From 0f77ba73533ab9ae3845f4c7439d340dcafef7ad Mon Sep 17 00:00:00 2001 From: Ravikumar Nelavelli Date: Fri, 30 May 2014 19:06:24 +0530 Subject: [PATCH] be2net: fixup TX-rate setting code for Skyhawk-R Skyhawk-R FW supports TX-rate setting only as a % value of the link speed, set via the SET_PROFILE_CONFIG cmd. This patch makes the necessary changes to the FW cmd descriptors to support the above change and also introduces checks in be_set_vf_tx_rate() to allow only discrete values (that map to % of the link-speed). Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 40 +++++++++---- drivers/net/ethernet/emulex/benet/be_cmds.h | 13 ++-- drivers/net/ethernet/emulex/benet/be_main.c | 66 ++++++++++++++------- 3 files changed, 81 insertions(+), 38 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 476752d0a6a4..216463bd128b 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -3562,33 +3562,47 @@ void be_reset_nic_desc(struct be_nic_res_desc *nic) nic->cq_count = 0xFFFF; nic->toe_conn_count = 0xFFFF; nic->eq_count = 0xFFFF; + nic->iface_count = 0xFFFF; nic->link_param = 0xFF; + nic->channel_id_param = cpu_to_le16(0xF000); nic->acpi_params = 0xFF; nic->wol_param = 0x0F; - nic->bw_min = 0xFFFFFFFF; + nic->tunnel_iface_count = 0xFFFF; + nic->direct_tenant_iface_count = 0xFFFF; nic->bw_max = 0xFFFFFFFF; } -int be_cmd_config_qos(struct be_adapter *adapter, u32 bps, u8 domain) +int be_cmd_config_qos(struct be_adapter *adapter, u32 max_rate, u16 link_speed, + u8 domain) { - if (lancer_chip(adapter)) { - struct be_nic_res_desc nic_desc; + struct be_nic_res_desc nic_desc; + u32 bw_percent; + u16 version = 0; + + if (BE3_chip(adapter)) + return be_cmd_set_qos(adapter, max_rate / 10, domain); - be_reset_nic_desc(&nic_desc); + be_reset_nic_desc(&nic_desc); + nic_desc.pf_num = adapter->pf_number; + nic_desc.vf_num = domain; + if (lancer_chip(adapter)) { nic_desc.hdr.desc_type = NIC_RESOURCE_DESC_TYPE_V0; nic_desc.hdr.desc_len = RESOURCE_DESC_SIZE_V0; nic_desc.flags = (1 << QUN_SHIFT) | (1 << IMM_SHIFT) | (1 << NOSV_SHIFT); - nic_desc.pf_num = adapter->pf_number; - nic_desc.vf_num = domain; - nic_desc.bw_max = cpu_to_le32(bps); - - return be_cmd_set_profile_config(adapter, &nic_desc, - RESOURCE_DESC_SIZE_V0, - 0, domain); + nic_desc.bw_max = cpu_to_le32(max_rate / 10); } else { - return be_cmd_set_qos(adapter, bps, domain); + version = 1; + nic_desc.hdr.desc_type = NIC_RESOURCE_DESC_TYPE_V1; + nic_desc.hdr.desc_len = RESOURCE_DESC_SIZE_V1; + nic_desc.flags = (1 << IMM_SHIFT) | (1 << NOSV_SHIFT); + bw_percent = max_rate ? (max_rate * 100) / link_speed : 100; + nic_desc.bw_max = cpu_to_le32(bw_percent); } + + return be_cmd_set_profile_config(adapter, &nic_desc, + nic_desc.hdr.desc_len, + version, domain); } int be_cmd_manage_iface(struct be_adapter *adapter, u32 iface, u8 op) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h index 228d4b611084..9df9d3bfe907 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.h +++ b/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -1891,16 +1891,20 @@ struct be_nic_res_desc { u16 cq_count; u16 toe_conn_count; u16 eq_count; - u32 rsvd5; + u16 vlan_id; + u16 iface_count; u32 cap_flags; u8 link_param; - u8 rsvd6[3]; + u8 rsvd6; + u16 channel_id_param; u32 bw_min; u32 bw_max; u8 acpi_params; u8 wol_param; u16 rsvd7; - u32 rsvd8[7]; + u16 tunnel_iface_count; + u16 direct_tenant_iface_count; + u32 rsvd8[6]; } __packed; /************ Multi-Channel type ***********/ @@ -2101,7 +2105,8 @@ int be_cmd_get_seeprom_data(struct be_adapter *adapter, int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num, u8 loopback_type, u8 enable); int be_cmd_get_phy_info(struct be_adapter *adapter); -int be_cmd_config_qos(struct be_adapter *adapter, u32 bps, u8 domain); +int be_cmd_config_qos(struct be_adapter *adapter, u32 max_rate, + u16 link_speed, u8 domain); void be_detect_error(struct be_adapter *adapter); int be_cmd_get_die_temperature(struct be_adapter *adapter); int be_cmd_get_cntl_attributes(struct be_adapter *adapter); diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 9116d5e26dab..d39a1c611b3b 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1352,7 +1352,10 @@ static int be_set_vf_tx_rate(struct net_device *netdev, int vf, int min_tx_rate, int max_tx_rate) { struct be_adapter *adapter = netdev_priv(netdev); - int status = 0; + struct device *dev = &adapter->pdev->dev; + int percent_rate, status = 0; + u16 link_speed = 0; + u8 link_status; if (!sriov_enabled(adapter)) return -EPERM; @@ -1363,18 +1366,47 @@ static int be_set_vf_tx_rate(struct net_device *netdev, int vf, if (min_tx_rate) return -EINVAL; - if (max_tx_rate < 100 || max_tx_rate > 10000) { - dev_err(&adapter->pdev->dev, - "max tx rate must be between 100 and 10000 Mbps\n"); - return -EINVAL; + if (!max_tx_rate) + goto config_qos; + + status = be_cmd_link_status_query(adapter, &link_speed, + &link_status, 0); + if (status) + goto err; + + if (!link_status) { + dev_err(dev, "TX-rate setting not allowed when link is down\n"); + status = -EPERM; + goto err; + } + + if (max_tx_rate < 100 || max_tx_rate > link_speed) { + dev_err(dev, "TX-rate must be between 100 and %d Mbps\n", + link_speed); + status = -EINVAL; + goto err; } - status = be_cmd_config_qos(adapter, max_tx_rate / 10, vf + 1); + /* On Skyhawk the QOS setting must be done only as a % value */ + percent_rate = link_speed / 100; + if (skyhawk_chip(adapter) && (max_tx_rate % percent_rate)) { + dev_err(dev, "TX-rate must be a multiple of %d Mbps\n", + percent_rate); + status = -EINVAL; + goto err; + } + +config_qos: + status = be_cmd_config_qos(adapter, max_tx_rate, link_speed, vf + 1); if (status) - dev_err(&adapter->pdev->dev, - "max tx rate %d on VF %d failed\n", max_tx_rate, vf); - else - adapter->vf_cfg[vf].tx_rate = max_tx_rate; + goto err; + + adapter->vf_cfg[vf].tx_rate = max_tx_rate; + return 0; + +err: + dev_err(dev, "TX-rate setting of %dMbps on VF%d failed\n", + max_tx_rate, vf); return status; } static int be_set_vf_link_state(struct net_device *netdev, int vf, @@ -3135,7 +3167,6 @@ static int be_vf_setup(struct be_adapter *adapter) struct be_vf_cfg *vf_cfg; int status, old_vfs, vf; u32 privileges; - u16 lnk_speed; old_vfs = pci_num_vf(adapter->pdev); if (old_vfs) { @@ -3191,16 +3222,9 @@ static int be_vf_setup(struct be_adapter *adapter) vf); } - /* BE3 FW, by default, caps VF TX-rate to 100mbps. - * Allow full available bandwidth - */ - if (BE3_chip(adapter) && !old_vfs) - be_cmd_config_qos(adapter, 1000, vf + 1); - - status = be_cmd_link_status_query(adapter, &lnk_speed, - NULL, vf + 1); - if (!status) - vf_cfg->tx_rate = lnk_speed; + /* Allow full available bandwidth */ + if (!old_vfs) + be_cmd_config_qos(adapter, 0, 0, vf + 1); if (!old_vfs) { be_cmd_enable_vf(adapter, vf + 1); -- 2.30.2