From 182088aa3c6c7f7c20a2c1dcc9ded4a3fc631f38 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 20 Dec 2017 23:21:28 +0000 Subject: [PATCH] phylink: ensure the PHY interface mode is appropriately set When setting the ethtool settings, ensure that the validated PHY interface mode is propagated to the current link settings, so that 2500BaseX can be selected. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phylink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 5dc9668dde34..8d06a083ac4c 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -951,6 +951,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl, mutex_lock(&pl->state_mutex); /* Configure the MAC to match the new settings */ linkmode_copy(pl->link_config.advertising, our_kset.link_modes.advertising); + pl->link_config.interface = config.interface; pl->link_config.speed = our_kset.base.speed; pl->link_config.duplex = our_kset.base.duplex; pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE; -- 2.30.2