From 1972dc0a9ef329c8b1aa27621a4033b9bb5f34a7 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 25 Sep 2005 16:27:55 +0200 Subject: [PATCH] Added support for PCI bridge on MPC8272ADS Patch by Vitaly Bordug, Feb 09 2005 --- CHANGELOG | 3 ++ board/mpc8260ads/mpc8260ads.c | 31 +++++++++++ cpu/mpc8260/pci.c | 39 ++++++++++++-- include/configs/MPC8260ADS.h | 98 +++++++++++++++++++++++++++++++++-- 4 files changed, 163 insertions(+), 8 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 54c9d7daff..97b3efe979 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes for U-Boot 1.1.4: ====================================================================== +* Added support for PCI bridge on MPC8272ADS + Patch by Vitaly Bordug, Feb 09 2005 + * Update multicore CM9XX support for Integrator AP to allow booting from flash Patch by Jean-Paul Saman, 8 Feb 2005 diff --git a/board/mpc8260ads/mpc8260ads.c b/board/mpc8260ads/mpc8260ads.c index fea9173cdd..2125963407 100644 --- a/board/mpc8260ads/mpc8260ads.c +++ b/board/mpc8260ads/mpc8260ads.c @@ -13,6 +13,10 @@ * Yuli Barcohen * Added support for SDRAM DIMMs SPD EEPROM, MII, Ethernet PHY init. * + * Copyright (c) 2005 MontaVista Software, Inc. + * Vitaly Bordug + * Added support for PCI. + * * See file CREDITS for list of people who contributed to this * project. * @@ -39,6 +43,9 @@ #include #include #include +#ifdef CONFIG_PCI +#include +#endif /* * I/O Port configuration table @@ -247,10 +254,23 @@ void reset_phy (void) #endif /* CONFIG_MII */ } +#ifdef CONFIG_PCI +typedef struct pci_ic_s { + unsigned long pci_int_stat; + unsigned long pci_int_mask; +}pci_ic_t; +#endif + int board_early_init_f (void) { vu_long *bcsr = (vu_long *)CFG_BCSR; +#ifdef CONFIG_PCI + volatile pci_ic_t* pci_ic = (pci_ic_t *) CFG_PCI_INT; + + /* mask alll the PCI interrupts */ + pci_ic->pci_int_mask |= 0xfff00000; +#endif #if (CONFIG_CONS_INDEX == 1) || (CONFIG_KGDB_INDEX == 1) bcsr[1] &= ~RS232EN_1; #endif @@ -506,3 +526,14 @@ int checkboard (void) #endif return 0; } + +#ifdef CONFIG_PCI +struct pci_controller hose; + +extern void pci_mpc8250_init(struct pci_controller *); + +void pci_init_board(void) +{ + pci_mpc8250_init(&hose); +} +#endif diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c index f068e8e50d..cb0c79bf20 100644 --- a/cpu/mpc8260/pci.c +++ b/cpu/mpc8260/pci.c @@ -2,6 +2,10 @@ * (C) Copyright 2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * + * Copyright (c) 2005 MontaVista Software, Inc. + * Vitaly Bordug + * Added support for PCI bridge on MPC8272ADS + * * See file CREDITS for list of people who contributed to this * project. * @@ -230,7 +234,7 @@ static inline void pci_outl (u32 addr, u32 data) void pci_mpc8250_init (struct pci_controller *hose) { -#ifdef CONFIG_MPC8266ADS +#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 DECLARE_GLOBAL_DATA_PTR; #endif u16 tempShort; @@ -248,6 +252,27 @@ void pci_mpc8250_init (struct pci_controller *hose) immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11) | SIUMCR_LBPC01; +#elif defined CONFIG_MPC8272 + immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & + ~SIUMCR_BBD & + ~SIUMCR_ESE & + ~SIUMCR_PBSE & + ~SIUMCR_CDIS & + ~SIUMCR_DPPC11 & + ~SIUMCR_L2CPC11 & + ~SIUMCR_LBPC11 & + ~SIUMCR_APPC11 & + ~SIUMCR_CS10PC11 & + ~SIUMCR_BCTLC11 & + ~SIUMCR_MMR11) + | SIUMCR_DPPC11 + | SIUMCR_L2CPC01 + | SIUMCR_LBPC00 + | SIUMCR_APPC10 + | SIUMCR_CS10PC00 + | SIUMCR_BCTLC00 + | SIUMCR_MMR11; + #else /* * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), @@ -290,7 +315,7 @@ void pci_mpc8250_init (struct pci_controller *hose) immap->im_memctl.memc_pcimsk0 = PCIMSK0_MASK; immap->im_memctl.memc_pcibr0 = PCI_MSTR0_LOCAL | PCIBR_ENABLE; -#ifdef CONFIG_MPC8266ADS +#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 immap->im_memctl.memc_pcimsk1 = PCIMSK1_MASK; immap->im_memctl.memc_pcibr1 = PCI_MSTR1_LOCAL | PCIBR_ENABLE; #endif @@ -300,7 +325,7 @@ void pci_mpc8250_init (struct pci_controller *hose) /* give it some time */ { -#ifdef CONFIG_MPC8266ADS +#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 /* Give the PCI cards more time to initialize before query This might be good for other boards also */ @@ -344,7 +369,11 @@ void pci_mpc8250_init (struct pci_controller *hose) immap->im_pci.pci_picmr0 = cpu_to_le32 (PICMR0_MASK_ATTRIB); /* Size & attribute */ /* See above for description - puts PCI request as highest priority */ +#ifdef CONFIG_MPC8272 + immap->im_siu_conf.sc_ppc_alrh = 0x01236745; +#else immap->im_siu_conf.sc_ppc_alrh = 0x03124567; +#endif /* Park the bus on the PCI */ immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; @@ -370,7 +399,7 @@ void pci_mpc8250_init (struct pci_controller *hose) hose->last_busno = 0xff; /* System memory space */ -#ifdef CONFIG_MPC8266ADS +#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 pci_set_region (hose->regions + 0, PCI_SLV_MEM_BUS, PCI_SLV_MEM_LOCAL, @@ -383,7 +412,7 @@ void pci_mpc8250_init (struct pci_controller *hose) #endif /* PCI memory space */ -#ifdef CONFIG_MPC8266ADS +#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 pci_set_region (hose->regions + 1, PCI_MSTR_MEMIO_BUS, PCI_MSTR_MEMIO_LOCAL, diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 98a063ae92..61a1c271ab 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -13,6 +13,10 @@ * Ported to PQ2FADS-ZU and PQ2FADS-VR boards. * Ported to MPC8272ADS board. * + * Copyright (c) 2005 MontaVista Software, Inc. + * Vitaly Bordug + * Added support for PCI bridge on MPC8272ADS + * * See file CREDITS for list of people who contributed to this * project. * @@ -173,6 +177,15 @@ #endif #endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */ +/*PCI*/ +#ifdef CONFIG_MPC8272 +#define CONFIG_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_BOOTDELAY 0 +#define CONFIG_PCI_SCAN_SHOW +#endif + + #ifndef CONFIG_SDRAM_PBI #define CONFIG_SDRAM_PBI 0 /* By default, use bank-based interleaving */ #endif @@ -205,7 +218,6 @@ CFG_CMD_KGDB | \ CFG_CMD_MMC | \ CFG_CMD_NAND | \ - CFG_CMD_PCI | \ CFG_CMD_PCMCIA | \ CFG_CMD_REISER | \ CFG_CMD_SCSI | \ @@ -216,14 +228,21 @@ CFG_CMD_VFD | \ CFG_CMD_XIMG -#if CONFIG_ADSTYPE >= CFG_PQ2FADS +#if CONFIG_ADSTYPE == CFG_8272ADS +#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ + CFG_CMD_SDRAM | \ + CFG_CMD_I2C | \ + CFG_EXCLUDE ) ) +#elif CONFIG_ADSTYPE >= CFG_PQ2FADS #define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ CFG_CMD_SDRAM | \ CFG_CMD_I2C | \ + CFG_CMD_PCI | \ CFG_EXCLUDE ) ) #else #define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_EXCLUDE ) ) + CMD_CFG_PCI | \ + CFG_EXCLUDE ) ) #endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ @@ -295,6 +314,9 @@ #define CFG_IMMR 0xF0000000 #define CFG_BCSR 0xF4500000 +#if CONFIG_ADSTYPE == CFG_8272ADS +#define CFG_PCI_INT 0xF8200000 +#endif #define CFG_SDRAM_BASE 0x00000000 #define CFG_LSDRAM_BASE 0xFD000000 @@ -385,6 +407,13 @@ #define CFG_BR1_PRELIM CFG_BCSR | 0x00001801 #define CFG_OR1_PRELIM 0xFFFF8010 +/*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/ + +#if CONFIG_ADSTYPE == CFG_8272ADS +#define CFG_BR3_PRELIM (CFG_PCI_INT | 0x1801) /* PCI interrupt controller */ +#define CFG_OR3_PRELIM 0xFFFF8010 +#endif + #define CFG_RMR RMR_CSRE #define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) #define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) @@ -417,4 +446,67 @@ #define CFG_RESET_ADDRESS 0x04400000 +#if CONFIG_ADSTYPE == CFG_8272ADS + +/* PCI Memory map (if different from default map */ +#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */ +#define CFG_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +#define CFG_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \ + PICMR_PREFETCH_EN) + +/* + * These are the windows that allow the CPU to access PCI address space. + * All three PCI master windows, which allow the CPU to access PCI + * prefetch, non prefetch, and IO space (see below), must all fit within + * these windows. + */ + + + +/* + * Master window that allows the CPU to access PCI Memory (prefetch). + * This window will be setup with the second set of Outbound ATU registers + * in the bridge. + */ + +#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ +#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ +#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL +#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ +#define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN) + +/* + * Master window that allows the CPU to access PCI Memory (non-prefetch). + * This window will be setup with the second set of Outbound ATU registers + * in the bridge. + */ + +#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ +#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ +#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL +#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ +#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) + +/* + * Master window that allows the CPU to access PCI IO space. + * This window will be setup with the first set of Outbound ATU registers + * in the bridge. + */ + +#define CFG_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */ +#define CFG_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ +#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL +#define CFG_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */ +#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO) + + +/* PCIBR0 - for PCI IO*/ +#define CFG_PCI_MSTR0_LOCAL CFG_PCI_MSTR_IO_LOCAL /* Local base */ +#define CFG_PCIMSK0_MASK ~(CFG_PCI_MSTR_IO_SIZE - 1U) /* Size of window */ +/* PCIBR1 - prefetch and non-prefetch regions joined together */ +#define CFG_PCI_MSTR1_LOCAL CFG_PCI_MSTR_MEM_LOCAL +#define CFG_PCIMSK1_MASK ~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U) + +#endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/ + #endif /* __CONFIG_H */ -- 2.30.2