From 16d6a63f857a4e9eeb1f173e964264d8a06e65eb Mon Sep 17 00:00:00 2001 From: Ademar Arvati Filho Date: Wed, 4 Jul 2018 01:29:36 +0000 Subject: [PATCH] ramips: add support for Blueendless Kimax U35WF Blueendless Kimax U35WF is a 3,5" HDD Enclosure with Wi-Fi and Ethernet Patch rewritten from: https://forum.openwrt.org/viewtopic.php?id=66908 Based on: https://github.com/lede-project/source/pull/965 Specification: - SoC: MediaTek MT7620N - CPU/Speed: 580 MHz - Flash-Chip: KH25L12835F Spi Flash - Flash size: 16 MiB - RAM: 64 MiB - LAN: 1x 100 Mbps Ethernet - WiFi SoC-integrated: 802.11bgn - 1x USB 2.0 - UART: for serial console Installation: 1. Download sysupgrade.bin 2. Open vendor web interface 3. Choose to upgrade firmware 3. After reboot connect via ethernet at 192.168.1.1 Signed-off-by: Ademar Arvati Filho --- .../ramips/base-files/etc/board.d/01_leds | 4 + .../ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/etc/diag.sh | 7 +- .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/U35WF.dts | 106 ++++++++++++++++++ target/linux/ramips/image/mt7620.mk | 7 ++ 6 files changed, 123 insertions(+), 3 deletions(-) create mode 100644 target/linux/ramips/dts/U35WF.dts diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index f89b4ea3337..6dec7a10a1a 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -245,6 +245,10 @@ ht-tm02) ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0" set_wifi_led "$boardname:blue:wlan" ;; +kimax,u35wf) + set_wifi_led "$boardname:blue:wifi" + ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0" + ;; kn|\ nbg-419n2) set_usb_led "$boardname:green:usb" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index f1fa94ec779..818a919f419 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -49,6 +49,7 @@ ramips_setup_interfaces() dcs-930|\ dcs-930l-b1|\ ht-tm02|\ + kimax,u35wf|\ linkits7688 | \ m2m|\ microwrt|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 17566ad1fdb..1e67097cd8f 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -199,12 +199,13 @@ get_status_led() { hc5962) status_led="$boardname:white:status" ;; - linkits7688) - status_led="linkit-smart-7688:orange:wifi" - ;; + kimax,u35wf|\ m2m) status_led="$boardname:blue:wifi" ;; + linkits7688) + status_led="linkit-smart-7688:orange:wifi" + ;; gl-mt300n-v2) status_led="$boardname:green:power" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 1dd84447935..a7f9c1722eb 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -83,6 +83,7 @@ platform_check_image() { jhr-n825r|\ jhr-n926r|\ k2p|\ + kimax,u35wf|\ kn|\ kn_rc|\ kn_rf|\ diff --git a/target/linux/ramips/dts/U35WF.dts b/target/linux/ramips/dts/U35WF.dts new file mode 100644 index 00000000000..33d9112c61d --- /dev/null +++ b/target/linux/ramips/dts/U35WF.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "kimax,u35wf","ralink,mt7620n-soc"; + model = "Kimax U35WF"; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wifi { + label = "u35wf:blue:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "u35wf:green:eth"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "ephy", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 736741a4ba2..c968825754e 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -280,6 +280,13 @@ define Device/hc5861 endef TARGET_DEVICES += hc5861 +define Device/kimax_u35wf + DTS := U35WF + IMAGE_SIZE := 16064k + DEVICE_TITLE := Kimax U35WF +endef +TARGET_DEVICES += kimax_u35wf + define Device/kng_rc DTS := kng_rc IMAGE_SIZE := $(ralink_default_fw_size_16M) -- 2.30.2