From 162350eb75fcb81ec0ea34f042f1deddb759aea8 Mon Sep 17 00:00:00 2001 From: Matthew Fleming Date: Thu, 2 Oct 2008 12:21:42 +0100 Subject: [PATCH] MMC: Use timeout values from CSR Hard-coded timeout values of 250ms for writes and 100ms for reads are currently used for MMC transactions over SPI. The spec states that the timeout values from the card should be used. Signed-off-by: Matthew Fleming Signed-off-by: Pierre Ossman --- drivers/mmc/host/mmc_spi.c | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 7503b81374e0..07faf5412a1f 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -95,8 +95,6 @@ * reads which takes nowhere near that long. Older cards may be able to use * shorter timeouts ... but why bother? */ -#define readblock_timeout ktime_set(0, 100 * 1000 * 1000) -#define writeblock_timeout ktime_set(0, 250 * 1000 * 1000) #define r1b_timeout ktime_set(3, 0) @@ -220,9 +218,9 @@ mmc_spi_wait_unbusy(struct mmc_spi_host *host, ktime_t timeout) return mmc_spi_skip(host, timeout, sizeof(host->data->status), 0); } -static int mmc_spi_readtoken(struct mmc_spi_host *host) +static int mmc_spi_readtoken(struct mmc_spi_host *host, ktime_t timeout) { - return mmc_spi_skip(host, readblock_timeout, 1, 0xff); + return mmc_spi_skip(host, timeout, 1, 0xff); } @@ -605,7 +603,8 @@ mmc_spi_setup_data_message( * Return negative errno, else success. */ static int -mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t) +mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t, + ktime_t timeout) { struct spi_device *spi = host->spi; int status, i; @@ -673,7 +672,7 @@ mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t) if (scratch->status[i] != 0) return 0; } - return mmc_spi_wait_unbusy(host, writeblock_timeout); + return mmc_spi_wait_unbusy(host, timeout); } /* @@ -693,7 +692,8 @@ mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t) * STOP_TRANSMISSION command. */ static int -mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t) +mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t, + ktime_t timeout) { struct spi_device *spi = host->spi; int status; @@ -707,7 +707,7 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t) return status; status = scratch->status[0]; if (status == 0xff || status == 0) - status = mmc_spi_readtoken(host); + status = mmc_spi_readtoken(host, timeout); if (status == SPI_TOKEN_SINGLE) { if (host->dma_dev) { @@ -778,6 +778,8 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, struct scatterlist *sg; unsigned n_sg; int multiple = (data->blocks > 1); + u32 clock_rate; + ktime_t timeout; if (data->flags & MMC_DATA_READ) direction = DMA_FROM_DEVICE; @@ -786,6 +788,14 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, mmc_spi_setup_data_message(host, multiple, direction); t = &host->t; + if (t->speed_hz) + clock_rate = t->speed_hz; + else + clock_rate = spi->max_speed_hz; + + timeout = ktime_add_ns(ktime_set(0, 0), data->timeout_ns + + data->timeout_clks * 1000000 / clock_rate); + /* Handle scatterlist segments one at a time, with synch for * each 512-byte block */ @@ -832,9 +842,9 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, t->len); if (direction == DMA_TO_DEVICE) - status = mmc_spi_writeblock(host, t); + status = mmc_spi_writeblock(host, t, timeout); else - status = mmc_spi_readblock(host, t); + status = mmc_spi_readblock(host, t, timeout); if (status < 0) break; @@ -917,7 +927,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, if (scratch->status[tmp] != 0) return; } - tmp = mmc_spi_wait_unbusy(host, writeblock_timeout); + tmp = mmc_spi_wait_unbusy(host, timeout); if (tmp < 0 && !data->error) data->error = tmp; } -- 2.30.2