From 18422bb3c1d89b510bb7c590c716dd6ad8e1a1e4 Mon Sep 17 00:00:00 2001 From: Hartmut Knaack Date: Wed, 29 Jul 2015 23:39:36 +0200 Subject: [PATCH] iio:accel:stk8312: improve error handling Improve error handling in the following ways: - set return value on error condition to an appropriate error code - return error code immediately in case of an error (slightly changes code structure) - pass up real error code - add missing error handling - return 0 when error have been caught already - put device back in active mode after error occurs Signed-off-by: Hartmut Knaack Signed-off-by: Jonathan Cameron --- drivers/iio/accel/stk8312.c | 60 +++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 22 deletions(-) diff --git a/drivers/iio/accel/stk8312.c b/drivers/iio/accel/stk8312.c index 8280a37e0068..82ad283b8c60 100644 --- a/drivers/iio/accel/stk8312.c +++ b/drivers/iio/accel/stk8312.c @@ -146,8 +146,10 @@ static int stk8312_otp_init(struct stk8312_data *data) count--; } while (!(ret & 0x80) && count > 0); - if (count == 0) + if (count == 0) { + ret = -ETIMEDOUT; goto exit_err; + } ret = i2c_smbus_read_byte_data(client, STK8312_REG_OTPDATA); if (ret == 0) @@ -161,7 +163,7 @@ static int stk8312_otp_init(struct stk8312_data *data) goto exit_err; msleep(150); - return ret; + return 0; exit_err: dev_err(&client->dev, "failed to initialize sensor\n"); @@ -205,8 +207,11 @@ static int stk8312_set_interrupts(struct stk8312_data *data, u8 int_mask) return ret; ret = i2c_smbus_write_byte_data(client, STK8312_REG_INTSU, int_mask); - if (ret < 0) + if (ret < 0) { dev_err(&client->dev, "failed to set interrupts\n"); + stk8312_set_mode(data, mode); + return ret; + } return stk8312_set_mode(data, mode); } @@ -230,7 +235,7 @@ static int stk8312_data_rdy_trigger_set_state(struct iio_trigger *trig, data->dready_trigger_on = state; - return ret; + return 0; } static const struct iio_trigger_ops stk8312_trigger_ops = { @@ -255,20 +260,24 @@ static int stk8312_set_sample_rate(struct stk8312_data *data, int rate) return ret; ret = i2c_smbus_read_byte_data(client, STK8312_REG_SR); - if (ret < 0) { - dev_err(&client->dev, "failed to set sampling rate\n"); - return ret; - } + if (ret < 0) + goto err_activate; masked_reg = (ret & (~STK8312_SR_MASK)) | rate; ret = i2c_smbus_write_byte_data(client, STK8312_REG_SR, masked_reg); if (ret < 0) - dev_err(&client->dev, "failed to set sampling rate\n"); - else - data->sample_rate_idx = rate; + goto err_activate; + + data->sample_rate_idx = rate; return stk8312_set_mode(data, mode); + +err_activate: + dev_err(&client->dev, "failed to set sampling rate\n"); + stk8312_set_mode(data, mode); + + return ret; } static int stk8312_set_range(struct stk8312_data *data, u8 range) @@ -290,21 +299,25 @@ static int stk8312_set_range(struct stk8312_data *data, u8 range) return ret; ret = i2c_smbus_read_byte_data(client, STK8312_REG_STH); - if (ret < 0) { - dev_err(&client->dev, "failed to change sensor range\n"); - return ret; - } + if (ret < 0) + goto err_activate; masked_reg = ret & (~STK8312_RNG_MASK); masked_reg |= range << STK8312_RNG_SHIFT; ret = i2c_smbus_write_byte_data(client, STK8312_REG_STH, masked_reg); if (ret < 0) - dev_err(&client->dev, "failed to change sensor range\n"); - else - data->range = range; + goto err_activate; + + data->range = range; return stk8312_set_mode(data, mode); + +err_activate: + dev_err(&client->dev, "failed to change sensor range\n"); + stk8312_set_mode(data, mode); + + return ret; } static int stk8312_read_accel(struct stk8312_data *data, u8 address) @@ -337,18 +350,21 @@ static int stk8312_read_raw(struct iio_dev *indio_dev, ret = stk8312_set_mode(data, data->mode | STK8312_MODE_ACTIVE); if (ret < 0) { mutex_unlock(&data->lock); - return -EINVAL; + return ret; } ret = stk8312_read_accel(data, chan->address); if (ret < 0) { stk8312_set_mode(data, data->mode & (~STK8312_MODE_ACTIVE)); mutex_unlock(&data->lock); - return -EINVAL; + return ret; } *val = sign_extend32(ret, 7); - stk8312_set_mode(data, data->mode & (~STK8312_MODE_ACTIVE)); + ret = stk8312_set_mode(data, + data->mode & (~STK8312_MODE_ACTIVE)); mutex_unlock(&data->lock); + if (ret < 0) + return ret; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: *val = stk8312_scale_table[data->range - 1][0]; @@ -608,7 +624,7 @@ static int stk8312_probe(struct i2c_client *client, goto err_buffer_cleanup; } - return ret; + return 0; err_buffer_cleanup: iio_triggered_buffer_cleanup(indio_dev); -- 2.30.2