From 0ffbef9317a1dc049ad259c1ec1530355efc0552 Mon Sep 17 00:00:00 2001 From: Shiji Yang Date: Fri, 5 May 2023 01:50:36 +0000 Subject: [PATCH] ath79: add support for D-Link DIR-859 A3 Specifications: SOC: QCA9563 775 MHz + QCA9880 Switch: QCA8337N-AL3C RAM: Winbond W9751G6KB-25 64 MiB Flash: Winbond W25Q128FVSG 16 MiB WLAN: Wi-Fi4 2.4 GHz 3*3 + 5 GHz 3*3 LAN: LAN ports *4 WAN: WAN port *1 Buttons: reset *1 + wps *1 LEDs: ethernet *5, power, wlan, wps MAC Address: use address source1 source2 label 40:9b:xx:xx:xx:3c lan && wlan u-boot,env@ethaddr lan 40:9b:xx:xx:xx:3c devdata@0x3f $label wan 40:9b:xx:xx:xx:3f devdata@0x8f $label + 3 wlan2g 40:9b:xx:xx:xx:3c devdata@0x5b $label wlan5g 40:9b:xx:xx:xx:3e devdata@0x76 $label + 2 Install via Web UI: Apply factory image in the stock firmware's Web UI. Install via Emergency Room Mode: DIR-859 A1 will enter recovery mode when the system fails to boot or press reset button for about 10 seconds. First, set computer IP to 192.168.0.5 and Gateway to 192.168.0.1. Then we can open http://192.168.0.1 in the web browser to upload OpenWrt factory image or stock firmware. Some modern browsers may need to turn on compatibility mode. Signed-off-by: Shiji Yang --- package/boot/uboot-envtools/files/ath79 | 1 + .../ath79/dts/qca9563_dlink_dir-859-a3.dts | 64 +++++++++++++++++++ .../ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi | 4 +- .../generic/base-files/etc/board.d/01_leds | 3 + .../generic/base-files/etc/board.d/02_network | 5 ++ .../etc/uci-defaults/09_fix-checksum | 1 + target/linux/ath79/image/generic.mk | 14 +++- 7 files changed, 88 insertions(+), 4 deletions(-) create mode 100644 target/linux/ath79/dts/qca9563_dlink_dir-859-a3.dts diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index 38fc663e709..7c30aa052a6 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -28,6 +28,7 @@ arduino,yun|\ buffalo,bhr-4grv2|\ devolo,magic-2-wifi|\ dlink,dir-859-a1|\ +dlink,dir-859-a3|\ dlink,dir-869-a1|\ engenius,eap1200h|\ engenius,eap1750h|\ diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-859-a3.dts b/target/linux/ath79/dts/qca9563_dlink_dir-859-a3.dts new file mode 100644 index 00000000000..164e0802f9f --- /dev/null +++ b/target/linux/ath79/dts/qca9563_dlink_dir-859-a3.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9563_dlink_dir-8x9-a1.dtsi" + +#include + +/ { + compatible = "dlink,dir-859-a3", "qca,qca9563"; + model = "D-Link DIR-859 A3"; + + aliases { + label-mac-device = &wmac; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "green:power"; + color = ; + function = LED_FUNCTION_POWER; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + wan { + color = ; + function = LED_FUNCTION_WAN; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + wlan { + color = ; + function = LED_FUNCTION_WLAN; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wps { + color = ; + function = LED_FUNCTION_WPS; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ath10k { + nvmem-cells = <&calibration_ath10k>, <&macaddr_bdcfg_ethaddr 2>; + nvmem-cell-names = "calibration", "mac-address"; +}; + +&bdcfg { + macaddr_bdcfg_ethaddr: ethaddr { + #nvmem-cell-cells = <1>; + }; +}; + +&wmac { + nvmem-cells = <&calibration_ath9k>, <&macaddr_bdcfg_ethaddr 0>; + nvmem-cell-names = "calibration", "mac-address"; +}; diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi b/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi index 754fcd415d9..3fd9790c4a2 100644 --- a/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi +++ b/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi @@ -28,7 +28,7 @@ &pcie { status = "okay"; - wifi@0,0 { + ath10k: wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; @@ -56,7 +56,7 @@ read-only; }; - partition@40000 { + bdcfg: partition@40000 { compatible = "u-boot,env"; label = "bdcfg"; reg = <0x040000 0x010000>; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index d3508049baa..2ee4ed2544d 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -234,6 +234,9 @@ dlink,dap-1365-a1) dlink,dir-859-a1) ucidef_set_led_switch "internet" "WAN" "green:internet" "switch0" "0x20" ;; +dlink,dir-859-a3) + ucidef_set_led_switch "wan" "WAN" "green:wan" "switch0" "0x20" + ;; engenius,ens202ext-v1|\ engenius,enstationac-v1) ucidef_set_rssimon "wlan0" "200000" "1" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 487467cd598..4f535f8a648 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -291,6 +291,7 @@ ath79_setup_interfaces() dlink,dir-842-c2|\ dlink,dir-842-c3|\ dlink,dir-859-a1|\ + dlink,dir-859-a3|\ dlink,dir-869-a1|\ engenius,epg5000|\ engenius,esr1200|\ @@ -661,6 +662,10 @@ ath79_setup_macs() lan_mac=$(mtd_get_mac_text "devdata" 0xc9) wan_mac=$(mtd_get_mac_text "devdata" 0x79) ;; + dlink,dir-859-a3) + lan_mac=$(get_mac_label) + wan_mac=$(macaddr_add "$lan_mac" 3) + ;; qihoo,c301|\ wd,mynet-n600|\ wd,mynet-n750) diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum index ad3db95a0c6..0ea81a8dc3a 100644 --- a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum +++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum @@ -23,6 +23,7 @@ dlink,dap-3662-a1) ;; dlink,dir-629-a1|\ dlink,dir-859-a1|\ +dlink,dir-859-a3|\ dlink,dir-869-a1|\ qihoo,c301) fix_seama_header diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index f8969a919c9..788520120de 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1143,18 +1143,28 @@ define Device/dlink_dir-842-c3 endef TARGET_DEVICES += dlink_dir-842-c3 -define Device/dlink_dir-859-a1 +define Device/dlink_dir-859-ax $(Device/seama) SOC := qca9563 DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-859 - DEVICE_VARIANT := A1 IMAGE_SIZE := 15872k DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct SEAMA_SIGNATURE := wrgac37_dlink.2013gui_dir859 endef + +define Device/dlink_dir-859-a1 + $(Device/dlink_dir-859-ax) + DEVICE_VARIANT := A1 +endef TARGET_DEVICES += dlink_dir-859-a1 +define Device/dlink_dir-859-a3 + $(Device/dlink_dir-859-ax) + DEVICE_VARIANT := A3 +endef +TARGET_DEVICES += dlink_dir-859-a3 + define Device/dlink_dir-869-a1 $(Device/seama) SOC := qca9563 -- 2.30.2