From 1bc6f14a611708311f8f51e2b13c53965fc1225f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 12 Jul 2015 18:54:37 +0200 Subject: [PATCH] ddr: altera: Dissolve invocation of sdr_get_addr(&sdr_mgr_.*->.*) Instead of this indirection, just adjust the register pointer and directly use the register base address. Signed-off-by: Marek Vasut --- drivers/ddr/altera/sequencer.c | 52 +++++++++++++++++----------------- 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c index 2ff746f4e2..7ba73ab7a6 100644 --- a/drivers/ddr/altera/sequencer.c +++ b/drivers/ddr/altera/sequencer.c @@ -28,10 +28,10 @@ static struct socfpga_sdr_scc_mgr *sdr_scc_mgr = (struct socfpga_sdr_scc_mgr *)(SDR_PHYGRP_SCCGRP_ADDRESS | 0xe00); static struct socfpga_phy_mgr_cmd *phy_mgr_cmd = - (struct socfpga_phy_mgr_cmd *)(BASE_PHY_MGR); + (struct socfpga_phy_mgr_cmd *)SDR_PHYGRP_PHYMGRGRP_ADDRESS; static struct socfpga_phy_mgr_cfg *phy_mgr_cfg = - (struct socfpga_phy_mgr_cfg *)(BASE_PHY_MGR + 0x4000); + (struct socfpga_phy_mgr_cfg *)(SDR_PHYGRP_PHYMGRGRP_ADDRESS | 0x40); static struct socfpga_data_mgr *data_mgr = (struct socfpga_data_mgr *)(BASE_DATA_MGR); @@ -181,7 +181,7 @@ static void reg_file_set_sub_stage(uint32_t set_sub_stage) static void initialize(void) { - u32 addr = sdr_get_addr(&phy_mgr_cfg->mux_sel); + u32 addr = (u32)&phy_mgr_cfg->mux_sel; debug("%s:%d\n", __func__, __LINE__); /* USER calibration has control over path to memory */ @@ -193,14 +193,14 @@ static void initialize(void) writel(0x3, SOCFPGA_SDR_ADDRESS + addr); /* USER memory clock is not stable we begin initialization */ - addr = sdr_get_addr(&phy_mgr_cfg->reset_mem_stbl); + addr = (u32)&phy_mgr_cfg->reset_mem_stbl; writel(0, SOCFPGA_SDR_ADDRESS + addr); /* USER calibration status all set to zero */ - addr = sdr_get_addr(&phy_mgr_cfg->cal_status); + addr = (u32)&phy_mgr_cfg->cal_status; writel(0, SOCFPGA_SDR_ADDRESS + addr); - addr = sdr_get_addr(&phy_mgr_cfg->cal_debug_info); + addr = (u32)&phy_mgr_cfg->cal_debug_info; writel(0, SOCFPGA_SDR_ADDRESS + addr); if ((dyn_calib_steps & CALIB_SKIP_ALL) != CALIB_SKIP_ALL) { @@ -1041,7 +1041,7 @@ static void rw_mgr_mem_initialize(void) writel(RW_MGR_INIT_RESET_0_CKE_0, SOCFPGA_SDR_ADDRESS + addr); /* indicate that memory is stable */ - addr = sdr_get_addr(&phy_mgr_cfg->reset_mem_stbl); + addr = (u32)&phy_mgr_cfg->reset_mem_stbl; writel(1, SOCFPGA_SDR_ADDRESS + addr); /* @@ -1237,7 +1237,7 @@ static uint32_t rw_mgr_mem_calibrate_read_test_patterns(uint32_t rank_bgn, for (vg = RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS-1; ; vg--) { /* reset the fifos to get pointers to known state */ - addr = sdr_get_addr(&phy_mgr_cmd->fifo_reset); + addr = (u32)&phy_mgr_cmd->fifo_reset; writel(0, SOCFPGA_SDR_ADDRESS + addr); addr = sdr_get_addr((u32 *)RW_MGR_RESET_READ_DATAPATH); writel(0, SOCFPGA_SDR_ADDRESS + addr); @@ -1394,7 +1394,7 @@ static uint32_t rw_mgr_mem_calibrate_read_test(uint32_t rank_bgn, uint32_t group tmp_bit_chk = 0; for (vg = RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS-1; ; vg--) { /* reset the fifos to get pointers to known state */ - addr = sdr_get_addr(&phy_mgr_cmd->fifo_reset); + addr = (u32)&phy_mgr_cmd->fifo_reset; writel(0, SOCFPGA_SDR_ADDRESS + addr); addr = sdr_get_addr((u32 *)RW_MGR_RESET_READ_DATAPATH); writel(0, SOCFPGA_SDR_ADDRESS + addr); @@ -1449,7 +1449,7 @@ static uint32_t rw_mgr_mem_calibrate_read_test_all_ranks(uint32_t group, static void rw_mgr_incr_vfifo(uint32_t grp, uint32_t *v) { - uint32_t addr = sdr_get_addr(&phy_mgr_cmd->inc_vfifo_hard_phy); + uint32_t addr = (u32)&phy_mgr_cmd->inc_vfifo_hard_phy; writel(grp, SOCFPGA_SDR_ADDRESS + addr); (*v)++; @@ -2572,7 +2572,7 @@ static uint32_t rw_mgr_mem_calibrate_lfifo(void) rw_mgr_mem_calibrate_read_load_patterns(0, 1); found_one = 0; - addr = sdr_get_addr(&phy_mgr_cfg->phy_rlat); + addr = (u32)&phy_mgr_cfg->phy_rlat; do { writel(gbl->curr_read_lat, SOCFPGA_SDR_ADDRESS + addr); debug_cond(DLEVEL == 2, "%s:%d lfifo: read_lat=%u", @@ -2593,13 +2593,13 @@ static uint32_t rw_mgr_mem_calibrate_lfifo(void) /* reset the fifos to get pointers to known state */ - addr = sdr_get_addr(&phy_mgr_cmd->fifo_reset); + addr = (u32)&phy_mgr_cmd->fifo_reset; writel(0, SOCFPGA_SDR_ADDRESS + addr); if (found_one) { /* add a fudge factor to the read latency that was determined */ gbl->curr_read_lat += 2; - addr = sdr_get_addr(&phy_mgr_cfg->phy_rlat); + addr = (u32)&phy_mgr_cfg->phy_rlat; writel(gbl->curr_read_lat, SOCFPGA_SDR_ADDRESS + addr); debug_cond(DLEVEL == 2, "%s:%d lfifo: success: using \ read_lat=%u\n", __func__, __LINE__, @@ -2790,7 +2790,7 @@ static uint32_t rw_mgr_mem_calibrate_write_test(uint32_t rank_bgn, set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE); tmp_bit_chk = 0; - addr = sdr_get_addr(&phy_mgr_cmd->fifo_reset); + addr = (u32)&phy_mgr_cmd->fifo_reset; addr_rw_mgr = SDR_PHYGRP_RWMGRGRP_ADDRESS; for (vg = RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS-1; ; vg--) { /* reset the fifos to get pointers to known state */ @@ -3396,12 +3396,12 @@ static void mem_config(void) if (gbl->curr_read_lat > max_latency) gbl->curr_read_lat = max_latency; - addr = sdr_get_addr(&phy_mgr_cfg->phy_rlat); + addr = (u32)&phy_mgr_cfg->phy_rlat; writel(gbl->curr_read_lat, SOCFPGA_SDR_ADDRESS + addr); /* advertise write latency */ gbl->curr_write_lat = wlat; - addr = sdr_get_addr(&phy_mgr_cfg->afi_wlat); + addr = (u32)&phy_mgr_cfg->afi_wlat; writel(wlat - 2, SOCFPGA_SDR_ADDRESS + addr); /* initialize bit slips */ @@ -3488,11 +3488,11 @@ static void mem_skip_calibrate(void) * in sequencer. */ vfifo_offset = CALIB_VFIFO_OFFSET; - addr = sdr_get_addr(&phy_mgr_cmd->inc_vfifo_hard_phy); + addr = (u32)&phy_mgr_cmd->inc_vfifo_hard_phy; for (j = 0; j < vfifo_offset; j++) { writel(0xff, SOCFPGA_SDR_ADDRESS + addr); } - addr = sdr_get_addr(&phy_mgr_cmd->fifo_reset); + addr = (u32)&phy_mgr_cmd->fifo_reset; writel(0, SOCFPGA_SDR_ADDRESS + addr); /* @@ -3500,7 +3500,7 @@ static void mem_skip_calibrate(void) * generation-time constant. */ gbl->curr_read_lat = CALIB_LFIFO_OFFSET; - addr = sdr_get_addr(&phy_mgr_cfg->phy_rlat); + addr = (u32)&phy_mgr_cfg->phy_rlat; writel(gbl->curr_read_lat, SOCFPGA_SDR_ADDRESS + addr); } @@ -3704,7 +3704,7 @@ static uint32_t run_mem_calibrate(void) debug("%s:%d\n", __func__, __LINE__); /* Reset pass/fail status shown on afi_cal_success/fail */ - addr = sdr_get_addr(&phy_mgr_cfg->cal_status); + addr = (u32)&phy_mgr_cfg->cal_status; writel(PHY_MGR_CAL_RESET, SOCFPGA_SDR_ADDRESS + addr); addr = sdr_get_addr((u32 *)BASE_MMR); @@ -3720,7 +3720,7 @@ static uint32_t run_mem_calibrate(void) pass = mem_calibrate(); mem_precharge_and_activate(); - addr = sdr_get_addr(&phy_mgr_cmd->fifo_reset); + addr = (u32)&phy_mgr_cmd->fifo_reset; writel(0, SOCFPGA_SDR_ADDRESS + addr); /* @@ -3734,7 +3734,7 @@ static uint32_t run_mem_calibrate(void) * 0: AFI Mux Select * 1: DDIO Mux Select */ - addr = sdr_get_addr(&phy_mgr_cfg->mux_sel); + addr = (u32)&phy_mgr_cfg->mux_sel; writel(0x2, SOCFPGA_SDR_ADDRESS + addr); } @@ -3759,9 +3759,9 @@ static uint32_t run_mem_calibrate(void) addr = (u32)&sdr_reg_file->fom; writel(debug_info, SOCFPGA_SDR_ADDRESS + addr); - addr = sdr_get_addr(&phy_mgr_cfg->cal_debug_info); + addr = (u32)&phy_mgr_cfg->cal_debug_info; writel(debug_info, SOCFPGA_SDR_ADDRESS + addr); - addr = sdr_get_addr(&phy_mgr_cfg->cal_status); + addr = (u32)&phy_mgr_cfg->cal_status; writel(PHY_MGR_CAL_SUCCESS, SOCFPGA_SDR_ADDRESS + addr); } else { printf("%s: CALIBRATION FAILED\n", __FILE__); @@ -3772,9 +3772,9 @@ static uint32_t run_mem_calibrate(void) addr = (u32)&sdr_reg_file->failing_stage; writel(debug_info, SOCFPGA_SDR_ADDRESS + addr); - addr = sdr_get_addr(&phy_mgr_cfg->cal_debug_info); + addr = (u32)&phy_mgr_cfg->cal_debug_info; writel(debug_info, SOCFPGA_SDR_ADDRESS + addr); - addr = sdr_get_addr(&phy_mgr_cfg->cal_status); + addr = (u32)&phy_mgr_cfg->cal_status; writel(PHY_MGR_CAL_FAIL, SOCFPGA_SDR_ADDRESS + addr); /* Update the failing group/stage in the register file */ -- 2.30.2