From 0fcb7901f9d61a325b4c5b88c600383bcbeb97fe Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 29 Sep 2014 20:06:41 +0200 Subject: [PATCH] tty: serial: 8250_dma: keep own book keeping about RX transfers MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit After dmaengine_terminate_all() has been invoked then both DMA drivers (edma and omap-dma) do not invoke dma_cookie_complete() to mark the transfer as complete. This dma_cookie_complete() is performed by the Synopsys DesignWare driver which is probably the only one that is used by omap8250-dma and hence don't see following problem… …which is that once a RX transfer has been terminated then following query of channel status reports DMA_IN_PROGRESS (again: the actual transfer has been canceled, there is nothing going on anymore). This means that serial8250_rx_dma() never enqueues another DMA transfer because it (wrongly) assumes that there is a transer already pending. Vinod Koul refuses to accept a patch which adds this dma_cookie_complete() to both drivers and so dmaengine_tx_status() would report DMA_COMPLETE instead (and behave like the Synopsys DesignWare driver already does). He argues that I am not allowed to use the cookie to query the status and that the driver already cleaned everything up after the invokation of dmaengine_terminate_all(). To end this I add a bookkeeping whether or not a RX-transfer has been started to the 8250-dma code. It has already been done for the TX side. *Now* we learn about the RX status based on our bookkeeping and don't need dmaengine_tx_status() for this anymore. Cc: vinod.koul@intel.com Reviewed-by: Tony Lindgren Tested-by: Tony Lindgren Signed-off-by: Sebastian Andrzej Siewior Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.h | 1 + drivers/tty/serial/8250/8250_dma.c | 10 ++++------ 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 2292a4202425..712d1600c206 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -42,6 +42,7 @@ struct uart_8250_dma { unsigned char tx_running:1; unsigned char tx_err: 1; + unsigned char rx_running:1; }; struct old_serial_port { diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index 69e54abb6e71..db9eda3c12d6 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -61,6 +61,7 @@ static void __dma_rx_complete(void *param) dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr, dma->rx_size, DMA_FROM_DEVICE); + dma->rx_running = 0; dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); dmaengine_terminate_all(dma->rxchan); @@ -123,10 +124,6 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir) { struct uart_8250_dma *dma = p->dma; struct dma_async_tx_descriptor *desc; - struct dma_tx_state state; - int dma_status; - - dma_status = dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); switch (iir & 0x3f) { case UART_IIR_RLSI: @@ -137,7 +134,7 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir) * If RCVR FIFO trigger level was not reached, complete the * transfer and let 8250_core copy the remaining data. */ - if (dma_status == DMA_IN_PROGRESS) { + if (dma->rx_running) { dmaengine_pause(dma->rxchan); __dma_rx_complete(p); } @@ -146,7 +143,7 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir) break; } - if (dma_status) + if (dma->rx_running) return 0; desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, @@ -155,6 +152,7 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir) if (!desc) return -EBUSY; + dma->rx_running = 1; desc->callback = __dma_rx_complete; desc->callback_param = p; -- 2.30.2