From 0fb28811dd6ff30aec3cd386745309aa63d1d106 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 22 Apr 2014 23:26:14 +0200 Subject: [PATCH] ARM: orion5x: move interrupt controller node into ocp The interrupt controller node was located outside of the ocp@f1000000 node, which doesn't make much sense: like any other device, the interrupt controller has registers located in the "Internal Registers Window", so it is much more logical to have it under the ocp@f1000000 node. It is even more important as we are going to move Orion5x to use the Device Tree binding of the mvebu-mbus driver. Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1398202002-28530-11-git-send-email-thomas.petazzoni@free-electrons.com Acked-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper --- arch/arm/boot/dts/orion5x.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 174d89241f70..da57fb9f87b9 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -17,13 +17,6 @@ gpio0 = &gpio0; }; - intc: interrupt-controller { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020200 0x08>; - }; - ocp@f1000000 { compatible = "simple-bus"; ranges = <0x00000000 0xf1000000 0x4000000 @@ -79,6 +72,13 @@ status = "disabled"; }; + intc: interrupt-controller@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x08>; + }; + wdt@20300 { compatible = "marvell,orion-wdt"; reg = <0x20300 0x28>; -- 2.30.2