From 123c1407af877b9b036b852b77013a6f9f6049b0 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 30 May 2013 00:28:06 +0000 Subject: [PATCH] net: emaclite: Do not use microblaze and ppc IO functions Emaclite can be used on ARM zynq where in_be32/out_be32 IO functions are not present. Use standard __raw_readl/__raw_writel IO functions instead. Signed-off-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 138 +++++++++--------- 1 file changed, 69 insertions(+), 69 deletions(-) diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 93bb14e04d84..9227ed7bce10 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -159,34 +159,32 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata) u32 reg_data; /* Enable the Tx interrupts for the first Buffer */ - reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET); - out_be32(drvdata->base_addr + XEL_TSR_OFFSET, - reg_data | XEL_TSR_XMIT_IE_MASK); + reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET); + __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK, + drvdata->base_addr + XEL_TSR_OFFSET); /* Enable the Tx interrupts for the second Buffer if * configured in HW */ if (drvdata->tx_ping_pong != 0) { - reg_data = in_be32(drvdata->base_addr + + reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); - out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_TSR_OFFSET, - reg_data | XEL_TSR_XMIT_IE_MASK); + __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK, + drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_TSR_OFFSET); } /* Enable the Rx interrupts for the first buffer */ - out_be32(drvdata->base_addr + XEL_RSR_OFFSET, - XEL_RSR_RECV_IE_MASK); + __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET); /* Enable the Rx interrupts for the second Buffer if * configured in HW */ if (drvdata->rx_ping_pong != 0) { - out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_RSR_OFFSET, - XEL_RSR_RECV_IE_MASK); + __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET); } /* Enable the Global Interrupt Enable */ - out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK); + __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); } /** @@ -201,37 +199,37 @@ static void xemaclite_disable_interrupts(struct net_local *drvdata) u32 reg_data; /* Disable the Global Interrupt Enable */ - out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK); + __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); /* Disable the Tx interrupts for the first buffer */ - reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET); - out_be32(drvdata->base_addr + XEL_TSR_OFFSET, - reg_data & (~XEL_TSR_XMIT_IE_MASK)); + reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET); + __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), + drvdata->base_addr + XEL_TSR_OFFSET); /* Disable the Tx interrupts for the second Buffer * if configured in HW */ if (drvdata->tx_ping_pong != 0) { - reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + + reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); - out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_TSR_OFFSET, - reg_data & (~XEL_TSR_XMIT_IE_MASK)); + __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), + drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_TSR_OFFSET); } /* Disable the Rx interrupts for the first buffer */ - reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET); - out_be32(drvdata->base_addr + XEL_RSR_OFFSET, - reg_data & (~XEL_RSR_RECV_IE_MASK)); + reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET); + __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), + drvdata->base_addr + XEL_RSR_OFFSET); /* Disable the Rx interrupts for the second buffer * if configured in HW */ if (drvdata->rx_ping_pong != 0) { - reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + + reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET); - out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_RSR_OFFSET, - reg_data & (~XEL_RSR_RECV_IE_MASK)); + __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), + drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_RSR_OFFSET); } } @@ -351,7 +349,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, byte_count = ETH_FRAME_LEN; /* Check if the expected buffer is available */ - reg_data = in_be32(addr + XEL_TSR_OFFSET); + reg_data = __raw_readl(addr + XEL_TSR_OFFSET); if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK)) == 0) { @@ -364,7 +362,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, addr = (void __iomem __force *)((u32 __force)addr ^ XEL_BUFFER_OFFSET); - reg_data = in_be32(addr + XEL_TSR_OFFSET); + reg_data = __raw_readl(addr + XEL_TSR_OFFSET); if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK)) != 0) @@ -375,15 +373,16 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, /* Write the frame to the buffer */ xemaclite_aligned_write(data, (u32 __force *) addr, byte_count); - out_be32(addr + XEL_TPLR_OFFSET, (byte_count & XEL_TPLR_LENGTH_MASK)); + __raw_writel((byte_count & XEL_TPLR_LENGTH_MASK), + addr + XEL_TPLR_OFFSET); /* Update the Tx Status Register to indicate that there is a * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which * is used by the interrupt handler to check whether a frame * has been transmitted */ - reg_data = in_be32(addr + XEL_TSR_OFFSET); + reg_data = __raw_readl(addr + XEL_TSR_OFFSET); reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK); - out_be32(addr + XEL_TSR_OFFSET, reg_data); + __raw_writel(reg_data, addr + XEL_TSR_OFFSET); return 0; } @@ -408,7 +407,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use); /* Verify which buffer has valid data */ - reg_data = in_be32(addr + XEL_RSR_OFFSET); + reg_data = __raw_readl(addr + XEL_RSR_OFFSET); if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { if (drvdata->rx_ping_pong != 0) @@ -425,14 +424,14 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) return 0; /* No data was available */ /* Verify that buffer has valid data */ - reg_data = in_be32(addr + XEL_RSR_OFFSET); + reg_data = __raw_readl(addr + XEL_RSR_OFFSET); if ((reg_data & XEL_RSR_RECV_DONE_MASK) != XEL_RSR_RECV_DONE_MASK) return 0; /* No data was available */ } /* Get the protocol type of the ethernet frame that arrived */ - proto_type = ((ntohl(in_be32(addr + XEL_HEADER_OFFSET + + proto_type = ((ntohl(__raw_readl(addr + XEL_HEADER_OFFSET + XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) & XEL_RPLR_LENGTH_MASK); @@ -441,7 +440,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) { if (proto_type == ETH_P_IP) { - length = ((ntohl(in_be32(addr + + length = ((ntohl(__raw_readl(addr + XEL_HEADER_IP_LENGTH_OFFSET + XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) & @@ -463,9 +462,9 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) data, length); /* Acknowledge the frame */ - reg_data = in_be32(addr + XEL_RSR_OFFSET); + reg_data = __raw_readl(addr + XEL_RSR_OFFSET); reg_data &= ~XEL_RSR_RECV_DONE_MASK; - out_be32(addr + XEL_RSR_OFFSET, reg_data); + __raw_writel(reg_data, addr + XEL_RSR_OFFSET); return length; } @@ -492,14 +491,14 @@ static void xemaclite_update_address(struct net_local *drvdata, xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN); - out_be32(addr + XEL_TPLR_OFFSET, ETH_ALEN); + __raw_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET); /* Update the MAC address in the EmacLite */ - reg_data = in_be32(addr + XEL_TSR_OFFSET); - out_be32(addr + XEL_TSR_OFFSET, reg_data | XEL_TSR_PROG_MAC_ADDR); + reg_data = __raw_readl(addr + XEL_TSR_OFFSET); + __raw_writel(reg_data | XEL_TSR_PROG_MAC_ADDR, addr + XEL_TSR_OFFSET); /* Wait for EmacLite to finish with the MAC address update */ - while ((in_be32(addr + XEL_TSR_OFFSET) & + while ((__raw_readl(addr + XEL_TSR_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ; } @@ -669,31 +668,32 @@ static irqreturn_t xemaclite_interrupt(int irq, void *dev_id) u32 tx_status; /* Check if there is Rx Data available */ - if ((in_be32(base_addr + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK) || - (in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET) + if ((__raw_readl(base_addr + XEL_RSR_OFFSET) & + XEL_RSR_RECV_DONE_MASK) || + (__raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK)) xemaclite_rx_handler(dev); /* Check if the Transmission for the first buffer is completed */ - tx_status = in_be32(base_addr + XEL_TSR_OFFSET); + tx_status = __raw_readl(base_addr + XEL_TSR_OFFSET); if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; - out_be32(base_addr + XEL_TSR_OFFSET, tx_status); + __raw_writel(tx_status, base_addr + XEL_TSR_OFFSET); tx_complete = true; } /* Check if the Transmission for the second buffer is completed */ - tx_status = in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); + tx_status = __raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; - out_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, - tx_status); + __raw_writel(tx_status, base_addr + XEL_BUFFER_OFFSET + + XEL_TSR_OFFSET); tx_complete = true; } @@ -726,7 +726,7 @@ static int xemaclite_mdio_wait(struct net_local *lp) /* wait for the MDIO interface to not be busy or timeout after some time. */ - while (in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET) & + while (__raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET) & XEL_MDIOCTRL_MDIOSTS_MASK) { if (end - jiffies <= 0) { WARN_ON(1); @@ -762,17 +762,17 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg) * MDIO Address register. Set the Status bit in the MDIO Control * register to start a MDIO read transaction. */ - ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET); - out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET, - XEL_MDIOADDR_OP_MASK | - ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg)); - out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET, - ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK); + ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); + __raw_writel(XEL_MDIOADDR_OP_MASK | + ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), + lp->base_addr + XEL_MDIOADDR_OFFSET); + __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, + lp->base_addr + XEL_MDIOCTRL_OFFSET); if (xemaclite_mdio_wait(lp)) return -ETIMEDOUT; - rc = in_be32(lp->base_addr + XEL_MDIORD_OFFSET); + rc = __raw_readl(lp->base_addr + XEL_MDIORD_OFFSET); dev_dbg(&lp->ndev->dev, "xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n", @@ -809,13 +809,13 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg, * Data register. Finally, set the Status bit in the MDIO Control * register to start a MDIO write transaction. */ - ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET); - out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET, - ~XEL_MDIOADDR_OP_MASK & - ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg)); - out_be32(lp->base_addr + XEL_MDIOWR_OFFSET, val); - out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET, - ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK); + ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); + __raw_writel(~XEL_MDIOADDR_OP_MASK & + ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), + lp->base_addr + XEL_MDIOADDR_OFFSET); + __raw_writel(val, lp->base_addr + XEL_MDIOWR_OFFSET); + __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, + lp->base_addr + XEL_MDIOCTRL_OFFSET); return 0; } @@ -872,8 +872,8 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) /* Enable the MDIO bus by asserting the enable bit in MDIO Control * register. */ - out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET, - XEL_MDIOCTRL_MDIOEN_MASK); + __raw_writel(XEL_MDIOCTRL_MDIOEN_MASK, + lp->base_addr + XEL_MDIOCTRL_OFFSET); bus = mdiobus_alloc(); if (!bus) { @@ -1197,8 +1197,8 @@ static int xemaclite_of_probe(struct platform_device *ofdev) dev_warn(dev, "No MAC address found\n"); /* Clear the Tx CSR's in case this is a restart */ - out_be32(lp->base_addr + XEL_TSR_OFFSET, 0); - out_be32(lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, 0); + __raw_writel(0, lp->base_addr + XEL_TSR_OFFSET); + __raw_writel(0, lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); /* Set the MAC address in the EmacLite device */ xemaclite_update_address(lp, ndev->dev_addr); -- 2.30.2