From 12488e01fb2b06bb3f6ee137efc88e29d827817e Mon Sep 17 00:00:00 2001 From: Nishant Sarmukadam Date: Fri, 8 Apr 2011 14:38:27 +0530 Subject: [PATCH] mwl8k: interrupt handling changes We do not need to enable all the interrupts in mwl8k_probe_hw. We need to enable only MWL8K_A2H_INT_OPC_DONE interrupt for sending commands to the firmware. Keep the other interrupts masked in mwl8k_probe_hw. Also, in mwl8k_start, where we expect other interrupts, enable only those interrupts we are interested in. Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index fb472f4924d0..d2416709ba52 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -4284,6 +4284,8 @@ static int mwl8k_start(struct ieee80211_hw *hw) /* Enable interrupts */ iowrite32(MWL8K_A2H_EVENTS, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK); + iowrite32(MWL8K_A2H_EVENTS, + priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); rc = mwl8k_fw_lock(hw); if (!rc) { @@ -5282,7 +5284,8 @@ static int mwl8k_probe_hw(struct ieee80211_hw *hw) iowrite32(MWL8K_A2H_INT_TX_DONE|MWL8K_A2H_INT_RX_READY| MWL8K_A2H_INT_BA_WATCHDOG, priv->regs + MWL8K_HIU_A2H_INTERRUPT_CLEAR_SEL); - iowrite32(0xffffffff, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); + iowrite32(MWL8K_A2H_INT_OPC_DONE, + priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); rc = request_irq(priv->pdev->irq, mwl8k_interrupt, IRQF_SHARED, MWL8K_NAME, hw); -- 2.30.2