From 119c964399559e4bbfda9cdd7161c499ddba1470 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 26 Jan 2015 14:28:56 +0000 Subject: [PATCH] staging: comedi: addi_apci_1032: add comedi driver comment Add a comedi driver comment in a form suitable for importing into Comedilib documentation. The information about the change-of-state subdevice has been pulled from other comments in the driver. Signed-off-by: Ian Abbott Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- .../staging/comedi/drivers/addi_apci_1032.c | 78 ++++++++++++------- 1 file changed, 48 insertions(+), 30 deletions(-) diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c index bf14165297b7..4911b627203b 100644 --- a/drivers/staging/comedi/drivers/addi_apci_1032.c +++ b/drivers/staging/comedi/drivers/addi_apci_1032.c @@ -22,6 +22,54 @@ * more details. */ +/* + * Driver: addi_apci_1032 + * Description: ADDI-DATA APCI-1032 Digital Input Board + * Author: ADDI-DATA GmbH , + * H Hartley Sweeten + * Status: untested + * Devices: [ADDI-DATA] APCI-1032 (addi_apci_1032) + * + * Configuration options: + * None; devices are configured automatically. + * + * This driver models the APCI-1032 as a 32-channel, digital input subdevice + * plus an additional digital input subdevice to handle change-of-state (COS) + * interrupts (if an interrupt handler can be set up successfully). + * + * The COS subdevice supports comedi asynchronous read commands. + * + * Change-Of-State (COS) interrupt configuration: + * + * Channels 0 to 15 are interruptible. These channels can be configured + * to generate interrupts based on AND/OR logic for the desired channels. + * + * OR logic: + * - reacts to rising or falling edges + * - interrupt is generated when any enabled channel meets the desired + * interrupt condition + * + * AND logic: + * - reacts to changes in level of the selected inputs + * - interrupt is generated when all enabled channels meet the desired + * interrupt condition + * - after an interrupt, a change in level must occur on the selected + * inputs to release the IRQ logic + * + * The COS subdevice must be configured before setting up a comedi + * asynchronous command: + * + * data[0] : INSN_CONFIG_DIGITAL_TRIG + * data[1] : trigger number (= 0) + * data[2] : configuration operation: + * - COMEDI_DIGITAL_TRIG_DISABLE = no interrupts + * - COMEDI_DIGITAL_TRIG_ENABLE_EDGES = OR (edge) interrupts + * - COMEDI_DIGITAL_TRIG_ENABLE_LEVELS = AND (level) interrupts + * data[3] : left-shift for data[4] and data[5] + * data[4] : rising-edge/high level channels + * data[5] : falling-edge/low level channels + */ + #include #include #include @@ -62,36 +110,6 @@ static int apci1032_reset(struct comedi_device *dev) return 0; } -/* - * Change-Of-State (COS) interrupt configuration - * - * Channels 0 to 15 are interruptible. These channels can be configured - * to generate interrupts based on AND/OR logic for the desired channels. - * - * OR logic - * - reacts to rising or falling edges - * - interrupt is generated when any enabled channel - * meet the desired interrupt condition - * - * AND logic - * - reacts to changes in level of the selected inputs - * - interrupt is generated when all enabled channels - * meet the desired interrupt condition - * - after an interrupt, a change in level must occur on - * the selected inputs to release the IRQ logic - * - * The COS interrupt must be configured before it can be enabled. - * - * data[0] : INSN_CONFIG_DIGITAL_TRIG - * data[1] : trigger number (= 0) - * data[2] : configuration operation: - * COMEDI_DIGITAL_TRIG_DISABLE = no interrupts - * COMEDI_DIGITAL_TRIG_ENABLE_EDGES = OR (edge) interrupts - * COMEDI_DIGITAL_TRIG_ENABLE_LEVELS = AND (level) interrupts - * data[3] : left-shift for data[4] and data[5] - * data[4] : rising-edge/high level channels - * data[5] : falling-edge/low level channels - */ static int apci1032_cos_insn_config(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, -- 2.30.2