From 14285c1f97c3bb137a12fb9e3a4e65e1a3a51a0d Mon Sep 17 00:00:00 2001 From: =?utf8?q?Rapha=C3=ABl=20Beamonte?= Date: Tue, 18 Aug 2015 12:58:08 -0400 Subject: [PATCH] staging: rtl8192u: r8192U_core: clean C99 // comments MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Replace C99 // comments by /* comments */ to follow the kernel code style. Remove some unuseful comments. Signed-off-by: Raphaël Beamonte Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192u/r8192U_core.c | 636 ++++++++++++------------- 1 file changed, 316 insertions(+), 320 deletions(-) diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index e0832d1a5493..9a658b4e0ce0 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -64,7 +64,7 @@ double __extendsfdf2(float a) #include "r8190_rtl8256.h" /* RTL8225 Radio frontend */ #include "r8180_93cx6.h" /* Card EEPROM */ #include "r8192U_wx.h" -#include "r819xU_phy.h" //added by WB 4.30.2008 +#include "r819xU_phy.h" #include "r819xU_phyreg.h" #include "r819xU_cmdpkt.h" #include "r8192U_dm.h" @@ -72,13 +72,13 @@ double __extendsfdf2(float a) #include #include #include -// FIXME: check if 2.6.7 is ok +/* FIXME: check if 2.6.7 is ok */ #include "dot11d.h" -//set here to open your trace code. //WB +/* set here to open your trace code. */ u32 rt_global_debug_component = COMP_DOWN | COMP_SEC | - COMP_ERR; //always open err flags on + COMP_ERR; /* always open err flags on */ #define TOTAL_CAM_ENTRY 32 #define CAM_CONTENT_COUNT 8 @@ -109,7 +109,7 @@ MODULE_DEVICE_TABLE(usb, rtl8192_usb_id_tbl); MODULE_DESCRIPTION("Linux driver for Realtek RTL8192 USB WiFi cards"); static char *ifname = "wlan%d"; -static int hwwep = 1; //default use hw. set 0 to use software security +static int hwwep = 1; /* default use hw. set 0 to use software security */ static int channels = 0x3fff; @@ -143,17 +143,17 @@ struct CHANNEL_LIST { }; static struct CHANNEL_LIST ChannelPlan[] = { - {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165}, 24}, //FCC - {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, 11}, //IC - {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64}, 21}, //ETSI - {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}, //Spain. Change to ETSI. - {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}, //France. Change to ETSI. - {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22}, //MKK //MKK - {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22},//MKK1 - {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}, //Israel. - {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22}, // For 11a , TELEC - {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22}, //MIC - {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}, 14} //For Global Domain. 1-11:active scan, 12-14 passive scan. //+YJ, 080626 + {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165}, 24}, /* FCC */ + {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, 11}, /* IC */ + {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64}, 21}, /* ETSI */ + {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}, /* Spain. Change to ETSI. */ + {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}, /* France. Change to ETSI. */ + {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22}, /* MKK */ + {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22}, /* MKK1 */ + {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}, /* Israel. */ + {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22}, /* For 11a , TELEC */ + {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22}, /* MIC */ + {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}, 14} /* For Global Domain. 1-11:active scan, 12-14 passive scan. */ }; static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv *priv) @@ -173,7 +173,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv *priv) case COUNTRY_CODE_MIC: Dot11d_Init(ieee); ieee->bGlobalDomain = false; - //actually 8225 & 8256 rf chips only support B,G,24N mode + /* actually 8225 & 8256 rf chips only support B,G,24N mode */ if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256)) { min_chan = 1; max_chan = 14; @@ -181,9 +181,9 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv *priv) RT_TRACE(COMP_ERR, "unknown rf chip, can't set channel map in function:%s()\n", __func__); } if (ChannelPlan[channel_plan].Len != 0) { - // Clear old channel map + /* Clear old channel map */ memset(GET_DOT11D_INFO(ieee)->channel_map, 0, sizeof(GET_DOT11D_INFO(ieee)->channel_map)); - // Set new channel map + /* Set new channel map */ for (i = 0; i < ChannelPlan[channel_plan].Len; i++) { if (ChannelPlan[channel_plan].Channel[i] < min_chan || ChannelPlan[channel_plan].Channel[i] > max_chan) break; @@ -193,7 +193,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv *priv) break; case COUNTRY_CODE_GLOBAL_DOMAIN: - GET_DOT11D_INFO(ieee)->bEnabled = 0;//this flag enabled to follow 11d country IE setting, otherwise, it shall follow global domain settings. + GET_DOT11D_INFO(ieee)->bEnabled = 0; /* this flag enabled to follow 11d country IE setting, otherwise, it shall follow global domain settings. */ Dot11d_Reset(ieee); ieee->bGlobalDomain = true; break; @@ -209,9 +209,10 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv *priv) static void CamResetAllEntry(struct net_device *dev) { u32 ulcommand = 0; - //2004/02/11 In static WEP, OID_ADD_KEY or OID_ADD_WEP are set before STA associate to AP. - // However, ResetKey is called on OID_802_11_INFRASTRUCTURE_MODE and MlmeAssociateRequest - // In this condition, Cam can not be reset because upper layer will not set this static key again. + /* 2004/02/11 In static WEP, OID_ADD_KEY or OID_ADD_WEP are set before STA associate to AP. + * However, ResetKey is called on OID_802_11_INFRASTRUCTURE_MODE and MlmeAssociateRequest + * In this condition, Cam can not be reset because upper layer will not set this static key again. + */ ulcommand |= BIT31 | BIT30; write_nic_dword(dev, RWCAM, ulcommand); @@ -264,7 +265,7 @@ int read_nic_byte_E(struct net_device *dev, int indx, u8 *data) return 0; } -//as 92U has extend page from 4 to 16, so modify functions below. +/* as 92U has extend page from 4 to 16, so modify functions below. */ void write_nic_byte(struct net_device *dev, int indx, u8 data) { int status; @@ -678,7 +679,7 @@ void rtl8192_set_chan(struct net_device *dev, short ch) /* this hack should avoid frame TX during channel setting*/ - //need to implement rf set channel here WB + /* need to implement rf set channel here */ if (priv->rf_set_chan) priv->rf_set_chan(dev, priv->chan); @@ -717,7 +718,7 @@ static int rtl8192_rx_initiate(struct net_device *dev) info = (struct rtl8192_rx_info *)skb->cb; info->urb = entry; info->dev = dev; - info->out_pipe = 3; //denote rx normal packet queue + info->out_pipe = 3; /* denote rx normal packet queue */ skb_queue_tail(&priv->rx_queue, skb); usb_submit_urb(entry, GFP_KERNEL); } @@ -738,7 +739,7 @@ static int rtl8192_rx_initiate(struct net_device *dev) info = (struct rtl8192_rx_info *)skb->cb; info->urb = entry; info->dev = dev; - info->out_pipe = 9; //denote rx cmd packet queue + info->out_pipe = 9; /* denote rx cmd packet queue */ skb_queue_tail(&priv->rx_queue, skb); usb_submit_urb(entry, GFP_KERNEL); } @@ -788,7 +789,7 @@ void rtl8192_set_rxconf(struct net_device *dev) write_nic_dword(dev, RCR, rxconf); } -//wait to be removed +/* wait to be removed */ void rtl8192_rx_enable(struct net_device *dev) { rtl8192_rx_initiate(dev); @@ -933,13 +934,13 @@ static u32 rtl819xusb_rx_command_packet(struct net_device *dev, static void rtl8192_data_hard_stop(struct net_device *dev) { - //FIXME !! + /* FIXME !! */ } static void rtl8192_data_hard_resume(struct net_device *dev) { - // FIXME !! + /* FIXME !! */ } /* this function TX data frames when the ieee80211 stack requires this. @@ -1031,16 +1032,16 @@ static void rtl8192_tx_isr(struct urb *tx_urb) atomic_dec(&priv->tx_pending[queue_index]); } - // - // Handle HW Beacon: - // We had transfer our beacon frame to host controller at this moment. - // - // - // Caution: - // Handling the wait queue of command packets. - // For Tx command packets, we must not do TCB fragment because it is not handled right now. - // We must cut the packets to match the size of TX_CMD_PKT before we send it. - // + /* + * Handle HW Beacon: + * We had transfer our beacon frame to host controller at this moment. + * + * + * Caution: + * Handling the wait queue of command packets. + * For Tx command packets, we must not do TCB fragment because it is not handled right now. + * We must cut the packets to match the size of TX_CMD_PKT before we send it. + */ /* Handle MPDU in wait queue. */ if (queue_index != BEACON_QUEUE) { @@ -1051,7 +1052,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb) if (skb) priv->ieee80211->softmac_hard_start_xmit(skb, dev); - return; //modified by david to avoid further processing AMSDU + return; /* avoid further processing AMSDU */ } } @@ -1167,7 +1168,7 @@ static void rtl8192_update_cap(struct net_device *dev, u16 cap) u8 slot_time = 0; if ((cap & WLAN_CAPABILITY_SHORT_SLOT) && (!priv->ieee80211->pHTInfo->bCurrentRT2RTLongSlotTime)) /* short slot time */ slot_time = SHORT_SLOT_TIME; - else //long slot time + else /* long slot time */ slot_time = NON_SHORT_SLOT_TIME; priv->slot_time = slot_time; write_nic_byte(dev, SLOT_TIME, slot_time); @@ -1197,7 +1198,7 @@ static void rtl8192_net_update(struct net_device *dev) write_nic_word(dev, BCN_DRV_EARLY_INT, 1); write_nic_byte(dev, BCN_ERR_THRESH, 100); BcnTimeCfg |= (BcnCW << BCN_TCFG_CW_SHIFT); - // TODO: BcnIFS may required to be changed on ASIC + /* TODO: BcnIFS may required to be changed on ASIC */ BcnTimeCfg |= BcnIFS << BCN_TCFG_IFS; write_nic_word(dev, BCN_TCFG, BcnTimeCfg); @@ -1207,8 +1208,9 @@ static void rtl8192_net_update(struct net_device *dev) } -//temporary hw beacon is not used any more. -//open it when necessary +/* temporary hw beacon is not used any more. + * open it when necessary + */ void rtl819xusb_beacon_tx(struct net_device *dev, u16 tx_rate) { @@ -1287,16 +1289,17 @@ short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb) memset(pdesc, 0, USB_HWDESC_HEADER_LEN); /* Tx descriptor ought to be set according to the skb->cb */ - pdesc->FirstSeg = 1;//bFirstSeg; - pdesc->LastSeg = 1;//bLastSeg; + pdesc->FirstSeg = 1; + pdesc->LastSeg = 1; pdesc->CmdInit = tcb_desc->bCmdOrInit; pdesc->TxBufferSize = tcb_desc->txbuf_size; pdesc->OWN = 1; pdesc->LINIP = tcb_desc->bLastIniPkt; - //---------------------------------------------------------------------------- - // Fill up USB_OUT_CONTEXT. - //---------------------------------------------------------------------------- + /*---------------------------------------------------------------------------- + * Fill up USB_OUT_CONTEXT. + *---------------------------------------------------------------------------- + */ idx_pipe = 0x04; usb_fill_bulk_urb(tx_urb, priv->udev, usb_sndbulkpipe(priv->udev, idx_pipe), skb->data, skb->len, rtl8192_tx_isr, skb); @@ -1320,7 +1323,7 @@ short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb) */ static u8 MapHwQueueToFirmwareQueue(u8 QueueID) { - u8 QueueSelect = 0x0; //defualt set to + u8 QueueSelect = 0x0; /* defualt set to */ switch (QueueID) { case BE_QUEUE: @@ -1346,8 +1349,8 @@ static u8 MapHwQueueToFirmwareQueue(u8 QueueID) QueueSelect = QSLT_BEACON; break; - // TODO: 2006.10.30 mark other queue selection until we verify it is OK - // TODO: Remove Assertions + /* TODO: 2006.10.30 mark other queue selection until we verify it is OK */ + /* TODO: Remove Assertions */ case TXCMD_QUEUE: QueueSelect = QSLT_CMD; break; @@ -1548,7 +1551,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb) if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40) { if (tcb_desc->bPacketBW) { tx_fwinfo->TxBandwidth = 1; - tx_fwinfo->TxSubCarrier = 0; //By SD3's Jerry suggestion, use duplicated mode + tx_fwinfo->TxSubCarrier = 0; /* use duplicated mode */ } else { tx_fwinfo->TxBandwidth = 0; tx_fwinfo->TxSubCarrier = priv->nCur40MhzPrimeSC; @@ -1600,7 +1603,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb) tx_desc->USERATE = tcb_desc->bTxUseDriverAssingedRate; /* Fill fields that are required to be initialized in all of the descriptors */ - //DWORD 0 + /* DWORD 0 */ tx_desc->FirstSeg = 1; tx_desc->LastSeg = 1; tx_desc->OWN = 1; @@ -1616,7 +1619,11 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb) status = usb_submit_urb(tx_urb, GFP_ATOMIC); if (!status) { - //we need to send 0 byte packet whenever 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has been transmitted. Otherwise, it will be halt to wait for another packet. WB. 2008.08.27 + /* We need to send 0 byte packet whenever + * 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has + * been transmitted. Otherwise, it will be halt to wait for + * another packet. + */ bool bSend0Byte = false; u8 zero = 0; if (udev->speed == USB_SPEED_HIGH) { @@ -1770,7 +1777,10 @@ static void rtl8192_link_change(struct net_device *dev) if (ieee->state == IEEE80211_LINKED) { rtl8192_net_update(dev); rtl8192_update_ratr_table(dev); - //add this as in pure N mode, wep encryption will use software way, but there is no chance to set this as wep will not set group key in wext. WB.2008.07.08 + /* Add this as in pure N mode, wep encryption will use software + * way, but there is no chance to set this as wep will not set + * group key in wext. + */ if ((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type)) EnableHWSecurityConfig8192(dev); } @@ -1832,7 +1842,7 @@ static void rtl8192_qos_activate(struct work_struct *work) /* For we just support b/g mode at present, let the slot time at 9/20 selection */ /* update the ac parameter to related registers */ for (i = 0; i < QOS_QUEUE_NUM; i++) { - //Mode G/A: slotTimeTimer = 9; Mode B: 20 + /* Mode G/A: slotTimeTimer = 9; Mode B: 20 */ u1bAIFS = qos_parameters->aifs[i] * ((mode & (IEEE_G | IEEE_N_24G)) ? 9 : 20) + aSifsTime; u1bAIFS <<= AC_PARAM_AIFS_OFFSET; op_limit = (u32)le16_to_cpu(qos_parameters->tx_op_limit[i]); @@ -2021,7 +2031,9 @@ static bool GetNmodeSupportBySecCfg8192(struct net_device *dev) int encrypt; crypt = ieee->crypt[ieee->tx_keyidx]; - //we use connecting AP's capability instead of only security config on our driver to distinguish whether it should use N mode or G mode + /* we use connecting AP's capability instead of only security config + * on our driver to distinguish whether it should use N mode or G mode + */ encrypt = (network->capability & WLAN_CAPABILITY_PRIVACY) || (ieee->host_encrypt && crypt && crypt->ops && (0 == strcmp(crypt->ops->name, "WEP"))); /* simply judge */ @@ -2051,7 +2063,9 @@ static bool GetHalfNmodeSupportByAPs819xUsb(struct net_device *dev) static void rtl8192_refresh_supportrate(struct r8192_priv *priv) { struct ieee80211_device *ieee = priv->ieee80211; - //we do not consider set support rate for ABG mode, only HT MCS rate is set here. + /* We do not consider set support rate for ABG mode, only + * HT MCS rate is set here. + */ if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G) memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16); else @@ -2098,7 +2112,7 @@ static void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode) wireless_mode = WIRELESS_MODE_B; } } -#ifdef TO_DO_LIST //// TODO: this function doesn't work well at this time, we should wait for FPGA +#ifdef TO_DO_LIST /* TODO: this function doesn't work well at this time, we should wait for FPGA */ ActUpdateChannelAccessSetting(pAdapter, pHalData->CurrentWirelessMode, &pAdapter->MgntInfo.Info8185.ChannelAccessSetting); #endif priv->ieee80211->mode = wireless_mode; @@ -2111,43 +2125,43 @@ static void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode) rtl8192_refresh_supportrate(priv); } -//init priv variables here. only non_zero value should be initialized here. +/* init priv variables here. only non_zero value should be initialized here. */ static void rtl8192_init_priv_variable(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); u8 i; priv->card_8192 = NIC_8192U; - priv->chan = 1; //set to channel 1 - priv->ieee80211->mode = WIRELESS_MODE_AUTO; //SET AUTO + priv->chan = 1; /* set to channel 1 */ + priv->ieee80211->mode = WIRELESS_MODE_AUTO; /* SET AUTO */ priv->ieee80211->iw_mode = IW_MODE_INFRA; priv->ieee80211->ieee_up = 0; priv->retry_rts = DEFAULT_RETRY_RTS; priv->retry_data = DEFAULT_RETRY_DATA; priv->ieee80211->rts = DEFAULT_RTS_THRESHOLD; - priv->ieee80211->rate = 110; //11 mbps + priv->ieee80211->rate = 110; /* 11 mbps */ priv->ieee80211->short_slot = 1; priv->promisc = (dev->flags & IFF_PROMISC) ? 1 : 0; priv->CckPwEnl = 6; - //for silent reset + /* for silent reset */ priv->IrpPendingCount = 1; priv->ResetProgress = RESET_TYPE_NORESET; priv->bForcedSilentReset = false; priv->bDisableNormalResetCheck = false; priv->force_reset = false; - priv->ieee80211->FwRWRF = 0; //we don't use FW read/write RF until stable firmware is available. + priv->ieee80211->FwRWRF = 0; /* we don't use FW read/write RF until stable firmware is available. */ priv->ieee80211->current_network.beacon_interval = DEFAULT_BEACONINTERVAL; priv->ieee80211->softmac_features = IEEE_SOFTMAC_SCAN | IEEE_SOFTMAC_ASSOCIATE | IEEE_SOFTMAC_PROBERQ | IEEE_SOFTMAC_PROBERS | IEEE_SOFTMAC_TX_QUEUE | - IEEE_SOFTMAC_BEACONS;//added by amy 080604 + IEEE_SOFTMAC_BEACONS; priv->ieee80211->active_scan = 1; priv->ieee80211->modulation = IEEE80211_CCK_MODULATION | IEEE80211_OFDM_MODULATION; priv->ieee80211->host_encrypt = 1; priv->ieee80211->host_decrypt = 1; - priv->ieee80211->start_send_beacons = NULL; //-by amy 080604 - priv->ieee80211->stop_send_beacons = NULL; //-by amy 080604 + priv->ieee80211->start_send_beacons = NULL; + priv->ieee80211->stop_send_beacons = NULL; priv->ieee80211->softmac_hard_start_xmit = rtl8192_hard_start_xmit; priv->ieee80211->set_chan = rtl8192_set_chan; priv->ieee80211->link_change = rtl8192_link_change; @@ -2160,15 +2174,14 @@ static void rtl8192_init_priv_variable(struct net_device *dev) priv->ieee80211->tx_headroom = TX_PACKET_SHIFT_BYTES; priv->ieee80211->qos_support = 1; - //added by WB priv->ieee80211->SetBWModeHandler = rtl8192_SetBWMode; priv->ieee80211->handle_assoc_response = rtl8192_handle_assoc_response; priv->ieee80211->handle_beacon = rtl8192_handle_beacon; - //added by david + priv->ieee80211->GetNmodeSupportBySecCfg = GetNmodeSupportBySecCfg8192; priv->ieee80211->GetHalfNmodeSupportByAPsHandler = GetHalfNmodeSupportByAPs819xUsb; priv->ieee80211->SetWirelessMode = rtl8192_SetWirelessMode; - //added by amy + priv->ieee80211->InitialGainHandler = InitialGain819xUsb; priv->card_type = USB; #ifdef TO_DO_LIST @@ -2182,30 +2195,29 @@ static void rtl8192_init_priv_variable(struct net_device *dev) priv->EarlyRxThreshold = 7; priv->enable_gpio0 = 0; priv->TransmitConfig = - (TCR_MXDMA_2048 << TCR_MXDMA_OFFSET) | // Max DMA Burst Size per Tx DMA Burst, 7: reserved. - (priv->ShortRetryLimit << TCR_SRL_OFFSET) | // Short retry limit - (priv->LongRetryLimit << TCR_LRL_OFFSET) | // Long retry limit - (false ? TCR_SAT : 0); // FALSE: HW provides PLCP length and LENGEXT, TRUE: SW provides them + (TCR_MXDMA_2048 << TCR_MXDMA_OFFSET) | /* Max DMA Burst Size per Tx DMA Burst, 7: reserved. */ + (priv->ShortRetryLimit << TCR_SRL_OFFSET) | /* Short retry limit */ + (priv->LongRetryLimit << TCR_LRL_OFFSET) | /* Long retry limit */ + (false ? TCR_SAT : 0); /* FALSE: HW provides PLCP length and LENGEXT, TRUE: SW provides them */ #ifdef TO_DO_LIST if (Adapter->bInHctTest) pHalData->ReceiveConfig = pHalData->CSMethod | - RCR_AMF | RCR_ADF | //accept management/data - //guangan200710 - RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko. - RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC - RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet - ((u32)7 << RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Tx DMA Burst, 7: unlimited. - (pHalData->EarlyRxThreshold << RCR_FIFO_OFFSET) | // Rx FIFO Threshold, 7: No Rx threshold. + RCR_AMF | RCR_ADF | /* accept management/data */ + RCR_ACF | /* accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko. */ + RCR_AB | RCR_AM | RCR_APM | /* accept BC/MC/UC */ + RCR_AICV | RCR_ACRC32 | /* accept ICV/CRC error packet */ + ((u32)7 << RCR_MXDMA_OFFSET) | /* Max DMA Burst Size per Tx DMA Burst, 7: unlimited. */ + (pHalData->EarlyRxThreshold << RCR_FIFO_OFFSET) | /* Rx FIFO Threshold, 7: No Rx threshold. */ (pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt : 0); else #endif priv->ReceiveConfig = - RCR_AMF | RCR_ADF | //accept management/data - RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko. - RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC - ((u32)7 << RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Rx DMA Burst, 7: unlimited. - (priv->EarlyRxThreshold << RX_FIFO_THRESHOLD_SHIFT) | // Rx FIFO Threshold, 7: No Rx threshold. + RCR_AMF | RCR_ADF | /* accept management/data */ + RCR_ACF | /* accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko. */ + RCR_AB | RCR_AM | RCR_APM | /* accept BC/MC/UC */ + ((u32)7 << RCR_MXDMA_OFFSET) | /* Max DMA Burst Size per Rx DMA Burst, 7: unlimited. */ + (priv->EarlyRxThreshold << RX_FIFO_THRESHOLD_SHIFT) | /* Rx FIFO Threshold, 7: No Rx threshold. */ (priv->EarlyRxThreshold == 7 ? RCR_ONLYERLPKT : 0); priv->AcmControl = 0; @@ -2225,11 +2237,11 @@ static void rtl8192_init_priv_variable(struct net_device *dev) priv->rf_set_chan = rtl8192_phy_SwChnl; } -//init lock here +/* init lock here */ static void rtl8192_init_priv_lock(struct r8192_priv *priv) { spin_lock_init(&priv->tx_lock); - spin_lock_init(&priv->irq_lock);//added by thomas + spin_lock_init(&priv->irq_lock); sema_init(&priv->wx_sem, 1); sema_init(&priv->rf_sem, 1); mutex_init(&priv->mutex); @@ -2238,7 +2250,7 @@ static void rtl8192_init_priv_lock(struct r8192_priv *priv) static void rtl819x_watchdog_wqcallback(struct work_struct *work); static void rtl8192_irq_rx_tasklet(struct r8192_priv *priv); -//init tasklet and wait_queue here. only 2.6 above kernel is considered +/* init tasklet and wait_queue here. only 2.6 above kernel is considered */ #define DRV_NAME "wlan0" static void rtl8192_init_priv_task(struct net_device *dev) { @@ -2267,12 +2279,14 @@ static void rtl8192_get_eeprom_size(struct net_device *dev) RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__); read_nic_word_E(dev, EPROM_CMD, &curCR); RT_TRACE(COMP_EPROM, "read from Reg EPROM_CMD(%x):%x\n", EPROM_CMD, curCR); - //whether need I consider BIT5? + /* whether need I consider BIT5? */ priv->epromtype = (curCR & Cmd9346CR_9356SEL) ? EPROM_93c56 : EPROM_93c46; RT_TRACE(COMP_EPROM, "<===========%s(), epromtype:%d\n", __func__, priv->epromtype); } -//used to swap endian. as ntohl & htonl are not necessary to swap endian, so use this instead. +/* used to swap endian. as ntohl & htonl are not necessary + * to swap endian, so use this instead. + */ static inline u16 endian_swap(u16 *data) { u16 tmp = *data; @@ -2288,7 +2302,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev) u16 tmpValue = 0; int i; RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__); - wEPROM_ID = eprom_read(dev, 0); //first read EEPROM ID out; + wEPROM_ID = eprom_read(dev, 0); /* first read EEPROM ID out; */ RT_TRACE(COMP_EPROM, "EEPROM ID is 0x%x\n", wEPROM_ID); if (wEPROM_ID != RTL8190_EEPROM_ID) { @@ -2313,7 +2327,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev) priv->eeprom_CustomerID = 0; } RT_TRACE(COMP_EPROM, "vid:0x%4x, pid:0x%4x, CustomID:0x%2x, ChanPlan:0x%x\n", priv->eeprom_vid, priv->eeprom_pid, priv->eeprom_CustomerID, priv->eeprom_ChannelPlan); - //set channelplan from eeprom + /* set channelplan from eeprom */ priv->ChannelPlan = priv->eeprom_ChannelPlan; if (bLoad_From_EEPOM) { int i; @@ -2324,40 +2338,40 @@ static void rtl8192_read_eeprom_info(struct net_device *dev) } } else { memcpy(dev->dev_addr, bMac_Tmp_Addr, 6); - //should I set IDR0 here? + /* should I set IDR0 here? */ } RT_TRACE(COMP_EPROM, "MAC addr:%pM\n", dev->dev_addr); - priv->rf_type = RTL819X_DEFAULT_RF_TYPE; //default 1T2R + priv->rf_type = RTL819X_DEFAULT_RF_TYPE; /* default 1T2R */ priv->rf_chip = RF_8256; if (priv->card_8192_version == (u8)VERSION_819xU_A) { - //read Tx power gain offset of legacy OFDM to HT rate + /* read Tx power gain offset of legacy OFDM to HT rate */ if (bLoad_From_EEPOM) priv->EEPROMTxPowerDiff = (eprom_read(dev, (EEPROM_TxPowerDiff >> 1)) & 0xff00) >> 8; else priv->EEPROMTxPowerDiff = EEPROM_Default_TxPower; RT_TRACE(COMP_EPROM, "TxPowerDiff:%d\n", priv->EEPROMTxPowerDiff); - //read ThermalMeter from EEPROM + /* read ThermalMeter from EEPROM */ if (bLoad_From_EEPOM) priv->EEPROMThermalMeter = (u8)(eprom_read(dev, (EEPROM_ThermalMeter >> 1)) & 0x00ff); else priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter; RT_TRACE(COMP_EPROM, "ThermalMeter:%d\n", priv->EEPROMThermalMeter); - //vivi, for tx power track + /* for tx power track */ priv->TSSI_13dBm = priv->EEPROMThermalMeter * 100; - //read antenna tx power offset of B/C/D to A from EEPROM + /* read antenna tx power offset of B/C/D to A from EEPROM */ if (bLoad_From_EEPOM) priv->EEPROMPwDiff = (eprom_read(dev, (EEPROM_PwDiff >> 1)) & 0x0f00) >> 8; else priv->EEPROMPwDiff = EEPROM_Default_PwDiff; RT_TRACE(COMP_EPROM, "TxPwDiff:%d\n", priv->EEPROMPwDiff); - // Read CrystalCap from EEPROM + /* Read CrystalCap from EEPROM */ if (bLoad_From_EEPOM) priv->EEPROMCrystalCap = (eprom_read(dev, (EEPROM_CrystalCap >> 1)) & 0x0f); else priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap; RT_TRACE(COMP_EPROM, "CrystalCap = %d\n", priv->EEPROMCrystalCap); - //get per-channel Tx power level + /* get per-channel Tx power level */ if (bLoad_From_EEPOM) priv->EEPROM_Def_Ver = (eprom_read(dev, (EEPROM_TxPwIndex_Ver >> 1)) & 0xff00) >> 8; else @@ -2409,10 +2423,9 @@ static void rtl8192_read_eeprom_info(struct net_device *dev) else tmpValue = 0x10; priv->EEPROMTxPowerLevelOFDM24G[2] = (u8)tmpValue; - }//endif EEPROM_Def_Ver == 1 + } /* endif EEPROM_Def_Ver == 1 */ - //update HAL variables - // + /* update HAL variables */ for (i = 0; i < 14; i++) { if (i <= 3) priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[0]; @@ -2440,18 +2453,19 @@ static void rtl8192_read_eeprom_info(struct net_device *dev) } } priv->TxPowerDiff = priv->EEPROMPwDiff; - // Antenna B gain offset to antenna A, bit0~3 + /* Antenna B gain offset to antenna A, bit0~3 */ priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf); - // Antenna C gain offset to antenna A, bit4~7 + /* Antenna C gain offset to antenna A, bit4~7 */ priv->AntennaTxPwDiff[1] = (priv->EEPROMTxPowerDiff & 0xf0) >> 4; - // CrystalCap, bit12~15 + /* CrystalCap, bit12~15 */ priv->CrystalCap = priv->EEPROMCrystalCap; - // ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2 - // 92U does not enable TX power tracking. + /* ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2 + * 92U does not enable TX power tracking. + */ priv->ThermalMeter[0] = priv->EEPROMThermalMeter; - }//end if VersionID == VERSION_819xU_A + } /* end if VersionID == VERSION_819xU_A */ - //added by vivi, for dlink led, 20080416 + /* for dlink led */ switch (priv->eeprom_CustomerID) { case EEPROM_CID_RUNTOP: priv->CustomerID = RT_CID_819x_RUNTOP; @@ -2489,10 +2503,10 @@ static void rtl8192_read_eeprom_info(struct net_device *dev) RT_TRACE(COMP_EPROM, "\n2T4R config\n"); } - // 2008/01/16 MH We can only know RF type in the function. So we have to init - // DIG RATR table again. + /* We can only know RF type in the function. So we have to init + * DIG RATR table again. + */ init_rate_adaptive(dev); - //we need init DIG RATR table here again. RT_TRACE(COMP_EPROM, "<===========%s()\n", __func__); } @@ -2561,8 +2575,7 @@ static void rtl8192_hwconfig(struct net_device *dev) struct r8192_priv *priv = ieee80211_priv(dev); u32 ratr_value = 0; - // Set RRSR, RATR, and BW_OPMODE registers - // + /* Set RRSR, RATR, and BW_OPMODE registers */ switch (priv->ieee80211->mode) { case WIRELESS_MODE_B: regBwOpMode = BW_OPMODE_20MHZ; @@ -2594,8 +2607,9 @@ static void rtl8192_hwconfig(struct net_device *dev) } break; case WIRELESS_MODE_N_24G: - // It support CCK rate by default. - // CCK rate will be filtered out only when associated AP does not support it. + /* It support CCK rate by default. CCK rate will be filtered + * out only when associated AP does not support it. + */ regBwOpMode = BW_OPMODE_20MHZ; regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS; regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG; @@ -2617,25 +2631,23 @@ static void rtl8192_hwconfig(struct net_device *dev) regRRSR = ((regTmp) << 24) | (regRRSR & 0x00ffffff); write_nic_dword(dev, RRSR, regRRSR); - // - // Set Retry Limit here - // + /* Set Retry Limit here */ write_nic_word(dev, RETRY_LIMIT, priv->ShortRetryLimit << RETRY_LIMIT_SHORT_SHIFT | priv->LongRetryLimit << RETRY_LIMIT_LONG_SHIFT); - // Set Contention Window here + /* Set Contention Window here */ - // Set Tx AGC + /* Set Tx AGC */ - // Set Tx Antenna including Feedback control + /* Set Tx Antenna including Feedback control */ - // Set Auto Rate fallback control + /* Set Auto Rate fallback control */ } -//InitializeAdapter and PhyCfg +/* InitializeAdapter and PhyCfg */ static bool rtl8192_adapter_start(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -2645,7 +2657,7 @@ static bool rtl8192_adapter_start(struct net_device *dev) u8 tmp; RT_TRACE(COMP_INIT, "====>%s()\n", __func__); priv->Rf_Mode = RF_OP_By_SW_3wire; - //for ASIC power on sequence + /* for ASIC power on sequence */ write_nic_byte_E(dev, 0x5f, 0x80); mdelay(50); write_nic_byte_E(dev, 0x5f, 0xf0); @@ -2654,21 +2666,21 @@ static bool rtl8192_adapter_start(struct net_device *dev) write_nic_byte(dev, 0x17, 0x37); mdelay(10); priv->pFirmware->firmware_status = FW_STATUS_0_INIT; - //config CPUReset Register - //Firmware Reset or not? + /* config CPUReset Register */ + /* Firmware Reset or not? */ read_nic_dword(dev, CPU_GEN, &dwRegRead); if (priv->pFirmware->firmware_status == FW_STATUS_0_INIT) - dwRegRead |= CPU_GEN_SYSTEM_RESET; //do nothing here? + dwRegRead |= CPU_GEN_SYSTEM_RESET; /* do nothing here? */ else if (priv->pFirmware->firmware_status == FW_STATUS_5_READY) dwRegRead |= CPU_GEN_FIRMWARE_RESET; else RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __func__, priv->pFirmware->firmware_status); write_nic_dword(dev, CPU_GEN, dwRegRead); - //config BB. + /* config BB. */ rtl8192_BBConfig(dev); - //Loopback mode or not + /* Loopback mode or not */ priv->LoopbackMode = RTL819xU_NO_LOOPBACK; read_nic_dword(dev, CPU_GEN, &dwRegRead); @@ -2681,27 +2693,27 @@ static bool rtl8192_adapter_start(struct net_device *dev) write_nic_dword(dev, CPU_GEN, dwRegRead); - //after reset cpu, we need wait for a seconds to write in register. + /* after reset cpu, we need wait for a seconds to write in register. */ udelay(500); - //xiong add for new bitfile:usb suspend reset pin set to 1. //do we need? + /* add for new bitfile:usb suspend reset pin set to 1. Do we need? */ read_nic_byte_E(dev, 0x5f, &tmp); write_nic_byte_E(dev, 0x5f, tmp | 0x20); - //Set Hardware + /* Set Hardware */ rtl8192_hwconfig(dev); - //turn on Tx/Rx + /* turn on Tx/Rx */ write_nic_byte(dev, CMDR, CR_RE | CR_TE); - //set IDR0 here + /* set IDR0 here */ write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]); write_nic_word(dev, MAC4, ((u16 *)(dev->dev_addr + 4))[0]); - //set RCR + /* set RCR */ write_nic_dword(dev, RCR, priv->ReceiveConfig); - //Initialize Number of Reserved Pages in Firmware Queue + /* Initialize Number of Reserved Pages in Firmware Queue */ write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT | NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT | NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT | @@ -2712,8 +2724,8 @@ static bool rtl8192_adapter_start(struct net_device *dev) NUM_OF_PAGE_IN_FW_QUEUE_BCN << RSVD_FW_QUEUE_PAGE_BCN_SHIFT); write_nic_dword(dev, RATR0 + 4 * 7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK)); - //Set AckTimeout - // TODO: (it value is only for FPGA version). need to be changed!!2006.12.18, by Emily + /* Set AckTimeout */ + /* TODO: (it value is only for FPGA version). need to be changed!! */ write_nic_byte(dev, ACK_TIMEOUT, 0x30); if (priv->ResetProgress == RESET_TYPE_NORESET) @@ -2726,7 +2738,7 @@ static bool rtl8192_adapter_start(struct net_device *dev) write_nic_byte(dev, SECR, SECR_value); } - //Beacon related + /* Beacon related */ write_nic_word(dev, ATIMWND, 2); write_nic_word(dev, BCN_INTERVAL, 100); @@ -2744,20 +2756,22 @@ static bool rtl8192_adapter_start(struct net_device *dev) rtl8192_phy_setTxPower(dev, priv->chan); } - //Firmware download + /* Firmware download */ init_status = init_firmware(dev); if (!init_status) { RT_TRACE(COMP_ERR, "ERR!!! %s(): Firmware download is failed\n", __func__); return init_status; } RT_TRACE(COMP_INIT, "%s():after firmware download\n", __func__); - // + #ifdef TO_DO_LIST if (Adapter->ResetProgress == RESET_TYPE_NORESET) { if (pMgntInfo->RegRfOff) { /* User disable RF via registry. */ RT_TRACE((COMP_INIT | COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n")); MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW); - // Those actions will be discard in MgntActSet_RF_State because of the same state + /* Those actions will be discard in MgntActSet_RF_State + * because of the same state + */ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); } else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) { /* H/W or S/W RF OFF before sleep. */ @@ -2771,13 +2785,15 @@ static bool rtl8192_adapter_start(struct net_device *dev) } else { if (pHalData->eRFPowerState == eRfOff) { MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason); - // Those actions will be discard in MgntActSet_RF_State because of the same state + /* Those actions will be discard in MgntActSet_RF_State + * because of the same state + */ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); } } #endif - //config RF. + /* config RF. */ if (priv->ResetProgress == RESET_TYPE_NORESET) { rtl8192_phy_RFConfig(dev); RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __func__); @@ -2785,7 +2801,7 @@ static bool rtl8192_adapter_start(struct net_device *dev) if (priv->ieee80211->FwRWRF) - // We can force firmware to do RF-R/W + /* We can force firmware to do RF-R/W */ priv->Rf_Mode = RF_OP_By_FW; else priv->Rf_Mode = RF_OP_By_SW_3wire; @@ -2797,7 +2813,7 @@ static bool rtl8192_adapter_start(struct net_device *dev) rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1); if (priv->ResetProgress == RESET_TYPE_NORESET) { - //if D or C cut + /* if D or C cut */ u8 tmpvalue; read_nic_byte(dev, 0x301, &tmpvalue); if (tmpvalue == 0x03) { @@ -2882,9 +2898,7 @@ static RESET_TYPE TxCheckStuck(struct net_device *dev) u8 QueueID; bool bCheckFwTxCnt = false; - // - // Decide such threshold according to current power save mode - // + /* Decide such threshold according to current power save mode */ for (QueueID = 0; QueueID <= BEACON_QUEUE; QueueID++) { if (QueueID == TXCMD_QUEUE) @@ -2911,11 +2925,12 @@ static bool HalRxCheckStuck819xUsb(struct net_device *dev) static u8 rx_chk_cnt; read_nic_word(dev, 0x130, &RegRxCounter); RT_TRACE(COMP_RESET, "%s(): RegRxCounter is %d,RxCounter is %d\n", __func__, RegRxCounter, priv->RxCounter); - // If rssi is small, we should check rx for long time because of bad rx. - // or maybe it will continuous silent reset every 2 seconds. + /* If rssi is small, we should check rx for long time because of bad rx. + * or maybe it will continuous silent reset every 2 seconds. + */ rx_chk_cnt++; if (priv->undecorated_smoothed_pwdb >= (RateAdaptiveTH_High + 5)) { - rx_chk_cnt = 0; //high rssi, check rx stuck right now. + rx_chk_cnt = 0; /* high rssi, check rx stuck right now. */ } else if (priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High + 5) && ((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20 && priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_40M) || (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 && priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_20M))) { @@ -2987,14 +3002,18 @@ static RESET_TYPE rtl819x_ifcheck_resetornot(struct net_device *dev) TxResetType = TxCheckStuck(dev); if (rfState != eRfOff || (priv->ieee80211->iw_mode != IW_MODE_ADHOC)) { - // If driver is in the status of firmware download failure , driver skips RF initialization and RF is - // in turned off state. Driver should check whether Rx stuck and do silent reset. And - // if driver is in firmware download failure status, driver should initialize RF in the following - // silent reset procedure Emily, 2008.01.21 - - // Driver should not check RX stuck in IBSS mode because it is required to - // set Check BSSID in order to send beacon, however, if check BSSID is - // set, STA cannot hear any packet at all. Emily, 2008.04.12 + /* If driver is in the status of firmware download failure, + * driver skips RF initialization and RF is in turned off + * state. Driver should check whether Rx stuck and do silent + * reset. And if driver is in firmware download failure status, + * driver should initialize RF in the following silent reset + * procedure + * + * Driver should not check RX stuck in IBSS mode because it is + * required to set Check BSSID in order to send beacon, + * however, if check BSSID is set, STA cannot hear any packet + * at all. + */ RxResetType = RxCheckStuck(dev); } if (TxResetType == RESET_TYPE_NORMAL || RxResetType == RESET_TYPE_NORMAL) { @@ -3084,12 +3103,11 @@ static void CamRestoreAllEntry(struct net_device *dev) CAM_CONST_ADDR[0], 0, NULL); } } -////////////////////////////////////////////////////////////// -// This function is used to fix Tx/Rx stop bug temporarily. -// This function will do "system reset" to NIC when Tx or Rx is stuck. -// The method checking Tx/Rx stuck of this function is supported by FW, -// which reports Tx and Rx counter to register 0x128 and 0x130. -////////////////////////////////////////////////////////////// +/* This function is used to fix Tx/Rx stop bug temporarily. + * This function will do "system reset" to NIC when Tx or Rx is stuck. + * The method checking Tx/Rx stuck of this function is supported by FW, + * which reports Tx and Rx counter to register 0x128 and 0x130. + */ static void rtl819x_ifsilentreset(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -3098,15 +3116,15 @@ static void rtl819x_ifsilentreset(struct net_device *dev) struct ieee80211_device *ieee = priv->ieee80211; - // 2007.07.20. If we need to check CCK stop, please uncomment this line. - //bStuck = Adapter->HalFunc.CheckHWStopHandler(Adapter); + /* If we need to check CCK stop, please uncomment this line. */ + /* bStuck = Adapter->HalFunc.CheckHWStopHandler(Adapter); */ if (priv->ResetProgress == RESET_TYPE_NORESET) { RESET_START: RT_TRACE(COMP_RESET, "=========>Reset progress!! \n"); - // Set the variable for reset. + /* Set the variable for reset. */ priv->ResetProgress = RESET_TYPE_SILENT; down(&priv->wx_sem); if (priv->up == 0) { @@ -3176,7 +3194,7 @@ RESET_START: priv->bForcedSilentReset = false; priv->bResetInProgress = false; - // For test --> force write UFWP. + /* For test --> force write UFWP. */ write_nic_byte(dev, UFWP, 1); RT_TRACE(COMP_RESET, "Reset finished!! ====>[%d]\n", priv->reset_count); } @@ -3217,7 +3235,7 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work) return; hal_dm_watchdog(dev); - //to get busy traffic condition + /* to get busy traffic condition */ if (ieee->state == IEEE80211_LINKED) { if (ieee->LinkDetectInfo.NumRxOkInPeriod > 666 || ieee->LinkDetectInfo.NumTxOkInPeriod > 666) { @@ -3227,7 +3245,7 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work) ieee->LinkDetectInfo.NumTxOkInPeriod = 0; ieee->LinkDetectInfo.bBusyTraffic = bBusyTraffic; } - //added by amy for AP roaming + /* for AP roaming */ if (priv->ieee80211->state == IEEE80211_LINKED && priv->ieee80211->iw_mode == IW_MODE_INFRA) { rtl819x_update_rxcounts(priv, &TotalRxBcnNum, &TotalRxDataNum); @@ -3247,7 +3265,7 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work) } priv->ieee80211->LinkDetectInfo.NumRecvBcnInPeriod = 0; priv->ieee80211->LinkDetectInfo.NumRecvDataInPeriod = 0; - //check if reset the driver + /* check if reset the driver */ if (check_reset_cnt++ >= 3) { ResetType = rtl819x_ifcheck_resetornot(dev); check_reset_cnt = 3; @@ -3363,7 +3381,9 @@ int rtl8192_down(struct net_device *dev) for (i = 0; i < MAX_QUEUE_SIZE; i++) skb_queue_purge(&priv->ieee80211->skb_drv_aggQ[i]); - //as cancel_delayed_work will del work->timer, so if work is not defined as struct delayed_work, it will corrupt + /* as cancel_delayed_work will del work->timer, so if work is not + * defined as struct delayed_work, it will corrupt + */ rtl8192_cancel_deferred_work(priv); deinit_hal_dm(dev); del_timer_sync(&priv->watch_dog_timer); @@ -3465,7 +3485,7 @@ static int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) switch (cmd) { case RTL_IOCTL_WPA_SUPPLICANT: - //parse here for HW security + /* parse here for HW security */ if (ipw->cmd == IEEE_CMD_SET_ENCRYPTION) { if (ipw->u.crypt.set_tx) { if (strcmp(ipw->u.crypt.alg, "CCMP") == 0) { @@ -3484,8 +3504,12 @@ static int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) if (ieee->pairwise_key_type) { memcpy((u8 *)key, ipw->u.crypt.key, 16); EnableHWSecurityConfig8192(dev); - //we fill both index entry and 4th entry for pairwise key as in IPW interface, adhoc will only get here, so we need index entry for its default key serching! - //added by WB. + /* We fill both index entry and 4th + * entry for pairwise key as in IPW + * interface, adhoc will only get here, + * so we need index entry for its + * default key serching! + */ setKey(dev, 4, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8 *)ieee->ap_mac_addr, 0, key); if (ieee->auth_mode != 2) setKey(dev, ipw->u.crypt.idx, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8 *)ieee->ap_mac_addr, 0, key); @@ -3507,11 +3531,11 @@ static int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) if (ieee->group_key_type) { setKey(dev, ipw->u.crypt.idx, - ipw->u.crypt.idx, //KeyIndex - ieee->group_key_type, //KeyType - broadcast_addr, //MacAddr - 0, //DefaultKey - key); //KeyContent + ipw->u.crypt.idx, /* KeyIndex */ + ieee->group_key_type, /* KeyType */ + broadcast_addr, /* MacAddr */ + 0, /* DefaultKey */ + key); /* KeyContent */ } } } @@ -3671,13 +3695,11 @@ static void UpdateRxPktTimeStamp8190(struct net_device *dev, } } -//by amy 080606 - -static long rtl819x_translate_todbm(u8 signal_strength_index)// 0-100 index. +static long rtl819x_translate_todbm(u8 signal_strength_index) /* 0-100 index. */ { - long signal_power; // in dBm. + long signal_power; /* in dBm. */ - // Translate to dBm (x=0.5y-95). + /* Translate to dBm (x=0.5y-95). */ signal_power = (long)((signal_strength_index + 1) >> 1); signal_power -= 95; @@ -3685,10 +3707,11 @@ static long rtl819x_translate_todbm(u8 signal_strength_index)// 0-100 index. } -/* 2008/01/22 MH We can not declare RSSI/EVM total value of sliding window to - be a local static. Otherwise, it may increase when we return from S3/S4. The - value will be kept in memory or disk. Declare the value in the adaptor - and it will be reinitialized when returned from S3/S4. */ +/* We can not declare RSSI/EVM total value of sliding window to + * be a local static. Otherwise, it may increase when we return from S3/S4. The + * value will be kept in memory or disk. Declare the value in the adaptor + * and it will be reinitialized when returned from S3/S4. + */ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer, struct ieee80211_rx_stats *pprevious_stats, struct ieee80211_rx_stats *pcurrent_stats) @@ -3710,13 +3733,12 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer, sc = le16_to_cpu(hdr->seq_ctl); frag = WLAN_GET_SEQ_FRAG(sc); seq = WLAN_GET_SEQ_SEQ(sc); - //cosa add 04292008 to record the sequence number + /* to record the sequence number */ pcurrent_stats->Seq_Num = seq; - // - // Check whether we should take the previous packet into accounting - // + + /* Check whether we should take the previous packet into accounting */ if (!pprevious_stats->bIsAMPDU) { - // if previous packet is not aggregated packet + /* if previous packet is not aggregated packet */ bcheck = true; } @@ -3731,13 +3753,12 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer, if (slide_rssi_index >= PHY_RSSI_SLID_WIN_MAX) slide_rssi_index = 0; - // <1> Showed on UI for user, in dbm + /* <1> Showed on UI for user, in dbm */ tmp_val = priv->stats.slide_rssi_total / slide_rssi_statistics; priv->stats.signal_strength = rtl819x_translate_todbm((u8)tmp_val); pcurrent_stats->rssi = priv->stats.signal_strength; - // - // If the previous packet does not match the criteria, neglect it - // + + /* If the previous packet does not match the criteria, neglect it */ if (!pprevious_stats->bPacketMatchBSSID) { if (!pprevious_stats->bToSelfBA) return; @@ -3747,24 +3768,24 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer, return; - //rtl8190_process_cck_rxpathsel(priv,pprevious_stats);//only rtl8190 supported + /* only rtl8190 supported + * rtl8190_process_cck_rxpathsel(priv,pprevious_stats); + */ - // - // Check RSSI - // + /* Check RSSI */ priv->stats.num_process_phyinfo++; /* record the general signal strength to the sliding window. */ - // <2> Showed on UI for engineering - // hardware does not provide rssi information for each rf path in CCK + /* <2> Showed on UI for engineering + * hardware does not provide rssi information for each rf path in CCK + */ if (!pprevious_stats->bIsCCK && (pprevious_stats->bPacketToSelf || pprevious_stats->bToSelfBA)) { for (rfpath = RF90_PATH_A; rfpath < priv->NumTotalRFPath; rfpath++) { if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, rfpath)) continue; - //Fixed by Jacken 2008-03-20 if (priv->stats.rx_rssi_percentage[rfpath] == 0) priv->stats.rx_rssi_percentage[rfpath] = pprevious_stats->RxMIMOSignalStrength[rfpath]; if (pprevious_stats->RxMIMOSignalStrength[rfpath] > priv->stats.rx_rssi_percentage[rfpath]) { @@ -3782,9 +3803,7 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer, } - // - // Check PWDB. - // + /* Check PWDB. */ RT_TRACE(COMP_RXDESC, "Smooth %s PWDB = %d\n", pprevious_stats->bIsCCK ? "CCK" : "OFDM", pprevious_stats->RxPWDBAll); @@ -3827,9 +3846,7 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer, } - // - // Check EVM - // + /* Check EVM */ /* record the general EVM to the sliding window. */ if (pprevious_stats->SignalQuality) { if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) { @@ -3845,14 +3862,14 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer, if (slide_evm_index >= PHY_RSSI_SLID_WIN_MAX) slide_evm_index = 0; - // <1> Showed on UI for user, in percentage. + /* <1> Showed on UI for user, in percentage. */ tmp_val = priv->stats.slide_evm_total / slide_evm_statistics; priv->stats.signal_quality = tmp_val; - //cosa add 10/11/2007, Showed on UI for user in Windows Vista, for Link quality. + /* Showed on UI for user in Windows Vista, for Link quality. */ priv->stats.last_signal_strength_inpercent = tmp_val; } - // <2> Showed on UI for engineering + /* <2> Showed on UI for engineering */ if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) { for (nspatial_stream = 0; nspatial_stream < 2; nspatial_stream++) { /* 2 spatial stream */ if (pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1) { @@ -3912,16 +3929,12 @@ static u8 rtl819x_evm_dbtopercentage(char value) ret_val = 100; return ret_val; } -// -// Description: -// We want good-looking for signal strength/quality -// 2007/7/19 01:09, by cosa. -// +/* We want good-looking for signal strength/quality */ static long rtl819x_signal_scale_mapping(long currsig) { long retsig; - // Step 1. Scale mapping. + /* Step 1. Scale mapping. */ if (currsig >= 61 && currsig <= 100) retsig = 90 + ((currsig - 60) / 4); else if (currsig >= 41 && currsig <= 60) @@ -3989,7 +4002,7 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv, is_cck_rate = rx_hal_is_cck_rate(pdrvinfo); - // Record it for next packet processing + /* Record it for next packet processing */ memset(precord_stats, 0, sizeof(struct ieee80211_rx_stats)); pstats->bPacketMatchBSSID = precord_stats->bPacketMatchBSSID = bpacket_match_bssid; pstats->bPacketToSelf = precord_stats->bPacketToSelf = bpacket_toself; @@ -4012,13 +4025,9 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv, precord_stats->RxMIMOSignalQuality[1] = -1; if (is_cck_rate) { - // - // (1)Hardware does not provide RSSI for CCK - // + /* (1)Hardware does not provide RSSI for CCK */ - // - // (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive) - // + /* (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive) */ u8 report; priv->stats.numqry_phystatusCCK++; @@ -4027,9 +4036,6 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv, report = pcck_buf->cck_agc_rpt & 0xc0; report >>= 6; switch (report) { - //Fixed by Jacken from Bryant 2008-03-20 - //Original value is -38 , -26 , -14 , -2 - //Fixed value is -35 , -23 , -11 , 6 case 0x3: rx_pwr_all = -35 - (pcck_buf->cck_agc_rpt & 0x3e); break; @@ -4066,9 +4072,7 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv, pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all; pstats->RecvSignalPower = pwdb_all; - // - // (3) Get Signal Quality (EVM) - // + /* (3) Get Signal Quality (EVM) */ if (pstats->RxPWDBAll > 40) { sq = 100; @@ -4088,11 +4092,10 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv, } else { priv->stats.numqry_phystatusHT++; - // - // (1)Get RSSI for HT rate - // + + /* (1)Get RSSI for HT rate */ for (i = RF90_PATH_A; i < priv->NumTotalRFPath; i++) { - // 2008/01/30 MH we will judge RF RX path now. + /* We will judge RF RX path now. */ if (priv->brfpath_rxenable[i]) rf_rx_num++; else @@ -4101,11 +4104,9 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv, if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, i)) continue; - //Fixed by Jacken from Bryant 2008-03-20 - //Original value is 106 rx_pwr[i] = ((pofdm_buf->trsw_gain_X[i] & 0x3F) * 2) - 106; - //Get Rx snr value in DB + /* Get Rx snr value in DB */ tmp_rxsnr = pofdm_buf->rxsnr_X[i]; rx_snrX = (char)(tmp_rxsnr); rx_snrX /= 2; @@ -4121,34 +4122,34 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv, } - // - // (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive) - // - //Fixed by Jacken from Bryant 2008-03-20 - //Original value is 106 + /* (2)PWDB, Average PWDB cacluated by hardware + * (for rate adaptive) + */ rx_pwr_all = (((pofdm_buf->pwdb_all) >> 1) & 0x7f) - 106; pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all); pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all; pstats->RxPower = precord_stats->RxPower = rx_pwr_all; - // - // (3)EVM of HT rate - // + /* (3)EVM of HT rate */ if (pdrvinfo->RxHT && pdrvinfo->RxRate >= DESC90_RATEMCS8 && pdrvinfo->RxRate <= DESC90_RATEMCS15) - max_spatial_stream = 2; //both spatial stream make sense + max_spatial_stream = 2; /* both spatial stream make sense */ else - max_spatial_stream = 1; //only spatial stream 1 makes sense + max_spatial_stream = 1; /* only spatial stream 1 makes sense */ for (i = 0; i < max_spatial_stream; i++) { tmp_rxevm = pofdm_buf->rxevm_X[i]; rx_evmX = (char)(tmp_rxevm); - // Do not use shift operation like "rx_evmX >>= 1" because the compiler of free build environment - // will set the most significant bit to "zero" when doing shifting operation which may change a negative - // value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore. - rx_evmX /= 2; //dbm + /* Do not use shift operation like "rx_evmX >>= 1" + * because the compiler of free build environment will + * set the most significant bit to "zero" when doing + * shifting operation which may change a negative value + * to positive one, then the dbm value (which is + * supposed to be negative) is not correct anymore. + */ + rx_evmX /= 2; /* dbm */ evm = rtl819x_evm_dbtopercentage(rx_evmX); if (i == 0) /* Fill value in RFD, Get the first spatial stream only */ @@ -4162,16 +4163,18 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv, prxsc = (phy_ofdm_rx_status_rxsc_sgien_exintfflag *)&rxsc_sgien_exflg; if (pdrvinfo->BW) /* 40M channel */ priv->stats.received_bwtype[1 + prxsc->rxsc]++; - else //20M channel + else /* 20M channel */ priv->stats.received_bwtype[0]++; } - //UI BSS List signal strength(in percentage), make it good looking, from 0~100. - //It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp(). + /* UI BSS List signal strength(in percentage), make it good looking, + * from 0~100. It is assigned to the BSS List in + * GetValueFromBeaconOrProbeRsp(). + */ if (is_cck_rate) { pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)pwdb_all)); } else { - // We can judge RX path number now. + /* We can judge RX path number now. */ if (rf_rx_num != 0) pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)(total_rssi /= rf_rx_num))); } @@ -4190,17 +4193,19 @@ static void TranslateRxSignalStuff819xUsb(struct sk_buff *skb, struct ieee80211_rx_stats *pstats, rx_drvinfo_819x_usb *pdrvinfo) { - // TODO: We must only check packet for current MAC address. Not finish + /* TODO: We must only check packet for current MAC address. + * Not finish + */ struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb; struct net_device *dev = info->dev; struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); bool bpacket_match_bssid, bpacket_toself; bool bPacketBeacon = false, bToSelfBA = false; static struct ieee80211_rx_stats previous_stats; - struct rtl_80211_hdr_3addr *hdr;//by amy + struct rtl_80211_hdr_3addr *hdr; u16 fc, type; - // Get Signal Quality for only RX data queue (but not command queue) + /* Get Signal Quality for only RX data queue (but not command queue) */ u8 *tmp_buf; u8 *praddr; @@ -4232,11 +4237,10 @@ static void TranslateRxSignalStuff819xUsb(struct sk_buff *skb, priv->stats.numpacket_matchbssid++; if (bpacket_toself) priv->stats.numpacket_toself++; - // - // Process PHY information for previous packet (RSSI/PWDB/EVM) - // - // Because phy information is contained in the last packet of AMPDU only, so driver - // should process phy information of previous packet + /* Process PHY information for previous packet (RSSI/PWDB/EVM) + * Because phy information is contained in the last packet of AMPDU + * only, so driver should process phy information of previous packet + */ rtl8192_process_phyinfo(priv, tmp_buf, &previous_stats, pstats); rtl8192_query_rxphystatus(priv, pstats, pdrvinfo, &previous_stats, bpacket_match_bssid, bpacket_toself, bPacketBeacon, bToSelfBA); rtl8192_record_rxdesc_forlateruse(pstats, &previous_stats); @@ -4262,9 +4266,9 @@ UpdateReceivedRateHistogramStatistics8190(struct net_device *dev, struct ieee80211_rx_stats *stats) { struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); - u32 rcvType = 1; //0: Total, 1:OK, 2:CRC, 3:ICV + u32 rcvType = 1; /* 0: Total, 1:OK, 2:CRC, 3:ICV */ u32 rateIndex; - u32 preamble_guardinterval; //1: short preamble/GI, 0: long preamble/GI + u32 preamble_guardinterval; /* 1: short preamble/GI, 0: long preamble/GI */ if (stats->bCRC) @@ -4273,9 +4277,9 @@ UpdateReceivedRateHistogramStatistics8190(struct net_device *dev, rcvType = 3; if (stats->bShortPreamble) - preamble_guardinterval = 1;// short + preamble_guardinterval = 1; /* short */ else - preamble_guardinterval = 0;// long + preamble_guardinterval = 0; /* long */ switch (stats->rate) { /* CCK rate */ @@ -4370,7 +4374,7 @@ UpdateReceivedRateHistogramStatistics8190(struct net_device *dev, break; } priv->stats.received_preamble_GI[preamble_guardinterval][rateIndex]++; - priv->stats.received_rate_histogram[0][rateIndex]++; //total + priv->stats.received_rate_histogram[0][rateIndex]++; /* total */ priv->stats.received_rate_histogram[rcvType][rateIndex]++; } @@ -4384,9 +4388,7 @@ static void query_rxdesc_status(struct sk_buff *skb, struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); rx_drvinfo_819x_usb *driver_info = NULL; - // - //Get Rx Descriptor Information - // + /* Get Rx Descriptor Information */ rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data; stats->Length = desc->Length; @@ -4406,11 +4408,10 @@ static void query_rxdesc_status(struct sk_buff *skb, if (stats->Length < 24 || stats->Length > MAX_8192U_RX_SIZE) stats->bHwError |= 1; - // - //Get Driver Info - // - // TODO: Need to verify it on FGPA platform - //Driver info are written to the RxBuffer following rx desc + /* Get Driver Info */ + /* TODO: Need to verify it on FGPA platform + * Driver info are written to the RxBuffer following rx desc + */ if (stats->RxDrvInfoSize != 0) { driver_info = (rx_drvinfo_819x_usb *)(skb->data + sizeof(rx_desc_819x_usb) + stats->RxBufShift); @@ -4420,11 +4421,13 @@ static void query_rxdesc_status(struct sk_buff *skb, u8 ret_rate; ret_rate = HwRateToMRate90(driver_info->RxHT, driver_info->RxRate); if (ret_rate == 0xff) { - // Abnormal Case: Receive CRC OK packet with Rx descriptor indicating non supported rate. - // Special Error Handling here, 2008.05.16, by Emily + /* Abnormal Case: Receive CRC OK packet with Rx + * descriptor indicating non supported rate. + * Special Error Handling here + */ stats->bHwError = 1; - stats->rate = MGN_1M; //Set 1M rate by default + stats->rate = MGN_1M; /* Set 1M rate by default */ } else { stats->rate = ret_rate; } @@ -4440,13 +4443,10 @@ static void query_rxdesc_status(struct sk_buff *skb, stats->bIsAMPDU = (driver_info->PartAggr == 1); stats->bFirstMPDU = (driver_info->PartAggr == 1) && (driver_info->FirstAGGR == 1); stats->TimeStampLow = driver_info->TSFL; - // xiong mask it, 070514 UpdateRxPktTimeStamp8190(dev, stats); - // - // Rx A-MPDU - // + /* Rx A-MPDU */ if (driver_info->FirstAGGR == 1 || driver_info->PartAggr == 1) RT_TRACE(COMP_RXDESC, "driver_info->FirstAGGR = %d, driver_info->PartAggr = %d\n", driver_info->FirstAGGR, driver_info->PartAggr); @@ -4454,9 +4454,7 @@ static void query_rxdesc_status(struct sk_buff *skb, } skb_pull(skb, sizeof(rx_desc_819x_usb)); - // - // Get Total offset of MPDU Frame Body - // + /* Get Total offset of MPDU Frame Body */ if ((stats->RxBufShift + stats->RxDrvInfoSize) > 0) { stats->bShift = 1; skb_pull(skb, stats->RxBufShift + stats->RxDrvInfoSize); @@ -4496,9 +4494,9 @@ static void rtl8192_rx_nomal(struct sk_buff *skb) ieee80211_hdr = (struct rtl_80211_hdr_1addr *)skb->data; unicast_packet = false; if (is_broadcast_ether_addr(ieee80211_hdr->addr1)) { - //TODO + /* TODO */ } else if (is_multicast_ether_addr(ieee80211_hdr->addr1)) { - //TODO + /* TODO */ } else { /* unicast packet */ unicast_packet = true; @@ -4526,20 +4524,20 @@ static void rtl819xusb_process_received_packet(struct net_device *dev, u16 frame_len = 0; struct r8192_priv *priv = ieee80211_priv(dev); - // Get shifted bytes of Starting address of 802.11 header. 2006.09.28, by Emily - //porting by amy 080508 + /* Get shifted bytes of Starting address of 802.11 header. */ pstats->virtual_address += get_rxpacket_shiftbytes_819xusb(pstats); frame = pstats->virtual_address; frame_len = pstats->packetlength; -#ifdef TODO // by amy about HCT +#ifdef TODO /* about HCT */ if (!Adapter->bInHctTest) CountRxErrStatistics(Adapter, pRfd); #endif -#ifdef ENABLE_PS //by amy for adding ps function in future +#ifdef ENABLE_PS /* for adding ps function in future */ RT_RF_POWER_STATE rtState; - // When RF is off, we should not count the packet for hw/sw synchronize - // reason, ie. there may be a duration while sw switch is changed and hw - // switch is being changed. 2006.12.04, by shien chang. + /* When RF is off, we should not count the packet for hw/sw synchronize + * reason, ie. there may be a duration while sw switch is changed and + * hw switch is being changed. + */ Adapter->HalFunc.GetHwRegHandler(Adapter, HW_VAR_RF_STATE, (u8 *)(&rtState)); if (rtState == eRfOff) return; @@ -4549,8 +4547,7 @@ static void rtl819xusb_process_received_packet(struct net_device *dev, #ifdef TODO RmMonitorSignalStrength(Adapter, pRfd); #endif - /* 2007/01/16 MH Add RX command packet handle here. */ - /* 2007/03/01 MH We have to release RFD and return if rx pkt is cmd pkt. */ + /* We have to release RFD and return if rx pkt is cmd pkt. */ if (rtl819xusb_rx_command_packet(dev, pstats)) return; @@ -4566,9 +4563,7 @@ static void query_rx_cmdpkt_desc_status(struct sk_buff *skb, { rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data; - // - //Get Rx Descriptor Information - // + /* Get Rx Descriptor Information */ stats->virtual_address = (u8 *)skb->data; stats->Length = desc->Length; stats->RxDrvInfoSize = 0; @@ -4595,12 +4590,9 @@ static void rtl8192_rx_cmd(struct sk_buff *skb) if ((skb->len >= (20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) { query_rx_cmdpkt_desc_status(skb, &stats); - // this is to be done by amy 080508 prfd->queue_id = 1; + /* prfd->queue_id = 1; */ - - // - // Process the command packet received. - // + /* Process the command packet received. */ rtl819xusb_process_received_packet(dev, &stats); @@ -4725,7 +4717,7 @@ fail: return ret; } -//detach all the work and timer structure declared or inititialize in r8192U_init function. +/* detach all the work and timer structure declared or inititialize in r8192U_init function. */ static void rtl8192_cancel_deferred_work(struct r8192_priv *priv) { @@ -4839,8 +4831,12 @@ void EnableHWSecurityConfig8192(struct net_device *dev) SECR_value |= SCR_RxUseDK; SECR_value |= SCR_TxUseDK; } - //add HWSec active enable here. - //default using hwsec. when peer AP is in N mode only and pairwise_key_type is none_aes(which HT_IOT_ACT_PURE_N_MODE indicates it), use software security. when peer AP is in b,g,n mode mixed and pairwise_key_type is none_aes, use g mode hw security. WB on 2008.7.4 + /* add HWSec active enable here. + * default using hwsec. when peer AP is in N mode only and + * pairwise_key_type is none_aes(which HT_IOT_ACT_PURE_N_MODE indicates + * it), use software security. when peer AP is in b,g,n mode mixed and + * pairwise_key_type is none_aes, use g mode hw security. + */ ieee->hwsec_active = 1; @@ -4891,7 +4887,7 @@ void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType, write_nic_dword(dev, WCAMI, TargetContent); write_nic_dword(dev, RWCAM, TargetCommand); } else { - //Key Material + /* Key Material */ if (KeyContent != NULL) { write_nic_dword(dev, WCAMI, (u32)(*(KeyContent + i - 2))); write_nic_dword(dev, RWCAM, TargetCommand); -- 2.30.2