From 0fba32136579648a5782a41e93d4a79547456a89 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 23 Apr 2008 21:00:54 +0900 Subject: [PATCH] sh: use sci_out() for early printk Use sci_out() instead of ctrl_outw() for early printk setup code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/early_printk.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 957f25611543..18ca249e8409 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -141,6 +141,7 @@ static void scif_sercon_init(char *s) */ static void scif_sercon_init(char *s) { + struct uart_port *port = &scif_port; unsigned baud = DEFAULT_BAUD; char *e; @@ -160,19 +161,20 @@ static void scif_sercon_init(char *s) baud = DEFAULT_BAUD; } - ctrl_outw(0, scif_port.mapbase + 8); - ctrl_outw(0, scif_port.mapbase); + sci_out(port, SCSCR, 0); /* TE=0, RE=0 */ + sci_out(port, SCSMR, 0); /* Set baud rate */ - ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) / - (32 * baud) - 1, scif_port.mapbase + 4); - - ctrl_outw(12, scif_port.mapbase + 24); - ctrl_outw(8, scif_port.mapbase + 24); - ctrl_outw(0, scif_port.mapbase + 32); - ctrl_outw(0x60, scif_port.mapbase + 16); - ctrl_outw(0, scif_port.mapbase + 36); - ctrl_outw(0x30, scif_port.mapbase + 8); + sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) / + (32 * baud) - 1); + + sci_out(port, SCFCR, 12); + sci_out(port, SCFCR, 8); + + sci_out(port, SCSPTR, 0); + sci_out(port, SCxSR, 0x60); + sci_out(port, SCLSR, 0); + sci_out(port, SCSCR, 0x30); /* TE=1, RE=1 */ } #endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */ #endif /* !defined(CONFIG_SH_STANDARD_BIOS) */ -- 2.30.2