From 1bd0b24737710697e0a850fb1983dcdce1d01196 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 3 Feb 2016 19:05:04 +0100 Subject: [PATCH] mtd: docg3: switch to mtd_ooblayout_ops Replace the nand_ecclayout definition by the equivalent mtd_ooblayout_ops definition. Signed-off-by: Boris Brezillon Acked-by: Robert Jarzmik --- drivers/mtd/devices/docg3.c | 46 ++++++++++++++++++++++++++++--------- 1 file changed, 35 insertions(+), 11 deletions(-) diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index 6b516e14264b..b833e6cc684c 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -67,16 +67,40 @@ module_param(reliable_mode, uint, 0); MODULE_PARM_DESC(reliable_mode, "Set the docg3 mode (0=normal MLC, 1=fast, " "2=reliable) : MLC normal operations are in normal mode"); -/** - * struct docg3_oobinfo - DiskOnChip G3 OOB layout - * @eccbytes: 8 bytes are used (1 for Hamming ECC, 7 for BCH ECC) - * @eccpos: ecc positions (byte 7 is Hamming ECC, byte 8-14 are BCH ECC) - * @oobfree: free pageinfo bytes (byte 0 until byte 6, byte 15 - */ -static struct nand_ecclayout docg3_oobinfo = { - .eccbytes = 8, - .eccpos = {7, 8, 9, 10, 11, 12, 13, 14}, - .oobfree = {{0, 7}, {15, 1} }, +static int docg3_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + /* byte 7 is Hamming ECC, byte 8-14 are BCH ECC */ + oobregion->offset = 7; + oobregion->length = 8; + + return 0; +} + +static int docg3_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 1) + return -ERANGE; + + /* free bytes: byte 0 until byte 6, byte 15 */ + if (!section) { + oobregion->offset = 0; + oobregion->length = 7; + } else { + oobregion->offset = 15; + oobregion->length = 1; + } + + return 0; +} + +static const struct mtd_ooblayout_ops nand_ooblayout_docg3_ops = { + .ecc = docg3_ooblayout_ecc, + .free = docg3_ooblayout_free, }; static inline u8 doc_readb(struct docg3 *docg3, u16 reg) @@ -1857,7 +1881,7 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) mtd->_read_oob = doc_read_oob; mtd->_write_oob = doc_write_oob; mtd->_block_isbad = doc_block_isbad; - mtd_set_ecclayout(mtd, &docg3_oobinfo); + mtd_set_ooblayout(mtd, &nand_ooblayout_docg3_ops); mtd->oobavail = 8; mtd->ecc_strength = DOC_ECC_BCH_T; -- 2.30.2