From 19af5cdb7c79ff5ec96a99893ffb7f894f4a3dc1 Mon Sep 17 00:00:00 2001 From: Martin Olsson Date: Thu, 23 Apr 2009 11:37:37 +0200 Subject: [PATCH] trivial: fix typo milisecond/millisecond for documentation and source comments. Signed-off-by: Martin Olsson Signed-off-by: Jiri Kosina --- Documentation/CodingStyle | 4 ++-- drivers/ide/ide-atapi.c | 2 +- drivers/isdn/mISDN/dsp_core.c | 2 +- drivers/net/ipg.h | 2 +- drivers/s390/scsi/zfcp_fc.c | 2 +- drivers/scsi/dpt/osd_util.h | 2 +- drivers/usb/serial/io_ti.c | 2 +- sound/pci/vx222/vx222_ops.c | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-) diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 72968cd5eaf3..8bb37237ebd2 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -698,8 +698,8 @@ very often is not. Abundant use of the inline keyword leads to a much bigger kernel, which in turn slows the system as a whole down, due to a bigger icache footprint for the CPU and simply because there is less memory available for the pagecache. Just think about it; a pagecache miss causes a -disk seek, which easily takes 5 miliseconds. There are a LOT of cpu cycles -that can go into these 5 miliseconds. +disk seek, which easily takes 5 milliseconds. There are a LOT of cpu cycles +that can go into these 5 milliseconds. A reasonable rule of thumb is to not put inline at functions that have more than 3 lines of code in them. An exception to this rule are the cases where diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 757e5956b132..ae1cae38a078 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -577,7 +577,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive) /* * If necessary schedule the packet transfer to occur 'timeout' - * miliseconds later in ide_delayed_transfer_pc() after the + * milliseconds later in ide_delayed_transfer_pc() after the * device says it's ready for a packet. */ if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) { diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c index 3083338716b2..47dbfe298b43 100644 --- a/drivers/isdn/mISDN/dsp_core.c +++ b/drivers/isdn/mISDN/dsp_core.c @@ -502,7 +502,7 @@ tone_off: break; } dsp->cmx_delay = (*((int *)data)) << 3; - /* miliseconds to samples */ + /* milliseconds to samples */ if (dsp->cmx_delay >= (CMX_BUFF_HALF>>1)) /* clip to half of maximum usable buffer (half of half buffer) */ diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h index dd9318f19497..dfc2541bb556 100644 --- a/drivers/net/ipg.h +++ b/drivers/net/ipg.h @@ -514,7 +514,7 @@ enum ipg_regs { #define IPG_DMALIST_ALIGN_PAD 0x07 #define IPG_MULTICAST_HASHTABLE_SIZE 0x40 -/* Number of miliseconds to wait after issuing a software reset. +/* Number of milliseconds to wait after issuing a software reset. * 0x05 <= IPG_AC_RESETWAIT to account for proper 10Mbps operation. */ #define IPG_AC_RESETWAIT 0x05 diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 19ae0842047c..18fd975412d3 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -116,7 +116,7 @@ static void zfcp_wka_port_put(struct zfcp_wka_port *wka_port) { if (atomic_dec_return(&wka_port->refcount) != 0) return; - /* wait 10 miliseconds, other reqs might pop in */ + /* wait 10 milliseconds, other reqs might pop in */ schedule_delayed_work(&wka_port->work, HZ / 100); } diff --git a/drivers/scsi/dpt/osd_util.h b/drivers/scsi/dpt/osd_util.h index 4b56c0436ba2..b2613c2eaac7 100644 --- a/drivers/scsi/dpt/osd_util.h +++ b/drivers/scsi/dpt/osd_util.h @@ -342,7 +342,7 @@ uLONG osdGetThreadID(void); /* wakes up the specifed thread */ void osdWakeThread(uLONG); -/* osd sleep for x miliseconds */ +/* osd sleep for x milliseconds */ void osdSleep(uLONG); #define DPT_THREAD_PRIORITY_LOWEST 0x00 diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index eabf20eeb370..db964db42d3c 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -102,7 +102,7 @@ struct edgeport_port { __u8 shadow_mcr; __u8 shadow_lsr; __u8 lsr_mask; - __u32 ump_read_timeout; /* Number of miliseconds the UMP will + __u32 ump_read_timeout; /* Number of milliseconds the UMP will wait without data before completing a read short */ int baud_rate; diff --git a/sound/pci/vx222/vx222_ops.c b/sound/pci/vx222/vx222_ops.c index c0efe4491116..6416d3f0c7be 100644 --- a/sound/pci/vx222/vx222_ops.c +++ b/sound/pci/vx222/vx222_ops.c @@ -367,7 +367,7 @@ static int vx2_load_xilinx_binary(struct vx_core *chip, const struct firmware *x unsigned int port; const unsigned char *image; - /* XILINX reset (wait at least 1 milisecond between reset on and off). */ + /* XILINX reset (wait at least 1 millisecond between reset on and off). */ vx_outl(chip, CNTRL, VX_CNTRL_REGISTER_VALUE | VX_XILINX_RESET_MASK); vx_inl(chip, CNTRL); msleep(10); -- 2.30.2