From 1202d2318e2f370befe6c154db75ffaad3ec7ba0 Mon Sep 17 00:00:00 2001 From: Dan Murphy Date: Wed, 4 Dec 2019 11:51:11 -0600 Subject: [PATCH] dt-bindings: tcan4x5x: Make wake-gpio an optional gpio The wake-up of the device can be configured as an optional feature of the device. Move the wake-up gpio from a requried property to an optional property. Signed-off-by: Dan Murphy Cc: Rob Herring Reviewed-by: Sean Nyekjaer Tested-by: Sean Nyekjaer Signed-off-by: Marc Kleine-Budde --- Documentation/devicetree/bindings/net/can/tcan4x5x.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index e8aa21d9174e..6bdcc3f84bd3 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -10,7 +10,6 @@ Required properties: - #size-cells: 0 - spi-max-frequency: Maximum frequency of the SPI bus the chip can operate at should be less than or equal to 18 MHz. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. - interrupt-parent: the phandle to the interrupt controller which provides the interrupt. - interrupts: interrupt specification for data-ready. @@ -23,6 +22,7 @@ Optional properties: reset. - device-state-gpios: Input GPIO that indicates if the device is in a sleep state or if the device is active. + - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Example: tcan4x5x: tcan4x5x@0 { -- 2.30.2