From 1a97a477e666cbdededab93bd3754e508f0c09d7 Mon Sep 17 00:00:00 2001 From: Max Uvarov Date: Tue, 28 May 2019 13:00:50 +0300 Subject: [PATCH] net: phy: dp83867: increase SGMII autoneg timer duration After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 are 01). That is not enough to finalize autonegatiation on some devices. Increase this timer duration to maximum supported 16ms. Signed-off-by: Max Uvarov Cc: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/dp83867.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 1091a625bf4c..14e9e8a94639 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -26,6 +26,12 @@ /* Extended Registers */ #define DP83867_CFG4 0x0031 +#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6)) +#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS (3 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_800US (2 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_2US (1 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_16MS (0 << 5) + #define DP83867_RGMIICTL 0x0032 #define DP83867_STRAP_STS1 0x006E #define DP83867_RGMIIDCTL 0x0086 @@ -292,6 +298,18 @@ static int dp83867_config_init(struct phy_device *phydev) 0); if (ret) return ret; + + /* After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 + * are 01). That is not enough to finalize autoneg on some + * devices. Increase this timer duration to maximum 16ms. + */ + ret = phy_modify_mmd(phydev, DP83867_DEVADDR, + DP83867_CFG4, + DP83867_CFG4_SGMII_ANEG_MASK, + DP83867_CFG4_SGMII_ANEG_TIMER_16MS); + + if (ret) + return ret; } /* Enable Interrupt output INT_OE in CFG3 register */ -- 2.30.2