RED 15w Rev.1"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the Sophos RED 15w Rev.1 board.
-+
-+	  This board is a wireless VPN router with a Freescale P1010 SoC.
-+
- config STX_GP3
- 	bool "Silicon Turnkey Express GP3"
- 	help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
-+obj-$(CONFIG_RED_15W_REV1)	+= red15w_rev1.o
- obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
- obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
- obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
diff --git a/target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch b/target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
deleted file mode 100644
index 94ed26c3df0f..000000000000
--- a/target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
+++ /dev/null
@@ -1,170 +0,0 @@
-From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 30 Dec 2018 23:24:41 +0100
-Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
-
-This patch apply chages for OpenWRT in P2020RDB
-dts file.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
- 1 file changed, 63 insertions(+), 35 deletions(-)
-
---- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-@@ -5,10 +5,15 @@
-  * Copyright 2009-2012 Freescale Semiconductor Inc.
-  */
- 
-+/dts-v1/;
-+
- /include/ "p2020si-pre.dtsi"
- 
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
- / {
--	model = "fsl,P2020RDB";
-+	model = "Freescale P2020RDB";
- 	compatible = "fsl,P2020RDB";
- 
- 	aliases {
-@@ -34,48 +39,38 @@
- 			  0x2 0x0 0x0 0xffb00000 0x00020000>;
- 
- 		nor@0,0 {
--			#address-cells = <1>;
--			#size-cells = <1>;
- 			compatible = "cfi-flash";
- 			reg = <0x0 0x0 0x1000000>;
- 			bank-width = <2>;
- 			device-width = <1>;
- 
--			partition@0 {
--				/* This location must not be altered  */
--				/* 256KB for Vitesse 7385 Switch firmware */
--				reg = <0x0 0x00040000>;
--				label = "NOR (RO) Vitesse-7385 Firmware";
--				read-only;
--			};
--
--			partition@40000 {
--				/* 256KB for DTB Image */
--				reg = <0x00040000 0x00040000>;
--				label = "NOR (RO) DTB Image";
--				read-only;
--			};
-+			partitions {
-+				compatible = "fixed-partitions";
-+				#address-cells = <1>;
-+				#size-cells = <1>;
- 
--			partition@80000 {
--				/* 3.5 MB for Linux Kernel Image */
--				reg = <0x00080000 0x00380000>;
--				label = "NOR (RO) Linux Kernel Image";
--				read-only;
--			};
-+				partition@0 {
-+					/* This location must not be altered  */
-+					/* 256KB for Vitesse 7385 Switch firmware */
-+					reg = <0x0 0x00040000>;
-+					label = "NOR (RO) Vitesse-7385 Firmware";
-+					read-only;
-+				};
- 
--			partition@400000 {
--				/* 11MB for JFFS2 based Root file System */
--				reg = <0x00400000 0x00b00000>;
--				label = "NOR (RW) JFFS2 Root File System";
--			};
-+				partition@40000 {
-+					compatible = "denx,fit";
-+					reg = <0x00040000 0x00ec0000>;
-+					label = "firmware";
-+				};
- 
--			partition@f00000 {
--				/* This location must not be altered  */
--				/* 512KB for u-boot Bootloader Image */
--				/* 512KB for u-boot Environment Variables */
--				reg = <0x00f00000 0x00100000>;
--				label = "NOR (RO) U-Boot Image";
--				read-only;
-+				partition@f00000 {
-+					/* This location must not be altered  */
-+					/* 512KB for u-boot Bootloader Image */
-+					/* 512KB for u-boot Environment Variables */
-+					reg = <0x00f00000 0x00100000>;
-+					label = "u-boot";
-+					read-only;
-+				};
- 			};
- 		};
- 
-@@ -85,6 +80,7 @@
- 			compatible = "fsl,p2020-fcm-nand",
- 				     "fsl,elbc-fcm-nand";
- 			reg = <0x1 0x0 0x40000>;
-+			nand-ecc-mode = "none";
- 
- 			partition@0 {
- 				/* This location must not be altered  */
-@@ -140,13 +136,43 @@
- 	soc: soc@ffe00000 {
- 		ranges = <0x0 0x0 0xffe00000 0x100000>;
- 
-+		gpio0: gpio-controller@fc00 {
-+		};
-+
- 		i2c@3000 {
-+			temperature-sensor@4c {
-+				compatible = "adi,adt7461";
-+				reg = <0x4c>;
-+			};
-+
-+			eeprom@50 {
-+				compatible = "atmel,24c256";
-+				reg = <0x50>;
-+			};
-+
- 			rtc@68 {
- 				compatible = "dallas,ds1339";
- 				reg = <0x68>;
- 			};
- 		};
- 
-+		i2c@3100 {
-+			pmic@11 {
-+				compatible = "zl2006";
-+				reg = <0x11>;
-+			};
-+
-+			gpio@18 {
-+				compatible = "nxp,pca9557";
-+				reg = <0x18>;
-+			};
-+
-+			eeprom@52 {
-+				compatible = "atmel,24c01";
-+				reg = <0x52>;
-+			};
-+		};
-+
- 		spi@7000 {
- 			flash@0 {
- 				#address-cells = <1>;
-@@ -200,10 +226,12 @@
- 			phy0: ethernet-phy@0 {
- 				interrupts = <3 1 0 0>;
- 				reg = <0x0>;
-+				reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- 			};
- 			phy1: ethernet-phy@1 {
- 				interrupts = <3 1 0 0>;
- 				reg = <0x1>;
-+				reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- 			};
- 			tbi-phy@2 {
- 				device_type = "tbi-phy";
diff --git a/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda-support.patch b/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda-support.patch
deleted file mode 100644
index 4913c614a803..000000000000
--- a/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -60,6 +60,17 @@ config HIVEAP_330
-       This board is a Concurrent Dual-Band wireless access point with a
-       Freescale P1020 SoC.
- 
-+config PANDA
-+	bool "OCEDO PANDA"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the OCEDO PANDA board.
-+
-+	  This board is a Concurrent Dual-Band wireless access point with a
-+	  Freescale P1020 SoC.
-+
- config MPC8540_ADS
- 	bool "Freescale MPC8540 ADS"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
- obj-$(CONFIG_P1022_DS)    += p1022_ds.o
- obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
- obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
-+obj-$(CONFIG_PANDA)       += panda.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
diff --git a/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i-support.patch b/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i-support.patch
deleted file mode 100644
index 124376ffd997..000000000000
--- a/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -71,6 +71,17 @@ config PANDA
- 	  This board is a Concurrent Dual-Band wireless access point with a
- 	  Freescale P1020 SoC.
- 
-+config WS_AP3710I
-+	bool "Enterasys WS-AP3710i"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the Enterasys WS-AP3710i board.
-+
-+	  This board is a Concurrent Dual-Band wireless access point with a
-+	  Freescale P1020 SoC.
-+
- config MPC8540_ADS
- 	bool "Freescale MPC8540 ADS"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
- obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
- obj-$(CONFIG_PANDA)       += panda.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
-+obj-$(CONFIG_WS_AP3710I)  += ws-ap3710i.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
- obj-$(CONFIG_RED_15W_REV1)	+= red15w_rev1.o
diff --git a/target/linux/mpc85xx/patches-5.10/107-powerpc-85xx-add-ws-ap3825i-support.patch b/target/linux/mpc85xx/patches-5.10/107-powerpc-85xx-add-ws-ap3825i-support.patch
deleted file mode 100644
index 89c58078de21..000000000000
--- a/target/linux/mpc85xx/patches-5.10/107-powerpc-85xx-add-ws-ap3825i-support.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 2fa1a7983ef30f3c7486f9b07c001bee87d1f6d6 Mon Sep 17 00:00:00 2001
-From: Martin Kennedy <hurricos@gmail.com>
-Date: Sat, 1 Jan 2022 11:01:37 -0500
-Subject: [PATCH] PowerPC 85xx: Add WS-AP3825i support
-
-This patch adds support for building Linux for the Extreme Networks
-WS-AP3825i AP.
-
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -82,6 +82,16 @@ config WS_AP3710I
- 	  This board is a Concurrent Dual-Band wireless access point with a
- 	  Freescale P1020 SoC.
- 
-+config WS_AP3825I
-+	bool "Extreme Networks WS-AP3825i"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the Extreme Networks WS-AP3825i board.
-+	  This board is a Concurrent Dual-Band wireless access point with a
-+	  Freescale P1020 SoC.
-+
- config MPC8540_ADS
- 	bool "Freescale MPC8540 ADS"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
- obj-$(CONFIG_PANDA)       += panda.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_WS_AP3710I)  += ws-ap3710i.o
-+obj-$(CONFIG_WS_AP3825I)  += ws-ap3825i.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
- obj-$(CONFIG_RED_15W_REV1)	+= red15w_rev1.o
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -159,6 +159,7 @@ src-plat-$(CONFIG_PPC_POWERNV) += pserie
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
- src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
-+src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S
- 
- src-wlib := $(sort $(src-wlib-y))
- src-plat := $(sort $(src-plat-y))
-@@ -339,6 +340,7 @@ image-$(CONFIG_TQM8560)			+= cuImage.tqm
- image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
- image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
- image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
-+image-$(CONFIG_WS_AP3825I)		+= simpleImage.ws-ap3825i
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
- 
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -324,6 +324,7 @@ adder875-redboot)
-     platformo="$object/fixed-head.o $object/redboot-8xx.o"
-     binary=y
-     ;;
-+simpleboot-ws-ap3825i|\
- simpleboot-tl-wdr4900-v1)
-     platformo="$object/fixed-head.o $object/simpleboot.o"
-     link_address='0x1000000'
diff --git a/target/linux/mpc85xx/patches-5.10/108-powerpc-85xx-firebox-t10-support.patch.patch b/target/linux/mpc85xx/patches-5.10/108-powerpc-85xx-firebox-t10-support.patch.patch
deleted file mode 100644
index b074113eaa5a..000000000000
--- a/target/linux/mpc85xx/patches-5.10/108-powerpc-85xx-firebox-t10-support.patch.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -92,6 +92,16 @@ config WS_AP3825I
- 	  This board is a Concurrent Dual-Band wireless access point with a
- 	  Freescale P1020 SoC.
- 
-+config FIREBOX_T10
-+	bool "Watchguard Firebox T10"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the Watchguard Firebox T10 board.
-+	  This board is a VPN Gateway-Router with a
-+	  Freescale P1010 SoC.
-+
- config MPC8540_ADS
- 	bool "Freescale MPC8540 ADS"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_PANDA)       += panda.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_WS_AP3710I)  += ws-ap3710i.o
- obj-$(CONFIG_WS_AP3825I)  += ws-ap3825i.o
-+obj-$(CONFIG_FIREBOX_T10) += firebox_t10.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
- obj-$(CONFIG_RED_15W_REV1)	+= red15w_rev1.o
diff --git a/target/linux/mpc85xx/patches-5.10/109-powerpc-85xx-add-ws-ap3715i-support.patch b/target/linux/mpc85xx/patches-5.10/109-powerpc-85xx-add-ws-ap3715i-support.patch
deleted file mode 100644
index 10ba74489711..000000000000
--- a/target/linux/mpc85xx/patches-5.10/109-powerpc-85xx-add-ws-ap3715i-support.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -82,6 +82,17 @@ config WS_AP3710I
- 	  This board is a Concurrent Dual-Band wireless access point with a
- 	  Freescale P1020 SoC.
- 
-+config WS_AP3715I
-+	bool "Enterasys WS-AP3715i"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the Enterasys WS-AP3715i board.
-+
-+	  This board is a Concurrent Dual-Band wireless access point with a
-+	  Freescale P1010 SoC.
-+
- config WS_AP3825I
- 	bool "Extreme Networks WS-AP3825i"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
- obj-$(CONFIG_PANDA)       += panda.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_WS_AP3710I)  += ws-ap3710i.o
-+obj-$(CONFIG_WS_AP3715I)  += ws-ap3715i.o
- obj-$(CONFIG_WS_AP3825I)  += ws-ap3825i.o
- obj-$(CONFIG_FIREBOX_T10) += firebox_t10.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -340,6 +340,7 @@ image-$(CONFIG_TQM8560)			+= cuImage.tqm
- image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
- image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
- image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
-+image-$(CONFIG_WS_AP3715I)		+= simpleImage.ws-ap3715i
- image-$(CONFIG_WS_AP3825I)		+= simpleImage.ws-ap3825i
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -324,6 +324,7 @@ adder875-redboot)
-     platformo="$object/fixed-head.o $object/redboot-8xx.o"
-     binary=y
-     ;;
-+simpleboot-ws-ap3715i|\
- simpleboot-ws-ap3825i|\
- simpleboot-tl-wdr4900-v1)
-     platformo="$object/fixed-head.o $object/simpleboot.o"
diff --git a/target/linux/mpc85xx/patches-5.10/900-powerpc-bootwrapper-disable-uImage-generation.patch b/target/linux/mpc85xx/patches-5.10/900-powerpc-bootwrapper-disable-uImage-generation.patch
deleted file mode 100644
index 86a1ea902e43..000000000000
--- a/target/linux/mpc85xx/patches-5.10/900-powerpc-bootwrapper-disable-uImage-generation.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From d43ab14605510d9d2bd257a8cd70f24ada4621b0 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sat, 29 Feb 2020 14:27:04 +0100
-Subject: [PATCH] powerpc: bootwrapper: disable uImage generation
-
-Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to
-instruct the mkimage to use the xz compression, which isn't
-supported. This disables the uImage generation, as OpenWrt
-generates individual uImages for each board using it's own
-toolchain.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/powerpc/boot/Makefile | 9 ---------
- 1 file changed, 9 deletions(-)
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -266,7 +266,6 @@ image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
- image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
- image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
- image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
--image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
- image-$(CONFIG_EPAPR_BOOT)		+= zImage.epapr
- 
- #
-@@ -399,15 +398,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
- $(obj)/vmlinux.strip: vmlinux
- 	$(STRIP) -s -R .comment $< -o $@
- 
--$(obj)/uImage: vmlinux $(wrapperbits) FORCE
--	$(call if_changed,wrap,uboot)
--
--$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
--	$(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
--
--$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
--	$(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
--
- $(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
- 	$(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
- 
diff --git a/target/linux/mvebu/config-5.10 b/target/linux/mvebu/config-5.10
deleted file mode 100644
index 6ad5635c173c..000000000000
--- a/target/linux/mvebu/config-5.10
+++ /dev/null
@@ -1,424 +0,0 @@
-CONFIG_AHCI_MVEBU=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARMADA_370_CLK=y
-CONFIG_ARMADA_370_XP_IRQ=y
-CONFIG_ARMADA_370_XP_TIMER=y
-# CONFIG_ARMADA_37XX_WATCHDOG is not set
-CONFIG_ARMADA_38X_CLK=y
-CONFIG_ARMADA_THERMAL=y
-CONFIG_ARMADA_XP_CLK=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
-# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_MVEBU_V7_CPUIDLE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_LEDS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_FEROCEON_L2 is not set
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PJ4B=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_MARVELL=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_ESSIV=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=y
-CONFIG_CRYPTO_SHA256_ARM=y
-CONFIG_CRYPTO_SHA512_ARM=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0=y
-# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-CONFIG_DEBUG_UART_8250_SHIFT=2
-CONFIG_DEBUG_UART_PHYS=0xd0012000
-CONFIG_DEBUG_UART_VIRT=0xfec12000
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWBM=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_PXA is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_JBD2=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PCA963X=y
-CONFIG_LEDS_TLC591XX=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_ARMADA_370=y
-# CONFIG_MACH_ARMADA_375 is not set
-CONFIG_MACH_ARMADA_38X=y
-# CONFIG_MACH_ARMADA_39X is not set
-CONFIG_MACH_ARMADA_XP=y
-# CONFIG_MACH_DOVE is not set
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MACH_MVEBU_V7=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_I2C=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_PXAV3=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_MARVELL=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_CLK_COREDIV=y
-CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-CONFIG_MVNETA=y
-CONFIG_MVNETA_BM=y
-CONFIG_MVNETA_BM_ENABLE=y
-# CONFIG_MVPP2 is not set
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_NVME_CORE=y
-# CONFIG_NVME_HWMON is not set
-# CONFIG_NVME_MULTIPATH is not set
-# CONFIG_NVME_TCP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PCI=y
-CONFIG_PCI_BRIDGE_EMUL=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_MVEBU_A3700_COMPHY is not set
-# CONFIG_PHY_MVEBU_A3700_UTMI is not set
-# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
-# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_38X=y
-CONFIG_PINCTRL_ARMADA_XP=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PJ4B_ERRATA_4742=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PLAT_ORION=y
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=11
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_ARMADA38X=y
-# CONFIG_RTC_DRV_MV is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_HOST=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-CONFIG_SENSORS_PWM_FAN=y
-CONFIG_SENSORS_TMP421=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_MVEBU_CONSOLE=y
-CONFIG_SERIAL_MVEBU_UART=y
-CONFIG_SFP=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_ARMADA_3700 is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_ORION=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_ORION=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_LEDS_TRIGGER_USBPORT=y
-CONFIG_USB_PHY=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MVEBU=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/mvebu/cortexa53/config-5.10 b/target/linux/mvebu/cortexa53/config-5.10
deleted file mode 100644
index fd585784059c..000000000000
--- a/target/linux/mvebu/cortexa53/config-5.10
+++ /dev/null
@@ -1,102 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_37XX_RWTM_MBOX=y
-CONFIG_ARMADA_37XX_WATCHDOG=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_AP_CP_HELPER=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA256_ARM64=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_SHA512_ARM64=y
-CONFIG_CRYPTO_SHA512_ARM64_CE=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DMA_DIRECT_REMAP=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MDIO_DEVRES=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_MVEBU_SEI=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_A3700_COMPHY=y
-CONFIG_PHY_MVEBU_A3700_UTMI=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPI_ARMADA_3700=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TURRIS_MOX_RWTM=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_XXHASH=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/mvebu/cortexa72/config-5.10 b/target/linux/mvebu/cortexa72/config-5.10
deleted file mode 100644
index 584c3fc9b857..000000000000
--- a/target/linux/mvebu/cortexa72/config-5.10
+++ /dev/null
@@ -1,115 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_AQUANTIA_PHY=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-# CONFIG_ARM64_PTR_AUTH is not set
-CONFIG_ARM64_SVE=y
-# CONFIG_ARM64_TAGGED_ADDR_ABI is not set
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_AP_CPU_CLK=y
-CONFIG_ARMADA_AP_CP_HELPER=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARMADA_8K_CPUFREQ=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA256_ARM64=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_SHA512_ARM64=y
-CONFIG_CRYPTO_SHA512_ARM64_CE=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DMA_DIRECT_REMAP=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_LEDS_IEI_WT61P803_PUZZLE=y
-CONFIG_LEDS_IS31FL319X=y
-CONFIG_MARVELL_10G_PHY=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_IEI_WT61P803_PUZZLE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_MVEBU_SEI=y
-CONFIG_MVPP2=y
-CONFIG_MV_XOR_V2=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-# CONFIG_PCI_AARDVARK is not set
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_CP110_COMPHY=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_REGULATOR_GPIO=y
-# CONFIG_RODATA_FULL_DEFAULT_ENABLED is not set
-CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON=y
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_XXHASH=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/mvebu/cortexa9/config-5.10 b/target/linux/mvebu/cortexa9/config-5.10
deleted file mode 100644
index aff95995ce88..000000000000
--- a/target/linux/mvebu/cortexa9/config-5.10
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_PHY_MVEBU_A38X_COMPHY=y
-CONFIG_RTC_DRV_MV=y
diff --git a/target/linux/mvebu/patches-5.10/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch b/target/linux/mvebu/patches-5.10/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
deleted file mode 100644
index c3abae60a603..000000000000
--- a/target/linux/mvebu/patches-5.10/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Tue, 10 Nov 2020 16:38:31 +0100
-Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED
-
-With board revision 1.3, SolidRun moved the power LED to the middle of
-the board. In old place of power LED a GPIO controllable heartbeat LED
-was added. This commit only touches Single Shot variant, since only this
-variant is all revision 1.3.
-
-Note:
-This is slightly modified patch. Some boards could be placed in an
-enclosure, so the LED18 is enabled by default, since that'll be the only
-visible indicator that the board is operating.
-
-Reported-by: Alexandra Alth <alexandra@alth.de>
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- .../marvell/armada-8040-mcbin-singleshot.dts  | 22 +++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-@@ -5,6 +5,8 @@
-  * Device Tree file for MACCHIATOBin Armada 8040 community board platform
-  */
- 
-+#include <dt-bindings/leds/common.h>
-+
- #include "armada-8040-mcbin.dtsi"
- 
- / {
-@@ -12,6 +14,20 @@
- 	compatible = "marvell,armada8040-mcbin-singleshot",
- 			"marvell,armada8040-mcbin", "marvell,armada8040",
- 			"marvell,armada-ap806-quad", "marvell,armada-ap806";
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = <&cp0_led18_pins>;
-+		pinctrl-names = "default";
-+
-+		led18 {
-+			gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
-+			function = LED_FUNCTION_HEARTBEAT;
-+			color = <LED_COLOR_ID_GREEN>;
-+			linux,default-trigger = "heartbeat";
-+			default-state = "on";
-+		};
-+	};
- };
- 
- &cp0_eth0 {
-@@ -27,3 +43,10 @@
- 	managed = "in-band-status";
- 	sfp = <&sfp_eth1>;
- };
-+
-+&cp0_pinctrl {
-+	cp0_led18_pins: led18-pins {
-+		marvell,pins = "mpp33";
-+		marvell,function = "gpio";
-+	};
-+};
diff --git a/target/linux/mvebu/patches-5.10/002-v5.11-ARM-dts-turris-omnia-enable-HW-buffer-management.patch b/target/linux/mvebu/patches-5.10/002-v5.11-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
deleted file mode 100644
index 4ff0fe1e4cf0..000000000000
--- a/target/linux/mvebu/patches-5.10/002-v5.11-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 018b88eee1a2efda26ed2f09aab33ccdc40ef18f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Sun, 15 Nov 2020 14:59:17 +0100
-Subject: ARM: dts: turris-omnia: enable HW buffer management
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The buffer manager is available on Turris Omnia but needs to be
-described in device-tree to be used.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: Andreas Färber <afaerber@suse.de>
-Cc: Andrew Lunn <andrew@lunn.ch>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
-(limited to 'arch/arm/boot/dts/armada-385-turris-omnia.dts')
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -90,12 +90,23 @@
- 	};
- };
- 
-+&bm {
-+	status = "okay";
-+};
-+
-+&bm_bppi {
-+	status = "okay";
-+};
-+
- /* Connected to 88E6176 switch, port 6 */
- &eth0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&ge0_rgmii_pins>;
- 	status = "okay";
- 	phy-mode = "rgmii";
-+	buffer-manager = <&bm>;
-+	bm,pool-long = <0>;
-+	bm,pool-short = <3>;
- 
- 	fixed-link {
- 		speed = <1000>;
-@@ -109,6 +120,9 @@
- 	pinctrl-0 = <&ge1_rgmii_pins>;
- 	status = "okay";
- 	phy-mode = "rgmii";
-+	buffer-manager = <&bm>;
-+	bm,pool-long = <1>;
-+	bm,pool-short = <3>;
- 
- 	fixed-link {
- 		speed = <1000>;
-@@ -121,6 +135,9 @@
- 	status = "okay";
- 	phy-mode = "sgmii";
- 	phy = <&phy1>;
-+	buffer-manager = <&bm>;
-+	bm,pool-long = <2>;
-+	bm,pool-short = <3>;
- };
- 
- &i2c0 {
diff --git a/target/linux/mvebu/patches-5.10/003-v5.11-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch b/target/linux/mvebu/patches-5.10/003-v5.11-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch
deleted file mode 100644
index 3c7ec2411be1..000000000000
--- a/target/linux/mvebu/patches-5.10/003-v5.11-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 9ec25ef84832209a8326f9a71fe3ba14f4bcf301 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Sun, 15 Nov 2020 14:59:18 +0100
-Subject: ARM: dts: turris-omnia: add comphy handle to eth2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The eth2 controller on Turris Omnia is connected to SerDes. For SFP to
-be able to switch between 1G and 2.5G modes the comphy link has to be
-defined.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Fixes: f3a6a9f3704a ("ARM: dts: add description for Armada 38x ...")
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Andreas Färber <afaerber@suse.de>
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -135,6 +135,7 @@
- 	status = "okay";
- 	phy-mode = "sgmii";
- 	phy = <&phy1>;
-+	phys = <&comphy5 2>;
- 	buffer-manager = <&bm>;
- 	bm,pool-long = <2>;
- 	bm,pool-short = <3>;
diff --git a/target/linux/mvebu/patches-5.10/004-v5.11-ARM-dts-turris-omnia-describe-switch-interrupt.patch b/target/linux/mvebu/patches-5.10/004-v5.11-ARM-dts-turris-omnia-describe-switch-interrupt.patch
deleted file mode 100644
index e4ecbef19363..000000000000
--- a/target/linux/mvebu/patches-5.10/004-v5.11-ARM-dts-turris-omnia-describe-switch-interrupt.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From d29b67c220caf5f4905e1f1576e71bcb6de4af9e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Sun, 15 Nov 2020 14:59:19 +0100
-Subject: ARM: dts: turris-omnia: describe switch interrupt
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Describe switch interrupt for Turris Omnia so that the CPU does not have
-to poll the switch. We also need to to set mpp45 pin to gpio function
-for this.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: Andreas Färber <afaerber@suse.de>
-Cc: Andrew Lunn <andrew@lunn.ch>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 12 +++++++++++-
- 1 file changed, 11 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -267,13 +267,18 @@
- 
- 	/* Switch MV88E6176 at address 0x10 */
- 	switch@10 {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&swint_pins>;
- 		compatible = "marvell,mv88e6085";
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--		dsa,member = <0 0>;
- 
-+		dsa,member = <0 0>;
- 		reg = <0x10>;
- 
-+		interrupt-parent = <&gpio1>;
-+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
-+
- 		ports {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
-@@ -336,6 +341,11 @@
- 		marvell,function = "gpio";
- 	};
- 
-+	swint_pins: swint-pins {
-+		marvell,pins = "mpp45";
-+		marvell,function = "gpio";
-+	};
-+
- 	spi0cs0_pins: spi0cs0-pins {
- 		marvell,pins = "mpp25";
- 		marvell,function = "spi0";
diff --git a/target/linux/mvebu/patches-5.10/005-v5.11-ARM-dts-turris-omnia-add-SFP-node.patch b/target/linux/mvebu/patches-5.10/005-v5.11-ARM-dts-turris-omnia-add-SFP-node.patch
deleted file mode 100644
index db8d26d038a5..000000000000
--- a/target/linux/mvebu/patches-5.10/005-v5.11-ARM-dts-turris-omnia-add-SFP-node.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From add2d65962977caf23ca2fa21a2457d31b636574 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 16 Nov 2020 13:24:22 +0100
-Subject: ARM: dts: turris-omnia: add SFP node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Turris Omnia has an SFP cage that, together with WAN PHY, is connected
-to eth2 SerDes via a SerDes multiplexor. When a SFP module is present,
-the multiplexor switches the SerDes signal from PHY to SFP.
-
-Describe the SFP cage, but leave it disabled. Until phylink has support
-for such configuration, we are leaving it to U-Boot to enable SFP and
-disable WAN PHY at boot time depending on whether a SFP module is
-present.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: Andreas Färber <afaerber@suse.de>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 30 ++++++++++++++++++++++++++-
- 1 file changed, 29 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -88,6 +88,24 @@
- 			};
- 		};
- 	};
-+
-+	sfp: sfp {
-+		compatible = "sff,sfp";
-+		i2c-bus = <&sfp_i2c>;
-+		tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
-+		tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
-+		rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
-+		los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
-+		mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
-+		maximum-power-milliwatt = <3000>;
-+
-+		/*
-+		 * For now this has to be enabled at boot time by U-Boot when
-+		 * a SFP module is present. Read more in the comment in the
-+		 * eth2 node below.
-+		 */
-+		status = "disabled";
-+	};
- };
- 
- &bm {
-@@ -132,10 +150,20 @@
- 
- /* WAN port */
- &eth2 {
-+	/*
-+	 * eth2 is connected via a multiplexor to both the SFP cage and to
-+	 * ethernet-phy@1. The multiplexor switches the signal to SFP cage when
-+	 * a SFP module is present, as determined by the mode-def0 GPIO.
-+	 *
-+	 * Until kernel supports this configuration properly, in case SFP module
-+	 * is present, U-Boot has to enable the sfp node above, remove phy
-+	 * handle and add managed = "in-band-status" property.
-+	 */
- 	status = "okay";
- 	phy-mode = "sgmii";
- 	phy = <&phy1>;
- 	phys = <&comphy5 2>;
-+	sfp = <&sfp>;
- 	buffer-manager = <&bm>;
- 	bm,pool-long = <2>;
- 	bm,pool-short = <3>;
-@@ -201,7 +229,7 @@
- 			/* routed to PCIe2 connector (CN62A) */
- 		};
- 
--		i2c@4 {
-+		sfp_i2c: i2c@4 {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <4>;
diff --git a/target/linux/mvebu/patches-5.10/006-v5.11-ARM-dts-turris-omnia-add-LED-controller-node.patch b/target/linux/mvebu/patches-5.10/006-v5.11-ARM-dts-turris-omnia-add-LED-controller-node.patch
deleted file mode 100644
index 2f9ae496694d..000000000000
--- a/target/linux/mvebu/patches-5.10/006-v5.11-ARM-dts-turris-omnia-add-LED-controller-node.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From 91dd42d0e30fdbb250c61d1192af569f07e6ada4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Sun, 15 Nov 2020 14:59:21 +0100
-Subject: ARM: dts: turris-omnia: add LED controller node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Linux now has incomplete support for the LED controller on Turris Omnia:
-it can set brightness and colors for each LED.
-
-The controller can also put these LEDs into HW controlled mode, in which
-the LEDs are controlled by HW: for example the WAN LED is connected via
-MCU to the WAN PHY LED pin.
-
-The driver does not support these HW controlled modes yet, and on probe
-puts the LEDs into SW controlled mode.
-
-Add node describing the LED controller, but disable it for now.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: Andreas Färber <afaerber@suse.de>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 111 +++++++++++++++++++++++++-
- 1 file changed, 110 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -12,6 +12,7 @@
- 
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
- #include "armada-385.dtsi"
- 
- / {
-@@ -187,7 +188,115 @@
- 			reg = <0>;
- 
- 			/* STM32F0 command interface at address 0x2a */
--			/* leds device (in STM32F0) at address 0x2b */
-+
-+			led-controller@2b {
-+				compatible = "cznic,turris-omnia-leds";
-+				reg = <0x2b>;
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				/*
-+				 * LEDs are controlled by MCU (STM32F0) at
-+				 * address 0x2b.
-+				 *
-+				 * The driver does not support HW control mode
-+				 * for the LEDs yet. Disable the LEDs for now.
-+				 *
-+				 * Also LED functions are not stable yet:
-+				 * - there are 3 LEDs connected via MCU to PCIe
-+				 *   ports. One of these ports supports mSATA.
-+				 *   There is no mSATA nor PCIe function.
-+				 *   For now we use LED_FUNCTION_WLAN, since
-+				 *   in most cases users have wifi cards in
-+				 *   these slots
-+				 * - there are 2 LEDs dedicated for user: A and
-+				 *   B. Again there is no such function defined.
-+				 *   For now we use LED_FUNCTION_INDICATOR
-+				 */
-+				status = "disabled";
-+
-+				multi-led@0 {
-+					reg = <0x0>;
-+					color = <LED_COLOR_ID_RGB>;
-+					function = LED_FUNCTION_INDICATOR;
-+					function-enumerator = <2>;
-+				};
-+
-+				multi-led@1 {
-+					reg = <0x1>;
-+					color = <LED_COLOR_ID_RGB>;
-+					function = LED_FUNCTION_INDICATOR;
-+					function-enumerator = <1>;
-+				};
-+
-+				multi-led@2 {
-+					reg = <0x2>;
-+					color = <LED_COLOR_ID_RGB>;
-+					function = LED_FUNCTION_WLAN;
-+					function-enumerator = <3>;
-+				};
-+
-+				multi-led@3 {
-+					reg = <0x3>;
-+					color = <LED_COLOR_ID_RGB>;
-+					function = LED_FUNCTION_WLAN;
-+					function-enumerator = <2>;
-+				};
-+
-+				multi-led@4 {
-+					reg = <0x4>;
-+					color = <LED_COLOR_ID_RGB>;
-+					function = LED_FUNCTION_WLAN;
-+					function-enumerator = <1>;
-+				};
-+
-+				multi-led@5 {
-+					reg = <0x5>;
-+					color = <LED_COLOR_ID_RGB>;
-+					function = LED_FUNCTION_WAN;
-+				};
-+
-+				multi-led@6 {
-+					reg = <0x6>;
-+					color = <LED_COLOR_ID_RGB>;
-+					function = LED_FUNCTION_LAN;
-+					function-enumerator = <4>;
-+				};
-+
-+				multi-led@7 {
-+					reg = <0x7>;
-+					color = <LED_COLOR_ID_RGB>;
-+					function = LED_FUNCTION_LAN;
-+					function-enumerator = <3>;
-+				};
-+
-+				multi-led@8 {
-+					reg = <0x8>;
-+					color = <LED_COLOR_ID_RGB>;
-+					function = LED_FUNCTION_LAN;
-+					function-enumerator = <2>;
-+				};
-+
-+				multi-led@9 {
-+					reg = <0x9>;
-+					color = <LED_COLOR_ID_RGB>;
-+					function = LED_FUNCTION_LAN;
-+					function-enumerator = <1>;
-+				};
-+
-+				multi-led@a {
-+					reg = <0xa>;
-+					color = <LED_COLOR_ID_RGB>;
-+					function = LED_FUNCTION_LAN;
-+					function-enumerator = <0>;
-+				};
-+
-+				multi-led@b {
-+					reg = <0xb>;
-+					color = <LED_COLOR_ID_RGB>;
-+					function = LED_FUNCTION_POWER;
-+				};
-+			};
- 
- 			eeprom@54 {
- 				compatible = "atmel,24c64";
diff --git a/target/linux/mvebu/patches-5.10/007-v5.11-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch b/target/linux/mvebu/patches-5.10/007-v5.11-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch
deleted file mode 100644
index b20595f041de..000000000000
--- a/target/linux/mvebu/patches-5.10/007-v5.11-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 8ee4a5f4f40da60bb85e13d9dd218a3c9197e3e3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Sun, 15 Nov 2020 14:59:22 +0100
-Subject: ARM: dts: turris-omnia: update ethernet-phy node and handle name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use property name `phy-handle` instead of the deprecated `phy` to
-connect eth2 to the PHY.
-Rename the node from "phy@1" to "ethernet-phy@1", since "phy@1" is
-incorrect according to device-tree bindings documentation.
-Also remove the "ethernet-phy-id0141.0DD1" compatible string, it is not
-needed. Kernel can read the PHY identifier itself.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: Andreas Färber <afaerber@suse.de>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -162,7 +162,7 @@
- 	 */
- 	status = "okay";
- 	phy-mode = "sgmii";
--	phy = <&phy1>;
-+	phy-handle = <&phy1>;
- 	phys = <&comphy5 2>;
- 	sfp = <&sfp>;
- 	buffer-manager = <&bm>;
-@@ -393,9 +393,9 @@
- 	pinctrl-0 = <&mdio_pins>;
- 	status = "okay";
- 
--	phy1: phy@1 {
-+	phy1: ethernet-phy@1 {
- 		status = "okay";
--		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
-+		compatible = "ethernet-phy-ieee802.3-c22";
- 		reg = <1>;
- 		marvell,reg-init = <3 18 0 0x4985>;
- 
diff --git a/target/linux/mvebu/patches-5.10/008-v5.12-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch b/target/linux/mvebu/patches-5.10/008-v5.12-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
deleted file mode 100644
index 9c49430d6f4d..000000000000
--- a/target/linux/mvebu/patches-5.10/008-v5.12-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 5b2c7e0ae762fff2b172caf16b2766cc3e1ad859 Mon Sep 17 00:00:00 2001
-From: Rui Salvaterra <rsalvaterra@gmail.com>
-Date: Wed, 17 Feb 2021 15:30:38 +0000
-Subject: ARM: dts: turris-omnia: fix hardware buffer management
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Hardware buffer management has never worked on the Turris Omnia, as the
-required MBus window hadn't been reserved. Fix thusly.
-
-Fixes: 018b88eee1a2 ("ARM: dts: turris-omnia: enable HW buffer management")
-
-Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
-Reviewed-by: Marek Behún <kabel@kernel.org>
-Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -38,7 +38,8 @@
- 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
- 			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
--			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
-+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
- 
- 		internal-regs {
- 
diff --git a/target/linux/mvebu/patches-5.10/100-mvebu-dt-ARM-dts-turris-omnia-configure-LED-0-pin-function-to.patch b/target/linux/mvebu/patches-5.10/100-mvebu-dt-ARM-dts-turris-omnia-configure-LED-0-pin-function-to.patch
deleted file mode 100644
index b71dd7260969..000000000000
--- a/target/linux/mvebu/patches-5.10/100-mvebu-dt-ARM-dts-turris-omnia-configure-LED-0-pin-function-to.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 81c0004a6433ff90fa6129418802c3c367e453c2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 4 Jul 2022 13:36:21 +0200
-Subject: [PATCH] ARM: dts: turris-omnia: configure LED[0] pin function to
- link/activity
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The marvell PHY driver changes the LED[0] pin function to "On - 1000
-Mbps Link, Off - Else".
-
-Turris Omnia expects that the function is "On - Link, Blink - Activity,
-Off - No link".
-
-Use the `marvell,reg-init` DT property to change the function.
-
-In the future, once netdev trigger will support HW offloading, we will
-be able to have this configured via the combination of PHY driver and
-leds-turris-omnia driver.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -398,7 +398,8 @@
- 		status = "okay";
- 		compatible = "ethernet-phy-ieee802.3-c22";
- 		reg = <1>;
--		marvell,reg-init = <3 18 0 0x4985>;
-+		marvell,reg-init = <3 18 0 0x4985>,
-+				   <3 16 0xfff0 0x0001>;
- 
- 		/* irq is connected to &pcawan pin 7 */
- 	};
diff --git a/target/linux/mvebu/patches-5.10/101-mvebu-dt-ARM-dts-turris-omnia-enable-LED-controller-node.patch b/target/linux/mvebu/patches-5.10/101-mvebu-dt-ARM-dts-turris-omnia-enable-LED-controller-node.patch
deleted file mode 100644
index 8125f7a44257..000000000000
--- a/target/linux/mvebu/patches-5.10/101-mvebu-dt-ARM-dts-turris-omnia-enable-LED-controller-node.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From fed7cef5e4f2df8c6a79bebf5da1fdd3783ff6f3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 4 Jul 2022 13:36:22 +0200
-Subject: [PATCH] ARM: dts: turris-omnia: enable LED controller node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The LED controller node is disabled because the leds-turris-omnia driver
-does not support setting the LED blinking to be controlled by the MCU.
-
-The patches for that have now been sent [1], so let's enable the node.
-
-[1] https://lore.kernel.org/linux-leds/20220704105955.15474-1-kabel@kernel.org/T/
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -195,15 +195,13 @@
- 				reg = <0x2b>;
- 				#address-cells = <1>;
- 				#size-cells = <0>;
-+				status = "okay";
- 
- 				/*
- 				 * LEDs are controlled by MCU (STM32F0) at
- 				 * address 0x2b.
- 				 *
--				 * The driver does not support HW control mode
--				 * for the LEDs yet. Disable the LEDs for now.
--				 *
--				 * Also LED functions are not stable yet:
-+				 * LED functions are not stable yet:
- 				 * - there are 3 LEDs connected via MCU to PCIe
- 				 *   ports. One of these ports supports mSATA.
- 				 *   There is no mSATA nor PCIe function.
-@@ -214,7 +212,6 @@
- 				 *   B. Again there is no such function defined.
- 				 *   For now we use LED_FUNCTION_INDICATOR
- 				 */
--				status = "disabled";
- 
- 				multi-led@0 {
- 					reg = <0x0>;
diff --git a/target/linux/mvebu/patches-5.10/102-leds-turris-omnia-support-HW-controlled-mode-via-pri.patch b/target/linux/mvebu/patches-5.10/102-leds-turris-omnia-support-HW-controlled-mode-via-pri.patch
deleted file mode 100644
index 578124f94d4b..000000000000
--- a/target/linux/mvebu/patches-5.10/102-leds-turris-omnia-support-HW-controlled-mode-via-pri.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From 80e643510cb14f116f687e992210c0008a09d869 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 4 Jul 2022 12:59:53 +0200
-Subject: [PATCH] leds: turris-omnia: support HW controlled mode via
- private trigger
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add support for enabling MCU controlled mode of the Turris Omnia LEDs
-via a LED private trigger called "omnia-mcu".
-
-When in MCU controlled mode, the user can still set LED color, but the
-blinking is done by MCU, which does different things for various LEDs:
-- WAN LED is blinked according to the LED[0] pin of the WAN PHY
-- LAN LEDs are blinked according to the LED[0] output of corresponding
-  port of the LAN switch
-- PCIe LEDs are blinked according to the logical OR of the MiniPCIe port
-  LED pins
-
-For a long time I wanted to actually do this differently: I wanted to
-make the netdev trigger to transparently offload the blinking to the HW
-if user set compatible settings for the netdev trigger.
-There was some work on this, and hopefully we will be able to complete
-it sometime, but since there are various complications, it will probably
-not be soon.
-
-In the meantime let's support HW controlled mode via this private LED
-trigger. If, in the future, we manage to complete the netdev trigger
-offloading, we can still keep this private trigger for backwards
-compatiblity, if needed.
-
-We also set "omnia-mcu" to cdev->default_trigger, so that the MCU keeps
-control until the user first wants to take over it. If a different
-default trigger is specified in device-tree via the
-`linux,default-trigger` property, LED class will overwrite
-cdev->default_trigger, and so the DT property will be respected.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/leds/Kconfig             |  1 +
- drivers/leds/leds-turris-omnia.c | 41 ++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -182,6 +182,7 @@ config LEDS_TURRIS_OMNIA
- 	depends on I2C
- 	depends on MACH_ARMADA_38X || COMPILE_TEST
- 	depends on OF
-+	select LEDS_TRIGGERS
- 	help
- 	  This option enables basic support for the LEDs found on the front
- 	  side of CZ.NIC's Turris Omnia router. There are 12 RGB LEDs on the
---- a/drivers/leds/leds-turris-omnia.c
-+++ b/drivers/leds/leds-turris-omnia.c
-@@ -49,6 +49,39 @@ struct omnia_leds {
- 	struct omnia_led leds[];
- };
- 
-+static struct led_hw_trigger_type omnia_hw_trigger_type;
-+
-+static int omnia_hwtrig_activate(struct led_classdev *cdev)
-+{
-+	struct omnia_leds *leds = dev_get_drvdata(cdev->dev->parent);
-+	struct omnia_led *led = to_omnia_led(lcdev_to_mccdev(cdev));
-+
-+	/* put the LED into MCU controlled mode */
-+	return i2c_smbus_write_byte_data(leds->client, CMD_LED_MODE,
-+					 CMD_LED_MODE_LED(led->reg));
-+}
-+
-+static void omnia_hwtrig_deactivate(struct led_classdev *cdev)
-+{
-+	struct omnia_leds *leds = dev_get_drvdata(cdev->dev->parent);
-+	struct omnia_led *led = to_omnia_led(lcdev_to_mccdev(cdev));
-+	int ret;
-+
-+	/* put the LED into software mode */
-+	ret = i2c_smbus_write_byte_data(leds->client, CMD_LED_MODE,
-+					CMD_LED_MODE_LED(led->reg) |
-+					CMD_LED_MODE_USER);
-+	if (ret < 0)
-+		dev_err(cdev->dev, "Cannot put to software mode: %i\n", ret);
-+}
-+
-+static struct led_trigger omnia_hw_trigger = {
-+	.name		= "omnia-mcu",
-+	.activate	= omnia_hwtrig_activate,
-+	.deactivate	= omnia_hwtrig_deactivate,
-+	.trigger_type	= &omnia_hw_trigger_type,
-+};
-+
- static int omnia_led_brightness_set_blocking(struct led_classdev *cdev,
- 					     enum led_brightness brightness)
- {
-@@ -120,6 +153,8 @@ static int omnia_led_register(struct i2c
- 	cdev = &led->mc_cdev.led_cdev;
- 	cdev->max_brightness = 255;
- 	cdev->brightness_set_blocking = omnia_led_brightness_set_blocking;
-+	cdev->trigger_type = &omnia_hw_trigger_type;
-+	cdev->default_trigger = omnia_hw_trigger.name;
- 
- 	/* put the LED into software mode */
- 	ret = i2c_smbus_write_byte_data(client, CMD_LED_MODE,
-@@ -231,6 +266,12 @@ static int omnia_leds_probe(struct i2c_c
- 
- 	mutex_init(&leds->lock);
- 
-+	ret = devm_led_trigger_register(dev, &omnia_hw_trigger);
-+	if (ret < 0) {
-+		dev_err(dev, "Cannot register private LED trigger: %d\n", ret);
-+		return ret;
-+	}
-+
- 	led = &leds->leds[0];
- 	for_each_available_child_of_node(np, child) {
- 		ret = omnia_led_register(client, led, child);
diff --git a/target/linux/mvebu/patches-5.10/103-leds-turris-omnia-initialize-multi-intensity-to-full.patch b/target/linux/mvebu/patches-5.10/103-leds-turris-omnia-initialize-multi-intensity-to-full.patch
deleted file mode 100644
index 6f9aaf11dbb8..000000000000
--- a/target/linux/mvebu/patches-5.10/103-leds-turris-omnia-initialize-multi-intensity-to-full.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From bda176cceb735b9b46c1900658b6486c34e13ae6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 4 Jul 2022 12:59:54 +0200
-Subject: [PATCH] leds: turris-omnia: initialize multi-intensity to full
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The default color of each LED before driver probe (255, 255, 255).
-Initialize multi_intensity to this value, so that it corresponds to the
-reality.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/leds/leds-turris-omnia.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/leds/leds-turris-omnia.c
-+++ b/drivers/leds/leds-turris-omnia.c
-@@ -139,10 +139,13 @@ static int omnia_led_register(struct i2c
- 	}
- 
- 	led->subled_info[0].color_index = LED_COLOR_ID_RED;
-+	led->subled_info[0].intensity = 255;
- 	led->subled_info[0].channel = 0;
- 	led->subled_info[1].color_index = LED_COLOR_ID_GREEN;
-+	led->subled_info[1].intensity = 255;
- 	led->subled_info[1].channel = 1;
- 	led->subled_info[2].color_index = LED_COLOR_ID_BLUE;
-+	led->subled_info[2].intensity = 255;
- 	led->subled_info[2].channel = 2;
- 
- 	led->mc_cdev.subled_info = led->subled_info;
diff --git a/target/linux/mvebu/patches-5.10/104-leds-turris-omnia-change-max-brightness-from-255-to-.patch b/target/linux/mvebu/patches-5.10/104-leds-turris-omnia-change-max-brightness-from-255-to-.patch
deleted file mode 100644
index da4ad49b23ce..000000000000
--- a/target/linux/mvebu/patches-5.10/104-leds-turris-omnia-change-max-brightness-from-255-to-.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 349cbe949b9622cc05b148ecfa6268cbbae35b45 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 4 Jul 2022 12:59:55 +0200
-Subject: [PATCH] leds: turris-omnia: change max brightness from 255 to 1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Using binary brightness makes more sense for this controller, because
-internally in the MCU it works that way: the LED has a color, and a
-state whether it is ON or OFF.
-
-The resulting brightness computation with led_mc_calc_color_components()
-will now always result in either (0, 0, 0) or the multi_intensity value.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/leds/leds-turris-omnia.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/leds/leds-turris-omnia.c
-+++ b/drivers/leds/leds-turris-omnia.c
-@@ -154,7 +154,7 @@ static int omnia_led_register(struct i2c
- 	init_data.fwnode = &np->fwnode;
- 
- 	cdev = &led->mc_cdev.led_cdev;
--	cdev->max_brightness = 255;
-+	cdev->max_brightness = 1;
- 	cdev->brightness_set_blocking = omnia_led_brightness_set_blocking;
- 	cdev->trigger_type = &omnia_hw_trigger_type;
- 	cdev->default_trigger = omnia_hw_trigger.name;
diff --git a/target/linux/mvebu/patches-5.10/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/mvebu/patches-5.10/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
deleted file mode 100644
index 04c80113c152..000000000000
--- a/target/linux/mvebu/patches-5.10/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
+++ /dev/null
@@ -1,208 +0,0 @@
-From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
-From: Adrian Panella <ianchi74@outlook.com>
-Date: Thu, 9 Mar 2017 09:37:17 +0100
-Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
-
-The command-line arguments provided by the boot loader will be
-appended to a new device tree property: bootloader-args.
-If there is a property "append-rootblock" in DT under /chosen
-and a root= option in bootloaders command line it will be parsed
-and added to DT bootargs with the form: <append-rootblock>XX.
-Only command line ATAG will be processed, the rest of the ATAGs
-sent by bootloader will be ignored.
-This is usefull in dual boot systems, to get the current root partition
-without afecting the rest of the system.
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
-
-This patch has been modified to be mvebu specific. The original patch 
-did not pass the bootloader cmdline on if no append-rootblock stanza 
-was found, resulting in blank cmdline and failure to boot.
-
-Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
----
- arch/arm/Kconfig                        | 11 ++++
- arch/arm/boot/compressed/atags_to_fdt.c | 85 ++++++++++++++++++++++++-
- init/main.c                             | 16 +++++
- 3 files changed, 111 insertions(+), 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1777,6 +1777,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- 	  The command-line arguments provided by the boot loader will be
- 	  appended to the the device tree bootargs property.
- 
-+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+	bool "Append rootblock parsing bootloader's kernel arguments"
-+	help
-+	  The command-line arguments provided by the boot loader will be
-+	  appended to a new device tree property: bootloader-args.
-+	  If there is a property "append-rootblock" in DT under /chosen 
-+	  and a root= option in bootloaders command line it will be parsed 
-+	  and added to DT bootargs with the form: <append-rootblock>XX.
-+	  Only command line ATAG will be processed, the rest of the ATAGs
-+	  sent by bootloader will be ignored.
-+
- endchoice
- 
- config CMDLINE
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -5,6 +5,8 @@
- 
- #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
- #define do_extend_cmdline 1
-+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#define do_extend_cmdline 1
- #else
- #define do_extend_cmdline 0
- #endif
-@@ -69,6 +71,72 @@ static uint32_t get_cell_size(const void
- 	return cell_size;
- }
- 
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+
-+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
-+{
-+	char *ptr, *end;
-+	char *root="root=";
-+	int i, l;
-+	const char *rootblock;
-+
-+	//ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
-+	ptr = str - 1;
-+
-+	do {
-+		//first find an 'r' at the begining or after a space
-+		do {
-+			ptr++;
-+			ptr = strchr(ptr, 'r');
-+			if (!ptr)
-+				goto no_append;
-+
-+		} while (ptr != str && *(ptr-1) != ' ');
-+
-+		//then check for the rest
-+		for(i = 1; i <= 4; i++)
-+			if(*(ptr+i) != *(root+i)) break;
-+
-+	} while (i != 5);
-+
-+	end = strchr(ptr, ' ');
-+	end = end ? (end - 1) : (strchr(ptr, 0) - 1);
-+
-+	//find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
-+	for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
-+	ptr = end + 1;
-+
-+	/* if append-rootblock property is set use it to append to command line */
-+	rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
-+	if (rootblock == NULL)
-+		goto no_append;
-+
-+	if (*dest != ' ') {
-+		*dest = ' ';
-+		dest++;
-+		len++;
-+	}
-+
-+	if (len + l + i <= COMMAND_LINE_SIZE) {
-+		memcpy(dest, rootblock, l);
-+		dest += l - 1;
-+		memcpy(dest, ptr, i);
-+		dest += i;
-+	}
-+
-+	return dest;
-+
-+no_append:
-+	len = strlen(str);
-+	if (len + 1 < COMMAND_LINE_SIZE) {
-+		memcpy(dest, str, len);
-+		dest += len;
-+	}
-+
-+	return dest;
-+}
-+#endif
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- 	char cmdline[COMMAND_LINE_SIZE];
-@@ -88,12 +156,21 @@ static void merge_fdt_bootargs(void *fdt
- 
- 	/* and append the ATAG_CMDLINE */
- 	if (fdt_cmdline) {
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+		//save original bootloader args
-+		//and append ubi.mtd with root partition number to current cmdline
-+		setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
-+		ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
-+
-+#else
- 		len = strlen(fdt_cmdline);
- 		if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- 			*ptr++ = ' ';
- 			memcpy(ptr, fdt_cmdline, len);
- 			ptr += len;
- 		}
-+#endif
- 	}
- 	*ptr = '\0';
- 
-@@ -168,7 +245,9 @@ int atags_to_fdt(void *atag_list, void *
- 			else
- 				setprop_string(fdt, "/chosen", "bootargs",
- 					       atag->u.cmdline.cmdline);
--		} else if (atag->hdr.tag == ATAG_MEM) {
-+		}
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+		else if (atag->hdr.tag == ATAG_MEM) {
- 			if (memcount >= sizeof(mem_reg_property)/4)
- 				continue;
- 			if (!atag->u.mem.size)
-@@ -212,6 +291,10 @@ int atags_to_fdt(void *atag_list, void *
- 		setprop(fdt, "/memory", "reg", mem_reg_property,
- 			4 * memcount * memsize);
- 	}
-+#else
-+
-+	}
-+#endif
- 
- 	return fdt_pack(fdt);
- }
---- a/init/main.c
-+++ b/init/main.c
-@@ -110,6 +110,10 @@
- 
- #include <kunit/test.h>
- 
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#include <linux/of.h>
-+#endif
-+
- static int kernel_init(void *);
- 
- extern void init_IRQ(void);
-@@ -904,6 +908,18 @@ asmlinkage __visible void __init __no_sa
- 	page_alloc_init();
- 
- 	pr_notice("Kernel command line: %s\n", saved_command_line);
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+	//Show bootloader's original command line for reference
-+	if(of_chosen) {
-+		const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
-+		if(prop)
-+			pr_notice("Bootloader command line (ignored): %s\n", prop);
-+		else
-+			pr_notice("Bootloader command line not present\n");
-+	}
-+#endif
-+
- 	/* parameters may set static keys */
- 	jump_label_init();
- 	parse_early_param();
diff --git a/target/linux/mvebu/patches-5.10/301-mvebu-armada-38x-enable-libata-leds.patch b/target/linux/mvebu/patches-5.10/301-mvebu-armada-38x-enable-libata-leds.patch
deleted file mode 100644
index 615caac24f4b..000000000000
--- a/target/linux/mvebu/patches-5.10/301-mvebu-armada-38x-enable-libata-leds.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -67,6 +67,7 @@ config MACH_ARMADA_38X
- 	select HAVE_ARM_TWD if SMP
- 	select MACH_MVEBU_V7
- 	select PINCTRL_ARMADA_38X
-+	select ARCH_WANT_LIBATA_LEDS
- 	help
- 	  Say 'Y' here if you want your kernel to support boards based
- 	  on the Marvell Armada 380/385 SoC with device tree.
diff --git a/target/linux/mvebu/patches-5.10/302-add_powertables.patch b/target/linux/mvebu/patches-5.10/302-add_powertables.patch
deleted file mode 100644
index efbbbc7d786a..000000000000
--- a/target/linux/mvebu/patches-5.10/302-add_powertables.patch
+++ /dev/null
@@ -1,770 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -212,11 +212,19 @@
- &pcie1 {
- 	/* Marvell 88W8864, 5GHz-only */
- 	status = "okay";
-+
-+	mwlwifi {
-+		marvell,2ghz = <0>;
-+	};
- };
- 
- &pcie2 {
- 	/* Marvell 88W8864, 2GHz-only */
- 	status = "okay";
-+
-+	mwlwifi {
-+		marvell,5ghz = <0>;
-+	};
- };
- 
- &pinctrl {
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -142,3 +142,205 @@
- 		};
- 	};
- };
-+
-+&pcie1 {
-+	mwlwifi {
-+		marvell,chainmask = <2 2>;
-+		marvell,powertable {
-+			AU =
-+				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>;
-+			CA =
-+				<36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+				<40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+				<44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+				<48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+			CN =
-+				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>;
-+			ETSI =
-+				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>;
-+			FCC =
-+				<36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+		};
-+	};
-+};
-+
-+&pcie2 {
-+	mwlwifi {
-+		marvell,chainmask = <2 2>;
-+		marvell,powertable {
-+			AU =
-+				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+			CA =
-+				<1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>,
-+				<2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>;
-+			CN =
-+				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+			ETSI =
-+				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+			FCC =
-+				<1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -142,3 +142,205 @@
- 		};
- 	};
- };
-+
-+&pcie1 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+		marvell,powertable {
-+			AU =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+			CA =
-+				<36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+			CN =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+			ETSI =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+			FCC =
-+				<36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+				<40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+		};
-+	};
-+};
-+
-+&pcie2 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+		marvell,powertable {
-+			AU =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			CA =
-+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+			CN =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			ETSI =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			FCC =
-+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -142,3 +142,205 @@
- 		};
- 	};
- };
-+
-+&pcie1 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+		marvell,powertable {
-+			AU =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+			CA =
-+				<36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+			CN =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+			ETSI =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+			FCC =
-+				<36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+				<40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+		};
-+	};
-+};
-+
-+&pcie2 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+		marvell,powertable {
-+			AU =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			CA =
-+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+			CN =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			ETSI =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			FCC =
-+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -157,6 +157,18 @@
- 	};
- };
- 
-+&pcie1 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+	};
-+};
-+
-+&pcie2 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+	};
-+};
-+
- &sdhci {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&sdhci_pins>;
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -225,12 +225,100 @@
- 	pcie@2,0 {
- 		/* Port 0, Lane 1 */
- 		status = "okay";
-+
-+		mwlwifi {
-+			marvell,5ghz = <0>;
-+			marvell,chainmask = <4 4>;
-+			marvell,powertable {
-+				FCC =
-+					<1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
-+					<2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
-+
-+				ETSI =
-+					<1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
-+			};
-+		};
- 	};
- 
- 	/* Second mini-PCIe port */
- 	pcie@3,0 {
- 		/* Port 0, Lane 3 */
- 		status = "okay";
-+
-+		mwlwifi {
-+			marvell,2ghz = <0>;
-+			marvell,chainmask = <4 4>;
-+			marvell,powertable {
-+				FCC =
-+					<36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+					<40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+					<44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+					<48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+					<52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+					<56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+					<60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+					<64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+					<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+					<153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+					<157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+					<161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+					<165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
-+
-+				ETSI =
-+					<36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
-+			};
-+		};
- 	};
- };
- 
diff --git a/target/linux/mvebu/patches-5.10/303-linksys_hardcode_nand_ecc_settings.patch b/target/linux/mvebu/patches-5.10/303-linksys_hardcode_nand_ecc_settings.patch
deleted file mode 100644
index 89a5e1980357..000000000000
--- a/target/linux/mvebu/patches-5.10/303-linksys_hardcode_nand_ecc_settings.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-Newer Linksys boards might come with a Winbond W29N02GV which can be
-configured in different ways. Make sure we configure it the same way
-as the older chips so everything keeps working.
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -148,6 +148,8 @@
- 		reg = <0>;
- 		label = "pxa3xx_nand-0";
- 		nand-rb = <0>;
-+		nand-ecc-strength = <4>;
-+		nand-ecc-step-size = <512>;
- 		marvell,nand-keep-config;
- 		nand-on-flash-bbt;
- 	};
diff --git a/target/linux/mvebu/patches-5.10/304-revert_i2c_delay.patch b/target/linux/mvebu/patches-5.10/304-revert_i2c_delay.patch
deleted file mode 100644
index 930c0f94942b..000000000000
--- a/target/linux/mvebu/patches-5.10/304-revert_i2c_delay.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -237,12 +237,10 @@
- };
- 
- &i2c0 {
--	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- 	reg = <0x11000 0x100>;
- };
- 
- &i2c1 {
--	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- 	reg = <0x11100 0x100>;
- };
- 
diff --git a/target/linux/mvebu/patches-5.10/305-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-5.10/305-armada-385-rd-mtd-partitions.patch
deleted file mode 100644
index 31bd53b1f3be..000000000000
--- a/target/linux/mvebu/patches-5.10/305-armada-385-rd-mtd-partitions.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/arm/boot/dts/armada-388-rd.dts
-+++ b/arch/arm/boot/dts/armada-388-rd.dts
-@@ -103,6 +103,16 @@
- 		compatible = "st,m25p128", "jedec,spi-nor";
- 		reg = <0>; /* Chip select 0 */
- 		spi-max-frequency = <108000000>;
-+
-+		partition@0 {
-+			label = "uboot";
-+			reg = <0 0x400000>;
-+		};
-+
-+		partition@1 {
-+			label = "firmware";
-+			reg = <0x400000 0xc00000>;
-+		};
- 	};
- };
- 
diff --git a/target/linux/mvebu/patches-5.10/306-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-5.10/306-ARM-mvebu-385-ap-Add-partitions.patch
deleted file mode 100644
index 2057e31c7e97..000000000000
--- a/target/linux/mvebu/patches-5.10/306-ARM-mvebu-385-ap-Add-partitions.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 13 Jan 2015 11:14:09 +0100
-Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -218,19 +218,19 @@
- 			#size-cells = <1>;
- 
- 			partition@0 {
--				label = "U-Boot";
-+				label = "u-boot";
- 				reg = <0x00000000 0x00800000>;
- 				read-only;
- 			};
- 
- 			partition@800000 {
--				label = "uImage";
-+				label = "kernel";
- 				reg = <0x00800000 0x00400000>;
- 				read-only;
- 			};
- 
- 			partition@c00000 {
--				label = "Root";
-+				label = "ubi";
- 				reg = <0x00c00000 0x3f400000>;
- 			};
- 		};
diff --git a/target/linux/mvebu/patches-5.10/307-armada-xp-linksys-mamba-broken-idle.patch b/target/linux/mvebu/patches-5.10/307-armada-xp-linksys-mamba-broken-idle.patch
deleted file mode 100644
index 16112d53fc99..000000000000
--- a/target/linux/mvebu/patches-5.10/307-armada-xp-linksys-mamba-broken-idle.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -485,3 +485,7 @@
- 		};
- 	};
- };
-+
-+&coherencyfab {
-+	broken-idle;
-+};
diff --git a/target/linux/mvebu/patches-5.10/308-armada-xp-linksys-mamba-wan.patch b/target/linux/mvebu/patches-5.10/308-armada-xp-linksys-mamba-wan.patch
deleted file mode 100644
index 4315abc7d22a..000000000000
--- a/target/linux/mvebu/patches-5.10/308-armada-xp-linksys-mamba-wan.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -387,7 +387,7 @@
- 
- 			port@4 {
- 				reg = <4>;
--				label = "internet";
-+				label = "wan";
- 			};
- 
- 			port@5 {
diff --git a/target/linux/mvebu/patches-5.10/309-linksys-status-led.patch b/target/linux/mvebu/patches-5.10/309-linksys-status-led.patch
deleted file mode 100644
index e5e83572c9e2..000000000000
--- a/target/linux/mvebu/patches-5.10/309-linksys-status-led.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -14,6 +14,13 @@
- 	compatible = "linksys,armada385", "marvell,armada385",
- 		     "marvell,armada380";
- 
-+	aliases {
-+		led-boot = &led_power;
-+		led-failsafe = &led_power;
-+		led-running = &led_power;
-+		led-upgrade = &led_power;
-+	};
-+
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-@@ -71,7 +78,7 @@
- 		pinctrl-0 = <&gpio_leds_pins>;
- 		pinctrl-names = "default";
- 
--		power {
-+		led_power: power {
- 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
- 			default-state = "on";
- 		};
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -26,6 +26,13 @@
- 	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
- 		     "marvell,armadaxp", "marvell,armada-370-xp";
- 
-+	aliases {
-+		led-boot = &led_power;
-+		led-failsafe = &led_power;
-+		led-running = &led_power;
-+		led-upgrade = &led_power;
-+	};
-+
- 	chosen {
- 		bootargs = "console=ttyS0,115200";
- 		stdout-path = &uart0;
-@@ -197,7 +204,7 @@
- 		pinctrl-0 = <&power_led_pin>;
- 		pinctrl-names = "default";
- 
--		power {
-+		led_power: power {
- 			label = "mamba:white:power";
- 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- 			default-state = "on";
diff --git a/target/linux/mvebu/patches-5.10/310-linksys-use-eth0-as-cpu-port.patch b/target/linux/mvebu/patches-5.10/310-linksys-use-eth0-as-cpu-port.patch
deleted file mode 100644
index 84d49a004b85..000000000000
--- a/target/linux/mvebu/patches-5.10/310-linksys-use-eth0-as-cpu-port.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -116,7 +116,7 @@
- };
- 
- &eth2 {
--	status = "okay";
-+	status = "disabled";
- 	phy-mode = "sgmii";
- 	buffer-manager = <&bm>;
- 	bm,pool-long = <2>;
-@@ -200,10 +200,10 @@
- 				label = "wan";
- 			};
- 
--			port@5 {
--				reg = <5>;
-+			port@6 {
-+				reg = <6>;
- 				label = "cpu";
--				ethernet = <&eth2>;
-+				ethernet = <&eth0>;
- 
- 				fixed-link {
- 					speed = <1000>;
diff --git a/target/linux/mvebu/patches-5.10/311-adjust-compatible-for-linksys.patch b/target/linux/mvebu/patches-5.10/311-adjust-compatible-for-linksys.patch
deleted file mode 100644
index a5d3e6381064..000000000000
--- a/target/linux/mvebu/patches-5.10/311-adjust-compatible-for-linksys.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -12,8 +12,8 @@
- 
- / {
- 	model = "Linksys WRT3200ACM";
--	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
--		     "marvell,armada380";
-+	compatible = "linksys,wrt3200acm", "linksys,rango", "linksys,armada385",
-+		     "marvell,armada385", "marvell,armada380";
- };
- 
- &expander0 {
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -22,9 +22,10 @@
- #include "armada-xp-mv78230.dtsi"
- 
- / {
--	model = "Linksys WRT1900AC";
--	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
--		     "marvell,armadaxp", "marvell,armada-370-xp";
-+	model = "Linksys WRT1900AC v1";
-+	compatible = "linksys,wrt1900ac-v1", "linksys,mamba",
-+		     "marvell,armadaxp-mv78230", "marvell,armadaxp",
-+		     "marvell,armada-370-xp";
- 
- 	aliases {
- 		led-boot = &led_power;
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -9,8 +9,9 @@
- #include "armada-385-linksys.dtsi"
- 
- / {
--	model = "Linksys WRT1900ACv2";
--	compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
-+	model = "Linksys WRT1900AC v2";
-+	compatible = "linksys,wrt1900ac-v2", "linksys,cobra",
-+		     "linksys,armada385", "marvell,armada385",
- 		     "marvell,armada380";
- };
- 
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -10,8 +10,8 @@
- 
- / {
- 	model = "Linksys WRT1200AC";
--	compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
--		     "marvell,armada380";
-+	compatible = "linksys,wrt1200ac", "linksys,caiman", "linksys,armada385",
-+		     "marvell,armada385", "marvell,armada380";
- };
- 
- &expander0 {
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -10,7 +10,8 @@
- 
- / {
- 	model = "Linksys WRT1900ACS";
--	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
-+	compatible = "linksys,wrt1900acs", "linksys,shelby",
-+		     "linksys,armada385", "marvell,armada385",
- 		     "marvell,armada380";
- };
- 
diff --git a/target/linux/mvebu/patches-5.10/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch b/target/linux/mvebu/patches-5.10/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
deleted file mode 100644
index dd2bef7f6321..000000000000
--- a/target/linux/mvebu/patches-5.10/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 29 Nov 2016 10:15:45 +0000
-Subject: ARM: dts: armada388-clearfog: emmc on clearfog base
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- arch/arm/boot/dts/armada-388-clearfog-base.dts     |  1 +
- .../dts/armada-38x-solidrun-microsom-emmc.dtsi     | 62 ++++++++++++++++++++++
- 2 files changed, 63 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-
---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
-@@ -7,6 +7,7 @@
- 
- /dts-v1/;
- #include "armada-388-clearfog.dtsi"
-+#include "armada-38x-solidrun-microsom-emmc.dtsi"
- 
- / {
- 	model = "SolidRun Clearfog Base A1";
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-@@ -0,0 +1,62 @@
-+/*
-+ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC
-+ *
-+ *  Copyright (C) 2015 Russell King
-+ *
-+ * This board is in development; the contents of this file work with
-+ * the A1 rev 2.0 of the board, which does not represent final
-+ * production board.  Things will change, don't expect this file to
-+ * remain compatible info the future.
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License
-+ *     version 2 as published by the Free Software Foundation.
-+ *
-+ *     This file is distributed in the hope that it will be useful
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+/ {
-+	soc {
-+		internal-regs {
-+			sdhci@d8000 {
-+				bus-width = <4>;
-+				no-1-8-v;
-+				non-removable;
-+				pinctrl-0 = <&microsom_sdhci_pins>;
-+				pinctrl-names = "default";
-+				status = "okay";
-+				wp-inverted;
-+			};
-+		};
-+	};
-+};
diff --git a/target/linux/mvebu/patches-5.10/313-helios4-dts-status-led-alias.patch b/target/linux/mvebu/patches-5.10/313-helios4-dts-status-led-alias.patch
deleted file mode 100644
index 607f43629712..000000000000
--- a/target/linux/mvebu/patches-5.10/313-helios4-dts-status-led-alias.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/arch/arm/boot/dts/armada-388-helios4.dts
-+++ b/arch/arm/boot/dts/armada-388-helios4.dts
-@@ -15,6 +15,13 @@
- 	model = "Helios4";
- 	compatible = "kobol,helios4", "marvell,armada388",
- 		"marvell,armada385", "marvell,armada380";
-+		
-+	aliases {
-+		led-boot = &led_status;
-+		led-failsafe = &led_status;
-+		led-running = &led_status;
-+		led-upgrade = &led_status;
-+	};
- 
- 	memory {
- 		device_type = "memory";
-@@ -73,10 +80,9 @@
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&helios_system_led_pins>;
- 
--		status-led {
-+		led_status: status-led {
- 			label = "helios4:green:status";
- 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
--			linux,default-trigger = "heartbeat";
- 			default-state = "on";
- 		};
- 
diff --git a/target/linux/mvebu/patches-5.10/315-armada-xp-linksys-mamba-resize-kernel.patch b/target/linux/mvebu/patches-5.10/315-armada-xp-linksys-mamba-resize-kernel.patch
deleted file mode 100644
index f1fddceff4b0..000000000000
--- a/target/linux/mvebu/patches-5.10/315-armada-xp-linksys-mamba-resize-kernel.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 258233f00bcd013050efee00c5d9128ef8cd62dd Mon Sep 17 00:00:00 2001
-From: Tad <tad@spotco.us>
-Date: Fri, 5 Feb 2021 22:32:11 -0500
-Subject: [PATCH] ARM: dts: armada-xp-linksys-mamba: Increase kernel
- partition to 4MB
-
-Signed-off-by: Tad Davanzo <tad@spotco.us>
----
- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -456,9 +456,9 @@
- 				reg = <0xa00000 0x2800000>;  /* 40MB */
- 			};
- 
--			partition@d00000 {
-+			partition@e00000 {
- 				label = "rootfs1";
--				reg = <0xd00000 0x2500000>;  /* 37MB */
-+				reg = <0xe00000 0x2400000>;  /* 36MB */
- 			};
- 
- 			/* kernel2 overlaps with rootfs2 by design */
-@@ -467,9 +467,9 @@
- 				reg = <0x3200000 0x2800000>; /* 40MB */
- 			};
- 
--			partition@3500000 {
-+			partition@3600000 {
- 				label = "rootfs2";
--				reg = <0x3500000 0x2500000>; /* 37MB */
-+				reg = <0x3600000 0x2400000>; /* 36MB */
- 			};
- 
- 			/*
diff --git a/target/linux/mvebu/patches-5.10/316-armada-370-dts-fix-crypto-engine.patch b/target/linux/mvebu/patches-5.10/316-armada-370-dts-fix-crypto-engine.patch
deleted file mode 100644
index 19378870ef74..000000000000
--- a/target/linux/mvebu/patches-5.10/316-armada-370-dts-fix-crypto-engine.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -234,7 +234,7 @@
- 				clocks = <&gateclk 23>;
- 				clock-names = "cesa0";
- 				marvell,crypto-srams = <&crypto_sram>;
--				marvell,crypto-sram-size = <0x7e0>;
-+				marvell,crypto-sram-size = <0x800>;
- 			};
- 		};
- 
-@@ -255,12 +255,17 @@
- 			 * cpuidle workaround.
- 			 */
- 			idle-sram@0 {
-+				status = "disabled";
- 				reg = <0x0 0x20>;
- 			};
- 		};
- 	};
- };
- 
-+&coherencyfab {
-+	broken-idle;
-+};
-+
- /*
-  * Default UART pinctrl setting without RTS/CTS, can be overwritten on
-  * board level if a different configuration is used.
diff --git a/target/linux/mvebu/patches-5.10/400-find_active_root.patch b/target/linux/mvebu/patches-5.10/400-find_active_root.patch
deleted file mode 100644
index 5582d20c6828..000000000000
--- a/target/linux/mvebu/patches-5.10/400-find_active_root.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d
- 	return of_get_property(pp, "compatible", NULL);
- }
- 
-+static int mangled_rootblock;
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- 				  const struct mtd_partition **pparts,
- 				  struct mtd_part_parser_data *data)
-@@ -48,6 +50,7 @@ static int parse_fixed_partitions(struct
- 	struct device_node *mtd_node;
- 	struct device_node *ofpart_node;
- 	const char *partname;
-+	const char *owrtpart = "ubi";
- 	struct device_node *pp;
- 	int nr_parts, i, ret = 0;
- 	bool dedicated = true;
-@@ -133,9 +136,13 @@ static int parse_fixed_partitions(struct
- 		parts[i].size = of_read_number(reg + a_cells, s_cells);
- 		parts[i].of_node = pp;
- 
--		partname = of_get_property(pp, "label", &len);
--		if (!partname)
--			partname = of_get_property(pp, "name", &len);
-+		if (mangled_rootblock && (i == mangled_rootblock)) {
-+			partname = owrtpart;
-+		} else {
-+			partname = of_get_property(pp, "label", &len);
-+			if (!partname)
-+				partname = of_get_property(pp, "name", &len);
-+		}
- 		parts[i].name = partname;
- 
- 		if (of_get_property(pp, "read-only", &len))
-@@ -252,6 +259,18 @@ static int __init ofpart_parser_init(voi
- 	return 0;
- }
- 
-+static int __init active_root(char *str)
-+{
-+	get_option(&str, &mangled_rootblock);
-+
-+	if (!mangled_rootblock)
-+		return 1;
-+
-+	return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- 	deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/mvebu/patches-5.10/700-mvneta-tx-queue-workaround.patch b/target/linux/mvebu/patches-5.10/700-mvneta-tx-queue-workaround.patch
deleted file mode 100644
index a0f15681f52f..000000000000
--- a/target/linux/mvebu/patches-5.10/700-mvneta-tx-queue-workaround.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-The hardware queue scheduling is apparently configured with fixed
-priorities, which creates a nasty fairness issue where traffic from one
-CPU can starve traffic from all other CPUs.
-
-Work around this issue by forcing all tx packets to go through one CPU,
-until this issue is fixed properly.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4903,6 +4903,16 @@ static int mvneta_ethtool_set_eee(struct
- 	return phylink_ethtool_set_eee(pp->phylink, eee);
- }
- 
-+#ifndef CONFIG_ARM64
-+static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
-+			       struct net_device *sb_dev)
-+{
-+	/* XXX: hardware queue scheduling is broken,
-+	 * use only one queue until it is fixed */
-+	return 0;
-+}
-+#endif
-+
- static const struct net_device_ops mvneta_netdev_ops = {
- 	.ndo_open            = mvneta_open,
- 	.ndo_stop            = mvneta_stop,
-@@ -4913,6 +4923,9 @@ static const struct net_device_ops mvnet
- 	.ndo_fix_features    = mvneta_fix_features,
- 	.ndo_get_stats64     = mvneta_get_stats64,
- 	.ndo_do_ioctl        = mvneta_ioctl,
-+#ifndef CONFIG_ARM64
-+	.ndo_select_queue    = mvneta_select_queue,
-+#endif
- 	.ndo_bpf	     = mvneta_xdp,
- 	.ndo_xdp_xmit        = mvneta_xdp_xmit,
- };
diff --git a/target/linux/mvebu/patches-5.10/701-v5.14-net-ethernet-marvell-mvnetaMQPrio.patch b/target/linux/mvebu/patches-5.10/701-v5.14-net-ethernet-marvell-mvnetaMQPrio.patch
deleted file mode 100644
index 36d4942f8b65..000000000000
--- a/target/linux/mvebu/patches-5.10/701-v5.14-net-ethernet-marvell-mvnetaMQPrio.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From 4906887a8ae5f1296f8079bcf4565a6092a8e402 Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Date: Tue, 16 Feb 2021 10:25:36 +0100
-Subject: net: mvneta: Implement mqprio support
-
-Implement a basic MQPrio support, inserting rules in RX that translate
-the TC to prio mapping into vlan prio to queues.
-
-The TX logic stays the same as when we don't offload the qdisc.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 61 +++++++++++++++++++++++++++++++++++
- 1 file changed, 61 insertions(+)
-
-(limited to 'drivers/net/ethernet/marvell/mvneta.c')
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -102,6 +102,8 @@
- #define      MVNETA_TX_NO_DATA_SWAP              BIT(5)
- #define      MVNETA_DESC_SWAP                    BIT(6)
- #define      MVNETA_TX_BRST_SZ_MASK(burst)       ((burst) << 22)
-+#define	MVNETA_VLAN_PRIO_TO_RXQ			 0x2440
-+#define      MVNETA_VLAN_PRIO_RXQ_MAP(prio, rxq) ((rxq) << ((prio) * 3))
- #define MVNETA_PORT_STATUS                       0x2444
- #define      MVNETA_TX_IN_PRGRS                  BIT(0)
- #define      MVNETA_TX_FIFO_EMPTY                BIT(8)
-@@ -490,6 +492,7 @@ struct mvneta_port {
- 	u8 mcast_count[256];
- 	u16 tx_ring_size;
- 	u16 rx_ring_size;
-+	u8 prio_tc_map[8];
- 
- 	phy_interface_t phy_interface;
- 	struct device_node *dn;
-@@ -4913,6 +4916,63 @@ static u16 mvneta_select_queue(struct ne
- }
- #endif
- 
-+static void mvneta_clear_rx_prio_map(struct mvneta_port *pp)
-+{
-+	mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, 0);
-+}
-+
-+static void mvneta_setup_rx_prio_map(struct mvneta_port *pp)
-+{
-+	u32 val = 0;
-+	int i;
-+
-+	for (i = 0; i < rxq_number; i++)
-+		val |= MVNETA_VLAN_PRIO_RXQ_MAP(i, pp->prio_tc_map[i]);
-+
-+	mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val);
-+}
-+
-+static int mvneta_setup_mqprio(struct net_device *dev,
-+			       struct tc_mqprio_qopt *qopt)
-+{
-+	struct mvneta_port *pp = netdev_priv(dev);
-+	u8 num_tc;
-+	int i;
-+
-+	qopt->hw = TC_MQPRIO_HW_OFFLOAD_TCS;
-+	num_tc = qopt->num_tc;
-+
-+	if (num_tc > rxq_number)
-+		return -EINVAL;
-+
-+	if (!num_tc) {
-+		mvneta_clear_rx_prio_map(pp);
-+		netdev_reset_tc(dev);
-+		return 0;
-+	}
-+
-+	memcpy(pp->prio_tc_map, qopt->prio_tc_map, sizeof(pp->prio_tc_map));
-+
-+	mvneta_setup_rx_prio_map(pp);
-+
-+	netdev_set_num_tc(dev, qopt->num_tc);
-+	for (i = 0; i < qopt->num_tc; i++)
-+		netdev_set_tc_queue(dev, i, qopt->count[i], qopt->offset[i]);
-+
-+	return 0;
-+}
-+
-+static int mvneta_setup_tc(struct net_device *dev, enum tc_setup_type type,
-+			   void *type_data)
-+{
-+	switch (type) {
-+	case TC_SETUP_QDISC_MQPRIO:
-+		return mvneta_setup_mqprio(dev, type_data);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
- static const struct net_device_ops mvneta_netdev_ops = {
- 	.ndo_open            = mvneta_open,
- 	.ndo_stop            = mvneta_stop,
-@@ -4928,6 +4988,7 @@ static const struct net_device_ops mvnet
- #endif
- 	.ndo_bpf	     = mvneta_xdp,
- 	.ndo_xdp_xmit        = mvneta_xdp_xmit,
-+	.ndo_setup_tc	     = mvneta_setup_tc,
- };
- 
- static const struct ethtool_ops mvneta_eth_tool_ops = {
diff --git a/target/linux/mvebu/patches-5.10/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch b/target/linux/mvebu/patches-5.10/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch
deleted file mode 100644
index 41f8c1fbfd69..000000000000
--- a/target/linux/mvebu/patches-5.10/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 75fa71e3acadbb4ab5eda18505277eb9a1f69b23 Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Date: Fri, 26 Nov 2021 12:20:53 +0100
-Subject: net: mvneta: Use struct tc_mqprio_qopt_offload for MQPrio
- configuration
-
-The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt,
-that allows passing extra parameters, such as traffic shaping. This commit
-converts the current mqprio code to that new struct.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 17 ++++++++++-------
- 1 file changed, 10 insertions(+), 7 deletions(-)
-
-(limited to 'drivers/net/ethernet/marvell/mvneta.c')
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -38,6 +38,7 @@
- #include <net/ipv6.h>
- #include <net/tso.h>
- #include <net/page_pool.h>
-+#include <net/pkt_cls.h>
- #include <linux/bpf_trace.h>
- 
- /* Registers */
-@@ -4933,14 +4934,14 @@ static void mvneta_setup_rx_prio_map(str
- }
- 
- static int mvneta_setup_mqprio(struct net_device *dev,
--			       struct tc_mqprio_qopt *qopt)
-+			       struct tc_mqprio_qopt_offload *mqprio)
- {
- 	struct mvneta_port *pp = netdev_priv(dev);
- 	u8 num_tc;
- 	int i;
- 
--	qopt->hw = TC_MQPRIO_HW_OFFLOAD_TCS;
--	num_tc = qopt->num_tc;
-+	mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS;
-+	num_tc = mqprio->qopt.num_tc;
- 
- 	if (num_tc > rxq_number)
- 		return -EINVAL;
-@@ -4951,13 +4952,15 @@ static int mvneta_setup_mqprio(struct ne
- 		return 0;
- 	}
- 
--	memcpy(pp->prio_tc_map, qopt->prio_tc_map, sizeof(pp->prio_tc_map));
-+	memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map,
-+	       sizeof(pp->prio_tc_map));
- 
- 	mvneta_setup_rx_prio_map(pp);
- 
--	netdev_set_num_tc(dev, qopt->num_tc);
--	for (i = 0; i < qopt->num_tc; i++)
--		netdev_set_tc_queue(dev, i, qopt->count[i], qopt->offset[i]);
-+	netdev_set_num_tc(dev, mqprio->qopt.num_tc);
-+	for (i = 0; i < mqprio->qopt.num_tc; i++)
-+		netdev_set_tc_queue(dev, i, mqprio->qopt.count[i],
-+				    mqprio->qopt.offset[i]);
- 
- 	return 0;
- }
diff --git a/target/linux/mvebu/patches-5.10/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch b/target/linux/mvebu/patches-5.10/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch
deleted file mode 100644
index 8529b6ae5e46..000000000000
--- a/target/linux/mvebu/patches-5.10/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From e7ca75fe6662f78bfeb0112671c812e4c7b8e214 Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Date: Fri, 26 Nov 2021 12:20:54 +0100
-Subject: net: mvneta: Don't force-set the offloading flag
-
-The qopt->hw flag is set by the TC code according to the offloading mode
-asked by user. Don't force-set it in the driver, but instead read it to
-make sure we do what's asked.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-(limited to 'drivers/net/ethernet/marvell/mvneta.c')
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4940,7 +4940,9 @@ static int mvneta_setup_mqprio(struct ne
- 	u8 num_tc;
- 	int i;
- 
--	mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS;
-+	if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS)
-+		return 0;
-+
- 	num_tc = mqprio->qopt.num_tc;
- 
- 	if (num_tc > rxq_number)
diff --git a/target/linux/mvebu/patches-5.10/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch b/target/linux/mvebu/patches-5.10/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch
deleted file mode 100644
index ed4f0441dd07..000000000000
--- a/target/linux/mvebu/patches-5.10/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From e9f7099d0730341b24c057acbf545dd019581db6 Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Date: Fri, 26 Nov 2021 12:20:55 +0100
-Subject: net: mvneta: Allow having more than one queue per TC
-
-The current mqprio implementation assumed that we are only using one
-queue per TC. Use the offset and count parameters to allow using
-multiple queues per TC. In that case, the controller will use a standard
-round-robin algorithm to pick queues assigned to the same TC, with the
-same priority.
-
-This only applies to VLAN priorities in ingress traffic, each TC
-corresponding to a vlan priority.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 35 ++++++++++++++++++++---------------
- 1 file changed, 20 insertions(+), 15 deletions(-)
-
-(limited to 'drivers/net/ethernet/marvell/mvneta.c')
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -493,7 +493,6 @@ struct mvneta_port {
- 	u8 mcast_count[256];
- 	u16 tx_ring_size;
- 	u16 rx_ring_size;
--	u8 prio_tc_map[8];
- 
- 	phy_interface_t phy_interface;
- 	struct device_node *dn;
-@@ -4922,13 +4921,12 @@ static void mvneta_clear_rx_prio_map(str
- 	mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, 0);
- }
- 
--static void mvneta_setup_rx_prio_map(struct mvneta_port *pp)
-+static void mvneta_map_vlan_prio_to_rxq(struct mvneta_port *pp, u8 pri, u8 rxq)
- {
--	u32 val = 0;
--	int i;
-+	u32 val = mvreg_read(pp, MVNETA_VLAN_PRIO_TO_RXQ);
- 
--	for (i = 0; i < rxq_number; i++)
--		val |= MVNETA_VLAN_PRIO_RXQ_MAP(i, pp->prio_tc_map[i]);
-+	val &= ~MVNETA_VLAN_PRIO_RXQ_MAP(pri, 0x7);
-+	val |= MVNETA_VLAN_PRIO_RXQ_MAP(pri, rxq);
- 
- 	mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val);
- }
-@@ -4937,8 +4935,8 @@ static int mvneta_setup_mqprio(struct ne
- 			       struct tc_mqprio_qopt_offload *mqprio)
- {
- 	struct mvneta_port *pp = netdev_priv(dev);
-+	int rxq, tc;
- 	u8 num_tc;
--	int i;
- 
- 	if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS)
- 		return 0;
-@@ -4948,21 +4946,28 @@ static int mvneta_setup_mqprio(struct ne
- 	if (num_tc > rxq_number)
- 		return -EINVAL;
- 
-+	mvneta_clear_rx_prio_map(pp);
-+
- 	if (!num_tc) {
--		mvneta_clear_rx_prio_map(pp);
- 		netdev_reset_tc(dev);
- 		return 0;
- 	}
- 
--	memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map,
--	       sizeof(pp->prio_tc_map));
-+	netdev_set_num_tc(dev, mqprio->qopt.num_tc);
- 
--	mvneta_setup_rx_prio_map(pp);
-+	for (tc = 0; tc < mqprio->qopt.num_tc; tc++) {
-+		netdev_set_tc_queue(dev, tc, mqprio->qopt.count[tc],
-+				    mqprio->qopt.offset[tc]);
-+
-+		for (rxq = mqprio->qopt.offset[tc];
-+		     rxq < mqprio->qopt.count[tc] + mqprio->qopt.offset[tc];
-+		     rxq++) {
-+			if (rxq >= rxq_number)
-+				return -EINVAL;
- 
--	netdev_set_num_tc(dev, mqprio->qopt.num_tc);
--	for (i = 0; i < mqprio->qopt.num_tc; i++)
--		netdev_set_tc_queue(dev, i, mqprio->qopt.count[i],
--				    mqprio->qopt.offset[i]);
-+			mvneta_map_vlan_prio_to_rxq(pp, tc, rxq);
-+		}
-+	}
- 
- 	return 0;
- }
diff --git a/target/linux/mvebu/patches-5.10/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch b/target/linux/mvebu/patches-5.10/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch
deleted file mode 100644
index 15a0ce6b583e..000000000000
--- a/target/linux/mvebu/patches-5.10/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch
+++ /dev/null
@@ -1,182 +0,0 @@
-From 2551dc9e398c37a15e52122d385c29a8b06be45f Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Date: Fri, 26 Nov 2021 12:20:56 +0100
-Subject: net: mvneta: Add TC traffic shaping offload
-
-The mvneta controller is able to do some tocken-bucket per-queue traffic
-shaping. This commit adds support for setting these using the TC mqprio
-interface.
-
-The token-bucket parameters are customisable, but the current
-implementation configures them to have a 10kbps resolution for the
-rate limitation, since it allows to cover the whole range of max_rate
-values from 10kbps to 5Gbps with 10kbps increments.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 120 +++++++++++++++++++++++++++++++++-
- 1 file changed, 119 insertions(+), 1 deletion(-)
-
-(limited to 'drivers/net/ethernet/marvell/mvneta.c')
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -248,12 +248,39 @@
- #define      MVNETA_TXQ_SENT_DESC_MASK           0x3fff0000
- #define MVNETA_PORT_TX_RESET                     0x3cf0
- #define      MVNETA_PORT_TX_DMA_RESET            BIT(0)
-+#define MVNETA_TXQ_CMD1_REG			 0x3e00
-+#define      MVNETA_TXQ_CMD1_BW_LIM_SEL_V1	 BIT(3)
-+#define      MVNETA_TXQ_CMD1_BW_LIM_EN		 BIT(0)
-+#define MVNETA_REFILL_NUM_CLK_REG		 0x3e08
-+#define      MVNETA_REFILL_MAX_NUM_CLK		 0x0000ffff
- #define MVNETA_TX_MTU                            0x3e0c
- #define MVNETA_TX_TOKEN_SIZE                     0x3e14
- #define      MVNETA_TX_TOKEN_SIZE_MAX            0xffffffff
-+#define MVNETA_TXQ_BUCKET_REFILL_REG(q)		 (0x3e20 + ((q) << 2))
-+#define      MVNETA_TXQ_BUCKET_REFILL_PERIOD_MASK	0x3ff00000
-+#define      MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT	20
-+#define      MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX	 0x0007ffff
- #define MVNETA_TXQ_TOKEN_SIZE_REG(q)             (0x3e40 + ((q) << 2))
- #define      MVNETA_TXQ_TOKEN_SIZE_MAX           0x7fffffff
- 
-+/* The values of the bucket refill base period and refill period are taken from
-+ * the reference manual, and adds up to a base resolution of 10Kbps. This allows
-+ * to cover all rate-limit values from 10Kbps up to 5Gbps
-+ */
-+
-+/* Base period for the rate limit algorithm */
-+#define MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS	100
-+
-+/* Number of Base Period to wait between each bucket refill */
-+#define MVNETA_TXQ_BUCKET_REFILL_PERIOD	1000
-+
-+/* The base resolution for rate limiting, in bps. Any max_rate value should be
-+ * a multiple of that value.
-+ */
-+#define MVNETA_TXQ_RATE_LIMIT_RESOLUTION (NSEC_PER_SEC / \
-+					 (MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS * \
-+					  MVNETA_TXQ_BUCKET_REFILL_PERIOD))
-+
- #define MVNETA_LPI_CTRL_0                        0x2cc0
- #define MVNETA_LPI_CTRL_1                        0x2cc4
- #define      MVNETA_LPI_REQUEST_ENABLE           BIT(0)
-@@ -4931,11 +4958,74 @@ static void mvneta_map_vlan_prio_to_rxq(
- 	mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val);
- }
- 
-+static int mvneta_enable_per_queue_rate_limit(struct mvneta_port *pp)
-+{
-+	unsigned long core_clk_rate;
-+	u32 refill_cycles;
-+	u32 val;
-+
-+	core_clk_rate = clk_get_rate(pp->clk);
-+	if (!core_clk_rate)
-+		return -EINVAL;
-+
-+	refill_cycles = MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS /
-+			(NSEC_PER_SEC / core_clk_rate);
-+
-+	if (refill_cycles > MVNETA_REFILL_MAX_NUM_CLK)
-+		return -EINVAL;
-+
-+	/* Enable bw limit algorithm version 3 */
-+	val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG);
-+	val &= ~(MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN);
-+	mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val);
-+
-+	/* Set the base refill rate */
-+	mvreg_write(pp, MVNETA_REFILL_NUM_CLK_REG, refill_cycles);
-+
-+	return 0;
-+}
-+
-+static void mvneta_disable_per_queue_rate_limit(struct mvneta_port *pp)
-+{
-+	u32 val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG);
-+
-+	val |= (MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN);
-+	mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val);
-+}
-+
-+static int mvneta_setup_queue_rates(struct mvneta_port *pp, int queue,
-+				    u64 min_rate, u64 max_rate)
-+{
-+	u32 refill_val, rem;
-+	u32 val = 0;
-+
-+	/* Convert to from Bps to bps */
-+	max_rate *= 8;
-+
-+	if (min_rate)
-+		return -EINVAL;
-+
-+	refill_val = div_u64_rem(max_rate, MVNETA_TXQ_RATE_LIMIT_RESOLUTION,
-+				 &rem);
-+
-+	if (rem || !refill_val ||
-+	    refill_val > MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX)
-+		return -EINVAL;
-+
-+	val = refill_val;
-+	val |= (MVNETA_TXQ_BUCKET_REFILL_PERIOD <<
-+		MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT);
-+
-+	mvreg_write(pp, MVNETA_TXQ_BUCKET_REFILL_REG(queue), val);
-+
-+	return 0;
-+}
-+
- static int mvneta_setup_mqprio(struct net_device *dev,
- 			       struct tc_mqprio_qopt_offload *mqprio)
- {
- 	struct mvneta_port *pp = netdev_priv(dev);
--	int rxq, tc;
-+	int rxq, txq, tc, ret;
- 	u8 num_tc;
- 
- 	if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS)
-@@ -4949,6 +5039,7 @@ static int mvneta_setup_mqprio(struct ne
- 	mvneta_clear_rx_prio_map(pp);
- 
- 	if (!num_tc) {
-+		mvneta_disable_per_queue_rate_limit(pp);
- 		netdev_reset_tc(dev);
- 		return 0;
- 	}
-@@ -4969,6 +5060,33 @@ static int mvneta_setup_mqprio(struct ne
- 		}
- 	}
- 
-+	if (mqprio->shaper != TC_MQPRIO_SHAPER_BW_RATE) {
-+		mvneta_disable_per_queue_rate_limit(pp);
-+		return 0;
-+	}
-+
-+	if (mqprio->qopt.num_tc > txq_number)
-+		return -EINVAL;
-+
-+	ret = mvneta_enable_per_queue_rate_limit(pp);
-+	if (ret)
-+		return ret;
-+
-+	for (tc = 0; tc < mqprio->qopt.num_tc; tc++) {
-+		for (txq = mqprio->qopt.offset[tc];
-+		     txq < mqprio->qopt.count[tc] + mqprio->qopt.offset[tc];
-+		     txq++) {
-+			if (txq >= txq_number)
-+				return -EINVAL;
-+
-+			ret = mvneta_setup_queue_rates(pp, txq,
-+						       mqprio->min_rate[tc],
-+						       mqprio->max_rate[tc]);
-+			if (ret)
-+				return ret;
-+		}
-+	}
-+
- 	return 0;
- }
- 
diff --git a/target/linux/mvebu/patches-5.10/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch b/target/linux/mvebu/patches-5.10/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
deleted file mode 100644
index 29f36be460d2..000000000000
--- a/target/linux/mvebu/patches-5.10/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Sat, 3 Oct 2015 09:13:05 +0100
-Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states
-
-The cpuidle ->enter method expects the return value to be the sleep
-state we entered.  Returning negative numbers or other codes is not
-permissible since coupled CPU idle was merged.
-
-At least some of the mvebu_v7_cpu_suspend() implementations return the
-value from cpu_suspend(), which returns zero if the CPU vectors back
-into the kernel via cpu_resume() (the success case), or the non-zero
-return value of the suspend actor, or one (failure cases).
-
-We do not want to be returning the failure case value back to CPU idle
-as that indicates that we successfully entered one of the deeper idle
-states.  Always return zero instead, indicating that we slept for the
-shortest amount of time.
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/cpuidle/cpuidle-mvebu-v7.c
-+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
-@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp
- 	ret = mvebu_v7_cpu_suspend(deepidle);
- 	cpu_pm_exit();
- 
-+	/*
-+	 * If we failed to enter the desired state, indicate that we
-+	 * slept lightly.
-+	 */
- 	if (ret)
--		return ret;
-+		return 0;
- 
- 	return index;
- }
diff --git a/target/linux/mvebu/patches-5.10/801-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-5.10/801-pci-mvebu-time-out-reset-on-link-up.patch
deleted file mode 100644
index a5e49552e963..000000000000
--- a/target/linux/mvebu/patches-5.10/801-pci-mvebu-time-out-reset-on-link-up.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 9 Jul 2016 10:58:16 +0100
-Subject: pci: mvebu: time out reset on link up
-
-If the port reports that the link is up while we are resetting, there's
-little point in waiting for the full duration.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/pci/controller/pci-mvebu.c | 20 ++++++++++++++------
- 1 file changed, 14 insertions(+), 6 deletions(-)
-
---- a/drivers/pci/controller/pci-mvebu.c
-+++ b/drivers/pci/controller/pci-mvebu.c
-@@ -941,6 +941,7 @@ static int mvebu_pcie_powerup(struct mve
- 
- 	if (port->reset_gpio) {
- 		u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
-+		unsigned int i;
- 
- 		of_property_read_u32(port->dn, "reset-delay-us",
- 				     &reset_udelay);
-@@ -948,7 +949,13 @@ static int mvebu_pcie_powerup(struct mve
- 		udelay(100);
- 
- 		gpiod_set_value_cansleep(port->reset_gpio, 0);
--		msleep(reset_udelay / 1000);
-+		for (i = 0; i < reset_udelay; i += 1000) {
-+			if (mvebu_pcie_link_up(port))
-+				break;
-+			msleep(1);
-+		}
-+
-+		printk("%s: reset completed in %dus\n", port->name, i);
- 	}
- 
- 	return 0;
-@@ -1108,15 +1115,16 @@ static int mvebu_pcie_probe(struct platf
- 		if (!child)
- 			continue;
- 
--		ret = mvebu_pcie_powerup(port);
--		if (ret < 0)
--			continue;
--
- 		port->base = mvebu_pcie_map_registers(pdev, child, port);
- 		if (IS_ERR(port->base)) {
- 			dev_err(dev, "%s: cannot map registers\n", port->name);
- 			port->base = NULL;
--			mvebu_pcie_powerdown(port);
-+			continue;
-+		}
-+
-+		ret = mvebu_pcie_powerup(port);
-+		if (ret < 0) {
-+			port->base = NULL;
- 			continue;
- 		}
- 
diff --git a/target/linux/mvebu/patches-5.10/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch b/target/linux/mvebu/patches-5.10/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch
deleted file mode 100644
index 28b2b19499d5..000000000000
--- a/target/linux/mvebu/patches-5.10/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch
+++ /dev/null
@@ -1,218 +0,0 @@
-From aa4a0ccc41997f2da172165c92803abace43bd1c Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:32 +0000
-Subject: [PATCH 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803
- PUZZLE driver bindings
-
-Add the IEI WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED
-drivers. A new vendor prefix is also added accordingly for
-IEI Integration Corp.
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- .../hwmon/iei,wt61p803-puzzle-hwmon.yaml      | 53 ++++++++++++
- .../leds/iei,wt61p803-puzzle-leds.yaml        | 39 +++++++++
- .../bindings/mfd/iei,wt61p803-puzzle.yaml     | 82 +++++++++++++++++++
- .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
- 4 files changed, 176 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
- create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
- create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
-@@ -0,0 +1,53 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: IEI WT61P803 PUZZLE MCU HWMON module from IEI Integration Corp.
-+
-+maintainers:
-+  - Luka Kovacic <luka.kovacic@sartura.hr>
-+
-+description: |
-+  This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details
-+  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
-+
-+  The HWMON module is a sub-node of the MCU node in the Device Tree.
-+
-+properties:
-+  compatible:
-+    const: iei,wt61p803-puzzle-hwmon
-+
-+  "#address-cells":
-+    const: 1
-+
-+  "#size-cells":
-+    const: 0
-+
-+patternProperties:
-+  "^fan-group@[0-1]$":
-+    type: object
-+    properties:
-+      reg:
-+        minimum: 0
-+        maximum: 1
-+        description:
-+          Fan group ID
-+
-+      cooling-levels:
-+        minItems: 1
-+        maxItems: 255
-+        description:
-+          Cooling levels for the fans (PWM value mapping)
-+    description: |
-+      Properties for each fan group.
-+    required:
-+      - reg
-+
-+required:
-+  - compatible
-+  - "#address-cells"
-+  - "#size-cells"
-+
-+additionalProperties: false
---- /dev/null
-+++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
-@@ -0,0 +1,39 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: IEI WT61P803 PUZZLE MCU LED module from IEI Integration Corp.
-+
-+maintainers:
-+  - Luka Kovacic <luka.kovacic@sartura.hr>
-+
-+description: |
-+  This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details
-+  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
-+
-+  The LED module is a sub-node of the MCU node in the Device Tree.
-+
-+properties:
-+  compatible:
-+    const: iei,wt61p803-puzzle-leds
-+
-+  "#address-cells":
-+    const: 1
-+
-+  "#size-cells":
-+    const: 0
-+
-+  led@0:
-+    type: object
-+    $ref: common.yaml
-+    description: |
-+      Properties for a single LED.
-+
-+required:
-+  - compatible
-+  - "#address-cells"
-+  - "#size-cells"
-+
-+additionalProperties: false
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
-@@ -0,0 +1,82 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: IEI WT61P803 PUZZLE MCU from IEI Integration Corp.
-+
-+maintainers:
-+  - Luka Kovacic <luka.kovacic@sartura.hr>
-+
-+description: |
-+  IEI WT61P803 PUZZLE MCU is embedded in some IEI Puzzle series boards.
-+  It's used for controlling system power states, fans, LEDs and temperature
-+  sensors.
-+
-+  For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the
-+  binding documents under the respective subsystem directories.
-+
-+properties:
-+  compatible:
-+    const: iei,wt61p803-puzzle
-+
-+  current-speed:
-+    description:
-+      Serial bus speed in bps
-+    maxItems: 1
-+
-+  enable-beep: true
-+
-+  hwmon:
-+    $ref: /schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml
-+
-+  leds:
-+    $ref: /schemas/leds/iei,wt61p803-puzzle-leds.yaml
-+
-+required:
-+  - compatible
-+  - current-speed
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/leds/common.h>
-+    serial {
-+        mcu {
-+            compatible = "iei,wt61p803-puzzle";
-+            current-speed = <115200>;
-+            enable-beep;
-+
-+            leds {
-+                compatible = "iei,wt61p803-puzzle-leds";
-+                #address-cells = <1>;
-+                #size-cells = <0>;
-+
-+                led@0 {
-+                    reg = <0>;
-+                    function = LED_FUNCTION_POWER;
-+                    color = <LED_COLOR_ID_BLUE>;
-+                };
-+            };
-+
-+            hwmon {
-+                compatible = "iei,wt61p803-puzzle-hwmon";
-+                #address-cells = <1>;
-+                #size-cells = <0>;
-+
-+                fan-group@0 {
-+                    #cooling-cells = <2>;
-+                    reg = <0x00>;
-+                    cooling-levels = <64 102 170 230 250>;
-+                };
-+
-+                fan-group@1 {
-+                    #cooling-cells = <2>;
-+                    reg = <0x01>;
-+                    cooling-levels = <64 102 170 230 250>;
-+                };
-+            };
-+        };
-+    };
---- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
-+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
-@@ -475,6 +475,8 @@ patternProperties:
-     description: IC Plus Corp.
-   "^idt,.*":
-     description: Integrated Device Technologies, Inc.
-+  "^iei,.*":
-+    description: IEI Integration Corp.
-   "^ifi,.*":
-     description: Ingenieurburo Fur Ic-Technologie (I/F/I)
-   "^ilitek,.*":
diff --git a/target/linux/mvebu/patches-5.10/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch b/target/linux/mvebu/patches-5.10/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch
deleted file mode 100644
index 01c2ecce0d08..000000000000
--- a/target/linux/mvebu/patches-5.10/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch
+++ /dev/null
@@ -1,1034 +0,0 @@
-From 692cfa85272dd12995b427c0a7a585ced5d54f32 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:33 +0000
-Subject: [PATCH 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU
-
-Add a driver for the IEI WT61P803 PUZZLE microcontroller, used in some
-IEI Puzzle series devices. The microcontroller controls system power,
-temperature sensors, fans and LEDs.
-
-This driver implements the core functionality for device communication
-over the system serial (serdev bus). It handles MCU messages and the
-internal MCU properties. Some properties can be managed over sysfs.
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- drivers/mfd/Kconfig                     |   8 +
- drivers/mfd/Makefile                    |   1 +
- drivers/mfd/iei-wt61p803-puzzle.c       | 908 ++++++++++++++++++++++++
- include/linux/mfd/iei-wt61p803-puzzle.h |  66 ++
- 4 files changed, 983 insertions(+)
- create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c
- create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h
-
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -2155,6 +2155,15 @@ config SGI_MFD_IOC3
- 	  If you have an SGI Origin, Octane, or a PCI IOC3 card,
- 	  then say Y. Otherwise say N.
- 
-+config MFD_IEI_WT61P803_PUZZLE
-+	tristate "IEI WT61P803 PUZZLE MCU driver"
-+	depends on SERIAL_DEV_BUS
-+	select MFD_CORE
-+	help
-+	  IEI WT61P803 PUZZLE is a system power management microcontroller
-+	  used for fan control, temperature sensor reading, LED control
-+	  and system identification.
-+
- config MFD_INTEL_M10_BMC
- 	tristate "Intel MAX 10 Board Management Controller"
- 	depends on SPI_MASTER
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -237,6 +237,7 @@ obj-$(CONFIG_MFD_HI655X_PMIC)   += hi655
- obj-$(CONFIG_MFD_DLN2)		+= dln2.o
- obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
- obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o
-+obj-$(CONFIG_MFD_IEI_WT61P803_PUZZLE)	+= iei-wt61p803-puzzle.o
- 
- intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
- obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
---- /dev/null
-+++ b/drivers/mfd/iei-wt61p803-puzzle.c
-@@ -0,0 +1,908 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* IEI WT61P803 PUZZLE MCU Driver
-+ * System management microcontroller for fan control, temperature sensor reading,
-+ * LED control and system identification on IEI Puzzle series ARM-based appliances.
-+ *
-+ * Copyright (C) 2020 Sartura Ltd.
-+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
-+ */
-+
-+#include <linux/atomic.h>
-+#include <linux/delay.h>
-+#include <linux/export.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/mfd/core.h>
-+#include <linux/mfd/iei-wt61p803-puzzle.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/property.h>
-+#include <linux/sched.h>
-+#include <linux/serdev.h>
-+#include <linux/slab.h>
-+#include <linux/sysfs.h>
-+#include <asm/unaligned.h>
-+
-+/* start, payload and XOR checksum at end */
-+#define IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH	(1 + 20 + 1)
-+#define IEI_WT61P803_PUZZLE_RESP_BUF_SIZE	512
-+
-+#define IEI_WT61P803_PUZZLE_MAC_LENGTH			17
-+#define IEI_WT61P803_PUZZLE_SN_LENGTH			36
-+#define IEI_WT61P803_PUZZLE_VERSION_LENGTH		 6
-+#define IEI_WT61P803_PUZZLE_BUILD_INFO_LENGTH		16
-+#define IEI_WT61P803_PUZZLE_PROTOCOL_VERSION_LENGTH	 8
-+#define IEI_WT61P803_PUZZLE_NB_MAC			 8
-+
-+/* Use HZ as a timeout value throughout the driver */
-+#define IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT HZ
-+
-+enum iei_wt61p803_puzzle_attribute_type {
-+	IEI_WT61P803_PUZZLE_VERSION,
-+	IEI_WT61P803_PUZZLE_BUILD_INFO,
-+	IEI_WT61P803_PUZZLE_BOOTLOADER_MODE,
-+	IEI_WT61P803_PUZZLE_PROTOCOL_VERSION,
-+	IEI_WT61P803_PUZZLE_SERIAL_NUMBER,
-+	IEI_WT61P803_PUZZLE_MAC_ADDRESS,
-+	IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS,
-+	IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY,
-+	IEI_WT61P803_PUZZLE_POWER_STATUS,
-+};
-+
-+struct iei_wt61p803_puzzle_device_attribute {
-+	struct device_attribute dev_attr;
-+	enum iei_wt61p803_puzzle_attribute_type type;
-+	u8 index;
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_mcu_status - MCU flags state
-+ * @ac_recovery_status_flag:	AC Recovery Status Flag
-+ * @power_loss_recovery:	System recovery after power loss
-+ * @power_status:		System Power-on Method
-+ */
-+struct iei_wt61p803_puzzle_mcu_status {
-+	u8 ac_recovery_status_flag;
-+	u8 power_loss_recovery;
-+	u8 power_status;
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_reply - MCU reply
-+ * @size:	Size of the MCU reply
-+ * @data:	Full MCU reply buffer
-+ * @state:	Current state of the packet
-+ * @received:	Was the response fullfilled
-+ */
-+struct iei_wt61p803_puzzle_reply {
-+	size_t size;
-+	unsigned char data[IEI_WT61P803_PUZZLE_RESP_BUF_SIZE];
-+	struct completion received;
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_mcu_version - MCU version status
-+ * @version:		Primary firmware version
-+ * @build_info:		Build date and time
-+ * @bootloader_mode:	Status of the MCU operation
-+ * @protocol_version:	MCU communication protocol version
-+ * @serial_number:	Device factory serial number
-+ * @mac_address:	Device factory MAC addresses
-+ *
-+ * Last element of arrays is reserved for '\0'.
-+ */
-+struct iei_wt61p803_puzzle_mcu_version {
-+	char version[IEI_WT61P803_PUZZLE_VERSION_LENGTH + 1];
-+	char build_info[IEI_WT61P803_PUZZLE_BUILD_INFO_LENGTH + 1];
-+	bool bootloader_mode;
-+	char protocol_version[IEI_WT61P803_PUZZLE_PROTOCOL_VERSION_LENGTH + 1];
-+	char serial_number[IEI_WT61P803_PUZZLE_SN_LENGTH + 1];
-+	char mac_address[IEI_WT61P803_PUZZLE_NB_MAC][IEI_WT61P803_PUZZLE_MAC_LENGTH + 1];
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle - IEI WT61P803 PUZZLE MCU Driver
-+ * @serdev:		Pointer to underlying serdev device
-+ * @dev:		Pointer to underlying dev device
-+ * @reply_lock:		Reply mutex lock
-+ * @reply:		Pointer to the iei_wt61p803_puzzle_reply struct
-+ * @version:		MCU version related data
-+ * @status:		MCU status related data
-+ * @response_buffer	Command response buffer allocation
-+ * @lock		General member mutex lock
-+ */
-+struct iei_wt61p803_puzzle {
-+	struct serdev_device *serdev;
-+	struct device *dev;
-+	struct mutex reply_lock; /* lock to prevent multiple firmware calls */
-+	struct iei_wt61p803_puzzle_reply *reply;
-+	struct iei_wt61p803_puzzle_mcu_version version;
-+	struct iei_wt61p803_puzzle_mcu_status status;
-+	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
-+	struct mutex lock; /* lock to protect response buffer */
-+};
-+
-+static unsigned char iei_wt61p803_puzzle_checksum(unsigned char *buf, size_t len)
-+{
-+	unsigned char checksum = 0;
-+	size_t i;
-+
-+	for (i = 0; i < len; i++)
-+		checksum ^= buf[i];
-+	return checksum;
-+}
-+
-+static int iei_wt61p803_puzzle_process_resp(struct iei_wt61p803_puzzle *mcu,
-+					    const unsigned char *raw_resp_data, size_t size)
-+{
-+	unsigned char checksum;
-+
-+	/* Check the incoming frame header */
-+	if (!(raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START ||
-+	      raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER ||
-+	     (raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM &&
-+	      raw_resp_data[1] == IEI_WT61P803_PUZZLE_CMD_EEPROM_READ))) {
-+		if (mcu->reply->size + size >= sizeof(mcu->reply->data))
-+			return -EIO;
-+
-+		/* Append the frame to existing data */
-+		memcpy(mcu->reply->data + mcu->reply->size, raw_resp_data, size);
-+		mcu->reply->size += size;
-+	} else {
-+		if (size >= sizeof(mcu->reply->data))
-+			return -EIO;
-+
-+		/* Start processing a new frame */
-+		memcpy(mcu->reply->data, raw_resp_data, size);
-+		mcu->reply->size = size;
-+	}
-+
-+	checksum = iei_wt61p803_puzzle_checksum(mcu->reply->data, mcu->reply->size - 1);
-+	if (checksum != mcu->reply->data[mcu->reply->size - 1]) {
-+		/* The checksum isn't matched yet, wait for new frames */
-+		return size;
-+	}
-+
-+	/* Received all the data */
-+	complete(&mcu->reply->received);
-+
-+	return size;
-+}
-+
-+static int iei_wt61p803_puzzle_recv_buf(struct serdev_device *serdev,
-+					const unsigned char *data, size_t size)
-+{
-+	struct iei_wt61p803_puzzle *mcu = serdev_device_get_drvdata(serdev);
-+	int ret;
-+
-+	ret = iei_wt61p803_puzzle_process_resp(mcu, data, size);
-+	/* Return the number of processed bytes if function returns error,
-+	 * discard the remaining incoming data, since the frame this data
-+	 * belongs to is broken anyway
-+	 */
-+	if (ret < 0)
-+		return size;
-+
-+	return ret;
-+}
-+
-+static const struct serdev_device_ops iei_wt61p803_puzzle_serdev_device_ops = {
-+	.receive_buf  = iei_wt61p803_puzzle_recv_buf,
-+	.write_wakeup = serdev_device_write_wakeup,
-+};
-+
-+/**
-+ * iei_wt61p803_puzzle_write_command_watchdog() - Watchdog of the normal cmd
-+ * @mcu: Pointer to the iei_wt61p803_puzzle core MFD struct
-+ * @cmd: Pointer to the char array to send (size should be content + 1 (xor))
-+ * @size: Size of the cmd char array
-+ * @reply_data: Pointer to the reply/response data array (should be allocated)
-+ * @reply_size: Pointer to size_t (size of reply_data)
-+ * @retry_count: Number of times to retry sending the command to the MCU
-+ */
-+int iei_wt61p803_puzzle_write_command_watchdog(struct iei_wt61p803_puzzle *mcu,
-+					       unsigned char *cmd, size_t size,
-+					       unsigned char *reply_data,
-+					       size_t *reply_size, int retry_count)
-+{
-+	struct device *dev = &mcu->serdev->dev;
-+	int ret, i;
-+
-+	for (i = 0; i < retry_count; i++) {
-+		ret = iei_wt61p803_puzzle_write_command(mcu, cmd, size,
-+							reply_data, reply_size);
-+		if (ret != -ETIMEDOUT)
-+			return ret;
-+	}
-+
-+	dev_err(dev, "Command response timed out. Retries: %d\n", retry_count);
-+
-+	return -ETIMEDOUT;
-+}
-+EXPORT_SYMBOL_GPL(iei_wt61p803_puzzle_write_command_watchdog);
-+
-+/**
-+ * iei_wt61p803_puzzle_write_command() - Send a structured command to the MCU
-+ * @mcu: Pointer to the iei_wt61p803_puzzle core MFD struct
-+ * @cmd: Pointer to the char array to send (size should be content + 1 (xor))
-+ * @size: Size of the cmd char array
-+ * @reply_data: Pointer to the reply/response data array (should be allocated)
-+ *
-+ * Sends a structured command to the MCU.
-+ */
-+int iei_wt61p803_puzzle_write_command(struct iei_wt61p803_puzzle *mcu,
-+				      unsigned char *cmd, size_t size,
-+				      unsigned char *reply_data,
-+				      size_t *reply_size)
-+{
-+	struct device *dev = &mcu->serdev->dev;
-+	int ret;
-+
-+	if (size <= 1 || size > IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH)
-+		return -EINVAL;
-+
-+	mutex_lock(&mcu->reply_lock);
-+
-+	cmd[size - 1] = iei_wt61p803_puzzle_checksum(cmd, size - 1);
-+
-+	/* Initialize reply struct */
-+	reinit_completion(&mcu->reply->received);
-+	mcu->reply->size = 0;
-+	usleep_range(2000, 10000);
-+	serdev_device_write_flush(mcu->serdev);
-+	ret = serdev_device_write_buf(mcu->serdev, cmd, size);
-+	if (ret < 0)
-+		goto exit;
-+
-+	serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-+	ret = wait_for_completion_timeout(&mcu->reply->received,
-+					  IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-+	if (ret == 0) {
-+		dev_err(dev, "Command reply receive timeout\n");
-+		ret = -ETIMEDOUT;
-+		goto exit;
-+	}
-+
-+	*reply_size = mcu->reply->size;
-+	/* Copy the received data, as it will not be available after a new frame is received */
-+	memcpy(reply_data, mcu->reply->data, mcu->reply->size);
-+	ret = 0;
-+exit:
-+	mutex_unlock(&mcu->reply_lock);
-+	return ret;
-+}
-+EXPORT_SYMBOL_GPL(iei_wt61p803_puzzle_write_command);
-+
-+static int iei_wt61p803_puzzle_buzzer(struct iei_wt61p803_puzzle *mcu, bool long_beep)
-+{
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	unsigned char buzzer_cmd[4] = {};
-+	size_t reply_size;
-+	int ret;
-+
-+	buzzer_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	buzzer_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE;
-+	buzzer_cmd[2] = long_beep ? '3' : '2'; /* Buzzer 1.5 / 0.5 second beep */
-+
-+	mutex_lock(&mcu->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu, buzzer_cmd, sizeof(buzzer_cmd),
-+						resp_buf, &reply_size);
-+	if (ret)
-+		goto exit;
-+
-+	if (reply_size != 3) {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+
-+	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
-+		ret = -EPROTO;
-+		goto exit;
-+	}
-+exit:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_get_version(struct iei_wt61p803_puzzle *mcu)
-+{
-+	unsigned char version_cmd[3] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
-+		IEI_WT61P803_PUZZLE_CMD_OTHER_VERSION,
-+	};
-+	unsigned char build_info_cmd[3] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
-+		IEI_WT61P803_PUZZLE_CMD_OTHER_BUILD,
-+	};
-+	unsigned char bootloader_mode_cmd[3] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
-+		IEI_WT61P803_PUZZLE_CMD_OTHER_BOOTLOADER_MODE,
-+	};
-+	unsigned char protocol_version_cmd[3] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
-+		IEI_WT61P803_PUZZLE_CMD_OTHER_PROTOCOL_VERSION,
-+	};
-+	unsigned char *rb = mcu->response_buffer;
-+	size_t reply_size;
-+	int ret;
-+
-+	mutex_lock(&mcu->lock);
-+
-+	ret = iei_wt61p803_puzzle_write_command(mcu, version_cmd, sizeof(version_cmd),
-+						rb, &reply_size);
-+	if (ret)
-+		goto err;
-+	if (reply_size < 7) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+	sprintf(mcu->version.version, "v%c.%.3s", rb[2], &rb[3]);
-+
-+	ret = iei_wt61p803_puzzle_write_command(mcu, build_info_cmd,
-+						sizeof(build_info_cmd),	rb,
-+						&reply_size);
-+	if (ret)
-+		goto err;
-+	if (reply_size < 15) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+	sprintf(mcu->version.build_info, "%c%c/%c%c/%.4s %c%c:%c%c",
-+		rb[8], rb[9], rb[6], rb[7], &rb[2], rb[10], rb[11],
-+		rb[12], rb[13]);
-+
-+	ret = iei_wt61p803_puzzle_write_command(mcu, bootloader_mode_cmd,
-+						sizeof(bootloader_mode_cmd), rb,
-+						&reply_size);
-+	if (ret)
-+		goto err;
-+	if (reply_size < 4) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+	if (rb[2] == IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_APPS)
-+		mcu->version.bootloader_mode = false;
-+	else if (rb[2] == IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_BOOTLOADER)
-+		mcu->version.bootloader_mode = true;
-+
-+	ret = iei_wt61p803_puzzle_write_command(mcu, protocol_version_cmd,
-+						sizeof(protocol_version_cmd), rb,
-+						&reply_size);
-+	if (ret)
-+		goto err;
-+	if (reply_size < 9) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+	sprintf(mcu->version.protocol_version, "v%c.%c%c%c%c%c",
-+		rb[7], rb[6], rb[5], rb[4], rb[3], rb[2]);
-+err:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_get_mcu_status(struct iei_wt61p803_puzzle *mcu)
-+{
-+	unsigned char mcu_status_cmd[5] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_START,
-+		IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER,
-+		IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS,
-+		IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS,
-+	};
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	size_t reply_size;
-+	int ret;
-+
-+	mutex_lock(&mcu->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu, mcu_status_cmd, sizeof(mcu_status_cmd),
-+						resp_buf, &reply_size);
-+	if (ret)
-+		goto exit;
-+	if (reply_size < 20) {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+
-+	/* Response format:
-+	 * (IDX	RESPONSE)
-+	 * 0	@
-+	 * 1	O
-+	 * 2	S
-+	 * 3	S
-+	 * ...
-+	 * 5	AC Recovery Status Flag
-+	 * ...
-+	 * 10	Power Loss Recovery
-+	 * ...
-+	 * 19	Power Status (system power on method)
-+	 * 20	XOR checksum
-+	 */
-+	if (resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+	    resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER &&
-+	    resp_buf[2] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS &&
-+	    resp_buf[3] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS) {
-+		mcu->status.ac_recovery_status_flag = resp_buf[5];
-+		mcu->status.power_loss_recovery = resp_buf[10];
-+		mcu->status.power_status = resp_buf[19];
-+	}
-+exit:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_get_serial_number(struct iei_wt61p803_puzzle *mcu)
-+{
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	unsigned char serial_number_cmd[5] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
-+		IEI_WT61P803_PUZZLE_CMD_EEPROM_READ,
-+		0x00,	/* EEPROM read address */
-+		0x24,	/* Data length */
-+	};
-+	size_t reply_size;
-+	int ret;
-+
-+	mutex_lock(&mcu->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu, serial_number_cmd,
-+						sizeof(serial_number_cmd),
-+						resp_buf, &reply_size);
-+	if (ret)
-+		goto err;
-+
-+	if (reply_size < IEI_WT61P803_PUZZLE_SN_LENGTH + 4) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+
-+	sprintf(mcu->version.serial_number, "%.*s",
-+		IEI_WT61P803_PUZZLE_SN_LENGTH, resp_buf + 4);
-+err:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_write_serial_number(struct iei_wt61p803_puzzle *mcu,
-+						   unsigned char serial_number[36])
-+{
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	unsigned char serial_number_header[4] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
-+		IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE,
-+		0x00,	/* EEPROM write address */
-+		0xC,	/* Data length */
-+	};
-+	unsigned char serial_number_cmd[4 + 12 + 1]; /* header, serial number, XOR checksum */
-+	int ret, sn_counter;
-+	size_t reply_size;
-+
-+	/* The MCU can only handle 22 byte messages, send the S/N in 12 byte chunks */
-+	mutex_lock(&mcu->lock);
-+	for (sn_counter = 0; sn_counter < 3; sn_counter++) {
-+		serial_number_header[2] = 0x0 + 0xC * sn_counter;
-+
-+		memcpy(serial_number_cmd, serial_number_header, sizeof(serial_number_header));
-+		memcpy(serial_number_cmd + sizeof(serial_number_header),
-+		       serial_number + 0xC * sn_counter, 0xC);
-+
-+		ret = iei_wt61p803_puzzle_write_command(mcu, serial_number_cmd,
-+							sizeof(serial_number_cmd),
-+							resp_buf, &reply_size);
-+		if (ret)
-+			goto err;
-+		if (reply_size != 3) {
-+			ret = -EIO;
-+			goto err;
-+		}
-+		if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+		      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+		      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
-+			ret = -EPROTO;
-+			goto err;
-+		}
-+	}
-+
-+	sprintf(mcu->version.serial_number, "%.*s",
-+		IEI_WT61P803_PUZZLE_SN_LENGTH, serial_number);
-+err:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_get_mac_address(struct iei_wt61p803_puzzle *mcu, int index)
-+{
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	unsigned char mac_address_cmd[5] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
-+		IEI_WT61P803_PUZZLE_CMD_EEPROM_READ,
-+		0x00,	/* EEPROM read address */
-+		0x11,	/* Data length */
-+	};
-+	size_t reply_size;
-+	int ret;
-+
-+	mutex_lock(&mcu->lock);
-+	mac_address_cmd[2] = 0x24 + 0x11 * index;
-+
-+	ret = iei_wt61p803_puzzle_write_command(mcu, mac_address_cmd,
-+						sizeof(mac_address_cmd),
-+						resp_buf, &reply_size);
-+	if (ret)
-+		goto err;
-+
-+	if (reply_size < 22) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+
-+	sprintf(mcu->version.mac_address[index], "%.*s",
-+		IEI_WT61P803_PUZZLE_MAC_LENGTH, resp_buf + 4);
-+err:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int
-+iei_wt61p803_puzzle_write_mac_address(struct iei_wt61p803_puzzle *mcu,
-+				      unsigned char mac_address[IEI_WT61P803_PUZZLE_MAC_LENGTH],
-+				      int mac_address_idx)
-+{
-+	unsigned char mac_address_cmd[4 + IEI_WT61P803_PUZZLE_MAC_LENGTH + 1];
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	unsigned char mac_address_header[4] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
-+		IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE,
-+		0x00,	/* EEPROM write address */
-+		0x11,	/* Data length */
-+	};
-+	size_t reply_size;
-+	int ret;
-+
-+	if (mac_address_idx < 0 || mac_address_idx >= IEI_WT61P803_PUZZLE_NB_MAC)
-+		return -EINVAL;
-+
-+	mac_address_header[2] = 0x24 + 0x11 * mac_address_idx;
-+
-+	/* Concat mac_address_header, mac_address to mac_address_cmd */
-+	memcpy(mac_address_cmd, mac_address_header, sizeof(mac_address_header));
-+	memcpy(mac_address_cmd + sizeof(mac_address_header), mac_address,
-+	       IEI_WT61P803_PUZZLE_MAC_LENGTH);
-+
-+	mutex_lock(&mcu->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu, mac_address_cmd,
-+						sizeof(mac_address_cmd),
-+						resp_buf, &reply_size);
-+	if (ret)
-+		goto err;
-+	if (reply_size != 3) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
-+		ret = -EPROTO;
-+		goto err;
-+	}
-+
-+	sprintf(mcu->version.mac_address[mac_address_idx], "%.*s",
-+		IEI_WT61P803_PUZZLE_MAC_LENGTH, mac_address);
-+err:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_write_power_loss_recovery(struct iei_wt61p803_puzzle *mcu,
-+							 int power_loss_recovery_action)
-+{
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	unsigned char power_loss_recovery_cmd[5] = {};
-+	size_t reply_size;
-+	int ret;
-+
-+	if (power_loss_recovery_action < 0 || power_loss_recovery_action > 4)
-+		return -EINVAL;
-+
-+	power_loss_recovery_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	power_loss_recovery_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER;
-+	power_loss_recovery_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS;
-+	power_loss_recovery_cmd[3] = hex_asc[power_loss_recovery_action];
-+
-+	mutex_lock(&mcu->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu, power_loss_recovery_cmd,
-+						sizeof(power_loss_recovery_cmd),
-+						resp_buf, &reply_size);
-+	if (ret)
-+		goto exit;
-+	mcu->status.power_loss_recovery = power_loss_recovery_action;
-+exit:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+#define to_puzzle_dev_attr(_attr) \
-+	container_of(_attr, struct iei_wt61p803_puzzle_device_attribute, dev_attr)
-+
-+static ssize_t show_output(struct device *dev,
-+			   struct device_attribute *attr, char *buf)
-+{
-+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
-+	struct iei_wt61p803_puzzle_device_attribute *pattr = to_puzzle_dev_attr(attr);
-+	int ret;
-+
-+	switch (pattr->type) {
-+	case IEI_WT61P803_PUZZLE_VERSION:
-+		return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.version);
-+	case IEI_WT61P803_PUZZLE_BUILD_INFO:
-+		return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.build_info);
-+	case IEI_WT61P803_PUZZLE_BOOTLOADER_MODE:
-+		return scnprintf(buf, PAGE_SIZE, "%d\n", mcu->version.bootloader_mode);
-+	case IEI_WT61P803_PUZZLE_PROTOCOL_VERSION:
-+		return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.protocol_version);
-+	case IEI_WT61P803_PUZZLE_SERIAL_NUMBER:
-+		ret = iei_wt61p803_puzzle_get_serial_number(mcu);
-+		if (!ret)
-+			ret = scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.serial_number);
-+		else
-+			ret = 0;
-+		return ret;
-+	case IEI_WT61P803_PUZZLE_MAC_ADDRESS:
-+		ret = iei_wt61p803_puzzle_get_mac_address(mcu, pattr->index);
-+		if (!ret)
-+			ret = scnprintf(buf, PAGE_SIZE, "%s\n",
-+					mcu->version.mac_address[pattr->index]);
-+		else
-+			ret = 0;
-+		return ret;
-+	case IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS:
-+	case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
-+	case IEI_WT61P803_PUZZLE_POWER_STATUS:
-+		ret = iei_wt61p803_puzzle_get_mcu_status(mcu);
-+		if (ret)
-+			return ret;
-+
-+		mutex_lock(&mcu->lock);
-+		switch (pattr->type) {
-+		case IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS:
-+			ret = scnprintf(buf, PAGE_SIZE, "%x\n",
-+					mcu->status.ac_recovery_status_flag);
-+			break;
-+		case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
-+			ret = scnprintf(buf, PAGE_SIZE, "%x\n", mcu->status.power_loss_recovery);
-+			break;
-+		case IEI_WT61P803_PUZZLE_POWER_STATUS:
-+			ret = scnprintf(buf, PAGE_SIZE, "%x\n", mcu->status.power_status);
-+			break;
-+		default:
-+			ret = 0;
-+			break;
-+		}
-+		mutex_unlock(&mcu->lock);
-+		return ret;
-+	default:
-+		return 0;
-+	}
-+
-+	return 0;
-+}
-+
-+static ssize_t store_output(struct device *dev,
-+			    struct device_attribute *attr,
-+			    const char *buf, size_t len)
-+{
-+	unsigned char serial_number[IEI_WT61P803_PUZZLE_SN_LENGTH];
-+	unsigned char mac_address[IEI_WT61P803_PUZZLE_MAC_LENGTH];
-+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
-+	struct iei_wt61p803_puzzle_device_attribute *pattr = to_puzzle_dev_attr(attr);
-+	int power_loss_recovery_action = 0;
-+	int ret;
-+
-+	switch (pattr->type) {
-+	case IEI_WT61P803_PUZZLE_SERIAL_NUMBER:
-+		if (len != (size_t)(IEI_WT61P803_PUZZLE_SN_LENGTH + 1))
-+			return -EINVAL;
-+		memcpy(serial_number, buf, sizeof(serial_number));
-+		ret = iei_wt61p803_puzzle_write_serial_number(mcu, serial_number);
-+		if (ret)
-+			return ret;
-+		return len;
-+	case IEI_WT61P803_PUZZLE_MAC_ADDRESS:
-+		if (len != (size_t)(IEI_WT61P803_PUZZLE_MAC_LENGTH + 1))
-+			return -EINVAL;
-+
-+		memcpy(mac_address, buf, sizeof(mac_address));
-+
-+		if (strlen(attr->attr.name) != 13)
-+			return -EIO;
-+
-+		ret = iei_wt61p803_puzzle_write_mac_address(mcu, mac_address, pattr->index);
-+		if (ret)
-+			return ret;
-+		return len;
-+	case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
-+		ret = kstrtoint(buf, 10, &power_loss_recovery_action);
-+		if (ret)
-+			return ret;
-+		ret = iei_wt61p803_puzzle_write_power_loss_recovery(mcu,
-+								    power_loss_recovery_action);
-+		if (ret)
-+			return ret;
-+		return len;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+#define IEI_WT61P803_PUZZLE_ATTR(_name, _mode, _show, _store, _type, _index) \
-+	struct iei_wt61p803_puzzle_device_attribute dev_attr_##_name = \
-+		{ .dev_attr	= __ATTR(_name, _mode, _show, _store), \
-+		  .type		= _type, \
-+		  .index	= _index }
-+
-+#define IEI_WT61P803_PUZZLE_ATTR_RO(_name, _type, _id) \
-+	IEI_WT61P803_PUZZLE_ATTR(_name, 0444, show_output, NULL, _type, _id)
-+
-+#define IEI_WT61P803_PUZZLE_ATTR_RW(_name, _type, _id) \
-+	IEI_WT61P803_PUZZLE_ATTR(_name, 0644, show_output, store_output, _type, _id)
-+
-+static IEI_WT61P803_PUZZLE_ATTR_RO(version, IEI_WT61P803_PUZZLE_VERSION, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(build_info, IEI_WT61P803_PUZZLE_BUILD_INFO, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(bootloader_mode, IEI_WT61P803_PUZZLE_BOOTLOADER_MODE, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(protocol_version, IEI_WT61P803_PUZZLE_PROTOCOL_VERSION, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(serial_number, IEI_WT61P803_PUZZLE_SERIAL_NUMBER, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_0, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_1, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 1);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_2, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 2);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_3, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 3);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_4, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 4);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_5, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 5);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_6, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 6);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_7, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 7);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(ac_recovery_status, IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(power_loss_recovery, IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(power_status, IEI_WT61P803_PUZZLE_POWER_STATUS, 0);
-+
-+static struct attribute *iei_wt61p803_puzzle_attrs[] = {
-+	&dev_attr_version.dev_attr.attr,
-+	&dev_attr_build_info.dev_attr.attr,
-+	&dev_attr_bootloader_mode.dev_attr.attr,
-+	&dev_attr_protocol_version.dev_attr.attr,
-+	&dev_attr_serial_number.dev_attr.attr,
-+	&dev_attr_mac_address_0.dev_attr.attr,
-+	&dev_attr_mac_address_1.dev_attr.attr,
-+	&dev_attr_mac_address_2.dev_attr.attr,
-+	&dev_attr_mac_address_3.dev_attr.attr,
-+	&dev_attr_mac_address_4.dev_attr.attr,
-+	&dev_attr_mac_address_5.dev_attr.attr,
-+	&dev_attr_mac_address_6.dev_attr.attr,
-+	&dev_attr_mac_address_7.dev_attr.attr,
-+	&dev_attr_ac_recovery_status.dev_attr.attr,
-+	&dev_attr_power_loss_recovery.dev_attr.attr,
-+	&dev_attr_power_status.dev_attr.attr,
-+	NULL
-+};
-+ATTRIBUTE_GROUPS(iei_wt61p803_puzzle);
-+
-+static int iei_wt61p803_puzzle_sysfs_create(struct device *dev,
-+					    struct iei_wt61p803_puzzle *mcu)
-+{
-+	int ret;
-+
-+	ret = sysfs_create_groups(&mcu->dev->kobj, iei_wt61p803_puzzle_groups);
-+	if (ret)
-+		mfd_remove_devices(mcu->dev);
-+
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_sysfs_remove(struct device *dev,
-+					    struct iei_wt61p803_puzzle *mcu)
-+{
-+	/* Remove sysfs groups */
-+	sysfs_remove_groups(&mcu->dev->kobj, iei_wt61p803_puzzle_groups);
-+	mfd_remove_devices(mcu->dev);
-+
-+	return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_probe(struct serdev_device *serdev)
-+{
-+	struct device *dev = &serdev->dev;
-+	struct iei_wt61p803_puzzle *mcu;
-+	u32 baud;
-+	int ret;
-+
-+	/* Read the baud rate from 'current-speed', because the MCU supports different rates */
-+	if (device_property_read_u32(dev, "current-speed", &baud)) {
-+		dev_err(dev,
-+			"'current-speed' is not specified in device node\n");
-+		return -EINVAL;
-+	}
-+	dev_dbg(dev, "Driver baud rate: %d\n", baud);
-+
-+	/* Allocate the memory */
-+	mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL);
-+	if (!mcu)
-+		return -ENOMEM;
-+
-+	mcu->reply = devm_kzalloc(dev, sizeof(*mcu->reply), GFP_KERNEL);
-+	if (!mcu->reply)
-+		return -ENOMEM;
-+
-+	/* Initialize device struct data */
-+	mcu->serdev = serdev;
-+	mcu->dev = dev;
-+	init_completion(&mcu->reply->received);
-+	mutex_init(&mcu->reply_lock);
-+	mutex_init(&mcu->lock);
-+
-+	/* Setup UART interface */
-+	serdev_device_set_drvdata(serdev, mcu);
-+	serdev_device_set_client_ops(serdev, &iei_wt61p803_puzzle_serdev_device_ops);
-+	ret = devm_serdev_device_open(dev, serdev);
-+	if (ret)
-+		return ret;
-+	serdev_device_set_baudrate(serdev, baud);
-+	serdev_device_set_flow_control(serdev, false);
-+	ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
-+	if (ret) {
-+		dev_err(dev, "Failed to set parity\n");
-+		return ret;
-+	}
-+
-+	ret = iei_wt61p803_puzzle_get_version(mcu);
-+	if (ret)
-+		return ret;
-+
-+	dev_dbg(dev, "MCU version: %s\n", mcu->version.version);
-+	dev_dbg(dev, "MCU firmware build info: %s\n", mcu->version.build_info);
-+	dev_dbg(dev, "MCU in bootloader mode: %s\n",
-+		mcu->version.bootloader_mode ? "true" : "false");
-+	dev_dbg(dev, "MCU protocol version: %s\n", mcu->version.protocol_version);
-+
-+	if (device_property_read_bool(dev, "enable-beep")) {
-+		ret = iei_wt61p803_puzzle_buzzer(mcu, false);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	ret = iei_wt61p803_puzzle_sysfs_create(dev, mcu);
-+	if (ret)
-+		return ret;
-+
-+	return devm_of_platform_populate(dev);
-+}
-+
-+static void iei_wt61p803_puzzle_remove(struct serdev_device *serdev)
-+{
-+	struct device *dev = &serdev->dev;
-+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
-+
-+	iei_wt61p803_puzzle_sysfs_remove(dev, mcu);
-+}
-+
-+static const struct of_device_id iei_wt61p803_puzzle_dt_ids[] = {
-+	{ .compatible = "iei,wt61p803-puzzle" },
-+	{ }
-+};
-+
-+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_dt_ids);
-+
-+static struct serdev_device_driver iei_wt61p803_puzzle_drv = {
-+	.probe			= iei_wt61p803_puzzle_probe,
-+	.remove			= iei_wt61p803_puzzle_remove,
-+	.driver = {
-+		.name		= "iei-wt61p803-puzzle",
-+		.of_match_table	= iei_wt61p803_puzzle_dt_ids,
-+	},
-+};
-+
-+module_serdev_device_driver(iei_wt61p803_puzzle_drv);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>");
-+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU Driver");
---- /dev/null
-+++ b/include/linux/mfd/iei-wt61p803-puzzle.h
-@@ -0,0 +1,66 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/* IEI WT61P803 PUZZLE MCU Driver
-+ * System management microcontroller for fan control, temperature sensor reading,
-+ * LED control and system identification on IEI Puzzle series ARM-based appliances.
-+ *
-+ * Copyright (C) 2020 Sartura Ltd.
-+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
-+ */
-+
-+#ifndef _MFD_IEI_WT61P803_PUZZLE_H_
-+#define _MFD_IEI_WT61P803_PUZZLE_H_
-+
-+#define IEI_WT61P803_PUZZLE_BUF_SIZE 512
-+
-+/* Command magic numbers */
-+#define IEI_WT61P803_PUZZLE_CMD_HEADER_START		0x40 /* @ */
-+#define IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER	0x25 /* % */
-+#define IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM		0xF7
-+
-+#define IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK		0x30 /* 0 */
-+#define IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK	0x70
-+
-+#define IEI_WT61P803_PUZZLE_CMD_EEPROM_READ		0xA1
-+#define IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE		0xA0
-+
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_VERSION		0x56 /* V */
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_BUILD		0x42 /* B */
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_BOOTLOADER_MODE	0x4D /* M */
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_BOOTLOADER	0x30
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_APPS		0x31
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_PROTOCOL_VERSION	0x50 /* P */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE		0x43 /* C */
-+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER		0x4F /* O */
-+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS	0x53 /* S */
-+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS 0x41 /* A */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_LED			0x52 /* R */
-+#define IEI_WT61P803_PUZZLE_CMD_LED_POWER		0x31 /* 1 */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_TEMP			0x54 /* T */
-+#define IEI_WT61P803_PUZZLE_CMD_TEMP_ALL		0x41 /* A */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_FAN			0x46 /* F */
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ		0x5A /* Z */
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE		0x57 /* W */
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_BASE		0x30
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE		0x41 /* A */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_PWM_BASE + (x)) /* 0 - 1 */
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE + (x)) /* 0 - 5 */
-+
-+struct iei_wt61p803_puzzle_mcu_version;
-+struct iei_wt61p803_puzzle_reply;
-+struct iei_wt61p803_puzzle;
-+
-+int iei_wt61p803_puzzle_write_command_watchdog(struct iei_wt61p803_puzzle *mcu,
-+					       unsigned char *cmd, size_t size,
-+					       unsigned char *reply_data, size_t *reply_size,
-+					       int retry_count);
-+
-+int iei_wt61p803_puzzle_write_command(struct iei_wt61p803_puzzle *mcu,
-+				      unsigned char *cmd, size_t size,
-+				      unsigned char *reply_data, size_t *reply_size);
-+
-+#endif /* _MFD_IEI_WT61P803_PUZZLE_H_ */
diff --git a/target/linux/mvebu/patches-5.10/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch b/target/linux/mvebu/patches-5.10/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch
deleted file mode 100644
index d31709fd853c..000000000000
--- a/target/linux/mvebu/patches-5.10/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch
+++ /dev/null
@@ -1,501 +0,0 @@
-From e3310a638cd310bfd93dbbc6d2732ab6aea18dd2 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:34 +0000
-Subject: [PATCH 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver
-
-Add the IEI WT61P803 PUZZLE HWMON driver, that handles the fan speed
-control via PWM, reading fan speed and reading on-board temperature
-sensors.
-
-The driver registers a HWMON device and a simple thermal cooling device to
-enable in-kernel fan management.
-
-This driver depends on the IEI WT61P803 PUZZLE MFD driver.
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Acked-by: Guenter Roeck <linux@roeck-us.net>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- drivers/hwmon/Kconfig                     |   8 +
- drivers/hwmon/Makefile                    |   1 +
- drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 413 ++++++++++++++++++++++
- 3 files changed, 422 insertions(+)
- create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
-
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -722,6 +722,14 @@ config SENSORS_IBMPOWERNV
- 	  This driver can also be built as a module. If so, the module
- 	  will be called ibmpowernv.
- 
-+config SENSORS_IEI_WT61P803_PUZZLE_HWMON
-+	tristate "IEI WT61P803 PUZZLE MFD HWMON Driver"
-+	depends on MFD_IEI_WT61P803_PUZZLE
-+	help
-+	  The IEI WT61P803 PUZZLE MFD HWMON Driver handles reading fan speed
-+	  and writing fan PWM values. It also supports reading on-board
-+	  temperature sensors.
-+
- config SENSORS_IIO_HWMON
- 	tristate "Hwmon driver that uses channels specified via iio maps"
- 	depends on IIO
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -83,6 +83,7 @@ obj-$(CONFIG_SENSORS_HIH6130)	+= hih6130
- obj-$(CONFIG_SENSORS_ULTRA45)	+= ultra45_env.o
- obj-$(CONFIG_SENSORS_I5500)	+= i5500_temp.o
- obj-$(CONFIG_SENSORS_I5K_AMB)	+= i5k_amb.o
-+obj-$(CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON) += iei-wt61p803-puzzle-hwmon.o
- obj-$(CONFIG_SENSORS_IBMAEM)	+= ibmaem.o
- obj-$(CONFIG_SENSORS_IBMPEX)	+= ibmpex.o
- obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
---- /dev/null
-+++ b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
-@@ -0,0 +1,445 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* IEI WT61P803 PUZZLE MCU HWMON Driver
-+ *
-+ * Copyright (C) 2020 Sartura Ltd.
-+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/hwmon.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/math64.h>
-+#include <linux/mfd/iei-wt61p803-puzzle.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/property.h>
-+#include <linux/slab.h>
-+#include <linux/thermal.h>
-+
-+#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM	2
-+#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL	255
-+
-+/**
-+ * struct iei_wt61p803_puzzle_thermal_cooling_device - Thermal cooling device instance
-+ * @mcu_hwmon:		Parent driver struct pointer
-+ * @tcdev:		Thermal cooling device pointer
-+ * @name:		Thermal cooling device name
-+ * @pwm_channel:	Controlled PWM channel (0 or 1)
-+ * @cooling_levels:	Thermal cooling device cooling levels (DT)
-+ * @cur_level:		Current cooling level
-+ * @num_levels:	Number of cooling levels
-+ */
-+struct iei_wt61p803_puzzle_thermal_cooling_device {
-+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
-+	struct thermal_cooling_device *tcdev;
-+	char name[THERMAL_NAME_LENGTH];
-+	int pwm_channel;
-+	u32 *cooling_levels;
-+	int cur_level;
-+	u8 num_levels;
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_hwmon - MCU HWMON Driver
-+ * @mcu:				MCU struct pointer
-+ * @response_buffer			Global MCU response buffer
-+ * @thermal_cooling_dev_present:	Per-channel thermal cooling device control indicator
-+ * @cdev:				Per-channel thermal cooling device private structure
-+ */
-+struct iei_wt61p803_puzzle_hwmon {
-+	struct iei_wt61p803_puzzle *mcu;
-+	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
-+	bool thermal_cooling_dev_present[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM];
-+	struct iei_wt61p803_puzzle_thermal_cooling_device
-+		*cdev[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM];
-+	struct mutex lock; /* mutex to protect response_buffer array */
-+};
-+
-+#define raw_temp_to_milidegree_celsius(x) (((x) - 0x80) * 1000)
-+static int iei_wt61p803_puzzle_read_temp_sensor(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
-+						int channel, long *value)
-+{
-+	unsigned char *resp_buf = mcu_hwmon->response_buffer;
-+	unsigned char temp_sensor_ntc_cmd[4] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_START,
-+		IEI_WT61P803_PUZZLE_CMD_TEMP,
-+		IEI_WT61P803_PUZZLE_CMD_TEMP_ALL,
-+	};
-+	size_t reply_size;
-+	int ret;
-+
-+	mutex_lock(&mcu_hwmon->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, temp_sensor_ntc_cmd,
-+						sizeof(temp_sensor_ntc_cmd), resp_buf,
-+						&reply_size);
-+	if (ret)
-+		goto exit;
-+
-+	if (reply_size != 7) {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+
-+	/* Check the number of NTC values */
-+	if (resp_buf[3] != '2') {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+
-+	*value = raw_temp_to_milidegree_celsius(resp_buf[4 + channel]);
-+exit:
-+	mutex_unlock(&mcu_hwmon->lock);
-+	return ret;
-+}
-+
-+#define raw_fan_val_to_rpm(x, y) ((((x) << 8 | (y)) / 2) * 60)
-+static int iei_wt61p803_puzzle_read_fan_speed(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
-+					      int channel, long *value)
-+{
-+	unsigned char *resp_buf = mcu_hwmon->response_buffer;
-+	unsigned char fan_speed_cmd[4] = {};
-+	size_t reply_size;
-+	int ret;
-+
-+	fan_speed_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	fan_speed_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
-+	fan_speed_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_RPM(channel);
-+
-+	mutex_lock(&mcu_hwmon->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, fan_speed_cmd,
-+						sizeof(fan_speed_cmd), resp_buf,
-+						&reply_size);
-+	if (ret)
-+		goto exit;
-+
-+	if (reply_size != 7) {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+
-+	*value = raw_fan_val_to_rpm(resp_buf[3], resp_buf[4]);
-+exit:
-+	mutex_unlock(&mcu_hwmon->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_write_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
-+						 int channel, long pwm_set_val)
-+{
-+	unsigned char *resp_buf = mcu_hwmon->response_buffer;
-+	unsigned char pwm_set_cmd[6] = {};
-+	size_t reply_size;
-+	int ret;
-+
-+	pwm_set_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	pwm_set_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
-+	pwm_set_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE;
-+	pwm_set_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel);
-+	pwm_set_cmd[4] = pwm_set_val;
-+
-+	mutex_lock(&mcu_hwmon->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_set_cmd,
-+						sizeof(pwm_set_cmd), resp_buf,
-+						&reply_size);
-+	if (ret)
-+		goto exit;
-+
-+	if (reply_size != 3) {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+
-+	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+exit:
-+	mutex_unlock(&mcu_hwmon->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_read_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
-+						int channel, long *value)
-+{
-+	unsigned char *resp_buf = mcu_hwmon->response_buffer;
-+	unsigned char pwm_get_cmd[5] = {};
-+	size_t reply_size;
-+	int ret;
-+
-+	pwm_get_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	pwm_get_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
-+	pwm_get_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ;
-+	pwm_get_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel);
-+
-+	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_get_cmd,
-+						sizeof(pwm_get_cmd), resp_buf,
-+						&reply_size);
-+	if (ret)
-+		return ret;
-+
-+	if (reply_size != 5)
-+		return -EIO;
-+
-+	if (resp_buf[2] != IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ)
-+		return -EIO;
-+
-+	*value = resp_buf[3];
-+
-+	return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_read(struct device *dev, enum hwmon_sensor_types type,
-+				    u32 attr, int channel, long *val)
-+{
-+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent);
-+
-+	switch (type) {
-+	case hwmon_pwm:
-+		return iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, channel, val);
-+	case hwmon_fan:
-+		return iei_wt61p803_puzzle_read_fan_speed(mcu_hwmon, channel, val);
-+	case hwmon_temp:
-+		return iei_wt61p803_puzzle_read_temp_sensor(mcu_hwmon, channel, val);
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+static int iei_wt61p803_puzzle_write(struct device *dev, enum hwmon_sensor_types type,
-+				     u32 attr, int channel, long val)
-+{
-+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent);
-+
-+	return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, channel, val);
-+}
-+
-+static umode_t iei_wt61p803_puzzle_is_visible(const void *data, enum hwmon_sensor_types type,
-+					      u32 attr, int channel)
-+{
-+	const struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = data;
-+
-+	switch (type) {
-+	case hwmon_pwm:
-+		if (mcu_hwmon->thermal_cooling_dev_present[channel])
-+			return 0444;
-+		if (attr == hwmon_pwm_input)
-+			return 0644;
-+		break;
-+	case hwmon_fan:
-+		if (attr == hwmon_fan_input)
-+			return 0444;
-+		break;
-+	case hwmon_temp:
-+		if (attr == hwmon_temp_input)
-+			return 0444;
-+		break;
-+	default:
-+		return 0;
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct hwmon_ops iei_wt61p803_puzzle_hwmon_ops = {
-+	.is_visible = iei_wt61p803_puzzle_is_visible,
-+	.read = iei_wt61p803_puzzle_read,
-+	.write = iei_wt61p803_puzzle_write,
-+};
-+
-+static const struct hwmon_channel_info *iei_wt61p803_puzzle_info[] = {
-+	HWMON_CHANNEL_INFO(pwm,
-+			   HWMON_PWM_INPUT,
-+			   HWMON_PWM_INPUT),
-+	HWMON_CHANNEL_INFO(fan,
-+			   HWMON_F_INPUT,
-+			   HWMON_F_INPUT,
-+			   HWMON_F_INPUT,
-+			   HWMON_F_INPUT,
-+			   HWMON_F_INPUT),
-+	HWMON_CHANNEL_INFO(temp,
-+			   HWMON_T_INPUT,
-+			   HWMON_T_INPUT),
-+	NULL
-+};
-+
-+static const struct hwmon_chip_info iei_wt61p803_puzzle_chip_info = {
-+	.ops = &iei_wt61p803_puzzle_hwmon_ops,
-+	.info = iei_wt61p803_puzzle_info,
-+};
-+
-+static int iei_wt61p803_puzzle_get_max_state(struct thermal_cooling_device *tcdev,
-+					     unsigned long *state)
-+{
-+	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+
-+	if (!cdev)
-+		return -EINVAL;
-+
-+	*state = cdev->num_levels - 1;
-+	return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_get_cur_state(struct thermal_cooling_device *tcdev,
-+					     unsigned long *state)
-+{
-+	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+
-+	if (!cdev)
-+		return -EINVAL;
-+
-+	if (cdev->cur_level < 0)
-+		return -EAGAIN;
-+
-+	*state = cdev->cur_level;
-+	return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_set_cur_state(struct thermal_cooling_device *tcdev,
-+					     unsigned long state)
-+{
-+	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+	u8 pwm_level;
-+
-+	if (!cdev)
-+		return -EINVAL;
-+
-+	if (state >= cdev->num_levels)
-+		return -EINVAL;
-+
-+	if (state == cdev->cur_level)
-+		return 0;
-+
-+	cdev->cur_level = state;
-+	pwm_level = cdev->cooling_levels[state];
-+
-+	return iei_wt61p803_puzzle_write_pwm_channel(cdev->mcu_hwmon, cdev->pwm_channel, pwm_level);
-+}
-+
-+static const struct thermal_cooling_device_ops iei_wt61p803_puzzle_cooling_ops = {
-+	.get_max_state = iei_wt61p803_puzzle_get_max_state,
-+	.get_cur_state = iei_wt61p803_puzzle_get_cur_state,
-+	.set_cur_state = iei_wt61p803_puzzle_set_cur_state,
-+};
-+
-+static int
-+iei_wt61p803_puzzle_enable_thermal_cooling_dev(struct device *dev,
-+					       struct fwnode_handle *child,
-+					       struct iei_wt61p803_puzzle_hwmon *mcu_hwmon)
-+{
-+	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev;
-+	u32 pwm_channel;
-+	u8 num_levels;
-+	int i, ret;
-+
-+	ret = fwnode_property_read_u32(child, "reg", &pwm_channel);
-+	if (ret)
-+		return ret;
-+
-+	mcu_hwmon->thermal_cooling_dev_present[pwm_channel] = true;
-+
-+	num_levels = fwnode_property_count_u32(child, "cooling-levels");
-+	if (!num_levels)
-+		return -EINVAL;
-+
-+	cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL);
-+	if (!cdev)
-+		return -ENOMEM;
-+
-+	cdev->cooling_levels = devm_kmalloc_array(dev, num_levels, sizeof(u32), GFP_KERNEL);
-+	if (!cdev->cooling_levels)
-+		return -ENOMEM;
-+
-+	ret = fwnode_property_read_u32_array(child, "cooling-levels",
-+					     cdev->cooling_levels,
-+					     num_levels);
-+	if (ret) {
-+		dev_err(dev, "Couldn't read property 'cooling-levels'\n");
-+		return ret;
-+	}
-+
-+	for (i = 0; i < num_levels; i++) {
-+		if (cdev->cooling_levels[i] >
-+		    IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL) {
-+			dev_err(dev, "iei_wt61p803_fan state[%d]:%d > %d\n", i,
-+				cdev->cooling_levels[i],
-+				IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL);
-+			return -EINVAL;
-+		}
-+	}
-+
-+	cdev->mcu_hwmon = mcu_hwmon;
-+	cdev->pwm_channel = pwm_channel;
-+	cdev->num_levels = num_levels;
-+	cdev->cur_level = -1;
-+	mcu_hwmon->cdev[pwm_channel] = cdev;
-+
-+	snprintf(cdev->name, THERMAL_NAME_LENGTH, "wt61p803_puzzle_%d", pwm_channel);
-+	cdev->tcdev = devm_thermal_of_cooling_device_register(dev, to_of_node(child), cdev->name,
-+							      cdev, &iei_wt61p803_puzzle_cooling_ops);
-+	if (IS_ERR(cdev->tcdev))
-+		return PTR_ERR(cdev->tcdev);
-+
-+	return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_hwmon_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
-+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
-+	struct fwnode_handle *child;
-+	struct device *hwmon_dev;
-+	int ret;
-+
-+	mcu_hwmon = devm_kzalloc(dev, sizeof(*mcu_hwmon), GFP_KERNEL);
-+	if (!mcu_hwmon)
-+		return -ENOMEM;
-+
-+	mcu_hwmon->mcu = mcu;
-+	platform_set_drvdata(pdev, mcu_hwmon);
-+	mutex_init(&mcu_hwmon->lock);
-+
-+	hwmon_dev = devm_hwmon_device_register_with_info(dev, "iei_wt61p803_puzzle",
-+							 mcu_hwmon,
-+							 &iei_wt61p803_puzzle_chip_info,
-+							 NULL);
-+	if (IS_ERR(hwmon_dev))
-+		return PTR_ERR(hwmon_dev);
-+
-+	/* Control fans via PWM lines via Linux Kernel */
-+	if (IS_ENABLED(CONFIG_THERMAL)) {
-+		device_for_each_child_node(dev, child) {
-+			ret = iei_wt61p803_puzzle_enable_thermal_cooling_dev(dev, child, mcu_hwmon);
-+			if (ret) {
-+				dev_err(dev, "Enabling the PWM fan failed\n");
-+				fwnode_handle_put(child);
-+				return ret;
-+			}
-+		}
-+	}
-+	return 0;
-+}
-+
-+static const struct of_device_id iei_wt61p803_puzzle_hwmon_id_table[] = {
-+	{ .compatible = "iei,wt61p803-puzzle-hwmon" },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_hwmon_id_table);
-+
-+static struct platform_driver iei_wt61p803_puzzle_hwmon_driver = {
-+	.driver = {
-+		.name = "iei-wt61p803-puzzle-hwmon",
-+		.of_match_table = iei_wt61p803_puzzle_hwmon_id_table,
-+	},
-+	.probe = iei_wt61p803_puzzle_hwmon_probe,
-+};
-+
-+module_platform_driver(iei_wt61p803_puzzle_hwmon_driver);
-+
-+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU HWMON Driver");
-+MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/mvebu/patches-5.10/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch b/target/linux/mvebu/patches-5.10/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch
deleted file mode 100644
index 3ac2427b801a..000000000000
--- a/target/linux/mvebu/patches-5.10/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch
+++ /dev/null
@@ -1,207 +0,0 @@
-From f3b44eb69cc561cf05d00506dcec0dd9be003ed8 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:35 +0000
-Subject: [PATCH 4/7] drivers: leds: Add the IEI WT61P803 PUZZLE LED driver
-
-Add support for the IEI WT61P803 PUZZLE LED driver.
-Currently only the front panel power LED is supported,
-since it is the only LED on this board wired through the
-MCU.
-
-The LED is wired directly to the on-board MCU controller
-and is toggled using an MCU command.
-
-Support for more LEDs is going to be added in case more
-boards implement this microcontroller, as LEDs use many
-different GPIOs.
-
-This driver depends on the IEI WT61P803 PUZZLE MFD driver.
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- drivers/leds/Kconfig                    |   8 ++
- drivers/leds/Makefile                   |   1 +
- drivers/leds/leds-iei-wt61p803-puzzle.c | 147 ++++++++++++++++++++++++
- 3 files changed, 156 insertions(+)
- create mode 100644 drivers/leds/leds-iei-wt61p803-puzzle.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -334,6 +334,14 @@ config LEDS_IPAQ_MICRO
- 	  Choose this option if you want to use the notification LED on
- 	  Compaq/HP iPAQ h3100 and h3600.
- 
-+config LEDS_IEI_WT61P803_PUZZLE
-+	tristate "LED Support for the IEI WT61P803 PUZZLE MCU"
-+	depends on LEDS_CLASS
-+	depends on MFD_IEI_WT61P803_PUZZLE
-+	help
-+	  This option enables support for LEDs controlled by the IEI WT61P803
-+	  M801 MCU.
-+
- config LEDS_HP6XX
- 	tristate "LED Support for the HP Jornada 6xx"
- 	depends on LEDS_CLASS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -35,6 +35,7 @@ obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.
- obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
- obj-$(CONFIG_LEDS_IP30)			+= leds-ip30.o
- obj-$(CONFIG_LEDS_IPAQ_MICRO)		+= leds-ipaq-micro.o
-+obj-$(CONFIG_LEDS_IEI_WT61P803_PUZZLE)	+= leds-iei-wt61p803-puzzle.o
- obj-$(CONFIG_LEDS_IS31FL319X)		+= leds-is31fl319x.o
- obj-$(CONFIG_LEDS_IS31FL32XX)		+= leds-is31fl32xx.o
- obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
---- /dev/null
-+++ b/drivers/leds/leds-iei-wt61p803-puzzle.c
-@@ -0,0 +1,147 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* IEI WT61P803 PUZZLE MCU LED Driver
-+ *
-+ * Copyright (C) 2020 Sartura Ltd.
-+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
-+ */
-+
-+#include <linux/leds.h>
-+#include <linux/mfd/iei-wt61p803-puzzle.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/property.h>
-+#include <linux/slab.h>
-+
-+enum iei_wt61p803_puzzle_led_state {
-+	IEI_LED_OFF = 0x30,
-+	IEI_LED_ON = 0x31,
-+	IEI_LED_BLINK_5HZ = 0x32,
-+	IEI_LED_BLINK_1HZ = 0x33,
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_led - MCU LED Driver
-+ * @cdev:		LED classdev
-+ * @mcu:		MCU struct pointer
-+ * @response_buffer	Global MCU response buffer
-+ * @lock:		General mutex lock to protect simultaneous R/W access to led_power_state
-+ * @led_power_state:	State of the front panel power LED
-+ */
-+struct iei_wt61p803_puzzle_led {
-+	struct led_classdev cdev;
-+	struct iei_wt61p803_puzzle *mcu;
-+	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
-+	struct mutex lock; /* mutex to protect led_power_state */
-+	int led_power_state;
-+};
-+
-+static inline struct iei_wt61p803_puzzle_led *cdev_to_iei_wt61p803_puzzle_led
-+	(struct led_classdev *led_cdev)
-+{
-+	return container_of(led_cdev, struct iei_wt61p803_puzzle_led, cdev);
-+}
-+
-+static int iei_wt61p803_puzzle_led_brightness_set_blocking(struct led_classdev *cdev,
-+							   enum led_brightness brightness)
-+{
-+	struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
-+	unsigned char *resp_buf = priv->response_buffer;
-+	unsigned char led_power_cmd[5] = {};
-+	size_t reply_size;
-+	int ret;
-+
-+	led_power_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	led_power_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
-+	led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_POWER;
-+	led_power_cmd[3] = brightness == LED_OFF ? IEI_LED_OFF : IEI_LED_ON;
-+
-+	ret = iei_wt61p803_puzzle_write_command(priv->mcu, led_power_cmd,
-+						sizeof(led_power_cmd),
-+						resp_buf,
-+						&reply_size);
-+	if (ret)
-+		return ret;
-+
-+	if (reply_size != 3)
-+		return -EIO;
-+
-+	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK))
-+		return -EIO;
-+
-+	mutex_lock(&priv->lock);
-+	priv->led_power_state = brightness;
-+	mutex_unlock(&priv->lock);
-+
-+	return 0;
-+}
-+
-+static enum led_brightness iei_wt61p803_puzzle_led_brightness_get(struct led_classdev *cdev)
-+{
-+	struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
-+	int led_state;
-+
-+	mutex_lock(&priv->lock);
-+	led_state = priv->led_power_state;
-+	mutex_unlock(&priv->lock);
-+
-+	return led_state;
-+}
-+
-+static int iei_wt61p803_puzzle_led_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
-+	struct iei_wt61p803_puzzle_led *priv;
-+	struct led_init_data init_data = {};
-+	struct fwnode_handle *child;
-+	int ret;
-+
-+	if (device_get_child_node_count(dev) != 1)
-+		return -EINVAL;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->mcu = mcu;
-+	priv->led_power_state = 1;
-+	mutex_init(&priv->lock);
-+	dev_set_drvdata(dev, priv);
-+
-+	child = device_get_next_child_node(dev, NULL);
-+	init_data.fwnode = child;
-+
-+	priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
-+	priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
-+	priv->cdev.max_brightness = 1;
-+
-+	ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
-+	if (ret)
-+		dev_err(dev, "Could not register LED\n");
-+
-+	fwnode_handle_put(child);
-+	return ret;
-+}
-+
-+static const struct of_device_id iei_wt61p803_puzzle_led_of_match[] = {
-+	{ .compatible = "iei,wt61p803-puzzle-leds" },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_led_of_match);
-+
-+static struct platform_driver iei_wt61p803_puzzle_led_driver = {
-+	.driver = {
-+		.name = "iei-wt61p803-puzzle-led",
-+		.of_match_table = iei_wt61p803_puzzle_led_of_match,
-+	},
-+	.probe = iei_wt61p803_puzzle_led_probe,
-+};
-+module_platform_driver(iei_wt61p803_puzzle_led_driver);
-+
-+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE front panel LED driver");
-+MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:leds-iei-wt61p803-puzzle");
diff --git a/target/linux/mvebu/patches-5.10/905-Documentation-ABI-Add-iei-wt61p803-puzzle-driver-sys.patch b/target/linux/mvebu/patches-5.10/905-Documentation-ABI-Add-iei-wt61p803-puzzle-driver-sys.patch
deleted file mode 100644
index b1d420ef0a90..000000000000
--- a/target/linux/mvebu/patches-5.10/905-Documentation-ABI-Add-iei-wt61p803-puzzle-driver-sys.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 2fab3b4956c5b2f83c1e1abffc1df39de2933d83 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:36 +0000
-Subject: [PATCH 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs
- interface documentation
-
-Add the iei-wt61p803-puzzle driver sysfs interface documentation to allow
-monitoring and control of the microcontroller from user space.
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- .../testing/sysfs-driver-iei-wt61p803-puzzle  | 61 +++++++++++++++++++
- 1 file changed, 61 insertions(+)
- create mode 100644 Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle
-
---- /dev/null
-+++ b/Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle
-@@ -0,0 +1,61 @@
-+What:		/sys/bus/serial/devices/.../mac_address_*
-+Date:		September 2020
-+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
-+Description:	(RW) Internal factory assigned MAC address values
-+
-+What:		/sys/bus/serial/devices/.../serial_number
-+Date:		September 2020
-+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
-+Description:	(RW) Internal factory assigned serial number
-+
-+What:		/sys/bus/serial/devices/.../version
-+Date:		September 2020
-+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
-+Description:	(RO) Internal MCU firmware version
-+
-+What:		/sys/bus/serial/devices/.../protocol_version
-+Date:		September 2020
-+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
-+Description:	(RO) Internal MCU communication protocol version
-+
-+What:		/sys/bus/serial/devices/.../power_loss_recovery
-+Date:		September 2020
-+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
-+Description:	(RW) Host platform power loss recovery settings
-+		Value mapping: 0 - Always-On, 1 - Always-Off, 2 - Always-AC, 3 - Always-WA
-+
-+What:		/sys/bus/serial/devices/.../bootloader_mode
-+Date:		September 2020
-+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
-+Description:	(RO) Internal MCU bootloader mode status
-+		Value mapping:
-+		0 - normal mode
-+		1 - bootloader mode
-+
-+What:		/sys/bus/serial/devices/.../power_status
-+Date:		September 2020
-+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
-+Description:	(RO) Power status indicates the host platform power on method.
-+		Value mapping (bitwise list):
-+		0x80 - Null
-+		0x40 - Firmware flag
-+		0x20 - Power loss detection flag (powered off)
-+		0x10 - Power loss detection flag (AC mode)
-+		0x08 - Button power on
-+		0x04 - Wake-on-LAN power on
-+		0x02 - RTC alarm power on
-+		0x01 - AC recover power on
-+
-+What:		/sys/bus/serial/devices/.../build_info
-+Date:		September 2020
-+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
-+Description:	(RO) Internal MCU firmware build date
-+		Format: yyyy/mm/dd hh:mm
-+
-+What:		/sys/bus/serial/devices/.../ac_recovery_status
-+Date:		September 2020
-+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
-+Description:	(RO) Host platform AC recovery status value
-+		Value mapping:
-+		0 - board has not been recovered from power down
-+		1 - board has been recovered from power down
diff --git a/target/linux/mvebu/patches-5.10/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch b/target/linux/mvebu/patches-5.10/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch
deleted file mode 100644
index 345d4ca03b25..000000000000
--- a/target/linux/mvebu/patches-5.10/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 0aff3e5923fecc6842473ad07a688d6e2f2c2d55 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:37 +0000
-Subject: [PATCH 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver
- documentation
-
-Add the iei-wt61p803-puzzle driver hwmon driver interface documentation.
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- .../hwmon/iei-wt61p803-puzzle-hwmon.rst       | 43 +++++++++++++++++++
- Documentation/hwmon/index.rst                 |  1 +
- 2 files changed, 44 insertions(+)
- create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
-
---- /dev/null
-+++ b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
-@@ -0,0 +1,43 @@
-+.. SPDX-License-Identifier: GPL-2.0-only
-+
-+Kernel driver iei-wt61p803-puzzle-hwmon
-+=======================================
-+
-+Supported chips:
-+ * IEI WT61P803 PUZZLE for IEI Puzzle M801
-+
-+   Prefix: 'iei-wt61p803-puzzle-hwmon'
-+
-+Author: Luka Kovacic <luka.kovacic@sartura.hr>
-+
-+
-+Description
-+-----------
-+
-+This driver adds fan and temperature sensor reading for some IEI Puzzle
-+series boards.
-+
-+Sysfs attributes
-+----------------
-+
-+The following attributes are supported:
-+
-+- IEI WT61P803 PUZZLE for IEI Puzzle M801
-+
-+/sys files in hwmon subsystem
-+-----------------------------
-+
-+================= == =====================================================
-+fan[1-5]_input    RO files for fan speed (in RPM)
-+pwm[1-2]          RW files for fan[1-2] target duty cycle (0..255)
-+temp[1-2]_input   RO files for temperature sensors, in millidegree Celsius
-+================= == =====================================================
-+
-+/sys files in thermal subsystem
-+-------------------------------
-+
-+================= == =====================================================
-+cur_state         RW file for current cooling state of the cooling device
-+                     (0..max_state)
-+max_state         RO file for maximum cooling state of the cooling device
-+================= == =====================================================
---- a/Documentation/hwmon/index.rst
-+++ b/Documentation/hwmon/index.rst
-@@ -71,6 +71,7 @@ Hardware Monitoring Kernel Drivers
-    ibmaem
-    ibm-cffps
-    ibmpowernv
-+   iei-wt61p803-puzzle-hwmon
-    ina209
-    ina2xx
-    ina3221
diff --git a/target/linux/mvebu/patches-5.10/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch b/target/linux/mvebu/patches-5.10/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch
deleted file mode 100644
index 577a9b40def5..000000000000
--- a/target/linux/mvebu/patches-5.10/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 12479baad28d2a08c6cb9e83471057635fa1635c Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:38 +0000
-Subject: [PATCH 7/7] MAINTAINERS: Add an entry for the IEI WT61P803 PUZZLE
- driver
-
-Add an entry for the IEI WT61P803 PUZZLE driver (MFD, HWMON, LED drivers).
-
-Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
-Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Cc: Robert Marko <robert.marko@sartura.hr>
----
- MAINTAINERS | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -8538,6 +8538,22 @@ F:	include/net/nl802154.h
- F:	net/ieee802154/
- F:	net/mac802154/
- 
-+IEI WT61P803 M801 MFD DRIVER
-+M:	Luka Kovacic <luka.kovacic@sartura.hr>
-+M:	Luka Perkov <luka.perkov@sartura.hr>
-+M:	Goran Medic <goran.medic@sartura.hr>
-+L:	linux-kernel@vger.kernel.org
-+S:	Maintained
-+F:	Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle
-+F:	Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
-+F:	Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
-+F:	Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
-+F:	Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
-+F:	drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
-+F:	drivers/leds/leds-iei-wt61p803-puzzle.c
-+F:	drivers/mfd/iei-wt61p803-puzzle.c
-+F:	include/linux/mfd/iei-wt61p803-puzzle.h
-+
- IFE PROTOCOL
- M:	Yotam Gigi <yotam.gi@gmail.com>
- M:	Jamal Hadi Salim <jhs@mojatatu.com>
diff --git a/target/linux/mvebu/patches-5.10/910-drivers-leds-wt61p803-puzzle-improvements.patch b/target/linux/mvebu/patches-5.10/910-drivers-leds-wt61p803-puzzle-improvements.patch
deleted file mode 100644
index 150a65498cd3..000000000000
--- a/target/linux/mvebu/patches-5.10/910-drivers-leds-wt61p803-puzzle-improvements.patch
+++ /dev/null
@@ -1,271 +0,0 @@
---- a/drivers/leds/leds-iei-wt61p803-puzzle.c
-+++ b/drivers/leds/leds-iei-wt61p803-puzzle.c
-@@ -9,9 +9,13 @@
- #include <linux/mfd/iei-wt61p803-puzzle.h>
- #include <linux/mod_devicetable.h>
- #include <linux/module.h>
-+#include <linux/of.h>
- #include <linux/platform_device.h>
- #include <linux/property.h>
- #include <linux/slab.h>
-+#include <linux/workqueue.h>
-+
-+#define IEI_LEDS_MAX		4
- 
- enum iei_wt61p803_puzzle_led_state {
- 	IEI_LED_OFF = 0x30,
-@@ -33,7 +37,11 @@ struct iei_wt61p803_puzzle_led {
- 	struct iei_wt61p803_puzzle *mcu;
- 	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
- 	struct mutex lock; /* mutex to protect led_power_state */
-+	struct work_struct work;
- 	int led_power_state;
-+	int id;
-+	u8 blinking;
-+	bool active_low;
- };
- 
- static inline struct iei_wt61p803_puzzle_led *cdev_to_iei_wt61p803_puzzle_led
-@@ -51,10 +59,18 @@ static int iei_wt61p803_puzzle_led_brigh
- 	size_t reply_size;
- 	int ret;
- 
-+	if (priv->blinking) {
-+		if (brightness == LED_OFF)
-+			priv->blinking = 0;
-+		else
-+			return 0;
-+	}
-+
- 	led_power_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
- 	led_power_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
--	led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_POWER;
--	led_power_cmd[3] = brightness == LED_OFF ? IEI_LED_OFF : IEI_LED_ON;
-+	led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_SET(priv->id);
-+	led_power_cmd[3] = ((brightness == LED_OFF) ^ priv->active_low) ?
-+				IEI_LED_OFF : priv->blinking?priv->blinking:IEI_LED_ON;
- 
- 	ret = iei_wt61p803_puzzle_write_command(priv->mcu, led_power_cmd,
- 						sizeof(led_power_cmd),
-@@ -90,39 +106,166 @@ static enum led_brightness iei_wt61p803_
- 	return led_state;
- }
- 
-+static void iei_wt61p803_puzzle_led_apply_blink(struct work_struct *work)
-+{
-+	struct iei_wt61p803_puzzle_led *priv = container_of(work, struct iei_wt61p803_puzzle_led, work);
-+	unsigned char led_blink_cmd[5] = {};
-+	unsigned char resp_buf[IEI_WT61P803_PUZZLE_BUF_SIZE];
-+	size_t reply_size;
-+
-+	led_blink_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	led_blink_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
-+	led_blink_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_SET(priv->id);
-+	led_blink_cmd[3] = priv->blinking;
-+
-+	iei_wt61p803_puzzle_write_command(priv->mcu, led_blink_cmd,
-+					  sizeof(led_blink_cmd),
-+					  resp_buf,
-+					  &reply_size);
-+
-+	return;
-+}
-+
-+static int iei_wt61p803_puzzle_led_set_blink(struct led_classdev *cdev,
-+					     unsigned long *delay_on,
-+					     unsigned long *delay_off)
-+{
-+	struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
-+	u8 blink_mode = 0;
-+	int ret = 0;
-+
-+	/* set defaults */
-+	if (!*delay_on && !*delay_off) {
-+		*delay_on = 500;
-+		*delay_off = 500;
-+	}
-+
-+	/* minimum delay for soft-driven blinking is 100ms to keep load low */
-+	if (*delay_on < 100)
-+		*delay_on = 100;
-+
-+	if (*delay_off < 100)
-+		*delay_off = 100;
-+
-+	/* offload blinking to hardware, if possible */
-+	if (*delay_on != *delay_off) {
-+		ret = -EINVAL;
-+	} else if (*delay_on == 100) {
-+		blink_mode = IEI_LED_BLINK_5HZ;
-+		*delay_on = 100;
-+		*delay_off = 100;
-+	} else if (*delay_on <= 500) {
-+		blink_mode = IEI_LED_BLINK_1HZ;
-+		*delay_on = 500;
-+		*delay_off = 500;
-+	} else {
-+		ret = -EINVAL;
-+	}
-+
-+	mutex_lock(&priv->lock);
-+	priv->blinking = blink_mode;
-+	mutex_unlock(&priv->lock);
-+
-+	if (blink_mode)
-+		schedule_work(&priv->work);
-+
-+	return ret;
-+}
-+
-+
-+static int iei_wt61p803_puzzle_led_set_dt_default(struct led_classdev *cdev,
-+				     struct device_node *np)
-+{
-+	const char *state;
-+	int ret = 0;
-+
-+	state = of_get_property(np, "default-state", NULL);
-+	if (state) {
-+		if (!strcmp(state, "on")) {
-+			ret =
-+			iei_wt61p803_puzzle_led_brightness_set_blocking(
-+				cdev, cdev->max_brightness);
-+		} else  {
-+			ret = iei_wt61p803_puzzle_led_brightness_set_blocking(
-+				cdev, LED_OFF);
-+		}
-+	}
-+
-+	return ret;
-+}
-+
- static int iei_wt61p803_puzzle_led_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-+	struct device_node *np = dev_of_node(dev);
-+	struct device_node *child;
- 	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
- 	struct iei_wt61p803_puzzle_led *priv;
--	struct led_init_data init_data = {};
--	struct fwnode_handle *child;
- 	int ret;
-+	u32 reg;
- 
--	if (device_get_child_node_count(dev) != 1)
-+	if (device_get_child_node_count(dev) > IEI_LEDS_MAX)
- 		return -EINVAL;
- 
--	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
--	if (!priv)
--		return -ENOMEM;
--
--	priv->mcu = mcu;
--	priv->led_power_state = 1;
--	mutex_init(&priv->lock);
--	dev_set_drvdata(dev, priv);
--
--	child = device_get_next_child_node(dev, NULL);
--	init_data.fwnode = child;
--
--	priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
--	priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
--	priv->cdev.max_brightness = 1;
-+	for_each_available_child_of_node(np, child) {
-+		struct led_init_data init_data = {};
- 
--	ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
--	if (ret)
--		dev_err(dev, "Could not register LED\n");
-+		ret = of_property_read_u32(child, "reg", &reg);
-+		if (ret) {
-+			dev_err(dev, "Failed to read led 'reg' property\n");
-+			goto put_child_node;
-+		}
-+
-+		if (reg > IEI_LEDS_MAX) {
-+			dev_err(dev, "Invalid led reg %u\n", reg);
-+			ret = -EINVAL;
-+			goto put_child_node;
-+		}
-+
-+		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+		if (!priv) {
-+			ret = -ENOMEM;
-+			goto put_child_node;
-+		}
-+
-+		mutex_init(&priv->lock);
-+
-+		dev_set_drvdata(dev, priv);
-+
-+		if (of_property_read_bool(child, "active-low"))
-+			priv->active_low = true;
-+
-+		priv->mcu = mcu;
-+		priv->id = reg;
-+		priv->led_power_state = 1;
-+		priv->blinking = 0;
-+		init_data.fwnode = of_fwnode_handle(child);
-+
-+		priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
-+		priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
-+		priv->cdev.blink_set = iei_wt61p803_puzzle_led_set_blink;
-+
-+		priv->cdev.max_brightness = 1;
-+
-+		INIT_WORK(&priv->work, iei_wt61p803_puzzle_led_apply_blink);
-+
-+		ret = iei_wt61p803_puzzle_led_set_dt_default(&priv->cdev, child);
-+		if (ret) {
-+			dev_err(dev, "Could apply default from DT\n");
-+			goto put_child_node;
-+		}
-+
-+		ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
-+		if (ret) {
-+			dev_err(dev, "Could not register LED\n");
-+			goto put_child_node;
-+		}
-+	}
-+
-+	return ret;
- 
--	fwnode_handle_put(child);
-+put_child_node:
-+	of_node_put(child);
- 	return ret;
- }
- 
---- a/include/linux/mfd/iei-wt61p803-puzzle.h
-+++ b/include/linux/mfd/iei-wt61p803-puzzle.h
-@@ -36,7 +36,7 @@
- #define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS 0x41 /* A */
- 
- #define IEI_WT61P803_PUZZLE_CMD_LED			0x52 /* R */
--#define IEI_WT61P803_PUZZLE_CMD_LED_POWER		0x31 /* 1 */
-+#define IEI_WT61P803_PUZZLE_CMD_LED_SET(n)		(0x30 | (n))
- 
- #define IEI_WT61P803_PUZZLE_CMD_TEMP			0x54 /* T */
- #define IEI_WT61P803_PUZZLE_CMD_TEMP_ALL		0x41 /* A */
---- a/drivers/mfd/iei-wt61p803-puzzle.c
-+++ b/drivers/mfd/iei-wt61p803-puzzle.c
-@@ -176,6 +176,9 @@ static int iei_wt61p803_puzzle_recv_buf(
- 	struct iei_wt61p803_puzzle *mcu = serdev_device_get_drvdata(serdev);
- 	int ret;
- 
-+	print_hex_dump_debug("puzzle-mcu rx: ", DUMP_PREFIX_NONE,
-+			     16, 1, data, size, false);
-+
- 	ret = iei_wt61p803_puzzle_process_resp(mcu, data, size);
- 	/* Return the number of processed bytes if function returns error,
- 	 * discard the remaining incoming data, since the frame this data
-@@ -246,6 +249,9 @@ int iei_wt61p803_puzzle_write_command(st
- 
- 	cmd[size - 1] = iei_wt61p803_puzzle_checksum(cmd, size - 1);
- 
-+	print_hex_dump_debug("puzzle-mcu tx: ", DUMP_PREFIX_NONE,
-+			     16, 1, cmd, size, false);
-+
- 	/* Initialize reply struct */
- 	reinit_completion(&mcu->reply->received);
- 	mcu->reply->size = 0;
diff --git a/target/linux/mvebu/patches-5.10/911-drivers-leds-wt61p803-puzzle-mcu-retry.patch b/target/linux/mvebu/patches-5.10/911-drivers-leds-wt61p803-puzzle-mcu-retry.patch
deleted file mode 100644
index 2f0b1788ff68..000000000000
--- a/target/linux/mvebu/patches-5.10/911-drivers-leds-wt61p803-puzzle-mcu-retry.patch
+++ /dev/null
@@ -1,63 +0,0 @@
---- a/drivers/mfd/iei-wt61p803-puzzle.c
-+++ b/drivers/mfd/iei-wt61p803-puzzle.c
-@@ -241,6 +241,7 @@ int iei_wt61p803_puzzle_write_command(st
- {
- 	struct device *dev = &mcu->serdev->dev;
- 	int ret;
-+	int retries;
- 
- 	if (size <= 1 || size > IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH)
- 		return -EINVAL;
-@@ -252,24 +253,36 @@ int iei_wt61p803_puzzle_write_command(st
- 	print_hex_dump_debug("puzzle-mcu tx: ", DUMP_PREFIX_NONE,
- 			     16, 1, cmd, size, false);
- 
-+	retries = 3;
- 	/* Initialize reply struct */
--	reinit_completion(&mcu->reply->received);
--	mcu->reply->size = 0;
--	usleep_range(2000, 10000);
--	serdev_device_write_flush(mcu->serdev);
--	ret = serdev_device_write_buf(mcu->serdev, cmd, size);
--	if (ret < 0)
--		goto exit;
--
--	serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
--	ret = wait_for_completion_timeout(&mcu->reply->received,
--					  IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
--	if (ret == 0) {
--		dev_err(dev, "Command reply receive timeout\n");
--		ret = -ETIMEDOUT;
--		goto exit;
-+	while (retries) {
-+		reinit_completion(&mcu->reply->received);
-+		mcu->reply->size = 0;
-+		usleep_range(2000, 10000);
-+		serdev_device_write_flush(mcu->serdev);
-+		ret = serdev_device_write_buf(mcu->serdev, cmd, size);
-+		if (ret < 0)
-+			goto exit;
-+
-+		serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-+		ret = wait_for_completion_timeout(&mcu->reply->received,
-+						  IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-+		retries--;
-+		if (ret == 0) {
-+			if (retries == 0) {
-+				dev_err(dev, "Command reply receive timeout\n");
-+				ret = -ETIMEDOUT;
-+				goto exit;
-+			}
-+		}
-+		else {
-+			if (mcu->reply->data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+				mcu->reply->data[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+				mcu->reply->data[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK) {
-+				break;
-+			}
-+		}
- 	}
--
- 	*reply_size = mcu->reply->size;
- 	/* Copy the received data, as it will not be available after a new frame is received */
- 	memcpy(reply_data, mcu->reply->data, mcu->reply->size);
diff --git a/target/linux/octeon/config-5.10 b/target/linux/octeon/config-5.10
deleted file mode 100644
index 58a02e6e6d96..000000000000
--- a/target/linux/octeon/config-5.10
+++ /dev/null
@@ -1,250 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS=12
-CONFIG_ARCH_MMAP_RND_BITS_MAX=18
-CONFIG_ARCH_MMAP_RND_BITS_MIN=12
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BUILTIN_DTB=y
-CONFIG_CAVIUM_CN63XXP1=y
-CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE=0
-CONFIG_CAVIUM_OCTEON_LOCK_L2=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB=y
-CONFIG_CAVIUM_OCTEON_SOC=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-# CONFIG_COMMON_CLK is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_CAVIUM_OCTEON=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS64=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_HUGEPAGES=y
-CONFIG_CRAMFS=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-# CONFIG_CRYPTO_MD5_OCTEON is not set
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_SHA1_OCTEON is not set
-# CONFIG_CRYPTO_SHA256_OCTEON is not set
-# CONFIG_CRYPTO_SHA512_OCTEON is not set
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_LEGACY_SYSFS=y
-CONFIG_EDAC_OCTEON_L2C=y
-CONFIG_EDAC_OCTEON_LMC=y
-CONFIG_EDAC_OCTEON_PC=y
-CONFIG_EDAC_OCTEON_PCI=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIO_OCTEON=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OCTEON=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_OCTEON=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_CAVIUM=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_OCTEON=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-# CONFIG_MIPS32_N32 is not set
-# CONFIG_MIPS32_O32 is not set
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_MIPS_CMDLINE_FROM_DTB is not set
-CONFIG_MIPS_EBPF_JIT=y
-CONFIG_MIPS_ELF_APPENDED_DTB=y
-CONFIG_MIPS_L1_CACHE_SHIFT=7
-CONFIG_MIPS_L1_CACHE_SHIFT_7=y
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_NR_CPU_NR_MAP=1024
-CONFIG_MIPS_NR_CPU_NR_MAP_1024=y
-CONFIG_MIPS_PGD_C0_CONTEXT=y
-# CONFIG_MIPS_RAW_APPENDED_DTB is not set
-CONFIG_MIPS_SPRAM=y
-# CONFIG_MIPS_VA_BITS_48 is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CAVIUM_OCTEON=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NR_CPUS=16
-CONFIG_NR_CPUS_DEFAULT_64=y
-CONFIG_NVMEM=y
-CONFIG_OCTEON_ETHERNET=y
-CONFIG_OCTEON_ILM=y
-CONFIG_OCTEON_MGMT_ETHERNET=y
-CONFIG_OCTEON_USB=y
-CONFIG_OCTEON_WDT=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-CONFIG_RELAY=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_SCSI=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_OCTEON=y
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_CAVIUM_OCTEON=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_RELOCATABLE=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PLATFORM=y
-# CONFIG_USB_OCTEON_EHCI is not set
-# CONFIG_USB_OCTEON_OHCI is not set
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VFAT_FS=y
-CONFIG_VITESSE_PHY=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_XPS=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/octeon/patches-5.10/100-mips_image_cmdline_hack.patch b/target/linux/octeon/patches-5.10/100-mips_image_cmdline_hack.patch
deleted file mode 100644
index 4edf527246b8..000000000000
--- a/target/linux/octeon/patches-5.10/100-mips_image_cmdline_hack.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: John Crispin <john@phrozen.org>
-Subject: hack: kernel: add generic image_cmdline hack to MIPS targets
-
-lede-commit: d59f5b3a987a48508257a0ddbaeadc7909f9f976
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/Kconfig       | 4 ++++
- arch/mips/kernel/head.S | 6 ++++++
- 2 files changed, 10 insertions(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1170,6 +1170,10 @@ config MIPS_MSC
- config SYNC_R4K
- 	bool
- 
-+config IMAGE_CMDLINE_HACK
-+	bool "OpenWrt specific image command line hack"
-+	default n
-+
- config NO_IOPORT_MAP
- 	def_bool n
- 
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -79,6 +79,12 @@ FEXPORT(__kernel_entry)
- 	j	kernel_entry
- #endif /* CONFIG_BOOT_RAW */
- 
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+	.ascii	"CMDLINE:"
-+EXPORT(__image_cmdline)
-+	.fill	0x400
-+#endif /* CONFIG_IMAGE_CMDLINE_HACK */
-+
- 	__REF
- 
- NESTED(kernel_entry, 16, sp)			# kernel entry point
diff --git a/target/linux/octeon/patches-5.10/100-ubnt_edgerouter2_support.patch b/target/linux/octeon/patches-5.10/100-ubnt_edgerouter2_support.patch
deleted file mode 100644
index 606debda7f56..000000000000
--- a/target/linux/octeon/patches-5.10/100-ubnt_edgerouter2_support.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-@@ -174,6 +174,8 @@ int cvmx_helper_board_get_mii_address(in
- 			return 7 - ipd_port;
- 		else
- 			return -1;
-+	case CVMX_BOARD_TYPE_UBNT_E200:
-+		return -1;
- 	case CVMX_BOARD_TYPE_KONTRON_S1901:
- 		if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
- 			return 1;
diff --git a/target/linux/octeon/patches-5.10/110-er200-ethernet_probe_order.patch b/target/linux/octeon/patches-5.10/110-er200-ethernet_probe_order.patch
deleted file mode 100644
index b816e9c43019..000000000000
--- a/target/linux/octeon/patches-5.10/110-er200-ethernet_probe_order.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/staging/octeon/ethernet.c
-+++ b/drivers/staging/octeon/ethernet.c
-@@ -679,6 +679,7 @@ static int cvm_oct_probe(struct platform
- 	int interface;
- 	int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE;
- 	int qos;
-+	int i;
- 	struct device_node *pip;
- 	int mtu_overhead = ETH_HLEN + ETH_FCS_LEN;
- 
-@@ -800,13 +801,19 @@ static int cvm_oct_probe(struct platform
- 	}
- 
- 	num_interfaces = cvmx_helper_get_number_of_interfaces();
--	for (interface = 0; interface < num_interfaces; interface++) {
--		cvmx_helper_interface_mode_t imode =
--		    cvmx_helper_interface_get_mode(interface);
--		int num_ports = cvmx_helper_ports_on_interface(interface);
-+	for (i = 0; i < num_interfaces; i++) {
-+		cvmx_helper_interface_mode_t imode;
-+		int interface;
-+		int num_ports;
- 		int port;
- 		int port_index;
- 
-+		interface = i;
-+		if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_UBNT_E200)
-+			interface = num_interfaces - (i + 1);
-+
-+		num_ports = cvmx_helper_ports_on_interface(interface);
-+		imode = cvmx_helper_interface_get_mode(interface);
- 		for (port_index = 0,
- 		     port = cvmx_helper_get_ipd_port(interface, 0);
- 		     port < cvmx_helper_get_ipd_port(interface, num_ports);
diff --git a/target/linux/octeon/patches-5.10/120-cmdline-hack.patch b/target/linux/octeon/patches-5.10/120-cmdline-hack.patch
deleted file mode 100644
index 91b2936d99b3..000000000000
--- a/target/linux/octeon/patches-5.10/120-cmdline-hack.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/arch/mips/cavium-octeon/setup.c
-+++ b/arch/mips/cavium-octeon/setup.c
-@@ -654,6 +654,35 @@ void octeon_user_io_init(void)
- 	write_c0_derraddr1(0);
- }
- 
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+extern char __image_cmdline[];
-+
-+static int __init octeon_use_image_cmdline(void)
-+{
-+       char *p = __image_cmdline;
-+       int replace = 0;
-+
-+       if (*p == '-') {
-+               replace = 1;
-+               p++;
-+       }
-+
-+       if (*p == '\0')
-+               return 0;
-+
-+       if (replace) {
-+               strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
-+       } else {
-+               strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
-+               strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
-+       }
-+
-+       return 1;
-+}
-+#else
-+static inline int octeon_use_image_cmdline(void) { return 0; }
-+#endif
-+
- /**
-  * Early entry point for arch setup
-  */
-@@ -898,6 +927,8 @@ void __init prom_init(void)
- 		}
- 	}
- 
-+	octeon_use_image_cmdline();
-+
- 	if (strstr(arcs_cmdline, "console=") == NULL) {
- 		if (octeon_uart == 1)
- 			strcat(arcs_cmdline, " console=ttyS1,115200");
diff --git a/target/linux/octeon/patches-5.10/130-itus_shield_support.patch b/target/linux/octeon/patches-5.10/130-itus_shield_support.patch
deleted file mode 100644
index a041331c20dd..000000000000
--- a/target/linux/octeon/patches-5.10/130-itus_shield_support.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-@@ -297,7 +297,7 @@ enum cvmx_board_types_enum {
- 	CVMX_BOARD_TYPE_UBNT_E100 = 20002,
- 	CVMX_BOARD_TYPE_UBNT_E200 = 20003,
- 	CVMX_BOARD_TYPE_UBNT_E220 = 20005,
--	CVMX_BOARD_TYPE_CUST_DSR1000N = 20006,
-+	CVMX_BOARD_TYPE_ITUS_SHIELD = 20006,
- 	CVMX_BOARD_TYPE_KONTRON_S1901 = 21901,
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
- 
-@@ -400,7 +400,7 @@ static inline const char *cvmx_board_typ
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220)
--		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N)
-+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_ITUS_SHIELD)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
- 	}
---- a/arch/mips/cavium-octeon/octeon-platform.c
-+++ b/arch/mips/cavium-octeon/octeon-platform.c
-@@ -774,7 +774,7 @@ int __init octeon_prune_device_tree(void
- 	if (fdt_check_header(initial_boot_params))
- 		panic("Corrupt Device Tree.");
- 
--	WARN(octeon_bootinfo->board_type == CVMX_BOARD_TYPE_CUST_DSR1000N,
-+	WARN(octeon_bootinfo->board_type == CVMX_BOARD_TYPE_ITUS_SHIELD,
- 	     "Built-in DTB booting is deprecated on %s. Please switch to use appended DTB.",
- 	     cvmx_board_type_to_string(octeon_bootinfo->board_type));
- 
---- a/arch/mips/pci/pci-octeon.c
-+++ b/arch/mips/pci/pci-octeon.c
-@@ -211,8 +211,6 @@ const char *octeon_get_pci_interrupts(vo
- 		return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA";
- 	case CVMX_BOARD_TYPE_BBGW_REF:
- 		return "AABCD";
--	case CVMX_BOARD_TYPE_CUST_DSR1000N:
--		return "CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC";
- 	case CVMX_BOARD_TYPE_THUNDER:
- 	case CVMX_BOARD_TYPE_EBH3000:
- 	default:
diff --git a/target/linux/octeon/patches-5.10/140-octeon_e300_support.patch b/target/linux/octeon/patches-5.10/140-octeon_e300_support.patch
deleted file mode 100644
index 7fe56a47d126..000000000000
--- a/target/linux/octeon/patches-5.10/140-octeon_e300_support.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-@@ -298,6 +298,7 @@ enum cvmx_board_types_enum {
- 	CVMX_BOARD_TYPE_UBNT_E200 = 20003,
- 	CVMX_BOARD_TYPE_UBNT_E220 = 20005,
- 	CVMX_BOARD_TYPE_ITUS_SHIELD = 20006,
-+	CVMX_BOARD_TYPE_UBNT_E300 = 20300,
- 	CVMX_BOARD_TYPE_KONTRON_S1901 = 21901,
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
- 
-@@ -401,6 +402,7 @@ static inline const char *cvmx_board_typ
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_ITUS_SHIELD)
-+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E300)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
- 	}
diff --git a/target/linux/octeon/patches-5.10/150-ubnt_usg_support.patch b/target/linux/octeon/patches-5.10/150-ubnt_usg_support.patch
deleted file mode 100644
index 88aa1c406f9b..000000000000
--- a/target/linux/octeon/patches-5.10/150-ubnt_usg_support.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-@@ -296,6 +296,7 @@ enum cvmx_board_types_enum {
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
- 	CVMX_BOARD_TYPE_UBNT_E100 = 20002,
- 	CVMX_BOARD_TYPE_UBNT_E200 = 20003,
-+	CVMX_BOARD_TYPE_UBNT_USG = 20004,
- 	CVMX_BOARD_TYPE_UBNT_E220 = 20005,
- 	CVMX_BOARD_TYPE_ITUS_SHIELD = 20006,
- 	CVMX_BOARD_TYPE_UBNT_E300 = 20300,
-@@ -399,6 +400,7 @@ static inline const char *cvmx_board_typ
- 		    /* Customer private range */
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
-+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_USG)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_ITUS_SHIELD)
---- a/arch/mips/cavium-octeon/octeon-platform.c
-+++ b/arch/mips/cavium-octeon/octeon-platform.c
-@@ -635,6 +635,7 @@ static void __init octeon_rx_tx_delay(in
- 		}
- 		break;
- 	case CVMX_BOARD_TYPE_UBNT_E100:
-+	case CVMX_BOARD_TYPE_UBNT_USG:
- 		if (iface == 0 && port <= 2) {
- 			_octeon_rx_tx_delay(eth, 0x0, 0x10);
- 			return;
---- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-@@ -170,6 +170,7 @@ int cvmx_helper_board_get_mii_address(in
- 		else
- 			return -1;
- 	case CVMX_BOARD_TYPE_UBNT_E100:
-+	case CVMX_BOARD_TYPE_UBNT_USG:
- 		if (ipd_port >= 0 && ipd_port <= 2)
- 			return 7 - ipd_port;
- 		else
-@@ -337,6 +338,7 @@ enum cvmx_helper_board_usb_clock_types _
- 	case CVMX_BOARD_TYPE_LANAI2_G:
- 	case CVMX_BOARD_TYPE_NIC10E_66:
- 	case CVMX_BOARD_TYPE_UBNT_E100:
-+	case CVMX_BOARD_TYPE_UBNT_USG:
- 		return USB_CLOCK_TYPE_CRYSTAL_12;
- 	case CVMX_BOARD_TYPE_NIC10E:
- 		return USB_CLOCK_TYPE_REF_12;
diff --git a/target/linux/octeon/patches-5.10/700-allocate_interface_by_label.patch b/target/linux/octeon/patches-5.10/700-allocate_interface_by_label.patch
deleted file mode 100644
index e4dc3f96e528..000000000000
--- a/target/linux/octeon/patches-5.10/700-allocate_interface_by_label.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Roman Kuzmitskii <damex.pp@icloud.com>
-Date: Wed, 28 Oct 2020 19:00:00 +0000
-Subject: [PATCH] staging: octeon: add net-labels support
-
-With this patch, device name can be set within dts file
-in the same way as dsa port can.
-
-Add label to pip interface node to use this feature:
-label = "lan0";
-
-Tested-by: Johannes Kimmel <fff@bareminimum.eu>
-Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
---- a/drivers/staging/octeon/ethernet.c
-+++ b/drivers/staging/octeon/ethernet.c
-@@ -407,8 +407,12 @@ static int cvm_oct_common_set_mac_addres
- int cvm_oct_common_init(struct net_device *dev)
- {
- 	struct octeon_ethernet *priv = netdev_priv(dev);
-+	const u8 *label = NULL;
- 	int ret;
- 
-+	if (priv->of_node)
-+		label = of_get_property(priv->of_node, "label", NULL);
-+
- 	ret = of_get_mac_address(priv->of_node, dev->dev_addr);
- 	if (ret)
- 		eth_hw_addr_random(dev);
-@@ -441,6 +445,9 @@ int cvm_oct_common_init(struct net_devic
- 	if (dev->netdev_ops->ndo_stop)
- 		dev->netdev_ops->ndo_stop(dev);
- 
-+	if (!IS_ERR_OR_NULL(label))
-+		dev_alloc_name(dev, label);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/octeon/patches-5.10/701-honor_sgmii_node_device_tree_status.patch b/target/linux/octeon/patches-5.10/701-honor_sgmii_node_device_tree_status.patch
deleted file mode 100644
index 4185fcba70d1..000000000000
--- a/target/linux/octeon/patches-5.10/701-honor_sgmii_node_device_tree_status.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Roman Kuzmitskii <damex.pp@icloud.com>
-Date: Sun, 01 Nov 2020 19:00:00 +0000
-Subject: [PATCH] staging: octeon: sgmii to honor disabled dt node status
-
-With this patch, sgmii interface device tree node could be disabled and
-that disabled interface will not be unnecessarily initialized.
-
-It solves the problem with Octeon boards that have 8 sgmii or more ports
-initialized but have nothing connected to them.
-
-Tested-by: Johannes Kimmel <fff@bareminimum.eu>
-Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
---- a/drivers/staging/octeon/ethernet.c
-+++ b/drivers/staging/octeon/ethernet.c
-@@ -880,8 +880,10 @@ static int cvm_oct_probe(struct platform
- 
- 			case CVMX_HELPER_INTERFACE_MODE_SGMII:
- 				priv->phy_mode = PHY_INTERFACE_MODE_SGMII;
--				dev->netdev_ops = &cvm_oct_sgmii_netdev_ops;
--				strscpy(dev->name, "eth%d", sizeof(dev->name));
-+				if (of_device_is_available(priv->of_node)) {
-+					dev->netdev_ops = &cvm_oct_sgmii_netdev_ops;
-+					strscpy(dev->name, "eth%d", sizeof(dev->name));
-+				}
- 				break;
- 
- 			case CVMX_HELPER_INTERFACE_MODE_SPI:
diff --git a/target/linux/omap/config-5.10 b/target/linux/omap/config-5.10
deleted file mode 100644
index c3178b470261..000000000000
--- a/target/linux/omap/config-5.10
+++ /dev/null
@@ -1,678 +0,0 @@
-# CONFIG_AHCI_DM816 is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_AM335X_CONTROL_USB=y
-CONFIG_AM335X_PHY_USB=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_ARCH_OMAP4=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_OMAP2PLUS_CPUFREQ=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_TI_CPUFREQ=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_AT803X_PHY=y
-CONFIG_ATA=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_TPS65217 is not set
-CONFIG_BCH=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CEC_CORE=y
-# CONFIG_CHARGER_TPS65217 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_TI_32K=y
-CONFIG_CLK_TWL6040=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_PALMAS is not set
-# CONFIG_COMMON_CLK_TI_ADPLL is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONNECTOR=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRAMFS=y
-CONFIG_CRC16=y
-CONFIG_CRC7=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_OMAP=y
-CONFIG_CRYPTO_DEV_OMAP_AES=y
-CONFIG_CRYPTO_DEV_OMAP_DES=y
-CONFIG_CRYPTO_DEV_OMAP_SHAM=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ENGINE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DDR=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DM9000=y
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OMAP=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNS_RESOLVER=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_DISPLAY_CONNECTOR=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_OMAP=y
-CONFIG_DRM_OMAP_PANEL_DSI_CM=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_LG_LB035Q02=y
-CONFIG_DRM_PANEL_NEC_NL8048HL11=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y
-CONFIG_DRM_PANEL_SONY_ACX565AKM=y
-CONFIG_DRM_PANEL_TPO_TD028TTEC1=y
-CONFIG_DRM_PANEL_TPO_TD043MTEA1=y
-CONFIG_DRM_SIMPLE_BRIDGE=y
-CONFIG_DRM_TI_TFP410=y
-CONFIG_DRM_TI_TPD12S015=y
-CONFIG_DTC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_EXTCON_PALMAS=y
-CONFIG_EXTCON_USB_GPIO=y
-CONFIG_F2FS_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_FAT_FS=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_OMAP=y
-CONFIG_GPIO_PALMAS=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_PCF857X=y
-# CONFIG_GPIO_TPS65218 is not set
-CONFIG_GPIO_TPS65910=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_GPIO_TWL6040=y
-CONFIG_GRACE_PERIOD=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HDMI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HSI=y
-CONFIG_HSI_BOARDINFO=y
-# CONFIG_HSI_CHAR is not set
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KCMP=y
-CONFIG_KEYS=y
-CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_KS8851=y
-CONFIG_KS8851_MLL=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LIBCRC32C=y
-CONFIG_LIBFDT=y
-CONFIG_LOCKD=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_PALMAS=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MFD_TI_AM335X_TSCADC=y
-CONFIG_MFD_TPS65217=y
-CONFIG_MFD_TPS65218=y
-CONFIG_MFD_TPS65910=y
-CONFIG_MFD_TWL4030_AUDIO=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_OMAP is not set
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_EXTERNAL_DMA=y
-CONFIG_MMC_SDHCI_OMAP=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MSDOS_FS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_BCH=y
-CONFIG_MTD_NAND_OMAP_BCH_BUILD=y
-CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_OOPS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_USE_KERNEL_DNS=y
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OID_REGISTRY=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_DSS_DPI=y
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_OMAP2_DSS_HDMI_COMMON=y
-CONFIG_OMAP2_DSS_INIT=y
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-CONFIG_OMAP3_THERMAL=y
-CONFIG_OMAP4_DSS_HDMI=y
-CONFIG_OMAP4_DSS_HDMI_CEC=y
-CONFIG_OMAP4_THERMAL=y
-CONFIG_OMAP5_DSS_HDMI=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_CONTROL_PHY=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_DSS_BASE=y
-CONFIG_OMAP_GPMC=y
-# CONFIG_OMAP_GPMC_DEBUG is not set
-CONFIG_OMAP_INTERCONNECT=y
-CONFIG_OMAP_INTERCONNECT_BARRIER=y
-CONFIG_OMAP_IRQCHIP=y
-CONFIG_OMAP_OCP2SCP=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_SSI is not set
-CONFIG_OMAP_USB2=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_OPROFILE=y
-CONFIG_OPTPROBES=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_DM816X_USB is not set
-CONFIG_PHY_TI_GMII_SEL=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_PALMAS is not set
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_OPP=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_POWER_AVS_OMAP=y
-CONFIG_POWER_AVS_OMAP_CLASS3=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PROFILING=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-# CONFIG_PWM_OMAP_DMTIMER is not set
-CONFIG_PWM_SYSFS=y
-CONFIG_PWM_TIECAP=y
-CONFIG_PWM_TIEHRPWM=y
-# CONFIG_PWM_TWL is not set
-# CONFIG_PWM_TWL_LED is not set
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUOTA=y
-CONFIG_QUOTACTL=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_QUOTA_TREE=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_PALMAS=y
-CONFIG_REGULATOR_PBIAS=y
-CONFIG_REGULATOR_TI_ABB=y
-CONFIG_REGULATOR_TPS62360=y
-CONFIG_REGULATOR_TPS65023=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_REGULATOR_TPS65217=y
-CONFIG_REGULATOR_TPS65218=y
-CONFIG_REGULATOR_TPS65910=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_ROOT_NFS=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_RTC_DRV_PALMAS=y
-# CONFIG_RTC_DRV_TPS65910 is not set
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_HOST=y
-CONFIG_SCHEDSTATS=y
-CONFIG_SCHED_INFO=y
-CONFIG_SCHED_MC=y
-CONFIG_SCSI=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SDIO_UART=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-CONFIG_SENSORS_GPIO_FAN=y
-CONFIG_SENSORS_LM75=y
-CONFIG_SENSORS_TMP102=y
-CONFIG_SENSORS_TSL2550=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-# CONFIG_SERIAL_8250_OMAP is not set
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
-CONFIG_SERIO=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SG_SPLIT=y
-CONFIG_SKB_EXTENSIONS=y
-CONFIG_SMC91X=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SMSC911X=y
-CONFIG_SMSC_PHY=y
-CONFIG_SND=y
-# CONFIG_SND_COMPRESS_OFFLOAD is not set
-CONFIG_SND_DMAENGINE_PCM=y
-CONFIG_SND_JACK=y
-CONFIG_SND_PCM=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_SIMPLE_CARD_UTILS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_DAVINCI_MCASP=y
-CONFIG_SND_SOC_DMIC=y
-CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_NOKIA_RX51 is not set
-# CONFIG_SND_SOC_OMAP3_PANDORA is not set
-CONFIG_SND_SOC_OMAP3_TWL4030=y
-CONFIG_SND_SOC_OMAP_ABE_TWL6040=y
-CONFIG_SND_SOC_OMAP_DMIC=y
-CONFIG_SND_SOC_OMAP_HDMI=y
-CONFIG_SND_SOC_OMAP_MCBSP=y
-CONFIG_SND_SOC_OMAP_MCPDM=y
-CONFIG_SND_SOC_TI_EDMA_PCM=y
-CONFIG_SND_SOC_TI_SDMA_PCM=y
-CONFIG_SND_SOC_TI_UDMA_PCM=y
-CONFIG_SND_SOC_TLV320AIC3X=y
-CONFIG_SND_SOC_TWL4030=y
-CONFIG_SND_SOC_TWL6040=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SOC_AM33XX=y
-CONFIG_SOC_AM43XX=y
-CONFIG_SOC_BUS=y
-CONFIG_SOC_HAS_OMAP2_SDRC=y
-CONFIG_SOC_OMAP3430=y
-# CONFIG_SOC_TI81XX is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_SPI_TI_QSPI=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_STACKTRACE=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_FAIR_SHARE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TI_CPPI41=y
-CONFIG_TI_CPSW=y
-CONFIG_TI_CPSW_PHY_SEL=y
-CONFIG_TI_CPTS=y
-CONFIG_TI_DAVINCI_EMAC=y
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_TI_DMA_CROSSBAR=y
-CONFIG_TI_EDMA=y
-CONFIG_TI_EMIF=y
-# CONFIG_TI_EMIF_SRAM is not set
-CONFIG_TI_PIPE3=y
-CONFIG_TI_PRUSS_INTC=y
-CONFIG_TI_PWMSS=y
-CONFIG_TI_SOC_THERMAL=y
-CONFIG_TI_SYSC=y
-CONFIG_TI_THERMAL=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TRACE_CLOCK=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_USB=y
-CONFIG_TWL4030_WATCHDOG=y
-# CONFIG_TWL6030_USB is not set
-CONFIG_TWL6040_CORE=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_DUAL_ROLE=y
-# CONFIG_USB_DWC3_GADGET is not set
-# CONFIG_USB_DWC3_HOST is not set
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_OMAP=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-# CONFIG_USB_ETH is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_INVENTRA_DMA=y
-CONFIG_USB_MUSB_AM35X=y
-CONFIG_USB_MUSB_DSPS=y
-CONFIG_USB_MUSB_DUAL_ROLE=y
-# CONFIG_USB_MUSB_GADGET is not set
-CONFIG_USB_MUSB_HDRC=y
-# CONFIG_USB_MUSB_HOST is not set
-CONFIG_USB_MUSB_OMAP2PLUS=y
-CONFIG_USB_MUSB_TUSB6010=y
-CONFIG_USB_PHY=y
-CONFIG_USB_ROLE_SWITCH=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_TI_CPPI41_DMA=y
-CONFIG_USB_TUSB_OMAP_DMA=y
-CONFIG_USE_OF=y
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VIDEOMODE_HELPERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XFRM_ALGO=y
-CONFIG_XFRM_MIGRATE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/pistachio/config-5.10 b/target/linux/pistachio/config-5.10
deleted file mode 100644
index 681607f65c3c..000000000000
--- a/target/linux/pistachio/config-5.10
+++ /dev/null
@@ -1,313 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOARD_SCACHE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MIPS_GIC=y
-CONFIG_CLKSRC_PISTACHIO=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONNECTOR=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRC16=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DWMAC_GENERIC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EARLY_PRINTK_8250=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FIXED_PHY=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_IMG=y
-CONFIG_IMGPDC_WDT=y
-CONFIG_IMG_MDC_DMA=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LIBFDT=y
-CONFIG_LKDTM=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_PISTACHIO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-CONFIG_MIPS_CM=y
-CONFIG_MIPS_CMDLINE_DTB_EXTEND=y
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-# CONFIG_MIPS_CMDLINE_FROM_DTB is not set
-CONFIG_MIPS_CPC=y
-CONFIG_MIPS_CPS=y
-# CONFIG_MIPS_CPS_CPUIDLE is not set
-# CONFIG_MIPS_CPS_NS16550_BOOL is not set
-CONFIG_MIPS_CPS_PM=y
-CONFIG_MIPS_CPU_SCACHE=y
-CONFIG_MIPS_EBPF_JIT=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_EXTERNAL_TIMER=y
-CONFIG_MIPS_GIC=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_MIPS_NO_APPENDED_DTB=y
-CONFIG_MIPS_NR_CPU_NR_MAP=4
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
-# CONFIG_MIPS_RAW_APPENDED_DTB is not set
-CONFIG_MIPS_SPRAM=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_DW=y
-# CONFIG_MMC_DW_BLUEFIELD is not set
-# CONFIG_MMC_DW_EXYNOS is not set
-# CONFIG_MMC_DW_HI3798CV200 is not set
-# CONFIG_MMC_DW_K3 is not set
-CONFIG_MMC_DW_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_SPI_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_NAMESPACES=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_NS=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NLS=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-CONFIG_PAGE_POOL=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PCS_XPCS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHY_PISTACHIO_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_PISTACHIO=y
-CONFIG_PISTACHIO_GPTIMER_CLKSRC=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PROFILING=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-CONFIG_PWM_IMG=y
-CONFIG_PWM_SYSFS=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_PISTACHIO=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_SCHEDSTATS=y
-CONFIG_SCHED_INFO=y
-CONFIG_SCSI=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_SC16IS7XX=y
-CONFIG_SERIAL_SC16IS7XX_CORE=y
-# CONFIG_SERIAL_SC16IS7XX_I2C is not set
-CONFIG_SERIAL_SC16IS7XX_SPI=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-CONFIG_SPI=y
-CONFIG_SPI_IMG_SPFI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STMMAC_SELFTESTS is not set
-CONFIG_SWPHY=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS_CPS=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_RELOCATABLE=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_DUAL_ROLE=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_ROLE_SWITCH=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USER_NS=y
-CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSMALLOC=y
-# CONFIG_ZSMALLOC_STAT is not set
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/pistachio/patches-5.10/101-dmaengine-img-mdc-Handle-early-status-read.patch b/target/linux/pistachio/patches-5.10/101-dmaengine-img-mdc-Handle-early-status-read.patch
deleted file mode 100644
index 031a4e3e5eed..000000000000
--- a/target/linux/pistachio/patches-5.10/101-dmaengine-img-mdc-Handle-early-status-read.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From a2dd154377c9aa6ddda00d39b8c7c334e4fa16ff Mon Sep 17 00:00:00 2001
-From: Damien Horsley <damien.horsley@imgtec.com>
-Date: Tue, 22 Mar 2016 12:46:09 +0000
-Subject: dmaengine: img-mdc: Handle early status read
-
-It is possible that mdc_tx_status may be called before the first
-node has been read from memory.
-
-In this case, the residue value stored in the register is undefined.
-Return the transfer size instead.
-
-Signed-off-by: Damien Horsley <damien.horsley@imgtec.com>
----
- drivers/dma/img-mdc-dma.c | 40 ++++++++++++++++++++++++----------------
- 1 file changed, 24 insertions(+), 16 deletions(-)
-
---- a/drivers/dma/img-mdc-dma.c
-+++ b/drivers/dma/img-mdc-dma.c
-@@ -618,25 +618,33 @@ static enum dma_status mdc_tx_status(str
- 			(MDC_CMDS_PROCESSED_CMDS_DONE_MASK + 1);
- 
- 		/*
--		 * If the command loaded event hasn't been processed yet, then
--		 * the difference above includes an extra command.
-+		 * If the first node has not yet been read from memory,
-+		 * the residue register value is undefined
- 		 */
--		if (!mdesc->cmd_loaded)
--			cmds--;
--		else
--			cmds += mdesc->list_cmds_done;
--
--		bytes = mdesc->list_xfer_size;
--		ldesc = mdesc->list;
--		for (i = 0; i < cmds; i++) {
--			bytes -= ldesc->xfer_size + 1;
--			ldesc = ldesc->next_desc;
--		}
--		if (ldesc) {
--			if (residue != MDC_TRANSFER_SIZE_MASK)
--				bytes -= ldesc->xfer_size - residue;
-+		if (!mdesc->cmd_loaded && !cmds) {
-+			bytes = mdesc->list_xfer_size;
-+		} else {
-+			/*
-+			 * If the command loaded event hasn't been processed yet, then
-+			 * the difference above includes an extra command.
-+			 */
-+			if (!mdesc->cmd_loaded)
-+				cmds--;
- 			else
-+				cmds += mdesc->list_cmds_done;
-+
-+			bytes = mdesc->list_xfer_size;
-+			ldesc = mdesc->list;
-+			for (i = 0; i < cmds; i++) {
- 				bytes -= ldesc->xfer_size + 1;
-+				ldesc = ldesc->next_desc;
-+			}
-+			if (ldesc) {
-+				if (residue != MDC_TRANSFER_SIZE_MASK)
-+					bytes -= ldesc->xfer_size - residue;
-+				else
-+					bytes -= ldesc->xfer_size + 1;
-+			}
- 		}
- 	}
- 	spin_unlock_irqrestore(&mchan->vc.lock, flags);
diff --git a/target/linux/pistachio/patches-5.10/102-spi-img-spfi-Implement-dual-and-quad-mode.patch b/target/linux/pistachio/patches-5.10/102-spi-img-spfi-Implement-dual-and-quad-mode.patch
deleted file mode 100644
index 83f21a5c0a5d..000000000000
--- a/target/linux/pistachio/patches-5.10/102-spi-img-spfi-Implement-dual-and-quad-mode.patch
+++ /dev/null
@@ -1,198 +0,0 @@
-From cd2a6af51553d38072cd31699b58d16ca6176ef5 Mon Sep 17 00:00:00 2001
-From: Ionela Voinescu <ionela.voinescu@imgtec.com>
-Date: Thu, 2 Feb 2017 16:46:14 +0000
-Subject: spi: img-spfi: Implement dual and quad mode
-
-For dual and quad modes to work the SPFI controller needs
-to have information about command/address/dummy bytes in the
-transaction register. This information is not relevant for
-single mode, and therefore it can have any value in the
-allowed range. Therefore, for any read or write transfers of less
-than 8 bytes (cmd = 1 byte, addr up to 7 bytes), SPFI will be
-configured, but not enabled (unless it is the last transfer in
-the queue). The transfer will be enabled by the subsequent tranfer.
-A pending transfer is determined by the content of the transaction
-register: if command part is set and tsize is not.
-
-This way we ensure that for dual and quad transactions
-the command request size will apear in the command/address part
-of the transaction register, while the data size will be in
-tsize, all data being sent/received in the same transaction (as
-set up in the transaction register).
-
-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
----
- drivers/spi/spi-img-spfi.c | 96 ++++++++++++++++++++++++++++++++++++++++------
- 1 file changed, 85 insertions(+), 11 deletions(-)
-
---- a/drivers/spi/spi-img-spfi.c
-+++ b/drivers/spi/spi-img-spfi.c
-@@ -36,7 +36,8 @@
- #define SPFI_CONTROL_SOFT_RESET			BIT(11)
- #define SPFI_CONTROL_SEND_DMA			BIT(10)
- #define SPFI_CONTROL_GET_DMA			BIT(9)
--#define SPFI_CONTROL_SE			BIT(8)
-+#define SPFI_CONTROL_SE				BIT(8)
-+#define SPFI_CONTROL_TX_RX			BIT(1)
- #define SPFI_CONTROL_TMODE_SHIFT		5
- #define SPFI_CONTROL_TMODE_MASK			0x7
- #define SPFI_CONTROL_TMODE_SINGLE		0
-@@ -47,6 +48,10 @@
- #define SPFI_TRANSACTION			0x18
- #define SPFI_TRANSACTION_TSIZE_SHIFT		16
- #define SPFI_TRANSACTION_TSIZE_MASK		0xffff
-+#define SPFI_TRANSACTION_CMD_SHIFT		13
-+#define SPFI_TRANSACTION_CMD_MASK		0x7
-+#define SPFI_TRANSACTION_ADDR_SHIFT		10
-+#define SPFI_TRANSACTION_ADDR_MASK		0x7
- 
- #define SPFI_PORT_STATE				0x1c
- #define SPFI_PORT_STATE_DEV_SEL_SHIFT		20
-@@ -83,6 +88,7 @@
-  */
- #define SPFI_32BIT_FIFO_SIZE			64
- #define SPFI_8BIT_FIFO_SIZE			16
-+#define SPFI_DATA_REQUEST_MAX_SIZE		8
- 
- struct img_spfi {
- 	struct device *dev;
-@@ -99,6 +105,8 @@ struct img_spfi {
- 	struct dma_chan *tx_ch;
- 	bool tx_dma_busy;
- 	bool rx_dma_busy;
-+
-+	bool complete;
- };
- 
- static inline u32 spfi_readl(struct img_spfi *spfi, u32 reg)
-@@ -115,9 +123,11 @@ static inline void spfi_start(struct img
- {
- 	u32 val;
- 
--	val = spfi_readl(spfi, SPFI_CONTROL);
--	val |= SPFI_CONTROL_SPFI_EN;
--	spfi_writel(spfi, val, SPFI_CONTROL);
-+	if (spfi->complete) {
-+		val = spfi_readl(spfi, SPFI_CONTROL);
-+		val |= SPFI_CONTROL_SPFI_EN;
-+		spfi_writel(spfi, val, SPFI_CONTROL);
-+	}
- }
- 
- static inline void spfi_reset(struct img_spfi *spfi)
-@@ -130,12 +140,21 @@ static int spfi_wait_all_done(struct img
- {
- 	unsigned long timeout = jiffies + msecs_to_jiffies(50);
- 
-+	if (!(spfi->complete))
-+		return 0;
-+
- 	while (time_before(jiffies, timeout)) {
- 		u32 status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS);
- 
- 		if (status & SPFI_INTERRUPT_ALLDONETRIG) {
- 			spfi_writel(spfi, SPFI_INTERRUPT_ALLDONETRIG,
- 				    SPFI_INTERRUPT_CLEAR);
-+			/*
-+			 * Disable SPFI for it not to interfere with
-+			 * pending transactions
-+			 */
-+			spfi_writel(spfi, spfi_readl(spfi, SPFI_CONTROL)
-+			& ~SPFI_CONTROL_SPFI_EN, SPFI_CONTROL);
- 			return 0;
- 		}
- 		cpu_relax();
-@@ -441,9 +460,32 @@ static void img_spfi_config(struct spi_m
- 			    struct spi_transfer *xfer)
- {
- 	struct img_spfi *spfi = spi_master_get_devdata(spi->master);
--	u32 val, div;
-+	u32 val, div, transact;
-+	bool is_pending;
- 
- 	/*
-+	 * For read or write transfers of less than 8 bytes (cmd = 1 byte,
-+	 * addr up to 7 bytes), SPFI will be configured, but not enabled
-+	 * (unless it is the last transfer in the queue).The transfer will
-+	 * be enabled by the subsequent transfer.
-+	 * A pending transfer is determined by the content of the
-+	 * transaction register: if command part is set and tsize
-+	 * is not
-+	 */
-+	transact = spfi_readl(spfi, SPFI_TRANSACTION);
-+	is_pending = ((transact >> SPFI_TRANSACTION_CMD_SHIFT) &
-+			SPFI_TRANSACTION_CMD_MASK) &&
-+			(!((transact >> SPFI_TRANSACTION_TSIZE_SHIFT) &
-+			SPFI_TRANSACTION_TSIZE_MASK));
-+
-+	/* If there are no pending transactions it's OK to soft reset */
-+	if (!is_pending) {
-+		/* Start the transaction from a known (reset) state */
-+		spfi_reset(spfi);
-+	}
-+
-+	/*
-+	 * Before anything else, set up parameters.
- 	 * output = spfi_clk * (BITCLK / 512), where BITCLK must be a
- 	 * power of 2 up to 128
- 	 */
-@@ -456,20 +498,52 @@ static void img_spfi_config(struct spi_m
- 	val |= div << SPFI_DEVICE_PARAMETER_BITCLK_SHIFT;
- 	spfi_writel(spfi, val, SPFI_DEVICE_PARAMETER(spi->chip_select));
- 
--	spfi_writel(spfi, xfer->len << SPFI_TRANSACTION_TSIZE_SHIFT,
--		    SPFI_TRANSACTION);
-+	if (!list_is_last(&xfer->transfer_list, &master->cur_msg->transfers) &&
-+		/*
-+		 * For duplex mode (both the tx and rx buffers are !NULL) the
-+		 * CMD, ADDR, and DUMMY byte parts of the transaction register
-+		 * should always be 0 and therefore the pending transfer
-+		 * technique cannot be used.
-+		 */
-+		(xfer->tx_buf) && (!xfer->rx_buf) &&
-+		(xfer->len <= SPFI_DATA_REQUEST_MAX_SIZE) && !is_pending) {
-+		transact = (1 & SPFI_TRANSACTION_CMD_MASK) <<
-+			SPFI_TRANSACTION_CMD_SHIFT;
-+		transact |= ((xfer->len - 1) & SPFI_TRANSACTION_ADDR_MASK) <<
-+			SPFI_TRANSACTION_ADDR_SHIFT;
-+		spfi->complete = false;
-+	} else {
-+		spfi->complete = true;
-+		if (is_pending) {
-+			/* Keep setup from pending transfer */
-+			transact |= ((xfer->len & SPFI_TRANSACTION_TSIZE_MASK) <<
-+				SPFI_TRANSACTION_TSIZE_SHIFT);
-+		} else {
-+			transact = ((xfer->len & SPFI_TRANSACTION_TSIZE_MASK) <<
-+				SPFI_TRANSACTION_TSIZE_SHIFT);
-+		}
-+	}
-+	spfi_writel(spfi, transact, SPFI_TRANSACTION);
- 
- 	val = spfi_readl(spfi, SPFI_CONTROL);
- 	val &= ~(SPFI_CONTROL_SEND_DMA | SPFI_CONTROL_GET_DMA);
--	if (xfer->tx_buf)
-+	/*
-+	 * We set up send DMA for pending transfers also, as
-+	 * those are always send transfers
-+	 */
-+	if ((xfer->tx_buf) || is_pending)
- 		val |= SPFI_CONTROL_SEND_DMA;
--	if (xfer->rx_buf)
-+	if (xfer->tx_buf)
-+		val |= SPFI_CONTROL_TX_RX;
-+	if (xfer->rx_buf) {
- 		val |= SPFI_CONTROL_GET_DMA;
-+		val &= ~SPFI_CONTROL_TX_RX;
-+	}
- 	val &= ~(SPFI_CONTROL_TMODE_MASK << SPFI_CONTROL_TMODE_SHIFT);
--	if (xfer->tx_nbits == SPI_NBITS_DUAL &&
-+	if (xfer->tx_nbits == SPI_NBITS_DUAL ||
- 	    xfer->rx_nbits == SPI_NBITS_DUAL)
- 		val |= SPFI_CONTROL_TMODE_DUAL << SPFI_CONTROL_TMODE_SHIFT;
--	else if (xfer->tx_nbits == SPI_NBITS_QUAD &&
-+	else if (xfer->tx_nbits == SPI_NBITS_QUAD ||
- 		 xfer->rx_nbits == SPI_NBITS_QUAD)
- 		val |= SPFI_CONTROL_TMODE_QUAD << SPFI_CONTROL_TMODE_SHIFT;
- 	val |= SPFI_CONTROL_SE;
diff --git a/target/linux/pistachio/patches-5.10/104-spi-img-spfi-use-device-0-configuration-for-all-devi.patch b/target/linux/pistachio/patches-5.10/104-spi-img-spfi-use-device-0-configuration-for-all-devi.patch
deleted file mode 100644
index 2995b7dd88c5..000000000000
--- a/target/linux/pistachio/patches-5.10/104-spi-img-spfi-use-device-0-configuration-for-all-devi.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 905ee06a9966113fe51d6bad1819759cb30fd0bd Mon Sep 17 00:00:00 2001
-From: Ionela Voinescu <ionela.voinescu@imgtec.com>
-Date: Tue, 9 Feb 2016 10:18:31 +0000
-Subject: spi: img-spfi: use device 0 configuration for all devices
-
-Given that we control the chip select line externally
-we can use only one parameter register (device 0 parameter
-register) and one set of configuration bits (port configuration
-bits for device 0) for all devices (all chip select lines).
-
-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
----
- drivers/spi/spi-img-spfi.c | 23 ++++++++++++++++-------
- 1 file changed, 16 insertions(+), 7 deletions(-)
-
---- a/drivers/spi/spi-img-spfi.c
-+++ b/drivers/spi/spi-img-spfi.c
-@@ -429,18 +429,23 @@ static int img_spfi_prepare(struct spi_m
- 	struct img_spfi *spfi = spi_master_get_devdata(master);
- 	u32 val;
- 
-+	/*
-+	 * The chip select line is controlled externally so
-+	 * we can use the CS0 configuration for all devices
-+	 */
- 	val = spfi_readl(spfi, SPFI_PORT_STATE);
-+
-+	/* 0 for device selection */
- 	val &= ~(SPFI_PORT_STATE_DEV_SEL_MASK <<
- 		 SPFI_PORT_STATE_DEV_SEL_SHIFT);
--	val |= msg->spi->chip_select << SPFI_PORT_STATE_DEV_SEL_SHIFT;
- 	if (msg->spi->mode & SPI_CPHA)
--		val |= SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select);
-+		val |= SPFI_PORT_STATE_CK_PHASE(0);
- 	else
--		val &= ~SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select);
-+		val &= ~SPFI_PORT_STATE_CK_PHASE(0);
- 	if (msg->spi->mode & SPI_CPOL)
--		val |= SPFI_PORT_STATE_CK_POL(msg->spi->chip_select);
-+		val |= SPFI_PORT_STATE_CK_POL(0);
- 	else
--		val &= ~SPFI_PORT_STATE_CK_POL(msg->spi->chip_select);
-+		val &= ~SPFI_PORT_STATE_CK_POL(0);
- 	spfi_writel(spfi, val, SPFI_PORT_STATE);
- 
- 	return 0;
-@@ -492,11 +497,15 @@ static void img_spfi_config(struct spi_m
- 	div = DIV_ROUND_UP(clk_get_rate(spfi->spfi_clk), xfer->speed_hz);
- 	div = clamp(512 / (1 << get_count_order(div)), 1, 128);
- 
--	val = spfi_readl(spfi, SPFI_DEVICE_PARAMETER(spi->chip_select));
-+	/*
-+	 * The chip select line is controlled externally so
-+	 * we can use the CS0 parameters for all devices
-+	 */
-+	val = spfi_readl(spfi, SPFI_DEVICE_PARAMETER(0));
- 	val &= ~(SPFI_DEVICE_PARAMETER_BITCLK_MASK <<
- 		 SPFI_DEVICE_PARAMETER_BITCLK_SHIFT);
- 	val |= div << SPFI_DEVICE_PARAMETER_BITCLK_SHIFT;
--	spfi_writel(spfi, val, SPFI_DEVICE_PARAMETER(spi->chip_select));
-+	spfi_writel(spfi, val, SPFI_DEVICE_PARAMETER(0));
- 
- 	if (!list_is_last(&xfer->transfer_list, &master->cur_msg->transfers) &&
- 		/*
diff --git a/target/linux/pistachio/patches-5.10/105-spi-img-spfi-RX-maximum-burst-size-for-DMA-is-8.patch b/target/linux/pistachio/patches-5.10/105-spi-img-spfi-RX-maximum-burst-size-for-DMA-is-8.patch
deleted file mode 100644
index 541850381621..000000000000
--- a/target/linux/pistachio/patches-5.10/105-spi-img-spfi-RX-maximum-burst-size-for-DMA-is-8.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 56466f505f58f44b69feb7eaed3b506842800456 Mon Sep 17 00:00:00 2001
-From: Ionela Voinescu <ionela.voinescu@imgtec.com>
-Date: Tue, 1 Mar 2016 17:49:45 +0000
-Subject: spi: img-spfi: RX maximum burst size for DMA is 8
-
-The depth of the FIFOs is 16 bytes. The DMA request line is tied
-to the half full/empty (depending on the use of the TX or RX FIFO)
-threshold. For the TX FIFO, if you set a burst size of 8 (equal to
-half the depth) the first burst goes into FIFO without any issues,
-but due the latency involved (the time the data leaves  the DMA
-engine to the time it arrives at the FIFO), the DMA might trigger
-another burst of 8. But given that there is no space for 2 additonal
-bursts of 8, this would result in a failure. Therefore, we have to
-keep the burst size for TX to 4 to accomodate for an extra burst.
-
-For the read (RX) scenario, the DMA request line goes high when
-there is at least 8 entries in the FIFO (half full), and we can
-program the burst size to be 8 because the risk of accidental burst
-does not exist. The DMA engine will not trigger another read until
-the read data for all the burst it has sent out has been received.
-
-While here, move the burst size setting outside of the if/else branches
-as they have the same value for both 8 and 32 bit data widths.
-
-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
----
- drivers/spi/spi-img-spfi.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/spi/spi-img-spfi.c
-+++ b/drivers/spi/spi-img-spfi.c
-@@ -338,12 +338,11 @@ static int img_spfi_start_dma(struct spi
- 		if (xfer->len % 4 == 0) {
- 			rxconf.src_addr = spfi->phys + SPFI_RX_32BIT_VALID_DATA;
- 			rxconf.src_addr_width = 4;
--			rxconf.src_maxburst = 4;
- 		} else {
- 			rxconf.src_addr = spfi->phys + SPFI_RX_8BIT_VALID_DATA;
- 			rxconf.src_addr_width = 1;
--			rxconf.src_maxburst = 4;
- 		}
-+		rxconf.src_maxburst = 8;
- 		dmaengine_slave_config(spfi->rx_ch, &rxconf);
- 
- 		rxdesc = dmaengine_prep_slave_sg(spfi->rx_ch, xfer->rx_sg.sgl,
-@@ -362,12 +361,11 @@ static int img_spfi_start_dma(struct spi
- 		if (xfer->len % 4 == 0) {
- 			txconf.dst_addr = spfi->phys + SPFI_TX_32BIT_VALID_DATA;
- 			txconf.dst_addr_width = 4;
--			txconf.dst_maxburst = 4;
- 		} else {
- 			txconf.dst_addr = spfi->phys + SPFI_TX_8BIT_VALID_DATA;
- 			txconf.dst_addr_width = 1;
--			txconf.dst_maxburst = 4;
- 		}
-+		txconf.dst_maxburst = 4;
- 		dmaengine_slave_config(spfi->tx_ch, &txconf);
- 
- 		txdesc = dmaengine_prep_slave_sg(spfi->tx_ch, xfer->tx_sg.sgl,
diff --git a/target/linux/pistachio/patches-5.10/106-spi-img-spfi-finish-every-transfer-cleanly.patch b/target/linux/pistachio/patches-5.10/106-spi-img-spfi-finish-every-transfer-cleanly.patch
deleted file mode 100644
index ea1f9f28cc73..000000000000
--- a/target/linux/pistachio/patches-5.10/106-spi-img-spfi-finish-every-transfer-cleanly.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From 5fcca3fd4b621d7b5bdeca18d36dfc6ca6cfe383 Mon Sep 17 00:00:00 2001
-From: Ionela Voinescu <ionela.voinescu@imgtec.com>
-Date: Wed, 10 Aug 2016 11:42:26 +0100
-Subject: spi: img-spfi: finish every transfer cleanly
-
-Before this change, the interrupt status bit that signaled
-the end of a tranfers was cleared in the wait_all_done
-function. That functionality triggered issues for DMA
-duplex transactions where the wait function was called
-twice, in both the TX and RX callbacks.
-
-In order to fix the issue, clear all interrupt data bits
-at the end of a PIO transfer or at the end of both TX and RX
-duplex transfers, if the transfer is not a pending tranfer
-(command waiting for data). After that, the status register
-is checked for new incoming data or new data requests to be
-signaled. If SPFI finished cleanly, no new interrupt data
-bits should be set.
-
-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
----
- drivers/spi/spi-img-spfi.c | 49 +++++++++++++++++++++++++++++++++-------------
- 1 file changed, 35 insertions(+), 14 deletions(-)
-
---- a/drivers/spi/spi-img-spfi.c
-+++ b/drivers/spi/spi-img-spfi.c
-@@ -79,6 +79,14 @@
- #define SPFI_INTERRUPT_SDE			BIT(1)
- #define SPFI_INTERRUPT_SDTRIG			BIT(0)
- 
-+#define SPFI_INTERRUPT_DATA_BITS		(SPFI_INTERRUPT_SDHF |\
-+						SPFI_INTERRUPT_SDFUL |\
-+						SPFI_INTERRUPT_GDEX32BIT |\
-+						SPFI_INTERRUPT_GDHF |\
-+						SPFI_INTERRUPT_GDFUL |\
-+						SPFI_INTERRUPT_ALLDONETRIG |\
-+						SPFI_INTERRUPT_GDEX8BIT)
-+
- /*
-  * There are four parallel FIFOs of 16 bytes each.  The word buffer
-  * (*_32BIT_VALID_DATA) accesses all four FIFOs at once, resulting in an
-@@ -136,6 +144,23 @@ static inline void spfi_reset(struct img
- 	spfi_writel(spfi, 0, SPFI_CONTROL);
- }
- 
-+static inline void spfi_finish(struct img_spfi *spfi)
-+{
-+	if (!(spfi->complete))
-+		return;
-+
-+	/* Clear data bits as all transfers(TX and RX) have finished */
-+	spfi_writel(spfi, SPFI_INTERRUPT_DATA_BITS, SPFI_INTERRUPT_CLEAR);
-+	if (spfi_readl(spfi, SPFI_INTERRUPT_STATUS) & SPFI_INTERRUPT_DATA_BITS) {
-+		dev_err(spfi->dev, "SPFI did not finish transfer cleanly.\n");
-+		spfi_reset(spfi);
-+	}
-+	/* Disable SPFI for it not to interfere with pending transactions */
-+	spfi_writel(spfi,
-+		    spfi_readl(spfi, SPFI_CONTROL) & ~SPFI_CONTROL_SPFI_EN,
-+		    SPFI_CONTROL);
-+}
-+
- static int spfi_wait_all_done(struct img_spfi *spfi)
- {
- 	unsigned long timeout = jiffies + msecs_to_jiffies(50);
-@@ -144,19 +169,9 @@ static int spfi_wait_all_done(struct img
- 		return 0;
- 
- 	while (time_before(jiffies, timeout)) {
--		u32 status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS);
--
--		if (status & SPFI_INTERRUPT_ALLDONETRIG) {
--			spfi_writel(spfi, SPFI_INTERRUPT_ALLDONETRIG,
--				    SPFI_INTERRUPT_CLEAR);
--			/*
--			 * Disable SPFI for it not to interfere with
--			 * pending transactions
--			 */
--			spfi_writel(spfi, spfi_readl(spfi, SPFI_CONTROL)
--			& ~SPFI_CONTROL_SPFI_EN, SPFI_CONTROL);
-+		if (spfi_readl(spfi, SPFI_INTERRUPT_STATUS) &
-+		    SPFI_INTERRUPT_ALLDONETRIG)
- 			return 0;
--		}
- 		cpu_relax();
- 	}
- 
-@@ -288,6 +303,8 @@ static int img_spfi_start_pio(struct spi
- 	}
- 
- 	ret = spfi_wait_all_done(spfi);
-+	spfi_finish(spfi);
-+
- 	if (ret < 0)
- 		return ret;
- 
-@@ -303,8 +320,10 @@ static void img_spfi_dma_rx_cb(void *dat
- 
- 	spin_lock_irqsave(&spfi->lock, flags);
- 	spfi->rx_dma_busy = false;
--	if (!spfi->tx_dma_busy)
-+	if (!spfi->tx_dma_busy) {
-+		spfi_finish(spfi);
- 		spi_finalize_current_transfer(spfi->master);
-+	}
- 	spin_unlock_irqrestore(&spfi->lock, flags);
- }
- 
-@@ -317,8 +336,10 @@ static void img_spfi_dma_tx_cb(void *dat
- 
- 	spin_lock_irqsave(&spfi->lock, flags);
- 	spfi->tx_dma_busy = false;
--	if (!spfi->rx_dma_busy)
-+	if (!spfi->rx_dma_busy) {
-+		spfi_finish(spfi);
- 		spi_finalize_current_transfer(spfi->master);
-+	}
- 	spin_unlock_irqrestore(&spfi->lock, flags);
- }
- 
diff --git a/target/linux/pistachio/patches-5.10/108-clk-pistachio-Fix-wrong-SDHost-card-speed.patch b/target/linux/pistachio/patches-5.10/108-clk-pistachio-Fix-wrong-SDHost-card-speed.patch
deleted file mode 100644
index 6fddbe269afc..000000000000
--- a/target/linux/pistachio/patches-5.10/108-clk-pistachio-Fix-wrong-SDHost-card-speed.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 3642843a06025ec333d7e92580cf52cb8db2a652 Mon Sep 17 00:00:00 2001
-From: Govindraj Raja <Govindraj.Raja@imgtec.com>
-Date: Fri, 8 Jan 2016 16:36:07 +0000
-Subject: clk: pistachio: Fix wrong SDHost card speed
-
-The SDHost currently clocks the card 4x slower than it
-should do, because there is fixed divide by 4 in the
-sdhost wrapper that is not present in the clock tree.
-To model this add a fixed divide by 4 clock node in
-the SDHost clock path.
-
-This will ensure the right clock frequency is selected when
-the mmc driver tries to configure frequency on card insert.
-
-Signed-off-by: Govindraj Raja <Govindraj.Raja@imgtec.com>
----
- drivers/clk/pistachio/clk-pistachio.c     | 3 ++-
- include/dt-bindings/clock/pistachio-clk.h | 1 +
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/clk/pistachio/clk-pistachio.c
-+++ b/drivers/clk/pistachio/clk-pistachio.c
-@@ -41,7 +41,7 @@ static struct pistachio_gate pistachio_g
- 	GATE(CLK_AUX_ADC_INTERNAL, "aux_adc_internal", "sys_internal_div",
- 	     0x104, 22),
- 	GATE(CLK_AUX_ADC, "aux_adc", "aux_adc_div", 0x104, 23),
--	GATE(CLK_SD_HOST, "sd_host", "sd_host_div", 0x104, 24),
-+	GATE(CLK_SD_HOST, "sd_host", "sd_host_div4", 0x104, 24),
- 	GATE(CLK_BT, "bt", "bt_div", 0x104, 25),
- 	GATE(CLK_BT_DIV4, "bt_div4", "bt_div4_div", 0x104, 26),
- 	GATE(CLK_BT_DIV8, "bt_div8", "bt_div8_div", 0x104, 27),
-@@ -51,6 +51,7 @@ static struct pistachio_gate pistachio_g
- static struct pistachio_fixed_factor pistachio_ffs[] __initdata = {
- 	FIXED_FACTOR(CLK_WIFI_DIV4, "wifi_div4", "wifi_pll", 4),
- 	FIXED_FACTOR(CLK_WIFI_DIV8, "wifi_div8", "wifi_pll", 8),
-+	FIXED_FACTOR(CLK_SDHOST_DIV4, "sd_host_div4", "sd_host_div", 4),
- };
- 
- static struct pistachio_div pistachio_divs[] __initdata = {
---- a/include/dt-bindings/clock/pistachio-clk.h
-+++ b/include/dt-bindings/clock/pistachio-clk.h
-@@ -18,6 +18,7 @@
- /* Fixed-factor clocks */
- #define CLK_WIFI_DIV4			16
- #define CLK_WIFI_DIV8			17
-+#define CLK_SDHOST_DIV4			18
- 
- /* Gate clocks */
- #define CLK_MIPS			32
diff --git a/target/linux/pistachio/patches-5.10/109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch b/target/linux/pistachio/patches-5.10/109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch
deleted file mode 100644
index cec424a0cec8..000000000000
--- a/target/linux/pistachio/patches-5.10/109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 981c1d416af45eff207227aec106381ac23aac99 Mon Sep 17 00:00:00 2001
-From: Ian Pozella <Ian.Pozella@imgtec.com>
-Date: Mon, 20 Feb 2017 10:00:52 +0000
-Subject: MIPS: DTS: img: marduk: switch mmc to 1 bit mode
-
-The mmc block in Pistachio allows 1 to 8 data bits to be used.
-Marduk uses 4 bits allowing the upper 4 bits to be allocated
-to the Mikrobus ports. However these bits are still connected
-internally meaning the mmc block recieves signals on all data lines
-and seems the internal HW CRC checks get corrupted by this erroneous
-data.
-
-We cannot control what data is sent on these lines because they go
-to external ports. 1 bit mode does not exhibit the issue hence the
-safe default is to use this. If a user knows that in their use case
-they will not use the upper bits then they can set to 4 bit mode in
-order to improve performance.
-
-Also make sure that the upper 4 bits don't get allocated to the mmc
-driver (the default is to assign all 8 pins) so they can be allocated
-to other drivers. Allocating all 4 despite setting 1 bit mode as this
-matches what is there in hardware.
-
-Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com>
----
- arch/mips/boot/dts/img/pistachio_marduk.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/mips/boot/dts/img/pistachio_marduk.dts
-+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
-@@ -117,7 +117,7 @@
- 
- &sdhost {
- 	status = "okay";
--	bus-width = <4>;
-+	bus-width = <1>;
- 	disable-wp;
- };
- 
-@@ -127,6 +127,7 @@
- 
- &pin_sdhost_data {
- 	drive-strength = <2>;
-+	pins = "mfio17", "mfio18", "mfio19", "mfio20";
- };
- 
- &pwm {
diff --git a/target/linux/pistachio/patches-5.10/401-mtd-nor-support-mtd-name-from-device-tree.patch b/target/linux/pistachio/patches-5.10/401-mtd-nor-support-mtd-name-from-device-tree.patch
deleted file mode 100644
index 99985eba40c5..000000000000
--- a/target/linux/pistachio/patches-5.10/401-mtd-nor-support-mtd-name-from-device-tree.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From f32bc2aa01edcba2f2ed5db151cf183eac9ef919 Mon Sep 17 00:00:00 2001
-From: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
-Date: Sat, 25 Feb 2017 16:42:50 +0000
-Subject: mtd: nor: support mtd name from device tree
-
-Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/core.c
-+++ b/drivers/mtd/spi-nor/core.c
-@@ -3152,6 +3152,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	struct device *dev = nor->dev;
- 	struct mtd_info *mtd = &nor->mtd;
- 	struct device_node *np = spi_nor_get_flash_node(nor);
-+	const char __maybe_unused *of_mtd_name = NULL;
- 	int ret;
- 	int i;
- 
-@@ -3206,7 +3207,12 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	if (ret)
- 		return ret;
- 
--	if (!mtd->name)
-+#ifdef CONFIG_MTD_OF_PARTS
-+	of_property_read_string(np, "linux,mtd-name", &of_mtd_name);
-+#endif
-+	if (of_mtd_name)
-+		mtd->name = of_mtd_name;
-+	else if (!mtd->name)
- 		mtd->name = dev_name(dev);
- 	mtd->priv = nor;
- 	mtd->type = MTD_NORFLASH;
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -850,6 +850,17 @@ out_error:
-  */
- static void mtd_set_dev_defaults(struct mtd_info *mtd)
- {
-+#ifdef CONFIG_MTD_OF_PARTS
-+	const char __maybe_unused *of_mtd_name = NULL;
-+	struct device_node *np;
-+
-+	np = mtd_get_of_node(mtd);
-+	if (np && !mtd->name) {
-+		of_property_read_string(np, "linux,mtd-name", &of_mtd_name);
-+		if (of_mtd_name)
-+			mtd->name = of_mtd_name;
-+	} else
-+#endif
- 	if (mtd->dev.parent) {
- 		if (!mtd->owner && mtd->dev.parent->driver)
- 			mtd->owner = mtd->dev.parent->driver->owner;
diff --git a/target/linux/pistachio/patches-5.10/901-MIPS-DTS-img-marduk-Add-SPI-NAND-flash.patch b/target/linux/pistachio/patches-5.10/901-MIPS-DTS-img-marduk-Add-SPI-NAND-flash.patch
deleted file mode 100644
index cd97e38e00bb..000000000000
--- a/target/linux/pistachio/patches-5.10/901-MIPS-DTS-img-marduk-Add-SPI-NAND-flash.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 0023c706f7e0f0f02bd48a63a2f3c04c839532ae Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 15 Aug 2020 16:04:53 +0200
-Subject: [PATCH 901/904] MIPS: DTS: img: marduk: Add SPI NAND flash
-
-Add Gigadevice GD5F4GQ4UCYIGT SPI NAND flash to the device tree.
-
-The NAND flash chip is connected with quad SPI, but reading currently
-fails in quad SPI mode.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/boot/dts/img/pistachio_marduk.dts | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/mips/boot/dts/img/pistachio_marduk.dts
-+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
-@@ -88,6 +88,12 @@
- 		reg = <0>;
- 		spi-max-frequency = <50000000>;
- 	};
-+
-+	flash@1 {
-+		compatible = "spi-nand";
-+		reg = <1>;
-+		spi-max-frequency = <50000000>;
-+	};
- };
- 
- &uart0 {
diff --git a/target/linux/pistachio/patches-5.10/902-MIPS-DTS-img-marduk-Add-Cascoda-CA8210-6LoWPAN.patch b/target/linux/pistachio/patches-5.10/902-MIPS-DTS-img-marduk-Add-Cascoda-CA8210-6LoWPAN.patch
deleted file mode 100644
index af1882e28739..000000000000
--- a/target/linux/pistachio/patches-5.10/902-MIPS-DTS-img-marduk-Add-Cascoda-CA8210-6LoWPAN.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From b7700154d75e8d7c9a2022f09c2d5430137606fa Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 15 Aug 2020 16:05:25 +0200
-Subject: [PATCH 902/904] MIPS: DTS: img: marduk: Add Cascoda CA8210 6LoWPAN
-
-Add Cascoda CA8210 6LoWPAN controller to device tree.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/boot/dts/img/pistachio_marduk.dts | 22 +++++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/mips/boot/dts/img/pistachio_marduk.dts
-+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
-@@ -75,6 +75,28 @@
- 	VDD-supply = <&internal_dac_supply>;
- };
- 
-+&spfi0 {
-+	status = "okay";
-+	pinctrl-0 = <&spim0_pins>, <&spim0_cs0_alt_pin>, <&spim0_cs2_alt_pin>, <&spim0_cs3_alt_pin>, <&spim0_cs4_alt_pin>;
-+	pinctrl-names = "default";
-+
-+	cs-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>, <&gpio0 2 GPIO_ACTIVE_HIGH>,
-+			<&gpio1 12 GPIO_ACTIVE_HIGH>, <&gpio1 13 GPIO_ACTIVE_HIGH>;
-+
-+	ca8210: ca8210@0 {
-+		status = "okay";
-+		compatible = "cascoda,ca8210";
-+		reg = <0>;
-+		spi-max-frequency = <4000000>;
-+		spi-cpol;
-+		reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-+		irq-gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-+		extclock-enable;
-+		extclock-freq = <16000000>;
-+		extclock-gpio = <2>;
-+	};
-+};
-+
- &spfi1 {
- 	status = "okay";
- 
diff --git a/target/linux/pistachio/patches-5.10/903-MIPS-DTS-img-marduk-Add-NXP-SC16IS752IPW.patch b/target/linux/pistachio/patches-5.10/903-MIPS-DTS-img-marduk-Add-NXP-SC16IS752IPW.patch
deleted file mode 100644
index 081465899811..000000000000
--- a/target/linux/pistachio/patches-5.10/903-MIPS-DTS-img-marduk-Add-NXP-SC16IS752IPW.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From ad4eba0c36ce8af6ab9ea1bc163e4c1ac7c271c3 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 15 Aug 2020 16:09:02 +0200
-Subject: [PATCH 903/904] MIPS: DTS: img: marduk: Add NXP SC16IS752IPW
-
-Add NXP SC16IS752IPW SPI-UART controller to device tree.
-
-This controller drives 2 UARTs and 7 LEDs on the board.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/boot/dts/img/pistachio_marduk.dts | 51 +++++++++++++++++++++
- 1 file changed, 51 insertions(+)
-
---- a/arch/mips/boot/dts/img/pistachio_marduk.dts
-+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
-@@ -46,6 +46,46 @@
- 		regulator-max-microvolt = <1800000>;
- 	};
- 
-+	/* EXT clock from ca8210 is fed to sc16is752 */
-+	ca8210_ext_clk: ca8210-ext-clk {
-+		compatible = "fixed-clock";
-+		#clock-cells = <0>;
-+		clock-frequency = <16000000>;
-+		clock-output-names = "ca8210_ext_clock";
-+	};
-+
-+	gpioleds {
-+		compatible = "gpio-leds";
-+		user1 {
-+			label = "marduk:red:user1";
-+			gpios = <&sc16is752 0 GPIO_ACTIVE_LOW>;
-+		};
-+		user2 {
-+			label = "marduk:red:user2";
-+			gpios = <&sc16is752 1 GPIO_ACTIVE_LOW>;
-+		};
-+		user3 {
-+			label = "marduk:red:user3";
-+			gpios = <&sc16is752 2 GPIO_ACTIVE_LOW>;
-+		};
-+		user4 {
-+			label = "marduk:red:user4";
-+			gpios = <&sc16is752 3 GPIO_ACTIVE_LOW>;
-+		};
-+		user5 {
-+			label = "marduk:red:user5";
-+			gpios = <&sc16is752 4 GPIO_ACTIVE_LOW>;
-+		};
-+		user6 {
-+			label = "marduk:red:user6";
-+			gpios = <&sc16is752 5 GPIO_ACTIVE_LOW>;
-+		};
-+		user7 {
-+			label = "marduk:red:user7";
-+			gpios = <&sc16is752 6 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
- 	leds {
- 		compatible = "pwm-leds";
- 		heartbeat {
-@@ -95,6 +135,17 @@
- 		extclock-freq = <16000000>;
- 		extclock-gpio = <2>;
- 	};
-+
-+	sc16is752: sc16is752@1 {
-+		compatible = "nxp,sc16is752";
-+		reg = <1>;
-+		clocks = <&ca8210_ext_clk>;
-+		spi-max-frequency = <4000000>;
-+		interrupt-parent = <&gpio0>;
-+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+	};
- };
- 
- &spfi1 {
diff --git a/target/linux/pistachio/patches-5.10/904-MIPS-DTS-img-marduk-Add-partition-name.patch b/target/linux/pistachio/patches-5.10/904-MIPS-DTS-img-marduk-Add-partition-name.patch
deleted file mode 100644
index ce41c67461b6..000000000000
--- a/target/linux/pistachio/patches-5.10/904-MIPS-DTS-img-marduk-Add-partition-name.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From ff0e950b605047bf50d470023e0fb2fc2003a0f0 Mon Sep 17 00:00:00 2001
-From: Ian Pozella <Ian.Pozella@imgtec.com>
-Date: Mon, 20 Feb 2017 10:38:07 +0000
-Subject: [PATCH 904/904] MIPS: DTS: img: marduk: Add partition name
-
-Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com>
----
- arch/mips/boot/dts/img/pistachio_marduk.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/boot/dts/img/pistachio_marduk.dts
-+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
-@@ -160,12 +160,14 @@
- 		compatible = "spansion,s25fl016k", "jedec,spi-nor";
- 		reg = <0>;
- 		spi-max-frequency = <50000000>;
-+		linux,mtd-name = "spi-nor";
- 	};
- 
- 	flash@1 {
- 		compatible = "spi-nand";
- 		reg = <1>;
- 		spi-max-frequency = <50000000>;
-+		linux,mtd-name = "spi-nand";
- 	};
- };
- 
diff --git a/target/linux/pistachio/patches-5.10/905-MIPS-DTS-img-marduk-Add-led-aliases.patch b/target/linux/pistachio/patches-5.10/905-MIPS-DTS-img-marduk-Add-led-aliases.patch
deleted file mode 100644
index c6cf5acbb8ec..000000000000
--- a/target/linux/pistachio/patches-5.10/905-MIPS-DTS-img-marduk-Add-led-aliases.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/boot/dts/img/pistachio_marduk.dts
-+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
-@@ -19,6 +19,11 @@
- 		ethernet0 = &enet;
- 		spi0 = &spfi0;
- 		spi1 = &spfi1;
-+
-+		led-boot = &led_heartbeat;
-+		led-failsafe = &led_heartbeat;
-+		led-running = &led_heartbeat;
-+		led-upgrade = &led_heartbeat;
- 	};
- 
- 	chosen {
-@@ -88,11 +93,10 @@
- 
- 	leds {
- 		compatible = "pwm-leds";
--		heartbeat {
-+		led_heartbeat: heartbeat {
- 			label = "marduk:red:heartbeat";
- 			pwms = <&pwm 3 300000>;
- 			max-brightness = <255>;
--			linux,default-trigger = "heartbeat";
- 		};
- 	};
- 
diff --git a/target/linux/ramips/mt7620/config-5.10 b/target/linux/ramips/mt7620/config-5.10
deleted file mode 100644
index 4ee113facdce..000000000000
--- a/target/linux/ramips/mt7620/config-5.10
+++ /dev/null
@@ -1,197 +0,0 @@
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_SYSTICK_QUIRK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_RT3352=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7620A_EVAL is not set
-# CONFIG_DTB_OMEGA2P is not set
-CONFIG_DTB_RT_NONE=y
-# CONFIG_DTB_VOCORE2 is not set
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-# CONFIG_GPIO_MT7621 is not set
-CONFIG_GPIO_RALINK=y
-CONFIG_GPIO_WATCHDOG=y
-# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MT7621_WDT is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_PARSER_TPLINK_SAFELOADER is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPLIT_JIMAGE_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_VIRT_CONCAT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_GSW_MT7620=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NET_RALINK_MDIO_MT7620=y
-CONFIG_NET_RALINK_MT7620=y
-# CONFIG_NET_RALINK_RT3050 is not set
-CONFIG_NET_RALINK_SOC=y
-# CONFIG_NET_VENDOR_MEDIATEK is not set
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-# CONFIG_PCI_MT7621 is not set
-# CONFIG_PCI_MT7621_PHY is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_AW9523 is not set
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_WDT=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/ramips/mt7621/config-5.10 b/target/linux/ramips/mt7621/config-5.10
deleted file mode 100644
index 8c077d211d44..000000000000
--- a/target/linux/ramips/mt7621/config-5.10
+++ /dev/null
@@ -1,294 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_AT803X_PHY=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOARD_SCACHE=y
-CONFIG_BOUNCE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MIPS_GIC=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_IDLE=y
-# CONFIG_CPU_IDLE_GOV_LADDER is not set
-CONFIG_CPU_IDLE_GOV_TEO=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DIMLIB=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_GNUBEE1 is not set
-# CONFIG_DTB_GNUBEE2 is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MT7621=y
-# CONFIG_GPIO_RALINK is not set
-CONFIG_GPIO_WATCHDOG=y
-# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HIGHMEM=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_MT7621=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LED_TRIGGER_PHY=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEDIATEK_GE_PHY=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIKROTIK=y
-CONFIG_MIKROTIK_RB_SYSFS=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-CONFIG_MIPS_CM=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-CONFIG_MIPS_CPC=y
-CONFIG_MIPS_CPS=y
-CONFIG_MIPS_CPS_CPUIDLE=y
-# CONFIG_MIPS_CPS_NS16550_BOOL is not set
-CONFIG_MIPS_CPS_PM=y
-CONFIG_MIPS_CPU_SCACHE=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_GIC=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_NR_CPU_NR_MAP=4
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_WDT=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_MT7621=y
-CONFIG_MTD_NAND_MTK_BMT=y
-# CONFIG_MTD_PARSER_TPLINK_SAFELOADER is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_ROUTERBOOT_PARTS=y
-CONFIG_MTD_SERCOMM_PARTS=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MTD_SPLIT_MINOR_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_TRX_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_VIRT_CONCAT=y
-# CONFIG_MTK_HSDMA is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MT7530=y
-CONFIG_NET_DSA_TAG_MTK=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NET_VENDOR_MEDIATEK=y
-# CONFIG_NET_VENDOR_RALINK is not set
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_DRIVERS_GENERIC=y
-CONFIG_PCI_MT7621=y
-CONFIG_PCI_MT7621_PHY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_RALINK_USB is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_AW9523=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_SX150X=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RALINK=y
-# CONFIG_RALINK_WDT is not set
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_BQ32K=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_SCHED_SMT=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-CONFIG_SOC_BUS=y
-# CONFIG_SOC_MT7620 is not set
-CONFIG_SOC_MT7621=y
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_MT7621=y
-# CONFIG_SPI_RT2880 is not set
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_MIPS_CPS=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_WEAK_REORDERING_BEYOND_LLSC=y
-CONFIG_XPS=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/ramips/mt76x8/config-5.10 b/target/linux/ramips/mt76x8/config-5.10
deleted file mode 100644
index 514c67461578..000000000000
--- a/target/linux/ramips/mt76x8/config-5.10
+++ /dev/null
@@ -1,194 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_AT803X_PHY=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_SYSTICK_QUIRK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_RT3352=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7620A_EVAL is not set
-# CONFIG_DTB_OMEGA2P is not set
-CONFIG_DTB_RT_NONE=y
-# CONFIG_DTB_VOCORE2 is not set
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MT7621=y
-# CONFIG_GPIO_RALINK is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_WDT=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_PARSER_TPLINK_SAFELOADER is not set
-CONFIG_MTD_PARSER_TRX=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_VIRT_CONCAT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_ESW_RT3050=y
-# CONFIG_NET_RALINK_MT7620 is not set
-CONFIG_NET_RALINK_RT3050=y
-CONFIG_NET_RALINK_SOC=y
-# CONFIG_NET_VENDOR_MEDIATEK is not set
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-# CONFIG_PCI_MT7621 is not set
-# CONFIG_PCI_MT7621_PHY is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_AW9523 is not set
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-# CONFIG_RALINK_WDT is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_MT7621=y
-# CONFIG_SPI_RT2880 is not set
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/ramips/patches-5.10/020-mips-ralink-manage-low-reset-lines.patch b/target/linux/ramips/patches-5.10/020-mips-ralink-manage-low-reset-lines.patch
deleted file mode 100644
index bdf98f223cbf..000000000000
--- a/target/linux/ramips/patches-5.10/020-mips-ralink-manage-low-reset-lines.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 3f9ef7785a9cd69cb75f5e2ea4ca79a24752e496 Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Wed, 3 Feb 2021 10:21:41 +0100
-Subject: MIPS: ralink: manage low reset lines
-
-Reset lines with indices smaller than 8 are currently considered invalid
-by the rt2880-reset reset controller.
-
-The MT7621 SoC uses a number of these low reset lines. The DTS defines
-reset lines "hsdma", "fe", and "mcm" with respective values 5, 6, and 2.
-As a result of the above restriction, these resets cannot be asserted or
-de-asserted by the reset controller. In cases where the bootloader does
-not de-assert these lines, this results in e.g. the MT7621's internal
-switch staying in reset.
-
-Change the reset controller to only ignore the system reset, so all
-reset lines with index greater than 0 are considered valid.
-
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-Acked-by: John Crispin <john@phrozen.org>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/ralink/reset.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ralink/reset.c
-+++ b/arch/mips/ralink/reset.c
-@@ -27,7 +27,7 @@ static int ralink_assert_device(struct r
- {
- 	u32 val;
- 
--	if (id < 8)
-+	if (id == 0)
- 		return -1;
- 
- 	val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
-@@ -42,7 +42,7 @@ static int ralink_deassert_device(struct
- {
- 	u32 val;
- 
--	if (id < 8)
-+	if (id == 0)
- 		return -1;
- 
- 	val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
diff --git a/target/linux/ramips/patches-5.10/108-PCI-mt7621-Delay-phy-ports-initialization.patch b/target/linux/ramips/patches-5.10/108-PCI-mt7621-Delay-phy-ports-initialization.patch
deleted file mode 100644
index ef03b00444be..000000000000
--- a/target/linux/ramips/patches-5.10/108-PCI-mt7621-Delay-phy-ports-initialization.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 0cb2a8f3456ff1cc51d571e287a48e8fddc98ec2 Mon Sep 17 00:00:00 2001
-From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
-Date: Sat, 31 Dec 2022 08:40:41 +0100
-Subject: PCI: mt7621: Delay phy ports initialization
-
-Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need
-to delay phy port initialization after calling the mt7621_pcie_init_port()
-driver function to get into reliable boots for both warm and hard resets.
-
-The delay required to detect the ports seems to be in the range [75-100]
-milliseconds.
-
-If the ports are not detected the controller is not functional.
-
-There is no datasheet or something similar to really understand why this
-extra delay is needed only for these devices and it is not for most of
-the boards that are built on mt7621 SoC.
-
-This issue has been reported by openWRT community and the complete
-discussion is in [0]. The 100 milliseconds delay has been tested in all
-devices to validate it.
-
-Add the extra 100 milliseconds delay to fix the issue.
-
-[0]: https://github.com/openwrt/openwrt/pull/11220
-
-Link: https://lore.kernel.org/r/20221231074041.264738-1-sergio.paracuellos@gmail.com
-Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver")
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
-Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
----
- drivers/staging/mt7621-pci/pci-mt7621.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/staging/mt7621-pci/pci-mt7621.c
-+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
-@@ -86,6 +86,7 @@
- #define MEMORY_BASE			0x0
- #define PERST_MODE_MASK			GENMASK(11, 10)
- #define PERST_MODE_GPIO			BIT(10)
-+#define INIT_PORTS_DELAY_MS		100
- #define PERST_DELAY_MS			100
- 
- /**
-@@ -521,6 +522,7 @@ static void mt7621_pcie_init_ports(struc
- 		}
- 	}
- 
-+	msleep(INIT_PORTS_DELAY_MS);
- 	mt7621_pcie_reset_ep_deassert(pcie);
- 
- 	tmp = NULL;
diff --git a/target/linux/ramips/patches-5.10/200-add-ralink-eth.patch b/target/linux/ramips/patches-5.10/200-add-ralink-eth.patch
deleted file mode 100644
index 90ba6e6c5725..000000000000
--- a/target/linux/ramips/patches-5.10/200-add-ralink-eth.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -159,6 +159,7 @@ source "drivers/net/ethernet/pasemi/Kcon
- source "drivers/net/ethernet/pensando/Kconfig"
- source "drivers/net/ethernet/qlogic/Kconfig"
- source "drivers/net/ethernet/qualcomm/Kconfig"
-+source "drivers/net/ethernet/ralink/Kconfig"
- source "drivers/net/ethernet/rdc/Kconfig"
- source "drivers/net/ethernet/realtek/Kconfig"
- source "drivers/net/ethernet/renesas/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -71,6 +71,7 @@ obj-$(CONFIG_NET_VENDOR_PACKET_ENGINES)
- obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
- obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
- obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/
-+obj-$(CONFIG_NET_VENDOR_RALINK) += ralink/
- obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
- obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
diff --git a/target/linux/ramips/patches-5.10/201-MIPS-ralink-rt288x-select-MIPS_AUTO_PFN_OFFSET.patch b/target/linux/ramips/patches-5.10/201-MIPS-ralink-rt288x-select-MIPS_AUTO_PFN_OFFSET.patch
deleted file mode 100644
index 2b6bfd2b7b4e..000000000000
--- a/target/linux/ramips/patches-5.10/201-MIPS-ralink-rt288x-select-MIPS_AUTO_PFN_OFFSET.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Date: Sat, 3 Apr 2021 18:51:44 -0700
-Subject: [PATCH] MIPS: ralink: rt288x: select MIPS_AUTO_PFN_OFFSET
-
-RT288X systems may have a non-zero ramstart causing problems with memory
-reservations and boot hangs, as well as messages like:
-  Wasting 1048576 bytes for tracking 32768 unused pages
-
-Both are alleviated by selecting MIPS_AUTO_PFN_OFFSET for such
-platforms.
-
-Tested on a Belkin F5D8235 v1 RT2880 device.
-
-Link: https://lore.kernel.org/linux-mips/20180820233111.xww5232dxbuouf4n@pburton-laptop/
-
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Cc: Mike Rapoport <rppt@kernel.org>
----
- arch/mips/ralink/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -26,6 +26,7 @@ choice
- 
- 	config SOC_RT288X
- 		bool "RT288x"
-+		select MIPS_AUTO_PFN_OFFSET
- 		select MIPS_L1_CACHE_SHIFT_4
- 		select HAVE_LEGACY_CLK
- 		select HAVE_PCI
diff --git a/target/linux/ramips/patches-5.10/203-staging-mt7621-pci-phy-kconfig-select-regmap-mmio.patch b/target/linux/ramips/patches-5.10/203-staging-mt7621-pci-phy-kconfig-select-regmap-mmio.patch
deleted file mode 100644
index e6c5db4db74d..000000000000
--- a/target/linux/ramips/patches-5.10/203-staging-mt7621-pci-phy-kconfig-select-regmap-mmio.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/staging/mt7621-pci-phy/Kconfig
-+++ b/drivers/staging/mt7621-pci-phy/Kconfig
-@@ -3,6 +3,7 @@ config PCI_MT7621_PHY
- 	tristate "MediaTek MT7621 PCI PHY Driver"
- 	depends on RALINK && OF
- 	select GENERIC_PHY
-+	select REGMAP_MMIO
- 	help
- 	  Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver,
- 
diff --git a/target/linux/ramips/patches-5.10/300-mt7620-export-chip-version-and-pkg.patch b/target/linux/ramips/patches-5.10/300-mt7620-export-chip-version-and-pkg.patch
deleted file mode 100644
index 8b4335eb03c3..000000000000
--- a/target/linux/ramips/patches-5.10/300-mt7620-export-chip-version-and-pkg.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -135,4 +135,16 @@ static inline int mt7620_get_eco(void)
- 	return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
- }
- 
-+static inline int mt7620_get_chipver(void)
-+{
-+	return (rt_sysc_r32(SYSC_REG_CHIP_REV) >> CHIP_REV_VER_SHIFT) &
-+		CHIP_REV_VER_MASK;
-+}
-+
-+static inline int mt7620_get_pkg(void)
-+{
-+	return (rt_sysc_r32(SYSC_REG_CHIP_REV) >> CHIP_REV_PKG_SHIFT) &
-+		CHIP_REV_PKG_MASK;
-+}
-+
- #endif
diff --git a/target/linux/ramips/patches-5.10/311-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-5.10/311-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
deleted file mode 100644
index a0b81bc6c511..000000000000
--- a/target/linux/ramips/patches-5.10/311-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From ce3d4a4111a5f7e6b4e74bceae5faa6ce388e8ec Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 14 Jul 2013 23:08:11 +0200
-Subject: [PATCH 05/53] MIPS: use set_mode() to enable/disable the cevt-r4k
- irq
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Kconfig |    5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -1,12 +1,17 @@
- # SPDX-License-Identifier: GPL-2.0
- if RALINK
- 
-+config CEVT_SYSTICK_QUIRK
-+	bool
-+	default n
-+
- config CLKEVT_RT3352
- 	bool
- 	depends on SOC_RT305X || SOC_MT7620
- 	default y
- 	select TIMER_OF
- 	select CLKSRC_MMIO
-+	select CEVT_SYSTICK_QUIRK
- 
- config RALINK_ILL_ACC
- 	bool
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -16,6 +16,31 @@
- #include <asm/time.h>
- #include <asm/cevt-r4k.h>
- 
-+#ifdef CONFIG_CEVT_SYSTICK_QUIRK
-+static int mips_state_oneshot(struct clock_event_device *evt)
-+{
-+	unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
-+	if (!cp0_timer_irq_installed) {
-+		cp0_timer_irq_installed = 1;
-+		if (request_irq(evt->irq, c0_compare_interrupt, flags, "timer",
-+					c0_compare_interrupt))
-+			pr_err("Failed to request irq %d (timer)\n", evt->irq);
-+	}
-+
-+	return 0;
-+}
-+
-+static int mips_state_shutdown(struct clock_event_device *evt)
-+{
-+	if (cp0_timer_irq_installed) {
-+		cp0_timer_irq_installed = 0;
-+		free_irq(evt->irq, NULL);
-+	}
-+
-+	return 0;
-+}
-+#endif
-+
- static int mips_next_event(unsigned long delta,
- 			   struct clock_event_device *evt)
- {
-@@ -296,7 +321,9 @@ core_initcall(r4k_register_cpufreq_notif
- 
- int r4k_clockevent_init(void)
- {
-+#ifndef CONFIG_CEVT_SYSTICK_QUIRK
- 	unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
-+#endif
- 	unsigned int cpu = smp_processor_id();
- 	struct clock_event_device *cd;
- 	unsigned int irq, min_delta;
-@@ -326,11 +353,16 @@ int r4k_clockevent_init(void)
- 	cd->rating		= 300;
- 	cd->irq			= irq;
- 	cd->cpumask		= cpumask_of(cpu);
-+#ifdef CONFIG_CEVT_SYSTICK_QUIRK
-+	cd->set_state_shutdown	= mips_state_shutdown;
-+	cd->set_state_oneshot	= mips_state_oneshot;
-+#endif
- 	cd->set_next_event	= mips_next_event;
- 	cd->event_handler	= mips_event_handler;
- 
- 	clockevents_config_and_register(cd, mips_hpt_frequency, min_delta, 0x7fffffff);
- 
-+#ifndef CONFIG_CEVT_SYSTICK_QUIRK
- 	if (cp0_timer_irq_installed)
- 		return 0;
- 
-@@ -339,6 +371,7 @@ int r4k_clockevent_init(void)
- 	if (request_irq(irq, c0_compare_interrupt, flags, "timer",
- 			c0_compare_interrupt))
- 		pr_err("Failed to request irq %d (timer)\n", irq);
-+#endif
- 
- 	return 0;
- }
diff --git a/target/linux/ramips/patches-5.10/312-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-5.10/312-MIPS-ralink-add-cpu-frequency-scaling.patch
deleted file mode 100644
index 0d70770941ec..000000000000
--- a/target/linux/ramips/patches-5.10/312-MIPS-ralink-add-cpu-frequency-scaling.patch
+++ /dev/null
@@ -1,195 +0,0 @@
-From bd30f19a006fb52bac80c6463c49dd2f4159f4ac Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 16:26:41 +0200
-Subject: [PATCH 06/53] MIPS: ralink: add cpu frequency scaling
-
-This feature will break udelay() and cause the delay loop to have longer delays
-when the frequency is scaled causing a performance hit.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/cevt-rt3352.c |   38 ++++++++++++++++++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
---- a/arch/mips/ralink/cevt-rt3352.c
-+++ b/arch/mips/ralink/cevt-rt3352.c
-@@ -29,6 +29,10 @@
- /* enable the counter */
- #define CFG_CNT_EN		0x1
- 
-+/* mt7620 frequency scaling defines */
-+#define CLK_LUT_CFG	0x40
-+#define SLEEP_EN	BIT(31)
-+
- struct systick_device {
- 	void __iomem *membase;
- 	struct clock_event_device dev;
-@@ -36,21 +40,53 @@ struct systick_device {
- 	int freq_scale;
- };
- 
-+static void (*systick_freq_scaling)(struct systick_device *sdev, int status);
-+
- static int systick_set_oneshot(struct clock_event_device *evt);
- static int systick_shutdown(struct clock_event_device *evt);
- 
-+static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
-+{
-+	if (sdev->freq_scale == status)
-+		return;
-+
-+	sdev->freq_scale = status;
-+
-+	pr_info("%s: %s autosleep mode\n", sdev->dev.name,
-+			(status) ? ("enable") : ("disable"));
-+	if (status)
-+		rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
-+	else
-+		rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
-+}
-+
-+static inline unsigned int read_count(struct systick_device *sdev)
-+{
-+	return ioread32(sdev->membase + SYSTICK_COUNT);
-+}
-+
-+static inline unsigned int read_compare(struct systick_device *sdev)
-+{
-+	return ioread32(sdev->membase + SYSTICK_COMPARE);
-+}
-+
-+static inline void write_compare(struct systick_device *sdev, unsigned int val)
-+{
-+	iowrite32(val, sdev->membase + SYSTICK_COMPARE);
-+}
-+
- static int systick_next_event(unsigned long delta,
- 				struct clock_event_device *evt)
- {
- 	struct systick_device *sdev;
--	u32 count;
-+	int res;
- 
- 	sdev = container_of(evt, struct systick_device, dev);
--	count = ioread32(sdev->membase + SYSTICK_COUNT);
--	count = (count + delta) % SYSTICK_FREQ;
--	iowrite32(count, sdev->membase + SYSTICK_COMPARE);
-+	delta += read_count(sdev);
-+	write_compare(sdev, delta);
-+	res = ((int)(read_count(sdev) - delta) >= 0) ? -ETIME : 0;
- 
--	return 0;
-+	return res;
- }
- 
- static void systick_event_handler(struct clock_event_device *dev)
-@@ -60,20 +96,25 @@ static void systick_event_handler(struct
- 
- static irqreturn_t systick_interrupt(int irq, void *dev_id)
- {
--	struct clock_event_device *dev = (struct clock_event_device *) dev_id;
-+	int ret = 0;
-+	struct clock_event_device *cdev;
-+	struct systick_device *sdev;
- 
--	dev->event_handler(dev);
-+	if (read_c0_cause() & STATUSF_IP7) {
-+		cdev = (struct clock_event_device *) dev_id;
-+		sdev = container_of(cdev, struct systick_device, dev);
-+
-+		/* Clear Count/Compare Interrupt */
-+		write_compare(sdev, read_compare(sdev));
-+		cdev->event_handler(cdev);
-+		ret = 1;
-+	}
- 
--	return IRQ_HANDLED;
-+	return IRQ_RETVAL(ret);
- }
- 
- static struct systick_device systick = {
- 	.dev = {
--		/*
--		 * cevt-r4k uses 300, make sure systick
--		 * gets used if available
--		 */
--		.rating			= 310,
- 		.features		= CLOCK_EVT_FEAT_ONESHOT,
- 		.set_next_event		= systick_next_event,
- 		.set_state_shutdown	= systick_shutdown,
-@@ -91,7 +132,13 @@ static int systick_shutdown(struct clock
- 	if (sdev->irq_requested)
- 		free_irq(systick.dev.irq, &systick.dev);
- 	sdev->irq_requested = 0;
--	iowrite32(0, systick.membase + SYSTICK_CONFIG);
-+	iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
-+
-+	if (systick_freq_scaling)
-+		systick_freq_scaling(sdev, 0);
-+
-+	if (systick_freq_scaling)
-+		systick_freq_scaling(sdev, 1);
- 
- 	return 0;
- }
-@@ -116,33 +163,46 @@ static int systick_set_oneshot(struct cl
- 	return 0;
- }
- 
-+static const struct of_device_id systick_match[] = {
-+	{ .compatible = "ralink,mt7620a-systick", .data = mt7620_freq_scaling},
-+	{},
-+};
-+
- static int __init ralink_systick_init(struct device_node *np)
- {
--	int ret;
-+	const struct of_device_id *match;
-+	int rating = 200;
- 
- 	systick.membase = of_iomap(np, 0);
- 	if (!systick.membase)
- 		return -ENXIO;
- 
--	systick.dev.name = np->name;
--	clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
--	systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
--	systick.dev.max_delta_ticks = 0x7fff;
--	systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
--	systick.dev.min_delta_ticks = 0x3;
-+	match = of_match_node(systick_match, np);
-+	if (match) {
-+		systick_freq_scaling = match->data;
-+		/*
-+		 * cevt-r4k uses 300, make sure systick
-+		 * gets used if available
-+		 */
-+		rating = 310;
-+	}
-+
-+	/* enable counter than register clock source */
-+	iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
-+	clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
-+			SYSTICK_FREQ, rating, 16, clocksource_mmio_readl_up);
-+
-+	/* register clock event */
- 	systick.dev.irq = irq_of_parse_and_map(np, 0);
- 	if (!systick.dev.irq) {
- 		pr_err("%pOFn: request_irq failed", np);
- 		return -EINVAL;
- 	}
- 
--	ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
--				    SYSTICK_FREQ, 301, 16,
--				    clocksource_mmio_readl_up);
--	if (ret)
--		return ret;
--
--	clockevents_register_device(&systick.dev);
-+	systick.dev.name = np->name;
-+	systick.dev.rating = rating;
-+	systick.dev.cpumask = cpumask_of(0);
-+	clockevents_config_and_register(&systick.dev, SYSTICK_FREQ, 0x3, 0x7fff);
- 
- 	pr_info("%pOFn: running - mult: %d, shift: %d\n",
- 			np, systick.dev.mult, systick.dev.shift);
diff --git a/target/linux/ramips/patches-5.10/314-MIPS-add-bootargs-override-property.patch b/target/linux/ramips/patches-5.10/314-MIPS-add-bootargs-override-property.patch
deleted file mode 100644
index a5df046ba745..000000000000
--- a/target/linux/ramips/patches-5.10/314-MIPS-add-bootargs-override-property.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From f15d27f9c90ede4b16eb37f9ae573ef81c2b6996 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Thu, 31 Dec 2020 18:49:12 +0100
-Subject: [PATCH] MIPS: add bootargs-override property
-
-Add support for the bootargs-override property to the chosen node
-similar to the one used on ipq806x or mpc85xx.
-
-This is necessary, as the U-Boot used on some boards, notably the
-Ubiquiti UniFi 6 Lite, overwrite the bootargs property of the chosen
-node leading to a kernel panic when loading OpenWrt.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/mips/kernel/setup.c | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/arch/mips/kernel/setup.c
-+++ b/arch/mips/kernel/setup.c
-@@ -542,8 +542,28 @@ static int __init bootcmdline_scan_chose
- 
- #endif /* CONFIG_OF_EARLY_FLATTREE */
- 
-+static int __init bootcmdline_scan_chosen_override(unsigned long node, const char *uname,
-+						   int depth, void *data)
-+{
-+	bool *dt_bootargs = data;
-+	const char *p;
-+	int l;
-+
-+	if (depth != 1 || !data || strcmp(uname, "chosen") != 0)
-+		return 0;
-+
-+	p = of_get_flat_dt_prop(node, "bootargs-override", &l);
-+	if (p != NULL && l > 0) {
-+		strlcpy(boot_command_line, p, COMMAND_LINE_SIZE);
-+		*dt_bootargs = true;
-+	}
-+
-+	return 1;
-+}
-+
- static void __init bootcmdline_init(void)
- {
-+	bool dt_bootargs_override = false;
- 	bool dt_bootargs = false;
- 
- 	/*
-@@ -557,6 +577,14 @@ static void __init bootcmdline_init(void
- 	}
- 
- 	/*
-+	 * If bootargs-override in the chosen node is set, use this as the
-+	 * command line
-+	 */
-+	of_scan_flat_dt(bootcmdline_scan_chosen_override, &dt_bootargs_override);
-+	if (dt_bootargs_override)
-+		return;
-+
-+	/*
- 	 * If the user specified a built-in command line &
- 	 * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is
- 	 * prepended to arguments from the bootloader or DT so we'll copy them
diff --git a/target/linux/ramips/patches-5.10/315-owrt-hack-fix-mt7688-cache-issue.patch b/target/linux/ramips/patches-5.10/315-owrt-hack-fix-mt7688-cache-issue.patch
deleted file mode 100644
index 59d4b3ce564f..000000000000
--- a/target/linux/ramips/patches-5.10/315-owrt-hack-fix-mt7688-cache-issue.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 5ede027f6c4a57ed25da872420508b7f1168b36b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:15:32 +0100
-Subject: [PATCH 13/53] owrt: hack: fix mt7688 cache issue
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/kernel/setup.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/kernel/setup.c
-+++ b/arch/mips/kernel/setup.c
-@@ -694,8 +694,6 @@ static void __init arch_mem_init(char **
- 	if (crashk_res.start != crashk_res.end)
- 		memblock_reserve(crashk_res.start, resource_size(&crashk_res));
- #endif
--	device_tree_init();
--
- 	/*
- 	 * In order to reduce the possibility of kernel panic when failed to
- 	 * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
-@@ -815,6 +813,7 @@ void __init setup_arch(char **cmdline_p)
- 
- 	cpu_cache_init();
- 	paging_init();
-+	device_tree_init();
- }
- 
- unsigned long kernelsp[NR_CPUS];
diff --git a/target/linux/ramips/patches-5.10/316-arch-mips-do-not-select-illegal-access-driver-by-def.patch b/target/linux/ramips/patches-5.10/316-arch-mips-do-not-select-illegal-access-driver-by-def.patch
deleted file mode 100644
index 1dc54ccf2326..000000000000
--- a/target/linux/ramips/patches-5.10/316-arch-mips-do-not-select-illegal-access-driver-by-def.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 9e6ce539092a1dd605a20bf73c655a9de58d8641 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:18:05 +0100
-Subject: [PATCH 15/53] arch: mips: do not select illegal access driver by
- default
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Kconfig |    4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -14,9 +14,9 @@ config CLKEVT_RT3352
- 	select CEVT_SYSTICK_QUIRK
- 
- config RALINK_ILL_ACC
--	bool
-+	bool "illegal access irq"
- 	depends on SOC_RT305X
--	default y
-+	default n
- 
- config IRQ_INTC
- 	bool
diff --git a/target/linux/ramips/patches-5.10/320-MIPS-add-support-for-buggy-MT7621S-core-detection.patch b/target/linux/ramips/patches-5.10/320-MIPS-add-support-for-buggy-MT7621S-core-detection.patch
deleted file mode 100644
index 0eb667641403..000000000000
--- a/target/linux/ramips/patches-5.10/320-MIPS-add-support-for-buggy-MT7621S-core-detection.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 6decd1aad15f56b169217789630a0098b496de0e Mon Sep 17 00:00:00 2001
-From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Date: Wed, 7 Apr 2021 13:07:38 -0700
-Subject: [PATCH] MIPS: add support for buggy MT7621S core detection
-
-Most MT7621 SoCs have 2 cores, which is detected and supported properly
-by CPS.
-
-Unfortunately, MT7621 SoC has a less common S variant with only one core.
-On MT7621S, GCR_CONFIG still reports 2 cores, which leads to hangs when
-starting SMP. CPULAUNCH registers can be used in that case to detect the
-absence of the second core and override the GCR_CONFIG PCORES field.
-
-Rework a long-standing OpenWrt patch to override the value of
-mips_cps_numcores on single-core MT7621 systems.
-
-Tested on a dual-core MT7621 device (Ubiquiti ER-X) and a single-core
-MT7621 device (Netgear R6220).
-
-Original 4.14 OpenWrt patch:
-Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=4cdbc90a376dd0555201c1434a2081e055e9ceb7
-Current 5.10 OpenWrt patch:
-Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/ramips/patches-5.10/320-mt7621-core-detect-hack.patch;h=c63f0f4c1ec742e24d8480e80553863744b58f6a;hb=10267e17299806f9885d086147878f6c492cb904
-
-Suggested-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/include/asm/mips-cps.h | 23 ++++++++++++++++++++++-
- 1 file changed, 22 insertions(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mips-cps.h
-+++ b/arch/mips/include/asm/mips-cps.h
-@@ -10,6 +10,8 @@
- #include <linux/io.h>
- #include <linux/types.h>
- 
-+#include <asm/mips-boards/launch.h>
-+
- extern unsigned long __cps_access_bad_size(void)
- 	__compiletime_error("Bad size for CPS accessor");
- 
-@@ -165,11 +167,30 @@ static inline uint64_t mips_cps_cluster_
-  */
- static inline unsigned int mips_cps_numcores(unsigned int cluster)
- {
-+	unsigned int ncores;
-+
- 	if (!mips_cm_present())
- 		return 0;
- 
- 	/* Add one before masking to handle 0xff indicating no cores */
--	return (mips_cps_cluster_config(cluster) + 1) & CM_GCR_CONFIG_PCORES;
-+	ncores = (mips_cps_cluster_config(cluster) + 1) & CM_GCR_CONFIG_PCORES;
-+
-+	if (IS_ENABLED(CONFIG_SOC_MT7621)) {
-+		struct cpulaunch *launch;
-+
-+		/*
-+		 * Ralink MT7621S SoC is single core, but the GCR_CONFIG method
-+		 * always reports 2 cores. Check the second core's LAUNCH_FREADY
-+		 * flag to detect if the second core is missing. This method
-+		 * only works before the core has been started.
-+		 */
-+		launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
-+		launch += 2; /* MT7621 has 2 VPEs per core */
-+		if (!(launch->flags & LAUNCH_FREADY))
-+			ncores = 1;
-+	}
-+
-+	return ncores;
- }
- 
- /**
diff --git a/target/linux/ramips/patches-5.10/322-mt7621-fix-cpu-clk-add-clkdev.patch b/target/linux/ramips/patches-5.10/322-mt7621-fix-cpu-clk-add-clkdev.patch
deleted file mode 100644
index 87f8081367f5..000000000000
--- a/target/linux/ramips/patches-5.10/322-mt7621-fix-cpu-clk-add-clkdev.patch
+++ /dev/null
@@ -1,186 +0,0 @@
---- a/arch/mips/include/asm/mach-ralink/mt7621.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
-@@ -17,6 +17,10 @@
- #define SYSC_REG_CHIP_REV		0x0c
- #define SYSC_REG_SYSTEM_CONFIG0		0x10
- #define SYSC_REG_SYSTEM_CONFIG1		0x14
-+#define SYSC_REG_CLKCFG0		0x2c
-+#define SYSC_REG_CUR_CLK_STS		0x44
-+
-+#define MEMC_REG_CPU_PLL		0x648
- 
- #define CHIP_REV_PKG_MASK		0x1
- #define CHIP_REV_PKG_SHIFT		16
-@@ -24,6 +28,22 @@
- #define CHIP_REV_VER_SHIFT		8
- #define CHIP_REV_ECO_MASK		0xf
- 
-+#define XTAL_MODE_SEL_MASK		0x7
-+#define XTAL_MODE_SEL_SHIFT		6
-+
-+#define CPU_CLK_SEL_MASK		0x3
-+#define CPU_CLK_SEL_SHIFT		30
-+
-+#define CUR_CPU_FDIV_MASK		0x1f
-+#define CUR_CPU_FDIV_SHIFT		8
-+#define CUR_CPU_FFRAC_MASK		0x1f
-+#define CUR_CPU_FFRAC_SHIFT		0
-+
-+#define CPU_PLL_PREDIV_MASK		0x3
-+#define CPU_PLL_PREDIV_SHIFT		12
-+#define CPU_PLL_FBDIV_MASK		0x7f
-+#define CPU_PLL_FBDIV_SHIFT		4
-+
- #define MT7621_DRAM_BASE                0x0
- #define MT7621_DDR2_SIZE_MIN		32
- #define MT7621_DDR2_SIZE_MAX		256
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -9,12 +9,17 @@
- #include <linux/init.h>
- #include <linux/slab.h>
- #include <linux/sys_soc.h>
-+#include <linux/clk.h>
-+#include <linux/clkdev.h>
-+#include <linux/clk-provider.h>
-+#include <dt-bindings/clock/mt7621-clk.h>
- 
- #include <asm/mipsregs.h>
- #include <asm/smp-ops.h>
- #include <asm/mips-cps.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/mt7621.h>
-+#include <asm/time.h>
- 
- #include <pinmux.h>
- 
-@@ -105,11 +110,89 @@ static struct rt2880_pmx_group mt7621_pi
- 	{ 0 }
- };
- 
-+static struct clk *clks[MT7621_CLK_MAX];
-+static struct clk_onecell_data clk_data = {
-+	.clks = clks,
-+	.clk_num = ARRAY_SIZE(clks),
-+};
-+
- phys_addr_t mips_cpc_default_phys_base(void)
- {
- 	panic("Cannot detect cpc address");
- }
- 
-+static struct clk *__init mt7621_add_sys_clkdev(
-+	const char *id, unsigned long rate)
-+{
-+	struct clk *clk;
-+	int err;
-+
-+	clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
-+	if (IS_ERR(clk))
-+		panic("failed to allocate %s clock structure", id);
-+
-+	err = clk_register_clkdev(clk, id, NULL);
-+	if (err)
-+		panic("unable to register %s clock device", id);
-+
-+	return clk;
-+}
-+
-+void __init ralink_clk_init(void)
-+{
-+	u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac;
-+	u32 pll, prediv, fbdiv;
-+	u32 xtal_clk, cpu_clk, bus_clk;
-+	const static u32 prediv_tbl[] = {0, 1, 2, 2};
-+
-+	syscfg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
-+	xtal_sel = (syscfg >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK;
-+
-+	clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0);
-+	clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK;
-+
-+	curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
-+	ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK;
-+	ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK;
-+
-+	if (xtal_sel <= 2)
-+		xtal_clk = 20 * 1000 * 1000;
-+	else if (xtal_sel <= 5)
-+		xtal_clk = 40 * 1000 * 1000;
-+	else
-+		xtal_clk = 25 * 1000 * 1000;
-+
-+	switch (clk_sel) {
-+	case 0:
-+		cpu_clk = 500 * 1000 * 1000;
-+		break;
-+	case 1:
-+		pll = rt_memc_r32(MEMC_REG_CPU_PLL);
-+		fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK;
-+		prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK;
-+		cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv];
-+		break;
-+	default:
-+		cpu_clk = xtal_clk;
-+	}
-+
-+	cpu_clk = cpu_clk / ffiv * ffrac;
-+	bus_clk = cpu_clk / 4;
-+
-+	clks[MT7621_CLK_CPU] = mt7621_add_sys_clkdev("cpu", cpu_clk);
-+	clks[MT7621_CLK_BUS] = mt7621_add_sys_clkdev("bus", bus_clk);
-+
-+	pr_info("CPU Clock: %dMHz\n", cpu_clk / 1000000);
-+	mips_hpt_frequency = cpu_clk / 2;
-+}
-+
-+static void __init mt7621_clocks_init_dt(struct device_node *np)
-+{
-+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-+}
-+
-+CLK_OF_DECLARE(mt7621, "mediatek,mt7621-pll", mt7621_clocks_init_dt);
-+
- void __init ralink_of_remap(void)
- {
- 	rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
---- a/arch/mips/ralink/timer-gic.c
-+++ b/arch/mips/ralink/timer-gic.c
-@@ -9,14 +9,14 @@
- 
- #include <linux/of.h>
- #include <linux/of_clk.h>
--#include <linux/clocksource.h>
-+#include <asm/time.h>
- 
- #include "common.h"
- 
- void __init plat_time_init(void)
- {
- 	ralink_of_remap();
--
-+	ralink_clk_init();
- 	of_clk_init(NULL);
- 	timer_probe();
- }
---- /dev/null
-+++ b/include/dt-bindings/clock/mt7621-clk.h
-@@ -0,0 +1,18 @@
-+/*
-+ * Copyright (C) 2018 Weijie Gao <hackpascal@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef __DT_BINDINGS_MT7621_CLK_H
-+#define __DT_BINDINGS_MT7621_CLK_H
-+
-+#define MT7621_CLK_CPU		0
-+#define MT7621_CLK_BUS		1
-+
-+#define MT7621_CLK_MAX		2
-+
-+#endif /* __DT_BINDINGS_MT7621_CLK_H */
diff --git a/target/linux/ramips/patches-5.10/323-mt7621-memory-detect.patch b/target/linux/ramips/patches-5.10/323-mt7621-memory-detect.patch
deleted file mode 100644
index 40fc5b71d905..000000000000
--- a/target/linux/ramips/patches-5.10/323-mt7621-memory-detect.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From b5a52351a66f3c2a7a207548aa87d78ff2d336c0 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Wed, 10 Jul 2019 00:24:48 +0800
-Subject: [PATCH] MIPS: ralink: mt7621: add memory detection support
-
-mt7621 has the following memory map:
-0x0-0x1c000000: lower 448m memory
-0x1c000000-0x2000000: peripheral registers
-0x20000000-0x2400000: higher 64m memory
-
-detect_memory_region in arch/mips/kernel/setup.c only add the first
-memory region and isn't suitable for 512m memory detection because
-it may accidentally read the memory area for peripheral registers.
-
-This commit adds memory detection capability for mt7621:
-1. add the highmem area when 512m is detected.
-2. guard memcmp from accessing peripheral registers:
-     This only happens when some weird user decided to change
-     kernel load address to 256m or higher address. Since this
-     is a quite unusual case, we just skip 512m testing and return
-     256m as memory size.
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
----
- arch/mips/include/asm/mach-ralink/mt7621.h |  7 ++---
- arch/mips/ralink/mt7621.c                  | 30 +++++++++++++++++++---
- 2 files changed, 30 insertions(+), 7 deletions(-)
-
---- a/arch/mips/include/asm/mach-ralink/mt7621.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
-@@ -44,9 +44,10 @@
- #define CPU_PLL_FBDIV_MASK		0x7f
- #define CPU_PLL_FBDIV_SHIFT		4
- 
--#define MT7621_DRAM_BASE                0x0
--#define MT7621_DDR2_SIZE_MIN		32
--#define MT7621_DDR2_SIZE_MAX		256
-+#define MT7621_LOWMEM_BASE		0x0
-+#define MT7621_LOWMEM_MAX_SIZE		0x1C000000
-+#define MT7621_HIGHMEM_BASE		0x20000000
-+#define MT7621_HIGHMEM_SIZE		0x4000000
- 
- #define MT7621_CHIP_NAME0		0x3637544D
- #define MT7621_CHIP_NAME1		0x20203132
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -9,11 +9,13 @@
- #include <linux/init.h>
- #include <linux/slab.h>
- #include <linux/sys_soc.h>
-+#include <linux/memblock.h>
- #include <linux/clk.h>
- #include <linux/clkdev.h>
- #include <linux/clk-provider.h>
- #include <dt-bindings/clock/mt7621-clk.h>
- 
-+#include <asm/bootinfo.h>
- #include <asm/mipsregs.h>
- #include <asm/smp-ops.h>
- #include <asm/mips-cps.h>
-@@ -54,6 +56,8 @@
- #define MT7621_GPIO_MODE_SDHCI_SHIFT	18
- #define MT7621_GPIO_MODE_SDHCI_GPIO	1
- 
-+static void *detect_magic __initdata = detect_memory_region;
-+
- static struct rt2880_pmx_func uart1_grp[] =  { FUNC("uart1", 0, 1, 2) };
- static struct rt2880_pmx_func i2c_grp[] =  { FUNC("i2c", 0, 3, 2) };
- static struct rt2880_pmx_func uart3_grp[] = {
-@@ -138,6 +142,26 @@ static struct clk *__init mt7621_add_sys
- 	return clk;
- }
- 
-+void __init mt7621_memory_detect(void)
-+{
-+	void *dm = &detect_magic;
-+	phys_addr_t size;
-+
-+	for (size = 32 * SZ_1M; size < 256 * SZ_1M; size <<= 1) {
-+		if (!__builtin_memcmp(dm, dm + size, sizeof(detect_magic)))
-+			break;
-+	}
-+
-+	if ((size == 256 * SZ_1M) &&
-+	    (CPHYSADDR(dm + size) < MT7621_LOWMEM_MAX_SIZE) &&
-+	    __builtin_memcmp(dm, dm + size, sizeof(detect_magic))) {
-+		memblock_add(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE);
-+		memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE);
-+	} else {
-+		memblock_add(MT7621_LOWMEM_BASE, size);
-+	}
-+}
-+
- void __init ralink_clk_init(void)
- {
- 	u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac;
-@@ -277,10 +301,7 @@ void prom_soc_init(struct ralink_soc_inf
- 		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
- 		(rev & CHIP_REV_ECO_MASK));
- 
--	soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
--	soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
--	soc_info->mem_base = MT7621_DRAM_BASE;
--
-+	soc_info->mem_detect = mt7621_memory_detect;
- 	rt2880_pinmux_data = mt7621_pinmux_data;
- 
- 	soc_dev_init(soc_info, rev);
---- a/arch/mips/ralink/common.h
-+++ b/arch/mips/ralink/common.h
-@@ -17,6 +17,7 @@ struct ralink_soc_info {
- 	unsigned long mem_size;
- 	unsigned long mem_size_min;
- 	unsigned long mem_size_max;
-+	void (*mem_detect)(void);
- };
- extern struct ralink_soc_info soc_info;
- 
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -85,6 +85,8 @@ void __init plat_mem_setup(void)
- 	of_scan_flat_dt(early_init_dt_find_memory, NULL);
- 	if (memory_dtb)
- 		of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-+	else if (soc_info.mem_detect)
-+		soc_info.mem_detect();
- 	else if (soc_info.mem_size)
- 		memblock_add(soc_info.mem_base, soc_info.mem_size * SZ_1M);
- 	else
diff --git a/target/linux/ramips/patches-5.10/324-mt7621-perfctr-fix.patch b/target/linux/ramips/patches-5.10/324-mt7621-perfctr-fix.patch
deleted file mode 100644
index dfeac7eb993d..000000000000
--- a/target/linux/ramips/patches-5.10/324-mt7621-perfctr-fix.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/arch/mips/ralink/irq-gic.c
-+++ b/arch/mips/ralink/irq-gic.c
-@@ -13,6 +13,12 @@
- 
- int get_c0_perfcount_int(void)
- {
-+	/*
-+	 * Performance counter events are routed through GIC.
-+	 * Prevent them from firing on CPU IRQ7 as well
-+	 */
-+	clear_c0_status(IE_SW0 << 7);
-+
- 	return gic_get_c0_perfcount_int();
- }
- EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
diff --git a/target/linux/ramips/patches-5.10/325-mt7621-fix-memory-detect.patch b/target/linux/ramips/patches-5.10/325-mt7621-fix-memory-detect.patch
deleted file mode 100644
index ad072ec54e46..000000000000
--- a/target/linux/ramips/patches-5.10/325-mt7621-fix-memory-detect.patch
+++ /dev/null
@@ -1,58 +0,0 @@
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -56,7 +56,9 @@
- #define MT7621_GPIO_MODE_SDHCI_SHIFT	18
- #define MT7621_GPIO_MODE_SDHCI_GPIO	1
- 
--static void *detect_magic __initdata = detect_memory_region;
-+#define MT7621_MEM_TEST_PATTERN         0xaa5555aa
-+
-+static u32 detect_magic __initdata;
- 
- static struct rt2880_pmx_func uart1_grp[] =  { FUNC("uart1", 0, 1, 2) };
- static struct rt2880_pmx_func i2c_grp[] =  { FUNC("i2c", 0, 3, 2) };
-@@ -142,24 +144,32 @@ static struct clk *__init mt7621_add_sys
- 	return clk;
- }
- 
-+static bool __init mt7621_addr_wraparound_test(phys_addr_t size)
-+{
-+	void *dm = (void *)KSEG1ADDR(&detect_magic);
-+	if (CPHYSADDR(dm + size) >= MT7621_LOWMEM_MAX_SIZE)
-+		return true;
-+	__raw_writel(MT7621_MEM_TEST_PATTERN, dm);
-+	if (__raw_readl(dm) != __raw_readl(dm + size))
-+		return false;
-+	__raw_writel(!MT7621_MEM_TEST_PATTERN, dm);
-+	return __raw_readl(dm) == __raw_readl(dm + size);
-+}
-+
- void __init mt7621_memory_detect(void)
- {
--	void *dm = &detect_magic;
- 	phys_addr_t size;
- 
--	for (size = 32 * SZ_1M; size < 256 * SZ_1M; size <<= 1) {
--		if (!__builtin_memcmp(dm, dm + size, sizeof(detect_magic)))
--			break;
-+	for (size = 32 * SZ_1M; size <= 256 * SZ_1M; size <<= 1) {
-+		if (mt7621_addr_wraparound_test(size)) {
-+			memblock_add(MT7621_LOWMEM_BASE, size);
-+			return;
-+		}
- 	}
- 
--	if ((size == 256 * SZ_1M) &&
--	    (CPHYSADDR(dm + size) < MT7621_LOWMEM_MAX_SIZE) &&
--	    __builtin_memcmp(dm, dm + size, sizeof(detect_magic))) {
--		memblock_add(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE);
--		memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE);
--	} else {
--		memblock_add(MT7621_LOWMEM_BASE, size);
--	}
-+	/* addr doesn't wrap around at dm + 256M, assume 512M memory. */
-+	memblock_add(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE);
-+	memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE);
- }
- 
- void __init ralink_clk_init(void)
diff --git a/target/linux/ramips/patches-5.10/400-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-5.10/400-mtd-cfi-cmdset-0002-force-word-write.patch
deleted file mode 100644
index 7011bbe50b2d..000000000000
--- a/target/linux/ramips/patches-5.10/400-mtd-cfi-cmdset-0002-force-word-write.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From ee9081b2726a5ca8cde5497afdc5425e21ff8f8b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 15 Jul 2013 00:39:21 +0200
-Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write
-
----
- drivers/mtd/chips/cfi_cmdset_0002.c |    9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -40,7 +40,7 @@
- #include <linux/mtd/xip.h>
- 
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
- 
- #define MAX_RETRIES 3
- 
diff --git a/target/linux/ramips/patches-5.10/405-mtd-spi-nor-Add-support-for-BoHong-bh25q128as.patch b/target/linux/ramips/patches-5.10/405-mtd-spi-nor-Add-support-for-BoHong-bh25q128as.patch
deleted file mode 100644
index dead8e7595be..000000000000
--- a/target/linux/ramips/patches-5.10/405-mtd-spi-nor-Add-support-for-BoHong-bh25q128as.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 52d14545d2fc276b1bf9ccf48d4612fab6edfb6a Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Thu, 6 May 2021 17:49:55 +0200
-Subject: [PATCH] mtd: spi-nor: Add support for BoHong bh25q128as
-
-Add MTD support for the BoHong bh25q128as SPI NOR chip.
-The chip has 16MB of total capacity, divided into a total of 256
-sectors, each 64KB sized. The chip also supports 4KB sectors.
-Additionally, it supports dual and quad read modes.
-
-Functionality was verified on an Tenbay WR1800K / MTK MT7621 board.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- drivers/mtd/spi-nor/Makefile |  1 +
- drivers/mtd/spi-nor/bohong.c | 21 +++++++++++++++++++++
- drivers/mtd/spi-nor/core.c   |  1 +
- drivers/mtd/spi-nor/core.h   |  1 +
- 4 files changed, 24 insertions(+)
- create mode 100644 drivers/mtd/spi-nor/bohong.c
-
---- a/drivers/mtd/spi-nor/Makefile
-+++ b/drivers/mtd/spi-nor/Makefile
-@@ -2,6 +2,7 @@
- 
- spi-nor-objs			:= core.o sfdp.o
- spi-nor-objs			+= atmel.o
-+spi-nor-objs			+= bohong.o
- spi-nor-objs			+= catalyst.o
- spi-nor-objs			+= eon.o
- spi-nor-objs			+= esmt.o
---- /dev/null
-+++ b/drivers/mtd/spi-nor/bohong.c
-@@ -0,0 +1,21 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2005, Intec Automation Inc.
-+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
-+ */
-+
-+#include <linux/mtd/spi-nor.h>
-+
-+#include "core.h"
-+
-+static const struct flash_info bohong_parts[] = {
-+	/* BoHong Microelectronics */
-+	{ "bh25q128as", INFO(0x684018, 0, 64 * 1024, 256,
-+			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+};
-+
-+const struct spi_nor_manufacturer spi_nor_bohong = {
-+	.name = "bohong",
-+	.parts = bohong_parts,
-+	.nparts = ARRAY_SIZE(bohong_parts),
-+};
---- a/drivers/mtd/spi-nor/core.c
-+++ b/drivers/mtd/spi-nor/core.c
-@@ -2023,6 +2023,7 @@ int spi_nor_sr2_bit7_quad_enable(struct
- 
- static const struct spi_nor_manufacturer *manufacturers[] = {
- 	&spi_nor_atmel,
-+	&spi_nor_bohong,
- 	&spi_nor_catalyst,
- 	&spi_nor_eon,
- 	&spi_nor_esmt,
---- a/drivers/mtd/spi-nor/core.h
-+++ b/drivers/mtd/spi-nor/core.h
-@@ -382,6 +382,7 @@ struct spi_nor_manufacturer {
- 
- /* Manufacturer drivers. */
- extern const struct spi_nor_manufacturer spi_nor_atmel;
-+extern const struct spi_nor_manufacturer spi_nor_bohong;
- extern const struct spi_nor_manufacturer spi_nor_catalyst;
- extern const struct spi_nor_manufacturer spi_nor_eon;
- extern const struct spi_nor_manufacturer spi_nor_esmt;
diff --git a/target/linux/ramips/patches-5.10/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch b/target/linux/ramips/patches-5.10/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch
deleted file mode 100644
index d0686a7051ec..000000000000
--- a/target/linux/ramips/patches-5.10/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From e84e2430ee0e483842b4ff013ae8a6e7e2fa2734 Mon Sep 17 00:00:00 2001
-From: Weijie Gao <weijie.gao@mediatek.com>
-Date: Wed, 1 Apr 2020 02:07:58 +0800
-Subject: [PATCH 1/2] mtd: rawnand: add driver support for MT7621 nand
- flash controller
-
-This patch adds NAND flash controller driver for MediaTek MT7621 SoC.
-
-The NAND flash controller is similar with controllers described in
-mtk_nand.c, except that the controller from MT7621 doesn't support DMA
-transmission, and some registers' offset and fields are different.
-
-Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
----
- drivers/mtd/nand/raw/Kconfig       |    8 +
- drivers/mtd/nand/raw/Makefile      |    1 +
- drivers/mtd/nand/raw/mt7621_nand.c | 1348 ++++++++++++++++++++++++++++++++++++
- 3 files changed, 1357 insertions(+)
- create mode 100644 drivers/mtd/nand/raw/mt7621_nand.c
-
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -387,6 +387,14 @@ config MTD_NAND_QCOM
- 	  Enables support for NAND flash chips on SoCs containing the EBI2 NAND
- 	  controller. This controller is found on IPQ806x SoC.
- 
-+config MTD_NAND_MT7621
-+	tristate "MT7621 NAND controller"
-+	depends on SOC_MT7621 || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	help
-+	  Enables support for NAND controller on MT7621 SoC.
-+	  This driver uses PIO mode for data transmission instead of DMA mode.
-+
- config MTD_NAND_MTK
- 	tristate "MTK NAND controller"
- 	depends on ARCH_MEDIATEK || COMPILE_TEST
---- a/drivers/mtd/nand/raw/Makefile
-+++ b/drivers/mtd/nand/raw/Makefile
-@@ -51,6 +51,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI)		+= sunxi_n
- obj-$(CONFIG_MTD_NAND_HISI504)	        += hisi504_nand.o
- obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand/
- obj-$(CONFIG_MTD_NAND_QCOM)		+= qcom_nandc.o
-+obj-$(CONFIG_MTD_NAND_MT7621)		+= mt7621_nand.o
- obj-$(CONFIG_MTD_NAND_MTK)		+= mtk_ecc.o mtk_nand.o
- obj-$(CONFIG_MTD_NAND_MXIC)		+= mxic_nand.o
- obj-$(CONFIG_MTD_NAND_TEGRA)		+= tegra_nand.o
diff --git a/target/linux/ramips/patches-5.10/411-dt-bindings-add-documentation-for-mt7621-nand-driver.patch b/target/linux/ramips/patches-5.10/411-dt-bindings-add-documentation-for-mt7621-nand-driver.patch
deleted file mode 100644
index 3d122c10c043..000000000000
--- a/target/linux/ramips/patches-5.10/411-dt-bindings-add-documentation-for-mt7621-nand-driver.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 3d5f4da8296b23eb3abf8b13122b0d06a215e79c Mon Sep 17 00:00:00 2001
-From: Weijie Gao <weijie.gao@mediatek.com>
-Date: Wed, 1 Apr 2020 02:07:59 +0800
-Subject: [PATCH 2/2] dt-bindings: add documentation for mt7621-nand driver
-
-This patch adds documentation for MediaTek MT7621 NAND flash controller
-driver.
-
-Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
----
- .../bindings/mtd/mediatek,mt7621-nfc.yaml          | 68 ++++++++++++++++++++++
- 1 file changed, 68 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml
-@@ -0,0 +1,68 @@
-+# SPDX-License-Identifier: GPL-2.0
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/mediatek,mt7621-nfc.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MediaTek MT7621 SoC NAND Flash Controller (NFC) DT binding
-+
-+maintainers:
-+  - Weijie Gao <weijie.gao@mediatek.com>
-+
-+description: |
-+  This driver uses a single node to describe both NAND Flash controller
-+  interface (NFI) and ECC engine for MT7621 SoC.
-+  MT7621 supports only one chip select.
-+
-+properties:
-+  "#address-cells": false
-+  "#size-cells": false
-+
-+  compatible:
-+    enum:
-+      - mediatek,mt7621-nfc
-+
-+  reg:
-+    items:
-+      - description: Register base of NFI core
-+      - description: Register base of ECC engine
-+
-+  reg-names:
-+    items:
-+      - const: nfi
-+      - const: ecc
-+
-+  clocks:
-+    items:
-+      - description: Source clock for NFI core, fixed 125MHz
-+
-+  clock-names:
-+    items:
-+      - const: nfi_clk
-+
-+required:
-+  - compatible
-+  - reg
-+  - reg-names
-+  - clocks
-+  - clock-names
-+
-+examples:
-+  - |
-+    nficlock: nficlock {
-+    	#clock-cells = <0>;
-+    	compatible = "fixed-clock";
-+
-+    	clock-frequency = <125000000>;
-+    };
-+
-+    nand@1e003000 {
-+    	compatible = "mediatek,mt7621-nfc";
-+
-+    	reg = <0x1e003000 0x800
-+    	       0x1e003800 0x800>;
-+    	reg-names = "nfi", "ecc";
-+
-+    	clocks = <&nficlock>;
-+    	clock-names = "nfi_clk";
-+    };
diff --git a/target/linux/ramips/patches-5.10/700-net-ethernet-mediatek-support-net-labels.patch b/target/linux/ramips/patches-5.10/700-net-ethernet-mediatek-support-net-labels.patch
deleted file mode 100644
index 0b3dc00e54c8..000000000000
--- a/target/linux/ramips/patches-5.10/700-net-ethernet-mediatek-support-net-labels.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From bd0f89de5476ca25e73fae829ba3e1dafae1d90d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
-Date: Fri, 21 Jun 2019 10:04:05 +0200
-Subject: [PATCH] net: ethernet: mediatek: support net-labels
-
-With this patch, device name can be set within dts file in the same way as dsa
-port can.
-Add: label = "wan"; to GMAC node.
-
-Signed-off-by: René van Dorst <opensource@vdorst.com>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2980,6 +2980,7 @@ static const struct net_device_ops mtk_n
- 
- static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
- {
-+	const char *name = of_get_property(np, "label", NULL);
- 	const __be32 *_id = of_get_property(np, "reg", NULL);
- 	phy_interface_t phy_mode;
- 	struct phylink *phylink;
-@@ -3075,6 +3076,9 @@ static int mtk_add_mac(struct mtk_eth *e
- 	else
- 		eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH_2K - MTK_RX_ETH_HLEN;
- 
-+	if (name)
-+		strlcpy(eth->netdev[id]->name, name, IFNAMSIZ);
-+
- 	return 0;
- 
- free_netdev:
diff --git a/target/linux/ramips/patches-5.10/720-Revert-net-phy-simplify-phy_link_change-arguments.patch b/target/linux/ramips/patches-5.10/720-Revert-net-phy-simplify-phy_link_change-arguments.patch
deleted file mode 100644
index f3df206f3e18..000000000000
--- a/target/linux/ramips/patches-5.10/720-Revert-net-phy-simplify-phy_link_change-arguments.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From ffbb1b37a3e1ce1a5c574a6bd4f5aede8bc468ac Mon Sep 17 00:00:00 2001
-From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
-Date: Sat, 27 Feb 2021 20:20:07 -0800
-Subject: [PATCH] Revert "net: phy: simplify phy_link_change arguments"
-
-This reverts commit a307593a644443db12888f45eed0dafb5869e2cc.
-
-This brings back the do_carrier flags used by the (hacky) next patch,
-still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c
----
- drivers/net/phy/phy.c        | 12 ++++++------
- drivers/net/phy/phy_device.c | 12 +++++++-----
- drivers/net/phy/phylink.c    |  3 ++-
- include/linux/phy.h          |  2 +-
- 4 files changed, 16 insertions(+), 13 deletions(-)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -70,13 +70,13 @@ static void phy_process_state_change(str
- 
- static void phy_link_up(struct phy_device *phydev)
- {
--	phydev->phy_link_change(phydev, true);
-+	phydev->phy_link_change(phydev, true, true);
- 	phy_led_trigger_change_speed(phydev);
- }
- 
--static void phy_link_down(struct phy_device *phydev)
-+static void phy_link_down(struct phy_device *phydev, bool do_carrier)
- {
--	phydev->phy_link_change(phydev, false);
-+	phydev->phy_link_change(phydev, false, do_carrier);
- 	phy_led_trigger_change_speed(phydev);
- }
- 
-@@ -584,7 +584,7 @@ int phy_start_cable_test(struct phy_devi
- 		goto out;
- 
- 	/* Mark the carrier down until the test is complete */
--	phy_link_down(phydev);
-+	phy_link_down(phydev, true);
- 
- 	netif_testing_on(dev);
- 	err = phydev->drv->cable_test_start(phydev);
-@@ -655,7 +655,7 @@ int phy_start_cable_test_tdr(struct phy_
- 		goto out;
- 
- 	/* Mark the carrier down until the test is complete */
--	phy_link_down(phydev);
-+	phy_link_down(phydev, true);
- 
- 	netif_testing_on(dev);
- 	err = phydev->drv->cable_test_tdr_start(phydev, config);
-@@ -726,7 +726,7 @@ static int phy_check_link_status(struct
- 		phy_link_up(phydev);
- 	} else if (!phydev->link && phydev->state != PHY_NOLINK) {
- 		phydev->state = PHY_NOLINK;
--		phy_link_down(phydev);
-+		phy_link_down(phydev, true);
- 	}
- 
- 	return 0;
-@@ -1241,7 +1241,7 @@ void phy_state_machine(struct work_struc
- 	case PHY_HALTED:
- 		if (phydev->link) {
- 			phydev->link = 0;
--			phy_link_down(phydev);
-+			phy_link_down(phydev, true);
- 		}
- 		do_suspend = true;
- 		break;
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -936,14 +936,16 @@ struct phy_device *phy_find_first(struct
- }
- EXPORT_SYMBOL(phy_find_first);
- 
--static void phy_link_change(struct phy_device *phydev, bool up)
-+static void phy_link_change(struct phy_device *phydev, bool up, bool do_carrier)
- {
- 	struct net_device *netdev = phydev->attached_dev;
- 
--	if (up)
--		netif_carrier_on(netdev);
--	else
--		netif_carrier_off(netdev);
-+	if (do_carrier) {
-+		if (up)
-+			netif_carrier_on(netdev);
-+		else
-+			netif_carrier_off(netdev);
-+	}
- 	phydev->adjust_link(netdev);
- 	if (phydev->mii_ts && phydev->mii_ts->link_state)
- 		phydev->mii_ts->link_state(phydev->mii_ts, phydev);
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -931,7 +931,8 @@ void phylink_destroy(struct phylink *pl)
- }
- EXPORT_SYMBOL_GPL(phylink_destroy);
- 
--static void phylink_phy_change(struct phy_device *phydev, bool up)
-+static void phylink_phy_change(struct phy_device *phydev, bool up,
-+			       bool do_carrier)
- {
- 	struct phylink *pl = phydev->phylink;
- 	bool tx_pause, rx_pause;
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -642,7 +642,7 @@ struct phy_device {
- 	u8 mdix;
- 	u8 mdix_ctrl;
- 
--	void (*phy_link_change)(struct phy_device *phydev, bool up);
-+	void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier);
- 	void (*adjust_link)(struct net_device *dev);
- 
- #if IS_ENABLED(CONFIG_MACSEC)
diff --git a/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch b/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch
deleted file mode 100644
index 00a419284023..000000000000
--- a/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 0b6eb1e68290243d439ee330ea8d0b239a5aec69 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:38:50 +0100
-Subject: [PATCH 34/53] NET: multi phy support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/phy.c |    9 ++++++---
- include/linux/phy.h   |    1 +
- 2 files changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -726,7 +726,10 @@ static int phy_check_link_status(struct
- 		phy_link_up(phydev);
- 	} else if (!phydev->link && phydev->state != PHY_NOLINK) {
- 		phydev->state = PHY_NOLINK;
--		phy_link_down(phydev, true);
-+		if (!phydev->no_auto_carrier_off)
-+			phy_link_down(phydev, true);
-+		else
-+			phy_link_down(phydev, false);
- 	}
- 
- 	return 0;
-@@ -1241,7 +1244,10 @@ void phy_state_machine(struct work_struc
- 	case PHY_HALTED:
- 		if (phydev->link) {
- 			phydev->link = 0;
--			phy_link_down(phydev, true);
-+			if (!phydev->no_auto_carrier_off)
-+				phy_link_down(phydev, true);
-+			else
-+				phy_link_down(phydev, false);
- 		}
- 		do_suspend = true;
- 		break;
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -561,6 +561,7 @@ struct phy_device {
- 	unsigned sysfs_links:1;
- 	unsigned loopback_enabled:1;
- 	unsigned downshifted_rate:1;
-+	unsigned no_auto_carrier_off:1;
- 
- 	unsigned autoneg:1;
- 	/* The most recently read link state */
diff --git a/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch
deleted file mode 100644
index 93dabf877626..000000000000
--- a/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 19:45:30 +0200
-Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink
-
-Describe gpio-ralink binding.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: devicetree@vger.kernel.org
-Cc: linux-gpio@vger.kernel.org
----
- .../devicetree/bindings/gpio/gpio-ralink.txt       |   40 ++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-@@ -0,0 +1,40 @@
-+Ralink SoC GPIO controller bindings
-+
-+Required properties:
-+- compatible:
-+  - "ralink,rt2880-gpio" for Ralink controllers
-+- #gpio-cells : Should be two.
-+  - first cell is the pin number
-+  - second cell is used to specify optional parameters (unused)
-+- gpio-controller : Marks the device node as a GPIO controller
-+- reg : Physical base address and length of the controller's registers
-+- interrupt-parent: phandle to the INTC device node
-+- interrupts : Specify the INTC interrupt number
-+- ngpios : Specify the number of GPIOs
-+- ralink,register-map : The register layout depends on the GPIO bank and actual
-+		SoC type. Register offsets need to be in this order.
-+		[ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
-+
-+Optional properties:
-+- ralink,gpio-base : Specify the GPIO chips base number
-+
-+Example:
-+
-+	gpio0: gpio@600 {
-+		compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
-+
-+		#gpio-cells = <2>;
-+		gpio-controller;
-+
-+		reg = <0x600 0x34>;
-+
-+		interrupt-parent = <&intc>;
-+		interrupts = <6>;
-+
-+		ngpios = <24>;
-+		ralink,gpio-base = <0>;
-+		ralink,register-map = [ 00 04 08 0c
-+				20 24 28 2c
-+				30 34 ];
-+
-+	};
diff --git a/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
deleted file mode 100644
index 52d40215f20d..000000000000
--- a/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
+++ /dev/null
@@ -1,416 +0,0 @@
-From 69fdd2c4f937796b934e89c33acde9d082e27bfd Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 4 Aug 2014 20:36:29 +0200
-Subject: [PATCH 27/53] GPIO: MIPS: ralink: add gpio driver for ralink SoC
-
-Add gpio driver for Ralink SoC. This driver makes the gpio core on
-RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: linux-gpio@vger.kernel.org
----
- arch/mips/include/asm/mach-ralink/gpio.h |   24 ++
- drivers/gpio/Kconfig                     |    6 +
- drivers/gpio/Makefile                    |    1 +
- drivers/gpio/gpio-ralink.c               |  355 ++++++++++++++++++++++++++++++
- 4 files changed, 386 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
- create mode 100644 drivers/gpio/gpio-ralink.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/gpio.h
-@@ -0,0 +1,24 @@
-+/*
-+ *  Ralink SoC GPIO API support
-+ *
-+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
-+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef __ASM_MACH_RALINK_GPIO_H
-+#define __ASM_MACH_RALINK_GPIO_H
-+
-+#define ARCH_NR_GPIOS	128
-+#include <asm-generic/gpio.h>
-+
-+#define gpio_get_value	__gpio_get_value
-+#define gpio_set_value	__gpio_set_value
-+#define gpio_cansleep	__gpio_cansleep
-+#define gpio_to_irq	__gpio_to_irq
-+
-+#endif /* __ASM_MACH_RALINK_GPIO_H */
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -535,6 +535,12 @@ config GPIO_SNPS_CREG
- 	  where only several fields in register belong to GPIO lines and
- 	  each GPIO line owns a field with different length and on/off value.
- 
-+config GPIO_RALINK
-+	bool "Ralink GPIO Support"
-+	depends on RALINK
-+	help
-+	  Say yes here to support the Ralink SoC GPIO device
-+
- config GPIO_SPEAR_SPICS
- 	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
- 	depends on PLAT_SPEAR
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -120,6 +120,7 @@ obj-$(CONFIG_GPIO_PISOSR)		+= gpio-pisos
- obj-$(CONFIG_GPIO_PL061)		+= gpio-pl061.o
- obj-$(CONFIG_GPIO_PMIC_EIC_SPRD)	+= gpio-pmic-eic-sprd.o
- obj-$(CONFIG_GPIO_PXA)			+= gpio-pxa.o
-+obj-$(CONFIG_GPIO_RALINK)		+= gpio-ralink.o
- obj-$(CONFIG_GPIO_RASPBERRYPI_EXP)	+= gpio-raspberrypi-exp.o
- obj-$(CONFIG_GPIO_RC5T583)		+= gpio-rc5t583.o
- obj-$(CONFIG_GPIO_RCAR)			+= gpio-rcar.o
---- /dev/null
-+++ b/drivers/gpio/gpio-ralink.c
-@@ -0,0 +1,341 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <linux/spinlock.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/irqdomain.h>
-+#include <linux/interrupt.h>
-+
-+enum ralink_gpio_reg {
-+	GPIO_REG_INT = 0,
-+	GPIO_REG_EDGE,
-+	GPIO_REG_RENA,
-+	GPIO_REG_FENA,
-+	GPIO_REG_DATA,
-+	GPIO_REG_DIR,
-+	GPIO_REG_POL,
-+	GPIO_REG_SET,
-+	GPIO_REG_RESET,
-+	GPIO_REG_TOGGLE,
-+	GPIO_REG_MAX
-+};
-+
-+struct ralink_gpio_chip {
-+	struct gpio_chip chip;
-+	u8 regs[GPIO_REG_MAX];
-+
-+	spinlock_t lock;
-+	void __iomem *membase;
-+	struct irq_domain *domain;
-+	int irq;
-+
-+	u32 rising;
-+	u32 falling;
-+};
-+
-+#define MAP_MAX	4
-+static struct irq_domain *irq_map[MAP_MAX];
-+static int irq_map_count;
-+static atomic_t irq_refcount = ATOMIC_INIT(0);
-+
-+static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
-+{
-+	struct ralink_gpio_chip *rg;
-+
-+	rg = container_of(chip, struct ralink_gpio_chip, chip);
-+
-+	return rg;
-+}
-+
-+static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val)
-+{
-+	iowrite32(val, rg->membase + rg->regs[reg]);
-+}
-+
-+static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg)
-+{
-+	return ioread32(rg->membase + rg->regs[reg]);
-+}
-+
-+static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+	struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+	rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset));
-+}
-+
-+static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset)
-+{
-+	struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+	return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
-+}
-+
-+static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-+{
-+	struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+	unsigned long flags;
-+	u32 t;
-+
-+	spin_lock_irqsave(&rg->lock, flags);
-+	t = rt_gpio_r32(rg, GPIO_REG_DIR);
-+	t &= ~BIT(offset);
-+	rt_gpio_w32(rg, GPIO_REG_DIR, t);
-+	spin_unlock_irqrestore(&rg->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int ralink_gpio_direction_output(struct gpio_chip *chip,
-+					unsigned offset, int value)
-+{
-+	struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+	unsigned long flags;
-+	u32 t;
-+
-+	spin_lock_irqsave(&rg->lock, flags);
-+	ralink_gpio_set(chip, offset, value);
-+	t = rt_gpio_r32(rg, GPIO_REG_DIR);
-+	t |= BIT(offset);
-+	rt_gpio_w32(rg, GPIO_REG_DIR, t);
-+	spin_unlock_irqrestore(&rg->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
-+{
-+	struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+	if (rg->irq < 1)
-+		return -1;
-+
-+	return irq_create_mapping(rg->domain, pin);
-+}
-+
-+static void ralink_gpio_irq_handler(struct irq_desc *desc)
-+{
-+	int i;
-+
-+	for (i = 0; i < irq_map_count; i++) {
-+		struct irq_domain *domain = irq_map[i];
-+		struct ralink_gpio_chip *rg;
-+		unsigned long pending;
-+		int bit;
-+
-+		rg = (struct ralink_gpio_chip *) domain->host_data;
-+		pending = rt_gpio_r32(rg, GPIO_REG_INT);
-+
-+		for_each_set_bit(bit, &pending, rg->chip.ngpio) {
-+			u32 map = irq_find_mapping(domain, bit);
-+			generic_handle_irq(map);
-+			rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit));
-+		}
-+	}
-+}
-+
-+static void ralink_gpio_irq_unmask(struct irq_data *d)
-+{
-+	struct ralink_gpio_chip *rg;
-+	unsigned long flags;
-+	u32 rise, fall;
-+
-+	rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+	rise = rt_gpio_r32(rg, GPIO_REG_RENA);
-+	fall = rt_gpio_r32(rg, GPIO_REG_FENA);
-+
-+	spin_lock_irqsave(&rg->lock, flags);
-+	rt_gpio_w32(rg, GPIO_REG_RENA, rise | (BIT(d->hwirq) & rg->rising));
-+	rt_gpio_w32(rg, GPIO_REG_FENA, fall | (BIT(d->hwirq) & rg->falling));
-+	spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static void ralink_gpio_irq_mask(struct irq_data *d)
-+{
-+	struct ralink_gpio_chip *rg;
-+	unsigned long flags;
-+	u32 rise, fall;
-+
-+	rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+	rise = rt_gpio_r32(rg, GPIO_REG_RENA);
-+	fall = rt_gpio_r32(rg, GPIO_REG_FENA);
-+
-+	spin_lock_irqsave(&rg->lock, flags);
-+	rt_gpio_w32(rg, GPIO_REG_FENA, fall & ~BIT(d->hwirq));
-+	rt_gpio_w32(rg, GPIO_REG_RENA, rise & ~BIT(d->hwirq));
-+	spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type)
-+{
-+	struct ralink_gpio_chip *rg;
-+	u32 mask = BIT(d->hwirq);
-+
-+	rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+
-+	if (type == IRQ_TYPE_PROBE) {
-+		if ((rg->rising | rg->falling) & mask)
-+			return 0;
-+
-+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-+	}
-+
-+	if (type & IRQ_TYPE_EDGE_RISING)
-+		rg->rising |= mask;
-+	else
-+		rg->rising &= ~mask;
-+
-+	if (type & IRQ_TYPE_EDGE_FALLING)
-+		rg->falling |= mask;
-+	else
-+		rg->falling &= ~mask;
-+
-+	return 0;
-+}
-+
-+static struct irq_chip ralink_gpio_irq_chip = {
-+	.name		= "GPIO",
-+	.irq_unmask	= ralink_gpio_irq_unmask,
-+	.irq_mask	= ralink_gpio_irq_mask,
-+	.irq_mask_ack	= ralink_gpio_irq_mask,
-+	.irq_set_type	= ralink_gpio_irq_type,
-+};
-+
-+static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+	irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq);
-+	irq_set_handler_data(irq, d);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops irq_domain_ops = {
-+	.xlate = irq_domain_xlate_onecell,
-+	.map = gpio_map,
-+};
-+
-+static void ralink_gpio_irq_init(struct device_node *np,
-+				 struct ralink_gpio_chip *rg)
-+{
-+	if (irq_map_count >= MAP_MAX)
-+		return;
-+
-+	rg->irq = irq_of_parse_and_map(np, 0);
-+	if (!rg->irq)
-+		return;
-+
-+	rg->domain = irq_domain_add_linear(np, rg->chip.ngpio,
-+					   &irq_domain_ops, rg);
-+	if (!rg->domain) {
-+		dev_err(rg->chip.parent, "irq_domain_add_linear failed\n");
-+		return;
-+	}
-+
-+	irq_map[irq_map_count++] = rg->domain;
-+
-+	rt_gpio_w32(rg, GPIO_REG_RENA, 0x0);
-+	rt_gpio_w32(rg, GPIO_REG_FENA, 0x0);
-+
-+	if (!atomic_read(&irq_refcount))
-+		irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler);
-+	atomic_inc(&irq_refcount);
-+
-+	dev_info(rg->chip.parent, "registering %d irq handlers\n", rg->chip.ngpio);
-+}
-+
-+static int ralink_gpio_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	struct ralink_gpio_chip *rg;
-+	const __be32 *ngpio, *gpiobase;
-+
-+	if (!res) {
-+		dev_err(&pdev->dev, "failed to find resource\n");
-+		return -ENOMEM;
-+	}
-+
-+	rg = devm_kzalloc(&pdev->dev,
-+			sizeof(struct ralink_gpio_chip), GFP_KERNEL);
-+	if (!rg)
-+		return -ENOMEM;
-+
-+	rg->membase = devm_ioremap_resource(&pdev->dev, res);
-+	if (!rg->membase) {
-+		dev_err(&pdev->dev, "cannot remap I/O memory region\n");
-+		return -ENOMEM;
-+	}
-+
-+	if (of_property_read_u8_array(np, "ralink,register-map",
-+			rg->regs, GPIO_REG_MAX)) {
-+		dev_err(&pdev->dev, "failed to read register definition\n");
-+		return -EINVAL;
-+	}
-+
-+	ngpio = of_get_property(np, "ngpios", NULL);
-+	if (!ngpio) {
-+		dev_err(&pdev->dev, "failed to read number of pins\n");
-+		return -EINVAL;
-+	}
-+
-+	gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
-+	if (gpiobase)
-+		rg->chip.base = be32_to_cpu(*gpiobase);
-+	else
-+		rg->chip.base = -1;
-+
-+	spin_lock_init(&rg->lock);
-+
-+	rg->chip.parent = &pdev->dev;
-+	rg->chip.label = dev_name(&pdev->dev);
-+	rg->chip.of_node = np;
-+	rg->chip.ngpio = be32_to_cpu(*ngpio);
-+	rg->chip.direction_input = ralink_gpio_direction_input;
-+	rg->chip.direction_output = ralink_gpio_direction_output;
-+	rg->chip.get = ralink_gpio_get;
-+	rg->chip.set = ralink_gpio_set;
-+	rg->chip.request = gpiochip_generic_request;
-+	rg->chip.to_irq = ralink_gpio_to_irq;
-+	rg->chip.free = gpiochip_generic_free;
-+
-+	/* set polarity to low for all lines */
-+	rt_gpio_w32(rg, GPIO_REG_POL, 0);
-+
-+	dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
-+
-+	ralink_gpio_irq_init(np, rg);
-+
-+	return gpiochip_add(&rg->chip);
-+}
-+
-+static const struct of_device_id ralink_gpio_match[] = {
-+	{ .compatible = "ralink,rt2880-gpio" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_gpio_match);
-+
-+static struct platform_driver ralink_gpio_driver = {
-+	.probe = ralink_gpio_probe,
-+	.driver = {
-+		.name = "rt2880_gpio",
-+		.owner = THIS_MODULE,
-+		.of_match_table = ralink_gpio_match,
-+	},
-+};
-+
-+static int __init ralink_gpio_init(void)
-+{
-+	return platform_driver_register(&ralink_gpio_driver);
-+}
-+
-+subsys_initcall(ralink_gpio_init);
diff --git a/target/linux/ramips/patches-5.10/803-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch b/target/linux/ramips/patches-5.10/803-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch
deleted file mode 100644
index 8520ce32ff7b..000000000000
--- a/target/linux/ramips/patches-5.10/803-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 57fa7f2f4ef6f78ce1d30509c0d111aa3791b524 Mon Sep 17 00:00:00 2001
-From: Daniel Santos <daniel.santos@pobox.com>
-Date: Sun, 4 Nov 2018 20:24:32 -0600
-Subject: gpio-ralink: Add support for GPIO as interrupt-controller
-
-Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
----
- Documentation/devicetree/bindings/gpio/gpio-ralink.txt | 6 ++++++
- drivers/gpio/gpio-ralink.c                             | 2 +-
- 2 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-@@ -17,6 +17,9 @@ Required properties:
- 
- Optional properties:
- - ralink,gpio-base : Specify the GPIO chips base number
-+- interrupt-controller : marks this as an interrupt controller
-+- #interrupt-cells : a standard two-cell interrupt flag, see
-+  interrupt-controller/interrupts.txt
- 
- Example:
- 
-@@ -28,6 +31,9 @@ Example:
- 
- 		reg = <0x600 0x34>;
- 
-+		interrupt-controller;
-+		#interrupt-cells = <2>;
-+
- 		interrupt-parent = <&intc>;
- 		interrupts = <6>;
- 
---- a/drivers/gpio/gpio-ralink.c
-+++ b/drivers/gpio/gpio-ralink.c
-@@ -220,7 +220,7 @@ static int gpio_map(struct irq_domain *d
- }
- 
- static const struct irq_domain_ops irq_domain_ops = {
--	.xlate = irq_domain_xlate_onecell,
-+	.xlate = irq_domain_xlate_twocell,
- 	.map = gpio_map,
- };
- 
diff --git a/target/linux/ramips/patches-5.10/804-staging-mt7621-pinctrl-use-ngpios-not-num-gpios.patch b/target/linux/ramips/patches-5.10/804-staging-mt7621-pinctrl-use-ngpios-not-num-gpios.patch
deleted file mode 100644
index a15bf62b0b92..000000000000
--- a/target/linux/ramips/patches-5.10/804-staging-mt7621-pinctrl-use-ngpios-not-num-gpios.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
-+++ b/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
-@@ -356,7 +356,7 @@ static int rt2880_pinmux_probe(struct pl
- 		if (!of_device_is_available(np))
- 			continue;
- 
--		ngpio = of_get_property(np, "ralink,num-gpios", NULL);
-+		ngpio = of_get_property(np, "ngpios", NULL);
- 		gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
- 		if (!ngpio || !gpiobase) {
- 			dev_err(&pdev->dev, "failed to load chip info\n");
diff --git a/target/linux/ramips/patches-5.10/805-pinctrl-AW9523.patch b/target/linux/ramips/patches-5.10/805-pinctrl-AW9523.patch
deleted file mode 100644
index e80d0c99679c..000000000000
--- a/target/linux/ramips/patches-5.10/805-pinctrl-AW9523.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From: AngeloGioacchino Del Regno
-        <angelogioacchino.delregno@somainline.org>
-To: linus.walleij@linaro.org
-Cc: linux-kernel@vger.kernel.org, konrad.dybcio@somainline.org,
-        marijn.suijten@somainline.org, martin.botka@somainline.org,
-        phone-devel@vger.kernel.org, linux-gpio@vger.kernel.org,
-        devicetree@vger.kernel.org, robh+dt@kernel.org,
-        AngeloGioacchino Del Regno
-        <angelogioacchino.delregno@somainline.org>
-Subject: [PATCH v5 1/2] pinctrl: Add driver for Awinic AW9523/B I2C GPIO
- Expander
-Date: Mon, 25 Jan 2021 19:22:18 +0100
-
-The Awinic AW9523(B) is a multi-function I2C gpio expander in a
-TQFN-24L package, featuring PWM (max 37mA per pin, or total max
-power 3.2Watts) for LED driving capability.
-
-It has two ports with 8 pins per port (for a total of 16 pins),
-configurable as either PWM with 1/256 stepping or GPIO input/output,
-1.8V logic input; each GPIO can be configured as input or output
-independently from each other.
-
-This IC also has an internal interrupt controller, which is capable
-of generating an interrupt for each GPIO, depending on the
-configuration, and will raise an interrupt on the INTN pin to
-advertise this to an external interrupt controller.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
----
- drivers/pinctrl/Kconfig          |   17 +
- drivers/pinctrl/Makefile         |    1 +
- drivers/pinctrl/pinctrl-aw9523.c | 1122 ++++++++++++++++++++++++++++++
- 3 files changed, 1140 insertions(+)
- create mode 100644 drivers/pinctrl/pinctrl-aw9523.c
-
---- a/drivers/pinctrl/Kconfig
-+++ b/drivers/pinctrl/Kconfig
-@@ -110,6 +110,24 @@ config PINCTRL_AMD
- 	  Requires ACPI/FDT device enumeration code to set up a platform
- 	  device.
- 
-+config PINCTRL_AW9523
-+	bool "Awinic AW9523/AW9523B I2C GPIO expander pinctrl driver"
-+	depends on OF && I2C
-+	select PINMUX
-+	select PINCONF
-+	select GENERIC_PINCONF
-+	select GPIOLIB
-+	select GPIOLIB_IRQCHIP
-+	select REGMAP
-+	select REGMAP_I2C
-+	help
-+	  The Awinic AW9523/AW9523B is a multi-function I2C GPIO
-+	  expander with PWM functionality. This driver bundles a
-+	  pinctrl driver to select the function muxing and a GPIO
-+	  driver to handle GPIO, when the GPIO function is selected.
-+
-+	  Say yes to enable pinctrl and GPIO support for the AW9523(B).
-+
- config PINCTRL_BM1880
- 	bool "Bitmain BM1880 Pinctrl driver"
- 	depends on OF && (ARCH_BITMAIN || COMPILE_TEST)
---- a/drivers/pinctrl/Makefile
-+++ b/drivers/pinctrl/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_PINCTRL_AXP209)	+= pinctrl-
- obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
- obj-$(CONFIG_PINCTRL_AT91PIO4)	+= pinctrl-at91-pio4.o
- obj-$(CONFIG_PINCTRL_AMD)	+= pinctrl-amd.o
-+obj-$(CONFIG_PINCTRL_AW9523)	+= pinctrl-aw9523.o
- obj-$(CONFIG_PINCTRL_BM1880)	+= pinctrl-bm1880.o
- obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o
- obj-$(CONFIG_PINCTRL_DA9062)	+= pinctrl-da9062.o
diff --git a/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch
deleted file mode 100644
index 86f73c66230a..000000000000
--- a/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch
+++ /dev/null
@@ -1,245 +0,0 @@
-From 975e76214cd2516eb6cfff4c3eec581872645e88 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 19 Sep 2013 01:50:59 +0200
-Subject: [PATCH 31/53] uvc: add iPassion iP2970 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/media/usb/uvc/uvc_driver.c |   12 +++
- drivers/media/usb/uvc/uvc_status.c |    2 +
- drivers/media/usb/uvc/uvc_video.c  |  147 ++++++++++++++++++++++++++++++++++++
- drivers/media/usb/uvc/uvcvideo.h   |    5 +-
- 4 files changed, 165 insertions(+), 1 deletion(-)
-
---- a/drivers/media/usb/uvc/uvc_driver.c
-+++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -3012,6 +3012,18 @@ static const struct usb_device_id uvc_id
- 	  .bInterfaceSubClass	= 1,
- 	  .bInterfaceProtocol	= 0,
- 	  .driver_info		= UVC_INFO_META(V4L2_META_FMT_D4XX) },
-+	/* iPassion iP2970 */
-+	{ .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
-+				| USB_DEVICE_ID_MATCH_INT_INFO,
-+	 .idVendor		= 0x1B3B,
-+	 .idProduct		= 0x2970,
-+	 .bInterfaceClass	= USB_CLASS_VIDEO,
-+	 .bInterfaceSubClass	= 1,
-+	 .bInterfaceProtocol	= 0,
-+	 .driver_info		= UVC_QUIRK_PROBE_MINMAX
-+				| UVC_QUIRK_STREAM_NO_FID
-+				| UVC_QUIRK_MOTION
-+				| UVC_QUIRK_SINGLE_ISO },
- 	/* Generic USB Video Class */
- 	{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_UNDEFINED) },
- 	{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) },
---- a/drivers/media/usb/uvc/uvc_status.c
-+++ b/drivers/media/usb/uvc/uvc_status.c
-@@ -225,6 +225,7 @@ static void uvc_status_complete(struct u
- 			if (uvc_event_control(urb, status, len))
- 				/* The URB will be resubmitted in work context. */
- 				return;
-+			dev->motion = 1;
- 			break;
- 		}
- 
-@@ -273,6 +274,7 @@ int uvc_status_init(struct uvc_device *d
- 	}
- 
- 	pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
-+	dev->motion = 0;
- 
- 	/* For high-speed interrupt endpoints, the bInterval value is used as
- 	 * an exponent of two. Some developers forgot about it.
---- a/drivers/media/usb/uvc/uvc_video.c
-+++ b/drivers/media/usb/uvc/uvc_video.c
-@@ -16,6 +16,11 @@
- #include <linux/wait.h>
- #include <linux/atomic.h>
- #include <asm/unaligned.h>
-+#include <linux/skbuff.h>
-+#include <linux/kobject.h>
-+#include <linux/netlink.h>
-+#include <linux/kobject.h>
-+#include <linux/workqueue.h>
- 
- #include <media/v4l2-common.h>
- 
-@@ -1188,9 +1193,149 @@ static void uvc_video_decode_data(struct
- 	uvc_urb->async_operations++;
- }
- 
-+struct bh_priv {
-+	unsigned long	seen;
-+};
-+
-+struct bh_event {
-+	const char		*name;
-+	struct sk_buff		*skb;
-+	struct work_struct	work;
-+};
-+
-+#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args )
-+#define BH_DBG(fmt, args...) do {} while (0)
-+#define BH_SKB_SIZE     2048
-+
-+extern u64 uevent_next_seqnum(void);
-+static int seen = 0;
-+
-+static int bh_event_add_var(struct bh_event *event, int argv,
-+		const char *format, ...)
-+{
-+	static char buf[128];
-+	char *s;
-+	va_list args;
-+	int len;
-+
-+	if (argv)
-+		return 0;
-+
-+	va_start(args, format);
-+	len = vsnprintf(buf, sizeof(buf), format, args);
-+	va_end(args);
-+
-+	if (len >= sizeof(buf)) {
-+		BH_ERR("buffer size too small\n");
-+		WARN_ON(1);
-+		return -ENOMEM;
-+	}
-+
-+	s = skb_put(event->skb, len + 1);
-+	strcpy(s, buf);
-+
-+	BH_DBG("added variable '%s'\n", s);
-+
-+	return 0;
-+}
-+
-+static int motion_hotplug_fill_event(struct bh_event *event)
-+{
-+	int s = jiffies;
-+	int ret;
-+
-+	if (!seen)
-+		seen = jiffies;
-+
-+	ret = bh_event_add_var(event, 0, "HOME=%s", "/");
-+	if (ret)
-+		return ret;
-+
-+	ret = bh_event_add_var(event, 0, "PATH=%s",
-+		"/sbin:/bin:/usr/sbin:/usr/bin");
-+	if (ret)
-+		return ret;
-+
-+	ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb");
-+	if (ret)
-+		return ret;
-+
-+	ret = bh_event_add_var(event, 0, "ACTION=motion");
-+	if (ret)
-+		return ret;
-+
-+	ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen);
-+	if (ret)
-+		return ret;
-+	seen = s;
-+
-+	ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum());
-+
-+	return ret;
-+}
-+
-+static void motion_hotplug_work(struct work_struct *work)
-+{
-+	struct bh_event *event = container_of(work, struct bh_event, work);
-+	int ret = 0;
-+
-+	event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL);
-+	if (!event->skb)
-+		goto out_free_event;
-+
-+	ret = bh_event_add_var(event, 0, "%s@", "add");
-+	if (ret)
-+		goto out_free_skb;
-+
-+	ret = motion_hotplug_fill_event(event);
-+	if (ret)
-+		goto out_free_skb;
-+
-+	NETLINK_CB(event->skb).dst_group = 1;
-+	broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
-+
-+out_free_skb:
-+	if (ret) {
-+		BH_ERR("work error %d\n", ret);
-+		kfree_skb(event->skb);
-+	}
-+out_free_event:
-+	kfree(event);
-+}
-+
-+static int motion_hotplug_create_event(void)
-+{
-+	struct bh_event *event;
-+
-+	event = kzalloc(sizeof(*event), GFP_KERNEL);
-+	if (!event)
-+		return -ENOMEM;
-+
-+	event->name = "motion";
-+
-+	INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work);
-+	schedule_work(&event->work);
-+
-+	return 0;
-+}
-+
-+#define MOTION_FLAG_OFFSET	4
- static void uvc_video_decode_end(struct uvc_streaming *stream,
- 		struct uvc_buffer *buf, const u8 *data, int len)
- {
-+	if ((stream->dev->quirks & UVC_QUIRK_MOTION) &&
-+			(data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) {
-+		u8 *mem;
-+		buf->state = UVC_BUF_STATE_READY;
-+		mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET);
-+		if ( stream->dev->motion ) {
-+			stream->dev->motion = 0;
-+			motion_hotplug_create_event();
-+		} else {
-+			*mem &= 0x7f;
-+		}
-+	}
-+
- 	/* Mark the buffer as done if the EOF marker is set. */
- 	if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
- 		uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
-@@ -1749,6 +1894,8 @@ static int uvc_init_video_isoc(struct uv
- 	if (npackets == 0)
- 		return -ENOMEM;
- 
-+	if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO)
-+		npackets = 1;
- 	size = npackets * psize;
- 
- 	for_each_uvc_urb(uvc_urb, stream) {
---- a/drivers/media/usb/uvc/uvcvideo.h
-+++ b/drivers/media/usb/uvc/uvcvideo.h
-@@ -204,7 +204,8 @@
- #define UVC_QUIRK_FORCE_Y8		0x00000800
- #define UVC_QUIRK_FORCE_BPP		0x00001000
- #define UVC_QUIRK_WAKE_AUTOSUSPEND	0x00002000
--
-+#define UVC_QUIRK_MOTION		0x00004000
-+#define UVC_QUIRK_SINGLE_ISO		0x00008000
- /* Format flags */
- #define UVC_FMT_FLAG_COMPRESSED		0x00000001
- #define UVC_FMT_FLAG_STREAM		0x00000002
-@@ -674,6 +675,7 @@ struct uvc_device {
- 	u8 *status;
- 	struct input_dev *input;
- 	char input_phys[64];
-+	int motion;
- 
- 	struct uvc_ctrl_work {
- 		struct work_struct work;
diff --git a/target/linux/ramips/patches-5.10/820-DT-Add-documentation-for-spi-rt2880.patch b/target/linux/ramips/patches-5.10/820-DT-Add-documentation-for-spi-rt2880.patch
deleted file mode 100644
index e2643e3f2544..000000000000
--- a/target/linux/ramips/patches-5.10/820-DT-Add-documentation-for-spi-rt2880.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From da6015e7f19d749f135f7ac55c4ec47b06faa868 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Aug 2013 20:12:59 +0200
-Subject: [PATCH 41/53] DT: Add documentation for spi-rt2880
-
-Describe the SPI master found on the MIPS based Ralink RT2880 SoC.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../devicetree/bindings/spi/spi-rt2880.txt         |   28 ++++++++++++++++++++
- 1 file changed, 28 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
-@@ -0,0 +1,28 @@
-+Ralink SoC RT2880 SPI master controller.
-+
-+This SPI controller is found on most wireless SoCs made by ralink.
-+
-+Required properties:
-+- compatible : "ralink,rt2880-spi"
-+- reg : The register base for the controller.
-+- #address-cells : <1>, as required by generic SPI binding.
-+- #size-cells : <0>, also as required by generic SPI binding.
-+
-+Child nodes as per the generic SPI binding.
-+
-+Example:
-+
-+	spi@b00 {
-+		compatible = "ralink,rt2880-spi";
-+		reg = <0xb00 0x100>;
-+
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		m25p80@0 {
-+			compatible = "m25p80";
-+			reg = <0>;
-+			spi-max-frequency = <10000000>;
-+		};
-+	};
-+
diff --git a/target/linux/ramips/patches-5.10/821-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-5.10/821-SPI-ralink-add-Ralink-SoC-spi-driver.patch
deleted file mode 100644
index 56c8f58ce749..000000000000
--- a/target/linux/ramips/patches-5.10/821-SPI-ralink-add-Ralink-SoC-spi-driver.patch
+++ /dev/null
@@ -1,574 +0,0 @@
-From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 11:15:12 +0100
-Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver
-
-Add the driver needed to make SPI work on Ralink SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: John Crispin <blogic@openwrt.org>
----
- drivers/spi/Kconfig      |    6 +
- drivers/spi/Makefile     |    1 +
- drivers/spi/spi-rt2880.c |  530 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 537 insertions(+)
- create mode 100644 drivers/spi/spi-rt2880.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -688,6 +688,12 @@ config SPI_QCOM_GENI
- 	  This driver can also be built as a module.  If so, the module
- 	  will be called spi-geni-qcom.
- 
-+config SPI_RT2880
-+	tristate "Ralink RT288x SPI Controller"
-+	depends on RALINK
-+	help
-+	  This selects a driver for the Ralink RT288x/RT305x SPI Controller.
-+
- config SPI_S3C24XX
- 	tristate "Samsung S3C24XX series SPI"
- 	depends on ARCH_S3C24XX
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -96,6 +96,7 @@ obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockc
- obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
- obj-$(CONFIG_SPI_RPCIF)			+= spi-rpc-if.o
- obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
-+obj-$(CONFIG_SPI_RT2880)		+= spi-rt2880.o
- obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y			:= spi-s3c24xx.o
- obj-$(CONFIG_SPI_S3C64XX)		+= spi-s3c64xx.o
---- /dev/null
-+++ b/drivers/spi/spi-rt2880.c
-@@ -0,0 +1,530 @@
-+/*
-+ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
-+ *
-+ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
-+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Some parts are based on spi-orion.c:
-+ *   Author: Shadi Ammouri <shadi@marvell.com>
-+ *   Copyright (C) 2007-2008 Marvell Ltd.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/reset.h>
-+#include <linux/spi/spi.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+
-+#define DRIVER_NAME			"spi-rt2880"
-+
-+#define RAMIPS_SPI_STAT			0x00
-+#define RAMIPS_SPI_CFG			0x10
-+#define RAMIPS_SPI_CTL			0x14
-+#define RAMIPS_SPI_DATA			0x20
-+#define RAMIPS_SPI_ADDR			0x24
-+#define RAMIPS_SPI_BS			0x28
-+#define RAMIPS_SPI_USER			0x2C
-+#define RAMIPS_SPI_TXFIFO		0x30
-+#define RAMIPS_SPI_RXFIFO		0x34
-+#define RAMIPS_SPI_FIFO_STAT		0x38
-+#define RAMIPS_SPI_MODE			0x3C
-+#define RAMIPS_SPI_DEV_OFFSET		0x40
-+#define RAMIPS_SPI_DMA			0x80
-+#define RAMIPS_SPI_DMASTAT		0x84
-+#define RAMIPS_SPI_ARBITER		0xF0
-+
-+/* SPISTAT register bit field */
-+#define SPISTAT_BUSY			BIT(0)
-+
-+/* SPICFG register bit field */
-+#define SPICFG_ADDRMODE			BIT(12)
-+#define SPICFG_RXENVDIS			BIT(11)
-+#define SPICFG_RXCAP			BIT(10)
-+#define SPICFG_SPIENMODE		BIT(9)
-+#define SPICFG_MSBFIRST			BIT(8)
-+#define SPICFG_SPICLKPOL		BIT(6)
-+#define SPICFG_RXCLKEDGE_FALLING	BIT(5)
-+#define SPICFG_TXCLKEDGE_FALLING	BIT(4)
-+#define SPICFG_HIZSPI			BIT(3)
-+#define SPICFG_SPICLK_PRESCALE_MASK	0x7
-+#define SPICFG_SPICLK_DIV2		0
-+#define SPICFG_SPICLK_DIV4		1
-+#define SPICFG_SPICLK_DIV8		2
-+#define SPICFG_SPICLK_DIV16		3
-+#define SPICFG_SPICLK_DIV32		4
-+#define SPICFG_SPICLK_DIV64		5
-+#define SPICFG_SPICLK_DIV128		6
-+#define SPICFG_SPICLK_DISABLE		7
-+
-+/* SPICTL register bit field */
-+#define SPICTL_START			BIT(4)
-+#define SPICTL_HIZSDO			BIT(3)
-+#define SPICTL_STARTWR			BIT(2)
-+#define SPICTL_STARTRD			BIT(1)
-+#define SPICTL_SPIENA			BIT(0)
-+
-+/* SPIUSER register bit field */
-+#define SPIUSER_USERMODE		BIT(21)
-+#define SPIUSER_INSTR_PHASE		BIT(20)
-+#define SPIUSER_ADDR_PHASE_MASK		0x7
-+#define SPIUSER_ADDR_PHASE_OFFSET	17
-+#define SPIUSER_MODE_PHASE		BIT(16)
-+#define SPIUSER_DUMMY_PHASE_MASK	0x3
-+#define SPIUSER_DUMMY_PHASE_OFFSET	14
-+#define SPIUSER_DATA_PHASE_MASK		0x3
-+#define SPIUSER_DATA_PHASE_OFFSET	12
-+#define SPIUSER_DATA_READ		(BIT(0) << SPIUSER_DATA_PHASE_OFFSET)
-+#define SPIUSER_DATA_WRITE		(BIT(1) << SPIUSER_DATA_PHASE_OFFSET)
-+#define SPIUSER_ADDR_TYPE_OFFSET	9
-+#define SPIUSER_MODE_TYPE_OFFSET	6
-+#define SPIUSER_DUMMY_TYPE_OFFSET	3
-+#define SPIUSER_DATA_TYPE_OFFSET	0
-+#define SPIUSER_TRANSFER_MASK		0x7
-+#define SPIUSER_TRANSFER_SINGLE		BIT(0)
-+#define SPIUSER_TRANSFER_DUAL		BIT(1)
-+#define SPIUSER_TRANSFER_QUAD		BIT(2)
-+
-+#define SPIUSER_TRANSFER_TYPE(type) ( \
-+	(type << SPIUSER_ADDR_TYPE_OFFSET) | \
-+	(type << SPIUSER_MODE_TYPE_OFFSET) | \
-+	(type << SPIUSER_DUMMY_TYPE_OFFSET) | \
-+	(type << SPIUSER_DATA_TYPE_OFFSET) \
-+)
-+
-+/* SPIFIFOSTAT register bit field */
-+#define SPIFIFOSTAT_TXEMPTY		BIT(19)
-+#define SPIFIFOSTAT_RXEMPTY		BIT(18)
-+#define SPIFIFOSTAT_TXFULL		BIT(17)
-+#define SPIFIFOSTAT_RXFULL		BIT(16)
-+#define SPIFIFOSTAT_FIFO_MASK		0xff
-+#define SPIFIFOSTAT_TX_OFFSET		8
-+#define SPIFIFOSTAT_RX_OFFSET		0
-+
-+#define SPI_FIFO_DEPTH			16
-+
-+/* SPIMODE register bit field */
-+#define SPIMODE_MODE_OFFSET		24
-+#define SPIMODE_DUMMY_OFFSET		0
-+
-+/* SPIARB register bit field */
-+#define SPICTL_ARB_EN			BIT(31)
-+#define SPICTL_CSCTL1			BIT(16)
-+#define SPI1_POR			BIT(1)
-+#define SPI0_POR			BIT(0)
-+
-+#define RT2880_SPI_MODE_BITS	(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \
-+		SPI_CS_HIGH)
-+
-+static atomic_t hw_reset_count = ATOMIC_INIT(0);
-+
-+struct rt2880_spi {
-+	struct spi_master	*master;
-+	void __iomem		*base;
-+	u32			speed;
-+	u16			wait_loops;
-+	u16			mode;
-+	struct clk		*clk;
-+};
-+
-+static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
-+{
-+	return spi_master_get_devdata(spi->master);
-+}
-+
-+static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
-+{
-+	return ioread32(rs->base + reg);
-+}
-+
-+static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg,
-+		const u32 val)
-+{
-+	iowrite32(val, rs->base + reg);
-+}
-+
-+static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
-+{
-+	void __iomem *addr = rs->base + reg;
-+
-+	iowrite32((ioread32(addr) | mask), addr);
-+}
-+
-+static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
-+{
-+	void __iomem *addr = rs->base + reg;
-+
-+	iowrite32((ioread32(addr) & ~mask), addr);
-+}
-+
-+static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed)
-+{
-+	struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+	u32 rate;
-+	u32 prescale;
-+
-+	/*
-+	 * the supported rates are: 2, 4, 8, ... 128
-+	 * round up as we look for equal or less speed
-+	 */
-+	rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed);
-+	rate = roundup_pow_of_two(rate);
-+
-+	/* Convert the rate to SPI clock divisor value.	*/
-+	prescale = ilog2(rate / 2);
-+
-+	/* some tolerance. double and add 100 */
-+	rs->wait_loops = (8 * HZ * loops_per_jiffy) /
-+		(clk_get_rate(rs->clk) / rate);
-+	rs->wait_loops = (rs->wait_loops << 1) + 100;
-+	rs->speed = speed;
-+
-+	dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n",
-+			clk_get_rate(rs->clk) / rate, speed, rate, prescale,
-+			rs->wait_loops);
-+
-+	return prescale;
-+}
-+
-+static u32 get_arbiter_offset(struct spi_master *master)
-+{
-+	u32 offset;
-+
-+	offset = RAMIPS_SPI_ARBITER;
-+	if (master->bus_num == 1)
-+		offset -= RAMIPS_SPI_DEV_OFFSET;
-+
-+	return offset;
-+}
-+
-+static void rt2880_spi_set_cs(struct spi_device *spi, bool enable)
-+{
-+	struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+
-+	if (enable)
-+		rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+	else
-+		rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+}
-+
-+static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len)
-+{
-+	int loop = rs->wait_loops * len;
-+
-+	while ((rt2880_spi_read(rs, RAMIPS_SPI_STAT) & SPISTAT_BUSY) && --loop)
-+		cpu_relax();
-+
-+	if (loop)
-+		return 0;
-+
-+	return -ETIMEDOUT;
-+}
-+
-+static void rt2880_dump_reg(struct spi_master *master)
-+{
-+	struct rt2880_spi *rs = spi_master_get_devdata(master);
-+
-+	dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \
-+			"data: %08x, arb: %08x\n",
-+			rt2880_spi_read(rs, RAMIPS_SPI_STAT),
-+			rt2880_spi_read(rs, RAMIPS_SPI_CFG),
-+			rt2880_spi_read(rs, RAMIPS_SPI_CTL),
-+			rt2880_spi_read(rs, RAMIPS_SPI_DATA),
-+			rt2880_spi_read(rs, get_arbiter_offset(master)));
-+}
-+
-+static int rt2880_spi_transfer_one(struct spi_master *master,
-+		struct spi_device *spi, struct spi_transfer *xfer)
-+{
-+	struct rt2880_spi *rs = spi_master_get_devdata(master);
-+	unsigned len;
-+	const u8 *tx = xfer->tx_buf;
-+	u8 *rx = xfer->rx_buf;
-+	int err = 0;
-+
-+	/* change clock speed  */
-+	if (unlikely(rs->speed != xfer->speed_hz)) {
-+		u32 reg;
-+		reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
-+		reg &= ~SPICFG_SPICLK_PRESCALE_MASK;
-+		reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz);
-+		rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
-+	}
-+
-+	if (tx) {
-+		len = xfer->len;
-+		while (len-- > 0) {
-+			rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++);
-+			rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
-+			err = rt2880_spi_wait_ready(rs, 1);
-+			if (err) {
-+				dev_err(&spi->dev, "TX failed, err=%d\n", err);
-+				goto out;
-+			}
-+		}
-+	}
-+
-+	if (rx) {
-+		len = xfer->len;
-+		while (len-- > 0) {
-+			rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
-+			err = rt2880_spi_wait_ready(rs, 1);
-+			if (err) {
-+				dev_err(&spi->dev, "RX failed, err=%d\n", err);
-+				goto out;
-+			}
-+			*rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
-+		}
-+	}
-+
-+out:
-+	return err;
-+}
-+
-+/* copy from spi.c */
-+static void spi_set_cs(struct spi_device *spi, bool enable)
-+{
-+	if (spi->mode & SPI_CS_HIGH)
-+		enable = !enable;
-+
-+	if (spi->cs_gpio >= 0)
-+		gpio_set_value(spi->cs_gpio, !enable);
-+	else if (spi->master->set_cs)
-+		spi->master->set_cs(spi, !enable);
-+}
-+
-+static int rt2880_spi_setup(struct spi_device *spi)
-+{
-+	struct spi_master *master = spi->master;
-+	struct rt2880_spi *rs = spi_master_get_devdata(master);
-+	u32 reg, old_reg, arbit_off;
-+
-+	if ((spi->max_speed_hz > master->max_speed_hz) ||
-+			(spi->max_speed_hz < master->min_speed_hz)) {
-+		dev_err(&spi->dev, "invalide requested speed %d Hz\n",
-+				spi->max_speed_hz);
-+		return -EINVAL;
-+	}
-+
-+	if (!(master->bits_per_word_mask &
-+				BIT(spi->bits_per_word - 1))) {
-+		dev_err(&spi->dev, "invalide bits_per_word %d\n",
-+				spi->bits_per_word);
-+		return -EINVAL;
-+	}
-+
-+	/* the hardware seems can't work on mode0 force it to mode3 */
-+	if ((spi->mode & (SPI_CPOL | SPI_CPHA)) == SPI_MODE_0) {
-+		dev_warn(&spi->dev, "force spi mode3\n");
-+		spi->mode |= SPI_MODE_3;
-+	}
-+
-+	/* chip polarity */
-+	arbit_off = get_arbiter_offset(master);
-+	reg = old_reg = rt2880_spi_read(rs, arbit_off);
-+	if (spi->mode & SPI_CS_HIGH) {
-+		switch (master->bus_num) {
-+		case 1:
-+			reg |= SPI1_POR;
-+			break;
-+		default:
-+			reg |= SPI0_POR;
-+			break;
-+		}
-+	} else {
-+		switch (master->bus_num) {
-+		case 1:
-+			reg &= ~SPI1_POR;
-+			break;
-+		default:
-+			reg &= ~SPI0_POR;
-+			break;
-+		}
-+	}
-+
-+	/* enable spi1 */
-+	if (master->bus_num == 1)
-+		reg |= SPICTL_ARB_EN;
-+
-+	if (reg != old_reg)
-+		rt2880_spi_write(rs, arbit_off, reg);
-+
-+	/* deselected the spi device */
-+	spi_set_cs(spi, false);
-+
-+	rt2880_dump_reg(master);
-+
-+	return 0;
-+}
-+
-+static int rt2880_spi_prepare_message(struct spi_master *master,
-+		struct spi_message *msg)
-+{
-+	struct rt2880_spi *rs = spi_master_get_devdata(master);
-+	struct spi_device *spi = msg->spi;
-+	u32 reg;
-+
-+	if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz))
-+		return 0;
-+
-+#if 0
-+	/* set spido to tri-state */
-+	rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO);
-+#endif
-+
-+	reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
-+
-+	reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL |
-+			SPICFG_RXCLKEDGE_FALLING |
-+			SPICFG_TXCLKEDGE_FALLING |
-+			SPICFG_SPICLK_PRESCALE_MASK);
-+
-+	/* MSB */
-+	if (!(spi->mode & SPI_LSB_FIRST))
-+		reg |= SPICFG_MSBFIRST;
-+
-+	/* spi mode */
-+	switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
-+	case SPI_MODE_0:
-+		reg |= SPICFG_TXCLKEDGE_FALLING;
-+		break;
-+	case SPI_MODE_1:
-+		reg |= SPICFG_RXCLKEDGE_FALLING;
-+		break;
-+	case SPI_MODE_2:
-+		reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
-+		break;
-+	case SPI_MODE_3:
-+		reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
-+		break;
-+	}
-+	rs->mode = spi->mode;
-+
-+#if 0
-+	/* set spiclk and spiena to tri-state */
-+	reg |= SPICFG_HIZSPI;
-+#endif
-+
-+	/* clock divide */
-+	reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz);
-+
-+	rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
-+
-+	return 0;
-+}
-+
-+static int rt2880_spi_probe(struct platform_device *pdev)
-+{
-+	struct spi_master *master;
-+	struct rt2880_spi *rs;
-+	void __iomem *base;
-+	struct resource *r;
-+	struct clk *clk;
-+	int ret;
-+
-+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	base = devm_ioremap_resource(&pdev->dev, r);
-+	if (IS_ERR(base))
-+		return PTR_ERR(base);
-+
-+	clk = devm_clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(clk)) {
-+		dev_err(&pdev->dev, "unable to get SYS clock\n");
-+		return PTR_ERR(clk);
-+	}
-+
-+	ret = clk_prepare_enable(clk);
-+	if (ret)
-+		goto err_clk;
-+
-+	master = spi_alloc_master(&pdev->dev, sizeof(*rs));
-+	if (master == NULL) {
-+		dev_dbg(&pdev->dev, "master allocation failed\n");
-+		ret = -ENOMEM;
-+		goto err_clk;
-+	}
-+
-+	master->dev.of_node = pdev->dev.of_node;
-+	master->mode_bits = RT2880_SPI_MODE_BITS;
-+	master->bits_per_word_mask = SPI_BPW_MASK(8);
-+	master->min_speed_hz = clk_get_rate(clk) / 128;
-+	master->max_speed_hz = clk_get_rate(clk) / 2;
-+	master->flags = SPI_MASTER_HALF_DUPLEX;
-+	master->setup = rt2880_spi_setup;
-+	master->prepare_message = rt2880_spi_prepare_message;
-+	master->set_cs = rt2880_spi_set_cs;
-+	master->transfer_one = rt2880_spi_transfer_one,
-+
-+	dev_set_drvdata(&pdev->dev, master);
-+
-+	rs = spi_master_get_devdata(master);
-+	rs->master = master;
-+	rs->base = base;
-+	rs->clk = clk;
-+
-+	if (atomic_inc_return(&hw_reset_count) == 1)
-+		device_reset(&pdev->dev);
-+
-+	ret = devm_spi_register_master(&pdev->dev, master);
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "devm_spi_register_master error.\n");
-+		goto err_master;
-+	}
-+
-+	return ret;
-+
-+err_master:
-+	spi_master_put(master);
-+	kfree(master);
-+err_clk:
-+	clk_disable_unprepare(clk);
-+
-+	return ret;
-+}
-+
-+static int rt2880_spi_remove(struct platform_device *pdev)
-+{
-+	struct spi_master *master;
-+	struct rt2880_spi *rs;
-+
-+	master = dev_get_drvdata(&pdev->dev);
-+	rs = spi_master_get_devdata(master);
-+
-+	clk_disable_unprepare(rs->clk);
-+	atomic_dec(&hw_reset_count);
-+
-+	return 0;
-+}
-+
-+MODULE_ALIAS("platform:" DRIVER_NAME);
-+
-+static const struct of_device_id rt2880_spi_match[] = {
-+	{ .compatible = "ralink,rt2880-spi" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, rt2880_spi_match);
-+
-+static struct platform_driver rt2880_spi_driver = {
-+	.driver = {
-+		.name = DRIVER_NAME,
-+		.owner = THIS_MODULE,
-+		.of_match_table = rt2880_spi_match,
-+	},
-+	.probe = rt2880_spi_probe,
-+	.remove = rt2880_spi_remove,
-+};
-+
-+module_platform_driver(rt2880_spi_driver);
-+
-+MODULE_DESCRIPTION("Ralink SPI driver");
-+MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-5.10/825-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-5.10/825-i2c-MIPS-adds-ralink-I2C-driver.patch
deleted file mode 100644
index 7fdbceac094f..000000000000
--- a/target/linux/ramips/patches-5.10/825-i2c-MIPS-adds-ralink-I2C-driver.patch
+++ /dev/null
@@ -1,507 +0,0 @@
-From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:52:56 +0100
-Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../devicetree/bindings/i2c/i2c-ralink.txt         |   27 ++
- drivers/i2c/busses/Kconfig                         |    4 +
- drivers/i2c/busses/Makefile                        |    1 +
- drivers/i2c/busses/i2c-ralink.c                    |  327 ++++++++++++++++++++
- 4 files changed, 359 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
- create mode 100644 drivers/i2c/busses/i2c-ralink.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
-@@ -0,0 +1,27 @@
-+I2C for Ralink platforms
-+
-+Required properties :
-+- compatible : Must be "link,rt3052-i2c"
-+- reg: physical base address of the controller and length of memory mapped
-+     region.
-+- #address-cells = <1>;
-+- #size-cells = <0>;
-+
-+Optional properties:
-+- Child nodes conforming to i2c bus binding
-+
-+Example :
-+
-+palmbus@10000000 {
-+	i2c@900 {
-+		compatible = "link,rt3052-i2c";
-+		reg = <0x900 0x100>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		hwmon@4b {
-+			compatible = "national,lm92";
-+			reg = <0x4b>;
-+		};
-+	};
-+};
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -954,6 +954,11 @@ config I2C_RK3X
- 	  This driver can also be built as a module. If so, the module will
- 	  be called i2c-rk3x.
- 
-+config I2C_RALINK
-+	tristate "Ralink I2C Controller"
-+	depends on RALINK && !SOC_MT7621
-+	select OF_I2C
-+
- config HAVE_S3C2410_I2C
- 	bool
- 	help
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -90,6 +90,7 @@ obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
- obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
- obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
- obj-$(CONFIG_I2C_PXA_PCI)	+= i2c-pxa-pci.o
-+obj-$(CONFIG_I2C_RALINK)	+= i2c-ralink.o
- obj-$(CONFIG_I2C_QCOM_CCI)	+= i2c-qcom-cci.o
- obj-$(CONFIG_I2C_QCOM_GENI)	+= i2c-qcom-geni.o
- obj-$(CONFIG_I2C_QUP)		+= i2c-qup.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-ralink.c
-@@ -0,0 +1,435 @@
-+/*
-+ * drivers/i2c/busses/i2c-ralink.c
-+ *
-+ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
-+ * Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
-+ *
-+ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
-+ * (C) 2014 Sittisak <sittisaks@hotmail.com>
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/reset.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_platform.h>
-+#include <linux/i2c.h>
-+#include <linux/io.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+
-+#define REG_CONFIG_REG		0x00
-+#define REG_CLKDIV_REG		0x04
-+#define REG_DEVADDR_REG		0x08
-+#define REG_ADDR_REG		0x0C
-+#define REG_DATAOUT_REG		0x10
-+#define REG_DATAIN_REG		0x14
-+#define REG_STATUS_REG		0x18
-+#define REG_STARTXFR_REG	0x1C
-+#define REG_BYTECNT_REG		0x20
-+
-+/* REG_CONFIG_REG */
-+#define I2C_ADDRLEN_OFFSET	5
-+#define I2C_DEVADLEN_OFFSET	2
-+#define I2C_ADDRLEN_MASK	0x3
-+#define I2C_ADDR_DIS		BIT(1)
-+#define I2C_DEVADDR_DIS		BIT(0)
-+#define I2C_ADDRLEN_8		(7 << I2C_ADDRLEN_OFFSET)
-+#define I2C_DEVADLEN_7		(6 << I2C_DEVADLEN_OFFSET)
-+#define I2C_CONF_DEFAULT	(I2C_ADDRLEN_8 | I2C_DEVADLEN_7)
-+
-+/* REG_CLKDIV_REG */
-+#define I2C_CLKDIV_MASK		0xffff
-+
-+/* REG_DEVADDR_REG */
-+#define I2C_DEVADDR_MASK	0x7f
-+
-+/* REG_ADDR_REG */
-+#define I2C_ADDR_MASK		0xff
-+
-+/* REG_STATUS_REG */
-+#define I2C_STARTERR		BIT(4)
-+#define I2C_ACKERR		BIT(3)
-+#define I2C_DATARDY		BIT(2)
-+#define I2C_SDOEMPTY		BIT(1)
-+#define I2C_BUSY		BIT(0)
-+
-+/* REG_STARTXFR_REG */
-+#define NOSTOP_CMD		BIT(2)
-+#define NODATA_CMD		BIT(1)
-+#define READ_CMD		BIT(0)
-+
-+/* REG_BYTECNT_REG */
-+#define BYTECNT_MAX		64
-+#define SET_BYTECNT(x)		(x - 1)
-+
-+/* timeout waiting for I2C devices to respond (clock streching) */
-+#define TIMEOUT_MS              1000
-+#define DELAY_INTERVAL_US       100
-+
-+struct rt_i2c {
-+	void __iomem *base;
-+	struct clk *clk;
-+	struct device *dev;
-+	struct i2c_adapter adap;
-+	u32 cur_clk;
-+	u32 clk_div;
-+	u32 flags;
-+};
-+
-+static void rt_i2c_w32(struct rt_i2c *i2c, u32 val, unsigned reg)
-+{
-+	iowrite32(val, i2c->base + reg);
-+}
-+
-+static u32 rt_i2c_r32(struct rt_i2c *i2c, unsigned reg)
-+{
-+	return ioread32(i2c->base + reg);
-+}
-+
-+static int poll_down_timeout(void __iomem *addr, u32 mask)
-+{
-+	unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
-+
-+	do {
-+		if (!(readl_relaxed(addr) & mask))
-+			return 0;
-+
-+		usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
-+	} while (time_before(jiffies, timeout));
-+
-+	return (readl_relaxed(addr) & mask) ? -EAGAIN : 0;
-+}
-+
-+static int rt_i2c_wait_idle(struct rt_i2c *i2c)
-+{
-+	int ret;
-+
-+	ret = poll_down_timeout(i2c->base + REG_STATUS_REG, I2C_BUSY);
-+	if (ret < 0)
-+		dev_dbg(i2c->dev, "idle err(%d)\n", ret);
-+
-+	return ret;
-+}
-+
-+static int poll_up_timeout(void __iomem *addr, u32 mask)
-+{
-+	unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
-+	u32 status;
-+
-+	do {
-+		status = readl_relaxed(addr);
-+
-+		/* check error status */
-+		if (status & I2C_STARTERR)
-+			return -EAGAIN;
-+		else if (status & I2C_ACKERR)
-+			return -ENXIO;
-+		else if (status & mask)
-+			return 0;
-+
-+		usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
-+	} while (time_before(jiffies, timeout));
-+
-+	return -ETIMEDOUT;
-+}
-+
-+static int rt_i2c_wait_rx_done(struct rt_i2c *i2c)
-+{
-+	int ret;
-+
-+	ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_DATARDY);
-+	if (ret < 0)
-+		dev_dbg(i2c->dev, "rx err(%d)\n", ret);
-+
-+	return ret;
-+}
-+
-+static int rt_i2c_wait_tx_done(struct rt_i2c *i2c)
-+{
-+	int ret;
-+
-+	ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_SDOEMPTY);
-+	if (ret < 0)
-+		dev_dbg(i2c->dev, "tx err(%d)\n", ret);
-+
-+	return ret;
-+}
-+
-+static void rt_i2c_reset(struct rt_i2c *i2c)
-+{
-+	device_reset(i2c->adap.dev.parent);
-+	barrier();
-+	rt_i2c_w32(i2c, i2c->clk_div, REG_CLKDIV_REG);
-+}
-+
-+static void rt_i2c_dump_reg(struct rt_i2c *i2c)
-+{
-+	dev_dbg(i2c->dev, "conf %08x, clkdiv %08x, devaddr %08x, " \
-+			"addr %08x, dataout %08x, datain %08x, " \
-+			"status %08x, startxfr %08x, bytecnt %08x\n",
-+			rt_i2c_r32(i2c, REG_CONFIG_REG),
-+			rt_i2c_r32(i2c, REG_CLKDIV_REG),
-+			rt_i2c_r32(i2c, REG_DEVADDR_REG),
-+			rt_i2c_r32(i2c, REG_ADDR_REG),
-+			rt_i2c_r32(i2c, REG_DATAOUT_REG),
-+			rt_i2c_r32(i2c, REG_DATAIN_REG),
-+			rt_i2c_r32(i2c, REG_STATUS_REG),
-+			rt_i2c_r32(i2c, REG_STARTXFR_REG),
-+			rt_i2c_r32(i2c, REG_BYTECNT_REG));
-+}
-+
-+static int rt_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
-+		int num)
-+{
-+	struct rt_i2c *i2c;
-+	struct i2c_msg *pmsg;
-+	unsigned char addr;
-+	int i, j, ret;
-+	u32 cmd;
-+
-+	i2c = i2c_get_adapdata(adap);
-+
-+	for (i = 0; i < num; i++) {
-+		pmsg = &msgs[i];
-+		if (i == (num - 1))
-+			cmd = 0;
-+		else
-+			cmd = NOSTOP_CMD;
-+
-+		dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x, stop: %d\n",
-+				pmsg->addr, pmsg->len, pmsg->flags,
-+				(cmd == 0)? 1 : 0);
-+
-+		/* wait hardware idle */
-+		if ((ret = rt_i2c_wait_idle(i2c)))
-+			goto err_timeout;
-+
-+		if (pmsg->flags & I2C_M_TEN) {
-+			rt_i2c_w32(i2c, I2C_CONF_DEFAULT, REG_CONFIG_REG);
-+			/* 10 bits address */
-+			addr = 0x78 | ((pmsg->addr >> 8) & 0x03);
-+			rt_i2c_w32(i2c, addr & I2C_DEVADDR_MASK,
-+					REG_DEVADDR_REG);
-+			rt_i2c_w32(i2c, pmsg->addr & I2C_ADDR_MASK,
-+					REG_ADDR_REG);
-+		} else {
-+			rt_i2c_w32(i2c, I2C_CONF_DEFAULT | I2C_ADDR_DIS,
-+					REG_CONFIG_REG);
-+			/* 7 bits address */
-+			rt_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK,
-+					REG_DEVADDR_REG);
-+		}
-+
-+		/* buffer length */
-+		if (pmsg->len == 0)
-+			cmd |= NODATA_CMD;
-+		else
-+			rt_i2c_w32(i2c, SET_BYTECNT(pmsg->len),
-+					REG_BYTECNT_REG);
-+
-+		j = 0;
-+		if (pmsg->flags & I2C_M_RD) {
-+			cmd |= READ_CMD;
-+			/* start transfer */
-+			barrier();
-+			rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
-+			do {
-+				/* wait */
-+				if ((ret = rt_i2c_wait_rx_done(i2c)))
-+					goto err_timeout;
-+				/* read data */
-+				if (pmsg->len)
-+					pmsg->buf[j] = rt_i2c_r32(i2c,
-+							REG_DATAIN_REG);
-+				j++;
-+			} while (j < pmsg->len);
-+		} else {
-+			do {
-+				/* write data */
-+				if (pmsg->len)
-+					rt_i2c_w32(i2c, pmsg->buf[j],
-+							REG_DATAOUT_REG);
-+				/* start transfer */
-+				if (j == 0) {
-+					barrier();
-+					rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
-+				}
-+				/* wait */
-+				if ((ret = rt_i2c_wait_tx_done(i2c)))
-+					goto err_timeout;
-+				j++;
-+			} while (j < pmsg->len);
-+		}
-+	}
-+	/* the return value is number of executed messages */
-+	ret = i;
-+
-+	return ret;
-+
-+err_timeout:
-+	rt_i2c_dump_reg(i2c);
-+	rt_i2c_reset(i2c);
-+	return ret;
-+}
-+
-+static u32 rt_i2c_func(struct i2c_adapter *a)
-+{
-+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static const struct i2c_algorithm rt_i2c_algo = {
-+	.master_xfer	= rt_i2c_master_xfer,
-+	.functionality	= rt_i2c_func,
-+};
-+
-+static const struct of_device_id i2c_rt_dt_ids[] = {
-+	{ .compatible = "ralink,rt2880-i2c" },
-+	{ /* sentinel */ }
-+};
-+
-+MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
-+
-+static struct i2c_adapter_quirks rt_i2c_quirks = {
-+        .max_write_len = BYTECNT_MAX,
-+        .max_read_len = BYTECNT_MAX,
-+};
-+
-+static int rt_i2c_init(struct rt_i2c *i2c)
-+{
-+	u32 reg;
-+
-+	/* i2c_sclk = periph_clk / ((2 * clk_div) + 5) */
-+	i2c->clk_div = (clk_get_rate(i2c->clk) - (5 * i2c->cur_clk)) /
-+		(2 * i2c->cur_clk);
-+	if (i2c->clk_div < 8)
-+		i2c->clk_div = 8;
-+	if (i2c->clk_div > I2C_CLKDIV_MASK)
-+		i2c->clk_div = I2C_CLKDIV_MASK;
-+
-+	/* check support combinde/repeated start message */
-+	rt_i2c_w32(i2c, NOSTOP_CMD, REG_STARTXFR_REG);
-+	reg = rt_i2c_r32(i2c, REG_STARTXFR_REG) & NOSTOP_CMD;
-+
-+	rt_i2c_reset(i2c);
-+
-+	return reg;
-+}
-+
-+static int rt_i2c_probe(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+	struct rt_i2c *i2c;
-+	struct i2c_adapter *adap;
-+	const struct of_device_id *match;
-+	int ret, restart;
-+
-+	match = of_match_device(i2c_rt_dt_ids, &pdev->dev);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		dev_err(&pdev->dev, "no memory resource found\n");
-+		return -ENODEV;
-+	}
-+
-+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct rt_i2c), GFP_KERNEL);
-+	if (!i2c) {
-+		dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
-+		return -ENOMEM;
-+	}
-+
-+	i2c->base = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(i2c->base))
-+		return PTR_ERR(i2c->base);
-+
-+	i2c->clk = devm_clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(i2c->clk)) {
-+		dev_err(&pdev->dev, "no clock defined\n");
-+		return -ENODEV;
-+	}
-+	clk_prepare_enable(i2c->clk);
-+	i2c->dev = &pdev->dev;
-+
-+	if (of_property_read_u32(pdev->dev.of_node,
-+				"clock-frequency", &i2c->cur_clk))
-+		i2c->cur_clk = 100000;
-+
-+	adap = &i2c->adap;
-+	adap->owner = THIS_MODULE;
-+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+	adap->algo = &rt_i2c_algo;
-+	adap->retries = 3;
-+	adap->dev.parent = &pdev->dev;
-+	i2c_set_adapdata(adap, i2c);
-+	adap->dev.of_node = pdev->dev.of_node;
-+	strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
-+	adap->quirks = &rt_i2c_quirks;
-+
-+	platform_set_drvdata(pdev, i2c);
-+
-+	restart = rt_i2c_init(i2c);
-+
-+	ret = i2c_add_adapter(adap);
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "failed to add adapter\n");
-+		clk_disable_unprepare(i2c->clk);
-+		return ret;
-+	}
-+
-+	dev_info(&pdev->dev, "clock %uKHz, re-start %ssupport\n",
-+			i2c->cur_clk/1000, restart ? "" : "not ");
-+
-+	return ret;
-+}
-+
-+static int rt_i2c_remove(struct platform_device *pdev)
-+{
-+	struct rt_i2c *i2c = platform_get_drvdata(pdev);
-+
-+	i2c_del_adapter(&i2c->adap);
-+	clk_disable_unprepare(i2c->clk);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver rt_i2c_driver = {
-+	.probe		= rt_i2c_probe,
-+	.remove		= rt_i2c_remove,
-+	.driver		= {
-+		.owner	= THIS_MODULE,
-+		.name	= "i2c-ralink",
-+		.of_match_table = i2c_rt_dt_ids,
-+	},
-+};
-+
-+static int __init i2c_rt_init (void)
-+{
-+	return platform_driver_register(&rt_i2c_driver);
-+}
-+subsys_initcall(i2c_rt_init);
-+
-+static void __exit i2c_rt_exit (void)
-+{
-+	platform_driver_unregister(&rt_i2c_driver);
-+}
-+module_exit(i2c_rt_exit);
-+
-+MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
-+MODULE_DESCRIPTION("Ralink I2c host driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:Ralink-I2C");
diff --git a/target/linux/ramips/patches-5.10/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-5.10/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
deleted file mode 100644
index 544b1d267e51..000000000000
--- a/target/linux/ramips/patches-5.10/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 23147af14531cbdada194b94120ef8774f46292d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 13 Nov 2014 19:08:40 +0100
-Subject: [PATCH 46/53] mmc: MIPS: ralink: add sdhci for mt7620a SoC
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mmc/host/Kconfig             |    2 +
- drivers/mmc/host/Makefile            |    1 +
- drivers/mmc/host/mtk-mmc/Kconfig     |   16 +
- drivers/mmc/host/mtk-mmc/Makefile    |   42 +
- drivers/mmc/host/mtk-mmc/board.h     |  137 ++
- drivers/mmc/host/mtk-mmc/dbg.c       |  347 ++++
- drivers/mmc/host/mtk-mmc/dbg.h       |  156 ++
- drivers/mmc/host/mtk-mmc/mt6575_sd.h | 1001 +++++++++++
- drivers/mmc/host/mtk-mmc/sd.c        | 3060 ++++++++++++++++++++++++++++++++++
- 9 files changed, 4762 insertions(+)
- create mode 100644 drivers/mmc/host/mtk-mmc/Kconfig
- create mode 100644 drivers/mmc/host/mtk-mmc/Makefile
- create mode 100644 drivers/mmc/host/mtk-mmc/board.h
- create mode 100644 drivers/mmc/host/mtk-mmc/dbg.c
- create mode 100644 drivers/mmc/host/mtk-mmc/dbg.h
- create mode 100644 drivers/mmc/host/mtk-mmc/mt6575_sd.h
- create mode 100644 drivers/mmc/host/mtk-mmc/sd.c
-
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -1102,3 +1102,5 @@ config MMC_OWL
- 
- config MMC_SDHCI_EXTERNAL_DMA
- 	bool
-+
-+source "drivers/mmc/host/mtk-mmc/Kconfig"
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -3,6 +3,7 @@
- # Makefile for MMC/SD host controller drivers
- #
- 
-+obj-$(CONFIG_MTK_MMC) 		+= mtk-mmc/
- obj-$(CONFIG_MMC_ARMMMCI) += armmmci.o
- armmmci-y := mmci.o
- armmmci-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o
diff --git a/target/linux/ramips/patches-5.10/835-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-5.10/835-asoc-add-mt7620-support.patch
deleted file mode 100644
index 680b67816812..000000000000
--- a/target/linux/ramips/patches-5.10/835-asoc-add-mt7620-support.patch
+++ /dev/null
@@ -1,1029 +0,0 @@
-From 7f29222b1731e8182ba94a331531dec18865a1e4 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:31:47 +0100
-Subject: [PATCH 48/53] asoc: add mt7620 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/of.c            |    2 +
- sound/soc/Kconfig                |    1 +
- sound/soc/Makefile               |    1 +
- sound/soc/ralink/Kconfig         |   15 ++
- sound/soc/ralink/Makefile        |   11 +
- sound/soc/ralink/mt7620-i2s.c    |  436 ++++++++++++++++++++++++++++++++++++++
- sound/soc/ralink/mt7620-wm8960.c |  233 ++++++++++++++++++++
- 7 files changed, 699 insertions(+)
- create mode 100644 sound/soc/ralink/Kconfig
- create mode 100644 sound/soc/ralink/Makefile
- create mode 100644 sound/soc/ralink/mt7620-i2s.c
- create mode 100644 sound/soc/ralink/mt7620-wm8960.c
-
---- a/sound/soc/Kconfig
-+++ b/sound/soc/Kconfig
-@@ -60,6 +60,7 @@ source "sound/soc/mxs/Kconfig"
- source "sound/soc/pxa/Kconfig"
- source "sound/soc/qcom/Kconfig"
- source "sound/soc/rockchip/Kconfig"
-+source "sound/soc/ralink/Kconfig"
- source "sound/soc/samsung/Kconfig"
- source "sound/soc/sh/Kconfig"
- source "sound/soc/sirf/Kconfig"
---- a/sound/soc/Makefile
-+++ b/sound/soc/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_SND_SOC)	+= kirkwood/
- obj-$(CONFIG_SND_SOC)	+= pxa/
- obj-$(CONFIG_SND_SOC)	+= qcom/
- obj-$(CONFIG_SND_SOC)	+= rockchip/
-+obj-$(CONFIG_SND_SOC)	+= ralink/
- obj-$(CONFIG_SND_SOC)	+= samsung/
- obj-$(CONFIG_SND_SOC)	+= sh/
- obj-$(CONFIG_SND_SOC)	+= sirf/
---- /dev/null
-+++ b/sound/soc/ralink/Kconfig
-@@ -0,0 +1,8 @@
-+config SND_RALINK_SOC_I2S
-+	depends on RALINK && SND_SOC && !SOC_RT288X
-+	select SND_SOC_GENERIC_DMAENGINE_PCM
-+	select REGMAP_MMIO
-+	tristate "SoC Audio (I2S protocol) for Ralink SoC"
-+	help
-+	  Say Y if you want to use I2S protocol and I2S codec on Ralink/MediaTek
-+	  based boards.
---- /dev/null
-+++ b/sound/soc/ralink/Makefile
-@@ -0,0 +1,6 @@
-+#
-+# Ralink/MediaTek Platform Support
-+#
-+snd-soc-ralink-i2s-objs := ralink-i2s.o
-+
-+obj-$(CONFIG_SND_RALINK_SOC_I2S) += snd-soc-ralink-i2s.o
---- /dev/null
-+++ b/sound/soc/ralink/ralink-i2s.c
-@@ -0,0 +1,966 @@
-+/*
-+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
-+ *  Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under  the terms of the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the License, or (at your
-+ *  option) any later version.
-+ *
-+ *  You should have received a copy of the GNU General Public License along
-+ *  with this program; if not, write to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/regmap.h>
-+#include <linux/reset.h>
-+#include <linux/debugfs.h>
-+#include <linux/of_device.h>
-+#include <sound/pcm_params.h>
-+#include <sound/dmaengine_pcm.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define DRV_NAME "ralink-i2s"
-+
-+#define I2S_REG_CFG0		0x00
-+#define I2S_REG_INT_STATUS	0x04
-+#define I2S_REG_INT_EN		0x08
-+#define I2S_REG_FF_STATUS	0x0c
-+#define I2S_REG_WREG		0x10
-+#define I2S_REG_RREG		0x14
-+#define I2S_REG_CFG1		0x18
-+#define I2S_REG_DIVCMP		0x20
-+#define I2S_REG_DIVINT		0x24
-+
-+/* I2S_REG_CFG0 */
-+#define I2S_REG_CFG0_EN		BIT(31)
-+#define I2S_REG_CFG0_DMA_EN	BIT(30)
-+#define I2S_REG_CFG0_BYTE_SWAP	BIT(28)
-+#define I2S_REG_CFG0_TX_EN	BIT(24)
-+#define I2S_REG_CFG0_RX_EN	BIT(20)
-+#define I2S_REG_CFG0_SLAVE	BIT(16)
-+#define I2S_REG_CFG0_RX_THRES	12
-+#define I2S_REG_CFG0_TX_THRES	4
-+#define I2S_REG_CFG0_THRES_MASK	(0xf << I2S_REG_CFG0_RX_THRES) | \
-+	(4 << I2S_REG_CFG0_TX_THRES)
-+#define I2S_REG_CFG0_DFT_THRES	(4 << I2S_REG_CFG0_RX_THRES) | \
-+	(4 << I2S_REG_CFG0_TX_THRES)
-+/* RT305x */
-+#define I2S_REG_CFG0_CLK_DIS	BIT(8)
-+#define I2S_REG_CFG0_TXCH_SWAP	BIT(3)
-+#define I2S_REG_CFG0_TXCH1_OFF	BIT(2)
-+#define I2S_REG_CFG0_TXCH0_OFF	BIT(1)
-+#define I2S_REG_CFG0_SLAVE_EN	BIT(0)
-+/* RT3883 */
-+#define I2S_REG_CFG0_RXCH_SWAP	BIT(11)
-+#define I2S_REG_CFG0_RXCH1_OFF	BIT(10)
-+#define I2S_REG_CFG0_RXCH0_OFF	BIT(9)
-+#define I2S_REG_CFG0_WS_INV	BIT(0)
-+/* MT7628 */
-+#define I2S_REG_CFG0_FMT_LE	BIT(29)
-+#define I2S_REG_CFG0_SYS_BE	BIT(28)
-+#define I2S_REG_CFG0_NORM_24	BIT(18)
-+#define I2S_REG_CFG0_DATA_24	BIT(17)
-+
-+/* I2S_REG_INT_STATUS */
-+#define I2S_REG_INT_RX_FAULT	BIT(7)
-+#define I2S_REG_INT_RX_OVRUN	BIT(6)
-+#define I2S_REG_INT_RX_UNRUN	BIT(5)
-+#define I2S_REG_INT_RX_THRES	BIT(4)
-+#define I2S_REG_INT_TX_FAULT	BIT(3)
-+#define I2S_REG_INT_TX_OVRUN	BIT(2)
-+#define I2S_REG_INT_TX_UNRUN	BIT(1)
-+#define I2S_REG_INT_TX_THRES	BIT(0)
-+#define I2S_REG_INT_TX_MASK	0xf
-+#define I2S_REG_INT_RX_MASK	0xf0
-+
-+/* I2S_REG_INT_STATUS */
-+#define I2S_RX_AVCNT(x)		((x >> 4) & 0xf)
-+#define I2S_TX_AVCNT(x)		(x & 0xf)
-+/* MT7628 */
-+#define MT7628_I2S_RX_AVCNT(x)	((x >> 8) & 0x1f)
-+#define MT7628_I2S_TX_AVCNT(x)	(x & 0x1f)
-+
-+/* I2S_REG_CFG1 */
-+#define I2S_REG_CFG1_LBK	BIT(31)
-+#define I2S_REG_CFG1_EXTLBK	BIT(30)
-+/* RT3883 */
-+#define I2S_REG_CFG1_LEFT_J	BIT(0)
-+#define I2S_REG_CFG1_RIGHT_J	BIT(1)
-+#define I2S_REG_CFG1_FMT_MASK	0x3
-+
-+/* I2S_REG_DIVCMP */
-+#define I2S_REG_DIVCMP_CLKEN	BIT(31)
-+#define I2S_REG_DIVCMP_DIVCOMP_MASK	0x1ff
-+
-+/* I2S_REG_DIVINT */
-+#define I2S_REG_DIVINT_MASK	0x3ff
-+
-+/* BCLK dividers */
-+#define RALINK_I2S_DIVCMP	0
-+#define RALINK_I2S_DIVINT	1
-+
-+/* FIFO */
-+#define RALINK_I2S_FIFO_SIZE	32
-+
-+/* feature flags */
-+#define RALINK_FLAGS_TXONLY	BIT(0)
-+#define RALINK_FLAGS_LEFT_J	BIT(1)
-+#define RALINK_FLAGS_RIGHT_J	BIT(2)
-+#define RALINK_FLAGS_ENDIAN	BIT(3)
-+#define RALINK_FLAGS_24BIT	BIT(4)
-+
-+#define RALINK_I2S_INT_EN	0
-+
-+struct ralink_i2s_stats {
-+	u32 dmafault;
-+	u32 overrun;
-+	u32 underrun;
-+	u32 belowthres;
-+};
-+
-+struct ralink_i2s {
-+	struct device *dev;
-+	void __iomem *regs;
-+	struct clk *clk;
-+	struct regmap *regmap;
-+	u32 flags;
-+	unsigned int fmt;
-+	u16 txdma_req;
-+	u16 rxdma_req;
-+
-+	struct snd_dmaengine_dai_dma_data playback_dma_data;
-+	struct snd_dmaengine_dai_dma_data capture_dma_data;
-+
-+	struct dentry *dbg_dir;
-+        struct dentry *dbg_stats;
-+	struct ralink_i2s_stats txstats;
-+	struct ralink_i2s_stats rxstats;
-+};
-+
-+static void ralink_i2s_dump_regs(struct ralink_i2s *i2s)
-+{
-+	u32 buf[10];
-+	int ret;
-+
-+	ret = regmap_bulk_read(i2s->regmap, I2S_REG_CFG0,
-+			buf, ARRAY_SIZE(buf));
-+
-+	dev_dbg(i2s->dev, "CFG0: %08x, INTSTAT: %08x, INTEN: %08x, " \
-+			"FFSTAT: %08x, WREG: %08x, RREG: %08x, " \
-+			"CFG1: %08x, DIVCMP: %08x, DIVINT: %08x\n",
-+			buf[0], buf[1], buf[2], buf[3], buf[4],
-+			buf[5], buf[6], buf[8], buf[9]);
-+}
-+
-+static int ralink_i2s_set_sysclk(struct snd_soc_dai *dai,
-+                              int clk_id, unsigned int freq, int dir)
-+{
-+	return 0;
-+}
-+
-+static int ralink_i2s_set_sys_bclk(struct snd_soc_dai *dai, int width, int rate)
-+{
-+	struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+	unsigned long clk = clk_get_rate(i2s->clk);
-+	int div;
-+	uint32_t data;
-+
-+	/* disable clock at slave mode */
-+	if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
-+			SND_SOC_DAIFMT_CBM_CFM) {
-+		regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+				I2S_REG_CFG0_CLK_DIS,
-+				I2S_REG_CFG0_CLK_DIS);
-+		return 0;
-+	}
-+
-+	/* FREQOUT = FREQIN / (I2S_CLK_DIV + 1) */
-+	div = (clk / rate ) - 1;
-+
-+	data = rt_sysc_r32(0x30);
-+	data &= (0xff << 8);
-+	data |= (0x1 << 15) | (div << 8);
-+	rt_sysc_w32(data, 0x30);
-+
-+	/* enable clock */
-+	regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_CLK_DIS, 0);
-+
-+	dev_dbg(i2s->dev, "clk: %lu, rate: %u, div: %d\n",
-+			clk, rate, div);
-+
-+	return 0;
-+}
-+
-+static int ralink_i2s_set_bclk(struct snd_soc_dai *dai, int width, int rate)
-+{
-+	struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+	unsigned long clk = clk_get_rate(i2s->clk);
-+	int divint, divcomp;
-+
-+	/* disable clock at slave mode */
-+	if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
-+			SND_SOC_DAIFMT_CBM_CFM) {
-+		regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP,
-+				I2S_REG_DIVCMP_CLKEN, 0);
-+		return 0;
-+	}
-+
-+	/* FREQOUT = FREQIN * (1/2) * (1/(DIVINT + DIVCOMP/512)) */
-+	clk = clk / (2 * 2 * width);
-+	divint = clk / rate;
-+	divcomp = ((clk % rate) * 512) / rate;
-+
-+	if ((divint > I2S_REG_DIVINT_MASK) ||
-+			(divcomp > I2S_REG_DIVCMP_DIVCOMP_MASK))
-+		return -EINVAL;
-+
-+	regmap_update_bits(i2s->regmap, I2S_REG_DIVINT,
-+			I2S_REG_DIVINT_MASK, divint);
-+	regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP,
-+			I2S_REG_DIVCMP_DIVCOMP_MASK, divcomp);
-+
-+	/* enable clock */
-+	regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, I2S_REG_DIVCMP_CLKEN,
-+			I2S_REG_DIVCMP_CLKEN);
-+
-+	dev_dbg(i2s->dev, "clk: %lu, rate: %u, int: %d, comp: %d\n",
-+			clk_get_rate(i2s->clk), rate, divint, divcomp);
-+
-+	return 0;
-+}
-+
-+static int ralink_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-+{
-+	struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+	unsigned int cfg0 = 0, cfg1 = 0;
-+
-+	/* set master/slave audio interface */
-+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-+	case SND_SOC_DAIFMT_CBM_CFM:
-+		if (i2s->flags & RALINK_FLAGS_TXONLY)
-+			cfg0 |= I2S_REG_CFG0_SLAVE_EN;
-+		else
-+			cfg0 |= I2S_REG_CFG0_SLAVE;
-+		break;
-+	case SND_SOC_DAIFMT_CBS_CFS:
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	/* interface format */
-+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-+	case SND_SOC_DAIFMT_I2S:
-+		break;
-+	case SND_SOC_DAIFMT_RIGHT_J:
-+		if (i2s->flags & RALINK_FLAGS_RIGHT_J) {
-+			cfg1 |= I2S_REG_CFG1_RIGHT_J;
-+			break;
-+		}
-+		return -EINVAL;
-+	case SND_SOC_DAIFMT_LEFT_J:
-+		if (i2s->flags & RALINK_FLAGS_LEFT_J) {
-+			cfg1 |= I2S_REG_CFG1_LEFT_J;
-+			break;
-+		}
-+		return -EINVAL;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	/* clock inversion */
-+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-+	case SND_SOC_DAIFMT_NB_NF:
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	if (i2s->flags & RALINK_FLAGS_TXONLY) {
-+		regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+				I2S_REG_CFG0_SLAVE_EN, cfg0);
-+	} else {
-+		regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+				I2S_REG_CFG0_SLAVE, cfg0);
-+	}
-+	regmap_update_bits(i2s->regmap, I2S_REG_CFG1,
-+			I2S_REG_CFG1_FMT_MASK, cfg1);
-+	i2s->fmt = fmt;
-+
-+	return 0;
-+}
-+
-+static int ralink_i2s_startup(struct snd_pcm_substream *substream,
-+		struct snd_soc_dai *dai)
-+{
-+	struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+	if (snd_soc_dai_active(dai))
-+		return 0;
-+
-+	/* setup status interrupt */
-+#if (RALINK_I2S_INT_EN)
-+	regmap_write(i2s->regmap, I2S_REG_INT_EN, 0xff);
-+#else
-+	regmap_write(i2s->regmap, I2S_REG_INT_EN, 0x0);
-+#endif
-+
-+	/* enable */
-+	regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+			I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN |
-+			I2S_REG_CFG0_THRES_MASK,
-+			I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN |
-+			I2S_REG_CFG0_DFT_THRES);
-+
-+	return 0;
-+}
-+
-+static void ralink_i2s_shutdown(struct snd_pcm_substream *substream,
-+		struct snd_soc_dai *dai)
-+{
-+	struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+	/* If both streams are stopped, disable module and clock */
-+	if (snd_soc_dai_active(dai))
-+		return;
-+
-+	/*
-+	 * datasheet mention when disable all control regs are cleared
-+	 * to initial values. need reinit at startup.
-+	 */
-+	regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_EN, 0);
-+}
-+
-+static int ralink_i2s_hw_params(struct snd_pcm_substream *substream,
-+		struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
-+{
-+	struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+	int width;
-+	int ret;
-+
-+	width = params_width(params);
-+	switch (width) {
-+	case 16:
-+		if (i2s->flags & RALINK_FLAGS_24BIT)
-+			regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+					I2S_REG_CFG0_DATA_24, 0);
-+		break;
-+	case 24:
-+		if (i2s->flags & RALINK_FLAGS_24BIT) {
-+			regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+					I2S_REG_CFG0_DATA_24,
-+					I2S_REG_CFG0_DATA_24);
-+			break;
-+		}
-+		return -EINVAL;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	switch (params_channels(params)) {
-+	case 2:
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	if (i2s->flags & RALINK_FLAGS_ENDIAN) {
-+		/* system endian */
-+#ifdef SNDRV_LITTLE_ENDIAN
-+		regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+				I2S_REG_CFG0_SYS_BE, 0);
-+#else
-+		regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+				I2S_REG_CFG0_SYS_BE,
-+				I2S_REG_CFG0_SYS_BE);
-+#endif
-+
-+		/* data endian */
-+		switch (params_format(params)) {
-+		case SNDRV_PCM_FORMAT_S16_LE:
-+		case SNDRV_PCM_FORMAT_S24_LE:
-+			regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+					I2S_REG_CFG0_FMT_LE,
-+					I2S_REG_CFG0_FMT_LE);
-+			break;
-+		case SNDRV_PCM_FORMAT_S16_BE:
-+		case SNDRV_PCM_FORMAT_S24_BE:
-+			regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
-+					I2S_REG_CFG0_FMT_LE, 0);
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+	}
-+
-+	/* setup bclk rate */
-+	if (i2s->flags & RALINK_FLAGS_TXONLY)
-+		ret = ralink_i2s_set_sys_bclk(dai, width, params_rate(params));
-+	else
-+		ret = ralink_i2s_set_bclk(dai, width, params_rate(params));
-+
-+	return ret;
-+}
-+
-+static int ralink_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
-+		struct snd_soc_dai *dai)
-+{
-+	struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+	unsigned int mask, val;
-+
-+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+		mask = I2S_REG_CFG0_TX_EN;
-+	else
-+		mask = I2S_REG_CFG0_RX_EN;
-+
-+	switch (cmd) {
-+	case SNDRV_PCM_TRIGGER_START:
-+	case SNDRV_PCM_TRIGGER_RESUME:
-+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-+		val = mask;
-+		break;
-+	case SNDRV_PCM_TRIGGER_STOP:
-+	case SNDRV_PCM_TRIGGER_SUSPEND:
-+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-+		val = 0;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	regmap_update_bits(i2s->regmap, I2S_REG_CFG0, mask, val);
-+
-+	return 0;
-+}
-+
-+static void ralink_i2s_init_dma_data(struct ralink_i2s *i2s,
-+		struct resource *res)
-+{
-+	struct snd_dmaengine_dai_dma_data *dma_data;
-+
-+	/* Playback */
-+	dma_data = &i2s->playback_dma_data;
-+	dma_data->addr = res->start + I2S_REG_WREG;
-+	dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+	dma_data->maxburst = 1;
-+	dma_data->slave_id = i2s->txdma_req;
-+
-+	if (i2s->flags & RALINK_FLAGS_TXONLY)
-+		return;
-+
-+	/* Capture */
-+	dma_data = &i2s->capture_dma_data;
-+	dma_data->addr = res->start + I2S_REG_RREG;
-+	dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+	dma_data->maxburst = 1;
-+	dma_data->slave_id = i2s->rxdma_req;
-+}
-+
-+static int ralink_i2s_dai_probe(struct snd_soc_dai *dai)
-+{
-+	struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+	snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data,
-+			&i2s->capture_dma_data);
-+
-+	return 0;
-+}
-+
-+static int ralink_i2s_dai_remove(struct snd_soc_dai *dai)
-+{
-+	return 0;
-+}
-+
-+static const struct snd_soc_dai_ops ralink_i2s_dai_ops = {
-+	.set_sysclk = ralink_i2s_set_sysclk,
-+	.set_fmt = ralink_i2s_set_fmt,
-+	.startup = ralink_i2s_startup,
-+	.shutdown = ralink_i2s_shutdown,
-+	.hw_params = ralink_i2s_hw_params,
-+	.trigger = ralink_i2s_trigger,
-+};
-+
-+static struct snd_soc_dai_driver ralink_i2s_dai = {
-+	.name = DRV_NAME,
-+	.probe = ralink_i2s_dai_probe,
-+	.remove = ralink_i2s_dai_remove,
-+	.ops = &ralink_i2s_dai_ops,
-+	.capture = {
-+		.stream_name = "I2S Capture",
-+		.channels_min = 2,
-+		.channels_max = 2,
-+		.rate_min = 5512,
-+		.rate_max = 192000,
-+		.rates = SNDRV_PCM_RATE_CONTINUOUS,
-+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
-+	},
-+	.playback = {
-+		.stream_name = "I2S Playback",
-+		.channels_min = 2,
-+		.channels_max = 2,
-+		.rate_min = 5512,
-+		.rate_max = 192000,
-+		.rates = SNDRV_PCM_RATE_CONTINUOUS,
-+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
-+	},
-+	.symmetric_rates = 1,
-+};
-+
-+static struct snd_pcm_hardware ralink_pcm_hardware = {
-+	.info = SNDRV_PCM_INFO_MMAP |
-+		SNDRV_PCM_INFO_MMAP_VALID |
-+		SNDRV_PCM_INFO_INTERLEAVED |
-+		SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+	.formats = SNDRV_PCM_FMTBIT_S16_LE,
-+	.channels_min		= 2,
-+	.channels_max		= 2,
-+	.period_bytes_min	= PAGE_SIZE,
-+	.period_bytes_max	= PAGE_SIZE * 2,
-+	.periods_min		= 2,
-+	.periods_max		= 128,
-+	.buffer_bytes_max	= 128 * 1024,
-+	.fifo_size		= RALINK_I2S_FIFO_SIZE,
-+};
-+
-+static const struct snd_dmaengine_pcm_config ralink_dmaengine_pcm_config = {
-+	.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
-+	.pcm_hardware = &ralink_pcm_hardware,
-+	.prealloc_buffer_size = 256 * PAGE_SIZE,
-+};
-+
-+static const struct snd_soc_component_driver ralink_i2s_component = {
-+	.name = DRV_NAME,
-+};
-+
-+static bool ralink_i2s_readable_reg(struct device *dev, unsigned int reg)
-+{
-+	return true;
-+}
-+
-+static bool ralink_i2s_volatile_reg(struct device *dev, unsigned int reg)
-+{
-+	switch (reg) {
-+	case I2S_REG_INT_STATUS:
-+	case I2S_REG_FF_STATUS:
-+		return true;
-+	}
-+	return false;
-+}
-+
-+static bool ralink_i2s_writeable_reg(struct device *dev, unsigned int reg)
-+{
-+	switch (reg) {
-+	case I2S_REG_FF_STATUS:
-+	case I2S_REG_RREG:
-+		return false;
-+	}
-+	return true;
-+}
-+
-+static const struct regmap_config ralink_i2s_regmap_config = {
-+	.reg_bits = 32,
-+	.reg_stride = 4,
-+	.val_bits = 32,
-+	.writeable_reg = ralink_i2s_writeable_reg,
-+	.readable_reg = ralink_i2s_readable_reg,
-+	.volatile_reg = ralink_i2s_volatile_reg,
-+	.max_register = I2S_REG_DIVINT,
-+};
-+
-+#if (RALINK_I2S_INT_EN)
-+static irqreturn_t ralink_i2s_irq(int irq, void *devid)
-+{
-+	struct ralink_i2s *i2s = devid;
-+	u32 status;
-+
-+	regmap_read(i2s->regmap, I2S_REG_INT_STATUS, &status);
-+	if (unlikely(!status))
-+		return IRQ_NONE;
-+
-+	/* tx stats */
-+	if (status & I2S_REG_INT_TX_MASK) {
-+		if (status & I2S_REG_INT_TX_THRES)
-+			i2s->txstats.belowthres++;
-+		if (status & I2S_REG_INT_TX_UNRUN)
-+			i2s->txstats.underrun++;
-+		if (status & I2S_REG_INT_TX_OVRUN)
-+			i2s->txstats.overrun++;
-+		if (status & I2S_REG_INT_TX_FAULT)
-+			i2s->txstats.dmafault++;
-+	}
-+
-+	/* rx stats */
-+	if (status & I2S_REG_INT_RX_MASK) {
-+		if (status & I2S_REG_INT_RX_THRES)
-+			i2s->rxstats.belowthres++;
-+		if (status & I2S_REG_INT_RX_UNRUN)
-+			i2s->rxstats.underrun++;
-+		if (status & I2S_REG_INT_RX_OVRUN)
-+			i2s->rxstats.overrun++;
-+		if (status & I2S_REG_INT_RX_FAULT)
-+			i2s->rxstats.dmafault++;
-+	}
-+
-+	/* clean status bits */
-+	regmap_write(i2s->regmap, I2S_REG_INT_STATUS, status);
-+
-+	return IRQ_HANDLED;
-+}
-+#endif
-+
-+#if IS_ENABLED(CONFIG_DEBUG_FS)
-+static int ralink_i2s_stats_show(struct seq_file *s, void *unused)
-+{
-+        struct ralink_i2s *i2s = s->private;
-+
-+	seq_printf(s, "tx stats\n");
-+	seq_printf(s, "\tbelow threshold\t%u\n", i2s->txstats.belowthres);
-+	seq_printf(s, "\tunder run\t%u\n", i2s->txstats.underrun);
-+	seq_printf(s, "\tover run\t%u\n", i2s->txstats.overrun);
-+	seq_printf(s, "\tdma fault\t%u\n", i2s->txstats.dmafault);
-+
-+	seq_printf(s, "rx stats\n");
-+	seq_printf(s, "\tbelow threshold\t%u\n", i2s->rxstats.belowthres);
-+	seq_printf(s, "\tunder run\t%u\n", i2s->rxstats.underrun);
-+	seq_printf(s, "\tover run\t%u\n", i2s->rxstats.overrun);
-+	seq_printf(s, "\tdma fault\t%u\n", i2s->rxstats.dmafault);
-+
-+	ralink_i2s_dump_regs(i2s);
-+
-+	return 0;
-+}
-+
-+static int ralink_i2s_stats_open(struct inode *inode, struct file *file)
-+{
-+        return single_open(file, ralink_i2s_stats_show, inode->i_private);
-+}
-+
-+static const struct file_operations ralink_i2s_stats_ops = {
-+        .open = ralink_i2s_stats_open,
-+        .read = seq_read,
-+        .llseek = seq_lseek,
-+        .release = single_release,
-+};
-+
-+static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s)
-+{
-+        i2s->dbg_dir = debugfs_create_dir(dev_name(i2s->dev), NULL);
-+        if (!i2s->dbg_dir)
-+                return -ENOMEM;
-+
-+        i2s->dbg_stats = debugfs_create_file("stats", S_IRUGO,
-+                        i2s->dbg_dir, i2s, &ralink_i2s_stats_ops);
-+        if (!i2s->dbg_stats) {
-+                debugfs_remove(i2s->dbg_dir);
-+                return -ENOMEM;
-+        }
-+
-+        return 0;
-+}
-+
-+static inline void ralink_i2s_debugfs_remove(struct ralink_i2s *i2s)
-+{
-+	debugfs_remove(i2s->dbg_stats);
-+	debugfs_remove(i2s->dbg_dir);
-+}
-+#else
-+static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s)
-+{
-+	return 0;
-+}
-+
-+static inline void ralink_i2s_debugfs_remove(struct ralink_i2s *i2s)
-+{
-+}
-+#endif
-+
-+/*
-+ * TODO: these refclk setup functions should use
-+ * clock framework instead. hardcode it now.
-+ */
-+static void rt3350_refclk_setup(void)
-+{
-+	uint32_t data;
-+
-+	/* set refclk output 12Mhz clock */
-+	data = rt_sysc_r32(0x2c);
-+	data |= (0x1 << 8);
-+	rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void rt3883_refclk_setup(void)
-+{
-+	uint32_t data;
-+
-+	/* set refclk output 12Mhz clock */
-+	data = rt_sysc_r32(0x2c);
-+	data &= ~(0x3 << 13);
-+	data |= (0x1 << 13);
-+	rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void rt3552_refclk_setup(void)
-+{
-+	uint32_t data;
-+
-+	/* set refclk output 12Mhz clock */
-+	data = rt_sysc_r32(0x2c);
-+	data &= ~(0xf << 8);
-+	data |= (0x3 << 8);
-+	rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void mt7620_refclk_setup(void)
-+{
-+	uint32_t data;
-+
-+	/* set refclk output 12Mhz clock */
-+	data = rt_sysc_r32(0x2c);
-+	data &= ~(0x7 << 9);
-+	data |= 0x1 << 9;
-+	rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void mt7621_refclk_setup(void)
-+{
-+	uint32_t data;
-+
-+	/* set refclk output 12Mhz clock */
-+	data = rt_sysc_r32(0x2c);
-+	data &= ~(0x1f << 18);
-+	data |= (0x19 << 18);
-+	data &= ~(0x1f << 12);
-+	data |= (0x1 << 12);
-+	data &= ~(0x7 << 9);
-+	data |= (0x5 << 9);
-+	rt_sysc_w32(data, 0x2c);
-+}
-+
-+static void mt7628_refclk_setup(void)
-+{
-+	uint32_t data;
-+
-+	/* set i2s and refclk digital pad */
-+	data = rt_sysc_r32(0x3c);
-+	data |= 0x1f;
-+	rt_sysc_w32(data, 0x3c);
-+
-+	/* Adjust REFCLK0's driving strength */
-+	data = rt_sysc_r32(0x1354);
-+	data &= ~(0x1 << 5);
-+	rt_sysc_w32(data, 0x1354);
-+	data = rt_sysc_r32(0x1364);
-+	data |= ~(0x1 << 5);
-+	rt_sysc_w32(data, 0x1364);
-+
-+	/* set refclk output 12Mhz clock */
-+	data = rt_sysc_r32(0x2c);
-+	data &= ~(0x7 << 9);
-+	data |= 0x1 << 9;
-+	rt_sysc_w32(data, 0x2c);
-+}
-+
-+struct rt_i2s_data {
-+	u32 flags;
-+	void (*refclk_setup)(void);
-+};
-+
-+struct rt_i2s_data rt3050_i2s_data = { .flags = RALINK_FLAGS_TXONLY };
-+struct rt_i2s_data rt3350_i2s_data = { .flags = RALINK_FLAGS_TXONLY,
-+	.refclk_setup = rt3350_refclk_setup };
-+struct rt_i2s_data rt3883_i2s_data = {
-+	.flags = (RALINK_FLAGS_LEFT_J | RALINK_FLAGS_RIGHT_J),
-+	.refclk_setup = rt3883_refclk_setup };
-+struct rt_i2s_data rt3352_i2s_data = { .refclk_setup = rt3552_refclk_setup};
-+struct rt_i2s_data mt7620_i2s_data = { .refclk_setup = mt7620_refclk_setup};
-+struct rt_i2s_data mt7621_i2s_data = { .refclk_setup = mt7621_refclk_setup};
-+struct rt_i2s_data mt7628_i2s_data = {
-+	.flags = (RALINK_FLAGS_ENDIAN | RALINK_FLAGS_24BIT |
-+			RALINK_FLAGS_LEFT_J),
-+	.refclk_setup = mt7628_refclk_setup};
-+
-+static const struct of_device_id ralink_i2s_match_table[] = {
-+	{ .compatible = "ralink,rt3050-i2s",
-+		.data = (void *)&rt3050_i2s_data },
-+	{ .compatible = "ralink,rt3350-i2s",
-+		.data = (void *)&rt3350_i2s_data },
-+	{ .compatible = "ralink,rt3883-i2s",
-+		.data = (void *)&rt3883_i2s_data },
-+	{ .compatible = "ralink,rt3352-i2s",
-+		.data = (void *)&rt3352_i2s_data },
-+	{ .compatible = "mediatek,mt7620-i2s",
-+		.data = (void *)&mt7620_i2s_data },
-+	{ .compatible = "mediatek,mt7621-i2s",
-+		.data = (void *)&mt7621_i2s_data },
-+	{ .compatible = "mediatek,mt7628-i2s",
-+		.data = (void *)&mt7628_i2s_data },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_i2s_match_table);
-+
-+static int ralink_i2s_probe(struct platform_device *pdev)
-+{
-+	const struct of_device_id *match;
-+	struct device_node *np = pdev->dev.of_node;
-+	struct ralink_i2s *i2s;
-+	struct resource *res;
-+	int irq, ret;
-+	u32 dma_req;
-+	struct rt_i2s_data *data;
-+
-+	i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL);
-+	if (!i2s)
-+		return -ENOMEM;
-+
-+	platform_set_drvdata(pdev, i2s);
-+	i2s->dev = &pdev->dev;
-+
-+	match = of_match_device(ralink_i2s_match_table, &pdev->dev);
-+	if (!match)
-+		return -EINVAL;
-+	data = (struct rt_i2s_data *)match->data;
-+	i2s->flags = data->flags;
-+	/* setup out 12Mhz refclk to codec as mclk */
-+	if (data->refclk_setup)
-+		data->refclk_setup();
-+
-+	if (of_property_read_u32(np, "txdma-req", &dma_req)) {
-+		dev_err(&pdev->dev, "no txdma-req define\n");
-+		return -EINVAL;
-+	}
-+	i2s->txdma_req = (u16)dma_req;
-+	if (!(i2s->flags & RALINK_FLAGS_TXONLY)) {
-+		if (of_property_read_u32(np, "rxdma-req", &dma_req)) {
-+			dev_err(&pdev->dev, "no rxdma-req define\n");
-+			return -EINVAL;
-+		}
-+		i2s->rxdma_req = (u16)dma_req;
-+	}
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	i2s->regs = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(i2s->regs))
-+		return PTR_ERR(i2s->regs);
-+
-+	i2s->regmap = devm_regmap_init_mmio(&pdev->dev, i2s->regs,
-+			&ralink_i2s_regmap_config);
-+	if (IS_ERR(i2s->regmap)) {
-+		dev_err(&pdev->dev, "regmap init failed\n");
-+		return PTR_ERR(i2s->regmap);
-+	}
-+
-+        irq = platform_get_irq(pdev, 0);
-+        if (irq < 0) {
-+                dev_err(&pdev->dev, "failed to get irq\n");
-+                return -EINVAL;
-+        }
-+
-+#if (RALINK_I2S_INT_EN)
-+	ret = devm_request_irq(&pdev->dev, irq, ralink_i2s_irq,
-+			0, dev_name(&pdev->dev), i2s);
-+	if (ret) {
-+		dev_err(&pdev->dev, "failed to request irq\n");
-+		return ret;
-+	}
-+#endif
-+
-+	i2s->clk = devm_clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(i2s->clk)) {
-+		dev_err(&pdev->dev, "no clock defined\n");
-+		return PTR_ERR(i2s->clk);
-+	}
-+
-+	ret = clk_prepare_enable(i2s->clk);
-+	if (ret)
-+		return ret;
-+
-+	ralink_i2s_init_dma_data(i2s, res);
-+
-+	device_reset(&pdev->dev);
-+
-+	ret = ralink_i2s_debugfs_create(i2s);
-+	if (ret) {
-+		dev_err(&pdev->dev, "create debugfs failed\n");
-+		goto err_clk_disable;
-+	}
-+
-+	/* enable 24bits support */
-+	if (i2s->flags & RALINK_FLAGS_24BIT) {
-+		ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S24_LE;
-+		ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S24_LE;
-+	}
-+
-+	/* enable big endian support */
-+	if (i2s->flags & RALINK_FLAGS_ENDIAN) {
-+		ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S16_BE;
-+		ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S16_BE;
-+		ralink_pcm_hardware.formats |= SNDRV_PCM_FMTBIT_S16_BE;
-+		if (i2s->flags & RALINK_FLAGS_24BIT) {
-+			ralink_i2s_dai.capture.formats |=
-+				SNDRV_PCM_FMTBIT_S24_BE;
-+			ralink_i2s_dai.playback.formats |=
-+				SNDRV_PCM_FMTBIT_S24_BE;
-+			ralink_pcm_hardware.formats |=
-+				SNDRV_PCM_FMTBIT_S24_BE;
-+		}
-+	}
-+
-+	/* disable capture support */
-+	if (i2s->flags & RALINK_FLAGS_TXONLY)
-+		memset(&ralink_i2s_dai.capture, sizeof(ralink_i2s_dai.capture),
-+				0);
-+
-+	ret = devm_snd_soc_register_component(&pdev->dev, &ralink_i2s_component,
-+			&ralink_i2s_dai, 1);
-+	if (ret)
-+		goto err_debugfs;
-+
-+	ret = devm_snd_dmaengine_pcm_register(&pdev->dev,
-+			&ralink_dmaengine_pcm_config,
-+			SND_DMAENGINE_PCM_FLAG_COMPAT);
-+	if (ret)
-+		goto err_debugfs;
-+
-+	dev_info(i2s->dev, "mclk %luMHz\n", clk_get_rate(i2s->clk) / 1000000);
-+
-+	return 0;
-+
-+err_debugfs:
-+	ralink_i2s_debugfs_remove(i2s);
-+
-+err_clk_disable:
-+	clk_disable_unprepare(i2s->clk);
-+
-+	return ret;
-+}
-+
-+static int ralink_i2s_remove(struct platform_device *pdev)
-+{
-+	struct ralink_i2s *i2s = platform_get_drvdata(pdev);
-+
-+	ralink_i2s_debugfs_remove(i2s);
-+	clk_disable_unprepare(i2s->clk);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver ralink_i2s_driver = {
-+	.probe = ralink_i2s_probe,
-+	.remove = ralink_i2s_remove,
-+	.driver = {
-+		.name = DRV_NAME,
-+		.of_match_table = ralink_i2s_match_table,
-+	},
-+};
-+module_platform_driver(ralink_i2s_driver);
-+
-+MODULE_AUTHOR("Lars-Peter Clausen, <lars@metafoo.de>");
-+MODULE_DESCRIPTION("Ralink/MediaTek I2S driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch
deleted file mode 100644
index 37f0504b55ab..000000000000
--- a/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From a7eb46e0ea4a11e4dfb56ab129bf816d1059a6c5 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:31:08 +0100
-Subject: [PATCH 51/53] serial: add ugly custom baud rate hack
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/tty/serial/serial_core.c |    3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -417,6 +417,9 @@ uart_get_baud_rate(struct uart_port *por
- 		break;
- 	}
- 
-+	if (tty_termios_baud_rate(termios) == 2500000)
-+		return 250000;
-+
- 	for (try = 0; try < 2; try++) {
- 		baud = tty_termios_baud_rate(termios);
- 
diff --git a/target/linux/ramips/patches-5.10/845-pwm-add-mediatek-support.patch b/target/linux/ramips/patches-5.10/845-pwm-add-mediatek-support.patch
deleted file mode 100644
index 794e3360fbb7..000000000000
--- a/target/linux/ramips/patches-5.10/845-pwm-add-mediatek-support.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From fc8f96309c21c1bc3276427309cd7d361347d66e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:16:50 +0100
-Subject: [PATCH 52/53] pwm: add mediatek support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pwm/Kconfig        |    9 +++
- drivers/pwm/Makefile       |    1 +
- drivers/pwm/pwm-mediatek.c |  173 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 183 insertions(+)
- create mode 100644 drivers/pwm/pwm-mediatek.c
-
---- a/drivers/pwm/Kconfig
-+++ b/drivers/pwm/Kconfig
-@@ -339,6 +339,15 @@ config PWM_MEDIATEK
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called pwm-mediatek.
- 
-+config PWM_MEDIATEK_RAMIPS
-+	tristate "Mediatek PWM support"
-+	depends on RALINK && OF
-+	help
-+	  Generic PWM framework driver for Mediatek ARM SoC.
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called pwm-mxs.
-+
- config PWM_MXS
- 	tristate "Freescale MXS PWM support"
- 	depends on OF
---- a/drivers/pwm/Makefile
-+++ b/drivers/pwm/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_PWM_LPSS_PCI)	+= pwm-lpss-p
- obj-$(CONFIG_PWM_LPSS_PLATFORM)	+= pwm-lpss-platform.o
- obj-$(CONFIG_PWM_MESON)		+= pwm-meson.o
- obj-$(CONFIG_PWM_MEDIATEK)	+= pwm-mediatek.o
-+obj-$(CONFIG_PWM_MEDIATEK_RAMIPS)	+= pwm-mediatek-ramips.o
- obj-$(CONFIG_PWM_MTK_DISP)	+= pwm-mtk-disp.o
- obj-$(CONFIG_PWM_MXS)		+= pwm-mxs.o
- obj-$(CONFIG_PWM_OMAP_DMTIMER)	+= pwm-omap-dmtimer.o
---- /dev/null
-+++ b/drivers/pwm/pwm-mediatek-ramips.c
-@@ -0,0 +1,173 @@
-+/*
-+ * Mediatek Pulse Width Modulator driver
-+ *
-+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/pwm.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+
-+#define NUM_PWM		4
-+
-+/* PWM registers and bits definitions */
-+#define PWMCON			0x00
-+#define PWMHDUR			0x04
-+#define PWMLDUR			0x08
-+#define PWMGDUR			0x0c
-+#define PWMWAVENUM		0x28
-+#define PWMDWIDTH		0x2c
-+#define PWMTHRES		0x30
-+
-+/**
-+ * struct mtk_pwm_chip - struct representing pwm chip
-+ *
-+ * @mmio_base: base address of pwm chip
-+ * @chip: linux pwm chip representation
-+ */
-+struct mtk_pwm_chip {
-+	void __iomem *mmio_base;
-+	struct pwm_chip chip;
-+};
-+
-+static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
-+{
-+	return container_of(chip, struct mtk_pwm_chip, chip);
-+}
-+
-+static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
-+				  unsigned long offset)
-+{
-+	return ioread32(chip->mmio_base + 0x10 + (num * 0x40) + offset);
-+}
-+
-+static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
-+				    unsigned int num, unsigned long offset,
-+				    unsigned long val)
-+{
-+	iowrite32(val, chip->mmio_base + 0x10 + (num * 0x40) + offset);
-+}
-+
-+static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-+			    int duty_ns, int period_ns)
-+{
-+	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
-+	u32 resolution = 100 / 4;
-+	u32 clkdiv = 0;
-+
-+	while (period_ns / resolution  > 8191) {
-+		clkdiv++;
-+		resolution *= 2;
-+	}
-+
-+	if (clkdiv > 7)
-+		return -1;
-+
-+	mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv);
-+	mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
-+	mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
-+	return 0;
-+}
-+
-+static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-+{
-+	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
-+	u32 val;
-+
-+	val = ioread32(pc->mmio_base);
-+	val |= BIT(pwm->hwpwm);
-+	iowrite32(val, pc->mmio_base);
-+
-+	return 0;
-+}
-+
-+static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-+{
-+	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
-+	u32 val;
-+
-+	val = ioread32(pc->mmio_base);
-+	val &= ~BIT(pwm->hwpwm);
-+	iowrite32(val, pc->mmio_base);
-+}
-+
-+static const struct pwm_ops mtk_pwm_ops = {
-+	.config = mtk_pwm_config,
-+	.enable = mtk_pwm_enable,
-+	.disable = mtk_pwm_disable,
-+	.owner = THIS_MODULE,
-+};
-+
-+static int mtk_pwm_probe(struct platform_device *pdev)
-+{
-+	struct mtk_pwm_chip *pc;
-+	struct resource *r;
-+	int ret;
-+
-+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
-+	if (!pc)
-+		return -ENOMEM;
-+
-+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
-+	if (IS_ERR(pc->mmio_base))
-+		return PTR_ERR(pc->mmio_base);
-+
-+	platform_set_drvdata(pdev, pc);
-+
-+	pc->chip.dev = &pdev->dev;
-+	pc->chip.ops = &mtk_pwm_ops;
-+	pc->chip.base = -1;
-+	pc->chip.npwm = NUM_PWM;
-+
-+	ret = pwmchip_add(&pc->chip);
-+	if (ret < 0)
-+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
-+
-+	return ret;
-+}
-+
-+static int mtk_pwm_remove(struct platform_device *pdev)
-+{
-+	struct mtk_pwm_chip *pc = platform_get_drvdata(pdev);
-+	int i;
-+
-+	for (i = 0; i < NUM_PWM; i++)
-+		pwm_disable(&pc->chip.pwms[i]);
-+
-+	return pwmchip_remove(&pc->chip);
-+}
-+
-+static const struct of_device_id mtk_pwm_of_match[] = {
-+	{ .compatible = "mediatek,mt7628-pwm" },
-+	{ }
-+};
-+
-+MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
-+
-+static struct platform_driver mtk_pwm_driver = {
-+	.driver = {
-+		.name = "mtk-pwm",
-+		.owner = THIS_MODULE,
-+		.of_match_table = mtk_pwm_of_match,
-+	},
-+	.probe = mtk_pwm_probe,
-+	.remove = mtk_pwm_remove,
-+};
-+
-+module_platform_driver(mtk_pwm_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_ALIAS("platform:mtk-pwm");
diff --git a/target/linux/ramips/patches-5.10/850-awake-rt305x-dwc2-controller.patch b/target/linux/ramips/patches-5.10/850-awake-rt305x-dwc2-controller.patch
deleted file mode 100644
index 5c87298f3672..000000000000
--- a/target/linux/ramips/patches-5.10/850-awake-rt305x-dwc2-controller.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -465,6 +465,12 @@ static int dwc2_driver_probe(struct plat
- 	if (retval)
- 		return retval;
- 
-+	/* Enable USB port before any regs access */
-+	if (readl(hsotg->regs + PCGCTL) & 0x0f) {
-+		writel(0x00, hsotg->regs + PCGCTL);
-+		/* TODO: mdelay(25) here? vendor driver don't use it */
-+	}
-+
- 	hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
- 
- 	retval = dwc2_get_dr_mode(hsotg);
diff --git a/target/linux/ramips/patches-5.10/855-linkit_bootstrap.patch b/target/linux/ramips/patches-5.10/855-linkit_bootstrap.patch
deleted file mode 100644
index 379aa28ae28b..000000000000
--- a/target/linux/ramips/patches-5.10/855-linkit_bootstrap.patch
+++ /dev/null
@@ -1,97 +0,0 @@
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_GENWQE)		+= genwqe/
- obj-$(CONFIG_ECHO)		+= echo/
- obj-$(CONFIG_CXL_BASE)		+= cxl/
- obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
-+obj-$(CONFIG_SOC_MT7620)	+= linkit.o
- obj-$(CONFIG_OCXL)		+= ocxl/
- obj-y				+= cardreader/
- obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
---- /dev/null
-+++ b/drivers/misc/linkit.c
-@@ -0,0 +1,84 @@
-+/*
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  publishhed by the Free Software Foundation.
-+ *
-+ *  Copyright (C) 2015 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/gpio.h>
-+
-+#define LINKIT_LATCH_GPIO	11
-+
-+struct linkit_hw_data {
-+	char board[16];
-+	char rev[16];
-+};
-+
-+static void sanify_string(char *s)
-+{
-+	int i;
-+
-+	for (i = 0; i < 15; i++)
-+		if (s[i] <= 0x20)
-+			s[i] = '\0';
-+	s[15] = '\0';
-+}
-+
-+static int linkit_probe(struct platform_device *pdev)
-+{
-+	struct linkit_hw_data hw;
-+	struct mtd_info *mtd;
-+	size_t retlen;
-+	int ret;
-+
-+	mtd = get_mtd_device_nm("factory");
-+	if (IS_ERR(mtd))
-+		return PTR_ERR(mtd);
-+
-+	ret = mtd_read(mtd, 0x400, sizeof(hw), &retlen, (u_char *) &hw);
-+	put_mtd_device(mtd);
-+
-+	sanify_string(hw.board);
-+	sanify_string(hw.rev);
-+
-+	dev_info(&pdev->dev, "Version  : %s\n", hw.board);
-+	dev_info(&pdev->dev, "Revision : %s\n", hw.rev);
-+
-+	if (!strcmp(hw.board, "LINKITS7688")) {
-+		dev_info(&pdev->dev, "setting up bootstrap latch\n");
-+
-+		if (devm_gpio_request(&pdev->dev, LINKIT_LATCH_GPIO, "bootstrap")) {
-+			dev_err(&pdev->dev, "failed to setup bootstrap gpio\n");
-+			return -1;
-+		}
-+		gpio_direction_output(LINKIT_LATCH_GPIO, 0);
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id linkit_match[] = {
-+	{ .compatible = "mediatek,linkit" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, linkit_match);
-+
-+static struct platform_driver linkit_driver = {
-+	.probe = linkit_probe,
-+	.driver = {
-+		.name = "mtk-linkit",
-+		.owner = THIS_MODULE,
-+		.of_match_table = linkit_match,
-+	},
-+};
-+
-+int __init linkit_init(void)
-+{
-+	return platform_driver_register(&linkit_driver);
-+}
-+late_initcall_sync(linkit_init);
diff --git a/target/linux/ramips/rt288x/config-5.10 b/target/linux/ramips/rt288x/config-5.10
deleted file mode 100644
index 8aff187cb6bf..000000000000
--- a/target/linux/ramips/rt288x/config-5.10
+++ /dev/null
@@ -1,178 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_RT2880_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIO_RALINK=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_L1_CACHE_SHIFT_4=y
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_LZMA_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NET_RALINK_MDIO_RT2880=y
-CONFIG_NET_RALINK_RT2880=y
-CONFIG_NET_RALINK_SOC=y
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NLS=m
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-# CONFIG_PCI_MT7621 is not set
-# CONFIG_PCI_MT7621_PHY is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_RALINK_USB is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_AW9523 is not set
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_WDT=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
-CONFIG_SOC_RT288X=y
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB=m
-CONFIG_USB_COMMON=m
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_HCD_PLATFORM=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PLATFORM=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/ramips/rt305x/config-5.10 b/target/linux/ramips/rt305x/config-5.10
deleted file mode 100644
index ba3691271822..000000000000
--- a/target/linux/ramips/rt305x/config-5.10
+++ /dev/null
@@ -1,178 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_SYSTICK_QUIRK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_RT3352=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_RT305X_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIO_RALINK=y
-CONFIG_GPIO_WATCHDOG=y
-# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPLIT_JIMAGE_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_ESW_RT3050=y
-CONFIG_NET_RALINK_RT3050=y
-CONFIG_NET_RALINK_SOC=y
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-# CONFIG_PCI_MT7621 is not set
-# CONFIG_PCI_MT7621_PHY is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_AW9523 is not set
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-# CONFIG_RALINK_ILL_ACC is not set
-CONFIG_RALINK_WDT=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-CONFIG_SOC_RT305X=y
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/ramips/rt3883/config-5.10 b/target/linux/ramips/rt3883/config-5.10
deleted file mode 100644
index aaccbddefda1..000000000000
--- a/target/linux/ramips/rt3883/config-5.10
+++ /dev/null
@@ -1,178 +0,0 @@
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_RT3883_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIO_RALINK=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NET_RALINK_MDIO_RT2880=y
-CONFIG_NET_RALINK_RT3883=y
-CONFIG_NET_RALINK_SOC=y
-CONFIG_NET_VENDOR_RALINK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-# CONFIG_PCI_MT7621 is not set
-# CONFIG_PCI_MT7621_PHY is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_AW9523 is not set
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_WDT=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367B_PHY=y
-CONFIG_RTL8367_PHY=y
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-CONFIG_SOC_RT3883=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10mp-f.dts b/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10mp-f.dts
deleted file mode 100644
index 664cab599981..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10mp-f.dts
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl83xx_d-link_dgs-1210_common.dtsi"
-#include "rtl83xx_d-link_dgs-1210_gpio.dtsi"
-
-/ {
-	compatible = "d-link,dgs-1210-10mp-f", "realtek,rtl8382-soc", "realtek,rtl838x-soc";
-
-	model = "D-Link DGS-1210-10MP F";
-
-	/* i2c for sfp port9 */
-	i2c0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp0: sfp-p9 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	/* i2c for sfp port10 */
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp1: sfp-p10 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&leds {
-	link_act {
-		label = "green:link_act";
-		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-	};
-
-	poe {
-		label = "green:poe";
-		gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	};
-
-	poe_max {
-		label = "yellow:poe_max";
-		gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&keys {
-	mode {
-		label = "mode";
-		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-		linux,code = <KEY_LIGHTS_TOGGLE>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-		INTERNAL_PHY(24)
-		INTERNAL_PHY(26)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		port@24 {
-			reg = <24>;
-			label = "lan9";
-			phy-handle = <&phy24>;
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp0>;
-		};
-
-		port@26 {
-			reg = <26>;
-			label = "lan10";
-			phy-handle = <&phy26>;
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp1>;
-		};
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_engenius_ews2910p.dts b/target/linux/realtek/dts-5.10/rtl8380_engenius_ews2910p.dts
deleted file mode 100644
index 9b5ddb5ed411..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_engenius_ews2910p.dts
+++ /dev/null
@@ -1,229 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "engenius,ews2910p", "realtek,rtl838x-soc";
-	model = "EnGenius EWS2910P";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_fault;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		led_mode {
-			label = "led-mode";
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-	};
-
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <0>;
-
-		poe_enable {
-			gpio-hog;
-			gpios = <1 GPIO_ACTIVE_HIGH>;
-			output-high;
-			line-name = "poe-enable";
-		};
-
-		sff_p9_gpios {
-			gpio-hog;
-			gpios = < 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>,
-				< 11 GPIO_ACTIVE_HIGH>, /* los-gpio */
-				< 12 GPIO_ACTIVE_LOW>;   /* mod-def0-gpio */
-			input;
-			line-name = "sff-p9-gpios";
-		};
-	};
-
-	gpio-export {
-		compatible = "gpio-export";
-
-		sff-p9-tx-disable {
-			gpio-export,name = "sff-p9-tx-disable";
-			gpio-export,output = <1>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: led-0 {
-			label = "green:power";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		};
-
-		led_lan_mode: led-1 {
-			label = "green:lan-mode";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		led_fault: led-2 {
-			label = "amber:fault";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		led_poe_max: led-3 {
-			label = "amber:poe-max";
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-	sfp1: sfp-p10 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		tx-disable-gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		los-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x80000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "u-boot-env";
-				reg = <0x80000 0x10000>;
-				read-only;
-			};
-			partition@90000 {
-				label = "u-boot-env2";
-				reg = <0x90000 0x10000>;
-			};
-			partition@a0000 {
-				label = "rootfs_data";
-				reg = <0xa0000 0xd60000>;
-			};
-			partition@e00000 {
-				label = "jffs2-log";
-				reg = <0xe00000 0x200000>;
-			};
-			partition@1000000 {
-				compatible = "openwrt,uimage";
-				label = "firmware";
-				reg = <0x1000000 0x800000>;
-				openwrt,ih-magic = <0x03802910>;
-			};
-			partition@1800000 {
-				label = "firmware2";
-				reg = <0x1800000 0x800000>;
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		INTERNAL_PHY(24)
-		INTERNAL_PHY(26)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		SWITCH_SFP_PORT(24, 9, 1000base-x)
-
-		port@26 {
-			reg = <26>;
-			label = "lan10";
-			phy-mode = "1000base-x";
-			phy-handle = <&phy26>;
-			managed = "in-band-status";
-			sfp = <&sfp1>;
-		};
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_hpe_1920-8g.dts b/target/linux/realtek/dts-5.10/rtl8380_hpe_1920-8g.dts
deleted file mode 100644
index 6ddb2d8dcc60..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_hpe_1920-8g.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl838x_hpe_1920.dtsi"
-
-/ {
-	compatible = "hpe,1920-8g", "realtek,rtl838x-soc";
-	model = "HPE 1920-8G (JG920A)";
-
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <0>;
-	};
-
-	i2c0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp0: sfp-0 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>;
-		// tx-fault and tx-disable unconnected
-	};
-
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp1: sfp-1 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
-		// tx-fault and tx-disable unconnected
-	};
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		INTERNAL_PHY(24)
-		INTERNAL_PHY(26)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		port@24 {
-			reg = <24>;
-			label = "lan9";
-			phy-handle = <&phy24>;
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp0>;
-		};
-
-		port@26 {
-			reg = <26>;
-			label = "lan10";
-			phy-handle = <&phy26>;
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp1>;
-		};
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi
deleted file mode 100644
index 5e587f278d6d..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "realtek,rtl838x-soc";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	keys {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_disable_sys_led>;
-
-		compatible = "gpio-keys";
-
-		mode {
-			label = "reset";
-			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		open-source;
-	};
-
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <31>;
-	};
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_1xx.dtsi b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_1xx.dtsi
deleted file mode 100644
index fd44543bb42a..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_1xx.dtsi
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_netgear_gigabit.dtsi"
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x00e0000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "u-boot-env";
-				reg = <0x00e0000 0x0010000>;
-			};
-
-			partition@f0000 {
-				label = "u-boot-env2";
-				reg = <0x00f0000 0x0010000>;
-			};
-
-			partition@100000 {
-				label = "jffs";
-				reg = <0x0100000 0x0100000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "jffs2";
-				reg = <0x0200000 0x0100000>;
-				read-only;
-			};
-
-			partition@300000 {
-				label = "firmware";
-				compatible = "openwrt,uimage", "denx,uimage";
-				openwrt,ih-magic = <0x4e474520>;
-				reg = <0x0300000 0x0e80000>;
-			};
-
-			partition@1180000 {
-				label = "runtime2";
-				reg = <0x1180000 0x0e80000>;
-				read-only;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_3xx.dtsi b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_3xx.dtsi
deleted file mode 100644
index 0ade665c988a..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_3xx.dtsi
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_netgear_gigabit.dtsi"
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x00e0000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "u-boot-env";
-				reg = <0x00e0000 0x0010000>;
-			};
-
-			partition@f0000 {
-				label = "u-boot-env2";
-				reg = <0x00f0000 0x0010000>;
-			};
-
-			partition@100000 {
-				label = "jffs";
-				reg = <0x0100000 0x0100000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "jffs2";
-				reg = <0x0200000 0x0100000>;
-				read-only;
-			};
-
-			partition@300000 {
-				label = "firmware";
-				compatible = "openwrt,uimage", "denx,uimage";
-				openwrt,ih-magic = <0x4e474335>;
-				reg = <0x0300000 0x0e80000>;
-			};
-
-			partition@1180000 {
-				label = "runtime2";
-				reg = <0x1180000 0x0e80000>;
-				read-only;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs108t-v3.dts b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs108t-v3.dts
deleted file mode 100644
index e149834d4461..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs108t-v3.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_netgear_gigabit_1xx.dtsi"
-
-#include <dt-bindings/leds/common.h>
-
-/ {
-	compatible = "netgear,gs108t-v3", "realtek,rtl838x-soc";
-	model = "Netgear GS108T v3";
-
-	aliases {
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_amber;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_amber;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power_amber: led-0 {
-			label = "amber:power";
-			color = <LED_COLOR_ID_AMBER>;
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio1 32 GPIO_ACTIVE_LOW>;
-		};
-
-		led_power_green: led-1 {
-			label = "green:power";
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs110tpp-v1.dts b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs110tpp-v1.dts
deleted file mode 100644
index b61af62ea536..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs110tpp-v1.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_netgear_gigabit_1xx.dtsi"
-#include <dt-bindings/leds/common.h>
-
-/ {
-	compatible = "netgear,gs110tpp-v1", "realtek,rtl838x-soc";
-	model = "Netgear GS110TPP v1";
-
-	aliases {
-		led-boot = &led_status_green;
-		led-failsafe = &led_status_red;
-		led-running = &led_status_green;
-		led-upgrade = &led_status_blue;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_status_red: led-0 {
-			label = "red:status";
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-		};
-
-		led_status_green: led-1 {
-			label = "green:status";
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio1 32 GPIO_ACTIVE_LOW>;
-		};
-
-		led_status_blue: led-2 {
-			label = "blue:status";
-			color = <LED_COLOR_ID_BLUE>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio1 34 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&mdio {
-	EXTERNAL_PHY(16)
-	EXTERNAL_PHY(17)
-};
-
-&switch0 {
-	ports {
-		SWITCH_PORT(16, 9, qsgmii)
-		SWITCH_PORT(17, 10, qsgmii)
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs308t-v1.dts b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs308t-v1.dts
deleted file mode 100644
index cd69e80186c3..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs308t-v1.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_netgear_gigabit_3xx.dtsi"
-
-#include <dt-bindings/leds/common.h>
-
-/ {
-	compatible = "netgear,gs308t-v1", "realtek,rtl838x-soc";
-	model = "Netgear GS308T v1";
-
-	aliases {
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_amber;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_amber;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power_amber: led-0 {
-			label = "amber:power";
-			color = <LED_COLOR_ID_AMBER>;
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio1 32 GPIO_ACTIVE_LOW>;
-		};
-
-		led_power_green: led-1 {
-			label = "green:power";
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs310tp-v1.dts b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs310tp-v1.dts
deleted file mode 100644
index dacd504ac498..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs310tp-v1.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_netgear_gigabit_3xx.dtsi"
-
-/ {
-	compatible = "netgear,gs310tp-v1", "realtek,rtl838x-soc";
-	model = "Netgear GS310TP v1";
-
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&mdio {
-	INTERNAL_PHY(24)
-	INTERNAL_PHY(26)
-};
-
-&switch0 {
-	ports {
-		SWITCH_SFP_PORT(24, 9, rgmii-id)
-		SWITCH_SFP_PORT(26, 10, rgmii-id)
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_panasonic_m8eg-pn28080k.dts b/target/linux/realtek/dts-5.10/rtl8380_panasonic_m8eg-pn28080k.dts
deleted file mode 100644
index f9d58f5b66e6..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_panasonic_m8eg-pn28080k.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "panasonic,m8eg-pn28080k", "realtek,rtl8380-soc";
-	model = "Panasonic Switch-M8eG PN28080K";
-
-	aliases {
-		led-boot = &led_status_eco_green;
-		led-failsafe = &led_status_eco_amber;
-		led-running = &led_status_eco_green;
-		led-upgrade = &led_status_eco_green;
-	};
-
-	sfp0: sfp-p9 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&leds {
-	led_status_eco_amber: led-5 {
-		label = "amber:status_eco";
-		gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		color = <LED_COLOR_ID_AMBER>;
-		function = LED_FUNCTION_STATUS;
-		function-enumerator = <1>;
-	};
-
-	led_status_eco_green: led-6 {
-		label = "green:status_eco";
-		gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_STATUS;
-		function-enumerator = <2>;
-	};
-};
-
-&i2c_gpio_0 {
-	scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&i2c_gpio_1 {
-	scl-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&gpio1 {
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&gpio2 {
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&i2c_switch {
-	i2c0: i2c@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-	};
-};
-
-&ethernet0 {
-	mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		INTERNAL_PHY(24)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		port@24 {
-			reg = <24>;
-			label = "lan9";
-			phy-mode = "1000base-x";
-			phy-handle = <&phy24>;
-			managed = "in-band-status";
-			sfp = <&sfp0>;
-		};
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_tplink_sg2008p-v1.dts b/target/linux/realtek/dts-5.10/rtl8380_tplink_sg2008p-v1.dts
deleted file mode 100644
index bf43e412b1c6..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_tplink_sg2008p-v1.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_tplink_sg2xxx.dtsi"
-
-/ {
-	compatible = "tplink,sg2008p-v1", "realtek,rtl838x-soc";
-	model = "TP-Link SG2008P v1";
-};
-
-&tps23861_20 {
-	status = "disabled";
-};
-
-&phy24 {
-	status = "disabled";
-};
-
-&phy26 {
-	status = "disabled";
-};
-
-&port24 {
-	status = "disabled";
-};
-
-&port26 {
-	status = "disabled";
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_tplink_sg2210p-v3.dts b/target/linux/realtek/dts-5.10/rtl8380_tplink_sg2210p-v3.dts
deleted file mode 100644
index 4b0022c38890..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_tplink_sg2210p-v3.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_tplink_sg2xxx.dtsi"
-
-/ {
-	compatible = "tplink,sg2210p-v3", "realtek,rtl838x-soc";
-	model = "TP-Link SG2210P v3";
-};
-
-&port24 {
-	label = "lan-sfp2";
-};
-
-&port26 {
-	label = "lan-sfp1";
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_tplink_sg2xxx.dtsi b/target/linux/realtek/dts-5.10/rtl8380_tplink_sg2xxx.dtsi
deleted file mode 100644
index e727a9405ad7..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_tplink_sg2xxx.dtsi
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-		label-mac-device = &ethernet0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: led-0 {
-			label = "green:power";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		tps23861_20: tps23861@20 {
-			compatible = "ti,tps23861";
-			reg = <0x20>;
-			shunt-resistor-micro-ohms = <255000>;
-		};
-
-		tps23861_28: tps23861@28 {
-			compatible = "ti,tps23861";
-			reg = <0x28>;
-			shunt-resistor-micro-ohms = <255000>;
-		};
-	};
-
-	watchdog {
-		compatible = "linux,wdt-gpio";
-		gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-		hw_algo = "toggle";
-		/* SGM706 specs: typical 1.6s, but minimum 1.0s. */
-		hw_margin_ms = <1000>;
-	};
-};
-
-&gpio0 {
-	watchdog-enable {
-		gpio-hog;
-		gpios = <14 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "watchdog-enable";
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0xe0000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "u-boot-env";
-				reg = <0xe0000 0x20000>;
-			};
-			partition@100000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x100000 0x1a00000>;
-			};
-			partition@1b00000 {
-				label = "usrappfs";
-				reg = <0x1b00000 0x400000>;
-			};
-			partition@1f00000 {
-				compatible = "nvmem-cells";
-				label = "para";
-				reg = <0x1f00000 0x100000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				read-only;
-
-				factory_macaddr: macaddr@fdff4 {
-					reg = <0xfdff4 0x6>;
-				};
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	nvmem-cells = <&factory_macaddr>;
-	nvmem-cell-names = "mac-address";
-
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		INTERNAL_PHY(24)
-		INTERNAL_PHY(26)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(15, 1, internal)
-		SWITCH_PORT(14, 2, internal)
-		SWITCH_PORT(13, 3, internal)
-		SWITCH_PORT(12, 4, internal)
-		SWITCH_PORT(11, 5, internal)
-		SWITCH_PORT(10, 6, internal)
-		SWITCH_PORT(9, 7, internal)
-		SWITCH_PORT(8, 8, internal)
-
-		SWITCH_SFP_PORT(24, 9, 1000base-x)
-		SWITCH_SFP_PORT(26, 10, 1000base-x)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-10hp.dts b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-10hp.dts
deleted file mode 100644
index 82df6789a95c..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-10hp.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_zyxel_gs1900.dtsi"
-
-/ {
-	compatible = "zyxel,gs1900-10hp", "realtek,rtl838x-soc";
-	model = "ZyXEL GS1900-10HP Switch";
-
-	/* i2c of the left SFP cage: port 9 */
-	i2c0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp0: sfp-p9 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-	};
-
-	/* i2c of the right SFP cage: port 10 */
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp1: sfp-p10 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&mdio {
-	INTERNAL_PHY(24)
-	INTERNAL_PHY(26)
-};
-
-&switch0 {
-	ports {
-		port@24 {
-			reg = <24>;
-			label = "lan9";
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp0>;
-		};
-
-		port@26 {
-			reg = <26>;
-			label = "lan10";
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp1>;
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8.dts b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8.dts
deleted file mode 100644
index e9c5efe60392..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8.dts
+++ /dev/null
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_zyxel_gs1900.dtsi"
-
-/ {
-	compatible = "zyxel,gs1900-8", "realtek,rtl838x-soc";
-	model = "ZyXEL GS1900-8 Switch";
-};
-
-&gpio1 {
-	/delete-node/ poe_enable;
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v1.dts b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v1.dts
deleted file mode 100644
index 5ee340eac682..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v1.dts
+++ /dev/null
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_zyxel_gs1900.dtsi"
-
-/ {
-	compatible = "zyxel,gs1900-8hp-v1", "realtek,rtl838x-soc";
-	model = "ZyXEL GS1900-8HP v1 Switch";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v2.dts b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v2.dts
deleted file mode 100644
index 076846225556..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v2.dts
+++ /dev/null
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_zyxel_gs1900.dtsi"
-
-/ {
-	compatible = "zyxel,gs1900-8hp-v2", "realtek,rtl838x-soc";
-	model = "ZyXEL GS1900-8HP v2 Switch";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi
deleted file mode 100644
index 5993c1b798df..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	aliases {
-		led-boot = &led_sys;
-		led-failsafe = &led_sys;
-		led-running = &led_sys;
-		led-upgrade = &led_sys;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_disable_sys_led>;
-		compatible = "gpio-leds";
-
-		led_sys: sys {
-			label = "green:sys";
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <0>;
-
-		poe_enable {
-			gpio-hog;
-			gpios = <13 GPIO_ACTIVE_HIGH>;
-			output-high;
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "u-boot-env";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-			partition@50000 {
-				label = "u-boot-env2";
-				reg = <0x50000 0x10000>;
-			};
-			partition@60000 {
-				label = "jffs";
-				reg = <0x60000 0x100000>;
-			};
-			partition@160000 {
-				label = "jffs2";
-				reg = <0x160000 0x100000>;
-			};
-			partition@b260000 {
-				label = "firmware";
-				reg = <0x260000 0x6d0000>;
-				compatible = "openwrt,uimage", "denx,uimage";
-				openwrt,ih-magic = <0x83800000>;
-			};
-			partition@930000 {
-				label = "runtime2";
-				reg = <0x930000 0x6d0000>;
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_allnet_all-sg8208m.dts b/target/linux/realtek/dts-5.10/rtl8382_allnet_all-sg8208m.dts
deleted file mode 100644
index 320cb08ac7de..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_allnet_all-sg8208m.dts
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "allnet,all-sg8208m", "realtek,rtl838x-soc";
-	model = "ALLNET ALL-SG8208M";
-
-	aliases {
-		led-boot = &led_sys;
-		led-failsafe = &led_sys;
-		led-running = &led_sys;
-		led-upgrade = &led_sys;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		/* is this pin 3 on the external RTL8231 (&gpio1)? */
-		/*reset {
-			label = "reset";
-			gpios = <&gpio0 67 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};*/
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_disable_sys_led>;
-		compatible = "gpio-leds";
-
-		led_sys: sys {
-			label = "green:sys";
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		};
-		// GPIO 25: power on/off all port leds
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "u-boot-env";
-				reg = <0x80000 0x10000>;
-				read-only;
-			};
-
-			partition@90000 {
-				label = "u-boot-env2";
-				reg = <0x90000 0x10000>;
-			};
-
-			partition@a0000 {
-				label = "jffs";
-				reg = <0xa0000 0x100000>;
-			};
-
-			partition@1a0000 {
-				label = "jffs2";
-				reg = <0x1a0000 0x100000>;
-			};
-
-			partition@2a0000 {
-				label = "firmware";
-				reg = <0x2a0000 0xd60000>;
-				compatible = "openwrt,uimage", "denx,uimage";
-				openwrt,ih-magic = <0x00000006>;
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_apresia_aplgs120gtss.dts b/target/linux/realtek/dts-5.10/rtl8382_apresia_aplgs120gtss.dts
deleted file mode 100644
index 15120265c97c..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_apresia_aplgs120gtss.dts
+++ /dev/null
@@ -1,270 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	compatible = "apresia,aplgs120gtss", "realtek,rtl8382-soc";
-	model = "APRESIA ApresiaLightGS120GT-SS";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: led-0 {
-			label = "green:pwr";
-			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_POWER;
-		};
-
-		led-1 {
-			label = "red:loop";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_FAULT;
-		};
-
-		/* LED chip is soldered, but no hole on the case */
-		led-2 {
-			label = "green:unused";
-			gpios = <&gpio1 36 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio1 33 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio1 34 GPIO_ACTIVE_LOW>;
-		open-source;
-	};
-
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <0>;
-	};
-
-	i2c0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	i2c2: i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	i2c3: i2c-gpio-3 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	/* 4x TX-Disable lines are provided by RTL8214FC */
-	sfp0: sfp-p17 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
-	};
-
-	sfp1: sfp-p18 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-	};
-
-	sfp2: sfp-p19 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c3>;
-		los-gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 24 GPIO_ACTIVE_LOW>;
-	};
-
-	sfp3: sfp-p20 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c2>;
-		los-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&gpio0 {
-	rtl8231_reset {
-		gpio-hog;
-		gpios = <1 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "rtl8231-reset";
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "u-boot-env";
-				reg = <0x80000 0x40000>;
-			};
-
-			partition@c0000 {
-				label = "u-boot-env2";
-				reg = <0xc0000 0x40000>;
-			};
-
-			partition@100000 {
-				compatible = "openwrt,uimage", "denx,uimage";
-				label = "firmware";
-				reg = <0x100000 0xe80000>;
-				openwrt,ih-magic = <0x12345000>;
-			};
-
-			partition@f80000 {
-				label = "firmware2";
-				reg = <0xf80000 0xe80000>;
-			};
-
-			partition@1e00000 {
-				label = "jffs2";
-				reg = <0x1e00000 0x200000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		EXTERNAL_PHY(0)
-		EXTERNAL_PHY(1)
-		EXTERNAL_PHY(2)
-		EXTERNAL_PHY(3)
-		EXTERNAL_PHY(4)
-		EXTERNAL_PHY(5)
-		EXTERNAL_PHY(6)
-		EXTERNAL_PHY(7)
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		EXTERNAL_SFP_PHY_FULL(24, 0)
-		EXTERNAL_SFP_PHY_FULL(25, 1)
-		EXTERNAL_SFP_PHY_FULL(26, 2)
-		EXTERNAL_SFP_PHY_FULL(27, 3)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, internal)
-		SWITCH_PORT(9, 10, internal)
-		SWITCH_PORT(10, 11, internal)
-		SWITCH_PORT(11, 12, internal)
-		SWITCH_PORT(12, 13, internal)
-		SWITCH_PORT(13, 14, internal)
-		SWITCH_PORT(14, 15, internal)
-		SWITCH_PORT(15, 16, internal)
-
-		SWITCH_PORT(24, 17, qsgmii)
-		SWITCH_PORT(25, 18, qsgmii)
-		SWITCH_PORT(26, 19, qsgmii)
-		SWITCH_PORT(27, 20, qsgmii)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts
deleted file mode 100644
index 16934ede3b88..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl83xx_d-link_dgs-1210_common.dtsi"
-
-/ {
-	compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc";
-	model = "D-Link DGS-1210-10P";
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		mode {
-			label = "mode";
-			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_LIGHTS_TOGGLE>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&gpio1 33 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		link_act {
-			label = "green:link_act";
-			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-		};
-
-		poe {
-			label = "green:poe";
-			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-		};
-
-		poe_max {
-			label = "yellow:poe_max";
-			gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <0>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-		INTERNAL_PHY(24)
-		INTERNAL_PHY(26)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-		SWITCH_SFP_PORT(24, 9, rgmii-id)
-		SWITCH_SFP_PORT(26, 10, rgmii-id)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-16.dts b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-16.dts
deleted file mode 100644
index 35f41b9e4d56..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-16.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl83xx_d-link_dgs-1210_common.dtsi"
-
-/ {
-	compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc";
-	model = "D-Link DGS-1210-16";
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		EXTERNAL_PHY(0)
-		EXTERNAL_PHY(1)
-		EXTERNAL_PHY(2)
-		EXTERNAL_PHY(3)
-		EXTERNAL_PHY(4)
-		EXTERNAL_PHY(5)
-		EXTERNAL_PHY(6)
-		EXTERNAL_PHY(7)
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		EXTERNAL_SFP_PHY(24)
-		EXTERNAL_SFP_PHY(25)
-		EXTERNAL_SFP_PHY(26)
-		EXTERNAL_SFP_PHY(27)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, internal)
-		SWITCH_PORT(9, 10, internal)
-		SWITCH_PORT(10, 11, internal)
-		SWITCH_PORT(11, 12, internal)
-		SWITCH_PORT(12, 13, internal)
-		SWITCH_PORT(13, 14, internal)
-		SWITCH_PORT(14, 15, internal)
-		SWITCH_PORT(15, 16, internal)
-
-		SWITCH_PORT(24, 17, qsgmii)
-		SWITCH_PORT(25, 18, qsgmii)
-		SWITCH_PORT(26, 19, qsgmii)
-		SWITCH_PORT(27, 20, qsgmii)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-20.dts b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-20.dts
deleted file mode 100644
index dacc50676d4f..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-20.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl83xx_d-link_dgs-1210_common.dtsi"
-#include "rtl83xx_d-link_dgs-1210_gpio.dtsi"
-
-/ {
-	compatible = "d-link,dgs-1210-20", "realtek,rtl838x-soc";
-	model = "D-Link DGS-1210-20";
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		EXTERNAL_PHY(0)
-		EXTERNAL_PHY(1)
-		EXTERNAL_PHY(2)
-		EXTERNAL_PHY(3)
-		EXTERNAL_PHY(4)
-		EXTERNAL_PHY(5)
-		EXTERNAL_PHY(6)
-		EXTERNAL_PHY(7)
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		EXTERNAL_SFP_PHY(24)
-		EXTERNAL_SFP_PHY(25)
-		EXTERNAL_SFP_PHY(26)
-		EXTERNAL_SFP_PHY(27)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, internal)
-		SWITCH_PORT(9, 10, internal)
-		SWITCH_PORT(10, 11, internal)
-		SWITCH_PORT(11, 12, internal)
-		SWITCH_PORT(12, 13, internal)
-		SWITCH_PORT(13, 14, internal)
-		SWITCH_PORT(14, 15, internal)
-		SWITCH_PORT(15, 16, internal)
-
-		SWITCH_PORT(24, 17, qsgmii)
-		SWITCH_PORT(25, 18, qsgmii)
-		SWITCH_PORT(26, 19, qsgmii)
-		SWITCH_PORT(27, 20, qsgmii)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28.dts b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28.dts
deleted file mode 100644
index 0bcb196b7c97..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28.dts
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl83xx_d-link_dgs-1210_common.dtsi"
-#include "rtl83xx_d-link_dgs-1210_gpio.dtsi"
-#include "rtl8382_d-link_dgs-1210-28_common.dtsi"
-
-/ {
-	compatible = "d-link,dgs-1210-28", "realtek,rtl838x-soc";
-	model = "D-Link DGS-1210-28";
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28_common.dtsi b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28_common.dtsi
deleted file mode 100644
index 17866d5f038f..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28_common.dtsi
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		EXTERNAL_PHY(0)
-		EXTERNAL_PHY(1)
-		EXTERNAL_PHY(2)
-		EXTERNAL_PHY(3)
-		EXTERNAL_PHY(4)
-		EXTERNAL_PHY(5)
-		EXTERNAL_PHY(6)
-		EXTERNAL_PHY(7)
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		EXTERNAL_PHY(16)
-		EXTERNAL_PHY(17)
-		EXTERNAL_PHY(18)
-		EXTERNAL_PHY(19)
-		EXTERNAL_PHY(20)
-		EXTERNAL_PHY(21)
-		EXTERNAL_PHY(22)
-		EXTERNAL_PHY(23)
-
-		EXTERNAL_SFP_PHY(24)
-		EXTERNAL_SFP_PHY(25)
-		EXTERNAL_SFP_PHY(26)
-		EXTERNAL_SFP_PHY(27)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, internal)
-		SWITCH_PORT(9, 10, internal)
-		SWITCH_PORT(10, 11, internal)
-		SWITCH_PORT(11, 12, internal)
-		SWITCH_PORT(12, 13, internal)
-		SWITCH_PORT(13, 14, internal)
-		SWITCH_PORT(14, 15, internal)
-		SWITCH_PORT(15, 16, internal)
-
-		SWITCH_PORT(16, 17, qsgmii)
-		SWITCH_PORT(17, 18, qsgmii)
-		SWITCH_PORT(18, 19, qsgmii)
-		SWITCH_PORT(19, 20, qsgmii)
-		SWITCH_PORT(20, 21, qsgmii)
-		SWITCH_PORT(21, 22, qsgmii)
-		SWITCH_PORT(22, 23, qsgmii)
-		SWITCH_PORT(23, 24, qsgmii)
-
-		SWITCH_PORT(24, 25, qsgmii)
-		SWITCH_PORT(25, 26, qsgmii)
-		SWITCH_PORT(26, 27, qsgmii)
-		SWITCH_PORT(27, 28, qsgmii)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28mp-f.dts b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28mp-f.dts
deleted file mode 100644
index ce008229b333..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28mp-f.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl83xx_d-link_dgs-1210_common.dtsi"
-#include "rtl83xx_d-link_dgs-1210_gpio.dtsi"
-#include "rtl8382_d-link_dgs-1210-28_common.dtsi"
-
-/ {
-	compatible = "d-link,dgs-1210-28mp-f", "realtek,rtl8382-soc", "realtek,rtl838x-soc";
-	model = "D-Link DGS-1210-28MP F";
-};
-
-&leds {
-	link_act {
-		label = "green:link_act";
-		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-	};
-
-	poe {
-		label = "green:poe";
-		gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	};
-
-	poe_max {
-		label = "yellow:poe_max";
-		gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&keys {
-	mode {
-		label = "mode";
-		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-		linux,code = <BTN_0>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_hpe_1920-16g.dts b/target/linux/realtek/dts-5.10/rtl8382_hpe_1920-16g.dts
deleted file mode 100644
index 59043b2f6f79..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_hpe_1920-16g.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl8382_hpe_1920.dtsi"
-
-/ {
-	compatible = "hpe,1920-16g", "realtek,rtl838x-soc";
-	model = "HPE 1920-16G (JG923A)";
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		SWITCH_PORT(16, 9, qsgmii)
-		SWITCH_PORT(17, 10, qsgmii)
-		SWITCH_PORT(18, 11, qsgmii)
-		SWITCH_PORT(19, 12, qsgmii)
-		SWITCH_PORT(20, 13, qsgmii)
-		SWITCH_PORT(21, 14, qsgmii)
-		SWITCH_PORT(22, 15, qsgmii)
-		SWITCH_PORT(23, 16, qsgmii)
-
-		SWITCH_PORT(24, 17, qsgmii)
-		SWITCH_PORT(25, 18, qsgmii)
-		SWITCH_PORT(26, 19, qsgmii)
-		SWITCH_PORT(27, 20, qsgmii)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_hpe_1920-24g.dts b/target/linux/realtek/dts-5.10/rtl8382_hpe_1920-24g.dts
deleted file mode 100644
index 61781c708e28..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_hpe_1920-24g.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl8382_hpe_1920.dtsi"
-
-/ {
-	compatible = "hpe,1920-24g", "realtek,rtl838x-soc";
-	model = "HPE 1920-24G (JG924A)";
-};
-
-&mdio {
-	EXTERNAL_PHY(0)
-	EXTERNAL_PHY(1)
-	EXTERNAL_PHY(2)
-	EXTERNAL_PHY(3)
-	EXTERNAL_PHY(4)
-	EXTERNAL_PHY(5)
-	EXTERNAL_PHY(6)
-	EXTERNAL_PHY(7)
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, internal)
-		SWITCH_PORT(9, 10, internal)
-		SWITCH_PORT(10, 11, internal)
-		SWITCH_PORT(11, 12, internal)
-		SWITCH_PORT(12, 13, internal)
-		SWITCH_PORT(13, 14, internal)
-		SWITCH_PORT(14, 15, internal)
-		SWITCH_PORT(15, 16, internal)
-
-		SWITCH_PORT(16, 17, qsgmii)
-		SWITCH_PORT(17, 18, qsgmii)
-		SWITCH_PORT(18, 19, qsgmii)
-		SWITCH_PORT(19, 20, qsgmii)
-		SWITCH_PORT(20, 21, qsgmii)
-		SWITCH_PORT(21, 22, qsgmii)
-		SWITCH_PORT(22, 23, qsgmii)
-		SWITCH_PORT(23, 24, qsgmii)
-
-		SWITCH_PORT(24, 25, qsgmii)
-		SWITCH_PORT(25, 26, qsgmii)
-		SWITCH_PORT(26, 27, qsgmii)
-		SWITCH_PORT(27, 28, qsgmii)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_hpe_1920.dtsi b/target/linux/realtek/dts-5.10/rtl8382_hpe_1920.dtsi
deleted file mode 100644
index 5368b41c2769..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_hpe_1920.dtsi
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl838x_hpe_1920.dtsi"
-
-/ {
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <0>;
-	};
-
-	i2c0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp0: sfp-0 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
-		// tx-fault unconnected
-		// tx-disable connected to RTL8214FC
-	};
-
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp1: sfp-1 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>;
-		// tx-fault unconnected
-		// tx-disable connected to RTL8214FC
-	};
-
-	i2c2: i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp2: sfp-2 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c2>;
-		los-gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-		// tx-fault unconnected
-		// tx-disable connected to RTL8214FC
-	};
-
-	i2c3: i2c-gpio-3 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp3: sfp-3 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c3>;
-		los-gpio = <&gpio1 34 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 33 GPIO_ACTIVE_LOW>;
-		// tx-fault unconnected
-		// tx-disable connected to RTL8214FC
-	};
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		EXTERNAL_PHY(16)
-		EXTERNAL_PHY(17)
-		EXTERNAL_PHY(18)
-		EXTERNAL_PHY(19)
-		EXTERNAL_PHY(20)
-		EXTERNAL_PHY(21)
-		EXTERNAL_PHY(22)
-		EXTERNAL_PHY(23)
-
-		EXTERNAL_SFP_PHY_FULL(24, 0)
-		EXTERNAL_SFP_PHY_FULL(25, 1)
-		EXTERNAL_SFP_PHY_FULL(26, 2)
-		EXTERNAL_SFP_PHY_FULL(27, 3)
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_inaba_aml2-17gp.dts b/target/linux/realtek/dts-5.10/rtl8382_inaba_aml2-17gp.dts
deleted file mode 100644
index 48081414941f..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_inaba_aml2-17gp.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "inaba,aml2-17gp", "realtek,rtl838x-soc";
-	model = "INABA Abaniact AML2-17GP";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	keys {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_disable_sys_led>;
-
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "u-boot-env";
-				reg = <0x80000 0x10000>;
-				read-only;
-			};
-
-			partition@90000 {
-				label = "u-boot-env2";
-				reg = <0x90000 0x10000>;
-			};
-
-			partition@a0000 {
-				label = "jffs2_cfg";
-				reg = <0xa0000 0x400000>;
-				read-only;
-			};
-
-			partition@4a0000 {
-				label = "jffs2_log";
-				reg = <0x4a0000 0x100000>;
-				read-only;
-			};
-
-			partition@5a0000 {
-				compatible = "openwrt,uimage", "denx,uimage";
-				label = "firmware";
-				reg = <0x5a0000 0xd30000>;
-				openwrt,ih-magic = <0x83800000>;
-			};
-
-			partition@12d0000 {
-				label = "runtime2";
-				reg = <0x12d0000 0xd30000>;
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		EXTERNAL_PHY(16)
-		EXTERNAL_PHY(17)
-		EXTERNAL_PHY(18)
-		EXTERNAL_PHY(19)
-		EXTERNAL_PHY(20)
-		EXTERNAL_PHY(21)
-		EXTERNAL_PHY(22)
-		EXTERNAL_PHY(23)
-
-		EXTERNAL_PHY(24)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		SWITCH_PORT(16, 9, qsgmii)
-		SWITCH_PORT(17, 10, qsgmii)
-		SWITCH_PORT(18, 11, qsgmii)
-		SWITCH_PORT(19, 12, qsgmii)
-		SWITCH_PORT(20, 13, qsgmii)
-		SWITCH_PORT(21, 14, qsgmii)
-		SWITCH_PORT(22, 15, qsgmii)
-		SWITCH_PORT(23, 16, qsgmii)
-
-		port@24 {
-			reg = <24>;
-			label = "wan";
-			phy-handle = <&phy24>;
-			phy-mode = "qsgmii";
-		};
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_iodata_bsh-g24mb.dts b/target/linux/realtek/dts-5.10/rtl8382_iodata_bsh-g24mb.dts
deleted file mode 100644
index d19960c10862..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_iodata_bsh-g24mb.dts
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	compatible = "iodata,bsh-g24mb", "realtek,rtl838x-soc";
-	model = "I-O DATA BSH-G24MB";
-
-	aliases {
-		led-boot = &led_sys_loop;
-		led-failsafe = &led_sys_loop;
-		led-upgrade = &led_sys_loop;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_disable_sys_led>;
-		compatible = "gpio-leds";
-
-		led_sys_loop: led {
-			label = "red:sys_loop";
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_STATUS;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <0>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "u-boot-env";
-				reg = <0x80000 0x10000>;
-				read-only;
-			};
-
-			partition@90000 {
-				label = "u-boot-env2";
-				reg = <0x90000 0x10000>;
-			};
-
-			partition@a0000 {
-				label = "jffs2_cfg";
-				reg = <0xa0000 0x100000>;
-				read-only;
-			};
-
-			partition@1a0000 {
-				label = "jffs2_log";
-				reg = <0x1a0000 0x100000>;
-				read-only;
-			};
-
-			/*
-			 * use 2x OS partitions in OpenWrt
-			 *
-			 * 0x2A0000-0x94FFFF: RUNTIME
-			 * 0x950000-0xFFFFFF: RUNTIME2 (not used in stock)
-			 */
-			partition@2a0000 {
-				compatible = "openwrt,uimage", "denx,uimage";
-				label = "firmware";
-				reg = <0x2a0000 0xd60000>;
-				openwrt,ih-magic = <0x83800013>;
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		EXTERNAL_PHY(0)
-		EXTERNAL_PHY(1)
-		EXTERNAL_PHY(2)
-		EXTERNAL_PHY(3)
-		EXTERNAL_PHY(4)
-		EXTERNAL_PHY(5)
-		EXTERNAL_PHY(6)
-		EXTERNAL_PHY(7)
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		EXTERNAL_PHY(16)
-		EXTERNAL_PHY(17)
-		EXTERNAL_PHY(18)
-		EXTERNAL_PHY(19)
-		EXTERNAL_PHY(20)
-		EXTERNAL_PHY(21)
-		EXTERNAL_PHY(22)
-		EXTERNAL_PHY(23)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, internal)
-		SWITCH_PORT(9, 10, internal)
-		SWITCH_PORT(10, 11, internal)
-		SWITCH_PORT(11, 12, internal)
-		SWITCH_PORT(12, 13, internal)
-		SWITCH_PORT(13, 14, internal)
-		SWITCH_PORT(14, 15, internal)
-		SWITCH_PORT(15, 16, internal)
-
-		SWITCH_PORT(16, 17, qsgmii)
-		SWITCH_PORT(17, 18, qsgmii)
-		SWITCH_PORT(18, 19, qsgmii)
-		SWITCH_PORT(19, 20, qsgmii)
-		SWITCH_PORT(20, 21, qsgmii)
-		SWITCH_PORT(21, 22, qsgmii)
-		SWITCH_PORT(22, 23, qsgmii)
-		SWITCH_PORT(23, 24, qsgmii)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_panasonic_m16eg-pn28160k.dts b/target/linux/realtek/dts-5.10/rtl8382_panasonic_m16eg-pn28160k.dts
deleted file mode 100644
index c3b29a87ff39..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_panasonic_m16eg-pn28160k.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "panasonic,m16eg-pn28160k", "realtek,rtl8382-soc";
-	model = "Panasonic Switch-M16eG PN28160K";
-
-	aliases {
-		led-boot = &led_status_eco_green;
-		led-failsafe = &led_status_eco_amber;
-		led-running = &led_status_eco_green;
-		led-upgrade = &led_status_eco_green;
-	};
-
-	/*
-	 * sfp0/1 are "combo" port with each TP port (23/24), and they are
-	 * connected to the RTL8218FB. Currently, there is no support for
-	 * the chip and only TP ports work by the RTL8218D support.
-	 */
-	sfp0: sfp-p23 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	};
-
-	sfp1: sfp-p24 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		tx-fault-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		los-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&leds {
-	led_status_eco_amber: led-5 {
-		label = "amber:status_eco";
-		gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		color = <LED_COLOR_ID_AMBER>;
-		function = LED_FUNCTION_STATUS;
-		function-enumerator = <1>;
-	};
-
-	led_status_eco_green: led-6 {
-		label = "green:status_eco";
-		gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_STATUS;
-		function-enumerator = <2>;
-	};
-};
-
-&i2c_gpio_0 {
-	scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&i2c_gpio_1 {
-	scl-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&gpio2 {
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-
-	/*
-	 * GPIO12 (IO1_4): RTL8218FB
-	 *
-	 * This GPIO pin should be specified as "reset-gpio" in mdio node, but
-	 * RTL8218FB phy won't be configured on RTL8218D support in the current
-	 * phy driver. So, ethernet ports on the phy will be broken after hard-
-	 * resetting.
-	 * (RTL8218FB phy will be detected as RTL8218D by the phy driver)
-	 * At the moment, configure this GPIO pin as gpio-hog to avoid breaking
-	 * by resetting.
-	 */
-	ext_switch_reset {
-		gpio-hog;
-		gpios = <12 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "ext-switch-reset";
-	};
-};
-
-&i2c_switch {
-	i2c0: i2c@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-	};
-
-	i2c1: i2c@1 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-	};
-};
-
-&ethernet0 {
-	mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		/* RTL8218FB */
-		EXTERNAL_PHY(16)
-		EXTERNAL_PHY(17)
-		EXTERNAL_PHY(18)
-		EXTERNAL_PHY(19)
-		EXTERNAL_PHY(20)
-		EXTERNAL_PHY(21)
-		EXTERNAL_PHY(22)
-		EXTERNAL_PHY(23)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		SWITCH_PORT(16, 9, qsgmii)
-		SWITCH_PORT(17, 10, qsgmii)
-		SWITCH_PORT(18, 11, qsgmii)
-		SWITCH_PORT(19, 12, qsgmii)
-		SWITCH_PORT(20, 13, qsgmii)
-		SWITCH_PORT(21, 14, qsgmii)
-		SWITCH_PORT(22, 15, qsgmii)
-		SWITCH_PORT(23, 16, qsgmii)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_panasonic_m24eg-pn28240k.dts b/target/linux/realtek/dts-5.10/rtl8382_panasonic_m24eg-pn28240k.dts
deleted file mode 100644
index 1fa9d2cdc7f4..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_panasonic_m24eg-pn28240k.dts
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "panasonic,m24eg-pn28240k", "realtek,rtl8382-soc";
-	model = "Panasonic Switch-M24eG PN28240K";
-
-	aliases {
-		led-boot = &led_status_eco_green;
-		led-failsafe = &led_status_eco_amber;
-		led-running = &led_status_eco_green;
-		led-upgrade = &led_status_eco_green;
-	};
-
-	/*
-	 * sfp0/1 are "combo" port with each TP port (23/24), and they are
-	 * connected to the RTL8218FB. Currently, there is no support for
-	 * the chip and only TP ports work by the RTL8218D support.
-	 */
-	sfp0: sfp-p23 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	};
-
-	sfp1: sfp-p24 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		tx-fault-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		los-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&leds {
-	led_status_eco_amber: led-5 {
-		label = "amber:status_eco";
-		gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		color = <LED_COLOR_ID_AMBER>;
-		function = LED_FUNCTION_STATUS;
-		function-enumerator = <1>;
-	};
-
-	led_status_eco_green: led-6 {
-		label = "green:status_eco";
-		gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_STATUS;
-		function-enumerator = <2>;
-	};
-};
-
-&i2c_gpio_0 {
-	scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&i2c_gpio_1 {
-	scl-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&gpio2 {
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-
-	/*
-	 * GPIO12 (IO1_4): RTL8218B + RTL8218FB
-	 *
-	 * This GPIO pin should be specified as "reset-gpio" in mdio node,
-	 * but the current configuration of RTL8218B phy in the phy driver
-	 * seems to be incomplete and RTL8218FB phy won't be configured on
-	 * RTL8218D support. So, ethernet ports on these phys will be broken
-	 * after hard-resetting.
-	 * (RTL8218FB phy will be detected as RTL8218D by the phy driver)
-	 * At the moment, configure this GPIO pin as gpio-hog to avoid breaking
-	 * by resetting.
-	 */
-	ext_switch_reset {
-		gpio-hog;
-		gpios = <12 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "ext-switch-reset";
-	};
-};
-
-&i2c_switch {
-	i2c0: i2c@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-	};
-
-	i2c1: i2c@1 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-	};
-};
-
-&ethernet0 {
-	mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		EXTERNAL_PHY(0)
-		EXTERNAL_PHY(1)
-		EXTERNAL_PHY(2)
-		EXTERNAL_PHY(3)
-		EXTERNAL_PHY(4)
-		EXTERNAL_PHY(5)
-		EXTERNAL_PHY(6)
-		EXTERNAL_PHY(7)
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		/* RTL8218FB */
-		EXTERNAL_PHY(16)
-		EXTERNAL_PHY(17)
-		EXTERNAL_PHY(18)
-		EXTERNAL_PHY(19)
-		EXTERNAL_PHY(20)
-		EXTERNAL_PHY(21)
-		EXTERNAL_PHY(22)
-		EXTERNAL_PHY(23)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, internal)
-		SWITCH_PORT(9, 10, internal)
-		SWITCH_PORT(10, 11, internal)
-		SWITCH_PORT(11, 12, internal)
-		SWITCH_PORT(12, 13, internal)
-		SWITCH_PORT(13, 14, internal)
-		SWITCH_PORT(14, 15, internal)
-		SWITCH_PORT(15, 16, internal)
-
-		SWITCH_PORT(16, 17, qsgmii)
-		SWITCH_PORT(17, 18, qsgmii)
-		SWITCH_PORT(18, 19, qsgmii)
-		SWITCH_PORT(19, 20, qsgmii)
-		SWITCH_PORT(20, 21, qsgmii)
-		SWITCH_PORT(21, 22, qsgmii)
-		SWITCH_PORT(22, 23, qsgmii)
-		SWITCH_PORT(23, 24, qsgmii)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-16.dts b/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-16.dts
deleted file mode 100644
index ac2eea7015da..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-16.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_zyxel_gs1900.dtsi"
-
-/ {
-	compatible = "zyxel,gs1900-16", "realtek,rtl838x-soc";
-	model = "ZyXEL GS1900-16";
-};
-
-&mdio {
-	EXTERNAL_PHY(16)
-	EXTERNAL_PHY(17)
-	EXTERNAL_PHY(18)
-	EXTERNAL_PHY(19)
-	EXTERNAL_PHY(20)
-	EXTERNAL_PHY(21)
-	EXTERNAL_PHY(22)
-	EXTERNAL_PHY(23)
-};
-
-&switch0 {
-	ports {
-		SWITCH_PORT(16, 9, qsgmii)
-		SWITCH_PORT(17, 10, qsgmii)
-		SWITCH_PORT(18, 11, qsgmii)
-		SWITCH_PORT(19, 12, qsgmii)
-		SWITCH_PORT(20, 13, qsgmii)
-		SWITCH_PORT(21, 14, qsgmii)
-		SWITCH_PORT(22, 15, qsgmii)
-		SWITCH_PORT(23, 16, qsgmii)
-	};
-};
-
-&gpio1 {
-	/delete-node/ poe_enable;
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24-v1.dts b/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24-v1.dts
deleted file mode 100644
index 81482dde1090..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24-v1.dts
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_zyxel_gs1900.dtsi"
-
-/ {
-	compatible = "zyxel,gs1900-24-v1", "realtek,rtl838x-soc";
-	model = "ZyXEL GS1900-24 v1";
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	/* i2c of the left SFP cage: port 25 */
-	i2c0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp0: sfp-p25 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-	};
-
-	/* i2c of the right SFP cage: port 26 */
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp1: sfp-p26 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&mdio {
-	EXTERNAL_PHY(0)
-	EXTERNAL_PHY(1)
-	EXTERNAL_PHY(2)
-	EXTERNAL_PHY(3)
-	EXTERNAL_PHY(4)
-	EXTERNAL_PHY(5)
-	EXTERNAL_PHY(6)
-	EXTERNAL_PHY(7)
-
-	EXTERNAL_PHY(16)
-	EXTERNAL_PHY(17)
-	EXTERNAL_PHY(18)
-	EXTERNAL_PHY(19)
-	EXTERNAL_PHY(20)
-	EXTERNAL_PHY(21)
-	EXTERNAL_PHY(22)
-	EXTERNAL_PHY(23)
-
-	INTERNAL_PHY(24)
-	INTERNAL_PHY(26)
-};
-
-&switch0 {
-	ports {
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, internal)
-		SWITCH_PORT(9, 10, internal)
-		SWITCH_PORT(10, 11, internal)
-		SWITCH_PORT(11, 12, internal)
-		SWITCH_PORT(12, 13, internal)
-		SWITCH_PORT(13, 14, internal)
-		SWITCH_PORT(14, 15, internal)
-		SWITCH_PORT(15, 16, internal)
-
-		SWITCH_PORT(16, 17, qsgmii)
-		SWITCH_PORT(17, 18, qsgmii)
-		SWITCH_PORT(18, 19, qsgmii)
-		SWITCH_PORT(19, 20, qsgmii)
-		SWITCH_PORT(20, 21, qsgmii)
-		SWITCH_PORT(21, 22, qsgmii)
-		SWITCH_PORT(22, 23, qsgmii)
-		SWITCH_PORT(23, 24, qsgmii)
-
-		port@24 {
-			reg = <24>;
-			label = "lan25";
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp0>;
-		};
-
-		port@26 {
-			reg = <26>;
-			label = "lan26";
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp1>;
-		};
-	};
-};
-
-&gpio1 {
-	/delete-node/ poe_enable;
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24e.dts b/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24e.dts
deleted file mode 100644
index 3d00034a3b5d..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24e.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_zyxel_gs1900.dtsi"
-
-/ {
-	compatible = "zyxel,gs1900-24e", "realtek,rtl838x-soc";
-	model = "ZyXEL GS1900-24E";
-};
-
-&mdio {
-	EXTERNAL_PHY(0)
-	EXTERNAL_PHY(1)
-	EXTERNAL_PHY(2)
-	EXTERNAL_PHY(3)
-	EXTERNAL_PHY(4)
-	EXTERNAL_PHY(5)
-	EXTERNAL_PHY(6)
-	EXTERNAL_PHY(7)
-
-	EXTERNAL_PHY(16)
-	EXTERNAL_PHY(17)
-	EXTERNAL_PHY(18)
-	EXTERNAL_PHY(19)
-	EXTERNAL_PHY(20)
-	EXTERNAL_PHY(21)
-	EXTERNAL_PHY(22)
-	EXTERNAL_PHY(23)
-};
-
-&switch0 {
-	ports {
-		SWITCH_PORT(1, 1, qsgmii)
-		SWITCH_PORT(0, 2, qsgmii)
-		SWITCH_PORT(3, 3, qsgmii)
-		SWITCH_PORT(2, 4, qsgmii)
-		SWITCH_PORT(5, 5, qsgmii)
-		SWITCH_PORT(4, 6, qsgmii)
-		SWITCH_PORT(7, 7, qsgmii)
-		SWITCH_PORT(6, 8, qsgmii)
-
-		SWITCH_PORT(9, 9, internal)
-		SWITCH_PORT(8, 10, internal)
-		SWITCH_PORT(11, 11, internal)
-		SWITCH_PORT(10, 12, internal)
-		SWITCH_PORT(13, 13, internal)
-		SWITCH_PORT(12, 14, internal)
-		SWITCH_PORT(15, 15, internal)
-		SWITCH_PORT(14, 16, internal)
-
-		SWITCH_PORT(17, 17, qsgmii)
-		SWITCH_PORT(16, 18, qsgmii)
-		SWITCH_PORT(19, 19, qsgmii)
-		SWITCH_PORT(18, 20, qsgmii)
-		SWITCH_PORT(21, 21, qsgmii)
-		SWITCH_PORT(20, 22, qsgmii)
-		SWITCH_PORT(23, 23, qsgmii)
-		SWITCH_PORT(22, 24, qsgmii)
-	};
-};
-
-&gpio1 {
-	/delete-node/ poe_enable;
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v1.dts b/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v1.dts
deleted file mode 100644
index 7bb3410a318a..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v1.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_zyxel_gs1900.dtsi"
-
-/ {
-	compatible = "zyxel,gs1900-24hp-v1", "realtek,rtl838x-soc";
-	model = "ZyXEL GS1900-24HP v1";
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	/* i2c of the left SFP cage: port 25 */
-	i2c0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp0: sfp-p25 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-	};
-
-	/* i2c of the right SFP cage: port 26 */
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp1: sfp-p26 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&mdio {
-	EXTERNAL_PHY(0)
-	EXTERNAL_PHY(1)
-	EXTERNAL_PHY(2)
-	EXTERNAL_PHY(3)
-	EXTERNAL_PHY(4)
-	EXTERNAL_PHY(5)
-	EXTERNAL_PHY(6)
-	EXTERNAL_PHY(7)
-
-	EXTERNAL_PHY(16)
-	EXTERNAL_PHY(17)
-	EXTERNAL_PHY(18)
-	EXTERNAL_PHY(19)
-	EXTERNAL_PHY(20)
-	EXTERNAL_PHY(21)
-	EXTERNAL_PHY(22)
-	EXTERNAL_PHY(23)
-
-	INTERNAL_PHY(24)
-	INTERNAL_PHY(26)
-};
-
-&switch0 {
-	ports {
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, internal)
-		SWITCH_PORT(9, 10, internal)
-		SWITCH_PORT(10, 11, internal)
-		SWITCH_PORT(11, 12, internal)
-		SWITCH_PORT(12, 13, internal)
-		SWITCH_PORT(13, 14, internal)
-		SWITCH_PORT(14, 15, internal)
-		SWITCH_PORT(15, 16, internal)
-
-		SWITCH_PORT(16, 17, qsgmii)
-		SWITCH_PORT(17, 18, qsgmii)
-		SWITCH_PORT(18, 19, qsgmii)
-		SWITCH_PORT(19, 20, qsgmii)
-		SWITCH_PORT(20, 21, qsgmii)
-		SWITCH_PORT(21, 22, qsgmii)
-		SWITCH_PORT(22, 23, qsgmii)
-		SWITCH_PORT(23, 24, qsgmii)
-
-		port@24 {
-			reg = <24>;
-			label = "lan25";
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp0>;
-		};
-
-		port@26 {
-			reg = <26>;
-			label = "lan26";
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp1>;
-		};
-	};
-};
-
diff --git a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v2.dts b/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v2.dts
deleted file mode 100644
index 7b6a9a1e7fd3..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v2.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_zyxel_gs1900.dtsi"
-
-/ {
-	compatible = "zyxel,gs1900-24hp-v2", "realtek,rtl838x-soc";
-	model = "ZyXEL GS1900-24HP v2 Switch";
-
-	/* i2c of the left SFP cage: port 25 */
-	i2c0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp0: sfp-p25 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-	};
-
-	/* i2c of the right SFP cage: port 26 */
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp1: sfp-p26 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&mdio {
-	EXTERNAL_PHY(0)
-	EXTERNAL_PHY(1)
-	EXTERNAL_PHY(2)
-	EXTERNAL_PHY(3)
-	EXTERNAL_PHY(4)
-	EXTERNAL_PHY(5)
-	EXTERNAL_PHY(6)
-	EXTERNAL_PHY(7)
-
-	EXTERNAL_PHY(16)
-	EXTERNAL_PHY(17)
-	EXTERNAL_PHY(18)
-	EXTERNAL_PHY(19)
-	EXTERNAL_PHY(20)
-	EXTERNAL_PHY(21)
-	EXTERNAL_PHY(22)
-	EXTERNAL_PHY(23)
-
-	INTERNAL_PHY(24)
-	INTERNAL_PHY(26)
-};
-
-&switch0 {
-	ports {
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, internal)
-		SWITCH_PORT(9, 10, internal)
-		SWITCH_PORT(10, 11, internal)
-		SWITCH_PORT(11, 12, internal)
-		SWITCH_PORT(12, 13, internal)
-		SWITCH_PORT(13, 14, internal)
-		SWITCH_PORT(14, 15, internal)
-		SWITCH_PORT(15, 16, internal)
-
-		SWITCH_PORT(16, 17, qsgmii)
-		SWITCH_PORT(17, 18, qsgmii)
-		SWITCH_PORT(18, 19, qsgmii)
-		SWITCH_PORT(19, 20, qsgmii)
-		SWITCH_PORT(20, 21, qsgmii)
-		SWITCH_PORT(21, 22, qsgmii)
-		SWITCH_PORT(22, 23, qsgmii)
-		SWITCH_PORT(23, 24, qsgmii)
-
-
-		port@24 {
-			reg = <24>;
-			label = "lan25";
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp0>;
-		};
-
-		port@26 {
-			reg = <26>;
-			label = "lan26";
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp1>;
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl838x.dtsi b/target/linux/realtek/dts-5.10/rtl838x.dtsi
deleted file mode 100644
index 64e13e1ff37a..000000000000
--- a/target/linux/realtek/dts-5.10/rtl838x.dtsi
+++ /dev/null
@@ -1,287 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/clock/rtl83xx-clk.h>
-
-/dts-v1/;
-
-#define STRINGIZE(s) #s
-#define LAN_LABEL(p, s) STRINGIZE(p ## s)
-#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n)
-
-#define INTERNAL_PHY(n) \
-	phy##n: ethernet-phy@##n { \
-		reg = <##n>; \
-		compatible = "ethernet-phy-ieee802.3-c22"; \
-		phy-is-integrated; \
-	};
-
-#define EXTERNAL_PHY(n) \
-	phy##n: ethernet-phy@##n { \
-		reg = <##n>; \
-		compatible = "ethernet-phy-ieee802.3-c22"; \
-	};
-
-#define EXTERNAL_SFP_PHY(n) \
-	phy##n: ethernet-phy@##n { \
-		compatible = "ethernet-phy-ieee802.3-c22"; \
-		sfp; \
-		media = "fibre"; \
-		reg = <##n>; \
-	};
-
-#define EXTERNAL_SFP_PHY_FULL(n, s) \
-	phy##n: ethernet-phy@##n { \
-		compatible = "ethernet-phy-ieee802.3-c22"; \
-		sfp = <&sfp##s>; \
-		reg = <##n>; \
-	};
-
-#define SWITCH_PORT(n, s, m) \
-	port##n: port@##n { \
-		reg = <##n>; \
-		label = SWITCH_PORT_LABEL(s) ; \
-		phy-handle = <&phy##n>; \
-		phy-mode = #m ; \
-	};
-
-#define SWITCH_SFP_PORT(n, s, m) \
-	port##n: port@##n { \
-		reg = <##n>; \
-		label = SWITCH_PORT_LABEL(s) ; \
-		phy-handle = <&phy##n>; \
-		phy-mode = #m ; \
-		fixed-link { \
-			speed = <1000>; \
-			full-duplex; \
-		}; \
-	};
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	compatible = "realtek,rtl838x-soc";
-
-	osc: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	ccu: clock-controller {
-		compatible = "realtek,rtl8380-clock";
-		#clock-cells = <1>;
-		clocks = <&osc>;
-		clock-names = "ref_clk";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "mips,mips4KEc";
-			reg = <0>;
-			clocks = <&ccu CLK_CPU>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-	};
-
-	cpu_opp_table: opp-table-0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <325000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <350000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <375000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <400000000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <425000000>;
-		};
-		opp05 {
-			opp-hz = /bits/ 64 <450000000>;
-		};
-		opp06 {
-			opp-hz = /bits/ 64 <475000000>;
-		};
-		opp07 {
-			opp-hz = /bits/ 64 <500000000>;
-		};
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	cpuintc: cpuintc {
-		compatible = "mti,cpu-interrupt-controller";
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x18000000 0x10000>;
-
-		intc: interrupt-controller@3000 {
-			compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
-			reg = <0x3000 0x18>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>, <3>, <4>, <5>, <6>;
-		};
-
-		spi0: spi@1200 {
-			compatible = "realtek,rtl8380-spi";
-			reg = <0x1200 0x100>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		timer0: timer@3100 {
-			compatible = "realtek,rtl8380-timer", "realtek,otto-timer";
-			reg = <0x3100 0x10>, <0x3110 0x10>, <0x3120 0x10>,
-			      <0x3130 0x10>, <0x3140 0x10>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <29 4>, <28 4>, <17 4>, <16 4>, <15 4>;
-			clocks = <&ccu CLK_LXB>;
-		};
-
-		uart0: uart@2000 {
-			compatible = "ns16550a";
-			reg = <0x2000 0x100>;
-
-			clocks = <&ccu CLK_LXB>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <31 1>;
-
-			reg-io-width = <1>;
-			reg-shift = <2>;
-			fifo-size = <1>;
-			no-loopback-test;
-		};
-
-		uart1: uart@2100 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&enable_uart1>;
-
-			compatible = "ns16550a";
-			reg = <0x2100 0x100>;
-
-			clocks = <&ccu CLK_LXB>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <30 0>;
-
-			reg-io-width = <1>;
-			reg-shift = <2>;
-			fifo-size = <1>;
-			no-loopback-test;
-
-			status = "disabled";
-		};
-
-		watchdog0: watchdog@3150 {
-			compatible = "realtek,rtl8380-wdt";
-			reg = <0x3150 0xc>;
-
-			realtek,reset-mode = "soc";
-
-			clocks = <&ccu CLK_LXB>;
-			timeout-sec = <30>;
-
-			interrupt-parent = <&intc>;
-			interrupt-names = "phase1", "phase2";
-			interrupts = <19 3>, <18 4>;
-		};
-
-		gpio0: gpio-controller@3500 {
-			compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
-			reg = <0x3500 0x20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpios = <24>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&intc>;
-			interrupts = <23 3>;
-		};
-	};
-
-	pinmux: pinmux@1b001000 {
-		compatible = "pinctrl-single";
-		reg = <0x1b001000 0x4>;
-
-		pinctrl-single,bit-per-mux;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x1>;
-		#pinctrl-cells = <2>;
-
-		enable_uart1: pinmux_enable_uart1 {
-			pinctrl-single,bits = <0x0 0x10 0x10>;
-		};
-	};
-
-	/* LED_GLB_CTRL */
-	pinmux_led: pinmux@1b00a000 {
-		compatible = "pinctrl-single";
-		reg = <0x1b00a000 0x4>;
-
-		pinctrl-single,bit-per-mux;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x1>;
-		#pinctrl-cells = <2>;
-
-		/* enable GPIO 0 */
-		pinmux_disable_sys_led: disable_sys_led {
-			pinctrl-single,bits = <0x0 0x0 0x8000>;
-		};
-	};
-
-	ethernet0: ethernet@1b00a300 {
-		compatible = "realtek,rtl838x-eth";
-		reg = <0x1b00a300 0x100>;
-		interrupt-parent = <&intc>;
-		interrupts = <24 3>;
-		#interrupt-cells = <1>;
-		phy-mode = "internal";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-		};
-	};
-
-	sram0: sram@9f000000 {
-		compatible = "mmio-sram";
-		reg = <0x9f000000 0x10000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x9f000000 0x10000>;
-	};
-
-	switch0: switch@1b000000 {
-		compatible = "realtek,rtl83xx-switch";
-
-		interrupt-parent = <&intc>;
-		interrupts = <20 2>;
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl838x_hpe_1920.dtsi b/target/linux/realtek/dts-5.10/rtl838x_hpe_1920.dtsi
deleted file mode 100644
index 8e29af62bbf4..000000000000
--- a/target/linux/realtek/dts-5.10/rtl838x_hpe_1920.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,38400";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	watchdog1: watchdog {
-		// PT7A7514
-		compatible = "linux,wdt-gpio";
-		gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		hw_algo = "toggle";
-		hw_margin_ms = <1000>;
-		always-running;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_disable_sys_led>;
-	};
-};
-
-&watchdog0 {
-	status = "disabled";
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "bootware_basic";
-				reg = <0x0 0x50000>;
-				read-only;
-			};
-
-			partition@0x60000 {
-				label = "bootware_data";
-				reg = <0x60000 0x30000>;
-				read-only;
-			};
-
-			partition@0x90000 {
-				label = "bootware_extend";
-				reg = <0x90000 0x40000>;
-				read-only;
-			};
-
-			partition@0x100000 {
-				label = "bootware_basic_backup";
-				reg = <0x100000 0x50000>;
-				read-only;
-			};
-
-			partition@0x160000 {
-				label = "bootware_data_backup";
-				reg = <0x160000 0x30000>;
-				read-only;
-			};
-
-			partition@0x190000 {
-				label = "bootware_extend_backup";
-				reg = <0x190000 0x40000>;
-				read-only;
-			};
-
-			partition@0x300000 {
-				label = "firmware";
-				compatible = "h3c,vfs-firmware";
-				reg = <0x300000 0x1cf0000>;
-			};
-
-			partition@0x1ff0000 {
-				label = "factory";
-				reg = <0x1ff0000 0x10000>;
-				read-only;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8393_d-link_dgs-1210-52.dts b/target/linux/realtek/dts-5.10/rtl8393_d-link_dgs-1210-52.dts
deleted file mode 100644
index 5b876e7c431d..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8393_d-link_dgs-1210-52.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl839x.dtsi"
-#include "rtl83xx_d-link_dgs-1210_common.dtsi"
-#include "rtl83xx_d-link_dgs-1210_gpio.dtsi"
-#include "rtl839x_d-link_dgs-1210_gpio.dtsi"
-
-/ {
-	compatible = "d-link,dgs-1210-52", "realtek,rtl8393-soc";
-	model = "D-Link DGS-1210-52";
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* External phy RTL8218B #1 */
-		EXTERNAL_PHY(0)
-		EXTERNAL_PHY(1)
-		EXTERNAL_PHY(2)
-		EXTERNAL_PHY(3)
-		EXTERNAL_PHY(4)
-		EXTERNAL_PHY(5)
-		EXTERNAL_PHY(6)
-		EXTERNAL_PHY(7)
-
-		/* External phy RTL8218B #2 */
-		EXTERNAL_PHY(8)
-		EXTERNAL_PHY(9)
-		EXTERNAL_PHY(10)
-		EXTERNAL_PHY(11)
-		EXTERNAL_PHY(12)
-		EXTERNAL_PHY(13)
-		EXTERNAL_PHY(14)
-		EXTERNAL_PHY(15)
-
-		/* External phy RTL8218B #3 */
-		EXTERNAL_PHY(16)
-		EXTERNAL_PHY(17)
-		EXTERNAL_PHY(18)
-		EXTERNAL_PHY(19)
-		EXTERNAL_PHY(20)
-		EXTERNAL_PHY(21)
-		EXTERNAL_PHY(22)
-		EXTERNAL_PHY(23)
-
-		/* External phy RTL8218B #4 */
-		EXTERNAL_PHY(24)
-		EXTERNAL_PHY(25)
-		EXTERNAL_PHY(26)
-		EXTERNAL_PHY(27)
-		EXTERNAL_PHY(28)
-		EXTERNAL_PHY(29)
-		EXTERNAL_PHY(30)
-		EXTERNAL_PHY(31)
-
-		/* External phy RTL8218B #5 */
-		EXTERNAL_PHY(32)
-		EXTERNAL_PHY(33)
-		EXTERNAL_PHY(34)
-		EXTERNAL_PHY(35)
-		EXTERNAL_PHY(36)
-		EXTERNAL_PHY(37)
-		EXTERNAL_PHY(38)
-		EXTERNAL_PHY(39)
-
-		/* External phy RTL8218B #6 */
-		EXTERNAL_PHY(40)
-		EXTERNAL_PHY(41)
-		EXTERNAL_PHY(42)
-		EXTERNAL_PHY(43)
-		EXTERNAL_PHY(44)
-		EXTERNAL_PHY(45)
-		EXTERNAL_PHY(46)
-		EXTERNAL_PHY(47)
-
-		/* External phy RTL8214FC */
-		EXTERNAL_SFP_PHY_FULL(48, 0)
-		EXTERNAL_SFP_PHY_FULL(49, 1)
-		EXTERNAL_SFP_PHY_FULL(50, 2)
-		EXTERNAL_SFP_PHY_FULL(51, 3)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, qsgmii)
-		SWITCH_PORT(9, 10, qsgmii)
-		SWITCH_PORT(10, 11, qsgmii)
-		SWITCH_PORT(11, 12, qsgmii)
-		SWITCH_PORT(12, 13, qsgmii)
-		SWITCH_PORT(13, 14, qsgmii)
-		SWITCH_PORT(14, 15, qsgmii)
-		SWITCH_PORT(15, 16, qsgmii)
-
-		SWITCH_PORT(16, 17, qsgmii)
-		SWITCH_PORT(17, 18, qsgmii)
-		SWITCH_PORT(18, 19, qsgmii)
-		SWITCH_PORT(19, 20, qsgmii)
-		SWITCH_PORT(20, 21, qsgmii)
-		SWITCH_PORT(21, 22, qsgmii)
-		SWITCH_PORT(22, 23, qsgmii)
-		SWITCH_PORT(23, 24, qsgmii)
-
-		SWITCH_PORT(24, 25, qsgmii)
-		SWITCH_PORT(25, 26, qsgmii)
-		SWITCH_PORT(26, 27, qsgmii)
-		SWITCH_PORT(27, 28, qsgmii)
-		SWITCH_PORT(28, 29, qsgmii)
-		SWITCH_PORT(29, 30, qsgmii)
-		SWITCH_PORT(30, 31, qsgmii)
-		SWITCH_PORT(31, 32, qsgmii)
-
-		SWITCH_PORT(32, 33, qsgmii)
-		SWITCH_PORT(33, 34, qsgmii)
-		SWITCH_PORT(34, 35, qsgmii)
-		SWITCH_PORT(35, 36, qsgmii)
-		SWITCH_PORT(36, 37, qsgmii)
-		SWITCH_PORT(37, 38, qsgmii)
-		SWITCH_PORT(38, 39, qsgmii)
-		SWITCH_PORT(39, 40, qsgmii)
-
-		SWITCH_PORT(40, 41, qsgmii)
-		SWITCH_PORT(41, 42, qsgmii)
-		SWITCH_PORT(42, 43, qsgmii)
-		SWITCH_PORT(43, 44, qsgmii)
-		SWITCH_PORT(44, 45, qsgmii)
-		SWITCH_PORT(45, 46, qsgmii)
-		SWITCH_PORT(46, 47, qsgmii)
-		SWITCH_PORT(47, 48, qsgmii)
-
-		SWITCH_PORT(48, 49, qsgmii)
-		SWITCH_PORT(49, 50, qsgmii)
-		SWITCH_PORT(50, 51, qsgmii)
-		SWITCH_PORT(51, 52, qsgmii)
-
-		/* CPU-Port */
-		port@52 {
-			ethernet = <&ethernet0>;
-			reg = <52>;
-			phy-mode = "qsgmii";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8393_netgear_gs750e.dts b/target/linux/realtek/dts-5.10/rtl8393_netgear_gs750e.dts
deleted file mode 100644
index 750af3e94fa6..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8393_netgear_gs750e.dts
+++ /dev/null
@@ -1,252 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl839x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "netgear,gs750e", "realtek,rtl8393-soc";
-	model = "Netgear GS750E";
-
-	aliases {
-		label-mac-device = &ethernet0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-	};
-
-	virtual_flash {
-		compatible = "mtd-concat";
-
-		devices = <&fwconcat0>, <&fwconcat1>, <&fwconcat2>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "firmware";
-				reg = <0x0 0x760000>;
-				compatible = "openwrt,uimage", "denx,uimage";
-				openwrt,ih-magic = <0x174e4741>;
-			};
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "u-boot-env";
-				reg = <0x80000 0x10000>;
-				read-only;
-			};
-
-			partition@90000 {
-				label = "u-boot-env2";
-				reg = <0x90000 0x10000>;
-				read-only;
-			};
-
-			fwconcat1: partition@a0000 {
-				label = "jffs2_cfg";
-				reg = <0xa0000 0x80000>;
-			};
-
-			fwconcat2: partition@120000 {
-				label = "jffs2_log";
-				reg = <0x120000 0x80000>;
-			};
-
-			fwconcat0: partition@1a0000 {
-				label = "runtime";
-				reg = <0x1a0000 0x660000>;
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-
-		/* External phy RTL8218B #1 */
-		EXTERNAL_PHY(0)
-		EXTERNAL_PHY(1)
-		EXTERNAL_PHY(2)
-		EXTERNAL_PHY(3)
-		EXTERNAL_PHY(4)
-		EXTERNAL_PHY(5)
-		EXTERNAL_PHY(6)
-		EXTERNAL_PHY(7)
-
-		/* External phy RTL8218B #2 */
-		EXTERNAL_PHY(8)
-		EXTERNAL_PHY(9)
-		EXTERNAL_PHY(10)
-		EXTERNAL_PHY(11)
-		EXTERNAL_PHY(12)
-		EXTERNAL_PHY(13)
-		EXTERNAL_PHY(14)
-		EXTERNAL_PHY(15)
-
-		/* External phy RTL8218B #3 */
-		EXTERNAL_PHY(16)
-		EXTERNAL_PHY(17)
-		EXTERNAL_PHY(18)
-		EXTERNAL_PHY(19)
-		EXTERNAL_PHY(20)
-		EXTERNAL_PHY(21)
-		EXTERNAL_PHY(22)
-		EXTERNAL_PHY(23)
-
-		/* External phy RTL8218B #4 */
-		EXTERNAL_PHY(24)
-		EXTERNAL_PHY(25)
-		EXTERNAL_PHY(26)
-		EXTERNAL_PHY(27)
-		EXTERNAL_PHY(28)
-		EXTERNAL_PHY(29)
-		EXTERNAL_PHY(30)
-		EXTERNAL_PHY(31)
-
-		/* External phy RTL8218B #5 */
-		EXTERNAL_PHY(32)
-		EXTERNAL_PHY(33)
-		EXTERNAL_PHY(34)
-		EXTERNAL_PHY(35)
-		EXTERNAL_PHY(36)
-		EXTERNAL_PHY(37)
-		EXTERNAL_PHY(38)
-		EXTERNAL_PHY(39)
-
-		/* External phy RTL8218B #6 */
-		EXTERNAL_PHY(40)
-		EXTERNAL_PHY(41)
-		EXTERNAL_PHY(42)
-		EXTERNAL_PHY(43)
-		EXTERNAL_PHY(44)
-		EXTERNAL_PHY(45)
-		EXTERNAL_PHY(46)
-		EXTERNAL_PHY(47)
-
-		/* RTL8393 Internal SerDes */
-		INTERNAL_PHY(48)
-		INTERNAL_PHY(49)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, qsgmii)
-		SWITCH_PORT(9, 0, qsgmii)
-		SWITCH_PORT(10, 11, qsgmii)
-		SWITCH_PORT(11, 12, qsgmii)
-		SWITCH_PORT(12, 13, qsgmii)
-		SWITCH_PORT(13, 14, qsgmii)
-		SWITCH_PORT(14, 15, qsgmii)
-		SWITCH_PORT(15, 16, qsgmii)
-
-		SWITCH_PORT(16, 17, qsgmii)
-		SWITCH_PORT(17, 18, qsgmii)
-		SWITCH_PORT(18, 19, qsgmii)
-		SWITCH_PORT(19, 20, qsgmii)
-		SWITCH_PORT(20, 21, qsgmii)
-		SWITCH_PORT(21, 22, qsgmii)
-		SWITCH_PORT(22, 23, qsgmii)
-		SWITCH_PORT(23, 24, qsgmii)
-
-		SWITCH_PORT(24, 25, qsgmii)
-		SWITCH_PORT(25, 26, qsgmii)
-		SWITCH_PORT(26, 27, qsgmii)
-		SWITCH_PORT(27, 28, qsgmii)
-		SWITCH_PORT(28, 29, qsgmii)
-		SWITCH_PORT(29, 30, qsgmii)
-		SWITCH_PORT(30, 31, qsgmii)
-		SWITCH_PORT(31, 32, qsgmii)
-
-		SWITCH_PORT(32, 33, qsgmii)
-		SWITCH_PORT(33, 34, qsgmii)
-		SWITCH_PORT(34, 35, qsgmii)
-		SWITCH_PORT(35, 36, qsgmii)
-		SWITCH_PORT(36, 37, qsgmii)
-		SWITCH_PORT(37, 38, qsgmii)
-		SWITCH_PORT(38, 39, qsgmii)
-		SWITCH_PORT(39, 40, qsgmii)
-
-		SWITCH_PORT(40, 41, qsgmii)
-		SWITCH_PORT(41, 42, qsgmii)
-		SWITCH_PORT(42, 43, qsgmii)
-		SWITCH_PORT(43, 44, qsgmii)
-		SWITCH_PORT(44, 45, qsgmii)
-		SWITCH_PORT(45, 46, qsgmii)
-		SWITCH_PORT(46, 47, qsgmii)
-		SWITCH_PORT(47, 48, qsgmii)
-
-		/* SFP cages */
-		SWITCH_SFP_PORT(48, 49, sgmii)
-		SWITCH_SFP_PORT(49, 50, sgmii)
-
-		/* CPU-Port */
-		port@52 {
-			ethernet = <&ethernet0>;
-			reg = <52>;
-			phy-mode = "qsgmii";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8393_panasonic_m48eg-pn28480k.dts b/target/linux/realtek/dts-5.10/rtl8393_panasonic_m48eg-pn28480k.dts
deleted file mode 100644
index 6a7eb6eb8137..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8393_panasonic_m48eg-pn28480k.dts
+++ /dev/null
@@ -1,380 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl839x.dtsi"
-#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "panasonic,m48eg-pn28480k", "realtek,rtl8393-soc";
-	model = "Panasonic Switch-M48eG PN28480K";
-
-	aliases {
-		led-boot = &led_status_eco_green;
-		led-failsafe = &led_status_eco_amber;
-		led-running = &led_status_eco_green;
-		led-upgrade = &led_status_eco_green;
-	};
-
-	fan: gpio-fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
-		/* the actual speeds (rpm) are unknown, just use dummy values */
-		gpio-fan,speed-map = <1 0>, <2 1>;
-		#cooling-cells = <2>;
-	};
-
-	/*
-	 * sfp0/1/2/3 are "combo" port with each TP port (45/46/47/48),
-	 * and they are connected to the RTL8218FB. Currently, there is
-	 * no support for the chip and only TP ports work by the RTL8218B
-	 * support.
-	 */
-	sfp0: sfp-p45 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	};
-
-	sfp1: sfp-p46 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		tx-fault-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		los-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	sfp2: sfp-p47 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c2>;
-		tx-fault-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		los-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	sfp3: sfp-p48 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c3>;
-		tx-fault-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		los-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-	};
-
-	thermal-zones {
-		/*
-		 * Zone for SoC temperature
-		 *
-		 * Fan speed:
-		 *
-		 * -  0-44 celsius: Low
-		 * - 45-54 celsius: High
-		 */
-		cpu-thermal {
-			polling-delay-passive = <1000>;
-			polling-delay = <2000>;
-
-			thermal-sensors = <&tsens_soc>;
-
-			trips {
-				cpu_alert: trip-point {
-					temperature = <45000>;
-					hysteresis = <4000>;
-					type = "active";
-				};
-
-				cpu_crit {
-					temperature = <55000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map {
-					trip = <&cpu_alert>;
-					cooling-device = <&fan 0 1>;
-				};
-			};
-		};
-
-		 /*
-		 * Zone for system temperature
-		 *
-		 * Fan speed:
-		 *
-		 * -  0-39 celsius: Low
-		 * - 40-49 celsius: High
-		 *
-		 * Note: official recommended ranges of temperature on each
-		 *       fan speed setting:
-		 *
-		 *       - Low speed : 0-40 celsius
-		 *       - High speed: 0-50 celsius
-		 *
-		 *       (stock firmware doesn't support auto-selection of
-		 *        speed and need to be selected manually by user)
-		 */
-		sys-thermal {
-			polling-delay-passive = <1000>;
-			polling-delay = <2000>;
-
-			thermal-sensors = <&tsens_sys>;
-
-			trips {
-				sys_alert: trip-point {
-					temperature = <40000>;
-					hysteresis = <4000>;
-					type = "active";
-				};
-
-				sys_crit {
-					temperature = <50000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map {
-					trip = <&sys_alert>;
-					cooling-device = <&fan 0 1>;
-				};
-			};
-		};
-	};
-};
-
-&leds {
-	led_status_eco_amber: led-5 {
-		label = "amber:status_eco";
-		gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_AMBER>;
-		function = LED_FUNCTION_STATUS;
-		function-enumerator = <1>;
-	};
-
-	led_status_eco_green: led-6 {
-		label = "green:status_eco";
-		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_STATUS;
-		function-enumerator = <2>;
-	};
-};
-
-&i2c_gpio_0 {
-	scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio0 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* Microchip TCN75A (for SoC) */
-	tsens_soc: sensor@48 {
-		compatible = "microchip,tcn75";
-		reg = <0x48>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	/* Microchip TCN75A (for System) */
-	tsens_sys: sensor@49 {
-		compatible = "microchip,tcn75";
-		reg = <0x49>;
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&i2c_gpio_1 {
-	scl-gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&gpio2 {
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
-
-	/*
-	 * GPIO12 (IO1_4): 5x RTL8218B + RTL8218FB
-	 *
-	 * This GPIO pin should be specified as "reset-gpio" in mdio node,
-	 * but the current configuration of RTL8218B phy in the phy driver
-	 * seems to be incomplete and RTL8218FB phy won't be configured on
-	 * RTL8218D support. So, ethernet ports on these phys will be broken
-	 * after hard-resetting.
-	 * (RTL8218FB phy will be detected as RTL8218D by the phy driver)
-	 * At the moment, configure this GPIO pin as gpio-hog to avoid breaking
-	 * by resetting.
-	 */
-	ext_switch_reset {
-		gpio-hog;
-		gpios = <12 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "ext-switch-reset";
-	};
-};
-
-&i2c_switch {
-	i2c0: i2c@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-	};
-
-	i2c1: i2c@1 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-	};
-
-	i2c2: i2c@2 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <2>;
-	};
-
-	i2c3: i2c@3 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <3>;
-	};
-};
-
-&ethernet0 {
-	mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		EXTERNAL_PHY(0)
-		EXTERNAL_PHY(1)
-		EXTERNAL_PHY(2)
-		EXTERNAL_PHY(3)
-		EXTERNAL_PHY(4)
-		EXTERNAL_PHY(5)
-		EXTERNAL_PHY(6)
-		EXTERNAL_PHY(7)
-
-		EXTERNAL_PHY(8)
-		EXTERNAL_PHY(9)
-		EXTERNAL_PHY(10)
-		EXTERNAL_PHY(11)
-		EXTERNAL_PHY(12)
-		EXTERNAL_PHY(13)
-		EXTERNAL_PHY(14)
-		EXTERNAL_PHY(15)
-
-		EXTERNAL_PHY(16)
-		EXTERNAL_PHY(17)
-		EXTERNAL_PHY(18)
-		EXTERNAL_PHY(19)
-		EXTERNAL_PHY(20)
-		EXTERNAL_PHY(21)
-		EXTERNAL_PHY(22)
-		EXTERNAL_PHY(23)
-
-		EXTERNAL_PHY(24)
-		EXTERNAL_PHY(25)
-		EXTERNAL_PHY(26)
-		EXTERNAL_PHY(27)
-		EXTERNAL_PHY(28)
-		EXTERNAL_PHY(29)
-		EXTERNAL_PHY(30)
-		EXTERNAL_PHY(31)
-
-		EXTERNAL_PHY(32)
-		EXTERNAL_PHY(33)
-		EXTERNAL_PHY(34)
-		EXTERNAL_PHY(35)
-		EXTERNAL_PHY(36)
-		EXTERNAL_PHY(37)
-		EXTERNAL_PHY(38)
-		EXTERNAL_PHY(39)
-
-		/* RTL8218FB */
-		EXTERNAL_PHY(40)
-		EXTERNAL_PHY(41)
-		EXTERNAL_PHY(42)
-		EXTERNAL_PHY(43)
-		EXTERNAL_PHY(44)
-		EXTERNAL_PHY(45)
-		EXTERNAL_PHY(46)
-		EXTERNAL_PHY(47)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(0, 1, qsgmii)
-		SWITCH_PORT(1, 2, qsgmii)
-		SWITCH_PORT(2, 3, qsgmii)
-		SWITCH_PORT(3, 4, qsgmii)
-		SWITCH_PORT(4, 5, qsgmii)
-		SWITCH_PORT(5, 6, qsgmii)
-		SWITCH_PORT(6, 7, qsgmii)
-		SWITCH_PORT(7, 8, qsgmii)
-
-		SWITCH_PORT(8, 9, qsgmii)
-		SWITCH_PORT(9, 10, qsgmii)
-		SWITCH_PORT(10, 11, qsgmii)
-		SWITCH_PORT(11, 12, qsgmii)
-		SWITCH_PORT(12, 13, qsgmii)
-		SWITCH_PORT(13, 14, qsgmii)
-		SWITCH_PORT(14, 15, qsgmii)
-		SWITCH_PORT(15, 16, qsgmii)
-
-		SWITCH_PORT(16, 17, qsgmii)
-		SWITCH_PORT(17, 18, qsgmii)
-		SWITCH_PORT(18, 19, qsgmii)
-		SWITCH_PORT(19, 20, qsgmii)
-		SWITCH_PORT(20, 21, qsgmii)
-		SWITCH_PORT(21, 22, qsgmii)
-		SWITCH_PORT(22, 23, qsgmii)
-		SWITCH_PORT(23, 24, qsgmii)
-
-		SWITCH_PORT(24, 25, qsgmii)
-		SWITCH_PORT(25, 26, qsgmii)
-		SWITCH_PORT(26, 27, qsgmii)
-		SWITCH_PORT(27, 28, qsgmii)
-		SWITCH_PORT(28, 29, qsgmii)
-		SWITCH_PORT(29, 30, qsgmii)
-		SWITCH_PORT(30, 31, qsgmii)
-		SWITCH_PORT(31, 32, qsgmii)
-
-		SWITCH_PORT(32, 33, qsgmii)
-		SWITCH_PORT(33, 34, qsgmii)
-		SWITCH_PORT(34, 35, qsgmii)
-		SWITCH_PORT(35, 36, qsgmii)
-		SWITCH_PORT(36, 37, qsgmii)
-		SWITCH_PORT(37, 38, qsgmii)
-		SWITCH_PORT(38, 39, qsgmii)
-		SWITCH_PORT(39, 40, qsgmii)
-
-		SWITCH_PORT(40, 41, qsgmii)
-		SWITCH_PORT(41, 42, qsgmii)
-		SWITCH_PORT(42, 43, qsgmii)
-		SWITCH_PORT(43, 44, qsgmii)
-		SWITCH_PORT(44, 45, qsgmii)
-		SWITCH_PORT(45, 46, qsgmii)
-		SWITCH_PORT(46, 47, qsgmii)
-		SWITCH_PORT(47, 48, qsgmii)
-
-		port@52 {
-			ethernet = <&ethernet0>;
-			reg = <52>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts b/target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts
deleted file mode 100644
index b7300cfcbee8..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts
+++ /dev/null
@@ -1,422 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl839x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	compatible = "tplink,sg2452p-v4", "realtek,rtl8393-soc";
-	model = "TP-Link SG2452P v4";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	aliases {
-		led-boot = &led_sys;
-		led-failsafe = &led_sys;
-		led-running = &led_sys;
-		led-upgrade = &led_sys;
-		label-mac-device = &ethernet0;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,38400";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		speed {
-			label = "speed";
-			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-	};
-
-	gpio_fan_sys {
-		compatible = "gpio-fan";
-		alarm-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-	};
-
-	gpio_fan_psu_1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&disable_jtag>;
-		compatible = "gpio-fan";
-
-		alarm-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-		/* the actual speeds (rpm) are unknown, just use dummy values */
-		gpio-fan,speed-map = <1 0>, <2 1>;
-		#cooling-cells = <2>;
-	};
-
-	gpio_fan_psu_2 {
-		/* This fan runs in parallel to PSU1 fan, but has a separate
-		 * alarm GPIO. This is not (yet) supported by the gpio-fan driver,
-		 * so a separate instance is added
-		 */
-		compatible = "gpio-fan";
-		alarm-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		compatible = "gpio-leds";
-
-		led-0 {
-			label = "green:speed";
-			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-		};
-
-		led-1 {
-			label = "green:poe";
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-		};
-
-		led_sys: led-2 {
-			label = "green:sys";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_STATUS;
-		};
-
-		led-3 {
-			label = "green:fan";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_STATUS;
-		};
-
-		led-4 {
-			label = "amber:fan";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_AMBER>;
-			function = "fault-fan";
-		};
-
-		led-5 {
-			label = "green:poe-max";
-			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = "alarm-poe";
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* LAN9 - LAN12 */
-		tps23861@5 {
-			compatible = "ti,tps23861";
-			reg = <0x05>;
-		};
-
-		/* LAN17 - LAN20 */
-		tps23861@6 {
-			compatible = "ti,tps23861";
-			reg = <0x06>;
-		};
-
-		/* LAN45 - LAN48 */
-		tps23861@9 {
-			compatible = "ti,tps23861";
-			reg = <0x09>;
-		};
-
-		/* LAN37 - LAN40 */
-		tps23861@a {
-			compatible = "ti,tps23861";
-			reg = <0x0a>;
-		};
-
-		/* LAN1 - LAN4 */
-		tps23861@14 {
-			compatible = "ti,tps23861";
-			reg = <0x14>;
-		};
-
-		/* LAN25 - LAN28 */
-		tps23861@24 {
-			compatible = "ti,tps23861";
-			reg = <0x24>;
-		};
-
-		/* LAN33 - LAN 36 */
-		tps23861@25 {
-			compatible = "ti,tps23861";
-			reg = <0x25>;
-		};
-
-		/* LAN41 - LAN44 */
-		tps23861@26 {
-			compatible = "ti,tps23861";
-			reg = <0x26>;
-		};
-
-		/* LAN13 - LAN16 */
-		tps23861@29 {
-			compatible = "ti,tps23861";
-			reg = <0x29>;
-		};
-
-		/* LAN29 - LAN32 */
-		tps23861@2c {
-			compatible = "ti,tps23861";
-			reg = <0x2c>;
-		};
-
-		/* LAN5 - LAN8 */
-		tps23861@48 {
-			compatible = "ti,tps23861";
-			reg = <0x48>;
-		};
-
-		/* LAN21 - LAN24 */
-		tps23861@49 {
-			compatible = "ti,tps23861";
-			reg = <0x49>;
-		};
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&gpio0 {
-	poe-enable {
-		gpio-hog;
-		gpios = <23 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "poe-enable";
-	};
-};
-
-&spi0 {
-	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0xe0000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "u-boot-env";
-				reg = <0xe0000 0x20000>;
-			};
-
-			/* We use the "sys", "usrimg1" and "usrimg2" partitions
-			 *  as firmware since the kernel needs to be in "sys", but the
-			 *  partition is too small to hold the "rootfs" as well.
-			 *  The original partition map contains:
-			 *
-			 *   partition@100000 {
-			 *       label = "sys";
-			 *       reg = <0x100000 0x600000>;
-			 *   };
-			 *   partition@700000 {
-			 *       label = "usrimg1";
-			 *       reg = <0x700000 0xa00000>;
-			 *   };
-			 *   partition@1100000 {
-			 *       label = "usrimg2";
-			 *       reg = <0x1100000 0xa00000>;
-			 *   };
-			 */
-
-			partition@100000 {
-				label = "firmware";
-				reg = <0x100000 0x1a00000>;
-			};
-			partition@1b00000 {
-				label = "usrappfs";
-				reg = <0x1b00000 0x400000>;
-			};
-			partition@1f00000 {
-				compatible = "nvmem-cells";
-				label = "para";
-				reg = <0x1f00000 0x100000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				read-only;
-
-				factory_macaddr: macaddr@fdff4 {
-					reg = <0xfdff4 0x6>;
-				};
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	nvmem-cells = <&factory_macaddr>;
-	nvmem-cell-names = "mac-address";
-
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* External phy RTL8218B #1 */
-		EXTERNAL_PHY(0)
-		EXTERNAL_PHY(1)
-		EXTERNAL_PHY(2)
-		EXTERNAL_PHY(3)
-		EXTERNAL_PHY(4)
-		EXTERNAL_PHY(5)
-		EXTERNAL_PHY(6)
-		EXTERNAL_PHY(7)
-
-		/* External phy RTL8218B #2 */
-		EXTERNAL_PHY(8)
-		EXTERNAL_PHY(9)
-		EXTERNAL_PHY(10)
-		EXTERNAL_PHY(11)
-		EXTERNAL_PHY(12)
-		EXTERNAL_PHY(13)
-		EXTERNAL_PHY(14)
-		EXTERNAL_PHY(15)
-
-		/* External phy RTL8218B #3 */
-		EXTERNAL_PHY(16)
-		EXTERNAL_PHY(17)
-		EXTERNAL_PHY(18)
-		EXTERNAL_PHY(19)
-		EXTERNAL_PHY(20)
-		EXTERNAL_PHY(21)
-		EXTERNAL_PHY(22)
-		EXTERNAL_PHY(23)
-
-		/* External phy RTL8218B #4 */
-		EXTERNAL_PHY(24)
-		EXTERNAL_PHY(25)
-		EXTERNAL_PHY(26)
-		EXTERNAL_PHY(27)
-		EXTERNAL_PHY(28)
-		EXTERNAL_PHY(29)
-		EXTERNAL_PHY(30)
-		EXTERNAL_PHY(31)
-
-		/* External phy RTL8218B #5 */
-		EXTERNAL_PHY(32)
-		EXTERNAL_PHY(33)
-		EXTERNAL_PHY(34)
-		EXTERNAL_PHY(35)
-		EXTERNAL_PHY(36)
-		EXTERNAL_PHY(37)
-		EXTERNAL_PHY(38)
-		EXTERNAL_PHY(39)
-
-		/* External phy RTL8218B #6 */
-		EXTERNAL_PHY(40)
-		EXTERNAL_PHY(41)
-		EXTERNAL_PHY(42)
-		EXTERNAL_PHY(43)
-		EXTERNAL_PHY(44)
-		EXTERNAL_PHY(45)
-		EXTERNAL_PHY(46)
-		EXTERNAL_PHY(47)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(0, 01, qsgmii)
-		SWITCH_PORT(1, 02, qsgmii)
-		SWITCH_PORT(2, 03, qsgmii)
-		SWITCH_PORT(3, 04, qsgmii)
-		SWITCH_PORT(4, 05, qsgmii)
-		SWITCH_PORT(5, 06, qsgmii)
-		SWITCH_PORT(6, 07, qsgmii)
-		SWITCH_PORT(7, 08, qsgmii)
-
-		SWITCH_PORT(8, 09, qsgmii)
-		SWITCH_PORT(9, 10, qsgmii)
-		SWITCH_PORT(10, 11, qsgmii)
-		SWITCH_PORT(11, 12, qsgmii)
-		SWITCH_PORT(12, 13, qsgmii)
-		SWITCH_PORT(13, 14, qsgmii)
-		SWITCH_PORT(14, 15, qsgmii)
-		SWITCH_PORT(15, 16, qsgmii)
-
-		SWITCH_PORT(16, 17, qsgmii)
-		SWITCH_PORT(17, 18, qsgmii)
-		SWITCH_PORT(18, 19, qsgmii)
-		SWITCH_PORT(19, 20, qsgmii)
-		SWITCH_PORT(20, 21, qsgmii)
-		SWITCH_PORT(21, 22, qsgmii)
-		SWITCH_PORT(22, 23, qsgmii)
-		SWITCH_PORT(23, 24, qsgmii)
-
-		SWITCH_PORT(24, 25, qsgmii)
-		SWITCH_PORT(25, 26, qsgmii)
-		SWITCH_PORT(26, 27, qsgmii)
-		SWITCH_PORT(27, 28, qsgmii)
-		SWITCH_PORT(28, 29, qsgmii)
-		SWITCH_PORT(29, 30, qsgmii)
-		SWITCH_PORT(30, 31, qsgmii)
-		SWITCH_PORT(31, 32, qsgmii)
-
-		SWITCH_PORT(32, 33, qsgmii)
-		SWITCH_PORT(33, 34, qsgmii)
-		SWITCH_PORT(34, 35, qsgmii)
-		SWITCH_PORT(35, 36, qsgmii)
-		SWITCH_PORT(36, 37, qsgmii)
-		SWITCH_PORT(37, 38, qsgmii)
-		SWITCH_PORT(38, 39, qsgmii)
-		SWITCH_PORT(39, 40, qsgmii)
-
-		SWITCH_PORT(40, 41, qsgmii)
-		SWITCH_PORT(41, 42, qsgmii)
-		SWITCH_PORT(42, 43, qsgmii)
-		SWITCH_PORT(43, 44, qsgmii)
-		SWITCH_PORT(44, 45, qsgmii)
-		SWITCH_PORT(45, 46, qsgmii)
-		SWITCH_PORT(46, 47, qsgmii)
-		SWITCH_PORT(47, 48, qsgmii)
-
-		/* CPU-Port */
-		port@52 {
-			ethernet = <&ethernet0>;
-			reg = <52>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl8393_zyxel_gs1900-48.dts b/target/linux/realtek/dts-5.10/rtl8393_zyxel_gs1900-48.dts
deleted file mode 100644
index c7ddd8313a32..000000000000
--- a/target/linux/realtek/dts-5.10/rtl8393_zyxel_gs1900-48.dts
+++ /dev/null
@@ -1,320 +0,0 @@
-/dts-v1/;
-
-#include "rtl839x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "zyxel,gs1900-48", "realtek,rtl8393-soc";
-	model = "Zyxel GS1900-48";
-
-	aliases {
-		led-boot = &led_sys;
-		led-failsafe = &led_sys;
-		led-running = &led_sys;
-		led-upgrade = &led_sys;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_disable_sys_led>;
-		compatible = "gpio-leds";
-
-		led_sys: sys {
-			label = "green:sys";
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		indirect-access-bus-id = <3>;
-		gpio-controller;
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		mode {
-			label = "reset";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	/* i2c of the left SFP cage: port 49 */
-	i2c0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp0: sfp-p9 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-	};
-
-	/* i2c of the right SFP cage: port 50 */
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp1: sfp-p10 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "u-boot-env";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-			partition@50000 {
-				label = "u-boot-env2";
-				reg = <0x50000 0x10000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "jffs";
-				reg = <0x60000 0x100000>;
-			};
-			partition@160000 {
-				label = "jffs2";
-				reg = <0x160000 0x100000>;
-			};
-			partition@260000 {
-				label = "firmware";
-				reg = <0x260000 0x6d0000>;
-				compatible = "openwrt,uimage", "denx,uimage";
-				openwrt,ih-magic = <0x83800000>;
-			};
-			partition@930000 {
-				label = "runtime2";
-				reg = <0x930000 0x6d0000>;
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* External phy RTL8218B #1 */
-		EXTERNAL_PHY(0)
-		EXTERNAL_PHY(1)
-		EXTERNAL_PHY(2)
-		EXTERNAL_PHY(3)
-		EXTERNAL_PHY(4)
-		EXTERNAL_PHY(5)
-		EXTERNAL_PHY(6)
-		EXTERNAL_PHY(7)
-
-		/* External phy RTL8218B #2 */
-		EXTERNAL_PHY(8)
-		EXTERNAL_PHY(9)
-		EXTERNAL_PHY(10)
-		EXTERNAL_PHY(11)
-		EXTERNAL_PHY(12)
-		EXTERNAL_PHY(13)
-		EXTERNAL_PHY(14)
-		EXTERNAL_PHY(15)
-
-		/* External phy RTL8218B #3 */
-		EXTERNAL_PHY(16)
-		EXTERNAL_PHY(17)
-		EXTERNAL_PHY(18)
-		EXTERNAL_PHY(19)
-		EXTERNAL_PHY(20)
-		EXTERNAL_PHY(21)
-		EXTERNAL_PHY(22)
-		EXTERNAL_PHY(23)
-
-		/* External phy RTL8218B #4 */
-		EXTERNAL_PHY(24)
-		EXTERNAL_PHY(25)
-		EXTERNAL_PHY(26)
-		EXTERNAL_PHY(27)
-		EXTERNAL_PHY(28)
-		EXTERNAL_PHY(29)
-		EXTERNAL_PHY(30)
-		EXTERNAL_PHY(31)
-
-		/* External phy RTL8218B #5 */
-		EXTERNAL_PHY(32)
-		EXTERNAL_PHY(33)
-		EXTERNAL_PHY(34)
-		EXTERNAL_PHY(35)
-		EXTERNAL_PHY(36)
-		EXTERNAL_PHY(37)
-		EXTERNAL_PHY(38)
-		EXTERNAL_PHY(39)
-
-		/* External phy RTL8218B #6 */
-		EXTERNAL_PHY(40)
-		EXTERNAL_PHY(41)
-		EXTERNAL_PHY(42)
-		EXTERNAL_PHY(43)
-		EXTERNAL_PHY(44)
-		EXTERNAL_PHY(45)
-		EXTERNAL_PHY(46)
-		EXTERNAL_PHY(47)
-
-		/* RTL8393 Internal SerDes */
-		INTERNAL_PHY(48)
-		INTERNAL_PHY(49)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(0, 01, qsgmii)
-		SWITCH_PORT(1, 02, qsgmii)
-		SWITCH_PORT(2, 03, qsgmii)
-		SWITCH_PORT(3, 04, qsgmii)
-		SWITCH_PORT(4, 05, qsgmii)
-		SWITCH_PORT(5, 06, qsgmii)
-		SWITCH_PORT(6, 07, qsgmii)
-		SWITCH_PORT(7, 08, qsgmii)
-
-		SWITCH_PORT(8, 09, qsgmii)
-		SWITCH_PORT(9, 10, qsgmii)
-		SWITCH_PORT(10, 11, qsgmii)
-		SWITCH_PORT(11, 12, qsgmii)
-		SWITCH_PORT(12, 13, qsgmii)
-		SWITCH_PORT(13, 14, qsgmii)
-		SWITCH_PORT(14, 15, qsgmii)
-		SWITCH_PORT(15, 16, qsgmii)
-
-		SWITCH_PORT(16, 17, qsgmii)
-		SWITCH_PORT(17, 18, qsgmii)
-		SWITCH_PORT(18, 19, qsgmii)
-		SWITCH_PORT(19, 20, qsgmii)
-		SWITCH_PORT(20, 21, qsgmii)
-		SWITCH_PORT(21, 22, qsgmii)
-		SWITCH_PORT(22, 23, qsgmii)
-		SWITCH_PORT(23, 24, qsgmii)
-
-		SWITCH_PORT(24, 25, qsgmii)
-		SWITCH_PORT(25, 26, qsgmii)
-		SWITCH_PORT(26, 27, qsgmii)
-		SWITCH_PORT(27, 28, qsgmii)
-		SWITCH_PORT(28, 29, qsgmii)
-		SWITCH_PORT(29, 30, qsgmii)
-		SWITCH_PORT(30, 31, qsgmii)
-		SWITCH_PORT(31, 32, qsgmii)
-
-		SWITCH_PORT(32, 33, qsgmii)
-		SWITCH_PORT(33, 34, qsgmii)
-		SWITCH_PORT(34, 35, qsgmii)
-		SWITCH_PORT(35, 36, qsgmii)
-		SWITCH_PORT(36, 37, qsgmii)
-		SWITCH_PORT(37, 38, qsgmii)
-		SWITCH_PORT(38, 39, qsgmii)
-		SWITCH_PORT(39, 40, qsgmii)
-
-		SWITCH_PORT(40, 41, qsgmii)
-		SWITCH_PORT(41, 42, qsgmii)
-		SWITCH_PORT(42, 43, qsgmii)
-		SWITCH_PORT(43, 44, qsgmii)
-		SWITCH_PORT(44, 45, qsgmii)
-		SWITCH_PORT(45, 46, qsgmii)
-		SWITCH_PORT(46, 47, qsgmii)
-		SWITCH_PORT(47, 48, qsgmii)
-
-		/* SFP cages */
-		port@48 {
-			reg = <48>;
-			label = "lan49";
-			phy-mode = "sgmii";
-			phy-handle = <&phy48>;
-			sfp = <&sfp0>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-				pause;
-			};
-
-		};
-
-		port@49 {
-			reg = <49>;
-			label = "lan50";
-			phy-mode = "sgmii";
-			phy-handle = <&phy49>;
-			sfp = <&sfp1>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-				pause;
-			};
-
-		};
-
-		/* CPU-Port */
-		port@52 {
-			ethernet = <&ethernet0>;
-			reg = <52>;
-			phy-mode = "qsgmii";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl839x.dtsi b/target/linux/realtek/dts-5.10/rtl839x.dtsi
deleted file mode 100644
index 91d6e17a9ea1..000000000000
--- a/target/linux/realtek/dts-5.10/rtl839x.dtsi
+++ /dev/null
@@ -1,319 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/clock/rtl83xx-clk.h>
-
-/dts-v1/;
-
-#define STRINGIZE(s) #s
-#define LAN_LABEL(p, s) STRINGIZE(p ## s)
-#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n)
-
-#define INTERNAL_PHY(n) \
-	phy##n: ethernet-phy@##n { \
-		reg = <##n>; \
-		compatible = "ethernet-phy-ieee802.3-c22"; \
-		phy-is-integrated; \
-	};
-
-#define EXTERNAL_PHY(n) \
-	phy##n: ethernet-phy@##n { \
-		reg = <##n>; \
-		compatible = "ethernet-phy-ieee802.3-c22"; \
-	};
-
-#define EXTERNAL_SFP_PHY(n) \
-	phy##n: ethernet-phy@##n { \
-		compatible = "ethernet-phy-ieee802.3-c22"; \
-		sfp; \
-		media = "fibre"; \
-		reg = <##n>; \
-	};
-
-#define EXTERNAL_SFP_PHY_FULL(n, s) \
-	phy##n: ethernet-phy@##n { \
-		compatible = "ethernet-phy-ieee802.3-c22"; \
-		sfp = <&sfp##s>; \
-		reg = <##n>; \
-	};
-
-#define SWITCH_PORT(n, s, m) \
-	port@##n { \
-		reg = <##n>; \
-		label = SWITCH_PORT_LABEL(s) ; \
-		phy-handle = <&phy##n>; \
-		phy-mode = #m ; \
-	};
-
-#define SWITCH_SFP_PORT(n, s, m) \
-	port@##n { \
-		reg = <##n>; \
-		label = SWITCH_PORT_LABEL(s) ; \
-		phy-handle = <&phy##n>; \
-		phy-mode = #m ; \
-		fixed-link { \
-			speed = <1000>; \
-			full-duplex; \
-		}; \
-	};
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	compatible = "realtek,rtl839x-soc";
-
-	osc: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	ccu: clock-controller {
-		compatible = "realtek,rtl8390-clock";
-		#clock-cells = <1>;
-		clocks = <&osc>;
-		clock-names = "ref_clk";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "mips,mips34Kc";
-			reg = <0>;
-			clocks = <&ccu CLK_CPU>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-
-		cpu@1 {
-			compatible = "mips,mips34Kc";
-			reg = <1>;
-			clocks = <&ccu CLK_CPU>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-	};
-
-	cpu_opp_table: opp-table-0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <425000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <450000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <475000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <500000000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <525000000>;
-		};
-		opp05 {
-			opp-hz = /bits/ 64 <550000000>;
-		};
-		opp06 {
-			opp-hz = /bits/ 64 <575000000>;
-		};
-		opp07 {
-			opp-hz = /bits/ 64 <600000000>;
-		};
-		opp08 {
-			opp-hz = /bits/ 64 <625000000>;
-		};
-		opp09 {
-			opp-hz = /bits/ 64 <650000000>;
-		};
-		opp10 {
-			opp-hz = /bits/ 64 <675000000>;
-		};
-		opp11 {
-			opp-hz = /bits/ 64 <700000000>;
-		};
-		opp12 {
-			opp-hz = /bits/ 64 <725000000>;
-		};
-		opp13 {
-			opp-hz = /bits/ 64 <750000000>;
-		};
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	cpuintc: cpuintc {
-		compatible = "mti,cpu-interrupt-controller";
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x18000000 0x10000>;
-
-		intc: interrupt-controller@3000 {
-			compatible = "realtek,rtl8390-intc", "realtek,rtl-intc";
-			reg = <0x3000 0x18>, <0x3018 0x18>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>, <3>, <4>, <5>, <6>;
-		};
-
-		spi0: spi@1200 {
-			compatible = "realtek,rtl8380-spi";
-			reg = <0x1200 0x100>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		timer0: timer@3100 {
-			compatible = "realtek,rtl8390-timer", "realtek,otto-timer";
-			reg = <0x3100 0x10>, <0x3110 0x10>, <0x3120 0x10>,
-			      <0x3130 0x10>, <0x3140 0x10>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <29 4>, <28 4>, <17 4>, <16 4>, <15 4>;
-			clocks = <&ccu CLK_LXB>;
-		};
-
-		uart0: uart@2000 {
-			compatible = "ns16550a";
-			reg = <0x2000 0x100>;
-
-			clocks = <&ccu CLK_LXB>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <31 1>;
-
-			reg-io-width = <1>;
-			reg-shift = <2>;
-			fifo-size = <1>;
-			no-loopback-test;
-		};
-
-		uart1: uart@2100 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&enable_uart1>;
-
-			compatible = "ns16550a";
-			reg = <0x2100 0x100>;
-
-			clocks = <&ccu CLK_LXB>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <30 2>;
-
-			reg-io-width = <1>;
-			reg-shift = <2>;
-			fifo-size = <1>;
-			no-loopback-test;
-
-			status = "disabled";
-		};
-
-		gpio0: gpio-controller@3500 {
-			compatible = "realtek,rtl8390-gpio", "realtek,otto-gpio";
-			reg = <0x3500 0x20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpios = <24>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&intc>;
-			interrupts = <23 2>;
-		};
-
-		watchdog0: watchdog@3150 {
-			compatible = "realtek,rtl8390-wdt";
-			reg = <0x3150 0xc>;
-
-			realtek,reset-mode = "soc";
-
-			clocks = <&ccu CLK_LXB>;
-			timeout-sec = <30>;
-
-			interrupt-parent = <&intc>;
-			interrupt-names = "phase1", "phase2";
-			interrupts = <19 4>, <18 4>;
-		};
-
-	};
-
-	pinmux@1b000004 {
-		compatible = "pinctrl-single";
-		reg = <0x1b000004 0x4>;
-
-		pinctrl-single,bit-per-mux;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x1>;
-		#pinctrl-cells = <2>;
-
-		enable_uart1: pinmux_enable_uart1 {
-			pinctrl-single,bits = <0x0 0x1 0x3>;
-		};
-
-		disable_jtag: pinmux_disable_jtag {
-			pinctrl-single,bits = <0x0 0x2 0x3>;
-		};
-	};
-
-	/* LED_GLB_CTRL */
-	pinmux@1b0000e4 {
-		compatible = "pinctrl-single";
-		reg = <0x1b0000e4 0x4>;
-
-		pinctrl-single,bit-per-mux;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x1>;
-		#pinctrl-cells = <2>;
-
-		/* enable GPIO 0 */
-		pinmux_disable_sys_led: disable_sys_led {
-			pinctrl-single,bits = <0x0 0x0 0x4000>;
-		};
-	};
-
-	ethernet0: ethernet@1b00a300 {
-		compatible = "realtek,rtl838x-eth";
-		reg = <0x1b00a300 0x100>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <24 3>;
-
-		phy-mode = "internal";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-		};
-	};
-
-	sram0: sram@9f000000 {
-		compatible = "mmio-sram";
-		reg = <0x9f000000 0x18000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x9f000000 0x18000>;
-	};
-
-	switch0: switch@1b000000 {
-		status = "okay";
-		compatible = "realtek,rtl83xx-switch";
-
-		interrupt-parent = <&intc>;
-		interrupts = <20 2>;
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl839x_d-link_dgs-1210_gpio.dtsi b/target/linux/realtek/dts-5.10/rtl839x_d-link_dgs-1210_gpio.dtsi
deleted file mode 100644
index 260ab67ef3e0..000000000000
--- a/target/linux/realtek/dts-5.10/rtl839x_d-link_dgs-1210_gpio.dtsi
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/ {
-	/* Lan 49 */
-	i2c0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp0: sfp-p49 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		/* tx-disable-gpio handled by RTL8214FC based on media setting */
-	};
-
-	/* Lan 50 */
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp1: sfp-p50 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		/* tx-disable-gpio handled by RTL8214FC based on media setting */
-	};
-
-	/* Lan 51 */
-	i2c2: i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp2: sfp-p51 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c2>;
-		los-gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 24 GPIO_ACTIVE_LOW>;
-		/* tx-disable-gpio handled by RTL8214FC based on media setting */
-	};
-
-	/* Lan 52 */
-	i2c3: i2c-gpio-3 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp3: sfp-p52 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c3>;
-		los-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		/* tx-disable-gpio handled by RTL8214FC based on media setting */
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl83xx_d-link_dgs-1210_common.dtsi b/target/linux/realtek/dts-5.10/rtl83xx_d-link_dgs-1210_common.dtsi
deleted file mode 100644
index 1e3cafa9381d..000000000000
--- a/target/linux/realtek/dts-5.10/rtl83xx_d-link_dgs-1210_common.dtsi
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	leds: leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_disable_sys_led>;
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "green:power";
-			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gpio0 {
-	indirect-access-bus-id = <0>;
-};
-
-&spi0 {
-	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000000 0x80000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "u-boot-env";
-				reg = <0x00080000 0x40000>;
-			};
-			partition@c0000 {
-				label = "board-name";
-				reg = <0x000c0000 0x40000>;
-			};
-			partition@280000 {
-				label = "firmware";
-				compatible = "denx,uimage";
-				reg = <0x00100000 0xd80000>;
-			};
-			partition@be80000 {
-				label = "kernel2";
-				reg = <0x00e80000 0x180000>;
-			};
-			partition@1000000 {
-				label = "sysinfo";
-				reg = <0x01000000 0x40000>;
-			};
-			partition@1040000 {
-				label = "rootfs2";
-				reg = <0x01040000 0xc00000>;
-			};
-			partition@1c40000 {
-				label = "jffs2";
-				reg = <0x01c40000 0x3c0000>;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl83xx_d-link_dgs-1210_gpio.dtsi b/target/linux/realtek/dts-5.10/rtl83xx_d-link_dgs-1210_gpio.dtsi
deleted file mode 100644
index b1477aa18214..000000000000
--- a/target/linux/realtek/dts-5.10/rtl83xx_d-link_dgs-1210_gpio.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/ {
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio1 34 GPIO_ACTIVE_LOW>;
-		open-source;
-	};
-
-	keys: keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio1 33 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <0>;
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi b/target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi
deleted file mode 100644
index fb2aa18d218a..000000000000
--- a/target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi
+++ /dev/null
@@ -1,196 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,9600";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			label = "amber:any_col";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_AMBER>;
-			function = LED_FUNCTION_FAULT;
-		};
-
-		led-1 {
-			label = "green:giga";
-			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <1>;
-		};
-
-		led-2 {
-			label = "green:100m";
-			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <2>;
-		};
-
-		led-3 {
-			label = "green:full";
-			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <3>;
-		};
-
-		led-4 {
-			label = "green:loop_history";
-			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <4>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		led_mode {
-			label = "led-mode";
-			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-	};
-
-	i2c_gpio_0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio1: gpio@20 {
-			compatible = "nxp,pca9555";
-			reg = <0x20>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio2: gpio@75 {
-			compatible = "nxp,pca9539";
-			reg = <0x75>;
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			/*
-			 * GPIO14 (IO1_6): Shift Register RESET (port LED)
-			 * - Switch-M8eG  PN28080K:  3x 74HC164
-			 * - Switch-M16eG PN28160K:  4x 74HC164
-			 * - Switch-M24eG PN28240K:  6x 74HC164
-			 * - Switch-M48eG PN28480K: 12x 74HC164
-			 */
-			portled_sregister_reset {
-				gpio-hog;
-				gpios = <14 GPIO_ACTIVE_HIGH>;
-				output-high;
-				line-name = "portled-sregister-reset";
-			};
-		};
-	};
-
-	i2c_gpio_1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c_switch: i2c-switch@70 {
-			compatible = "nxp,pca9545";
-			reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
-			reg = <0x70>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "u-boot-env";
-				reg = <0x80000 0x10000>;
-			};
-
-			partition@90000 {
-				label = "u-boot-env2";
-				reg = <0x90000 0x10000>;
-			};
-
-			partition@a0000 {
-				label = "sysinfo";
-				reg = <0xa0000 0x60000>;
-				read-only;
-			};
-
-			/*
-			 * Filesystem area in stock firmware
-			 * (0x100000-0x1DFFFFF)
-			 *
-			 * stock firmware images are required to pass
-			 * the checking by the U-Boot, also for OpenWrt
-			 *
-			 * in OpenWrt:
-			 * - 0x100000-0xDFFFFF (13M): stock images
-			 * - 0xE00000-0x1DFFFFF(16M): OpenWrt image
-			 */
-			partition@100000 {
-				label = "fs_reserved";
-				reg = <0x100000 0xd00000>;
-			};
-
-			partition@e00000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0xe00000 0x1000000>;
-			};
-
-			partition@1e00000 {
-				label = "vlog_data";
-				reg = <0x1e00000 0x100000>;
-				read-only;
-			};
-
-			partition@1f00000 {
-				label = "elog_data";
-				reg = <0x1f00000 0x100000>;
-				read-only;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl9302_zyxel_xgs1250-12.dts b/target/linux/realtek/dts-5.10/rtl9302_zyxel_xgs1250-12.dts
deleted file mode 100644
index a57fc00c6e9f..000000000000
--- a/target/linux/realtek/dts-5.10/rtl9302_zyxel_xgs1250-12.dts
+++ /dev/null
@@ -1,324 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/dts-v1/;
-
-#include "rtl930x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	compatible = "zyxel,xgs1250-12", "realtek,rtl838x-soc";
-	model = "Zyxel XGS1250-12 Switch";
-
-	aliases {
-		led-boot = &led_pwr_sys;
-		led-failsafe = &led_pwr_sys;
-		led-running = &led_pwr_sys;
-		led-upgrade = &led_pwr_sys;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		mode {
-			label = "reset";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	/* i2c of the SFP cage: port 12 */
-	i2c0: i2c-rtl9300 {
-		compatible = "realtek,rtl9300-i2c";
-		reg = <0x1b00036c 0x3c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		sda-pin = <10>;
-		scl-pin = <8>;
-		clock-frequency = <100000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_disable_sys_led>;
-
-		led_pwr_sys: led-0 {
-			label = "green:power";
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	sfp0: sfp-p12 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-	};
-
-	led_set: led_set@0 {
-		compatible = "realtek,rtl9300-leds";
-		led_set0 = <0x0000 0xffff 0x0a20 0x0b80>; // LED set 0: 1000Mbps,  10/100Mbps
-		led_set1 = <0x0a0b 0x0a28 0x0a82 0x0a0b>; // LED set 1: (10G, 5G, 2.5G) (2.5G, 1G)
-							  // (5G, 10/100) (10G, 5G, 2.5G)
-		led_set2 = <0x0000 0xffff 0x0a20 0x0a01>; // LED set 2: 1000MBit, 10GBit
-	};
-};
-
-&spi0 {
-	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0xe0000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "u-boot-env";
-				reg = <0xe0000 0x10000>;
-			};
-			partition@f0000 {
-				label = "u-boot-env2";
-				reg = <0xf0000 0x10000>;
-				read-only;
-			};
-			partition@100000 {
-				label = "jffs";
-				reg = <0x100000 0x100000>;
-			};
-			partition@200000 {
-				label = "jffs2";
-				reg = <0x200000 0x100000>;
-			};
-			partition@b300000 {
-				label = "firmware";
-				reg = <0x300000 0xce0000>;
-				compatible = "openwrt,uimage", "denx,uimage";
-				openwrt,ih-magic = <0x93001250>;
-			};
-			partition@fe0000 {
-				label = "log";
-				reg = <0xfe0000 0x20000>;
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* External RTL8218D PHY */
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			rtl9300,smi-address = <0 0>;
-			sds = < 2 >;
-			// Disabled because we do not know how to bring up again
-			// reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			rtl9300,smi-address = <0 1>;
-		};
-		phy2: ethernet-phy@2 {
-			reg = <2>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			rtl9300,smi-address = <0 2>;
-		};
-		phy3: ethernet-phy@3 {
-			reg = <3>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			rtl9300,smi-address = <0 3>;
-		};
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			rtl9300,smi-address = <0 4>;
-		};
-		phy5: ethernet-phy@5 {
-			reg = <5>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			rtl9300,smi-address = <0 5>;
-		};
-		phy6: ethernet-phy@6 {
-			reg = <6>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			rtl9300,smi-address = <0 6>;
-		};
-		phy7: ethernet-phy@7 {
-			reg = <7>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			rtl9300,smi-address = <0 7>;
-		};
-
-		/* External Aquantia 113C PHYs */
-		phy24: ethernet-phy@24 {
-			reg = <24>;
-			compatible = "ethernet-phy-ieee802.3-c45";
-			rtl9300,smi-address = <1 8>;
-			sds = < 6 >;
-			// Disabled because we do not know how to bring up again
-			// reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-
-		phy25: ethernet-phy@25 {
-			reg = <25>;
-			compatible = "ethernet-phy-ieee802.3-c45";
-			rtl9300,smi-address = <2 8>;
-			sds = < 7 >;
-			// Disabled because we do not know how to bring up again
-			// reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-
-		phy26: ethernet-phy@26 {
-			reg = <26>;
-			compatible = "ethernet-phy-ieee802.3-c45";
-			rtl9300,smi-address = <3 8>;
-			sds = < 8 >;
-			// Disabled because we do not know how to bring up again
-			// reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-
-		/* SFP Ports */
-		phy27: ethernet-phy@27 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-			reg = <27>;
-			rtl9300,smi-address = <4 0>;
-			sds = < 9 >;
-		};
-
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			label = "lan1";
-			phy-handle = <&phy0>;
-			phy-mode = "xgmii";
-			led-set = <0>;
-		};
-		port@1 {
-			reg = <1>;
-			label = "lan2";
-			phy-handle = <&phy1>;
-			phy-mode = "xgmii";
-			led-set = <0>;
-		};
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-			phy-handle = <&phy2>;
-			phy-mode = "xgmii";
-			led-set = <0>;
-		};
-		port@3 {
-			reg = <3>;
-			label = "lan4";
-			phy-handle = <&phy3>;
-			phy-mode = "xgmii";
-			led-set = <0>;
-		};
-		port@4 {
-			reg = <4>;
-			label = "lan5";
-			phy-handle = <&phy4>;
-			phy-mode = "xgmii";
-			led-set = <0>;
-		};
-		port@5 {
-			reg = <5>;
-			label = "lan6";
-			phy-handle = <&phy5>;
-			phy-mode = "xgmii";
-			led-set = <0>;
-		};
-		port@6 {
-			reg = <6>;
-			label = "lan7";
-			phy-handle = <&phy6>;
-			phy-mode = "xgmii";
-			led-set = <0>;
-		};
-		port@7 {
-			reg = <7>;
-			label = "lan8";
-			phy-handle = <&phy7>;
-			phy-mode = "xgmii";
-			led-set = <0>;
-		};
-
-		port@24 {
-			reg = <24>;
-			label = "lan9";
-			phy-mode = "usxgmii";
-			phy-handle = <&phy24>;
-			led-set = <1>;
-		};
-		port@25 {
-			reg = <25>;
-			label = "lan10";
-			phy-mode = "usxgmii";
-			phy-handle = <&phy25>;
-			led-set = <1>;
-		};
-		port@26 {
-			reg = <26>;
-			label = "lan11";
-			phy-mode = "usxgmii";
-			phy-handle = <&phy26>;
-			led-set = <1>;
-		};
-
-		port@27 {
-			reg = <27>;
-			label = "lan12";
-			phy-mode = "10gbase-r";
-			phy-handle = <&phy27>;
-			sfp = <&sfp0>;
-			led-set = <2>;
-
-			fixed-link {
-				speed = <10000>;
-				full-duplex;
-				pause;
-			};
-
-		};
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <10000>;
-				full-duplex;
-			};
-		};
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl930x.dtsi b/target/linux/realtek/dts-5.10/rtl930x.dtsi
deleted file mode 100644
index c2a992a174c7..000000000000
--- a/target/linux/realtek/dts-5.10/rtl930x.dtsi
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	compatible = "realtek,rtl838x-soc";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		frequency = <800000000>;
-
-		cpu@0 {
-			compatible = "mips,mips34Kc";
-			reg = <0>;
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	cpuintc: cpuintc {
-		compatible = "mti,cpu-interrupt-controller";
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-	};
-
-	lx_clk: lx_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency  = <175000000>;
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x18000000 0x10000>;
-
-		intc: interrupt-controller@3000 {
-			compatible = "realtek,rtl9300-intc", "realtek,rtl-intc";
-			reg = <0x3000 0x18>, <0x3018 0x18>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>, <3>, <4>, <5>, <6>, <7>;
-		};
-
-		rtl9300clock: rtl9300clock@3200 {
-			compatible = "realtek,rtl9300clock";
-			reg = <0x3200 0x10>, <0x3210 0x10>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <7 5>, <8 5>;
-		};
-
-		spi0: spi@1200 {
-			compatible = "realtek,rtl8380-spi";
-			reg = <0x1200 0x100>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		uart0: uart@2000 {
-			compatible = "ns16550a";
-			reg = <0x2000 0x100>;
-
-			clocks = <&lx_clk>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <30 1>;
-
-			reg-io-width = <1>;
-			reg-shift = <2>;
-			fifo-size = <1>;
-			no-loopback-test;
-		};
-
-		uart1: uart@2100 {
-			compatible = "ns16550a";
-			reg = <0x2100 0x100>;
-
-			clocks = <&lx_clk>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <31 0>;
-
-			reg-io-width = <1>;
-			reg-shift = <2>;
-			fifo-size = <1>;
-			no-loopback-test;
-
-			status = "disabled";
-		};
-
-		watchdog0: watchdog@3260 {
-			compatible = "realtek,rtl9300-wdt";
-			reg = <0x3260 0xc>;
-
-			realtek,reset-mode = "soc";
-
-			clocks = <&lx_clk>;
-			timeout-sec = <30>;
-
-			interrupt-parent = <&intc>;
-			interrupt-names = "phase1", "phase2";
-			interrupts = <5 4>, <6 4>;
-		};
-
-		gpio0: gpio-controller@3300 {
-			compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
-			reg = <0x3300 0x1c>, <0x3338 0x8>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpios = <24>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&intc>;
-			interrupts = <13 1>;
-		};
-
-	};
-
-	pinmux_led: pinmux@1b00cc00 {
-		compatible = "pinctrl-single";
-		reg = <0x1b00cc00 0x4>;
-
-		pinctrl-single,bit-per-mux;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x1>;
-		#pinctrl-cells = <2>;
-
-		/* enable GPIO 0 */
-		pinmux_disable_sys_led: disable_sys_led {
-			pinctrl-single,bits = <0x0 0x0 0x1000>;
-		};
-	};
-
-	ethernet0: ethernet@1b00a300 {
-		compatible = "realtek,rtl838x-eth";
-		reg = <0x1b00a300 0x100>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <24 3>;
-
-		phy-mode = "internal";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-		};
-	};
-
-	switch0: switch@1b000000 {
-		compatible = "realtek,rtl83xx-switch";
-		status = "okay";
-
-		interrupt-parent = <&intc>;
-		interrupts = <23 2>;
-	};
-};
diff --git a/target/linux/realtek/dts-5.10/rtl931x.dtsi b/target/linux/realtek/dts-5.10/rtl931x.dtsi
deleted file mode 100644
index fd932c8be1b0..000000000000
--- a/target/linux/realtek/dts-5.10/rtl931x.dtsi
+++ /dev/null
@@ -1,200 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/interrupt-controller/mips-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	compatible = "realtek,rtl838x-soc";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		frequency = <1000000000>;
-
-		cpu@0 {
-			compatible = "mti,interaptive";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "mti,interaptive";
-			reg = <1>;
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	lx_clk: lx_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <200000000>;
-	};
-
-	cpuclock: cpuclock@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-
-		/* FIXME: there should be way to detect this */
-		clock-frequency = <1000000000>;
-	};
-
-	cpuintc: cpuintc {
-		compatible = "mti,cpu-interrupt-controller";
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-	};
-
-	gic: interrupt-controller@1ddc0000 {
-		compatible = "mti,gic";
-		reg = <0x1ddc0000 0x20000>;
-
-		interrupt-controller;
-		#interrupt-cells = <3>;
-
-		/*
-		 * Declare the interrupt-parent even though the mti,gic
-		 * binding doesn't require it, such that the kernel can
-		 * figure out that cpu_intc is the root interrupt
-		 * controller & should be probed first.
-		 */
-		interrupt-parent = <&cpuintc>;
-
-		timer {
-			compatible = "mti,gic-timer";
-			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
-			clocks = <&cpuclock>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x18000000 0x10000>;
-
-		spi0: spi@1200 {
-			status = "okay";
-
-			compatible = "realtek,rtl8380-spi";
-			reg = <0x1200 0x100>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		watchdog0: watchdog@3260 {
-			compatible = "realtek,rtl9310-wdt";
-			reg = <0x3260 0xc>;
-
-			realtek,reset-mode = "soc";
-
-			clocks = <&lx_clk>;
-			timeout-sec = <30>;
-
-			interrupt-parent = <&gic>;
-			interrupt-names = "phase1", "phase2";
-			interrupts = <GIC_SHARED 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SHARED 9 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		gpio0: gpio-controller@3300 {
-			compatible = "realtek,rtl9310-gpio", "realtek,otto-gpio";
-			reg = <0x3300 0x1c>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpios = <32>;
-
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		uart0: uart@2000 {
-			compatible = "ns16550a";
-			reg = <0x2000 0x100>;
-
-			clock-frequency = <200000000>;
-
-			interrupt-parent = <&gic>;
-			#interrupt-cells = <3>;
-			interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>;
-
-			reg-io-width = <1>;
-			reg-shift = <2>;
-			fifo-size = <1>;
-			no-loopback-test;
-		};
-
-		uart1: uart@2100 {
-			compatible = "ns16550a";
-			reg = <0x2100 0x100>;
-
-			clock-frequency = <200000000>;
-
-			interrupt-parent = <&gic>;
-			#interrupt-cells = <3>;
-			interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
-
-			reg-io-width = <1>;
-			reg-shift = <2>;
-			fifo-size = <1>;
-			no-loopback-test;
-
-			status = "disabled";
-		};
-	};
-
-	pinmux: pinmux@1b001358 {
-		compatible = "pinctrl-single";
-		reg = <0x1b001358 0x4>;
-
-		pinctrl-single,bit-per-mux;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x1>;
-		#pinctrl-cells = <2>;
-
-		/* Enable GPIO6 and GPIO7, possibly unknown others */
-		pinmux_disable_jtag: disable_jtag {
-			pinctrl-single,bits = <0x0 0x0 0x8000>;
-		};
-
-		/* Controls GPIO0 */
-		pinmux_disable_sys_led: disable_sys_led {
-			pinctrl-single,bits = <0x0 0x0 0x100>;
-		};
-	};
-
-	ethernet0: ethernet@1b00a300 {
-		status = "okay";
-		compatible = "realtek,rtl838x-eth";
-		reg = <0x1b00a300 0x100>;
-		interrupt-parent = <&gic>;
-		#interrupt-cells = <3>;
-		interrupts = <GIC_SHARED 16 IRQ_TYPE_LEVEL_HIGH>;
-		phy-mode = "internal";
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-		};
-	};
-
-	switch0: switch@1b000000 {
-		compatible = "realtek,rtl83xx-switch";
-		status = "okay";
-
-		interrupt-parent = <&gic>;
-		#interrupt-cells = <3>;
-		interrupts = <GIC_SHARED 15 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
diff --git a/target/linux/realtek/files-5.10/Documentation/devicetree/bindings/realtek,otto-timer.yaml b/target/linux/realtek/files-5.10/Documentation/devicetree/bindings/realtek,otto-timer.yaml
deleted file mode 100644
index b508362a728d..000000000000
--- a/target/linux/realtek/files-5.10/Documentation/devicetree/bindings/realtek,otto-timer.yaml
+++ /dev/null
@@ -1,85 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/timer/realtek,rtl8300-timer.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Realtek Timer Device Tree Bindings
-
-maintainers:
-  - Markus Stockhausen <markus.stockhausen@gmx.de>
-
-description: |
-  The Realtek SOCs of the RTL83XX and RTL93XX series have at least 5 known
-  timers with corresponding interrupt lines . Their speed is derived from the
-  Lexra Bus (LXB) by dividers. Each timer has a block of 4 control registers in
-  the address range 0xb800xxxx with following start offsets.
-
-  RTL83XX: 0x3100, 0x3110, 0x3120, 0x3130, 0x3140
-  RTL93XX: 0x3200, 0x3210, 0x3220, 0x3230, 0x3240
- 
-properties:
-  compatible:
-    items:
-      - enum:
-        - realtek,rtl8380-timer
-        - realtek,rtl8390-timer
-        - realtek,rtl9300-timer
-      - const: realtek,otto-timer
-
-  reg:
-    minItems: 5
-    maxItems: 5
-    description:
-      List of timer register addresses.
-
-  interrupts:
-    minItems: 5
-    maxItems: 5
-    description:
-      List of timer interrupts.
-
-  clocks:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - interrupts
-  - clocks
-
-additionalProperties: false
-
-examples:
-  - |
-    timer0: timer@3100 {
-      compatible = "realtek,rtl8380-timer", "realtek,otto-timer";
-      reg = <0x3100 0x10>, <0x3110 0x10>, <0x3120 0x10>,
-            <0x3130 0x10>, <0x3140 0x10>;
-
-      interrupt-parent = <&intc>;
-      interrupts = <29 4>, <28 4>, <17 4>, <16 4>, <15 4>;
-      clocks = <&ccu CLK_LXB>;
-    };
-  - |
-    timer0: timer@3100 {
-      compatible = "realtek,rtl8390-timer", "realtek,otto-timer";
-      reg = <0x3100 0x10>, <0x3110 0x10>, <0x3120 0x10>,
-            <0x3130 0x10>, <0x3140 0x10>;
-
-      interrupt-parent = <&intc>;
-      interrupts = <29 4>, <28 4>, <17 4>, <16 4>, <15 4>;
-      clocks = <&ccu CLK_LXB>;
-    };
-  - |
-    timer0: timer@3200 {
-      compatible = "realtek,rtl9300-timer", "realtek,otto-timer";
-      reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>,
-            <0x3230 0x10>, <0x3240 0x10>;
-
-      interrupt-parent = <&intc>;
-      interrupts = <7 4>, <8 4>, <9 4>, <10 4>, <11 4>;
-      clocks = <&ccu CLK_LXB>;
-    };
-
-...
diff --git a/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/ioremap.h b/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/ioremap.h
deleted file mode 100644
index c49a09579233..000000000000
--- a/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/ioremap.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#ifndef RTL838X_IOREMAP_H_
-#define RTL838X_IOREMAP_H_
-
-static inline int is_rtl838x_internal_registers(phys_addr_t offset)
-{
-	/* IO-Block */
-	if (offset >= 0xb8000000 && offset < 0xb9000000)
-		return 1;
-	/* Switch block */
-	if (offset >= 0xbb000000 && offset < 0xbc000000)
-		return 1;
-	return 0;
-}
-
-static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
-					 unsigned long flags)
-{
-	if (is_rtl838x_internal_registers(offset))
-		return (void __iomem *)offset;
-	return NULL;
-}
-
-static inline int plat_iounmap(const volatile void __iomem *addr)
-{
-	return is_rtl838x_internal_registers((unsigned long)addr);
-}
-
-#endif
diff --git a/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h b/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h
deleted file mode 100644
index d95e5fb09873..000000000000
--- a/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2006-2012 Tony Wu (tonywu@realtek.com)
- * Copyright (C) 2020 B. Koblitz
- */
-#ifndef _MACH_RTL838X_H_
-#define _MACH_RTL838X_H_
-
-#include <asm/types.h>
-/*
- * Register access macros
- */
-
-#define RTL838X_SW_BASE		((volatile void *) 0xBB000000)
-
-#define rtl83xx_r32(reg)	readl(reg)
-#define rtl83xx_w32(val, reg)	writel(val, reg)
-#define rtl83xx_w32_mask(clear, set, reg) rtl83xx_w32((rtl83xx_r32(reg) & ~(clear)) | (set), reg)
-
-#define rtl83xx_r8(reg)		readb(reg)
-#define rtl83xx_w8(val, reg)	writeb(val, reg)
-
-#define sw_r32(reg)		readl(RTL838X_SW_BASE + reg)
-#define sw_w32(val, reg)	writel(val, RTL838X_SW_BASE + reg)
-#define sw_w32_mask(clear, set, reg)	\
-				sw_w32((sw_r32(reg) & ~(clear)) | (set), reg)
-#define sw_r64(reg)		((((u64)readl(RTL838X_SW_BASE + reg)) << 32) | \
-				readl(RTL838X_SW_BASE + reg + 4))
-
-#define sw_w64(val, reg)	do { \
-					writel((u32)((val) >> 32), RTL838X_SW_BASE + reg); \
-					writel((u32)((val) & 0xffffffff), \
-							RTL838X_SW_BASE + reg + 4); \
-				} while (0)
-
-/*
- * SPRAM
- */
-#define RTL838X_ISPRAM_BASE	0x0
-#define RTL838X_DSPRAM_BASE	0x0
-
-/*
- * IRQ Controller
- */
-#define RTL838X_IRQ_CPU_BASE	0
-#define RTL838X_IRQ_CPU_NUM	8
-#define RTL838X_IRQ_ICTL_BASE	(RTL838X_IRQ_CPU_BASE + RTL838X_IRQ_CPU_NUM)
-#define RTL838X_IRQ_ICTL_NUM	32
-
-#define RTL83XX_IRQ_UART0		31
-#define RTL83XX_IRQ_UART1		30
-#define RTL83XX_IRQ_TC0			29
-#define RTL83XX_IRQ_TC1			28
-#define RTL83XX_IRQ_OCPTO		27
-#define RTL83XX_IRQ_HLXTO		26
-#define RTL83XX_IRQ_SLXTO		25
-#define RTL83XX_IRQ_NIC			24
-#define RTL83XX_IRQ_GPIO_ABCD		23
-#define RTL83XX_IRQ_GPIO_EFGH		22
-#define RTL83XX_IRQ_RTC			21
-#define RTL83XX_IRQ_SWCORE		20
-#define RTL83XX_IRQ_WDT_IP1		19
-#define RTL83XX_IRQ_WDT_IP2		18
-
-#define RTL9300_UART1_IRQ		31
-#define RTL9300_UART0_IRQ		30
-#define RTL9300_USB_H2_IRQ		28
-#define RTL9300_NIC_IRQ			24
-#define RTL9300_SWCORE_IRQ		23
-#define RTL9300_GPIO_ABC_IRQ		13
-#define RTL9300_TC4_IRQ			11
-#define RTL9300_TC3_IRQ			10
-#define RTL9300_TC2_IRQ			 9
-#define RTL9300_TC1_IRQ			 8
-#define RTL9300_TC0_IRQ			 7
-
-
-/*
- * MIPS32R2 counter
- */
-#define RTL838X_COMPARE_IRQ	(RTL838X_IRQ_CPU_BASE + 7)
-
-/*
- *  ICTL
- *  Base address 0xb8003000UL
- */
-#define RTL838X_ICTL1_IRQ	(RTL838X_IRQ_CPU_BASE + 2)
-#define RTL838X_ICTL2_IRQ	(RTL838X_IRQ_CPU_BASE + 3)
-#define RTL838X_ICTL3_IRQ	(RTL838X_IRQ_CPU_BASE + 4)
-#define RTL838X_ICTL4_IRQ	(RTL838X_IRQ_CPU_BASE + 5)
-#define RTL838X_ICTL5_IRQ	(RTL838X_IRQ_CPU_BASE + 6)
-
-#define GIMR			(0x00)
-#define UART0_IE		(1 << 31)
-#define UART1_IE		(1 << 30)
-#define TC0_IE			(1 << 29)
-#define TC1_IE			(1 << 28)
-#define OCPTO_IE		(1 << 27)
-#define HLXTO_IE		(1 << 26)
-#define SLXTO_IE		(1 << 25)
-#define NIC_IE			(1 << 24)
-#define GPIO_ABCD_IE		(1 << 23)
-#define GPIO_EFGH_IE		(1 << 22)
-#define RTC_IE			(1 << 21)
-#define WDT_IP1_IE		(1 << 19)
-#define WDT_IP2_IE		(1 << 18)
-
-#define GISR			(0x04)
-#define UART0_IP		(1 << 31)
-#define UART1_IP		(1 << 30)
-#define TC0_IP			(1 << 29)
-#define TC1_IP			(1 << 28)
-#define OCPTO_IP		(1 << 27)
-#define HLXTO_IP		(1 << 26)
-#define SLXTO_IP		(1 << 25)
-#define NIC_IP			(1 << 24)
-#define GPIO_ABCD_IP		(1 << 23)
-#define GPIO_EFGH_IP		(1 << 22)
-#define RTC_IP			(1 << 21)
-#define WDT_IP1_IP		(1 << 19)
-#define WDT_IP2_IP		(1 << 18)
-
-
-/* Interrupt Routing Selection */
-#define UART0_RS		2
-#define UART1_RS		1
-#define TC0_RS			5
-#define TC1_RS			1
-#define OCPTO_RS		1
-#define HLXTO_RS		1
-#define SLXTO_RS		1
-#define NIC_RS			4
-#define GPIO_ABCD_RS		4
-#define GPIO_EFGH_RS		4
-#define RTC_RS			4
-#define	SWCORE_RS		3
-#define WDT_IP1_RS		4
-#define WDT_IP2_RS		5
-
-/* Interrupt IRQ Assignments */
-#define UART0_IRQ		31
-#define UART1_IRQ		30
-#define TC0_IRQ			29
-#define TC1_IRQ			28
-#define OCPTO_IRQ		27
-#define HLXTO_IRQ		26
-#define SLXTO_IRQ		25
-#define NIC_IRQ			24
-#define GPIO_ABCD_IRQ		23
-#define GPIO_EFGH_IRQ		22
-#define RTC_IRQ			21
-#define	SWCORE_IRQ		20
-#define WDT_IP1_IRQ		19
-#define WDT_IP2_IRQ		18
-
-#define SYSTEM_FREQ		200000000
-#define RTL838X_UART0_BASE	((volatile void *)(0xb8002000UL))
-#define RTL838X_UART0_BAUD	38400  /* ex. 19200 or 38400 or 57600 or 115200 */
-#define RTL838X_UART0_FREQ	(SYSTEM_FREQ - RTL838X_UART0_BAUD * 24)
-#define RTL838X_UART0_MAPBASE	0x18002000UL
-#define RTL838X_UART0_MAPSIZE	0x100
-#define RTL838X_UART0_IRQ	UART0_IRQ
-
-#define RTL838X_UART1_BASE	((volatile void *)(0xb8002100UL))
-#define RTL838X_UART1_BAUD	38400  /* ex. 19200 or 38400 or 57600 or 115200 */
-#define RTL838X_UART1_FREQ	(SYSTEM_FREQ - RTL838X_UART1_BAUD * 24)
-#define RTL838X_UART1_MAPBASE	0x18002100UL
-#define RTL838X_UART1_MAPSIZE	0x100
-#define RTL838X_UART1_IRQ	UART1_IRQ
-
-#define UART0_RBR		(RTL838X_UART0_BASE + 0x000)
-#define UART0_THR		(RTL838X_UART0_BASE + 0x000)
-#define UART0_DLL		(RTL838X_UART0_BASE + 0x000)
-#define UART0_IER		(RTL838X_UART0_BASE + 0x004)
-#define UART0_DLM		(RTL838X_UART0_BASE + 0x004)
-#define UART0_IIR		(RTL838X_UART0_BASE + 0x008)
-#define UART0_FCR		(RTL838X_UART0_BASE + 0x008)
-#define UART0_LCR		(RTL838X_UART0_BASE + 0x00C)
-#define UART0_MCR		(RTL838X_UART0_BASE + 0x010)
-#define UART0_LSR		(RTL838X_UART0_BASE + 0x014)
-
-#define UART1_RBR		(RTL838X_UART1_BASE + 0x000)
-#define UART1_THR		(RTL838X_UART1_BASE + 0x000)
-#define UART1_DLL		(RTL838X_UART1_BASE + 0x000)
-#define UART1_IER		(RTL838X_UART1_BASE + 0x004)
-#define UART1_DLM		(RTL838X_UART1_BASE + 0x004)
-#define UART1_IIR		(RTL838X_UART1_BASE + 0x008)
-#define UART1_FCR		(RTL838X_UART1_BASE + 0x008)
-#define UART1_LCR		(RTL838X_UART1_BASE + 0x00C)
-#define UART1_MCR		(RTL838X_UART1_BASE + 0x010)
-#define UART1_LSR		(RTL838X_UART1_BASE + 0x014)
-
-/*
- * Memory Controller
- */
-#define MC_MCR			0xB8001000
-#define MC_MCR_VAL		0x00000000
-
-#define MC_DCR			0xB8001004
-#define MC_DCR0_VAL		0x54480000
-
-#define MC_DTCR			0xB8001008
-#define MC_DTCR_VAL		0xFFFF05C0
-
-/*
- * GPIO
- */
-#define GPIO_CTRL_REG_BASE		((volatile void *) 0xb8003500)
-#define RTL838X_GPIO_PABC_CNR		(GPIO_CTRL_REG_BASE + 0x0)
-#define RTL838X_GPIO_PABC_TYPE		(GPIO_CTRL_REG_BASE + 0x04)
-#define RTL838X_GPIO_PABC_DIR		(GPIO_CTRL_REG_BASE + 0x8)
-#define RTL838X_GPIO_PABC_DATA		(GPIO_CTRL_REG_BASE + 0xc)
-#define RTL838X_GPIO_PABC_ISR		(GPIO_CTRL_REG_BASE + 0x10)
-#define RTL838X_GPIO_PAB_IMR		(GPIO_CTRL_REG_BASE + 0x14)
-#define RTL838X_GPIO_PC_IMR		(GPIO_CTRL_REG_BASE + 0x18)
-
-#define RTL930X_GPIO_CTRL_REG_BASE      ((volatile void *) 0xb8003300)
-#define RTL930X_GPIO_PABCD_DIR          (RTL930X_GPIO_CTRL_REG_BASE + 0x8)
-#define RTL930X_GPIO_PABCD_DAT          (RTL930X_GPIO_CTRL_REG_BASE + 0xc)
-#define RTL930X_GPIO_PABCD_ISR          (RTL930X_GPIO_CTRL_REG_BASE + 0x10)
-#define RTL930X_GPIO_PAB_IMR            (RTL930X_GPIO_CTRL_REG_BASE + 0x14)
-#define RTL930X_GPIO_PCD_IMR            (RTL930X_GPIO_CTRL_REG_BASE + 0x18)
-
-#define RTL838X_MODEL_NAME_INFO		(0x00D4)
-#define RTL839X_MODEL_NAME_INFO		(0x0FF0)
-#define RTL93XX_MODEL_NAME_INFO		(0x0004)
-#define RTL931X_CHIP_INFO_ADDR		(0x0008)
-
-#define RTL838X_LED_GLB_CTRL		(0xA000)
-#define RTL839X_LED_GLB_CTRL		(0x00E4)
-#define RTL9302_LED_GLB_CTRL		(0xcc00)
-#define RTL930X_LED_GLB_CTRL		(0xCC00)
-#define RTL931X_LED_GLB_CTRL		(0x0600)
-
-#define RTL838X_EXT_GPIO_DIR		(0xA08C)
-#define RTL839X_EXT_GPIO_DIR		(0x0214)
-#define RTL838X_EXT_GPIO_DATA		(0xA094)
-#define RTL839X_EXT_GPIO_DATA		(0x021c)
-#define RTL838X_EXT_GPIO_INDRT_ACCESS	(0xA09C)
-#define RTL839X_EXT_GPIO_INDRT_ACCESS	(0x0224)
-#define RTL838X_EXTRA_GPIO_CTRL		(0xA0E0)
-#define RTL838X_DMY_REG5		(0x0144)
-#define RTL838X_EXTRA_GPIO_CTRL		(0xA0E0)
-
-#define RTL838X_GMII_INTF_SEL		(0x1000)
-#define RTL838X_IO_DRIVING_ABILITY_CTRL	(0x1010)
-
-#define RTL838X_GPIO_A7		31
-#define RTL838X_GPIO_A6		30
-#define RTL838X_GPIO_A5		29
-#define RTL838X_GPIO_A4		28
-#define RTL838X_GPIO_A3		27
-#define RTL838X_GPIO_A2		26
-#define RTL838X_GPIO_A1		25
-#define RTL838X_GPIO_A0		24
-#define RTL838X_GPIO_B7		23
-#define RTL838X_GPIO_B6		22
-#define RTL838X_GPIO_B5		21
-#define RTL838X_GPIO_B4		20
-#define RTL838X_GPIO_B3		19
-#define RTL838X_GPIO_B2		18
-#define RTL838X_GPIO_B1		17
-#define RTL838X_GPIO_B0		16
-#define RTL838X_GPIO_C7		15
-#define RTL838X_GPIO_C6		14
-#define RTL838X_GPIO_C5		13
-#define RTL838X_GPIO_C4		12
-#define RTL838X_GPIO_C3		11
-#define RTL838X_GPIO_C2		10
-#define RTL838X_GPIO_C1		9
-#define RTL838X_GPIO_C0		8
-
-#define RTL838X_INT_RW_CTRL		(0x0058)
-#define RTL838X_EXT_VERSION		(0x00D0)
-#define RTL838X_PLL_CML_CTRL		(0x0FF8)
-#define RTL838X_STRAP_DBG		(0x100C)
-
-/*
- * Reset
- */
-#define	RGCR				(0x1E70)
-#define RTL838X_RST_GLB_CTRL_0		(0x003c)
-#define RTL838X_RST_GLB_CTRL_1		(0x0040)
-#define RTL839X_RST_GLB_CTRL		(0x0014)
-#define RTL930X_RST_GLB_CTRL_0		(0x000c)
-#define RTL931X_RST_GLB_CTRL		(0x0400)
-
-/* LED control by switch */
-#define RTL838X_LED_MODE_SEL		(0x1004)
-#define RTL838X_LED_MODE_CTRL		(0xA004)
-#define RTL838X_LED_P_EN_CTRL		(0xA008)
-
-/* LED control by software */
-#define RTL838X_LED_SW_CTRL		(0x0128)
-#define RTL839X_LED_SW_CTRL		(0xA00C)
-#define RTL838X_LED_SW_P_EN_CTRL	(0xA010)
-#define RTL839X_LED_SW_P_EN_CTRL	(0x012C)
-#define RTL838X_LED0_SW_P_EN_CTRL	(0xA010)
-#define RTL839X_LED0_SW_P_EN_CTRL	(0x012C)
-#define RTL838X_LED1_SW_P_EN_CTRL	(0xA014)
-#define RTL839X_LED1_SW_P_EN_CTRL	(0x0130)
-#define RTL838X_LED2_SW_P_EN_CTRL	(0xA018)
-#define RTL839X_LED2_SW_P_EN_CTRL	(0x0134)
-#define RTL838X_LED_SW_P_CTRL		(0xA01C)
-#define RTL839X_LED_SW_P_CTRL		(0x0144)
-
-#define RTL839X_MAC_EFUSE_CTRL		(0x02ac)
-
-/*
- * MDIO via Realtek's SMI interface
- */
-#define RTL838X_SMI_GLB_CTRL		(0xa100)
-#define RTL838X_SMI_ACCESS_PHY_CTRL_0	(0xa1b8)
-#define RTL838X_SMI_ACCESS_PHY_CTRL_1	(0xa1bc)
-#define RTL838X_SMI_ACCESS_PHY_CTRL_2	(0xa1c0)
-#define RTL838X_SMI_ACCESS_PHY_CTRL_3	(0xa1c4)
-#define RTL838X_SMI_PORT0_5_ADDR_CTRL	(0xa1c8)
-#define RTL838X_SMI_POLL_CTRL		(0xa17c)
-
-#define RTL839X_SMI_GLB_CTRL		(0x03f8)
-#define RTL839X_SMI_PORT_POLLING_CTRL	(0x03fc)
-#define RTL839X_PHYREG_ACCESS_CTRL	(0x03DC)
-#define RTL839X_PHYREG_CTRL		(0x03E0)
-#define RTL839X_PHYREG_PORT_CTRL	(0x03E4)
-#define RTL839X_PHYREG_DATA_CTRL	(0x03F0)
-#define RTL839X_PHYREG_MMD_CTRL		(0x3F4)
-
-#define RTL930X_SMI_GLB_CTRL		(0xCA00)
-#define RTL930X_SMI_POLL_CTRL		(0xca90)
-#define RTL930X_SMI_PORT0_15_POLLING_SEL (0xCA08)
-#define RTL930X_SMI_PORT16_27_POLLING_SEL (0xCA0C)
-#define RTL930X_SMI_PORT0_5_ADDR	(0xCB80)
-#define RTL930X_SMI_ACCESS_PHY_CTRL_0	(0xCB70)
-#define RTL930X_SMI_ACCESS_PHY_CTRL_1	(0xCB74)
-#define RTL930X_SMI_ACCESS_PHY_CTRL_2	(0xCB78)
-#define RTL930X_SMI_ACCESS_PHY_CTRL_3	(0xCB7C)
-
-#define RTL931X_SMI_GLB_CTRL1		(0x0CBC)
-#define RTL931X_SMI_GLB_CTRL0		(0x0CC0)
-#define RTL931X_SMI_PORT_POLLING_CTRL	(0x0CCC)
-#define RTL931X_SMI_PORT_ADDR		(0x0C74)
-#define RTL931X_SMI_PORT_POLLING_SEL	(0x0C9C)
-#define RTL9310_SMI_PORT_POLLING_CTRL	(0x0CCC)
-#define RTL931X_SMI_INDRT_ACCESS_CTRL_0	(0x0C00)
-#define RTL931X_SMI_INDRT_ACCESS_CTRL_1	(0x0C04)
-#define RTL931X_SMI_INDRT_ACCESS_CTRL_2	(0x0C08)
-#define RTL931X_SMI_INDRT_ACCESS_CTRL_3	(0x0C10)
-#define RTL931X_SMI_INDRT_ACCESS_BC_PHYID_CTRL (0x0C14)
-#define RTL931X_SMI_INDRT_ACCESS_MMD_CTRL (0xC18)
-#define RTL931X_MAC_L2_GLOBAL_CTRL2	(0x1358)
-#define RTL931X_MAC_L2_GLOBAL_CTRL1	(0x5548)
-
-/*
- * Switch interrupts
- */
-#define RTL838X_IMR_GLB			(0x1100)
-#define RTL838X_IMR_PORT_LINK_STS_CHG	(0x1104)
-#define RTL838X_ISR_GLB_SRC		(0x1148)
-#define RTL838X_ISR_PORT_LINK_STS_CHG	(0x114C)
-
-#define RTL839X_IMR_GLB			(0x0064)
-#define RTL839X_IMR_PORT_LINK_STS_CHG	(0x0068)
-#define RTL839X_ISR_GLB_SRC		(0x009c)
-#define RTL839X_ISR_PORT_LINK_STS_CHG	(0x00a0)
-
-#define RTL930X_IMR_GLB			(0xC628)
-#define RTL930X_IMR_PORT_LINK_STS_CHG	(0xC62C)
-#define RTL930X_ISR_GLB			(0xC658)
-#define RTL930X_ISR_PORT_LINK_STS_CHG	(0xC660)
-
-// IMR_GLB does not exit on RTL931X
-#define RTL931X_IMR_PORT_LINK_STS_CHG	(0x126C)
-#define RTL931X_ISR_GLB_SRC		(0x12B4)
-#define RTL931X_ISR_PORT_LINK_STS_CHG	(0x12B8)
-
-/* Definition of family IDs */
-#define RTL8389_FAMILY_ID   (0x8389)
-#define RTL8328_FAMILY_ID   (0x8328)
-#define RTL8390_FAMILY_ID   (0x8390)
-#define RTL8350_FAMILY_ID   (0x8350)
-#define RTL8380_FAMILY_ID   (0x8380)
-#define RTL8330_FAMILY_ID   (0x8330)
-#define RTL9300_FAMILY_ID   (0x9300)
-#define RTL9310_FAMILY_ID   (0x9310)
-
-/* SPI Support */
-#define RTL931X_SPI_CTRL0		(0x103C)
-
-/* Basic SoC Features */
-#define RTL838X_CPU_PORT			28
-#define RTL839X_CPU_PORT			52
-#define RTL930X_CPU_PORT			28
-#define RTL931X_CPU_PORT			56
-
-struct rtl83xx_soc_info {
-	unsigned char *name;
-	unsigned int id;
-	unsigned int family;
-	unsigned char *compatible;
-	volatile void *sw_base;
-	volatile void *icu_base;
-	int cpu_port;
-};
-
-/* rtl83xx-related functions used across subsystems */
-int rtl838x_smi_wait_op(int timeout);
-int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val);
-int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val);
-int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val);
-int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val);
-int rtl930x_read_phy(u32 port, u32 page, u32 reg, u32 *val);
-int rtl930x_write_phy(u32 port, u32 page, u32 reg, u32 val);
-int rtl931x_read_phy(u32 port, u32 page, u32 reg, u32 *val);
-int rtl931x_write_phy(u32 port, u32 page, u32 reg, u32 val);
-
-#endif   /* _MACH_RTL838X_H_ */
diff --git a/target/linux/realtek/files-5.10/arch/mips/kernel/cevt-rtl9300.c b/target/linux/realtek/files-5.10/arch/mips/kernel/cevt-rtl9300.c
deleted file mode 100644
index 1c8c30de5d57..000000000000
--- a/target/linux/realtek/files-5.10/arch/mips/kernel/cevt-rtl9300.c
+++ /dev/null
@@ -1,200 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/clockchips.h>
-#include <linux/init.h>
-#include <asm/time.h>
-#include <asm/idle.h>
-#include <linux/interrupt.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sched_clock.h>
-
-#include <mach-rtl83xx.h>
-
-/* 
- * Timer registers
- * the RTL9300/9310 SoCs have 6 timers, each register block 0x10 apart
- */
-#define RTL9300_TC_DATA		0x0
-#define RTL9300_TC_CNT		0x4
-#define RTL9300_TC_CTRL		0x8
-#define RTL9300_TC_CTRL_MODE	BIT(24)
-#define RTL9300_TC_CTRL_EN	BIT(28)
-#define RTL9300_TC_INT		0xc
-#define RTL9300_TC_INT_IP	BIT(16)
-#define RTL9300_TC_INT_IE	BIT(20)
-
-// Timer modes
-#define TIMER_MODE_REPEAT	1
-#define TIMER_MODE_ONCE		0
-
-// Minimum divider is 2
-#define DIVISOR_RTL9300		2
-
-#define N_BITS			28
-
-#define RTL9300_CLOCK_RATE	87500000
-
-struct rtl9300_clk_dev {
-	struct clock_event_device clkdev;
-	void __iomem *base;
-};
-
-static void __iomem *rtl9300_tc_base(struct clock_event_device *clk)
-{
-	struct rtl9300_clk_dev *rtl_clk = container_of(clk, struct rtl9300_clk_dev, clkdev);
-
-	return rtl_clk->base;
-}
-
-static irqreturn_t rtl9300_timer_interrupt(int irq, void *dev_id)
-{
-	struct rtl9300_clk_dev *rtl_clk = dev_id;
-	struct clock_event_device *clk = &rtl_clk->clkdev;
-
-	u32 v = readl(rtl_clk->base + RTL9300_TC_INT);
-
-	// Acknowledge the IRQ
-	v |= RTL9300_TC_INT_IP;
-	writel(v, rtl_clk->base + RTL9300_TC_INT);
-
-	clk->event_handler(clk);
-	return IRQ_HANDLED;
-}
-
-static void rtl9300_clock_stop(void __iomem *base)
-{
-	u32 v;
-
-	writel(0, base + RTL9300_TC_CTRL);
-
-	// Acknowledge possibly pending IRQ
-	v = readl(base + RTL9300_TC_INT);
-	writel(v | RTL9300_TC_INT_IP, base + RTL9300_TC_INT);
-}
-
-static void rtl9300_timer_start(void __iomem *base, bool periodic)
-{
-	u32 v = (periodic ? RTL9300_TC_CTRL_MODE : 0) | RTL9300_TC_CTRL_EN | DIVISOR_RTL9300;
-
-	writel(0, base + RTL9300_TC_CNT);
-	pr_debug("------------- starting timer base %08x\n", (u32)base);
-	writel(v, base + RTL9300_TC_CTRL);
-}
-
-static int rtl9300_next_event(unsigned long delta, struct clock_event_device *clk)
-{
-	void __iomem *base = rtl9300_tc_base(clk);
-
-	rtl9300_clock_stop(base);
-	writel(delta, base + RTL9300_TC_DATA);
-	rtl9300_timer_start(base, TIMER_MODE_ONCE);
-
-	return 0;
-}
-
-static int rtl9300_state_periodic(struct clock_event_device *clk)
-{
-	void __iomem *base = rtl9300_tc_base(clk);
-
-	pr_debug("------------- rtl9300_state_periodic %08x\n", (u32)base);
-	rtl9300_clock_stop(base);
-	writel(RTL9300_CLOCK_RATE / HZ, base + RTL9300_TC_DATA);
-	rtl9300_timer_start(base, TIMER_MODE_REPEAT);
-	return 0;
-}
-
-static int rtl9300_state_oneshot(struct clock_event_device *clk)
-{
-	void __iomem *base = rtl9300_tc_base(clk);
-
-	pr_debug("------------- rtl9300_state_oneshot %08x\n", (u32)base);
-	rtl9300_clock_stop(base);
-	writel(RTL9300_CLOCK_RATE / HZ, base + RTL9300_TC_DATA);
-	rtl9300_timer_start(base, TIMER_MODE_ONCE);
-	return 0;
-}
-
-static int rtl9300_shutdown(struct clock_event_device *clk)
-{
-	void __iomem *base = rtl9300_tc_base(clk);
-
-	pr_debug("------------- rtl9300_shutdown %08x\n", (u32)base);
-	rtl9300_clock_stop(base);
-	return 0;
-}
-
-static void rtl9300_clock_setup(void __iomem *base)
-{
-	u32 v;
-
-	// Disable timer
-	writel(0, base + RTL9300_TC_CTRL);
-
-	// Acknowledge possibly pending IRQ
-	v = readl(base + RTL9300_TC_INT);
-	writel(v | RTL9300_TC_INT_IP, base + RTL9300_TC_INT);
-
-	// Setup maximum period (for use as clock-source)
-	writel(0x0fffffff, base + RTL9300_TC_DATA);
-}
-
-static DEFINE_PER_CPU(struct rtl9300_clk_dev, rtl9300_clockevent);
-static DEFINE_PER_CPU(char [18], rtl9300_clock_name);
-
-void rtl9300_clockevent_init(void)
-{
-	int cpu = smp_processor_id();
-	int irq;
-	struct rtl9300_clk_dev *rtl_clk = &per_cpu(rtl9300_clockevent, cpu);
-	struct clock_event_device *cd = &rtl_clk->clkdev;
-	unsigned char *name = per_cpu(rtl9300_clock_name, cpu);
-	unsigned long flags =  IRQF_PERCPU | IRQF_TIMER;
-	struct device_node *node;
-
-	pr_info("%s called for cpu%d\n", __func__, cpu);
-	BUG_ON(cpu > 3);	/* Only have 4 general purpose timers */
-
-	node = of_find_compatible_node(NULL, NULL, "realtek,rtl9300clock");
-	if (!node) {
-		pr_err("No DT entry found for realtek,rtl9300clock\n");
-		return;
-	}
-
-	irq = irq_of_parse_and_map(node, cpu);
-	pr_info("%s using IRQ %d\n", __func__, irq);
-
-	rtl_clk->base = of_iomap(node, cpu);
-	if (!rtl_clk->base) {
-		pr_err("cannot map timer for cpu %d", cpu);
-		return;
-	}
-
-	rtl9300_clock_setup(rtl_clk->base);
-
-	sprintf(name, "rtl9300-counter-%d", cpu);
-	cd->name		= name;
-	cd->features		= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-
-	clockevent_set_clock(cd, RTL9300_CLOCK_RATE);
-
-	cd->max_delta_ns	= clockevent_delta2ns(0x0fffffff, cd);
-	cd->max_delta_ticks	= 0x0fffffff;
-	cd->min_delta_ns	= clockevent_delta2ns(0x20, cd);
-	cd->min_delta_ticks	= 0x20;
-	cd->rating		= 300;
-	cd->irq			= irq;
-	cd->cpumask		= cpumask_of(cpu);
-	cd->set_next_event	= rtl9300_next_event;
-	cd->set_state_shutdown	= rtl9300_shutdown;
-	cd->set_state_periodic	= rtl9300_state_periodic;
-	cd->set_state_oneshot	= rtl9300_state_oneshot;
-	clockevents_register_device(cd);
-
-	irq_set_affinity(irq, cd->cpumask);
-
-	if (request_irq(irq, rtl9300_timer_interrupt, flags, name, rtl_clk))
-		pr_err("Failed to request irq %d (%s)\n", irq, name);
-
-	writel(RTL9300_TC_INT_IE, rtl_clk->base + RTL9300_TC_INT);
-}
diff --git a/target/linux/realtek/files-5.10/arch/mips/rtl838x/Makefile b/target/linux/realtek/files-5.10/arch/mips/rtl838x/Makefile
deleted file mode 100644
index a9d1666d4652..000000000000
--- a/target/linux/realtek/files-5.10/arch/mips/rtl838x/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the rtl838x specific parts of the kernel
-#
-
-obj-y := setup.o prom.o
diff --git a/target/linux/realtek/files-5.10/arch/mips/rtl838x/Platform b/target/linux/realtek/files-5.10/arch/mips/rtl838x/Platform
deleted file mode 100644
index 98f18cac1be1..000000000000
--- a/target/linux/realtek/files-5.10/arch/mips/rtl838x/Platform
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Realtek RTL838x SoCs
-#
-cflags-$(CONFIG_RTL83XX)   += -I$(srctree)/arch/mips/include/asm/mach-rtl838x/
-load-$(CONFIG_RTL83XX)     += 0xffffffff80100000
diff --git a/target/linux/realtek/files-5.10/arch/mips/rtl838x/prom.c b/target/linux/realtek/files-5.10/arch/mips/rtl838x/prom.c
deleted file mode 100644
index dd1b2b170d31..000000000000
--- a/target/linux/realtek/files-5.10/arch/mips/rtl838x/prom.c
+++ /dev/null
@@ -1,216 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * prom.c
- * Early intialization code for the Realtek RTL838X SoC
- *
- * based on the original BSP by
- * Copyright (C) 2006-2012 Tony Wu (tonywu@realtek.com)
- * Copyright (C) 2020 B. Koblitz
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/of_fdt.h>
-#include <linux/libfdt.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/cpu.h>
-#include <asm/fw/fw.h>
-#include <asm/smp-ops.h>
-#include <asm/mips-cps.h>
-
-#include <mach-rtl83xx.h>
-
-extern char arcs_cmdline[];
-extern const char __appended_dtb;
-
-struct rtl83xx_soc_info soc_info;
-const void *fdt;
-
-#ifdef CONFIG_MIPS_MT_SMP
-extern const struct plat_smp_ops vsmp_smp_ops;
-static struct plat_smp_ops rtl_smp_ops;
-
-static void rtl_init_secondary(void)
-{
-#ifndef CONFIG_CEVT_R4K
-/*
- * These devices are low on resources. There might be the chance that CEVT_R4K
- * is not enabled in kernel build. Nevertheless the timer and interrupt 7 might
- * be active by default after startup of secondary VPE. With no registered
- * handler that leads to continuous unhandeled interrupts. In this case disable
- * counting (DC) in the core and confirm a pending interrupt.
- */
-	write_c0_cause(read_c0_cause() | CAUSEF_DC);
-	write_c0_compare(0);
-#endif /* CONFIG_CEVT_R4K */
-/*
- * Enable all CPU interrupts, as everything is managed by the external
- * controller. TODO: Standard vsmp_init_secondary() has special treatment for
- * Malta if external GIC is available. Maybe we need this too.
- */
-	if (mips_gic_present())
-		pr_warn("%s: GIC present. Maybe interrupt enabling required.\n", __func__);
-	else
-		set_c0_status(ST0_IM);
-}
-#endif /* CONFIG_MIPS_MT_SMP */
-
-const char *get_system_type(void)
-{
-	return soc_info.name;
-}
-
-void __init prom_free_prom_memory(void)
-{
-
-}
-
-void __init device_tree_init(void)
-{
-	if (!fdt_check_header(&__appended_dtb)) {
-		fdt = &__appended_dtb;
-		pr_info("Using appended Device Tree.\n");
-	}
-	initial_boot_params = (void *)fdt;
-	unflatten_and_copy_device_tree();
-}
-
-void __init identify_rtl9302(void)
-{
-	switch (sw_r32(RTL93XX_MODEL_NAME_INFO) & 0xfffffff0) {
-	case 0x93020810:
-		soc_info.name = "RTL9302A 12x2.5G";
-		break;
-	case 0x93021010:
-		soc_info.name = "RTL9302B 8x2.5G";
-		break;
-	case 0x93021810:
-		soc_info.name = "RTL9302C 16x2.5G";
-		break;
-	case 0x93022010:
-		soc_info.name = "RTL9302D 24x2.5G";
-		break;
-	case 0x93020800:
-		soc_info.name = "RTL9302A";
-		break;
-	case 0x93021000:
-		soc_info.name = "RTL9302B";
-		break;
-	case 0x93021800:
-		soc_info.name = "RTL9302C";
-		break;
-	case 0x93022000:
-		soc_info.name = "RTL9302D";
-		break;
-	case 0x93023001:
-		soc_info.name = "RTL9302F";
-		break;
-	default:
-		soc_info.name = "RTL9302";
-	}
-}
-
-void __init prom_init(void)
-{
-	uint32_t model;
-
-	/* uart0 */
-	setup_8250_early_printk_port(0xb8002000, 2, 0);
-
-	model = sw_r32(RTL838X_MODEL_NAME_INFO);
-	pr_info("RTL838X model is %x\n", model);
-	model = model >> 16 & 0xFFFF;
-
-	if ((model != 0x8328) && (model != 0x8330) && (model != 0x8332)
-	    && (model != 0x8380) && (model != 0x8382)) {
-		model = sw_r32(RTL839X_MODEL_NAME_INFO);
-		pr_info("RTL839X model is %x\n", model);
-		model = model >> 16 & 0xFFFF;
-	}
-
-	if ((model & 0x8390) != 0x8380 && (model & 0x8390) != 0x8390) {
-		model = sw_r32(RTL93XX_MODEL_NAME_INFO);
-		pr_info("RTL93XX model is %x\n", model);
-		model = model >> 16 & 0xFFFF;
-	}
-
-	soc_info.id = model;
-
-	switch (model) {
-	case 0x8328:
-		soc_info.name = "RTL8328";
-		soc_info.family = RTL8328_FAMILY_ID;
-		break;
-	case 0x8332:
-		soc_info.name = "RTL8332";
-		soc_info.family = RTL8380_FAMILY_ID;
-		break;
-	case 0x8380:
-		soc_info.name = "RTL8380";
-		soc_info.family = RTL8380_FAMILY_ID;
-		break;
-	case 0x8382:
-		soc_info.name = "RTL8382";
-		soc_info.family = RTL8380_FAMILY_ID;
-		break;
-	case 0x8390:
-		soc_info.name = "RTL8390";
-		soc_info.family = RTL8390_FAMILY_ID;
-		break;
-	case 0x8391:
-		soc_info.name = "RTL8391";
-		soc_info.family = RTL8390_FAMILY_ID;
-		break;
-	case 0x8392:
-		soc_info.name = "RTL8392";
-		soc_info.family = RTL8390_FAMILY_ID;
-		break;
-	case 0x8393:
-		soc_info.name = "RTL8393";
-		soc_info.family = RTL8390_FAMILY_ID;
-		break;
-	case 0x9301:
-		soc_info.name = "RTL9301";
-		soc_info.family = RTL9300_FAMILY_ID;
-		break;
-	case 0x9302:
-		identify_rtl9302();
-		soc_info.family = RTL9300_FAMILY_ID;
-		break;
-	case 0x9303:
-		soc_info.name = "RTL9303";
-		soc_info.family = RTL9300_FAMILY_ID;
-		break;
-	case 0x9313:
-		soc_info.name = "RTL9313";
-		soc_info.family = RTL9310_FAMILY_ID;
-		break;
-	default:
-		soc_info.name = "DEFAULT";
-		soc_info.family = 0;
-	}
-
-	pr_info("SoC Type: %s\n", get_system_type());
-
-	fw_init_cmdline();
-
-	mips_cpc_probe();
-
-	if (!register_cps_smp_ops())
-		return;
-
-#ifdef CONFIG_MIPS_MT_SMP
-	if (cpu_has_mipsmt) {
-		rtl_smp_ops = vsmp_smp_ops;
-		rtl_smp_ops.init_secondary = rtl_init_secondary;
-		register_smp_ops(&rtl_smp_ops);
-		return;
-	}
-#endif
-
-	register_up_smp_ops();
-}
diff --git a/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c b/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
deleted file mode 100644
index b4d415ab4426..000000000000
--- a/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Setup for the Realtek RTL838X SoC:
- *	Memory, Timer and Serial
- *
- * Copyright (C) 2020 B. Koblitz
- * based on the original BSP by
- * Copyright (C) 2006-2012 Tony Wu (tonywu@realtek.com)
- *
- */
-
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/of_fdt.h>
-#include <linux/irqchip.h>
-
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/prom.h>
-#include <asm/smp-ops.h>
-
-#include "mach-rtl83xx.h"
-
-extern struct rtl83xx_soc_info soc_info;
-
-void __init plat_mem_setup(void)
-{
-	void *dtb;
-
-	set_io_port_base(KSEG1);
-
-	if (fw_passed_dtb) /* UHI interface */
-		dtb = (void *)fw_passed_dtb;
-	else if (&__dtb_start[0] != &__dtb_end[0])
-		dtb = (void *)__dtb_start;
-	else
-		panic("no dtb found");
-
-	/*
-	 * Load the devicetree. This causes the chosen node to be
-	 * parsed resulting in our memory appearing
-	 */
-	__dt_setup_arch(dtb);
-}
-
-void plat_time_init_fallback(void)
-{
-	struct device_node *np;
-	u32 freq = 500000000;
-
-	np = of_find_node_by_name(NULL, "cpus");
-	if (!np) {
-		pr_err("Missing 'cpus' DT node, using default frequency.");
-	} else {
-		if (of_property_read_u32(np, "frequency", &freq) < 0)
-			pr_err("No 'frequency' property in DT, using default.");
-		else
-			pr_info("CPU frequency from device tree: %dMHz", freq / 1000000);
-		of_node_put(np);
-	}
-	mips_hpt_frequency = freq / 2;
-}
-
-void __init plat_time_init(void)
-{
-/*
- * Initialization routine resembles generic MIPS plat_time_init() with
- * lazy error handling. The final fallback is only needed until we have
- * converted all device trees to new clock syntax.
- */
-	struct device_node *np;
-	struct clk *clk;
-
-	of_clk_init(NULL);
-
-	mips_hpt_frequency = 0;
-	np = of_get_cpu_node(0, NULL);
-	if (!np) {
-		pr_err("Failed to get CPU node\n");
-	} else {
-		clk = of_clk_get(np, 0);
-		if (IS_ERR(clk)) {
-			pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
-		} else {
-			mips_hpt_frequency = clk_get_rate(clk) / 2;
-			clk_put(clk);
-		}
-	}
-
-	if (!mips_hpt_frequency)
-		plat_time_init_fallback();
-
-	timer_probe();
-}
-
-void __init arch_init_irq(void)
-{
-	irqchip_init();
-}
diff --git a/target/linux/realtek/files-5.10/drivers/clk/realtek/Kconfig b/target/linux/realtek/files-5.10/drivers/clk/realtek/Kconfig
deleted file mode 100644
index 4cf3cd963399..000000000000
--- a/target/linux/realtek/files-5.10/drivers/clk/realtek/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-menuconfig COMMON_CLK_REALTEK
-	bool "Support for Realtek's clock controllers"
-	depends on RTL83XX
-
-if COMMON_CLK_REALTEK
-
-config COMMON_CLK_RTL83XX
-	bool "Clock driver for Realtek RTL83XX"
-	depends on RTL83XX
-	select SRAM
-	help
-	  This driver adds support for the Realtek RTL83xx series basic clocks.
-	  This includes chips in the RTL838x series, such as RTL8380, RTL8381,
-	  RTL832, as well as chips from the RTL839x series, such as RTL8390,
-	  RT8391, RTL8392, RTL8393 and RTL8396.
-
-endif
diff --git a/target/linux/realtek/files-5.10/drivers/clk/realtek/Makefile b/target/linux/realtek/files-5.10/drivers/clk/realtek/Makefile
deleted file mode 100644
index 7bc4ed910c52..000000000000
--- a/target/linux/realtek/files-5.10/drivers/clk/realtek/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_COMMON_CLK_RTL83XX) += clk-rtl83xx.o clk-rtl838x-sram.o clk-rtl839x-sram.o
diff --git a/target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl838x-sram.S b/target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl838x-sram.S
deleted file mode 100644
index 527436bbab48..000000000000
--- a/target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl838x-sram.S
+++ /dev/null
@@ -1,150 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Realtek RTL838X SRAM clock setters
- * Copyright (C) 2022 Markus Stockhausen <markus.stockhausen@gmx.de>
- */
-
-#include <dt-bindings/clock/rtl83xx-clk.h>
-
-#include "clk-rtl83xx.h"
-
-#define rGLB	$t0
-#define rCTR	$t1
-#define rMSK	$t2
-#define rSLP	$t3
-#define rTMP	$t4
-
-.set	noreorder
-
-.globl	rtcl_838x_dram_start
-rtcl_838x_dram_start:
-
-/*
- * Functions start here and should avoid access to normal memory. REMARK! Do not forget about
- * stack pointer and dirty caches that might interfere.
- */
-
-.globl	rtcl_838x_dram_set_rate
-.ent	rtcl_838x_dram_set_rate
-rtcl_838x_dram_set_rate:
-
-#ifdef CONFIG_RTL838X
-
-	li	rCTR, RTL_SW_CORE_BASE
-	addiu	rGLB, rCTR, RTL838X_PLL_GLB_CTRL
-	ori	rTMP, $0, CLK_CPU
-	beq	$a0, rTMP, pre_cpu
-	ori	rTMP, $0, CLK_MEM
-	beq	$a0, rTMP, pre_mem
-	nop
-pre_lxb:
-	ori	rSLP, $0, RTL838X_GLB_CTRL_LXB_PLL_READY_MASK
-	addiu	rCTR, rCTR, RTL838X_PLL_LXB_CTRL0
-	b	main_set
-	ori	rMSK, $0, RTL838X_GLB_CTRL_EN_LXB_PLL_MASK
-pre_mem:
-	/* simple 64K data cache flush to avoid unexpected memory access */
-	li	rMSK, RTL_SRAM_BASE
-	li	rTMP, 2048
-pre_flush:
-	lw	$0, 0(rMSK)
-	addiu	rMSK, rMSK, 32
-	addiu	rTMP, rTMP, -1
-	bne	rTMP, $0, pre_flush
-	lw	$0, -4(rMSK)
-
-	ori	rSLP, $0, RTL838X_GLB_CTRL_MEM_PLL_READY_MASK
-	addiu	rCTR, rCTR, RTL838X_PLL_MEM_CTRL0
-	b	main_set
-	ori	rMSK, $0, RTL838X_GLB_CTRL_EN_MEM_PLL_MASK
-pre_cpu:
-	/* switch CPU to LXB clock */
-	ori	rMSK, $0, RTL838X_GLB_CTRL_CPU_PLL_SC_MUX_MASK
-	nor	rMSK, rMSK, $0
-	sync
-	lw	rTMP, 0(rGLB)
-	and	rTMP, rTMP, rMSK
-	sw	rTMP, 0(rGLB)
-	sync
-
-	ori	rSLP, $0, RTL838X_GLB_CTRL_CPU_PLL_READY_MASK
-	addiu	rCTR, rCTR, RTL838X_PLL_CPU_CTRL0
-	ori	rMSK, $0, RTL838X_GLB_CTRL_EN_CPU_PLL_MASK
-main_set:
-	/* disable PLL */
-	nor	rMSK, rMSK, 0
-	sync
-	lw	rTMP, 0(rGLB)
-	sync
-	and	rTMP, rTMP, rMSK
-	sync
-	sw	rTMP, 0(rGLB)
-
-	/* set new PLL values */
-	sync
-	sw	$a1, 0(rCTR)
-	sw	$a2, 4(rCTR)
-	sync
-
-	/* enable PLL (will reset it and clear ready status) */
-	nor	rMSK, rMSK, 0
-	sync
-	lw	rTMP, 0(rGLB)
-	sync
-	or	rTMP, rTMP, rMSK
-	sync
-	sw	rTMP, 0(rGLB)
-
-	/* wait for PLL to become ready */
-wait_ready:
-	lw	rTMP, 0(rGLB)
-	and	rTMP, rTMP, rSLP
-	bne	rTMP, $0, wait_ready
-	sync
-
-	/* branch to post processing */
-	ori	rTMP, $0, CLK_CPU
-	beq	$a0, rTMP, post_cpu
-	ori	rTMP, $0, CLK_MEM
-	beq	$a0, rTMP, post_mem
-	nop
-post_lxb:
-	jr	$ra
-	nop
-post_mem:
-	jr	$ra
-	nop
-post_cpu:
-	/* stabilize clock to avoid crash, empirically determined */
-	ori	rSLP, $0, 0x3000
-wait_cpu:
-	bnez	rSLP, wait_cpu
-	addiu	rSLP, rSLP, -1
-
-	/* switch CPU to PLL clock */
-	ori	rMSK, $0, RTL838X_GLB_CTRL_CPU_PLL_SC_MUX_MASK
-	sync
-	lw	rTMP, 0(rGLB)
-	or	rTMP, rTMP, rMSK
-	sw	rTMP, 0(rGLB)
-	sync
-	jr	$ra
-	nop
-
-#else /* !CONFIG_RTL838X */
-
-	jr	$ra
-	nop
-
-#endif
-
-.end	rtcl_838x_dram_set_rate
-
-/*
- * End marker. Do not delete.
- */
-	.word RTL_SRAM_MARKER
-.globl	rtcl_838x_dram_size
-rtcl_838x_dram_size:
-	.word .-rtcl_838x_dram_start
-
diff --git a/target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl839x-sram.S b/target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl839x-sram.S
deleted file mode 100644
index cd43dfaabd0b..000000000000
--- a/target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl839x-sram.S
+++ /dev/null
@@ -1,142 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Realtek RTL839X SRAM clock setters
- * Copyright (C) 2022 Markus Stockhausen <markus.stockhausen@gmx.de>
- */
-
-#include <asm/mipsregs.h>
-#include <dt-bindings/clock/rtl83xx-clk.h>
-
-#include "clk-rtl83xx.h"
-
-#define rGLB	$t0
-#define rCTR	$t1
-#define rMSK	$t2
-#define rSLP1	$t3
-#define rSLP2	$t4
-#define rSLP3	$t5
-#define rTMP	$t6
-#define rCP0	$t7
-
-.set	noreorder
-
-.globl	rtcl_839x_dram_start
-rtcl_839x_dram_start:
-
-/*
- * Functions start here and should avoid access to normal memory. REMARK! Do not forget about
- * stack pointer and dirty caches that might interfere.
- */
-
-.globl	rtcl_839x_dram_set_rate
-.ent	rtcl_839x_dram_set_rate
-rtcl_839x_dram_set_rate:
-
-#ifdef CONFIG_RTL839X
-
-	/* disable MIPS 34K branch and return prediction */
-        mfc0    rCP0, CP0_CONFIG, 7
-        ori     rTMP, rCP0, 0xc
-        mtc0    rTMP, CP0_CONFIG, 7
-
-	li	rCTR, RTL_SW_CORE_BASE
-	addiu	rGLB, rCTR, RTL839X_PLL_GLB_CTRL
-	ori	rTMP, $0, CLK_CPU
-	beq	$a0, rTMP, pre_cpu
-	ori	rTMP, $0, CLK_MEM
-	beq	$a0, rTMP, pre_mem
-	nop
-pre_lxb:
-	li	rSLP1, 0x400000
-	li	rSLP2, 0x400000
-	li	rSLP3, 0x400000
-	addiu	rCTR, rCTR, RTL839X_PLL_LXB_CTRL0
-	b	main_set
-	ori	rMSK, $0, RTL839X_GLB_CTRL_LXB_CLKSEL_MASK
-pre_mem:
-	/* try to avoid memory access with simple 64K data cache flush */
-	li	rMSK, RTL_SRAM_BASE
-	li	rTMP, 2048
-pre_flush:
-	lw	$0, 0(rMSK)
-	addiu	rMSK, rMSK, 32
-	addiu	rTMP, rTMP, -1
-	bne	rTMP, $0, pre_flush
-	lw	$0, -4(rMSK)
-
-	li	rSLP1, 0x10000
-	li	rSLP2, 0x10000
-	li	rSLP3, 0x10000
-	addiu	rCTR, rCTR, RTL839X_PLL_MEM_CTRL0
-	b	main_set
-	ori	rMSK, $0, RTL839X_GLB_CTRL_MEM_CLKSEL_MASK
-pre_cpu:
-	li	rSLP1, 0x1000
-	li	rSLP2, 0x1000
-	li	rSLP3, 0x200
-	addiu	rCTR, rCTR, RTL839X_PLL_CPU_CTRL0
-	ori	rMSK, $0, RTL839X_GLB_CTRL_CPU_CLKSEL_MASK
-main_set:
-	/* switch to fixed clock */
-	sync
-	lw	rTMP, 0(rGLB)
-	sync
-	or	rTMP, rTMP, rMSK
-	sync
-	sw	rTMP, 0(rGLB)
-
-	/* wait until fixed clock in use */
-	or	rTMP, rSLP1, $0
-wait_fixclock:
-	bnez	rTMP, wait_fixclock
-	addiu	rTMP, rTMP, -1
-
-	/* set new PLL values */
-	sync
-	sw	$a1, 0(rCTR)
-	sw	$a2, 4(rCTR)
-	sync
-
-	/* wait for value takeover */
-	or	rTMP, rSLP2, $0
-wait_pll:
-	bnez	rTMP, wait_pll
-	addiu	rTMP, rTMP, -1
-
-	/* switch back to PLL clock*/
-	nor	rMSK, rMSK, $0
-	sync
-	lw	rTMP, 0(rGLB)
-	sync
-	and	rTMP, rTMP, rMSK
-	sync
-	sw	rTMP, 0(rGLB)
-
-	/* wait until PLL clock in use */
-	or	rTMP, rSLP3, $0
-wait_pllclock:
-	bnez	rTMP, wait_pllclock
-	addiu	rTMP, rTMP, -1
-
-	/* restore branch prediction */
-	mtc0    rCP0, CP0_CONFIG, 7
-	jr	$ra
-	nop
-
-#else /* !CONFIG_RTL839X */
-
-	jr	$ra
-	nop
-
-#endif
-
-.end	rtcl_839x_dram_set_rate
-
-/*
- * End marker. Do not delete.
- */
-	 .word RTL_SRAM_MARKER
-.globl	rtcl_839x_dram_size
-rtcl_839x_dram_size:
-	.word .-rtcl_839x_dram_start
-
diff --git a/target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl83xx.c b/target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl83xx.c
deleted file mode 100644
index 9b8183fbebd6..000000000000
--- a/target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl83xx.c
+++ /dev/null
@@ -1,766 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Realtek RTL83XX clock driver
- * Copyright (C) 2022 Markus Stockhausen <markus.stockhausen@gmx.de>
- *
- * This driver provides basic clock support for the central core clock unit (CCU) and its PLLs
- * inside the RTL838X and RTL8389X SOC. Currently CPU, memory and LXB clock information can be
- * accessed. To make use of the driver add the following devices and configurations at the
- * appropriate locations to the DT.
- *
- * #include <dt-bindings/clock/rtl83xx-clk.h>
- *
- * sram0: sram@9f000000 {
- *   compatible = "mmio-sram";
- *   reg = <0x9f000000 0x18000>;
- *   #address-cells = <1>;
- *   #size-cells = <1>;
- *   ranges = <0 0x9f000000 0x18000>;
- * };
- *
- * osc: oscillator {
- *   compatible = "fixed-clock";
- *   #clock-cells = <0>;
- *   clock-frequency = <25000000>;
- * };
- *
- * ccu: clock-controller {
- *   compatible = "realtek,rtl8380-clock";
- *   #clock-cells = <1>;
- *   clocks = <&osc>;
- *   clock-names = "ref_clk";
- * };
- *
- *
- * The SRAM part is needed to be able to set clocks. When changing clocks the code must not run
- * from DRAM. Otherwise system might freeze. Take care to adjust CCU compatibility, SRAM address
- * and size to the target SOC device. Afterwards one can access/identify the clocks in the other
- * DT devices with <&ccu CLK_CPU>, <&ccu CLK_MEM> or <&ccu CLK_LXB>. Additionally the clocks can
- * be used inside the kernel with
- *
- * cpu_clk = clk_get(NULL, "cpu_clk");
- * mem_clk = clk_get(NULL, "mem_clk");
- * lxb_clk = clk_get(NULL, "lxb_clk");
- *
- * This driver can be directly used by the DT based cpufreq driver (CONFIG_CPUFREQ_DT) if CPU
- * references the right clock and sane operating points (OPP) are provided. E.g.
- *
- * cpu@0 {
- *   compatible = "mips,mips4KEc";
- *   reg = <0>;
- *   clocks = <&ccu CLK_CPU>;
- *   operating-points-v2 = <&cpu_opp_table>;
- * };
- *
- * cpu_opp_table: opp-table-0 {
- *   compatible = "operating-points-v2";
- *   opp-shared;
- *   opp00 {
- *     opp-hz = /bits/ 64 <425000000>;
- *   };
- *   ...
- * }
- */
-
-#include <asm/cacheflush.h>
-#include <asm/mipsmtregs.h>
-#include <dt-bindings/clock/rtl83xx-clk.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/cpu.h>
-#include <linux/delay.h>
-#include <linux/genalloc.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include "clk-rtl83xx.h"
-
-#define read_sw(reg)		ioread32(((void *)RTL_SW_CORE_BASE) + reg)
-#define read_soc(reg)		ioread32(((void *)RTL_SOC_BASE) + reg)
-
-#define write_sw(val, reg)	iowrite32(val, ((void *)RTL_SW_CORE_BASE) + reg)
-#define write_soc(val, reg)	iowrite32(val, ((void *)RTL_SOC_BASE) + reg)
-
-/*
- * some hardware specific definitions
- */
-
-#define SOC_RTL838X		0
-#define SOC_RTL839X		1
-#define SOC_COUNT		2
-
-#define MEM_DDR1		1
-#define MEM_DDR2		2
-#define MEM_DDR3		3
-
-#define REG_CTRL0		0
-#define REG_CTRL1		1
-#define REG_COUNT		2
-
-#define OSC_RATE		25000000
-
-static const int rtcl_regs[SOC_COUNT][REG_COUNT][CLK_COUNT] = {
-	{
-		{ RTL838X_PLL_CPU_CTRL0, RTL838X_PLL_MEM_CTRL0, RTL838X_PLL_LXB_CTRL0 },
-		{ RTL838X_PLL_CPU_CTRL1, RTL838X_PLL_MEM_CTRL1, RTL838X_PLL_LXB_CTRL1 },
-	}, {
-		{ RTL839X_PLL_CPU_CTRL0, RTL839X_PLL_MEM_CTRL0, RTL839X_PLL_LXB_CTRL0 },
-		{ RTL839X_PLL_CPU_CTRL1, RTL839X_PLL_MEM_CTRL1, RTL839X_PLL_LXB_CTRL1 },
-	}
-};
-
-#define RTCL_REG_SET(_rate, _ctrl0, _ctrl1)	\
-	{					\
-		.rate = _rate,			\
-		.ctrl0 = _ctrl0,		\
-		.ctrl1 = _ctrl1,		\
-	}
-
-struct rtcl_reg_set {
-	unsigned int rate;
-	unsigned int ctrl0;
-	unsigned int ctrl1;
-};
-
-/*
- * The following configuration tables are valid operation points for their corresponding PLLs.
- * The magic numbers are precalculated mulitpliers and dividers to keep the driver simple. They
- * also provide rates outside the allowed physical specifications. E.g. DDR3 memory has a lower
- * limit of 303 MHz or the CPU might get unstable if set to anything above its startup frequency.
- * Additionally the Realtek SOCs tend to expect CPU speed > MEM speed > LXB speed. The caller or
- * DT configuration must take care that only valid operating points are selected.
- */
-
-static const struct rtcl_reg_set rtcl_838x_cpu_reg_set[] = {
-	RTCL_REG_SET(300000000, 0x045c8, 0x1414530e),
-	RTCL_REG_SET(325000000, 0x04648, 0x1414530e),
-	RTCL_REG_SET(350000000, 0x046c8, 0x1414530e),
-	RTCL_REG_SET(375000000, 0x04748, 0x1414530e),
-	RTCL_REG_SET(400000000, 0x045c8, 0x0c14530e),
-	RTCL_REG_SET(425000000, 0x04628, 0x0c14530e),
-	RTCL_REG_SET(450000000, 0x04688, 0x0c14530e),
-	RTCL_REG_SET(475000000, 0x046e8, 0x0c14530e),
-	RTCL_REG_SET(500000000, 0x04748, 0x0c14530e),
-	RTCL_REG_SET(525000000, 0x047a8, 0x0c14530e),
-	RTCL_REG_SET(550000000, 0x04808, 0x0c14530e),
-	RTCL_REG_SET(575000000, 0x04868, 0x0c14530e),
-	RTCL_REG_SET(600000000, 0x048c8, 0x0c14530e),
-	RTCL_REG_SET(625000000, 0x04928, 0x0c14530e)
-};
-
-static const struct rtcl_reg_set rtcl_838x_mem_reg_set[] = {
-	RTCL_REG_SET(200000000, 0x041bc, 0x14018C80),
-	RTCL_REG_SET(225000000, 0x0417c, 0x0c018C80),
-	RTCL_REG_SET(250000000, 0x041ac, 0x0c018C80),
-	RTCL_REG_SET(275000000, 0x0412c, 0x04018C80),
-	RTCL_REG_SET(300000000, 0x0414c, 0x04018c80),
-	RTCL_REG_SET(325000000, 0x0416c, 0x04018c80),
-	RTCL_REG_SET(350000000, 0x0418c, 0x04018c80),
-	RTCL_REG_SET(375000000, 0x041ac, 0x04018c80)
-};
-
-static const struct rtcl_reg_set rtcl_838x_lxb_reg_set[] = {
-	RTCL_REG_SET(100000000, 0x043c8, 0x001ad30e),
-	RTCL_REG_SET(125000000, 0x043c8, 0x001ad30e),
-	RTCL_REG_SET(150000000, 0x04508, 0x1c1ad30e),
-	RTCL_REG_SET(175000000, 0x04508, 0x1c1ad30e),
-	RTCL_REG_SET(200000000, 0x047c8, 0x001ad30e)
-};
-
-static const struct rtcl_reg_set rtcl_839x_cpu_reg_set[] = {
-	RTCL_REG_SET(400000000, 0x0414c, 0x00000005),
-	RTCL_REG_SET(425000000, 0x041ec, 0x00000006),
-	RTCL_REG_SET(450000000, 0x0417c, 0x00000005),
-	RTCL_REG_SET(475000000, 0x0422c, 0x00000006),
-	RTCL_REG_SET(500000000, 0x041ac, 0x00000005),
-	RTCL_REG_SET(525000000, 0x0426c, 0x00000006),
-	RTCL_REG_SET(550000000, 0x0412c, 0x00000004),
-	RTCL_REG_SET(575000000, 0x042ac, 0x00000006),
-	RTCL_REG_SET(600000000, 0x0414c, 0x00000004),
-	RTCL_REG_SET(625000000, 0x042ec, 0x00000006),
-	RTCL_REG_SET(650000000, 0x0416c, 0x00000004),
-	RTCL_REG_SET(675000000, 0x04324, 0x00000006),
-	RTCL_REG_SET(700000000, 0x0418c, 0x00000004),
-	RTCL_REG_SET(725000000, 0x0436c, 0x00000006),
-	RTCL_REG_SET(750000000, 0x0438c, 0x00000006),
-	RTCL_REG_SET(775000000, 0x043ac, 0x00000006),
-	RTCL_REG_SET(800000000, 0x043cc, 0x00000006),
-	RTCL_REG_SET(825000000, 0x043ec, 0x00000006),
-	RTCL_REG_SET(850000000, 0x0440c, 0x00000006)
-};
-
-static const struct rtcl_reg_set rtcl_839x_mem_reg_set[] = {
-	RTCL_REG_SET(100000000, 0x041cc, 0x00000000),
-	RTCL_REG_SET(125000000, 0x041ac, 0x00000007),
-	RTCL_REG_SET(150000000, 0x0414c, 0x00000006),
-	RTCL_REG_SET(175000000, 0x0418c, 0x00000006),
-	RTCL_REG_SET(200000000, 0x041cc, 0x00000006),
-	RTCL_REG_SET(225000000, 0x0417c, 0x00000005),
-	RTCL_REG_SET(250000000, 0x041ac, 0x00000005),
-	RTCL_REG_SET(275000000, 0x0412c, 0x00000004),
-	RTCL_REG_SET(300000000, 0x0414c, 0x00000004),
-	RTCL_REG_SET(325000000, 0x0416c, 0x00000004),
-	RTCL_REG_SET(350000000, 0x0418c, 0x00000004),
-	RTCL_REG_SET(375000000, 0x041ac, 0x00000004),
-	RTCL_REG_SET(400000000, 0x041cc, 0x00000004)
-};
-
-static const struct rtcl_reg_set rtcl_839x_lxb_reg_set[] = {
-	RTCL_REG_SET(50000000, 0x1414c, 0x00000003),
-	RTCL_REG_SET(100000000, 0x0814c, 0x00000003),
-	RTCL_REG_SET(150000000, 0x0414c, 0x00000003),
-	RTCL_REG_SET(200000000, 0x0414c, 0x00000007)
-};
-
-struct rtcl_rtab_set {
-	int count;
-	const struct rtcl_reg_set *rset;
-};
-
-#define RTCL_RTAB_SET(_rset)			\
-	{					\
-		.count = ARRAY_SIZE(_rset),	\
-		.rset = _rset,			\
-	}
-
-static const struct rtcl_rtab_set rtcl_rtab_set[SOC_COUNT][CLK_COUNT] = {
-	{
-		RTCL_RTAB_SET(rtcl_838x_cpu_reg_set),
-		RTCL_RTAB_SET(rtcl_838x_mem_reg_set),
-		RTCL_RTAB_SET(rtcl_838x_lxb_reg_set)
-	}, {
-		RTCL_RTAB_SET(rtcl_839x_cpu_reg_set),
-		RTCL_RTAB_SET(rtcl_839x_mem_reg_set),
-		RTCL_RTAB_SET(rtcl_839x_lxb_reg_set)
-	}
-};
-
-#define RTCL_ROUND_SET(_min, _max, _step)	\
-	{					\
-		.min = _min,			\
-		.max = _max,			\
-		.step = _step,			\
-	}
-
-struct rtcl_round_set {
-	unsigned long min;
-	unsigned long max;
-	unsigned long step;
-};
-
-static const struct rtcl_round_set rtcl_round_set[SOC_COUNT][CLK_COUNT] = {
-	{
-		RTCL_ROUND_SET(300000000, 625000000, 25000000),
-		RTCL_ROUND_SET(200000000, 375000000, 25000000),
-		RTCL_ROUND_SET(100000000, 200000000, 25000000)
-	}, {
-		RTCL_ROUND_SET(400000000, 850000000, 25000000),
-		RTCL_ROUND_SET(100000000, 400000000, 25000000),
-		RTCL_ROUND_SET(50000000, 200000000, 50000000)
-	}
-};
-
-static const int rtcl_divn3[] = { 2, 3, 4, 6 };
-static const int rtcl_xdiv[] = { 2, 4, 2 };
-
-/*
- * module data structures
- */
-
-#define RTCL_CLK_INFO(_idx, _name, _pname, _dname)	\
-	{						\
-		.idx = _idx,				\
-		.name = _name,				\
-		.parent_name = _pname,			\
-		.display_name = _dname,			\
-	}
-
-struct rtcl_clk_info {
-	unsigned int idx;
-	const char *name;
-	const char *parent_name;
-	const char *display_name;
-};
-
-struct rtcl_clk {
-	struct clk_hw hw;
-	unsigned int idx;
-	unsigned long min;
-	unsigned long max;
-	unsigned long rate;
-	unsigned long startup;
-};
-
-static const struct rtcl_clk_info rtcl_clk_info[CLK_COUNT] = {
-	RTCL_CLK_INFO(CLK_CPU, "cpu_clk", "ref_clk", "CPU"),
-	RTCL_CLK_INFO(CLK_MEM, "mem_clk", "ref_clk", "MEM"),
-	RTCL_CLK_INFO(CLK_LXB, "lxb_clk", "ref_clk", "LXB")
-};
-
-struct rtcl_dram {
-	int type;
-	int buswidth;
-};
-
-struct rtcl_sram {
-	int *pmark;
-	unsigned long vbase;
-};
-
-struct rtcl_ccu {
-	spinlock_t lock;
-	unsigned int soc;
-	struct rtcl_sram sram;
-	struct rtcl_dram dram;
-	struct device_node *np;
-	struct platform_device *pdev;
-	struct rtcl_clk clks[CLK_COUNT];
-};
-
-struct rtcl_ccu *rtcl_ccu;
-
-#define rtcl_hw_to_clk(_hw) container_of(_hw, struct rtcl_clk, hw)
-
-/*
- * SRAM relocatable assembler functions. The dram() parts point to normal kernel memory while
- * the sram() parts are the same functions but relocated to SRAM.
- */
-
-extern void	rtcl_838x_dram_start(void);
-extern int	rtcl_838x_dram_size;
-
-extern void	(*rtcl_838x_dram_set_rate)(int clk_idx, int ctrl0, int ctrl1);
-static void	(*rtcl_838x_sram_set_rate)(int clk_idx, int ctrl0, int ctrl1);
-
-extern void	rtcl_839x_dram_start(void);
-extern int	rtcl_839x_dram_size;
-
-extern void	(*rtcl_839x_dram_set_rate)(int clk_idx, int ctrl0, int ctrl1);
-static void	(*rtcl_839x_sram_set_rate)(int clk_idx, int ctrl0, int ctrl1);
-
-/*
- * clock setter/getter functions
- */
-
-static unsigned long rtcl_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
-{
-	struct rtcl_clk *clk = rtcl_hw_to_clk(hw);
-	unsigned int ctrl0, ctrl1, div1, div2, cmu_ncode_in;
-	unsigned int cmu_sel_prediv, cmu_sel_div4, cmu_divn2, cmu_divn2_selb, cmu_divn3_sel;
-
-	if ((clk->idx >= CLK_COUNT) || (!rtcl_ccu) || (rtcl_ccu->soc >= SOC_COUNT))
-		return 0;
-
-	ctrl0 = read_sw(rtcl_regs[rtcl_ccu->soc][REG_CTRL0][clk->idx]);
-	ctrl1 = read_sw(rtcl_regs[rtcl_ccu->soc][REG_CTRL1][clk->idx]);
-
-	cmu_sel_prediv = 1 << RTL_PLL_CTRL0_CMU_SEL_PREDIV(ctrl0);
-	cmu_sel_div4 = RTL_PLL_CTRL0_CMU_SEL_DIV4(ctrl0) ? 4 : 1;
-	cmu_ncode_in = RTL_PLL_CTRL0_CMU_NCODE_IN(ctrl0) + 4;
-	cmu_divn2 = RTL_PLL_CTRL0_CMU_DIVN2(ctrl0) + 4;
-
-	switch (rtcl_ccu->soc) {
-	case SOC_RTL838X:
-		if ((ctrl0 == 0) && (ctrl1 == 0) && (clk->idx == CLK_LXB))
-			return 200000000;
-
-		cmu_divn2_selb = RTL838X_PLL_CTRL1_CMU_DIVN2_SELB(ctrl1);
-		cmu_divn3_sel = rtcl_divn3[RTL838X_PLL_CTRL1_CMU_DIVN3_SEL(ctrl1)];
-		break;
-	case SOC_RTL839X:
-		cmu_divn2_selb = RTL839X_PLL_CTRL1_CMU_DIVN2_SELB(ctrl1);
-		cmu_divn3_sel = rtcl_divn3[RTL839X_PLL_CTRL1_CMU_DIVN3_SEL(ctrl1)];
-		break;
-	}
-	div1 = cmu_divn2_selb ? cmu_divn3_sel : cmu_divn2;
-	div2 = rtcl_xdiv[clk->idx];
-
-	return (((parent_rate / 16) * cmu_ncode_in) / (div1 * div2)) *
-		cmu_sel_prediv * cmu_sel_div4 * 16;
-}
-
-static int rtcl_838x_set_rate(int clk_idx, const struct rtcl_reg_set *reg)
-{
-	unsigned long irqflags;
-/*
- * Runtime of this function (including locking)
- * CPU: up to 14000 cycles / up to 56 us at 250 MHz (half default speed)
- */
-	spin_lock_irqsave(&rtcl_ccu->lock, irqflags);
-	rtcl_838x_sram_set_rate(clk_idx, reg->ctrl0, reg->ctrl1);
-	spin_unlock_irqrestore(&rtcl_ccu->lock, irqflags);
-
-	return 0;
-}
-
-static int rtcl_839x_set_rate(int clk_idx, const struct rtcl_reg_set *reg)
-{
-	unsigned long vpflags;
-	unsigned long irqflags;
-/*
- * Runtime of this function (including locking)
- * CPU: up to 31000 cycles / up to 89 us at 350 MHz (half default speed)
- */
-	spin_lock_irqsave(&rtcl_ccu->lock, irqflags);
-	vpflags = dvpe();
-	rtcl_839x_sram_set_rate(clk_idx, reg->ctrl0, reg->ctrl1);
-	evpe(vpflags);
-	spin_unlock_irqrestore(&rtcl_ccu->lock, irqflags);
-
-	return 0;
-}
-
-static int rtcl_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate)
-{
-	int tab_idx;
-	struct rtcl_clk *clk = rtcl_hw_to_clk(hw);
-	const struct rtcl_rtab_set *rtab = &rtcl_rtab_set[rtcl_ccu->soc][clk->idx];
-	const struct rtcl_round_set *round = &rtcl_round_set[rtcl_ccu->soc][clk->idx];
-
-	if ((parent_rate != OSC_RATE) || (!rtcl_ccu->sram.vbase))
-		return -EINVAL;
-/*
- * Currently we do not know if SRAM is stable on these devices. Maybe someone changes memory in
- * this region and does not care about proper allocation. So check if something might go wrong.
- */
-	if (unlikely(*rtcl_ccu->sram.pmark != RTL_SRAM_MARKER)) {
-		dev_err(&rtcl_ccu->pdev->dev, "SRAM code lost\n");
-		return -EINVAL;
-	}
-
-	tab_idx = (rate - round->min) / round->step;
-	if ((tab_idx < 0) || (tab_idx >= rtab->count) || (rtab->rset[tab_idx].rate != rate))
-		return -EINVAL;
-
-	rtcl_ccu->clks[clk->idx].rate = rate;
-
-	switch (rtcl_ccu->soc) {
-	case SOC_RTL838X:
-		return rtcl_838x_set_rate(clk->idx, &rtab->rset[tab_idx]);
-	case SOC_RTL839X:
-		return rtcl_839x_set_rate(clk->idx, &rtab->rset[tab_idx]);
-	}
-
-	return -ENXIO;
-}
-
-static long rtcl_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate)
-{
-	struct rtcl_clk *clk = rtcl_hw_to_clk(hw);
-	unsigned long rrate = max(clk->min, min(clk->max, rate));
-	const struct rtcl_round_set *round = &rtcl_round_set[rtcl_ccu->soc][clk->idx];
-
-	rrate = ((rrate + (round->step >> 1)) / round->step) * round->step;
-	rrate -= (rrate > clk->max) ? round->step : 0;
-	rrate += (rrate < clk->min) ? round->step : 0;
-
-	return rrate;
-}
-
-/*
- * Initialization functions to register the CCU and its clocks
- */
-
-#define RTCL_SRAM_FUNC(SOC, PBASE, FN) ({				\
-	rtcl_##SOC##_sram_##FN = ((void *)&rtcl_##SOC##_dram_##FN	\
-				- (void *)&rtcl_##SOC##_dram_start)	\
-				+ (void *)PBASE; })
-
-static const struct clk_ops rtcl_clk_ops = {
-	.set_rate = rtcl_set_rate,
-	.round_rate = rtcl_round_rate,
-	.recalc_rate = rtcl_recalc_rate,
-};
-
-static int rtcl_ccu_create(struct device_node *np)
-{
-	int soc;
-
-	if (of_device_is_compatible(np, "realtek,rtl8380-clock"))
-		soc = SOC_RTL838X;
-	else if (of_device_is_compatible(np, "realtek,rtl8390-clock"))
-		soc = SOC_RTL839X;
-	else
-		return -ENXIO;
-
-	rtcl_ccu = kzalloc(sizeof(*rtcl_ccu), GFP_KERNEL);
-	if (IS_ERR(rtcl_ccu))
-		return -ENOMEM;
-
-	rtcl_ccu->np = np;
-	rtcl_ccu->soc = soc;
-	rtcl_ccu->dram.type = RTL_MC_MCR_DRAMTYPE(read_soc(RTL_MC_MCR));
-	rtcl_ccu->dram.buswidth = RTL_MC_DCR_BUSWIDTH(read_soc(RTL_MC_DCR));
-	spin_lock_init(&rtcl_ccu->lock);
-
-	return 0;
-}
-
-int rtcl_register_clkhw(int clk_idx)
-{
-	int ret;
-	struct clk *clk;
-	struct clk_init_data hw_init = { };
-	struct rtcl_clk *rclk = &rtcl_ccu->clks[clk_idx];
-	struct clk_parent_data parent_data = { .fw_name = rtcl_clk_info[clk_idx].parent_name };
-
-	rclk->idx = clk_idx;
-	rclk->hw.init = &hw_init;
-
-	hw_init.num_parents = 1;
-	hw_init.ops = &rtcl_clk_ops;
-	hw_init.parent_data = &parent_data;
-	hw_init.name = rtcl_clk_info[clk_idx].name;
-
-	ret = of_clk_hw_register(rtcl_ccu->np, &rclk->hw);
-	if (ret)
-		return ret;
-
-	clk_hw_register_clkdev(&rclk->hw, rtcl_clk_info[clk_idx].name, NULL);
-
-	clk = clk_get(NULL, rtcl_clk_info[clk_idx].name);
-	rclk->startup = clk_get_rate(clk);
-	clk_put(clk);
-
-	switch (clk_idx) {
-	case CLK_CPU:
-		rclk->min = rtcl_round_set[rtcl_ccu->soc][clk_idx].min;
-		rclk->max = rtcl_round_set[rtcl_ccu->soc][clk_idx].max;
-		break;
-	default:
-/*
- * TODO: This driver supports PLL reclocking and nothing else. Additional required steps for non
- * CPU PLLs are missing. E.g. if we want to change memory clocks the right way we must adapt a lot
- * of other settings like MCR and DTRx timing registers (0xb80001000, 0xb8001008, ...) and initiate
- * a DLL reset so that hardware operates in the allowed limits. This is far too complex without
- * official support. Avoid this for now.
- */
-		rclk->min = rclk->max = rclk->startup;
-		break;
-	}
-
-	return 0;
-}
-
-static struct clk_hw *rtcl_get_clkhw(struct of_phandle_args *clkspec, void *prv)
-{
-	unsigned int idx = clkspec->args[0];
-
-	if (idx >= CLK_COUNT) {
-		pr_err("%s: Invalid index %u\n", __func__, idx);
-		return ERR_PTR(-EINVAL);
-	}
-
-	return &rtcl_ccu->clks[idx].hw;
-}
-
-static int rtcl_ccu_register_clocks(void)
-{
-	int clk_idx, ret;
-
-	for (clk_idx = 0; clk_idx < CLK_COUNT; clk_idx++) {
-		ret = rtcl_register_clkhw(clk_idx);
-		if (ret) {
-			pr_err("%s: Couldn't register %s clock\n",
-				__func__, rtcl_clk_info[clk_idx].display_name);
-			goto err_hw_unregister;
-		}
-	}
-
-	ret = of_clk_add_hw_provider(rtcl_ccu->np, rtcl_get_clkhw, rtcl_ccu);
-	if (ret) {
-		pr_err("%s: Couldn't register clock provider of %s\n",
-			__func__, of_node_full_name(rtcl_ccu->np));
-		goto err_hw_unregister;
-	}
-
-	return 0;
-
-err_hw_unregister:
-	for (--clk_idx; clk_idx >= 0; --clk_idx)
-		clk_hw_unregister(&rtcl_ccu->clks[clk_idx].hw);
-
-	return ret;
-}
-
-int rtcl_init_sram(void)
-{
-	struct gen_pool *sram_pool;
-	phys_addr_t sram_pbase;
-	unsigned long sram_vbase;
-	struct device_node *node;
-	struct platform_device *pdev = NULL;
-	void *dram_start;
-	int dram_size;
-	const char *wrn = ", rate setting disabled.\n";
-
-	switch (rtcl_ccu->soc) {
-	case SOC_RTL838X:
-		dram_start = &rtcl_838x_dram_start;
-		dram_size = rtcl_838x_dram_size;
-		break;
-	case SOC_RTL839X:
-		dram_start = &rtcl_839x_dram_start;
-		dram_size = rtcl_839x_dram_size;
-		break;
-	default:
-		return -ENXIO;
-	}
-
-	for_each_compatible_node(node, NULL, "mmio-sram") {
-		pdev = of_find_device_by_node(node);
-		if (pdev) {
-			of_node_put(node);
-			break;
-		}
-	}
-
-	if (!pdev) {
-		dev_warn(&rtcl_ccu->pdev->dev, "no SRAM device found%s", wrn);
-		return -ENXIO;
-	}
-
-	sram_pool = gen_pool_get(&pdev->dev, NULL);
-	if (!sram_pool) {
-		dev_warn(&rtcl_ccu->pdev->dev, "SRAM pool unavailable%s", wrn);
-		goto err_put_device;
-	}
-
-	sram_vbase = gen_pool_alloc(sram_pool, dram_size);
-	if (!sram_vbase) {
-		dev_warn(&rtcl_ccu->pdev->dev, "can not allocate SRAM%s", wrn);
-		goto err_put_device;
-	}
-
-	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_vbase);
-	memcpy((void *)sram_pbase, dram_start, dram_size);
-	flush_icache_range((unsigned long)sram_pbase, (unsigned long)(sram_pbase + dram_size));
-
-	switch (rtcl_ccu->soc) {
-	case SOC_RTL838X:
-		RTCL_SRAM_FUNC(838x, sram_pbase, set_rate);
-		break;
-	case SOC_RTL839X:
-		RTCL_SRAM_FUNC(839x, sram_pbase, set_rate);
-		break;
-	}
-
-	rtcl_ccu->sram.pmark = (int *)((void *)sram_pbase + (dram_size - 4));
-	rtcl_ccu->sram.vbase = sram_vbase;
-
-	return 0;
-
-err_put_device:
-	put_device(&pdev->dev);
-
-	return -ENXIO;
-}
-
-void rtcl_ccu_log_early(void)
-{
-	int clk_idx;
-	char meminfo[80], clkinfo[255], msg[255] = "rtl83xx-clk: initialized";
-
-	sprintf(meminfo, " (%d Bit DDR%d)", rtcl_ccu->dram.buswidth, rtcl_ccu->dram.type);
-	for (clk_idx = 0; clk_idx < CLK_COUNT; clk_idx++) {
-		sprintf(clkinfo, ", %s %lu MHz", rtcl_clk_info[clk_idx].display_name,
-			rtcl_ccu->clks[clk_idx].startup / 1000000);
-		if (clk_idx == CLK_MEM)
-			strcat(clkinfo, meminfo);
-		strcat(msg, clkinfo);
-	}
-	pr_info("%s\n", msg);
-}
-
-void rtcl_ccu_log_late(void)
-{
-	int clk_idx;
-	struct rtcl_clk *rclk;
-	bool overclock = false;
-	char clkinfo[80], msg[255] = "rate setting enabled";
-
-	for (clk_idx = 0; clk_idx < CLK_COUNT; clk_idx++) {
-		rclk = &rtcl_ccu->clks[clk_idx];
-		overclock |= rclk->max > rclk->startup;
-		sprintf(clkinfo, ", %s %lu-%lu MHz", rtcl_clk_info[clk_idx].display_name,
-			rclk->min / 1000000, rclk->max / 1000000);
-		strcat(msg, clkinfo);
-	}
-	if (overclock)
-		strcat(msg, ", OVERCLOCK AT OWN RISK");
-
-	dev_info(&rtcl_ccu->pdev->dev, "%s\n", msg);
-}
-
-/*
- * Early registration: This module provides core startup clocks that are needed for generic SOC
- * init and for further builtin devices (e.g. UART). Register asap via clock framework.
- */
-
-static void __init rtcl_probe_early(struct device_node *np)
-{
-	if (rtcl_ccu_create(np))
-		return;
-
-	if (rtcl_ccu_register_clocks())
-		kfree(rtcl_ccu);
-	else
-		rtcl_ccu_log_early();
-}
-
-CLK_OF_DECLARE_DRIVER(rtl838x_clk, "realtek,rtl8380-clock", rtcl_probe_early);
-CLK_OF_DECLARE_DRIVER(rtl839x_clk, "realtek,rtl8390-clock", rtcl_probe_early);
-
-/*
- * Late registration: Finally register as normal platform driver. At this point we can make use
- * of other modules like SRAM.
- */
-
-static const struct of_device_id rtcl_dt_ids[] = {
-	{ .compatible = "realtek,rtl8380-clock" },
-	{ .compatible = "realtek,rtl8390-clock" },
-	{}
-};
-
-static int rtcl_probe_late(struct platform_device *pdev)
-{
-	int ret;
-
-	if (!rtcl_ccu) {
-		dev_err(&pdev->dev, "early initialization not run");
-		return -ENXIO;
-	}
-	rtcl_ccu->pdev = pdev;
-	ret = rtcl_init_sram();
-	if (ret)
-		return ret;
-
-	rtcl_ccu_log_late();
-
-	return 0;
-}
-
-static struct platform_driver rtcl_platform_driver = {
-	.driver = {
-		.name = "rtl83xx-clk",
-		.of_match_table = rtcl_dt_ids,
-	},
-	.probe = rtcl_probe_late,
-};
-
-static int __init rtcl_init_subsys(void)
-{
-	return platform_driver_register(&rtcl_platform_driver);
-}
-
-/*
- * The driver does not know when SRAM module has finally loaded. With an arch_initcall() we might
- * overtake SRAM initialization. Be polite and give the system a little more time.
- */
-
-subsys_initcall(rtcl_init_subsys);
diff --git a/target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl83xx.h b/target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl83xx.h
deleted file mode 100644
index a69b16b475eb..000000000000
--- a/target/linux/realtek/files-5.10/drivers/clk/realtek/clk-rtl83xx.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Realtek RTL83XX clock headers
- * Copyright (C) 2022 Markus Stockhausen <markus.stockhausen@gmx.de>
- */
-
-/*
- * Switch registers (e.g. PLL)
- */
-
-#define RTL_SW_CORE_BASE			(0xbb000000)
-
-#define RTL838X_PLL_GLB_CTRL			(0x0fc0)
-#define RTL838X_PLL_CPU_CTRL0			(0x0fc4)
-#define RTL838X_PLL_CPU_CTRL1			(0x0fc8)
-#define RTL838X_PLL_LXB_CTRL0			(0x0fd0)
-#define RTL838X_PLL_LXB_CTRL1			(0x0fd4)
-#define RTL838X_PLL_MEM_CTRL0			(0x0fdc)
-#define RTL838X_PLL_MEM_CTRL1			(0x0fe0)
-
-#define RTL839X_PLL_GLB_CTRL			(0x0024)
-#define RTL839X_PLL_CPU_CTRL0			(0x0028)
-#define RTL839X_PLL_CPU_CTRL1			(0x002c)
-#define RTL839X_PLL_LXB_CTRL0			(0x0038)
-#define RTL839X_PLL_LXB_CTRL1			(0x003c)
-#define RTL839X_PLL_MEM_CTRL0			(0x0048)
-#define RTL839X_PLL_MEM_CTRL1			(0x004c)
-
-#define RTL_PLL_CTRL0_CMU_SEL_PREDIV(v)		(((v) >> 0) & 0x3)
-#define RTL_PLL_CTRL0_CMU_SEL_DIV4(v)		(((v) >> 2) & 0x1)
-#define RTL_PLL_CTRL0_CMU_NCODE_IN(v)		(((v) >> 4) & 0xff)
-#define RTL_PLL_CTRL0_CMU_DIVN2(v)		(((v) >> 12) & 0xff)
-
-#define RTL838X_GLB_CTRL_EN_CPU_PLL_MASK	(1 << 0)
-#define RTL838X_GLB_CTRL_EN_LXB_PLL_MASK	(1 << 1)
-#define RTL838X_GLB_CTRL_EN_MEM_PLL_MASK	(1 << 2)
-#define RTL838X_GLB_CTRL_CPU_PLL_READY_MASK	(1 << 8)
-#define RTL838X_GLB_CTRL_LXB_PLL_READY_MASK	(1 << 9)
-#define RTL838X_GLB_CTRL_MEM_PLL_READY_MASK	(1 << 10)
-#define RTL838X_GLB_CTRL_CPU_PLL_SC_MUX_MASK	(1 << 12)
-
-#define RTL838X_PLL_CTRL1_CMU_DIVN2_SELB(v)	(((v) >> 26) & 0x1)
-#define RTL838X_PLL_CTRL1_CMU_DIVN3_SEL(v)	(((v) >> 27) & 0x3)
-
-#define RTL839X_GLB_CTRL_CPU_CLKSEL_MASK	(1 << 11)
-#define RTL839X_GLB_CTRL_MEM_CLKSEL_MASK	(1 << 12)
-#define RTL839X_GLB_CTRL_LXB_CLKSEL_MASK	(1 << 13)
-
-#define RTL839X_PLL_CTRL1_CMU_DIVN2_SELB(v)	(((v) >> 2) & 0x1)
-#define RTL839X_PLL_CTRL1_CMU_DIVN3_SEL(v)	(((v) >> 0) & 0x3)
-
-/*
- * Core registers (e.g. memory controller)
- */
-
-#define RTL_SOC_BASE				(0xB8000000)
-
-#define RTL_MC_MCR				(0x1000)
-#define RTL_MC_DCR				(0x1004)
-#define RTL_MC_DTR0				(0x1008)
-#define RTL_MC_DTR1				(0x100c)
-#define RTL_MC_DTR2				(0x1010)
-#define RTL_MC_DMCR				(0x101c)
-#define RTL_MC_DACCR				(0x1500)
-#define RTL_MC_DCDR				(0x1060)
-
-#define RTL_MC_MCR_DRAMTYPE(v)			((((v) >> 28) & 0xf) + 1)
-#define RTL_MC_DCR_BUSWIDTH(v)			(8 << (((v) >> 24) & 0xf))
-
-/*
- * Other stuff
- */
-
-#define RTL_SRAM_MARKER				(0x5eaf00d5)
-#define RTL_SRAM_BASE				(0x9f000000)
diff --git a/target/linux/realtek/files-5.10/drivers/clocksource/timer-rtl-otto.c b/target/linux/realtek/files-5.10/drivers/clocksource/timer-rtl-otto.c
deleted file mode 100644
index 0395cf29e5ca..000000000000
--- a/target/linux/realtek/files-5.10/drivers/clocksource/timer-rtl-otto.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/cpu.h>
-#include <linux/cpuhotplug.h>
-#include <linux/interrupt.h>
-#include <linux/sched_clock.h>
-
-#include "timer-of.h"
-
-#define RTTM_DATA		0x0
-#define RTTM_CNT		0x4
-#define RTTM_CTRL		0x8
-#define RTTM_INT		0xc
-
-#define RTTM_CTRL_ENABLE	BIT(28)
-#define RTTM_INT_PENDING	BIT(16)
-#define RTTM_INT_ENABLE		BIT(20)
-
-/*
- * The Otto platform provides multiple 28 bit timers/counters with the following
- * operating logic. If enabled the timer counts up. Per timer one can set a
- * maximum counter value as an end marker. If end marker is reached the timer
- * fires an interrupt. If the timer "overflows" by reaching the end marker or
- * by adding 1 to 0x0fffffff the counter is reset to 0. When this happens and
- * the timer is in operating mode COUNTER it stops. In mode TIMER it will
- * continue to count up.
- */
-
-#define RTTM_CTRL_COUNTER	0
-#define RTTM_CTRL_TIMER		BIT(24)
-
-#define RTTM_BIT_COUNT		28
-#define RTTM_MIN_DELTA		8
-#define RTTM_MAX_DELTA		CLOCKSOURCE_MASK(28)
-
-/*
- * Timers are derived from the LXB clock frequency. Usually this is a fixed
- * multiple of the 25 MHz oscillator. The 930X SOC is an exception from that.
- * Its LXB clock has only dividers and uses the switch PLL of 2.45 GHz as its
- * base. The only meaningful frequencies we can achieve from that are 175.000
- * MHz and 153.125 MHz. The greatest common divisor of all explained possible
- * speeds is 3125000. Pin the timers to this 3.125 MHz reference frequency.
- */
-
-#define RTTM_TICKS_PER_SEC	3125000
-
-struct rttm_cs {
-	struct timer_of		to;
-	struct clocksource	cs;
-};
-
-/*
- * Simple internal register functions
- */
-
-static inline void rttm_set_counter(void __iomem *base, unsigned int counter)
-{
-	iowrite32(counter, base + RTTM_CNT);
-}
-
-static inline unsigned int rttm_get_counter(void __iomem *base)
-{
-	return ioread32(base + RTTM_CNT);
-}
-
-static inline void rttm_set_period(void __iomem *base, unsigned int period)
-{
-	iowrite32(period, base + RTTM_DATA);
-}
-
-static inline void rttm_disable_timer(void __iomem *base)
-{
-	iowrite32(0, base + RTTM_CTRL);
-}
-
-static inline void rttm_enable_timer(void __iomem *base, u32 mode, u32 divisor)
-{
-	iowrite32(RTTM_CTRL_ENABLE | mode | divisor, base + RTTM_CTRL);
-}
-
-static inline void rttm_ack_irq(void __iomem *base)
-{
-	iowrite32(ioread32(base + RTTM_INT) | RTTM_INT_PENDING, base + RTTM_INT);
-}
-
-static inline void rttm_enable_irq(void __iomem *base)
-{
-	iowrite32(RTTM_INT_ENABLE, base + RTTM_INT);
-}
-
-static inline void rttm_disable_irq(void __iomem *base)
-{
-	iowrite32(0, base + RTTM_INT);
-}
-
-/*
- * Aggregated control functions for kernel clock framework
- */
-
-#define RTTM_DEBUG(base)					\
-	pr_debug("------------- %s %d %08x\n", __func__,	\
-	smp_processor_id(), (u32)base)
-
-static irqreturn_t rttm_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *clkevt = dev_id;
-	struct timer_of *to = to_timer_of(clkevt);
-
-	rttm_ack_irq(to->of_base.base);
-	RTTM_DEBUG(to->of_base.base);
-	clkevt->event_handler(clkevt);
-
-	return IRQ_HANDLED;
-}
-
-static void rttm_stop_timer(void __iomem *base)
-{
-	rttm_disable_timer(base);
-	rttm_ack_irq(base);
-}
-
-static void rttm_start_timer(struct timer_of *to, u32 mode)
-{
-	rttm_set_counter(to->of_base.base, 0);
-	rttm_enable_timer(to->of_base.base, mode, to->of_clk.rate / RTTM_TICKS_PER_SEC);
-}
-
-static int rttm_next_event(unsigned long delta, struct clock_event_device *clkevt)
-{
-	struct timer_of *to = to_timer_of(clkevt);
-
-	RTTM_DEBUG(to->of_base.base);
-	rttm_stop_timer(to->of_base.base);
-	rttm_set_period(to->of_base.base, delta);
-	rttm_start_timer(to, RTTM_CTRL_COUNTER);
-
-	return 0;
-}
-
-static int rttm_state_oneshot(struct clock_event_device *clkevt)
-{
-	struct timer_of *to = to_timer_of(clkevt);
-
-	RTTM_DEBUG(to->of_base.base);
-	rttm_stop_timer(to->of_base.base);
-	rttm_set_period(to->of_base.base, RTTM_TICKS_PER_SEC / HZ);
-	rttm_start_timer(to, RTTM_CTRL_COUNTER);
-
-	return 0;
-}
-
-static int rttm_state_periodic(struct clock_event_device *clkevt)
-{
-	struct timer_of *to = to_timer_of(clkevt);
-
-	RTTM_DEBUG(to->of_base.base);
-	rttm_stop_timer(to->of_base.base);
-	rttm_set_period(to->of_base.base, RTTM_TICKS_PER_SEC / HZ);
-	rttm_start_timer(to, RTTM_CTRL_TIMER);
-
-	return 0;
-}
-
-static int rttm_state_shutdown(struct clock_event_device *clkevt)
-{
-	struct timer_of *to = to_timer_of(clkevt);
-
-	RTTM_DEBUG(to->of_base.base);
-	rttm_stop_timer(to->of_base.base);
-
-	return 0;
-}
-
-static void rttm_setup_timer(void __iomem *base)
-{
-	RTTM_DEBUG(base);
-	rttm_stop_timer(base);
-	rttm_set_period(base, 0);
-}
-
-static u64 rttm_read_clocksource(struct clocksource *cs)
-{
-	struct rttm_cs *rcs = container_of(cs, struct rttm_cs, cs);
-
-	return (u64)rttm_get_counter(rcs->to.of_base.base);
-}
-
-/*
- * Module initialization part.
- */
-
-static DEFINE_PER_CPU(struct timer_of, rttm_to) = {
-	.flags				= TIMER_OF_BASE | TIMER_OF_CLOCK | TIMER_OF_IRQ,
-	.of_irq = {
-		.flags			= IRQF_PERCPU | IRQF_TIMER,
-		.handler		= rttm_timer_interrupt,
-	},
-	.clkevt = {
-		.rating			= 400,
-		.features		= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-		.set_state_periodic	= rttm_state_periodic,
-		.set_state_shutdown	= rttm_state_shutdown,
-		.set_state_oneshot	= rttm_state_oneshot,
-		.set_next_event		= rttm_next_event
-	},
-};
-
-static int rttm_enable_clocksource(struct clocksource *cs)
-{
-	struct rttm_cs *rcs = container_of(cs, struct rttm_cs, cs);
-
-	rttm_disable_irq(rcs->to.of_base.base);
-	rttm_setup_timer(rcs->to.of_base.base);
-	rttm_enable_timer(rcs->to.of_base.base, RTTM_CTRL_TIMER,
-			  rcs->to.of_clk.rate / RTTM_TICKS_PER_SEC);
-
-	return 0;
-}
-
-struct rttm_cs rttm_cs = {
-	.to = {
-		.flags	= TIMER_OF_BASE | TIMER_OF_CLOCK,
-	},
-	.cs = {
-		.name	= "realtek_otto_timer",
-		.rating	= 400,
-		.mask	= CLOCKSOURCE_MASK(RTTM_BIT_COUNT),
-		.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-		.read	= rttm_read_clocksource,
-	}
-};
-
-static u64 notrace rttm_read_clock(void)
-{
-	return (u64)rttm_get_counter(rttm_cs.to.of_base.base);
-}
-
-static int rttm_cpu_starting(unsigned int cpu)
-{
-	struct timer_of *to = per_cpu_ptr(&rttm_to, cpu);
-
-	RTTM_DEBUG(to->of_base.base);
-	to->clkevt.cpumask = cpumask_of(cpu);
-	irq_force_affinity(to->of_irq.irq, to->clkevt.cpumask);
-	clockevents_config_and_register(&to->clkevt, RTTM_TICKS_PER_SEC,
-					RTTM_MIN_DELTA, RTTM_MAX_DELTA);
-	rttm_enable_irq(to->of_base.base);
-
-	return 0;
-}
-
-static int __init rttm_probe(struct device_node *np)
-{
-	int cpu, cpu_rollback;
-	struct timer_of *to;
-	int clkidx = num_possible_cpus();
-/*
- * Use the first n timers as per CPU clock event generators
- */
-	for_each_possible_cpu(cpu) {
-		to = per_cpu_ptr(&rttm_to, cpu);
-		to->of_irq.index = to->of_base.index = cpu;
-		if (timer_of_init(np, to)) {
-			pr_err("%s: setup of timer %d failed\n", __func__, cpu);
-			goto rollback;
-		}
-		rttm_setup_timer(to->of_base.base);
-	}
-/*
- * Activate the n'th+1 timer as a stable CPU clocksource.
- */
-	to = &rttm_cs.to;
-	to->of_base.index = clkidx;
-	timer_of_init(np, to);
-	if (rttm_cs.to.of_base.base && rttm_cs.to.of_clk.rate) {
-		rttm_enable_clocksource(&rttm_cs.cs);
-		clocksource_register_hz(&rttm_cs.cs, RTTM_TICKS_PER_SEC);
-		sched_clock_register(rttm_read_clock, RTTM_BIT_COUNT, RTTM_TICKS_PER_SEC);
-	} else
-		pr_err("%s: setup of timer %d as clocksoure failed", __func__, clkidx);
-
-	return cpuhp_setup_state(CPUHP_AP_REALTEK_TIMER_STARTING,
-				"timer/realtek:online",
-				rttm_cpu_starting, NULL);
-rollback:
-	pr_err("%s: timer registration failed\n", __func__);
-	for_each_possible_cpu(cpu_rollback) {
-		if (cpu_rollback == cpu)
-			break;
-		to = per_cpu_ptr(&rttm_to, cpu_rollback);
-		timer_of_cleanup(to);
-	}
-
-	return -EINVAL;
-}
-
-TIMER_OF_DECLARE(otto_timer, "realtek,otto-timer", rttm_probe);
diff --git a/target/linux/realtek/files-5.10/drivers/gpio/gpio-rtl8231.c b/target/linux/realtek/files-5.10/drivers/gpio/gpio-rtl8231.c
deleted file mode 100644
index 368c4fa60fb9..000000000000
--- a/target/linux/realtek/files-5.10/drivers/gpio/gpio-rtl8231.c
+++ /dev/null
@@ -1,355 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/gpio/driver.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-
-/* RTL8231 registers for LED control */
-#define RTL8231_LED_FUNC0			0x0000
-#define RTL8231_LED_FUNC1			0x0001
-#define RTL8231_READY_MASK			0x03f0
-#define RTL8231_READY_VALUE			0x0370
-#define RTL8231_GPIO_PIN_SEL(gpio)		((0x0002) + ((gpio) >> 4))
-#define RTL8231_GPIO_DIR(gpio)			((0x0005) + ((gpio) >> 4))
-#define RTL8231_GPIO_DATA(gpio)			((0x001C) + ((gpio) >> 4))
-
-#define USEC_TIMEOUT 5000
-
-#define RTL8231_SMI_BUS_ID_MAX			0x1F
-
-struct rtl8231_gpios {
-	struct gpio_chip gc;
-	struct device *dev;
-	u32 id;
-	u32 smi_bus_id;
-	u16 reg_shadow[0x20];
-	u32 reg_cached;
-	int ext_gpio_indrt_access;
-};
-
-extern struct rtl83xx_soc_info soc_info;
-
-DEFINE_MUTEX(miim_lock);
-
-static u32 rtl8231_read(struct rtl8231_gpios *gpios, u32 reg)
-{
-	u32 t = 0, n = 0;
-
-	reg &= 0x1f;
-
-	/* Calculate read register address */
-	t = (gpios->smi_bus_id << 2) | (reg << 7);
-
-	/* Set execution bit: cleared when operation completed */
-	t |= 1;
-
-	// Start execution
-	sw_w32(t, gpios->ext_gpio_indrt_access);
-	do {
-		udelay(1);
-		t = sw_r32(gpios->ext_gpio_indrt_access);
-		n++;
-	} while ((t & 1) && (n < USEC_TIMEOUT));
-
-	if (n >= USEC_TIMEOUT)
-		return 0x80000000;
-	
-	pr_debug("%s: %x, %x, %x\n", __func__, gpios->smi_bus_id,
-		reg, (t & 0xffff0000) >> 16);
-
-	return (t & 0xffff0000) >> 16;
-}
-
-static int rtl8231_write(struct rtl8231_gpios *gpios, u32 reg, u32 data)
-{
-	u32 t = 0, n = 0;
-
-	pr_debug("%s: %x, %x, %x\n", __func__, gpios->smi_bus_id, reg, data);
-	reg &= 0x1f;
-
-	t = (gpios->smi_bus_id << 2) | (reg << 7) | (data << 16);
-	/* Set write bit */
-	t |= 2;
-
-	/* Set execution bit: cleared when operation completed */
-	t |= 1;
-
-	// Start execution
-	sw_w32(t, gpios->ext_gpio_indrt_access);
-	do {
-		udelay(1);
-		t = sw_r32(gpios->ext_gpio_indrt_access);
-	} while ((t & 1) && (n < USEC_TIMEOUT));
-
-	if (n >= USEC_TIMEOUT)
-		return -1;
-
-	return 0;
-}
-
-static u32 rtl8231_read_cached(struct rtl8231_gpios *gpios, u32 reg)
-{
-	if (reg > 0x1f)
-		return 0;
-
-	if (gpios->reg_cached & (1 << reg))
-		return gpios->reg_shadow[reg];
-
-	return rtl8231_read(gpios, reg);
-}
-
-/* Set Direction of the RTL8231 pin:
- * dir 1: input
- * dir 0: output
- */
-static int rtl8231_pin_dir(struct rtl8231_gpios *gpios, u32 gpio, u32 dir)
-{
-	u32 v;
-	int pin_sel_addr = RTL8231_GPIO_PIN_SEL(gpio);
-	int pin_dir_addr = RTL8231_GPIO_DIR(gpio);
-	int dpin = gpio % 16;
-
-	if (gpio > 31) {
-		pr_debug("WARNING: HIGH pin\n");
-		dpin += 5;
-		pin_dir_addr = pin_sel_addr;
-	}
-
-	v = rtl8231_read_cached(gpios, pin_dir_addr);
-	if (v & 0x80000000) {
-		pr_err("Error reading RTL8231\n");
-		return -1;
-	}
-
-	v = (v & ~(1 << dpin)) | (dir << dpin);
-	rtl8231_write(gpios, pin_dir_addr, v);
-	gpios->reg_shadow[pin_dir_addr] = v;
-	gpios->reg_cached |= 1 << pin_dir_addr;
-	return 0;
-}
-
-static int rtl8231_pin_dir_get(struct rtl8231_gpios *gpios, u32 gpio, u32 *dir)
-{
-	/* dir 1: input
-	 * dir 0: output
-	 */
-
-	u32  v;
-	int pin_dir_addr = RTL8231_GPIO_DIR(gpio);
-	int pin = gpio % 16;
-
-	if (gpio > 31) {
-		pin_dir_addr = RTL8231_GPIO_PIN_SEL(gpio);
-		pin += 5;
-	}
-
-	v = rtl8231_read(gpios, pin_dir_addr);
-	if (v & (1 << pin))
-		*dir = 1;
-	else
-		*dir = 0;
-	return 0;
-}
-
-static int rtl8231_pin_set(struct rtl8231_gpios *gpios, u32 gpio, u32 data)
-{
-	u32 v = rtl8231_read(gpios, RTL8231_GPIO_DATA(gpio));
-
-	pr_debug("%s: %d to %d\n", __func__, gpio, data);
-	if (v & 0x80000000) {
-		pr_err("Error reading RTL8231\n");
-		return -1;
-	}
-	v = (v & ~(1 << (gpio % 16))) | (data << (gpio % 16));
-	rtl8231_write(gpios, RTL8231_GPIO_DATA(gpio), v);
-	gpios->reg_shadow[RTL8231_GPIO_DATA(gpio)] = v;
-	gpios->reg_cached |= 1 << RTL8231_GPIO_DATA(gpio);
-	return 0;
-}
-
-static int rtl8231_pin_get(struct rtl8231_gpios *gpios, u32 gpio, u16 *state)
-{
-	u32 v = rtl8231_read(gpios, RTL8231_GPIO_DATA(gpio));
-
-	if (v & 0x80000000) {
-		pr_err("Error reading RTL8231\n");
-		return -1;
-	}
-
-	*state = v & 0xffff;
-	return 0;
-}
-
-static int rtl8231_direction_input(struct gpio_chip *gc, unsigned int offset)
-{
-	int err;
-	struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
-
-	pr_debug("%s: %d\n", __func__, offset);
-	mutex_lock(&miim_lock);
-	err = rtl8231_pin_dir(gpios, offset, 1);
-	mutex_unlock(&miim_lock);
-	return err;
-}
-
-static int rtl8231_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
-{
-	int err;
-	struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
-
-	pr_debug("%s: %d\n", __func__, offset);
-	mutex_lock(&miim_lock);
-	err = rtl8231_pin_dir(gpios, offset, 0);
-	mutex_unlock(&miim_lock);
-	if (!err)
-		err = rtl8231_pin_set(gpios, offset, value);
-	return err;
-}
-
-static int rtl8231_get_direction(struct gpio_chip *gc, unsigned int offset)
-{
-	u32 v = 0;
-	struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
-
-	pr_debug("%s: %d\n", __func__, offset);
-	mutex_lock(&miim_lock);
-	rtl8231_pin_dir_get(gpios, offset, &v);
-	mutex_unlock(&miim_lock);
-	return v;
-}
-
-static int rtl8231_gpio_get(struct gpio_chip *gc, unsigned int offset)
-{
-	u16 state = 0;
-	struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
-
-	mutex_lock(&miim_lock);
-	rtl8231_pin_get(gpios, offset, &state);
-	mutex_unlock(&miim_lock);
-	if (state & (1 << (offset % 16)))
-		return 1;
-	return 0;
-}
-
-void rtl8231_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
-{
-	struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
-
-	rtl8231_pin_set(gpios, offset, value);
-}
-
-int rtl8231_init(struct rtl8231_gpios *gpios)
-{
-	u32 ret;
-
-	pr_info("%s called, MDIO bus ID: %d\n", __func__, gpios->smi_bus_id);
-
-	gpios->reg_cached = 0;
-
-	if (soc_info.family == RTL8390_FAMILY_ID) {
-		// RTL8390: Enable external gpio in global led control register
-		sw_w32_mask(0x7 << 18, 0x4 << 18, RTL839X_LED_GLB_CTRL);
-	} else if (soc_info.family == RTL8380_FAMILY_ID) {
-		// RTL8380: Enable RTL8231 indirect access mode
-		sw_w32_mask(0, 1, RTL838X_EXTRA_GPIO_CTRL);
-		sw_w32_mask(3, 1, RTL838X_DMY_REG5);
-	}
-
-	ret = rtl8231_read(gpios, RTL8231_LED_FUNC1);
-	if ((ret & 0x80000000) || ((ret & RTL8231_READY_MASK) != RTL8231_READY_VALUE))
-		return -ENXIO;
-
-	/* Select GPIO functionality and force input direction for pins 0-36 */
-	rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(0), 0xffff);
-	rtl8231_write(gpios, RTL8231_GPIO_DIR(0), 0xffff);
-	rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(16), 0xffff);
-	rtl8231_write(gpios, RTL8231_GPIO_DIR(16), 0xffff);
-	rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(32), 0x03ff);
-
-	/* Set LED_Start to enable drivers for output mode */
-	rtl8231_write(gpios, RTL8231_LED_FUNC0, 1 << 1);
-
-	return 0;
-}
-
-static const struct of_device_id rtl8231_gpio_of_match[] = {
-	{ .compatible = "realtek,rtl8231-gpio" },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, rtl8231_gpio_of_match);
-
-static int rtl8231_gpio_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
-	struct rtl8231_gpios *gpios;
-	int err;
-
-	pr_info("Probing RTL8231 GPIOs\n");
-
-	if (!np) {
-		dev_err(&pdev->dev, "No DT found\n");
-		return -EINVAL;
-	}
-
-	gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL);
-	if (!gpios)
-		return -ENOMEM;
-
-	gpios->id = soc_info.id;
-	if (soc_info.family == RTL8380_FAMILY_ID) {
-		gpios->ext_gpio_indrt_access = RTL838X_EXT_GPIO_INDRT_ACCESS;
-	}
-
-	if (soc_info.family == RTL8390_FAMILY_ID) {
-		gpios->ext_gpio_indrt_access = RTL839X_EXT_GPIO_INDRT_ACCESS;
-	}
-
-	err = of_property_read_u32(np, "indirect-access-bus-id", &gpios->smi_bus_id);
-	if (!err && gpios->smi_bus_id > RTL8231_SMI_BUS_ID_MAX)
-		err = -EINVAL;
-
-	if (err) {
-		dev_err(dev, "invalid or missing indirect-access-bus-id\n");
-		return err;
-	}
-
-	err = rtl8231_init(gpios);
-	if (err) {
-		dev_err(dev, "no device found at bus address %d\n", gpios->smi_bus_id);
-		return err;
-	}
-
-	gpios->dev = dev;
-	gpios->gc.base = -1;
-	gpios->gc.ngpio = 37;
-	gpios->gc.label = "rtl8231";
-	gpios->gc.parent = dev;
-	gpios->gc.owner = THIS_MODULE;
-	gpios->gc.can_sleep = true;
-
-	gpios->gc.direction_input = rtl8231_direction_input;
-	gpios->gc.direction_output = rtl8231_direction_output;
-	gpios->gc.set = rtl8231_gpio_set;
-	gpios->gc.get = rtl8231_gpio_get;
-	gpios->gc.get_direction = rtl8231_get_direction;
-
-	err = devm_gpiochip_add_data(dev, &gpios->gc, gpios);
-	return err;
-}
-
-static struct platform_driver rtl8231_gpio_driver = {
-	.driver = {
-		.name = "rtl8231-gpio",
-		.of_match_table	= rtl8231_gpio_of_match,
-	},
-	.probe = rtl8231_gpio_probe,
-};
-
-module_platform_driver(rtl8231_gpio_driver);
-
-MODULE_DESCRIPTION("Realtek RTL8231 GPIO expansion chip support");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/realtek/files-5.10/drivers/i2c/busses/i2c-rtl9300.c b/target/linux/realtek/files-5.10/drivers/i2c/busses/i2c-rtl9300.c
deleted file mode 100644
index 382dfd40109c..000000000000
--- a/target/linux/realtek/files-5.10/drivers/i2c/busses/i2c-rtl9300.c
+++ /dev/null
@@ -1,488 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/module.h>
-#include <linux/of_platform.h>
-#include "i2c-rtl9300.h"
-
-#define REG(i, x)	(i->base + x + (i->scl_num ? i->mst2_offset : 0))
-#define REG_MASK(i, clear, set, reg)	\
-			writel((readl(REG(i, reg)) & ~(clear)) | (set), REG(i, reg))
-
-struct i2c_drv_data {
-	int scl0_pin;
-	int scl1_pin;
-	int sda0_pin;
-	struct i2c_algorithm *algo;
-	int (*read)(struct rtl9300_i2c *i2c, u8 *buf, int len);
-	int (*write)(struct rtl9300_i2c *i2c, u8 *buf, int len);
-	void (*reg_addr_set)(struct rtl9300_i2c *i2c, u32 reg, u16 len);
-	int (*config_xfer)(struct rtl9300_i2c *i2c, u16 addr, u16 len);
-	int (*execute_xfer)(struct rtl9300_i2c *i2c, char read_write, int size,
-			    union i2c_smbus_data * data, int len);
-	void (*writel)(struct rtl9300_i2c *i2c, u32 data);
-	void (*config_io)(struct rtl9300_i2c *i2c, int scl_num, int sda_num);
-	u32 mst2_offset;
-};
-			
-DEFINE_MUTEX(i2c_lock);
-
-static void rtl9300_i2c_reg_addr_set(struct rtl9300_i2c *i2c, u32 reg, u16 len)
-{
-	// Set register address width
-	REG_MASK(i2c, 0x3 << RTL9300_I2C_CTRL2_MADDR_WIDTH, len << RTL9300_I2C_CTRL2_MADDR_WIDTH,
-		 RTL9300_I2C_CTRL2);
-
-	// Set register address
-	REG_MASK(i2c, 0xffffff << RTL9300_I2C_CTRL1_MEM_ADDR, reg << RTL9300_I2C_CTRL1_MEM_ADDR,
-		 RTL9300_I2C_CTRL1);
-}
-
-static void rtl9310_i2c_reg_addr_set(struct rtl9300_i2c *i2c, u32 reg, u16 len)
-{
-	// Set register address width
-	REG_MASK(i2c, 0x3 << RTL9310_I2C_CTRL_MADDR_WIDTH, len << RTL9310_I2C_CTRL_MADDR_WIDTH,
-		 RTL9310_I2C_CTRL);
-
-	// Set register address
-	writel(reg, REG(i2c, RTL9310_I2C_MEMADDR));
-}
-
-static void rtl9300_i2c_config_io(struct rtl9300_i2c *i2c, int scl_num, int sda_num)
-{
-	u32 v;
-
-	// Set SCL pin
-	REG_MASK(i2c, 0, BIT(RTL9300_I2C_CTRL1_GPIO8_SCL_SEL), RTL9300_I2C_CTRL1);
-
-	// Set SDA pin
-	REG_MASK(i2c, 0x7 << RTL9300_I2C_CTRL1_SDA_OUT_SEL,
-		 i2c->sda_num << RTL9300_I2C_CTRL1_SDA_OUT_SEL, RTL9300_I2C_CTRL1);
-
-	// Set SDA pin to I2C functionality
-	v = readl(i2c->base + RTL9300_I2C_MST_GLB_CTRL);
-	v |= BIT(i2c->sda_num);
-	writel(v, i2c->base + RTL9300_I2C_MST_GLB_CTRL);
-}
-
-static void rtl9310_i2c_config_io(struct rtl9300_i2c *i2c, int scl_num, int sda_num)
-{
-	u32 v;
-
-	// Set SCL pin
-	REG_MASK(i2c, 0, BIT(RTL9310_I2C_MST_IF_SEL_GPIO_SCL_SEL + scl_num), RTL9310_I2C_MST_IF_SEL);
-
-	// Set SDA pin
-	REG_MASK(i2c, 0x7 << RTL9310_I2C_CTRL_SDA_OUT_SEL,
-		 i2c->sda_num << RTL9310_I2C_CTRL_SDA_OUT_SEL, RTL9310_I2C_CTRL);
-
-	// Set SDA pin to I2C functionality
-	v = readl(i2c->base + RTL9310_I2C_MST_IF_SEL);
-	v |= BIT(i2c->sda_num);
-	writel(v, i2c->base + RTL9310_I2C_MST_IF_SEL);
-}
-
-static int rtl9300_i2c_config_xfer(struct rtl9300_i2c *i2c, u16 addr, u16 len)
-{
-	// Set bus frequency
-	REG_MASK(i2c, 0x3 << RTL9300_I2C_CTRL2_SCL_FREQ,
-		 i2c->bus_freq << RTL9300_I2C_CTRL2_SCL_FREQ, RTL9300_I2C_CTRL2);
-
-	// Set slave device address
-	REG_MASK(i2c, 0x7f << RTL9300_I2C_CTRL2_DEV_ADDR,
-		 addr << RTL9300_I2C_CTRL2_DEV_ADDR, RTL9300_I2C_CTRL2);
-
-	// Set data length
-	REG_MASK(i2c, 0xf << RTL9300_I2C_CTRL2_DATA_WIDTH,
-		 ((len - 1) & 0xf) << RTL9300_I2C_CTRL2_DATA_WIDTH, RTL9300_I2C_CTRL2);
-
-	// Set read mode to random
-	REG_MASK(i2c, 0x1 << RTL9300_I2C_CTRL2_READ_MODE, 0, RTL9300_I2C_CTRL2);
-
-	return 0;
-}
-
-static int rtl9310_i2c_config_xfer(struct rtl9300_i2c *i2c, u16 addr, u16 len)
-{
-	// Set bus frequency
-	REG_MASK(i2c, 0x3 << RTL9310_I2C_CTRL_SCL_FREQ,
-		 i2c->bus_freq << RTL9310_I2C_CTRL_SCL_FREQ, RTL9310_I2C_CTRL);
-
-	// Set slave device address
-	REG_MASK(i2c, 0x7f << RTL9310_I2C_CTRL_DEV_ADDR,
-		 addr << RTL9310_I2C_CTRL_DEV_ADDR, RTL9310_I2C_CTRL);
-
-	// Set data length
-	REG_MASK(i2c, 0xf << RTL9310_I2C_CTRL_DATA_WIDTH,
-		 ((len - 1) & 0xf) << RTL9310_I2C_CTRL_DATA_WIDTH, RTL9310_I2C_CTRL);
-
-	// Set read mode to random
-	REG_MASK(i2c, 0x1 << RTL9310_I2C_CTRL_READ_MODE, 0, RTL9310_I2C_CTRL);
-
-	return 0;
-}
-
-static int i2c_read(void __iomem *r0, u8 *buf, int len)
-{
-	int i;
-	u32 v;
-
-	if (len > 16)
-		return -EIO;
-
-	for (i = 0; i < len; i++) {
-		if (i % 4 == 0)
-			v = readl(r0 + i);
-		buf[i] = v;
-		v >>= 8;
-	}
-
-	return len;
-}
-
-static int i2c_write(void __iomem *r0, u8 *buf, int len)
-{
-	u32 v;
-	int i;
-
-	if (len > 16)
-		return -EIO;
-
-	for (i = 0; i < len; i++) {
-		if (! (i % 4))
-			v = 0;
-		v <<= 8;
-		v |= buf[i];
-		if (i % 4 == 3 || i == len - 1)
-			writel(v, r0 + (i / 4) * 4);
-	}
-
-	return len;
-}
-
-static int rtl9300_i2c_read(struct rtl9300_i2c *i2c, u8 *buf, int len)
-{
-	return i2c_read(REG(i2c, RTL9300_I2C_DATA_WORD0), buf, len);
-}
-
-static int rtl9300_i2c_write(struct rtl9300_i2c *i2c, u8 *buf, int len)
-{
-	return i2c_write(REG(i2c, RTL9300_I2C_DATA_WORD0), buf, len);
-}
-
-static int rtl9310_i2c_read(struct rtl9300_i2c *i2c, u8 *buf, int len)
-{
-	return i2c_read(REG(i2c, RTL9310_I2C_DATA), buf, len);
-}
-
-static int rtl9310_i2c_write(struct rtl9300_i2c *i2c, u8 *buf, int len)
-{
-	return i2c_write(REG(i2c, RTL9310_I2C_DATA), buf, len);
-}
-
-static void rtl9300_writel(struct rtl9300_i2c *i2c, u32 data)
-{
-	writel(data, REG(i2c, RTL9300_I2C_DATA_WORD0));
-}
-
-static void rtl9310_writel(struct rtl9300_i2c *i2c, u32 data)
-{
-	writel(data, REG(i2c, RTL9310_I2C_DATA));
-}
-
-
-static int rtl9300_execute_xfer(struct rtl9300_i2c *i2c, char read_write,
-				int size, union i2c_smbus_data * data, int len)
-{
-	u32 v;
-
-	if (read_write == I2C_SMBUS_READ)
-		REG_MASK(i2c, BIT(RTL9300_I2C_CTRL1_RWOP), 0, RTL9300_I2C_CTRL1);
-	else
-		REG_MASK(i2c, 0, BIT(RTL9300_I2C_CTRL1_RWOP), RTL9300_I2C_CTRL1);
-
-	REG_MASK(i2c, 0, BIT(RTL9300_I2C_CTRL1_I2C_TRIG), RTL9300_I2C_CTRL1);
-	do {
-		v = readl(REG(i2c, RTL9300_I2C_CTRL1));
-	} while (v & BIT(RTL9300_I2C_CTRL1_I2C_TRIG));
-
-	if (v & BIT(RTL9300_I2C_CTRL1_I2C_FAIL))
-		return -EIO;
-
-	if (read_write == I2C_SMBUS_READ) {
-		if (size == I2C_SMBUS_BYTE || size == I2C_SMBUS_BYTE_DATA){
-			data->byte = readl(REG(i2c, RTL9300_I2C_DATA_WORD0));
-		} else if (size == I2C_SMBUS_WORD_DATA) {
-			data->word = readl(REG(i2c, RTL9300_I2C_DATA_WORD0));
-		} else if (len > 0) {
-			rtl9300_i2c_read(i2c, &data->block[0], len);
-		}
-	}
-
-	return 0;
-}
-
-static int rtl9310_execute_xfer(struct rtl9300_i2c *i2c, char read_write,
-				int size, union i2c_smbus_data * data, int len)
-{
-	u32 v;
-
-	if (read_write == I2C_SMBUS_READ)
-		REG_MASK(i2c, BIT(RTL9310_I2C_CTRL_RWOP), 0, RTL9310_I2C_CTRL);
-	else
-		REG_MASK(i2c, 0, BIT(RTL9310_I2C_CTRL_RWOP), RTL9310_I2C_CTRL);
-
-	REG_MASK(i2c, 0, BIT(RTL9310_I2C_CTRL_I2C_TRIG), RTL9310_I2C_CTRL);
-	do {
-		v = readl(REG(i2c, RTL9310_I2C_CTRL));
-	} while (v & BIT(RTL9310_I2C_CTRL_I2C_TRIG));
-
-	if (v & BIT(RTL9310_I2C_CTRL_I2C_FAIL))
-		return -EIO;
-
-	if (read_write == I2C_SMBUS_READ) {
-		if (size == I2C_SMBUS_BYTE || size == I2C_SMBUS_BYTE_DATA){
-			data->byte = readl(REG(i2c, RTL9310_I2C_DATA));
-		} else if (size == I2C_SMBUS_WORD_DATA) {
-			data->word = readl(REG(i2c, RTL9310_I2C_DATA));
-		} else if (len > 0) {
-			rtl9310_i2c_read(i2c, &data->block[0], len);
-		}
-	}
-
-	return 0;
-}
-
-static int rtl9300_i2c_smbus_xfer(struct i2c_adapter * adap, u16 addr,
-		  unsigned short flags, char read_write,
-		  u8 command, int size, union i2c_smbus_data * data)
-{
-	struct rtl9300_i2c *i2c = i2c_get_adapdata(adap);
-	struct i2c_drv_data *drv_data = (struct i2c_drv_data *)device_get_match_data(i2c->dev);
-	int len = 0, ret;
-
-	mutex_lock(&i2c_lock);
-	switch (size) {
-	case I2C_SMBUS_QUICK:
-		drv_data->config_xfer(i2c, addr, 0);
-		drv_data->reg_addr_set(i2c, 0, 0);
-		break;
-
-	case I2C_SMBUS_BYTE:
-		if (read_write == I2C_SMBUS_WRITE) {
-			drv_data->config_xfer(i2c, addr, 0);
-			drv_data->reg_addr_set(i2c, command, 1);
-		} else {
-			drv_data->config_xfer(i2c, addr, 1);
-			drv_data->reg_addr_set(i2c, 0, 0);
-		}
-		break;
-
-	case I2C_SMBUS_BYTE_DATA:
-		pr_debug("I2C_SMBUS_BYTE_DATA %02x, read %d cmd %02x\n", addr, read_write, command);
-		drv_data->reg_addr_set(i2c, command, 1);
-		drv_data->config_xfer(i2c, addr, 1);
-
-		if (read_write == I2C_SMBUS_WRITE) {
-			pr_debug("--> data %02x\n", data->byte);
-			drv_data->writel(i2c, data->byte);
-		}
-		break;
-
-	case I2C_SMBUS_WORD_DATA:
-		pr_debug("I2C_SMBUS_WORD %02x, read %d\n", addr, read_write);
-		drv_data->reg_addr_set(i2c, command, 1);
-		drv_data->config_xfer(i2c, addr, 2);
-		if (read_write == I2C_SMBUS_WRITE)
-			drv_data->writel(i2c, data->word);
-		break;
-
-	case I2C_SMBUS_BLOCK_DATA:
-		pr_debug("I2C_SMBUS_BLOCK_DATA %02x, read %d, len %d\n",
-			addr, read_write, data->block[0]);
-		drv_data->reg_addr_set(i2c, command, 1);
-		drv_data->config_xfer(i2c, addr, data->block[0]);
-		if (read_write == I2C_SMBUS_WRITE)
-			drv_data->write(i2c, &data->block[1], data->block[0]);
-		len = data->block[0];
-		break;
-
-	default:
-		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
-		return -EOPNOTSUPP;
-	}
-
-	ret = drv_data->execute_xfer(i2c, read_write, size, data, len);
-
-	mutex_unlock(&i2c_lock);
-
-	return ret;
-}
-
-static u32 rtl9300_i2c_func(struct i2c_adapter *a)
-{
-	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-	       I2C_FUNC_SMBUS_BLOCK_DATA;
-}
-
-static const struct i2c_algorithm rtl9300_i2c_algo = {
-	.smbus_xfer	= rtl9300_i2c_smbus_xfer,
-	.functionality	= rtl9300_i2c_func,
-};
-
-struct i2c_adapter_quirks rtl9300_i2c_quirks = {
-	.flags		= I2C_AQ_NO_CLK_STRETCH,
-	.max_read_len	= 16,
-	.max_write_len	= 16,
-};
-
-static int rtl9300_i2c_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct rtl9300_i2c *i2c;
-	struct i2c_adapter *adap;
-	struct i2c_drv_data *drv_data;
-	struct device_node *node = pdev->dev.of_node;
-	u32 clock_freq, pin;
-	int ret = 0;
-
-	pr_info("%s probing I2C adapter\n", __func__);
-	
-	if (!node) {
-		dev_err(i2c->dev, "No DT found\n");
-		return -EINVAL;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	drv_data = (struct i2c_drv_data *) device_get_match_data(&pdev->dev);
-
-	i2c = devm_kzalloc(&pdev->dev, sizeof(struct rtl9300_i2c), GFP_KERNEL);
-	if (!i2c)
-		return -ENOMEM;
-
-	i2c->base = devm_ioremap_resource(&pdev->dev, res);
-	i2c->mst2_offset = drv_data->mst2_offset;
-	if (IS_ERR(i2c->base))
-		return PTR_ERR(i2c->base);
-
-	pr_debug("%s base memory %08x\n", __func__, (u32)i2c->base);
-	i2c->dev = &pdev->dev;
-
-	if (of_property_read_u32(node, "clock-frequency", &clock_freq)) {
-		clock_freq = I2C_MAX_STANDARD_MODE_FREQ;
-	}
-	switch(clock_freq) {
-	case I2C_MAX_STANDARD_MODE_FREQ:
-		i2c->bus_freq = RTL9300_I2C_STD_FREQ;
-		break;
-	
-	case I2C_MAX_FAST_MODE_FREQ:
-		i2c->bus_freq = RTL9300_I2C_FAST_FREQ;
-		break;
-	default:
-		dev_warn(i2c->dev, "clock-frequency %d not supported\n", clock_freq);
-		return -EINVAL;
-	}
-
-	dev_info(&pdev->dev, "SCL speed %d, mode is %d\n", clock_freq, i2c->bus_freq);
-
-	if (of_property_read_u32(node, "scl-pin", &pin)) {
-		dev_warn(i2c->dev, "SCL pin not found in DT, using default\n");
-		pin = drv_data->scl0_pin;
-	}
-	if (!(pin == drv_data->scl0_pin || pin == drv_data->scl1_pin)) {
-		dev_warn(i2c->dev, "SCL pin %d not supported\n", pin);
-		return -EINVAL;
-	}
-	i2c->scl_num = pin == drv_data->scl0_pin ? 0 : 1;
-	pr_info("%s scl_num %d\n", __func__, i2c->scl_num);
-
-	if (of_property_read_u32(node, "sda-pin", &pin)) {
-		dev_warn(i2c->dev, "SDA pin not found in DT, using default \n");
-		pin = drv_data->sda0_pin;
-	}
-	i2c->sda_num = pin - drv_data->sda0_pin;
-	if (i2c->sda_num < 0 || i2c->sda_num > 7) {
-		dev_warn(i2c->dev, "SDA pin %d not supported\n", pin);
-		return -EINVAL;
-	}
-	pr_info("%s sda_num %d\n", __func__, i2c->sda_num);
-
-	adap = &i2c->adap;
-	adap->owner = THIS_MODULE;
-	adap->algo = &rtl9300_i2c_algo;
-	adap->retries = 3;
-	adap->dev.parent = &pdev->dev;
-	i2c_set_adapdata(adap, i2c);
-	adap->dev.of_node = node;
-	strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
-
-	platform_set_drvdata(pdev, i2c);
-
-	drv_data->config_io(i2c, i2c->scl_num, i2c->sda_num);
-
-	ret = i2c_add_adapter(adap);
-
-	return ret;
-}
-
-static int rtl9300_i2c_remove(struct platform_device *pdev)
-{
-	struct rtl9300_i2c *i2c = platform_get_drvdata(pdev);
-
-	i2c_del_adapter(&i2c->adap);
-
-	return 0;
-}
-
-struct i2c_drv_data rtl9300_i2c_drv_data = {
-	.scl0_pin = 8,
-	.scl1_pin = 17,
-	.sda0_pin = 9,
-	.read = rtl9300_i2c_read,
-	.read = rtl9300_i2c_write,
-	.reg_addr_set = rtl9300_i2c_reg_addr_set,
-	.config_xfer = rtl9300_i2c_config_xfer,
-	.execute_xfer = rtl9300_execute_xfer,
-	.writel = rtl9300_writel,
-	.config_io = rtl9300_i2c_config_io,
-	.mst2_offset = 0x1c,
-};
-
-struct i2c_drv_data rtl9310_i2c_drv_data = {
-	.scl0_pin = 13, 
-	.scl1_pin = 14,
-	.sda0_pin = 0,
-	.read = rtl9310_i2c_read,
-	.read = rtl9310_i2c_write,
-	.reg_addr_set = rtl9310_i2c_reg_addr_set,
-	.config_xfer = rtl9310_i2c_config_xfer,
-	.execute_xfer = rtl9310_execute_xfer,
-	.writel = rtl9310_writel,
-	.config_io = rtl9310_i2c_config_io,
-	.mst2_offset = 0x18,
-};
-
-static const struct of_device_id i2c_rtl9300_dt_ids[] = {
-	{ .compatible = "realtek,rtl9300-i2c", .data = (void *) &rtl9300_i2c_drv_data },
-	{ .compatible = "realtek,rtl9310-i2c", .data = (void *) &rtl9310_i2c_drv_data },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, rtl838x_eth_of_ids);
-
-static struct platform_driver rtl9300_i2c_driver = {
-	.probe		= rtl9300_i2c_probe,
-	.remove		= rtl9300_i2c_remove,
-	.driver		= {
-		.name	= "i2c-rtl9300",
-		.pm 	= NULL,
-		.of_match_table = i2c_rtl9300_dt_ids,
-	},
-};
-
-module_platform_driver(rtl9300_i2c_driver);
-
-MODULE_AUTHOR("Birger Koblitz");
-MODULE_DESCRIPTION("RTL9300 I2C host driver");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/realtek/files-5.10/drivers/i2c/busses/i2c-rtl9300.h b/target/linux/realtek/files-5.10/drivers/i2c/busses/i2c-rtl9300.h
deleted file mode 100644
index b10c38c91ca2..000000000000
--- a/target/linux/realtek/files-5.10/drivers/i2c/busses/i2c-rtl9300.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef I2C_RTL9300_H
-#define I2C_RTL9300_H
-
-#include <linux/i2c.h>
-
-#define RTL9300_I2C_CTRL1			0x00
-#define RTL9300_I2C_CTRL1_MEM_ADDR		8
-#define RTL9300_I2C_CTRL1_SDA_OUT_SEL		4
-#define RTL9300_I2C_CTRL1_GPIO8_SCL_SEL		3
-#define RTL9300_I2C_CTRL1_RWOP			2
-#define RTL9300_I2C_CTRL1_I2C_FAIL		1
-#define RTL9300_I2C_CTRL1_I2C_TRIG		0
-
-#define RTL9300_I2C_CTRL2			0x04
-#define RTL9300_I2C_CTRL2_DRIVE_ACK_DELAY	20
-#define RTL9300_I2C_CTRL2_CHECK_ACK_DELAY	16
-#define RTL9300_I2C_CTRL2_READ_MODE		15
-#define RTL9300_I2C_CTRL2_DEV_ADDR		8
-#define RTL9300_I2C_CTRL2_DATA_WIDTH		4
-#define RTL9300_I2C_CTRL2_MADDR_WIDTH		2
-#define RTL9300_I2C_CTRL2_SCL_FREQ		0
-
-#define RTL9300_I2C_DATA_WORD0			0x08
-
-#define RTL9300_I2C_MST_GLB_CTRL		0x18
-
-#define RTL9310_I2C_MST_IF_CTRL			0x00
-
-#define RTL9310_I2C_MST_IF_SEL			0x04
-#define RTL9310_I2C_MST_IF_SEL_GPIO_SCL_SEL	12
-
-#define RTL9310_I2C_CTRL			0x08
-#define RTL9310_I2C_CTRL_SCL_FREQ		30
-#define RTL9310_I2C_CTRL_CHECK_ACK_DELAY	26
-#define RTL9310_I2C_CTRL_DRIVE_ACK_DELAY	22
-#define RTL9310_I2C_CTRL_SDA_OUT_SEL		18
-#define RTL9310_I2C_CTRL_DEV_ADDR		11
-#define RTL9310_I2C_CTRL_MADDR_WIDTH		9
-#define RTL9310_I2C_CTRL_DATA_WIDTH		5
-#define RTL9310_I2C_CTRL_READ_MODE		4
-#define RTL9310_I2C_CTRL_RWOP			2
-#define RTL9310_I2C_CTRL_I2C_FAIL		1
-#define RTL9310_I2C_CTRL_I2C_TRIG		0
-
-#define RTL9310_I2C_MEMADDR			0x0c
-
-#define RTL9310_I2C_DATA			0x10
-
-#define RTL9300_I2C_STD_FREQ		0
-#define RTL9300_I2C_FAST_FREQ		1
-
-struct rtl9300_i2c {
-	void __iomem *base;
-	u32 mst2_offset;
-	struct device *dev;
-	struct i2c_adapter adap;
-	u8 bus_freq;
-	u8 sda_num;			// SDA channel number
-	u8 scl_num;			// SCL channel, mapping to master 1 or 2
-};
-
-#endif
diff --git a/target/linux/realtek/files-5.10/drivers/i2c/muxes/i2c-mux-rtl9300.c b/target/linux/realtek/files-5.10/drivers/i2c/muxes/i2c-mux-rtl9300.c
deleted file mode 100644
index 2f45b0a3ccba..000000000000
--- a/target/linux/realtek/files-5.10/drivers/i2c/muxes/i2c-mux-rtl9300.c
+++ /dev/null
@@ -1,293 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * I2C multiplexer for the 2 I2C Masters of the RTL9300
- * with up to 8 channels each, but which are not entirely
- * independent of each other
- */
-#include <linux/i2c-mux.h>
-#include <linux/module.h>
-#include <linux/mux/consumer.h>
-#include <linux/of_device.h>
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-
-#include "../busses/i2c-rtl9300.h"
-
-#define NUM_MASTERS		2
-#define NUM_BUSSES		8
-
-#define REG(mst, x)	(mux->base + x + (mst ? mux->i2c->mst2_offset : 0))
-#define REG_MASK(mst, clear, set, reg)	\
-			writel((readl(REG((mst),(reg))) & ~(clear)) | (set), REG((mst),(reg)))
-
-struct channel {
-	u8 sda_num;
-	u8 scl_num;
-};
-
-static struct channel channels[NUM_MASTERS * NUM_BUSSES];
-
-struct rtl9300_mux {
-	void __iomem *base;
-	struct device *dev;
-	struct i2c_adapter *parent;
-	struct rtl9300_i2c * i2c;
-};
-
-struct i2c_mux_data  {
-	int scl0_pin;
-	int scl1_pin;
-	int sda0_pin;
-	int sda_pins;
-	int (*i2c_mux_select)(struct i2c_mux_core *muxc, u32 chan);
-	int (*i2c_mux_deselect)(struct i2c_mux_core *muxc, u32 chan);
-	void (*sda_sel)(struct i2c_mux_core *muxc, int pin);
-};
-
-static int rtl9300_i2c_mux_select(struct i2c_mux_core *muxc, u32 chan)
-{
-	struct rtl9300_mux *mux = i2c_mux_priv(muxc);
-
-	// Set SCL pin
-	REG_MASK(channels[chan].scl_num, 0,
-		 BIT(RTL9300_I2C_CTRL1_GPIO8_SCL_SEL), RTL9300_I2C_CTRL1);
-
-	// Set SDA pin
-	REG_MASK(channels[chan].scl_num, 0x7 << RTL9300_I2C_CTRL1_SDA_OUT_SEL,
-		 channels[chan].sda_num << RTL9300_I2C_CTRL1_SDA_OUT_SEL, RTL9300_I2C_CTRL1);
-
-	mux->i2c->sda_num = channels[chan].sda_num;
-	mux->i2c->scl_num = channels[chan].scl_num;
-
-	return 0;
-}
-
-static int rtl9310_i2c_mux_select(struct i2c_mux_core *muxc, u32 chan)
-{
-	struct rtl9300_mux *mux = i2c_mux_priv(muxc);
-
-	// Set SCL pin
-	REG_MASK(0, 0, BIT(RTL9310_I2C_MST_IF_SEL_GPIO_SCL_SEL + channels[chan].scl_num),
-		 RTL9310_I2C_MST_IF_SEL);
-
-	// Set SDA pin
-	REG_MASK(channels[chan].scl_num, 0xf << RTL9310_I2C_CTRL_SDA_OUT_SEL,
-		 channels[chan].sda_num << RTL9310_I2C_CTRL_SDA_OUT_SEL, RTL9310_I2C_CTRL);
-
-	mux->i2c->sda_num = channels[chan].sda_num;
-	mux->i2c->scl_num = channels[chan].scl_num;
-
-	return 0;
-}
-
-static int rtl9300_i2c_mux_deselect(struct i2c_mux_core *muxc, u32 chan)
-{
-	return 0;
-}
-
-static void rtl9300_sda_sel(struct i2c_mux_core *muxc, int pin)
-{
-	struct rtl9300_mux *mux = i2c_mux_priv(muxc);
-	u32 v;
-
-	// Set SDA pin to I2C functionality
-	v = readl(REG(0, RTL9300_I2C_MST_GLB_CTRL));
-	v |= BIT(pin);
-	writel(v, REG(0, RTL9300_I2C_MST_GLB_CTRL));
-}
-
-static void rtl9310_sda_sel(struct i2c_mux_core *muxc, int pin)
-{
-	struct rtl9300_mux *mux = i2c_mux_priv(muxc);
-	u32 v;
-
-	// Set SDA pin to I2C functionality
-	v = readl(REG(0, RTL9310_I2C_MST_IF_SEL));
-	v |= BIT(pin);
-	writel(v, REG(0, RTL9310_I2C_MST_IF_SEL));
-}
-
-static struct device_node *mux_parent_adapter(struct device *dev, struct rtl9300_mux *mux)
-{
-	struct device_node *node = dev->of_node;
-	struct device_node *parent_np;
-	struct i2c_adapter *parent;
-
-	parent_np = of_parse_phandle(node, "i2c-parent", 0);
-	if (!parent_np) {
-		dev_err(dev, "Cannot parse i2c-parent\n");
-		return ERR_PTR(-ENODEV);
-	}
-	parent = of_find_i2c_adapter_by_node(parent_np);
-	of_node_put(parent_np);
-	if (!parent)
-		return ERR_PTR(-EPROBE_DEFER);
-
-	if (!(of_device_is_compatible(parent_np, "realtek,rtl9300-i2c")
-		|| of_device_is_compatible(parent_np, "realtek,rtl9310-i2c"))){
-		dev_err(dev, "I2C parent not an RTL9300 I2C controller\n");
-		return ERR_PTR(-ENODEV);
-	}
-
-	mux->parent = parent;
-	mux->i2c = (struct rtl9300_i2c *)i2c_get_adapdata(parent);
-	mux->base = mux->i2c->base;
-
-	return parent_np;
-}
-
-struct i2c_mux_data rtl9300_i2c_mux_data = {
-	.scl0_pin = 8,
-	.scl1_pin = 17,
-	.sda0_pin = 9,
-	.sda_pins = 8,
-	.i2c_mux_select = rtl9300_i2c_mux_select,
-	.i2c_mux_deselect = rtl9300_i2c_mux_deselect,
-	.sda_sel = rtl9300_sda_sel,
-};
-
-struct i2c_mux_data rtl9310_i2c_mux_data = {
-	.scl0_pin = 13, 
-	.scl1_pin = 14,
-	.sda0_pin = 0,
-	.sda_pins = 16,
-	.i2c_mux_select = rtl9310_i2c_mux_select,
-	.i2c_mux_deselect = rtl9300_i2c_mux_deselect,
-	.sda_sel = rtl9310_sda_sel,
-};
-
-static const struct of_device_id rtl9300_i2c_mux_of_match[] = {
-	{ .compatible = "realtek,i2c-mux-rtl9300", .data = (void *) &rtl9300_i2c_mux_data},
-	{ .compatible = "realtek,i2c-mux-rtl9310", .data = (void *) &rtl9310_i2c_mux_data},
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, rtl9300_i2c_mux_of_match);
-
-static int rtl9300_i2c_mux_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct device_node *node = dev->of_node;
-	struct device_node *parent_np;
-	struct device_node *child;
-	struct i2c_mux_core *muxc;
-	struct rtl9300_mux *mux;
-	struct i2c_mux_data *mux_data;
-	int children;
-	int ret;
-
-	pr_info("%s probing I2C adapter\n", __func__);
-	
-	if (!node) {
-		dev_err(dev, "No DT found\n");
-		return -EINVAL;
-	}
-
-	mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
-	if (!mux)
-		return -ENOMEM;
-
-	mux->dev = dev;
-
-	mux_data = (struct i2c_mux_data *) device_get_match_data(dev);
-
-	parent_np = mux_parent_adapter(dev, mux);
-	if (IS_ERR(parent_np))
-		return dev_err_probe(dev, PTR_ERR(parent_np), "i2c-parent adapter not found\n");
-
-	pr_info("%s base memory %08x\n", __func__, (u32)mux->base);
-
-	children = of_get_child_count(node);
-
-	muxc = i2c_mux_alloc(mux->parent, dev, children, 0, 0,
-			     mux_data->i2c_mux_select, mux_data->i2c_mux_deselect);
-	if (!muxc) {
-		ret = -ENOMEM;
-		goto err_parent;
-	}
-	muxc->priv = mux;
-
-	platform_set_drvdata(pdev, muxc);
-
-	for_each_child_of_node(node, child) {
-		u32 chan;
-		u32 pin;
-
-		ret = of_property_read_u32(child, "reg", &chan);
-		if (ret < 0) {
-			dev_err(dev, "no reg property for node '%pOFn'\n",
-				child);
-			goto err_children;
-		}
-
-		if (chan >= NUM_MASTERS * NUM_BUSSES) {
-			dev_err(dev, "invalid reg %u\n", chan);
-			ret = -EINVAL;
-			goto err_children;
-		}
-
-		if (of_property_read_u32(child, "scl-pin", &pin)) {
-			dev_warn(dev, "SCL pin not found in DT, using default\n");
-			pin = mux_data->scl0_pin;
-		}
-		if (!(pin == mux_data->scl0_pin || pin == mux_data->scl1_pin)) {
-			dev_warn(dev, "SCL pin %d not supported\n", pin);
-			ret = -EINVAL;
-			goto err_children;
-		}
-		channels[chan].scl_num = pin == mux_data->scl0_pin ? 0 : 1;
-		pr_info("%s channel %d scl_num %d\n", __func__, chan, channels[chan].scl_num);
-
-		if (of_property_read_u32(child, "sda-pin", &pin)) {
-			dev_warn(dev, "SDA pin not found in DT, using default \n");
-			pin = mux_data->sda0_pin;
-		}
-		channels[chan].sda_num = pin - mux_data->sda0_pin;
-		if (channels[chan].sda_num < 0 || channels[chan].sda_num >= mux_data->sda_pins) {
-			dev_warn(dev, "SDA pin %d not supported\n", pin);
-			return -EINVAL;
-		}
-		pr_info("%s channel %d sda_num %d\n", __func__, chan, channels[chan].sda_num);
-
-		mux_data->sda_sel(muxc, channels[chan].sda_num);
-
-		ret = i2c_mux_add_adapter(muxc, 0, chan, 0);
-		if (ret)
-			goto err_children;
-	}
-
-	dev_info(dev, "%d-port mux on %s adapter\n", children, mux->parent->name);
-
-	return 0;
-
-err_children:
-	i2c_mux_del_adapters(muxc);
-err_parent:
-	i2c_put_adapter(mux->parent);
-
-	return ret;
-}
-
-static int rtl9300_i2c_mux_remove(struct platform_device *pdev)
-{
-	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
-
-	i2c_mux_del_adapters(muxc);
-	i2c_put_adapter(muxc->parent);
-
-	return 0;
-}
-
-static struct platform_driver i2c_mux_driver = {
-	.probe	= rtl9300_i2c_mux_probe,
-	.remove	= rtl9300_i2c_mux_remove,
-	.driver	= {
-		.name	= "i2c-mux-rtl9300",
-		.of_match_table = rtl9300_i2c_mux_of_match,
-	},
-};
-module_platform_driver(i2c_mux_driver);
-
-MODULE_DESCRIPTION("RTL9300 I2C multiplexer driver");
-MODULE_AUTHOR("Birger Koblitz");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/Kconfig b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/Kconfig
deleted file mode 100644
index 281f08054faa..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config NET_DSA_RTL83XX
-	tristate "Realtek RTL838x/RTL839x switch support"
-	depends on RTL83XX
-	select NET_DSA_TAG_TRAILER
-	help
-	  This driver adds support for Realtek RTL83xx series switching.
-
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/Makefile b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/Makefile
deleted file mode 100644
index 8752c797004d..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_NET_DSA_RTL83XX)	+= common.o dsa.o \
-	rtl838x.o rtl839x.o rtl930x.o rtl931x.o debugfs.o qos.o tc.o
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c
deleted file mode 100644
index d2d677230010..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c
+++ /dev/null
@@ -1,1708 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/of_mdio.h>
-#include <linux/of_platform.h>
-#include <net/arp.h>
-#include <net/nexthop.h>
-#include <net/neighbour.h>
-#include <net/netevent.h>
-#include <linux/inetdevice.h>
-#include <linux/rhashtable.h>
-#include <linux/of_net.h>
-
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-#include "rtl83xx.h"
-
-extern struct rtl83xx_soc_info soc_info;
-
-extern const struct rtl838x_reg rtl838x_reg;
-extern const struct rtl838x_reg rtl839x_reg;
-extern const struct rtl838x_reg rtl930x_reg;
-extern const struct rtl838x_reg rtl931x_reg;
-
-extern const struct dsa_switch_ops rtl83xx_switch_ops;
-extern const struct dsa_switch_ops rtl930x_switch_ops;
-
-DEFINE_MUTEX(smi_lock);
-
-int rtl83xx_port_get_stp_state(struct rtl838x_switch_priv *priv, int port)
-{
-	u32 msti = 0;
-	u32 port_state[4];
-	int index, bit;
-	int pos = port;
-	int n = priv->port_width << 1;
-
-	/* Ports above or equal CPU port can never be configured */
-	if (port >= priv->cpu_port)
-		return -1;
-
-	mutex_lock(&priv->reg_mutex);
-
-	/* For the RTL839x and following, the bits are left-aligned in the 64/128 bit field */
-	if (priv->family_id == RTL8390_FAMILY_ID)
-		pos += 12;
-	if (priv->family_id == RTL9300_FAMILY_ID)
-		pos += 3;
-	if (priv->family_id == RTL9310_FAMILY_ID)
-		pos += 8;
-
-	index = n - (pos >> 4) - 1;
-	bit = (pos << 1) % 32;
-
-	priv->r->stp_get(priv, msti, port_state);
-
-	mutex_unlock(&priv->reg_mutex);
-
-	return (port_state[index] >> bit) & 3;
-}
-
-static struct table_reg rtl838x_tbl_regs[] = {
-	TBL_DESC(0x6900, 0x6908, 3, 15, 13, 1),		// RTL8380_TBL_L2
-	TBL_DESC(0x6914, 0x6918, 18, 14, 12, 1),	// RTL8380_TBL_0
-	TBL_DESC(0xA4C8, 0xA4CC, 6, 14, 12, 1),		// RTL8380_TBL_1
-
-	TBL_DESC(0x1180, 0x1184, 3, 16, 14, 0),		// RTL8390_TBL_L2
-	TBL_DESC(0x1190, 0x1194, 17, 15, 12, 0),	// RTL8390_TBL_0
-	TBL_DESC(0x6B80, 0x6B84, 4, 14, 12, 0),		// RTL8390_TBL_1
-	TBL_DESC(0x611C, 0x6120, 9, 8, 6, 0),		// RTL8390_TBL_2
-
-	TBL_DESC(0xB320, 0xB334, 3, 18, 16, 0),		// RTL9300_TBL_L2
-	TBL_DESC(0xB340, 0xB344, 19, 16, 12, 0),	// RTL9300_TBL_0
-	TBL_DESC(0xB3A0, 0xB3A4, 20, 16, 13, 0),	// RTL9300_TBL_1
-	TBL_DESC(0xCE04, 0xCE08, 6, 14, 12, 0),		// RTL9300_TBL_2
-	TBL_DESC(0xD600, 0xD604, 30, 7, 6, 0),		// RTL9300_TBL_HSB
-	TBL_DESC(0x7880, 0x7884, 22, 9, 8, 0),		// RTL9300_TBL_HSA
-
-	TBL_DESC(0x8500, 0x8508, 8, 19, 15, 0),		// RTL9310_TBL_0
-	TBL_DESC(0x40C0, 0x40C4, 22, 16, 14, 0),	// RTL9310_TBL_1
-	TBL_DESC(0x8528, 0x852C, 6, 18, 14, 0),		// RTL9310_TBL_2
-	TBL_DESC(0x0200, 0x0204, 9, 15, 12, 0),		// RTL9310_TBL_3
-	TBL_DESC(0x20dc, 0x20e0, 29, 7, 6, 0),		// RTL9310_TBL_4
-	TBL_DESC(0x7e1c, 0x7e20, 53, 8, 6, 0),		// RTL9310_TBL_5
-};
-
-void rtl_table_init(void)
-{
-	int i;
-
-	for (i = 0; i < RTL_TBL_END; i++)
-		mutex_init(&rtl838x_tbl_regs[i].lock);
-}
-
-/*
- * Request access to table t in table access register r
- * Returns a handle to a lock for that table
- */
-struct table_reg *rtl_table_get(rtl838x_tbl_reg_t r, int t)
-{
-	if (r >= RTL_TBL_END)
-		return NULL;
-
-	if (t >= BIT(rtl838x_tbl_regs[r].c_bit-rtl838x_tbl_regs[r].t_bit))
-		return NULL;
-
-	mutex_lock(&rtl838x_tbl_regs[r].lock);
-	rtl838x_tbl_regs[r].tbl = t;
-
-	return &rtl838x_tbl_regs[r];
-}
-
-/*
- * Release a table r, unlock the corresponding lock
- */
-void rtl_table_release(struct table_reg *r)
-{
-	if (!r)
-		return;
-
-//	pr_info("Unlocking %08x\n", (u32)r);
-	mutex_unlock(&r->lock);
-//	pr_info("Unlock done\n");
-}
-
-static int rtl_table_exec(struct table_reg *r, bool is_write, int idx)
-{
-	int ret = 0;
-	u32 cmd, val;
-
-	/* Read/write bit has inverted meaning on RTL838x */
-	if (r->rmode)
-		cmd = is_write ? 0 : BIT(r->c_bit);
-	else
-		cmd = is_write ? BIT(r->c_bit) : 0;
-
-	cmd |= BIT(r->c_bit + 1); /* Execute bit */
-	cmd |= r->tbl << r->t_bit; /* Table type */
-	cmd |= idx & (BIT(r->t_bit) - 1); /* Index */
-
-	sw_w32(cmd, r->addr);
-
-	ret = readx_poll_timeout(sw_r32, r->addr, val,
-				 !(val & BIT(r->c_bit + 1)), 20, 10000);
-	if (ret)
-		pr_err("%s: timeout\n", __func__);
-
-	return ret;
-}
-
-/*
- * Reads table index idx into the data registers of the table
- */
-int rtl_table_read(struct table_reg *r, int idx)
-{
-	return rtl_table_exec(r, false, idx);
-}
-
-/*
- * Writes the content of the table data registers into the table at index idx
- */
-int rtl_table_write(struct table_reg *r, int idx)
-{
-	return rtl_table_exec(r, true, idx);
-}
-
-/*
- * Returns the address of the ith data register of table register r
- * the address is relative to the beginning of the Switch-IO block at 0xbb000000
- */
-inline u16 rtl_table_data(struct table_reg *r, int i)
-{
-	if (i >= r->max_data)
-		i = r->max_data - 1;
-	return r->data + i * 4;
-}
-
-inline u32 rtl_table_data_r(struct table_reg *r, int i)
-{
-	return sw_r32(rtl_table_data(r, i));
-}
-
-inline void rtl_table_data_w(struct table_reg *r, u32 v, int i)
-{
-	sw_w32(v, rtl_table_data(r, i));
-}
-
-/* Port register accessor functions for the RTL838x and RTL930X SoCs */
-void rtl838x_mask_port_reg(u64 clear, u64 set, int reg)
-{
-	sw_w32_mask((u32)clear, (u32)set, reg);
-}
-
-void rtl838x_set_port_reg(u64 set, int reg)
-{
-	sw_w32((u32)set, reg);
-}
-
-u64 rtl838x_get_port_reg(int reg)
-{
-	return ((u64) sw_r32(reg));
-}
-
-/* Port register accessor functions for the RTL839x and RTL931X SoCs */
-void rtl839x_mask_port_reg_be(u64 clear, u64 set, int reg)
-{
-	sw_w32_mask((u32)(clear >> 32), (u32)(set >> 32), reg);
-	sw_w32_mask((u32)(clear & 0xffffffff), (u32)(set & 0xffffffff), reg + 4);
-}
-
-u64 rtl839x_get_port_reg_be(int reg)
-{
-	u64 v = sw_r32(reg);
-
-	v <<= 32;
-	v |= sw_r32(reg + 4);
-	return v;
-}
-
-void rtl839x_set_port_reg_be(u64 set, int reg)
-{
-	sw_w32(set >> 32, reg);
-	sw_w32(set & 0xffffffff, reg + 4);
-}
-
-void rtl839x_mask_port_reg_le(u64 clear, u64 set, int reg)
-{
-	sw_w32_mask((u32)clear, (u32)set, reg);
-	sw_w32_mask((u32)(clear >> 32), (u32)(set >> 32), reg + 4);
-}
-
-void rtl839x_set_port_reg_le(u64 set, int reg)
-{
-	sw_w32(set, reg);
-	sw_w32(set >> 32, reg + 4);
-}
-
-u64 rtl839x_get_port_reg_le(int reg)
-{
-	u64 v = sw_r32(reg + 4);
-
-	v <<= 32;
-	v |= sw_r32(reg);
-	return v;
-}
-
-int read_phy(u32 port, u32 page, u32 reg, u32 *val)
-{
-	switch (soc_info.family) {
-	case RTL8380_FAMILY_ID:
-		return rtl838x_read_phy(port, page, reg, val);
-	case RTL8390_FAMILY_ID:
-		return rtl839x_read_phy(port, page, reg, val);
-	case RTL9300_FAMILY_ID:
-		return rtl930x_read_phy(port, page, reg, val);
-	case RTL9310_FAMILY_ID:
-		return rtl931x_read_phy(port, page, reg, val);
-	}
-	return -1;
-}
-
-int write_phy(u32 port, u32 page, u32 reg, u32 val)
-{
-	switch (soc_info.family) {
-	case RTL8380_FAMILY_ID:
-		return rtl838x_write_phy(port, page, reg, val);
-	case RTL8390_FAMILY_ID:
-		return rtl839x_write_phy(port, page, reg, val);
-	case RTL9300_FAMILY_ID:
-		return rtl930x_write_phy(port, page, reg, val);
-	case RTL9310_FAMILY_ID:
-		return rtl931x_write_phy(port, page, reg, val);
-	}
-	return -1;
-}
-
-static int __init rtl83xx_mdio_probe(struct rtl838x_switch_priv *priv)
-{
-	struct device *dev = priv->dev;
-	struct device_node *dn, *phy_node, *mii_np = dev->of_node;
-	struct mii_bus *bus;
-	int ret;
-	u32 pn;
-
-	pr_debug("In %s\n", __func__);
-	mii_np = of_find_compatible_node(NULL, NULL, "realtek,rtl838x-mdio");
-	if (mii_np) {
-		pr_debug("Found compatible MDIO node!\n");
-	} else {
-		dev_err(priv->dev, "no %s child node found", "mdio-bus");
-		return -ENODEV;
-	}
-
-	priv->mii_bus = of_mdio_find_bus(mii_np);
-	if (!priv->mii_bus) {
-		pr_debug("Deferring probe of mdio bus\n");
-		return -EPROBE_DEFER;
-	}
-	if (!of_device_is_available(mii_np))
-		ret = -ENODEV;
-
-	bus = devm_mdiobus_alloc(priv->ds->dev);
-	if (!bus)
-		return -ENOMEM;
-
-	bus->name = "rtl838x slave mii";
-
-	/*
-	 * Since the NIC driver is loaded first, we can use the mdio rw functions
-	 * assigned there.
-	 */
-	bus->read = priv->mii_bus->read;
-	bus->write = priv->mii_bus->write;
-	bus->read_paged = priv->mii_bus->read_paged;
-	bus->write_paged = priv->mii_bus->write_paged;
-	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", bus->name, dev->id);
-
-	bus->parent = dev;
-	priv->ds->slave_mii_bus = bus;
-	priv->ds->slave_mii_bus->priv = priv->mii_bus->priv;
-	priv->ds->slave_mii_bus->access_capabilities = priv->mii_bus->access_capabilities;
-
-	ret = mdiobus_register(priv->ds->slave_mii_bus);
-	if (ret && mii_np) {
-		of_node_put(dn);
-		return ret;
-	}
-
-	dn = of_find_compatible_node(NULL, NULL, "realtek,rtl83xx-switch");
-	if (!dn) {
-		dev_err(priv->dev, "No RTL switch node in DTS\n");
-		return -ENODEV;
-	}
-
-	for_each_node_by_name(dn, "port") {
-		phy_interface_t interface;
-		u32 led_set;
-
-		if (!of_device_is_available(dn))
-			continue;
-
-		if (of_property_read_u32(dn, "reg", &pn))
-			continue;
-
-		phy_node = of_parse_phandle(dn, "phy-handle", 0);
-		if (!phy_node) {
-			if (pn != priv->cpu_port)
-				dev_err(priv->dev, "Port node %d misses phy-handle\n", pn);
-			continue;
-		}
-
-		if (of_property_read_u32(phy_node, "sds", &priv->ports[pn].sds_num))
-			priv->ports[pn].sds_num = -1;
-		pr_debug("%s port %d has SDS %d\n", __func__, pn, priv->ports[pn].sds_num);
-
-		if (of_get_phy_mode(dn, &interface))
-			interface = PHY_INTERFACE_MODE_NA;
-		if (interface == PHY_INTERFACE_MODE_HSGMII)
-			priv->ports[pn].is2G5 = true;
-		if (interface == PHY_INTERFACE_MODE_USXGMII)
-			priv->ports[pn].is2G5 = priv->ports[pn].is10G = true;
-		if (interface == PHY_INTERFACE_MODE_10GBASER)
-			priv->ports[pn].is10G = true;
-
-		if (of_property_read_u32(dn, "led-set", &led_set))
-			led_set = 0;
-		priv->ports[pn].led_set = led_set;
-
-		// Check for the integrated SerDes of the RTL8380M first
-		if (of_property_read_bool(phy_node, "phy-is-integrated")
-		    && priv->id == 0x8380 && pn >= 24) {
-			pr_debug("----> FÓUND A SERDES\n");
-			priv->ports[pn].phy = PHY_RTL838X_SDS;
-			continue;
-		}
-
-		if (priv->id >= 0x9300) {
-			priv->ports[pn].phy_is_integrated = false;
-			if (of_property_read_bool(phy_node, "phy-is-integrated")) {
-				priv->ports[pn].phy_is_integrated = true;
-				priv->ports[pn].phy = PHY_RTL930X_SDS;
-			}
-		} else {
-			if (of_property_read_bool(phy_node, "phy-is-integrated")
-				&& !of_property_read_bool(phy_node, "sfp")) {
-				priv->ports[pn].phy = PHY_RTL8218B_INT;
-				continue;
-			}
-		}
-
-		if (!of_property_read_bool(phy_node, "phy-is-integrated")
-		    && of_property_read_bool(phy_node, "sfp")) {
-			priv->ports[pn].phy = PHY_RTL8214FC;
-			continue;
-		}
-
-		if (!of_property_read_bool(phy_node, "phy-is-integrated")
-		    && !of_property_read_bool(phy_node, "sfp")) {
-			priv->ports[pn].phy = PHY_RTL8218B_EXT;
-			continue;
-		}
-	}
-
-	/* Disable MAC polling the PHY so that we can start configuration */
-	priv->r->set_port_reg_le(0ULL, priv->r->smi_poll_ctrl);
-
-	/* Enable PHY control via SoC */
-	if (priv->family_id == RTL8380_FAMILY_ID) {
-		/* Enable SerDes NWAY and PHY control via SoC */
-		sw_w32_mask(BIT(7), BIT(15), RTL838X_SMI_GLB_CTRL);
-	} else if (priv->family_id == RTL8390_FAMILY_ID) {
-		/* Disable PHY polling via SoC */
-		sw_w32_mask(BIT(7), 0, RTL839X_SMI_GLB_CTRL);
-	}
-
-	/* Power on fibre ports and reset them if necessary */
-	if (priv->ports[24].phy == PHY_RTL838X_SDS) {
-		pr_debug("Powering on fibre ports & reset\n");
-		rtl8380_sds_power(24, 1);
-		rtl8380_sds_power(26, 1);
-	}
-
-	pr_debug("%s done\n", __func__);
-	return 0;
-}
-
-static int __init rtl83xx_get_l2aging(struct rtl838x_switch_priv *priv)
-{
-	int t = sw_r32(priv->r->l2_ctrl_1);
-
-	t &= priv->family_id == RTL8380_FAMILY_ID ? 0x7fffff : 0x1FFFFF;
-
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		t = t * 128 / 625; /* Aging time in seconds. 0: L2 aging disabled */
-	else
-		t = (t * 3) / 5;
-
-	pr_debug("L2 AGING time: %d sec\n", t);
-	pr_debug("Dynamic aging for ports: %x\n", sw_r32(priv->r->l2_port_aging_out));
-	return t;
-}
-
-/* Caller must hold priv->reg_mutex */
-int rtl83xx_lag_add(struct dsa_switch *ds, int group, int port, struct netdev_lag_upper_info *info)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int i;
-	u32 algomsk = 0;
-	u32 algoidx = 0;
-
-	if (info->tx_type != NETDEV_LAG_TX_TYPE_HASH) {
-		pr_err("%s: Only mode LACP 802.3ad (4) allowed.\n", __func__);
-		return -EINVAL;
-	}
-
-	if (group >= priv->n_lags) {
-		pr_err("%s: LAG %d invalid.\n", __func__, group);
-		return -EINVAL;
-	}
-
-	if (port >= priv->cpu_port) {
-		pr_err("%s: Port %d invalid.\n", __func__, port);
-		return -EINVAL;
-	}
-
-	for (i = 0; i < priv->n_lags; i++) {
-		if (priv->lags_port_members[i] & BIT_ULL(port))
-			break;
-	}
-	if (i != priv->n_lags) {
-		pr_err("%s: Port %d already member of LAG %d.\n", __func__, port, i);
-		return -ENOSPC;
-	}
-	switch(info->hash_type) {
-	case NETDEV_LAG_HASH_L2:
-		algomsk |= TRUNK_DISTRIBUTION_ALGO_DMAC_BIT;
-		algomsk |= TRUNK_DISTRIBUTION_ALGO_SMAC_BIT;
-	break;
-	case NETDEV_LAG_HASH_L23:
-		algomsk |= TRUNK_DISTRIBUTION_ALGO_DMAC_BIT;
-		algomsk |= TRUNK_DISTRIBUTION_ALGO_SMAC_BIT;
-		algomsk |= TRUNK_DISTRIBUTION_ALGO_SIP_BIT; //source ip
-		algomsk |= TRUNK_DISTRIBUTION_ALGO_DIP_BIT; //dest ip
-		algoidx = 1;
-	break;
-	case NETDEV_LAG_HASH_L34:
-		algomsk |= TRUNK_DISTRIBUTION_ALGO_SRC_L4PORT_BIT; //sport
-		algomsk |= TRUNK_DISTRIBUTION_ALGO_DST_L4PORT_BIT; //dport
-		algomsk |= TRUNK_DISTRIBUTION_ALGO_SIP_BIT; //source ip
-		algomsk |= TRUNK_DISTRIBUTION_ALGO_DIP_BIT; //dest ip
-		algoidx = 2;
-	break;
-	default:
-		algomsk |= 0x7f;
-	}
-	priv->r->set_distribution_algorithm(group, algoidx, algomsk);
-	priv->r->mask_port_reg_be(0, BIT_ULL(port), priv->r->trk_mbr_ctr(group));
-	priv->lags_port_members[group] |= BIT_ULL(port);
-
-	pr_info("%s: Added port %d to LAG %d. Members now %016llx.\n",
-		 __func__, port, group, priv->lags_port_members[group]);
-	return 0;
-}
-
-/* Caller must hold priv->reg_mutex */
-int rtl83xx_lag_del(struct dsa_switch *ds, int group, int port)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	if (group >= priv->n_lags) {
-		pr_err("%s: LAG %d invalid.\n", __func__, group);
-		return -EINVAL;
-	}
-
-	if (port >= priv->cpu_port) {
-		pr_err("%s: Port %d invalid.\n", __func__, port);
-		return -EINVAL;
-	}
-
-	if (!(priv->lags_port_members[group] & BIT_ULL(port))) {
-		pr_err("%s: Port %d not member of LAG %d.\n", __func__, port, group);
-		return -ENOSPC;
-	}
-
-	// 0x7f algo mask all
-	priv->r->mask_port_reg_be(BIT_ULL(port), 0, priv->r->trk_mbr_ctr(group));
-	priv->lags_port_members[group] &= ~BIT_ULL(port);
-
-	pr_info("%s: Removed port %d from LAG %d. Members now %016llx.\n",
-		 __func__, port, group, priv->lags_port_members[group]);
-	return 0;
-}
-
-/*
- * Allocate a 64 bit octet counter located in the LOG HW table
- */
-static int rtl83xx_octet_cntr_alloc(struct rtl838x_switch_priv *priv)
-{
-	int idx;
-
-	mutex_lock(&priv->reg_mutex);
-
-	idx = find_first_zero_bit(priv->octet_cntr_use_bm, MAX_COUNTERS);
-	if (idx >= priv->n_counters) {
-		mutex_unlock(&priv->reg_mutex);
-		return -1;
-	}
-
-	set_bit(idx, priv->octet_cntr_use_bm);
-	mutex_unlock(&priv->reg_mutex);
-
-	return idx;
-}
-
-/*
- * Allocate a 32-bit packet counter
- * 2 32-bit packet counters share the location of a 64-bit octet counter
- * Initially there are no free packet counters and 2 new ones need to be freed
- * by allocating the corresponding octet counter
- */
-int rtl83xx_packet_cntr_alloc(struct rtl838x_switch_priv *priv)
-{
-	int idx, j;
-
-	mutex_lock(&priv->reg_mutex);
-
-	/* Because initially no packet counters are free, the logic is reversed:
-	 * a 0-bit means the counter is already allocated (for octets)
-	 */
-	idx = find_first_bit(priv->packet_cntr_use_bm, MAX_COUNTERS * 2);
-	if (idx >= priv->n_counters * 2) {
-		j = find_first_zero_bit(priv->octet_cntr_use_bm, MAX_COUNTERS);
-		if (j >= priv->n_counters) {
-			mutex_unlock(&priv->reg_mutex);
-			return -1;
-		}
-		set_bit(j, priv->octet_cntr_use_bm);
-		idx = j * 2;
-		set_bit(j * 2 + 1, priv->packet_cntr_use_bm);
-
-	} else {
-		clear_bit(idx, priv->packet_cntr_use_bm);
-	}
-
-	mutex_unlock(&priv->reg_mutex);
-
-	return idx;
-}
-
-/*
- * Add an L2 nexthop entry for the L3 routing system / PIE forwarding in the SoC
- * Use VID and MAC in rtl838x_l2_entry to identify either a free slot in the L2 hash table
- * or mark an existing entry as a nexthop by setting it's nexthop bit
- * Called from the L3 layer
- * The index in the L2 hash table is filled into nh->l2_id;
- */
-int rtl83xx_l2_nexthop_add(struct rtl838x_switch_priv *priv, struct rtl83xx_nexthop *nh)
-{
-	struct rtl838x_l2_entry e;
-	u64 seed = priv->r->l2_hash_seed(nh->mac, nh->rvid);
-	u32 key = priv->r->l2_hash_key(priv, seed);
-	int i, idx = -1;
-	u64 entry;
-
-	pr_debug("%s searching for %08llx vid %d with key %d, seed: %016llx\n",
-		__func__, nh->mac, nh->rvid, key, seed);
-
-	e.type = L2_UNICAST;
-	u64_to_ether_addr(nh->mac, &e.mac[0]);
-	e.port = nh->port;
-
-	// Loop over all entries in the hash-bucket and over the second block on 93xx SoCs
-	for (i = 0; i < priv->l2_bucket_size; i++) {
-		entry = priv->r->read_l2_entry_using_hash(key, i, &e);
-
-		if (!e.valid || ((entry & 0x0fffffffffffffffULL) == seed)) {
-			idx = i > 3 ? ((key >> 14) & 0xffff) | i >> 1
-					: ((key << 2) | i) & 0xffff;
-			break;
-		}
-	}
-
-	if (idx < 0) {
-		pr_err("%s: No more L2 forwarding entries available\n", __func__);
-		return -1;
-	}
-
-	// Found an existing (e->valid is true) or empty entry, make it a nexthop entry
-	nh->l2_id = idx;
-	if (e.valid) {
-		nh->port = e.port;
-		nh->vid = e.vid;		// Save VID
-		nh->rvid = e.rvid;
-		nh->dev_id = e.stack_dev;
-		// If the entry is already a valid next hop entry, don't change it
-		if (e.next_hop)
-			return 0;
-	} else {
-		e.valid = true;
-		e.is_static = true;
-		e.rvid = nh->rvid;
-		e.is_ip_mc = false;
-		e.is_ipv6_mc = false;
-		e.block_da = false;
-		e.block_sa = false;
-		e.suspended = false;
-		e.age = 0;			// With port-ignore
-		e.port = priv->port_ignore;
-		u64_to_ether_addr(nh->mac, &e.mac[0]);
-	}
-	e.next_hop = true;
-	e.nh_route_id = nh->id;			// NH route ID takes place of VID
-	e.nh_vlan_target = false;
-
-	priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e);
-
-	return 0;
-}
-
-/*
- * Removes a Layer 2 next hop entry in the forwarding database
- * If it was static, the entire entry is removed, otherwise the nexthop bit is cleared
- * and we wait until the entry ages out
- */
-int rtl83xx_l2_nexthop_rm(struct rtl838x_switch_priv *priv, struct rtl83xx_nexthop *nh)
-{
-	struct rtl838x_l2_entry e;
-	u32 key = nh->l2_id >> 2;
-	int i = nh->l2_id & 0x3;
-	u64 entry = entry = priv->r->read_l2_entry_using_hash(key, i, &e);
-
-	pr_debug("%s: id %d, key %d, index %d\n", __func__, nh->l2_id, key, i);
-	if (!e.valid) {
-		dev_err(priv->dev, "unknown nexthop, id %x\n", nh->l2_id);
-		return -1;
-	}
-
-	if (e.is_static)
-		e.valid = false;
-	e.next_hop = false;
-	e.vid = nh->vid;		// Restore VID
-	e.rvid = nh->rvid;
-
-	priv->r->write_l2_entry_using_hash(key, i, &e);
-
-	return 0;
-}
-
-static int rtl83xx_handle_changeupper(struct rtl838x_switch_priv *priv,
-				      struct net_device *ndev,
-				      struct netdev_notifier_changeupper_info *info)
-{
-	struct net_device *upper = info->upper_dev;
-	struct netdev_lag_upper_info *lag_upper_info = NULL;
-	int i, j, err;
-
-	if (!netif_is_lag_master(upper))
-		return 0;
-
-	mutex_lock(&priv->reg_mutex);
-
-	for (i = 0; i < priv->n_lags; i++) {
-		if ((!priv->lag_devs[i]) || (priv->lag_devs[i] == upper))
-			break;
-	}
-	for (j = 0; j < priv->cpu_port; j++) {
-		if (priv->ports[j].dp->slave == ndev)
-			break;
-	}
-	if (j >= priv->cpu_port) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	if (info->linking) {
-		lag_upper_info = info->upper_info;
-		if (!priv->lag_devs[i])
-			priv->lag_devs[i] = upper;
-		err = rtl83xx_lag_add(priv->ds, i, priv->ports[j].dp->index, lag_upper_info);
-		if (err) {
-			err = -EINVAL;
-			goto out;
-		}
-	} else {
-		if (!priv->lag_devs[i])
-			err = -EINVAL;
-		err = rtl83xx_lag_del(priv->ds, i, priv->ports[j].dp->index);
-		if (err) {
-			err = -EINVAL;
-			goto out;
-		}
-		if (!priv->lags_port_members[i])
-			priv->lag_devs[i] = NULL;
-	}
-
-out:
-	mutex_unlock(&priv->reg_mutex);
-	return 0;
-}
-
-/*
- * Is the lower network device a DSA slave network device of our RTL930X-switch?
- * Unfortunately we cannot just follow dev->dsa_prt as this is only set for the
- * DSA master device.
- */
-int rtl83xx_port_is_under(const struct net_device * dev, struct rtl838x_switch_priv *priv)
-{
-	int i;
-
-// TODO: On 5.12:
-// 	if(!dsa_slave_dev_check(dev)) {
-//		netdev_info(dev, "%s: not a DSA device.\n", __func__);
-//		return -EINVAL;
-//	}
-
-	for (i = 0; i < priv->cpu_port; i++) {
-		if (!priv->ports[i].dp)
-			continue;
-		if (priv->ports[i].dp->slave == dev)
-			return i;
-	}
-	return -EINVAL;
-}
-
-static int rtl83xx_netdevice_event(struct notifier_block *this,
-				   unsigned long event, void *ptr)
-{
-	struct net_device *ndev = netdev_notifier_info_to_dev(ptr);
-	struct rtl838x_switch_priv *priv;
-	int err;
-
-	pr_debug("In: %s, event: %lu\n", __func__, event);
-
-	if ((event != NETDEV_CHANGEUPPER) && (event != NETDEV_CHANGELOWERSTATE))
-		return NOTIFY_DONE;
-
-	priv = container_of(this, struct rtl838x_switch_priv, nb);
-	switch (event) {
-	case NETDEV_CHANGEUPPER:
-		err = rtl83xx_handle_changeupper(priv, ndev, ptr);
-		break;
-	}
-
-	if (err)
-		return err;
-
-	return NOTIFY_DONE;
-}
-
-const static struct rhashtable_params route_ht_params = {
-	.key_len     = sizeof(u32),
-	.key_offset  = offsetof(struct rtl83xx_route, gw_ip),
-	.head_offset = offsetof(struct rtl83xx_route, linkage),
-};
-
-/*
- * Updates an L3 next hop entry in the ROUTING table
- */
-static int rtl83xx_l3_nexthop_update(struct rtl838x_switch_priv *priv,  __be32 ip_addr, u64 mac)
-{
-	struct rtl83xx_route *r;
-	struct rhlist_head *tmp, *list;
-
-	rcu_read_lock();
-	list = rhltable_lookup(&priv->routes, &ip_addr, route_ht_params);
-	if (!list) {
-		rcu_read_unlock();
-		return -ENOENT;
-	}
-
-	rhl_for_each_entry_rcu(r, tmp, list, linkage) {
-		pr_info("%s: Setting up fwding: ip %pI4, GW mac %016llx\n",
-			__func__, &ip_addr, mac);
-
-		// Reads the ROUTING table entry associated with the route
-		priv->r->route_read(r->id, r);
-		pr_info("Route with id %d to %pI4 / %d\n", r->id, &r->dst_ip, r->prefix_len);
-
-		r->nh.mac = r->nh.gw = mac;
-		r->nh.port = priv->port_ignore;
-		r->nh.id = r->id;
-
-		// Do we need to explicitly add a DMAC entry with the route's nh index?
-		if (priv->r->set_l3_egress_mac)
-			priv->r->set_l3_egress_mac(r->id, mac);
-
-		// Update ROUTING table: map gateway-mac and switch-mac id to route id
-		rtl83xx_l2_nexthop_add(priv, &r->nh);
-
-		r->attr.valid = true;
-		r->attr.action = ROUTE_ACT_FORWARD;
-		r->attr.type = 0;
-		r->attr.hit = false; // Reset route-used indicator
-
-		// Add PIE entry with dst_ip and prefix_len
-		r->pr.dip = r->dst_ip;
-		r->pr.dip_m = inet_make_mask(r->prefix_len);
-
-		if (r->is_host_route) {
-			int slot = priv->r->find_l3_slot(r, false);
-
-			pr_info("%s: Got slot for route: %d\n", __func__, slot);
-			priv->r->host_route_write(slot, r);
-		} else {
-			priv->r->route_write(r->id, r);
-			r->pr.fwd_sel = true;
-			r->pr.fwd_data = r->nh.l2_id;
-			r->pr.fwd_act = PIE_ACT_ROUTE_UC;
-		}
-
-		if (priv->r->set_l3_nexthop)
-			priv->r->set_l3_nexthop(r->nh.id, r->nh.l2_id, r->nh.if_id);
-
-		if (r->pr.id < 0) {
-			r->pr.packet_cntr = rtl83xx_packet_cntr_alloc(priv);
-			if (r->pr.packet_cntr >= 0) {
-				pr_info("Using packet counter %d\n", r->pr.packet_cntr);
-				r->pr.log_sel = true;
-				r->pr.log_data = r->pr.packet_cntr;
-			}
-			priv->r->pie_rule_add(priv, &r->pr);
-		} else {
-			int pkts = priv->r->packet_cntr_read(r->pr.packet_cntr);
-			pr_info("%s: total packets: %d\n", __func__, pkts);
-
-			priv->r->pie_rule_write(priv, r->pr.id, &r->pr);
-		}
-	}
-	rcu_read_unlock();
-	return 0;
-}
-
-static int rtl83xx_port_ipv4_resolve(struct rtl838x_switch_priv *priv,
-				     struct net_device *dev, __be32 ip_addr)
-{
-	struct neighbour *n = neigh_lookup(&arp_tbl, &ip_addr, dev);
-	int err = 0;
-	u64 mac;
-
-	if (!n) {
-		n = neigh_create(&arp_tbl, &ip_addr, dev);
-		if (IS_ERR(n))
-			return PTR_ERR(n);
-	}
-
-	/* If the neigh is already resolved, then go ahead and
-	 * install the entry, otherwise start the ARP process to
-	 * resolve the neigh.
-	 */
-	if (n->nud_state & NUD_VALID) {
-		mac = ether_addr_to_u64(n->ha);
-		pr_info("%s: resolved mac: %016llx\n", __func__, mac);
-		rtl83xx_l3_nexthop_update(priv, ip_addr, mac);
-	} else {
-		pr_info("%s: need to wait\n", __func__);
-		neigh_event_send(n, NULL);
-	}
-
-	neigh_release(n);
-	return err;
-}
-
-struct rtl83xx_walk_data {
-	struct rtl838x_switch_priv *priv;
-	int port;
-};
-
-static int rtl83xx_port_lower_walk(struct net_device *lower, struct netdev_nested_priv *_priv)
-{
-	struct rtl83xx_walk_data *data = (struct rtl83xx_walk_data *)_priv->data;
-	struct rtl838x_switch_priv *priv = data->priv;
-	int ret = 0;
-	int index;
-
-	index = rtl83xx_port_is_under(lower, priv);
-	data->port = index;
-	if (index >= 0) {
-		pr_debug("Found DSA-port, index %d\n", index);
-		ret = 1;
-	}
-
-	return ret;
-}
-
-int rtl83xx_port_dev_lower_find(struct net_device *dev, struct rtl838x_switch_priv *priv)
-{
-	struct rtl83xx_walk_data data;
-	struct netdev_nested_priv _priv;
-
-	data.priv = priv;
-	data.port = 0;
-	_priv.data = (void *)&data;
-
-	netdev_walk_all_lower_dev(dev, rtl83xx_port_lower_walk, &_priv);
-
-	return data.port;
-}
-
-static struct rtl83xx_route *rtl83xx_route_alloc(struct rtl838x_switch_priv *priv, u32 ip)
-{
-	struct rtl83xx_route *r;
-	int idx = 0, err;
-
-	mutex_lock(&priv->reg_mutex);
-
-	idx = find_first_zero_bit(priv->route_use_bm, MAX_ROUTES);
-	pr_debug("%s id: %d, ip %pI4\n", __func__, idx, &ip);
-
-	r = kzalloc(sizeof(*r), GFP_KERNEL);
-	if (!r) {
-		mutex_unlock(&priv->reg_mutex);
-		return r;
-	}
-
-	r->id = idx;
-	r->gw_ip = ip;
-	r->pr.id = -1; // We still need to allocate a rule in HW
-	r->is_host_route = false;
-
-	err = rhltable_insert(&priv->routes, &r->linkage, route_ht_params);
-	if (err) {
-		pr_err("Could not insert new rule\n");
-		mutex_unlock(&priv->reg_mutex);
-		goto out_free;
-	}
-
-	set_bit(idx, priv->route_use_bm);
-
-	mutex_unlock(&priv->reg_mutex);
-
-	return r;
-
-out_free:
-	kfree(r);
-	return NULL;
-}
-
-
-static struct rtl83xx_route *rtl83xx_host_route_alloc(struct rtl838x_switch_priv *priv, u32 ip)
-{
-	struct rtl83xx_route *r;
-	int idx = 0, err;
-
-	mutex_lock(&priv->reg_mutex);
-
-	idx = find_first_zero_bit(priv->host_route_use_bm, MAX_HOST_ROUTES);
-	pr_debug("%s id: %d, ip %pI4\n", __func__, idx, &ip);
-
-	r = kzalloc(sizeof(*r), GFP_KERNEL);
-	if (!r) {
-		mutex_unlock(&priv->reg_mutex);
-		return r;
-	}
-
-	/* We require a unique route ID irrespective of whether it is a prefix or host
-	 * route (on RTL93xx) as we use this ID to associate a DMAC and next-hop entry */
-	r->id = idx + MAX_ROUTES;
-
-	r->gw_ip = ip;
-	r->pr.id = -1; // We still need to allocate a rule in HW
-	r->is_host_route = true;
-
-	err = rhltable_insert(&priv->routes, &r->linkage, route_ht_params);
-	if (err) {
-		pr_err("Could not insert new rule\n");
-		mutex_unlock(&priv->reg_mutex);
-		goto out_free;
-	}
-
-	set_bit(idx, priv->host_route_use_bm);
-
-	mutex_unlock(&priv->reg_mutex);
-
-	return r;
-
-out_free:
-	kfree(r);
-	return NULL;
-}
-
-
-
-static void rtl83xx_route_rm(struct rtl838x_switch_priv *priv, struct rtl83xx_route *r)
-{
-	int id;
-
-	if (rhltable_remove(&priv->routes, &r->linkage, route_ht_params))
-		dev_warn(priv->dev, "Could not remove route\n");
-
-	if (r->is_host_route) {
-		id = priv->r->find_l3_slot(r, false);
-		pr_debug("%s: Got id for host route: %d\n", __func__, id);
-		r->attr.valid = false;
-		priv->r->host_route_write(id, r);
-		clear_bit(r->id - MAX_ROUTES, priv->host_route_use_bm);
-	} else {
-		// If there is a HW representation of the route, delete it
-		if (priv->r->route_lookup_hw) {
-			id = priv->r->route_lookup_hw(r);
-			pr_info("%s: Got id for prefix route: %d\n", __func__, id);
-			r->attr.valid = false;
-			priv->r->route_write(id, r);
-		}
-		clear_bit(r->id, priv->route_use_bm);
-	}
-
-	kfree(r);
-}
-
-static int rtl83xx_fib4_del(struct rtl838x_switch_priv *priv,
-			    struct fib_entry_notifier_info *info)
-{
-	struct fib_nh *nh = fib_info_nh(info->fi, 0);
-	struct rtl83xx_route *r;
-	struct rhlist_head *tmp, *list;
-
-	pr_debug("In %s, ip %pI4, len %d\n", __func__, &info->dst, info->dst_len);
-	rcu_read_lock();
-	list = rhltable_lookup(&priv->routes, &nh->fib_nh_gw4, route_ht_params);
-	if (!list) {
-		rcu_read_unlock();
-		pr_err("%s: no such gateway: %pI4\n", __func__, &nh->fib_nh_gw4);
-		return -ENOENT;
-	}
-	rhl_for_each_entry_rcu(r, tmp, list, linkage) {
-		if (r->dst_ip == info->dst && r->prefix_len == info->dst_len) {
-			pr_info("%s: found a route with id %d, nh-id %d\n",
-				__func__, r->id, r->nh.id);
-			break;
-		}
-	}
-	rcu_read_unlock();
-
-	rtl83xx_l2_nexthop_rm(priv, &r->nh);
-
-	pr_debug("%s: Releasing packet counter %d\n", __func__, r->pr.packet_cntr);
-	set_bit(r->pr.packet_cntr, priv->packet_cntr_use_bm);
-	priv->r->pie_rule_rm(priv, &r->pr);
-
-	rtl83xx_route_rm(priv, r);
-
-	nh->fib_nh_flags &= ~RTNH_F_OFFLOAD;
-
-	return 0;
-}
-
-/*
- * On the RTL93xx, an L3 termination endpoint MAC address on which the router waits
- * for packets to be routed needs to be allocated.
- */
-static int rtl83xx_alloc_router_mac(struct rtl838x_switch_priv *priv, u64 mac)
-{
-	int i, free_mac = -1;
-	struct rtl93xx_rt_mac m;
-
-	mutex_lock(&priv->reg_mutex);
-	for (i = 0; i < MAX_ROUTER_MACS; i++) {
-		priv->r->get_l3_router_mac(i, &m);
-		if (free_mac < 0 && !m.valid) {
-			free_mac = i;
-			continue;
-		}
-		if (m.valid && m.mac == mac) {
-			free_mac = i;
-			break;
-		}
-	}
-
-	if (free_mac < 0) {
-		pr_err("No free router MACs, cannot offload\n");
-		mutex_unlock(&priv->reg_mutex);
-		return -1;
-	}
-
-	m.valid = true;
-	m.mac = mac;
-	m.p_type = 0; // An individual port, not a trunk port
-	m.p_id = 0x3f;			// Listen on any port
-	m.p_id_mask = 0;
-	m.vid = 0;			// Listen on any VLAN...
-	m.vid_mask = 0; 		// ... so mask needs to be 0
-	m.mac_mask = 0xffffffffffffULL;	// We want an exact match of the interface MAC
-	m.action = L3_FORWARD;		// Route the packet
-	priv->r->set_l3_router_mac(free_mac, &m);
-
-	mutex_unlock(&priv->reg_mutex);
-
-	return 0;
-}
-
-static int rtl83xx_alloc_egress_intf(struct rtl838x_switch_priv *priv, u64 mac, int vlan)
-{
-	int i, free_mac = -1;
-	struct rtl838x_l3_intf intf;
-	u64 m;
-
-	mutex_lock(&priv->reg_mutex);
-	for (i = 0; i < MAX_SMACS; i++) {
-		m = priv->r->get_l3_egress_mac(L3_EGRESS_DMACS + i);
-		if (free_mac < 0 && !m) {
-			free_mac = i;
-			continue;
-		}
-		if (m == mac) {
-			mutex_unlock(&priv->reg_mutex);
-			return i;
-		}
-	}
-
-	if (free_mac < 0) {
-		pr_err("No free egress interface, cannot offload\n");
-		return -1;
-	}
-
-	// Set up default egress interface 1
-	intf.vid = vlan;
-	intf.smac_idx = free_mac;
-	intf.ip4_mtu_id = 1;
-	intf.ip6_mtu_id = 1;
-	intf.ttl_scope = 1; // TTL
-	intf.hl_scope = 1;  // Hop Limit
-	intf.ip4_icmp_redirect = intf.ip6_icmp_redirect = 2;  // FORWARD
-	intf.ip4_pbr_icmp_redirect = intf.ip6_pbr_icmp_redirect = 2; // FORWARD;
-	priv->r->set_l3_egress_intf(free_mac, &intf);
-
-	priv->r->set_l3_egress_mac(L3_EGRESS_DMACS + free_mac, mac);
-
-	mutex_unlock(&priv->reg_mutex);
-
-	return free_mac;
-}
-
-static int rtl83xx_fib4_add(struct rtl838x_switch_priv *priv,
-			    struct fib_entry_notifier_info *info)
-{
-	struct fib_nh *nh = fib_info_nh(info->fi, 0);
-	struct net_device *dev = fib_info_nh(info->fi, 0)->fib_nh_dev;
-	int port;
-	struct rtl83xx_route *r;
-	bool to_localhost;
-	int vlan = is_vlan_dev(dev) ? vlan_dev_vlan_id(dev) : 0;
-
-	pr_debug("In %s, ip %pI4, len %d\n", __func__, &info->dst, info->dst_len);
-	if (!info->dst) {
-		pr_info("Not offloading default route for now\n");
-		return 0;
-	}
-
-	pr_debug("GW: %pI4, interface name %s, mac %016llx, vlan %d\n", &nh->fib_nh_gw4, dev->name,
-		ether_addr_to_u64(dev->dev_addr), vlan
-	);
-
-	port = rtl83xx_port_dev_lower_find(dev, priv);
-	if (port < 0)
-		return -1;
-
-	// For now we only work with routes that have a gateway and are not ourself
-//	if ((!nh->fib_nh_gw4) && (info->dst_len != 32))
-//		return 0;
-
-	if ((info->dst & 0xff) == 0xff)
-		return 0;
-
-	// Do not offload routes to 192.168.100.x
-	if ((info->dst & 0xffffff00) == 0xc0a86400)
-		return 0;
-
-	// Do not offload routes to 127.x.x.x
-	if ((info->dst & 0xff000000) == 0x7f000000)
-		return 0;
-
-	// Allocate route or host-route (entry if hardware supports this)
-	if (info->dst_len == 32 && priv->r->host_route_write)
-		r = rtl83xx_host_route_alloc(priv, nh->fib_nh_gw4);
-	else
-		r = rtl83xx_route_alloc(priv, nh->fib_nh_gw4);
-
-	if (!r) {
-		pr_err("%s: No more free route entries\n", __func__);
-		return -1;
-	}
-
-	r->dst_ip = info->dst;
-	r->prefix_len = info->dst_len;
-	r->nh.rvid = vlan;
-	to_localhost = !nh->fib_nh_gw4;
-
-	if (priv->r->set_l3_router_mac) {
-		u64 mac = ether_addr_to_u64(dev->dev_addr);
-
-		pr_debug("Local route and router mac %016llx\n", mac);
-
-		if (rtl83xx_alloc_router_mac(priv, mac))
-			goto out_free_rt;
-
-		// vid = 0: Do not care about VID
-		r->nh.if_id = rtl83xx_alloc_egress_intf(priv, mac, vlan);
-		if (r->nh.if_id < 0)
-			goto out_free_rmac;
-
-		if (to_localhost) {
-			int slot;
-
-			r->nh.mac = mac;
-			r->nh.port = priv->port_ignore;
-			r->attr.valid = true;
-			r->attr.action = ROUTE_ACT_TRAP2CPU;
-			r->attr.type = 0;
-
-			slot = priv->r->find_l3_slot(r, false);
-			pr_debug("%s: Got slot for route: %d\n", __func__, slot);
-			priv->r->host_route_write(slot, r);
-		}
-	}
-
-	// We need to resolve the mac address of the GW
-	if (!to_localhost)
-		rtl83xx_port_ipv4_resolve(priv, dev, nh->fib_nh_gw4);
-
-	nh->fib_nh_flags |= RTNH_F_OFFLOAD;
-
-	return 0;
-
-out_free_rmac:
-out_free_rt:
-	return 0;
-}
-
-static int rtl83xx_fib6_add(struct rtl838x_switch_priv *priv,
-			    struct fib6_entry_notifier_info *info)
-{
-	pr_debug("In %s\n", __func__);
-//	nh->fib_nh_flags |= RTNH_F_OFFLOAD;
-	return 0;
-}
-
-struct net_event_work {
-	struct work_struct work;
-	struct rtl838x_switch_priv *priv;
-	u64 mac;
-	u32 gw_addr;
-};
-
-static void rtl83xx_net_event_work_do(struct work_struct *work)
-{
-	struct net_event_work *net_work =
-		container_of(work, struct net_event_work, work);
-	struct rtl838x_switch_priv *priv = net_work->priv;
-
-	rtl83xx_l3_nexthop_update(priv, net_work->gw_addr, net_work->mac);
-
-	kfree(net_work);
-}
-
-static int rtl83xx_netevent_event(struct notifier_block *this,
-				 unsigned long event, void *ptr)
-{
-	struct rtl838x_switch_priv *priv;
-	struct net_device *dev;
-	struct neighbour *n = ptr;
-	int err, port;
-	struct net_event_work *net_work;
-
-	priv = container_of(this, struct rtl838x_switch_priv, ne_nb);
-
-	switch (event) {
-	case NETEVENT_NEIGH_UPDATE:
-		if (n->tbl != &arp_tbl)
-			return NOTIFY_DONE;
-		dev = n->dev;
-		port = rtl83xx_port_dev_lower_find(dev, priv);
-		if (port < 0 || !(n->nud_state & NUD_VALID)) {
-			pr_debug("%s: Neigbour invalid, not updating\n", __func__);
-			return NOTIFY_DONE;
-		}
-
-		net_work = kzalloc(sizeof(*net_work), GFP_ATOMIC);
-		if (!net_work)
-			return NOTIFY_BAD;
-
-		INIT_WORK(&net_work->work, rtl83xx_net_event_work_do);
-		net_work->priv = priv;
-
-		net_work->mac = ether_addr_to_u64(n->ha);
-		net_work->gw_addr = *(__be32 *) n->primary_key;
-
-		pr_debug("%s: updating neighbour on port %d, mac %016llx\n",
-			__func__, port, net_work->mac);
-		schedule_work(&net_work->work);
-		if (err)
-			netdev_warn(dev, "failed to handle neigh update (err %d)\n", err);
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-struct rtl83xx_fib_event_work {
-	struct work_struct work;
-	union {
-		struct fib_entry_notifier_info fen_info;
-		struct fib6_entry_notifier_info fen6_info;
-		struct fib_rule_notifier_info fr_info;
-	};
-	struct rtl838x_switch_priv *priv;
-	bool is_fib6;
-	unsigned long event;
-};
-
-static void rtl83xx_fib_event_work_do(struct work_struct *work)
-{
-	struct rtl83xx_fib_event_work *fib_work =
-		container_of(work, struct rtl83xx_fib_event_work, work);
-	struct rtl838x_switch_priv *priv = fib_work->priv;
-	struct fib_rule *rule;
-	int err;
-
-	/* Protect internal structures from changes */
-	rtnl_lock();
-	pr_debug("%s: doing work, event %ld\n", __func__, fib_work->event);
-	switch (fib_work->event) {
-	case FIB_EVENT_ENTRY_ADD:
-	case FIB_EVENT_ENTRY_REPLACE:
-	case FIB_EVENT_ENTRY_APPEND:
-		if (fib_work->is_fib6) {
-			err = rtl83xx_fib6_add(priv, &fib_work->fen6_info);
-		} else {
-			err = rtl83xx_fib4_add(priv, &fib_work->fen_info);
-			fib_info_put(fib_work->fen_info.fi);
-		}
-		if (err)
-			pr_err("%s: FIB4 failed\n", __func__);
-		break;
-	case FIB_EVENT_ENTRY_DEL:
-		rtl83xx_fib4_del(priv, &fib_work->fen_info);
-		fib_info_put(fib_work->fen_info.fi);
-		break;
-	case FIB_EVENT_RULE_ADD:
-	case FIB_EVENT_RULE_DEL:
-		rule = fib_work->fr_info.rule;
-		if (!fib4_rule_default(rule))
-			pr_err("%s: FIB4 default rule failed\n", __func__);
-		fib_rule_put(rule);
-		break;
-	}
-	rtnl_unlock();
-	kfree(fib_work);
-}
-
-/* Called with rcu_read_lock() */
-static int rtl83xx_fib_event(struct notifier_block *this, unsigned long event, void *ptr)
-{
-	struct fib_notifier_info *info = ptr;
-	struct rtl838x_switch_priv *priv;
-	struct rtl83xx_fib_event_work *fib_work;
-
-	if ((info->family != AF_INET && info->family != AF_INET6 &&
-	     info->family != RTNL_FAMILY_IPMR &&
-	     info->family != RTNL_FAMILY_IP6MR))
-		return NOTIFY_DONE;
-
-	priv = container_of(this, struct rtl838x_switch_priv, fib_nb);
-
-	fib_work = kzalloc(sizeof(*fib_work), GFP_ATOMIC);
-	if (!fib_work)
-		return NOTIFY_BAD;
-
-	INIT_WORK(&fib_work->work, rtl83xx_fib_event_work_do);
-	fib_work->priv = priv;
-	fib_work->event = event;
-	fib_work->is_fib6 = false;
-
-	switch (event) {
-	case FIB_EVENT_ENTRY_ADD:
-	case FIB_EVENT_ENTRY_REPLACE:
-	case FIB_EVENT_ENTRY_APPEND:
-	case FIB_EVENT_ENTRY_DEL:
-		pr_debug("%s: FIB_ENTRY ADD/DEL, event %ld\n", __func__, event);
-		if (info->family == AF_INET) {
-			struct fib_entry_notifier_info *fen_info = ptr;
-
-			if (fen_info->fi->fib_nh_is_v6) {
-				NL_SET_ERR_MSG_MOD(info->extack,
-					"IPv6 gateway with IPv4 route is not supported");
-				kfree(fib_work);
-				return notifier_from_errno(-EINVAL);
-			}
-
-			memcpy(&fib_work->fen_info, ptr, sizeof(fib_work->fen_info));
-			/* Take referece on fib_info to prevent it from being
-			* freed while work is queued. Release it afterwards.
-			*/
-			fib_info_hold(fib_work->fen_info.fi);
-
-		} else if (info->family == AF_INET6) {
-			struct fib6_entry_notifier_info *fen6_info = ptr;
-			pr_warn("%s: FIB_RULE ADD/DEL for IPv6 not supported\n", __func__);
-			kfree(fib_work);
-			return NOTIFY_DONE;
-		}
-		break;
-
-	case FIB_EVENT_RULE_ADD:
-	case FIB_EVENT_RULE_DEL:
-		pr_debug("%s: FIB_RULE ADD/DEL, event: %ld\n", __func__, event);
-		memcpy(&fib_work->fr_info, ptr, sizeof(fib_work->fr_info));
-		fib_rule_get(fib_work->fr_info.rule);
-		break;
-	}
-
-	schedule_work(&fib_work->work);
-
-	return NOTIFY_DONE;
-}
-
-static int __init rtl83xx_sw_probe(struct platform_device *pdev)
-{
-	int err = 0, i;
-	struct rtl838x_switch_priv *priv;
-	struct device *dev = &pdev->dev;
-	u64 bpdu_mask;
-
-	pr_debug("Probing RTL838X switch device\n");
-	if (!pdev->dev.of_node) {
-		dev_err(dev, "No DT found\n");
-		return -EINVAL;
-	}
-
-	// Initialize access to RTL switch tables
-	rtl_table_init();
-
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
-
-	if (!priv->ds)
-		return -ENOMEM;
-	priv->ds->dev = dev;
-	priv->ds->priv = priv;
-	priv->ds->ops = &rtl83xx_switch_ops;
-	priv->dev = dev;
-
-	mutex_init(&priv->reg_mutex);
-
-	priv->family_id = soc_info.family;
-	priv->id = soc_info.id;
-	switch(soc_info.family) {
-	case RTL8380_FAMILY_ID:
-		priv->ds->ops = &rtl83xx_switch_ops;
-		priv->cpu_port = RTL838X_CPU_PORT;
-		priv->port_mask = 0x1f;
-		priv->port_width = 1;
-		priv->irq_mask = 0x0FFFFFFF;
-		priv->r = &rtl838x_reg;
-		priv->ds->num_ports = 29;
-		priv->fib_entries = 8192;
-		rtl8380_get_version(priv);
-		priv->n_lags = 8;
-		priv->l2_bucket_size = 4;
-		priv->n_pie_blocks = 12;
-		priv->port_ignore = 0x1f;
-		priv->n_counters = 128;
-		break;
-	case RTL8390_FAMILY_ID:
-		priv->ds->ops = &rtl83xx_switch_ops;
-		priv->cpu_port = RTL839X_CPU_PORT;
-		priv->port_mask = 0x3f;
-		priv->port_width = 2;
-		priv->irq_mask = 0xFFFFFFFFFFFFFULL;
-		priv->r = &rtl839x_reg;
-		priv->ds->num_ports = 53;
-		priv->fib_entries = 16384;
-		rtl8390_get_version(priv);
-		priv->n_lags = 16;
-		priv->l2_bucket_size = 4;
-		priv->n_pie_blocks = 18;
-		priv->port_ignore = 0x3f;
-		priv->n_counters = 1024;
-		break;
-	case RTL9300_FAMILY_ID:
-		priv->ds->ops = &rtl930x_switch_ops;
-		priv->cpu_port = RTL930X_CPU_PORT;
-		priv->port_mask = 0x1f;
-		priv->port_width = 1;
-		priv->irq_mask = 0x0FFFFFFF;
-		priv->r = &rtl930x_reg;
-		priv->ds->num_ports = 29;
-		priv->fib_entries = 16384;
-		priv->version = RTL8390_VERSION_A;
-		priv->n_lags = 16;
-		sw_w32(1, RTL930X_ST_CTRL);
-		priv->l2_bucket_size = 8;
-		priv->n_pie_blocks = 16;
-		priv->port_ignore = 0x3f;
-		priv->n_counters = 2048;
-		break;
-	case RTL9310_FAMILY_ID:
-		priv->ds->ops = &rtl930x_switch_ops;
-		priv->cpu_port = RTL931X_CPU_PORT;
-		priv->port_mask = 0x3f;
-		priv->port_width = 2;
-		priv->irq_mask = 0xFFFFFFFFFFFFFULL;
-		priv->r = &rtl931x_reg;
-		priv->ds->num_ports = 57;
-		priv->fib_entries = 16384;
-		priv->version = RTL8390_VERSION_A;
-		priv->n_lags = 16;
-		priv->l2_bucket_size = 8;
-		break;
-	}
-	pr_debug("Chip version %c\n", priv->version);
-
-	err = rtl83xx_mdio_probe(priv);
-	if (err) {
-		/* Probing fails the 1st time because of missing ethernet driver
-		 * initialization. Use this to disable traffic in case the bootloader left if on
-		 */
-		return err;
-	}
-	err = dsa_register_switch(priv->ds);
-	if (err) {
-		dev_err(dev, "Error registering switch: %d\n", err);
-		return err;
-	}
-
-	/*
-	 * dsa_to_port returns dsa_port from the port list in
-	 * dsa_switch_tree, the tree is built when the switch
-	 * is registered by dsa_register_switch
-	 */
-	for (i = 0; i <= priv->cpu_port; i++)
-		priv->ports[i].dp = dsa_to_port(priv->ds, i);
-
-	/* Enable link and media change interrupts. Are the SERDES masks needed? */
-	sw_w32_mask(0, 3, priv->r->isr_glb_src);
-
-	priv->r->set_port_reg_le(priv->irq_mask, priv->r->isr_port_link_sts_chg);
-	priv->r->set_port_reg_le(priv->irq_mask, priv->r->imr_port_link_sts_chg);
-
-	priv->link_state_irq = platform_get_irq(pdev, 0);
-	pr_info("LINK state irq: %d\n", priv->link_state_irq);
-	switch (priv->family_id) {
-	case RTL8380_FAMILY_ID:
-		err = request_irq(priv->link_state_irq, rtl838x_switch_irq,
-				IRQF_SHARED, "rtl838x-link-state", priv->ds);
-		break;
-	case RTL8390_FAMILY_ID:
-		err = request_irq(priv->link_state_irq, rtl839x_switch_irq,
-				IRQF_SHARED, "rtl839x-link-state", priv->ds);
-		break;
-	case RTL9300_FAMILY_ID:
-		err = request_irq(priv->link_state_irq, rtl930x_switch_irq,
-				IRQF_SHARED, "rtl930x-link-state", priv->ds);
-		break;
-	case RTL9310_FAMILY_ID:
-		err = request_irq(priv->link_state_irq, rtl931x_switch_irq,
-				IRQF_SHARED, "rtl931x-link-state", priv->ds);
-		break;
-	}
-	if (err) {
-		dev_err(dev, "Error setting up switch interrupt.\n");
-		/* Need to free allocated switch here */
-	}
-
-	/* Enable interrupts for switch, on RTL931x, the IRQ is always on globally */
-	if (soc_info.family != RTL9310_FAMILY_ID)
-		sw_w32(0x1, priv->r->imr_glb);
-
-	rtl83xx_get_l2aging(priv);
-
-	rtl83xx_setup_qos(priv);
-
-	priv->r->l3_setup(priv);
-
-	/* Clear all destination ports for mirror groups */
-	for (i = 0; i < 4; i++)
-		priv->mirror_group_ports[i] = -1;
-
-	/*
-	 * Register netdevice event callback to catch changes in link aggregation groups
-	 */
-	priv->nb.notifier_call = rtl83xx_netdevice_event;
-	if (register_netdevice_notifier(&priv->nb)) {
-		priv->nb.notifier_call = NULL;
-		dev_err(dev, "Failed to register LAG netdev notifier\n");
-		goto err_register_nb;
-	}
-
-	// Initialize hash table for L3 routing
-	rhltable_init(&priv->routes, &route_ht_params);
-
-	/*
-	 * Register netevent notifier callback to catch notifications about neighboring
-	 * changes to update nexthop entries for L3 routing.
-	 */
-	priv->ne_nb.notifier_call = rtl83xx_netevent_event;
-	if (register_netevent_notifier(&priv->ne_nb)) {
-		priv->ne_nb.notifier_call = NULL;
-		dev_err(dev, "Failed to register netevent notifier\n");
-		goto err_register_ne_nb;
-	}
-
-	priv->fib_nb.notifier_call = rtl83xx_fib_event;
-
-	/*
-	 * Register Forwarding Information Base notifier to offload routes where
-	 * where possible
-	 * Only FIBs pointing to our own netdevs are programmed into
-	 * the device, so no need to pass a callback.
-	 */
-	err = register_fib_notifier(&init_net, &priv->fib_nb, NULL, NULL);
-	if (err)
-		goto err_register_fib_nb;
-
-	// TODO: put this into l2_setup()
-	// Flood BPDUs to all ports including cpu-port
-	if (soc_info.family != RTL9300_FAMILY_ID) {
-		bpdu_mask = soc_info.family == RTL8380_FAMILY_ID ? 0x1FFFFFFF : 0x1FFFFFFFFFFFFF;
-		priv->r->set_port_reg_be(bpdu_mask, priv->r->rma_bpdu_fld_pmask);
-
-		// TRAP 802.1X frames (EAPOL) to the CPU-Port, bypass STP and VLANs
-		sw_w32(7, priv->r->spcl_trap_eapol_ctrl);
-
-		rtl838x_dbgfs_init(priv);
-	} else {
-		rtl930x_dbgfs_init(priv);
-	}
-
-	return 0;
-
-err_register_fib_nb:
-	unregister_netevent_notifier(&priv->ne_nb);
-err_register_ne_nb:
-	unregister_netdevice_notifier(&priv->nb);
-err_register_nb:
-	return err;
-}
-
-static int rtl83xx_sw_remove(struct platform_device *pdev)
-{
-	// TODO:
-	pr_debug("Removing platform driver for rtl83xx-sw\n");
-	return 0;
-}
-
-static const struct of_device_id rtl83xx_switch_of_ids[] = {
-	{ .compatible = "realtek,rtl83xx-switch"},
-	{ /* sentinel */ }
-};
-
-
-MODULE_DEVICE_TABLE(of, rtl83xx_switch_of_ids);
-
-static struct platform_driver rtl83xx_switch_driver = {
-	.probe = rtl83xx_sw_probe,
-	.remove = rtl83xx_sw_remove,
-	.driver = {
-		.name = "rtl83xx-switch",
-		.pm = NULL,
-		.of_match_table = rtl83xx_switch_of_ids,
-	},
-};
-
-module_platform_driver(rtl83xx_switch_driver);
-
-MODULE_AUTHOR("B. Koblitz");
-MODULE_DESCRIPTION("RTL83XX SoC Switch Driver");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/debugfs.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/debugfs.c
deleted file mode 100644
index 3c935f629af6..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/debugfs.c
+++ /dev/null
@@ -1,730 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/debugfs.h>
-#include <linux/kernel.h>
-
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-#include "rtl83xx.h"
-
-#define RTL838X_DRIVER_NAME "rtl838x"
-
-#define RTL8380_LED_GLB_CTRL			(0xA000)
-#define RTL8380_LED_MODE_SEL			(0x1004)
-#define RTL8380_LED_MODE_CTRL			(0xA004)
-#define RTL8380_LED_P_EN_CTRL			(0xA008)
-#define RTL8380_LED_SW_CTRL			(0xA00C)
-#define RTL8380_LED0_SW_P_EN_CTRL		(0xA010)
-#define RTL8380_LED1_SW_P_EN_CTRL		(0xA014)
-#define RTL8380_LED2_SW_P_EN_CTRL		(0xA018)
-#define RTL8380_LED_SW_P_CTRL(p)		(0xA01C + (((p) << 2)))
-
-#define RTL8390_LED_GLB_CTRL			(0x00E4)
-#define RTL8390_LED_SET_2_3_CTRL		(0x00E8)
-#define RTL8390_LED_SET_0_1_CTRL		(0x00EC)
-#define RTL8390_LED_COPR_SET_SEL_CTRL(p)	(0x00F0 + (((p >> 4) << 2)))
-#define RTL8390_LED_FIB_SET_SEL_CTRL(p)		(0x0100 + (((p >> 4) << 2)))
-#define RTL8390_LED_COPR_PMASK_CTRL(p)		(0x0110 + (((p >> 5) << 2)))
-#define RTL8390_LED_FIB_PMASK_CTRL(p)		(0x00118 + (((p >> 5) << 2)))
-#define RTL8390_LED_COMBO_CTRL(p)		(0x0120 + (((p >> 5) << 2)))
-#define RTL8390_LED_SW_CTRL			(0x0128)
-#define RTL8390_LED_SW_P_EN_CTRL(p)		(0x012C + (((p / 10) << 2)))
-#define RTL8390_LED_SW_P_CTRL(p)		(0x0144 + (((p) << 2)))
-
-#define RTL838X_MIR_QID_CTRL(grp)		(0xAD44 + (((grp) << 2)))
-#define RTL838X_MIR_RSPAN_VLAN_CTRL(grp)	(0xA340 + (((grp) << 2)))
-#define RTL838X_MIR_RSPAN_VLAN_CTRL_MAC(grp)	(0xAA70 + (((grp) << 2)))
-#define RTL838X_MIR_RSPAN_TX_CTRL		(0xA350)
-#define RTL838X_MIR_RSPAN_TX_TAG_RM_CTRL	(0xAA80)
-#define RTL838X_MIR_RSPAN_TX_TAG_EN_CTRL	(0xAA84)
-#define RTL839X_MIR_RSPAN_VLAN_CTRL(grp)	(0xA340 + (((grp) << 2)))
-#define RTL839X_MIR_RSPAN_TX_CTRL		(0x69b0)
-#define RTL839X_MIR_RSPAN_TX_TAG_RM_CTRL	(0x2550)
-#define RTL839X_MIR_RSPAN_TX_TAG_EN_CTRL	(0x2554)
-#define RTL839X_MIR_SAMPLE_RATE_CTRL		(0x2558)
-
-#define RTL838X_STAT_PRVTE_DROP_COUNTERS	(0x6A00)
-#define RTL839X_STAT_PRVTE_DROP_COUNTERS	(0x3E00)
-#define RTL930X_STAT_PRVTE_DROP_COUNTERS	(0xB5B8)
-#define RTL931X_STAT_PRVTE_DROP_COUNTERS	(0xd800)
-
-int rtl83xx_port_get_stp_state(struct rtl838x_switch_priv *priv, int port);
-void rtl83xx_port_stp_state_set(struct dsa_switch *ds, int port, u8 state);
-void rtl83xx_fast_age(struct dsa_switch *ds, int port);
-u32 rtl838x_get_egress_rate(struct rtl838x_switch_priv *priv, int port);
-u32 rtl839x_get_egress_rate(struct rtl838x_switch_priv *priv, int port);
-int rtl838x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate);
-int rtl839x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate);
-
-
-const char *rtl838x_drop_cntr[] = {
-    "ALE_TX_GOOD_PKTS", "MAC_RX_DROP", "ACL_FWD_DROP", "HW_ATTACK_PREVENTION_DROP",
-    "RMA_DROP", "VLAN_IGR_FLTR_DROP", "INNER_OUTER_CFI_EQUAL_1_DROP", "PORT_MOVE_DROP",
-    "NEW_SA_DROP", "MAC_LIMIT_SYS_DROP", "MAC_LIMIT_VLAN_DROP", "MAC_LIMIT_PORT_DROP",
-    "SWITCH_MAC_DROP", "ROUTING_EXCEPTION_DROP", "DA_LKMISS_DROP", "RSPAN_DROP",
-    "ACL_LKMISS_DROP", "ACL_DROP", "INBW_DROP", "IGR_METER_DROP",
-    "ACCEPT_FRAME_TYPE_DROP", "STP_IGR_DROP", "INVALID_SA_DROP", "SA_BLOCKING_DROP",
-    "DA_BLOCKING_DROP", "L2_INVALID_DPM_DROP", "MCST_INVALID_DPM_DROP", "RX_FLOW_CONTROL_DROP",
-    "STORM_SPPRS_DROP", "LALS_DROP", "VLAN_EGR_FILTER_DROP", "STP_EGR_DROP",
-    "SRC_PORT_FILTER_DROP", "PORT_ISOLATION_DROP", "ACL_FLTR_DROP", "MIRROR_FLTR_DROP",
-    "TX_MAX_DROP", "LINK_DOWN_DROP", "FLOW_CONTROL_DROP", "BRIDGE .1d discards"
-};
-
-const char *rtl839x_drop_cntr[] = {
-    "ALE_TX_GOOD_PKTS", "ERROR_PKTS", "EGR_ACL_DROP", "EGR_METER_DROP",
-    "OAM", "CFM" "VLAN_IGR_FLTR", "VLAN_ERR",
-    "INNER_OUTER_CFI_EQUAL_1", "VLAN_TAG_FORMAT", "SRC_PORT_SPENDING_TREE", "INBW",
-    "RMA", "HW_ATTACK_PREVENTION", "PROTO_STORM", "MCAST_SA",
-    "IGR_ACL_DROP", "IGR_METER_DROP", "DFLT_ACTION_FOR_MISS_ACL_AND_C2SC", "NEW_SA",
-    "PORT_MOVE", "SA_BLOCKING", "ROUTING_EXCEPTION", "SRC_PORT_SPENDING_TREE_NON_FWDING",
-    "MAC_LIMIT", "UNKNOW_STORM", "MISS_DROP", "CPU_MAC_DROP",
-    "DA_BLOCKING", "SRC_PORT_FILTER_BEFORE_EGR_ACL", "VLAN_EGR_FILTER", "SPANNING_TRE",
-    "PORT_ISOLATION", "OAM_EGRESS_DROP", "MIRROR_ISOLATION", "MAX_LEN_BEFORE_EGR_ACL",
-    "SRC_PORT_FILTER_BEFORE_MIRROR", "MAX_LEN_BEFORE_MIRROR", "SPECIAL_CONGEST_BEFORE_MIRROR",
-    "LINK_STATUS_BEFORE_MIRROR",
-    "WRED_BEFORE_MIRROR", "MAX_LEN_AFTER_MIRROR", "SPECIAL_CONGEST_AFTER_MIRROR",
-    "LINK_STATUS_AFTER_MIRROR",
-    "WRED_AFTER_MIRROR"
-};
-
-const char *rtl930x_drop_cntr[] = {
-	"OAM_PARSER", "UC_RPF", "DEI_CFI", "MAC_IP_SUBNET_BASED_VLAN", "VLAN_IGR_FILTER",
-	"L2_UC_MC", "IPV_IP6_MC_BRIDGE", "PTP", "USER_DEF_0_3", "RESERVED",
-	"RESERVED1", "RESERVED2", "BPDU_RMA", "LACP", "LLDP",
-	"EAPOL", "XX_RMA", "L3_IPUC_NON_IP", "IP4_IP6_HEADER_ERROR", "L3_BAD_IP",
-	"L3_DIP_DMAC_MISMATCH", "IP4_IP_OPTION", "IP_UC_MC_ROUTING_LOOK_UP_MISS", "L3_DST_NULL_INTF",
-	"L3_PBR_NULL_INTF",
-	"HOST_NULL_INTF", "ROUTE_NULL_INTF", "BRIDGING_ACTION", "ROUTING_ACTION", "IPMC_RPF",
-	"L2_NEXTHOP_AGE_OUT", "L3_UC_TTL_FAIL", "L3_MC_TTL_FAIL", "L3_UC_MTU_FAIL", "L3_MC_MTU_FAIL",
-	"L3_UC_ICMP_REDIR", "IP6_MLD_OTHER_ACT", "ND", "IP_MC_RESERVED", "IP6_HBH",
-	"INVALID_SA", "L2_HASH_FULL", "NEW_SA", "PORT_MOVE_FORBID", "STATIC_PORT_MOVING",
-	"DYNMIC_PORT_MOVING", "L3_CRC", "MAC_LIMIT", "ATTACK_PREVENT", "ACL_FWD_ACTION",
-	"OAMPDU", "OAM_MUX", "TRUNK_FILTER", "ACL_DROP", "IGR_BW",
-	"ACL_METER", "VLAN_ACCEPT_FRAME_TYPE", "MSTP_SRC_DROP_DISABLED_BLOCKING", "SA_BLOCK", "DA_BLOCK",
-	"STORM_CONTROL", "VLAN_EGR_FILTER", "MSTP_DESTINATION_DROP", "SRC_PORT_FILTER", "PORT_ISOLATION",
-	"TX_MAX_FRAME_SIZE", "EGR_LINK_STATUS", "MAC_TX_DISABLE", "MAC_PAUSE_FRAME", "MAC_RX_DROP",
-	"MIRROR_ISOLATE", "RX_FC", "EGR_QUEUE", "HSM_RUNOUT", "ROUTING_DISABLE", "INVALID_L2_NEXTHOP_ENTRY",
-	"L3_MC_SRC_FLT", "CPUTAG_FLT", "FWD_PMSK_NULL", "IPUC_ROUTING_LOOKUP_MISS", "MY_DEV_DROP",
-	"STACK_NONUC_BLOCKING_PMSK", "STACK_PORT_NOT_FOUND", "ACL_LOOPBACK_DROP", "IP6_ROUTING_EXT_HEADER"
-};
-
-const char *rtl931x_drop_cntr[] = {
-	"ALE_RX_GOOD_PKTS", "RX_MAX_FRAME_SIZE", "MAC_RX_DROP", "OPENFLOW_IP_MPLS_TTL", "OPENFLOW_TBL_MISS",
-	"IGR_BW", "SPECIAL_CONGEST", "EGR_QUEUE", "RESERVED", "EGR_LINK_STATUS", "STACK_UCAST_NONUCAST_TTL", // 10
-	"STACK_NONUC_BLOCKING_PMSK", "L2_CRC", "SRC_PORT_FILTER", "PARSER_PACKET_TOO_LONG", "PARSER_MALFORM_PACKET",
-	"MPLS_OVER_2_LBL", "EACL_METER", "IACL_METER", "PROTO_STORM", "INVALID_CAPWAP_HEADER", // 20
-	"MAC_IP_SUBNET_BASED_VLAN", "OAM_PARSER", "UC_MC_RPF", "IP_MAC_BINDING_MATCH_MISMATCH", "SA_BLOCK",
-	"TUNNEL_IP_ADDRESS_CHECK", "EACL_DROP", "IACL_DROP", "ATTACK_PREVENT", "SYSTEM_PORT_LIMIT_LEARN", // 30,
-	"OAMPDU", "CCM_RX", "CFM_UNKNOWN_TYPE", "LBM_LBR_LTM_LTR", "Y_1731", "VLAN_LIMIT_LEARN",
-	"VLAN_ACCEPT_FRAME_TYPE", "CFI_1", "STATIC_DYNAMIC_PORT_MOVING", "PORT_MOVE_FORBID", // 40
-	"L3_CRC", "BPDU_PTP_LLDP_EAPOL_RMA", "MSTP_SRC_DROP_DISABLED_BLOCKING", "INVALID_SA", "NEW_SA",
-	"VLAN_IGR_FILTER", "IGR_VLAN_CONVERT", "GRATUITOUS_ARP", "MSTP_SRC_DROP", "L2_HASH_FULL", // 50
-	"MPLS_UNKNOWN_LBL", "L3_IPUC_NON_IP", "TTL", "MTU", "ICMP_REDIRECT", "STORM_CONTROL", "L3_DIP_DMAC_MISMATCH",
-	"IP4_IP_OPTION", "IP6_HBH_EXT_HEADER", "IP4_IP6_HEADER_ERROR", // 60
-	"ROUTING_IP_ADDR_CHECK", "ROUTING_EXCEPTION", "DA_BLOCK", "OAM_MUX", "PORT_ISOLATION", "VLAN_EGR_FILTER",
-	"MIRROR_ISOLATE", "MSTP_DESTINATION_DROP", "L2_MC_BRIDGE", "IP_UC_MC_ROUTING_LOOK_UP_MISS", // 70
-	"L2_UC", "L2_MC", "IP4_MC", "IP6_MC", "L3_UC_MC_ROUTE", "UNKNOWN_L2_UC_FLPM", "BC_FLPM",
-	"VLAN_PRO_UNKNOWN_L2_MC_FLPM", "VLAN_PRO_UNKNOWN_IP4_MC_FLPM", "VLAN_PROFILE_UNKNOWN_IP6_MC_FLPM" // 80,
-};
-
-static ssize_t rtl838x_common_read(char __user *buffer, size_t count,
-					loff_t *ppos, unsigned int value)
-{
-	char *buf;
-	ssize_t len;
-
-	if (*ppos != 0)
-		return 0;
-
-	buf = kasprintf(GFP_KERNEL, "0x%08x\n", value);
-	if (!buf)
-		return -ENOMEM;
-
-	if (count < strlen(buf)) {
-		kfree(buf);
-		return -ENOSPC;
-	}
-
-	len = simple_read_from_buffer(buffer, count, ppos, buf, strlen(buf));
-	kfree(buf);
-
-	return len;
-}
-
-static ssize_t rtl838x_common_write(const char __user *buffer, size_t count,
-				 loff_t *ppos, unsigned int *value)
-{
-	char b[32];
-	ssize_t len;
-	int ret;
-
-	if (*ppos != 0)
-		return -EINVAL;
-
-	if (count >= sizeof(b))
-		return -ENOSPC;
-
-	len = simple_write_to_buffer(b, sizeof(b) - 1, ppos,
-				     buffer, count);
-	if (len < 0)
-		return len;
-
-	b[len] = '\0';
-	ret = kstrtouint(b, 16, value);
-	if (ret)
-		return -EIO;
-
-	return len;
-}
-
-static ssize_t stp_state_read(struct file *filp, char __user *buffer, size_t count,
-			     loff_t *ppos)
-{
-	struct rtl838x_port *p = filp->private_data;
-	struct dsa_switch *ds = p->dp->ds;
-	int value = rtl83xx_port_get_stp_state(ds->priv, p->dp->index);
-
-	if (value < 0)
-		return -EINVAL;
-
-	return rtl838x_common_read(buffer, count, ppos, (u32)value);
-}
-
-static ssize_t stp_state_write(struct file *filp, const char __user *buffer,
-				size_t count, loff_t *ppos)
-{
-	struct rtl838x_port *p = filp->private_data;
-	u32 value;
-	size_t res = rtl838x_common_write(buffer, count, ppos, &value);
-	if (res < 0)
-		return res;
-
-	rtl83xx_port_stp_state_set(p->dp->ds, p->dp->index, (u8)value);
-
-	return res;
-}
-
-static const struct file_operations stp_state_fops = {
-	.owner = THIS_MODULE,
-	.open = simple_open,
-	.read = stp_state_read,
-	.write = stp_state_write,
-};
-
-static ssize_t drop_counter_read(struct file *filp, char __user *buffer, size_t count,
-			     loff_t *ppos)
-{
-	struct rtl838x_switch_priv *priv = filp->private_data;
-	int i;
-	const char **d;
-	u32 v;
-	char *buf;
-	int n = 0, len, offset;
-	int num;
-
-	switch (priv->family_id) {
-	case RTL8380_FAMILY_ID:
-		d = rtl838x_drop_cntr;
-		offset = RTL838X_STAT_PRVTE_DROP_COUNTERS;
-		num = 40;
-		break;
-	case RTL8390_FAMILY_ID:
-		d = rtl839x_drop_cntr;
-		offset = RTL839X_STAT_PRVTE_DROP_COUNTERS;
-		num = 45;
-		break;
-	case RTL9300_FAMILY_ID:
-		d = rtl930x_drop_cntr;
-		offset = RTL930X_STAT_PRVTE_DROP_COUNTERS;
-		num = 85;
-		break;
-	case RTL9310_FAMILY_ID:
-		d = rtl931x_drop_cntr;
-		offset = RTL931X_STAT_PRVTE_DROP_COUNTERS;
-		num = 81;
-		break;
-	}
-
-	buf = kmalloc(30 * num, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	for (i = 0; i < num; i++) {
-		v = sw_r32(offset + (i << 2)) & 0xffff;
-		n += sprintf(buf + n, "%s: %d\n", d[i], v);
-	}
-
-	if (count < strlen(buf)) {
-		kfree(buf);
-		return -ENOSPC;
-	}
-
-	len = simple_read_from_buffer(buffer, count, ppos, buf, strlen(buf));
-	kfree(buf);
-
-	return len;
-}
-
-static const struct file_operations drop_counter_fops = {
-	.owner = THIS_MODULE,
-	.open = simple_open,
-	.read = drop_counter_read,
-};
-
-static void l2_table_print_entry(struct seq_file *m, struct rtl838x_switch_priv *priv,
-				 struct rtl838x_l2_entry *e)
-{
-	u64 portmask;
-	int i;
-
-	if (e->type == L2_UNICAST) {
-		seq_puts(m, "L2_UNICAST\n");
-
-		seq_printf(m, "  mac %02x:%02x:%02x:%02x:%02x:%02x vid %u rvid %u\n",
-			e->mac[0], e->mac[1], e->mac[2], e->mac[3], e->mac[4], e->mac[5],
-			e->vid, e->rvid);
-
-		seq_printf(m, "  port %d age %d", e->port, e->age);
-		if (e->is_static)
-			seq_puts(m, " static");
-		if (e->block_da)
-			seq_puts(m, " block_da");
-		if (e->block_sa)
-			seq_puts(m, " block_sa");
-		if (e->suspended)
-			seq_puts(m, " suspended");
-		if (e->next_hop)
-			seq_printf(m, " next_hop route_id %u", e->nh_route_id);
-		seq_puts(m, "\n");
-
-	} else {
-		if (e->type == L2_MULTICAST) {
-			seq_puts(m, "L2_MULTICAST\n");
-
-			seq_printf(m, "  mac %02x:%02x:%02x:%02x:%02x:%02x vid %u rvid %u\n",
-				e->mac[0], e->mac[1], e->mac[2], e->mac[3], e->mac[4], e->mac[5],
-				e->vid, e->rvid);
-		}
-
-		if (e->type == IP4_MULTICAST || e->type == IP6_MULTICAST) {
-			seq_puts(m, (e->type == IP4_MULTICAST) ?
-				    "IP4_MULTICAST\n" : "IP6_MULTICAST\n");
-
-			seq_printf(m, "  gip %08x sip %08x vid %u rvid %u\n",
-				e->mc_gip, e->mc_sip, e->vid, e->rvid);
-		}
-
-		portmask = priv->r->read_mcast_pmask(e->mc_portmask_index);
-		seq_printf(m, "  index %u ports", e->mc_portmask_index);
-		for (i = 0; i < 64; i++) {
-			if (portmask & BIT_ULL(i))
-				seq_printf(m, " %d", i);
-		}
-		seq_puts(m, "\n");
-	}
-
-	seq_puts(m, "\n");
-}
-
-static int l2_table_show(struct seq_file *m, void *v)
-{
-	struct rtl838x_switch_priv *priv = m->private;
-	struct rtl838x_l2_entry e;
-	int i, bucket, index;
-
-	mutex_lock(&priv->reg_mutex);
-
-	for (i = 0; i < priv->fib_entries; i++) {
-		bucket = i >> 2;
-		index = i & 0x3;
-		priv->r->read_l2_entry_using_hash(bucket, index, &e);
-
-		if (!e.valid)
-			continue;
-
-		seq_printf(m, "Hash table bucket %d index %d ", bucket, index);
-		l2_table_print_entry(m, priv, &e);
-
-		if (!((i + 1) % 64))
-			cond_resched();
-	}
-
-	for (i = 0; i < 64; i++) {
-		priv->r->read_cam(i, &e);
-
-		if (!e.valid)
-			continue;
-
-		seq_printf(m, "CAM index %d ", i);
-		l2_table_print_entry(m, priv, &e);
-	}
-
-	mutex_unlock(&priv->reg_mutex);
-
-	return 0;
-}
-
-static int l2_table_open(struct inode *inode, struct file *filp)
-{
-	return single_open(filp, l2_table_show, inode->i_private);
-}
-
-static const struct file_operations l2_table_fops = {
-	.owner = THIS_MODULE,
-	.open = l2_table_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-
-static ssize_t age_out_read(struct file *filp, char __user *buffer, size_t count,
-			     loff_t *ppos)
-{
-	struct rtl838x_port *p = filp->private_data;
-	struct dsa_switch *ds = p->dp->ds;
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int value = sw_r32(priv->r->l2_port_aging_out);
-
-	if (value < 0)
-		return -EINVAL;
-
-	return rtl838x_common_read(buffer, count, ppos, (u32)value);
-}
-
-static ssize_t age_out_write(struct file *filp, const char __user *buffer,
-				size_t count, loff_t *ppos)
-{
-	struct rtl838x_port *p = filp->private_data;
-	u32 value;
-	size_t res = rtl838x_common_write(buffer, count, ppos, &value);
-	if (res < 0)
-		return res;
-
-	rtl83xx_fast_age(p->dp->ds, p->dp->index);
-
-	return res;
-}
-
-static const struct file_operations age_out_fops = {
-	.owner = THIS_MODULE,
-	.open = simple_open,
-	.read = age_out_read,
-	.write = age_out_write,
-};
-
-static ssize_t port_egress_rate_read(struct file *filp, char __user *buffer, size_t count,
-				loff_t *ppos)
-{
-	struct rtl838x_port *p = filp->private_data;
-	struct dsa_switch *ds = p->dp->ds;
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int value;
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		value = rtl838x_get_egress_rate(priv, p->dp->index);
-	else
-		value = rtl839x_get_egress_rate(priv, p->dp->index);
-
-	if (value < 0)
-		return -EINVAL;
-
-	return rtl838x_common_read(buffer, count, ppos, (u32)value);
-}
-
-static ssize_t port_egress_rate_write(struct file *filp, const char __user *buffer,
-				size_t count, loff_t *ppos)
-{
-	struct rtl838x_port *p = filp->private_data;
-	struct dsa_switch *ds = p->dp->ds;
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u32 value;
-	size_t res = rtl838x_common_write(buffer, count, ppos, &value);
-	if (res < 0)
-		return res;
-
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		rtl838x_set_egress_rate(priv, p->dp->index, value);
-	else
-		rtl839x_set_egress_rate(priv, p->dp->index, value);
-
-	return res;
-}
-
-static const struct file_operations port_egress_fops = {
-	.owner = THIS_MODULE,
-	.open = simple_open,
-	.read = port_egress_rate_read,
-	.write = port_egress_rate_write,
-};
-
-
-static const struct debugfs_reg32 port_ctrl_regs[] = {
-	{ .name = "port_isolation", .offset = RTL838X_PORT_ISO_CTRL(0), },
-	{ .name = "mac_force_mode", .offset = RTL838X_MAC_FORCE_MODE_CTRL, },
-};
-
-void rtl838x_dbgfs_cleanup(struct rtl838x_switch_priv *priv)
-{
-	debugfs_remove_recursive(priv->dbgfs_dir);
-
-//	kfree(priv->dbgfs_entries);
-}
-
-static int rtl838x_dbgfs_port_init(struct dentry *parent, struct rtl838x_switch_priv *priv,
-				   int port)
-{
-	struct dentry *port_dir;
-	struct debugfs_regset32 *port_ctrl_regset;
-
-	port_dir = debugfs_create_dir(priv->ports[port].dp->name, parent);
-
-	if (priv->family_id == RTL8380_FAMILY_ID) {
-		debugfs_create_x32("storm_rate_uc", 0644, port_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL838X_STORM_CTRL_PORT_UC(port)));
-
-		debugfs_create_x32("storm_rate_mc", 0644, port_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL838X_STORM_CTRL_PORT_MC(port)));
-
-		debugfs_create_x32("storm_rate_bc", 0644, port_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL838X_STORM_CTRL_PORT_BC(port)));
-	} else {
-		debugfs_create_x32("storm_rate_uc", 0644, port_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL839X_STORM_CTRL_PORT_UC_0(port)));
-
-		debugfs_create_x32("storm_rate_mc", 0644, port_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL839X_STORM_CTRL_PORT_MC_0(port)));
-
-		debugfs_create_x32("storm_rate_bc", 0644, port_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL839X_STORM_CTRL_PORT_BC_0(port)));
-	}
-
-	debugfs_create_u32("id", 0444, port_dir, (u32 *)&priv->ports[port].dp->index);
-
-	port_ctrl_regset = devm_kzalloc(priv->dev, sizeof(*port_ctrl_regset), GFP_KERNEL);
-	if (!port_ctrl_regset)
-		return -ENOMEM;
-
-	port_ctrl_regset->regs = port_ctrl_regs;
-	port_ctrl_regset->nregs = ARRAY_SIZE(port_ctrl_regs);
-	port_ctrl_regset->base = (void *)(RTL838X_SW_BASE + (port << 2));
-	debugfs_create_regset32("port_ctrl", 0400, port_dir, port_ctrl_regset);
-
-	debugfs_create_file("stp_state", 0600, port_dir, &priv->ports[port], &stp_state_fops);
-	debugfs_create_file("age_out", 0600, port_dir, &priv->ports[port], &age_out_fops);
-	debugfs_create_file("port_egress_rate", 0600, port_dir, &priv->ports[port],
-			    &port_egress_fops);
-	return 0;
-}
-
-static int rtl838x_dbgfs_leds(struct dentry *parent, struct rtl838x_switch_priv *priv)
-{
-	struct dentry *led_dir;
-	int p;
-	char led_sw_p_ctrl_name[20];
-	char port_led_name[20];
-
-	led_dir = debugfs_create_dir("led", parent);
-
-	if (priv->family_id == RTL8380_FAMILY_ID) {
-		debugfs_create_x32("led_glb_ctrl", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8380_LED_GLB_CTRL));
-		debugfs_create_x32("led_mode_sel", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8380_LED_MODE_SEL));
-		debugfs_create_x32("led_mode_ctrl", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8380_LED_MODE_CTRL));
-		debugfs_create_x32("led_p_en_ctrl", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8380_LED_P_EN_CTRL));
-		debugfs_create_x32("led_sw_ctrl", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8380_LED_SW_CTRL));
-		debugfs_create_x32("led0_sw_p_en_ctrl", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8380_LED0_SW_P_EN_CTRL));
-		debugfs_create_x32("led1_sw_p_en_ctrl", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8380_LED1_SW_P_EN_CTRL));
-		debugfs_create_x32("led2_sw_p_en_ctrl", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8380_LED2_SW_P_EN_CTRL));
-		for (p = 0; p < 28; p++) {
-			snprintf(led_sw_p_ctrl_name, sizeof(led_sw_p_ctrl_name),
-				 "led_sw_p_ctrl.%02d", p);
-			debugfs_create_x32(led_sw_p_ctrl_name, 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8380_LED_SW_P_CTRL(p)));
-		}
-	} else if (priv->family_id == RTL8390_FAMILY_ID) {
-		debugfs_create_x32("led_glb_ctrl", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_GLB_CTRL));
-		debugfs_create_x32("led_set_2_3", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_SET_2_3_CTRL));
-		debugfs_create_x32("led_set_0_1", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_SET_0_1_CTRL));
-		for (p = 0; p < 4; p++) {
-			snprintf(port_led_name, sizeof(port_led_name), "led_copr_set_sel.%1d", p);
-			debugfs_create_x32(port_led_name, 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_COPR_SET_SEL_CTRL(p << 4)));
-			snprintf(port_led_name, sizeof(port_led_name), "led_fib_set_sel.%1d", p);
-			debugfs_create_x32(port_led_name, 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_FIB_SET_SEL_CTRL(p << 4)));
-		}
-		debugfs_create_x32("led_copr_pmask_ctrl_0", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_COPR_PMASK_CTRL(0)));
-		debugfs_create_x32("led_copr_pmask_ctrl_1", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_COPR_PMASK_CTRL(32)));
-		debugfs_create_x32("led_fib_pmask_ctrl_0", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_FIB_PMASK_CTRL(0)));
-		debugfs_create_x32("led_fib_pmask_ctrl_1", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_FIB_PMASK_CTRL(32)));
-		debugfs_create_x32("led_combo_ctrl_0", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_COMBO_CTRL(0)));
-		debugfs_create_x32("led_combo_ctrl_1", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_COMBO_CTRL(32)));
-		debugfs_create_x32("led_sw_ctrl", 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_SW_CTRL));
-		for (p = 0; p < 5; p++) {
-			snprintf(port_led_name, sizeof(port_led_name), "led_sw_p_en_ctrl.%1d", p);
-			debugfs_create_x32(port_led_name, 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_SW_P_EN_CTRL(p * 10)));
-		}
-		for (p = 0; p < 28; p++) {
-			snprintf(port_led_name, sizeof(port_led_name), "led_sw_p_ctrl.%02d", p);
-			debugfs_create_x32(port_led_name, 0644, led_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL8390_LED_SW_P_CTRL(p)));
-		}
-	}
-	return 0;
-}
-
-void rtl838x_dbgfs_init(struct rtl838x_switch_priv *priv)
-{
-	struct dentry *rtl838x_dir;
-	struct dentry *port_dir;
-	struct dentry *mirror_dir;
-	struct debugfs_regset32 *port_ctrl_regset;
-	int ret, i;
-	char lag_name[10];
-	char mirror_name[10];
-
-	pr_info("%s called\n", __func__);
-	rtl838x_dir = debugfs_lookup(RTL838X_DRIVER_NAME, NULL);
-	if (!rtl838x_dir)
-		rtl838x_dir = debugfs_create_dir(RTL838X_DRIVER_NAME, NULL);
-
-	priv->dbgfs_dir = rtl838x_dir;
-
-	debugfs_create_u32("soc", 0444, rtl838x_dir,
-			   (u32 *)(RTL838X_SW_BASE + RTL838X_MODEL_NAME_INFO));
-
-	/* Create one directory per port */
-	for (i = 0; i < priv->cpu_port; i++) {
-		if (priv->ports[i].phy) {
-			ret = rtl838x_dbgfs_port_init(rtl838x_dir, priv, i);
-			if (ret)
-				goto err;
-		}
-	}
-
-	/* Create directory for CPU-port */
-	port_dir = debugfs_create_dir("cpu_port", rtl838x_dir);
-	port_ctrl_regset = devm_kzalloc(priv->dev, sizeof(*port_ctrl_regset), GFP_KERNEL);
-	if (!port_ctrl_regset) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	port_ctrl_regset->regs = port_ctrl_regs;
-	port_ctrl_regset->nregs = ARRAY_SIZE(port_ctrl_regs);
-	port_ctrl_regset->base = (void *)(RTL838X_SW_BASE + (priv->cpu_port << 2));
-	debugfs_create_regset32("port_ctrl", 0400, port_dir, port_ctrl_regset);
-	debugfs_create_u8("id", 0444, port_dir, &priv->cpu_port);
-
-	/* Create entries for LAGs */
-	for (i = 0; i < priv->n_lags; i++) {
-		snprintf(lag_name, sizeof(lag_name), "lag.%02d", i);
-		if (priv->family_id == RTL8380_FAMILY_ID)
-			debugfs_create_x32(lag_name, 0644, rtl838x_dir,
-				(u32 *)(RTL838X_SW_BASE + priv->r->trk_mbr_ctr(i)));
-		else
-			debugfs_create_x64(lag_name, 0644, rtl838x_dir,
-				(u64 *)(RTL838X_SW_BASE + priv->r->trk_mbr_ctr(i)));
-	}
-
-	/* Create directories for mirror groups */
-	for (i = 0; i < 4; i++) {
-		snprintf(mirror_name, sizeof(mirror_name), "mirror.%1d", i);
-		mirror_dir = debugfs_create_dir(mirror_name, rtl838x_dir);
-		if (priv->family_id == RTL8380_FAMILY_ID) {
-			debugfs_create_x32("ctrl", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL838X_MIR_CTRL + i * 4));
-			debugfs_create_x32("ingress_pm", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + priv->r->mir_spm + i * 4));
-			debugfs_create_x32("egress_pm", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + priv->r->mir_dpm + i * 4));
-			debugfs_create_x32("qid", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL838X_MIR_QID_CTRL(i)));
-			debugfs_create_x32("rspan_vlan", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL838X_MIR_RSPAN_VLAN_CTRL(i)));
-			debugfs_create_x32("rspan_vlan_mac", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL838X_MIR_RSPAN_VLAN_CTRL_MAC(i)));
-			debugfs_create_x32("rspan_tx", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL838X_MIR_RSPAN_TX_CTRL));
-			debugfs_create_x32("rspan_tx_tag_rm", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL838X_MIR_RSPAN_TX_TAG_RM_CTRL));
-			debugfs_create_x32("rspan_tx_tag_en", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL838X_MIR_RSPAN_TX_TAG_EN_CTRL));
-		} else {
-			debugfs_create_x32("ctrl", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL839X_MIR_CTRL + i * 4));
-			debugfs_create_x64("ingress_pm", 0644, mirror_dir,
-				(u64 *)(RTL838X_SW_BASE + priv->r->mir_spm + i * 8));
-			debugfs_create_x64("egress_pm", 0644, mirror_dir,
-				(u64 *)(RTL838X_SW_BASE + priv->r->mir_dpm + i * 8));
-			debugfs_create_x32("rspan_vlan", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL839X_MIR_RSPAN_VLAN_CTRL(i)));
-			debugfs_create_x32("rspan_tx", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL839X_MIR_RSPAN_TX_CTRL));
-			debugfs_create_x32("rspan_tx_tag_rm", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL839X_MIR_RSPAN_TX_TAG_RM_CTRL));
-			debugfs_create_x32("rspan_tx_tag_en", 0644, mirror_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL839X_MIR_RSPAN_TX_TAG_EN_CTRL));
-			debugfs_create_x64("sample_rate", 0644, mirror_dir,
-				(u64 *)(RTL838X_SW_BASE + RTL839X_MIR_SAMPLE_RATE_CTRL));
-		}
-	}
-
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		debugfs_create_x32("bpdu_flood_mask", 0644, rtl838x_dir,
-				(u32 *)(RTL838X_SW_BASE + priv->r->rma_bpdu_fld_pmask));
-	else
-		debugfs_create_x64("bpdu_flood_mask", 0644, rtl838x_dir,
-				(u64 *)(RTL838X_SW_BASE + priv->r->rma_bpdu_fld_pmask));
-
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		debugfs_create_x32("vlan_ctrl", 0644, rtl838x_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL838X_VLAN_CTRL));
-	else
-		debugfs_create_x32("vlan_ctrl", 0644, rtl838x_dir,
-				(u32 *)(RTL838X_SW_BASE + RTL839X_VLAN_CTRL));
-
-	ret = rtl838x_dbgfs_leds(rtl838x_dir, priv);
-	if (ret)
-		goto err;
-
-	debugfs_create_file("drop_counters", 0400, rtl838x_dir, priv, &drop_counter_fops);
-
-	debugfs_create_file("l2_table", 0400, rtl838x_dir, priv, &l2_table_fops);
-
-	return;
-err:
-	rtl838x_dbgfs_cleanup(priv);
-}
-
-void rtl930x_dbgfs_init(struct rtl838x_switch_priv *priv)
-{
-	struct dentry *dbg_dir;
-
-	pr_info("%s called\n", __func__);
-	dbg_dir = debugfs_lookup(RTL838X_DRIVER_NAME, NULL);
-	if (!dbg_dir)
-		dbg_dir = debugfs_create_dir(RTL838X_DRIVER_NAME, NULL);
-
-	priv->dbgfs_dir = dbg_dir;
-
-	debugfs_create_file("drop_counters", 0400, dbg_dir, priv, &drop_counter_fops);
-
-	debugfs_create_file("l2_table", 0400, dbg_dir, priv, &l2_table_fops);
-}
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c
deleted file mode 100644
index bff42b088ad6..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c
+++ /dev/null
@@ -1,2234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <net/dsa.h>
-#include <linux/if_bridge.h>
-
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-#include "rtl83xx.h"
-
-
-extern struct rtl83xx_soc_info soc_info;
-
-
-static void rtl83xx_init_stats(struct rtl838x_switch_priv *priv)
-{
-	mutex_lock(&priv->reg_mutex);
-
-	/* Enable statistics module: all counters plus debug.
-	 * On RTL839x all counters are enabled by default
-	 */
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		sw_w32_mask(0, 3, RTL838X_STAT_CTRL);
-
-	/* Reset statistics counters */
-	sw_w32_mask(0, 1, priv->r->stat_rst);
-
-	mutex_unlock(&priv->reg_mutex);
-}
-
-static void rtl83xx_enable_phy_polling(struct rtl838x_switch_priv *priv)
-{
-	int i;
-	u64 v = 0;
-
-	msleep(1000);
-	/* Enable all ports with a PHY, including the SFP-ports */
-	for (i = 0; i < priv->cpu_port; i++) {
-		if (priv->ports[i].phy)
-			v |= BIT_ULL(i);
-	}
-
-	pr_info("%s: %16llx\n", __func__, v);
-	priv->r->set_port_reg_le(v, priv->r->smi_poll_ctrl);
-
-	/* PHY update complete, there is no global PHY polling enable bit on the 9300 */
-	if (priv->family_id == RTL8390_FAMILY_ID)
-		sw_w32_mask(0, BIT(7), RTL839X_SMI_GLB_CTRL);
-	else if(priv->family_id == RTL9300_FAMILY_ID)
-		sw_w32_mask(0, 0x8000, RTL838X_SMI_GLB_CTRL);
-}
-
-const struct rtl83xx_mib_desc rtl83xx_mib[] = {
-	MIB_DESC(2, 0xf8, "ifInOctets"),
-	MIB_DESC(2, 0xf0, "ifOutOctets"),
-	MIB_DESC(1, 0xec, "dot1dTpPortInDiscards"),
-	MIB_DESC(1, 0xe8, "ifInUcastPkts"),
-	MIB_DESC(1, 0xe4, "ifInMulticastPkts"),
-	MIB_DESC(1, 0xe0, "ifInBroadcastPkts"),
-	MIB_DESC(1, 0xdc, "ifOutUcastPkts"),
-	MIB_DESC(1, 0xd8, "ifOutMulticastPkts"),
-	MIB_DESC(1, 0xd4, "ifOutBroadcastPkts"),
-	MIB_DESC(1, 0xd0, "ifOutDiscards"),
-	MIB_DESC(1, 0xcc, ".3SingleCollisionFrames"),
-	MIB_DESC(1, 0xc8, ".3MultipleCollisionFrames"),
-	MIB_DESC(1, 0xc4, ".3DeferredTransmissions"),
-	MIB_DESC(1, 0xc0, ".3LateCollisions"),
-	MIB_DESC(1, 0xbc, ".3ExcessiveCollisions"),
-	MIB_DESC(1, 0xb8, ".3SymbolErrors"),
-	MIB_DESC(1, 0xb4, ".3ControlInUnknownOpcodes"),
-	MIB_DESC(1, 0xb0, ".3InPauseFrames"),
-	MIB_DESC(1, 0xac, ".3OutPauseFrames"),
-	MIB_DESC(1, 0xa8, "DropEvents"),
-	MIB_DESC(1, 0xa4, "tx_BroadcastPkts"),
-	MIB_DESC(1, 0xa0, "tx_MulticastPkts"),
-	MIB_DESC(1, 0x9c, "CRCAlignErrors"),
-	MIB_DESC(1, 0x98, "tx_UndersizePkts"),
-	MIB_DESC(1, 0x94, "rx_UndersizePkts"),
-	MIB_DESC(1, 0x90, "rx_UndersizedropPkts"),
-	MIB_DESC(1, 0x8c, "tx_OversizePkts"),
-	MIB_DESC(1, 0x88, "rx_OversizePkts"),
-	MIB_DESC(1, 0x84, "Fragments"),
-	MIB_DESC(1, 0x80, "Jabbers"),
-	MIB_DESC(1, 0x7c, "Collisions"),
-	MIB_DESC(1, 0x78, "tx_Pkts64Octets"),
-	MIB_DESC(1, 0x74, "rx_Pkts64Octets"),
-	MIB_DESC(1, 0x70, "tx_Pkts65to127Octets"),
-	MIB_DESC(1, 0x6c, "rx_Pkts65to127Octets"),
-	MIB_DESC(1, 0x68, "tx_Pkts128to255Octets"),
-	MIB_DESC(1, 0x64, "rx_Pkts128to255Octets"),
-	MIB_DESC(1, 0x60, "tx_Pkts256to511Octets"),
-	MIB_DESC(1, 0x5c, "rx_Pkts256to511Octets"),
-	MIB_DESC(1, 0x58, "tx_Pkts512to1023Octets"),
-	MIB_DESC(1, 0x54, "rx_Pkts512to1023Octets"),
-	MIB_DESC(1, 0x50, "tx_Pkts1024to1518Octets"),
-	MIB_DESC(1, 0x4c, "rx_StatsPkts1024to1518Octets"),
-	MIB_DESC(1, 0x48, "tx_Pkts1519toMaxOctets"),
-	MIB_DESC(1, 0x44, "rx_Pkts1519toMaxOctets"),
-	MIB_DESC(1, 0x40, "rxMacDiscards")
-};
-
-
-/* DSA callbacks */
-
-
-static enum dsa_tag_protocol rtl83xx_get_tag_protocol(struct dsa_switch *ds,
-						      int port,
-						      enum dsa_tag_protocol mprot)
-{
-	/* The switch does not tag the frames, instead internally the header
-	 * structure for each packet is tagged accordingly.
-	 */
-	return DSA_TAG_PROTO_TRAILER;
-}
-
-/*
- * Initialize all VLANS
- */
-static void rtl83xx_vlan_setup(struct rtl838x_switch_priv *priv)
-{
-	struct rtl838x_vlan_info info;
-	int i;
-
-	pr_info("In %s\n", __func__);
-
-	priv->r->vlan_profile_setup(0);
-	priv->r->vlan_profile_setup(1);
-	pr_info("UNKNOWN_MC_PMASK: %016llx\n", priv->r->read_mcast_pmask(UNKNOWN_MC_PMASK));
-	priv->r->vlan_profile_dump(0);
-
-	info.fid = 0;			// Default Forwarding ID / MSTI
-	info.hash_uc_fid = false;	// Do not build the L2 lookup hash with FID, but VID
-	info.hash_mc_fid = false;	// Do the same for Multicast packets
-	info.profile_id = 0;		// Use default Vlan Profile 0
-	info.tagged_ports = 0;		// Initially no port members
-	if (priv->family_id == RTL9310_FAMILY_ID) {
-		info.if_id = 0;
-		info.multicast_grp_mask = 0;
-		info.l2_tunnel_list_id = -1;
-	}
-
-	// Initialize all vlans 0-4095
-	for (i = 0; i < MAX_VLANS; i ++)
-		priv->r->vlan_set_tagged(i, &info);
-
-	// reset PVIDs; defaults to 1 on reset
-	for (i = 0; i <= priv->ds->num_ports; i++) {
-		priv->r->vlan_port_pvid_set(i, PBVLAN_TYPE_INNER, 0);
-		priv->r->vlan_port_pvid_set(i, PBVLAN_TYPE_OUTER, 0);
-		priv->r->vlan_port_pvidmode_set(i, PBVLAN_TYPE_INNER, PBVLAN_MODE_UNTAG_AND_PRITAG);
-		priv->r->vlan_port_pvidmode_set(i, PBVLAN_TYPE_OUTER, PBVLAN_MODE_UNTAG_AND_PRITAG);
-	}
-
-	// Set forwarding action based on inner VLAN tag
-	for (i = 0; i < priv->cpu_port; i++)
-		priv->r->vlan_fwd_on_inner(i, true);
-}
-
-static void rtl83xx_setup_bpdu_traps(struct rtl838x_switch_priv *priv)
-{
-	int i;
-
-	for (i = 0; i < priv->cpu_port; i++)
-		priv->r->set_receive_management_action(i, BPDU, COPY2CPU);
-}
-
-static void rtl83xx_port_set_salrn(struct rtl838x_switch_priv *priv,
-				   int port, bool enable)
-{
-	int shift = SALRN_PORT_SHIFT(port);
-	int val = enable ? SALRN_MODE_HARDWARE : SALRN_MODE_DISABLED;
-
-	sw_w32_mask(SALRN_MODE_MASK << shift, val << shift,
-		    priv->r->l2_port_new_salrn(port));
-}
-
-static int rtl83xx_setup(struct dsa_switch *ds)
-{
-	int i;
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	pr_debug("%s called\n", __func__);
-
-	/* Disable MAC polling the PHY so that we can start configuration */
-	priv->r->set_port_reg_le(0ULL, priv->r->smi_poll_ctrl);
-
-	for (i = 0; i < ds->num_ports; i++)
-		priv->ports[i].enable = false;
-	priv->ports[priv->cpu_port].enable = true;
-
-	/* Configure ports so they are disabled by default, but once enabled
-	 * they will work in isolated mode (only traffic between port and CPU).
-	 */
-	for (i = 0; i < priv->cpu_port; i++) {
-		if (priv->ports[i].phy) {
-			priv->ports[i].pm = BIT_ULL(priv->cpu_port);
-			priv->r->traffic_set(i, BIT_ULL(i));
-		}
-	}
-	priv->r->traffic_set(priv->cpu_port, BIT_ULL(priv->cpu_port));
-
-	/* For standalone ports, forward packets even if a static fdb
-	 * entry for the source address exists on another port.
-	 */
-	if (priv->r->set_static_move_action) {
-		for (i = 0; i <= priv->cpu_port; i++)
-			priv->r->set_static_move_action(i, true);
-	}
-
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		rtl838x_print_matrix();
-	else
-		rtl839x_print_matrix();
-
-	rtl83xx_init_stats(priv);
-
-	rtl83xx_vlan_setup(priv);
-
-	rtl83xx_setup_bpdu_traps(priv);
-
-	ds->configure_vlan_while_not_filtering = true;
-
-	priv->r->l2_learning_setup();
-
-	rtl83xx_port_set_salrn(priv, priv->cpu_port, false);
-	ds->assisted_learning_on_cpu_port = true;
-
-	/*
-	 *  Make sure all frames sent to the switch's MAC are trapped to the CPU-port
-	 *  0: FWD, 1: DROP, 2: TRAP2CPU
-	 */
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		sw_w32(0x2, RTL838X_SPCL_TRAP_SWITCH_MAC_CTRL);
-	else
-		sw_w32(0x2, RTL839X_SPCL_TRAP_SWITCH_MAC_CTRL);
-
-	/* Enable MAC Polling PHY again */
-	rtl83xx_enable_phy_polling(priv);
-	pr_debug("Please wait until PHY is settled\n");
-	msleep(1000);
-	priv->r->pie_init(priv);
-
-	return 0;
-}
-
-static int rtl93xx_setup(struct dsa_switch *ds)
-{
-	int i;
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	pr_info("%s called\n", __func__);
-
-	/* Disable MAC polling the PHY so that we can start configuration */
-	if (priv->family_id == RTL9300_FAMILY_ID)
-		sw_w32(0, RTL930X_SMI_POLL_CTRL);
-
-	if (priv->family_id == RTL9310_FAMILY_ID) {
-		sw_w32(0, RTL931X_SMI_PORT_POLLING_CTRL);
-		sw_w32(0, RTL931X_SMI_PORT_POLLING_CTRL + 4);
-	}
-
-	// Disable all ports except CPU port
-	for (i = 0; i < ds->num_ports; i++)
-		priv->ports[i].enable = false;
-	priv->ports[priv->cpu_port].enable = true;
-
-	/* Configure ports so they are disabled by default, but once enabled
-	 * they will work in isolated mode (only traffic between port and CPU).
-	 */
-	for (i = 0; i < priv->cpu_port; i++) {
-		if (priv->ports[i].phy) {
-			priv->ports[i].pm = BIT_ULL(priv->cpu_port);
-			priv->r->traffic_set(i, BIT_ULL(i));
-		}
-	}
-	priv->r->traffic_set(priv->cpu_port, BIT_ULL(priv->cpu_port));
-
-	rtl930x_print_matrix();
-
-	// TODO: Initialize statistics
-
-	rtl83xx_vlan_setup(priv);
-
-	ds->configure_vlan_while_not_filtering = true;
-
-	priv->r->l2_learning_setup();
-
-	rtl83xx_port_set_salrn(priv, priv->cpu_port, false);
-	ds->assisted_learning_on_cpu_port = true;
-
-	rtl83xx_enable_phy_polling(priv);
-
-	priv->r->pie_init(priv);
-
-	priv->r->led_init(priv);
-
-	return 0;
-}
-
-static int rtl93xx_get_sds(struct phy_device *phydev)
-{
-	struct device *dev = &phydev->mdio.dev;
-	struct device_node *dn;
-	u32 sds_num;
-
-	if (!dev)
-		return -1;
-	if (dev->of_node) {
-		dn = dev->of_node;
-		if (of_property_read_u32(dn, "sds", &sds_num))
-			sds_num = -1;
-	} else {
-		dev_err(dev, "No DT node.\n");
-		return -1;
-	}
-
-	return sds_num;
-}
-
-static void rtl83xx_phylink_validate(struct dsa_switch *ds, int port,
-				     unsigned long *supported,
-				     struct phylink_link_state *state)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-
-	pr_debug("In %s port %d, state is %d", __func__, port, state->interface);
-
-	if (!phy_interface_mode_is_rgmii(state->interface) &&
-	    state->interface != PHY_INTERFACE_MODE_NA &&
-	    state->interface != PHY_INTERFACE_MODE_1000BASEX &&
-	    state->interface != PHY_INTERFACE_MODE_MII &&
-	    state->interface != PHY_INTERFACE_MODE_REVMII &&
-	    state->interface != PHY_INTERFACE_MODE_GMII &&
-	    state->interface != PHY_INTERFACE_MODE_QSGMII &&
-	    state->interface != PHY_INTERFACE_MODE_INTERNAL &&
-	    state->interface != PHY_INTERFACE_MODE_SGMII) {
-		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-		dev_err(ds->dev,
-			"Unsupported interface: %d for port %d\n",
-			state->interface, port);
-		return;
-	}
-
-	/* Allow all the expected bits */
-	phylink_set(mask, Autoneg);
-	phylink_set_port_modes(mask);
-	phylink_set(mask, Pause);
-	phylink_set(mask, Asym_Pause);
-
-	/* With the exclusion of MII and Reverse MII, we support Gigabit,
-	 * including Half duplex
-	 */
-	if (state->interface != PHY_INTERFACE_MODE_MII &&
-	    state->interface != PHY_INTERFACE_MODE_REVMII) {
-		phylink_set(mask, 1000baseT_Full);
-		phylink_set(mask, 1000baseT_Half);
-	}
-
-	/* On both the 8380 and 8382, ports 24-27 are SFP ports */
-	if (port >= 24 && port <= 27 && priv->family_id == RTL8380_FAMILY_ID)
-		phylink_set(mask, 1000baseX_Full);
-
-	/* On the RTL839x family of SoCs, ports 48 to 51 are SFP ports */
-	if (port >= 48 && port <= 51 && priv->family_id == RTL8390_FAMILY_ID)
-		phylink_set(mask, 1000baseX_Full);
-
-	phylink_set(mask, 10baseT_Half);
-	phylink_set(mask, 10baseT_Full);
-	phylink_set(mask, 100baseT_Half);
-	phylink_set(mask, 100baseT_Full);
-
-	bitmap_and(supported, supported, mask,
-		   __ETHTOOL_LINK_MODE_MASK_NBITS);
-	bitmap_and(state->advertising, state->advertising, mask,
-		   __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
-static void rtl93xx_phylink_validate(struct dsa_switch *ds, int port,
-				     unsigned long *supported,
-				     struct phylink_link_state *state)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-
-	pr_debug("In %s port %d, state is %d (%s)", __func__, port, state->interface,
-		 phy_modes(state->interface));
-
-	if (!phy_interface_mode_is_rgmii(state->interface) &&
-	    state->interface != PHY_INTERFACE_MODE_NA &&
-	    state->interface != PHY_INTERFACE_MODE_1000BASEX &&
-	    state->interface != PHY_INTERFACE_MODE_MII &&
-	    state->interface != PHY_INTERFACE_MODE_REVMII &&
-	    state->interface != PHY_INTERFACE_MODE_GMII &&
-	    state->interface != PHY_INTERFACE_MODE_QSGMII &&
-	    state->interface != PHY_INTERFACE_MODE_XGMII &&
-	    state->interface != PHY_INTERFACE_MODE_HSGMII &&
-	    state->interface != PHY_INTERFACE_MODE_10GBASER &&
-	    state->interface != PHY_INTERFACE_MODE_10GKR &&
-	    state->interface != PHY_INTERFACE_MODE_USXGMII &&
-	    state->interface != PHY_INTERFACE_MODE_INTERNAL &&
-	    state->interface != PHY_INTERFACE_MODE_SGMII) {
-		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-		dev_err(ds->dev,
-			"Unsupported interface: %d for port %d\n",
-			state->interface, port);
-		return;
-	}
-
-	/* Allow all the expected bits */
-	phylink_set(mask, Autoneg);
-	phylink_set_port_modes(mask);
-	phylink_set(mask, Pause);
-	phylink_set(mask, Asym_Pause);
-
-	/* With the exclusion of MII and Reverse MII, we support Gigabit,
-	 * including Half duplex
-	 */
-	if (state->interface != PHY_INTERFACE_MODE_MII &&
-	    state->interface != PHY_INTERFACE_MODE_REVMII) {
-		phylink_set(mask, 1000baseT_Full);
-		phylink_set(mask, 1000baseT_Half);
-	}
-
-	// Internal phys of the RTL93xx family provide 10G
-	if (priv->ports[port].phy_is_integrated
-		&& state->interface == PHY_INTERFACE_MODE_1000BASEX) {
-		phylink_set(mask, 1000baseX_Full);
-	} else if (priv->ports[port].phy_is_integrated) {
-		phylink_set(mask, 1000baseX_Full);
-		phylink_set(mask, 10000baseKR_Full);
-		phylink_set(mask, 10000baseSR_Full);
-		phylink_set(mask, 10000baseCR_Full);
-	}
-	if (state->interface == PHY_INTERFACE_MODE_INTERNAL) {
-		phylink_set(mask, 1000baseX_Full);
-		phylink_set(mask, 1000baseT_Full);
-		phylink_set(mask, 10000baseKR_Full);
-		phylink_set(mask, 10000baseT_Full);
-		phylink_set(mask, 10000baseSR_Full);
-		phylink_set(mask, 10000baseCR_Full);
-	}
-
-	if (state->interface == PHY_INTERFACE_MODE_USXGMII)
-		phylink_set(mask, 10000baseT_Full);
-
-	phylink_set(mask, 10baseT_Half);
-	phylink_set(mask, 10baseT_Full);
-	phylink_set(mask, 100baseT_Half);
-	phylink_set(mask, 100baseT_Full);
-
-	bitmap_and(supported, supported, mask,
-		   __ETHTOOL_LINK_MODE_MASK_NBITS);
-	bitmap_and(state->advertising, state->advertising, mask,
-		   __ETHTOOL_LINK_MODE_MASK_NBITS);
-	pr_debug("%s leaving supported: %*pb", __func__, __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
-}
-
-static int rtl83xx_phylink_mac_link_state(struct dsa_switch *ds, int port,
-					  struct phylink_link_state *state)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u64 speed;
-	u64 link;
-
-	if (port < 0 || port > priv->cpu_port)
-		return -EINVAL;
-
-	state->link = 0;
-	link = priv->r->get_port_reg_le(priv->r->mac_link_sts);
-	if (link & BIT_ULL(port))
-		state->link = 1;
-	pr_debug("%s: link state port %d: %llx\n", __func__, port, link & BIT_ULL(port));
-
-	state->duplex = 0;
-	if (priv->r->get_port_reg_le(priv->r->mac_link_dup_sts) & BIT_ULL(port))
-		state->duplex = 1;
-
-	speed = priv->r->get_port_reg_le(priv->r->mac_link_spd_sts(port));
-	speed >>= (port % 16) << 1;
-	switch (speed & 0x3) {
-	case 0:
-		state->speed = SPEED_10;
-		break;
-	case 1:
-		state->speed = SPEED_100;
-		break;
-	case 2:
-		state->speed = SPEED_1000;
-		break;
-	case 3:
-		if (priv->family_id == RTL9300_FAMILY_ID
-			&& (port == 24 || port == 26)) /* Internal serdes */
-			state->speed = SPEED_2500;
-		else
-			state->speed = SPEED_100; /* Is in fact 500Mbit */
-	}
-
-	state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX);
-	if (priv->r->get_port_reg_le(priv->r->mac_rx_pause_sts) & BIT_ULL(port))
-		state->pause |= MLO_PAUSE_RX;
-	if (priv->r->get_port_reg_le(priv->r->mac_tx_pause_sts) & BIT_ULL(port))
-		state->pause |= MLO_PAUSE_TX;
-	return 1;
-}
-
-static int rtl93xx_phylink_mac_link_state(struct dsa_switch *ds, int port,
-					  struct phylink_link_state *state)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u64 speed;
-	u64 link;
-	u64 media;
-
-	if (port < 0 || port > priv->cpu_port)
-		return -EINVAL;
-
-	/*
-	 * On the RTL9300 for at least the RTL8226B PHY, the MAC-side link
-	 * state needs to be read twice in order to read a correct result.
-	 * This would not be necessary for ports connected e.g. to RTL8218D
-	 * PHYs.
-	 */
-	state->link = 0;
-	link = priv->r->get_port_reg_le(priv->r->mac_link_sts);
-	link = priv->r->get_port_reg_le(priv->r->mac_link_sts);
-	if (link & BIT_ULL(port))
-		state->link = 1;
-
-	if (priv->family_id == RTL9310_FAMILY_ID)
-		media = priv->r->get_port_reg_le(RTL931X_MAC_LINK_MEDIA_STS);
-
-	if (priv->family_id == RTL9300_FAMILY_ID)
-		media = sw_r32(RTL930X_MAC_LINK_MEDIA_STS);
-
-	if (media & BIT_ULL(port))
-		state->link = 1;
-
-	pr_debug("%s: link state port %d: %llx, media %llx\n", __func__, port,
-		 link & BIT_ULL(port), media);
-
-	state->duplex = 0;
-	if (priv->r->get_port_reg_le(priv->r->mac_link_dup_sts) & BIT_ULL(port))
-		state->duplex = 1;
-
-	speed = priv->r->get_port_reg_le(priv->r->mac_link_spd_sts(port));
-	speed >>= (port % 8) << 2;
-	switch (speed & 0xf) {
-	case 0:
-		state->speed = SPEED_10;
-		break;
-	case 1:
-		state->speed = SPEED_100;
-		break;
-	case 2:
-	case 7:
-		state->speed = SPEED_1000;
-		break;
-	case 4:
-		state->speed = SPEED_10000;
-		break;
-	case 5:
-	case 8:
-		state->speed = SPEED_2500;
-		break;
-	case 6:
-		state->speed = SPEED_5000;
-		break;
-	default:
-		pr_err("%s: unknown speed: %d\n", __func__, (u32)speed & 0xf);
-	}
-
-	if (priv->family_id == RTL9310_FAMILY_ID
-		&& (port >= 52 || port <= 55)) { /* Internal serdes */
-			state->speed = SPEED_10000;
-			state->link = 1;
-			state->duplex = 1;
-	}
-
-	pr_debug("%s: speed is: %d %d\n", __func__, (u32)speed & 0xf, state->speed);
-	state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX);
-	if (priv->r->get_port_reg_le(priv->r->mac_rx_pause_sts) & BIT_ULL(port))
-		state->pause |= MLO_PAUSE_RX;
-	if (priv->r->get_port_reg_le(priv->r->mac_tx_pause_sts) & BIT_ULL(port))
-		state->pause |= MLO_PAUSE_TX;
-	return 1;
-}
-
-static void rtl83xx_config_interface(int port, phy_interface_t interface)
-{
-	u32 old, int_shift, sds_shift;
-
-	switch (port) {
-	case 24:
-		int_shift = 0;
-		sds_shift = 5;
-		break;
-	case 26:
-		int_shift = 3;
-		sds_shift = 0;
-		break;
-	default:
-		return;
-	}
-
-	old = sw_r32(RTL838X_SDS_MODE_SEL);
-	switch (interface) {
-	case PHY_INTERFACE_MODE_1000BASEX:
-		if ((old >> sds_shift & 0x1f) == 4)
-			return;
-		sw_w32_mask(0x7 << int_shift, 1 << int_shift, RTL838X_INT_MODE_CTRL);
-		sw_w32_mask(0x1f << sds_shift, 4 << sds_shift, RTL838X_SDS_MODE_SEL);
-		break;
-	case PHY_INTERFACE_MODE_SGMII:
-		if ((old >> sds_shift & 0x1f) == 2)
-			return;
-		sw_w32_mask(0x7 << int_shift, 2 << int_shift, RTL838X_INT_MODE_CTRL);
-		sw_w32_mask(0x1f << sds_shift, 2 << sds_shift, RTL838X_SDS_MODE_SEL);
-		break;
-	default:
-		return;
-	}
-	pr_debug("configured port %d for interface %s\n", port, phy_modes(interface));
-}
-
-static void rtl83xx_phylink_mac_config(struct dsa_switch *ds, int port,
-					unsigned int mode,
-					const struct phylink_link_state *state)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u32 reg;
-	int speed_bit = priv->family_id == RTL8380_FAMILY_ID ? 4 : 3;
-
-	pr_debug("%s port %d, mode %x\n", __func__, port, mode);
-
-	if (port == priv->cpu_port) {
-		/* Set Speed, duplex, flow control
-		 * FORCE_EN | LINK_EN | NWAY_EN | DUP_SEL
-		 * | SPD_SEL = 0b10 | FORCE_FC_EN | PHY_MASTER_SLV_MANUAL_EN
-		 * | MEDIA_SEL
-		 */
-		if (priv->family_id == RTL8380_FAMILY_ID) {
-			sw_w32(0x6192F, priv->r->mac_force_mode_ctrl(priv->cpu_port));
-			/* allow CRC errors on CPU-port */
-			sw_w32_mask(0, 0x8, RTL838X_MAC_PORT_CTRL(priv->cpu_port));
-		} else {
-			sw_w32_mask(0, 3, priv->r->mac_force_mode_ctrl(priv->cpu_port));
-		}
-		return;
-	}
-
-	reg = sw_r32(priv->r->mac_force_mode_ctrl(port));
-	/* Auto-Negotiation does not work for MAC in RTL8390 */
-	if (priv->family_id == RTL8380_FAMILY_ID) {
-		if (mode == MLO_AN_PHY || phylink_autoneg_inband(mode)) {
-			pr_debug("PHY autonegotiates\n");
-			reg |= RTL838X_NWAY_EN;
-			sw_w32(reg, priv->r->mac_force_mode_ctrl(port));
-			rtl83xx_config_interface(port, state->interface);
-			return;
-		}
-	}
-
-	if (mode != MLO_AN_FIXED)
-		pr_debug("Fixed state.\n");
-
-	/* Clear id_mode_dis bit, and the existing port mode, let
-		 * RGMII_MODE_EN bet set by mac_link_{up,down}  */
-	if (priv->family_id == RTL8380_FAMILY_ID) {
-		reg &= ~(RTL838X_RX_PAUSE_EN | RTL838X_TX_PAUSE_EN);
-		if (state->pause & MLO_PAUSE_TXRX_MASK) {
-			if (state->pause & MLO_PAUSE_TX)
-				reg |= RTL838X_TX_PAUSE_EN;
-			reg |= RTL838X_RX_PAUSE_EN;
-		}
-	} else if (priv->family_id == RTL8390_FAMILY_ID) {
-		reg &= ~(RTL839X_RX_PAUSE_EN | RTL839X_TX_PAUSE_EN);
-		if (state->pause & MLO_PAUSE_TXRX_MASK) {
-			if (state->pause & MLO_PAUSE_TX)
-				reg |= RTL839X_TX_PAUSE_EN;
-			reg |= RTL839X_RX_PAUSE_EN;
-		}
-	}
-
-
-	reg &= ~(3 << speed_bit);
-	switch (state->speed) {
-	case SPEED_1000:
-		reg |= 2 << speed_bit;
-		break;
-	case SPEED_100:
-		reg |= 1 << speed_bit;
-		break;
-	default:
-		break; // Ignore, including 10MBit which has a speed value of 0
-	}
-
-	if (priv->family_id == RTL8380_FAMILY_ID) {
-		reg &= ~(RTL838X_DUPLEX_MODE | RTL838X_FORCE_LINK_EN);
-		if (state->link)
-			reg |= RTL838X_FORCE_LINK_EN;
-		if (state->duplex == RTL838X_DUPLEX_MODE)
-			reg |= RTL838X_DUPLEX_MODE;
-	} else if (priv->family_id == RTL8390_FAMILY_ID) {
-		reg &= ~(RTL839X_DUPLEX_MODE | RTL839X_FORCE_LINK_EN);
-		if (state->link)
-			reg |= RTL839X_FORCE_LINK_EN;
-		if (state->duplex == RTL839X_DUPLEX_MODE)
-			reg |= RTL839X_DUPLEX_MODE;
-	}
-
-	// LAG members must use DUPLEX and we need to enable the link
-	if (priv->lagmembers & BIT_ULL(port)) {
-		switch(priv->family_id) {
-		case RTL8380_FAMILY_ID:
-			reg |= (RTL838X_DUPLEX_MODE | RTL838X_FORCE_LINK_EN);
-		break;
-		case RTL8390_FAMILY_ID:
-			reg |= (RTL839X_DUPLEX_MODE | RTL839X_FORCE_LINK_EN);
-		break;
-		}
-	}
-
-	// Disable AN
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		reg &= ~RTL838X_NWAY_EN;
-	sw_w32(reg, priv->r->mac_force_mode_ctrl(port));
-}
-
-static void rtl931x_phylink_mac_config(struct dsa_switch *ds, int port,
-					unsigned int mode,
-					const struct phylink_link_state *state)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int sds_num;
-	u32 reg, band;
-
-	sds_num = priv->ports[port].sds_num;
-	pr_info("%s: speed %d sds_num %d\n", __func__, state->speed, sds_num);
-
-	switch (state->interface) {
-	case PHY_INTERFACE_MODE_HSGMII:
-		pr_info("%s setting mode PHY_INTERFACE_MODE_HSGMII\n", __func__);
-		band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_HSGMII);
-		rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_HSGMII);
-		band = rtl931x_sds_cmu_band_set(sds_num, true, 62, PHY_INTERFACE_MODE_HSGMII);
-		break;
-	case PHY_INTERFACE_MODE_1000BASEX:
-		band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_1000BASEX);
-		rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_1000BASEX);
-		break;
-	case PHY_INTERFACE_MODE_XGMII:
-		band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_XGMII);
-		rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_XGMII);
-		break;
-	case PHY_INTERFACE_MODE_10GBASER:
-	case PHY_INTERFACE_MODE_10GKR:
-		band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_10GBASER);
-		rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_10GBASER);
-		break;
-	case PHY_INTERFACE_MODE_USXGMII:
-		// Translates to MII_USXGMII_10GSXGMII
-		band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_USXGMII);
-		rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_USXGMII);
-		break;
-	case PHY_INTERFACE_MODE_SGMII:
-		pr_info("%s setting mode PHY_INTERFACE_MODE_SGMII\n", __func__);
-		band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_SGMII);
-		rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_SGMII);
-		band = rtl931x_sds_cmu_band_set(sds_num, true, 62, PHY_INTERFACE_MODE_SGMII);
-		break;
-	case PHY_INTERFACE_MODE_QSGMII:
-		band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_QSGMII);
-		rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_QSGMII);
-		break;
-	default:
-		pr_err("%s: unknown serdes mode: %s\n",
-			__func__, phy_modes(state->interface));
-		return;
-	}
-
-	reg = sw_r32(priv->r->mac_force_mode_ctrl(port));
-	pr_info("%s reading FORCE_MODE_CTRL: %08x\n", __func__, reg);
-
-	reg &= ~(RTL931X_DUPLEX_MODE | RTL931X_FORCE_EN | RTL931X_FORCE_LINK_EN);
-
-	reg &= ~(0xf << 12);
-	reg |= 0x2 << 12; // Set SMI speed to 0x2
-
-	reg |= RTL931X_TX_PAUSE_EN | RTL931X_RX_PAUSE_EN;
-
-	if (priv->lagmembers & BIT_ULL(port))
-		reg |= RTL931X_DUPLEX_MODE;
-
-	if (state->duplex == DUPLEX_FULL)
-		reg |= RTL931X_DUPLEX_MODE;
-
-	sw_w32(reg, priv->r->mac_force_mode_ctrl(port));
-
-}
-
-static void rtl93xx_phylink_mac_config(struct dsa_switch *ds, int port,
-					unsigned int mode,
-					const struct phylink_link_state *state)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int sds_num, sds_mode;
-	u32 reg;
-
-	pr_info("%s port %d, mode %x, phy-mode: %s, speed %d, link %d\n", __func__,
-		port, mode, phy_modes(state->interface), state->speed, state->link);
-
-	// Nothing to be done for the CPU-port
-	if (port == priv->cpu_port)
-		return;
-
-	if (priv->family_id == RTL9310_FAMILY_ID)
-		return rtl931x_phylink_mac_config(ds, port, mode, state);
-
-	sds_num = priv->ports[port].sds_num;
-	pr_info("%s SDS is %d\n", __func__, sds_num);
-	if (sds_num >= 0) {
-		switch (state->interface) {
-		case PHY_INTERFACE_MODE_HSGMII:
-			sds_mode = 0x12;
-			break;
-		case PHY_INTERFACE_MODE_1000BASEX:
-			sds_mode = 0x04;
-			break;
-		case PHY_INTERFACE_MODE_XGMII:
-			sds_mode = 0x10;
-			break;
-		case PHY_INTERFACE_MODE_10GBASER:
-		case PHY_INTERFACE_MODE_10GKR:
-			sds_mode = 0x1b; // 10G 1000X Auto
-			break;
-		case PHY_INTERFACE_MODE_USXGMII:
-			sds_mode = 0x0d;
-			break;
-		default:
-			pr_err("%s: unknown serdes mode: %s\n",
-			       __func__, phy_modes(state->interface));
-			return;
-		}
-		if (state->interface == PHY_INTERFACE_MODE_10GBASER)
-			rtl9300_serdes_setup(sds_num, state->interface);
-	}
-
-	reg = sw_r32(priv->r->mac_force_mode_ctrl(port));
-	reg &= ~(0xf << 3);
-
-	switch (state->speed) {
-	case SPEED_10000:
-		reg |= 4 << 3;
-		break;
-	case SPEED_5000:
-		reg |= 6 << 3;
-		break;
-	case SPEED_2500:
-		reg |= 5 << 3;
-		break;
-	case SPEED_1000:
-		reg |= 2 << 3;
-		break;
-	default:
-		reg |= 2 << 3;
-		break;
-	}
-
-	if (state->link)
-		reg |= RTL930X_FORCE_LINK_EN;
-
-	if (priv->lagmembers & BIT_ULL(port))
-		reg |= RTL930X_DUPLEX_MODE | RTL930X_FORCE_LINK_EN;
-
-	if (state->duplex == DUPLEX_FULL)
-		reg |= RTL930X_DUPLEX_MODE;
-
-	if (priv->ports[port].phy_is_integrated)
-		reg &= ~RTL930X_FORCE_EN; // Clear MAC_FORCE_EN to allow SDS-MAC link
-	else
-		reg |= RTL930X_FORCE_EN;
-
-	sw_w32(reg, priv->r->mac_force_mode_ctrl(port));
-}
-
-static void rtl83xx_phylink_mac_link_down(struct dsa_switch *ds, int port,
-				     unsigned int mode,
-				     phy_interface_t interface)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	/* Stop TX/RX to port */
-	sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(port));
-
-	// No longer force link
-	sw_w32_mask(0x3, 0, priv->r->mac_force_mode_ctrl(port));
-}
-
-static void rtl93xx_phylink_mac_link_down(struct dsa_switch *ds, int port,
-				     unsigned int mode,
-				     phy_interface_t interface)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u32 v = 0;
-
-	/* Stop TX/RX to port */
-	sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(port));
-
-	// No longer force link
-	if (priv->family_id == RTL9300_FAMILY_ID)
-		v = RTL930X_FORCE_EN | RTL930X_FORCE_LINK_EN;
-	else if (priv->family_id == RTL9310_FAMILY_ID)
-		v = RTL931X_FORCE_EN | RTL931X_FORCE_LINK_EN;
-	sw_w32_mask(v, 0, priv->r->mac_force_mode_ctrl(port));
-}
-
-static void rtl83xx_phylink_mac_link_up(struct dsa_switch *ds, int port,
-				   unsigned int mode,
-				   phy_interface_t interface,
-				   struct phy_device *phydev,
-				   int speed, int duplex,
-				   bool tx_pause, bool rx_pause)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	/* Restart TX/RX to port */
-	sw_w32_mask(0, 0x3, priv->r->mac_port_ctrl(port));
-	// TODO: Set speed/duplex/pauses
-}
-
-static void rtl93xx_phylink_mac_link_up(struct dsa_switch *ds, int port,
-				   unsigned int mode,
-				   phy_interface_t interface,
-				   struct phy_device *phydev,
-				   int speed, int duplex,
-				   bool tx_pause, bool rx_pause)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	/* Restart TX/RX to port */
-	sw_w32_mask(0, 0x3, priv->r->mac_port_ctrl(port));
-	// TODO: Set speed/duplex/pauses
-}
-
-static void rtl83xx_get_strings(struct dsa_switch *ds,
-				int port, u32 stringset, u8 *data)
-{
-	int i;
-
-	if (stringset != ETH_SS_STATS)
-		return;
-
-	for (i = 0; i < ARRAY_SIZE(rtl83xx_mib); i++)
-		strncpy(data + i * ETH_GSTRING_LEN, rtl83xx_mib[i].name,
-			ETH_GSTRING_LEN);
-}
-
-static void rtl83xx_get_ethtool_stats(struct dsa_switch *ds, int port,
-				      uint64_t *data)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	const struct rtl83xx_mib_desc *mib;
-	int i;
-	u64 h;
-
-	for (i = 0; i < ARRAY_SIZE(rtl83xx_mib); i++) {
-		mib = &rtl83xx_mib[i];
-
-		data[i] = sw_r32(priv->r->stat_port_std_mib + (port << 8) + 252 - mib->offset);
-		if (mib->size == 2) {
-			h = sw_r32(priv->r->stat_port_std_mib + (port << 8) + 248 - mib->offset);
-			data[i] |= h << 32;
-		}
-	}
-}
-
-static int rtl83xx_get_sset_count(struct dsa_switch *ds, int port, int sset)
-{
-	if (sset != ETH_SS_STATS)
-		return 0;
-
-	return ARRAY_SIZE(rtl83xx_mib);
-}
-
-static int rtl83xx_mc_group_alloc(struct rtl838x_switch_priv *priv, int port)
-{
-	int mc_group = find_first_zero_bit(priv->mc_group_bm, MAX_MC_GROUPS - 1);
-	u64 portmask;
-
-	if (mc_group >= MAX_MC_GROUPS - 1)
-		return -1;
-
-	set_bit(mc_group, priv->mc_group_bm);
-	portmask = BIT_ULL(port);
-	priv->r->write_mcast_pmask(mc_group, portmask);
-
-	return mc_group;
-}
-
-static u64 rtl83xx_mc_group_add_port(struct rtl838x_switch_priv *priv, int mc_group, int port)
-{
-	u64 portmask = priv->r->read_mcast_pmask(mc_group);
-
-	pr_debug("%s: %d\n", __func__, port);
-
-	portmask |= BIT_ULL(port);
-	priv->r->write_mcast_pmask(mc_group, portmask);
-
-	return portmask;
-}
-
-static u64 rtl83xx_mc_group_del_port(struct rtl838x_switch_priv *priv, int mc_group, int port)
-{
-	u64 portmask = priv->r->read_mcast_pmask(mc_group);
-
-	pr_debug("%s: %d\n", __func__, port);
-
-	portmask &= ~BIT_ULL(port);
-	priv->r->write_mcast_pmask(mc_group, portmask);
-	if (!portmask)
-		clear_bit(mc_group, priv->mc_group_bm);
-
-	return portmask;
-}
-
-static int rtl83xx_port_enable(struct dsa_switch *ds, int port,
-				struct phy_device *phydev)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u64 v;
-
-	pr_debug("%s: %x %d", __func__, (u32) priv, port);
-	priv->ports[port].enable = true;
-
-	/* enable inner tagging on egress, do not keep any tags */
-	priv->r->vlan_port_keep_tag_set(port, 0, 1);
-
-	if (dsa_is_cpu_port(ds, port))
-		return 0;
-
-	/* add port to switch mask of CPU_PORT */
-	priv->r->traffic_enable(priv->cpu_port, port);
-
-	if (priv->is_lagmember[port]) {
-		pr_debug("%s: %d is lag slave. ignore\n", __func__, port);
-		return 0;
-	}
-
-	/* add all other ports in the same bridge to switch mask of port */
-	v = priv->r->traffic_get(port);
-	v |= priv->ports[port].pm;
-	priv->r->traffic_set(port, v);
-
-	// TODO: Figure out if this is necessary
-	if (priv->family_id == RTL9300_FAMILY_ID) {
-		sw_w32_mask(0, BIT(port), RTL930X_L2_PORT_SABLK_CTRL);
-		sw_w32_mask(0, BIT(port), RTL930X_L2_PORT_DABLK_CTRL);
-	}
-
-	if (priv->ports[port].sds_num < 0)
-		priv->ports[port].sds_num = rtl93xx_get_sds(phydev);
-
-	return 0;
-}
-
-static void rtl83xx_port_disable(struct dsa_switch *ds, int port)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u64 v;
-
-	pr_debug("%s %x: %d", __func__, (u32)priv, port);
-	/* you can only disable user ports */
-	if (!dsa_is_user_port(ds, port))
-		return;
-
-	// BUG: This does not work on RTL931X
-	/* remove port from switch mask of CPU_PORT */
-	priv->r->traffic_disable(priv->cpu_port, port);
-
-	/* remove all other ports in the same bridge from switch mask of port */
-	v = priv->r->traffic_get(port);
-	v &= ~priv->ports[port].pm;
-	priv->r->traffic_set(port, v);
-
-	priv->ports[port].enable = false;
-}
-
-static int rtl83xx_set_mac_eee(struct dsa_switch *ds, int port,
-			       struct ethtool_eee *e)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	if (e->eee_enabled && !priv->eee_enabled) {
-		pr_info("Globally enabling EEE\n");
-		priv->r->init_eee(priv, true);
-	}
-
-	priv->r->port_eee_set(priv, port, e->eee_enabled);
-
-	if (e->eee_enabled)
-		pr_info("Enabled EEE for port %d\n", port);
-	else
-		pr_info("Disabled EEE for port %d\n", port);
-	return 0;
-}
-
-static int rtl83xx_get_mac_eee(struct dsa_switch *ds, int port,
-			       struct ethtool_eee *e)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	e->supported = SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full;
-
-	priv->r->eee_port_ability(priv, e, port);
-
-	e->eee_enabled = priv->ports[port].eee_enabled;
-
-	e->eee_active = !!(e->advertised & e->lp_advertised);
-
-	return 0;
-}
-
-static int rtl93xx_get_mac_eee(struct dsa_switch *ds, int port,
-			       struct ethtool_eee *e)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	e->supported = SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full
-			| SUPPORTED_2500baseX_Full;
-
-	priv->r->eee_port_ability(priv, e, port);
-
-	e->eee_enabled = priv->ports[port].eee_enabled;
-
-	e->eee_active = !!(e->advertised & e->lp_advertised);
-
-	return 0;
-}
-
-static int rtl83xx_set_ageing_time(struct dsa_switch *ds, unsigned int msec)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	priv->r->set_ageing_time(msec);
-	return 0;
-}
-
-static int rtl83xx_port_bridge_join(struct dsa_switch *ds, int port,
-					struct net_device *bridge)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u64 port_bitmap = BIT_ULL(priv->cpu_port), v;
-	int i;
-
-	pr_debug("%s %x: %d %llx", __func__, (u32)priv, port, port_bitmap);
-
-	if (priv->is_lagmember[port]) {
-		pr_debug("%s: %d is lag slave. ignore\n", __func__, port);
-		return 0;
-	}
-
-	mutex_lock(&priv->reg_mutex);
-	for (i = 0; i < ds->num_ports; i++) {
-		/* Add this port to the port matrix of the other ports in the
-		 * same bridge. If the port is disabled, port matrix is kept
-		 * and not being setup until the port becomes enabled.
-		 */
-		if (dsa_is_user_port(ds, i) && !priv->is_lagmember[i] && i != port) {
-			if (dsa_to_port(ds, i)->bridge_dev != bridge)
-				continue;
-			if (priv->ports[i].enable)
-				priv->r->traffic_enable(i, port);
-
-			priv->ports[i].pm |= BIT_ULL(port);
-			port_bitmap |= BIT_ULL(i);
-		}
-	}
-
-	/* Add all other ports to this port matrix. */
-	if (priv->ports[port].enable) {
-		priv->r->traffic_enable(priv->cpu_port, port);
-		v = priv->r->traffic_get(port);
-		v |= port_bitmap;
-		priv->r->traffic_set(port, v);
-	}
-	priv->ports[port].pm |= port_bitmap;
-
-	if (priv->r->set_static_move_action)
-		priv->r->set_static_move_action(port, false);
-
-	mutex_unlock(&priv->reg_mutex);
-
-	return 0;
-}
-
-static void rtl83xx_port_bridge_leave(struct dsa_switch *ds, int port,
-					struct net_device *bridge)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u64 port_bitmap = 0, v;
-	int i;
-
-	pr_debug("%s %x: %d", __func__, (u32)priv, port);
-	mutex_lock(&priv->reg_mutex);
-	for (i = 0; i < ds->num_ports; i++) {
-		/* Remove this port from the port matrix of the other ports
-		 * in the same bridge. If the port is disabled, port matrix
-		 * is kept and not being setup until the port becomes enabled.
-		 * And the other port's port matrix cannot be broken when the
-		 * other port is still a VLAN-aware port.
-		 */
-		if (dsa_is_user_port(ds, i) && i != port) {
-			if (dsa_to_port(ds, i)->bridge_dev != bridge)
-				continue;
-			if (priv->ports[i].enable)
-				priv->r->traffic_disable(i, port);
-
-			priv->ports[i].pm &= ~BIT_ULL(port);
-			port_bitmap |= BIT_ULL(i);
-		}
-	}
-
-	/* Remove all other ports from this port matrix. */
-	if (priv->ports[port].enable) {
-		v = priv->r->traffic_get(port);
-		v &= ~port_bitmap;
-		priv->r->traffic_set(port, v);
-	}
-	priv->ports[port].pm &= ~port_bitmap;
-
-	if (priv->r->set_static_move_action)
-		priv->r->set_static_move_action(port, true);
-
-	mutex_unlock(&priv->reg_mutex);
-}
-
-void rtl83xx_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
-{
-	u32 msti = 0;
-	u32 port_state[4];
-	int index, bit;
-	int pos = port;
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int n = priv->port_width << 1;
-
-	/* Ports above or equal CPU port can never be configured */
-	if (port >= priv->cpu_port)
-		return;
-
-	mutex_lock(&priv->reg_mutex);
-
-	/* For the RTL839x and following, the bits are left-aligned, 838x and 930x
-	 * have 64 bit fields, 839x and 931x have 128 bit fields
-	 */
-	if (priv->family_id == RTL8390_FAMILY_ID)
-		pos += 12;
-	if (priv->family_id == RTL9300_FAMILY_ID)
-		pos += 3;
-	if (priv->family_id == RTL9310_FAMILY_ID)
-		pos += 8;
-
-	index = n - (pos >> 4) - 1;
-	bit = (pos << 1) % 32;
-
-	priv->r->stp_get(priv, msti, port_state);
-
-	pr_debug("Current state, port %d: %d\n", port, (port_state[index] >> bit) & 3);
-	port_state[index] &= ~(3 << bit);
-
-	switch (state) {
-	case BR_STATE_DISABLED: /* 0 */
-		port_state[index] |= (0 << bit);
-		break;
-	case BR_STATE_BLOCKING:  /* 4 */
-	case BR_STATE_LISTENING: /* 1 */
-		port_state[index] |= (1 << bit);
-		break;
-	case BR_STATE_LEARNING: /* 2 */
-		port_state[index] |= (2 << bit);
-		break;
-	case BR_STATE_FORWARDING: /* 3*/
-		port_state[index] |= (3 << bit);
-	default:
-		break;
-	}
-
-	priv->r->stp_set(priv, msti, port_state);
-
-	mutex_unlock(&priv->reg_mutex);
-}
-
-void rtl83xx_fast_age(struct dsa_switch *ds, int port)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int s = priv->family_id == RTL8390_FAMILY_ID ? 2 : 0;
-
-	pr_debug("FAST AGE port %d\n", port);
-	mutex_lock(&priv->reg_mutex);
-	/* RTL838X_L2_TBL_FLUSH_CTRL register bits, 839x has 1 bit larger
-	 * port fields:
-	 * 0-4: Replacing port
-	 * 5-9: Flushed/replaced port
-	 * 10-21: FVID
-	 * 22: Entry types: 1: dynamic, 0: also static
-	 * 23: Match flush port
-	 * 24: Match FVID
-	 * 25: Flush (0) or replace (1) L2 entries
-	 * 26: Status of action (1: Start, 0: Done)
-	 */
-	sw_w32(1 << (26 + s) | 1 << (23 + s) | port << (5 + (s / 2)), priv->r->l2_tbl_flush_ctrl);
-
-	do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & BIT(26 + s));
-
-	mutex_unlock(&priv->reg_mutex);
-}
-
-void rtl931x_fast_age(struct dsa_switch *ds, int port)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	pr_info("%s port %d\n", __func__, port);
-	mutex_lock(&priv->reg_mutex);
-	sw_w32(port << 11, RTL931X_L2_TBL_FLUSH_CTRL + 4);
-
-	sw_w32(BIT(24) | BIT(28), RTL931X_L2_TBL_FLUSH_CTRL);
-
-	do { } while (sw_r32(RTL931X_L2_TBL_FLUSH_CTRL) & BIT (28));
-
-	mutex_unlock(&priv->reg_mutex);
-}
-
-void rtl930x_fast_age(struct dsa_switch *ds, int port)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	if (priv->family_id == RTL9310_FAMILY_ID)
-		return rtl931x_fast_age(ds, port);
-
-	pr_debug("FAST AGE port %d\n", port);
-	mutex_lock(&priv->reg_mutex);
-	sw_w32(port << 11, RTL930X_L2_TBL_FLUSH_CTRL + 4);
-
-	sw_w32(BIT(26) | BIT(30), RTL930X_L2_TBL_FLUSH_CTRL);
-
-	do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & BIT(30));
-
-	mutex_unlock(&priv->reg_mutex);
-}
-
-static int rtl83xx_vlan_filtering(struct dsa_switch *ds, int port,
-				  bool vlan_filtering,
-				  struct switchdev_trans *trans)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	pr_debug("%s: port %d\n", __func__, port);
-	mutex_lock(&priv->reg_mutex);
-
-	if (vlan_filtering) {
-		/* Enable ingress and egress filtering
-		 * The VLAN_PORT_IGR_FILTER register uses 2 bits for each port to define
-		 * the filter action:
-		 * 0: Always Forward
-		 * 1: Drop packet
-		 * 2: Trap packet to CPU port
-		 * The Egress filter used 1 bit per state (0: DISABLED, 1: ENABLED)
-		 */
-		if (port != priv->cpu_port)
-			priv->r->set_vlan_igr_filter(port, IGR_DROP);
-
-		priv->r->set_vlan_egr_filter(port, EGR_ENABLE);
-	} else {
-		/* Disable ingress and egress filtering */
-		if (port != priv->cpu_port)
-			priv->r->set_vlan_igr_filter(port, IGR_FORWARD);
-
-		priv->r->set_vlan_egr_filter(port, EGR_DISABLE);
-	}
-
-	/* Do we need to do something to the CPU-Port, too? */
-	mutex_unlock(&priv->reg_mutex);
-
-	return 0;
-}
-
-static int rtl83xx_vlan_prepare(struct dsa_switch *ds, int port,
-				const struct switchdev_obj_port_vlan *vlan)
-{
-	struct rtl838x_vlan_info info;
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	priv->r->vlan_tables_read(0, &info);
-
-	pr_debug("VLAN 0: Tagged ports %llx, untag %llx, profile %d, MC# %d, UC# %d, FID %x\n",
-		info.tagged_ports, info.untagged_ports, info.profile_id,
-		info.hash_mc_fid, info.hash_uc_fid, info.fid);
-
-	priv->r->vlan_tables_read(1, &info);
-	pr_debug("VLAN 1: Tagged ports %llx, untag %llx, profile %d, MC# %d, UC# %d, FID %x\n",
-		info.tagged_ports, info.untagged_ports, info.profile_id,
-		info.hash_mc_fid, info.hash_uc_fid, info.fid);
-	priv->r->vlan_set_untagged(1, info.untagged_ports);
-	pr_debug("SET: Untagged ports, VLAN %d: %llx\n", 1, info.untagged_ports);
-
-	priv->r->vlan_set_tagged(1, &info);
-	pr_debug("SET: Tagged ports, VLAN %d: %llx\n", 1, info.tagged_ports);
-
-	return 0;
-}
-
-static void rtl83xx_vlan_set_pvid(struct rtl838x_switch_priv *priv,
-				  int port, int pvid)
-{
-	/* Set both inner and outer PVID of the port */
-	priv->r->vlan_port_pvid_set(port, PBVLAN_TYPE_INNER, pvid);
-	priv->r->vlan_port_pvid_set(port, PBVLAN_TYPE_OUTER, pvid);
-	priv->r->vlan_port_pvidmode_set(port, PBVLAN_TYPE_INNER,
-					PBVLAN_MODE_UNTAG_AND_PRITAG);
-	priv->r->vlan_port_pvidmode_set(port, PBVLAN_TYPE_OUTER,
-					PBVLAN_MODE_UNTAG_AND_PRITAG);
-
-	priv->ports[port].pvid = pvid;
-}
-
-static void rtl83xx_vlan_add(struct dsa_switch *ds, int port,
-			    const struct switchdev_obj_port_vlan *vlan)
-{
-	struct rtl838x_vlan_info info;
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int v;
-
-	pr_debug("%s port %d, vid_begin %d, vid_end %d, flags %x\n", __func__,
-		port, vlan->vid_begin, vlan->vid_end, vlan->flags);
-
-	if (vlan->vid_begin > 4095 || vlan->vid_end > 4095) {
-		dev_err(priv->dev, "VLAN out of range: %d - %d",
-			vlan->vid_begin, vlan->vid_end);
-		return;
-	}
-
-	mutex_lock(&priv->reg_mutex);
-
-	for (v = vlan->vid_begin; v <= vlan->vid_end; v++) {
-		if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
-			rtl83xx_vlan_set_pvid(priv, port, v);
-		else if (priv->ports[port].pvid == v)
-			rtl83xx_vlan_set_pvid(priv, port, 0);
-	}
-
-	for (v = vlan->vid_begin; v <= vlan->vid_end; v++) {
-		/* Get port memberships of this vlan */
-		priv->r->vlan_tables_read(v, &info);
-
-		/* new VLAN? */
-		if (!info.tagged_ports) {
-			info.fid = 0;
-			info.hash_mc_fid = false;
-			info.hash_uc_fid = false;
-			info.profile_id = 0;
-		}
-
-		/* sanitize untagged_ports - must be a subset */
-		if (info.untagged_ports & ~info.tagged_ports)
-			info.untagged_ports = 0;
-
-		info.tagged_ports |= BIT_ULL(port);
-		if (vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED)
-			info.untagged_ports |= BIT_ULL(port);
-		else
-			info.untagged_ports &= ~BIT_ULL(port);
-
-		priv->r->vlan_set_untagged(v, info.untagged_ports);
-		pr_debug("Untagged ports, VLAN %d: %llx\n", v, info.untagged_ports);
-
-		priv->r->vlan_set_tagged(v, &info);
-		pr_debug("Tagged ports, VLAN %d: %llx\n", v, info.tagged_ports);
-	}
-
-	mutex_unlock(&priv->reg_mutex);
-}
-
-static int rtl83xx_vlan_del(struct dsa_switch *ds, int port,
-			    const struct switchdev_obj_port_vlan *vlan)
-{
-	struct rtl838x_vlan_info info;
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int v;
-	u16 pvid;
-
-	pr_debug("%s: port %d, vid_begin %d, vid_end %d, flags %x\n", __func__,
-		port, vlan->vid_begin, vlan->vid_end, vlan->flags);
-
-	if (vlan->vid_begin > 4095 || vlan->vid_end > 4095) {
-		dev_err(priv->dev, "VLAN out of range: %d - %d",
-			vlan->vid_begin, vlan->vid_end);
-		return -ENOTSUPP;
-	}
-
-	mutex_lock(&priv->reg_mutex);
-	pvid = priv->ports[port].pvid;
-
-	for (v = vlan->vid_begin; v <= vlan->vid_end; v++) {
-		/* Reset to default if removing the current PVID */
-		if (v == pvid) {
-			rtl83xx_vlan_set_pvid(priv, port, 0);
-		}
-		/* Get port memberships of this vlan */
-		priv->r->vlan_tables_read(v, &info);
-
-		/* remove port from both tables */
-		info.untagged_ports &= (~BIT_ULL(port));
-		info.tagged_ports &= (~BIT_ULL(port));
-
-		priv->r->vlan_set_untagged(v, info.untagged_ports);
-		pr_debug("Untagged ports, VLAN %d: %llx\n", v, info.untagged_ports);
-
-		priv->r->vlan_set_tagged(v, &info);
-		pr_debug("Tagged ports, VLAN %d: %llx\n", v, info.tagged_ports);
-	}
-	mutex_unlock(&priv->reg_mutex);
-
-	return 0;
-}
-
-static void rtl83xx_setup_l2_uc_entry(struct rtl838x_l2_entry *e, int port, int vid, u64 mac)
-{
-	memset(e, 0, sizeof(*e));
-
-	e->type = L2_UNICAST;
-	e->valid = true;
-
-	e->age = 3;
-	e->is_static = true;
-
-	e->port = port;
-
-	e->rvid = e->vid = vid;
-	e->is_ip_mc = e->is_ipv6_mc = false;
-	u64_to_ether_addr(mac, e->mac);
-}
-
-static void rtl83xx_setup_l2_mc_entry(struct rtl838x_l2_entry *e, int vid, u64 mac, int mc_group)
-{
-	memset(e, 0, sizeof(*e));
-
-	e->type = L2_MULTICAST;
-	e->valid = true;
-
-	e->mc_portmask_index = mc_group;
-
-	e->rvid = e->vid = vid;
-	e->is_ip_mc = e->is_ipv6_mc = false;
-	u64_to_ether_addr(mac, e->mac);
-}
-
-/*
- * Uses the seed to identify a hash bucket in the L2 using the derived hash key and then loops
- * over the entries in the bucket until either a matching entry is found or an empty slot
- * Returns the filled in rtl838x_l2_entry and the index in the bucket when an entry was found
- * when an empty slot was found and must exist is false, the index of the slot is returned
- * when no slots are available returns -1
- */
-static int rtl83xx_find_l2_hash_entry(struct rtl838x_switch_priv *priv, u64 seed,
-				     bool must_exist, struct rtl838x_l2_entry *e)
-{
-	int i, idx = -1;
-	u32 key = priv->r->l2_hash_key(priv, seed);
-	u64 entry;
-
-	pr_debug("%s: using key %x, for seed %016llx\n", __func__, key, seed);
-	// Loop over all entries in the hash-bucket and over the second block on 93xx SoCs
-	for (i = 0; i < priv->l2_bucket_size; i++) {
-		entry = priv->r->read_l2_entry_using_hash(key, i, e);
-		pr_debug("valid %d, mac %016llx\n", e->valid, ether_addr_to_u64(&e->mac[0]));
-		if (must_exist && !e->valid)
-			continue;
-		if (!e->valid || ((entry & 0x0fffffffffffffffULL) == seed)) {
-			idx = i > 3 ? ((key >> 14) & 0xffff) | i >> 1 : ((key << 2) | i) & 0xffff;
-			break;
-		}
-	}
-
-	return idx;
-}
-
-/*
- * Uses the seed to identify an entry in the CAM by looping over all its entries
- * Returns the filled in rtl838x_l2_entry and the index in the CAM when an entry was found
- * when an empty slot was found the index of the slot is returned
- * when no slots are available returns -1
- */
-static int rtl83xx_find_l2_cam_entry(struct rtl838x_switch_priv *priv, u64 seed,
-				     bool must_exist, struct rtl838x_l2_entry *e)
-{
-	int i, idx = -1;
-	u64 entry;
-
-	for (i = 0; i < 64; i++) {
-		entry = priv->r->read_cam(i, e);
-		if (!must_exist && !e->valid) {
-			if (idx < 0) /* First empty entry? */
-				idx = i;
-			break;
-		} else if ((entry & 0x0fffffffffffffffULL) == seed) {
-			pr_debug("Found entry in CAM\n");
-			idx = i;
-			break;
-		}
-	}
-	return idx;
-}
-
-static int rtl83xx_port_fdb_add(struct dsa_switch *ds, int port,
-				const unsigned char *addr, u16 vid)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u64 mac = ether_addr_to_u64(addr);
-	struct rtl838x_l2_entry e;
-	int err = 0, idx;
-	u64 seed = priv->r->l2_hash_seed(mac, vid);
-
-	if (priv->is_lagmember[port]) {
-		pr_debug("%s: %d is lag slave. ignore\n", __func__, port);
-		return 0;
-	}
-
-	mutex_lock(&priv->reg_mutex);
-
-	idx = rtl83xx_find_l2_hash_entry(priv, seed, false, &e);
-
-	// Found an existing or empty entry
-	if (idx >= 0) {
-		rtl83xx_setup_l2_uc_entry(&e, port, vid, mac);
-		priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e);
-		goto out;
-	}
-
-	// Hash buckets full, try CAM
-	idx = rtl83xx_find_l2_cam_entry(priv, seed, false, &e);
-
-	if (idx >= 0) {
-		rtl83xx_setup_l2_uc_entry(&e, port, vid, mac);
-		priv->r->write_cam(idx, &e);
-		goto out;
-	}
-
-	err = -ENOTSUPP;
-out:
-	mutex_unlock(&priv->reg_mutex);
-	return err;
-}
-
-static int rtl83xx_port_fdb_del(struct dsa_switch *ds, int port,
-			   const unsigned char *addr, u16 vid)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u64 mac = ether_addr_to_u64(addr);
-	struct rtl838x_l2_entry e;
-	int err = 0, idx;
-	u64 seed = priv->r->l2_hash_seed(mac, vid);
-
-	pr_debug("In %s, mac %llx, vid: %d\n", __func__, mac, vid);
-	mutex_lock(&priv->reg_mutex);
-
-	idx = rtl83xx_find_l2_hash_entry(priv, seed, true, &e);
-
-	if (idx >= 0) {
-		pr_debug("Found entry index %d, key %d and bucket %d\n", idx, idx >> 2, idx & 3);
-		e.valid = false;
-		priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e);
-		goto out;
-	}
-
-	/* Check CAM for spillover from hash buckets */
-	idx = rtl83xx_find_l2_cam_entry(priv, seed, true, &e);
-
-	if (idx >= 0) {
-		e.valid = false;
-		priv->r->write_cam(idx, &e);
-		goto out;
-	}
-	err = -ENOENT;
-out:
-	mutex_unlock(&priv->reg_mutex);
-	return err;
-}
-
-static int rtl83xx_port_fdb_dump(struct dsa_switch *ds, int port,
-				 dsa_fdb_dump_cb_t *cb, void *data)
-{
-	struct rtl838x_l2_entry e;
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int i;
-
-	mutex_lock(&priv->reg_mutex);
-
-	for (i = 0; i < priv->fib_entries; i++) {
-		priv->r->read_l2_entry_using_hash(i >> 2, i & 0x3, &e);
-
-		if (!e.valid)
-			continue;
-
-		if (e.port == port || e.port == RTL930X_PORT_IGNORE)
-			cb(e.mac, e.vid, e.is_static, data);
-
-		if (!((i + 1) % 64))
-			cond_resched();
-	}
-
-	for (i = 0; i < 64; i++) {
-		priv->r->read_cam(i, &e);
-
-		if (!e.valid)
-			continue;
-
-		if (e.port == port)
-			cb(e.mac, e.vid, e.is_static, data);
-	}
-
-	mutex_unlock(&priv->reg_mutex);
-	return 0;
-}
-
-static int rtl83xx_port_mdb_prepare(struct dsa_switch *ds, int port,
-					const struct switchdev_obj_port_mdb *mdb)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	if (priv->id >= 0x9300)
-		return -EOPNOTSUPP;
-
-	return 0;
-}
-
-static void rtl83xx_port_mdb_add(struct dsa_switch *ds, int port,
-			const struct switchdev_obj_port_mdb *mdb)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u64 mac = ether_addr_to_u64(mdb->addr);
-	struct rtl838x_l2_entry e;
-	int err = 0, idx;
-	int vid = mdb->vid;
-	u64 seed = priv->r->l2_hash_seed(mac, vid);
-	int mc_group;
-
-	pr_debug("In %s port %d, mac %llx, vid: %d\n", __func__, port, mac, vid);
-
-	if (priv->is_lagmember[port]) {
-		pr_debug("%s: %d is lag slave. ignore\n", __func__, port);
-		return;
-	}
-
-	mutex_lock(&priv->reg_mutex);
-
-	idx = rtl83xx_find_l2_hash_entry(priv, seed, false, &e);
-
-	// Found an existing or empty entry
-	if (idx >= 0) {
-		if (e.valid) {
-			pr_debug("Found an existing entry %016llx, mc_group %d\n",
-				ether_addr_to_u64(e.mac), e.mc_portmask_index);
-			rtl83xx_mc_group_add_port(priv, e.mc_portmask_index, port);
-		} else {
-			pr_debug("New entry for seed %016llx\n", seed);
-			mc_group = rtl83xx_mc_group_alloc(priv, port);
-			if (mc_group < 0) {
-				err = -ENOTSUPP;
-				goto out;
-			}
-			rtl83xx_setup_l2_mc_entry(&e, vid, mac, mc_group);
-			priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e);
-		}
-		goto out;
-	}
-
-	// Hash buckets full, try CAM
-	idx = rtl83xx_find_l2_cam_entry(priv, seed, false, &e);
-
-	if (idx >= 0) {
-		if (e.valid) {
-			pr_debug("Found existing CAM entry %016llx, mc_group %d\n",
-				 ether_addr_to_u64(e.mac), e.mc_portmask_index);
-			rtl83xx_mc_group_add_port(priv, e.mc_portmask_index, port);
-		} else {
-			pr_debug("New entry\n");
-			mc_group = rtl83xx_mc_group_alloc(priv, port);
-			if (mc_group < 0) {
-				err = -ENOTSUPP;
-				goto out;
-			}
-			rtl83xx_setup_l2_mc_entry(&e, vid, mac, mc_group);
-			priv->r->write_cam(idx, &e);
-		}
-		goto out;
-	}
-
-	err = -ENOTSUPP;
-out:
-	mutex_unlock(&priv->reg_mutex);
-	if (err)
-		dev_err(ds->dev, "failed to add MDB entry\n");
-}
-
-int rtl83xx_port_mdb_del(struct dsa_switch *ds, int port,
-			const struct switchdev_obj_port_mdb *mdb)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	u64 mac = ether_addr_to_u64(mdb->addr);
-	struct rtl838x_l2_entry e;
-	int err = 0, idx;
-	int vid = mdb->vid;
-	u64 seed = priv->r->l2_hash_seed(mac, vid);
-	u64 portmask;
-
-	pr_debug("In %s, port %d, mac %llx, vid: %d\n", __func__, port, mac, vid);
-
-	if (priv->is_lagmember[port]) {
-		pr_info("%s: %d is lag slave. ignore\n", __func__, port);
-		return 0;
-	}
-
-	mutex_lock(&priv->reg_mutex);
-
-	idx = rtl83xx_find_l2_hash_entry(priv, seed, true, &e);
-
-	if (idx >= 0) {
-		pr_debug("Found entry index %d, key %d and bucket %d\n", idx, idx >> 2, idx & 3);
-		portmask = rtl83xx_mc_group_del_port(priv, e.mc_portmask_index, port);
-		if (!portmask) {
-			e.valid = false;
-			priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e);
-		}
-		goto out;
-	}
-
-	/* Check CAM for spillover from hash buckets */
-	idx = rtl83xx_find_l2_cam_entry(priv, seed, true, &e);
-
-	if (idx >= 0) {
-		portmask = rtl83xx_mc_group_del_port(priv, e.mc_portmask_index, port);
-		if (!portmask) {
-			e.valid = false;
-			priv->r->write_cam(idx, &e);
-		}
-		goto out;
-	}
-	// TODO: Re-enable with a newer kernel: err = -ENOENT;
-out:
-	mutex_unlock(&priv->reg_mutex);
-	return err;
-}
-
-static int rtl83xx_port_mirror_add(struct dsa_switch *ds, int port,
-				   struct dsa_mall_mirror_tc_entry *mirror,
-				   bool ingress)
-{
-	/* We support 4 mirror groups, one destination port per group */
-	int group;
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int ctrl_reg, dpm_reg, spm_reg;	
-
-	pr_debug("In %s\n", __func__);
-
-	for (group = 0; group < 4; group++) {
-		if (priv->mirror_group_ports[group] == mirror->to_local_port)
-			break;
-	}
-	if (group >= 4) {
-		for (group = 0; group < 4; group++) {
-			if (priv->mirror_group_ports[group] < 0)
-				break;
-		}
-	}
-
-	if (group >= 4)
-		return -ENOSPC;
-
-	ctrl_reg = priv->r->mir_ctrl + group * 4;
-	dpm_reg = priv->r->mir_dpm + group * 4 * priv->port_width;
-	spm_reg = priv->r->mir_spm + group * 4 * priv->port_width;
-
-	pr_debug("Using group %d\n", group);
-	mutex_lock(&priv->reg_mutex);
-
-	if (priv->family_id == RTL8380_FAMILY_ID) {
-		/* Enable mirroring to port across VLANs (bit 11) */
-		sw_w32(1 << 11 | (mirror->to_local_port << 4) | 1, ctrl_reg);
-	} else {
-		/* Enable mirroring to destination port */
-		sw_w32((mirror->to_local_port << 4) | 1, ctrl_reg);
-	}
-
-	if (ingress && (priv->r->get_port_reg_be(spm_reg) & (1ULL << port))) {
-		mutex_unlock(&priv->reg_mutex);
-		return -EEXIST;
-	}
-	if ((!ingress) && (priv->r->get_port_reg_be(dpm_reg) & (1ULL << port))) {
-		mutex_unlock(&priv->reg_mutex);
-		return -EEXIST;
-	}
-
-	if (ingress)
-		priv->r->mask_port_reg_be(0, 1ULL << port, spm_reg);
-	else
-		priv->r->mask_port_reg_be(0, 1ULL << port, dpm_reg);
-
-	priv->mirror_group_ports[group] = mirror->to_local_port;
-	mutex_unlock(&priv->reg_mutex);
-	return 0;
-}
-
-static void rtl83xx_port_mirror_del(struct dsa_switch *ds, int port,
-				    struct dsa_mall_mirror_tc_entry *mirror)
-{
-	int group = 0;
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int ctrl_reg, dpm_reg, spm_reg;
-
-	pr_debug("In %s\n", __func__);
-	for (group = 0; group < 4; group++) {
-		if (priv->mirror_group_ports[group] == mirror->to_local_port)
-			break;
-	}
-	if (group >= 4)
-		return;
-
-	ctrl_reg = priv->r->mir_ctrl + group * 4;
-	dpm_reg = priv->r->mir_dpm + group * 4 * priv->port_width;
-	spm_reg = priv->r->mir_spm + group * 4 * priv->port_width;
-
-	mutex_lock(&priv->reg_mutex);
-	if (mirror->ingress) {
-		/* Ingress, clear source port matrix */
-		priv->r->mask_port_reg_be(1ULL << port, 0, spm_reg);
-	} else {
-		/* Egress, clear destination port matrix */
-		priv->r->mask_port_reg_be(1ULL << port, 0, dpm_reg);
-	}
-
-	if (!(sw_r32(spm_reg) || sw_r32(dpm_reg))) {
-		priv->mirror_group_ports[group] = -1;
-		sw_w32(0, ctrl_reg);
-	}
-
-	mutex_unlock(&priv->reg_mutex);
-}
-
-static int rtl83xx_port_pre_bridge_flags(struct dsa_switch *ds, int port, unsigned long flags, struct netlink_ext_ack *extack)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	unsigned long features = 0;
-	pr_debug("%s: %d %lX\n", __func__, port, flags);
-	if (priv->r->enable_learning)
-		features |= BR_LEARNING;
-	if (priv->r->enable_flood)
-		features |= BR_FLOOD;
-	if (priv->r->enable_mcast_flood)
-		features |= BR_MCAST_FLOOD;
-	if (priv->r->enable_bcast_flood)
-		features |= BR_BCAST_FLOOD;
-	if (flags & ~(features))
-		return -EINVAL;
-
-	return 0;
-}
-
-static int rtl83xx_port_bridge_flags(struct dsa_switch *ds, int port, unsigned long flags, struct netlink_ext_ack *extack)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	pr_debug("%s: %d %lX\n", __func__, port, flags);
-	if (priv->r->enable_learning)
-		priv->r->enable_learning(port, !!(flags & BR_LEARNING));
-
-	if (priv->r->enable_flood)
-		priv->r->enable_flood(port, !!(flags & BR_FLOOD));
-
-	if (priv->r->enable_mcast_flood)
-		priv->r->enable_mcast_flood(port, !!(flags & BR_MCAST_FLOOD));
-
-	if (priv->r->enable_bcast_flood)
-		priv->r->enable_bcast_flood(port, !!(flags & BR_BCAST_FLOOD));
-
-	return 0;
-}
-
-static bool rtl83xx_lag_can_offload(struct dsa_switch *ds,
-				      struct net_device *lag,
-				      struct netdev_lag_upper_info *info)
-{
-	int id;
-
-	id = dsa_lag_id(ds->dst, lag);
-	if (id < 0 || id >= ds->num_lag_ids)
-		return false;
-
-	if (info->tx_type != NETDEV_LAG_TX_TYPE_HASH) {
-		return false;
-	}
-	if (info->hash_type != NETDEV_LAG_HASH_L2 && info->hash_type != NETDEV_LAG_HASH_L23)
-		return false;
-
-	return true;
-}
-
-static int rtl83xx_port_lag_change(struct dsa_switch *ds, int port)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	pr_debug("%s: %d\n", __func__, port);
-	// Nothing to be done...
-
-	return 0;
-}
-
-static int rtl83xx_port_lag_join(struct dsa_switch *ds, int port,
-				   struct net_device *lag,
-				   struct netdev_lag_upper_info *info)
-{
-	struct rtl838x_switch_priv *priv = ds->priv;
-	int i, err = 0;
-
-	if (!rtl83xx_lag_can_offload(ds, lag, info))
-		return -EOPNOTSUPP;
-
-	mutex_lock(&priv->reg_mutex);
-
-	for (i = 0; i < priv->n_lags; i++) {
-		if ((!priv->lag_devs[i]) || (priv->lag_devs[i] == lag))
-			break;
-	}
-	if (port >= priv->cpu_port) {
-		err = -EINVAL;
-		goto out;
-	}
-	pr_info("port_lag_join: group %d, port %d\n",i, port);
-	if (!priv->lag_devs[i])
-		priv->lag_devs[i] = lag;
-
-	if (priv->lag_primary[i]==-1) {
-		priv->lag_primary[i]=port;
-	} else
-		priv->is_lagmember[port] = 1;
-
-	priv->lagmembers |= (1ULL << port);
-
-	pr_debug("lag_members = %llX\n", priv->lagmembers);
-	err = rtl83xx_lag_add(priv->ds, i, port, info);
-	if (err) {
-		err = -EINVAL;
-		goto out;
-	}
-
-out:
-	mutex_unlock(&priv->reg_mutex);
-	return err;
-
-}
-
-static int rtl83xx_port_lag_leave(struct dsa_switch *ds, int port,
-				    struct net_device *lag)
-{
-	int i, group = -1, err;
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	mutex_lock(&priv->reg_mutex);
-	for (i=0;i<priv->n_lags;i++) {
-		if (priv->lags_port_members[i] & BIT_ULL(port)) {
-			group = i;
-			break;
-		}
-	}
-
-	if (group == -1) {
-		pr_info("port_lag_leave: port %d is not a member\n", port);
-		err = -EINVAL;
-		goto out;
-	}
-
-	if (port >= priv->cpu_port) {
-		err = -EINVAL;
-		goto out;
-	}
-	pr_info("port_lag_del: group %d, port %d\n",group, port);
-	priv->lagmembers &=~ (1ULL << port);
-	priv->lag_primary[i] = -1;
-	priv->is_lagmember[port] = 0;
-	pr_debug("lag_members = %llX\n", priv->lagmembers);
-	err = rtl83xx_lag_del(priv->ds, group, port);
-	if (err) {
-		err = -EINVAL;
-		goto out;
-	}
-	if (!priv->lags_port_members[i])
-		priv->lag_devs[i] = NULL;
-
-out:
-	mutex_unlock(&priv->reg_mutex);
-	return 0;
-}
-
-int dsa_phy_read(struct dsa_switch *ds, int phy_addr, int phy_reg)
-{
-	u32 val;
-	u32 offset = 0;
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	if (phy_addr >= 24 && phy_addr <= 27
-		&& priv->ports[24].phy == PHY_RTL838X_SDS) {
-		if (phy_addr == 26)
-			offset = 0x100;
-		val = sw_r32(RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2)) & 0xffff;
-		return val;
-	}
-
-	read_phy(phy_addr, 0, phy_reg, &val);
-	return val;
-}
-
-int dsa_phy_write(struct dsa_switch *ds, int phy_addr, int phy_reg, u16 val)
-{
-	u32 offset = 0;
-	struct rtl838x_switch_priv *priv = ds->priv;
-
-	if (phy_addr >= 24 && phy_addr <= 27
-	     && priv->ports[24].phy == PHY_RTL838X_SDS) {
-		if (phy_addr == 26)
-			offset = 0x100;
-		sw_w32(val, RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2));
-		return 0;
-	}
-	return write_phy(phy_addr, 0, phy_reg, val);
-}
-
-const struct dsa_switch_ops rtl83xx_switch_ops = {
-	.get_tag_protocol	= rtl83xx_get_tag_protocol,
-	.setup			= rtl83xx_setup,
-
-	.phy_read		= dsa_phy_read,
-	.phy_write		= dsa_phy_write,
-
-	.phylink_validate	= rtl83xx_phylink_validate,
-	.phylink_mac_link_state	= rtl83xx_phylink_mac_link_state,
-	.phylink_mac_config	= rtl83xx_phylink_mac_config,
-	.phylink_mac_link_down	= rtl83xx_phylink_mac_link_down,
-	.phylink_mac_link_up	= rtl83xx_phylink_mac_link_up,
-
-	.get_strings		= rtl83xx_get_strings,
-	.get_ethtool_stats	= rtl83xx_get_ethtool_stats,
-	.get_sset_count		= rtl83xx_get_sset_count,
-
-	.port_enable		= rtl83xx_port_enable,
-	.port_disable		= rtl83xx_port_disable,
-
-	.get_mac_eee		= rtl83xx_get_mac_eee,
-	.set_mac_eee		= rtl83xx_set_mac_eee,
-
-	.set_ageing_time	= rtl83xx_set_ageing_time,
-	.port_bridge_join	= rtl83xx_port_bridge_join,
-	.port_bridge_leave	= rtl83xx_port_bridge_leave,
-	.port_stp_state_set	= rtl83xx_port_stp_state_set,
-	.port_fast_age		= rtl83xx_fast_age,
-
-	.port_vlan_filtering	= rtl83xx_vlan_filtering,
-	.port_vlan_prepare	= rtl83xx_vlan_prepare,
-	.port_vlan_add		= rtl83xx_vlan_add,
-	.port_vlan_del		= rtl83xx_vlan_del,
-
-	.port_fdb_add		= rtl83xx_port_fdb_add,
-	.port_fdb_del		= rtl83xx_port_fdb_del,
-	.port_fdb_dump		= rtl83xx_port_fdb_dump,
-
-	.port_mdb_prepare	= rtl83xx_port_mdb_prepare,
-	.port_mdb_add		= rtl83xx_port_mdb_add,
-	.port_mdb_del		= rtl83xx_port_mdb_del,
-
-	.port_mirror_add	= rtl83xx_port_mirror_add,
-	.port_mirror_del	= rtl83xx_port_mirror_del,
-
-	.port_lag_change	= rtl83xx_port_lag_change,
-	.port_lag_join		= rtl83xx_port_lag_join,
-	.port_lag_leave		= rtl83xx_port_lag_leave,
-
-	.port_pre_bridge_flags	= rtl83xx_port_pre_bridge_flags,
-	.port_bridge_flags	= rtl83xx_port_bridge_flags,
-};
-
-const struct dsa_switch_ops rtl930x_switch_ops = {
-	.get_tag_protocol	= rtl83xx_get_tag_protocol,
-	.setup			= rtl93xx_setup,
-
-	.phy_read		= dsa_phy_read,
-	.phy_write		= dsa_phy_write,
-
-	.phylink_validate	= rtl93xx_phylink_validate,
-	.phylink_mac_link_state	= rtl93xx_phylink_mac_link_state,
-	.phylink_mac_config	= rtl93xx_phylink_mac_config,
-	.phylink_mac_link_down	= rtl93xx_phylink_mac_link_down,
-	.phylink_mac_link_up	= rtl93xx_phylink_mac_link_up,
-
-	.get_strings		= rtl83xx_get_strings,
-	.get_ethtool_stats	= rtl83xx_get_ethtool_stats,
-	.get_sset_count		= rtl83xx_get_sset_count,
-
-	.port_enable		= rtl83xx_port_enable,
-	.port_disable		= rtl83xx_port_disable,
-
-	.get_mac_eee		= rtl93xx_get_mac_eee,
-	.set_mac_eee		= rtl83xx_set_mac_eee,
-
-	.set_ageing_time	= rtl83xx_set_ageing_time,
-	.port_bridge_join	= rtl83xx_port_bridge_join,
-	.port_bridge_leave	= rtl83xx_port_bridge_leave,
-	.port_stp_state_set	= rtl83xx_port_stp_state_set,
-	.port_fast_age		= rtl930x_fast_age,
-
-	.port_vlan_filtering	= rtl83xx_vlan_filtering,
-	.port_vlan_prepare	= rtl83xx_vlan_prepare,
-	.port_vlan_add		= rtl83xx_vlan_add,
-	.port_vlan_del		= rtl83xx_vlan_del,
-
-	.port_fdb_add		= rtl83xx_port_fdb_add,
-	.port_fdb_del		= rtl83xx_port_fdb_del,
-	.port_fdb_dump		= rtl83xx_port_fdb_dump,
-
-	.port_mdb_prepare	= rtl83xx_port_mdb_prepare,
-	.port_mdb_add		= rtl83xx_port_mdb_add,
-	.port_mdb_del		= rtl83xx_port_mdb_del,
-
-	.port_lag_change	= rtl83xx_port_lag_change,
-	.port_lag_join		= rtl83xx_port_lag_join,
-	.port_lag_leave		= rtl83xx_port_lag_leave,
-
-	.port_pre_bridge_flags	= rtl83xx_port_pre_bridge_flags,
-	.port_bridge_flags	= rtl83xx_port_bridge_flags,
-};
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/qos.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/qos.c
deleted file mode 100644
index 2fc8d37f3e42..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/qos.c
+++ /dev/null
@@ -1,576 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <net/dsa.h>
-#include <linux/delay.h>
-
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-#include "rtl83xx.h"
-
-static struct rtl838x_switch_priv *switch_priv;
-extern struct rtl83xx_soc_info soc_info;
-
-enum scheduler_type {
-	WEIGHTED_FAIR_QUEUE = 0,
-	WEIGHTED_ROUND_ROBIN,
-};
-
-int max_available_queue[] = {0, 1, 2, 3, 4, 5, 6, 7};
-int default_queue_weights[] = {1, 1, 1, 1, 1, 1, 1, 1};
-int dot1p_priority_remapping[] = {0, 1, 2, 3, 4, 5, 6, 7};
-
-static void rtl839x_read_scheduling_table(int port)
-{
-	u32 cmd = 1 << 9 /* Execute cmd */
-		| 0 << 8 /* Read */
-		| 0 << 6 /* Table type 0b00 */
-		| (port & 0x3f);
-	rtl839x_exec_tbl2_cmd(cmd);
-}
-
-static void rtl839x_write_scheduling_table(int port)
-{
-	u32 cmd = 1 << 9 /* Execute cmd */
-		| 1 << 8 /* Write */
-		| 0 << 6 /* Table type 0b00 */
-		| (port & 0x3f);
-	rtl839x_exec_tbl2_cmd(cmd);
-}
-
-static void rtl839x_read_out_q_table(int port)
-{
-	u32 cmd = 1 << 9 /* Execute cmd */
-		| 0 << 8 /* Read */
-		| 2 << 6 /* Table type 0b10 */
-		| (port & 0x3f);
-	rtl839x_exec_tbl2_cmd(cmd);
-}
-
-static void rtl838x_storm_enable(struct rtl838x_switch_priv *priv, int port, bool enable)
-{
-	// Enable Storm control for that port for UC, MC, and BC
-	if (enable)
-		sw_w32(0x7, RTL838X_STORM_CTRL_LB_CTRL(port));
-	else
-		sw_w32(0x0, RTL838X_STORM_CTRL_LB_CTRL(port));
-}
-
-u32 rtl838x_get_egress_rate(struct rtl838x_switch_priv *priv, int port)
-{
-	u32 rate;
-
-	if (port > priv->cpu_port)
-		return 0;
-	rate = sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port)) & 0x3fff;
-	return rate;
-}
-
-/* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */
-int rtl838x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate)
-{
-	u32 old_rate;
-
-	if (port > priv->cpu_port)
-		return -1;
-
-	old_rate = sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port));
-	sw_w32(rate, RTL838X_SCHED_P_EGR_RATE_CTRL(port));
-
-	return old_rate;
-}
-
-/* Set the rate limit for a particular queue in Bits/s
- * units of the rate is 16Kbps
- */
-void rtl838x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port,
-					    int queue, u32 rate)
-{
-	if (port > priv->cpu_port)
-		return;
-	if (queue > 7)
-		return;
-	sw_w32(rate, RTL838X_SCHED_Q_EGR_RATE_CTRL(port, queue));
-}
-
-static void rtl838x_rate_control_init(struct rtl838x_switch_priv *priv)
-{
-	int i;
-
-	pr_info("Enabling Storm control\n");
-	// TICK_PERIOD_PPS
-	if (priv->id == 0x8380)
-		sw_w32_mask(0x3ff << 20, 434 << 20, RTL838X_SCHED_LB_TICK_TKN_CTRL_0);
-
-	// Set burst rate
-	sw_w32(0x00008000, RTL838X_STORM_CTRL_BURST_0); // UC
-	sw_w32(0x80008000, RTL838X_STORM_CTRL_BURST_1); // MC and BC
-
-	// Set burst Packets per Second to 32
-	sw_w32(0x00000020, RTL838X_STORM_CTRL_BURST_PPS_0); // UC
-	sw_w32(0x00200020, RTL838X_STORM_CTRL_BURST_PPS_1); // MC and BC
-
-	// Include IFG in storm control, rate based on bytes/s (0 = packets)
-	sw_w32_mask(0, 1 << 6 | 1 << 5, RTL838X_STORM_CTRL);
-	// Bandwidth control includes preamble and IFG (10 Bytes)
-	sw_w32_mask(0, 1, RTL838X_SCHED_CTRL);
-
-	// On SoCs except RTL8382M, set burst size of port egress
-	if (priv->id != 0x8382)
-		sw_w32_mask(0xffff, 0x800, RTL838X_SCHED_LB_THR);
-
-	/* Enable storm control on all ports with a PHY and limit rates,
-	 * for UC and MC for both known and unknown addresses */
-	for (i = 0; i < priv->cpu_port; i++) {
-		if (priv->ports[i].phy) {
-			sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_UC(i));
-			sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_MC(i));
-			sw_w32(0x8000, RTL838X_STORM_CTRL_PORT_BC(i));
-			rtl838x_storm_enable(priv, i, true);
-		}
-	}
-
-	// Attack prevention, enable all attack prevention measures
-	//sw_w32(0x1ffff, RTL838X_ATK_PRVNT_CTRL);
-	/* Attack prevention, drop (bit = 0) problematic packets on all ports.
-	 * Setting bit = 1 means: trap to CPU
-	 */
-	//sw_w32(0, RTL838X_ATK_PRVNT_ACT);
-	// Enable attack prevention on all ports
-	//sw_w32(0x0fffffff, RTL838X_ATK_PRVNT_PORT_EN);
-}
-
-/* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */
-u32 rtl839x_get_egress_rate(struct rtl838x_switch_priv *priv, int port)
-{
-	u32 rate;
-
-	pr_debug("%s: Getting egress rate on port %d to %d\n", __func__, port, rate);
-	if (port >= priv->cpu_port)
-		return 0;
-
-	mutex_lock(&priv->reg_mutex);
-
-	rtl839x_read_scheduling_table(port);
-
-	rate = sw_r32(RTL839X_TBL_ACCESS_DATA_2(7));
-	rate <<= 12;
-	rate |= sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)) >> 20;
-
-	mutex_unlock(&priv->reg_mutex);
-
-	return rate;
-}
-
-/* Sets the rate limit, 10MBit/s is equal to a rate value of 625, returns previous rate */
-int rtl839x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate)
-{
-	u32 old_rate;
-
-	pr_debug("%s: Setting egress rate on port %d to %d\n", __func__, port, rate);
-	if (port >= priv->cpu_port)
-		return -1;
-
-	mutex_lock(&priv->reg_mutex);
-
-	rtl839x_read_scheduling_table(port);
-
-	old_rate = sw_r32(RTL839X_TBL_ACCESS_DATA_2(7)) & 0xff;
-	old_rate <<= 12;
-	old_rate |= sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)) >> 20;
-	sw_w32_mask(0xff, (rate >> 12) & 0xff, RTL839X_TBL_ACCESS_DATA_2(7));
-	sw_w32_mask(0xfff << 20, rate << 20, RTL839X_TBL_ACCESS_DATA_2(8));
-
-	rtl839x_write_scheduling_table(port);
-	
-	mutex_unlock(&priv->reg_mutex);
-
-	return old_rate;
-}
-
-/* Set the rate limit for a particular queue in Bits/s
- * units of the rate is 16Kbps
- */
-void rtl839x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port,
-					int queue, u32 rate)
-{
-	int lsb = 128 + queue * 20;
-	int low_byte = 8 - (lsb >> 5);
-	int start_bit = lsb - (low_byte << 5);
-	u32 high_mask = 0xfffff	>> (32 - start_bit);
-
-	pr_debug("%s: Setting egress rate on port %d, queue %d to %d\n",
-		__func__, port, queue, rate);
-	if (port >= priv->cpu_port)
-		return;
-	if (queue > 7)
-		return;
-
-	mutex_lock(&priv->reg_mutex);
-
-	rtl839x_read_scheduling_table(port);
-
-	sw_w32_mask(0xfffff << start_bit, (rate & 0xfffff) << start_bit,
-		    RTL839X_TBL_ACCESS_DATA_2(low_byte));
-	if (high_mask)
-		sw_w32_mask(high_mask, (rate & 0xfffff) >> (32- start_bit),
-			    RTL839X_TBL_ACCESS_DATA_2(low_byte - 1));
-
-	rtl839x_write_scheduling_table(port);
-
-	mutex_unlock(&priv->reg_mutex);
-}
-
-static void rtl839x_rate_control_init(struct rtl838x_switch_priv *priv)
-{
-	int p, q;
-
-	pr_info("%s: enabling rate control\n", __func__);
-	/* Tick length and token size settings for SoC with 250MHz,
-	 * RTL8350 family would use 50MHz
-	 */
-	// Set the special tick period
-	sw_w32(976563, RTL839X_STORM_CTRL_SPCL_LB_TICK_TKN_CTRL);
-	// Ingress tick period and token length 10G
-	sw_w32(18 << 11 | 151, RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_0);
-	// Ingress tick period and token length 1G
-	sw_w32(245 << 11 | 129, RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_1);
-	// Egress tick period 10G, bytes/token 10G and tick period 1G, bytes/token 1G
-	sw_w32(18 << 24 | 151 << 16 | 185 << 8 | 97, RTL839X_SCHED_LB_TICK_TKN_CTRL);
-	// Set the tick period of the CPU and the Token Len
-	sw_w32(3815 << 8 | 1, RTL839X_SCHED_LB_TICK_TKN_PPS_CTRL);
-
-	// Set the Weighted Fair Queueing burst size
-	sw_w32_mask(0xffff, 4500, RTL839X_SCHED_LB_THR);
-
-	// Storm-rate calculation is based on bytes/sec (bit 5), include IFG (bit 6)
-	sw_w32_mask(0, 1 << 5 | 1 << 6, RTL839X_STORM_CTRL);
-
-	/* Based on the rate control mode being bytes/s
-	 * set tick period and token length for 10G
-	 */
-	sw_w32(18 << 10 | 151, RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_0);
-	/* and for 1G ports */
-	sw_w32(246 << 10 | 129, RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_1);
-
-	/* Set default burst rates on all ports (the same for 1G / 10G) with a PHY
-	 * for UC, MC and BC
-	 * For 1G port, the minimum burst rate is 1700, maximum 65535,
-	 * For 10G ports it is 2650 and 1048575 respectively */
-	for (p = 0; p < priv->cpu_port; p++) {
-		if (priv->ports[p].phy && !priv->ports[p].is10G) {
-			sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_UC_1(p));
-			sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_MC_1(p));
-			sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_BC_1(p));
-		}
-	}
-
-	/* Setup ingress/egress per-port rate control */
-	for (p = 0; p < priv->cpu_port; p++) {
-		if (!priv->ports[p].phy)
-			continue;
-
-		if (priv->ports[p].is10G)
-			rtl839x_set_egress_rate(priv, p, 625000); // 10GB/s
-		else
-			rtl839x_set_egress_rate(priv, p, 62500);  // 1GB/s
-
-		// Setup queues: all RTL83XX SoCs have 8 queues, maximum rate
-		for (q = 0; q < 8; q++)
-			rtl839x_egress_rate_queue_limit(priv, p, q, 0xfffff);
-
-		if (priv->ports[p].is10G) {
-			// Set high threshold to maximum
-			sw_w32_mask(0xffff, 0xffff, RTL839X_IGR_BWCTRL_PORT_CTRL_10G_0(p));
-		} else {
-			// Set high threshold to maximum
-			sw_w32_mask(0xffff, 0xffff, RTL839X_IGR_BWCTRL_PORT_CTRL_1(p));
-		}
-	}
-
-	// Set global ingress low watermark rate
-	sw_w32(65532, RTL839X_IGR_BWCTRL_CTRL_LB_THR);
-}
-
-
-
-void rtl838x_setup_prio2queue_matrix(int *min_queues)
-{
-	int i;
-	u32 v;
-
-	pr_info("Current Intprio2queue setting: %08x\n", sw_r32(RTL838X_QM_INTPRI2QID_CTRL));
-	for (i = 0; i < MAX_PRIOS; i++)
-		v |= i << (min_queues[i] * 3);
-	sw_w32(v, RTL838X_QM_INTPRI2QID_CTRL);
-}
-
-void rtl839x_setup_prio2queue_matrix(int *min_queues)
-{
-	int i, q;
-
-	pr_info("Current Intprio2queue setting: %08x\n", sw_r32(RTL839X_QM_INTPRI2QID_CTRL(0)));
-	for (i = 0; i < MAX_PRIOS; i++) {
-		q = min_queues[i];
-		sw_w32(i << (q * 3), RTL839X_QM_INTPRI2QID_CTRL(q));
-	}
-}
-
-/* Sets the CPU queue depending on the internal priority of a packet */
-void rtl83xx_setup_prio2queue_cpu_matrix(int *max_queues)
-{
-	int reg = soc_info.family == RTL8380_FAMILY_ID ? RTL838X_QM_PKT2CPU_INTPRI_MAP 
-					: RTL839X_QM_PKT2CPU_INTPRI_MAP;
-	int i;
-	u32 v;
-
-	pr_info("QM_PKT2CPU_INTPRI_MAP: %08x\n", sw_r32(reg));
-	for (i = 0; i < MAX_PRIOS; i++)
-		v |= max_queues[i] << (i * 3);
-	sw_w32(v, reg);
-}
-
-void rtl83xx_setup_default_prio2queue(void)
-{
-	if (soc_info.family == RTL8380_FAMILY_ID) {
-		rtl838x_setup_prio2queue_matrix(max_available_queue);
-	} else {
-		rtl839x_setup_prio2queue_matrix(max_available_queue);
-	}
-	rtl83xx_setup_prio2queue_cpu_matrix(max_available_queue);
-}
-
-/* Sets the output queue assigned to a port, the port can be the CPU-port */
-void rtl839x_set_egress_queue(int port, int queue)
-{
-	sw_w32(queue << ((port % 10) *3), RTL839X_QM_PORT_QNUM(port));
-}
-
-/* Sets the priority assigned of an ingress port, the port can be the CPU-port */
-void rtl83xx_set_ingress_priority(int port, int priority)
-{
-	if (soc_info.family == RTL8380_FAMILY_ID)
-		sw_w32(priority << ((port % 10) *3), RTL838X_PRI_SEL_PORT_PRI(port));
-	else
-		sw_w32(priority << ((port % 10) *3), RTL839X_PRI_SEL_PORT_PRI(port));
-	
-}
-
-int rtl839x_get_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port)
-{
-	u32 v;
-
-	mutex_lock(&priv->reg_mutex);
-
-	rtl839x_read_scheduling_table(port);
-	v = sw_r32(RTL839X_TBL_ACCESS_DATA_2(8));
-
-	mutex_unlock(&priv->reg_mutex);
-
-	if (v & BIT(19))
-		return WEIGHTED_ROUND_ROBIN;
-	return WEIGHTED_FAIR_QUEUE;
-}
-
-void rtl839x_set_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port,
-				      enum scheduler_type sched)
-{
-	enum scheduler_type t = rtl839x_get_scheduling_algorithm(priv, port);
-	u32 v, oam_state, oam_port_state;
-	u32 count;
-	int i, egress_rate;
-
-	mutex_lock(&priv->reg_mutex);
-	/* Check whether we need to empty the egress queue of that port due to Errata E0014503 */
-	if (sched == WEIGHTED_FAIR_QUEUE && t == WEIGHTED_ROUND_ROBIN && port != priv->cpu_port) {
-		// Read Operations, Adminstatrion and Management control register
-		oam_state = sw_r32(RTL839X_OAM_CTRL);
-
-		// Get current OAM state
-		oam_port_state = sw_r32(RTL839X_OAM_PORT_ACT_CTRL(port));
-	
-		// Disable OAM to block traffice
-		v = sw_r32(RTL839X_OAM_CTRL);
-		sw_w32_mask(0, 1, RTL839X_OAM_CTRL);
-		v = sw_r32(RTL839X_OAM_CTRL);
-
-		// Set to trap action OAM forward (bits 1, 2) and OAM Mux Action Drop (bit 0)
-		sw_w32(0x2, RTL839X_OAM_PORT_ACT_CTRL(port));
-
-		// Set port egress rate to unlimited
-		egress_rate = rtl839x_set_egress_rate(priv, port, 0xFFFFF);
-	
-		// Wait until the egress used page count of that port is 0
-		i = 0;
-		do {
-			usleep_range(100, 200);
-			rtl839x_read_out_q_table(port);
-			count = sw_r32(RTL839X_TBL_ACCESS_DATA_2(6));
-			count >>= 20;
-			i++;
-		} while (i < 3500 && count > 0);
-	}
-
-	// Actually set the scheduling algorithm
-	rtl839x_read_scheduling_table(port);
-	sw_w32_mask(BIT(19), sched ? BIT(19) : 0, RTL839X_TBL_ACCESS_DATA_2(8));
-	rtl839x_write_scheduling_table(port);
-
-	if (sched == WEIGHTED_FAIR_QUEUE && t == WEIGHTED_ROUND_ROBIN && port != priv->cpu_port) {
-		// Restore OAM state to control register
-		sw_w32(oam_state, RTL839X_OAM_CTRL);
-
-		// Restore trap action state
-		sw_w32(oam_port_state, RTL839X_OAM_PORT_ACT_CTRL(port));
-
-		// Restore port egress rate
-		rtl839x_set_egress_rate(priv, port, egress_rate);
-	}
-
-	mutex_unlock(&priv->reg_mutex);
-}
-
-void rtl839x_set_scheduling_queue_weights(struct rtl838x_switch_priv *priv, int port,
-					  int *queue_weights)
-{
-	int i, lsb, low_byte, start_bit, high_mask;
-
-	mutex_lock(&priv->reg_mutex);
-
-	rtl839x_read_scheduling_table(port);
-
-	for (i = 0; i < 8; i++) {
-		lsb = 48 + i * 8;
-		low_byte = 8 - (lsb >> 5);
-		start_bit = lsb - (low_byte << 5);
-		high_mask = 0x3ff >> (32 - start_bit);
-		sw_w32_mask(0x3ff << start_bit, (queue_weights[i] & 0x3ff) << start_bit,
-				RTL839X_TBL_ACCESS_DATA_2(low_byte));
-		if (high_mask)
-			sw_w32_mask(high_mask, (queue_weights[i] & 0x3ff) >> (32- start_bit),
-					RTL839X_TBL_ACCESS_DATA_2(low_byte - 1));
-	}
-
-	rtl839x_write_scheduling_table(port);
-	mutex_unlock(&priv->reg_mutex);
-}
-
-void rtl838x_config_qos(void)
-{
-	int i, p;
-	u32 v;
-
-	pr_info("Setting up RTL838X QoS\n");
-	pr_info("RTL838X_PRI_SEL_TBL_CTRL(i): %08x\n", sw_r32(RTL838X_PRI_SEL_TBL_CTRL(0)));
-	rtl83xx_setup_default_prio2queue();
-
-	// Enable inner (bit 12) and outer (bit 13) priority remapping from DSCP
-	sw_w32_mask(0, BIT(12) | BIT(13), RTL838X_PRI_DSCP_INVLD_CTRL0);
-
-	/* Set default weight for calculating internal priority, in prio selection group 0
-	 * Port based (prio 3), Port outer-tag (4), DSCP (5), Inner Tag (6), Outer Tag (7)
-	 */
-	v = 3 | (4 << 3) | (5 << 6) | (6 << 9) | (7 << 12);
-	sw_w32(v, RTL838X_PRI_SEL_TBL_CTRL(0));
-
-	// Set the inner and outer priority one-to-one to re-marked outer dot1p priority
-	v = 0;
-	for (p = 0; p < 8; p++)
-		v |= p << (3 * p);
-	sw_w32(v, RTL838X_RMK_OPRI_CTRL);
-	sw_w32(v, RTL838X_RMK_IPRI_CTRL);
-
-	v = 0;
-	for (p = 0; p < 8; p++)
-		v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3);
-	sw_w32(v, RTL838X_PRI_SEL_IPRI_REMAP);
-
-	// On all ports set scheduler type to WFQ
-	for (i = 0; i <= soc_info.cpu_port; i++)
-		sw_w32(0, RTL838X_SCHED_P_TYPE_CTRL(i));
-
-	// Enable egress scheduler for CPU-Port
-	sw_w32_mask(0, BIT(8), RTL838X_SCHED_LB_CTRL(soc_info.cpu_port));
-
-	// Enable egress drop allways on
-	sw_w32_mask(0, BIT(11), RTL838X_FC_P_EGR_DROP_CTRL(soc_info.cpu_port));
-
-	// Give special trap frames priority 7 (BPDUs) and routing exceptions:
-	sw_w32_mask(0, 7 << 3 | 7, RTL838X_QM_PKT2CPU_INTPRI_2);
-	// Give RMA frames priority 7:
-	sw_w32_mask(0, 7, RTL838X_QM_PKT2CPU_INTPRI_1);
-}
-
-void rtl839x_config_qos(void)
-{
-	int port, p, q;
-	u32 v;
-	struct rtl838x_switch_priv *priv = switch_priv;
-
-	pr_info("Setting up RTL839X QoS\n");
-	pr_info("RTL839X_PRI_SEL_TBL_CTRL(i): %08x\n", sw_r32(RTL839X_PRI_SEL_TBL_CTRL(0)));
-	rtl83xx_setup_default_prio2queue();
-
-	for (port = 0; port < soc_info.cpu_port; port++)
-		sw_w32(7, RTL839X_QM_PORT_QNUM(port));
-
-	// CPU-port gets queue number 7
-	sw_w32(7, RTL839X_QM_PORT_QNUM(soc_info.cpu_port));
-
-	for (port = 0; port <= soc_info.cpu_port; port++) {
-		rtl83xx_set_ingress_priority(port, 0);
-		rtl839x_set_scheduling_algorithm(priv, port, WEIGHTED_FAIR_QUEUE);
-		rtl839x_set_scheduling_queue_weights(priv, port, default_queue_weights);
-		// Do re-marking based on outer tag
-		sw_w32_mask(0, BIT(port % 32), RTL839X_RMK_PORT_DEI_TAG_CTRL(port));
-	}
-
-	// Remap dot1p priorities to internal priority, for this the outer tag needs be re-marked
-	v = 0;
-	for (p = 0; p < 8; p++)
-		v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3);
-	sw_w32(v, RTL839X_PRI_SEL_IPRI_REMAP);
-	
-	/* Configure Drop Precedence for Drop Eligible Indicator (DEI)
-	 * Index 0: 0
-	 * Index 1: 2
-	 * Each indicator is 2 bits long
-	 */
-	sw_w32(2 << 2, RTL839X_PRI_SEL_DEI2DP_REMAP);
-
-	// Re-mark DEI: 4 bit-fields of 2 bits each, field 0 is bits 0-1, ...
-	sw_w32((0x1 << 2) | (0x1 << 4), RTL839X_RMK_DEI_CTRL);
-
-	/* Set Congestion avoidance drop probability to 0 for drop precedences 0-2 (bits 24-31)
-	 * low threshold (bits 0-11) to 4095 and high threshold (bits 12-23) to 4095
-	 * Weighted Random Early Detection (WRED) is used
-	 */
-	sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(0));
-	sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(1));
-	sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(2));
-
-	/* Set queue-based congestion avoidance properties, register fields are as
-	 * for forward RTL839X_WRED_PORT_THR_CTRL
-	 */
-	for (q = 0; q < 8; q++) {
-		sw_w32(255 << 24 | 78 << 12 | 68, RTL839X_WRED_QUEUE_THR_CTRL(q, 0));
-		sw_w32(255 << 24 | 74 << 12 | 64, RTL839X_WRED_QUEUE_THR_CTRL(q, 0));
-		sw_w32(255 << 24 | 70 << 12 | 60, RTL839X_WRED_QUEUE_THR_CTRL(q, 0));
-	}
-}
-
-void __init rtl83xx_setup_qos(struct rtl838x_switch_priv *priv)
-{
-	switch_priv = priv;
-
-	pr_info("In %s\n", __func__);
-
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		return rtl838x_config_qos();
-	else if (priv->family_id == RTL8390_FAMILY_ID)
-		return rtl839x_config_qos();
-
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		rtl838x_rate_control_init(priv);
-	else if (priv->family_id == RTL8390_FAMILY_ID)
-		rtl839x_rate_control_init(priv);
-	
-}
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c
deleted file mode 100644
index 74ad03127687..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c
+++ /dev/null
@@ -1,2064 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-#include <linux/iopoll.h>
-#include <net/nexthop.h>
-
-#include "rtl83xx.h"
-
-#define RTL838X_VLAN_PORT_TAG_STS_UNTAG				0x0
-#define RTL838X_VLAN_PORT_TAG_STS_TAGGED			0x1
-#define RTL838X_VLAN_PORT_TAG_STS_PRIORITY_TAGGED		0x2
-
-#define RTL838X_VLAN_PORT_TAG_STS_CTRL_BASE			0xA530
-/* port 0-28 */
-#define RTL838X_VLAN_PORT_TAG_STS_CTRL(port) \
-		RTL838X_VLAN_PORT_TAG_STS_CTRL_BASE + (port << 2)
-
-#define RTL838X_VLAN_PORT_TAG_STS_CTRL_EGR_P_OTAG_KEEP_MASK	GENMASK(11,10)
-#define RTL838X_VLAN_PORT_TAG_STS_CTRL_EGR_P_ITAG_KEEP_MASK	GENMASK(9,8)
-#define RTL838X_VLAN_PORT_TAG_STS_CTRL_IGR_P_OTAG_KEEP_MASK	GENMASK(7,6)
-#define RTL838X_VLAN_PORT_TAG_STS_CTRL_IGR_P_ITAG_KEEP_MASK	GENMASK(5,4)
-#define RTL838X_VLAN_PORT_TAG_STS_CTRL_OTAG_STS_MASK		GENMASK(3,2)
-#define RTL838X_VLAN_PORT_TAG_STS_CTRL_ITAG_STS_MASK		GENMASK(1,0)
-
-extern struct mutex smi_lock;
-
-// see_dal_maple_acl_log2PhyTmplteField and src/app/diag_v2/src/diag_acl.c
-/* Definition of the RTL838X-specific template field IDs as used in the PIE */
-enum template_field_id {
-	TEMPLATE_FIELD_SPMMASK = 0,
-	TEMPLATE_FIELD_SPM0 = 1,	// Source portmask ports 0-15
-	TEMPLATE_FIELD_SPM1 = 2,	// Source portmask ports 16-28
-	TEMPLATE_FIELD_RANGE_CHK = 3,
-	TEMPLATE_FIELD_DMAC0 = 4,	// Destination MAC [15:0]
-	TEMPLATE_FIELD_DMAC1 = 5,	// Destination MAC [31:16]
-	TEMPLATE_FIELD_DMAC2 = 6,	// Destination MAC [47:32]
-	TEMPLATE_FIELD_SMAC0 = 7,	// Source MAC [15:0]
-	TEMPLATE_FIELD_SMAC1 = 8,	// Source MAC [31:16]
-	TEMPLATE_FIELD_SMAC2 = 9,	// Source MAC [47:32]
-	TEMPLATE_FIELD_ETHERTYPE = 10,	// Ethernet typ
-	TEMPLATE_FIELD_OTAG = 11,	// Outer VLAN tag
-	TEMPLATE_FIELD_ITAG = 12,	// Inner VLAN tag
-	TEMPLATE_FIELD_SIP0 = 13,	// IPv4 or IPv6 source IP[15:0] or ARP/RARP
-					// source protocol address in header
-	TEMPLATE_FIELD_SIP1 = 14,	// IPv4 or IPv6 source IP[31:16] or ARP/RARP
-	TEMPLATE_FIELD_DIP0 = 15,	// IPv4 or IPv6 destination IP[15:0]
-	TEMPLATE_FIELD_DIP1 = 16,	// IPv4 or IPv6 destination IP[31:16]
-	TEMPLATE_FIELD_IP_TOS_PROTO = 17, // IPv4 TOS/IPv6 traffic class and
-					  // IPv4 proto/IPv6 next header fields
-	TEMPLATE_FIELD_L34_HEADER = 18,	// packet with extra tag and IPv6 with auth, dest,
-					// frag, route, hop-by-hop option header,
-					// IGMP type, TCP flag
-	TEMPLATE_FIELD_L4_SPORT = 19,	// TCP/UDP source port
-	TEMPLATE_FIELD_L4_DPORT = 20,	// TCP/UDP destination port
-	TEMPLATE_FIELD_ICMP_IGMP = 21,
-	TEMPLATE_FIELD_IP_RANGE = 22,
-	TEMPLATE_FIELD_FIELD_SELECTOR_VALID = 23, // Field selector mask
-	TEMPLATE_FIELD_FIELD_SELECTOR_0 = 24,
-	TEMPLATE_FIELD_FIELD_SELECTOR_1 = 25,
-	TEMPLATE_FIELD_FIELD_SELECTOR_2 = 26,
-	TEMPLATE_FIELD_FIELD_SELECTOR_3 = 27,
-	TEMPLATE_FIELD_SIP2 = 28,	// IPv6 source IP[47:32]
-	TEMPLATE_FIELD_SIP3 = 29,	// IPv6 source IP[63:48]
-	TEMPLATE_FIELD_SIP4 = 30,	// IPv6 source IP[79:64]
-	TEMPLATE_FIELD_SIP5 = 31,	// IPv6 source IP[95:80]
-	TEMPLATE_FIELD_SIP6 = 32,	// IPv6 source IP[111:96]
-	TEMPLATE_FIELD_SIP7 = 33,	// IPv6 source IP[127:112]
-	TEMPLATE_FIELD_DIP2 = 34,	// IPv6 destination IP[47:32]
-	TEMPLATE_FIELD_DIP3 = 35,	// IPv6 destination IP[63:48]
-	TEMPLATE_FIELD_DIP4 = 36,	// IPv6 destination IP[79:64]
-	TEMPLATE_FIELD_DIP5 = 37,	// IPv6 destination IP[95:80]
-	TEMPLATE_FIELD_DIP6 = 38,	// IPv6 destination IP[111:96]
-	TEMPLATE_FIELD_DIP7 = 39,	// IPv6 destination IP[127:112]
-	TEMPLATE_FIELD_FWD_VID = 40,	// Forwarding VLAN-ID
-	TEMPLATE_FIELD_FLOW_LABEL = 41,
-};
-
-/*
- * The RTL838X SoCs use 5 fixed templates with definitions for which data fields are to
- * be copied from the Ethernet Frame header into the 12 User-definable fields of the Packet
- * Inspection Engine's buffer. The following defines the field contents for each of the fixed
- * templates. Additionally, 3 user-definable templates can be set up via the definitions
- * in RTL838X_ACL_TMPLTE_CTRL control registers.
- * TODO: See all src/app/diag_v2/src/diag_pie.c
- */
-#define N_FIXED_TEMPLATES 5
-static enum template_field_id fixed_templates[N_FIXED_TEMPLATES][N_FIXED_FIELDS] =
-{
-	{
-	  TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1, TEMPLATE_FIELD_OTAG,
-	  TEMPLATE_FIELD_SMAC0, TEMPLATE_FIELD_SMAC1, TEMPLATE_FIELD_SMAC2,
-	  TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2,
-	  TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_ITAG, TEMPLATE_FIELD_RANGE_CHK
-	}, {
-	  TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0,
-	  TEMPLATE_FIELD_DIP1,TEMPLATE_FIELD_IP_TOS_PROTO, TEMPLATE_FIELD_L4_SPORT,
-	  TEMPLATE_FIELD_L4_DPORT, TEMPLATE_FIELD_ICMP_IGMP, TEMPLATE_FIELD_ITAG,
-	  TEMPLATE_FIELD_RANGE_CHK, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1
-	}, {
-	  TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2,
-	  TEMPLATE_FIELD_ITAG, TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_IP_TOS_PROTO,
-	  TEMPLATE_FIELD_L4_DPORT, TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_SIP0,
-	  TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0, TEMPLATE_FIELD_DIP1
-	}, {
-	  TEMPLATE_FIELD_DIP0, TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_DIP2,
-	  TEMPLATE_FIELD_DIP3, TEMPLATE_FIELD_DIP4, TEMPLATE_FIELD_DIP5,
-	  TEMPLATE_FIELD_DIP6, TEMPLATE_FIELD_DIP7, TEMPLATE_FIELD_L4_DPORT,
-	  TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_ICMP_IGMP, TEMPLATE_FIELD_IP_TOS_PROTO
-	}, {
-	  TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_SIP2,
-	  TEMPLATE_FIELD_SIP3, TEMPLATE_FIELD_SIP4, TEMPLATE_FIELD_SIP5,
-	  TEMPLATE_FIELD_SIP6, TEMPLATE_FIELD_SIP7, TEMPLATE_FIELD_ITAG,
-	  TEMPLATE_FIELD_RANGE_CHK, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1
-	},
-};
-
-void rtl838x_print_matrix(void)
-{
-	unsigned volatile int *ptr8;
-	int i;
-
-	ptr8 = RTL838X_SW_BASE + RTL838X_PORT_ISO_CTRL(0);
-	for (i = 0; i < 28; i += 8)
-		pr_debug("> %8x %8x %8x %8x %8x %8x %8x %8x\n",
-			ptr8[i + 0], ptr8[i + 1], ptr8[i + 2], ptr8[i + 3],
-			ptr8[i + 4], ptr8[i + 5], ptr8[i + 6], ptr8[i + 7]);
-	pr_debug("CPU_PORT> %8x\n", ptr8[28]);
-}
-
-static inline int rtl838x_port_iso_ctrl(int p)
-{
-	return RTL838X_PORT_ISO_CTRL(p);
-}
-
-static inline void rtl838x_exec_tbl0_cmd(u32 cmd)
-{
-	sw_w32(cmd, RTL838X_TBL_ACCESS_CTRL_0);
-	do { } while (sw_r32(RTL838X_TBL_ACCESS_CTRL_0) & BIT(15));
-}
-
-static inline void rtl838x_exec_tbl1_cmd(u32 cmd)
-{
-	sw_w32(cmd, RTL838X_TBL_ACCESS_CTRL_1);
-	do { } while (sw_r32(RTL838X_TBL_ACCESS_CTRL_1) & BIT(15));
-}
-
-static inline int rtl838x_tbl_access_data_0(int i)
-{
-	return RTL838X_TBL_ACCESS_DATA_0(i);
-}
-
-static void rtl838x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info)
-{
-	u32 v;
-	// Read VLAN table (0) via register 0
-	struct table_reg *r = rtl_table_get(RTL8380_TBL_0, 0);
-
-	rtl_table_read(r, vlan);
-	info->tagged_ports = sw_r32(rtl_table_data(r, 0));
-	v = sw_r32(rtl_table_data(r, 1));
-	pr_debug("VLAN_READ %d: %016llx %08x\n", vlan, info->tagged_ports, v);
-	rtl_table_release(r);
-
-	info->profile_id = v & 0x7;
-	info->hash_mc_fid = !!(v & 0x8);
-	info->hash_uc_fid = !!(v & 0x10);
-	info->fid = (v >> 5) & 0x3f;
-
-	// Read UNTAG table (0) via table register 1
-	r = rtl_table_get(RTL8380_TBL_1, 0);
-	rtl_table_read(r, vlan);
-	info->untagged_ports = sw_r32(rtl_table_data(r, 0));
-	rtl_table_release(r);
-}
-
-static void rtl838x_vlan_set_tagged(u32 vlan, struct rtl838x_vlan_info *info)
-{
-	u32 v;
-	// Access VLAN table (0) via register 0
-	struct table_reg *r = rtl_table_get(RTL8380_TBL_0, 0);
-
-	sw_w32(info->tagged_ports, rtl_table_data(r, 0));
-
-	v = info->profile_id;
-	v |= info->hash_mc_fid ? 0x8 : 0;
-	v |= info->hash_uc_fid ? 0x10 : 0;
-	v |= ((u32)info->fid) << 5;
-	sw_w32(v, rtl_table_data(r, 1));
-
-	rtl_table_write(r, vlan);
-	rtl_table_release(r);
-}
-
-static void rtl838x_vlan_set_untagged(u32 vlan, u64 portmask)
-{
-	// Access UNTAG table (0) via register 1
-	struct table_reg *r = rtl_table_get(RTL8380_TBL_1, 0);
-
-	sw_w32(portmask & 0x1fffffff, rtl_table_data(r, 0));
-	rtl_table_write(r, vlan);
-	rtl_table_release(r);
-}
-
-/* Sets the L2 forwarding to be based on either the inner VLAN tag or the outer
- */
-static void rtl838x_vlan_fwd_on_inner(int port, bool is_set)
-{
-	if (is_set)
-		sw_w32_mask(BIT(port), 0, RTL838X_VLAN_PORT_FWD);
-	else
-		sw_w32_mask(0, BIT(port), RTL838X_VLAN_PORT_FWD);
-}
-
-static u64 rtl838x_l2_hash_seed(u64 mac, u32 vid)
-{
-	return mac << 12 | vid;
-}
-
-/*
- * Applies the same hash algorithm as the one used currently by the ASIC to the seed
- * and returns a key into the L2 hash table
- */
-static u32 rtl838x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed)
-{
-	u32 h1, h2, h3, h;
-
-	if (sw_r32(priv->r->l2_ctrl_0) & 1) {
-		h1 = (seed >> 11) & 0x7ff;
-		h1 = ((h1 & 0x1f) << 6) | ((h1 >> 5) & 0x3f);
-
-		h2 = (seed >> 33) & 0x7ff;
-		h2 = ((h2 & 0x3f) << 5) | ((h2 >> 6) & 0x1f);
-
-		h3 = (seed >> 44) & 0x7ff;
-		h3 = ((h3 & 0x7f) << 4) | ((h3 >> 7) & 0xf);
-
-		h = h1 ^ h2 ^ h3 ^ ((seed >> 55) & 0x1ff);
-		h ^= ((seed >> 22) & 0x7ff) ^ (seed & 0x7ff);
-	} else {
-		h = ((seed >> 55) & 0x1ff) ^ ((seed >> 44) & 0x7ff)
-			^ ((seed >> 33) & 0x7ff) ^ ((seed >> 22) & 0x7ff)
-			^ ((seed >> 11) & 0x7ff) ^ (seed & 0x7ff);
-	}
-
-	return h;
-}
-
-static inline int rtl838x_mac_force_mode_ctrl(int p)
-{
-	return RTL838X_MAC_FORCE_MODE_CTRL + (p << 2);
-}
-
-static inline int rtl838x_mac_port_ctrl(int p)
-{
-	return RTL838X_MAC_PORT_CTRL(p);
-}
-
-static inline int rtl838x_l2_port_new_salrn(int p)
-{
-	return RTL838X_L2_PORT_NEW_SALRN(p);
-}
-
-static inline int rtl838x_l2_port_new_sa_fwd(int p)
-{
-	return RTL838X_L2_PORT_NEW_SA_FWD(p);
-}
-
-static inline int rtl838x_mac_link_spd_sts(int p)
-{
-	return RTL838X_MAC_LINK_SPD_STS(p);
-}
-
-inline static int rtl838x_trk_mbr_ctr(int group)
-{
-	return RTL838X_TRK_MBR_CTR + (group << 2);
-}
-
-/*
- * Fills an L2 entry structure from the SoC registers
- */
-static void rtl838x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e)
-{
-	/* Table contains different entry types, we need to identify the right one:
-	 * Check for MC entries, first
-	 * In contrast to the RTL93xx SoCs, there is no valid bit, use heuristics to
-	 * identify valid entries
-	 */
-	e->is_ip_mc = !!(r[0] & BIT(22));
-	e->is_ipv6_mc = !!(r[0] & BIT(21));
-	e->type = L2_INVALID;
-
-	if (!e->is_ip_mc && !e->is_ipv6_mc) {
-		e->mac[0] = (r[1] >> 20);
-		e->mac[1] = (r[1] >> 12);
-		e->mac[2] = (r[1] >> 4);
-		e->mac[3] = (r[1] & 0xf) << 4 | (r[2] >> 28);
-		e->mac[4] = (r[2] >> 20);
-		e->mac[5] = (r[2] >> 12);
-
-		e->rvid = r[2] & 0xfff;
-		e->vid = r[0] & 0xfff;
-
-		/* Is it a unicast entry? check multicast bit */
-		if (!(e->mac[0] & 1)) {
-			e->is_static = !!((r[0] >> 19) & 1);
-			e->port = (r[0] >> 12) & 0x1f;
-			e->block_da = !!(r[1] & BIT(30));
-			e->block_sa = !!(r[1] & BIT(31));
-			e->suspended = !!(r[1] & BIT(29));
-			e->next_hop = !!(r[1] & BIT(28));
-			if (e->next_hop) {
-				pr_debug("Found next hop entry, need to read extra data\n");
-				e->nh_vlan_target = !!(r[0] & BIT(9));
-				e->nh_route_id = r[0] & 0x1ff;
-				e->vid = e->rvid;
-			}
-			e->age = (r[0] >> 17) & 0x3;
-			e->valid = true;
-			
-			/* A valid entry has one of mutli-cast, aging, sa/da-blocking,
-			 * next-hop or static entry bit set */
-			if (!(r[0] & 0x007c0000) && !(r[1] & 0xd0000000))
-				e->valid = false;
-			else
-				e->type = L2_UNICAST;
-		} else { // L2 multicast
-			pr_debug("Got L2 MC entry: %08x %08x %08x\n", r[0], r[1], r[2]);
-			e->valid = true;
-			e->type = L2_MULTICAST;
-			e->mc_portmask_index = (r[0] >> 12) & 0x1ff;
-		}
-	} else { // IPv4 and IPv6 multicast
-		e->valid = true;
-		e->mc_portmask_index = (r[0] >> 12) & 0x1ff;
-		e->mc_gip = (r[1] << 20) | (r[2] >> 12);
-		e->rvid = r[2] & 0xfff;
-	}
-	if (e->is_ip_mc)
-		e->type = IP4_MULTICAST;
-	if (e->is_ipv6_mc)
-		e->type = IP6_MULTICAST;
-}
-
-/*
- * Fills the 3 SoC table registers r[] with the information of in the rtl838x_l2_entry
- */
-static void rtl838x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e)
-{
-	u64 mac = ether_addr_to_u64(e->mac);
-
-	if (!e->valid) {
-		r[0] = r[1] = r[2] = 0;
-		return;
-	}
-
-	r[0] = e->is_ip_mc ? BIT(22) : 0;
-	r[0] |= e->is_ipv6_mc ? BIT(21) : 0;
-
-	if (!e->is_ip_mc && !e->is_ipv6_mc) {
-		r[1] = mac >> 20;
-		r[2] = (mac & 0xfffff) << 12;
-
-		/* Is it a unicast entry? check multicast bit */
-		if (!(e->mac[0] & 1)) {
-			r[0] |= e->is_static ? BIT(19) : 0;
-			r[0] |= (e->port & 0x3f) << 12;
-			r[0] |= e->vid;
-			r[1] |= e->block_da ? BIT(30) : 0;
-			r[1] |= e->block_sa ? BIT(31) : 0;
-			r[1] |= e->suspended ? BIT(29) : 0;
-			r[2] |= e->rvid & 0xfff;
-			if (e->next_hop) {
-				r[1] |= BIT(28);
-				r[0] |= e->nh_vlan_target ? BIT(9) : 0;
-				r[0] |= e->nh_route_id & 0x1ff;
-			}
-			r[0] |= (e->age & 0x3) << 17;
-		} else { // L2 Multicast
-			r[0] |= (e->mc_portmask_index & 0x1ff) << 12;
-			r[2] |= e->rvid & 0xfff;
-			r[0] |= e->vid & 0xfff;
-			pr_debug("FILL MC: %08x %08x %08x\n", r[0], r[1], r[2]);
-		}
-	} else { // IPv4 and IPv6 multicast
-		r[0] |= (e->mc_portmask_index & 0x1ff) << 12;
-		r[1] = e->mc_gip >> 20;
-		r[2] = e->mc_gip << 12;
-		r[2] |= e->rvid;
-	}
-}
-
-/*
- * Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table
- * hash is the id of the bucket and pos is the position of the entry in that bucket
- * The data read from the SoC is filled into rtl838x_l2_entry
- */
-static u64 rtl838x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e)
-{
-	u64 entry;
-	u32 r[3];
-	struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 0); // Access L2 Table 0
-	u32 idx = (0 << 14) | (hash << 2) | pos; // Search SRAM, with hash and at pos in bucket
-	int i;
-
-	rtl_table_read(q, idx);
-	for (i= 0; i < 3; i++)
-		r[i] = sw_r32(rtl_table_data(q, i));
-
-	rtl_table_release(q);
-
-	rtl838x_fill_l2_entry(r, e);
-	if (!e->valid)
-		return 0;
-
-	entry = (((u64) r[1]) << 32) | (r[2]);  // mac and vid concatenated as hash seed
-	return entry;
-}
-
-static void rtl838x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e)
-{
-	u32 r[3];
-	struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 0);
-	int i;
-
-	u32 idx = (0 << 14) | (hash << 2) | pos; // Access SRAM, with hash and at pos in bucket
-
-	rtl838x_fill_l2_row(r, e);
-
-	for (i= 0; i < 3; i++)
-		sw_w32(r[i], rtl_table_data(q, i));
-
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-}
-
-static u64 rtl838x_read_cam(int idx, struct rtl838x_l2_entry *e)
-{
-	u64 entry;
-	u32 r[3];
-	struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 1); // Access L2 Table 1
-	int i;
-
-	rtl_table_read(q, idx);
-	for (i= 0; i < 3; i++)
-		r[i] = sw_r32(rtl_table_data(q, i));
-
-	rtl_table_release(q);
-
-	rtl838x_fill_l2_entry(r, e);
-	if (!e->valid)
-		return 0;
-
-	pr_debug("Found in CAM: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]);
-
-	// Return MAC with concatenated VID ac concatenated ID
-	entry = (((u64) r[1]) << 32) | r[2];
-	return entry;
-}
-
-static void rtl838x_write_cam(int idx, struct rtl838x_l2_entry *e)
-{
-	u32 r[3];
-	struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 1); // Access L2 Table 1
-	int i;
-
-	rtl838x_fill_l2_row(r, e);
-
-	for (i= 0; i < 3; i++)
-		sw_w32(r[i], rtl_table_data(q, i));
-
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-}
-
-static u64 rtl838x_read_mcast_pmask(int idx)
-{
-	u32 portmask;
-	// Read MC_PMSK (2) via register RTL8380_TBL_L2
-	struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 2);
-
-	rtl_table_read(q, idx);
-	portmask = sw_r32(rtl_table_data(q, 0));
-	rtl_table_release(q);
-
-	return portmask;
-}
-
-static void rtl838x_write_mcast_pmask(int idx, u64 portmask)
-{
-	// Access MC_PMSK (2) via register RTL8380_TBL_L2
-	struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 2);
-
-	sw_w32(((u32)portmask) & 0x1fffffff, rtl_table_data(q, 0));
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-}
-
-static void rtl838x_vlan_profile_setup(int profile)
-{
-	u32 pmask_id = UNKNOWN_MC_PMASK;
-	// Enable L2 Learning BIT 0, portmask UNKNOWN_MC_PMASK for unknown MC traffic flooding
-	u32 p = 1 | pmask_id << 1 | pmask_id << 10 | pmask_id << 19;
-
-	sw_w32(p, RTL838X_VLAN_PROFILE(profile));
-
-	/* RTL8380 and RTL8390 use an index into the portmask table to set the
-	 * unknown multicast portmask, setup a default at a safe location
-	 * On RTL93XX, the portmask is directly set in the profile,
-	 * see e.g. rtl9300_vlan_profile_setup
-	 */
-	rtl838x_write_mcast_pmask(UNKNOWN_MC_PMASK, 0x1fffffff);
-}
-
-static void rtl838x_l2_learning_setup(void)
-{
-	/* Set portmask for broadcast traffic and unknown unicast address flooding
-	 * to the reserved entry in the portmask table used also for
-	 * multicast flooding */
-	sw_w32(UNKNOWN_MC_PMASK << 12 | UNKNOWN_MC_PMASK, RTL838X_L2_FLD_PMSK);
-
-	/* Enable learning constraint system-wide (bit 0), per-port (bit 1)
-	 * and per vlan (bit 2) */
-	sw_w32(0x7, RTL838X_L2_LRN_CONSTRT_EN);
-
-	// Limit learning to maximum: 16k entries, after that just flood (bits 0-1)
-	sw_w32((0x3fff << 2) | 0, RTL838X_L2_LRN_CONSTRT);
-
-	// Do not trap ARP packets to CPU_PORT
-	sw_w32(0, RTL838X_SPCL_TRAP_ARP_CTRL);
-}
-
-static void rtl838x_enable_learning(int port, bool enable)
-{
-	// Limit learning to maximum: 16k entries
-
-	sw_w32_mask(0x3fff << 2, enable ? (0x3fff << 2) : 0,
-		    RTL838X_L2_PORT_LRN_CONSTRT + (port << 2));
-}
-
-static void rtl838x_enable_flood(int port, bool enable)
-{
-	/*
-	 * 0: Forward
-	 * 1: Disable
-	 * 2: to CPU
-	 * 3: Copy to CPU
-	 */
-	sw_w32_mask(0x3, enable ? 0 : 1,
-		    RTL838X_L2_PORT_LRN_CONSTRT + (port << 2));
-}
-
-static void rtl838x_enable_mcast_flood(int port, bool enable)
-{
-
-}
-
-static void rtl838x_enable_bcast_flood(int port, bool enable)
-{
-
-}
-
-static void rtl838x_set_static_move_action(int port, bool forward)
-{
-	int shift = MV_ACT_PORT_SHIFT(port);
-	u32 val = forward ? MV_ACT_FORWARD : MV_ACT_DROP;
-
-	sw_w32_mask(MV_ACT_MASK << shift, val << shift,
-		    RTL838X_L2_PORT_STATIC_MV_ACT(port));
-}
-
-static void rtl838x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
-{
-	int i;
-	u32 cmd = 1 << 15 /* Execute cmd */
-		| 1 << 14 /* Read */
-		| 2 << 12 /* Table type 0b10 */
-		| (msti & 0xfff);
-	priv->r->exec_tbl0_cmd(cmd);
-
-	for (i = 0; i < 2; i++)
-		port_state[i] = sw_r32(priv->r->tbl_access_data_0(i));
-}
-
-static void rtl838x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
-{
-	int i;
-	u32 cmd = 1 << 15 /* Execute cmd */
-		| 0 << 14 /* Write */
-		| 2 << 12 /* Table type 0b10 */
-		| (msti & 0xfff);
-
-	for (i = 0; i < 2; i++)
-		sw_w32(port_state[i], priv->r->tbl_access_data_0(i));
-	priv->r->exec_tbl0_cmd(cmd);
-}
-
-u64 rtl838x_traffic_get(int source)
-{
-	return rtl838x_get_port_reg(rtl838x_port_iso_ctrl(source));
-}
-
-void rtl838x_traffic_set(int source, u64 dest_matrix)
-{
-	rtl838x_set_port_reg(dest_matrix, rtl838x_port_iso_ctrl(source));
-}
-
-void rtl838x_traffic_enable(int source, int dest)
-{
-	rtl838x_mask_port_reg(0, BIT(dest), rtl838x_port_iso_ctrl(source));
-}
-
-void rtl838x_traffic_disable(int source, int dest)
-{
-	rtl838x_mask_port_reg(BIT(dest), 0, rtl838x_port_iso_ctrl(source));
-}
-
-/*
- * Enables or disables the EEE/EEEP capability of a port
- */
-static void rtl838x_port_eee_set(struct rtl838x_switch_priv *priv, int port, bool enable)
-{
-	u32 v;
-
-	// This works only for Ethernet ports, and on the RTL838X, ports from 24 are SFP
-	if (port >= 24)
-		return;
-
-	pr_debug("In %s: setting port %d to %d\n", __func__, port, enable);
-	v = enable ? 0x3 : 0x0;
-
-	// Set EEE state for 100 (bit 9) & 1000MBit (bit 10)
-	sw_w32_mask(0x3 << 9, v << 9, priv->r->mac_force_mode_ctrl(port));
-
-	// Set TX/RX EEE state
-	if (enable) {
-		sw_w32_mask(0, BIT(port), RTL838X_EEE_PORT_TX_EN);
-		sw_w32_mask(0, BIT(port), RTL838X_EEE_PORT_RX_EN);
-	} else {
-		sw_w32_mask(BIT(port), 0, RTL838X_EEE_PORT_TX_EN);
-		sw_w32_mask(BIT(port), 0, RTL838X_EEE_PORT_RX_EN);
-	}
-	priv->ports[port].eee_enabled = enable;
-}
-
-
-/*
- * Get EEE own capabilities and negotiation result
- */
-static int rtl838x_eee_port_ability(struct rtl838x_switch_priv *priv,
-				    struct ethtool_eee *e, int port)
-{
-	u64 link;
-
-	if (port >= 24)
-		return 0;
-
-	link = rtl839x_get_port_reg_le(RTL838X_MAC_LINK_STS);
-	if (!(link & BIT(port)))
-		return 0;
-
-	if (sw_r32(rtl838x_mac_force_mode_ctrl(port)) & BIT(9))
-		e->advertised |= ADVERTISED_100baseT_Full;
-
-	if (sw_r32(rtl838x_mac_force_mode_ctrl(port)) & BIT(10))
-		e->advertised |= ADVERTISED_1000baseT_Full;
-
-	if (sw_r32(RTL838X_MAC_EEE_ABLTY) & BIT(port)) {
-		e->lp_advertised = ADVERTISED_100baseT_Full;
-		e->lp_advertised |= ADVERTISED_1000baseT_Full;
-		return 1;
-	}
-
-	return 0;
-}
-
-static void rtl838x_init_eee(struct rtl838x_switch_priv *priv, bool enable)
-{
-	int i;
-
-	pr_info("Setting up EEE, state: %d\n", enable);
-	sw_w32_mask(0x4, 0, RTL838X_SMI_GLB_CTRL);
-
-	/* Set timers for EEE */
-	sw_w32(0x5001411, RTL838X_EEE_TX_TIMER_GIGA_CTRL);
-	sw_w32(0x5001417, RTL838X_EEE_TX_TIMER_GELITE_CTRL);
-
-	// Enable EEE MAC support on ports
-	for (i = 0; i < priv->cpu_port; i++) {
-		if (priv->ports[i].phy)
-			rtl838x_port_eee_set(priv, i, enable);
-	}
-	priv->eee_enabled = enable;
-}
-
-static void rtl838x_pie_lookup_enable(struct rtl838x_switch_priv *priv, int index)
-{
-	int block = index / PIE_BLOCK_SIZE;
-	u32 block_state = sw_r32(RTL838X_ACL_BLK_LOOKUP_CTRL);
-
-	// Make sure rule-lookup is enabled in the block
-	if (!(block_state & BIT(block)))
-		sw_w32(block_state | BIT(block), RTL838X_ACL_BLK_LOOKUP_CTRL);
-}
-
-static void rtl838x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from, int index_to)
-{
-	int block_from = index_from / PIE_BLOCK_SIZE;
-	int block_to = index_to / PIE_BLOCK_SIZE;
-	u32 v = (index_from << 1)| (index_to << 12 ) | BIT(0);
-	int block;
-	u32 block_state;
-
-	pr_debug("%s: from %d to %d\n", __func__, index_from, index_to);
-	mutex_lock(&priv->reg_mutex);
-
-	// Remember currently active blocks
-	block_state = sw_r32(RTL838X_ACL_BLK_LOOKUP_CTRL);
-
-	// Make sure rule-lookup is disabled in the relevant blocks
-	for (block = block_from; block <= block_to; block++) {
-		if (block_state & BIT(block))
-			sw_w32(block_state & (~BIT(block)), RTL838X_ACL_BLK_LOOKUP_CTRL);
-	}
-
-	// Write from-to and execute bit into control register
-	sw_w32(v, RTL838X_ACL_CLR_CTRL);
-
-	// Wait until command has completed
-	do {
-	} while (sw_r32(RTL838X_ACL_CLR_CTRL) & BIT(0));
-
-	// Re-enable rule lookup
-	for (block = block_from; block <= block_to; block++) {
-		if (!(block_state & BIT(block)))
-			sw_w32(block_state | BIT(block), RTL838X_ACL_BLK_LOOKUP_CTRL);
-	}
-
-	mutex_unlock(&priv->reg_mutex);
-}
-
-/*
- * Reads the intermediate representation of the templated match-fields of the
- * PIE rule in the pie_rule structure and fills in the raw data fields in the
- * raw register space r[].
- * The register space configuration size is identical for the RTL8380/90 and RTL9300,
- * however the RTL9310 has 2 more registers / fields and the physical field-ids
- * are specific to every platform.
- */
-static void rtl838x_write_pie_templated(u32 r[], struct pie_rule *pr, enum template_field_id t[])
-{
-	int i;
-	enum template_field_id field_type;
-	u16 data, data_m;
-
-	for (i = 0; i < N_FIXED_FIELDS; i++) {
-		field_type = t[i];
-		data = data_m = 0;
-
-		switch (field_type) {
-		case TEMPLATE_FIELD_SPM0:
-			data = pr->spm;
-			data_m = pr->spm_m;
-			break;
-		case TEMPLATE_FIELD_SPM1:
-			data = pr->spm >> 16;
-			data_m = pr->spm_m >> 16;
-			break;
-		case TEMPLATE_FIELD_OTAG:
-			data = pr->otag;
-			data_m = pr->otag_m;
-			break;
-		case TEMPLATE_FIELD_SMAC0:
-			data = pr->smac[4];
-			data = (data << 8) | pr->smac[5];
-			data_m = pr->smac_m[4];
-			data_m = (data_m << 8) | pr->smac_m[5];
-			break;
-		case TEMPLATE_FIELD_SMAC1:
-			data = pr->smac[2];
-			data = (data << 8) | pr->smac[3];
-			data_m = pr->smac_m[2];
-			data_m = (data_m << 8) | pr->smac_m[3];
-			break;
-		case TEMPLATE_FIELD_SMAC2:
-			data = pr->smac[0];
-			data = (data << 8) | pr->smac[1];
-			data_m = pr->smac_m[0];
-			data_m = (data_m << 8) | pr->smac_m[1];
-			break;
-		case TEMPLATE_FIELD_DMAC0:
-			data = pr->dmac[4];
-			data = (data << 8) | pr->dmac[5];
-			data_m = pr->dmac_m[4];
-			data_m = (data_m << 8) | pr->dmac_m[5];
-			break;
-		case TEMPLATE_FIELD_DMAC1:
-			data = pr->dmac[2];
-			data = (data << 8) | pr->dmac[3];
-			data_m = pr->dmac_m[2];
-			data_m = (data_m << 8) | pr->dmac_m[3];
-			break;
-		case TEMPLATE_FIELD_DMAC2:
-			data = pr->dmac[0];
-			data = (data << 8) | pr->dmac[1];
-			data_m = pr->dmac_m[0];
-			data_m = (data_m << 8) | pr->dmac_m[1];
-			break;
-		case TEMPLATE_FIELD_ETHERTYPE:
-			data = pr->ethertype;
-			data_m = pr->ethertype_m;
-			break;
-		case TEMPLATE_FIELD_ITAG:
-			data = pr->itag;
-			data_m = pr->itag_m;
-			break;
-		case TEMPLATE_FIELD_RANGE_CHK:
-			data = pr->field_range_check;
-			data_m = pr->field_range_check_m;
-			break;
-		case TEMPLATE_FIELD_SIP0:
-			if (pr->is_ipv6) {
-				data = pr->sip6.s6_addr16[7];
-				data_m = pr->sip6_m.s6_addr16[7];
-			} else {
-				data = pr->sip;
-				data_m = pr->sip_m;
-			}
-			break;
-		case TEMPLATE_FIELD_SIP1:
-			if (pr->is_ipv6) {
-				data = pr->sip6.s6_addr16[6];
-				data_m = pr->sip6_m.s6_addr16[6];
-			} else {
-				data = pr->sip >> 16;
-				data_m = pr->sip_m >> 16;
-			}
-			break;
-
-		case TEMPLATE_FIELD_SIP2:
-		case TEMPLATE_FIELD_SIP3:
-		case TEMPLATE_FIELD_SIP4:
-		case TEMPLATE_FIELD_SIP5:
-		case TEMPLATE_FIELD_SIP6:
-		case TEMPLATE_FIELD_SIP7:
-			data = pr->sip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)];
-			data_m = pr->sip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)];
-			break;
-
-		case TEMPLATE_FIELD_DIP0:
-			if (pr->is_ipv6) {
-				data = pr->dip6.s6_addr16[7];
-				data_m = pr->dip6_m.s6_addr16[7];
-			} else {
-				data = pr->dip;
-				data_m = pr->dip_m;
-			}
-			break;
-
-		case TEMPLATE_FIELD_DIP1:
-			if (pr->is_ipv6) {
-				data = pr->dip6.s6_addr16[6];
-				data_m = pr->dip6_m.s6_addr16[6];
-			} else {
-				data = pr->dip >> 16;
-				data_m = pr->dip_m >> 16;
-			}
-			break;
-
-		case TEMPLATE_FIELD_DIP2:
-		case TEMPLATE_FIELD_DIP3:
-		case TEMPLATE_FIELD_DIP4:
-		case TEMPLATE_FIELD_DIP5:
-		case TEMPLATE_FIELD_DIP6:
-		case TEMPLATE_FIELD_DIP7:
-			data = pr->dip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)];
-			data_m = pr->dip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)];
-			break;
-
-		case TEMPLATE_FIELD_IP_TOS_PROTO:
-			data = pr->tos_proto;
-			data_m = pr->tos_proto_m;
-			break;
-		case TEMPLATE_FIELD_L4_SPORT:
-			data = pr->sport;
-			data_m = pr->sport_m;
-			break;
-		case TEMPLATE_FIELD_L4_DPORT:
-			data = pr->dport;
-			data_m = pr->dport_m;
-			break;
-		case TEMPLATE_FIELD_ICMP_IGMP:
-			data = pr->icmp_igmp;
-			data_m = pr->icmp_igmp_m;
-			break;
-		default:
-			pr_info("%s: unknown field %d\n", __func__, field_type);
-			continue;
-		}
-		if (!(i % 2)) {
-			r[5 - i / 2] = data;
-			r[12 - i / 2] = data_m;
-		} else {
-			r[5 - i / 2] |= ((u32)data) << 16;
-			r[12 - i / 2] |= ((u32)data_m) << 16;
-		}
-	}
-}
-
-/*
- * Creates the intermediate representation of the templated match-fields of the
- * PIE rule in the pie_rule structure by reading the raw data fields in the
- * raw register space r[].
- * The register space configuration size is identical for the RTL8380/90 and RTL9300,
- * however the RTL9310 has 2 more registers / fields and the physical field-ids
- */
-static void rtl838x_read_pie_templated(u32 r[], struct pie_rule *pr, enum template_field_id t[])
-{
-	int i;
-	enum template_field_id field_type;
-	u16 data, data_m;
-
-	for (i = 0; i < N_FIXED_FIELDS; i++) {
-		field_type = t[i];
-		if (!(i % 2)) {
-			data = r[5 - i / 2];
-			data_m = r[12 - i / 2];
-		} else {
-			data = r[5 - i / 2] >> 16;
-			data_m = r[12 - i / 2] >> 16;
-		}
-
-		switch (field_type) {
-		case TEMPLATE_FIELD_SPM0:
-			pr->spm = (pr->spn << 16) | data;
-			pr->spm_m = (pr->spn << 16) | data_m;
-			break;
-		case TEMPLATE_FIELD_SPM1:
-			pr->spm = data;
-			pr->spm_m = data_m;
-			break;
-		case TEMPLATE_FIELD_OTAG:
-			pr->otag = data;
-			pr->otag_m = data_m;
-			break;
-		case TEMPLATE_FIELD_SMAC0:
-			pr->smac[4] = data >> 8;
-			pr->smac[5] = data;
-			pr->smac_m[4] = data >> 8;
-			pr->smac_m[5] = data;
-			break;
-		case TEMPLATE_FIELD_SMAC1:
-			pr->smac[2] = data >> 8;
-			pr->smac[3] = data;
-			pr->smac_m[2] = data >> 8;
-			pr->smac_m[3] = data;
-			break;
-		case TEMPLATE_FIELD_SMAC2:
-			pr->smac[0] = data >> 8;
-			pr->smac[1] = data;
-			pr->smac_m[0] = data >> 8;
-			pr->smac_m[1] = data;
-			break;
-		case TEMPLATE_FIELD_DMAC0:
-			pr->dmac[4] = data >> 8;
-			pr->dmac[5] = data;
-			pr->dmac_m[4] = data >> 8;
-			pr->dmac_m[5] = data;
-			break;
-		case TEMPLATE_FIELD_DMAC1:
-			pr->dmac[2] = data >> 8;
-			pr->dmac[3] = data;
-			pr->dmac_m[2] = data >> 8;
-			pr->dmac_m[3] = data;
-			break;
-		case TEMPLATE_FIELD_DMAC2:
-			pr->dmac[0] = data >> 8;
-			pr->dmac[1] = data;
-			pr->dmac_m[0] = data >> 8;
-			pr->dmac_m[1] = data;
-			break;
-		case TEMPLATE_FIELD_ETHERTYPE:
-			pr->ethertype = data;
-			pr->ethertype_m = data_m;
-			break;
-		case TEMPLATE_FIELD_ITAG:
-			pr->itag = data;
-			pr->itag_m = data_m;
-			break;
-		case TEMPLATE_FIELD_RANGE_CHK:
-			pr->field_range_check = data;
-			pr->field_range_check_m = data_m;
-			break;
-		case TEMPLATE_FIELD_SIP0:
-			pr->sip = data;
-			pr->sip_m = data_m;
-			break;
-		case TEMPLATE_FIELD_SIP1:
-			pr->sip = (pr->sip << 16) | data;
-			pr->sip_m = (pr->sip << 16) | data_m;
-			break;
-		case TEMPLATE_FIELD_SIP2:
-			pr->is_ipv6 = true;
-			// Make use of limitiations on the position of the match values
-			ipv6_addr_set(&pr->sip6, pr->sip, r[5 - i / 2],
-				      r[4 - i / 2], r[3 - i / 2]);
-			ipv6_addr_set(&pr->sip6_m, pr->sip_m, r[5 - i / 2],
-				      r[4 - i / 2], r[3 - i / 2]);
-		case TEMPLATE_FIELD_SIP3:
-		case TEMPLATE_FIELD_SIP4:
-		case TEMPLATE_FIELD_SIP5:
-		case TEMPLATE_FIELD_SIP6:
-		case TEMPLATE_FIELD_SIP7:
-			break;
-
-		case TEMPLATE_FIELD_DIP0:
-			pr->dip = data;
-			pr->dip_m = data_m;
-			break;
-		case TEMPLATE_FIELD_DIP1:
-			pr->dip = (pr->dip << 16) | data;
-			pr->dip_m = (pr->dip << 16) | data_m;
-			break;
-		case TEMPLATE_FIELD_DIP2:
-			pr->is_ipv6 = true;
-			ipv6_addr_set(&pr->dip6, pr->dip, r[5 - i / 2],
-				      r[4 - i / 2], r[3 - i / 2]);
-			ipv6_addr_set(&pr->dip6_m, pr->dip_m, r[5 - i / 2],
-				      r[4 - i / 2], r[3 - i / 2]);
-		case TEMPLATE_FIELD_DIP3:
-		case TEMPLATE_FIELD_DIP4:
-		case TEMPLATE_FIELD_DIP5:
-		case TEMPLATE_FIELD_DIP6:
-		case TEMPLATE_FIELD_DIP7:
-			break;
-		case TEMPLATE_FIELD_IP_TOS_PROTO:
-			pr->tos_proto = data;
-			pr->tos_proto_m = data_m;
-			break;
-		case TEMPLATE_FIELD_L4_SPORT:
-			pr->sport = data;
-			pr->sport_m = data_m;
-			break;
-		case TEMPLATE_FIELD_L4_DPORT:
-			pr->dport = data;
-			pr->dport_m = data_m;
-			break;
-		case TEMPLATE_FIELD_ICMP_IGMP:
-			pr->icmp_igmp = data;
-			pr->icmp_igmp_m = data_m;
-			break;
-		default:
-			pr_info("%s: unknown field %d\n", __func__, field_type);
-		}
-	}
-}
-
-static void rtl838x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr)
-{
-	pr->spmmask_fix = (r[6] >> 22) & 0x3;
-	pr->spn = (r[6] >> 16) & 0x3f;
-	pr->mgnt_vlan = (r[6] >> 15) & 1;
-	pr->dmac_hit_sw = (r[6] >> 14) & 1;
-	pr->not_first_frag = (r[6] >> 13) & 1;
-	pr->frame_type_l4 = (r[6] >> 10) & 7;
-	pr->frame_type = (r[6] >> 8) & 3;
-	pr->otag_fmt = (r[6] >> 7) & 1;
-	pr->itag_fmt = (r[6] >> 6) & 1;
-	pr->otag_exist = (r[6] >> 5) & 1;
-	pr->itag_exist = (r[6] >> 4) & 1;
-	pr->frame_type_l2 = (r[6] >> 2) & 3;
-	pr->tid = r[6] & 3;
-
-	pr->spmmask_fix_m = (r[13] >> 22) & 0x3;
-	pr->spn_m = (r[13] >> 16) & 0x3f;
-	pr->mgnt_vlan_m = (r[13] >> 15) & 1;
-	pr->dmac_hit_sw_m = (r[13] >> 14) & 1;
-	pr->not_first_frag_m = (r[13] >> 13) & 1;
-	pr->frame_type_l4_m = (r[13] >> 10) & 7;
-	pr->frame_type_m = (r[13] >> 8) & 3;
-	pr->otag_fmt_m = (r[13] >> 7) & 1;
-	pr->itag_fmt_m = (r[13] >> 6) & 1;
-	pr->otag_exist_m = (r[13] >> 5) & 1;
-	pr->itag_exist_m = (r[13] >> 4) & 1;
-	pr->frame_type_l2_m = (r[13] >> 2) & 3;
-	pr->tid_m = r[13] & 3;
-
-	pr->valid = r[14] & BIT(31);
-	pr->cond_not = r[14] & BIT(30);
-	pr->cond_and1 = r[14] & BIT(29);
-	pr->cond_and2 = r[14] & BIT(28);
-	pr->ivalid = r[14] & BIT(27);
-
-	pr->drop = (r[17] >> 14) & 3;
-	pr->fwd_sel = r[17] & BIT(13);
-	pr->ovid_sel = r[17] & BIT(12);
-	pr->ivid_sel = r[17] & BIT(11);
-	pr->flt_sel = r[17] & BIT(10);
-	pr->log_sel = r[17] & BIT(9);
-	pr->rmk_sel = r[17] & BIT(8);
-	pr->meter_sel = r[17] & BIT(7);
-	pr->tagst_sel = r[17] & BIT(6);
-	pr->mir_sel = r[17] & BIT(5);
-	pr->nopri_sel = r[17] & BIT(4);
-	pr->cpupri_sel = r[17] & BIT(3);
-	pr->otpid_sel = r[17] & BIT(2);
-	pr->itpid_sel = r[17] & BIT(1);
-	pr->shaper_sel = r[17] & BIT(0);
-}
-
-static void rtl838x_write_pie_fixed_fields(u32 r[],  struct pie_rule *pr)
-{
-	r[6] = ((u32) (pr->spmmask_fix & 0x3)) << 22;
-	r[6] |= ((u32) (pr->spn & 0x3f)) << 16;
-	r[6] |= pr->mgnt_vlan ? BIT(15) : 0;
-	r[6] |= pr->dmac_hit_sw ? BIT(14) : 0;
-	r[6] |= pr->not_first_frag ? BIT(13) : 0;
-	r[6] |= ((u32) (pr->frame_type_l4 & 0x7)) << 10;
-	r[6] |= ((u32) (pr->frame_type & 0x3)) << 8;
-	r[6] |= pr->otag_fmt ? BIT(7) : 0;
-	r[6] |= pr->itag_fmt ? BIT(6) : 0;
-	r[6] |= pr->otag_exist ? BIT(5) : 0;
-	r[6] |= pr->itag_exist ? BIT(4) : 0;
-	r[6] |= ((u32) (pr->frame_type_l2 & 0x3)) << 2;
-	r[6] |= ((u32) (pr->tid & 0x3));
-
-	r[13] = ((u32) (pr->spmmask_fix_m & 0x3)) << 22;
-	r[13] |= ((u32) (pr->spn_m & 0x3f)) << 16;
-	r[13] |= pr->mgnt_vlan_m ? BIT(15) : 0;
-	r[13] |= pr->dmac_hit_sw_m ? BIT(14) : 0;
-	r[13] |= pr->not_first_frag_m ? BIT(13) : 0;
-	r[13] |= ((u32) (pr->frame_type_l4_m & 0x7)) << 10;
-	r[13] |= ((u32) (pr->frame_type_m & 0x3)) << 8;
-	r[13] |= pr->otag_fmt_m ? BIT(7) : 0;
-	r[13] |= pr->itag_fmt_m ? BIT(6) : 0;
-	r[13] |= pr->otag_exist_m ? BIT(5) : 0;
-	r[13] |= pr->itag_exist_m ? BIT(4) : 0;
-	r[13] |= ((u32) (pr->frame_type_l2_m & 0x3)) << 2;
-	r[13] |= ((u32) (pr->tid_m & 0x3));
-
-	r[14] = pr->valid ? BIT(31) : 0;
-	r[14] |= pr->cond_not ? BIT(30) : 0;
-	r[14] |= pr->cond_and1 ? BIT(29) : 0;
-	r[14] |= pr->cond_and2 ? BIT(28) : 0;
-	r[14] |= pr->ivalid ? BIT(27) : 0;
-
-	if (pr->drop)
-		r[17] = 0x1 << 14;	// Standard drop action
-	else
-		r[17] = 0;
-	r[17] |= pr->fwd_sel ? BIT(13) : 0;
-	r[17] |= pr->ovid_sel ? BIT(12) : 0;
-	r[17] |= pr->ivid_sel ? BIT(11) : 0;
-	r[17] |= pr->flt_sel ? BIT(10) : 0;
-	r[17] |= pr->log_sel ? BIT(9) : 0;
-	r[17] |= pr->rmk_sel ? BIT(8) : 0;
-	r[17] |= pr->meter_sel ? BIT(7) : 0;
-	r[17] |= pr->tagst_sel ? BIT(6) : 0;
-	r[17] |= pr->mir_sel ? BIT(5) : 0;
-	r[17] |= pr->nopri_sel ? BIT(4) : 0;
-	r[17] |= pr->cpupri_sel ? BIT(3) : 0;
-	r[17] |= pr->otpid_sel ? BIT(2) : 0;
-	r[17] |= pr->itpid_sel ? BIT(1) : 0;
-	r[17] |= pr->shaper_sel ? BIT(0) : 0;
-}
-
-static int rtl838x_write_pie_action(u32 r[],  struct pie_rule *pr)
-{
-	u16 *aif = (u16 *)&r[17];
-	u16 data;
-	int fields_used = 0;
-
-	aif--;
-
-	pr_debug("%s, at %08x\n", __func__, (u32)aif);
-	/* Multiple actions can be linked to a match of a PIE rule,
-	 * they have different precedence depending on their type and this precedence
-	 * defines which Action Information Field (0-4) in the IACL table stores
-	 * the additional data of the action (like e.g. the port number a packet is
-	 * forwarded to) */
-	// TODO: count bits in selectors to limit to a maximum number of actions
-	if (pr->fwd_sel) { // Forwarding action
-		data = pr->fwd_act << 13;
-		data |= pr->fwd_data;
-		data |= pr->bypass_all ? BIT(12) : 0;
-		data |= pr->bypass_ibc_sc ? BIT(11) : 0;
-		data |= pr->bypass_igr_stp ? BIT(10) : 0;
-		*aif-- = data;
-		fields_used++;
-	}
-
-	if (pr->ovid_sel) { // Outer VID action
-		data = (pr->ovid_act & 0x3) << 12;
-		data |= pr->ovid_data;
-		*aif-- = data;
-		fields_used++;
-	}
-
-	if (pr->ivid_sel) { // Inner VID action
-		data = (pr->ivid_act & 0x3) << 12;
-		data |= pr->ivid_data;
-		*aif-- = data;
-		fields_used++;
-	}
-
-	if (pr->flt_sel) { // Filter action
-		*aif-- = pr->flt_data;
-		fields_used++;
-	}
-
-	if (pr->log_sel) { // Log action
-		if (fields_used >= 4)
-			return -1;
-		*aif-- = pr->log_data;
-		fields_used++;
-	}
-
-	if (pr->rmk_sel) { // Remark action
-		if (fields_used >= 4)
-			return -1;
-		*aif-- = pr->rmk_data;
-		fields_used++;
-	}
-
-	if (pr->meter_sel) { // Meter action
-		if (fields_used >= 4)
-			return -1;
-		*aif-- = pr->meter_data;
-		fields_used++;
-	}
-
-	if (pr->tagst_sel) { // Egress Tag Status action
-		if (fields_used >= 4)
-			return -1;
-		*aif-- = pr->tagst_data;
-		fields_used++;
-	}
-
-	if (pr->mir_sel) { // Mirror action
-		if (fields_used >= 4)
-			return -1;
-		*aif-- = pr->mir_data;
-		fields_used++;
-	}
-
-	if (pr->nopri_sel) { // Normal Priority action
-		if (fields_used >= 4)
-			return -1;
-		*aif-- = pr->nopri_data;
-		fields_used++;
-	}
-
-	if (pr->cpupri_sel) { // CPU Priority action
-		if (fields_used >= 4)
-			return -1;
-		*aif-- = pr->nopri_data;
-		fields_used++;
-	}
-
-	if (pr->otpid_sel) { // OTPID action
-		if (fields_used >= 4)
-			return -1;
-		*aif-- = pr->otpid_data;
-		fields_used++;
-	}
-
-	if (pr->itpid_sel) { // ITPID action
-		if (fields_used >= 4)
-			return -1;
-		*aif-- = pr->itpid_data;
-		fields_used++;
-	}
-
-	if (pr->shaper_sel) { // Traffic shaper action
-		if (fields_used >= 4)
-			return -1;
-		*aif-- = pr->shaper_data;
-		fields_used++;
-	}
-
-	return 0;
-}
-
-static void rtl838x_read_pie_action(u32 r[],  struct pie_rule *pr)
-{
-	u16 *aif = (u16 *)&r[17];
-
-	aif--;
-
-	pr_debug("%s, at %08x\n", __func__, (u32)aif);
-	if (pr->drop)
-		pr_debug("%s: Action Drop: %d", __func__, pr->drop);
-
-	if (pr->fwd_sel){ // Forwarding action
-		pr->fwd_act = *aif >> 13;
-		pr->fwd_data = *aif--;
-		pr->bypass_all = pr->fwd_data & BIT(12);
-		pr->bypass_ibc_sc = pr->fwd_data & BIT(11);
-		pr->bypass_igr_stp = pr->fwd_data & BIT(10);
-		if (pr->bypass_all || pr->bypass_ibc_sc || pr->bypass_igr_stp)
-			pr->bypass_sel = true;
-	}
-	if (pr->ovid_sel) // Outer VID action
-		pr->ovid_data = *aif--;
-	if (pr->ivid_sel) // Inner VID action
-		pr->ivid_data = *aif--;
-	if (pr->flt_sel) // Filter action
-		pr->flt_data = *aif--;
-	if (pr->log_sel) // Log action
-		pr->log_data = *aif--;
-	if (pr->rmk_sel) // Remark action
-		pr->rmk_data = *aif--;
-	if (pr->meter_sel) // Meter action
-		pr->meter_data = *aif--;
-	if (pr->tagst_sel) // Egress Tag Status action
-		pr->tagst_data = *aif--;
-	if (pr->mir_sel) // Mirror action
-		pr->mir_data = *aif--;
-	if (pr->nopri_sel) // Normal Priority action
-		pr->nopri_data = *aif--;
-	if (pr->cpupri_sel) // CPU Priority action
-		pr->nopri_data = *aif--;
-	if (pr->otpid_sel) // OTPID action
-		pr->otpid_data = *aif--;
-	if (pr->itpid_sel) // ITPID action
-		pr->itpid_data = *aif--;
-	if (pr->shaper_sel) // Traffic shaper action
-		pr->shaper_data = *aif--;
-}
-
-static void rtl838x_pie_rule_dump_raw(u32 r[])
-{
-	pr_info("Raw IACL table entry:\n");
-	pr_info("Match  : %08x %08x %08x %08x %08x %08x\n", r[0], r[1], r[2], r[3], r[4], r[5]);
-	pr_info("Fixed  : %08x\n", r[6]);
-	pr_info("Match M: %08x %08x %08x %08x %08x %08x\n", r[7], r[8], r[9], r[10], r[11], r[12]);
-	pr_info("Fixed M: %08x\n", r[13]);
-	pr_info("AIF    : %08x %08x %08x\n", r[14], r[15], r[16]);
-	pr_info("Sel    : %08x\n", r[17]);
-}
-
-static void rtl838x_pie_rule_dump(struct  pie_rule *pr)
-{
-	pr_info("Drop: %d, fwd: %d, ovid: %d, ivid: %d, flt: %d, log: %d, rmk: %d, meter: %d tagst: %d, mir: %d, nopri: %d, cpupri: %d, otpid: %d, itpid: %d, shape: %d\n",
-		pr->drop, pr->fwd_sel, pr->ovid_sel, pr->ivid_sel, pr->flt_sel, pr->log_sel, pr->rmk_sel, pr->log_sel, pr->tagst_sel, pr->mir_sel, pr->nopri_sel,
-		pr->cpupri_sel, pr->otpid_sel, pr->itpid_sel, pr->shaper_sel);
-	if (pr->fwd_sel)
-		pr_info("FWD: %08x\n", pr->fwd_data);
-	pr_info("TID: %x, %x\n", pr->tid, pr->tid_m);
-}
-
-static int rtl838x_pie_rule_read(struct rtl838x_switch_priv *priv, int idx, struct  pie_rule *pr)
-{
-	// Read IACL table (1) via register 0
-	struct table_reg *q = rtl_table_get(RTL8380_TBL_0, 1);
-	u32 r[18];
-	int i;
-	int block = idx / PIE_BLOCK_SIZE;
-	u32 t_select = sw_r32(RTL838X_ACL_BLK_TMPLTE_CTRL(block));
-
-	memset(pr, 0, sizeof(*pr));
-	rtl_table_read(q, idx);
-	for (i = 0; i < 18; i++)
-		r[i] = sw_r32(rtl_table_data(q, i));
-
-	rtl_table_release(q);
-
-	rtl838x_read_pie_fixed_fields(r, pr);
-	if (!pr->valid)
-		return 0;
-
-	pr_info("%s: template_selectors %08x, tid: %d\n", __func__, t_select, pr->tid);
-	rtl838x_pie_rule_dump_raw(r);
-
-	rtl838x_read_pie_templated(r, pr, fixed_templates[(t_select >> (pr->tid * 3)) & 0x7]);
-
-	rtl838x_read_pie_action(r, pr);
-
-	return 0;
-}
-
-static int rtl838x_pie_rule_write(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr)
-{
-	// Access IACL table (1) via register 0
-	struct table_reg *q = rtl_table_get(RTL8380_TBL_0, 1);
-	u32 r[18];
-	int i, err = 0;
-	int block = idx / PIE_BLOCK_SIZE;
-	u32 t_select = sw_r32(RTL838X_ACL_BLK_TMPLTE_CTRL(block));
-
-	pr_debug("%s: %d, t_select: %08x\n", __func__, idx, t_select);
-
-	for (i = 0; i < 18; i++)
-		r[i] = 0;
-
-	if (!pr->valid)
-		goto err_out;
-
-	rtl838x_write_pie_fixed_fields(r, pr);
-
-	pr_debug("%s: template %d\n", __func__, (t_select >> (pr->tid * 3)) & 0x7);
-	rtl838x_write_pie_templated(r, pr, fixed_templates[(t_select >> (pr->tid * 3)) & 0x7]);
-
-	if (rtl838x_write_pie_action(r, pr)) {
-		pr_err("Rule actions too complex\n");
-		goto err_out;
-	}
-
-//	rtl838x_pie_rule_dump_raw(r);
-
-	for (i = 0; i < 18; i++)
-		sw_w32(r[i], rtl_table_data(q, i));
-
-err_out:
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-
-	return err;
-}
-
-static bool rtl838x_pie_templ_has(int t, enum template_field_id field_type)
-{
-	int i;
-	enum template_field_id ft;
-
-	for (i = 0; i < N_FIXED_FIELDS; i++) {
-		ft = fixed_templates[t][i];
-		if (field_type == ft)
-			return true;
-	}
-
-	return false;
-}
-
-static int rtl838x_pie_verify_template(struct rtl838x_switch_priv *priv,
-				       struct pie_rule *pr, int t, int block)
-{
-	int i;
-
-	if (!pr->is_ipv6 && pr->sip_m && !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_SIP0))
-		return -1;
-
-	if (!pr->is_ipv6 && pr->dip_m && !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_DIP0))
-		return -1;
-
-	if (pr->is_ipv6) {
-		if ((pr->sip6_m.s6_addr32[0] || pr->sip6_m.s6_addr32[1]
-			|| pr->sip6_m.s6_addr32[2] || pr->sip6_m.s6_addr32[3])
-			&& !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_SIP2))
-			return -1;
-		if ((pr->dip6_m.s6_addr32[0] || pr->dip6_m.s6_addr32[1]
-			|| pr->dip6_m.s6_addr32[2] || pr->dip6_m.s6_addr32[3])
-			&& !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_DIP2))
-			return -1;
-	}
-
-	if (ether_addr_to_u64(pr->smac) && !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_SMAC0))
-		return -1;
-
-	if (ether_addr_to_u64(pr->dmac) && !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_DMAC0))
-		return -1;
-
-	// TODO: Check more
-
-	i = find_first_zero_bit(&priv->pie_use_bm[block * 4], PIE_BLOCK_SIZE);
-
-	if (i >= PIE_BLOCK_SIZE)
-		return -1;
-
-	return i + PIE_BLOCK_SIZE * block;
-}
-
-static int rtl838x_pie_rule_add(struct rtl838x_switch_priv *priv, struct pie_rule *pr)
-{
-	int idx, block, j, t;
-
-	pr_debug("In %s\n", __func__);
-
-	mutex_lock(&priv->pie_mutex);
-
-	for (block = 0; block < priv->n_pie_blocks; block++) {
-		for (j = 0; j < 3; j++) {
-			t = (sw_r32(RTL838X_ACL_BLK_TMPLTE_CTRL(block)) >> (j * 3)) & 0x7;
-			pr_debug("Testing block %d, template %d, template id %d\n", block, j, t);
-			idx = rtl838x_pie_verify_template(priv, pr, t, block);
-			if (idx >= 0)
-				break;
-		}
-		if (j < 3)
-			break;
-	}
-
-	if (block >= priv->n_pie_blocks) {
-		mutex_unlock(&priv->pie_mutex);
-		return -EOPNOTSUPP;
-	}
-
-	pr_debug("Using block: %d, index %d, template-id %d\n", block, idx, j);
-	set_bit(idx, priv->pie_use_bm);
-
-	pr->valid = true;
-	pr->tid = j;  // Mapped to template number
-	pr->tid_m = 0x3;
-	pr->id = idx;
-
-	rtl838x_pie_lookup_enable(priv, idx);
-	rtl838x_pie_rule_write(priv, idx, pr);
-
-	mutex_unlock(&priv->pie_mutex);
-	return 0;
-}
-
-static void rtl838x_pie_rule_rm(struct rtl838x_switch_priv *priv, struct pie_rule *pr)
-{
-	int idx = pr->id;
-
-	rtl838x_pie_rule_del(priv, idx, idx);
-	clear_bit(idx, priv->pie_use_bm);
-}
-
-/*
- * Initializes the Packet Inspection Engine:
- * powers it up, enables default matching templates for all blocks
- * and clears all rules possibly installed by u-boot
- */
-static void rtl838x_pie_init(struct rtl838x_switch_priv *priv)
-{
-	int i;
-	u32 template_selectors;
-
-	mutex_init(&priv->pie_mutex);
-
-	// Enable ACL lookup on all ports, including CPU_PORT
-	for (i = 0; i <= priv->cpu_port; i++)
-		sw_w32(1, RTL838X_ACL_PORT_LOOKUP_CTRL(i));
-
-	// Power on all PIE blocks
-	for (i = 0; i < priv->n_pie_blocks; i++)
-		sw_w32_mask(0, BIT(i), RTL838X_ACL_BLK_PWR_CTRL);
-
-	// Include IPG in metering
-	sw_w32(1, RTL838X_METER_GLB_CTRL);
-
-	// Delete all present rules
-	rtl838x_pie_rule_del(priv, 0, priv->n_pie_blocks * PIE_BLOCK_SIZE - 1);
-
-	// Routing bypasses source port filter: disable write-protection, first
-	sw_w32_mask(0, 3, RTL838X_INT_RW_CTRL);
-	sw_w32_mask(0, 1, RTL838X_DMY_REG27);
-	sw_w32_mask(3, 0, RTL838X_INT_RW_CTRL);
-
-	// Enable predefined templates 0, 1 and 2 for even blocks
-	template_selectors = 0 | (1 << 3) | (2 << 6);
-	for (i = 0; i < 6; i += 2)
-		sw_w32(template_selectors, RTL838X_ACL_BLK_TMPLTE_CTRL(i));
-
-	// Enable predefined templates 0, 3 and 4 (IPv6 support) for odd blocks
-	template_selectors = 0 | (3 << 3) | (4 << 6);
-	for (i = 1; i < priv->n_pie_blocks; i += 2)
-		sw_w32(template_selectors, RTL838X_ACL_BLK_TMPLTE_CTRL(i));
-
-	// Group each pair of physical blocks together to a logical block
-	sw_w32(0b10101010101, RTL838X_ACL_BLK_GROUP_CTRL);
-}
-
-static u32 rtl838x_packet_cntr_read(int counter)
-{
-	u32 v;
-
-	// Read LOG table (3) via register RTL8380_TBL_0
-	struct table_reg *r = rtl_table_get(RTL8380_TBL_0, 3);
-
-	pr_debug("In %s, id %d\n", __func__, counter);
-	rtl_table_read(r, counter / 2);
-
-	pr_debug("Registers: %08x %08x\n",
-		sw_r32(rtl_table_data(r, 0)), sw_r32(rtl_table_data(r, 1)));
-	// The table has a size of 2 registers
-	if (counter % 2)
-		v = sw_r32(rtl_table_data(r, 0));
-	else
-		v = sw_r32(rtl_table_data(r, 1));
-
-	rtl_table_release(r);
-
-	return v;
-}
-
-static void rtl838x_packet_cntr_clear(int counter)
-{
-	// Access LOG table (3) via register RTL8380_TBL_0
-	struct table_reg *r = rtl_table_get(RTL8380_TBL_0, 3);
-
-	pr_debug("In %s, id %d\n", __func__, counter);
-	// The table has a size of 2 registers
-	if (counter % 2)
-		sw_w32(0, rtl_table_data(r, 0));
-	else
-		sw_w32(0, rtl_table_data(r, 1));
-
-	rtl_table_write(r, counter / 2);
-
-	rtl_table_release(r);
-}
-
-static void rtl838x_route_read(int idx, struct rtl83xx_route *rt)
-{
-	// Read ROUTING table (2) via register RTL8380_TBL_1
-	struct table_reg *r = rtl_table_get(RTL8380_TBL_1, 2);
-
-	pr_debug("In %s, id %d\n", __func__, idx);
-	rtl_table_read(r, idx);
-
-	// The table has a size of 2 registers
-	rt->nh.gw = sw_r32(rtl_table_data(r, 0));
-	rt->nh.gw <<= 32;
-	rt->nh.gw |= sw_r32(rtl_table_data(r, 1));
-
-	rtl_table_release(r);
-}
-
-static void rtl838x_route_write(int idx, struct rtl83xx_route *rt)
-{
-	// Access ROUTING table (2) via register RTL8380_TBL_1
-	struct table_reg *r = rtl_table_get(RTL8380_TBL_1, 2);
-
-	pr_debug("In %s, id %d, gw: %016llx\n", __func__, idx, rt->nh.gw);
-	sw_w32(rt->nh.gw >> 32, rtl_table_data(r, 0));
-	sw_w32(rt->nh.gw, rtl_table_data(r, 1));
-	rtl_table_write(r, idx);
-
-	rtl_table_release(r);
-}
-
-static int rtl838x_l3_setup(struct rtl838x_switch_priv *priv)
-{
-	// Nothing to be done
-	return 0;
-}
-
-void rtl838x_vlan_port_keep_tag_set(int port, bool keep_outer, bool keep_inner)
-{
-	sw_w32(FIELD_PREP(RTL838X_VLAN_PORT_TAG_STS_CTRL_OTAG_STS_MASK,
-			  keep_outer ? RTL838X_VLAN_PORT_TAG_STS_TAGGED : RTL838X_VLAN_PORT_TAG_STS_UNTAG) |
-	       FIELD_PREP(RTL838X_VLAN_PORT_TAG_STS_CTRL_ITAG_STS_MASK,
-			  keep_inner ? RTL838X_VLAN_PORT_TAG_STS_TAGGED : RTL838X_VLAN_PORT_TAG_STS_UNTAG),
-	       RTL838X_VLAN_PORT_TAG_STS_CTRL(port));
-}
-
-void rtl838x_vlan_port_pvidmode_set(int port, enum pbvlan_type type, enum pbvlan_mode mode)
-{
-	if (type == PBVLAN_TYPE_INNER)
-		sw_w32_mask(0x3, mode, RTL838X_VLAN_PORT_PB_VLAN + (port << 2));
-	else
-		sw_w32_mask(0x3 << 14, mode << 14, RTL838X_VLAN_PORT_PB_VLAN + (port << 2));
-}
-
-void rtl838x_vlan_port_pvid_set(int port, enum pbvlan_type type, int pvid)
-{
-	if (type == PBVLAN_TYPE_INNER)
-		sw_w32_mask(0xfff << 2, pvid << 2, RTL838X_VLAN_PORT_PB_VLAN + (port << 2));
-	else
-		sw_w32_mask(0xfff << 16, pvid << 16, RTL838X_VLAN_PORT_PB_VLAN + (port << 2));
-}
-
-static int rtl838x_set_ageing_time(unsigned long msec)
-{
-	int t = sw_r32(RTL838X_L2_CTRL_1);
-
-	t &= 0x7FFFFF;
-	t = t * 128 / 625; /* Aging time in seconds. 0: L2 aging disabled */
-	pr_debug("L2 AGING time: %d sec\n", t);
-
-	t = (msec * 625 + 127000) / 128000;
-	t = t > 0x7FFFFF ? 0x7FFFFF : t;
-	sw_w32_mask(0x7FFFFF, t, RTL838X_L2_CTRL_1);
-	pr_debug("Dynamic aging for ports: %x\n", sw_r32(RTL838X_L2_PORT_AGING_OUT));
-
-	return 0;
-}
-
-static void rtl838x_set_igr_filter(int port, enum igr_filter state)
-{
-	sw_w32_mask(0x3 << ((port & 0xf)<<1), state << ((port & 0xf)<<1),
-		    RTL838X_VLAN_PORT_IGR_FLTR + (((port >> 4) << 2)));
-}
-
-static void rtl838x_set_egr_filter(int port, enum egr_filter state)
-{
-	sw_w32_mask(0x1 << (port % 0x1d), state << (port % 0x1d),
-		    RTL838X_VLAN_PORT_EGR_FLTR + (((port / 29) << 2)));
-}
-
-void rtl838x_set_distribution_algorithm(int group, int algoidx, u32 algomsk)
-{
-	algoidx &= 1; // RTL838X only supports 2 concurrent algorithms
-	sw_w32_mask(1 << (group % 8), algoidx << (group % 8),
-		    RTL838X_TRK_HASH_IDX_CTRL + ((group >> 3) << 2));
-	sw_w32(algomsk, RTL838X_TRK_HASH_CTRL + (algoidx << 2));
-}
-
-void rtl838x_set_receive_management_action(int port, rma_ctrl_t type, action_type_t action)
-{
-	switch(type) {
-	case BPDU:
-		sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1),
-			    RTL838X_RMA_BPDU_CTRL + ((port >> 4) << 2));
-	break;
-	case PTP:
-		sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1),
-			    RTL838X_RMA_PTP_CTRL + ((port >> 4) << 2));
-	break;
-	case LLTP:
-		sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1),
-			    RTL838X_RMA_LLTP_CTRL + ((port >> 4) << 2));
-	break;
-	default:
-	break;
-	}
-}
-
-const struct rtl838x_reg rtl838x_reg = {
-	.mask_port_reg_be = rtl838x_mask_port_reg,
-	.set_port_reg_be = rtl838x_set_port_reg,
-	.get_port_reg_be = rtl838x_get_port_reg,
-	.mask_port_reg_le = rtl838x_mask_port_reg,
-	.set_port_reg_le = rtl838x_set_port_reg,
-	.get_port_reg_le = rtl838x_get_port_reg,
-	.stat_port_rst = RTL838X_STAT_PORT_RST,
-	.stat_rst = RTL838X_STAT_RST,
-	.stat_port_std_mib = RTL838X_STAT_PORT_STD_MIB,
-	.port_iso_ctrl = rtl838x_port_iso_ctrl,
-	.traffic_enable = rtl838x_traffic_enable,
-	.traffic_disable = rtl838x_traffic_disable,
-	.traffic_get = rtl838x_traffic_get,
-	.traffic_set = rtl838x_traffic_set,
-	.l2_ctrl_0 = RTL838X_L2_CTRL_0,
-	.l2_ctrl_1 = RTL838X_L2_CTRL_1,
-	.l2_port_aging_out = RTL838X_L2_PORT_AGING_OUT,
-	.set_ageing_time = rtl838x_set_ageing_time,
-	.smi_poll_ctrl = RTL838X_SMI_POLL_CTRL,
-	.l2_tbl_flush_ctrl = RTL838X_L2_TBL_FLUSH_CTRL,
-	.exec_tbl0_cmd = rtl838x_exec_tbl0_cmd,
-	.exec_tbl1_cmd = rtl838x_exec_tbl1_cmd,
-	.tbl_access_data_0 = rtl838x_tbl_access_data_0,
-	.isr_glb_src = RTL838X_ISR_GLB_SRC,
-	.isr_port_link_sts_chg = RTL838X_ISR_PORT_LINK_STS_CHG,
-	.imr_port_link_sts_chg = RTL838X_IMR_PORT_LINK_STS_CHG,
-	.imr_glb = RTL838X_IMR_GLB,
-	.vlan_tables_read = rtl838x_vlan_tables_read,
-	.vlan_set_tagged = rtl838x_vlan_set_tagged,
-	.vlan_set_untagged = rtl838x_vlan_set_untagged,
-	.mac_force_mode_ctrl = rtl838x_mac_force_mode_ctrl,
-	.vlan_profile_dump = rtl838x_vlan_profile_dump,
-	.vlan_profile_setup = rtl838x_vlan_profile_setup,
-	.vlan_fwd_on_inner = rtl838x_vlan_fwd_on_inner,
-	.set_vlan_igr_filter = rtl838x_set_igr_filter,
-	.set_vlan_egr_filter = rtl838x_set_egr_filter,
-	.enable_learning = rtl838x_enable_learning,
-	.enable_flood = rtl838x_enable_flood,
-	.enable_mcast_flood = rtl838x_enable_mcast_flood,
-	.enable_bcast_flood = rtl838x_enable_bcast_flood,
-	.set_static_move_action = rtl838x_set_static_move_action,
-	.stp_get = rtl838x_stp_get,
-	.stp_set = rtl838x_stp_set,
-	.mac_port_ctrl = rtl838x_mac_port_ctrl,
-	.l2_port_new_salrn = rtl838x_l2_port_new_salrn,
-	.l2_port_new_sa_fwd = rtl838x_l2_port_new_sa_fwd,
-	.mir_ctrl = RTL838X_MIR_CTRL,
-	.mir_dpm = RTL838X_MIR_DPM_CTRL,
-	.mir_spm = RTL838X_MIR_SPM_CTRL,
-	.mac_link_sts = RTL838X_MAC_LINK_STS,
-	.mac_link_dup_sts = RTL838X_MAC_LINK_DUP_STS,
-	.mac_link_spd_sts = rtl838x_mac_link_spd_sts,
-	.mac_rx_pause_sts = RTL838X_MAC_RX_PAUSE_STS,
-	.mac_tx_pause_sts = RTL838X_MAC_TX_PAUSE_STS,
-	.read_l2_entry_using_hash = rtl838x_read_l2_entry_using_hash,
-	.write_l2_entry_using_hash = rtl838x_write_l2_entry_using_hash,
-	.read_cam = rtl838x_read_cam,
-	.write_cam = rtl838x_write_cam,
-	.vlan_port_keep_tag_set = rtl838x_vlan_port_keep_tag_set,
-	.vlan_port_pvidmode_set = rtl838x_vlan_port_pvidmode_set,
-	.vlan_port_pvid_set = rtl838x_vlan_port_pvid_set,
-	.trk_mbr_ctr = rtl838x_trk_mbr_ctr,
-	.rma_bpdu_fld_pmask = RTL838X_RMA_BPDU_FLD_PMSK,
-	.spcl_trap_eapol_ctrl = RTL838X_SPCL_TRAP_EAPOL_CTRL,
-	.init_eee = rtl838x_init_eee,
-	.port_eee_set = rtl838x_port_eee_set,
-	.eee_port_ability = rtl838x_eee_port_ability,
-	.l2_hash_seed = rtl838x_l2_hash_seed, 
-	.l2_hash_key = rtl838x_l2_hash_key,
-	.read_mcast_pmask = rtl838x_read_mcast_pmask,
-	.write_mcast_pmask = rtl838x_write_mcast_pmask,
-	.pie_init = rtl838x_pie_init,
-	.pie_rule_read = rtl838x_pie_rule_read,
-	.pie_rule_write = rtl838x_pie_rule_write,
-	.pie_rule_add = rtl838x_pie_rule_add,
-	.pie_rule_rm = rtl838x_pie_rule_rm,
-	.l2_learning_setup = rtl838x_l2_learning_setup,
-	.packet_cntr_read = rtl838x_packet_cntr_read,
-	.packet_cntr_clear = rtl838x_packet_cntr_clear,
-	.route_read = rtl838x_route_read,
-	.route_write = rtl838x_route_write,
-	.l3_setup = rtl838x_l3_setup,
-	.set_distribution_algorithm = rtl838x_set_distribution_algorithm,
-	.set_receive_management_action = rtl838x_set_receive_management_action,
-};
-
-irqreturn_t rtl838x_switch_irq(int irq, void *dev_id)
-{
-	struct dsa_switch *ds = dev_id;
-	u32 status = sw_r32(RTL838X_ISR_GLB_SRC);
-	u32 ports = sw_r32(RTL838X_ISR_PORT_LINK_STS_CHG);
-	u32 link;
-	int i;
-
-	/* Clear status */
-	sw_w32(ports, RTL838X_ISR_PORT_LINK_STS_CHG);
-	pr_info("RTL8380 Link change: status: %x, ports %x\n", status, ports);
-
-	for (i = 0; i < 28; i++) {
-		if (ports & BIT(i)) {
-			link = sw_r32(RTL838X_MAC_LINK_STS);
-			if (link & BIT(i))
-				dsa_port_phylink_mac_change(ds, i, true);
-			else
-				dsa_port_phylink_mac_change(ds, i, false);
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-int rtl838x_smi_wait_op(int timeout)
-{
-	int ret = 0;
-	u32 val;
-
-	ret = readx_poll_timeout(sw_r32, RTL838X_SMI_ACCESS_PHY_CTRL_1,
-				 val, !(val & 0x1), 20, timeout);
-	if (ret)
-		pr_err("%s: timeout\n", __func__);
-
-	return ret;
-}
-
-/*
- * Reads a register in a page from the PHY
- */
-int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val)
-{
-	u32 v;
-	u32 park_page;
-
-	if (port > 31) {
-		*val = 0xffff;
-		return 0;
-	}
-
-	if (page > 4095 || reg > 31)
-		return -ENOTSUPP;
-
-	mutex_lock(&smi_lock);
-
-	if (rtl838x_smi_wait_op(100000))
-		goto timeout;
-
-	sw_w32_mask(0xffff0000, port << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2);
-
-	park_page = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_1) & ((0x1f << 15) | 0x2);
-	v = reg << 20 | page << 3;
-	sw_w32(v | park_page, RTL838X_SMI_ACCESS_PHY_CTRL_1);
-	sw_w32_mask(0, 1, RTL838X_SMI_ACCESS_PHY_CTRL_1);
-
-	if (rtl838x_smi_wait_op(100000))
-		goto timeout;
-
-	*val = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_2) & 0xffff;
-
-	mutex_unlock(&smi_lock);
-	return 0;
-
-timeout:
-	mutex_unlock(&smi_lock);
-	return -ETIMEDOUT;
-}
-
-/*
- * Write to a register in a page of the PHY
- */
-int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val)
-{
-	u32 v;
-	u32 park_page;
-
-	val &= 0xffff;
-	if (port > 31 || page > 4095 || reg > 31)
-		return -ENOTSUPP;
-
-	mutex_lock(&smi_lock);
-	if (rtl838x_smi_wait_op(100000))
-		goto timeout;
-
-	sw_w32(BIT(port), RTL838X_SMI_ACCESS_PHY_CTRL_0);
-	mdelay(10);
-
-	sw_w32_mask(0xffff0000, val << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2);
-
-	park_page = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_1) & ((0x1f << 15) | 0x2);
-	v = reg << 20 | page << 3 | 0x4;
-	sw_w32(v | park_page, RTL838X_SMI_ACCESS_PHY_CTRL_1);
-	sw_w32_mask(0, 1, RTL838X_SMI_ACCESS_PHY_CTRL_1);
-
-	if (rtl838x_smi_wait_op(100000))
-		goto timeout;
-
-	mutex_unlock(&smi_lock);
-	return 0;
-
-timeout:
-	mutex_unlock(&smi_lock);
-	return -ETIMEDOUT;
-}
-
-/*
- * Read an mmd register of a PHY
- */
-int rtl838x_read_mmd_phy(u32 port, u32 addr, u32 reg, u32 *val)
-{
-	u32 v;
-
-	mutex_lock(&smi_lock);
-
-	if (rtl838x_smi_wait_op(100000))
-		goto timeout;
-
-	sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0);
-	mdelay(10);
-
-	sw_w32_mask(0xffff0000, port << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2);
-
-	v = addr << 16 | reg;
-	sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_3);
-
-	/* mmd-access | read | cmd-start */
-	v = 1 << 1 | 0 << 2 | 1;
-	sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_1);
-
-	if (rtl838x_smi_wait_op(100000))
-		goto timeout;
-
-	*val = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_2) & 0xffff;
-
-	mutex_unlock(&smi_lock);
-	return 0;
-
-timeout:
-	mutex_unlock(&smi_lock);
-	return -ETIMEDOUT;
-}
-
-/*
- * Write to an mmd register of a PHY
- */
-int rtl838x_write_mmd_phy(u32 port, u32 addr, u32 reg, u32 val)
-{
-	u32 v;
-
-	pr_debug("MMD write: port %d, dev %d, reg %d, val %x\n", port, addr, reg, val);
-	val &= 0xffff;
-	mutex_lock(&smi_lock);
-
-	if (rtl838x_smi_wait_op(100000))
-		goto timeout;
-
-	sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0);
-	mdelay(10);
-
-	sw_w32_mask(0xffff0000, val << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2);
-
-	sw_w32_mask(0x1f << 16, addr << 16, RTL838X_SMI_ACCESS_PHY_CTRL_3);
-	sw_w32_mask(0xffff, reg, RTL838X_SMI_ACCESS_PHY_CTRL_3);
-	/* mmd-access | write | cmd-start */
-	v = 1 << 1 | 1 << 2 | 1;
-	sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_1);
-
-	if (rtl838x_smi_wait_op(100000))
-		goto timeout;
-
-	mutex_unlock(&smi_lock);
-	return 0;
-
-timeout:
-	mutex_unlock(&smi_lock);
-	return -ETIMEDOUT;
-}
-
-void rtl8380_get_version(struct rtl838x_switch_priv *priv)
-{
-	u32 rw_save, info_save;
-	u32 info;
-
-	rw_save = sw_r32(RTL838X_INT_RW_CTRL);
-	sw_w32(rw_save | 0x3, RTL838X_INT_RW_CTRL);
-
-	info_save = sw_r32(RTL838X_CHIP_INFO);
-	sw_w32(info_save | 0xA0000000, RTL838X_CHIP_INFO);
-
-	info = sw_r32(RTL838X_CHIP_INFO);
-	sw_w32(info_save, RTL838X_CHIP_INFO);
-	sw_w32(rw_save, RTL838X_INT_RW_CTRL);
-
-	if ((info & 0xFFFF) == 0x6275) {
-		if (((info >> 16) & 0x1F) == 0x1)
-			priv->version = RTL8380_VERSION_A;
-		else if (((info >> 16) & 0x1F) == 0x2)
-			priv->version = RTL8380_VERSION_B;
-		else
-			priv->version = RTL8380_VERSION_B;
-	} else {
-		priv->version = '-';
-	}
-}
-
-void rtl838x_vlan_profile_dump(int profile)
-{
-	u32 p;
-
-	if (profile < 0 || profile > 7)
-		return;
-
-	p = sw_r32(RTL838X_VLAN_PROFILE(profile));
-
-	pr_info("VLAN profile %d: L2 learning: %d, UNKN L2MC FLD PMSK %d, \
-		UNKN IPMC FLD PMSK %d, UNKN IPv6MC FLD PMSK: %d",
-		profile, p & 1, (p >> 1) & 0x1ff, (p >> 10) & 0x1ff, (p >> 19) & 0x1ff);
-}
-
-void rtl8380_sds_rst(int mac)
-{
-	u32 offset = (mac == 24) ? 0 : 0x100;
-
-	sw_w32_mask(1 << 11, 0, RTL838X_SDS4_FIB_REG0 + offset);
-	sw_w32_mask(0x3, 0, RTL838X_SDS4_REG28 + offset);
-	sw_w32_mask(0x3, 0x3, RTL838X_SDS4_REG28 + offset);
-	sw_w32_mask(0, 0x1 << 6, RTL838X_SDS4_DUMMY0 + offset);
-	sw_w32_mask(0x1 << 6, 0, RTL838X_SDS4_DUMMY0 + offset);
-	pr_debug("SERDES reset: %d\n", mac);
-}
-
-int rtl8380_sds_power(int mac, int val)
-{
-	u32 mode = (val == 1) ? 0x4 : 0x9;
-	u32 offset = (mac == 24) ? 5 : 0;
-
-	if ((mac != 24) && (mac != 26)) {
-		pr_err("%s: not a fibre port: %d\n", __func__, mac);
-		return -1;
-	}
-
-	sw_w32_mask(0x1f << offset, mode << offset, RTL838X_SDS_MODE_SEL);
-
-	rtl8380_sds_rst(mac);
-
-	return 0;
-}
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h
deleted file mode 100644
index 81656799a7f1..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h
+++ /dev/null
@@ -1,1106 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef _RTL838X_H
-#define _RTL838X_H
-
-#include <net/dsa.h>
-
-/*
- * Register definition
- */
-#define RTL838X_MAC_PORT_CTRL(port)		(0xd560 + (((port) << 7)))
-#define RTL839X_MAC_PORT_CTRL(port)		(0x8004 + (((port) << 7)))
-#define RTL930X_MAC_PORT_CTRL(port)		(0x3260 + (((port) << 6)))
-#define RTL931X_MAC_PORT_CTRL			(0x6004)
-
-#define RTL930X_MAC_L2_PORT_CTRL(port)		(0x3268 + (((port) << 6)))
-#define RTL931X_MAC_L2_PORT_CTRL		(0x6000)
-
-#define RTL838X_RST_GLB_CTRL_0			(0x003c)
-
-#define RTL838X_MAC_FORCE_MODE_CTRL		(0xa104)
-#define RTL839X_MAC_FORCE_MODE_CTRL		(0x02bc)
-#define RTL930X_MAC_FORCE_MODE_CTRL		(0xCA1C)
-#define RTL931X_MAC_FORCE_MODE_CTRL		(0x0DCC)
-
-#define RTL838X_DMY_REG31			(0x3b28)
-#define RTL838X_SDS_MODE_SEL			(0x0028)
-#define RTL838X_SDS_CFG_REG			(0x0034)
-#define RTL838X_INT_MODE_CTRL			(0x005c)
-#define RTL838X_CHIP_INFO			(0x00d8)
-#define RTL839X_CHIP_INFO			(0x0ff4)
-#define RTL838X_PORT_ISO_CTRL(port)		(0x4100 + ((port) << 2))
-#define RTL839X_PORT_ISO_CTRL(port)		(0x1400 + ((port) << 3))
-
-/* Packet statistics */
-#define RTL838X_STAT_PORT_STD_MIB		(0x1200)
-#define RTL839X_STAT_PORT_STD_MIB		(0xC000)
-#define RTL930X_STAT_PORT_MIB_CNTR		(0x0664)
-#define RTL838X_STAT_RST			(0x3100)
-#define RTL839X_STAT_RST			(0xF504)
-#define RTL930X_STAT_RST			(0x3240)
-#define RTL931X_STAT_RST			(0x7ef4)
-#define RTL838X_STAT_PORT_RST			(0x3104)
-#define RTL839X_STAT_PORT_RST			(0xF508)
-#define RTL930X_STAT_PORT_RST			(0x3244)
-#define RTL931X_STAT_PORT_RST			(0x7ef8)
-#define RTL838X_STAT_CTRL			(0x3108)
-#define RTL839X_STAT_CTRL			(0x04cc)
-#define RTL930X_STAT_CTRL			(0x3248)
-#define RTL931X_STAT_CTRL			(0x5720)
-
-/* Registers of the internal Serdes of the 8390 */
-#define RTL8390_SDS0_1_XSG0			(0xA000)
-#define RTL8390_SDS0_1_XSG1			(0xA100)
-#define RTL839X_SDS12_13_XSG0			(0xB800)
-#define RTL839X_SDS12_13_XSG1			(0xB900)
-#define RTL839X_SDS12_13_PWR0			(0xb880)
-#define RTL839X_SDS12_13_PWR1			(0xb980)
-
-/* Registers of the internal Serdes of the 8380 */
-#define RTL838X_SDS4_FIB_REG0			(0xF800)
-#define RTL838X_SDS4_REG28			(0xef80)
-#define RTL838X_SDS4_DUMMY0			(0xef8c)
-#define RTL838X_SDS5_EXT_REG6			(0xf18c)
-
-/* VLAN registers */
-#define RTL838X_VLAN_CTRL			(0x3A74)
-#define RTL838X_VLAN_PROFILE(idx)		(0x3A88 + ((idx) << 2))
-#define RTL838X_VLAN_PORT_EGR_FLTR		(0x3A84)
-#define RTL838X_VLAN_PORT_PB_VLAN		(0x3C00)
-#define RTL838X_VLAN_PORT_IGR_FLTR		(0x3A7C)
-
-#define RTL839X_VLAN_PROFILE(idx)		(0x25C0 + (((idx) << 3)))
-#define RTL839X_VLAN_CTRL			(0x26D4)
-#define RTL839X_VLAN_PORT_PB_VLAN		(0x26D8)
-#define RTL839X_VLAN_PORT_IGR_FLTR		(0x27B4)
-#define RTL839X_VLAN_PORT_EGR_FLTR		(0x27C4)
-
-#define RTL930X_VLAN_PROFILE_SET(idx)		(0x9c60 + (((idx) * 20)))
-#define RTL930X_VLAN_CTRL			(0x82D4)
-#define RTL930X_VLAN_PORT_PB_VLAN		(0x82D8)
-#define RTL930X_VLAN_PORT_IGR_FLTR		(0x83C0)
-#define RTL930X_VLAN_PORT_EGR_FLTR		(0x83C8)
-
-#define RTL931X_VLAN_PROFILE_SET(idx)		(0x9800 + (((idx) * 28)))
-#define RTL931X_VLAN_CTRL			(0x94E4)
-#define RTL931X_VLAN_PORT_IGR_CTRL		(0x94E8)
-#define RTL931X_VLAN_PORT_IGR_FLTR		(0x96B4)
-#define RTL931X_VLAN_PORT_EGR_FLTR		(0x96C4)
-
-/* Table access registers */
-#define RTL838X_TBL_ACCESS_CTRL_0		(0x6914)
-#define RTL838X_TBL_ACCESS_DATA_0(idx)		(0x6918 + ((idx) << 2))
-#define RTL838X_TBL_ACCESS_CTRL_1		(0xA4C8)
-#define RTL838X_TBL_ACCESS_DATA_1(idx)		(0xA4CC + ((idx) << 2))
-
-#define RTL839X_TBL_ACCESS_CTRL_0		(0x1190)
-#define RTL839X_TBL_ACCESS_DATA_0(idx)		(0x1194 + ((idx) << 2))
-#define RTL839X_TBL_ACCESS_CTRL_1		(0x6b80)
-#define RTL839X_TBL_ACCESS_DATA_1(idx)		(0x6b84 + ((idx) << 2))
-#define RTL839X_TBL_ACCESS_CTRL_2		(0x611C)
-#define RTL839X_TBL_ACCESS_DATA_2(i)		(0x6120 + (((i) << 2)))
-
-#define RTL930X_TBL_ACCESS_CTRL_0		(0xB340)
-#define RTL930X_TBL_ACCESS_DATA_0(idx)		(0xB344 + ((idx) << 2))
-#define RTL930X_TBL_ACCESS_CTRL_1		(0xB3A0)
-#define RTL930X_TBL_ACCESS_DATA_1(idx)		(0xB3A4 + ((idx) << 2))
-#define RTL930X_TBL_ACCESS_CTRL_2		(0xCE04)
-#define RTL930X_TBL_ACCESS_DATA_2(i)		(0xCE08 + (((i) << 2)))
-
-#define RTL931X_TBL_ACCESS_CTRL_0		(0x8500)
-#define RTL931X_TBL_ACCESS_DATA_0(idx)		(0x8508 + ((idx) << 2))
-#define RTL931X_TBL_ACCESS_CTRL_1		(0x40C0)
-#define RTL931X_TBL_ACCESS_DATA_1(idx)		(0x40C4 + ((idx) << 2))
-#define RTL931X_TBL_ACCESS_CTRL_2		(0x8528)
-#define RTL931X_TBL_ACCESS_DATA_2(i)		(0x852C + (((i) << 2)))
-#define RTL931X_TBL_ACCESS_CTRL_3		(0x0200)
-#define RTL931X_TBL_ACCESS_DATA_3(i)		(0x0204 + (((i) << 2)))
-#define RTL931X_TBL_ACCESS_CTRL_4		(0x20DC)
-#define RTL931X_TBL_ACCESS_DATA_4(i)		(0x20E0 + (((i) << 2)))
-#define RTL931X_TBL_ACCESS_CTRL_5		(0x7E1C)
-#define RTL931X_TBL_ACCESS_DATA_5(i)		(0x7E20 + (((i) << 2)))
-
-/* MAC handling */
-#define RTL838X_MAC_LINK_STS			(0xa188)
-#define RTL839X_MAC_LINK_STS			(0x0390)
-#define RTL930X_MAC_LINK_STS			(0xCB10)
-#define RTL931X_MAC_LINK_STS			(0x0EC0)
-#define RTL838X_MAC_LINK_SPD_STS(p)		(0xa190 + (((p >> 4) << 2)))
-#define RTL839X_MAC_LINK_SPD_STS(p)		(0x03a0 + (((p >> 4) << 2)))
-#define RTL930X_MAC_LINK_SPD_STS(p)		(0xCB18 + (((p >> 3) << 2)))
-#define RTL931X_MAC_LINK_SPD_STS		(0x0ED0)
-#define RTL838X_MAC_LINK_DUP_STS		(0xa19c)
-#define RTL839X_MAC_LINK_DUP_STS		(0x03b0)
-#define RTL930X_MAC_LINK_DUP_STS		(0xCB28)
-#define RTL931X_MAC_LINK_DUP_STS		(0x0EF0)
-#define RTL838X_MAC_TX_PAUSE_STS		(0xa1a0)
-#define RTL839X_MAC_TX_PAUSE_STS		(0x03b8)
-#define RTL930X_MAC_TX_PAUSE_STS		(0xCB2C)
-#define RTL931X_MAC_TX_PAUSE_STS		(0x0EF8)
-#define RTL838X_MAC_RX_PAUSE_STS		(0xa1a4)
-#define RTL839X_MAC_RX_PAUSE_STS		(0x03c0)
-#define RTL930X_MAC_RX_PAUSE_STS		(0xCB30)
-#define RTL931X_MAC_RX_PAUSE_STS		(0x0F00)
-#define RTL930X_MAC_LINK_MEDIA_STS		(0xCB14)
-#define RTL931X_MAC_LINK_MEDIA_STS		(0x0EC8)
-
-/* MAC link state bits */
-#define RTL838X_FORCE_EN			(1 << 0)
-#define RTL838X_FORCE_LINK_EN			(1 << 1)
-#define RTL838X_NWAY_EN				(1 << 2)
-#define RTL838X_DUPLEX_MODE			(1 << 3)
-#define RTL838X_TX_PAUSE_EN			(1 << 6)
-#define RTL838X_RX_PAUSE_EN			(1 << 7)
-#define RTL838X_MAC_FORCE_FC_EN			(1 << 8)
-
-#define RTL839X_FORCE_EN			(1 << 0)
-#define RTL839X_FORCE_LINK_EN			(1 << 1)
-#define RTL839X_DUPLEX_MODE			(1 << 2)
-#define RTL839X_TX_PAUSE_EN			(1 << 5)
-#define RTL839X_RX_PAUSE_EN			(1 << 6)
-#define RTL839X_MAC_FORCE_FC_EN			(1 << 7)
-
-#define RTL930X_FORCE_EN			(1 << 0)
-#define RTL930X_FORCE_LINK_EN			(1 << 1)
-#define RTL930X_DUPLEX_MODE			(1 << 2)
-#define RTL930X_TX_PAUSE_EN			(1 << 7)
-#define RTL930X_RX_PAUSE_EN			(1 << 8)
-#define RTL930X_MAC_FORCE_FC_EN			(1 << 9)
-
-#define RTL931X_FORCE_EN			(1 << 9)
-#define RTL931X_FORCE_LINK_EN			(1 << 0)
-#define RTL931X_DUPLEX_MODE			(1 << 2)
-#define RTL931X_MAC_FORCE_FC_EN			(1 << 4)
-#define RTL931X_TX_PAUSE_EN			(1 << 16)
-#define RTL931X_RX_PAUSE_EN			(1 << 17)
-
-/* EEE */
-#define RTL838X_MAC_EEE_ABLTY			(0xa1a8)
-#define RTL838X_EEE_PORT_TX_EN			(0x014c)
-#define RTL838X_EEE_PORT_RX_EN			(0x0150)
-#define RTL838X_EEE_CLK_STOP_CTRL		(0x0148)
-#define RTL838X_EEE_TX_TIMER_GIGA_CTRL		(0xaa04)
-#define RTL838X_EEE_TX_TIMER_GELITE_CTRL	(0xaa08)
-
-#define RTL839X_EEE_TX_TIMER_GELITE_CTRL	(0x042C)
-#define RTL839X_EEE_TX_TIMER_GIGA_CTRL		(0x0430)
-#define RTL839X_EEE_TX_TIMER_10G_CTRL		(0x0434)
-#define RTL839X_EEE_CTRL(p)			(0x8008 + ((p) << 7))
-#define RTL839X_MAC_EEE_ABLTY			(0x03C8)
-
-#define RTL930X_MAC_EEE_ABLTY			(0xCB34)
-#define RTL930X_EEE_CTRL(p)			(0x3274 + ((p) << 6))
-#define RTL930X_EEEP_PORT_CTRL(p)		(0x3278 + ((p) << 6))
-
-/* L2 functionality */
-#define RTL838X_L2_CTRL_0			(0x3200)
-#define RTL839X_L2_CTRL_0			(0x3800)
-#define RTL930X_L2_CTRL				(0x8FD8)
-#define RTL931X_L2_CTRL				(0xC800)
-#define RTL838X_L2_CTRL_1			(0x3204)
-#define RTL839X_L2_CTRL_1			(0x3804)
-#define RTL930X_L2_AGE_CTRL			(0x8FDC)
-#define RTL931X_L2_AGE_CTRL			(0xC804)
-#define RTL838X_L2_PORT_AGING_OUT		(0x3358)
-#define RTL839X_L2_PORT_AGING_OUT		(0x3b74)
-#define	RTL930X_L2_PORT_AGE_CTRL		(0x8FE0)
-#define	RTL931X_L2_PORT_AGE_CTRL		(0xc808)
-#define RTL838X_TBL_ACCESS_L2_CTRL		(0x6900)
-#define RTL839X_TBL_ACCESS_L2_CTRL		(0x1180)
-#define RTL930X_TBL_ACCESS_L2_CTRL		(0xB320)
-#define RTL930X_TBL_ACCESS_L2_METHOD_CTRL	(0xB324)
-#define RTL838X_TBL_ACCESS_L2_DATA(idx)		(0x6908 + ((idx) << 2))
-#define RTL839X_TBL_ACCESS_L2_DATA(idx)		(0x1184 + ((idx) << 2))
-#define RTL930X_TBL_ACCESS_L2_DATA(idx)		(0xab08 + ((idx) << 2))
-
-#define RTL838X_L2_TBL_FLUSH_CTRL		(0x3370)
-#define RTL839X_L2_TBL_FLUSH_CTRL		(0x3ba0)
-#define RTL930X_L2_TBL_FLUSH_CTRL		(0x9404)
-#define RTL931X_L2_TBL_FLUSH_CTRL		(0xCD9C)
-
-#define RTL838X_L2_LRN_CONSTRT			(0x329C)
-#define RTL839X_L2_LRN_CONSTRT			(0x3910)
-#define RTL930X_L2_LRN_CONSTRT_CTRL		(0x909c)
-#define RTL931X_L2_LRN_CONSTRT_CTRL		(0xC964)
-
-#define RTL838X_L2_FLD_PMSK			(0x3288)
-#define RTL839X_L2_FLD_PMSK			(0x38EC)
-#define RTL930X_L2_BC_FLD_PMSK			(0x9068)
-#define RTL931X_L2_BC_FLD_PMSK			(0xC8FC)
-
-#define RTL930X_L2_UNKN_UC_FLD_PMSK		(0x9064)
-#define RTL931X_L2_UNKN_UC_FLD_PMSK		(0xC8F4)
-
-#define RTL838X_L2_LRN_CONSTRT_EN		(0x3368)
-#define RTL838X_L2_PORT_LRN_CONSTRT		(0x32A0)
-#define RTL839X_L2_PORT_LRN_CONSTRT		(0x3914)
-
-#define RTL838X_L2_PORT_NEW_SALRN(p)		(0x328c + (((p >> 4) << 2)))
-#define RTL839X_L2_PORT_NEW_SALRN(p)		(0x38F0 + (((p >> 4) << 2)))
-#define RTL930X_L2_PORT_SALRN(p)		(0x8FEC + (((p >> 4) << 2)))
-#define RTL931X_L2_PORT_NEW_SALRN(p)		(0xC820 + (((p >> 4) << 2)))
-
-#define SALRN_PORT_SHIFT(p)			((p % 16) * 2)
-#define SALRN_MODE_MASK				0x3
-#define SALRN_MODE_HARDWARE			0
-#define SALRN_MODE_DISABLED			2
-
-#define RTL838X_L2_PORT_NEW_SA_FWD(p)		(0x3294 + (((p >> 4) << 2)))
-#define RTL839X_L2_PORT_NEW_SA_FWD(p)		(0x3900 + (((p >> 4) << 2)))
-#define RTL930X_L2_PORT_NEW_SA_FWD(p)		(0x8FF4 + (((p / 10) << 2)))
-#define RTL931X_L2_PORT_NEW_SA_FWD(p)		(0xC830 + (((p / 10) << 2)))
-
-#define RTL838X_L2_PORT_MV_ACT(p)		(0x335c + (((p >> 4) << 2)))
-#define RTL839X_L2_PORT_MV_ACT(p)		(0x3b80 + (((p >> 4) << 2)))
-
-#define RTL838X_L2_PORT_STATIC_MV_ACT(p)	(0x327c + (((p >> 4) << 2)))
-#define RTL839X_L2_PORT_STATIC_MV_ACT(p)	(0x38dc + (((p >> 4) << 2)))
-
-#define MV_ACT_PORT_SHIFT(p)			((p % 16) * 2)
-#define MV_ACT_MASK				0x3
-#define MV_ACT_FORWARD				0
-#define MV_ACT_DROP				1
-#define MV_ACT_TRAP2CPU				2
-#define MV_ACT_COPY2CPU				3
-
-#define RTL930X_ST_CTRL				(0x8798)
-
-#define RTL930X_L2_PORT_SABLK_CTRL		(0x905c)
-#define RTL930X_L2_PORT_DABLK_CTRL		(0x9060)
-
-#define RTL838X_L2_PORT_LM_ACT(p)		(0x3208 + ((p) << 2))
-#define RTL838X_VLAN_PORT_FWD			(0x3A78)
-#define RTL839X_VLAN_PORT_FWD			(0x27AC)
-#define RTL930X_VLAN_PORT_FWD			(0x834C)
-#define RTL931X_VLAN_PORT_FWD			(0x95CC)
-#define RTL838X_VLAN_FID_CTRL			(0x3aa8)
-
-/* Port Mirroring */
-#define RTL838X_MIR_CTRL			(0x5D00)
-#define RTL838X_MIR_DPM_CTRL			(0x5D20)
-#define RTL838X_MIR_SPM_CTRL			(0x5D10)
-
-#define RTL839X_MIR_CTRL			(0x2500)
-#define RTL839X_MIR_DPM_CTRL			(0x2530)
-#define RTL839X_MIR_SPM_CTRL			(0x2510)
-
-#define RTL930X_MIR_CTRL			(0xA2A0)
-#define RTL930X_MIR_DPM_CTRL			(0xA2C0)
-#define RTL930X_MIR_SPM_CTRL			(0xA2B0)
-
-#define RTL931X_MIR_CTRL			(0xAF00)
-#define RTL931X_MIR_DPM_CTRL			(0xAF30)
-#define RTL931X_MIR_SPM_CTRL			(0xAF10)
-
-/* Storm/rate control and scheduling */
-#define RTL838X_STORM_CTRL			(0x4700)
-#define RTL839X_STORM_CTRL			(0x1800)
-#define RTL838X_STORM_CTRL_LB_CTRL(p)		(0x4884 + (((p) << 2)))
-#define RTL838X_STORM_CTRL_BURST_PPS_0		(0x4874)
-#define RTL838X_STORM_CTRL_BURST_PPS_1		(0x4878)
-#define RTL838X_STORM_CTRL_BURST_0		(0x487c)
-#define RTL838X_STORM_CTRL_BURST_1		(0x4880)
-#define RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_0	(0x1804)
-#define RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_1	(0x1808)
-#define RTL838X_SCHED_CTRL			(0xB980)
-#define RTL839X_SCHED_CTRL			(0x60F4)
-#define RTL838X_SCHED_LB_TICK_TKN_CTRL_0	(0xAD58)
-#define RTL838X_SCHED_LB_TICK_TKN_CTRL_1	(0xAD5C)
-#define RTL839X_SCHED_LB_TICK_TKN_CTRL_0	(0x1804)
-#define RTL839X_SCHED_LB_TICK_TKN_CTRL_1	(0x1808)
-#define RTL839X_STORM_CTRL_SPCL_LB_TICK_TKN_CTRL (0x2000)
-#define RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_0	(0x1604)
-#define RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_1	(0x1608)
-#define RTL839X_SCHED_LB_TICK_TKN_CTRL		(0x60F8)
-#define RTL839X_SCHED_LB_TICK_TKN_PPS_CTRL	(0x6200)
-#define RTL838X_SCHED_LB_THR			(0xB984)
-#define RTL839X_SCHED_LB_THR			(0x60FC)
-#define RTL838X_SCHED_P_EGR_RATE_CTRL(p)	(0xC008 + (((p) << 7)))
-#define RTL838X_SCHED_Q_EGR_RATE_CTRL(p, q)	(0xC00C + (p << 7) + (((q) << 2)))
-#define RTL838X_STORM_CTRL_PORT_BC_EXCEED	(0x470C)
-#define RTL838X_STORM_CTRL_PORT_MC_EXCEED	(0x4710)
-#define RTL838X_STORM_CTRL_PORT_UC_EXCEED	(0x4714)
-#define RTL839X_STORM_CTRL_PORT_BC_EXCEED(p)	(0x180c + (((p >> 5) << 2)))
-#define RTL839X_STORM_CTRL_PORT_MC_EXCEED(p)	(0x1814 + (((p >> 5) << 2)))
-#define RTL839X_STORM_CTRL_PORT_UC_EXCEED(p)	(0x181c + (((p >> 5) << 2)))
-#define RTL838X_STORM_CTRL_PORT_UC(p)		(0x4718 + (((p) << 2)))
-#define RTL838X_STORM_CTRL_PORT_MC(p)		(0x478c + (((p) << 2)))
-#define RTL838X_STORM_CTRL_PORT_BC(p)		(0x4800 + (((p) << 2)))
-#define RTL839X_STORM_CTRL_PORT_UC_0(p)		(0x185C + (((p) << 3)))
-#define RTL839X_STORM_CTRL_PORT_UC_1(p)		(0x1860 + (((p) << 3)))
-#define RTL839X_STORM_CTRL_PORT_MC_0(p)		(0x19FC + (((p) << 3)))
-#define RTL839X_STORM_CTRL_PORT_MC_1(p)		(0x1a00 + (((p) << 3)))
-#define RTL839X_STORM_CTRL_PORT_BC_0(p)		(0x1B9C + (((p) << 3)))
-#define RTL839X_STORM_CTRL_PORT_BC_1(p)		(0x1BA0 + (((p) << 3)))
-#define RTL839X_TBL_ACCESS_CTRL_2		(0x611C)
-#define RTL839X_TBL_ACCESS_DATA_2(i)		(0x6120 + (((i) << 2)))
-#define RTL839X_IGR_BWCTRL_PORT_CTRL_10G_0(p)	(0x1618 + (((p) << 3)))
-#define RTL839X_IGR_BWCTRL_PORT_CTRL_10G_1(p)	(0x161C + (((p) << 3)))
-#define RTL839X_IGR_BWCTRL_PORT_CTRL_0(p)	(0x1640 + (((p) << 3)))
-#define RTL839X_IGR_BWCTRL_PORT_CTRL_1(p)	(0x1644 + (((p) << 3)))
-#define RTL839X_IGR_BWCTRL_CTRL_LB_THR		(0x1614)
-
-/* Link aggregation (Trunking) */
-#define TRUNK_DISTRIBUTION_ALGO_SPA_BIT         0x01
-#define TRUNK_DISTRIBUTION_ALGO_SMAC_BIT        0x02
-#define TRUNK_DISTRIBUTION_ALGO_DMAC_BIT        0x04
-#define TRUNK_DISTRIBUTION_ALGO_SIP_BIT         0x08
-#define TRUNK_DISTRIBUTION_ALGO_DIP_BIT         0x10
-#define TRUNK_DISTRIBUTION_ALGO_SRC_L4PORT_BIT  0x20
-#define TRUNK_DISTRIBUTION_ALGO_DST_L4PORT_BIT  0x40
-#define TRUNK_DISTRIBUTION_ALGO_MASKALL         0x7F
-
-#define TRUNK_DISTRIBUTION_ALGO_L2_SPA_BIT         0x01
-#define TRUNK_DISTRIBUTION_ALGO_L2_SMAC_BIT        0x02
-#define TRUNK_DISTRIBUTION_ALGO_L2_DMAC_BIT        0x04
-#define TRUNK_DISTRIBUTION_ALGO_L2_VLAN_BIT         0x08
-#define TRUNK_DISTRIBUTION_ALGO_L2_MASKALL         0xF
-
-#define TRUNK_DISTRIBUTION_ALGO_L3_SPA_BIT         0x01
-#define TRUNK_DISTRIBUTION_ALGO_L3_SMAC_BIT        0x02
-#define TRUNK_DISTRIBUTION_ALGO_L3_DMAC_BIT        0x04
-#define TRUNK_DISTRIBUTION_ALGO_L3_VLAN_BIT         0x08
-#define TRUNK_DISTRIBUTION_ALGO_L3_SIP_BIT         0x10
-#define TRUNK_DISTRIBUTION_ALGO_L3_DIP_BIT         0x20
-#define TRUNK_DISTRIBUTION_ALGO_L3_SRC_L4PORT_BIT  0x40
-#define TRUNK_DISTRIBUTION_ALGO_L3_DST_L4PORT_BIT  0x80
-#define TRUNK_DISTRIBUTION_ALGO_L3_PROTO_BIT  0x100
-#define TRUNK_DISTRIBUTION_ALGO_L3_FLOW_LABEL_BIT  0x200
-#define TRUNK_DISTRIBUTION_ALGO_L3_MASKALL         0x3FF
-
-#define RTL838X_TRK_MBR_CTR                     (0x3E00)
-#define RTL838X_TRK_HASH_IDX_CTRL               (0x3E20)
-#define RTL838X_TRK_HASH_CTRL                   (0x3E24)
-
-#define RTL839X_TRK_MBR_CTR                     (0x2200)
-#define RTL839X_TRK_HASH_IDX_CTRL               (0x2280)
-#define RTL839X_TRK_HASH_CTRL                   (0x2284)
-
-#define RTL930X_TRK_MBR_CTRL                    (0xA41C)
-#define RTL930X_TRK_HASH_CTRL                   (0x9F80)
-
-#define RTL931X_TRK_MBR_CTRL                    (0xB8D0)
-#define RTL931X_TRK_HASH_CTRL                   (0xBA70)
-
-/* Attack prevention */
-#define RTL838X_ATK_PRVNT_PORT_EN		(0x5B00)
-#define RTL838X_ATK_PRVNT_CTRL			(0x5B04)
-#define RTL838X_ATK_PRVNT_ACT			(0x5B08)
-#define RTL838X_ATK_PRVNT_STS			(0x5B1C)
-
-/* 802.1X */
-#define RTL838X_RMA_BPDU_FLD_PMSK		(0x4348)
-#define RTL930X_RMA_BPDU_FLD_PMSK		(0x9F18)
-#define RTL931X_RMA_BPDU_FLD_PMSK		(0x8950)
-#define RTL839X_RMA_BPDU_FLD_PMSK		(0x125C)
-
-#define RTL838X_SPCL_TRAP_CTRL			(0x6980)
-#define RTL838X_SPCL_TRAP_EAPOL_CTRL		(0x6988)
-#define RTL838X_SPCL_TRAP_ARP_CTRL		(0x698C)
-#define RTL838X_SPCL_TRAP_IGMP_CTRL		(0x6984)
-#define RTL838X_SPCL_TRAP_IPV6_CTRL		(0x6994)
-#define RTL838X_SPCL_TRAP_SWITCH_MAC_CTRL	(0x6998)
-
-#define RTL839X_SPCL_TRAP_CTRL			(0x1054)
-#define RTL839X_SPCL_TRAP_EAPOL_CTRL		(0x105C)
-#define RTL839X_SPCL_TRAP_ARP_CTRL		(0x1060)
-#define RTL839X_SPCL_TRAP_IGMP_CTRL		(0x1058)
-#define RTL839X_SPCL_TRAP_IPV6_CTRL		(0x1064)
-#define RTL839X_SPCL_TRAP_SWITCH_MAC_CTRL	(0x1068)
-#define RTL839X_SPCL_TRAP_SWITCH_IPV4_ADDR_CTRL	(0x106C)
-#define RTL839X_SPCL_TRAP_CRC_CTRL		(0x1070)
-/* special port action controls */
-/* 
-    values:
-	0 = FORWARD (default)
-	1 = DROP
-	2 = TRAP2CPU
-	3 = FLOOD IN ALL PORT
-
-	Register encoding.
-	offset = CTRL + (port >> 4) << 2
-	value/mask = 3 << ((port&0xF) << 1)
-*/
-
-typedef enum {
-	BPDU = 0,
-	PTP,
-	PTP_UDP,
-	PTP_ETH2,
-	LLTP,
-	EAPOL,
-	GRATARP,
-} rma_ctrl_t;
-
-typedef enum {
-	FORWARD = 0,
-	DROP,
-	TRAP2CPU,
-	FLOODALL,
-	TRAP2MASTERCPU,
-	COPY2CPU,
-} action_type_t;
-
-#define RTL838X_RMA_BPDU_CTRL			(0x4330) 
-#define RTL839X_RMA_BPDU_CTRL			(0x122C)
-#define RTL930X_RMA_BPDU_CTRL			(0x9E7C)
-#define RTL931X_RMA_BPDU_CTRL			(0x881C)
-
-#define RTL838X_RMA_PTP_CTRL			(0x4338) 
-#define RTL839X_RMA_PTP_CTRL			(0x123C)
-#define RTL930X_RMA_PTP_CTRL			(0x9E88)
-#define RTL931X_RMA_PTP_CTRL			(0x8834)
-
-#define RTL838X_RMA_LLTP_CTRL			(0x4340) 
-#define RTL839X_RMA_LLTP_CTRL			(0x124C)
-#define RTL930X_RMA_LLTP_CTRL			(0x9EFC)
-#define RTL931X_RMA_LLTP_CTRL			(0x8918)
-
-#define RTL930X_RMA_EAPOL_CTRL			(0x9F08)
-#define RTL931X_RMA_EAPOL_CTRL			(0x8930)
-#define RTL931X_TRAP_ARP_GRAT_PORT_ACT		(0x8C04)
-
-/* QoS */
-#define RTL838X_QM_INTPRI2QID_CTRL		(0x5F00)
-#define RTL839X_QM_INTPRI2QID_CTRL(q)		(0x1110 + (q << 2))
-#define RTL839X_QM_PORT_QNUM(p)			(0x1130 + (((p / 10) << 2)))
-#define RTL838X_PRI_SEL_PORT_PRI(p)		(0x5FB8 + (((p / 10) << 2)))
-#define RTL839X_PRI_SEL_PORT_PRI(p)		(0x10A8 + (((p / 10) << 2)))
-#define RTL838X_QM_PKT2CPU_INTPRI_MAP		(0x5F10)
-#define RTL839X_QM_PKT2CPU_INTPRI_MAP		(0x1154)
-#define RTL838X_PRI_SEL_CTRL			(0x10E0)
-#define RTL839X_PRI_SEL_CTRL			(0x10E0)
-#define RTL838X_PRI_SEL_TBL_CTRL(i)		(0x5FD8 + (((i) << 2)))
-#define RTL839X_PRI_SEL_TBL_CTRL(i)		(0x10D0 + (((i) << 2)))
-#define RTL838X_QM_PKT2CPU_INTPRI_0		(0x5F04)
-#define RTL838X_QM_PKT2CPU_INTPRI_1		(0x5F08)
-#define RTL838X_QM_PKT2CPU_INTPRI_2		(0x5F0C)
-#define RTL839X_OAM_CTRL			(0x2100)
-#define RTL839X_OAM_PORT_ACT_CTRL(p)	 	(0x2104 + (((p) << 2)))
-#define RTL839X_RMK_PORT_DEI_TAG_CTRL(p)	(0x6A9C + (((p >> 5) << 2)))
-#define RTL839X_PRI_SEL_IPRI_REMAP		(0x1080)
-#define RTL838X_PRI_SEL_IPRI_REMAP		(0x5F8C)
-#define RTL839X_PRI_SEL_DEI2DP_REMAP		(0x10EC)
-#define RTL839X_PRI_SEL_DSCP2DP_REMAP_ADDR(i)	(0x10F0 + (((i >> 4) << 2)))
-#define RTL839X_RMK_DEI_CTRL			(0x6AA4)
-#define RTL839X_WRED_PORT_THR_CTRL(i)		(0x6084 + ((i) << 2))
-#define RTL839X_WRED_QUEUE_THR_CTRL(q, i) 	(0x6090 + ((q) * 12) + ((i) << 2))
-#define RTL838X_PRI_DSCP_INVLD_CTRL0		(0x5FE8)
-#define RTL838X_RMK_IPRI_CTRL			(0xA460)
-#define RTL838X_RMK_OPRI_CTRL			(0xA464)
-#define RTL838X_SCHED_P_TYPE_CTRL(p)		(0xC04C + (((p) << 7)))
-#define RTL838X_SCHED_LB_CTRL(p)		(0xC004 + (((p) << 7)))
-#define RTL838X_FC_P_EGR_DROP_CTRL(p)		(0x6B1C + (((p) << 2)))
-
-/* Debug features */
-#define RTL930X_STAT_PRVTE_DROP_COUNTER0	(0xB5B8)
-
-/* Packet Inspection Engine */
-#define RTL838X_METER_GLB_CTRL			(0x4B08)
-#define RTL839X_METER_GLB_CTRL			(0x1300)
-#define RTL930X_METER_GLB_CTRL			(0xa0a0)
-#define RTL931X_METER_GLB_CTRL			(0x411C)
-
-#define RTL839X_ACL_CTRL			(0x1288)
-
-#define RTL838X_ACL_BLK_LOOKUP_CTRL		(0x6100)
-#define RTL839X_ACL_BLK_LOOKUP_CTRL		(0x1280)
-#define RTL930X_PIE_BLK_LOOKUP_CTRL		(0xa5a0)
-#define RTL931X_PIE_BLK_LOOKUP_CTRL		(0x4180)
-
-#define RTL838X_ACL_BLK_PWR_CTRL		(0x6104)
-#define RTL839X_PS_ACL_PWR_CTRL			(0x049c)
-
-#define RTL838X_ACL_BLK_TMPLTE_CTRL(block)	(0x6108 + ((block) << 2))
-#define RTL839X_ACL_BLK_TMPLTE_CTRL(block)	(0x128c + ((block) << 2))
-#define RTL930X_PIE_BLK_TMPLTE_CTRL(block)	(0xa624 + ((block) << 2))
-#define RTL931X_PIE_BLK_TMPLTE_CTRL(block)	(0x4214 + ((block) << 2))
-
-#define RTL838X_ACL_BLK_GROUP_CTRL		(0x615C)
-#define RTL839X_ACL_BLK_GROUP_CTRL		(0x12ec)
-
-#define RTL838X_ACL_CLR_CTRL			(0x6168)
-#define RTL839X_ACL_CLR_CTRL			(0x12fc)
-#define RTL930X_PIE_CLR_CTRL			(0xa66c)
-#define RTL931X_PIE_CLR_CTRL			(0x42D8)
-
-#define RTL838X_DMY_REG27			(0x3378)
-
-#define RTL838X_ACL_PORT_LOOKUP_CTRL(p)		(0x616C + (((p) << 2)))
-#define RTL930X_ACL_PORT_LOOKUP_CTRL(p)		(0xA784 + (((p) << 2)))
-#define RTL931X_ACL_PORT_LOOKUP_CTRL(p)		(0x44F8 + (((p) << 2)))
-
-#define RTL930X_PIE_BLK_PHASE_CTRL		(0xA5A4)
-#define RTL931X_PIE_BLK_PHASE_CTRL		(0x4184)
-
-// PIE actions
-#define PIE_ACT_COPY_TO_PORT	2
-#define PIE_ACT_REDIRECT_TO_PORT 4
-#define PIE_ACT_ROUTE_UC	6
-#define PIE_ACT_VID_ASSIGN	0
-
-// L3 actions
-#define L3_FORWARD		0
-#define L3_DROP			1
-#define L3_TRAP2CPU		2
-#define L3_COPY2CPU		3
-#define L3_TRAP2MASTERCPU	4
-#define L3_COPY2MASTERCPU	5
-#define L3_HARDDROP		6
-
-// Route actions
-#define ROUTE_ACT_FORWARD	0
-#define ROUTE_ACT_TRAP2CPU	1
-#define ROUTE_ACT_COPY2CPU	2
-#define ROUTE_ACT_DROP		3
-
-/* L3 Routing */
-#define RTL839X_ROUTING_SA_CTRL 		0x6afc
-#define RTL930X_L3_HOST_TBL_CTRL		(0xAB48)
-#define RTL930X_L3_IPUC_ROUTE_CTRL		(0xAB4C)
-#define RTL930X_L3_IP6UC_ROUTE_CTRL		(0xAB50)
-#define RTL930X_L3_IPMC_ROUTE_CTRL		(0xAB54)
-#define RTL930X_L3_IP6MC_ROUTE_CTRL		(0xAB58)
-#define RTL930X_L3_IP_MTU_CTRL(i)		(0xAB5C + ((i >> 1) << 2))
-#define RTL930X_L3_IP6_MTU_CTRL(i)		(0xAB6C + ((i >> 1) << 2))
-#define RTL930X_L3_HW_LU_KEY_CTRL		(0xAC9C)
-#define RTL930X_L3_HW_LU_KEY_IP_CTRL		(0xACA0)
-#define RTL930X_L3_HW_LU_CTRL			(0xACC0)
-#define RTL930X_L3_IP_ROUTE_CTRL		0xab44
-
-/* Port LED Control */
-#define RTL930X_LED_PORT_NUM_CTRL(p)		(0xCC04 + (((p >> 4) << 2)))
-#define RTL930X_LED_SET0_0_CTRL			(0xCC28)
-#define RTL930X_LED_PORT_COPR_SET_SEL_CTRL(p)	(0xCC2C + (((p >> 4) << 2)))
-#define RTL930X_LED_PORT_FIB_SET_SEL_CTRL(p)	(0xCC34 + (((p >> 4) << 2)))
-#define RTL930X_LED_PORT_COPR_MASK_CTRL		(0xCC3C)
-#define RTL930X_LED_PORT_FIB_MASK_CTRL		(0xCC40)
-#define RTL930X_LED_PORT_COMBO_MASK_CTRL	(0xCC44)
-
-#define RTL931X_LED_PORT_NUM_CTRL(p)		(0x0604 + (((p >> 4) << 2)))
-#define RTL931X_LED_SET0_0_CTRL			(0x0630)
-#define RTL931X_LED_PORT_COPR_SET_SEL_CTRL(p)	(0x0634 + (((p >> 4) << 2)))
-#define RTL931X_LED_PORT_FIB_SET_SEL_CTRL(p)	(0x0644 + (((p >> 4) << 2)))
-#define RTL931X_LED_PORT_COPR_MASK_CTRL		(0x0654)
-#define RTL931X_LED_PORT_FIB_MASK_CTRL		(0x065c)
-#define RTL931X_LED_PORT_COMBO_MASK_CTRL	(0x0664)
-
-#define MAX_VLANS 4096
-#define MAX_LAGS 16
-#define MAX_PRIOS 8
-#define RTL930X_PORT_IGNORE 0x3f
-#define MAX_MC_GROUPS 512
-#define UNKNOWN_MC_PMASK (MAX_MC_GROUPS - 1)
-#define PIE_BLOCK_SIZE 128
-#define MAX_PIE_ENTRIES (18 * PIE_BLOCK_SIZE)
-#define N_FIXED_FIELDS 12
-#define N_FIXED_FIELDS_RTL931X 14
-#define MAX_COUNTERS 2048
-#define MAX_ROUTES 512
-#define MAX_HOST_ROUTES 1536
-#define MAX_INTF_MTUS 8
-#define DEFAULT_MTU 1536
-#define MAX_INTERFACES 100
-#define MAX_ROUTER_MACS 64
-#define L3_EGRESS_DMACS 2048
-#define MAX_SMACS 64
-
-enum phy_type {
-	PHY_NONE = 0,
-	PHY_RTL838X_SDS = 1,
-	PHY_RTL8218B_INT = 2,
-	PHY_RTL8218B_EXT = 3,
-	PHY_RTL8214FC = 4,
-	PHY_RTL839X_SDS = 5,
-	PHY_RTL930X_SDS = 6,
-};
-
-enum pbvlan_type {
-	PBVLAN_TYPE_INNER = 0,
-	PBVLAN_TYPE_OUTER,
-};
-
-enum pbvlan_mode {
-	PBVLAN_MODE_UNTAG_AND_PRITAG = 0,
-	PBVLAN_MODE_UNTAG_ONLY,
-	PBVLAN_MODE_ALL_PKT,
-};
-
-struct rtl838x_port {
-	bool enable;
-	u64 pm;
-	u16 pvid;
-	bool eee_enabled;
-	enum phy_type phy;
-	bool phy_is_integrated;
-	bool is10G;
-	bool is2G5;
-	int sds_num;
-	int led_set;
-	const struct dsa_port *dp;
-};
-
-struct rtl838x_vlan_info {
-	u64 untagged_ports;
-	u64 tagged_ports;
-	u8 profile_id;
-	bool hash_mc_fid;
-	bool hash_uc_fid;
-	u8 fid; // AKA MSTI
-
-	// The following fields are used only by the RTL931X
-	int if_id;		// Interface (index in L3_EGR_INTF_IDX)
-	u16 multicast_grp_mask;
-	int l2_tunnel_list_id;
-};
-
-enum l2_entry_type {
-	L2_INVALID = 0,
-	L2_UNICAST = 1,
-	L2_MULTICAST = 2,
-	IP4_MULTICAST = 3,
-	IP6_MULTICAST = 4,
-};
-
-struct rtl838x_l2_entry {
-	u8 mac[6];
-	u16 vid;
-	u16 rvid;
-	u8 port;
-	bool valid;
-	enum l2_entry_type type;
-	bool is_static;
-	bool is_ip_mc;
-	bool is_ipv6_mc;
-	bool block_da;
-	bool block_sa;
-	bool suspended;
-	bool next_hop;
-	int age;
-	u8 trunk;
-	bool is_trunk;
-	u8 stack_dev;
-	u16 mc_portmask_index;
-	u32 mc_gip;
-	u32 mc_sip;
-	u16 mc_mac_index;
-	u16 nh_route_id;
-	bool nh_vlan_target;  // Only RTL83xx: VLAN used for next hop
-
-	// The following is only valid on RTL931x
-	bool is_open_flow;
-	bool is_pe_forward;
-	bool is_local_forward;
-	bool is_remote_forward;
-	bool is_l2_tunnel;
-	int l2_tunnel_id;
-	int l2_tunnel_list_id;
-};
-
-enum fwd_rule_action {
-	FWD_RULE_ACTION_NONE = 0,
-	FWD_RULE_ACTION_FWD = 1,
-};
-
-enum pie_phase {
-	PHASE_VACL = 0,
-	PHASE_IACL = 1,
-};
-
-enum igr_filter {
-	IGR_FORWARD = 0,
-	IGR_DROP = 1,
-	IGR_TRAP = 2,
-};
-
-enum egr_filter {
-	EGR_DISABLE = 0,
-	EGR_ENABLE = 1,
-};
-
-/* Intermediate representation of a  Packet Inspection Engine Rule
- * as suggested by the Kernel's tc flower offload subsystem
- * Field meaning is universal across SoC families, but data content is specific
- * to SoC family (e.g. because of different port ranges) */
-struct pie_rule {
-	int id;
-	enum pie_phase phase;	// Phase in which this template is applied
-	int packet_cntr;	// ID of a packet counter assigned to this rule
-	int octet_cntr;		// ID of a byte counter assigned to this rule
-	u32 last_packet_cnt;
-	u64 last_octet_cnt;
-
-	// The following are requirements for the pie template
-	bool is_egress;
-	bool is_ipv6;		// This is a rule with IPv6 fields
-
-	// Fixed fields that are always matched against on RTL8380
-	u8 spmmask_fix;
-	u8 spn;			// Source port number
-	bool stacking_port;	// Source port is stacking port
-	bool mgnt_vlan;		// Packet arrived on management VLAN
-	bool dmac_hit_sw;	// The packet's destination MAC matches one of the device's
-	bool content_too_deep;	// The content of the packet cannot be parsed: too many layers
-	bool not_first_frag;	// Not the first IP fragment
-	u8 frame_type_l4;	// 0: UDP, 1: TCP, 2: ICMP/ICMPv6, 3: IGMP
-	u8 frame_type;		// 0: ARP, 1: L2 only, 2: IPv4, 3: IPv6
-	bool otag_fmt;		// 0: outer tag packet, 1: outer priority tag or untagged
-	bool itag_fmt;		// 0: inner tag packet, 1: inner priority tag or untagged
-	bool otag_exist;	// packet with outer tag
-	bool itag_exist;	// packet with inner tag
-	bool frame_type_l2;	// 0: Ethernet, 1: LLC_SNAP, 2: LLC_Other, 3: Reserved
-	bool igr_normal_port;	// Ingress port is not cpu or stacking port
-	u8 tid;			// The template ID defining the what the templated fields mean
-
-	// Masks for the fields that are always matched against on RTL8380
-	u8 spmmask_fix_m;
-	u8 spn_m;
-	bool stacking_port_m;
-	bool mgnt_vlan_m;
-	bool dmac_hit_sw_m;
-	bool content_too_deep_m;
-	bool not_first_frag_m;
-	u8 frame_type_l4_m;
-	u8 frame_type_m;
-	bool otag_fmt_m;
-	bool itag_fmt_m;
-	bool otag_exist_m;
-	bool itag_exist_m;
-	bool frame_type_l2_m;
-	bool igr_normal_port_m;
-	u8 tid_m;
-
-	// Logical operations between rules, special rules for rule numbers apply
-	bool valid;
-	bool cond_not;		// Matches when conditions not match
-	bool cond_and1;		// And this rule 2n with the next rule 2n+1 in same block
-	bool cond_and2;		// And this rule m in block 2n with rule m in block 2n+1
-	bool ivalid;
-
-	// Actions to be performed
-	bool drop;		// Drop the packet
-	bool fwd_sel;		// Forward packet: to port, portmask, dest route, next rule, drop
-	bool ovid_sel;		// So something to outer vlan-id: shift, re-assign
-	bool ivid_sel;		// Do something to inner vlan-id: shift, re-assign
-	bool flt_sel;		// Filter the packet when sending to certain ports
-	bool log_sel;		// Log the packet in one of the LOG-table counters
-	bool rmk_sel;		// Re-mark the packet, i.e. change the priority-tag
-	bool meter_sel;		// Meter the packet, i.e. limit rate of this type of packet
-	bool tagst_sel;		// Change the ergress tag
-	bool mir_sel;		// Mirror the packet to a Link Aggregation Group
-	bool nopri_sel;		// Change the normal priority
-	bool cpupri_sel;	// Change the CPU priority
-	bool otpid_sel;		// Change Outer Tag Protocol Identifier (802.1q)
-	bool itpid_sel;		// Change Inner Tag Protocol Identifier (802.1q)
-	bool shaper_sel;	// Apply traffic shaper
-	bool mpls_sel;		// MPLS actions
-	bool bypass_sel;	// Bypass actions
-	bool fwd_sa_lrn;	// Learn the source address when forwarding
-	bool fwd_mod_to_cpu;	// Forward the modified VLAN tag format to CPU-port
-
-	// Fields used in predefined templates 0-2 on RTL8380 / 90 / 9300
-	u64 spm;		// Source Port Matrix
-	u16 otag;		// Outer VLAN-ID
-	u8 smac[ETH_ALEN];	// Source MAC address
-	u8 dmac[ETH_ALEN];	// Destination MAC address
-	u16 ethertype;		// Ethernet frame type field in ethernet header
-	u16 itag;		// Inner VLAN-ID
-	u16 field_range_check;
-	u32 sip;		// Source IP
-	struct in6_addr sip6;	// IPv6 Source IP
-	u32 dip;		// Destination IP
-	struct in6_addr dip6;	// IPv6 Destination IP
-	u16 tos_proto;		// IPv4: TOS + Protocol fields, IPv6: Traffic class + next header
-	u16 sport;		// TCP/UDP source port
-	u16 dport;		// TCP/UDP destination port
-	u16 icmp_igmp;
-	u16 tcp_info;
-	u16 dsap_ssap;		// Destination / Source Service Access Point bytes (802.3)
-
-	u64 spm_m;
-	u16 otag_m;
-	u8 smac_m[ETH_ALEN];
-	u8 dmac_m[ETH_ALEN];
-	u8 ethertype_m;
-	u16 itag_m;
-	u16 field_range_check_m;
-	u32 sip_m;
-	struct in6_addr sip6_m;	// IPv6 Source IP mask
-	u32 dip_m;
-	struct in6_addr dip6_m;	// IPv6 Destination IP mask
-	u16 tos_proto_m;
-	u16 sport_m;
-	u16 dport_m;
-	u16 icmp_igmp_m;
-	u16 tcp_info_m;
-	u16 dsap_ssap_m;
-
-	// Data associated with actions
-	u8 fwd_act;		// Type of forwarding action
-				// 0: permit, 1: drop, 2: copy to port id, 4: copy to portmask
-				// 4: redirect to portid, 5: redirect to portmask
-				// 6: route, 7: vlan leaky (only 8380)
-	u16 fwd_data;		// Additional data for forwarding action, e.g. destination port
-	u8 ovid_act;
-	u16 ovid_data;		// Outer VLAN ID
-	u8 ivid_act;
-	u16 ivid_data;		// Inner VLAN ID
-	u16 flt_data;		// Filtering data
-	u16 log_data;		// ID of packet or octet counter in LOG table, on RTL93xx
-				// unnecessary since PIE-Rule-ID == LOG-counter-ID
-	bool log_octets;
-	u8 mpls_act;		// MPLS action type
-	u16 mpls_lib_idx;	// MPLS action data
-
-	u16 rmk_data;		// Data for remarking
-	u16 meter_data;		// ID of meter for bandwidth control
-	u16 tagst_data;
-	u16 mir_data;
-	u16 nopri_data;
-	u16 cpupri_data;
-	u16 otpid_data;
-	u16 itpid_data;
-	u16 shaper_data;
-
-	// Bypass actions, ignored on RTL8380
-	bool bypass_all;	// Not clear
-	bool bypass_igr_stp;	// Bypass Ingress STP state
-	bool bypass_ibc_sc;	// Bypass Ingress Bandwidth Control and Storm Control
-};
-
-struct rtl838x_l3_intf {
-	u16 vid;
-	u8 smac_idx;
-	u8 ip4_mtu_id;
-	u8 ip6_mtu_id;
-	u16 ip4_mtu;
-	u16 ip6_mtu;
-	u8 ttl_scope;
-	u8 hl_scope;
-	u8 ip4_icmp_redirect;
-	u8 ip6_icmp_redirect;
-	u8 ip4_pbr_icmp_redirect;
-	u8 ip6_pbr_icmp_redirect;
-};
-
-/*
- * An entry in the RTL93XX SoC's ROUTER_MAC tables setting up a termination point
- * for the L3 routing system. Packets arriving and matching an entry in this table
- * will be considered for routing.
- * Mask fields state whether the corresponding data fields matter for matching
- */
-struct rtl93xx_rt_mac {
-	bool valid;	// Valid or not
-	bool p_type;	// Individual (0) or trunk (1) port
-	bool p_mask;	// Whether the port type is used
-	u8 p_id;
-	u8 p_id_mask;	// Mask for the port
-	u8 action;	// Routing action performed: 0: FORWARD, 1: DROP, 2: TRAP2CPU
-			//   3: COPY2CPU, 4: TRAP2MASTERCPU, 5: COPY2MASTERCPU, 6: HARDDROP
-	u16 vid;
-	u16 vid_mask;
-	u64 mac;	// MAC address used as source MAC in the routed packet
-	u64 mac_mask;
-};
-
-struct rtl83xx_nexthop {
-	u16 id;		// ID: L3_NEXT_HOP table-index or route-index set in L2_NEXT_HOP
-	u32 dev_id;
-	u16 port;
-	u16 vid;	// VLAN-ID for L2 table entry (saved from L2-UC entry)
-	u16 rvid;	// Relay VID/FID for the L2 table entry
-	u64 mac;	// The MAC address of the entry in the L2_NEXT_HOP table
-	u16 mac_id;
-	u16 l2_id;	// Index of this next hop forwarding entry in L2 FIB table
-	u64 gw;		// The gateway MAC address packets are forwarded to
-	int if_id;	// Interface (into L3_EGR_INTF_IDX)
-};
-
-struct rtl838x_switch_priv;
-
-struct rtl83xx_flow {
-	unsigned long cookie;
-	struct rhash_head node;
-	struct rcu_head rcu_head;
-	struct rtl838x_switch_priv *priv;
-	struct pie_rule rule;
-	u32 flags;
-};
-
-struct rtl93xx_route_attr {
-	bool valid;
-	bool hit;
-	bool ttl_dec;
-	bool ttl_check;
-	bool dst_null;
-	bool qos_as;
-	u8 qos_prio;
-	u8 type;
-	u8 action;
-};
-
-struct rtl83xx_route {
-	u32 gw_ip;			// IP of the route's gateway
-	u32 dst_ip;			// IP of the destination net
-	struct in6_addr dst_ip6;
-	int prefix_len;			// Network prefix len of the destination net
-	bool is_host_route;
-	int id;				// ID number of this route
-	struct rhlist_head linkage;
-	u16 switch_mac_id;		// Index into switch's own MACs, RTL839X only
-	struct rtl83xx_nexthop nh;
-	struct pie_rule pr;
-	struct rtl93xx_route_attr attr;
-};
-
-struct rtl838x_reg {
-	void (*mask_port_reg_be)(u64 clear, u64 set, int reg);
-	void (*set_port_reg_be)(u64 set, int reg);
-	u64 (*get_port_reg_be)(int reg);
-	void (*mask_port_reg_le)(u64 clear, u64 set, int reg);
-	void (*set_port_reg_le)(u64 set, int reg);
-	u64 (*get_port_reg_le)(int reg);
-	int stat_port_rst;
-	int stat_rst;
-	int stat_port_std_mib;
-	int (*port_iso_ctrl)(int p);
-	void (*traffic_enable)(int source, int dest);
-	void (*traffic_disable)(int source, int dest);
-	void (*traffic_set)(int source, u64 dest_matrix);
-	u64 (*traffic_get)(int source);
-	int l2_ctrl_0;
-	int l2_ctrl_1;
-	int smi_poll_ctrl;
-	u32 l2_port_aging_out;
-	int l2_tbl_flush_ctrl;
-	void (*exec_tbl0_cmd)(u32 cmd);
-	void (*exec_tbl1_cmd)(u32 cmd);
-	int (*tbl_access_data_0)(int i);
-	int isr_glb_src;
-	int isr_port_link_sts_chg;
-	int imr_port_link_sts_chg;
-	int imr_glb;
-	void (*vlan_tables_read)(u32 vlan, struct rtl838x_vlan_info *info);
-	void (*vlan_set_tagged)(u32 vlan, struct rtl838x_vlan_info *info);
-	void (*vlan_set_untagged)(u32 vlan, u64 portmask);
-	void (*vlan_profile_dump)(int index);
-	void (*vlan_profile_setup)(int profile);
-	void (*vlan_port_pvidmode_set)(int port, enum pbvlan_type type, enum pbvlan_mode mode);
-	void (*vlan_port_pvid_set)(int port, enum pbvlan_type type, int pvid);
-	void (*vlan_port_keep_tag_set)(int port, bool keep_outer, bool keep_inner);
-	void (*set_vlan_igr_filter)(int port, enum igr_filter state);
-	void (*set_vlan_egr_filter)(int port, enum egr_filter state);
-	void (*enable_learning)(int port, bool enable);
-	void (*enable_flood)(int port, bool enable);
-	void (*enable_mcast_flood)(int port, bool enable);
-	void (*enable_bcast_flood)(int port, bool enable);
-	void (*set_static_move_action)(int port, bool forward);
-	void (*stp_get)(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]);
-	void (*stp_set)(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]);
-	int  (*mac_force_mode_ctrl)(int port);
-	int  (*mac_port_ctrl)(int port);
-	int  (*l2_port_new_salrn)(int port);
-	int  (*l2_port_new_sa_fwd)(int port);
-	int (*set_ageing_time)(unsigned long msec);
-	int mir_ctrl;
-	int mir_dpm;
-	int mir_spm;
-	int mac_link_sts;
-	int mac_link_dup_sts;
-	int  (*mac_link_spd_sts)(int port);
-	int mac_rx_pause_sts;
-	int mac_tx_pause_sts;
-	u64 (*read_l2_entry_using_hash)(u32 hash, u32 position, struct rtl838x_l2_entry *e);
-	void (*write_l2_entry_using_hash)(u32 hash, u32 pos, struct rtl838x_l2_entry *e);
-	u64 (*read_cam)(int idx, struct rtl838x_l2_entry *e);
-	void (*write_cam)(int idx, struct rtl838x_l2_entry *e);
-	int (*trk_mbr_ctr)(int group);
-	int rma_bpdu_fld_pmask;
-	int spcl_trap_eapol_ctrl;
-	void (*init_eee)(struct rtl838x_switch_priv *priv, bool enable);
-	void (*port_eee_set)(struct rtl838x_switch_priv *priv, int port, bool enable);
-	int (*eee_port_ability)(struct rtl838x_switch_priv *priv,
-				struct ethtool_eee *e, int port);
-	u64 (*l2_hash_seed)(u64 mac, u32 vid);
-	u32 (*l2_hash_key)(struct rtl838x_switch_priv *priv, u64 seed);
-	u64 (*read_mcast_pmask)(int idx);
-	void (*write_mcast_pmask)(int idx, u64 portmask);
-	void (*vlan_fwd_on_inner)(int port, bool is_set);
-	void (*pie_init)(struct rtl838x_switch_priv *priv);
-	int (*pie_rule_read)(struct rtl838x_switch_priv *priv, int idx, struct  pie_rule *pr);
-	int (*pie_rule_write)(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr);
-	int (*pie_rule_add)(struct rtl838x_switch_priv *priv, struct pie_rule *rule);
-	void (*pie_rule_rm)(struct rtl838x_switch_priv *priv, struct pie_rule *rule);
-	void (*l2_learning_setup)(void);
-	u32 (*packet_cntr_read)(int counter);
-	void (*packet_cntr_clear)(int counter);
-	void (*route_read)(int idx, struct rtl83xx_route *rt);
-	void (*route_write)(int idx, struct rtl83xx_route *rt);
-	void (*host_route_write)(int idx, struct rtl83xx_route *rt);
-	int (*l3_setup)(struct rtl838x_switch_priv *priv);
-	void (*set_l3_nexthop)(int idx, u16 dmac_id, u16 interface);
-	void (*get_l3_nexthop)(int idx, u16 *dmac_id, u16 *interface);
-	u64 (*get_l3_egress_mac)(u32 idx);
-	void (*set_l3_egress_mac)(u32 idx, u64 mac);
-	int (*find_l3_slot)(struct rtl83xx_route *rt, bool must_exist);
-	int (*route_lookup_hw)(struct rtl83xx_route *rt);
-	void (*get_l3_router_mac)(u32 idx, struct rtl93xx_rt_mac *m);
-	void (*set_l3_router_mac)(u32 idx, struct rtl93xx_rt_mac *m);
-	void (*set_l3_egress_intf)(int idx, struct rtl838x_l3_intf *intf);
-	void (*set_distribution_algorithm)(int group, int algoidx, u32 algomask);
-	void (*set_receive_management_action)(int port, rma_ctrl_t type, action_type_t action);
-	void (*led_init)(struct rtl838x_switch_priv *priv);
-};
-
-struct rtl838x_switch_priv {
-	/* Switch operation */
-	struct dsa_switch *ds;
-	struct device *dev;
-	u16 id;
-	u16 family_id;
-	char version;
-	struct rtl838x_port ports[57];
-	struct mutex reg_mutex;		// Mutex for individual register manipulations
-	struct mutex pie_mutex;		// Mutex for Packet Inspection Engine
-	int link_state_irq;
-	int mirror_group_ports[4];
-	struct mii_bus *mii_bus;
-	const struct rtl838x_reg *r;
-	u8 cpu_port;
-	u8 port_mask;
-	u8 port_width;
-	u8 port_ignore;
-	u64 irq_mask;
-	u32 fib_entries;
-	int l2_bucket_size;
-	struct dentry *dbgfs_dir;
-	int n_lags;
-	u64 lags_port_members[MAX_LAGS];
-	struct net_device *lag_devs[MAX_LAGS];
-	u32 lag_primary[MAX_LAGS];
-	u32 is_lagmember[57];
-	u64 lagmembers;
-	struct notifier_block nb;  // TODO: change to different name
-	struct notifier_block ne_nb;
-	struct notifier_block fib_nb;
-	bool eee_enabled;
-	unsigned long int mc_group_bm[MAX_MC_GROUPS >> 5];
-	int n_pie_blocks;
-	struct rhashtable tc_ht;
-	unsigned long int pie_use_bm[MAX_PIE_ENTRIES >> 5];
-	int n_counters;
-	unsigned long int octet_cntr_use_bm[MAX_COUNTERS >> 5];
-	unsigned long int packet_cntr_use_bm[MAX_COUNTERS >> 4];
-	struct rhltable routes;
-	unsigned long int route_use_bm[MAX_ROUTES >> 5];
-	unsigned long int host_route_use_bm[MAX_HOST_ROUTES >> 5];
-	struct rtl838x_l3_intf *interfaces[MAX_INTERFACES];
-	u16 intf_mtus[MAX_INTF_MTUS];
-	int intf_mtu_count[MAX_INTF_MTUS];
-};
-
-void rtl838x_dbgfs_init(struct rtl838x_switch_priv *priv);
-void rtl930x_dbgfs_init(struct rtl838x_switch_priv *priv);
-
-#endif /* _RTL838X_H */
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c
deleted file mode 100644
index c34bff78d73b..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c
+++ /dev/null
@@ -1,1948 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-#include "rtl83xx.h"
-
-#define RTL839X_VLAN_PORT_TAG_STS_UNTAG				0x0
-#define RTL839X_VLAN_PORT_TAG_STS_TAGGED			0x1
-#define RTL839X_VLAN_PORT_TAG_STS_PRIORITY_TAGGED		0x2
-
-#define RTL839X_VLAN_PORT_TAG_STS_CTRL_BASE			0x6828
-/* port 0-52 */
-#define RTL839X_VLAN_PORT_TAG_STS_CTRL(port) \
-		RTL839X_VLAN_PORT_TAG_STS_CTRL_BASE + (port << 2)
-#define RTL839X_VLAN_PORT_TAG_STS_CTRL_OTAG_STS_MASK		GENMASK(7,6)
-#define RTL839X_VLAN_PORT_TAG_STS_CTRL_ITAG_STS_MASK		GENMASK(5,4)
-#define RTL839X_VLAN_PORT_TAG_STS_CTRL_EGR_P_OTAG_KEEP_MASK	GENMASK(3,3)
-#define RTL839X_VLAN_PORT_TAG_STS_CTRL_EGR_P_ITAG_KEEP_MASK	GENMASK(2,2)
-#define RTL839X_VLAN_PORT_TAG_STS_CTRL_IGR_P_OTAG_KEEP_MASK	GENMASK(1,1)
-#define RTL839X_VLAN_PORT_TAG_STS_CTRL_IGR_P_ITAG_KEEP_MASK	GENMASK(0,0)
-
-extern struct mutex smi_lock;
-extern struct rtl83xx_soc_info soc_info;
-
-/* Definition of the RTL839X-specific template field IDs as used in the PIE */
-enum template_field_id {
-	TEMPLATE_FIELD_SPMMASK = 0,
-	TEMPLATE_FIELD_SPM0 = 1,		// Source portmask ports 0-15
-	TEMPLATE_FIELD_SPM1 = 2,		// Source portmask ports 16-31
-	TEMPLATE_FIELD_SPM2 = 3,		// Source portmask ports 32-47
-	TEMPLATE_FIELD_SPM3 = 4,		// Source portmask ports 48-56
-	TEMPLATE_FIELD_DMAC0 = 5,		// Destination MAC [15:0]
-	TEMPLATE_FIELD_DMAC1 = 6,		// Destination MAC [31:16]
-	TEMPLATE_FIELD_DMAC2 = 7,		// Destination MAC [47:32]
-	TEMPLATE_FIELD_SMAC0 = 8,		// Source MAC [15:0]
-	TEMPLATE_FIELD_SMAC1 = 9,		// Source MAC [31:16]
-	TEMPLATE_FIELD_SMAC2 = 10,		// Source MAC [47:32]
-	TEMPLATE_FIELD_ETHERTYPE = 11,		// Ethernet frame type field
-	// Field-ID 12 is not used
-	TEMPLATE_FIELD_OTAG = 13,
-	TEMPLATE_FIELD_ITAG = 14,
-	TEMPLATE_FIELD_SIP0 = 15,
-	TEMPLATE_FIELD_SIP1 = 16,
-	TEMPLATE_FIELD_DIP0 = 17,
-	TEMPLATE_FIELD_DIP1 = 18,
-	TEMPLATE_FIELD_IP_TOS_PROTO = 19,
-	TEMPLATE_FIELD_IP_FLAG = 20,
-	TEMPLATE_FIELD_L4_SPORT = 21,
-	TEMPLATE_FIELD_L4_DPORT = 22,
-	TEMPLATE_FIELD_L34_HEADER = 23,
-	TEMPLATE_FIELD_ICMP_IGMP = 24,
-	TEMPLATE_FIELD_VID_RANG0 = 25,
-	TEMPLATE_FIELD_VID_RANG1 = 26,
-	TEMPLATE_FIELD_L4_PORT_RANG = 27,
-	TEMPLATE_FIELD_FIELD_SELECTOR_VALID = 28,
-	TEMPLATE_FIELD_FIELD_SELECTOR_0 = 29,
-	TEMPLATE_FIELD_FIELD_SELECTOR_1 = 30,
-	TEMPLATE_FIELD_FIELD_SELECTOR_2 = 31,
-	TEMPLATE_FIELD_FIELD_SELECTOR_3 = 32,
-	TEMPLATE_FIELD_FIELD_SELECTOR_4 = 33,
-	TEMPLATE_FIELD_FIELD_SELECTOR_5 = 34,
-	TEMPLATE_FIELD_SIP2 = 35,
-	TEMPLATE_FIELD_SIP3 = 36,
-	TEMPLATE_FIELD_SIP4 = 37,
-	TEMPLATE_FIELD_SIP5 = 38,
-	TEMPLATE_FIELD_SIP6 = 39,
-	TEMPLATE_FIELD_SIP7 = 40,
-	TEMPLATE_FIELD_OLABEL = 41,
-	TEMPLATE_FIELD_ILABEL = 42,
-	TEMPLATE_FIELD_OILABEL = 43,
-	TEMPLATE_FIELD_DPMMASK = 44,
-	TEMPLATE_FIELD_DPM0 = 45,
-	TEMPLATE_FIELD_DPM1 = 46,
-	TEMPLATE_FIELD_DPM2 = 47,
-	TEMPLATE_FIELD_DPM3 = 48,
-	TEMPLATE_FIELD_L2DPM0 = 49,
-	TEMPLATE_FIELD_L2DPM1 = 50,
-	TEMPLATE_FIELD_L2DPM2 = 51,
-	TEMPLATE_FIELD_L2DPM3 = 52,
-	TEMPLATE_FIELD_IVLAN = 53,
-	TEMPLATE_FIELD_OVLAN = 54,
-	TEMPLATE_FIELD_FWD_VID = 55,
-	TEMPLATE_FIELD_DIP2 = 56,
-	TEMPLATE_FIELD_DIP3 = 57,
-	TEMPLATE_FIELD_DIP4 = 58,
-	TEMPLATE_FIELD_DIP5 = 59,
-	TEMPLATE_FIELD_DIP6 = 60,
-	TEMPLATE_FIELD_DIP7 = 61,
-};
-
-// Number of fixed templates predefined in the SoC
-#define N_FIXED_TEMPLATES 5
-static enum template_field_id fixed_templates[N_FIXED_TEMPLATES][N_FIXED_FIELDS] =
-{
-	{
-	  TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1, TEMPLATE_FIELD_ITAG,
-	  TEMPLATE_FIELD_SMAC0, TEMPLATE_FIELD_SMAC1, TEMPLATE_FIELD_SMAC2,
-	  TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2,
-	  TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_SPM2, TEMPLATE_FIELD_SPM3
-	}, {
-	  TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0,
-	  TEMPLATE_FIELD_DIP1,TEMPLATE_FIELD_IP_TOS_PROTO, TEMPLATE_FIELD_L4_SPORT,
-	  TEMPLATE_FIELD_L4_DPORT, TEMPLATE_FIELD_ICMP_IGMP, TEMPLATE_FIELD_SPM0,
-	  TEMPLATE_FIELD_SPM1, TEMPLATE_FIELD_SPM2, TEMPLATE_FIELD_SPM3
-	}, {
-	  TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2,
-	  TEMPLATE_FIELD_ITAG, TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_IP_TOS_PROTO,
-	  TEMPLATE_FIELD_L4_DPORT, TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_SIP0,
-	  TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0, TEMPLATE_FIELD_DIP1
-	}, {
-	  TEMPLATE_FIELD_DIP0, TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_DIP2,
-	  TEMPLATE_FIELD_DIP3, TEMPLATE_FIELD_DIP4, TEMPLATE_FIELD_DIP5,
-	  TEMPLATE_FIELD_DIP6, TEMPLATE_FIELD_DIP7, TEMPLATE_FIELD_L4_DPORT,
-	  TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_ICMP_IGMP, TEMPLATE_FIELD_IP_TOS_PROTO
-	}, {
-	  TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_SIP2,
-	  TEMPLATE_FIELD_SIP3, TEMPLATE_FIELD_SIP4, TEMPLATE_FIELD_SIP5,
-	  TEMPLATE_FIELD_SIP6, TEMPLATE_FIELD_SIP7, TEMPLATE_FIELD_SPM0,
-	  TEMPLATE_FIELD_SPM1, TEMPLATE_FIELD_SPM2, TEMPLATE_FIELD_SPM3
-	},
-};
-
-void rtl839x_print_matrix(void)
-{
-	volatile u64 *ptr9;
-	int i;
-
-	ptr9 = RTL838X_SW_BASE + RTL839X_PORT_ISO_CTRL(0);
-	for (i = 0; i < 52; i += 4)
-		pr_debug("> %16llx %16llx %16llx %16llx\n",
-			ptr9[i + 0], ptr9[i + 1], ptr9[i + 2], ptr9[i + 3]);
-	pr_debug("CPU_PORT> %16llx\n", ptr9[52]);
-}
-
-static inline int rtl839x_port_iso_ctrl(int p)
-{
-	return RTL839X_PORT_ISO_CTRL(p);
-}
-
-static inline void rtl839x_exec_tbl0_cmd(u32 cmd)
-{
-	sw_w32(cmd, RTL839X_TBL_ACCESS_CTRL_0);
-	do { } while (sw_r32(RTL839X_TBL_ACCESS_CTRL_0) & BIT(16));
-}
-
-static inline void rtl839x_exec_tbl1_cmd(u32 cmd)
-{
-	sw_w32(cmd, RTL839X_TBL_ACCESS_CTRL_1);
-	do { } while (sw_r32(RTL839X_TBL_ACCESS_CTRL_1) & BIT(16));
-}
-
-inline void rtl839x_exec_tbl2_cmd(u32 cmd)
-{
-	sw_w32(cmd, RTL839X_TBL_ACCESS_CTRL_2);
-	do { } while (sw_r32(RTL839X_TBL_ACCESS_CTRL_2) & (1 << 9));
-}
-
-static inline int rtl839x_tbl_access_data_0(int i)
-{
-	return RTL839X_TBL_ACCESS_DATA_0(i);
-}
-
-static void rtl839x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info)
-{
-	u32 u, v, w;
-	// Read VLAN table (0) via register 0
-	struct table_reg *r = rtl_table_get(RTL8390_TBL_0, 0);
-
-	rtl_table_read(r, vlan);
-	u = sw_r32(rtl_table_data(r, 0));
-	v = sw_r32(rtl_table_data(r, 1));
-	w = sw_r32(rtl_table_data(r, 2));
-	rtl_table_release(r);
-
-	info->tagged_ports = u;
-	info->tagged_ports = (info->tagged_ports << 21) | ((v >> 11) & 0x1fffff);
-	info->profile_id = w >> 30 | ((v & 1) << 2);
-	info->hash_mc_fid = !!(w & BIT(2));
-	info->hash_uc_fid = !!(w & BIT(3));
-	info->fid = (v >> 3) & 0xff;
-
-	// Read UNTAG table (0) via table register 1
-	r = rtl_table_get(RTL8390_TBL_1, 0);
-	rtl_table_read(r, vlan);
-	u = sw_r32(rtl_table_data(r, 0));
-	v = sw_r32(rtl_table_data(r, 1));
-	rtl_table_release(r);
-
-	info->untagged_ports = u;
-	info->untagged_ports = (info->untagged_ports << 21) | ((v >> 11) & 0x1fffff);
-}
-
-static void rtl839x_vlan_set_tagged(u32 vlan, struct rtl838x_vlan_info *info)
-{
-	u32 u, v, w;
-	// Access VLAN table (0) via register 0
-	struct table_reg *r = rtl_table_get(RTL8390_TBL_0, 0);
-
-	u = info->tagged_ports >> 21;
-	v = info->tagged_ports << 11;
-	v |= ((u32)info->fid) << 3;
-	v |= info->hash_uc_fid ? BIT(2) : 0;
-	v |= info->hash_mc_fid ? BIT(1) : 0;
-	v |= (info->profile_id & 0x4) ? 1 : 0;
-	w = ((u32)(info->profile_id & 3)) << 30;
-
-	sw_w32(u, rtl_table_data(r, 0));
-	sw_w32(v, rtl_table_data(r, 1));
-	sw_w32(w, rtl_table_data(r, 2));
-
-	rtl_table_write(r, vlan);
-	rtl_table_release(r);
-}
-
-static void rtl839x_vlan_set_untagged(u32 vlan, u64 portmask)
-{
-	u32 u, v;
-
-	// Access UNTAG table (0) via table register 1
-	struct table_reg *r = rtl_table_get(RTL8390_TBL_1, 0);
-
-	u = portmask >> 21;
-	v = portmask << 11;
-
-	sw_w32(u, rtl_table_data(r, 0));
-	sw_w32(v, rtl_table_data(r, 1));
-	rtl_table_write(r, vlan);
-
-	rtl_table_release(r);
-}
-
-/* Sets the L2 forwarding to be based on either the inner VLAN tag or the outer
- */
-static void rtl839x_vlan_fwd_on_inner(int port, bool is_set)
-{
-	if (is_set)
-		rtl839x_mask_port_reg_be(BIT_ULL(port), 0ULL, RTL839X_VLAN_PORT_FWD);
-	else
-		rtl839x_mask_port_reg_be(0ULL, BIT_ULL(port), RTL839X_VLAN_PORT_FWD);
-}
-
-/*
- * Hash seed is vid (actually rvid) concatenated with the MAC address
- */
-static u64 rtl839x_l2_hash_seed(u64 mac, u32 vid)
-{
-	u64 v = vid;
-
-	v <<= 48;
-	v |= mac;
-
-	return v;
-}
-
-/*
- * Applies the same hash algorithm as the one used currently by the ASIC to the seed
- * and returns a key into the L2 hash table
- */
-static u32 rtl839x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed)
-{
-	u32 h1, h2, h;
-
-	if (sw_r32(priv->r->l2_ctrl_0) & 1) {
-		h1 = (u32) (((seed >> 60) & 0x3f) ^ ((seed >> 54) & 0x3f)
-				^ ((seed >> 36) & 0x3f) ^ ((seed >> 30) & 0x3f)
-				^ ((seed >> 12) & 0x3f) ^ ((seed >> 6) & 0x3f));
-		h2 = (u32) (((seed >> 48) & 0x3f) ^ ((seed >> 42) & 0x3f)
-				^ ((seed >> 24) & 0x3f) ^ ((seed >> 18) & 0x3f)
-				^ (seed & 0x3f));
-		h = (h1 << 6) | h2;
-	} else {
-		h = (seed >> 60)
-			^ ((((seed >> 48) & 0x3f) << 6) | ((seed >> 54) & 0x3f))
-			^ ((seed >> 36) & 0xfff) ^ ((seed >> 24) & 0xfff)
-			^ ((seed >> 12) & 0xfff) ^ (seed & 0xfff);
-	}
-
-	return h;
-}
-
-static inline int rtl839x_mac_force_mode_ctrl(int p)
-{
-	return RTL839X_MAC_FORCE_MODE_CTRL + (p << 2);
-}
-
-static inline int rtl839x_mac_port_ctrl(int p)
-{
-	return RTL839X_MAC_PORT_CTRL(p);
-}
-
-static inline int rtl839x_l2_port_new_salrn(int p)
-{
-	return RTL839X_L2_PORT_NEW_SALRN(p);
-}
-
-static inline int rtl839x_l2_port_new_sa_fwd(int p)
-{
-	return RTL839X_L2_PORT_NEW_SA_FWD(p);
-}
-
-static inline int rtl839x_mac_link_spd_sts(int p)
-{
-	return RTL839X_MAC_LINK_SPD_STS(p);
-}
-
-static inline int rtl839x_trk_mbr_ctr(int group)
-{
-	return RTL839X_TRK_MBR_CTR + (group << 3);
-}
-
-static void rtl839x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e)
-{
-	/* Table contains different entry types, we need to identify the right one:
-	 * Check for MC entries, first
-	 */
-	e->is_ip_mc = !!(r[2] & BIT(31));
-	e->is_ipv6_mc = !!(r[2] & BIT(30));
-	e->type = L2_INVALID;
-	if (!e->is_ip_mc && !e->is_ipv6_mc) {
-		e->mac[0] = (r[0] >> 12);
-		e->mac[1] = (r[0] >> 4);
-		e->mac[2] = ((r[1] >> 28) | (r[0] << 4));
-		e->mac[3] = (r[1] >> 20);
-		e->mac[4] = (r[1] >> 12);
-		e->mac[5] = (r[1] >> 4);
-
-		e->vid = (r[2] >> 4) & 0xfff;
-		e->rvid = (r[0] >> 20) & 0xfff;
-
-		/* Is it a unicast entry? check multicast bit */
-		if (!(e->mac[0] & 1)) {
-			e->is_static = !!((r[2] >> 18) & 1);
-			e->port = (r[2] >> 24) & 0x3f;
-			e->block_da = !!(r[2] & (1 << 19));
-			e->block_sa = !!(r[2] & (1 << 20));
-			e->suspended = !!(r[2] & (1 << 17));
-			e->next_hop = !!(r[2] & (1 << 16));
-			if (e->next_hop) {
-				pr_debug("Found next hop entry, need to read data\n");
-				e->nh_vlan_target = !!(r[2] & BIT(15));
-				e->nh_route_id = (r[2] >> 4) & 0x1ff;
-				e->vid = e->rvid;
-			}
-			e->age = (r[2] >> 21) & 3;
-			e->valid = true;
-			if (!(r[2] & 0xc0fd0000)) /* Check for valid entry */
-				e->valid = false;
-			else
-				e->type = L2_UNICAST;
-		} else {
-			e->valid = true;
-			e->type = L2_MULTICAST;
-			e->mc_portmask_index = (r[2] >> 6) & 0xfff;
-			e->vid = e->rvid;
-		}
-	} else { // IPv4 and IPv6 multicast
-		e->vid = e->rvid = (r[0] << 20) & 0xfff;
-		e->mc_gip = r[1];
-		e->mc_portmask_index = (r[2] >> 6) & 0xfff;
-	}
-	if (e->is_ip_mc) {
-		e->valid = true;
-		e->type = IP4_MULTICAST;
-	}
-	if (e->is_ipv6_mc) {
-		e->valid = true;
-		e->type = IP6_MULTICAST;
-	}
-	// pr_info("%s: vid %d, rvid: %d\n", __func__, e->vid, e->rvid);
-}
-
-/*
- * Fills the 3 SoC table registers r[] with the information in the rtl838x_l2_entry
- */
-static void rtl839x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e)
-{
-	if (!e->valid) {
-		r[0] = r[1] = r[2] = 0;
-		return;
-	}
-
-	r[2] = e->is_ip_mc ? BIT(31) : 0;
-	r[2] |= e->is_ipv6_mc ? BIT(30) : 0;
-
-	if (!e->is_ip_mc  && !e->is_ipv6_mc) {
-		r[0] = ((u32)e->mac[0]) << 12;
-		r[0] |= ((u32)e->mac[1]) << 4;
-		r[0] |= ((u32)e->mac[2]) >> 4;
-		r[1] = ((u32)e->mac[2]) << 28;
-		r[1] |= ((u32)e->mac[3]) << 20;
-		r[1] |= ((u32)e->mac[4]) << 12;
-		r[1] |= ((u32)e->mac[5]) << 4;
-
-		if (!(e->mac[0] & 1)) { // Not multicast
-			r[2] |= e->is_static ? BIT(18) : 0;
-			r[0] |= ((u32)e->rvid) << 20;
-			r[2] |= e->port << 24;
-			r[2] |= e->block_da ? BIT(19) : 0;
-			r[2] |= e->block_sa ? BIT(20) : 0;
-			r[2] |= e->suspended ? BIT(17) : 0;
-			r[2] |= ((u32)e->age) << 21;
-			if (e->next_hop) {
-				r[2] |= BIT(16);
-				r[2] |= e->nh_vlan_target ? BIT(15) : 0;
-				r[2] |= (e->nh_route_id & 0x7ff) << 4;
-			} else {
-				r[2] |= e->vid << 4;
-			}
-			pr_debug("Write L2 NH: %08x %08x %08x\n", r[0], r[1], r[2]);
-		} else {  // L2 Multicast
-			r[0] |= ((u32)e->rvid) << 20;
-			r[2] |= ((u32)e->mc_portmask_index) << 6;
-		}
-	} else { // IPv4 or IPv6 MC entry
-		r[0] = ((u32)e->rvid) << 20;
-		r[1] = e->mc_gip;
-		r[2] |= ((u32)e->mc_portmask_index) << 6;
-	}
-}
-
-/*
- * Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table
- * hash is the id of the bucket and pos is the position of the entry in that bucket
- * The data read from the SoC is filled into rtl838x_l2_entry
- */
-static u64 rtl839x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e)
-{
-	u32 r[3];
-	struct table_reg *q = rtl_table_get(RTL8390_TBL_L2, 0);
-	u32 idx = (0 << 14) | (hash << 2) | pos; // Search SRAM, with hash and at pos in bucket
-	int i;
-
-	rtl_table_read(q, idx);
-	for (i= 0; i < 3; i++)
-		r[i] = sw_r32(rtl_table_data(q, i));
-
-	rtl_table_release(q);
-
-	rtl839x_fill_l2_entry(r, e);
-	if (!e->valid)
-		return 0;
-
-	return rtl839x_l2_hash_seed(ether_addr_to_u64(&e->mac[0]), e->rvid);
-}
-
-static void rtl839x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e)
-{
-	u32 r[3];
-	struct table_reg *q = rtl_table_get(RTL8390_TBL_L2, 0);
-	int i;
-
-	u32 idx = (0 << 14) | (hash << 2) | pos; // Access SRAM, with hash and at pos in bucket
-
-	rtl839x_fill_l2_row(r, e);
-
-	for (i= 0; i < 3; i++)
-		sw_w32(r[i], rtl_table_data(q, i));
-
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-}
-
-static u64 rtl839x_read_cam(int idx, struct rtl838x_l2_entry *e)
-{
-	u32 r[3];
-	struct table_reg *q = rtl_table_get(RTL8390_TBL_L2, 1); // Access L2 Table 1
-	int i;
-
-	rtl_table_read(q, idx);
-	for (i= 0; i < 3; i++)
-		r[i] = sw_r32(rtl_table_data(q, i));
-
-	rtl_table_release(q);
-
-	rtl839x_fill_l2_entry(r, e);
-	if (!e->valid)
-		return 0;
-
-	pr_debug("Found in CAM: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]);
-
-	// Return MAC with concatenated VID ac concatenated ID
-	return rtl839x_l2_hash_seed(ether_addr_to_u64(&e->mac[0]), e->rvid);
-}
-
-static void rtl839x_write_cam(int idx, struct rtl838x_l2_entry *e)
-{
-	u32 r[3];
-	struct table_reg *q = rtl_table_get(RTL8390_TBL_L2, 1); // Access L2 Table 1
-	int i;
-
-	rtl839x_fill_l2_row(r, e);
-
-	for (i= 0; i < 3; i++)
-		sw_w32(r[i], rtl_table_data(q, i));
-
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-}
-
-static u64 rtl839x_read_mcast_pmask(int idx)
-{
-	u64 portmask;
-	// Read MC_PMSK (2) via register RTL8390_TBL_L2
-	struct table_reg *q = rtl_table_get(RTL8390_TBL_L2, 2);
-
-	rtl_table_read(q, idx);
-	portmask = sw_r32(rtl_table_data(q, 0));
-	portmask <<= 32;
-	portmask |= sw_r32(rtl_table_data(q, 1));
-	portmask >>= 11;  // LSB is bit 11 in data registers
-	rtl_table_release(q);
-
-	return portmask;
-}
-
-static void rtl839x_write_mcast_pmask(int idx, u64 portmask)
-{
-	// Access MC_PMSK (2) via register RTL8380_TBL_L2
-	struct table_reg *q = rtl_table_get(RTL8390_TBL_L2, 2);
-
-	portmask <<= 11; // LSB is bit 11 in data registers
-	sw_w32((u32)(portmask >> 32), rtl_table_data(q, 0));
-	sw_w32((u32)((portmask & 0xfffff800)), rtl_table_data(q, 1));
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-}
-
-static void rtl839x_vlan_profile_setup(int profile)
-{
-	u32 p[2];
-	u32 pmask_id = UNKNOWN_MC_PMASK;
-
-	p[0] = pmask_id; // Use portmaks 0xfff for unknown IPv6 MC flooding
-	// Enable L2 Learning BIT 0, portmask UNKNOWN_MC_PMASK for IP/L2-MC traffic flooding
-	p[1] = 1 | pmask_id << 1 | pmask_id << 13;
-
-	sw_w32(p[0], RTL839X_VLAN_PROFILE(profile));
-	sw_w32(p[1], RTL839X_VLAN_PROFILE(profile) + 4);
-
-	rtl839x_write_mcast_pmask(UNKNOWN_MC_PMASK, 0x001fffffffffffff);
-}
-
-u64 rtl839x_traffic_get(int source)
-{
-	return rtl839x_get_port_reg_be(rtl839x_port_iso_ctrl(source));
-}
-
-void rtl839x_traffic_set(int source, u64 dest_matrix)
-{
-	rtl839x_set_port_reg_be(dest_matrix, rtl839x_port_iso_ctrl(source));
-}
-
-void rtl839x_traffic_enable(int source, int dest)
-{
-	rtl839x_mask_port_reg_be(0, BIT_ULL(dest), rtl839x_port_iso_ctrl(source));
-}
-
-void rtl839x_traffic_disable(int source, int dest)
-{
-	rtl839x_mask_port_reg_be(BIT_ULL(dest), 0, rtl839x_port_iso_ctrl(source));
-}
-
-static void rtl839x_l2_learning_setup(void)
-{
-	/* Set portmask for broadcast (offset bit 12) and unknown unicast (offset 0)
-	 * address flooding to the reserved entry in the portmask table used
-	 * also for multicast flooding */
-	sw_w32(UNKNOWN_MC_PMASK << 12 | UNKNOWN_MC_PMASK, RTL839X_L2_FLD_PMSK);
-
-	// Limit learning to maximum: 32k entries, after that just flood (bits 0-1)
-	sw_w32((0x7fff << 2) | 0, RTL839X_L2_LRN_CONSTRT);
-
-	// Do not trap ARP packets to CPU_PORT
-	sw_w32(0, RTL839X_SPCL_TRAP_ARP_CTRL);
-}
-
-static void rtl839x_enable_learning(int port, bool enable)
-{
-	// Limit learning to maximum: 32k entries
-
-	sw_w32_mask(0x7fff << 2, enable ? (0x7fff << 2) : 0,
-		    RTL839X_L2_PORT_LRN_CONSTRT + (port << 2));
-}
-
-static void rtl839x_enable_flood(int port, bool enable)
-{
-	/*
-	 * 0: Forward
-	 * 1: Disable
-	 * 2: to CPU
-	 * 3: Copy to CPU
-	 */
-	sw_w32_mask(0x3, enable ? 0 : 1,
-		    RTL839X_L2_PORT_LRN_CONSTRT + (port << 2));
-}
-
-static void rtl839x_enable_mcast_flood(int port, bool enable)
-{
-
-}
-
-static void rtl839x_enable_bcast_flood(int port, bool enable)
-{
-
-}
-
-static void rtl839x_set_static_move_action(int port, bool forward)
-{
-	int shift = MV_ACT_PORT_SHIFT(port);
-	u32 val = forward ? MV_ACT_FORWARD : MV_ACT_DROP;
-
-	sw_w32_mask(MV_ACT_MASK << shift, val << shift,
-		    RTL839X_L2_PORT_STATIC_MV_ACT(port));
-}
-
-irqreturn_t rtl839x_switch_irq(int irq, void *dev_id)
-{
-	struct dsa_switch *ds = dev_id;
-	u32 status = sw_r32(RTL839X_ISR_GLB_SRC);
-	u64 ports = rtl839x_get_port_reg_le(RTL839X_ISR_PORT_LINK_STS_CHG);
-	u64 link;
-	int i;
-
-	/* Clear status */
-	rtl839x_set_port_reg_le(ports, RTL839X_ISR_PORT_LINK_STS_CHG);
-	pr_debug("RTL8390 Link change: status: %x, ports %llx\n", status, ports);
-
-	for (i = 0; i < RTL839X_CPU_PORT; i++) {
-		if (ports & BIT_ULL(i)) {
-			link = rtl839x_get_port_reg_le(RTL839X_MAC_LINK_STS);
-			if (link & BIT_ULL(i))
-				dsa_port_phylink_mac_change(ds, i, true);
-			else
-				dsa_port_phylink_mac_change(ds, i, false);
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-// TODO: unused
-int rtl8390_sds_power(int mac, int val)
-{
-	u32 offset = (mac == 48) ? 0x0 : 0x100;
-	u32 mode = val ? 0 : 1;
-
-	pr_debug("In %s: mac %d, set %d\n", __func__, mac, val);
-
-	if ((mac != 48) && (mac != 49)) {
-		pr_err("%s: not an SFP port: %d\n", __func__, mac);
-		return -1;
-	}
-
-	// Set bit 1003. 1000 starts at 7c
-	sw_w32_mask(BIT(11), mode << 11, RTL839X_SDS12_13_PWR0 + offset);
-
-	return 0;
-}
-
-static int rtl839x_smi_wait_op(int timeout)
-{
-	int ret = 0;
-	u32 val;
-
-	ret = readx_poll_timeout(sw_r32, RTL839X_PHYREG_ACCESS_CTRL,
-				 val, !(val & 0x1), 20, timeout);
-	if (ret)
-		pr_err("%s: timeout\n", __func__);
-
-	return ret;
-}
-
-int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val)
-{
-	u32 v;
-	int err = 0;
-
-	if (port > 63 || page > 4095 || reg > 31)
-		return -ENOTSUPP;
-
-	// Take bug on RTL839x Rev <= C into account
-	if (port >= RTL839X_CPU_PORT)
-		return -EIO;
-
-	mutex_lock(&smi_lock);
-
-	sw_w32_mask(0xffff0000, port << 16, RTL839X_PHYREG_DATA_CTRL);
-	v = reg << 5 | page << 10 | ((page == 0x1fff) ? 0x1f : 0) << 23;
-	sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL);
-
-	sw_w32(0x1ff, RTL839X_PHYREG_CTRL);
-
-	v |= 1;
-	sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL);
-
-	err = rtl839x_smi_wait_op(100000);
-	if (err)
-		goto errout;
-
-	*val = sw_r32(RTL839X_PHYREG_DATA_CTRL) & 0xffff;
-
-errout:
-	mutex_unlock(&smi_lock);
-	return err;
-}
-
-int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val)
-{
-	u32 v;
-	int err = 0;
-
-	val &= 0xffff;
-	if (port > 63 || page > 4095 || reg > 31)
-		return -ENOTSUPP;
-
-	// Take bug on RTL839x Rev <= C into account
-	if (port >= RTL839X_CPU_PORT)
-		return -EIO;
-
-	mutex_lock(&smi_lock);
-
-	// Set PHY to access
-	rtl839x_set_port_reg_le(BIT_ULL(port), RTL839X_PHYREG_PORT_CTRL);
-
-	sw_w32_mask(0xffff0000, val << 16, RTL839X_PHYREG_DATA_CTRL);
-
-	v = reg << 5 | page << 10 | ((page == 0x1fff) ? 0x1f : 0) << 23;
-	sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL);
-
-	sw_w32(0x1ff, RTL839X_PHYREG_CTRL);
-
-	v |= BIT(3) | 1; /* Write operation and execute */
-	sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL);
-
-	err = rtl839x_smi_wait_op(100000);
-	if (err)
-		goto errout;
-
-	if (sw_r32(RTL839X_PHYREG_ACCESS_CTRL) & 0x2)
-		err = -EIO;
-
-errout:
-	mutex_unlock(&smi_lock);
-	return err;
-}
-
-/*
- * Read an mmd register of the PHY
- */
-int rtl839x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val)
-{
-	int err = 0;
-	u32 v;
-
-	// Take bug on RTL839x Rev <= C into account
-	if (port >= RTL839X_CPU_PORT)
-		return -EIO;
-
-	mutex_lock(&smi_lock);
-
-	// Set PHY to access
-	sw_w32_mask(0xffff << 16, port << 16, RTL839X_PHYREG_DATA_CTRL);
-
-	// Set MMD device number and register to write to
-	sw_w32(devnum << 16 | (regnum & 0xffff), RTL839X_PHYREG_MMD_CTRL);
-
-	v = BIT(2) | BIT(0); // MMD-access | EXEC
-	sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL);
-
-	err = rtl839x_smi_wait_op(100000);
-	if (err)
-		goto errout;
-
-	// There is no error-checking via BIT 1 of v, as it does not seem to be set correctly
-	*val = (sw_r32(RTL839X_PHYREG_DATA_CTRL) & 0xffff);
-	pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, *val, err);
-
-errout:
-	mutex_unlock(&smi_lock);
-	return err;
-}
-
-/*
- * Write to an mmd register of the PHY
- */
-int rtl839x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val)
-{
-	int err = 0;
-	u32 v;
-
-	// Take bug on RTL839x Rev <= C into account
-	if (port >= RTL839X_CPU_PORT)
-		return -EIO;
-
-	mutex_lock(&smi_lock);
-
-	// Set PHY to access
-	rtl839x_set_port_reg_le(BIT_ULL(port), RTL839X_PHYREG_PORT_CTRL);
-
-	// Set data to write
-	sw_w32_mask(0xffff << 16, val << 16, RTL839X_PHYREG_DATA_CTRL);
-
-	// Set MMD device number and register to write to
-	sw_w32(devnum << 16 | (regnum & 0xffff), RTL839X_PHYREG_MMD_CTRL);
-
-	v = BIT(3) | BIT(2) | BIT(0); // WRITE | MMD-access | EXEC
-	sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL);
-
-	err = rtl839x_smi_wait_op(100000);
-	if (err)
-		goto errout;
-
-	pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, val, err);
-
-errout:
-	mutex_unlock(&smi_lock);
-	return err;
-}
-
-void rtl8390_get_version(struct rtl838x_switch_priv *priv)
-{
-	u32 info, model;
-
-	sw_w32_mask(0xf << 28, 0xa << 28, RTL839X_CHIP_INFO);
-	info = sw_r32(RTL839X_CHIP_INFO);
-
-	model = sw_r32(RTL839X_MODEL_NAME_INFO);
-	priv->version = RTL8390_VERSION_A + ((model & 0x3f) >> 1);
-
-	pr_info("RTL839X Chip-Info: %x, version %c\n", info, priv->version);
-}
-
-void rtl839x_vlan_profile_dump(int profile)
-{
-	u32 p[2];
-
-	if (profile < 0 || profile > 7)
-		return;
-
-	p[0] = sw_r32(RTL839X_VLAN_PROFILE(profile));
-	p[1] = sw_r32(RTL839X_VLAN_PROFILE(profile) + 4);
-
-	pr_info("VLAN profile %d: L2 learning: %d, UNKN L2MC FLD PMSK %d, \
-		UNKN IPMC FLD PMSK %d, UNKN IPv6MC FLD PMSK: %d",
-		profile, p[1] & 1, (p[1] >> 1) & 0xfff, (p[1] >> 13) & 0xfff,
-		(p[0]) & 0xfff);
-	pr_info("VLAN profile %d: raw %08x, %08x\n", profile, p[0], p[1]);
-}
-
-static void rtl839x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
-{
-	int i;
-	u32 cmd = 1 << 16 /* Execute cmd */
-		| 0 << 15 /* Read */
-		| 5 << 12 /* Table type 0b101 */
-		| (msti & 0xfff);
-	priv->r->exec_tbl0_cmd(cmd);
-
-	for (i = 0; i < 4; i++)
-		port_state[i] = sw_r32(priv->r->tbl_access_data_0(i));
-}
-
-static void rtl839x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
-{
-	int i;
-	u32 cmd = 1 << 16 /* Execute cmd */
-		| 1 << 15 /* Write */
-		| 5 << 12 /* Table type 0b101 */
-		| (msti & 0xfff);
-	for (i = 0; i < 4; i++)
-		sw_w32(port_state[i], priv->r->tbl_access_data_0(i));
-	priv->r->exec_tbl0_cmd(cmd);
-}
-
-/*
- * Enables or disables the EEE/EEEP capability of a port
- */
-void rtl839x_port_eee_set(struct rtl838x_switch_priv *priv, int port, bool enable)
-{
-	u32 v;
-
-	// This works only for Ethernet ports, and on the RTL839X, ports above 47 are SFP
-	if (port >= 48)
-		return;
-
-	enable = true;
-	pr_debug("In %s: setting port %d to %d\n", __func__, port, enable);
-	v = enable ? 0xf : 0x0;
-
-	// Set EEE for 100, 500, 1000MBit and 10GBit
-	sw_w32_mask(0xf << 8, v << 8, rtl839x_mac_force_mode_ctrl(port));
-
-	// Set TX/RX EEE state
-	v = enable ? 0x3 : 0x0;
-	sw_w32(v, RTL839X_EEE_CTRL(port));
-
-	priv->ports[port].eee_enabled = enable;
-}
-
-/*
- * Get EEE own capabilities and negotiation result
- */
-int rtl839x_eee_port_ability(struct rtl838x_switch_priv *priv, struct ethtool_eee *e, int port)
-{
-	u64 link, a;
-
-	if (port >= 48)
-		return 0;
-
-	link = rtl839x_get_port_reg_le(RTL839X_MAC_LINK_STS);
-	if (!(link & BIT_ULL(port)))
-		return 0;
-
-	if (sw_r32(rtl839x_mac_force_mode_ctrl(port)) & BIT(8))
-		e->advertised |= ADVERTISED_100baseT_Full;
-
-	if (sw_r32(rtl839x_mac_force_mode_ctrl(port)) & BIT(10))
-		e->advertised |= ADVERTISED_1000baseT_Full;
-
-	a = rtl839x_get_port_reg_le(RTL839X_MAC_EEE_ABLTY);
-	pr_info("Link partner: %016llx\n", a);
-	if (rtl839x_get_port_reg_le(RTL839X_MAC_EEE_ABLTY) & BIT_ULL(port)) {
-		e->lp_advertised = ADVERTISED_100baseT_Full;
-		e->lp_advertised |= ADVERTISED_1000baseT_Full;
-		return 1;
-	}
-
-	return 0;
-}
-
-static void rtl839x_init_eee(struct rtl838x_switch_priv *priv, bool enable)
-{
-	int i;
-
-	pr_info("Setting up EEE, state: %d\n", enable);
-
-	// Set wake timer for TX and pause timer both to 0x21
-	sw_w32_mask(0xff << 20| 0xff, 0x21 << 20| 0x21, RTL839X_EEE_TX_TIMER_GELITE_CTRL);
-	// Set pause wake timer for GIGA-EEE to 0x11
-	sw_w32_mask(0xff << 20, 0x11 << 20, RTL839X_EEE_TX_TIMER_GIGA_CTRL);
-	// Set pause wake timer for 10GBit ports to 0x11
-	sw_w32_mask(0xff << 20, 0x11 << 20, RTL839X_EEE_TX_TIMER_10G_CTRL);
-
-	// Setup EEE on all ports
-	for (i = 0; i < priv->cpu_port; i++) {
-		if (priv->ports[i].phy)
-			rtl839x_port_eee_set(priv, i, enable);
-	}
-	priv->eee_enabled = enable;
-}
-
-static void rtl839x_pie_lookup_enable(struct rtl838x_switch_priv *priv, int index)
-{
-	int block = index / PIE_BLOCK_SIZE;
-
-	sw_w32_mask(0, BIT(block), RTL839X_ACL_BLK_LOOKUP_CTRL);
-}
-
-/*
- * Delete a range of Packet Inspection Engine rules
- */
-static int rtl839x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from, int index_to)
-{
-	u32 v = (index_from << 1)| (index_to << 13 ) | BIT(0);
-
-	pr_debug("%s: from %d to %d\n", __func__, index_from, index_to);
-	mutex_lock(&priv->reg_mutex);
-
-	// Write from-to and execute bit into control register
-	sw_w32(v, RTL839X_ACL_CLR_CTRL);
-
-	// Wait until command has completed
-	do {
-	} while (sw_r32(RTL839X_ACL_CLR_CTRL) & BIT(0));
-
-	mutex_unlock(&priv->reg_mutex);
-	return 0;
-}
-
-/*
- * Reads the intermediate representation of the templated match-fields of the
- * PIE rule in the pie_rule structure and fills in the raw data fields in the
- * raw register space r[].
- * The register space configuration size is identical for the RTL8380/90 and RTL9300,
- * however the RTL9310 has 2 more registers / fields and the physical field-ids are different
- * on all SoCs
- * On the RTL8390 the template mask registers are not word-aligned!
- */
-static void rtl839x_write_pie_templated(u32 r[], struct pie_rule *pr, enum template_field_id t[])
-{
-	int i;
-	enum template_field_id field_type;
-	u16 data, data_m;
-
-	for (i = 0; i < N_FIXED_FIELDS; i++) {
-		field_type = t[i];
-		data = data_m = 0;
-
-		switch (field_type) {
-		case TEMPLATE_FIELD_SPM0:
-			data = pr->spm;
-			data_m = pr->spm_m;
-			break;
-		case TEMPLATE_FIELD_SPM1:
-			data = pr->spm >> 16;
-			data_m = pr->spm_m >> 16;
-			break;
-		case TEMPLATE_FIELD_SPM2:
-			data = pr->spm >> 32;
-			data_m = pr->spm_m >> 32;
-			break;
-		case TEMPLATE_FIELD_SPM3:
-			data = pr->spm >> 48;
-			data_m = pr->spm_m >> 48;
-			break;
-		case TEMPLATE_FIELD_OTAG:
-			data = pr->otag;
-			data_m = pr->otag_m;
-			break;
-		case TEMPLATE_FIELD_SMAC0:
-			data = pr->smac[4];
-			data = (data << 8) | pr->smac[5];
-			data_m = pr->smac_m[4];
-			data_m = (data_m << 8) | pr->smac_m[5];
-			break;
-		case TEMPLATE_FIELD_SMAC1:
-			data = pr->smac[2];
-			data = (data << 8) | pr->smac[3];
-			data_m = pr->smac_m[2];
-			data_m = (data_m << 8) | pr->smac_m[3];
-			break;
-		case TEMPLATE_FIELD_SMAC2:
-			data = pr->smac[0];
-			data = (data << 8) | pr->smac[1];
-			data_m = pr->smac_m[0];
-			data_m = (data_m << 8) | pr->smac_m[1];
-			break;
-		case TEMPLATE_FIELD_DMAC0:
-			data = pr->dmac[4];
-			data = (data << 8) | pr->dmac[5];
-			data_m = pr->dmac_m[4];
-			data_m = (data_m << 8) | pr->dmac_m[5];
-			break;
-		case TEMPLATE_FIELD_DMAC1:
-			data = pr->dmac[2];
-			data = (data << 8) | pr->dmac[3];
-			data_m = pr->dmac_m[2];
-			data_m = (data_m << 8) | pr->dmac_m[3];
-			break;
-		case TEMPLATE_FIELD_DMAC2:
-			data = pr->dmac[0];
-			data = (data << 8) | pr->dmac[1];
-			data_m = pr->dmac_m[0];
-			data_m = (data_m << 8) | pr->dmac_m[1];
-			break;
-		case TEMPLATE_FIELD_ETHERTYPE:
-			data = pr->ethertype;
-			data_m = pr->ethertype_m;
-			break;
-		case TEMPLATE_FIELD_ITAG:
-			data = pr->itag;
-			data_m = pr->itag_m;
-			break;
-		case TEMPLATE_FIELD_SIP0:
-			if (pr->is_ipv6) {
-				data = pr->sip6.s6_addr16[7];
-				data_m = pr->sip6_m.s6_addr16[7];
-			} else {
-				data = pr->sip;
-				data_m = pr->sip_m;
-			}
-			break;
-		case TEMPLATE_FIELD_SIP1:
-			if (pr->is_ipv6) {
-				data = pr->sip6.s6_addr16[6];
-				data_m = pr->sip6_m.s6_addr16[6];
-			} else {
-				data = pr->sip >> 16;
-				data_m = pr->sip_m >> 16;
-			}
-			break;
-
-		case TEMPLATE_FIELD_SIP2:
-		case TEMPLATE_FIELD_SIP3:
-		case TEMPLATE_FIELD_SIP4:
-		case TEMPLATE_FIELD_SIP5:
-		case TEMPLATE_FIELD_SIP6:
-		case TEMPLATE_FIELD_SIP7:
-			data = pr->sip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)];
-			data_m = pr->sip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)];
-			break;
-
-		case TEMPLATE_FIELD_DIP0:
-			if (pr->is_ipv6) {
-				data = pr->dip6.s6_addr16[7];
-				data_m = pr->dip6_m.s6_addr16[7];
-			} else {
-				data = pr->dip;
-				data_m = pr->dip_m;
-			}
-			break;
-
-		case TEMPLATE_FIELD_DIP1:
-			if (pr->is_ipv6) {
-				data = pr->dip6.s6_addr16[6];
-				data_m = pr->dip6_m.s6_addr16[6];
-			} else {
-				data = pr->dip >> 16;
-				data_m = pr->dip_m >> 16;
-			}
-			break;
-
-		case TEMPLATE_FIELD_DIP2:
-		case TEMPLATE_FIELD_DIP3:
-		case TEMPLATE_FIELD_DIP4:
-		case TEMPLATE_FIELD_DIP5:
-		case TEMPLATE_FIELD_DIP6:
-		case TEMPLATE_FIELD_DIP7:
-			data = pr->dip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)];
-			data_m = pr->dip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)];
-			break;
-
-		case TEMPLATE_FIELD_IP_TOS_PROTO:
-			data = pr->tos_proto;
-			data_m = pr->tos_proto_m;
-			break;
-		case TEMPLATE_FIELD_L4_SPORT:
-			data = pr->sport;
-			data_m = pr->sport_m;
-			break;
-		case TEMPLATE_FIELD_L4_DPORT:
-			data = pr->dport;
-			data_m = pr->dport_m;
-			break;
-		case TEMPLATE_FIELD_ICMP_IGMP:
-			data = pr->icmp_igmp;
-			data_m = pr->icmp_igmp_m;
-			break;
-		default:
-			pr_info("%s: unknown field %d\n", __func__, field_type);
-		}
-
-		// On the RTL8390, the mask fields are not word aligned!
-		if (!(i % 2)) {
-			r[5 - i / 2] = data;
-			r[12 - i / 2] |= ((u32)data_m << 8);
-		} else {
-			r[5 - i / 2] |= ((u32)data) << 16;
-			r[12 - i / 2] |= ((u32)data_m) << 24;
-			r[11 - i / 2] |= ((u32)data_m) >> 8;
-		}
-	}
-}
-
-/*
- * Creates the intermediate representation of the templated match-fields of the
- * PIE rule in the pie_rule structure by reading the raw data fields in the
- * raw register space r[].
- * The register space configuration size is identical for the RTL8380/90 and RTL9300,
- * however the RTL9310 has 2 more registers / fields and the physical field-ids
- * On the RTL8390 the template mask registers are not word-aligned!
- */
-void rtl839x_read_pie_templated(u32 r[], struct pie_rule *pr, enum template_field_id t[])
-{
-	int i;
-	enum template_field_id field_type;
-	u16 data, data_m;
-
-	for (i = 0; i < N_FIXED_FIELDS; i++) {
-		field_type = t[i];
-		if (!(i % 2)) {
-			data = r[5 - i / 2];
-			data_m = r[12 - i / 2];
-		} else {
-			data = r[5 - i / 2] >> 16;
-			data_m = r[12 - i / 2] >> 16;
-		}
-
-		switch (field_type) {
-		case TEMPLATE_FIELD_SPM0:
-			pr->spm = (pr->spn << 16) | data;
-			pr->spm_m = (pr->spn << 16) | data_m;
-			break;
-		case TEMPLATE_FIELD_SPM1:
-			pr->spm = data;
-			pr->spm_m = data_m;
-			break;
-		case TEMPLATE_FIELD_OTAG:
-			pr->otag = data;
-			pr->otag_m = data_m;
-			break;
-		case TEMPLATE_FIELD_SMAC0:
-			pr->smac[4] = data >> 8;
-			pr->smac[5] = data;
-			pr->smac_m[4] = data >> 8;
-			pr->smac_m[5] = data;
-			break;
-		case TEMPLATE_FIELD_SMAC1:
-			pr->smac[2] = data >> 8;
-			pr->smac[3] = data;
-			pr->smac_m[2] = data >> 8;
-			pr->smac_m[3] = data;
-			break;
-		case TEMPLATE_FIELD_SMAC2:
-			pr->smac[0] = data >> 8;
-			pr->smac[1] = data;
-			pr->smac_m[0] = data >> 8;
-			pr->smac_m[1] = data;
-			break;
-		case TEMPLATE_FIELD_DMAC0:
-			pr->dmac[4] = data >> 8;
-			pr->dmac[5] = data;
-			pr->dmac_m[4] = data >> 8;
-			pr->dmac_m[5] = data;
-			break;
-		case TEMPLATE_FIELD_DMAC1:
-			pr->dmac[2] = data >> 8;
-			pr->dmac[3] = data;
-			pr->dmac_m[2] = data >> 8;
-			pr->dmac_m[3] = data;
-			break;
-		case TEMPLATE_FIELD_DMAC2:
-			pr->dmac[0] = data >> 8;
-			pr->dmac[1] = data;
-			pr->dmac_m[0] = data >> 8;
-			pr->dmac_m[1] = data;
-			break;
-		case TEMPLATE_FIELD_ETHERTYPE:
-			pr->ethertype = data;
-			pr->ethertype_m = data_m;
-			break;
-		case TEMPLATE_FIELD_ITAG:
-			pr->itag = data;
-			pr->itag_m = data_m;
-			break;
-		case TEMPLATE_FIELD_SIP0:
-			pr->sip = data;
-			pr->sip_m = data_m;
-			break;
-		case TEMPLATE_FIELD_SIP1:
-			pr->sip = (pr->sip << 16) | data;
-			pr->sip_m = (pr->sip << 16) | data_m;
-			break;
-		case TEMPLATE_FIELD_SIP2:
-			pr->is_ipv6 = true;
-			// Make use of limitiations on the position of the match values
-			ipv6_addr_set(&pr->sip6, pr->sip, r[5 - i / 2],
-				      r[4 - i / 2], r[3 - i / 2]);
-			ipv6_addr_set(&pr->sip6_m, pr->sip_m, r[5 - i / 2],
-				      r[4 - i / 2], r[3 - i / 2]);
-		case TEMPLATE_FIELD_SIP3:
-		case TEMPLATE_FIELD_SIP4:
-		case TEMPLATE_FIELD_SIP5:
-		case TEMPLATE_FIELD_SIP6:
-		case TEMPLATE_FIELD_SIP7:
-			break;
-
-		case TEMPLATE_FIELD_DIP0:
-			pr->dip = data;
-			pr->dip_m = data_m;
-			break;
-
-		case TEMPLATE_FIELD_DIP1:
-			pr->dip = (pr->dip << 16) | data;
-			pr->dip_m = (pr->dip << 16) | data_m;
-			break;
-
-		case TEMPLATE_FIELD_DIP2:
-			pr->is_ipv6 = true;
-			ipv6_addr_set(&pr->dip6, pr->dip, r[5 - i / 2],
-				      r[4 - i / 2], r[3 - i / 2]);
-			ipv6_addr_set(&pr->dip6_m, pr->dip_m, r[5 - i / 2],
-				      r[4 - i / 2], r[3 - i / 2]);
-		case TEMPLATE_FIELD_DIP3:
-		case TEMPLATE_FIELD_DIP4:
-		case TEMPLATE_FIELD_DIP5:
-		case TEMPLATE_FIELD_DIP6:
-		case TEMPLATE_FIELD_DIP7:
-			break;
-		case TEMPLATE_FIELD_IP_TOS_PROTO:
-			pr->tos_proto = data;
-			pr->tos_proto_m = data_m;
-			break;
-		case TEMPLATE_FIELD_L4_SPORT:
-			pr->sport = data;
-			pr->sport_m = data_m;
-			break;
-		case TEMPLATE_FIELD_L4_DPORT:
-			pr->dport = data;
-			pr->dport_m = data_m;
-			break;
-		case TEMPLATE_FIELD_ICMP_IGMP:
-			pr->icmp_igmp = data;
-			pr->icmp_igmp_m = data_m;
-			break;
-		default:
-			pr_info("%s: unknown field %d\n", __func__, field_type);
-		}
-	}
-}
-
-static void rtl839x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr)
-{
-	pr->spmmask_fix = (r[6] >> 30) & 0x3;
-	pr->spn = (r[6] >> 24) & 0x3f;
-	pr->mgnt_vlan = (r[6] >> 23) & 1;
-	pr->dmac_hit_sw = (r[6] >> 22) & 1;
-	pr->not_first_frag = (r[6] >> 21) & 1;
-	pr->frame_type_l4 = (r[6] >> 18) & 7;
-	pr->frame_type = (r[6] >> 16) & 3;
-	pr->otag_fmt = (r[6] >> 15) & 1;
-	pr->itag_fmt = (r[6] >> 14) & 1;
-	pr->otag_exist = (r[6] >> 13) & 1;
-	pr->itag_exist = (r[6] >> 12) & 1;
-	pr->frame_type_l2 = (r[6] >> 10) & 3;
-	pr->tid = (r[6] >> 8) & 3;
-
-	pr->spmmask_fix_m = (r[12] >> 6) & 0x3;
-	pr->spn_m = r[12]  & 0x3f;
-	pr->mgnt_vlan_m = (r[13] >> 31) & 1;
-	pr->dmac_hit_sw_m = (r[13] >> 30) & 1;
-	pr->not_first_frag_m = (r[13] >> 29) & 1;
-	pr->frame_type_l4_m = (r[13] >> 26) & 7;
-	pr->frame_type_m = (r[13] >> 24) & 3;
-	pr->otag_fmt_m = (r[13] >> 23) & 1;
-	pr->itag_fmt_m = (r[13] >> 22) & 1;
-	pr->otag_exist_m = (r[13] >> 21) & 1;
-	pr->itag_exist_m = (r[13] >> 20) & 1;
-	pr->frame_type_l2_m = (r[13] >> 18) & 3;
-	pr->tid_m = (r[13] >> 16) & 3;
-
-	pr->valid = r[13] & BIT(15);
-	pr->cond_not = r[13] & BIT(14);
-	pr->cond_and1 = r[13] & BIT(13);
-	pr->cond_and2 = r[13] & BIT(12);
-}
-
-static void rtl839x_write_pie_fixed_fields(u32 r[],  struct pie_rule *pr)
-{
-	r[6] = ((u32) (pr->spmmask_fix & 0x3)) << 30;
-	r[6] |= ((u32) (pr->spn & 0x3f)) << 24;
-	r[6] |= pr->mgnt_vlan ? BIT(23) : 0;
-	r[6] |= pr->dmac_hit_sw ? BIT(22) : 0;
-	r[6] |= pr->not_first_frag ? BIT(21) : 0;
-	r[6] |= ((u32) (pr->frame_type_l4 & 0x7)) << 18;
-	r[6] |= ((u32) (pr->frame_type & 0x3)) << 16;
-	r[6] |= pr->otag_fmt ? BIT(15) : 0;
-	r[6] |= pr->itag_fmt ? BIT(14) : 0;
-	r[6] |= pr->otag_exist ? BIT(13) : 0;
-	r[6] |= pr->itag_exist ? BIT(12) : 0;
-	r[6] |= ((u32) (pr->frame_type_l2 & 0x3)) << 10;
-	r[6] |= ((u32) (pr->tid & 0x3)) << 8;
-
-	r[12] |= ((u32) (pr->spmmask_fix_m & 0x3)) << 6;
-	r[12] |= (u32) (pr->spn_m & 0x3f);
-	r[13] |= pr->mgnt_vlan_m ? BIT(31) : 0;
-	r[13] |= pr->dmac_hit_sw_m ? BIT(30) : 0;
-	r[13] |= pr->not_first_frag_m ? BIT(29) : 0;
-	r[13] |= ((u32) (pr->frame_type_l4_m & 0x7)) << 26;
-	r[13] |= ((u32) (pr->frame_type_m & 0x3)) << 24;
-	r[13] |= pr->otag_fmt_m ? BIT(23) : 0;
-	r[13] |= pr->itag_fmt_m ? BIT(22) : 0;
-	r[13] |= pr->otag_exist_m ? BIT(21) : 0;
-	r[13] |= pr->itag_exist_m ? BIT(20) : 0;
-	r[13] |= ((u32) (pr->frame_type_l2_m & 0x3)) << 18;
-	r[13] |= ((u32) (pr->tid_m & 0x3)) << 16;
-
-	r[13] |= pr->valid ? BIT(15) : 0;
-	r[13] |= pr->cond_not ? BIT(14) : 0;
-	r[13] |= pr->cond_and1 ? BIT(13) : 0;
-	r[13] |= pr->cond_and2 ? BIT(12) : 0;
-}
-
-static void rtl839x_write_pie_action(u32 r[],  struct pie_rule *pr)
-{
-	if (pr->drop) {
-		r[13] |= 0x9;	// Set ACT_MASK_FWD & FWD_ACT = DROP
-		r[13] |= BIT(3);
-	} else {
-		r[13] |= pr->fwd_sel ? BIT(3) : 0;
-		r[13] |= pr->fwd_act;
-	}
-	r[13] |= pr->bypass_sel ? BIT(11) : 0;
-	r[13] |= pr->mpls_sel ? BIT(10) : 0;
-	r[13] |= pr->nopri_sel ? BIT(9) : 0;
-	r[13] |= pr->ovid_sel ? BIT(8) : 0;
-	r[13] |= pr->ivid_sel ? BIT(7) : 0;
-	r[13] |= pr->meter_sel ? BIT(6) : 0;
-	r[13] |= pr->mir_sel ? BIT(5) : 0;
-	r[13] |= pr->log_sel ? BIT(4) : 0;
-
-	r[14] |= ((u32)(pr->fwd_data & 0x3fff)) << 18;
-	r[14] |= pr->log_octets ? BIT(17) : 0;
-	r[14] |= ((u32)(pr->log_data & 0x7ff)) << 4;
-	r[14] |= (pr->mir_data & 0x3) << 3;
-	r[14] |= ((u32)(pr->meter_data >> 7)) & 0x7;
-	r[15] |= (u32)(pr->meter_data) << 26;
-	r[15] |= ((u32)(pr->ivid_act) << 23) & 0x3;
-	r[15] |= ((u32)(pr->ivid_data) << 9) & 0xfff;
-	r[15] |= ((u32)(pr->ovid_act) << 6) & 0x3;
-	r[15] |= ((u32)(pr->ovid_data) >> 4) & 0xff;
-	r[16] |= ((u32)(pr->ovid_data) & 0xf) << 28;
-	r[16] |= ((u32)(pr->nopri_data) & 0x7) << 20;
-	r[16] |= ((u32)(pr->mpls_act) & 0x7) << 20;
-	r[16] |= ((u32)(pr->mpls_lib_idx) & 0x7) << 20;
-	r[16] |= pr->bypass_all ? BIT(9) : 0;
-	r[16] |= pr->bypass_igr_stp ? BIT(8) : 0;
-	r[16] |= pr->bypass_ibc_sc ? BIT(7) : 0;
-}
-
-static void rtl839x_read_pie_action(u32 r[],  struct pie_rule *pr)
-{
-	if (r[13] & BIT(3)) { // ACT_MASK_FWD set, is it a drop?
-		if ((r[14] & 0x7) == 1) {
-			pr->drop = true;
-		} else {
-			pr->fwd_sel = true;
-			pr->fwd_act = r[14] & 0x7;
-		}
-	}
-
-	pr->bypass_sel = r[13] & BIT(11);
-	pr->mpls_sel = r[13] & BIT(10);
-	pr->nopri_sel = r[13] & BIT(9);
-	pr->ovid_sel = r[13] & BIT(8);
-	pr->ivid_sel = r[13] & BIT(7);
-	pr->meter_sel = r[13] & BIT(6);
-	pr->mir_sel = r[13] & BIT(5);
-	pr->log_sel = r[13] & BIT(4);
-
-	// TODO: Read in data fields
-
-	pr->bypass_all = r[16] & BIT(9);
-	pr->bypass_igr_stp = r[16] & BIT(8);
-	pr->bypass_ibc_sc = r[16] & BIT(7);
-}
-
-void rtl839x_pie_rule_dump_raw(u32 r[])
-{
-	pr_info("Raw IACL table entry:\n");
-	pr_info("Match  : %08x %08x %08x %08x %08x %08x\n", r[0], r[1], r[2], r[3], r[4], r[5]);
-	pr_info("Fixed  : %06x\n", r[6] >> 8);
-	pr_info("Match M: %08x %08x %08x %08x %08x %08x\n",
-		(r[6] << 24) | (r[7] >> 8), (r[7] << 24) | (r[8] >> 8), (r[8] << 24) | (r[9] >> 8),
-		(r[9] << 24) | (r[10] >> 8), (r[10] << 24) | (r[11] >> 8),
-		(r[11] << 24) | (r[12] >> 8));
-	pr_info("R[13]:   %08x\n", r[13]);
-	pr_info("Fixed M: %06x\n", ((r[12] << 16) | (r[13] >> 16)) & 0xffffff);
-	pr_info("Valid / not / and1 / and2 : %1x\n", (r[13] >> 12) & 0xf);
-	pr_info("r 13-16: %08x %08x %08x %08x\n", r[13], r[14], r[15], r[16]);
-}
-
-void rtl839x_pie_rule_dump(struct  pie_rule *pr)
-{
-	pr_info("Drop: %d, fwd: %d, ovid: %d, ivid: %d, flt: %d, log: %d, rmk: %d, meter: %d tagst: %d, mir: %d, nopri: %d, cpupri: %d, otpid: %d, itpid: %d, shape: %d\n",
-		pr->drop, pr->fwd_sel, pr->ovid_sel, pr->ivid_sel, pr->flt_sel, pr->log_sel, pr->rmk_sel, pr->log_sel, pr->tagst_sel, pr->mir_sel, pr->nopri_sel,
-		pr->cpupri_sel, pr->otpid_sel, pr->itpid_sel, pr->shaper_sel);
-	if (pr->fwd_sel)
-		pr_info("FWD: %08x\n", pr->fwd_data);
-	pr_info("TID: %x, %x\n", pr->tid, pr->tid_m);
-}
-
-static int rtl839x_pie_rule_read(struct rtl838x_switch_priv *priv, int idx, struct  pie_rule *pr)
-{
-	// Read IACL table (2) via register 0
-	struct table_reg *q = rtl_table_get(RTL8380_TBL_0, 2);
-	u32 r[17];
-	int i;
-	int block = idx / PIE_BLOCK_SIZE;
-	u32 t_select = sw_r32(RTL839X_ACL_BLK_TMPLTE_CTRL(block));
-
-	memset(pr, 0, sizeof(*pr));
-	rtl_table_read(q, idx);
-	for (i = 0; i < 17; i++)
-		r[i] = sw_r32(rtl_table_data(q, i));
-
-	rtl_table_release(q);
-
-	rtl839x_read_pie_fixed_fields(r, pr);
-	if (!pr->valid)
-		return 0;
-
-	pr_debug("%s: template_selectors %08x, tid: %d\n", __func__, t_select, pr->tid);
-	rtl839x_pie_rule_dump_raw(r);
-
-	rtl839x_read_pie_templated(r, pr, fixed_templates[(t_select >> (pr->tid * 3)) & 0x7]);
-
-	rtl839x_read_pie_action(r, pr);
-
-	return 0;
-}
-
-static int rtl839x_pie_rule_write(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr)
-{
-	// Access IACL table (2) via register 0
-	struct table_reg *q = rtl_table_get(RTL8390_TBL_0, 2);
-	u32 r[17];
-	int i;
-	int block = idx / PIE_BLOCK_SIZE;
-	u32 t_select = sw_r32(RTL839X_ACL_BLK_TMPLTE_CTRL(block));
-
-	pr_debug("%s: %d, t_select: %08x\n", __func__, idx, t_select);
-
-	for (i = 0; i < 17; i++)
-		r[i] = 0;
-
-	if (!pr->valid) {
-		rtl_table_write(q, idx);
-		rtl_table_release(q);
-		return 0;
-	}
-	rtl839x_write_pie_fixed_fields(r, pr);
-
-	pr_debug("%s: template %d\n", __func__, (t_select >> (pr->tid * 3)) & 0x7);
-	rtl839x_write_pie_templated(r, pr, fixed_templates[(t_select >> (pr->tid * 3)) & 0x7]);
-
-	rtl839x_write_pie_action(r, pr);
-
-//	rtl839x_pie_rule_dump_raw(r);
-
-	for (i = 0; i < 17; i++)
-		sw_w32(r[i], rtl_table_data(q, i));
-
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-
-	return 0;
-}
-
-static bool rtl839x_pie_templ_has(int t, enum template_field_id field_type)
-{
-	int i;
-	enum template_field_id ft;
-
-	for (i = 0; i < N_FIXED_FIELDS; i++) {
-		ft = fixed_templates[t][i];
-		if (field_type == ft)
-			return true;
-	}
-
-	return false;
-}
-
-static int rtl839x_pie_verify_template(struct rtl838x_switch_priv *priv,
-				       struct pie_rule *pr, int t, int block)
-{
-	int i;
-
-	if (!pr->is_ipv6 && pr->sip_m && !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_SIP0))
-		return -1;
-
-	if (!pr->is_ipv6 && pr->dip_m && !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_DIP0))
-		return -1;
-
-	if (pr->is_ipv6) {
-		if ((pr->sip6_m.s6_addr32[0] || pr->sip6_m.s6_addr32[1]
-			|| pr->sip6_m.s6_addr32[2] || pr->sip6_m.s6_addr32[3])
-			&& !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_SIP2))
-			return -1;
-		if ((pr->dip6_m.s6_addr32[0] || pr->dip6_m.s6_addr32[1]
-			|| pr->dip6_m.s6_addr32[2] || pr->dip6_m.s6_addr32[3])
-			&& !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_DIP2))
-			return -1;
-	}
-
-	if (ether_addr_to_u64(pr->smac) && !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_SMAC0))
-		return -1;
-
-	if (ether_addr_to_u64(pr->dmac) && !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_DMAC0))
-		return -1;
-
-	// TODO: Check more
-
-	i = find_first_zero_bit(&priv->pie_use_bm[block * 4], PIE_BLOCK_SIZE);
-
-	if (i >= PIE_BLOCK_SIZE)
-		return -1;
-
-	return i + PIE_BLOCK_SIZE * block;
-}
-
-static int rtl839x_pie_rule_add(struct rtl838x_switch_priv *priv, struct pie_rule *pr)
-{
-	int idx, block, j, t;
-	int min_block = 0;
-	int max_block = priv->n_pie_blocks / 2;
-
-	if (pr->is_egress) {
-		min_block = max_block;
-		max_block = priv->n_pie_blocks;
-	}
-
-	mutex_lock(&priv->pie_mutex);
-
-	for (block = min_block; block < max_block; block++) {
-		for (j = 0; j < 2; j++) {
-			t = (sw_r32(RTL839X_ACL_BLK_TMPLTE_CTRL(block)) >> (j * 3)) & 0x7;
-			idx = rtl839x_pie_verify_template(priv, pr, t, block);
-			if (idx >= 0)
-				break;
-		}
-		if (j < 2)
-			break;
-	}
-
-	if (block >= priv->n_pie_blocks) {
-		mutex_unlock(&priv->pie_mutex);
-		return -EOPNOTSUPP;
-	}
-
-	set_bit(idx, priv->pie_use_bm);
-
-	pr->valid = true;
-	pr->tid = j;  // Mapped to template number
-	pr->tid_m = 0x3;
-	pr->id = idx;
-
-	rtl839x_pie_lookup_enable(priv, idx);
-	rtl839x_pie_rule_write(priv, idx, pr);
-
-	mutex_unlock(&priv->pie_mutex);
-	return 0;
-}
-
-static void rtl839x_pie_rule_rm(struct rtl838x_switch_priv *priv, struct pie_rule *pr)
-{
-	int idx = pr->id;
-
-	rtl839x_pie_rule_del(priv, idx, idx);
-	clear_bit(idx, priv->pie_use_bm);
-}
-
-static void rtl839x_pie_init(struct rtl838x_switch_priv *priv)
-{
-	int i;
-	u32 template_selectors;
-
-	mutex_init(&priv->pie_mutex);
-
-	// Power on all PIE blocks
-	for (i = 0; i < priv->n_pie_blocks; i++)
-		sw_w32_mask(0, BIT(i), RTL839X_PS_ACL_PWR_CTRL);
-
-	// Set ingress and egress ACL blocks to 50/50: first Egress block is 9
-	sw_w32_mask(0x1f, 9, RTL839X_ACL_CTRL);  // Writes 9 to cutline field
-
-	// Include IPG in metering
-	sw_w32(1, RTL839X_METER_GLB_CTRL);
-
-	// Delete all present rules
-	rtl839x_pie_rule_del(priv, 0, priv->n_pie_blocks * PIE_BLOCK_SIZE - 1);
-
-	// Enable predefined templates 0, 1 for blocks 0-2
-	template_selectors = 0 | (1 << 3);
-	for (i = 0; i < 3; i++)
-		sw_w32(template_selectors, RTL839X_ACL_BLK_TMPLTE_CTRL(i));
-
-	// Enable predefined templates 2, 3 for blocks 3-5
-	template_selectors = 2 | (3 << 3);
-	for (i = 3; i < 6; i++)
-		sw_w32(template_selectors, RTL839X_ACL_BLK_TMPLTE_CTRL(i));
-
-	// Enable predefined templates 1, 4 for blocks 6-8
-	template_selectors = 2 | (3 << 3);
-	for (i = 6; i < 9; i++)
-		sw_w32(template_selectors, RTL839X_ACL_BLK_TMPLTE_CTRL(i));
-
-	// Enable predefined templates 0, 1 for blocks 9-11
-	template_selectors = 0 | (1 << 3);
-	for (i = 9; i < 12; i++)
-		sw_w32(template_selectors, RTL839X_ACL_BLK_TMPLTE_CTRL(i));
-
-	// Enable predefined templates 2, 3 for blocks 12-14
-	template_selectors = 2 | (3 << 3);
-	for (i = 12; i < 15; i++)
-		sw_w32(template_selectors, RTL839X_ACL_BLK_TMPLTE_CTRL(i));
-
-	// Enable predefined templates 1, 4 for blocks 15-17
-	template_selectors = 2 | (3 << 3);
-	for (i = 15; i < 18; i++)
-		sw_w32(template_selectors, RTL839X_ACL_BLK_TMPLTE_CTRL(i));
-}
-
-static u32 rtl839x_packet_cntr_read(int counter)
-{
-	u32 v;
-
-	// Read LOG table (4) via register RTL8390_TBL_0
-	struct table_reg *r = rtl_table_get(RTL8390_TBL_0, 4);
-
-	pr_debug("In %s, id %d\n", __func__, counter);
-	rtl_table_read(r, counter / 2);
-
-	// The table has a size of 2 registers
-	if (counter % 2)
-		v = sw_r32(rtl_table_data(r, 0));
-	else
-		v = sw_r32(rtl_table_data(r, 1));
-
-	rtl_table_release(r);
-
-	return v;
-}
-
-static void rtl839x_packet_cntr_clear(int counter)
-{
-	// Access LOG table (4) via register RTL8390_TBL_0
-	struct table_reg *r = rtl_table_get(RTL8390_TBL_0, 4);
-
-	pr_debug("In %s, id %d\n", __func__, counter);
-	// The table has a size of 2 registers
-	if (counter % 2)
-		sw_w32(0, rtl_table_data(r, 0));
-	else
-		sw_w32(0, rtl_table_data(r, 1));
-
-	rtl_table_write(r, counter / 2);
-
-	rtl_table_release(r);
-}
-
-static void rtl839x_route_read(int idx, struct rtl83xx_route *rt)
-{
-	u64 v;
-	// Read ROUTING table (2) via register RTL8390_TBL_1
-	struct table_reg *r = rtl_table_get(RTL8390_TBL_1, 2);
-
-	pr_debug("In %s\n", __func__);
-	rtl_table_read(r, idx);
-
-	// The table has a size of 2 registers
-	v = sw_r32(rtl_table_data(r, 0));
-	v <<= 32;
-	v |= sw_r32(rtl_table_data(r, 1));
-	rt->switch_mac_id = (v >> 12) & 0xf;
-	rt->nh.gw = v >> 16;
-
-	rtl_table_release(r);
-}
-
-static void rtl839x_route_write(int idx, struct rtl83xx_route *rt)
-{
-	u32 v;
-
-	// Read ROUTING table (2) via register RTL8390_TBL_1
-	struct table_reg *r = rtl_table_get(RTL8390_TBL_1, 2);
-
-	pr_debug("In %s\n", __func__);
-	sw_w32(rt->nh.gw >> 16, rtl_table_data(r, 0));
-	v = rt->nh.gw << 16;
-	v |= rt->switch_mac_id << 12;
-	sw_w32(v, rtl_table_data(r, 1));
-	rtl_table_write(r, idx);
-
-	rtl_table_release(r);
-}
-
-/*
- * Configure the switch's own MAC addresses used when routing packets
- */
-static void rtl839x_setup_port_macs(struct rtl838x_switch_priv *priv)
-{
-	int i;
-	struct net_device *dev;
-	u64 mac;
-
-	pr_debug("%s: got port %08x\n", __func__, (u32)priv->ports[priv->cpu_port].dp);
-	dev = priv->ports[priv->cpu_port].dp->slave;
-	mac = ether_addr_to_u64(dev->dev_addr);
-
-	for (i = 0; i < 15; i++) {
-		mac++;  // BUG: VRRP for testing
-		sw_w32(mac >> 32, RTL839X_ROUTING_SA_CTRL + i * 8);
-		sw_w32(mac, RTL839X_ROUTING_SA_CTRL + i * 8 + 4);
-	}
-}
-
-int rtl839x_l3_setup(struct rtl838x_switch_priv *priv)
-{
-	rtl839x_setup_port_macs(priv);
-
-	return 0;
-}
-
-void rtl839x_vlan_port_keep_tag_set(int port, bool keep_outer, bool keep_inner)
-{
-	sw_w32(FIELD_PREP(RTL839X_VLAN_PORT_TAG_STS_CTRL_OTAG_STS_MASK,
-			  keep_outer ? RTL839X_VLAN_PORT_TAG_STS_TAGGED : RTL839X_VLAN_PORT_TAG_STS_UNTAG) |
-	       FIELD_PREP(RTL839X_VLAN_PORT_TAG_STS_CTRL_ITAG_STS_MASK,
-			  keep_inner ? RTL839X_VLAN_PORT_TAG_STS_TAGGED : RTL839X_VLAN_PORT_TAG_STS_UNTAG),
-	       RTL839X_VLAN_PORT_TAG_STS_CTRL(port));
-}
-
-void rtl839x_vlan_port_pvidmode_set(int port, enum pbvlan_type type, enum pbvlan_mode mode)
-{
-	if (type == PBVLAN_TYPE_INNER)
-		sw_w32_mask(0x3, mode, RTL839X_VLAN_PORT_PB_VLAN + (port << 2));
-	else
-		sw_w32_mask(0x3 << 14, mode << 14, RTL839X_VLAN_PORT_PB_VLAN + (port << 2));
-}
-
-void rtl839x_vlan_port_pvid_set(int port, enum pbvlan_type type, int pvid)
-{
-	if (type == PBVLAN_TYPE_INNER)
-		sw_w32_mask(0xfff << 2, pvid << 2, RTL839X_VLAN_PORT_PB_VLAN + (port << 2));
-	else
-		sw_w32_mask(0xfff << 16, pvid << 16, RTL839X_VLAN_PORT_PB_VLAN + (port << 2));
-}
-
-static int rtl839x_set_ageing_time(unsigned long msec)
-{
-	int t = sw_r32(RTL839X_L2_CTRL_1);
-
-	t &= 0x1FFFFF;
-	t = t * 3 / 5; /* Aging time in seconds. 0: L2 aging disabled */
-	pr_debug("L2 AGING time: %d sec\n", t);
-
-	t = (msec * 5 + 2000) / 3000;
-	t = t > 0x1FFFFF ? 0x1FFFFF : t;
-	sw_w32_mask(0x1FFFFF, t, RTL839X_L2_CTRL_1);
-	pr_debug("Dynamic aging for ports: %x\n", sw_r32(RTL839X_L2_PORT_AGING_OUT));
-
-	return 0;
-}
-
-static void rtl839x_set_igr_filter(int port,  enum igr_filter state)
-{
-	sw_w32_mask(0x3 << ((port & 0xf)<<1), state << ((port & 0xf)<<1),
-		    RTL839X_VLAN_PORT_IGR_FLTR + (((port >> 4) << 2)));
-}
-
-static void rtl839x_set_egr_filter(int port,  enum egr_filter state)
-{
-	sw_w32_mask(0x1 << (port % 0x20), state << (port % 0x20),
-			RTL839X_VLAN_PORT_EGR_FLTR + (((port >> 5) << 2)));
-}
-
-void rtl839x_set_distribution_algorithm(int group, int algoidx, u32 algomsk)
-{
-	sw_w32_mask(3 << ((group & 0xf) << 1), algoidx << ((group & 0xf) << 1),
-		    RTL839X_TRK_HASH_IDX_CTRL + ((group >> 4) << 2));
-	sw_w32(algomsk, RTL839X_TRK_HASH_CTRL + (algoidx << 2));
-}
-
-void rtl839x_set_receive_management_action(int port, rma_ctrl_t type, action_type_t action)
-{
-	switch(type) {
-	case BPDU:
-		sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1),
-			    RTL839X_RMA_BPDU_CTRL + ((port >> 4) << 2));
-	break;
-	case PTP:
-		sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1),
-			    RTL839X_RMA_PTP_CTRL + ((port >> 4) << 2));
-	break;
-	case LLTP:
-		sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1),
-			    RTL839X_RMA_LLTP_CTRL + ((port >> 4) << 2));
-	break;
-	default:
-	break;
-	}
-}
-
-const struct rtl838x_reg rtl839x_reg = {
-	.mask_port_reg_be = rtl839x_mask_port_reg_be,
-	.set_port_reg_be = rtl839x_set_port_reg_be,
-	.get_port_reg_be = rtl839x_get_port_reg_be,
-	.mask_port_reg_le = rtl839x_mask_port_reg_le,
-	.set_port_reg_le = rtl839x_set_port_reg_le,
-	.get_port_reg_le = rtl839x_get_port_reg_le,
-	.stat_port_rst = RTL839X_STAT_PORT_RST,
-	.stat_rst = RTL839X_STAT_RST,
-	.stat_port_std_mib = RTL839X_STAT_PORT_STD_MIB,
-	.traffic_enable = rtl839x_traffic_enable,
-	.traffic_disable = rtl839x_traffic_disable,
-	.traffic_get = rtl839x_traffic_get,
-	.traffic_set = rtl839x_traffic_set,
-	.port_iso_ctrl = rtl839x_port_iso_ctrl,
-	.l2_ctrl_0 = RTL839X_L2_CTRL_0,
-	.l2_ctrl_1 = RTL839X_L2_CTRL_1,
-	.l2_port_aging_out = RTL839X_L2_PORT_AGING_OUT,
-	.set_ageing_time = rtl839x_set_ageing_time,
-	.smi_poll_ctrl = RTL839X_SMI_PORT_POLLING_CTRL,
-	.l2_tbl_flush_ctrl = RTL839X_L2_TBL_FLUSH_CTRL,
-	.exec_tbl0_cmd = rtl839x_exec_tbl0_cmd,
-	.exec_tbl1_cmd = rtl839x_exec_tbl1_cmd,
-	.tbl_access_data_0 = rtl839x_tbl_access_data_0,
-	.isr_glb_src = RTL839X_ISR_GLB_SRC,
-	.isr_port_link_sts_chg = RTL839X_ISR_PORT_LINK_STS_CHG,
-	.imr_port_link_sts_chg = RTL839X_IMR_PORT_LINK_STS_CHG,
-	.imr_glb = RTL839X_IMR_GLB,
-	.vlan_tables_read = rtl839x_vlan_tables_read,
-	.vlan_set_tagged = rtl839x_vlan_set_tagged,
-	.vlan_set_untagged = rtl839x_vlan_set_untagged,
-	.vlan_profile_dump = rtl839x_vlan_profile_dump,
-	.vlan_profile_setup = rtl839x_vlan_profile_setup,
-	.vlan_fwd_on_inner = rtl839x_vlan_fwd_on_inner,
-	.vlan_port_keep_tag_set = rtl839x_vlan_port_keep_tag_set,
-	.vlan_port_pvidmode_set = rtl839x_vlan_port_pvidmode_set,
-	.vlan_port_pvid_set = rtl839x_vlan_port_pvid_set,
-	.set_vlan_igr_filter = rtl839x_set_igr_filter,
-	.set_vlan_egr_filter = rtl839x_set_egr_filter,
-	.enable_learning = rtl839x_enable_learning,
-	.enable_flood = rtl839x_enable_flood,
-	.enable_mcast_flood = rtl839x_enable_mcast_flood,
-	.enable_bcast_flood = rtl839x_enable_bcast_flood,
-	.set_static_move_action = rtl839x_set_static_move_action,
-	.stp_get = rtl839x_stp_get,
-	.stp_set = rtl839x_stp_set,
-	.mac_force_mode_ctrl = rtl839x_mac_force_mode_ctrl,
-	.mac_port_ctrl = rtl839x_mac_port_ctrl,
-	.l2_port_new_salrn = rtl839x_l2_port_new_salrn,
-	.l2_port_new_sa_fwd = rtl839x_l2_port_new_sa_fwd,
-	.mir_ctrl = RTL839X_MIR_CTRL,
-	.mir_dpm = RTL839X_MIR_DPM_CTRL,
-	.mir_spm = RTL839X_MIR_SPM_CTRL,
-	.mac_link_sts = RTL839X_MAC_LINK_STS,
-	.mac_link_dup_sts = RTL839X_MAC_LINK_DUP_STS,
-	.mac_link_spd_sts = rtl839x_mac_link_spd_sts,
-	.mac_rx_pause_sts = RTL839X_MAC_RX_PAUSE_STS,
-	.mac_tx_pause_sts = RTL839X_MAC_TX_PAUSE_STS,
-	.read_l2_entry_using_hash = rtl839x_read_l2_entry_using_hash,
-	.write_l2_entry_using_hash = rtl839x_write_l2_entry_using_hash,
-	.read_cam = rtl839x_read_cam,
-	.write_cam = rtl839x_write_cam,
-	.trk_mbr_ctr = rtl839x_trk_mbr_ctr,
-	.rma_bpdu_fld_pmask = RTL839X_RMA_BPDU_FLD_PMSK,
-	.spcl_trap_eapol_ctrl = RTL839X_SPCL_TRAP_EAPOL_CTRL,
-	.init_eee = rtl839x_init_eee,
-	.port_eee_set = rtl839x_port_eee_set,
-	.eee_port_ability = rtl839x_eee_port_ability,
-	.l2_hash_seed = rtl839x_l2_hash_seed, 
-	.l2_hash_key = rtl839x_l2_hash_key,
-	.read_mcast_pmask = rtl839x_read_mcast_pmask,
-	.write_mcast_pmask = rtl839x_write_mcast_pmask,
-	.pie_init = rtl839x_pie_init,
-	.pie_rule_read = rtl839x_pie_rule_read,
-	.pie_rule_write = rtl839x_pie_rule_write,
-	.pie_rule_add = rtl839x_pie_rule_add,
-	.pie_rule_rm = rtl839x_pie_rule_rm,
-	.l2_learning_setup = rtl839x_l2_learning_setup,
-	.packet_cntr_read = rtl839x_packet_cntr_read,
-	.packet_cntr_clear = rtl839x_packet_cntr_clear,
-	.route_read = rtl839x_route_read,
-	.route_write = rtl839x_route_write,
-	.l3_setup = rtl839x_l3_setup,
-	.set_distribution_algorithm = rtl839x_set_distribution_algorithm,
-	.set_receive_management_action = rtl839x_set_receive_management_action,
-};
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl83xx.h b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl83xx.h
deleted file mode 100644
index 485d0e8a7e9c..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl83xx.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef _NET_DSA_RTL83XX_H
-#define _NET_DSA_RTL83XX_H
-
-#include <net/dsa.h>
-#include "rtl838x.h"
-
-
-#define RTL8380_VERSION_A 'A'
-#define RTL8390_VERSION_A 'A'
-#define RTL8380_VERSION_B 'B'
-
-struct fdb_update_work {
-	struct work_struct work;
-	struct net_device *ndev;
-	u64 macs[];
-};
-
-#define MIB_DESC(_size, _offset, _name) {.size = _size, .offset = _offset, .name = _name}
-struct rtl83xx_mib_desc {
-	unsigned int size;
-	unsigned int offset;
-	const char *name;
-};
-
-/* API for switch table access */
-struct table_reg {
-	u16 addr;
-	u16 data;
-	u8  max_data;
-	u8 c_bit;
-	u8 t_bit;
-	u8 rmode;
-	u8 tbl;
-	struct mutex lock;
-};
-
-#define TBL_DESC(_addr, _data, _max_data, _c_bit, _t_bit, _rmode) \
-		{  .addr = _addr, .data = _data, .max_data = _max_data, .c_bit = _c_bit, \
-		    .t_bit = _t_bit, .rmode = _rmode \
-		}
-
-typedef enum {
-	RTL8380_TBL_L2 = 0,
-	RTL8380_TBL_0,
-	RTL8380_TBL_1,
-	RTL8390_TBL_L2,
-	RTL8390_TBL_0,
-	RTL8390_TBL_1,
-	RTL8390_TBL_2,
-	RTL9300_TBL_L2,
-	RTL9300_TBL_0,
-	RTL9300_TBL_1,
-	RTL9300_TBL_2,
-	RTL9300_TBL_HSB,
-	RTL9300_TBL_HSA,
-	RTL9310_TBL_0,
-	RTL9310_TBL_1,
-	RTL9310_TBL_2,
-	RTL9310_TBL_3,
-	RTL9310_TBL_4,
-	RTL9310_TBL_5,
-	RTL_TBL_END
-} rtl838x_tbl_reg_t;
-
-void rtl_table_init(void);
-struct table_reg *rtl_table_get(rtl838x_tbl_reg_t r, int t);
-void rtl_table_release(struct table_reg *r);
-int rtl_table_read(struct table_reg *r, int idx);
-int rtl_table_write(struct table_reg *r, int idx);
-inline u16 rtl_table_data(struct table_reg *r, int i);
-inline u32 rtl_table_data_r(struct table_reg *r, int i);
-inline void rtl_table_data_w(struct table_reg *r, u32 v, int i);
-
-void __init rtl83xx_setup_qos(struct rtl838x_switch_priv *priv);
-
-int rtl83xx_packet_cntr_alloc(struct rtl838x_switch_priv *priv);
-
-int rtl83xx_port_is_under(const struct net_device * dev, struct rtl838x_switch_priv *priv);
-
-int read_phy(u32 port, u32 page, u32 reg, u32 *val);
-int write_phy(u32 port, u32 page, u32 reg, u32 val);
-
-/* Port register accessor functions for the RTL839x and RTL931X SoCs */
-void rtl839x_mask_port_reg_be(u64 clear, u64 set, int reg);
-u64 rtl839x_get_port_reg_be(int reg);
-void rtl839x_set_port_reg_be(u64 set, int reg);
-void rtl839x_mask_port_reg_le(u64 clear, u64 set, int reg);
-void rtl839x_set_port_reg_le(u64 set, int reg);
-u64 rtl839x_get_port_reg_le(int reg);
-
-/* Port register accessor functions for the RTL838x and RTL930X SoCs */
-void rtl838x_mask_port_reg(u64 clear, u64 set, int reg);
-void rtl838x_set_port_reg(u64 set, int reg);
-u64 rtl838x_get_port_reg(int reg);
-
-/* RTL838x-specific */
-u32 rtl838x_hash(struct rtl838x_switch_priv *priv, u64 seed);
-irqreturn_t rtl838x_switch_irq(int irq, void *dev_id);
-void rtl8380_get_version(struct rtl838x_switch_priv *priv);
-void rtl838x_vlan_profile_dump(int index);
-int rtl83xx_dsa_phy_read(struct dsa_switch *ds, int phy_addr, int phy_reg);
-void rtl8380_sds_rst(int mac);
-int rtl8380_sds_power(int mac, int val);
-void rtl838x_print_matrix(void);
-
-/* RTL839x-specific */
-u32 rtl839x_hash(struct rtl838x_switch_priv *priv, u64 seed);
-irqreturn_t rtl839x_switch_irq(int irq, void *dev_id);
-void rtl8390_get_version(struct rtl838x_switch_priv *priv);
-void rtl839x_vlan_profile_dump(int index);
-int rtl83xx_dsa_phy_write(struct dsa_switch *ds, int phy_addr, int phy_reg, u16 val);
-void rtl839x_exec_tbl2_cmd(u32 cmd);
-void rtl839x_print_matrix(void);
-
-/* RTL930x-specific */
-u32 rtl930x_hash(struct rtl838x_switch_priv *priv, u64 seed);
-irqreturn_t rtl930x_switch_irq(int irq, void *dev_id);
-irqreturn_t rtl839x_switch_irq(int irq, void *dev_id);
-void rtl930x_vlan_profile_dump(int index);
-int rtl9300_sds_power(int mac, int val);
-void rtl9300_sds_rst(int sds_num, u32 mode);
-int rtl9300_serdes_setup(int sds_num, phy_interface_t phy_mode);
-void rtl930x_print_matrix(void);
-
-/* RTL931x-specific */
-irqreturn_t rtl931x_switch_irq(int irq, void *dev_id);
-int rtl931x_sds_cmu_band_get(int sds, phy_interface_t mode);
-int rtl931x_sds_cmu_band_set(int sds, bool enable, u32 band, phy_interface_t mode);
-void rtl931x_sds_init(u32 sds, phy_interface_t mode);
-
-int rtl83xx_lag_add(struct dsa_switch *ds, int group, int port, struct netdev_lag_upper_info *info);
-int rtl83xx_lag_del(struct dsa_switch *ds, int group, int port);
-
-#endif /* _NET_DSA_RTL83XX_H */
-
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl930x.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl930x.c
deleted file mode 100644
index 5dde8353e2db..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl930x.c
+++ /dev/null
@@ -1,2560 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-#include <linux/inetdevice.h>
-
-#include "rtl83xx.h"
-
-#define RTL930X_VLAN_PORT_TAG_STS_INTERNAL			0x0
-#define RTL930X_VLAN_PORT_TAG_STS_UNTAG				0x1
-#define RTL930X_VLAN_PORT_TAG_STS_TAGGED			0x2
-#define RTL930X_VLAN_PORT_TAG_STS_PRIORITY_TAGGED		0x3
-
-#define RTL930X_VLAN_PORT_TAG_STS_CTRL_BASE			0xCE24
-/* port 0-28 */
-#define RTL930X_VLAN_PORT_TAG_STS_CTRL(port) \
-		RTL930X_VLAN_PORT_TAG_STS_CTRL_BASE + (port << 2)
-#define RTL930X_VLAN_PORT_TAG_STS_CTRL_EGR_OTAG_STS_MASK	GENMASK(7,6)
-#define RTL930X_VLAN_PORT_TAG_STS_CTRL_EGR_ITAG_STS_MASK	GENMASK(5,4)
-#define RTL930X_VLAN_PORT_TAG_STS_CTRL_EGR_P_OTAG_KEEP_MASK	GENMASK(3,3)
-#define RTL930X_VLAN_PORT_TAG_STS_CTRL_EGR_P_ITAG_KEEP_MASK	GENMASK(2,2)
-#define RTL930X_VLAN_PORT_TAG_STS_CTRL_IGR_P_OTAG_KEEP_MASK	GENMASK(1,1)
-#define RTL930X_VLAN_PORT_TAG_STS_CTRL_IGR_P_ITAG_KEEP_MASK	GENMASK(0,0)
-
-extern struct mutex smi_lock;
-extern struct rtl83xx_soc_info soc_info;
-
-/* Definition of the RTL930X-specific template field IDs as used in the PIE */
-enum template_field_id {
-	TEMPLATE_FIELD_SPM0 = 0,		// Source portmask ports 0-15
-	TEMPLATE_FIELD_SPM1 = 1,		// Source portmask ports 16-31
-	TEMPLATE_FIELD_DMAC0 = 2,		// Destination MAC [15:0]
-	TEMPLATE_FIELD_DMAC1 = 3,		// Destination MAC [31:16]
-	TEMPLATE_FIELD_DMAC2 = 4,		// Destination MAC [47:32]
-	TEMPLATE_FIELD_SMAC0 = 5,		// Source MAC [15:0]
-	TEMPLATE_FIELD_SMAC1 = 6,		// Source MAC [31:16]
-	TEMPLATE_FIELD_SMAC2 = 7,		// Source MAC [47:32]
-	TEMPLATE_FIELD_ETHERTYPE = 8,		// Ethernet frame type field
-	TEMPLATE_FIELD_OTAG = 9,
-	TEMPLATE_FIELD_ITAG = 10,
-	TEMPLATE_FIELD_SIP0 = 11,
-	TEMPLATE_FIELD_SIP1 = 12,
-	TEMPLATE_FIELD_DIP0 = 13,
-	TEMPLATE_FIELD_DIP1 = 14,
-	TEMPLATE_FIELD_IP_TOS_PROTO = 15,
-	TEMPLATE_FIELD_L4_SPORT = 16,
-	TEMPLATE_FIELD_L4_DPORT = 17,
-	TEMPLATE_FIELD_L34_HEADER = 18,
-	TEMPLATE_FIELD_TCP_INFO = 19,
-	TEMPLATE_FIELD_FIELD_SELECTOR_VALID = 20,
-	TEMPLATE_FIELD_FIELD_SELECTOR_0 = 21,
-	TEMPLATE_FIELD_FIELD_SELECTOR_1 = 22,
-	TEMPLATE_FIELD_FIELD_SELECTOR_2 = 23,
-	TEMPLATE_FIELD_FIELD_SELECTOR_3 = 24,
-	TEMPLATE_FIELD_FIELD_SELECTOR_4 = 25,
-	TEMPLATE_FIELD_FIELD_SELECTOR_5 = 26,
-	TEMPLATE_FIELD_SIP2 = 27,
-	TEMPLATE_FIELD_SIP3 = 28,
-	TEMPLATE_FIELD_SIP4 = 29,
-	TEMPLATE_FIELD_SIP5 = 30,
-	TEMPLATE_FIELD_SIP6 = 31,
-	TEMPLATE_FIELD_SIP7 = 32,
-	TEMPLATE_FIELD_DIP2 = 33,
-	TEMPLATE_FIELD_DIP3 = 34,
-	TEMPLATE_FIELD_DIP4 = 35,
-	TEMPLATE_FIELD_DIP5 = 36,
-	TEMPLATE_FIELD_DIP6 = 37,
-	TEMPLATE_FIELD_DIP7 = 38,
-	TEMPLATE_FIELD_PKT_INFO = 39,
-	TEMPLATE_FIELD_FLOW_LABEL = 40,
-	TEMPLATE_FIELD_DSAP_SSAP = 41,
-	TEMPLATE_FIELD_SNAP_OUI = 42,
-	TEMPLATE_FIELD_FWD_VID = 43,
-	TEMPLATE_FIELD_RANGE_CHK = 44,
-	TEMPLATE_FIELD_VLAN_GMSK = 45,		// VLAN Group Mask/IP range check
-	TEMPLATE_FIELD_DLP = 46,
-	TEMPLATE_FIELD_META_DATA = 47,
-	TEMPLATE_FIELD_SRC_FWD_VID = 48,
-	TEMPLATE_FIELD_SLP = 49,
-};
-
-/* The meaning of TEMPLATE_FIELD_VLAN depends on phase and the configuration in
- * RTL930X_PIE_CTRL. We use always the same definition and map to the inner VLAN tag:
- */
-#define TEMPLATE_FIELD_VLAN TEMPLATE_FIELD_ITAG
-
-// Number of fixed templates predefined in the RTL9300 SoC
-#define N_FIXED_TEMPLATES 5
-// RTL9300 specific predefined templates
-static enum template_field_id fixed_templates[N_FIXED_TEMPLATES][N_FIXED_FIELDS] =
-{
-	{
-	  TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2,
-	  TEMPLATE_FIELD_SMAC0, TEMPLATE_FIELD_SMAC1, TEMPLATE_FIELD_SMAC2,
-	  TEMPLATE_FIELD_VLAN, TEMPLATE_FIELD_IP_TOS_PROTO, TEMPLATE_FIELD_DSAP_SSAP,
-	  TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1
-	}, {
-	  TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0,
-	  TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_IP_TOS_PROTO, TEMPLATE_FIELD_TCP_INFO,
-	  TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_L4_DPORT, TEMPLATE_FIELD_VLAN,
-	  TEMPLATE_FIELD_RANGE_CHK, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1
-	}, {
-	  TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2,
-	  TEMPLATE_FIELD_VLAN, TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_IP_TOS_PROTO,
-	  TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0,
-	  TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_L4_DPORT
-	}, {
-	  TEMPLATE_FIELD_DIP0, TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_DIP2,
-	  TEMPLATE_FIELD_DIP3, TEMPLATE_FIELD_DIP4, TEMPLATE_FIELD_DIP5,
-	  TEMPLATE_FIELD_DIP6, TEMPLATE_FIELD_DIP7, TEMPLATE_FIELD_IP_TOS_PROTO,
-	  TEMPLATE_FIELD_TCP_INFO, TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_L4_DPORT
-	}, {
-	  TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_SIP2,
-	  TEMPLATE_FIELD_SIP3, TEMPLATE_FIELD_SIP4, TEMPLATE_FIELD_SIP5,
-	  TEMPLATE_FIELD_SIP6, TEMPLATE_FIELD_SIP7, TEMPLATE_FIELD_VLAN,
-	  TEMPLATE_FIELD_RANGE_CHK, TEMPLATE_FIELD_SPM1, TEMPLATE_FIELD_SPM1
-	},
-};
-
-void rtl930x_print_matrix(void)
-{
-	int i;
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6);
-
-	for (i = 0; i < 29; i++) {
-		rtl_table_read(r, i);
-		pr_debug("> %08x\n", sw_r32(rtl_table_data(r, 0)));
-	}
-	rtl_table_release(r);
-}
-
-inline void rtl930x_exec_tbl0_cmd(u32 cmd)
-{
-	sw_w32(cmd, RTL930X_TBL_ACCESS_CTRL_0);
-	do { } while (sw_r32(RTL930X_TBL_ACCESS_CTRL_0) & (1 << 17));
-}
-
-inline void rtl930x_exec_tbl1_cmd(u32 cmd)
-{
-	sw_w32(cmd, RTL930X_TBL_ACCESS_CTRL_1);
-	do { } while (sw_r32(RTL930X_TBL_ACCESS_CTRL_1) & (1 << 17));
-}
-
-inline int rtl930x_tbl_access_data_0(int i)
-{
-	return RTL930X_TBL_ACCESS_DATA_0(i);
-}
-
-static inline int rtl930x_l2_port_new_salrn(int p)
-{
-	return RTL930X_L2_PORT_SALRN(p);
-}
-
-static inline int rtl930x_l2_port_new_sa_fwd(int p)
-{
-	// TODO: The definition of the fields changed, because of the master-cpu in a stack
-	return RTL930X_L2_PORT_NEW_SA_FWD(p);
-}
-
-inline static int rtl930x_trk_mbr_ctr(int group)
-{
-	return RTL930X_TRK_MBR_CTRL + (group << 2);
-}
-
-static void rtl930x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info)
-{
-	u32 v, w;
-	// Read VLAN table (1) via register 0
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 1);
-
-	rtl_table_read(r, vlan);
-	v = sw_r32(rtl_table_data(r, 0));
-	w = sw_r32(rtl_table_data(r, 1));
-	pr_debug("VLAN_READ %d: %08x %08x\n", vlan, v, w);
-	rtl_table_release(r);
-
-	info->tagged_ports = v >> 3;
-	info->profile_id = (w >> 24) & 7;
-	info->hash_mc_fid = !!(w & BIT(27));
-	info->hash_uc_fid = !!(w & BIT(28));
-	info->fid = ((v & 0x7) << 3) | ((w >> 29) & 0x7);
-
-	// Read UNTAG table via table register 2
-	r = rtl_table_get(RTL9300_TBL_2, 0);
-	rtl_table_read(r, vlan);
-	v = sw_r32(rtl_table_data(r, 0));
-	rtl_table_release(r);
-
-	info->untagged_ports = v >> 3;
-}
-
-static void rtl930x_vlan_set_tagged(u32 vlan, struct rtl838x_vlan_info *info)
-{
-	u32 v, w;
-	// Access VLAN table (1) via register 0
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 1);
-
-	v = info->tagged_ports << 3;
-	v |= ((u32)info->fid) >> 3;
-
-	w = ((u32)info->fid) << 29;
-	w |= info->hash_mc_fid ? BIT(27) : 0;
-	w |= info->hash_uc_fid ? BIT(28) : 0;
-	w |= info->profile_id << 24;
-
-	sw_w32(v, rtl_table_data(r, 0));
-	sw_w32(w, rtl_table_data(r, 1));
-
-	rtl_table_write(r, vlan);
-	rtl_table_release(r);
-}
-
-void rtl930x_vlan_profile_dump(int profile)
-{
-	u32 p[5];
-
-	if (profile < 0 || profile > 7)
-		return;
-
-	p[0] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile));
-	p[1] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile) + 4);
-	p[2] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile) + 8) & 0x1FFFFFFF;
-	p[3] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile) + 12) & 0x1FFFFFFF;
-	p[4] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile) + 16) & 0x1FFFFFFF;
-
-	pr_info("VLAN %d: L2 learn: %d; Unknown MC PMasks: L2 %0x, IPv4 %0x, IPv6: %0x",
-		profile, p[0] & (3 << 21), p[2], p[3], p[4]);
-	pr_info("  Routing enabled: IPv4 UC %c, IPv6 UC %c, IPv4 MC %c, IPv6 MC %c\n",
-		p[0] & BIT(17) ? 'y' : 'n', p[0] & BIT(16) ? 'y' : 'n',
-		p[0] & BIT(13) ? 'y' : 'n', p[0] & BIT(12) ? 'y' : 'n');
-	pr_info("  Bridge enabled: IPv4 MC %c, IPv6 MC %c,\n",
-		p[0] & BIT(15) ? 'y' : 'n', p[0] & BIT(14) ? 'y' : 'n');
-	pr_info("VLAN profile %d: raw %08x %08x %08x %08x %08x\n",
-		profile, p[0], p[1], p[2], p[3], p[4]);
-}
-
-static void rtl930x_vlan_set_untagged(u32 vlan, u64 portmask)
-{
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_2, 0);
-
-	sw_w32(portmask << 3, rtl_table_data(r, 0));
-	rtl_table_write(r, vlan);
-	rtl_table_release(r);
-}
-
-/* Sets the L2 forwarding to be based on either the inner VLAN tag or the outer
- */
-static void rtl930x_vlan_fwd_on_inner(int port, bool is_set)
-{
-	// Always set all tag modes to fwd based on either inner or outer tag
-	if (is_set)
-		sw_w32_mask(0, 0xf, RTL930X_VLAN_PORT_FWD + (port << 2));
-	else
-		sw_w32_mask(0xf, 0, RTL930X_VLAN_PORT_FWD + (port << 2));
-}
-
-static void rtl930x_vlan_profile_setup(int profile)
-{
-	u32 p[5];
-
-	pr_info("In %s\n", __func__);
-	p[0] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile));
-	p[1] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile) + 4);
-
-	// Enable routing of Ipv4/6 Unicast and IPv4/6 Multicast traffic
-	p[0] |= BIT(17) | BIT(16) | BIT(13) | BIT(12);
-	p[2] = 0x1fffffff; // L2 unknown MC flooding portmask all ports, including the CPU-port
-	p[3] = 0x1fffffff; // IPv4 unknown MC flooding portmask
-	p[4] = 0x1fffffff; // IPv6 unknown MC flooding portmask
-
-	sw_w32(p[0], RTL930X_VLAN_PROFILE_SET(profile));
-	sw_w32(p[1], RTL930X_VLAN_PROFILE_SET(profile) + 4);
-	sw_w32(p[2], RTL930X_VLAN_PROFILE_SET(profile) + 8);
-	sw_w32(p[3], RTL930X_VLAN_PROFILE_SET(profile) + 12);
-	sw_w32(p[4], RTL930X_VLAN_PROFILE_SET(profile) + 16);
-}
-
-static void rtl930x_l2_learning_setup(void)
-{
-	// Portmask for flooding broadcast traffic
-	sw_w32(0x1fffffff, RTL930X_L2_BC_FLD_PMSK);
-
-	// Portmask for flooding unicast traffic with unknown destination
-	sw_w32(0x1fffffff, RTL930X_L2_UNKN_UC_FLD_PMSK);
-
-	// Limit learning to maximum: 32k entries, after that just flood (bits 0-1)
-	sw_w32((0x7fff << 2) | 0, RTL930X_L2_LRN_CONSTRT_CTRL);
-}
-
-static void rtl930x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
-{
-	int i;
-	u32 cmd = 1 << 17 /* Execute cmd */
-		| 0 << 16 /* Read */
-		| 4 << 12 /* Table type 0b10 */
-		| (msti & 0xfff);
-	priv->r->exec_tbl0_cmd(cmd);
-
-	for (i = 0; i < 2; i++)
-		port_state[i] = sw_r32(RTL930X_TBL_ACCESS_DATA_0(i));
-	pr_debug("MSTI: %d STATE: %08x, %08x\n", msti, port_state[0], port_state[1]);
-}
-
-static void rtl930x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
-{
-	int i;
-	u32 cmd = 1 << 17 /* Execute cmd */
-		| 1 << 16 /* Write */
-		| 4 << 12 /* Table type 4 */
-		| (msti & 0xfff);
-
-	for (i = 0; i < 2; i++)
-		sw_w32(port_state[i], RTL930X_TBL_ACCESS_DATA_0(i));
-	priv->r->exec_tbl0_cmd(cmd);
-}
-
-static inline int rtl930x_mac_force_mode_ctrl(int p)
-{
-	return RTL930X_MAC_FORCE_MODE_CTRL + (p << 2);
-}
-
-static inline int rtl930x_mac_port_ctrl(int p)
-{
-	return RTL930X_MAC_L2_PORT_CTRL(p);
-}
-
-static inline int rtl930x_mac_link_spd_sts(int p)
-{
-	return RTL930X_MAC_LINK_SPD_STS(p);
-}
-
-static u64 rtl930x_l2_hash_seed(u64 mac, u32 vid)
-{
-	u64 v = vid;
-
-	v <<= 48;
-	v |= mac;
-
-	return v;
-}
-
-/*
- * Calculate both the block 0 and the block 1 hash by applyingthe same hash
- * algorithm as the one used currently by the ASIC to the seed, and return
- * both hashes in the lower and higher word of the return value since only 12 bit of
- * the hash are significant
- */
-static u32 rtl930x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed)
-{
-	u32 k0, k1, h1, h2, h;
-
-	k0 = (u32) (((seed >> 55) & 0x1f) ^ ((seed >> 44) & 0x7ff)
-		^ ((seed >> 33) & 0x7ff) ^ ((seed >> 22) & 0x7ff)
-		^ ((seed >> 11) & 0x7ff) ^ (seed & 0x7ff));
-
-	h1 = (seed >> 11) & 0x7ff;
-	h1 = ((h1 & 0x1f) << 6) | ((h1 >> 5) & 0x3f);
-
-	h2 = (seed >> 33) & 0x7ff;
-	h2 = ((h2 & 0x3f) << 5)| ((h2 >> 6) & 0x3f);
-
-	k1 = (u32) (((seed << 55) & 0x1f) ^ ((seed >> 44) & 0x7ff) ^ h2
-		    ^ ((seed >> 22) & 0x7ff) ^ h1
-		    ^ (seed & 0x7ff));
-
-	// Algorithm choice for block 0
-	if (sw_r32(RTL930X_L2_CTRL) & BIT(0))
-		h = k1;
-	else
-		h = k0;
-
-	/* Algorithm choice for block 1
-	 * Since k0 and k1 are < 2048, adding 2048 will offset the hash into the second
-	 * half of hash-space
-	 * 2048 is in fact the hash-table size 16384 divided by 4 hashes per bucket
-	 * divided by 2 to divide the hash space in 2
-	 */
-	if (sw_r32(RTL930X_L2_CTRL) & BIT(1))
-		h |= (k1 + 2048) << 16;
-	else
-		h |= (k0 + 2048) << 16;
-
-	return h;
-}
-
-/*
- * Fills an L2 entry structure from the SoC registers
- */
-static void rtl930x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e)
-{
-	pr_debug("In %s valid?\n", __func__);
-	e->valid = !!(r[2] & BIT(31));
-	if (!e->valid)
-		return;
-
-	pr_debug("In %s is valid\n", __func__);
-	e->is_ip_mc = false;
-	e->is_ipv6_mc = false;
-
-	// TODO: Is there not a function to copy directly MAC memory?
-	e->mac[0] = (r[0] >> 24);
-	e->mac[1] = (r[0] >> 16);
-	e->mac[2] = (r[0] >> 8);
-	e->mac[3] = r[0];
-	e->mac[4] = (r[1] >> 24);
-	e->mac[5] = (r[1] >> 16);
-
-	e->next_hop = !!(r[2] & BIT(12));
-	e->rvid = r[1] & 0xfff;
-
-	/* Is it a unicast entry? check multicast bit */
-	if (!(e->mac[0] & 1)) {
-		e->type = L2_UNICAST;
-		e->is_static = !!(r[2] & BIT(14));
-		e->port = (r[2] >> 20) & 0x3ff;
-		// Check for trunk port
-		if (r[2] & BIT(30)) {
-			e->is_trunk = true;
-			e->stack_dev = (e->port >> 9) & 1;
-			e->trunk = e->port & 0x3f;
-		} else {
-			e->is_trunk = false;
-			e->stack_dev = (e->port >> 6) & 0xf;
-			e->port = e->port & 0x3f;
-		}
-
-		e->block_da = !!(r[2] & BIT(15));
-		e->block_sa = !!(r[2] & BIT(16));
-		e->suspended = !!(r[2] & BIT(13));
-		e->age = (r[2] >> 17) & 3;
-		e->valid = true;
-		// the UC_VID field in hardware is used for the VID or for the route id
-		if (e->next_hop) {
-			e->nh_route_id = r[2] & 0x7ff;
-			e->vid = 0;
-		} else {
-			e->vid = r[2] & 0xfff;
-			e->nh_route_id = 0;
-		}
-	} else {
-		e->valid = true;
-		e->type = L2_MULTICAST;
-		e->mc_portmask_index = (r[2] >> 16) & 0x3ff;
-	}
-}
-
-/*
- * Fills the 3 SoC table registers r[] with the information of in the rtl838x_l2_entry
- */
-static void rtl930x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e)
-{
-	u32 port;
-
-	if (!e->valid) {
-		r[0] = r[1] = r[2] = 0;
-		return;
-	}
-
-	r[2] = BIT(31);	// Set valid bit
-
-	r[0] = ((u32)e->mac[0]) << 24 | ((u32)e->mac[1]) << 16 
-		| ((u32)e->mac[2]) << 8 | ((u32)e->mac[3]);
-	r[1] = ((u32)e->mac[4]) << 24 | ((u32)e->mac[5]) << 16;
-
-	r[2] |= e->next_hop ? BIT(12) : 0;
-
-	if (e->type == L2_UNICAST) {
-		r[2] |= e->is_static ? BIT(14) : 0;
-		r[1] |= e->rvid & 0xfff;
-		r[2] |= (e->port & 0x3ff) << 20;
-		if (e->is_trunk) {
-			r[2] |= BIT(30);
-			port = e->stack_dev << 9 | (e->port & 0x3f);
-		} else {
-			port = (e->stack_dev & 0xf) << 6;
-			port |= e->port & 0x3f;
-		}
-		r[2] |= port << 20;
-		r[2] |= e->block_da ? BIT(15) : 0;
-		r[2] |= e->block_sa ? BIT(17) : 0;
-		r[2] |= e->suspended ? BIT(13) : 0;
-		r[2] |= (e->age & 0x3) << 17;
-		// the UC_VID field in hardware is used for the VID or for the route id
-		if (e->next_hop)
-			r[2] |= e->nh_route_id & 0x7ff;
-		else
-			r[2] |= e->vid & 0xfff;
-	} else { // L2_MULTICAST
-		r[2] |= (e->mc_portmask_index & 0x3ff) << 16;
-		r[2] |= e->mc_mac_index & 0x7ff;
-	}
-}
-
-/*
- * Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table
- * hash is the id of the bucket and pos is the position of the entry in that bucket
- * The data read from the SoC is filled into rtl838x_l2_entry
- */
-static u64 rtl930x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e)
-{
-	u32 r[3];
-	struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 0);
-	u32 idx;
-	int i;
-	u64 mac;
-	u64 seed;
-
-	pr_debug("%s: hash %08x, pos: %d\n", __func__, hash, pos);
-
-	/* On the RTL93xx, 2 different hash algorithms are used making it a total of
-	 * 8 buckets that need to be searched, 4 for each hash-half
-	 * Use second hash space when bucket is between 4 and 8 */
-	if (pos >= 4) {
-		pos -= 4;
-		hash >>= 16;
-	} else {
-		hash &= 0xffff;
-	}
-
-	idx = (0 << 14) | (hash << 2) | pos; // Search SRAM, with hash and at pos in bucket
-	pr_debug("%s: NOW hash %08x, pos: %d\n", __func__, hash, pos);
-
-	rtl_table_read(q, idx);
-	for (i = 0; i < 3; i++)
-		r[i] = sw_r32(rtl_table_data(q, i));
-
-	rtl_table_release(q);
-
-	rtl930x_fill_l2_entry(r, e);
-
-	pr_debug("%s: valid: %d, nh: %d\n", __func__, e->valid, e->next_hop);
-	if (!e->valid)
-		return 0;
-
-	mac = ((u64)e->mac[0]) << 40 | ((u64)e->mac[1]) << 32 | ((u64)e->mac[2]) << 24
-		| ((u64)e->mac[3]) << 16 | ((u64)e->mac[4]) << 8 | ((u64)e->mac[5]);
-
-	seed = rtl930x_l2_hash_seed(mac, e->rvid);
-	pr_debug("%s: mac %016llx, seed %016llx\n", __func__, mac, seed);
-	// return vid with concatenated mac as unique id
-	return seed;
-}
-
-static void rtl930x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e)
-{
-	u32 r[3];
-	struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 0);
-	u32 idx = (0 << 14) | (hash << 2) | pos; // Access SRAM, with hash and at pos in bucket
-	int i;
-
-	pr_debug("%s: hash %d, pos %d\n", __func__, hash, pos);
-	pr_debug("%s: index %d -> mac %02x:%02x:%02x:%02x:%02x:%02x\n", __func__, idx,
-		e->mac[0], e->mac[1], e->mac[2], e->mac[3],e->mac[4],e->mac[5]);
-
-	rtl930x_fill_l2_row(r, e);
-
-	for (i= 0; i < 3; i++)
-		sw_w32(r[i], rtl_table_data(q, i));
-
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-}
-
-static u64 rtl930x_read_cam(int idx, struct rtl838x_l2_entry *e)
-{
-	u32 r[3];
-	struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 1);
-	int i;
-
-	rtl_table_read(q, idx);
-	for (i= 0; i < 3; i++)
-		r[i] = sw_r32(rtl_table_data(q, i));
-
-	rtl_table_release(q);
-
-	rtl930x_fill_l2_entry(r, e);
-	if (!e->valid)
-		return 0;
-
-	// return mac with concatenated vid as unique id
-	return ((u64)r[0] << 28) | ((r[1] & 0xffff0000) >> 4) | e->vid;
-}
-
-static void rtl930x_write_cam(int idx, struct rtl838x_l2_entry *e)
-{
-	u32 r[3];
-	struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 1); // Access L2 Table 1
-	int i;
-
-	rtl930x_fill_l2_row(r, e);
-
-	for (i= 0; i < 3; i++)
-		sw_w32(r[i], rtl_table_data(q, i));
-
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-}
-
-static u64 rtl930x_read_mcast_pmask(int idx)
-{
-	u32 portmask;
-	// Read MC_PORTMASK (2) via register RTL9300_TBL_L2
-	struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 2);
-
-	rtl_table_read(q, idx);
-	portmask = sw_r32(rtl_table_data(q, 0));
-	portmask >>= 3;
-	rtl_table_release(q);
-
-	pr_debug("%s: Index idx %d has portmask %08x\n", __func__, idx, portmask);
-	return portmask;
-}
-
-static void rtl930x_write_mcast_pmask(int idx, u64 portmask)
-{
-	u32 pm = portmask;
-
-	// Access MC_PORTMASK (2) via register RTL9300_TBL_L2
-	struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 2);
-
-	pr_debug("%s: Index idx %d has portmask %08x\n", __func__, idx, pm);
-	pm <<= 3;
-	sw_w32(pm, rtl_table_data(q, 0));
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-}
-
-u64 rtl930x_traffic_get(int source)
-{
-	u32 v;
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6);
-
-	rtl_table_read(r, source);
-	v = sw_r32(rtl_table_data(r, 0));
-	rtl_table_release(r);
-	return v >> 3;
-}
-
-/*
- * Enable traffic between a source port and a destination port matrix
- */
-void rtl930x_traffic_set(int source, u64 dest_matrix)
-{
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6);
-
-	sw_w32((dest_matrix << 3), rtl_table_data(r, 0));
-	rtl_table_write(r, source);
-	rtl_table_release(r);
-}
-
-void rtl930x_traffic_enable(int source, int dest)
-{
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6);
-	rtl_table_read(r, source);
-	sw_w32_mask(0, BIT(dest + 3), rtl_table_data(r, 0));
-	rtl_table_write(r, source);
-	rtl_table_release(r);
-}
-
-void rtl930x_traffic_disable(int source, int dest)
-{
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6);
-	rtl_table_read(r, source);
-	sw_w32_mask(BIT(dest + 3), 0, rtl_table_data(r, 0));
-	rtl_table_write(r, source);
-	rtl_table_release(r);
-}
-
-void rtl9300_dump_debug(void)
-{
-	int i;
-	u16 r = RTL930X_STAT_PRVTE_DROP_COUNTER0;
-
-	for (i = 0; i < 10; i ++) {
-		pr_info("# %d %08x %08x %08x %08x %08x %08x %08x %08x\n", i * 8,
-			sw_r32(r), sw_r32(r + 4), sw_r32(r + 8), sw_r32(r + 12),
-			sw_r32(r + 16), sw_r32(r + 20), sw_r32(r + 24), sw_r32(r + 28));
-		r += 32;
-	}
-	pr_info("# %08x %08x %08x %08x %08x\n",
-		sw_r32(r), sw_r32(r + 4), sw_r32(r + 8), sw_r32(r + 12), sw_r32(r + 16));
-	rtl930x_print_matrix();
-	pr_info("RTL930X_L2_PORT_SABLK_CTRL: %08x, RTL930X_L2_PORT_DABLK_CTRL %08x\n",
-		sw_r32(RTL930X_L2_PORT_SABLK_CTRL), sw_r32(RTL930X_L2_PORT_DABLK_CTRL)
-
-	);
-}
-
-irqreturn_t rtl930x_switch_irq(int irq, void *dev_id)
-{
-	struct dsa_switch *ds = dev_id;
-	u32 ports = sw_r32(RTL930X_ISR_PORT_LINK_STS_CHG);
-	u32 link;
-	int i;
-
-	/* Clear status */
-	sw_w32(ports, RTL930X_ISR_PORT_LINK_STS_CHG);
-
-	for (i = 0; i < 28; i++) {
-		if (ports & BIT(i)) {
-			/* Read the register twice because of issues with latency at least
-			 * with the external RTL8226 PHY on the XGS1210 */
-			link = sw_r32(RTL930X_MAC_LINK_STS);
-			link = sw_r32(RTL930X_MAC_LINK_STS);
-			if (link & BIT(i))
-				dsa_port_phylink_mac_change(ds, i, true);
-			else
-				dsa_port_phylink_mac_change(ds, i, false);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-int rtl930x_write_phy(u32 port, u32 page, u32 reg, u32 val)
-{
-	u32 v;
-	int err = 0;
-
-	pr_debug("%s: port %d, page: %d, reg: %x, val: %x\n", __func__, port, page, reg, val);
-
-	if (port > 63 || page > 4095 || reg > 31)
-		return -ENOTSUPP;
-
-	val &= 0xffff;
-	mutex_lock(&smi_lock);
-
-	sw_w32(BIT(port), RTL930X_SMI_ACCESS_PHY_CTRL_0);
-	sw_w32_mask(0xffff << 16, val << 16, RTL930X_SMI_ACCESS_PHY_CTRL_2);
-	v = reg << 20 | page << 3 | 0x1f << 15 | BIT(2) | BIT(0);
-	sw_w32(v, RTL930X_SMI_ACCESS_PHY_CTRL_1);
-
-	do {
-		v = sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_1);
-	} while (v & 0x1);
-
-	if (v & 0x2)
-		err = -EIO;
-
-	mutex_unlock(&smi_lock);
-
-	return err;
-}
-
-int rtl930x_read_phy(u32 port, u32 page, u32 reg, u32 *val)
-{
-	u32 v;
-	int err = 0;
-
-	if (port > 63 || page > 4095 || reg > 31)
-		return -ENOTSUPP;
-
-	mutex_lock(&smi_lock);
-
-	sw_w32_mask(0xffff << 16, port << 16, RTL930X_SMI_ACCESS_PHY_CTRL_2);
-	v = reg << 20 | page << 3 | 0x1f << 15 | 1;
-	sw_w32(v, RTL930X_SMI_ACCESS_PHY_CTRL_1);
-
-	do {
-		v = sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_1);
-	} while ( v & 0x1);
-
-	if (v & BIT(25)) {
-		pr_debug("Error reading phy %d, register %d\n", port, reg);
-		err = -EIO;
-	}
-	*val = (sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_2) & 0xffff);
-
-	pr_debug("%s: port %d, page: %d, reg: %x, val: %x\n", __func__, port, page, reg, *val);
-
-	mutex_unlock(&smi_lock);
-
-	return err;
-}
-
-/*
- * Write to an mmd register of the PHY
- */
-int rtl930x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val)
-{
-	int err = 0;
-	u32 v;
-
-	mutex_lock(&smi_lock);
-
-	// Set PHY to access
-	sw_w32(BIT(port), RTL930X_SMI_ACCESS_PHY_CTRL_0);
-
-	// Set data to write
-	sw_w32_mask(0xffff << 16, val << 16, RTL930X_SMI_ACCESS_PHY_CTRL_2);
-
-	// Set MMD device number and register to write to
-	sw_w32(devnum << 16 | (regnum & 0xffff), RTL930X_SMI_ACCESS_PHY_CTRL_3);
-
-	v = BIT(2) | BIT(1) | BIT(0); // WRITE | MMD-access | EXEC
-	sw_w32(v, RTL930X_SMI_ACCESS_PHY_CTRL_1);
-
-	do {
-		v = sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_1);
-	} while (v & BIT(0));
-
-	pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, val, err);
-	mutex_unlock(&smi_lock);
-	return err;
-}
-
-/*
- * Read an mmd register of the PHY
- */
-int rtl930x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val)
-{
-	int err = 0;
-	u32 v;
-
-	mutex_lock(&smi_lock);
-
-	// Set PHY to access
-	sw_w32_mask(0xffff << 16, port << 16, RTL930X_SMI_ACCESS_PHY_CTRL_2);
-
-	// Set MMD device number and register to write to
-	sw_w32(devnum << 16 | (regnum & 0xffff), RTL930X_SMI_ACCESS_PHY_CTRL_3);
-
-	v = BIT(1) | BIT(0); // MMD-access | EXEC
-	sw_w32(v, RTL930X_SMI_ACCESS_PHY_CTRL_1);
-
-	do {
-		v = sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_1);
-	} while (v & BIT(0));
-	// There is no error-checking via BIT 25 of v, as it does not seem to be set correctly
-	*val = (sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_2) & 0xffff);
-	pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, *val, err);
-
-	mutex_unlock(&smi_lock);
-
-	return err;
-}
-
-/*
- * Calculate both the block 0 and the block 1 hash, and return in
- * lower and higher word of the return value since only 12 bit of
- * the hash are significant
- */
-u32 rtl930x_hash(struct rtl838x_switch_priv *priv, u64 seed)
-{
-	u32 k0, k1, h1, h2, h;
-
-	k0 = (u32) (((seed >> 55) & 0x1f) ^ ((seed >> 44) & 0x7ff)
-		^ ((seed >> 33) & 0x7ff) ^ ((seed >> 22) & 0x7ff)
-		^ ((seed >> 11) & 0x7ff) ^ (seed & 0x7ff));
-
-	h1 = (seed >> 11) & 0x7ff;
-	h1 = ((h1 & 0x1f) << 6) | ((h1 >> 5) & 0x3f);
-
-	h2 = (seed >> 33) & 0x7ff;
-	h2 = ((h2 & 0x3f) << 5)| ((h2 >> 6) & 0x3f);
-
-	k1 = (u32) (((seed << 55) & 0x1f) ^ ((seed >> 44) & 0x7ff) ^ h2
-		    ^ ((seed >> 22) & 0x7ff) ^ h1
-		    ^ (seed & 0x7ff));
-
-	// Algorithm choice for block 0
-	if (sw_r32(RTL930X_L2_CTRL) & BIT(0))
-		h = k1;
-	else
-		h = k0;
-
-	/* Algorithm choice for block 1
-	 * Since k0 and k1 are < 2048, adding 2048 will offset the hash into the second
-	 * half of hash-space
-	 * 2048 is in fact the hash-table size 16384 divided by 4 hashes per bucket
-	 * divided by 2 to divide the hash space in 2
-	 */
-	if (sw_r32(RTL930X_L2_CTRL) & BIT(1))
-		h |= (k1 + 2048) << 16;
-	else
-		h |= (k0 + 2048) << 16;
-
-	return h;
-}
-
-/*
- * Enables or disables the EEE/EEEP capability of a port
- */
-void rtl930x_port_eee_set(struct rtl838x_switch_priv *priv, int port, bool enable)
-{
-	u32 v;
-
-	// This works only for Ethernet ports, and on the RTL930X, ports from 26 are SFP
-	if (port >= 26)
-		return;
-
-	pr_debug("In %s: setting port %d to %d\n", __func__, port, enable);
-	v = enable ? 0x3f : 0x0;
-
-	// Set EEE/EEEP state for 100, 500, 1000MBit and 2.5, 5 and 10GBit
-	sw_w32_mask(0, v << 10, rtl930x_mac_force_mode_ctrl(port));
-
-	// Set TX/RX EEE state
-	v = enable ? 0x3 : 0x0;
-	sw_w32(v, RTL930X_EEE_CTRL(port));
-
-	priv->ports[port].eee_enabled = enable;
-}
-
-/*
- * Get EEE own capabilities and negotiation result
- */
-int rtl930x_eee_port_ability(struct rtl838x_switch_priv *priv, struct ethtool_eee *e, int port)
-{
-	u32 link, a;
-
-	if (port >= 26)
-		return -ENOTSUPP;
-
-	pr_info("In %s, port %d\n", __func__, port);
-	link = sw_r32(RTL930X_MAC_LINK_STS);
-	link = sw_r32(RTL930X_MAC_LINK_STS);
-	if (!(link & BIT(port)))
-		return 0;
-
-	pr_info("Setting advertised\n");
-	if (sw_r32(rtl930x_mac_force_mode_ctrl(port)) & BIT(10))
-		e->advertised |= ADVERTISED_100baseT_Full;
-
-	if (sw_r32(rtl930x_mac_force_mode_ctrl(port)) & BIT(12))
-		e->advertised |= ADVERTISED_1000baseT_Full;
-
-	if (priv->ports[port].is2G5 && sw_r32(rtl930x_mac_force_mode_ctrl(port)) & BIT(13)) {
-		pr_info("ADVERTISING 2.5G EEE\n");
-		e->advertised |= ADVERTISED_2500baseX_Full;
-	}
-
-	if (priv->ports[port].is10G && sw_r32(rtl930x_mac_force_mode_ctrl(port)) & BIT(15))
-		e->advertised |= ADVERTISED_10000baseT_Full;
-
-	a = sw_r32(RTL930X_MAC_EEE_ABLTY);
-	a = sw_r32(RTL930X_MAC_EEE_ABLTY);
-	pr_info("Link partner: %08x\n", a);
-	if (a & BIT(port)) {
-		e->lp_advertised = ADVERTISED_100baseT_Full;
-		e->lp_advertised |= ADVERTISED_1000baseT_Full;
-		if (priv->ports[port].is2G5)
-			e->lp_advertised |= ADVERTISED_2500baseX_Full;
-		if (priv->ports[port].is10G)
-			e->lp_advertised |= ADVERTISED_10000baseT_Full;
-	}
-
-	// Read 2x to clear latched state
-	a = sw_r32(RTL930X_EEEP_PORT_CTRL(port));
-	a = sw_r32(RTL930X_EEEP_PORT_CTRL(port));
-	pr_info("%s RTL930X_EEEP_PORT_CTRL: %08x\n", __func__, a);
-
-	return 0;
-}
-
-static void rtl930x_init_eee(struct rtl838x_switch_priv *priv, bool enable)
-{
-	int i;
-
-	pr_info("Setting up EEE, state: %d\n", enable);
-
-	// Setup EEE on all ports
-	for (i = 0; i < priv->cpu_port; i++) {
-		if (priv->ports[i].phy)
-			rtl930x_port_eee_set(priv, i, enable);
-	}
-
-	priv->eee_enabled = enable;
-}
-#define HASH_PICK(val, lsb, len)   ((val & (((1 << len) - 1) << lsb)) >> lsb)
-
-static u32 rtl930x_l3_hash4(u32 ip, int algorithm, bool move_dip)
-{
-	u32 rows[4];
-	u32 hash;
-	u32 s0, s1, pH;
-
-	memset(rows, 0, sizeof(rows));
-
-	rows[0] = HASH_PICK(ip, 27, 5);
-	rows[1] = HASH_PICK(ip, 18, 9);
-	rows[2] = HASH_PICK(ip, 9, 9);
-
-	if (!move_dip)
-		rows[3] = HASH_PICK(ip, 0, 9);
-
-	if (!algorithm) {
-		hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3];
-	} else {
-		s0 = rows[0] + rows[1] + rows[2];
-		s1 = (s0 & 0x1ff) + ((s0 & (0x1ff << 9)) >> 9);
-		pH = (s1 & 0x1ff) + ((s1 & (0x1ff << 9)) >> 9);
-		hash = pH ^ rows[3];
-	}
-	return hash;
-}
-
-static u32 rtl930x_l3_hash6(struct in6_addr *ip6, int algorithm, bool move_dip)
-{
-	u32 rows[16];
-	u32 hash;
-	u32 s0, s1, pH;
-
-	rows[0] = (HASH_PICK(ip6->s6_addr[0], 6, 2) << 0);
-	rows[1] = (HASH_PICK(ip6->s6_addr[0], 0, 6) << 3) | HASH_PICK(ip6->s6_addr[1], 5, 3);
-	rows[2] = (HASH_PICK(ip6->s6_addr[1], 0, 5) << 4) | HASH_PICK(ip6->s6_addr[2], 4, 4);
-	rows[3] = (HASH_PICK(ip6->s6_addr[2], 0, 4) << 5) | HASH_PICK(ip6->s6_addr[3], 3, 5);
-	rows[4] = (HASH_PICK(ip6->s6_addr[3], 0, 3) << 6) | HASH_PICK(ip6->s6_addr[4], 2, 6);
-	rows[5] = (HASH_PICK(ip6->s6_addr[4], 0, 2) << 7) | HASH_PICK(ip6->s6_addr[5], 1, 7);
-	rows[6] = (HASH_PICK(ip6->s6_addr[5], 0, 1) << 8) | HASH_PICK(ip6->s6_addr[6], 0, 8);
-	rows[7] = (HASH_PICK(ip6->s6_addr[7], 0, 8) << 1) | HASH_PICK(ip6->s6_addr[8], 7, 1);
-	rows[8] = (HASH_PICK(ip6->s6_addr[8], 0, 7) << 2) | HASH_PICK(ip6->s6_addr[9], 6, 2);
-	rows[9] = (HASH_PICK(ip6->s6_addr[9], 0, 6) << 3) | HASH_PICK(ip6->s6_addr[10], 5, 3);
-	rows[10] = (HASH_PICK(ip6->s6_addr[10], 0, 5) << 4) | HASH_PICK(ip6->s6_addr[11], 4, 4);
-	if (!algorithm) {
-		rows[11] = (HASH_PICK(ip6->s6_addr[11], 0, 4) << 5)
-				| (HASH_PICK(ip6->s6_addr[12], 3, 5) << 0);
-		rows[12] = (HASH_PICK(ip6->s6_addr[12], 0, 3) << 6)
-				| (HASH_PICK(ip6->s6_addr[13], 2, 6) << 0);
-		rows[13] = (HASH_PICK(ip6->s6_addr[13], 0, 2) << 7)
-				| (HASH_PICK(ip6->s6_addr[14], 1, 7) << 0);
-		if (!move_dip) {
-			rows[14] = (HASH_PICK(ip6->s6_addr[14], 0, 1) << 8)
-					| (HASH_PICK(ip6->s6_addr[15], 0, 8) << 0);
-		}
-		hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3] ^ rows[4] ^ rows[5] ^ rows[6]
-			^ rows[7] ^ rows[8] ^ rows[9] ^ rows[10] ^ rows[11] ^ rows[12]
-			^ rows[13] ^ rows[14];
-	} else {
-		rows[11] = (HASH_PICK(ip6->s6_addr[11], 0, 4) << 5);
-		rows[12] = (HASH_PICK(ip6->s6_addr[12], 3, 5) << 0);
-		rows[13] = (HASH_PICK(ip6->s6_addr[12], 0, 3) << 6)
-				| HASH_PICK(ip6->s6_addr[13], 2, 6);
-		rows[14] = (HASH_PICK(ip6->s6_addr[13], 0, 2) << 7)
-				| HASH_PICK(ip6->s6_addr[14], 1, 7);
-		if (!move_dip) {
-			rows[15] = (HASH_PICK(ip6->s6_addr[14], 0, 1) << 8)
-					| (HASH_PICK(ip6->s6_addr[15], 0, 8) << 0);
-		}
-		s0 = rows[12] + rows[13] + rows[14];
-		s1 = (s0 & 0x1ff) + ((s0 & (0x1ff << 9)) >> 9);
-		pH = (s1 & 0x1ff) + ((s1 & (0x1ff << 9)) >> 9);
-		hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3] ^ rows[4] ^ rows[5] ^ rows[6]
-			^ rows[7] ^ rows[8] ^ rows[9] ^ rows[10] ^ rows[11] ^ pH ^ rows[15];
-	}
-	return hash;
-}
-
-/*
- * Read a prefix route entry from the L3_PREFIX_ROUTE_IPUC table
- * We currently only support IPv4 and IPv6 unicast route
- */
-static void rtl930x_route_read(int idx, struct rtl83xx_route *rt)
-{
-	u32 v, ip4_m;
-	bool host_route, default_route;
-	struct in6_addr ip6_m;
-
-	// Read L3_PREFIX_ROUTE_IPUC table (2) via register RTL9300_TBL_1
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 2);
-
-	rtl_table_read(r, idx);
-	// The table has a size of 11 registers
-	rt->attr.valid = !!(sw_r32(rtl_table_data(r, 0)) & BIT(31));
-	if (!rt->attr.valid)
-		goto out;
-
-	rt->attr.type = (sw_r32(rtl_table_data(r, 0)) >> 29) & 0x3;
-
-	v = sw_r32(rtl_table_data(r, 10));
-	host_route = !!(v & BIT(21));
-	default_route = !!(v & BIT(20));
-	rt->prefix_len = -1;
-	pr_info("%s: host route %d, default_route %d\n", __func__, host_route, default_route);
-
-	switch (rt->attr.type) {
-	case 0: // IPv4 Unicast route
-		rt->dst_ip = sw_r32(rtl_table_data(r, 4));
-		ip4_m = sw_r32(rtl_table_data(r, 9));
-		pr_info("%s: Read ip4 mask: %08x\n", __func__, ip4_m);
-		rt->prefix_len = host_route ? 32 : -1;
-		rt->prefix_len = (rt->prefix_len < 0 && default_route) ? 0 : -1;
-		if (rt->prefix_len < 0)
-			rt->prefix_len = inet_mask_len(ip4_m);
-		break;
-	case 2: // IPv6 Unicast route
-		ipv6_addr_set(&rt->dst_ip6,
-			      sw_r32(rtl_table_data(r, 1)), sw_r32(rtl_table_data(r, 2)),
-			      sw_r32(rtl_table_data(r, 3)), sw_r32(rtl_table_data(r, 4)));
-		ipv6_addr_set(&ip6_m,
-			      sw_r32(rtl_table_data(r, 6)), sw_r32(rtl_table_data(r, 7)),
-			      sw_r32(rtl_table_data(r, 8)), sw_r32(rtl_table_data(r, 9)));
-		rt->prefix_len = host_route ? 128 : 0;
-		rt->prefix_len = (rt->prefix_len < 0 && default_route) ? 0 : -1;
-		if (rt->prefix_len < 0)
-			rt->prefix_len = find_last_bit((unsigned long int *)&ip6_m.s6_addr32,
-							 128);
-		break;
-	case 1: // IPv4 Multicast route
-	case 3: // IPv6 Multicast route
-		pr_warn("%s: route type not supported\n", __func__);
-		goto out;
-	}
-
-	rt->attr.hit = !!(v & BIT(22));
-	rt->attr.action = (v >> 18) & 3;
-	rt->nh.id = (v >> 7) & 0x7ff;
-	rt->attr.ttl_dec = !!(v & BIT(6));
-	rt->attr.ttl_check = !!(v & BIT(5));
-	rt->attr.dst_null = !!(v & BIT(4));
-	rt->attr.qos_as = !!(v & BIT(3));
-	rt->attr.qos_prio =  v & 0x7;
-	pr_info("%s: index %d is valid: %d\n", __func__, idx, rt->attr.valid);
-	pr_info("%s: next_hop: %d, hit: %d, action :%d, ttl_dec %d, ttl_check %d, dst_null %d\n",
-		__func__, rt->nh.id, rt->attr.hit, rt->attr.action,
-		rt->attr.ttl_dec, rt->attr.ttl_check, rt->attr.dst_null);
-	pr_info("%s: GW: %pI4, prefix_len: %d\n", __func__, &rt->dst_ip, rt->prefix_len);
-out:
-	rtl_table_release(r);
-}
-
-static void rtl930x_net6_mask(int prefix_len, struct in6_addr *ip6_m)
-{
-	int o, b;
-	// Define network mask
-	o = prefix_len >> 3;
-	b = prefix_len & 0x7;
-	memset(ip6_m->s6_addr, 0xff, o);
-	ip6_m->s6_addr[o] |= b ? 0xff00 >> b : 0x00;
-}
-
-/*
- * Read a host route entry from the table using its index
- * We currently only support IPv4 and IPv6 unicast route
- */
-static void rtl930x_host_route_read(int idx, struct rtl83xx_route *rt)
-{
-	u32 v;
-	// Read L3_HOST_ROUTE_IPUC table (1) via register RTL9300_TBL_1
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 1);
-
-	idx = ((idx / 6) * 8) + (idx % 6);
-
-	pr_debug("In %s, physical index %d\n", __func__, idx);
-	rtl_table_read(r, idx);
-	// The table has a size of 5 (for UC, 11 for MC) registers
-	v = sw_r32(rtl_table_data(r, 0));
-	rt->attr.valid = !!(v & BIT(31));
-	if (!rt->attr.valid)
-		goto out;
-	rt->attr.type = (v >> 29) & 0x3;
-	switch (rt->attr.type) {
-	case 0: // IPv4 Unicast route
-		rt->dst_ip = sw_r32(rtl_table_data(r, 4));
-		break;
-	case 2: // IPv6 Unicast route
-		ipv6_addr_set(&rt->dst_ip6,
-			      sw_r32(rtl_table_data(r, 3)), sw_r32(rtl_table_data(r, 2)),
-			      sw_r32(rtl_table_data(r, 1)), sw_r32(rtl_table_data(r, 0)));
-		break;
-	case 1: // IPv4 Multicast route
-	case 3: // IPv6 Multicast route
-		pr_warn("%s: route type not supported\n", __func__);
-		goto out;
-	}
-
-	rt->attr.hit = !!(v & BIT(20));
-	rt->attr.dst_null = !!(v & BIT(19));
-	rt->attr.action = (v >> 17) & 3;
-	rt->nh.id = (v >> 6) & 0x7ff;
-	rt->attr.ttl_dec = !!(v & BIT(5));
-	rt->attr.ttl_check = !!(v & BIT(4));
-	rt->attr.qos_as = !!(v & BIT(3));
-	rt->attr.qos_prio =  v & 0x7;
-	pr_debug("%s: index %d is valid: %d\n", __func__, idx, rt->attr.valid);
-	pr_debug("%s: next_hop: %d, hit: %d, action :%d, ttl_dec %d, ttl_check %d, dst_null %d\n",
-		__func__, rt->nh.id, rt->attr.hit, rt->attr.action, rt->attr.ttl_dec, rt->attr.ttl_check,
-		rt->attr.dst_null);
-	pr_debug("%s: Destination: %pI4\n", __func__, &rt->dst_ip);
-
-out:
-	rtl_table_release(r);
-}
-
-/*
- * Write a host route entry from the table using its index
- * We currently only support IPv4 and IPv6 unicast route
- */
-static void rtl930x_host_route_write(int idx, struct rtl83xx_route *rt)
-{
-	u32 v;
-	// Access L3_HOST_ROUTE_IPUC table (1) via register RTL9300_TBL_1
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 1);
-	// The table has a size of 5 (for UC, 11 for MC) registers
-
-	idx = ((idx / 6) * 8) + (idx % 6);
-
-	pr_debug("%s: index %d is valid: %d\n", __func__, idx, rt->attr.valid);
-	pr_debug("%s: next_hop: %d, hit: %d, action :%d, ttl_dec %d, ttl_check %d, dst_null %d\n",
-		__func__, rt->nh.id, rt->attr.hit, rt->attr.action, rt->attr.ttl_dec, rt->attr.ttl_check,
-		rt->attr.dst_null);
-	pr_debug("%s: GW: %pI4, prefix_len: %d\n", __func__, &rt->dst_ip, rt->prefix_len);
-
-	v = BIT(31); // Entry is valid
-	v |= (rt->attr.type & 0x3) << 29;
-	v |= rt->attr.hit ? BIT(20) : 0;
-	v |= rt->attr.dst_null ? BIT(19) : 0;
-	v |= (rt->attr.action & 0x3) << 17;
-	v |= (rt->nh.id & 0x7ff) << 6;
-	v |= rt->attr.ttl_dec ? BIT(5) : 0;
-	v |= rt->attr.ttl_check ? BIT(4) : 0;
-	v |= rt->attr.qos_as ? BIT(3) : 0;
-	v |= rt->attr.qos_prio & 0x7;
-
-	sw_w32(v, rtl_table_data(r, 0));
-	switch (rt->attr.type) {
-	case 0: // IPv4 Unicast route
-		sw_w32(0, rtl_table_data(r, 1));
-		sw_w32(0, rtl_table_data(r, 2));
-		sw_w32(0, rtl_table_data(r, 3));
-		sw_w32(rt->dst_ip, rtl_table_data(r, 4));
-		break;
-	case 2: // IPv6 Unicast route
-		sw_w32(rt->dst_ip6.s6_addr32[0], rtl_table_data(r, 1));
-		sw_w32(rt->dst_ip6.s6_addr32[1], rtl_table_data(r, 2));
-		sw_w32(rt->dst_ip6.s6_addr32[2], rtl_table_data(r, 3));
-		sw_w32(rt->dst_ip6.s6_addr32[3], rtl_table_data(r, 4));
-		break;
-	case 1: // IPv4 Multicast route
-	case 3: // IPv6 Multicast route
-		pr_warn("%s: route type not supported\n", __func__);
-		goto out;
-	}
-
-	rtl_table_write(r, idx);
-
-out:
-	rtl_table_release(r);
-}
-
-/*
- * Look up the index of a prefix route in the routing table CAM for unicast IPv4/6 routes
- * using hardware offload.
- */
-static int rtl930x_route_lookup_hw(struct rtl83xx_route *rt)
-{
-	u32 ip4_m, v;
-	struct in6_addr ip6_m;
-	int i;
-
-	if (rt->attr.type == 1 || rt->attr.type == 3) // Hardware only supports UC routes
-		return -1;
-
-	sw_w32_mask(0x3 << 19, rt->attr.type, RTL930X_L3_HW_LU_KEY_CTRL);
-	if (rt->attr.type) { // IPv6
-		rtl930x_net6_mask(rt->prefix_len, &ip6_m);
-		for (i = 0; i < 4; i++)
-			sw_w32(rt->dst_ip6.s6_addr32[0] & ip6_m.s6_addr32[0],
-			       RTL930X_L3_HW_LU_KEY_IP_CTRL + (i << 2));
-	} else { // IPv4
-		ip4_m = inet_make_mask(rt->prefix_len);
-		sw_w32(0, RTL930X_L3_HW_LU_KEY_IP_CTRL);
-		sw_w32(0, RTL930X_L3_HW_LU_KEY_IP_CTRL + 4);
-		sw_w32(0, RTL930X_L3_HW_LU_KEY_IP_CTRL + 8);
-		v = rt->dst_ip & ip4_m;
-		pr_info("%s: searching for %pI4\n", __func__, &v);
-		sw_w32(v, RTL930X_L3_HW_LU_KEY_IP_CTRL + 12);
-	}
-
-	// Execute CAM lookup in SoC
-	sw_w32(BIT(15), RTL930X_L3_HW_LU_CTRL);
-
-	// Wait until execute bit clears and result is ready
-	do {
-		v = sw_r32(RTL930X_L3_HW_LU_CTRL);
-	} while (v & BIT(15));
-
-	pr_info("%s: found: %d, index: %d\n", __func__, !!(v & BIT(14)), v & 0x1ff);
-
-	// Test if search successful (BIT 14 set)
-	if (v & BIT(14))
-		return v & 0x1ff;
-
-	return -1;
-}
-
-static int rtl930x_find_l3_slot(struct rtl83xx_route *rt, bool must_exist)
-{
-	int t, s, slot_width, algorithm, addr, idx;
-	u32 hash;
-	struct rtl83xx_route route_entry;
-
-	// IPv6 entries take up 3 slots
-	slot_width = (rt->attr.type == 0) || (rt->attr.type == 2) ? 1 : 3;
-
-	for (t = 0; t < 2; t++) {
-		algorithm = (sw_r32(RTL930X_L3_HOST_TBL_CTRL) >> (2 + t)) & 0x1;
-		hash = rtl930x_l3_hash4(rt->dst_ip, algorithm, false);
-
-		pr_debug("%s: table %d, algorithm %d, hash %04x\n", __func__, t, algorithm, hash);
-
-		for (s = 0; s < 6; s += slot_width) {
-			addr = (t << 12) | ((hash & 0x1ff) << 3) | s;
-			pr_debug("%s physical address %d\n", __func__, addr);
-			idx = ((addr / 8) * 6) + (addr % 8);
-			pr_debug("%s logical address %d\n", __func__, idx);
-
-			rtl930x_host_route_read(idx, &route_entry);
-			pr_debug("%s route valid %d, route dest: %pI4, hit %d\n", __func__,
-				rt->attr.valid, &rt->dst_ip, rt->attr.hit);
-			if (!must_exist && rt->attr.valid)
-				return idx;
-			if (must_exist && route_entry.dst_ip == rt->dst_ip)
-				return idx;
-		}
-	}
-
-	return -1;
-}
-
-/*
- * Write a prefix route into the routing table CAM at position idx
- * Currently only IPv4 and IPv6 unicast routes are supported
- */
-static void rtl930x_route_write(int idx, struct rtl83xx_route *rt)
-{
-	u32 v, ip4_m;
-	struct in6_addr ip6_m;
-	// Access L3_PREFIX_ROUTE_IPUC table (2) via register RTL9300_TBL_1
-	// The table has a size of 11 registers (20 for MC)
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 2);
-
-	pr_debug("%s: index %d is valid: %d\n", __func__, idx, rt->attr.valid);
-	pr_debug("%s: nexthop: %d, hit: %d, action :%d, ttl_dec %d, ttl_check %d, dst_null %d\n",
-		__func__, rt->nh.id, rt->attr.hit, rt->attr.action,
-		rt->attr.ttl_dec, rt->attr.ttl_check, rt->attr.dst_null);
-	pr_debug("%s: GW: %pI4, prefix_len: %d\n", __func__, &rt->dst_ip, rt->prefix_len);
-
-	v = rt->attr.valid ? BIT(31) : 0;
-	v |= (rt->attr.type & 0x3) << 29;
-	sw_w32(v, rtl_table_data(r, 0));
-
-	v = rt->attr.hit ? BIT(22) : 0;
-	v |= (rt->attr.action & 0x3) << 18;
-	v |= (rt->nh.id & 0x7ff) << 7;
-	v |= rt->attr.ttl_dec ? BIT(6) : 0;
-	v |= rt->attr.ttl_check ? BIT(5) : 0;
-	v |= rt->attr.dst_null ? BIT(6) : 0;
-	v |= rt->attr.qos_as ? BIT(6) : 0;
-	v |= rt->attr.qos_prio & 0x7;
-	v |= rt->prefix_len == 0 ? BIT(20) : 0; // set default route bit
-
-	// set bit mask for entry type always to 0x3
-	sw_w32(0x3 << 29, rtl_table_data(r, 5));
-
-	switch (rt->attr.type) {
-	case 0: // IPv4 Unicast route
-		sw_w32(0, rtl_table_data(r, 1));
-		sw_w32(0, rtl_table_data(r, 2));
-		sw_w32(0, rtl_table_data(r, 3));
-		sw_w32(rt->dst_ip, rtl_table_data(r, 4));
-
-		v |= rt->prefix_len == 32 ? BIT(21) : 0; // set host-route bit
-		ip4_m = inet_make_mask(rt->prefix_len);
-		sw_w32(0, rtl_table_data(r, 6));
-		sw_w32(0, rtl_table_data(r, 7));
-		sw_w32(0, rtl_table_data(r, 8));
-		sw_w32(ip4_m, rtl_table_data(r, 9));
-		break;
-	case 2: // IPv6 Unicast route
-		sw_w32(rt->dst_ip6.s6_addr32[0], rtl_table_data(r, 1));
-		sw_w32(rt->dst_ip6.s6_addr32[1], rtl_table_data(r, 2));
-		sw_w32(rt->dst_ip6.s6_addr32[2], rtl_table_data(r, 3));
-		sw_w32(rt->dst_ip6.s6_addr32[3], rtl_table_data(r, 4));
-
-		v |= rt->prefix_len == 128 ? BIT(21) : 0; // set host-route bit
-
-		rtl930x_net6_mask(rt->prefix_len, &ip6_m);
-
-		sw_w32(ip6_m.s6_addr32[0], rtl_table_data(r, 6));
-		sw_w32(ip6_m.s6_addr32[1], rtl_table_data(r, 7));
-		sw_w32(ip6_m.s6_addr32[2], rtl_table_data(r, 8));
-		sw_w32(ip6_m.s6_addr32[3], rtl_table_data(r, 9));
-		break;
-	case 1: // IPv4 Multicast route
-	case 3: // IPv6 Multicast route
-		pr_warn("%s: route type not supported\n", __func__);
-		rtl_table_release(r);
-		return;
-	}
-	sw_w32(v, rtl_table_data(r, 10));
-
-	pr_debug("%s: %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x\n", __func__,
-		sw_r32(rtl_table_data(r, 0)), sw_r32(rtl_table_data(r, 1)), sw_r32(rtl_table_data(r, 2)),
-		sw_r32(rtl_table_data(r, 3)), sw_r32(rtl_table_data(r, 4)), sw_r32(rtl_table_data(r, 5)),
-		sw_r32(rtl_table_data(r, 6)), sw_r32(rtl_table_data(r, 7)), sw_r32(rtl_table_data(r, 8)),
-		sw_r32(rtl_table_data(r, 9)), sw_r32(rtl_table_data(r, 10)));
-
-	rtl_table_write(r, idx);
-	rtl_table_release(r);
-}
-
-
-/*
- * Get the destination MAC and L3 egress interface ID of a nexthop entry from
- * the SoC's L3_NEXTHOP table
- */
-static void rtl930x_get_l3_nexthop(int idx, u16 *dmac_id, u16 *interface)
-{
-	u32 v;
-	// Read L3_NEXTHOP table (3) via register RTL9300_TBL_1
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 3);
-
-	rtl_table_read(r, idx);
-	// The table has a size of 1 register
-	v = sw_r32(rtl_table_data(r, 0));
-	rtl_table_release(r);
-
-	*dmac_id = (v >> 7) & 0x7fff;
-	*interface = v & 0x7f;
-}
-
-static int rtl930x_l3_mtu_del(struct rtl838x_switch_priv *priv, int mtu)
-{
-	int i;
-
-	for (i = 0; i < MAX_INTF_MTUS; i++) {
-		if (mtu == priv->intf_mtus[i])
-			break;
-	}
-	if (i >= MAX_INTF_MTUS || !priv->intf_mtu_count[i]) {
-		pr_err("%s: No MTU slot found for MTU: %d\n", __func__, mtu);
-		return -EINVAL;
-	}
-
-	priv->intf_mtu_count[i]--;
-}
-
-static int rtl930x_l3_mtu_add(struct rtl838x_switch_priv *priv, int mtu)
-{
-	int i, free_mtu;
-	int mtu_id;
-
-	// Try to find an existing mtu-value or a free slot
-	free_mtu = MAX_INTF_MTUS;
-	for (i = 0; i < MAX_INTF_MTUS && priv->intf_mtus[i] != mtu; i++) {
-		if ((!priv->intf_mtu_count[i]) && (free_mtu == MAX_INTF_MTUS))
-			free_mtu = i;
-	}
-	i = (i < MAX_INTF_MTUS) ? i : free_mtu;
-	if (i < MAX_INTF_MTUS) {
-		mtu_id = i;
-	} else {
-		pr_err("%s: No free MTU slot available!\n", __func__);
-		return -EINVAL;
-	}
-
-	priv->intf_mtus[i] = mtu;
-	pr_info("Writing MTU %d to slot %d\n", priv->intf_mtus[i], i);
-	// Set MTU-value of the slot TODO: distinguish between IPv4/IPv6 routes / slots
-	sw_w32_mask(0xffff << ((i % 2) * 16), priv->intf_mtus[i] << ((i % 2) * 16),
-		    RTL930X_L3_IP_MTU_CTRL(i));
-	sw_w32_mask(0xffff << ((i % 2) * 16), priv->intf_mtus[i] << ((i % 2) * 16),
-		    RTL930X_L3_IP6_MTU_CTRL(i));
-
-	priv->intf_mtu_count[i]++;
-
-	return mtu_id;
-}
-
-/*
- * Creates an interface for a route by setting up the HW tables in the SoC
- */
-static int rtl930x_l3_intf_add(struct rtl838x_switch_priv *priv, struct rtl838x_l3_intf *intf)
-{
-	int i, intf_id, mtu_id;
-	// number of MTU-values < 16384
-
-	// Use the same IPv6 mtu as the ip4 mtu for this route if unset
-	intf->ip6_mtu = intf->ip6_mtu ? intf->ip6_mtu : intf->ip4_mtu;
-
-	mtu_id = rtl930x_l3_mtu_add(priv, intf->ip4_mtu);
-	pr_info("%s: added mtu %d with mtu-id %d\n", __func__, intf->ip4_mtu, mtu_id);
-	if (mtu_id < 0)
-		return -ENOSPC;
-	intf->ip4_mtu_id = mtu_id;
-	intf->ip6_mtu_id = mtu_id;
-
-	for (i = 0; i < MAX_INTERFACES; i++) {
-		if (!priv->interfaces[i])
-			break;
-	}
-	if (i >= MAX_INTERFACES) {
-		pr_err("%s: cannot find free interface entry\n", __func__);
-		return -EINVAL;
-	}
-	intf_id = i;
-	priv->interfaces[i] = kzalloc(sizeof(struct rtl838x_l3_intf), GFP_KERNEL);
-	if (!priv->interfaces[i]) {
-		pr_err("%s: no memory to allocate new interface\n", __func__);
-		return -ENOMEM;
-	}
-}
-
-/*
- * Set the destination MAC and L3 egress interface ID for a nexthop entry in the SoC's
- * L3_NEXTHOP table. The nexthop entry is identified by idx.
- * dmac_id is the reference to the L2 entry in the L2 forwarding table, special values are
- * 0x7ffe: TRAP2CPU
- * 0x7ffd: TRAP2MASTERCPU
- * 0x7fff: DMAC_ID_DROP
- */
-static void rtl930x_set_l3_nexthop(int idx, u16 dmac_id, u16 interface)
-{
-	// Access L3_NEXTHOP table (3) via register RTL9300_TBL_1
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 3);
-
-	pr_info("%s: Writing to L3_NEXTHOP table, index %d, dmac_id %d, interface %d\n",
-		__func__, idx, dmac_id, interface);
-	sw_w32(((dmac_id & 0x7fff) << 7) | (interface & 0x7f), rtl_table_data(r, 0));
-
-	pr_info("%s: %08x\n", __func__, sw_r32(rtl_table_data(r,0)));
-	rtl_table_write(r, idx);
-	rtl_table_release(r);
-}
-
-static void rtl930x_pie_lookup_enable(struct rtl838x_switch_priv *priv, int index)
-{
-	int block = index / PIE_BLOCK_SIZE;
-
-	sw_w32_mask(0, BIT(block), RTL930X_PIE_BLK_LOOKUP_CTRL);
-}
-
-/*
- * Reads the intermediate representation of the templated match-fields of the
- * PIE rule in the pie_rule structure and fills in the raw data fields in the
- * raw register space r[].
- * The register space configuration size is identical for the RTL8380/90 and RTL9300,
- * however the RTL9310 has 2 more registers / fields and the physical field-ids are different
- * on all SoCs
- * On the RTL9300 the mask fields are not word-aligend!
- */
-static void rtl930x_write_pie_templated(u32 r[], struct pie_rule *pr, enum template_field_id t[])
-{
-	int i;
-	enum template_field_id field_type;
-	u16 data, data_m;
-
-	for (i = 0; i < N_FIXED_FIELDS; i++) {
-		field_type = t[i];
-		data = data_m = 0;
-
-		switch (field_type) {
-		case TEMPLATE_FIELD_SPM0:
-			data = pr->spm;
-			data_m = pr->spm_m;
-			break;
-		case TEMPLATE_FIELD_SPM1:
-			data = pr->spm >> 16;
-			data_m = pr->spm_m >> 16;
-			break;
-		case TEMPLATE_FIELD_OTAG:
-			data = pr->otag;
-			data_m = pr->otag_m;
-			break;
-		case TEMPLATE_FIELD_SMAC0:
-			data = pr->smac[4];
-			data = (data << 8) | pr->smac[5];
-			data_m = pr->smac_m[4];
-			data_m = (data_m << 8) | pr->smac_m[5];
-			break;
-		case TEMPLATE_FIELD_SMAC1:
-			data = pr->smac[2];
-			data = (data << 8) | pr->smac[3];
-			data_m = pr->smac_m[2];
-			data_m = (data_m << 8) | pr->smac_m[3];
-			break;
-		case TEMPLATE_FIELD_SMAC2:
-			data = pr->smac[0];
-			data = (data << 8) | pr->smac[1];
-			data_m = pr->smac_m[0];
-			data_m = (data_m << 8) | pr->smac_m[1];
-			break;
-		case TEMPLATE_FIELD_DMAC0:
-			data = pr->dmac[4];
-			data = (data << 8) | pr->dmac[5];
-			data_m = pr->dmac_m[4];
-			data_m = (data_m << 8) | pr->dmac_m[5];
-			break;
-		case TEMPLATE_FIELD_DMAC1:
-			data = pr->dmac[2];
-			data = (data << 8) | pr->dmac[3];
-			data_m = pr->dmac_m[2];
-			data_m = (data_m << 8) | pr->dmac_m[3];
-			break;
-		case TEMPLATE_FIELD_DMAC2:
-			data = pr->dmac[0];
-			data = (data << 8) | pr->dmac[1];
-			data_m = pr->dmac_m[0];
-			data_m = (data_m << 8) | pr->dmac_m[1];
-			break;
-		case TEMPLATE_FIELD_ETHERTYPE:
-			data = pr->ethertype;
-			data_m = pr->ethertype_m;
-			break;
-		case TEMPLATE_FIELD_ITAG:
-			data = pr->itag;
-			data_m = pr->itag_m;
-			break;
-		case TEMPLATE_FIELD_SIP0:
-			if (pr->is_ipv6) {
-				data = pr->sip6.s6_addr16[7];
-				data_m = pr->sip6_m.s6_addr16[7];
-			} else {
-				data = pr->sip;
-				data_m = pr->sip_m;
-			}
-			break;
-		case TEMPLATE_FIELD_SIP1:
-			if (pr->is_ipv6) {
-				data = pr->sip6.s6_addr16[6];
-				data_m = pr->sip6_m.s6_addr16[6];
-			} else {
-				data = pr->sip >> 16;
-				data_m = pr->sip_m >> 16;
-			}
-			break;
-
-		case TEMPLATE_FIELD_SIP2:
-		case TEMPLATE_FIELD_SIP3:
-		case TEMPLATE_FIELD_SIP4:
-		case TEMPLATE_FIELD_SIP5:
-		case TEMPLATE_FIELD_SIP6:
-		case TEMPLATE_FIELD_SIP7:
-			data = pr->sip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)];
-			data_m = pr->sip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)];
-			break;
-
-		case TEMPLATE_FIELD_DIP0:
-			if (pr->is_ipv6) {
-				data = pr->dip6.s6_addr16[7];
-				data_m = pr->dip6_m.s6_addr16[7];
-			} else {
-				data = pr->dip;
-				data_m = pr->dip_m;
-			}
-			break;
-
-		case TEMPLATE_FIELD_DIP1:
-			if (pr->is_ipv6) {
-				data = pr->dip6.s6_addr16[6];
-				data_m = pr->dip6_m.s6_addr16[6];
-			} else {
-				data = pr->dip >> 16;
-				data_m = pr->dip_m >> 16;
-			}
-			break;
-
-		case TEMPLATE_FIELD_DIP2:
-		case TEMPLATE_FIELD_DIP3:
-		case TEMPLATE_FIELD_DIP4:
-		case TEMPLATE_FIELD_DIP5:
-		case TEMPLATE_FIELD_DIP6:
-		case TEMPLATE_FIELD_DIP7:
-			data = pr->dip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)];
-			data_m = pr->dip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)];
-			break;
-
-		case TEMPLATE_FIELD_IP_TOS_PROTO:
-			data = pr->tos_proto;
-			data_m = pr->tos_proto_m;
-			break;
-		case TEMPLATE_FIELD_L4_SPORT:
-			data = pr->sport;
-			data_m = pr->sport_m;
-			break;
-		case TEMPLATE_FIELD_L4_DPORT:
-			data = pr->dport;
-			data_m = pr->dport_m;
-			break;
-		case TEMPLATE_FIELD_DSAP_SSAP:
-			data = pr->dsap_ssap;
-			data_m = pr->dsap_ssap_m;
-			break;
-		case TEMPLATE_FIELD_TCP_INFO:
-			data = pr->tcp_info;
-			data_m = pr->tcp_info_m;
-			break;
-		case TEMPLATE_FIELD_RANGE_CHK:
-			pr_warn("Warning: TEMPLATE_FIELD_RANGE_CHK: not configured\n");
-			break;
-		default:
-			pr_info("%s: unknown field %d\n", __func__, field_type);
-		}
-
-		// On the RTL9300, the mask fields are not word aligned!
-		if (!(i % 2)) {
-			r[5 - i / 2] = data;
-			r[12 - i / 2] |= ((u32)data_m << 8);
-		} else {
-			r[5 - i / 2] |= ((u32)data) << 16;
-			r[12 - i / 2] |= ((u32)data_m) << 24;
-			r[11 - i / 2] |= ((u32)data_m) >> 8;
-		}
-	}
-}
-
-static void rtl930x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr)
-{
-	pr->stacking_port = r[6] & BIT(31);
-	pr->spn = (r[6] >> 24) & 0x7f;
-	pr->mgnt_vlan = r[6] & BIT(23);
-	if (pr->phase == PHASE_IACL)
-		pr->dmac_hit_sw = r[6] & BIT(22);
-	else
-		pr->content_too_deep = r[6] & BIT(22);
-	pr->not_first_frag = r[6]  & BIT(21);
-	pr->frame_type_l4 = (r[6] >> 18) & 7;
-	pr->frame_type = (r[6] >> 16) & 3;
-	pr->otag_fmt = (r[6] >> 15) & 1;
-	pr->itag_fmt = (r[6] >> 14) & 1;
-	pr->otag_exist = (r[6] >> 13) & 1;
-	pr->itag_exist = (r[6] >> 12) & 1;
-	pr->frame_type_l2 = (r[6] >> 10) & 3;
-	pr->igr_normal_port = (r[6] >> 9) & 1;
-	pr->tid = (r[6] >> 8) & 1;
-
-	pr->stacking_port_m = r[12] & BIT(7);
-	pr->spn_m = r[12]  & 0x7f;
-	pr->mgnt_vlan_m = r[13] & BIT(31);
-	if (pr->phase == PHASE_IACL)
-		pr->dmac_hit_sw_m = r[13] & BIT(30);
-	else
-		pr->content_too_deep_m = r[13] & BIT(30);
-	pr->not_first_frag_m = r[13] & BIT(29);
-	pr->frame_type_l4_m = (r[13] >> 26) & 7;
-	pr->frame_type_m = (r[13] >> 24) & 3;
-	pr->otag_fmt_m = r[13] & BIT(23);
-	pr->itag_fmt_m = r[13] & BIT(22);
-	pr->otag_exist_m = r[13] & BIT(21);
-	pr->itag_exist_m = r[13] & BIT (20);
-	pr->frame_type_l2_m = (r[13] >> 18) & 3;
-	pr->igr_normal_port_m = r[13] & BIT(17);
-	pr->tid_m = (r[13] >> 16) & 1;
-
-	pr->valid = r[13] & BIT(15);
-	pr->cond_not = r[13] & BIT(14);
-	pr->cond_and1 = r[13] & BIT(13);
-	pr->cond_and2 = r[13] & BIT(12);
-}
-
-static void rtl930x_write_pie_fixed_fields(u32 r[],  struct pie_rule *pr)
-{
-	r[6] = pr->stacking_port ? BIT(31) : 0;
-	r[6] |= ((u32) (pr->spn & 0x7f)) << 24;
-	r[6] |= pr->mgnt_vlan ? BIT(23) : 0;
-	if (pr->phase == PHASE_IACL)
-		r[6] |= pr->dmac_hit_sw ? BIT(22) : 0;
-	else
-		r[6] |= pr->content_too_deep ? BIT(22) : 0;
-	r[6] |= pr->not_first_frag ? BIT(21) : 0;
-	r[6] |= ((u32) (pr->frame_type_l4 & 0x7)) << 18;
-	r[6] |= ((u32) (pr->frame_type & 0x3)) << 16;
-	r[6] |= pr->otag_fmt ? BIT(15) : 0;
-	r[6] |= pr->itag_fmt ? BIT(14) : 0;
-	r[6] |= pr->otag_exist ? BIT(13) : 0;
-	r[6] |= pr->itag_exist ? BIT(12) : 0;
-	r[6] |= ((u32) (pr->frame_type_l2 & 0x3)) << 10;
-	r[6] |= pr->igr_normal_port ? BIT(9) : 0;
-	r[6] |= ((u32) (pr->tid & 0x1)) << 8;
-
-	r[12] |= pr->stacking_port_m ? BIT(7) : 0;
-	r[12] |= (u32) (pr->spn_m & 0x7f);
-	r[13] |= pr->mgnt_vlan_m ? BIT(31) : 0;
-	if (pr->phase == PHASE_IACL)
-		r[13] |= pr->dmac_hit_sw_m ? BIT(30) : 0;
-	else
-		r[13] |= pr->content_too_deep_m ? BIT(30) : 0;
-	r[13] |= pr->not_first_frag_m ? BIT(29) : 0;
-	r[13] |= ((u32) (pr->frame_type_l4_m & 0x7)) << 26;
-	r[13] |= ((u32) (pr->frame_type_m & 0x3)) << 24;
-	r[13] |= pr->otag_fmt_m ? BIT(23) : 0;
-	r[13] |= pr->itag_fmt_m ? BIT(22) : 0;
-	r[13] |= pr->otag_exist_m ? BIT(21) : 0;
-	r[13] |= pr->itag_exist_m ? BIT(20) : 0;
-	r[13] |= ((u32) (pr->frame_type_l2_m & 0x3)) << 18;
-	r[13] |= pr->igr_normal_port_m ? BIT(17) : 0;
-	r[13] |= ((u32) (pr->tid_m & 0x1)) << 16;
-
-	r[13] |= pr->valid ? BIT(15) : 0;
-	r[13] |= pr->cond_not ? BIT(14) : 0;
-	r[13] |= pr->cond_and1 ? BIT(13) : 0;
-	r[13] |= pr->cond_and2 ? BIT(12) : 0;
-}
-
-static void rtl930x_write_pie_action(u32 r[],  struct pie_rule *pr)
-{
-	// Either drop or forward
-	if (pr->drop) {
-		r[14] |= BIT(24) | BIT(25) | BIT(26); // Do Green, Yellow and Red drops
-		// Actually DROP, not PERMIT in Green / Yellow / Red
-		r[14] |= BIT(23) | BIT(22) | BIT(20);
-	} else {
-		r[14] |= pr->fwd_sel ? BIT(27) : 0;
-		r[14] |= pr->fwd_act << 18;
-		r[14] |= BIT(14); // We overwrite any drop
-	}
-	if (pr->phase == PHASE_VACL)
-		r[14] |= pr->fwd_sa_lrn ? BIT(15) : 0;
-	r[13] |= pr->bypass_sel ? BIT(5) : 0;
-	r[13] |= pr->nopri_sel ? BIT(4) : 0;
-	r[13] |= pr->tagst_sel ? BIT(3) : 0;
-	r[13] |= pr->ovid_sel ? BIT(1) : 0;
-	r[14] |= pr->ivid_sel ? BIT(31) : 0;
-	r[14] |= pr->meter_sel ? BIT(30) : 0;
-	r[14] |= pr->mir_sel ? BIT(29) : 0;
-	r[14] |= pr->log_sel ? BIT(28) : 0;
-
-	r[14] |= ((u32)(pr->fwd_data & 0x3fff)) << 3;
-	r[15] |= pr->log_octets ? BIT(31) : 0;
-	r[15] |= (u32)(pr->meter_data) << 23;
-
-	r[15] |= ((u32)(pr->ivid_act) << 21) & 0x3;
-	r[15] |= ((u32)(pr->ivid_data) << 9) & 0xfff;
-	r[16] |= ((u32)(pr->ovid_act) << 30) & 0x3;
-	r[16] |= ((u32)(pr->ovid_data) & 0xfff) << 16;
-	r[16] |= (pr->mir_data & 0x3) << 6;
-	r[17] |= ((u32)(pr->tagst_data) & 0xf) << 28;
-	r[17] |= ((u32)(pr->nopri_data) & 0x7) << 25;
-	r[17] |= pr->bypass_ibc_sc ? BIT(16) : 0;
-}
-
-void rtl930x_pie_rule_dump_raw(u32 r[])
-{
-	pr_info("Raw IACL table entry:\n");
-	pr_info("r 0 - 7: %08x %08x %08x %08x %08x %08x %08x %08x\n",
-		r[0], r[1], r[2], r[3], r[4], r[5], r[6], r[7]);
-	pr_info("r 8 - 15: %08x %08x %08x %08x %08x %08x %08x %08x\n",
-		r[8], r[9], r[10], r[11], r[12], r[13], r[14], r[15]);
-	pr_info("r 16 - 18: %08x %08x %08x\n", r[16], r[17], r[18]);
-	pr_info("Match  : %08x %08x %08x %08x %08x %08x\n", r[0], r[1], r[2], r[3], r[4], r[5]);
-	pr_info("Fixed  : %06x\n", r[6] >> 8);
-	pr_info("Match M: %08x %08x %08x %08x %08x %08x\n",
-		(r[6] << 24) | (r[7] >> 8), (r[7] << 24) | (r[8] >> 8), (r[8] << 24) | (r[9] >> 8),
-		(r[9] << 24) | (r[10] >> 8), (r[10] << 24) | (r[11] >> 8),
-		(r[11] << 24) | (r[12] >> 8));
-	pr_info("R[13]:   %08x\n", r[13]);
-	pr_info("Fixed M: %06x\n", ((r[12] << 16) | (r[13] >> 16)) & 0xffffff);
-	pr_info("Valid / not / and1 / and2 : %1x\n", (r[13] >> 12) & 0xf);
-	pr_info("r 13-16: %08x %08x %08x %08x\n", r[13], r[14], r[15], r[16]);
-}
-
-static int rtl930x_pie_rule_write(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr)
-{
-	// Access IACL table (2) via register 0
-	struct table_reg *q = rtl_table_get(RTL9300_TBL_0, 2);
-	u32 r[19];
-	int i;
-	int block = idx / PIE_BLOCK_SIZE;
-	u32 t_select = sw_r32(RTL930X_PIE_BLK_TMPLTE_CTRL(block));
-
-	pr_debug("%s: %d, t_select: %08x\n", __func__, idx, t_select);
-
-	for (i = 0; i < 19; i++)
-		r[i] = 0;
-
-	if (!pr->valid) {
-		rtl_table_write(q, idx);
-		rtl_table_release(q);
-		return 0;
-	}
-	rtl930x_write_pie_fixed_fields(r, pr);
-
-	pr_debug("%s: template %d\n", __func__, (t_select >> (pr->tid * 4)) & 0xf);
-	rtl930x_write_pie_templated(r, pr, fixed_templates[(t_select >> (pr->tid * 4)) & 0xf]);
-
-	rtl930x_write_pie_action(r, pr);
-
-//	rtl930x_pie_rule_dump_raw(r);
-
-	for (i = 0; i < 19; i++)
-		sw_w32(r[i], rtl_table_data(q, i));
-
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-
-	return 0;
-}
-
-static bool rtl930x_pie_templ_has(int t, enum template_field_id field_type)
-{
-	int i;
-	enum template_field_id ft;
-
-	for (i = 0; i < N_FIXED_FIELDS; i++) {
-		ft = fixed_templates[t][i];
-		if (field_type == ft)
-			return true;
-	}
-
-	return false;
-}
-
-/*
- * Verify that the rule pr is compatible with a given template t in block block
- * Note that this function is SoC specific since the values of e.g. TEMPLATE_FIELD_SIP0
- * depend on the SoC
- */
-static int rtl930x_pie_verify_template(struct rtl838x_switch_priv *priv,
-				       struct pie_rule *pr, int t, int block)
-{
-	int i;
-
-	if (!pr->is_ipv6 && pr->sip_m && !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_SIP0))
-		return -1;
-
-	if (!pr->is_ipv6 && pr->dip_m && !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_DIP0))
-		return -1;
-
-	if (pr->is_ipv6) {
-		if ((pr->sip6_m.s6_addr32[0] || pr->sip6_m.s6_addr32[1]
-			|| pr->sip6_m.s6_addr32[2] || pr->sip6_m.s6_addr32[3])
-			&& !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_SIP2))
-			return -1;
-		if ((pr->dip6_m.s6_addr32[0] || pr->dip6_m.s6_addr32[1]
-			|| pr->dip6_m.s6_addr32[2] || pr->dip6_m.s6_addr32[3])
-			&& !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_DIP2))
-			return -1;
-	}
-
-	if (ether_addr_to_u64(pr->smac) && !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_SMAC0))
-		return -1;
-
-	if (ether_addr_to_u64(pr->dmac) && !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_DMAC0))
-		return -1;
-
-	// TODO: Check more
-
-	i = find_first_zero_bit(&priv->pie_use_bm[block * 4], PIE_BLOCK_SIZE);
-
-	if (i >= PIE_BLOCK_SIZE)
-		return -1;
-
-	return i + PIE_BLOCK_SIZE * block;
-}
-
-static int rtl930x_pie_rule_add(struct rtl838x_switch_priv *priv, struct pie_rule *pr)
-{
-	int idx, block, j, t;
-	int min_block = 0;
-	int max_block = priv->n_pie_blocks / 2;
-
-	if (pr->is_egress) {
-		min_block = max_block;
-		max_block = priv->n_pie_blocks;
-	}
-	pr_debug("In %s\n", __func__);
-
-	mutex_lock(&priv->pie_mutex);
-
-	for (block = min_block; block < max_block; block++) {
-		for (j = 0; j < 2; j++) {
-			t = (sw_r32(RTL930X_PIE_BLK_TMPLTE_CTRL(block)) >> (j * 4)) & 0xf;
-			pr_debug("Testing block %d, template %d, template id %d\n", block, j, t);
-			pr_debug("%s: %08x\n",
-				__func__, sw_r32(RTL930X_PIE_BLK_TMPLTE_CTRL(block)));
-			idx = rtl930x_pie_verify_template(priv, pr, t, block);
-			if (idx >= 0)
-				break;
-		}
-		if (j < 2)
-			break;
-	}
-
-	if (block >= priv->n_pie_blocks) {
-		mutex_unlock(&priv->pie_mutex);
-		return -EOPNOTSUPP;
-	}
-
-	pr_debug("Using block: %d, index %d, template-id %d\n", block, idx, j);
-	set_bit(idx, priv->pie_use_bm);
-
-	pr->valid = true;
-	pr->tid = j;  // Mapped to template number
-	pr->tid_m = 0x1;
-	pr->id = idx;
-
-	rtl930x_pie_lookup_enable(priv, idx);
-	rtl930x_pie_rule_write(priv, idx, pr);
-
-	mutex_unlock(&priv->pie_mutex);
-	return 0;
-}
-
-/*
- * Delete a range of Packet Inspection Engine rules
- */
-static int rtl930x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from, int index_to)
-{
-	u32 v = (index_from << 1)| (index_to << 12 ) | BIT(0);
-
-	pr_debug("%s: from %d to %d\n", __func__, index_from, index_to);
-	mutex_lock(&priv->reg_mutex);
-
-	// Write from-to and execute bit into control register
-	sw_w32(v, RTL930X_PIE_CLR_CTRL);
-
-	// Wait until command has completed
-	do {
-	} while (sw_r32(RTL930X_PIE_CLR_CTRL) & BIT(0));
-
-	mutex_unlock(&priv->reg_mutex);
-	return 0;
-}
-
-static void rtl930x_pie_rule_rm(struct rtl838x_switch_priv *priv, struct pie_rule *pr)
-{
-	int idx = pr->id;
-
-	rtl930x_pie_rule_del(priv, idx, idx);
-	clear_bit(idx, priv->pie_use_bm);
-}
-
-static void rtl930x_pie_init(struct rtl838x_switch_priv *priv)
-{
-	int i;
-	u32 template_selectors;
-
-	mutex_init(&priv->pie_mutex);
-
-	pr_info("%s\n", __func__);
-	// Enable ACL lookup on all ports, including CPU_PORT
-	for (i = 0; i <= priv->cpu_port; i++)
-		sw_w32(1, RTL930X_ACL_PORT_LOOKUP_CTRL(i));
-
-	// Include IPG in metering
-	sw_w32_mask(0, 1, RTL930X_METER_GLB_CTRL);
-
-	// Delete all present rules, block size is 128 on all SoC families
-	rtl930x_pie_rule_del(priv, 0, priv->n_pie_blocks * 128 - 1);
-
-	// Assign blocks 0-7 to VACL phase (bit = 0), blocks 8-15 to IACL (bit = 1)
-	sw_w32(0xff00, RTL930X_PIE_BLK_PHASE_CTRL);
-	
-	// Enable predefined templates 0, 1 for first quarter of all blocks
-	template_selectors = 0 | (1 << 4);
-	for (i = 0; i < priv->n_pie_blocks / 4; i++)
-		sw_w32(template_selectors, RTL930X_PIE_BLK_TMPLTE_CTRL(i));
-
-	// Enable predefined templates 2, 3 for second quarter of all blocks
-	template_selectors = 2 | (3 << 4);
-	for (i = priv->n_pie_blocks / 4; i < priv->n_pie_blocks / 2; i++)
-		sw_w32(template_selectors, RTL930X_PIE_BLK_TMPLTE_CTRL(i));
-
-	// Enable predefined templates 0, 1 for third half of all blocks
-	template_selectors = 0 | (1 << 4);
-	for (i = priv->n_pie_blocks / 2; i < priv->n_pie_blocks * 3 / 4; i++)
-		sw_w32(template_selectors, RTL930X_PIE_BLK_TMPLTE_CTRL(i));
-
-	// Enable predefined templates 2, 3 for fourth quater of all blocks
-	template_selectors = 2 | (3 << 4);
-	for (i = priv->n_pie_blocks * 3 / 4; i < priv->n_pie_blocks; i++)
-		sw_w32(template_selectors, RTL930X_PIE_BLK_TMPLTE_CTRL(i));
-
-}
-
-/*
- * Sets up an egress interface for L3 actions
- * Actions for ip4/6_icmp_redirect, ip4/6_pbr_icmp_redirect are:
- * 0: FORWARD, 1: DROP, 2: TRAP2CPU, 3: COPY2CPU, 4: TRAP2MASTERCPU 5: COPY2MASTERCPU
- * 6: HARDDROP
- * idx is the index in the HW interface table: idx < 0x80
- */
-static void rtl930x_set_l3_egress_intf(int idx, struct rtl838x_l3_intf *intf)
-{
-	u32 u, v;
-	// Read L3_EGR_INTF table (4) via register RTL9300_TBL_1
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 4);
-
-	// The table has 2 registers
-	u = (intf->vid & 0xfff) << 9;
-	u |= (intf->smac_idx & 0x3f) << 3;
-	u |= (intf->ip4_mtu_id & 0x7);
-
-	v = (intf->ip6_mtu_id & 0x7) << 28;
-	v |= (intf->ttl_scope & 0xff) << 20;
-	v |= (intf->hl_scope & 0xff) << 12;
-	v |= (intf->ip4_icmp_redirect & 0x7) << 9;
-	v |= (intf->ip6_icmp_redirect & 0x7)<< 6;
-	v |= (intf->ip4_pbr_icmp_redirect & 0x7) << 3;
-	v |= (intf->ip6_pbr_icmp_redirect & 0x7);
-
-	sw_w32(u, rtl_table_data(r, 0));
-	sw_w32(v, rtl_table_data(r, 1));
-
-	pr_info("%s writing to index %d: %08x %08x\n", __func__, idx, u, v);
-	rtl_table_write(r, idx & 0x7f);
-	rtl_table_release(r);
-}
-
-/*
- * Reads a MAC entry for L3 termination as entry point for routing
- * from the hardware table
- * idx is the index into the L3_ROUTER_MAC table
- */
-static void rtl930x_get_l3_router_mac(u32 idx, struct rtl93xx_rt_mac *m)
-{
-	u32 v, w;
-	// Read L3_ROUTER_MAC table (0) via register RTL9300_TBL_1
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 0);
-
-	rtl_table_read(r, idx);
-	// The table has a size of 7 registers, 64 entries
-	v = sw_r32(rtl_table_data(r, 0));
-	w = sw_r32(rtl_table_data(r, 3));
-	m->valid = !!(v & BIT(20));
-	if (!m->valid)
-		goto out;
-
-	m->p_type = !!(v & BIT(19));
-	m->p_id = (v >> 13) & 0x3f;  // trunk id of port
-	m->vid = v & 0xfff;
-	m->vid_mask = w & 0xfff;
-	m->action = sw_r32(rtl_table_data(r, 6)) & 0x7;
-	m->mac_mask = ((((u64)sw_r32(rtl_table_data(r, 5))) << 32) & 0xffffffffffffULL)
-			| (sw_r32(rtl_table_data(r, 4)));
-	m->mac = ((((u64)sw_r32(rtl_table_data(r, 1))) << 32) & 0xffffffffffffULL)
-			| (sw_r32(rtl_table_data(r, 2)));
-	// Bits L3_INTF and BMSK_L3_INTF are 0
-
-out:
-	rtl_table_release(r);
-}
-
-/*
- * Writes a MAC entry for L3 termination as entry point for routing
- * into the hardware table
- * idx is the index into the L3_ROUTER_MAC table
- */
-static void rtl930x_set_l3_router_mac(u32 idx, struct rtl93xx_rt_mac *m)
-{
-	u32 v, w;
-	// Read L3_ROUTER_MAC table (0) via register RTL9300_TBL_1
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 0);
-
-	// The table has a size of 7 registers, 64 entries
-	v = BIT(20); // mac entry valid, port type is 0: individual
-	v |= (m->p_id & 0x3f) << 13;
-	v |= (m->vid & 0xfff); // Set the interface_id to the vlan id
-
-	w = m->vid_mask;
-	w |= (m->p_id_mask & 0x3f) << 13;
-
-	sw_w32(v, rtl_table_data(r, 0));
-	sw_w32(w, rtl_table_data(r, 3));
-
-	// Set MAC address, L3_INTF (bit 12 in register 1) needs to be 0
-	sw_w32((u32)(m->mac), rtl_table_data(r, 2));
-	sw_w32(m->mac >> 32, rtl_table_data(r, 1));
-
-	// Set MAC address mask, BMSK_L3_INTF (bit 12 in register 5) needs to be 0
-	sw_w32((u32)(m->mac_mask >> 32), rtl_table_data(r, 4));
-	sw_w32((u32)m->mac_mask, rtl_table_data(r, 5));
-
-	sw_w32(m->action & 0x7, rtl_table_data(r, 6));
-
-	pr_debug("%s writing index %d: %08x %08x %08x %08x %08x %08x %08x\n", __func__, idx,
-		sw_r32(rtl_table_data(r, 0)), sw_r32(rtl_table_data(r, 1)), sw_r32(rtl_table_data(r, 2)),
-		sw_r32(rtl_table_data(r, 3)), sw_r32(rtl_table_data(r, 4)), sw_r32(rtl_table_data(r, 5)),
-		sw_r32(rtl_table_data(r, 6))
-	);
-	rtl_table_write(r, idx);
-	rtl_table_release(r);
-}
-
-/*
- * Get the Destination-MAC of an L3 egress interface or the Source MAC for routed packets
- * from the SoC's L3_EGR_INTF_MAC table
- * Indexes 0-2047 are DMACs, 2048+ are SMACs
- */
-static u64 rtl930x_get_l3_egress_mac(u32 idx)
-{
-	u64 mac;
-	// Read L3_EGR_INTF_MAC table (2) via register RTL9300_TBL_2
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_2, 2);
-
-	rtl_table_read(r, idx);
-	// The table has a size of 2 registers
-	mac = sw_r32(rtl_table_data(r, 0));
-	mac <<= 32;
-	mac |= sw_r32(rtl_table_data(r, 1));
-	rtl_table_release(r);
-
-	return mac;
-}
-/*
- * Set the Destination-MAC of a route or the Source MAC of an L3 egress interface
- * in the SoC's L3_EGR_INTF_MAC table
- * Indexes 0-2047 are DMACs, 2048+ are SMACs
- */
-static void rtl930x_set_l3_egress_mac(u32 idx, u64 mac)
-{
-	// Access L3_EGR_INTF_MAC table (2) via register RTL9300_TBL_2
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_2, 2);
-
-	// The table has a size of 2 registers
-	sw_w32(mac >> 32, rtl_table_data(r, 0));
-	sw_w32(mac, rtl_table_data(r, 1));
-
-	pr_debug("%s: setting index %d to %016llx\n", __func__, idx, mac);
-	rtl_table_write(r, idx);
-	rtl_table_release(r);
-}
-
-/*
- * Configure L3 routing settings of the device:
- * - MTUs
- * - Egress interface
- * - The router's MAC address on which routed packets are expected
- * - MAC addresses used as source macs of routed packets
- */
-int rtl930x_l3_setup(struct rtl838x_switch_priv *priv)
-{
-	int i;
-
-	// Setup MTU with id 0 for default interface
-	for (i = 0; i < MAX_INTF_MTUS; i++)
-		priv->intf_mtu_count[i] = priv->intf_mtus[i] = 0;
-
-	priv->intf_mtu_count[0] = 0; // Needs to stay forever
-	priv->intf_mtus[0] = DEFAULT_MTU;
-	sw_w32_mask(0xffff, DEFAULT_MTU, RTL930X_L3_IP_MTU_CTRL(0));
-	sw_w32_mask(0xffff, DEFAULT_MTU, RTL930X_L3_IP6_MTU_CTRL(0));
-	priv->intf_mtus[1] = DEFAULT_MTU;
-	sw_w32_mask(0xffff0000, DEFAULT_MTU << 16, RTL930X_L3_IP_MTU_CTRL(0));
-	sw_w32_mask(0xffff0000, DEFAULT_MTU << 16, RTL930X_L3_IP6_MTU_CTRL(0));
-
-	sw_w32_mask(0xffff, DEFAULT_MTU, RTL930X_L3_IP_MTU_CTRL(1));
-	sw_w32_mask(0xffff, DEFAULT_MTU, RTL930X_L3_IP6_MTU_CTRL(1));
-	sw_w32_mask(0xffff0000, DEFAULT_MTU << 16, RTL930X_L3_IP_MTU_CTRL(1));
-	sw_w32_mask(0xffff0000, DEFAULT_MTU << 16, RTL930X_L3_IP6_MTU_CTRL(1));
-
-	// Clear all source port MACs
-	for (i = 0; i < MAX_SMACS; i++)
-		rtl930x_set_l3_egress_mac(L3_EGRESS_DMACS + i, 0ULL);
-
-	// Configure the default L3 hash algorithm
-	sw_w32_mask(BIT(2), 0, RTL930X_L3_HOST_TBL_CTRL);  // Algorithm selection 0 = 0
-	sw_w32_mask(0, BIT(3), RTL930X_L3_HOST_TBL_CTRL);  // Algorithm selection 1 = 1
-
-	pr_info("L3_IPUC_ROUTE_CTRL %08x, IPMC_ROUTE %08x, IP6UC_ROUTE %08x, IP6MC_ROUTE %08x\n",
-		sw_r32(RTL930X_L3_IPUC_ROUTE_CTRL), sw_r32(RTL930X_L3_IPMC_ROUTE_CTRL),
-		sw_r32(RTL930X_L3_IP6UC_ROUTE_CTRL), sw_r32(RTL930X_L3_IP6MC_ROUTE_CTRL));
-	sw_w32_mask(0, 1, RTL930X_L3_IPUC_ROUTE_CTRL);
-	sw_w32_mask(0, 1, RTL930X_L3_IP6UC_ROUTE_CTRL);
-	sw_w32_mask(0, 1, RTL930X_L3_IPMC_ROUTE_CTRL);
-	sw_w32_mask(0, 1, RTL930X_L3_IP6MC_ROUTE_CTRL);
-
-	sw_w32(0x00002001, RTL930X_L3_IPUC_ROUTE_CTRL);
-	sw_w32(0x00014581, RTL930X_L3_IP6UC_ROUTE_CTRL);
-	sw_w32(0x00000501, RTL930X_L3_IPMC_ROUTE_CTRL);
-	sw_w32(0x00012881, RTL930X_L3_IP6MC_ROUTE_CTRL);
-
-	pr_info("L3_IPUC_ROUTE_CTRL %08x, IPMC_ROUTE %08x, IP6UC_ROUTE %08x, IP6MC_ROUTE %08x\n",
-		sw_r32(RTL930X_L3_IPUC_ROUTE_CTRL), sw_r32(RTL930X_L3_IPMC_ROUTE_CTRL),
-		sw_r32(RTL930X_L3_IP6UC_ROUTE_CTRL), sw_r32(RTL930X_L3_IP6MC_ROUTE_CTRL));
-
-	// Trap non-ip traffic to the CPU-port (e.g. ARP so we stay reachable)
-	sw_w32_mask(0x3 << 8, 0x1 << 8, RTL930X_L3_IP_ROUTE_CTRL);
-	pr_info("L3_IP_ROUTE_CTRL %08x\n", sw_r32(RTL930X_L3_IP_ROUTE_CTRL));
-
-	// PORT_ISO_RESTRICT_ROUTE_CTRL ?
-
-	// Do not use prefix route 0 because of HW limitations
-	set_bit(0, priv->route_use_bm);
-
-	return 0;
-}
-
-static u32 rtl930x_packet_cntr_read(int counter)
-{
-	u32 v;
-
-	// Read LOG table (3) via register RTL9300_TBL_0
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 3);
-
-	pr_debug("In %s, id %d\n", __func__, counter);
-	rtl_table_read(r, counter / 2);
-
-	pr_debug("Registers: %08x %08x\n",
-		sw_r32(rtl_table_data(r, 0)), sw_r32(rtl_table_data(r, 1)));
-	// The table has a size of 2 registers
-	if (counter % 2)
-		v = sw_r32(rtl_table_data(r, 0));
-	else
-		v = sw_r32(rtl_table_data(r, 1));
-
-	rtl_table_release(r);
-
-	return v;
-}
-
-static void rtl930x_packet_cntr_clear(int counter)
-{
-	// Access LOG table (3) via register RTL9300_TBL_0
-	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 3);
-
-	pr_info("In %s, id %d\n", __func__, counter);
-	// The table has a size of 2 registers
-	if (counter % 2)
-		sw_w32(0, rtl_table_data(r, 0));
-	else
-		sw_w32(0, rtl_table_data(r, 1));
-
-	rtl_table_write(r, counter / 2);
-
-	rtl_table_release(r);
-}
-
-void rtl930x_vlan_port_keep_tag_set(int port, bool keep_outer, bool keep_inner)
-{
-	sw_w32(FIELD_PREP(RTL930X_VLAN_PORT_TAG_STS_CTRL_EGR_OTAG_STS_MASK,
-			  keep_outer ? RTL930X_VLAN_PORT_TAG_STS_TAGGED : RTL930X_VLAN_PORT_TAG_STS_UNTAG) |
-	       FIELD_PREP(RTL930X_VLAN_PORT_TAG_STS_CTRL_EGR_ITAG_STS_MASK,
-			  keep_inner ? RTL930X_VLAN_PORT_TAG_STS_TAGGED : RTL930X_VLAN_PORT_TAG_STS_UNTAG),
-	       RTL930X_VLAN_PORT_TAG_STS_CTRL(port));
-}
-
-void rtl930x_vlan_port_pvidmode_set(int port, enum pbvlan_type type, enum pbvlan_mode mode)
-{
-	if (type == PBVLAN_TYPE_INNER)
-		sw_w32_mask(0x3, mode, RTL930X_VLAN_PORT_PB_VLAN + (port << 2));
-	else
-		sw_w32_mask(0x3 << 14, mode << 14 ,RTL930X_VLAN_PORT_PB_VLAN + (port << 2));
-}
-
-void rtl930x_vlan_port_pvid_set(int port, enum pbvlan_type type, int pvid)
-{
-	if (type == PBVLAN_TYPE_INNER)
-		sw_w32_mask(0xfff << 2, pvid << 2, RTL930X_VLAN_PORT_PB_VLAN + (port << 2));
-	else
-		sw_w32_mask(0xfff << 16, pvid << 16, RTL930X_VLAN_PORT_PB_VLAN + (port << 2));
-}
-
-static int rtl930x_set_ageing_time(unsigned long msec)
-{
-	int t = sw_r32(RTL930X_L2_AGE_CTRL);
-
-	t &= 0x1FFFFF;
-	t = (t * 7) / 10;
-	pr_debug("L2 AGING time: %d sec\n", t);
-
-	t = (msec / 100 + 6) / 7;
-	t = t > 0x1FFFFF ? 0x1FFFFF : t;
-	sw_w32_mask(0x1FFFFF, t, RTL930X_L2_AGE_CTRL);
-	pr_debug("Dynamic aging for ports: %x\n", sw_r32(RTL930X_L2_PORT_AGE_CTRL));
-
-	return 0;
-}
-
-static void rtl930x_set_igr_filter(int port,  enum igr_filter state)
-{
-	sw_w32_mask(0x3 << ((port & 0xf)<<1), state << ((port & 0xf)<<1),
-		    RTL930X_VLAN_PORT_IGR_FLTR + (((port >> 4) << 2)));
-}
-
-static void rtl930x_set_egr_filter(int port,  enum egr_filter state)
-{
-	sw_w32_mask(0x1 << (port % 0x1D), state << (port % 0x1D),
-		    RTL930X_VLAN_PORT_EGR_FLTR + (((port / 29) << 2)));
-}
-
-void rtl930x_set_distribution_algorithm(int group, int algoidx, u32 algomsk)
-{
-	u32 l3shift = 0;
-	u32 newmask = 0;
-
-	/* TODO: for now we set algoidx to 0 */
-	algoidx = 0;
-	if (algomsk & TRUNK_DISTRIBUTION_ALGO_SIP_BIT) {
-		l3shift = 4;
-		newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SIP_BIT;
-	}
-	if (algomsk & TRUNK_DISTRIBUTION_ALGO_DIP_BIT) {
-		l3shift = 4;
-		newmask |= TRUNK_DISTRIBUTION_ALGO_L3_DIP_BIT;
-	}
-	if (algomsk & TRUNK_DISTRIBUTION_ALGO_SRC_L4PORT_BIT) {
-		l3shift = 4;
-		newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SRC_L4PORT_BIT;
-	}
-	if (algomsk & TRUNK_DISTRIBUTION_ALGO_SRC_L4PORT_BIT) {
-		l3shift = 4;
-		newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SRC_L4PORT_BIT;
-	}
-
-	if (l3shift == 4) {
-		if (algomsk & TRUNK_DISTRIBUTION_ALGO_SMAC_BIT)
-			newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SMAC_BIT;
-
-		if (algomsk & TRUNK_DISTRIBUTION_ALGO_DMAC_BIT)
-			newmask |= TRUNK_DISTRIBUTION_ALGO_L3_DMAC_BIT;
-	} else  {
-		if (algomsk & TRUNK_DISTRIBUTION_ALGO_SMAC_BIT)
-			newmask |= TRUNK_DISTRIBUTION_ALGO_L2_SMAC_BIT;
-		if (algomsk & TRUNK_DISTRIBUTION_ALGO_DMAC_BIT)
-			newmask |= TRUNK_DISTRIBUTION_ALGO_L2_DMAC_BIT;
-	}
-
-	sw_w32(newmask << l3shift, RTL930X_TRK_HASH_CTRL + (algoidx << 2));
-}
-
-static void rtl930x_led_init(struct rtl838x_switch_priv *priv)
-{
-	int i, pos;
-	u32 v, pm = 0, set;
-	u32 setlen;
-	const __be32 *led_set;
-	char set_name[9];
-	struct device_node *node;
-
-	pr_info("%s called\n", __func__);
-	node = of_find_compatible_node(NULL, NULL, "realtek,rtl9300-leds");
-	if (!node) {
-		pr_info("%s No compatible LED node found\n", __func__);
-		return;
-	}
-
-	for (i= 0; i < priv->cpu_port; i++) {
-		pos = (i << 1) % 32;
-		sw_w32_mask(0x3 << pos, 0, RTL930X_LED_PORT_FIB_SET_SEL_CTRL(i));
-		sw_w32_mask(0x3 << pos, 0, RTL930X_LED_PORT_COPR_SET_SEL_CTRL(i));
-
-		if (!priv->ports[i].phy)
-			continue;
-
-		v = 0x1;
-		if (priv->ports[i].is10G)
-			v = 0x3;
-		if (priv->ports[i].phy_is_integrated)
-			v = 0x1;
-		sw_w32_mask(0x3 << pos, v << pos, RTL930X_LED_PORT_NUM_CTRL(i));
-
-		pm |= BIT(i);
-
-		set = priv->ports[i].led_set;
-		sw_w32_mask(0, set << pos, RTL930X_LED_PORT_COPR_SET_SEL_CTRL(i));
-		sw_w32_mask(0, set << pos, RTL930X_LED_PORT_FIB_SET_SEL_CTRL(i));
-	}
-
-	for (i = 0; i < 4; i++) {
-		sprintf(set_name, "led_set%d", i);
-		led_set = of_get_property(node, set_name, &setlen);
-		if (!led_set || setlen != 16)
-			break;
-		v = be32_to_cpup(led_set) << 16 | be32_to_cpup(led_set + 1);
-		sw_w32(v, RTL930X_LED_SET0_0_CTRL - 4 - i * 8);
-		v = be32_to_cpup(led_set + 2) << 16 | be32_to_cpup(led_set + 3);
-		sw_w32(v, RTL930X_LED_SET0_0_CTRL - i * 8);
-	}
-
-	// Set LED mode to serial (0x1)
-	sw_w32_mask(0x3, 0x1, RTL930X_LED_GLB_CTRL);
-
-	// Set port type masks
-	sw_w32(pm, RTL930X_LED_PORT_COPR_MASK_CTRL);
-	sw_w32(pm, RTL930X_LED_PORT_FIB_MASK_CTRL);
-	sw_w32(pm, RTL930X_LED_PORT_COMBO_MASK_CTRL);
-
-	for (i = 0; i < 24; i++)
-		pr_info("%s %08x: %08x\n",__func__, 0xbb00cc00 + i * 4, sw_r32(0xcc00 + i * 4));
-}
-
-const struct rtl838x_reg rtl930x_reg = {
-	.mask_port_reg_be = rtl838x_mask_port_reg,
-	.set_port_reg_be = rtl838x_set_port_reg,
-	.get_port_reg_be = rtl838x_get_port_reg,
-	.mask_port_reg_le = rtl838x_mask_port_reg,
-	.set_port_reg_le = rtl838x_set_port_reg,
-	.get_port_reg_le = rtl838x_get_port_reg,
-	.stat_port_rst = RTL930X_STAT_PORT_RST,
-	.stat_rst = RTL930X_STAT_RST,
-	.stat_port_std_mib = RTL930X_STAT_PORT_MIB_CNTR,
-	.traffic_enable = rtl930x_traffic_enable,
-	.traffic_disable = rtl930x_traffic_disable,
-	.traffic_get = rtl930x_traffic_get,
-	.traffic_set = rtl930x_traffic_set,
-	.l2_ctrl_0 = RTL930X_L2_CTRL,
-	.l2_ctrl_1 = RTL930X_L2_AGE_CTRL,
-	.l2_port_aging_out = RTL930X_L2_PORT_AGE_CTRL,
-	.set_ageing_time = rtl930x_set_ageing_time,
-	.smi_poll_ctrl = RTL930X_SMI_POLL_CTRL, // TODO: Difference to RTL9300_SMI_PRVTE_POLLING_CTRL
-	.l2_tbl_flush_ctrl = RTL930X_L2_TBL_FLUSH_CTRL,
-	.exec_tbl0_cmd = rtl930x_exec_tbl0_cmd,
-	.exec_tbl1_cmd = rtl930x_exec_tbl1_cmd,
-	.tbl_access_data_0 = rtl930x_tbl_access_data_0,
-	.isr_glb_src = RTL930X_ISR_GLB,
-	.isr_port_link_sts_chg = RTL930X_ISR_PORT_LINK_STS_CHG,
-	.imr_port_link_sts_chg = RTL930X_IMR_PORT_LINK_STS_CHG,
-	.imr_glb = RTL930X_IMR_GLB,
-	.vlan_tables_read = rtl930x_vlan_tables_read,
-	.vlan_set_tagged = rtl930x_vlan_set_tagged,
-	.vlan_set_untagged = rtl930x_vlan_set_untagged,
-	.vlan_profile_dump = rtl930x_vlan_profile_dump,
-	.vlan_profile_setup = rtl930x_vlan_profile_setup,
-	.vlan_fwd_on_inner = rtl930x_vlan_fwd_on_inner,
-	.set_vlan_igr_filter = rtl930x_set_igr_filter,
-	.set_vlan_egr_filter = rtl930x_set_egr_filter,
-	.stp_get = rtl930x_stp_get,
-	.stp_set = rtl930x_stp_set,
-	.mac_force_mode_ctrl = rtl930x_mac_force_mode_ctrl,
-	.mac_port_ctrl = rtl930x_mac_port_ctrl,
-	.l2_port_new_salrn = rtl930x_l2_port_new_salrn,
-	.l2_port_new_sa_fwd = rtl930x_l2_port_new_sa_fwd,
-	.mir_ctrl = RTL930X_MIR_CTRL,
-	.mir_dpm = RTL930X_MIR_DPM_CTRL,
-	.mir_spm = RTL930X_MIR_SPM_CTRL,
-	.mac_link_sts = RTL930X_MAC_LINK_STS,
-	.mac_link_dup_sts = RTL930X_MAC_LINK_DUP_STS,
-	.mac_link_spd_sts = rtl930x_mac_link_spd_sts,
-	.mac_rx_pause_sts = RTL930X_MAC_RX_PAUSE_STS,
-	.mac_tx_pause_sts = RTL930X_MAC_TX_PAUSE_STS,
-	.read_l2_entry_using_hash = rtl930x_read_l2_entry_using_hash,
-	.write_l2_entry_using_hash = rtl930x_write_l2_entry_using_hash,
-	.read_cam = rtl930x_read_cam,
-	.write_cam = rtl930x_write_cam,
-	.vlan_port_keep_tag_set = rtl930x_vlan_port_keep_tag_set,
-	.vlan_port_pvidmode_set = rtl930x_vlan_port_pvidmode_set,
-	.vlan_port_pvid_set = rtl930x_vlan_port_pvid_set,
-	.trk_mbr_ctr = rtl930x_trk_mbr_ctr,
-	.rma_bpdu_fld_pmask = RTL930X_RMA_BPDU_FLD_PMSK,
-	.init_eee = rtl930x_init_eee,
-	.port_eee_set = rtl930x_port_eee_set,
-	.eee_port_ability = rtl930x_eee_port_ability,
-	.l2_hash_seed = rtl930x_l2_hash_seed,
-	.l2_hash_key = rtl930x_l2_hash_key,
-	.read_mcast_pmask = rtl930x_read_mcast_pmask,
-	.write_mcast_pmask = rtl930x_write_mcast_pmask,
-	.pie_init = rtl930x_pie_init,
-	.pie_rule_write = rtl930x_pie_rule_write,
-	.pie_rule_add = rtl930x_pie_rule_add,
-	.pie_rule_rm = rtl930x_pie_rule_rm,
-	.l2_learning_setup = rtl930x_l2_learning_setup,
-	.packet_cntr_read = rtl930x_packet_cntr_read,
-	.packet_cntr_clear = rtl930x_packet_cntr_clear,
-	.route_read = rtl930x_route_read,
-	.route_write = rtl930x_route_write,
-	.host_route_write = rtl930x_host_route_write,
-	.l3_setup = rtl930x_l3_setup,
-	.set_l3_nexthop = rtl930x_set_l3_nexthop,
-	.get_l3_nexthop = rtl930x_get_l3_nexthop,
-	.get_l3_egress_mac = rtl930x_get_l3_egress_mac,
-	.set_l3_egress_mac = rtl930x_set_l3_egress_mac,
-	.find_l3_slot = rtl930x_find_l3_slot,
-	.route_lookup_hw = rtl930x_route_lookup_hw,
-	.get_l3_router_mac = rtl930x_get_l3_router_mac,
-	.set_l3_router_mac = rtl930x_set_l3_router_mac,
-	.set_l3_egress_intf = rtl930x_set_l3_egress_intf,
-	.set_distribution_algorithm = rtl930x_set_distribution_algorithm,
-	.led_init = rtl930x_led_init,
-};
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl931x.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl931x.c
deleted file mode 100644
index ee8d6c2c7379..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl931x.c
+++ /dev/null
@@ -1,1701 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-#include "rtl83xx.h"
-
-#define RTL931X_VLAN_PORT_TAG_STS_INTERNAL			0x0
-#define RTL931X_VLAN_PORT_TAG_STS_UNTAG				0x1
-#define RTL931X_VLAN_PORT_TAG_STS_TAGGED			0x2
-#define RTL931X_VLAN_PORT_TAG_STS_PRIORITY_TAGGED		0x3
-
-#define RTL931X_VLAN_PORT_TAG_CTRL_BASE				0x4860
-/* port 0-56 */
-#define RTL931X_VLAN_PORT_TAG_CTRL(port) \
-		RTL931X_VLAN_PORT_TAG_CTRL_BASE + (port << 2)
-#define RTL931X_VLAN_PORT_TAG_EGR_OTAG_STS_MASK			GENMASK(13,12)
-#define RTL931X_VLAN_PORT_TAG_EGR_ITAG_STS_MASK			GENMASK(11,10)
-#define RTL931X_VLAN_PORT_TAG_EGR_OTAG_KEEP_MASK		GENMASK(9,9)
-#define RTL931X_VLAN_PORT_TAG_EGR_ITAG_KEEP_MASK		GENMASK(8,8)
-#define RTL931X_VLAN_PORT_TAG_IGR_OTAG_KEEP_MASK		GENMASK(7,7)
-#define RTL931X_VLAN_PORT_TAG_IGR_ITAG_KEEP_MASK		GENMASK(6,6)
-#define RTL931X_VLAN_PORT_TAG_OTPID_IDX_MASK			GENMASK(5,4)
-#define RTL931X_VLAN_PORT_TAG_OTPID_KEEP_MASK			GENMASK(3,3)
-#define RTL931X_VLAN_PORT_TAG_ITPID_IDX_MASK			GENMASK(2,1)
-#define RTL931X_VLAN_PORT_TAG_ITPID_KEEP_MASK			GENMASK(0,0)
-
-extern struct mutex smi_lock;
-extern struct rtl83xx_soc_info soc_info;
-
-/* Definition of the RTL931X-specific template field IDs as used in the PIE */
-enum template_field_id {
-	TEMPLATE_FIELD_SPM0 = 1,
-	TEMPLATE_FIELD_SPM1 = 2,
-	TEMPLATE_FIELD_SPM2 = 3,
-	TEMPLATE_FIELD_SPM3 = 4,
-	TEMPLATE_FIELD_DMAC0 = 9,
-	TEMPLATE_FIELD_DMAC1 = 10,
-	TEMPLATE_FIELD_DMAC2 = 11,
-	TEMPLATE_FIELD_SMAC0 = 12,
-	TEMPLATE_FIELD_SMAC1 = 13,
-	TEMPLATE_FIELD_SMAC2 = 14,
-	TEMPLATE_FIELD_ETHERTYPE = 15,
-	TEMPLATE_FIELD_OTAG = 16,
-	TEMPLATE_FIELD_ITAG = 17,
-	TEMPLATE_FIELD_SIP0 = 18,
-	TEMPLATE_FIELD_SIP1 = 19,
-	TEMPLATE_FIELD_DIP0 = 20,
-	TEMPLATE_FIELD_DIP1 = 21,
-	TEMPLATE_FIELD_IP_TOS_PROTO = 22,
-	TEMPLATE_FIELD_L4_SPORT = 23,
-	TEMPLATE_FIELD_L4_DPORT = 24,
-	TEMPLATE_FIELD_L34_HEADER = 25,
-	TEMPLATE_FIELD_TCP_INFO = 26,
-	TEMPLATE_FIELD_SIP2 = 34,
-	TEMPLATE_FIELD_SIP3 = 35,
-	TEMPLATE_FIELD_SIP4 = 36,
-	TEMPLATE_FIELD_SIP5 = 37,
-	TEMPLATE_FIELD_SIP6 = 38,
-	TEMPLATE_FIELD_SIP7 = 39,
-	TEMPLATE_FIELD_DIP2 = 42,
-	TEMPLATE_FIELD_DIP3 = 43,
-	TEMPLATE_FIELD_DIP4 = 44,
-	TEMPLATE_FIELD_DIP5 = 45,
-	TEMPLATE_FIELD_DIP6 = 46,
-	TEMPLATE_FIELD_DIP7 = 47,
-	TEMPLATE_FIELD_FLOW_LABEL = 49,
-	TEMPLATE_FIELD_DSAP_SSAP = 50,
-	TEMPLATE_FIELD_FWD_VID = 52,
-	TEMPLATE_FIELD_RANGE_CHK = 53,
-	TEMPLATE_FIELD_SLP = 55,
-	TEMPLATE_FIELD_DLP = 56,
-	TEMPLATE_FIELD_META_DATA = 57,
-	TEMPLATE_FIELD_FIRST_MPLS1 = 60,
-	TEMPLATE_FIELD_FIRST_MPLS2 = 61,
-	TEMPLATE_FIELD_DPM3 = 8,
-};
-
-/* The meaning of TEMPLATE_FIELD_VLAN depends on phase and the configuration in
- * RTL931X_PIE_CTRL. We use always the same definition and map to the inner VLAN tag:
- */
-#define TEMPLATE_FIELD_VLAN TEMPLATE_FIELD_ITAG
-
-// Number of fixed templates predefined in the RTL9300 SoC
-#define N_FIXED_TEMPLATES 5
-// RTL931x specific predefined templates
-static enum template_field_id fixed_templates[N_FIXED_TEMPLATES][N_FIXED_FIELDS_RTL931X] =
-{
-	{
-		TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2,
-		TEMPLATE_FIELD_SMAC0, TEMPLATE_FIELD_SMAC1, TEMPLATE_FIELD_SMAC2,
-		TEMPLATE_FIELD_VLAN, TEMPLATE_FIELD_IP_TOS_PROTO, TEMPLATE_FIELD_DSAP_SSAP,
-		TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1,
-		TEMPLATE_FIELD_SPM2, TEMPLATE_FIELD_SPM3
-	}, {
-		TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0,
-		TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_IP_TOS_PROTO, TEMPLATE_FIELD_TCP_INFO,
-		TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_L4_DPORT, TEMPLATE_FIELD_VLAN,
-		TEMPLATE_FIELD_RANGE_CHK, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1,
-		TEMPLATE_FIELD_SPM2, TEMPLATE_FIELD_SPM3
-	}, {
-		TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2,
-		TEMPLATE_FIELD_VLAN, TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_IP_TOS_PROTO,
-		TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0,
-		TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_L4_DPORT,
-		TEMPLATE_FIELD_META_DATA, TEMPLATE_FIELD_SLP
-	}, {
-		TEMPLATE_FIELD_DIP0, TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_DIP2,
-		TEMPLATE_FIELD_DIP3, TEMPLATE_FIELD_DIP4, TEMPLATE_FIELD_DIP5,
-		TEMPLATE_FIELD_DIP6, TEMPLATE_FIELD_DIP7, TEMPLATE_FIELD_IP_TOS_PROTO,
-		TEMPLATE_FIELD_TCP_INFO, TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_L4_DPORT,
-		TEMPLATE_FIELD_RANGE_CHK, TEMPLATE_FIELD_SLP
-	}, {
-		TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_SIP2,
-		TEMPLATE_FIELD_SIP3, TEMPLATE_FIELD_SIP4, TEMPLATE_FIELD_SIP5,
-		TEMPLATE_FIELD_SIP6, TEMPLATE_FIELD_SIP7, TEMPLATE_FIELD_META_DATA,
-		TEMPLATE_FIELD_VLAN, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1,
-		TEMPLATE_FIELD_SPM2, TEMPLATE_FIELD_SPM3
-	},
-};
-
-inline void rtl931x_exec_tbl0_cmd(u32 cmd)
-{
-	sw_w32(cmd, RTL931X_TBL_ACCESS_CTRL_0);
-	do { } while (sw_r32(RTL931X_TBL_ACCESS_CTRL_0) & (1 << 20));
-}
-
-inline void rtl931x_exec_tbl1_cmd(u32 cmd)
-{
-	sw_w32(cmd, RTL931X_TBL_ACCESS_CTRL_1);
-	do { } while (sw_r32(RTL931X_TBL_ACCESS_CTRL_1) & (1 << 17));
-}
-
-inline int rtl931x_tbl_access_data_0(int i)
-{
-	return RTL931X_TBL_ACCESS_DATA_0(i);
-}
-
-void rtl931x_vlan_profile_dump(int index)
-{
-	u64 profile[4];
-
-	if (index < 0 || index > 15)
-		return;
-
-	profile[0] = sw_r32(RTL931X_VLAN_PROFILE_SET(index));
-	profile[1] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 4) & 0x1FFFFFFFULL) << 32
-		| (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 8) & 0xFFFFFFFF);
-	profile[2] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 16) & 0x1FFFFFFFULL) << 32
-		| (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 12) & 0xFFFFFFFF);
-	profile[3] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 20) & 0x1FFFFFFFULL) << 32
-		| (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 24) & 0xFFFFFFFF);
-
-	pr_info("VLAN %d: L2 learning: %d, L2 Unknown MultiCast Field %llx, \
-		IPv4 Unknown MultiCast Field %llx, IPv6 Unknown MultiCast Field: %llx",
-		index, (u32) (profile[0] & (3 << 14)), profile[1], profile[2], profile[3]);
-}
-
-static void rtl931x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
-{
-	int i;
-	u32 cmd = 1 << 20 /* Execute cmd */
-		| 0 << 19 /* Read */
-		| 5 << 15 /* Table type 0b101 */
-		| (msti & 0x3fff);
-	priv->r->exec_tbl0_cmd(cmd);
-
-	for (i = 0; i < 4; i++)
-		port_state[i] = sw_r32(priv->r->tbl_access_data_0(i));
-}
-
-static void rtl931x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
-{
-	int i;
-	u32 cmd = 1 << 20 /* Execute cmd */
-		| 1 << 19 /* Write */
-		| 5 << 15 /* Table type 0b101 */
-		| (msti & 0x3fff);
-	for (i = 0; i < 4; i++)
-		sw_w32(port_state[i], priv->r->tbl_access_data_0(i));
-	priv->r->exec_tbl0_cmd(cmd);
-}
-
-inline static int rtl931x_trk_mbr_ctr(int group)
-{
-	return RTL931X_TRK_MBR_CTRL + (group << 2);
-}
-
-static void rtl931x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info)
-{
-	u32 v, w, x, y;
-	// Read VLAN table (3) via register 0
-	struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 3);
-
-	rtl_table_read(r, vlan);
-	v = sw_r32(rtl_table_data(r, 0));
-	w = sw_r32(rtl_table_data(r, 1));
-	x = sw_r32(rtl_table_data(r, 2));
-	y = sw_r32(rtl_table_data(r, 3));
-	rtl_table_release(r);
-
-	pr_debug("VLAN_READ %d: %08x %08x %08x %08x\n", vlan, v, w, x, y);
-	info->tagged_ports = ((u64) v) << 25 | (w >> 7);
-	info->profile_id = (x >> 16) & 0xf;
-	info->fid = w & 0x7f;				// AKA MSTI depending on context
-	info->hash_uc_fid = !!(x & BIT(31));
-	info->hash_mc_fid = !!(x & BIT(30));
-	info->if_id = (x >> 20) & 0x3ff;
-	info->profile_id = (x >> 16) & 0xf;
-	info->multicast_grp_mask = x & 0xffff;
-	if (x & BIT(31))
-		info->l2_tunnel_list_id = y >> 18;
-	else
-		info->l2_tunnel_list_id = -1;
-	pr_debug("%s read tagged %016llx, profile-id %d, uc %d, mc %d, intf-id %d\n", __func__,
-		info->tagged_ports, info->profile_id, info->hash_uc_fid, info->hash_mc_fid,
-		info->if_id);
-
-	// Read UNTAG table via table register 3
-	r = rtl_table_get(RTL9310_TBL_3, 0);
-	rtl_table_read(r, vlan);
-	v = ((u64)sw_r32(rtl_table_data(r, 0))) << 25;
-	v |= sw_r32(rtl_table_data(r, 1)) >> 7;
-	rtl_table_release(r);
-
-	info->untagged_ports = v;
-}
-
-static void rtl931x_vlan_set_tagged(u32 vlan, struct rtl838x_vlan_info *info)
-{
-	u32 v, w, x, y;
-	// Access VLAN table (1) via register 0
-	struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 3);
-
-	v = info->tagged_ports >> 25;
-	w = (info->tagged_ports & 0x1fffff) << 7;
-	w |= info->fid & 0x7f;
-	x = info->hash_uc_fid ? BIT(31) : 0;
-	x |= info->hash_mc_fid ? BIT(30) : 0;
-	x |= info->if_id & 0x3ff << 20;
-	x |= (info->profile_id & 0xf) << 16;
-	x |= info->multicast_grp_mask & 0xffff;
-	if (info->l2_tunnel_list_id >= 0) {
-		y = info->l2_tunnel_list_id << 18;
-		y |= BIT(31);
-	} else {
-		y = 0;
-	}
-
-	sw_w32(v, rtl_table_data(r, 0));
-	sw_w32(w, rtl_table_data(r, 1));
-	sw_w32(x, rtl_table_data(r, 2));
-	sw_w32(y, rtl_table_data(r, 3));
-
-	rtl_table_write(r, vlan);
-	rtl_table_release(r);
-}
-
-static void rtl931x_vlan_set_untagged(u32 vlan, u64 portmask)
-{
-	struct table_reg *r = rtl_table_get(RTL9310_TBL_3, 0);
-
-	rtl839x_set_port_reg_be(portmask << 7, rtl_table_data(r, 0));
-	rtl_table_write(r, vlan);
-	rtl_table_release(r);
-}
-
-static inline int rtl931x_mac_force_mode_ctrl(int p)
-{
-	return RTL931X_MAC_FORCE_MODE_CTRL + (p << 2);
-}
-
-static inline int rtl931x_mac_link_spd_sts(int p)
-{
-	return RTL931X_MAC_LINK_SPD_STS + (((p >> 3) << 2));
-}
-
-static inline int rtl931x_mac_port_ctrl(int p)
-{
-	return RTL931X_MAC_L2_PORT_CTRL + (p << 7);
-}
-
-static inline int rtl931x_l2_port_new_salrn(int p)
-{
-	return RTL931X_L2_PORT_NEW_SALRN(p);
-}
-
-static inline int rtl931x_l2_port_new_sa_fwd(int p)
-{
-	return RTL931X_L2_PORT_NEW_SA_FWD(p);
-}
-
-irqreturn_t rtl931x_switch_irq(int irq, void *dev_id)
-{
-	struct dsa_switch *ds = dev_id;
-	u32 status = sw_r32(RTL931X_ISR_GLB_SRC);
-	u64 ports = rtl839x_get_port_reg_le(RTL931X_ISR_PORT_LINK_STS_CHG);
-	u64 link;
-	int i;
-
-	/* Clear status */
-	rtl839x_set_port_reg_le(ports, RTL931X_ISR_PORT_LINK_STS_CHG);
-	pr_debug("RTL931X Link change: status: %x, ports %016llx\n", status, ports);
-
-	link = rtl839x_get_port_reg_le(RTL931X_MAC_LINK_STS);
-	// Must re-read this to get correct status
-	link = rtl839x_get_port_reg_le(RTL931X_MAC_LINK_STS);
-	pr_debug("RTL931X Link change: status: %x, link status %016llx\n", status, link);
-
-	for (i = 0; i < 56; i++) {
-		if (ports & BIT_ULL(i)) {
-			if (link & BIT_ULL(i)) {
-				pr_info("%s port %d up\n", __func__, i);
-				dsa_port_phylink_mac_change(ds, i, true);
-			} else {
-				pr_info("%s port %d down\n", __func__, i);
-				dsa_port_phylink_mac_change(ds, i, false);
-			}
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-int rtl931x_write_phy(u32 port, u32 page, u32 reg, u32 val)
-{
-	u32 v;
-	int err = 0;
-
-	val &= 0xffff;
-	if (port > 63 || page > 4095 || reg > 31)
-		return -ENOTSUPP;
-
-	mutex_lock(&smi_lock);
-	pr_debug("%s: writing to phy %d %d %d %d\n", __func__, port, page, reg, val);
-	/* Clear both port registers */
-	sw_w32(0, RTL931X_SMI_INDRT_ACCESS_CTRL_2);
-	sw_w32(0, RTL931X_SMI_INDRT_ACCESS_CTRL_2 + 4);
-	sw_w32_mask(0, BIT(port % 32), RTL931X_SMI_INDRT_ACCESS_CTRL_2 + (port / 32) * 4);
-
-	sw_w32_mask(0xffff, val, RTL931X_SMI_INDRT_ACCESS_CTRL_3);
-
-	v = reg << 6 | page << 11 ;
-	sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0);
-
-	sw_w32(0x1ff, RTL931X_SMI_INDRT_ACCESS_CTRL_1);
-
-	v |= BIT(4) | 1; /* Write operation and execute */
-	sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0);
-
-	do {
-	} while (sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0) & 0x1);
-
-	if (sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0) & 0x2)
-		err = -EIO;
-
-	mutex_unlock(&smi_lock);
-	return err;
-}
-
-int rtl931x_read_phy(u32 port, u32 page, u32 reg, u32 *val)
-{
-	u32 v;
-
-	if (port > 63 || page > 4095 || reg > 31)
-		return -ENOTSUPP;
-
-	mutex_lock(&smi_lock);
-
-	sw_w32(port << 5, RTL931X_SMI_INDRT_ACCESS_BC_PHYID_CTRL);
-
-	v = reg << 6 | page << 11 | 1;
-	sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0);
-
-	do {
-	} while (sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0) & 0x1);
-
-	v = sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0);
-	*val = sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_3);
-	*val = (*val & 0xffff0000) >> 16;
-
-	pr_debug("%s: port %d, page: %d, reg: %x, val: %x, v: %08x\n",
-		__func__, port, page, reg, *val, v);
-
-	mutex_unlock(&smi_lock);
-	return 0;
-}
-
-/*
- * Read an mmd register of the PHY
- */
-int rtl931x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val)
-{
-	int err = 0;
-	u32 v;
-	/* Select PHY register type
-	 * If select 1G/10G MMD register type, registers EXT_PAGE, MAIN_PAGE and REG settings are don’t care.
-	 * 0x0  Normal register (Clause 22)
-	 * 0x1: 1G MMD register (MMD via Clause 22 registers 13 and 14)
-	 * 0x2: 10G MMD register (MMD via Clause 45)
-	 */
-	int type = (regnum & MII_ADDR_C45)?2:1;
-
-	mutex_lock(&smi_lock);
-
-	// Set PHY to access via port-number
-	sw_w32(port << 5, RTL931X_SMI_INDRT_ACCESS_BC_PHYID_CTRL);
-
-	// Set MMD device number and register to write to
-	sw_w32(devnum << 16 | mdiobus_c45_regad(regnum), RTL931X_SMI_INDRT_ACCESS_MMD_CTRL);
-
-	v = type << 2 | BIT(0); // MMD-access-type | EXEC
-	sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0);
-
-	do {
-		v = sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0);
-	} while (v & BIT(0));
-
-	// Check for error condition
-	if (v & BIT(1))
-		err = -EIO;
-
-	*val = sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_3) >> 16;
-
-	pr_debug("%s: port %d, dev: %x, regnum: %x, val: %x (err %d)\n", __func__,
-		 port, devnum, mdiobus_c45_regad(regnum), *val, err);
-
-	mutex_unlock(&smi_lock);
-
-	return err;
-}
-
-/*
- * Write to an mmd register of the PHY
- */
-int rtl931x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val)
-{
-	int err = 0;
-	u32 v;
-	int type = (regnum & MII_ADDR_C45)?2:1;
-	u64 pm;
-
-	mutex_lock(&smi_lock);
-
-	// Set PHY to access via port-mask
-	pm = (u64)1 << port;
-	sw_w32((u32)pm, RTL931X_SMI_INDRT_ACCESS_CTRL_2);
-	sw_w32((u32)(pm >> 32), RTL931X_SMI_INDRT_ACCESS_CTRL_2 + 4);
-
-	// Set data to write
-	sw_w32_mask(0xffff, val, RTL931X_SMI_INDRT_ACCESS_CTRL_3);
-
-	// Set MMD device number and register to write to
-	sw_w32(devnum << 16 | mdiobus_c45_regad(regnum), RTL931X_SMI_INDRT_ACCESS_MMD_CTRL);
-
-	v = BIT(4) | type << 2 | BIT(0); // WRITE | MMD-access-type | EXEC
-	sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0);
-
-	do {
-		v = sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0);
-	} while (v & BIT(0));
-
-	pr_debug("%s: port %d, dev: %x, regnum: %x, val: %x (err %d)\n", __func__,
-		 port, devnum, mdiobus_c45_regad(regnum), val, err);
-	mutex_unlock(&smi_lock);
-	return err;
-}
-
-void rtl931x_print_matrix(void)
-{
-	volatile u64 *ptr = RTL838X_SW_BASE + RTL839X_PORT_ISO_CTRL(0);
-	int i;
-
-	for (i = 0; i < 52; i += 4)
-		pr_info("> %16llx %16llx %16llx %16llx\n",
-			ptr[i + 0], ptr[i + 1], ptr[i + 2], ptr[i + 3]);
-	pr_info("CPU_PORT> %16llx\n", ptr[52]);
-}
-
-void rtl931x_set_receive_management_action(int port, rma_ctrl_t type, action_type_t action)
-{
-	u32 value = 0;
-
-	/* hack for value mapping */
-	if (type == GRATARP && action == COPY2CPU)
-		action = TRAP2MASTERCPU;
-
-	switch(action) {
-	case FORWARD:
-		value = 0;
-		break;
-	case DROP:
-		value = 1;
-		break;
-	case TRAP2CPU:
-		value = 2;
-		break;
-	case TRAP2MASTERCPU:
-		value = 3;
-		break;
-	case FLOODALL:
-		value = 4;
-		break;
-	default:
-		break;
-	}
-
-	switch(type) {
-	case BPDU:
-		sw_w32_mask(7 << ((port % 10) * 3), value << ((port % 10) * 3), RTL931X_RMA_BPDU_CTRL + ((port / 10) << 2));
-	break;
-	case PTP:
-		//udp
-		sw_w32_mask(3 << 2, value << 2, RTL931X_RMA_PTP_CTRL + (port << 2));
-		//eth2
-		sw_w32_mask(3, value, RTL931X_RMA_PTP_CTRL + (port << 2));
-	break;
-	case PTP_UDP:
-		sw_w32_mask(3 << 2, value << 2, RTL931X_RMA_PTP_CTRL + (port << 2));
-	break;
-	case PTP_ETH2:
-		sw_w32_mask(3, value, RTL931X_RMA_PTP_CTRL + (port << 2));
-	break;
-	case LLTP:
-		sw_w32_mask(7 << ((port % 10) * 3), value << ((port % 10) * 3), RTL931X_RMA_LLTP_CTRL + ((port / 10) << 2));
-	break;
-	case EAPOL:
-		sw_w32_mask(7 << ((port % 10) * 3), value << ((port % 10) * 3), RTL931X_RMA_EAPOL_CTRL + ((port / 10) << 2));
-	break;
-	case GRATARP:
-		sw_w32_mask(3 << ((port & 0xf) << 1), value << ((port & 0xf) << 1), RTL931X_TRAP_ARP_GRAT_PORT_ACT + ((port >> 4) << 2));
-	break;
-	}
-}
-
-u64 rtl931x_traffic_get(int source)
-{
-	u32 v;
-	struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 6);
-
-	rtl_table_read(r, source);
-	v = sw_r32(rtl_table_data(r, 0));
-	rtl_table_release(r);
-	return v >> 3;
-}
-
-/*
- * Enable traffic between a source port and a destination port matrix
- */
-void rtl931x_traffic_set(int source, u64 dest_matrix)
-{
-	struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 6);
-
-	sw_w32((dest_matrix << 3), rtl_table_data(r, 0));
-	rtl_table_write(r, source);
-	rtl_table_release(r);
-}
-
-void rtl931x_traffic_enable(int source, int dest)
-{
-	struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 6);
-	rtl_table_read(r, source);
-	sw_w32_mask(0, BIT(dest + 3), rtl_table_data(r, 0));
-	rtl_table_write(r, source);
-	rtl_table_release(r);
-}
-
-void rtl931x_traffic_disable(int source, int dest)
-{
-	struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 6);
-	rtl_table_read(r, source);
-	sw_w32_mask(BIT(dest + 3), 0, rtl_table_data(r, 0));
-	rtl_table_write(r, source);
-	rtl_table_release(r);
-}
-
-static u64 rtl931x_l2_hash_seed(u64 mac, u32 vid)
-{
-	u64 v = vid;
-
-	v <<= 48;
-	v |= mac;
-
-	return v;
-}
-
-/*
- * Calculate both the block 0 and the block 1 hash by applyingthe same hash
- * algorithm as the one used currently by the ASIC to the seed, and return
- * both hashes in the lower and higher word of the return value since only 12 bit of
- * the hash are significant.
- */
-static u32 rtl931x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed)
-{
-	u32 h, h0, h1, h2, h3, h4, k0, k1;
-
-	h0 = seed & 0xfff;
-	h1 = (seed >> 12) & 0xfff;
-	h2 = (seed >> 24) & 0xfff;
-	h3 = (seed >> 36) & 0xfff;
-	h4 = (seed >> 48) & 0xfff;
-	h4 = ((h4 & 0x7) << 9) | ((h4 >> 3) & 0x1ff);
-	k0 = h0 ^ h1 ^ h2 ^ h3 ^ h4;
-
-	h0 = seed & 0xfff;
-	h0 = ((h0 & 0x1ff) << 3) | ((h0 >> 9) & 0x7);
-	h1 = (seed >> 12) & 0xfff;
-	h1 = ((h1 & 0x3f) << 6) | ((h1 >> 6) & 0x3f);
-	h2 = (seed >> 24) & 0xfff;
-	h3 = (seed >> 36) & 0xfff;
-	h3 = ((h3 & 0x3f) << 6) | ((h3 >> 6) & 0x3f);
-	h4 = (seed >> 48) & 0xfff;
-	k1 = h0 ^ h1 ^ h2 ^ h3 ^ h4;
-
-	// Algorithm choice for block 0
-	if (sw_r32(RTL931X_L2_CTRL) & BIT(0))
-		h = k1;
-	else
-		h = k0;
-
-	/* Algorithm choice for block 1
-	 * Since k0 and k1 are < 4096, adding 4096 will offset the hash into the second
-	 * half of hash-space
-	 * 4096 is in fact the hash-table size 32768 divided by 4 hashes per bucket
-	 * divided by 2 to divide the hash space in 2
-	 */
-	if (sw_r32(RTL931X_L2_CTRL) & BIT(1))
-		h |= (k1 + 4096) << 16;
-	else
-		h |= (k0 + 4096) << 16;
-
-	return h;
-}
-
-/*
- * Fills an L2 entry structure from the SoC registers
- */
-static void rtl931x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e)
-{
-	pr_debug("In %s valid?\n", __func__);
-	e->valid = !!(r[0] & BIT(31));
-	if (!e->valid)
-		return;
-
-	pr_debug("%s: entry valid, raw: %08x %08x %08x %08x\n", __func__, r[0], r[1], r[2], r[3]);
-	e->is_ip_mc = false;
-	e->is_ipv6_mc = false;
-
-	e->mac[0] = r[0] >> 8;
-	e->mac[1] = r[0];
-	e->mac[2] = r[1] >> 24;
-	e->mac[3] = r[1] >> 16;
-	e->mac[4] = r[1] >> 8;
-	e->mac[5] = r[1];
-
-	e->is_open_flow = !!(r[0] & BIT(30));
-	e->is_pe_forward = !!(r[0] & BIT(29));
-	e->next_hop = !!(r[2] & BIT(30));
-	e->rvid = (r[0] >> 16) & 0xfff;
-
-	/* Is it a unicast entry? check multicast bit */
-	if (!(e->mac[0] & 1)) {
-		e->type = L2_UNICAST;
-		e->is_l2_tunnel = !!(r[2] & BIT(31));
-		e->is_static = !!(r[2] & BIT(13));
-		e->port = (r[2] >> 19) & 0x3ff;
-		// Check for trunk port
-		if (r[2] & BIT(29)) {
-			e->is_trunk = true;
-			e->stack_dev = (e->port >> 9) & 1;
-			e->trunk = e->port & 0x3f;
-		} else {
-			e->is_trunk = false;
-			e->stack_dev = (e->port >> 6) & 0xf;
-			e->port = e->port & 0x3f;
-		}
-
-		e->block_da = !!(r[2] & BIT(14));
-		e->block_sa = !!(r[2] & BIT(15));
-		e->suspended = !!(r[2] & BIT(12));
-		e->age = (r[2] >> 16) & 3;
-
-		// the UC_VID field in hardware is used for the VID or for the route id
-		if (e->next_hop) {
-			e->nh_route_id = r[2] & 0x7ff;
-			e->vid = 0;
-		} else {
-			e->vid = r[2] & 0xfff;
-			e->nh_route_id = 0;
-		}
-		if (e->is_l2_tunnel)
-			e->l2_tunnel_id = ((r[2] & 0xff) << 4) | (r[3] >> 28);
-		// TODO: Implement VLAN conversion
-	} else {
-		e->type = L2_MULTICAST;
-		e->is_local_forward = !!(r[2] & BIT(31));
-		e->is_remote_forward = !!(r[2] & BIT(17));
-		e->mc_portmask_index = (r[2] >> 18) & 0xfff;
-		e->l2_tunnel_list_id = (r[2] >> 4) & 0x1fff;
-	}
-}
-
-/*
- * Fills the 3 SoC table registers r[] with the information of in the rtl838x_l2_entry
- */
-static void rtl931x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e)
-{
-	u32 port;
-
-	if (!e->valid) {
-		r[0] = r[1] = r[2] = 0;
-		return;
-	}
-
-	r[2] = BIT(31);	// Set valid bit
-
-	r[0] = ((u32)e->mac[0]) << 24 | ((u32)e->mac[1]) << 16
-		| ((u32)e->mac[2]) << 8 | ((u32)e->mac[3]);
-	r[1] = ((u32)e->mac[4]) << 24 | ((u32)e->mac[5]) << 16;
-
-	r[2] |= e->next_hop ? BIT(12) : 0;
-
-	if (e->type == L2_UNICAST) {
-		r[2] |= e->is_static ? BIT(14) : 0;
-		r[1] |= e->rvid & 0xfff;
-		r[2] |= (e->port & 0x3ff) << 20;
-		if (e->is_trunk) {
-			r[2] |= BIT(30);
-			port = e->stack_dev << 9 | (e->port & 0x3f);
-		} else {
-			port = (e->stack_dev & 0xf) << 6;
-			port |= e->port & 0x3f;
-		}
-		r[2] |= port << 20;
-		r[2] |= e->block_da ? BIT(15) : 0;
-		r[2] |= e->block_sa ? BIT(17) : 0;
-		r[2] |= e->suspended ? BIT(13) : 0;
-		r[2] |= (e->age & 0x3) << 17;
-		// the UC_VID field in hardware is used for the VID or for the route id
-		if (e->next_hop)
-			r[2] |= e->nh_route_id & 0x7ff;
-		else
-			r[2] |= e->vid & 0xfff;
-	} else { // L2_MULTICAST
-		r[2] |= (e->mc_portmask_index & 0x3ff) << 16;
-		r[2] |= e->mc_mac_index & 0x7ff;
-	}
-}
-
-/*
- * Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table
- * hash is the id of the bucket and pos is the position of the entry in that bucket
- * The data read from the SoC is filled into rtl838x_l2_entry
- */
-static u64 rtl931x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e)
-{
-	u32 r[4];
-	struct table_reg *q = rtl_table_get(RTL9310_TBL_0, 0);
-	u32 idx;
-	int i;
-	u64 mac;
-	u64 seed;
-
-	pr_debug("%s: hash %08x, pos: %d\n", __func__, hash, pos);
-
-	/* On the RTL93xx, 2 different hash algorithms are used making it a total of
-	 * 8 buckets that need to be searched, 4 for each hash-half
-	 * Use second hash space when bucket is between 4 and 8 */
-	if (pos >= 4) {
-		pos -= 4;
-		hash >>= 16;
-	} else {
-		hash &= 0xffff;
-	}
-
-	idx = (0 << 14) | (hash << 2) | pos; // Search SRAM, with hash and at pos in bucket
-	pr_debug("%s: NOW hash %08x, pos: %d\n", __func__, hash, pos);
-
-	rtl_table_read(q, idx);
-	for (i = 0; i < 4; i++)
-		r[i] = sw_r32(rtl_table_data(q, i));
-
-	rtl_table_release(q);
-
-	rtl931x_fill_l2_entry(r, e);
-
-	pr_debug("%s: valid: %d, nh: %d\n", __func__, e->valid, e->next_hop);
-	if (!e->valid)
-		return 0;
-
-	mac = ((u64)e->mac[0]) << 40 | ((u64)e->mac[1]) << 32 | ((u64)e->mac[2]) << 24
-		| ((u64)e->mac[3]) << 16 | ((u64)e->mac[4]) << 8 | ((u64)e->mac[5]);
-
-	seed = rtl931x_l2_hash_seed(mac, e->rvid);
-	pr_debug("%s: mac %016llx, seed %016llx\n", __func__, mac, seed);
-	// return vid with concatenated mac as unique id
-	return seed;
-}
-
-static u64 rtl931x_read_cam(int idx, struct rtl838x_l2_entry *e)
-{
-		return 0;
-}
-
-static void rtl931x_write_cam(int idx, struct rtl838x_l2_entry *e)
-{
-}
-
-static void rtl931x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e)
-{
-	u32 r[4];
-	struct table_reg *q = rtl_table_get(RTL9310_TBL_0, 0);
-	u32 idx = (0 << 14) | (hash << 2) | pos; // Access SRAM, with hash and at pos in bucket
-	int i;
-
-	pr_info("%s: hash %d, pos %d\n", __func__, hash, pos);
-	pr_info("%s: index %d -> mac %02x:%02x:%02x:%02x:%02x:%02x\n", __func__, idx,
-		e->mac[0], e->mac[1], e->mac[2], e->mac[3],e->mac[4],e->mac[5]);
-
-	rtl931x_fill_l2_row(r, e);
-	pr_info("%s: %d: %08x %08x %08x\n", __func__, idx, r[0], r[1], r[2]);
-
-	for (i= 0; i < 4; i++)
-		sw_w32(r[i], rtl_table_data(q, i));
-
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-
-}
-
-static void rtl931x_vlan_fwd_on_inner(int port, bool is_set)
-{
-	// Always set all tag modes to fwd based on either inner or outer tag
-	if (is_set)
-		sw_w32_mask(0, 0xf, RTL931X_VLAN_PORT_FWD + (port << 2));
-	else
-		sw_w32_mask(0xf, 0, RTL931X_VLAN_PORT_FWD + (port << 2));
-}
-
-static void rtl931x_vlan_profile_setup(int profile)
-{
-	u32 p[7];
-	int i;
-
-	pr_info("In %s\n", __func__);
-
-	if (profile > 15)
-		return;
-
-	p[0] = sw_r32(RTL931X_VLAN_PROFILE_SET(profile));
-
-	// Enable routing of Ipv4/6 Unicast and IPv4/6 Multicast traffic
-	//p[0] |= BIT(17) | BIT(16) | BIT(13) | BIT(12);
-	p[0] |= 0x3 << 11; // COPY2CPU
-
-	p[1] = 0x1FFFFFF; // L2 unknwon MC flooding portmask all ports, including the CPU-port
-	p[2] = 0xFFFFFFFF;
-	p[3] = 0x1FFFFFF; // IPv4 unknwon MC flooding portmask
-	p[4] = 0xFFFFFFFF;
-	p[5] = 0x1FFFFFF; // IPv6 unknwon MC flooding portmask
-	p[6] = 0xFFFFFFFF;
-
-	for (i = 0; i < 7; i++)
-		sw_w32(p[i], RTL931X_VLAN_PROFILE_SET(profile) + i * 4);
-	pr_info("Leaving %s\n", __func__);
-}
-
-static void rtl931x_l2_learning_setup(void)
-{
-	// Portmask for flooding broadcast traffic
-	rtl839x_set_port_reg_be(0x1FFFFFFFFFFFFFF, RTL931X_L2_BC_FLD_PMSK);
-
-	// Portmask for flooding unicast traffic with unknown destination
-	rtl839x_set_port_reg_be(0x1FFFFFFFFFFFFFF, RTL931X_L2_UNKN_UC_FLD_PMSK);
-
-	// Limit learning to maximum: 64k entries, after that just flood (bits 0-2)
-	sw_w32((0xffff << 3) | FORWARD, RTL931X_L2_LRN_CONSTRT_CTRL);
-}
-
-static u64 rtl931x_read_mcast_pmask(int idx)
-{
-	u64 portmask;
-	// Read MC_PMSK (2) via register RTL9310_TBL_0
-	struct table_reg *q = rtl_table_get(RTL9310_TBL_0, 2);
-
-	rtl_table_read(q, idx);
-	portmask = sw_r32(rtl_table_data(q, 0));
-	portmask <<= 32;
-	portmask |= sw_r32(rtl_table_data(q, 1));
-	portmask >>= 7;
-	rtl_table_release(q);
-
-	pr_debug("%s: Index idx %d has portmask %016llx\n", __func__, idx, portmask);
-	return portmask;
-}
-
-static void rtl931x_write_mcast_pmask(int idx, u64 portmask)
-{
-	u64 pm = portmask;
-
-	// Access MC_PMSK (2) via register RTL9310_TBL_0
-	struct table_reg *q = rtl_table_get(RTL9310_TBL_0, 2);
-
-	pr_debug("%s: Index idx %d has portmask %016llx\n", __func__, idx, pm);
-	pm <<= 7;
-	sw_w32((u32)(pm >> 32), rtl_table_data(q, 0));
-	sw_w32((u32)pm, rtl_table_data(q, 1));
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-}
-
-
-static int rtl931x_set_ageing_time(unsigned long msec)
-{
-	int t = sw_r32(RTL931X_L2_AGE_CTRL);
-
-	t &= 0x1FFFFF;
-	t = (t * 8) / 10;
-	pr_debug("L2 AGING time: %d sec\n", t);
-
-	t = (msec / 100 + 7) / 8;
-	t = t > 0x1FFFFF ? 0x1FFFFF : t;
-	sw_w32_mask(0x1FFFFF, t, RTL931X_L2_AGE_CTRL);
-	pr_debug("Dynamic aging for ports: %x\n", sw_r32(RTL931X_L2_PORT_AGE_CTRL));
-	return 0;
-}
-void rtl931x_sw_init(struct rtl838x_switch_priv *priv)
-{
-//	rtl931x_sds_init(priv);
-}
-
-static void rtl931x_pie_lookup_enable(struct rtl838x_switch_priv *priv, int index)
-{
-	int block = index / PIE_BLOCK_SIZE;
-
-	sw_w32_mask(0, BIT(block), RTL931X_PIE_BLK_LOOKUP_CTRL);
-}
-
-/*
- * Fills the data in the intermediate representation in the pie_rule structure
- * into a data field for a given template field field_type
- * TODO: This function looks very similar to the function of the rtl9300, but
- * since it uses the physical template_field_id, which are different for each
- * SoC and there are other field types, it is actually not. If we would also use
- * an intermediate representation for a field type, we would could have one
- * pie_data_fill function for all SoCs, provided we have also for each SoC a
- * function to map between physical and intermediate field type
- */
-int rtl931x_pie_data_fill(enum template_field_id field_type, struct pie_rule *pr, u16 *data, u16 *data_m)
-{
-	*data = *data_m = 0;
-
-	switch (field_type) {
-	case TEMPLATE_FIELD_SPM0:
-		*data = pr->spm;
-		*data_m = pr->spm_m;
-		break;
-	case TEMPLATE_FIELD_SPM1:
-		*data = pr->spm >> 16;
-		*data_m = pr->spm_m >> 16;
-		break;
-	case TEMPLATE_FIELD_OTAG:
-		*data = pr->otag;
-		*data_m = pr->otag_m;
-		break;
-	case TEMPLATE_FIELD_SMAC0:
-		*data = pr->smac[4];
-		*data = (*data << 8) | pr->smac[5];
-		*data_m = pr->smac_m[4];
-		*data_m = (*data_m << 8) | pr->smac_m[5];
-		break;
-	case TEMPLATE_FIELD_SMAC1:
-		*data = pr->smac[2];
-		*data = (*data << 8) | pr->smac[3];
-		*data_m = pr->smac_m[2];
-		*data_m = (*data_m << 8) | pr->smac_m[3];
-		break;
-	case TEMPLATE_FIELD_SMAC2:
-		*data = pr->smac[0];
-		*data = (*data << 8) | pr->smac[1];
-		*data_m = pr->smac_m[0];
-		*data_m = (*data_m << 8) | pr->smac_m[1];
-		break;
-	case TEMPLATE_FIELD_DMAC0:
-		*data = pr->dmac[4];
-		*data = (*data << 8) | pr->dmac[5];
-		*data_m = pr->dmac_m[4];
-		*data_m = (*data_m << 8) | pr->dmac_m[5];
-		break;
-	case TEMPLATE_FIELD_DMAC1:
-		*data = pr->dmac[2];
-		*data = (*data << 8) | pr->dmac[3];
-		*data_m = pr->dmac_m[2];
-		*data_m = (*data_m << 8) | pr->dmac_m[3];
-		break;
-	case TEMPLATE_FIELD_DMAC2:
-		*data = pr->dmac[0];
-		*data = (*data << 8) | pr->dmac[1];
-		*data_m = pr->dmac_m[0];
-		*data_m = (*data_m << 8) | pr->dmac_m[1];
-		break;
-	case TEMPLATE_FIELD_ETHERTYPE:
-		*data = pr->ethertype;
-		*data_m = pr->ethertype_m;
-		break;
-	case TEMPLATE_FIELD_ITAG:
-		*data = pr->itag;
-		*data_m = pr->itag_m;
-		break;
-	case TEMPLATE_FIELD_SIP0:
-		if (pr->is_ipv6) {
-			*data = pr->sip6.s6_addr16[7];
-			*data_m = pr->sip6_m.s6_addr16[7];
-		} else {
-			*data = pr->sip;
-			*data_m = pr->sip_m;
-		}
-		break;
-	case TEMPLATE_FIELD_SIP1:
-		if (pr->is_ipv6) {
-			*data = pr->sip6.s6_addr16[6];
-			*data_m = pr->sip6_m.s6_addr16[6];
-		} else {
-			*data = pr->sip >> 16;
-			*data_m = pr->sip_m >> 16;
-		}
-		break;
-	case TEMPLATE_FIELD_SIP2:
-	case TEMPLATE_FIELD_SIP3:
-	case TEMPLATE_FIELD_SIP4:
-	case TEMPLATE_FIELD_SIP5:
-	case TEMPLATE_FIELD_SIP6:
-	case TEMPLATE_FIELD_SIP7:
-		*data = pr->sip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)];
-		*data_m = pr->sip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)];
-		break;
-
-	case TEMPLATE_FIELD_DIP0:
-		if (pr->is_ipv6) {
-			*data = pr->dip6.s6_addr16[7];
-			*data_m = pr->dip6_m.s6_addr16[7];
-		} else {
-			*data = pr->dip;
-			*data_m = pr->dip_m;
-		}
-		break;
-		case TEMPLATE_FIELD_DIP1:
-		if (pr->is_ipv6) {
-			*data = pr->dip6.s6_addr16[6];
-			*data_m = pr->dip6_m.s6_addr16[6];
-		} else {
-			*data = pr->dip >> 16;
-			*data_m = pr->dip_m >> 16;
-		}
-		break;
-
-	case TEMPLATE_FIELD_DIP2:
-	case TEMPLATE_FIELD_DIP3:
-	case TEMPLATE_FIELD_DIP4:
-	case TEMPLATE_FIELD_DIP5:
-	case TEMPLATE_FIELD_DIP6:
-	case TEMPLATE_FIELD_DIP7:
-		*data = pr->dip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)];
-		*data_m = pr->dip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)];
-		break;
-
-	case TEMPLATE_FIELD_IP_TOS_PROTO:
-		*data = pr->tos_proto;
-		*data_m = pr->tos_proto_m;
-		break;
-	case TEMPLATE_FIELD_L4_SPORT:
-		*data = pr->sport;
-		*data_m = pr->sport_m;
-		break;
-	case TEMPLATE_FIELD_L4_DPORT:
-		*data = pr->dport;
-		*data_m = pr->dport_m;
-		break;
-	case TEMPLATE_FIELD_DSAP_SSAP:
-		*data = pr->dsap_ssap;
-		*data_m = pr->dsap_ssap_m;
-		break;
-	case TEMPLATE_FIELD_TCP_INFO:
-		*data = pr->tcp_info;
-		*data_m = pr->tcp_info_m;
-		break;
-	case TEMPLATE_FIELD_RANGE_CHK:
-		pr_info("TEMPLATE_FIELD_RANGE_CHK: not configured\n");
-		break;
-	default:
-		pr_info("%s: unknown field %d\n", __func__, field_type);
-		return -1;
-	}
-
-	return 0;
-}
-
-/*
- * Reads the intermediate representation of the templated match-fields of the
- * PIE rule in the pie_rule structure and fills in the raw data fields in the
- * raw register space r[].
- * The register space configuration size is identical for the RTL8380/90 and RTL9300,
- * however the RTL931X has 2 more registers / fields and the physical field-ids are different
- * on all SoCs
- * On the RTL9300 the mask fields are not word-aligend!
- */
-static void rtl931x_write_pie_templated(u32 r[], struct pie_rule *pr, enum template_field_id t[])
-{
-	int i;
-	u16 data, data_m;
-
-	for (i = 0; i < N_FIXED_FIELDS; i++) {
-		rtl931x_pie_data_fill(t[i], pr, &data, &data_m);
-
-		// On the RTL9300, the mask fields are not word aligned!
-		if (!(i % 2)) {
-			r[5 - i / 2] = data;
-			r[12 - i / 2] |= ((u32)data_m << 8);
-		} else {
-			r[5 - i / 2] |= ((u32)data) << 16;
-			r[12 - i / 2] |= ((u32)data_m) << 24;
-			r[11 - i / 2] |= ((u32)data_m) >> 8;
-		}
-	}
-}
-
-static void rtl931x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr)
-{
-	pr->mgnt_vlan = r[7] & BIT(31);
-	if (pr->phase == PHASE_IACL)
-		pr->dmac_hit_sw = r[7] & BIT(30);
-	else  // TODO: EACL/VACL phase handling
-		pr->content_too_deep = r[7] & BIT(30);
-	pr->not_first_frag = r[7]  & BIT(29);
-	pr->frame_type_l4 = (r[7] >> 26) & 7;
-	pr->frame_type = (r[7] >> 24) & 3;
-	pr->otag_fmt = (r[7] >> 23) & 1;
-	pr->itag_fmt = (r[7] >> 22) & 1;
-	pr->otag_exist = (r[7] >> 21) & 1;
-	pr->itag_exist = (r[7] >> 20) & 1;
-	pr->frame_type_l2 = (r[7] >> 18) & 3;
-	pr->igr_normal_port = (r[7] >> 17) & 1;
-	pr->tid = (r[7] >> 16) & 1;
-
-	pr->mgnt_vlan_m = r[14] & BIT(15);
-	if (pr->phase == PHASE_IACL)
-		pr->dmac_hit_sw_m = r[14] & BIT(14);
-	else
-		pr->content_too_deep_m = r[14] & BIT(14);
-	pr->not_first_frag_m = r[14] & BIT(13);
-	pr->frame_type_l4_m = (r[14] >> 10) & 7;
-	pr->frame_type_m = (r[14] >> 8) & 3;
-	pr->otag_fmt_m = r[14] & BIT(7);
-	pr->itag_fmt_m = r[14] & BIT(6);
-	pr->otag_exist_m = r[14] & BIT(5);
-	pr->itag_exist_m = r[14] & BIT (4);
-	pr->frame_type_l2_m = (r[14] >> 2) & 3;
-	pr->igr_normal_port_m = r[14] & BIT(1);
-	pr->tid_m = r[14] & 1;
-
-	pr->valid = r[15] & BIT(31);
-	pr->cond_not = r[15] & BIT(30);
-	pr->cond_and1 = r[15] & BIT(29);
-	pr->cond_and2 = r[15] & BIT(28);
-}
-
-static void rtl931x_write_pie_fixed_fields(u32 r[],  struct pie_rule *pr)
-{
-	r[7] |= pr->mgnt_vlan ? BIT(31) : 0;
-	if (pr->phase == PHASE_IACL)
-		r[7] |= pr->dmac_hit_sw ? BIT(30) : 0;
-	else
-		r[7] |= pr->content_too_deep ? BIT(30) : 0;
-	r[7] |= pr->not_first_frag ? BIT(29) : 0;
-	r[7] |= ((u32) (pr->frame_type_l4 & 0x7)) << 26;
-	r[7] |= ((u32) (pr->frame_type & 0x3)) << 24;
-	r[7] |= pr->otag_fmt ? BIT(23) : 0;
-	r[7] |= pr->itag_fmt ? BIT(22) : 0;
-	r[7] |= pr->otag_exist ? BIT(21) : 0;
-	r[7] |= pr->itag_exist ? BIT(20) : 0;
-	r[7] |= ((u32) (pr->frame_type_l2 & 0x3)) << 18;
-	r[7] |= pr->igr_normal_port ? BIT(17) : 0;
-	r[7] |= ((u32) (pr->tid & 0x1)) << 16;
-
-	r[14] |= pr->mgnt_vlan_m ? BIT(15) : 0;
-	if (pr->phase == PHASE_IACL)
-		r[14] |= pr->dmac_hit_sw_m ? BIT(14) : 0;
-	else
-		r[14] |= pr->content_too_deep_m ? BIT(14) : 0;
-	r[14] |= pr->not_first_frag_m ? BIT(13) : 0;
-	r[14] |= ((u32) (pr->frame_type_l4_m & 0x7)) << 10;
-	r[14] |= ((u32) (pr->frame_type_m & 0x3)) << 8;
-	r[14] |= pr->otag_fmt_m ? BIT(7) : 0;
-	r[14] |= pr->itag_fmt_m ? BIT(6) : 0;
-	r[14] |= pr->otag_exist_m ? BIT(5) : 0;
-	r[14] |= pr->itag_exist_m ? BIT(4) : 0;
-	r[14] |= ((u32) (pr->frame_type_l2_m & 0x3)) << 2;
-	r[14] |= pr->igr_normal_port_m ? BIT(1) : 0;
-	r[14] |= (u32) (pr->tid_m & 0x1);
-
-	r[15] |= pr->valid ? BIT(31) : 0;
-	r[15] |= pr->cond_not ? BIT(30) : 0;
-	r[15] |= pr->cond_and1 ? BIT(29) : 0;
-	r[15] |= pr->cond_and2 ? BIT(28) : 0;
-}
-
-static void rtl931x_write_pie_action(u32 r[],  struct pie_rule *pr)
-{
-	// Either drop or forward
-	if (pr->drop) {
-		r[15] |= BIT(11) | BIT(12) | BIT(13); // Do Green, Yellow and Red drops
-		// Actually DROP, not PERMIT in Green / Yellow / Red
-		r[16] |= BIT(27) | BIT(28) | BIT(29);
-	} else {
-		r[15] |= pr->fwd_sel ? BIT(14) : 0;
-		r[16] |= pr->fwd_act << 24;
-		r[16] |= BIT(21); // We overwrite any drop
-	}
-	if (pr->phase == PHASE_VACL)
-		r[16] |= pr->fwd_sa_lrn ? BIT(22) : 0;
-	r[15] |= pr->bypass_sel ? BIT(10) : 0;
-	r[15] |= pr->nopri_sel ? BIT(21) : 0;
-	r[15] |= pr->tagst_sel ? BIT(20) : 0;
-	r[15] |= pr->ovid_sel ? BIT(18) : 0;
-	r[15] |= pr->ivid_sel ? BIT(16) : 0;
-	r[15] |= pr->meter_sel ? BIT(27) : 0;
-	r[15] |= pr->mir_sel ? BIT(15) : 0;
-	r[15] |= pr->log_sel ? BIT(26) : 0;
-
-	r[16] |= ((u32)(pr->fwd_data & 0xfff)) << 9;
-//	r[15] |= pr->log_octets ? BIT(31) : 0;
-	r[15] |= (u32)(pr->meter_data) >> 2;
-	r[16] |= (((u32)(pr->meter_data) >> 7) & 0x3) << 29;
-
-	r[16] |= ((u32)(pr->ivid_act & 0x3)) << 21;
-	r[15] |= ((u32)(pr->ivid_data & 0xfff)) << 9;
-	r[16] |= ((u32)(pr->ovid_act & 0x3)) << 30;
-	r[16] |= ((u32)(pr->ovid_data & 0xfff)) << 16;
-	r[16] |= ((u32)(pr->mir_data & 0x3)) << 6;
-	r[17] |= ((u32)(pr->tagst_data & 0xf)) << 28;
-	r[17] |= ((u32)(pr->nopri_data & 0x7)) << 25;
-	r[17] |= pr->bypass_ibc_sc ? BIT(16) : 0;
-}
-
-void rtl931x_pie_rule_dump_raw(u32 r[])
-{
-	pr_info("Raw IACL table entry:\n");
-	pr_info("r 0 - 7: %08x %08x %08x %08x %08x %08x %08x %08x\n",
-		r[0], r[1], r[2], r[3], r[4], r[5], r[6], r[7]);
-	pr_info("r 8 - 15: %08x %08x %08x %08x %08x %08x %08x %08x\n",
-		r[8], r[9], r[10], r[11], r[12], r[13], r[14], r[15]);
-	pr_info("r 16 - 18: %08x %08x %08x\n", r[16], r[17], r[18]);
-	pr_info("Match  : %08x %08x %08x %08x %08x %08x\n", r[0], r[1], r[2], r[3], r[4], r[5]);
-	pr_info("Fixed  : %06x\n", r[6] >> 8);
-	pr_info("Match M: %08x %08x %08x %08x %08x %08x\n",
-		(r[6] << 24) | (r[7] >> 8), (r[7] << 24) | (r[8] >> 8), (r[8] << 24) | (r[9] >> 8),
-		(r[9] << 24) | (r[10] >> 8), (r[10] << 24) | (r[11] >> 8),
-		(r[11] << 24) | (r[12] >> 8));
-	pr_info("R[13]:   %08x\n", r[13]);
-	pr_info("Fixed M: %06x\n", ((r[12] << 16) | (r[13] >> 16)) & 0xffffff);
-	pr_info("Valid / not / and1 / and2 : %1x\n", (r[13] >> 12) & 0xf);
-	pr_info("r 13-16: %08x %08x %08x %08x\n", r[13], r[14], r[15], r[16]);
-}
-
-static int rtl931x_pie_rule_write(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr)
-{
-	// Access IACL table (0) via register 1, the table size is 4096
-	struct table_reg *q = rtl_table_get(RTL9310_TBL_1, 0);
-	u32 r[22];
-	int i;
-	int block = idx / PIE_BLOCK_SIZE;
-	u32 t_select = sw_r32(RTL931X_PIE_BLK_TMPLTE_CTRL(block));
-
-	pr_info("%s: %d, t_select: %08x\n", __func__, idx, t_select);
-
-	for (i = 0; i < 22; i++)
-		r[i] = 0;
-
-	if (!pr->valid) {
-		rtl_table_write(q, idx);
-		rtl_table_release(q);
-		return 0;
-	}
-	rtl931x_write_pie_fixed_fields(r, pr);
-
-	pr_info("%s: template %d\n", __func__, (t_select >> (pr->tid * 4)) & 0xf);
-	rtl931x_write_pie_templated(r, pr, fixed_templates[(t_select >> (pr->tid * 4)) & 0xf]);
-
-	rtl931x_write_pie_action(r, pr);
-
-	rtl931x_pie_rule_dump_raw(r);
-
-	for (i = 0; i < 22; i++)
-		sw_w32(r[i], rtl_table_data(q, i));
-
-	rtl_table_write(q, idx);
-	rtl_table_release(q);
-
-	return 0;
-}
-
-static bool rtl931x_pie_templ_has(int t, enum template_field_id field_type)
-{
-	int i;
-	enum template_field_id ft;
-
-	for (i = 0; i < N_FIXED_FIELDS_RTL931X; i++) {
-		ft = fixed_templates[t][i];
-		if (field_type == ft)
-			return true;
-	}
-
-	return false;
-}
-
-/*
- * Verify that the rule pr is compatible with a given template t in block block
- * Note that this function is SoC specific since the values of e.g. TEMPLATE_FIELD_SIP0
- * depend on the SoC
- */
-static int rtl931x_pie_verify_template(struct rtl838x_switch_priv *priv,
-				       struct pie_rule *pr, int t, int block)
-{
-	int i;
-
-	if (!pr->is_ipv6 && pr->sip_m && !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_SIP0))
-		return -1;
-
-	if (!pr->is_ipv6 && pr->dip_m && !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_DIP0))
-		return -1;
-
-	if (pr->is_ipv6) {
-		if ((pr->sip6_m.s6_addr32[0] || pr->sip6_m.s6_addr32[1]
-			|| pr->sip6_m.s6_addr32[2] || pr->sip6_m.s6_addr32[3])
-			&& !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_SIP2))
-			return -1;
-		if ((pr->dip6_m.s6_addr32[0] || pr->dip6_m.s6_addr32[1]
-			|| pr->dip6_m.s6_addr32[2] || pr->dip6_m.s6_addr32[3])
-			&& !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_DIP2))
-			return -1;
-	}
-
-	if (ether_addr_to_u64(pr->smac) && !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_SMAC0))
-		return -1;
-
-	if (ether_addr_to_u64(pr->dmac) && !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_DMAC0))
-		return -1;
-
-	// TODO: Check more
-
-	i = find_first_zero_bit(&priv->pie_use_bm[block * 4], PIE_BLOCK_SIZE);
-
-	if (i >= PIE_BLOCK_SIZE)
-		return -1;
-
-	return i + PIE_BLOCK_SIZE * block;
-}
-
-static int rtl931x_pie_rule_add(struct rtl838x_switch_priv *priv, struct pie_rule *pr)
-{
-	int idx, block, j, t;
-	int min_block = 0;
-	int max_block = priv->n_pie_blocks / 2;
-
-	if (pr->is_egress) {
-		min_block = max_block;
-		max_block = priv->n_pie_blocks;
-	}
-	pr_info("In %s\n", __func__);
-
-	mutex_lock(&priv->pie_mutex);
-
-	for (block = min_block; block < max_block; block++) {
-		for (j = 0; j < 2; j++) {
-			t = (sw_r32(RTL931X_PIE_BLK_TMPLTE_CTRL(block)) >> (j * 4)) & 0xf;
-			pr_info("Testing block %d, template %d, template id %d\n", block, j, t);
-			pr_info("%s: %08x\n",
-				__func__, sw_r32(RTL931X_PIE_BLK_TMPLTE_CTRL(block)));
-			idx = rtl931x_pie_verify_template(priv, pr, t, block);
-			if (idx >= 0)
-				break;
-		}
-		if (j < 2)
-			break;
-	}
-
-	if (block >= priv->n_pie_blocks) {
-		mutex_unlock(&priv->pie_mutex);
-		return -EOPNOTSUPP;
-	}
-
-	pr_info("Using block: %d, index %d, template-id %d\n", block, idx, j);
-	set_bit(idx, priv->pie_use_bm);
-
-	pr->valid = true;
-	pr->tid = j;  // Mapped to template number
-	pr->tid_m = 0x1;
-	pr->id = idx;
-
-	rtl931x_pie_lookup_enable(priv, idx);
-	rtl931x_pie_rule_write(priv, idx, pr);
-
-	mutex_unlock(&priv->pie_mutex);
-	return 0;
-}
-
-/*
- * Delete a range of Packet Inspection Engine rules
- */
-static int rtl931x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from, int index_to)
-{
-	u32 v = (index_from << 1)| (index_to << 13 ) | BIT(0);
-
-	pr_info("%s: from %d to %d\n", __func__, index_from, index_to);
-	mutex_lock(&priv->reg_mutex);
-
-	// Write from-to and execute bit into control register
-	sw_w32(v, RTL931X_PIE_CLR_CTRL);
-
-	// Wait until command has completed
-	do {
-	} while (sw_r32(RTL931X_PIE_CLR_CTRL) & BIT(0));
-
-	mutex_unlock(&priv->reg_mutex);
-	return 0;
-}
-
-static void rtl931x_pie_rule_rm(struct rtl838x_switch_priv *priv, struct pie_rule *pr)
-{
-	int idx = pr->id;
-
-	rtl931x_pie_rule_del(priv, idx, idx);
-	clear_bit(idx, priv->pie_use_bm);
-}
-
-static void rtl931x_pie_init(struct rtl838x_switch_priv *priv)
-{
-	int i;
-	u32 template_selectors;
-
-	mutex_init(&priv->pie_mutex);
-
-	pr_info("%s\n", __func__);
-	// Enable ACL lookup on all ports, including CPU_PORT
-	for (i = 0; i <= priv->cpu_port; i++)
-		sw_w32(1, RTL931X_ACL_PORT_LOOKUP_CTRL(i));
-
-	// Include IPG in metering
-	sw_w32_mask(0, 1, RTL931X_METER_GLB_CTRL);
-
-	// Delete all present rules, block size is 128 on all SoC families
-	rtl931x_pie_rule_del(priv, 0, priv->n_pie_blocks * 128 - 1);
-
-	// Assign first half blocks 0-7 to VACL phase, second half to IACL
-	// 3 bits are used for each block, values for PIE blocks are
-	// 6: Disabled, 0: VACL, 1: IACL, 2: EACL
-	// And for OpenFlow Flow blocks: 3: Ingress Flow table 0,
-	// 4: Ingress Flow Table 3, 5: Egress flow table 0
-	for (i = 0; i < priv->n_pie_blocks; i++) {
-		int pos = (i % 10) * 3;
-		u32 r = RTL931X_PIE_BLK_PHASE_CTRL + 4 * (i / 10);
-
-		if (i < priv->n_pie_blocks / 2)
-			sw_w32_mask(0x7 << pos, 0, r);
-		else
-			sw_w32_mask(0x7 << pos, 1 << pos, r);
-	}
-
-	// Enable predefined templates 0, 1 for first quarter of all blocks
-	template_selectors = 0 | (1 << 4);
-	for (i = 0; i < priv->n_pie_blocks / 4; i++)
-		sw_w32(template_selectors, RTL931X_PIE_BLK_TMPLTE_CTRL(i));
-
-	// Enable predefined templates 2, 3 for second quarter of all blocks
-	template_selectors = 2 | (3 << 4);
-	for (i = priv->n_pie_blocks / 4; i < priv->n_pie_blocks / 2; i++)
-		sw_w32(template_selectors, RTL931X_PIE_BLK_TMPLTE_CTRL(i));
-
-	// Enable predefined templates 0, 1 for third quater of all blocks
-	template_selectors = 0 | (1 << 4);
-	for (i = priv->n_pie_blocks / 2; i < priv->n_pie_blocks * 3 / 4; i++)
-		sw_w32(template_selectors, RTL931X_PIE_BLK_TMPLTE_CTRL(i));
-
-	// Enable predefined templates 2, 3 for fourth quater of all blocks
-	template_selectors = 2 | (3 << 4);
-	for (i = priv->n_pie_blocks * 3 / 4; i < priv->n_pie_blocks; i++)
-		sw_w32(template_selectors, RTL931X_PIE_BLK_TMPLTE_CTRL(i));
-
-}
-
-int rtl931x_l3_setup(struct rtl838x_switch_priv *priv)
-{
-	return 0;
-}
-
-void rtl931x_vlan_port_keep_tag_set(int port, bool keep_outer, bool keep_inner)
-{
-	sw_w32(FIELD_PREP(RTL931X_VLAN_PORT_TAG_EGR_OTAG_STS_MASK,
-			  keep_outer ? RTL931X_VLAN_PORT_TAG_STS_TAGGED : RTL931X_VLAN_PORT_TAG_STS_UNTAG) |
-	       FIELD_PREP(RTL931X_VLAN_PORT_TAG_EGR_ITAG_STS_MASK,
-			  keep_inner ? RTL931X_VLAN_PORT_TAG_STS_TAGGED : RTL931X_VLAN_PORT_TAG_STS_UNTAG),
-	       RTL931X_VLAN_PORT_TAG_CTRL(port));
-}
-
-void rtl931x_vlan_port_pvidmode_set(int port, enum pbvlan_type type, enum pbvlan_mode mode)
-{
-	if (type == PBVLAN_TYPE_INNER)
-		sw_w32_mask(0x3 << 12, mode << 12, RTL931X_VLAN_PORT_IGR_CTRL + (port << 2));
-	else
-		sw_w32_mask(0x3 << 26, mode << 26, RTL931X_VLAN_PORT_IGR_CTRL + (port << 2));
-}
-
-void rtl931x_vlan_port_pvid_set(int port, enum pbvlan_type type, int pvid)
-{
-	if (type == PBVLAN_TYPE_INNER)
-		sw_w32_mask(0xfff, pvid, RTL931X_VLAN_PORT_IGR_CTRL + (port << 2));
-	else
-		sw_w32_mask(0xfff << 14, pvid << 14, RTL931X_VLAN_PORT_IGR_CTRL + (port << 2));
-}
-
-static void rtl931x_set_igr_filter(int port, enum igr_filter state)
-{
-	sw_w32_mask(0x3 << ((port & 0xf)<<1), state << ((port & 0xf)<<1),
-		    RTL931X_VLAN_PORT_IGR_FLTR + (((port >> 4) << 2)));
-}
-
-static void rtl931x_set_egr_filter(int port,  enum egr_filter state)
-{
-	sw_w32_mask(0x1 << (port % 0x20), state << (port % 0x20),
-		    RTL931X_VLAN_PORT_EGR_FLTR + (((port >> 5) << 2)));
-}
-
-void rtl931x_set_distribution_algorithm(int group, int algoidx, u32 algomsk)
-{
-	u32 l3shift = 0;
-	u32 newmask = 0;
-
-	/* TODO: for now we set algoidx to 0 */
-	algoidx=0;
-
-	if (algomsk & TRUNK_DISTRIBUTION_ALGO_SIP_BIT) {
-		l3shift = 4;
-		newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SIP_BIT;
-	}
-	if (algomsk & TRUNK_DISTRIBUTION_ALGO_DIP_BIT) {
-		l3shift = 4;
-		newmask |= TRUNK_DISTRIBUTION_ALGO_L3_DIP_BIT;
-	}
-	if (algomsk & TRUNK_DISTRIBUTION_ALGO_SRC_L4PORT_BIT) {
-		l3shift = 4;
-		newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SRC_L4PORT_BIT;
-	}
-	if (algomsk & TRUNK_DISTRIBUTION_ALGO_SRC_L4PORT_BIT) {
-		l3shift = 4;
-		newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SRC_L4PORT_BIT;
-	}
-
-	if (l3shift == 4) {
-		if (algomsk & TRUNK_DISTRIBUTION_ALGO_SMAC_BIT)
-			newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SMAC_BIT;
-		if (algomsk & TRUNK_DISTRIBUTION_ALGO_DMAC_BIT)
-			newmask |= TRUNK_DISTRIBUTION_ALGO_L3_DMAC_BIT;
-	} else {
-		if (algomsk & TRUNK_DISTRIBUTION_ALGO_SMAC_BIT)
-			newmask |= TRUNK_DISTRIBUTION_ALGO_L2_SMAC_BIT;
-		if (algomsk & TRUNK_DISTRIBUTION_ALGO_DMAC_BIT)
-			newmask |= TRUNK_DISTRIBUTION_ALGO_L2_DMAC_BIT;
-	}
-
-	sw_w32(newmask << l3shift, RTL931X_TRK_HASH_CTRL + (algoidx << 2));
-}
-
-static void rtl931x_led_init(struct rtl838x_switch_priv *priv)
-{
-	int i, pos;
-	u32 v, set;
-	u64 pm_copper = 0, pm_fiber = 0;
-	u32 setlen;
-	const __be32 *led_set;
-	char set_name[9];
-	struct device_node *node;
-
-	pr_info("%s called\n", __func__);
-	node = of_find_compatible_node(NULL, NULL, "realtek,rtl9300-leds");
-	if (!node) {
-		pr_info("%s No compatible LED node found\n", __func__);
-		return;
-	}
-
-	for (i= 0; i < priv->cpu_port; i++) {
-		pos = (i << 1) % 32;
-		sw_w32_mask(0x3 << pos, 0, RTL931X_LED_PORT_FIB_SET_SEL_CTRL(i));
-		sw_w32_mask(0x3 << pos, 0, RTL931X_LED_PORT_COPR_SET_SEL_CTRL(i));
-
-		if (!priv->ports[i].phy)
-			continue;
-
-		v = 0x1; // Found on the EdgeCore, but we do not have any HW description
-		sw_w32_mask(0x3 << pos, v << pos, RTL931X_LED_PORT_NUM_CTRL(i));
-
-		if (priv->ports[i].phy_is_integrated)
-		pm_fiber |= BIT_ULL(i);
-			else
-		pm_copper |= BIT_ULL(i);
-
-		set = priv->ports[i].led_set;
-		sw_w32_mask(0, set << pos, RTL931X_LED_PORT_COPR_SET_SEL_CTRL(i));
-		sw_w32_mask(0, set << pos, RTL931X_LED_PORT_FIB_SET_SEL_CTRL(i));
-	}
-
-	for (i = 0; i < 4; i++) {
-		sprintf(set_name, "led_set%d", i);
-		pr_info(">%s<\n", set_name);
-		led_set = of_get_property(node, set_name, &setlen);
-		if (!led_set || setlen != 16)
-			break;
-		v = be32_to_cpup(led_set) << 16 | be32_to_cpup(led_set + 1);
-		sw_w32(v, RTL931X_LED_SET0_0_CTRL - 4 - i * 8);
-		v = be32_to_cpup(led_set + 2) << 16 | be32_to_cpup(led_set + 3);
-		sw_w32(v, RTL931X_LED_SET0_0_CTRL - i * 8);
-	}
-
-	// Set LED mode to serial (0x1)
-	sw_w32_mask(0x3, 0x1, RTL931X_LED_GLB_CTRL);
-
-	rtl839x_set_port_reg_le(pm_copper, RTL931X_LED_PORT_COPR_MASK_CTRL);
-	rtl839x_set_port_reg_le(pm_fiber, RTL931X_LED_PORT_FIB_MASK_CTRL);
-	rtl839x_set_port_reg_le(pm_copper | pm_fiber, RTL931X_LED_PORT_COMBO_MASK_CTRL);
-
-	for (i = 0; i < 32; i++)
-		pr_info("%s %08x: %08x\n",__func__, 0xbb000600 + i * 4, sw_r32(0x0600 + i * 4));
-
-}
-
-const struct rtl838x_reg rtl931x_reg = {
-	.mask_port_reg_be = rtl839x_mask_port_reg_be,
-	.set_port_reg_be = rtl839x_set_port_reg_be,
-	.get_port_reg_be = rtl839x_get_port_reg_be,
-	.mask_port_reg_le = rtl839x_mask_port_reg_le,
-	.set_port_reg_le = rtl839x_set_port_reg_le,
-	.get_port_reg_le = rtl839x_get_port_reg_le,
-	.stat_port_rst = RTL931X_STAT_PORT_RST,
-	.stat_rst = RTL931X_STAT_RST,
-	.stat_port_std_mib = 0,  // Not defined
-	.traffic_enable = rtl931x_traffic_enable,
-	.traffic_disable = rtl931x_traffic_disable,
-	.traffic_get = rtl931x_traffic_get,
-	.traffic_set = rtl931x_traffic_set,
-	.l2_ctrl_0 = RTL931X_L2_CTRL,
-	.l2_ctrl_1 = RTL931X_L2_AGE_CTRL,
-	.l2_port_aging_out = RTL931X_L2_PORT_AGE_CTRL,
-	.set_ageing_time = rtl931x_set_ageing_time,
-	// .smi_poll_ctrl does not exist
-	.l2_tbl_flush_ctrl = RTL931X_L2_TBL_FLUSH_CTRL,
-	.exec_tbl0_cmd = rtl931x_exec_tbl0_cmd,
-	.exec_tbl1_cmd = rtl931x_exec_tbl1_cmd,
-	.tbl_access_data_0 = rtl931x_tbl_access_data_0,
-	.isr_glb_src = RTL931X_ISR_GLB_SRC,
-	.isr_port_link_sts_chg = RTL931X_ISR_PORT_LINK_STS_CHG,
-	.imr_port_link_sts_chg = RTL931X_IMR_PORT_LINK_STS_CHG,
-	// imr_glb does not exist on RTL931X
-	.vlan_tables_read = rtl931x_vlan_tables_read,
-	.vlan_set_tagged = rtl931x_vlan_set_tagged,
-	.vlan_set_untagged = rtl931x_vlan_set_untagged,
-	.vlan_profile_dump = rtl931x_vlan_profile_dump,
-	.vlan_profile_setup = rtl931x_vlan_profile_setup,
-	.vlan_fwd_on_inner = rtl931x_vlan_fwd_on_inner,
-	.stp_get = rtl931x_stp_get,
-	.stp_set = rtl931x_stp_set,
-	.mac_force_mode_ctrl = rtl931x_mac_force_mode_ctrl,
-	.mac_port_ctrl = rtl931x_mac_port_ctrl,
-	.l2_port_new_salrn = rtl931x_l2_port_new_salrn,
-	.l2_port_new_sa_fwd = rtl931x_l2_port_new_sa_fwd,
-	.mir_ctrl = RTL931X_MIR_CTRL,
-	.mir_dpm = RTL931X_MIR_DPM_CTRL,
-	.mir_spm = RTL931X_MIR_SPM_CTRL,
-	.mac_link_sts = RTL931X_MAC_LINK_STS,
-	.mac_link_dup_sts = RTL931X_MAC_LINK_DUP_STS,
-	.mac_link_spd_sts = rtl931x_mac_link_spd_sts,
-	.mac_rx_pause_sts = RTL931X_MAC_RX_PAUSE_STS,
-	.mac_tx_pause_sts = RTL931X_MAC_TX_PAUSE_STS,
-	.read_l2_entry_using_hash = rtl931x_read_l2_entry_using_hash,
-	.write_l2_entry_using_hash = rtl931x_write_l2_entry_using_hash,
-	.read_cam = rtl931x_read_cam,
-	.write_cam = rtl931x_write_cam,
-	.vlan_port_keep_tag_set = rtl931x_vlan_port_keep_tag_set,
-	.vlan_port_pvidmode_set = rtl931x_vlan_port_pvidmode_set,
-	.vlan_port_pvid_set = rtl931x_vlan_port_pvid_set,
-	.trk_mbr_ctr = rtl931x_trk_mbr_ctr,
-	.set_vlan_igr_filter = rtl931x_set_igr_filter,
-	.set_vlan_egr_filter = rtl931x_set_egr_filter,
-	.set_distribution_algorithm = rtl931x_set_distribution_algorithm,
-	.l2_hash_key = rtl931x_l2_hash_key,
-	.read_mcast_pmask = rtl931x_read_mcast_pmask,
-	.write_mcast_pmask = rtl931x_write_mcast_pmask,
-	.pie_init = rtl931x_pie_init,
-	.pie_rule_write = rtl931x_pie_rule_write,
-	.pie_rule_add = rtl931x_pie_rule_add,
-	.pie_rule_rm = rtl931x_pie_rule_rm,
-	.l2_learning_setup = rtl931x_l2_learning_setup,
-	.l3_setup = rtl931x_l3_setup,
-	.led_init = rtl931x_led_init,
-};
-
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/tc.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/tc.c
deleted file mode 100644
index d0a8ee8cfe4b..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/tc.c
+++ /dev/null
@@ -1,409 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <net/dsa.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <net/flow_offload.h>
-#include <linux/rhashtable.h>
-
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-#include "rtl83xx.h"
-#include "rtl838x.h"
-
-/*
- * Parse the flow rule for the matching conditions
- */
-static int rtl83xx_parse_flow_rule(struct rtl838x_switch_priv *priv,
-			      struct flow_rule *rule, struct rtl83xx_flow *flow)
-{
-	struct flow_dissector *dissector = rule->match.dissector;
-
-	pr_debug("In %s\n", __func__);
-	/* KEY_CONTROL and KEY_BASIC are needed for forming a meaningful key */
-	if ((dissector->used_keys & BIT(FLOW_DISSECTOR_KEY_CONTROL)) == 0 ||
-	    (dissector->used_keys & BIT(FLOW_DISSECTOR_KEY_BASIC)) == 0) {
-		pr_err("Cannot form TC key: used_keys = 0x%x\n", dissector->used_keys);
-		return -EOPNOTSUPP;
-	}
-
-	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC)) {
-		struct flow_match_basic match;
-
-		pr_debug("%s: BASIC\n", __func__);
-		flow_rule_match_basic(rule, &match);
-		if (match.key->n_proto == htons(ETH_P_ARP))
-			flow->rule.frame_type = 0;
-		if (match.key->n_proto == htons(ETH_P_IP))
-			flow->rule.frame_type = 2;
-		if (match.key->n_proto == htons(ETH_P_IPV6))
-			flow->rule.frame_type = 3;
-		if ((match.key->n_proto == htons(ETH_P_ARP)) || flow->rule.frame_type)
-			flow->rule.frame_type_m = 3;
-		if (flow->rule.frame_type >= 2) {
-			if (match.key->ip_proto == IPPROTO_UDP)
-				flow->rule.frame_type_l4 = 0;
-			if (match.key->ip_proto == IPPROTO_TCP)
-				flow->rule.frame_type_l4 = 1;
-			if (match.key->ip_proto == IPPROTO_ICMP
-				|| match.key->ip_proto ==IPPROTO_ICMPV6)
-				flow->rule.frame_type_l4 = 2;
-			if (match.key->ip_proto == IPPROTO_TCP)
-				flow->rule.frame_type_l4 = 3;
-			if ((match.key->ip_proto == IPPROTO_UDP) || flow->rule.frame_type_l4)
-				flow->rule.frame_type_l4_m = 7;
-		}
-	}
-
-	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
-		struct flow_match_eth_addrs match;
-
-		pr_debug("%s: ETH_ADDR\n", __func__);
-		flow_rule_match_eth_addrs(rule, &match);
-		ether_addr_copy(flow->rule.dmac, match.key->dst);
-		ether_addr_copy(flow->rule.dmac_m, match.mask->dst);
-		ether_addr_copy(flow->rule.smac, match.key->src);
-		ether_addr_copy(flow->rule.smac_m, match.mask->src);
-	}
-
-	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_VLAN)) {
-		struct flow_match_vlan match;
-
-		pr_debug("%s: VLAN\n", __func__);
-		flow_rule_match_vlan(rule, &match);
-		flow->rule.itag = match.key->vlan_id;
-		flow->rule.itag_m = match.mask->vlan_id;
-		// TODO: What about match.key->vlan_priority ?
-	}
-
-	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IPV4_ADDRS)) {
-		struct flow_match_ipv4_addrs match;
-
-		pr_debug("%s: IPV4\n", __func__);
-		flow_rule_match_ipv4_addrs(rule, &match);
-		flow->rule.is_ipv6 = false;
-		flow->rule.dip = match.key->dst;
-		flow->rule.dip_m = match.mask->dst;
-		flow->rule.sip = match.key->src;
-		flow->rule.sip_m = match.mask->src;
-	} else if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IPV6_ADDRS)) {
-		struct flow_match_ipv6_addrs match;
-
-		pr_debug("%s: IPV6\n", __func__);
-		flow->rule.is_ipv6 = true;
-		flow_rule_match_ipv6_addrs(rule, &match);
-		flow->rule.dip6 = match.key->dst;
-		flow->rule.dip6_m = match.mask->dst;
-		flow->rule.sip6 = match.key->src;
-		flow->rule.sip6_m = match.mask->src;
-	}
-
-	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_PORTS)) {
-		struct flow_match_ports match;
-
-		pr_debug("%s: PORTS\n", __func__);
-		flow_rule_match_ports(rule, &match);
-		flow->rule.dport = match.key->dst;
-		flow->rule.dport_m = match.mask->dst;
-		flow->rule.sport = match.key->src;
-		flow->rule.sport_m = match.mask->src;
-	}
-
-	// TODO: ICMP
-	return 0;
-}
-
-static void rtl83xx_flow_bypass_all(struct rtl83xx_flow *flow)
-{
-	flow->rule.bypass_sel = true;
-	flow->rule.bypass_all = true;
-	flow->rule.bypass_igr_stp = true;
-	flow->rule.bypass_ibc_sc = true;
-}
-
-static int rtl83xx_parse_fwd(struct rtl838x_switch_priv *priv,
-			     const struct flow_action_entry *act, struct rtl83xx_flow *flow)
-{
-	struct net_device *dev = act->dev;
-	int port;
-
-	port = rtl83xx_port_is_under(dev, priv);
-	if (port < 0) {
-		netdev_info(dev, "%s: not a DSA device.\n", __func__);
-		return -EINVAL;
-	}
-
-	flow->rule.fwd_sel = true;
-	flow->rule.fwd_data = port;
-	pr_debug("Using port index: %d\n", port);
-	rtl83xx_flow_bypass_all(flow);
-
-	return 0;
-}
-
-static int rtl83xx_add_flow(struct rtl838x_switch_priv *priv, struct flow_cls_offload *f,
-			    struct rtl83xx_flow *flow)
-{
-	struct flow_rule *rule = flow_cls_offload_flow_rule(f);
-	const struct flow_action_entry *act;
-	int i, err;
-
-	pr_debug("%s\n", __func__);
-
-	rtl83xx_parse_flow_rule(priv, rule, flow);
-	
-	flow_action_for_each(i, act, &rule->action) {
-		switch (act->id) {
-		case FLOW_ACTION_DROP:
-			pr_debug("%s: DROP\n", __func__);
-			flow->rule.drop = true;
-			rtl83xx_flow_bypass_all(flow);
-			return 0;
-
-		case FLOW_ACTION_TRAP:
-			pr_debug("%s: TRAP\n", __func__);
-			flow->rule.fwd_data = priv->cpu_port;
-			flow->rule.fwd_act = PIE_ACT_REDIRECT_TO_PORT;
-			rtl83xx_flow_bypass_all(flow);
-			break;
-
-		case FLOW_ACTION_MANGLE:
-			pr_err("%s: FLOW_ACTION_MANGLE not supported\n", __func__);
-			return -EOPNOTSUPP;
-
-		case FLOW_ACTION_ADD:
-			pr_err("%s: FLOW_ACTION_ADD not supported\n", __func__);
-			return -EOPNOTSUPP;
-
-		case FLOW_ACTION_VLAN_PUSH:
-			pr_debug("%s: VLAN_PUSH\n", __func__);
-//			TODO: act->vlan.proto
-			flow->rule.ivid_act = PIE_ACT_VID_ASSIGN;
-			flow->rule.ivid_sel = true;
-			flow->rule.ivid_data = htons(act->vlan.vid);
-			flow->rule.ovid_act = PIE_ACT_VID_ASSIGN;
-			flow->rule.ovid_sel = true;
-			flow->rule.ovid_data = htons(act->vlan.vid);
-			flow->rule.fwd_mod_to_cpu = true;
-			break;
-
-		case FLOW_ACTION_VLAN_POP:
-			pr_debug("%s: VLAN_POP\n", __func__);
-			flow->rule.ivid_act = PIE_ACT_VID_ASSIGN;
-			flow->rule.ivid_data = 0;
-			flow->rule.ivid_sel = true;
-			flow->rule.ovid_act = PIE_ACT_VID_ASSIGN;
-			flow->rule.ovid_data = 0;
-			flow->rule.ovid_sel = true;
-			flow->rule.fwd_mod_to_cpu = true;
-			break;
-
-		case FLOW_ACTION_CSUM:
-			pr_err("%s: FLOW_ACTION_CSUM not supported\n", __func__);
-			return -EOPNOTSUPP;
-
-		case FLOW_ACTION_REDIRECT:
-			pr_debug("%s: REDIRECT\n", __func__);
-			err = rtl83xx_parse_fwd(priv, act, flow);
-			if (err)
-				return err;
-			flow->rule.fwd_act = PIE_ACT_REDIRECT_TO_PORT;
-			break;
-
-		case FLOW_ACTION_MIRRED:
-			pr_debug("%s: MIRRED\n", __func__);
-			err = rtl83xx_parse_fwd(priv, act, flow);
-			if (err)
-				return err;
-			flow->rule.fwd_act = PIE_ACT_COPY_TO_PORT;
-			break;
-
-		default:
-			pr_err("%s: Flow action not supported: %d\n", __func__, act->id);
-			return -EOPNOTSUPP;
-		}
-	}
-
-	return 0;
-}
-
-static const struct rhashtable_params tc_ht_params = {
-	.head_offset = offsetof(struct rtl83xx_flow, node),
-	.key_offset = offsetof(struct rtl83xx_flow, cookie),
-	.key_len = sizeof(((struct rtl83xx_flow *)0)->cookie),
-	.automatic_shrinking = true,
-};
-
-static int rtl83xx_configure_flower(struct rtl838x_switch_priv *priv,
-				    struct flow_cls_offload *f)
-{
-	struct rtl83xx_flow *flow;
-	int err = 0;
-
-	pr_debug("In %s\n", __func__);
-
-	rcu_read_lock();
-	pr_debug("Cookie %08lx\n", f->cookie);
-	flow = rhashtable_lookup(&priv->tc_ht, &f->cookie, tc_ht_params);
-	if (flow) {
-		pr_info("%s: Got flow\n", __func__);
-		err = -EEXIST;
-		goto rcu_unlock;
-	}
-
-rcu_unlock:
-	rcu_read_unlock();
-	if (flow)
-		goto out;
-	pr_debug("%s: New flow\n", __func__);
-
-	flow = kzalloc(sizeof(*flow), GFP_KERNEL);
-	if (!flow) {
-		err = -ENOMEM;
-		goto out;
-	}
-
-	flow->cookie = f->cookie;
-	flow->priv = priv;
-
-	err = rhashtable_insert_fast(&priv->tc_ht, &flow->node, tc_ht_params);
-	if (err) {
-		pr_err("Could not insert add new rule\n");
-		goto out_free;
-	}
-
-	rtl83xx_add_flow(priv, f, flow); // TODO: check error
-
-	// Add log action to flow
-	flow->rule.packet_cntr = rtl83xx_packet_cntr_alloc(priv);
-	if (flow->rule.packet_cntr >= 0) {
-		pr_debug("Using packet counter %d\n", flow->rule.packet_cntr);
-		flow->rule.log_sel = true;
-		flow->rule.log_data = flow->rule.packet_cntr;
-	}
-
-	err = priv->r->pie_rule_add(priv, &flow->rule);
-	return err;
-
-out_free:
-	kfree(flow);
-out:
-	pr_err("%s: error %d\n", __func__, err);
-	return err;
-}
-
-static int rtl83xx_delete_flower(struct rtl838x_switch_priv *priv,
-				 struct flow_cls_offload * cls_flower)
-{
-	struct rtl83xx_flow *flow;
-
-	pr_debug("In %s\n", __func__);
-	rcu_read_lock();
-	flow = rhashtable_lookup_fast(&priv->tc_ht, &cls_flower->cookie, tc_ht_params);
-	if (!flow) {
-		rcu_read_unlock();
-		return -EINVAL;
-	}
-
-	priv->r->pie_rule_rm(priv, &flow->rule);
-
-	rhashtable_remove_fast(&priv->tc_ht, &flow->node, tc_ht_params);
-
-	kfree_rcu(flow, rcu_head);
-
-	rcu_read_unlock();
-	return 0;
-}
-
-static int rtl83xx_stats_flower(struct rtl838x_switch_priv *priv,
-				struct flow_cls_offload * cls_flower)
-{
-	struct rtl83xx_flow *flow;
-	unsigned long lastused = 0;
-	int total_packets, new_packets;
-
-	pr_debug("%s: \n", __func__);
-	flow = rhashtable_lookup_fast(&priv->tc_ht, &cls_flower->cookie, tc_ht_params);
-	if (!flow)
-		return -1;
-
-	if (flow->rule.packet_cntr >= 0) {
-		total_packets = priv->r->packet_cntr_read(flow->rule.packet_cntr);
-		pr_debug("Total packets: %d\n", total_packets);
-		new_packets = total_packets - flow->rule.last_packet_cnt;
-		flow->rule.last_packet_cnt = total_packets;
-	}
-
-	// TODO: We need a second PIE rule to count the bytes
-	flow_stats_update(&cls_flower->stats, 100 * new_packets, new_packets, 0, lastused,
-			  FLOW_ACTION_HW_STATS_IMMEDIATE);
-	return 0;
-}
-
-static int rtl83xx_setup_tc_cls_flower(struct rtl838x_switch_priv *priv,
-				       struct flow_cls_offload *cls_flower)
-{
-	pr_debug("%s: %d\n", __func__, cls_flower->command);
-	switch (cls_flower->command) {
-	case FLOW_CLS_REPLACE:
-		return rtl83xx_configure_flower(priv, cls_flower);
-	case FLOW_CLS_DESTROY:
-		return rtl83xx_delete_flower(priv, cls_flower);
-	case FLOW_CLS_STATS:
-		return rtl83xx_stats_flower(priv, cls_flower);
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-
-static int rtl83xx_setup_tc_block_cb(enum tc_setup_type type, void *type_data,
-				     void *cb_priv)
-{
-	struct rtl838x_switch_priv *priv = cb_priv;
-
-	switch (type) {
-	case TC_SETUP_CLSFLOWER:
-		pr_debug("%s: TC_SETUP_CLSFLOWER\n", __func__);
-		return rtl83xx_setup_tc_cls_flower(priv, type_data);
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-static LIST_HEAD(rtl83xx_block_cb_list);
-
-int rtl83xx_setup_tc(struct net_device *dev, enum tc_setup_type type, void *type_data)
-{
-	struct rtl838x_switch_priv *priv;
-	struct flow_block_offload *f = type_data;
-	static bool first_time = true;
-	int err;
-
-	pr_debug("%s: %d\n", __func__, type);
-
-	if(!netdev_uses_dsa(dev)) {
-		pr_err("%s: no DSA\n", __func__);
-		return 0;
-	}
-	priv = dev->dsa_ptr->ds->priv;
-
-	switch (type) {
-	case TC_SETUP_BLOCK:
-		if (first_time) {
-			first_time = false;
-			err = rhashtable_init(&priv->tc_ht, &tc_ht_params);
-			if (err)
-				pr_err("%s: Could not initialize hash table\n", __func__);
-		}
-
-		f->unlocked_driver_cb = true;
-		return flow_block_cb_setup_simple(type_data,
-						  &rtl83xx_block_cb_list,
-						  rtl83xx_setup_tc_block_cb,
-						  priv, priv, true);
-	default:
-		return -EOPNOTSUPP;
-	}
-
-	return 0;
-}
diff --git a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
deleted file mode 100644
index 16a846c8d7f3..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
+++ /dev/null
@@ -1,2588 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/net/ethernet/rtl838x_eth.c
- * Copyright (C) 2020 B. Koblitz
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/etherdevice.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_net.h>
-#include <linux/of_mdio.h>
-#include <linux/module.h>
-#include <linux/phylink.h>
-#include <linux/pkt_sched.h>
-#include <net/dsa.h>
-#include <net/switchdev.h>
-#include <asm/cacheflush.h>
-
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-#include "rtl838x_eth.h"
-
-extern struct rtl83xx_soc_info soc_info;
-
-/*
- * Maximum number of RX rings is 8 on RTL83XX and 32 on the 93XX
- * The ring is assigned by switch based on packet/port priortity
- * Maximum number of TX rings is 2, Ring 2 being the high priority
- * ring on the RTL93xx SoCs. MAX_RXLEN gives the maximum length
- * for an RX ring, MAX_ENTRIES the maximum number of entries
- * available in total for all queues.
- */
-#define MAX_RXRINGS	32
-#define MAX_RXLEN	300
-#define MAX_ENTRIES	(300 * 8)
-#define TXRINGS		2
-#define TXRINGLEN	160
-#define NOTIFY_EVENTS	10
-#define NOTIFY_BLOCKS	10
-#define TX_EN		0x8
-#define RX_EN		0x4
-#define TX_EN_93XX	0x20
-#define RX_EN_93XX	0x10
-#define TX_DO		0x2
-#define WRAP		0x2
-#define MAX_PORTS	57
-#define MAX_SMI_BUSSES	4
-
-#define RING_BUFFER	1600
-
-struct p_hdr {
-	uint8_t		*buf;
-	uint16_t	reserved;
-	uint16_t	size;		/* buffer size */
-	uint16_t	offset;
-	uint16_t	len;		/* pkt len */
-	/* cpu_tag[0] is a reserved uint16_t on RTL83xx */
-	uint16_t	cpu_tag[10];
-} __packed __aligned(1);
-
-struct n_event {
-	uint32_t	type:2;
-	uint32_t	fidVid:12;
-	uint64_t	mac:48;
-	uint32_t	slp:6;
-	uint32_t	valid:1;
-	uint32_t	reserved:27;
-} __packed __aligned(1);
-
-struct ring_b {
-	uint32_t	rx_r[MAX_RXRINGS][MAX_RXLEN];
-	uint32_t	tx_r[TXRINGS][TXRINGLEN];
-	struct	p_hdr	rx_header[MAX_RXRINGS][MAX_RXLEN];
-	struct	p_hdr	tx_header[TXRINGS][TXRINGLEN];
-	uint32_t	c_rx[MAX_RXRINGS];
-	uint32_t	c_tx[TXRINGS];
-	uint8_t		tx_space[TXRINGS * TXRINGLEN * RING_BUFFER];
-	uint8_t		*rx_space;
-};
-
-struct notify_block {
-	struct n_event	events[NOTIFY_EVENTS];
-};
-
-struct notify_b {
-	struct notify_block	blocks[NOTIFY_BLOCKS];
-	u32			reserved1[8];
-	u32			ring[NOTIFY_BLOCKS];
-	u32			reserved2[8];
-};
-
-static void rtl838x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio)
-{
-	// cpu_tag[0] is reserved on the RTL83XX SoCs
-	h->cpu_tag[1] = 0x0400;  // BIT 10: RTL8380_CPU_TAG
-	h->cpu_tag[2] = 0x0200;  // Set only AS_DPM, to enable DPM settings below
-	h->cpu_tag[3] = 0x0000;
-	h->cpu_tag[4] = BIT(dest_port) >> 16;
-	h->cpu_tag[5] = BIT(dest_port) & 0xffff;
-
-	/* Set internal priority (PRI) and enable (AS_PRI) */
-	if (prio >= 0)
-		h->cpu_tag[2] |= ((prio & 0x7) | BIT(3)) << 12;
-}
-
-static void rtl839x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio)
-{
-	// cpu_tag[0] is reserved on the RTL83XX SoCs
-	h->cpu_tag[1] = 0x0100; // RTL8390_CPU_TAG marker
-	h->cpu_tag[2] = BIT(4); /* AS_DPM flag */
-	h->cpu_tag[3] = h->cpu_tag[4] = h->cpu_tag[5] = 0;
-	// h->cpu_tag[1] |= BIT(1) | BIT(0); // Bypass filter 1/2
-	if (dest_port >= 32) {
-		dest_port -= 32;
-		h->cpu_tag[2] |= (BIT(dest_port) >> 16) & 0xf;
-		h->cpu_tag[3] = BIT(dest_port) & 0xffff;
-	} else {
-		h->cpu_tag[4] = BIT(dest_port) >> 16;
-		h->cpu_tag[5] = BIT(dest_port) & 0xffff;
-	}
-
-	/* Set internal priority (PRI) and enable (AS_PRI) */
-	if (prio >= 0)
-		h->cpu_tag[2] |= ((prio & 0x7) | BIT(3)) << 8;
-}
-
-static void rtl930x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio)
-{
-	h->cpu_tag[0] = 0x8000;  // CPU tag marker
-	h->cpu_tag[1] = h->cpu_tag[2] = 0;
-	h->cpu_tag[3] = 0;
-	h->cpu_tag[4] = 0;
-	h->cpu_tag[5] = 0;
-	h->cpu_tag[6] = BIT(dest_port) >> 16;
-	h->cpu_tag[7] = BIT(dest_port) & 0xffff;
-
-	/* Enable (AS_QID) and set priority queue (QID) */
-	if (prio >= 0)
-		h->cpu_tag[2] = (BIT(5) | (prio & 0x1f)) << 8;
-}
-
-static void rtl931x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio)
-{
-	h->cpu_tag[0] = 0x8000;  // CPU tag marker
-	h->cpu_tag[1] = h->cpu_tag[2] = 0;
-	h->cpu_tag[3] = 0;
-	h->cpu_tag[4] = h->cpu_tag[5] = h->cpu_tag[6] = h->cpu_tag[7] = 0;
-	if (dest_port >= 32) {
-		dest_port -= 32;
-		h->cpu_tag[4] = BIT(dest_port) >> 16;
-		h->cpu_tag[5] = BIT(dest_port) & 0xffff;
-	} else {
-		h->cpu_tag[6] = BIT(dest_port) >> 16;
-		h->cpu_tag[7] = BIT(dest_port) & 0xffff;
-	}
-
-	/* Enable (AS_QID) and set priority queue (QID) */
-	if (prio >= 0)
-		h->cpu_tag[2] = (BIT(5) | (prio & 0x1f)) << 8;
-}
-
-static void rtl93xx_header_vlan_set(struct p_hdr *h, int vlan)
-{
-	h->cpu_tag[2] |= BIT(4); // Enable VLAN forwarding offload
-	h->cpu_tag[2] |= (vlan >> 8) & 0xf;
-	h->cpu_tag[3] |= (vlan & 0xff) << 8;
-}
-
-struct rtl838x_rx_q {
-	int id;
-	struct rtl838x_eth_priv *priv;
-	struct napi_struct napi;
-};
-
-struct rtl838x_eth_priv {
-	struct net_device *netdev;
-	struct platform_device *pdev;
-	void		*membase;
-	spinlock_t	lock;
-	struct mii_bus	*mii_bus;
-	struct rtl838x_rx_q rx_qs[MAX_RXRINGS];
-	struct phylink *phylink;
-	struct phylink_config phylink_config;
-	u16 id;
-	u16 family_id;
-	const struct rtl838x_eth_reg *r;
-	u8 cpu_port;
-	u32 lastEvent;
-	u16 rxrings;
-	u16 rxringlen;
-	u8 smi_bus[MAX_PORTS];
-	u8 smi_addr[MAX_PORTS];
-	u32 sds_id[MAX_PORTS];
-	bool smi_bus_isc45[MAX_SMI_BUSSES];
-	bool phy_is_internal[MAX_PORTS];
-	phy_interface_t interfaces[MAX_PORTS];
-};
-
-extern int rtl838x_phy_init(struct rtl838x_eth_priv *priv);
-extern int rtl838x_read_sds_phy(int phy_addr, int phy_reg);
-extern int rtl839x_read_sds_phy(int phy_addr, int phy_reg);
-extern int rtl839x_write_sds_phy(int phy_addr, int phy_reg, u16 v);
-extern int rtl930x_read_sds_phy(int phy_addr, int page, int phy_reg);
-extern int rtl930x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v);
-extern int rtl931x_read_sds_phy(int phy_addr, int page, int phy_reg);
-extern int rtl931x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v);
-extern int rtl930x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val);
-extern int rtl930x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val);
-extern int rtl931x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val);
-extern int rtl931x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val);
-
-/*
- * On the RTL93XX, the RTL93XX_DMA_IF_RX_RING_CNTR track the fill level of 
- * the rings. Writing x into these registers substracts x from its content.
- * When the content reaches the ring size, the ASIC no longer adds
- * packets to this receive queue.
- */
-void rtl838x_update_cntr(int r, int released)
-{
-	// This feature is not available on RTL838x SoCs
-}
-
-void rtl839x_update_cntr(int r, int released)
-{
-	// This feature is not available on RTL839x SoCs
-}
-
-void rtl930x_update_cntr(int r, int released)
-{
-	int pos = (r % 3) * 10;
-	u32 reg = RTL930X_DMA_IF_RX_RING_CNTR + ((r / 3) << 2);
-	u32 v = sw_r32(reg);
-
-	v = (v >> pos) & 0x3ff;
-	pr_debug("RX: Work done %d, old value: %d, pos %d, reg %04x\n", released, v, pos, reg);
-	sw_w32_mask(0x3ff << pos, released << pos, reg);
-	sw_w32(v, reg);
-}
-
-void rtl931x_update_cntr(int r, int released)
-{
-	int pos = (r % 3) * 10;
-	u32 reg = RTL931X_DMA_IF_RX_RING_CNTR + ((r / 3) << 2);
-	u32 v = sw_r32(reg);
-
-	v = (v >> pos) & 0x3ff;
-	sw_w32_mask(0x3ff << pos, released << pos, reg);
-	sw_w32(v, reg);
-}
-
-struct dsa_tag {
-	u8	reason;
-	u8	queue;
-	u16	port;
-	u8	l2_offloaded;
-	u8	prio;
-	bool	crc_error;
-};
-
-bool rtl838x_decode_tag(struct p_hdr *h, struct dsa_tag *t)
-{
-	/* cpu_tag[0] is reserved. Fields are off-by-one */
-	t->reason = h->cpu_tag[4] & 0xf;
-	t->queue = (h->cpu_tag[1] & 0xe0) >> 5;
-	t->port = h->cpu_tag[1] & 0x1f;
-	t->crc_error = t->reason == 13;
-
-	pr_debug("Reason: %d\n", t->reason);
-	if (t->reason != 6) // NIC_RX_REASON_SPECIAL_TRAP
-		t->l2_offloaded = 1;
-	else
-		t->l2_offloaded = 0;
-
-	return t->l2_offloaded;
-}
-
-bool rtl839x_decode_tag(struct p_hdr *h, struct dsa_tag *t)
-{
-	/* cpu_tag[0] is reserved. Fields are off-by-one */
-	t->reason = h->cpu_tag[5] & 0x1f;
-	t->queue = (h->cpu_tag[4] & 0xe000) >> 13;
-	t->port = h->cpu_tag[1] & 0x3f;
-	t->crc_error = h->cpu_tag[4] & BIT(6);
-
-	pr_debug("Reason: %d\n", t->reason);
-	if ((t->reason >= 7 && t->reason <= 13) || // NIC_RX_REASON_RMA
-	    (t->reason >= 23 && t->reason <= 25))  // NIC_RX_REASON_SPECIAL_TRAP
-		t->l2_offloaded = 0;
-	else
-		t->l2_offloaded = 1;
-
-	return t->l2_offloaded;
-}
-
-bool rtl930x_decode_tag(struct p_hdr *h, struct dsa_tag *t)
-{
-	t->reason = h->cpu_tag[7] & 0x3f;
-	t->queue =  (h->cpu_tag[2] >> 11) & 0x1f;
-	t->port = (h->cpu_tag[0] >> 8) & 0x1f;
-	t->crc_error = h->cpu_tag[1] & BIT(6);
-
-	pr_debug("Reason %d, port %d, queue %d\n", t->reason, t->port, t->queue);
-	if (t->reason >= 19 && t->reason <= 27)
-		t->l2_offloaded = 0;
-	else
-		t->l2_offloaded = 1;
-
-	return t->l2_offloaded;
-}
-
-bool rtl931x_decode_tag(struct p_hdr *h, struct dsa_tag *t)
-{
-	t->reason = h->cpu_tag[7] & 0x3f;
-	t->queue =  (h->cpu_tag[2] >> 11) & 0x1f;
-	t->port = (h->cpu_tag[0] >> 8) & 0x3f;
-	t->crc_error = h->cpu_tag[1] & BIT(6);
-
-	if (t->reason != 63)
-		pr_info("%s: Reason %d, port %d, queue %d\n", __func__, t->reason, t->port, t->queue);
-	if (t->reason >= 19 && t->reason <= 27)	// NIC_RX_REASON_RMA
-		t->l2_offloaded = 0;
-	else
-		t->l2_offloaded = 1;
-
-	return t->l2_offloaded;
-}
-
-/*
- * Discard the RX ring-buffers, called as part of the net-ISR
- * when the buffer runs over
- */
-static void rtl838x_rb_cleanup(struct rtl838x_eth_priv *priv, int status)
-{
-	int r;
-	u32	*last;
-	struct p_hdr *h;
-	struct ring_b *ring = priv->membase;
-
-	for (r = 0; r < priv->rxrings; r++) {
-		pr_debug("In %s working on r: %d\n", __func__, r);
-		last = (u32 *)KSEG1ADDR(sw_r32(priv->r->dma_if_rx_cur + r * 4));
-		do {
-			if ((ring->rx_r[r][ring->c_rx[r]] & 0x1))
-				break;
-			pr_debug("Got something: %d\n", ring->c_rx[r]);
-			h = &ring->rx_header[r][ring->c_rx[r]];
-			memset(h, 0, sizeof(struct p_hdr));
-			h->buf = (u8 *)KSEG1ADDR(ring->rx_space
-					+ r * priv->rxringlen * RING_BUFFER
-					+ ring->c_rx[r] * RING_BUFFER);
-			h->size = RING_BUFFER;
-			/* make sure the header is visible to the ASIC */
-			mb();
-
-			ring->rx_r[r][ring->c_rx[r]] = KSEG1ADDR(h) | 0x1
-				| (ring->c_rx[r] == (priv->rxringlen - 1) ? WRAP : 0x1);
-			ring->c_rx[r] = (ring->c_rx[r] + 1) % priv->rxringlen;
-		} while (&ring->rx_r[r][ring->c_rx[r]] != last);
-	}
-}
-
-struct fdb_update_work {
-	struct work_struct work;
-	struct net_device *ndev;
-	u64 macs[NOTIFY_EVENTS + 1];
-};
-
-void rtl838x_fdb_sync(struct work_struct *work)
-{
-	const struct fdb_update_work *uw =
-		container_of(work, struct fdb_update_work, work);
-	struct switchdev_notifier_fdb_info info;
-	u8 addr[ETH_ALEN];
-	int i = 0;
-	int action;
-
-	while (uw->macs[i]) {
-		action = (uw->macs[i] & (1ULL << 63)) ? SWITCHDEV_FDB_ADD_TO_BRIDGE
-				: SWITCHDEV_FDB_DEL_TO_BRIDGE;
-		u64_to_ether_addr(uw->macs[i] & 0xffffffffffffULL, addr);
-		info.addr = &addr[0];
-		info.vid = 0;
-		info.offloaded = 1;
-		pr_debug("FDB entry %d: %llx, action %d\n", i, uw->macs[0], action);
-		call_switchdev_notifiers(action, uw->ndev, &info.info, NULL);
-		i++;
-	}
-	kfree(work);
-}
-
-static void rtl839x_l2_notification_handler(struct rtl838x_eth_priv *priv)
-{
-	struct notify_b *nb = priv->membase + sizeof(struct ring_b);
-	u32 e = priv->lastEvent;
-	struct n_event *event;
-	int i;
-	u64 mac;
-	struct fdb_update_work *w;
-
-	while (!(nb->ring[e] & 1)) {
-		w = kzalloc(sizeof(*w), GFP_ATOMIC);
-		if (!w) {
-			pr_err("Out of memory: %s", __func__);
-			return;
-		}
-		INIT_WORK(&w->work, rtl838x_fdb_sync);
-
-		for (i = 0; i < NOTIFY_EVENTS; i++) {
-			event = &nb->blocks[e].events[i];
-			if (!event->valid)
-				continue;
-			mac = event->mac;
-			if (event->type)
-				mac |= 1ULL << 63;
-			w->ndev = priv->netdev;
-			w->macs[i] = mac;
-		}
-
-		/* Hand the ring entry back to the switch */
-		nb->ring[e] = nb->ring[e] | 1;
-		e = (e + 1) % NOTIFY_BLOCKS;
-
-		w->macs[i] = 0ULL;
-		schedule_work(&w->work);
-	}
-	priv->lastEvent = e;
-}
-
-static irqreturn_t rtl83xx_net_irq(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-	u32 status = sw_r32(priv->r->dma_if_intr_sts);
-	int i;
-
-	pr_debug("IRQ: %08x\n", status);
-
-	/*  Ignore TX interrupt */
-	if ((status & 0xf0000)) {
-		/* Clear ISR */
-		sw_w32(0x000f0000, priv->r->dma_if_intr_sts);
-	}
-
-	/* RX interrupt */
-	if (status & 0x0ff00) {
-		/* ACK and disable RX interrupt for this ring */
-		sw_w32_mask(0xff00 & status, 0, priv->r->dma_if_intr_msk);
-		sw_w32(0x0000ff00 & status, priv->r->dma_if_intr_sts);
-		for (i = 0; i < priv->rxrings; i++) {
-			if (status & BIT(i + 8)) {
-				pr_debug("Scheduling queue: %d\n", i);
-				napi_schedule(&priv->rx_qs[i].napi);
-			}
-		}
-	}
-
-	/* RX buffer overrun */
-	if (status & 0x000ff) {
-		pr_debug("RX buffer overrun: status %x, mask: %x\n",
-			 status, sw_r32(priv->r->dma_if_intr_msk));
-		sw_w32(status, priv->r->dma_if_intr_sts);
-		rtl838x_rb_cleanup(priv, status & 0xff);
-	}
-
-	if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00100000) {
-		sw_w32(0x00100000, priv->r->dma_if_intr_sts);
-		rtl839x_l2_notification_handler(priv);
-	}
-
-	if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00200000) {
-		sw_w32(0x00200000, priv->r->dma_if_intr_sts);
-		rtl839x_l2_notification_handler(priv);
-	}
-
-	if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00400000) {
-		sw_w32(0x00400000, priv->r->dma_if_intr_sts);
-		rtl839x_l2_notification_handler(priv);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t rtl93xx_net_irq(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-	u32 status_rx_r = sw_r32(priv->r->dma_if_intr_rx_runout_sts);
-	u32 status_rx = sw_r32(priv->r->dma_if_intr_rx_done_sts);
-	u32 status_tx = sw_r32(priv->r->dma_if_intr_tx_done_sts);
-	int i;
-
-	pr_debug("In %s, status_tx: %08x, status_rx: %08x, status_rx_r: %08x\n",
-		__func__, status_tx, status_rx, status_rx_r);
-
-	/*  Ignore TX interrupt */
-	if (status_tx) {
-		/* Clear ISR */
-		pr_debug("TX done\n");
-		sw_w32(status_tx, priv->r->dma_if_intr_tx_done_sts);
-	}
-
-	/* RX interrupt */
-	if (status_rx) {
-		pr_debug("RX IRQ\n");
-		/* ACK and disable RX interrupt for given rings */
-		sw_w32(status_rx, priv->r->dma_if_intr_rx_done_sts);
-		sw_w32_mask(status_rx, 0, priv->r->dma_if_intr_rx_done_msk);
-		for (i = 0; i < priv->rxrings; i++) {
-			if (status_rx & BIT(i)) {
-				pr_debug("Scheduling queue: %d\n", i);
-				napi_schedule(&priv->rx_qs[i].napi);
-			}
-		}
-	}
-
-	/* RX buffer overrun */
-	if (status_rx_r) {
-		pr_debug("RX buffer overrun: status %x, mask: %x\n",
-			 status_rx_r, sw_r32(priv->r->dma_if_intr_rx_runout_msk));
-		sw_w32(status_rx_r, priv->r->dma_if_intr_rx_runout_sts);
-		rtl838x_rb_cleanup(priv, status_rx_r);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static const struct rtl838x_eth_reg rtl838x_reg = {
-	.net_irq = rtl83xx_net_irq,
-	.mac_port_ctrl = rtl838x_mac_port_ctrl,
-	.dma_if_intr_sts = RTL838X_DMA_IF_INTR_STS,
-	.dma_if_intr_msk = RTL838X_DMA_IF_INTR_MSK,
-	.dma_if_ctrl = RTL838X_DMA_IF_CTRL,
-	.mac_force_mode_ctrl = RTL838X_MAC_FORCE_MODE_CTRL,
-	.dma_rx_base = RTL838X_DMA_RX_BASE,
-	.dma_tx_base = RTL838X_DMA_TX_BASE,
-	.dma_if_rx_ring_size = rtl838x_dma_if_rx_ring_size,
-	.dma_if_rx_ring_cntr = rtl838x_dma_if_rx_ring_cntr,
-	.dma_if_rx_cur = RTL838X_DMA_IF_RX_CUR,
-	.rst_glb_ctrl = RTL838X_RST_GLB_CTRL_0,
-	.get_mac_link_sts = rtl838x_get_mac_link_sts,
-	.get_mac_link_dup_sts = rtl838x_get_mac_link_dup_sts,
-	.get_mac_link_spd_sts = rtl838x_get_mac_link_spd_sts,
-	.get_mac_rx_pause_sts = rtl838x_get_mac_rx_pause_sts,
-	.get_mac_tx_pause_sts = rtl838x_get_mac_tx_pause_sts,
-	.mac = RTL838X_MAC,
-	.l2_tbl_flush_ctrl = RTL838X_L2_TBL_FLUSH_CTRL,
-	.update_cntr = rtl838x_update_cntr,
-	.create_tx_header = rtl838x_create_tx_header,
-	.decode_tag = rtl838x_decode_tag,
-};
-
-static const struct rtl838x_eth_reg rtl839x_reg = {
-	.net_irq = rtl83xx_net_irq,
-	.mac_port_ctrl = rtl839x_mac_port_ctrl,
-	.dma_if_intr_sts = RTL839X_DMA_IF_INTR_STS,
-	.dma_if_intr_msk = RTL839X_DMA_IF_INTR_MSK,
-	.dma_if_ctrl = RTL839X_DMA_IF_CTRL,
-	.mac_force_mode_ctrl = RTL839X_MAC_FORCE_MODE_CTRL,
-	.dma_rx_base = RTL839X_DMA_RX_BASE,
-	.dma_tx_base = RTL839X_DMA_TX_BASE,
-	.dma_if_rx_ring_size = rtl839x_dma_if_rx_ring_size,
-	.dma_if_rx_ring_cntr = rtl839x_dma_if_rx_ring_cntr,
-	.dma_if_rx_cur = RTL839X_DMA_IF_RX_CUR,
-	.rst_glb_ctrl = RTL839X_RST_GLB_CTRL,
-	.get_mac_link_sts = rtl839x_get_mac_link_sts,
-	.get_mac_link_dup_sts = rtl839x_get_mac_link_dup_sts,
-	.get_mac_link_spd_sts = rtl839x_get_mac_link_spd_sts,
-	.get_mac_rx_pause_sts = rtl839x_get_mac_rx_pause_sts,
-	.get_mac_tx_pause_sts = rtl839x_get_mac_tx_pause_sts,
-	.mac = RTL839X_MAC,
-	.l2_tbl_flush_ctrl = RTL839X_L2_TBL_FLUSH_CTRL,
-	.update_cntr = rtl839x_update_cntr,
-	.create_tx_header = rtl839x_create_tx_header,
-	.decode_tag = rtl839x_decode_tag,
-};
-
-static const struct rtl838x_eth_reg rtl930x_reg = {
-	.net_irq = rtl93xx_net_irq,
-	.mac_port_ctrl = rtl930x_mac_port_ctrl,
-	.dma_if_intr_rx_runout_sts = RTL930X_DMA_IF_INTR_RX_RUNOUT_STS,
-	.dma_if_intr_rx_done_sts = RTL930X_DMA_IF_INTR_RX_DONE_STS,
-	.dma_if_intr_tx_done_sts = RTL930X_DMA_IF_INTR_TX_DONE_STS,
-	.dma_if_intr_rx_runout_msk = RTL930X_DMA_IF_INTR_RX_RUNOUT_MSK,
-	.dma_if_intr_rx_done_msk = RTL930X_DMA_IF_INTR_RX_DONE_MSK,
-	.dma_if_intr_tx_done_msk = RTL930X_DMA_IF_INTR_TX_DONE_MSK,
-	.l2_ntfy_if_intr_sts = RTL930X_L2_NTFY_IF_INTR_STS,
-	.l2_ntfy_if_intr_msk = RTL930X_L2_NTFY_IF_INTR_MSK,
-	.dma_if_ctrl = RTL930X_DMA_IF_CTRL,
-	.mac_force_mode_ctrl = RTL930X_MAC_FORCE_MODE_CTRL,
-	.dma_rx_base = RTL930X_DMA_RX_BASE,
-	.dma_tx_base = RTL930X_DMA_TX_BASE,
-	.dma_if_rx_ring_size = rtl930x_dma_if_rx_ring_size,
-	.dma_if_rx_ring_cntr = rtl930x_dma_if_rx_ring_cntr,
-	.dma_if_rx_cur = RTL930X_DMA_IF_RX_CUR,
-	.rst_glb_ctrl = RTL930X_RST_GLB_CTRL_0,
-	.get_mac_link_sts = rtl930x_get_mac_link_sts,
-	.get_mac_link_dup_sts = rtl930x_get_mac_link_dup_sts,
-	.get_mac_link_spd_sts = rtl930x_get_mac_link_spd_sts,
-	.get_mac_rx_pause_sts = rtl930x_get_mac_rx_pause_sts,
-	.get_mac_tx_pause_sts = rtl930x_get_mac_tx_pause_sts,
-	.mac = RTL930X_MAC_L2_ADDR_CTRL,
-	.l2_tbl_flush_ctrl = RTL930X_L2_TBL_FLUSH_CTRL,
-	.update_cntr = rtl930x_update_cntr,
-	.create_tx_header = rtl930x_create_tx_header,
-	.decode_tag = rtl930x_decode_tag,
-};
-
-static const struct rtl838x_eth_reg rtl931x_reg = {
-	.net_irq = rtl93xx_net_irq,
-	.mac_port_ctrl = rtl931x_mac_port_ctrl,
-	.dma_if_intr_rx_runout_sts = RTL931X_DMA_IF_INTR_RX_RUNOUT_STS,
-	.dma_if_intr_rx_done_sts = RTL931X_DMA_IF_INTR_RX_DONE_STS,
-	.dma_if_intr_tx_done_sts = RTL931X_DMA_IF_INTR_TX_DONE_STS,
-	.dma_if_intr_rx_runout_msk = RTL931X_DMA_IF_INTR_RX_RUNOUT_MSK,
-	.dma_if_intr_rx_done_msk = RTL931X_DMA_IF_INTR_RX_DONE_MSK,
-	.dma_if_intr_tx_done_msk = RTL931X_DMA_IF_INTR_TX_DONE_MSK,
-	.l2_ntfy_if_intr_sts = RTL931X_L2_NTFY_IF_INTR_STS,
-	.l2_ntfy_if_intr_msk = RTL931X_L2_NTFY_IF_INTR_MSK,
-	.dma_if_ctrl = RTL931X_DMA_IF_CTRL,
-	.mac_force_mode_ctrl = RTL931X_MAC_FORCE_MODE_CTRL,
-	.dma_rx_base = RTL931X_DMA_RX_BASE,
-	.dma_tx_base = RTL931X_DMA_TX_BASE,
-	.dma_if_rx_ring_size = rtl931x_dma_if_rx_ring_size,
-	.dma_if_rx_ring_cntr = rtl931x_dma_if_rx_ring_cntr,
-	.dma_if_rx_cur = RTL931X_DMA_IF_RX_CUR,
-	.rst_glb_ctrl = RTL931X_RST_GLB_CTRL,
-	.get_mac_link_sts = rtl931x_get_mac_link_sts,
-	.get_mac_link_dup_sts = rtl931x_get_mac_link_dup_sts,
-	.get_mac_link_spd_sts = rtl931x_get_mac_link_spd_sts,
-	.get_mac_rx_pause_sts = rtl931x_get_mac_rx_pause_sts,
-	.get_mac_tx_pause_sts = rtl931x_get_mac_tx_pause_sts,
-	.mac = RTL931X_MAC_L2_ADDR_CTRL,
-	.l2_tbl_flush_ctrl = RTL931X_L2_TBL_FLUSH_CTRL,
-	.update_cntr = rtl931x_update_cntr,
-	.create_tx_header = rtl931x_create_tx_header,
-	.decode_tag = rtl931x_decode_tag,
-};
-
-static void rtl838x_hw_reset(struct rtl838x_eth_priv *priv)
-{
-	u32 int_saved, nbuf;
-	u32 reset_mask;
-	int i, pos;
-	
-	pr_info("RESETTING %x, CPU_PORT %d\n", priv->family_id, priv->cpu_port);
-	sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(priv->cpu_port));
-	mdelay(100);
-
-	/* Disable and clear interrupts */
-	if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) {
-		sw_w32(0x00000000, priv->r->dma_if_intr_rx_runout_msk);
-		sw_w32(0xffffffff, priv->r->dma_if_intr_rx_runout_sts);
-		sw_w32(0x00000000, priv->r->dma_if_intr_rx_done_msk);
-		sw_w32(0xffffffff, priv->r->dma_if_intr_rx_done_sts);
-		sw_w32(0x00000000, priv->r->dma_if_intr_tx_done_msk);
-		sw_w32(0x0000000f, priv->r->dma_if_intr_tx_done_sts);
-	} else {
-		sw_w32(0x00000000, priv->r->dma_if_intr_msk);
-		sw_w32(0xffffffff, priv->r->dma_if_intr_sts);
-	}
-
-	if (priv->family_id == RTL8390_FAMILY_ID) {
-		/* Preserve L2 notification and NBUF settings */
-		int_saved = sw_r32(priv->r->dma_if_intr_msk);
-		nbuf = sw_r32(RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL);
-
-		/* Disable link change interrupt on RTL839x */
-		sw_w32(0, RTL839X_IMR_PORT_LINK_STS_CHG);
-		sw_w32(0, RTL839X_IMR_PORT_LINK_STS_CHG + 4);
-
-		sw_w32(0x00000000, priv->r->dma_if_intr_msk);
-		sw_w32(0xffffffff, priv->r->dma_if_intr_sts);
-	}
-
-	/* Reset NIC (SW_NIC_RST) and queues (SW_Q_RST) */
-	if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID)
-		reset_mask = 0x6;
-	else
-		reset_mask = 0xc;
-
-	sw_w32_mask(0, reset_mask, priv->r->rst_glb_ctrl);
-
-	do { /* Wait for reset of NIC and Queues done */
-		udelay(20);
-	} while (sw_r32(priv->r->rst_glb_ctrl) & reset_mask);
-	mdelay(100);
-
-	/* Setup Head of Line */
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		sw_w32(0, RTL838X_DMA_IF_RX_RING_SIZE);  // Disabled on RTL8380
-	if (priv->family_id == RTL8390_FAMILY_ID)
-		sw_w32(0xffffffff, RTL839X_DMA_IF_RX_RING_CNTR);
-	if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) {
-		for (i = 0; i < priv->rxrings; i++) {
-			pos = (i % 3) * 10;
-			sw_w32_mask(0x3ff << pos, 0, priv->r->dma_if_rx_ring_size(i));
-			sw_w32_mask(0x3ff << pos, priv->rxringlen,
-				    priv->r->dma_if_rx_ring_cntr(i));
-		}
-	}
-
-	/* Re-enable link change interrupt */
-	if (priv->family_id == RTL8390_FAMILY_ID) {
-		sw_w32(0xffffffff, RTL839X_ISR_PORT_LINK_STS_CHG);
-		sw_w32(0xffffffff, RTL839X_ISR_PORT_LINK_STS_CHG + 4);
-		sw_w32(0xffffffff, RTL839X_IMR_PORT_LINK_STS_CHG);
-		sw_w32(0xffffffff, RTL839X_IMR_PORT_LINK_STS_CHG + 4);
-
-		/* Restore notification settings: on RTL838x these bits are null */
-		sw_w32_mask(7 << 20, int_saved & (7 << 20), priv->r->dma_if_intr_msk);
-		sw_w32(nbuf, RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL);
-	}
-}
-
-static void rtl838x_hw_ring_setup(struct rtl838x_eth_priv *priv)
-{
-	int i;
-	struct ring_b *ring = priv->membase;
-
-	for (i = 0; i < priv->rxrings; i++)
-		sw_w32(KSEG1ADDR(&ring->rx_r[i]), priv->r->dma_rx_base + i * 4);
-
-	for (i = 0; i < TXRINGS; i++)
-		sw_w32(KSEG1ADDR(&ring->tx_r[i]), priv->r->dma_tx_base + i * 4);
-}
-
-static void rtl838x_hw_en_rxtx(struct rtl838x_eth_priv *priv)
-{
-	/* Disable Head of Line features for all RX rings */
-	sw_w32(0xffffffff, priv->r->dma_if_rx_ring_size(0));
-
-	/* Truncate RX buffer to 0x640 (1600) bytes, pad TX */
-	sw_w32(0x06400020, priv->r->dma_if_ctrl);
-
-	/* Enable RX done, RX overflow and TX done interrupts */
-	sw_w32(0xfffff, priv->r->dma_if_intr_msk);
-
-	/* Enable DMA, engine expects empty FCS field */
-	sw_w32_mask(0, RX_EN | TX_EN, priv->r->dma_if_ctrl);
-
-	/* Restart TX/RX to CPU port */
-	sw_w32_mask(0x0, 0x3, priv->r->mac_port_ctrl(priv->cpu_port));
-	/* Set Speed, duplex, flow control
-	 * FORCE_EN | LINK_EN | NWAY_EN | DUP_SEL
-	 * | SPD_SEL = 0b10 | FORCE_FC_EN | PHY_MASTER_SLV_MANUAL_EN
-	 * | MEDIA_SEL
-	 */
-	sw_w32(0x6192F, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4);
-
-	/* Enable CRC checks on CPU-port */
-	sw_w32_mask(0, BIT(3), priv->r->mac_port_ctrl(priv->cpu_port));
-}
-
-static void rtl839x_hw_en_rxtx(struct rtl838x_eth_priv *priv)
-{
-	/* Setup CPU-Port: RX Buffer */
-	sw_w32(0x0000c808, priv->r->dma_if_ctrl);
-
-	/* Enable Notify, RX done, RX overflow and TX done interrupts */
-	sw_w32(0x007fffff, priv->r->dma_if_intr_msk); // Notify IRQ!
-
-	/* Enable DMA */
-	sw_w32_mask(0, RX_EN | TX_EN, priv->r->dma_if_ctrl);
-
-	/* Restart TX/RX to CPU port, enable CRC checking */
-	sw_w32_mask(0x0, 0x3 | BIT(3), priv->r->mac_port_ctrl(priv->cpu_port));
-
-	/* CPU port joins Lookup Miss Flooding Portmask */
-	// TODO: The code below should also work for the RTL838x
-	sw_w32(0x28000, RTL839X_TBL_ACCESS_L2_CTRL);
-	sw_w32_mask(0, 0x80000000, RTL839X_TBL_ACCESS_L2_DATA(0));
-	sw_w32(0x38000, RTL839X_TBL_ACCESS_L2_CTRL);
-
-	/* Force CPU port link up */
-	sw_w32_mask(0, 3, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4);
-}
-
-static void rtl93xx_hw_en_rxtx(struct rtl838x_eth_priv *priv)
-{
-	int i, pos;
-	u32 v;
-
-	/* Setup CPU-Port: RX Buffer truncated at 1600 Bytes */
-	sw_w32(0x06400040, priv->r->dma_if_ctrl);
-
-	for (i = 0; i < priv->rxrings; i++) {
-		pos = (i % 3) * 10;
-		sw_w32_mask(0x3ff << pos, priv->rxringlen << pos, priv->r->dma_if_rx_ring_size(i));
-
-		// Some SoCs have issues with missing underflow protection
-		v = (sw_r32(priv->r->dma_if_rx_ring_cntr(i)) >> pos) & 0x3ff;
-		sw_w32_mask(0x3ff << pos, v, priv->r->dma_if_rx_ring_cntr(i));
-	}
-
-	/* Enable Notify, RX done, RX overflow and TX done interrupts */
-	sw_w32(0xffffffff, priv->r->dma_if_intr_rx_runout_msk);
-	sw_w32(0xffffffff, priv->r->dma_if_intr_rx_done_msk);
-	sw_w32(0x0000000f, priv->r->dma_if_intr_tx_done_msk);
-
-	/* Enable DMA */
-	sw_w32_mask(0, RX_EN_93XX | TX_EN_93XX, priv->r->dma_if_ctrl);
-
-	/* Restart TX/RX to CPU port, enable CRC checking */
-	sw_w32_mask(0x0, 0x3 | BIT(4), priv->r->mac_port_ctrl(priv->cpu_port));
-
-	if (priv->family_id == RTL9300_FAMILY_ID)
-		sw_w32_mask(0, BIT(priv->cpu_port), RTL930X_L2_UNKN_UC_FLD_PMSK);
-	else
-		sw_w32_mask(0, BIT(priv->cpu_port), RTL931X_L2_UNKN_UC_FLD_PMSK);
-
-	if (priv->family_id == RTL9300_FAMILY_ID)
-		sw_w32(0x217, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4);
-	else
-		sw_w32(0x2a1d, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4);
-}
-
-static void rtl838x_setup_ring_buffer(struct rtl838x_eth_priv *priv, struct ring_b *ring)
-{
-	int i, j;
-
-	struct p_hdr *h;
-
-	for (i = 0; i < priv->rxrings; i++) {
-		for (j = 0; j < priv->rxringlen; j++) {
-			h = &ring->rx_header[i][j];
-			memset(h, 0, sizeof(struct p_hdr));
-			h->buf = (u8 *)KSEG1ADDR(ring->rx_space
-					+ i * priv->rxringlen * RING_BUFFER
-					+ j * RING_BUFFER);
-			h->size = RING_BUFFER;
-			/* All rings owned by switch, last one wraps */
-			ring->rx_r[i][j] = KSEG1ADDR(h) | 1 
-					   | (j == (priv->rxringlen - 1) ? WRAP : 0);
-		}
-		ring->c_rx[i] = 0;
-	}
-
-	for (i = 0; i < TXRINGS; i++) {
-		for (j = 0; j < TXRINGLEN; j++) {
-			h = &ring->tx_header[i][j];
-			memset(h, 0, sizeof(struct p_hdr));
-			h->buf = (u8 *)KSEG1ADDR(ring->tx_space
-					+ i * TXRINGLEN * RING_BUFFER
-					+ j * RING_BUFFER);
-			h->size = RING_BUFFER;
-			ring->tx_r[i][j] = KSEG1ADDR(&ring->tx_header[i][j]);
-		}
-		/* Last header is wrapping around */
-		ring->tx_r[i][j-1] |= WRAP;
-		ring->c_tx[i] = 0;
-	}
-}
-
-static void rtl839x_setup_notify_ring_buffer(struct rtl838x_eth_priv *priv)
-{
-	int i;
-	struct notify_b *b = priv->membase + sizeof(struct ring_b);
-
-	for (i = 0; i < NOTIFY_BLOCKS; i++)
-		b->ring[i] = KSEG1ADDR(&b->blocks[i]) | 1 | (i == (NOTIFY_BLOCKS - 1) ? WRAP : 0);
-
-	sw_w32((u32) b->ring, RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL);
-	sw_w32_mask(0x3ff << 2, 100 << 2, RTL839X_L2_NOTIFICATION_CTRL);
-
-	/* Setup notification events */
-	sw_w32_mask(0, 1 << 14, RTL839X_L2_CTRL_0); // RTL8390_L2_CTRL_0_FLUSH_NOTIFY_EN
-	sw_w32_mask(0, 1 << 12, RTL839X_L2_NOTIFICATION_CTRL); // SUSPEND_NOTIFICATION_EN
-
-	/* Enable Notification */
-	sw_w32_mask(0, 1 << 0, RTL839X_L2_NOTIFICATION_CTRL);
-	priv->lastEvent = 0;
-}
-
-static int rtl838x_eth_open(struct net_device *ndev)
-{
-	unsigned long flags;
-	struct rtl838x_eth_priv *priv = netdev_priv(ndev);
-	struct ring_b *ring = priv->membase;
-	int i;
-
-	pr_debug("%s called: RX rings %d(length %d), TX rings %d(length %d)\n",
-		__func__, priv->rxrings, priv->rxringlen, TXRINGS, TXRINGLEN);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	rtl838x_hw_reset(priv);
-	rtl838x_setup_ring_buffer(priv, ring);
-	if (priv->family_id == RTL8390_FAMILY_ID) {
-		rtl839x_setup_notify_ring_buffer(priv);
-		/* Make sure the ring structure is visible to the ASIC */
-		mb();
-		flush_cache_all();
-	}
-
-	rtl838x_hw_ring_setup(priv);
-	phylink_start(priv->phylink);
-
-	for (i = 0; i < priv->rxrings; i++)
-		napi_enable(&priv->rx_qs[i].napi);
-
-	switch (priv->family_id) {
-	case RTL8380_FAMILY_ID:
-		rtl838x_hw_en_rxtx(priv);
-		/* Trap IGMP/MLD traffic to CPU-Port */
-		sw_w32(0x3, RTL838X_SPCL_TRAP_IGMP_CTRL);
-		/* Flush learned FDB entries on link down of a port */
-		sw_w32_mask(0, BIT(7), RTL838X_L2_CTRL_0);
-		break;
-
-	case RTL8390_FAMILY_ID:
-		rtl839x_hw_en_rxtx(priv);
-		// Trap MLD and IGMP messages to CPU_PORT
-		sw_w32(0x3, RTL839X_SPCL_TRAP_IGMP_CTRL);
-		/* Flush learned FDB entries on link down of a port */
-		sw_w32_mask(0, BIT(7), RTL839X_L2_CTRL_0);
-		break;
-
-	case RTL9300_FAMILY_ID:
-		rtl93xx_hw_en_rxtx(priv);
-		/* Flush learned FDB entries on link down of a port */
-		sw_w32_mask(0, BIT(7), RTL930X_L2_CTRL);
-		// Trap MLD and IGMP messages to CPU_PORT
-		sw_w32((0x2 << 3) | 0x2,  RTL930X_VLAN_APP_PKT_CTRL);
-		break;
-
-	case RTL9310_FAMILY_ID:
-		rtl93xx_hw_en_rxtx(priv);
-
-		// Trap MLD and IGMP messages to CPU_PORT
-		sw_w32((0x2 << 3) | 0x2,  RTL931X_VLAN_APP_PKT_CTRL);
-
-		// Disable External CPU access to switch, clear EXT_CPU_EN
-		sw_w32_mask(BIT(2), 0, RTL931X_MAC_L2_GLOBAL_CTRL2);
-
-		// Set PCIE_PWR_DOWN
-		sw_w32_mask(0, BIT(1), RTL931X_PS_SOC_CTRL);
-		break;
-	}
-
-	netif_tx_start_all_queues(ndev);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return 0;
-}
-
-static void rtl838x_hw_stop(struct rtl838x_eth_priv *priv)
-{
-	u32 force_mac = priv->family_id == RTL8380_FAMILY_ID ? 0x6192C : 0x75;
-	u32 clear_irq = priv->family_id == RTL8380_FAMILY_ID ? 0x000fffff : 0x007fffff;
-	int i;
-
-	// Disable RX/TX from/to CPU-port
-	sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(priv->cpu_port));
-
-	/* Disable traffic */
-	if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID)
-		sw_w32_mask(RX_EN_93XX | TX_EN_93XX, 0, priv->r->dma_if_ctrl);
-	else
-		sw_w32_mask(RX_EN | TX_EN, 0, priv->r->dma_if_ctrl);
-	mdelay(200); // Test, whether this is needed
-
-	/* Block all ports */
-	if (priv->family_id == RTL8380_FAMILY_ID) {
-		sw_w32(0x03000000, RTL838X_TBL_ACCESS_DATA_0(0));
-		sw_w32(0x00000000, RTL838X_TBL_ACCESS_DATA_0(1));
-		sw_w32(1 << 15 | 2 << 12, RTL838X_TBL_ACCESS_CTRL_0);
-	}
-
-	/* Flush L2 address cache */
-	if (priv->family_id == RTL8380_FAMILY_ID) {
-		for (i = 0; i <= priv->cpu_port; i++) {
-			sw_w32(1 << 26 | 1 << 23 | i << 5, priv->r->l2_tbl_flush_ctrl);
-			do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & (1 << 26));
-		}
-	} else if (priv->family_id == RTL8390_FAMILY_ID) {
-		for (i = 0; i <= priv->cpu_port; i++) {
-			sw_w32(1 << 28 | 1 << 25 | i << 5, priv->r->l2_tbl_flush_ctrl);
-			do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & (1 << 28));
-		}
-	}
-	// TODO: L2 flush register is 64 bit on RTL931X and 930X
-
-	/* CPU-Port: Link down */
-	if (priv->family_id == RTL8380_FAMILY_ID || priv->family_id == RTL8390_FAMILY_ID)
-		sw_w32(force_mac, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4);
-	else if (priv->family_id == RTL9300_FAMILY_ID)
-		sw_w32_mask(0x3, 0, priv->r->mac_force_mode_ctrl + priv->cpu_port *4);
-	else if (priv->family_id == RTL9310_FAMILY_ID)
-		sw_w32_mask(BIT(0) | BIT(9), 0, priv->r->mac_force_mode_ctrl + priv->cpu_port *4);
-	mdelay(100);
-
-	/* Disable all TX/RX interrupts */
-	if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) {
-		sw_w32(0x00000000, priv->r->dma_if_intr_rx_runout_msk);
-		sw_w32(0xffffffff, priv->r->dma_if_intr_rx_runout_sts);
-		sw_w32(0x00000000, priv->r->dma_if_intr_rx_done_msk);
-		sw_w32(0xffffffff, priv->r->dma_if_intr_rx_done_sts);
-		sw_w32(0x00000000, priv->r->dma_if_intr_tx_done_msk);
-		sw_w32(0x0000000f, priv->r->dma_if_intr_tx_done_sts);
-	} else {
-		sw_w32(0x00000000, priv->r->dma_if_intr_msk);
-		sw_w32(clear_irq, priv->r->dma_if_intr_sts);
-	}
-
-	/* Disable TX/RX DMA */
-	sw_w32(0x00000000, priv->r->dma_if_ctrl);
-	mdelay(200);
-}
-
-static int rtl838x_eth_stop(struct net_device *ndev)
-{
-	unsigned long flags;
-	int i;
-	struct rtl838x_eth_priv *priv = netdev_priv(ndev);
-
-	pr_info("in %s\n", __func__);
-
-	phylink_stop(priv->phylink);
-	rtl838x_hw_stop(priv);
-
-	for (i = 0; i < priv->rxrings; i++)
-		napi_disable(&priv->rx_qs[i].napi);
-
-	netif_tx_stop_all_queues(ndev);
-
-	return 0;
-}
-
-static void rtl838x_eth_set_multicast_list(struct net_device *ndev)
-{
-	/*
-	 * Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F})
-	 * CTRL_0_FULL = GENMASK(21, 0) = 0x3FFFFF
-	 */
-	if (!(ndev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
-		sw_w32(0x0, RTL838X_RMA_CTRL_0);
-		sw_w32(0x0, RTL838X_RMA_CTRL_1);
-	}
-	if (ndev->flags & IFF_ALLMULTI)
-		sw_w32(GENMASK(21, 0), RTL838X_RMA_CTRL_0);
-	if (ndev->flags & IFF_PROMISC) {
-		sw_w32(GENMASK(21, 0), RTL838X_RMA_CTRL_0);
-		sw_w32(0x7fff, RTL838X_RMA_CTRL_1);
-	}
-}
-
-static void rtl839x_eth_set_multicast_list(struct net_device *ndev)
-{
-	/*
-	 * Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F})
-	 * CTRL_0_FULL = GENMASK(31, 2) = 0xFFFFFFFC
-	 * Lower two bits are reserved, corresponding to RMA 01-80-C2-00-00-00
-	 * CTRL_1_FULL = CTRL_2_FULL = GENMASK(31, 0)
-	 */
-	if (!(ndev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
-		sw_w32(0x0, RTL839X_RMA_CTRL_0);
-		sw_w32(0x0, RTL839X_RMA_CTRL_1);
-		sw_w32(0x0, RTL839X_RMA_CTRL_2);
-		sw_w32(0x0, RTL839X_RMA_CTRL_3);
-	}
-	if (ndev->flags & IFF_ALLMULTI) {
-		sw_w32(GENMASK(31, 2), RTL839X_RMA_CTRL_0);
-		sw_w32(GENMASK(31, 0), RTL839X_RMA_CTRL_1);
-		sw_w32(GENMASK(31, 0), RTL839X_RMA_CTRL_2);
-	}
-	if (ndev->flags & IFF_PROMISC) {
-		sw_w32(GENMASK(31, 2), RTL839X_RMA_CTRL_0);
-		sw_w32(GENMASK(31, 0), RTL839X_RMA_CTRL_1);
-		sw_w32(GENMASK(31, 0), RTL839X_RMA_CTRL_2);
-		sw_w32(0x3ff, RTL839X_RMA_CTRL_3);
-	}
-}
-
-static void rtl930x_eth_set_multicast_list(struct net_device *ndev)
-{
-	/*
-	 * Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F})
-	 * CTRL_0_FULL = GENMASK(31, 2) = 0xFFFFFFFC
-	 * Lower two bits are reserved, corresponding to RMA 01-80-C2-00-00-00
-	 * CTRL_1_FULL = CTRL_2_FULL = GENMASK(31, 0)
-	 */
-	if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC)) {
-		sw_w32(GENMASK(31, 2), RTL930X_RMA_CTRL_0);
-		sw_w32(GENMASK(31, 0), RTL930X_RMA_CTRL_1);
-		sw_w32(GENMASK(31, 0), RTL930X_RMA_CTRL_2);
-	} else {
-		sw_w32(0x0, RTL930X_RMA_CTRL_0);
-		sw_w32(0x0, RTL930X_RMA_CTRL_1);
-		sw_w32(0x0, RTL930X_RMA_CTRL_2);
-	}
-}
-
-static void rtl931x_eth_set_multicast_list(struct net_device *ndev)
-{
-	/*
-	 * Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F})
-	 * CTRL_0_FULL = GENMASK(31, 2) = 0xFFFFFFFC
-	 * Lower two bits are reserved, corresponding to RMA 01-80-C2-00-00-00.
-	 * CTRL_1_FULL = CTRL_2_FULL = GENMASK(31, 0)
-	 */
-	if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC)) {
-		sw_w32(GENMASK(31, 2), RTL931X_RMA_CTRL_0);
-		sw_w32(GENMASK(31, 0), RTL931X_RMA_CTRL_1);
-		sw_w32(GENMASK(31, 0), RTL931X_RMA_CTRL_2);
-	} else {
-		sw_w32(0x0, RTL931X_RMA_CTRL_0);
-		sw_w32(0x0, RTL931X_RMA_CTRL_1);
-		sw_w32(0x0, RTL931X_RMA_CTRL_2);
-	}
-}
-
-static void rtl838x_eth_tx_timeout(struct net_device *ndev, unsigned int txqueue)
-{
-	unsigned long flags;
-	struct rtl838x_eth_priv *priv = netdev_priv(ndev);
-
-	pr_warn("%s\n", __func__);
-	spin_lock_irqsave(&priv->lock, flags);
-	rtl838x_hw_stop(priv);
-	rtl838x_hw_ring_setup(priv);
-	rtl838x_hw_en_rxtx(priv);
-	netif_trans_update(ndev);
-	netif_start_queue(ndev);
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static int rtl838x_eth_tx(struct sk_buff *skb, struct net_device *dev)
-{
-	int len, i;
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-	struct ring_b *ring = priv->membase;
-	uint32_t val;
-	int ret;
-	unsigned long flags;
-	struct p_hdr *h;
-	int dest_port = -1;
-	int q = skb_get_queue_mapping(skb) % TXRINGS;
-
-	if (q) // Check for high prio queue
-		pr_debug("SKB priority: %d\n", skb->priority);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	len = skb->len;
-
-	/* Check for DSA tagging at the end of the buffer */
-	if (netdev_uses_dsa(dev) && skb->data[len-4] == 0x80
-			&& skb->data[len-3] < priv->cpu_port
-			&& skb->data[len-2] == 0x10
-			&& skb->data[len-1] == 0x00) {
-		/* Reuse tag space for CRC if possible */
-		dest_port = skb->data[len-3];
-		skb->data[len-4] = skb->data[len-3] = skb->data[len-2] = skb->data[len-1] = 0x00;
-		len -= 4;
-	}
-
-	len += 4; // Add space for CRC
-
-	if (skb_padto(skb, len)) {
-		ret = NETDEV_TX_OK;
-		goto txdone;
-	}
-
-	/* We can send this packet if CPU owns the descriptor */
-	if (!(ring->tx_r[q][ring->c_tx[q]] & 0x1)) {
-
-		/* Set descriptor for tx */
-		h = &ring->tx_header[q][ring->c_tx[q]];
-		h->size = len;
-		h->len = len;
-		// On RTL8380 SoCs, small packet lengths being sent need adjustments
-		if (priv->family_id == RTL8380_FAMILY_ID) {
-			if (len < ETH_ZLEN - 4)
-				h->len -= 4;
-		}
-
-		if (dest_port >= 0)
-			priv->r->create_tx_header(h, dest_port, skb->priority >> 1);
-
-		/* Copy packet data to tx buffer */
-		memcpy((void *)KSEG1ADDR(h->buf), skb->data, len);
-		/* Make sure packet data is visible to ASIC */
-		wmb();
-
-		/* Hand over to switch */
-		ring->tx_r[q][ring->c_tx[q]] |= 1;
-
-		// Before starting TX, prevent a Lextra bus bug on RTL8380 SoCs
-		if (priv->family_id == RTL8380_FAMILY_ID) {
-			for (i = 0; i < 10; i++) {
-				val = sw_r32(priv->r->dma_if_ctrl);
-				if ((val & 0xc) == 0xc)
-					break;
-			}
-		}
-
-		/* Tell switch to send data */
-		if (priv->family_id == RTL9310_FAMILY_ID
-			|| priv->family_id == RTL9300_FAMILY_ID) {
-			// Ring ID q == 0: Low priority, Ring ID = 1: High prio queue
-			if (!q)
-				sw_w32_mask(0, BIT(2), priv->r->dma_if_ctrl);
-			else
-				sw_w32_mask(0, BIT(3), priv->r->dma_if_ctrl);
-		} else {
-			sw_w32_mask(0, TX_DO, priv->r->dma_if_ctrl);
-		}
-
-		dev->stats.tx_packets++;
-		dev->stats.tx_bytes += len;
-		dev_kfree_skb(skb);
-		ring->c_tx[q] = (ring->c_tx[q] + 1) % TXRINGLEN;
-		ret = NETDEV_TX_OK;
-	} else {
-		dev_warn(&priv->pdev->dev, "Data is owned by switch\n");
-		ret = NETDEV_TX_BUSY;
-	}
-txdone:
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return ret;
-}
-
-/*
- * Return queue number for TX. On the RTL83XX, these queues have equal priority
- * so we do round-robin
- */
-u16 rtl83xx_pick_tx_queue(struct net_device *dev, struct sk_buff *skb,
-			  struct net_device *sb_dev)
-{
-	static u8 last = 0;
-
-	last++;
-	return last % TXRINGS;
-}
-
-/*
- * Return queue number for TX. On the RTL93XX, queue 1 is the high priority queue
- */
-u16 rtl93xx_pick_tx_queue(struct net_device *dev, struct sk_buff *skb,
-			  struct net_device *sb_dev)
-{
-	if (skb->priority >= TC_PRIO_CONTROL)
-		return 1;
-	return 0;
-}
-
-static int rtl838x_hw_receive(struct net_device *dev, int r, int budget)
-{
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-	struct ring_b *ring = priv->membase;
-	struct sk_buff *skb;
-	LIST_HEAD(rx_list);
-	unsigned long flags;
-	int i, len, work_done = 0;
-	u8 *data, *skb_data;
-	unsigned int val;
-	u32	*last;
-	struct p_hdr *h;
-	bool dsa = netdev_uses_dsa(dev);
-	struct dsa_tag tag;
-
-	pr_debug("---------------------------------------------------------- RX - %d\n", r);
-	spin_lock_irqsave(&priv->lock, flags);
-	last = (u32 *)KSEG1ADDR(sw_r32(priv->r->dma_if_rx_cur + r * 4));
-
-	do {
-		if ((ring->rx_r[r][ring->c_rx[r]] & 0x1)) {
-			if (&ring->rx_r[r][ring->c_rx[r]] != last) {
-				netdev_warn(dev, "Ring contention: r: %x, last %x, cur %x\n",
-				    r, (uint32_t)last, (u32) &ring->rx_r[r][ring->c_rx[r]]);
-			}
-			break;
-		}
-
-		h = &ring->rx_header[r][ring->c_rx[r]];
-		data = (u8 *)KSEG1ADDR(h->buf);
-		len = h->len;
-		if (!len)
-			break;
-		work_done++;
-
-		len -= 4; /* strip the CRC */
-		/* Add 4 bytes for cpu_tag */
-		if (dsa)
-			len += 4;
-
-		skb = netdev_alloc_skb(dev, len + 4);
-		skb_reserve(skb, NET_IP_ALIGN);
-
-		if (likely(skb)) {
-			/* BUG: Prevent bug on RTL838x SoCs*/
-			if (priv->family_id == RTL8380_FAMILY_ID) {
-				sw_w32(0xffffffff, priv->r->dma_if_rx_ring_size(0));
-				for (i = 0; i < priv->rxrings; i++) {
-					/* Update each ring cnt */
-					val = sw_r32(priv->r->dma_if_rx_ring_cntr(i));
-					sw_w32(val, priv->r->dma_if_rx_ring_cntr(i));
-				}
-			}
-
-			skb_data = skb_put(skb, len);
-			/* Make sure data is visible */
-			mb();
-			memcpy(skb->data, (u8 *)KSEG1ADDR(data), len);
-			/* Overwrite CRC with cpu_tag */
-			if (dsa) {
-				priv->r->decode_tag(h, &tag);
-				skb->data[len-4] = 0x80;
-				skb->data[len-3] = tag.port;
-				skb->data[len-2] = 0x10;
-				skb->data[len-1] = 0x00;
-				if (tag.l2_offloaded)
-					skb->data[len-3] |= 0x40;
-			}
-
-			if (tag.queue >= 0)
-				pr_debug("Queue: %d, len: %d, reason %d port %d\n",
-					 tag.queue, len, tag.reason, tag.port);
-
-			skb->protocol = eth_type_trans(skb, dev);
-			if (dev->features & NETIF_F_RXCSUM) {
-				if (tag.crc_error)
-					skb_checksum_none_assert(skb);
-				else
-					skb->ip_summed = CHECKSUM_UNNECESSARY;
-			}
-			dev->stats.rx_packets++;
-			dev->stats.rx_bytes += len;
-
-			list_add_tail(&skb->list, &rx_list);
-		} else {
-			if (net_ratelimit())
-				dev_warn(&dev->dev, "low on memory - packet dropped\n");
-			dev->stats.rx_dropped++;
-		}
-
-		/* Reset header structure */
-		memset(h, 0, sizeof(struct p_hdr));
-		h->buf = data;
-		h->size = RING_BUFFER;
-
-		ring->rx_r[r][ring->c_rx[r]] = KSEG1ADDR(h) | 0x1 
-			| (ring->c_rx[r] == (priv->rxringlen - 1) ? WRAP : 0x1);
-		ring->c_rx[r] = (ring->c_rx[r] + 1) % priv->rxringlen;
-		last = (u32 *)KSEG1ADDR(sw_r32(priv->r->dma_if_rx_cur + r * 4));
-	} while (&ring->rx_r[r][ring->c_rx[r]] != last && work_done < budget);
-
-	netif_receive_skb_list(&rx_list);
-
-	// Update counters
-	priv->r->update_cntr(r, 0);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return work_done;
-}
-
-static int rtl838x_poll_rx(struct napi_struct *napi, int budget)
-{
-	struct rtl838x_rx_q *rx_q = container_of(napi, struct rtl838x_rx_q, napi);
-	struct rtl838x_eth_priv *priv = rx_q->priv;
-	int work_done = 0;
-	int r = rx_q->id;
-	int work;
-
-	while (work_done < budget) {
-		work = rtl838x_hw_receive(priv->netdev, r, budget - work_done);
-		if (!work)
-			break;
-		work_done += work;
-	}
-
-	if (work_done < budget) {
-		napi_complete_done(napi, work_done);
-
-		/* Enable RX interrupt */
-		if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID)
-			sw_w32(0xffffffff, priv->r->dma_if_intr_rx_done_msk);
-		else
-			sw_w32_mask(0, 0xf00ff | BIT(r + 8), priv->r->dma_if_intr_msk);
-	}
-	return work_done;
-}
-
-
-static void rtl838x_validate(struct phylink_config *config,
-			 unsigned long *supported,
-			 struct phylink_link_state *state)
-{
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-
-	pr_debug("In %s\n", __func__);
-
-	if (!phy_interface_mode_is_rgmii(state->interface) &&
-	    state->interface != PHY_INTERFACE_MODE_1000BASEX &&
-	    state->interface != PHY_INTERFACE_MODE_MII &&
-	    state->interface != PHY_INTERFACE_MODE_REVMII &&
-	    state->interface != PHY_INTERFACE_MODE_GMII &&
-	    state->interface != PHY_INTERFACE_MODE_QSGMII &&
-	    state->interface != PHY_INTERFACE_MODE_INTERNAL &&
-	    state->interface != PHY_INTERFACE_MODE_SGMII) {
-		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-		pr_err("Unsupported interface: %d\n", state->interface);
-		return;
-	}
-
-	/* Allow all the expected bits */
-	phylink_set(mask, Autoneg);
-	phylink_set_port_modes(mask);
-	phylink_set(mask, Pause);
-	phylink_set(mask, Asym_Pause);
-
-	/* With the exclusion of MII and Reverse MII, we support Gigabit,
-	 * including Half duplex
-	 */
-	if (state->interface != PHY_INTERFACE_MODE_MII &&
-	    state->interface != PHY_INTERFACE_MODE_REVMII) {
-		phylink_set(mask, 1000baseT_Full);
-		phylink_set(mask, 1000baseT_Half);
-	}
-
-	phylink_set(mask, 10baseT_Half);
-	phylink_set(mask, 10baseT_Full);
-	phylink_set(mask, 100baseT_Half);
-	phylink_set(mask, 100baseT_Full);
-
-	bitmap_and(supported, supported, mask,
-		   __ETHTOOL_LINK_MODE_MASK_NBITS);
-	bitmap_and(state->advertising, state->advertising, mask,
-		   __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
-
-static void rtl838x_mac_config(struct phylink_config *config,
-			       unsigned int mode,
-			       const struct phylink_link_state *state)
-{
-	/* This is only being called for the master device,
-	 * i.e. the CPU-Port. We don't need to do anything.
-	 */
-
-	pr_info("In %s, mode %x\n", __func__, mode);
-}
-
-static void rtl838x_mac_an_restart(struct phylink_config *config)
-{
-	struct net_device *dev = container_of(config->dev, struct net_device, dev);
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-
-	/* This works only on RTL838x chips */
-	if (priv->family_id != RTL8380_FAMILY_ID)
-		return;
-
-	pr_debug("In %s\n", __func__);
-	/* Restart by disabling and re-enabling link */
-	sw_w32(0x6192D, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4);
-	mdelay(20);
-	sw_w32(0x6192F, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4);
-}
-
-static void rtl838x_mac_pcs_get_state(struct phylink_config *config,
-				  struct phylink_link_state *state)
-{
-	u32 speed;
-	struct net_device *dev = container_of(config->dev, struct net_device, dev);
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-	int port = priv->cpu_port;
-
-	pr_info("In %s\n", __func__);
-
-	state->link = priv->r->get_mac_link_sts(port) ? 1 : 0;
-	state->duplex = priv->r->get_mac_link_dup_sts(port) ? 1 : 0;
-
-	pr_info("%s link status is %d\n", __func__, state->link);
-	speed = priv->r->get_mac_link_spd_sts(port);
-	switch (speed) {
-	case 0:
-		state->speed = SPEED_10;
-		break;
-	case 1:
-		state->speed = SPEED_100;
-		break;
-	case 2:
-		state->speed = SPEED_1000;
-		break;
-	case 5:
-		state->speed = SPEED_2500;
-		break;
-	case 6:
-		state->speed = SPEED_5000;
-		break;
-	case 4:
-		state->speed = SPEED_10000;
-		break;
-	default:
-		state->speed = SPEED_UNKNOWN;
-		break;
-	}
-
-	state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX);
-	if (priv->r->get_mac_rx_pause_sts(port))
-		state->pause |= MLO_PAUSE_RX;
-	if (priv->r->get_mac_tx_pause_sts(port))
-		state->pause |= MLO_PAUSE_TX;
-}
-
-static void rtl838x_mac_link_down(struct phylink_config *config,
-				  unsigned int mode,
-				  phy_interface_t interface)
-{
-	struct net_device *dev = container_of(config->dev, struct net_device, dev);
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-
-	pr_debug("In %s\n", __func__);
-	/* Stop TX/RX to port */
-	sw_w32_mask(0x03, 0, priv->r->mac_port_ctrl(priv->cpu_port));
-}
-
-static void rtl838x_mac_link_up(struct phylink_config *config,
-			    struct phy_device *phy, unsigned int mode,
-			    phy_interface_t interface, int speed, int duplex,
-			    bool tx_pause, bool rx_pause)
-{
-	struct net_device *dev = container_of(config->dev, struct net_device, dev);
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-
-	pr_debug("In %s\n", __func__);
-	/* Restart TX/RX to port */
-	sw_w32_mask(0, 0x03, priv->r->mac_port_ctrl(priv->cpu_port));
-}
-
-static void rtl838x_set_mac_hw(struct net_device *dev, u8 *mac)
-{
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	pr_debug("In %s\n", __func__);
-	sw_w32((mac[0] << 8) | mac[1], priv->r->mac);
-	sw_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5], priv->r->mac + 4);
-
-	if (priv->family_id == RTL8380_FAMILY_ID) {
-		/* 2 more registers, ALE/MAC block */
-		sw_w32((mac[0] << 8) | mac[1], RTL838X_MAC_ALE);
-		sw_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
-		       (RTL838X_MAC_ALE + 4));
-
-		sw_w32((mac[0] << 8) | mac[1], RTL838X_MAC2);
-		sw_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
-		       RTL838X_MAC2 + 4);
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static int rtl838x_set_mac_address(struct net_device *dev, void *p)
-{
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-	const struct sockaddr *addr = p;
-	u8 *mac = (u8 *) (addr->sa_data);
-
-	if (!is_valid_ether_addr(addr->sa_data))
-		return -EADDRNOTAVAIL;
-
-	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
-	rtl838x_set_mac_hw(dev, mac);
-
-	pr_info("Using MAC %08x%08x\n", sw_r32(priv->r->mac), sw_r32(priv->r->mac + 4));
-	return 0;
-}
-
-static int rtl8390_init_mac(struct rtl838x_eth_priv *priv)
-{
-	// We will need to set-up EEE and the egress-rate limitation
-	return 0;
-}
-
-static int rtl8380_init_mac(struct rtl838x_eth_priv *priv)
-{
-	int i;
-
-	if (priv->family_id == 0x8390)
-		return rtl8390_init_mac(priv);
-
-    // At present we do not know how to set up EEE on any other SoC than RTL8380
-	if (priv->family_id != 0x8380)
-		return 0;
-
-	pr_info("%s\n", __func__);
-	/* fix timer for EEE */
-	sw_w32(0x5001411, RTL838X_EEE_TX_TIMER_GIGA_CTRL);
-	sw_w32(0x5001417, RTL838X_EEE_TX_TIMER_GELITE_CTRL);
-
-	/* Init VLAN. TODO: Understand what is being done, here */
-	if (priv->id == 0x8382) {
-		for (i = 0; i <= 28; i++)
-			sw_w32(0, 0xd57c + i * 0x80);
-	}
-	if (priv->id == 0x8380) {
-		for (i = 8; i <= 28; i++)
-			sw_w32(0, 0xd57c + i * 0x80);
-	}
-	return 0;
-}
-
-static int rtl838x_get_link_ksettings(struct net_device *ndev,
-				      struct ethtool_link_ksettings *cmd)
-{
-	struct rtl838x_eth_priv *priv = netdev_priv(ndev);
-
-	pr_debug("%s called\n", __func__);
-	return phylink_ethtool_ksettings_get(priv->phylink, cmd);
-}
-
-static int rtl838x_set_link_ksettings(struct net_device *ndev,
-				      const struct ethtool_link_ksettings *cmd)
-{
-	struct rtl838x_eth_priv *priv = netdev_priv(ndev);
-
-	pr_debug("%s called\n", __func__);
-	return phylink_ethtool_ksettings_set(priv->phylink, cmd);
-}
-
-static int rtl838x_mdio_read_paged(struct mii_bus *bus, int mii_id, u16 page, int regnum)
-{
-	u32 val;
-	int err;
-	struct rtl838x_eth_priv *priv = bus->priv;
-
-	if (mii_id >= 24 && mii_id <= 27 && priv->id == 0x8380)
-		return rtl838x_read_sds_phy(mii_id, regnum);
-
-	if (regnum & (MII_ADDR_C45 | MII_ADDR_C22_MMD)) {
-		err = rtl838x_read_mmd_phy(mii_id,
-					   mdiobus_c45_devad(regnum),
-					   regnum, &val);
-		pr_debug("MMD: %d dev %x register %x read %x, err %d\n", mii_id,
-			 mdiobus_c45_devad(regnum), mdiobus_c45_regad(regnum),
-			 val, err);
-	} else {
-		pr_debug("PHY: %d register %x read %x, err %d\n", mii_id, regnum, val, err);
-		err = rtl838x_read_phy(mii_id, page, regnum, &val);
-	}
-	if (err)
-		return err;
-	return val;
-}
-
-static int rtl838x_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-{
-	return rtl838x_mdio_read_paged(bus, mii_id, 0, regnum);
-}
-
-static int rtl839x_mdio_read_paged(struct mii_bus *bus, int mii_id, u16 page, int regnum)
-{
-	u32 val;
-	int err;
-	struct rtl838x_eth_priv *priv = bus->priv;
-
-	if (mii_id >= 48 && mii_id <= 49 && priv->id == 0x8393)
-		return rtl839x_read_sds_phy(mii_id, regnum);
-
-	if (regnum & (MII_ADDR_C45 | MII_ADDR_C22_MMD)) {
-		err = rtl839x_read_mmd_phy(mii_id,
-					   mdiobus_c45_devad(regnum),
-					   regnum, &val);
-		pr_debug("MMD: %d dev %x register %x read %x, err %d\n", mii_id,
-			 mdiobus_c45_devad(regnum), mdiobus_c45_regad(regnum),
-			 val, err);
-	} else {
-		err = rtl839x_read_phy(mii_id, page, regnum, &val);
-		pr_debug("PHY: %d register %x read %x, err %d\n", mii_id, regnum, val, err);
-	}
-		if (err)
-		return err;
-	return val;
-}
-
-static int rtl839x_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-{
-	return rtl839x_mdio_read_paged(bus, mii_id, 0, regnum);
-}
-
-static int rtl930x_mdio_read_paged(struct mii_bus *bus, int mii_id, u16 page, int regnum)
-{
-	u32 val;
-	int err;
-	struct rtl838x_eth_priv *priv = bus->priv;
-
-	if (priv->phy_is_internal[mii_id])
-		return rtl930x_read_sds_phy(priv->sds_id[mii_id], page, regnum);
-
-	if (regnum & (MII_ADDR_C45 | MII_ADDR_C22_MMD)) {
-		err = rtl930x_read_mmd_phy(mii_id,
-					   mdiobus_c45_devad(regnum),
-					   regnum, &val);
-		pr_debug("MMD: %d dev %x register %x read %x, err %d\n", mii_id,
-			 mdiobus_c45_devad(regnum), mdiobus_c45_regad(regnum),
-			 val, err);
-	} else {
-		err = rtl930x_read_phy(mii_id, page, regnum, &val);
-		pr_debug("PHY: %d register %x read %x, err %d\n", mii_id, regnum, val, err);
-	}
-	if (err)
-		return err;
-	return val;
-}
-
-static int rtl930x_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-{
-	return rtl930x_mdio_read_paged(bus, mii_id, 0, regnum);
-}
-
-static int rtl931x_mdio_read_paged(struct mii_bus *bus, int mii_id, u16 page, int regnum)
-{
-	u32 val;
-	int err, v;
-	struct rtl838x_eth_priv *priv = bus->priv;
-
-	pr_debug("%s: In here, port %d\n", __func__, mii_id);
-	if (priv->phy_is_internal[mii_id]) {
-		v = rtl931x_read_sds_phy(priv->sds_id[mii_id], page, regnum);
-		if (v < 0) {
-			err = v;
-		} else {
-			err = 0;
-			val = v;
-		}
-	} else {
-		if (regnum & (MII_ADDR_C45 | MII_ADDR_C22_MMD)) {
-			err = rtl931x_read_mmd_phy(mii_id,
-						   mdiobus_c45_devad(regnum),
-						   regnum, &val);
-			pr_debug("MMD: %d dev %x register %x read %x, err %d\n", mii_id,
-				 mdiobus_c45_devad(regnum), mdiobus_c45_regad(regnum),
-				 val, err);
-		} else {
-			err = rtl931x_read_phy(mii_id, page, regnum, &val);
-			pr_debug("PHY: %d register %x read %x, err %d\n", mii_id, regnum, val, err);
-		}
-	}
-
-	if (err)
-		return err;
-	return val;
-}
-
-static int rtl931x_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-{
-	return rtl931x_mdio_read_paged(bus, mii_id, 0, regnum);
-}
-
-static int rtl838x_mdio_write_paged(struct mii_bus *bus, int mii_id, u16 page,
-				    int regnum, u16 value)
-{
-	u32 offset = 0;
-	struct rtl838x_eth_priv *priv = bus->priv;
-	int err;
-
-	if (mii_id >= 24 && mii_id <= 27 && priv->id == 0x8380) {
-		if (mii_id == 26)
-			offset = 0x100;
-		sw_w32(value, RTL838X_SDS4_FIB_REG0 + offset + (regnum << 2));
-		return 0;
-	}
-
-	if (regnum & (MII_ADDR_C45 | MII_ADDR_C22_MMD)) {
-		err = rtl838x_write_mmd_phy(mii_id, mdiobus_c45_devad(regnum),
-					    regnum, value);
-		pr_debug("MMD: %d dev %x register %x write %x, err %d\n", mii_id,
-			 mdiobus_c45_devad(regnum), mdiobus_c45_regad(regnum),
-			 value, err);
-
-		return err;
-	}
-	err = rtl838x_write_phy(mii_id, page, regnum, value);
-	pr_debug("PHY: %d register %x write %x, err %d\n", mii_id, regnum, value, err);
-	return err;
-}
-
-static int rtl838x_mdio_write(struct mii_bus *bus, int mii_id,
-			      int regnum, u16 value)
-{
-	return rtl838x_mdio_write_paged(bus, mii_id, 0, regnum, value);
-}
-
-static int rtl839x_mdio_write_paged(struct mii_bus *bus, int mii_id, u16 page,
-				    int regnum, u16 value)
-{
-	struct rtl838x_eth_priv *priv = bus->priv;
-	int err;
-
-	if (mii_id >= 48 && mii_id <= 49 && priv->id == 0x8393)
-		return rtl839x_write_sds_phy(mii_id, regnum, value);
-
-	if (regnum & (MII_ADDR_C45 | MII_ADDR_C22_MMD)) {
-		err = rtl839x_write_mmd_phy(mii_id, mdiobus_c45_devad(regnum),
-					    regnum, value);
-		pr_debug("MMD: %d dev %x register %x write %x, err %d\n", mii_id,
-			 mdiobus_c45_devad(regnum), mdiobus_c45_regad(regnum),
-			 value, err);
-
-		return err;
-	}
-
-	err = rtl839x_write_phy(mii_id, page, regnum, value);
-	pr_debug("PHY: %d register %x write %x, err %d\n", mii_id, regnum, value, err);
-	return err;
-}
-
-static int rtl839x_mdio_write(struct mii_bus *bus, int mii_id,
-			      int regnum, u16 value)
-{
-	return rtl839x_mdio_write_paged(bus, mii_id, 0, regnum, value);
-}
-
-static int rtl930x_mdio_write_paged(struct mii_bus *bus, int mii_id, u16 page,
-				    int regnum, u16 value)
-{
-	struct rtl838x_eth_priv *priv = bus->priv;
-	int err;
-
-	if (priv->phy_is_internal[mii_id])
-		return rtl930x_write_sds_phy(priv->sds_id[mii_id], page, regnum, value);
-
-	if (regnum & (MII_ADDR_C45 | MII_ADDR_C22_MMD))
-		return rtl930x_write_mmd_phy(mii_id, mdiobus_c45_devad(regnum),
-					     regnum, value);
-
-	err = rtl930x_write_phy(mii_id, page, regnum, value);
-	pr_debug("PHY: %d register %x write %x, err %d\n", mii_id, regnum, value, err);
-	return err;
-}
-
-static int rtl930x_mdio_write(struct mii_bus *bus, int mii_id,
-			      int regnum, u16 value)
-{
-	return rtl930x_mdio_write_paged(bus, mii_id, 0, regnum, value);
-}
-
-static int rtl931x_mdio_write_paged(struct mii_bus *bus, int mii_id, u16 page,
-				    int regnum, u16 value)
-{
-	struct rtl838x_eth_priv *priv = bus->priv;
-	int err;
-
-	if (priv->phy_is_internal[mii_id])
-		return rtl931x_write_sds_phy(priv->sds_id[mii_id], page, regnum, value);
-
-	if (regnum & (MII_ADDR_C45 | MII_ADDR_C22_MMD)) {
-		err = rtl931x_write_mmd_phy(mii_id, mdiobus_c45_devad(regnum),
-					    regnum, value);
-		pr_debug("MMD: %d dev %x register %x write %x, err %d\n", mii_id,
-			 mdiobus_c45_devad(regnum), mdiobus_c45_regad(regnum),
-			 value, err);
-
-		return err;
-	}
-
-	err = rtl931x_write_phy(mii_id, page, regnum, value);
-	pr_debug("PHY: %d register %x write %x, err %d\n", mii_id, regnum, value, err);
-	return err;
-}
-
-static int rtl931x_mdio_write(struct mii_bus *bus, int mii_id,
-			      int regnum, u16 value)
-{
-	return rtl931x_mdio_write_paged(bus, mii_id, 0, regnum, value);
-}
-
-static int rtl838x_mdio_reset(struct mii_bus *bus)
-{
-	pr_debug("%s called\n", __func__);
-	/* Disable MAC polling the PHY so that we can start configuration */
-	sw_w32(0x00000000, RTL838X_SMI_POLL_CTRL);
-
-	/* Enable PHY control via SoC */
-	sw_w32_mask(0, 1 << 15, RTL838X_SMI_GLB_CTRL);
-
-	// Probably should reset all PHYs here...
-	return 0;
-}
-
-static int rtl839x_mdio_reset(struct mii_bus *bus)
-{
-	return 0;
-
-	pr_debug("%s called\n", __func__);
-	/* BUG: The following does not work, but should! */
-	/* Disable MAC polling the PHY so that we can start configuration */
-	sw_w32(0x00000000, RTL839X_SMI_PORT_POLLING_CTRL);
-	sw_w32(0x00000000, RTL839X_SMI_PORT_POLLING_CTRL + 4);
-	/* Disable PHY polling via SoC */
-	sw_w32_mask(1 << 7, 0, RTL839X_SMI_GLB_CTRL);
-
-	// Probably should reset all PHYs here...
-	return 0;
-}
-
-u8 mac_type_bit[RTL930X_CPU_PORT] = {0, 0, 0, 0, 2, 2, 2, 2, 4, 4, 4, 4, 6, 6, 6, 6,
-				     8, 8, 8, 8, 10, 10, 10, 10, 12, 15, 18, 21};
-
-static int rtl930x_mdio_reset(struct mii_bus *bus)
-{
-	int i;
-	int pos;
-	struct rtl838x_eth_priv *priv = bus->priv;
-	u32 c45_mask = 0;
-	u32 poll_sel[2];
-	u32 poll_ctrl = 0;
-	u32 private_poll_mask = 0;
-	u32 v;
-	bool uses_usxgmii = false; // For the Aquantia PHYs
-	bool uses_hisgmii = false; // For the RTL8221/8226
-
-	// Mapping of port to phy-addresses on an SMI bus
-	poll_sel[0] = poll_sel[1] = 0;
-	for (i = 0; i < RTL930X_CPU_PORT; i++) {
-		if (priv->smi_bus[i] > 3)
-			continue;
-		pos = (i % 6) * 5;
-		sw_w32_mask(0x1f << pos, priv->smi_addr[i] << pos,
-			    RTL930X_SMI_PORT0_5_ADDR + (i / 6) * 4);
-
-		pos = (i * 2) % 32;
-		poll_sel[i / 16] |= priv->smi_bus[i] << pos;
-		poll_ctrl |= BIT(20 + priv->smi_bus[i]);
-	}
-
-	// Configure which SMI bus is behind which port number
-	sw_w32(poll_sel[0], RTL930X_SMI_PORT0_15_POLLING_SEL);
-	sw_w32(poll_sel[1], RTL930X_SMI_PORT16_27_POLLING_SEL);
-
-	// Disable POLL_SEL for any SMI bus with a normal PHY (not RTL8295R for SFP+)
-	sw_w32_mask(poll_ctrl, 0, RTL930X_SMI_GLB_CTRL);
-
-	// Configure which SMI busses are polled in c45 based on a c45 PHY being on that bus
-	for (i = 0; i < 4; i++)
-		if (priv->smi_bus_isc45[i])
-			c45_mask |= BIT(i + 16);
-
-	pr_info("c45_mask: %08x\n", c45_mask);
-	sw_w32_mask(0, c45_mask, RTL930X_SMI_GLB_CTRL);
-
-	// Set the MAC type of each port according to the PHY-interface
-	// Values are FE: 2, GE: 3, XGE/2.5G: 0(SERDES) or 1(otherwise), SXGE: 0
-	v = 0;
-	for (i = 0; i < RTL930X_CPU_PORT; i++) {
-		switch (priv->interfaces[i]) {
-		case PHY_INTERFACE_MODE_10GBASER:
-			break;			// Serdes: Value = 0
-
-		case PHY_INTERFACE_MODE_HSGMII:
-			private_poll_mask |= BIT(i);
-			// fallthrough
-		case PHY_INTERFACE_MODE_USXGMII:
-			v |= BIT(mac_type_bit[i]);
-			uses_usxgmii = true;
-			break;
-
-		case PHY_INTERFACE_MODE_QSGMII:
-			private_poll_mask |= BIT(i);
-			v |= 3 << mac_type_bit[i];
-			break;
-
-		default:
-			break;
-		}
-	}
-	sw_w32(v, RTL930X_SMI_MAC_TYPE_CTRL);
-
-	// Set the private polling mask for all Realtek PHYs (i.e. not the 10GBit Aquantia ones)
-	sw_w32(private_poll_mask, RTL930X_SMI_PRVTE_POLLING_CTRL);
-
-	/* The following magic values are found in the port configuration, they seem to
-	 * define different ways of polling a PHY. The below is for the Aquantia PHYs of
-	 * the XGS1250 and the RTL8226 of the XGS1210 */
-	if (uses_usxgmii) {
-		sw_w32(0x01010000, RTL930X_SMI_10GPHY_POLLING_REG0_CFG);
-		sw_w32(0x01E7C400, RTL930X_SMI_10GPHY_POLLING_REG9_CFG);
-		sw_w32(0x01E7E820, RTL930X_SMI_10GPHY_POLLING_REG10_CFG);
-	}
-	if (uses_hisgmii) {
-		sw_w32(0x011FA400, RTL930X_SMI_10GPHY_POLLING_REG0_CFG);
-		sw_w32(0x013FA412, RTL930X_SMI_10GPHY_POLLING_REG9_CFG);
-		sw_w32(0x017FA414, RTL930X_SMI_10GPHY_POLLING_REG10_CFG);
-	}
-
-	pr_debug("%s: RTL930X_SMI_GLB_CTRL %08x\n", __func__,
-		 sw_r32(RTL930X_SMI_GLB_CTRL));
-	pr_debug("%s: RTL930X_SMI_PORT0_15_POLLING_SEL %08x\n", __func__,
-		 sw_r32(RTL930X_SMI_PORT0_15_POLLING_SEL));
-	pr_debug("%s: RTL930X_SMI_PORT16_27_POLLING_SEL %08x\n", __func__,
-		 sw_r32(RTL930X_SMI_PORT16_27_POLLING_SEL));
-	pr_debug("%s: RTL930X_SMI_MAC_TYPE_CTRL %08x\n", __func__,
-		 sw_r32(RTL930X_SMI_MAC_TYPE_CTRL));
-	pr_debug("%s: RTL930X_SMI_10GPHY_POLLING_REG0_CFG %08x\n", __func__,
-		 sw_r32(RTL930X_SMI_10GPHY_POLLING_REG0_CFG));
-	pr_debug("%s: RTL930X_SMI_10GPHY_POLLING_REG9_CFG %08x\n", __func__,
-		 sw_r32(RTL930X_SMI_10GPHY_POLLING_REG9_CFG));
-	pr_debug("%s: RTL930X_SMI_10GPHY_POLLING_REG10_CFG %08x\n", __func__,
-		 sw_r32(RTL930X_SMI_10GPHY_POLLING_REG10_CFG));
-	pr_debug("%s: RTL930X_SMI_PRVTE_POLLING_CTRL %08x\n", __func__,
-		 sw_r32(RTL930X_SMI_PRVTE_POLLING_CTRL));
-	return 0;
-}
-
-static int rtl931x_mdio_reset(struct mii_bus *bus)
-{
-	int i;
-	int pos;
-	struct rtl838x_eth_priv *priv = bus->priv;
-	u32 c45_mask = 0;
-	u32 poll_sel[4];
-	u32 poll_ctrl = 0;
-	bool mdc_on[4];
-
-	pr_info("%s called\n", __func__);
-	// Disable port polling for configuration purposes
-	sw_w32(0, RTL931X_SMI_PORT_POLLING_CTRL);
-	sw_w32(0, RTL931X_SMI_PORT_POLLING_CTRL + 4);
-	msleep(100);
-
-	mdc_on[0] = mdc_on[1] = mdc_on[2] = mdc_on[3] = false;
-	// Mapping of port to phy-addresses on an SMI bus
-	poll_sel[0] = poll_sel[1] = poll_sel[2] = poll_sel[3] = 0;
-	for (i = 0; i < 56; i++) {
-		pos = (i % 6) * 5;
-		sw_w32_mask(0x1f << pos, priv->smi_addr[i] << pos, RTL931X_SMI_PORT_ADDR + (i / 6) * 4);
-		pos = (i * 2) % 32;
-		poll_sel[i / 16] |= priv->smi_bus[i] << pos;
-		poll_ctrl |= BIT(20 + priv->smi_bus[i]);
-		mdc_on[priv->smi_bus[i]] = true;
-	}
-
-	// Configure which SMI bus is behind which port number
-	for (i = 0; i < 4; i++) {
-		pr_info("poll sel %d, %08x\n", i, poll_sel[i]);
-		sw_w32(poll_sel[i], RTL931X_SMI_PORT_POLLING_SEL + (i * 4));
-	}
-
-	// Configure which SMI busses
-	pr_info("%s: WAS RTL931X_MAC_L2_GLOBAL_CTRL2 %08x\n", __func__, sw_r32(RTL931X_MAC_L2_GLOBAL_CTRL2));
-	pr_info("c45_mask: %08x, RTL931X_SMI_GLB_CTRL0 was %X", c45_mask, sw_r32(RTL931X_SMI_GLB_CTRL0));
-	for (i = 0; i < 4; i++) {
-		// bus is polled in c45
-		if (priv->smi_bus_isc45[i])
-			c45_mask |= 0x2 << (i * 2);  // Std. C45, non-standard is 0x3
-		// Enable bus access via MDC
-		if (mdc_on[i])
-			sw_w32_mask(0, BIT(9 + i), RTL931X_MAC_L2_GLOBAL_CTRL2);
-	}
-
-	pr_info("%s: RTL931X_MAC_L2_GLOBAL_CTRL2 %08x\n", __func__, sw_r32(RTL931X_MAC_L2_GLOBAL_CTRL2));
-	pr_info("c45_mask: %08x, RTL931X_SMI_GLB_CTRL0 was %X", c45_mask, sw_r32(RTL931X_SMI_GLB_CTRL0));
-
-	/* We have a 10G PHY enable polling
-	sw_w32(0x01010000, RTL931X_SMI_10GPHY_POLLING_SEL2);
-	sw_w32(0x01E7C400, RTL931X_SMI_10GPHY_POLLING_SEL3);
-	sw_w32(0x01E7E820, RTL931X_SMI_10GPHY_POLLING_SEL4);
-*/
-	sw_w32_mask(0xff, c45_mask, RTL931X_SMI_GLB_CTRL1);
-
-	return 0;
-}
-
-static int rtl931x_chip_init(struct rtl838x_eth_priv *priv)
-{
-	pr_info("In %s\n", __func__);
-
-	// Initialize Encapsulation memory and wait until finished
-	sw_w32(0x1, RTL931X_MEM_ENCAP_INIT);
-	do { } while (sw_r32(RTL931X_MEM_ENCAP_INIT) & 1);
-	pr_info("%s: init ENCAP done\n", __func__);
-
-	// Initialize Managemen Information Base memory and wait until finished
-	sw_w32(0x1, RTL931X_MEM_MIB_INIT);
-	do { } while (sw_r32(RTL931X_MEM_MIB_INIT) & 1);
-	pr_info("%s: init MIB done\n", __func__);
-
-	// Initialize ACL (PIE) memory and wait until finished
-	sw_w32(0x1, RTL931X_MEM_ACL_INIT);
-	do { } while (sw_r32(RTL931X_MEM_ACL_INIT) & 1);
-	pr_info("%s: init ACL done\n", __func__);
-
-	// Initialize ALE memory and wait until finished
-	sw_w32(0xFFFFFFFF, RTL931X_MEM_ALE_INIT_0);
-	do { } while (sw_r32(RTL931X_MEM_ALE_INIT_0));
-	sw_w32(0x7F, RTL931X_MEM_ALE_INIT_1);
-	sw_w32(0x7ff, RTL931X_MEM_ALE_INIT_2);
-	do { } while (sw_r32(RTL931X_MEM_ALE_INIT_2) & 0x7ff);
-	pr_info("%s: init ALE done\n", __func__);
-
-	// Enable ESD auto recovery
-	sw_w32(0x1, RTL931X_MDX_CTRL_RSVD);
-
-	// Init SPI, is this for thermal control or what?
-	sw_w32_mask(0x7 << 11, 0x2 << 11, RTL931X_SPI_CTRL0);
-
-	return 0;
-}
-
-static int rtl838x_mdio_init(struct rtl838x_eth_priv *priv)
-{
-	struct device_node *mii_np, *dn;
-	u32 pn;
-	int ret;
-
-	pr_debug("%s called\n", __func__);
-	mii_np = of_get_child_by_name(priv->pdev->dev.of_node, "mdio-bus");
-
-	if (!mii_np) {
-		dev_err(&priv->pdev->dev, "no %s child node found", "mdio-bus");
-		return -ENODEV;
-	}
-
-	if (!of_device_is_available(mii_np)) {
-		ret = -ENODEV;
-		goto err_put_node;
-	}
-
-	priv->mii_bus = devm_mdiobus_alloc(&priv->pdev->dev);
-	if (!priv->mii_bus) {
-		ret = -ENOMEM;
-		goto err_put_node;
-	}
-
-	switch(priv->family_id) {
-	case RTL8380_FAMILY_ID:
-		priv->mii_bus->name = "rtl838x-eth-mdio";
-		priv->mii_bus->read = rtl838x_mdio_read;
-		priv->mii_bus->read_paged = rtl838x_mdio_read_paged;
-		priv->mii_bus->write = rtl838x_mdio_write;
-		priv->mii_bus->write_paged = rtl838x_mdio_write_paged;
-		priv->mii_bus->reset = rtl838x_mdio_reset;
-		break;
-	case RTL8390_FAMILY_ID:
-		priv->mii_bus->name = "rtl839x-eth-mdio";
-		priv->mii_bus->read = rtl839x_mdio_read;
-		priv->mii_bus->read_paged = rtl839x_mdio_read_paged;
-		priv->mii_bus->write = rtl839x_mdio_write;
-		priv->mii_bus->write_paged = rtl839x_mdio_write_paged;
-		priv->mii_bus->reset = rtl839x_mdio_reset;
-		break;
-	case RTL9300_FAMILY_ID:
-		priv->mii_bus->name = "rtl930x-eth-mdio";
-		priv->mii_bus->read = rtl930x_mdio_read;
-		priv->mii_bus->read_paged = rtl930x_mdio_read_paged;
-		priv->mii_bus->write = rtl930x_mdio_write;
-		priv->mii_bus->write_paged = rtl930x_mdio_write_paged;
-		priv->mii_bus->reset = rtl930x_mdio_reset;
-		priv->mii_bus->probe_capabilities = MDIOBUS_C22_C45;
-		break;
-	case RTL9310_FAMILY_ID:
-		priv->mii_bus->name = "rtl931x-eth-mdio";
-		priv->mii_bus->read = rtl931x_mdio_read;
-		priv->mii_bus->read_paged = rtl931x_mdio_read_paged;
-		priv->mii_bus->write = rtl931x_mdio_write;
-		priv->mii_bus->write_paged = rtl931x_mdio_write_paged;
-		priv->mii_bus->reset = rtl931x_mdio_reset;
-		priv->mii_bus->probe_capabilities = MDIOBUS_C22_C45;
-		break;
-	}
-	priv->mii_bus->access_capabilities = MDIOBUS_ACCESS_C22_MMD;
-	priv->mii_bus->priv = priv;
-	priv->mii_bus->parent = &priv->pdev->dev;
-
-	for_each_node_by_name(dn, "ethernet-phy") {
-		u32 smi_addr[2];
-
-		if (of_property_read_u32(dn, "reg", &pn))
-			continue;
-
-		if (of_property_read_u32_array(dn, "rtl9300,smi-address", &smi_addr[0], 2)) {
-			smi_addr[0] = 0;
-			smi_addr[1] = pn;
-		}
-
-		if (of_property_read_u32(dn, "sds", &priv->sds_id[pn]))
-			priv->sds_id[pn] = -1;
-		else {
-			pr_info("set sds port %d to %d\n", pn, priv->sds_id[pn]);
-		}
-
-		if (pn < MAX_PORTS) {
-			priv->smi_bus[pn] = smi_addr[0];
-			priv->smi_addr[pn] = smi_addr[1];
-		} else {
-			pr_err("%s: illegal port number %d\n", __func__, pn);
-		}
-
-		if (of_device_is_compatible(dn, "ethernet-phy-ieee802.3-c45"))
-			priv->smi_bus_isc45[smi_addr[0]] = true;
-
-		if (of_property_read_bool(dn, "phy-is-integrated")) {
-			priv->phy_is_internal[pn] = true;
-		}
-	}
-
-	dn = of_find_compatible_node(NULL, NULL, "realtek,rtl83xx-switch");
-	if (!dn) {
-		dev_err(&priv->pdev->dev, "No RTL switch node in DTS\n");
-		return -ENODEV;
-	}
-
-	for_each_node_by_name(dn, "port") {
-		if (of_property_read_u32(dn, "reg", &pn))
-			continue;
-		pr_debug("%s Looking at port %d\n", __func__, pn);
-		if (pn > priv->cpu_port)
-			continue;
-		if (of_get_phy_mode(dn, &priv->interfaces[pn]))
-			priv->interfaces[pn] = PHY_INTERFACE_MODE_NA;
-		pr_debug("%s phy mode of port %d is %s\n", __func__, pn, phy_modes(priv->interfaces[pn]));
-	}
-
-	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%pOFn", mii_np);
-	ret = of_mdiobus_register(priv->mii_bus, mii_np);
-
-err_put_node:
-	of_node_put(mii_np);
-	return ret;
-}
-
-static int rtl838x_mdio_remove(struct rtl838x_eth_priv *priv)
-{
-	pr_debug("%s called\n", __func__);
-	if (!priv->mii_bus)
-		return 0;
-
-	mdiobus_unregister(priv->mii_bus);
-	mdiobus_free(priv->mii_bus);
-
-	return 0;
-}
-
-static netdev_features_t rtl838x_fix_features(struct net_device *dev,
-					  netdev_features_t features)
-{
-	return features;
-}
-
-static int rtl83xx_set_features(struct net_device *dev, netdev_features_t features)
-{
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-
-	if ((features ^ dev->features) & NETIF_F_RXCSUM) {
-		if (!(features & NETIF_F_RXCSUM))
-			sw_w32_mask(BIT(3), 0, priv->r->mac_port_ctrl(priv->cpu_port));
-		else
-			sw_w32_mask(0, BIT(3), priv->r->mac_port_ctrl(priv->cpu_port));
-	}
-
-	return 0;
-}
-
-static int rtl93xx_set_features(struct net_device *dev, netdev_features_t features)
-{
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-
-	if ((features ^ dev->features) & NETIF_F_RXCSUM) {
-		if (!(features & NETIF_F_RXCSUM))
-			sw_w32_mask(BIT(4), 0, priv->r->mac_port_ctrl(priv->cpu_port));
-		else
-			sw_w32_mask(0, BIT(4), priv->r->mac_port_ctrl(priv->cpu_port));
-	}
-
-	return 0;
-}
-
-static const struct net_device_ops rtl838x_eth_netdev_ops = {
-	.ndo_open = rtl838x_eth_open,
-	.ndo_stop = rtl838x_eth_stop,
-	.ndo_start_xmit = rtl838x_eth_tx,
-	.ndo_select_queue = rtl83xx_pick_tx_queue,
-	.ndo_set_mac_address = rtl838x_set_mac_address,
-	.ndo_validate_addr = eth_validate_addr,
-	.ndo_set_rx_mode = rtl838x_eth_set_multicast_list,
-	.ndo_tx_timeout = rtl838x_eth_tx_timeout,
-	.ndo_set_features = rtl83xx_set_features,
-	.ndo_fix_features = rtl838x_fix_features,
-	.ndo_setup_tc = rtl83xx_setup_tc,
-};
-
-static const struct net_device_ops rtl839x_eth_netdev_ops = {
-	.ndo_open = rtl838x_eth_open,
-	.ndo_stop = rtl838x_eth_stop,
-	.ndo_start_xmit = rtl838x_eth_tx,
-	.ndo_select_queue = rtl83xx_pick_tx_queue,
-	.ndo_set_mac_address = rtl838x_set_mac_address,
-	.ndo_validate_addr = eth_validate_addr,
-	.ndo_set_rx_mode = rtl839x_eth_set_multicast_list,
-	.ndo_tx_timeout = rtl838x_eth_tx_timeout,
-	.ndo_set_features = rtl83xx_set_features,
-	.ndo_fix_features = rtl838x_fix_features,
-	.ndo_setup_tc = rtl83xx_setup_tc,
-};
-
-static const struct net_device_ops rtl930x_eth_netdev_ops = {
-	.ndo_open = rtl838x_eth_open,
-	.ndo_stop = rtl838x_eth_stop,
-	.ndo_start_xmit = rtl838x_eth_tx,
-	.ndo_select_queue = rtl93xx_pick_tx_queue,
-	.ndo_set_mac_address = rtl838x_set_mac_address,
-	.ndo_validate_addr = eth_validate_addr,
-	.ndo_set_rx_mode = rtl930x_eth_set_multicast_list,
-	.ndo_tx_timeout = rtl838x_eth_tx_timeout,
-	.ndo_set_features = rtl93xx_set_features,
-	.ndo_fix_features = rtl838x_fix_features,
-	.ndo_setup_tc = rtl83xx_setup_tc,
-};
-
-static const struct net_device_ops rtl931x_eth_netdev_ops = {
-	.ndo_open = rtl838x_eth_open,
-	.ndo_stop = rtl838x_eth_stop,
-	.ndo_start_xmit = rtl838x_eth_tx,
-	.ndo_select_queue = rtl93xx_pick_tx_queue,
-	.ndo_set_mac_address = rtl838x_set_mac_address,
-	.ndo_validate_addr = eth_validate_addr,
-	.ndo_set_rx_mode = rtl931x_eth_set_multicast_list,
-	.ndo_tx_timeout = rtl838x_eth_tx_timeout,
-	.ndo_set_features = rtl93xx_set_features,
-	.ndo_fix_features = rtl838x_fix_features,
-};
-
-static const struct phylink_mac_ops rtl838x_phylink_ops = {
-	.validate = rtl838x_validate,
-	.mac_pcs_get_state = rtl838x_mac_pcs_get_state,
-	.mac_an_restart = rtl838x_mac_an_restart,
-	.mac_config = rtl838x_mac_config,
-	.mac_link_down = rtl838x_mac_link_down,
-	.mac_link_up = rtl838x_mac_link_up,
-};
-
-static const struct ethtool_ops rtl838x_ethtool_ops = {
-	.get_link_ksettings     = rtl838x_get_link_ksettings,
-	.set_link_ksettings     = rtl838x_set_link_ksettings,
-};
-
-static int __init rtl838x_eth_probe(struct platform_device *pdev)
-{
-	struct net_device *dev;
-	struct device_node *dn = pdev->dev.of_node;
-	struct rtl838x_eth_priv *priv;
-	struct resource *res, *mem;
-	phy_interface_t phy_mode;
-	struct phylink *phylink;
-	int err = 0, i, rxrings, rxringlen;
-	struct ring_b *ring;
-
-	pr_info("Probing RTL838X eth device pdev: %x, dev: %x\n",
-		(u32)pdev, (u32)(&(pdev->dev)));
-
-	if (!dn) {
-		dev_err(&pdev->dev, "No DT found\n");
-		return -EINVAL;
-	}
-
-	rxrings = (soc_info.family == RTL8380_FAMILY_ID 
-			|| soc_info.family == RTL8390_FAMILY_ID) ? 8 : 32;
-	rxrings = rxrings > MAX_RXRINGS ? MAX_RXRINGS : rxrings;
-	rxringlen = MAX_ENTRIES / rxrings;
-	rxringlen = rxringlen > MAX_RXLEN ? MAX_RXLEN : rxringlen;
-
-	dev = alloc_etherdev_mqs(sizeof(struct rtl838x_eth_priv), TXRINGS, rxrings);
-	if (!dev) {
-		err = -ENOMEM;
-		goto err_free;
-	}
-	SET_NETDEV_DEV(dev, &pdev->dev);
-	priv = netdev_priv(dev);
-
-	/* obtain buffer memory space */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res) {
-		mem = devm_request_mem_region(&pdev->dev, res->start,
-			resource_size(res), res->name);
-		if (!mem) {
-			dev_err(&pdev->dev, "cannot request memory space\n");
-			err = -ENXIO;
-			goto err_free;
-		}
-
-		dev->mem_start = mem->start;
-		dev->mem_end   = mem->end;
-	} else {
-		dev_err(&pdev->dev, "cannot request IO resource\n");
-		err = -ENXIO;
-		goto err_free;
-	}
-
-	/* Allocate buffer memory */
-	priv->membase = dmam_alloc_coherent(&pdev->dev, rxrings * rxringlen * RING_BUFFER
-				+ sizeof(struct ring_b) + sizeof(struct notify_b),
-				(void *)&dev->mem_start, GFP_KERNEL);
-	if (!priv->membase) {
-		dev_err(&pdev->dev, "cannot allocate DMA buffer\n");
-		err = -ENOMEM;
-		goto err_free;
-	}
-
-	// Allocate ring-buffer space at the end of the allocated memory
-	ring = priv->membase;
-	ring->rx_space = priv->membase + sizeof(struct ring_b) + sizeof(struct notify_b);
-
-	spin_lock_init(&priv->lock);
-
-	dev->ethtool_ops = &rtl838x_ethtool_ops;
-	dev->min_mtu = ETH_ZLEN;
-	dev->max_mtu = 1536;
-	dev->features = NETIF_F_RXCSUM | NETIF_F_HW_CSUM;
-	dev->hw_features = NETIF_F_RXCSUM;
-
-	priv->id = soc_info.id;
-	priv->family_id = soc_info.family;
-	if (priv->id) {
-		pr_info("Found SoC ID: %4x: %s, family %x\n",
-			priv->id, soc_info.name, priv->family_id);
-	} else {
-		pr_err("Unknown chip id (%04x)\n", priv->id);
-		return -ENODEV;
-	}
-
-	switch (priv->family_id) {
-	case RTL8380_FAMILY_ID:
-		priv->cpu_port = RTL838X_CPU_PORT;
-		priv->r = &rtl838x_reg;
-		dev->netdev_ops = &rtl838x_eth_netdev_ops;
-		break;
-	case RTL8390_FAMILY_ID:
-		priv->cpu_port = RTL839X_CPU_PORT;
-		priv->r = &rtl839x_reg;
-		dev->netdev_ops = &rtl839x_eth_netdev_ops;
-		break;
-	case RTL9300_FAMILY_ID:
-		priv->cpu_port = RTL930X_CPU_PORT;
-		priv->r = &rtl930x_reg;
-		dev->netdev_ops = &rtl930x_eth_netdev_ops;
-		break;
-	case RTL9310_FAMILY_ID:
-		priv->cpu_port = RTL931X_CPU_PORT;
-		priv->r = &rtl931x_reg;
-		dev->netdev_ops = &rtl931x_eth_netdev_ops;
-		rtl931x_chip_init(priv);
-		break;
-	default:
-		pr_err("Unknown SoC family\n");
-		return -ENODEV;
-	}
-	priv->rxringlen = rxringlen;
-	priv->rxrings = rxrings;
-
-	/* Obtain device IRQ number */
-	dev->irq = platform_get_irq(pdev, 0);
-	if (dev->irq < 0) {
-		dev_err(&pdev->dev, "cannot obtain network-device IRQ\n");
-		goto err_free;
-	}
-
-	err = devm_request_irq(&pdev->dev, dev->irq, priv->r->net_irq,
-			       IRQF_SHARED, dev->name, dev);
-	if (err) {
-		dev_err(&pdev->dev, "%s: could not acquire interrupt: %d\n",
-			   __func__, err);
-		goto err_free;
-	}
-
-	rtl8380_init_mac(priv);
-
-	/* try to get mac address in the following order:
-	 * 1) from device tree data
-	 * 2) from internal registers set by bootloader
-	 */
-	of_get_mac_address(pdev->dev.of_node, dev->dev_addr);
-	if (is_valid_ether_addr(dev->dev_addr)) {
-		rtl838x_set_mac_hw(dev, (u8 *)dev->dev_addr);
-	} else {
-		dev->dev_addr[0] = (sw_r32(priv->r->mac) >> 8) & 0xff;
-		dev->dev_addr[1] = sw_r32(priv->r->mac) & 0xff;
-		dev->dev_addr[2] = (sw_r32(priv->r->mac + 4) >> 24) & 0xff;
-		dev->dev_addr[3] = (sw_r32(priv->r->mac + 4) >> 16) & 0xff;
-		dev->dev_addr[4] = (sw_r32(priv->r->mac + 4) >> 8) & 0xff;
-		dev->dev_addr[5] = sw_r32(priv->r->mac + 4) & 0xff;
-	}
-	/* if the address is invalid, use a random value */
-	if (!is_valid_ether_addr(dev->dev_addr)) {
-		struct sockaddr sa = { AF_UNSPEC };
-
-		netdev_warn(dev, "Invalid MAC address, using random\n");
-		eth_hw_addr_random(dev);
-		memcpy(sa.sa_data, dev->dev_addr, ETH_ALEN);
-		if (rtl838x_set_mac_address(dev, &sa))
-			netdev_warn(dev, "Failed to set MAC address.\n");
-	}
-	pr_info("Using MAC %08x%08x\n", sw_r32(priv->r->mac),
-					sw_r32(priv->r->mac + 4));
-	strcpy(dev->name, "eth%d");
-	priv->pdev = pdev;
-	priv->netdev = dev;
-
-	err = rtl838x_mdio_init(priv);
-	if (err)
-		goto err_free;
-
-	err = register_netdev(dev);
-	if (err)
-		goto err_free;
-
-	for (i = 0; i < priv->rxrings; i++) {
-		priv->rx_qs[i].id = i;
-		priv->rx_qs[i].priv = priv;
-		netif_napi_add(dev, &priv->rx_qs[i].napi, rtl838x_poll_rx, 64);
-	}
-
-	platform_set_drvdata(pdev, dev);
-
-	phy_mode = PHY_INTERFACE_MODE_NA;
-	err = of_get_phy_mode(dn, &phy_mode);
-	if (err < 0) {
-		dev_err(&pdev->dev, "incorrect phy-mode\n");
-		err = -EINVAL;
-		goto err_free;
-	}
-	priv->phylink_config.dev = &dev->dev;
-	priv->phylink_config.type = PHYLINK_NETDEV;
-
-	phylink = phylink_create(&priv->phylink_config, pdev->dev.fwnode,
-				 phy_mode, &rtl838x_phylink_ops);
-
-	if (IS_ERR(phylink)) {
-		err = PTR_ERR(phylink);
-		goto err_free;
-	}
-	priv->phylink = phylink;
-
-	return 0;
-
-err_free:
-	pr_err("Error setting up netdev, freeing it again.\n");
-	free_netdev(dev);
-	return err;
-}
-
-static int rtl838x_eth_remove(struct platform_device *pdev)
-{
-	struct net_device *dev = platform_get_drvdata(pdev);
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
-	int i;
-
-	if (dev) {
-		pr_info("Removing platform driver for rtl838x-eth\n");
-		rtl838x_mdio_remove(priv);
-		rtl838x_hw_stop(priv);
-
-		netif_tx_stop_all_queues(dev);
-
-		for (i = 0; i < priv->rxrings; i++)
-			netif_napi_del(&priv->rx_qs[i].napi);
-
-		unregister_netdev(dev);
-		free_netdev(dev);
-	}
-	return 0;
-}
-
-static const struct of_device_id rtl838x_eth_of_ids[] = {
-	{ .compatible = "realtek,rtl838x-eth"},
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, rtl838x_eth_of_ids);
-
-static struct platform_driver rtl838x_eth_driver = {
-	.probe = rtl838x_eth_probe,
-	.remove = rtl838x_eth_remove,
-	.driver = {
-		.name = "rtl838x-eth",
-		.pm = NULL,
-		.of_match_table = rtl838x_eth_of_ids,
-	},
-};
-
-module_platform_driver(rtl838x_eth_driver);
-
-MODULE_AUTHOR("B. Koblitz");
-MODULE_DESCRIPTION("RTL838X SoC Ethernet Driver");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h
deleted file mode 100644
index d00d11d0c823..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h
+++ /dev/null
@@ -1,457 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef _RTL838X_ETH_H
-#define _RTL838X_ETH_H
-
-/*
- * Register definition
- */
-
-/* Per port MAC control */
-#define RTL838X_MAC_PORT_CTRL			(0xd560)
-#define RTL839X_MAC_PORT_CTRL			(0x8004)
-#define RTL930X_MAC_L2_PORT_CTRL		(0x3268)
-#define RTL930X_MAC_PORT_CTRL			(0x3260)
-#define RTL931X_MAC_L2_PORT_CTRL		(0x6000)
-#define RTL931X_MAC_PORT_CTRL			(0x6004)
-
-/* DMA interrupt control and status registers */
-#define RTL838X_DMA_IF_CTRL			(0x9f58)
-#define RTL838X_DMA_IF_INTR_STS			(0x9f54)
-#define RTL838X_DMA_IF_INTR_MSK			(0x9f50)
-
-#define RTL839X_DMA_IF_CTRL			(0x786c)
-#define RTL839X_DMA_IF_INTR_STS			(0x7868)
-#define RTL839X_DMA_IF_INTR_MSK			(0x7864)
-
-#define RTL930X_DMA_IF_CTRL			(0xe028)
-#define RTL930X_DMA_IF_INTR_RX_RUNOUT_STS	(0xe01C)
-#define RTL930X_DMA_IF_INTR_RX_DONE_STS		(0xe020)
-#define RTL930X_DMA_IF_INTR_TX_DONE_STS		(0xe024)
-#define RTL930X_DMA_IF_INTR_RX_RUNOUT_MSK	(0xe010)
-#define RTL930X_DMA_IF_INTR_RX_DONE_MSK		(0xe014)
-#define RTL930X_DMA_IF_INTR_TX_DONE_MSK		(0xe018)
-#define RTL930X_L2_NTFY_IF_INTR_MSK		(0xe04C)
-#define RTL930X_L2_NTFY_IF_INTR_STS		(0xe050)
-
-/* TODO: RTL931X_DMA_IF_CTRL has different bits meanings */
-#define RTL931X_DMA_IF_CTRL			(0x0928)
-#define RTL931X_DMA_IF_INTR_RX_RUNOUT_STS	(0x091c)
-#define RTL931X_DMA_IF_INTR_RX_DONE_STS		(0x0920)
-#define RTL931X_DMA_IF_INTR_TX_DONE_STS		(0x0924)
-#define RTL931X_DMA_IF_INTR_RX_RUNOUT_MSK	(0x0910)
-#define RTL931X_DMA_IF_INTR_RX_DONE_MSK		(0x0914)
-#define RTL931X_DMA_IF_INTR_TX_DONE_MSK		(0x0918)
-#define RTL931X_L2_NTFY_IF_INTR_MSK		(0x09E4)
-#define RTL931X_L2_NTFY_IF_INTR_STS		(0x09E8)
-
-#define RTL838X_MAC_FORCE_MODE_CTRL		(0xa104)
-#define RTL839X_MAC_FORCE_MODE_CTRL		(0x02bc)
-#define RTL930X_MAC_FORCE_MODE_CTRL		(0xCA1C)
-#define RTL931X_MAC_FORCE_MODE_CTRL		(0x0ddc)
-
-/* MAC address settings */
-#define RTL838X_MAC				(0xa9ec)
-#define RTL839X_MAC				(0x02b4)
-#define RTL838X_MAC_ALE				(0x6b04)
-#define RTL838X_MAC2				(0xa320)
-#define RTL930X_MAC_L2_ADDR_CTRL		(0xC714)
-#define RTL931X_MAC_L2_ADDR_CTRL		(0x135c)
-
-/* Ringbuffer setup */
-#define RTL838X_DMA_RX_BASE			(0x9f00)
-#define RTL839X_DMA_RX_BASE			(0x780c)
-#define RTL930X_DMA_RX_BASE			(0xdf00)
-#define RTL931X_DMA_RX_BASE			(0x0800)
-
-#define RTL838X_DMA_TX_BASE			(0x9f40)
-#define RTL839X_DMA_TX_BASE			(0x784c)
-#define RTL930X_DMA_TX_BASE			(0xe000)
-#define RTL931X_DMA_TX_BASE			(0x0900)
-
-#define RTL838X_DMA_IF_RX_RING_SIZE		(0xB7E4)
-#define RTL839X_DMA_IF_RX_RING_SIZE		(0x6038)
-#define RTL930X_DMA_IF_RX_RING_SIZE		(0x7C60)
-#define RTL931X_DMA_IF_RX_RING_SIZE		(0x2080)
-
-#define RTL838X_DMA_IF_RX_RING_CNTR		(0xB7E8)
-#define RTL839X_DMA_IF_RX_RING_CNTR		(0x603c)
-#define RTL930X_DMA_IF_RX_RING_CNTR		(0x7C8C)
-#define RTL931X_DMA_IF_RX_RING_CNTR		(0x20AC)
-
-#define RTL838X_DMA_IF_RX_CUR			(0x9F20)
-#define RTL839X_DMA_IF_RX_CUR			(0x782c)
-#define RTL930X_DMA_IF_RX_CUR			(0xdf80)
-#define RTL931X_DMA_IF_RX_CUR			(0x0880)
-
-#define RTL838X_DMA_IF_TX_CUR_DESC_ADDR_CTRL	(0x9F48)
-#define RTL930X_DMA_IF_TX_CUR_DESC_ADDR_CTRL	(0xE008)
-
-#define RTL838X_DMY_REG31			(0x3b28)
-#define RTL838X_SDS_MODE_SEL			(0x0028)
-#define RTL838X_SDS_CFG_REG			(0x0034)
-#define RTL838X_INT_MODE_CTRL			(0x005c)
-#define RTL838X_CHIP_INFO			(0x00d8)
-#define RTL838X_SDS4_REG28			(0xef80)
-#define RTL838X_SDS4_DUMMY0			(0xef8c)
-#define RTL838X_SDS5_EXT_REG6			(0xf18c)
-
-/* L2 features */
-#define RTL839X_TBL_ACCESS_L2_CTRL		(0x1180)
-#define RTL839X_TBL_ACCESS_L2_DATA(idx)		(0x1184 + ((idx) << 2))
-#define RTL838X_TBL_ACCESS_CTRL_0		(0x6914)
-#define RTL838X_TBL_ACCESS_DATA_0(idx)		(0x6918 + ((idx) << 2))
-
-/* MAC-side link state handling */
-#define RTL838X_MAC_LINK_STS			(0xa188)
-#define RTL839X_MAC_LINK_STS			(0x0390)
-#define RTL930X_MAC_LINK_STS			(0xCB10)
-#define RTL931X_MAC_LINK_STS			(0x0ec0)
-
-#define RTL838X_MAC_LINK_SPD_STS		(0xa190)
-#define RTL839X_MAC_LINK_SPD_STS		(0x03a0)
-#define RTL930X_MAC_LINK_SPD_STS		(0xCB18)
-#define RTL931X_MAC_LINK_SPD_STS		(0x0ed0)
-
-#define RTL838X_MAC_LINK_DUP_STS		(0xa19c)
-#define RTL839X_MAC_LINK_DUP_STS		(0x03b0)
-#define RTL930X_MAC_LINK_DUP_STS		(0xCB28)
-#define RTL931X_MAC_LINK_DUP_STS		(0x0ef0)
-
-// TODO: RTL8390_MAC_LINK_MEDIA_STS_ADDR ???
-
-#define RTL838X_MAC_TX_PAUSE_STS		(0xa1a0)
-#define RTL839X_MAC_TX_PAUSE_STS		(0x03b8)
-#define RTL930X_MAC_TX_PAUSE_STS		(0xCB2C)
-#define RTL931X_MAC_TX_PAUSE_STS		(0x0ef8)
-
-#define RTL838X_MAC_RX_PAUSE_STS		(0xa1a4)
-#define RTL839X_MAC_RX_PAUSE_STS		(0xCB30)
-#define RTL930X_MAC_RX_PAUSE_STS		(0xC2F8)
-#define RTL931X_MAC_RX_PAUSE_STS		(0x0f00)
-
-#define RTL838X_EEE_TX_TIMER_GIGA_CTRL		(0xaa04)
-#define RTL838X_EEE_TX_TIMER_GELITE_CTRL	(0xaa08)
-
-#define RTL930X_L2_UNKN_UC_FLD_PMSK		(0x9064)
-#define RTL931X_L2_UNKN_UC_FLD_PMSK		(0xC8F4)
-
-#define RTL839X_MAC_GLB_CTRL			(0x02a8)
-#define RTL839X_SCHED_LB_TICK_TKN_CTRL		(0x60f8)
-
-#define RTL838X_L2_TBL_FLUSH_CTRL		(0x3370)
-#define RTL839X_L2_TBL_FLUSH_CTRL		(0x3ba0)
-#define RTL930X_L2_TBL_FLUSH_CTRL		(0x9404)
-#define RTL931X_L2_TBL_FLUSH_CTRL		(0xCD9C)
-
-#define RTL930X_L2_PORT_SABLK_CTRL		(0x905c)
-#define RTL930X_L2_PORT_DABLK_CTRL		(0x9060)
-
-/* MAC link state bits */
-#define FORCE_EN				(1 << 0)
-#define FORCE_LINK_EN				(1 << 1)
-#define NWAY_EN					(1 << 2)
-#define DUPLX_MODE				(1 << 3)
-#define TX_PAUSE_EN				(1 << 6)
-#define RX_PAUSE_EN				(1 << 7)
-
-/* L2 Notification DMA interface */
-#define RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL	(0x785C)
-#define RTL839X_L2_NOTIFICATION_CTRL		(0x7808)
-#define RTL931X_L2_NTFY_RING_BASE_ADDR		(0x09DC)
-#define RTL931X_L2_NTFY_RING_CUR_ADDR		(0x09E0)
-#define RTL839X_L2_NOTIFICATION_CTRL		(0x7808)
-#define RTL931X_L2_NTFY_CTRL			(0xCDC8)
-#define RTL838X_L2_CTRL_0			(0x3200)
-#define RTL839X_L2_CTRL_0			(0x3800)
-#define RTL930X_L2_CTRL				(0x8FD8)
-#define RTL931X_L2_CTRL				(0xC800)
-
-/* TRAPPING to CPU-PORT */
-#define RTL838X_SPCL_TRAP_IGMP_CTRL		(0x6984)
-#define RTL838X_RMA_CTRL_0			(0x4300)
-#define RTL838X_RMA_CTRL_1			(0x4304)
-#define RTL839X_RMA_CTRL_0			(0x1200)
-
-#define RTL839X_SPCL_TRAP_IGMP_CTRL		(0x1058)
-#define RTL839X_RMA_CTRL_1			(0x1204)
-#define RTL839X_RMA_CTRL_2			(0x1208)
-#define RTL839X_RMA_CTRL_3			(0x120C)
-
-#define RTL930X_VLAN_APP_PKT_CTRL		(0xA23C)
-#define RTL930X_RMA_CTRL_0			(0x9E60)
-#define RTL930X_RMA_CTRL_1			(0x9E64)
-#define RTL930X_RMA_CTRL_2			(0x9E68)
-
-#define RTL931X_VLAN_APP_PKT_CTRL		(0x96b0)
-#define RTL931X_RMA_CTRL_0			(0x8800)
-#define RTL931X_RMA_CTRL_1			(0x8804)
-#define RTL931X_RMA_CTRL_2			(0x8808)
-
-/* Advanced SMI control for clause 45 PHYs */
-#define RTL930X_SMI_MAC_TYPE_CTRL		(0xCA04)
-#define RTL930X_SMI_PORT24_27_ADDR_CTRL		(0xCB90)
-#define RTL930X_SMI_PORT0_15_POLLING_SEL	(0xCA08)
-#define RTL930X_SMI_PORT16_27_POLLING_SEL	(0xCA0C)
-
-#define RTL930X_SMI_10GPHY_POLLING_REG0_CFG	(0xCBB4)
-#define RTL930X_SMI_10GPHY_POLLING_REG9_CFG	(0xCBB8)
-#define RTL930X_SMI_10GPHY_POLLING_REG10_CFG	(0xCBBC)
-#define RTL930X_SMI_PRVTE_POLLING_CTRL		(0xCA10)
-
-/* Registers of the internal Serdes of the 8390 */
-#define RTL839X_SDS12_13_XSG0			(0xB800)
-
-/* Chip configuration registers of the RTL9310 */
-#define RTL931X_MEM_ENCAP_INIT			(0x4854)
-#define RTL931X_MEM_MIB_INIT			(0x7E18)
-#define RTL931X_MEM_ACL_INIT			(0x40BC)
-#define RTL931X_MEM_ALE_INIT_0			(0x83F0)
-#define RTL931X_MEM_ALE_INIT_1			(0x83F4)
-#define RTL931X_MEM_ALE_INIT_2			(0x82E4)
-#define RTL931X_MDX_CTRL_RSVD			(0x0fcc)
-#define RTL931X_PS_SOC_CTRL			(0x13f8)
-#define RTL931X_SMI_10GPHY_POLLING_SEL2		(0xCF8)
-#define RTL931X_SMI_10GPHY_POLLING_SEL3		(0xCFC)
-#define RTL931X_SMI_10GPHY_POLLING_SEL4		(0xD00)
-
-/* Registers of the internal Serdes of the 8380 */
-#define RTL838X_SDS4_FIB_REG0			(0xF800)
-
-inline int rtl838x_mac_port_ctrl(int p)
-{
-	return RTL838X_MAC_PORT_CTRL + (p << 7);
-}
-
-inline int rtl839x_mac_port_ctrl(int p)
-{
-	return RTL839X_MAC_PORT_CTRL + (p << 7);
-}
-
-/* On the RTL931XX, the functionality of the MAC port control register is split up
- * into RTL931X_MAC_L2_PORT_CTRL and RTL931X_MAC_PORT_CTRL the functionality used
- * by the Ethernet driver is in the same bits now in RTL931X_MAC_L2_PORT_CTRL
- */
-
-inline int rtl930x_mac_port_ctrl(int p)
-{
-	return RTL930X_MAC_L2_PORT_CTRL + (p << 6);
-}
-
-inline int rtl931x_mac_port_ctrl(int p)
-{
-	return RTL931X_MAC_L2_PORT_CTRL + (p << 7);
-}
-
-inline int rtl838x_dma_if_rx_ring_size(int i)
-{
-	return RTL838X_DMA_IF_RX_RING_SIZE + ((i >> 3) << 2);
-}
-
-inline int rtl839x_dma_if_rx_ring_size(int i)
-{
-	return RTL839X_DMA_IF_RX_RING_SIZE + ((i >> 3) << 2);
-}
-
-inline int rtl930x_dma_if_rx_ring_size(int i)
-{
-	return RTL930X_DMA_IF_RX_RING_SIZE + ((i / 3) << 2);
-}
-
-inline int rtl931x_dma_if_rx_ring_size(int i)
-{
-	return RTL931X_DMA_IF_RX_RING_SIZE + ((i / 3) << 2);
-}
-
-inline int rtl838x_dma_if_rx_ring_cntr(int i)
-{
-	return RTL838X_DMA_IF_RX_RING_CNTR + ((i >> 3) << 2);
-}
-
-inline int rtl839x_dma_if_rx_ring_cntr(int i)
-{
-	return RTL839X_DMA_IF_RX_RING_CNTR + ((i >> 3) << 2);
-}
-
-inline int rtl930x_dma_if_rx_ring_cntr(int i)
-{
-	return RTL930X_DMA_IF_RX_RING_CNTR + ((i / 3) << 2);
-}
-
-inline int rtl931x_dma_if_rx_ring_cntr(int i)
-{
-	return RTL931X_DMA_IF_RX_RING_CNTR + ((i / 3) << 2);
-}
-
-inline u32 rtl838x_get_mac_link_sts(int port)
-{
-	return (sw_r32(RTL838X_MAC_LINK_STS) & BIT(port));
-}
-
-inline u32 rtl839x_get_mac_link_sts(int p)
-{
-	return (sw_r32(RTL839X_MAC_LINK_STS + ((p >> 5) << 2)) & BIT(p % 32));
-}
-
-inline u32 rtl930x_get_mac_link_sts(int port)
-{
-	u32 link = sw_r32(RTL930X_MAC_LINK_STS);
-
-	link = sw_r32(RTL930X_MAC_LINK_STS);
-	pr_info("%s link state is %08x\n", __func__, link);
-	return link & BIT(port);
-}
-
-inline u32 rtl931x_get_mac_link_sts(int p)
-{
-	return (sw_r32(RTL931X_MAC_LINK_STS + ((p >> 5) << 2)) & BIT(p % 32));
-}
-
-inline u32 rtl838x_get_mac_link_dup_sts(int port)
-{
-	return (sw_r32(RTL838X_MAC_LINK_DUP_STS) & BIT(port));
-}
-
-inline u32 rtl839x_get_mac_link_dup_sts(int p)
-{
-	return (sw_r32(RTL839X_MAC_LINK_DUP_STS + ((p >> 5) << 2)) & BIT(p % 32));
-}
-
-inline u32 rtl930x_get_mac_link_dup_sts(int port)
-{
-	return (sw_r32(RTL930X_MAC_LINK_DUP_STS) & BIT(port));
-}
-
-inline u32 rtl931x_get_mac_link_dup_sts(int p)
-{
-	return (sw_r32(RTL931X_MAC_LINK_DUP_STS + ((p >> 5) << 2)) & BIT(p % 32));
-}
-
-inline u32 rtl838x_get_mac_link_spd_sts(int port)
-{
-	int r = RTL838X_MAC_LINK_SPD_STS + ((port >> 4) << 2);
-	u32 speed = sw_r32(r);
-
-	speed >>= (port % 16) << 1;
-	return (speed & 0x3);
-}
-
-inline u32 rtl839x_get_mac_link_spd_sts(int port)
-{
-	int r = RTL839X_MAC_LINK_SPD_STS + ((port >> 4) << 2);
-	u32 speed = sw_r32(r);
-
-	speed >>= (port % 16) << 1;
-	return (speed & 0x3);
-}
-
-
-inline u32 rtl930x_get_mac_link_spd_sts(int port)
-{
-	int r = RTL930X_MAC_LINK_SPD_STS + ((port >> 3) << 2);
-	u32 speed = sw_r32(r);
-
-	speed >>= (port % 8) << 2;
-	return (speed & 0xf);
-}
-
-inline u32 rtl931x_get_mac_link_spd_sts(int port)
-{
-	int r = RTL931X_MAC_LINK_SPD_STS + ((port >> 3) << 2);
-	u32 speed = sw_r32(r);
-
-	speed >>= (port % 8) << 2;
-	return (speed & 0xf);
-}
-
-inline u32 rtl838x_get_mac_rx_pause_sts(int port)
-{
-	return (sw_r32(RTL838X_MAC_RX_PAUSE_STS) & (1 << port));
-}
-
-inline u32 rtl839x_get_mac_rx_pause_sts(int p)
-{
-	return (sw_r32(RTL839X_MAC_RX_PAUSE_STS + ((p >> 5) << 2)) & BIT(p % 32));
-}
-
-inline u32 rtl930x_get_mac_rx_pause_sts(int port)
-{
-	return (sw_r32(RTL930X_MAC_RX_PAUSE_STS) & (1 << port));
-}
-
-inline u32 rtl931x_get_mac_rx_pause_sts(int p)
-{
-	return (sw_r32(RTL931X_MAC_RX_PAUSE_STS + ((p >> 5) << 2)) & BIT(p % 32));
-}
-
-inline u32 rtl838x_get_mac_tx_pause_sts(int port)
-{
-	return (sw_r32(RTL838X_MAC_TX_PAUSE_STS) & (1 << port));
-}
-
-inline u32 rtl839x_get_mac_tx_pause_sts(int p)
-{
-	return (sw_r32(RTL839X_MAC_TX_PAUSE_STS + ((p >> 5) << 2)) & BIT(p % 32));
-}
-
-inline u32 rtl930x_get_mac_tx_pause_sts(int port)
-{
-	return (sw_r32(RTL930X_MAC_TX_PAUSE_STS) & (1 << port));
-}
-
-inline u32 rtl931x_get_mac_tx_pause_sts(int p)
-{
-	return (sw_r32(RTL931X_MAC_TX_PAUSE_STS + ((p >> 5) << 2)) & BIT(p % 32));
-}
-
-struct p_hdr;
-struct dsa_tag;
-
-struct rtl838x_eth_reg {
-	irqreturn_t (*net_irq)(int irq, void *dev_id);
-	int (*mac_port_ctrl)(int port);
-	int dma_if_intr_sts;
-	int dma_if_intr_msk;
-	int dma_if_intr_rx_runout_sts;
-	int dma_if_intr_rx_done_sts;
-	int dma_if_intr_tx_done_sts;
-	int dma_if_intr_rx_runout_msk;
-	int dma_if_intr_rx_done_msk;
-	int dma_if_intr_tx_done_msk;
-	int l2_ntfy_if_intr_sts;
-	int l2_ntfy_if_intr_msk;
-	int dma_if_ctrl;
-	int mac_force_mode_ctrl;
-	int dma_rx_base;
-	int dma_tx_base;
-	int (*dma_if_rx_ring_size)(int ring);
-	int (*dma_if_rx_ring_cntr)(int ring);
-	int dma_if_rx_cur;
-	int rst_glb_ctrl;
-	u32 (*get_mac_link_sts)(int port);
-	u32 (*get_mac_link_dup_sts)(int port);
-	u32 (*get_mac_link_spd_sts)(int port);
-	u32 (*get_mac_rx_pause_sts)(int port);
-	u32 (*get_mac_tx_pause_sts)(int port);
-	int mac;
-	int l2_tbl_flush_ctrl;
-	void (*update_cntr)(int r, int work_done);
-	void (*create_tx_header)(struct p_hdr *h, unsigned int dest_port, int prio);
-	bool (*decode_tag)(struct p_hdr *h, struct dsa_tag *tag);
-};
-
-int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val);
-int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val);
-int rtl838x_write_mmd_phy(u32 port, u32 addr, u32 reg, u32 val);
-int rtl838x_read_mmd_phy(u32 port, u32 addr, u32 reg, u32 *val);
-int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val);
-int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val);
-int rtl839x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val);
-int rtl839x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val);
-int rtl930x_write_phy(u32 port, u32 page, u32 reg, u32 val);
-int rtl930x_read_phy(u32 port, u32 page, u32 reg, u32 *val);
-int rtl931x_write_phy(u32 port, u32 page, u32 reg, u32 val);
-int rtl931x_read_phy(u32 port, u32 page, u32 reg, u32 *val);
-int rtl83xx_setup_tc(struct net_device *dev, enum tc_setup_type type, void *type_data);
-
-#endif /* _RTL838X_ETH_H */
diff --git a/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.c b/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.c
deleted file mode 100644
index 491ceb48b6a0..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.c
+++ /dev/null
@@ -1,4018 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* Realtek RTL838X Ethernet MDIO interface driver
- *
- * Copyright (C) 2020 B. Koblitz
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/phy.h>
-#include <linux/netdevice.h>
-#include <linux/firmware.h>
-#include <linux/crc32.h>
-#include <linux/sfp.h>
-
-#include <asm/mach-rtl838x/mach-rtl83xx.h>
-#include "rtl83xx-phy.h"
-
-extern struct rtl83xx_soc_info soc_info;
-extern struct mutex smi_lock;
-
-#define PHY_CTRL_REG	0
-#define PHY_POWER_BIT	11
-
-#define PHY_PAGE_2	2
-#define PHY_PAGE_4	4
-
-/* all Clause-22 RealTek MDIO PHYs use register 0x1f for page select */
-#define RTL8XXX_PAGE_SELECT		0x1f
-
-#define RTL8XXX_PAGE_MAIN		0x0000
-#define RTL821X_PAGE_PORT		0x0266
-#define RTL821X_PAGE_POWER		0x0a40
-#define RTL821X_PAGE_GPHY		0x0a42
-#define RTL821X_PAGE_MAC		0x0a43
-#define RTL821X_PAGE_STATE		0x0b80
-#define RTL821X_PAGE_PATCH		0x0b82
-
-/*
- * Using the special page 0xfff with the MDIO controller found in
- * RealTek SoCs allows to access the PHY in RAW mode, ie. bypassing
- * the cache and paging engine of the MDIO controller.
- */
-#define RTL83XX_PAGE_RAW		0x0fff
-
-/* internal RTL821X PHY uses register 0x1d to select media page */
-#define RTL821XINT_MEDIA_PAGE_SELECT	0x1d
-/* external RTL821X PHY uses register 0x1e to select media page */
-#define RTL821XEXT_MEDIA_PAGE_SELECT	0x1e
-
-#define RTL821X_MEDIA_PAGE_AUTO		0
-#define RTL821X_MEDIA_PAGE_COPPER	1
-#define RTL821X_MEDIA_PAGE_FIBRE	3
-#define RTL821X_MEDIA_PAGE_INTERNAL	8
-
-#define RTL9300_PHY_ID_MASK 0xf0ffffff
-
-/*
- * This lock protects the state of the SoC automatically polling the PHYs over the SMI
- * bus to detect e.g. link and media changes. For operations on the PHYs such as
- * patching or other configuration changes such as EEE, polling needs to be disabled
- * since otherwise these operations may fails or lead to unpredictable results.
- */
-DEFINE_MUTEX(poll_lock);
-
-static const struct firmware rtl838x_8380_fw;
-static const struct firmware rtl838x_8214fc_fw;
-static const struct firmware rtl838x_8218b_fw;
-
-static u64 disable_polling(int port)
-{
-	u64 saved_state;
-
-	mutex_lock(&poll_lock);
-
-	switch (soc_info.family) {
-	case RTL8380_FAMILY_ID:
-		saved_state = sw_r32(RTL838X_SMI_POLL_CTRL);
-		sw_w32_mask(BIT(port), 0, RTL838X_SMI_POLL_CTRL);
-		break;
-	case RTL8390_FAMILY_ID:
-		saved_state = sw_r32(RTL839X_SMI_PORT_POLLING_CTRL + 4);
-		saved_state <<= 32;
-		saved_state |= sw_r32(RTL839X_SMI_PORT_POLLING_CTRL);
-		sw_w32_mask(BIT(port % 32), 0,
-			    RTL839X_SMI_PORT_POLLING_CTRL + ((port >> 5) << 2));
-		break;
-	case RTL9300_FAMILY_ID:
-		saved_state = sw_r32(RTL930X_SMI_POLL_CTRL);
-		sw_w32_mask(BIT(port), 0, RTL930X_SMI_POLL_CTRL);
-		break;
-	case RTL9310_FAMILY_ID:
-		pr_warn("%s not implemented for RTL931X\n", __func__);
-		break;
-	}
-
-	mutex_unlock(&poll_lock);
-
-	return saved_state;
-}
-
-static int resume_polling(u64 saved_state)
-{
-	mutex_lock(&poll_lock);
-
-	switch (soc_info.family) {
-	case RTL8380_FAMILY_ID:
-		sw_w32(saved_state, RTL838X_SMI_POLL_CTRL);
-		break;
-	case RTL8390_FAMILY_ID:
-		sw_w32(saved_state >> 32, RTL839X_SMI_PORT_POLLING_CTRL + 4);
-		sw_w32(saved_state, RTL839X_SMI_PORT_POLLING_CTRL);
-		break;
-	case RTL9300_FAMILY_ID:
-		sw_w32(saved_state, RTL930X_SMI_POLL_CTRL);
-		break;
-	case RTL9310_FAMILY_ID:
-		pr_warn("%s not implemented for RTL931X\n", __func__);
-		break;
-	}
-
-	mutex_unlock(&poll_lock);
-
-	return 0;
-}
-
-static void rtl8380_int_phy_on_off(struct phy_device *phydev, bool on)
-{
-	phy_modify(phydev, 0, BIT(11), on?0:BIT(11));
-}
-
-static void rtl8380_rtl8214fc_on_off(struct phy_device *phydev, bool on)
-{
-	/* fiber ports */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
-	phy_modify(phydev, 0x10, BIT(11), on?0:BIT(11));
-
-	/* copper ports */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
-	phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, BIT(11), on?0:BIT(11));
-}
-
-static void rtl8380_phy_reset(struct phy_device *phydev)
-{
-	phy_modify(phydev, 0, BIT(15), BIT(15));
-}
-
-// The access registers for SDS_MODE_SEL and the LSB for each SDS within
-u16 rtl9300_sds_regs[] = { 0x0194, 0x0194, 0x0194, 0x0194, 0x02a0, 0x02a0, 0x02a0, 0x02a0,
-			   0x02A4, 0x02A4, 0x0198, 0x0198 };
-u8  rtl9300_sds_lsb[]  = { 0, 6, 12, 18, 0, 6, 12, 18, 0, 6, 0, 6};
-
-/*
- * Reset the SerDes by powering it off and set a new operations mode
- * of the SerDes. 0x1f is off. Other modes are
- * 0x02: SGMII		0x04: 1000BX_FIBER	0x05: FIBER100
- * 0x06: QSGMII		0x09: RSGMII		0x0d: USXGMII
- * 0x10: XSGMII		0x12: HISGMII		0x16: 2500Base_X
- * 0x17: RXAUI_LITE	0x19: RXAUI_PLUS	0x1a: 10G Base-R
- * 0x1b: 10GR1000BX_AUTO			0x1f: OFF
- */
-void rtl9300_sds_rst(int sds_num, u32 mode)
-{
-	pr_info("%s %d\n", __func__, mode);
-	if (sds_num < 0 || sds_num > 11) {
-		pr_err("Wrong SerDes number: %d\n", sds_num);
-		return;
-	}
-
-	sw_w32_mask(0x1f << rtl9300_sds_lsb[sds_num], 0x1f << rtl9300_sds_lsb[sds_num],
-		    rtl9300_sds_regs[sds_num]);
-	mdelay(10);
-
-	sw_w32_mask(0x1f << rtl9300_sds_lsb[sds_num], mode << rtl9300_sds_lsb[sds_num],
-		    rtl9300_sds_regs[sds_num]);
-	mdelay(10);
-
-	pr_debug("%s: 194:%08x 198:%08x 2a0:%08x 2a4:%08x\n", __func__,
-		sw_r32(0x194), sw_r32(0x198), sw_r32(0x2a0), sw_r32(0x2a4));
-}
-
-void rtl9300_sds_set(int sds_num, u32 mode)
-{
-	pr_info("%s %d\n", __func__, mode);
-	if (sds_num < 0 || sds_num > 11) {
-		pr_err("Wrong SerDes number: %d\n", sds_num);
-		return;
-	}
-
-	sw_w32_mask(0x1f << rtl9300_sds_lsb[sds_num], mode << rtl9300_sds_lsb[sds_num],
-		    rtl9300_sds_regs[sds_num]);
-	mdelay(10);
-
-	pr_debug("%s: 194:%08x 198:%08x 2a0:%08x 2a4:%08x\n", __func__,
-		sw_r32(0x194), sw_r32(0x198), sw_r32(0x2a0), sw_r32(0x2a4));
-}
-
-u32 rtl9300_sds_mode_get(int sds_num)
-{
-	u32 v;
-
-	if (sds_num < 0 || sds_num > 11) {
-		pr_err("Wrong SerDes number: %d\n", sds_num);
-		return 0;
-	}
-
-	v = sw_r32(rtl9300_sds_regs[sds_num]);
-	v >>= rtl9300_sds_lsb[sds_num];
-
-	return v & 0x1f;
-}
-
-/*
- * On the RTL839x family of SoCs with inbuilt SerDes, these SerDes are accessed through
- * a 2048 bit register that holds the contents of the PHY being simulated by the SoC.
- */
-int rtl839x_read_sds_phy(int phy_addr, int phy_reg)
-{
-	int offset = 0;
-	int reg;
-	u32 val;
-
-	if (phy_addr == 49)
-		offset = 0x100;
-
-	/*
-	 * For the RTL8393 internal SerDes, we simulate a PHY ID in registers 2/3
-	 * which would otherwise read as 0.
-	 */
-	if (soc_info.id == 0x8393) {
-		if (phy_reg == 2)
-			return 0x1c;
-		if (phy_reg == 3)
-			return 0x8393;
-	}
-
-	/*
-	 * Register RTL839X_SDS12_13_XSG0 is 2048 bit broad, the MSB (bit 15) of the
-	 * 0th PHY register is bit 1023 (in byte 0x80). Because PHY-registers are 16
-	 * bit broad, we offset by reg << 1. In the SoC 2 registers are stored in
-	 * one 32 bit register.
-	 */
-	reg = (phy_reg << 1) & 0xfc;
-	val = sw_r32(RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg);
-
-	if (phy_reg & 1)
-		val = (val >> 16) & 0xffff;
-	else
-		val &= 0xffff;
-	return val;
-}
-
-/*
- * On the RTL930x family of SoCs, the internal SerDes are accessed through an IO
- * register which simulates commands to an internal MDIO bus.
- */
-int rtl930x_read_sds_phy(int phy_addr, int page, int phy_reg)
-{
-	int i;
-	u32 cmd = phy_addr << 2 | page << 7 | phy_reg << 13 | 1;
-
-	sw_w32(cmd, RTL930X_SDS_INDACS_CMD);
-
-	for (i = 0; i < 100; i++) {
-		if (!(sw_r32(RTL930X_SDS_INDACS_CMD) & 0x1))
-			break;
-		mdelay(1);
-	}
-
-	if (i >= 100)
-		return -EIO;
-
-	return sw_r32(RTL930X_SDS_INDACS_DATA) & 0xffff;
-}
-
-int rtl930x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v)
-{
-	int i;
-	u32 cmd;
-
-	sw_w32(v, RTL930X_SDS_INDACS_DATA);
-	cmd = phy_addr << 2 | page << 7 | phy_reg << 13 | 0x3;
-
-	for (i = 0; i < 100; i++) {
-		if (!(sw_r32(RTL930X_SDS_INDACS_CMD) & 0x1))
-			break;
-		mdelay(1);
-	}
-
-
-	if (i >= 100) {
-		pr_info("%s ERROR !!!!!!!!!!!!!!!!!!!!\n", __func__);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-int rtl931x_read_sds_phy(int phy_addr, int page, int phy_reg)
-{
-	int i;
-	u32 cmd = phy_addr << 2 | page << 7 | phy_reg << 13 | 1;
-
-	pr_debug("%s: phy_addr(SDS-ID) %d, phy_reg: %d\n", __func__, phy_addr, phy_reg);
-	sw_w32(cmd, RTL931X_SERDES_INDRT_ACCESS_CTRL);
-
-	for (i = 0; i < 100; i++) {
-		if (!(sw_r32(RTL931X_SERDES_INDRT_ACCESS_CTRL) & 0x1))
-			break;
-		mdelay(1);
-	}
-
-	if (i >= 100)
-		return -EIO;
-
-	pr_debug("%s: returning %04x\n", __func__, sw_r32(RTL931X_SERDES_INDRT_DATA_CTRL) & 0xffff);
-	return sw_r32(RTL931X_SERDES_INDRT_DATA_CTRL) & 0xffff;
-}
-
-int rtl931x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v)
-{
-	int i;
-	u32 cmd;
-
-	cmd = phy_addr << 2 | page << 7 | phy_reg << 13;
-	sw_w32(cmd, RTL931X_SERDES_INDRT_ACCESS_CTRL);
-
-	sw_w32(v, RTL931X_SERDES_INDRT_DATA_CTRL);
-		
-	cmd =  sw_r32(RTL931X_SERDES_INDRT_ACCESS_CTRL) | 0x3;
-	sw_w32(cmd, RTL931X_SERDES_INDRT_ACCESS_CTRL);
-
-	for (i = 0; i < 100; i++) {
-		if (!(sw_r32(RTL931X_SERDES_INDRT_ACCESS_CTRL) & 0x1))
-			break;
-		mdelay(1);
-	}
-
-	if (i >= 100)
-		return -EIO;
-
-	return 0;
-}
-
-/*
- * On the RTL838x SoCs, the internal SerDes is accessed through direct access to
- * standard PHY registers, where a 32 bit register holds a 16 bit word as found
- * in a standard page 0 of a PHY
- */
-int rtl838x_read_sds_phy(int phy_addr, int phy_reg)
-{
-	int offset = 0;
-	u32 val;
-
-	if (phy_addr == 26)
-		offset = 0x100;
-	val = sw_r32(RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2)) & 0xffff;
-
-	return val;
-}
-
-int rtl839x_write_sds_phy(int phy_addr, int phy_reg, u16 v)
-{
-	int offset = 0;
-	int reg;
-	u32 val;
-
-	if (phy_addr == 49)
-		offset = 0x100;
-
-	reg = (phy_reg << 1) & 0xfc;
-	val = v;
-	if (phy_reg & 1) {
-		val = val << 16;
-		sw_w32_mask(0xffff0000, val,
-			    RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg);
-	} else {
-		sw_w32_mask(0xffff, val,
-			    RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg);
-	}
-
-	return 0;
-}
-
-/* Read the link and speed status of the 2 internal SGMII/1000Base-X
- * ports of the RTL838x SoCs
- */
-static int rtl8380_read_status(struct phy_device *phydev)
-{
-	int err;
-
-	err = genphy_read_status(phydev);
-
-	if (phydev->link) {
-		phydev->speed = SPEED_1000;
-		phydev->duplex = DUPLEX_FULL;
-	}
-
-	return err;
-}
-
-/* Read the link and speed status of the 2 internal SGMII/1000Base-X
- * ports of the RTL8393 SoC
- */
-static int rtl8393_read_status(struct phy_device *phydev)
-{
-	int offset = 0;
-	int err;
-	int phy_addr = phydev->mdio.addr;
-	u32 v;
-
-	err = genphy_read_status(phydev);
-	if (phy_addr == 49)
-		offset = 0x100;
-
-	if (phydev->link) {
-		phydev->speed = SPEED_100;
-		/* Read SPD_RD_00 (bit 13) and SPD_RD_01 (bit 6) out of the internal
-		 * PHY registers
-		 */
-		v = sw_r32(RTL839X_SDS12_13_XSG0 + offset + 0x80);
-		if (!(v & (1 << 13)) && (v & (1 << 6)))
-			phydev->speed = SPEED_1000;
-		phydev->duplex = DUPLEX_FULL;
-	}
-
-	return err;
-}
-
-static int rtl8226_read_page(struct phy_device *phydev)
-{
-	return __phy_read(phydev, RTL8XXX_PAGE_SELECT);
-}
-
-static int rtl8226_write_page(struct phy_device *phydev, int page)
-{
-	return __phy_write(phydev, RTL8XXX_PAGE_SELECT, page);
-}
-
-static int rtl8226_read_status(struct phy_device *phydev)
-{
-	int ret = 0, i;
-	u32 val;
-
-// TODO: ret = genphy_read_status(phydev);
-// 	if (ret < 0) {
-// 		pr_info("%s: genphy_read_status failed\n", __func__);
-// 		return ret;
-// 	}
-
-	// Link status must be read twice
-	for (i = 0; i < 2; i++) {
-		val = phy_read_mmd(phydev, MMD_VEND2, 0xA402);
-	}
-	phydev->link = val & BIT(2) ? 1 : 0;
-	if (!phydev->link)
-		goto out;
-
-	// Read duplex status
-	val = phy_read_mmd(phydev, MMD_VEND2, 0xA434);
-	if (val < 0)
-		goto out;
-	phydev->duplex = !!(val & BIT(3));
-
-	// Read speed
-	val = phy_read_mmd(phydev, MMD_VEND2, 0xA434);
-	switch (val & 0x0630) {
-	case 0x0000:
-		phydev->speed = SPEED_10;
-		break;
-	case 0x0010:
-		phydev->speed = SPEED_100;
-		break;
-	case 0x0020:
-		phydev->speed = SPEED_1000;
-		break;
-	case 0x0200:
-		phydev->speed = SPEED_10000;
-		break;
-	case 0x0210:
-		phydev->speed = SPEED_2500;
-		break;
-	case 0x0220:
-		phydev->speed = SPEED_5000;
-		break;
-	default:
-		break;
-	}
-out:
-	return ret;
-}
-
-static int rtl8226_advertise_aneg(struct phy_device *phydev)
-{
-	int ret = 0;
-	u32 v;
-
-	pr_info("In %s\n", __func__);
-
-	v = phy_read_mmd(phydev, MMD_AN, 16);
-	if (v < 0)
-		goto out;
-
-	v |= BIT(5); // HD 10M
-	v |= BIT(6); // FD 10M
-	v |= BIT(7); // HD 100M
-	v |= BIT(8); // FD 100M
-
-	ret = phy_write_mmd(phydev, MMD_AN, 16, v);
-
-	// Allow 1GBit
-	v = phy_read_mmd(phydev, MMD_VEND2, 0xA412);
-	if (v < 0)
-		goto out;
-	v |= BIT(9); // FD 1000M
-
-	ret = phy_write_mmd(phydev, MMD_VEND2, 0xA412, v);
-	if (ret < 0)
-		goto out;
-
-	// Allow 2.5G
-	v = phy_read_mmd(phydev, MMD_AN, 32);
-	if (v < 0)
-		goto out;
-
-	v |= BIT(7);
-	ret = phy_write_mmd(phydev, MMD_AN, 32, v);
-
-out:
-	return ret;
-}
-
-static int rtl8226_config_aneg(struct phy_device *phydev)
-{
-	int ret = 0;
-	u32 v;
-
-	pr_debug("In %s\n", __func__);
-	if (phydev->autoneg == AUTONEG_ENABLE) {
-		ret = rtl8226_advertise_aneg(phydev);
-		if (ret)
-			goto out;
-		// AutoNegotiationEnable
-		v = phy_read_mmd(phydev, MMD_AN, 0);
-		if (v < 0)
-			goto out;
-
-		v |= BIT(12); // Enable AN
-		ret = phy_write_mmd(phydev, MMD_AN, 0, v);
-		if (ret < 0)
-			goto out;
-
-		// RestartAutoNegotiation
-		v = phy_read_mmd(phydev, MMD_VEND2, 0xA400);
-		if (v < 0)
-			goto out;
-		v |= BIT(9);
-
-		ret = phy_write_mmd(phydev, MMD_VEND2, 0xA400, v);
-	}
-
-//	TODO: ret = __genphy_config_aneg(phydev, ret);
-
-out:
-	return ret;
-}
-
-static int rtl8226_get_eee(struct phy_device *phydev,
-				     struct ethtool_eee *e)
-{
-	u32 val;
-	int addr = phydev->mdio.addr;
-
-	pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled);
-
-	val = phy_read_mmd(phydev, MMD_AN, 60);
-	if (e->eee_enabled) {
-		e->eee_enabled = !!(val & BIT(1));
-		if (!e->eee_enabled) {
-			val = phy_read_mmd(phydev, MMD_AN, 62);
-			e->eee_enabled = !!(val & BIT(0));
-		}
-	}
-	pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled);
-
-	return 0;
-}
-
-static int rtl8226_set_eee(struct phy_device *phydev, struct ethtool_eee *e)
-{
-	int port = phydev->mdio.addr;
-	u64 poll_state;
-	bool an_enabled;
-	u32 val;
-
-	pr_info("In %s, port %d, enabled %d\n", __func__, port, e->eee_enabled);
-
-	poll_state = disable_polling(port);
-
-	// Remember aneg state
-	val = phy_read_mmd(phydev, MMD_AN, 0);
-	an_enabled = !!(val & BIT(12));
-
-	// Setup 100/1000MBit
-	val = phy_read_mmd(phydev, MMD_AN, 60);
-	if (e->eee_enabled)
-		val |= 0x6;
-	else
-		val &= 0x6;
-	phy_write_mmd(phydev, MMD_AN, 60, val);
-
-	// Setup 2.5GBit
-	val = phy_read_mmd(phydev, MMD_AN, 62);
-	if (e->eee_enabled)
-		val |= 0x1;
-	else
-		val &= 0x1;
-	phy_write_mmd(phydev, MMD_AN, 62, val);
-
-	// RestartAutoNegotiation
-	val = phy_read_mmd(phydev, MMD_VEND2, 0xA400);
-	val |= BIT(9);
-	phy_write_mmd(phydev, MMD_VEND2, 0xA400, val);
-
-	resume_polling(poll_state);
-
-	return 0;
-}
-
-static struct fw_header *rtl838x_request_fw(struct phy_device *phydev,
-					    const struct firmware *fw,
-					    const char *name)
-{
-	struct device *dev = &phydev->mdio.dev;
-	int err;
-	struct fw_header *h;
-	uint32_t checksum, my_checksum;
-
-	err = request_firmware(&fw, name, dev);
-	if (err < 0)
-		goto out;
-
-	if (fw->size < sizeof(struct fw_header)) {
-		pr_err("Firmware size too small.\n");
-		err = -EINVAL;
-		goto out;
-	}
-
-	h = (struct fw_header *) fw->data;
-	pr_info("Firmware loaded. Size %d, magic: %08x\n", fw->size, h->magic);
-
-	if (h->magic != 0x83808380) {
-		pr_err("Wrong firmware file: MAGIC mismatch.\n");
-		goto out;
-	}
-
-	checksum = h->checksum;
-	h->checksum = 0;
-	my_checksum = ~crc32(0xFFFFFFFFU, fw->data, fw->size);
-	if (checksum != my_checksum) {
-		pr_err("Firmware checksum mismatch.\n");
-		err = -EINVAL;
-		goto out;
-	}
-	h->checksum = checksum;
-
-	return h;
-out:
-	dev_err(dev, "Unable to load firmware %s (%d)\n", name, err);
-	return NULL;
-}
-
-static void rtl821x_phy_setup_package_broadcast(struct phy_device *phydev, bool enable)
-{
-	int mac = phydev->mdio.addr;
-
-	/* select main page 0 */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
-	/* write to 0x8 to register 0x1d on main page 0 */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
-	/* select page 0x266 */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PORT);
-	/* set phy id and target broadcast bitmap in register 0x16 on page 0x266 */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, 0x16, (enable?0xff00:0x00) | mac);
-	/* return to main page 0 */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
-	/* write to 0x0 to register 0x1d on main page 0 */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
-	mdelay(1);
-}
-
-static int rtl8390_configure_generic(struct phy_device *phydev)
-{
-	int mac = phydev->mdio.addr;
-	u32 val, phy_id;
-
-	val = phy_read(phydev, 2);
-	phy_id = val << 16;
-	val = phy_read(phydev, 3);
-	phy_id |= val;
-	pr_debug("Phy on MAC %d: %x\n", mac, phy_id);
-
-	/* Read internal PHY ID */
-	phy_write_paged(phydev, 31, 27, 0x0002);
-	val = phy_read_paged(phydev, 31, 28);
-
-	/* Internal RTL8218B, version 2 */
-	phydev_info(phydev, "Detected unknown %x\n", val);
-	return 0;
-}
-
-static int rtl8380_configure_int_rtl8218b(struct phy_device *phydev)
-{
-	u32 val, phy_id;
-	int i, p, ipd_flag;
-	int mac = phydev->mdio.addr;
-	struct fw_header *h;
-	u32 *rtl838x_6275B_intPhy_perport;
-	u32 *rtl8218b_6276B_hwEsd_perport;
-
-	val = phy_read(phydev, 2);
-	phy_id = val << 16;
-	val = phy_read(phydev, 3);
-	phy_id |= val;
-	pr_debug("Phy on MAC %d: %x\n", mac, phy_id);
-
-	/* Read internal PHY ID */
-	phy_write_paged(phydev, 31, 27, 0x0002);
-	val = phy_read_paged(phydev, 31, 28);
-	if (val != 0x6275) {
-		phydev_err(phydev, "Expected internal RTL8218B, found PHY-ID %x\n", val);
-		return -1;
-	}
-
-	/* Internal RTL8218B, version 2 */
-	phydev_info(phydev, "Detected internal RTL8218B\n");
-
-	h = rtl838x_request_fw(phydev, &rtl838x_8380_fw, FIRMWARE_838X_8380_1);
-	if (!h)
-		return -1;
-
-	if (h->phy != 0x83800000) {
-		phydev_err(phydev, "Wrong firmware file: PHY mismatch.\n");
-		return -1;
-	}
-
-	rtl838x_6275B_intPhy_perport = (void *)h + sizeof(struct fw_header)
-			+ h->parts[8].start;
-
-	rtl8218b_6276B_hwEsd_perport = (void *)h + sizeof(struct fw_header)
-			+ h->parts[9].start;
-
-	if (sw_r32(RTL838X_DMY_REG31) == 0x1)
-		ipd_flag = 1;
-
-	val = phy_read(phydev, 0);
-	if (val & BIT(11))
-		rtl8380_int_phy_on_off(phydev, true);
-	else
-		rtl8380_phy_reset(phydev);
-	msleep(100);
-
-	/* Ready PHY for patch */
-	for (p = 0; p < 8; p++) {
-		phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH);
-		phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, 0x10, 0x0010);
-	}
-	msleep(500);
-	for (p = 0; p < 8; p++) {
-		for (i = 0; i < 100 ; i++) {
-			val = phy_package_port_read_paged(phydev, p, RTL821X_PAGE_STATE, 0x10);
-			if (val & 0x40)
-				break;
-		}
-		if (i >= 100) {
-			phydev_err(phydev,
-				   "ERROR: Port %d not ready for patch.\n",
-				   mac + p);
-			return -1;
-		}
-	}
-	for (p = 0; p < 8; p++) {
-		i = 0;
-		while (rtl838x_6275B_intPhy_perport[i * 2]) {
-			phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW,
-				rtl838x_6275B_intPhy_perport[i * 2],
-				rtl838x_6275B_intPhy_perport[i * 2 + 1]);
-			i++;
-		}
-		i = 0;
-		while (rtl8218b_6276B_hwEsd_perport[i * 2]) {
-			phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW,
-				rtl8218b_6276B_hwEsd_perport[i * 2],
-				rtl8218b_6276B_hwEsd_perport[i * 2 + 1]);
-			i++;
-		}
-	}
-	return 0;
-}
-
-static int rtl8380_configure_ext_rtl8218b(struct phy_device *phydev)
-{
-	u32 val, ipd, phy_id;
-	int i, l;
-	int mac = phydev->mdio.addr;
-	struct fw_header *h;
-	u32 *rtl8380_rtl8218b_perchip;
-	u32 *rtl8218B_6276B_rtl8380_perport;
-	u32 *rtl8380_rtl8218b_perport;
-
-	if (soc_info.family == RTL8380_FAMILY_ID && mac != 0 && mac != 16) {
-		phydev_err(phydev, "External RTL8218B must have PHY-IDs 0 or 16!\n");
-		return -1;
-	}
-	val = phy_read(phydev, 2);
-	phy_id = val << 16;
-	val = phy_read(phydev, 3);
-	phy_id |= val;
-	pr_info("Phy on MAC %d: %x\n", mac, phy_id);
-
-	/* Read internal PHY ID */
-	phy_write_paged(phydev, 31, 27, 0x0002);
-	val = phy_read_paged(phydev, 31, 28);
-	if (val != 0x6276) {
-		phydev_err(phydev, "Expected external RTL8218B, found PHY-ID %x\n", val);
-		return -1;
-	}
-	phydev_info(phydev, "Detected external RTL8218B\n");
-
-	h = rtl838x_request_fw(phydev, &rtl838x_8218b_fw, FIRMWARE_838X_8218b_1);
-	if (!h)
-		return -1;
-
-	if (h->phy != 0x8218b000) {
-		phydev_err(phydev, "Wrong firmware file: PHY mismatch.\n");
-		return -1;
-	}
-
-	rtl8380_rtl8218b_perchip = (void *)h + sizeof(struct fw_header)
-			+ h->parts[0].start;
-
-	rtl8218B_6276B_rtl8380_perport = (void *)h + sizeof(struct fw_header)
-			+ h->parts[1].start;
-
-	rtl8380_rtl8218b_perport = (void *)h + sizeof(struct fw_header)
-			+ h->parts[2].start;
-
-	val = phy_read(phydev, 0);
-	if (val & (1 << 11))
-		rtl8380_int_phy_on_off(phydev, true);
-	else
-		rtl8380_phy_reset(phydev);
-
-	msleep(100);
-
-	/* Get Chip revision */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, 0x1b, 0x4);
-	val = phy_read_paged(phydev, RTL83XX_PAGE_RAW, 0x1c);
-
-	phydev_info(phydev, "Detected chip revision %04x\n", val);
-
-	i = 0;
-	while (rtl8380_rtl8218b_perchip[i * 3]
-		&& rtl8380_rtl8218b_perchip[i * 3 + 1]) {
-			phy_package_port_write_paged(phydev, rtl8380_rtl8218b_perchip[i * 3],
-					  RTL83XX_PAGE_RAW, rtl8380_rtl8218b_perchip[i * 3 + 1],
-					  rtl8380_rtl8218b_perchip[i * 3 + 2]);
-		i++;
-	}
-
-	/* Enable PHY */
-	for (i = 0; i < 8; i++) {
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x00, 0x1140);
-	}
-	mdelay(100);
-
-	/* Request patch */
-	for (i = 0; i < 8; i++) {
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH);
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x10, 0x0010);
-	}
-
-	mdelay(300);
-
-	/* Verify patch readiness */
-	for (i = 0; i < 8; i++) {
-		for (l = 0; l < 100; l++) {
-			val = phy_package_port_read_paged(phydev, i, RTL821X_PAGE_STATE, 0x10);
-			if (val & 0x40)
-				break;
-		}
-		if (l >= 100) {
-			phydev_err(phydev, "Could not patch PHY\n");
-			return -1;
-		}
-	}
-
-	/* Use Broadcast ID method for patching */
-	rtl821x_phy_setup_package_broadcast(phydev, true);
-
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, 30, 8);
-	phy_write_paged(phydev, 0x26e, 17, 0xb);
-	phy_write_paged(phydev, 0x26e, 16, 0x2);
-	mdelay(1);
-	ipd = phy_read_paged(phydev, 0x26e, 19);
-	phy_write_paged(phydev, 0, 30, 0);
-	ipd = (ipd >> 4) & 0xf; /* unused ? */
-
-	i = 0;
-	while (rtl8218B_6276B_rtl8380_perport[i * 2]) {
-		phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8218B_6276B_rtl8380_perport[i * 2],
-				  rtl8218B_6276B_rtl8380_perport[i * 2 + 1]);
-		i++;
-	}
-
-	/*Disable broadcast ID*/
-	rtl821x_phy_setup_package_broadcast(phydev, false);
-
-	return 0;
-}
-
-static int rtl8218b_ext_match_phy_device(struct phy_device *phydev)
-{
-	int addr = phydev->mdio.addr;
-
-	/* Both the RTL8214FC and the external RTL8218B have the same
-	 * PHY ID. On the RTL838x, the RTL8218B can only be attached_dev
-	 * at PHY IDs 0-7, while the RTL8214FC must be attached via
-	 * the pair of SGMII/1000Base-X with higher PHY-IDs
-	 */
-	if (soc_info.family == RTL8380_FAMILY_ID)
-		return phydev->phy_id == PHY_ID_RTL8218B_E && addr < 8;
-	else
-		return phydev->phy_id == PHY_ID_RTL8218B_E;
-}
-
-static bool rtl8214fc_media_is_fibre(struct phy_device *phydev)
-{
-	int mac = phydev->mdio.addr;
-
-	static int reg[] = {16, 19, 20, 21};
-	u32 val;
-
-	phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
-	val = phy_package_read_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4]);
-	phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
-
-	if (val & BIT(11))
-		return false;
-
-	return true;
-}
-
-static void rtl8214fc_power_set(struct phy_device *phydev, int port, bool on)
-{
-	char *state = on ? "on" : "off";
-
-	if (port == PORT_FIBRE) {
-		pr_info("%s: Powering %s FIBRE (port %d)\n", __func__, state, phydev->mdio.addr);
-		phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
-	} else {
-		pr_info("%s: Powering %s COPPER (port %d)\n", __func__, state, phydev->mdio.addr);
-		phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
-	}
-
-	if (on) {
-		phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, BIT(11), 0);
-	} else {
-		phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, 0, BIT(11));
-	}
-
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
-}
-
-static int rtl8214fc_suspend(struct phy_device *phydev)
-{
-	rtl8214fc_power_set(phydev, PORT_MII, false);
-	rtl8214fc_power_set(phydev, PORT_FIBRE, false);
-
-	return 0;
-}
-
-static int rtl8214fc_resume(struct phy_device *phydev)
-{
-	if (rtl8214fc_media_is_fibre(phydev)) {
-		rtl8214fc_power_set(phydev, PORT_MII, false);
-		rtl8214fc_power_set(phydev, PORT_FIBRE, true);
-	} else {
-		rtl8214fc_power_set(phydev, PORT_FIBRE, false);
-		rtl8214fc_power_set(phydev, PORT_MII, true);
-	}
-
-	return 0;
-}
-
-static void rtl8214fc_media_set(struct phy_device *phydev, bool set_fibre)
-{
-	int mac = phydev->mdio.addr;
-
-	static int reg[] = {16, 19, 20, 21};
-	int val;
-
-	pr_info("%s: port %d, set_fibre: %d\n", __func__, mac, set_fibre);
-	phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
-	val = phy_package_read_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4]);
-
-	val |= BIT(10);
-	if (set_fibre) {
-		val &= ~BIT(11);
-	} else {
-		val |= BIT(11);
-	}
-
-	phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
-	phy_package_write_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4], val);
-	phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
-
-	if (!phydev->suspended) {
-		if (set_fibre) {
-			rtl8214fc_power_set(phydev, PORT_MII, false);
-			rtl8214fc_power_set(phydev, PORT_FIBRE, true);
-		} else {
-			rtl8214fc_power_set(phydev, PORT_FIBRE, false);
-			rtl8214fc_power_set(phydev, PORT_MII, true);
-		}
-	}
-}
-
-static int rtl8214fc_set_port(struct phy_device *phydev, int port)
-{
-	bool is_fibre = (port == PORT_FIBRE ? true : false);
-	int addr = phydev->mdio.addr;
-
-	pr_debug("%s port %d to %d\n", __func__, addr, port);
-
-	rtl8214fc_media_set(phydev, is_fibre);
-	return 0;
-}
-
-static int rtl8214fc_get_port(struct phy_device *phydev)
-{
-	int addr = phydev->mdio.addr;
-
-	pr_debug("%s: port %d\n", __func__, addr);
-	if (rtl8214fc_media_is_fibre(phydev))
-		return PORT_FIBRE;
-	return PORT_MII;
-}
-
-/*
- * Enable EEE on the RTL8218B PHYs
- * The method used is not the preferred way (which would be based on the MAC-EEE state,
- * but the only way that works since the kernel first enables EEE in the MAC
- * and then sets up the PHY. The MAC-based approach would require the oppsite.
- */
-void rtl8218d_eee_set(struct phy_device *phydev, bool enable)
-{
-	u32 val;
-	bool an_enabled;
-
-	pr_debug("In %s %d, enable %d\n", __func__, phydev->mdio.addr, enable);
-	/* Set GPHY page to copper */
-	phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
-
-	val = phy_read(phydev, 0);
-	an_enabled = val & BIT(12);
-
-	/* Enable 100M (bit 1) / 1000M (bit 2) EEE */
-	val = phy_read_mmd(phydev, 7, 60);
-	val |= BIT(2) | BIT(1);
-	phy_write_mmd(phydev, 7, 60, enable ? 0x6 : 0);
-
-	/* 500M EEE ability */
-	val = phy_read_paged(phydev, RTL821X_PAGE_GPHY, 20);
-	if (enable)
-		val |= BIT(7);
-	else
-		val &= ~BIT(7);
-	phy_write_paged(phydev, RTL821X_PAGE_GPHY, 20, val);
-
-	/* Restart AN if enabled */
-	if (an_enabled) {
-		val = phy_read(phydev, 0);
-		val |= BIT(9);
-		phy_write(phydev, 0, val);
-	}
-
-	/* GPHY page back to auto*/
-	phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
-}
-
-static int rtl8218b_get_eee(struct phy_device *phydev,
-				     struct ethtool_eee *e)
-{
-	u32 val;
-	int addr = phydev->mdio.addr;
-
-	pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled);
-
-	/* Set GPHY page to copper */
-	phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
-
-	val = phy_read_paged(phydev, 7, 60);
-	if (e->eee_enabled) {
-		// Verify vs MAC-based EEE
-		e->eee_enabled = !!(val & BIT(7));
-		if (!e->eee_enabled) {
-			val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25);
-			e->eee_enabled = !!(val & BIT(4));
-		}
-	}
-	pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled);
-
-	/* GPHY page to auto */
-	phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
-
-	return 0;
-}
-
-static int rtl8218d_get_eee(struct phy_device *phydev,
-				     struct ethtool_eee *e)
-{
-	u32 val;
-	int addr = phydev->mdio.addr;
-
-	pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled);
-
-	/* Set GPHY page to copper */
-	phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
-
-	val = phy_read_paged(phydev, 7, 60);
-	if (e->eee_enabled)
-		e->eee_enabled = !!(val & BIT(7));
-	pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled);
-
-	/* GPHY page to auto */
-	phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
-
-	return 0;
-}
-
-static int rtl8214fc_set_eee(struct phy_device *phydev,
-				     struct ethtool_eee *e)
-{
-	u32 poll_state;
-	int port = phydev->mdio.addr;
-	bool an_enabled;
-	u32 val;
-
-	pr_debug("In %s port %d, enabled %d\n", __func__, port, e->eee_enabled);
-
-	if (rtl8214fc_media_is_fibre(phydev)) {
-		netdev_err(phydev->attached_dev, "Port %d configured for FIBRE", port);
-		return -ENOTSUPP;
-	}
-
-	poll_state = disable_polling(port);
-
-	/* Set GPHY page to copper */
-	phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
-
-	// Get auto-negotiation status
-	val = phy_read(phydev, 0);
-	an_enabled = val & BIT(12);
-
-	pr_info("%s: aneg: %d\n", __func__, an_enabled);
-	val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25);
-	val &= ~BIT(5);  // Use MAC-based EEE
-	phy_write_paged(phydev, RTL821X_PAGE_MAC, 25, val);
-
-	/* Enable 100M (bit 1) / 1000M (bit 2) EEE */
-	phy_write_paged(phydev, 7, 60, e->eee_enabled ? 0x6 : 0);
-
-	/* 500M EEE ability */
-	val = phy_read_paged(phydev, RTL821X_PAGE_GPHY, 20);
-	if (e->eee_enabled)
-		val |= BIT(7);
-	else
-		val &= ~BIT(7);
-
-	phy_write_paged(phydev, RTL821X_PAGE_GPHY, 20, val);
-
-	/* Restart AN if enabled */
-	if (an_enabled) {
-		pr_info("%s: doing aneg\n", __func__);
-		val = phy_read(phydev, 0);
-		val |= BIT(9);
-		phy_write(phydev, 0, val);
-	}
-
-	/* GPHY page back to auto*/
-	phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
-
-	resume_polling(poll_state);
-
-	return 0;
-}
-
-static int rtl8214fc_get_eee(struct phy_device *phydev,
-				      struct ethtool_eee *e)
-{
-	int addr = phydev->mdio.addr;
-
-	pr_debug("In %s port %d, enabled %d\n", __func__, addr, e->eee_enabled);
-	if (rtl8214fc_media_is_fibre(phydev)) {
-		netdev_err(phydev->attached_dev, "Port %d configured for FIBRE", addr);
-		return -ENOTSUPP;
-	}
-
-	return rtl8218b_get_eee(phydev, e);
-}
-
-static int rtl8218b_set_eee(struct phy_device *phydev, struct ethtool_eee *e)
-{
-	int port = phydev->mdio.addr;
-	u64 poll_state;
-	u32 val;
-	bool an_enabled;
-
-	pr_info("In %s, port %d, enabled %d\n", __func__, port, e->eee_enabled);
-
-	poll_state = disable_polling(port);
-
-	/* Set GPHY page to copper */
-	phy_write(phydev, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
-	val = phy_read(phydev, 0);
-	an_enabled = val & BIT(12);
-
-	if (e->eee_enabled) {
-		/* 100/1000M EEE Capability */
-		phy_write(phydev, 13, 0x0007);
-		phy_write(phydev, 14, 0x003C);
-		phy_write(phydev, 13, 0x4007);
-		phy_write(phydev, 14, 0x0006);
-
-		val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25);
-		val |= BIT(4);
-		phy_write_paged(phydev, RTL821X_PAGE_MAC, 25, val);
-	} else {
-		/* 100/1000M EEE Capability */
-		phy_write(phydev, 13, 0x0007);
-		phy_write(phydev, 14, 0x003C);
-		phy_write(phydev, 13, 0x0007);
-		phy_write(phydev, 14, 0x0000);
-
-		val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25);
-		val &= ~BIT(4);
-		phy_write_paged(phydev, RTL821X_PAGE_MAC, 25, val);
-	}
-
-	/* Restart AN if enabled */
-	if (an_enabled) {
-		val = phy_read(phydev, 0);
-		val |= BIT(9);
-		phy_write(phydev, 0, val);
-	}
-
-	/* GPHY page back to auto*/
-	phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
-
-	pr_info("%s done\n", __func__);
-	resume_polling(poll_state);
-
-	return 0;
-}
-
-static int rtl8218d_set_eee(struct phy_device *phydev, struct ethtool_eee *e)
-{
-	int addr = phydev->mdio.addr;
-	u64 poll_state;
-
-	pr_info("In %s, port %d, enabled %d\n", __func__, addr, e->eee_enabled);
-
-	poll_state = disable_polling(addr);
-
-	rtl8218d_eee_set(phydev, (bool) e->eee_enabled);
-
-	resume_polling(poll_state);
-
-	return 0;
-}
-
-static int rtl8214c_match_phy_device(struct phy_device *phydev)
-{
-	return phydev->phy_id == PHY_ID_RTL8214C;
-}
-
-static int rtl8380_configure_rtl8214c(struct phy_device *phydev)
-{
-	u32 phy_id, val;
-	int mac = phydev->mdio.addr;
-
-	val = phy_read(phydev, 2);
-	phy_id = val << 16;
-	val = phy_read(phydev, 3);
-	phy_id |= val;
-	pr_debug("Phy on MAC %d: %x\n", mac, phy_id);
-
-	phydev_info(phydev, "Detected external RTL8214C\n");
-
-	/* GPHY auto conf */
-	phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
-	return 0;
-}
-
-static int rtl8380_configure_rtl8214fc(struct phy_device *phydev)
-{
-	u32 phy_id, val, page = 0;
-	int i, l;
-	int mac = phydev->mdio.addr;
-	struct fw_header *h;
-	u32 *rtl8380_rtl8214fc_perchip;
-	u32 *rtl8380_rtl8214fc_perport;
-
-	val = phy_read(phydev, 2);
-	phy_id = val << 16;
-	val = phy_read(phydev, 3);
-	phy_id |= val;
-	pr_debug("Phy on MAC %d: %x\n", mac, phy_id);
-
-	/* Read internal PHY id */
-	phy_write_paged(phydev, 0, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
-	phy_write_paged(phydev, 0x1f, 0x1b, 0x0002);
-	val = phy_read_paged(phydev, 0x1f, 0x1c);
-	if (val != 0x6276) {
-		phydev_err(phydev, "Expected external RTL8214FC, found PHY-ID %x\n", val);
-		return -1;
-	}
-	phydev_info(phydev, "Detected external RTL8214FC\n");
-
-	h = rtl838x_request_fw(phydev, &rtl838x_8214fc_fw, FIRMWARE_838X_8214FC_1);
-	if (!h)
-		return -1;
-
-	if (h->phy != 0x8214fc00) {
-		phydev_err(phydev, "Wrong firmware file: PHY mismatch.\n");
-		return -1;
-	}
-
-	rtl8380_rtl8214fc_perchip = (void *)h + sizeof(struct fw_header)
-		   + h->parts[0].start;
-
-	rtl8380_rtl8214fc_perport = (void *)h + sizeof(struct fw_header)
-		   + h->parts[1].start;
-
-	/* detect phy version */
-	phy_write_paged(phydev, RTL83XX_PAGE_RAW, 27, 0x0004);
-	val = phy_read_paged(phydev, RTL83XX_PAGE_RAW, 28);
-
-	val = phy_read(phydev, 16);
-	if (val & (1 << 11))
-		rtl8380_rtl8214fc_on_off(phydev, true);
-	else
-		rtl8380_phy_reset(phydev);
-
-	msleep(100);
-	phy_write_paged(phydev, 0, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
-
-	i = 0;
-	while (rtl8380_rtl8214fc_perchip[i * 3]
-	       && rtl8380_rtl8214fc_perchip[i * 3 + 1]) {
-		if (rtl8380_rtl8214fc_perchip[i * 3 + 1] == 0x1f)
-			page = rtl8380_rtl8214fc_perchip[i * 3 + 2];
-		if (rtl8380_rtl8214fc_perchip[i * 3 + 1] == 0x13 && page == 0x260) {
-			val = phy_read_paged(phydev, 0x260, 13);
-			val = (val & 0x1f00) | (rtl8380_rtl8214fc_perchip[i * 3 + 2]
-				& 0xe0ff);
-			phy_write_paged(phydev, RTL83XX_PAGE_RAW,
-					rtl8380_rtl8214fc_perchip[i * 3 + 1], val);
-		} else {
-			phy_write_paged(phydev, RTL83XX_PAGE_RAW,
-					rtl8380_rtl8214fc_perchip[i * 3 + 1],
-					rtl8380_rtl8214fc_perchip[i * 3 + 2]);
-		}
-		i++;
-	}
-
-	/* Force copper medium */
-	for (i = 0; i < 4; i++) {
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
-	}
-
-	/* Enable PHY */
-	for (i = 0; i < 4; i++) {
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x00, 0x1140);
-	}
-	mdelay(100);
-
-	/* Disable Autosensing */
-	for (i = 0; i < 4; i++) {
-		for (l = 0; l < 100; l++) {
-			val = phy_package_port_read_paged(phydev, i, RTL821X_PAGE_GPHY, 0x10);
-			if ((val & 0x7) >= 3)
-				break;
-		}
-		if (l >= 100) {
-			phydev_err(phydev, "Could not disable autosensing\n");
-			return -1;
-		}
-	}
-
-	/* Request patch */
-	for (i = 0; i < 4; i++) {
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH);
-		phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x10, 0x0010);
-	}
-	mdelay(300);
-
-	/* Verify patch readiness */
-	for (i = 0; i < 4; i++) {
-		for (l = 0; l < 100; l++) {
-			val = phy_package_port_read_paged(phydev, i, RTL821X_PAGE_STATE, 0x10);
-			if (val & 0x40)
-				break;
-		}
-		if (l >= 100) {
-			phydev_err(phydev, "Could not patch PHY\n");
-			return -1;
-		}
-	}
-	/* Use Broadcast ID method for patching */
-	rtl821x_phy_setup_package_broadcast(phydev, true);
-
-	i = 0;
-	while (rtl8380_rtl8214fc_perport[i * 2]) {
-		phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8380_rtl8214fc_perport[i * 2],
-				  rtl8380_rtl8214fc_perport[i * 2 + 1]);
-		i++;
-	}
-
-	/*Disable broadcast ID*/
-	rtl821x_phy_setup_package_broadcast(phydev, false);
-
-	/* Auto medium selection */
-	for (i = 0; i < 4; i++) {
-		phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN);
-		phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
-	}
-
-	return 0;
-}
-
-static int rtl8214fc_match_phy_device(struct phy_device *phydev)
-{
-	int addr = phydev->mdio.addr;
-
-	return phydev->phy_id == PHY_ID_RTL8214FC && addr >= 24;
-}
-
-static int rtl8380_configure_serdes(struct phy_device *phydev)
-{
-	u32 v;
-	u32 sds_conf_value;
-	int i;
-	struct fw_header *h;
-	u32 *rtl8380_sds_take_reset;
-	u32 *rtl8380_sds_common;
-	u32 *rtl8380_sds01_qsgmii_6275b;
-	u32 *rtl8380_sds23_qsgmii_6275b;
-	u32 *rtl8380_sds4_fiber_6275b;
-	u32 *rtl8380_sds5_fiber_6275b;
-	u32 *rtl8380_sds_reset;
-	u32 *rtl8380_sds_release_reset;
-
-	phydev_info(phydev, "Detected internal RTL8380 SERDES\n");
-
-	h = rtl838x_request_fw(phydev, &rtl838x_8218b_fw, FIRMWARE_838X_8380_1);
-	if (!h)
-		return -1;
-
-	if (h->magic != 0x83808380) {
-		phydev_err(phydev, "Wrong firmware file: magic number mismatch.\n");
-		return -1;
-	}
-
-	rtl8380_sds_take_reset = (void *)h + sizeof(struct fw_header)
-		   + h->parts[0].start;
-
-	rtl8380_sds_common = (void *)h + sizeof(struct fw_header)
-		   + h->parts[1].start;
-
-	rtl8380_sds01_qsgmii_6275b = (void *)h + sizeof(struct fw_header)
-		   + h->parts[2].start;
-
-	rtl8380_sds23_qsgmii_6275b = (void *)h + sizeof(struct fw_header)
-		   + h->parts[3].start;
-
-	rtl8380_sds4_fiber_6275b = (void *)h + sizeof(struct fw_header)
-		   + h->parts[4].start;
-
-	rtl8380_sds5_fiber_6275b = (void *)h + sizeof(struct fw_header)
-		   + h->parts[5].start;
-
-	rtl8380_sds_reset = (void *)h + sizeof(struct fw_header)
-		   + h->parts[6].start;
-
-	rtl8380_sds_release_reset = (void *)h + sizeof(struct fw_header)
-		   + h->parts[7].start;
-
-	/* Back up serdes power off value */
-	sds_conf_value = sw_r32(RTL838X_SDS_CFG_REG);
-	pr_info("SDS power down value: %x\n", sds_conf_value);
-
-	/* take serdes into reset */
-	i = 0;
-	while (rtl8380_sds_take_reset[2 * i]) {
-		sw_w32(rtl8380_sds_take_reset[2 * i + 1], rtl8380_sds_take_reset[2 * i]);
-		i++;
-		udelay(1000);
-	}
-
-	/* apply common serdes patch */
-	i = 0;
-	while (rtl8380_sds_common[2 * i]) {
-		sw_w32(rtl8380_sds_common[2 * i + 1], rtl8380_sds_common[2 * i]);
-		i++;
-		udelay(1000);
-	}
-
-	/* internal R/W enable */
-	sw_w32(3, RTL838X_INT_RW_CTRL);
-
-	/* SerDes ports 4 and 5 are FIBRE ports */
-	sw_w32_mask(0x7 | 0x38, 1 | (1 << 3), RTL838X_INT_MODE_CTRL);
-
-	/* SerDes module settings, SerDes 0-3 are QSGMII */
-	v = 0x6 << 25 | 0x6 << 20 | 0x6 << 15 | 0x6 << 10;
-	/* SerDes 4 and 5 are 1000BX FIBRE */
-	v |= 0x4 << 5 | 0x4;
-	sw_w32(v, RTL838X_SDS_MODE_SEL);
-
-	pr_info("PLL control register: %x\n", sw_r32(RTL838X_PLL_CML_CTRL));
-	sw_w32_mask(0xfffffff0, 0xaaaaaaaf & 0xf, RTL838X_PLL_CML_CTRL);
-	i = 0;
-	while (rtl8380_sds01_qsgmii_6275b[2 * i]) {
-		sw_w32(rtl8380_sds01_qsgmii_6275b[2 * i + 1],
-			rtl8380_sds01_qsgmii_6275b[2 * i]);
-		i++;
-	}
-
-	i = 0;
-	while (rtl8380_sds23_qsgmii_6275b[2 * i]) {
-		sw_w32(rtl8380_sds23_qsgmii_6275b[2 * i + 1], rtl8380_sds23_qsgmii_6275b[2 * i]);
-		i++;
-	}
-
-	i = 0;
-	while (rtl8380_sds4_fiber_6275b[2 * i]) {
-		sw_w32(rtl8380_sds4_fiber_6275b[2 * i + 1], rtl8380_sds4_fiber_6275b[2 * i]);
-		i++;
-	}
-
-	i = 0;
-	while (rtl8380_sds5_fiber_6275b[2 * i]) {
-		sw_w32(rtl8380_sds5_fiber_6275b[2 * i + 1], rtl8380_sds5_fiber_6275b[2 * i]);
-		i++;
-	}
-
-	i = 0;
-	while (rtl8380_sds_reset[2 * i]) {
-		sw_w32(rtl8380_sds_reset[2 * i + 1], rtl8380_sds_reset[2 * i]);
-		i++;
-	}
-
-	i = 0;
-	while (rtl8380_sds_release_reset[2 * i]) {
-		sw_w32(rtl8380_sds_release_reset[2 * i + 1], rtl8380_sds_release_reset[2 * i]);
-		i++;
-	}
-
-	pr_info("SDS power down value now: %x\n", sw_r32(RTL838X_SDS_CFG_REG));
-	sw_w32(sds_conf_value, RTL838X_SDS_CFG_REG);
-
-	pr_info("Configuration of SERDES done\n");
-	return 0;
-}
-
-static int rtl8390_configure_serdes(struct phy_device *phydev)
-{
-	phydev_info(phydev, "Detected internal RTL8390 SERDES\n");
-
-	/* In autoneg state, force link, set SR4_CFG_EN_LINK_FIB1G */
-	sw_w32_mask(0, 1 << 18, RTL839X_SDS12_13_XSG0 + 0x0a);
-
-	/* Disable EEE: Clear FRE16_EEE_RSG_FIB1G, FRE16_EEE_STD_FIB1G,
-	 * FRE16_C1_PWRSAV_EN_FIB1G, FRE16_C2_PWRSAV_EN_FIB1G
-	 * and FRE16_EEE_QUIET_FIB1G
-	 */
-	sw_w32_mask(0x1f << 10, 0, RTL839X_SDS12_13_XSG0 + 0xe0);
-
-	return 0;
-}
-
-void rtl9300_sds_field_w(int sds, u32 page, u32 reg, int end_bit, int start_bit, u32 v)
-{
-	int l = end_bit - start_bit + 1;
-	u32 data = v;
-
-	if (l < 32) {
-		u32 mask = BIT(l) - 1;
-
-		data = rtl930x_read_sds_phy(sds, page, reg);
-		data &= ~(mask << start_bit);
-		data |= (v & mask) << start_bit;
-	}
-
-	rtl930x_write_sds_phy(sds, page, reg, data);
-}
-
-u32 rtl9300_sds_field_r(int sds, u32 page, u32 reg, int end_bit, int start_bit)
-{
-	int l = end_bit - start_bit + 1;
-	u32 v = rtl930x_read_sds_phy(sds, page, reg);
-
-	if (l >= 32)
-		return v;
-
-	return (v >> start_bit) & (BIT(l) - 1);
-}
-
-/* Read the link and speed status of the internal SerDes of the RTL9300
- */
-static int rtl9300_read_status(struct phy_device *phydev)
-{
-	struct device *dev = &phydev->mdio.dev;
-	int phy_addr = phydev->mdio.addr;
-	struct device_node *dn;
-	u32 sds_num = 0, status, latch_status, mode;
-
-	if (dev->of_node) {
-		dn = dev->of_node;
-
-		if (of_property_read_u32(dn, "sds", &sds_num))
-			sds_num = -1;
-		pr_info("%s: Port %d, SerDes is %d\n", __func__, phy_addr, sds_num);
-	} else {
-		dev_err(dev, "No DT node.\n");
-		return -EINVAL;
-	}
-
-	if (sds_num < 0)
-		return 0;
-
-	mode = rtl9300_sds_mode_get(sds_num);
-	pr_info("%s got SDS mode %02x\n", __func__, mode);
-	if (mode == 0x1a) {		// 10GR mode
-		status = rtl9300_sds_field_r(sds_num, 0x5, 0, 12, 12);
-		latch_status = rtl9300_sds_field_r(sds_num, 0x4, 1, 2, 2);
-		status |= rtl9300_sds_field_r(sds_num, 0x5, 0, 12, 12);
-		latch_status |= rtl9300_sds_field_r(sds_num, 0x4, 1, 2, 2);
-	} else {
-		status = rtl9300_sds_field_r(sds_num, 0x1, 29, 8, 0);
-		latch_status = rtl9300_sds_field_r(sds_num, 0x1, 30, 8, 0);
-		status |= rtl9300_sds_field_r(sds_num, 0x1, 29, 8, 0);
-		latch_status |= rtl9300_sds_field_r(sds_num, 0x1, 30, 8, 0);
-	}
-
-	pr_info("%s link status: status: %d, latch %d\n", __func__, status, latch_status);
-
-	if (latch_status) {
-		phydev->link = true;
-		if (mode == 0x1a)
-			phydev->speed = SPEED_10000;
-		else
-			phydev->speed = SPEED_1000;
-
-		phydev->duplex = DUPLEX_FULL;
-	}
-
-	return 0;
-}
-
-void rtl930x_sds_rx_rst(int sds_num, phy_interface_t phy_if)
-{
-	int page = 0x2e; // 10GR and USXGMII
-
-	if (phy_if == PHY_INTERFACE_MODE_1000BASEX)
-		page = 0x24;
-
-	rtl9300_sds_field_w(sds_num, page, 0x15, 4, 4, 0x1);
-	mdelay(5);
-	rtl9300_sds_field_w(sds_num, page, 0x15, 4, 4, 0x0);
-}
-
-/*
- * Force PHY modes on 10GBit Serdes
- */
-void rtl9300_force_sds_mode(int sds, phy_interface_t phy_if)
-{
-	int sds_mode;
-	bool lc_on;
-	int i, lc_value;
-	int lane_0 = (sds % 2) ? sds - 1 : sds;
-	u32 v, cr_0, cr_1, cr_2;
-	u32 m_bit, l_bit;
-
-	pr_info("%s: SDS: %d, mode %d\n", __func__, sds, phy_if);
-	switch (phy_if) {
-	case PHY_INTERFACE_MODE_SGMII:
-		sds_mode = 0x2;
-		lc_on = false;
-		lc_value = 0x1;
-		break;
-
-	case PHY_INTERFACE_MODE_HSGMII:
-		sds_mode = 0x12;
-		lc_value = 0x3;
-		// Configure LC
-		break;
-
-	case PHY_INTERFACE_MODE_1000BASEX:
-		sds_mode = 0x04;
-		lc_on = false;
-		break;
-
-	case PHY_INTERFACE_MODE_2500BASEX:
-		sds_mode = 0x16;
-		lc_value = 0x3;
-		// Configure LC
-		break;
-
-	case PHY_INTERFACE_MODE_10GBASER:
-		sds_mode = 0x1a;
-		lc_on = true;
-		lc_value = 0x5;
-		break;
-
-	case PHY_INTERFACE_MODE_NA:
-		// This will disable SerDes
-		sds_mode = 0x1f;
-		break;
-
-	default:
-		pr_err("%s: unknown serdes mode: %s\n",
-		       __func__, phy_modes(phy_if));
-		return;
-	}
-
-	pr_info("%s --------------------- serdes %d forcing to %x ...\n", __func__, sds, sds_mode);
-	// Power down SerDes
-	rtl9300_sds_field_w(sds, 0x20, 0, 7, 6, 0x3);
-	if (sds == 5) pr_info("%s after %x\n", __func__, rtl930x_read_sds_phy(sds, 0x20, 0));
-
-	if (sds == 5) pr_info("%s a %x\n", __func__, rtl930x_read_sds_phy(sds, 0x1f, 9));
-	// Force mode enable
-	rtl9300_sds_field_w(sds, 0x1f, 9, 6, 6, 0x1);
-	if (sds == 5) pr_info("%s b %x\n", __func__, rtl930x_read_sds_phy(sds, 0x1f, 9));
-
-	/* SerDes off */
-	rtl9300_sds_field_w(sds, 0x1f, 9, 11, 7, 0x1f);
-
-	if (phy_if == PHY_INTERFACE_MODE_NA)
-		return;
-
-	if (sds == 5) pr_info("%s c %x\n", __func__, rtl930x_read_sds_phy(sds, 0x20, 18));
-	// Enable LC and ring
-	rtl9300_sds_field_w(lane_0, 0x20, 18, 3, 0, 0xf);
-
-	if (sds == lane_0)
-		rtl9300_sds_field_w(lane_0, 0x20, 18, 5, 4, 0x1);
-	else
-		rtl9300_sds_field_w(lane_0, 0x20, 18, 7, 6, 0x1);
-
-	rtl9300_sds_field_w(sds, 0x20, 0, 5, 4, 0x3);
-
-	if (lc_on)
-		rtl9300_sds_field_w(lane_0, 0x20, 18, 11, 8, lc_value);
-	else
-		rtl9300_sds_field_w(lane_0, 0x20, 18, 15, 12, lc_value);
-
-	// Force analog LC & ring on
-	rtl9300_sds_field_w(lane_0, 0x21, 11, 3, 0, 0xf);
-
-	v = lc_on ? 0x3 : 0x1;
-
-	if (sds == lane_0)
-		rtl9300_sds_field_w(lane_0, 0x20, 18, 5, 4, v);
-	else
-		rtl9300_sds_field_w(lane_0, 0x20, 18, 7, 6, v);
-
-	// Force SerDes mode
-	rtl9300_sds_field_w(sds, 0x1f, 9, 6, 6, 1);
-	rtl9300_sds_field_w(sds, 0x1f, 9, 11, 7, sds_mode);
-
-	// Toggle LC or Ring
-	for (i = 0; i < 20; i++) {
-		mdelay(200);
-
-		rtl930x_write_sds_phy(lane_0, 0x1f, 2, 53);
-
-		m_bit = (lane_0 == sds) ? (4) : (5);
-		l_bit = (lane_0 == sds) ? (4) : (5);
-
-		cr_0 = rtl9300_sds_field_r(lane_0, 0x1f, 20, m_bit, l_bit);
-		mdelay(10);
-		cr_1 = rtl9300_sds_field_r(lane_0, 0x1f, 20, m_bit, l_bit);
-		mdelay(10);
-		cr_2 = rtl9300_sds_field_r(lane_0, 0x1f, 20, m_bit, l_bit);
-
-		if (cr_0 && cr_1 && cr_2) {
-			u32 t;
-			if (phy_if != PHY_INTERFACE_MODE_10GBASER)
-				break;
-
-			t = rtl9300_sds_field_r(sds, 0x6, 0x1, 2, 2);
-			rtl9300_sds_field_w(sds, 0x6, 0x1, 2, 2, 0x1);
-
-			// Reset FSM
-			rtl9300_sds_field_w(sds, 0x6, 0x2, 12, 12, 0x1);
-			mdelay(10);
-			rtl9300_sds_field_w(sds, 0x6, 0x2, 12, 12, 0x0);
-			mdelay(10);
-
-			// Need to read this twice
-			v = rtl9300_sds_field_r(sds, 0x5, 0, 12, 12);
-			v = rtl9300_sds_field_r(sds, 0x5, 0, 12, 12);
-
-			rtl9300_sds_field_w(sds, 0x6, 0x1, 2, 2, t);
-
-			// Reset FSM again
-			rtl9300_sds_field_w(sds, 0x6, 0x2, 12, 12, 0x1);
-			mdelay(10);
-			rtl9300_sds_field_w(sds, 0x6, 0x2, 12, 12, 0x0);
-			mdelay(10);
-
-			if (v == 1)
-				break;
-		}
-
-		m_bit = (phy_if == PHY_INTERFACE_MODE_10GBASER) ? 3 : 1;
-		l_bit = (phy_if == PHY_INTERFACE_MODE_10GBASER) ? 2 : 0;
-
-		rtl9300_sds_field_w(lane_0, 0x21, 11, m_bit, l_bit, 0x2);
-		mdelay(10);
-		rtl9300_sds_field_w(lane_0, 0x21, 11, m_bit, l_bit, 0x3);
-	}
-
-	rtl930x_sds_rx_rst(sds, phy_if);
-
-	// Re-enable power
-	rtl9300_sds_field_w(sds, 0x20, 0, 7, 6, 0);
-
-	pr_info("%s --------------------- serdes %d forced to %x DONE\n", __func__, sds, sds_mode);
-}
-
-void rtl9300_sds_tx_config(int sds, phy_interface_t phy_if)
-{
-	// parameters: rtl9303_80G_txParam_s2
-	int impedance = 0x8;
-	int pre_amp = 0x2;
-	int main_amp = 0x9;
-	int post_amp = 0x2;
-	int pre_en = 0x1;
-	int post_en = 0x1;
-	int page;
-
-	switch(phy_if) {
-	case PHY_INTERFACE_MODE_1000BASEX:
-		page = 0x25;
-		break;
-	case PHY_INTERFACE_MODE_HSGMII:
-	case PHY_INTERFACE_MODE_2500BASEX:
-		page = 0x29;
-		break;
-	case PHY_INTERFACE_MODE_10GBASER:
-		page = 0x2f;
-		break;
-	default:
-		pr_err("%s: unsupported PHY mode\n", __func__);
-		return;
-	}
-
-	rtl9300_sds_field_w(sds, page, 0x1, 15, 11, pre_amp);
-	rtl9300_sds_field_w(sds, page, 0x7, 0, 0, pre_en);
-	rtl9300_sds_field_w(sds, page, 0x7, 8, 4, main_amp);
-	rtl9300_sds_field_w(sds, page, 0x6, 4, 0, post_amp);
-	rtl9300_sds_field_w(sds, page, 0x7, 3, 3, post_en);
-	rtl9300_sds_field_w(sds, page, 0x18, 15, 12, impedance);
-}
-
-/*
- * Wait for clock ready, this assumes the SerDes is in XGMII mode
- * timeout is in ms
- */
-int rtl9300_sds_clock_wait(int timeout)
-{
-	u32 v;
-	unsigned long start = jiffies;
-
-	do {
-		rtl9300_sds_field_w(2, 0x1f, 0x2, 15, 0, 53);
-		v = rtl9300_sds_field_r(2, 0x1f, 20, 5, 4);
-		if (v == 3)
-			return 0;
-	} while (jiffies < start + (HZ / 1000) * timeout);
-
-	return 1;
-}
-
-void rtl9300_serdes_mac_link_config(int sds, bool tx_normal, bool rx_normal)
-{
-	u32 v10, v1;
-
-	v10 = rtl930x_read_sds_phy(sds, 6, 2); // 10GBit, page 6, reg 2
-	v1 = rtl930x_read_sds_phy(sds, 0, 0); // 1GBit, page 0, reg 0
-	pr_info("%s: registers before %08x %08x\n", __func__, v10, v1);
-
-	v10 &= ~(BIT(13) | BIT(14));
-	v1 &= ~(BIT(8) | BIT(9));
-
-	v10 |= rx_normal ? 0 : BIT(13);
-	v1 |= rx_normal ? 0 : BIT(9);
-
-	v10 |= tx_normal ? 0 : BIT(14);
-	v1 |= tx_normal ? 0 : BIT(8);
-
-	rtl930x_write_sds_phy(sds, 6, 2, v10);
-	rtl930x_write_sds_phy(sds, 0, 0, v1);
-
-	v10 = rtl930x_read_sds_phy(sds, 6, 2);
-	v1 = rtl930x_read_sds_phy(sds, 0, 0);
-	pr_info("%s: registers after %08x %08x\n", __func__, v10, v1);
-}
-
-void rtl9300_sds_rxcal_dcvs_manual(u32 sds_num, u32 dcvs_id, bool manual, u32 dvcs_list[])
-{
-	if (manual) {
-		switch(dcvs_id) {
-		case 0:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 14, 14, 0x1);
-			rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 5, 5, dvcs_list[0]);
-			rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 4, 0, dvcs_list[1]);
-			break;
-		case 1:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 13, 13, 0x1);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 15, 15, dvcs_list[0]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 14, 11, dvcs_list[1]);
-			break;
-		case 2:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 12, 12, 0x1);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 10, 10, dvcs_list[0]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 9, 6, dvcs_list[1]);
-			break;
-		case 3:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 11, 11, 0x1);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 5, 5, dvcs_list[0]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 4, 1, dvcs_list[1]);
-			break;
-		case 4:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x01, 15, 15, 0x1);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 10, 10, dvcs_list[0]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 9, 6, dvcs_list[1]);
-			break;
-		case 5:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x02, 11, 11, 0x1);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 4, 4, dvcs_list[0]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 3, 0, dvcs_list[1]);
-			break;
-		default:
-			break;
-		}
-	} else {
-		switch(dcvs_id) {
-		case 0:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 14, 14, 0x0);
-			break;
-		case 1:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 13, 13, 0x0);
-			break;
-		case 2:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 12, 12, 0x0);
-			break;
-		case 3:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 11, 11, 0x0);
-			break;
-		case 4:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x01, 15, 15, 0x0);
-			break;
-		case 5:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x02, 11, 11, 0x0);
-			break;
-		default:
-			break;
-		}
-		mdelay(1);
-	}
-}
-
-void rtl9300_sds_rxcal_dcvs_get(u32 sds_num, u32 dcvs_id, u32 dcvs_list[])
-{
-	u32 dcvs_sign_out = 0, dcvs_coef_bin = 0;
-	bool dcvs_manual;
-
-	if (!(sds_num % 2))
-		rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f);
-	else
-		rtl930x_write_sds_phy(sds_num - 1, 0x1f, 0x2, 0x31);
-
-	// ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1]
-	rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1);
-
-	// ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[1 0 x x x x]
-	rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x20);
-
-	switch(dcvs_id) {
-	case 0:
-		rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x22);
-		mdelay(1);
-
-		// ##DCVS0 Read Out
-		dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4);
-		dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0);
-		dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 14, 14);
-		break;
-
-	case 1:
-		rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x23);
-		mdelay(1);
-
-		// ##DCVS0 Read Out
-		dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4);
-		dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0);
-		dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 13, 13);
-		break;
-
-	case 2:
-		rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x24);
-		mdelay(1);
-
-		// ##DCVS0 Read Out
-		dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4);
-		dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0);
-		dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 12, 12);
-		break;
-	case 3:
-		rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x25);
-		mdelay(1);
-
-		// ##DCVS0 Read Out
-		dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4);
-		dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0);
-		dcvs_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 11, 11);
-		break;
-
-	case 4:
-		rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x2c);
-		mdelay(1);
-
-		// ##DCVS0 Read Out
-		dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4);
-		dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0);
-		dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x01, 15, 15);
-		break;
-
-	case 5:
-		rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x2d);
-		mdelay(1);
-
-		// ##DCVS0 Read Out
-		dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4);
-		dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0);
-		dcvs_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x02, 11, 11);
-		break;
-
-	default:
-		break;
-	}
-
-	if (dcvs_sign_out)
-		pr_info("%s DCVS %u Sign: -", __func__, dcvs_id);
-	else
-		pr_info("%s DCVS %u Sign: +", __func__, dcvs_id);
-
-	pr_info("DCVS %u even coefficient = %u", dcvs_id, dcvs_coef_bin);
-	pr_info("DCVS %u manual = %u", dcvs_id, dcvs_manual);
-
-	dcvs_list[0] = dcvs_sign_out;
-	dcvs_list[1] = dcvs_coef_bin;
-}
-
-void rtl9300_sds_rxcal_leq_manual(u32 sds_num, bool manual, u32 leq_gray)
-{
-	if (manual) {
-		rtl9300_sds_field_w(sds_num, 0x2e, 0x18, 15, 15, 0x1);
-		rtl9300_sds_field_w(sds_num, 0x2e, 0x16, 14, 10, leq_gray);
-	} else {
-		rtl9300_sds_field_w(sds_num, 0x2e, 0x18, 15, 15, 0x0);
-		mdelay(100);
-	}
-}
-
-void rtl9300_sds_rxcal_leq_offset_manual(u32 sds_num, bool manual, u32 offset)
-{
-	if (manual) {
-		rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 6, 2, offset);
-	} else {
-		rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 6, 2, offset);
-		mdelay(1);
-	}
-}
-
-#define GRAY_BITS 5
-u32 rtl9300_sds_rxcal_gray_to_binary(u32 gray_code)
-{
-	int i, j, m;
-	u32 g[GRAY_BITS];
-	u32 c[GRAY_BITS];
-	u32 leq_binary = 0;
-
-	for(i = 0; i < GRAY_BITS; i++)
-		g[i] = (gray_code & BIT(i)) >> i;
-
-	m = GRAY_BITS - 1;
-
-	c[m] = g[m];
-
-	for(i = 0; i < m; i++) {
-		c[i] = g[i];
-		for(j  = i + 1; j < GRAY_BITS; j++)
-			c[i] = c[i] ^ g[j];
-	}
-
-	for(i = 0; i < GRAY_BITS; i++)
-		leq_binary += c[i] << i;
-
-	return leq_binary;
-}
-
-u32 rtl9300_sds_rxcal_leq_read(int sds_num)
-{
-	u32 leq_gray, leq_bin;
-	bool leq_manual;
-
-	if (!(sds_num % 2))
-		rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f);
-	else
-		rtl930x_write_sds_phy(sds_num - 1, 0x1f, 0x2, 0x31);
-
-	// ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1]
-	rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1);
-
-	// ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[0 1 x x x x]
-	rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x10);
-	mdelay(1);
-
-	// ##LEQ Read Out
-	leq_gray = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 7, 3);
-	leq_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x18, 15, 15);
-	leq_bin = rtl9300_sds_rxcal_gray_to_binary(leq_gray);
-
-	pr_info("LEQ_gray: %u, LEQ_bin: %u", leq_gray, leq_bin);
-	pr_info("LEQ manual: %u", leq_manual);
-
-	return leq_bin;
-}
-
-void rtl9300_sds_rxcal_vth_manual(u32 sds_num, bool manual, u32 vth_list[])
-{
-	if (manual) {
-		rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, 13, 13, 0x1);
-		rtl9300_sds_field_w(sds_num, 0x2e, 0x13, 5, 3, vth_list[0]);
-		rtl9300_sds_field_w(sds_num, 0x2e, 0x13, 2, 0, vth_list[1]);
-	} else {
-		rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, 13, 13, 0x0);
-		mdelay(10);
-	}
-}
-
-void rtl9300_sds_rxcal_vth_get(u32  sds_num, u32 vth_list[])
-{
-	u32 vth_manual;
-
-	//##Page0x1F, Reg0x02[15 0], REG_DBGO_SEL=[0x002F]; //Lane0
-	//##Page0x1F, Reg0x02[15 0], REG_DBGO_SEL=[0x0031]; //Lane1
-	if (!(sds_num % 2))
-		rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f);
-	else
-		rtl930x_write_sds_phy(sds_num - 1, 0x1f, 0x2, 0x31);
-
-	//##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1]
-	rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1);
-	//##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[1 0 x x x x]
-	rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x20);
-	//##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 1 1 0 0]
-	rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0xc);
-
-	mdelay(1);
-
-	//##VthP & VthN Read Out
-	vth_list[0] = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 2, 0); // v_thp set bin
-	vth_list[1] = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 3); // v_thn set bin
-
-	pr_info("vth_set_bin = %d", vth_list[0]);
-	pr_info("vth_set_bin = %d", vth_list[1]);
-
-	vth_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x0f, 13, 13);
-	pr_info("Vth Maunal = %d", vth_manual);
-}
-
-void rtl9300_sds_rxcal_tap_manual(u32 sds_num, int tap_id, bool manual, u32 tap_list[])
-{
-	if (manual) {
-		switch(tap_id) {
-		case 0:
-			//##REG0_LOAD_IN_INIT[0]=1; REG0_TAP0_INIT[5:0]=Tap0_Value
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1);
-			rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 5, 5, tap_list[0]);
-			rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 4, 0, tap_list[1]);
-			break;
-		case 1:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1);
-			rtl9300_sds_field_w(sds_num, 0x21, 0x07, 6, 6, tap_list[0]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x09, 11, 6, tap_list[1]);
-			rtl9300_sds_field_w(sds_num, 0x21, 0x07, 5, 5, tap_list[2]);
-			rtl9300_sds_field_w(sds_num, 0x2f, 0x12, 5, 0, tap_list[3]);
-			break;
-		case 2:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x09, 5, 5, tap_list[0]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x09, 4, 0, tap_list[1]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x0a, 11, 11, tap_list[2]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x0a, 10, 6, tap_list[3]);
-			break;
-		case 3:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x0a, 5, 5, tap_list[0]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x0a, 4, 0, tap_list[1]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x06, 5, 5, tap_list[2]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x06, 4, 0, tap_list[3]);
-			break;
-		case 4:
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1);
-			rtl9300_sds_field_w(sds_num, 0x2f, 0x01, 5, 5, tap_list[0]);
-			rtl9300_sds_field_w(sds_num, 0x2f, 0x01, 4, 0, tap_list[1]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x06, 11, 11, tap_list[2]);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x06, 10, 6, tap_list[3]);
-			break;
-		default:
-			break;
-		}
-	} else {
-		rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x0);
-		mdelay(10);
-	}
-}
-
-void rtl9300_sds_rxcal_tap_get(u32 sds_num, u32 tap_id, u32 tap_list[])
-{
-	u32 tap0_sign_out;
-	u32 tap0_coef_bin;
-	u32 tap_sign_out_even;
-	u32 tap_coef_bin_even;
-	u32 tap_sign_out_odd;
-	u32 tap_coef_bin_odd;
-	bool tap_manual;
-
-	if (!(sds_num % 2))
-		rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f);
-	else
-		rtl930x_write_sds_phy(sds_num - 1, 0x1f, 0x2, 0x31);
-
-	//##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1]
-	rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1);
-	//##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[1 0 x x x x]
-	rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x20);
-
-	if (!tap_id) {
-		//##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 0 0 0 1]
-		rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0);
-		//##Tap1 Even Read Out
-		mdelay(1);
-		tap0_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 5);
-		tap0_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 0);
-
-		if (tap0_sign_out == 1)
-			pr_info("Tap0 Sign : -");
-		else
-			pr_info("Tap0 Sign : +");
-
-		pr_info("tap0_coef_bin = %d", tap0_coef_bin);
-
-		tap_list[0] = tap0_sign_out;
-		tap_list[1] = tap0_coef_bin;
-
-		tap_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x0f, 7, 7);
-		pr_info("tap0 manual = %u",tap_manual);
-	} else {
-		//##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 0 0 0 1]
-		rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, tap_id);
-		mdelay(1);
-		//##Tap1 Even Read Out
-		tap_sign_out_even = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 5);
-		tap_coef_bin_even = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 0);
-
-		//##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 0 1 1 0]
-		rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, (tap_id + 5));
-		//##Tap1 Odd Read Out
-		tap_sign_out_odd = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 5);
-		tap_coef_bin_odd = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 0);
-
-		if (tap_sign_out_even == 1)
-			pr_info("Tap %u even sign: -", tap_id);
-		else
-			pr_info("Tap %u even sign: +", tap_id);
-
-		pr_info("Tap %u even coefficient = %u", tap_id, tap_coef_bin_even);
-
-		if (tap_sign_out_odd == 1)
-			pr_info("Tap %u odd sign: -", tap_id);
-		else
-			pr_info("Tap %u odd sign: +", tap_id);
-
-		pr_info("Tap %u odd coefficient = %u", tap_id,tap_coef_bin_odd);
-
-		tap_list[0] = tap_sign_out_even;
-		tap_list[1] = tap_coef_bin_even;
-		tap_list[2] = tap_sign_out_odd;
-		tap_list[3] = tap_coef_bin_odd;
-
-		tap_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7);
-		pr_info("tap %u manual = %d",tap_id, tap_manual);
-	}
-}
-
-void rtl9300_do_rx_calibration_1(int sds, phy_interface_t phy_mode)
-{
-	// From both rtl9300_rxCaliConf_serdes_myParam and rtl9300_rxCaliConf_phy_myParam
-	int tap0_init_val       = 0x1f; // Initial Decision Fed Equalizer 0 tap
-	int vth_min             = 0x0;
-
-	pr_info("start_1.1.1 initial value for sds %d\n", sds);
-	rtl930x_write_sds_phy(sds, 6,  0, 0);
-
-	// FGCAL
-	rtl9300_sds_field_w(sds, 0x2e, 0x01, 14, 14, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x1c, 10, 5, 0x20);
-	rtl9300_sds_field_w(sds, 0x2f, 0x02, 0, 0, 0x1);
-
-	// DCVS
-	rtl9300_sds_field_w(sds, 0x2e, 0x1e, 14, 11, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x01, 15, 15, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x02, 11, 11, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x1c, 4, 0, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x1d, 15, 11, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x1d, 10, 6, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x1d, 5, 1, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x02, 10, 6, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x11, 4, 0, 0x0);
-	rtl9300_sds_field_w(sds, 0x2f, 0x00, 3, 0, 0xf);
-	rtl9300_sds_field_w(sds, 0x2e, 0x04, 6, 6, 0x1);
-	rtl9300_sds_field_w(sds, 0x2e, 0x04, 7, 7, 0x1);
-
-	// LEQ (Long Term Equivalent signal level)
-	rtl9300_sds_field_w(sds, 0x2e, 0x16, 14, 8, 0x0);
-
-	// DFE (Decision Fed Equalizer)
-	rtl9300_sds_field_w(sds, 0x2f, 0x03, 5, 0, tap0_init_val);
-	rtl9300_sds_field_w(sds, 0x2e, 0x09, 11, 6, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x09, 5, 0, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x0a, 5, 0, 0x0);
-	rtl9300_sds_field_w(sds, 0x2f, 0x01, 5, 0, 0x0);
-	rtl9300_sds_field_w(sds, 0x2f, 0x12, 5, 0, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x0a, 11, 6, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x06, 5, 0, 0x0);
-	rtl9300_sds_field_w(sds, 0x2f, 0x01, 5, 0, 0x0);
-
-	// Vth
-	rtl9300_sds_field_w(sds, 0x2e, 0x13, 5, 3, 0x7);
-	rtl9300_sds_field_w(sds, 0x2e, 0x13, 2, 0, 0x7);
-	rtl9300_sds_field_w(sds, 0x2f, 0x0b, 5, 3, vth_min);
-
-	pr_info("end_1.1.1 --\n");
-
-	pr_info("start_1.1.2 Load DFE init. value\n");
-
-	rtl9300_sds_field_w(sds, 0x2e, 0x0f, 13, 7, 0x7f);
-
-	pr_info("end_1.1.2\n");
-
-	pr_info("start_1.1.3 disable LEQ training,enable DFE clock\n");
-
-	rtl9300_sds_field_w(sds, 0x2e, 0x17, 7, 7, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x17, 6, 2, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x0c, 8, 8, 0x0);
-	rtl9300_sds_field_w(sds, 0x2e, 0x0b, 4, 4, 0x1);
-	rtl9300_sds_field_w(sds, 0x2e, 0x12, 14, 14, 0x0);
-	rtl9300_sds_field_w(sds, 0x2f, 0x02, 15, 15, 0x0);
-
-	pr_info("end_1.1.3 --\n");
-
-	pr_info("start_1.1.4 offset cali setting\n");
-
-	rtl9300_sds_field_w(sds, 0x2e, 0x0f, 15, 14, 0x3);
-
-	pr_info("end_1.1.4\n");
-
-	pr_info("start_1.1.5 LEQ and DFE setting\n");
-
-	// TODO: make this work for DAC cables of different lengths
-	// For a 10GBit serdes wit Fibre, SDS 8 or 9
-	if (phy_mode == PHY_INTERFACE_MODE_10GBASER || PHY_INTERFACE_MODE_1000BASEX)
-		rtl9300_sds_field_w(sds, 0x2e, 0x16, 3, 2, 0x2);
-	else
-		pr_err("%s not PHY-based or SerDes, implement DAC!\n", __func__);
-
-	// No serdes, check for Aquantia PHYs
-	rtl9300_sds_field_w(sds, 0x2e, 0x16, 3, 2, 0x2);
-
-	rtl9300_sds_field_w(sds, 0x2e, 0x0f, 6, 0, 0x5f);
-	rtl9300_sds_field_w(sds, 0x2f, 0x05, 7, 2, 0x1f);
-	rtl9300_sds_field_w(sds, 0x2e, 0x19, 9, 5, 0x1f);
-	rtl9300_sds_field_w(sds, 0x2f, 0x0b, 15, 9, 0x3c);
-	rtl9300_sds_field_w(sds, 0x2e, 0x0b, 1, 0, 0x3);
-
-	pr_info("end_1.1.5\n");
-}
-
-void rtl9300_do_rx_calibration_2_1(u32 sds_num)
-{
-	pr_info("start_1.2.1 ForegroundOffsetCal_Manual\n");
-
-	// Gray config endis to 1
-	rtl9300_sds_field_w(sds_num, 0x2f, 0x02, 2, 2, 0x1);
-
-	// ForegroundOffsetCal_Manual(auto mode)
-	rtl9300_sds_field_w(sds_num, 0x2e, 0x01, 14, 14, 0x0);
-
-	pr_info("end_1.2.1");
-}
-
-void rtl9300_do_rx_calibration_2_2(int sds_num)
-{
-	//Force Rx-Run = 0
-	rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 8, 8, 0x0);
-
-	rtl930x_sds_rx_rst(sds_num, PHY_INTERFACE_MODE_10GBASER);
-}
-
-void rtl9300_do_rx_calibration_2_3(int sds_num)
-{
-	u32 fgcal_binary, fgcal_gray;
-	u32 offset_range;
-
-	pr_info("start_1.2.3 Foreground Calibration\n");
-
-	while(1) {
-		if (!(sds_num % 2))
-			rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f);
-		else
-			rtl930x_write_sds_phy(sds_num -1 , 0x1f, 0x2, 0x31);
-
-		// ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1]
-		rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1);
-		// ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[1 0 x x x x]
-		rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x20);
-		// ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 1 1 1 1]
-		rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0xf);
-		// ##FGCAL read gray
-		fgcal_gray = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 0);
-		// ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 1 1 1 0]
-		rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0xe);
-		// ##FGCAL read binary
-		fgcal_binary = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 0);
-
-		pr_info("%s: fgcal_gray: %d, fgcal_binary %d\n",
-			__func__, fgcal_gray, fgcal_binary);
-
-		offset_range = rtl9300_sds_field_r(sds_num, 0x2e, 0x15, 15, 14);
-
-		if (fgcal_binary > 60 || fgcal_binary < 3) {
-			if (offset_range == 3) {
-				pr_info("%s: Foreground Calibration result marginal!", __func__);
-				break;
-			} else {
-				offset_range++;
-				rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 15, 14, offset_range);
-				rtl9300_do_rx_calibration_2_2(sds_num);
-			}
-		} else {
-			break;
-		}
-	}
-	pr_info("%s: end_1.2.3\n", __func__);
-}
-
-void rtl9300_do_rx_calibration_2(int sds)
-{
-	rtl930x_sds_rx_rst(sds, PHY_INTERFACE_MODE_10GBASER);
-	rtl9300_do_rx_calibration_2_1(sds);
-	rtl9300_do_rx_calibration_2_2(sds);
-	rtl9300_do_rx_calibration_2_3(sds);
-}
-
-void rtl9300_sds_rxcal_3_1(int sds_num, phy_interface_t phy_mode)
-{
-	pr_info("start_1.3.1");
-
-	// ##1.3.1
-	if (phy_mode != PHY_INTERFACE_MODE_10GBASER && phy_mode != PHY_INTERFACE_MODE_1000BASEX)
-		rtl9300_sds_field_w(sds_num, 0x2e, 0xc, 8, 8, 0);
-
-	rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 7, 7, 0x0);
-	rtl9300_sds_rxcal_leq_manual(sds_num, false, 0);
-
-	pr_info("end_1.3.1");
-}
-
-void rtl9300_sds_rxcal_3_2(int sds_num, phy_interface_t phy_mode)
-{
-	u32 sum10 = 0, avg10, int10;
-	int dac_long_cable_offset;
-	bool eq_hold_enabled;
-	int i;
-
-	if (phy_mode == PHY_INTERFACE_MODE_10GBASER || phy_mode == PHY_INTERFACE_MODE_1000BASEX) {
-		// rtl9300_rxCaliConf_serdes_myParam
-		dac_long_cable_offset = 3;
-		eq_hold_enabled = true;
-	} else {
-		// rtl9300_rxCaliConf_phy_myParam
-		dac_long_cable_offset = 0;
-		eq_hold_enabled = false;
-	}
-
-	if (phy_mode == PHY_INTERFACE_MODE_1000BASEX)
-		pr_warn("%s: LEQ only valid for 10GR!\n", __func__);
-
-	pr_info("start_1.3.2");
-
-	for(i = 0; i < 10; i++) {
-		sum10 += rtl9300_sds_rxcal_leq_read(sds_num);
-		mdelay(10);
-	}
-
-	avg10 = (sum10 / 10) + (((sum10 % 10) >= 5) ? 1 : 0);
-	int10 = sum10 / 10;
-
-	pr_info("sum10:%u, avg10:%u, int10:%u", sum10, avg10, int10);
-
-	if (phy_mode == PHY_INTERFACE_MODE_10GBASER || phy_mode == PHY_INTERFACE_MODE_1000BASEX) {
-		if (dac_long_cable_offset) {
-			rtl9300_sds_rxcal_leq_offset_manual(sds_num, 1, dac_long_cable_offset);
-			rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 7, 7, eq_hold_enabled);
-			if (phy_mode == PHY_INTERFACE_MODE_10GBASER)
-				rtl9300_sds_rxcal_leq_manual(sds_num, true, avg10);
-		} else {
-			if (sum10 >= 5) {
-				rtl9300_sds_rxcal_leq_offset_manual(sds_num, 1, 3);
-				rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 7, 7, 0x1);
-				if (phy_mode == PHY_INTERFACE_MODE_10GBASER)
-					rtl9300_sds_rxcal_leq_manual(sds_num, true, avg10);
-			} else {
-				rtl9300_sds_rxcal_leq_offset_manual(sds_num, 1, 0);
-				rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 7, 7, 0x1);
-				if (phy_mode == PHY_INTERFACE_MODE_10GBASER)
-					rtl9300_sds_rxcal_leq_manual(sds_num, true, avg10);
-			}
-		}
-	}
-
-	pr_info("Sds:%u LEQ = %u",sds_num, rtl9300_sds_rxcal_leq_read(sds_num));
-
-	pr_info("end_1.3.2");
-}
-
-void rtl9300_do_rx_calibration_3(int sds_num, phy_interface_t phy_mode)
-{
-	rtl9300_sds_rxcal_3_1(sds_num, phy_mode);
-
-	if (phy_mode == PHY_INTERFACE_MODE_10GBASER || phy_mode == PHY_INTERFACE_MODE_1000BASEX)
-		rtl9300_sds_rxcal_3_2(sds_num, phy_mode);
-}
-
-void rtl9300_do_rx_calibration_4_1(int sds_num)
-{
-	u32 vth_list[2] = {0, 0};
-	u32 tap0_list[4] = {0, 0, 0, 0};
-
-	pr_info("start_1.4.1");
-
-	// ##1.4.1
-	rtl9300_sds_rxcal_vth_manual(sds_num, false, vth_list);
-	rtl9300_sds_rxcal_tap_manual(sds_num, 0, false, tap0_list);
-	mdelay(200);
-
-	pr_info("end_1.4.1");
-}
-
-void rtl9300_do_rx_calibration_4_2(u32 sds_num)
-{
-	u32 vth_list[2];
-	u32 tap_list[4];
-
-	pr_info("start_1.4.2");
-
-	rtl9300_sds_rxcal_vth_get(sds_num, vth_list);
-	rtl9300_sds_rxcal_vth_manual(sds_num, true, vth_list);
-
-	mdelay(100);
-
-	rtl9300_sds_rxcal_tap_get(sds_num, 0, tap_list);
-	rtl9300_sds_rxcal_tap_manual(sds_num, 0, true, tap_list);
-
-	pr_info("end_1.4.2");
-}
-
-void rtl9300_do_rx_calibration_4(u32 sds_num)
-{
-	rtl9300_do_rx_calibration_4_1(sds_num);
-	rtl9300_do_rx_calibration_4_2(sds_num);
-}
-
-void rtl9300_do_rx_calibration_5_2(u32 sds_num)
-{
-	u32 tap1_list[4] = {0};
-	u32 tap2_list[4] = {0};
-	u32 tap3_list[4] = {0};
-	u32 tap4_list[4] = {0};
-
-	pr_info("start_1.5.2");
-
-	rtl9300_sds_rxcal_tap_manual(sds_num, 1, false, tap1_list);
-	rtl9300_sds_rxcal_tap_manual(sds_num, 2, false, tap2_list);
-	rtl9300_sds_rxcal_tap_manual(sds_num, 3, false, tap3_list);
-	rtl9300_sds_rxcal_tap_manual(sds_num, 4, false, tap4_list);
-
-	mdelay(30);
-
-	pr_info("end_1.5.2");
-}
-
-void rtl9300_do_rx_calibration_5(u32 sds_num, phy_interface_t phy_mode)
-{
-	if (phy_mode == PHY_INTERFACE_MODE_10GBASER) // dfeTap1_4Enable true
-		rtl9300_do_rx_calibration_5_2(sds_num);
-}
-
-
-void rtl9300_do_rx_calibration_dfe_disable(u32 sds_num)
-{
-	u32 tap1_list[4] = {0};
-	u32 tap2_list[4] = {0};
-	u32 tap3_list[4] = {0};
-	u32 tap4_list[4] = {0};
-
-	rtl9300_sds_rxcal_tap_manual(sds_num, 1, true, tap1_list);
-	rtl9300_sds_rxcal_tap_manual(sds_num, 2, true, tap2_list);
-	rtl9300_sds_rxcal_tap_manual(sds_num, 3, true, tap3_list);
-	rtl9300_sds_rxcal_tap_manual(sds_num, 4, true, tap4_list);
-
-	mdelay(10);
-}
-
-void rtl9300_do_rx_calibration(int sds, phy_interface_t phy_mode)
-{
-	u32 latch_sts;
-
-	rtl9300_do_rx_calibration_1(sds, phy_mode);
-	rtl9300_do_rx_calibration_2(sds);
-	rtl9300_do_rx_calibration_4(sds);
-	rtl9300_do_rx_calibration_5(sds, phy_mode);
-	mdelay(20);
-
-	// Do this only for 10GR mode, SDS active in mode 0x1a
-	if (rtl9300_sds_field_r(sds, 0x1f, 9, 11, 7) == 0x1a) {
-		pr_info("%s: SDS enabled\n", __func__);
-		latch_sts = rtl9300_sds_field_r(sds, 0x4, 1, 2, 2);
-		mdelay(1);
-		latch_sts = rtl9300_sds_field_r(sds, 0x4, 1, 2, 2);
-		if (latch_sts) {
-			rtl9300_do_rx_calibration_dfe_disable(sds);
-			rtl9300_do_rx_calibration_4(sds);
-			rtl9300_do_rx_calibration_5(sds, phy_mode);
-		}
-	}
-}
-
-int rtl9300_sds_sym_err_reset(int sds_num, phy_interface_t phy_mode)
-{
-	switch (phy_mode) {
-	case PHY_INTERFACE_MODE_XGMII:
-		break;
-
-	case PHY_INTERFACE_MODE_10GBASER:
-		// Read twice to clear
-		rtl930x_read_sds_phy(sds_num, 5, 1);
-		rtl930x_read_sds_phy(sds_num, 5, 1);
-		break;
-
-	case PHY_INTERFACE_MODE_1000BASEX:
-		rtl9300_sds_field_w(sds_num, 0x1, 24, 2, 0, 0);
-		rtl9300_sds_field_w(sds_num, 0x1, 3, 15, 8, 0);
-		rtl9300_sds_field_w(sds_num, 0x1, 2, 15, 0, 0);
-		break;
-
-	default:
-		pr_info("%s unsupported phy mode\n", __func__);
-		return -1;
-	}
-
-	return 0;
-}
-
-u32 rtl9300_sds_sym_err_get(int sds_num, phy_interface_t phy_mode)
-{
-	u32 v = 0;
-
-	switch (phy_mode) {
-	case PHY_INTERFACE_MODE_XGMII:
-		break;
-
-	case PHY_INTERFACE_MODE_10GBASER:
-		v = rtl930x_read_sds_phy(sds_num, 5, 1);
-		return v & 0xff;
-
-	default:
-		pr_info("%s unsupported PHY-mode\n", __func__);
-	}
-
-	return v;
-}
-
-int rtl9300_sds_check_calibration(int sds_num, phy_interface_t phy_mode)
-{
-	u32 errors1, errors2;
-
-	rtl9300_sds_sym_err_reset(sds_num, phy_mode);
-	rtl9300_sds_sym_err_reset(sds_num, phy_mode);
-
-	// Count errors during 1ms
-	errors1 = rtl9300_sds_sym_err_get(sds_num, phy_mode);
-	mdelay(1);
-	errors2 = rtl9300_sds_sym_err_get(sds_num, phy_mode);
-
-	switch (phy_mode) {
-		case PHY_INTERFACE_MODE_XGMII:
-
-			if ((errors2 - errors1 > 100)
-			    || (errors1 >= 0xffff00) || (errors2 >= 0xffff00)) {
-				pr_info("%s XSGMII error rate too high\n", __func__);
-				return 1;
-			}
-			break;
-		case PHY_INTERFACE_MODE_10GBASER:
-			if (errors2 > 0) {
-				pr_info("%s 10GBASER error rate too high\n", __func__);
-				return 1;
-			}
-			break;
-		default:
-			return 1;
-	}
-	return 0;
-}
-
-void rtl9300_phy_enable_10g_1g(int sds_num)
-{
-	u32 v;
-
-	// Enable 1GBit PHY
-	v = rtl930x_read_sds_phy(sds_num, PHY_PAGE_2, PHY_CTRL_REG);
-	pr_info("%s 1gbit phy: %08x\n", __func__, v);
-	v &= ~BIT(PHY_POWER_BIT);
-	rtl930x_write_sds_phy(sds_num, PHY_PAGE_2, PHY_CTRL_REG, v);
-	pr_info("%s 1gbit phy enabled: %08x\n", __func__, v);
-
-	// Enable 10GBit PHY
-	v = rtl930x_read_sds_phy(sds_num, PHY_PAGE_4, PHY_CTRL_REG);
-	pr_info("%s 10gbit phy: %08x\n", __func__, v);
-	v &= ~BIT(PHY_POWER_BIT);
-	rtl930x_write_sds_phy(sds_num, PHY_PAGE_4, PHY_CTRL_REG, v);
-	pr_info("%s 10gbit phy after: %08x\n", __func__, v);
-
-	// dal_longan_construct_mac_default_10gmedia_fiber
-	v = rtl930x_read_sds_phy(sds_num, 0x1f, 11);
-	pr_info("%s set medium: %08x\n", __func__, v);
-	v |= BIT(1);
-	rtl930x_write_sds_phy(sds_num, 0x1f, 11, v);
-	pr_info("%s set medium after: %08x\n", __func__, v);
-}
-
-#define RTL930X_MAC_FORCE_MODE_CTRL		(0xCA1C)
-// phy_mode = PHY_INTERFACE_MODE_10GBASER, sds_mode = 0x1a
-int rtl9300_serdes_setup(int sds_num, phy_interface_t phy_mode)
-{
-	int sds_mode;
-	int calib_tries = 0;
-
-	switch (phy_mode) {
-	case PHY_INTERFACE_MODE_HSGMII:
-		sds_mode = 0x12;
-		break;
-	case PHY_INTERFACE_MODE_1000BASEX:
-		sds_mode = 0x04;
-		break;
-	case PHY_INTERFACE_MODE_XGMII:
-		sds_mode = 0x10;
-		break;
-	case PHY_INTERFACE_MODE_10GBASER:
-		sds_mode = 0x1a;
-		break;
-	case PHY_INTERFACE_MODE_USXGMII:
-		sds_mode = 0x0d;
-		break;
-	default:
-		pr_err("%s: unknown serdes mode: %s\n", __func__, phy_modes(phy_mode));
-		return -EINVAL;
-	}
-
-	// Maybe use dal_longan_sds_init
-
-	// dal_longan_construct_serdesConfig_init		// Serdes Construct
-	rtl9300_phy_enable_10g_1g(sds_num);
-
-	// Set Serdes Mode
-	rtl9300_sds_set(sds_num, 0x1a);	 // 0x1b: RTK_MII_10GR1000BX_AUTO
-
-	// Do RX calibration
-	do {
-		rtl9300_do_rx_calibration(sds_num, phy_mode);
-		calib_tries++;
-		mdelay(50);
-	} while (rtl9300_sds_check_calibration(sds_num, phy_mode) && calib_tries < 3);
-
-
-	return 0;
-}
-
-typedef struct {
-	u8 page;
-	u8 reg;
-	u16 data;
-} sds_config;
-
-sds_config rtl9300_a_sds_10gr_lane0[] =
-{
-	/*1G*/
-	{0x00, 0x0E, 0x3053}, {0x01, 0x14, 0x0100}, {0x21, 0x03, 0x8206},
-	{0x21, 0x05, 0x40B0}, {0x21, 0x06, 0x0010}, {0x21, 0x07, 0xF09F},
-	{0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, {0x21, 0x0E, 0x0000},
-	{0x21, 0x0F, 0x0008}, {0x24, 0x00, 0x0668}, {0x24, 0x02, 0xD020},
-	{0x24, 0x06, 0xC000}, {0x24, 0x0B, 0x1892}, {0x24, 0x0F, 0xFFDF},
-	{0x24, 0x12, 0x03C4}, {0x24, 0x13, 0x027F}, {0x24, 0x14, 0x1311},
-	{0x24, 0x16, 0x00C9}, {0x24, 0x17, 0xA100}, {0x24, 0x1A, 0x0001},
-	{0x24, 0x1C, 0x0400}, {0x25, 0x01, 0x0300}, {0x25, 0x02, 0x1017},
-	{0x25, 0x03, 0xFFDF}, {0x25, 0x05, 0x7F7C}, {0x25, 0x07, 0x8100},
-	{0x25, 0x08, 0x0001}, {0x25, 0x09, 0xFFD4}, {0x25, 0x0A, 0x7C2F},
-	{0x25, 0x0E, 0x003F}, {0x25, 0x0F, 0x0121}, {0x25, 0x10, 0x0020},
-	{0x25, 0x11, 0x8840}, {0x2B, 0x13, 0x0050}, {0x2B, 0x18, 0x8E88},
-	{0x2B, 0x19, 0x4902}, {0x2B, 0x1D, 0x2501}, {0x2D, 0x13, 0x0050},
-	{0x2D, 0x18, 0x8E88}, {0x2D, 0x19, 0x4902}, {0x2D, 0x1D, 0x2641},
-	{0x2F, 0x13, 0x0050}, {0x2F, 0x18, 0x8E88}, {0x2F, 0x19, 0x4902},
-	{0x2F, 0x1D, 0x66E1},
-	/*3.125G*/
-	{0x28, 0x00, 0x0668}, {0x28, 0x02, 0xD020}, {0x28, 0x06, 0xC000},
-	{0x28, 0x0B, 0x1892}, {0x28, 0x0F, 0xFFDF}, {0x28, 0x12, 0x01C4},
-	{0x28, 0x13, 0x027F}, {0x28, 0x14, 0x1311}, {0x28, 0x16, 0x00C9},
-	{0x28, 0x17, 0xA100}, {0x28, 0x1A, 0x0001}, {0x28, 0x1C, 0x0400},
-	{0x29, 0x01, 0x0300}, {0x29, 0x02, 0x1017}, {0x29, 0x03, 0xFFDF},
-	{0x29, 0x05, 0x7F7C}, {0x29, 0x07, 0x8100}, {0x29, 0x08, 0x0001},
-	{0x29, 0x09, 0xFFD4}, {0x29, 0x0A, 0x7C2F}, {0x29, 0x0E, 0x003F},
-	{0x29, 0x0F, 0x0121}, {0x29, 0x10, 0x0020}, {0x29, 0x11, 0x8840},
-	/*10G*/
-	{0x06, 0x0D, 0x0F00}, {0x06, 0x00, 0x0000}, {0x06, 0x01, 0xC800},
-	{0x21, 0x03, 0x8206}, {0x21, 0x05, 0x40B0}, {0x21, 0x06, 0x0010},
-	{0x21, 0x07, 0xF09F}, {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009},
-	{0x21, 0x0E, 0x0000}, {0x21, 0x0F, 0x0008}, {0x2E, 0x00, 0xA668},
-	{0x2E, 0x02, 0xD020}, {0x2E, 0x06, 0xC000}, {0x2E, 0x0B, 0x1892},
-	{0x2E, 0x0F, 0xFFDF}, {0x2E, 0x11, 0x8280}, {0x2E, 0x12, 0x0044},
-	{0x2E, 0x13, 0x027F}, {0x2E, 0x14, 0x1311}, {0x2E, 0x17, 0xA100},
-	{0x2E, 0x1A, 0x0001}, {0x2E, 0x1C, 0x0400}, {0x2F, 0x01, 0x0300},
-	{0x2F, 0x02, 0x1217}, {0x2F, 0x03, 0xFFDF}, {0x2F, 0x05, 0x7F7C},
-	{0x2F, 0x07, 0x80C4}, {0x2F, 0x08, 0x0001}, {0x2F, 0x09, 0xFFD4},
-	{0x2F, 0x0A, 0x7C2F}, {0x2F, 0x0E, 0x003F}, {0x2F, 0x0F, 0x0121},
-	{0x2F, 0x10, 0x0020}, {0x2F, 0x11, 0x8840}, {0x2F, 0x14, 0xE008},
-	{0x2B, 0x13, 0x0050}, {0x2B, 0x18, 0x8E88}, {0x2B, 0x19, 0x4902},
-	{0x2B, 0x1D, 0x2501}, {0x2D, 0x13, 0x0050}, {0x2D, 0x17, 0x4109},
-	{0x2D, 0x18, 0x8E88}, {0x2D, 0x19, 0x4902}, {0x2D, 0x1C, 0x1109},
-	{0x2D, 0x1D, 0x2641}, {0x2F, 0x13, 0x0050}, {0x2F, 0x18, 0x8E88},
-	{0x2F, 0x19, 0x4902}, {0x2F, 0x1D, 0x76E1},
-};
-
-sds_config rtl9300_a_sds_10gr_lane1[] =
-{
-	/*1G*/
-	{0x00, 0x0E, 0x3053}, {0x01, 0x14, 0x0100}, {0x21, 0x03, 0x8206},
-	{0x21, 0x06, 0x0010}, {0x21, 0x07, 0xF09F}, {0x21, 0x0A, 0x0003},
-	{0x21, 0x0B, 0x0005}, {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009},
-	{0x21, 0x0E, 0x0000}, {0x21, 0x0F, 0x0008}, {0x24, 0x00, 0x0668},
-	{0x24, 0x02, 0xD020}, {0x24, 0x06, 0xC000}, {0x24, 0x0B, 0x1892},
-	{0x24, 0x0F, 0xFFDF}, {0x24, 0x12, 0x03C4}, {0x24, 0x13, 0x027F},
-	{0x24, 0x14, 0x1311}, {0x24, 0x16, 0x00C9}, {0x24, 0x17, 0xA100},
-	{0x24, 0x1A, 0x0001}, {0x24, 0x1C, 0x0400}, {0x25, 0x00, 0x820F},
-	{0x25, 0x01, 0x0300}, {0x25, 0x02, 0x1017}, {0x25, 0x03, 0xFFDF},
-	{0x25, 0x05, 0x7F7C}, {0x25, 0x07, 0x8100}, {0x25, 0x08, 0x0001},
-	{0x25, 0x09, 0xFFD4}, {0x25, 0x0A, 0x7C2F}, {0x25, 0x0E, 0x003F},
-	{0x25, 0x0F, 0x0121}, {0x25, 0x10, 0x0020}, {0x25, 0x11, 0x8840},
-	{0x2B, 0x13, 0x3D87}, {0x2B, 0x14, 0x3108}, {0x2D, 0x13, 0x3C87},
-	{0x2D, 0x14, 0x1808},
-	/*3.125G*/
-	{0x28, 0x00, 0x0668}, {0x28, 0x02, 0xD020}, {0x28, 0x06, 0xC000},
-	{0x28, 0x0B, 0x1892}, {0x28, 0x0F, 0xFFDF}, {0x28, 0x12, 0x01C4},
-	{0x28, 0x13, 0x027F}, {0x28, 0x14, 0x1311}, {0x28, 0x16, 0x00C9},
-	{0x28, 0x17, 0xA100}, {0x28, 0x1A, 0x0001}, {0x28, 0x1C, 0x0400},
-	{0x29, 0x00, 0x820F}, {0x29, 0x01, 0x0300}, {0x29, 0x02, 0x1017},
-	{0x29, 0x03, 0xFFDF}, {0x29, 0x05, 0x7F7C}, {0x29, 0x07, 0x8100},
-	{0x29, 0x08, 0x0001}, {0x29, 0x0A, 0x7C2F}, {0x29, 0x0E, 0x003F},
-	{0x29, 0x0F, 0x0121}, {0x29, 0x10, 0x0020}, {0x29, 0x11, 0x8840},
-	/*10G*/
-	{0x06, 0x0D, 0x0F00}, {0x06, 0x00, 0x0000}, {0x06, 0x01, 0xC800},
-	{0x21, 0x03, 0x8206}, {0x21, 0x05, 0x40B0}, {0x21, 0x06, 0x0010},
-	{0x21, 0x07, 0xF09F}, {0x21, 0x0A, 0x0003}, {0x21, 0x0B, 0x0005},
-	{0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, {0x21, 0x0E, 0x0000},
-	{0x21, 0x0F, 0x0008}, {0x2E, 0x00, 0xA668}, {0x2E, 0x02, 0xD020},
-	{0x2E, 0x06, 0xC000}, {0x2E, 0x0B, 0x1892}, {0x2E, 0x0F, 0xFFDF},
-	{0x2E, 0x11, 0x8280}, {0x2E, 0x12, 0x0044}, {0x2E, 0x13, 0x027F},
-	{0x2E, 0x14, 0x1311}, {0x2E, 0x17, 0xA100}, {0x2E, 0x1A, 0x0001},
-	{0x2E, 0x1C, 0x0400}, {0x2F, 0x00, 0x820F}, {0x2F, 0x01, 0x0300},
-	{0x2F, 0x02, 0x1217}, {0x2F, 0x03, 0xFFDF}, {0x2F, 0x05, 0x7F7C},
-	{0x2F, 0x07, 0x80C4}, {0x2F, 0x08, 0x0001}, {0x2F, 0x09, 0xFFD4},
-	{0x2F, 0x0A, 0x7C2F}, {0x2F, 0x0E, 0x003F}, {0x2F, 0x0F, 0x0121},
-	{0x2F, 0x10, 0x0020}, {0x2F, 0x11, 0x8840}, {0x2B, 0x13, 0x3D87},
-	{0x2B, 0x14, 0x3108}, {0x2D, 0x13, 0x3C87}, {0x2D, 0x14, 0x1808},
-};
-
-int rtl9300_sds_cmu_band_get(int sds)
-{
-	u32 page;
-	u32 en;
-	u32 cmu_band;
-
-//	page = rtl9300_sds_cmu_page_get(sds);
-	page = 0x25; // 10GR and 1000BX
-	sds = (sds % 2) ? (sds - 1) : (sds);
-
-	rtl9300_sds_field_w(sds, page, 0x1c, 15, 15, 1);
-	rtl9300_sds_field_w(sds + 1, page, 0x1c, 15, 15, 1);
-
-	en = rtl9300_sds_field_r(sds, page, 27, 1, 1);
-	if(!en) { // Auto mode
-		rtl930x_write_sds_phy(sds, 0x1f, 0x02, 31);
-
-		cmu_band = rtl9300_sds_field_r(sds, 0x1f, 0x15, 5, 1);
-	} else {
-		cmu_band = rtl9300_sds_field_r(sds, page, 30, 4, 0);
-	}
-
-	return cmu_band;
-}
-
-int rtl9300_configure_serdes(struct phy_device *phydev)
-{
-	struct device *dev = &phydev->mdio.dev;
-	int phy_addr = phydev->mdio.addr;
-	struct device_node *dn;
-	u32 sds_num = 0;
-	int sds_mode, calib_tries = 0, phy_mode = PHY_INTERFACE_MODE_10GBASER, i;
-
-	if (dev->of_node) {
-		dn = dev->of_node;
-		
-		if (of_property_read_u32(dn, "sds", &sds_num))
-			sds_num = -1;
-		pr_info("%s: Port %d, SerDes is %d\n", __func__, phy_addr, sds_num);
-	} else {
-		dev_err(dev, "No DT node.\n");
-		return -EINVAL;
-	}
-
-	if (sds_num < 0)
-		return 0;
-
-	if (phy_mode != PHY_INTERFACE_MODE_10GBASER) // TODO: for now we only patch 10GR SerDes
-		return 0;
-
-	switch (phy_mode) {
-	case PHY_INTERFACE_MODE_HSGMII:
-		sds_mode = 0x12;
-		break;
-	case PHY_INTERFACE_MODE_1000BASEX:
-		sds_mode = 0x04;
-		break;
-	case PHY_INTERFACE_MODE_XGMII:
-		sds_mode = 0x10;
-		break;
-	case PHY_INTERFACE_MODE_10GBASER:
-		sds_mode = 0x1a;
-		break;
-	case PHY_INTERFACE_MODE_USXGMII:
-		sds_mode = 0x0d;
-		break;
-	default:
-		pr_err("%s: unknown serdes mode: %s\n", __func__, phy_modes(phy_mode));
-		return -EINVAL;
-	}
-
-	pr_info("%s CMU BAND is %d\n", __func__, rtl9300_sds_cmu_band_get(sds_num));
-
-	// Turn Off Serdes
-	rtl9300_sds_rst(sds_num, 0x1f);
-
-	pr_info("%s PATCHING SerDes %d\n", __func__, sds_num);
-	if (sds_num % 2) {
-		for (i = 0; i < sizeof(rtl9300_a_sds_10gr_lane1) / sizeof(sds_config); ++i) {
-			rtl930x_write_sds_phy(sds_num, rtl9300_a_sds_10gr_lane1[i].page,
-						rtl9300_a_sds_10gr_lane1[i].reg,
-						rtl9300_a_sds_10gr_lane1[i].data);
-		}
-	} else {
-		for (i = 0; i < sizeof(rtl9300_a_sds_10gr_lane0) / sizeof(sds_config); ++i) {
-			rtl930x_write_sds_phy(sds_num, rtl9300_a_sds_10gr_lane0[i].page,
-						rtl9300_a_sds_10gr_lane0[i].reg,
-						rtl9300_a_sds_10gr_lane0[i].data);
-		}
-	}
-
-	rtl9300_phy_enable_10g_1g(sds_num);
-
-	// Disable MAC
-	sw_w32_mask(0, 1, RTL930X_MAC_FORCE_MODE_CTRL);
-	mdelay(20);
-
-	// ----> dal_longan_sds_mode_set
-	pr_info("%s: Configuring RTL9300 SERDES %d, mode %02x\n", __func__, sds_num, sds_mode);
-
-	// Configure link to MAC
-	rtl9300_serdes_mac_link_config(sds_num, true, true);	// MAC Construct
-
-	// Disable MAC
-	sw_w32_mask(0, 1, RTL930X_MAC_FORCE_MODE_CTRL);
-	mdelay(20);
-
-	rtl9300_force_sds_mode(sds_num, PHY_INTERFACE_MODE_NA);
-
-	// Re-Enable MAC
-	sw_w32_mask(1, 0, RTL930X_MAC_FORCE_MODE_CTRL);
-
-	rtl9300_force_sds_mode(sds_num, phy_mode);
-
-	// Do RX calibration
-	do {
-		rtl9300_do_rx_calibration(sds_num, phy_mode);
-		calib_tries++;
-		mdelay(50);
-	} while (rtl9300_sds_check_calibration(sds_num, phy_mode) && calib_tries < 3);
-
-	if (calib_tries >= 3)
-		pr_err("%s CALIBTRATION FAILED\n", __func__);
-
-	rtl9300_sds_tx_config(sds_num, phy_mode);
-
-	// The clock needs only to be configured on the FPGA implementation
-
-	return 0;
-}
-
-void rtl9310_sds_field_w(int sds, u32 page, u32 reg, int end_bit, int start_bit, u32 v)
-{
-	int l = end_bit - start_bit + 1;
-	u32 data = v;
-
-	if (l < 32) {
-		u32 mask = BIT(l) - 1;
-
-		data = rtl930x_read_sds_phy(sds, page, reg);
-		data &= ~(mask << start_bit);
-		data |= (v & mask) << start_bit;
-	}
-
-	rtl931x_write_sds_phy(sds, page, reg, data);
-}
-
-
-u32 rtl9310_sds_field_r(int sds, u32 page, u32 reg, int end_bit, int start_bit)
-{
-	int l = end_bit - start_bit + 1;
-	u32 v = rtl931x_read_sds_phy(sds, page, reg);
-
-	if (l >= 32)
-		return v;
-
-	return (v >> start_bit) & (BIT(l) - 1);
-}
-
-static void rtl931x_sds_rst(u32 sds)
-{
-	u32 o, v, o_mode;
-	int shift = ((sds & 0x3) << 3);
-
-	// TODO: We need to lock this!
-	
-	o = sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR);
-	v = o | BIT(sds);
-	sw_w32(v, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR);
-
-	o_mode = sw_r32(RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2));
-	v = BIT(7) | 0x1F;
-	sw_w32_mask(0xff << shift, v << shift, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2));
-	sw_w32(o_mode, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2));
-
-	sw_w32(o, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR);
-}
-
-static void rtl931x_symerr_clear(u32 sds, phy_interface_t mode)
-{
-	u32 i;
-	u32 xsg_sdsid_0, xsg_sdsid_1;
-
-	switch (mode) {
-	case PHY_INTERFACE_MODE_NA:
-		break;
-	case PHY_INTERFACE_MODE_XGMII:
-		if (sds < 2)
-			xsg_sdsid_0 = sds;
-		else
-			xsg_sdsid_0 = (sds - 1) * 2;
-		xsg_sdsid_1 = xsg_sdsid_0 + 1;
-
-		for (i = 0; i < 4; ++i) {
-			rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 24, 2, 0, i);
-			rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 3, 15, 8, 0x0);
-			rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 2, 15, 0, 0x0);
-		}
-
-		for (i = 0; i < 4; ++i) {
-			rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 24, 2, 0, i);
-			rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 3, 15, 8, 0x0);
-			rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 2, 15, 0, 0x0);
-		}
-
-		rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 0, 15, 0, 0x0);
-		rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 1, 15, 8, 0x0);
-		rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 0, 15, 0, 0x0);
-		rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 1, 15, 8, 0x0);
-		break;
-	default:
-		break;
-	}
-
-	return;
-}
-
-static u32 rtl931x_get_analog_sds(u32 sds)
-{
-	u32 sds_map[] = { 0, 1, 2, 3, 6, 7, 10, 11, 14, 15, 18, 19, 22, 23 };
-
-	if (sds < 14)
-		return sds_map[sds];
-	return sds;
-}
-
-void rtl931x_sds_fiber_disable(u32 sds)
-{
-	u32 v = 0x3F;
-	u32 asds = rtl931x_get_analog_sds(sds);
-
-	rtl9310_sds_field_w(asds, 0x1F, 0x9, 11, 6, v);
-}
-
-static void rtl931x_sds_fiber_mode_set(u32 sds, phy_interface_t mode)
-{
-	u32 val, asds = rtl931x_get_analog_sds(sds);
-
-	/* clear symbol error count before changing mode */
-	rtl931x_symerr_clear(sds, mode);
-
-	val = 0x9F;
-	sw_w32(val, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2));
-
-	switch (mode) {
-	case PHY_INTERFACE_MODE_SGMII:
-		val = 0x5;
-		break;
-
-	case PHY_INTERFACE_MODE_1000BASEX:
-		/* serdes mode FIBER1G */
-		val = 0x9;
-		break;
-
-	case PHY_INTERFACE_MODE_10GBASER:
-	case PHY_INTERFACE_MODE_10GKR:
-		val = 0x35;
-		break;
-/*	case MII_10GR1000BX_AUTO:
-		val = 0x39;
-		break; */
-
-
-	case PHY_INTERFACE_MODE_USXGMII:
-		val = 0x1B;
-		break;
-	default:
-		val = 0x25;
-	}
-
-	pr_info("%s writing analog SerDes Mode value %02x\n", __func__, val);
-	rtl9310_sds_field_w(asds, 0x1F, 0x9, 11, 6, val);
-
-	return;
-}
-
-static int rtl931x_sds_cmu_page_get(phy_interface_t mode)
-{
-	switch (mode) {
-	case PHY_INTERFACE_MODE_SGMII:
-	case PHY_INTERFACE_MODE_1000BASEX:	// MII_1000BX_FIBER / 100BX_FIBER / 1000BX100BX_AUTO
-		return 0x24;
-	case PHY_INTERFACE_MODE_HSGMII:
-	case PHY_INTERFACE_MODE_2500BASEX:	// MII_2500Base_X:
-		return 0x28;
-//	case MII_HISGMII_5G:
-//		return 0x2a;
-	case PHY_INTERFACE_MODE_QSGMII:
-		return 0x2a;			// Code also has 0x34
-	case PHY_INTERFACE_MODE_XAUI:		// MII_RXAUI_LITE:
-		return 0x2c;
-	case PHY_INTERFACE_MODE_XGMII:		// MII_XSGMII
-	case PHY_INTERFACE_MODE_10GKR:
-	case PHY_INTERFACE_MODE_10GBASER:	// MII_10GR
-		return 0x2e;
-	default:
-		return -1;
-	}
-	return -1;
-}
-
-static void rtl931x_cmu_type_set(u32 asds, phy_interface_t mode, int chiptype)
-{
-	int cmu_type = 0; // Clock Management Unit
-	u32 cmu_page = 0;
-	u32 frc_cmu_spd;
-	u32 evenSds;
-	u32 lane, frc_lc_mode_bitnum, frc_lc_mode_val_bitnum;
-
-	switch (mode) {
-	case PHY_INTERFACE_MODE_NA:
-	case PHY_INTERFACE_MODE_10GKR:
-	case PHY_INTERFACE_MODE_XGMII:
-	case PHY_INTERFACE_MODE_10GBASER:
-	case PHY_INTERFACE_MODE_USXGMII:
-		return;
-
-/*	case MII_10GR1000BX_AUTO:
-		if (chiptype)
-			rtl9310_sds_field_w(asds, 0x24, 0xd, 14, 14, 0);
-		return; */
-
-	case PHY_INTERFACE_MODE_QSGMII:
-		cmu_type = 1;
-		frc_cmu_spd = 0;
-		break;
-
-	case PHY_INTERFACE_MODE_HSGMII:
-		cmu_type = 1;
-		frc_cmu_spd = 1;
-		break;
-
-	case PHY_INTERFACE_MODE_1000BASEX:
-		cmu_type = 1;
-		frc_cmu_spd = 0;
-		break;
-
-/*	case MII_1000BX100BX_AUTO:
-		cmu_type = 1;
-		frc_cmu_spd = 0;
-		break; */
-
-	case PHY_INTERFACE_MODE_SGMII:
-		cmu_type = 1;
-		frc_cmu_spd = 0;
-		break;
-
-	case PHY_INTERFACE_MODE_2500BASEX:
-		cmu_type = 1;
-		frc_cmu_spd = 1;
-		break;
-
-	default:
-		pr_info("SerDes %d mode is invalid\n", asds);
-		return;
-	}
-
-	if (cmu_type == 1)
-		cmu_page = rtl931x_sds_cmu_page_get(mode);
-
-	lane = asds % 2;
-
-	if (!lane) {
-		frc_lc_mode_bitnum = 4;
-		frc_lc_mode_val_bitnum = 5;
-	} else {
-		frc_lc_mode_bitnum = 6;
-		frc_lc_mode_val_bitnum = 7;
-	}
-
-	evenSds = asds - lane;
-
-	pr_info("%s: cmu_type %0d cmu_page %x frc_cmu_spd %d lane %d asds %d\n",
-		__func__, cmu_type, cmu_page, frc_cmu_spd, lane, asds);
-
-	if (cmu_type == 1) {
-		pr_info("%s A CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7));
-		rtl9310_sds_field_w(asds, cmu_page, 0x7, 15, 15, 0);
-		pr_info("%s B CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7));
-		if (chiptype) {
-			rtl9310_sds_field_w(asds, cmu_page, 0xd, 14, 14, 0);
-		}
-
-		rtl9310_sds_field_w(evenSds, 0x20, 0x12, 3, 2, 0x3);
-		rtl9310_sds_field_w(evenSds, 0x20, 0x12, frc_lc_mode_bitnum, frc_lc_mode_bitnum, 1);
-		rtl9310_sds_field_w(evenSds, 0x20, 0x12, frc_lc_mode_val_bitnum, frc_lc_mode_val_bitnum, 0);
-		rtl9310_sds_field_w(evenSds, 0x20, 0x12, 12, 12, 1);
-		rtl9310_sds_field_w(evenSds, 0x20, 0x12, 15, 13, frc_cmu_spd);
-	}
-
-	pr_info("%s CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7));
-	return;
-}
-
-static void rtl931x_sds_rx_rst(u32 sds)
-{
-	u32 asds = rtl931x_get_analog_sds(sds);
-
-	if (sds < 2)
-		return;
-
-	rtl931x_write_sds_phy(asds, 0x2e, 0x12, 0x2740);
-	rtl931x_write_sds_phy(asds, 0x2f, 0x0, 0x0);
-	rtl931x_write_sds_phy(asds, 0x2f, 0x2, 0x2010);
-	rtl931x_write_sds_phy(asds, 0x20, 0x0, 0xc10);
-
-	rtl931x_write_sds_phy(asds, 0x2e, 0x12, 0x27c0);
-	rtl931x_write_sds_phy(asds, 0x2f, 0x0, 0xc000);
-	rtl931x_write_sds_phy(asds, 0x2f, 0x2, 0x6010);
-	rtl931x_write_sds_phy(asds, 0x20, 0x0, 0xc30);
-
-	mdelay(50);
-}
-
-static void rtl931x_sds_disable(u32 sds)
-{
-	u32 v = 0x1f;
-
-	v |= BIT(7);
-	sw_w32(v, RTL931X_SERDES_MODE_CTRL + (sds >> 2) * 4);
-}
-
-static void rtl931x_sds_mii_mode_set(u32 sds, phy_interface_t mode)
-{
-	u32 val;
-
-	switch (mode) {
-	case PHY_INTERFACE_MODE_QSGMII:
-		val = 0x6;
-		break;
-	case PHY_INTERFACE_MODE_XGMII:
-		val = 0x10; // serdes mode XSGMII
-		break;
-	case PHY_INTERFACE_MODE_USXGMII:
-	case PHY_INTERFACE_MODE_2500BASEX:
-		val = 0xD;
-		break;
-	case PHY_INTERFACE_MODE_HSGMII:
-		val = 0x12;
-		break;
-	case PHY_INTERFACE_MODE_SGMII:
-		val = 0x2;
-		break;
-	default:
-		return;
-	}
-
-	val |= (1 << 7);
-
-	sw_w32(val, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2));
-}
-
-static sds_config sds_config_10p3125g_type1[] = {
-	{ 0x2E, 0x00, 0x0107 }, { 0x2E, 0x01, 0x01A3 }, { 0x2E, 0x02, 0x6A24 },
-	{ 0x2E, 0x03, 0xD10D }, { 0x2E, 0x04, 0x8000 }, { 0x2E, 0x05, 0xA17E },
-	{ 0x2E, 0x06, 0xE31D }, { 0x2E, 0x07, 0x800E }, { 0x2E, 0x08, 0x0294 },
-	{ 0x2E, 0x09, 0x0CE4 }, { 0x2E, 0x0A, 0x7FC8 }, { 0x2E, 0x0B, 0xE0E7 },
-	{ 0x2E, 0x0C, 0x0200 }, { 0x2E, 0x0D, 0xDF80 }, { 0x2E, 0x0E, 0x0000 },
-	{ 0x2E, 0x0F, 0x1FC2 }, { 0x2E, 0x10, 0x0C3F }, { 0x2E, 0x11, 0x0000 },
-	{ 0x2E, 0x12, 0x27C0 }, { 0x2E, 0x13, 0x7E1D }, { 0x2E, 0x14, 0x1300 },
-	{ 0x2E, 0x15, 0x003F }, { 0x2E, 0x16, 0xBE7F }, { 0x2E, 0x17, 0x0090 },
-	{ 0x2E, 0x18, 0x0000 }, { 0x2E, 0x19, 0x4000 }, { 0x2E, 0x1A, 0x0000 },
-	{ 0x2E, 0x1B, 0x8000 }, { 0x2E, 0x1C, 0x011F }, { 0x2E, 0x1D, 0x0000 },
-	{ 0x2E, 0x1E, 0xC8FF }, { 0x2E, 0x1F, 0x0000 }, { 0x2F, 0x00, 0xC000 },
-	{ 0x2F, 0x01, 0xF000 }, { 0x2F, 0x02, 0x6010 }, { 0x2F, 0x12, 0x0EE7 },
-	{ 0x2F, 0x13, 0x0000 }
-};
-
-static sds_config sds_config_10p3125g_cmu_type1[] = {
-	{ 0x2F, 0x03, 0x4210 }, { 0x2F, 0x04, 0x0000 }, { 0x2F, 0x05, 0x0019 },
-	{ 0x2F, 0x06, 0x18A6 }, { 0x2F, 0x07, 0x2990 }, { 0x2F, 0x08, 0xFFF4 },
-	{ 0x2F, 0x09, 0x1F08 }, { 0x2F, 0x0A, 0x0000 }, { 0x2F, 0x0B, 0x8000 },
-	{ 0x2F, 0x0C, 0x4224 }, { 0x2F, 0x0D, 0x0000 }, { 0x2F, 0x0E, 0x0000 },
-	{ 0x2F, 0x0F, 0xA470 }, { 0x2F, 0x10, 0x8000 }, { 0x2F, 0x11, 0x037B }
-};
-
-void rtl931x_sds_init(u32 sds, phy_interface_t mode)
-{
-
-	u32 board_sds_tx_type1[] = { 0x1C3, 0x1C3, 0x1C3, 0x1A3, 0x1A3,
-		0x1A3, 0x143, 0x143, 0x143, 0x143, 0x163, 0x163
-	};
-
-	u32 board_sds_tx[] = { 0x1A00, 0x1A00, 0x200, 0x200, 0x200,
-		0x200, 0x1A3, 0x1A3, 0x1A3, 0x1A3, 0x1E3, 0x1E3
-	};
-
-	u32 board_sds_tx2[] = { 0xDC0, 0x1C0, 0x200, 0x180, 0x160,
-		0x123, 0x123, 0x163, 0x1A3, 0x1A0, 0x1C3, 0x9C3
-	};
-
-	u32 asds, dSds, ori, model_info, val;
-	int chiptype = 0;
-
-	asds = rtl931x_get_analog_sds(sds);
-
-	if (sds > 13)
-		return;
-
-	pr_info("%s: set sds %d to mode %d\n", __func__, sds, mode);
-	val = rtl9310_sds_field_r(asds, 0x1F, 0x9, 11, 6);
-
-	pr_info("%s: fibermode %08X stored mode 0x%x analog SDS %d", __func__,
-			rtl931x_read_sds_phy(asds, 0x1f, 0x9), val, asds);
-	pr_info("%s: SGMII mode %08X in 0x24 0x9 analog SDS %d", __func__,
-			rtl931x_read_sds_phy(asds, 0x24, 0x9), asds);
-	pr_info("%s: CMU mode %08X stored even SDS %d", __func__,
-			rtl931x_read_sds_phy(asds & ~1, 0x20, 0x12), asds & ~1);
-	pr_info("%s: serdes_mode_ctrl %08X", __func__,  RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2));
-	pr_info("%s CMU page 0x24 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x24, 0x7));
-	pr_info("%s CMU page 0x26 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x26, 0x7));
-	pr_info("%s CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7));
-	pr_info("%s XSG page 0x0 0xe %08x\n", __func__, rtl931x_read_sds_phy(dSds, 0x0, 0xe));
-	pr_info("%s XSG2 page 0x0 0xe %08x\n", __func__, rtl931x_read_sds_phy(dSds + 1, 0x0, 0xe));
-
-	model_info = sw_r32(RTL93XX_MODEL_NAME_INFO);
-	if ((model_info >> 4) & 0x1) {
-		pr_info("detected chiptype 1\n");
-		chiptype = 1;
-	} else {
-		pr_info("detected chiptype 0\n");
-	}
-
-	if (sds < 2)
-		dSds = sds;
-	else
-		dSds = (sds - 1) * 2;
-
-	pr_info("%s: 2.5gbit %08X dsds %d", __func__,
-		rtl931x_read_sds_phy(dSds, 0x1, 0x14), dSds);
-
-	pr_info("%s: RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR 0x%08X\n", __func__, sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR));
-	ori = sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR);
-	val = ori | (1 << sds);
-	sw_w32(val, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR);
-
-	switch (mode) {
-	case PHY_INTERFACE_MODE_NA:
-		break;
-
-	case PHY_INTERFACE_MODE_XGMII: // MII_XSGMII
-
-		if (chiptype) {
-			u32 xsg_sdsid_1;
-			xsg_sdsid_1 = dSds + 1;
-			//fifo inv clk
-			rtl9310_sds_field_w(dSds, 0x1, 0x1, 7, 4, 0xf);
-			rtl9310_sds_field_w(dSds, 0x1, 0x1, 3, 0, 0xf);
-
-			rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 0x1, 7, 4, 0xf);
-			rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 0x1, 3, 0, 0xf);
-
-		}
-
-		rtl9310_sds_field_w(dSds, 0x0, 0xE, 12, 12, 1);
-		rtl9310_sds_field_w(dSds + 1, 0x0, 0xE, 12, 12, 1);
-		break;
-
-	case PHY_INTERFACE_MODE_USXGMII: // MII_USXGMII_10GSXGMII/10GDXGMII/10GQXGMII:
-		u32 i, evenSds;
-		u32 op_code = 0x6003;
-
-		if (chiptype) {
-			rtl9310_sds_field_w(asds, 0x6, 0x2, 12, 12, 1);
-
-			for (i = 0; i < sizeof(sds_config_10p3125g_type1) / sizeof(sds_config); ++i) {
-				rtl931x_write_sds_phy(asds, sds_config_10p3125g_type1[i].page - 0x4, sds_config_10p3125g_type1[i].reg, sds_config_10p3125g_type1[i].data);
-			}
-
-			evenSds = asds - (asds % 2);
-
-			for (i = 0; i < sizeof(sds_config_10p3125g_cmu_type1) / sizeof(sds_config); ++i) {
-				rtl931x_write_sds_phy(evenSds,
-						      sds_config_10p3125g_cmu_type1[i].page - 0x4, sds_config_10p3125g_cmu_type1[i].reg, sds_config_10p3125g_cmu_type1[i].data);
-			}
-
-			rtl9310_sds_field_w(asds, 0x6, 0x2, 12, 12, 0);
-		} else {
-
-			rtl9310_sds_field_w(asds, 0x2e, 0xd, 6, 0, 0x0);
-			rtl9310_sds_field_w(asds, 0x2e, 0xd, 7, 7, 0x1);
-
-			rtl9310_sds_field_w(asds, 0x2e, 0x1c, 5, 0, 0x1E);
-			rtl9310_sds_field_w(asds, 0x2e, 0x1d, 11, 0, 0x00);
-			rtl9310_sds_field_w(asds, 0x2e, 0x1f, 11, 0, 0x00);
-			rtl9310_sds_field_w(asds, 0x2f, 0x0, 11, 0, 0x00);
-			rtl9310_sds_field_w(asds, 0x2f, 0x1, 11, 0, 0x00);
-
-			rtl9310_sds_field_w(asds, 0x2e, 0xf, 12, 6, 0x7F);
-			rtl931x_write_sds_phy(asds, 0x2f, 0x12, 0xaaa);
-
-			rtl931x_sds_rx_rst(sds);
-
-			rtl931x_write_sds_phy(asds, 0x7, 0x10, op_code);
-			rtl931x_write_sds_phy(asds, 0x6, 0x1d, 0x0480);
-			rtl931x_write_sds_phy(asds, 0x6, 0xe, 0x0400);
-		}
-		break;
-
-	case PHY_INTERFACE_MODE_10GBASER: // MII_10GR / MII_10GR1000BX_AUTO:
-		// configure 10GR fiber mode=1
-		rtl9310_sds_field_w(asds, 0x1f, 0xb, 1, 1, 1);
-
-		// init fiber_1g
-		rtl9310_sds_field_w(dSds, 0x3, 0x13, 15, 14, 0);
-
-		rtl9310_sds_field_w(dSds, 0x2, 0x0, 12, 12, 1);
-		rtl9310_sds_field_w(dSds, 0x2, 0x0, 6, 6, 1);
-		rtl9310_sds_field_w(dSds, 0x2, 0x0, 13, 13, 0);
-
-		// init auto
-		rtl9310_sds_field_w(asds, 0x1f, 13, 15, 0, 0x109e);
-		rtl9310_sds_field_w(asds, 0x1f, 0x6, 14, 10, 0x8);
-		rtl9310_sds_field_w(asds, 0x1f, 0x7, 10, 4, 0x7f);
-		break;
-
-	case PHY_INTERFACE_MODE_HSGMII:
-		rtl9310_sds_field_w(dSds, 0x1, 0x14, 8, 8, 1);
-		break;
-
-	case PHY_INTERFACE_MODE_1000BASEX: // MII_1000BX_FIBER
-		rtl9310_sds_field_w(dSds, 0x3, 0x13, 15, 14, 0);
-
-		rtl9310_sds_field_w(dSds, 0x2, 0x0, 12, 12, 1);
-		rtl9310_sds_field_w(dSds, 0x2, 0x0, 6, 6, 1);
-		rtl9310_sds_field_w(dSds, 0x2, 0x0, 13, 13, 0);
-		break;
-
-	case PHY_INTERFACE_MODE_SGMII:
-		rtl9310_sds_field_w(asds, 0x24, 0x9, 15, 15, 0);
-		break;
-
-	case PHY_INTERFACE_MODE_2500BASEX:
-		rtl9310_sds_field_w(dSds, 0x1, 0x14, 8, 8, 1);
-		break;
-
-	case PHY_INTERFACE_MODE_QSGMII:
-	default:
-		pr_info("%s: PHY mode %s not supported by SerDes %d\n",
-			__func__, phy_modes(mode), sds);
-		return;
-	}
-
-	rtl931x_cmu_type_set(asds, mode, chiptype);
-
-	if (sds >= 2 && sds <= 13) {
-		if (chiptype)
-			rtl931x_write_sds_phy(asds, 0x2E, 0x1, board_sds_tx_type1[sds - 2]);
-		else {
-			val = 0xa0000;
-			sw_w32(val, RTL931X_CHIP_INFO_ADDR);
-			val = sw_r32(RTL931X_CHIP_INFO_ADDR);
-			if (val & BIT(28)) // consider 9311 etc. RTL9313_CHIP_ID == HWP_CHIP_ID(unit))
-			{
-				rtl931x_write_sds_phy(asds, 0x2E, 0x1, board_sds_tx2[sds - 2]);
-			} else {
-				rtl931x_write_sds_phy(asds, 0x2E, 0x1, board_sds_tx[sds - 2]);
-			}
-			val = 0;
-			sw_w32(val, RTL931X_CHIP_INFO_ADDR);
-		}
-	}
-
-	val = ori & ~BIT(sds);
-	sw_w32(val, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR);
-	pr_debug("%s: RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR 0x%08X\n", __func__, sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR));
-
-	if (mode == PHY_INTERFACE_MODE_XGMII || mode == PHY_INTERFACE_MODE_QSGMII
-	    || mode == PHY_INTERFACE_MODE_HSGMII || mode == PHY_INTERFACE_MODE_SGMII
-	    || mode == PHY_INTERFACE_MODE_USXGMII) {
-		if (mode == PHY_INTERFACE_MODE_XGMII)
-			rtl931x_sds_mii_mode_set(sds, mode);
-		else
-			rtl931x_sds_fiber_mode_set(sds, mode);
-	}
-}
-
-int rtl931x_sds_cmu_band_set(int sds, bool enable, u32 band, phy_interface_t mode)
-{
-	u32 asds;
-	int page = rtl931x_sds_cmu_page_get(mode);
-
-	sds -= (sds % 2);
-	sds = sds & ~1;
-	asds = rtl931x_get_analog_sds(sds);
-	page += 1;
-
-	if (enable) {
-		rtl9310_sds_field_w(asds, page, 0x7, 13, 13, 0);
-		rtl9310_sds_field_w(asds, page, 0x7, 11, 11, 0);
-	} else {
-		rtl9310_sds_field_w(asds, page, 0x7, 13, 13, 0);
-		rtl9310_sds_field_w(asds, page, 0x7, 11, 11, 0);
-	}
-		
-	rtl9310_sds_field_w(asds, page, 0x7, 4, 0, band);
-
-	rtl931x_sds_rst(sds);
-
-	return 0;
-}
-
-int rtl931x_sds_cmu_band_get(int sds, phy_interface_t mode)
-{
-	int page = rtl931x_sds_cmu_page_get(mode);
-	u32 asds, band;
-
-	sds -= (sds % 2);
-	asds = rtl931x_get_analog_sds(sds);
-	page += 1;
-	rtl931x_write_sds_phy(asds, 0x1f, 0x02, 73);
-
-	rtl9310_sds_field_w(asds, page, 0x5, 15, 15, 1);
-	band = rtl9310_sds_field_r(asds, 0x1f, 0x15, 8, 3);
-	pr_info("%s band is: %d\n", __func__, band);
-
-	return band;
-}
-
-
-int rtl931x_link_sts_get(u32 sds)
-{
-	u32 sts, sts1, latch_sts, latch_sts1;
-	if (0){
-		u32 xsg_sdsid_0, xsg_sdsid_1;
-
-		xsg_sdsid_0 = sds < 2 ? sds : (sds - 1) * 2;
-		xsg_sdsid_1 = xsg_sdsid_0 + 1;
-
-		sts = rtl9310_sds_field_r(xsg_sdsid_0, 0x1, 29, 8, 0);
-		sts1 = rtl9310_sds_field_r(xsg_sdsid_1, 0x1, 29, 8, 0);
-		latch_sts = rtl9310_sds_field_r(xsg_sdsid_0, 0x1, 30, 8, 0);
-		latch_sts1 = rtl9310_sds_field_r(xsg_sdsid_1, 0x1, 30, 8, 0);
-	} else {
-		u32  asds, dsds;
-
-		asds = rtl931x_get_analog_sds(sds);
-		sts = rtl9310_sds_field_r(asds, 0x5, 0, 12, 12);
-		latch_sts = rtl9310_sds_field_r(asds, 0x4, 1, 2, 2);
-
-		dsds = sds < 2 ? sds : (sds - 1) * 2;
-		latch_sts1 = rtl9310_sds_field_r(dsds, 0x2, 1, 2, 2);
-		sts1 = rtl9310_sds_field_r(dsds, 0x2, 1, 2, 2);
-	}
-
-	pr_info("%s: serdes %d sts %d, sts1 %d, latch_sts %d, latch_sts1 %d\n", __func__,
-		sds, sts, sts1, latch_sts, latch_sts1);
-	return sts1;
-}
-
-static int rtl8214fc_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-{
-	struct phy_device *phydev = upstream;
-
-	rtl8214fc_media_set(phydev, true);
-
-	return 0;
-}
-
-static void rtl8214fc_sfp_remove(void *upstream)
-{
-	struct phy_device *phydev = upstream;
-
-	rtl8214fc_media_set(phydev, false);
-}
-
-static const struct sfp_upstream_ops rtl8214fc_sfp_ops = {
-	.attach = phy_sfp_attach,
-	.detach = phy_sfp_detach,
-	.module_insert = rtl8214fc_sfp_insert,
-	.module_remove = rtl8214fc_sfp_remove,
-};
-
-static int rtl8214fc_phy_probe(struct phy_device *phydev)
-{
-	struct device *dev = &phydev->mdio.dev;
-	int addr = phydev->mdio.addr;
-	int ret = 0;
-
-	/* 839x has internal SerDes */
-	if (soc_info.id == 0x8393)
-		return -ENODEV;
-
-	/* All base addresses of the PHYs start at multiples of 8 */
-	devm_phy_package_join(dev, phydev, addr & (~7),
-				sizeof(struct rtl83xx_shared_private));
-
-	if (!(addr % 8)) {
-		struct rtl83xx_shared_private *shared = phydev->shared->priv;
-		shared->name = "RTL8214FC";
-		/* Configuration must be done while patching still possible */
-		ret = rtl8380_configure_rtl8214fc(phydev);
-		if (ret)
-			return ret;
-	}
-
-	return phy_sfp_probe(phydev, &rtl8214fc_sfp_ops);
-}
-
-static int rtl8214c_phy_probe(struct phy_device *phydev)
-{
-	struct device *dev = &phydev->mdio.dev;
-	int addr = phydev->mdio.addr;
-
-	/* All base addresses of the PHYs start at multiples of 8 */
-	devm_phy_package_join(dev, phydev, addr & (~7),
-				sizeof(struct rtl83xx_shared_private));
-
-	if (!(addr % 8)) {
-		struct rtl83xx_shared_private *shared = phydev->shared->priv;
-		shared->name = "RTL8214C";
-		/* Configuration must be done whil patching still possible */
-		return rtl8380_configure_rtl8214c(phydev);
-	}
-	return 0;
-}
-
-static int rtl8218b_ext_phy_probe(struct phy_device *phydev)
-{
-	struct device *dev = &phydev->mdio.dev;
-	int addr = phydev->mdio.addr;
-
-	/* All base addresses of the PHYs start at multiples of 8 */
-	devm_phy_package_join(dev, phydev, addr & (~7),
-				sizeof(struct rtl83xx_shared_private));
-
-	if (!(addr % 8)) {
-		struct rtl83xx_shared_private *shared = phydev->shared->priv;
-		shared->name = "RTL8218B (external)";
-		if (soc_info.family == RTL8380_FAMILY_ID) {
-			/* Configuration must be done while patching still possible */
-			return rtl8380_configure_ext_rtl8218b(phydev);
-		}
-	}
-
-	return 0;
-}
-
-static int rtl8218b_int_phy_probe(struct phy_device *phydev)
-{
-	struct device *dev = &phydev->mdio.dev;
-	int addr = phydev->mdio.addr;
-
-	if (soc_info.family != RTL8380_FAMILY_ID)
-		return -ENODEV;
-	if (addr >= 24)
-		return -ENODEV;
-
-	pr_debug("%s: id: %d\n", __func__, addr);
-	/* All base addresses of the PHYs start at multiples of 8 */
-	devm_phy_package_join(dev, phydev, addr & (~7),
-			      sizeof(struct rtl83xx_shared_private));
-
-	if (!(addr % 8)) {
-		struct rtl83xx_shared_private *shared = phydev->shared->priv;
-		shared->name = "RTL8218B (internal)";
-		/* Configuration must be done while patching still possible */
-		return rtl8380_configure_int_rtl8218b(phydev);
-	}
-
-	return 0;
-}
-
-static int rtl8218d_phy_probe(struct phy_device *phydev)
-{
-	struct device *dev = &phydev->mdio.dev;
-	int addr = phydev->mdio.addr;
-
-	pr_debug("%s: id: %d\n", __func__, addr);
-	/* All base addresses of the PHYs start at multiples of 8 */
-	devm_phy_package_join(dev, phydev, addr & (~7),
-			      sizeof(struct rtl83xx_shared_private));
-
-	/* All base addresses of the PHYs start at multiples of 8 */
-	if (!(addr % 8)) {
-		struct rtl83xx_shared_private *shared = phydev->shared->priv;
-		shared->name = "RTL8218D";
-		/* Configuration must be done while patching still possible */
-// TODO:		return configure_rtl8218d(phydev);
-	}
-	return 0;
-}
-
-static int rtl838x_serdes_probe(struct phy_device *phydev)
-{
-	int addr = phydev->mdio.addr;
-
-	if (soc_info.family != RTL8380_FAMILY_ID)
-		return -ENODEV;
-	if (addr < 24)
-		return -ENODEV;
-
-	/* On the RTL8380M, PHYs 24-27 connect to the internal SerDes */
-	if (soc_info.id == 0x8380) {
-		if (addr == 24)
-			return rtl8380_configure_serdes(phydev);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static int rtl8393_serdes_probe(struct phy_device *phydev)
-{
-	int addr = phydev->mdio.addr;
-
-	pr_info("%s: id: %d\n", __func__, addr);
-	if (soc_info.family != RTL8390_FAMILY_ID)
-		return -ENODEV;
-
-	if (addr < 24)
-		return -ENODEV;
-
-	return rtl8390_configure_serdes(phydev);
-}
-
-static int rtl8390_serdes_probe(struct phy_device *phydev)
-{
-	int addr = phydev->mdio.addr;
-
-	if (soc_info.family != RTL8390_FAMILY_ID)
-		return -ENODEV;
-
-	if (addr < 24)
-		return -ENODEV;
-
-	return rtl8390_configure_generic(phydev);
-}
-
-static int rtl9300_serdes_probe(struct phy_device *phydev)
-{
-	if (soc_info.family != RTL9300_FAMILY_ID)
-		return -ENODEV;
-
-	phydev_info(phydev, "Detected internal RTL9300 Serdes\n");
-
-	return rtl9300_configure_serdes(phydev);
-}
-
-static struct phy_driver rtl83xx_phy_driver[] = {
-	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8214C),
-		.name		= "Realtek RTL8214C",
-		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_REALTEK_PAGES,
-		.match_phy_device = rtl8214c_match_phy_device,
-		.probe		= rtl8214c_phy_probe,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.set_loopback	= genphy_loopback,
-	},
-	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8214FC),
-		.name		= "Realtek RTL8214FC",
-		.features	= PHY_GBIT_FIBRE_FEATURES,
-		.flags		= PHY_HAS_REALTEK_PAGES,
-		.match_phy_device = rtl8214fc_match_phy_device,
-		.probe		= rtl8214fc_phy_probe,
-		.suspend	= rtl8214fc_suspend,
-		.resume		= rtl8214fc_resume,
-		.set_loopback	= genphy_loopback,
-		.set_port	= rtl8214fc_set_port,
-		.get_port	= rtl8214fc_get_port,
-		.set_eee	= rtl8214fc_set_eee,
-		.get_eee	= rtl8214fc_get_eee,
-	},
-	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_E),
-		.name		= "Realtek RTL8218B (external)",
-		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_REALTEK_PAGES,
-		.match_phy_device = rtl8218b_ext_match_phy_device,
-		.probe		= rtl8218b_ext_phy_probe,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.set_loopback	= genphy_loopback,
-		.set_eee	= rtl8218b_set_eee,
-		.get_eee	= rtl8218b_get_eee,
-	},
-	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8218D),
-		.name		= "REALTEK RTL8218D",
-		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_REALTEK_PAGES,
-		.probe		= rtl8218d_phy_probe,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.set_loopback	= genphy_loopback,
-		.set_eee	= rtl8218d_set_eee,
-		.get_eee	= rtl8218d_get_eee,
-	},
-	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8221B),
-		.name           = "REALTEK RTL8221B",
-		.features       = PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_REALTEK_PAGES,
-		.suspend        = genphy_suspend,
-		.resume         = genphy_resume,
-		.set_loopback   = genphy_loopback,
-		.read_page      = rtl8226_read_page,
-		.write_page     = rtl8226_write_page,
-		.read_status    = rtl8226_read_status,
-		.config_aneg    = rtl8226_config_aneg,
-		.set_eee        = rtl8226_set_eee,
-		.get_eee        = rtl8226_get_eee,
-	},
-	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8226),
-		.name		= "REALTEK RTL8226",
-		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_REALTEK_PAGES,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.set_loopback	= genphy_loopback,
-		.read_page	= rtl8226_read_page,
-		.write_page	= rtl8226_write_page,
-		.read_status	= rtl8226_read_status,
-		.config_aneg	= rtl8226_config_aneg,
-		.set_eee	= rtl8226_set_eee,
-		.get_eee	= rtl8226_get_eee,
-	},
-	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_I),
-		.name		= "Realtek RTL8218B (internal)",
-		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_REALTEK_PAGES,
-		.probe		= rtl8218b_int_phy_probe,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.set_loopback	= genphy_loopback,
-		.set_eee	= rtl8218b_set_eee,
-		.get_eee	= rtl8218b_get_eee,
-	},
-	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_I),
-		.name		= "Realtek RTL8380 SERDES",
-		.features	= PHY_GBIT_FIBRE_FEATURES,
-		.flags		= PHY_HAS_REALTEK_PAGES,
-		.probe		= rtl838x_serdes_probe,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.set_loopback	= genphy_loopback,
-		.read_status	= rtl8380_read_status,
-	},
-	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8393_I),
-		.name		= "Realtek RTL8393 SERDES",
-		.features	= PHY_GBIT_FIBRE_FEATURES,
-		.flags		= PHY_HAS_REALTEK_PAGES,
-		.probe		= rtl8393_serdes_probe,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.set_loopback	= genphy_loopback,
-		.read_status	= rtl8393_read_status,
-	},
-	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL8390_GENERIC),
-		.name		= "Realtek RTL8390 Generic",
-		.features	= PHY_GBIT_FIBRE_FEATURES,
-		.flags		= PHY_HAS_REALTEK_PAGES,
-		.probe		= rtl8390_serdes_probe,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.set_loopback	= genphy_loopback,
-	},
-	{
-		PHY_ID_MATCH_MODEL(PHY_ID_RTL9300_I),
-		.name		= "REALTEK RTL9300 SERDES",
-		.features	= PHY_GBIT_FIBRE_FEATURES,
-		.flags		= PHY_HAS_REALTEK_PAGES,
-		.probe		= rtl9300_serdes_probe,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.set_loopback	= genphy_loopback,
-		.read_status	= rtl9300_read_status,
-	},
-};
-
-module_phy_driver(rtl83xx_phy_driver);
-
-static struct mdio_device_id __maybe_unused rtl83xx_tbl[] = {
-	{ PHY_ID_MATCH_MODEL(PHY_ID_RTL8214FC) },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(mdio, rtl83xx_tbl);
-
-MODULE_AUTHOR("B. Koblitz");
-MODULE_DESCRIPTION("RTL83xx PHY driver");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.h b/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.h
deleted file mode 100644
index 553d9a1575e6..000000000000
--- a/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.h
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-struct rtl83xx_shared_private {
-	char *name;
-};
-
-struct __attribute__ ((__packed__)) part {
-	uint16_t start;
-	uint8_t wordsize;
-	uint8_t words;
-};
-
-struct __attribute__ ((__packed__)) fw_header {
-	uint32_t magic;
-	uint32_t phy;
-	uint32_t checksum;
-	uint32_t version;
-	struct part parts[10];
-};
-
-// TODO: fixed path?
-#define FIRMWARE_838X_8380_1	"rtl838x_phy/rtl838x_8380.fw"
-#define FIRMWARE_838X_8214FC_1	"rtl838x_phy/rtl838x_8214fc.fw"
-#define FIRMWARE_838X_8218b_1	"rtl838x_phy/rtl838x_8218b.fw"
-
-/* External RTL8218B and RTL8214FC IDs are identical */
-#define PHY_ID_RTL8214C		0x001cc942
-#define PHY_ID_RTL8214FC	0x001cc981
-#define PHY_ID_RTL8218B_E	0x001cc981
-#define PHY_ID_RTL8218D		0x001cc983
-#define PHY_ID_RTL8218B_I	0x001cca40
-#define PHY_ID_RTL8221B		0x001cc849
-#define PHY_ID_RTL8226		0x001cc838
-#define PHY_ID_RTL8390_GENERIC	0x001ccab0
-#define PHY_ID_RTL8393_I	0x001c8393
-#define PHY_ID_RTL9300_I	0x70d03106
-
-// PHY MMD devices
-#define MMD_AN		7
-#define MMD_VEND2	31
-
-/* Registers of the internal Serdes of the 8380 */
-#define RTL838X_SDS_MODE_SEL			(0x0028)
-#define RTL838X_SDS_CFG_REG			(0x0034)
-#define RTL838X_INT_MODE_CTRL			(0x005c)
-#define RTL838X_DMY_REG31			(0x3b28)
-
-#define RTL8380_SDS4_FIB_REG0			(0xF800)
-#define RTL838X_SDS4_REG28			(0xef80)
-#define RTL838X_SDS4_DUMMY0			(0xef8c)
-#define RTL838X_SDS5_EXT_REG6			(0xf18c)
-#define RTL838X_SDS4_FIB_REG0			(RTL838X_SDS4_REG28 + 0x880)
-#define RTL838X_SDS5_FIB_REG0			(RTL838X_SDS4_REG28 + 0x980)
-
-/* Registers of the internal SerDes of the RTL8390 */
-#define RTL839X_SDS12_13_XSG0			(0xB800)
-
-/* Registers of the internal Serdes of the 9300 */
-#define RTL930X_SDS_INDACS_CMD			(0x03B0)
-#define RTL930X_SDS_INDACS_DATA			(0x03B4)
-#define RTL930X_MAC_FORCE_MODE_CTRL		(0xCA1C)
-
-/*Registers of the internal SerDes of the 9310 */
-#define RTL931X_SERDES_INDRT_ACCESS_CTRL	(0x5638)
-#define RTL931X_SERDES_INDRT_DATA_CTRL		(0x563C)
-#define RTL931X_SERDES_MODE_CTRL		(0x13cc)
-#define RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR	(0x13F4)
-#define RTL931X_MAC_SERDES_MODE_CTRL(sds)	(0x136C + (((sds) << 2)))
diff --git a/target/linux/realtek/files-5.10/include/dt-bindings/clock/rtl83xx-clk.h b/target/linux/realtek/files-5.10/include/dt-bindings/clock/rtl83xx-clk.h
deleted file mode 100644
index 3937052cc50f..000000000000
--- a/target/linux/realtek/files-5.10/include/dt-bindings/clock/rtl83xx-clk.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2022 Markus Stockhausen
- *
- * RTL83XX clock indices
- */
-#ifndef __DT_BINDINGS_CLOCK_RTL83XX_H
-#define __DT_BINDINGS_CLOCK_RTL83XX_H
-
-#define CLK_CPU		0
-#define CLK_MEM		1
-#define CLK_LXB		2
-#define CLK_COUNT	3
-
-#endif /* __DT_BINDINGS_CLOCK_RTL83XX_H */
diff --git a/target/linux/realtek/patches-5.10/001-5.13-dt-bindings-gpio-binding-for-realtek-otto-gpio.patch b/target/linux/realtek/patches-5.10/001-5.13-dt-bindings-gpio-binding-for-realtek-otto-gpio.patch
deleted file mode 100644
index 80b806d89ffe..000000000000
--- a/target/linux/realtek/patches-5.10/001-5.13-dt-bindings-gpio-binding-for-realtek-otto-gpio.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From a362c0ce64866939c3daa17c76943cfed555b065 Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Tue, 30 Mar 2021 19:48:42 +0200
-Subject: dt-bindings: gpio: Binding for Realtek Otto GPIO
-
-Add a binding description for Realtek's GPIO controller found on several
-of their MIPS-based SoCs (codenamed Otto), such as the RTL838x and
-RTL839x series of switch SoCs.
-
-A fallback binding 'realtek,otto-gpio' is provided for cases where the
-actual port ordering is not known yet, and enabling the interrupt
-controller may result in uncaught interrupts.
-
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
----
- .../bindings/gpio/realtek,otto-gpio.yaml           | 78 ++++++++++++++++++++++
- 1 file changed, 78 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
-@@ -0,0 +1,78 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/gpio/realtek,otto-gpio.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Realtek Otto GPIO controller
-+
-+maintainers:
-+  - Sander Vanheule <sander@svanheule.net>
-+  - Bert Vermeulen <bert@biot.com>
-+
-+description: |
-+  Realtek's GPIO controller on their MIPS switch SoCs (Otto platform) consists
-+  of two banks of 32 GPIOs. These GPIOs can generate edge-triggered interrupts.
-+  Each bank's interrupts are cascased into one interrupt line on the parent
-+  interrupt controller, if provided.
-+  This binding allows defining a single bank in the devicetree. The interrupt
-+  controller is not supported on the fallback compatible name, which only
-+  allows for GPIO port use.
-+
-+properties:
-+  $nodename:
-+    pattern: "^gpio@[0-9a-f]+$"
-+
-+  compatible:
-+    items:
-+      - enum:
-+          - realtek,rtl8380-gpio
-+          - realtek,rtl8390-gpio
-+      - const: realtek,otto-gpio
-+
-+  reg:
-+    maxItems: 1
-+
-+  "#gpio-cells":
-+    const: 2
-+
-+  gpio-controller: true
-+
-+  ngpios:
-+    minimum: 1
-+    maximum: 32
-+
-+  interrupt-controller: true
-+
-+  "#interrupt-cells":
-+    const: 2
-+
-+  interrupts:
-+    maxItems: 1
-+
-+required:
-+  - compatible
-+  - reg
-+  - "#gpio-cells"
-+  - gpio-controller
-+
-+additionalProperties: false
-+
-+dependencies:
-+  interrupt-controller: [ interrupts ]
-+
-+examples:
-+  - |
-+      gpio@3500 {
-+        compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
-+        reg = <0x3500 0x1c>;
-+        gpio-controller;
-+        #gpio-cells = <2>;
-+        ngpios = <24>;
-+        interrupt-controller;
-+        #interrupt-cells = <2>;
-+        interrupt-parent = <&rtlintc>;
-+        interrupts = <23>;
-+      };
-+
-+...
diff --git a/target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch b/target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch
deleted file mode 100644
index 62e4338cbb27..000000000000
--- a/target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch
+++ /dev/null
@@ -1,394 +0,0 @@
-From f0f7d662e8514169c90d3d84cd6df773b2983088 Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Tue, 30 Mar 2021 19:48:43 +0200
-Subject: gpio: Add Realtek Otto GPIO support
-
-Realtek MIPS SoCs (platform name Otto) have GPIO controllers with up to
-64 GPIOs, divided over two banks. Each bank has a set of registers for
-32 GPIOs, with support for edge-triggered interrupts.
-
-Each GPIO bank consists of four 8-bit GPIO ports (ABCD and EFGH). Most
-registers pack one bit per GPIO, except for the IMR register, which
-packs two bits per GPIO (AB-CD).
-
-Although the byte order is currently assumed to have port A..D at offset
-0x0..0x3, this has been observed to be reversed on other, Lexra-based,
-SoCs (e.g. RTL8196E/97D/97F).
-
-Interrupt support is disabled for the fallback devicetree-compatible
-'realtek,otto-gpio'. This allows for quick support of GPIO banks in
-which the byte order would be unknown. In this case, the port ordering
-in the IMR registers may not match the reversed order in the other
-registers (DCBA, and BA-DC or DC-BA).
-
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
-Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
-Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
----
- drivers/gpio/Kconfig             |  13 ++
- drivers/gpio/Makefile            |   1 +
- drivers/gpio/gpio-realtek-otto.c | 325 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 339 insertions(+)
- create mode 100644 drivers/gpio/gpio-realtek-otto.c
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -489,6 +489,19 @@ config GPIO_RDA
- 	help
- 	  Say Y here to support RDA Micro GPIO controller.
- 
-+config GPIO_REALTEK_OTTO
-+	tristate "Realtek Otto GPIO support"
-+	depends on MACH_REALTEK_RTL
-+	default MACH_REALTEK_RTL
-+	select GPIO_GENERIC
-+	select GPIOLIB_IRQCHIP
-+	help
-+	  The GPIO controller on the Otto MIPS platform supports up to two
-+	  banks of 32 GPIOs, with edge triggered interrupts. The 32 GPIOs
-+	  are grouped in four 8-bit wide ports.
-+
-+	  When built as a module, the module will be called realtek_otto_gpio.
-+
- config GPIO_REG
- 	bool
- 	help
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -125,6 +125,7 @@ obj-$(CONFIG_GPIO_RC5T583)		+= gpio-rc5t
- obj-$(CONFIG_GPIO_RCAR)			+= gpio-rcar.o
- obj-$(CONFIG_GPIO_RDA)			+= gpio-rda.o
- obj-$(CONFIG_GPIO_RDC321X)		+= gpio-rdc321x.o
-+obj-$(CONFIG_GPIO_REALTEK_OTTO)		+= gpio-realtek-otto.o
- obj-$(CONFIG_GPIO_REG)			+= gpio-reg.o
- obj-$(CONFIG_ARCH_SA1100)		+= gpio-sa1100.o
- obj-$(CONFIG_GPIO_SAMA5D2_PIOBU)	+= gpio-sama5d2-piobu.o
---- /dev/null
-+++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -0,0 +1,325 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+
-+#include <linux/gpio/driver.h>
-+#include <linux/irq.h>
-+#include <linux/minmax.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/property.h>
-+
-+/*
-+ * Total register block size is 0x1C for one bank of four ports (A, B, C, D).
-+ * An optional second bank, with ports E, F, G, and H, may be present, starting
-+ * at register offset 0x1C.
-+ */
-+
-+/*
-+ * Pin select: (0) "normal", (1) "dedicate peripheral"
-+ * Not used on RTL8380/RTL8390, peripheral selection is managed by control bits
-+ * in the peripheral registers.
-+ */
-+#define REALTEK_GPIO_REG_CNR		0x00
-+/* Clear bit (0) for input, set bit (1) for output */
-+#define REALTEK_GPIO_REG_DIR		0x08
-+#define REALTEK_GPIO_REG_DATA		0x0C
-+/* Read bit for IRQ status, write 1 to clear IRQ */
-+#define REALTEK_GPIO_REG_ISR		0x10
-+/* Two bits per GPIO in IMR registers */
-+#define REALTEK_GPIO_REG_IMR		0x14
-+#define REALTEK_GPIO_REG_IMR_AB		0x14
-+#define REALTEK_GPIO_REG_IMR_CD		0x18
-+#define REALTEK_GPIO_IMR_LINE_MASK	GENMASK(1, 0)
-+#define REALTEK_GPIO_IRQ_EDGE_FALLING	1
-+#define REALTEK_GPIO_IRQ_EDGE_RISING	2
-+#define REALTEK_GPIO_IRQ_EDGE_BOTH	3
-+
-+#define REALTEK_GPIO_MAX		32
-+#define REALTEK_GPIO_PORTS_PER_BANK	4
-+
-+/**
-+ * realtek_gpio_ctrl - Realtek Otto GPIO driver data
-+ *
-+ * @gc: Associated gpio_chip instance
-+ * @base: Base address of the register block for a GPIO bank
-+ * @lock: Lock for accessing the IRQ registers and values
-+ * @intr_mask: Mask for interrupts lines
-+ * @intr_type: Interrupt type selection
-+ *
-+ * Because the interrupt mask register (IMR) combines the function of IRQ type
-+ * selection and masking, two extra values are stored. @intr_mask is used to
-+ * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store
-+ * the selected interrupt types. The logical AND of these values is written to
-+ * IMR on changes.
-+ */
-+struct realtek_gpio_ctrl {
-+	struct gpio_chip gc;
-+	void __iomem *base;
-+	raw_spinlock_t lock;
-+	u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
-+	u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
-+};
-+
-+/* Expand with more flags as devices with other quirks are added */
-+enum realtek_gpio_flags {
-+	/*
-+	 * Allow disabling interrupts, for cases where the port order is
-+	 * unknown. This may result in a port mismatch between ISR and IMR.
-+	 * An interrupt would appear to come from a different line than the
-+	 * line the IRQ handler was assigned to, causing uncaught interrupts.
-+	 */
-+	GPIO_INTERRUPTS_DISABLED = BIT(0),
-+};
-+
-+static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
-+{
-+	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
-+
-+	return container_of(gc, struct realtek_gpio_ctrl, gc);
-+}
-+
-+/*
-+ * Normal port order register access
-+ *
-+ * Port information is stored with the first port at offset 0, followed by the
-+ * second, etc. Most registers store one bit per GPIO and use a u8 value per
-+ * port. The two interrupt mask registers store two bits per GPIO, so use u16
-+ * values.
-+ */
-+static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl,
-+	unsigned int port, u16 irq_type, u16 irq_mask)
-+{
-+	iowrite16(irq_type & irq_mask, ctrl->base + REALTEK_GPIO_REG_IMR + 2 * port);
-+}
-+
-+static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl,
-+	unsigned int port, u8 mask)
-+{
-+	iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + port);
-+}
-+
-+static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port)
-+{
-+	return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + port);
-+}
-+
-+/* Set the rising and falling edge mask bits for a GPIO port pin */
-+static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value)
-+{
-+	return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin;
-+}
-+
-+static void realtek_gpio_irq_ack(struct irq_data *data)
-+{
-+	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
-+	irq_hw_number_t line = irqd_to_hwirq(data);
-+	unsigned int port = line / 8;
-+	unsigned int port_pin = line % 8;
-+
-+	realtek_gpio_clear_isr(ctrl, port, BIT(port_pin));
-+}
-+
-+static void realtek_gpio_irq_unmask(struct irq_data *data)
-+{
-+	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
-+	unsigned int line = irqd_to_hwirq(data);
-+	unsigned int port = line / 8;
-+	unsigned int port_pin = line % 8;
-+	unsigned long flags;
-+	u16 m;
-+
-+	raw_spin_lock_irqsave(&ctrl->lock, flags);
-+	m = ctrl->intr_mask[port];
-+	m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
-+	ctrl->intr_mask[port] = m;
-+	realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
-+	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
-+}
-+
-+static void realtek_gpio_irq_mask(struct irq_data *data)
-+{
-+	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
-+	unsigned int line = irqd_to_hwirq(data);
-+	unsigned int port = line / 8;
-+	unsigned int port_pin = line % 8;
-+	unsigned long flags;
-+	u16 m;
-+
-+	raw_spin_lock_irqsave(&ctrl->lock, flags);
-+	m = ctrl->intr_mask[port];
-+	m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
-+	ctrl->intr_mask[port] = m;
-+	realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
-+	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
-+}
-+
-+static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
-+{
-+	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
-+	unsigned int line = irqd_to_hwirq(data);
-+	unsigned int port = line / 8;
-+	unsigned int port_pin = line % 8;
-+	unsigned long flags;
-+	u16 type, t;
-+
-+	switch (flow_type & IRQ_TYPE_SENSE_MASK) {
-+	case IRQ_TYPE_EDGE_FALLING:
-+		type = REALTEK_GPIO_IRQ_EDGE_FALLING;
-+		break;
-+	case IRQ_TYPE_EDGE_RISING:
-+		type = REALTEK_GPIO_IRQ_EDGE_RISING;
-+		break;
-+	case IRQ_TYPE_EDGE_BOTH:
-+		type = REALTEK_GPIO_IRQ_EDGE_BOTH;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	irq_set_handler_locked(data, handle_edge_irq);
-+
-+	raw_spin_lock_irqsave(&ctrl->lock, flags);
-+	t = ctrl->intr_type[port];
-+	t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
-+	t |= realtek_gpio_imr_bits(port_pin, type);
-+	ctrl->intr_type[port] = t;
-+	realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]);
-+	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
-+
-+	return 0;
-+}
-+
-+static void realtek_gpio_irq_handler(struct irq_desc *desc)
-+{
-+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
-+	struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
-+	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
-+	unsigned int lines_done;
-+	unsigned int port_pin_count;
-+	unsigned int irq;
-+	unsigned long status;
-+	int offset;
-+
-+	chained_irq_enter(irq_chip, desc);
-+
-+	for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) {
-+		status = realtek_gpio_read_isr(ctrl, lines_done / 8);
-+		port_pin_count = min(gc->ngpio - lines_done, 8U);
-+		for_each_set_bit(offset, &status, port_pin_count) {
-+			irq = irq_find_mapping(gc->irq.domain, offset);
-+			generic_handle_irq(irq);
-+		}
-+	}
-+
-+	chained_irq_exit(irq_chip, desc);
-+}
-+
-+static int realtek_gpio_irq_init(struct gpio_chip *gc)
-+{
-+	struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
-+	unsigned int port;
-+
-+	for (port = 0; (port * 8) < gc->ngpio; port++) {
-+		realtek_gpio_write_imr(ctrl, port, 0, 0);
-+		realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
-+	}
-+
-+	return 0;
-+}
-+
-+static struct irq_chip realtek_gpio_irq_chip = {
-+	.name = "realtek-otto-gpio",
-+	.irq_ack = realtek_gpio_irq_ack,
-+	.irq_mask = realtek_gpio_irq_mask,
-+	.irq_unmask = realtek_gpio_irq_unmask,
-+	.irq_set_type = realtek_gpio_irq_set_type,
-+};
-+
-+static const struct of_device_id realtek_gpio_of_match[] = {
-+	{
-+		.compatible = "realtek,otto-gpio",
-+		.data = (void *)GPIO_INTERRUPTS_DISABLED,
-+	},
-+	{
-+		.compatible = "realtek,rtl8380-gpio",
-+	},
-+	{
-+		.compatible = "realtek,rtl8390-gpio",
-+	},
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, realtek_gpio_of_match);
-+
-+static int realtek_gpio_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	unsigned int dev_flags;
-+	struct gpio_irq_chip *girq;
-+	struct realtek_gpio_ctrl *ctrl;
-+	u32 ngpios;
-+	int err, irq;
-+
-+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
-+	if (!ctrl)
-+		return -ENOMEM;
-+
-+	dev_flags = (unsigned int) device_get_match_data(dev);
-+
-+	ngpios = REALTEK_GPIO_MAX;
-+	device_property_read_u32(dev, "ngpios", &ngpios);
-+
-+	if (ngpios > REALTEK_GPIO_MAX) {
-+		dev_err(&pdev->dev, "invalid ngpios (max. %d)\n",
-+			REALTEK_GPIO_MAX);
-+		return -EINVAL;
-+	}
-+
-+	ctrl->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(ctrl->base))
-+		return PTR_ERR(ctrl->base);
-+
-+	raw_spin_lock_init(&ctrl->lock);
-+
-+	err = bgpio_init(&ctrl->gc, dev, 4,
-+		ctrl->base + REALTEK_GPIO_REG_DATA, NULL, NULL,
-+		ctrl->base + REALTEK_GPIO_REG_DIR, NULL,
-+		BGPIOF_BIG_ENDIAN_BYTE_ORDER);
-+	if (err) {
-+		dev_err(dev, "unable to init generic GPIO");
-+		return err;
-+	}
-+
-+	ctrl->gc.ngpio = ngpios;
-+	ctrl->gc.owner = THIS_MODULE;
-+
-+	irq = platform_get_irq_optional(pdev, 0);
-+	if (!(dev_flags & GPIO_INTERRUPTS_DISABLED) && irq > 0) {
-+		girq = &ctrl->gc.irq;
-+		girq->chip = &realtek_gpio_irq_chip;
-+		girq->default_type = IRQ_TYPE_NONE;
-+		girq->handler = handle_bad_irq;
-+		girq->parent_handler = realtek_gpio_irq_handler;
-+		girq->num_parents = 1;
-+		girq->parents = devm_kcalloc(dev, girq->num_parents,
-+					sizeof(*girq->parents),	GFP_KERNEL);
-+		if (!girq->parents)
-+			return -ENOMEM;
-+		girq->parents[0] = irq;
-+		girq->init_hw = realtek_gpio_irq_init;
-+	}
-+
-+	return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
-+}
-+
-+static struct platform_driver realtek_gpio_driver = {
-+	.driver = {
-+		.name = "realtek-otto-gpio",
-+		.of_match_table	= realtek_gpio_of_match,
-+	},
-+	.probe = realtek_gpio_probe,
-+};
-+module_platform_driver(realtek_gpio_driver);
-+
-+MODULE_DESCRIPTION("Realtek Otto GPIO support");
-+MODULE_AUTHOR("Sander Vanheule <sander@svanheule.net>");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/realtek/patches-5.10/003-5.12-spi-realtek-rtl838x-rtl839x-spi-controller.patch b/target/linux/realtek/patches-5.10/003-5.12-spi-realtek-rtl838x-rtl839x-spi-controller.patch
deleted file mode 100644
index 325e904994a7..000000000000
--- a/target/linux/realtek/patches-5.10/003-5.12-spi-realtek-rtl838x-rtl839x-spi-controller.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 6acbd614c2c8d3b8de5fb7605d6e24b9b3a8a17b Mon Sep 17 00:00:00 2001
-From: Bert Vermeulen <bert@biot.com>
-Date: Wed, 20 Jan 2021 14:59:27 +0100
-Subject: spi: Realtek RTL838x/RTL839x SPI controller
-
-Signed-off-by: Bert Vermeulen <bert@biot.com>
-Link: https://lore.kernel.org/r/20210120135928.246054-2-bert@biot.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- .../devicetree/bindings/spi/realtek,rtl-spi.yaml   | 41 ++++++++++++++++++++++
- 1 file changed, 41 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
-@@ -0,0 +1,41 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/spi/realtek,rtl-spi.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Realtek RTL838x/RTL839x SPI controller
-+
-+maintainers:
-+  - Bert Vermeulen <bert@biot.com>
-+  - Birger Koblitz <mail@birger-koblitz.de>
-+
-+allOf:
-+  - $ref: "spi-controller.yaml#"
-+
-+properties:
-+  compatible:
-+    oneOf:
-+      - const: realtek,rtl8380-spi
-+      - const: realtek,rtl8382-spi
-+      - const: realtek,rtl8391-spi
-+      - const: realtek,rtl8392-spi
-+      - const: realtek,rtl8393-spi
-+
-+  reg:
-+    maxItems: 1
-+
-+required:
-+  - compatible
-+  - reg
-+
-+unevaluatedProperties: false
-+
-+examples:
-+  - |
-+    spi: spi@1200 {
-+        compatible = "realtek,rtl8382-spi";
-+        reg = <0x1200 0x100>;
-+        #address-cells = <1>;
-+        #size-cells = <0>;
-+    };
diff --git a/target/linux/realtek/patches-5.10/004-5.12-spi-realtek-rtl-add-support-for-realtek-rtl838x-rtl839x-spi-controllers.patch b/target/linux/realtek/patches-5.10/004-5.12-spi-realtek-rtl-add-support-for-realtek-rtl838x-rtl839x-spi-controllers.patch
deleted file mode 100644
index 090847baad7d..000000000000
--- a/target/linux/realtek/patches-5.10/004-5.12-spi-realtek-rtl-add-support-for-realtek-rtl838x-rtl839x-spi-controllers.patch
+++ /dev/null
@@ -1,248 +0,0 @@
-From a8af5cc2ff1e804694629a8ef320935629dd15ba Mon Sep 17 00:00:00 2001
-From: Bert Vermeulen <bert@biot.com>
-Date: Wed, 20 Jan 2021 14:59:28 +0100
-Subject: spi: realtek-rtl: Add support for Realtek RTL838x/RTL839x SPI
- controllers
-
-This driver likely also supports earlier (RTL8196) and later (RTL93xx)
-SoCs.
-
-The SPI hardware in these SoCs is specifically intended for connecting NOR
-bootflash chips, and only used for that in dozens of examined devices.
-However boiled down to basics, it's really just a half-duplex SPI
-controller.
-
-The hardware appears to have a vestigial second chip-select control, but
-it hasn't been seen in the wild and is thus not supported.
-
-Signed-off-by: Bert Vermeulen <bert@biot.com>
-Link: https://lore.kernel.org/r/20210120135928.246054-3-bert@biot.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/Makefile          |   1 +
- drivers/spi/spi-realtek-rtl.c | 209 ++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 210 insertions(+)
- create mode 100644 drivers/spi/spi-realtek-rtl.c
-
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -94,6 +94,7 @@ obj-$(CONFIG_SPI_QCOM_QSPI)		+= spi-qcom
- obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
- obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
- obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
-+obj-$(CONFIG_MACH_REALTEK_RTL)		+= spi-realtek-rtl.o
- obj-$(CONFIG_SPI_RPCIF)			+= spi-rpc-if.o
- obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
- obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
---- /dev/null
-+++ b/drivers/spi/spi-realtek-rtl.c
-@@ -0,0 +1,209 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/spi/spi.h>
-+
-+struct rtspi {
-+	void __iomem *base;
-+};
-+
-+/* SPI Flash Configuration Register */
-+#define RTL_SPI_SFCR			0x00
-+#define RTL_SPI_SFCR_RBO		BIT(28)
-+#define RTL_SPI_SFCR_WBO		BIT(27)
-+
-+/* SPI Flash Control and Status Register */
-+#define RTL_SPI_SFCSR			0x08
-+#define RTL_SPI_SFCSR_CSB0		BIT(31)
-+#define RTL_SPI_SFCSR_CSB1		BIT(30)
-+#define RTL_SPI_SFCSR_RDY		BIT(27)
-+#define RTL_SPI_SFCSR_CS		BIT(24)
-+#define RTL_SPI_SFCSR_LEN_MASK		~(0x03 << 28)
-+#define RTL_SPI_SFCSR_LEN1		(0x00 << 28)
-+#define RTL_SPI_SFCSR_LEN4		(0x03 << 28)
-+
-+/* SPI Flash Data Register */
-+#define RTL_SPI_SFDR			0x0c
-+
-+#define REG(x)		(rtspi->base + x)
-+
-+
-+static void rt_set_cs(struct spi_device *spi, bool active)
-+{
-+	struct rtspi *rtspi = spi_controller_get_devdata(spi->controller);
-+	u32 value;
-+
-+	/* CS0 bit is active low */
-+	value = readl(REG(RTL_SPI_SFCSR));
-+	if (active)
-+		value |= RTL_SPI_SFCSR_CSB0;
-+	else
-+		value &= ~RTL_SPI_SFCSR_CSB0;
-+	writel(value, REG(RTL_SPI_SFCSR));
-+}
-+
-+static void set_size(struct rtspi *rtspi, int size)
-+{
-+	u32 value;
-+
-+	value = readl(REG(RTL_SPI_SFCSR));
-+	value &= RTL_SPI_SFCSR_LEN_MASK;
-+	if (size == 4)
-+		value |= RTL_SPI_SFCSR_LEN4;
-+	else if (size == 1)
-+		value |= RTL_SPI_SFCSR_LEN1;
-+	writel(value, REG(RTL_SPI_SFCSR));
-+}
-+
-+static inline void wait_ready(struct rtspi *rtspi)
-+{
-+	while (!(readl(REG(RTL_SPI_SFCSR)) & RTL_SPI_SFCSR_RDY))
-+		cpu_relax();
-+}
-+static void send4(struct rtspi *rtspi, const u32 *buf)
-+{
-+	wait_ready(rtspi);
-+	set_size(rtspi, 4);
-+	writel(*buf, REG(RTL_SPI_SFDR));
-+}
-+
-+static void send1(struct rtspi *rtspi, const u8 *buf)
-+{
-+	wait_ready(rtspi);
-+	set_size(rtspi, 1);
-+	writel(buf[0] << 24, REG(RTL_SPI_SFDR));
-+}
-+
-+static void rcv4(struct rtspi *rtspi, u32 *buf)
-+{
-+	wait_ready(rtspi);
-+	set_size(rtspi, 4);
-+	*buf = readl(REG(RTL_SPI_SFDR));
-+}
-+
-+static void rcv1(struct rtspi *rtspi, u8 *buf)
-+{
-+	wait_ready(rtspi);
-+	set_size(rtspi, 1);
-+	*buf = readl(REG(RTL_SPI_SFDR)) >> 24;
-+}
-+
-+static int transfer_one(struct spi_controller *ctrl, struct spi_device *spi,
-+			struct spi_transfer *xfer)
-+{
-+	struct rtspi *rtspi = spi_controller_get_devdata(ctrl);
-+	void *rx_buf;
-+	const void *tx_buf;
-+	int cnt;
-+
-+	tx_buf = xfer->tx_buf;
-+	rx_buf = xfer->rx_buf;
-+	cnt = xfer->len;
-+	if (tx_buf) {
-+		while (cnt >= 4) {
-+			send4(rtspi, tx_buf);
-+			tx_buf += 4;
-+			cnt -= 4;
-+		}
-+		while (cnt) {
-+			send1(rtspi, tx_buf);
-+			tx_buf++;
-+			cnt--;
-+		}
-+	} else if (rx_buf) {
-+		while (cnt >= 4) {
-+			rcv4(rtspi, rx_buf);
-+			rx_buf += 4;
-+			cnt -= 4;
-+		}
-+		while (cnt) {
-+			rcv1(rtspi, rx_buf);
-+			rx_buf++;
-+			cnt--;
-+		}
-+	}
-+
-+	spi_finalize_current_transfer(ctrl);
-+
-+	return 0;
-+}
-+
-+static void init_hw(struct rtspi *rtspi)
-+{
-+	u32 value;
-+
-+	/* Turn on big-endian byte ordering */
-+	value = readl(REG(RTL_SPI_SFCR));
-+	value |= RTL_SPI_SFCR_RBO | RTL_SPI_SFCR_WBO;
-+	writel(value, REG(RTL_SPI_SFCR));
-+
-+	value = readl(REG(RTL_SPI_SFCSR));
-+	/* Permanently disable CS1, since it's never used */
-+	value |= RTL_SPI_SFCSR_CSB1;
-+	/* Select CS0 for use */
-+	value &= RTL_SPI_SFCSR_CS;
-+	writel(value, REG(RTL_SPI_SFCSR));
-+}
-+
-+static int realtek_rtl_spi_probe(struct platform_device *pdev)
-+{
-+	struct spi_controller *ctrl;
-+	struct rtspi *rtspi;
-+	int err;
-+
-+	ctrl = devm_spi_alloc_master(&pdev->dev, sizeof(*rtspi));
-+	if (!ctrl) {
-+		dev_err(&pdev->dev, "Error allocating SPI controller\n");
-+		return -ENOMEM;
-+	}
-+	platform_set_drvdata(pdev, ctrl);
-+	rtspi = spi_controller_get_devdata(ctrl);
-+
-+	rtspi->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
-+	if (IS_ERR(rtspi->base)) {
-+		dev_err(&pdev->dev, "Could not map SPI register address");
-+		return -ENOMEM;
-+	}
-+
-+	init_hw(rtspi);
-+
-+	ctrl->dev.of_node = pdev->dev.of_node;
-+	ctrl->flags = SPI_CONTROLLER_HALF_DUPLEX;
-+	ctrl->set_cs = rt_set_cs;
-+	ctrl->transfer_one = transfer_one;
-+
-+	err = devm_spi_register_controller(&pdev->dev, ctrl);
-+	if (err) {
-+		dev_err(&pdev->dev, "Could not register SPI controller\n");
-+		return -ENODEV;
-+	}
-+
-+	return 0;
-+}
-+
-+
-+static const struct of_device_id realtek_rtl_spi_of_ids[] = {
-+	{ .compatible = "realtek,rtl8380-spi" },
-+	{ .compatible = "realtek,rtl8382-spi" },
-+	{ .compatible = "realtek,rtl8391-spi" },
-+	{ .compatible = "realtek,rtl8392-spi" },
-+	{ .compatible = "realtek,rtl8393-spi" },
-+	{ /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, realtek_rtl_spi_of_ids);
-+
-+static struct platform_driver realtek_rtl_spi_driver = {
-+	.probe = realtek_rtl_spi_probe,
-+	.driver = {
-+		.name = "realtek-rtl-spi",
-+		.of_match_table = realtek_rtl_spi_of_ids,
-+	},
-+};
-+
-+module_platform_driver(realtek_rtl_spi_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Bert Vermeulen <bert@biot.com>");
-+MODULE_DESCRIPTION("Realtek RTL SPI driver");
diff --git a/target/linux/realtek/patches-5.10/005-5.12-dt-bindings-interrupt-controller-add-realtek-rtl838x-rtl839x-support.patch b/target/linux/realtek/patches-5.10/005-5.12-dt-bindings-interrupt-controller-add-realtek-rtl838x-rtl839x-support.patch
deleted file mode 100644
index 165545a22077..000000000000
--- a/target/linux/realtek/patches-5.10/005-5.12-dt-bindings-interrupt-controller-add-realtek-rtl838x-rtl839x-support.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 4a2b92a5d3519fc2c1edda4d4aa0e05bff41e8de Mon Sep 17 00:00:00 2001
-From: Bert Vermeulen <bert@biot.com>
-Date: Fri, 22 Jan 2021 21:42:23 +0100
-Subject: dt-bindings: interrupt-controller: Add Realtek RTL838x/RTL839x
- support
-
-Document the binding for the Realtek RTL838x/RTL839x interrupt controller.
-
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Bert Vermeulen <bert@biot.com>
-[maz: Add a commit message, as the author couldn't be bothered...]
-Signed-off-by: Marc Zyngier <maz@kernel.org>
-Link: https://lore.kernel.org/r/20210122204224.509124-2-bert@biot.com
----
- .../interrupt-controller/realtek,rtl-intc.yaml     | 57 ++++++++++++++++++++++
- 1 file changed, 57 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
-@@ -0,0 +1,57 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/interrupt-controller/realtek,rtl-intc.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Realtek RTL SoC interrupt controller devicetree bindings
-+
-+maintainers:
-+  - Birger Koblitz <mail@birger-koblitz.de>
-+  - Bert Vermeulen <bert@biot.com>
-+  - John Crispin <john@phrozen.org>
-+
-+properties:
-+  compatible:
-+    const: realtek,rtl-intc
-+
-+  "#interrupt-cells":
-+    const: 1
-+
-+  reg:
-+    maxItems: 1
-+
-+  interrupts:
-+    maxItems: 1
-+
-+  interrupt-controller: true
-+
-+  "#address-cells":
-+    const: 0
-+
-+  interrupt-map:
-+    description: Describes mapping from SoC interrupts to CPU interrupts
-+
-+required:
-+  - compatible
-+  - reg
-+  - "#interrupt-cells"
-+  - interrupt-controller
-+  - "#address-cells"
-+  - interrupt-map
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    intc: interrupt-controller@3000 {
-+      compatible = "realtek,rtl-intc";
-+      #interrupt-cells = <1>;
-+      interrupt-controller;
-+      reg = <0x3000 0x20>;
-+      #address-cells = <0>;
-+      interrupt-map =
-+              <31 &cpuintc 2>,
-+              <30 &cpuintc 1>,
-+              <29 &cpuintc 5>;
-+    };
diff --git a/target/linux/realtek/patches-5.10/006-5.12-irqchip-add-support-for-realtek-rtl838x-rtl839x-interrupt-controller.patch b/target/linux/realtek/patches-5.10/006-5.12-irqchip-add-support-for-realtek-rtl838x-rtl839x-interrupt-controller.patch
deleted file mode 100644
index 753c41eb2f9a..000000000000
--- a/target/linux/realtek/patches-5.10/006-5.12-irqchip-add-support-for-realtek-rtl838x-rtl839x-interrupt-controller.patch
+++ /dev/null
@@ -1,211 +0,0 @@
-From 9f3a0f34b84ad1b9a8f2bdae44b66f16685b2143 Mon Sep 17 00:00:00 2001
-From: Bert Vermeulen <bert@biot.com>
-Date: Fri, 22 Jan 2021 21:42:24 +0100
-Subject: irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller
-
-This is a standard IRQ driver with only status and mask registers.
-
-The mapping from SoC interrupts (18-31) to MIPS core interrupts is
-done via an interrupt-map in device tree.
-
-Signed-off-by: Bert Vermeulen <bert@biot.com>
-Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
-Acked-by: John Crispin <john@phrozen.org>
-Signed-off-by: Marc Zyngier <maz@kernel.org>
-Link: https://lore.kernel.org/r/20210122204224.509124-3-bert@biot.com
----
- drivers/irqchip/Makefile          |   1 +
- drivers/irqchip/irq-realtek-rtl.c | 180 ++++++++++++++++++++++++++++++++++++++
- 2 files changed, 181 insertions(+)
- create mode 100644 drivers/irqchip/irq-realtek-rtl.c
-
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -114,3 +114,4 @@ obj-$(CONFIG_LOONGSON_PCH_PIC)		+= irq-l
- obj-$(CONFIG_LOONGSON_PCH_MSI)		+= irq-loongson-pch-msi.o
- obj-$(CONFIG_MST_IRQ)			+= irq-mst-intc.o
- obj-$(CONFIG_SL28CPLD_INTC)		+= irq-sl28cpld.o
-+obj-$(CONFIG_MACH_REALTEK_RTL)		+= irq-realtek-rtl.o
---- /dev/null
-+++ b/drivers/irqchip/irq-realtek-rtl.c
-@@ -0,0 +1,180 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2020 Birger Koblitz <mail@birger-koblitz.de>
-+ * Copyright (C) 2020 Bert Vermeulen <bert@biot.com>
-+ * Copyright (C) 2020 John Crispin <john@phrozen.org>
-+ */
-+
-+#include <linux/of_irq.h>
-+#include <linux/irqchip.h>
-+#include <linux/spinlock.h>
-+#include <linux/of_address.h>
-+#include <linux/irqchip/chained_irq.h>
-+
-+/* Global Interrupt Mask Register */
-+#define RTL_ICTL_GIMR		0x00
-+/* Global Interrupt Status Register */
-+#define RTL_ICTL_GISR		0x04
-+/* Interrupt Routing Registers */
-+#define RTL_ICTL_IRR0		0x08
-+#define RTL_ICTL_IRR1		0x0c
-+#define RTL_ICTL_IRR2		0x10
-+#define RTL_ICTL_IRR3		0x14
-+
-+#define REG(x)		(realtek_ictl_base + x)
-+
-+static DEFINE_RAW_SPINLOCK(irq_lock);
-+static void __iomem *realtek_ictl_base;
-+
-+static void realtek_ictl_unmask_irq(struct irq_data *i)
-+{
-+	unsigned long flags;
-+	u32 value;
-+
-+	raw_spin_lock_irqsave(&irq_lock, flags);
-+
-+	value = readl(REG(RTL_ICTL_GIMR));
-+	value |= BIT(i->hwirq);
-+	writel(value, REG(RTL_ICTL_GIMR));
-+
-+	raw_spin_unlock_irqrestore(&irq_lock, flags);
-+}
-+
-+static void realtek_ictl_mask_irq(struct irq_data *i)
-+{
-+	unsigned long flags;
-+	u32 value;
-+
-+	raw_spin_lock_irqsave(&irq_lock, flags);
-+
-+	value = readl(REG(RTL_ICTL_GIMR));
-+	value &= ~BIT(i->hwirq);
-+	writel(value, REG(RTL_ICTL_GIMR));
-+
-+	raw_spin_unlock_irqrestore(&irq_lock, flags);
-+}
-+
-+static struct irq_chip realtek_ictl_irq = {
-+	.name = "realtek-rtl-intc",
-+	.irq_mask = realtek_ictl_mask_irq,
-+	.irq_unmask = realtek_ictl_unmask_irq,
-+};
-+
-+static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+	irq_set_chip_and_handler(hw, &realtek_ictl_irq, handle_level_irq);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops irq_domain_ops = {
-+	.map = intc_map,
-+	.xlate = irq_domain_xlate_onecell,
-+};
-+
-+static void realtek_irq_dispatch(struct irq_desc *desc)
-+{
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	struct irq_domain *domain;
-+	unsigned int pending;
-+
-+	chained_irq_enter(chip, desc);
-+	pending = readl(REG(RTL_ICTL_GIMR)) & readl(REG(RTL_ICTL_GISR));
-+	if (unlikely(!pending)) {
-+		spurious_interrupt();
-+		goto out;
-+	}
-+	domain = irq_desc_get_handler_data(desc);
-+	generic_handle_irq(irq_find_mapping(domain, __ffs(pending)));
-+
-+out:
-+	chained_irq_exit(chip, desc);
-+}
-+
-+/*
-+ * SoC interrupts are cascaded to MIPS CPU interrupts according to the
-+ * interrupt-map in the device tree. Each SoC interrupt gets 4 bits for
-+ * the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts
-+ * thus go into 4 IRRs.
-+ */
-+static int __init map_interrupts(struct device_node *node, struct irq_domain *domain)
-+{
-+	struct device_node *cpu_ictl;
-+	const __be32 *imap;
-+	u32 imaplen, soc_int, cpu_int, tmp, regs[4];
-+	int ret, i, irr_regs[] = {
-+		RTL_ICTL_IRR3,
-+		RTL_ICTL_IRR2,
-+		RTL_ICTL_IRR1,
-+		RTL_ICTL_IRR0,
-+	};
-+	u8 mips_irqs_set;
-+
-+	ret = of_property_read_u32(node, "#address-cells", &tmp);
-+	if (ret || tmp)
-+		return -EINVAL;
-+
-+	imap = of_get_property(node, "interrupt-map", &imaplen);
-+	if (!imap || imaplen % 3)
-+		return -EINVAL;
-+
-+	mips_irqs_set = 0;
-+	memset(regs, 0, sizeof(regs));
-+	for (i = 0; i < imaplen; i += 3 * sizeof(u32)) {
-+		soc_int = be32_to_cpup(imap);
-+		if (soc_int > 31)
-+			return -EINVAL;
-+
-+		cpu_ictl = of_find_node_by_phandle(be32_to_cpup(imap + 1));
-+		if (!cpu_ictl)
-+			return -EINVAL;
-+		ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp);
-+		if (ret || tmp != 1)
-+			return -EINVAL;
-+		of_node_put(cpu_ictl);
-+
-+		cpu_int = be32_to_cpup(imap + 2);
-+		if (cpu_int > 7)
-+			return -EINVAL;
-+
-+		if (!(mips_irqs_set & BIT(cpu_int))) {
-+			irq_set_chained_handler_and_data(cpu_int, realtek_irq_dispatch,
-+							 domain);
-+			mips_irqs_set |= BIT(cpu_int);
-+		}
-+
-+		regs[(soc_int * 4) / 32] |= cpu_int << (soc_int * 4) % 32;
-+		imap += 3;
-+	}
-+
-+	for (i = 0; i < 4; i++)
-+		writel(regs[i], REG(irr_regs[i]));
-+
-+	return 0;
-+}
-+
-+static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent)
-+{
-+	struct irq_domain *domain;
-+	int ret;
-+
-+	realtek_ictl_base = of_iomap(node, 0);
-+	if (!realtek_ictl_base)
-+		return -ENXIO;
-+
-+	/* Disable all cascaded interrupts */
-+	writel(0, REG(RTL_ICTL_GIMR));
-+
-+	domain = irq_domain_add_simple(node, 32, 0,
-+				       &irq_domain_ops, NULL);
-+
-+	ret = map_interrupts(node, domain);
-+	if (ret) {
-+		pr_err("invalid interrupt map\n");
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+IRQCHIP_DECLARE(realtek_rtl_intc, "realtek,rtl-intc", realtek_rtl_of_init);
diff --git a/target/linux/realtek/patches-5.10/007-5.16-gpio-realtek-realtek-otto-fix-gpio-line-irq-offset.patch b/target/linux/realtek/patches-5.10/007-5.16-gpio-realtek-realtek-otto-fix-gpio-line-irq-offset.patch
deleted file mode 100644
index 9935c5725733..000000000000
--- a/target/linux/realtek/patches-5.10/007-5.16-gpio-realtek-realtek-otto-fix-gpio-line-irq-offset.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Sander Vanheule <sander@svanheule.net>
-Subject: gpio: realtek-otto: fix GPIO line IRQ offset
-
-The irqchip uses one domain for all GPIO lines, so th line offset should be
-determined w.r.t. the first line of the first port, not the first line of the
-triggered port.
-
-Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support")
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-Link: https://lore.kernel.org/linux-gpio/20211028085243.34360-1-sander@svanheule.net/
-
---- a/drivers/gpio/gpio-realtek-otto.c
-+++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -206,7 +206,7 @@ static void realtek_gpio_irq_handler(str
- 		status = realtek_gpio_read_isr(ctrl, lines_done / 8);
- 		port_pin_count = min(gc->ngpio - lines_done, 8U);
- 		for_each_set_bit(offset, &status, port_pin_count) {
--			irq = irq_find_mapping(gc->irq.domain, offset);
-+			irq = irq_find_mapping(gc->irq.domain, offset + lines_done);
- 			generic_handle_irq(irq);
- 		}
- 	}
diff --git a/target/linux/realtek/patches-5.10/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch b/target/linux/realtek/patches-5.10/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch
deleted file mode 100644
index cf93d28f0a17..000000000000
--- a/target/linux/realtek/patches-5.10/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch
+++ /dev/null
@@ -1,467 +0,0 @@
-From 293903b9dfe43520f01374dc1661be11d6838c49 Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Thu, 18 Nov 2021 17:29:52 +0100
-Subject: watchdog: Add Realtek Otto watchdog timer
-
-Realtek MIPS SoCs (platform name Otto) have a watchdog timer with
-pretimeout notifitication support. The WDT can (partially) hard reset,
-or soft reset the SoC.
-
-This driver implements all features as described in the devicetree
-binding, except the phase2 interrupt, and also functions as a restart
-handler. The cpu reset mode is considered to be a "warm" restart, since
-this mode does not reset all peripherals. Being an embedded system
-though, the "cpu" and "software" modes will still cause the bootloader
-to run on restart.
-
-It is not known how a forced system reset can be disabled on the
-supported platforms. This means that the phase2 interrupt will only fire
-at the same time as reset, so implementing phase2 is of little use.
-
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Link: https://lore.kernel.org/r/6d060bccbdcc709cfa79203485db85aad3c3beb5.1637252610.git.sander@svanheule.net
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
----
- MAINTAINERS                         |   7 +
- drivers/watchdog/Kconfig            |  13 ++
- drivers/watchdog/Makefile           |   1 +
- drivers/watchdog/realtek_otto_wdt.c | 384 ++++++++++++++++++++++++++++++++++++
- 4 files changed, 405 insertions(+)
- create mode 100644 drivers/watchdog/realtek_otto_wdt.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -14824,6 +14824,13 @@ S:	Maintained
- F:	include/sound/rt*.h
- F:	sound/soc/codecs/rt*
- 
-+REALTEK OTTO WATCHDOG
-+M:	Sander Vanheule <sander@svanheule.net>
-+L:	linux-watchdog@vger.kernel.org
-+S:	Maintained
-+F:	Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml
-+F:	driver/watchdog/realtek_otto_wdt.c
-+
- REALTEK RTL83xx SMI DSA ROUTER CHIPS
- M:	Linus Walleij <linus.walleij@linaro.org>
- S:	Maintained
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -995,6 +995,19 @@ config RTD119X_WATCHDOG
- 	  Say Y here to include support for the watchdog timer in
- 	  Realtek RTD1295 SoCs.
- 
-+config REALTEK_OTTO_WDT
-+	tristate "Realtek Otto MIPS watchdog support"
-+	depends on MACH_REALTEK_RTL || COMPILE_TEST
-+	depends on COMMON_CLK
-+	select WATCHDOG_CORE
-+	default MACH_REALTEK_RTL
-+	help
-+	  Say Y here to include support for the watchdog timer on Realtek
-+	  RTL838x, RTL839x, RTL930x SoCs. This watchdog has pretimeout
-+	  notifications and system reset on timeout.
-+
-+	  When built as a module this will be called realtek_otto_wdt.
-+
- config SPRD_WATCHDOG
- 	tristate "Spreadtrum watchdog support"
- 	depends on ARCH_SPRD || COMPILE_TEST
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -174,6 +174,7 @@ obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
- obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
- obj-$(CONFIG_PIC32_WDT) += pic32-wdt.o
- obj-$(CONFIG_PIC32_DMT) += pic32-dmt.o
-+obj-$(CONFIG_REALTEK_OTTO_WDT) += realtek_otto_wdt.o
- 
- # PARISC Architecture
- 
---- /dev/null
-+++ b/drivers/watchdog/realtek_otto_wdt.c
-@@ -0,0 +1,384 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+
-+/*
-+ * Realtek Otto MIPS platform watchdog
-+ *
-+ * Watchdog timer that will reset the system after timeout, using the selected
-+ * reset mode.
-+ *
-+ * Counter scaling and timeouts:
-+ * - Base prescale of (2 << 25), providing tick duration T_0: 168ms @ 200MHz
-+ * - PRESCALE: logarithmic prescaler adding a factor of {1, 2, 4, 8}
-+ * - Phase 1: Times out after (PHASE1 + 1) × PRESCALE × T_0
-+ *   Generates an interrupt, WDT cannot be stopped after phase 1
-+ * - Phase 2: starts after phase 1, times out after (PHASE2 + 1) × PRESCALE × T_0
-+ *   Resets the system according to RST_MODE
-+ */
-+
-+#include <linux/bits.h>
-+#include <linux/bitfield.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/math.h>
-+#include <linux/minmax.h>
-+#include <linux/module.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/platform_device.h>
-+#include <linux/property.h>
-+#include <linux/reboot.h>
-+#include <linux/watchdog.h>
-+
-+#define OTTO_WDT_REG_CNTR		0x0
-+#define OTTO_WDT_CNTR_PING		BIT(31)
-+
-+#define OTTO_WDT_REG_INTR		0x4
-+#define OTTO_WDT_INTR_PHASE_1		BIT(31)
-+#define OTTO_WDT_INTR_PHASE_2		BIT(30)
-+
-+#define OTTO_WDT_REG_CTRL		0x8
-+#define OTTO_WDT_CTRL_ENABLE		BIT(31)
-+#define OTTO_WDT_CTRL_PRESCALE		GENMASK(30, 29)
-+#define OTTO_WDT_CTRL_PHASE1		GENMASK(26, 22)
-+#define OTTO_WDT_CTRL_PHASE2		GENMASK(19, 15)
-+#define OTTO_WDT_CTRL_RST_MODE		GENMASK(1, 0)
-+#define OTTO_WDT_MODE_SOC		0
-+#define OTTO_WDT_MODE_CPU		1
-+#define OTTO_WDT_MODE_SOFTWARE		2
-+#define OTTO_WDT_CTRL_DEFAULT		OTTO_WDT_MODE_CPU
-+
-+#define OTTO_WDT_PRESCALE_MAX		3
-+
-+/*
-+ * One higher than the max values contained in PHASE{1,2}, since a value of 0
-+ * corresponds to one tick.
-+ */
-+#define OTTO_WDT_PHASE_TICKS_MAX	32
-+
-+/*
-+ * The maximum reset delay is actually 2×32 ticks, but that would require large
-+ * pretimeout values for timeouts longer than 32 ticks. Limit the maximum timeout
-+ * to 32 + 1 to ensure small pretimeout values can be configured as expected.
-+ */
-+#define OTTO_WDT_TIMEOUT_TICKS_MAX	(OTTO_WDT_PHASE_TICKS_MAX + 1)
-+
-+struct otto_wdt_ctrl {
-+	struct watchdog_device wdev;
-+	struct device *dev;
-+	void __iomem *base;
-+	unsigned int clk_rate_khz;
-+	int irq_phase1;
-+};
-+
-+static int otto_wdt_start(struct watchdog_device *wdev)
-+{
-+	struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev);
-+	u32 v;
-+
-+	v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL);
-+	v |= OTTO_WDT_CTRL_ENABLE;
-+	iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL);
-+
-+	return 0;
-+}
-+
-+static int otto_wdt_stop(struct watchdog_device *wdev)
-+{
-+	struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev);
-+	u32 v;
-+
-+	v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL);
-+	v &= ~OTTO_WDT_CTRL_ENABLE;
-+	iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL);
-+
-+	return 0;
-+}
-+
-+static int otto_wdt_ping(struct watchdog_device *wdev)
-+{
-+	struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev);
-+
-+	iowrite32(OTTO_WDT_CNTR_PING, ctrl->base + OTTO_WDT_REG_CNTR);
-+
-+	return 0;
-+}
-+
-+static int otto_wdt_tick_ms(struct otto_wdt_ctrl *ctrl, int prescale)
-+{
-+	return DIV_ROUND_CLOSEST(1 << (25 + prescale), ctrl->clk_rate_khz);
-+}
-+
-+/*
-+ * The timer asserts the PHASE1/PHASE2 IRQs when the number of ticks exceeds
-+ * the value stored in those fields. This means each phase will run for at least
-+ * one tick, so small values need to be clamped to correctly reflect the timeout.
-+ */
-+static inline unsigned int div_round_ticks(unsigned int val, unsigned int tick_duration,
-+		unsigned int min_ticks)
-+{
-+	return max(min_ticks, DIV_ROUND_UP(val, tick_duration));
-+}
-+
-+static int otto_wdt_determine_timeouts(struct watchdog_device *wdev, unsigned int timeout,
-+		unsigned int pretimeout)
-+{
-+	struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev);
-+	unsigned int pretimeout_ms = pretimeout * 1000;
-+	unsigned int timeout_ms = timeout * 1000;
-+	unsigned int prescale_next = 0;
-+	unsigned int phase1_ticks;
-+	unsigned int phase2_ticks;
-+	unsigned int total_ticks;
-+	unsigned int prescale;
-+	unsigned int tick_ms;
-+	u32 v;
-+
-+	do {
-+		prescale = prescale_next;
-+		if (prescale > OTTO_WDT_PRESCALE_MAX)
-+			return -EINVAL;
-+
-+		tick_ms = otto_wdt_tick_ms(ctrl, prescale);
-+		total_ticks = div_round_ticks(timeout_ms, tick_ms, 2);
-+		phase1_ticks = div_round_ticks(timeout_ms - pretimeout_ms, tick_ms, 1);
-+		phase2_ticks = total_ticks - phase1_ticks;
-+
-+		prescale_next++;
-+	} while (phase1_ticks > OTTO_WDT_PHASE_TICKS_MAX
-+		|| phase2_ticks > OTTO_WDT_PHASE_TICKS_MAX);
-+
-+	v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL);
-+
-+	v &= ~(OTTO_WDT_CTRL_PRESCALE | OTTO_WDT_CTRL_PHASE1 | OTTO_WDT_CTRL_PHASE2);
-+	v |= FIELD_PREP(OTTO_WDT_CTRL_PHASE1, phase1_ticks - 1);
-+	v |= FIELD_PREP(OTTO_WDT_CTRL_PHASE2, phase2_ticks - 1);
-+	v |= FIELD_PREP(OTTO_WDT_CTRL_PRESCALE, prescale);
-+
-+	iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL);
-+
-+	timeout_ms = total_ticks * tick_ms;
-+	ctrl->wdev.timeout = timeout_ms / 1000;
-+
-+	pretimeout_ms = phase2_ticks * tick_ms;
-+	ctrl->wdev.pretimeout = pretimeout_ms / 1000;
-+
-+	return 0;
-+}
-+
-+static int otto_wdt_set_timeout(struct watchdog_device *wdev, unsigned int val)
-+{
-+	return otto_wdt_determine_timeouts(wdev, val, min(wdev->pretimeout, val - 1));
-+}
-+
-+static int otto_wdt_set_pretimeout(struct watchdog_device *wdev, unsigned int val)
-+{
-+	return otto_wdt_determine_timeouts(wdev, wdev->timeout, val);
-+}
-+
-+static int otto_wdt_restart(struct watchdog_device *wdev, unsigned long reboot_mode,
-+		void *data)
-+{
-+	struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev);
-+	u32 reset_mode;
-+	u32 v;
-+
-+	disable_irq(ctrl->irq_phase1);
-+
-+	switch (reboot_mode) {
-+	case REBOOT_SOFT:
-+		reset_mode = OTTO_WDT_MODE_SOFTWARE;
-+		break;
-+	case REBOOT_WARM:
-+		reset_mode = OTTO_WDT_MODE_CPU;
-+		break;
-+	default:
-+		reset_mode = OTTO_WDT_MODE_SOC;
-+		break;
-+	}
-+
-+	/* Configure for shortest timeout and wait for reset to occur */
-+	v = FIELD_PREP(OTTO_WDT_CTRL_RST_MODE, reset_mode) | OTTO_WDT_CTRL_ENABLE;
-+	iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL);
-+
-+	mdelay(3 * otto_wdt_tick_ms(ctrl, 0));
-+
-+	return 0;
-+}
-+
-+static irqreturn_t otto_wdt_phase1_isr(int irq, void *dev_id)
-+{
-+	struct otto_wdt_ctrl *ctrl = dev_id;
-+
-+	iowrite32(OTTO_WDT_INTR_PHASE_1, ctrl->base + OTTO_WDT_REG_INTR);
-+	dev_crit(ctrl->dev, "phase 1 timeout\n");
-+	watchdog_notify_pretimeout(&ctrl->wdev);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static const struct watchdog_ops otto_wdt_ops = {
-+	.owner = THIS_MODULE,
-+	.start = otto_wdt_start,
-+	.stop = otto_wdt_stop,
-+	.ping = otto_wdt_ping,
-+	.set_timeout = otto_wdt_set_timeout,
-+	.set_pretimeout = otto_wdt_set_pretimeout,
-+	.restart = otto_wdt_restart,
-+};
-+
-+static const struct watchdog_info otto_wdt_info = {
-+	.identity = "Realtek Otto watchdog timer",
-+	.options = WDIOF_KEEPALIVEPING |
-+		WDIOF_MAGICCLOSE |
-+		WDIOF_SETTIMEOUT |
-+		WDIOF_PRETIMEOUT,
-+};
-+
-+static void otto_wdt_clock_action(void *data)
-+{
-+	clk_disable_unprepare(data);
-+}
-+
-+static int otto_wdt_probe_clk(struct otto_wdt_ctrl *ctrl)
-+{
-+	struct clk *clk = devm_clk_get(ctrl->dev, NULL);
-+	int ret;
-+
-+	if (IS_ERR(clk))
-+		return dev_err_probe(ctrl->dev, PTR_ERR(clk), "Failed to get clock\n");
-+
-+	ret = clk_prepare_enable(clk);
-+	if (ret)
-+		return dev_err_probe(ctrl->dev, ret, "Failed to enable clock\n");
-+
-+	ret = devm_add_action_or_reset(ctrl->dev, otto_wdt_clock_action, clk);
-+	if (ret)
-+		return ret;
-+
-+	ctrl->clk_rate_khz = clk_get_rate(clk) / 1000;
-+	if (ctrl->clk_rate_khz == 0)
-+		return dev_err_probe(ctrl->dev, -ENXIO, "Failed to get clock rate\n");
-+
-+	return 0;
-+}
-+
-+static int otto_wdt_probe_reset_mode(struct otto_wdt_ctrl *ctrl)
-+{
-+	static const char *mode_property = "realtek,reset-mode";
-+	const struct fwnode_handle *node = ctrl->dev->fwnode;
-+	int mode_count;
-+	u32 mode;
-+	u32 v;
-+
-+	if (!node)
-+		return -ENXIO;
-+
-+	mode_count = fwnode_property_string_array_count(node, mode_property);
-+	if (mode_count < 0)
-+		return mode_count;
-+	else if (mode_count == 0)
-+		return 0;
-+	else if (mode_count != 1)
-+		return -EINVAL;
-+
-+	if (fwnode_property_match_string(node, mode_property, "soc") == 0)
-+		mode = OTTO_WDT_MODE_SOC;
-+	else if (fwnode_property_match_string(node, mode_property, "cpu") == 0)
-+		mode = OTTO_WDT_MODE_CPU;
-+	else if (fwnode_property_match_string(node, mode_property, "software") == 0)
-+		mode = OTTO_WDT_MODE_SOFTWARE;
-+	else
-+		return -EINVAL;
-+
-+	v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL);
-+	v &= ~OTTO_WDT_CTRL_RST_MODE;
-+	v |= FIELD_PREP(OTTO_WDT_CTRL_RST_MODE, mode);
-+	iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL);
-+
-+	return 0;
-+}
-+
-+static int otto_wdt_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct otto_wdt_ctrl *ctrl;
-+	unsigned int max_tick_ms;
-+	int ret;
-+
-+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
-+	if (!ctrl)
-+		return -ENOMEM;
-+
-+	ctrl->dev = dev;
-+	ctrl->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(ctrl->base))
-+		return PTR_ERR(ctrl->base);
-+
-+	/* Clear any old interrupts and reset initial state */
-+	iowrite32(OTTO_WDT_INTR_PHASE_1 | OTTO_WDT_INTR_PHASE_2,
-+			ctrl->base + OTTO_WDT_REG_INTR);
-+	iowrite32(OTTO_WDT_CTRL_DEFAULT, ctrl->base + OTTO_WDT_REG_CTRL);
-+
-+	ret = otto_wdt_probe_clk(ctrl);
-+	if (ret)
-+		return ret;
-+
-+	ctrl->irq_phase1 = platform_get_irq_byname(pdev, "phase1");
-+	if (ctrl->irq_phase1 < 0)
-+		return ctrl->irq_phase1;
-+
-+	ret = devm_request_irq(dev, ctrl->irq_phase1, otto_wdt_phase1_isr, 0,
-+			"realtek-otto-wdt", ctrl);
-+	if (ret)
-+		return dev_err_probe(dev, ret, "Failed to get IRQ for phase1\n");
-+
-+	ret = otto_wdt_probe_reset_mode(ctrl);
-+	if (ret)
-+		return dev_err_probe(dev, ret, "Invalid reset mode specified\n");
-+
-+	ctrl->wdev.parent = dev;
-+	ctrl->wdev.info = &otto_wdt_info;
-+	ctrl->wdev.ops = &otto_wdt_ops;
-+
-+	/*
-+	 * Since pretimeout cannot be disabled, min. timeout is twice the
-+	 * subsystem resolution. Max. timeout is ca. 43s at a bus clock of 200MHz.
-+	 */
-+	ctrl->wdev.min_timeout = 2;
-+	max_tick_ms = otto_wdt_tick_ms(ctrl, OTTO_WDT_PRESCALE_MAX);
-+	ctrl->wdev.max_hw_heartbeat_ms = max_tick_ms * OTTO_WDT_TIMEOUT_TICKS_MAX;
-+	ctrl->wdev.timeout = min(30U, ctrl->wdev.max_hw_heartbeat_ms / 1000);
-+
-+	watchdog_set_drvdata(&ctrl->wdev, ctrl);
-+	watchdog_init_timeout(&ctrl->wdev, 0, dev);
-+	watchdog_stop_on_reboot(&ctrl->wdev);
-+	watchdog_set_restart_priority(&ctrl->wdev, 128);
-+
-+	ret = otto_wdt_determine_timeouts(&ctrl->wdev, ctrl->wdev.timeout, 1);
-+	if (ret)
-+		return dev_err_probe(dev, ret, "Failed to set timeout\n");
-+
-+	return devm_watchdog_register_device(dev, &ctrl->wdev);
-+}
-+
-+static const struct of_device_id otto_wdt_ids[] = {
-+	{ .compatible = "realtek,rtl8380-wdt" },
-+	{ .compatible = "realtek,rtl8390-wdt" },
-+	{ .compatible = "realtek,rtl9300-wdt" },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, otto_wdt_ids);
-+
-+static struct platform_driver otto_wdt_driver = {
-+	.probe = otto_wdt_probe,
-+	.driver = {
-+		.name = "realtek-otto-watchdog",
-+		.of_match_table	= otto_wdt_ids,
-+	},
-+};
-+module_platform_driver(otto_wdt_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Sander Vanheule <sander@svanheule.net>");
-+MODULE_DESCRIPTION("Realtek Otto watchdog timer driver");
diff --git a/target/linux/realtek/patches-5.10/020-v5.17-net-mdio-add-helpers-to-extract-clause-45-regad-and-.patch b/target/linux/realtek/patches-5.10/020-v5.17-net-mdio-add-helpers-to-extract-clause-45-regad-and-.patch
deleted file mode 100644
index ef2e225717e2..000000000000
--- a/target/linux/realtek/patches-5.10/020-v5.17-net-mdio-add-helpers-to-extract-clause-45-regad-and-.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From c6af53f038aa32cec12e8a305ba07c7ef168f1b0 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Tue, 4 Jan 2022 12:07:00 +0000
-Subject: [PATCH 2/3] net: mdio: add helpers to extract clause 45 regad and
- devad fields
-
-Add a couple of helpers and definitions to extract the clause 45 regad
-and devad fields from the regnum passed into MDIO drivers.
-
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/linux/mdio.h | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/include/linux/mdio.h
-+++ b/include/linux/mdio.h
-@@ -7,6 +7,7 @@
- #define __LINUX_MDIO_H__
- 
- #include <uapi/linux/mdio.h>
-+#include <linux/bitfield.h>
- #include <linux/mod_devicetable.h>
- 
- /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
-@@ -14,6 +15,7 @@
-  */
- #define MII_ADDR_C45		(1<<30)
- #define MII_DEVADDR_C45_SHIFT	16
-+#define MII_DEVADDR_C45_MASK	GENMASK(20, 16)
- #define MII_REGADDR_C45_MASK	GENMASK(15, 0)
- 
- struct gpio_desc;
-@@ -342,6 +344,16 @@ static inline u32 mdiobus_c45_addr(int d
- 	return MII_ADDR_C45 | devad << MII_DEVADDR_C45_SHIFT | regnum;
- }
- 
-+static inline u16 mdiobus_c45_regad(u32 regnum)
-+{
-+	return FIELD_GET(MII_REGADDR_C45_MASK, regnum);
-+}
-+
-+static inline u16 mdiobus_c45_devad(u32 regnum)
-+{
-+	return FIELD_GET(MII_DEVADDR_C45_MASK, regnum);
-+}
-+
- static inline int __mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad,
- 				     u16 regnum)
- {
diff --git a/target/linux/realtek/patches-5.10/021-v5.19-02-gpio-realtek-otto-Support-reversed-port-layouts.patch b/target/linux/realtek/patches-5.10/021-v5.19-02-gpio-realtek-otto-Support-reversed-port-layouts.patch
deleted file mode 100644
index 8f3535143888..000000000000
--- a/target/linux/realtek/patches-5.10/021-v5.19-02-gpio-realtek-otto-Support-reversed-port-layouts.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From 512c5be35223d9baa2629efa1084cf5210eaee80 Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Sat, 9 Apr 2022 21:55:47 +0200
-Subject: [PATCH 2/6] gpio: realtek-otto: Support reversed port layouts
-
-The GPIO port layout on the RTL930x SoC series is reversed compared to
-the RTL838x and RTL839x SoC series. Add new port offset calculator
-functions to ensure the correct order is used when reading port IRQ
-data, and ensure bgpio uses the right byte ordering.
-
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
----
- drivers/gpio/gpio-realtek-otto.c | 55 +++++++++++++++++++++++++++++---
- 1 file changed, 51 insertions(+), 4 deletions(-)
-
---- a/drivers/gpio/gpio-realtek-otto.c
-+++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -58,6 +58,8 @@ struct realtek_gpio_ctrl {
- 	raw_spinlock_t lock;
- 	u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
- 	u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
-+	unsigned int (*port_offset_u8)(unsigned int port);
-+	unsigned int (*port_offset_u16)(unsigned int port);
- };
- 
- /* Expand with more flags as devices with other quirks are added */
-@@ -69,6 +71,11 @@ enum realtek_gpio_flags {
- 	 * line the IRQ handler was assigned to, causing uncaught interrupts.
- 	 */
- 	GPIO_INTERRUPTS_DISABLED = BIT(0),
-+	/*
-+	 * Port order is reversed, meaning DCBA register layout for 1-bit
-+	 * fields, and [BA, DC] for 2-bit fields.
-+	 */
-+	GPIO_PORTS_REVERSED = BIT(1),
- };
- 
- static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
-@@ -86,21 +93,50 @@ static struct realtek_gpio_ctrl *irq_dat
-  * port. The two interrupt mask registers store two bits per GPIO, so use u16
-  * values.
-  */
-+static unsigned int realtek_gpio_port_offset_u8(unsigned int port)
-+{
-+	return port;
-+}
-+
-+static unsigned int realtek_gpio_port_offset_u16(unsigned int port)
-+{
-+	return 2 * port;
-+}
-+
-+/*
-+ * Reversed port order register access
-+ *
-+ * For registers with one bit per GPIO, all ports are stored as u8-s in one
-+ * register in reversed order. The two interrupt mask registers store two bits
-+ * per GPIO, so use u16 values. The first register contains ports 1 and 0, the
-+ * second ports 3 and 2.
-+ */
-+static unsigned int realtek_gpio_port_offset_u8_rev(unsigned int port)
-+{
-+	return 3 - port;
-+}
-+
-+static unsigned int realtek_gpio_port_offset_u16_rev(unsigned int port)
-+{
-+	return 2 * (port ^ 1);
-+}
-+
- static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl,
- 	unsigned int port, u16 irq_type, u16 irq_mask)
- {
--	iowrite16(irq_type & irq_mask, ctrl->base + REALTEK_GPIO_REG_IMR + 2 * port);
-+	iowrite16(irq_type & irq_mask,
-+		ctrl->base + REALTEK_GPIO_REG_IMR + ctrl->port_offset_u16(port));
- }
- 
- static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl,
- 	unsigned int port, u8 mask)
- {
--	iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + port);
-+	iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
- }
- 
- static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port)
- {
--	return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + port);
-+	return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
- }
- 
- /* Set the rising and falling edge mask bits for a GPIO port pin */
-@@ -253,6 +289,7 @@ MODULE_DEVICE_TABLE(of, realtek_gpio_of_
- static int realtek_gpio_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-+	unsigned long bgpio_flags;
- 	unsigned int dev_flags;
- 	struct gpio_irq_chip *girq;
- 	struct realtek_gpio_ctrl *ctrl;
-@@ -280,10 +317,20 @@ static int realtek_gpio_probe(struct pla
- 
- 	raw_spin_lock_init(&ctrl->lock);
- 
-+	if (dev_flags & GPIO_PORTS_REVERSED) {
-+		bgpio_flags = 0;
-+		ctrl->port_offset_u8 = realtek_gpio_port_offset_u8_rev;
-+		ctrl->port_offset_u16 = realtek_gpio_port_offset_u16_rev;
-+	} else {
-+		bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
-+		ctrl->port_offset_u8 = realtek_gpio_port_offset_u8;
-+		ctrl->port_offset_u16 = realtek_gpio_port_offset_u16;
-+	}
-+
- 	err = bgpio_init(&ctrl->gc, dev, 4,
- 		ctrl->base + REALTEK_GPIO_REG_DATA, NULL, NULL,
- 		ctrl->base + REALTEK_GPIO_REG_DIR, NULL,
--		BGPIOF_BIG_ENDIAN_BYTE_ORDER);
-+		bgpio_flags);
- 	if (err) {
- 		dev_err(dev, "unable to init generic GPIO");
- 		return err;
diff --git a/target/linux/realtek/patches-5.10/021-v5.19-03-gpio-realtek-otto-Support-per-cpu-interrupts.patch b/target/linux/realtek/patches-5.10/021-v5.19-03-gpio-realtek-otto-Support-per-cpu-interrupts.patch
deleted file mode 100644
index 8f5d571ea2f7..000000000000
--- a/target/linux/realtek/patches-5.10/021-v5.19-03-gpio-realtek-otto-Support-per-cpu-interrupts.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-From 95fa6dbe58f286a8f87cb37b7516232eb678de2d Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Sat, 9 Apr 2022 21:55:48 +0200
-Subject: [PATCH 3/6] gpio: realtek-otto: Support per-cpu interrupts
-
-On SoCs with multiple cores, it is possible that the GPIO interrupt
-controller supports assigning specific pins to one or more cores.
-
-IRQ balancing can be performed on a line-by-line basis if the parent
-interrupt is routed to all available cores, which is the default upon
-initialisation.
-
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
----
- drivers/gpio/gpio-realtek-otto.c | 75 +++++++++++++++++++++++++++++++-
- 1 file changed, 74 insertions(+), 1 deletion(-)
-
---- a/drivers/gpio/gpio-realtek-otto.c
-+++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -1,6 +1,7 @@
- // SPDX-License-Identifier: GPL-2.0-only
- 
- #include <linux/gpio/driver.h>
-+#include <linux/cpumask.h>
- #include <linux/irq.h>
- #include <linux/minmax.h>
- #include <linux/mod_devicetable.h>
-@@ -55,6 +56,8 @@
- struct realtek_gpio_ctrl {
- 	struct gpio_chip gc;
- 	void __iomem *base;
-+	void __iomem *cpumask_base;
-+	struct cpumask cpu_irq_maskable;
- 	raw_spinlock_t lock;
- 	u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
- 	u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
-@@ -76,6 +79,11 @@ enum realtek_gpio_flags {
- 	 * fields, and [BA, DC] for 2-bit fields.
- 	 */
- 	GPIO_PORTS_REVERSED = BIT(1),
-+	/*
-+	 * Interrupts can be enabled per cpu. This requires a secondary IO
-+	 * range, where the per-cpu enable masks are located.
-+	 */
-+	GPIO_INTERRUPTS_PER_CPU = BIT(2),
- };
- 
- static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
-@@ -250,14 +258,61 @@ static void realtek_gpio_irq_handler(str
- 	chained_irq_exit(irq_chip, desc);
- }
- 
-+static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl,
-+	unsigned int port, int cpu)
-+{
-+	return ctrl->cpumask_base + ctrl->port_offset_u8(port) +
-+		REALTEK_GPIO_PORTS_PER_BANK * cpu;
-+}
-+
-+static int realtek_gpio_irq_set_affinity(struct irq_data *data,
-+	const struct cpumask *dest, bool force)
-+{
-+	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
-+	unsigned int line = irqd_to_hwirq(data);
-+	unsigned int port = line / 8;
-+	unsigned int port_pin = line % 8;
-+	void __iomem *irq_cpu_mask;
-+	unsigned long flags;
-+	int cpu;
-+	u8 v;
-+
-+	if (!ctrl->cpumask_base)
-+		return -ENXIO;
-+
-+	raw_spin_lock_irqsave(&ctrl->lock, flags);
-+
-+	for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
-+		irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu);
-+		v = ioread8(irq_cpu_mask);
-+
-+		if (cpumask_test_cpu(cpu, dest))
-+			v |= BIT(port_pin);
-+		else
-+			v &= ~BIT(port_pin);
-+
-+		iowrite8(v, irq_cpu_mask);
-+	}
-+
-+	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
-+
-+	irq_data_update_effective_affinity(data, dest);
-+
-+	return 0;
-+}
-+
- static int realtek_gpio_irq_init(struct gpio_chip *gc)
- {
- 	struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
- 	unsigned int port;
-+	int cpu;
- 
- 	for (port = 0; (port * 8) < gc->ngpio; port++) {
- 		realtek_gpio_write_imr(ctrl, port, 0, 0);
- 		realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
-+
-+		for_each_cpu(cpu, &ctrl->cpu_irq_maskable)
-+			iowrite8(GENMASK(7, 0), realtek_gpio_irq_cpu_mask(ctrl, port, cpu));
- 	}
- 
- 	return 0;
-@@ -269,6 +324,7 @@ static struct irq_chip realtek_gpio_irq_
- 	.irq_mask = realtek_gpio_irq_mask,
- 	.irq_unmask = realtek_gpio_irq_unmask,
- 	.irq_set_type = realtek_gpio_irq_set_type,
-+	.irq_set_affinity = realtek_gpio_irq_set_affinity,
- };
- 
- static const struct of_device_id realtek_gpio_of_match[] = {
-@@ -293,8 +349,10 @@ static int realtek_gpio_probe(struct pla
- 	unsigned int dev_flags;
- 	struct gpio_irq_chip *girq;
- 	struct realtek_gpio_ctrl *ctrl;
-+	struct resource *res;
- 	u32 ngpios;
--	int err, irq;
-+	unsigned int nr_cpus;
-+	int cpu, err, irq;
- 
- 	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
- 	if (!ctrl)
-@@ -355,6 +413,21 @@ static int realtek_gpio_probe(struct pla
- 		girq->init_hw = realtek_gpio_irq_init;
- 	}
- 
-+	cpumask_clear(&ctrl->cpu_irq_maskable);
-+
-+	if ((dev_flags & GPIO_INTERRUPTS_PER_CPU) && irq > 0) {
-+		ctrl->cpumask_base = devm_platform_get_and_ioremap_resource(pdev, 1, &res);
-+		if (IS_ERR(ctrl->cpumask_base))
-+			return dev_err_probe(dev, PTR_ERR(ctrl->cpumask_base),
-+				"missing CPU IRQ mask registers");
-+
-+		nr_cpus = resource_size(res) / REALTEK_GPIO_PORTS_PER_BANK;
-+		nr_cpus = min(nr_cpus, num_present_cpus());
-+
-+		for (cpu = 0; cpu < nr_cpus; cpu++)
-+			cpumask_set_cpu(cpu, &ctrl->cpu_irq_maskable);
-+	}
-+
- 	return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
- }
- 
diff --git a/target/linux/realtek/patches-5.10/021-v5.19-04-gpio-realtek-otto-Add-RTL930x-support.patch b/target/linux/realtek/patches-5.10/021-v5.19-04-gpio-realtek-otto-Add-RTL930x-support.patch
deleted file mode 100644
index 536c85740a6b..000000000000
--- a/target/linux/realtek/patches-5.10/021-v5.19-04-gpio-realtek-otto-Add-RTL930x-support.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From deaf1cecdeb052cdb5e92fd642016198724b44a4 Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Sat, 9 Apr 2022 21:55:49 +0200
-Subject: [PATCH 4/6] gpio: realtek-otto: Add RTL930x support
-
-The RTL930x SoC series has support for 24 GPIOs, with the port order
-reversed compared to RTL838x and RTL839x. The RTL930x series also has
-two CPUs (VPEs) and can distribute individual GPIO interrupts between
-them.
-
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
----
- drivers/gpio/gpio-realtek-otto.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/gpio/gpio-realtek-otto.c
-+++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -338,6 +338,10 @@ static const struct of_device_id realtek
- 	{
- 		.compatible = "realtek,rtl8390-gpio",
- 	},
-+	{
-+		.compatible = "realtek,rtl9300-gpio",
-+		.data = (void *)(GPIO_PORTS_REVERSED | GPIO_INTERRUPTS_PER_CPU)
-+	},
- 	{}
- };
- MODULE_DEVICE_TABLE(of, realtek_gpio_of_match);
diff --git a/target/linux/realtek/patches-5.10/021-v5.19-06-gpio-realtek-otto-Add-RTL931x-support.patch b/target/linux/realtek/patches-5.10/021-v5.19-06-gpio-realtek-otto-Add-RTL931x-support.patch
deleted file mode 100644
index 16990ce053ea..000000000000
--- a/target/linux/realtek/patches-5.10/021-v5.19-06-gpio-realtek-otto-Add-RTL931x-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From d3bf3dc4bbbf6109bd9b4bd60089d36205ec4a37 Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Sat, 9 Apr 2022 21:55:51 +0200
-Subject: [PATCH 6/6] gpio: realtek-otto: Add RTL931x support
-
-The RTL931x SoC series has support for 32 GPIOs, although not all lines
-may be broken out to a physical pad.
-
-The GPIO bank's parent interrupt can be routed to either or both of the
-SoC's CPU cores by the GIC. Line-by-line IRQ balancing is not possible
-on these SoCs.
-
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
----
- drivers/gpio/gpio-realtek-otto.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/gpio/gpio-realtek-otto.c
-+++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -342,6 +342,9 @@ static const struct of_device_id realtek
- 		.compatible = "realtek,rtl9300-gpio",
- 		.data = (void *)(GPIO_PORTS_REVERSED | GPIO_INTERRUPTS_PER_CPU)
- 	},
-+	{
-+		.compatible = "realtek,rtl9310-gpio",
-+	},
- 	{}
- };
- MODULE_DEVICE_TABLE(of, realtek_gpio_of_match);
diff --git a/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch b/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch
deleted file mode 100644
index fce26133fc26..000000000000
--- a/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From fce11f68491b46b93df69de0630cd9edb90bc772 Mon Sep 17 00:00:00 2001
-From: Birger Koblitz <git@birger-koblitz.de>
-Date: Wed, 29 Dec 2021 21:54:21 +0100
-Subject: [PATCH] realtek: Create 4 different Realtek Platforms
-
-Creates RTL83XX as a basic kernel config parameter for the
-RTL838X, RTL839x, RTL930X and RTL931X platforms with respective
-configurations for the SoCs, which are introduced in addition.
-
-Submitted-by: Birger Koblitz <git@birger-koblitz.de>
----
- arch/mips/Kbuild.platforms                    |  1 +
- arch/mips/Kconfig                             | 57 ++++++++++++++
- 2 files changed, 58 insertions(+)
-
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -23,6 +23,7 @@ platform-$(CONFIG_PIC32MZDA)		+= pic32/
- platform-$(CONFIG_MACH_PISTACHIO)	+= pistachio/
- platform-$(CONFIG_RALINK)		+= ralink/
- platform-$(CONFIG_MIKROTIK_RB532)	+= rb532/
-+platform-$(CONFIG_RTL83XX)		+= rtl838x/
- platform-$(CONFIG_SGI_IP22)		+= sgi-ip22/
- platform-$(CONFIG_SGI_IP27)		+= sgi-ip27/
- platform-$(CONFIG_SGI_IP28)		+= sgi-ip22/
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1037,8 +1037,59 @@ config NLM_XLP_BOARD
- 	  This board is based on Netlogic XLP Processor.
- 	  Say Y here if you have a XLP based board.
- 
-+config RTL83XX
-+	bool "Realtek based platforms"
-+	select DMA_NONCOHERENT
-+	select IRQ_MIPS_CPU
-+	select NO_EXCEPT_FILL
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_HAS_CPU_MIPS32_R2
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_SUPPORTS_HIGHMEM
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SYS_SUPPORTS_MIPS16
-+	select SYS_HAS_EARLY_PRINTK
-+	select SYS_HAS_EARLY_PRINTK_8250
-+	select USE_GENERIC_EARLY_PRINTK_8250
-+	select BOOT_RAW
-+	select PINCTRL
-+	select ARCH_HAS_RESET_CONTROLLER
-+	select RESET_CONTROLLER
-+	select USE_OF
-+
- endchoice
- 
-+config RTL838X
-+	bool "Realtek RTL838X based platforms"
-+	depends on RTL83XX
-+	select CPU_SUPPORTS_CPUFREQ
-+	select MIPS_EXTERNAL_TIMER
-+
-+config RTL839X
-+	bool "Realtek RTL839X based platforms"
-+	depends on RTL83XX
-+	select CPU_SUPPORTS_CPUFREQ
-+	select MIPS_EXTERNAL_TIMER
-+	select SYS_SUPPORTS_MULTITHREADING
-+
-+config RTL930X
-+	bool "Realtek RTL930X based platforms"
-+	depends on RTL83XX
-+	select MIPS_CPU_SCACHE
-+	select CSRC_R4K
-+	select CEVT_RTL9300
-+	select SYS_SUPPORTS_MULTITHREADING
-+
-+config RTL931X
-+	bool "Realtek RTL931X based platforms"
-+	depends on RTL930X
-+	select MIPS_GIC
-+	select COMMON_CLK
-+	select CLKSRC_MIPS_GIC
-+	select SYS_SUPPORTS_VPE_LOADER
-+	select SYS_SUPPORTS_SMP
-+	select SYS_SUPPORTS_MIPS_CPS
-+
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/ath25/Kconfig"
- source "arch/mips/ath79/Kconfig"
-@@ -1097,6 +1148,9 @@ config CEVT_GT641XX
- config CEVT_R4K
- 	bool
- 
-+config CEVT_RTL9300
-+	bool
-+
- config CEVT_SB1250
- 	bool
- 
diff --git a/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch b/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch
deleted file mode 100644
index 27256512438b..000000000000
--- a/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 26 Nov 2020 12:02:21 +0100
-Subject: [PATCH] realtek: update the tree to the latest refactored version
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-* rename the target to realtek
-* add refactored DSA driver
-* add latest gpio driver
-* lots of arch cleanups
-* new irq driver
-* additional boards
-
-Submitted-by: Bert Vermeulen <bert@biot.com>
-Submitted-by: Birger Koblitz <mail@birger-koblitz.de>
-Submitted-by: Sander Vanheule <sander@svanheule.net>
-Submitted-by: Bjørn Mork <bjorn@mork.no>
-Submitted-by: John Crispin <john@phrozen.org>
----
- drivers/gpio/Kconfig                          |    6 ++++++
- drivers/gpio/Makefile                         |    1 +
- 2 files changed, 7 insertions(+)
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -508,6 +508,12 @@ config GPIO_REG
- 	  A 32-bit single register GPIO fixed in/out implementation.  This
- 	  can be used to represent any register as a set of GPIO signals.
- 
-+config GPIO_RTL8231
-+	tristate "RTL8231 GPIO"
-+	depends on RTL83XX
-+	help
-+	  Say yes here to support Realtek RTL8231 GPIO expansion chips.
-+
- config GPIO_SAMA5D2_PIOBU
- 	tristate "SAMA5D2 PIOBU GPIO support"
- 	depends on MFD_SYSCON
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -127,6 +127,7 @@ obj-$(CONFIG_GPIO_RDA)			+= gpio-rda.o
- obj-$(CONFIG_GPIO_RDC321X)		+= gpio-rdc321x.o
- obj-$(CONFIG_GPIO_REALTEK_OTTO)		+= gpio-realtek-otto.o
- obj-$(CONFIG_GPIO_REG)			+= gpio-reg.o
-+obj-$(CONFIG_GPIO_RTL8231)		+= gpio-rtl8231.o
- obj-$(CONFIG_ARCH_SA1100)		+= gpio-sa1100.o
- obj-$(CONFIG_GPIO_SAMA5D2_PIOBU)	+= gpio-sama5d2-piobu.o
- obj-$(CONFIG_GPIO_SCH311X)		+= gpio-sch311x.o
diff --git a/target/linux/realtek/patches-5.10/302-clocksource-add-otto-driver.patch b/target/linux/realtek/patches-5.10/302-clocksource-add-otto-driver.patch
deleted file mode 100644
index 81dff89f82f1..000000000000
--- a/target/linux/realtek/patches-5.10/302-clocksource-add-otto-driver.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 3cc8011171186d906c547bc6f0c1f8e350edc7cf Mon Sep 17 00:00:00 2001
-From: Markus Stockhausen <markus.stockhausen@gmx.de>
-Date: Mon, 3 Oct 2022 14:45:21 +0200
-Subject: [PATCH] realtek: resurrect timer driver
-
-Now that we provide a clock driver for the Reltek SOCs the CPU frequency might
-change on demand. This has direct visible effects during operation
-
-- the CEVT 4K timer is no longer a stable clocksource
-- after CPU frequencies changes time calculation works wrong
-- sched_clock falls back to kernel default interval (100 Hz)
-- timestamps in dmesg have only 2 digits left
-
-[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps ...
-[    0.060000] pid_max: default: 32768 minimum: 301
-[    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
-[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
-[    0.080000] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
-[    0.090000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ...
-
-Looking around where we can start the CEVT timer for RTL930X is a good basis.
-Initially it was developed as a clocksource driver for the broken timer in that
-specific SOC series. Afterwards it was shifted around to the CEVT location,
-got SMP enablement and lost its clocksource feature. So we at least have
-something to copy from. As the timers on these devices are well understood
-the implementation follows this way:
-
-- leave the RTL930X implementation as is
-- provide a new driver for RTL83XX devices only
-- swap RTL930X driver at a later time
-
-Like the clock driver this patch contains a self contained module that is SOC
-independet and already provides full support for the RTL838X, RTL839X and
-RTL930X devices. Some of the new (or reestablished) features are:
-
-- simplified initialization routines
-- SMP setup with CPU hotplug framework
-- derived from LXB clock speed
-- supplied clocksource
-- dedicated register functions for better readability
-- documentation about some caveats
-
-Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
-[remove unused header includes, remove old CONFIG_MIPS dependency, add
-REALTEK_ prefix to driver symbol]
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-
----
- drivers/clocksource/Kconfig                   | 12 +++
- drivers/clocksource/Makefile                  |  1 +
- include/linux/cpuhotplug.h                    |  1 +
- 3 files changed, 14 insertions(+)
- 
---- a/drivers/clocksource/Kconfig
-+++ b/drivers/clocksource/Kconfig
-@@ -127,6 +127,17 @@ config RDA_TIMER
- 	help
- 	  Enables the support for the RDA Micro timer driver.
- 
-+config REALTEK_OTTO_TIMER
-+	bool "Clocksource/timer for the Realtek Otto platform"
-+	select COMMON_CLK
-+	select TIMER_OF
-+	help
-+	  This driver adds support for the timers found in the Realtek RTL83xx
-+	  and RTL93xx SoCs series. This includes chips such as RTL8380, RTL8381
-+	  and RTL832, as well as chips from the RTL839x series, such as RTL8390
-+	  RT8391, RTL8392, RTL8393 and RTL8396 and chips of the RTL930x series
-+	  such as RTL9301, RTL9302 or RTL9303.
-+
- config SUN4I_TIMER
- 	bool "Sun4i timer driver" if COMPILE_TEST
- 	depends on HAS_IOMEM
---- a/drivers/clocksource/Makefile
-+++ b/drivers/clocksource/Makefile
-@@ -63,6 +63,7 @@ obj-$(CONFIG_MILBEAUT_TIMER)	+= timer-mi
- obj-$(CONFIG_SPRD_TIMER)	+= timer-sprd.o
- obj-$(CONFIG_NPCM7XX_TIMER)	+= timer-npcm7xx.o
- obj-$(CONFIG_RDA_TIMER)		+= timer-rda.o
-+obj-$(CONFIG_REALTEK_OTTO_TIMER)	+= timer-rtl-otto.o
- 
- obj-$(CONFIG_ARC_TIMERS)		+= arc_timer.o
- obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
---- a/include/linux/cpuhotplug.h
-+++ b/include/linux/cpuhotplug.h
-@@ -133,6 +133,7 @@ enum cpuhp_state {
- 	CPUHP_AP_MARCO_TIMER_STARTING,
- 	CPUHP_AP_MIPS_GIC_TIMER_STARTING,
- 	CPUHP_AP_ARC_TIMER_STARTING,
-+	CPUHP_AP_REALTEK_TIMER_STARTING,
- 	CPUHP_AP_RISCV_TIMER_STARTING,
- 	CPUHP_AP_CLINT_TIMER_STARTING,
- 	CPUHP_AP_CSKY_TIMER_STARTING,
diff --git a/target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch b/target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch
deleted file mode 100644
index 1763d31fb0dc..000000000000
--- a/target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 9bac1c20b8f39f2e0e342b087add5093b94feaed Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Wed, 5 May 2021 22:05:39 +0900
-Subject: realtek: fix gpio-realtek-otto driver dependency
-
-"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X"
-is used in OpenWrt, so fix the dependency by renaming it.
-
-Submitted-by: INAGAKI Hiroshi <musashino.open@gmail.com>
----
- drivers/gpio/Kconfig                          |   4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -491,8 +491,8 @@ config GPIO_RDA
- 
- config GPIO_REALTEK_OTTO
- 	tristate "Realtek Otto GPIO support"
--	depends on MACH_REALTEK_RTL
--	default MACH_REALTEK_RTL
-+	depends on RTL83XX
-+	default RTL838X
- 	select GPIO_GENERIC
- 	select GPIOLIB_IRQCHIP
- 	help
diff --git a/target/linux/realtek/patches-5.10/304-spi-update-dependency-for-spi-realtek-rtl.patch b/target/linux/realtek/patches-5.10/304-spi-update-dependency-for-spi-realtek-rtl.patch
deleted file mode 100644
index 23c5448aa2ea..000000000000
--- a/target/linux/realtek/patches-5.10/304-spi-update-dependency-for-spi-realtek-rtl.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 0b000cbfe0aa0323bffa855ef8449c0687a4c071 Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Thu, 6 May 2021 19:30:58 +0900
-Subject: realtek: backport spi-realtek-rtl driver from 5.12 to 5.10
-
-This patch backports "spi-realtek-rtl" driver to Kernel 5.10 from 5.12.
-"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X"
-is used in OpenWrt, so update the dependency by the additional patch.
-
-Submitted-by: INAGAKI Hiroshi <musashino.open@gmail.com>
----
- drivers/spi/Makefile                          |  2 +-
- 1 files changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -94,7 +94,7 @@ obj-$(CONFIG_SPI_QCOM_QSPI)		+= spi-qcom
- obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
- obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
- obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
--obj-$(CONFIG_MACH_REALTEK_RTL)		+= spi-realtek-rtl.o
-+obj-$(CONFIG_RTL83XX)			+= spi-realtek-rtl.o
- obj-$(CONFIG_SPI_RPCIF)			+= spi-rpc-if.o
- obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
- obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
diff --git a/target/linux/realtek/patches-5.10/305-irqchip-update-dependency-for-irq-realtek-rtl.patch b/target/linux/realtek/patches-5.10/305-irqchip-update-dependency-for-irq-realtek-rtl.patch
deleted file mode 100644
index 0c1cc4235e6c..000000000000
--- a/target/linux/realtek/patches-5.10/305-irqchip-update-dependency-for-irq-realtek-rtl.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 2cd00b51470a30198b048a5fca48a04db77e29cc Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Fri, 21 May 2021 23:16:37 +0900
-Subject: [PATCH] realtek: backport irq-realtek-rtl driver from 5.12 to 5.10
-
-This patch backports "irq-realtek-rtl" driver to Kernel 5.10 from 5.12.
-"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X"
-is used in OpenWrt, so update the dependency by the additional patch.
-
-Submitted-by: INAGAKI Hiroshi <musashino.open@gmail.com>
----
- drivers/irqchip/Makefile                      | 2 +-
- 1 files changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -114,4 +114,4 @@ obj-$(CONFIG_LOONGSON_PCH_PIC)		+= irq-l
- obj-$(CONFIG_LOONGSON_PCH_MSI)		+= irq-loongson-pch-msi.o
- obj-$(CONFIG_MST_IRQ)			+= irq-mst-intc.o
- obj-$(CONFIG_SL28CPLD_INTC)		+= irq-sl28cpld.o
--obj-$(CONFIG_MACH_REALTEK_RTL)		+= irq-realtek-rtl.o
-+obj-$(CONFIG_RTL83XX)			+= irq-realtek-rtl.o
diff --git a/target/linux/realtek/patches-5.10/307-wdt-update-dependency-for-realtek-otto-wdt.patch b/target/linux/realtek/patches-5.10/307-wdt-update-dependency-for-realtek-otto-wdt.patch
deleted file mode 100644
index f92981340bba..000000000000
--- a/target/linux/realtek/patches-5.10/307-wdt-update-dependency-for-realtek-otto-wdt.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From b8fc5eecdc5d33cf261986436597b5482ab856da Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Sun, 14 Nov 2021 19:45:32 +0100
-Subject: [PATCH] realtek: Backport Realtek Otto WDT driver
-
-Add patch submitted upstream to linux-watchdog and replace the MIPS
-architecture symbols. Requires one extra patch for the DIV_ROUND_*
-macros, which have moved to a different header since 5.10.
-
-Submitted-by: Sander Vanheule <sander@svanheule.net>
-Tested-by: Stijn Segers <foss@volatilesystems.org>
-Tested-by: Paul Fertser <fercerpav@gmail.com>
-Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
----
- drivers/watchdog/Kconfig                      | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -997,10 +997,10 @@ config RTD119X_WATCHDOG
- 
- config REALTEK_OTTO_WDT
- 	tristate "Realtek Otto MIPS watchdog support"
--	depends on MACH_REALTEK_RTL || COMPILE_TEST
-+	depends on RTL83XX
- 	depends on COMMON_CLK
- 	select WATCHDOG_CORE
--	default MACH_REALTEK_RTL
-+	default RTL83XX
- 	help
- 	  Say Y here to include support for the watchdog timer on Realtek
- 	  RTL838x, RTL839x, RTL930x SoCs. This watchdog has pretimeout
diff --git a/target/linux/realtek/patches-5.10/308-otto-wdt-fix-missing-math-header.patch b/target/linux/realtek/patches-5.10/308-otto-wdt-fix-missing-math-header.patch
deleted file mode 100644
index 78b145617fab..000000000000
--- a/target/linux/realtek/patches-5.10/308-otto-wdt-fix-missing-math-header.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From b8fc5eecdc5d33cf261986436597b5482ab856da Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Sun, 14 Nov 2021 19:45:32 +0100
-Subject: [PATCH] realtek: Backport Realtek Otto WDT driver
-
-Add patch submitted upstream to linux-watchdog and replace the MIPS
-architecture symbols. Requires one extra patch for the DIV_ROUND_*
-macros, which have moved to a different header since 5.10.
-
-Submitted-by: Sander Vanheule <sander@svanheule.net>
-Tested-by: Stijn Segers <foss@volatilesystems.org>
-Tested-by: Paul Fertser <fercerpav@gmail.com>
-Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
----
- drivers/watchdog/realtek_otto_wdt.c           | 2 +-
- 1 files changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/watchdog/realtek_otto_wdt.c
-+++ b/drivers/watchdog/realtek_otto_wdt.c
-@@ -21,7 +21,7 @@
- #include <linux/delay.h>
- #include <linux/interrupt.h>
- #include <linux/io.h>
--#include <linux/math.h>
-+#include <linux/kernel.h>
- #include <linux/minmax.h>
- #include <linux/module.h>
- #include <linux/mod_devicetable.h>
diff --git a/target/linux/realtek/patches-5.10/309-cevt-rtl9300-support.patch b/target/linux/realtek/patches-5.10/309-cevt-rtl9300-support.patch
deleted file mode 100644
index 93d69c07cf1b..000000000000
--- a/target/linux/realtek/patches-5.10/309-cevt-rtl9300-support.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 775d903216a08c2a8009863d2f9c33f62657ba94 Mon Sep 17 00:00:00 2001
-From: Birger Koblitz <git@birger-koblitz.de>
-Date: Thu, 6 Jan 2022 20:27:01 +0100
-Subject: [PATCH] realtek: Replace the RTL9300 generic timer with a CEVT timer
-
-The RTL9300 has a broken R4K MIPS timer interrupt, however, the
-R4K clocksource works. We replace the RTL9300 timer with a
-Clock Event Timer (CEVT), which is VSMP aware and can be instantiated
-as part of brining a VSMTP cpu up instead of the R4K CEVT source.
-For this we place the RTL9300 CEVT timer in arch/mips/kernel
-together with other MIPS CEVT timers, initialize the SoC IRQs
-from a modified smp-mt.c and instantiate each timer as part
-of the MIPS time setup in arch/mips/include/asm/time.h instead
-of the R4K CEVT, similarly as is done by other MIPS CEVT timers.
-
-Submitted-by: Birger Koblitz <git@birger-koblitz.de>
----
- arch/mips/kernel/Makefile                     | 1 +
- arch/mips/include/asm/time.h                  | 7 +++++++
- 2 files changed, 8 insertions(+)
-
---- a/arch/mips/kernel/Makefile
-+++ b/arch/mips/kernel/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm14
- obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
- obj-$(CONFIG_CEVT_DS1287)	+= cevt-ds1287.o
- obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
-+obj-$(CONFIG_CEVT_RTL9300)	+= cevt-rtl9300.o
- obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
- obj-$(CONFIG_CEVT_TXX9)		+= cevt-txx9.o
- obj-$(CONFIG_CSRC_BCM1480)	+= csrc-bcm1480.o
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -15,6 +15,8 @@
- #include <linux/clockchips.h>
- #include <linux/clocksource.h>
- 
-+extern void rtl9300_clockevent_init(void);
-+
- extern spinlock_t rtc_lock;
- 
- /*
-@@ -43,6 +45,11 @@ extern int r4k_clockevent_init(void);
- 
- static inline int mips_clockevent_init(void)
- {
-+#ifdef CONFIG_CEVT_RTL9300
-+	rtl9300_clockevent_init();
-+	return 0;
-+#endif
-+
- #ifdef CONFIG_CEVT_R4K
- 	return r4k_clockevent_init();
- #else
diff --git a/target/linux/realtek/patches-5.10/310-add-i2c-rtl9300-support.patch b/target/linux/realtek/patches-5.10/310-add-i2c-rtl9300-support.patch
deleted file mode 100644
index 4df9bf043b16..000000000000
--- a/target/linux/realtek/patches-5.10/310-add-i2c-rtl9300-support.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 63a0a4d85bc900464c5b046b13808a582345f8c8 Mon Sep 17 00:00:00 2001
-From: Birger Koblitz <git@birger-koblitz.de>
-Date: Sat, 11 Dec 2021 20:14:47 +0100
-Subject: [PATCH] realtek: Add support for RTL9300/RTL9310 I2C controller
-
-This adds support for the RTL9300 and RTL9310 I2C controller.
-The controller implements the SMBus protocol for SMBus transfers
-over an I2C bus. The driver supports selecting one of the 2 possible
-SCL pins and any of the 8 possible SDA pins. Bus speeds of
-100kHz (standard speed) and 400kHz (high speed I2C) are supported.
-
-Submitted-by: Birger Koblitz <git@birger-koblitz.de>
----
- drivers/i2c/busses/Kconfig                    | 10 +++++++++
- drivers/i2c/busses/Makefile                   |  1 +
- 2 files changed, 11 insertions(+)
-
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -954,6 +954,16 @@ config I2C_RK3X
- 	  This driver can also be built as a module. If so, the module will
- 	  be called i2c-rk3x.
- 
-+config I2C_RTL9300
-+	tristate "Realtek RTL9300 I2C adapter"
-+	depends on OF
-+	help
-+	  Say Y here to include support for the I2C adapter in Realtek RTL9300
-+	  and RTL9310 SoCs.
-+
-+	  This driver can also be built as a module. If so, the module will
-+	  be called i2c-rtl9300.
-+
- config HAVE_S3C2410_I2C
- 	bool
- 	help
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -95,6 +95,7 @@ obj-$(CONFIG_I2C_QCOM_GENI)	+= i2c-qcom-
- obj-$(CONFIG_I2C_QUP)		+= i2c-qup.o
- obj-$(CONFIG_I2C_RIIC)		+= i2c-riic.o
- obj-$(CONFIG_I2C_RK3X)		+= i2c-rk3x.o
-+obj-$(CONFIG_I2C_RTL9300)	+= i2c-rtl9300.o
- obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
- obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
- obj-$(CONFIG_I2C_SH_MOBILE)	+= i2c-sh_mobile.o
diff --git a/target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch b/target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch
deleted file mode 100644
index d0bfba45381f..000000000000
--- a/target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From f4bdb7fdccdfe3fa382abe77f72a16c2f2e6add0 Mon Sep 17 00:00:00 2001
-From: Birger Koblitz <git@birger-koblitz.de>
-Date: Sat, 11 Dec 2021 20:25:37 +0100
-Subject: [PATCH] realtek: Add support for RTL9300/RTL9310 I2C multiplexing
-
-The RTL9300/RTL9310 I2C controllers have support for 2 independent I2C
-masters, each with a fixed SCL pin, that cannot be changed. Each of these
-masters can use 8 (RTL9300) or 16 (RTL9310) different pins for SDA.
-This multiplexer directly controls the two masters and their shared
-IO configuration registers to allow multiplexing between any of these
-busses. The two masters cannot be used in parallel as the multiplex
-is protected by a standard multiplex lock.
-
-Submitted-by: Birger Koblitz <git@birger-koblitz.de>
----
- drivers/i2c/muxes/Kconfig                     |  9 +++++++
- drivers/i2c/muxes/Makefile                    |  1 +
- 2 files changed, 10 insertions(+)
-
---- a/drivers/i2c/muxes/Kconfig
-+++ b/drivers/i2c/muxes/Kconfig
-@@ -99,6 +99,15 @@ config I2C_MUX_REG
- 	  This driver can also be built as a module.  If so, the module
- 	  will be called i2c-mux-reg.
- 
-+config I2C_MUX_RTL9300
-+	tristate "RTL9300 based I2C multiplexer"
-+	help
-+	  If you say yes to this option, support will be included for a
-+	  RTL9300 based I2C multiplexer.
-+
-+	  This driver can also be built as a module.  If so, the module
-+	  will be called i2c-mux-reg.
-+
- config I2C_DEMUX_PINCTRL
- 	tristate "pinctrl-based I2C demultiplexer"
- 	depends on PINCTRL && OF
---- a/drivers/i2c/muxes/Makefile
-+++ b/drivers/i2c/muxes/Makefile
-@@ -14,5 +14,6 @@ obj-$(CONFIG_I2C_MUX_PCA9541)	+= i2c-mux
- obj-$(CONFIG_I2C_MUX_PCA954x)	+= i2c-mux-pca954x.o
- obj-$(CONFIG_I2C_MUX_PINCTRL)	+= i2c-mux-pinctrl.o
- obj-$(CONFIG_I2C_MUX_REG)	+= i2c-mux-reg.o
-+obj-$(CONFIG_I2C_MUX_RTL9300)	+= i2c-mux-rtl9300.o
- 
- ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/target/linux/realtek/patches-5.10/315-irqchip-irq-realtek-rtl-add-VPE-support.patch b/target/linux/realtek/patches-5.10/315-irqchip-irq-realtek-rtl-add-VPE-support.patch
deleted file mode 100644
index 26c36302c283..000000000000
--- a/target/linux/realtek/patches-5.10/315-irqchip-irq-realtek-rtl-add-VPE-support.patch
+++ /dev/null
@@ -1,407 +0,0 @@
-From 6c18e9c491959ac0674ebe36b09f9ddc3f2c9bce Mon Sep 17 00:00:00 2001
-From: Birger Koblitz <git@birger-koblitz.de>
-Date: Fri, 31 Dec 2021 11:56:49 +0100
-Subject: [PATCH] realtek: Add VPE support for the IRQ driver
-
-In order to support VSMP, enable support for both VPEs
-of the RTL839X and RTL930X SoCs in the irq-realtek-rtl
-driver. Add support for IRQ affinity setting.
-
-Submitted-by: Birger Koblitz <git@birger-koblitz.de>
----
- drivers/irqchip/irq-realtek-rtl.c             | 152 +++++++++++++++---
- 1 file changed, 73 insertions(+), 76 deletions(-)
-
---- a/drivers/irqchip/irq-realtek-rtl.c
-+++ b/drivers/irqchip/irq-realtek-rtl.c
-@@ -21,21 +21,63 @@
- #define RTL_ICTL_IRR2		0x10
- #define RTL_ICTL_IRR3		0x14
- 
--#define REG(x)		(realtek_ictl_base + x)
-+#define RTL_ICTL_NUM_INPUTS	32
-+#define RTL_ICTL_NUM_OUTPUTS	15
- 
- static DEFINE_RAW_SPINLOCK(irq_lock);
--static void __iomem *realtek_ictl_base;
-+
-+#define REG(offset, cpu)	(realtek_ictl_base[cpu] + offset)
-+
-+static void __iomem *realtek_ictl_base[NR_CPUS];
-+static cpumask_t realtek_ictl_cpu_configurable;
-+
-+struct realtek_ictl_output {
-+	/* IRQ controller data */
-+	struct fwnode_handle *fwnode;
-+	/* Output specific data */
-+	unsigned int output_index;
-+	struct irq_domain *domain;
-+	u32 child_mask;
-+};
-+
-+/*
-+ * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering,
-+ * placing IRQ 31 in the first four bits. A routing value of '0' means the
-+ * interrupt is left disconnected. Routing values {1..15} connect to output
-+ * lines {0..14}.
-+ */
-+#define IRR_OFFSET(idx)		(4 * (3 - (idx * 4) / 32))
-+#define IRR_SHIFT(idx)		((idx * 4) % 32)
-+
-+static inline u32 read_irr(void __iomem *irr0, int idx)
-+{
-+	return (readl(irr0 + IRR_OFFSET(idx)) >> IRR_SHIFT(idx)) & 0xf;
-+}
-+
-+static inline void write_irr(void __iomem *irr0, int idx, u32 value)
-+{
-+	unsigned int offset = IRR_OFFSET(idx);
-+	unsigned int shift = IRR_SHIFT(idx);
-+	u32 irr;
-+
-+	irr = readl(irr0 + offset) & ~(0xf << shift);
-+	irr |= (value & 0xf) << shift;
-+	writel(irr, irr0 + offset);
-+}
- 
- static void realtek_ictl_unmask_irq(struct irq_data *i)
- {
- 	unsigned long flags;
- 	u32 value;
-+	int cpu;
- 
- 	raw_spin_lock_irqsave(&irq_lock, flags);
- 
--	value = readl(REG(RTL_ICTL_GIMR));
--	value |= BIT(i->hwirq);
--	writel(value, REG(RTL_ICTL_GIMR));
-+	for_each_cpu(cpu, &realtek_ictl_cpu_configurable) {
-+		value = readl(REG(RTL_ICTL_GIMR, cpu));
-+		value |= BIT(i->hwirq);
-+		writel(value, REG(RTL_ICTL_GIMR, cpu));
-+	}
- 
- 	raw_spin_unlock_irqrestore(&irq_lock, flags);
- }
-@@ -44,137 +86,247 @@ static void realtek_ictl_mask_irq(struct
- {
- 	unsigned long flags;
- 	u32 value;
-+	int cpu;
- 
- 	raw_spin_lock_irqsave(&irq_lock, flags);
- 
--	value = readl(REG(RTL_ICTL_GIMR));
--	value &= ~BIT(i->hwirq);
--	writel(value, REG(RTL_ICTL_GIMR));
-+	for_each_cpu(cpu, &realtek_ictl_cpu_configurable) {
-+		value = readl(REG(RTL_ICTL_GIMR, cpu));
-+		value &= ~BIT(i->hwirq);
-+		writel(value, REG(RTL_ICTL_GIMR, cpu));
-+	}
- 
- 	raw_spin_unlock_irqrestore(&irq_lock, flags);
- }
- 
-+static int __maybe_unused realtek_ictl_irq_affinity(struct irq_data *i,
-+	const struct cpumask *dest, bool force)
-+{
-+	struct realtek_ictl_output *output = i->domain->host_data;
-+	cpumask_t cpu_configure;
-+	cpumask_t cpu_disable;
-+	cpumask_t cpu_enable;
-+	unsigned long flags;
-+	int cpu;
-+
-+	raw_spin_lock_irqsave(&irq_lock, flags);
-+
-+	cpumask_and(&cpu_configure, cpu_present_mask, &realtek_ictl_cpu_configurable);
-+
-+	cpumask_and(&cpu_enable, &cpu_configure, dest);
-+	cpumask_andnot(&cpu_disable, &cpu_configure, dest);
-+
-+	for_each_cpu(cpu, &cpu_disable)
-+		write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, 0);
-+
-+	for_each_cpu(cpu, &cpu_enable)
-+		write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, output->output_index + 1);
-+
-+	irq_data_update_effective_affinity(i, &cpu_enable);
-+
-+	raw_spin_unlock_irqrestore(&irq_lock, flags);
-+
-+	return IRQ_SET_MASK_OK;
-+}
-+
- static struct irq_chip realtek_ictl_irq = {
- 	.name = "realtek-rtl-intc",
- 	.irq_mask = realtek_ictl_mask_irq,
- 	.irq_unmask = realtek_ictl_unmask_irq,
-+#ifdef CONFIG_SMP
-+	.irq_set_affinity = realtek_ictl_irq_affinity,
-+#endif
- };
- 
- static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
- {
--	irq_set_chip_and_handler(hw, &realtek_ictl_irq, handle_level_irq);
-+	struct realtek_ictl_output *output = d->host_data;
-+	unsigned long flags;
-+
-+	irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq);
-+
-+	raw_spin_lock_irqsave(&irq_lock, flags);
-+
-+	output->child_mask |= BIT(hw);
-+	write_irr(REG(RTL_ICTL_IRR0, 0), hw, output->output_index + 1);
-+
-+	raw_spin_unlock_irqrestore(&irq_lock, flags);
- 
- 	return 0;
- }
- 
-+static int intc_select(struct irq_domain *d, struct irq_fwspec *fwspec,
-+	enum irq_domain_bus_token bus_token)
-+{
-+	struct realtek_ictl_output *output = d->host_data;
-+	bool routed_elsewhere;
-+	unsigned long flags;
-+	u32 routing_old;
-+	int cpu;
-+
-+	if (fwspec->fwnode != output->fwnode)
-+		return false;
-+
-+	/* Original specifiers had only one parameter */
-+	if (fwspec->param_count < 2)
-+		return true;
-+
-+	raw_spin_lock_irqsave(&irq_lock, flags);
-+
-+	/*
-+	 * Inputs can only be routed to one output, so they shouldn't be
-+	 * allowed to end up in multiple domains.
-+	 */
-+	for_each_cpu(cpu, &realtek_ictl_cpu_configurable) {
-+		routing_old = read_irr(REG(RTL_ICTL_IRR0, cpu), fwspec->param[0]);
-+		routed_elsewhere = routing_old && fwspec->param[1] != routing_old - 1;
-+		if (routed_elsewhere) {
-+			pr_warn("soc int %d already routed to output %d\n",
-+				fwspec->param[0], routing_old - 1);
-+			break;
-+		}
-+	}
-+
-+	raw_spin_unlock_irqrestore(&irq_lock, flags);
-+
-+	return !routed_elsewhere && fwspec->param[1] == output->output_index;
-+}
-+
- static const struct irq_domain_ops irq_domain_ops = {
- 	.map = intc_map,
-+	.select = intc_select,
- 	.xlate = irq_domain_xlate_onecell,
- };
- 
- static void realtek_irq_dispatch(struct irq_desc *desc)
- {
-+	struct realtek_ictl_output *output = irq_desc_get_handler_data(desc);
- 	struct irq_chip *chip = irq_desc_get_chip(desc);
--	struct irq_domain *domain;
--	unsigned int pending;
-+	int cpu = smp_processor_id();
-+	unsigned long pending;
-+	unsigned int soc_int;
- 
- 	chained_irq_enter(chip, desc);
--	pending = readl(REG(RTL_ICTL_GIMR)) & readl(REG(RTL_ICTL_GISR));
-+	pending = readl(REG(RTL_ICTL_GIMR, cpu)) & readl(REG(RTL_ICTL_GISR, cpu))
-+		& output->child_mask;
-+
- 	if (unlikely(!pending)) {
- 		spurious_interrupt();
- 		goto out;
- 	}
--	domain = irq_desc_get_handler_data(desc);
--	generic_handle_irq(irq_find_mapping(domain, __ffs(pending)));
-+
-+	for_each_set_bit(soc_int, &pending, RTL_ICTL_NUM_INPUTS)
-+		generic_handle_irq(irq_find_mapping(output->domain, soc_int));
-+//		generic_handle_domain_irq(output->domain, soc_int);
- 
- out:
- 	chained_irq_exit(chip, desc);
- }
- 
--/*
-- * SoC interrupts are cascaded to MIPS CPU interrupts according to the
-- * interrupt-map in the device tree. Each SoC interrupt gets 4 bits for
-- * the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts
-- * thus go into 4 IRRs.
-- */
--static int __init map_interrupts(struct device_node *node, struct irq_domain *domain)
-+static int __init setup_parent_interrupts(struct device_node *node, int *parents,
-+	unsigned int num_parents)
- {
--	struct device_node *cpu_ictl;
--	const __be32 *imap;
--	u32 imaplen, soc_int, cpu_int, tmp, regs[4];
--	int ret, i, irr_regs[] = {
--		RTL_ICTL_IRR3,
--		RTL_ICTL_IRR2,
--		RTL_ICTL_IRR1,
--		RTL_ICTL_IRR0,
--	};
--	u8 mips_irqs_set;
-+	struct realtek_ictl_output *outputs;
-+	struct realtek_ictl_output *output;
-+	struct irq_domain *domain;
-+	unsigned int p;
- 
--	ret = of_property_read_u32(node, "#address-cells", &tmp);
--	if (ret || tmp)
--		return -EINVAL;
-+	outputs = kcalloc(num_parents, sizeof(*outputs), GFP_KERNEL);
-+	if (!outputs)
-+		return -ENOMEM;
- 
--	imap = of_get_property(node, "interrupt-map", &imaplen);
--	if (!imap || imaplen % 3)
--		return -EINVAL;
-+	for (p = 0; p < num_parents; p++) {
-+		output = outputs + p;
- 
--	mips_irqs_set = 0;
--	memset(regs, 0, sizeof(regs));
--	for (i = 0; i < imaplen; i += 3 * sizeof(u32)) {
--		soc_int = be32_to_cpup(imap);
--		if (soc_int > 31)
--			return -EINVAL;
--
--		cpu_ictl = of_find_node_by_phandle(be32_to_cpup(imap + 1));
--		if (!cpu_ictl)
--			return -EINVAL;
--		ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp);
--		if (ret || tmp != 1)
--			return -EINVAL;
--		of_node_put(cpu_ictl);
--
--		cpu_int = be32_to_cpup(imap + 2);
--		if (cpu_int > 7)
--			return -EINVAL;
--
--		if (!(mips_irqs_set & BIT(cpu_int))) {
--			irq_set_chained_handler_and_data(cpu_int, realtek_irq_dispatch,
--							 domain);
--			mips_irqs_set |= BIT(cpu_int);
--		}
-+		domain = irq_domain_add_linear(node, RTL_ICTL_NUM_INPUTS, &irq_domain_ops, output);
-+		if (!domain)
-+			goto domain_err;
- 
--		regs[(soc_int * 4) / 32] |= cpu_int << (soc_int * 4) % 32;
--		imap += 3;
--	}
-+		output->fwnode = of_node_to_fwnode(node);
-+		output->output_index = p;
-+		output->domain = domain;
- 
--	for (i = 0; i < 4; i++)
--		writel(regs[i], REG(irr_regs[i]));
-+		irq_set_chained_handler_and_data(parents[p], realtek_irq_dispatch, output);
-+	}
- 
- 	return 0;
-+
-+domain_err:
-+	while (p--) {
-+		irq_set_chained_handler_and_data(parents[p], NULL, NULL);
-+		irq_domain_remove(outputs[p].domain);
-+	}
-+
-+	kfree(outputs);
-+
-+	return -ENOMEM;
- }
- 
- static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent)
- {
--	struct irq_domain *domain;
--	int ret;
-+	int parent_irqs[RTL_ICTL_NUM_OUTPUTS];
-+	struct of_phandle_args oirq;
-+	unsigned int num_parents;
-+	unsigned int soc_irq;
-+	unsigned int p;
-+	int cpu;
-+
-+	cpumask_clear(&realtek_ictl_cpu_configurable);
-+
-+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
-+		realtek_ictl_base[cpu] = of_iomap(node, cpu);
-+		if (realtek_ictl_base[cpu]) {
-+			cpumask_set_cpu(cpu, &realtek_ictl_cpu_configurable);
-+
-+			/* Disable all cascaded interrupts and clear routing */
-+			writel(0, REG(RTL_ICTL_GIMR, cpu));
-+			for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++)
-+				write_irr(REG(RTL_ICTL_IRR0, cpu), soc_irq, 0);
-+		}
-+	}
- 
--	realtek_ictl_base = of_iomap(node, 0);
--	if (!realtek_ictl_base)
-+	if (cpumask_empty(&realtek_ictl_cpu_configurable))
- 		return -ENXIO;
- 
--	/* Disable all cascaded interrupts */
--	writel(0, REG(RTL_ICTL_GIMR));
-+	num_parents = of_irq_count(node);
-+	if (num_parents > RTL_ICTL_NUM_OUTPUTS) {
-+		pr_err("too many parent interrupts\n");
-+		return -EINVAL;
-+	}
- 
--	domain = irq_domain_add_simple(node, 32, 0,
--				       &irq_domain_ops, NULL);
-+	for (p = 0; p < num_parents; p++)
-+		parent_irqs[p] = of_irq_get(node, p);
- 
--	ret = map_interrupts(node, domain);
--	if (ret) {
--		pr_err("invalid interrupt map\n");
--		return ret;
-+	if (WARN_ON(!num_parents)) {
-+		/*
-+		 * If DT contains no parent interrupts, assume MIPS CPU IRQ 2
-+		 * (HW0) is connected to the first output. This is the case for
-+		 * all known hardware anyway. "interrupt-map" is deprecated, so
-+		 * don't bother trying to parse that.
-+		 * Since this is to account for old devicetrees with one-cell
-+		 * interrupt specifiers, only one output domain is needed.
-+		 */
-+		oirq.np = of_find_compatible_node(NULL, NULL, "mti,cpu-interrupt-controller");
-+		if (oirq.np) {
-+			oirq.args_count = 1;
-+			oirq.args[0] = 2;
-+
-+			parent_irqs[0] = irq_create_of_mapping(&oirq);
-+			num_parents = 1;
-+		}
-+
-+		of_node_put(oirq.np);
- 	}
- 
--	return 0;
-+	/* Ensure we haven't collected any errors before proceeding */
-+	for (p = 0; p < num_parents; p++) {
-+		if (parent_irqs[p] < 0)
-+			return parent_irqs[p];
-+		if (!parent_irqs[p])
-+			return -ENODEV;
-+	}
-+
-+	return setup_parent_interrupts(node, &parent_irqs[0], num_parents);
- }
- 
- IRQCHIP_DECLARE(realtek_rtl_intc, "realtek,rtl-intc", realtek_rtl_of_init);
diff --git a/target/linux/realtek/patches-5.10/316-otto-gpio-uniprocessor-irq-mask.patch b/target/linux/realtek/patches-5.10/316-otto-gpio-uniprocessor-irq-mask.patch
deleted file mode 100644
index 3980875dd4b0..000000000000
--- a/target/linux/realtek/patches-5.10/316-otto-gpio-uniprocessor-irq-mask.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From bde6311569ef25a00c3beaeabfd6b78b19651872 Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Sun, 29 May 2022 19:38:09 +0200
-Subject: [PATCH] realtek: don't unmask non-maskable GPIO IRQs
-
-On uniprocessor builds, for_each_cpu(cpu, mask) will assume 'mask'
-always contains exactly one CPU, and ignore the actual mask contents.
-This causes the loop to run, even when it shouldn't on an empty mask,
-and tries to access an uninitialised pointer.
-
-Fix this by wrapping the loop in a cpumask_empty() check, to ensure it
-will not run on uniprocessor builds if the CPU mask is empty.
-
-Fixes: af6cd37f42f3 ("realtek: replace RTL93xx GPIO patches")
-Reported-by: INAGAKI Hiroshi <musashino.open@gmail.com>
-Reported-by: Robert Marko <robimarko@gmail.com>
-Tested-by: Robert Marko <robimarko@gmail.com>
-Submitted-by: Sander Vanheule <sander@svanheule.net>
----
- drivers/gpio/gpio-realtek-otto.c              | 9 +++++++++++--
- 1 file changed, 11 insertions(+), 2 deletions(-)
-
---- a/drivers/gpio/gpio-realtek-otto.c
-+++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -304,6 +304,7 @@ static int realtek_gpio_irq_set_affinity
- static int realtek_gpio_irq_init(struct gpio_chip *gc)
- {
- 	struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
-+	void __iomem *irq_cpu_mask;
- 	unsigned int port;
- 	int cpu;
- 
-@@ -311,8 +312,16 @@ static int realtek_gpio_irq_init(struct
- 		realtek_gpio_write_imr(ctrl, port, 0, 0);
- 		realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
- 
--		for_each_cpu(cpu, &ctrl->cpu_irq_maskable)
--			iowrite8(GENMASK(7, 0), realtek_gpio_irq_cpu_mask(ctrl, port, cpu));
-+		/*
-+		 * Uniprocessor builds assume a mask always contains one CPU,
-+		 * so only start the loop if we have at least one maskable CPU.
-+		 */
-+		if(!cpumask_empty(&ctrl->cpu_irq_maskable)) {
-+			for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
-+				irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu);
-+				iowrite8(GENMASK(7, 0), irq_cpu_mask);
-+			}
-+		}
- 	}
- 
- 	return 0;
diff --git a/target/linux/realtek/patches-5.10/317-gpio-realtek-otto-switch-to-32-bit-I-O.patch b/target/linux/realtek/patches-5.10/317-gpio-realtek-otto-switch-to-32-bit-I-O.patch
deleted file mode 100644
index 9c043b71269e..000000000000
--- a/target/linux/realtek/patches-5.10/317-gpio-realtek-otto-switch-to-32-bit-I-O.patch
+++ /dev/null
@@ -1,373 +0,0 @@
-From ee0175b3b44288c74d5292c2a9c2c154f6c0317e Mon Sep 17 00:00:00 2001
-From: Sander Vanheule <sander@svanheule.net>
-Date: Sun, 7 Aug 2022 21:21:15 +0200
-Subject: [PATCH] gpio: realtek-otto: switch to 32-bit I/O
-
-By using 16-bit I/O on the GPIO peripheral, which is apparently not safe
-on MIPS, the IMR can end up containing garbage. This then results in
-interrupt triggers for lines that don't have an interrupt handler
-associated. The irq_desc lookup fails, and the ISR will not be cleared,
-keeping the CPU busy until reboot, or until another IMR operation
-restores the correct value. This situation appears to happen very
-rarely, for < 0.5% of IMR writes.
-
-Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory
-mapped peripheral registers, switch to using 32-bit I/O only, operating
-on the entire bank for all single bit line settings. For 2-bit line
-settings, with 16-bit port values, stick to manual (un)packing.
-
-This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear
-GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48).
-
-Reported-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> # DGS-1210-52
-Reported-by: Birger Koblitz <mail@birger-koblitz.de> # GS728TP
-Reported-by: Jan Hoffmann <jan@3e8.eu> # 1920-16G
-Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support")
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-Cc: Paul Cercueil <paul@crapouillou.net>
-Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
-
-Update patch for missing upstream changes:
-  - commit a01a40e33499 ("gpio: realtek-otto: Make the irqchip immutable")
-  - commit dbd1c54fc820 ("gpio: Bulk conversion to generic_handle_domain_irq()")
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-
----
- drivers/gpio/gpio-realtek-otto.c | 166 ++++++++++++++++---------------
- 1 file changed, 85 insertions(+), 81 deletions(-)
-
---- a/drivers/gpio/gpio-realtek-otto.c
-+++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -46,10 +46,20 @@
-  * @lock: Lock for accessing the IRQ registers and values
-  * @intr_mask: Mask for interrupts lines
-  * @intr_type: Interrupt type selection
-+ * @bank_read: Read a bank setting as a single 32-bit value
-+ * @bank_write: Write a bank setting as a single 32-bit value
-+ * @imr_line_pos: Bit shift of an IRQ line's IMR value.
-+ *
-+ * The DIR, DATA, and ISR registers consist of four 8-bit port values, packed
-+ * into a single 32-bit register. Use @bank_read (@bank_write) to get (assign)
-+ * a value from (to) these registers. The IMR register consists of four 16-bit
-+ * port values, packed into two 32-bit registers. Use @imr_line_pos to get the
-+ * bit shift of the 2-bit field for a line's IMR settings. Shifts larger than
-+ * 32 overflow into the second register.
-  *
-  * Because the interrupt mask register (IMR) combines the function of IRQ type
-  * selection and masking, two extra values are stored. @intr_mask is used to
-- * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store
-+ * mask/unmask the interrupts for a GPIO line, and @intr_type is used to store
-  * the selected interrupt types. The logical AND of these values is written to
-  * IMR on changes.
-  */
-@@ -59,10 +69,11 @@ struct realtek_gpio_ctrl {
- 	void __iomem *cpumask_base;
- 	struct cpumask cpu_irq_maskable;
- 	raw_spinlock_t lock;
--	u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
--	u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
--	unsigned int (*port_offset_u8)(unsigned int port);
--	unsigned int (*port_offset_u16)(unsigned int port);
-+	u8 intr_mask[REALTEK_GPIO_MAX];
-+	u8 intr_type[REALTEK_GPIO_MAX];
-+	u32 (*bank_read)(void __iomem *reg);
-+	void (*bank_write)(void __iomem *reg, u32 value);
-+	unsigned int (*line_imr_pos)(unsigned int line);
- };
- 
- /* Expand with more flags as devices with other quirks are added */
-@@ -101,14 +112,22 @@ static struct realtek_gpio_ctrl *irq_dat
-  * port. The two interrupt mask registers store two bits per GPIO, so use u16
-  * values.
-  */
--static unsigned int realtek_gpio_port_offset_u8(unsigned int port)
-+static u32 realtek_gpio_bank_read_swapped(void __iomem *reg)
-+{
-+	return ioread32be(reg);
-+}
-+
-+static void realtek_gpio_bank_write_swapped(void __iomem *reg, u32 value)
- {
--	return port;
-+	iowrite32be(value, reg);
- }
- 
--static unsigned int realtek_gpio_port_offset_u16(unsigned int port)
-+static unsigned int realtek_gpio_line_imr_pos_swapped(unsigned int line)
- {
--	return 2 * port;
-+	unsigned int port_pin = line % 8;
-+	unsigned int port = line / 8;
-+
-+	return 2 * (8 * (port ^ 1) + port_pin);
- }
- 
- /*
-@@ -119,64 +138,65 @@ static unsigned int realtek_gpio_port_of
-  * per GPIO, so use u16 values. The first register contains ports 1 and 0, the
-  * second ports 3 and 2.
-  */
--static unsigned int realtek_gpio_port_offset_u8_rev(unsigned int port)
-+static u32 realtek_gpio_bank_read(void __iomem *reg)
- {
--	return 3 - port;
-+	return ioread32(reg);
- }
- 
--static unsigned int realtek_gpio_port_offset_u16_rev(unsigned int port)
-+static void realtek_gpio_bank_write(void __iomem *reg, u32 value)
- {
--	return 2 * (port ^ 1);
-+	iowrite32(value, reg);
- }
- 
--static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl,
--	unsigned int port, u16 irq_type, u16 irq_mask)
-+static unsigned int realtek_gpio_line_imr_pos(unsigned int line)
- {
--	iowrite16(irq_type & irq_mask,
--		ctrl->base + REALTEK_GPIO_REG_IMR + ctrl->port_offset_u16(port));
-+	return 2 * line;
- }
- 
--static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl,
--	unsigned int port, u8 mask)
-+static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, u32 mask)
- {
--	iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
-+	ctrl->bank_write(ctrl->base + REALTEK_GPIO_REG_ISR, mask);
- }
- 
--static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port)
-+static u32 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl)
- {
--	return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
-+	return ctrl->bank_read(ctrl->base + REALTEK_GPIO_REG_ISR);
- }
- 
--/* Set the rising and falling edge mask bits for a GPIO port pin */
--static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value)
-+/* Set the rising and falling edge mask bits for a GPIO pin */
-+static void realtek_gpio_update_line_imr(struct realtek_gpio_ctrl *ctrl, unsigned int line)
- {
--	return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin;
-+	void __iomem *reg = ctrl->base + REALTEK_GPIO_REG_IMR;
-+	unsigned int line_shift = ctrl->line_imr_pos(line);
-+	unsigned int shift = line_shift % 32;
-+	u32 irq_type = ctrl->intr_type[line];
-+	u32 irq_mask = ctrl->intr_mask[line];
-+	u32 reg_val;
-+
-+	reg += 4 * (line_shift / 32);
-+	reg_val = ioread32(reg);
-+	reg_val &= ~(REALTEK_GPIO_IMR_LINE_MASK << shift);
-+	reg_val |= (irq_type & irq_mask & REALTEK_GPIO_IMR_LINE_MASK) << shift;
-+	iowrite32(reg_val, reg);
- }
- 
- static void realtek_gpio_irq_ack(struct irq_data *data)
- {
- 	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
- 	irq_hw_number_t line = irqd_to_hwirq(data);
--	unsigned int port = line / 8;
--	unsigned int port_pin = line % 8;
- 
--	realtek_gpio_clear_isr(ctrl, port, BIT(port_pin));
-+	realtek_gpio_clear_isr(ctrl, BIT(line));
- }
- 
- static void realtek_gpio_irq_unmask(struct irq_data *data)
- {
- 	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
- 	unsigned int line = irqd_to_hwirq(data);
--	unsigned int port = line / 8;
--	unsigned int port_pin = line % 8;
- 	unsigned long flags;
--	u16 m;
- 
- 	raw_spin_lock_irqsave(&ctrl->lock, flags);
--	m = ctrl->intr_mask[port];
--	m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
--	ctrl->intr_mask[port] = m;
--	realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
-+	ctrl->intr_mask[line] = REALTEK_GPIO_IMR_LINE_MASK;
-+	realtek_gpio_update_line_imr(ctrl, line);
- 	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
- }
- 
-@@ -184,16 +204,11 @@ static void realtek_gpio_irq_mask(struct
- {
- 	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
- 	unsigned int line = irqd_to_hwirq(data);
--	unsigned int port = line / 8;
--	unsigned int port_pin = line % 8;
- 	unsigned long flags;
--	u16 m;
- 
- 	raw_spin_lock_irqsave(&ctrl->lock, flags);
--	m = ctrl->intr_mask[port];
--	m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
--	ctrl->intr_mask[port] = m;
--	realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
-+	ctrl->intr_mask[line] = 0;
-+	realtek_gpio_update_line_imr(ctrl, line);
- 	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
- }
- 
-@@ -201,10 +216,8 @@ static int realtek_gpio_irq_set_type(str
- {
- 	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
- 	unsigned int line = irqd_to_hwirq(data);
--	unsigned int port = line / 8;
--	unsigned int port_pin = line % 8;
- 	unsigned long flags;
--	u16 type, t;
-+	u8 type;
- 
- 	switch (flow_type & IRQ_TYPE_SENSE_MASK) {
- 	case IRQ_TYPE_EDGE_FALLING:
-@@ -223,11 +236,8 @@ static int realtek_gpio_irq_set_type(str
- 	irq_set_handler_locked(data, handle_edge_irq);
- 
- 	raw_spin_lock_irqsave(&ctrl->lock, flags);
--	t = ctrl->intr_type[port];
--	t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
--	t |= realtek_gpio_imr_bits(port_pin, type);
--	ctrl->intr_type[port] = t;
--	realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]);
-+	ctrl->intr_type[line] = type;
-+	realtek_gpio_update_line_imr(ctrl, line);
- 	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
- 
- 	return 0;
-@@ -238,31 +248,24 @@ static void realtek_gpio_irq_handler(str
- 	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
- 	struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
- 	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
--	unsigned int lines_done;
--	unsigned int port_pin_count;
- 	unsigned int irq;
- 	unsigned long status;
- 	int offset;
- 
- 	chained_irq_enter(irq_chip, desc);
- 
--	for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) {
--		status = realtek_gpio_read_isr(ctrl, lines_done / 8);
--		port_pin_count = min(gc->ngpio - lines_done, 8U);
--		for_each_set_bit(offset, &status, port_pin_count) {
--			irq = irq_find_mapping(gc->irq.domain, offset + lines_done);
--			generic_handle_irq(irq);
--		}
-+	status = realtek_gpio_read_isr(ctrl);
-+	for_each_set_bit(offset, &status, gc->ngpio) {
-+		irq = irq_find_mapping(gc->irq.domain, offset);
-+		generic_handle_irq(irq);
- 	}
- 
- 	chained_irq_exit(irq_chip, desc);
- }
- 
--static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl,
--	unsigned int port, int cpu)
-+static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, int cpu)
- {
--	return ctrl->cpumask_base + ctrl->port_offset_u8(port) +
--		REALTEK_GPIO_PORTS_PER_BANK * cpu;
-+	return ctrl->cpumask_base + REALTEK_GPIO_PORTS_PER_BANK * cpu;
- }
- 
- static int realtek_gpio_irq_set_affinity(struct irq_data *data,
-@@ -270,12 +273,10 @@ static int realtek_gpio_irq_set_affinity
- {
- 	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
- 	unsigned int line = irqd_to_hwirq(data);
--	unsigned int port = line / 8;
--	unsigned int port_pin = line % 8;
- 	void __iomem *irq_cpu_mask;
- 	unsigned long flags;
- 	int cpu;
--	u8 v;
-+	u32 v;
- 
- 	if (!ctrl->cpumask_base)
- 		return -ENXIO;
-@@ -283,15 +284,15 @@ static int realtek_gpio_irq_set_affinity
- 	raw_spin_lock_irqsave(&ctrl->lock, flags);
- 
- 	for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
--		irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu);
--		v = ioread8(irq_cpu_mask);
-+		irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu);
-+		v = ctrl->bank_read(irq_cpu_mask);
- 
- 		if (cpumask_test_cpu(cpu, dest))
--			v |= BIT(port_pin);
-+			v |= BIT(line);
- 		else
--			v &= ~BIT(port_pin);
-+			v &= ~BIT(line);
- 
--		iowrite8(v, irq_cpu_mask);
-+		ctrl->bank_write(irq_cpu_mask, v);
- 	}
- 
- 	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
-@@ -305,22 +306,23 @@ static int realtek_gpio_irq_init(struct
- {
- 	struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
- 	void __iomem *irq_cpu_mask;
--	unsigned int port;
-+	u32 mask_all = GENMASK(gc->ngpio - 1, 0);
-+	unsigned int line;
- 	int cpu;
- 
--	for (port = 0; (port * 8) < gc->ngpio; port++) {
--		realtek_gpio_write_imr(ctrl, port, 0, 0);
--		realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
--
--		/*
--		 * Uniprocessor builds assume a mask always contains one CPU,
--		 * so only start the loop if we have at least one maskable CPU.
--		 */
--		if(!cpumask_empty(&ctrl->cpu_irq_maskable)) {
--			for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
--				irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu);
--				iowrite8(GENMASK(7, 0), irq_cpu_mask);
--			}
-+	for (line = 0; line < gc->ngpio; line++)
-+		realtek_gpio_update_line_imr(ctrl, line);
-+
-+	realtek_gpio_clear_isr(ctrl, mask_all);
-+
-+	/*
-+	 * Uniprocessor builds assume a mask always contains one CPU,
-+	 * so only start the loop if we have at least one maskable CPU.
-+	 */
-+	if(!cpumask_empty(&ctrl->cpu_irq_maskable)) {
-+		for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
-+			irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu);
-+			ctrl->bank_write(irq_cpu_mask, mask_all);
- 		}
- 	}
- 
-@@ -393,12 +395,14 @@ static int realtek_gpio_probe(struct pla
- 
- 	if (dev_flags & GPIO_PORTS_REVERSED) {
- 		bgpio_flags = 0;
--		ctrl->port_offset_u8 = realtek_gpio_port_offset_u8_rev;
--		ctrl->port_offset_u16 = realtek_gpio_port_offset_u16_rev;
-+		ctrl->bank_read = realtek_gpio_bank_read;
-+		ctrl->bank_write = realtek_gpio_bank_write;
-+		ctrl->line_imr_pos = realtek_gpio_line_imr_pos;
- 	} else {
- 		bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
--		ctrl->port_offset_u8 = realtek_gpio_port_offset_u8;
--		ctrl->port_offset_u16 = realtek_gpio_port_offset_u16;
-+		ctrl->bank_read = realtek_gpio_bank_read_swapped;
-+		ctrl->bank_write = realtek_gpio_bank_write_swapped;
-+		ctrl->line_imr_pos = realtek_gpio_line_imr_pos_swapped;
- 	}
- 
- 	err = bgpio_init(&ctrl->gc, dev, 4,
diff --git a/target/linux/realtek/patches-5.10/318-add-rtl83xx-clk-support.patch b/target/linux/realtek/patches-5.10/318-add-rtl83xx-clk-support.patch
deleted file mode 100644
index 94c42308356e..000000000000
--- a/target/linux/realtek/patches-5.10/318-add-rtl83xx-clk-support.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 800d5fb3c6a16661932c932bacd660e38d06b727 Mon Sep 17 00:00:00 2001
-From: Markus Stockhausen <markus.stockhausen@gmx.de>
-Date: Thu, 25 Aug 2022 08:22:36 +0200
-Subject: [PATCH] realtek: add patch to enable new clock driver in kernel
-
-Allow building the clock driver with kernel config options.
-
-Submitted-by: Markus Stockhausen <markus.stockhausen@gmx.de>
----
- drivers/clk/Kconfig                           | 1 +
- drivers/clk/Makefile                          | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/drivers/clk/Kconfig
-+++ b/drivers/clk/Kconfig
-@@ -372,6 +372,7 @@ source "drivers/clk/mediatek/Kconfig"
- source "drivers/clk/meson/Kconfig"
- source "drivers/clk/mvebu/Kconfig"
- source "drivers/clk/qcom/Kconfig"
-+source "drivers/clk/realtek/Kconfig"
- source "drivers/clk/renesas/Kconfig"
- source "drivers/clk/rockchip/Kconfig"
- source "drivers/clk/samsung/Kconfig"
---- a/drivers/clk/Makefile
-+++ b/drivers/clk/Makefile
-@@ -100,6 +100,7 @@ obj-$(CONFIG_COMMON_CLK_NXP)		+= nxp/
- obj-$(CONFIG_MACH_PISTACHIO)		+= pistachio/
- obj-$(CONFIG_COMMON_CLK_PXA)		+= pxa/
- obj-$(CONFIG_COMMON_CLK_QCOM)		+= qcom/
-+obj-$(CONFIG_COMMON_CLK_REALTEK)	+= realtek/
- obj-y					+= renesas/
- obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
- obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
diff --git a/target/linux/realtek/patches-5.10/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch b/target/linux/realtek/patches-5.10/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch
deleted file mode 100644
index bb95e7103a39..000000000000
--- a/target/linux/realtek/patches-5.10/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From 2cd00b51470a30198b048a5fca48a04db77e29cc Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Fri, 21 May 2021 23:16:37 +0900
-Subject: [PATCH] realtek: backport irq-realtek-rtl driver from 5.12 to 5.10
-
-This patch backports "irq-realtek-rtl" driver to Kernel 5.10 from 5.12.
-"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X"
-is used in OpenWrt, so update the dependency by the additional patch.
-
-Submitted-by: INAGAKI Hiroshi <musashino.open@gmail.com>
----
- drivers/irqchip/irq-realtek-rtl.c             | 38 +++++++++++------
- 1 files changed, 58 insertions(+), 20 deletions(-)
-
---- a/drivers/irqchip/irq-realtek-rtl.c
-+++ b/drivers/irqchip/irq-realtek-rtl.c
-@@ -28,6 +28,7 @@ static DEFINE_RAW_SPINLOCK(irq_lock);
- 
- #define REG(offset, cpu)	(realtek_ictl_base[cpu] + offset)
- 
-+static u32 realtek_ictl_unmask[NR_CPUS];
- static void __iomem *realtek_ictl_base[NR_CPUS];
- static cpumask_t realtek_ictl_cpu_configurable;
- 
-@@ -41,11 +42,29 @@ struct realtek_ictl_output {
- };
- 
- /*
-- * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering,
-- * placing IRQ 31 in the first four bits. A routing value of '0' means the
-- * interrupt is left disconnected. Routing values {1..15} connect to output
-- * lines {0..14}.
-+ * Per CPU we have a set of 5 registers that determine interrupt handling for
-+ * 32 external interrupts. GIMR (enable/disable interrupt) plus IRR0-IRR3 that
-+ * contain "routing" or "priority" values. GIMR uses one bit for each interrupt
-+ * and IRRx store 4 bits per interrupt. Realtek uses inverted numbering,
-+ * placing IRQ 31 in the first four bits. The register combinations give the
-+ * following results for a single interrupt in the wild:
-+ *
-+ * a) GIMR = 0 / IRRx > 0 -> no interrupts
-+ * b) GIMR = 0 / IRRx = 0 -> no interrupts
-+ * c) GIMR = 1 / IRRx > 0 -> interrupts
-+ * d) GIMR = 1 / IRRx = 0 -> rare interrupts in SMP environment
-+ *
-+ * Combination d) seems to trigger interrupts only on a VPE if the other VPE
-+ * has GIMR = 0 and IRRx > 0. E.g. busy without interrupts allowed. To provide
-+ * IRQ balancing features in SMP this driver will handle the registers as
-+ * follows:
-+ *
-+ * 1) set IRRx > 0 for VPE where the interrupt is desired
-+ * 2) set IRRx = 0 for VPE where the interrupt is not desired
-+ * 3) set both GIMR = 0 to mask (disabled) interrupt
-+ * 4) set GIMR = 1 to unmask (enable) interrupt but only for VPE where IRRx > 0
-  */
-+
- #define IRR_OFFSET(idx)		(4 * (3 - (idx * 4) / 32))
- #define IRR_SHIFT(idx)		((idx * 4) % 32)
- 
-@@ -65,19 +84,33 @@ static inline void write_irr(void __iome
- 	writel(irr, irr0 + offset);
- }
- 
-+static inline void enable_gimr(int hwirq, int cpu)
-+{
-+	u32 value;
-+
-+	value = readl(REG(RTL_ICTL_GIMR, cpu));
-+	value |= (BIT(hwirq) & realtek_ictl_unmask[cpu]);
-+	writel(value, REG(RTL_ICTL_GIMR, cpu));
-+}
-+
-+static inline void disable_gimr(int hwirq, int cpu)
-+{
-+	u32 value;
-+
-+	value = readl(REG(RTL_ICTL_GIMR, cpu));
-+	value &= ~BIT(hwirq);
-+	writel(value, REG(RTL_ICTL_GIMR, cpu));
-+}
-+
- static void realtek_ictl_unmask_irq(struct irq_data *i)
- {
- 	unsigned long flags;
--	u32 value;
- 	int cpu;
- 
- 	raw_spin_lock_irqsave(&irq_lock, flags);
- 
--	for_each_cpu(cpu, &realtek_ictl_cpu_configurable) {
--		value = readl(REG(RTL_ICTL_GIMR, cpu));
--		value |= BIT(i->hwirq);
--		writel(value, REG(RTL_ICTL_GIMR, cpu));
--	}
-+	for_each_cpu(cpu, &realtek_ictl_cpu_configurable)
-+		enable_gimr(i->hwirq, cpu);
- 
- 	raw_spin_unlock_irqrestore(&irq_lock, flags);
- }
-@@ -85,16 +118,12 @@ static void realtek_ictl_unmask_irq(stru
- static void realtek_ictl_mask_irq(struct irq_data *i)
- {
- 	unsigned long flags;
--	u32 value;
- 	int cpu;
- 
- 	raw_spin_lock_irqsave(&irq_lock, flags);
- 
--	for_each_cpu(cpu, &realtek_ictl_cpu_configurable) {
--		value = readl(REG(RTL_ICTL_GIMR, cpu));
--		value &= ~BIT(i->hwirq);
--		writel(value, REG(RTL_ICTL_GIMR, cpu));
--	}
-+	for_each_cpu(cpu, &realtek_ictl_cpu_configurable)
-+		disable_gimr(i->hwirq, cpu);
- 
- 	raw_spin_unlock_irqrestore(&irq_lock, flags);
- }
-@@ -116,11 +145,17 @@ static int __maybe_unused realtek_ictl_i
- 	cpumask_and(&cpu_enable, &cpu_configure, dest);
- 	cpumask_andnot(&cpu_disable, &cpu_configure, dest);
- 
--	for_each_cpu(cpu, &cpu_disable)
-+	for_each_cpu(cpu, &cpu_disable) {
- 		write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, 0);
-+		realtek_ictl_unmask[cpu] &= ~BIT(i->hwirq);
-+		disable_gimr(i->hwirq, cpu);
-+	}
- 
--	for_each_cpu(cpu, &cpu_enable)
-+	for_each_cpu(cpu, &cpu_enable) {
- 		write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, output->output_index + 1);
-+		realtek_ictl_unmask[cpu] |= BIT(i->hwirq);
-+		enable_gimr(i->hwirq, cpu);
-+	}
- 
- 	irq_data_update_effective_affinity(i, &cpu_enable);
- 
-@@ -149,6 +184,7 @@ static int intc_map(struct irq_domain *d
- 
- 	output->child_mask |= BIT(hw);
- 	write_irr(REG(RTL_ICTL_IRR0, 0), hw, output->output_index + 1);
-+	realtek_ictl_unmask[0] |= BIT(hw);
- 
- 	raw_spin_unlock_irqrestore(&irq_lock, flags);
- 
-@@ -279,9 +315,11 @@ static int __init realtek_rtl_of_init(st
- 			cpumask_set_cpu(cpu, &realtek_ictl_cpu_configurable);
- 
- 			/* Disable all cascaded interrupts and clear routing */
--			writel(0, REG(RTL_ICTL_GIMR, cpu));
--			for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++)
-+			for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++) {
- 				write_irr(REG(RTL_ICTL_IRR0, cpu), soc_irq, 0);
-+				realtek_ictl_unmask[cpu] &= ~BIT(soc_irq);
-+				disable_gimr(soc_irq, cpu);
-+			}
- 		}
- 	}
- 
diff --git a/target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch b/target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch
deleted file mode 100644
index f97ea94d9b8a..000000000000
--- a/target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 26 Nov 2020 12:02:21 +0100
-Subject: net: dsa: Add support for rtl838x switch
-
-* rename the target to realtek
-* add refactored DSA driver
-* add latest gpio driver
-* lots of arch cleanups
-* new irq driver
-* additional boards
-
-Submitted-by: Bert Vermeulen <bert@biot.com>
-Submitted-by: Birger Koblitz <mail@birger-koblitz.de>
-Submitted-by: Sander Vanheule <sander@svanheule.net>
-Submitted-by: Bjørn Mork <bjorn@mork.no>
-Submitted-by: John Crispin <john@phrozen.org>
----
- drivers/net/dsa/rtl83xx/Kconfig               | 2 ++
- drivers/net/dsa/rtl83xx/Makefile              | 1 +
- 2 files changed, 3 insertions(+)
-
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -68,6 +68,8 @@ config NET_DSA_QCA8K
- 	  This enables support for the Qualcomm Atheros QCA8K Ethernet
- 	  switch chips.
- 
-+source "drivers/net/dsa/rtl83xx/Kconfig"
-+
- config NET_DSA_REALTEK_SMI
- 	tristate "Realtek SMI Ethernet switch family support"
- 	depends on NET_DSA
---- a/drivers/net/dsa/Makefile
-+++ b/drivers/net/dsa/Makefile
-@@ -23,3 +23,4 @@ obj-y				+= mv88e6xxx/
- obj-y				+= ocelot/
- obj-y				+= qca/
- obj-y				+= sja1105/
-+obj-y				+= rtl83xx/
diff --git a/target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch b/target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch
deleted file mode 100644
index 27299f17deae..000000000000
--- a/target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 26 Nov 2020 12:02:21 +0100
-Subject: net: dsa: Add rtl838x support for tag trailer
-
-* rename the target to realtek
-* add refactored DSA driver
-* add latest gpio driver
-* lots of arch cleanups
-* new irq driver
-* additional boards
-
-Submitted-by: Bert Vermeulen <bert@biot.com>
-Submitted-by: Birger Koblitz <mail@birger-koblitz.de>
-Submitted-by: Sander Vanheule <sander@svanheule.net>
-Submitted-by: Bjørn Mork <bjorn@mork.no>
-Submitted-by: John Crispin <john@phrozen.org>
----
- net/dsa/tag_trailer.c                         | 16 +++++++++++++-
- 1 file changed, 17 insertions(+), 1 deletion(-)
-
---- a/net/dsa/tag_trailer.c
-+++ b/net/dsa/tag_trailer.c
-@@ -17,7 +17,12 @@ static struct sk_buff *trailer_xmit(stru
- 
- 	trailer = skb_put(skb, 4);
- 	trailer[0] = 0x80;
-+
-+#ifdef CONFIG_NET_DSA_RTL83XX
-+	trailer[1] = dp->index;
-+#else
- 	trailer[1] = 1 << dp->index;
-+#endif /* CONFIG_NET_DSA_RTL838X */
- 	trailer[2] = 0x10;
- 	trailer[3] = 0x00;
- 
-@@ -34,12 +39,23 @@ static struct sk_buff *trailer_rcv(struc
- 		return NULL;
- 
- 	trailer = skb_tail_pointer(skb) - 4;
-+
-+#ifdef CONFIG_NET_DSA_RTL83XX
-+	if (trailer[0] != 0x80 || (trailer[1] & 0x80) != 0x00 ||
-+	    (trailer[2] & 0xef) != 0x00 || trailer[3] != 0x00)
-+		return NULL;
-+
-+	if (trailer[1] & 0x40)
-+		skb->offload_fwd_mark = 1;
-+
-+	source_port = trailer[1] & 0x3f;
-+#else
- 	if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
- 	    (trailer[2] & 0xef) != 0x00 || trailer[3] != 0x00)
- 		return NULL;
- 
- 	source_port = trailer[1] & 7;
--
-+#endif
- 	skb->dev = dsa_master_find_slave(dev, 0, source_port);
- 	if (!skb->dev)
- 		return NULL;
diff --git a/target/linux/realtek/patches-5.10/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch b/target/linux/realtek/patches-5.10/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch
deleted file mode 100644
index 63991d373cd3..000000000000
--- a/target/linux/realtek/patches-5.10/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 26 Nov 2020 12:02:21 +0100
-Subject: net: dsa: Increase max ports for rtl838x
-
-* rename the target to realtek
-* add refactored DSA driver
-* add latest gpio driver
-* lots of arch cleanups
-* new irq driver
-* additional boards
-
-Submitted-by: Bert Vermeulen <bert@biot.com>
-Submitted-by: Birger Koblitz <mail@birger-koblitz.de>
-Submitted-by: Sander Vanheule <sander@svanheule.net>
-Submitted-by: Bjørn Mork <bjorn@mork.no>
-Submitted-by: John Crispin <john@phrozen.org>
----
- include/linux/platform_data/dsa.h             | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/linux/platform_data/dsa.h
-+++ b/include/linux/platform_data/dsa.h
-@@ -6,7 +6,7 @@ struct device;
- struct net_device;
- 
- #define DSA_MAX_SWITCHES	4
--#define DSA_MAX_PORTS		12
-+#define DSA_MAX_PORTS		54
- #define DSA_RTABLE_NONE		-1
- 
- struct dsa_chip_data {
diff --git a/target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch b/target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch
deleted file mode 100644
index 9f50e8b56487..000000000000
--- a/target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 26 Nov 2020 12:02:21 +0100
-Subject: net: ethernet: Add support for RTL838x ethernet
-
-* rename the target to realtek
-* add refactored DSA driver
-* add latest gpio driver
-* lots of arch cleanups
-* new irq driver
-* additional boards
-
-Submitted-by: Bert Vermeulen <bert@biot.com>
-Submitted-by: Birger Koblitz <mail@birger-koblitz.de>
-Submitted-by: Sander Vanheule <sander@svanheule.net>
-Submitted-by: Bjørn Mork <bjorn@mork.no>
-Submitted-by: John Crispin <john@phrozen.org>
----
- drivers/net/ethernet/Kconfig                  | 7 +-
- drivers/net/ethernet/Makefile                 | 1 +
- 2 files changed, 8 insertions(+)
-
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -163,6 +163,13 @@ source "drivers/net/ethernet/rdc/Kconfig
- source "drivers/net/ethernet/realtek/Kconfig"
- source "drivers/net/ethernet/renesas/Kconfig"
- source "drivers/net/ethernet/rocker/Kconfig"
-+
-+config NET_RTL838X
-+	tristate "Realtek rtl838x Ethernet MAC support"
-+	depends on RTL83XX
-+	help
-+	  Say Y here if you want to use the Realtek rtl838x Gbps Ethernet MAC.
-+
- source "drivers/net/ethernet/samsung/Kconfig"
- source "drivers/net/ethernet/seeq/Kconfig"
- source "drivers/net/ethernet/sfc/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -75,6 +75,7 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += real
- obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
- obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
- obj-$(CONFIG_NET_VENDOR_ROCKER) += rocker/
-+obj-$(CONFIG_NET_RTL838X) += rtl838x_eth.o
- obj-$(CONFIG_NET_VENDOR_SAMSUNG) += samsung/
- obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
- obj-$(CONFIG_NET_VENDOR_SILAN) += silan/
diff --git a/target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch b/target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch
deleted file mode 100644
index 8f68dd4e8840..000000000000
--- a/target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 26 Nov 2020 12:02:21 +0100
-Subject: phy: Add PHY ops for rtl838x EEE
-
-* rename the target to realtek
-* add refactored DSA driver
-* add latest gpio driver
-* lots of arch cleanups
-* new irq driver
-* additional boards
-
-Submitted-by: Bert Vermeulen <bert@biot.com>
-Submitted-by: Birger Koblitz <mail@birger-koblitz.de>
-Submitted-by: Sander Vanheule <sander@svanheule.net>
-Submitted-by: Bjørn Mork <bjorn@mork.no>
-Submitted-by: John Crispin <john@phrozen.org>
----
- include/linux/phy.h                           | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -885,6 +885,10 @@ struct phy_driver {
- 	int (*get_sqi)(struct phy_device *dev);
- 	/** @get_sqi_max: Get the maximum signal quality indication */
- 	int (*get_sqi_max)(struct phy_device *dev);
-+	int (*get_port)(struct phy_device *dev);
-+	int (*set_port)(struct phy_device *dev, int port);
-+	int (*get_eee)(struct phy_device *dev, struct ethtool_eee *e);
-+	int (*set_eee)(struct phy_device *dev, struct ethtool_eee *e);
- };
- #define to_phy_driver(d) container_of(to_mdio_common_driver(d),		\
- 				      struct phy_driver, mdiodrv)
diff --git a/target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch b/target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch
deleted file mode 100644
index c46be91fe013..000000000000
--- a/target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 26 Nov 2020 12:02:21 +0100
-Subject: net: phy: EEE support for rtl838x
-
-* rename the target to realtek
-* add refactored DSA driver
-* add latest gpio driver
-* lots of arch cleanups
-* new irq driver
-* additional boards
-
-Submitted-by: Bert Vermeulen <bert@biot.com>
-Submitted-by: Birger Koblitz <mail@birger-koblitz.de>
-Submitted-by: Sander Vanheule <sander@svanheule.net>
-Submitted-by: Bjørn Mork <bjorn@mork.no>
-Submitted-by: John Crispin <john@phrozen.org>
----
- drivers/net/phy/phylink.                      | 14 +++++++++++--
- 1 file changed, 12 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1449,6 +1449,11 @@ int phylink_ethtool_ksettings_set(struct
- 		 *   the presence of a PHY, this should not be changed as that
- 		 *   should be determined from the media side advertisement.
- 		 */
-+		if (pl->phydev->drv->get_port && pl->phydev->drv->set_port) {
-+			if(pl->phydev->drv->get_port(pl->phydev) != kset->base.port) {
-+				pl->phydev->drv->set_port(pl->phydev, kset->base.port);
-+			}
-+		}
- 		return phy_ethtool_ksettings_set(pl->phydev, kset);
- 	}
- 
-@@ -1750,8 +1755,11 @@ int phylink_ethtool_get_eee(struct phyli
- 
- 	ASSERT_RTNL();
- 
--	if (pl->phydev)
-+	if (pl->phydev) {
-+		if (pl->phydev->drv->get_eee)
-+			return pl->phydev->drv->get_eee(pl->phydev, eee);
- 		ret = phy_ethtool_get_eee(pl->phydev, eee);
-+	}
- 
- 	return ret;
- }
-@@ -1768,8 +1776,11 @@ int phylink_ethtool_set_eee(struct phyli
- 
- 	ASSERT_RTNL();
- 
--	if (pl->phydev)
-+	if (pl->phydev) {
-+		if (pl->phydev->drv->set_eee)
-+			return pl->phydev->drv->set_eee(pl->phydev, eee);
- 		ret = phy_ethtool_set_eee(pl->phydev, eee);
-+	}
- 
- 	return ret;
- }
diff --git a/target/linux/realtek/patches-5.10/704-include-linux-add-phy-hsgmii-mode.patch b/target/linux/realtek/patches-5.10/704-include-linux-add-phy-hsgmii-mode.patch
deleted file mode 100644
index 442bff82fae3..000000000000
--- a/target/linux/realtek/patches-5.10/704-include-linux-add-phy-hsgmii-mode.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 9d9bf16aa8d966834ac1280f96c37d22552c33d1 Mon Sep 17 00:00:00 2001
-From: Birger Koblitz <git@birger-koblitz.de>
-Date: Wed, 8 Sep 2021 16:13:18 +0200
-Subject: phy: Add PHY hsgmii mode
-
-This adds RTL93xx-specific MAC configuration routines that allow also configuration
-of 10GBit links for phylink. There is support for the Realtek-specific HISGMI
-protocol.
-
-Submitted-by: Birger Koblitz <git@birger-koblitz.de>
----
- include/linux/phy.h                           | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -134,6 +134,7 @@ typedef enum {
- 	PHY_INTERFACE_MODE_XGMII,
- 	PHY_INTERFACE_MODE_XLGMII,
- 	PHY_INTERFACE_MODE_MOCA,
-+	PHY_INTERFACE_MODE_HSGMII,
- 	PHY_INTERFACE_MODE_QSGMII,
- 	PHY_INTERFACE_MODE_TRGMII,
- 	PHY_INTERFACE_MODE_100BASEX,
-@@ -201,6 +202,8 @@ static inline const char *phy_modes(phy_
- 		return "xlgmii";
- 	case PHY_INTERFACE_MODE_MOCA:
- 		return "moca";
-+	case PHY_INTERFACE_MODE_HSGMII:
-+		return "hsgmii";
- 	case PHY_INTERFACE_MODE_QSGMII:
- 		return "qsgmii";
- 	case PHY_INTERFACE_MODE_TRGMII:
diff --git a/target/linux/realtek/patches-5.10/705-add-rtl-phy.patch b/target/linux/realtek/patches-5.10/705-add-rtl-phy.patch
deleted file mode 100644
index 47041262fc36..000000000000
--- a/target/linux/realtek/patches-5.10/705-add-rtl-phy.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 89f71ebb355c624320c2b0ace8ae9488ff53cbeb Mon Sep 17 00:00:00 2001
-From: Birger Koblitz <mail@birger-koblitz.de>
-Date: Tue, 5 Jan 2021 20:40:52 +0100
-Subject: PHY: Add realtek PHY
-
-This fixes the build problems for the REALTEK target by adding a proper
-configuration option for the phy module.
-
-Submitted-by: Birger Koblitz <mail@birger-koblitz.de>
----
- drivers/net/phy/Kconfig                       | 6 ++++++
- drivers/net/phy/Makefile                      | 1 +
- 2 files changed, 7 insertions(+)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -330,6 +330,12 @@ config REALTEK_PHY
- 	help
- 	  Supports the Realtek 821x PHY.
- 
-+config REALTEK_SOC_PHY
-+	tristate "Realtek SoC PHYs"
-+	depends on RTL83XX
-+	help
-+	  Supports the PHYs found in combination with Realtek Switch SoCs
-+
- config RENESAS_PHY
- 	tristate "Renesas PHYs"
- 	help
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -89,6 +89,7 @@ obj-$(CONFIG_NATIONAL_PHY)	+= national.o
- obj-$(CONFIG_NXP_TJA11XX_PHY)	+= nxp-tja11xx.o
- obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
- obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
-+obj-$(CONFIG_REALTEK_SOC_PHY)   += rtl83xx-phy.o
- obj-$(CONFIG_RENESAS_PHY)	+= uPD60620.o
- obj-$(CONFIG_ROCKCHIP_PHY)	+= rockchip.o
- obj-$(CONFIG_SMSC_PHY)		+= smsc.o
diff --git a/target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch b/target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch
deleted file mode 100644
index bba6fd718285..000000000000
--- a/target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 26 Nov 2020 12:02:21 +0100
-Subject: PHY: Increase max PHY adddress number
-
-* rename the target to realtek
-* add refactored DSA driver
-* add latest gpio driver
-* lots of arch cleanups
-* new irq driver
-* additional boards
-
-Submitted-by: Bert Vermeulen <bert@biot.com>
-Submitted-by: Birger Koblitz <mail@birger-koblitz.de>
-Submitted-by: Sander Vanheule <sander@svanheule.net>
-Submitted-by: Bjørn Mork <bjorn@mork.no>
-Submitted-by: John Crispin <john@phrozen.org>
----
- include/linux/phy.h                           | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -233,7 +233,7 @@ static inline const char *phy_modes(phy_
- #define PHY_INIT_TIMEOUT	100000
- #define PHY_FORCE_TIMEOUT	10
- 
--#define PHY_MAX_ADDR	32
-+#define PHY_MAX_ADDR	64
- 
- /* Used when trying to connect to a specific phy (mii bus id:phy device id) */
- #define PHY_ID_FMT "%s:%02x"
diff --git a/target/linux/realtek/patches-5.10/708-brflood-api.patch b/target/linux/realtek/patches-5.10/708-brflood-api.patch
deleted file mode 100644
index 2716933ae702..000000000000
--- a/target/linux/realtek/patches-5.10/708-brflood-api.patch
+++ /dev/null
@@ -1,162 +0,0 @@
-From afa3ab54c03d5126b14651f367b38165fab5b3cc Mon Sep 17 00:00:00 2001
-From: Birger Koblitz <git@birger-koblitz.de>
-Date: Tue, 18 Jan 2022 17:18:43 +0100
-Subject: net: brflood API
-
-Adds the DSA API for bridge configuration (flooding, L2 learning,
-and aging) offload as found in Linux 5.12 so that we can implement
-it in our drivver.
-
-Submitted-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
-Submitted-by: Birger Koblitz <git@birger-koblitz.de>
----
- include/net/dsa.h                             |  6 +++++++--
- net/dsa/dsa_priv.h                            |  6 +++---
- net/dsa/port.c                                | 28 ++++++++----
- net/dsa/slave.c                               |  6 +++---
- 4 file changed, 29 insertions(+), 13 deletions(-)
-
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -552,8 +552,14 @@ struct dsa_switch_ops {
- 	void	(*port_stp_state_set)(struct dsa_switch *ds, int port,
- 				      u8 state);
- 	void	(*port_fast_age)(struct dsa_switch *ds, int port);
--	int	(*port_egress_floods)(struct dsa_switch *ds, int port,
--				      bool unicast, bool multicast);
-+	int	(*port_pre_bridge_flags)(struct dsa_switch *ds, int port,
-+					 unsigned long flags,
-+					 struct netlink_ext_ack *extack);
-+	int	(*port_bridge_flags)(struct dsa_switch *ds, int port,
-+				     unsigned long flags,
-+				     struct netlink_ext_ack *extack);
-+	int	(*port_set_mrouter)(struct dsa_switch *ds, int port, bool mrouter,
-+				    struct netlink_ext_ack *extack);
- 
- 	/*
- 	 * VLAN support
---- a/net/dsa/dsa_priv.h
-+++ b/net/dsa/dsa_priv.h
-@@ -167,11 +167,11 @@ int dsa_port_mdb_add(const struct dsa_po
- int dsa_port_mdb_del(const struct dsa_port *dp,
- 		     const struct switchdev_obj_port_mdb *mdb);
- int dsa_port_pre_bridge_flags(const struct dsa_port *dp, unsigned long flags,
--			      struct switchdev_trans *trans);
-+			      struct switchdev_trans *trans, struct netlink_ext_ack *extack);
- int dsa_port_bridge_flags(const struct dsa_port *dp, unsigned long flags,
--			  struct switchdev_trans *trans);
-+			  struct switchdev_trans *trans, struct netlink_ext_ack *extack);
- int dsa_port_mrouter(struct dsa_port *dp, bool mrouter,
--		     struct switchdev_trans *trans);
-+		     struct switchdev_trans *trans, struct netlink_ext_ack *extack);
- int dsa_port_vlan_add(struct dsa_port *dp,
- 		      const struct switchdev_obj_port_vlan *vlan,
- 		      struct switchdev_trans *trans);
---- a/net/dsa/port.c
-+++ b/net/dsa/port.c
-@@ -145,7 +145,7 @@ int dsa_port_bridge_join(struct dsa_port
- 	int err;
- 
- 	/* Set the flooding mode before joining the port in the switch */
--	err = dsa_port_bridge_flags(dp, BR_FLOOD | BR_MCAST_FLOOD, NULL);
-+	err = dsa_port_bridge_flags(dp, BR_FLOOD | BR_MCAST_FLOOD, NULL, NULL);
- 	if (err)
- 		return err;
- 
-@@ -158,7 +158,7 @@ int dsa_port_bridge_join(struct dsa_port
- 
- 	/* The bridging is rolled back on error */
- 	if (err) {
--		dsa_port_bridge_flags(dp, 0, NULL);
-+		dsa_port_bridge_flags(dp, 0, NULL, NULL);
- 		dp->bridge_dev = NULL;
- 	}
- 
-@@ -185,7 +185,7 @@ void dsa_port_bridge_leave(struct dsa_po
- 		pr_err("DSA: failed to notify DSA_NOTIFIER_BRIDGE_LEAVE\n");
- 
- 	/* Port is leaving the bridge, disable flooding */
--	dsa_port_bridge_flags(dp, 0, NULL);
-+	dsa_port_bridge_flags(dp, 0, NULL, NULL);
- 
- 	/* Port left the bridge, put in BR_STATE_DISABLED by the bridge layer,
- 	 * so allow it to be in BR_STATE_FORWARDING to be kept functional
-@@ -333,44 +333,44 @@ int dsa_port_ageing_time(struct dsa_port
- }
- 
- int dsa_port_pre_bridge_flags(const struct dsa_port *dp, unsigned long flags,
--			      struct switchdev_trans *trans)
-+			      struct switchdev_trans *trans, struct netlink_ext_ack *extack)
- {
- 	struct dsa_switch *ds = dp->ds;
- 
--	if (!ds->ops->port_egress_floods ||
--	    (flags & ~(BR_FLOOD | BR_MCAST_FLOOD)))
-+	if (!ds->ops->port_pre_bridge_flags)
- 		return -EINVAL;
- 
--	return 0;
-+	return ds->ops->port_pre_bridge_flags(ds, dp->index, flags, extack);
- }
- 
- int dsa_port_bridge_flags(const struct dsa_port *dp, unsigned long flags,
--			  struct switchdev_trans *trans)
-+			  struct switchdev_trans *trans, struct netlink_ext_ack *extack)
- {
- 	struct dsa_switch *ds = dp->ds;
--	int port = dp->index;
--	int err = 0;
- 
- 	if (switchdev_trans_ph_prepare(trans))
- 		return 0;
- 
--	if (ds->ops->port_egress_floods)
--		err = ds->ops->port_egress_floods(ds, port, flags & BR_FLOOD,
--						  flags & BR_MCAST_FLOOD);
-+	if (!ds->ops->port_bridge_flags)
-+		return -EINVAL;
-+ 
-+	return ds->ops->port_bridge_flags(ds, dp->index, flags, extack);
- 
--	return err;
- }
- 
- int dsa_port_mrouter(struct dsa_port *dp, bool mrouter,
--		     struct switchdev_trans *trans)
-+		     struct switchdev_trans *trans,
-+		     struct netlink_ext_ack *extack)
- {
- 	struct dsa_switch *ds = dp->ds;
--	int port = dp->index;
- 
- 	if (switchdev_trans_ph_prepare(trans))
--		return ds->ops->port_egress_floods ? 0 : -EOPNOTSUPP;
-+		return ds->ops->port_set_mrouter ? 0 : -EOPNOTSUPP;
-+
-+	if (!ds->ops->port_set_mrouter)
-+ 		return -EOPNOTSUPP;
- 
--	return ds->ops->port_egress_floods(ds, port, true, mrouter);
-+	return ds->ops->port_set_mrouter(ds, dp->index, mrouter, extack);
- }
- 
- int dsa_port_mtu_change(struct dsa_port *dp, int new_mtu,
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -290,13 +290,13 @@ static int dsa_slave_port_attr_set(struc
- 		break;
- 	case SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS:
- 		ret = dsa_port_pre_bridge_flags(dp, attr->u.brport_flags,
--						trans);
-+						trans, NULL);
- 		break;
- 	case SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS:
--		ret = dsa_port_bridge_flags(dp, attr->u.brport_flags, trans);
-+		ret = dsa_port_bridge_flags(dp, attr->u.brport_flags, trans, NULL);
- 		break;
- 	case SWITCHDEV_ATTR_ID_BRIDGE_MROUTER:
--		ret = dsa_port_mrouter(dp->cpu_dp, attr->u.mrouter, trans);
-+		ret = dsa_port_mrouter(dp->cpu_dp, attr->u.mrouter, trans, NULL);
- 		break;
- 	default:
- 		ret = -EOPNOTSUPP;
diff --git a/target/linux/realtek/patches-5.10/709-lag-offloading.patch b/target/linux/realtek/patches-5.10/709-lag-offloading.patch
deleted file mode 100644
index f84687ff4ac9..000000000000
--- a/target/linux/realtek/patches-5.10/709-lag-offloading.patch
+++ /dev/null
@@ -1,781 +0,0 @@
-From afa3ab54c03d5126b14651f367b38165fab5b3cc Mon Sep 17 00:00:00 2001
-From: Birger Koblitz <git@birger-koblitz.de>
-Date: Tue, 18 Jan 2022 17:18:43 +0100
-Subject: [PATCH] realtek: Backport bridge configuration for DSA
-
-Adds the DSA API for bridge configuration (flooding, L2 learning,
-and aging) offload as found in Linux 5.12 so that we can implement
-it in our drivver.
-
-Submitted-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
-Submitted-by: Birger Koblitz <git@birger-koblitz.de>
----
- drivers/net/bonding/bond_main.c               |  2 ++
- include/net/dsa.h                             | 79 ++++++++++++++++-
- net/dsa/dsa2.c                                | 88 +++++++++++++++++++
- net/dsa/dsa_priv.h                            | 74 ++++++++++++++
- net/dsa/port.c                                | 92 ++++++++++++++++++++
- net/dsa/slave.c                               | 88 ++++++++++++++++---
- net/dsa/switch.c                              | 49 ++++++++++
- net/sda/tag_dsa.c                             | 13 +++++-
- 8 file changed, 460 insertions(+), 25 deletions(-)
-
---- a/drivers/net/bonding/bond_main.c
-+++ b/drivers/net/bonding/bond_main.c
-@@ -2045,6 +2045,8 @@ int bond_enslave(struct net_device *bond
- 		goto err_unregister;
- 	}
- 
-+	bond_lower_state_changed(new_slave);
-+
- 	res = bond_sysfs_slave_add(new_slave);
- 	if (res) {
- 		slave_dbg(bond_dev, slave_dev, "Error %d calling bond_sysfs_slave_add\n", res);
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -149,8 +149,41 @@ struct dsa_switch_tree {
- 
- 	/* List of DSA links composing the routing table */
- 	struct list_head rtable;
-+
-+	/* Maps offloaded LAG netdevs to a zero-based linear ID for
-+	 * drivers that need it.
-+	 */
-+	struct net_device **lags;
-+	unsigned int lags_len;
- };
- 
-+#define dsa_lags_foreach_id(_id, _dst)				\
-+	for ((_id) = 0; (_id) < (_dst)->lags_len; (_id)++)	\
-+		if ((_dst)->lags[(_id)])
-+
-+#define dsa_lag_foreach_port(_dp, _dst, _lag)			\
-+	list_for_each_entry((_dp), &(_dst)->ports, list)	\
-+		if ((_dp)->lag_dev == (_lag))
-+
-+static inline struct net_device *dsa_lag_dev(struct dsa_switch_tree *dst,
-+					     unsigned int id)
-+{
-+	return dst->lags[id];
-+}
-+
-+static inline int dsa_lag_id(struct dsa_switch_tree *dst,
-+			     struct net_device *lag)
-+{
-+	unsigned int id;
-+
-+	dsa_lags_foreach_id(id, dst) {
-+		if (dsa_lag_dev(dst, id) == lag)
-+			return id;
-+	}
-+
-+	return -ENODEV;
-+}
-+
- /* TC matchall action types */
- enum dsa_port_mall_action_type {
- 	DSA_PORT_MALL_MIRROR,
-@@ -220,6 +253,8 @@ struct dsa_port {
- 	bool			devlink_port_setup;
- 	struct phylink		*pl;
- 	struct phylink_config	pl_config;
-+	struct net_device	*lag_dev;
-+	bool			lag_tx_enabled;
- 
- 	struct list_head list;
- 
-@@ -340,6 +375,14 @@ struct dsa_switch {
- 	 */
- 	bool			mtu_enforcement_ingress;
- 
-+	/* Drivers that benefit from having an ID associated with each
-+	 * offloaded LAG should set this to the maximum number of
-+	 * supported IDs. DSA will then maintain a mapping of _at
-+	 * least_ these many IDs, accessible to drivers via
-+	 * dsa_lag_id().
-+	 */
-+	unsigned int		num_lag_ids;
-+
- 	size_t num_ports;
- };
- 
-@@ -432,6 +475,18 @@ static inline bool dsa_port_is_vlan_filt
- 		return dp->vlan_filtering;
- }
- 
-+static inline
-+struct net_device *dsa_port_to_bridge_port(const struct dsa_port *dp)
-+{
-+	if (!dp->bridge_dev)
-+		return NULL;
-+
-+	if (dp->lag_dev)
-+		return dp->lag_dev;
-+
-+	return dp->slave;
-+}
-+
- typedef int dsa_fdb_dump_cb_t(const unsigned char *addr, u16 vid,
- 			      bool is_static, void *data);
- struct dsa_switch_ops {
-@@ -629,6 +684,13 @@ struct dsa_switch_ops {
- 	void	(*crosschip_bridge_leave)(struct dsa_switch *ds, int tree_index,
- 					  int sw_index, int port,
- 					  struct net_device *br);
-+	int	(*crosschip_lag_change)(struct dsa_switch *ds, int sw_index,
-+					int port);
-+	int	(*crosschip_lag_join)(struct dsa_switch *ds, int sw_index,
-+				      int port, struct net_device *lag,
-+				      struct netdev_lag_upper_info *info);
-+	int	(*crosschip_lag_leave)(struct dsa_switch *ds, int sw_index,
-+				       int port, struct net_device *lag);
- 
- 	/*
- 	 * PTP functionality
-@@ -660,6 +722,16 @@ struct dsa_switch_ops {
- 	int	(*port_change_mtu)(struct dsa_switch *ds, int port,
- 				   int new_mtu);
- 	int	(*port_max_mtu)(struct dsa_switch *ds, int port);
-+
-+	/*
-+	 * LAG integration
-+	 */
-+	int	(*port_lag_change)(struct dsa_switch *ds, int port);
-+	int	(*port_lag_join)(struct dsa_switch *ds, int port,
-+				 struct net_device *lag,
-+				 struct netdev_lag_upper_info *info);
-+	int	(*port_lag_leave)(struct dsa_switch *ds, int port,
-+				  struct net_device *lag);
- };
- 
- #define DSA_DEVLINK_PARAM_DRIVER(_id, _name, _type, _cmodes)		\
---- a/net/dsa/dsa.c
-+++ b/net/dsa/dsa.c
-@@ -220,11 +220,21 @@ static int dsa_switch_rcv(struct sk_buff
- 	}
- 
- 	skb = nskb;
--	p = netdev_priv(skb->dev);
- 	skb_push(skb, ETH_HLEN);
- 	skb->pkt_type = PACKET_HOST;
- 	skb->protocol = eth_type_trans(skb, skb->dev);
- 
-+	if (unlikely(!dsa_slave_dev_check(skb->dev))) {
-+		/* Packet is to be injected directly on an upper
-+		 * device, e.g. a team/bond, so skip all DSA-port
-+		 * specific actions.
-+		 */
-+		netif_rx(skb);
-+		return 0;
-+	}
-+
-+	p = netdev_priv(skb->dev);
-+
- 	if (unlikely(cpu_dp->ds->untag_bridge_pvid)) {
- 		nskb = dsa_untag_bridge_pvid(skb);
- 		if (!nskb) {
---- a/net/dsa/dsa2.c
-+++ b/net/dsa/dsa2.c
-@@ -21,6 +21,65 @@
- static DEFINE_MUTEX(dsa2_mutex);
- LIST_HEAD(dsa_tree_list);
- 
-+/**
-+ * dsa_lag_map() - Map LAG netdev to a linear LAG ID
-+ * @dst: Tree in which to record the mapping.
-+ * @lag: Netdev that is to be mapped to an ID.
-+ *
-+ * dsa_lag_id/dsa_lag_dev can then be used to translate between the
-+ * two spaces. The size of the mapping space is determined by the
-+ * driver by setting ds->num_lag_ids. It is perfectly legal to leave
-+ * it unset if it is not needed, in which case these functions become
-+ * no-ops.
-+ */
-+void dsa_lag_map(struct dsa_switch_tree *dst, struct net_device *lag)
-+{
-+	unsigned int id;
-+
-+	if (dsa_lag_id(dst, lag) >= 0)
-+		/* Already mapped */
-+		return;
-+
-+	for (id = 0; id < dst->lags_len; id++) {
-+		if (!dsa_lag_dev(dst, id)) {
-+			dst->lags[id] = lag;
-+			return;
-+		}
-+	}
-+
-+	/* No IDs left, which is OK. Some drivers do not need it. The
-+	 * ones that do, e.g. mv88e6xxx, will discover that dsa_lag_id
-+	 * returns an error for this device when joining the LAG. The
-+	 * driver can then return -EOPNOTSUPP back to DSA, which will
-+	 * fall back to a software LAG.
-+	 */
-+}
-+
-+/**
-+ * dsa_lag_unmap() - Remove a LAG ID mapping
-+ * @dst: Tree in which the mapping is recorded.
-+ * @lag: Netdev that was mapped.
-+ *
-+ * As there may be multiple users of the mapping, it is only removed
-+ * if there are no other references to it.
-+ */
-+void dsa_lag_unmap(struct dsa_switch_tree *dst, struct net_device *lag)
-+{
-+	struct dsa_port *dp;
-+	unsigned int id;
-+
-+	dsa_lag_foreach_port(dp, dst, lag)
-+		/* There are remaining users of this mapping */
-+		return;
-+
-+	dsa_lags_foreach_id(id, dst) {
-+		if (dsa_lag_dev(dst, id) == lag) {
-+			dst->lags[id] = NULL;
-+			break;
-+		}
-+	}
-+}
-+
- struct dsa_switch *dsa_switch_find(int tree_index, int sw_index)
- {
- 	struct dsa_switch_tree *dst;
-@@ -597,6 +656,32 @@ static void dsa_tree_teardown_master(str
- 			dsa_master_teardown(dp->master);
- }
- 
-+static int dsa_tree_setup_lags(struct dsa_switch_tree *dst)
-+{
-+	unsigned int len = 0;
-+	struct dsa_port *dp;
-+
-+	list_for_each_entry(dp, &dst->ports, list) {
-+		if (dp->ds->num_lag_ids > len)
-+			len = dp->ds->num_lag_ids;
-+	}
-+
-+	if (!len)
-+		return 0;
-+
-+	dst->lags = kcalloc(len, sizeof(*dst->lags), GFP_KERNEL);
-+	if (!dst->lags)
-+		return -ENOMEM;
-+
-+	dst->lags_len = len;
-+	return 0;
-+}
-+
-+static void dsa_tree_teardown_lags(struct dsa_switch_tree *dst)
-+{
-+	kfree(dst->lags);
-+}
-+
- static int dsa_tree_setup(struct dsa_switch_tree *dst)
- {
- 	bool complete;
-@@ -624,12 +709,18 @@ static int dsa_tree_setup(struct dsa_swi
- 	if (err)
- 		goto teardown_switches;
- 
-+	err = dsa_tree_setup_lags(dst);
-+	if (err)
-+		goto teardown_master;
-+
- 	dst->setup = true;
- 
- 	pr_info("DSA: tree %d setup\n", dst->index);
- 
- 	return 0;
- 
-+teardown_master:
-+	dsa_tree_teardown_master(dst);
- teardown_switches:
- 	dsa_tree_teardown_switches(dst);
- teardown_default_cpu:
-@@ -645,6 +736,8 @@ static void dsa_tree_teardown(struct dsa
- 	if (!dst->setup)
- 		return;
- 
-+	dsa_tree_teardown_lags(dst);
-+
- 	dsa_tree_teardown_master(dst);
- 
- 	dsa_tree_teardown_switches(dst);
---- a/net/dsa/dsa_priv.h
-+++ b/net/dsa/dsa_priv.h
-@@ -20,6 +20,9 @@ enum {
- 	DSA_NOTIFIER_BRIDGE_LEAVE,
- 	DSA_NOTIFIER_FDB_ADD,
- 	DSA_NOTIFIER_FDB_DEL,
-+	DSA_NOTIFIER_LAG_CHANGE,
-+	DSA_NOTIFIER_LAG_JOIN,
-+	DSA_NOTIFIER_LAG_LEAVE,
- 	DSA_NOTIFIER_MDB_ADD,
- 	DSA_NOTIFIER_MDB_DEL,
- 	DSA_NOTIFIER_VLAN_ADD,
-@@ -57,6 +60,15 @@ struct dsa_notifier_mdb_info {
- 	int port;
- };
- 
-+/* DSA_NOTIFIER_LAG_* */
-+struct dsa_notifier_lag_info {
-+	struct net_device *lag;
-+	int sw_index;
-+	int port;
-+
-+	struct netdev_lag_upper_info *info;
-+};
-+
- /* DSA_NOTIFIER_VLAN_* */
- struct dsa_notifier_vlan_info {
- 	const struct switchdev_obj_port_vlan *vlan;
-@@ -149,6 +161,11 @@ void dsa_port_disable_rt(struct dsa_port
- void dsa_port_disable(struct dsa_port *dp);
- int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br);
- void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br);
-+int dsa_port_lag_change(struct dsa_port *dp,
-+			struct netdev_lag_lower_state_info *linfo);
-+int dsa_port_lag_join(struct dsa_port *dp, struct net_device *lag_dev,
-+		      struct netdev_lag_upper_info *uinfo);
-+void dsa_port_lag_leave(struct dsa_port *dp, struct net_device *lag_dev);
- int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering,
- 			    struct switchdev_trans *trans);
- bool dsa_port_skip_vlan_configuration(struct dsa_port *dp);
-@@ -181,6 +198,71 @@ int dsa_port_link_register_of(struct dsa
- void dsa_port_link_unregister_of(struct dsa_port *dp);
- extern const struct phylink_mac_ops dsa_port_phylink_mac_ops;
- 
-+static inline bool dsa_port_offloads_netdev(struct dsa_port *dp,
-+					    struct net_device *dev)
-+{
-+	/* Switchdev offloading can be configured on: */
-+
-+	if (dev == dp->slave)
-+		/* DSA ports directly connected to a bridge, and event
-+		 * was emitted for the ports themselves.
-+		 */
-+		return true;
-+
-+	if (dp->bridge_dev == dev)
-+		/* DSA ports connected to a bridge, and event was emitted
-+		 * for the bridge.
-+		 */
-+		return true;
-+
-+	if (dp->lag_dev == dev)
-+		/* DSA ports connected to a bridge via a LAG */
-+		return true;
-+
-+	return false;
-+}
-+
-+static inline bool dsa_port_offloads_bridge_port(struct dsa_port *dp,
-+						 struct net_device *dev)
-+{
-+	return dsa_port_to_bridge_port(dp) == dev;
-+}
-+
-+static inline bool dsa_port_offloads_bridge(struct dsa_port *dp,
-+					    struct net_device *bridge_dev)
-+{
-+	/* DSA ports connected to a bridge, and event was emitted
-+	 * for the bridge.
-+	 */
-+	return dp->bridge_dev == bridge_dev;
-+}
-+
-+/* Returns true if any port of this tree offloads the given net_device */
-+static inline bool dsa_tree_offloads_bridge_port(struct dsa_switch_tree *dst,
-+						 struct net_device *dev)
-+{
-+	struct dsa_port *dp;
-+
-+	list_for_each_entry(dp, &dst->ports, list)
-+		if (dsa_port_offloads_bridge_port(dp, dev))
-+			return true;
-+
-+	return false;
-+}
-+
-+/* Returns true if any port of this tree offloads the given net_device */
-+static inline bool dsa_tree_offloads_netdev(struct dsa_switch_tree *dst,
-+					    struct net_device *dev)
-+{
-+	struct dsa_port *dp;
-+
-+	list_for_each_entry(dp, &dst->ports, list)
-+		if (dsa_port_offloads_netdev(dp, dev))
-+			return true;
-+
-+	return false;
-+}
-+
- /* slave.c */
- extern const struct dsa_device_ops notag_netdev_ops;
- void dsa_slave_mii_bus_init(struct dsa_switch *ds);
-@@ -285,6 +367,9 @@ int dsa_switch_register_notifier(struct
- void dsa_switch_unregister_notifier(struct dsa_switch *ds);
- 
- /* dsa2.c */
-+void dsa_lag_map(struct dsa_switch_tree *dst, struct net_device *lag);
-+void dsa_lag_unmap(struct dsa_switch_tree *dst, struct net_device *lag);
-+
- extern struct list_head dsa_tree_list;
- 
- #endif
---- a/net/dsa/port.c
-+++ b/net/dsa/port.c
-@@ -193,6 +193,99 @@ void dsa_port_bridge_leave(struct dsa_po
- 	dsa_port_set_state_now(dp, BR_STATE_FORWARDING);
- }
- 
-+int dsa_port_lag_change(struct dsa_port *dp,
-+			struct netdev_lag_lower_state_info *linfo)
-+{
-+	struct dsa_notifier_lag_info info = {
-+		.sw_index = dp->ds->index,
-+		.port = dp->index,
-+	};
-+	bool tx_enabled;
-+
-+	if (!dp->lag_dev)
-+		return 0;
-+
-+	/* On statically configured aggregates (e.g. loadbalance
-+	 * without LACP) ports will always be tx_enabled, even if the
-+	 * link is down. Thus we require both link_up and tx_enabled
-+	 * in order to include it in the tx set.
-+	 */
-+	tx_enabled = linfo->link_up && linfo->tx_enabled;
-+
-+	if (tx_enabled == dp->lag_tx_enabled)
-+		return 0;
-+
-+	dp->lag_tx_enabled = tx_enabled;
-+
-+	return dsa_port_notify(dp, DSA_NOTIFIER_LAG_CHANGE, &info);
-+}
-+
-+int dsa_port_lag_join(struct dsa_port *dp, struct net_device *lag,
-+		      struct netdev_lag_upper_info *uinfo)
-+{
-+	struct dsa_notifier_lag_info info = {
-+		.sw_index = dp->ds->index,
-+		.port = dp->index,
-+		.lag = lag,
-+		.info = uinfo,
-+	};
-+	struct net_device *bridge_dev;
-+	int err;
-+
-+	dsa_lag_map(dp->ds->dst, lag);
-+	dp->lag_dev = lag;
-+
-+	err = dsa_port_notify(dp, DSA_NOTIFIER_LAG_JOIN, &info);
-+	if (err)
-+		goto err_lag_join;
-+
-+	bridge_dev = netdev_master_upper_dev_get(lag);
-+	if (!bridge_dev || !netif_is_bridge_master(bridge_dev))
-+		return 0;
-+
-+	err = dsa_port_bridge_join(dp, bridge_dev);
-+	if (err)
-+		goto err_bridge_join;
-+
-+	return 0;
-+
-+err_bridge_join:
-+	dsa_port_notify(dp, DSA_NOTIFIER_LAG_LEAVE, &info);
-+err_lag_join:
-+	dp->lag_dev = NULL;
-+	dsa_lag_unmap(dp->ds->dst, lag);
-+	return err;
-+}
-+
-+void dsa_port_lag_leave(struct dsa_port *dp, struct net_device *lag)
-+{
-+	struct dsa_notifier_lag_info info = {
-+		.sw_index = dp->ds->index,
-+		.port = dp->index,
-+		.lag = lag,
-+	};
-+	int err;
-+
-+	if (!dp->lag_dev)
-+		return;
-+
-+	/* Port might have been part of a LAG that in turn was
-+	 * attached to a bridge.
-+	 */
-+	if (dp->bridge_dev)
-+		dsa_port_bridge_leave(dp, dp->bridge_dev);
-+
-+	dp->lag_tx_enabled = false;
-+	dp->lag_dev = NULL;
-+
-+	err = dsa_port_notify(dp, DSA_NOTIFIER_LAG_LEAVE, &info);
-+	if (err)
-+		pr_err("DSA: failed to notify DSA_NOTIFIER_LAG_LEAVE: %d\n",
-+		       err);
-+
-+	dsa_lag_unmap(dp->ds->dst, lag);
-+}
-+
- /* Must be called under rcu_read_lock() */
- static bool dsa_port_can_apply_vlan_filtering(struct dsa_port *dp,
- 					      bool vlan_filtering)
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -337,9 +337,6 @@ static int dsa_slave_vlan_add(struct net
- 	struct switchdev_obj_port_vlan vlan;
- 	int vid, err;
- 
--	if (obj->orig_dev != dev)
--		return -EOPNOTSUPP;
--
- 	if (dsa_port_skip_vlan_configuration(dp))
- 		return 0;
- 
-@@ -394,11 +391,13 @@ static int dsa_slave_port_obj_add(struct
- 
- 	switch (obj->id) {
- 	case SWITCHDEV_OBJ_ID_PORT_MDB:
--		if (obj->orig_dev != dev)
-+		if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev))
- 			return -EOPNOTSUPP;
- 		err = dsa_port_mdb_add(dp, SWITCHDEV_OBJ_PORT_MDB(obj), trans);
- 		break;
- 	case SWITCHDEV_OBJ_ID_HOST_MDB:
-+		if (!dsa_port_offloads_bridge(dp, obj->orig_dev))
-+			return -EOPNOTSUPP;
- 		/* DSA can directly translate this to a normal MDB add,
- 		 * but on the CPU port.
- 		 */
-@@ -406,6 +405,9 @@ static int dsa_slave_port_obj_add(struct
- 				       trans);
- 		break;
- 	case SWITCHDEV_OBJ_ID_PORT_VLAN:
-+		if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev))
-+			return -EOPNOTSUPP;
-+
- 		err = dsa_slave_vlan_add(dev, obj, trans);
- 		break;
- 	default:
-@@ -424,9 +426,6 @@ static int dsa_slave_vlan_del(struct net
- 	struct switchdev_obj_port_vlan *vlan;
- 	int vid, err;
- 
--	if (obj->orig_dev != dev)
--		return -EOPNOTSUPP;
--
- 	if (dsa_port_skip_vlan_configuration(dp))
- 		return 0;
- 
-@@ -453,17 +452,22 @@ static int dsa_slave_port_obj_del(struct
- 
- 	switch (obj->id) {
- 	case SWITCHDEV_OBJ_ID_PORT_MDB:
--		if (obj->orig_dev != dev)
-+		if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev))
- 			return -EOPNOTSUPP;
- 		err = dsa_port_mdb_del(dp, SWITCHDEV_OBJ_PORT_MDB(obj));
- 		break;
- 	case SWITCHDEV_OBJ_ID_HOST_MDB:
-+		if (!dsa_port_offloads_bridge(dp, obj->orig_dev))
-+			return -EOPNOTSUPP;
- 		/* DSA can directly translate this to a normal MDB add,
- 		 * but on the CPU port.
- 		 */
- 		err = dsa_port_mdb_del(dp->cpu_dp, SWITCHDEV_OBJ_PORT_MDB(obj));
- 		break;
- 	case SWITCHDEV_OBJ_ID_PORT_VLAN:
-+		if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev))
-+			return -EOPNOTSUPP;
-+
- 		err = dsa_slave_vlan_del(dev, obj);
- 		break;
- 	default:
-@@ -1993,6 +1997,46 @@ static int dsa_slave_changeupper(struct
- 			dsa_port_bridge_leave(dp, info->upper_dev);
- 			err = NOTIFY_OK;
- 		}
-+	} else if (netif_is_lag_master(info->upper_dev)) {
-+		if (info->linking) {
-+			err = dsa_port_lag_join(dp, info->upper_dev,
-+						info->upper_info);
-+			if (err == -EOPNOTSUPP) {
-+				NL_SET_ERR_MSG_MOD(info->info.extack,
-+						   "Offloading not supported");
-+				err = 0;
-+			}
-+			err = notifier_from_errno(err);
-+		} else {
-+			dsa_port_lag_leave(dp, info->upper_dev);
-+			err = NOTIFY_OK;
-+		}
-+	}
-+
-+	return err;
-+}
-+
-+static int
-+dsa_slave_lag_changeupper(struct net_device *dev,
-+			  struct netdev_notifier_changeupper_info *info)
-+{
-+	struct net_device *lower;
-+	struct list_head *iter;
-+	int err = NOTIFY_DONE;
-+	struct dsa_port *dp;
-+
-+	netdev_for_each_lower_dev(dev, lower, iter) {
-+		if (!dsa_slave_dev_check(lower))
-+			continue;
-+
-+		dp = dsa_slave_to_port(lower);
-+		if (!dp->lag_dev)
-+			/* Software LAG */
-+			continue;
-+
-+		err = dsa_slave_changeupper(lower, info);
-+		if (notifier_to_errno(err))
-+			break;
- 	}
- 
- 	return err;
-@@ -2078,10 +2122,26 @@ static int dsa_slave_netdevice_event(str
- 		break;
- 	}
- 	case NETDEV_CHANGEUPPER:
-+		if (dsa_slave_dev_check(dev))
-+			return dsa_slave_changeupper(dev, ptr);
-+
-+		if (netif_is_lag_master(dev))
-+			return dsa_slave_lag_changeupper(dev, ptr);
-+
-+		break;
-+	case NETDEV_CHANGELOWERSTATE: {
-+		struct netdev_notifier_changelowerstate_info *info = ptr;
-+		struct dsa_port *dp;
-+		int err;
-+
- 		if (!dsa_slave_dev_check(dev))
--			return NOTIFY_DONE;
-+			break;
- 
--		return dsa_slave_changeupper(dev, ptr);
-+		dp = dsa_slave_to_port(dev);
-+
-+		err = dsa_port_lag_change(dp, info->lower_state_info);
-+		return notifier_from_errno(err);
-+	}
- 	}
- 
- 	return NOTIFY_DONE;
-@@ -2229,6 +2289,15 @@ static int dsa_slave_switchdev_event(str
- 			if (!fdb_info->added_by_user &&
- 			    !dp->ds->assisted_learning_on_cpu_port)
- 				return NOTIFY_DONE;
-+
-+			/* When the bridge learns an address on an offloaded
-+			 * LAG we don't want to send traffic to the CPU, the
-+			 * other ports bridged with the LAG should be able to
-+			 * autonomously forward towards it.
-+			 */
-+			if (dsa_tree_offloads_netdev(dp->ds->dst, dev))
-+				return NOTIFY_DONE;
-+
- 		}
- 
- 		if (!dp->ds->ops->port_fdb_add || !dp->ds->ops->port_fdb_del)
---- a/net/dsa/switch.c
-+++ b/net/dsa/switch.c
-@@ -193,6 +193,47 @@ static int dsa_switch_fdb_del(struct dsa
- 	return ds->ops->port_fdb_del(ds, port, info->addr, info->vid);
- }
- 
-+static int dsa_switch_lag_change(struct dsa_switch *ds,
-+				 struct dsa_notifier_lag_info *info)
-+{
-+	if (ds->index == info->sw_index && ds->ops->port_lag_change)
-+		return ds->ops->port_lag_change(ds, info->port);
-+
-+	if (ds->index != info->sw_index && ds->ops->crosschip_lag_change)
-+		return ds->ops->crosschip_lag_change(ds, info->sw_index,
-+						     info->port);
-+
-+	return 0;
-+}
-+
-+static int dsa_switch_lag_join(struct dsa_switch *ds,
-+			       struct dsa_notifier_lag_info *info)
-+{
-+	if (ds->index == info->sw_index && ds->ops->port_lag_join)
-+		return ds->ops->port_lag_join(ds, info->port, info->lag,
-+					      info->info);
-+
-+	if (ds->index != info->sw_index && ds->ops->crosschip_lag_join)
-+		return ds->ops->crosschip_lag_join(ds, info->sw_index,
-+						   info->port, info->lag,
-+						   info->info);
-+
-+	return -EOPNOTSUPP;
-+}
-+
-+static int dsa_switch_lag_leave(struct dsa_switch *ds,
-+				struct dsa_notifier_lag_info *info)
-+{
-+	if (ds->index == info->sw_index && ds->ops->port_lag_leave)
-+		return ds->ops->port_lag_leave(ds, info->port, info->lag);
-+
-+	if (ds->index != info->sw_index && ds->ops->crosschip_lag_leave)
-+		return ds->ops->crosschip_lag_leave(ds, info->sw_index,
-+						    info->port, info->lag);
-+
-+	return -EOPNOTSUPP;
-+}
-+
- static bool dsa_switch_mdb_match(struct dsa_switch *ds, int port,
- 				 struct dsa_notifier_mdb_info *info)
- {
-@@ -340,6 +381,15 @@ static int dsa_switch_event(struct notif
- 	case DSA_NOTIFIER_FDB_DEL:
- 		err = dsa_switch_fdb_del(ds, info);
- 		break;
-+	case DSA_NOTIFIER_LAG_CHANGE:
-+		err = dsa_switch_lag_change(ds, info);
-+		break;
-+	case DSA_NOTIFIER_LAG_JOIN:
-+		err = dsa_switch_lag_join(ds, info);
-+		break;
-+	case DSA_NOTIFIER_LAG_LEAVE:
-+		err = dsa_switch_lag_leave(ds, info);
-+		break;
- 	case DSA_NOTIFIER_MDB_ADD:
- 		err = dsa_switch_mdb_add(ds, info);
- 		break;
---- a/net/dsa/tag_dsa.c
-+++ b/net/dsa/tag_dsa.c
-@@ -82,7 +82,19 @@ static struct sk_buff *dsa_rcv(struct sk
- 	source_device = dsa_header[0] & 0x1f;
- 	source_port = (dsa_header[1] >> 3) & 0x1f;
- 
--	skb->dev = dsa_master_find_slave(dev, source_device, source_port);
-+	if (trunk) {
-+		struct dsa_port *cpu_dp = dev->dsa_ptr;
-+
-+		/* The exact source port is not available in the tag,
-+		 * so we inject the frame directly on the upper
-+		 * team/bond.
-+		 */
-+		skb->dev = dsa_lag_dev(cpu_dp->dst, source_port);
-+	} else {
-+		skb->dev = dsa_master_find_slave(dev, source_device,
-+						 source_port);
-+	}
-+
- 	if (!skb->dev)
- 		return NULL;
- 
diff --git a/target/linux/realtek/patches-5.10/710-net-phy-sfp-re-probe-modules-on-DEV_UP-event.patch b/target/linux/realtek/patches-5.10/710-net-phy-sfp-re-probe-modules-on-DEV_UP-event.patch
deleted file mode 100644
index 53fbbccd55ab..000000000000
--- a/target/linux/realtek/patches-5.10/710-net-phy-sfp-re-probe-modules-on-DEV_UP-event.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From a381ac0aa281fdb0b41a39d8a2bc08fd88f6db92 Mon Sep 17 00:00:00 2001
-From: Antoine Tenart <antoine.tenart@bootlin.com>
-Date: Tue, 25 Feb 2020 16:32:37 +0100
-Subject: [PATCH 1/3] net: phy: sfp: re-probe modules on DEV_UP event
-
-Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
----
- drivers/net/phy/sfp.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1968,6 +1968,13 @@ static void sfp_sm_module(struct sfp *sf
- 		return;
- 	}
- 
-+	/* Re-probe the SFP modules when an interface is brought up, as the MAC
-+	 * do not report its link status (This means Phylink wouldn't be
-+	 * triggered if the PHY had a link before a MAC is brought up).
-+	 */
-+	if (event == SFP_E_DEV_UP && sfp->sm_mod_state == SFP_MOD_PRESENT)
-+		sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
-+
- 	switch (sfp->sm_mod_state) {
- 	default:
- 		if (event == SFP_E_INSERT) {
diff --git a/target/linux/realtek/patches-5.10/711-net-phy-add-an-MDIO-SMBus-library.patch b/target/linux/realtek/patches-5.10/711-net-phy-add-an-MDIO-SMBus-library.patch
deleted file mode 100644
index 5e1053ca6ca7..000000000000
--- a/target/linux/realtek/patches-5.10/711-net-phy-add-an-MDIO-SMBus-library.patch
+++ /dev/null
@@ -1,168 +0,0 @@
-From d585c55b9f70cf9e8c66820d7efe7130c683f19e Mon Sep 17 00:00:00 2001
-From: Antoine Tenart <antoine.tenart@bootlin.com>
-Date: Fri, 21 Feb 2020 11:51:27 +0100
-Subject: [PATCH 2/3] net: phy: add an MDIO SMBus library
-
-Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
----
- drivers/net/mdio/Kconfig      | 11 +++++++
- drivers/net/mdio/Makefile     |  1 +
- drivers/net/mdio/mdio-smbus.c | 62 +++++++++++++++++++++++++++++++++++
- drivers/net/phy/Kconfig       |  1 +
- include/linux/mdio/mdio-i2c.h | 16 +++++++++
- 5 files changed, 91 insertions(+)
- create mode 100644 drivers/net/mdio/mdio-smbus.c
-
---- a/drivers/net/mdio/Kconfig
-+++ b/drivers/net/mdio/Kconfig
-@@ -40,6 +40,17 @@ config MDIO_SUN4I
- 	  interface units of the Allwinner SoC that have an EMAC (A10,
- 	  A12, A10s, etc.)
- 
-+config MDIO_SMBUS
-+	tristate
-+	depends on I2C_SMBUS
-+	help
-+	  Support SMBus based PHYs. This provides a MDIO bus bridged
-+	  to SMBus to allow PHYs connected in SMBus mode to be accessed
-+	  using the existing infrastructure.
-+
-+	  This is library mode.
-+
-+
- config MDIO_XGENE
- 	tristate "APM X-Gene SoC MDIO bus controller"
- 	depends on ARCH_XGENE || COMPILE_TEST
---- a/drivers/net/mdio/Makefile
-+++ b/drivers/net/mdio/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_MDIO_MOXART)		+= mdio-moxar
- obj-$(CONFIG_MDIO_MSCC_MIIM)		+= mdio-mscc-miim.o
- obj-$(CONFIG_MDIO_MVUSB)		+= mdio-mvusb.o
- obj-$(CONFIG_MDIO_OCTEON)		+= mdio-octeon.o
-+obj-$(CONFIG_MDIO_SMBUS)		+= mdio-smbus.o
- obj-$(CONFIG_MDIO_SUN4I)		+= mdio-sun4i.o
- obj-$(CONFIG_MDIO_THUNDER)		+= mdio-thunder.o
- obj-$(CONFIG_MDIO_XGENE)		+= mdio-xgene.o
---- /dev/null
-+++ b/drivers/net/mdio/mdio-smbus.c
-@@ -0,0 +1,62 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * MDIO SMBus bridge
-+ *
-+ * Copyright (C) 2020 Antoine Tenart
-+ *
-+ * Network PHYs can appear on SMBus when they are part of SFP modules.
-+ */
-+#include <linux/i2c.h>
-+#include <linux/phy.h>
-+#include <linux/mdio/mdio-i2c.h>
-+
-+static int smbus_mii_read(struct mii_bus *mii, int phy_id, int reg)
-+{
-+	struct i2c_adapter *i2c = mii->priv;
-+	union i2c_smbus_data data;
-+	int ret;
-+
-+	ret = i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0, I2C_SMBUS_READ,
-+			     reg, I2C_SMBUS_BYTE_DATA, &data);
-+	if (ret < 0)
-+		return 0xff;
-+
-+	return data.byte;
-+}
-+
-+static int smbus_mii_write(struct mii_bus *mii, int phy_id, int reg, u16 val)
-+{
-+	struct i2c_adapter *i2c = mii->priv;
-+	union i2c_smbus_data data;
-+	int ret;
-+
-+	data.byte = val;
-+
-+	ret = i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0, I2C_SMBUS_WRITE,
-+			     reg, I2C_SMBUS_BYTE_DATA, &data);
-+	return ret < 0 ? ret : 0;
-+}
-+
-+struct mii_bus *mdio_smbus_alloc(struct device *parent, struct i2c_adapter *i2c)
-+{
-+	struct mii_bus *mii;
-+
-+	if (!i2c_check_functionality(i2c, I2C_FUNC_SMBUS_BYTE_DATA))
-+		return ERR_PTR(-EINVAL);
-+
-+	mii = mdiobus_alloc();
-+	if (!mii)
-+		return ERR_PTR(-ENOMEM);
-+
-+	snprintf(mii->id, MII_BUS_ID_SIZE, "smbus:%s", dev_name(parent));
-+	mii->parent = parent;
-+	mii->read = smbus_mii_read;
-+	mii->write = smbus_mii_write;
-+	mii->priv = i2c;
-+
-+	return mii;
-+}
-+
-+MODULE_AUTHOR("Antoine Tenart");
-+MODULE_DESCRIPTION("MDIO SMBus bridge library");
-+MODULE_LICENSE("GPL");
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -60,6 +60,7 @@ config SFP
- 	depends on I2C && PHYLINK
- 	depends on HWMON || HWMON=n
- 	select MDIO_I2C
-+	select MDIO_SMBUS
- 
- comment "Switch configuration API + drivers"
- 
---- a/include/linux/mdio/mdio-i2c.h
-+++ b/include/linux/mdio/mdio-i2c.h
-@@ -12,5 +12,21 @@ struct i2c_adapter;
- struct mii_bus;
- 
- struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c);
-+struct mii_bus *mdio_smbus_alloc(struct device *parent, struct i2c_adapter *i2c);
-+
-+/*
-+ * I2C bus addresses 0x50 and 0x51 are normally an EEPROM, which is
-+ * specified to be present in SFP modules.  These correspond with PHY
-+ * addresses 16 and 17.  Disallow access to these "phy" addresses.
-+ */
-+static bool i2c_mii_valid_phy_id(int phy_id)
-+{
-+	return phy_id != 0x10 && phy_id != 0x11;
-+}
-+
-+static unsigned int i2c_mii_phy_addr(int phy_id)
-+{
-+	return phy_id + 0x40;
-+}
- 
- #endif
---- a/drivers/net/mdio/mdio-i2c.c
-+++ b/drivers/net/mdio/mdio-i2c.c
-@@ -13,21 +13,6 @@
- #include <linux/mdio/mdio-i2c.h>
- #include <linux/phy.h>
- 
--/*
-- * I2C bus addresses 0x50 and 0x51 are normally an EEPROM, which is
-- * specified to be present in SFP modules.  These correspond with PHY
-- * addresses 16 and 17.  Disallow access to these "phy" addresses.
-- */
--static bool i2c_mii_valid_phy_id(int phy_id)
--{
--	return phy_id != 0x10 && phy_id != 0x11;
--}
--
--static unsigned int i2c_mii_phy_addr(int phy_id)
--{
--	return phy_id + 0x40;
--}
--
- static int i2c_mii_read(struct mii_bus *bus, int phy_id, int reg)
- {
- 	struct i2c_adapter *i2c = bus->priv;
diff --git a/target/linux/realtek/patches-5.10/712-net-phy-sfp-add-support-for-SMBus.patch b/target/linux/realtek/patches-5.10/712-net-phy-sfp-add-support-for-SMBus.patch
deleted file mode 100644
index e2540d451251..000000000000
--- a/target/linux/realtek/patches-5.10/712-net-phy-sfp-add-support-for-SMBus.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 3cb0bde365d913c484d20224367a54a0eac780a7 Mon Sep 17 00:00:00 2001
-From: Antoine Tenart <antoine.tenart@bootlin.com>
-Date: Fri, 21 Feb 2020 11:55:29 +0100
-Subject: [PATCH 3/3] net: phy: sfp: add support for SMBus
-
-Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
----
- drivers/net/phy/sfp.c | 68 ++++++++++++++++++++++++++++++++++---------
- 1 file changed, 54 insertions(+), 14 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -419,32 +419,72 @@ static int sfp_i2c_write(struct sfp *sfp
- 	return ret == ARRAY_SIZE(msgs) ? len : 0;
- }
- 
-+static int sfp_smbus_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,
-+			  size_t len)
-+{
-+	u8 bus_addr = a2 ? 0x51 : 0x50, *val = buf;
-+
-+	bus_addr -= 0x40;
-+
-+	while (len > 0) {
-+		*val = sfp->i2c_mii->read(sfp->i2c_mii, bus_addr, dev_addr);
-+
-+		val++;
-+		dev_addr++;
-+		len--;
-+	}
-+
-+	return val - (u8 *)buf;
-+}
-+
-+static int sfp_smbus_write(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,
-+			   size_t len)
-+{
-+	u8 bus_addr = a2 ? 0x51 : 0x50;
-+	u16 val;
-+
-+	memcpy(&val, buf, len);
-+
-+	return sfp->i2c_mii->write(sfp->i2c_mii, bus_addr, dev_addr, val);
-+}
-+
- static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
- {
--	struct mii_bus *i2c_mii;
-+	struct mii_bus *mii;
- 	int ret;
- 
--	if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
--		return -EINVAL;
--
- 	sfp->i2c = i2c;
--	sfp->read = sfp_i2c_read;
--	sfp->write = sfp_i2c_write;
- 
--	i2c_mii = mdio_i2c_alloc(sfp->dev, i2c);
--	if (IS_ERR(i2c_mii))
--		return PTR_ERR(i2c_mii);
-+	if (i2c_check_functionality(i2c, I2C_FUNC_I2C)) {
-+		sfp->read = sfp_i2c_read;
-+		sfp->write = sfp_i2c_write;
-+
-+		mii = mdio_i2c_alloc(sfp->dev, i2c);
-+		if (IS_ERR(mii))
-+			return PTR_ERR(mii);
-+
-+		mii->name = "SFP I2C Bus";
-+	} else if (i2c_check_functionality(i2c, I2C_FUNC_SMBUS_BYTE_DATA)) {
-+		sfp->read = sfp_smbus_read;
-+		sfp->write = sfp_smbus_write;
-+
-+		mii = mdio_smbus_alloc(sfp->dev, i2c);
-+		if (IS_ERR(mii))
-+			return PTR_ERR(mii);
- 
--	i2c_mii->name = "SFP I2C Bus";
--	i2c_mii->phy_mask = ~0;
-+		mii->name = "SFP SMBus";
-+	} else {
-+		return -EINVAL;
-+	}
- 
--	ret = mdiobus_register(i2c_mii);
-+	mii->phy_mask = ~0;
-+	ret = mdiobus_register(mii);
- 	if (ret < 0) {
--		mdiobus_free(i2c_mii);
-+		mdiobus_free(mii);
- 		return ret;
- 	}
- 
--	sfp->i2c_mii = i2c_mii;
-+	sfp->i2c_mii = mii;
- 
- 	return 0;
- }
diff --git a/target/linux/realtek/patches-5.10/713-v5.12-net-dsa-configure-better-brport-flags-when-ports-lea.patch b/target/linux/realtek/patches-5.10/713-v5.12-net-dsa-configure-better-brport-flags-when-ports-lea.patch
deleted file mode 100644
index a3bfec59ab7d..000000000000
--- a/target/linux/realtek/patches-5.10/713-v5.12-net-dsa-configure-better-brport-flags-when-ports-lea.patch
+++ /dev/null
@@ -1,148 +0,0 @@
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 12 Feb 2021 17:15:54 +0200
-Subject: [PATCH] net: dsa: configure better brport flags when ports leave the
- bridge
-
-Bugfixed version of upstream commit 5e38c15856e9 ("net: dsa: configure
-better brport flags when ports leave the bridge")
-
-For a DSA switch port operating in standalone mode, address learning
-doesn't make much sense since that is a bridge function. In fact,
-address learning even breaks setups such as this one:
-
-   +---------------------------------------------+
-   |                                             |
-   | +-------------------+                       |
-   | |        br0        |    send      receive  |
-   | +--------+-+--------+ +--------+ +--------+ |
-   | |        | |        | |        | |        | |
-   | |  swp0  | |  swp1  | |  swp2  | |  swp3  | |
-   | |        | |        | |        | |        | |
-   +-+--------+-+--------+-+--------+-+--------+-+
-          |         ^           |          ^
-          |         |           |          |
-          |         +-----------+          |
-          |                                |
-          +--------------------------------+
-
-because if the switch has a single FDB (can offload a single bridge)
-then source address learning on swp3 can "steal" the source MAC address
-of swp2 from br0's FDB, because learning frames coming from swp2 will be
-done twice: first on the swp1 ingress port, second on the swp3 ingress
-port. So the hardware FDB will become out of sync with the software
-bridge, and when swp2 tries to send one more packet towards swp1, the
-ASIC will attempt to short-circuit the forwarding path and send it
-directly to swp3 (since that's the last port it learned that address on),
-which it obviously can't, because swp3 operates in standalone mode.
-
-So DSA drivers operating in standalone mode should still configure a
-list of bridge port flags even when they are standalone. Currently DSA
-attempts to call dsa_port_bridge_flags with 0, which disables egress
-flooding of unknown unicast and multicast, something which doesn't make
-much sense. For the switches that implement .port_egress_floods - b53
-and mv88e6xxx, it probably doesn't matter too much either, since they
-can possibly inject traffic from the CPU into a standalone port,
-regardless of MAC DA, even if egress flooding is turned off for that
-port, but certainly not all DSA switches can do that - sja1105, for
-example, can't. So it makes sense to use a better common default there,
-such as "flood everything".
-
-It should also be noted that what DSA calls "dsa_port_bridge_flags()"
-is a degenerate name for just calling .port_egress_floods(), since
-nothing else is implemented - not learning, in particular. But disabling
-address learning, something that this driver is also coding up for, will
-be supported by individual drivers once .port_egress_floods is replaced
-with a more generic .port_bridge_flags.
-
-Previous attempts to code up this logic have been in the common bridge
-layer, but as pointed out by Ido Schimmel, there are corner cases that
-are missed when doing that:
-https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/
-
-So, at least for now, let's leave DSA in charge of setting port flags
-before and after the bridge join and leave.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-[ backport and bugfix: break dsa_port_bridge_flags() out of loop ]
-Signed-off-by: Bjørn Mork <bjorn@mork.no>
----
- net/dsa/port.c | 45 ++++++++++++++++++++++++++++++++++++++-------
- 1 file changed, 38 insertions(+), 7 deletions(-)
-
---- a/net/dsa/port.c
-+++ b/net/dsa/port.c
-@@ -134,6 +134,27 @@ void dsa_port_disable(struct dsa_port *d
- 	rtnl_unlock();
- }
- 
-+static void dsa_port_change_brport_flags(struct dsa_port *dp,
-+					 bool bridge_offload)
-+{
-+	unsigned long mask, flags;
-+	int flag, err;
-+
-+	mask = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD;
-+	if (bridge_offload)
-+		flags = mask;
-+	else
-+		flags = mask & ~BR_LEARNING;
-+
-+	for_each_set_bit(flag, &mask, 32) {
-+		err = dsa_port_pre_bridge_flags(dp, BIT(flag), NULL, NULL);
-+		if (err)
-+			flags &= ~BIT(flag);
-+	}
-+
-+	dsa_port_bridge_flags(dp, flags, NULL, NULL);
-+}
-+
- int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br)
- {
- 	struct dsa_notifier_bridge_info info = {
-@@ -144,10 +165,10 @@ int dsa_port_bridge_join(struct dsa_port
- 	};
- 	int err;
- 
--	/* Set the flooding mode before joining the port in the switch */
--	err = dsa_port_bridge_flags(dp, BR_FLOOD | BR_MCAST_FLOOD, NULL, NULL);
--	if (err)
--		return err;
-+	/* Notify the port driver to set its configurable flags in a way that
-+	 * matches the initial settings of a bridge port.
-+	 */
-+	dsa_port_change_brport_flags(dp, true);
- 
- 	/* Here the interface is already bridged. Reflect the current
- 	 * configuration so that drivers can program their chips accordingly.
-@@ -158,7 +179,7 @@ int dsa_port_bridge_join(struct dsa_port
- 
- 	/* The bridging is rolled back on error */
- 	if (err) {
--		dsa_port_bridge_flags(dp, 0, NULL, NULL);
-+		dsa_port_change_brport_flags(dp, false);
- 		dp->bridge_dev = NULL;
- 	}
- 
-@@ -184,8 +205,18 @@ void dsa_port_bridge_leave(struct dsa_po
- 	if (err)
- 		pr_err("DSA: failed to notify DSA_NOTIFIER_BRIDGE_LEAVE\n");
- 
--	/* Port is leaving the bridge, disable flooding */
--	dsa_port_bridge_flags(dp, 0, NULL, NULL);
-+	/* Configure the port for standalone mode (no address learning,
-+	 * flood everything).
-+	 * The bridge only emits SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS events
-+	 * when the user requests it through netlink or sysfs, but not
-+	 * automatically at port join or leave, so we need to handle resetting
-+	 * the brport flags ourselves. But we even prefer it that way, because
-+	 * otherwise, some setups might never get the notification they need,
-+	 * for example, when a port leaves a LAG that offloads the bridge,
-+	 * it becomes standalone, but as far as the bridge is concerned, no
-+	 * port ever left.
-+	 */
-+	dsa_port_change_brport_flags(dp, false);
- 
- 	/* Port left the bridge, put in BR_STATE_DISABLED by the bridge layer,
- 	 * so allow it to be in BR_STATE_FORWARDING to be kept functional
diff --git a/target/linux/realtek/patches-5.10/800-net-mdio-support-hardware-assisted-indirect-access.patch b/target/linux/realtek/patches-5.10/800-net-mdio-support-hardware-assisted-indirect-access.patch
deleted file mode 100644
index aca017c03ad2..000000000000
--- a/target/linux/realtek/patches-5.10/800-net-mdio-support-hardware-assisted-indirect-access.patch
+++ /dev/null
@@ -1,840 +0,0 @@
-From 5d84f16b0036b33487b94abef15ad3c224c81ee9 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 3 Feb 2022 16:38:50 +0000
-Subject: [PATCH] net: mdio: support hardware-assisted indirect access
-
-MDIO controllers found in Switch-SoCs can offload some MDIO operations
-to the hardware:
- * MMD register access via Clause-22
-   Instead of using multiple operations to access MMD registers via
-   MII register MII_MMD_CTRL and MII_MMD_DATA some controllers
-   allow transparent access to MMD PHY registers.
-
- * paged MII register access
-   Some PHYs (namely RealTek and Vitesse) use vendor-defined MII
-   register 0x1f for paged access. Some MDIO host controllers support
-   transparent paged access when used with such PHYs.
-
- * add convenience accessors to fully support paged access also on
-   multi-PHY packages (like the embedded PHYs in RTL83xx):
-   phy_package_read_paged and phy_package_write_paged
-   phy_package_port_read and phy_package_port_write
-   phy_package_port_read_paged and phy_package_port_write_paged
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/phy/mdio_bus.c | 335 ++++++++++++++++++++++++++++++++++++-
- drivers/net/phy/phy-core.c |  66 +++++++-
- include/linux/mdio.h       |  59 +++++++
- include/linux/phy.h        | 129 ++++++++++++++
- include/uapi/linux/mii.h   |   1 +
- 5 files changed, 580 insertions(+), 10 deletions(-)
-
---- a/drivers/net/phy/mdio_bus.c
-+++ b/drivers/net/phy/mdio_bus.c
-@@ -739,6 +739,32 @@ out:
- }
- 
- /**
-+ * __mdiobus_select_page - Unlocked version of the mdiobus_select_page function
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @page: register page to select
-+ *
-+ * Selects a MDIO bus register page. Caller must hold the mdio bus lock.
-+ *
-+ * NOTE: MUST NOT be called from interrupt context.
-+ */
-+int __mdiobus_select_page(struct mii_bus *bus, int addr, u16 page)
-+{
-+	lockdep_assert_held_once(&bus->mdio_lock);
-+
-+	if (bus->selected_page[addr] == page)
-+		return 0;
-+
-+	bus->selected_page[addr] = page;
-+	if (bus->read_paged)
-+		return 0;
-+
-+	return bus->write(bus, addr, MII_MAINPAGE, page);
-+
-+}
-+EXPORT_SYMBOL(__mdiobus_select_page);
-+
-+/**
-  * __mdiobus_read - Unlocked version of the mdiobus_read function
-  * @bus: the mii_bus struct
-  * @addr: the phy address
-@@ -754,7 +780,10 @@ int __mdiobus_read(struct mii_bus *bus,
- 
- 	WARN_ON_ONCE(!mutex_is_locked(&bus->mdio_lock));
- 
--	retval = bus->read(bus, addr, regnum);
-+	if (bus->read_paged)
-+		retval = bus->read_paged(bus, addr, bus->selected_page[addr], regnum);
-+	else
-+		retval = bus->read(bus, addr, regnum);
- 
- 	trace_mdio_access(bus, 1, addr, regnum, retval, retval);
- 	mdiobus_stats_acct(&bus->stats[addr], true, retval);
-@@ -764,6 +793,40 @@ int __mdiobus_read(struct mii_bus *bus,
- EXPORT_SYMBOL(__mdiobus_read);
- 
- /**
-+ * __mdiobus_read_paged - Unlocked version of the mdiobus_read_paged function
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @page: the register page to access
-+ * @regnum: register number to read
-+ *
-+ * Read a MDIO bus register. Caller must hold the mdio bus lock.
-+ *
-+ * NOTE: MUST NOT be called from interrupt context.
-+ */
-+int __mdiobus_read_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum)
-+{
-+	int retval;
-+	int oldpage;
-+
-+	lockdep_assert_held_once(&bus->mdio_lock);
-+
-+	if (bus->read_paged) {
-+		retval = bus->read_paged(bus, addr, page, regnum);
-+	} else {
-+		oldpage = bus->selected_page[addr];
-+		__mdiobus_select_page(bus, addr, page);
-+		retval = bus->read(bus, addr, regnum);
-+		__mdiobus_select_page(bus, addr, oldpage);
-+	}
-+
-+	trace_mdio_access(bus, 1, addr, regnum, retval, retval);
-+	mdiobus_stats_acct(&bus->stats[addr], true, retval);
-+
-+	return retval;
-+}
-+EXPORT_SYMBOL(__mdiobus_read_paged);
-+
-+/**
-  * __mdiobus_write - Unlocked version of the mdiobus_write function
-  * @bus: the mii_bus struct
-  * @addr: the phy address
-@@ -780,7 +843,10 @@ int __mdiobus_write(struct mii_bus *bus,
- 
- 	WARN_ON_ONCE(!mutex_is_locked(&bus->mdio_lock));
- 
--	err = bus->write(bus, addr, regnum, val);
-+	if (bus->write_paged)
-+		err = bus->write_paged(bus, addr, bus->selected_page[addr], regnum, val);
-+	else
-+		err = bus->write(bus, addr, regnum, val);
- 
- 	trace_mdio_access(bus, 0, addr, regnum, val, err);
- 	mdiobus_stats_acct(&bus->stats[addr], false, err);
-@@ -790,6 +856,39 @@ int __mdiobus_write(struct mii_bus *bus,
- EXPORT_SYMBOL(__mdiobus_write);
- 
- /**
-+ * __mdiobus_write_paged - Unlocked version of the mdiobus_write_paged function
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @page: the register page to access
-+ * @regnum: register number to write
-+ * @val: value to write to @regnum
-+ *
-+ * Write a MDIO bus register. Caller must hold the mdio bus lock.
-+ *
-+ * NOTE: MUST NOT be called from interrupt context.
-+ */
-+int __mdiobus_write_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum, u16 val)
-+{
-+	int err, oldpage;
-+
-+	lockdep_assert_held_once(&bus->mdio_lock);
-+
-+	if (bus->write_paged) {
-+		err = bus->write_paged(bus, addr, page, regnum, val);
-+	} else {
-+		oldpage = bus->selected_page[addr];
-+		__mdiobus_select_page(bus, addr, page);
-+		err = bus->write(bus, addr, regnum, val);
-+		__mdiobus_select_page(bus, addr, oldpage);
-+	}
-+	trace_mdio_access(bus, 0, addr, regnum, val, err);
-+	mdiobus_stats_acct(&bus->stats[addr], false, err);
-+	return err;
-+}
-+EXPORT_SYMBOL(__mdiobus_write_paged);
-+
-+
-+/**
-  * __mdiobus_modify_changed - Unlocked version of the mdiobus_modify function
-  * @bus: the mii_bus struct
-  * @addr: the phy address
-@@ -822,6 +921,43 @@ int __mdiobus_modify_changed(struct mii_
- EXPORT_SYMBOL_GPL(__mdiobus_modify_changed);
- 
- /**
-+ * __mdiobus_modify_changed_paged - Unlocked version of the mdiobus_modify_paged function
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @regnum: register number to modify
-+ * @mask: bit mask of bits to clear
-+ * @set: bit mask of bits to set
-+ *
-+ * Read, modify, and if any change, write the register value back to the
-+ * device. Any error returns a negative number.
-+ *
-+ * NOTE: MUST NOT be called from interrupt context.
-+ */
-+int __mdiobus_modify_changed_paged(struct mii_bus *bus, int addr, u32 regnum, u16 page,
-+				   u16 mask, u16 set)
-+{
-+	int new, ret, oldpage;
-+
-+	oldpage = bus->selected_page[addr];
-+	__mdiobus_select_page(bus, addr, page);
-+
-+	ret = __mdiobus_read_paged(bus, addr, page, regnum);
-+	if (ret < 0)
-+		return ret;
-+
-+	new = (ret & ~mask) | set;
-+	if (new == ret)
-+		return 0;
-+
-+	ret = __mdiobus_write_paged(bus, addr, page, regnum, new);
-+
-+	__mdiobus_select_page(bus, addr, oldpage);
-+
-+	return ret < 0 ? ret : 1;
-+}
-+EXPORT_SYMBOL_GPL(__mdiobus_modify_changed_paged);
-+
-+/**
-  * mdiobus_read_nested - Nested version of the mdiobus_read function
-  * @bus: the mii_bus struct
-  * @addr: the phy address
-@@ -847,6 +983,79 @@ int mdiobus_read_nested(struct mii_bus *
- EXPORT_SYMBOL(mdiobus_read_nested);
- 
- /**
-+ * mdiobus_select_page_nested - Nested version of the mdiobus_select_page function
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @page: register page to access
-+ *
-+ * In case of nested MDIO bus access avoid lockdep false positives by
-+ * using mutex_lock_nested().
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ */
-+int mdiobus_select_page_nested(struct mii_bus *bus, int addr, u16 page)
-+{
-+	int retval;
-+
-+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	retval = __mdiobus_select_page(bus, addr, page);
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return retval;
-+}
-+EXPORT_SYMBOL(mdiobus_select_page_nested);
-+
-+/**
-+ * mdiobus_read_paged_nested - Nested version of the mdiobus_read_paged function
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @page: register page to access
-+ * @regnum: register number to read
-+ *
-+ * In case of nested MDIO bus access avoid lockdep false positives by
-+ * using mutex_lock_nested().
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ */
-+int mdiobus_read_paged_nested(struct mii_bus *bus, int addr, u16 page, u32 regnum)
-+{
-+	int retval;
-+
-+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	retval = __mdiobus_read_paged(bus, addr, page, regnum);
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return retval;
-+}
-+EXPORT_SYMBOL(mdiobus_read_paged_nested);
-+
-+/**
-+ * mdiobus_select_page - Convenience function for setting the MII register page
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @page: the register page to set
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ */
-+int mdiobus_select_page(struct mii_bus *bus, int addr, u16 page)
-+{
-+	int retval;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	retval = __mdiobus_select_page(bus, addr, page);
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return retval;
-+}
-+EXPORT_SYMBOL(mdiobus_select_page);
-+
-+/**
-  * mdiobus_read - Convenience function for reading a given MII mgmt register
-  * @bus: the mii_bus struct
-  * @addr: the phy address
-@@ -869,6 +1078,29 @@ int mdiobus_read(struct mii_bus *bus, in
- EXPORT_SYMBOL(mdiobus_read);
- 
- /**
-+ * mdiobus_read_paged - Convenience function for reading a given paged MII mgmt register
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @page: register page to access
-+ * @regnum: register number to read
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ */
-+int mdiobus_read_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum)
-+{
-+	int retval;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	retval = __mdiobus_read_paged(bus, addr, page, regnum);
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return retval;
-+}
-+EXPORT_SYMBOL(mdiobus_read_paged);
-+
-+/**
-  * mdiobus_write_nested - Nested version of the mdiobus_write function
-  * @bus: the mii_bus struct
-  * @addr: the phy address
-@@ -895,6 +1127,33 @@ int mdiobus_write_nested(struct mii_bus
- EXPORT_SYMBOL(mdiobus_write_nested);
- 
- /**
-+ * mdiobus_write_paged_nested - Nested version of the mdiobus_write_aged function
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @page: the register page to access
-+ * @regnum: register number to write
-+ * @val: value to write to @regnum
-+ *
-+ * In case of nested MDIO bus access avoid lockdep false positives by
-+ * using mutex_lock_nested().
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ */
-+int mdiobus_write_paged_nested(struct mii_bus *bus, int addr, u16 page, u32 regnum, u16 val)
-+{
-+	int err;
-+
-+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	err = __mdiobus_write_paged(bus, addr, page, regnum, val);
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return err;
-+}
-+EXPORT_SYMBOL(mdiobus_write_paged_nested);
-+
-+/**
-  * mdiobus_write - Convenience function for writing a given MII mgmt register
-  * @bus: the mii_bus struct
-  * @addr: the phy address
-@@ -918,6 +1177,30 @@ int mdiobus_write(struct mii_bus *bus, i
- EXPORT_SYMBOL(mdiobus_write);
- 
- /**
-+ * mdiobus_write_paged - Convenience function for writing a given paged MII mgmt register
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @page: the register page to access
-+ * @regnum: register number to write
-+ * @val: value to write to @regnum
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ */
-+int mdiobus_write_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum, u16 val)
-+{
-+	int err;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	err = __mdiobus_write_paged(bus, addr, page, regnum, val);
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return err;
-+}
-+EXPORT_SYMBOL(mdiobus_write_paged);
-+
-+/**
-  * mdiobus_modify - Convenience function for modifying a given mdio device
-  *	register
-  * @bus: the mii_bus struct
-@@ -939,6 +1222,51 @@ int mdiobus_modify(struct mii_bus *bus,
- EXPORT_SYMBOL_GPL(mdiobus_modify);
- 
- /**
-+ * mdiobus_modify_paged - Convenience function for modifying a given mdio device
-+ *	register
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @page: the register page to access
-+ * @regnum: register number to write
-+ * @mask: bit mask of bits to clear
-+ * @set: bit mask of bits to set
-+ */
-+int mdiobus_modify_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum, u16 mask, u16 set)
-+{
-+	int err;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	err = __mdiobus_modify_changed_paged(bus, addr, page, regnum, mask, set);
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return err < 0 ? err : 0;
-+}
-+EXPORT_SYMBOL_GPL(mdiobus_modify_paged);
-+
-+/**
-+ * mdiobus_modify_changed_paged - Convenience function for modifying a given paged
-+ * mdio device register and returning if it changed
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @page: the register page to access
-+ * @regnum: register number to write
-+ * @mask: bit mask of bits to clear
-+ * @set: bit mask of bits to set
-+ */
-+int mdiobus_modify_changed_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum,
-+				 u16 mask, u16 set)
-+{
-+	int err;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	err = __mdiobus_modify_changed_paged(bus, addr, page, regnum, mask, set);
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return err;
-+}
-+EXPORT_SYMBOL_GPL(mdiobus_modify_changed_paged);
-+
-+/**
-  * mdio_bus_match - determine if given MDIO driver supports the given
-  *		    MDIO device
-  * @dev: target MDIO device
---- a/drivers/net/phy/phy-core.c
-+++ b/drivers/net/phy/phy-core.c
-@@ -481,10 +481,16 @@ int __phy_read_mmd(struct phy_device *ph
- 		struct mii_bus *bus = phydev->mdio.bus;
- 		int phy_addr = phydev->mdio.addr;
- 
--		mmd_phy_indirect(bus, phy_addr, devad, regnum);
--
--		/* Read the content of the MMD's selected register */
--		val = __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
-+		if (bus->access_capabilities & MDIOBUS_ACCESS_C22_MMD) {
-+			val = __mdiobus_c22_mmd_read(phydev->mdio.bus,
-+						     phydev->mdio.addr,
-+						     devad, regnum);
-+		} else {
-+			mmd_phy_indirect(bus, phy_addr, devad, regnum);
-+
-+			/* Read the content of the MMD's selected register */
-+			val = __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
-+		}
- 	}
- 	return val;
- }
-@@ -537,12 +543,18 @@ int __phy_write_mmd(struct phy_device *p
- 		struct mii_bus *bus = phydev->mdio.bus;
- 		int phy_addr = phydev->mdio.addr;
- 
--		mmd_phy_indirect(bus, phy_addr, devad, regnum);
-+		if (bus->access_capabilities & MDIOBUS_ACCESS_C22_MMD) {
-+			ret = __mdiobus_c22_mmd_write(phydev->mdio.bus,
-+						      phydev->mdio.addr,
-+						      devad, regnum, val);
-+		} else {
-+			mmd_phy_indirect(bus, phy_addr, devad, regnum);
- 
--		/* Write the data into MMD's selected register */
--		__mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
-+			/* Write the data into MMD's selected register */
-+			__mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
- 
--		ret = 0;
-+			ret = 0;
-+		}
- 	}
- 	return ret;
- }
-@@ -748,6 +760,13 @@ EXPORT_SYMBOL_GPL(phy_modify_mmd);
- 
- static int __phy_read_page(struct phy_device *phydev)
- {
-+	if (phydev->drv && phydev->drv->flags & PHY_HAS_REALTEK_PAGES) {
-+		struct mii_bus *bus = phydev->mdio.bus;
-+		int phy_addr = phydev->mdio.addr;
-+
-+		return bus->selected_page[phy_addr];
-+	}
-+
- 	if (WARN_ONCE(!phydev->drv->read_page, "read_page callback not available, PHY driver not loaded?\n"))
- 		return -EOPNOTSUPP;
- 
-@@ -756,6 +775,13 @@ static int __phy_read_page(struct phy_de
- 
- static int __phy_write_page(struct phy_device *phydev, int page)
- {
-+	if (phydev->drv && phydev->drv->flags & PHY_HAS_REALTEK_PAGES) {
-+		struct mii_bus *bus = phydev->mdio.bus;
-+		int phy_addr = phydev->mdio.addr;
-+
-+		return __mdiobus_select_page(bus, phy_addr, page);
-+	}
-+
- 	if (WARN_ONCE(!phydev->drv->write_page, "write_page callback not available, PHY driver not loaded?\n"))
- 		return -EOPNOTSUPP;
- 
-@@ -857,6 +883,18 @@ int phy_read_paged(struct phy_device *ph
- {
- 	int ret = 0, oldpage;
- 
-+	if (phydev->drv && phydev->drv->flags & PHY_HAS_REALTEK_PAGES) {
-+		struct mii_bus *bus = phydev->mdio.bus;
-+		int phy_addr = phydev->mdio.addr;
-+
-+		if (bus->read_paged) {
-+			phy_lock_mdio_bus(phydev);
-+			ret = bus->read_paged(bus, phy_addr, page, regnum);
-+			phy_unlock_mdio_bus(phydev);
-+			return ret;
-+		}
-+	}
-+
- 	oldpage = phy_select_page(phydev, page);
- 	if (oldpage >= 0)
- 		ret = __phy_read(phydev, regnum);
-@@ -878,6 +916,18 @@ int phy_write_paged(struct phy_device *p
- {
- 	int ret = 0, oldpage;
- 
-+	if (phydev->drv && phydev->drv->flags & PHY_HAS_REALTEK_PAGES) {
-+		struct mii_bus *bus = phydev->mdio.bus;
-+		int phy_addr = phydev->mdio.addr;
-+
-+		if (bus->write_paged) {
-+			phy_lock_mdio_bus(phydev);
-+			ret = bus->write_paged(bus, phy_addr, page, regnum, val);
-+			phy_unlock_mdio_bus(phydev);
-+			return ret;
-+		}
-+	}
-+
- 	oldpage = phy_select_page(phydev, page);
- 	if (oldpage >= 0)
- 		ret = __phy_write(phydev, regnum, val);
---- a/include/linux/mdio.h
-+++ b/include/linux/mdio.h
-@@ -14,6 +14,7 @@
-  * IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips.
-  */
- #define MII_ADDR_C45		(1<<30)
-+#define MII_ADDR_C22_MMD	(1<<29)
- #define MII_DEVADDR_C45_SHIFT	16
- #define MII_DEVADDR_C45_MASK	GENMASK(20, 16)
- #define MII_REGADDR_C45_MASK	GENMASK(15, 0)
-@@ -327,11 +328,19 @@ static inline void mii_10gbt_stat_mod_li
- 			 advertising, lpa & MDIO_AN_10GBT_STAT_LP10G);
- }
- 
-+int __mdiobus_select_page(struct mii_bus *bus, int addr, u16 page);
- int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
- int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
- int __mdiobus_modify_changed(struct mii_bus *bus, int addr, u32 regnum,
- 			     u16 mask, u16 set);
- 
-+int __mdiobus_read_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum);
-+int __mdiobus_write_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum, u16 val);
-+int __mdiobus_modify_changed_paged(struct mii_bus *bus, int addr, u32 regnum, u16 page,
-+				   u16 mask, u16 set);
-+
-+int mdiobus_select_page(struct mii_bus *bus, int addr, u16 page);
-+int mdiobus_select_page_nested(struct mii_bus *bus, int addr, u16 page);
- int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
- int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum);
- int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
-@@ -339,11 +348,51 @@ int mdiobus_write_nested(struct mii_bus
- int mdiobus_modify(struct mii_bus *bus, int addr, u32 regnum, u16 mask,
- 		   u16 set);
- 
-+int mdiobus_read_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum);
-+int mdiobus_read_nested_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum);
-+int mdiobus_write_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum, u16 val);
-+int mdiobus_write_nested_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum, u16 val);
-+int mdiobus_modify_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum, u16 mask,
-+			 u16 set);
-+int mdiobus_modify_changed_paged(struct mii_bus *bus, int addr, u16 page, u32 regnum,
-+				 u16 mask, u16 set);
-+
-+static inline int mdiodev_read_paged(struct mdio_device *mdiodev, u16 page,
-+				     u32 regnum)
-+{
-+	return mdiobus_read_paged(mdiodev->bus, mdiodev->addr, page, regnum);
-+}
-+
-+static inline int mdiodev_write_paged(struct mdio_device *mdiodev, u16 page,
-+				      u32 regnum, u16 val)
-+{
-+	return mdiobus_write_paged(mdiodev->bus, mdiodev->addr, page, regnum, val);
-+}
-+
-+static inline int mdiodev_modify_paged(struct mdio_device *mdiodev, u16 page,
-+				       u32 regnum, u16 mask, u16 set)
-+{
-+	return mdiobus_modify_paged(mdiodev->bus, mdiodev->addr, page, regnum,
-+				    mask, set);
-+}
-+
-+static inline int mdiodev_modify_changed_paged(struct mdio_device *mdiodev, u16 page,
-+					       u32 regnum, u16 mask, u16 set)
-+{
-+	return mdiobus_modify_changed_paged(mdiodev->bus, mdiodev->addr, page, regnum,
-+					    mask, set);
-+}
-+
- static inline u32 mdiobus_c45_addr(int devad, u16 regnum)
- {
- 	return MII_ADDR_C45 | devad << MII_DEVADDR_C45_SHIFT | regnum;
- }
- 
-+static inline u32 mdiobus_c22_mmd_addr(int devad, u16 regnum)
-+{
-+	return MII_ADDR_C22_MMD | devad << MII_DEVADDR_C45_SHIFT | regnum;
-+}
-+
- static inline u16 mdiobus_c45_regad(u32 regnum)
- {
- 	return FIELD_GET(MII_REGADDR_C45_MASK, regnum);
-@@ -367,6 +416,19 @@ static inline int __mdiobus_c45_write(st
- 			       val);
- }
- 
-+static inline int __mdiobus_c22_mmd_read(struct mii_bus *bus, int prtad,
-+					 int devad, u16 regnum)
-+{
-+	return __mdiobus_read(bus, prtad, mdiobus_c22_mmd_addr(devad, regnum));
-+}
-+
-+static inline int __mdiobus_c22_mmd_write(struct mii_bus *bus, int prtad,
-+					  int devad, u16 regnum, u16 val)
-+{
-+	return __mdiobus_write(bus, prtad, mdiobus_c22_mmd_addr(devad, regnum),
-+			       val);
-+}
-+
- static inline int mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad,
- 				   u16 regnum)
- {
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -80,6 +80,7 @@ extern const int phy_10gbit_features_arr
- #define PHY_IS_INTERNAL		0x00000001
- #define PHY_RST_AFTER_CLK_EN	0x00000002
- #define PHY_POLL_CABLE_TEST	0x00000004
-+#define PHY_HAS_REALTEK_PAGES	0x00000010
- #define MDIO_DEVICE_IS_PHY	0x80000000
- 
- /**
-@@ -374,6 +375,22 @@ struct mii_bus {
- 
- 	/** @shared: shared state across different PHYs */
- 	struct phy_package_shared *shared[PHY_MAX_ADDR];
-+
-+	/** @access_capabilities: hardware-assisted access capabilties */
-+	enum {
-+		MDIOBUS_ACCESS_SOFTWARE_ONLY = 0,
-+		MDIOBUS_ACCESS_C22_MMD = 0x1,
-+	} access_capabilities;
-+
-+	/** @read: Perform a read transfer on the bus, offloading page access */
-+	int (*read_paged)(struct mii_bus *bus, int addr, u16 page, int regnum);
-+	/** @write: Perform a write transfer on the bus, offloading page access */
-+	int (*write_paged)(struct mii_bus *bus, int addr, u16 page, int regnum, u16 val);
-+	/** currently selected page when page access is offloaded
-+	 * array should be PHY_MAX_ADDR+1size, but current design of the MDIO driver
-+	 * uses port addresses as phy addresses and they are up to 6 bit.
-+	 */
-+	u16 selected_page[64];
- };
- #define to_mii_bus(d) container_of(d, struct mii_bus, dev)
- 
-@@ -1651,6 +1668,66 @@ static inline int __phy_package_read(str
- 	return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum);
- }
- 
-+static inline int phy_package_read_port(struct phy_device *phydev, u16 port, u32 regnum)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+
-+	if (!shared)
-+		return -EIO;
-+
-+	return mdiobus_read(phydev->mdio.bus, shared->addr + port, regnum);
-+}
-+
-+static inline int __phy_package_read_port(struct phy_device *phydev, u16 port, u32 regnum)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+
-+	if (!shared)
-+		return -EIO;
-+
-+	return __mdiobus_read(phydev->mdio.bus, shared->addr + port, regnum);
-+}
-+
-+static inline int phy_package_read_paged(struct phy_device *phydev, u16 page, u32 regnum)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+
-+	if (!shared)
-+		return -EIO;
-+
-+	return mdiobus_read_paged(phydev->mdio.bus, shared->addr, page, regnum);
-+}
-+
-+static inline int __phy_package_read_paged(struct phy_device *phydev, u16 page, u32 regnum)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+
-+	if (!shared)
-+		return -EIO;
-+
-+	return __mdiobus_read_paged(phydev->mdio.bus, shared->addr, page, regnum);
-+}
-+
-+static inline int phy_package_port_read_paged(struct phy_device *phydev, u16 port, u16 page, u32 regnum)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+
-+	if (!shared)
-+		return -EIO;
-+
-+	return mdiobus_read_paged(phydev->mdio.bus, shared->addr + port, page, regnum);
-+}
-+
-+static inline int __phy_package_port_read_paged(struct phy_device *phydev, u16 port, u16 page, u32 regnum)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+
-+	if (!shared)
-+		return -EIO;
-+
-+	return __mdiobus_read_paged(phydev->mdio.bus, shared->addr + port, page, regnum);
-+}
-+
- static inline int phy_package_write(struct phy_device *phydev,
- 				    u32 regnum, u16 val)
- {
-@@ -1673,6 +1750,72 @@ static inline int __phy_package_write(st
- 	return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val);
- }
- 
-+static inline int phy_package_port_write(struct phy_device *phydev,
-+				         u16 port, u32 regnum, u16 val)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+
-+	if (!shared)
-+		return -EIO;
-+
-+	return mdiobus_write(phydev->mdio.bus, shared->addr + port, regnum, val);
-+}
-+
-+static inline int __phy_package_port_write(struct phy_device *phydev,
-+				      u16 port, u32 regnum, u16 val)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+
-+	if (!shared)
-+		return -EIO;
-+
-+	return __mdiobus_write(phydev->mdio.bus, shared->addr + port, regnum, val);
-+}
-+
-+static inline int phy_package_port_write_paged(struct phy_device *phydev,
-+					u16 port, u16 page, u32 regnum, u16 val)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+
-+	if (!shared)
-+		return -EIO;
-+
-+	return mdiobus_write_paged(phydev->mdio.bus, shared->addr + port, page, regnum, val);
-+}
-+
-+static inline int __phy_package_port_write_paged(struct phy_device *phydev,
-+					u16 port, u16 page, u32 regnum, u16 val)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+
-+	if (!shared)
-+		return -EIO;
-+
-+	return __mdiobus_write_paged(phydev->mdio.bus, shared->addr + port, page, regnum, val);
-+}
-+
-+static inline int phy_package_write_paged(struct phy_device *phydev,
-+					  u16 page, u32 regnum, u16 val)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+
-+	if (!shared)
-+		return -EIO;
-+
-+	return mdiobus_write_paged(phydev->mdio.bus, shared->addr, page, regnum, val);
-+}
-+
-+static inline int __phy_package_write_paged(struct phy_device *phydev,
-+					  u16 page, u32 regnum, u16 val)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+
-+	if (!shared)
-+		return -EIO;
-+
-+	return __mdiobus_write_paged(phydev->mdio.bus, shared->addr, page, regnum, val);
-+}
-+
- static inline bool __phy_package_set_once(struct phy_device *phydev,
- 					  unsigned int b)
- {
---- a/include/uapi/linux/mii.h
-+++ b/include/uapi/linux/mii.h
-@@ -36,6 +36,7 @@
- #define MII_RESV2		0x1a	/* Reserved...                 */
- #define MII_TPISTATUS		0x1b	/* TPI status for 10mbps       */
- #define MII_NCONFIG		0x1c	/* Network interface config    */
-+#define MII_MAINPAGE		0x1f	/* Page register               */
- 
- /* Basic mode control register. */
- #define BMCR_RESV		0x003f	/* Unused...                   */
diff --git a/target/linux/realtek/rtl838x/config-5.10 b/target/linux/realtek/rtl838x/config-5.10
deleted file mode 100644
index e763557a9f4f..000000000000
--- a/target/linux/realtek/rtl838x/config-5.10
+++ /dev/null
@@ -1,227 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BMIPS_CPUFREQ is not set
-# CONFIG_CEVT_R4K is not set
-# CONFIG_CEVT_RTL9300 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-CONFIG_COMMON_CLK_REALTEK=y
-CONFIG_COMMON_CLK_RTL83XX=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_CPUFREQ=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_RNG2=y
-CONFIG_DEBUG_SECTION_MISMATCH=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EARLY_PRINTK_8250=y
-CONFIG_EXTRA_FIRMWARE="rtl838x_phy/rtl838x_8214fc.fw rtl838x_phy/rtl838x_8218b.fw rtl838x_phy/rtl838x_8380.fw"
-CONFIG_EXTRA_FIRMWARE_DIR="firmware"
-CONFIG_FIXED_PHY=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_REALTEK_OTTO=y
-CONFIG_GPIO_RTL8231=y
-CONFIG_GPIO_WATCHDOG=y
-# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HWMON=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_MUX=y
-# CONFIG_I2C_RTL9300 is not set
-# CONFIG_I2C_MUX_RTL9300 is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_I2C=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_EXTERNAL_TIMER=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_BRNIMAGE_FW=y
-CONFIG_MTD_SPLIT_EVA_FW=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_H3C_VFS=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_VIRT_CONCAT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_RTL83XX=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-CONFIG_NET_RTL838X=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PINCTRL=y
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_RATIONAL=y
-CONFIG_REALTEK_OTTO_TIMER=y
-CONFIG_REALTEK_OTTO_WDT=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REALTEK_SOC_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RTL83XX=y
-CONFIG_RTL838X=y
-# CONFIG_RTL839X is not set
-# CONFIG_RTL930X is not set
-# CONFIG_RTL931X is not set
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SFP=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/realtek/rtl839x/config-5.10 b/target/linux/realtek/rtl839x/config-5.10
deleted file mode 100644
index d464c722251e..000000000000
--- a/target/linux/realtek/rtl839x/config-5.10
+++ /dev/null
@@ -1,223 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BMIPS_CPUFREQ is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-CONFIG_COMMON_CLK_REALTEK=y
-CONFIG_COMMON_CLK_RTL83XX=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_CPUFREQ=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_DEBUG_SECTION_MISMATCH=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EARLY_PRINTK_8250=y
-CONFIG_FIXED_PHY=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_REALTEK_OTTO=y
-CONFIG_GPIO_RTL8231=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HWMON=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_RTL9300 is not set
-# CONFIG_I2C_MUX_RTL9300 is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LLD_VERSION=0
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_I2C=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_EXTERNAL_TIMER=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_MT_SMP=y
-# CONFIG_MIPS_MT_FPAFF is not set
-CONFIG_NR_CPUS=2
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_BRNIMAGE_FW=y
-CONFIG_MTD_SPLIT_EVA_FW=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_VIRT_CONCAT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_RTL83XX=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-CONFIG_NET_RTL838X=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PINCTRL=y
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_RATIONAL=y
-CONFIG_REALTEK_OTTO_TIMER=y
-CONFIG_REALTEK_OTTO_WDT=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REALTEK_SOC_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RTL83XX=y
-# CONFIG_RTL838X is not set
-CONFIG_RTL839X=y
-# CONFIG_RTL930X is not set
-# CONFIG_RTL931X is not set
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SFP=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/realtek/rtl930x/config-5.10 b/target/linux/realtek/rtl930x/config-5.10
deleted file mode 100644
index f61a200c9141..000000000000
--- a/target/linux/realtek/rtl930x/config-5.10
+++ /dev/null
@@ -1,210 +0,0 @@
-CONFIG_AQUANTIA_PHY=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_CEVT_RTL9300=y
-# CONFIG_CEVT_R4K is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-# CONFIG_COMMON_CLK_REALTEK is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_SECTION_MISMATCH=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EARLY_PRINTK_8250=y
-CONFIG_FIXED_PHY=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_REALTEK_OTTO=y
-CONFIG_GPIO_RTL8231=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HWMON=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_RTL9300=y
-CONFIG_I2C_RTL9300=y
-CONFIG_I2C_SMBUS=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LLD_VERSION=0
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_I2C=y
-CONFIG_MDIO_SMBUS=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_FPAFF is not set
-CONFIG_NR_CPUS=2
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_BRNIMAGE_FW=y
-CONFIG_MTD_SPLIT_EVA_FW=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_RTL83XX=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-CONFIG_NET_RTL838X=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PINCTRL=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_RATIONAL=y
-# CONFIG_REALTEK_OTTO_TIMER is not set
-CONFIG_REALTEK_OTTO_WDT=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REALTEK_SOC_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RTL83XX=y
-# CONFIG_RTL838X is not set
-# CONFIG_RTL839X is not set
-CONFIG_RTL930X=y
-# CONFIG_RTL931X is not set
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SFP=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/realtek/rtl931x/config-5.10 b/target/linux/realtek/rtl931x/config-5.10
deleted file mode 100644
index 36e748680476..000000000000
--- a/target/linux/realtek/rtl931x/config-5.10
+++ /dev/null
@@ -1,224 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-# CONFIG_COMMON_CLK_REALTEK is not set
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_DIEI=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_NR_CPU_NR_MAP=4
-CONFIG_HIGHMEM=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_SECTION_MISMATCH=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_REALTEK_OTTO=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_RTL8231=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HWMON=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_RTL9300=y
-CONFIG_I2C_RTL9300=y
-CONFIG_I2C_SMBUS=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LLD_VERSION=0
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_I2C=y
-CONFIG_MDIO_SMBUS=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_LD_CAN_LINK_VDSO=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_BRNIMAGE_FW=y
-CONFIG_MTD_SPLIT_EVA_FW=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_RTL83XX=y
-CONFIG_NET_DSA_TAG_RTL83XX=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-CONFIG_NET_RTL838X=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PINCTRL=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_RATIONAL=y
-# CONFIG_REALTEK_OTTO_TIMER is not set
-# CONFIG_REALTEK_PHY is not set
-CONFIG_REALTEK_SOC_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RTL838X=y
-# CONFIG_RTL9300_TIMER is not set
-CONFIG_SENSORS_GPIO_FAN=y
-CONFIG_SENSORS_LM75=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SFP=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TARGET_ISA_REV=2
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-# CONFIG_USE_GENERIC_EARLY_PRINTK_8250 is not set
-CONFIG_USE_OF=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_MIPS_CPU_SCACHE=y
-CONFIG_SPI_RTL838X=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_MIPS_CPC=y
-CONFIG_MIPS_CPS=y
-CONFIG_MIPS_PM=y
-# CONFIG_MIPS_CMP is not set
-CONFIG_MIPS_CPS_CPUIDLE=y
-# CONFIG_MIPS_CPS_NS16550_BOOL is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_RTL83XX=y
-# CONFIG_RTL838X is not set
-# CONFIG_RTL839X is not set
-CONFIG_RTL930X=y
-CONFIG_RTL931X=y
-CONFIG_REALTEK_OTTO_WDT=y
diff --git a/target/linux/rockchip/armv8/config-5.10 b/target/linux/rockchip/armv8/config-5.10
deleted file mode 100644
index 637c54be6f14..000000000000
--- a/target/linux/rockchip/armv8/config-5.10
+++ /dev/null
@@ -1,644 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=33
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_ROCKCHIP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARC_EMAC_CORE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CNP=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_ERRATUM_845719=y
-CONFIG_ARM64_ERRATUM_858921=y
-CONFIG_ARM64_HW_AFDBM=y
-CONFIG_ARM64_MODULE_PLTS=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_RAS_EXTN=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=48
-# CONFIG_ARM64_VA_BITS_39 is not set
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_ARM64_VHE=y
-CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
-# CONFIG_ARMV8_DEPRECATED is not set
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_MHU=y
-CONFIG_ARM_PSCI_CPUIDLE=y
-CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set
-# CONFIG_ARM_SCMI_PROTOCOL is not set
-CONFIG_ARM_SCPI_CPUFREQ=y
-CONFIG_ARM_SCPI_POWER_DOMAIN=y
-CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_ARM_SMMU=y
-CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y
-# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
-CONFIG_ARM_SMMU_V3=y
-# CONFIG_ARM_SMMU_V3_SVA is not set
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GPIO=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_BLK_DEV_INTEGRITY_T10=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BLOCK_COMPAT=y
-CONFIG_BRCMSTB_GISB_ARB=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_CHARGER_BQ25980 is not set
-CONFIG_CHARGER_GPIO=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLK_PX30=y
-CONFIG_CLK_RK3036=y
-CONFIG_CLK_RK312X=y
-CONFIG_CLK_RK3188=y
-CONFIG_CLK_RK322X=y
-CONFIG_CLK_RK3308=y
-CONFIG_CLK_RK3328=y
-CONFIG_CLK_RK3368=y
-CONFIG_CLK_RK3399=y
-CONFIG_CLK_RV110X=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=5
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_RK808=y
-CONFIG_COMMON_CLK_ROCKCHIP=y
-CONFIG_COMMON_CLK_SCPI=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_ISOLATION=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRASH_DUMP=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
-CONFIG_CRYPTO_CRYPTD=y
-# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEVFREQ_GOV_PASSIVE is not set
-CONFIG_DEVFREQ_GOV_PERFORMANCE=y
-CONFIG_DEVFREQ_GOV_POWERSAVE=y
-CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
-CONFIG_DEVFREQ_GOV_USERSPACE=y
-# CONFIG_DEVFREQ_THERMAL is not set
-CONFIG_DEVMEM=y
-# CONFIG_DEVPORT is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DNOTIFY=y
-# CONFIG_DRM_ROCKCHIP is not set
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DWMAC_DWC_QOS_ETH=y
-CONFIG_DWMAC_GENERIC=y
-CONFIG_DWMAC_ROCKCHIP=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EMAC_ROCKCHIP=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_ENERGY_MODEL=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_FORTIFY_SOURCE is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_DWAPB=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-# CONFIG_HISI_HIKEY_USB is not set
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_HWMON=y
-CONFIG_HWSPINLOCK=y
-CONFIG_HW_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_RK3X=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INDIRECT_PIO=y
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_LEDS=y
-CONFIG_INPUT_MATRIXKMAP=y
-# CONFIG_INPUT_RK805_PWRKEY is not set
-CONFIG_IOMMU_API=y
-# CONFIG_IOMMU_DEBUGFS is not set
-CONFIG_IOMMU_DMA=y
-CONFIG_IOMMU_IOVA=y
-CONFIG_IOMMU_IO_PGTABLE=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-CONFIG_IOMMU_IO_PGTABLE_LPAE=y
-# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
-CONFIG_IOMMU_SUPPORT=y
-# CONFIG_IO_STRICT_DEVMEM is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MSI_IOMMU=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JUMP_LABEL=y
-CONFIG_KALLSYMS=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEXEC_FILE=y
-CONFIG_KSM=y
-# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_LP50XX is not set
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_PANIC=y
-CONFIG_LIBCRC32C=y
-CONFIG_LIBFDT=y
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAGIC_SYSRQ_SERIAL=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MDIO_BUS_MUX_GPIO=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_KHADAS_MCU is not set
-CONFIG_MFD_RK808=y
-# CONFIG_MFD_ROHM_BD71828 is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_DW=y
-# CONFIG_MMC_DW_BLUEFIELD is not set
-# CONFIG_MMC_DW_EXYNOS is not set
-# CONFIG_MMC_DW_HI3798CV200 is not set
-# CONFIG_MMC_DW_K3 is not set
-# CONFIG_MMC_DW_PCI is not set
-CONFIG_MMC_DW_PLTFM=y
-CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF_ARASAN=y
-CONFIG_MMC_SDHCI_OF_DWCMSHC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MQ_IOSCHED_DEADLINE=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=256
-CONFIG_NVMEM=y
-CONFIG_NVMEM_ROCKCHIP_EFUSE=y
-# CONFIG_NVMEM_ROCKCHIP_OTP is not set
-CONFIG_NVMEM_SYSFS=y
-CONFIG_NVME_CORE=y
-# CONFIG_NVME_HWMON is not set
-# CONFIG_NVME_MULTIPATH is not set
-# CONFIG_NVME_TCP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IOMMU=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_OVERLAY=y
-CONFIG_OF_RESOLVE=y
-CONFIG_OLD_SIGSUSPEND3=y
-# CONFIG_OVERLAY_FS_XINO_AUTO is not set
-CONFIG_PADATA=y
-CONFIG_PAGE_POOL=y
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCIE_ROCKCHIP=y
-CONFIG_PCIE_ROCKCHIP_HOST=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_STUB=y
-CONFIG_PCS_XPCS=y
-CONFIG_PGTABLE_LEVELS=4
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_ROCKCHIP_DP=y
-# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
-CONFIG_PHY_ROCKCHIP_EMMC=y
-# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
-# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
-CONFIG_PHY_ROCKCHIP_INNO_USB2=y
-CONFIG_PHY_ROCKCHIP_PCIE=y
-CONFIG_PHY_ROCKCHIP_TYPEC=y
-CONFIG_PHY_ROCKCHIP_USB=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_RK805 is not set
-CONFIG_PINCTRL_ROCKCHIP=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PL330_DMA=y
-CONFIG_PLATFORM_MHU=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_DEVFREQ=y
-# CONFIG_PM_DEVFREQ_EVENT is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_SUPPLY_HWMON=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPTION=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PROC_VMCORE=y
-CONFIG_PWM=y
-CONFIG_PWM_ROCKCHIP=y
-CONFIG_PWM_SYSFS=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_QUOTA=y
-CONFIG_QUOTACTL=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_RAID_ATTRS=y
-CONFIG_RANDOMIZE_BASE=y
-CONFIG_RANDOMIZE_MODULE_REGION_FULL=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_RCU_TRACE=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FAN53555=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_PWM=y
-CONFIG_REGULATOR_RK808=y
-# CONFIG_REGULATOR_RT4801 is not set
-# CONFIG_REGULATOR_RTMV20 is not set
-CONFIG_RELOCATABLE=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_ROCKCHIP_GRF=y
-CONFIG_ROCKCHIP_IODOMAIN=y
-CONFIG_ROCKCHIP_IOMMU=y
-CONFIG_ROCKCHIP_MBOX=y
-CONFIG_ROCKCHIP_PHY=y
-CONFIG_ROCKCHIP_PM_DOMAINS=y
-# CONFIG_ROCKCHIP_SARADC is not set
-CONFIG_ROCKCHIP_THERMAL=y
-CONFIG_ROCKCHIP_TIMER=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPS=y
-CONFIG_RSEQ=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RK808=y
-# CONFIG_RTC_DRV_RV3032 is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_NVMEM=y
-# CONFIG_RUNTIME_TESTING_MENU is not set
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCHED_MC=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS=y
-# CONFIG_SECURITY_DMESG_RESTRICT is not set
-CONFIG_SENSORS_ARM_SCPI=y
-# CONFIG_SENSORS_MR75203 is not set
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_EXAR=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SG_POOL=y
-CONFIG_SIMPLE_PM_BUS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_SMP=y
-# CONFIG_SND_SOC_ROCKCHIP is not set
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_DYNAMIC=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_ROCKCHIP=y
-CONFIG_SPI_SPIDEV=y
-# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
-CONFIG_SQUASHFS_DECOMP_SINGLE=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FILE_CACHE=y
-# CONFIG_SQUASHFS_FILE_DIRECT is not set
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-CONFIG_STACKPROTECTOR=y
-CONFIG_STACKPROTECTOR_STRONG=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STMMAC_SELFTESTS is not set
-CONFIG_STRICT_DEVMEM=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_SWAP is not set
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-# CONFIG_TEXTSEARCH is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_EMULATION=y
-CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TRACE_CLOCK=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
-# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_TYPEC=y
-# CONFIG_TYPEC_DP_ALTMODE is not set
-CONFIG_TYPEC_FUSB302=y
-# CONFIG_TYPEC_HD3SS3220 is not set
-# CONFIG_TYPEC_MUX_PI3USB30532 is not set
-# CONFIG_TYPEC_STUSB160X is not set
-# CONFIG_TYPEC_TCPCI is not set
-CONFIG_TYPEC_TCPM=y
-# CONFIG_TYPEC_TPS6598X is not set
-# CONFIG_UACCE is not set
-# CONFIG_UCLAMP_TASK is not set
-# CONFIG_UEVENT_HELPER is not set
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_HOST=y
-CONFIG_USB_DWC3_OF_SIMPLE=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_HID=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_PHY=y
-CONFIG_USB_ROLE_SWITCH=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_ULPI_BUS=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PLATFORM=y
-# CONFIG_VIRTIO_MENU is not set
-CONFIG_VMAP_STACK=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_WATCHDOG is not set
-CONFIG_XARRAY_MULTI=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/rockchip/patches-5.10/004-v5.13-rockchip-rk3399-Add-support-for-FriendlyARM-NanoPi-R.patch b/target/linux/rockchip/patches-5.10/004-v5.13-rockchip-rk3399-Add-support-for-FriendlyARM-NanoPi-R.patch
deleted file mode 100644
index 461a5ae7dd4c..000000000000
--- a/target/linux/rockchip/patches-5.10/004-v5.13-rockchip-rk3399-Add-support-for-FriendlyARM-NanoPi-R.patch
+++ /dev/null
@@ -1,177 +0,0 @@
-From db792e9adbf85ffc9d6b0b060ac3c8e3148c8992 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Fri, 19 Mar 2021 13:16:27 +0800
-Subject: [PATCH] rockchip: rk3399: Add support for FriendlyARM NanoPi R4S
-
-This adds support for the NanoPi R4S from FriendlyArm.
-
-Rockchip RK3399 SoC
-1GB DDR3 or 4GB LPDDR4 RAM
-Gigabit Ethernet (WAN)
-Gigabit Ethernet (PCIe) (LAN)
-USB 3.0 Port x 2
-MicroSD slot
-Reset button
-WAN - LAN - SYS LED
-
-Co-developed-by: Jensen Huang <jensenhuang@friendlyarm.com>
-Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com>
-[minor adjustments]
-Co-developed-by: Marty Jones <mj8263788@gmail.com>
-Signed-off-by: Marty Jones <mj8263788@gmail.com>
-[further adjustments, fixed format issues]
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
-Link: https://lore.kernel.org/r/20210319051627.814-2-cnsztl@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile         |   1 +
- .../boot/dts/rockchip/rk3399-nanopi-r4s.dts   | 133 +++++++++++++++++++++
- 2 files changed, 134 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -30,6 +30,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-le
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-@@ -0,0 +1,133 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * FriendlyElec NanoPC-T4 board device tree source
-+ *
-+ * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
-+ * (http://www.friendlyarm.com)
-+ *
-+ * Copyright (c) 2018 Collabora Ltd.
-+ *
-+ * Copyright (c) 2020 Jensen Huang <jensenhuang@friendlyarm.com>
-+ * Copyright (c) 2020 Marty Jones <mj8263788@gmail.com>
-+ * Copyright (c) 2021 Tianling Shen <cnsztl@gmail.com>
-+ */
-+
-+/dts-v1/;
-+#include "rk3399-nanopi4.dtsi"
-+
-+/ {
-+	model = "FriendlyElec NanoPi R4S";
-+	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
-+
-+	/delete-node/ display-subsystem;
-+
-+	gpio-leds {
-+		pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
-+
-+		/delete-node/ led-0;
-+
-+		lan_led: led-lan {
-+			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
-+			label = "green:lan";
-+		};
-+
-+		sys_led: led-sys {
-+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-+			label = "red:sys";
-+			default-state = "on";
-+		};
-+
-+		wan_led: led-wan {
-+			gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-+			label = "green:wan";
-+		};
-+	};
-+
-+	gpio-keys {
-+		pinctrl-0 = <&reset_button_pin>;
-+
-+		/delete-node/ power;
-+
-+		reset {
-+			debounce-interval = <50>;
-+			gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
-+			label = "reset";
-+			linux,code = <KEY_RESTART>;
-+		};
-+	};
-+
-+	vdd_5v: vdd-5v {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vdd_5v";
-+		regulator-always-on;
-+		regulator-boot-on;
-+	};
-+};
-+
-+&emmc_phy {
-+	status = "disabled";
-+};
-+
-+&i2c4 {
-+	status = "disabled";
-+};
-+
-+&pcie0 {
-+	max-link-speed = <1>;
-+	num-lanes = <1>;
-+	vpcie3v3-supply = <&vcc3v3_sys>;
-+};
-+
-+&pinctrl {
-+	gpio-leds {
-+		/delete-node/ status-led-pin;
-+
-+		lan_led_pin: lan-led-pin {
-+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		sys_led_pin: sys-led-pin {
-+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		wan_led_pin: wan-led-pin {
-+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	rockchip-key {
-+		/delete-node/ power-key;
-+
-+		reset_button_pin: reset-button-pin {
-+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
-+		};
-+	};
-+};
-+
-+&sdhci {
-+	status = "disabled";
-+};
-+
-+&sdio0 {
-+	status = "disabled";
-+};
-+
-+&u2phy0_host {
-+	phy-supply = <&vdd_5v>;
-+};
-+
-+&u2phy1_host {
-+	status = "disabled";
-+};
-+
-+&uart0 {
-+	status = "disabled";
-+};
-+
-+&usbdrd_dwc3_0 {
-+	dr_mode = "host";
-+};
-+
-+&vcc3v3_sys {
-+	vin-supply = <&vcc5v0_sys>;
-+};
diff --git a/target/linux/rockchip/patches-5.10/005-arm64-dts-rockchip-add-EEPROM-node-for-NanoPi-R4S.patch b/target/linux/rockchip/patches-5.10/005-arm64-dts-rockchip-add-EEPROM-node-for-NanoPi-R4S.patch
deleted file mode 100644
index 792028b29290..000000000000
--- a/target/linux/rockchip/patches-5.10/005-arm64-dts-rockchip-add-EEPROM-node-for-NanoPi-R4S.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From af20b3384e8723077cc6484160b0cf4e9be321de Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Mon, 7 Jun 2021 15:45:37 +0800
-Subject: [PATCH] arm64: dts: rockchip: add EEPROM node for NanoPi R4S
-
-NanoPi R4S has a EEPROM attached to the 2nd I2C bus (U92), which
-stores the MAC address.
-
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
----
- arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-@@ -68,6 +68,15 @@
- 	status = "disabled";
- };
- 
-+&i2c2 {
-+	eeprom@51 {
-+		compatible = "microchip,24c02", "atmel,24c02";
-+		reg = <0x51>;
-+		pagesize = <16>;
-+		read-only; /* This holds our MAC */
-+	};
-+};
-+
- &i2c4 {
- 	status = "disabled";
- };
diff --git a/target/linux/rockchip/patches-5.10/100-rockchip-use-system-LED-for-OpenWrt.patch b/target/linux/rockchip/patches-5.10/100-rockchip-use-system-LED-for-OpenWrt.patch
deleted file mode 100644
index 7b3b50ffd85e..000000000000
--- a/target/linux/rockchip/patches-5.10/100-rockchip-use-system-LED-for-OpenWrt.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 6731d2c9039fbe1ecf21915eab3acee0a999508a Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Fri, 10 Jul 2020 21:38:20 +0200
-Subject: [PATCH] rockchip: use system LED for OpenWrt
-
-Use the SYS LED on the casing for showing system status.
-
-This patch is kept separate from the NanoPi R2S support patch, as i plan
-on submitting the device support upstream.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -13,6 +13,13 @@
- 	model = "FriendlyElec NanoPi R2S";
- 	compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
- 
-+	aliases {
-+		led-boot = &sys_led;
-+		led-failsafe = &sys_led;
-+		led-running = &sys_led;
-+		led-upgrade = &sys_led;
-+	};
-+
- 	chosen {
- 		stdout-path = "serial2:1500000n8";
- 	};
diff --git a/target/linux/rockchip/patches-5.10/101-dts-rockchip-add-usb3-controller-node-for-RK3328-SoCs.patch b/target/linux/rockchip/patches-5.10/101-dts-rockchip-add-usb3-controller-node-for-RK3328-SoCs.patch
deleted file mode 100644
index 2dd6e40ebf92..000000000000
--- a/target/linux/rockchip/patches-5.10/101-dts-rockchip-add-usb3-controller-node-for-RK3328-SoCs.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From: William Wu <william.wu@rock-chips.com>
-
-RK3328 has one USB 3.0 OTG controller which uses DWC_USB3
-core's general architecture. It can act as static xHCI host
-controller, static device controller, USB 3.0/2.0 OTG basing
-on ID of USB3.0 PHY.
-
-Signed-off-by: William Wu <william.wu@rock-chips.com>
-Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com>
-
----
-
-NOTE: This binding still has issues. From the original thread:
-
-the rk3328 usb3-phy has an issue with detecting any plugin events
-after a previous device got removed - see the inno-usb3-phy driver
-in the vendor kernel.
-
-The current state is good-enough for enabling the USB3 attached LAN
-port of the NanoPi R2S. However, it might explode depending on your
-use-case. You've been warned.
-
----
- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 27 ++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
-@@ -985,22 +985,30 @@
- 	};
- 
- 	usbdrd3: usb@ff600000 {
--		compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
--		reg = <0x0 0xff600000 0x0 0x100000>;
--		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-+		compatible = "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3";
- 		clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
- 			 <&cru ACLK_USB3OTG>;
- 		clock-names = "ref_clk", "suspend_clk",
- 			      "bus_clk";
--		dr_mode = "otg";
--		phy_type = "utmi_wide";
--		snps,dis-del-phy-power-chg-quirk;
--		snps,dis_enblslpm_quirk;
--		snps,dis-tx-ipgap-linecheck-quirk;
--		snps,dis-u2-freeclk-exists-quirk;
--		snps,dis_u2_susphy_quirk;
--		snps,dis_u3_susphy_quirk;
-+		#address-cells = <2>;
-+		#size-cells = <2>;
-+		ranges;
- 		status = "disabled";
-+
-+		usbdrd_dwc3: dwc3@ff600000 {
-+			compatible = "snps,dwc3";
-+			reg = <0x0 0xff600000 0x0 0x100000>;
-+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-+			dr_mode = "otg";
-+			phy_type = "utmi_wide";
-+			snps,dis_enblslpm_quirk;
-+			snps,dis-u2-freeclk-exists-quirk;
-+			snps,dis_u2_susphy_quirk;
-+			snps,dis_u3_susphy_quirk;
-+			snps,dis-del-phy-power-chg-quirk;
-+			snps,dis-tx-ipgap-linecheck-quirk;
-+			status = "disabled";
-+		};
- 	};
- 
- 	gic: interrupt-controller@ff811000 {
diff --git a/target/linux/rockchip/patches-5.10/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch b/target/linux/rockchip/patches-5.10/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch
deleted file mode 100644
index 48e8d472c85a..000000000000
--- a/target/linux/rockchip/patches-5.10/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 0fc3b9b7619c4878f73a6a7989863f0d1a3fd392 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Fri, 10 Jul 2020 21:12:16 +0200
-Subject: [PATCH] rockchip: enabled LAN port on NanoPi R2S
-
-Enable the USB3 port on the FriendlyARM NanoPi R2S.
-This is required for the USB3 attached LAN port to work.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- .../boot/dts/rockchip/rk3328-nanopi-r2s.dts   | 27 +++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -44,6 +44,18 @@
- 		};
- 	};
- 
-+	vcc_rtl8153: vcc-rtl8153-regulator {
-+		compatible = "regulator-fixed";
-+		gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&rtl8153_en_drv>;
-+		regulator-always-on;
-+		regulator-name = "vcc_rtl8153";
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		enable-active-high;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 		pinctrl-0 = <&lan_led_pin>,  <&sys_led_pin>, <&wan_led_pin>;
-@@ -271,6 +283,12 @@
- 			};
- 		};
- 	};
-+
-+	usb {
-+		rtl8153_en_drv: rtl8153-en-drv {
-+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
- };
- 
- &io_domains {
-@@ -377,3 +395,12 @@
- &usb_host0_ohci {
- 	status = "okay";
- };
-+
-+&usbdrd3 {
-+	status = "okay";
-+};
-+
-+&usbdrd_dwc3 {
-+	dr_mode = "host";
-+	status = "okay";
-+};
diff --git a/target/linux/rockchip/patches-5.10/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch b/target/linux/rockchip/patches-5.10/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch
deleted file mode 100644
index dfc71a2701e4..000000000000
--- a/target/linux/rockchip/patches-5.10/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 2795c8b31a686bdb8338f9404d18ef7a154f0d75 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 13:32:59 +0200
-Subject: [PATCH] arm64: rockchip: add OF node for USB eth on NanoPi R2S
-
-This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
-NanoPi R2S. Add the correct value for the RTL8153 LED configuration
-register to match the blink behavior of the other port on the device.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -403,4 +403,11 @@
- &usbdrd_dwc3 {
- 	dr_mode = "host";
- 	status = "okay";
-+
-+	usb-eth@2 {
-+		compatible = "realtek,rtl8153";
-+		reg = <2>;
-+
-+		realtek,led-data = <0x87>;
-+	};
- };
diff --git a/target/linux/rockchip/patches-5.10/104-rockchip-use-USB-host-by-default-on-rk3399-rock-pi-4.patch b/target/linux/rockchip/patches-5.10/104-rockchip-use-USB-host-by-default-on-rk3399-rock-pi-4.patch
deleted file mode 100644
index 56166783a581..000000000000
--- a/target/linux/rockchip/patches-5.10/104-rockchip-use-USB-host-by-default-on-rk3399-rock-pi-4.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From e12f67fe83446432ef16704c22ec23bd1dbcd094 Mon Sep 17 00:00:00 2001
-From: Vicente Bergas <vicencb@gmail.com>
-Date: Tue, 1 Dec 2020 16:41:32 +0100
-Subject: arm64: dts: rockchip: use USB host by default on rk3399-rock-pi-4
-
-Based on the board schematics at
-https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi_4c_v12_sch_20200620.pdf
-on page 19 there is an USB Type-A receptacle being used as an USB-OTG port.
-
-But the Type-A connector is not valid for OTG operation, for this reason
-there is a switch to select host or device role.
-This is non-compliant and error prone because switching is manual.
-So, use host mode as it corresponds for a Type-A receptacle.
-
-Signed-off-by: Vicente Bergas <vicencb@gmail.com>
-Link: https://lore.kernel.org/r/20201201154132.1286-4-vicencb@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
-@@ -679,7 +679,7 @@
- 
- &usbdrd_dwc3_0 {
- 	status = "okay";
--	dr_mode = "otg";
-+	dr_mode = "host";
- };
- 
- &usbdrd3_1 {
diff --git a/target/linux/rockchip/patches-5.10/105-nanopi-r4s-sd-signalling.patch b/target/linux/rockchip/patches-5.10/105-nanopi-r4s-sd-signalling.patch
deleted file mode 100644
index a04c14b70a72..000000000000
--- a/target/linux/rockchip/patches-5.10/105-nanopi-r4s-sd-signalling.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: David Bauer <mail@david-bauer.net>
-Subject: arm64: dts: rockchip: disable UHS modes for NanoPi R4S
-
-The NanoPi R4S leaves the SD card in 1.8V signalling when rebooting
-while U-Boot requires the card to be in 3.3V mode.
-
-Remove UHS support from the SD controller so the card remains in 3.3V
-mode. This reduces transfer speeds but ensures a reboot whether from
-userspace or following a kernel panic is always working.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-
---- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-@@ -121,6 +121,11 @@
- 	status = "disabled";
- };
- 
-+&sdmmc {
-+	/delete-property/ sd-uhs-sdr104;
-+	cap-sd-highspeed;
-+};
-+
- &u2phy0_host {
- 	phy-supply = <&vdd_5v>;
- };
diff --git a/target/linux/rockchip/patches-5.10/106-r4s-openwrt-leds.patch b/target/linux/rockchip/patches-5.10/106-r4s-openwrt-leds.patch
deleted file mode 100644
index d7579d61e90c..000000000000
--- a/target/linux/rockchip/patches-5.10/106-r4s-openwrt-leds.patch
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-@@ -19,6 +19,13 @@
- 	model = "FriendlyElec NanoPi R4S";
- 	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
- 
-+	aliases {
-+		led-boot = &sys_led;
-+		led-failsafe = &sys_led;
-+		led-running = &sys_led;
-+		led-upgrade = &sys_led;
-+	};
-+
- 	/delete-node/ display-subsystem;
- 
- 	gpio-leds {
diff --git a/target/linux/sunxi/cortexa53/config-5.10 b/target/linux/sunxi/cortexa53/config-5.10
deleted file mode 100644
index 952b09b6eaa7..000000000000
--- a/target/linux/sunxi/cortexa53/config-5.10
+++ /dev/null
@@ -1,96 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-# CONFIG_ARM64_PTR_AUTH is not set
-# CONFIG_ARM64_SVE is not set
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
-CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DWMAC_SUN8I=y
-CONFIG_EEPROM_AT24=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MICREL_PHY=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_IOPORT_MAP=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PHY_SUN50I_USB3=y
-CONFIG_PINCTRL_SUN50I_A100=y
-CONFIG_PINCTRL_SUN50I_A100_R=y
-CONFIG_PINCTRL_SUN50I_A64=y
-CONFIG_PINCTRL_SUN50I_A64_R=y
-CONFIG_PINCTRL_SUN50I_H5=y
-CONFIG_PINCTRL_SUN50I_H6=y
-CONFIG_PINCTRL_SUN50I_H6_R=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RTC_DRV_SUN6I=y
-# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SUN50I_A100_CCU=y
-CONFIG_SUN50I_A100_R_CCU=y
-CONFIG_SUN50I_A64_CCU=y
-CONFIG_SUN50I_DE2_BUS=y
-CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
-CONFIG_SUN50I_H6_CCU=y
-CONFIG_SUN50I_H6_R_CCU=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB_MUSB_DUAL_ROLE=y
-# CONFIG_USB_MUSB_GADGET is not set
-CONFIG_USB_MUSB_HDRC=y
-# CONFIG_USB_MUSB_HOST is not set
-CONFIG_USB_MUSB_SUNXI=y
-CONFIG_USB_PHY=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/sunxi/cortexa7/config-5.10 b/target/linux/sunxi/cortexa7/config-5.10
deleted file mode 100644
index 90e977b5660c..000000000000
--- a/target/linux/sunxi/cortexa7/config-5.10
+++ /dev/null
@@ -1,26 +0,0 @@
-CONFIG_B53=y
-CONFIG_B53_MDIO_DRIVER=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_DWMAC_SUN8I=y
-CONFIG_GRO_CELLS=y
-# CONFIG_MACH_SUN4I is not set
-# CONFIG_MACH_SUN5I is not set
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MICREL_PHY=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_TAG_BRCM=y
-CONFIG_NET_DSA_TAG_BRCM_COMMON=y
-CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
-CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_RTC_DRV_SUN6I=y
-CONFIG_USB_MUSB_DUAL_ROLE=y
-# CONFIG_USB_MUSB_GADGET is not set
-CONFIG_USB_MUSB_HDRC=y
-# CONFIG_USB_MUSB_HOST is not set
-CONFIG_USB_MUSB_SUNXI=y
-CONFIG_USB_PHY=y
diff --git a/target/linux/sunxi/cortexa8/config-5.10 b/target/linux/sunxi/cortexa8/config-5.10
deleted file mode 100644
index 5dab93095dde..000000000000
--- a/target/linux/sunxi/cortexa8/config-5.10
+++ /dev/null
@@ -1,12 +0,0 @@
-# CONFIG_ARM_LPAE is not set
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-# CONFIG_MACH_SUN6I is not set
-# CONFIG_MACH_SUN7I is not set
-# CONFIG_MACH_SUN8I is not set
-# CONFIG_MACH_SUN9I is not set
-CONFIG_PGTABLE_LEVELS=2
-# CONFIG_PHY_SUN9I_USB is not set
-# CONFIG_SPI_SUN6I is not set
-# CONFIG_SUN8I_A83T_CCU is not set
-# CONFIG_SUN8I_THERMAL is not set
diff --git a/target/linux/tegra/config-5.10 b/target/linux/tegra/config-5.10
deleted file mode 100644
index 9c80b5595b70..000000000000
--- a/target/linux/tegra/config-5.10
+++ /dev/null
@@ -1,483 +0,0 @@
-CONFIG_AC97_BUS=y
-# CONFIG_AHCI_TEGRA is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
-CONFIG_ARCH_NR_GPIO=1024
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_TEGRA=y
-# CONFIG_ARCH_TEGRA_114_SOC is not set
-# CONFIG_ARCH_TEGRA_124_SOC is not set
-CONFIG_ARCH_TEGRA_2x_SOC=y
-# CONFIG_ARCH_TEGRA_3x_SOC is not set
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754327=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_PL172_MPMC is not set
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_TEGRA_CPUIDLE=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASN1=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONTIG_ALLOC=y
-# CONFIG_CPUFREQ_DT is not set
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AKCIPHER=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZ4=y
-CONFIG_CRYPTO_LZ4HC=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_RSA=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA256_ARM=y
-CONFIG_CRYPTO_SHA512_ARM=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEVPORT is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DNOTIFY=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_MIPI_DSI=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_TEGRA=y
-# CONFIG_DRM_TEGRA_DEBUG is not set
-# CONFIG_DRM_TEGRA_STAGING is not set
-CONFIG_DTC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_FW_CACHE is not set
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GLOB=y
-CONFIG_GPIO_TEGRA=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HDMI=y
-CONFIG_HID=y
-CONFIG_HIDRAW=y
-CONFIG_HID_GENERIC=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_TEGRA=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_IOMMU_API=y
-# CONFIG_IOMMU_DEBUGFS is not set
-CONFIG_IOMMU_IOVA=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KCMP=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZ4HC_COMPRESS=y
-CONFIG_LZ4_COMPRESS=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-# CONFIG_MFD_NVEC is not set
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_TEGRA=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MPILIB=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NEON is not set
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IOMMU=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_ARCH_FALLBACKS=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_TEGRA=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHY_TEGRA_XUSB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_TEGRA=y
-CONFIG_PINCTRL_TEGRA20=y
-CONFIG_PINCTRL_TEGRA_XUSB=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PL353_SMC=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-CONFIG_PWM_TEGRA=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TEGRA=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RTC_NVMEM=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_TEGRA=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_TEGRA=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SND=y
-# CONFIG_SND_COMPRESS_OFFLOAD is not set
-CONFIG_SND_DMAENGINE_PCM=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_HDA_TEGRA is not set
-CONFIG_SND_JACK=y
-CONFIG_SND_JACK_INPUT_DEV=y
-# CONFIG_SND_PCI is not set
-CONFIG_SND_PCM=y
-# CONFIG_SND_PROC_FS is not set
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_SIMPLE_CARD_UTILS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
-CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-CONFIG_SND_SOC_TEGRA=y
-# CONFIG_SND_SOC_TEGRA186_DSPK is not set
-CONFIG_SND_SOC_TEGRA20_AC97=y
-CONFIG_SND_SOC_TEGRA20_DAS=y
-CONFIG_SND_SOC_TEGRA20_I2S=y
-CONFIG_SND_SOC_TEGRA20_SPDIF=y
-# CONFIG_SND_SOC_TEGRA210_ADMAIF is not set
-# CONFIG_SND_SOC_TEGRA210_AHUB is not set
-# CONFIG_SND_SOC_TEGRA210_DMIC is not set
-# CONFIG_SND_SOC_TEGRA210_I2S is not set
-# CONFIG_SND_SOC_TEGRA30_AHUB is not set
-# CONFIG_SND_SOC_TEGRA30_I2S is not set
-# CONFIG_SND_SOC_TEGRA_ALC5632 is not set
-# CONFIG_SND_SOC_TEGRA_MAX98090 is not set
-# CONFIG_SND_SOC_TEGRA_RT5640 is not set
-# CONFIG_SND_SOC_TEGRA_RT5677 is not set
-# CONFIG_SND_SOC_TEGRA_SGTL5000 is not set
-CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
-# CONFIG_SND_SOC_TEGRA_WM8753 is not set
-# CONFIG_SND_SOC_TEGRA_WM8903 is not set
-# CONFIG_SND_SOC_TEGRA_WM9712 is not set
-CONFIG_SND_SOC_TLV320AIC23=y
-CONFIG_SND_SOC_TLV320AIC23_I2C=y
-# CONFIG_SND_USB is not set
-CONFIG_SOC_BUS=y
-CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER=y
-CONFIG_SOC_TEGRA_FLOWCTRL=y
-CONFIG_SOC_TEGRA_FUSE=y
-CONFIG_SOC_TEGRA_PMC=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_TEGRA114 is not set
-CONFIG_SPI_TEGRA20_SFLASH=y
-CONFIG_SPI_TEGRA20_SLINK=y
-CONFIG_SRCU=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TEGRA20_APB_DMA=y
-CONFIG_TEGRA20_EMC=y
-CONFIG_TEGRA_AHB=y
-CONFIG_TEGRA_GMI=y
-CONFIG_TEGRA_HOST1X=y
-CONFIG_TEGRA_HOST1X_FIREWALL=y
-CONFIG_TEGRA_IOMMU_GART=y
-# CONFIG_TEGRA_IOMMU_SMMU is not set
-# CONFIG_TEGRA_IVC is not set
-CONFIG_TEGRA_MC=y
-# CONFIG_TEGRA_SOCTHERM is not set
-CONFIG_TEGRA_TIMER=y
-CONFIG_TEGRA_WATCHDOG=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-# CONFIG_UACCE is not set
-# CONFIG_UCLAMP_TASK is not set
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_CONN_GPIO=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_TEGRA=y
-CONFIG_USB_HID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_PHY=y
-CONFIG_USB_ROLE_SWITCH=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_TEGRA_PHY=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_USB_XHCI_TEGRA is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/tegra/patches-5.10/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch b/target/linux/tegra/patches-5.10/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch
deleted file mode 100644
index 8f01f73eb24a..000000000000
--- a/target/linux/tegra/patches-5.10/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From patchwork Fri Jul 13 11:32:42 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: serial8250 on tegra hsuart: recover from spurious interrupts due to
- tegra2 silicon bug
-X-Patchwork-Submitter: "David R. Piegdon" <lkml@p23q.org>
-X-Patchwork-Id: 943440
-Message-Id: <4676ea34-69ce-5422-1ded-94218b89f7d9@p23q.org>
-To: linux-tegra@vger.kernel.org
-Date: Fri, 13 Jul 2018 11:32:42 +0000
-From: "David R. Piegdon" <lkml@p23q.org>
-List-Id: <linux-tegra.vger.kernel.org>
-
-Hi,
-a while back I sent a few mails regarding spurious interrupts in the
-UARTA (hsuart) block of the Tegra2 SoC, when using the 8250 driver for
-it instead of the hsuart driver. After going down a pretty deep
-debugging/testing hole, I think I found a patch that fixes the issue. So
-far testing in a reboot-cycle suggests that the error frequency dropped
-from >3% of all reboots to at least <0.05% of all reboots. Tests
-continue to run over the weekend.
-
-The patch below already is a second iteration; the first did not reset
-the MCR or contain the lines below '// clear interrupts'. This resulted
-in no more spurious interrupts, but in a few % of spurious interrupts
-that were recovered the UART block did not receive any characters any
-more. So further resetting was required to fully reacquire operational
-state of the UART block.
-
-I'd love any comments/suggestions on this!
-
-Cheers,
-
-David
-
---- a/drivers/tty/serial/8250/8250_core.c
-+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -134,6 +134,38 @@ static irqreturn_t serial8250_interrupt(
- 
- 		if (l == i->head && pass_counter++ > PASS_LIMIT)
- 			break;
-+
-+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-+		if (!handled && (port->type == PORT_TEGRA)) {
-+			/*
-+			 * Fix Tegra 2 CPU silicon bug where sometimes
-+			 * "TX holding register empty" interrupts result in a
-+			 * bad (metastable?) state in Tegras HSUART IP core.
-+			 * Only way to recover seems to be to reset all
-+			 * interrupts as well as the TX queue and the MCR.
-+			 * But we don't want to loose any outgoing characters,
-+			 * so only do it if the RX and TX queues are empty.
-+			 */
-+			unsigned char lsr = port->serial_in(port, UART_LSR);
-+			const unsigned char fifo_empty_mask =
-+						(UART_LSR_TEMT | UART_LSR_THRE);
-+			if (((lsr & (UART_LSR_DR | fifo_empty_mask)) ==
-+							fifo_empty_mask)) {
-+				port->serial_out(port, UART_IER, 0);
-+				port->serial_out(port, UART_MCR, 0);
-+				serial8250_clear_and_reinit_fifos(up);
-+				port->serial_out(port, UART_MCR, up->mcr);
-+				port->serial_out(port, UART_IER, up->ier);
-+				// clear interrupts
-+				serial_port_in(port, UART_LSR);
-+				serial_port_in(port, UART_RX);
-+				serial_port_in(port, UART_IIR);
-+				serial_port_in(port, UART_MSR);
-+				up->lsr_saved_flags = 0;
-+				up->msr_saved_flags = 0;
-+			}
-+		}
-+#endif
- 	} while (l != end);
- 
- 	spin_unlock(&i->lock);
diff --git a/target/linux/tegra/patches-5.10/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch b/target/linux/tegra/patches-5.10/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch
deleted file mode 100644
index b1e210b212de..000000000000
--- a/target/linux/tegra/patches-5.10/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/arm/boot/dts/tegra20-trimslice.dts
-+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
-@@ -201,16 +201,17 @@
- 			conf_ata {
- 				nvidia,pins = "ata", "atc", "atd", "ate",
- 					"crtp", "dap2", "dap3", "dap4", "dta",
--					"dtb", "dtc", "dtd", "dte", "gmb",
--					"gme", "i2cp", "pta", "slxc", "slxd",
--					"spdi", "spdo", "uda";
-+					"dtb", "dtc", "dtd", "gmb", "gme",
-+					"i2cp", "pta", "slxc", "slxd", "spdi",
-+					"spdo", "uda";
- 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
- 			};
- 			conf_atb {
- 				nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
--					"gma", "gmc", "gmd", "gpu", "gpu7",
--					"gpv", "sdio1", "slxa", "slxk", "uac";
-+					"dte", "gma", "gmc", "gmd", "gpu",
-+					"gpu7", "gpv", "sdio1", "slxa", "slxk",
-+					"uac";
- 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
- 			};
-@@ -396,6 +397,20 @@
- 		};
- 	};
- 
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+
-+		ds2 {
-+			label = "trimslice:green:right";
-+			gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_LOW>;
-+		};
-+
-+		ds3 {
-+			label = "trimslice:green:left";
-+			gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
- 	poweroff {
- 		compatible = "gpio-poweroff";
- 		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
diff --git a/target/linux/uml/config-5.10 b/target/linux/uml/config-5.10
deleted file mode 100644
index 1c432abe6827..000000000000
--- a/target/linux/uml/config-5.10
+++ /dev/null
@@ -1,135 +0,0 @@
-CONFIG_3_LEVEL_PGTABLES=y
-CONFIG_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_NO_PREEMPT=y
-CONFIG_BLK_DEV_COW_COMMON=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_UBD=y
-CONFIG_BLK_DEV_UBD_SYNC=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_CDROM=y
-# CONFIG_COMMON_CLK is not set
-# CONFIG_COMPAT_32BIT_TIME is not set
-CONFIG_CON_CHAN="xterm"
-CONFIG_CON_ZERO_CHAN="fd:0,fd:1"
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_CPU_SUP_HYGON=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_ZHAOXIN=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DNOTIFY=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-CONFIG_FAILOVER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_GENERIC_CPU is not set
-CONFIG_GENERIC_CPU_DEVICES=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_HOSTFS=y
-CONFIG_HVC_DRIVER=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_IA32_FEAT_CTL=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INIT_ENV_ARG_LIMIT=128
-CONFIG_IRQ_WORK=y
-CONFIG_ISO9660_FS=y
-CONFIG_JBD2=y
-# CONFIG_JFFS2_FS is not set
-CONFIG_KALLSYMS=y
-CONFIG_KERNEL_STACK_ORDER=2
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-# CONFIG_MATOM is not set
-CONFIG_MAY_HAVE_RUNTIME_DEPS=y
-CONFIG_MCONSOLE=y
-# CONFIG_MCORE2 is not set
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MK8=y
-# CONFIG_MMAPPER is not set
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPSC is not set
-CONFIG_NAMESPACES=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_FAILOVER=y
-# CONFIG_NET_NS is not set
-CONFIG_NLS=y
-CONFIG_NO_DMA=y
-CONFIG_NO_IOMEM=y
-CONFIG_NR_CPUS=1
-CONFIG_NULL_CHAN=y
-# CONFIG_OF is not set
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PORT_CHAN=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_PROCESSOR_SELECT is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PTY_CHAN=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RELAY=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SRCU=y
-CONFIG_SSL=y
-CONFIG_SSL_CHAN="pty"
-CONFIG_STACKTRACE=y
-CONFIG_STDERR_CONSOLE=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_TTY_CHAN=y
-CONFIG_UML=y
-CONFIG_UML_NET=y
-CONFIG_UML_NET_DAEMON=y
-CONFIG_UML_NET_DETERMINISTIC_MAC=y
-CONFIG_UML_NET_ETHERTAP=y
-CONFIG_UML_NET_MCAST=y
-# CONFIG_UML_NET_PCAP is not set
-CONFIG_UML_NET_SLIP=y
-CONFIG_UML_NET_SLIRP=y
-CONFIG_UML_NET_TUNTAP=y
-# CONFIG_UML_NET_VDE is not set
-CONFIG_UML_NET_VECTOR=y
-CONFIG_UML_RANDOM=y
-# CONFIG_UML_SOUND is not set
-CONFIG_UML_TIME_TRAVEL_SUPPORT=y
-CONFIG_UML_WATCHDOG=y
-CONFIG_UML_X86=y
-# CONFIG_USER_NS is not set
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_UML=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_X86_64=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-CONFIG_X86_TSC=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_XTERM_CHAN=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/uml/patches-5.10/001-um-Fix-build-w-o-CONFIG_PM_SLEEP.patch b/target/linux/uml/patches-5.10/001-um-Fix-build-w-o-CONFIG_PM_SLEEP.patch
deleted file mode 100644
index acee358dd7ce..000000000000
--- a/target/linux/uml/patches-5.10/001-um-Fix-build-w-o-CONFIG_PM_SLEEP.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 1fb1abc83636f5329c26cd29f0f19f3faeb697a5 Mon Sep 17 00:00:00 2001
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Mon, 14 Dec 2020 20:51:02 +0100
-Subject: [PATCH] um: Fix build w/o CONFIG_PM_SLEEP
-
-uml_pm_wake() is unconditionally called from the SIGUSR1 wakeup
-handler since that's in the userspace portion of UML, and thus
-a bit tricky to ifdef out. Since pm_system_wakeup() can always
-be called (but may be an empty inline), also simply always have
-uml_pm_wake() to fix the build.
-
-Reported-by: Randy Dunlap <rdunlap@infradead.org>
-Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-Signed-off-by: Richard Weinberger <richard@nod.at>
----
---- a/arch/um/kernel/um_arch.c
-+++ b/arch/um/kernel/um_arch.c
-@@ -387,12 +387,12 @@ void text_poke_sync(void)
- {
- }
- 
--#ifdef CONFIG_PM_SLEEP
- void uml_pm_wake(void)
- {
- 	pm_system_wakeup();
- }
- 
-+#ifdef CONFIG_PM_SLEEP
- static int init_pm_wake_signal(void)
- {
- 	/*
diff --git a/target/linux/uml/patches-5.10/101-mconsole-exec.patch b/target/linux/uml/patches-5.10/101-mconsole-exec.patch
deleted file mode 100644
index dae84d6bf54b..000000000000
--- a/target/linux/uml/patches-5.10/101-mconsole-exec.patch
+++ /dev/null
@@ -1,213 +0,0 @@
-#
-# Minimalist mconsole exec patch 
-#
-# 3.10 version (with bit more synchronous behavior) by fingon at iki dot fi
-# Adaptation to kernel 3.3.8 made by David Fernández (david at dit.upm.es) for 
-# Starting point: mconsole-exec-2.6.30.patch for kernel 2.6.30
-# Author of original patch: Paolo Giarrusso, aka Blaisorblade 
-#                           (http://www.user-mode-linux.org/~blaisorblade)
-#
-# Known misfeatures:
-#
-# - If output is too long, blocks (and breaks horribly) 
-# (this misfeature from 3.10 patches, when minimalizing the patch;
-#  workaround: redirect to a shared filesystem if long output is expected)
-#
-# - Nothing useful is done with stdin
-#
---- a/arch/um/drivers/mconsole.h
-+++ b/arch/um/drivers/mconsole.h
-@@ -85,6 +85,7 @@ extern void mconsole_cad(struct mc_reque
- extern void mconsole_stop(struct mc_request *req);
- extern void mconsole_go(struct mc_request *req);
- extern void mconsole_log(struct mc_request *req);
-+extern void mconsole_exec(struct mc_request *req);
- extern void mconsole_proc(struct mc_request *req);
- extern void mconsole_stack(struct mc_request *req);
- 
---- a/arch/um/drivers/mconsole_kern.c
-+++ b/arch/um/drivers/mconsole_kern.c
-@@ -4,6 +4,7 @@
-  * Copyright (C) 2001 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
-  */
- 
-+#include <linux/kmod.h>
- #include <linux/console.h>
- #include <linux/ctype.h>
- #include <linux/string.h>
-@@ -26,6 +27,7 @@
- #include <linux/mount.h>
- #include <linux/file.h>
- #include <linux/uaccess.h>
-+#include <linux/completion.h>
- #include <asm/switch_to.h>
- 
- #include <init.h>
-@@ -123,6 +125,59 @@ void mconsole_log(struct mc_request *req
- 	mconsole_reply(req, "", 0, 0);
- }
- 
-+void mconsole_exec(struct mc_request *req)
-+{
-+  struct subprocess_info *sub_info;
-+  int res, len;
-+  struct file *out;
-+  char buf[MCONSOLE_MAX_DATA];
-+
-+  char *envp[] = {
-+    "HOME=/", "TERM=linux",
-+    "PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin",
-+    NULL
-+  };
-+  char *argv[] = {
-+    "/bin/sh", "-c",
-+    req->request.data + strlen("exec "),
-+    NULL
-+  };
-+
-+  sub_info = call_usermodehelper_setup("/bin/sh", argv, envp, GFP_ATOMIC, NULL, NULL, NULL);
-+  if (sub_info == NULL) {
-+    mconsole_reply(req, "call_usermodehelper_setup failed", 1, 0);
-+    return;
-+  }
-+  res = call_usermodehelper_stdoutpipe(sub_info, &out);
-+  if (res < 0) {
-+    kfree(sub_info);
-+    mconsole_reply(req, "call_usermodehelper_stdoutpipe failed", 1, 0);
-+    return;
-+  }
-+
-+  res = call_usermodehelper_exec(sub_info, UMH_WAIT_PROC);
-+  if (res < 0) {
-+    kfree(sub_info);
-+    mconsole_reply(req, "call_usermodehelper_exec failed", 1, 0);
-+    return;
-+  }
-+
-+  for (;;) {
-+    len = out->f_op->read(out, buf, sizeof(buf), &out->f_pos);
-+    if (len < 0) {
-+      mconsole_reply(req, "reading output failed", 1, 0);
-+      break;
-+    }
-+    if (len == 0)
-+      break;
-+    mconsole_reply_len(req, buf, len, 0, 1);
-+  }
-+  fput(out);
-+
-+  mconsole_reply_len(req, NULL, 0, 0, 0);
-+}
-+
-+
- void mconsole_proc(struct mc_request *req)
- {
- 	struct vfsmount *mnt = proc_mnt;
-@@ -189,6 +244,7 @@ void mconsole_proc(struct mc_request *re
-     stop - pause the UML; it will do nothing until it receives a 'go' \n\
-     go - continue the UML after a 'stop' \n\
-     log <string> - make UML enter <string> into the kernel log\n\
-+    exec <string> - pass <string> to /bin/sh -c synchronously\n\
-     proc <file> - returns the contents of the UML's /proc/<file>\n\
-     stack <pid> - returns the stack of the specified pid\n\
- "
---- a/arch/um/drivers/mconsole_user.c
-+++ b/arch/um/drivers/mconsole_user.c
-@@ -30,6 +30,7 @@ static struct mconsole_command commands[
- 	{ "stop", mconsole_stop, MCONSOLE_PROC },
- 	{ "go", mconsole_go, MCONSOLE_INTR },
- 	{ "log", mconsole_log, MCONSOLE_INTR },
-+	{ "exec", mconsole_exec, MCONSOLE_PROC },
- 	{ "proc", mconsole_proc, MCONSOLE_PROC },
- 	{ "stack", mconsole_stack, MCONSOLE_INTR },
- };
---- a/arch/um/os-Linux/file.c
-+++ b/arch/um/os-Linux/file.c
-@@ -560,6 +560,8 @@ int os_create_unix_socket(const char *fi
- 
- 	addr.sun_family = AF_UNIX;
- 
-+	if (len > sizeof(addr.sun_path))
-+		len = sizeof(addr.sun_path);
- 	snprintf(addr.sun_path, len, "%s", file);
- 
- 	err = bind(sock, (struct sockaddr *) &addr, sizeof(addr));
---- a/include/linux/kmod.h
-+++ b/include/linux/kmod.h
-@@ -32,4 +32,6 @@ static inline int request_module_nowait(
- #define try_then_request_module(x, mod...) (x)
- #endif
- 
-+int call_usermodehelper_stdoutpipe(struct subprocess_info *sub_info, struct file **filp);
-+
- #endif /* __LINUX_KMOD_H__ */
---- a/include/linux/umh.h
-+++ b/include/linux/umh.h
-@@ -22,6 +22,7 @@ struct subprocess_info {
- 	const char *path;
- 	char **argv;
- 	char **envp;
-+	struct file *stdout;
- 	int wait;
- 	int retval;
- 	int (*init)(struct subprocess_info *info, struct cred *new);
---- a/kernel/umh.c
-+++ b/kernel/umh.c
-@@ -27,6 +27,7 @@
- #include <linux/ptrace.h>
- #include <linux/async.h>
- #include <linux/uaccess.h>
-+#include <linux/pipe_fs_i.h>
- 
- #include <trace/events/module.h>
- 
-@@ -72,6 +73,28 @@ static int call_usermodehelper_exec_asyn
- 	flush_signal_handlers(current, 1);
- 	spin_unlock_irq(&current->sighand->siglock);
- 
-+	/* Install output when needed */
-+	if (sub_info->stdout) {
-+		struct files_struct *f = current->files;
-+		struct fdtable *fdt;
-+
-+		sys_close(1);
-+		sys_close(2);
-+		get_file(sub_info->stdout);
-+		fd_install(1, sub_info->stdout);
-+		fd_install(2, sub_info->stdout);
-+		spin_lock(&f->file_lock);
-+		fdt = files_fdtable(f);
-+		__set_bit(1, fdt->open_fds);
-+		__clear_bit(1, fdt->close_on_exec);
-+		__set_bit(2, fdt->open_fds);
-+		__clear_bit(2, fdt->close_on_exec);
-+		spin_unlock(&f->file_lock);
-+
-+		/* disallow core files */
-+		current->signal->rlim[RLIMIT_CORE] = (struct rlimit){0, 0};
-+	}
-+
- 	/*
- 	 * Initial kernel threads share ther FS with init, in order to
- 	 * get the init root directory. But we've now created a new
-@@ -330,6 +353,20 @@ static void helper_unlock(void)
- 		wake_up(&running_helpers_waitq);
- }
- 
-+int call_usermodehelper_stdoutpipe(struct subprocess_info *sub_info,
-+					struct file **filp)
-+{
-+	struct file *f[2];
-+
-+	if (create_pipe_files(f, 0) < 0)
-+		 return PTR_ERR(f);
-+
-+	sub_info->stdout = f[1];
-+	*filp = f[0];
-+	return 0;
-+}
-+EXPORT_SYMBOL(call_usermodehelper_stdoutpipe);
-+
- /**
-  * call_usermodehelper_setup - prepare to call a usermode helper
-  * @path: path to usermode executable
diff --git a/target/linux/uml/patches-5.10/102-pseudo-random-mac.patch b/target/linux/uml/patches-5.10/102-pseudo-random-mac.patch
deleted file mode 100644
index a4e6500f94e2..000000000000
--- a/target/linux/uml/patches-5.10/102-pseudo-random-mac.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-===============================================================================
-
-This patch makes MAC addresses of network interfaces predictable. In
-particular, it adds a small routine that computes MAC addresses of based on
-a SHA1 hash of the virtual machine name and interface ID.
-
-TECHNICAL INFORMATION:
-
-Applies to vanilla kernel 3.9.4.
-
-===============================================================================
---- a/arch/um/drivers/Kconfig
-+++ b/arch/um/drivers/Kconfig
-@@ -146,6 +146,20 @@ config UML_NET
- 	  enable at least one of the following transport options to actually
- 	  make use of UML networking.
- 
-+config UML_NET_DETERMINISTIC_MAC
-+	bool "Use deterministic MAC addresses for network interfaces"
-+	default y
-+	depends on UML_NET
-+	select CRYPTO_SHA1
-+	help
-+        Virtual network devices inside a User-Mode Linux instance must be
-+        assigned a MAC (Ethernet) address. If none is specified on the UML
-+        command line, one must be automatically computed. If this option is
-+        enabled, a randomly generated address is used. Otherwise, if this
-+        option is disabled, the address is generated from a SHA1 hash of
-+        the umid of the UML instance and the interface name. The latter choice
-+        is useful to make MAC addresses predictable.
-+
- config UML_NET_ETHERTAP
- 	bool "Ethertap transport (obsolete)"
- 	depends on UML_NET
---- a/arch/um/drivers/net_kern.c
-+++ b/arch/um/drivers/net_kern.c
-@@ -25,6 +25,14 @@
- #include <net_kern.h>
- #include <net_user.h>
- 
-+#include <crypto/sha.h>
-+#include <crypto/hash.h>
-+#include <linux/string.h>
-+#include <linux/crypto.h>
-+#include <linux/err.h>
-+#include <linux/scatterlist.h>
-+#include "os.h"
-+
- #define DRIVER_NAME "uml-netdev"
- 
- static DEFINE_SPINLOCK(opened_lock);
-@@ -274,9 +282,51 @@ static const struct ethtool_ops uml_net_
- 	.get_ts_info	= ethtool_op_get_ts_info,
- };
- 
-+#ifdef CONFIG_UML_NET_DETERMINISTIC_MAC
-+
-+/* Compute a SHA1 hash of the UML instance's id and
-+ *  * an interface name. */
-+static int compute_hash(const char *umid, const char *ifname, char *hash)
-+{
-+	struct ahash_request *desc;
-+	struct crypto_ahash *tfm;
-+	struct scatterlist sg;
-+	char vmif[1024];
-+	int ret;
-+
-+	strcpy (vmif, umid);
-+	strcat (vmif, ifname);
-+
-+	tfm = crypto_alloc_ahash("sha1", 0, CRYPTO_ALG_ASYNC);
-+	if (IS_ERR(tfm))
-+		return -ENOMEM;
-+
-+	desc = ahash_request_alloc(tfm, GFP_KERNEL);
-+	if (!desc) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	crypto_ahash_clear_flags(tfm, ~0);
-+
-+	sg_init_table(&sg, 1);
-+	sg_set_buf(&sg, vmif, strlen(vmif));
-+
-+	ahash_request_set_crypt(desc, &sg, hash, strlen(vmif));
-+
-+	ret = crypto_ahash_digest(desc);
-+out:
-+	crypto_free_ahash(tfm);
-+
-+	return ret;
-+}
-+
-+#endif
-+
- void uml_net_setup_etheraddr(struct net_device *dev, char *str)
- {
- 	unsigned char *addr = dev->dev_addr;
-+	u8 hash[SHA1_DIGEST_SIZE];
- 	char *end;
- 	int i;
- 
-@@ -319,9 +369,26 @@ void uml_net_setup_etheraddr(struct net_
- 	return;
- 
- random:
-+#ifndef CONFIG_UML_NET_DETERMINISTIC_MAC
- 	printk(KERN_INFO
- 	       "Choosing a random ethernet address for device %s\n", dev->name);
- 	eth_hw_addr_random(dev);
-+#else
-+	printk(KERN_INFO
-+	       "Computing a digest to use as ethernet address for device %s\n", dev->name);
-+	if (compute_hash(get_umid(), dev->name, hash) < 0) {
-+		printk(KERN_WARNING
-+		       "Could not compute digest to use as ethernet address for device %s. "
-+		       "Using random address instead.\n", dev->name);
-+		random_ether_addr(addr);
-+	}
-+	else {
-+		for (i=0; i < 6; i++)
-+			addr[i] = (hash[i] + hash[i+6]) % 0x100;
-+	}
-+	addr [0] &= 0xfe; /* clear multicast bit */
-+	addr [0] |= 0x02; /* set local assignment bit (IEEE802) */
-+#endif
- }
- 
- static DEFINE_SPINLOCK(devices_lock);
---- a/kernel/umh.c
-+++ b/kernel/umh.c
-@@ -354,12 +354,12 @@ static void helper_unlock(void)
- }
- 
- int call_usermodehelper_stdoutpipe(struct subprocess_info *sub_info,
--					struct file **filp)
-+				   struct file **filp)
- {
- 	struct file *f[2];
- 
- 	if (create_pipe_files(f, 0) < 0)
--		 return PTR_ERR(f);
-+		return PTR_ERR(f);
- 
- 	sub_info->stdout = f[1];
- 	*filp = f[0];
diff --git a/target/linux/x86/64/config-5.10 b/target/linux/x86/64/config-5.10
deleted file mode 100644
index 1515f9093210..000000000000
--- a/target/linux/x86/64/config-5.10
+++ /dev/null
@@ -1,510 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-# CONFIG_ACPI_BGRT is not set
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_CMPC is not set
-CONFIG_ACPI_CONTAINER=y
-CONFIG_ACPI_CPPC_LIB=y
-CONFIG_ACPI_CPU_FREQ_PSS=y
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DEBUGGER is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_DPTF is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-CONFIG_ACPI_FAN=y
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_HOTPLUG_IOAPIC=y
-# CONFIG_ACPI_I2C_OPREGION is not set
-CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
-CONFIG_ACPI_LPIT=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-CONFIG_ACPI_PROCESSOR_CSTATE=y
-CONFIG_ACPI_PROCESSOR_IDLE=y
-CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
-# CONFIG_ACPI_SBS is not set
-CONFIG_ACPI_SPCR_TABLE=y
-CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
-# CONFIG_ACPI_TAD is not set
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_VIDEO=y
-# CONFIG_ACPI_WMI is not set
-# CONFIG_ACRN_GUEST is not set
-CONFIG_AGP=y
-# CONFIG_AGP_AMD64 is not set
-CONFIG_AGP_INTEL=y
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_VIA is not set
-CONFIG_AMD_IOMMU=y
-# CONFIG_AMD_IOMMU_V2 is not set
-CONFIG_ARCH_CPUIDLE_HALTPOLL=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
-CONFIG_ARCH_MMAP_RND_BITS=28
-CONFIG_ARCH_MMAP_RND_BITS_MAX=32
-CONFIG_ARCH_MMAP_RND_BITS_MIN=28
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_WANTS_THP_SWAP=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_BLK_DEV_INTEGRITY_T10=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_PM=y
-# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
-CONFIG_BTT=y
-CONFIG_CDROM=y
-CONFIG_CONNECTOR=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
-CONFIG_CPU_RMAP=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_AES_NI_INTEL=y
-CONFIG_CRYPTO_BLAKE2S_X86=y
-# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
-# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
-# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
-# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
-# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
-# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
-CONFIG_CRYPTO_CRCT10DIF=y
-# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
-CONFIG_CRYPTO_CRYPTD=y
-# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_GLUE_HELPER_X86=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
-CONFIG_CRYPTO_LRW=y
-# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
-# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
-# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
-# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
-# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
-# CONFIG_CRYPTO_SHA1_SSSE3 is not set
-# CONFIG_CRYPTO_SHA256_SSSE3 is not set
-# CONFIG_CRYPTO_SHA512_SSSE3 is not set
-CONFIG_CRYPTO_SIMD=y
-# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
-# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
-# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
-CONFIG_CRYPTO_XTS=y
-# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
-CONFIG_DMA_ACPI=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DRM=y
-CONFIG_DRM_BOCHS=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_GEM_SHMEM_HELPER=y
-CONFIG_DRM_I915=y
-CONFIG_DRM_I915_CAPTURE_ERROR=y
-CONFIG_DRM_I915_COMPRESS_ERROR=y
-# CONFIG_DRM_I915_DEBUG is not set
-# CONFIG_DRM_I915_DEBUG_GUC is not set
-# CONFIG_DRM_I915_DEBUG_MMIO is not set
-# CONFIG_DRM_I915_DEBUG_RUNTIME_PM is not set
-# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
-CONFIG_DRM_I915_FENCE_TIMEOUT=10000
-CONFIG_DRM_I915_FORCE_PROBE=""
-CONFIG_DRM_I915_GVT=y
-CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
-# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
-CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
-CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
-# CONFIG_DRM_I915_SELFTEST is not set
-CONFIG_DRM_I915_STOP_TIMEOUT=100
-# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set
-# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
-CONFIG_DRM_I915_TIMESLICE_DURATION=1
-CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
-CONFIG_DRM_I915_USERPTR=y
-# CONFIG_DRM_I915_WERROR is not set
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_MIPI_DSI=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_TTM=y
-CONFIG_DRM_TTM_DMA_PAGE_POOL=y
-CONFIG_DRM_TTM_HELPER=y
-CONFIG_DRM_VIRTIO_GPU=y
-CONFIG_DRM_VRAM_HELPER=y
-CONFIG_EFI=y
-CONFIG_EFIVAR_FS=m
-# CONFIG_EFI_BOOTLOADER_CONTROL is not set
-# CONFIG_EFI_CAPSULE_LOADER is not set
-# CONFIG_EFI_CUSTOM_SSDT_OVERLAYS is not set
-# CONFIG_EFI_DISABLE_PCI_DMA is not set
-CONFIG_EFI_EARLYCON=y
-CONFIG_EFI_ESRT=y
-# CONFIG_EFI_FAKE_MEMMAP is not set
-CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
-# CONFIG_EFI_MIXED is not set
-# CONFIG_EFI_PGT_DUMP is not set
-# CONFIG_EFI_RCI2_TABLE is not set
-CONFIG_EFI_RUNTIME_MAP=y
-CONFIG_EFI_RUNTIME_WRAPPERS=y
-CONFIG_EFI_STUB=y
-# CONFIG_EFI_TEST is not set
-# CONFIG_EFI_VARS is not set
-CONFIG_FAILOVER=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_EFI=y
-CONFIG_FB_HYPERV=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SIMPLE=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_VESA is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FREEZER=y
-CONFIG_FUSION_SAS=y
-CONFIG_FW_CACHE=y
-CONFIG_GART_IOMMU=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_GPIO_ACPI=y
-CONFIG_GPIO_ICH=y
-CONFIG_GPIO_SCH=y
-CONFIG_HALTPOLL_CPUIDLE=y
-CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
-CONFIG_HDMI=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HID_BATTERY_STRENGTH=y
-CONFIG_HID_GENERIC=y
-CONFIG_HID_HYPERV_MOUSE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_SMT=y
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-# CONFIG_HP_ACCEL is not set
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
-CONFIG_HW_RANDOM_AMD=y
-CONFIG_HW_RANDOM_INTEL=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_HYPERV=y
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_HYPERV_BALLOON=y
-CONFIG_HYPERV_IOMMU=y
-CONFIG_HYPERV_KEYBOARD=y
-CONFIG_HYPERV_NET=y
-CONFIG_HYPERV_STORAGE=y
-# CONFIG_HYPERV_TESTING is not set
-CONFIG_HYPERV_TIMER=y
-CONFIG_HYPERV_UTILS=y
-# CONFIG_HYPERV_VSOCKETS is not set
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_AMD_MP2 is not set
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_MULTI_INSTANTIATE is not set
-# CONFIG_IA32_EMULATION is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
-CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
-CONFIG_INTEL_GTT=y
-CONFIG_INTEL_IDLE=y
-CONFIG_INTEL_IOMMU=y
-# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
-CONFIG_INTEL_IOMMU_FLOPPY_WA=y
-# CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON is not set
-# CONFIG_INTEL_IOMMU_SVM is not set
-# CONFIG_INTEL_IPS is not set
-# CONFIG_INTEL_MEI_HDCP is not set
-# CONFIG_INTEL_MENLOW is not set
-CONFIG_INTEL_PCH_THERMAL=y
-# CONFIG_INTEL_SCU_PLATFORM is not set
-CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
-CONFIG_INTEL_SOC_DTS_THERMAL=y
-# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
-# CONFIG_INTEL_TURBO_MAX_3 is not set
-# CONFIG_INTEL_TXT is not set
-# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
-CONFIG_INTERVAL_TREE=y
-CONFIG_IOASID=y
-CONFIG_IOMMU_API=y
-# CONFIG_IOMMU_DEBUG is not set
-# CONFIG_IOMMU_DEBUGFS is not set
-CONFIG_IOMMU_DMA=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_IOMMU_IOVA=y
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IOSF_MBI=y
-# CONFIG_IOSF_MBI_DEBUG is not set
-CONFIG_IRQ_MSI_IOMMU=y
-CONFIG_IRQ_REMAP=y
-# CONFIG_ISCSI_IBFT is not set
-CONFIG_ISO9660_FS=y
-CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
-CONFIG_KCMP=y
-CONFIG_KVM_GUEST=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEGACY_VSYSCALL_EMULATE is not set
-CONFIG_LEGACY_VSYSCALL_NONE=y
-# CONFIG_LEGACY_VSYSCALL_XONLY is not set
-CONFIG_LIBNVDIMM=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LPC_ICH=y
-CONFIG_LPC_SCH=y
-CONFIG_MAILBOX=y
-# CONFIG_MAXSMP is not set
-CONFIG_MEMORY_BALLOON=y
-CONFIG_MEMREGION=y
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_INTEL_LPSS_ACPI is not set
-# CONFIG_MFD_INTEL_PMC_BXT is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ACPI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_PCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMU_NOTIFIER=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPSC is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_ND_BLK=y
-CONFIG_ND_BTT=y
-CONFIG_ND_CLAIM=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FAILOVER=y
-CONFIG_NET_FLOW_LIMIT=y
-# CONFIG_NITRO_ENCLAVES is not set
-CONFIG_NR_CPUS=512
-CONFIG_NR_CPUS_DEFAULT=512
-CONFIG_NR_CPUS_RANGE_BEGIN=2
-CONFIG_NR_CPUS_RANGE_END=512
-CONFIG_NVME_CORE=y
-# CONFIG_NVME_HWMON is not set
-CONFIG_NVME_MULTIPATH=y
-# CONFIG_NVME_TCP is not set
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_PADATA=y
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_REPORTING=y
-CONFIG_PAGE_TABLE_ISOLATION=y
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_CLOCK=y
-# CONFIG_PARAVIRT_DEBUG is not set
-CONFIG_PARAVIRT_SPINLOCKS=y
-CONFIG_PARAVIRT_XXL=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_TIMINGS=y
-CONFIG_PATA_VIA=y
-CONFIG_PCC=y
-# CONFIG_PCENGINES_APU2 is not set
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_HYPERV=y
-CONFIG_PCI_HYPERV_INTERFACE=y
-# CONFIG_PCI_MMCONFIG is not set
-CONFIG_PCI_XEN=y
-CONFIG_PGTABLE_LEVELS=4
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BAYTRAIL=y
-CONFIG_PINCTRL_BROXTON=y
-CONFIG_PINCTRL_CANNONLAKE=y
-CONFIG_PINCTRL_CHERRYVIEW=y
-CONFIG_PINCTRL_DENVERTON=y
-CONFIG_PINCTRL_EMMITSBURG=y
-CONFIG_PINCTRL_GEMINILAKE=y
-CONFIG_PINCTRL_INTEL=y
-CONFIG_PINCTRL_JASPERLAKE=y
-CONFIG_PINCTRL_LEWISBURG=y
-CONFIG_PINCTRL_LYNXPOINT=y
-CONFIG_PINCTRL_SUNRISEPOINT=y
-CONFIG_PINCTRL_TIGERLAKE=y
-CONFIG_PM=y
-# CONFIG_PMIC_OPREGION is not set
-CONFIG_PM_CLK=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PVH=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-CONFIG_RELAY=y
-CONFIG_RELOCATABLE=y
-CONFIG_RESET_ATTACK_MITIGATION=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-# CONFIG_SAMSUNG_Q10 is not set
-CONFIG_SATA_AHCI=y
-CONFIG_SCHED_MC=y
-CONFIG_SCHED_MC_PRIO=y
-CONFIG_SCHED_SMT=y
-CONFIG_SCSI_VIRTIO=y
-# CONFIG_SENSORS_AMD_ENERGY is not set
-CONFIG_SENSORS_CORETEMP=y
-CONFIG_SENSORS_FAM15H_POWER=y
-CONFIG_SENSORS_I5500=y
-CONFIG_SENSORS_K10TEMP=y
-CONFIG_SENSORS_K8TEMP=y
-CONFIG_SENSORS_VIA_CPUTEMP=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-# CONFIG_SPARSEMEM_VMEMMAP is not set
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_STACK_VALIDATION=y
-# CONFIG_SURFACE_3_POWER_OPREGION is not set
-# CONFIG_SURFACE_PRO3_BUTTON is not set
-CONFIG_SWIOTLB=y
-CONFIG_SWIOTLB_XEN=y
-CONFIG_SYNC_FILE=y
-# CONFIG_SYSTEM76_ACPI is not set
-CONFIG_SYS_HYPERVISOR=y
-CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_WRITABLE_TRIPS=y
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-# CONFIG_UACCE is not set
-# CONFIG_UCLAMP_TASK is not set
-CONFIG_UCS2_STRING=y
-# CONFIG_UNWINDER_ORC is not set
-CONFIG_USB_STORAGE=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-# CONFIG_VIRTIO_PMEM is not set
-# CONFIG_VIRTIO_VSOCKETS is not set
-CONFIG_VIRTIO_VSOCKETS_COMMON=y
-CONFIG_VIRT_DRIVERS=y
-CONFIG_VMAP_PFN=y
-CONFIG_VMAP_STACK=y
-# CONFIG_VMD is not set
-CONFIG_VMWARE_BALLOON=y
-CONFIG_VMWARE_PVSCSI=y
-CONFIG_VMWARE_VMCI=y
-CONFIG_VMWARE_VMCI_VSOCKETS=y
-CONFIG_VMXNET3=y
-CONFIG_VSOCKETS=y
-CONFIG_VSOCKETS_LOOPBACK=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_X86_5LEVEL is not set
-CONFIG_X86_64=y
-CONFIG_X86_64_SMP=y
-CONFIG_X86_ACPI_CPUFREQ=y
-# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
-CONFIG_X86_AMD_FREQ_SENSITIVITY=y
-# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
-CONFIG_X86_CPUID=y
-CONFIG_X86_DIRECT_GBPAGES=y
-CONFIG_X86_HV_CALLBACK_VECTOR=y
-CONFIG_X86_INTEL_LPSS=y
-# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
-CONFIG_X86_INTEL_PSTATE=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PKG_TEMP_THERMAL=y
-# CONFIG_X86_PMEM_LEGACY is not set
-CONFIG_X86_PM_TIMER=y
-# CONFIG_X86_POWERNOW_K8 is not set
-# CONFIG_X86_VSYSCALL_EMULATION is not set
-CONFIG_X86_X2APIC=y
-# CONFIG_X86_X32 is not set
-CONFIG_XEN=y
-CONFIG_XENFS=y
-CONFIG_XEN_512GB=y
-CONFIG_XEN_ACPI=y
-CONFIG_XEN_ACPI_PROCESSOR=y
-CONFIG_XEN_AUTO_XLATE=y
-# CONFIG_XEN_BACKEND is not set
-CONFIG_XEN_BALLOON=y
-CONFIG_XEN_BLKDEV_FRONTEND=y
-CONFIG_XEN_COMPAT_XENFS=y
-CONFIG_XEN_DEBUG_FS=y
-CONFIG_XEN_DEV_EVTCHN=y
-CONFIG_XEN_DOM0=y
-CONFIG_XEN_EFI=y
-CONFIG_XEN_FBDEV_FRONTEND=y
-CONFIG_XEN_GNTDEV=y
-CONFIG_XEN_GRANT_DEV_ALLOC=y
-CONFIG_XEN_HAVE_PVMMU=y
-CONFIG_XEN_HAVE_VPMU=y
-# CONFIG_XEN_MCE_LOG is not set
-CONFIG_XEN_NETDEV_FRONTEND=y
-CONFIG_XEN_PCIDEV_FRONTEND=y
-CONFIG_XEN_PRIVCMD=y
-CONFIG_XEN_PV=y
-CONFIG_XEN_PVH=y
-CONFIG_XEN_PVHVM=y
-CONFIG_XEN_PVHVM_SMP=y
-CONFIG_XEN_PV_SMP=y
-CONFIG_XEN_SAVE_RESTORE=y
-CONFIG_XEN_SCSI_FRONTEND=y
-CONFIG_XEN_SYMS=y
-CONFIG_XEN_SYS_HYPERVISOR=y
-CONFIG_XEN_WDT=y
-CONFIG_XEN_XENBUS_FRONTEND=y
-CONFIG_XPS=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/x86/config-5.10 b/target/linux/x86/config-5.10
deleted file mode 100644
index 4616fcba0785..000000000000
--- a/target/linux/x86/config-5.10
+++ /dev/null
@@ -1,432 +0,0 @@
-# CONFIG_60XX_WDT is not set
-# CONFIG_64BIT is not set
-# CONFIG_ACPI is not set
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIX is not set
-CONFIG_AMD_NB=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_CLOCKSOURCE_INIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_RANDOM=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPLIT_ARG64=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
-CONFIG_ATA=y
-CONFIG_ATA_GENERIC=y
-CONFIG_ATA_PIIX=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_CLKBLD_I8253=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_I8253=y
-CONFIG_CLKSRC_I8253=y
-CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32=y
-CONFIG_COMPAT_32BIT_TIME=y
-# CONFIG_COMPAT_VDSO is not set
-CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CPU5_WDT is not set
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_IBPB_ENTRY=y
-CONFIG_CPU_IBRS_ENTRY=y
-# CONFIG_SLS is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_CPU_SUP_CYRIX_32=y
-CONFIG_CPU_SUP_HYGON=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_TRANSMETA_32=y
-CONFIG_CPU_SUP_UMC_32=y
-CONFIG_CPU_SUP_ZHAOXIN=y
-CONFIG_CPU_UNRET_ENTRY=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CRC32_PCLMUL is not set
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
-# CONFIG_CX_ECAT is not set
-CONFIG_DCACHE_WORD_ACCESS=y
-# CONFIG_DCDBAS is not set
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-# CONFIG_DEBUG_ENTRY is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DEBUG_MISC=y
-# CONFIG_DEBUG_NMI_SELFTEST is not set
-# CONFIG_DEBUG_TLBFLUSH is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-# CONFIG_DELL_RBU is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMI=y
-CONFIG_DMIID=y
-CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
-CONFIG_DMI_SYSFS=y
-CONFIG_DNOTIFY=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-# CONFIG_EDD is not set
-# CONFIG_EISA is not set
-# CONFIG_EUROTECH_WDT is not set
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-# CONFIG_F71808E_WDT is not set
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FUSION=y
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LOGGING is not set
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_SPI=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_ENTRY=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
-CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-# CONFIG_GEOS is not set
-CONFIG_GLOB=y
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HID=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHMEM4G=y
-# CONFIG_HIGHMEM64G is not set
-CONFIG_HIGHPTE=y
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_HPET_TIMER=y
-# CONFIG_HP_WATCHDOG is not set
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_GEODE=y
-CONFIG_HW_RANDOM_VIA=y
-# CONFIG_HYPERVISOR_GUEST is not set
-CONFIG_HZ_PERIODIC=y
-CONFIG_I8253_LOCK=y
-# CONFIG_I8K is not set
-CONFIG_IA32_FEAT_CTL=y
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_IBM_RTL is not set
-# CONFIG_IE6XX_WDT is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INSTRUCTION_DECODER=y
-# CONFIG_INTEL_PCH_THERMAL is not set
-# CONFIG_INTEL_POWERCLAMP is not set
-# CONFIG_INTEL_SCU_PCI is not set
-# CONFIG_IOSF_MBI is not set
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_NONE is not set
-# CONFIG_IO_DELAY_UDELAY is not set
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISA is not set
-CONFIG_ISA_DMA_API=y
-# CONFIG_IT8712F_WDT is not set
-# CONFIG_IT87_WDT is not set
-# CONFIG_ITCO_WDT is not set
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_LEDS_CLEVO_MAIL is not set
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-# CONFIG_M486 is not set
-# CONFIG_M486SX is not set
-# CONFIG_M586 is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M586TSC is not set
-CONFIG_M686=y
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_MATOM is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MELAN is not set
-CONFIG_MEMFD_CREATE=y
-# CONFIG_MFD_INTEL_LPSS_PCI is not set
-# CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
-CONFIG_MICROCODE=y
-CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_INTEL=y
-CONFIG_MICROCODE_LATE_LOADING=y
-CONFIG_MIGRATION=y
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MODIFY_LDT_SYSCALL is not set
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MTD is not set
-CONFIG_MTRR=y
-# CONFIG_MTRR_SANITIZER is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MWINCHIPC6 is not set
-CONFIG_NAMESPACES=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NET5501 is not set
-# CONFIG_NET_NS is not set
-CONFIG_NLS=y
-# CONFIG_NOHIGHMEM is not set
-CONFIG_NR_CPUS=1
-CONFIG_NR_CPUS_DEFAULT=1
-CONFIG_NR_CPUS_RANGE_BEGIN=1
-CONFIG_NR_CPUS_RANGE_END=1
-# CONFIG_NSC_GPIO is not set
-CONFIG_NVRAM=y
-# CONFIG_OF is not set
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-# CONFIG_OLPC is not set
-CONFIG_OPROFILE_NMI_TIMER=y
-CONFIG_OUTPUT_FORMAT="elf32-i386"
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PC104=y
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_PC87413_WDT is not set
-CONFIG_PCI=y
-CONFIG_PCI_ATS=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_GOANY=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-CONFIG_PCI_IOV=y
-CONFIG_PCI_LABEL=y
-CONFIG_PCI_LOCKLESS_CONFIG=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_EVENTS_INTEL_CSTATE=y
-CONFIG_PERF_EVENTS_INTEL_RAPL=y
-CONFIG_PERF_EVENTS_INTEL_UNCORE=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYSICAL_ALIGN=0x100000
-CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_PHY_INTEL_LGM_EMMC is not set
-CONFIG_PMC_ATOM=y
-CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_PROCESSOR_SELECT is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PROC_PID_ARCH_STATUS=y
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_PUNIT_ATOM_DEBUG is not set
-CONFIG_RATIONAL=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RETHUNK=y
-CONFIG_RETPOLINE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_SATA_HOST=y
-# CONFIG_SBC7240_WDT is not set
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-# CONFIG_SC1200_WDT is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCx200=y
-CONFIG_SCx200HR_TIMER=y
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_SCx200_WDT is not set
-CONFIG_SERIAL_8250_PCI=y
-# CONFIG_SERIAL_LANTIQ is not set
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-# CONFIG_SMSC37B787_WDT is not set
-# CONFIG_SMSC_SCH311X_WDT is not set
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPECULATION_MITIGATIONS=y
-CONFIG_SRCU=y
-# CONFIG_STATIC_CALL_SELFTEST is not set
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-# CONFIG_TELCLOCK is not set
-# CONFIG_TEST_FPU is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-# CONFIG_TOSHIBA is not set
-# CONFIG_TQMX86_WDT is not set
-CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
-CONFIG_UNWINDER_FRAME_POINTER=y
-# CONFIG_UNWINDER_GUESS is not set
-CONFIG_UP_LATE_INIT=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_HID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PCI=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_PCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PCI=y
-# CONFIG_USB_XHCI_PLATFORM is not set
-# CONFIG_USER_NS is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VIA_WDT is not set
-# CONFIG_VMWARE_VMCI is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_WAFER_WDT is not set
-CONFIG_X86=y
-CONFIG_X86_32=y
-# CONFIG_X86_32_IRIS is not set
-CONFIG_X86_32_LAZY_GS=y
-# CONFIG_X86_ANCIENT_MCE is not set
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_CMOV=y
-CONFIG_X86_CMPXCHG64=y
-# CONFIG_X86_CPA_STATISTICS is not set
-# CONFIG_X86_CPUFREQ_NFORCE2 is not set
-# CONFIG_X86_CPUID is not set
-# CONFIG_X86_CPU_RESCTRL is not set
-CONFIG_X86_DEBUGCTLMSR=y
-# CONFIG_X86_DEBUG_FPU is not set
-# CONFIG_X86_DECODER_SELFTEST is not set
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_X86_FEATURE_NAMES=y
-CONFIG_X86_GENERIC=y
-# CONFIG_X86_GX_SUSPMOD is not set
-# CONFIG_X86_INTEL_PSTATE is not set
-# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
-CONFIG_X86_INTEL_TSX_MODE_OFF=y
-# CONFIG_X86_INTEL_TSX_MODE_ON is not set
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_IOPL_IOPERM=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-# CONFIG_X86_LEGACY_VM86 is not set
-CONFIG_X86_LOCAL_APIC=y
-# CONFIG_X86_LONGRUN is not set
-CONFIG_X86_MCE=y
-# CONFIG_X86_MCELOG_LEGACY is not set
-CONFIG_X86_MCE_AMD=y
-# CONFIG_X86_MCE_INJECT is not set
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=6
-CONFIG_X86_MPPARSE=y
-CONFIG_X86_MSR=y
-# CONFIG_X86_P4_CLOCKMOD is not set
-CONFIG_X86_PAT=y
-CONFIG_X86_PLATFORM_DEVICES=y
-# CONFIG_X86_POWERNOW_K6 is not set
-# CONFIG_X86_POWERNOW_K7 is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_RESERVE_LOW=64
-CONFIG_X86_SMAP=y
-# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
-# CONFIG_X86_SPEEDSTEP_ICH is not set
-# CONFIG_X86_SPEEDSTEP_SMI is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_X86_TSC=y
-CONFIG_X86_UMIP=y
-CONFIG_X86_UP_APIC=y
-CONFIG_X86_UP_IOAPIC=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_X86_VMX_FEATURE_NAMES=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/x86/generic/config-5.10 b/target/linux/x86/generic/config-5.10
deleted file mode 100644
index b683720bf86f..000000000000
--- a/target/linux/x86/generic/config-5.10
+++ /dev/null
@@ -1,449 +0,0 @@
-# CONFIG_3C515 is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-# CONFIG_ACPI_BGRT is not set
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_CMPC is not set
-CONFIG_ACPI_CONTAINER=y
-CONFIG_ACPI_CPU_FREQ_PSS=y
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DEBUGGER is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_DPTF is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-# CONFIG_ACPI_FAN is not set
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_HOTPLUG_IOAPIC=y
-# CONFIG_ACPI_I2C_OPREGION is not set
-CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-CONFIG_ACPI_PROCESSOR_CSTATE=y
-CONFIG_ACPI_PROCESSOR_IDLE=y
-CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
-# CONFIG_ACPI_SBS is not set
-CONFIG_ACPI_SPCR_TABLE=y
-CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
-CONFIG_ACPI_TAD=y
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_VIDEO=y
-# CONFIG_ACPI_WMI is not set
-CONFIG_AGP=y
-# CONFIG_AGP_ALI is not set
-# CONFIG_AGP_AMD is not set
-# CONFIG_AGP_AMD64 is not set
-# CONFIG_AGP_ATI is not set
-# CONFIG_AGP_EFFICEON is not set
-CONFIG_AGP_INTEL=y
-# CONFIG_AGP_NVIDIA is not set
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_SWORKS is not set
-# CONFIG_AGP_VIA is not set
-# CONFIG_APM is not set
-CONFIG_ARCH_CPUIDLE_HALTPOLL=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_PM=y
-# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
-CONFIG_BTT=y
-CONFIG_CDROM=y
-CONFIG_CONNECTOR=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
-CONFIG_DMA_ACPI=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DRM=y
-CONFIG_DRM_BOCHS=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_GEM_SHMEM_HELPER=y
-CONFIG_DRM_I915=y
-CONFIG_DRM_I915_CAPTURE_ERROR=y
-CONFIG_DRM_I915_COMPRESS_ERROR=y
-# CONFIG_DRM_I915_DEBUG is not set
-# CONFIG_DRM_I915_DEBUG_GUC is not set
-# CONFIG_DRM_I915_DEBUG_MMIO is not set
-# CONFIG_DRM_I915_DEBUG_RUNTIME_PM is not set
-# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
-CONFIG_DRM_I915_FENCE_TIMEOUT=10000
-CONFIG_DRM_I915_FORCE_PROBE=""
-CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
-# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
-CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
-CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
-# CONFIG_DRM_I915_SELFTEST is not set
-CONFIG_DRM_I915_STOP_TIMEOUT=100
-# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set
-# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
-CONFIG_DRM_I915_TIMESLICE_DURATION=1
-CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
-CONFIG_DRM_I915_USERPTR=y
-# CONFIG_DRM_I915_WERROR is not set
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_MIPI_DSI=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_TTM=y
-CONFIG_DRM_TTM_DMA_PAGE_POOL=y
-CONFIG_DRM_TTM_HELPER=y
-CONFIG_DRM_VIRTIO_GPU=y
-CONFIG_DRM_VRAM_HELPER=y
-CONFIG_EFI=y
-CONFIG_EFIVAR_FS=m
-# CONFIG_EFI_BOOTLOADER_CONTROL is not set
-# CONFIG_EFI_CAPSULE_LOADER is not set
-# CONFIG_EFI_CAPSULE_QUIRK_QUARK_CSH is not set
-# CONFIG_EFI_CUSTOM_SSDT_OVERLAYS is not set
-# CONFIG_EFI_DISABLE_PCI_DMA is not set
-CONFIG_EFI_EARLYCON=y
-CONFIG_EFI_ESRT=y
-# CONFIG_EFI_FAKE_MEMMAP is not set
-CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
-# CONFIG_EFI_PGT_DUMP is not set
-# CONFIG_EFI_RCI2_TABLE is not set
-CONFIG_EFI_RUNTIME_MAP=y
-CONFIG_EFI_RUNTIME_WRAPPERS=y
-CONFIG_EFI_STUB=y
-# CONFIG_EFI_TEST is not set
-# CONFIG_EFI_VARS is not set
-# CONFIG_EL3 is not set
-CONFIG_FAILOVER=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_EFI=y
-CONFIG_FB_HYPERV=y
-# CONFIG_FB_I810 is not set
-CONFIG_FB_SIMPLE=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_VESA is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FREEZER=y
-CONFIG_FW_CACHE=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_ACPI=y
-CONFIG_GUP_GET_PTE_LOW_HIGH=y
-CONFIG_HALTPOLL_CPUIDLE=y
-CONFIG_HDMI=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HID_BATTERY_STRENGTH=y
-CONFIG_HID_GENERIC=y
-CONFIG_HID_HYPERV_MOUSE=y
-# CONFIG_HIGHMEM4G is not set
-CONFIG_HIGHMEM64G=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-CONFIG_HOTPLUG_PCI_PCIE=y
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_SMT=y
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-# CONFIG_HP_ACCEL is not set
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_HYPERV=y
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_HYPERV_BALLOON=y
-CONFIG_HYPERV_KEYBOARD=y
-CONFIG_HYPERV_NET=y
-CONFIG_HYPERV_STORAGE=y
-# CONFIG_HYPERV_TESTING is not set
-CONFIG_HYPERV_TIMER=y
-CONFIG_HYPERV_UTILS=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_AMD_MP2 is not set
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_MULTI_INSTANTIATE is not set
-# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
-CONFIG_INTEL_GTT=y
-CONFIG_INTEL_IDLE=y
-# CONFIG_INTEL_IPS is not set
-# CONFIG_INTEL_MEI_HDCP is not set
-# CONFIG_INTEL_MENLOW is not set
-CONFIG_INTEL_PCH_THERMAL=y
-# CONFIG_INTEL_SCU_PLATFORM is not set
-CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
-CONFIG_INTEL_SOC_DTS_THERMAL=y
-CONFIG_INTERVAL_TREE=y
-CONFIG_IOSF_MBI=y
-# CONFIG_IOSF_MBI_DEBUG is not set
-CONFIG_IRQ_BYPASS_MANAGER=y
-CONFIG_ISA=y
-CONFIG_ISAPNP=y
-CONFIG_ISA_BUS_API=y
-# CONFIG_ISCSI_IBFT is not set
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-CONFIG_KCMP=y
-CONFIG_KVM=y
-CONFIG_KVM_AMD=y
-CONFIG_KVM_ASYNC_PF=y
-CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
-CONFIG_KVM_GUEST=y
-CONFIG_KVM_INTEL=y
-CONFIG_KVM_MMIO=y
-CONFIG_KVM_VFIO=y
-CONFIG_KVM_XFER_TO_GUEST_WORK=y
-# CONFIG_LANCE is not set
-CONFIG_LIBNVDIMM=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-# CONFIG_M686 is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_MEMORY_BALLOON=y
-CONFIG_MEMREGION=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_INTEL_LPSS=y
-CONFIG_MFD_INTEL_LPSS_ACPI=y
-# CONFIG_MFD_INTEL_PMC_BXT is not set
-# CONFIG_MIXCOMWD is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_PCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMU_NOTIFIER=y
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-# CONFIG_MOUSE_PS2_BYD is not set
-# CONFIG_MOUSE_PS2_CYPRESS is not set
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SMBUS=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_VMMOUSE is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MPENTIUM4=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_ND_BLK=y
-CONFIG_ND_BTT=y
-CONFIG_ND_CLAIM=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FAILOVER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NO_HZ=y
-CONFIG_NR_CPUS=4
-CONFIG_NR_CPUS_DEFAULT=8
-CONFIG_NR_CPUS_RANGE_BEGIN=2
-CONFIG_NR_CPUS_RANGE_END=8
-CONFIG_PADATA=y
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_REPORTING=y
-CONFIG_PAGE_TABLE_ISOLATION=y
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_CLOCK=y
-# CONFIG_PARAVIRT_DEBUG is not set
-CONFIG_PARAVIRT_SPINLOCKS=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_TIMINGS=y
-CONFIG_PATA_VIA=y
-# CONFIG_PCENGINES_APU2 is not set
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_XEN=y
-# CONFIG_PCWATCHDOG is not set
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BAYTRAIL=y
-CONFIG_PINCTRL_BROXTON=y
-CONFIG_PINCTRL_CANNONLAKE=y
-CONFIG_PINCTRL_CHERRYVIEW=y
-CONFIG_PINCTRL_DENVERTON=y
-CONFIG_PINCTRL_EMMITSBURG=y
-CONFIG_PINCTRL_GEMINILAKE=y
-CONFIG_PINCTRL_INTEL=y
-CONFIG_PINCTRL_JASPERLAKE=y
-CONFIG_PINCTRL_LEWISBURG=y
-CONFIG_PINCTRL_LYNXPOINT=y
-CONFIG_PINCTRL_SUNRISEPOINT=y
-CONFIG_PINCTRL_TIGERLAKE=y
-CONFIG_PM=y
-# CONFIG_PMIC_OPREGION is not set
-CONFIG_PM_CLK=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-# CONFIG_PNPBIOS is not set
-CONFIG_PNP_DEBUG_MESSAGES=y
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PVH=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-CONFIG_RELAY=y
-CONFIG_RELOCATABLE=y
-CONFIG_RESET_ATTACK_MITIGATION=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-# CONFIG_SAMSUNG_Q10 is not set
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_VIA=y
-CONFIG_SCHED_INFO=y
-CONFIG_SCHED_SMT=y
-# CONFIG_SCSI_FDOMAIN_ISA is not set
-CONFIG_SCSI_VIRTIO=y
-# CONFIG_SENSORS_AMD_ENERGY is not set
-CONFIG_SENSORS_CORETEMP=y
-CONFIG_SENSORS_FAM15H_POWER=y
-CONFIG_SENSORS_I5500=y
-CONFIG_SENSORS_K10TEMP=y
-CONFIG_SENSORS_K8TEMP=y
-CONFIG_SENSORS_VIA_CPUTEMP=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SMP=y
-# CONFIG_SURFACE_3_POWER_OPREGION is not set
-# CONFIG_SURFACE_PRO3_BUTTON is not set
-CONFIG_SWIOTLB=y
-CONFIG_SWIOTLB_XEN=y
-CONFIG_SYNC_FILE=y
-# CONFIG_SYSTEM76_ACPI is not set
-CONFIG_SYS_HYPERVISOR=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_WRITABLE_TRIPS=y
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-# CONFIG_UCLAMP_TASK is not set
-CONFIG_UCS2_STRING=y
-CONFIG_USB_STORAGE=y
-CONFIG_USER_RETURN_NOTIFIER=y
-CONFIG_VHOST=y
-CONFIG_VHOST_IOTLB=y
-CONFIG_VHOST_NET=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
-CONFIG_VIRTIO_INPUT=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-# CONFIG_VIRTIO_PMEM is not set
-CONFIG_VIRTUALIZATION=y
-CONFIG_VMAP_PFN=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WDT is not set
-CONFIG_X86_32_SMP=y
-CONFIG_X86_ACPI_CPUFREQ=y
-# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
-CONFIG_X86_AMD_FREQ_SENSITIVITY=y
-# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
-# CONFIG_X86_BIGSMP is not set
-CONFIG_X86_CPUID=y
-# CONFIG_X86_E_POWERSAVER is not set
-CONFIG_X86_HV_CALLBACK_VECTOR=y
-CONFIG_X86_INTEL_LPSS=y
-CONFIG_X86_INTEL_PSTATE=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=7
-CONFIG_X86_L1_CACHE_SHIFT=7
-# CONFIG_X86_LONGHAUL is not set
-CONFIG_X86_NEED_RELOCS=y
-CONFIG_X86_PAE=y
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PKG_TEMP_THERMAL=y
-# CONFIG_X86_PMEM_LEGACY is not set
-CONFIG_X86_PM_TIMER=y
-# CONFIG_X86_POWERNOW_K8 is not set
-CONFIG_XEN=y
-CONFIG_XENFS=y
-CONFIG_XEN_ACPI=y
-CONFIG_XEN_AUTO_XLATE=y
-# CONFIG_XEN_BACKEND is not set
-CONFIG_XEN_BALLOON=y
-CONFIG_XEN_BLKDEV_FRONTEND=y
-CONFIG_XEN_COMPAT_XENFS=y
-CONFIG_XEN_DEBUG_FS=y
-CONFIG_XEN_DEV_EVTCHN=y
-CONFIG_XEN_FBDEV_FRONTEND=y
-CONFIG_XEN_GNTDEV=y
-CONFIG_XEN_GRANT_DEV_ALLOC=y
-CONFIG_XEN_NETDEV_FRONTEND=y
-CONFIG_XEN_PCIDEV_FRONTEND=y
-CONFIG_XEN_PRIVCMD=y
-CONFIG_XEN_PVH=y
-CONFIG_XEN_PVHVM=y
-CONFIG_XEN_PVHVM_SMP=y
-CONFIG_XEN_SAVE_RESTORE=y
-CONFIG_XEN_SCSI_FRONTEND=y
-CONFIG_XEN_SYS_HYPERVISOR=y
-CONFIG_XEN_WDT=y
-CONFIG_XEN_XENBUS_FRONTEND=y
-CONFIG_XPS=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/target/linux/x86/geode/config-5.10 b/target/linux/x86/geode/config-5.10
deleted file mode 100644
index 579f316914c3..000000000000
--- a/target/linux/x86/geode/config-5.10
+++ /dev/null
@@ -1,139 +0,0 @@
-# CONFIG_3C515 is not set
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-CONFIG_8139TOO_8129=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-# CONFIG_ACPI_BATTERY is not set
-# CONFIG_ACPI_CMPC is not set
-# CONFIG_ACPI_CONTAINER is not set
-CONFIG_ACPI_CPU_FREQ_PSS=y
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DEBUGGER is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_DPTF is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-CONFIG_ACPI_FAN=y
-CONFIG_ACPI_HOTPLUG_IOAPIC=y
-CONFIG_ACPI_I2C_OPREGION=y
-CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-CONFIG_ACPI_PROCESSOR_CSTATE=y
-CONFIG_ACPI_PROCESSOR_IDLE=y
-CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
-# CONFIG_ACPI_SBS is not set
-CONFIG_ACPI_SPCR_TABLE=y
-CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
-CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_TINY_POWER_BUTTON is not set
-# CONFIG_ACPI_WMI is not set
-CONFIG_ALIX=y
-CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
-# CONFIG_ATA_PIIX is not set
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CS5535_CLOCK_EVENT_SRC=y
-CONFIG_CS5535_MFGPT=y
-CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
-CONFIG_DMA_ACPI=y
-# CONFIG_EL3 is not set
-CONFIG_GEODE_WDT=y
-CONFIG_GEOS=y
-CONFIG_GPIO_ACPI=y
-CONFIG_GPIO_CS5535=y
-# CONFIG_HPET is not set
-# CONFIG_HP_ACCEL is not set
-CONFIG_HWMON=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCA=y
-CONFIG_I2C_ALGOPCF=y
-# CONFIG_I2C_AMD_MP2 is not set
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_MULTI_INSTANTIATE is not set
-# CONFIG_INTEL_IPS is not set
-# CONFIG_INTEL_MENLOW is not set
-# CONFIG_INTEL_SCU_PLATFORM is not set
-# CONFIG_INTEL_SOC_DTS_THERMAL is not set
-CONFIG_IOSF_MBI=y
-# CONFIG_IOSF_MBI_DEBUG is not set
-CONFIG_ISA=y
-# CONFIG_ISAPNP is not set
-CONFIG_ISA_BUS_API=y
-# CONFIG_ISCSI_IBFT is not set
-# CONFIG_LANCE is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_M686 is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_MFD_CORE=y
-CONFIG_MFD_CS5535=y
-# CONFIG_MFD_INTEL_LPSS_ACPI is not set
-# CONFIG_MFD_INTEL_PMC_BXT is not set
-CONFIG_MGEODEGX1=y
-# CONFIG_MIXCOMWD is not set
-CONFIG_NATSEMI=y
-CONFIG_NET5501=y
-CONFIG_NSC_GPIO=y
-CONFIG_PATA_CS5520=y
-CONFIG_PATA_CS5530=y
-CONFIG_PATA_CS5535=y
-CONFIG_PATA_CS5536=y
-CONFIG_PATA_SC1200=y
-CONFIG_PC8736x_GPIO=y
-# CONFIG_PCENGINES_APU2 is not set
-CONFIG_PCI_MMCONFIG=y
-# CONFIG_PCWATCHDOG is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_BAYTRAIL is not set
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CANNONLAKE is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
-# CONFIG_PINCTRL_DENVERTON is not set
-# CONFIG_PINCTRL_EMMITSBURG is not set
-# CONFIG_PINCTRL_GEMINILAKE is not set
-# CONFIG_PINCTRL_JASPERLAKE is not set
-# CONFIG_PINCTRL_LEWISBURG is not set
-# CONFIG_PINCTRL_LYNXPOINT is not set
-# CONFIG_PINCTRL_SUNRISEPOINT is not set
-# CONFIG_PINCTRL_TIGERLAKE is not set
-# CONFIG_PMIC_OPREGION is not set
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-# CONFIG_PNPBIOS is not set
-CONFIG_PNP_DEBUG_MESSAGES=y
-CONFIG_RTC_I2C_AND_SPI=y
-# CONFIG_SAMSUNG_Q10 is not set
-CONFIG_SC1200_WDT=y
-# CONFIG_SCSI_FDOMAIN_ISA is not set
-CONFIG_SCx200_ACB=y
-CONFIG_SCx200_WDT=y
-# CONFIG_SENSORS_AMD_ENERGY is not set
-CONFIG_SENSORS_LM90=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-# CONFIG_SURFACE_3_POWER_OPREGION is not set
-# CONFIG_SURFACE_PRO3_BUTTON is not set
-# CONFIG_SYSTEM76_ACPI is not set
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_VIA_RHINE=y
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WDT is not set
-# CONFIG_X86_ACPI_CPUFREQ is not set
-CONFIG_X86_ALIGNMENT_16=y
-# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
-CONFIG_X86_CPUID=y
-# CONFIG_X86_E_POWERSAVER is not set
-CONFIG_X86_INTEL_LPSS=y
-# CONFIG_X86_LONGHAUL is not set
-# CONFIG_X86_MCE is not set
-CONFIG_X86_MINIMUM_CPU_FAMILY=5
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PM_TIMER=y
-CONFIG_X86_REBOOTFIXUPS=y
diff --git a/target/linux/x86/legacy/config-5.10 b/target/linux/x86/legacy/config-5.10
deleted file mode 100644
index 12330ba92fcd..000000000000
--- a/target/linux/x86/legacy/config-5.10
+++ /dev/null
@@ -1,220 +0,0 @@
-# CONFIG_3C515 is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_CMPC is not set
-# CONFIG_ACPI_CONTAINER is not set
-CONFIG_ACPI_CPU_FREQ_PSS=y
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DEBUGGER is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_DPTF is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-# CONFIG_ACPI_FAN is not set
-CONFIG_ACPI_HOTPLUG_IOAPIC=y
-# CONFIG_ACPI_I2C_OPREGION is not set
-CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-CONFIG_ACPI_PROCESSOR_CSTATE=y
-CONFIG_ACPI_PROCESSOR_IDLE=y
-CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
-# CONFIG_ACPI_SBS is not set
-CONFIG_ACPI_SPCR_TABLE=y
-CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_VIDEO=y
-# CONFIG_ACPI_WMI is not set
-CONFIG_AGP=y
-# CONFIG_AGP_ALI is not set
-# CONFIG_AGP_AMD is not set
-# CONFIG_AGP_AMD64 is not set
-# CONFIG_AGP_ATI is not set
-# CONFIG_AGP_EFFICEON is not set
-CONFIG_AGP_INTEL=y
-# CONFIG_AGP_NVIDIA is not set
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_SWORKS is not set
-# CONFIG_AGP_VIA is not set
-CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CDROM=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_DMA_ACPI=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DRM=y
-CONFIG_DRM_AMDGPU=y
-# CONFIG_DRM_AMD_DC is not set
-CONFIG_DRM_BOCHS=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_I915=y
-CONFIG_DRM_I915_CAPTURE_ERROR=y
-CONFIG_DRM_I915_COMPRESS_ERROR=y
-# CONFIG_DRM_I915_DEBUG is not set
-# CONFIG_DRM_I915_DEBUG_GUC is not set
-# CONFIG_DRM_I915_DEBUG_MMIO is not set
-# CONFIG_DRM_I915_DEBUG_RUNTIME_PM is not set
-# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
-CONFIG_DRM_I915_FENCE_TIMEOUT=10000
-CONFIG_DRM_I915_FORCE_PROBE=""
-CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
-# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
-CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
-CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
-# CONFIG_DRM_I915_SELFTEST is not set
-CONFIG_DRM_I915_STOP_TIMEOUT=100
-# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set
-# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
-CONFIG_DRM_I915_TIMESLICE_DURATION=1
-CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
-CONFIG_DRM_I915_USERPTR=y
-# CONFIG_DRM_I915_WERROR is not set
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_MIPI_DSI=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_RADEON=y
-CONFIG_DRM_SCHED=y
-CONFIG_DRM_TTM=y
-CONFIG_DRM_TTM_HELPER=y
-CONFIG_DRM_VRAM_HELPER=y
-# CONFIG_EL3 is not set
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_I810 is not set
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_VESA is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_HDMI=y
-CONFIG_HID_BATTERY_STRENGTH=y
-# CONFIG_HIGHMEM4G is not set
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-# CONFIG_HP_ACCEL is not set
-CONFIG_HWMON=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_AMD_MP2 is not set
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_MULTI_INSTANTIATE is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INTEL_GTT=y
-CONFIG_INTEL_IDLE=y
-# CONFIG_INTEL_IPS is not set
-# CONFIG_INTEL_MEI_HDCP is not set
-# CONFIG_INTEL_MENLOW is not set
-# CONFIG_INTEL_SCU_PLATFORM is not set
-# CONFIG_INTEL_SOC_DTS_THERMAL is not set
-CONFIG_INTERVAL_TREE=y
-CONFIG_IOSF_MBI=y
-# CONFIG_IOSF_MBI_DEBUG is not set
-CONFIG_ISA=y
-CONFIG_ISAPNP=y
-CONFIG_ISA_BUS_API=y
-# CONFIG_ISCSI_IBFT is not set
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-CONFIG_KCMP=y
-# CONFIG_LANCE is not set
-CONFIG_M586MMX=y
-# CONFIG_M686 is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_MFD_CORE=y
-CONFIG_MFD_INTEL_LPSS=y
-CONFIG_MFD_INTEL_LPSS_ACPI=y
-# CONFIG_MFD_INTEL_PMC_BXT is not set
-# CONFIG_MIXCOMWD is not set
-CONFIG_MMU_NOTIFIER=y
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-# CONFIG_MOUSE_PS2_BYD is not set
-# CONFIG_MOUSE_PS2_CYPRESS is not set
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SMBUS=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_NOHIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_LEGACY=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_SIS=y
-CONFIG_PATA_TIMINGS=y
-CONFIG_PATA_VIA=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_MMCONFIG=y
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_PMIC_OPREGION is not set
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-# CONFIG_PNPBIOS is not set
-CONFIG_PNP_DEBUG_MESSAGES=y
-CONFIG_RAS=y
-CONFIG_RELAY=y
-CONFIG_RTC_I2C_AND_SPI=y
-# CONFIG_SAMSUNG_Q10 is not set
-CONFIG_SATA_AHCI=y
-# CONFIG_SCSI_FDOMAIN_ISA is not set
-# CONFIG_SENSORS_AMD_ENERGY is not set
-CONFIG_SERIAL_8250_PNP=y
-# CONFIG_SURFACE_3_POWER_OPREGION is not set
-# CONFIG_SURFACE_PRO3_BUTTON is not set
-CONFIG_SYNC_FILE=y
-# CONFIG_SYSTEM76_ACPI is not set
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-CONFIG_USB_STORAGE=y
-CONFIG_VMAP_PFN=y
-# CONFIG_WDT is not set
-CONFIG_X86_ACPI_CPUFREQ=y
-# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
-CONFIG_X86_ALIGNMENT_16=y
-# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
-# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
-# CONFIG_X86_E_POWERSAVER is not set
-CONFIG_X86_F00F_BUG=y
-# CONFIG_X86_INTEL_LPSS is not set
-# CONFIG_X86_LONGHAUL is not set
-CONFIG_X86_MINIMUM_CPU_FAMILY=5
-# CONFIG_X86_PAE is not set
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PM_TIMER=y
-# CONFIG_X86_POWERNOW_K8 is not set
-CONFIG_ZLIB_DEFLATE=y
diff --git a/target/linux/x86/patches-5.10/100-fix_cs5535_clockevt.patch b/target/linux/x86/patches-5.10/100-fix_cs5535_clockevt.patch
deleted file mode 100644
index d4de2027bafe..000000000000
--- a/target/linux/x86/patches-5.10/100-fix_cs5535_clockevt.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/clocksource/timer-cs5535.c
-+++ b/drivers/clocksource/timer-cs5535.c
-@@ -127,7 +127,9 @@ static irqreturn_t mfgpt_tick(int irq, v
- 		cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP,
- 				MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
- 
--	cs5535_clockevent.event_handler(&cs5535_clockevent);
-+	if (cs5535_clockevent.event_handler)
-+		cs5535_clockevent.event_handler(&cs5535_clockevent);
-+
- 	return IRQ_HANDLED;
- }
- 
diff --git a/target/linux/x86/patches-5.10/101-v5.15-mfd-lpc_ich-Enable-GPIO-driver-for-DH89xxCC.patch b/target/linux/x86/patches-5.10/101-v5.15-mfd-lpc_ich-Enable-GPIO-driver-for-DH89xxCC.patch
deleted file mode 100644
index a5bd2459ab3b..000000000000
--- a/target/linux/x86/patches-5.10/101-v5.15-mfd-lpc_ich-Enable-GPIO-driver-for-DH89xxCC.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From ef0eea5b151aefe1efea78e2fa7c507ff3c56bf0 Mon Sep 17 00:00:00 2001
-From: Chris Blake <chrisrblake93@gmail.com>
-Date: Mon, 7 Jun 2021 18:35:35 -0500
-Subject: mfd: lpc_ich: Enable GPIO driver for DH89xxCC
-
-Based on the Intel Datasheet for the DH89xxCC PCH, the GPIO driver
-is the same as ICH_v5_GPIO, minus the fact the DH89xxCC also has
-blink support. However, blink support isn't supported by the GPIO
-driver so we should use ICH_v5_GPIO. Tested and working on a Meraki
-MX100-HW.
-
-Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
-Co-developed-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
----
- drivers/mfd/lpc_ich.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mfd/lpc_ich.c
-+++ b/drivers/mfd/lpc_ich.c
-@@ -491,6 +491,7 @@ static struct lpc_ich_info lpc_chipset_i
- 	[LPC_DH89XXCC] = {
- 		.name = "DH89xxCC",
- 		.iTCO_version = 2,
-+		.gpio_version = ICH_V5_GPIO,
- 	},
- 	[LPC_PPT] = {
- 		.name = "Panther Point",
diff --git a/target/linux/x86/patches-5.10/102-v5.15-platform-x86-add-meraki-mx100-platform-driver.patch b/target/linux/x86/patches-5.10/102-v5.15-platform-x86-add-meraki-mx100-platform-driver.patch
deleted file mode 100644
index 0babc73b06fa..000000000000
--- a/target/linux/x86/patches-5.10/102-v5.15-platform-x86-add-meraki-mx100-platform-driver.patch
+++ /dev/null
@@ -1,291 +0,0 @@
-From 636a1e697555e73c28cdd6952a409edbfdd16475 Mon Sep 17 00:00:00 2001
-From: Chris Blake <chrisrblake93@gmail.com>
-Date: Mon, 9 Aug 2021 19:40:21 -0500
-Subject: platform/x86: add meraki-mx100 platform driver
-
-This adds platform support for the Cisco Meraki MX100 (Tinkerbell)
-network appliance. This sets up the network LEDs and Reset
-button.
-
-Depends-on: ef0eea5b151ae ("mfd: lpc_ich: Enable GPIO driver for DH89xxCC")
-Co-developed-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
-Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
-Link: https://lore.kernel.org/r/20210810004021.2538308-1-chrisrblake93@gmail.com
-Reviewed-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/platform/x86/Kconfig        |  13 ++
- drivers/platform/x86/Makefile       |   3 +
- drivers/platform/x86/meraki-mx100.c | 230 ++++++++++++++++++++++++++++++++++++
- 3 files changed, 246 insertions(+)
- create mode 100644 drivers/platform/x86/meraki-mx100.c
-
---- a/drivers/platform/x86/Kconfig
-+++ b/drivers/platform/x86/Kconfig
-@@ -267,6 +267,19 @@ config ASUS_NB_WMI
- 	  If you have an ACPI-WMI compatible Asus Notebook, say Y or M
- 	  here.
- 
-+config MERAKI_MX100
-+	tristate "Cisco Meraki MX100 Platform Driver"
-+	depends on GPIOLIB
-+	depends on GPIO_ICH
-+	depends on LEDS_CLASS
-+	select LEDS_GPIO
-+	help
-+	  This driver provides support for the front button and LEDs on
-+	  the Cisco Meraki MX100 (Tinkerbell) 1U appliance.
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called meraki-mx100.
-+
- config EEEPC_LAPTOP
- 	tristate "Eee PC Hotkey Driver"
- 	depends on ACPI
---- a/drivers/platform/x86/Makefile
-+++ b/drivers/platform/x86/Makefile
-@@ -33,6 +33,9 @@ obj-$(CONFIG_ASUS_NB_WMI)	+= asus-nb-wmi
- obj-$(CONFIG_EEEPC_LAPTOP)	+= eeepc-laptop.o
- obj-$(CONFIG_EEEPC_WMI)		+= eeepc-wmi.o
- 
-+# Cisco/Meraki
-+obj-$(CONFIG_MERAKI_MX100)	+= meraki-mx100.o
-+
- # Dell
- obj-$(CONFIG_DCDBAS)			+= dcdbas.o
- obj-$(CONFIG_DELL_SMBIOS)		+= dell-smbios.o
---- /dev/null
-+++ b/drivers/platform/x86/meraki-mx100.c
-@@ -0,0 +1,230 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+
-+/*
-+ * Cisco Meraki MX100 (Tinkerbell) board platform driver
-+ *
-+ * Based off of arch/x86/platform/meraki/tink.c from the
-+ * Meraki GPL release meraki-firmware-sources-r23-20150601
-+ *
-+ * Format inspired by platform/x86/pcengines-apuv2.c
-+ *
-+ * Copyright (C) 2021 Chris Blake <chrisrblake93@gmail.com>
-+ */
-+
-+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
-+
-+#include <linux/dmi.h>
-+#include <linux/err.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/gpio/machine.h>
-+#include <linux/input.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#define TINK_GPIO_DRIVER_NAME "gpio_ich"
-+
-+/* LEDs */
-+static const struct gpio_led tink_leds[] = {
-+	{
-+		.name = "mx100:green:internet",
-+		.default_trigger = "default-on",
-+	},
-+	{
-+		.name = "mx100:green:lan2",
-+	},
-+	{
-+		.name = "mx100:green:lan3",
-+	},
-+	{
-+		.name = "mx100:green:lan4",
-+	},
-+	{
-+		.name = "mx100:green:lan5",
-+	},
-+	{
-+		.name = "mx100:green:lan6",
-+	},
-+	{
-+		.name = "mx100:green:lan7",
-+	},
-+	{
-+		.name = "mx100:green:lan8",
-+	},
-+	{
-+		.name = "mx100:green:lan9",
-+	},
-+	{
-+		.name = "mx100:green:lan10",
-+	},
-+	{
-+		.name = "mx100:green:lan11",
-+	},
-+	{
-+		.name = "mx100:green:ha",
-+	},
-+	{
-+		.name = "mx100:orange:ha",
-+	},
-+	{
-+		.name = "mx100:green:usb",
-+	},
-+	{
-+		.name = "mx100:orange:usb",
-+	},
-+};
-+
-+static const struct gpio_led_platform_data tink_leds_pdata = {
-+	.num_leds	= ARRAY_SIZE(tink_leds),
-+	.leds		= tink_leds,
-+};
-+
-+static struct gpiod_lookup_table tink_leds_table = {
-+	.dev_id = "leds-gpio",
-+	.table = {
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 11,
-+				NULL, 0, GPIO_ACTIVE_LOW),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 18,
-+				NULL, 1, GPIO_ACTIVE_HIGH),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 20,
-+				NULL, 2, GPIO_ACTIVE_HIGH),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 22,
-+				NULL, 3, GPIO_ACTIVE_HIGH),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 23,
-+				NULL, 4, GPIO_ACTIVE_HIGH),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 32,
-+				NULL, 5, GPIO_ACTIVE_HIGH),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 34,
-+				NULL, 6, GPIO_ACTIVE_HIGH),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 35,
-+				NULL, 7, GPIO_ACTIVE_HIGH),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 36,
-+				NULL, 8, GPIO_ACTIVE_HIGH),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 37,
-+				NULL, 9, GPIO_ACTIVE_HIGH),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 48,
-+				NULL, 10, GPIO_ACTIVE_HIGH),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 16,
-+				NULL, 11, GPIO_ACTIVE_LOW),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 7,
-+				NULL, 12, GPIO_ACTIVE_LOW),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 21,
-+				NULL, 13, GPIO_ACTIVE_LOW),
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 19,
-+				NULL, 14, GPIO_ACTIVE_LOW),
-+		{} /* Terminating entry */
-+	}
-+};
-+
-+/* Reset Button */
-+static struct gpio_keys_button tink_buttons[] = {
-+	{
-+		.desc			= "Reset",
-+		.type			= EV_KEY,
-+		.code			= KEY_RESTART,
-+		.active_low             = 1,
-+		.debounce_interval      = 100,
-+	},
-+};
-+
-+static const struct gpio_keys_platform_data tink_buttons_pdata = {
-+	.buttons	= tink_buttons,
-+	.nbuttons	= ARRAY_SIZE(tink_buttons),
-+	.poll_interval  = 20,
-+	.rep		= 0,
-+	.name		= "mx100-keys",
-+};
-+
-+static struct gpiod_lookup_table tink_keys_table = {
-+	.dev_id = "gpio-keys-polled",
-+	.table = {
-+		GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 60,
-+				NULL, 0, GPIO_ACTIVE_LOW),
-+		{} /* Terminating entry */
-+	}
-+};
-+
-+/* Board setup */
-+static const struct dmi_system_id tink_systems[] __initconst = {
-+	{
-+		.matches = {
-+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Cisco"),
-+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MX100-HW"),
-+		},
-+	},
-+	{} /* Terminating entry */
-+};
-+MODULE_DEVICE_TABLE(dmi, tink_systems);
-+
-+static struct platform_device *tink_leds_pdev;
-+static struct platform_device *tink_keys_pdev;
-+
-+static struct platform_device * __init tink_create_dev(
-+	const char *name, const void *pdata, size_t sz)
-+{
-+	struct platform_device *pdev;
-+
-+	pdev = platform_device_register_data(NULL,
-+		name, PLATFORM_DEVID_NONE, pdata, sz);
-+	if (IS_ERR(pdev))
-+		pr_err("failed registering %s: %ld\n", name, PTR_ERR(pdev));
-+
-+	return pdev;
-+}
-+
-+static int __init tink_board_init(void)
-+{
-+	int ret;
-+
-+	if (!dmi_first_match(tink_systems))
-+		return -ENODEV;
-+
-+	/*
-+	 * We need to make sure that GPIO60 isn't set to native mode as is default since it's our
-+	 * Reset Button. To do this, write to GPIO_USE_SEL2 to have GPIO60 set to GPIO mode.
-+	 * This is documented on page 1609 of the PCH datasheet, order number 327879-005US
-+	 */
-+	outl(inl(0x530) | BIT(28), 0x530);
-+
-+	gpiod_add_lookup_table(&tink_leds_table);
-+	gpiod_add_lookup_table(&tink_keys_table);
-+
-+	tink_leds_pdev = tink_create_dev("leds-gpio",
-+		&tink_leds_pdata, sizeof(tink_leds_pdata));
-+	if (IS_ERR(tink_leds_pdev)) {
-+		ret = PTR_ERR(tink_leds_pdev);
-+		goto err;
-+	}
-+
-+	tink_keys_pdev = tink_create_dev("gpio-keys-polled",
-+		&tink_buttons_pdata, sizeof(tink_buttons_pdata));
-+	if (IS_ERR(tink_keys_pdev)) {
-+		ret = PTR_ERR(tink_keys_pdev);
-+		platform_device_unregister(tink_leds_pdev);
-+		goto err;
-+	}
-+
-+	return 0;
-+
-+err:
-+	gpiod_remove_lookup_table(&tink_keys_table);
-+	gpiod_remove_lookup_table(&tink_leds_table);
-+	return ret;
-+}
-+module_init(tink_board_init);
-+
-+static void __exit tink_board_exit(void)
-+{
-+	platform_device_unregister(tink_keys_pdev);
-+	platform_device_unregister(tink_leds_pdev);
-+	gpiod_remove_lookup_table(&tink_keys_table);
-+	gpiod_remove_lookup_table(&tink_leds_table);
-+}
-+module_exit(tink_board_exit);
-+
-+MODULE_AUTHOR("Chris Blake <chrisrblake93@gmail.com>");
-+MODULE_DESCRIPTION("Cisco Meraki MX100 Platform Driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:meraki-mx100");
diff --git a/target/linux/x86/patches-5.10/113-v5.21-platform-x86-pmc_atom-Add-Lex-3I380NX-industrial-PC-.patch b/target/linux/x86/patches-5.10/113-v5.21-platform-x86-pmc_atom-Add-Lex-3I380NX-industrial-PC-.patch
deleted file mode 100644
index 1be5c62424cc..000000000000
--- a/target/linux/x86/patches-5.10/113-v5.21-platform-x86-pmc_atom-Add-Lex-3I380NX-industrial-PC-.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Thu, 28 Jul 2022 20:06:35 +0200
-Subject: platform/x86: pmc_atom: Match all Lex BayTrail boards with
- critclk_systems DMI table
-
-The critclk_systems[] DMI match table already contains 2 Lex BayTrail
-boards and patches were just submitted to add 3 more entries for the
-following models: 3I380NX, 3I380A, 3I380CW.
-
-Looking at: https://www.lex.com.tw/products/embedded-ipc-board/
-we can see that Lex BayTrail makes many embedded boards with
-multiple ethernet boards and none of their products are battery
-powered so we don't need to worry (too much) about power consumption
-when suspended.
-
-Add a new DMI match which simply matches all Lex BayTrail boards and drop
-the 2 existing board specific quirks.
-
-Reported-by: Michael Schöne <michael.schoene@rhebo.com>
-Reported-by: Paul Spooren <paul.spooren@rhebo.com>
-Reported-by: Matwey V. Kornilov <matwey@sai.msu.ru>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
---- a/drivers/platform/x86/pmc_atom.c
-+++ b/drivers/platform/x86/pmc_atom.c
-@@ -376,19 +376,15 @@ static const struct dmi_system_id critcl
- 		},
- 	},
- 	{
--		/* pmc_plt_clk0 - 3 are used for the 4 ethernet controllers */
--		.ident = "Lex 3I380D",
-+		/*
-+		 * Lex System / Lex Computech Co. makes a lot of Bay Trail
-+		 * based embedded boards which often come with multiple
-+		 * ethernet controllers using multiple pmc_plt_clks. See:
-+		 * https://www.lex.com.tw/products/embedded-ipc-board/
-+		 */
-+		.ident = "Lex BayTrail",
- 		.matches = {
- 			DMI_MATCH(DMI_SYS_VENDOR, "Lex BayTrail"),
--			DMI_MATCH(DMI_PRODUCT_NAME, "3I380D"),
--		},
--	},
--	{
--		/* pmc_plt_clk* - are used for ethernet controllers */
--		.ident = "Lex 2I385SW",
--		.matches = {
--			DMI_MATCH(DMI_SYS_VENDOR, "Lex BayTrail"),
--			DMI_MATCH(DMI_PRODUCT_NAME, "2I385SW"),
- 		},
- 	},
- 	{
diff --git a/target/linux/x86/patches-5.10/300-pcengines_apu1_led.patch b/target/linux/x86/patches-5.10/300-pcengines_apu1_led.patch
deleted file mode 100644
index 9d1e4ab9c2a7..000000000000
--- a/target/linux/x86/patches-5.10/300-pcengines_apu1_led.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Andreas Eberlein <foodeas@aeberlein.de>
-Subject: x86: add LED support for PC Engines APU1 with mainline bios
-
-This adds support for the LEDs on PC Engines APU1 with the mainline bios.
-
-Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de>
----
---- a/drivers/leds/leds-apu.c
-+++ b/drivers/leds/leds-apu.c
-@@ -83,6 +83,7 @@ static const struct apu_led_profile apu1
- };
- 
- static const struct dmi_system_id apu_led_dmi_table[] __initconst = {
-+	/* PC Engines APU with "Legacy" bios < 4.0.8 */
- 	{
- 		.ident = "apu",
- 		.matches = {
-@@ -90,6 +91,14 @@ static const struct dmi_system_id apu_le
- 			DMI_MATCH(DMI_PRODUCT_NAME, "APU")
- 		}
- 	},
-+	/* PC Engines APU with "Mainline" bios >= 4.0.8 */
-+	{
-+		.ident = "apu",
-+		.matches = {
-+			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
-+			DMI_MATCH(DMI_PRODUCT_NAME, "apu1")
-+		}
-+	},
- 	{}
- };
- MODULE_DEVICE_TABLE(dmi, apu_led_dmi_table);
-@@ -173,7 +182,7 @@ static int __init apu_led_init(void)
- 	int err;
- 
- 	if (!(dmi_match(DMI_SYS_VENDOR, "PC Engines") &&
--	      dmi_match(DMI_PRODUCT_NAME, "APU"))) {
-+	      (dmi_match(DMI_PRODUCT_NAME, "APU") || dmi_match(DMI_PRODUCT_NAME, "apu1")))) {
- 		pr_err("No PC Engines APUv1 board detected. For APUv2,3 support, enable CONFIG_PCENGINES_APU2\n");
- 		return -ENODEV;
- 	}
-- 
2.30.2