From 1bfbf2de6df94a5e62f690bec9999702e3ad4c81 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 10 Nov 2015 23:11:10 +0000 Subject: [PATCH] ar71xx: serial: core: add support for boot console with arbitrary baud rates The Arduino Yun uses a baud rate of 250000 by default. The serial is going over the Atmel ATmega and is used to connect to this chip. Without this patch Linux wants to switch the console to 230400 Baud. With this patch Linux will use the configured baud rate and not some standard one which is near by. Signed-off-by: Hauke Mehrtens SVN-Revision: 47450 --- ...support-for-boot-console-with-arbitr.patch | 76 +++++++++++++++++++ 1 file changed, 76 insertions(+) create mode 100644 target/linux/ar71xx/patches-4.1/821-serial-core-add-support-for-boot-console-with-arbitr.patch diff --git a/target/linux/ar71xx/patches-4.1/821-serial-core-add-support-for-boot-console-with-arbitr.patch b/target/linux/ar71xx/patches-4.1/821-serial-core-add-support-for-boot-console-with-arbitr.patch new file mode 100644 index 0000000000..79150f63c2 --- /dev/null +++ b/target/linux/ar71xx/patches-4.1/821-serial-core-add-support-for-boot-console-with-arbitr.patch @@ -0,0 +1,76 @@ +From 4d3c17975c7814884a721fe693b3adf5c426d759 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Tue, 10 Nov 2015 22:18:39 +0100 +Subject: [RFC] serial: core: add support for boot console with arbitrary + baud rates + +The Arduino Yun uses a baud rate of 250000 by default. The serial is +going over the Atmel ATmega and is used to connect to this chip. +Without this patch Linux wants to switch the console to 230400 Baud. + +With this patch Linux will use the configured baud rate and not some +standard one which is near by. + +Signed-off-by: Hauke Mehrtens +--- + drivers/tty/serial/serial_core.c | 13 ++++++++++--- + include/linux/console.h | 1 + + 2 files changed, 11 insertions(+), 3 deletions(-) + +--- a/drivers/tty/serial/serial_core.c ++++ b/drivers/tty/serial/serial_core.c +@@ -164,6 +164,8 @@ static int uart_port_startup(struct tty_ + if (retval == 0) { + if (uart_console(uport) && uport->cons->cflag) { + tty->termios.c_cflag = uport->cons->cflag; ++ tty->termios.c_ospeed = uport->cons->baud; ++ tty->termios.c_ispeed = uport->cons->baud; + uport->cons->cflag = 0; + } + /* +@@ -1901,7 +1903,7 @@ static const struct baud_rates baud_rate + { 4800, B4800 }, + { 2400, B2400 }, + { 1200, B1200 }, +- { 0, B38400 } ++ { 0, BOTHER } + }; + + /** +@@ -1940,10 +1942,13 @@ uart_set_options(struct uart_port *port, + * Construct a cflag setting. + */ + for (i = 0; baud_rates[i].rate; i++) +- if (baud_rates[i].rate <= baud) ++ if (baud_rates[i].rate == baud) + break; + + termios.c_cflag |= baud_rates[i].cflag; ++ if (!baud_rates[i].rate) { ++ termios.c_ospeed = baud; ++ } + + if (bits == 7) + termios.c_cflag |= CS7; +@@ -1973,8 +1978,10 @@ uart_set_options(struct uart_port *port, + * Allow the setting of the UART parameters with a NULL console + * too: + */ +- if (co) ++ if (co) { + co->cflag = termios.c_cflag; ++ co->baud = baud; ++ } + + return 0; + } +--- a/include/linux/console.h ++++ b/include/linux/console.h +@@ -127,6 +127,7 @@ struct console { + short flags; + short index; + int cflag; ++ int baud; + void *data; + struct console *next; + }; -- 2.30.2