From 1aab21df9f92194f78cd5864974f5c81d426e479 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 5 Oct 2015 10:26:09 +0000 Subject: [PATCH] ramips: Allow to receive vlan over untag ports on MT7530 The MT7530 switch driver with enable_vlan set will automatically set all ports to the user port mode. The hardware will remove the incoming vlan tag on these ports and use it for its internal vlan. This is usually not wanted and makes it impossible to communicate via vlan over the switch in both directions. It is possible to configure a switch port to "transparent mode" when this port is only used as untag in the switch VLANs. This will disable the VLAN untagging of packets when they were received on this port. The tagging on "tag" ports based on the vlan id is still working. The transparent port mode cannot be used when a port is both used in a VLAN as "tag" and in another one as "untag" port. Signed-off-by: Sven Eckelmann SVN-Revision: 47114 --- .../drivers/net/ethernet/ralink/mt7530.c | 36 +++++++++++++++++-- 1 file changed, 33 insertions(+), 3 deletions(-) diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/mt7530.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/mt7530.c index 51e16f26b9c..4e00315452d 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/mt7530.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/mt7530.c @@ -484,6 +484,8 @@ mt7530_apply_config(struct switch_dev *dev) { struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); int i, j; + u8 tag_ports; + u8 untag_ports; if (!priv->global_vlan_enable) { for (i = 0; i < MT7530_NUM_PORTS; i++) @@ -499,9 +501,37 @@ mt7530_apply_config(struct switch_dev *dev) for (i = 0; i < MT7530_NUM_PORTS; i++) mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0003); - /* set all ports as user port */ - for (i = 0; i < MT7530_NUM_PORTS; i++) - mt7530_w32(priv, REG_ESW_PORT_PVC(i), 0x81000000); + /* check if a port is used in tag/untag vlan egress mode */ + tag_ports = 0; + untag_ports = 0; + + for (i = 0; i < MT7530_NUM_VLANS; i++) { + u8 member = priv->vlan_entries[i].member; + u8 etags = priv->vlan_entries[i].etags; + + if (!member) + continue; + + for (j = 0; j < MT7530_NUM_PORTS; j++) { + if (!(member & BIT(j))) + continue; + + if (etags & BIT(j)) + tag_ports |= 1u << j; + else + untag_ports |= 1u << j; + } + } + + /* set all untag-only ports as transparent and the rest as user port */ + for (i = 0; i < MT7530_NUM_PORTS; i++) { + u32 pvc_mode = 0x81000000; + + if (untag_ports & BIT(i) && !(tag_ports & BIT(i))) + pvc_mode = 0x810000c0; + + mt7530_w32(priv, REG_ESW_PORT_PVC(i), pvc_mode); + } for (i = 0; i < MT7530_NUM_VLANS; i++) { u16 vid = priv->vlan_entries[i].vid; -- 2.30.2