From 1b3c360c235dc684ec06c2d5f183f0a282ce45e2 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 22 Dec 2006 14:29:40 +0100 Subject: [PATCH] [PATCH] Fix sequoia flash autodetection (finally correct) Now 32MByte and 64MByte FLASH is know to work and other configurations should work too. Signed-off-by: Stefan Roese --- board/amcc/sequoia/sequoia.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index ccf6f0c803..ff211aef2d 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -31,6 +31,8 @@ DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +ulong flash_get_size (ulong base, int banknum); + int board_early_init_f(void) { unsigned long sdr0_cust0; @@ -152,6 +154,11 @@ int misc_init_r(void) */ /* Re-do sizing to get full correct info */ + + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) mtdcr(ebccfga, pb3cr); #else @@ -192,9 +199,10 @@ int misc_init_r(void) #endif mtdcr(ebccfgd, pbcr); - /* adjust flash start and offset */ - gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; - gd->bd->bi_flashoffset = 0; + /* + * Re-check to get correct base address + */ + flash_get_size(gd->bd->bi_flashstart, 0); #ifdef CFG_ENV_IS_IN_FLASH /* Monitor protection ON by default */ -- 2.30.2