From 19d770d7b91aaca1de18281dea0da8616df34c6c Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Sun, 4 Aug 2024 22:47:47 +0200 Subject: [PATCH] mediatek: filogic: add support for Cudy AP3000 Outdoor Hardware highlights: - MediaTek MT7981 WiSoC - 256MB DDR3 RAM - 64MB SPI-NAND - MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5) - 1x LED in two colors - 2x Button - 1x 1GbE - Two detachable antenas, two internal pcb antenas - PoE powered (standalone) MAC: LAN MAC: label mac 2.4G MAC: label mac -1 5G MAC: label mac How to install: 1. Apply Cudy Intermediate OpenWrt image for AP3000 Outdoor V1 2. Install OpenWrt sysupgrade image Signed-off-by: Pawel Dembicki Link: https://github.com/openwrt/openwrt/pull/16156 Signed-off-by: Hauke Mehrtens --- .../lib/preinit/05_set_preinit_iface | 1 + .../dts/mt7981b-cudy-ap3000outdoor-v1.dts | 209 ++++++++++++++++++ .../filogic/base-files/etc/board.d/02_network | 1 + .../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 1 + target/linux/mediatek/image/filogic.mk | 17 ++ 5 files changed, 229 insertions(+) create mode 100644 target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts diff --git a/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface b/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface index 6dfa52c291..8e74c577cd 100644 --- a/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface +++ b/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface @@ -6,6 +6,7 @@ set_preinit_iface() { ip link set eth1 up ifname=eth1 ;; + cudy,ap3000outdoor-v1|\ cudy,re3000-v1|\ ubnt,unifi-6-lr|\ zyxel,nwa50ax-pro) diff --git a/target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts new file mode 100644 index 0000000000..62e4063947 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include + +#include "mt7981.dtsi" + +/ { + model = "Cudy AP3000 Outdoor v1"; + compatible = "cudy,ap3000outdoor-v1", "mediatek,mt7981-spim-snand-rfb"; + + aliases { + label-mac-device = &gmac1; + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_red; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = ; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_green: led@0 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 10 GPIO_ACTIVE_HIGH>; + }; + + led_status_red: led_1 { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&pio 11 GPIO_ACTIVE_HIGH>; + }; + }; + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + antctrl { + /* Not sure if this pin does anything. + * It was taken from GPL sources. + * Intermediate image doesn't have it. + */ + gpio-export,name = "antctrl"; + gpio-export,output = <1>; + gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + }; + }; + + watchdog-hw { + compatible = "linux,wdt-gpio"; + gpios = <&pio 6 GPIO_ACTIVE_HIGH>; + hw_algo = "level"; + hw_margin_ms = <10000>; + always-running; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + status = "okay"; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_bdinfo_de00 1>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <52000000>; + + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x00000 0x0100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x0100000 0x0080000>; + read-only; + }; + + factory: partition@180000 { + label = "Factory"; + reg = <0x180000 0x0200000>; + read-only; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + }; + }; + + partition@380000 { + label = "bdinfo"; + reg = <0x380000 0x0040000>; + read-only; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_bdinfo_de00: macaddr@de00 { + compatible = "mac-base"; + reg = <0xde00 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + + }; + + partition@3C0000 { + label = "FIP"; + reg = <0x3C0000 0x0200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x5C0000 0x4000000>; + compatible = "linux,ubi"; + }; + }; + }; +}; + + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + }; +}; + +&wifi { + status = "okay"; + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index cf48926ad1..abe7682dfb 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -87,6 +87,7 @@ mediatek_setup_interfaces() mercusys,mr90x-v1) ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1 ;; + cudy,ap3000outdoor-v1|\ cudy,re3000-v1|\ netgear,wax220|\ ubnt,unifi-6-plus|\ diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 1605c0086d..ff9e9f881c 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -75,6 +75,7 @@ case "$board" in [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress ;; + cudy,ap3000outdoor-v1|\ cudy,m3000-v1|\ cudy,wr3000-v1) addr=$(mtd_get_mac_binary bdinfo 0xde00) diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 40e58f9754..e21794600d 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -507,6 +507,23 @@ define Device/confiabits_mt7981 endef TARGET_DEVICES += confiabits_mt7981 +define Device/cudy_ap3000outdoor-v1 + DEVICE_VENDOR := Cudy + DEVICE_MODEL := AP3000 Outdoor + DEVICE_VARIANT := v1 + DEVICE_DTS := mt7981b-cudy-ap3000outdoor-v1 + DEVICE_DTS_DIR := ../dts + SUPPORTED_DEVICES += R51 + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 65536k + KERNEL_IN_UBI := 1 + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware +endef +TARGET_DEVICES += cudy_ap3000outdoor-v1 + define Device/cudy_m3000-v1 DEVICE_VENDOR := Cudy DEVICE_MODEL := M3000 -- 2.30.2